hw/arm/smmuv3.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ hw/arm/trace-events | 1 + hw/vfio/common.c | 47 +++++++++++++++++++++++++++++------ 3 files changed, 100 insertions(+), 8 deletions(-)
Hi all, Since the SMMUv3's nested translation stages[1] has been introduced by Eric, we need to pay attention to the migration of VFIO PCI devices in SMMUv3 nested stage mode. At present, it is not yet supported in QEMU. There are two problems in the existing framework. First, the current way to get dirty pages is not applicable to nested stage mode. Because of the "Caching Mode", VTD can map the RAM through the host single stage (giova->hpa). "vfio_listener_log_sync" gets dirty pages by transferring "giova" to the kernel for the RAM block section of mapped MMIO region. In nested stage mode, we setup the stage 2 (gpa->hpa) and the stage 1(giova->gpa) separately. So it is inapplicable to get dirty pages by the current way in nested stage mode. Second, it also need to pass stage 1 configurations to the destination host after the migration. In Eric's patch, it passes the stage 1 configuration to the host on each STE update for the devices set the PASID PciOps. The configuration will be applied at physical level. But the data of physical level will not be sent to the destination host. So we have to pass stage 1 configurations to the destination host after the migration. This Patch set includes patches as below: Patch 1-2: - Refactor the vfio_listener_log_sync and added a new function to get dirty pages in nested stage mode. Patch 3: - Added the post_load function to vmstate_smmuv3 for passing stage 1 configuration to the destination host after the migration. @Eric, Could you please add this Patch set to your future version of "vSMMUv3/pSMMUv3 2 stage VFIO integration", if you think this Patch set makes sense? :) Best Regards Kunkun Jiang [1] [RFC,v7,00/26] vSMMUv3/pSMMUv3 2 stage VFIO integration http://patchwork.ozlabs.org/project/qemu-devel/cover/20201116181349.11908-1-eric.auger@redhat.com/ Kunkun Jiang (3): vfio: Introduce helpers to mark dirty pages of a RAM section vfio: Add vfio_prereg_listener_log_sync in nested stage hw/arm/smmuv3: Post-load stage 1 configurations to the host hw/arm/smmuv3.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ hw/arm/trace-events | 1 + hw/vfio/common.c | 47 +++++++++++++++++++++++++++++------ 3 files changed, 100 insertions(+), 8 deletions(-) -- 2.23.0
kindly ping, Any comments and reviews are welcome. Thanks. Kunkun Jiang. On 2021/2/19 17:42, Kunkun Jiang wrote: > Hi all, > > Since the SMMUv3's nested translation stages[1] has been introduced by Eric, we > need to pay attention to the migration of VFIO PCI devices in SMMUv3 nested stage > mode. At present, it is not yet supported in QEMU. There are two problems in the > existing framework. > > First, the current way to get dirty pages is not applicable to nested stage mode. > Because of the "Caching Mode", VTD can map the RAM through the host single stage > (giova->hpa). "vfio_listener_log_sync" gets dirty pages by transferring "giova" > to the kernel for the RAM block section of mapped MMIO region. In nested stage > mode, we setup the stage 2 (gpa->hpa) and the stage 1(giova->gpa) separately. So > it is inapplicable to get dirty pages by the current way in nested stage mode. > > Second, it also need to pass stage 1 configurations to the destination host after > the migration. In Eric's patch, it passes the stage 1 configuration to the host on > each STE update for the devices set the PASID PciOps. The configuration will be > applied at physical level. But the data of physical level will not be sent to the > destination host. So we have to pass stage 1 configurations to the destination > host after the migration. > > This Patch set includes patches as below: > Patch 1-2: > - Refactor the vfio_listener_log_sync and added a new function to get dirty pages > in nested stage mode. > > Patch 3: > - Added the post_load function to vmstate_smmuv3 for passing stage 1 configuration > to the destination host after the migration. > > @Eric, Could you please add this Patch set to your future version of > "vSMMUv3/pSMMUv3 2 stage VFIO integration", if you think this Patch set makes sense? :) > > Best Regards > Kunkun Jiang > > [1] [RFC,v7,00/26] vSMMUv3/pSMMUv3 2 stage VFIO integration > http://patchwork.ozlabs.org/project/qemu-devel/cover/20201116181349.11908-1-eric.auger@redhat.com/ > > Kunkun Jiang (3): > vfio: Introduce helpers to mark dirty pages of a RAM section > vfio: Add vfio_prereg_listener_log_sync in nested stage > hw/arm/smmuv3: Post-load stage 1 configurations to the host > > hw/arm/smmuv3.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ > hw/arm/trace-events | 1 + > hw/vfio/common.c | 47 +++++++++++++++++++++++++++++------ > 3 files changed, 100 insertions(+), 8 deletions(-) >
