First arm pullreq for 6.1 cycle. The big stuff here is RTH's alignment series. thanks -- PMM The following changes since commit ccdf06c1db192152ac70a1dd974c624f566cb7d4: Open 6.1 development tree (2021-04-30 11:15:40 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210430 for you to fetch changes up to a6091108aa44e9017af4ca13c43f55a629e3744c: hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows (2021-04-30 11:16:52 +0100) ---------------------------------------------------------------- target-arm queue: * hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows * hw: add compat machines for 6.1 * Fault misaligned accesses where the architecture requires it * Fix some corner cases of MTE faults (notably with misaligned accesses) * Make Thumb store insns UNDEF for Rn==1111 * hw/arm/smmuv3: Support 16K translation granule ---------------------------------------------------------------- Cornelia Huck (1): hw: add compat machines for 6.1 Kunkun Jiang (1): hw/arm/smmuv3: Support 16K translation granule Peter Maydell (2): target/arm: Make Thumb store insns UNDEF for Rn==1111 hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows Richard Henderson (39): target/arm: Fix mte_checkN target/arm: Split out mte_probe_int target/arm: Fix unaligned checks for mte_check1, mte_probe1 test/tcg/aarch64: Add mte-5 target/arm: Replace MTEDESC ESIZE+TSIZE with SIZEM1 target/arm: Merge mte_check1, mte_checkN target/arm: Rename mte_probe1 to mte_probe target/arm: Simplify sve mte checking target/arm: Remove log2_esize parameter to gen_mte_checkN target/arm: Fix decode of align in VLDST_single target/arm: Rename TBFLAG_A32, SCTLR_B target/arm: Rename TBFLAG_ANY, PSTATE_SS target/arm: Add wrapper macros for accessing tbflags target/arm: Introduce CPUARMTBFlags target/arm: Move mode specific TB flags to tb->cs_base target/arm: Move TBFLAG_AM32 bits to the top target/arm: Move TBFLAG_ANY bits to the bottom target/arm: Add ALIGN_MEM to TBFLAG_ANY target/arm: Adjust gen_aa32_{ld, st}_i32 for align+endianness target/arm: Merge gen_aa32_frob64 into gen_aa32_ld_i64 target/arm: Fix SCTLR_B test for TCGv_i64 load/store target/arm: Adjust gen_aa32_{ld, st}_i64 for align+endianness target/arm: Enforce word alignment for LDRD/STRD target/arm: Enforce alignment for LDA/LDAH/STL/STLH target/arm: Enforce alignment for LDM/STM target/arm: Enforce alignment for RFE target/arm: Enforce alignment for SRS target/arm: Enforce alignment for VLDM/VSTM target/arm: Enforce alignment for VLDR/VSTR target/arm: Enforce alignment for VLDn (all lanes) target/arm: Enforce alignment for VLDn/VSTn (multiple) target/arm: Enforce alignment for VLDn/VSTn (single) target/arm: Use finalize_memop for aa64 gpr load/store target/arm: Use finalize_memop for aa64 fpr load/store target/arm: Enforce alignment for aa64 load-acq/store-rel target/arm: Use MemOp for size + endian in aa64 vector ld/st target/arm: Enforce alignment for aa64 vector LDn/STn (multiple) target/arm: Enforce alignment for aa64 vector LDn/STn (single) target/arm: Enforce alignment for sve LD1R include/hw/boards.h | 3 + include/hw/i386/pc.h | 3 + include/hw/pci-host/gpex.h | 4 + target/arm/cpu.h | 105 ++++++++++----- target/arm/helper-a64.h | 3 +- target/arm/internals.h | 11 +- target/arm/translate-a64.h | 2 +- target/arm/translate.h | 38 ++++++ target/arm/neon-ls.decode | 4 +- hw/arm/smmuv3.c | 6 +- hw/arm/virt.c | 7 +- hw/core/machine.c | 5 + hw/i386/pc.c | 3 + hw/i386/pc_piix.c | 14 +- hw/i386/pc_q35.c | 13 +- hw/pci-host/gpex.c | 56 +++++++- hw/ppc/spapr.c | 17 ++- hw/s390x/s390-virtio-ccw.c | 14 +- target/arm/helper-a64.c | 2 +- target/arm/helper.c | 162 ++++++++++++---------- target/arm/mte_helper.c | 185 ++++++++++--------------- target/arm/sve_helper.c | 100 +++++--------- target/arm/translate-a64.c | 236 ++++++++++++++++---------------- target/arm/translate-sve.c | 11 +- target/arm/translate.c | 274 ++++++++++++++++++++++---------------- tests/tcg/aarch64/mte-5.c | 44 ++++++ target/arm/translate-neon.c.inc | 117 ++++++++++++---- target/arm/translate-vfp.c.inc | 20 +-- tests/tcg/aarch64/Makefile.target | 2 +- 29 files changed, 878 insertions(+), 583 deletions(-) create mode 100644 tests/tcg/aarch64/mte-5.c From: Kunkun Jiang <jiangkunkun@huawei.com> The driver can query some bits in SMMUv3 IDR5 to learn which translation granules are supported. Arm recommends that SMMUv3 implementations support at least 4K and 64K granules. But in the vSMMUv3, there seems to be no reason not to support 16K translation granule. In addition, if 16K is not supported, vSVA will failed to be enabled in the future for 16K guest kernel. So it'd better to support it. Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, HAD, 1); - /* 4K and 64K granule support */ + /* 4K, 16K and 64K granule support */ s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN4K, 1); + s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN16K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN64K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ @@ -XXX,XX +XXX,XX @@ static int decode_cd(SMMUTransCfg *cfg, CD *cd, SMMUEventInfo *event) tg = CD_TG(cd, i); tt->granule_sz = tg2granule(tg, i); - if ((tt->granule_sz != 12 && tt->granule_sz != 16) || CD_ENDI(cd)) { + if ((tt->granule_sz != 12 && tt->granule_sz != 14 && + tt->granule_sz != 16) || CD_ENDI(cd)) { goto bad_cd; } -- 2.20.1 The Arm ARM specifies that for Thumb encodings of the various plain store insns, if the Rn field is 1111 then we must UNDEF. This is different from the Arm encodings, where this case is either UNPREDICTABLE or has well-defined behaviour. The exclusive stores, store-release and STRD do not have this UNDEF case for any encoding. Enforce the UNDEF for this case in the Thumb plain store insns. Fixes: https://bugs.launchpad.net/qemu/+bug/1922887 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210408162402.5822-1-peter.maydell@linaro.org --- target/arm/translate.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool op_store_rr(DisasContext *s, arg_ldst_rr *a, ISSInfo issinfo = make_issinfo(s, a->rt, a->p, a->w) | ISSIsWrite; TCGv_i32 addr, tmp; + /* + * In Thumb encodings of stores Rn=1111 is UNDEF; for Arm it + * is either UNPREDICTABLE or has defined behaviour + */ + if (s->thumb && a->rn == 15) { + return false; + } + addr = op_addr_rr_pre(s, a); tmp = load_reg(s, a->rt); @@ -XXX,XX +XXX,XX @@ static bool op_store_ri(DisasContext *s, arg_ldst_ri *a, ISSInfo issinfo = make_issinfo(s, a->rt, a->p, a->w) | ISSIsWrite; TCGv_i32 addr, tmp; + /* + * In Thumb encodings of stores Rn=1111 is UNDEF; for Arm it + * is either UNPREDICTABLE or has defined behaviour + */ + if (s->thumb && a->rn == 15) { + return false; + } + addr = op_addr_ri_pre(s, a); tmp = load_reg(s, a->rt); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We were incorrectly assuming that only the first byte of an MTE access is checked against the tags. But per the ARM, unaligned accesses are pre-decomposed into single-byte accesses. So by the time we reach the actual MTE check in the ARM pseudocode, all accesses are aligned. Therefore, the first failure is always either the first byte of the access, or the first byte of the granule. In addition, some of the arithmetic is off for last-first -> count. This does not become directly visible until a later patch that passes single bytes into this function, so ptr == ptr_last. Buglink: https://bugs.launchpad.net/bugs/1921948 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked a comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 40 ++++++++++++++++++---------------------- 1 file changed, 18 insertions(+), 22 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra) { int mmu_idx, ptr_tag, bit55; - uint64_t ptr_last, ptr_end, prev_page, next_page; - uint64_t tag_first, tag_end; - uint64_t tag_byte_first, tag_byte_end; - uint32_t esize, total, tag_count, tag_size, n, c; + uint64_t ptr_last, prev_page, next_page; + uint64_t tag_first, tag_last; + uint64_t tag_byte_first, tag_byte_last; + uint32_t total, tag_count, tag_size, n, c; uint8_t *mem1, *mem2; MMUAccessType type; @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); type = FIELD_EX32(desc, MTEDESC, WRITE) ? MMU_DATA_STORE : MMU_DATA_LOAD; - esize = FIELD_EX32(desc, MTEDESC, ESIZE); total = FIELD_EX32(desc, MTEDESC, TSIZE); - /* Find the addr of the end of the access, and of the last element. */ - ptr_end = ptr + total; - ptr_last = ptr_end - esize; + /* Find the addr of the end of the access */ + ptr_last = ptr + total - 1; /* Round the bounds to the tag granule, and compute the number of tags. */ tag_first = QEMU_ALIGN_DOWN(ptr, TAG_GRANULE); - tag_end = QEMU_ALIGN_UP(ptr_last, TAG_GRANULE); - tag_count = (tag_end - tag_first) / TAG_GRANULE; + tag_last = QEMU_ALIGN_DOWN(ptr_last, TAG_GRANULE); + tag_count = ((tag_last - tag_first) / TAG_GRANULE) + 1; /* Round the bounds to twice the tag granule, and compute the bytes. */ tag_byte_first = QEMU_ALIGN_DOWN(ptr, 2 * TAG_GRANULE); - tag_byte_end = QEMU_ALIGN_UP(ptr_last, 2 * TAG_GRANULE); + tag_byte_last = QEMU_ALIGN_DOWN(ptr_last, 2 * TAG_GRANULE); /* Locate the page boundaries. */ prev_page = ptr & TARGET_PAGE_MASK; next_page = prev_page + TARGET_PAGE_SIZE; - if (likely(tag_end - prev_page <= TARGET_PAGE_SIZE)) { + if (likely(tag_last - prev_page <= TARGET_PAGE_SIZE)) { /* Memory access stays on one page. */ - tag_size = (tag_byte_end - tag_byte_first) / (2 * TAG_GRANULE); + tag_size = ((tag_byte_last - tag_byte_first) / (2 * TAG_GRANULE)) + 1; mem1 = allocation_tag_mem(env, mmu_idx, ptr, type, total, MMU_DATA_LOAD, tag_size, ra); if (!mem1) { @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, mem1 = allocation_tag_mem(env, mmu_idx, ptr, type, next_page - ptr, MMU_DATA_LOAD, tag_size, ra); - tag_size = (tag_byte_end - next_page) / (2 * TAG_GRANULE); + tag_size = ((tag_byte_last - next_page) / (2 * TAG_GRANULE)) + 1; mem2 = allocation_tag_mem(env, mmu_idx, next_page, type, - ptr_end - next_page, + ptr_last - next_page + 1, MMU_DATA_LOAD, tag_size, ra); /* @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, } /* - * If we failed, we know which granule. Compute the element that - * is first in that granule, and signal failure on that element. + * If we failed, we know which granule. For the first granule, the + * failure address is @ptr, the first byte accessed. Otherwise the + * failure address is the first byte of the nth granule. */ if (unlikely(n < tag_count)) { - uint64_t fail_ofs; - - fail_ofs = tag_first + n * TAG_GRANULE - ptr; - fail_ofs = ROUND_UP(fail_ofs, esize); - mte_check_fail(env, desc, ptr + fail_ofs, ra); + uint64_t fault = (n == 0 ? ptr : tag_first + n * TAG_GRANULE); + mte_check_fail(env, desc, fault, ra); } done: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Split out a helper function from mte_checkN to perform all of the checking and address manpulation. So far, just use this in mte_checkN itself. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 52 +++++++++++++++++++++++++++++++---------- 1 file changed, 40 insertions(+), 12 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static int checkN(uint8_t *mem, int odd, int cmp, int count) return n; } -uint64_t mte_checkN(CPUARMState *env, uint32_t desc, - uint64_t ptr, uintptr_t ra) +/** + * mte_probe_int() - helper for mte_probe and mte_check + * @env: CPU environment + * @desc: MTEDESC descriptor + * @ptr: virtual address of the base of the access + * @fault: return virtual address of the first check failure + * + * Internal routine for both mte_probe and mte_check. + * Return zero on failure, filling in *fault. + * Return negative on trivial success for tbi disabled. + * Return positive on success with tbi enabled. + */ +static int mte_probe_int(CPUARMState *env, uint32_t desc, uint64_t ptr, + uintptr_t ra, uint32_t total, uint64_t *fault) { int mmu_idx, ptr_tag, bit55; uint64_t ptr_last, prev_page, next_page; uint64_t tag_first, tag_last; uint64_t tag_byte_first, tag_byte_last; - uint32_t total, tag_count, tag_size, n, c; + uint32_t tag_count, tag_size, n, c; uint8_t *mem1, *mem2; MMUAccessType type; bit55 = extract64(ptr, 55, 1); + *fault = ptr; /* If TBI is disabled, the access is unchecked, and ptr is not dirty. */ if (unlikely(!tbi_check(desc, bit55))) { - return ptr; + return -1; } ptr_tag = allocation_tag_from_addr(ptr); if (tcma_check(desc, bit55, ptr_tag)) { - goto done; + return 1; } mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); type = FIELD_EX32(desc, MTEDESC, WRITE) ? MMU_DATA_STORE : MMU_DATA_LOAD; - total = FIELD_EX32(desc, MTEDESC, TSIZE); /* Find the addr of the end of the access */ ptr_last = ptr + total - 1; @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, mem1 = allocation_tag_mem(env, mmu_idx, ptr, type, total, MMU_DATA_LOAD, tag_size, ra); if (!mem1) { - goto done; + return 1; } /* Perform all of the comparisons. */ n = checkN(mem1, ptr & TAG_GRANULE, ptr_tag, tag_count); @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, } if (n == c) { if (!mem2) { - goto done; + return 1; } n += checkN(mem2, 0, ptr_tag, tag_count - c); } } + if (likely(n == tag_count)) { + return 1; + } + /* * If we failed, we know which granule. For the first granule, the * failure address is @ptr, the first byte accessed. Otherwise the * failure address is the first byte of the nth granule. */ - if (unlikely(n < tag_count)) { - uint64_t fault = (n == 0 ? ptr : tag_first + n * TAG_GRANULE); - mte_check_fail(env, desc, fault, ra); + if (n > 0) { + *fault = tag_first + n * TAG_GRANULE; } + return 0; +} - done: +uint64_t mte_checkN(CPUARMState *env, uint32_t desc, + uint64_t ptr, uintptr_t ra) +{ + uint64_t fault; + uint32_t total = FIELD_EX32(desc, MTEDESC, TSIZE); + int ret = mte_probe_int(env, desc, ptr, ra, total, &fault); + + if (unlikely(ret == 0)) { + mte_check_fail(env, desc, fault, ra); + } else if (ret < 0) { + return ptr; + } return useronly_clean_ptr(ptr); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We were incorrectly assuming that only the first byte of an MTE access is checked against the tags. But per the ARM, unaligned accesses are pre-decomposed into single-byte accesses. So by the time we reach the actual MTE check in the ARM pseudocode, all accesses are aligned. We cannot tell a priori whether or not a given scalar access is aligned, therefore we must at least check. Use mte_probe_int, which is already set up for checking multiple granules. Buglink: https://bugs.launchpad.net/bugs/1921948 Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 109 +++++++++++++--------------------------- 1 file changed, 35 insertions(+), 74 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc, } } -/* - * Perform an MTE checked access for a single logical or atomic access. - */ -static bool mte_probe1_int(CPUARMState *env, uint32_t desc, uint64_t ptr, - uintptr_t ra, int bit55) -{ - int mem_tag, mmu_idx, ptr_tag, size; - MMUAccessType type; - uint8_t *mem; - - ptr_tag = allocation_tag_from_addr(ptr); - - if (tcma_check(desc, bit55, ptr_tag)) { - return true; - } - - mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); - type = FIELD_EX32(desc, MTEDESC, WRITE) ? MMU_DATA_STORE : MMU_DATA_LOAD; - size = FIELD_EX32(desc, MTEDESC, ESIZE); - - mem = allocation_tag_mem(env, mmu_idx, ptr, type, size, - MMU_DATA_LOAD, 1, ra); - if (!mem) { - return true; - } - - mem_tag = load_tag1(ptr, mem); - return ptr_tag == mem_tag; -} - -/* - * No-fault version of mte_check1, to be used by SVE for MemSingleNF. - * Returns false if the access is Checked and the check failed. This - * is only intended to probe the tag -- the validity of the page must - * be checked beforehand. - */ -bool mte_probe1(CPUARMState *env, uint32_t desc, uint64_t ptr) -{ - int bit55 = extract64(ptr, 55, 1); - - /* If TBI is disabled, the access is unchecked. */ - if (unlikely(!tbi_check(desc, bit55))) { - return true; - } - - return mte_probe1_int(env, desc, ptr, 0, bit55); -} - -uint64_t mte_check1(CPUARMState *env, uint32_t desc, - uint64_t ptr, uintptr_t ra) -{ - int bit55 = extract64(ptr, 55, 1); - - /* If TBI is disabled, the access is unchecked, and ptr is not dirty. */ - if (unlikely(!tbi_check(desc, bit55))) { - return ptr; - } - - if (unlikely(!mte_probe1_int(env, desc, ptr, ra, bit55))) { - mte_check_fail(env, desc, ptr, ra); - } - - return useronly_clean_ptr(ptr); -} - -uint64_t HELPER(mte_check1)(CPUARMState *env, uint32_t desc, uint64_t ptr) -{ - return mte_check1(env, desc, ptr, GETPC()); -} - -/* - * Perform an MTE checked access for multiple logical accesses. - */ - /** * checkN: * @tag: tag memory to test @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(mte_checkN)(CPUARMState *env, uint32_t desc, uint64_t ptr) return mte_checkN(env, desc, ptr, GETPC()); } +uint64_t mte_check1(CPUARMState *env, uint32_t desc, + uint64_t ptr, uintptr_t ra) +{ + uint64_t fault; + uint32_t total = FIELD_EX32(desc, MTEDESC, ESIZE); + int ret = mte_probe_int(env, desc, ptr, ra, total, &fault); + + if (unlikely(ret == 0)) { + mte_check_fail(env, desc, fault, ra); + } else if (ret < 0) { + return ptr; + } + return useronly_clean_ptr(ptr); +} + +uint64_t HELPER(mte_check1)(CPUARMState *env, uint32_t desc, uint64_t ptr) +{ + return mte_check1(env, desc, ptr, GETPC()); +} + +/* + * No-fault version of mte_check1, to be used by SVE for MemSingleNF. + * Returns false if the access is Checked and the check failed. This + * is only intended to probe the tag -- the validity of the page must + * be checked beforehand. + */ +bool mte_probe1(CPUARMState *env, uint32_t desc, uint64_t ptr) +{ + uint64_t fault; + uint32_t total = FIELD_EX32(desc, MTEDESC, ESIZE); + int ret = mte_probe_int(env, desc, ptr, 0, total, &fault); + + return ret != 0; +} + /* * Perform an MTE checked access for DC_ZVA. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Buglink: https://bugs.launchpad.net/bugs/1921948 Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/mte-5.c | 44 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 2 +- 2 files changed, 45 insertions(+), 1 deletion(-) create mode 100644 tests/tcg/aarch64/mte-5.c diff --git a/tests/tcg/aarch64/mte-5.c b/tests/tcg/aarch64/mte-5.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-5.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, faulting unaligned access. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +void pass(int sig, siginfo_t *info, void *uc) +{ + assert(info->si_code == SEGV_MTESERR); + exit(0); +} + +int main(int ac, char **av) +{ + struct sigaction sa; + void *p0, *p1, *p2; + long excl = 1; + + enable_mte(PR_MTE_TCF_SYNC); + p0 = alloc_mte_mem(sizeof(*p0)); + + /* Create two differently tagged pointers. */ + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(excl)); + asm("gmi %0,%1,%0" : "+r"(excl) : "r" (p1)); + assert(excl != 1); + asm("irg %0,%1,%2" : "=r"(p2) : "r"(p0), "r"(excl)); + assert(p1 != p2); + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = pass; + sa.sa_flags = SA_SIGINFO; + sigaction(SIGSEGV, &sa, NULL); + + /* Store store two different tags in sequential granules. */ + asm("stg %0, [%0]" : : "r"(p1)); + asm("stg %0, [%0]" : : "r"(p2 + 16)); + + /* Perform an unaligned load crossing the granules. */ + asm volatile("ldr %0, [%1]" : "=r"(p0) : "r"(p1 + 12)); + abort(); +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ AARCH64_TESTS += bti-2 # MTE Tests ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_MTE),) -AARCH64_TESTS += mte-1 mte-2 mte-3 mte-4 mte-6 +AARCH64_TESTS += mte-1 mte-2 mte-3 mte-4 mte-5 mte-6 mte-%: CFLAGS += -march=armv8.5-a+memtag endif -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> After recent changes, mte_checkN does not use ESIZE, and mte_check1 never used TSIZE. We can combine the two into a single field: SIZEM1. Choose to pass size - 1 because size == 0 is never used, our immediate need in mte_probe_int is for the address of the last byte (ptr + size - 1), and since almost all operations are powers of 2, this makes the immediate constant one bit smaller. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 4 ++-- target/arm/mte_helper.c | 18 ++++++++---------- target/arm/translate-a64.c | 5 ++--- target/arm/translate-sve.c | 5 ++--- 4 files changed, 14 insertions(+), 18 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #define TARGET_ARM_INTERNALS_H #include "hw/registerfields.h" +#include "tcg/tcg-gvec-desc.h" #include "syndrome.h" /* register banks for CPU modes */ @@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, MIDX, 0, 4) FIELD(MTEDESC, TBI, 4, 2) FIELD(MTEDESC, TCMA, 6, 2) FIELD(MTEDESC, WRITE, 8, 1) -FIELD(MTEDESC, ESIZE, 9, 5) -FIELD(MTEDESC, TSIZE, 14, 10) /* mte_checkN only */ +FIELD(MTEDESC, SIZEM1, 9, SIMD_DATA_BITS - 9) /* size - 1 */ bool mte_probe1(CPUARMState *env, uint32_t desc, uint64_t ptr); uint64_t mte_check1(CPUARMState *env, uint32_t desc, diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static int checkN(uint8_t *mem, int odd, int cmp, int count) * Return positive on success with tbi enabled. */ static int mte_probe_int(CPUARMState *env, uint32_t desc, uint64_t ptr, - uintptr_t ra, uint32_t total, uint64_t *fault) + uintptr_t ra, uint64_t *fault) { int mmu_idx, ptr_tag, bit55; uint64_t ptr_last, prev_page, next_page; uint64_t tag_first, tag_last; uint64_t tag_byte_first, tag_byte_last; - uint32_t tag_count, tag_size, n, c; + uint32_t sizem1, tag_count, tag_size, n, c; uint8_t *mem1, *mem2; MMUAccessType type; @@ -XXX,XX +XXX,XX @@ static int mte_probe_int(CPUARMState *env, uint32_t desc, uint64_t ptr, mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); type = FIELD_EX32(desc, MTEDESC, WRITE) ? MMU_DATA_STORE : MMU_DATA_LOAD; + sizem1 = FIELD_EX32(desc, MTEDESC, SIZEM1); /* Find the addr of the end of the access */ - ptr_last = ptr + total - 1; + ptr_last = ptr + sizem1; /* Round the bounds to the tag granule, and compute the number of tags. */ tag_first = QEMU_ALIGN_DOWN(ptr, TAG_GRANULE); @@ -XXX,XX +XXX,XX @@ static int mte_probe_int(CPUARMState *env, uint32_t desc, uint64_t ptr, if (likely(tag_last - prev_page <= TARGET_PAGE_SIZE)) { /* Memory access stays on one page. */ tag_size = ((tag_byte_last - tag_byte_first) / (2 * TAG_GRANULE)) + 1; - mem1 = allocation_tag_mem(env, mmu_idx, ptr, type, total, + mem1 = allocation_tag_mem(env, mmu_idx, ptr, type, sizem1 + 1, MMU_DATA_LOAD, tag_size, ra); if (!mem1) { return 1; @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra) { uint64_t fault; - uint32_t total = FIELD_EX32(desc, MTEDESC, TSIZE); - int ret = mte_probe_int(env, desc, ptr, ra, total, &fault); + int ret = mte_probe_int(env, desc, ptr, ra, &fault); if (unlikely(ret == 0)) { mte_check_fail(env, desc, fault, ra); @@ -XXX,XX +XXX,XX @@ uint64_t mte_check1(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra) { uint64_t fault; - uint32_t total = FIELD_EX32(desc, MTEDESC, ESIZE); - int ret = mte_probe_int(env, desc, ptr, ra, total, &fault); + int ret = mte_probe_int(env, desc, ptr, ra, &fault); if (unlikely(ret == 0)) { mte_check_fail(env, desc, fault, ra); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(mte_check1)(CPUARMState *env, uint32_t desc, uint64_t ptr) bool mte_probe1(CPUARMState *env, uint32_t desc, uint64_t ptr) { uint64_t fault; - uint32_t total = FIELD_EX32(desc, MTEDESC, ESIZE); - int ret = mte_probe_int(env, desc, ptr, 0, total, &fault); + int ret = mte_probe_int(env, desc, ptr, 0, &fault); return ret != 0; } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static TCGv_i64 gen_mte_check1_mmuidx(DisasContext *s, TCGv_i64 addr, desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, ESIZE, 1 << log2_size); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << log2_size) - 1); tcg_desc = tcg_const_i32(desc); ret = new_tmp_a64(s); @@ -XXX,XX +XXX,XX @@ TCGv_i64 gen_mte_checkN(DisasContext *s, TCGv_i64 addr, bool is_write, desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, ESIZE, 1 << log2_esize); - desc = FIELD_DP32(desc, MTEDESC, TSIZE, total_size); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, total_size - 1); tcg_desc = tcg_const_i32(desc); ret = new_tmp_a64(s); diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, ESIZE, 1 << msz); - desc = FIELD_DP32(desc, MTEDESC, TSIZE, mte_n << msz); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (mte_n << msz) - 1); desc <<= SVE_MTEDESC_SHIFT; } else { addr = clean_data_tbi(s, addr); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, ESIZE, 1 << msz); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << msz) - 1); desc <<= SVE_MTEDESC_SHIFT; } desc = simd_desc(vsz, vsz, desc | scale); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The mte_check1 and mte_checkN functions are now identical. Drop mte_check1 and rename mte_checkN to mte_check. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 3 +-- target/arm/internals.h | 5 +---- target/arm/mte_helper.c | 26 +++----------------------- target/arm/sve_helper.c | 14 +++++++------- target/arm/translate-a64.c | 4 ++-- 5 files changed, 14 insertions(+), 38 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(autdb, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_2(xpaci, TCG_CALL_NO_RWG_SE, i64, env, i64) DEF_HELPER_FLAGS_2(xpacd, TCG_CALL_NO_RWG_SE, i64, env, i64) -DEF_HELPER_FLAGS_3(mte_check1, TCG_CALL_NO_WG, i64, env, i32, i64) -DEF_HELPER_FLAGS_3(mte_checkN, TCG_CALL_NO_WG, i64, env, i32, i64) +DEF_HELPER_FLAGS_3(mte_check, TCG_CALL_NO_WG, i64, env, i32, i64) DEF_HELPER_FLAGS_3(mte_check_zva, TCG_CALL_NO_WG, i64, env, i32, i64) DEF_HELPER_FLAGS_3(irg, TCG_CALL_NO_RWG, i64, env, i64, i64) DEF_HELPER_FLAGS_4(addsubg, TCG_CALL_NO_RWG_SE, i64, env, i64, s32, i32) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, WRITE, 8, 1) FIELD(MTEDESC, SIZEM1, 9, SIMD_DATA_BITS - 9) /* size - 1 */ bool mte_probe1(CPUARMState *env, uint32_t desc, uint64_t ptr); -uint64_t mte_check1(CPUARMState *env, uint32_t desc, - uint64_t ptr, uintptr_t ra); -uint64_t mte_checkN(CPUARMState *env, uint32_t desc, - uint64_t ptr, uintptr_t ra); +uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra); static inline int allocation_tag_from_addr(uint64_t ptr) { diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static int mte_probe_int(CPUARMState *env, uint32_t desc, uint64_t ptr, return 0; } -uint64_t mte_checkN(CPUARMState *env, uint32_t desc, - uint64_t ptr, uintptr_t ra) +uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra) { uint64_t fault; int ret = mte_probe_int(env, desc, ptr, ra, &fault); @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, return useronly_clean_ptr(ptr); } -uint64_t HELPER(mte_checkN)(CPUARMState *env, uint32_t desc, uint64_t ptr) +uint64_t HELPER(mte_check)(CPUARMState *env, uint32_t desc, uint64_t ptr) { - return mte_checkN(env, desc, ptr, GETPC()); -} - -uint64_t mte_check1(CPUARMState *env, uint32_t desc, - uint64_t ptr, uintptr_t ra) -{ - uint64_t fault; - int ret = mte_probe_int(env, desc, ptr, ra, &fault); - - if (unlikely(ret == 0)) { - mte_check_fail(env, desc, fault, ra); - } else if (ret < 0) { - return ptr; - } - return useronly_clean_ptr(ptr); -} - -uint64_t HELPER(mte_check1)(CPUARMState *env, uint32_t desc, uint64_t ptr) -{ - return mte_check1(env, desc, ptr, GETPC()); + return mte_check(env, desc, ptr, GETPC()); } /* diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static void sve_cont_ldst_mte_check1(SVEContLdSt *info, CPUARMState *env, uintptr_t ra) { sve_cont_ldst_mte_check_int(info, env, vg, addr, esize, msize, - mtedesc, ra, mte_check1); + mtedesc, ra, mte_check); } static void sve_cont_ldst_mte_checkN(SVEContLdSt *info, CPUARMState *env, @@ -XXX,XX +XXX,XX @@ static void sve_cont_ldst_mte_checkN(SVEContLdSt *info, CPUARMState *env, uintptr_t ra) { sve_cont_ldst_mte_check_int(info, env, vg, addr, esize, msize, - mtedesc, ra, mte_checkN); + mtedesc, ra, mte_check); } @@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r(CPUARMState *env, void *vg, const target_ulong addr, if (fault == FAULT_FIRST) { /* Trapping mte check for the first-fault element. */ if (mtedesc) { - mte_check1(env, mtedesc, addr + mem_off, retaddr); + mte_check(env, mtedesc, addr + mem_off, retaddr); } /* @@ -XXX,XX +XXX,XX @@ void sve_ld1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm, info.attrs, BP_MEM_READ, retaddr); } if (mtedesc && arm_tlb_mte_tagged(&info.attrs)) { - mte_check1(env, mtedesc, addr, retaddr); + mte_check(env, mtedesc, addr, retaddr); } host_fn(&scratch, reg_off, info.host); } else { @@ -XXX,XX +XXX,XX @@ void sve_ld1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm, BP_MEM_READ, retaddr); } if (mtedesc && arm_tlb_mte_tagged(&info.attrs)) { - mte_check1(env, mtedesc, addr, retaddr); + mte_check(env, mtedesc, addr, retaddr); } tlb_fn(env, &scratch, reg_off, addr, retaddr); } @@ -XXX,XX +XXX,XX @@ void sve_ldff1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm, */ addr = base + (off_fn(vm, reg_off) << scale); if (mtedesc) { - mte_check1(env, mtedesc, addr, retaddr); + mte_check(env, mtedesc, addr, retaddr); } tlb_fn(env, vd, reg_off, addr, retaddr); @@ -XXX,XX +XXX,XX @@ void sve_st1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm, } if (mtedesc && arm_tlb_mte_tagged(&info.attrs)) { - mte_check1(env, mtedesc, addr, retaddr); + mte_check(env, mtedesc, addr, retaddr); } } i += 1; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static TCGv_i64 gen_mte_check1_mmuidx(DisasContext *s, TCGv_i64 addr, tcg_desc = tcg_const_i32(desc); ret = new_tmp_a64(s); - gen_helper_mte_check1(ret, cpu_env, tcg_desc, addr); + gen_helper_mte_check(ret, cpu_env, tcg_desc, addr); tcg_temp_free_i32(tcg_desc); return ret; @@ -XXX,XX +XXX,XX @@ TCGv_i64 gen_mte_checkN(DisasContext *s, TCGv_i64 addr, bool is_write, tcg_desc = tcg_const_i32(desc); ret = new_tmp_a64(s); - gen_helper_mte_checkN(ret, cpu_env, tcg_desc, addr); + gen_helper_mte_check(ret, cpu_env, tcg_desc, addr); tcg_temp_free_i32(tcg_desc); return ret; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> For consistency with the mte_check1 + mte_checkN merge to mte_check, rename the probe function as well. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 +- target/arm/mte_helper.c | 6 +++--- target/arm/sve_helper.c | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, TCMA, 6, 2) FIELD(MTEDESC, WRITE, 8, 1) FIELD(MTEDESC, SIZEM1, 9, SIMD_DATA_BITS - 9) /* size - 1 */ -bool mte_probe1(CPUARMState *env, uint32_t desc, uint64_t ptr); +bool mte_probe(CPUARMState *env, uint32_t desc, uint64_t ptr); uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra); static inline int allocation_tag_from_addr(uint64_t ptr) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static uint8_t *allocation_tag_mem(CPUARMState *env, int ptr_mmu_idx, * exception for inaccessible pages, and resolves the virtual address * into the softmmu tlb. * - * When RA == 0, this is for mte_probe1. The page is expected to be + * When RA == 0, this is for mte_probe. The page is expected to be * valid. Indicate to probe_access_flags no-fault, then assert that * we received a valid page. */ @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(mte_check)(CPUARMState *env, uint32_t desc, uint64_t ptr) } /* - * No-fault version of mte_check1, to be used by SVE for MemSingleNF. + * No-fault version of mte_check, to be used by SVE for MemSingleNF. * Returns false if the access is Checked and the check failed. This * is only intended to probe the tag -- the validity of the page must * be checked beforehand. */ -bool mte_probe1(CPUARMState *env, uint32_t desc, uint64_t ptr) +bool mte_probe(CPUARMState *env, uint32_t desc, uint64_t ptr) { uint64_t fault; int ret = mte_probe_int(env, desc, ptr, 0, &fault); diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r(CPUARMState *env, void *vg, const target_ulong addr, /* Watchpoint hit, see below. */ goto do_fault; } - if (mtedesc && !mte_probe1(env, mtedesc, addr + mem_off)) { + if (mtedesc && !mte_probe(env, mtedesc, addr + mem_off)) { goto do_fault; } /* @@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r(CPUARMState *env, void *vg, const target_ulong addr, & BP_MEM_READ)) { goto do_fault; } - if (mtedesc && !mte_probe1(env, mtedesc, addr + mem_off)) { + if (mtedesc && !mte_probe(env, mtedesc, addr + mem_off)) { goto do_fault; } host_fn(vd, reg_off, host + mem_off); @@ -XXX,XX +XXX,XX @@ void sve_ldff1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm, } if (mtedesc && arm_tlb_mte_tagged(&info.attrs) && - !mte_probe1(env, mtedesc, addr)) { + !mte_probe(env, mtedesc, addr)) { goto fault; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Now that mte_check1 and mte_checkN have been merged, we can merge sve_cont_ldst_mte_check1 and sve_cont_ldst_mte_checkN. Which means that we can eliminate the function pointer into sve_ldN_r and sve_stN_r, calling sve_cont_ldst_mte_check directly. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 84 +++++++++++++---------------------------- 1 file changed, 26 insertions(+), 58 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static void sve_cont_ldst_watchpoints(SVEContLdSt *info, CPUARMState *env, #endif } -typedef uint64_t mte_check_fn(CPUARMState *, uint32_t, uint64_t, uintptr_t); - -static inline QEMU_ALWAYS_INLINE -void sve_cont_ldst_mte_check_int(SVEContLdSt *info, CPUARMState *env, - uint64_t *vg, target_ulong addr, int esize, - int msize, uint32_t mtedesc, uintptr_t ra, - mte_check_fn *check) +static void sve_cont_ldst_mte_check(SVEContLdSt *info, CPUARMState *env, + uint64_t *vg, target_ulong addr, int esize, + int msize, uint32_t mtedesc, uintptr_t ra) { intptr_t mem_off, reg_off, reg_last; @@ -XXX,XX +XXX,XX @@ void sve_cont_ldst_mte_check_int(SVEContLdSt *info, CPUARMState *env, uint64_t pg = vg[reg_off >> 6]; do { if ((pg >> (reg_off & 63)) & 1) { - check(env, mtedesc, addr, ra); + mte_check(env, mtedesc, addr, ra); } reg_off += esize; mem_off += msize; @@ -XXX,XX +XXX,XX @@ void sve_cont_ldst_mte_check_int(SVEContLdSt *info, CPUARMState *env, uint64_t pg = vg[reg_off >> 6]; do { if ((pg >> (reg_off & 63)) & 1) { - check(env, mtedesc, addr, ra); + mte_check(env, mtedesc, addr, ra); } reg_off += esize; mem_off += msize; @@ -XXX,XX +XXX,XX @@ void sve_cont_ldst_mte_check_int(SVEContLdSt *info, CPUARMState *env, } } -typedef void sve_cont_ldst_mte_check_fn(SVEContLdSt *info, CPUARMState *env, - uint64_t *vg, target_ulong addr, - int esize, int msize, uint32_t mtedesc, - uintptr_t ra); - -static void sve_cont_ldst_mte_check1(SVEContLdSt *info, CPUARMState *env, - uint64_t *vg, target_ulong addr, - int esize, int msize, uint32_t mtedesc, - uintptr_t ra) -{ - sve_cont_ldst_mte_check_int(info, env, vg, addr, esize, msize, - mtedesc, ra, mte_check); -} - -static void sve_cont_ldst_mte_checkN(SVEContLdSt *info, CPUARMState *env, - uint64_t *vg, target_ulong addr, - int esize, int msize, uint32_t mtedesc, - uintptr_t ra) -{ - sve_cont_ldst_mte_check_int(info, env, vg, addr, esize, msize, - mtedesc, ra, mte_check); -} - - /* * Common helper for all contiguous 1,2,3,4-register predicated stores. */ @@ -XXX,XX +XXX,XX @@ void sve_ldN_r(CPUARMState *env, uint64_t *vg, const target_ulong addr, uint32_t desc, const uintptr_t retaddr, const int esz, const int msz, const int N, uint32_t mtedesc, sve_ldst1_host_fn *host_fn, - sve_ldst1_tlb_fn *tlb_fn, - sve_cont_ldst_mte_check_fn *mte_check_fn) + sve_ldst1_tlb_fn *tlb_fn) { const unsigned rd = simd_data(desc); const intptr_t reg_max = simd_oprsz(desc); @@ -XXX,XX +XXX,XX @@ void sve_ldN_r(CPUARMState *env, uint64_t *vg, const target_ulong addr, * Handle mte checks for all active elements. * Since TBI must be set for MTE, !mtedesc => !mte_active. */ - if (mte_check_fn && mtedesc) { - mte_check_fn(&info, env, vg, addr, 1 << esz, N << msz, - mtedesc, retaddr); + if (mtedesc) { + sve_cont_ldst_mte_check(&info, env, vg, addr, 1 << esz, N << msz, + mtedesc, retaddr); } flags = info.page[0].flags | info.page[1].flags; @@ -XXX,XX +XXX,XX @@ void sve_ldN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, mtedesc = 0; } - sve_ldN_r(env, vg, addr, desc, ra, esz, msz, N, mtedesc, host_fn, tlb_fn, - N == 1 ? sve_cont_ldst_mte_check1 : sve_cont_ldst_mte_checkN); + sve_ldN_r(env, vg, addr, desc, ra, esz, msz, N, mtedesc, host_fn, tlb_fn); } #define DO_LD1_1(NAME, ESZ) \ @@ -XXX,XX +XXX,XX @@ void HELPER(sve_##NAME##_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_ldN_r(env, vg, addr, desc, GETPC(), ESZ, MO_8, 1, 0, \ - sve_##NAME##_host, sve_##NAME##_tlb, NULL); \ + sve_##NAME##_host, sve_##NAME##_tlb); \ } \ void HELPER(sve_##NAME##_r_mte)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ @@ -XXX,XX +XXX,XX @@ void HELPER(sve_##NAME##_le_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_ldN_r(env, vg, addr, desc, GETPC(), ESZ, MSZ, 1, 0, \ - sve_##NAME##_le_host, sve_##NAME##_le_tlb, NULL); \ + sve_##NAME##_le_host, sve_##NAME##_le_tlb); \ } \ void HELPER(sve_##NAME##_be_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_ldN_r(env, vg, addr, desc, GETPC(), ESZ, MSZ, 1, 0, \ - sve_##NAME##_be_host, sve_##NAME##_be_tlb, NULL); \ + sve_##NAME##_be_host, sve_##NAME##_be_tlb); \ } \ void HELPER(sve_##NAME##_le_r_mte)(CPUARMState *env, void *vg, \ - target_ulong addr, uint32_t desc) \ + target_ulong addr, uint32_t desc) \ { \ sve_ldN_r_mte(env, vg, addr, desc, GETPC(), ESZ, MSZ, 1, \ sve_##NAME##_le_host, sve_##NAME##_le_tlb); \ } \ void HELPER(sve_##NAME##_be_r_mte)(CPUARMState *env, void *vg, \ - target_ulong addr, uint32_t desc) \ + target_ulong addr, uint32_t desc) \ { \ sve_ldN_r_mte(env, vg, addr, desc, GETPC(), ESZ, MSZ, 1, \ sve_##NAME##_be_host, sve_##NAME##_be_tlb); \ @@ -XXX,XX +XXX,XX @@ void HELPER(sve_ld##N##bb_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_ldN_r(env, vg, addr, desc, GETPC(), MO_8, MO_8, N, 0, \ - sve_ld1bb_host, sve_ld1bb_tlb, NULL); \ + sve_ld1bb_host, sve_ld1bb_tlb); \ } \ void HELPER(sve_ld##N##bb_r_mte)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ @@ -XXX,XX +XXX,XX @@ void HELPER(sve_ld##N##SUFF##_le_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_ldN_r(env, vg, addr, desc, GETPC(), ESZ, ESZ, N, 0, \ - sve_ld1##SUFF##_le_host, sve_ld1##SUFF##_le_tlb, NULL); \ + sve_ld1##SUFF##_le_host, sve_ld1##SUFF##_le_tlb); \ } \ void HELPER(sve_ld##N##SUFF##_be_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_ldN_r(env, vg, addr, desc, GETPC(), ESZ, ESZ, N, 0, \ - sve_ld1##SUFF##_be_host, sve_ld1##SUFF##_be_tlb, NULL); \ + sve_ld1##SUFF##_be_host, sve_ld1##SUFF##_be_tlb); \ } \ void HELPER(sve_ld##N##SUFF##_le_r_mte)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ @@ -XXX,XX +XXX,XX @@ void sve_stN_r(CPUARMState *env, uint64_t *vg, target_ulong addr, uint32_t desc, const uintptr_t retaddr, const int esz, const int msz, const int N, uint32_t mtedesc, sve_ldst1_host_fn *host_fn, - sve_ldst1_tlb_fn *tlb_fn, - sve_cont_ldst_mte_check_fn *mte_check_fn) + sve_ldst1_tlb_fn *tlb_fn) { const unsigned rd = simd_data(desc); const intptr_t reg_max = simd_oprsz(desc); @@ -XXX,XX +XXX,XX @@ void sve_stN_r(CPUARMState *env, uint64_t *vg, target_ulong addr, * Handle mte checks for all active elements. * Since TBI must be set for MTE, !mtedesc => !mte_active. */ - if (mte_check_fn && mtedesc) { - mte_check_fn(&info, env, vg, addr, 1 << esz, N << msz, - mtedesc, retaddr); + if (mtedesc) { + sve_cont_ldst_mte_check(&info, env, vg, addr, 1 << esz, N << msz, + mtedesc, retaddr); } flags = info.page[0].flags | info.page[1].flags; @@ -XXX,XX +XXX,XX @@ void sve_stN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, mtedesc = 0; } - sve_stN_r(env, vg, addr, desc, ra, esz, msz, N, mtedesc, host_fn, tlb_fn, - N == 1 ? sve_cont_ldst_mte_check1 : sve_cont_ldst_mte_checkN); + sve_stN_r(env, vg, addr, desc, ra, esz, msz, N, mtedesc, host_fn, tlb_fn); } #define DO_STN_1(N, NAME, ESZ) \ @@ -XXX,XX +XXX,XX @@ void HELPER(sve_st##N##NAME##_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_stN_r(env, vg, addr, desc, GETPC(), ESZ, MO_8, N, 0, \ - sve_st1##NAME##_host, sve_st1##NAME##_tlb, NULL); \ + sve_st1##NAME##_host, sve_st1##NAME##_tlb); \ } \ void HELPER(sve_st##N##NAME##_r_mte)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ @@ -XXX,XX +XXX,XX @@ void HELPER(sve_st##N##NAME##_le_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_stN_r(env, vg, addr, desc, GETPC(), ESZ, MSZ, N, 0, \ - sve_st1##NAME##_le_host, sve_st1##NAME##_le_tlb, NULL); \ + sve_st1##NAME##_le_host, sve_st1##NAME##_le_tlb); \ } \ void HELPER(sve_st##N##NAME##_be_r)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ { \ sve_stN_r(env, vg, addr, desc, GETPC(), ESZ, MSZ, N, 0, \ - sve_st1##NAME##_be_host, sve_st1##NAME##_be_tlb, NULL); \ + sve_st1##NAME##_be_host, sve_st1##NAME##_be_tlb); \ } \ void HELPER(sve_st##N##NAME##_le_r_mte)(CPUARMState *env, void *vg, \ target_ulong addr, uint32_t desc) \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The log2_esize parameter is not used except trivially. Drop the parameter and the deferral to gen_mte_check1. This fixes a bug in that the parameters as documented in the header file were the reverse from those in the implementation. Which meant that translate-sve.c was passing the parameters in the wrong order. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 2 +- target/arm/translate-a64.c | 15 +++++++-------- target/arm/translate-sve.c | 4 ++-- 3 files changed, 10 insertions(+), 11 deletions(-) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ TCGv_i64 clean_data_tbi(DisasContext *s, TCGv_i64 addr); TCGv_i64 gen_mte_check1(DisasContext *s, TCGv_i64 addr, bool is_write, bool tag_checked, int log2_size); TCGv_i64 gen_mte_checkN(DisasContext *s, TCGv_i64 addr, bool is_write, - bool tag_checked, int count, int log2_esize); + bool tag_checked, int size); /* We should have at some point before trying to access an FP register * done the necessary access check, so assert that diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ TCGv_i64 gen_mte_check1(DisasContext *s, TCGv_i64 addr, bool is_write, * For MTE, check multiple logical sequential accesses. */ TCGv_i64 gen_mte_checkN(DisasContext *s, TCGv_i64 addr, bool is_write, - bool tag_checked, int log2_esize, int total_size) + bool tag_checked, int size) { - if (tag_checked && s->mte_active[0] && total_size != (1 << log2_esize)) { + if (tag_checked && s->mte_active[0]) { TCGv_i32 tcg_desc; TCGv_i64 ret; int desc = 0; @@ -XXX,XX +XXX,XX @@ TCGv_i64 gen_mte_checkN(DisasContext *s, TCGv_i64 addr, bool is_write, desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, total_size - 1); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, size - 1); tcg_desc = tcg_const_i32(desc); ret = new_tmp_a64(s); @@ -XXX,XX +XXX,XX @@ TCGv_i64 gen_mte_checkN(DisasContext *s, TCGv_i64 addr, bool is_write, return ret; } - return gen_mte_check1(s, addr, is_write, tag_checked, log2_esize); + return clean_data_tbi(s, addr); } typedef struct DisasCompare64 { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_pair(DisasContext *s, uint32_t insn) } clean_addr = gen_mte_checkN(s, dirty_addr, !is_load, - (wback || rn != 31) && !set_tag, - size, 2 << size); + (wback || rn != 31) && !set_tag, 2 << size); if (is_vector) { if (is_load) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) * promote consecutive little-endian elements below. */ clean_addr = gen_mte_checkN(s, tcg_rn, is_store, is_postidx || rn != 31, - size, total); + total); /* * Consecutive little-endian elements from a single register @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) tcg_rn = cpu_reg_sp(s, rn); clean_addr = gen_mte_checkN(s, tcg_rn, !is_load, is_postidx || rn != 31, - scale, total); + total); tcg_ebytes = tcg_const_i64(1 << scale); for (xs = 0; xs < selem; xs++) { diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) dirty_addr = tcg_temp_new_i64(); tcg_gen_addi_i64(dirty_addr, cpu_reg_sp(s, rn), imm); - clean_addr = gen_mte_checkN(s, dirty_addr, false, rn != 31, len, MO_8); + clean_addr = gen_mte_checkN(s, dirty_addr, false, rn != 31, len); tcg_temp_free_i64(dirty_addr); /* @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) dirty_addr = tcg_temp_new_i64(); tcg_gen_addi_i64(dirty_addr, cpu_reg_sp(s, rn), imm); - clean_addr = gen_mte_checkN(s, dirty_addr, false, rn != 31, len, MO_8); + clean_addr = gen_mte_checkN(s, dirty_addr, false, rn != 31, len); tcg_temp_free_i64(dirty_addr); /* Note that unpredicated load/store of vector/predicate registers -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The encoding of size = 2 and size = 3 had the incorrect decode for align, overlapping the stride field. This error was hidden by what should have been unnecessary masking in translate. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/neon-ls.decode | 4 ++-- target/arm/translate-neon.c.inc | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/target/arm/neon-ls.decode b/target/arm/neon-ls.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-ls.decode +++ b/target/arm/neon-ls.decode @@ -XXX,XX +XXX,XX @@ VLD_all_lanes 1111 0100 1 . 1 0 rn:4 .... 11 n:2 size:2 t:1 a:1 rm:4 \ VLDST_single 1111 0100 1 . l:1 0 rn:4 .... 00 n:2 reg_idx:3 align:1 rm:4 \ vd=%vd_dp size=0 stride=1 -VLDST_single 1111 0100 1 . l:1 0 rn:4 .... 01 n:2 reg_idx:2 align:2 rm:4 \ +VLDST_single 1111 0100 1 . l:1 0 rn:4 .... 01 n:2 reg_idx:2 . align:1 rm:4 \ vd=%vd_dp size=1 stride=%imm1_5_p1 -VLDST_single 1111 0100 1 . l:1 0 rn:4 .... 10 n:2 reg_idx:1 align:3 rm:4 \ +VLDST_single 1111 0100 1 . l:1 0 rn:4 .... 10 n:2 reg_idx:1 . align:2 rm:4 \ vd=%vd_dp size=2 stride=%imm1_6_p1 diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_single(DisasContext *s, arg_VLDST_single *a) switch (nregs) { case 1: if (((a->align & (1 << a->size)) != 0) || - (a->size == 2 && ((a->align & 3) == 1 || (a->align & 3) == 2))) { + (a->size == 2 && (a->align == 1 || a->align == 2))) { return false; } break; @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_single(DisasContext *s, arg_VLDST_single *a) } break; case 4: - if ((a->size == 2) && ((a->align & 3) == 3)) { + if (a->size == 2 && a->align == 3) { return false; } break; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We're about to rearrange the macro expansion surrounding tbflags, and this field name will be expanded using the bit definition of the same name, resulting in a token pasting error. So SCTLR_B -> SCTLR__B in the 3 uses, and document it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- target/arm/helper.c | 2 +- target/arm/translate.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, VECSTRIDE, 12, 2) /* Not cached. */ */ FIELD(TBFLAG_A32, XSCALE_CPAR, 12, 2) FIELD(TBFLAG_A32, VFPEN, 14, 1) /* Partially cached, minus FPEXC. */ -FIELD(TBFLAG_A32, SCTLR_B, 15, 1) +FIELD(TBFLAG_A32, SCTLR__B, 15, 1) /* Cannot overlap with SCTLR_B */ FIELD(TBFLAG_A32, HSTR_ACTIVE, 16, 1) /* * Indicates whether cp register reads and writes by guest code should access diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, bool sctlr_b = arm_sctlr_b(env); if (sctlr_b) { - flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, 1); + flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR__B, 1); } if (arm_cpu_data_is_big_endian_a32(env, sctlr_b)) { flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) FIELD_EX32(tb_flags, TBFLAG_ANY, BE_DATA) ? MO_BE : MO_LE; dc->debug_target_el = FIELD_EX32(tb_flags, TBFLAG_ANY, DEBUG_TARGET_EL); - dc->sctlr_b = FIELD_EX32(tb_flags, TBFLAG_A32, SCTLR_B); + dc->sctlr_b = FIELD_EX32(tb_flags, TBFLAG_A32, SCTLR__B); dc->hstr_active = FIELD_EX32(tb_flags, TBFLAG_A32, HSTR_ACTIVE); dc->ns = FIELD_EX32(tb_flags, TBFLAG_A32, NS); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We're about to rearrange the macro expansion surrounding tbflags, and this field name will be expanded using the bit definition of the same name, resulting in a token pasting error. So PSTATE_SS -> PSTATE__SS in the uses, and document it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- target/arm/helper.c | 4 ++-- target/arm/translate-a64.c | 2 +- target/arm/translate.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef ARMCPU ArchCPU; */ FIELD(TBFLAG_ANY, AARCH64_STATE, 31, 1) FIELD(TBFLAG_ANY, SS_ACTIVE, 30, 1) -FIELD(TBFLAG_ANY, PSTATE_SS, 29, 1) /* Not cached. */ +FIELD(TBFLAG_ANY, PSTATE__SS, 29, 1) /* Not cached. */ FIELD(TBFLAG_ANY, BE_DATA, 28, 1) FIELD(TBFLAG_ANY, MMUIDX, 24, 4) /* Target EL if we take a floating-point-disabled exception */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, * 0 x Inactive (the TB flag for SS is always 0) * 1 0 Active-pending * 1 1 Active-not-pending - * SS_ACTIVE is set in hflags; PSTATE_SS is computed every TB. + * SS_ACTIVE is set in hflags; PSTATE__SS is computed every TB. */ if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE) && (env->pstate & PSTATE_SS)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); + flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE__SS, 1); } *pflags = flags; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, * end the TB */ dc->ss_active = FIELD_EX32(tb_flags, TBFLAG_ANY, SS_ACTIVE); - dc->pstate_ss = FIELD_EX32(tb_flags, TBFLAG_ANY, PSTATE_SS); + dc->pstate_ss = FIELD_EX32(tb_flags, TBFLAG_ANY, PSTATE__SS); dc->is_ldex = false; dc->debug_target_el = FIELD_EX32(tb_flags, TBFLAG_ANY, DEBUG_TARGET_EL); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) * end the TB */ dc->ss_active = FIELD_EX32(tb_flags, TBFLAG_ANY, SS_ACTIVE); - dc->pstate_ss = FIELD_EX32(tb_flags, TBFLAG_ANY, PSTATE_SS); + dc->pstate_ss = FIELD_EX32(tb_flags, TBFLAG_ANY, PSTATE__SS); dc->is_ldex = false; dc->page_start = dc->base.pc_first & TARGET_PAGE_MASK; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We're about to split tbflags into two parts. These macros will ensure that the correct part is used with the correct set of bits. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 22 +++++++++- target/arm/helper-a64.c | 2 +- target/arm/helper.c | 85 +++++++++++++++++--------------------- target/arm/translate-a64.c | 36 ++++++++-------- target/arm/translate.c | 48 ++++++++++----------- 5 files changed, 101 insertions(+), 92 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, TCMA, 16, 2) FIELD(TBFLAG_A64, MTE_ACTIVE, 18, 1) FIELD(TBFLAG_A64, MTE0_ACTIVE, 19, 1) +/* + * Helpers for using the above. + */ +#define DP_TBFLAG_ANY(DST, WHICH, VAL) \ + (DST = FIELD_DP32(DST, TBFLAG_ANY, WHICH, VAL)) +#define DP_TBFLAG_A64(DST, WHICH, VAL) \ + (DST = FIELD_DP32(DST, TBFLAG_A64, WHICH, VAL)) +#define DP_TBFLAG_A32(DST, WHICH, VAL) \ + (DST = FIELD_DP32(DST, TBFLAG_A32, WHICH, VAL)) +#define DP_TBFLAG_M32(DST, WHICH, VAL) \ + (DST = FIELD_DP32(DST, TBFLAG_M32, WHICH, VAL)) +#define DP_TBFLAG_AM32(DST, WHICH, VAL) \ + (DST = FIELD_DP32(DST, TBFLAG_AM32, WHICH, VAL)) + +#define EX_TBFLAG_ANY(IN, WHICH) FIELD_EX32(IN, TBFLAG_ANY, WHICH) +#define EX_TBFLAG_A64(IN, WHICH) FIELD_EX32(IN, TBFLAG_A64, WHICH) +#define EX_TBFLAG_A32(IN, WHICH) FIELD_EX32(IN, TBFLAG_A32, WHICH) +#define EX_TBFLAG_M32(IN, WHICH) FIELD_EX32(IN, TBFLAG_M32, WHICH) +#define EX_TBFLAG_AM32(IN, WHICH) FIELD_EX32(IN, TBFLAG_AM32, WHICH) + /** * cpu_mmu_index: * @env: The cpu environment @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, MTE0_ACTIVE, 19, 1) */ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) { - return FIELD_EX32(env->hflags, TBFLAG_ANY, MMUIDX); + return EX_TBFLAG_ANY(env->hflags, MMUIDX); } static inline bool bswap_code(bool sctlr_b) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) * the hflags rebuild, since we can pull the composite TBII field * from there. */ - tbii = FIELD_EX32(env->hflags, TBFLAG_A64, TBII); + tbii = EX_TBFLAG_A64(env->hflags, TBII); if ((tbii >> extract64(new_pc, 55, 1)) & 1) { /* TBI is enabled. */ int core_mmu_idx = cpu_mmu_index(env, false); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx, uint32_t flags) { - flags = FIELD_DP32(flags, TBFLAG_ANY, FPEXC_EL, fp_el); - flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, - arm_to_core_mmu_idx(mmu_idx)); + DP_TBFLAG_ANY(flags, FPEXC_EL, fp_el); + DP_TBFLAG_ANY(flags, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); if (arm_singlestep_active(env)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1); + DP_TBFLAG_ANY(flags, SS_ACTIVE, 1); } return flags; } @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, bool sctlr_b = arm_sctlr_b(env); if (sctlr_b) { - flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR__B, 1); + DP_TBFLAG_A32(flags, SCTLR__B, 1); } if (arm_cpu_data_is_big_endian_a32(env, sctlr_b)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); + DP_TBFLAG_ANY(flags, BE_DATA, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); + DP_TBFLAG_A32(flags, NS, !access_secure_reg(env)); return rebuild_hflags_common(env, fp_el, mmu_idx, flags); } @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, uint32_t flags = 0; if (arm_v7m_is_handler_mode(env)) { - flags = FIELD_DP32(flags, TBFLAG_M32, HANDLER, 1); + DP_TBFLAG_M32(flags, HANDLER, 1); } /* @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, if (arm_feature(env, ARM_FEATURE_V8) && !((mmu_idx & ARM_MMU_IDX_M_NEGPRI) && (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKOFHFNMIGN_MASK))) { - flags = FIELD_DP32(flags, TBFLAG_M32, STACKCHECK, 1); + DP_TBFLAG_M32(flags, STACKCHECK, 1); } return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_aprofile(CPUARMState *env) { int flags = 0; - flags = FIELD_DP32(flags, TBFLAG_ANY, DEBUG_TARGET_EL, - arm_debug_target_el(env)); + DP_TBFLAG_ANY(flags, DEBUG_TARGET_EL, arm_debug_target_el(env)); return flags; } @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, uint32_t flags = rebuild_hflags_aprofile(env); if (arm_el_is_aa64(env, 1)) { - flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); + DP_TBFLAG_A32(flags, VFPEN, 1); } if (arm_current_el(env) < 2 && env->cp15.hstr_el2 && (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { - flags = FIELD_DP32(flags, TBFLAG_A32, HSTR_ACTIVE, 1); + DP_TBFLAG_A32(flags, HSTR_ACTIVE, 1); } return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, uint64_t sctlr; int tbii, tbid; - flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1); + DP_TBFLAG_ANY(flags, AARCH64_STATE, 1); /* Get control bits for tagged addresses. */ tbid = aa64_va_parameter_tbi(tcr, mmu_idx); tbii = tbid & ~aa64_va_parameter_tbid(tcr, mmu_idx); - flags = FIELD_DP32(flags, TBFLAG_A64, TBII, tbii); - flags = FIELD_DP32(flags, TBFLAG_A64, TBID, tbid); + DP_TBFLAG_A64(flags, TBII, tbii); + DP_TBFLAG_A64(flags, TBID, tbid); if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { int sve_el = sve_exception_el(env, el); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, } else { zcr_len = sve_zcr_len_for_el(env, el); } - flags = FIELD_DP32(flags, TBFLAG_A64, SVEEXC_EL, sve_el); - flags = FIELD_DP32(flags, TBFLAG_A64, ZCR_LEN, zcr_len); + DP_TBFLAG_A64(flags, SVEEXC_EL, sve_el); + DP_TBFLAG_A64(flags, ZCR_LEN, zcr_len); } sctlr = regime_sctlr(env, stage1); if (arm_cpu_data_is_big_endian_a64(el, sctlr)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); + DP_TBFLAG_ANY(flags, BE_DATA, 1); } if (cpu_isar_feature(aa64_pauth, env_archcpu(env))) { @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, * The decision of which action to take is left to a helper. */ if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) { - flags = FIELD_DP32(flags, TBFLAG_A64, PAUTH_ACTIVE, 1); + DP_TBFLAG_A64(flags, PAUTH_ACTIVE, 1); } } if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { /* Note that SCTLR_EL[23].BT == SCTLR_BT1. */ if (sctlr & (el == 0 ? SCTLR_BT0 : SCTLR_BT1)) { - flags = FIELD_DP32(flags, TBFLAG_A64, BT, 1); + DP_TBFLAG_A64(flags, BT, 1); } } @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, case ARMMMUIdx_SE10_1: case ARMMMUIdx_SE10_1_PAN: /* TODO: ARMv8.3-NV */ - flags = FIELD_DP32(flags, TBFLAG_A64, UNPRIV, 1); + DP_TBFLAG_A64(flags, UNPRIV, 1); break; case ARMMMUIdx_E20_2: case ARMMMUIdx_E20_2_PAN: @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, * gated by HCR_EL2.<E2H,TGE> == '11', and so is LDTR. */ if (env->cp15.hcr_el2 & HCR_TGE) { - flags = FIELD_DP32(flags, TBFLAG_A64, UNPRIV, 1); + DP_TBFLAG_A64(flags, UNPRIV, 1); } break; default: @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, * 4) If no Allocation Tag Access, then all accesses are Unchecked. */ if (allocation_tag_access_enabled(env, el, sctlr)) { - flags = FIELD_DP32(flags, TBFLAG_A64, ATA, 1); + DP_TBFLAG_A64(flags, ATA, 1); if (tbid && !(env->pstate & PSTATE_TCO) && (sctlr & (el == 0 ? SCTLR_TCF0 : SCTLR_TCF))) { - flags = FIELD_DP32(flags, TBFLAG_A64, MTE_ACTIVE, 1); + DP_TBFLAG_A64(flags, MTE_ACTIVE, 1); } } /* And again for unprivileged accesses, if required. */ - if (FIELD_EX32(flags, TBFLAG_A64, UNPRIV) + if (EX_TBFLAG_A64(flags, UNPRIV) && tbid && !(env->pstate & PSTATE_TCO) && (sctlr & SCTLR_TCF0) && allocation_tag_access_enabled(env, 0, sctlr)) { - flags = FIELD_DP32(flags, TBFLAG_A64, MTE0_ACTIVE, 1); + DP_TBFLAG_A64(flags, MTE0_ACTIVE, 1); } /* Cache TCMA as well as TBI. */ - flags = FIELD_DP32(flags, TBFLAG_A64, TCMA, - aa64_va_parameter_tcma(tcr, mmu_idx)); + DP_TBFLAG_A64(flags, TCMA, aa64_va_parameter_tcma(tcr, mmu_idx)); } return rebuild_hflags_common(env, fp_el, mmu_idx, flags); @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, *cs_base = 0; assert_hflags_rebuild_correctly(env); - if (FIELD_EX32(flags, TBFLAG_ANY, AARCH64_STATE)) { + if (EX_TBFLAG_ANY(flags, AARCH64_STATE)) { *pc = env->pc; if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { - flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); + DP_TBFLAG_A64(flags, BTYPE, env->btype); } } else { *pc = env->regs[15]; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, if (arm_feature(env, ARM_FEATURE_M_SECURITY) && FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { - flags = FIELD_DP32(flags, TBFLAG_M32, FPCCR_S_WRONG, 1); + DP_TBFLAG_M32(flags, FPCCR_S_WRONG, 1); } if ((env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, * active FP context; we must create a new FP context before * executing any FP insn. */ - flags = FIELD_DP32(flags, TBFLAG_M32, NEW_FP_CTXT_NEEDED, 1); + DP_TBFLAG_M32(flags, NEW_FP_CTXT_NEEDED, 1); } bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { - flags = FIELD_DP32(flags, TBFLAG_M32, LSPACT, 1); + DP_TBFLAG_M32(flags, LSPACT, 1); } } else { /* @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, * Note that VECLEN+VECSTRIDE are RES0 for M-profile. */ if (arm_feature(env, ARM_FEATURE_XSCALE)) { - flags = FIELD_DP32(flags, TBFLAG_A32, - XSCALE_CPAR, env->cp15.c15_cpar); + DP_TBFLAG_A32(flags, XSCALE_CPAR, env->cp15.c15_cpar); } else { - flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, - env->vfp.vec_len); - flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, - env->vfp.vec_stride); + DP_TBFLAG_A32(flags, VECLEN, env->vfp.vec_len); + DP_TBFLAG_A32(flags, VECSTRIDE, env->vfp.vec_stride); } if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)) { - flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); + DP_TBFLAG_A32(flags, VFPEN, 1); } } - flags = FIELD_DP32(flags, TBFLAG_AM32, THUMB, env->thumb); - flags = FIELD_DP32(flags, TBFLAG_AM32, CONDEXEC, env->condexec_bits); + DP_TBFLAG_AM32(flags, THUMB, env->thumb); + DP_TBFLAG_AM32(flags, CONDEXEC, env->condexec_bits); } /* @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, * 1 1 Active-not-pending * SS_ACTIVE is set in hflags; PSTATE__SS is computed every TB. */ - if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE) && - (env->pstate & PSTATE_SS)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE__SS, 1); + if (EX_TBFLAG_ANY(flags, SS_ACTIVE) && (env->pstate & PSTATE_SS)) { + DP_TBFLAG_ANY(flags, PSTATE__SS, 1); } *pflags = flags; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, !arm_el_is_aa64(env, 3); dc->thumb = 0; dc->sctlr_b = 0; - dc->be_data = FIELD_EX32(tb_flags, TBFLAG_ANY, BE_DATA) ? MO_BE : MO_LE; + dc->be_data = EX_TBFLAG_ANY(tb_flags, BE_DATA) ? MO_BE : MO_LE; dc->condexec_mask = 0; dc->condexec_cond = 0; - core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX); + core_mmu_idx = EX_TBFLAG_ANY(tb_flags, MMUIDX); dc->mmu_idx = core_to_aa64_mmu_idx(core_mmu_idx); - dc->tbii = FIELD_EX32(tb_flags, TBFLAG_A64, TBII); - dc->tbid = FIELD_EX32(tb_flags, TBFLAG_A64, TBID); - dc->tcma = FIELD_EX32(tb_flags, TBFLAG_A64, TCMA); + dc->tbii = EX_TBFLAG_A64(tb_flags, TBII); + dc->tbid = EX_TBFLAG_A64(tb_flags, TBID); + dc->tcma = EX_TBFLAG_A64(tb_flags, TCMA); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); #if !defined(CONFIG_USER_ONLY) dc->user = (dc->current_el == 0); #endif - dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); - dc->sve_excp_el = FIELD_EX32(tb_flags, TBFLAG_A64, SVEEXC_EL); - dc->sve_len = (FIELD_EX32(tb_flags, TBFLAG_A64, ZCR_LEN) + 1) * 16; - dc->pauth_active = FIELD_EX32(tb_flags, TBFLAG_A64, PAUTH_ACTIVE); - dc->bt = FIELD_EX32(tb_flags, TBFLAG_A64, BT); - dc->btype = FIELD_EX32(tb_flags, TBFLAG_A64, BTYPE); - dc->unpriv = FIELD_EX32(tb_flags, TBFLAG_A64, UNPRIV); - dc->ata = FIELD_EX32(tb_flags, TBFLAG_A64, ATA); - dc->mte_active[0] = FIELD_EX32(tb_flags, TBFLAG_A64, MTE_ACTIVE); - dc->mte_active[1] = FIELD_EX32(tb_flags, TBFLAG_A64, MTE0_ACTIVE); + dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL); + dc->sve_excp_el = EX_TBFLAG_A64(tb_flags, SVEEXC_EL); + dc->sve_len = (EX_TBFLAG_A64(tb_flags, ZCR_LEN) + 1) * 16; + dc->pauth_active = EX_TBFLAG_A64(tb_flags, PAUTH_ACTIVE); + dc->bt = EX_TBFLAG_A64(tb_flags, BT); + dc->btype = EX_TBFLAG_A64(tb_flags, BTYPE); + dc->unpriv = EX_TBFLAG_A64(tb_flags, UNPRIV); + dc->ata = EX_TBFLAG_A64(tb_flags, ATA); + dc->mte_active[0] = EX_TBFLAG_A64(tb_flags, MTE_ACTIVE); + dc->mte_active[1] = EX_TBFLAG_A64(tb_flags, MTE0_ACTIVE); dc->vec_len = 0; dc->vec_stride = 0; dc->cp_regs = arm_cpu->cp_regs; @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, * emit code to generate a software step exception * end the TB */ - dc->ss_active = FIELD_EX32(tb_flags, TBFLAG_ANY, SS_ACTIVE); - dc->pstate_ss = FIELD_EX32(tb_flags, TBFLAG_ANY, PSTATE__SS); + dc->ss_active = EX_TBFLAG_ANY(tb_flags, SS_ACTIVE); + dc->pstate_ss = EX_TBFLAG_ANY(tb_flags, PSTATE__SS); dc->is_ldex = false; - dc->debug_target_el = FIELD_EX32(tb_flags, TBFLAG_ANY, DEBUG_TARGET_EL); + dc->debug_target_el = EX_TBFLAG_ANY(tb_flags, DEBUG_TARGET_EL); /* Bound the number of insns to execute to those left on the page. */ bound = -(dc->base.pc_first | TARGET_PAGE_MASK) / 4; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) */ dc->secure_routed_to_el3 = arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3); - dc->thumb = FIELD_EX32(tb_flags, TBFLAG_AM32, THUMB); - dc->be_data = FIELD_EX32(tb_flags, TBFLAG_ANY, BE_DATA) ? MO_BE : MO_LE; - condexec = FIELD_EX32(tb_flags, TBFLAG_AM32, CONDEXEC); + dc->thumb = EX_TBFLAG_AM32(tb_flags, THUMB); + dc->be_data = EX_TBFLAG_ANY(tb_flags, BE_DATA) ? MO_BE : MO_LE; + condexec = EX_TBFLAG_AM32(tb_flags, CONDEXEC); dc->condexec_mask = (condexec & 0xf) << 1; dc->condexec_cond = condexec >> 4; - core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX); + core_mmu_idx = EX_TBFLAG_ANY(tb_flags, MMUIDX); dc->mmu_idx = core_to_arm_mmu_idx(env, core_mmu_idx); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); #if !defined(CONFIG_USER_ONLY) dc->user = (dc->current_el == 0); #endif - dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); + dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL); if (arm_feature(env, ARM_FEATURE_M)) { dc->vfp_enabled = 1; dc->be_data = MO_TE; - dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_M32, HANDLER); + dc->v7m_handler_mode = EX_TBFLAG_M32(tb_flags, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); - dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_M32, STACKCHECK); - dc->v8m_fpccr_s_wrong = - FIELD_EX32(tb_flags, TBFLAG_M32, FPCCR_S_WRONG); + dc->v8m_stackcheck = EX_TBFLAG_M32(tb_flags, STACKCHECK); + dc->v8m_fpccr_s_wrong = EX_TBFLAG_M32(tb_flags, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = - FIELD_EX32(tb_flags, TBFLAG_M32, NEW_FP_CTXT_NEEDED); - dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_M32, LSPACT); + EX_TBFLAG_M32(tb_flags, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = EX_TBFLAG_M32(tb_flags, LSPACT); } else { - dc->be_data = - FIELD_EX32(tb_flags, TBFLAG_ANY, BE_DATA) ? MO_BE : MO_LE; - dc->debug_target_el = - FIELD_EX32(tb_flags, TBFLAG_ANY, DEBUG_TARGET_EL); - dc->sctlr_b = FIELD_EX32(tb_flags, TBFLAG_A32, SCTLR__B); - dc->hstr_active = FIELD_EX32(tb_flags, TBFLAG_A32, HSTR_ACTIVE); - dc->ns = FIELD_EX32(tb_flags, TBFLAG_A32, NS); - dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); + dc->debug_target_el = EX_TBFLAG_ANY(tb_flags, DEBUG_TARGET_EL); + dc->sctlr_b = EX_TBFLAG_A32(tb_flags, SCTLR__B); + dc->hstr_active = EX_TBFLAG_A32(tb_flags, HSTR_ACTIVE); + dc->ns = EX_TBFLAG_A32(tb_flags, NS); + dc->vfp_enabled = EX_TBFLAG_A32(tb_flags, VFPEN); if (arm_feature(env, ARM_FEATURE_XSCALE)) { - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->c15_cpar = EX_TBFLAG_A32(tb_flags, XSCALE_CPAR); } else { - dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->vec_len = EX_TBFLAG_A32(tb_flags, VECLEN); + dc->vec_stride = EX_TBFLAG_A32(tb_flags, VECSTRIDE); } } dc->cp_regs = cpu->cp_regs; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) * emit code to generate a software step exception * end the TB */ - dc->ss_active = FIELD_EX32(tb_flags, TBFLAG_ANY, SS_ACTIVE); - dc->pstate_ss = FIELD_EX32(tb_flags, TBFLAG_ANY, PSTATE__SS); + dc->ss_active = EX_TBFLAG_ANY(tb_flags, SS_ACTIVE); + dc->pstate_ss = EX_TBFLAG_ANY(tb_flags, PSTATE__SS); dc->is_ldex = false; dc->page_start = dc->base.pc_first & TARGET_PAGE_MASK; @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cpu, TranslationBlock *tb, int max_insns) DisasContext dc = { }; const TranslatorOps *ops = &arm_translator_ops; - if (FIELD_EX32(tb->flags, TBFLAG_AM32, THUMB)) { + if (EX_TBFLAG_AM32(tb->flags, THUMB)) { ops = &thumb_translator_ops; } #ifdef TARGET_AARCH64 - if (FIELD_EX32(tb->flags, TBFLAG_ANY, AARCH64_STATE)) { + if (EX_TBFLAG_ANY(tb->flags, AARCH64_STATE)) { ops = &aarch64_translator_ops; } #endif -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In preparation for splitting tb->flags across multiple fields, introduce a structure to hold the value(s). So far this only migrates the one uint32_t and fixes all of the places that require adjustment to match. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 26 ++++++++++++--------- target/arm/translate.h | 11 +++++++++ target/arm/helper.c | 48 +++++++++++++++++++++----------------- target/arm/translate-a64.c | 2 +- target/arm/translate.c | 7 +++--- 5 files changed, 57 insertions(+), 37 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMPACKey { } ARMPACKey; #endif +/* See the commentary above the TBFLAG field definitions. */ +typedef struct CPUARMTBFlags { + uint32_t flags; +} CPUARMTBFlags; typedef struct CPUARMState { /* Regs for current mode. */ @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t aarch64; /* 1 if CPU is in aarch64 state; inverse of PSTATE.nRW */ /* Cached TBFLAGS state. See below for which bits are included. */ - uint32_t hflags; + CPUARMTBFlags hflags; /* Frequently accessed CPSR bits are stored separately for efficiency. This contains all the other bits. Use cpsr_{read,write} to access @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, MTE0_ACTIVE, 19, 1) * Helpers for using the above. */ #define DP_TBFLAG_ANY(DST, WHICH, VAL) \ - (DST = FIELD_DP32(DST, TBFLAG_ANY, WHICH, VAL)) + (DST.flags = FIELD_DP32(DST.flags, TBFLAG_ANY, WHICH, VAL)) #define DP_TBFLAG_A64(DST, WHICH, VAL) \ - (DST = FIELD_DP32(DST, TBFLAG_A64, WHICH, VAL)) + (DST.flags = FIELD_DP32(DST.flags, TBFLAG_A64, WHICH, VAL)) #define DP_TBFLAG_A32(DST, WHICH, VAL) \ - (DST = FIELD_DP32(DST, TBFLAG_A32, WHICH, VAL)) + (DST.flags = FIELD_DP32(DST.flags, TBFLAG_A32, WHICH, VAL)) #define DP_TBFLAG_M32(DST, WHICH, VAL) \ - (DST = FIELD_DP32(DST, TBFLAG_M32, WHICH, VAL)) + (DST.flags = FIELD_DP32(DST.flags, TBFLAG_M32, WHICH, VAL)) #define DP_TBFLAG_AM32(DST, WHICH, VAL) \ - (DST = FIELD_DP32(DST, TBFLAG_AM32, WHICH, VAL)) + (DST.flags = FIELD_DP32(DST.flags, TBFLAG_AM32, WHICH, VAL)) -#define EX_TBFLAG_ANY(IN, WHICH) FIELD_EX32(IN, TBFLAG_ANY, WHICH) -#define EX_TBFLAG_A64(IN, WHICH) FIELD_EX32(IN, TBFLAG_A64, WHICH) -#define EX_TBFLAG_A32(IN, WHICH) FIELD_EX32(IN, TBFLAG_A32, WHICH) -#define EX_TBFLAG_M32(IN, WHICH) FIELD_EX32(IN, TBFLAG_M32, WHICH) -#define EX_TBFLAG_AM32(IN, WHICH) FIELD_EX32(IN, TBFLAG_AM32, WHICH) +#define EX_TBFLAG_ANY(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_ANY, WHICH) +#define EX_TBFLAG_A64(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_A64, WHICH) +#define EX_TBFLAG_A32(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_A32, WHICH) +#define EX_TBFLAG_M32(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_M32, WHICH) +#define EX_TBFLAG_AM32(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_AM32, WHICH) /** * cpu_mmu_index: diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void CryptoThreeOpIntFn(TCGv_ptr, TCGv_ptr, TCGv_i32); typedef void CryptoThreeOpFn(TCGv_ptr, TCGv_ptr, TCGv_ptr); typedef void AtomicThreeOpFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGArg, MemOp); +/** + * arm_tbflags_from_tb: + * @tb: the TranslationBlock + * + * Extract the flag values from @tb. + */ +static inline CPUARMTBFlags arm_tbflags_from_tb(const TranslationBlock *tb) +{ + return (CPUARMTBFlags){ tb->flags }; +} + /* * Enum for argument to fpstatus_ptr(). */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) } #endif -static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, - ARMMMUIdx mmu_idx, uint32_t flags) +static CPUARMTBFlags rebuild_hflags_common(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx, + CPUARMTBFlags flags) { DP_TBFLAG_ANY(flags, FPEXC_EL, fp_el); DP_TBFLAG_ANY(flags, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, return flags; } -static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, - ARMMMUIdx mmu_idx, uint32_t flags) +static CPUARMTBFlags rebuild_hflags_common_32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx, + CPUARMTBFlags flags) { bool sctlr_b = arm_sctlr_b(env); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, return rebuild_hflags_common(env, fp_el, mmu_idx, flags); } -static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, - ARMMMUIdx mmu_idx) +static CPUARMTBFlags rebuild_hflags_m32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx) { - uint32_t flags = 0; + CPUARMTBFlags flags = {}; if (arm_v7m_is_handler_mode(env)) { DP_TBFLAG_M32(flags, HANDLER, 1); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } -static uint32_t rebuild_hflags_aprofile(CPUARMState *env) +static CPUARMTBFlags rebuild_hflags_aprofile(CPUARMState *env) { - int flags = 0; + CPUARMTBFlags flags = {}; DP_TBFLAG_ANY(flags, DEBUG_TARGET_EL, arm_debug_target_el(env)); return flags; } -static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, - ARMMMUIdx mmu_idx) +static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx) { - uint32_t flags = rebuild_hflags_aprofile(env); + CPUARMTBFlags flags = rebuild_hflags_aprofile(env); if (arm_el_is_aa64(env, 1)) { DP_TBFLAG_A32(flags, VFPEN, 1); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } -static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, - ARMMMUIdx mmu_idx) +static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, + ARMMMUIdx mmu_idx) { - uint32_t flags = rebuild_hflags_aprofile(env); + CPUARMTBFlags flags = rebuild_hflags_aprofile(env); ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; uint64_t sctlr; @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, return rebuild_hflags_common(env, fp_el, mmu_idx, flags); } -static uint32_t rebuild_hflags_internal(CPUARMState *env) +static CPUARMTBFlags rebuild_hflags_internal(CPUARMState *env) { int el = arm_current_el(env); int fp_el = fp_exception_el(env, el); @@ -XXX,XX +XXX,XX @@ void HELPER(rebuild_hflags_m32_newel)(CPUARMState *env) int el = arm_current_el(env); int fp_el = fp_exception_el(env, el); ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); } @@ -XXX,XX +XXX,XX @@ void HELPER(rebuild_hflags_a64)(CPUARMState *env, int el) static inline void assert_hflags_rebuild_correctly(CPUARMState *env) { #ifdef CONFIG_DEBUG_TCG - uint32_t env_flags_current = env->hflags; - uint32_t env_flags_rebuilt = rebuild_hflags_internal(env); + CPUARMTBFlags c = env->hflags; + CPUARMTBFlags r = rebuild_hflags_internal(env); - if (unlikely(env_flags_current != env_flags_rebuilt)) { + if (unlikely(c.flags != r.flags)) { fprintf(stderr, "TCG hflags mismatch (current:0x%08x rebuilt:0x%08x)\n", - env_flags_current, env_flags_rebuilt); + c.flags, r.flags); abort(); } #endif @@ -XXX,XX +XXX,XX @@ static inline void assert_hflags_rebuild_correctly(CPUARMState *env) void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { - uint32_t flags = env->hflags; + CPUARMTBFlags flags; *cs_base = 0; assert_hflags_rebuild_correctly(env); + flags = env->hflags; if (EX_TBFLAG_ANY(flags, AARCH64_STATE)) { *pc = env->pc; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, DP_TBFLAG_ANY(flags, PSTATE__SS, 1); } - *pflags = flags; + *pflags = flags.flags; } #ifdef TARGET_AARCH64 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; ARMCPU *arm_cpu = env_archcpu(env); - uint32_t tb_flags = dc->base.tb->flags; + CPUARMTBFlags tb_flags = arm_tbflags_from_tb(dc->base.tb); int bound, core_mmu_idx; dc->isar = &arm_cpu->isar; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cs->env_ptr; ARMCPU *cpu = env_archcpu(env); - uint32_t tb_flags = dc->base.tb->flags; + CPUARMTBFlags tb_flags = arm_tbflags_from_tb(dc->base.tb); uint32_t condexec, core_mmu_idx; dc->isar = &cpu->isar; @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cpu, TranslationBlock *tb, int max_insns) { DisasContext dc = { }; const TranslatorOps *ops = &arm_translator_ops; + CPUARMTBFlags tb_flags = arm_tbflags_from_tb(tb); - if (EX_TBFLAG_AM32(tb->flags, THUMB)) { + if (EX_TBFLAG_AM32(tb_flags, THUMB)) { ops = &thumb_translator_ops; } #ifdef TARGET_AARCH64 - if (EX_TBFLAG_ANY(tb->flags, AARCH64_STATE)) { + if (EX_TBFLAG_ANY(tb_flags, AARCH64_STATE)) { ops = &aarch64_translator_ops; } #endif -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Now that we have all of the proper macros defined, expanding the CPUARMTBFlags structure and populating the two TB fields is relatively simple. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 49 ++++++++++++++++++++++++------------------ target/arm/translate.h | 2 +- target/arm/helper.c | 10 +++++---- 3 files changed, 35 insertions(+), 26 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMPACKey { /* See the commentary above the TBFLAG field definitions. */ typedef struct CPUARMTBFlags { uint32_t flags; + target_ulong flags2; } CPUARMTBFlags; typedef struct CPUARMState { @@ -XXX,XX +XXX,XX @@ typedef ARMCPU ArchCPU; #include "exec/cpu-all.h" /* - * Bit usage in the TB flags field: bit 31 indicates whether we are - * in 32 or 64 bit mode. The meaning of the other bits depends on that. - * We put flags which are shared between 32 and 64 bit mode at the top - * of the word, and flags which apply to only one mode at the bottom. + * We have more than 32-bits worth of state per TB, so we split the data + * between tb->flags and tb->cs_base, which is otherwise unused for ARM. + * We collect these two parts in CPUARMTBFlags where they are named + * flags and flags2 respectively. * - * 31 20 18 14 9 0 - * +--------------+-----+-----+----------+--------------+ - * | | | TBFLAG_A32 | | - * | | +-----+----------+ TBFLAG_AM32 | - * | TBFLAG_ANY | |TBFLAG_M32| | - * | +-----------+----------+--------------| - * | | TBFLAG_A64 | - * +--------------+-------------------------------------+ - * 31 20 0 + * The flags that are shared between all execution modes, TBFLAG_ANY, + * are stored in flags. The flags that are specific to a given mode + * are stores in flags2. Since cs_base is sized on the configured + * address size, flags2 always has 64-bits for A64, and a minimum of + * 32-bits for A32 and M32. + * + * The bits for 32-bit A-profile and M-profile partially overlap: + * + * 18 9 0 + * +----------------+--------------+ + * | TBFLAG_A32 | | + * +-----+----------+ TBFLAG_AM32 | + * | |TBFLAG_M32| | + * +-----+----------+--------------+ + * 14 9 0 * * Unless otherwise noted, these bits are cached in env->hflags. */ @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, MTE0_ACTIVE, 19, 1) #define DP_TBFLAG_ANY(DST, WHICH, VAL) \ (DST.flags = FIELD_DP32(DST.flags, TBFLAG_ANY, WHICH, VAL)) #define DP_TBFLAG_A64(DST, WHICH, VAL) \ - (DST.flags = FIELD_DP32(DST.flags, TBFLAG_A64, WHICH, VAL)) + (DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_A64, WHICH, VAL)) #define DP_TBFLAG_A32(DST, WHICH, VAL) \ - (DST.flags = FIELD_DP32(DST.flags, TBFLAG_A32, WHICH, VAL)) + (DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_A32, WHICH, VAL)) #define DP_TBFLAG_M32(DST, WHICH, VAL) \ - (DST.flags = FIELD_DP32(DST.flags, TBFLAG_M32, WHICH, VAL)) + (DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_M32, WHICH, VAL)) #define DP_TBFLAG_AM32(DST, WHICH, VAL) \ - (DST.flags = FIELD_DP32(DST.flags, TBFLAG_AM32, WHICH, VAL)) + (DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_AM32, WHICH, VAL)) #define EX_TBFLAG_ANY(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_ANY, WHICH) -#define EX_TBFLAG_A64(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_A64, WHICH) -#define EX_TBFLAG_A32(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_A32, WHICH) -#define EX_TBFLAG_M32(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_M32, WHICH) -#define EX_TBFLAG_AM32(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_AM32, WHICH) +#define EX_TBFLAG_A64(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_A64, WHICH) +#define EX_TBFLAG_A32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_A32, WHICH) +#define EX_TBFLAG_M32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_M32, WHICH) +#define EX_TBFLAG_AM32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_AM32, WHICH) /** * cpu_mmu_index: diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void AtomicThreeOpFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGArg, MemOp); */ static inline CPUARMTBFlags arm_tbflags_from_tb(const TranslationBlock *tb) { - return (CPUARMTBFlags){ tb->flags }; + return (CPUARMTBFlags){ tb->flags, tb->cs_base }; } /* diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline void assert_hflags_rebuild_correctly(CPUARMState *env) CPUARMTBFlags c = env->hflags; CPUARMTBFlags r = rebuild_hflags_internal(env); - if (unlikely(c.flags != r.flags)) { - fprintf(stderr, "TCG hflags mismatch (current:0x%08x rebuilt:0x%08x)\n", - c.flags, r.flags); + if (unlikely(c.flags != r.flags || c.flags2 != r.flags2)) { + fprintf(stderr, "TCG hflags mismatch " + "(current:(0x%08x,0x" TARGET_FMT_lx ")" + " rebuilt:(0x%08x,0x" TARGET_FMT_lx ")\n", + c.flags, c.flags2, r.flags, r.flags2); abort(); } #endif @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, { CPUARMTBFlags flags; - *cs_base = 0; assert_hflags_rebuild_correctly(env); flags = env->hflags; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } *pflags = flags.flags; + *cs_base = flags.flags2; } #ifdef TARGET_AARCH64 -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Now that these bits have been moved out of tb->flags, where TBFLAG_ANY was filling from the top, move AM32 to fill from the top, and A32 and M32 to fill from the bottom. This means fewer changes when adding new bits. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef ARMCPU ArchCPU; * * The bits for 32-bit A-profile and M-profile partially overlap: * - * 18 9 0 - * +----------------+--------------+ - * | TBFLAG_A32 | | - * +-----+----------+ TBFLAG_AM32 | - * | |TBFLAG_M32| | - * +-----+----------+--------------+ - * 14 9 0 + * 31 23 11 10 0 + * +-------------+----------+----------------+ + * | | | TBFLAG_A32 | + * | TBFLAG_AM32 | +-----+----------+ + * | | |TBFLAG_M32| + * +-------------+----------------+----------+ + * 31 23 5 4 0 * * Unless otherwise noted, these bits are cached in env->hflags. */ @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 20, 2) /* * Bit usage when in AArch32 state, both A- and M-profile. */ -FIELD(TBFLAG_AM32, CONDEXEC, 0, 8) /* Not cached. */ -FIELD(TBFLAG_AM32, THUMB, 8, 1) /* Not cached. */ +FIELD(TBFLAG_AM32, CONDEXEC, 24, 8) /* Not cached. */ +FIELD(TBFLAG_AM32, THUMB, 23, 1) /* Not cached. */ /* * Bit usage when in AArch32 state, for A-profile only. */ -FIELD(TBFLAG_A32, VECLEN, 9, 3) /* Not cached. */ -FIELD(TBFLAG_A32, VECSTRIDE, 12, 2) /* Not cached. */ +FIELD(TBFLAG_A32, VECLEN, 0, 3) /* Not cached. */ +FIELD(TBFLAG_A32, VECSTRIDE, 3, 2) /* Not cached. */ /* * We store the bottom two bits of the CPAR as TB flags and handle * checks on the other bits at runtime. This shares the same bits as * VECSTRIDE, which is OK as no XScale CPU has VFP. * Not cached, because VECLEN+VECSTRIDE are not cached. */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 12, 2) -FIELD(TBFLAG_A32, VFPEN, 14, 1) /* Partially cached, minus FPEXC. */ -FIELD(TBFLAG_A32, SCTLR__B, 15, 1) /* Cannot overlap with SCTLR_B */ -FIELD(TBFLAG_A32, HSTR_ACTIVE, 16, 1) +FIELD(TBFLAG_A32, XSCALE_CPAR, 5, 2) +FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Partially cached, minus FPEXC. */ +FIELD(TBFLAG_A32, SCTLR__B, 8, 1) /* Cannot overlap with SCTLR_B */ +FIELD(TBFLAG_A32, HSTR_ACTIVE, 9, 1) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not * the same thing as the current security state of the processor! */ -FIELD(TBFLAG_A32, NS, 17, 1) +FIELD(TBFLAG_A32, NS, 10, 1) /* * Bit usage when in AArch32 state, for M-profile only. */ /* Handler (ie not Thread) mode */ -FIELD(TBFLAG_M32, HANDLER, 9, 1) +FIELD(TBFLAG_M32, HANDLER, 0, 1) /* Whether we should generate stack-limit checks */ -FIELD(TBFLAG_M32, STACKCHECK, 10, 1) +FIELD(TBFLAG_M32, STACKCHECK, 1, 1) /* Set if FPCCR.LSPACT is set */ -FIELD(TBFLAG_M32, LSPACT, 11, 1) /* Not cached. */ +FIELD(TBFLAG_M32, LSPACT, 2, 1) /* Not cached. */ /* Set if we must create a new FP context */ -FIELD(TBFLAG_M32, NEW_FP_CTXT_NEEDED, 12, 1) /* Not cached. */ +FIELD(TBFLAG_M32, NEW_FP_CTXT_NEEDED, 3, 1) /* Not cached. */ /* Set if FPCCR.S does not match current security state */ -FIELD(TBFLAG_M32, FPCCR_S_WRONG, 13, 1) /* Not cached. */ +FIELD(TBFLAG_M32, FPCCR_S_WRONG, 4, 1) /* Not cached. */ /* * Bit usage when in AArch64 state -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Now that other bits have been moved out of tb->flags, there's no point in filling from the top. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef ARMCPU ArchCPU; * * Unless otherwise noted, these bits are cached in env->hflags. */ -FIELD(TBFLAG_ANY, AARCH64_STATE, 31, 1) -FIELD(TBFLAG_ANY, SS_ACTIVE, 30, 1) -FIELD(TBFLAG_ANY, PSTATE__SS, 29, 1) /* Not cached. */ -FIELD(TBFLAG_ANY, BE_DATA, 28, 1) -FIELD(TBFLAG_ANY, MMUIDX, 24, 4) +FIELD(TBFLAG_ANY, AARCH64_STATE, 0, 1) +FIELD(TBFLAG_ANY, SS_ACTIVE, 1, 1) +FIELD(TBFLAG_ANY, PSTATE__SS, 2, 1) /* Not cached. */ +FIELD(TBFLAG_ANY, BE_DATA, 3, 1) +FIELD(TBFLAG_ANY, MMUIDX, 4, 4) /* Target EL if we take a floating-point-disabled exception */ -FIELD(TBFLAG_ANY, FPEXC_EL, 22, 2) +FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2) /* For A-profile only, target EL for debug exceptions. */ -FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 20, 2) +FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 10, 2) /* * Bit usage when in AArch32 state, both A- and M-profile. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use this to signal when memory access alignment is required. This value comes from the CCR register for M-profile, and from the SCTLR register for A-profile. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 2 ++ target/arm/helper.c | 19 +++++++++++++++++-- target/arm/translate-a64.c | 1 + target/arm/translate.c | 7 +++---- 5 files changed, 25 insertions(+), 6 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, MMUIDX, 4, 4) FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2) /* For A-profile only, target EL for debug exceptions. */ FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 10, 2) +/* Memory operations require alignment: SCTLR_ELx.A or CCR.UNALIGN_TRP */ +FIELD(TBFLAG_ANY, ALIGN_MEM, 12, 1) /* * Bit usage when in AArch32 state, both A- and M-profile. diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool bt; /* True if any CP15 access is trapped by HSTR_EL2 */ bool hstr_active; + /* True if memory operations require alignment */ + bool align_mem; /* * >= 0, a copy of PSTATE.BTYPE, which will be 0 without v8.5-BTI. * < 0, set by the current instruction. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_m32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx) { CPUARMTBFlags flags = {}; + uint32_t ccr = env->v7m.ccr[env->v7m.secure]; + + /* Without HaveMainExt, CCR.UNALIGN_TRP is RES1. */ + if (ccr & R_V7M_CCR_UNALIGN_TRP_MASK) { + DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); + } if (arm_v7m_is_handler_mode(env)) { DP_TBFLAG_M32(flags, HANDLER, 1); @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_m32(CPUARMState *env, int fp_el, */ if (arm_feature(env, ARM_FEATURE_V8) && !((mmu_idx & ARM_MMU_IDX_M_NEGPRI) && - (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKOFHFNMIGN_MASK))) { + (ccr & R_V7M_CCR_STKOFHFNMIGN_MASK))) { DP_TBFLAG_M32(flags, STACKCHECK, 1); } @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx) { CPUARMTBFlags flags = rebuild_hflags_aprofile(env); + int el = arm_current_el(env); + + if (arm_sctlr(env, el) & SCTLR_A) { + DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); + } if (arm_el_is_aa64(env, 1)) { DP_TBFLAG_A32(flags, VFPEN, 1); } - if (arm_current_el(env) < 2 && env->cp15.hstr_el2 && + if (el < 2 && env->cp15.hstr_el2 && (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { DP_TBFLAG_A32(flags, HSTR_ACTIVE, 1); } @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, sctlr = regime_sctlr(env, stage1); + if (sctlr & SCTLR_A) { + DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); + } + if (arm_cpu_data_is_big_endian_a64(el, sctlr)) { DP_TBFLAG_ANY(flags, BE_DATA, 1); } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->user = (dc->current_el == 0); #endif dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL); + dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); dc->sve_excp_el = EX_TBFLAG_A64(tb_flags, SVEEXC_EL); dc->sve_len = (EX_TBFLAG_A64(tb_flags, ZCR_LEN) + 1) * 16; dc->pauth_active = EX_TBFLAG_A64(tb_flags, PAUTH_ACTIVE); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_aa32_ld_i32(DisasContext *s, TCGv_i32 val, TCGv_i32 a32, { TCGv addr; - if (arm_dc_feature(s, ARM_FEATURE_M) && - !arm_dc_feature(s, ARM_FEATURE_M_MAIN)) { + if (s->align_mem) { opc |= MO_ALIGN; } @@ -XXX,XX +XXX,XX @@ static void gen_aa32_st_i32(DisasContext *s, TCGv_i32 val, TCGv_i32 a32, { TCGv addr; - if (arm_dc_feature(s, ARM_FEATURE_M) && - !arm_dc_feature(s, ARM_FEATURE_M_MAIN)) { + if (s->align_mem) { opc |= MO_ALIGN; } @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->user = (dc->current_el == 0); #endif dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL); + dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); if (arm_feature(env, ARM_FEATURE_M)) { dc->vfp_enabled = 1; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a finalize_memop function that computes alignment and endianness and returns the final MemOp for the operation. Split out gen_aa32_{ld,st}_internal_i32 which bypasses any special handling of endianness or alignment. Adjust gen_aa32_{ld,st}_i32 so that s->be_data is not added by the callers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 24 ++++++++ target/arm/translate.c | 100 +++++++++++++++++--------------- target/arm/translate-neon.c.inc | 9 +-- 3 files changed, 79 insertions(+), 54 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline TCGv_ptr fpstatus_ptr(ARMFPStatusFlavour flavour) return statusptr; } +/** + * finalize_memop: + * @s: DisasContext + * @opc: size+sign+align of the memory operation + * + * Build the complete MemOp for a memory operation, including alignment + * and endianness. + * + * If (op & MO_AMASK) then the operation already contains the required + * alignment, e.g. for AccType_ATOMIC. Otherwise, this an optionally + * unaligned operation, e.g. for AccType_NORMAL. + * + * In the latter case, there are configuration bits that require alignment, + * and this is applied here. Note that there is no way to indicate that + * no alignment should ever be enforced; this must be handled manually. + */ +static inline MemOp finalize_memop(DisasContext *s, MemOp opc) +{ + if (s->align_mem && !(opc & MO_AMASK)) { + opc |= MO_ALIGN; + } + return opc | s->be_data; +} + #endif /* TARGET_ARM_TRANSLATE_H */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void store_reg_from_load(DisasContext *s, int reg, TCGv_i32 var) #define IS_USER_ONLY 0 #endif -/* Abstractions of "generate code to do a guest load/store for +/* + * Abstractions of "generate code to do a guest load/store for * AArch32", where a vaddr is always 32 bits (and is zero * extended if we're a 64 bit core) and data is also * 32 bits unless specifically doing a 64 bit access. @@ -XXX,XX +XXX,XX @@ static inline void store_reg_from_load(DisasContext *s, int reg, TCGv_i32 var) * that the address argument is TCGv_i32 rather than TCGv. */ -static inline TCGv gen_aa32_addr(DisasContext *s, TCGv_i32 a32, MemOp op) +static TCGv gen_aa32_addr(DisasContext *s, TCGv_i32 a32, MemOp op) { TCGv addr = tcg_temp_new(); tcg_gen_extu_i32_tl(addr, a32); @@ -XXX,XX +XXX,XX @@ static inline TCGv gen_aa32_addr(DisasContext *s, TCGv_i32 a32, MemOp op) return addr; } +/* + * Internal routines are used for NEON cases where the endianness + * and/or alignment has already been taken into account and manipulated. + */ +static void gen_aa32_ld_internal_i32(DisasContext *s, TCGv_i32 val, + TCGv_i32 a32, int index, MemOp opc) +{ + TCGv addr = gen_aa32_addr(s, a32, opc); + tcg_gen_qemu_ld_i32(val, addr, index, opc); + tcg_temp_free(addr); +} + +static void gen_aa32_st_internal_i32(DisasContext *s, TCGv_i32 val, + TCGv_i32 a32, int index, MemOp opc) +{ + TCGv addr = gen_aa32_addr(s, a32, opc); + tcg_gen_qemu_st_i32(val, addr, index, opc); + tcg_temp_free(addr); +} + static void gen_aa32_ld_i32(DisasContext *s, TCGv_i32 val, TCGv_i32 a32, int index, MemOp opc) { - TCGv addr; - - if (s->align_mem) { - opc |= MO_ALIGN; - } - - addr = gen_aa32_addr(s, a32, opc); - tcg_gen_qemu_ld_i32(val, addr, index, opc); - tcg_temp_free(addr); + gen_aa32_ld_internal_i32(s, val, a32, index, finalize_memop(s, opc)); } static void gen_aa32_st_i32(DisasContext *s, TCGv_i32 val, TCGv_i32 a32, int index, MemOp opc) { - TCGv addr; + gen_aa32_st_internal_i32(s, val, a32, index, finalize_memop(s, opc)); +} - if (s->align_mem) { - opc |= MO_ALIGN; +#define DO_GEN_LD(SUFF, OPC) \ + static inline void gen_aa32_ld##SUFF(DisasContext *s, TCGv_i32 val, \ + TCGv_i32 a32, int index) \ + { \ + gen_aa32_ld_i32(s, val, a32, index, OPC); \ } - addr = gen_aa32_addr(s, a32, opc); - tcg_gen_qemu_st_i32(val, addr, index, opc); - tcg_temp_free(addr); -} - -#define DO_GEN_LD(SUFF, OPC) \ -static inline void gen_aa32_ld##SUFF(DisasContext *s, TCGv_i32 val, \ - TCGv_i32 a32, int index) \ -{ \ - gen_aa32_ld_i32(s, val, a32, index, OPC | s->be_data); \ -} - -#define DO_GEN_ST(SUFF, OPC) \ -static inline void gen_aa32_st##SUFF(DisasContext *s, TCGv_i32 val, \ - TCGv_i32 a32, int index) \ -{ \ - gen_aa32_st_i32(s, val, a32, index, OPC | s->be_data); \ -} +#define DO_GEN_ST(SUFF, OPC) \ + static inline void gen_aa32_st##SUFF(DisasContext *s, TCGv_i32 val, \ + TCGv_i32 a32, int index) \ + { \ + gen_aa32_st_i32(s, val, a32, index, OPC); \ + } static inline void gen_aa32_frob64(DisasContext *s, TCGv_i64 val) { @@ -XXX,XX +XXX,XX @@ static bool op_load_rr(DisasContext *s, arg_ldst_rr *a, addr = op_addr_rr_pre(s, a); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, mop | s->be_data); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, mop); disas_set_da_iss(s, mop, issinfo); /* @@ -XXX,XX +XXX,XX @@ static bool op_store_rr(DisasContext *s, arg_ldst_rr *a, addr = op_addr_rr_pre(s, a); tmp = load_reg(s, a->rt); - gen_aa32_st_i32(s, tmp, addr, mem_idx, mop | s->be_data); + gen_aa32_st_i32(s, tmp, addr, mem_idx, mop); disas_set_da_iss(s, mop, issinfo); tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_LDRD_rr(DisasContext *s, arg_ldst_rr *a) addr = op_addr_rr_pre(s, a); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | s->be_data); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL); store_reg(s, a->rt, tmp); tcg_gen_addi_i32(addr, addr, 4); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | s->be_data); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL); store_reg(s, a->rt + 1, tmp); /* LDRD w/ base writeback is undefined if the registers overlap. */ @@ -XXX,XX +XXX,XX @@ static bool trans_STRD_rr(DisasContext *s, arg_ldst_rr *a) addr = op_addr_rr_pre(s, a); tmp = load_reg(s, a->rt); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | s->be_data); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL); tcg_temp_free_i32(tmp); tcg_gen_addi_i32(addr, addr, 4); tmp = load_reg(s, a->rt + 1); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | s->be_data); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL); tcg_temp_free_i32(tmp); op_addr_rr_post(s, a, addr, -4); @@ -XXX,XX +XXX,XX @@ static bool op_load_ri(DisasContext *s, arg_ldst_ri *a, addr = op_addr_ri_pre(s, a); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, mop | s->be_data); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, mop); disas_set_da_iss(s, mop, issinfo); /* @@ -XXX,XX +XXX,XX @@ static bool op_store_ri(DisasContext *s, arg_ldst_ri *a, addr = op_addr_ri_pre(s, a); tmp = load_reg(s, a->rt); - gen_aa32_st_i32(s, tmp, addr, mem_idx, mop | s->be_data); + gen_aa32_st_i32(s, tmp, addr, mem_idx, mop); disas_set_da_iss(s, mop, issinfo); tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool op_ldrd_ri(DisasContext *s, arg_ldst_ri *a, int rt2) addr = op_addr_ri_pre(s, a); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | s->be_data); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL); store_reg(s, a->rt, tmp); tcg_gen_addi_i32(addr, addr, 4); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | s->be_data); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL); store_reg(s, rt2, tmp); /* LDRD w/ base writeback is undefined if the registers overlap. */ @@ -XXX,XX +XXX,XX @@ static bool op_strd_ri(DisasContext *s, arg_ldst_ri *a, int rt2) addr = op_addr_ri_pre(s, a); tmp = load_reg(s, a->rt); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | s->be_data); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL); tcg_temp_free_i32(tmp); tcg_gen_addi_i32(addr, addr, 4); tmp = load_reg(s, rt2); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | s->be_data); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL); tcg_temp_free_i32(tmp); op_addr_ri_post(s, a, addr, -4); @@ -XXX,XX +XXX,XX @@ static bool op_stl(DisasContext *s, arg_STL *a, MemOp mop) addr = load_reg(s, a->rn); tmp = load_reg(s, a->rt); tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); - gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), mop | s->be_data); + gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), mop); disas_set_da_iss(s, mop, a->rt | ISSIsAcqRel | ISSIsWrite); tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool op_lda(DisasContext *s, arg_LDA *a, MemOp mop) addr = load_reg(s, a->rn); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), mop | s->be_data); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), mop); disas_set_da_iss(s, mop, a->rt | ISSIsAcqRel); tcg_temp_free_i32(addr); @@ -XXX,XX +XXX,XX @@ static bool op_tbranch(DisasContext *s, arg_tbranch *a, bool half) addr = load_reg(s, a->rn); tcg_gen_add_i32(addr, addr, tmp); - gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), - half ? MO_UW | s->be_data : MO_UB); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), half ? MO_UW : MO_UB); tcg_temp_free_i32(addr); tcg_gen_add_i32(tmp, tmp, tmp); diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLD_all_lanes(DisasContext *s, arg_VLD_all_lanes *a) addr = tcg_temp_new_i32(); load_reg_var(s, addr, a->rn); for (reg = 0; reg < nregs; reg++) { - gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), - s->be_data | size); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), size); if ((vd & 1) && vec_size == 16) { /* * We cannot write 16 bytes at once because the @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_single(DisasContext *s, arg_VLDST_single *a) */ for (reg = 0; reg < nregs; reg++) { if (a->l) { - gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), - s->be_data | a->size); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), a->size); neon_store_element(vd, a->reg_idx, a->size, tmp); } else { /* Store */ neon_load_element(tmp, vd, a->reg_idx, a->size); - gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), - s->be_data | a->size); + gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), a->size); } vd += a->stride; tcg_gen_addi_i32(addr, addr, 1 << a->size); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the only caller. Adjust some commentary to talk about SCTLR_B instead of the vanishing function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 37 ++++++++++++++++--------------------- 1 file changed, 16 insertions(+), 21 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_aa32_st_i32(DisasContext *s, TCGv_i32 val, TCGv_i32 a32, gen_aa32_st_i32(s, val, a32, index, OPC); \ } -static inline void gen_aa32_frob64(DisasContext *s, TCGv_i64 val) -{ - /* Not needed for user-mode BE32, where we use MO_BE instead. */ - if (!IS_USER_ONLY && s->sctlr_b) { - tcg_gen_rotri_i64(val, val, 32); - } -} - static void gen_aa32_ld_i64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, int index, MemOp opc) { TCGv addr = gen_aa32_addr(s, a32, opc); tcg_gen_qemu_ld_i64(val, addr, index, opc); - gen_aa32_frob64(s, val); + + /* Not needed for user-mode BE32, where we use MO_BE instead. */ + if (!IS_USER_ONLY && s->sctlr_b) { + tcg_gen_rotri_i64(val, val, 32); + } + tcg_temp_free(addr); } @@ -XXX,XX +XXX,XX @@ static void gen_load_exclusive(DisasContext *s, int rt, int rt2, TCGv_i32 tmp2 = tcg_temp_new_i32(); TCGv_i64 t64 = tcg_temp_new_i64(); - /* For AArch32, architecturally the 32-bit word at the lowest + /* + * For AArch32, architecturally the 32-bit word at the lowest * address is always Rt and the one at addr+4 is Rt2, even if * the CPU is big-endian. That means we don't want to do a - * gen_aa32_ld_i64(), which invokes gen_aa32_frob64() as if - * for an architecturally 64-bit access, but instead do a - * 64-bit access using MO_BE if appropriate and then split - * the two halves. - * This only makes a difference for BE32 user-mode, where - * frob64() must not flip the two halves of the 64-bit data - * but this code must treat BE32 user-mode like BE32 system. + * gen_aa32_ld_i64(), which checks SCTLR_B as if for an + * architecturally 64-bit access, but instead do a 64-bit access + * using MO_BE if appropriate and then split the two halves. */ TCGv taddr = gen_aa32_addr(s, addr, opc); @@ -XXX,XX +XXX,XX @@ static void gen_store_exclusive(DisasContext *s, int rd, int rt, int rt2, TCGv_i64 n64 = tcg_temp_new_i64(); t2 = load_reg(s, rt2); - /* For AArch32, architecturally the 32-bit word at the lowest + + /* + * For AArch32, architecturally the 32-bit word at the lowest * address is always Rt and the one at addr+4 is Rt2, even if * the CPU is big-endian. Since we're going to treat this as a * single 64-bit BE store, we need to put the two halves in the * opposite order for BE to LE, so that they end up in the right - * places. - * We don't want gen_aa32_frob64() because that does the wrong - * thing for BE32 usermode. + * places. We don't want gen_aa32_st_i64, because that checks + * SCTLR_B as if for an architectural 64-bit access. */ if (s->be_data == MO_BE) { tcg_gen_concat_i32_i64(n64, t2, t1); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Just because operating on a TCGv_i64 temporary does not mean that we're performing a 64-bit operation. Restrict the frobbing to actual 64-bit operations. This bug is not currently visible because all current users of these two functions always pass MO_64. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_aa32_ld_i64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, tcg_gen_qemu_ld_i64(val, addr, index, opc); /* Not needed for user-mode BE32, where we use MO_BE instead. */ - if (!IS_USER_ONLY && s->sctlr_b) { + if (!IS_USER_ONLY && s->sctlr_b && (opc & MO_SIZE) == MO_64) { tcg_gen_rotri_i64(val, val, 32); } @@ -XXX,XX +XXX,XX @@ static void gen_aa32_st_i64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, TCGv addr = gen_aa32_addr(s, a32, opc); /* Not needed for user-mode BE32, where we use MO_BE instead. */ - if (!IS_USER_ONLY && s->sctlr_b) { + if (!IS_USER_ONLY && s->sctlr_b && (opc & MO_SIZE) == MO_64) { TCGv_i64 tmp = tcg_temp_new_i64(); tcg_gen_rotri_i64(tmp, val, 32); tcg_gen_qemu_st_i64(tmp, addr, index, opc); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Adjust the interface to match what has been done to the TCGv_i32 load/store functions. This is less obvious, because at present the only user of these functions, trans_VLDST_multiple, also wants to manipulate the endianness to speed up loading multiple bytes. Thus we retain an "internal" interface which is identical to the current gen_aa32_{ld,st}_i64 interface. The "new" interface will gain users as we remove the legacy interfaces, gen_aa32_ld64 and gen_aa32_st64. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 78 +++++++++++++++++++-------------- target/arm/translate-neon.c.inc | 6 ++- 2 files changed, 49 insertions(+), 35 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_aa32_st_internal_i32(DisasContext *s, TCGv_i32 val, tcg_temp_free(addr); } +static void gen_aa32_ld_internal_i64(DisasContext *s, TCGv_i64 val, + TCGv_i32 a32, int index, MemOp opc) +{ + TCGv addr = gen_aa32_addr(s, a32, opc); + + tcg_gen_qemu_ld_i64(val, addr, index, opc); + + /* Not needed for user-mode BE32, where we use MO_BE instead. */ + if (!IS_USER_ONLY && s->sctlr_b && (opc & MO_SIZE) == MO_64) { + tcg_gen_rotri_i64(val, val, 32); + } + tcg_temp_free(addr); +} + +static void gen_aa32_st_internal_i64(DisasContext *s, TCGv_i64 val, + TCGv_i32 a32, int index, MemOp opc) +{ + TCGv addr = gen_aa32_addr(s, a32, opc); + + /* Not needed for user-mode BE32, where we use MO_BE instead. */ + if (!IS_USER_ONLY && s->sctlr_b && (opc & MO_SIZE) == MO_64) { + TCGv_i64 tmp = tcg_temp_new_i64(); + tcg_gen_rotri_i64(tmp, val, 32); + tcg_gen_qemu_st_i64(tmp, addr, index, opc); + tcg_temp_free_i64(tmp); + } else { + tcg_gen_qemu_st_i64(val, addr, index, opc); + } + tcg_temp_free(addr); +} + static void gen_aa32_ld_i32(DisasContext *s, TCGv_i32 val, TCGv_i32 a32, int index, MemOp opc) { @@ -XXX,XX +XXX,XX @@ static void gen_aa32_st_i32(DisasContext *s, TCGv_i32 val, TCGv_i32 a32, gen_aa32_st_internal_i32(s, val, a32, index, finalize_memop(s, opc)); } +static void gen_aa32_ld_i64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, + int index, MemOp opc) +{ + gen_aa32_ld_internal_i64(s, val, a32, index, finalize_memop(s, opc)); +} + +static void gen_aa32_st_i64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, + int index, MemOp opc) +{ + gen_aa32_st_internal_i64(s, val, a32, index, finalize_memop(s, opc)); +} + #define DO_GEN_LD(SUFF, OPC) \ static inline void gen_aa32_ld##SUFF(DisasContext *s, TCGv_i32 val, \ TCGv_i32 a32, int index) \ @@ -XXX,XX +XXX,XX @@ static void gen_aa32_st_i32(DisasContext *s, TCGv_i32 val, TCGv_i32 a32, gen_aa32_st_i32(s, val, a32, index, OPC); \ } -static void gen_aa32_ld_i64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, - int index, MemOp opc) -{ - TCGv addr = gen_aa32_addr(s, a32, opc); - tcg_gen_qemu_ld_i64(val, addr, index, opc); - - /* Not needed for user-mode BE32, where we use MO_BE instead. */ - if (!IS_USER_ONLY && s->sctlr_b && (opc & MO_SIZE) == MO_64) { - tcg_gen_rotri_i64(val, val, 32); - } - - tcg_temp_free(addr); -} - static inline void gen_aa32_ld64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, int index) { - gen_aa32_ld_i64(s, val, a32, index, MO_Q | s->be_data); -} - -static void gen_aa32_st_i64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, - int index, MemOp opc) -{ - TCGv addr = gen_aa32_addr(s, a32, opc); - - /* Not needed for user-mode BE32, where we use MO_BE instead. */ - if (!IS_USER_ONLY && s->sctlr_b && (opc & MO_SIZE) == MO_64) { - TCGv_i64 tmp = tcg_temp_new_i64(); - tcg_gen_rotri_i64(tmp, val, 32); - tcg_gen_qemu_st_i64(tmp, addr, index, opc); - tcg_temp_free_i64(tmp); - } else { - tcg_gen_qemu_st_i64(val, addr, index, opc); - } - tcg_temp_free(addr); + gen_aa32_ld_i64(s, val, a32, index, MO_Q); } static inline void gen_aa32_st64(DisasContext *s, TCGv_i64 val, TCGv_i32 a32, int index) { - gen_aa32_st_i64(s, val, a32, index, MO_Q | s->be_data); + gen_aa32_st_i64(s, val, a32, index, MO_Q); } DO_GEN_LD(8u, MO_UB) diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_multiple(DisasContext *s, arg_VLDST_multiple *a) int tt = a->vd + reg + spacing * xs; if (a->l) { - gen_aa32_ld_i64(s, tmp64, addr, mmu_idx, endian | size); + gen_aa32_ld_internal_i64(s, tmp64, addr, mmu_idx, + endian | size); neon_store_element64(tt, n, size, tmp64); } else { neon_load_element64(tmp64, tt, n, size); - gen_aa32_st_i64(s, tmp64, addr, mmu_idx, endian | size); + gen_aa32_st_internal_i64(s, tmp64, addr, mmu_idx, + endian | size); } tcg_gen_add_i32(addr, addr, tmp); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Buglink: https://bugs.launchpad.net/qemu/+bug/1905356 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDRD_rr(DisasContext *s, arg_ldst_rr *a) addr = op_addr_rr_pre(s, a); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); store_reg(s, a->rt, tmp); tcg_gen_addi_i32(addr, addr, 4); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); store_reg(s, a->rt + 1, tmp); /* LDRD w/ base writeback is undefined if the registers overlap. */ @@ -XXX,XX +XXX,XX @@ static bool trans_STRD_rr(DisasContext *s, arg_ldst_rr *a) addr = op_addr_rr_pre(s, a); tmp = load_reg(s, a->rt); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); tcg_temp_free_i32(tmp); tcg_gen_addi_i32(addr, addr, 4); tmp = load_reg(s, a->rt + 1); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); tcg_temp_free_i32(tmp); op_addr_rr_post(s, a, addr, -4); @@ -XXX,XX +XXX,XX @@ static bool op_ldrd_ri(DisasContext *s, arg_ldst_ri *a, int rt2) addr = op_addr_ri_pre(s, a); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); store_reg(s, a->rt, tmp); tcg_gen_addi_i32(addr, addr, 4); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); store_reg(s, rt2, tmp); /* LDRD w/ base writeback is undefined if the registers overlap. */ @@ -XXX,XX +XXX,XX @@ static bool op_strd_ri(DisasContext *s, arg_ldst_ri *a, int rt2) addr = op_addr_ri_pre(s, a); tmp = load_reg(s, a->rt); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); tcg_temp_free_i32(tmp); tcg_gen_addi_i32(addr, addr, 4); tmp = load_reg(s, rt2); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); tcg_temp_free_i32(tmp); op_addr_ri_post(s, a, addr, -4); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool op_stl(DisasContext *s, arg_STL *a, MemOp mop) addr = load_reg(s, a->rn); tmp = load_reg(s, a->rt); tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); - gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), mop); + gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), mop | MO_ALIGN); disas_set_da_iss(s, mop, a->rt | ISSIsAcqRel | ISSIsWrite); tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool op_lda(DisasContext *s, arg_LDA *a, MemOp mop) addr = load_reg(s, a->rn); tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), mop); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), mop | MO_ALIGN); disas_set_da_iss(s, mop, a->rt | ISSIsAcqRel); tcg_temp_free_i32(addr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) } else { tmp = load_reg(s, i); } - gen_aa32_st32(s, tmp, addr, mem_idx); + gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); tcg_temp_free_i32(tmp); /* No need to add after the last transfer. */ @@ -XXX,XX +XXX,XX @@ static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) } tmp = tcg_temp_new_i32(); - gen_aa32_ld32u(s, tmp, addr, mem_idx); + gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); if (user) { tmp2 = tcg_const_i32(i); gen_helper_set_user_reg(cpu_env, tmp2, tmp); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_RFE(DisasContext *s, arg_RFE *a) /* Load PC into tmp and CPSR into tmp2. */ t1 = tcg_temp_new_i32(); - gen_aa32_ld32u(s, t1, addr, get_mem_index(s)); + gen_aa32_ld_i32(s, t1, addr, get_mem_index(s), MO_UL | MO_ALIGN); tcg_gen_addi_i32(addr, addr, 4); t2 = tcg_temp_new_i32(); - gen_aa32_ld32u(s, t2, addr, get_mem_index(s)); + gen_aa32_ld_i32(s, t2, addr, get_mem_index(s), MO_UL | MO_ALIGN); if (a->w) { /* Base writeback. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_srs(DisasContext *s, } tcg_gen_addi_i32(addr, addr, offset); tmp = load_reg(s, 14); - gen_aa32_st32(s, tmp, addr, get_mem_index(s)); + gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), MO_UL | MO_ALIGN); tcg_temp_free_i32(tmp); tmp = load_cpu_field(spsr); tcg_gen_addi_i32(addr, addr, 4); - gen_aa32_st32(s, tmp, addr, get_mem_index(s)); + gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), MO_UL | MO_ALIGN); tcg_temp_free_i32(tmp); if (writeback) { switch (amode) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-vfp.c.inc | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLDM_VSTM_sp(DisasContext *s, arg_VLDM_VSTM_sp *a) for (i = 0; i < n; i++) { if (a->l) { /* load */ - gen_aa32_ld32u(s, tmp, addr, get_mem_index(s)); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), MO_UL | MO_ALIGN); vfp_store_reg32(tmp, a->vd + i); } else { /* store */ vfp_load_reg32(tmp, a->vd + i); - gen_aa32_st32(s, tmp, addr, get_mem_index(s)); + gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), MO_UL | MO_ALIGN); } tcg_gen_addi_i32(addr, addr, offset); } @@ -XXX,XX +XXX,XX @@ static bool trans_VLDM_VSTM_dp(DisasContext *s, arg_VLDM_VSTM_dp *a) for (i = 0; i < n; i++) { if (a->l) { /* load */ - gen_aa32_ld64(s, tmp, addr, get_mem_index(s)); + gen_aa32_ld_i64(s, tmp, addr, get_mem_index(s), MO_Q | MO_ALIGN_4); vfp_store_reg64(tmp, a->vd + i); } else { /* store */ vfp_load_reg64(tmp, a->vd + i); - gen_aa32_st64(s, tmp, addr, get_mem_index(s)); + gen_aa32_st_i64(s, tmp, addr, get_mem_index(s), MO_Q | MO_ALIGN_4); } tcg_gen_addi_i32(addr, addr, offset); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-vfp.c.inc | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_hp(DisasContext *s, arg_VLDR_VSTR_sp *a) addr = add_reg_for_lit(s, a->rn, offset); tmp = tcg_temp_new_i32(); if (a->l) { - gen_aa32_ld16u(s, tmp, addr, get_mem_index(s)); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), MO_UW | MO_ALIGN); vfp_store_reg32(tmp, a->vd); } else { vfp_load_reg32(tmp, a->vd); - gen_aa32_st16(s, tmp, addr, get_mem_index(s)); + gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), MO_UW | MO_ALIGN); } tcg_temp_free_i32(tmp); tcg_temp_free_i32(addr); @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_sp(DisasContext *s, arg_VLDR_VSTR_sp *a) addr = add_reg_for_lit(s, a->rn, offset); tmp = tcg_temp_new_i32(); if (a->l) { - gen_aa32_ld32u(s, tmp, addr, get_mem_index(s)); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), MO_UL | MO_ALIGN); vfp_store_reg32(tmp, a->vd); } else { vfp_load_reg32(tmp, a->vd); - gen_aa32_st32(s, tmp, addr, get_mem_index(s)); + gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), MO_UL | MO_ALIGN); } tcg_temp_free_i32(tmp); tcg_temp_free_i32(addr); @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_dp(DisasContext *s, arg_VLDR_VSTR_dp *a) addr = add_reg_for_lit(s, a->rn, offset); tmp = tcg_temp_new_i64(); if (a->l) { - gen_aa32_ld64(s, tmp, addr, get_mem_index(s)); + gen_aa32_ld_i64(s, tmp, addr, get_mem_index(s), MO_Q | MO_ALIGN_4); vfp_store_reg64(tmp, a->vd); } else { vfp_load_reg64(tmp, a->vd); - gen_aa32_st64(s, tmp, addr, get_mem_index(s)); + gen_aa32_st_i64(s, tmp, addr, get_mem_index(s), MO_Q | MO_ALIGN_4); } tcg_temp_free_i64(tmp); tcg_temp_free_i32(addr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 1 + target/arm/translate.c | 15 +++++++++++++ target/arm/translate-neon.c.inc | 37 +++++++++++++++++++++++++-------- 3 files changed, 44 insertions(+), 9 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ void arm_test_cc(DisasCompare *cmp, int cc); void arm_free_cc(DisasCompare *cmp); void arm_jump_cc(DisasCompare *cmp, TCGLabel *label); void arm_gen_test_cc(int cc, TCGLabel *label); +MemOp pow2_align(unsigned i); /* Return state of Alternate Half-precision flag, caller frees result */ static inline TCGv_i32 get_ahp_flag(void) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void store_reg_from_load(DisasContext *s, int reg, TCGv_i32 var) #define IS_USER_ONLY 0 #endif +MemOp pow2_align(unsigned i) +{ + static const MemOp mop_align[] = { + 0, MO_ALIGN_2, MO_ALIGN_4, MO_ALIGN_8, MO_ALIGN_16, + /* + * FIXME: TARGET_PAGE_BITS_MIN affects TLB_FLAGS_MASK such + * that 256-bit alignment (MO_ALIGN_32) cannot be supported: + * see get_alignment_bits(). Enforce only 128-bit alignment for now. + */ + MO_ALIGN_16 + }; + g_assert(i < ARRAY_SIZE(mop_align)); + return mop_align[i]; +} + /* * Abstractions of "generate code to do a guest load/store for * AArch32", where a vaddr is always 32 bits (and is zero diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLD_all_lanes(DisasContext *s, arg_VLD_all_lanes *a) int size = a->size; int nregs = a->n + 1; TCGv_i32 addr, tmp; + MemOp mop, align; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VLD_all_lanes(DisasContext *s, arg_VLD_all_lanes *a) return false; } + align = 0; if (size == 3) { if (nregs != 4 || a->a == 0) { return false; } /* For VLD4 size == 3 a == 1 means 32 bits at 16 byte alignment */ - size = 2; - } - if (nregs == 1 && a->a == 1 && size == 0) { - return false; - } - if (nregs == 3 && a->a == 1) { - return false; + size = MO_32; + align = MO_ALIGN_16; + } else if (a->a) { + switch (nregs) { + case 1: + if (size == 0) { + return false; + } + align = MO_ALIGN; + break; + case 2: + align = pow2_align(size + 1); + break; + case 3: + return false; + case 4: + align = pow2_align(size + 2); + break; + default: + g_assert_not_reached(); + } } if (!vfp_access_check(s)) { @@ -XXX,XX +XXX,XX @@ static bool trans_VLD_all_lanes(DisasContext *s, arg_VLD_all_lanes *a) */ stride = a->t ? 2 : 1; vec_size = nregs == 1 ? stride * 8 : 8; - + mop = size | align; tmp = tcg_temp_new_i32(); addr = tcg_temp_new_i32(); load_reg_var(s, addr, a->rn); for (reg = 0; reg < nregs; reg++) { - gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), size); + gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), mop); if ((vd & 1) && vec_size == 16) { /* * We cannot write 16 bytes at once because the @@ -XXX,XX +XXX,XX @@ static bool trans_VLD_all_lanes(DisasContext *s, arg_VLD_all_lanes *a) } tcg_gen_addi_i32(addr, addr, 1 << size); vd += stride; + + /* Subsequent memory operations inherit alignment */ + mop &= ~MO_AMASK; } tcg_temp_free_i32(tmp); tcg_temp_free_i32(addr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-neon.c.inc | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_multiple(DisasContext *s, arg_VLDST_multiple *a) { /* Neon load/store multiple structures */ int nregs, interleave, spacing, reg, n; - MemOp endian = s->be_data; + MemOp mop, align, endian; int mmu_idx = get_mem_index(s); int size = a->size; TCGv_i64 tmp64; @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_multiple(DisasContext *s, arg_VLDST_multiple *a) } /* For our purposes, bytes are always little-endian. */ + endian = s->be_data; if (size == 0) { endian = MO_LE; } + + /* Enforce alignment requested by the instruction */ + if (a->align) { + align = pow2_align(a->align + 2); /* 4 ** a->align */ + } else { + align = s->align_mem ? MO_ALIGN : 0; + } + /* * Consecutive little-endian elements from a single register * can be promoted to a larger little-endian operation. */ if (interleave == 1 && endian == MO_LE) { + /* Retain any natural alignment. */ + if (align == MO_ALIGN) { + align = pow2_align(size); + } size = 3; } + tmp64 = tcg_temp_new_i64(); addr = tcg_temp_new_i32(); tmp = tcg_const_i32(1 << size); load_reg_var(s, addr, a->rn); + + mop = endian | size | align; for (reg = 0; reg < nregs; reg++) { for (n = 0; n < 8 >> size; n++) { int xs; @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_multiple(DisasContext *s, arg_VLDST_multiple *a) int tt = a->vd + reg + spacing * xs; if (a->l) { - gen_aa32_ld_internal_i64(s, tmp64, addr, mmu_idx, - endian | size); + gen_aa32_ld_internal_i64(s, tmp64, addr, mmu_idx, mop); neon_store_element64(tt, n, size, tmp64); } else { neon_load_element64(tmp64, tt, n, size); - gen_aa32_st_internal_i64(s, tmp64, addr, mmu_idx, - endian | size); + gen_aa32_st_internal_i64(s, tmp64, addr, mmu_idx, mop); } tcg_gen_add_i32(addr, addr, tmp); + + /* Subsequent memory operations inherit alignment */ + mop &= ~MO_AMASK; } } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-neon.c.inc | 48 ++++++++++++++++++++++++++++----- 1 file changed, 42 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_single(DisasContext *s, arg_VLDST_single *a) int nregs = a->n + 1; int vd = a->vd; TCGv_i32 addr, tmp; + MemOp mop; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_single(DisasContext *s, arg_VLDST_single *a) return true; } + /* Pick up SCTLR settings */ + mop = finalize_memop(s, a->size); + + if (a->align) { + MemOp align_op; + + switch (nregs) { + case 1: + /* For VLD1, use natural alignment. */ + align_op = MO_ALIGN; + break; + case 2: + /* For VLD2, use double alignment. */ + align_op = pow2_align(a->size + 1); + break; + case 4: + if (a->size == MO_32) { + /* + * For VLD4.32, align = 1 is double alignment, align = 2 is + * quad alignment; align = 3 is rejected above. + */ + align_op = pow2_align(a->size + a->align); + } else { + /* For VLD4.8 and VLD.16, we want quad alignment. */ + align_op = pow2_align(a->size + 2); + } + break; + default: + /* For VLD3, the alignment field is zero and rejected above. */ + g_assert_not_reached(); + } + + mop = (mop & ~MO_AMASK) | align_op; + } + tmp = tcg_temp_new_i32(); addr = tcg_temp_new_i32(); load_reg_var(s, addr, a->rn); - /* - * TODO: if we implemented alignment exceptions, we should check - * addr against the alignment encoded in a->align here. - */ + for (reg = 0; reg < nregs; reg++) { if (a->l) { - gen_aa32_ld_i32(s, tmp, addr, get_mem_index(s), a->size); + gen_aa32_ld_internal_i32(s, tmp, addr, get_mem_index(s), mop); neon_store_element(vd, a->reg_idx, a->size, tmp); } else { /* Store */ neon_load_element(tmp, vd, a->reg_idx, a->size); - gen_aa32_st_i32(s, tmp, addr, get_mem_index(s), a->size); + gen_aa32_st_internal_i32(s, tmp, addr, get_mem_index(s), mop); } vd += a->stride; tcg_gen_addi_i32(addr, addr, 1 << a->size); + + /* Subsequent memory operations inherit alignment */ + mop &= ~MO_AMASK; } tcg_temp_free_i32(addr); tcg_temp_free_i32(tmp); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In the case of gpr load, merge the size and is_signed arguments; otherwise, simply convert size to memop. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 78 ++++++++++++++++---------------------- 1 file changed, 33 insertions(+), 45 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_adc_CC(int sf, TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1) * Store from GPR register to memory. */ static void do_gpr_st_memidx(DisasContext *s, TCGv_i64 source, - TCGv_i64 tcg_addr, int size, int memidx, + TCGv_i64 tcg_addr, MemOp memop, int memidx, bool iss_valid, unsigned int iss_srt, bool iss_sf, bool iss_ar) { - g_assert(size <= 3); - tcg_gen_qemu_st_i64(source, tcg_addr, memidx, s->be_data + size); + memop = finalize_memop(s, memop); + tcg_gen_qemu_st_i64(source, tcg_addr, memidx, memop); if (iss_valid) { uint32_t syn; syn = syn_data_abort_with_iss(0, - size, + (memop & MO_SIZE), false, iss_srt, iss_sf, @@ -XXX,XX +XXX,XX @@ static void do_gpr_st_memidx(DisasContext *s, TCGv_i64 source, } static void do_gpr_st(DisasContext *s, TCGv_i64 source, - TCGv_i64 tcg_addr, int size, + TCGv_i64 tcg_addr, MemOp memop, bool iss_valid, unsigned int iss_srt, bool iss_sf, bool iss_ar) { - do_gpr_st_memidx(s, source, tcg_addr, size, get_mem_index(s), + do_gpr_st_memidx(s, source, tcg_addr, memop, get_mem_index(s), iss_valid, iss_srt, iss_sf, iss_ar); } /* * Load from memory to GPR register */ -static void do_gpr_ld_memidx(DisasContext *s, - TCGv_i64 dest, TCGv_i64 tcg_addr, - int size, bool is_signed, - bool extend, int memidx, +static void do_gpr_ld_memidx(DisasContext *s, TCGv_i64 dest, TCGv_i64 tcg_addr, + MemOp memop, bool extend, int memidx, bool iss_valid, unsigned int iss_srt, bool iss_sf, bool iss_ar) { - MemOp memop = s->be_data + size; - - g_assert(size <= 3); - - if (is_signed) { - memop += MO_SIGN; - } - + memop = finalize_memop(s, memop); tcg_gen_qemu_ld_i64(dest, tcg_addr, memidx, memop); - if (extend && is_signed) { - g_assert(size < 3); + if (extend && (memop & MO_SIGN)) { + g_assert((memop & MO_SIZE) <= MO_32); tcg_gen_ext32u_i64(dest, dest); } @@ -XXX,XX +XXX,XX @@ static void do_gpr_ld_memidx(DisasContext *s, uint32_t syn; syn = syn_data_abort_with_iss(0, - size, - is_signed, + (memop & MO_SIZE), + (memop & MO_SIGN) != 0, iss_srt, iss_sf, iss_ar, @@ -XXX,XX +XXX,XX @@ static void do_gpr_ld_memidx(DisasContext *s, } } -static void do_gpr_ld(DisasContext *s, - TCGv_i64 dest, TCGv_i64 tcg_addr, - int size, bool is_signed, bool extend, +static void do_gpr_ld(DisasContext *s, TCGv_i64 dest, TCGv_i64 tcg_addr, + MemOp memop, bool extend, bool iss_valid, unsigned int iss_srt, bool iss_sf, bool iss_ar) { - do_gpr_ld_memidx(s, dest, tcg_addr, size, is_signed, extend, - get_mem_index(s), + do_gpr_ld_memidx(s, dest, tcg_addr, memop, extend, get_mem_index(s), iss_valid, iss_srt, iss_sf, iss_ar); } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_excl(DisasContext *s, uint32_t insn) } clean_addr = gen_mte_check1(s, cpu_reg_sp(s, rn), false, rn != 31, size); - do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size, false, false, true, rt, + do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size, false, true, rt, disas_ldst_compute_iss_sf(size, false, 0), is_lasr); tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); return; @@ -XXX,XX +XXX,XX @@ static void disas_ld_lit(DisasContext *s, uint32_t insn) /* Only unsigned 32bit loads target 32bit registers. */ bool iss_sf = opc != 0; - do_gpr_ld(s, tcg_rt, clean_addr, size, is_signed, false, - true, rt, iss_sf, false); + do_gpr_ld(s, tcg_rt, clean_addr, size + is_signed * MO_SIGN, + false, true, rt, iss_sf, false); } tcg_temp_free_i64(clean_addr); } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_pair(DisasContext *s, uint32_t insn) /* Do not modify tcg_rt before recognizing any exception * from the second load. */ - do_gpr_ld(s, tmp, clean_addr, size, is_signed, false, - false, 0, false, false); + do_gpr_ld(s, tmp, clean_addr, size + is_signed * MO_SIGN, + false, false, 0, false, false); tcg_gen_addi_i64(clean_addr, clean_addr, 1 << size); - do_gpr_ld(s, tcg_rt2, clean_addr, size, is_signed, false, - false, 0, false, false); + do_gpr_ld(s, tcg_rt2, clean_addr, size + is_signed * MO_SIGN, + false, false, 0, false, false); tcg_gen_mov_i64(tcg_rt, tmp); tcg_temp_free_i64(tmp); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_imm9(DisasContext *s, uint32_t insn, do_gpr_st_memidx(s, tcg_rt, clean_addr, size, memidx, iss_valid, rt, iss_sf, false); } else { - do_gpr_ld_memidx(s, tcg_rt, clean_addr, size, - is_signed, is_extended, memidx, + do_gpr_ld_memidx(s, tcg_rt, clean_addr, size + is_signed * MO_SIGN, + is_extended, memidx, iss_valid, rt, iss_sf, false); } } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn, do_gpr_st(s, tcg_rt, clean_addr, size, true, rt, iss_sf, false); } else { - do_gpr_ld(s, tcg_rt, clean_addr, size, - is_signed, is_extended, - true, rt, iss_sf, false); + do_gpr_ld(s, tcg_rt, clean_addr, size + is_signed * MO_SIGN, + is_extended, true, rt, iss_sf, false); } } } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_unsigned_imm(DisasContext *s, uint32_t insn, do_gpr_st(s, tcg_rt, clean_addr, size, true, rt, iss_sf, false); } else { - do_gpr_ld(s, tcg_rt, clean_addr, size, is_signed, is_extended, - true, rt, iss_sf, false); + do_gpr_ld(s, tcg_rt, clean_addr, size + is_signed * MO_SIGN, + is_extended, true, rt, iss_sf, false); } } } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, * full load-acquire (we only need "load-acquire processor consistent"), * but we choose to implement them as full LDAQ. */ - do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size, false, false, + do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size, false, true, rt, disas_ldst_compute_iss_sf(size, false, 0), true); tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); return; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_pac(DisasContext *s, uint32_t insn, is_wback || rn != 31, size); tcg_rt = cpu_reg(s, rt); - do_gpr_ld(s, tcg_rt, clean_addr, size, /* is_signed */ false, + do_gpr_ld(s, tcg_rt, clean_addr, size, /* extend */ false, /* iss_valid */ !is_wback, /* iss_srt */ rt, /* iss_sf */ true, /* iss_ar */ false); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_ldapr_stlr(DisasContext *s, uint32_t insn) * Load-AcquirePC semantics; we implement as the slightly more * restrictive Load-Acquire. */ - do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size, is_signed, extend, - true, rt, iss_sf, true); + do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size + is_signed * MO_SIGN, + extend, true, rt, iss_sf, true); tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> For 128-bit load/store, use 16-byte alignment. This requires that we perform the two operations in the correct order so that we generate the alignment fault before modifying memory. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 42 +++++++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void do_gpr_ld(DisasContext *s, TCGv_i64 dest, TCGv_i64 tcg_addr, static void do_fp_st(DisasContext *s, int srcidx, TCGv_i64 tcg_addr, int size) { /* This writes the bottom N bits of a 128 bit wide vector to memory */ - TCGv_i64 tmp = tcg_temp_new_i64(); - tcg_gen_ld_i64(tmp, cpu_env, fp_reg_offset(s, srcidx, MO_64)); + TCGv_i64 tmplo = tcg_temp_new_i64(); + MemOp mop; + + tcg_gen_ld_i64(tmplo, cpu_env, fp_reg_offset(s, srcidx, MO_64)); + if (size < 4) { - tcg_gen_qemu_st_i64(tmp, tcg_addr, get_mem_index(s), - s->be_data + size); + mop = finalize_memop(s, size); + tcg_gen_qemu_st_i64(tmplo, tcg_addr, get_mem_index(s), mop); } else { bool be = s->be_data == MO_BE; TCGv_i64 tcg_hiaddr = tcg_temp_new_i64(); + TCGv_i64 tmphi = tcg_temp_new_i64(); + tcg_gen_ld_i64(tmphi, cpu_env, fp_reg_hi_offset(s, srcidx)); + + mop = s->be_data | MO_Q; + tcg_gen_qemu_st_i64(be ? tmphi : tmplo, tcg_addr, get_mem_index(s), + mop | (s->align_mem ? MO_ALIGN_16 : 0)); tcg_gen_addi_i64(tcg_hiaddr, tcg_addr, 8); - tcg_gen_qemu_st_i64(tmp, be ? tcg_hiaddr : tcg_addr, get_mem_index(s), - s->be_data | MO_Q); - tcg_gen_ld_i64(tmp, cpu_env, fp_reg_hi_offset(s, srcidx)); - tcg_gen_qemu_st_i64(tmp, be ? tcg_addr : tcg_hiaddr, get_mem_index(s), - s->be_data | MO_Q); + tcg_gen_qemu_st_i64(be ? tmplo : tmphi, tcg_hiaddr, + get_mem_index(s), mop); + tcg_temp_free_i64(tcg_hiaddr); + tcg_temp_free_i64(tmphi); } - tcg_temp_free_i64(tmp); + tcg_temp_free_i64(tmplo); } /* @@ -XXX,XX +XXX,XX @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size) /* This always zero-extends and writes to a full 128 bit wide vector */ TCGv_i64 tmplo = tcg_temp_new_i64(); TCGv_i64 tmphi = NULL; + MemOp mop; if (size < 4) { - MemOp memop = s->be_data + size; - tcg_gen_qemu_ld_i64(tmplo, tcg_addr, get_mem_index(s), memop); + mop = finalize_memop(s, size); + tcg_gen_qemu_ld_i64(tmplo, tcg_addr, get_mem_index(s), mop); } else { bool be = s->be_data == MO_BE; TCGv_i64 tcg_hiaddr; @@ -XXX,XX +XXX,XX @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size) tmphi = tcg_temp_new_i64(); tcg_hiaddr = tcg_temp_new_i64(); + mop = s->be_data | MO_Q; + tcg_gen_qemu_ld_i64(be ? tmphi : tmplo, tcg_addr, get_mem_index(s), + mop | (s->align_mem ? MO_ALIGN_16 : 0)); tcg_gen_addi_i64(tcg_hiaddr, tcg_addr, 8); - tcg_gen_qemu_ld_i64(tmplo, be ? tcg_hiaddr : tcg_addr, get_mem_index(s), - s->be_data | MO_Q); - tcg_gen_qemu_ld_i64(tmphi, be ? tcg_addr : tcg_hiaddr, get_mem_index(s), - s->be_data | MO_Q); + tcg_gen_qemu_ld_i64(be ? tmplo : tmphi, tcg_hiaddr, + get_mem_index(s), mop); tcg_temp_free_i64(tcg_hiaddr); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_excl(DisasContext *s, uint32_t insn) tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); clean_addr = gen_mte_check1(s, cpu_reg_sp(s, rn), true, rn != 31, size); - do_gpr_st(s, cpu_reg(s, rt), clean_addr, size, true, rt, + /* TODO: ARMv8.4-LSE SCTLR.nAA */ + do_gpr_st(s, cpu_reg(s, rt), clean_addr, size | MO_ALIGN, true, rt, disas_ldst_compute_iss_sf(size, false, 0), is_lasr); return; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_excl(DisasContext *s, uint32_t insn) } clean_addr = gen_mte_check1(s, cpu_reg_sp(s, rn), false, rn != 31, size); - do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size, false, true, rt, - disas_ldst_compute_iss_sf(size, false, 0), is_lasr); + /* TODO: ARMv8.4-LSE SCTLR.nAA */ + do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size | MO_ALIGN, false, true, + rt, disas_ldst_compute_iss_sf(size, false, 0), is_lasr); tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); return; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_ldapr_stlr(DisasContext *s, uint32_t insn) int size = extract32(insn, 30, 2); TCGv_i64 clean_addr, dirty_addr; bool is_store = false; - bool is_signed = false; bool extend = false; bool iss_sf; + MemOp mop; if (!dc_isar_feature(aa64_rcpc_8_4, s)) { unallocated_encoding(s); return; } + /* TODO: ARMv8.4-LSE SCTLR.nAA */ + mop = size | MO_ALIGN; + switch (opc) { case 0: /* STLURB */ is_store = true; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_ldapr_stlr(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } - is_signed = true; + mop |= MO_SIGN; break; case 3: /* LDAPURS* 32-bit variant */ if (size > 1) { unallocated_encoding(s); return; } - is_signed = true; + mop |= MO_SIGN; extend = true; /* zero-extend 32->64 after signed load */ break; default: g_assert_not_reached(); } - iss_sf = disas_ldst_compute_iss_sf(size, is_signed, opc); + iss_sf = disas_ldst_compute_iss_sf(size, (mop & MO_SIGN) != 0, opc); if (rn == 31) { gen_check_sp_alignment(s); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_ldapr_stlr(DisasContext *s, uint32_t insn) if (is_store) { /* Store-Release semantics */ tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); - do_gpr_st(s, cpu_reg(s, rt), clean_addr, size, true, rt, iss_sf, true); + do_gpr_st(s, cpu_reg(s, rt), clean_addr, mop, true, rt, iss_sf, true); } else { /* * Load-AcquirePC semantics; we implement as the slightly more * restrictive Load-Acquire. */ - do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size + is_signed * MO_SIGN, + do_gpr_ld(s, cpu_reg(s, rt), clean_addr, mop, extend, true, rt, iss_sf, true); tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void write_vec_element_i32(DisasContext *s, TCGv_i32 tcg_src, /* Store from vector register to memory */ static void do_vec_st(DisasContext *s, int srcidx, int element, - TCGv_i64 tcg_addr, int size, MemOp endian) + TCGv_i64 tcg_addr, MemOp mop) { TCGv_i64 tcg_tmp = tcg_temp_new_i64(); - read_vec_element(s, tcg_tmp, srcidx, element, size); - tcg_gen_qemu_st_i64(tcg_tmp, tcg_addr, get_mem_index(s), endian | size); + read_vec_element(s, tcg_tmp, srcidx, element, mop & MO_SIZE); + tcg_gen_qemu_st_i64(tcg_tmp, tcg_addr, get_mem_index(s), mop); tcg_temp_free_i64(tcg_tmp); } /* Load from memory to vector register */ static void do_vec_ld(DisasContext *s, int destidx, int element, - TCGv_i64 tcg_addr, int size, MemOp endian) + TCGv_i64 tcg_addr, MemOp mop) { TCGv_i64 tcg_tmp = tcg_temp_new_i64(); - tcg_gen_qemu_ld_i64(tcg_tmp, tcg_addr, get_mem_index(s), endian | size); - write_vec_element(s, tcg_tmp, destidx, element, size); + tcg_gen_qemu_ld_i64(tcg_tmp, tcg_addr, get_mem_index(s), mop); + write_vec_element(s, tcg_tmp, destidx, element, mop & MO_SIZE); tcg_temp_free_i64(tcg_tmp); } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) for (xs = 0; xs < selem; xs++) { int tt = (rt + r + xs) % 32; if (is_store) { - do_vec_st(s, tt, e, clean_addr, size, endian); + do_vec_st(s, tt, e, clean_addr, size | endian); } else { - do_vec_ld(s, tt, e, clean_addr, size, endian); + do_vec_ld(s, tt, e, clean_addr, size | endian); } tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) } else { /* Load/store one element per register */ if (is_load) { - do_vec_ld(s, rt, index, clean_addr, scale, s->be_data); + do_vec_ld(s, rt, index, clean_addr, scale | s->be_data); } else { - do_vec_st(s, rt, index, clean_addr, scale, s->be_data); + do_vec_st(s, rt, index, clean_addr, scale | s->be_data); } } tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) bool is_postidx = extract32(insn, 23, 1); bool is_q = extract32(insn, 30, 1); TCGv_i64 clean_addr, tcg_rn, tcg_ebytes; - MemOp endian = s->be_data; + MemOp endian, align, mop; int total; /* total bytes */ int elements; /* elements per vector */ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) } /* For our purposes, bytes are always little-endian. */ + endian = s->be_data; if (size == 0) { endian = MO_LE; } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) * Consecutive little-endian elements from a single register * can be promoted to a larger little-endian operation. */ + align = MO_ALIGN; if (selem == 1 && endian == MO_LE) { + align = pow2_align(size); size = 3; } - elements = (is_q ? 16 : 8) >> size; + if (!s->align_mem) { + align = 0; + } + mop = endian | size | align; + elements = (is_q ? 16 : 8) >> size; tcg_ebytes = tcg_const_i64(1 << size); for (r = 0; r < rpt; r++) { int e; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) for (xs = 0; xs < selem; xs++) { int tt = (rt + r + xs) % 32; if (is_store) { - do_vec_st(s, tt, e, clean_addr, size | endian); + do_vec_st(s, tt, e, clean_addr, mop); } else { - do_vec_ld(s, tt, e, clean_addr, size | endian); + do_vec_ld(s, tt, e, clean_addr, mop); } tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) int index = is_q << 3 | S << 2 | size; int xs, total; TCGv_i64 clean_addr, tcg_rn, tcg_ebytes; + MemOp mop; if (extract32(insn, 31, 1)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) clean_addr = gen_mte_checkN(s, tcg_rn, !is_load, is_postidx || rn != 31, total); + mop = finalize_memop(s, scale); tcg_ebytes = tcg_const_i64(1 << scale); for (xs = 0; xs < selem; xs++) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) /* Load and replicate to all elements */ TCGv_i64 tcg_tmp = tcg_temp_new_i64(); - tcg_gen_qemu_ld_i64(tcg_tmp, clean_addr, - get_mem_index(s), s->be_data + scale); + tcg_gen_qemu_ld_i64(tcg_tmp, clean_addr, get_mem_index(s), mop); tcg_gen_gvec_dup_i64(scale, vec_full_reg_offset(s, rt), (is_q + 1) * 8, vec_full_reg_size(s), tcg_tmp); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) } else { /* Load/store one element per register */ if (is_load) { - do_vec_ld(s, rt, index, clean_addr, scale | s->be_data); + do_vec_ld(s, rt, index, clean_addr, mop); } else { - do_vec_st(s, rt, index, clean_addr, scale | s->be_data); + do_vec_st(s, rt, index, clean_addr, mop); } } tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210419202257.161730-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a) clean_addr = gen_mte_check1(s, temp, false, true, msz); tcg_gen_qemu_ld_i64(temp, clean_addr, get_mem_index(s), - s->be_data | dtype_mop[a->dtype]); + finalize_memop(s, dtype_mop[a->dtype])); /* Broadcast to *all* elements. */ tcg_gen_gvec_dup_i64(esz, vec_full_reg_offset(s, a->rd), -- 2.20.1 From: Cornelia Huck <cohuck@redhat.com> Add 6.1 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Message-id: 20210331111900.118274-1-cohuck@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/boards.h | 3 +++ include/hw/i386/pc.h | 3 +++ hw/arm/virt.c | 7 ++++++- hw/core/machine.c | 3 +++ hw/i386/pc.c | 3 +++ hw/i386/pc_piix.c | 14 +++++++++++++- hw/i386/pc_q35.c | 13 ++++++++++++- hw/ppc/spapr.c | 17 ++++++++++++++--- hw/s390x/s390-virtio-ccw.c | 14 +++++++++++++- 9 files changed, 70 insertions(+), 7 deletions(-) diff --git a/include/hw/boards.h b/include/hw/boards.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/boards.h +++ b/include/hw/boards.h @@ -XXX,XX +XXX,XX @@ struct MachineState { } \ type_init(machine_initfn##_register_types) +extern GlobalProperty hw_compat_6_0[]; +extern const size_t hw_compat_6_0_len; + extern GlobalProperty hw_compat_5_2[]; extern const size_t hw_compat_5_2_len; diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/pc.h +++ b/include/hw/i386/pc.h @@ -XXX,XX +XXX,XX @@ bool pc_system_ovmf_table_find(const char *entry, uint8_t **data, void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, const CPUArchIdList *apic_ids, GArray *entry); +extern GlobalProperty pc_compat_6_0[]; +extern const size_t pc_compat_6_0_len; + extern GlobalProperty pc_compat_5_2[]; extern const size_t pc_compat_5_2_len; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_machine_init(void) } type_init(machvirt_machine_init); +static void virt_machine_6_1_options(MachineClass *mc) +{ +} +DEFINE_VIRT_MACHINE_AS_LATEST(6, 1) + static void virt_machine_6_0_options(MachineClass *mc) { } -DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) +DEFINE_VIRT_MACHINE(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { diff --git a/hw/core/machine.c b/hw/core/machine.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine.c +++ b/hw/core/machine.c @@ -XXX,XX +XXX,XX @@ #include "hw/virtio/virtio.h" #include "hw/virtio/virtio-pci.h" +GlobalProperty hw_compat_6_0[] = {}; +const size_t hw_compat_6_0_len = G_N_ELEMENTS(hw_compat_6_0); + GlobalProperty hw_compat_5_2[] = { { "ICH9-LPC", "smm-compat", "on"}, { "PIIX4_PM", "smm-compat", "on"}, diff --git a/hw/i386/pc.c b/hw/i386/pc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc.c +++ b/hw/i386/pc.c @@ -XXX,XX +XXX,XX @@ #include "trace.h" #include CONFIG_DEVICES +GlobalProperty pc_compat_6_0[] = {}; +const size_t pc_compat_6_0_len = G_N_ELEMENTS(pc_compat_6_0); + GlobalProperty pc_compat_5_2[] = { { "ICH9-LPC", "x-smi-cpu-hotunplug", "off" }, }; diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc_piix.c +++ b/hw/i386/pc_piix.c @@ -XXX,XX +XXX,XX @@ static void pc_i440fx_machine_options(MachineClass *m) machine_class_allow_dynamic_sysbus_dev(m, TYPE_VMBUS_BRIDGE); } -static void pc_i440fx_6_0_machine_options(MachineClass *m) +static void pc_i440fx_6_1_machine_options(MachineClass *m) { PCMachineClass *pcmc = PC_MACHINE_CLASS(m); pc_i440fx_machine_options(m); @@ -XXX,XX +XXX,XX @@ static void pc_i440fx_6_0_machine_options(MachineClass *m) pcmc->default_cpu_version = 1; } +DEFINE_I440FX_MACHINE(v6_1, "pc-i440fx-6.1", NULL, + pc_i440fx_6_1_machine_options); + +static void pc_i440fx_6_0_machine_options(MachineClass *m) +{ + pc_i440fx_6_1_machine_options(m); + m->alias = NULL; + m->is_default = false; + compat_props_add(m->compat_props, hw_compat_6_0, hw_compat_6_0_len); + compat_props_add(m->compat_props, pc_compat_6_0, pc_compat_6_0_len); +} + DEFINE_I440FX_MACHINE(v6_0, "pc-i440fx-6.0", NULL, pc_i440fx_6_0_machine_options); diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc_q35.c +++ b/hw/i386/pc_q35.c @@ -XXX,XX +XXX,XX @@ static void pc_q35_machine_options(MachineClass *m) m->max_cpus = 288; } -static void pc_q35_6_0_machine_options(MachineClass *m) +static void pc_q35_6_1_machine_options(MachineClass *m) { PCMachineClass *pcmc = PC_MACHINE_CLASS(m); pc_q35_machine_options(m); @@ -XXX,XX +XXX,XX @@ static void pc_q35_6_0_machine_options(MachineClass *m) pcmc->default_cpu_version = 1; } +DEFINE_Q35_MACHINE(v6_1, "pc-q35-6.1", NULL, + pc_q35_6_1_machine_options); + +static void pc_q35_6_0_machine_options(MachineClass *m) +{ + pc_q35_6_1_machine_options(m); + m->alias = NULL; + compat_props_add(m->compat_props, hw_compat_6_0, hw_compat_6_0_len); + compat_props_add(m->compat_props, pc_compat_6_0, pc_compat_6_0_len); +} + DEFINE_Q35_MACHINE(v6_0, "pc-q35-6.0", NULL, pc_q35_6_0_machine_options); diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr.c +++ b/hw/ppc/spapr.c @@ -XXX,XX +XXX,XX @@ static void spapr_machine_latest_class_options(MachineClass *mc) type_init(spapr_machine_register_##suffix) /* - * pseries-6.0 + * pseries-6.1 */ -static void spapr_machine_6_0_class_options(MachineClass *mc) +static void spapr_machine_6_1_class_options(MachineClass *mc) { /* Defaults for the latest behaviour inherited from the base class */ } -DEFINE_SPAPR_MACHINE(6_0, "6.0", true); +DEFINE_SPAPR_MACHINE(6_1, "6.1", true); + +/* + * pseries-6.0 + */ +static void spapr_machine_6_0_class_options(MachineClass *mc) +{ + spapr_machine_6_1_class_options(mc); + compat_props_add(mc->compat_props, hw_compat_6_0, hw_compat_6_0_len); +} + +DEFINE_SPAPR_MACHINE(6_0, "6.0", false); /* * pseries-5.2 diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-virtio-ccw.c +++ b/hw/s390x/s390-virtio-ccw.c @@ -XXX,XX +XXX,XX @@ bool css_migration_enabled(void) } \ type_init(ccw_machine_register_##suffix) +static void ccw_machine_6_1_instance_options(MachineState *machine) +{ +} + +static void ccw_machine_6_1_class_options(MachineClass *mc) +{ +} +DEFINE_CCW_MACHINE(6_1, "6.1", true); + static void ccw_machine_6_0_instance_options(MachineState *machine) { + ccw_machine_6_1_instance_options(machine); } static void ccw_machine_6_0_class_options(MachineClass *mc) { + ccw_machine_6_1_class_options(mc); + compat_props_add(mc->compat_props, hw_compat_6_0, hw_compat_6_0_len); } -DEFINE_CCW_MACHINE(6_0, "6.0", true); +DEFINE_CCW_MACHINE(6_0, "6.0", false); static void ccw_machine_5_2_instance_options(MachineState *machine) { -- 2.20.1 Currently the gpex PCI controller implements no special behaviour for guest accesses to areas of the PIO and MMIO where it has not mapped any PCI devices, which means that for Arm you end up with a CPU exception due to a data abort. Most host OSes expect "like an x86 PC" behaviour, where bad accesses like this return -1 for reads and ignore writes. In the interests of not being surprising, make host CPU accesses to these windows behave as -1/discard where there's no mapped PCI device. The old behaviour generally didn't cause any problems, because almost always the guest OS will map the PCI devices and then only access where it has mapped them. One corner case where you will see this kind of access is if Linux attempts to probe legacy ISA devices via a PIO window access. So far the only case where we've seen this has been via the syzkaller fuzzer. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20210325163315.27724-1-peter.maydell@linaro.org Fixes: https://bugs.launchpad.net/qemu/+bug/1918917 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/pci-host/gpex.h | 4 +++ hw/core/machine.c | 4 ++- hw/pci-host/gpex.c | 56 ++++++++++++++++++++++++++++++++++++-- 3 files changed, 60 insertions(+), 4 deletions(-) diff --git a/include/hw/pci-host/gpex.h b/include/hw/pci-host/gpex.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci-host/gpex.h +++ b/include/hw/pci-host/gpex.h @@ -XXX,XX +XXX,XX @@ struct GPEXHost { MemoryRegion io_ioport; MemoryRegion io_mmio; + MemoryRegion io_ioport_window; + MemoryRegion io_mmio_window; qemu_irq irq[GPEX_NUM_IRQS]; int irq_num[GPEX_NUM_IRQS]; + + bool allow_unmapped_accesses; }; struct GPEXConfig { diff --git a/hw/core/machine.c b/hw/core/machine.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine.c +++ b/hw/core/machine.c @@ -XXX,XX +XXX,XX @@ #include "hw/virtio/virtio.h" #include "hw/virtio/virtio-pci.h" -GlobalProperty hw_compat_6_0[] = {}; +GlobalProperty hw_compat_6_0[] = { + { "gpex-pcihost", "allow-unmapped-accesses", "false" }, +}; const size_t hw_compat_6_0_len = G_N_ELEMENTS(hw_compat_6_0); GlobalProperty hw_compat_5_2[] = { diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/gpex.c +++ b/hw/pci-host/gpex.c @@ -XXX,XX +XXX,XX @@ static void gpex_host_realize(DeviceState *dev, Error **errp) int i; pcie_host_mmcfg_init(pex, PCIE_MMCFG_SIZE_MAX); + sysbus_init_mmio(sbd, &pex->mmio); + + /* + * Note that the MemoryRegions io_mmio and io_ioport that we pass + * to pci_register_root_bus() are not the same as the + * MemoryRegions io_mmio_window and io_ioport_window that we + * expose as SysBus MRs. The difference is in the behaviour of + * accesses to addresses where no PCI device has been mapped. + * + * io_mmio and io_ioport are the underlying PCI view of the PCI + * address space, and when a PCI device does a bus master access + * to a bad address this is reported back to it as a transaction + * failure. + * + * io_mmio_window and io_ioport_window implement "unmapped + * addresses read as -1 and ignore writes"; this is traditional + * x86 PC behaviour, which is not mandated by the PCI spec proper + * but expected by much PCI-using guest software, including Linux. + * + * In the interests of not being unnecessarily surprising, we + * implement it in the gpex PCI host controller, by providing the + * _window MRs, which are containers with io ops that implement + * the 'background' behaviour and which hold the real PCI MRs as + * subregions. + */ memory_region_init(&s->io_mmio, OBJECT(s), "gpex_mmio", UINT64_MAX); memory_region_init(&s->io_ioport, OBJECT(s), "gpex_ioport", 64 * 1024); - sysbus_init_mmio(sbd, &pex->mmio); - sysbus_init_mmio(sbd, &s->io_mmio); - sysbus_init_mmio(sbd, &s->io_ioport); + if (s->allow_unmapped_accesses) { + memory_region_init_io(&s->io_mmio_window, OBJECT(s), + &unassigned_io_ops, OBJECT(s), + "gpex_mmio_window", UINT64_MAX); + memory_region_init_io(&s->io_ioport_window, OBJECT(s), + &unassigned_io_ops, OBJECT(s), + "gpex_ioport_window", 64 * 1024); + + memory_region_add_subregion(&s->io_mmio_window, 0, &s->io_mmio); + memory_region_add_subregion(&s->io_ioport_window, 0, &s->io_ioport); + sysbus_init_mmio(sbd, &s->io_mmio_window); + sysbus_init_mmio(sbd, &s->io_ioport_window); + } else { + sysbus_init_mmio(sbd, &s->io_mmio); + sysbus_init_mmio(sbd, &s->io_ioport); + } + for (i = 0; i < GPEX_NUM_IRQS; i++) { sysbus_init_irq(sbd, &s->irq[i]); s->irq_num[i] = -1; @@ -XXX,XX +XXX,XX @@ static const char *gpex_host_root_bus_path(PCIHostState *host_bridge, return "0000:00"; } +static Property gpex_host_properties[] = { + /* + * Permit CPU accesses to unmapped areas of the PIO and MMIO windows + * (discarding writes and returning -1 for reads) rather than aborting. + */ + DEFINE_PROP_BOOL("allow-unmapped-accesses", GPEXHost, + allow_unmapped_accesses, true), + DEFINE_PROP_END_OF_LIST(), +}; + static void gpex_host_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void gpex_host_class_init(ObjectClass *klass, void *data) dc->realize = gpex_host_realize; set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); dc->fw_name = "pci"; + device_class_set_props(dc, gpex_host_properties); } static void gpex_host_initfn(Object *obj) -- 2.20.1 First arm pullreq of the cycle; this is mostly my softfloat NaN handling series. (Lots more in my to-review queue, but I don't like pullreqs growing too close to a hundred patches at a time :-)) thanks -- PMM The following changes since commit 97f2796a3736ed37a1b85dc1c76a6c45b829dd17: Open 10.0 development tree (2024-12-10 17:41:17 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20241211 for you to fetch changes up to 1abe28d519239eea5cf9620bb13149423e5665f8: MAINTAINERS: Add correct email address for Vikram Garhwal (2024-12-11 15:31:09 +0000) ---------------------------------------------------------------- target-arm queue: * hw/net/lan9118: Extract PHY model, reuse with imx_fec, fix bugs * fpu: Make muladd NaN handling runtime-selected, not compile-time * fpu: Make default NaN pattern runtime-selected, not compile-time * fpu: Minor NaN-related cleanups * MAINTAINERS: email address updates ---------------------------------------------------------------- Bernhard Beschow (5): hw/net/lan9118: Extract lan9118_phy hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations hw/net/lan9118_phy: Fix off-by-one error in MII_ANLPAR register hw/net/lan9118_phy: Reuse MII constants hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement Leif Lindholm (1): MAINTAINERS: update email address for Leif Lindholm Peter Maydell (54): fpu: handle raising Invalid for infzero in pick_nan_muladd fpu: Check for default_nan_mode before calling pickNaNMulAdd softfloat: Allow runtime choice of inf * 0 + NaN result tests/fp: Explicitly set inf-zero-nan rule target/arm: Set FloatInfZeroNaNRule explicitly target/s390: Set FloatInfZeroNaNRule explicitly target/ppc: Set FloatInfZeroNaNRule explicitly target/mips: Set FloatInfZeroNaNRule explicitly target/sparc: Set FloatInfZeroNaNRule explicitly target/xtensa: Set FloatInfZeroNaNRule explicitly target/x86: Set FloatInfZeroNaNRule explicitly target/loongarch: Set FloatInfZeroNaNRule explicitly target/hppa: Set FloatInfZeroNaNRule explicitly softfloat: Pass have_snan to pickNaNMulAdd softfloat: Allow runtime choice of NaN propagation for muladd tests/fp: Explicitly set 3-NaN propagation rule target/arm: Set Float3NaNPropRule explicitly target/loongarch: Set Float3NaNPropRule explicitly target/ppc: Set Float3NaNPropRule explicitly target/s390x: Set Float3NaNPropRule explicitly target/sparc: Set Float3NaNPropRule explicitly target/mips: Set Float3NaNPropRule explicitly target/xtensa: Set Float3NaNPropRule explicitly target/i386: Set Float3NaNPropRule explicitly target/hppa: Set Float3NaNPropRule explicitly fpu: Remove use_first_nan field from float_status target/m68k: Don't pass NULL float_status to floatx80_default_nan() softfloat: Create floatx80 default NaN from parts64_default_nan target/loongarch: Use normal float_status in fclass_s and fclass_d helpers target/m68k: In frem helper, initialize local float_status from env->fp_status target/m68k: Init local float_status from env fp_status in gdb get/set reg target/sparc: Initialize local scratch float_status from env->fp_status target/ppc: Use env->fp_status in helper_compute_fprf functions fpu: Allow runtime choice of default NaN value tests/fp: Set default NaN pattern explicitly target/microblaze: Set default NaN pattern explicitly target/i386: Set default NaN pattern explicitly target/hppa: Set default NaN pattern explicitly target/alpha: Set default NaN pattern explicitly target/arm: Set default NaN pattern explicitly target/loongarch: Set default NaN pattern explicitly target/m68k: Set default NaN pattern explicitly target/mips: Set default NaN pattern explicitly target/openrisc: Set default NaN pattern explicitly target/ppc: Set default NaN pattern explicitly target/sh4: Set default NaN pattern explicitly target/rx: Set default NaN pattern explicitly target/s390x: Set default NaN pattern explicitly target/sparc: Set default NaN pattern explicitly target/xtensa: Set default NaN pattern explicitly target/hexagon: Set default NaN pattern explicitly target/riscv: Set default NaN pattern explicitly target/tricore: Set default NaN pattern explicitly fpu: Remove default handling for dnan_pattern Richard Henderson (11): target/arm: Copy entire float_status in is_ebf softfloat: Inline pickNaNMulAdd softfloat: Use goto for default nan case in pick_nan_muladd softfloat: Remove which from parts_pick_nan_muladd softfloat: Pad array size in pick_nan_muladd softfloat: Move propagateFloatx80NaN to softfloat.c softfloat: Use parts_pick_nan in propagateFloatx80NaN softfloat: Inline pickNaN softfloat: Share code between parts_pick_nan cases softfloat: Sink frac_cmp in parts_pick_nan until needed softfloat: Replace WHICH with RET in parts_pick_nan Vikram Garhwal (1): MAINTAINERS: Add correct email address for Vikram Garhwal MAINTAINERS | 4 +- include/fpu/softfloat-helpers.h | 38 +++- include/fpu/softfloat-types.h | 89 +++++++- include/hw/net/imx_fec.h | 9 +- include/hw/net/lan9118_phy.h | 37 ++++ include/hw/net/mii.h | 6 + target/mips/fpu_helper.h | 20 ++ target/sparc/helper.h | 4 +- fpu/softfloat.c | 19 ++ hw/net/imx_fec.c | 146 ++------------ hw/net/lan9118.c | 137 ++----------- hw/net/lan9118_phy.c | 222 ++++++++++++++++++++ linux-user/arm/nwfpe/fpa11.c | 5 + target/alpha/cpu.c | 2 + target/arm/cpu.c | 10 + target/arm/tcg/vec_helper.c | 20 +- target/hexagon/cpu.c | 2 + target/hppa/fpu_helper.c | 12 ++ target/i386/tcg/fpu_helper.c | 12 ++ target/loongarch/tcg/fpu_helper.c | 14 +- target/m68k/cpu.c | 14 +- target/m68k/fpu_helper.c | 6 +- target/m68k/helper.c | 6 +- target/microblaze/cpu.c | 2 + target/mips/msa.c | 10 + target/openrisc/cpu.c | 2 + target/ppc/cpu_init.c | 19 ++ target/ppc/fpu_helper.c | 3 +- target/riscv/cpu.c | 2 + target/rx/cpu.c | 2 + target/s390x/cpu.c | 5 + target/sh4/cpu.c | 2 + target/sparc/cpu.c | 6 + target/sparc/fop_helper.c | 8 +- target/sparc/translate.c | 4 +- target/tricore/helper.c | 2 + target/xtensa/cpu.c | 4 + target/xtensa/fpu_helper.c | 3 +- tests/fp/fp-bench.c | 7 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 7 + fpu/softfloat-parts.c.inc | 152 +++++++++++--- fpu/softfloat-specialize.c.inc | 412 ++------------------------------------ .mailmap | 5 +- hw/net/Kconfig | 5 + hw/net/meson.build | 1 + hw/net/trace-events | 10 +- 47 files changed, 778 insertions(+), 730 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c From: Bernhard Beschow <shentey@gmail.com> A very similar implementation of the same device exists in imx_fec. Prepare for a common implementation by extracting a device model into its own files. Some migration state has been moved into the new device model which breaks migration compatibility for the following machines: * smdkc210 * realview-* * vexpress-* * kzm * mps2-* While breaking migration ABI, fix the size of the MII registers to be 16 bit, as defined by IEEE 802.3u. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118_phy.h | 37 ++++++++ hw/net/lan9118.c | 137 +++++----------------------- hw/net/lan9118_phy.c | 169 +++++++++++++++++++++++++++++++++++ hw/net/Kconfig | 4 + hw/net/meson.build | 1 + 5 files changed, 233 insertions(+), 115 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c diff --git a/include/hw/net/lan9118_phy.h b/include/hw/net/lan9118_phy.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118_phy.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_PHY_H +#define HW_NET_LAN9118_PHY_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +#define TYPE_LAN9118_PHY "lan9118-phy" +OBJECT_DECLARE_SIMPLE_TYPE(Lan9118PhyState, LAN9118_PHY) + +typedef struct Lan9118PhyState { + SysBusDevice parent_obj; + + uint16_t status; + uint16_t control; + uint16_t advertise; + uint16_t ints; + uint16_t int_mask; + qemu_irq irq; + bool link_down; +} Lan9118PhyState; + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down); +void lan9118_phy_reset(Lan9118PhyState *s); +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg); +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val); + +#endif diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "net/net.h" #include "net/eth.h" #include "hw/irq.h" +#include "hw/net/lan9118_phy.h" #include "hw/net/lan9118.h" #include "hw/ptimer.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0) #define MAC_CR_RXEN 0x00000004 #define MAC_CR_RESERVED 0x7f404213 -#define PHY_INT_ENERGYON 0x80 -#define PHY_INT_AUTONEG_COMPLETE 0x40 -#define PHY_INT_FAULT 0x20 -#define PHY_INT_DOWN 0x10 -#define PHY_INT_AUTONEG_LP 0x08 -#define PHY_INT_PARFAULT 0x04 -#define PHY_INT_AUTONEG_PAGE 0x02 - #define GPT_TIMER_EN 0x20000000 /* @@ -XXX,XX +XXX,XX @@ struct lan9118_state { uint32_t mac_mii_data; uint32_t mac_flow; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; int32_t eeprom_writable; uint8_t eeprom[128]; @@ -XXX,XX +XXX,XX @@ struct lan9118_state { static const VMStateDescription vmstate_lan9118 = { .name = "lan9118", - .version_id = 2, - .minimum_version_id = 1, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_PTIMER(timer, lan9118_state), VMSTATE_UINT32(irq_cfg, lan9118_state), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118 = { VMSTATE_UINT32(mac_mii_acc, lan9118_state), VMSTATE_UINT32(mac_mii_data, lan9118_state), VMSTATE_UINT32(mac_flow, lan9118_state), - VMSTATE_UINT32(phy_status, lan9118_state), - VMSTATE_UINT32(phy_control, lan9118_state), - VMSTATE_UINT32(phy_advertise, lan9118_state), - VMSTATE_UINT32(phy_int, lan9118_state), - VMSTATE_UINT32(phy_int_mask, lan9118_state), VMSTATE_INT32(eeprom_writable, lan9118_state), VMSTATE_UINT8_ARRAY(eeprom, lan9118_state, 128), VMSTATE_INT32(tx_fifo_size, lan9118_state), @@ -XXX,XX +XXX,XX @@ static void lan9118_reload_eeprom(lan9118_state *s) lan9118_mac_changed(s); } -static void phy_update_irq(lan9118_state *s) +static void lan9118_update_irq(void *opaque, int n, int level) { - if (s->phy_int & s->phy_int_mask) { + lan9118_state *s = opaque; + + if (level) { s->int_sts |= PHY_INT; } else { s->int_sts &= ~PHY_INT; @@ -XXX,XX +XXX,XX @@ static void phy_update_irq(lan9118_state *s) lan9118_update(s); } -static void phy_update_link(lan9118_state *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - phy_update_irq(s); -} - static void lan9118_set_link(NetClientState *nc) { - phy_update_link(qemu_get_nic_opaque(nc)); -} - -static void phy_reset(lan9118_state *s) -{ - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - phy_update_link(s); + lan9118_phy_update_link(&LAN9118(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static void lan9118_reset(DeviceState *d) @@ -XXX,XX +XXX,XX @@ static void lan9118_reset(DeviceState *d) s->read_word_n = 0; s->write_word_n = 0; - phy_reset(s); - s->eeprom_writable = 0; lan9118_reload_eeprom(s); } @@ -XXX,XX +XXX,XX @@ static void do_tx_packet(lan9118_state *s) uint32_t status; /* FIXME: Honor TX disable, and allow queueing of packets. */ - if (s->phy_control & 0x4000) { + if (s->mii.control & 0x4000) { /* This assumes the receive routine doesn't touch the VLANClient. */ qemu_receive_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len); } else { @@ -XXX,XX +XXX,XX @@ static void tx_fifo_push(lan9118_state *s, uint32_t val) } } -static uint32_t do_phy_read(lan9118_state *s, int reg) -{ - uint32_t val; - - switch (reg) { - case 0: /* Basic Control */ - return s->phy_control; - case 1: /* Basic Status */ - return s->phy_status; - case 2: /* ID1 */ - return 0x0007; - case 3: /* ID2 */ - return 0xc0d1; - case 4: /* Auto-neg advertisement */ - return s->phy_advertise; - case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; - case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - phy_update_irq(s); - return val; - case 30: /* Interrupt mask */ - return s->phy_int_mask; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_read: PHY read reg %d\n", reg); - return 0; - } -} - -static void do_phy_write(lan9118_state *s, int reg, uint32_t val) -{ - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - phy_reset(s); - break; - } - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - /* TODO 17, 18, 27, 31 */ - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - phy_update_irq(s); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_write: PHY write reg %d = 0x%04x\n", reg, val); - } -} - static void do_mac_write(lan9118_state *s, int reg, uint32_t val) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static void do_mac_write(lan9118_state *s, int reg, uint32_t val) if (val & 2) { DPRINTF("PHY write %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); - do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data); + lan9118_phy_write(&s->mii, (val >> 6) & 0x1f, s->mac_mii_data); } else { - s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f); + s->mac_mii_data = lan9118_phy_read(&s->mii, (val >> 6) & 0x1f); DPRINTF("PHY read %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); } @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, break; case CSR_PMT_CTRL: if (val & 0x400) { - phy_reset(s); + lan9118_phy_reset(&s->mii); } s->pmt_ctrl &= ~0x34e; s->pmt_ctrl |= (val & 0x34e); @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) const MemoryRegionOps *mem_ops = s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops; + qemu_init_irq(&s->mii_irq, lan9118_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + memory_region_init_io(&s->mmio, OBJECT(dev), mem_ops, s, "lan9118-mmio", 0x100); sysbus_init_mmio(sbd, &s->mmio); diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This code is licensed under the GNU GPL v2 + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" +#include "hw/resettable.h" +#include "migration/vmstate.h" +#include "qemu/log.h" + +#define PHY_INT_ENERGYON (1 << 7) +#define PHY_INT_AUTONEG_COMPLETE (1 << 6) +#define PHY_INT_FAULT (1 << 5) +#define PHY_INT_DOWN (1 << 4) +#define PHY_INT_AUTONEG_LP (1 << 3) +#define PHY_INT_PARFAULT (1 << 2) +#define PHY_INT_AUTONEG_PAGE (1 << 1) + +static void lan9118_phy_update_irq(Lan9118PhyState *s) +{ + qemu_set_irq(s->irq, !!