The AIL logic is becoming unmanageable spread all over powerpc_excp(),
and it is slated to get even worse with POWER10 support.
Move it all to a new helper function.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
hw/ppc/spapr_hcall.c | 3 +-
target/ppc/cpu.h | 8 --
target/ppc/excp_helper.c | 161 ++++++++++++++++++++------------
target/ppc/translate_init.c.inc | 2 +-
4 files changed, 104 insertions(+), 70 deletions(-)
diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
index 7b5cd3553c..2fbe04a689 100644
--- a/hw/ppc/spapr_hcall.c
+++ b/hw/ppc/spapr_hcall.c
@@ -1395,7 +1395,8 @@ static target_ulong h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu,
return H_P4;
}
- if (mflags == AIL_RESERVED) {
+ if (mflags == 1) {
+ /* AIL=1 is reserved */
return H_UNSUPPORTED_FLAG;
}
diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index e73416da68..5200a16d23 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -2375,14 +2375,6 @@ enum {
HMER_XSCOM_STATUS_MASK = PPC_BITMASK(21, 23),
};
-/* Alternate Interrupt Location (AIL) */
-enum {
- AIL_NONE = 0,
- AIL_RESERVED = 1,
- AIL_0001_8000 = 2,
- AIL_C000_0000_0000_4000 = 3,
-};
-
/*****************************************************************************/
#define is_isa300(ctx) (!!(ctx->insns_flags2 & PPC2_ISA300))
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index b8881c0f85..9ff316767c 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -136,25 +136,107 @@ static int powerpc_reset_wakeup(CPUState *cs, CPUPPCState *env, int excp,
return POWERPC_EXCP_RESET;
}
-static uint64_t ppc_excp_vector_offset(CPUState *cs, int ail)
+/*
+ * AIL - Alternate Interrupt Location, a mode that allows interrupts to be
+ * taken with the MMU on, and which uses an alternate location (e.g., so the
+ * kernel/hv can map the vectors there with an effective address).
+ *
+ * An interrupt is considered to be taken "with AIL" or "AIL applies" if they
+ * are delivered in this way. AIL requires the LPCR to be set to enable this
+ * mode, and a number of conditions have to be true for AIL to apply.
+ *
+ * First of all, SRESET, MCE, and HMI are always delivered without AIL,
+ * because they are specifically want to be in real mode (e.g., MCE might
+ * be signaling a SLB multi-hit which requires SLB flush before the MMU can
+ * be enabled).
+ *
+ * After that, behaviour depends on the current MSR[IR], MSR[DR], MSR[HV], and
+ * whether or not the interrupt changes MSR[HV] from 0 to 1, and the current
+ * radix mode (LPCR[HR]).
+ *
+ * POWER8, POWER9 with LPCR[HR]=0
+ * | LPCR[AIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL |
+ * +-----------+-------------+---------+-------------+-----+
+ * | a | 00/01/10 | x | x | 0 |
+ * | a | 11 | 0 | 1 | 0 |
+ * | a | 11 | 1 | 1 | a |
+ * | a | 11 | 0 | 0 | a |
+ * +-------------------------------------------------------+
+ *
+ * POWER9 with LPCR[HR]=1
+ * | LPCR[AIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL |
+ * +-----------+-------------+---------+-------------+-----+
+ * | a | 00/01/10 | x | x | 0 |
+ * | a | 11 | x | x | a |
+ * +-------------------------------------------------------+
+ *
+ * The difference with POWER9 being that MSR[HV] 0->1 interrupts can be
+ * sent to the hypervisor in AIL mode if the guest is radix (LPCR[HR]=1).
