The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 Hi; this mostly contains the first slice of A64 decodetree patches, plus some other minor pieces. It also has the enablement of MTE for KVM guests. thanks -- PMM The following changes since commit d27e7c359330ba7020bdbed7ed2316cb4cf6ffc1: qapi/parser: Drop two bad type hints for now (2023-05-17 10:18:33 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230518 for you to fetch changes up to 91608e2a44f36e79cb83f863b8a7bb57d2c98061: docs: Convert u2f.txt to rST (2023-05-18 11:40:32 +0100) ---------------------------------------------------------------- target-arm queue: * Fix vd == vm overlap in sve_ldff1_z * Add support for MTE with KVM guests * Add RAZ/WI handling for DBGDTR[TX|RX] * Start of conversion of A64 decoder to decodetree * Saturate L2CTLR_EL1 core count field rather than overflowing * vexpress: Avoid trivial memory leak of 'flashalias' * sbsa-ref: switch default cpu core to Neoverse-N1 * sbsa-ref: use Bochs graphics card instead of VGA * MAINTAINERS: Add Marcin Juszkiewicz to sbsa-ref reviewer list * docs: Convert u2f.txt to rST ---------------------------------------------------------------- Alex Bennée (1): target/arm: add RAZ/WI handling for DBGDTR[TX|RX] Cornelia Huck (1): arm/kvm: add support for MTE Marcin Juszkiewicz (3): sbsa-ref: switch default cpu core to Neoverse-N1 Maintainers: add myself as reviewer for sbsa-ref sbsa-ref: use Bochs graphics card instead of VGA Peter Maydell (14): target/arm: Create decodetree skeleton for A64 target/arm: Pull calls to disas_sve() and disas_sme() out of legacy decoder target/arm: Convert Extract instructions to decodetree target/arm: Convert unconditional branch immediate to decodetree target/arm: Convert CBZ, CBNZ to decodetree target/arm: Convert TBZ, TBNZ to decodetree target/arm: Convert conditional branch insns to decodetree target/arm: Convert BR, BLR, RET to decodetree target/arm: Convert BRA[AB]Z, BLR[AB]Z, RETA[AB] to decodetree target/arm: Convert BRAA, BRAB, BLRAA, BLRAB to decodetree target/arm: Convert ERET, ERETAA, ERETAB to decodetree target/arm: Saturate L2CTLR_EL1 core count field rather than overflowing hw/arm/vexpress: Avoid trivial memory leak of 'flashalias' docs: Convert u2f.txt to rST Richard Henderson (10): target/arm: Fix vd == vm overlap in sve_ldff1_z target/arm: Split out disas_a64_legacy target/arm: Convert PC-rel addressing to decodetree target/arm: Split gen_add_CC and gen_sub_CC target/arm: Convert Add/subtract (immediate) to decodetree target/arm: Convert Add/subtract (immediate with tags) to decodetree target/arm: Replace bitmask64 with MAKE_64BIT_MASK target/arm: Convert Logical (immediate) to decodetree target/arm: Convert Move wide (immediate) to decodetree target/arm: Convert Bitfield to decodetree MAINTAINERS | 1 + docs/system/device-emulation.rst | 1 + docs/system/devices/usb-u2f.rst | 93 +++ docs/system/devices/usb.rst | 2 +- docs/u2f.txt | 110 ---- target/arm/cpu.h | 4 + target/arm/kvm_arm.h | 19 + target/arm/tcg/translate.h | 5 + target/arm/tcg/a64.decode | 152 +++++ hw/arm/sbsa-ref.c | 4 +- hw/arm/vexpress.c | 40 +- hw/arm/virt.c | 73 ++- target/arm/cortex-regs.c | 11 +- target/arm/cpu.c | 9 +- target/arm/debug_helper.c | 11 +- target/arm/kvm.c | 35 + target/arm/kvm64.c | 5 + target/arm/tcg/sve_helper.c | 6 + target/arm/tcg/translate-a64.c | 1321 ++++++++++++++++---------------------- target/arm/tcg/meson.build | 1 + 20 files changed, 979 insertions(+), 924 deletions(-) create mode 100644 docs/system/devices/usb-u2f.rst delete mode 100644 docs/u2f.txt create mode 100644 target/arm/tcg/a64.decode From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> The world outside moves to newer and newer cpu cores. Let move SBSA Reference Platform to something newer as well. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230506183417.1360427-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data) mc->init = sbsa_ref_init; mc->desc = "QEMU 'SBSA Reference' ARM Virtual Machine"; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a57"); + mc->default_cpu_type = ARM_CPU_TYPE_NAME("neoverse-n1"); mc->max_cpus = 512; mc->pci_allow_0_address = true; mc->minimum_page_bits = 12; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> If vd == vm, copy vm to scratch, so that we can pre-zero the output and still access the gather indicies. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1612 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230504104232.1877774-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/sve_helper.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sve_helper.c +++ b/target/arm/tcg/sve_helper.c @@ -XXX,XX +XXX,XX @@ void sve_ldff1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm, intptr_t reg_off; SVEHostPage info; target_ulong addr, in_page; + ARMVectorReg scratch; /* Skip to the first true predicate. */ reg_off = find_next_active(vg, 0, reg_max, esz); @@ -XXX,XX +XXX,XX @@ void sve_ldff1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm, return; } + /* Protect against overlap between vd and vm. */ + if (unlikely(vd == vm)) { + vm = memcpy(&scratch, vm, reg_max); + } + /* * Probe the first element, allowing faults. */ -- 2.34.1 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> At Linaro I work on sbsa-ref, know direction it goes. May not get code details each time. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230515143753.365591-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> R: Leif Lindholm <quic_llindhol@quicinc.com> +R: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/sbsa-ref.c -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Extend the 'mte' property for the virt machine to cover KVM as well. For KVM, we don't allocate tag memory, but instead enable the capability. If MTE has been enabled, we need to disable migration, as we do not yet have a way to migrate the tags as well. Therefore, MTE will stay off with KVM unless requested explicitly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230428095533.21747-2-cohuck@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 4 +++ target/arm/kvm_arm.h | 19 ++++++++++++ hw/arm/virt.c | 73 +++++++++++++++++++++++++------------------- target/arm/cpu.c | 9 +++--- target/arm/kvm.c | 35 +++++++++++++++++++++ target/arm/kvm64.c | 5 +++ 6 files changed, 109 insertions(+), 36 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { */ uint32_t psci_conduit; + /* CPU has Memory Tag Extension */ + bool has_mte; + /* For v8M, initial value of the Secure VTOR */ uint32_t init_svtor; /* For v8M, initial value of the Non-secure VTOR */ @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool prop_pauth; bool prop_pauth_impdef; bool prop_lpa2; + OnOffAuto prop_mte; /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint32_t dcz_blocksize; diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ bool kvm_arm_pmu_supported(void); */ bool kvm_arm_sve_supported(void); +/** + * kvm_arm_mte_supported: + * + * Returns: true if KVM can enable MTE, and false otherwise. + */ +bool kvm_arm_mte_supported(void); + /** * kvm_arm_get_max_vm_ipa_size: * @ms: Machine state handle @@ -XXX,XX +XXX,XX @@ void kvm_arm_pvtime_init(CPUState *cs, uint64_t ipa); int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level); +void kvm_arm_enable_mte(Object *cpuobj, Error **errp); + #else /* @@ -XXX,XX +XXX,XX @@ static inline bool kvm_arm_steal_time_supported(void) return false; } +static inline bool kvm_arm_mte_supported(void) +{ + return false; +} + /* * These functions should never actually be called without KVM support. */ @@ -XXX,XX +XXX,XX @@ static inline uint32_t kvm_arm_sve_get_vls(CPUState *cs) g_assert_not_reached(); } +static inline void kvm_arm_enable_mte(Object *cpuobj, Error **errp) +{ + g_assert_not_reached(); +} + #endif static inline const char *gic_class_name(void) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } - if (vms->mte && (kvm_enabled() || hvf_enabled())) { + if (vms->mte && hvf_enabled()) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", current_accel_name()); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) } if (vms->mte) { - /* Create the memory region only once, but link to all cpus. */ - if (!tag_sysmem) { - /* - * The property exists only if MemTag is supported. - * If it is, we must allocate the ram to back that up. - */ - if (!object_property_find(cpuobj, "tag-memory")) { - error_report("MTE requested, but not supported " - "by the guest CPU"); + if (tcg_enabled()) { + /* Create the memory region only once, but link to all cpus. */ + if (!tag_sysmem) { + /* + * The property exists only if MemTag is supported. + * If it is, we must allocate the ram to back that up. + */ + if (!object_property_find(cpuobj, "tag-memory")) { + error_report("MTE requested, but not supported " + "by the guest CPU"); + exit(1); + } + + tag_sysmem = g_new(MemoryRegion, 1); + memory_region_init(tag_sysmem, OBJECT(machine), + "tag-memory", UINT64_MAX / 32); + + if (vms->secure) { + secure_tag_sysmem = g_new(MemoryRegion, 1); + memory_region_init(secure_tag_sysmem, OBJECT(machine), + "secure-tag-memory", + UINT64_MAX / 32); + + /* As with ram, secure-tag takes precedence over tag. */ + memory_region_add_subregion_overlap(secure_tag_sysmem, + 0, tag_sysmem, -1); + } + } + + object_property_set_link(cpuobj, "tag-memory", + OBJECT(tag_sysmem), &error_abort); + if (vms->secure) { + object_property_set_link(cpuobj, "secure-tag-memory", + OBJECT(secure_tag_sysmem), + &error_abort); + } + } else if (kvm_enabled()) { + if (!kvm_arm_mte_supported()) { + error_report("MTE requested, but not supported by KVM"); exit(1); } - - tag_sysmem = g_new(MemoryRegion, 1); - memory_region_init(tag_sysmem, OBJECT(machine), - "tag-memory", UINT64_MAX / 32); - - if (vms->secure) { - secure_tag_sysmem = g_new(MemoryRegion, 1); - memory_region_init(secure_tag_sysmem, OBJECT(machine), - "secure-tag-memory", UINT64_MAX / 32); - - /* As with ram, secure-tag takes precedence over tag. */ - memory_region_add_subregion_overlap(secure_tag_sysmem, 