The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 Hi; here's a queue of arm patches (plus a few elf2dmp changes); mostly these are minor cleanups and bugfixes. thanks -- PMM The following changes since commit deaca3fd30d3a8829160f8d3705d65ad83176800: Merge tag 'pull-vfio-20231018' of https://github.com/legoater/qemu into staging (2023-10-18 06:21:15 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20231019 for you to fetch changes up to 2a052b4ee01b3c413cef2ef49cb780cde17d4ba1: contrib/elf2dmp: Use g_malloc(), g_new() and g_free() (2023-10-19 14:32:13 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder * hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot' * xlnx devices: remove deprecated device reset * xlnx-bbram: hw/nvram: Use dot in device type name * elf2dmp: fix coverity issues * elf2dmp: convert to g_malloc, g_new and g_free * target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0 * hw/arm: refactor virt PPI logic * arm/kvm: convert to kvm_set_one_reg, kvm_get_one_reg * target/arm: Permit T32 LDM with single register * smmuv3: Advertise SMMUv3.1-XNX * target/arm: Implement FEAT_HPMN0 * Remove some unnecessary include lines * target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL * hw/timer/npcm7xx_timer: Prevent timer from counting down past zero ---------------------------------------------------------------- Chris Rauer (1): hw/timer/npcm7xx_timer: Prevent timer from counting down past zero Cornelia Huck (2): arm/kvm: convert to kvm_set_one_reg arm/kvm: convert to kvm_get_one_reg Leif Lindholm (3): {include/}hw/arm: refactor virt PPI logic include/hw/arm: move BSA definitions to bsa.h hw/arm/sbsa-ref: use bsa.h for PPI definitions Michal Orzel (1): target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0 Peter Maydell (8): target/arm: Permit T32 LDM with single register hw/arm/smmuv3: Update ID register bit field definitions hw/arm/smmuv3: Sort ID register setting into field order hw/arm/smmuv3: Advertise SMMUv3.1-XNX feature target/arm: Implement FEAT_HPMN0 target/arm/kvm64.c: Remove unused include target/arm/common-semi-target.h: Remove unnecessary boot.h include target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL Philippe Mathieu-Daudé (1): hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot.h' Suraj Shirvankar (1): contrib/elf2dmp: Use g_malloc(), g_new() and g_free() Thomas Huth (1): hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder Tong Ho (4): xlnx-bbram: hw/nvram: Remove deprecated device reset xlnx-zynqmp-efuse: hw/nvram: Remove deprecated device reset xlnx-versal-efuse: hw/nvram: Remove deprecated device reset xlnx-bbram: hw/nvram: Use dot in device type name Viktor Prutyanov (2): elf2dmp: limit print length for sign_rsds elf2dmp: check array bounds in pdb_get_file_size MAINTAINERS | 2 +- docs/system/arm/emulation.rst | 1 + hw/arm/smmuv3-internal.h | 38 ++++++++ include/hw/arm/bsa.h | 35 +++++++ include/hw/arm/exynos4210.h | 2 +- include/hw/{misc => arm}/raspberrypi-fw-defs.h | 0 include/hw/arm/virt.h | 12 +-- include/hw/nvram/xlnx-bbram.h | 2 +- target/arm/common-semi-target.h | 4 +- target/arm/cpu-qom.h | 2 - target/arm/cpu.h | 22 +++++ contrib/elf2dmp/addrspace.c | 7 +- contrib/elf2dmp/main.c | 11 +-- contrib/elf2dmp/pdb.c | 32 ++++--- contrib/elf2dmp/qemu_elf.c | 7 +- hw/arm/boot.c | 95 +++++-------------- hw/arm/sbsa-ref.c | 21 ++--- hw/arm/smmuv3.c | 8 +- hw/arm/virt-acpi-build.c | 12 +-- hw/arm/virt.c | 24 +++-- hw/misc/bcm2835_property.c | 2 +- hw/nvram/xlnx-bbram.c | 8 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 8 +- hw/nvram/xlnx-zynqmp-efuse.c | 8 +- hw/timer/npcm7xx_timer.c | 3 + target/arm/arm-powerctl.c | 53 +---------- target/arm/cpu.c | 95 +++++++++++++++++++ target/arm/helper.c | 19 +--- target/arm/kvm.c | 28 ++---- target/arm/kvm64.c | 124 +++++++------------------ target/arm/tcg/cpu32.c | 4 + target/arm/tcg/cpu64.c | 1 + target/arm/tcg/translate.c | 37 +++++--- 33 files changed, 368 insertions(+), 359 deletions(-) create mode 100644 include/hw/arm/bsa.h rename include/hw/{misc => arm}/raspberrypi-fw-defs.h (100%) From: Thomas Huth <thuth@redhat.com> The file is obviously related to the raspberrypi machine, so it should reside in hw/arm/ instead of hw/misc/. And while we're at it, also adjust the wildcard in MAINTAINERS so that it covers this file, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231012073458.860187-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- include/hw/{misc => arm}/raspberrypi-fw-defs.h | 0 hw/misc/bcm2835_property.c | 2 +- 3 files changed, 2 insertions(+), 2 deletions(-) rename include/hw/{misc => arm}/raspberrypi-fw-defs.h (100%) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: hw/arm/raspi.c F: hw/arm/raspi_platform.h F: hw/*/bcm283* -F: include/hw/arm/raspi* +F: include/hw/arm/rasp* F: include/hw/*/bcm283* F: docs/system/arm/raspi.rst diff --git a/include/hw/misc/raspberrypi-fw-defs.h b/include/hw/arm/raspberrypi-fw-defs.h similarity index 100% rename from include/hw/misc/raspberrypi-fw-defs.h rename to include/hw/arm/raspberrypi-fw-defs.h diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ #include "migration/vmstate.h" #include "hw/irq.h" #include "hw/misc/bcm2835_mbox_defs.h" -#include "hw/misc/raspberrypi-fw-defs.h" +#include "hw/arm/raspberrypi-fw-defs.h" #include "sysemu/dma.h" #include "qemu/log.h" #include "qemu/module.h" -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> struct arm_boot_info is declared in "hw/arm/boot.h". By including the correct header we don't need to declare it again in "target/arm/cpu-qom.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20231013130214.95742-1-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/exynos4210.h | 2 +- target/arm/cpu-qom.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/exynos4210_gic.h" #include "hw/intc/exynos4210_combiner.h" #include "hw/core/split-irq.h" -#include "target/arm/cpu-qom.h" +#include "hw/arm/boot.h" #include "qom/object.h" #define EXYNOS4210_NCPUS 2 diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-qom.h +++ b/target/arm/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #include "hw/core/cpu.h" #include "qom/object.h" -struct arm_boot_info; - #define TYPE_ARM_CPU "arm-cpu" OBJECT_DECLARE_CPU_TYPE(ARMCPU, ARMCPUClass, ARM_CPU) -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231003052345.199725-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-bbram.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-bbram.c b/hw/nvram/xlnx-bbram.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-bbram.c +++ b/hw/nvram/xlnx-bbram.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the Xilinx BBRAM Battery Backed RAM * * Copyright (c) 2014-2021 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ static RegisterAccessInfo bbram_ctrl_regs_info[] = { } }; -static void bbram_ctrl_reset(DeviceState *dev) +static void bbram_ctrl_reset_hold(Object *obj) { - XlnxBBRam *s = XLNX_BBRAM(dev); + XlnxBBRam *s = XLNX_BBRAM(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property bbram_ctrl_props[] = { static void bbram_ctrl_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = bbram_ctrl_reset; + rc->phases.hold = bbram_ctrl_reset_hold; dc->realize = bbram_ctrl_realize; dc->vmsd = &vmstate_bbram_ctrl; device_class_set_props(dc, bbram_ctrl_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231004055713.324009-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-zynqmp-efuse.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-zynqmp-efuse.c b/hw/nvram/xlnx-zynqmp-efuse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-zynqmp-efuse.c +++ b/hw/nvram/xlnx-zynqmp-efuse.