+ */
+static inline void ppc_excp_apply_ail(PowerPCCPU *cpu, int excp_model, int excp,
+ target_ulong msr,
+ target_ulong *new_msr,
+ target_ulong *vector)
{
- uint64_t offset = 0;
+#if defined(TARGET_PPC64)
+ CPUPPCState *env = &cpu->env;
+ bool mmu_all_on = ((msr >> MSR_IR) & 1) && ((msr >> MSR_DR) & 1);
+ bool hv_escalation = !(msr & MSR_HVB) && (*new_msr & MSR_HVB);
+ int ail = 0;
+
+ if (excp == POWERPC_EXCP_MCHECK ||
+ excp == POWERPC_EXCP_RESET ||
+ excp == POWERPC_EXCP_HV_MAINT) {
+ /* SRESET, MCE, HMI never apply AIL */
+ return;
+ }
- switch (ail) {
- case AIL_NONE:
- break;
- case AIL_0001_8000:
- offset = 0x18000;
- break;
- case AIL_C000_0000_0000_4000:
- offset = 0xc000000000004000ull;
- break;
- default:
- cpu_abort(cs, "Invalid AIL combination %d\n", ail);
- break;
+ if (excp_model == POWERPC_EXCP_POWER8 ||
+ excp_model == POWERPC_EXCP_POWER9) {
+ if (!mmu_all_on) {
+ /* AIL only works if MSR[IR] and MSR[DR] are both enabled. */
+ return;
+ }
+ if (hv_escalation && !(env->spr[SPR_LPCR] & LPCR_HR)) {
+ /*
+ * AIL does not work if there is a MSR[HV] 0->1 transition and the
+ * partition is in HPT mode. For radix guests, such interrupts are
+ * allowed to be delivered to the hypervisor in ail mode.
+ */
+ return;
+ }
+
+ ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT;
+ if (ail != 2 && ail != 3) {
+ /* AIL=1 is reserved */
+ return;
+ }
+ } else {
+ /* Other processors do not support AIL */
+ return;
}
- return offset;
+ /*
+ * AIL applies, so the new MSR gets IR and DR set, and an offset applied
+ * to the new IP.
+ */
+ *new_msr |= (1 << MSR_IR) | (1 << MSR_DR);
+
+ if (excp != POWERPC_EXCP_SYSCALL_VECTORED) {
+ if (ail == 2) {
+ *vector |= 0x0000000000018000ull;
+ } else if (ail == 3) {
+ *vector |= 0xc000000000004000ull;
+ }
+ } else {
+ /* scv AIL is a little different */
+ if (ail == 3) {
+ /* Un-apply the base offset */
+ *vector &= ~0x0000000000017000ull;
+ *vector |= 0xc000000000003000ull;
+ }
+ }
+#endif
}
static inline void powerpc_set_excp_state(PowerPCCPU *cpu,
@@ -197,7 +279,7 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
target_ulong msr, new_msr, vector;
- int srr0, srr1, asrr0, asrr1, lev = -1, ail;
+ int srr0, srr1, asrr0, asrr1, lev = -1;
bool lpes0;
qemu_log_mask(CPU_LOG_INT, "Raise exception at " TARGET_FMT_lx
@@ -238,25 +320,16 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
*
* On anything else, we behave as if LPES0 is 1
* (externals don't alter MSR:HV)
- *
- * AIL is initialized here but can be cleared by
- * selected exceptions
*/
#if defined(TARGET_PPC64)
if (excp_model == POWERPC_EXCP_POWER7 ||
excp_model == POWERPC_EXCP_POWER8 ||
excp_model == POWERPC_EXCP_POWER9) {
lpes0 = !!(env->spr[SPR_LPCR] & LPCR_LPES0);
- if (excp_model != POWERPC_EXCP_POWER7) {
- ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT;
- } else {
- ail = 0;
- }
} else
#endif /* defined(TARGET_PPC64) */
{
lpes0 = true;
- ail = 0;
}
/*
@@ -315,7 +388,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
*/
new_msr |= (target_ulong)MSR_HVB;
}
- ail = 0;
/* machine check exceptions don't have ME set */
new_msr &= ~((target_ulong)1 << MSR_ME);
@@ -519,7 +591,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
"exception %d with no HV support\n", excp);
}
}
- ail = 0;
break;
case POWERPC_EXCP_DSEG: /* Data segment exception */
case POWERPC_EXCP_ISEG: /* Instruction segment exception */
@@ -790,24 +861,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
}
#endif
- /*
- * AIL only works if MSR[IR] and MSR[DR] are both enabled.
- */
- if (!((msr >> MSR_IR) & 1) || !((msr >> MSR_DR) & 1)) {
- ail = 0;
- }
-
- /*
- * AIL does not work if there is a MSR[HV] 0->1 transition and the
- * partition is in HPT mode. For radix guests, such interrupts are
- * allowed to be delivered to the hypervisor in ail mode.