0, - tag_sysmem, -1); - } - } - - object_property_set_link(cpuobj, "tag-memory", OBJECT(tag_sysmem), - &error_abort); - if (vms->secure) { - object_property_set_link(cpuobj, "secure-tag-memory", - OBJECT(secure_tag_sysmem), - &error_abort); + kvm_arm_enable_mte(cpuobj, &error_abort); } } diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_STRONG); } + cpu->has_mte = true; } #endif } @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (cpu->tag_memory) { error_setg(errp, - "Cannot enable %s when guest CPUs has MTE enabled", + "Cannot enable %s when guest CPUs has tag memory enabled", current_accel_name()); return; } @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } #ifndef CONFIG_USER_ONLY - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) { + if (!cpu->has_mte && cpu_isar_feature(aa64_mte, cpu)) { /* - * Disable the MTE feature bits if we do not have tag-memory - * provided by the machine. + * Disable the MTE feature bits if we do not have the feature + * setup by the machine. */ cpu->isar.id_aa64pfr1 = FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/irq.h" #include "qemu/log.h" +#include "migration/blocker.h" const KVMCapabilityInfo kvm_arch_required_capabilities[] = { KVM_CAP_LAST_INFO @@ -XXX,XX +XXX,XX @@ bool kvm_arch_cpu_check_are_resettable(void) void kvm_arch_accel_class_init(ObjectClass *oc) { } + +void kvm_arm_enable_mte(Object *cpuobj, Error **errp) +{ + static bool tried_to_enable; + static bool succeeded_to_enable; + Error *mte_migration_blocker = NULL; + int ret; + + if (!tried_to_enable) { + /* + * MTE on KVM is enabled on a per-VM basis (and retrying doesn't make + * sense), and we only want a single migration blocker as well. + */ + tried_to_enable = true; + + ret = kvm_vm_enable_cap(kvm_state, KVM_CAP_ARM_MTE, 0); + if (ret) { + error_setg_errno(errp, -ret, "Failed to enable KVM_CAP_ARM_MTE"); + return; + } + + /* TODO: add proper migration support with MTE enabled */ + error_setg(&mte_migration_blocker, + "Live migration disabled due to MTE enabled"); + if (migrate_add_blocker(mte_migration_blocker, errp)) { + error_free(mte_migration_blocker); + return; + } + succeeded_to_enable = true; + } + if (succeeded_to_enable) { + object_property_set_bool(cpuobj, "has_mte", true, NULL); + } +} diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_steal_time_supported(void) return kvm_check_extension(kvm_state, KVM_CAP_STEAL_TIME); } +bool kvm_arm_mte_supported(void) +{ + return kvm_check_extension(kvm_state, KVM_CAP_ARM_MTE); +} + QEMU_BUILD_BUG_ON(KVM_ARM64_SVE_VQ_MIN != 1); uint32_t kvm_arm_sve_get_vls(CPUState *cs) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The commit b3aa2f2128 (target/arm: provide stubs for more external debug registers) was added to handle HyperV's unconditional usage of Debug Communications Channel. It turns out that Linux will similarly break if you enable CONFIG_HVC_DCC "ARM JTAG DCC console". Extend the registers we RAZ/WI set to avoid this. Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230516104420.407912-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .access = PL0_R, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, /* - * OSDTRRX_EL1/OSDTRTX_EL1 are used for save and restore of DBGDTRRX_EL0. - * It is a component of the Debug Communications Channel, which is not implemented. + * These registers belong to the Debug Communications Channel, + * which is not implemented. However we implement RAZ/WI behaviour + * with trapping to prevent spurious SIGILLs if the guest OS does + * access them as the support cannot be probed for. */ { .name = "OSDTRRX_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2, .access = PL1_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, + /* DBGDTRTX_EL0/DBGDTRRX_EL0 depend on direction */ + { .name = "DBGDTR_EL0", .state = ARM_CP_STATE_BOTH, .cp = 14, + .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0, + .access = PL0_RW, .accessfn = access_tdcc, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system * to access the contents of EDECCR. EDECCR is not implemented though, -- 2.34.1 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Bochs card is normal PCI Express card so it fits better in system with PCI Express bus. VGA is simple legacy PCI card. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230505120936.1097060-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void create_pcie(SBSAMachineState *sms) } } - pci_create_simple(pci->bus, -1, "VGA"); + pci_create_simple(pci->bus, -1, "bochs-display"); create_smmu(sms, pci->bus); } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Split out all of the decode stuff from aarch64_tr_translate_insn. Call it disas_a64_legacy to indicate it will be replaced. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-2-peter.maydell@linaro.org [PMM: Rebased] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-a64.c | 82 ++++++++++++++++++---------------- 1 file changed, 44 insertions(+), 38 deletions(-) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype) return false; } +/* C3.1 A64 instruction index by encoding */ +static void disas_a64_legacy(DisasContext *s, uint32_t insn) +{ + switch (extract32(insn, 25, 4)) { + case 0x0: + if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) { + unallocated_encoding(s); + } + break; + case 0x1: case 0x3: /* UNALLOCATED */ + unallocated_encoding(s); + break; + case 0x2: + if (!disas_sve(s, insn)) { + unallocated_encoding(s); + } + break; + case 0x8: case 0x9: /* Data processing - immediate */ + disas_data_proc_imm(s, insn); + break; + case 0xa: case 0xb: /* Branch, exception generation and system insns */ + disas_b_exc_sys(s, insn); + break; + case 0x4: + case 0x6: + case 0xc: + case 0xe: /* Loads and stores */ + disas_ldst(s, insn); + break; + case 0x5: + case 0xd: /* Data processing - register */ + disas_data_proc_reg(s, insn); + break; + case 0x7: + case 0xf: /* Data processing - SIMD and floating point */ + disas_data_proc_simd_fp(s, insn); + break; + default: + assert(FALSE); /* all 15 cases should be handled above */ + break; + } +} + static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cpu) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) disas_sme_fa64(s, insn); } - switch (extract32(insn, 25, 4)) { - case 0x0: - if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) { - unallocated_encoding(s); - } - break; - case 0x1: case 0x3: /* UNALLOCATED */ - unallocated_encoding(s); - break; - case 0x2: - if (!disas_sve(s, insn)) { - unallocated_encoding(s); - } - break; - case 0x8: case 0x9: /* Data processing - immediate */ - disas_data_proc_imm(s, insn); - break; - case 0xa: case 0xb: /* Branch, exception generation and system insns */ - disas_b_exc_sys(s, insn); - break; - case 0x4: - case 0x6: - case 0xc: - case 0xe: /* Loads and stores */ - disas_ldst(s, insn); - break; - case 0x5: - case 0xd: /* Data processing - register */ - disas_data_proc_reg(s, insn); - break; - case 0x7: - case 0xf: /* Data processing - SIMD and floating point */ - disas_data_proc_simd_fp(s, insn); - break; - default: - assert(FALSE); /* all 15 cases should be handled above */ - break; - } + disas_a64_legacy(s, insn); /* * After execution of most insns, btype is reset to 0. -- 2.34.1 The A64 translator uses a hand-written decoder for everything except SVE or SME. It's fairly well structured, but it's becoming obvious that it's still more painful to add instructions to than the A32 translator, because putting a new instruction into the right place in a hand-written decoder is much harder than adding new instruction patterns to a decodetree file. As the first step in conversion to decodetree, create the skeleton of the decodetree decoder; where it does not handle instructions we will fall back to the legacy decoder (which will be for everything at the moment, since there are no patterns in a64.decode). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-3-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 20 ++++++++++++++++++++ target/arm/tcg/translate-a64.c | 18 +++++++++++------- target/arm/tcg/meson.build | 1 + 3 files changed, 32 insertions(+), 7 deletions(-) create mode 100644 target/arm/tcg/a64.decode diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ +# AArch64 A64 allowed instruction decoding +# +# Copyright (c) 2023 Linaro, Ltd +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>. + +# +# This file is processed by scripts/decodetree.py +# diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ enum a64_shift_type { A64_SHIFT_TYPE_ROR = 3 }; +/* + * Include the generated decoders. + */ + +#include "decode-sme-fa64.c.inc" +#include "decode-a64.c.inc" + /* Table based decoder typedefs - used when the relevant bits for decode * are too awkwardly scattered across the instruction (eg SIMD). */ @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_simd_fp(DisasContext *s, uint32_t insn) } } -/* - * Include the generated SME FA64 decoder. - */ - -#include "decode-sme-fa64.c.inc" - static bool trans_OK(DisasContext *s, arg_OK *a) { return true; @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) disas_sme_fa64(s, insn); } - disas_a64_legacy(s, insn); + + if (!disas_a64(s, insn)) { + disas_a64_legacy(s, insn); + } /* * After execution of most insns, btype is reset to 0. diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ gen = [ decodetree.process('a32-uncond.decode', extra_args: '--static-decode=disas_a32_uncond'), decodetree.process('t32.decode', extra_args: '--static-decode=disas_t32'), decodetree.process('t16.decode', extra_args: ['-w', '16', '--static-decode=disas_t16']), + decodetree.process('a64.decode', extra_args: ['--static-decode=disas_a64']), ] arm_ss.add(gen) -- 2.34.1 The SVE and SME decode is already done by decodetree. Pull the calls to these decoders out of the legacy decoder. This doesn't change behaviour because all the patterns in sve.decode and sme.decode already require the bits that the legacy decoder is decoding to have the correct values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-4-peter.maydell@linaro.org --- target/arm/tcg/translate-a64.