The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 Hi; here's the first arm pullreq for 9.1. This includes the reset method function signature change, so it has some chance of compile failures due to merge conflicts if some other pullreq added a device reset method and that pullreq got applied before this one. If so, the changes needed to fix those up can be created by running the spatch rune described in the commit message of the "hw, target: Add ResetType argument to hold and exit phase methods" commit. thanks -- PMM The following changes since commit 5da72194df36535d773c8bdc951529ecd5e31707: Merge tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu into staging (2024-04-24 15:51:49 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240425 for you to fetch changes up to 214652da123e3821657a64691ee556281e9f6238: tests/qtest: Add tests for the STM32L4x5 USART (2024-04-25 10:21:59 +0100) ---------------------------------------------------------------- target-arm queue: * Implement FEAT_NMI and NMI support in the GICv3 * hw/dma: avoid apparent overflow in soc_dma_set_request * linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code * Add ResetType argument to Resettable hold and exit phase methods * Add RESET_TYPE_SNAPSHOT_LOAD ResetType * Implement STM32L4x5 USART ---------------------------------------------------------------- Anastasia Belova (1): hw/dma: avoid apparent overflow in soc_dma_set_request Arnaud Minier (5): hw/char: Implement STM32L4x5 USART skeleton hw/char/stm32l4x5_usart: Enable serial read and write hw/char/stm32l4x5_usart: Add options for serial parameters setting hw/arm: Add the USART to the stm32l4x5 SoC tests/qtest: Add tests for the STM32L4x5 USART Jinjie Ruan (22): target/arm: Handle HCR_EL2 accesses for bits introduced with FEAT_NMI target/arm: Add PSTATE.ALLINT target/arm: Add support for FEAT_NMI, Non-maskable Interrupt target/arm: Implement ALLINT MSR (immediate) target/arm: Support MSR access to ALLINT target/arm: Add support for Non-maskable Interrupt target/arm: Add support for NMI in arm_phys_excp_target_el() target/arm: Handle IS/FS in ISR_EL1 for NMI, VINMI and VFNMI target/arm: Handle PSTATE.ALLINT on taking an exception hw/intc/arm_gicv3: Add external IRQ lines for NMI hw/arm/virt: Wire NMI and VINMI irq lines from GIC to CPU target/arm: Handle NMI in arm_cpu_do_interrupt_aarch64() hw/intc/arm_gicv3: Add has-nmi property to GICv3 device hw/intc/arm_gicv3_kvm: Not set has-nmi=true for the KVM GICv3 hw/intc/arm_gicv3: Add irq non-maskable property hw/intc/arm_gicv3_redist: Implement GICR_INMIR0 hw/intc/arm_gicv3: Implement GICD_INMIR hw/intc/arm_gicv3: Implement NMI interrupt priority hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update() hw/intc/arm_gicv3: Report the VINMI interrupt target/arm: Add FEAT_NMI to max hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI Peter Maydell (9): hw/intc/arm_gicv3: Add NMI handling CPU interface registers hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read() linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset scripts/coccinelle: New script to add ResetType to hold and exit phases hw, target: Add ResetType argument to hold and exit phase methods docs/devel/reset: Update to new API for hold and exit phase methods reset: Add RESET_TYPE_SNAPSHOT_LOAD MAINTAINERS | 1 + docs/devel/reset.rst | 25 +- docs/system/arm/b-l475e-iot01a.rst | 2 +- docs/system/arm/emulation.rst | 1 + scripts/coccinelle/reset-type.cocci | 133 ++++++++ hw/intc/gicv3_internal.h | 13 + include/hw/arm/stm32l4x5_soc.h | 7 + include/hw/char/stm32l4x5_usart.h | 67 ++++ include/hw/intc/arm_gic_common.h | 2 + include/hw/intc/arm_gicv3_common.h | 14 + include/hw/resettable.h | 5 +- linux-user/flat.h | 5 +- target/arm/cpu-features.h | 5 + target/arm/cpu-qom.h | 5 +- target/arm/cpu.h | 9 + target/arm/internals.h | 21 ++ target/arm/tcg/helper-a64.h | 1 + target/arm/tcg/a64.decode | 1 + hw/adc/npcm7xx_adc.c | 2 +- hw/arm/pxa2xx_pic.c | 2 +- hw/arm/smmu-common.c | 2 +- hw/arm/smmuv3.c | 4 +- hw/arm/stellaris.c | 10 +- hw/arm/stm32l4x5_soc.c | 83 ++++- hw/arm/virt.c | 29 +- hw/audio/asc.c | 2 +- hw/char/cadence_uart.c | 2 +- hw/char/sifive_uart.c | 2 +- hw/char/stm32l4x5_usart.c | 637 ++++++++++++++++++++++++++++++++++++ hw/core/cpu-common.c | 2 +- hw/core/qdev.c | 4 +- hw/core/reset.c | 17 +- hw/core/resettable.c | 8 +- hw/display/virtio-vga.c | 4 +- hw/dma/soc_dma.c | 4 +- hw/gpio/npcm7xx_gpio.c | 2 +- hw/gpio/pl061.c | 2 +- hw/gpio/stm32l4x5_gpio.c | 2 +- hw/hyperv/vmbus.c | 2 +- hw/i2c/allwinner-i2c.c | 5 +- hw/i2c/npcm7xx_smbus.c | 2 +- hw/input/adb.c | 2 +- hw/input/ps2.c | 12 +- hw/intc/arm_gic_common.c | 2 +- hw/intc/arm_gic_kvm.c | 4 +- hw/intc/arm_gicv3.c | 67 +++- hw/intc/arm_gicv3_common.c | 50 ++- hw/intc/arm_gicv3_cpuif.c | 268 ++++++++++++++- hw/intc/arm_gicv3_dist.c | 36 ++ hw/intc/arm_gicv3_its.c | 4 +- hw/intc/arm_gicv3_its_common.c | 2 +- hw/intc/arm_gicv3_its_kvm.c | 4 +- hw/intc/arm_gicv3_kvm.c | 9 +- hw/intc/arm_gicv3_redist.c | 22 ++ hw/intc/xics.c | 2 +- hw/m68k/q800-glue.c | 2 +- hw/misc/djmemc.c | 2 +- hw/misc/iosb.c | 2 +- hw/misc/mac_via.c | 8 +- hw/misc/macio/cuda.c | 4 +- hw/misc/macio/pmu.c | 4 +- hw/misc/mos6522.c | 2 +- hw/misc/npcm7xx_clk.c | 13 +- hw/misc/npcm7xx_gcr.c | 12 +- hw/misc/npcm7xx_mft.c | 2 +- hw/misc/npcm7xx_pwm.c | 2 +- hw/misc/stm32l4x5_exti.c | 2 +- hw/misc/stm32l4x5_rcc.c | 10 +- hw/misc/stm32l4x5_syscfg.c | 2 +- hw/misc/xlnx-versal-cframe-reg.c | 2 +- hw/misc/xlnx-versal-crl.c | 2 +- hw/misc/xlnx-versal-pmc-iou-slcr.c | 2 +- hw/misc/xlnx-versal-trng.c | 2 +- hw/misc/xlnx-versal-xramc.c | 2 +- hw/misc/xlnx-zynqmp-apu-ctrl.c | 2 +- hw/misc/xlnx-zynqmp-crf.c | 2 +- hw/misc/zynq_slcr.c | 4 +- hw/net/can/xlnx-zynqmp-can.c | 2 +- hw/net/e1000.c | 2 +- hw/net/e1000e.c | 2 +- hw/net/igb.c | 2 +- hw/net/igbvf.c | 2 +- hw/nvram/xlnx-bbram.c | 2 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 2 +- hw/nvram/xlnx-zynqmp-efuse.c | 2 +- hw/pci-bridge/cxl_root_port.c | 4 +- hw/pci-bridge/pcie_root_port.c | 2 +- hw/pci-host/bonito.c | 2 +- hw/pci-host/pnv_phb.c | 4 +- hw/pci-host/pnv_phb3_msi.c | 4 +- hw/pci/pci.c | 4 +- hw/rtc/mc146818rtc.c | 2 +- hw/s390x/css-bridge.c | 2 +- hw/sensor/adm1266.c | 2 +- hw/sensor/adm1272.c | 4 +- hw/sensor/isl_pmbus_vr.c | 10 +- hw/sensor/max31785.c | 2 +- hw/sensor/max34451.c | 2 +- hw/ssi/npcm7xx_fiu.c | 2 +- hw/timer/etraxfs_timer.c | 2 +- hw/timer/npcm7xx_timer.c | 2 +- hw/usb/hcd-dwc2.c | 8 +- hw/usb/xlnx-versal-usb2-ctrl-regs.c | 2 +- hw/virtio/virtio-pci.c | 2 +- linux-user/flatload.c | 293 +---------------- target/arm/cpu.c | 151 ++++++++- target/arm/helper.c | 101 +++++- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/helper-a64.c | 16 +- target/arm/tcg/translate-a64.c | 19 ++ target/avr/cpu.c | 4 +- target/cris/cpu.c | 4 +- target/hexagon/cpu.c | 4 +- target/i386/cpu.c | 4 +- target/loongarch/cpu.c | 4 +- target/m68k/cpu.c | 4 +- target/microblaze/cpu.c | 4 +- target/mips/cpu.c | 4 +- target/openrisc/cpu.c | 4 +- target/ppc/cpu_init.c | 4 +- target/riscv/cpu.c | 4 +- target/rx/cpu.c | 4 +- target/sh4/cpu.c | 4 +- target/sparc/cpu.c | 4 +- target/tricore/cpu.c | 4 +- target/xtensa/cpu.c | 4 +- tests/qtest/stm32l4x5_usart-test.c | 315 ++++++++++++++++++ hw/arm/Kconfig | 1 + hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 12 + hw/intc/trace-events | 2 + tests/qtest/meson.build | 4 +- 133 files changed, 2239 insertions(+), 537 deletions(-) create mode 100644 scripts/coccinelle/reset-type.cocci create mode 100644 include/hw/char/stm32l4x5_usart.h create mode 100644 hw/char/stm32l4x5_usart.c create mode 100644 tests/qtest/stm32l4x5_usart-test.c From: Jinjie Ruan <ruanjinjie@huawei.com> FEAT_NMI defines another three new bits in HCRX_EL2: TALLINT, HCRX_VINMI and HCRX_VFNMI. When the feature is enabled, allow these bits to be written in HCRX_EL2. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-2-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu-features.h | 5 +++++ target/arm/helper.c | 8 +++++++- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_sme(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SME) != 0; } +static inline bool isar_feature_aa64_nmi(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, NMI) != 0; +} + static inline bool isar_feature_aa64_tgran4_lpa2(const ARMISARegisters *id) { return FIELD_SEX64(id->id_aa64mmfr0, ID_AA64MMFR0, TGRAN4) >= 1; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool el_is_in_host(CPUARMState *env, int el) static void hcrx_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { + ARMCPU *cpu = env_archcpu(env); uint64_t valid_mask = 0; /* FEAT_MOPS adds MSCEn and MCE2 */ - if (cpu_isar_feature(aa64_mops, env_archcpu(env))) { + if (cpu_isar_feature(aa64_mops, cpu)) { valid_mask |= HCRX_MSCEN | HCRX_MCE2; } + /* FEAT_NMI adds TALLINT, VINMI and VFNMI */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + valid_mask |= HCRX_TALLINT | HCRX_VINMI | HCRX_VFNMI; + } + /* Clear RES0 bits. */ env->cp15.hcrx_el2 = value & valid_mask; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> When PSTATE.ALLINT is set, an IRQ or FIQ interrupt that is targeted to ELx, with or without superpriority is masked. As Richard suggested, place ALLINT bit in PSTATE in env->pstate. In the pseudocode, AArch64.ExceptionReturn() calls SetPSTATEFromPSR(), which treats PSTATE.ALLINT as one of the bits which are reinstated from SPSR to PSTATE regardless of whether this is an illegal exception return or not. So handle PSTATE.ALLINT the same way as PSTATE.DAIF in the illegal_return exit path of the exception_return helper. With the change, exception entry and return are automatically handled. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-3-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/tcg/helper-a64.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define PSTATE_D (1U << 9) #define PSTATE_BTYPE (3U << 10) #define PSTATE_SSBS (1U << 12) +#define PSTATE_ALLINT (1U << 13) #define PSTATE_IL (1U << 20) #define PSTATE_SS (1U << 21) #define PSTATE_PAN (1U << 22) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ illegal_return: */ env->pstate |= PSTATE_IL; env->pc = new_pc; - spsr &= PSTATE_NZCV | PSTATE_DAIF; - spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF); + spsr &= PSTATE_NZCV | PSTATE_DAIF | PSTATE_ALLINT; + spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF | PSTATE_ALLINT); pstate_write(env, spsr); if (!arm_singlestep_active(env)) { env->pstate &= ~PSTATE_SS; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add support for FEAT_NMI. NMI (FEAT_NMI) is an mandatory feature in ARMv8.8-A and ARM v9.3-A. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-4-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t aarch64_pstate_valid_mask(const ARMISARegisters *id) if (isar_feature_aa64_mte(id)) { valid |= PSTATE_TCO; } + if (isar_feature_aa64_nmi(id)) { + valid |= PSTATE_ALLINT; + } return valid; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add ALLINT MSR (immediate) to decodetree, in which the CRm is 0b000x. The EL0 check is necessary to ALLINT, and the EL1 check is necessary when imm == 1. So implement it inline for EL2/3, or EL1 with imm==0. Avoid the unconditional write to pc and use raise_exception_ra to unwind. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-5-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.h | 1 + target/arm/tcg/a64.decode | 1 + target/arm/tcg/helper-a64.c | 12 ++++++++++++ target/arm/tcg/translate-a64.c | 19 +++++++++++++++++++ 4 files changed, 33 insertions(+) diff --git a/target/arm/tcg/helper-a64.h b/target/arm/tcg/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.h +++ b/target/arm/tcg/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(rbit64, TCG_CALL_NO_RWG_SE, i64, i64) DEF_HELPER_2(msr_i_spsel, void, env, i32) DEF_HELPER_2(msr_i_daifset, void, env, i32) DEF_HELPER_2(msr_i_daifclear, void, env, i32) +DEF_HELPER_1(msr_set_allint_el1, void, env) DEF_HELPER_3(vfp_cmph_a64, i64, f16, f16, ptr) DEF_HELPER_3(vfp_cmpeh_a64, i64, f16, f16, ptr) DEF_HELPER_3(vfp_cmps_a64, i64, f32, f32, ptr) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ MSR_i_DIT 1101 0101 0000 0 011 0100 .... 010 11111 @msr_i MSR_i_TCO 1101 0101 0000 0 011 0100 .... 100 11111 @msr_i MSR_i_DAIFSET 1101 0101 0000 0 011 0100 .... 110 11111 @msr_i MSR_i_DAIFCLEAR 1101 0101 0000 0 011 0100 .... 111 11111 @msr_i +MSR_i_ALLINT 1101 0101 0000 0 001 0100 000 imm:1 000 11111 MSR_i_SVCR 1101 0101 0000 0 011 0100 0 mask:2 imm:1 011 11111 # MRS, MSR (register), SYS, SYSL. These are all essentially the diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(msr_i_spsel)(CPUARMState *env, uint32_t imm) update_spsel(env, imm); } +void HELPER(msr_set_allint_el1)(CPUARMState *env) +{ + /* ALLINT update to PSTATE. */ + if (arm_hcrx_el2_eff(env) & HCRX_TALLINT) { + raise_exception_ra(env, EXCP_UDEF, + syn_aa64_sysregtrap(0, 1, 0, 4, 1, 0x1f, 0), 2, + GETPC()); + } + + env->pstate |= PSTATE_ALLINT; +} + static void daif_check(CPUARMState *env, uint32_t op, uint32_t imm, uintptr_t ra) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_MSR_i_DAIFCLEAR(DisasContext *s, arg_i *a) return true; } +static bool trans_MSR_i_ALLINT(DisasContext *s, arg_i *a) +{ + if (!dc_isar_feature(aa64_nmi, s) || s->current_el == 0) { + return false; + } + + if (a->imm == 0) { + clear_pstate_bits(PSTATE_ALLINT); + } else if (s->current_el > 1) { + set_pstate_bits(PSTATE_ALLINT); + } else { + gen_helper_msr_set_allint_el1(tcg_env); + } + + /* Exit the cpu loop to re-evaluate pending IRQs. */ + s->base.is_jmp = DISAS_UPDATE_EXIT; + return true; +} + static bool trans_MSR_i_SVCR(DisasContext *s, arg_MSR_i_SVCR *a) { if (!dc_isar_feature(aa64_sme, s) || a->mask == 0) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Support ALLINT msr access as follow: mrs <xt>, ALLINT // read allint msr ALLINT, <xt> // write allint with imm Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-6-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo rme_mte_reginfo[] = { .opc0 = 1, .opc1 = 6, .crn = 7, .crm = 14, .opc2 = 5, .access = PL3_W, .type = ARM_CP_NOP }, }; + +static void aa64_allint_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + env->pstate = (env->pstate & ~PSTATE_ALLINT) | (value & PSTATE_ALLINT); +} + +static uint64_t aa64_allint_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pstate & PSTATE_ALLINT; +} + +static CPAccessResult aa64_allint_access(CPUARMState *env, + const ARMCPRegInfo *ri, bool isread) +{ + if (!isread && arm_current_el(env) == 1 && + (arm_hcrx_el2_eff(env) & HCRX_TALLINT)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo nmi_reginfo[] = { + { .name = "ALLINT", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .opc2 = 0, .crn = 4, .crm = 3, + .type = ARM_CP_NO_RAW, + .access = PL1_RW, .accessfn = aa64_allint_access, + .fieldoffset = offsetof(CPUARMState, pstate), + .writefn = aa64_allint_write, .readfn = aa64_allint_read, + .resetfn = arm_cp_reset_ignore }, +}; #endif /* TARGET_AARCH64 */ static void define_pmu_regs(ARMCPU *cpu) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_nv2, cpu)) { define_arm_cp_regs(cpu, nv2_reginfo); } + + if (cpu_isar_feature(aa64_nmi, cpu)) { + define_arm_cp_regs(cpu, nmi_reginfo); + } #endif if (cpu_isar_feature(any_predinv, cpu)) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> This only implements the external delivery method via the GICv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-7-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu-qom.h | 5 +- target/arm/cpu.h | 6 ++ target/arm/internals.h | 18 +++++ target/arm/cpu.c | 147 ++++++++++++++++++++++++++++++++++++++--- target/arm/helper.c | 33 +++++++-- 5 files changed, 193 insertions(+), 16 deletions(-) diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-qom.h +++ b/target/arm/cpu-qom.h @@ -XXX,XX +XXX,XX @@ DECLARE_CLASS_CHECKERS(AArch64CPUClass, AARCH64_CPU, #define ARM_CPU_TYPE_SUFFIX "-" TYPE_ARM_CPU #define ARM_CPU_TYPE_NAME(name) (name ARM_CPU_TYPE_SUFFIX) -/* Meanings of the ARMCPU object's four inbound GPIO lines */ +/* Meanings of the ARMCPU object's seven inbound GPIO lines */ #define ARM_CPU_IRQ 0 #define ARM_CPU_FIQ 1 #define ARM_CPU_VIRQ 2 #define ARM_CPU_VFIQ 3 +#define ARM_CPU_NMI 4 +#define ARM_CPU_VINMI 5 +#define ARM_CPU_VFNMI 6 /* For M profile, some registers are banked secure vs non-secure; * these are represented as a 2-element array where the first element diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */ #define EXCP_VSERR 24 #define EXCP_GPC 25 /* v9 Granule Protection Check Fault */ +#define EXCP_NMI 26 +#define EXCP_VINMI 27 +#define EXCP_VFNMI 28 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 #define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0 +#define CPU_INTERRUPT_NMI CPU_INTERRUPT_TGT_EXT_4 +#define CPU_INTERRUPT_VINMI CPU_INTERRUPT_TGT_EXT_0 +#define CPU_INTERRUPT_VFNMI CPU_INTERRUPT_TGT_INT_1 /* The usual mapping for an AArch64 system register to its AArch32 * counterpart is for the 32 bit world to have access to the lower diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_cpu_update_vinmi: Update CPU_INTERRUPT_VINMI bit in cs->interrupt_request + * + * Update the CPU_INTERRUPT_VINMI bit in cs->interrupt_request, following + * a change to either the input VNMI line from the GIC or the HCRX_EL2.VINMI. + * Must be called with the BQL held. + */ +void arm_cpu_update_vinmi(ARMCPU *cpu); + +/** + * arm_cpu_update_vfnmi: Update CPU_INTERRUPT_VFNMI bit in cs->interrupt_request + * + * Update the CPU_INTERRUPT_VFNMI bit in cs->interrupt_request, following + * a change to the HCRX_EL2.VFNMI. + * Must be called with the BQL held. + */ +void arm_cpu_update_vfnmi(ARMCPU *cpu); + /** * arm_cpu_update_vserr: Update CPU_INTERRUPT_VSERR bit * diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_restore_state_to_opc(CPUState *cs, } #endif /* CONFIG_TCG */ +/* + * With SCTLR_ELx.NMI == 0, IRQ with Superpriority is masked identically with + * IRQ without Superpriority. Moreover, if the GIC is configured so that + * FEAT_GICv3_NMI is only set if FEAT_NMI is set, then we won't ever see + * CPU_INTERRUPT_*NMI anyway. So we might as well accept NMI here + * unconditionally. + */ static bool arm_cpu_has_work(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) return (cpu->power_state != PSCI_OFF) && cs->interrupt_request & (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD + | CPU_INTERRUPT_NMI | CPU_INTERRUPT_VINMI | CPU_INTERRUPT_VFNMI | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ | CPU_INTERRUPT_VSERR | CPU_INTERRUPT_EXITTB); } @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, CPUARMState *env = cpu_env(cs); bool pstate_unmasked; bool unmasked = false; + bool allIntMask = false; /* * Don't take exceptions if they target a lower EL. @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, return false; } + if (cpu_isar_feature(aa64_nmi, env_archcpu(env)) && + env->cp15.sctlr_el[target_el] & SCTLR_NMI && cur_el == target_el) { + allIntMask = env->pstate & PSTATE_ALLINT || + ((env->cp15.sctlr_el[target_el] & SCTLR_SPINTMASK) && + (env->pstate & PSTATE_SP)); + } + switch (excp_idx) { + case EXCP_NMI: + pstate_unmasked = !allIntMask; + break; + + case EXCP_VINMI: + if (!(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) { + /* VINMIs are only taken when hypervized. */ + return false; + } + return !allIntMask; + case EXCP_VFNMI: + if (!(hcr_el2 & HCR_FMO) || (hcr_el2 & HCR_TGE)) { + /* VFNMIs are only taken when hypervized. */ + return false; + } + return !allIntMask; case EXCP_FIQ: - pstate_unmasked = !(env->daif & PSTATE_F); + pstate_unmasked = (!(env->daif & PSTATE_F)) && (!allIntMask); break; case EXCP_IRQ: - pstate_unmasked = !(env->daif & PSTATE_I); + pstate_unmasked = (!(env->daif & PSTATE_I)) && (!allIntMask); break; case EXCP_VFIQ: @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, /* VFIQs are only taken when hypervized. */ return false; } - return !(env->daif & PSTATE_F); + return !(env->daif & PSTATE_F) && (!allIntMask); case EXCP_VIRQ: if (!(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) { /* VIRQs are only taken when hypervized. */ return false; } - return !(env->daif & PSTATE_I); + return !(env->daif & PSTATE_I) && (!allIntMask); case EXCP_VSERR: if (!(hcr_el2 & HCR_AMO) || (hcr_el2 & HCR_TGE)) { /* VIRQs are only taken when hypervized. */ @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) /* The prioritization of interrupts is IMPLEMENTATION DEFINED. */ + if (cpu_isar_feature(aa64_nmi, env_archcpu(env)) && + (arm_sctlr(env, cur_el) & SCTLR_NMI)) { + if (interrupt_request & CPU_INTERRUPT_NMI) { + excp_idx = EXCP_NMI; + target_el = arm_phys_excp_target_el(cs, excp_idx, cur_el, secure); + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + if (interrupt_request & CPU_INTERRUPT_VINMI) { + excp_idx = EXCP_VINMI; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + if (interrupt_request & CPU_INTERRUPT_VFNMI) { + excp_idx = EXCP_VFNMI; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + } else { + /* + * NMI disabled: interrupts with superpriority are handled + * as if they didn't have it + */ + if (interrupt_request & CPU_INTERRUPT_NMI) { + interrupt_request |= CPU_INTERRUPT_HARD; + } + if (interrupt_request & CPU_INTERRUPT_VINMI) { + interrupt_request |= CPU_INTERRUPT_VIRQ; + } + if (interrupt_request & CPU_INTERRUPT_VFNMI) { + interrupt_request |= CPU_INTERRUPT_VFIQ; + } + } + if (interrupt_request & CPU_INTERRUPT_FIQ) { excp_idx = EXCP_FIQ; target_el = arm_phys_excp_target_el(cs, excp_idx, cur_el, secure); @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu) CPUARMState *env = &cpu->env; CPUState *cs = CPU(cpu); - bool new_state = (env->cp15.hcr_el2 & HCR_VI) || + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VI) && + !(arm_hcrx_el2_eff(env) & HCRX_VINMI)) || (env->irq_line_state & CPU_INTERRUPT_VIRQ); if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VIRQ) != 0)) { @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) CPUARMState *env = &cpu->env; CPUState *cs = CPU(cpu); - bool new_state = (env->cp15.hcr_el2 & HCR_VF) || + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VF) && + !(arm_hcrx_el2_eff(env) & HCRX_VFNMI)) || (env->irq_line_state & CPU_INTERRUPT_VFIQ); if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VFIQ) != 0)) { @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) } } +void arm_cpu_update_vinmi(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VINMI, which is the logical OR of + * the HCRX_EL2.VINMI bit and the input line level from the GIC. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VI) && + (arm_hcrx_el2_eff(env) & HCRX_VINMI)) || + (env->irq_line_state & CPU_INTERRUPT_VINMI); + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VINMI) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VINMI); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VINMI); + } + } +} + +void arm_cpu_update_vfnmi(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VFNMI, which is the HCRX_EL2.VFNMI bit. