[PATCH v3 27/42] esp: fix PDMA target selection

Mark Cave-Ayland posted 42 patches 3 years, 7 months ago
Maintainers: Laurent Vivier <laurent@vivier.eu>, Fam Zheng <fam@euphon.net>, Michael Tokarev <mjt@tls.msk.ru>, Paolo Bonzini <pbonzini@redhat.com>
[PATCH v3 27/42] esp: fix PDMA target selection
Posted by Mark Cave-Ayland 3 years, 7 months ago
Currently the target selection for PDMA is done after the SCSI command has been
delivered which is not correct. Perform target selection as part of the initial
get_cmd() call when the command is submitted: if no target is present, don't
raise DRQ.

If the target is present then switch to the command phase since the MacOS toolbox
ROM checks for this before attempting to submit the SCSI command.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
---
 hw/scsi/esp.c | 53 +++++++++++++++++++++++++++++++++------------------
 1 file changed, 34 insertions(+), 19 deletions(-)

diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index d8d7ede00a..10e63d1f62 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -243,6 +243,9 @@ static uint32_t get_cmd(ESPState *s)
             s->dma_memory_read(s->dma_opaque, buf, dmalen);
         } else {
             set_pdma(s, TI);
+            if (esp_select(s) < 0) {
+                return -1;
+            }
             esp_raise_drq(s);
             return 0;
         }
@@ -257,7 +260,7 @@ static uint32_t get_cmd(ESPState *s)
     trace_esp_get_cmd(dmalen, target);
 
     if (esp_select(s) < 0) {
-        return 0;
+        return -1;
     }
     return dmalen;
 }
@@ -299,9 +302,6 @@ static void do_cmd(ESPState *s)
 
 static void satn_pdma_cb(ESPState *s)
 {
-    if (esp_select(s) < 0) {
-        return;
-    }
     s->do_cmd = 0;
     if (s->cmdlen) {
         do_cmd(s);
@@ -310,24 +310,28 @@ static void satn_pdma_cb(ESPState *s)
 
 static void handle_satn(ESPState *s)
 {
+    int32_t cmdlen;
+
     if (s->dma && !s->dma_enabled) {
         s->dma_cb = handle_satn;
         return;
     }
     s->pdma_cb = satn_pdma_cb;
-    s->cmdlen = get_cmd(s);
-    if (s->cmdlen) {
+    cmdlen = get_cmd(s);
+    if (cmdlen > 0) {
+        s->cmdlen = cmdlen;
         do_cmd(s);
-    } else {
+    } else if (cmdlen == 0) {
+        s->cmdlen = 0;
         s->do_cmd = 1;
+        /* Target present, but no cmd yet - switch to command phase */
+        s->rregs[ESP_RSEQ] = SEQ_CD;
+        s->rregs[ESP_RSTAT] = STAT_CD;
     }
 }
 
 static void s_without_satn_pdma_cb(ESPState *s)
 {
-    if (esp_select(s) < 0) {
-        return;
-    }
     s->do_cmd = 0;
     if (s->cmdlen) {
         do_busid_cmd(s, s->cmdbuf, 0);
@@ -336,24 +340,28 @@ static void s_without_satn_pdma_cb(ESPState *s)
 
 static void handle_s_without_atn(ESPState *s)
 {
+    int32_t cmdlen;
+
     if (s->dma && !s->dma_enabled) {
         s->dma_cb = handle_s_without_atn;
         return;
     }
     s->pdma_cb = s_without_satn_pdma_cb;
-    s->cmdlen = get_cmd(s);
-    if (s->cmdlen) {
+    cmdlen = get_cmd(s);
+    if (cmdlen > 0) {
+        s->cmdlen = cmdlen;
         do_busid_cmd(s, s->cmdbuf, 0);
-    } else {
+    } else if (cmdlen == 0) {
+        s->cmdlen = 0;
         s->do_cmd = 1;
+        /* Target present, but no cmd yet - switch to command phase */
+        s->rregs[ESP_RSEQ] = SEQ_CD;
+        s->rregs[ESP_RSTAT] = STAT_CD;
     }
 }
 
 static void satn_stop_pdma_cb(ESPState *s)
 {
-    if (esp_select(s) < 0) {
-        return;
-    }
     s->do_cmd = 0;
     if (s->cmdlen) {
         trace_esp_handle_satn_stop(s->cmdlen);
@@ -367,21 +375,28 @@ static void satn_stop_pdma_cb(ESPState *s)
 
 static void handle_satn_stop(ESPState *s)
 {
+    int32_t cmdlen;
+
     if (s->dma && !s->dma_enabled) {
         s->dma_cb = handle_satn_stop;
         return;
     }
     s->pdma_cb = satn_stop_pdma_cb;
-    s->cmdlen = get_cmd(s);
-    if (s->cmdlen) {
+    cmdlen = get_cmd(s);
+    if (cmdlen > 0) {
         trace_esp_handle_satn_stop(s->cmdlen);
+        s->cmdlen = cmdlen;
         s->do_cmd = 1;
         s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
         s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
         s->rregs[ESP_RSEQ] = SEQ_CD;
         esp_raise_irq(s);
-    } else {
+    } else if (cmdlen == 0) {
+        s->cmdlen = 0;
         s->do_cmd = 1;
+        /* Target present, but no cmd yet - switch to command phase */
+        s->rregs[ESP_RSEQ] = SEQ_CD;
+        s->rregs[ESP_RSTAT] = STAT_CD;
     }
 }
 
-- 
2.20.1