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the ZynqMP eFuse * * Copyright (c) 2015 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Written by Edgar E. Iglesias <edgari@xilinx.com> * @@ -XXX,XX +XXX,XX @@ static void zynqmp_efuse_register_reset(RegisterInfo *reg) register_reset(reg); } -static void zynqmp_efuse_reset(DeviceState *dev) +static void zynqmp_efuse_reset_hold(Object *obj) { - XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(dev); + XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property zynqmp_efuse_props[] = { static void zynqmp_efuse_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = zynqmp_efuse_reset; + rc->phases.hold = zynqmp_efuse_reset_hold; dc->realize = zynqmp_efuse_realize; dc->vmsd = &vmstate_efuse; device_class_set_props(dc, zynqmp_efuse_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231004055339.323833-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-versal-efuse-ctrl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-versal-efuse-ctrl.c b/hw/nvram/xlnx-versal-efuse-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-versal-efuse-ctrl.c +++ b/hw/nvram/xlnx-versal-efuse-ctrl.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the Versal eFuse controller * * Copyright (c) 2020 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ static void efuse_ctrl_register_reset(RegisterInfo *reg) register_reset(reg); } -static void efuse_ctrl_reset(DeviceState *dev) +static void efuse_ctrl_reset_hold(Object *obj) { - XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(dev); + XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property efuse_ctrl_props[] = { static void efuse_ctrl_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = efuse_ctrl_reset; + rc->phases.hold = efuse_ctrl_reset_hold; dc->realize = efuse_ctrl_realize; dc->vmsd = &vmstate_efuse_ctrl; device_class_set_props(dc, efuse_ctrl_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This replaces the comma (,) to dot (.) in the device type name so the name can be used with the 'driver=' command line option. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231003052139.199665-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/nvram/xlnx-bbram.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/hw/nvram/xlnx-bbram.h b/include/hw/nvram/xlnx-bbram.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/nvram/xlnx-bbram.h +++ b/include/hw/nvram/xlnx-bbram.h @@ -XXX,XX +XXX,XX @@ #define RMAX_XLNX_BBRAM ((0x4c / 4) + 1) -#define TYPE_XLNX_BBRAM "xlnx,bbram-ctrl" +#define TYPE_XLNX_BBRAM "xlnx.bbram-ctrl" OBJECT_DECLARE_SIMPLE_TYPE(XlnxBBRam, XLNX_BBRAM); struct XlnxBBRam { -- 2.34.1 From: Viktor Prutyanov <viktor@daynix.com> String sign_rsds isn't terminated, so the print length must be limited. Fixes: Coverity CID 1521598 Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20230930235317.11469-2-viktor@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/contrib/elf2dmp/main.c b/contrib/elf2dmp/main.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/main.c +++ b/contrib/elf2dmp/main.c @@ -XXX,XX +XXX,XX @@ static bool pe_check_pdb_name(uint64_t base, void *start_addr, } if (memcmp(&rsds->Signature, sign_rsds, sizeof(sign_rsds))) { - eprintf("CodeView signature is \'%.4s\', \'%s\' expected\n", + eprintf("CodeView signature is \'%.4s\', \'%.4s\' expected\n", rsds->Signature, sign_rsds); return false; } -- 2.34.1 From: Viktor Prutyanov <viktor@daynix.com> Index in file_size array must be checked against num_files, because the entries we are looking for may be absent in the PDB. Fixes: Coverity CID 1521597 Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230930235317.11469-3-viktor@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/pdb.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/contrib/elf2dmp/pdb.c b/contrib/elf2dmp/pdb.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/pdb.c +++ b/contrib/elf2dmp/pdb.c @@ -XXX,XX +XXX,XX @@ static uint32_t pdb_get_file_size(const struct pdb_reader *r, unsigned idx) { + if (idx >= r->ds.toc->num_files) { + return 0; + } + return r->ds.toc->file_size[idx]; } @@ -XXX,XX +XXX,XX @@ static void *pdb_ds_read_file(struct pdb_reader* r, uint32_t file_number) static int pdb_init_segments(struct pdb_reader *r) { - char *segs; unsigned stream_idx = r->segments; - segs = pdb_ds_read_file(r, stream_idx); - if (!segs) { + r->segs = pdb_ds_read_file(r, stream_idx); + if (!r->segs) { return 1; } - r->segs = segs; r->segs_size = pdb_get_file_size(r, stream_idx); + if (!r->segs_size) { + return 1; + } return 0; } -- 2.34.1 From: Michal Orzel <michal.orzel@amd.com> On an attempt to access CNTPCT_EL0 from EL0 using a guest running on top of Xen, a trap from EL2 was observed which is something not reproducible on HW (also, Xen does not trap accesses to physical counter). This is because gt_counter_access() checks for an incorrect bit (1 instead of 0) of CNTHCTL_EL2 if HCR_EL2.E2H is 0 and access is made to physical counter. Refer ARM ARM DDI 0487J.a, D19.12.2: When HCR_EL2.E2H is 0: - EL1PCTEN, bit [0]: refers to physical counter - EL1PCEN, bit [1]: refers to physical timer registers Drop entire block "if (hcr & HCR_E2H) {...} else {...}" from EL0 case and fall through to EL1 case, given that after fixing checking for the correct bit, the handling is the same. Fixes: 5bc8437136fb ("target/arm: Update timer access for VHE") Signed-off-by: Michal Orzel <michal.orzel@amd.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Message-id: 20230928094404.20802-1-michal.orzel@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, if (!extract32(env->cp15.c14_cntkctl, timeridx, 1)) { return CP_ACCESS_TRAP; } - - /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PCTEN. */ - if (hcr & HCR_E2H) { - if (timeridx == GTIMER_PHYS && - !extract32(env->cp15.cnthctl_el2, 10, 1)) { - return CP_ACCESS_TRAP_EL2; - } - } else { - /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */ - if (has_el2 && timeridx == GTIMER_PHYS && - !extract32(env->cp15.cnthctl_el2, 1, 1)) { - return CP_ACCESS_TRAP_EL2; - } - } - break; - + /* fall through */ case 1: /* Check CNTHCTL_EL2.EL1PCTEN, which changes location based on E2H. */ if (has_el2 && timeridx == GTIMER_PHYS && -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> GIC Private Peripheral Interrupts (PPI) are defined as GIC INTID 16-31. As in, PPI0 is INTID16 .. PPI15 is INTID31. Arm's Base System Architecture specification (BSA) lists the mandated and recommended private interrupt IDs by INTID, not by PPI index. But current definitions in virt define them by PPI index, complicating cross referencing. Meanwhile, the PPI(x) macro counterintuitively adds 16 to the input value, converting a PPI index to an INTID. Resolve this by redefining the BSA-allocated PPIs by their INTIDs, and replacing the PPI(x) macro with an INTID_TO_PPI(x) one where required. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-2-quic_llindhol@quicinc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 14 +++++++------- hw/arm/virt-acpi-build.c | 12 ++++++------ hw/arm/virt.c | 24 ++++++++++++++---------- 3 files changed, 27 insertions(+), 23 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ #define NUM_VIRTIO_TRANSPORTS 32 #define NUM_SMMU_IRQS 4 -#define ARCH_GIC_MAINT_IRQ 9 +#define ARCH_GIC_MAINT_IRQ 25 -#define ARCH_TIMER_VIRT_IRQ 11 -#define ARCH_TIMER_S_EL1_IRQ 13 -#define ARCH_TIMER_NS_EL1_IRQ 14 -#define ARCH_TIMER_NS_EL2_IRQ 10 +#define ARCH_TIMER_VIRT_IRQ 27 +#define ARCH_TIMER_S_EL1_IRQ 29 +#define ARCH_TIMER_NS_EL1_IRQ 30 +#define ARCH_TIMER_NS_EL2_IRQ 26 -#define VIRTUAL_PMU_IRQ 7 +#define VIRTUAL_PMU_IRQ 23 -#define PPI(irq) ((irq) + 16) +#define INTID_TO_PPI(irq) ((irq) - 16) /* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ #define PVTIME_SIZE_PER_CPU 64 diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * The interrupt values are the same with the device tree when adding 16 */ /* Secure EL1 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_S_EL1_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_S_EL1_IRQ, 4); /* Secure EL1 timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* Non-Secure