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = (arm_hcr_el2_eff(env) & HCR_VF) && + (arm_hcrx_el2_eff(env) & HCRX_VFNMI); + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VFNMI) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VFNMI); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VFNMI); + } + } +} + void arm_cpu_update_vserr(ARMCPU *cpu) { /* @@ -XXX,XX +XXX,XX @@ static void arm_cpu_set_irq(void *opaque, int irq, int level) [ARM_CPU_IRQ] = CPU_INTERRUPT_HARD, [ARM_CPU_FIQ] = CPU_INTERRUPT_FIQ, [ARM_CPU_VIRQ] = CPU_INTERRUPT_VIRQ, - [ARM_CPU_VFIQ] = CPU_INTERRUPT_VFIQ + [ARM_CPU_VFIQ] = CPU_INTERRUPT_VFIQ, + [ARM_CPU_NMI] = CPU_INTERRUPT_NMI, + [ARM_CPU_VINMI] = CPU_INTERRUPT_VINMI, }; if (!arm_feature(env, ARM_FEATURE_EL2) && @@ -XXX,XX +XXX,XX @@ static void arm_cpu_set_irq(void *opaque, int irq, int level) case ARM_CPU_VFIQ: arm_cpu_update_vfiq(cpu); break; + case ARM_CPU_VINMI: + arm_cpu_update_vinmi(cpu); + break; case ARM_CPU_IRQ: case ARM_CPU_FIQ: + case ARM_CPU_NMI: if (level) { cpu_interrupt(cs, mask[irq]); } else { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) #else /* Our inbound IRQ and FIQ lines */ if (kvm_enabled()) { - /* VIRQ and VFIQ are unused with KVM but we add them to maintain - * the same interface as non-KVM CPUs. + /* + * VIRQ, VFIQ, NMI, VINMI are unused with KVM but we add + * them to maintain the same interface as non-KVM CPUs. */ - qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 4); + qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 6); } else { - qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 4); + qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 6); } qdev_init_gpio_out(DEVICE(cpu), cpu->gt_timer_outputs, diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) * and the state of the input lines from the GIC. (This requires * that we have the BQL, which is done by marking the * reginfo structs as ARM_CP_IO.) - * Note that if a write to HCR pends a VIRQ or VFIQ it is never - * possible for it to be taken immediately, because VIRQ and - * VFIQ are masked unless running at EL0 or EL1, and HCR - * can only be written at EL2. + * Note that if a write to HCR pends a VIRQ or VFIQ or VINMI or + * VFNMI, it is never possible for it to be taken immediately + * because VIRQ, VFIQ, VINMI and VFNMI are masked unless running + * at EL0 or EL1, and HCR can only be written at EL2. */ g_assert(bql_locked()); arm_cpu_update_virq(cpu); arm_cpu_update_vfiq(cpu); arm_cpu_update_vserr(cpu); + if (cpu_isar_feature(aa64_nmi, cpu)) { + arm_cpu_update_vinmi(cpu); + arm_cpu_update_vfnmi(cpu); + } } static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) @@ -XXX,XX +XXX,XX @@ static void hcrx_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Clear RES0 bits. */ env->cp15.hcrx_el2 = value & valid_mask; + + /* + * Updates to VINMI and VFNMI require us to update the status of + * virtual NMI, which are the logical OR of these bits + * and the state of the input lines from the GIC. (This requires + * that we have the BQL, which is done by marking the + * reginfo structs as ARM_CP_IO.) + * Note that if a write to HCRX pends a VINMI or VFNMI it is never + * possible for it to be taken immediately, because VINMI and + * VFNMI are masked unless running at EL0 or EL1, and HCRX + * can only be written at EL2. + */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + g_assert(bql_locked()); + arm_cpu_update_vinmi(cpu); + arm_cpu_update_vfnmi(cpu); + } } static CPAccessResult access_hxen(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_hxen(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo hcrx_el2_reginfo = { .name = "HCRX_EL2", .state = ARM_CP_STATE_AA64, + .type = ARM_CP_IO, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 2, .access = PL2_RW, .writefn = hcrx_write, .accessfn = access_hxen, .nv2_redirect_offset = 0xa0, @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs) [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", [EXCP_VSERR] = "Virtual SERR", [EXCP_GPC] = "Granule Protection Check", + [EXCP_NMI] = "NMI", + [EXCP_VINMI] = "Virtual IRQ NMI", + [EXCP_VFNMI] = "Virtual FIQ NMI", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt with superpriority is always IRQ, never FIQ, so handle NMI same as IRQ in arm_phys_excp_target_el(). Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-8-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, hcr_el2 = arm_hcr_el2_eff(env); switch (excp_idx) { case EXCP_IRQ: + case EXCP_NMI: scr = ((env->cp15.scr_el3 & SCR_IRQ) == SCR_IRQ); hcr = hcr_el2 & HCR_IMO; break; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add IS and FS bit in ISR_EL1 and handle the read. With CPU_INTERRUPT_NMI or CPU_INTERRUPT_VINMI, both CPSR_I and ISR_IS must be set. With CPU_INTERRUPT_VFNMI, both CPSR_F and ISR_FS must be set. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-9-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/helper.c | 13 +++++++++++++ 2 files changed, 15 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define CPSR_N (1U << 31) #define CPSR_NZCV (CPSR_N | CPSR_Z | CPSR_C | CPSR_V) #define CPSR_AIF (CPSR_A | CPSR_I | CPSR_F) +#define ISR_FS (1U << 9) +#define ISR_IS (1U << 10) #define CPSR_IT (CPSR_IT_0_1 | CPSR_IT_2_7) #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) { ret |= CPSR_I; } + if (cs->interrupt_request & CPU_INTERRUPT_VINMI) { + ret |= ISR_IS; + ret |= CPSR_I; + } } else { if (cs->interrupt_request & CPU_INTERRUPT_HARD) { ret |= CPSR_I; } + + if (cs->interrupt_request & CPU_INTERRUPT_NMI) { + ret |= ISR_IS; + ret |= CPSR_I; + } } if (hcr_el2 & HCR_FMO) { if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) { ret |= CPSR_F; } + if (cs->interrupt_request & CPU_INTERRUPT_VFNMI) { + ret |= ISR_FS; + ret |= CPSR_F; + } } else { if (cs->interrupt_request & CPU_INTERRUPT_FIQ) { ret |= CPSR_F; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Set or clear PSTATE.ALLINT on taking an exception to ELx according to the SCTLR_ELx.SPINTMASK bit. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-10-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) } } + if (cpu_isar_feature(aa64_nmi, cpu)) { + if (!(env->cp15.sctlr_el[new_el] & SCTLR_SPINTMASK)) { + new_mode |= PSTATE_ALLINT; + } else { + new_mode &= ~PSTATE_ALLINT; + } + } + pstate_write(env, PSTATE_DAIF | new_mode); env->aarch64 = true; aarch64_restore_sp(env, new_el); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Augment the GICv3's QOM device interface by adding one new set of sysbus IRQ line, to signal NMI to each CPU. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-11-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gic_common.h | 2 ++ include/hw/intc/arm_gicv3_common.h | 2 ++ hw/intc/arm_gicv3_common.c | 6 ++++++ 3 files changed, 10 insertions(+) diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gic_common.h +++ b/include/hw/intc/arm_gic_common.h @@ -XXX,XX +XXX,XX @@ struct GICState { qemu_irq parent_fiq[GIC_NCPU]; qemu_irq parent_virq[GIC_NCPU]; qemu_irq parent_vfiq[GIC_NCPU]; + qemu_irq parent_nmi[GIC_NCPU]; + qemu_irq parent_vnmi[GIC_NCPU]; qemu_irq maintenance_irq[GIC_NCPU]; /* GICD_CTLR; for a GIC with the security extensions the NS banked version diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { qemu_irq parent_fiq; qemu_irq parent_virq; qemu_irq parent_vfiq; + qemu_irq parent_nmi; + qemu_irq parent_vnmi; /* Redistributor */ uint32_t level; /* Current IRQ level */ diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler, for (i = 0; i < s->num_cpu; i++) { sysbus_init_irq(sbd, &s->cpu[i].parent_vfiq); } + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->cpu[i].parent_nmi); + } + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->cpu[i].parent_vnmi); + } memory_region_init_io(&s->iomem_dist, OBJECT(s), ops, s, "gicv3_dist", 0x10000); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Wire the new NMI and VINMI interrupt line from the GIC to each CPU if it is not GICv2. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240407081733.3231820-12-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) /* Wire the outputs from each CPU's generic timer and the GICv3 * maintenance interrupt signal to the appropriate GIC PPI inputs, - * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + * and the GIC's IRQ/FIQ/VIRQ/VFIQ/NMI/VINMI interrupt outputs to the + * CPU's inputs. */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus, qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (vms->gic_version != VIRT_GIC_VERSION_2) { + sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_NMI)); + sysbus_connect_irq(gicbusdev, i + 5 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VINMI)); + } } fdt_add_gic_node(vms); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt with superpriority is always IRQ, never FIQ, so the NMI exception trap entry behave like IRQ. And VINMI(vIRQ with Superpriority) can be raised from the GIC or come from the hcrx_el2.HCRX_VINMI bit, VFNMI(vFIQ with Superpriority) come from the hcrx_el2.HCRX_VFNMI bit. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-13-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) break; case EXCP_IRQ: case EXCP_VIRQ: + case EXCP_NMI: + case EXCP_VINMI: addr += 0x80; break; case EXCP_FIQ: case EXCP_VFIQ: + case EXCP_VFNMI: addr += 0x100; break; case EXCP_VSERR: -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add a property has-nmi to the GICv3 device, and use this to set the NMI bit in the GICD_TYPER register. This isn't visible to guests yet because the property defaults to false and we won't set it in the board code until we've landed all of the changes needed to implement FEAT_GICV3_NMI. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-14-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 1 + hw/intc/arm_gicv3_dist.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICD_CTLR_E1NWF (1U << 7) #define GICD_CTLR_RWP (1U << 31) +#define GICD_TYPER_NMI_SHIFT 9 #define GICD_TYPER_LPIS_SHIFT 17 /* 16 bits EventId */ diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3State { uint32_t num_irq; uint32_t revision; bool lpi_enable; + bool nmi_support; bool security_extn; bool force_8bit_prio; bool irq_reset_nonsecure; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static Property arm_gicv3_common_properties[] = { DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32), DEFINE_PROP_UINT32("revision", GICv3State, revision, 3), DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0), + DEFINE_PROP_BOOL("has-nmi", GICv3State, nmi_support, 0), DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0), /* * Compatibility property: force 8 bits of physical priority, even diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_dist.c +++ b/hw/intc/arm_gicv3_dist.c @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, * by GICD_TYPER.IDbits) * MBIS == 0 (message-based SPIs not supported) * SecurityExtn == 1 if security extns supported + * NMI = 1 if Non-maskable interrupt property is supported * CPUNumber == 0 since for us ARE is always 1 * ITLinesNumber == (((max SPI IntID + 1) / 32) - 1) */ @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, bool dvis = s->revision >= 4; *data = (1 << 25) | (1 << 24) | (dvis << 18) | (sec_extn << 10) | + (s->nmi_support << GICD_TYPER_NMI_SHIFT) | (s->lpi_enable << GICD_TYPER_LPIS_SHIFT) | (0xf << 19) | itlinesnumber; return true; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> So far, there is no FEAT_GICv3_NMI support in the in-kernel GIC, so make it an error to try to set has-nmi=true for the KVM GICv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Message-id: 20240407081733.3231820-15-ruanjinjie@huawei.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) return; } + if (s->nmi_support) { + error_setg(errp, "NMI is not supported with the in-kernel GIC"); + return; + } + gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); for (i = 0; i < s->num_cpu; i++) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> A SPI, PPI or SGI interrupt can have non-maskable property. So maintain non-maskable property in PendingIrq and GICR/GICD. Since add new device state, it also needs to be migrated, so also save NMI info in vmstate_gicv3_cpu and vmstate_gicv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-16-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 4 ++++ hw/intc/arm_gicv3_common.c | 38 ++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ typedef struct { int irq; uint8_t prio; int grp; + bool nmi; } PendingIrq; struct GICv3CPUState { @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { uint32_t gicr_ienabler0; uint32_t gicr_ipendr0; uint32_t gicr_iactiver0; + uint32_t gicr_inmir0; uint32_t edge_trigger; /* ICFGR0 and ICFGR1 even bits */ uint32_t gicr_igrpmodr0; uint32_t gicr_nsacr; @@ -XXX,XX +XXX,XX @@ struct GICv3State { GIC_DECLARE_BITMAP(active); /* GICD_ISACTIVER */ GIC_DECLARE_BITMAP(level); /* Current level */ GIC_DECLARE_BITMAP(edge_trigger); /* GICD_ICFGR even bits */ + GIC_DECLARE_BITMAP(nmi); /* GICD_INMIR */ uint8_t gicd_ipriority[GICV3_MAXIRQ]; uint64_t gicd_irouter[GICV3_MAXIRQ]; /* Cached information: pointer to the cpu i/f for the CPUs specified @@ -XXX,XX +XXX,XX @@ GICV3_BITMAP_ACCESSORS(pending) GICV3_BITMAP_ACCESSORS(active) GICV3_BITMAP_ACCESSORS(level) GICV3_BITMAP_ACCESSORS(edge_trigger) +GICV3_BITMAP_ACCESSORS(nmi) #define TYPE_ARM_GICV3_COMMON "arm-gicv3-common" typedef struct ARMGICv3CommonClass ARMGICv3CommonClass; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_gicv3_gicv4 = { } }; +static bool gicv3_cpu_nmi_needed(void *opaque) +{ + GICv3CPUState *cs = opaque; + + return cs->gic->nmi_support; +} + +static const VMStateDescription vmstate_gicv3_cpu_nmi = { + .name = "arm_gicv3_cpu/nmi", + .version_id = 1, + .minimum_version_id = 1, + .needed = gicv3_cpu_nmi_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(gicr_inmir0, GICv3CPUState), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3_cpu = { .name = "arm_gicv3_cpu", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { &vmstate_gicv3_cpu_virt, &vmstate_gicv3_cpu_sre_el1, &vmstate_gicv3_gicv4, + &vmstate_gicv3_cpu_nmi, NULL } }; @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = { } }; +static bool gicv3_nmi_needed(void *opaque) +{ + GICv3State *cs = opaque; + + return cs->nmi_support; +} + +const VMStateDescription vmstate_gicv3_gicd_nmi = { + .name = "arm_gicv3/gicd_nmi", + .version_id = 1, + .minimum_version_id = 1, + .needed = gicv3_nmi_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(nmi, GICv3State, GICV3_BMP_SIZE), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3 = { .name = "arm_gicv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3 = { }, .subsections = (const VMStateDescription * const []) { &vmstate_gicv3_gicd_no_migration_shift_bug, + &vmstate_gicv3_gicd_nmi, NULL } }; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add GICR_INMIR0 register and support access GICR_INMIR0. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-17-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + hw/intc/arm_gicv3_redist.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICR_ICFGR1 (GICR_SGI_OFFSET + 0x0C04) #define GICR_IGRPMODR0 (GICR_SGI_OFFSET + 0x0D00) #define GICR_NSACR (GICR_SGI_OFFSET + 0x0E00) +#define GICR_INMIR0 (GICR_SGI_OFFSET + 0x0F80) /* VLPI redistributor registers, offsets from VLPI_base */ #define GICR_VPROPBASER (GICR_VLPI_OFFSET + 0x70) diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ static int gicr_ns_access(GICv3CPUState *cs, int irq) return extract32(cs->gicr_nsacr, irq * 2, 2); } +static void gicr_write_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs, + uint32_t *reg, uint32_t val) +{ + /* Helper routine to implement writing to a "set" register */ + val &= mask_group(cs, attrs); + *reg = val; + gicv3_redist_update(cs); +} + static void gicr_write_set_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs, uint32_t *reg, uint32_t val) { @@ -XXX,XX +XXX,XX @@ static MemTxResult gicr_readl(GICv3CPUState *cs, hwaddr offset, *data = value; return MEMTX_OK; } + case GICR_INMIR0: + *data = cs->gic->nmi_support ? + gicr_read_bitmap_reg(cs, attrs, cs->gicr_inmir0) : 0; + return MEMTX_OK; case GICR_ICFGR0: case GICR_ICFGR1: { @@ -XXX,XX +XXX,XX @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset, gicv3_redist_update(cs); return MEMTX_OK; } + case GICR_INMIR0: + if (cs->gic->nmi_support) { + gicr_write_bitmap_reg(cs, attrs, &cs->gicr_inmir0, value); + } + return MEMTX_OK; + case GICR_ICFGR0: /* Register is all RAZ/WI or RAO/WI bits */ return MEMTX_OK; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add GICD_INMIR, GICD_INMIRnE register and support access GICD_INMIR0. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-18-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 2 ++ hw/intc/arm_gicv3_dist.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICD_SGIR 0x0F00 #define GICD_CPENDSGIR 0x0F10 #define GICD_SPENDSGIR 0x0F20 +#define GICD_INMIR 0x0F80 +#define GICD_INMIRnE 0x3B00 #define GICD_IROUTER 0x6000 #define GICD_IDREGS 0xFFD0 diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_dist.c +++ b/hw/intc/arm_gicv3_dist.c @@ -XXX,XX +XXX,XX @@ static int gicd_ns_access(GICv3State *s, int irq) return extract32(s->gicd_nsacr[irq / 16], (irq % 16) * 2, 2); } +static void gicd_write_bitmap_reg(GICv3State *s, MemTxAttrs attrs, + uint32_t *bmp, maskfn *maskfn, + int offset, uint32_t val) +{ + /* + * Helper routine to implement writing to a "set" register + * (GICD_INMIR, etc). + * Semantics implemented here: + * RAZ/WI for SGIs, PPIs, unimplemented IRQs + * Bits corresponding to Group 0 or Secure Group 1 interrupts RAZ/WI. + * offset should be the offset in bytes of the register from the start + * of its group. + */ + int irq = offset * 8; + + if (irq < GIC_INTERNAL || irq >= s->num_irq) { + return; + } + val &= mask_group_and_nsacr(s, attrs, maskfn, irq); + *gic_bmp_ptr32(bmp, irq) = val; + gicv3_update(s, irq, 32); +} + static void gicd_write_set_bitmap_reg(GICv3State *s, MemTxAttrs attrs, uint32_t *bmp, maskfn *maskfn, @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, /* RAZ/WI since affinity routing is always enabled */ *data = 0; return true; + case GICD_INMIR ... GICD_INMIR + 0x7f: + *data = (!s->nmi_support) ? 0 : + gicd_read_bitmap_reg(s, attrs, s->nmi, NULL, + offset - GICD_INMIR); + return true; case GICD_IROUTER ... GICD_IROUTER + 0x1fdf: { uint64_t r; @@ -XXX,XX +XXX,XX @@ static bool gicd_writel(GICv3State *s, hwaddr offset, case GICD_SPENDSGIR ... GICD_SPENDSGIR + 0xf: /* RAZ/WI since affinity routing is always enabled */ return true; + case GICD_INMIR ... GICD_INMIR + 0x7f: + if (s->nmi_support) { + gicd_write_bitmap_reg(s, attrs, s->nmi, NULL, + offset - GICD_INMIR, value); + } + return true; case GICD_IROUTER ... GICD_IROUTER + 0x1fdf: { uint64_t r; -- 2.34.1 Add the NMIAR CPU interface registers which deal with acknowledging NMI. When introduce NMI interrupt, there are some updates to the semantics for the register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it should return 1022 if the intid has non-maskable property. And for ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1 register. And the APR and RPR has NMI bits which should be handled correctly. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: Separate out whether cpuif supports NMI from whether the GIC proper (IRI) supports NMI] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 5 + include/hw/intc/arm_gicv3_common.h | 7 ++ hw/intc/arm_gicv3_cpuif.c | 147 ++++++++++++++++++++++++++++- hw/intc/trace-events | 1 + 4 files changed, 155 insertions(+), 5 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICC_CTLR_EL3_A3V (1U << 15) #define ICC_CTLR_EL3_NDS (1U << 17) +#define ICC_AP1R_EL1_NMI (1ULL << 63) +#define ICC_RPR_EL1_NSNMI (1ULL << 62) +#define ICC_RPR_EL1_NMI (1ULL << 63) + #define ICH_VMCR_EL2_VENG0_SHIFT 0 #define ICH_VMCR_EL2_VENG0 (1U << ICH_VMCR_EL2_VENG0_SHIFT) #define ICH_VMCR_EL2_VENG1_SHIFT 1 @@ -XXX,XX +XXX,XX @@ FIELD(VTE, RDBASE, 42, RDBASE_PROCNUM_LENGTH) /* Special interrupt IDs */ #define INTID_SECURE 1020 #define INTID_NONSECURE 1021 +#define INTID_NMI 1022 #define INTID_SPURIOUS 1023 /* Functions internal to the emulated GICv3 */ diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { /* This is temporary working state, to avoid a malloc in gicv3_update() */ bool seenbetter; + + /* + * Whether the CPU interface has NMI support (FEAT_GICv3_NMI). The + * CPU interface may support NMIs even when the GIC proper (what the + * spec calls the IRI; the redistributors and distributor) does not. + */ + bool nmi_support; }; /* diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" #include "target/arm/cpregs.h" +#include "target/arm/cpu-features.h" #include "sysemu/tcg.h" #include "sysemu/qtest.h" @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) return intid; } +static uint64_t icv_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* todo */ + uint64_t intid = INTID_SPURIOUS; + return intid; +} + static uint32_t icc_fullprio_mask(GICv3CPUState *cs) { /* @@ -XXX,XX +XXX,XX @@ static int icc_highest_active_prio(GICv3CPUState *cs) */ int i; + if (cs->nmi_support) { + /* + * If an NMI is active this takes precedence over anything else + * for priority purposes; the NMI bit is only in the AP1R0 bit. + * We return here the effective priority of the NMI, which is + * either 0x0 or 0x80. Callers will need to check NMI again for + * purposes of either setting the RPR register bits or for + * prioritization of NMI vs non-NMI. + */ + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + return 0; + } + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + return (cs->gic->gicd_ctlr & GICD_CTLR_DS) ? 0 : 0x80; + } + } + for (i = 0; i < icc_num_aprs(cs); i++) { uint32_t apr = cs->icc_apr[GICV3_G0][i] | cs->icc_apr[GICV3_G1][i] | cs->icc_apr[GICV3_G1NS][i]; @@ -XXX,XX +XXX,XX @@ static bool icc_hppi_can_preempt(GICv3CPUState *cs) */ int rprio; uint32_t mask; + ARMCPU *cpu = ARM_CPU(cs->cpu); + CPUARMState *env = &cpu->env; if (icc_no_enabled_hppi(cs)) { return false; } - if (cs->hppi.prio >= cs->icc_pmr_el1) { + if (cs->hppi.nmi) { + if (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) && + cs->hppi.grp == GICV3_G1NS) { + if (cs->icc_pmr_el1 < 0x80) { + return false; + } + if (arm_is_secure(env) && cs->icc_pmr_el1 == 0x80) { + return false; + } + } + } else if (cs->hppi.prio >= cs->icc_pmr_el1) { /* Priority mask masks this interrupt */ return false; } @@ -XXX,XX +XXX,XX @@ static bool icc_hppi_can_preempt(GICv3CPUState *cs) return true; } + if (cs->hppi.nmi && (cs->hppi.prio & mask) == (rprio & mask)) { + if (!(cs->icc_apr[cs->hppi.grp][0] & ICC_AP1R_EL1_NMI)) { + return true; + } + } + return false; } @@ -XXX,XX +XXX,XX @@ static void icc_activate_irq(GICv3CPUState *cs, int irq) int aprbit = prio >> (8 - cs->prebits); int regno = aprbit / 32; int regbit = aprbit % 32; + bool nmi = cs->hppi.nmi; - cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit); + if (nmi) { + cs->icc_apr[cs->hppi.grp][regno] |= ICC_AP1R_EL1_NMI; + } else { + cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit); + } if (irq < GIC_INTERNAL) { cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_iar0_read(CPUARMState *env, const ARMCPRegInfo *ri) static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); + int el = arm_current_el(env); uint64_t intid; if (icv_access(env, HCR_IMO)) { @@ -XXX,XX +XXX,XX @@ static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri) } if (!gicv3_intid_is_special(intid)) { - icc_activate_irq(cs, intid); + if (cs->hppi.nmi && env->cp15.sctlr_el[el] & SCTLR_NMI) { + intid = INTID_NMI; + } else { + icc_activate_irq(cs, intid); + } } trace_gicv3_icc_iar1_read(gicv3_redist_affid(cs), intid); return intid; } +static uint64_t icc_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + GICv3CPUState *cs = icc_cs_from_env(env); + uint64_t intid; + + if (icv_access(env, HCR_IMO)) { + return icv_nmiar1_read(env, ri); + } + + if (!icc_hppi_can_preempt(cs)) { + intid = INTID_SPURIOUS; + } else { + intid = icc_hppir1_value(cs, env); + } + + if (!gicv3_intid_is_special(intid)) { + if (!cs->hppi.nmi) { + intid = INTID_SPURIOUS; + } else { + icc_activate_irq(cs, intid); + } + } + + trace_gicv3_icc_nmiar1_read(gicv3_redist_affid(cs), intid); + return intid; +} + static void icc_drop_prio(GICv3CPUState *cs, int grp) { /* Drop the priority of the currently active interrupt in @@ -XXX,XX +XXX,XX @@ static void icc_drop_prio(GICv3CPUState *cs, int grp) if (!