(s->ints & s->int_mask)); +} + +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) +{ + uint16_t val; + + switch (reg) { + case 0: /* Basic Control */ + return s->control; + case 1: /* Basic Status */ + return s->status; + case 2: /* ID1 */ + return 0x0007; + case 3: /* ID2 */ + return 0xc0d1; + case 4: /* Auto-neg advertisement */ + return s->advertise; + case 5: /* Auto-neg Link Partner Ability */ + return 0x0f71; + case 6: /* Auto-neg Expansion */ + return 1; + /* TODO 17, 18, 27, 29, 30, 31 */ + case 29: /* Interrupt source. */ + val = s->ints; + s->ints = 0; + lan9118_phy_update_irq(s); + return val; + case 30: /* Interrupt mask */ + return s->int_mask; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_read: PHY read reg %d\n", reg); + return 0; + } +} + +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) +{ + switch (reg) { + case 0: /* Basic Control */ + if (val & 0x8000) { + lan9118_phy_reset(s); + break; + } + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } + break; + case 4: /* Auto-neg advertisement */ + s->advertise = (val & 0x2d7f) | 0x80; + break; + /* TODO 17, 18, 27, 31 */ + case 30: /* Interrupt mask */ + s->int_mask = val & 0xff; + lan9118_phy_update_irq(s); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + } +} + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) +{ + s->link_down = link_down; + + /* Autonegotiation status mirrors link status. */ + if (link_down) { + s->status &= ~0x0024; + s->ints |= PHY_INT_DOWN; + } else { + s->status |= 0x0024; + s->ints |= PHY_INT_ENERGYON; + s->ints |= PHY_INT_AUTONEG_COMPLETE; + } + lan9118_phy_update_irq(s); +} + +void lan9118_phy_reset(Lan9118PhyState *s) +{ + s->control = 0x3000; + s->status = 0x7809; + s->advertise = 0x01e1; + s->int_mask = 0; + s->ints = 0; + lan9118_phy_update_link(s, s->link_down); +} + +static void lan9118_phy_reset_hold(Object *obj, ResetType type) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + lan9118_phy_reset(s); +} + +static void lan9118_phy_init(Object *obj) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + qdev_init_gpio_out(DEVICE(s), &s->irq, 1); +} + +static const VMStateDescription vmstate_lan9118_phy = { + .name = "lan9118-phy", + .version_id = 1, + .minimum_version_id = 1, + .fields = (const VMStateField[]) { + VMSTATE_UINT16(control, Lan9118PhyState), + VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(advertise, Lan9118PhyState), + VMSTATE_UINT16(ints, Lan9118PhyState), + VMSTATE_UINT16(int_mask, Lan9118PhyState), + VMSTATE_BOOL(link_down, Lan9118PhyState), + VMSTATE_END_OF_LIST() + } +}; + +static void lan9118_phy_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + rc->phases.hold = lan9118_phy_reset_hold; + dc->vmsd = &vmstate_lan9118_phy; +} + +static const TypeInfo types[] = { + { + .name = TYPE_LAN9118_PHY, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Lan9118PhyState), + .instance_init = lan9118_phy_init, + .class_init = lan9118_phy_class_init, + } +}; + +DEFINE_TYPES(types) diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config VMXNET3_PCI config SMC91C111 bool +config LAN9118_PHY + bool + config LAN9118 bool + select LAN9118_PHY select PTIMER config NE2000_ISA diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_VMXNET3_PCI', if_true: files('vmxnet3.c')) system_ss.add(when: 'CONFIG_SMC91C111', if_true: files('smc91c111.c')) system_ss.add(when: 'CONFIG_LAN9118', if_true: files('lan9118.c')) +system_ss.add(when: 'CONFIG_LAN9118_PHY', if_true: files('lan9118_phy.c')) system_ss.add(when: 'CONFIG_NE2000_ISA', if_true: files('ne2000-isa.c')) system_ss.add(when: 'CONFIG_OPENCORES_ETH', if_true: files('opencores_eth.c')) system_ss.add(when: 'CONFIG_XGMAC', if_true: files('xgmac.c')) -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> imx_fec models the same PHY as lan9118_phy. The code is almost the same with imx_fec having more logging and tracing. Merge these improvements into lan9118_phy and reuse in imx_fec to fix the code duplication. Some migration state how resides in the new device model which breaks migration compatibility for the following machines: * imx25-pdk * sabrelite * mcimx7d-sabre * mcimx6ul-evk Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-3-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 9 ++- hw/net/imx_fec.c | 146 ++++----------------------------------- hw/net/lan9118_phy.c | 82 ++++++++++++++++------ hw/net/Kconfig | 1 + hw/net/trace-events | 10 +-- 5 files changed, 85 insertions(+), 163 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXFECState, IMX_FEC) #define TYPE_IMX_ENET "imx.enet" #include "hw/sysbus.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" #include "net/net.h" #define ENET_EIR 1 @@ -XXX,XX +XXX,XX @@ struct IMXFECState { uint32_t tx_descriptor[ENET_TX_RING_NUM]; uint32_t tx_ring_num; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; uint32_t phy_num; bool phy_connected; struct IMXFECState *phy_consumer; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth_txdescs = { static const VMStateDescription vmstate_imx_eth = { .name = TYPE_IMX_FEC, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX), VMSTATE_UINT32(rx_descriptor, IMXFECState), VMSTATE_UINT32(tx_descriptor[0], IMXFECState), - VMSTATE_UINT32(phy_status, IMXFECState), - VMSTATE_UINT32(phy_control, IMXFECState), - VMSTATE_UINT32(phy_advertise, IMXFECState), - VMSTATE_UINT32(phy_int, IMXFECState), - VMSTATE_UINT32(phy_int_mask, IMXFECState), VMSTATE_END_OF_LIST() }, .subsections = (const VMStateDescription * const []) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth = { }, }; -#define PHY_INT_ENERGYON (1 << 7) -#define PHY_INT_AUTONEG_COMPLETE (1 << 6) -#define PHY_INT_FAULT (1 << 5) -#define PHY_INT_DOWN (1 << 4) -#define PHY_INT_AUTONEG_LP (1 << 3) -#define PHY_INT_PARFAULT (1 << 2) -#define PHY_INT_AUTONEG_PAGE (1 << 1) - static void imx_eth_update(IMXFECState *s); /* @@ -XXX,XX +XXX,XX @@ static void imx_eth_update(IMXFECState *s); * For now we don't handle any GPIO/interrupt line, so the OS will * have to poll for the PHY status. */ -static void imx_phy_update_irq(IMXFECState *s) +static void imx_phy_update_irq(void *opaque, int n, int level) { - imx_eth_update(s); -} - -static void imx_phy_update_link(IMXFECState *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - trace_imx_phy_update_link("down"); - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - trace_imx_phy_update_link("up"); - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - imx_phy_update_irq(s); + imx_eth_update(opaque); } static void imx_eth_set_link(NetClientState *nc) { - imx_phy_update_link(IMX_FEC(qemu_get_nic_opaque(nc))); -} - -static void imx_phy_reset(IMXFECState *s) -{ - trace_imx_phy_reset(); - - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - imx_phy_update_link(s); + lan9118_phy_update_link(&IMX_FEC(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static uint32_t imx_phy_read(IMXFECState *s, int reg) { - uint32_t val; uint32_t phy = reg / 32; if (!s->phy_connected) { @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) reg %= 32; - switch (reg) { - case 0: /* Basic Control */ - val = s->phy_control; - break; - case 1: /* Basic Status */ - val = s->phy_status; - break; - case 2: /* ID1 */ - val = 0x0007; - break; - case 3: /* ID2 */ - val = 0xc0d1; - break; - case 4: /* Auto-neg advertisement */ - val = s->phy_advertise; - break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; - break; - case 6: /* Auto-neg Expansion */ - val = 1; - break; - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - imx_phy_update_irq(s); - break; - case 30: /* Interrupt mask */ - val = s->phy_int_mask; - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy]%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - } - - trace_imx_phy_read(val, phy, reg); - - return val; + return lan9118_phy_read(&s->mii, reg); } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) @@ -XXX,XX +XXX,XX @@ static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) reg %= 32; - trace_imx_phy_write(val, phy, reg); - - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - imx_phy_reset(s); - } else { - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - imx_phy_update_irq(s); - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy)%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - break; - } + lan9118_phy_write(&s->mii, reg, val); } static void imx_fec_read_bd(IMXFECBufDesc *bd, dma_addr_t addr) @@ -XXX,XX +XXX,XX @@ static void imx_eth_reset(DeviceState *d) s->rx_descriptor = 0; memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor)); - - /* We also reset the PHY */ - imx_phy_reset(s); } static uint32_t imx_default_read(IMXFECState *s, uint32_t index) @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq[0]); sysbus_init_irq(sbd, &s->irq[1]); + qemu_init_irq(&s->mii_irq, imx_phy_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + qemu_macaddr_default_if_unset(&s->conf.macaddr); s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf, diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ * Copyright (c) 2009 CodeSourcery, LLC. * Written by Paul Brook * + * Copyright (c) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net> + * * This code is licensed under the GNU GPL v2 * * Contributions after 2012-01-13 are licensed under the terms of the @@ -XXX,XX +XXX,XX @@ #include "hw/resettable.h" #include "migration/vmstate.h" #include "qemu/log.h" +#include "trace.h" #define PHY_INT_ENERGYON (1 << 7) #define PHY_INT_AUTONEG_COMPLETE (1 << 6) @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) switch (reg) { case 0: /* Basic Control */ - return s->control; + val = s->control; + break; case 1: /* Basic Status */ - return s->status; + val = s->status; + break; case 2: /* ID1 */ - return 0x0007; + val = 0x0007; + break; case 3: /* ID2 */ - return 0xc0d1; + val = 0xc0d1; + break; case 4: /* Auto-neg advertisement */ - return s->advertise; + val = s->advertise; + break; case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; + val = 0x0f71; + break; case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ + val = 1; + break; case 29: /* Interrupt source. */ val = s->ints; s->ints = 0; lan9118_phy_update_irq(s); - return val; + break; case 30: /* Interrupt mask */ - return s->int_mask; + val = s->int_mask; + break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + val = 0; + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_read: PHY read reg %d\n", reg); - return 0; + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + val = 0; + break; } + + trace_lan9118_phy_read(val, reg); + + return val; } void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) { + trace_lan9118_phy_write(val, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { lan9118_phy_reset(s); - break; - } - s->control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + } else { + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } } break; case 4: /* Auto-neg advertisement */ s->advertise = (val & 0x2d7f) | 0x80; break; - /* TODO 17, 18, 27, 31 */ case 30: /* Interrupt mask */ s->int_mask = val & 0xff; lan9118_phy_update_irq(s); break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + break; } } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { + trace_lan9118_phy_update_link("down"); s->status &= ~0x0024; s->ints |= PHY_INT_DOWN; } else { + trace_lan9118_phy_update_link("up"); s->status |= 0x0024; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) void lan9118_phy_reset(Lan9118PhyState *s) { + trace_lan9118_phy_reset(); + s->control = 0x3000; s->status = 0x7809; s->advertise = 0x01e1; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_phy = { .version_id = 1, .minimum_version_id = 1, .fields = (const VMStateField[]) { - VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(advertise, Lan9118PhyState), VMSTATE_UINT16(ints, Lan9118PhyState), VMSTATE_UINT16(int_mask, Lan9118PhyState), diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_SUN8I_EMAC config IMX_FEC bool + select LAN9118_PHY config CADENCE bool diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 +# lan9118_phy.c +lan9118_phy_read(uint16_t val, int reg) "[0x%02x] -> 0x%04" PRIx16 +lan9118_phy_write(uint16_t val, int reg) "[0x%02x] <- 0x%04" PRIx16 +lan9118_phy_update_link(const char *s) "%s" +lan9118_phy_reset(void) "" + # lance.c lance_mem_readw(uint64_t addr, uint32_t ret) "addr=0x%"PRIx64"val=0x%04x" lance_mem_writew(uint64_t addr, uint32_t val) "addr=0x%"PRIx64"val=0x%04x" @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" imx_phy_read_num(int phy, int configured) "read request from unconfigured phy %d (configured %d)" -imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_write_num(int phy, int configured) "write request to unconfigured phy %d (configured %d)" -imx_phy_update_link(const char *s) "%s" -imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" imx_enet_read_bd(uint64_t addr, int flags, int len, int data, int options, int status) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x option 0x%04x status 0x%04x" imx_eth_tx_bd_busy(void) "tx_bd ran out of descriptors to transmit" -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Turns 0x70 into 0xe0 (== 0x70 << 1) which adds the missing MII_ANLPAR_TX and fixes the MSB of selector field to be zero, as specified in the datasheet. Fixes: 2a424990170b "LAN9118 emulation" Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-4-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) val = s->advertise; break; case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; + val = 0x0fe1; break; case 6: /* Auto-neg Expansion */ val = 1; -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Prefer named constants over magic values for better readability. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-5-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/mii.h | 6 +++++ hw/net/lan9118_phy.c | 63 ++++++++++++++++++++++++++++---------------- 2 files changed, 46 insertions(+), 23 deletions(-) diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/mii.h +++ b/include/hw/net/mii.h @@ -XXX,XX +XXX,XX @@ #define MII_BMSR_JABBER (1 << 1) /* Jabber detected */ #define MII_BMSR_EXTCAP (1 << 0) /* Ext-reg capability */ +#define MII_ANAR_RFAULT (1 << 13) /* Say we can detect faults */ #define MII_ANAR_PAUSE_ASYM (1 << 11) /* Try for asymmetric pause */ #define MII_ANAR_PAUSE (1 << 10) /* Try for pause */ #define MII_ANAR_TXFD (1 << 8) @@ -XXX,XX +XXX,XX @@ #define MII_ANAR_10FD (1 << 6) #define MII_ANAR_10 (1 << 5) #define MII_ANAR_CSMACD (1 << 0) +#define MII_ANAR_SELECT (0x001f) /* Selector bits */ #define MII_ANLPAR_ACK (1 << 14) #define MII_ANLPAR_PAUSEASY (1 << 11) /* can pause asymmetrically */ @@ -XXX,XX +XXX,XX @@ #define RTL8201CP_PHYID1 0x0000 #define RTL8201CP_PHYID2 0x8201 +/* SMSC LAN9118 */ +#define SMSCLAN9118_PHYID1 0x0007 +#define SMSCLAN9118_PHYID2 0xc0d1 + /* RealTek 8211E */ #define RTL8211E_PHYID1 0x001c #define RTL8211E_PHYID2 0xc915 diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/net/lan9118_phy.h" +#include "hw/net/mii.h" #include "hw/irq.h" #include "hw/resettable.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) uint16_t val; switch (reg) { - case 0: /* Basic Control */ + case MII_BMCR: val = s->control; break; - case 1: /* Basic Status */ + case MII_BMSR: val = s->status; break; - case 2: /* ID1 */ - val = 0x0007; + case MII_PHYID1: + val = SMSCLAN9118_PHYID1; break; - case 3: /* ID2 */ - val = 0xc0d1; + case MII_PHYID2: + val = SMSCLAN9118_PHYID2; break; - case 4: /* Auto-neg advertisement */ + case MII_ANAR: val = s->advertise; break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0fe1; + case MII_ANLPAR: + val = MII_ANLPAR_PAUSEASY | MII_ANLPAR_PAUSE | MII_ANLPAR_T4 | + MII_ANLPAR_TXFD | MII_ANLPAR_TX | MII_ANLPAR_10FD | + MII_ANLPAR_10 | MII_ANLPAR_CSMACD; break; - case 6: /* Auto-neg Expansion */ - val = 1; + case MII_ANER: + val = MII_ANER_NWAY; break; case 29: /* Interrupt source. */ val = s->ints; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) trace_lan9118_phy_write(val, reg); switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { + case MII_BMCR: + if (val & MII_BMCR_RESET) { lan9118_phy_reset(s); } else { - s->control = val & 0x7980; + s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 | + MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD | + MII_BMCR_CTST); /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + if (val & MII_BMCR_AUTOEN) { + s->status |= MII_BMSR_AN_COMP; } } break; - case 4: /* Auto-neg advertisement */ - s->advertise = (val & 0x2d7f) | 0x80; + case MII_ANAR: + s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | + MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | + MII_ANAR_SELECT)) + | MII_ANAR_TX; break; case 30: /* Interrupt mask */ s->int_mask = val & 0xff; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { trace_lan9118_phy_update_link("down"); - s->status &= ~0x0024; + s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST); s->ints |= PHY_INT_DOWN; } else { trace_lan9118_phy_update_link("up"); - s->status |= 0x0024; + s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_reset(Lan9118PhyState *s) { trace_lan9118_phy_reset(); - s->control = 0x3000; - s->status = 0x7809; - s->advertise = 0x01e1; + s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100; + s->status = MII_BMSR_100TX_FD + | MII_BMSR_100TX_HD + | MII_BMSR_10T_FD + | MII_BMSR_10T_HD + | MII_BMSR_AUTONEG + | MII_BMSR_EXTCAP; + s->advertise = MII_ANAR_TXFD + | MII_ANAR_TX + | MII_ANAR_10FD + | MII_ANAR_10 + | MII_ANAR_CSMACD; s->int_mask = 0; s->ints = 0; lan9118_phy_update_link(s, s->link_down); -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> The real device advertises this mode and the device model already advertises 100 mbps half duplex and 10 mbps full+half duplex. So advertise this mode to make the model more realistic. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-6-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) break; case MII_ANAR: s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | - MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | - MII_ANAR_SELECT)) + MII_ANAR_PAUSE | MII_ANAR_TXFD | MII_ANAR_10FD | + MII_ANAR_10 | MII_ANAR_SELECT)) | MII_ANAR_TX; break; case 30: /* Interrupt mask */ -- 2.34.1 For IEEE fused multiply-add, the (0 * inf) + NaN case should raise Invalid for the multiplication of 0 by infinity. Currently we handle this in the per-architecture ifdef ladder in pickNaNMulAdd(). However, since this isn't really architecture specific we can hoist it up to the generic code. For the cases where the infzero test in pickNaNMulAdd was returning 2, we can delete the check entirely and allow the code to fall into the normal pick-a-NaN handling, because this will return 2 anyway (input 'c' being the only NaN in this case). For the cases where infzero was returning 3 to indicate "return the default NaN", we must retain that "return 3". For Arm, this looks like it might be a behaviour change because we used to set float_flag_invalid | float_flag_invalid_imz only if C is a quiet NaN. However, it is not, because Arm target code never looks at float_flag_invalid_imz, and for the (0 * inf) + SNaN case we already raised float_flag_invalid via the "abc_mask & float_cmask_snan" check in pick_nan_muladd. For any target architecture using the "default implementation" at the bottom of the ifdef, this is a behaviour change but will be fixing a bug (where we failed to raise the Invalid exception for (0 * inf + QNaN). The architectures using the default case are: * hppa * i386 * sh4 * tricore The x86, Tricore and SH4 CPU architecture manuals are clear that this should have raised Invalid; HPPA is a bit vaguer but still seems clear enough. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-2-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 13 +++++++------ fpu/softfloat-specialize.c.inc | 29 +---------------------------- 2 files changed, 8 insertions(+), 34 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, int ab_mask, int abc_mask) { int which; + bool infzero = (ab_mask == float_cmask_infzero); if (unlikely(abc_mask & float_cmask_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, - ab_mask == float_cmask_infzero, s); + if (infzero) { + /* This is (0 * inf) + NaN or (inf * 0) + NaN */ + float_raise(float_flag_invalid | float_flag_invalid_imz, s); + } + + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); if (s->default_nan_mode || which == 3) { - /* - * Note that this check is after pickNaNMulAdd so that function - * has an opportunity to set the Invalid flag for infzero. - */ parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * the default NaN */ if (infzero && is_qnan(c_cls)) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * case sets InvalidOp and returns the default NaN */ if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } /* Prefer sNaN over qNaN, in the a, b, c order. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } + /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * to return an input NaN if we have one (ie c) rather than generating * a default NaN */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_RISCV) - /* For RISC-V, InvalidOp is set when multiplicands are Inf and zero */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - } return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } #elif defined(TARGET_SPARC) - /* For (inf,0,nan) return c. */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer SNaN over QNaN, order C, B, A. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns * an input NaN if we have one (ie c). */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } if (status->use_first_nan) { if (is_nan(a_cls)) { return 0; -- 2.34.1 If the target sets default_nan_mode then we're always going to return the default NaN, and pickNaNMulAdd() no longer has any side effects. For consistency with pickNaN(), check for default_nan_mode before calling pickNaNMulAdd(). When we convert pickNaNMulAdd() to allow runtime selection of the NaN propagation rule, this means we won't have to make the targets which use default_nan_mode also set a propagation rule. Since RiscV always uses default_nan_mode, this allows us to remove its ifdef case from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-3-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 8 ++++++-- fpu/softfloat-specialize.c.inc | 9 +++++++-- 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, float_raise(float_flag_invalid | float_flag_invalid_imz, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + if (s->default_nan_mode) { + which = 3; + } else { + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + } - if (s->default_nan_mode || which == 3) { + if (which == 3) { parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ + assert(!status->default_nan_mode); #if defined(TARGET_ARM) /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns * the default NaN @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { return 1; } -#elif defined(TARGET_RISCV) - return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { return 3; -- 2.34.1 IEEE 758 does not define a fixed rule for what NaN to return in the case of a fused multiply-add of inf * 0 + NaN. Different architectures thus do different things: * some return the default NaN * some return the input NaN * Arm returns the default NaN if the input NaN is quiet, and the input NaN if it is signalling We want to make this logic be runtime selected rather than hardcoded into the binary, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. Note that four architectures both use the muladd softfloat functions and did not have a branch of the ifdef ladder to specify their behaviour (and so were ending up with the "default" case, probably wrongly): i386, HPPA, SH4 and Tricore. SH4 and Tricore both set default_nan_mode, and so will never get into pickNaNMulAdd(). For HPPA and i386 we retain the same behaviour as the old default-case, which is to not ever return the default NaN. This might not be correct but it is not a behaviour change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-4-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 ++++ include/fpu/softfloat-types.h | 23 +++++++++ fpu/softfloat-specialize.c.inc | 91 ++++++++++++++++++++++----------- 3 files changed, 95 insertions(+), 30 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, + float_status *status) +{ + status->float_infzeronan_rule = rule; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) +{ + return status->float_infzeronan_rule; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * Rule for result of fused multiply-add 0 * Inf + NaN. + * This must be a NaN, but implementations differ on whether this + * is the input NaN or the default NaN. + * + * You don't need to set this if default_nan_mode is enabled. + * When not in default-NaN mode, it is an error for the target + * not to set the rule in float_status if it uses muladd, and we + * will assert if we need to handle an input NaN and no rule was + * selected. + */ +typedef enum __attribute__((__packed__)) { + /* No propagation rule specified */ + float_infzeronan_none = 0, + /* Result is never the default NaN (so always the input NaN) */ + float_infzeronan_dnan_never, + /* Result is always the default NaN */ + float_infzeronan_dnan_always, + /* Result is the default NaN if the input NaN is quiet */ + float_infzeronan_dnan_if_qnan, +} FloatInfZeroNaNRule; + /* * Floating Point Status. Individual architectures may maintain * several versions of float_status for different functions. The @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ bool flush_to_zero; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + FloatInfZeroNaNRule rule = status->float_infzeronan_rule; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * specify. */ assert(!status->default_nan_mode); + + if (rule == float_infzeronan_none) { + /* + * Temporarily fall back to ifdef ladder + */ #if defined(TARGET_ARM) - /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns - * the default NaN - */ - if (infzero && is_qnan(c_cls)) { - return 3; + /* + * For ARM, the (inf,zero,qnan) case returns the default NaN, + * but (inf,zero,snan) returns the input NaN. + */ + rule = float_infzeronan_dnan_if_qnan; +#elif defined(TARGET_MIPS) + if (snan_bit_is_one(status)) { + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN + */ + rule = float_infzeronan_dnan_always; + } else { + /* + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + rule = float_infzeronan_dnan_never; + } +#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ + defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ + defined(TARGET_I386) || defined(TARGET_LOONGARCH) + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + rule = float_infzeronan_dnan_never; +#elif defined(TARGET_S390X) + rule = float_infzeronan_dnan_always; +#endif } + if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the default NaN here, + * and some return the input NaN. + */ + switch (rule) { + case float_infzeronan_dnan_never: + return 2; + case float_infzeronan_dnan_always: + return 3; + case float_infzeronan_dnan_if_qnan: + return is_qnan(c_cls) ? 3 : 2; + default: + g_assert_not_reached(); + } + } + +#if defined(TARGET_ARM) + /* This looks different from the ARM ARM pseudocode, because the ARM ARM * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } #elif defined(TARGET_MIPS) if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - if (infzero) { - return 3; - } /* Prefer sNaN over qNaN, in the a, b, c order. */ if (is_snan(a_cls)) { return 0; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } #elif defined(TARGET_LOONGARCH64) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_PPC) - /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_S390X) - if (infzero) { - return 3; - } - if (is_snan(a_cls)) { return 0; } else if (is_snan(b_cls)) { -- 2.34.1 Explicitly set a rule in the softfloat tests for the inf-zero-nan muladd special case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_infzeronan_dnan_if_qnan. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241202131347.498124-5-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 5 +++++ tests/fp/fp-test.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) { bench_func_t f; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) { unsigned int i; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); verCases_maxErrorCount = n_max_errors; -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the Arm target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-6-peter.maydell@linaro.org --- target/arm/cpu.