- */
- if ((new_msr & MSR_HVB) && !(msr & MSR_HVB)) {
- if (!(env->spr[SPR_LPCR] & LPCR_HR)) {
- ail = 0;
- }
- }
-
vector = env->excp_vectors[excp];
if (vector == (target_ulong)-1ULL) {
cpu_abort(cs, "Raised an exception without defined vector %d\n",
@@ -848,23 +901,8 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
/* Save MSR */
env->spr[srr1] = msr;
- /* Handle AIL */
- if (ail) {
- new_msr |= (1 << MSR_IR) | (1 << MSR_DR);
- vector |= ppc_excp_vector_offset(cs, ail);
- }
-
#if defined(TARGET_PPC64)
} else {
- /* scv AIL is a little different */
- if (ail) {
- new_msr |= (1 << MSR_IR) | (1 << MSR_DR);
- }
- if (ail == AIL_C000_0000_0000_4000) {
- vector |= 0xc000000000003000ull;
- } else {
- vector |= 0x0000000000017000ull;
- }
vector += lev * 0x20;
env->lr = env->nip;
@@ -872,6 +910,9 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
#endif
}
+ /* This can update new_msr and vector if AIL applies */
+ ppc_excp_apply_ail(cpu, excp_model, excp, msr, &new_msr, &vector);
+
powerpc_set_excp_state(cpu, vector, new_msr);
}
diff --git a/target/ppc/translate_init.c.inc b/target/ppc/translate_init.c.inc
index 70f9b9b150..a82d9ed647 100644
--- a/target/ppc/translate_init.c.inc
+++ b/target/ppc/translate_init.c.inc
@@ -3457,7 +3457,7 @@ static void init_excp_POWER9(CPUPPCState *env)
#if !defined(CONFIG_USER_ONLY)
env->excp_vectors[POWERPC_EXCP_HVIRT] = 0x00000EA0;
- env->excp_vectors[POWERPC_EXCP_SYSCALL_VECTORED] = 0x00000000;
+ env->excp_vectors[POWERPC_EXCP_SYSCALL_VECTORED] = 0x00017000;
#endif
}
--
2.23.0
On 4/14/21 5:23 AM, Nicholas Piggin wrote:
> The AIL logic is becoming unmanageable spread all over powerpc_excp(),
> and it is slated to get even worse with POWER10 support.
>
> Move it all to a new helper function.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Thanks for the effort and the documentation. One minor comment below,
C.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
> hw/ppc/spapr_hcall.c | 3 +-
> target/ppc/cpu.h | 8 --
> target/ppc/excp_helper.c | 161 ++++++++++++++++++++------------
> target/ppc/translate_init.c.inc | 2 +-
> 4 files changed, 104 insertions(+), 70 deletions(-)
>
> diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
> index 7b5cd3553c..2fbe04a689 100644
> --- a/hw/ppc/spapr_hcall.c
> +++ b/hw/ppc/spapr_hcall.c
> @@ -1395,7 +1395,8 @@ static target_ulong h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu,
> return H_P4;
> }
>
> - if (mflags == AIL_RESERVED) {
> + if (mflags == 1) {
> + /* AIL=1 is reserved */
> return H_UNSUPPORTED_FLAG;
> }
>
> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> index e73416da68..5200a16d23 100644
> --- a/target/ppc/cpu.h
> +++ b/target/ppc/cpu.h
> @@ -2375,14 +2375,6 @@ enum {
> HMER_XSCOM_STATUS_MASK = PPC_BITMASK(21, 23),
> };
>
> -/* Alternate Interrupt Location (AIL) */
> -enum {
> - AIL_NONE = 0,
> - AIL_RESERVED = 1,
> - AIL_0001_8000 = 2,
> - AIL_C000_0000_0000_4000 = 3,
> -};
I kind of like these. No big deal.