*papr) { continue; } + + if (i == 0 && cs->nmi_support && (*papr & ICC_AP1R_EL1_NMI)) { + *papr &= (~ICC_AP1R_EL1_NMI); + break; + } + /* Clear the lowest set bit */ *papr &= *papr - 1; break; @@ -XXX,XX +XXX,XX @@ static int icc_highest_active_group(GICv3CPUState *cs) */ int i; + if (cs->nmi_support) { + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + return GICV3_G1; + } + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + return GICV3_G1NS; + } + } + for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) { int g0ctz = ctz32(cs->icc_apr[GICV3_G0][i]); int g1ctz = ctz32(cs->icc_apr[GICV3_G1][i]); @@ -XXX,XX +XXX,XX @@ static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } - cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->icc_apr[grp][regno] = value & (0xFFFFFFFFU | ICC_AP1R_EL1_NMI); + } else { + cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_update(cs); } @@ -XXX,XX +XXX,XX @@ static void icc_dir_write(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); - int prio; + uint64_t prio; if (icv_access(env, HCR_FMO | HCR_IMO)) { return icv_rpr_read(env, ri); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) } } + if (cs->nmi_support) { + /* NMI info is reported in the high bits of RPR */ + if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env)) { + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NMI; + } + } else { + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NSNMI; + } + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NMI; + } + } + } + trace_gicv3_icc_rpr_read(gicv3_redist_affid(cs), prio); return prio; } @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_icc_apxr23_reginfo[] = { }, }; +static const ARMCPRegInfo gicv3_cpuif_gicv3_nmi_reginfo[] = { + { .name = "ICC_NMIAR1_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 5, + .type = ARM_CP_IO | ARM_CP_NO_RAW, + .access = PL1_R, .accessfn = gicv3_irq_access, + .readfn = icc_nmiar1_read, + }, +}; + static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); @@ -XXX,XX +XXX,XX @@ void gicv3_init_cpuif(GICv3State *s) */ define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); + /* + * If the CPU implements FEAT_NMI and FEAT_GICv3 it must also + * implement FEAT_GICv3_NMI, which is the CPU interface part + * of NMI support. This is distinct from whether the GIC proper + * (redistributors and distributor) have NMI support. In QEMU + * that is a property of the GIC device in s->nmi_support; + * cs->nmi_support indicates the CPU interface's support. + */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + cs->nmi_support = true; + define_arm_cp_regs(cpu, gicv3_cpuif_gicv3_nmi_reginfo); + } + /* * The CPU implementation specifies the number of supported * bits of physical priority. For backwards compatibility diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_cpuif_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel) "GICv3 CPU i/f gicv3_icc_generate_sgi(uint32_t cpuid, int irq, int irm, uint32_t aff, uint32_t targetlist) "GICv3 CPU i/f 0x%x generating SGI %d IRM %d target affinity 0x%xxx targetlist 0x%x" gicv3_icc_iar0_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IAR0 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_iar1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IAR1 read cpu 0x%x value 0x%" PRIx64 +gicv3_icc_nmiar1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_NMIAR1 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_eoir_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICC_EOIR%d write cpu 0x%x value 0x%" PRIx64 gicv3_icc_hppir0_read(uint32_t cpu, uint64_t val) "GICv3 ICC_HPPIR0 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_hppir1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_HPPIR1 read cpu 0x%x value 0x%" PRIx64 -- 2.34.1 Implement icv_nmiar1_read() for icc_nmiar1_read(), so add definition for ICH_LR_EL2.NMI and ICH_AP1R_EL2.NMI bit. If FEAT_GICv3_NMI is supported, ich_ap_write() should consider ICV_AP1R_EL1.NMI bit. In icv_activate_irq() and icv_eoir_write(), the ICV_AP1R_EL1.NMI bit should be set or clear according to the Non-maskable property. And the RPR priority should also update the NMI bit according to the APR priority NMI bit. By the way, add gicv3_icv_nmiar1_read trace event. If the hpp irq is a NMI, the icv iar read should return 1022 and trap for NMI again Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: use cs->nmi_support instead of cs->gic->nmi_support] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-20-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 4 ++ hw/intc/arm_gicv3_cpuif.c | 105 +++++++++++++++++++++++++++++++++----- hw/intc/trace-events | 1 + 3 files changed, 98 insertions(+), 12 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICH_LR_EL2_PRIORITY_SHIFT 48 #define ICH_LR_EL2_PRIORITY_LENGTH 8 #define ICH_LR_EL2_PRIORITY_MASK (0xffULL << ICH_LR_EL2_PRIORITY_SHIFT) +#define ICH_LR_EL2_NMI (1ULL << 59) #define ICH_LR_EL2_GROUP (1ULL << 60) #define ICH_LR_EL2_HW (1ULL << 61) #define ICH_LR_EL2_STATE_SHIFT 62 @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICH_VTR_EL2_PREBITS_SHIFT 26 #define ICH_VTR_EL2_PRIBITS_SHIFT 29 +#define ICV_AP1R_EL1_NMI (1ULL << 63) +#define ICV_RPR_EL1_NMI (1ULL << 63) + /* ITS Registers */ FIELD(GITS_BASER, SIZE, 0, 8) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static int ich_highest_active_virt_prio(GICv3CPUState *cs) int i; int aprmax = ich_num_aprs(cs); + if (cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI) { + return 0x0; + } + for (i = 0; i < aprmax; i++) { uint32_t apr = cs->ich_apr[GICV3_G0][i] | cs->ich_apr[GICV3_G1NS][i]; @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) * correct behaviour. */ int prio = 0xff; + bool nmi = false; if (!(cs->ich_vmcr_el2 & (ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1))) { /* Both groups disabled, definitely nothing to do */ @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) for (i = 0; i < cs->num_list_regs; i++) { uint64_t lr = cs->ich_lr_el2[i]; + bool thisnmi; int thisprio; if (ich_lr_state(lr) != ICH_LR_EL2_STATE_PENDING) { @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) } } + thisnmi = lr & ICH_LR_EL2_NMI; thisprio = ich_lr_prio(lr); - if (thisprio < prio) { + if ((thisprio < prio) || ((thisprio == prio) && (thisnmi & (!nmi)))) { prio = thisprio; + nmi = thisnmi; idx = i; } } @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) * equivalent of these checks. */ int grp; + bool is_nmi; uint32_t mask, prio, rprio, vpmr; if (!(cs->ich_hcr_el2 & ICH_HCR_EL2_EN)) { @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) */ prio = ich_lr_prio(lr); + is_nmi = lr & ICH_LR_EL2_NMI; vpmr = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT, ICH_VMCR_EL2_VPMR_LENGTH); - if (prio >= vpmr) { + if (!is_nmi && prio >= vpmr) { /* Priority mask masks this interrupt */ return false; } @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) return true; } + if ((prio & mask) == (rprio & mask) && is_nmi && + !(cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI)) { + return true; + } + return false; } @@ -XXX,XX +XXX,XX @@ static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); - cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->ich_apr[grp][regno] = value & (0xFFFFFFFFU | ICV_AP1R_EL1_NMI); + } else { + cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_virt_irq_fiq_update(cs); return; @@ -XXX,XX +XXX,XX @@ static void icv_ctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t icv_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); - int prio = ich_highest_active_virt_prio(cs); + uint64_t prio = ich_highest_active_virt_prio(cs); + + if (cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI) { + prio |= ICV_RPR_EL1_NMI; + } trace_gicv3_icv_rpr_read(gicv3_redist_affid(cs), prio); return prio; @@ -XXX,XX +XXX,XX @@ static void icv_activate_irq(GICv3CPUState *cs, int idx, int grp) */ uint32_t mask = icv_gprio_mask(cs, grp); int prio = ich_lr_prio(cs->ich_lr_el2[idx]) & mask; + bool nmi = cs->ich_lr_el2[idx] & ICH_LR_EL2_NMI; int aprbit = prio >> (8 - cs->vprebits); int regno = aprbit / 32; int regbit = aprbit % 32; cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; cs->ich_lr_el2[idx] |= ICH_LR_EL2_STATE_ACTIVE_BIT; - cs->ich_apr[grp][regno] |= (1 << regbit); + + if (nmi) { + cs->ich_apr[grp][regno] |= ICV_AP1R_EL1_NMI; + } else { + cs->ich_apr[grp][regno] |= (1 << regbit); + } } static void icv_activate_vlpi(GICv3CPUState *cs) @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS; int idx = hppvi_index(cs); uint64_t intid = INTID_SPURIOUS; + int el = arm_current_el(env); if (idx == HPPVI_INDEX_VLPI) { if (cs->hppvlpi.grp == grp && icv_hppvlpi_can_preempt(cs)) { @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) } else if (idx >= 0) { uint64_t lr = cs->ich_lr_el2[idx]; int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; + bool nmi = env->cp15.sctlr_el[el] & SCTLR_NMI && lr & ICH_LR_EL2_NMI; if (thisgrp == grp && icv_hppi_can_preempt(cs, lr)) { intid = ich_lr_vintid(lr); if (!gicv3_intid_is_special(intid)) { - icv_activate_irq(cs, idx, grp); + if (!nmi) { + icv_activate_irq(cs, idx, grp); + } else { + intid = INTID_NMI; + } } else { /* Interrupt goes from Pending to Invalid */ cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) static uint64_t icv_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) { - /* todo */ + GICv3CPUState *cs = icc_cs_from_env(env); + int idx = hppvi_index(cs); uint64_t intid = INTID_SPURIOUS; + + if (idx >= 0 && idx != HPPVI_INDEX_VLPI) { + uint64_t lr = cs->ich_lr_el2[idx]; + int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; + + if ((thisgrp == GICV3_G1NS) && icv_hppi_can_preempt(cs, lr)) { + intid = ich_lr_vintid(lr); + if (!gicv3_intid_is_special(intid)) { + if (lr & ICH_LR_EL2_NMI) { + icv_activate_irq(cs, idx, GICV3_G1NS); + } else { + intid = INTID_SPURIOUS; + } + } else { + /* Interrupt goes from Pending to Invalid */ + cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; + /* + * We will now return the (bogus) ID from the list register, + * as per the pseudocode. + */ + } + } + } + + trace_gicv3_icv_nmiar1_read(gicv3_redist_affid(cs), intid); + + gicv3_cpuif_virt_update(cs); + return intid; } @@ -XXX,XX +XXX,XX @@ static void icv_increment_eoicount(GICv3CPUState *cs) ICH_HCR_EL2_EOICOUNT_LENGTH, eoicount + 1); } -static int icv_drop_prio(GICv3CPUState *cs) +static int icv_drop_prio(GICv3CPUState *cs, bool *nmi) { /* Drop the priority of the currently active virtual interrupt * (favouring group 0 if there is a set active bit at @@ -XXX,XX +XXX,XX @@ static int icv_drop_prio(GICv3CPUState *cs) continue; } + if (i == 0 && cs->nmi_support && (*papr1 & ICV_AP1R_EL1_NMI)) { + *papr1 &= (~ICV_AP1R_EL1_NMI); + *nmi = true; + return 0xff; + } + /* We can't just use the bit-twiddling hack icc_drop_prio() does * because we need to return the bit number we cleared so * it can be compared against the list register's priority field. @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, int irq = value & 0xffffff; int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS; int idx, dropprio; + bool nmi = false; trace_gicv3_icv_eoir_write(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, * error checks" (because that lets us avoid scanning the AP * registers twice). */ - dropprio = icv_drop_prio(cs); - if (dropprio == 0xff) { + dropprio = icv_drop_prio(cs, &nmi); + if (dropprio == 0xff && !nmi) { /* No active interrupt. It is CONSTRAINED UNPREDICTABLE * whether the list registers are checked in this * situation; we choose not to. @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t lr = cs->ich_lr_el2[idx]; int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; int lr_gprio = ich_lr_prio(lr) & icv_gprio_mask(cs, grp); + bool thisnmi = lr & ICH_LR_EL2_NMI; - if (thisgrp == grp && lr_gprio == dropprio) { + if (thisgrp == grp && (lr_gprio == dropprio || (thisnmi & nmi))) { if (!icv_eoi_split(env, cs) || irq >= GICV3_LPI_INTID_START) { /* * Priority drop and deactivate not split: deactivate irq now. @@ -XXX,XX +XXX,XX @@ static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); - cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->ich_apr[grp][regno] = value & (0xFFFFFFFFU | ICV_AP1R_EL1_NMI); + } else { + cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_virt_irq_fiq_update(cs); } @@ -XXX,XX +XXX,XX @@ static void ich_lr_write(CPUARMState *env, const ARMCPRegInfo *ri, 8 - cs->vpribits, 0); } + /* Enforce RES0 bit in NMI field when FEAT_GICv3_NMI is not implemented */ + if (!cs->nmi_support) { + value &= ~ICH_LR_EL2_NMI; + } + cs->ich_lr_el2[regno] = value; gicv3_cpuif_virt_update(cs); } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_icv_rpr_read(uint32_t cpu, uint64_t val) "GICv3 ICV_RPR read cpu 0x%x valu gicv3_icv_hppir_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_HPPIR%d read cpu 0x%x value 0x%" PRIx64 gicv3_icv_dir_write(uint32_t cpu, uint64_t val) "GICv3 ICV_DIR write cpu 0x%x value 0x%" PRIx64 gicv3_icv_iar_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_IAR%d read cpu 0x%x value 0x%" PRIx64 +gicv3_icv_nmiar1_read(uint32_t cpu, uint64_t val) "GICv3 ICV_NMIAR1 read cpu 0x%x value 0x%" PRIx64 gicv3_icv_eoir_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_EOIR%d write cpu 0x%x value 0x%" PRIx64 gicv3_cpuif_virt_update(uint32_t cpuid, int idx, int hppvlpi, int grp, int prio) "GICv3 CPU i/f 0x%x virt HPPI update LR index %d HPPVLPI %d grp %d prio %d" gicv3_cpuif_virt_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel) "GICv3 CPU i/f 0x%x virt HPPI update: setting FIQ %d IRQ %d" -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> If GICD_CTLR_DS bit is zero and the NMI is non-secure, the NMI priority is higher than 0x80, otherwise it is higher than 0x0. And save the interrupt non-maskable property in hppi.nmi to deliver NMI exception. Since both GICR and GICD can deliver NMI, it is both necessary to check whether the pending irq is NMI in gicv3_redist_update_noirqset and gicv3_update_noirqset. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-21-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 67 +++++++++++++++++++++++++++++++++----- hw/intc/arm_gicv3_common.c | 3 ++ hw/intc/arm_gicv3_redist.c | 3 ++ 3 files changed, 64 insertions(+), 9 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gicv3.h" #include "gicv3_internal.h" -static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio) +static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio, bool nmi) { /* Return true if this IRQ at this priority should take * precedence over the current recorded highest priority @@ -XXX,XX +XXX,XX @@ static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio) * is the same as this one (a property which the calling code * relies on). */ - if (prio < cs->hppi.prio) { - return true; + if (prio != cs->hppi.prio) { + return prio < cs->hppi.prio; } + + /* + * The same priority IRQ with non-maskable property should signal to + * the CPU as it have the priority higher than the labelled 0x80 or 0x00. + */ + if (nmi != cs->hppi.nmi) { + return nmi; + } + /* If multiple pending interrupts have the same priority then it is an * IMPDEF choice which of them to signal to the CPU. We choose to * signal the one with the lowest interrupt number. */ - if (prio == cs->hppi.prio && irq <= cs->hppi.irq) { + if (irq <= cs->hppi.irq) { return true; } return false; @@ -XXX,XX +XXX,XX @@ static uint32_t gicr_int_pending(GICv3CPUState *cs) return pend; } +static bool gicv3_get_priority(GICv3CPUState *cs, bool is_redist, int irq, + uint8_t *prio) +{ + uint32_t nmi = 0x0; + + if (is_redist) { + nmi = extract32(cs->gicr_inmir0, irq, 1); + } else { + nmi = *gic_bmp_ptr32(cs->gic->nmi, irq); + nmi = nmi & (1 << (irq & 0x1f)); + } + + if (nmi) { + /* DS = 0 & Non-secure NMI */ + if (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) && + ((is_redist && extract32(cs->gicr_igroupr0, irq, 1)) || + (!is_redist && gicv3_gicd_group_test(cs->gic, irq)))) { + *prio = 0x80; + } else { + *prio = 0x0; + } + + return true; + } + + if (is_redist) { + *prio = cs->gicr_ipriorityr[irq]; + } else { + *prio = cs->gic->gicd_ipriority[irq]; + } + + return false; +} + /* Update the interrupt status after state in a redistributor * or CPU interface has changed, but don't tell the CPU i/f. */ @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) uint8_t prio; int i; uint32_t pend; + bool nmi = false; /* Find out which redistributor interrupts are eligible to be * signaled to the CPU interface. @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) if (!(pend & (1 << i))) { continue; } - prio = cs->gicr_ipriorityr[i]; - if (irqbetter(cs, i, prio)) { + nmi = gicv3_get_priority(cs, true, i, &prio); + if (irqbetter(cs, i, prio, nmi)) { cs->hppi.irq = i; cs->hppi.prio = prio; + cs->hppi.nmi = nmi; seenbetter = true; } } @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable && (cs->gic->gicd_ctlr & GICD_CTLR_EN_GRP1NS) && (cs->hpplpi.prio != 0xff)) { - if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) { + if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio, cs->hpplpi.nmi)) { cs->hppi.irq = cs->hpplpi.irq; cs->hppi.prio = cs->hpplpi.prio; + cs->hppi.nmi = cs->hpplpi.nmi; cs->hppi.grp = cs->hpplpi.grp; seenbetter = true; } @@ -XXX,XX +XXX,XX @@ static void gicv3_update_noirqset(GICv3State *s, int start, int len) int i; uint8_t prio; uint32_t pend = 0; + bool nmi = false; assert(start >= GIC_INTERNAL); assert(len > 0); @@ -XXX,XX +XXX,XX @@ static void gicv3_update_noirqset(GICv3State *s, int start, int len) */ continue; } - prio = s->gicd_ipriority[i]; - if (irqbetter(cs, i, prio)) { + nmi = gicv3_get_priority(cs, false, i, &prio); + if (irqbetter(cs, i, prio, nmi)) { cs->hppi.irq = i; cs->hppi.prio = prio; + cs->hppi.nmi = nmi; cs->seenbetter = true; } } @@ -XXX,XX +XXX,XX @@ void gicv3_full_update_noirqset(GICv3State *s) for (i = 0; i < s->num_cpu; i++) { s->cpu[i].hppi.prio = 0xff; + s->cpu[i].hppi.nmi = false; } /* Note that we can guarantee that these functions will not diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_reset_hold(Object *obj) memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr)); cs->hppi.prio = 0xff; + cs->hppi.nmi = false; cs->hpplpi.prio = 0xff; + cs->hpplpi.nmi = false; cs->hppvlpi.prio = 0xff; + cs->hppvlpi.nmi = false; /* State in the CPU interface must *not* be reset here, because it * is part of the CPU's reset domain, not the GIC device's. diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ static void update_for_one_lpi(GICv3CPUState *cs, int irq, ((prio == hpp->prio) && (irq <= hpp->irq))) { hpp->irq = irq; hpp->prio = prio; + hpp->nmi = false; /* LPIs and vLPIs are always non-secure Grp1 interrupts */ hpp->grp = GICV3_G1NS; } @@ -XXX,XX +XXX,XX @@ static void update_for_all_lpis(GICv3CPUState *cs, uint64_t ptbase, int i, bit; hpp->prio = 0xff; + hpp->nmi = false; for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) { address_space_read(as, ptbase + i, MEMTXATTRS_UNSPECIFIED, &pend, 1); @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_vlpi_only(GICv3CPUState *cs) if (!FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID)) { cs->hppvlpi.prio = 0xff; + cs->hppvlpi.nmi = false; return; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> In CPU Interface, if the IRQ has the non-maskable property, report NMI to the corresponding PE. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-22-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) /* Tell the CPU about its highest priority pending interrupt */ int irqlevel = 0; int fiqlevel = 0; + int nmilevel = 0; ARMCPU *cpu = ARM_CPU(cs->cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) if (isfiq) { fiqlevel = 1; + } else if (cs->hppi.nmi) { + nmilevel = 1; } else { irqlevel = 1; } @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) qemu_set_irq(cs->parent_fiq, fiqlevel); qemu_set_irq(cs->parent_irq, irqlevel); + qemu_set_irq(cs->parent_nmi, nmilevel); } static uint64_t icc_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri) -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> In vCPU Interface, if the vIRQ has the non-maskable property, report vINMI to the corresponding vPE. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-23-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) int idx; int irqlevel = 0; int fiqlevel = 0; + int nmilevel = 0; idx = hppvi_index(cs); trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx, @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) uint64_t lr = cs->ich_lr_el2[idx]; if (icv_hppi_can_preempt(cs, lr)) { - /* Virtual interrupts are simple: G0 are always FIQ, and G1 IRQ */ + /* + * Virtual interrupts are simple: G0 are always FIQ, and G1 are + * IRQ or NMI which depends on the ICH_LR<n>_EL2.NMI to have + * non-maskable property. + */ if (lr & ICH_LR_EL2_GROUP) { - irqlevel = 1; + if (lr & ICH_LR_EL2_NMI) { + nmilevel = 1; + } else { + irqlevel = 1; + } } else { fiqlevel = 1; } @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) trace_gicv3_cpuif_virt_set_irqs(gicv3_redist_affid(cs), fiqlevel, irqlevel); qemu_set_irq(cs->parent_vfiq, fiqlevel); qemu_set_irq(cs->parent_virq, irqlevel); + qemu_set_irq(cs->parent_vnmi, nmilevel); } static void gicv3_cpuif_virt_update(GICv3CPUState *cs) -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Enable FEAT_NMI on the 'max' CPU. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-24-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_MTE (Memory Tagging Extension) - FEAT_MTE2 (Memory Tagging Extension) - FEAT_MTE3 (MTE Asymmetric Fault Handling) +- FEAT_NMI (Non-maskable Interrupt) - FEAT_NV (Nested Virtualization) - FEAT_NV2 (Enhanced nested virtualization support) - FEAT_PACIMP (Pointer authentication - IMPLEMENTATION DEFINED algorithm) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR1, RAS_FRAC, 0); /* FEAT_RASv1p1 + FEAT_DoubleFault */ t = FIELD_DP64(t, ID_AA64PFR1, SME, 1); /* FEAT_SME */ t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ + t = FIELD_DP64(t, ID_AA64PFR1, NMI, 1); /* FEAT_NMI */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> If the CPU implements FEAT_NMI, then turn on the NMI support in the GICv3 too. It's permitted to have a configuration with FEAT_NMI in the CPU (and thus NMI support in the CPU interfaces too) but no NMI support in the distributor and redistributor, but this isn't a very useful setup as it's close to having no NMI support at all. We don't need to gate the enabling of NMI in the GIC behind a machine version property, because none of our current CPUs implement FEAT_NMI, and '-cpu max' is not something we maintain migration compatibility across versions for. So we can always enable the GIC NMI support when the CPU has it. Neither hvf nor KVM support NMI in the GIC yet, so we don't enable it unless we're using TCG. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240407081733.3231820-25-ruanjinjie@huawei.com [PMM: Update comment and commit message] Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_v2m(VirtMachineState *vms) vms->msi_controller = VIRT_MSI_CTRL_GICV2M; } +/* + * If the CPU has FEAT_NMI, then turn on the NMI support in the GICv3 too. + * It's permitted to have a configuration with NMI in the CPU (and thus the + * GICv3 CPU interface) but not in the distributor/redistributors, but it's + * not very useful. + */ +static bool gicv3_nmi_present(VirtMachineState *vms) +{ + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0)); + + return tcg_enabled() && cpu_isar_feature(aa64_nmi, cpu) && + (vms->gic_version != VIRT_GIC_VERSION_2); +} + static void create_gic(VirtMachineState *vms, MemoryRegion *mem) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) vms->virt); } } + + if (gicv3_nmi_present(vms)) { + qdev_prop_set_bit(vms->gic, "has-nmi", true); + } + gicbusdev = SYS_BUS_DEVICE(vms->gic); sysbus_realize_and_unref(gicbusdev, &error_fatal); sysbus_mmio_map(gicbusdev, 0, vms->memmap[VIRT_GIC_DIST].base); -- 2.34.1 From: Anastasia Belova <abelova@astralinux.ru> In soc_dma_set_request() we try to set a bit in a uint64_t, but we do it with "1 << ch->num", which can't set any bits past 31; any use for a channel number of 32 or more would fail due to integer overflow. This doesn't happen in practice for our current use of this code, because the worst case is when we call soc_dma_init() with an argument of 32 for the number of channels, and QEMU builds with -fwrapv so the shift into the sign bit is well-defined. However, it's obviously not the intended behaviour of the code. Add casts to force the shift to be done as 64-bit arithmetic, allowing up to 64 channels. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: afbb5194d4 ("Handle on-chip DMA controllers in one place, convert OMAP DMA to use it.") Signed-off-by: Anastasia Belova <abelova@astralinux.ru> Message-id: 20240409115301.21829-1-abelova@astralinux.ru [PMM: Edit commit message to clarify that this doesn't actually bite us in our current usage of this code.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/soc_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/dma/soc_dma.c b/hw/dma/soc_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/soc_dma.c +++ b/hw/dma/soc_dma.c @@ -XXX,XX +XXX,XX @@ void soc_dma_set_request(struct soc_dma_ch_s *ch, int level) dma->enabled_count += level - ch->enable; if (level) - dma->ch_enable_mask |= 1 << ch->num; + dma->ch_enable_mask |= (uint64_t)1 << ch->num; else - dma->ch_enable_mask &= ~(1 << ch->num); + dma->ch_enable_mask &= ~((uint64_t)1 << ch->num); if (level != ch->enable) { soc_dma_ch_freq_update(dma); -- 2.34.1 Ever since the bFLT format support was added in 2006, there has been a chunk of code in the file guarded by CONFIG_BINFMT_SHARED_FLAT which is supposedly for shared library support. This is not enabled and it's not possible to enable it, because if you do you'll run into the "#error needs checking" in the calc_reloc() function. Similarly, CONFIG_BINFMT_ZFLAT exists but can't be enabled because of an "#error code needs checking" in load_flat_file(). This code is obviously unfinished and has never been used; nobody in the intervening 18 years has complained about this or fixed it, so just delete the dead code. If anybody ever wants the feature they can always pull it out of git, or (perhaps better) write it from scratch based on the current Linux bFLT loader rather than the one of 18 years ago. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240411115313.680433-1-peter.maydell@linaro.org --- linux-user/flat.h | 5 +- linux-user/flatload.c | 293 ++---------------------------------------- 2 files changed, 11 insertions(+), 287 deletions(-) diff --git a/linux-user/flat.h b/linux-user/flat.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/flat.h +++ b/linux-user/flat.h @@ -XXX,XX +XXX,XX @@ #define FLAT_VERSION 0x00000004L -#ifdef CONFIG_BINFMT_SHARED_FLAT -#define MAX_SHARED_LIBS (4) -#else +/* QEMU doesn't support bflt shared libraries */ #define MAX_SHARED_LIBS (1) -#endif /* * To make everything easier to port and manage cross platform diff --git a/linux-user/flatload.c b/linux-user/flatload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/flatload.c +++ b/linux-user/flatload.c @@ -XXX,XX +XXX,XX @@ * JAN/99 -- coded full program relocation (gerg@snapgear.com) */ -/* ??? ZFLAT and shared library support is currently disabled. */ - /****************************************************************************/ #include "qemu/osdep.h" @@ -XXX,XX +XXX,XX @@ struct lib_info { short loaded; /* Has this library been loaded? */ }; -#ifdef CONFIG_BINFMT_SHARED_FLAT -static int load_flat_shared_library(int id, struct lib_info *p); -#endif - struct linux_binprm; /****************************************************************************/ @@ -XXX,XX +XXX,XX @@ static int target_pread(int fd, abi_ulong ptr, abi_ulong len, unlock_user(buf, ptr, len); return ret; } -/****************************************************************************/ - -#ifdef CONFIG_BINFMT_ZFLAT - -#include <linux/zlib.h> - -#define LBUFSIZE 4000 - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -static int decompress_exec( - struct linux_binprm *bprm, - unsigned long offset, - char *dst, - long len, - int fd) -{ - unsigned char *buf; - z_stream strm; - loff_t fpos; - int ret, retval; - - DBG_FLT("decompress_exec(offset=%x,buf=%x,len=%x)\n",(int)offset, (int)dst, (int)len); - - memset(&strm, 0, sizeof(strm)); - strm.workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL); - if (strm.workspace == NULL) { - DBG_FLT("binfmt_flat: no memory for decompress workspace\n"); - return -ENOMEM; - } - buf = kmalloc(LBUFSIZE, GFP_KERNEL); - if (buf == NULL) { - DBG_FLT("binfmt_flat: no memory for read buffer\n"); - retval = -ENOMEM; - goto out_free; - } - - /* Read in first chunk of data and parse gzip header. */ - fpos = offset; - ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos); - - strm.next_in = buf; - strm.avail_in = ret; - strm.total_in = 0; - - retval = -ENOEXEC; - - /* Check minimum size -- gzip header */ - if (ret < 10) { - DBG_FLT("binfmt_flat: file too small?\n"); - goto out_free_buf; - } - - /* Check gzip magic number */ - if ((buf[0] != 037) || ((buf[1] != 0213) && (buf[1] != 0236))) { - DBG_FLT("binfmt_flat: unknown compression magic?\n"); - goto out_free_buf; - } - - /* Check gzip method */ - if (buf[2] != 8) { - DBG_FLT("binfmt_flat: unknown compression method?\n"); - goto out_free_buf; - } - /* Check gzip flags */ - if ((buf[3] & ENCRYPTED) || (buf[3] & CONTINUATION) || - (buf[3] & RESERVED)) { - DBG_FLT("binfmt_flat: unknown flags?\n"); - goto out_free_buf; - } - - ret = 10; - if (buf[3] & EXTRA_FIELD) { - ret += 2 + buf[10] + (buf[11] << 8); - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (EXTRA)?\n"); - goto out_free_buf; - } - } - if (buf[3] & ORIG_NAME) { - for (; ret < LBUFSIZE && (buf[ret] != 0); ret++) - ; - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (ORIG_NAME)?\n"); - goto out_free_buf; - } - } - if (buf[3] & COMMENT) { - for (; ret < LBUFSIZE && (buf[ret] != 0); ret++) - ; - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (COMMENT)?\n"); - goto out_free_buf; - } - } - - strm.next_in += ret; - strm.avail_in -= ret; - - strm.next_out = dst; - strm.avail_out = len; - strm.total_out = 0; - - if (zlib_inflateInit2(&strm, -MAX_WBITS) != Z_OK) { - DBG_FLT("binfmt_flat: zlib init failed?\n"); - goto out_free_buf; - } - - while ((ret = zlib_inflate(&strm, Z_NO_FLUSH)) == Z_OK) { - ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos); - if (ret <= 0) - break; - if (is_error(ret)) { - break; - } - len -= ret; - - strm.next_in = buf; - strm.avail_in = ret; - strm.total_in = 0; - } - - if (ret < 0) { - DBG_FLT("binfmt_flat: decompression failed (%d), %s\n", - ret, strm.msg); - goto out_zlib; - } - - retval = 0; -out_zlib: - zlib_inflateEnd(&strm); -out_free_buf: - kfree(buf); -out_free: - kfree(strm.workspace); -out: - return retval; -} - -#endif /* CONFIG_BINFMT_ZFLAT */ /****************************************************************************/ @@ -XXX,XX +XXX,XX @@ calc_reloc(abi_ulong r, struct lib_info *p, int curid, int internalp) abi_ulong text_len; abi_ulong start_code; -#ifdef CONFIG_BINFMT_SHARED_FLAT -#error needs checking - if (r == 0) - id = curid; /* Relocs of 0 are always self referring */ - else { - id = (r >> 24) & 0xff; /* Find ID for this reloc */ - r &= 0x00ffffff; /* Trim ID off here */ - } - if (id >= MAX_SHARED_LIBS) { - fprintf(stderr, "BINFMT_FLAT: reference 0x%x to shared library %d\n", - (unsigned) r, id); - goto failed; - } - if (curid != id) { - if (internalp) { - fprintf(stderr, "BINFMT_FLAT: reloc address 0x%x not " - "in same module (%d != %d)\n", - (unsigned) r, curid, id); - goto failed; - } else if (!p[id].loaded && is_error(load_flat_shared_library(id, p))) { - fprintf(stderr, "BINFMT_FLAT: failed to load library %d\n", id); - goto failed; - } - /* Check versioning information (i.e. time stamps) */ - if (p[id].build_date && p[curid].build_date - && p[curid].build_date < p[id].build_date) { - fprintf(stderr, "BINFMT_FLAT: library %d is younger than %d\n", - id, curid); - goto failed; - } - } -#else id = 0; -#endif start_brk = p[id].start_brk; start_data = p[id].start_data; @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, if (rev == OLD_FLAT_VERSION && flat_old_ram_flag(flags)) flags = FLAT_FLAG_RAM; -#ifndef CONFIG_BINFMT_ZFLAT if (flags & (FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA)) { - fprintf(stderr, "Support for ZFLAT executables is not enabled\n"); + fprintf(stderr, "ZFLAT executables are not supported\n"); return -ENOEXEC; } -#endif /* * calculate the extra space we need to map in @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, (int)(data_len + bss_len + stack_len), (int)datapos); fpos = ntohl(hdr->data_start); -#ifdef CONFIG_BINFMT_ZFLAT - if (flags & FLAT_FLAG_GZDATA) { - result = decompress_exec(bprm, fpos, (char *) datapos, - data_len + (relocs * sizeof(abi_ulong))) - } else -#endif - { - result = target_pread(bprm->src.fd, datapos, - data_len + (relocs * sizeof(abi_ulong)), - fpos); - } + result = target_pread(bprm->src.fd, datapos, + data_len + (relocs * sizeof(abi_ulong)), + fpos); if (result < 0) { fprintf(stderr, "Unable to read data+bss\n"); return result; @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, datapos = realdatastart + indx_len; reloc = (textpos + ntohl(hdr->reloc_start) + indx_len); -#ifdef CONFIG_BINFMT_ZFLAT -#error code needs checking - /* - * load it all in and treat it like a RAM load from now on - */ - if (flags & FLAT_FLAG_GZIP) { - result = decompress_exec(bprm, sizeof (struct flat_hdr), - (((char *) textpos) + sizeof (struct flat_hdr)), - (text_len + data_len + (relocs * sizeof(unsigned long)) - - sizeof (struct flat_hdr)), - 0); - memmove((void *) datapos, (void *) realdatastart, - data_len + (relocs * sizeof(unsigned long))); - } else if (flags & FLAT_FLAG_GZDATA) { - fpos = 0; - result = bprm->file->f_op->read(bprm->file, - (char *) textpos, text_len, &fpos); - if (!is_error(result)) { - result = decompress_exec(bprm, text_len, (char *) datapos, - data_len + (relocs * sizeof(unsigned long)), 0); - } - } - else -#endif - { - result = target_pread(bprm->src.fd, textpos, - text_len, 0); - if (result >= 0) { - result = target_pread(bprm->src.fd, datapos, - data_len + (relocs * sizeof(abi_ulong)), - ntohl(hdr->data_start)); - } + result = target_pread(bprm->src.fd, textpos, + text_len, 0); + if (result >= 0) { + result = target_pread(bprm->src.fd, datapos, + data_len + (relocs * sizeof(abi_ulong)), + ntohl(hdr->data_start)); } if (result < 0) { fprintf(stderr, "Unable to read code+data+bss\n"); @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, /****************************************************************************/ -#ifdef CONFIG_BINFMT_SHARED_FLAT - -/* - * Load a shared library into memory. The library gets its own data - * segment (including bss) but not argv/argc/environ. - */ - -static int load_flat_shared_library(int id, struct lib_info *libs) -{ - struct linux_binprm bprm; - int res; - char buf[16]; - - /* Create the file name */ - sprintf(buf, "/lib/lib%d.so", id); - - /* Open the file up */ - bprm.filename = buf; - bprm.file = open_exec(bprm.filename); - res = PTR_ERR(bprm.file); - if (IS_ERR(bprm.file)) - return res; - - res = prepare_binprm(&bprm); - - if (!is_error(res)) { - res = load_flat_file(&bprm, libs, id, NULL); - } - if (bprm.file) { - allow_write_access(bprm.file); - fput(bprm.file); - bprm.file = NULL; - } - return(res); -} - -#endif /* CONFIG_BINFMT_SHARED_FLAT */ - int load_flt_binary(struct linux_binprm *bprm, struct image_info *info) { struct lib_info libinfo[MAX_SHARED_LIBS]; @@ -XXX,XX +XXX,XX @@ int load_flt_binary(struct linux_binprm *bprm, struct image_info *info) */ start_addr = libinfo[0].entry; -#ifdef CONFIG_BINFMT_SHARED_FLAT -#error here - for (i = MAX_SHARED_LIBS-1; i>0; i--) { - if (libinfo[i].loaded) { - /* Push previous first to call address */ - --sp; - if (put_user_ual(start_addr, sp)) - return -EFAULT; - start_addr = libinfo[i].entry; - } - } -#endif - /* Stash our initial stack pointer into the mm structure */ info->start_code = libinfo[0].start_code; info->end_code = libinfo[0].start_code + libinfo[0].text_len; -- 2.34.1 The npcm7xx_clk and npcm7xx_gcr device reset methods look at the ResetType argument and only handle RESET_TYPE_COLD, producing a warning if another reset type is passed. This is different from how every other three-phase-reset method we have works, and makes it difficult to add new reset types. A better pattern is "assume that any reset type you don't know about should be handled like RESET_TYPE_COLD"; switch these devices to do that. Then adding a new reset type will only need to touch those devices where its behaviour really needs to be different from the standard cold reset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-2-peter.maydell@linaro.org --- hw/misc/npcm7xx_clk.c | 13 +++---------- hw/misc/npcm7xx_gcr.c | 12 ++++-------- 2 files changed, 7 insertions(+), 18 deletions(-) diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type) QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); - switch (type) { - case RESET_TYPE_COLD: - memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); - s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - npcm7xx_clk_update_all_clocks(s); - return; - } - + memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); + s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + npcm7xx_clk_update_all_clocks(s); /* * A small number of registers need to be reset on a core domain reset, * but no such reset type exists yet. */ - qemu_log_mask(LOG_UNIMP, "%s: reset type %d not implemented.", - __func__, type); } static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s) diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_gcr.c +++ b/hw/misc/npcm7xx_gcr.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_enter_reset(Object *obj, ResetType type) QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); - switch (type) { - case RESET_TYPE_COLD: - memcpy(s->regs, cold_reset_values, sizeof(s->regs)); - s->regs[NPCM7XX_GCR_PWRON] = s->reset_pwron; - s->regs[NPCM7XX_GCR_MDLR] = s->reset_mdlr; - s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; - break; - } + memcpy(s->regs, cold_reset_values, sizeof(s->regs)); + s->regs[NPCM7XX_GCR_PWRON] = s->reset_pwron; + s->regs[NPCM7XX_GCR_MDLR] = s->reset_mdlr; + s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; } static void npcm7xx_gcr_realize(DeviceState *dev, Error **errp) -- 2.34.1 Rather than directly calling the device's implementation of its 'hold' reset phase, call device_cold_reset(). This means we don't have to adjust this callsite when we add another argument to the function signature for the hold and exit reset methods. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-3-peter.maydell@linaro.org --- hw/i2c/allwinner-i2c.c | 3 +-- hw/sensor/adm1272.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/allwinner-i2c.c +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ static void allwinner_i2c_write(void *opaque, hwaddr offset, break; case TWI_SRST_REG: if (((value & TWI_SRST_MASK) == 0) && (s->srst & TWI_SRST_MASK)) { - /* Perform reset */ - allwinner_i2c_reset_hold(OBJECT(s)); + device_cold_reset(DEVICE(s)); } s->srst = value & TWI_SRST_MASK; break; diff --git a/hw/sensor/adm1272.c b/hw/sensor/adm1272.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1272.c +++ b/hw/sensor/adm1272.c @@ -XXX,XX +XXX,XX @@ static int adm1272_write_data(PMBusDevice *pmdev, const uint8_t *buf, break; case ADM1272_MFR_POWER_CYCLE: - adm1272_exit_reset((Object *)s); + device_cold_reset(DEVICE(s)); break; case ADM1272_HYSTERESIS_LOW: -- 2.34.1 We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. We should pass the type to all three of the phase methods to avoid having to do that. This coccinelle script adds the ResetType argument to the hold and exit phases of the Resettable interface. The first part of the script (rules holdfn_assigned, holdfn_defined, exitfn_assigned, exitfn_defined) update implementations of the interface within device models, both to change the signature of their method implementations and to pass on the reset type when they invoke reset on some other device. The second part of the script is various special cases: * method callsites in resettable_phase_hold(), resettable_phase_exit() and device_phases_reset() * updating the typedefs for the methods * isl_pmbus_vr.c has some code where one device's reset method directly calls the implementation of a different device's method Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-4-peter.maydell@linaro.org --- scripts/coccinelle/reset-type.cocci | 133 ++++++++++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 scripts/coccinelle/reset-type.cocci diff --git a/scripts/coccinelle/reset-type.cocci b/scripts/coccinelle/reset-type.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/reset-type.cocci @@ -XXX,XX +XXX,XX @@ +// Convert device code using three-phase reset to add a ResetType +// argument to implementations of ResettableHoldPhase and +// ResettableEnterPhase methods. +// +// Copyright Linaro Ltd 2024 +// SPDX-License-Identifier: GPL-2.0-or-later +// +// for dir in include hw target; do \ +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/reset-type.cocci \ +// --keep-comments --smpl-spacing --in-place --include-headers \ +// --dir $dir; done +// +// This coccinelle script aims to produce a complete change that needs +// no human interaction, so as well as the generic "update device +// implementations of the hold and exit phase methods" it includes +// the special-case transformations needed for the core code and for +// one device model that does something a bit nonstandard. Those +// special cases are at the end of the file. + +// Look for where we use a function as a ResettableHoldPhase method, +// either by directly assigning it to phases.hold or by calling +// resettable_class_set_parent_phases, and remember the function name. +@ holdfn_assigned @ +identifier enterfn, holdfn, exitfn; +identifier rc; +expression e; +@@ +ResettableClass *rc; +... +( + rc->phases.hold = holdfn; +| + resettable_class_set_parent_phases(rc, enterfn, holdfn, exitfn, e); +) + +// Look for the definition of the function we found in holdfn_assigned, +// and add the new argument. If the function calls a hold function +// itself (probably chaining to the parent class reset) then add the +// new argument there too. +@ holdfn_defined @ +identifier holdfn_assigned.holdfn; +typedef Object; +identifier obj; +expression parent; +@@ +-holdfn(Object *obj) ++holdfn(Object *obj, ResetType type) +{ + <... +- parent.hold(obj) ++ parent.hold(obj, type) + ...> +} + +// Similarly for ResettableExitPhase. +@ exitfn_assigned @ +identifier enterfn, holdfn, exitfn; +identifier rc; +expression e; +@@ +ResettableClass *rc; +... +( + rc->phases.exit = exitfn; +| + resettable_class_set_parent_phases(rc, enterfn, holdfn, exitfn, e); +) +@ exitfn_defined @ +identifier exitfn_assigned.exitfn; +typedef Object; +identifier obj; +expression parent; +@@ +-exitfn(Object *obj) ++exitfn(Object *obj, ResetType type) +{ + <... +- parent.exit(obj) ++ parent.exit(obj, type) + ...> +} + +// SPECIAL CASES ONLY BELOW HERE +// We use a python scripted constraint on the position of the match +// to ensure that they only match in a particular function. See +// https://public-inbox.org/git/alpine.DEB.2.21.1808240652370.2344@hadrien/ +// which recommends this as the way to do "match only in this function". + +// Special case: isl_pmbus_vr.c has some reset methods calling others directly +@ isl_pmbus_vr @ +identifier obj; +@@ +- isl_pmbus_vr_exit_reset(obj); ++ isl_pmbus_vr_exit_reset(obj, type); + +// Special case: device_phases_reset() needs to pass RESET_TYPE_COLD +@ device_phases_reset_hold @ +expression obj; +identifier rc; +identifier phase; +position p : script:python() { p[0].current_element == "device_phases_reset" }; +@@ +- rc->phases.phase(obj)@p ++ rc->phases.phase(obj, RESET_TYPE_COLD) + +// Special case: in resettable_phase_hold() and resettable_phase_exit() +// we need to pass through the ResetType argument to the method being called +@ resettable_phase_hold @ +expression obj; +identifier rc; +position p : script:python() { p[0].current_element == "resettable_phase_hold" }; +@@ +- rc->phases.hold(obj)@p ++ rc->phases.hold(obj, type) +@ resettable_phase_exit @ +expression obj; +identifier rc; +position p : script:python() { p[0].current_element == "resettable_phase_exit" }; +@@ +- rc->phases.exit(obj)@p ++ rc->phases.exit(obj, type) +// Special case: the typedefs for the methods need to declare the new argument +@ phase_typedef_hold @ +identifier obj; +@@ +- typedef void (*ResettableHoldPhase)(Object *obj); ++ typedef void (*ResettableHoldPhase)(Object *obj, ResetType type); +@ phase_typedef_exit @ +identifier obj; +@@ +- typedef void (*ResettableExitPhase)(Object *obj); ++ typedef void (*ResettableExitPhase)(Object *obj, ResetType type); -- 2.34.1 We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. Pass the type to all three of the phase methods to avoid having to do that. Commit created with for dir in hw target include; do \ spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/reset-type.cocci \ --keep-comments --smpl-spacing --in-place \ --include-headers --dir $dir; done and no manual edits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org --- include/hw/resettable.h | 4 ++-- hw/adc/npcm7xx_adc.c | 2 +- hw/arm/pxa2xx_pic.c | 2 +- hw/arm/smmu-common.c | 2 +- hw/arm/smmuv3.c | 4 ++-- hw/arm/stellaris.c | 10 +++++----- hw/audio/asc.c | 2 +- hw/char/cadence_uart.c | 2 +- hw/char/sifive_uart.c | 2 +- hw/core/cpu-common.c | 2 +- hw/core/qdev.c | 4 ++-- hw/core/reset.c | 2 +- hw/core/resettable.c | 4 ++-- hw/display/virtio-vga.c | 4 ++-- hw/gpio/npcm7xx_gpio.c | 2 +- hw/gpio/pl061.c | 2 +- hw/gpio/stm32l4x5_gpio.c | 2 +- hw/hyperv/vmbus.c | 2 +- hw/i2c/allwinner-i2c.c | 2 +- hw/i2c/npcm7xx_smbus.c | 2 +- hw/input/adb.c | 2 +- hw/input/ps2.c | 12 ++++++------ hw/intc/arm_gic_common.c | 2 +- hw/intc/arm_gic_kvm.c | 4 ++-- hw/intc/arm_gicv3_common.c | 2 +- hw/intc/arm_gicv3_its.c | 4 ++-- hw/intc/arm_gicv3_its_common.c | 2 +- hw/intc/arm_gicv3_its_kvm.c | 4 ++-- hw/intc/arm_gicv3_kvm.c | 4 ++-- hw/intc/xics.c | 2 +- hw/m68k/q800-glue.c | 2 +- hw/misc/djmemc.c | 2 +- hw/misc/iosb.c | 2 +- hw/misc/mac_via.c | 8 ++++---- hw/misc/macio/cuda.c | 4 ++-- hw/misc/macio/pmu.c | 4 ++-- hw/misc/mos6522.c | 2 +- hw/misc/npcm7xx_mft.c | 2 +- hw/misc/npcm7xx_pwm.c | 2 +- hw/misc/stm32l4x5_exti.c | 2 +- hw/misc/stm32l4x5_rcc.c | 10 +++++----- hw/misc/stm32l4x5_syscfg.c | 2 +- hw/misc/xlnx-versal-cframe-reg.c | 2 +- hw/misc/xlnx-versal-crl.c | 2 +- hw/misc/xlnx-versal-pmc-iou-slcr.c | 2 +- hw/misc/xlnx-versal-trng.c | 2 +- hw/misc/xlnx-versal-xramc.c | 2 +- hw/misc/xlnx-zynqmp-apu-ctrl.c | 2 +- hw/misc/xlnx-zynqmp-crf.c | 2 +- hw/misc/zynq_slcr.c | 4 ++-- hw/net/can/xlnx-zynqmp-can.c | 2 +- hw/net/e1000.c | 2 +- hw/net/e1000e.c | 2 +- hw/net/igb.c | 2 +- hw/net/igbvf.c | 2 +- hw/nvram/xlnx-bbram.c | 2 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 2 +- hw/nvram/xlnx-zynqmp-efuse.c | 2 +- hw/pci-bridge/cxl_root_port.c | 4 ++-- hw/pci-bridge/pcie_root_port.c | 2 +- hw/pci-host/bonito.c | 2 +- hw/pci-host/pnv_phb.c | 4 ++-- hw/pci-host/pnv_phb3_msi.c | 4 ++-- hw/pci/pci.c | 4 ++-- hw/rtc/mc146818rtc.c | 2 +- hw/s390x/css-bridge.c | 2 +- hw/sensor/adm1266.c | 2 +- hw/sensor/adm1272.c | 2 +- hw/sensor/isl_pmbus_vr.c | 10 +++++----- hw/sensor/max31785.c | 2 +- hw/sensor/max34451.c | 2 +- hw/ssi/npcm7xx_fiu.c | 2 +- hw/timer/etraxfs_timer.c | 2 +- hw/timer/npcm7xx_timer.c | 2 +- hw/usb/hcd-dwc2.c | 8 ++++---- hw/usb/xlnx-versal-usb2-ctrl-regs.c | 2 +- hw/virtio/virtio-pci.c | 2 +- target/arm/cpu.c | 4 ++-- target/avr/cpu.c | 4 ++-- target/cris/cpu.c | 4 ++-- target/hexagon/cpu.c | 4 ++-- target/i386/cpu.c | 4 ++-- target/loongarch/cpu.c | 4 ++-- target/m68k/cpu.c | 4 ++-- target/microblaze/cpu.c | 4 ++-- target/mips/cpu.c | 4 ++-- target/openrisc/cpu.c | 4 ++-- target/ppc/cpu_init.c | 4 ++-- target/riscv/cpu.c | 4 ++-- target/rx/cpu.c | 4 ++-- target/sh4/cpu.c | 4 ++-- target/sparc/cpu.c | 4 ++-- target/tricore/cpu.c | 4 ++-- target/xtensa/cpu.c | 4 ++-- 94 files changed, 150 insertions(+), 150 deletions(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ typedef enum ResetType { * the callback. */ typedef void (*ResettableEnterPhase)(Object *obj, ResetType type); -typedef void (*ResettableHoldPhase)(Object *obj); -typedef void (*ResettableExitPhase)(Object *obj); +typedef void (*ResettableHoldPhase)(Object *obj, ResetType type); +typedef void (*ResettableExitPhase)(Object *obj, ResetType type); typedef ResettableState * (*ResettableGetState)(Object *obj); typedef void (*ResettableTrFunction)(Object *obj); typedef ResettableTrFunction (*ResettableGetTrFunction)(Object *obj); diff --git a/hw/adc/npcm7xx_adc.c b/hw/adc/npcm7xx_adc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/adc/npcm7xx_adc.c +++ b/hw/adc/npcm7xx_adc.