Hi Kunkun, On 2/19/21 10:42 AM, Kunkun Jiang wrote: > Hi all, > > Since the SMMUv3's nested translation stages[1] has been introduced by Eric, we > need to pay attention to the migration of VFIO PCI devices in SMMUv3 nested stage > mode. At present, it is not yet supported in QEMU. There are two problems in the > existing framework. > > First, the current way to get dirty pages is not applicable to nested stage mode. > Because of the "Caching Mode", VTD can map the RAM through the host single stage > (giova->hpa). "vfio_listener_log_sync" gets dirty pages by transferring "giova" > to the kernel for the RAM block section of mapped MMIO region. In nested stage > mode, we setup the stage 2 (gpa->hpa) and the stage 1(giova->gpa) separately. So > it is inapplicable to get dirty pages by the current way in nested stage mode. > > Second, it also need to pass stage 1 configurations to the destination host after > the migration. In Eric's patch, it passes the stage 1 configuration to the host on > each STE update for the devices set the PASID PciOps. The configuration will be > applied at physical level. But the data of physical level will not be sent to the > destination host. So we have to pass stage 1 configurations to the destination > host after the migration. > > This Patch set includes patches as below: > Patch 1-2: > - Refactor the vfio_listener_log_sync and added a new function to get dirty pages > in nested stage mode. > > Patch 3: > - Added the post_load function to vmstate_smmuv3 for passing stage 1 configuration > to the destination host after the migration. > > @Eric, Could you please add this Patch set to your future version of > "vSMMUv3/pSMMUv3 2 stage VFIO integration", if you think this Patch set makes sense? :) First of all, thank you for working on this. As you may have noticed I sent a new RFC version yesterday (without including this). When time allows, you may have a look at the comments I posted on your series. I don't think I can test it at the moment so I may prefer to keep it separate. Also be aware that the QEMU integration of nested has not received much comments yet and is likely to evolve. The priority is to get some R-b's on the kernel pieces, especially the SMMU part. With this dependency resolved, things can't move forward I am afraid. Thanks Eric > > Best Regards > Kunkun Jiang > > [1] [RFC,v7,00/26] vSMMUv3/pSMMUv3 2 stage VFIO integration > http://patchwork.ozlabs.org/project/qemu-devel/cover/20201116181349.11908-1-eric.auger@redhat.com/ > > Kunkun Jiang (3): > vfio: Introduce helpers to mark dirty pages of a RAM section > vfio: Add vfio_prereg_listener_log_sync in nested stage > hw/arm/smmuv3: Post-load stage 1 configurations to the host > > hw/arm/smmuv3.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ > hw/arm/trace-events | 1 + > hw/vfio/common.c | 47 +++++++++++++++++++++++++++++------ > 3 files changed, 100 insertions(+), 8 deletions(-) >
Hi Eric, On 2021/4/12 16:40, Auger Eric wrote: > Hi Kunkun, > > On 2/19/21 10:42 AM, Kunkun Jiang wrote: >> Hi all, >> >> Since the SMMUv3's nested translation stages[1] has been introduced by Eric, we >> need to pay attention to the migration of VFIO PCI devices in SMMUv3 nested stage >> mode. At present, it is not yet supported in QEMU. There are two problems in the >> existing framework. >> >> First, the current way to get dirty pages is not applicable to nested stage mode. >> Because of the "Caching Mode", VTD can map the RAM through the host single stage >> (giova->hpa). "vfio_listener_log_sync" gets dirty pages by transferring "giova" >> to the kernel for the RAM block section of mapped MMIO region. In nested stage >> mode, we setup the stage 2 (gpa->hpa) and the stage 1(giova->gpa) separately. So >> it is inapplicable to get dirty pages by the current way in nested stage mode. >> >> Second, it also need to pass stage 1 configurations to the destination host after >> the migration. In Eric's patch, it passes the stage 1 configuration to the host on >> each STE update for the devices set the PASID PciOps. The configuration will be >> applied at physical level. But the data of physical level will not be sent to the >> destination host. So we have to pass stage 1 configurations to the destination >> host after the migration. >> >> This Patch set includes patches as below: >> Patch 1-2: >> - Refactor the vfio_listener_log_sync and added a new function to get dirty pages >> in nested stage mode. >> >> Patch 3: >> - Added the post_load function to vmstate_smmuv3 for passing stage 1 configuration >> to the destination host after the migration. >> >> @Eric, Could you please add this Patch set to your future version of >> "vSMMUv3/pSMMUv3 2 stage VFIO integration", if you think this Patch set makes sense? :) > First of all, thank you for working on this. As you may have noticed I > sent a new RFC version yesterday (without including this). When time > allows, you may have a look at the comments I posted on your series. I > don't think I can test it at the moment so I may prefer to keep it > separate. Also be aware that the QEMU integration of nested has not > received much comments yet and is likely to evolve. The priority is to > get some R-b's on the kernel pieces, especially the SMMU part. With this > dependency resolved, things can't move forward I am afraid. > > Thanks > > Eric Yes, I saw your latest version and comments. Thanks again for your review. I will try my best to test your patches and come up with some useful ideas. In the future, this series will be updated with your series of nested. If conditions permit, I hope you can test it and give me some comments. Best regards, Kunkun Jiang >> Best Regards >> Kunkun Jiang >> >> [1] [RFC,v7,00/26] vSMMUv3/pSMMUv3 2 stage VFIO integration >> http://patchwork.ozlabs.org/project/qemu-devel/cover/20201116181349.11908-1-eric.auger@redhat.com/ >> >> Kunkun Jiang (3): >> vfio: Introduce helpers to mark dirty pages of a RAM section >> vfio: Add vfio_prereg_listener_log_sync in nested stage >> hw/arm/smmuv3: Post-load stage 1 configurations to the host >> >> hw/arm/smmuv3.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ >> hw/arm/trace-events | 1 + >> hw/vfio/common.c | 47 +++++++++++++++++++++++++++++------ >> 3 files changed, 100 insertions(+), 8 deletions(-) >> > .
© 2016 - 2024 Red Hat, Inc.