> -
> /*****************************************************************************/
>
> #define is_isa300(ctx) (!!(ctx->insns_flags2 & PPC2_ISA300))
> diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
> index b8881c0f85..9ff316767c 100644
> --- a/target/ppc/excp_helper.c
> +++ b/target/ppc/excp_helper.c
> @@ -136,25 +136,107 @@ static int powerpc_reset_wakeup(CPUState *cs, CPUPPCState *env, int excp,
> return POWERPC_EXCP_RESET;
> }
>
> -static uint64_t ppc_excp_vector_offset(CPUState *cs, int ail)
> +/*
> + * AIL - Alternate Interrupt Location, a mode that allows interrupts to be
> + * taken with the MMU on, and which uses an alternate location (e.g., so the
> + * kernel/hv can map the vectors there with an effective address).
> + *
> + * An interrupt is considered to be taken "with AIL" or "AIL applies" if they
> + * are delivered in this way. AIL requires the LPCR to be set to enable this
> + * mode, and a number of conditions have to be true for AIL to apply.
> + *
> + * First of all, SRESET, MCE, and HMI are always delivered without AIL,
> + * because they are specifically want to be in real mode (e.g., MCE might
> + * be signaling a SLB multi-hit which requires SLB flush before the MMU can
> + * be enabled).
> + *
> + * After that, behaviour depends on the current MSR[IR], MSR[DR], MSR[HV], and
> + * whether or not the interrupt changes MSR[HV] from 0 to 1, and the current
> + * radix mode (LPCR[HR]).
> + *
> + * POWER8, POWER9 with LPCR[HR]=0
> + * | LPCR[AIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL |
> + * +-----------+-------------+---------+-------------+-----+
> + * | a | 00/01/10 | x | x | 0 |
> + * | a | 11 | 0 | 1 | 0 |
> + * | a | 11 | 1 | 1 | a |
> + * | a | 11 | 0 | 0 | a |
> + * +-------------------------------------------------------+
> + *
> + * POWER9 with LPCR[HR]=1
> + * | LPCR[AIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL |
> + * +-----------+-------------+---------+-------------+-----+
> + * | a | 00/01/10 | x | x | 0 |
> + * | a | 11 | x | x | a |
> + * +-------------------------------------------------------+
> + *
> + * The difference with POWER9 being that MSR[HV] 0->1 interrupts can be
> + * sent to the hypervisor in AIL mode if the guest is radix (LPCR[HR]=1).
> + */
> +static inline void ppc_excp_apply_ail(PowerPCCPU *cpu, int excp_model, int excp,
> + target_ulong msr,
> + target_ulong *new_msr,
> + target_ulong *vector)
> {
> - uint64_t offset = 0;
> +#if defined(TARGET_PPC64)
> + CPUPPCState *env = &cpu->env;
> + bool mmu_all_on = ((msr >> MSR_IR) & 1) && ((msr >> MSR_DR) & 1);
> + bool hv_escalation = !(msr & MSR_HVB) && (*new_msr & MSR_HVB);
> + int ail = 0;
> +
> + if (excp == POWERPC_EXCP_MCHECK ||
> + excp == POWERPC_EXCP_RESET ||
> + excp == POWERPC_EXCP_HV_MAINT) {
> + /* SRESET, MCE, HMI never apply AIL */
> + return;
> + }
>
> - switch (ail) {
> - case AIL_NONE:
> - break;
> - case AIL_0001_8000:
> - offset = 0x18000;
> - break;
> - case AIL_C000_0000_0000_4000:
> - offset = 0xc000000000004000ull;
> - break;
> - default:
> - cpu_abort(cs, "Invalid AIL combination %d\n", ail);
Could we keep this abort ?
> - break;
> + if (excp_model == POWERPC_EXCP_POWER8 ||
> + excp_model == POWERPC_EXCP_POWER9) {
> + if (!mmu_all_on) {
> + /* AIL only works if MSR[IR] and MSR[DR] are both enabled. */
> + return;
> + }
> + if (hv_escalation && !(env->spr[SPR_LPCR] & LPCR_HR)) {
> + /*
> + * AIL does not work if there is a MSR[HV] 0->1 transition and the
> + * partition is in HPT mode. For radix guests, such interrupts are
> + * allowed to be delivered to the hypervisor in ail mode.
> + */
> + return;
> + }
> +
> + ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT;
> + if (ail != 2 && ail != 3) {
> + /* AIL=1 is reserved */
> + return;
> + }
> + } else {
> + /* Other processors do not support AIL */
> + return;
> }
>
> - return offset;
> + /*
> + * AIL applies, so the new MSR gets IR and DR set, and an offset applied
> + * to the new IP.