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_adc_enter_reset(Object *obj, ResetType type) npcm7xx_adc_reset(s); } -static void npcm7xx_adc_hold_reset(Object *obj) +static void npcm7xx_adc_hold_reset(Object *obj, ResetType type) { NPCM7xxADCState *s = NPCM7XX_ADC(obj); diff --git a/hw/arm/pxa2xx_pic.c b/hw/arm/pxa2xx_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_pic.c +++ b/hw/arm/pxa2xx_pic.c @@ -XXX,XX +XXX,XX @@ static int pxa2xx_pic_post_load(void *opaque, int version_id) return 0; } -static void pxa2xx_pic_reset_hold(Object *obj) +static void pxa2xx_pic_reset_hold(Object *obj, ResetType type) { PXA2xxPICState *s = PXA2XX_PIC(obj); diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static void smmu_base_realize(DeviceState *dev, Error **errp) } } -static void smmu_base_reset_hold(Object *obj) +static void smmu_base_reset_hold(Object *obj, ResetType type) { SMMUState *s = ARM_SMMU(obj); diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmu_init_irq(SMMUv3State *s, SysBusDevice *dev) } } -static void smmu_reset_hold(Object *obj) +static void smmu_reset_hold(Object *obj, ResetType type) { SMMUv3State *s = ARM_SMMUV3(obj); SMMUv3Class *c = ARM_SMMUV3_GET_CLASS(s); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } smmuv3_init_regs(s); diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_enter(Object *obj, ResetType type) s->dcgc[0] = 1; } -static void stellaris_sys_reset_hold(Object *obj) +static void stellaris_sys_reset_hold(Object *obj, ResetType type) { ssys_state *s = STELLARIS_SYS(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) ssys_calculate_system_clock(s, true); } -static void stellaris_sys_reset_exit(Object *obj) +static void stellaris_sys_reset_exit(Object *obj, ResetType type) { } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset_enter(Object *obj, ResetType type) i2c_end_transfer(s->bus); } -static void stellaris_i2c_reset_hold(Object *obj) +static void stellaris_i2c_reset_hold(Object *obj, ResetType type) { stellaris_i2c_state *s = STELLARIS_I2C(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset_hold(Object *obj) s->mcr = 0; } -static void stellaris_i2c_reset_exit(Object *obj) +static void stellaris_i2c_reset_exit(Object *obj, ResetType type) { stellaris_i2c_state *s = STELLARIS_I2C(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset_hold(Object *obj) +static void stellaris_adc_reset_hold(Object *obj, ResetType type) { StellarisADCState *s = STELLARIS_ADC(obj); int n; diff --git a/hw/audio/asc.c b/hw/audio/asc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/audio/asc.c +++ b/hw/audio/asc.c @@ -XXX,XX +XXX,XX @@ static void asc_fifo_init(ASCFIFOState *fs, int index) g_free(name); } -static void asc_reset_hold(Object *obj) +static void asc_reset_hold(Object *obj, ResetType type) { ASCState *s = ASC(obj); diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ static void cadence_uart_reset_init(Object *obj, ResetType type) s->r[R_TTRIG] = 0x00000020; } -static void cadence_uart_reset_hold(Object *obj) +static void cadence_uart_reset_hold(Object *obj, ResetType type) { CadenceUARTState *s = CADENCE_UART(obj); diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ static void sifive_uart_reset_enter(Object *obj, ResetType type) s->rx_fifo_len = 0; } -static void sifive_uart_reset_hold(Object *obj) +static void sifive_uart_reset_hold(Object *obj, ResetType type) { SiFiveUARTState *s = SIFIVE_UART(obj); qemu_irq_lower(s->irq); diff --git a/hw/core/cpu-common.c b/hw/core/cpu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/cpu-common.c +++ b/hw/core/cpu-common.c @@ -XXX,XX +XXX,XX @@ void cpu_reset(CPUState *cpu) trace_cpu_reset(cpu->cpu_index); } -static void cpu_common_reset_hold(Object *obj) +static void cpu_common_reset_hold(Object *obj, ResetType type) { CPUState *cpu = CPU(obj); CPUClass *cc = CPU_GET_CLASS(cpu); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void device_phases_reset(DeviceState *dev) rc->phases.enter(OBJECT(dev), RESET_TYPE_COLD); } if (rc->phases.hold) { - rc->phases.hold(OBJECT(dev)); + rc->phases.hold(OBJECT(dev), RESET_TYPE_COLD); } if (rc->phases.exit) { - rc->phases.exit(OBJECT(dev)); + rc->phases.exit(OBJECT(dev), RESET_TYPE_COLD); } } diff --git a/hw/core/reset.c b/hw/core/reset.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/reset.c +++ b/hw/core/reset.c @@ -XXX,XX +XXX,XX @@ static ResettableState *legacy_reset_get_state(Object *obj) return &lr->reset_state; } -static void legacy_reset_hold(Object *obj) +static void legacy_reset_hold(Object *obj, ResetType type) { LegacyReset *lr = LEGACY_RESET(obj); diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ static void resettable_phase_hold(Object *obj, void *opaque, ResetType type) trace_resettable_transitional_function(obj, obj_typename); tr_func(obj); } else if (rc->phases.hold) { - rc->phases.hold(obj); + rc->phases.hold(obj, type); } } trace_resettable_phase_hold_end(obj, obj_typename, s->count); @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) if (--s->count == 0) { trace_resettable_phase_exit_exec(obj, obj_typename, !!rc->phases.exit); if (rc->phases.exit && !resettable_get_tr_func(rc, obj)) { - rc->phases.exit(obj); + rc->phases.exit(obj, type); } } s->exit_phase_in_progress = false; diff --git a/hw/display/virtio-vga.c b/hw/display/virtio-vga.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/virtio-vga.c +++ b/hw/display/virtio-vga.c @@ -XXX,XX +XXX,XX @@ static void virtio_vga_base_realize(VirtIOPCIProxy *vpci_dev, Error **errp) } } -static void virtio_vga_base_reset_hold(Object *obj) +static void virtio_vga_base_reset_hold(Object *obj, ResetType type) { VirtIOVGABaseClass *klass = VIRTIO_VGA_BASE_GET_CLASS(obj); VirtIOVGABase *vvga = VIRTIO_VGA_BASE(obj); /* reset virtio-gpu */ if (klass->parent_phases.hold) { - klass->parent_phases.hold(obj); + klass->parent_phases.hold(obj, type); } /* reset vga */ diff --git a/hw/gpio/npcm7xx_gpio.c b/hw/gpio/npcm7xx_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/npcm7xx_gpio.c +++ b/hw/gpio/npcm7xx_gpio.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gpio_enter_reset(Object *obj, ResetType type) s->regs[NPCM7XX_GPIO_ODSC] = s->reset_odsc; } -static void npcm7xx_gpio_hold_reset(Object *obj) +static void npcm7xx_gpio_hold_reset(Object *obj, ResetType type) { NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static void pl061_enter_reset(Object *obj, ResetType type) s->amsel = 0; } -static void pl061_hold_reset(Object *obj) +static void pl061_hold_reset(Object *obj, ResetType type) { PL061State *s = PL061(obj); int i, level; diff --git a/hw/gpio/stm32l4x5_gpio.c b/hw/gpio/stm32l4x5_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/stm32l4x5_gpio.c +++ b/hw/gpio/stm32l4x5_gpio.c @@ -XXX,XX +XXX,XX @@ static bool is_push_pull(Stm32l4x5GpioState *s, unsigned pin) return extract32(s->otyper, pin, 1) == 0; } -static void stm32l4x5_gpio_reset_hold(Object *obj) +static void stm32l4x5_gpio_reset_hold(Object *obj, ResetType type) { Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); diff --git a/hw/hyperv/vmbus.c b/hw/hyperv/vmbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hyperv/vmbus.c +++ b/hw/hyperv/vmbus.c @@ -XXX,XX +XXX,XX @@ static void vmbus_unrealize(BusState *bus) qemu_mutex_destroy(&vmbus->rx_queue_lock); } -static void vmbus_reset_hold(Object *obj) +static void vmbus_reset_hold(Object *obj, ResetType type) { vmbus_deinit(VMBUS(obj)); } diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/allwinner-i2c.c +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ static inline bool allwinner_i2c_interrupt_is_enabled(AWI2CState *s) return s->cntr & TWI_CNTR_INT_EN; } -static void allwinner_i2c_reset_hold(Object *obj) +static void allwinner_i2c_reset_hold(Object *obj, ResetType type) { AWI2CState *s = AW_I2C(obj); diff --git a/hw/i2c/npcm7xx_smbus.c b/hw/i2c/npcm7xx_smbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/npcm7xx_smbus.c +++ b/hw/i2c/npcm7xx_smbus.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_enter_reset(Object *obj, ResetType type) s->rx_cur = 0; } -static void npcm7xx_smbus_hold_reset(Object *obj) +static void npcm7xx_smbus_hold_reset(Object *obj, ResetType type) { NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); diff --git a/hw/input/adb.c b/hw/input/adb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/adb.c +++ b/hw/input/adb.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_adb_bus = { } }; -static void adb_bus_reset_hold(Object *obj) +static void adb_bus_reset_hold(Object *obj, ResetType type) { ADBBusState *adb_bus = ADB_BUS(obj); diff --git a/hw/input/ps2.c b/hw/input/ps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/ps2.c +++ b/hw/input/ps2.c @@ -XXX,XX +XXX,XX @@ void ps2_write_mouse(PS2MouseState *s, int val) } } -static void ps2_reset_hold(Object *obj) +static void ps2_reset_hold(Object *obj, ResetType type) { PS2State *s = PS2_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_reset_hold(Object *obj) ps2_reset_queue(s); } -static void ps2_reset_exit(Object *obj) +static void ps2_reset_exit(Object *obj, ResetType type) { PS2State *s = PS2_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_common_post_load(PS2State *s) q->cwptr = ccount ? (q->rptr + ccount) & (PS2_BUFFER_SIZE - 1) : -1; } -static void ps2_kbd_reset_hold(Object *obj) +static void ps2_kbd_reset_hold(Object *obj, ResetType type) { PS2DeviceClass *ps2dc = PS2_DEVICE_GET_CLASS(obj); PS2KbdState *s = PS2_KBD_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_kbd_reset_hold(Object *obj) trace_ps2_kbd_reset(s); if (ps2dc->parent_phases.hold) { - ps2dc->parent_phases.hold(obj); + ps2dc->parent_phases.hold(obj, type); } s->scan_enabled = 1; @@ -XXX,XX +XXX,XX @@ static void ps2_kbd_reset_hold(Object *obj) s->modifiers = 0; } -static void ps2_mouse_reset_hold(Object *obj) +static void ps2_mouse_reset_hold(Object *obj, ResetType type) { PS2DeviceClass *ps2dc = PS2_DEVICE_GET_CLASS(obj); PS2MouseState *s = PS2_MOUSE_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_mouse_reset_hold(Object *obj) trace_ps2_mouse_reset(s); if (ps2dc->parent_phases.hold) { - ps2dc->parent_phases.hold(obj); + ps2dc->parent_phases.hold(obj, type); } s->mouse_status = 0; diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_common.c +++ b/hw/intc/arm_gic_common.c @@ -XXX,XX +XXX,XX @@ static inline void arm_gic_common_reset_irq_state(GICState *s, int cidx, } } -static void arm_gic_common_reset_hold(Object *obj) +static void arm_gic_common_reset_hold(Object *obj, ResetType type) { GICState *s = ARM_GIC_COMMON(obj); int i, j; diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_get(GICState *s) } } -static void kvm_arm_gic_reset_hold(Object *obj) +static void kvm_arm_gic_reset_hold(Object *obj, ResetType type) { GICState *s = ARM_GIC_COMMON(obj); KVMARMGICClass *kgc = KVM_ARM_GIC_GET_CLASS(s); if (kgc->parent_phases.hold) { - kgc->parent_phases.hold(obj); + kgc->parent_phases.hold(obj, type); } if (kvm_arm_gic_can_save_restore(s)) { diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_finalize(Object *obj) g_free(s->redist_region_count); } -static void arm_gicv3_common_reset_hold(Object *obj) +static void arm_gicv3_common_reset_hold(Object *obj, ResetType type) { GICv3State *s = ARM_GICV3_COMMON(obj); int i; diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static void gicv3_arm_its_realize(DeviceState *dev, Error **errp) } } -static void gicv3_its_reset_hold(Object *obj) +static void gicv3_its_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } /* Quiescent bit reset to 1 */ diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its_common.c +++ b/hw/intc/arm_gicv3_its_common.c @@ -XXX,XX +XXX,XX @@ void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops, msi_nonbroken = true; } -static void gicv3_its_common_reset_hold(Object *obj) +static void gicv3_its_common_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its_kvm.c +++ b/hw/intc/arm_gicv3_its_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_its_post_load(GICv3ITSState *s) GITS_CTLR, &s->ctlr, true, &error_abort); } -static void kvm_arm_its_reset_hold(Object *obj) +static void kvm_arm_its_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); KVMARMITSClass *c = KVM_ARM_ITS_GET_CLASS(s); int i; if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } if (kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; } -static void kvm_arm_gicv3_reset_hold(Object *obj) +static void kvm_arm_gicv3_reset_hold(Object *obj, ResetType type) { GICv3State *s = ARM_GICV3_COMMON(obj); KVMARMGICv3Class *kgc = KVM_ARM_GICV3_GET_CLASS(s); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset_hold(Object *obj) DPRINTF("Reset\n"); if (kgc->parent_phases.hold) { - kgc->parent_phases.hold(obj); + kgc->parent_phases.hold(obj, type); } if (s->migration_blocker) { diff --git a/hw/intc/xics.c b/hw/intc/xics.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xics.c +++ b/hw/intc/xics.c @@ -XXX,XX +XXX,XX @@ static void ics_reset_irq(ICSIRQState *irq) irq->saved_priority = 0xff; } -static void ics_reset_hold(Object *obj) +static void ics_reset_hold(Object *obj, ResetType type) { ICSState *ics = ICS(obj); g_autofree uint8_t *flags = g_malloc(ics->nr_irqs); diff --git a/hw/m68k/q800-glue.c b/hw/m68k/q800-glue.c index XXXXXXX..XXXXXXX 100644 --- a/hw/m68k/q800-glue.c +++ b/hw/m68k/q800-glue.c @@ -XXX,XX +XXX,XX @@ static void glue_nmi_release(void *opaque) GLUE_set_irq(s, GLUE_IRQ_IN_NMI, 0); } -static void glue_reset_hold(Object *obj) +static void glue_reset_hold(Object *obj, ResetType type) { GLUEState *s = GLUE(obj); diff --git a/hw/misc/djmemc.c b/hw/misc/djmemc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/djmemc.c +++ b/hw/misc/djmemc.c @@ -XXX,XX +XXX,XX @@ static void djmemc_init(Object *obj) sysbus_init_mmio(sbd, &s->mem_regs); } -static void djmemc_reset_hold(Object *obj) +static void djmemc_reset_hold(Object *obj, ResetType type) { DJMEMCState *s = DJMEMC(obj); diff --git a/hw/misc/iosb.c b/hw/misc/iosb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iosb.c +++ b/hw/misc/iosb.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iosb_mmio_ops = { .endianness = DEVICE_BIG_ENDIAN, }; -static void iosb_reset_hold(Object *obj) +static void iosb_reset_hold(Object *obj, ResetType type) { IOSBState *s = IOSB(obj); diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mac_via.c +++ b/hw/misc/mac_via.c @@ -XXX,XX +XXX,XX @@ static int via1_post_load(void *opaque, int version_id) } /* VIA 1 */ -static void mos6522_q800_via1_reset_hold(Object *obj) +static void mos6522_q800_via1_reset_hold(Object *obj, ResetType type) { MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(obj); MOS6522State *ms = MOS6522(v1s); @@ -XXX,XX +XXX,XX @@ static void mos6522_q800_via1_reset_hold(Object *obj) ADBBusState *adb_bus = &v1s->adb_bus; if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; @@ -XXX,XX +XXX,XX @@ static void mos6522_q800_via2_portB_write(MOS6522State *s) } } -static void mos6522_q800_via2_reset_hold(Object *obj) +static void mos6522_q800_via2_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; diff --git a/hw/misc/macio/cuda.c b/hw/misc/macio/cuda.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/macio/cuda.c +++ b/hw/misc/macio/cuda.c @@ -XXX,XX +XXX,XX @@ static void mos6522_cuda_portB_write(MOS6522State *s) cuda_update(cs); } -static void mos6522_cuda_reset_hold(Object *obj) +static void mos6522_cuda_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = CUDA_TIMER_FREQ; diff --git a/hw/misc/macio/pmu.c b/hw/misc/macio/pmu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/macio/pmu.c +++ b/hw/misc/macio/pmu.c @@ -XXX,XX +XXX,XX @@ static void mos6522_pmu_portB_write(MOS6522State *s) pmu_update(ps); } -static void mos6522_pmu_reset_hold(Object *obj) +static void mos6522_pmu_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522PMUState *mps = container_of(ms, MOS6522PMUState, parent_obj); @@ -XXX,XX +XXX,XX @@ static void mos6522_pmu_reset_hold(Object *obj) MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; diff --git a/hw/misc/mos6522.c b/hw/misc/mos6522.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mos6522.c +++ b/hw/misc/mos6522.c @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_mos6522 = { } }; -static void mos6522_reset_hold(Object *obj) +static void mos6522_reset_hold(Object *obj, ResetType type) { MOS6522State *s = MOS6522(obj); diff --git a/hw/misc/npcm7xx_mft.c b/hw/misc/npcm7xx_mft.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_mft.c +++ b/hw/misc/npcm7xx_mft.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_mft_enter_reset(Object *obj, ResetType type) npcm7xx_mft_reset(s); } -static void npcm7xx_mft_hold_reset(Object *obj) +static void npcm7xx_mft_hold_reset(Object *obj, ResetType type) { NPCM7xxMFTState *s = NPCM7XX_MFT(obj); diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_enter_reset(Object *obj, ResetType type) s->piir = 0x00000000; } -static void npcm7xx_pwm_hold_reset(Object *obj) +static void npcm7xx_pwm_hold_reset(Object *obj, ResetType type) { NPCM7xxPWMState *s = NPCM7XX_PWM(obj); int i; diff --git a/hw/misc/stm32l4x5_exti.c b/hw/misc/stm32l4x5_exti.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_exti.c +++ b/hw/misc/stm32l4x5_exti.c @@ -XXX,XX +XXX,XX @@ static unsigned configurable_mask(unsigned bank) return valid_mask(bank) & ~exti_romask[bank]; } -static void stm32l4x5_exti_reset_hold(Object *obj) +static void stm32l4x5_exti_reset_hold(Object *obj, ResetType type) { Stm32l4x5ExtiState *s = STM32L4X5_EXTI(obj); diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_rcc.c +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ static void clock_mux_reset_enter(Object *obj, ResetType type) set_clock_mux_init_info(s, s->id); } -static void clock_mux_reset_hold(Object *obj) +static void clock_mux_reset_hold(Object *obj, ResetType type) { RccClockMuxState *s = RCC_CLOCK_MUX(obj); clock_mux_update(s, true); } -static void clock_mux_reset_exit(Object *obj) +static void clock_mux_reset_exit(Object *obj, ResetType type) { RccClockMuxState *s = RCC_CLOCK_MUX(obj); clock_mux_update(s, false); @@ -XXX,XX +XXX,XX @@ static void pll_reset_enter(Object *obj, ResetType type) set_pll_init_info(s, s->id); } -static void pll_reset_hold(Object *obj) +static void pll_reset_hold(Object *obj, ResetType type) { RccPllState *s = RCC_PLL(obj); pll_update(s, true); } -static void pll_reset_exit(Object *obj) +static void pll_reset_exit(Object *obj, ResetType type) { RccPllState *s = RCC_PLL(obj); pll_update(s, false); @@ -XXX,XX +XXX,XX @@ static void rcc_update_csr(Stm32l4x5RccState *s) rcc_update_irq(s); } -static void stm32l4x5_rcc_reset_hold(Object *obj) +static void stm32l4x5_rcc_reset_hold(Object *obj, ResetType type) { Stm32l4x5RccState *s = STM32L4X5_RCC(obj); s->cr = 0x00000063; diff --git a/hw/misc/stm32l4x5_syscfg.c b/hw/misc/stm32l4x5_syscfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_syscfg.c +++ b/hw/misc/stm32l4x5_syscfg.c @@ -XXX,XX +XXX,XX @@ #define NUM_LINES_PER_EXTICR_REG 4 -static void stm32l4x5_syscfg_hold_reset(Object *obj) +static void stm32l4x5_syscfg_hold_reset(Object *obj, ResetType type) { Stm32l4x5SyscfgState *s = STM32L4X5_SYSCFG(obj); diff --git a/hw/misc/xlnx-versal-cframe-reg.c b/hw/misc/xlnx-versal-cframe-reg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-cframe-reg.c +++ b/hw/misc/xlnx-versal-cframe-reg.c @@ -XXX,XX +XXX,XX @@ static void cframe_reg_reset_enter(Object *obj, ResetType type) } } -static void cframe_reg_reset_hold(Object *obj) +static void cframe_reg_reset_hold(Object *obj, ResetType type) { XlnxVersalCFrameReg *s = XLNX_VERSAL_CFRAME_REG(obj); diff --git a/hw/misc/xlnx-versal-crl.c b/hw/misc/xlnx-versal-crl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-crl.c +++ b/hw/misc/xlnx-versal-crl.c @@ -XXX,XX +XXX,XX @@ static void crl_reset_enter(Object *obj, ResetType type) } } -static void crl_reset_hold(Object *obj) +static void crl_reset_hold(Object *obj, ResetType type) { XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); diff --git a/hw/misc/xlnx-versal-pmc-iou-slcr.c b/hw/misc/xlnx-versal-pmc-iou-slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-pmc-iou-slcr.c +++ b/hw/misc/xlnx-versal-pmc-iou-slcr.c @@ -XXX,XX +XXX,XX @@ static void xlnx_versal_pmc_iou_slcr_reset_init(Object *obj, ResetType type) } } -static void xlnx_versal_pmc_iou_slcr_reset_hold(Object *obj) +static void xlnx_versal_pmc_iou_slcr_reset_hold(Object *obj, ResetType type) { XlnxVersalPmcIouSlcr *s = XILINX_VERSAL_PMC_IOU_SLCR(obj); diff --git a/hw/misc/xlnx-versal-trng.c b/hw/misc/xlnx-versal-trng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-trng.c +++ b/hw/misc/xlnx-versal-trng.c @@ -XXX,XX +XXX,XX @@ static void trng_unrealize(DeviceState *dev) s->prng = NULL; } -static void trng_reset_hold(Object *obj) +static void trng_reset_hold(Object *obj, ResetType type) { trng_reset(XLNX_VERSAL_TRNG(obj)); } diff --git a/hw/misc/xlnx-versal-xramc.c b/hw/misc/xlnx-versal-xramc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-xramc.c +++ b/hw/misc/xlnx-versal-xramc.c @@ -XXX,XX +XXX,XX @@ static void xram_ctrl_reset_enter(Object *obj, ResetType type) ARRAY_FIELD_DP32(s->regs, XRAM_IMP, SIZE, s->cfg.encoded_size); } -static void xram_ctrl_reset_hold(Object *obj) +static void xram_ctrl_reset_hold(Object *obj, ResetType type) { XlnxXramCtrl *s = XLNX_XRAM_CTRL(obj); diff --git a/hw/misc/xlnx-zynqmp-apu-ctrl.c b/hw/misc/xlnx-zynqmp-apu-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-zynqmp-apu-ctrl.c +++ b/hw/misc/xlnx-zynqmp-apu-ctrl.c @@ -XXX,XX +XXX,XX @@ static void zynqmp_apu_reset_enter(Object *obj, ResetType type) s->cpu_in_wfi = 0; } -static void zynqmp_apu_reset_hold(Object *obj) +static void zynqmp_apu_reset_hold(Object *obj, ResetType type) { XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU_CTRL(obj); diff --git a/hw/misc/xlnx-zynqmp-crf.c b/hw/misc/xlnx-zynqmp-crf.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-zynqmp-crf.c +++ b/hw/misc/xlnx-zynqmp-crf.c @@ -XXX,XX +XXX,XX @@ static void crf_reset_enter(Object *obj, ResetType type) } } -static void crf_reset_hold(Object *obj) +static void crf_reset_hold(Object *obj, ResetType type) { XlnxZynqMPCRF *s = XLNX_ZYNQMP_CRF(obj); ir_update_irq(s); diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/zynq_slcr.c +++ b/hw/misc/zynq_slcr.c @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset_init(Object *obj, ResetType type) s->regs[R_DDRIOB + 12] = 0x00000021; } -static void zynq_slcr_reset_hold(Object *obj) +static void zynq_slcr_reset_hold(Object *obj, ResetType type) { ZynqSLCRState *s = ZYNQ_SLCR(obj); @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset_hold(Object *obj) zynq_slcr_propagate_clocks(s); } -static void zynq_slcr_reset_exit(Object *obj) +static void zynq_slcr_reset_exit(Object *obj, ResetType type) { ZynqSLCRState *s = ZYNQ_SLCR(obj); diff --git a/hw/net/can/xlnx-zynqmp-can.c b/hw/net/can/xlnx-zynqmp-can.