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype) static void disas_a64_legacy(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 4)) { - case 0x0: - if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) { - unallocated_encoding(s); - } - break; - case 0x1: case 0x3: /* UNALLOCATED */ - unallocated_encoding(s); - break; - case 0x2: - if (!disas_sve(s, insn)) { - unallocated_encoding(s); - } - break; case 0x8: case 0x9: /* Data processing - immediate */ disas_data_proc_imm(s, insn); break; @@ -XXX,XX +XXX,XX @@ static void disas_a64_legacy(DisasContext *s, uint32_t insn) disas_data_proc_simd_fp(s, insn); break; default: - assert(FALSE); /* all 15 cases should be handled above */ + unallocated_encoding(s); break; } } @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) disas_sme_fa64(s, insn); } - - if (!disas_a64(s, insn)) { + if (!disas_a64(s, insn) && + !disas_sme(s, insn) && + !disas_sve(s, insn)) { disas_a64_legacy(s, insn); } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Convert the ADR and ADRP instructions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-5-peter.maydell@linaro.org [PMM: Rebased] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/a64.decode | 13 ++++++++++++ target/arm/tcg/translate-a64.c | 38 +++++++++++++--------------------- 2 files changed, 27 insertions(+), 24 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ # # This file is processed by scripts/decodetree.py # + +&ri rd imm + + +### Data Processing - Immediate + +# PC-rel addressing + +%imm_pcrel 5:s19 29:2 +@pcrel . .. ..... ................... rd:5 &ri imm=%imm_pcrel + +ADR 0 .. 10000 ................... ..... @pcrel +ADRP 1 .. 10000 ................... ..... @pcrel diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst(DisasContext *s, uint32_t insn) } } -/* PC-rel. addressing - * 31 30 29 28 24 23 5 4 0 - * +----+-------+-----------+-------------------+------+ - * | op | immlo | 1 0 0 0 0 | immhi | Rd | - * +----+-------+-----------+-------------------+------+ +/* + * PC-rel. addressing */ -static void disas_pc_rel_adr(DisasContext *s, uint32_t insn) + +static bool trans_ADR(DisasContext *s, arg_ri *a) { - unsigned int page, rd; - int64_t offset; + gen_pc_plus_diff(s, cpu_reg(s, a->rd), a->imm); + return true; +} - page = extract32(insn, 31, 1); - /* SignExtend(immhi:immlo) -> offset */ - offset = sextract64(insn, 5, 19); - offset = offset << 2 | extract32(insn, 29, 2); - rd = extract32(insn, 0, 5); +static bool trans_ADRP(DisasContext *s, arg_ri *a) +{ + int64_t offset = (int64_t)a->imm << 12; - if (page) { - /* ADRP (page based) */ - offset <<= 12; - /* The page offset is ok for CF_PCREL. */ - offset -= s->pc_curr & 0xfff; - } - - gen_pc_plus_diff(s, cpu_reg(s, rd), offset); + /* The page offset is ok for CF_PCREL. */ + offset -= s->pc_curr & 0xfff; + gen_pc_plus_diff(s, cpu_reg(s, a->rd), offset); + return true; } /* @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) static void disas_data_proc_imm(DisasContext *s, uint32_t insn) { switch (extract32(insn, 23, 6)) { - case 0x20: case 0x21: /* PC-rel. addressing */ - disas_pc_rel_adr(s, insn); - break; case 0x22: /* Add/subtract (immediate) */ disas_add_sub_imm(s, insn); break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Split out specific 32-bit and 64-bit functions. These carry the same signature as tcg_gen_add_i64, and so will be easier to pass as callbacks. Retain gen_add_CC and gen_sub_CC during conversion. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-6-peter.maydell@linaro.org [PMM: rebased] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-a64.c | 149 +++++++++++++++++++-------------- 1 file changed, 84 insertions(+), 65 deletions(-) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static inline void gen_logic_CC(int sf, TCGv_i64 result) } /* dest = T0 + T1; compute C, N, V and Z flags */ +static void gen_add64_CC(TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1) +{ + TCGv_i64 result, flag, tmp; + result = tcg_temp_new_i64(); + flag = tcg_temp_new_i64(); + tmp = tcg_temp_new_i64(); + + tcg_gen_movi_i64(tmp, 0); + tcg_gen_add2_i64(result, flag, t0, tmp, t1, tmp); + + tcg_gen_extrl_i64_i32(cpu_CF, flag); + + gen_set_NZ64(result); + + tcg_gen_xor_i64(flag, result, t0); + tcg_gen_xor_i64(tmp, t0, t1); + tcg_gen_andc_i64(flag, flag, tmp); + tcg_gen_extrh_i64_i32(cpu_VF, flag); + + tcg_gen_mov_i64(dest, result); +} + +static void gen_add32_CC(TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1) +{ + TCGv_i32 t0_32 = tcg_temp_new_i32(); + TCGv_i32 t1_32 = tcg_temp_new_i32(); + TCGv_i32 tmp = tcg_temp_new_i32(); + + tcg_gen_movi_i32(tmp, 0); + tcg_gen_extrl_i64_i32(t0_32, t0); + tcg_gen_extrl_i64_i32(t1_32, t1); + tcg_gen_add2_i32(cpu_NF, cpu_CF, t0_32, tmp, t1_32, tmp); + tcg_gen_mov_i32(cpu_ZF, cpu_NF); + tcg_gen_xor_i32(cpu_VF, cpu_NF, t0_32); + tcg_gen_xor_i32(tmp, t0_32, t1_32); + tcg_gen_andc_i32(cpu_VF, cpu_VF, tmp); + tcg_gen_extu_i32_i64(dest, cpu_NF); +} + static void gen_add_CC(int sf, TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1) { if (sf) { - TCGv_i64 result, flag, tmp; - result = tcg_temp_new_i64(); - flag = tcg_temp_new_i64(); - tmp = tcg_temp_new_i64(); - - tcg_gen_movi_i64(tmp, 0); - tcg_gen_add2_i64(result, flag, t0, tmp, t1, tmp); - - tcg_gen_extrl_i64_i32(cpu_CF, flag); - - gen_set_NZ64(result); - - tcg_gen_xor_i64(flag, result, t0); - tcg_gen_xor_i64(tmp, t0, t1); - tcg_gen_andc_i64(flag, flag, tmp); - tcg_gen_extrh_i64_i32(cpu_VF, flag); - - tcg_gen_mov_i64(dest, result); + gen_add64_CC(dest, t0, t1); } else { - /* 32 bit arithmetic */ - TCGv_i32 t0_32 = tcg_temp_new_i32(); - TCGv_i32 t1_32 = tcg_temp_new_i32(); - TCGv_i32 tmp = tcg_temp_new_i32(); - - tcg_gen_movi_i32(tmp, 0); - tcg_gen_extrl_i64_i32(t0_32, t0); - tcg_gen_extrl_i64_i32(t1_32, t1); - tcg_gen_add2_i32(cpu_NF, cpu_CF, t0_32, tmp, t1_32, tmp); - tcg_gen_mov_i32(cpu_ZF, cpu_NF); - tcg_gen_xor_i32(cpu_VF, cpu_NF, t0_32); - tcg_gen_xor_i32(tmp, t0_32, t1_32); - tcg_gen_andc_i32(cpu_VF, cpu_VF, tmp); - tcg_gen_extu_i32_i64(dest, cpu_NF); + gen_add32_CC(dest, t0, t1); } } /* dest = T0 - T1; compute C, N, V and Z flags */ +static void gen_sub64_CC(TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1) +{ + /* 64 bit arithmetic */ + TCGv_i64 result, flag, tmp; + + result = tcg_temp_new_i64(); + flag = tcg_temp_new_i64(); + tcg_gen_sub_i64(result, t0, t1); + + gen_set_NZ64(result); + + tcg_gen_setcond_i64(TCG_COND_GEU, flag, t0, t1); + tcg_gen_extrl_i64_i32(cpu_CF, flag); + + tcg_gen_xor_i64(flag, result, t0); + tmp = tcg_temp_new_i64(); + tcg_gen_xor_i64(tmp, t0, t1); + tcg_gen_and_i64(flag, flag, tmp); + tcg_gen_extrh_i64_i32(cpu_VF, flag); + tcg_gen_mov_i64(dest, result); +} + +static void gen_sub32_CC(TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1) +{ + /* 32 bit arithmetic */ + TCGv_i32 t0_32 = tcg_temp_new_i32(); + TCGv_i32 t1_32 = tcg_temp_new_i32(); + TCGv_i32 tmp; + + tcg_gen_extrl_i64_i32(t0_32, t0); + tcg_gen_extrl_i64_i32(t1_32, t1); + tcg_gen_sub_i32(cpu_NF, t0_32, t1_32); + tcg_gen_mov_i32(cpu_ZF, cpu_NF); + tcg_gen_setcond_i32(TCG_COND_GEU, cpu_CF, t0_32, t1_32); + tcg_gen_xor_i32(cpu_VF, cpu_NF, t0_32); + tmp = tcg_temp_new_i32(); + tcg_gen_xor_i32(tmp, t0_32, t1_32); + tcg_gen_and_i32(cpu_VF, cpu_VF, tmp); + tcg_gen_extu_i32_i64(dest, cpu_NF); +} + static void gen_sub_CC(int sf, TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1) { if (sf) { - /* 64 bit arithmetic */ - TCGv_i64 result, flag, tmp; - - result = tcg_temp_new_i64(); - flag = tcg_temp_new_i64(); - tcg_gen_sub_i64(result, t0, t1); - - gen_set_NZ64(result); - - tcg_gen_setcond_i64(TCG_COND_GEU, flag, t0, t1); - tcg_gen_extrl_i64_i32(cpu_CF, flag); - - tcg_gen_xor_i64(flag, result, t0); - tmp = tcg_temp_new_i64(); - tcg_gen_xor_i64(tmp, t0, t1); - tcg_gen_and_i64(flag, flag, tmp); - tcg_gen_extrh_i64_i32(cpu_VF, flag); - tcg_gen_mov_i64(dest, result); + gen_sub64_CC(dest, t0, t1); } else { - /* 32 bit arithmetic */ - TCGv_i32 t0_32 = tcg_temp_new_i32(); - TCGv_i32 t1_32 = tcg_temp_new_i32(); - TCGv_i32 tmp; - - tcg_gen_extrl_i64_i32(t0_32, t0); - tcg_gen_extrl_i64_i32(t1_32, t1); - tcg_gen_sub_i32(cpu_NF, t0_32, t1_32); - tcg_gen_mov_i32(cpu_ZF, cpu_NF); - tcg_gen_setcond_i32(TCG_COND_GEU, cpu_CF, t0_32, t1_32); - tcg_gen_xor_i32(cpu_VF, cpu_NF, t0_32); - tmp = tcg_temp_new_i32(); - tcg_gen_xor_i32(tmp, t0_32, t1_32); - tcg_gen_and_i32(cpu_VF, cpu_VF, tmp); - tcg_gen_extu_i32_i64(dest, cpu_NF); + gen_sub32_CC(dest, t0, t1); } } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Convert the ADD and SUB (immediate) instructions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-7-peter.maydell@linaro.org [PMM: Rebased; adjusted to use translate.h's TRANS macro] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate.h | 5 +++ target/arm/tcg/a64.decode | 17 ++++++++ target/arm/tcg/translate-a64.c | 73 ++++++++++------------------------ 3 files changed, 42 insertions(+), 53 deletions(-) diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.h +++ b/target/arm/tcg/translate.h @@ -XXX,XX +XXX,XX @@ static inline int rsub_8(DisasContext *s, int x) return 8 - x; } +static inline int shl_12(DisasContext *s, int x) +{ + return x << 12; +} + static inline int neon_3same_fp_size(DisasContext *s, int x) { /* Convert 0==fp32, 1==fp16 into a MO_* value */ diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ # &ri rd imm +&rri_sf rd rn imm sf ### Data Processing - Immediate @@ -XXX,XX +XXX,XX @@ ADR 0 .. 10000 ................... ..... @pcrel ADRP 1 .. 10000 ................... ..... @pcrel + +# Add/subtract (immediate) + +%imm12_sh12 10:12 !function=shl_12 +@addsub_imm sf:1 .. ...... . imm:12 rn:5 rd:5 +@addsub_imm12 sf:1 .. ...... . ............ rn:5 rd:5 imm=%imm12_sh12 + +ADD_i . 00 100010 0 ............ ..... ..... @addsub_imm +ADD_i . 00 100010 1 ............ ..... ..... @addsub_imm12 +ADDS_i . 01 100010 0 ............ ..... ..... @addsub_imm +ADDS_i . 01 100010 1 ............ ..... ..... @addsub_imm12 + +SUB_i . 10 100010 0 ............ ..... ..... @addsub_imm +SUB_i . 10 100010 1 ............ ..... ..... @addsub_imm12 +SUBS_i . 11 100010 0 ............ ..... ..... @addsub_imm +SUBS_i . 11 100010 1 ............ ..... ..... @addsub_imm12 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst(DisasContext *s, uint32_t insn) } } +typedef void ArithTwoOp(TCGv_i64, TCGv_i64, TCGv_i64); + +static bool gen_rri(DisasContext *s, arg_rri_sf *a, + bool rd_sp, bool rn_sp, ArithTwoOp *fn) +{ + TCGv_i64 tcg_rn = rn_sp ? cpu_reg_sp(s, a->rn) : cpu_reg(s, a->rn); + TCGv_i64 tcg_rd = rd_sp ? cpu_reg_sp(s, a->rd) : cpu_reg(s, a->rd); + TCGv_i64 tcg_imm = tcg_constant_i64(a->imm); + + fn(tcg_rd, tcg_rn, tcg_imm); + if (!a->sf) { + tcg_gen_ext32u_i64(tcg_rd, tcg_rd); + } + return true; +} + /* * PC-rel. addressing */ @@ -XXX,XX +XXX,XX @@ static bool trans_ADRP(DisasContext *s, arg_ri *a) /* * Add/subtract (immediate) - * - * 31 30 29 28 23 22 21 10 9 5 4 0 - * +--+--+--+-------------+--+-------------+-----+-----+ - * |sf|op| S| 1 0 0 0 1 0 |sh| imm12 | Rn | Rd | - * +--+--+--+-------------+--+-------------+-----+-----+ - * - * sf: 0 -> 32bit, 1 -> 64bit - * op: 0 -> add , 1 -> sub - * S: 1 -> set flags - * sh: 1 -> LSL imm by 12 */ -static void disas_add_sub_imm(DisasContext *s, uint32_t insn) -{ - int rd = extract32(insn, 0, 5); - int rn = extract32(insn, 5, 5); - uint64_t imm = extract32(insn, 10, 12); - bool shift = extract32(insn, 22, 1); - bool setflags = extract32(insn, 29, 1); - bool sub_op = extract32(insn, 30, 1); - bool is_64bit = extract32(insn, 31, 1); - - TCGv_i64 tcg_rn = cpu_reg_sp(s, rn); - TCGv_i64 tcg_rd = setflags ? cpu_reg(s, rd) : cpu_reg_sp(s, rd); - TCGv_i64 tcg_result; - - if (shift) { - imm <<= 12; - } - - tcg_result = tcg_temp_new_i64(); - if (!setflags) { - if (sub_op) { - tcg_gen_subi_i64(tcg_result, tcg_rn, imm); - } else { - tcg_gen_addi_i64(tcg_result, tcg_rn, imm); - } - } else { - TCGv_i64 tcg_imm = tcg_constant_i64(imm); - if (sub_op) { - gen_sub_CC(is_64bit, tcg_result, tcg_rn, tcg_imm); - } else { - gen_add_CC(is_64bit, tcg_result, tcg_rn, tcg_imm); - } - } - - if (is_64bit) { - tcg_gen_mov_i64(tcg_rd, tcg_result); - } else { - tcg_gen_ext32u_i64(tcg_rd, tcg_result); - } -} +TRANS(ADD_i, gen_rri, a, 1, 1, tcg_gen_add_i64) +TRANS(SUB_i, gen_rri, a, 1, 1, tcg_gen_sub_i64) +TRANS(ADDS_i, gen_rri, a, 0, 1, a->sf ? gen_add64_CC : gen_add32_CC) +TRANS(SUBS_i, gen_rri, a, 0, 1, a->sf ? gen_sub64_CC : gen_sub32_CC) /* * Add/subtract (immediate, with tags) @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) static void disas_data_proc_imm(DisasContext *s, uint32_t insn) { switch (extract32(insn, 23, 6)) { - case 0x22: /* Add/subtract (immediate) */ - disas_add_sub_imm(s, insn); - break; case 0x23: /* Add/subtract (immediate, with tags) */ disas_add_sub_imm_with_tags(s, insn); break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Convert the ADDG and SUBG (immediate) instructions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-8-peter.maydell@linaro.org [PMM: Rebased; use TRANS_FEAT()] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/a64.decode | 8 +++++++ target/arm/tcg/translate-a64.c | 38 ++++++++++------------------------ 2 files changed, 19 insertions(+), 27 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ SUB_i . 10 100010 0 ............ ..... ..... @addsub_imm SUB_i . 10 100010 1 ............ ..... ..... @addsub_imm12 SUBS_i . 11 100010 0 ............ ..... ..... @addsub_imm SUBS_i . 11 100010 1 ............ ..... ..... @addsub_imm12 + +# Add/subtract (immediate with tags) + +&rri_tag rd rn uimm6 uimm4 +@addsub_imm_tag . .. ...... . uimm6:6 .. uimm4:4 rn:5 rd:5 &rri_tag + +ADDG_i 1 00 100011 0 ...... 00 .... ..... ..... @addsub_imm_tag +SUBG_i 1 10 100011 0 ...... 00 .... ..... ..... @addsub_imm_tag diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ TRANS(SUBS_i, gen_rri, a, 0, 1, a->sf ? gen_sub64_CC : gen_sub32_CC) /* * Add/subtract (immediate, with tags) - * - * 31 30 29 28 23 22 21 16 14 10 9 5 4 0 - * +--+--+--+-------------+--+---------+--+-------+-----+-----+ - * |sf|op| S| 1 0 0 0 1 1 |o2| uimm6 |o3| uimm4 | Rn | Rd | - * +--+--+--+-------------+--+---------+--+-------+-----+-----+ - * - * op: 0 -> add, 1 -> sub */ -static void disas_add_sub_imm_with_tags(DisasContext *s, uint32_t insn) + +static bool gen_add_sub_imm_with_tags(DisasContext *s, arg_rri_tag *a, + bool sub_op) { - int rd = extract32(insn, 0, 5); - int rn = extract32(insn, 5, 5); - int uimm4 = extract32(insn, 10, 4); - int uimm6 = extract32(insn, 16, 6); - bool sub_op = extract32(insn, 30, 1); TCGv_i64 tcg_rn, tcg_rd; int imm; - /* Test all of sf=1, S=0, o2=0, o3=0. */ - if ((insn & 0xa040c000u) != 0x80000000u || - !dc_isar_feature(aa64_mte_insn_reg, s)) { - unallocated_encoding(s); - return; - } - - imm = uimm6 << LOG2_TAG_GRANULE; + imm = a->uimm6 << LOG2_TAG_GRANULE; if (sub_op) { imm = -imm; } - tcg_rn = cpu_reg_sp(s, rn); - tcg_rd = cpu_reg_sp(s, rd); + tcg_rn = cpu_reg_sp(s, a->rn); + tcg_rd = cpu_reg_sp(s, a->rd); if (s->ata) { gen_helper_addsubg(tcg_rd, cpu_env, tcg_rn, tcg_constant_i32(imm), - tcg_constant_i32(uimm4)); + tcg_constant_i32(a->uimm4)); } else { tcg_gen_addi_i64(tcg_rd, tcg_rn, imm); gen_address_with_allocation_tag0(tcg_rd, tcg_rd); } + return true; } +TRANS_FEAT(ADDG_i, aa64_mte_insn_reg, gen_add_sub_imm_with_tags, a, false) +TRANS_FEAT(SUBG_i, aa64_mte_insn_reg, gen_add_sub_imm_with_tags, a, true) + /* The input should be a value in the bottom e bits (with higher * bits zero); returns that value replicated into every element * of size e in a 64 bit integer. @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) static void disas_data_proc_imm(DisasContext *s, uint32_t insn) { switch (extract32(insn, 23, 6)) { - case 0x23: /* Add/subtract (immediate, with tags) */ - disas_add_sub_imm_with_tags(s, insn); - break; case 0x24: /* Logical (immediate) */ disas_logic_imm(s, insn); break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Use the bitops.h macro rather than rolling our own here. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-9-peter.maydell@linaro.org --- target/arm/tcg/translate-a64.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t bitfield_replicate(uint64_t mask, unsigned int e) return mask; } -/* Return a value with the bottom len bits set (where 0 < len <= 64) */ -static inline uint64_t bitmask64(unsigned int length) -{ - assert(length > 0 && length <= 64); - return ~0ULL >> (64 - length); -} - /* Simplified variant of pseudocode DecodeBitMasks() for the case where we * only require the wmask. Returns false if the imms/immr/immn are a reserved * value (ie should cause a guest UNDEF exception), and true if they are @@ -XXX,XX +XXX,XX @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, /* Create the value of one element: s+1 set bits rotated * by r within the element (which is e bits wide)... */ - mask = bitmask64(s + 1); + mask = MAKE_64BIT_MASK(0, s + 1); if (r) { mask = (mask >> r) | (mask << (e - r)); - mask &= bitmask64(e); + mask &= MAKE_64BIT_MASK(0, e); } /* ...then replicate the element over the whole 64 bit value */ mask = bitfield_replicate(mask, e); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Convert the ADD, ORR, EOR, ANDS (immediate) instructions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-10-peter.maydell@linaro.org [PMM: rebased] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/a64.decode | 15 ++++++ target/arm/tcg/translate-a64.c | 94 +++++++++++----------------------- 2 files changed, 44 insertions(+), 65 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ SUBS_i . 11 100010 1 ............ ..... ..... @addsub_imm12 ADDG_i 1 00 100011 0 ...... 00 .... ..... ..... @addsub_imm_tag SUBG_i 1 10 100011 0 ...... 00 .... ..... ..... @addsub_imm_tag + +# Logical (immediate) + +&rri_log rd rn sf dbm +@logic_imm_64 1 .. ...... dbm:13 rn:5 rd:5 &rri_log sf=1 +@logic_imm_32 0 .. ...... 0 dbm:12 rn:5 rd:5 &rri_log sf=0 + +AND_i . 00 100100 . ...... ...... ..... ..... @logic_imm_64 +AND_i . 00 100100 . ...... ...... ..... ..... @logic_imm_32 +ORR_i . 01 100100 . ...... ...... ..... ..... @logic_imm_64 +ORR_i . 01 100100 . ...... ...... ..... ..... @logic_imm_32 +EOR_i . 10 100100 . ...... ...... ..... ..... @logic_imm_64 +EOR_i . 10 100100 . ...... ...... ..... ..... @logic_imm_32 +ANDS_i . 11 100100 . ...... ...... ..... ..... @logic_imm_64 +ANDS_i . 11 100100 . ...... ...... ..... ..... @logic_imm_32 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t bitfield_replicate(uint64_t mask, unsigned int e) return mask; } -/* Simplified variant of pseudocode DecodeBitMasks() for the case where we +/* + * Logical (immediate) + */ + +/* + * Simplified variant of pseudocode DecodeBitMasks() for the case where we * only require the wmask. Returns false if the imms/immr/immn are a reserved * value (ie should cause a guest UNDEF exception), and true if they are * valid, in which case the decoded bit pattern is written to result. @@ -XXX,XX +XXX,XX @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, return true; } -/* Logical (immediate) - * 31 30 29 28 23 22 21 16 15 10 9 5 4 0 - * +----+-----+-------------+---+------+------+------+------+ - * | sf | opc | 1 0 0 1 0 0 | N | immr | imms | Rn | Rd | - * +----+-----+-------------+---+------+------+------+------+ - */ -static void disas_logic_imm(DisasContext *s, uint32_t insn) +static bool gen_rri_log(DisasContext *s, arg_rri_log *a, bool set_cc, + void (*fn)(TCGv_i64, TCGv_i64, int64_t)) { - unsigned int sf, opc, is_n, immr, imms, rn, rd; TCGv_i64 tcg_rd, tcg_rn; - uint64_t wmask; - bool is_and = false; + uint64_t imm; - sf = extract32(insn, 31, 1); - opc = extract32(insn, 29, 2); - is_n = extract32(insn, 22, 1); - immr = extract32(insn, 16, 6); - imms = extract32(insn, 10, 6); - rn = extract32(insn, 5, 5); - rd = extract32(insn, 0, 5); - - if (!sf && is_n) { - unallocated_encoding(s); - return; + /* Some immediate field values are reserved. */ + if (!logic_imm_decode_wmask(&imm, extract32(a->dbm, 12, 1), + extract32(a->dbm, 0, 6), + extract32(a->dbm, 6, 6))) { + return false; + } + if (!a->sf) { + imm &= 0xffffffffull; } - if (opc == 0x3) { /* ANDS */ - tcg_rd = cpu_reg(s, rd); - } else { - tcg_rd = cpu_reg_sp(s, rd); - } - tcg_rn = cpu_reg(s, rn); + tcg_rd = set_cc ? cpu_reg(s, a->rd) : cpu_reg_sp(s, a->rd); + tcg_rn = cpu_reg(s, a->rn); - if (!logic_imm_decode_wmask(&wmask, is_n, imms, immr)) { - /* some immediate field values are reserved */ - unallocated_encoding(s); - return; + fn(tcg_rd, tcg_rn, imm); + if (set_cc) { + gen_logic_CC(a->sf, tcg_rd); } - - if (!sf) { - wmask &= 0xffffffff; - } - - switch (opc) { - case 0x3: /* ANDS */ - case 0x0: /* AND */ - tcg_gen_andi_i64(tcg_rd, tcg_rn, wmask); - is_and = true; - break; - case 0x1: /* ORR */ - tcg_gen_ori_i64(tcg_rd, tcg_rn, wmask); - break; - case 0x2: /* EOR */ - tcg_gen_xori_i64(tcg_rd, tcg_rn, wmask); - break; - default: - assert(FALSE); /* must handle all above */ - break; - } - - if (!sf && !is_and) { - /* zero extend final result; we know we can skip this for AND - * since the immediate had the high 32 bits clear. - */ + if (!a->sf) { tcg_gen_ext32u_i64(tcg_rd, tcg_rd); } - - if (opc == 3) { /* ANDS */ - gen_logic_CC(sf, tcg_rd); - } + return true; } +TRANS(AND_i, gen_rri_log, a, false, tcg_gen_andi_i64) +TRANS(ORR_i, gen_rri_log, a, false, tcg_gen_ori_i64) +TRANS(EOR_i, gen_rri_log, a, false, tcg_gen_xori_i64) +TRANS(ANDS_i, gen_rri_log, a, true, tcg_gen_andi_i64) + /* * Move wide (immediate) * @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) static void disas_data_proc_imm(DisasContext *s, uint32_t insn) { switch (extract32(insn, 23, 6)) { - case 0x24: /* Logical (immediate) */ - disas_logic_imm(s, insn); - break; case 0x25: /* Move wide (immediate) */ disas_movw_imm(s, insn); break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Convert the MON, MOVZ, MOVK instructions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-11-peter.maydell@linaro.org [PMM: Rebased] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/a64.decode | 13 ++++++ target/arm/tcg/translate-a64.c | 73 ++++++++++++++-------------------- 2 files changed, 42 insertions(+), 44 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ EOR_i . 10 100100 . ...... ...... ..... ..... @logic_imm_64 EOR_i . 10 100100 . ...... ...... ..... ..... @logic_imm_32 ANDS_i . 11 100100 . ...... ...... ..... ..... @logic_imm_64 ANDS_i . 11 100100 . ...... ...... ..... ..... @logic_imm_32 + +# Move wide (immediate) + +&movw rd sf imm hw +@movw_64 1 .. ...... hw:2 imm:16 rd:5 &movw sf=1 +@movw_32 0 .. ...... 0 hw:1 imm:16 rd:5 &movw sf=0 + +MOVN . 00 100101 .. ................ ..... @movw_64 +MOVN . 00 100101 .. ................ ..... @movw_32 +MOVZ . 10 100101 .. ................ ..... @movw_64 +MOVZ . 10 100101 .. ................ ..... @movw_32 +MOVK . 11 100101 .. ................ ..... @movw_64 +MOVK . 11 100101 .. ................ ..... @movw_32 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ TRANS(ANDS_i, gen_rri_log, a, true, tcg_gen_andi_i64) /* * Move wide (immediate) - * - * 31 30 29 28 23 22 21 20 5 4 0 - * +--+-----+-------------+-----+----------------+------+ - * |sf| opc | 1 0 0 1 0 1 | hw | imm16 | Rd | - * +--+-----+-------------+-----+----------------+------+ - * - * sf: 0 -> 32 bit, 1 -> 64 bit - * opc: 00 -> N, 10 -> Z, 11 -> K - * hw: shift/16 (0,16, and sf only 32, 48) */ -static void disas_movw_imm(DisasContext *s, uint32_t insn) + +static bool trans_MOVZ(DisasContext *s, arg_movw *a) { - int rd = extract32(insn, 0, 5); - uint64_t imm = extract32(insn, 5, 16); - int sf = extract32(insn, 31, 1); - int opc = extract32(insn, 29, 2); - int pos = extract32(insn, 21, 2) << 4; - TCGv_i64 tcg_rd = cpu_reg(s, rd); + int pos = a->hw << 4; + tcg_gen_movi_i64(cpu_reg(s, a->rd), (uint64_t)a->imm << pos); + return true; +} - if (!sf && (pos >= 32)) { - unallocated_encoding(s); - return; - } +static bool trans_MOVN(DisasContext *s, arg_movw *a) +{ + int pos = a->hw << 4; + uint64_t imm = a->imm; - switch (opc) { - case 0: /* MOVN */ - case 2: /* MOVZ */ - imm <<= pos; - if (opc == 0) { - imm = ~imm; - } - if (!sf) { - imm &= 0xffffffffu; - } - tcg_gen_movi_i64(tcg_rd, imm); - break; - case 3: /* MOVK */ - tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_constant_i64(imm), pos, 16); - if (!sf) { - tcg_gen_ext32u_i64(tcg_rd, tcg_rd); - } - break; - default: - unallocated_encoding(s); - break; + imm = ~(imm << pos); + if (!a->sf) { + imm = (uint32_t)imm; } + tcg_gen_movi_i64(cpu_reg(s, a->rd), imm); + return true; +} + +static bool trans_MOVK(DisasContext *s, arg_movw *a) +{ + int pos = a->hw << 4; + TCGv_i64 tcg_rd, tcg_im; + + tcg_rd = cpu_reg(s, a->rd); + tcg_im = tcg_constant_i64(a->imm); + tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_im, pos, 16); + if (!a->sf) { + tcg_gen_ext32u_i64(tcg_rd, tcg_rd); + } + return true; } /* Bitfield @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) static void disas_data_proc_imm(DisasContext *s, uint32_t insn) { switch (extract32(insn, 23, 6)) { - case 0x25: /* Move wide (immediate) */ - disas_movw_imm(s, insn); - break; case 0x26: /* Bitfield */ disas_bitfield(s, insn); break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Convert the BFM, SBFM, UBFM instructions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230512144106.3608981-12-peter.maydell@linaro.org [PMM: Rebased] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/a64.decode | 13 +++ target/arm/tcg/translate-a64.c | 144 ++++++++++++++++++--------------- 2 files changed, 94 insertions(+), 63 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ MOVZ . 10 100101 .. ................ ..... @movw_64 MOVZ . 10 100101 .. ................ ..... @movw_32 MOVK . 11 100101 .. ................ ..... @movw_64 MOVK . 11 100101 .. ................ ..... @movw_32 + +# Bitfield + +&bitfield rd rn sf immr imms +@bitfield_64 1 .. ...... 1 immr:6 imms:6 rn:5 rd:5 &bitfield sf=1 +@bitfield_32 0 .. ...... 0 0 immr:5 0 imms:5 rn:5 rd:5 &bitfield sf=0 + +SBFM . 00 100110 . ...... ...... ..... ..... @bitfield_64 +SBFM . 00 100110 . ...... ...... ..... ..... @bitfield_32 +BFM . 01 100110 . ...... ...... ..... ..... @bitfield_64 +BFM . 01 100110 . ...... ...... ..... ..... @bitfield_32 +UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_64 +UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_32 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_MOVK(DisasContext *s, arg_movw *a) return true; } -/* Bitfield - * 31 30 29 28 23 22 21 16 15 10 9 5 4 0 - * +----+-----+-------------+---+------+------+------+------+ - * | sf | opc | 1 0 0 1 1 0 | N | immr | imms | Rn | Rd | - * +----+-----+-------------+---+------+------+------+------+ +/* + * Bitfield */ -static void disas_bitfield(DisasContext *s, uint32_t insn) + +static bool trans_SBFM(DisasContext *s, arg_SBFM *a) { - unsigned int sf, n, opc, ri, si, rn, rd, bitsize, pos, len; - TCGv_i64 tcg_rd, tcg_tmp; + TCGv_i64 tcg_rd = cpu_reg(s, a->rd); + TCGv_i64 tcg_tmp = read_cpu_reg(s, a->rn, 1); + unsigned int bitsize = a->sf ? 64 : 32; + unsigned int ri = a->immr; + unsigned int si = a->imms; + unsigned int pos, len; - sf = extract32(insn, 31, 1); - opc = extract32(insn, 29, 2); - n = extract32(insn, 22, 1); - ri = extract32(insn, 16, 6); - si = extract32(insn, 10, 6); - rn = extract32(insn, 5, 5); - rd = extract32(insn, 0, 5); - bitsize = sf ? 64 : 32; - - if (sf != n || ri >= bitsize || si >= bitsize || opc > 2) { - unallocated_encoding(s); - return; - } - - tcg_rd = cpu_reg(s, rd); - - /* Suppress the zero-extend for !sf. Since RI and SI are constrained - to be smaller than bitsize, we'll never reference data outside the - low 32-bits anyway. */ - tcg_tmp = read_cpu_reg(s, rn, 1); - - /* Recognize simple(r) extractions. */ if (si >= ri) { /* Wd<s-r:0> = Wn<s:r> */ len = (si - ri) + 1; - if (opc == 0) { /* SBFM: ASR, SBFX, SXTB, SXTH, SXTW */ - tcg_gen_sextract_i64(tcg_rd, tcg_tmp, ri, len); - goto done; - } else if (opc == 2) { /* UBFM: UBFX, LSR, UXTB, UXTH */ - tcg_gen_extract_i64(tcg_rd, tcg_tmp, ri, len); - return; + tcg_gen_sextract_i64(tcg_rd, tcg_tmp, ri, len); + if (!a->sf) { + tcg_gen_ext32u_i64(tcg_rd, tcg_rd); } - /* opc == 1, BFXIL fall through to deposit */ + } else { + /* Wd<32+s-r,32-r> = Wn<s:0> */ + len = si + 1; + pos = (bitsize - ri) & (bitsize - 1); + + if (len < ri) { + /* + * Sign extend the destination field from len to fill the + * balance of the word. Let the deposit below insert all + * of those sign bits. + */ + tcg_gen_sextract_i64(tcg_tmp, tcg_tmp, 0, len); + len = ri; + } + + /* + * We start with zero, and we haven't modified any bits outside + * bitsize, therefore no final zero-extension is unneeded for !sf. + */ + tcg_gen_deposit_z_i64(tcg_rd, tcg_tmp, pos, len); + } + return true; +} + +static bool trans_UBFM(DisasContext *s, arg_UBFM *a) +{ + TCGv_i64 tcg_rd = cpu_reg(s, a->rd); + TCGv_i64 tcg_tmp = read_cpu_reg(s, a->rn, 1); + unsigned int bitsize = a->sf ? 64 : 32; + unsigned int ri = a->immr; + unsigned int si = a->imms; + unsigned int pos, len; + + tcg_rd = cpu_reg(s, a->rd); + tcg_tmp = read_cpu_reg(s, a->rn, 1); + + if (si >= ri) { + /* Wd<s-r:0> = Wn<s:r> */ + len = (si - ri) + 1; + tcg_gen_extract_i64(tcg_rd, tcg_tmp, ri, len); + } else { + /* Wd<32+s-r,32-r> = Wn<s:0> */ + len = si + 1; + pos = (bitsize - ri) & (bitsize - 1); + tcg_gen_deposit_z_i64(tcg_rd, tcg_tmp, pos, len); + } + return true; +} + +static bool trans_BFM(DisasContext *s, arg_BFM *a) +{ + TCGv_i64 tcg_rd = cpu_reg(s, a->rd); + TCGv_i64 tcg_tmp = read_cpu_reg(s, a->rn, 1); + unsigned int bitsize = a->sf ? 