> + */
> + *new_msr |= (1 << MSR_IR) | (1 << MSR_DR);
> +
> + if (excp != POWERPC_EXCP_SYSCALL_VECTORED) {
> + if (ail == 2) {
> + *vector |= 0x0000000000018000ull;
> + } else if (ail == 3) {
> + *vector |= 0xc000000000004000ull;
> + }
> + } else {
> + /* scv AIL is a little different */
> + if (ail == 3) {
> + /* Un-apply the base offset */
> + *vector &= ~0x0000000000017000ull;
> + *vector |= 0xc000000000003000ull;
> + }
> + }
> +#endif
> }
>
> static inline void powerpc_set_excp_state(PowerPCCPU *cpu,
> @@ -197,7 +279,7 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
> CPUState *cs = CPU(cpu);
> CPUPPCState *env = &cpu->env;
> target_ulong msr, new_msr, vector;
> - int srr0, srr1, asrr0, asrr1, lev = -1, ail;
> + int srr0, srr1, asrr0, asrr1, lev = -1;
> bool lpes0;
>
> qemu_log_mask(CPU_LOG_INT, "Raise exception at " TARGET_FMT_lx
> @@ -238,25 +320,16 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
> *
> * On anything else, we behave as if LPES0 is 1
> * (externals don't alter MSR:HV)
> - *
> - * AIL is initialized here but can be cleared by
> - * selected exceptions
> */
> #if defined(TARGET_PPC64)
> if (excp_model == POWERPC_EXCP_POWER7 ||
> excp_model == POWERPC_EXCP_POWER8 ||
> excp_model == POWERPC_EXCP_POWER9) {
> lpes0 = !!(env->spr[SPR_LPCR] & LPCR_LPES0);
> - if (excp_model != POWERPC_EXCP_POWER7) {
> - ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT;
> - } else {
> - ail = 0;
> - }
> } else
> #endif /* defined(TARGET_PPC64) */
> {
> lpes0 = true;
> - ail = 0;
> }
>
> /*
> @@ -315,7 +388,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
> */
> new_msr |= (target_ulong)MSR_HVB;
> }
> - ail = 0;
>
> /* machine check exceptions don't have ME set */
> new_msr &= ~((target_ulong)1 << MSR_ME);
> @@ -519,7 +591,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
> "exception %d with no HV support\n", excp);
> }
> }
> - ail = 0;
> break;
> case POWERPC_EXCP_DSEG: /* Data segment exception */
> case POWERPC_EXCP_ISEG: /* Instruction segment exception */
> @@ -790,24 +861,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
> }
> #endif
>
> - /*
> - * AIL only works if MSR[IR] and MSR[DR] are both enabled.
> - */
> - if (!((msr >> MSR_IR) & 1) || !((msr >> MSR_DR) & 1)) {
> - ail = 0;
> - }
> -
> - /*
> - * AIL does not work if there is a MSR[HV] 0->1 transition and the
> - * partition is in HPT mode. For radix guests, such interrupts are
> - * allowed to be delivered to the hypervisor in ail mode.