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/can/xlnx-zynqmp-can.c +++ b/hw/net/can/xlnx-zynqmp-can.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_can_reset_init(Object *obj, ResetType type) ptimer_transaction_commit(s->can_timer); } -static void xlnx_zynqmp_can_reset_hold(Object *obj) +static void xlnx_zynqmp_can_reset_hold(Object *obj, ResetType type) { XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); unsigned int i; diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ static bool e1000_vet_init_need(void *opaque) return chkflag(VET); } -static void e1000_reset_hold(Object *obj) +static void e1000_reset_hold(Object *obj, ResetType type) { E1000State *d = E1000(obj); E1000BaseClass *edc = E1000_GET_CLASS(d); diff --git a/hw/net/e1000e.c b/hw/net/e1000e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e.c +++ b/hw/net/e1000e.c @@ -XXX,XX +XXX,XX @@ static void e1000e_pci_uninit(PCIDevice *pci_dev) msi_uninit(pci_dev); } -static void e1000e_qdev_reset_hold(Object *obj) +static void e1000e_qdev_reset_hold(Object *obj, ResetType type) { E1000EState *s = E1000E(obj); diff --git a/hw/net/igb.c b/hw/net/igb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/igb.c +++ b/hw/net/igb.c @@ -XXX,XX +XXX,XX @@ static void igb_pci_uninit(PCIDevice *pci_dev) msi_uninit(pci_dev); } -static void igb_qdev_reset_hold(Object *obj) +static void igb_qdev_reset_hold(Object *obj, ResetType type) { IGBState *s = IGB(obj); diff --git a/hw/net/igbvf.c b/hw/net/igbvf.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/igbvf.c +++ b/hw/net/igbvf.c @@ -XXX,XX +XXX,XX @@ static void igbvf_pci_realize(PCIDevice *dev, Error **errp) pcie_ari_init(dev, 0x150); } -static void igbvf_qdev_reset_hold(Object *obj) +static void igbvf_qdev_reset_hold(Object *obj, ResetType type) { PCIDevice *vf = PCI_DEVICE(obj); diff --git a/hw/nvram/xlnx-bbram.c b/hw/nvram/xlnx-bbram.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-bbram.c +++ b/hw/nvram/xlnx-bbram.c @@ -XXX,XX +XXX,XX @@ static RegisterAccessInfo bbram_ctrl_regs_info[] = { } }; -static void bbram_ctrl_reset_hold(Object *obj) +static void bbram_ctrl_reset_hold(Object *obj, ResetType type) { XlnxBBRam *s = XLNX_BBRAM(obj); unsigned int i; diff --git a/hw/nvram/xlnx-versal-efuse-ctrl.c b/hw/nvram/xlnx-versal-efuse-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-versal-efuse-ctrl.c +++ b/hw/nvram/xlnx-versal-efuse-ctrl.c @@ -XXX,XX +XXX,XX @@ static void efuse_ctrl_register_reset(RegisterInfo *reg) register_reset(reg); } -static void efuse_ctrl_reset_hold(Object *obj) +static void efuse_ctrl_reset_hold(Object *obj, ResetType type) { XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(obj); unsigned int i; diff --git a/hw/nvram/xlnx-zynqmp-efuse.c b/hw/nvram/xlnx-zynqmp-efuse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-zynqmp-efuse.c +++ b/hw/nvram/xlnx-zynqmp-efuse.c @@ -XXX,XX +XXX,XX @@ static void zynqmp_efuse_register_reset(RegisterInfo *reg) register_reset(reg); } -static void zynqmp_efuse_reset_hold(Object *obj) +static void zynqmp_efuse_reset_hold(Object *obj, ResetType type) { XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(obj); unsigned int i; diff --git a/hw/pci-bridge/cxl_root_port.c b/hw/pci-bridge/cxl_root_port.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-bridge/cxl_root_port.c +++ b/hw/pci-bridge/cxl_root_port.c @@ -XXX,XX +XXX,XX @@ static void cxl_rp_realize(DeviceState *dev, Error **errp) component_bar); } -static void cxl_rp_reset_hold(Object *obj) +static void cxl_rp_reset_hold(Object *obj, ResetType type) { PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(obj); CXLRootPort *crp = CXL_ROOT_PORT(obj); if (rpc->parent_phases.hold) { - rpc->parent_phases.hold(obj); + rpc->parent_phases.hold(obj, type); } latch_registers(crp); diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-bridge/pcie_root_port.c +++ b/hw/pci-bridge/pcie_root_port.c @@ -XXX,XX +XXX,XX @@ static void rp_write_config(PCIDevice *d, uint32_t address, pcie_aer_root_write_config(d, address, val, len, root_cmd); } -static void rp_reset_hold(Object *obj) +static void rp_reset_hold(Object *obj, ResetType type) { PCIDevice *d = PCI_DEVICE(obj); DeviceState *qdev = DEVICE(obj); diff --git a/hw/pci-host/bonito.c b/hw/pci-host/bonito.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/bonito.c +++ b/hw/pci-host/bonito.c @@ -XXX,XX +XXX,XX @@ static int pci_bonito_map_irq(PCIDevice *pci_dev, int irq_num) } } -static void bonito_reset_hold(Object *obj) +static void bonito_reset_hold(Object *obj, ResetType type) { PCIBonitoState *s = PCI_BONITO(obj); uint32_t val = 0; diff --git a/hw/pci-host/pnv_phb.c b/hw/pci-host/pnv_phb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/pnv_phb.c +++ b/hw/pci-host/pnv_phb.c @@ -XXX,XX +XXX,XX @@ static void pnv_phb_class_init(ObjectClass *klass, void *data) dc->user_creatable = true; } -static void pnv_phb_root_port_reset_hold(Object *obj) +static void pnv_phb_root_port_reset_hold(Object *obj, ResetType type) { PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(obj); PnvPHBRootPort *phb_rp = PNV_PHB_ROOT_PORT(obj); @@ -XXX,XX +XXX,XX @@ static void pnv_phb_root_port_reset_hold(Object *obj) uint8_t *conf = d->config; if (rpc->parent_phases.hold) { - rpc->parent_phases.hold(obj); + rpc->parent_phases.hold(obj, type); } if (phb_rp->version == 3) { diff --git a/hw/pci-host/pnv_phb3_msi.c b/hw/pci-host/pnv_phb3_msi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/pnv_phb3_msi.c +++ b/hw/pci-host/pnv_phb3_msi.c @@ -XXX,XX +XXX,XX @@ static void phb3_msi_resend(ICSState *ics) } } -static void phb3_msi_reset_hold(Object *obj) +static void phb3_msi_reset_hold(Object *obj, ResetType type) { Phb3MsiState *msi = PHB3_MSI(obj); ICSStateClass *icsc = ICS_GET_CLASS(obj); if (icsc->parent_phases.hold) { - icsc->parent_phases.hold(obj); + icsc->parent_phases.hold(obj, type); } memset(msi->rba, 0, sizeof(msi->rba)); diff --git a/hw/pci/pci.c b/hw/pci/pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci/pci.c +++ b/hw/pci/pci.c @@ -XXX,XX +XXX,XX @@ bool pci_available = true; static char *pcibus_get_dev_path(DeviceState *dev); static char *pcibus_get_fw_dev_path(DeviceState *dev); -static void pcibus_reset_hold(Object *obj); +static void pcibus_reset_hold(Object *obj, ResetType type); static bool pcie_has_upstream_port(PCIDevice *dev); static Property pci_props[] = { @@ -XXX,XX +XXX,XX @@ void pci_device_reset(PCIDevice *dev) * Called via bus_cold_reset on RST# assert, after the devices * have been reset device_cold_reset-ed already. */ -static void pcibus_reset_hold(Object *obj) +static void pcibus_reset_hold(Object *obj, ResetType type) { PCIBus *bus = PCI_BUS(obj); int i; diff --git a/hw/rtc/mc146818rtc.c b/hw/rtc/mc146818rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/mc146818rtc.c +++ b/hw/rtc/mc146818rtc.c @@ -XXX,XX +XXX,XX @@ static void rtc_reset_enter(Object *obj, ResetType type) } } -static void rtc_reset_hold(Object *obj) +static void rtc_reset_hold(Object *obj, ResetType type) { MC146818RtcState *s = MC146818_RTC(obj); diff --git a/hw/s390x/css-bridge.c b/hw/s390x/css-bridge.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/css-bridge.c +++ b/hw/s390x/css-bridge.c @@ -XXX,XX +XXX,XX @@ static void ccw_device_unplug(HotplugHandler *hotplug_dev, qdev_unrealize(dev); } -static void virtual_css_bus_reset_hold(Object *obj) +static void virtual_css_bus_reset_hold(Object *obj, ResetType type) { /* This should actually be modelled via the generic css */ css_reset(); diff --git a/hw/sensor/adm1266.c b/hw/sensor/adm1266.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1266.c +++ b/hw/sensor/adm1266.c @@ -XXX,XX +XXX,XX @@ static const uint8_t adm1266_ic_device_id[] = {0x03, 0x41, 0x12, 0x66}; static const uint8_t adm1266_ic_device_rev[] = {0x08, 0x01, 0x08, 0x07, 0x0, 0x0, 0x07, 0x41, 0x30}; -static void adm1266_exit_reset(Object *obj) +static void adm1266_exit_reset(Object *obj, ResetType type) { ADM1266State *s = ADM1266(obj); PMBusDevice *pmdev = PMBUS_DEVICE(obj); diff --git a/hw/sensor/adm1272.c b/hw/sensor/adm1272.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1272.c +++ b/hw/sensor/adm1272.c @@ -XXX,XX +XXX,XX @@ static uint32_t adm1272_direct_to_watts(uint16_t value) return pmbus_direct_mode2data(c, value); } -static void adm1272_exit_reset(Object *obj) +static void adm1272_exit_reset(Object *obj, ResetType type) { ADM1272State *s = ADM1272(obj); PMBusDevice *pmdev = PMBUS_DEVICE(obj); diff --git a/hw/sensor/isl_pmbus_vr.c b/hw/sensor/isl_pmbus_vr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/isl_pmbus_vr.c +++ b/hw/sensor/isl_pmbus_vr.c @@ -XXX,XX +XXX,XX @@ static void isl_pmbus_vr_set(Object *obj, Visitor *v, const char *name, pmbus_check_limits(pmdev); } -static void isl_pmbus_vr_exit_reset(Object *obj) +static void isl_pmbus_vr_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void isl_pmbus_vr_exit_reset(Object *obj) } /* The raa228000 uses different direct mode coefficients from most isl devices */ -static void raa228000_exit_reset(Object *obj) +static void raa228000_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); - isl_pmbus_vr_exit_reset(obj); + isl_pmbus_vr_exit_reset(obj, type); pmdev->pages[0].read_iout = 0; pmdev->pages[0].read_pout = 0; @@ -XXX,XX +XXX,XX @@ static void raa228000_exit_reset(Object *obj) pmdev->pages[0].read_temperature_3 = 0; } -static void isl69259_exit_reset(Object *obj) +static void isl69259_exit_reset(Object *obj, ResetType type) { ISLState *s = ISL69260(obj); static const uint8_t ic_device_id[] = {0x04, 0x00, 0x81, 0xD2, 0x49, 0x3c}; g_assert(sizeof(ic_device_id) <= sizeof(s->ic_device_id)); - isl_pmbus_vr_exit_reset(obj); + isl_pmbus_vr_exit_reset(obj, type); s->ic_device_id_len = sizeof(ic_device_id); memcpy(s->ic_device_id, ic_device_id, sizeof(ic_device_id)); diff --git a/hw/sensor/max31785.c b/hw/sensor/max31785.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/max31785.c +++ b/hw/sensor/max31785.c @@ -XXX,XX +XXX,XX @@ static int max31785_write_data(PMBusDevice *pmdev, const uint8_t *buf, return 0; } -static void max31785_exit_reset(Object *obj) +static void max31785_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); MAX31785State *s = MAX31785(obj); diff --git a/hw/sensor/max34451.c b/hw/sensor/max34451.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/max34451.c +++ b/hw/sensor/max34451.c @@ -XXX,XX +XXX,XX @@ static inline void *memset_word(void *s, uint16_t c, size_t n) return s; } -static void max34451_exit_reset(Object *obj) +static void max34451_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); MAX34451State *s = MAX34451(obj); diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/npcm7xx_fiu.c +++ b/hw/ssi/npcm7xx_fiu.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_enter_reset(Object *obj, ResetType type) s->regs[NPCM7XX_FIU_CFG] = 0x0000000b; } -static void npcm7xx_fiu_hold_reset(Object *obj) +static void npcm7xx_fiu_hold_reset(Object *obj, ResetType type) { NPCM7xxFIUState *s = NPCM7XX_FIU(obj); int i; diff --git a/hw/timer/etraxfs_timer.c b/hw/timer/etraxfs_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/etraxfs_timer.c +++ b/hw/timer/etraxfs_timer.c @@ -XXX,XX +XXX,XX @@ static void etraxfs_timer_reset_enter(Object *obj, ResetType type) t->rw_intr_mask = 0; } -static void etraxfs_timer_reset_hold(Object *obj) +static void etraxfs_timer_reset_hold(Object *obj, ResetType type) { ETRAXTimerState *t = ETRAX_TIMER(obj); diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_watchdog_timer_expired(void *opaque) } } -static void npcm7xx_timer_hold_reset(Object *obj) +static void npcm7xx_timer_hold_reset(Object *obj, ResetType type) { NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj); int i; diff --git a/hw/usb/hcd-dwc2.c b/hw/usb/hcd-dwc2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-dwc2.c +++ b/hw/usb/hcd-dwc2.c @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_enter(Object *obj, ResetType type) } } -static void dwc2_reset_hold(Object *obj) +static void dwc2_reset_hold(Object *obj, ResetType type) { DWC2Class *c = DWC2_USB_GET_CLASS(obj); DWC2State *s = DWC2_USB(obj); @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_hold(Object *obj) trace_usb_dwc2_reset_hold(); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } dwc2_update_irq(s); } -static void dwc2_reset_exit(Object *obj) +static void dwc2_reset_exit(Object *obj, ResetType type) { DWC2Class *c = DWC2_USB_GET_CLASS(obj); DWC2State *s = DWC2_USB(obj); @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_exit(Object *obj) trace_usb_dwc2_reset_exit(); if (c->parent_phases.exit) { - c->parent_phases.exit(obj); + c->parent_phases.exit(obj, type); } s->hprt0 = HPRT0_PWR; diff --git a/hw/usb/xlnx-versal-usb2-ctrl-regs.c b/hw/usb/xlnx-versal-usb2-ctrl-regs.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/xlnx-versal-usb2-ctrl-regs.c +++ b/hw/usb/xlnx-versal-usb2-ctrl-regs.c @@ -XXX,XX +XXX,XX @@ static void usb2_ctrl_regs_reset_init(Object *obj, ResetType type) } } -static void usb2_ctrl_regs_reset_hold(Object *obj) +static void usb2_ctrl_regs_reset_hold(Object *obj, ResetType type) { VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-pci.c +++ b/hw/virtio/virtio-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_pci_reset(DeviceState *qdev) } } -static void virtio_pci_bus_reset_hold(Object *obj) +static void virtio_pci_bus_reset_hold(Object *obj, ResetType type) { PCIDevice *dev = PCI_DEVICE(obj); DeviceState *qdev = DEVICE(obj); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cp_reg_check_reset(gpointer key, gpointer value, gpointer opaque) assert(oldvalue == newvalue); } -static void arm_cpu_reset_hold(Object *obj) +static void arm_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) CPUARMState *env = &cpu->env; if (acc->parent_phases.hold) { - acc->parent_phases.hold(obj); + acc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUARMState, end_reset_fields)); diff --git a/target/avr/cpu.c b/target/avr/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/avr/cpu.c +++ b/target/avr/cpu.c @@ -XXX,XX +XXX,XX @@ static void avr_restore_state_to_opc(CPUState *cs, cpu_env(cs)->pc_w = data[0]; } -static void avr_cpu_reset_hold(Object *obj) +static void avr_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); AVRCPU *cpu = AVR_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void avr_cpu_reset_hold(Object *obj) CPUAVRState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } env->pc_w = 0; diff --git a/target/cris/cpu.c b/target/cris/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/cris/cpu.c +++ b/target/cris/cpu.c @@ -XXX,XX +XXX,XX @@ static int cris_cpu_mmu_index(CPUState *cs, bool ifetch) return !!(cpu_env(cs)->pregs[PR_CCS] & U_FLAG); } -static void cris_cpu_reset_hold(Object *obj) +static void cris_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); CRISCPUClass *ccc = CRIS_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void cris_cpu_reset_hold(Object *obj) uint32_t vr; if (ccc->parent_phases.hold) { - ccc->parent_phases.hold(obj); + ccc->parent_phases.hold(obj, type); } vr = env->pregs[PR_VR]; diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_restore_state_to_opc(CPUState *cs, cpu_env(cs)->gpr[HEX_REG_PC] = data[0]; } -static void hexagon_cpu_reset_hold(Object *obj) +static void hexagon_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); HexagonCPUClass *mcc = HEXAGON_CPU_GET_CLASS(obj); CPUHexagonState *env = cpu_env(cs); if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } set_default_nan_mode(1, &env->fp_status); diff --git a/target/i386/cpu.c b/target/i386/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/cpu.c +++ b/target/i386/cpu.c @@ -XXX,XX +XXX,XX @@ static void x86_cpu_set_sgxlepubkeyhash(CPUX86State *env) #endif } -static void x86_cpu_reset_hold(Object *obj) +static void x86_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); X86CPU *cpu = X86_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void x86_cpu_reset_hold(Object *obj) int i; if (xcc->parent_phases.hold) { - xcc->parent_phases.hold(obj); + xcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUX86State, end_reset_fields)); diff --git a/target/loongarch/cpu.c b/target/loongarch/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/cpu.c +++ b/target/loongarch/cpu.c @@ -XXX,XX +XXX,XX @@ static void loongarch_max_initfn(Object *obj) loongarch_la464_initfn(obj); } -static void loongarch_cpu_reset_hold(Object *obj) +static void loongarch_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); LoongArchCPUClass *lacc = LOONGARCH_CPU_GET_CLASS(obj); CPULoongArchState *env = cpu_env(cs); if (lacc->parent_phases.hold) { - lacc->parent_phases.hold(obj); + lacc->parent_phases.hold(obj, type); } env->fcsr0_mask = FCSR0_M1 | FCSR0_M2 | FCSR0_M3; diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_unset_feature(CPUM68KState *env, int feature) env->features &= ~BIT_ULL(feature); } -static void m68k_cpu_reset_hold(Object *obj) +static void m68k_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj) int i; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUM68KState, end_reset_fields)); diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void microblaze_cpu_set_irq(void *opaque, int irq, int level) } #endif -static void mb_cpu_reset_hold(Object *obj) +static void mb_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj) CPUMBState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUMBState, end_reset_fields)); diff --git a/target/mips/cpu.c b/target/mips/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/cpu.c +++ b/target/mips/cpu.c @@ -XXX,XX +XXX,XX @@ static int mips_cpu_mmu_index(CPUState *cs, bool ifunc) #include "cpu-defs.c.inc" -static void mips_cpu_reset_hold(Object *obj) +static void mips_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); MIPSCPU *cpu = MIPS_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void mips_cpu_reset_hold(Object *obj) CPUMIPSState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUMIPSState, end_reset_fields)); diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_disas_set_info(CPUState *cpu, disassemble_info *info) info->print_insn = print_insn_or1k; } -static void openrisc_cpu_reset_hold(Object *obj) +static void openrisc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); OpenRISCCPU *cpu = OPENRISC_CPU(cs); OpenRISCCPUClass *occ = OPENRISC_CPU_GET_CLASS(obj); if (occ->parent_phases.hold) { - occ->parent_phases.hold(obj); + occ->parent_phases.hold(obj, type); } memset(&cpu->env, 0, offsetof(CPUOpenRISCState, end_reset_fields)); diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static int ppc_cpu_mmu_index(CPUState *cs, bool ifetch) return ppc_env_mmu_index(cpu_env(cs), ifetch); } -static void ppc_cpu_reset_hold(Object *obj) +static void ppc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); PowerPCCPU *cpu = POWERPC_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj) int i; if (pcc->parent_phases.hold) { - pcc->parent_phases.hold(obj); + pcc->parent_phases.hold(obj, type); } msr = (target_ulong)0; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static int riscv_cpu_mmu_index(CPUState *cs, bool ifetch) return riscv_env_mmu_index(cpu_env(cs), ifetch); } -static void riscv_cpu_reset_hold(Object *obj) +static void riscv_cpu_reset_hold(Object *obj, ResetType type) { #ifndef CONFIG_USER_ONLY uint8_t iprio; @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj) CPURISCVState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } #ifndef CONFIG_USER_ONLY env->misa_mxl = mcc->misa_mxl_max; diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static int riscv_cpu_mmu_index(CPUState *cs, bool ifunc) return 0; } -static void rx_cpu_reset_hold(Object *obj) +static void rx_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); RXCPUClass *rcc = RX_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj) uint32_t *resetvec; if (rcc->parent_phases.hold) { - rcc->parent_phases.hold(obj); + rcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPURXState, end_reset_fields)); diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static int sh4_cpu_mmu_index(CPUState *cs, bool ifetch) } } -static void superh_cpu_reset_hold(Object *obj) +static void superh_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); SuperHCPUClass *scc = SUPERH_CPU_GET_CLASS(obj); CPUSH4State *env = cpu_env(cs); if (scc->parent_phases.hold) { - scc->parent_phases.hold(obj); + scc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUSH4State, end_reset_fields)); diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ //#define DEBUG_FEATURES -static void sparc_cpu_reset_hold(Object *obj) +static void sparc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); SPARCCPUClass *scc = SPARC_CPU_GET_CLASS(obj); CPUSPARCState *env = cpu_env(cs); if (scc->parent_phases.hold) { - scc->parent_phases.hold(obj); + scc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUSPARCState, end_reset_fields)); diff --git a/target/tricore/cpu.c b/target/tricore/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/cpu.c +++ b/target/tricore/cpu.c @@ -XXX,XX +XXX,XX @@ static void tricore_restore_state_to_opc(CPUState *cs, cpu_env(cs)->PC = data[0]; } -static void tricore_cpu_reset_hold(Object *obj) +static void tricore_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); TriCoreCPUClass *tcc = TRICORE_CPU_GET_CLASS(obj); if (tcc->parent_phases.hold) { - tcc->parent_phases.hold(obj); + tcc->parent_phases.hold(obj, type); } cpu_state_reset(cpu_env(cs)); diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ bool xtensa_abi_call0(void) } #endif -static void xtensa_cpu_reset_hold(Object *obj) +static void xtensa_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); XtensaCPUClass *xcc = XTENSA_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj) XTENSA_OPTION_DFP_COPROCESSOR); if (xcc->parent_phases.hold) { - xcc->parent_phases.hold(obj); + xcc->parent_phases.hold(obj, type); } env->pc = env->config->exception_vector[EXC_RESET0 + env->static_vectors]; -- 2.34.1 Update the reset documentation's example code to match the new API for the hold and exit phase method APIs where they take a ResetType argument. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-6-peter.maydell@linaro.org --- docs/devel/reset.