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, + * and the input NaN if it is signalling */ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_ARM) - /* - * For ARM, the (inf,zero,qnan) case returns the default NaN, - * but (inf,zero,snan) returns the input NaN. - */ - rule = float_infzeronan_dnan_if_qnan; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { /* * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for s390, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-7-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_infzeronan_rule(float_infzeronan_dnan_always, + &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * a default NaN */ rule = float_infzeronan_dnan_never; -#elif defined(TARGET_S390X) - rule = float_infzeronan_dnan_always; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the PPC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-8-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ rule = float_infzeronan_dnan_never; } -#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ +#elif defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - /* - * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the MIPS target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-9-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 9 +++++++++ target/mips/msa.c | 4 ++++ fpu/softfloat-specialize.c.inc | 16 +--------------- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_flush_mode(CPUMIPSState *env) static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); + FloatInfZeroNaNRule izn_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ set_snan_bit_is_one(!nan2008, &env->active_fpu.fp_status); set_default_nan_mode(!nan2008, &env->active_fpu.fp_status); + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN. + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c'. + */ + izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; + set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* set proper signanling bit meaning ("1" means "quiet") */ set_snan_bit_is_one(0, &env->active_tc.msa_fp_status); + + /* Inf * 0 + NaN returns the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, + &env->active_tc.msa_fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - rule = float_infzeronan_dnan_always; - } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - rule = float_infzeronan_dnan_never; - } -#elif defined(TARGET_SPARC) || \ +#if defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the SPARC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-10-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_SPARC) || \ - defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the xtensa target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-11-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) reset_mmu(env); cs->halted = env->runstall; #endif + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the x86 target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-12-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->mmx_status); set_float_2nan_prop_rule(float_2nan_prop_x87, &env->sse_status); + /* + * Only SSE has multiply-add instructions. In the SDM Section 14.5.2 + * "Fused-Multiply-ADD (FMA) Numeric Behavior" the NaN handling is + * specified -- for 0 * inf + NaN the input NaN is selected, and if + * there are multiple input NaNs they are selected in the order a, b, c. + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * Temporarily fall back to ifdef ladder */ #if defined(TARGET_HPPA) || \ - defined(TARGET_I386) || defined(TARGET_LOONGARCH) + defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the loongarch target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-13-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 5 +++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) &env->fp_status); set_flush_to_zero(0, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_HPPA) || \ - defined(TARGET_LOONGARCH) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ +#if defined(TARGET_HPPA) rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the HPPA target, so we can remove the ifdef from pickNaNMulAdd(). As this is the last target to be converted to explicitly setting the rule, we can remove the fallback code in pickNaNMulAdd() entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-14-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 13 +------------ 2 files changed, 3 insertions(+), 12 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { - FloatInfZeroNaNRule rule = status->float_infzeronan_rule; - /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ assert(!status->default_nan_mode); - if (rule == float_infzeronan_none) { - /* - * Temporarily fall back to ifdef ladder - */ -#if defined(TARGET_HPPA) - rule = float_infzeronan_dnan_never; -#endif - } - if (infzero) { /* * Inf * 0 + NaN -- some implementations return the default NaN here, * and some return the input NaN. */ - switch (rule) { + switch (status->float_infzeronan_rule) { case float_infzeronan_dnan_never: return 2; case float_infzeronan_dnan_always: -- 2.34.1 The new implementation of pickNaNMulAdd() will find it convenient to know whether at least one of the three arguments to the muladd was a signaling NaN. We already calculate that in the caller, so pass it in as a new bool have_snan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-15-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 5 +++-- fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, { int which; bool infzero = (ab_mask == float_cmask_infzero); + bool have_snan = (abc_mask & float_cmask_snan); - if (unlikely(abc_mask & float_cmask_snan)) { + if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, if (s->default_nan_mode) { which = 3; } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, | Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN *----------------------------------------------------------------------------*/ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, float_status *status) + bool infzero, bool have_snan, float_status *status) { /* * We guarantee not to require the target to tell us how to -- 2.34.1 IEEE 758 does not define a fixed rule for which NaN to pick as the result if both operands of a 3-operand fused multiply-add operation are NaNs. As a result different architectures have ended up with different rules for propagating NaNs. QEMU currently hardcodes the NaN propagation logic into the binary because pickNaNMulAdd() has an ifdef ladder for different targets. We want to make the propagation rule instead be selectable at runtime, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. It's valid not to set a propagation rule if default_nan_mode is enabled, because in that case there's no need to pick a NaN; all the callers of pickNaNMulAdd() catch this case and skip calling it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-16-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++ include/fpu/softfloat-types.h | 55 +++++++++++ fpu/softfloat-specialize.c.inc | 167 ++++++++------------------------ 3 files changed, 107 insertions(+), 126 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_3nan_prop_rule(Float3NaNPropRule rule, + float_status *status) +{ + status->float_3nan_prop_rule = rule; +} + static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, float_status *status) { @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline Float3NaNPropRule get_float_3nan_prop_rule(float_status *status) +{ + return status->float_3nan_prop_rule; +} + static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) { return status->float_infzeronan_rule; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ this code that are retained. #ifndef SOFTFLOAT_TYPES_H #define SOFTFLOAT_TYPES_H +#include "hw/registerfields.h" + /* * Software IEC/IEEE floating-point types. */ @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * 3-input NaN propagation rule, for fused multiply-add. Individual + * architectures have different rules for which input NaN is + * propagated to the output when there is more than one NaN on the + * input. + * + * If default_nan_mode is enabled then it is valid not to set a NaN + * propagation rule, because the softfloat code guarantees not to try + * to pick a NaN to propagate in default NaN mode. When not in + * default-NaN mode, it is an error for the target not to set the rule + * in float_status if it uses a muladd, and we will assert if we need + * to handle an input NaN and no rule was selected. + * + * The naming scheme for Float3NaNPropRule values is: + * float_3nan_prop_s_abc: + * = "Prefer SNaN over QNaN, then operand A over B over C" + * float_3nan_prop_abc: + * = "Prefer A over B over C regardless of SNaN vs QNAN" + * + * For QEMU, the multiply-add operation is A * B + C. + */ + +/* + * We set the Float3NaNPropRule enum values up so we can select the + * right value in pickNaNMulAdd in a data driven way. + */ +FIELD(3NAN, 1ST, 0, 2) /* which operand is most preferred ? */ +FIELD(3NAN, 2ND, 2, 2) /* which operand is next most preferred ? */ +FIELD(3NAN, 3RD, 4, 2) /* which operand is least preferred ? */ +FIELD(3NAN, SNAN, 6, 1) /* do we prefer SNaN over QNaN ? */ + +#define PROPRULE(X, Y, Z) \ + ((X << R_3NAN_1ST_SHIFT) | (Y << R_3NAN_2ND_SHIFT) | (Z << R_3NAN_3RD_SHIFT)) + +typedef enum __attribute__((__packed__)) { + float_3nan_prop_none = 0, /* No propagation rule specified */ + float_3nan_prop_abc = PROPRULE(0, 1, 2), + float_3nan_prop_acb = PROPRULE(0, 2, 1), + float_3nan_prop_bac = PROPRULE(1, 0, 2), + float_3nan_prop_bca = PROPRULE(1, 2, 0), + float_3nan_prop_cab = PROPRULE(2, 0, 1), + float_3nan_prop_cba = PROPRULE(2, 1, 0), + float_3nan_prop_s_abc = float_3nan_prop_abc | R_3NAN_SNAN_MASK, + float_3nan_prop_s_acb = float_3nan_prop_acb | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bac = float_3nan_prop_bac | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bca = float_3nan_prop_bca | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cab = float_3nan_prop_cab | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cba = float_3nan_prop_cba | R_3NAN_SNAN_MASK, +} Float3NaNPropRule; + +#undef PROPRULE + /* * Rule for result of fused multiply-add 0 * Inf + NaN. * This must be a NaN, but implementations differ on whether this @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + Float3NaNPropRule float_3nan_prop_rule; FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, bool have_snan, float_status *status) { + FloatClass cls[3] = { a_cls, b_cls, c_cls }; + Float3NaNPropRule rule = status->float_3nan_prop_rule; + int which; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } + if (rule == float_3nan_prop_none) { #if defined(TARGET_ARM) - - /* This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. - */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + /* + * This looks different from the ARM ARM pseudocode, because the ARM ARM + * puts the operands to a fused mac operation (a*b)+c in the order c,a,b + */ + rule = float_3nan_prop_s_cab; #elif defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* Prefer sNaN over qNaN, in the a, b, c order. */ - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; + if (snan_bit_is_one(status)) { + rule = float_3nan_prop_s_abc; } else { - return 2; + rule = float_3nan_prop_s_cab; } - } else { - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - } #elif defined(TARGET_LOONGARCH64) - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(c_cls)) { - return 2; - } else { - return 1; - } + /* + * If fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + */ + rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) - /* Prefer SNaN over QNaN, order C, B, A. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } + rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) - /* - * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns - * an input NaN if we have one (ie c). - */ - if (status->use_first_nan) { - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; + if (status->use_first_nan) { + rule = float_3nan_prop_abc; } else { - return 2; + rule = float_3nan_prop_cba; } - } else { - if (is_nan(c_cls)) { - return 2; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - } #else - /* A default implementation: prefer a to b to c. - * This is unlikely to actually match any real implementation. - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_abc; #endif + } + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } + return which; } /*---------------------------------------------------------------------------- -- 2.34.1 Explicitly set a rule in the softfloat tests for propagating NaNs in the muladd case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_3nan_prop_s_cab. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-17-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test.c | 1 + 2 files changed, 2 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-18-peter.maydell@linaro.org --- target/arm/cpu.c | 5 +++++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 3-input NaN propagation prefers SNaN over QNaN, and then + * operand C over A over B (see FPProcessNaNs3() pseudocode, + * but note that for QEMU muladd is a * b + c, whereas for + * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling */ @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_ARM) - /* - * This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b - */ - rule = float_3nan_prop_s_cab; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { rule = float_3nan_prop_s_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for loongarch, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-19-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) * case sets InvalidOp and returns the input value 'c' */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_LOONGARCH64) - rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) /* * If fRA is a NaN return it; otherwise if fRB is a NaN return it; -- 2.34.1 Set the Float3NaNPropRule explicitly for PPC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-20-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 6 ------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * NaN propagation for fused multiply-add: + * if fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + * whereas QEMU labels the operands as (a * b) + c. + */ + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->vec_status); /* * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer * to return an input NaN if we have one (ie c) rather than generating diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_PPC) - /* - * If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) -- 2.34.1 Set the Float3NaNPropRule explicitly for s390x, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-21-peter.maydell@linaro.org --- target/s390x/cpu.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); /* fall through */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_S390X) - rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) -- 2.34.1 Set the Float3NaNPropRule explicitly for SPARC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-22-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For fused-multiply add, prefer SNaN over QNaN, then C->B->A */ + set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_SPARC) - rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-23-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 4 ++++ target/mips/msa.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); FloatInfZeroNaNRule izn_rule; + Float3NaNPropRule nan3_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); + nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; + set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->active_tc.msa_fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, + &env->active_tc.msa_fp_status); + /* clear float_status exception flags */ set_float_exception_flags(0, &env->active_tc.msa_fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - rule = float_3nan_prop_s_abc; - } else { - rule = float_3nan_prop_s_cab; - } -#elif defined(TARGET_XTENSA) +#if defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for xtensa, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-24-peter.maydell@linaro.org --- target/xtensa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 8 -------- 2 files changed, 2 insertions(+), 8 deletions(-) diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); + set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, + &env->fp_status); } void HELPER(wur_fpu2k_fcr)(CPUXtensaState *env, uint32_t v) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_XTENSA) - if (status->use_first_nan) { - rule = float_3nan_prop_abc; - } else { - rule = float_3nan_prop_cba; - } -#else rule = float_3nan_prop_abc; -#endif } assert(rule != float_3nan_prop_none); -- 2.34.1 Set the Float3NaNPropRule explicitly for i386. We had no i386-specific behaviour in the old ifdef ladder, so we were using the default "prefer a then b then c" fallback; this is actually the correct per-the-spec handling for i386. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-25-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) * there are multiple input NaNs they are selected in the order a, b, c. */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) -- 2.34.1 Set the Float3NaNPropRule explicitly for HPPA, and remove the ifdef from pickNaNMulAdd(). HPPA is the only target that was using the default branch of the ifdef ladder (other targets either do not use muladd or set default_nan_mode), so we can remove the ifdef fallback entirely now (allowing the "rule not set" case to fall into the default of the switch statement and assert). We add a TODO note that the HPPA rule is probably wrong; this is not a behavioural change for this refactoring. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-26-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * TODO: The HPPA architecture reference only documents its NaN + * propagation rule for 2-operand operations. Testing on real hardware + * might be necessary to confirm whether this order for muladd is correct. + * Not preferring the SNaN is almost certainly incorrect as it diverges + * from the documented rules for 2-operand operations. + */ + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } - if (rule == float_3nan_prop_none) { - rule = float_3nan_prop_abc; - } - assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ -- 2.34.1 The use_first_nan field in float_status was an xtensa-specific way to select at runtime from two different NaN propagation rules. Now that xtensa is using the target-agnostic NaN propagation rule selection that we've just added, we can remove use_first_nan, because there is no longer any code that reads it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-27-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 5 ----- include/fpu/softfloat-types.h | 1 - target/xtensa/fpu_helper.c | 1 - 3 files changed, 7 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_snan_bit_is_one(bool val, float_status *status) status->snan_bit_is_one = val; } -static inline void set_use_first_nan(bool val, float_status *status) -{ - status->use_first_nan = val; -} - static inline void set_no_signaling_nans(bool val, float_status *status) { status->no_signaling_nans = val; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { * softfloat-specialize.inc.c) */ bool snan_bit_is_one; - bool use_first_nan; bool no_signaling_nans; /* should overflowed results subtract re_bias to its exponent? */ bool rebias_overflow; diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ static const struct { void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) { - set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, -- 2.34.1 Currently m68k_cpu_reset_hold() calls floatx80_default_nan(NULL) to get the NaN bit pattern to reset the FPU registers. This works because it happens that our implementation of floatx80_default_nan() doesn't actually look at the float_status pointer except for TARGET_MIPS. However, this isn't guaranteed, and to be able to remove the ifdef in floatx80_default_nan() we're going to need a real float_status here. Rearrange m68k_cpu_reset_hold() so that we initialize env->fp_status earlier, and thus can pass it to floatx80_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-28-peter.maydell@linaro.org --- target/m68k/cpu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); CPUM68KState *env = cpu_env(cs); - floatx80 nan = floatx80_default_nan(NULL); + floatx80 nan; int i; if (mcc->parent_phases.hold) { @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) #else cpu_m68k_set_sr(env, SR_S | SR_I); #endif - for (i = 0; i < 8; i++) { - env->fregs[i].d = nan; - } - cpu_m68k_set_fpcr(env, 0); /* * M68000 FAMILY PROGRAMMER'S REFERENCE MANUAL * 3.4 FLOATING-POINT INSTRUCTION DETAILS @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + + nan = floatx80_default_nan(&env->fp_status); + for (i = 0; i < 8; i++) { + env->fregs[i].d = nan; + } + cpu_m68k_set_fpcr(env, 0); env->fpsr = 0; /* TODO: We should set PC from the interrupt vector. */ -- 2.34.1 We create our 128-bit default NaN by calling parts64_default_nan() and then adjusting the result. We can do the same trick for creating the floatx80 default NaN, which lets us drop a target ifdef. floatx80 is used only by: i386 m68k arm nwfpe old floating-point emulation emulation support (which is essentially dead, especially the parts involving floatx80) PPC (only in the xsrqpxp instruction, which just rounds an input value by converting to floatx80 and back, so will never generate the default NaN) The floatx80 default NaN as currently implemented is: m68k: sign = 0, exp = 1...1, int = 1, frac = 1....1 i386: sign = 1, exp = 1...1, int = 1, frac = 10...0 These are the same as the parts64_default_nan for these architectures. This is technically a possible behaviour change for arm linux-user nwfpe emulation emulation, because the default NaN will now have the sign bit clear. But we were already generating a different floatx80 default NaN from the real kernel emulation we are supposedly following, which appears to use an all-bits-1 value: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L267 This won't affect the only "real" use of the nwfpe emulation, which is ancient binaries that used it as part of the old floating point calling convention; that only uses loads and stores of 32 and 64 bit floats, not any of the floatx80 behaviour the original hardware had. We also get the nwfpe float64 default NaN value wrong: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L166 so if we ever cared about this obscure corner the right fix would be to correct that so nwfpe used its own default-NaN setting rather than the Arm VFP one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-29-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts128_silence_nan(FloatParts128 *p, float_status *status) floatx80 floatx80_default_nan(float_status *status) { floatx80 r; + /* + * Extrapolate from the choices made by parts64_default_nan to fill + * in the floatx80 format. We assume that floatx80's explicit + * integer bit is always set (this is true for i386 and m68k, + * which are the only real users of this format). + */ + FloatParts64 p64; + parts64_default_nan(&p64, status); - /* None of the targets that have snan_bit_is_one use floatx80. */ - assert(!snan_bit_is_one(status)); -#if defined(TARGET_M68K) - r.low = UINT64_C(0xFFFFFFFFFFFFFFFF); - r.high = 0x7FFF; -#else - /* X86 */ - r.low = UINT64_C(0xC000000000000000); - r.high = 0xFFFF; -#endif + r.high = 0x7FFF | (p64.sign << 15); + r.low = (1ULL << DECOMPOSED_BINARY_POINT) | p64.frac; return r; } -- 2.34.1 In target/loongarch's helper_fclass_s() and helper_fclass_d() we pass a zero-initialized float_status struct to float32_is_quiet_nan() and float64_is_quiet_nan(), with the cryptic comment "for snan_bit_is_one". This pattern appears to have been copied from target/riscv, where it is used because the functions there do not have ready access to the CPU state struct. The comment presumably refers to the fact that the main reason the is_quiet_nan() functions want the float_state is because they want to know about the snan_bit_is_one config. In the loongarch helpers, though, we have the CPU state struct to hand. Use the usual env->fp_status here. This avoids our needing to track that we need to update the initializer of the local float_status structs when the core softfloat code adds new options for targets to configure their behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-30-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_s(CPULoongArchState *env, uint64_t fj) } else if (float32_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float32_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float32_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float32_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_d(CPULoongArchState *env, uint64_t fj) } else if (float64_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float64_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float64_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float64_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } -- 2.34.1 In the frem helper, we have a local float_status because we want to execute the floatx80_div() with a custom rounding mode. Instead of zero-initializing the local float_status and then having to set it up with the m68k standard behaviour (including the NaN propagation rule and copying the rounding precision from env->fp_status), initialize it as a complete copy of env->fp_status. This will avoid our having to add new code in this function for every new config knob we add to fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-31-peter.maydell@linaro.org --- target/m68k/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/m68k/fpu_helper.c b/target/m68k/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/fpu_helper.c +++ b/target/m68k/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(frem)(CPUM68KState *env, FPReg *res, FPReg *val0, FPReg *val1) fp_rem = floatx80_rem(val1->d, val0->d, &env->fp_status); if (!floatx80_is_any_nan(fp_rem)) { - float_status fp_status = { }; + /* Use local temporary fp_status to set different rounding mode */ + float_status fp_status = env->fp_status; uint32_t quotient; int sign; /* Calculate quotient directly using round to nearest mode */ - set_float_2nan_prop_rule(float_2nan_prop_ab, &fp_status); set_float_rounding_mode(float_round_nearest_even, &fp_status); - set_floatx80_rounding_precision( - get_floatx80_rounding_precision(&env->fp_status), &fp_status); fp_quot.d = floatx80_div(val1->d, val0->d, &fp_status); sign = extractFloatx80Sign(fp_quot.d); -- 2.34.1 In cf_fpu_gdb_get_reg() and cf_fpu_gdb_set_reg() we do the conversion from float64 to floatx80 using a scratch float_status, because we don't want the conversion to affect the CPU's floating point exception status. Currently we use a zero-initialized float_status. This will get steadily more awkward as we add config knobs to float_status that the target must initialize. Avoid having to add any of that configuration here by instead initializing our local float_status from the env->fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-32-peter.maydell@linaro.org --- target/m68k/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/m68k/helper.c b/target/m68k/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/helper.c +++ b/target/m68k/helper.c @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_get_reg(CPUState *cs, GByteArray *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; return gdb_get_reg64(mem_buf, floatx80_to_float64(env->fregs[n].d, &s)); } switch (n) { @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_set_reg(CPUState *cs, uint8_t *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; env->fregs[n].d = float64_to_floatx80(ldq_be_p(mem_buf), &s); return 8; } -- 2.34.1 In the helper functions flcmps and flcmpd we use a scratch float_status so that we don't change the CPU state if the comparison raises any floating point exception flags. Instead of zero-initializing this scratch float_status, initialize it as a copy of env->fp_status. This avoids the need to explicitly initialize settings like the NaN propagation rule or others we might add to softfloat in future. To do this we need to pass the CPU env pointer in to the helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-33-peter.maydell@linaro.org --- target/sparc/helper.h | 4 ++-- target/sparc/fop_helper.c | 8 ++++---- target/sparc/translate.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/target/sparc/helper.h b/target/sparc/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/helper.h +++ b/target/sparc/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(fcmpd, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmped, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmpq, TCG_CALL_NO_WG, i32, env, i128, i128) DEF_HELPER_FLAGS_3(fcmpeq, TCG_CALL_NO_WG, i32, env, i128, i128) -DEF_HELPER_FLAGS_2(flcmps, TCG_CALL_NO_RWG_SE, i32, f32, f32) -DEF_HELPER_FLAGS_2(flcmpd, TCG_CALL_NO_RWG_SE, i32, f64, f64) +DEF_HELPER_FLAGS_3(flcmps, TCG_CALL_NO_RWG_SE, i32, env, f32, f32) +DEF_HELPER_FLAGS_3(flcmpd, TCG_CALL_NO_RWG_SE, i32, env, f64, f64) DEF_HELPER_2(raise_exception, noreturn, env, int) DEF_HELPER_FLAGS_3(faddd, TCG_CALL_NO_WG, f64, env, f64, f64) diff --git a/target/sparc/fop_helper.c b/target/sparc/fop_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/fop_helper.c +++ b/target/sparc/fop_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t helper_fcmpeq(CPUSPARCState *env, Int128 src1, Int128 src2) return finish_fcmp(env, r, GETPC()); } -uint32_t helper_flcmps(float32 src1, float32 src2) +uint32_t helper_flcmps(CPUSPARCState *env, float32 src1, float32 src2) { /* * FLCMP never raises an exception nor modifies any FSR fields. * Perform the comparison with a dummy fp environment. */ - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); @@ -XXX,XX +XXX,XX @@ uint32_t helper_flcmps(float32 src1, float32 src2) g_assert_not_reached(); } -uint32_t helper_flcmpd(float64 src1, float64 src2) +uint32_t helper_flcmpd(CPUSPARCState *env, float64 src1, float64 src2) { - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); diff --git a/target/sparc/translate.c b/target/sparc/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/translate.c +++ b/target/sparc/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPs(DisasContext *dc, arg_FLCMPs *a) src1 = gen_load_fpr_F(dc, a->rs1); src2 = gen_load_fpr_F(dc, a->rs2); - gen_helper_flcmps(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmps(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPd(DisasContext *dc, arg_FLCMPd *a) src1 = gen_load_fpr_D(dc, a->rs1); src2 = gen_load_fpr_D(dc, a->rs2); - gen_helper_flcmpd(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmpd(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } -- 2.34.1 In the helper_compute_fprf functions, we pass a dummy float_status in to the is_signaling_nan() function. This is unnecessary, because we have convenient access to the CPU env pointer here and that is already set up with the correct values for the snan_bit_is_one and no_signaling_nans config settings. is_signaling_nan() doesn't ever update the fp_status with any exception flags, so there is no reason not to use env->fp_status here. Use env->fp_status instead of the dummy fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-34-peter.maydell@linaro.org --- target/ppc/fpu_helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/ppc/fpu_helper.c b/target/ppc/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/fpu_helper.c +++ b/target/ppc/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void helper_compute_fprf_##tp(CPUPPCState *env, tp arg) \ } else if (tp##_is_infinity(arg)) { \ fprf = neg ? 0x09 << FPSCR_FPRF : 0x05 << FPSCR_FPRF; \ } else { \ - float_status dummy = { }; /* snan_bit_is_one = 0 */ \ - if (tp##_is_signaling_nan(arg, &dummy)) { \ + if (tp##_is_signaling_nan(arg, &env->fp_status)) { \ fprf = 0x00 << FPSCR_FPRF; \ } else { \ fprf = 0x11 << FPSCR_FPRF; \ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Now that float_status has a bunch of fp parameters, it is easier to copy an existing structure than create one from scratch. Begin by copying the structure that corresponds to the FPSR and make only the adjustments required for BFloat16 semantics. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/vec_helper.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vec_helper.c +++ b/target/arm/tcg/vec_helper.c @@ -XXX,XX +XXX,XX @@ bool is_ebf(CPUARMState *env, float_status *statusp, float_status *oddstatusp) * no effect on AArch32 instructions. */ bool ebf = is_a64(env) && env->vfp.fpcr & FPCR_EBF; - *statusp = (float_status){ - .tininess_before_rounding = float_tininess_before_rounding, - .float_rounding_mode = float_round_to_odd_inf, - .flush_to_zero = true, - .flush_inputs_to_zero = true, - .default_nan_mode = true, - }; + + *statusp = env->vfp.fp_status; + set_default_nan_mode(true, statusp); if (ebf) { - float_status *fpst = &env->vfp.fp_status; - set_flush_to_zero(get_flush_to_zero(fpst), statusp); - set_flush_inputs_to_zero(get_flush_inputs_to_zero(fpst), statusp); - set_float_rounding_mode(get_float_rounding_mode(fpst), statusp); - /* EBF=1 needs to do a step with round-to-odd semantics */ *oddstatusp = *statusp; set_float_rounding_mode(float_round_to_odd, oddstatusp); + } else { + set_flush_to_zero(true, statusp); + set_flush_inputs_to_zero(true, statusp); + set_float_rounding_mode(float_round_to_odd_inf, statusp); } - return ebf; } -- 2.34.1 Currently we hardcode the default NaN value in parts64_default_nan() using a compile-time ifdef ladder. This is awkward for two cases: * for single-QEMU-binary we can't hard-code target-specifics like this * for Arm FEAT_AFP the default NaN value depends on FPCR.AH (specifically the sign bit is different) Add a field to float_status to specify the default NaN value; fall back to the old ifdef behaviour if these are not set. The default NaN value is specified by setting a uint8_t to a pattern corresponding to the sign and upper fraction parts of the NaN; the lower bits of the fraction are set from bit 0 of the pattern. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-35-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++++++ include/fpu/softfloat-types.h | 10 ++++++ fpu/softfloat-specialize.c.inc | 55 ++++++++++++++++++++------------- 3 files changed, 54 insertions(+), 22 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, status->float_infzeronan_rule = rule; } +static inline void set_float_default_nan_pattern(uint8_t dnan_pattern, + float_status *status) +{ + status->default_nan_pattern = dnan_pattern; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status return status->float_infzeronan_rule; } +static inline uint8_t get_float_default_nan_pattern(float_status *status) +{ + return status->default_nan_pattern; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { /* should denormalised inputs go to zero and set the input_denormal flag? */ bool flush_inputs_to_zero; bool default_nan_mode; + /* + * The pattern to use for the default NaN. Here the high bit specifies + * the default NaN's sign bit, and bits 6..0 specify the high bits of the + * fractional part. The low bits of the fractional part are copies of bit 0. + * The exponent of the default NaN is (as for any NaN) always all 1s. + * Note that a value of 0 here is not a valid NaN. The target must set + * this to the correct non-zero value, or we will assert when trying to + * create a default NaN. + */ + uint8_t default_nan_pattern; /* * The flags below are not used on all specializations and may * constant fold away (see snan_bit_is_one()/no_signalling_nans() in diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) { bool sign = 0; uint64_t frac; + uint8_t dnan_pattern = status->default_nan_pattern; + if (dnan_pattern == 0) { #if defined(TARGET_SPARC) || defined(TARGET_M68K) - /* !snan_bit_is_one, set all bits */ - frac = (1ULL << DECOMPOSED_BINARY_POINT) - 1; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ + /* Sign bit clear, all frac bits set */ + dnan_pattern = 0b01111111; +#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ || defined(TARGET_MICROBLAZE) - /* !snan_bit_is_one, set sign and msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - sign = 1; + /* Sign bit set, most significant frac bit set */ + dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) - /* snan_bit_is_one, set msb-1. */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 2); + /* Sign bit clear, msb-1 frac bit set */ + dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) - sign = 1; - frac = ~0ULL; + /* Sign bit set, all frac bits set. */ + dnan_pattern = 0b11111111; #else - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* set all bits other than msb */ - frac = (1ULL << (DECOMPOSED_BINARY_POINT - 1)) - 1; - } else { - /* set msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - } + /* + * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, + * S390, SH4, TriCore, and Xtensa. Our other supported targets + * do not have floating-point. + */ + if (snan_bit_is_one(status)) { + /* sign bit clear, set all frac bits other than msb */ + dnan_pattern = 0b00111111; + } else { + /* sign bit clear, set frac msb */ + dnan_pattern = 0b01000000; + } #endif + } + assert(dnan_pattern != 0); + + sign = dnan_pattern >> 7; + /* + * Place default_nan_pattern [6:0] into bits [62:56], + * and replecate bit [0] down into [55:0] + */ + frac = deposit64(0, DECOMPOSED_BINARY_POINT - 7, 7, dnan_pattern); + frac = deposit64(frac, 0, DECOMPOSED_BINARY_POINT - 7, -(dnan_pattern & 1)); *p = (FloatParts64) { .cls = float_class_qnan, -- 2.34.1 Set the default NaN pattern explicitly for the tests/fp code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-36-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 1 + 3 files changed, 3 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); + set_float_default_nan_pattern(0b01000000, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test-log2.c b/tests/fp/fp-test-log2.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test-log2.c +++ b/tests/fp/fp-test-log2.c @@ -XXX,XX +XXX,XX @@ int main(int ac, char **av) int i; set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_rounding_mode(float_round_nearest_even, &qsf); test.d = 0.0; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-37-peter.maydell@linaro.org --- target/microblaze/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj, ResetType type) * this architecture. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) /* start in user mode with interrupts enabled. */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ - || defined(TARGET_MICROBLAZE) +#elif defined(TARGET_I386) || defined(TARGET_X86_64) /* Sign bit set, most significant frac bit set */ dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-38-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 4 ++++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); + set_float_default_nan_pattern(0b11000000, &env->mmx_status); + set_float_default_nan_pattern(0b11000000, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) - /* Sign bit set, most significant frac bit set */ - dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) /* Sign bit clear, msb-1 frac bit set */ dnan_pattern = 0b00100000; -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-39-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN: sign bit clear, msb-1 frac bit set */ + set_float_default_nan_pattern(0b00100000, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_HPPA) - /* Sign bit clear, msb-1 frac bit set */ - dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; -- 2.34.1 Set the default NaN pattern explicitly for the alpha target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-40-peter.maydell@linaro.org --- target/alpha/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/alpha/cpu.c b/target/alpha/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/alpha/cpu.c +++ b/target/alpha/cpu.c @@ -XXX,XX +XXX,XX @@ static void alpha_cpu_initfn(Object *obj) * operand in Fa. That is float_2nan_prop_ba. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) env->flags = ENV_FLAG_PS_USER | ENV_FLAG_FEN; cpu_alpha_store_fpcr(env, (uint64_t)(FPCR_INVD | FPCR_DZED | FPCR_OVFD -- 2.34.1 Set the default NaN pattern explicitly for the arm target. This includes setting it for the old linux-user nwfpe emulation. For nwfpe, our default doesn't match the real kernel, but we avoid making a behaviour change in this commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-41-peter.maydell@linaro.org --- linux-user/arm/nwfpe/fpa11.c | 5 +++++ target/arm/cpu.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/linux-user/arm/nwfpe/fpa11.c b/linux-user/arm/nwfpe/fpa11.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/nwfpe/fpa11.c +++ b/linux-user/arm/nwfpe/fpa11.c @@ -XXX,XX +XXX,XX @@ void resetFPA11(void) * this late date. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &fpa11->fp_status); + /* + * Use the same default NaN value as Arm VFP. This doesn't match + * the Linux kernel's nwfpe emulation, which uses an all-1s value. + */ + set_float_default_nan_pattern(0b01000000, &fpa11->fp_status); } void SetRoundingMode(const unsigned int opcode) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling + * * Default NaN has sign bit clear, msb frac bit set */ static void arm_set_default_fp_behaviours(float_status *s) { @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); + set_float_default_nan_pattern(0b01000000, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) -- 2.34.1 Set the default NaN pattern explicitly for loongarch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-42-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) -- 2.34.1 Set the default NaN pattern explicitly for m68k. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-43-peter.maydell@linaro.org --- target/m68k/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + /* Default NaN: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); nan = floatx80_default_nan(&env->fp_status); for (i = 0; i < 8; i++) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) || defined(TARGET_M68K) +#if defined(TARGET_SPARC) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; #elif defined(TARGET_HEXAGON) -- 2.34.1 Set the default NaN pattern explicitly for MIPS. Note that this is our only target which currently changes the default NaN at runtime (which it was previously doing indirectly when it changed the snan_bit_is_one setting). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-44-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 7 +++++++ target/mips/msa.c | 3 +++ 2 files changed, 10 insertions(+) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + /* + * With nan2008, the default NaN value has the sign bit clear and the + * frac msb set; with the older mode, the sign bit is clear, and all + * frac bits except the msb are set. + */ + set_float_default_nan_pattern(nan2008 ? 0b01000000 : 0b00111111, + &env->active_fpu.fp_status); } diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* Inf * 0 + NaN returns the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->active_tc.msa_fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, + &env->active_tc.msa_fp_status); } -- 2.34.1 Set the default NaN pattern explicitly for openrisc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-45-peter.maydell@linaro.org --- target/openrisc/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &cpu->env.fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &cpu->env.fp_status); #ifndef CONFIG_USER_ONLY cpu->env.picmr = 0x00000000; -- 2.34.1 Set the default NaN pattern explicitly for ppc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-46-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); + /* Default NaN: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); + set_float_default_nan_pattern(0b01000000, &env->vec_status); + for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; -- 2.34.1 Set the default NaN pattern explicitly for sh4. Note that sh4 is one of the only three targets (the others being HPPA and sometimes MIPS) that has snan_bit_is_one set. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-47-peter.maydell@linaro.org --- target/sh4/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static void superh_cpu_reset_hold(Object *obj, ResetType type) set_flush_to_zero(1, &env->fp_status); #endif set_default_nan_mode(1, &env->fp_status); + /* sign bit clear, set all frac bits other than msb */ + set_float_default_nan_pattern(0b00111111, &env->fp_status); } static void superh_cpu_disas_set_info(CPUState *cpu, disassemble_info *info) -- 2.34.1 Set the default NaN pattern explicitly for rx. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-48-peter.maydell@linaro.org --- target/rx/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj, ResetType type) * then prefer dest over source", which is float_2nan_prop_s_ab. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } static ObjectClass *rx_cpu_class_by_name(const char *cpu_model) -- 2.34.1 Set the default NaN pattern explicitly for s390x. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-49-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; -- 2.34.1 Set the default NaN pattern explicitly for SPARC, and remove the ifdef from parts64_default_nan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-50-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 +---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN value: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) - /* Sign bit clear, all frac bits set */ - dnan_pattern = 0b01111111; -#elif defined(TARGET_HEXAGON) +#if defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; #else -- 2.34.1 Set the default NaN pattern explicitly for xtensa. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-51-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } -- 2.34.1 Set the default NaN pattern explicitly for hexagon. Remove the ifdef from parts64_default_nan(); the only remaining unconverted targets all use the default case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-52-peter.maydell@linaro.org --- target/hexagon/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 ----- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_cpu_reset_hold(Object *obj, ResetType type) set_default_nan_mode(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); + /* Default NaN value: sign bit set, all frac bits set */ + set_float_default_nan_pattern(0b11111111, &env->fp_status); } static void hexagon_cpu_disas_set_info(CPUState *s, disassemble_info *info) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_HEXAGON) - /* Sign bit set, all frac bits set. */ - dnan_pattern = 0b11111111; -#else /* * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, * S390, SH4, TriCore, and Xtensa. Our other supported targets @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) /* sign bit clear, set frac msb */ dnan_pattern = 0b01000000; } -#endif } assert(dnan_pattern != 0); -- 2.34.1 Set the default NaN pattern explicitly for riscv. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-53-peter.maydell@linaro.org --- target/riscv/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) cs->exception_index = RISCV_EXCP_NONE; env->load_res = -1; set_default_nan_mode(1, &env->fp_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); env->vill = true; #ifndef CONFIG_USER_ONLY -- 2.34.1 Set the default NaN pattern explicitly for tricore. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-54-peter.maydell@linaro.org --- target/tricore/helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/tricore/helper.c b/target/tricore/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/helper.c +++ b/target/tricore/helper.c @@ -XXX,XX +XXX,XX @@ void fpu_set_state(CPUTriCoreState *env) set_flush_to_zero(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); set_default_nan_mode(1, &env->fp_status); + /* Default NaN pattern: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } uint32_t psw_read(CPUTriCoreState *env) -- 2.34.1 Now that all our targets have bene converted to explicitly specify their pattern for the default NaN value we can remove the remaining fallback code in parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-55-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint64_t frac; uint8_t dnan_pattern = status->default_nan_pattern; - if (dnan_pattern == 0) { - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* sign bit clear, set all frac bits other than msb */ - dnan_pattern = 0b00111111; - } else { - /* sign bit clear, set frac msb */ - dnan_pattern = 0b01000000; - } - } assert(dnan_pattern != 0); sign = dnan_pattern >> 7; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaNMulAdd into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-3-richard.henderson@linaro.org [PMM: keep comment from old code in new location] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 41 +++++++++++++++++++++++++- fpu/softfloat-specialize.c.inc | 54 ---------------------------------- 2 files changed, 40 insertions(+), 55 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } if (s->default_nan_mode) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ which = 3; + } else if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the + * default NaN here, and some return the input NaN. + */ + switch (s->float_infzeronan_rule) { + case float_infzeronan_dnan_never: + which = 2; + break; + case float_infzeronan_dnan_always: + which = 3; + break; + case float_infzeronan_dnan_if_qnan: + which = is_qnan(c->cls) ? 3 : 2; + break; + default: + g_assert_not_reached(); + } } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); + FloatClass cls[3] = { a->cls, b->cls, c->cls }; + Float3NaNPropRule rule = s->float_3nan_prop_rule; + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a three-input operation. -| For the moment we assume that no CPU needs the 'larger significand' -| information. -| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN -*----------------------------------------------------------------------------*/ -static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, bool have_snan, float_status *status) -{ - FloatClass cls[3] = { a_cls, b_cls, c_cls }; - Float3NaNPropRule rule = status->float_3nan_prop_rule; - int which; - - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify. - */ - assert(!status->default_nan_mode); - - if (infzero) { - /* - * Inf * 0 + NaN -- some implementations return the default NaN here, - * and some return the input NaN. - */ - switch (status->float_infzeronan_rule) { - case float_infzeronan_dnan_never: - return 2; - case float_infzeronan_dnan_always: - return 3; - case float_infzeronan_dnan_if_qnan: - return is_qnan(c_cls) ? 3 : 2; - default: - g_assert_not_reached(); - } - } - - assert(rule != float_3nan_prop_none); - if (have_snan && (rule & R_3NAN_SNAN_MASK)) { - /* We have at least one SNaN input and should prefer it */ - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); - } else { - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); - } - return which; -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remove "3" as a special case for which and simply branch to return the desired value. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, * But if we're not in default-NaN mode then the target must * specify. */ - which = 3; + goto default_nan; } else if (infzero) { /* * Inf * 0 + NaN -- some implementations return the @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, */ switch (s->float_infzeronan_rule) { case float_infzeronan_dnan_never: - which = 2; break; case float_infzeronan_dnan_always: - which = 3; - break; + goto default_nan; case float_infzeronan_dnan_if_qnan: - which = is_qnan(c->cls) ? 3 : 2; + if (is_qnan(c->cls)) { + goto default_nan; + } break; default: g_assert_not_reached(); } + which = 2; } else { FloatClass cls[3] = { a->cls, b->cls, c->cls }; Float3NaNPropRule rule = s->float_3nan_prop_rule; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } } - if (which == 3) { - parts_default_nan(a, s); - return a; - } - switch (which) { case 0: break; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, parts_silence_nan(a, s); } return a; + + default_nan: + parts_default_nan(a, s); + return a; } /* -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Assign the pointer return value to 'a' directly, rather than going through an intermediary index. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, FloatPartsN *c, float_status *s, int ab_mask, int abc_mask) { - int which; bool infzero = (ab_mask == float_cmask_infzero); bool have_snan = (abc_mask & float_cmask_snan); + FloatPartsN *ret; if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, default: g_assert_not_reached(); } - which = 2; + ret = c; } else { - FloatClass cls[3] = { a->cls, b->cls, c->cls }; + FloatPartsN *val[3] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); + } while (!is_snan(ret->cls)); } else { do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); + } while (!is_nan(ret->cls)); } } - switch (which) { - case 0: - break; - case 1: - a = b; - break; - case 2: - a = c; - break; - default: - g_assert_not_reached(); + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; default_nan: parts_default_nan(a, s); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> While all indices into val[] should be in [0-2], the mask applied is two bits. To help static analysis see there is no possibility of read beyond the end of the array, pad the array to 4 entries, with the final being (implicitly) NULL. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } ret = c; } else { - FloatPartsN *val[3] = { a, b, c }; + FloatPartsN *val[R_3NAN_1ST_MASK + 1] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This function is part of the public interface and is not "specialized" to any target in any way. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 52 ++++++++++++++++++++++++++++++++++ fpu/softfloat-specialize.c.inc | 52 ---------------------------------- 2 files changed, 52 insertions(+), 52 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, *zExpPtr = 1 - shiftCount; } +/*---------------------------------------------------------------------------- +| Takes two extended double-precision floating-point values `a' and `b', one +| of which is a NaN, and returns the appropriate NaN result. If either `a' or +| `b' is a signaling NaN, the invalid exception is raised. +*----------------------------------------------------------------------------*/ + +floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) +{ + bool aIsLargerSignificand; + FloatClass a_cls, b_cls; + + /* This is not complete, but is good enough for pickNaN. */ + a_cls = (!floatx80_is_any_nan(a) + ? float_class_normal + : floatx80_is_signaling_nan(a, status) + ? float_class_snan + : float_class_qnan); + b_cls = (!floatx80_is_any_nan(b) + ? float_class_normal + : floatx80_is_signaling_nan(b, status) + ? float_class_snan + : float_class_qnan); + + if (is_snan(a_cls) || is_snan(b_cls)) { + float_raise(float_flag_invalid, status); + } + + if (status->default_nan_mode) { + return floatx80_default_nan(status); + } + + if (a.low < b.low) { + aIsLargerSignificand = 0; + } else if (b.low < a.low) { + aIsLargerSignificand = 1; + } else { + aIsLargerSignificand = (a.high < b.high) ? 1 : 0; + } + + if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { + if (is_snan(b_cls)) { + return floatx80_silence_nan(b, status); + } + return b; + } else { + if (is_snan(a_cls)) { + return floatx80_silence_nan(a, status); + } + return a; + } +} + /*---------------------------------------------------------------------------- | Takes an abstract floating-point value having sign `zSign', exponent `zExp', | and extended significand formed by the concatenation of `zSig0' and `zSig1', diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ floatx80 floatx80_silence_nan(floatx80 a, float_status *status) return a; } -/*---------------------------------------------------------------------------- -| Takes two extended double-precision floating-point values `a' and `b', one -| of which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) -{ - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; - - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { - return floatx80_default_nan(status); - } - - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the quadruple-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Unpacking and repacking the parts may be slightly more work than we did before, but we get to reuse more code. For a code path handling exceptional values, this is an improvement. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241203203949.483774-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 43 +++++-------------------------------------- 1 file changed, 5 insertions(+), 38 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) { - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; + FloatParts128 pa, pb, *pr; - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { + if (!floatx80_unpack_canonical(&pa, a, status) || + !floatx80_unpack_canonical(&pb, b, status)) { return floatx80_default_nan(status); } - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } + pr = parts_pick_nan(&pa, &pb, status); + return floatx80_round_pack_canonical(pr, status); } /*---------------------------------------------------------------------------- -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaN into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 82 +++++++++++++++++++++++++---- fpu/softfloat-specialize.c.inc | 96 ---------------------------------- 2 files changed, 73 insertions(+), 105 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + int cmp, which; + if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } if (s->default_nan_mode) { parts_default_nan(a, s); - } else { - int cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } + return a; + } - if (pickNaN(a->cls, b->cls, cmp > 0, s)) { - a = b; - } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + + switch (s->float_2nan_prop_rule) { + case float_2nan_prop_s_ab: if (is_snan(a->cls)) { - parts_silence_nan(a, s); + which = 0; + } else if (is_snan(b->cls)) { + which = 1; + } else if (is_qnan(a->cls)) { + which = 0; + } else { + which = 1; } + break; + case float_2nan_prop_s_ba: + if (is_snan(b->cls)) { + which = 1; + } else if (is_snan(a->cls)) { + which = 0; + } else if (is_qnan(b->cls)) { + which = 1; + } else { + which = 0; + } + break; + case float_2nan_prop_ab: + which = is_nan(a->cls) ? 0 : 1; + break; + case float_2nan_prop_ba: + which = is_nan(b->cls) ? 1 : 0; + break; + case float_2nan_prop_x87: + /* + * This implements x87 NaN propagation rules: + * SNaN + QNaN => return the QNaN + * two SNaNs => return the one with the larger significand, silenced + * two QNaNs => return the one with the larger significand + * SNaN and a non-NaN => return the SNaN, silenced + * QNaN and a non-NaN => return the QNaN + * + * If we get down to comparing significands and they are the same, + * return the NaN with the positive sign bit (if any). + */ + if (is_snan(a->cls)) { + if (is_snan(b->cls)) { + which = cmp > 0 ? 0 : 1; + } else { + which = is_qnan(b->cls) ? 1 : 0; + } + } else if (is_qnan(a->cls)) { + if (is_snan(b->cls) || !is_qnan(b->cls)) { + which = 0; + } else { + which = cmp > 0 ? 0 : 1; + } + } else { + which = 1; + } + break; + default: + g_assert_not_reached(); + } + + if (which) { + a = b; + } + if (is_snan(a->cls)) { + parts_silence_nan(a, s); } return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ bool float32_is_signaling_nan(float32 a_, float_status *status) } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a two-input operation. -| IEEE754 doesn't specify all the details of this, so the -| algorithm is target-specific. -| The routine is passed various bits of information about the -| two NaNs and should return 0 to select NaN a and 1 for NaN b. -| Note that signalling NaNs are always squashed to quiet NaNs -| by the caller, by calling floatXX_silence_nan() before -| returning them. -| -| aIsLargerSignificand is only valid if both a and b are NaNs -| of some kind, and is true if a has the larger significand, -| or if both a and b have the same significand but a is -| positive but b is negative. It is only needed for the x87 -| tie-break rule. -*----------------------------------------------------------------------------*/ - -static int pickNaN(FloatClass a_cls, FloatClass b_cls, - bool aIsLargerSignificand, float_status *status) -{ - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify via set_float_2nan_prop_rule(). - */ - assert(!status->default_nan_mode); - - switch (status->float_2nan_prop_rule) { - case float_2nan_prop_s_ab: - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_s_ba: - if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_ab: - if (is_nan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_ba: - if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_x87: - /* - * This implements x87 NaN propagation rules: - * SNaN + QNaN => return the QNaN - * two SNaNs => return the one with the larger significand, silenced - * two QNaNs => return the one with the larger significand - * SNaN and a non-NaN => return the SNaN, silenced - * QNaN and a non-NaN => return the QNaN - * - * If we get down to comparing significands and they are the same, - * return the NaN with the positive sign bit (if any). - */ - if (is_snan(a_cls)) { - if (is_snan(b_cls)) { - return aIsLargerSignificand ? 0 : 1; - } - return is_qnan(b_cls) ? 1 : 0; - } else if (is_qnan(a_cls)) { - if (is_snan(b_cls) || !is_qnan(b_cls)) { - return 0; - } else { - return aIsLargerSignificand ? 0 : 1; - } - } else { - return 1; - } - default: - g_assert_not_reached(); - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remember if there was an SNaN, and use that to simplify float_2nan_prop_s_{ab,ba} to only the snan component. Then, fall through to the corresponding float_2nan_prop_{ab,ba} case to handle any remaining nans, which must be quiet. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + bool have_snan = false; int cmp, which; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); + have_snan = true; } if (s->default_nan_mode) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: - if (is_snan(a->cls)) { - which = 0; - } else if (is_snan(b->cls)) { - which = 1; - } else if (is_qnan(a->cls)) { - which = 0; - } else { - which = 1; + if (have_snan) { + which = is_snan(a->cls) ? 0 : 1; + break; } - break; - case float_2nan_prop_s_ba: - if (is_snan(b->cls)) { - which = 1; - } else if (is_snan(a->cls)) { - which = 0; - } else if (is_qnan(b->cls)) { - which = 1; - } else { - which = 0; - } - break; + /* fall through */ case float_2nan_prop_ab: which = is_nan(a->cls) ? 0 : 1; break; + case float_2nan_prop_s_ba: + if (have_snan) { + which = is_snan(b->cls) ? 1 : 0; + break; + } + /* fall through */ case float_2nan_prop_ba: which = is_nan(b->cls) ? 1 : 0; break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Move the fractional comparison to the end of the float_2nan_prop_x87 case. This is not required for any other 2nan propagation rule. Reorganize the x87 case itself to break out of the switch when the fractional comparison is not required. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, return a; } - cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } - switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, * return the NaN with the positive sign bit (if any). */ if (is_snan(a->cls)) { - if (is_snan(b->cls)) { - which = cmp > 0 ? 0 : 1; - } else { + if (!is_snan(b->cls)) { which = is_qnan(b->cls) ? 1 : 0; + break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { which = 0; - } else { - which = cmp > 0 ? 0 : 1; + break; } } else { which = 1; + break; } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + which = cmp > 0 ? 0 : 1; break; default: g_assert_not_reached(); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Replace the "index" selecting between A and B with a result variable of the proper type. This improves clarity within the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { bool have_snan = false; - int cmp, which; + FloatPartsN *ret; + int cmp; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { - which = is_snan(a->cls) ? 0 : 1; + ret = is_snan(a->cls) ? a : b; break; } /* fall through */ case float_2nan_prop_ab: - which = is_nan(a->cls) ? 0 : 1; + ret = is_nan(a->cls) ? a : b; break; case float_2nan_prop_s_ba: if (have_snan) { - which = is_snan(b->cls) ? 1 : 0; + ret = is_snan(b->cls) ? b : a; break; } /* fall through */ case float_2nan_prop_ba: - which = is_nan(b->cls) ? 1 : 0; + ret = is_nan(b->cls) ? b : a; break; case float_2nan_prop_x87: /* @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, */ if (is_snan(a->cls)) { if (!is_snan(b->cls)) { - which = is_qnan(b->cls) ? 1 : 0; + ret = is_qnan(b->cls) ? b : a; break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { - which = 0; + ret = a; break; } } else { - which = 1; + ret = b; break; } cmp = frac_cmp(a, b); if (cmp == 0) { cmp = a->sign < b->sign; } - which = cmp > 0 ? 0 : 1; + ret = cmp > 0 ? a : b; break; default: g_assert_not_reached(); } - if (which) { - a = b; + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; } static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> I'm migrating to Qualcomm's new open source email infrastructure, so update my email address, and update the mailmap to match. Signed-off-by: Leif Lindholm <leif.lindholm@oss.qualcomm.com> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241205114047.1125842-1-leif.lindholm@oss.qualcomm.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- .mailmap | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <quic_llindhol@quicinc.com> +R: Leif Lindholm <leif.lindholm@oss.qualcomm.com> R: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> L: qemu-arm@nongnu.org S: Maintained diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> Juan Quintela <quintela@trasno.org> <quintela@redhat.com> -Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> -Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <quic_llindhol@quicinc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif.lindholm@linaro.org> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif@nuviainc.com> Luc Michel <luc@lmichel.fr> <luc.michel@git.antfield.fr> Luc Michel <luc@lmichel.fr> <luc.michel@greensocs.com> Luc Michel <luc@lmichel.fr> <lmichel@kalray.eu> -- 2.34.1 From: Vikram Garhwal <vikram.garhwal@bytedance.com> Previously, maintainer role was paused due to inactive email id. Commit id: c009d715721861984c4987bcc78b7ee183e86d75. Signed-off-by: Vikram Garhwal <vikram.garhwal@bytedance.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20241204184205.12952-1-vikram.garhwal@bytedance.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: tests/qtest/fuzz-sb16-test.c Xilinx CAN M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained F: hw/net/can/xlnx-* F: include/hw/net/xlnx-* @@ -XXX,XX +XXX,XX @@ F: include/hw/rx/ CAN bus subsystem and hardware M: Pavel Pisa <pisa@cmp.felk.cvut.cz> M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained W: https://canbus.pages.fel.cvut.cz/ F: net/can/* -- 2.34.1