EL1 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL1_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL1_IRQ, 4); /* Non-Secure EL1 timer Flags */ build_append_int_noprefix(table_data, irqflags | 1UL << 2, /* Always-on Capability */ 4); /* Virtual timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_VIRT_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_VIRT_IRQ, 4); /* Virtual Timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* Non-Secure EL2 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_IRQ, 4); /* Non-Secure EL2 timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* CntReadBase Physical address */ @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); uint64_t physical_base_address = 0, gich = 0, gicv = 0; - uint32_t vgic_interrupt = vms->virt ? PPI(ARCH_GIC_MAINT_IRQ) : 0; + uint32_t vgic_interrupt = vms->virt ? ARCH_GIC_MAINT_IRQ : 0; uint32_t pmu_interrupt = arm_feature(&armcpu->env, ARM_FEATURE_PMU) ? - PPI(VIRTUAL_PMU_IRQ) : 0; + VIRTUAL_PMU_IRQ : 0; if (vms->gic_version == VIRT_GIC_VERSION_2) { physical_base_address = memmap[VIRT_GIC_CPU].base; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_S_EL1_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL1_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_VIRT_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL2_IRQ, irqflags); + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); - int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int intidbase = NUM_IRQS + i * GIC_INTERNAL; /* Mapping from the output timer irq lines from the CPU to the * GIC PPI inputs we use for the virt board. */ @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(vms->gic, - ppibase + timer_irq[irq])); + intidbase + timer_irq[irq])); } if (vms->gic_version != VIRT_GIC_VERSION_2) { qemu_irq irq = qdev_get_gpio_in(vms->gic, - ppibase + ARCH_GIC_MAINT_IRQ); + intidbase + ARCH_GIC_MAINT_IRQ); qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, irq); } else if (vms->virt) { qemu_irq irq = qdev_get_gpio_in(vms->gic, - ppibase + ARCH_GIC_MAINT_IRQ); + intidbase + ARCH_GIC_MAINT_IRQ); sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, irq); } qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(vms->gic, ppibase + qdev_get_gpio_in(vms->gic, intidbase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); @@ -XXX,XX +XXX,XX @@ static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) if (pmu) { assert(arm_feature(&ARM_CPU(cpu)->env, ARM_FEATURE_PMU)); if (kvm_irqchip_in_kernel()) { - kvm_arm_pmu_set_irq(cpu, PPI(VIRTUAL_PMU_IRQ)); + kvm_arm_pmu_set_irq(cpu, VIRTUAL_PMU_IRQ); } kvm_arm_pmu_init(cpu); } -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> virt.h defines a number of IRQs that are ultimately described by Arm's Base System Architecture specification. Move these to a dedicated header so that they can be reused by other platforms that do the same. Include that header from virt.h to minimise churn. While we're moving the definitions, sort them into numerical order, and add the ARCH_TIMER_NS_EL2_VIRT_IRQ definition used by sbsa-ref and which will eventually be needed by virt also. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-3-quic_llindhol@quicinc.com [PMM: Remove unused PPI_TO_INTID macro; sort numerically; add ARCH_TIMER_NS_EL2_VIRT_IRQ] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bsa.h | 35 +++++++++++++++++++++++++++++++++++ include/hw/arm/virt.h | 12 +----------- 2 files changed, 36 insertions(+), 11 deletions(-) create mode 100644 include/hw/arm/bsa.h diff --git a/include/hw/arm/bsa.h b/include/hw/arm/bsa.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/bsa.h @@ -XXX,XX +XXX,XX @@ +/* + * Common definitions for Arm Base System Architecture (BSA) platforms. + * + * Copyright (c) 2015 Linaro Limited + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef QEMU_ARM_BSA_H +#define QEMU_ARM_BSA_H + +/* These are architectural INTID values */ +#define VIRTUAL_PMU_IRQ 23 +#define ARCH_GIC_MAINT_IRQ 25 +#define ARCH_TIMER_NS_EL2_IRQ 26 +#define ARCH_TIMER_VIRT_IRQ 27 +#define ARCH_TIMER_NS_EL2_VIRT_IRQ 28 +#define ARCH_TIMER_S_EL1_IRQ 29 +#define ARCH_TIMER_NS_EL1_IRQ 30 + +#define INTID_TO_PPI(irq) ((irq) - 16) + +#endif /* QEMU_ARM_BSA_H */ diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ #include "qemu/notify.h" #include "hw/boards.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" #include "hw/block/flash.h" #include "sysemu/kvm.h" #include "hw/intc/arm_gicv3_common.h" @@ -XXX,XX +XXX,XX @@ #define NUM_VIRTIO_TRANSPORTS 32 #define NUM_SMMU_IRQS 4 -#define ARCH_GIC_MAINT_IRQ 25 - -#define ARCH_TIMER_VIRT_IRQ 27 -#define ARCH_TIMER_S_EL1_IRQ 29 -#define ARCH_TIMER_NS_EL1_IRQ 30 -#define ARCH_TIMER_NS_EL2_IRQ 26 - -#define VIRTUAL_PMU_IRQ 23 - -#define INTID_TO_PPI(irq) ((irq) - 16) - /* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ #define PVTIME_SIZE_PER_CPU 64 -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> Use the private peripheral interrupt definitions from bsa.h instead of defining them locally. Refactor to use the INTIDs defined there instead of the PPI# used previously. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-4-quic_llindhol@quicinc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ * ARM SBSA Reference Platform emulation * * Copyright (c) 2018 Linaro Limited + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. * Written by Hongbo Zhang <hongbo.zhang@linaro.org> * * This program is free software; you can redistribute it and/or modify it @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "kvm_arm.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" #include "hw/arm/fdt.h" #include "hw/arm/smmuv3.h" #include "hw/block/flash.h" @@ -XXX,XX +XXX,XX @@ #define NUM_SMMU_IRQS 4 #define NUM_SATA_PORTS 6 -#define VIRTUAL_PMU_IRQ 7 -#define ARCH_GIC_MAINT_IRQ 9 -#define ARCH_TIMER_VIRT_IRQ 11 -#define ARCH_TIMER_S_EL1_IRQ 13 -#define ARCH_TIMER_NS_EL1_IRQ 14 -#define ARCH_TIMER_NS_EL2_IRQ 10 -#define ARCH_TIMER_NS_EL2_VIRT_IRQ 12 - enum { SBSA_FLASH, SBSA_MEM, @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); - int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int intidbase = NUM_IRQS + i * GIC_INTERNAL; int irq; /* * Mapping from the output timer irq lines from the CPU to the @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(sms->gic, - ppibase + timer_irq[irq])); + intidbase + timer_irq[irq])); } qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase + qdev_get_gpio_in(sms->gic, + intidbase + ARCH_GIC_MAINT_IRQ)); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase + qdev_get_gpio_in(sms->gic, + intidbase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> We can neaten the code by switching to the kvm_set_one_reg function. Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231010142453.224369-2-cohuck@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 13 +++------ target/arm/kvm64.c | 66 +++++++++++++--------------------------------- 2 files changed, 21 insertions(+), 58 deletions(-) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) bool ok = true; for (i = 0; i < cpu->cpreg_array_len; i++) { - struct kvm_one_reg r; uint64_t regidx = cpu->cpreg_indexes[i]; uint32_t v32; int ret; @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) continue; } - r.id = regidx; switch (regidx & KVM_REG_SIZE_MASK) { case KVM_REG_SIZE_U32: v32 = cpu->cpreg_values[i]; - r.addr = (uintptr_t)&v32; + ret = kvm_set_one_reg(cs, regidx, &v32); break; case KVM_REG_SIZE_U64: - r.addr = (uintptr_t)(cpu->cpreg_values + i); + ret = kvm_set_one_reg(cs, regidx, cpu->cpreg_values + i); break; default: g_assert_not_reached(); } - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r); if (ret) { /* We might fail for "unknown register" and also for * "you tried to set a register which is constant with @@ -XXX,XX +XXX,XX @@ void kvm_arm_get_virtual_time(CPUState *cs) void kvm_arm_put_virtual_time(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); - struct kvm_one_reg reg = { - .id = KVM_REG_ARM_TIMER_CNT, - .addr = (uintptr_t)&cpu->kvm_vtime, - }; int ret; if (!cpu->kvm_vtime_dirty) { return; } - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM_TIMER_CNT, &cpu->kvm_vtime); if (ret) { error_report("Failed to set KVM_REG_ARM_TIMER_CNT"); abort(); diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ static int kvm_arm_sve_set_vls(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); uint64_t vls[KVM_ARM64_SVE_VLS_WORDS] = { cpu->sve_vq.map }; - struct kvm_one_reg reg = { - .id = KVM_REG_ARM64_SVE_VLS, - .addr = (uint64_t)&vls[0], - }; assert(cpu->sve_max_vq <= KVM_ARM64_SVE_VQ_MAX); - return kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + return kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_VLS, &vls[0]); } #define ARM_CPU_ID_MPIDR 3, 0, 0, 0, 5 @@ -XXX,XX +XXX,XX @@ static void kvm_inject_arm_sea(CPUState *c) static int kvm_arch_put_fpsimd(CPUState *cs) { CPUARMState *env = &ARM_CPU(cs)->env; - struct kvm_one_reg reg; int i, ret; for (i = 0; i < 32; i++) { uint64_t *q = aa64_vfp_qreg(env, i); #if HOST_BIG_ENDIAN uint64_t fp_val[2] = { q[1], q[0] }; - reg.addr = (uintptr_t)fp_val; + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), + fp_val); #else - reg.addr = (uintptr_t)q; + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), q); #endif - reg.id = AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) CPUARMState *env = &cpu->env; uint64_t tmp[ARM_MAX_VQ * 2]; uint64_t *r; - struct kvm_one_reg reg; int n, ret; for (n = 0; n < KVM_ARM64_SVE_NUM_ZREGS; ++n) { r = sve_bswap64(tmp, &env->vfp.zregs[n].d[0], cpu->sve_max_vq * 2); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_ZREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_ZREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) for (n = 0; n < KVM_ARM64_SVE_NUM_PREGS; ++n) { r = sve_bswap64(tmp, r = &env->vfp.pregs[n].p[0], DIV_ROUND_UP(cpu->sve_max_vq * 2, 8)); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_PREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_PREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) r = sve_bswap64(tmp, &env->vfp.pregs[FFR_PRED_NUM].p[0], DIV_ROUND_UP(cpu->sve_max_vq * 2, 8)); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_FFR(0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_FFR(0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) int kvm_arch_put_registers(CPUState *cs, int level) { - struct kvm_one_reg reg; uint64_t val; uint32_t fpr; int i, ret; @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) } for (i = 0; i < 31; i++) { - reg.id = AARCH64_CORE_REG(regs.regs[i]); - reg.addr = (uintptr_t) &env->xregs[i]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.regs[i]), + &env->xregs[i]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) */ aarch64_save_sp(env, 1); - reg.id = AARCH64_CORE_REG(regs.sp); - reg.addr = (uintptr_t) &env->sp_el[0]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.sp), &env->sp_el[0]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(sp_el1); - reg.addr = (uintptr_t) &env->sp_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(sp_el1), &env->sp_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) } else { val = cpsr_read(env); } - reg.id = AARCH64_CORE_REG(regs.pstate); - reg.addr = (uintptr_t) &val; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.pstate), &val); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(regs.pc); - reg.addr = (uintptr_t) &env->pc; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.pc), &env->pc); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(elr_el1); - reg.addr = (uintptr_t) &env->elr_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(elr_el1), &env->elr_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) /* KVM 0-4 map to QEMU banks 1-5 */ for (i = 0; i < KVM_NR_SPSR; i++) { - reg.id = AARCH64_CORE_REG(spsr[i]); - reg.addr = (uintptr_t) &env->banked_spsr[i + 1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(spsr[i]), + &env->banked_spsr[i + 1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) return ret; } - reg.addr = (uintptr_t)(&fpr); fpr = vfp_get_fpsr(env); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpsr); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpsr), &fpr); if (ret) { return ret; } - reg.addr = (uintptr_t)(&fpr); fpr = vfp_get_fpcr(env); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpcr); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpcr), &fpr); if (ret) { return ret; } -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> We can neaten the code by switching the callers that work on a CPUstate to the kvm_get_one_reg function. Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231010142453.224369-3-cohuck@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 15 +++--------- target/arm/kvm64.c | 57 ++++++++++++---------------------------------- 2 files changed, 18 insertions(+), 54 deletions(-) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ bool write_kvmstate_to_list(ARMCPU *cpu) bool ok = true; for (i = 0; i < cpu->cpreg_array_len; i++) { - struct kvm_one_reg r; uint64_t regidx = cpu->cpreg_indexes[i]; uint32_t v32; int ret; - r.id = regidx; - switch (regidx & KVM_REG_SIZE_MASK) { case KVM_REG_SIZE_U32: - r.addr = (uintptr_t)&v32; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); + ret = kvm_get_one_reg(cs, regidx, &v32); if (!ret) { cpu->cpreg_values[i] = v32; } break; case KVM_REG_SIZE_U64: - r.addr = (uintptr_t)(cpu->cpreg_values + i); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); + ret = kvm_get_one_reg(cs, regidx, cpu->cpreg_values + i); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu) void kvm_arm_get_virtual_time(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); - struct kvm_one_reg reg = { - .id = KVM_REG_ARM_TIMER_CNT, - .addr = (uintptr_t)&cpu->kvm_vtime, - }; int ret; if (cpu->kvm_vtime_dirty) { return; } - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM_TIMER_CNT, &cpu->kvm_vtime); if (ret) { error_report("Failed to get KVM_REG_ARM_TIMER_CNT"); abort(); diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) static int kvm_arch_get_fpsimd(CPUState *cs) { CPUARMState *env = &ARM_CPU(cs)->env; - struct kvm_one_reg reg; int i, ret; for (i = 0; i < 32; i++) { uint64_t *q = aa64_vfp_qreg(env, i); - reg.id = AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]); - reg.addr = (uintptr_t)q; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), q); if (ret) { return ret; } else { @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; - struct kvm_one_reg reg; uint64_t *r; int n, ret; for (n = 0; n < KVM_ARM64_SVE_NUM_ZREGS; ++n) { r = &env->vfp.zregs[n].d[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_ZREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_ZREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) for (n = 0; n < KVM_ARM64_SVE_NUM_PREGS; ++n) { r = &env->vfp.pregs[n].p[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_PREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_PREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) } r = &env->vfp.pregs[FFR_PRED_NUM].p[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_FFR(0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_FFR(0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) int kvm_arch_get_registers(CPUState *cs) { - struct kvm_one_reg reg; uint64_t val; unsigned int el; uint32_t fpr; @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) CPUARMState *env = &cpu->env; for (i = 0; i < 31; i++) { - reg.id = AARCH64_CORE_REG(regs.regs[i]); - reg.addr = (uintptr_t) &env->xregs[i]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.regs[i]), + &env->xregs[i]); if (ret) { return ret; } } - reg.id = AARCH64_CORE_REG(regs.sp); - reg.addr = (uintptr_t) &env->sp_el[0]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.sp), &env->sp_el[0]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(sp_el1); - reg.addr = (uintptr_t) &env->sp_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(sp_el1), &env->sp_el[1]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(regs.pstate); - reg.addr = (uintptr_t) &val; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.pstate), &val); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) */ aarch64_restore_sp(env, 1); - reg.id = AARCH64_CORE_REG(regs.pc); - reg.addr = (uintptr_t) &env->pc; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.pc), &env->pc); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) aarch64_sync_64_to_32(env); } - reg.id = AARCH64_CORE_REG(elr_el1); - reg.addr = (uintptr_t) &env->elr_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(elr_el1), &env->elr_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) * KVM SPSRs 0-4 map to QEMU banks 1-5 */ for (i = 0; i < KVM_NR_SPSR; i++) { - reg.id = AARCH64_CORE_REG(spsr[i]); - reg.addr = (uintptr_t) &env->banked_spsr[i + 1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(spsr[i]), + &env->banked_spsr[i + 1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) return ret; } - reg.addr = (uintptr_t)(&fpr); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpsr); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpsr), &fpr); if (ret) { return ret; } vfp_set_fpsr(env, fpr); - reg.addr = (uintptr_t)(&fpr); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpcr); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpcr), &fpr); if (ret) { return ret; } -- 2.34.1 For the Thumb T32 encoding of LDM, if only a single register is specified in the register list this instruction is UNPREDICTABLE, with the following choices: * instruction UNDEFs * instruction is a NOP * instruction loads a single register * instruction loads an unspecified set of registers Currently we choose to UNDEF (a behaviour chosen in commit 4b222545dbf30 in 2019; previously we treated it as "load the specified single register"). Unfortunately there is real world code out there (which shipped in at least Android 11, 12 and 13) which incorrectly uses this UNPREDICTABLE insn on the assumption that it does a single register load, which is (presumably) what it happens to do on real hardware, and is also what it does on the equivalent A32 encoding. Revert to the pre-4b222545dbf30 behaviour of not UNDEFing for this T32 encoding. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1799 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230927101853.39288-1-peter.maydell@linaro.org --- target/arm/tcg/translate.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void op_addr_block_post(DisasContext *s, arg_ldst_block *a, } } -static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) +static bool op_stm(DisasContext *s, arg_ldst_block *a) { int i, j, n, list, mem_idx; bool user = a->u; @@ -XXX,XX +XXX,XX @@ static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) list = a->list; n = ctpop16(list); - if (n < min_n || a->rn == 15) { + /* + * This is UNPREDICTABLE for n < 1 in all encodings, and we choose + * to UNDEF. In the T32 STM encoding n == 1 is also UNPREDICTABLE, + * but hardware treats it like the A32 version and implements the + * single-register-store, and some in-the-wild (buggy) software + * assumes that, so we don't UNDEF on that case. + */ + if (n < 1 || a->rn == 15) { unallocated_encoding(s); return true; } @@ -XXX,XX +XXX,XX @@ static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) static bool trans_STM(DisasContext *s, arg_ldst_block *a) { - /* BitCount(list) < 1 is UNPREDICTABLE */ - return op_stm(s, a, 1); + return op_stm(s, a); } static bool trans_STM_t32(DisasContext *s, arg_ldst_block *a) @@ -XXX,XX +XXX,XX @@ static bool trans_STM_t32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 2 is UNPREDICTABLE */ - return op_stm(s, a, 2); + return op_stm(s, a); } -static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) +static bool do_ldm(DisasContext *s, arg_ldst_block *a) { int i, j, n, list, mem_idx; bool loaded_base; @@ -XXX,XX +XXX,XX @@ static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) list = a->list; n = ctpop16(list); - if (n < min_n || a->rn == 15) { + /* + * This is UNPREDICTABLE for n < 1 in all encodings, and we choose + * to UNDEF. In the T32 LDM encoding n == 1 is also UNPREDICTABLE, + * but hardware treats it like the A32 version and implements the + * single-register-load, and some in-the-wild (buggy) software + * assumes that, so we don't UNDEF on that case. + */ + if (n < 1 || a->rn == 15) { unallocated_encoding(s); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDM_a32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 1 is UNPREDICTABLE */ - return do_ldm(s, a, 1); + return do_ldm(s, a); } static bool trans_LDM_t32(DisasContext *s, arg_ldst_block *a) @@ -XXX,XX +XXX,XX @@ static bool trans_LDM_t32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 2 is UNPREDICTABLE */ - return do_ldm(s, a, 2); + return do_ldm(s, a); } static bool trans_LDM_t16(DisasContext *s, arg_ldst_block *a) { /* Writeback is conditional on the base register not being loaded. */ a->w = !(a->list & (1 << a->rn)); - /* BitCount(list) < 1 is UNPREDICTABLE */ - return do_ldm(s, a, 1); + return do_ldm(s, a); } static bool trans_CLRM(DisasContext *s, arg_CLRM *a) -- 2.34.1 Update the SMMUv3 ID register bit field definitions to the set in the most recent specification (IHI0700 F.a). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-2-peter.maydell@linaro.org --- hw/arm/smmuv3-internal.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(IDR0, 0x0) FIELD(IDR0, S1P, 1 , 1) FIELD(IDR0, TTF, 2 , 2) FIELD(IDR0, COHACC, 4 , 1) + FIELD(IDR0, BTM, 5 , 1) + FIELD(IDR0, HTTU, 6 , 2) + FIELD(IDR0, DORMHINT, 8 , 1) + FIELD(IDR0, HYP, 9 , 1) + FIELD(IDR0, ATS, 10, 1) + FIELD(IDR0, NS1ATS, 11, 1) FIELD(IDR0, ASID16, 12, 1) + FIELD(IDR0, MSI, 13, 1) + FIELD(IDR0, SEV, 14, 1) + FIELD(IDR0, ATOS, 15, 1) + FIELD(IDR0, PRI, 16, 1) + FIELD(IDR0, VMW, 17, 1) FIELD(IDR0, VMID16, 18, 1) + FIELD(IDR0, CD2L, 19, 1) + FIELD(IDR0, VATOS, 20, 1) FIELD(IDR0, TTENDIAN, 21, 2) + FIELD(IDR0, ATSRECERR, 23, 1) FIELD(IDR0, STALL_MODEL, 24, 2) FIELD(IDR0, TERM_MODEL, 26, 1) FIELD(IDR0, STLEVEL, 27, 2) + FIELD(IDR0, RME_IMPL, 30, 1) REG32(IDR1, 0x4) FIELD(IDR1, SIDSIZE, 0 , 6) + FIELD(IDR1, SSIDSIZE, 6 , 5) + FIELD(IDR1, PRIQS, 11, 5) FIELD(IDR1, EVENTQS, 16, 5) FIELD(IDR1, CMDQS, 21, 5) + FIELD(IDR1, ATTR_PERMS_OVR, 26, 1) + FIELD(IDR1, ATTR_TYPES_OVR, 27, 1) + FIELD(IDR1, REL, 28, 1) + FIELD(IDR1, QUEUES_PRESET, 29, 1) + FIELD(IDR1, TABLES_PRESET, 30, 1) + FIELD(IDR1, ECMDQ, 31, 1) #define SMMU_IDR1_SIDSIZE 16 #define SMMU_CMDQS 19 #define SMMU_EVENTQS 19 REG32(IDR2, 0x8) + FIELD(IDR2, BA_VATOS, 0, 10) + REG32(IDR3, 0xc) FIELD(IDR3, HAD, 2, 1); + FIELD(IDR3, PBHA, 3, 1); + FIELD(IDR3, XNX, 4, 1); + FIELD(IDR3, PPS, 5, 1); + FIELD(IDR3, MPAM, 7, 1); + FIELD(IDR3, FWB, 8, 1); + FIELD(IDR3, STT, 9, 1); FIELD(IDR3, RIL, 10, 1); FIELD(IDR3, BBML, 11, 2); + FIELD(IDR3, E0PD, 13, 1); + FIELD(IDR3, PTWNNC, 14, 1); + FIELD(IDR3, DPT, 15, 1); + REG32(IDR4, 0x10) + REG32(IDR5, 0x14) FIELD(IDR5, OAS, 0, 3); FIELD(IDR5, GRAN4K, 4, 1); FIELD(IDR5, GRAN16K, 5, 1); FIELD(IDR5, GRAN64K, 6, 1); + FIELD(IDR5, VAX, 10, 2); + FIELD(IDR5, STALL_MAX, 16, 16); #define SMMU_IDR5_OAS 4 -- 2.34.1 In smmuv3_init_regs() when we set the various bits in the ID registers, we do this almost in order of the fields in the registers, but not quite. Move the initialization of SMMU_IDR3.RIL and SMMU_IDR5.OAS into their correct places. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-3-peter.maydell@linaro.org --- hw/arm/smmuv3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->idr[1] = FIELD_DP32(s->idr[1], IDR1, EVENTQS, SMMU_EVENTQS); s->idr[1] = FIELD_DP32(s->idr[1], IDR1, CMDQS, SMMU_CMDQS); - s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, HAD, 1); + s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, BBML, 2); + s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ /* 4K, 16K and 64K granule support */ s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN4K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN16K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN64K, 1); - s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ s->cmdq.base = deposit64(s->cmdq.base, 0, 5, SMMU_CMDQS); s->cmdq.prod = 0; -- 2.34.1 The SMMUv3.1-XNX feature is mandatory for an SMMUv3.1 if S2P is supported, so we should theoretically have implemented it as part of the recent S2P work. Fortunately, for us the implementation is a no-op. This feature is about interpretation of the stage 2 page table descriptor XN bits, which control execute permissions. For QEMU, the permission bits passed to an IOMMU (via MemTxAttrs and IOMMUAccessFlags) only indicate read and write; we do not distinguish data reads from instruction reads outside the CPU proper. In the SMMU architecture's terms, our interconnect between the client device and the SMMU doesn't have the ability to convey the INST attribute, and we therefore use the default value of "data" for this attribute. We also do not support the bits in the Stream Table Entry that can override the on-the-bus transaction attribute permissions (we do not set SMMU_IDR1.ATTR_PERMS_OVR=1). These two things together mean that for our implementation, it never has to deal with transactions with the INST attribute, and so it can correctly ignore the XN bits entirely. So we already implement FEAT_XNX's "XN field is now 2 bits, not 1" behaviour to the extent that we need to. Advertise the presence of the feature in SMMU_IDR3.XNX. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-4-peter.maydell@linaro.org --- hw/arm/smmuv3.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->idr[1] = FIELD_DP32(s->idr[1], IDR1, CMDQS, SMMU_CMDQS); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, HAD, 1); + if (FIELD_EX32(s->idr[0], IDR0, S2P)) { + /* XNX is a stage-2-specific feature */ + s->idr[3] = FIELD_DP32(s->idr[3], IDR3, XNX, 1); + } s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, BBML, 2); -- 2.34.1 FEAT_HPMN0 is a small feature which defines that it is valid for MDCR_EL2.HPMN to be set to 0, meaning "no PMU event counters provided to an EL1 guest" (previously this setting was reserved). QEMU's implementation almost gets HPMN == 0 right, but we need to fix one check in pmevcntr_is_64_bit(). That is enough for us to advertise the feature in the 'max' CPU. (We don't need to make the behaviour conditional on feature presence, because the FEAT_HPMN0 behaviour is within the range of permitted UNPREDICTABLE behaviour for a non-FEAT_HPMN0 implementation.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230921185445.3339214-1-peter.maydell@linaro.org --- docs/system/arm/emulation.rst | 1 + target/arm/helper.c | 2 +- target/arm/tcg/cpu32.c | 4 ++++ target/arm/tcg/cpu64.c | 1 + 4 files changed, 7 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) - FEAT_HPDS2 (Translation table page-based hardware attributes) +- FEAT_HPMN0 (Setting of MDCR_EL2.HPMN to zero) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool pmevcntr_is_64_bit(CPUARMState *env, int counter) bool hlp = env->cp15.mdcr_el2 & MDCR_HLP; int hpmn = env->cp15.mdcr_el2 & MDCR_HPMN; - if (hpmn != 0 && counter >= hpmn) { + if (counter >= hpmn) { return hlp; } } diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) t = FIELD_DP32(t, ID_DFR0, COPSDBG, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 6); /* FEAT_PMUv3p5 */ cpu->isar.id_dfr0 = t; + + t = cpu->isar.id_dfr1; + t = FIELD_DP32(t, ID_DFR1, HPMN0, 1); /* FEAT_HPMN0 */ + cpu->isar.id_dfr1 = t; } /* CPU models. These are not needed for the AArch64 linux-user build. */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = cpu->isar.id_aa64dfr0; t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 6); /* FEAT_PMUv3p5 */ + t = FIELD_DP64(t, ID_AA64DFR0, HPMN0, 1); /* FEAT_HPMN0 */ cpu->isar.id_aa64dfr0 = t; t = cpu->isar.id_aa64smfr0; -- 2.34.1 The include of hw/arm/virt.h in kvm64.c is unnecessary and also a layering violation since the generic KVM code shouldn't need to know anything about board-specifics. The include line is an accidental leftover from commit 15613357ba53a4763, where we cleaned up the code to not depend on virt board internals but forgot to also remove the now-redundant include line. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230925110429.3917202-1-peter.maydell@linaro.org --- target/arm/kvm64.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ #include "internals.h" #include "hw/acpi/acpi.h" #include "hw/acpi/ghes.h" -#include "hw/arm/virt.h" static bool have_guest_debug; -- 2.34.1 The hw/arm/boot.h include in common-semi-target.h is not actually needed, and it's a bit odd because it pulls a hw/arm header into a target/arm file. This include was originally needed because the semihosting code used the arm_boot_info struct to get the base address of the RAM in system emulation, to use in a (bad) heuristic for the return values for the SYS_HEAPINFO semihosting call. We've since overhauled how we calculate the HEAPINFO values in system emulation, and the code no longer uses the arm_boot_info struct. Remove the now-redundant include line, and instead directly include the cpu-qom.h header that we were previously getting via boot.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230925112219.3919261-1-peter.maydell@linaro.org --- target/arm/common-semi-target.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/target/arm/common-semi-target.h b/target/arm/common-semi-target.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/common-semi-target.h +++ b/target/arm/common-semi-target.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_COMMON_SEMI_TARGET_H #define TARGET_ARM_COMMON_SEMI_TARGET_H -#ifndef CONFIG_USER_ONLY -#include "hw/arm/boot.h" -#endif +#include "target/arm/cpu-qom.h" static inline target_ulong common_semi_arg(CPUState *cs, int argno) { -- 2.34.1 The code for powering on a CPU in arm-powerctl.c has two separate use cases: * emulation of a real hardware power controller * emulation of firmware interfaces (primarily PSCI) with CPU on/off APIs For the first case, we only need to reset the CPU and set its starting PC and X0. For the second case, because we're emulating the firmware we need to ensure that it's in the state that the firmware provides. In particular, when we reset to a lower EL than the highest one we are emulating, we need to put the CPU into a state that permits correct running at that lower EL. We already do a little of this in arm-powerctl.c (for instance we set SCR_HCE to enable the HVC insn) but we don't do enough of it. This means that in the case where we are emulating EL3 but also providing emulated PSCI the guest will crash when a secondary core tries to use a feature that needs an SCR_EL3 bit to be set, such as MTE or PAuth. The hw/arm/boot.c code also has to support this "start guest code in an EL that's lower than the highest emulated EL" case in order to do direct guest kernel booting; it has all the necessary initialization code to set the SCR_EL3 bits. Pull the relevant boot.c code out into a separate function so we can share it between there and arm-powerctl.c. This refactoring has a few code changes that look like they might be behaviour changes but aren't: * if info->secure_boot is false and info->secure_board_setup is true, then the old code would start the first CPU in Hyp mode but without changing SCR.NS and NSACR.