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/reset.rst +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ in reset. mydev->var = 0; } - static void mydev_reset_hold(Object *obj) + static void mydev_reset_hold(Object *obj, ResetType type) { MyDevClass *myclass = MYDEV_GET_CLASS(obj); MyDevState *mydev = MYDEV(obj); /* call parent class hold phase */ if (myclass->parent_phases.hold) { - myclass->parent_phases.hold(obj); + myclass->parent_phases.hold(obj, type); } /* set an IO */ qemu_set_irq(mydev->irq, 1); } - static void mydev_reset_exit(Object *obj) + static void mydev_reset_exit(Object *obj, ResetType type) { MyDevClass *myclass = MYDEV_GET_CLASS(obj); MyDevState *mydev = MYDEV(obj); /* call parent class exit phase */ if (myclass->parent_phases.exit) { - myclass->parent_phases.exit(obj); + myclass->parent_phases.exit(obj, type); } /* clear an IO */ qemu_set_irq(mydev->irq, 0); -- 2.34.1 Some devices and machines need to handle the reset before a vmsave snapshot is loaded differently -- the main user is the handling of RNG seed information, which does not want to put a new RNG seed into a ROM blob when we are doing a snapshot load. Currently this kind of reset handling is supported only for: * TYPE_MACHINE reset methods, which take a ShutdownCause argument * reset functions registered with qemu_register_reset_nosnapshotload To allow a three-phase-reset device to also distinguish "snapshot load" reset from the normal kind, add a new ResetType RESET_TYPE_SNAPSHOT_LOAD. All our existing reset methods ignore the reset type, so we don't need to update any device code. Add the enum type, and make qemu_devices_reset() use the right reset type for the ShutdownCause it is passed. This allows us to get rid of the device_reset_reason global we were using to implement qemu_register_reset_nosnapshotload(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-7-peter.maydell@linaro.org --- docs/devel/reset.rst | 17 ++++++++++++++--- include/hw/resettable.h | 1 + hw/core/reset.c | 15 ++++----------- hw/core/resettable.c | 4 ---- 4 files changed, 19 insertions(+), 18 deletions(-) diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/reset.rst +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ instantly reset an object, without keeping it in reset state, just call ``resettable_reset()``. These functions take two parameters: a pointer to the object to reset and a reset type. -Several types of reset will be supported. For now only cold reset is defined; -others may be added later. The Resettable interface handles reset types with an -enum: +The Resettable interface handles reset types with an enum ``ResetType``: ``RESET_TYPE_COLD`` Cold reset is supported by every resettable object. In QEMU, it means we reset @@ -XXX,XX +XXX,XX @@ enum: from what is a real hardware cold reset. It differs from other resets (like warm or bus resets) which may keep certain parts untouched. +``RESET_TYPE_SNAPSHOT_LOAD`` + This is called for a reset which is being done to put the system into a + clean state prior to loading a snapshot. (This corresponds to a reset + with ``SHUTDOWN_CAUSE_SNAPSHOT_LOAD``.) Almost all devices should treat + this the same as ``RESET_TYPE_COLD``. The main exception is devices which + have some non-deterministic state they want to reinitialize to a different + value on each cold reset, such as RNG seed information, and which they + must not reinitialize on a snapshot-load reset. + +Devices which implement reset methods must treat any unknown ``ResetType`` +as equivalent to ``RESET_TYPE_COLD``; this will reduce the amount of +existing code we need to change if we add more types in future. + Calling ``resettable_reset()`` is equivalent to calling ``resettable_assert_reset()`` then ``resettable_release_reset()``. It is possible to interleave multiple calls to these three functions. There may diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ typedef struct ResettableState ResettableState; */ typedef enum ResetType { RESET_TYPE_COLD, + RESET_TYPE_SNAPSHOT_LOAD, } ResetType; /* diff --git a/hw/core/reset.c b/hw/core/reset.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/reset.c +++ b/hw/core/reset.c @@ -XXX,XX +XXX,XX @@ static ResettableContainer *get_root_reset_container(void) return root_reset_container; } -/* - * Reason why the currently in-progress qemu_devices_reset() was called. - * If we made at least SHUTDOWN_CAUSE_SNAPSHOT_LOAD have a corresponding - * ResetType we could perhaps avoid the need for this global. - */ -static ShutdownCause device_reset_reason; - /* * This is an Object which implements Resettable simply to call the * callback function in the hold phase. @@ -XXX,XX +XXX,XX @@ static void legacy_reset_hold(Object *obj, ResetType type) { LegacyReset *lr = LEGACY_RESET(obj); - if (device_reset_reason == SHUTDOWN_CAUSE_SNAPSHOT_LOAD && - lr->skip_on_snapshot_load) { + if (type == RESET_TYPE_SNAPSHOT_LOAD && lr->skip_on_snapshot_load) { return; } lr->func(lr->opaque); @@ -XXX,XX +XXX,XX @@ void qemu_unregister_resettable(Object *obj) void qemu_devices_reset(ShutdownCause reason) { - device_reset_reason = reason; + ResetType type = (reason == SHUTDOWN_CAUSE_SNAPSHOT_LOAD) ? + RESET_TYPE_SNAPSHOT_LOAD : RESET_TYPE_COLD; /* Reset the simulation */ - resettable_reset(OBJECT(get_root_reset_container()), RESET_TYPE_COLD); + resettable_reset(OBJECT(get_root_reset_container()), type); } diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ void resettable_reset(Object *obj, ResetType type) void resettable_assert_reset(Object *obj, ResetType type) { - /* TODO: change this assert when adding support for other reset types */ - assert(type == RESET_TYPE_COLD); trace_resettable_reset_assert_begin(obj, type); assert(!enter_phase_in_progress); @@ -XXX,XX +XXX,XX @@ void resettable_assert_reset(Object *obj, ResetType type) void resettable_release_reset(Object *obj, ResetType type) { - /* TODO: change this assert when adding support for other reset types */ - assert(type == RESET_TYPE_COLD); trace_resettable_reset_release_begin(obj, type); assert(!enter_phase_in_progress); -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add the basic infrastructure (register read/write, type...) to implement the STM32L4x5 USART. Also create different types for the USART, UART and LPUART of the STM32L4x5 to deduplicate code and enable the implementation of different behaviors depending on the type. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-2-arnaud.minier@telecom-paris.fr [PMM: update to new reset hold method signature; fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + include/hw/char/stm32l4x5_usart.h | 66 +++++ hw/char/stm32l4x5_usart.c | 396 ++++++++++++++++++++++++++++++ hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 4 + 6 files changed, 471 insertions(+) create mode 100644 include/hw/char/stm32l4x5_usart.h create mode 100644 hw/char/stm32l4x5_usart.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Inès Varhol <ines.varhol@telecom-paris.fr> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/stm32l4x5_soc.c +F: hw/char/stm32l4x5_usart.c F: hw/misc/stm32l4x5_exti.c F: hw/misc/stm32l4x5_syscfg.c F: hw/misc/stm32l4x5_rcc.c diff --git a/include/hw/char/stm32l4x5_usart.h b/include/hw/char/stm32l4x5_usart.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/char/stm32l4x5_usart.h @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart + * by Alistair Francis. + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + */ + +#ifndef HW_STM32L4X5_USART_H +#define HW_STM32L4X5_USART_H + +#include "hw/sysbus.h" +#include "chardev/char-fe.h" +#include "qom/object.h" + +#define TYPE_STM32L4X5_USART_BASE "stm32l4x5-usart-base" +#define TYPE_STM32L4X5_USART "stm32l4x5-usart" +#define TYPE_STM32L4X5_UART "stm32l4x5-uart" +#define TYPE_STM32L4X5_LPUART "stm32l4x5-lpuart" +OBJECT_DECLARE_TYPE(Stm32l4x5UsartBaseState, Stm32l4x5UsartBaseClass, + STM32L4X5_USART_BASE) + +typedef enum { + STM32L4x5_USART, + STM32L4x5_UART, + STM32L4x5_LPUART, +} Stm32l4x5UsartType; + +struct Stm32l4x5UsartBaseState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + uint32_t cr1; + uint32_t cr2; + uint32_t cr3; + uint32_t brr; + uint32_t gtpr; + uint32_t rtor; + /* rqr is write-only */ + uint32_t isr; + /* icr is a clear register */ + uint32_t rdr; + uint32_t tdr; + + Clock *clk; + CharBackend chr; + qemu_irq irq; +}; + +struct Stm32l4x5UsartBaseClass { + SysBusDeviceClass parent_class; + + Stm32l4x5UsartType type; +}; + +#endif /* HW_STM32L4X5_USART_H */ diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart + * by Alistair Francis. + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qapi/error.h" +#include "chardev/char-fe.h" +#include "chardev/char-serial.h" +#include "migration/vmstate.h" +#include "hw/char/stm32l4x5_usart.h" +#include "hw/clock.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-properties-system.h" +#include "hw/registerfields.h" +#include "trace.h" + + +REG32(CR1, 0x00) + FIELD(CR1, M1, 28, 1) /* Word length (part 2, see M0) */ + FIELD(CR1, EOBIE, 27, 1) /* End of Block interrupt enable */ + FIELD(CR1, RTOIE, 26, 1) /* Receiver timeout interrupt enable */ + FIELD(CR1, DEAT, 21, 5) /* Driver Enable assertion time */ + FIELD(CR1, DEDT, 16, 5) /* Driver Enable de-assertion time */ + FIELD(CR1, OVER8, 15, 1) /* Oversampling mode */ + FIELD(CR1, CMIE, 14, 1) /* Character match interrupt enable */ + FIELD(CR1, MME, 13, 1) /* Mute mode enable */ + FIELD(CR1, M0, 12, 1) /* Word length (part 1, see M1) */ + FIELD(CR1, WAKE, 11, 1) /* Receiver wakeup method */ + FIELD(CR1, PCE, 10, 1) /* Parity control enable */ + FIELD(CR1, PS, 9, 1) /* Parity selection */ + FIELD(CR1, PEIE, 8, 1) /* PE interrupt enable */ + FIELD(CR1, TXEIE, 7, 1) /* TXE interrupt enable */ + FIELD(CR1, TCIE, 6, 1) /* Transmission complete interrupt enable */ + FIELD(CR1, RXNEIE, 5, 1) /* RXNE interrupt enable */ + FIELD(CR1, IDLEIE, 4, 1) /* IDLE interrupt enable */ + FIELD(CR1, TE, 3, 1) /* Transmitter enable */ + FIELD(CR1, RE, 2, 1) /* Receiver enable */ + FIELD(CR1, UESM, 1, 1) /* USART enable in Stop mode */ + FIELD(CR1, UE, 0, 1) /* USART enable */ +REG32(CR2, 0x04) + FIELD(CR2, ADD_1, 28, 4) /* ADD[7:4] */ + FIELD(CR2, ADD_0, 24, 1) /* ADD[3:0] */ + FIELD(CR2, RTOEN, 23, 1) /* Receiver timeout enable */ + FIELD(CR2, ABRMOD, 21, 2) /* Auto baud rate mode */ + FIELD(CR2, ABREN, 20, 1) /* Auto baud rate enable */ + FIELD(CR2, MSBFIRST, 19, 1) /* Most significant bit first */ + FIELD(CR2, DATAINV, 18, 1) /* Binary data inversion */ + FIELD(CR2, TXINV, 17, 1) /* TX pin active level inversion */ + FIELD(CR2, RXINV, 16, 1) /* RX pin active level inversion */ + FIELD(CR2, SWAP, 15, 1) /* Swap RX/TX pins */ + FIELD(CR2, LINEN, 14, 1) /* LIN mode enable */ + FIELD(CR2, STOP, 12, 2) /* STOP bits */ + FIELD(CR2, CLKEN, 11, 1) /* Clock enable */ + FIELD(CR2, CPOL, 10, 1) /* Clock polarity */ + FIELD(CR2, CPHA, 9, 1) /* Clock phase */ + FIELD(CR2, LBCL, 8, 1) /* Last bit clock pulse */ + FIELD(CR2, LBDIE, 6, 1) /* LIN break detection interrupt enable */ + FIELD(CR2, LBDL, 5, 1) /* LIN break detection length */ + FIELD(CR2, ADDM7, 4, 1) /* 7-bit / 4-bit Address Detection */ + +REG32(CR3, 0x08) + /* TCBGTIE only on STM32L496xx/4A6xx devices */ + FIELD(CR3, UCESM, 23, 1) /* USART Clock Enable in Stop Mode */ + FIELD(CR3, WUFIE, 22, 1) /* Wakeup from Stop mode interrupt enable */ + FIELD(CR3, WUS, 20, 2) /* Wakeup from Stop mode interrupt flag selection */ + FIELD(CR3, SCARCNT, 17, 3) /* Smartcard auto-retry count */ + FIELD(CR3, DEP, 15, 1) /* Driver enable polarity selection */ + FIELD(CR3, DEM, 14, 1) /* Driver enable mode */ + FIELD(CR3, DDRE, 13, 1) /* DMA Disable on Reception Error */ + FIELD(CR3, OVRDIS, 12, 1) /* Overrun Disable */ + FIELD(CR3, ONEBIT, 11, 1) /* One sample bit method enable */ + FIELD(CR3, CTSIE, 10, 1) /* CTS interrupt enable */ + FIELD(CR3, CTSE, 9, 1) /* CTS enable */ + FIELD(CR3, RTSE, 8, 1) /* RTS enable */ + FIELD(CR3, DMAT, 7, 1) /* DMA enable transmitter */ + FIELD(CR3, DMAR, 6, 1) /* DMA enable receiver */ + FIELD(CR3, SCEN, 5, 1) /* Smartcard mode enable */ + FIELD(CR3, NACK, 4, 1) /* Smartcard NACK enable */ + FIELD(CR3, HDSEL, 3, 1) /* Half-duplex selection */ + FIELD(CR3, IRLP, 2, 1) /* IrDA low-power */ + FIELD(CR3, IREN, 1, 1) /* IrDA mode enable */ + FIELD(CR3, EIE, 0, 1) /* Error interrupt enable */ +REG32(BRR, 0x0C) + FIELD(BRR, BRR, 0, 16) +REG32(GTPR, 0x10) + FIELD(GTPR, GT, 8, 8) /* Guard time value */ + FIELD(GTPR, PSC, 0, 8) /* Prescaler value */ +REG32(RTOR, 0x14) + FIELD(RTOR, BLEN, 24, 8) /* Block Length */ + FIELD(RTOR, RTO, 0, 24) /* Receiver timeout value */ +REG32(RQR, 0x18) + FIELD(RQR, TXFRQ, 4, 1) /* Transmit data flush request */ + FIELD(RQR, RXFRQ, 3, 1) /* Receive data flush request */ + FIELD(RQR, MMRQ, 2, 1) /* Mute mode request */ + FIELD(RQR, SBKRQ, 1, 1) /* Send break request */ + FIELD(RQR, ABBRRQ, 0, 1) /* Auto baud rate request */ +REG32(ISR, 0x1C) + /* TCBGT only for STM32L475xx/476xx/486xx devices */ + FIELD(ISR, REACK, 22, 1) /* Receive enable acknowledge flag */ + FIELD(ISR, TEACK, 21, 1) /* Transmit enable acknowledge flag */ + FIELD(ISR, WUF, 20, 1) /* Wakeup from Stop mode flag */ + FIELD(ISR, RWU, 19, 1) /* Receiver wakeup from Mute mode */ + FIELD(ISR, SBKF, 18, 1) /* Send break flag */ + FIELD(ISR, CMF, 17, 1) /* Character match flag */ + FIELD(ISR, BUSY, 16, 1) /* Busy flag */ + FIELD(ISR, ABRF, 15, 1) /* Auto Baud rate flag */ + FIELD(ISR, ABRE, 14, 1) /* Auto Baud rate error */ + FIELD(ISR, EOBF, 12, 1) /* End of block flag */ + FIELD(ISR, RTOF, 11, 1) /* Receiver timeout */ + FIELD(ISR, CTS, 10, 1) /* CTS flag */ + FIELD(ISR, CTSIF, 9, 1) /* CTS interrupt flag */ + FIELD(ISR, LBDF, 8, 1) /* LIN break detection flag */ + FIELD(ISR, TXE, 7, 1) /* Transmit data register empty */ + FIELD(ISR, TC, 6, 1) /* Transmission complete */ + FIELD(ISR, RXNE, 5, 1) /* Read data register not empty */ + FIELD(ISR, IDLE, 4, 1) /* Idle line detected */ + FIELD(ISR, ORE, 3, 1) /* Overrun error */ + FIELD(ISR, NF, 2, 1) /* START bit Noise detection flag */ + FIELD(ISR, FE, 1, 1) /* Framing Error */ + FIELD(ISR, PE, 0, 1) /* Parity Error */ +REG32(ICR, 0x20) + FIELD(ICR, WUCF, 20, 1) /* Wakeup from Stop mode clear flag */ + FIELD(ICR, CMCF, 17, 1) /* Character match clear flag */ + FIELD(ICR, EOBCF, 12, 1) /* End of block clear flag */ + FIELD(ICR, RTOCF, 11, 1) /* Receiver timeout clear flag */ + FIELD(ICR, CTSCF, 9, 1) /* CTS clear flag */ + FIELD(ICR, LBDCF, 8, 1) /* LIN break detection clear flag */ + /* TCBGTCF only on STM32L496xx/4A6xx devices */ + FIELD(ICR, TCCF, 6, 1) /* Transmission complete clear flag */ + FIELD(ICR, IDLECF, 4, 1) /* Idle line detected clear flag */ + FIELD(ICR, ORECF, 3, 1) /* Overrun error clear flag */ + FIELD(ICR, NCF, 2, 1) /* Noise detected clear flag */ + FIELD(ICR, FECF, 1, 1) /* Framing error clear flag */ + FIELD(ICR, PECF, 0, 1) /* Parity error clear flag */ +REG32(RDR, 0x24) + FIELD(RDR, RDR, 0, 9) +REG32(TDR, 0x28) + FIELD(TDR, TDR, 0, 9) + +static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); + + s->cr1 = 0x00000000; + s->cr2 = 0x00000000; + s->cr3 = 0x00000000; + s->brr = 0x00000000; + s->gtpr = 0x00000000; + s->rtor = 0x00000000; + s->isr = 0x020000C0; + s->rdr = 0x00000000; + s->tdr = 0x00000000; +} + +static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + uint64_t retvalue = 0; + + switch (addr) { + case A_CR1: + retvalue = s->cr1; + break; + case A_CR2: + retvalue = s->cr2; + break; + case A_CR3: + retvalue = s->cr3; + break; + case A_BRR: + retvalue = FIELD_EX32(s->brr, BRR, BRR); + break; + case A_GTPR: + retvalue = s->gtpr; + break; + case A_RTOR: + retvalue = s->rtor; + break; + case A_RQR: + /* RQR is a write only register */ + retvalue = 0x00000000; + break; + case A_ISR: + retvalue = s->isr; + break; + case A_ICR: + /* ICR is a clear register */ + retvalue = 0x00000000; + break; + case A_RDR: + retvalue = FIELD_EX32(s->rdr, RDR, RDR); + /* Reset RXNE flag */ + s->isr &= ~R_ISR_RXNE_MASK; + break; + case A_TDR: + retvalue = FIELD_EX32(s->tdr, TDR, TDR); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + break; + } + + trace_stm32l4x5_usart_read(addr, retvalue); + + return retvalue; +} + +static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + const uint32_t value = val64; + + trace_stm32l4x5_usart_write(addr, value); + + switch (addr) { + case A_CR1: + s->cr1 = value; + return; + case A_CR2: + s->cr2 = value; + return; + case A_CR3: + s->cr3 = value; + return; + case A_BRR: + s->brr = value; + return; + case A_GTPR: + s->gtpr = value; + return; + case A_RTOR: + s->rtor = value; + return; + case A_RQR: + return; + case A_ISR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: ISR is read only !\n", __func__); + return; + case A_ICR: + /* Clear the status flags */ + s->isr &= ~value; + return; + case A_RDR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: RDR is read only !\n", __func__); + return; + case A_TDR: + s->tdr = value; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + } +} + +static const MemoryRegionOps stm32l4x5_usart_base_ops = { + .read = stm32l4x5_usart_base_read, + .write = stm32l4x5_usart_base_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .max_access_size = 4, + .min_access_size = 4, + .unaligned = false + }, + .impl = { + .max_access_size = 4, + .min_access_size = 4, + .unaligned = false + }, +}; + +static Property stm32l4x5_usart_base_properties[] = { + DEFINE_PROP_CHR("chardev", Stm32l4x5UsartBaseState, chr), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32l4x5_usart_base_init(Object *obj) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); + + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_usart_base_ops, s, + TYPE_STM32L4X5_USART_BASE, 0x400); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); +} + +static const VMStateDescription vmstate_stm32l4x5_usart_base = { + .name = TYPE_STM32L4X5_USART_BASE, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(cr1, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(cr2, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(cr3, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(brr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(gtpr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(rtor, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(isr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(rdr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(tdr, Stm32l4x5UsartBaseState), + VMSTATE_CLOCK(clk, Stm32l4x5UsartBaseState), + VMSTATE_END_OF_LIST() + } +}; + + +static void stm32l4x5_usart_base_realize(DeviceState *dev, Error **errp) +{ + ERRP_GUARD(); + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(dev); + if (!clock_has_source(s->clk)) { + error_setg(errp, "USART clock must be wired up by SoC code"); + return; + } +} + +static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = stm32l4x5_usart_base_reset_hold; + device_class_set_props(dc, stm32l4x5_usart_base_properties); + dc->realize = stm32l4x5_usart_base_realize; + dc->vmsd = &vmstate_stm32l4x5_usart_base; +} + +static void stm32l4x5_usart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_USART; +} + +static void stm32l4x5_uart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_UART; +} + +static void stm32l4x5_lpuart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_LPUART; +} + +static const TypeInfo stm32l4x5_usart_types[] = { + { + .name = TYPE_STM32L4X5_USART_BASE, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Stm32l4x5UsartBaseState), + .instance_init = stm32l4x5_usart_base_init, + .class_init = stm32l4x5_usart_base_class_init, + .abstract = true, + }, { + .name = TYPE_STM32L4X5_USART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_usart_class_init, + }, { + .name = TYPE_STM32L4X5_UART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_uart_class_init, + }, { + .name = TYPE_STM32L4X5_LPUART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_lpuart_class_init, + } +}; + +DEFINE_TYPES(stm32l4x5_usart_types) diff --git a/hw/char/Kconfig b/hw/char/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/char/Kconfig +++ b/hw/char/Kconfig @@ -XXX,XX +XXX,XX @@ config VIRTIO_SERIAL config STM32F2XX_USART bool +config STM32L4X5_USART + bool + config CMSDK_APB_UART bool diff --git a/hw/char/meson.build b/hw/char/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/char/meson.build +++ b/hw/char/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c')) system_ss.add(when: 'CONFIG_SIFIVE_UART', if_true: files('sifive_uart.c')) system_ss.add(when: 'CONFIG_SH_SCI', if_true: files('sh_serial.c')) system_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c')) +system_ss.add(when: 'CONFIG_STM32L4X5_USART', if_true: files('stm32l4x5_usart.c')) system_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c')) system_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c')) system_ss.add(when: 'CONFIG_GOLDFISH_TTY', if_true: files('goldfish_tty.c')) diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ cadence_uart_baudrate(unsigned baudrate) "baudrate %u" sh_serial_read(char *id, unsigned size, uint64_t offs, uint64_t val) " %s size %d offs 0x%02" PRIx64 " -> 0x%02" PRIx64 sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size %d offs 0x%02" PRIx64 " <- 0x%02" PRIx64 +# stm32l4x5_usart.c +stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 "> -> 0x%" PRIx32 "" +stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 "> <- 0x%" PRIx32 "" + # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" xen_console_disconnect(unsigned int idx) "idx %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Implement the ability to read and write characters to the usart using the serial port. The character transmission is based on the cmsdk-apb-uart implementation. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-3-arnaud.minier@telecom-paris.fr [PMM: fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/stm32l4x5_usart.h | 1 + hw/char/stm32l4x5_usart.c | 143 ++++++++++++++++++++++++++++++ hw/char/trace-events | 7 ++ 3 files changed, 151 insertions(+) diff --git a/include/hw/char/stm32l4x5_usart.h b/include/hw/char/stm32l4x5_usart.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/stm32l4x5_usart.h +++ b/include/hw/char/stm32l4x5_usart.h @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5UsartBaseState { Clock *clk; CharBackend chr; qemu_irq irq; + guint watch_tag; }; struct Stm32l4x5UsartBaseClass { diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32l4x5_usart.c +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ REG32(RDR, 0x24) REG32(TDR, 0x28) FIELD(TDR, TDR, 0, 9) +static void stm32l4x5_update_irq(Stm32l4x5UsartBaseState *s) +{ + if (((s->isr & R_ISR_WUF_MASK) && (s->cr3 & R_CR3_WUFIE_MASK)) || + ((s->isr & R_ISR_CMF_MASK) && (s->cr1 & R_CR1_CMIE_MASK)) || + ((s->isr & R_ISR_ABRF_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK)) || + ((s->isr & R_ISR_EOBF_MASK) && (s->cr1 & R_CR1_EOBIE_MASK)) || + ((s->isr & R_ISR_RTOF_MASK) && (s->cr1 & R_CR1_RTOIE_MASK)) || + ((s->isr & R_ISR_CTSIF_MASK) && (s->cr3 & R_CR3_CTSIE_MASK)) || + ((s->isr & R_ISR_LBDF_MASK) && (s->cr2 & R_CR2_LBDIE_MASK)) || + ((s->isr & R_ISR_TXE_MASK) && (s->cr1 & R_CR1_TXEIE_MASK)) || + ((s->isr & R_ISR_TC_MASK) && (s->cr1 & R_CR1_TCIE_MASK)) || + ((s->isr & R_ISR_RXNE_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK)) || + ((s->isr & R_ISR_IDLE_MASK) && (s->cr1 & R_CR1_IDLEIE_MASK)) || + ((s->isr & R_ISR_ORE_MASK) && + ((s->cr1 & R_CR1_RXNEIE_MASK) || (s->cr3 & R_CR3_EIE_MASK))) || + /* TODO: Handle NF ? */ + ((s->isr & R_ISR_FE_MASK) && (s->cr3 & R_CR3_EIE_MASK)) || + ((s->isr & R_ISR_PE_MASK) && (s->cr1 & R_CR1_PEIE_MASK))) { + qemu_irq_raise(s->irq); + trace_stm32l4x5_usart_irq_raised(s->isr); + } else { + qemu_irq_lower(s->irq); + trace_stm32l4x5_usart_irq_lowered(); + } +} + +static int stm32l4x5_usart_base_can_receive(void *opaque) +{ + Stm32l4x5UsartBaseState *s = opaque; + + if (!(s->isr & R_ISR_RXNE_MASK)) { + return 1; + } + + return 0; +} + +static void stm32l4x5_usart_base_receive(void *opaque, const uint8_t *buf, + int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + + if (!((s->cr1 & R_CR1_UE_MASK) && (s->cr1 & R_CR1_RE_MASK))) { + trace_stm32l4x5_usart_receiver_not_enabled( + FIELD_EX32(s->cr1, CR1, UE), FIELD_EX32(s->cr1, CR1, RE)); + return; + } + + /* Check if overrun detection is enabled and if there is an overrun */ + if (!(s->cr3 & R_CR3_OVRDIS_MASK) && (s->isr & R_ISR_RXNE_MASK)) { + /* + * A character has been received while + * the previous has not been read = Overrun. + */ + s->isr |= R_ISR_ORE_MASK; + trace_stm32l4x5_usart_overrun_detected(s->rdr, *buf); + } else { + /* No overrun */ + s->rdr = *buf; + s->isr |= R_ISR_RXNE_MASK; + trace_stm32l4x5_usart_rx(s->rdr); + } + + stm32l4x5_update_irq(s); +} + +/* + * Try to send tx data, and arrange to be called back later if + * we can't (ie the char backend is busy/blocking). + */ +static gboolean usart_transmit(void *do_not_use, GIOCondition cond, + void *opaque) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(opaque); + int ret; + /* TODO: Handle 9 bits transmission */ + uint8_t ch = s->tdr; + + s->watch_tag = 0; + + if (!