[v2] hw/riscv: Fix OT IBEX reset vector

[PATCH v2] hw/riscv: Fix OT IBEX reset vector

Posted by Alexander Wagner 3 years ago

The IBEX documentation [1] specifies the reset vector to be "the most
significant 3 bytes of the boot address and the reset value (0x80) as
the least significant byte".

[1] https://github.com/lowRISC/ibex/blob/master/doc/03_reference/exception_interrupts.rst

Signed-off-by: Alexander Wagner <alexander.wagner@ulal.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---
 hw/riscv/opentitan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index e168bffe69..ca4c1be6f6 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -120,7 +120,7 @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
                             &error_abort);
     object_property_set_int(OBJECT(&s->cpus), "num-harts", ms->smp.cpus,
                             &error_abort);
-    object_property_set_int(OBJECT(&s->cpus), "resetvec", 0x8090, &error_abort);
+    object_property_set_int(OBJECT(&s->cpus), "resetvec", 0x8080, &error_abort);
     sysbus_realize(SYS_BUS_DEVICE(&s->cpus), &error_abort);
 
     /* Boot ROM */
-- 
2.25.1

Re: [PATCH v2] hw/riscv: Fix OT IBEX reset vector

Posted by Alistair Francis 3 years ago

On Tue, Apr 20, 2021 at 6:01 PM Alexander Wagner
<alexander.wagner@ulal.de> wrote:
>
> The IBEX documentation [1] specifies the reset vector to be "the most
> significant 3 bytes of the boot address and the reset value (0x80) as
> the least significant byte".
>
> [1] https://github.com/lowRISC/ibex/blob/master/doc/03_reference/exception_interrupts.rst
>
> Signed-off-by: Alexander Wagner <alexander.wagner@ulal.de>
> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Thanks!

Applied to riscv-to-apply.next

Alistair

> ---
>  hw/riscv/opentitan.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
> index e168bffe69..ca4c1be6f6 100644
> --- a/hw/riscv/opentitan.c
> +++ b/hw/riscv/opentitan.c
> @@ -120,7 +120,7 @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
>                              &error_abort);
>      object_property_set_int(OBJECT(&s->cpus), "num-harts", ms->smp.cpus,
>                              &error_abort);
> -    object_property_set_int(OBJECT(&s->cpus), "resetvec", 0x8090, &error_abort);
> +    object_property_set_int(OBJECT(&s->cpus), "resetvec", 0x8080, &error_abort);
>      sysbus_realize(SYS_BUS_DEVICE(&s->cpus), &error_abort);
>
>      /* Boot ROM */
> --
> 2.25.1
>
>

Re: [PATCH v2] hw/riscv: Fix OT IBEX reset vector

Posted by Alexander Wagner 3 years ago

On 21.04.21 02:00, Alistair Francis wrote:
> On Tue, Apr 20, 2021 at 6:01 PM Alexander Wagner
> <alexander.wagner@ulal.de> wrote:
>> The IBEX documentation [1] specifies the reset vector to be "the most
>> significant 3 bytes of the boot address and the reset value (0x80) as
>> the least significant byte".
>>
>> [1] https://github.com/lowRISC/ibex/blob/master/doc/03_reference/exception_interrupts.rst
>>
>> Signed-off-by: Alexander Wagner <alexander.wagner@ulal.de>
>> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> Thanks!
>
> Applied to riscv-to-apply.next

Perfect, thank you :)

Regards

Alex