{CP11,CP10}. This was wrong behaviour because there's no such thing as Secure Hyp mode. The new code will leave the CPU in SVC. (There is no board which sets secure_boot to false and secure_board_setup to true, so this isn't a behaviour change for any of our boards.) * we don't explicitly clear SCR.NS when arm-powerctl.c does a CPU-on to EL3. This was a no-op because CPU reset will reset to NS == 0. And some real behaviour changes: * we no longer set HCR_EL2.RW when booting into EL2: the guest can and should do that themselves before dropping into their EL1 code. (arm-powerctl and boot did this differently; I opted to use the logic from arm-powerctl, which only sets HCR_EL2.RW when it's directly starting the guest in EL1, because it's more correct, and I don't expect guests to be accidentally depending on our having set the RW bit for them.) * if we are booting a CPU into AArch32 Secure SVC then we won't set SCR.HCE any more. This affects only the vexpress-a15 and raspi2b machine types. Guests booting in this case will either: - be able to set SCR.HCE themselves as part of moving from Secure SVC into NS Hyp mode - will move from Secure SVC to NS SVC, and won't care about behaviour of the HVC insn - will stay in Secure SVC, and won't care about HVC * on an arm-powerctl CPU-on we will now set the SCR bits for pauth/mte/sve/sme/hcx/fgt features The first two of these are very minor and I don't expect guest code to trip over them, so I didn't judge it worth convoluting the code in an attempt to keep exactly the same boot.c behaviour. The third change fixes issue 1899. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1899 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230926155619.4028618-1-peter.maydell@linaro.org --- target/arm/cpu.h | 22 +++++++++ hw/arm/boot.c | 95 ++++++++++----------------------------- target/arm/arm-powerctl.c | 53 +--------------------- target/arm/cpu.c | 95 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 141 insertions(+), 124 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs, int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs, int cpuid, DumpState *s); +/** + * arm_emulate_firmware_reset: Emulate firmware CPU reset handling + * @cpu: CPU (which must have been freshly reset) + * @target_el: exception level to put the CPU into + * @secure: whether to put the CPU in secure state + * + * When QEMU is directly running a guest kernel at a lower level than + * EL3 it implicitly emulates some aspects of the guest firmware. + * This includes that on reset we need to configure the parts of the + * CPU corresponding to EL3 so that the real guest code can run at its + * lower exception level. This function does that post-reset CPU setup, + * for when we do direct boot of a guest kernel, and for when we + * emulate PSCI and similar firmware interfaces starting a CPU at a + * lower exception level. + * + * @target_el must be an EL implemented by the CPU between 1 and 3. + * We do not support dropping into a Secure EL other than 3. + * + * It is the responsibility of the caller to call arm_rebuild_hflags(). + */ +void arm_emulate_firmware_reset(CPUState *cpustate, int target_el); + #ifdef TARGET_AARCH64 int aarch64_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) cpu_set_pc(cs, entry); } else { - /* If we are booting Linux then we need to check whether we are - * booting into secure or non-secure state and adjust the state - * accordingly. Out of reset, ARM is defined to be in secure state - * (SCR.NS = 0), we change that here if non-secure boot has been - * requested. + /* + * If we are booting Linux then we might need to do so at: + * - AArch64 NS EL2 or NS EL1 + * - AArch32 Secure SVC (EL3) + * - AArch32 NS Hyp (EL2) + * - AArch32 NS SVC (EL1) + * Configure the CPU in the way boot firmware would do to + * drop us down to the appropriate level. */ - if (arm_feature(env, ARM_FEATURE_EL3)) { - /* AArch64 is defined to come out of reset into EL3 if enabled. - * If we are booting Linux then we need to adjust our EL as - * Linux expects us to be in EL2 or EL1. AArch32 resets into - * SVC, which Linux expects, so no privilege/exception level to - * adjust. - */ - if (env->aarch64) { - env->cp15.scr_el3 |= SCR_RW; - if (arm_feature(env, ARM_FEATURE_EL2)) { - env->cp15.hcr_el2 |= HCR_RW; - env->pstate = PSTATE_MODE_EL2h; - } else { - env->pstate = PSTATE_MODE_EL1h; - } - if (cpu_isar_feature(aa64_pauth, cpu)) { - env->cp15.scr_el3 |= SCR_API | SCR_APK; - } - if (cpu_isar_feature(aa64_mte, cpu)) { - env->cp15.scr_el3 |= SCR_ATA; - } - if (cpu_isar_feature(aa64_sve, cpu)) { - env->cp15.cptr_el[3] |= R_CPTR_EL3_EZ_MASK; - env->vfp.zcr_el[3] = 0xf; - } - if (cpu_isar_feature(aa64_sme, cpu)) { - env->cp15.cptr_el[3] |= R_CPTR_EL3_ESM_MASK; - env->cp15.scr_el3 |= SCR_ENTP2; - env->vfp.smcr_el[3] = 0xf; - } - if (cpu_isar_feature(aa64_hcx, cpu)) { - env->cp15.scr_el3 |= SCR_HXEN; - } - if (cpu_isar_feature(aa64_fgt, cpu)) { - env->cp15.scr_el3 |= SCR_FGTEN; - } + int target_el = arm_feature(env, ARM_FEATURE_EL2) ? 2 : 1; - /* AArch64 kernels never boot in secure mode */ - assert(!info->secure_boot); - /* This hook is only supported for AArch32 currently: - * bootloader_aarch64[] will not call the hook, and - * the code above has already dropped us into EL2 or EL1. - */ - assert(!info->secure_board_setup); - } - - if (arm_feature(env, ARM_FEATURE_EL2)) { - /* If we have EL2 then Linux expects the HVC insn to work */ - env->cp15.scr_el3 |= SCR_HCE; - } - - /* Set to non-secure if not a secure boot */ - if (!info->secure_boot && - (cs != first_cpu || !info->secure_board_setup)) { - /* Linux expects non-secure state */ - env->cp15.scr_el3 |= SCR_NS; - /* Set NSACR.{CP11,CP10} so NS can access the FPU */ - env->cp15.nsacr |= 3 << 10; - } - } - - if (!env->aarch64 && !info->secure_boot && - arm_feature(env, ARM_FEATURE_EL2)) { + if (env->aarch64) { /* - * This is an AArch32 boot not to Secure state, and - * we have Hyp mode available, so boot the kernel into - * Hyp mode. This is not how the CPU comes out of reset, - * so we need to manually put it there. + * AArch64 kernels never boot in secure mode, and we don't + * support the secure_board_setup hook for AArch64. */ - cpsr_write(env, ARM_CPU_MODE_HYP, CPSR_M, CPSRWriteRaw); + assert(!info->secure_boot); + assert(!info->secure_board_setup); + } else { + if (arm_feature(env, ARM_FEATURE_EL3) && + (info->secure_boot || + (info->secure_board_setup && cs == first_cpu))) { + /* Start this CPU in Secure SVC */ + target_el = 3; + } } + arm_emulate_firmware_reset(cs, target_el); + if (cs == first_cpu) { AddressSpace *as = arm_boot_address_space(cpu, info); diff --git a/target/arm/arm-powerctl.c b/target/arm/arm-powerctl.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-powerctl.c +++ b/target/arm/arm-powerctl.c @@ -XXX,XX +XXX,XX @@ static void arm_set_cpu_on_async_work(CPUState *target_cpu_state, /* Initialize the cpu we are turning on */ cpu_reset(target_cpu_state); + arm_emulate_firmware_reset(target_cpu_state, info->target_el); target_cpu_state->halted = 0; - if (info->target_aa64) { - if ((info->target_el < 3) && arm_feature(&target_cpu->env, - ARM_FEATURE_EL3)) { - /* - * As target mode is AArch64, we need to set lower - * exception level (the requested level 2) to AArch64 - */ - target_cpu->env.cp15.scr_el3 |= SCR_RW; - } - - if ((info->target_el < 2) && arm_feature(&target_cpu->env, - ARM_FEATURE_EL2)) { - /* - * As target mode is AArch64, we need to set lower - * exception level (the requested level 1) to AArch64 - */ - target_cpu->env.cp15.hcr_el2 |= HCR_RW; - } - - target_cpu->env.pstate = aarch64_pstate_mode(info->target_el, true); - } else { - /* We are requested to boot in AArch32 mode */ - static const uint32_t mode_for_el[] = { 0, - ARM_CPU_MODE_SVC, - ARM_CPU_MODE_HYP, - ARM_CPU_MODE_SVC }; - - cpsr_write(&target_cpu->env, mode_for_el[info->target_el], CPSR_M, - CPSRWriteRaw); - } - - if (info->target_el == 3) { - /* Processor is in secure mode */ - target_cpu->env.cp15.scr_el3 &= ~SCR_NS; - } else { - /* Processor is not in secure mode */ - target_cpu->env.cp15.scr_el3 |= SCR_NS; - - /* Set NSACR.