64 : 32; + unsigned int ri = a->immr; + unsigned int si = a->imms; + unsigned int pos, len; + + tcg_rd = cpu_reg(s, a->rd); + tcg_tmp = read_cpu_reg(s, a->rn, 1); + + if (si >= ri) { + /* Wd<s-r:0> = Wn<s:r> */ tcg_gen_shri_i64(tcg_tmp, tcg_tmp, ri); + len = (si - ri) + 1; pos = 0; } else { - /* Handle the ri > si case with a deposit - * Wd<32+s-r,32-r> = Wn<s:0> - */ + /* Wd<32+s-r,32-r> = Wn<s:0> */ len = si + 1; pos = (bitsize - ri) & (bitsize - 1); } - if (opc == 0 && len < ri) { - /* SBFM: sign extend the destination field from len to fill - the balance of the word. Let the deposit below insert all - of those sign bits. */ - tcg_gen_sextract_i64(tcg_tmp, tcg_tmp, 0, len); - len = ri; - } - - if (opc == 1) { /* BFM, BFXIL */ - tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_tmp, pos, len); - } else { - /* SBFM or UBFM: We start with zero, and we haven't modified - any bits outside bitsize, therefore the zero-extension - below is unneeded. */ - tcg_gen_deposit_z_i64(tcg_rd, tcg_tmp, pos, len); - return; - } - - done: - if (!sf) { /* zero extend final result */ + tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_tmp, pos, len); + if (!a->sf) { tcg_gen_ext32u_i64(tcg_rd, tcg_rd); } + return true; } /* Extract @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) static void disas_data_proc_imm(DisasContext *s, uint32_t insn) { switch (extract32(insn, 23, 6)) { - case 0x26: /* Bitfield */ - disas_bitfield(s, insn); - break; case 0x27: /* Extract */ disas_extract(s, insn); break; -- 2.34.1 Convert the EXTR instruction to decodetree (this is the only one in the 'Extract" class). This is the last of the dp-immediate insns in the legacy decoder, so we can now remove disas_data_proc_imm(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-13-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 7 +++ target/arm/tcg/translate-a64.c | 94 +++++++++++----------------------- 2 files changed, 36 insertions(+), 65 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ BFM . 01 100110 . ...... ...... ..... ..... @bitfield_64 BFM . 01 100110 . ...... ...... ..... ..... @bitfield_32 UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_64 UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_32 + +# Extract + +&extract rd rn rm imm sf + +EXTR 1 00 100111 1 0 rm:5 imm:6 rn:5 rd:5 &extract sf=1 +EXTR 0 00 100111 0 0 rm:5 0 imm:5 rn:5 rd:5 &extract sf=0 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_BFM(DisasContext *s, arg_BFM *a) return true; } -/* Extract - * 31 30 29 28 23 22 21 20 16 15 10 9 5 4 0 - * +----+------+-------------+---+----+------+--------+------+------+ - * | sf | op21 | 1 0 0 1 1 1 | N | o0 | Rm | imms | Rn | Rd | - * +----+------+-------------+---+----+------+--------+------+------+ - */ -static void disas_extract(DisasContext *s, uint32_t insn) +static bool trans_EXTR(DisasContext *s, arg_extract *a) { - unsigned int sf, n, rm, imm, rn, rd, bitsize, op21, op0; + TCGv_i64 tcg_rd, tcg_rm, tcg_rn; - sf = extract32(insn, 31, 1); - n = extract32(insn, 22, 1); - rm = extract32(insn, 16, 5); - imm = extract32(insn, 10, 6); - rn = extract32(insn, 5, 5); - rd = extract32(insn, 0, 5); - op21 = extract32(insn, 29, 2); - op0 = extract32(insn, 21, 1); - bitsize = sf ? 64 : 32; + tcg_rd = cpu_reg(s, a->rd); - if (sf != n || op21 || op0 || imm >= bitsize) { - unallocated_encoding(s); - } else { - TCGv_i64 tcg_rd, tcg_rm, tcg_rn; - - tcg_rd = cpu_reg(s, rd); - - if (unlikely(imm == 0)) { - /* tcg shl_i32/shl_i64 is undefined for 32/64 bit shifts, - * so an extract from bit 0 is a special case. - */ - if (sf) { - tcg_gen_mov_i64(tcg_rd, cpu_reg(s, rm)); - } else { - tcg_gen_ext32u_i64(tcg_rd, cpu_reg(s, rm)); - } + if (unlikely(a->imm == 0)) { + /* + * tcg shl_i32/shl_i64 is undefined for 32/64 bit shifts, + * so an extract from bit 0 is a special case. + */ + if (a->sf) { + tcg_gen_mov_i64(tcg_rd, cpu_reg(s, a->rm)); } else { - tcg_rm = cpu_reg(s, rm); - tcg_rn = cpu_reg(s, rn); + tcg_gen_ext32u_i64(tcg_rd, cpu_reg(s, a->rm)); + } + } else { + tcg_rm = cpu_reg(s, a->rm); + tcg_rn = cpu_reg(s, a->rn); - if (sf) { - /* Specialization to ROR happens in EXTRACT2. */ - tcg_gen_extract2_i64(tcg_rd, tcg_rm, tcg_rn, imm); + if (a->sf) { + /* Specialization to ROR happens in EXTRACT2. */ + tcg_gen_extract2_i64(tcg_rd, tcg_rm, tcg_rn, a->imm); + } else { + TCGv_i32 t0 = tcg_temp_new_i32(); + + tcg_gen_extrl_i64_i32(t0, tcg_rm); + if (a->rm == a->rn) { + tcg_gen_rotri_i32(t0, t0, a->imm); } else { - TCGv_i32 t0 = tcg_temp_new_i32(); - - tcg_gen_extrl_i64_i32(t0, tcg_rm); - if (rm == rn) { - tcg_gen_rotri_i32(t0, t0, imm); - } else { - TCGv_i32 t1 = tcg_temp_new_i32(); - tcg_gen_extrl_i64_i32(t1, tcg_rn); - tcg_gen_extract2_i32(t0, t0, t1, imm); - } - tcg_gen_extu_i32_i64(tcg_rd, t0); + TCGv_i32 t1 = tcg_temp_new_i32(); + tcg_gen_extrl_i64_i32(t1, tcg_rn); + tcg_gen_extract2_i32(t0, t0, t1, a->imm); } + tcg_gen_extu_i32_i64(tcg_rd, t0); } } -} - -/* Data processing - immediate */ -static void disas_data_proc_imm(DisasContext *s, uint32_t insn) -{ - switch (extract32(insn, 23, 6)) { - case 0x27: /* Extract */ - disas_extract(s, insn); - break; - default: - unallocated_encoding(s); - break; - } + return true; } /* Shift a TCGv src by TCGv shift_amount, put result in dst. @@ -XXX,XX +XXX,XX @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype) static void disas_a64_legacy(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 4)) { - case 0x8: case 0x9: /* Data processing - immediate */ - disas_data_proc_imm(s, insn); - break; case 0xa: case 0xb: /* Branch, exception generation and system insns */ disas_b_exc_sys(s, insn); break; -- 2.34.1 Convert the unconditional branch immediate insns B and BL to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-14-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 9 +++++++++ target/arm/tcg/translate-a64.c | 31 +++++++++++-------------------- 2 files changed, 20 insertions(+), 20 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ &ri rd imm &rri_sf rd rn imm sf +&i imm ### Data Processing - Immediate @@ -XXX,XX +XXX,XX @@ UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_32 EXTR 1 00 100111 1 0 rm:5 imm:6 rn:5 rd:5 &extract sf=1 EXTR 0 00 100111 0 0 rm:5 0 imm:5 rn:5 rd:5 &extract sf=0 + +# Branches + +%imm26 0:s26 !function=times_4 +@branch . ..... .......................... &i imm=%imm26 + +B 0 00101 .......................... @branch +BL 1 00101 .......................... @branch diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static inline AArch64DecodeFn *lookup_disas_fn(const AArch64DecodeTable *table, * match up with those in the manual. */ -/* Unconditional branch (immediate) - * 31 30 26 25 0 - * +----+-----------+-------------------------------------+ - * | op | 0 0 1 0 1 | imm26 | - * +----+-----------+-------------------------------------+ - */ -static void disas_uncond_b_imm(DisasContext *s, uint32_t insn) +static bool trans_B(DisasContext *s, arg_i *a) { - int64_t diff = sextract32(insn, 0, 26) * 4; - - if (insn & (1U << 31)) { - /* BL Branch with link */ - gen_pc_plus_diff(s, cpu_reg(s, 30), curr_insn_len(s)); - } - - /* B Branch / BL Branch with link */ reset_btype(s); - gen_goto_tb(s, 0, diff); + gen_goto_tb(s, 0, a->imm); + return true; +} + +static bool trans_BL(DisasContext *s, arg_i *a) +{ + gen_pc_plus_diff(s, cpu_reg(s, 30), curr_insn_len(s)); + reset_btype(s); + gen_goto_tb(s, 0, a->imm); + return true; } /* Compare and branch (immediate) @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) static void disas_b_exc_sys(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 7)) { - case 0x0a: case 0x0b: - case 0x4a: case 0x4b: /* Unconditional branch (immediate) */ - disas_uncond_b_imm(s, insn); - break; case 0x1a: case 0x5a: /* Compare & branch (immediate) */ disas_comp_b_imm(s, insn); break; -- 2.34.1 Convert the compare-and-branch-immediate insns CBZ and CBNZ to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-15-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 5 +++++ target/arm/tcg/translate-a64.c | 26 ++++++-------------------- 2 files changed, 11 insertions(+), 20 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ EXTR 0 00 100111 0 0 rm:5 0 imm:5 rn:5 rd:5 &extract sf=0 B 0 00101 .......................... @branch BL 1 00101 .......................... @branch + +%imm19 5:s19 !function=times_4 +&cbz rt imm sf nz + +CBZ sf:1 011010 nz:1 ................... rt:5 &cbz imm=%imm19 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_BL(DisasContext *s, arg_i *a) return true; } -/* Compare and branch (immediate) - * 31 30 25 24 23 5 4 0 - * +----+-------------+----+---------------------+--------+ - * | sf | 0 1 1 0 1 0 | op | imm19 | Rt | - * +----+-------------+----+---------------------+--------+ - */ -static void disas_comp_b_imm(DisasContext *s, uint32_t insn) + +static bool trans_CBZ(DisasContext *s, arg_cbz *a) { - unsigned int sf, op, rt; - int64_t diff; DisasLabel match; TCGv_i64 tcg_cmp; - sf = extract32(insn, 31, 1); - op = extract32(insn, 24, 1); /* 0: CBZ; 1: CBNZ */ - rt = extract32(insn, 0, 5); - diff = sextract32(insn, 5, 19) * 4; - - tcg_cmp = read_cpu_reg(s, rt, sf); + tcg_cmp = read_cpu_reg(s, a->rt, a->sf); reset_btype(s); match = gen_disas_label(s); - tcg_gen_brcondi_i64(op ? TCG_COND_NE : TCG_COND_EQ, + tcg_gen_brcondi_i64(a->nz ? TCG_COND_NE : TCG_COND_EQ, tcg_cmp, 0, match.label); gen_goto_tb(s, 0, 4); set_disas_label(s, match); - gen_goto_tb(s, 1, diff); + gen_goto_tb(s, 1, a->imm); + return true; } /* Test and branch (immediate) @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) static void disas_b_exc_sys(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 7)) { - case 0x1a: case 0x5a: /* Compare & branch (immediate) */ - disas_comp_b_imm(s, insn); - break; case 0x1b: case 0x5b: /* Test & branch (immediate) */ disas_test_b_imm(s, insn); break; -- 2.34.1 Convert the test-and-branch-immediate insns TBZ and TBNZ to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-16-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 6 ++++++ target/arm/tcg/translate-a64.c | 25 +++++-------------------- 2 files changed, 11 insertions(+), 20 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ BL 1 00101 .......................... @branch &cbz rt imm sf nz CBZ sf:1 011010 nz:1 ................... rt:5 &cbz imm=%imm19 + +%imm14 5:s14 !function=times_4 +%imm31_19 31:1 19:5 +&tbz rt imm nz bitpos + +TBZ . 