(s->cr1 & R_CR1_TE_MASK) || (s->isr & R_ISR_TXE_MASK)) { + return G_SOURCE_REMOVE; + } + + ret = qemu_chr_fe_write(&s->chr, &ch, 1); + if (ret <= 0) { + s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP, + usart_transmit, s); + if (!s->watch_tag) { + /* + * Most common reason to be here is "no chardev backend": + * just insta-drain the buffer, so the serial output + * goes into a void, rather than blocking the guest. + */ + goto buffer_drained; + } + /* Transmit pending */ + trace_stm32l4x5_usart_tx_pending(); + return G_SOURCE_REMOVE; + } + +buffer_drained: + /* Character successfully sent */ + trace_stm32l4x5_usart_tx(ch); + s->isr |= R_ISR_TC_MASK | R_ISR_TXE_MASK; + stm32l4x5_update_irq(s); + return G_SOURCE_REMOVE; +} + +static void usart_cancel_transmit(Stm32l4x5UsartBaseState *s) +{ + if (s->watch_tag) { + g_source_remove(s->watch_tag); + s->watch_tag = 0; + } +} + static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) { Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) s->isr = 0x020000C0; s->rdr = 0x00000000; s->tdr = 0x00000000; + + usart_cancel_transmit(s); + stm32l4x5_update_irq(s); +} + +static void usart_update_rqr(Stm32l4x5UsartBaseState *s, uint32_t value) +{ + /* TXFRQ */ + /* Reset RXNE flag */ + if (value & R_RQR_RXFRQ_MASK) { + s->isr &= ~R_ISR_RXNE_MASK; + } + /* MMRQ */ + /* SBKRQ */ + /* ABRRQ */ + stm32l4x5_update_irq(s); } static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, @@ -XXX,XX +XXX,XX @@ static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, retvalue = FIELD_EX32(s->rdr, RDR, RDR); /* Reset RXNE flag */ s->isr &= ~R_ISR_RXNE_MASK; + stm32l4x5_update_irq(s); break; case A_TDR: retvalue = FIELD_EX32(s->tdr, TDR, TDR); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, switch (addr) { case A_CR1: s->cr1 = value; + stm32l4x5_update_irq(s); return; case A_CR2: s->cr2 = value; @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, s->rtor = value; return; case A_RQR: + usart_update_rqr(s, value); return; case A_ISR: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, case A_ICR: /* Clear the status flags */ s->isr &= ~value; + stm32l4x5_update_irq(s); return; case A_RDR: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, return; case A_TDR: s->tdr = value; + s->isr &= ~R_ISR_TXE_MASK; + usart_transmit(NULL, G_IO_OUT, s); return; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_realize(DeviceState *dev, Error **errp) error_setg(errp, "USART clock must be wired up by SoC code"); return; } + + qemu_chr_fe_set_handlers(&s->chr, stm32l4x5_usart_base_can_receive, + stm32l4x5_usart_base_receive, NULL, NULL, + s, NULL, true); } static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data) diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size % # stm32l4x5_usart.c stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 "> -> 0x%" PRIx32 "" stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 "> <- 0x%" PRIx32 "" +stm32l4x5_usart_rx(uint8_t c) "USART: got character 0x%x from backend" +stm32l4x5_usart_tx(uint8_t c) "USART: character 0x%x sent to backend" +stm32l4x5_usart_tx_pending(void) "USART: character send to backend pending" +stm32l4x5_usart_irq_raised(uint32_t reg) "USART: IRQ raised: 0x%08"PRIx32 +stm32l4x5_usart_irq_lowered(void) "USART: IRQ lowered" +stm32l4x5_usart_overrun_detected(uint8_t current, uint8_t received) "USART: Overrun detected, RDR='0x%x', received 0x%x" +stm32l4x5_usart_receiver_not_enabled(uint8_t ue_bit, uint8_t re_bit) "USART: Receiver not enabled, UE=0x%x, RE=0x%x" # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add a function to change the settings of the serial connection. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-4-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32l4x5_usart.c | 98 +++++++++++++++++++++++++++++++++++++++ hw/char/trace-events | 1 + 2 files changed, 99 insertions(+) diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32l4x5_usart.c +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ static void usart_cancel_transmit(Stm32l4x5UsartBaseState *s) } } +static void stm32l4x5_update_params(Stm32l4x5UsartBaseState *s) +{ + int speed, parity, data_bits, stop_bits; + uint32_t value, usart_div; + QEMUSerialSetParams ssp; + + /* Select the parity type */ + if (s->cr1 & R_CR1_PCE_MASK) { + if (s->cr1 & R_CR1_PS_MASK) { + parity = 'O'; + } else { + parity = 'E'; + } + } else { + parity = 'N'; + } + + /* Select the number of stop bits */ + switch (FIELD_EX32(s->cr2, CR2, STOP)) { + case 0: + stop_bits = 1; + break; + case 2: + stop_bits = 2; + break; + default: + qemu_log_mask(LOG_UNIMP, + "UNIMPLEMENTED: fractionnal stop bits; CR2[13:12] = %u", + FIELD_EX32(s->cr2, CR2, STOP)); + return; + } + + /* Select the length of the word */ + switch ((FIELD_EX32(s->cr1, CR1, M1) << 1) | FIELD_EX32(s->cr1, CR1, M0)) { + case 0: + data_bits = 8; + break; + case 1: + data_bits = 9; + break; + case 2: + data_bits = 7; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "UNDEFINED: invalid word length, CR1.M = 0b11"); + return; + } + + /* Select the baud rate */ + value = FIELD_EX32(s->brr, BRR, BRR); + if (value < 16) { + qemu_log_mask(LOG_GUEST_ERROR, + "UNDEFINED: BRR less than 16: %u", value); + return; + } + + if (FIELD_EX32(s->cr1, CR1, OVER8) == 0) { + /* + * Oversampling by 16 + * BRR = USARTDIV + */ + usart_div = value; + } else { + /* + * Oversampling by 8 + * - BRR[2:0] = USARTDIV[3:0] shifted 1 bit to the right. + * - BRR[3] must be kept cleared. + * - BRR[15:4] = USARTDIV[15:4] + * - The frequency is multiplied by 2 + */ + usart_div = ((value & 0xFFF0) | ((value & 0x0007) << 1)) / 2; + } + + speed = clock_get_hz(s->clk) / usart_div; + + ssp.speed = speed; + ssp.parity = parity; + ssp.data_bits = data_bits; + ssp.stop_bits = stop_bits; + + qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); + + trace_stm32l4x5_usart_update_params(speed, parity, data_bits, stop_bits); +} + static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) { Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, switch (addr) { case A_CR1: s->cr1 = value; + stm32l4x5_update_params(s); stm32l4x5_update_irq(s); return; case A_CR2: s->cr2 = value; + stm32l4x5_update_params(s); return; case A_CR3: s->cr3 = value; return; case A_BRR: s->brr = value; + stm32l4x5_update_params(s); return; case A_GTPR: s->gtpr = value; @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_init(Object *obj) s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); } +static int stm32l4x5_usart_base_post_load(void *opaque, int version_id) +{ + Stm32l4x5UsartBaseState *s = (Stm32l4x5UsartBaseState *)opaque; + + stm32l4x5_update_params(s); + return 0; +} + static const VMStateDescription vmstate_stm32l4x5_usart_base = { .name = TYPE_STM32L4X5_USART_BASE, .version_id = 1, .minimum_version_id = 1, + .post_load = stm32l4x5_usart_base_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32(cr1, Stm32l4x5UsartBaseState), VMSTATE_UINT32(cr2, Stm32l4x5UsartBaseState), diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ stm32l4x5_usart_irq_raised(uint32_t reg) "USART: IRQ raised: 0x%08"PRIx32 stm32l4x5_usart_irq_lowered(void) "USART: IRQ lowered" stm32l4x5_usart_overrun_detected(uint8_t current, uint8_t received) "USART: Overrun detected, RDR='0x%x', received 0x%x" stm32l4x5_usart_receiver_not_enabled(uint8_t ue_bit, uint8_t re_bit) "USART: Receiver not enabled, UE=0x%x, RE=0x%x" +stm32l4x5_usart_update_params(int speed, uint8_t parity, int data, int stop) "USART: speed: %d, parity: %c, data bits: %d, stop bits: %d" # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add the USART to the SoC and connect it to the other implemented devices. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr [PMM: fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/b-l475e-iot01a.rst | 2 +- include/hw/arm/stm32l4x5_soc.h | 7 +++ hw/arm/stm32l4x5_soc.c | 83 +++++++++++++++++++++++++++--- hw/arm/Kconfig | 1 + 4 files changed, 86 insertions(+), 7 deletions(-) diff --git a/docs/system/arm/b-l475e-iot01a.rst b/docs/system/arm/b-l475e-iot01a.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/b-l475e-iot01a.rst +++ b/docs/system/arm/b-l475e-iot01a.rst @@ -XXX,XX +XXX,XX @@ Currently B-L475E-IOT01A machine's only supports the following devices: - STM32L4x5 SYSCFG (System configuration controller) - STM32L4x5 RCC (Reset and clock control) - STM32L4x5 GPIOs (General-purpose I/Os) +- STM32L4x5 USARTs, UARTs and LPUART (Serial ports) Missing devices """"""""""""""" The B-L475E-IOT01A does *not* support the following devices: -- Serial ports (UART) - Analog to Digital Converter (ADC) - SPI controller - Timer controller (TIMER) diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32l4x5_soc.h +++ b/include/hw/arm/stm32l4x5_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/stm32l4x5_exti.h" #include "hw/misc/stm32l4x5_rcc.h" #include "hw/gpio/stm32l4x5_gpio.h" +#include "hw/char/stm32l4x5_usart.h" #include "qom/object.h" #define TYPE_STM32L4X5_SOC "stm32l4x5-soc" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(Stm32l4x5SocState, Stm32l4x5SocClass, STM32L4X5_SOC) #define NUM_EXTI_OR_GATES 4 +#define STM_NUM_USARTS 3 +#define STM_NUM_UARTS 2 + struct Stm32l4x5SocState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5SocState { Stm32l4x5SyscfgState syscfg; Stm32l4x5RccState rcc; Stm32l4x5GpioState gpio[NUM_GPIOS]; + Stm32l4x5UsartBaseState usart[STM_NUM_USARTS]; + Stm32l4x5UsartBaseState uart[STM_NUM_UARTS]; + Stm32l4x5UsartBaseState lpuart; MemoryRegion sram1; MemoryRegion sram2; diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32l4x5_soc.c +++ b/hw/arm/stm32l4x5_soc.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/or-irq.h" #include "hw/arm/stm32l4x5_soc.h" +#include "hw/char/stm32l4x5_usart.h" #include "hw/gpio/stm32l4x5_gpio.h" #include "hw/qdev-clock.h" #include "hw/misc/unimp.h" @@ -XXX,XX +XXX,XX @@ static const struct { { 0x48001C00, 0x0000000F, 0x00000000, 0x00000000 }, }; +static const hwaddr usart_addr[] = { + 0x40013800, /* "USART1", 0x400 */ + 0x40004400, /* "USART2", 0x400 */ + 0x40004800, /* "USART3", 0x400 */ +}; +static const hwaddr uart_addr[] = { + 0x40004C00, /* "UART4" , 0x400 */ + 0x40005000 /* "UART5" , 0x400 */ +}; + +#define LPUART_BASE_ADDRESS 0x40008000 + +static const int usart_irq[] = { 37, 38, 39 }; +static const int uart_irq[] = { 52, 53 }; +#define LPUART_IRQ 70 + static void stm32l4x5_soc_initfn(Object *obj) { Stm32l4x5SocState *s = STM32L4X5_SOC(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_initfn(Object *obj) g_autofree char *name = g_strdup_printf("gpio%c", 'a' + i); object_initialize_child(obj, name, &s->gpio[i], TYPE_STM32L4X5_GPIO); } + + for (int i = 0; i < STM_NUM_USARTS; i++) { + object_initialize_child(obj, "usart[*]", &s->usart[i], + TYPE_STM32L4X5_USART); + } + + for (int i = 0; i < STM_NUM_UARTS; i++) { + object_initialize_child(obj, "uart[*]", &s->uart[i], + TYPE_STM32L4X5_UART); + } + object_initialize_child(obj, "lpuart1", &s->lpuart, + TYPE_STM32L4X5_LPUART); } static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) sysbus_mmio_map(busdev, 0, RCC_BASE_ADDRESS); sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, RCC_IRQ)); + /* USART devices */ + for (int i = 0; i < STM_NUM_USARTS; i++) { + g_autofree char *name = g_strdup_printf("usart%d-out", i + 1); + dev = DEVICE(&(s->usart[i])); + qdev_prop_set_chr(dev, "chardev", serial_hd(i)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), name)); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, usart_addr[i]); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i])); + } + + /* + * TODO: Connect the USARTs, UARTs and LPUART to the EXTI once the EXTI + * can handle other gpio-in than the gpios. (e.g. Direct Lines for the + * usarts) + */ + + /* UART devices */ + for (int i = 0; i < STM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d-out", STM_NUM_USARTS + i + 1); + dev = DEVICE(&(s->uart[i])); + qdev_prop_set_chr(dev, "chardev", serial_hd(STM_NUM_USARTS + i)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), name)); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, uart_addr[i]); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, uart_irq[i])); + } + + /* LPUART device*/ + dev = DEVICE(&(s->lpuart)); + qdev_prop_set_chr(dev, "chardev", serial_hd(STM_NUM_USARTS + STM_NUM_UARTS)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), "lpuart1-out")); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, LPUART_BASE_ADDRESS); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, LPUART_IRQ)); + /* APB1 BUS */ create_unimplemented_device("TIM2", 0x40000000, 0x400); create_unimplemented_device("TIM3", 0x40000400, 0x400); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("SPI2", 0x40003800, 0x400); create_unimplemented_device("SPI3", 0x40003C00, 0x400); /* RESERVED: 0x40004000, 0x400 */ - create_unimplemented_device("USART2", 0x40004400, 0x400); - create_unimplemented_device("USART3", 0x40004800, 0x400); - create_unimplemented_device("UART4", 0x40004C00, 0x400); - create_unimplemented_device("UART5", 0x40005000, 0x400); create_unimplemented_device("I2C1", 0x40005400, 0x400); create_unimplemented_device("I2C2", 0x40005800, 0x400); create_unimplemented_device("I2C3", 0x40005C00, 0x400); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("DAC1", 0x40007400, 0x400); create_unimplemented_device("OPAMP", 0x40007800, 0x400); create_unimplemented_device("LPTIM1", 0x40007C00, 0x400); - create_unimplemented_device("LPUART1", 0x40008000, 0x400); /* RESERVED: 0x40008400, 0x400 */ create_unimplemented_device("SWPMI1", 0x40008800, 0x400); /* RESERVED: 0x40008C00, 0x800 */ @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("TIM1", 0x40012C00, 0x400); create_unimplemented_device("SPI1", 0x40013000, 0x400); create_unimplemented_device("TIM8", 0x40013400, 0x400); - create_unimplemented_device("USART1", 0x40013800, 0x400); /* RESERVED: 0x40013C00, 0x400 */ create_unimplemented_device("TIM15", 0x40014000, 0x400); create_unimplemented_device("TIM16", 0x40014400, 0x400); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config STM32L4X5_SOC select STM32L4X5_SYSCFG select STM32L4X5_RCC select STM32L4X5_GPIO + select STM32L4X5_USART config XLNX_ZYNQMP_ARM bool -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Test: - read/write from/to the usart registers - send/receive a character/string over the serial port Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-6-arnaud.minier@telecom-paris.fr [PMM: fix checkpatch nits, remove commented out code] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/stm32l4x5_usart-test.c | 315 +++++++++++++++++++++++++++++ tests/qtest/meson.build | 4 +- 2 files changed, 318 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/stm32l4x5_usart-test.c diff --git a/tests/qtest/stm32l4x5_usart-test.c b/tests/qtest/stm32l4x5_usart-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/stm32l4x5_usart-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for STML4X5_USART + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "libqtest.h" +#include "hw/misc/stm32l4x5_rcc_internals.h" +#include "hw/registerfields.h" + +#define RCC_BASE_ADDR 0x40021000 +/* Use USART 1 ADDR, assume the others work the same */ +#define USART1_BASE_ADDR 0x40013800 + +/* See stm32l4x5_usart for definitions */ +REG32(CR1, 0x00) + FIELD(CR1, M1, 28, 1) + FIELD(CR1, OVER8, 15, 1) + FIELD(CR1, M0, 12, 1) + FIELD(CR1, PCE, 10, 1) + FIELD(CR1, TXEIE, 7, 1) + FIELD(CR1, RXNEIE, 5, 1) + FIELD(CR1, TE, 3, 1) + FIELD(CR1, RE, 2, 1) + FIELD(CR1, UE, 0, 1) +REG32(CR2, 0x04) +REG32(CR3, 0x08) + FIELD(CR3, OVRDIS, 12, 1) +REG32(BRR, 0x0C) +REG32(GTPR, 0x10) +REG32(RTOR, 0x14) +REG32(RQR, 0x18) +REG32(ISR, 0x1C) + FIELD(ISR, TXE, 7, 1) + FIELD(ISR, RXNE, 5, 1) + FIELD(ISR, ORE, 3, 1) +REG32(ICR, 0x20) +REG32(RDR, 0x24) +REG32(TDR, 0x28) + +#define NVIC_ISPR1 0XE000E204 +#define NVIC_ICPR1 0xE000E284 +#define USART1_IRQ 37 + +static bool check_nvic_pending(QTestState *qts, unsigned int n) +{ + /* No USART interrupts are less than 32 */ + assert(n > 32); + n -= 32; + return qtest_readl(qts, NVIC_ISPR1) & (1 << n); +} + +static bool clear_nvic_pending(QTestState *qts, unsigned int n) +{ + /* No USART interrupts are less than 32 */ + assert(n > 32); + n -= 32; + qtest_writel(qts, NVIC_ICPR1, (1 << n)); + return true; +} + +/* + * Wait indefinitely for the flag to be updated. + * If this is run on a slow CI runner, + * the meson harness will timeout after 10 minutes for us. + */ +static bool usart_wait_for_flag(QTestState *qts, uint32_t event_addr, + uint32_t flag) +{ + while (true) { + if ((qtest_readl(qts, event_addr) & flag)) { + return true; + } + g_usleep(1000); + } + + return false; +} + +static void usart_receive_string(QTestState *qts, int sock_fd, const char *in, + char *out) +{ + int i, in_len = strlen(in); + + g_assert_true(send(sock_fd, in, in_len, 0) == in_len); + for (i = 0; i < in_len; i++) { + g_assert_true(usart_wait_for_flag(qts, + USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK)); + out[i] = qtest_readl(qts, USART1_BASE_ADDR + A_RDR); + } + out[i] = '\0'; +} + +static void usart_send_string(QTestState *qts, const char *in) +{ + int i, in_len = strlen(in); + + for (i = 0; i < in_len; i++) { + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, in[i]); + g_assert_true(usart_wait_for_flag(qts, + USART1_BASE_ADDR + A_ISR, R_ISR_TXE_MASK)); + } +} + +/* Init the RCC clocks to run at 80 MHz */ +static void init_clocks(QTestState *qts) +{ + uint32_t value; + + /* MSIRANGE can be set only when MSI is OFF or READY */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CR), R_CR_MSION_MASK); + + /* Clocking from MSI, in case MSI was not the default source */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), 0); + + /* + * Update PLL and set MSI as the source clock. + * PLLM = 1 --> 000 + * PLLN = 40 --> 40 + * PPLLR = 2 --> 00 + * PLLDIV = unused, PLLP = unused (SAI3), PLLQ = unused (48M1) + * SRC = MSI --> 01 + */ + qtest_writel(qts, (RCC_BASE_ADDR + A_PLLCFGR), R_PLLCFGR_PLLREN_MASK | + (40 << R_PLLCFGR_PLLN_SHIFT) | + (0b01 << R_PLLCFGR_PLLSRC_SHIFT)); + + /* PLL activation */ + + value = qtest_readl(qts, (RCC_BASE_ADDR + A_CR)); + qtest_writel(qts, (RCC_BASE_ADDR + A_CR), value | R_CR_PLLON_MASK); + + /* RCC_CFGR is OK by defaut */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), 0); + + /* CCIPR : no periph clock by default */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CCIPR), 0); + + /* Switches on the PLL clock source */ + value = qtest_readl(qts, (RCC_BASE_ADDR + A_CFGR)); + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), (value & ~R_CFGR_SW_MASK) | + (0b11 << R_CFGR_SW_SHIFT)); + + /* Enable SYSCFG clock enabled */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2ENR), R_APB2ENR_SYSCFGEN_MASK); + + /* Enable the IO port B clock (See p.252) */ + qtest_writel(qts, (RCC_BASE_ADDR + A_AHB2ENR), R_AHB2ENR_GPIOBEN_MASK); + + /* Enable the clock for USART1 (cf p.259) */ + /* We rewrite SYSCFGEN to not disable it */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2ENR), + R_APB2ENR_SYSCFGEN_MASK | R_APB2ENR_USART1EN_MASK); + + /* TODO: Enable usart via gpio */ + + /* Set PCLK as the clock for USART1(cf p.272) i.e. reset both bits */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CCIPR), 0); + + /* Reset USART1 (see p.249) */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2RSTR), 1 << 14); + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2RSTR), 0); +} + +static void init_uart(QTestState *qts) +{ + uint32_t cr1; + + init_clocks(qts); + + /* + * For 115200 bauds, see p.1349. + * The clock has a frequency of 80Mhz, + * for 115200, we have to put a divider of 695 = 0x2B7. + */ + qtest_writel(qts, (USART1_BASE_ADDR + A_BRR), 0x2B7); + + /* + * Set the oversampling by 16, + * disable the parity control and + * set the word length to 8. (cf p.1377) + */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 &= ~(R_CR1_M1_MASK | R_CR1_M0_MASK | R_CR1_OVER8_MASK | R_CR1_PCE_MASK); + qtest_writel(qts, (USART1_BASE_ADDR + A_CR1), cr1); + + /* Enable the transmitter, the receiver and the USART. */ + qtest_writel(qts, (USART1_BASE_ADDR + A_CR1), + R_CR1_UE_MASK | R_CR1_RE_MASK | R_CR1_TE_MASK); +} + +static void test_write_read(void) +{ + QTestState *qts = qtest_init("-M b-l475e-iot01a"); + + /* Test that we can write and retrieve a value from the device */ + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 0xFFFFFFFF); + const uint32_t tdr = qtest_readl(qts, USART1_BASE_ADDR + A_TDR); + g_assert_cmpuint(tdr, ==, 0x000001FF); +} + +static void test_receive_char(void) +{ + int sock_fd; + uint32_t cr1; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + /* Try without initializing IRQ */ + g_assert_true(send(sock_fd, "a", 1, 0) == 1); + usart_wait_for_flag(qts, USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK); + g_assert_cmphex(qtest_readl(qts, USART1_BASE_ADDR + A_RDR), ==, 'a'); + g_assert_false(check_nvic_pending(qts, USART1_IRQ)); + + /* Now with the IRQ */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 |= R_CR1_RXNEIE_MASK; + qtest_writel(qts, USART1_BASE_ADDR + A_CR1, cr1); + g_assert_true(send(sock_fd, "b", 1, 0) == 1); + usart_wait_for_flag(qts, USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK); + g_assert_cmphex(qtest_readl(qts, USART1_BASE_ADDR + A_RDR), ==, 'b'); + g_assert_true(check_nvic_pending(qts, USART1_IRQ)); + clear_nvic_pending(qts, USART1_IRQ); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_send_char(void) +{ + int sock_fd; + char s[1]; + uint32_t cr1; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + /* Try without initializing IRQ */ + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 'c'); + g_assert_true(recv(sock_fd, s, 1, 0) == 1); + g_assert_cmphex(s[0], ==, 'c'); + g_assert_false(check_nvic_pending(qts, USART1_IRQ)); + + /* Now with the IRQ */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 |= R_CR1_TXEIE_MASK; + qtest_writel(qts, USART1_BASE_ADDR + A_CR1, cr1); + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 'd'); + g_assert_true(recv(sock_fd, s, 1, 0) == 1); + g_assert_cmphex(s[0], ==, 'd'); + g_assert_true(check_nvic_pending(qts, USART1_IRQ)); + clear_nvic_pending(qts, USART1_IRQ); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_receive_str(void) +{ + int sock_fd; + char s[10]; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + usart_receive_string(qts, sock_fd, "hello", s); + g_assert_true(memcmp(s, "hello", 5) == 0); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_send_str(void) +{ + int sock_fd; + char s[10]; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + usart_send_string(qts, "world"); + g_assert_true(recv(sock_fd, s, 10, 0) == 5); + g_assert_true(memcmp(s, "world", 5) == 0); + + close(sock_fd); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("stm32l4x5/usart/write_read", test_write_read); + qtest_add_func("stm32l4x5/usart/receive_char", test_receive_char); + qtest_add_func("stm32l4x5/usart/send_char", test_send_char); + qtest_add_func("stm32l4x5/usart/receive_str", test_receive_str); + qtest_add_func("stm32l4x5/usart/send_str", test_send_str); + ret = g_test_run(); + + return ret; +} + diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ slow_qtests = { 'npcm7xx_pwm-test': 300, 'npcm7xx_watchdog_timer-test': 120, 'qom-test' : 900, + 'stm32l4x5_usart-test' : 600, 'test-hmp' : 240, 'pxe-test': 610, 'prom-env-test': 360, @@ -XXX,XX +XXX,XX @@ qtests_stm32l4x5 = \ ['stm32l4x5_exti-test', 'stm32l4x5_syscfg-test', 'stm32l4x5_rcc-test', - 'stm32l4x5_gpio-test'] + 'stm32l4x5_gpio-test', + 'stm32l4x5_usart-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \ -- 2.34.1