{CP11,CP10} so NS can access the FPU */ - target_cpu->env.cp15.nsacr |= 3 << 10; - - /* - * If QEMU is providing the equivalent of EL3 firmware, then we need - * to make sure a CPU targeting EL2 comes out of reset with a - * functional HVC insn. - */ - if (arm_feature(&target_cpu->env, ARM_FEATURE_EL3) - && info->target_el == 2) { - target_cpu->env.cp15.scr_el3 |= SCR_HCE; - } - } - /* We check if the started CPU is now at the correct level */ assert(info->target_el == arm_current_el(&target_cpu->env)); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) } } +void arm_emulate_firmware_reset(CPUState *cpustate, int target_el) +{ + ARMCPU *cpu = ARM_CPU(cpustate); + CPUARMState *env = &cpu->env; + bool have_el3 = arm_feature(env, ARM_FEATURE_EL3); + bool have_el2 = arm_feature(env, ARM_FEATURE_EL2); + + /* + * Check we have the EL we're aiming for. If that is the + * highest implemented EL, then cpu_reset has already done + * all the work. + */ + switch (target_el) { + case 3: + assert(have_el3); + return; + case 2: + assert(have_el2); + if (!have_el3) { + return; + } + break; + case 1: + if (!have_el3 && !have_el2) { + return; + } + break; + default: + g_assert_not_reached(); + } + + if (have_el3) { + /* + * Set the EL3 state so code can run at EL2. This should match + * the requirements set by Linux in its booting spec. + */ + if (env->aarch64) { + env->cp15.scr_el3 |= SCR_RW; + if (cpu_isar_feature(aa64_pauth, cpu)) { + env->cp15.scr_el3 |= SCR_API | SCR_APK; + } + if (cpu_isar_feature(aa64_mte, cpu)) { + env->cp15.scr_el3 |= SCR_ATA; + } + if (cpu_isar_feature(aa64_sve, cpu)) { + env->cp15.cptr_el[3] |= R_CPTR_EL3_EZ_MASK; + env->vfp.zcr_el[3] = 0xf; + } + if (cpu_isar_feature(aa64_sme, cpu)) { + env->cp15.cptr_el[3] |= R_CPTR_EL3_ESM_MASK; + env->cp15.scr_el3 |= SCR_ENTP2; + env->vfp.smcr_el[3] = 0xf; + } + if (cpu_isar_feature(aa64_hcx, cpu)) { + env->cp15.scr_el3 |= SCR_HXEN; + } + if (cpu_isar_feature(aa64_fgt, cpu)) { + env->cp15.scr_el3 |= SCR_FGTEN; + } + } + + if (target_el == 2) { + /* If the guest is at EL2 then Linux expects the HVC insn to work */ + env->cp15.scr_el3 |= SCR_HCE; + } + + /* Put CPU into non-secure state */ + env->cp15.scr_el3 |= SCR_NS; + /* Set NSACR.{CP11,CP10} so NS can access the FPU */ + env->cp15.nsacr |= 3 << 10; + } + + if (have_el2 && target_el < 2) { + /* Set EL2 state so code can run at EL1. */ + if (env->aarch64) { + env->cp15.hcr_el2 |= HCR_RW; + } + } + + /* Set the CPU to the desired state */ + if (env->aarch64) { + env->pstate = aarch64_pstate_mode(target_el, true); + } else { + static const uint32_t mode_for_el[] = { + 0, + ARM_CPU_MODE_SVC, + ARM_CPU_MODE_HYP, + ARM_CPU_MODE_SVC, + }; + + cpsr_write(env, mode_for_el[target_el], CPSR_M, CPSRWriteRaw); + } +} + + #if defined(CONFIG_TCG) && !defined(CONFIG_USER_ONLY) static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, -- 2.34.1 From: Chris Rauer <crauer@google.com> The counter register is only 24-bits and counts down. If the timer is running but the qtimer to reset it hasn't fired off yet, there is a chance the regster read can return an invalid result. Signed-off-by: Chris Rauer <crauer@google.com> Message-id: 20230922181411.2697135-1-crauer@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/npcm7xx_timer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count) /* Convert a time interval in nanoseconds to a timer cycle count. */ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) { + if (ns < 0) { + return 0; + } return clock_ns_to_ticks(t->ctrl->clock, ns) / npcm7xx_tcsr_prescaler(t->tcsr); } -- 2.34.1 From: Suraj Shirvankar <surajshirvankar@gmail.com> QEMU coding style uses the glib memory allocation APIs, not the raw libc malloc/free. Switch the allocation and free calls in elf2dmp to use these functions (dropping the now-unneeded checks for failure). Signed-off-by: Suraj Shirvankar <surajshirvankar@gmail.com> Message-id: 169753938460.23804.11418813007617535750-1@git.sr.ht [PMM: also remove NULL checks from g_malloc() calls; beef up commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/addrspace.c | 7 ++----- contrib/elf2dmp/main.c | 9 +++------ contrib/elf2dmp/pdb.c | 19 ++++++++----------- contrib/elf2dmp/qemu_elf.c | 7 ++----- 4 files changed, 15 insertions(+), 27 deletions(-) diff --git a/contrib/elf2dmp/addrspace.c b/contrib/elf2dmp/addrspace.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/addrspace.c +++ b/contrib/elf2dmp/addrspace.c @@ -XXX,XX +XXX,XX @@ int pa_space_create(struct pa_space *ps, QEMU_Elf *qemu_elf) } } - ps->block = malloc(sizeof(*ps->block) * ps->block_nr); - if (!ps->block) { - return 1; - } + ps->block = g_new(struct pa_block, ps->block_nr); for (i = 0; i < phdr_nr; i++) { if (phdr[i].p_type == PT_LOAD) { @@ -XXX,XX +XXX,XX @@ int pa_space_create(struct pa_space *ps, QEMU_Elf *qemu_elf) void pa_space_destroy(struct pa_space *ps) { ps->block_nr = 0; - free(ps->block); + g_free(ps->block); } void va_space_set_dtb(struct va_space *vs, uint64_t dtb) diff --git a/contrib/elf2dmp/main.c b/contrib/elf2dmp/main.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/main.c +++ b/contrib/elf2dmp/main.c @@ -XXX,XX +XXX,XX @@ static KDDEBUGGER_DATA64 *get_kdbg(uint64_t KernBase, struct pdb_reader *pdb, } } - kdbg = malloc(kdbg_hdr.Size); - if (!kdbg) { - return NULL; - } + kdbg = g_malloc(kdbg_hdr.Size); if (va_space_rw(vs, KdDebuggerDataBlock, kdbg, kdbg_hdr.Size, 0)) { eprintf("Failed to extract entire KDBG\n"); - free(kdbg); + g_free(kdbg); return NULL; } @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) } out_kdbg: - free(kdbg); + g_free(kdbg); out_pdb: pdb_exit(&pdb); out_pdb_file: diff --git a/contrib/elf2dmp/pdb.c b/contrib/elf2dmp/pdb.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/pdb.c +++ b/contrib/elf2dmp/pdb.c @@ -XXX,XX +XXX,XX @@ uint64_t pdb_resolve(uint64_t img_base, struct pdb_reader *r, const char *name) static void pdb_reader_ds_exit(struct pdb_reader *r) { - free(r->ds.toc); + g_free(r->ds.toc); } static void pdb_exit_symbols(struct pdb_reader *r) { - free(r->modimage); - free(r->symbols); + g_free(r->modimage); + g_free(r->symbols); } static void pdb_exit_segments(struct pdb_reader *r) { - free(r->segs); + g_free(r->segs); } static void *pdb_ds_read(const PDB_DS_HEADER *header, @@ -XXX,XX +XXX,XX @@ static void *pdb_ds_read(const PDB_DS_HEADER *header, nBlocks = (size + header->block_size - 1) / header->block_size; - buffer = malloc(nBlocks * header->block_size); - if (!buffer) { - return NULL; - } + buffer = g_malloc(nBlocks * header->block_size); for (i = 0; i < nBlocks; i++) { memcpy(buffer + i * header->block_size, (const char *)header + @@ -XXX,XX +XXX,XX @@ static int pdb_init_symbols(struct pdb_reader *r) return 0; out_symbols: - free(symbols); + g_free(symbols); return err; } @@ -XXX,XX +XXX,XX @@ static int pdb_reader_init(struct pdb_reader *r, void *data) out_sym: pdb_exit_symbols(r); out_root: - free(r->ds.root); + g_free(r->ds.root); out_ds: pdb_reader_ds_exit(r); @@ -XXX,XX +XXX,XX @@ static void pdb_reader_exit(struct pdb_reader *r) { pdb_exit_segments(r); pdb_exit_symbols(r); - free(r->ds.root); + g_free(r->ds.root); pdb_reader_ds_exit(r); } diff --git a/contrib/elf2dmp/qemu_elf.c b/contrib/elf2dmp/qemu_elf.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/qemu_elf.c +++ b/contrib/elf2dmp/qemu_elf.c @@ -XXX,XX +XXX,XX @@ static int init_states(QEMU_Elf *qe) printf("%zu CPU states has been found\n", cpu_nr); - qe->state = malloc(sizeof(*qe->state) * cpu_nr); - if (!qe->state) { - return 1; - } + qe->state = g_new(QEMUCPUState*, cpu_nr); cpu_nr = 0; @@ -XXX,XX +XXX,XX @@ static int init_states(QEMU_Elf *qe) static void exit_states(QEMU_Elf *qe) { - free(qe->state); + g_free(qe->state); } static bool check_ehdr(QEMU_Elf *qe) -- 2.34.1