011011 nz:1 ..... .............. rt:5 &tbz imm=%imm14 bitpos=%imm31_19 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_CBZ(DisasContext *s, arg_cbz *a) return true; } -/* Test and branch (immediate) - * 31 30 25 24 23 19 18 5 4 0 - * +----+-------------+----+-------+-------------+------+ - * | b5 | 0 1 1 0 1 1 | op | b40 | imm14 | Rt | - * +----+-------------+----+-------+-------------+------+ - */ -static void disas_test_b_imm(DisasContext *s, uint32_t insn) +static bool trans_TBZ(DisasContext *s, arg_tbz *a) { - unsigned int bit_pos, op, rt; - int64_t diff; DisasLabel match; TCGv_i64 tcg_cmp; - bit_pos = (extract32(insn, 31, 1) << 5) | extract32(insn, 19, 5); - op = extract32(insn, 24, 1); /* 0: TBZ; 1: TBNZ */ - diff = sextract32(insn, 5, 14) * 4; - rt = extract32(insn, 0, 5); - tcg_cmp = tcg_temp_new_i64(); - tcg_gen_andi_i64(tcg_cmp, cpu_reg(s, rt), (1ULL << bit_pos)); + tcg_gen_andi_i64(tcg_cmp, cpu_reg(s, a->rt), 1ULL << a->bitpos); reset_btype(s); match = gen_disas_label(s); - tcg_gen_brcondi_i64(op ? TCG_COND_NE : TCG_COND_EQ, + tcg_gen_brcondi_i64(a->nz ? TCG_COND_NE : TCG_COND_EQ, tcg_cmp, 0, match.label); gen_goto_tb(s, 0, 4); set_disas_label(s, match); - gen_goto_tb(s, 1, diff); + gen_goto_tb(s, 1, a->imm); + return true; } /* Conditional branch (immediate) @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) static void disas_b_exc_sys(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 7)) { - case 0x1b: case 0x5b: /* Test & branch (immediate) */ - disas_test_b_imm(s, insn); - break; case 0x2a: /* Conditional branch (immediate) */ disas_cond_b_imm(s, insn); break; -- 2.34.1 Convert the immediate conditional branch insn B.cond to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-17-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 2 ++ target/arm/tcg/translate-a64.c | 30 ++++++------------------------ 2 files changed, 8 insertions(+), 24 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ CBZ sf:1 011010 nz:1 ................... rt:5 &cbz imm=%imm19 &tbz rt imm nz bitpos TBZ . 011011 nz:1 ..... .............. rt:5 &tbz imm=%imm14 bitpos=%imm31_19 + +B_cond 0101010 0 ................... 0 cond:4 imm=%imm19 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_TBZ(DisasContext *s, arg_tbz *a) return true; } -/* Conditional branch (immediate) - * 31 25 24 23 5 4 3 0 - * +---------------+----+---------------------+----+------+ - * | 0 1 0 1 0 1 0 | o1 | imm19 | o0 | cond | - * +---------------+----+---------------------+----+------+ - */ -static void disas_cond_b_imm(DisasContext *s, uint32_t insn) +static bool trans_B_cond(DisasContext *s, arg_B_cond *a) { - unsigned int cond; - int64_t diff; - - if ((insn & (1 << 4)) || (insn & (1 << 24))) { - unallocated_encoding(s); - return; - } - diff = sextract32(insn, 5, 19) * 4; - cond = extract32(insn, 0, 4); - reset_btype(s); - if (cond < 0x0e) { + if (a->cond < 0x0e) { /* genuinely conditional branches */ DisasLabel match = gen_disas_label(s); - arm_gen_test_cc(cond, match.label); + arm_gen_test_cc(a->cond, match.label); gen_goto_tb(s, 0, 4); set_disas_label(s, match); - gen_goto_tb(s, 1, diff); + gen_goto_tb(s, 1, a->imm); } else { /* 0xe and 0xf are both "always" conditions */ - gen_goto_tb(s, 0, diff); + gen_goto_tb(s, 0, a->imm); } + return true; } /* HINT instruction group, including various allocated HINTs */ @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) static void disas_b_exc_sys(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 7)) { - case 0x2a: /* Conditional branch (immediate) */ - disas_cond_b_imm(s, insn); - break; case 0x6a: /* Exception generation / System */ if (insn & (1 << 24)) { if (extract32(insn, 22, 2) == 0) { -- 2.34.1 Convert the simple (non-pointer-auth) BR, BLR and RET insns to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-18-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 5 ++++ target/arm/tcg/translate-a64.c | 55 ++++++++++++++++++++++++++++++---- 2 files changed, 54 insertions(+), 6 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ # This file is processed by scripts/decodetree.py # +&r rn &ri rd imm &rri_sf rd rn imm sf &i imm @@ -XXX,XX +XXX,XX @@ CBZ sf:1 011010 nz:1 ................... rt:5 &cbz imm=%imm19 TBZ . 011011 nz:1 ..... .............. rt:5 &tbz imm=%imm14 bitpos=%imm31_19 B_cond 0101010 0 ................... 0 cond:4 imm=%imm19 + +BR 1101011 0000 11111 000000 rn:5 00000 &r +BLR 1101011 0001 11111 000000 rn:5 00000 &r +RET 1101011 0010 11111 000000 rn:5 00000 &r diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_B_cond(DisasContext *s, arg_B_cond *a) return true; } +static void set_btype_for_br(DisasContext *s, int rn) +{ + if (dc_isar_feature(aa64_bti, s)) { + /* BR to {x16,x17} or !guard -> 1, else 3. */ + set_btype(s, rn == 16 || rn == 17 || !s->guarded_page ? 1 : 3); + } +} + +static void set_btype_for_blr(DisasContext *s) +{ + if (dc_isar_feature(aa64_bti, s)) { + /* BLR sets BTYPE to 2, regardless of source guarded page. */ + set_btype(s, 2); + } +} + +static bool trans_BR(DisasContext *s, arg_r *a) +{ + gen_a64_set_pc(s, cpu_reg(s, a->rn)); + set_btype_for_br(s, a->rn); + s->base.is_jmp = DISAS_JUMP; + return true; +} + +static bool trans_BLR(DisasContext *s, arg_r *a) +{ + TCGv_i64 dst = cpu_reg(s, a->rn); + TCGv_i64 lr = cpu_reg(s, 30); + if (dst == lr) { + TCGv_i64 tmp = tcg_temp_new_i64(); + tcg_gen_mov_i64(tmp, dst); + dst = tmp; + } + gen_pc_plus_diff(s, lr, curr_insn_len(s)); + gen_a64_set_pc(s, dst); + set_btype_for_blr(s); + s->base.is_jmp = DISAS_JUMP; + return true; +} + +static bool trans_RET(DisasContext *s, arg_r *a) +{ + gen_a64_set_pc(s, cpu_reg(s, a->rn)); + s->base.is_jmp = DISAS_JUMP; + return true; +} + /* HINT instruction group, including various allocated HINTs */ static void handle_hint(DisasContext *s, uint32_t insn, unsigned int op1, unsigned int op2, unsigned int crm) @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) btype_mod = opc; switch (op3) { case 0: - /* BR, BLR, RET */ - if (op4 != 0) { - goto do_unallocated; - } - dst = cpu_reg(s, rn); - break; + /* BR, BLR, RET : handled in decodetree */ + goto do_unallocated; case 2: case 3: -- 2.34.1 Convert the single-register pointer-authentication variants of BR, BLR, RET to decodetree. (BRAA/BLRAA are in a different branch of the legacy decoder and will be dealt with in the next commit.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-19-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 7 ++ target/arm/tcg/translate-a64.c | 132 +++++++++++++++++++-------------- 2 files changed, 84 insertions(+), 55 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ B_cond 0101010 0 ................... 0 cond:4 imm=%imm19 BR 1101011 0000 11111 000000 rn:5 00000 &r BLR 1101011 0001 11111 000000 rn:5 00000 &r RET 1101011 0010 11111 000000 rn:5 00000 &r + +&braz rn m +BRAZ 1101011 0000 11111 00001 m:1 rn:5 11111 &braz # BRAAZ, BRABZ +BLRAZ 1101011 0001 11111 00001 m:1 rn:5 11111 &braz # BLRAAZ, BLRABZ + +&reta m +RETA 1101011 0010 11111 00001 m:1 11111 11111 &reta # RETAA, RETAB diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_RET(DisasContext *s, arg_r *a) return true; } +static TCGv_i64 auth_branch_target(DisasContext *s, TCGv_i64 dst, + TCGv_i64 modifier, bool use_key_a) +{ + TCGv_i64 truedst; + /* + * Return the branch target for a BRAA/RETA/etc, which is either + * just the destination dst, or that value with the pauth check + * done and the code removed from the high bits. + */ + if (!s->pauth_active) { + return dst; + } + + truedst = tcg_temp_new_i64(); + if (use_key_a) { + gen_helper_autia(truedst, cpu_env, dst, modifier); + } else { + gen_helper_autib(truedst, cpu_env, dst, modifier); + } + return truedst; +} + +static bool trans_BRAZ(DisasContext *s, arg_braz *a) +{ + TCGv_i64 dst; + + if (!dc_isar_feature(aa64_pauth, s)) { + return false; + } + + dst = auth_branch_target(s, cpu_reg(s, a->rn), tcg_constant_i64(0), !a->m); + gen_a64_set_pc(s, dst); + set_btype_for_br(s, a->rn); + s->base.is_jmp = DISAS_JUMP; + return true; +} + +static bool trans_BLRAZ(DisasContext *s, arg_braz *a) +{ + TCGv_i64 dst, lr; + + if (!dc_isar_feature(aa64_pauth, s)) { + return false; + } + + dst = auth_branch_target(s, cpu_reg(s, a->rn), tcg_constant_i64(0), !a->m); + lr = cpu_reg(s, 30); + if (dst == lr) { + TCGv_i64 tmp = tcg_temp_new_i64(); + tcg_gen_mov_i64(tmp, dst); + dst = tmp; + } + gen_pc_plus_diff(s, lr, curr_insn_len(s)); + gen_a64_set_pc(s, dst); + set_btype_for_blr(s); + s->base.is_jmp = DISAS_JUMP; + return true; +} + +static bool trans_RETA(DisasContext *s, arg_reta *a) +{ + TCGv_i64 dst; + + dst = auth_branch_target(s, cpu_reg(s, 30), cpu_X[31], !a->m); + gen_a64_set_pc(s, dst); + s->base.is_jmp = DISAS_JUMP; + return true; +} + /* HINT instruction group, including various allocated HINTs */ static void handle_hint(DisasContext *s, uint32_t insn, unsigned int op1, unsigned int op2, unsigned int crm) @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) } switch (opc) { - case 0: /* BR */ - case 1: /* BLR */ - case 2: /* RET */ - btype_mod = opc; - switch (op3) { - case 0: - /* BR, BLR, RET : handled in decodetree */ - goto do_unallocated; - - case 2: - case 3: - if (!dc_isar_feature(aa64_pauth, s)) { - goto do_unallocated; - } - if (opc == 2) { - /* RETAA, RETAB */ - if (rn != 0x1f || op4 != 0x1f) { - goto do_unallocated; - } - rn = 30; - modifier = cpu_X[31]; - } else { - /* BRAAZ, BRABZ, BLRAAZ, BLRABZ */ - if (op4 != 0x1f) { - goto do_unallocated; - } - modifier = tcg_constant_i64(0); - } - if (s->pauth_active) { - dst = tcg_temp_new_i64(); - if (op3 == 2) { - gen_helper_autia(dst, cpu_env, cpu_reg(s, rn), modifier); - } else { - gen_helper_autib(dst, cpu_env, cpu_reg(s, rn), modifier); - } - } else { - dst = cpu_reg(s, rn); - } - break; - - default: - goto do_unallocated; - } - /* BLR also needs to load return address */ - if (opc == 1) { - TCGv_i64 lr = cpu_reg(s, 30); - if (dst == lr) { - TCGv_i64 tmp = tcg_temp_new_i64(); - tcg_gen_mov_i64(tmp, dst); - dst = tmp; - } - gen_pc_plus_diff(s, lr, curr_insn_len(s)); - } - gen_a64_set_pc(s, dst); - break; + case 0: + case 1: + case 2: + /* + * BR, BLR, RET, RETAA, RETAB, BRAAZ, BRABZ, BLRAAZ, BLRABZ: + * handled in decodetree + */ + goto do_unallocated; case 8: /* BRAA */ case 9: /* BLRAA */ -- 2.34.1 Convert the last four BR-with-pointer-auth insns to decodetree. The remaining cases in the outer switch