> - */
> - if ((new_msr & MSR_HVB) && !(msr & MSR_HVB)) {
> - if (!(env->spr[SPR_LPCR] & LPCR_HR)) {
> - ail = 0;
> - }
> - }
> -
> vector = env->excp_vectors[excp];
> if (vector == (target_ulong)-1ULL) {
> cpu_abort(cs, "Raised an exception without defined vector %d\n",
> @@ -848,23 +901,8 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
> /* Save MSR */
> env->spr[srr1] = msr;
>
> - /* Handle AIL */
> - if (ail) {
> - new_msr |= (1 << MSR_IR) | (1 << MSR_DR);
> - vector |= ppc_excp_vector_offset(cs, ail);
> - }
> -
> #if defined(TARGET_PPC64)
> } else {
> - /* scv AIL is a little different */
> - if (ail) {
> - new_msr |= (1 << MSR_IR) | (1 << MSR_DR);
> - }
> - if (ail == AIL_C000_0000_0000_4000) {
> - vector |= 0xc000000000003000ull;
> - } else {
> - vector |= 0x0000000000017000ull;
> - }
> vector += lev * 0x20;
>
> env->lr = env->nip;
> @@ -872,6 +910,9 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
> #endif
> }
>
> + /* This can update new_msr and vector if AIL applies */
> + ppc_excp_apply_ail(cpu, excp_model, excp, msr, &new_msr, &vector);
> +
> powerpc_set_excp_state(cpu, vector, new_msr);
> }
>
> diff --git a/target/ppc/translate_init.c.inc b/target/ppc/translate_init.c.inc
> index 70f9b9b150..a82d9ed647 100644
> --- a/target/ppc/translate_init.c.inc
> +++ b/target/ppc/translate_init.c.inc
> @@ -3457,7 +3457,7 @@ static void init_excp_POWER9(CPUPPCState *env)
>
> #if !defined(CONFIG_USER_ONLY)
> env->excp_vectors[POWERPC_EXCP_HVIRT] = 0x00000EA0;
> - env->excp_vectors[POWERPC_EXCP_SYSCALL_VECTORED] = 0x00000000;
> + env->excp_vectors[POWERPC_EXCP_SYSCALL_VECTORED] = 0x00017000;
> #endif
> }
>
Excerpts from Cédric Le Goater's message of April 15, 2021 1:24 am:
> On 4/14/21 5:23 AM, Nicholas Piggin wrote:
>> The AIL logic is becoming unmanageable spread all over powerpc_excp(),
>> and it is slated to get even worse with POWER10 support.
>>
>> Move it all to a new helper function.
>
> Reviewed-by: Cédric Le Goater <clg@kaod.org>
> Tested-by: Cédric Le Goater <clg@kaod.org>
>
> Thanks for the effort and the documentation. One minor comment below,
>
> C.
>
>>
>> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
>> ---
>> hw/ppc/spapr_hcall.c | 3 +-
>> target/ppc/cpu.h | 8 --
>> target/ppc/excp_helper.c | 161 ++++++++++++++++++++------------
>> target/ppc/translate_init.c.inc | 2 +-
>> 4 files changed, 104 insertions(+), 70 deletions(-)
>>
>> diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
>> index 7b5cd3553c..2fbe04a689 100644
>> --- a/hw/ppc/spapr_hcall.c
>> +++ b/hw/ppc/spapr_hcall.c
>> @@ -1395,7 +1395,8 @@ static target_ulong h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu,
>> return H_P4;
>> }
>>
>> - if (mflags == AIL_RESERVED) {
>> + if (mflags == 1) {
>> + /* AIL=1 is reserved */
>> return H_UNSUPPORTED_FLAG;
>> }
>>
>> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
>> index e73416da68..5200a16d23 100644
>> --- a/target/ppc/cpu.h
>> +++ b/target/ppc/cpu.h
>> @@ -2375,14 +2375,6 @@ enum {
>> HMER_XSCOM_STATUS_MASK = PPC_BITMASK(21, 23),
>> };
>>
>> -/* Alternate Interrupt Location (AIL) */
>> -enum {
>> - AIL_NONE = 0,
>> - AIL_RESERVED = 1,
>> - AIL_0001_8000 = 2,
>> - AIL_C000_0000_0000_4000 = 3,
>> -};
>
> I kind of like these. No big deal.
My thinking was they actually are just a POWER8 model of the AIL bits
(e.g., they don't represent scv properly or AIL=2 reserved in P10), and
they spread the meaning over multiple files. After this patch it's all
just in that single function.
>>
>> - switch (ail) {
>> - case AIL_NONE:
>> - break;
>> - case AIL_0001_8000:
>> - offset = 0x18000;
>> - break;
>> - case AIL_C000_0000_0000_4000:
>> - offset = 0xc000000000004000ull;
>> - break;
>> - default:
>> - cpu_abort(cs, "Invalid AIL combination %d\n", ail);
>
> Could we keep this abort ?
Well the abort is no longer there because we explicitly handle all
cases, the reserved ones by just ignoring them. I don't know what
the hardware actually does if you tried to set it (it should ignore)
but I think this is nicer to not abort.
Thanks,
Nick
© 2016 - 2026 Red Hat, Inc.