in disas_uncond_b_reg() all return early rather than leaving the case statement, so we can delete the now-unused code at the end of that function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-20-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 4 ++ target/arm/tcg/translate-a64.c | 97 ++++++++++++++-------------------- 2 files changed, 43 insertions(+), 58 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ BLRAZ 1101011 0001 11111 00001 m:1 rn:5 11111 &braz # BLRAAZ, BLRABZ &reta m RETA 1101011 0010 11111 00001 m:1 11111 11111 &reta # RETAA, RETAB + +&bra rn rm m +BRA 1101011 1000 11111 00001 m:1 rn:5 rm:5 &bra # BRAA, BRAB +BLRA 1101011 1001 11111 00001 m:1 rn:5 rm:5 &bra # BLRAA, BLRAB diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_RETA(DisasContext *s, arg_reta *a) return true; } +static bool trans_BRA(DisasContext *s, arg_bra *a) +{ + TCGv_i64 dst; + + if (!dc_isar_feature(aa64_pauth, s)) { + return false; + } + dst = auth_branch_target(s, cpu_reg(s,a->rn), cpu_reg_sp(s, a->rm), !a->m); + gen_a64_set_pc(s, dst); + set_btype_for_br(s, a->rn); + s->base.is_jmp = DISAS_JUMP; + return true; +} + +static bool trans_BLRA(DisasContext *s, arg_bra *a) +{ + TCGv_i64 dst, lr; + + if (!dc_isar_feature(aa64_pauth, s)) { + return false; + } + dst = auth_branch_target(s, cpu_reg(s, a->rn), cpu_reg_sp(s, a->rm), !a->m); + lr = cpu_reg(s, 30); + if (dst == lr) { + TCGv_i64 tmp = tcg_temp_new_i64(); + tcg_gen_mov_i64(tmp, dst); + dst = tmp; + } + gen_pc_plus_diff(s, lr, curr_insn_len(s)); + gen_a64_set_pc(s, dst); + set_btype_for_blr(s); + s->base.is_jmp = DISAS_JUMP; + return true; +} + /* HINT instruction group, including various allocated HINTs */ static void handle_hint(DisasContext *s, uint32_t insn, unsigned int op1, unsigned int op2, unsigned int crm) @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) { unsigned int opc, op2, op3, rn, op4; - unsigned btype_mod = 2; /* 0: BR, 1: BLR, 2: other */ TCGv_i64 dst; TCGv_i64 modifier; @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) case 0: case 1: case 2: + case 8: + case 9: /* - * BR, BLR, RET, RETAA, RETAB, BRAAZ, BRABZ, BLRAAZ, BLRABZ: - * handled in decodetree + * BR, BLR, RET, RETAA, RETAB, BRAAZ, BRABZ, BLRAAZ, BLRABZ, + * BRAA, BLRAA: handled in decodetree */ goto do_unallocated; - case 8: /* BRAA */ - case 9: /* BLRAA */ - if (!dc_isar_feature(aa64_pauth, s)) { - goto do_unallocated; - } - if ((op3 & ~1) != 2) { - goto do_unallocated; - } - btype_mod = opc & 1; - if (s->pauth_active) { - dst = tcg_temp_new_i64(); - modifier = cpu_reg_sp(s, op4); - if (op3 == 2) { - gen_helper_autia(dst, cpu_env, cpu_reg(s, rn), modifier); - } else { - gen_helper_autib(dst, cpu_env, cpu_reg(s, rn), modifier); - } - } else { - dst = cpu_reg(s, rn); - } - /* BLRAA also needs to load return address */ - if (opc == 9) { - TCGv_i64 lr = cpu_reg(s, 30); - if (dst == lr) { - TCGv_i64 tmp = tcg_temp_new_i64(); - tcg_gen_mov_i64(tmp, dst); - dst = tmp; - } - gen_pc_plus_diff(s, lr, curr_insn_len(s)); - } - gen_a64_set_pc(s, dst); - break; - case 4: /* ERET */ if (s->current_el == 0) { goto do_unallocated; @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } - - switch (btype_mod) { - case 0: /* BR */ - if (dc_isar_feature(aa64_bti, s)) { - /* BR to {x16,x17} or !guard -> 1, else 3. */ - set_btype(s, rn == 16 || rn == 17 || !s->guarded_page ? 1 : 3); - } - break; - - case 1: /* BLR */ - if (dc_isar_feature(aa64_bti, s)) { - /* BLR sets BTYPE to 2, regardless of source guarded page. */ - set_btype(s, 2); - } - break; - - default: /* RET or none of the above. */ - /* BTYPE will be set to 0 by normal end-of-insn processing. */ - break; - } - - s->base.is_jmp = DISAS_JUMP; } /* Branches, exception generating and system instructions */ -- 2.34.1 Convert the exception-return insns ERET, ERETA and ERETB to decodetree. These were the last insns left in the legacy decoder function disas_uncond_reg_b(), which allows us to remove it. The old decoder explicitly decoded the DRPS instruction, only in order to call unallocated_encoding() on it, exactly as would have happened if it hadn't decoded it. This is because this insn always UNDEFs unless the CPU is in halting-debug state, which we don't emulate. So we list the pattern in a comment in a64.decode, but don't actively decode it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512144106.3608981-21-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 8 ++ target/arm/tcg/translate-a64.c | 163 +++++++++++---------------------- 2 files changed, 63 insertions(+), 108 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ RETA 1101011 0010 11111 00001 m:1 11111 11111 &reta # RETAA, RETAB &bra rn rm m BRA 1101011 1000 11111 00001 m:1 rn:5 rm:5 &bra # BRAA, BRAB BLRA 1101011 1001 11111 00001 m:1 rn:5 rm:5 &bra # BLRAA, BLRAB + +ERET 1101011 0100 11111 000000 11111 00000 +ERETA 1101011 0100 11111 00001 m:1 11111 11111 &reta # ERETAA, ERETAB + +# We don't need to decode DRPS because it always UNDEFs except when +# the processor is in halting debug state (which we don't implement). +# The pattern is listed here as documentation. +# DRPS 1101011 0101 11111 000000 11111 00000 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_BLRA(DisasContext *s, arg_bra *a) return true; } +static bool trans_ERET(DisasContext *s, arg_ERET *a) +{ + TCGv_i64 dst; + + if (s->current_el == 0) { + return false; + } + if (s->fgt_eret) { + gen_exception_insn_el(s, 0, EXCP_UDEF, 0, 2); + return true; + } + dst = tcg_temp_new_i64(); + tcg_gen_ld_i64(dst, cpu_env, + offsetof(CPUARMState, elr_el[s->current_el])); + + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + + gen_helper_exception_return(cpu_env, dst); + /* Must exit loop to check un-masked IRQs */ + s->base.is_jmp = DISAS_EXIT; + return true; +} + +static bool trans_ERETA(DisasContext *s, arg_reta *a) +{ + TCGv_i64 dst; + + if (!dc_isar_feature(aa64_pauth, s)) { + return false; + } + if (s->current_el == 0) { + return false; + } + /* The FGT trap takes precedence over an auth trap. */ + if (s->fgt_eret) { + gen_exception_insn_el(s, 0, EXCP_UDEF, a->m ? 3 : 2, 2); + return true; + } + dst = tcg_temp_new_i64(); + tcg_gen_ld_i64(dst, cpu_env, + offsetof(CPUARMState, elr_el[s->current_el])); + + dst = auth_branch_target(s, dst, cpu_X[31], !a->m); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + + gen_helper_exception_return(cpu_env, dst); + /* Must exit loop to check un-masked IRQs */ + s->base.is_jmp = DISAS_EXIT; + return true; +} + /* HINT instruction group, including various allocated HINTs */ static void handle_hint(DisasContext *s, uint32_t insn, unsigned int op1, unsigned int op2, unsigned int crm) @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) } } -/* Unconditional branch (register) - * 31 25 24 21 20 16 15 10 9 5 4 0 - * +---------------+-------+-------+-------+------+-------+ - * | 1 1 0 1 0 1 1 | opc | op2 | op3 | Rn | op4 | - * +---------------+-------+-------+-------+------+-------+ - */ -static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) -{ - unsigned int opc, op2, op3, rn, op4; - TCGv_i64 dst; - TCGv_i64 modifier; - - opc = extract32(insn, 21, 4); - op2 = extract32(insn, 16, 5); - op3 = extract32(insn, 10, 6); - rn = extract32(insn, 5, 5); - op4 = extract32(insn, 0, 5); - - if (op2 != 0x1f) { - goto do_unallocated; - } - - switch (opc) { - case 0: - case 1: - case 2: - case 8: - case 9: - /* - * BR, BLR, RET, RETAA, RETAB, BRAAZ, BRABZ, BLRAAZ, BLRABZ, - * BRAA, BLRAA: handled in decodetree - */ - goto do_unallocated; - - case 4: /* ERET */ - if (s->current_el == 0) { - goto do_unallocated; - } - switch (op3) { - case 0: /* ERET */ - if (op4 != 0) { - goto do_unallocated; - } - if (s->fgt_eret) { - gen_exception_insn_el(s, 0, EXCP_UDEF, syn_erettrap(op3), 2); - return; - } - dst = tcg_temp_new_i64(); - tcg_gen_ld_i64(dst, cpu_env, - offsetof(CPUARMState, elr_el[s->current_el])); - break; - - case 2: /* ERETAA */ - case 3: /* ERETAB */ - if (!dc_isar_feature(aa64_pauth, s)) { - goto do_unallocated; - } - if (rn != 0x1f || op4 != 0x1f) { - goto do_unallocated; - } - /* The FGT trap takes precedence over an auth trap. */ - if (s->fgt_eret) { - gen_exception_insn_el(s, 0, EXCP_UDEF, syn_erettrap(op3), 2); - return; - } - dst = tcg_temp_new_i64(); - tcg_gen_ld_i64(dst, cpu_env, - offsetof(CPUARMState, elr_el[s->current_el])); - if (s->pauth_active) { - modifier = cpu_X[31]; - if (op3 == 2) { - gen_helper_autia(dst, cpu_env, dst, modifier); - } else { - gen_helper_autib(dst, cpu_env, dst, modifier); - } - } - break; - - default: - goto do_unallocated; - } - if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { - gen_io_start(); - } - - gen_helper_exception_return(cpu_env, dst); - /* Must exit loop to check un-masked IRQs */ - s->base.is_jmp = DISAS_EXIT; - return; - - case 5: /* DRPS */ - if (op3 != 0 || op4 != 0 || rn != 0x1f) { - goto do_unallocated; - } else { - unallocated_encoding(s); - } - return; - - default: - do_unallocated: - unallocated_encoding(s); - return; - } -} - /* Branches, exception generating and system instructions */ static void disas_b_exc_sys(DisasContext *s, uint32_t insn) { @@ -XXX,XX +XXX,XX @@ static void disas_b_exc_sys(DisasContext *s, uint32_t insn) disas_exc(s, insn); } break; - case 0x6b: /* Unconditional branch (register) */ - disas_uncond_b_reg(s, insn); - break; default: unallocated_encoding(s); break; -- 2.34.1 The IMPDEF sysreg L2CTLR_EL1 found on the Cortex-A35, A53, A57, A72 and which we (arguably dubiously) also provide in '-cpu max' has a 2 bit field for the number of processors in the cluster. On real hardware this must be sufficient because it can only be configured with up to 4 CPUs in the cluster. However on QEMU if the board code does not explicitly configure the code into clusters with the right CPU count we default to "give the value assuming that all CPUs in the system are in a single cluster", which might be too big to fit in the field. Instead of just overflowing this 2-bit field, saturate to 3 (meaning "4 CPUs", so at least we don't overwrite other fields in the register. It's unlikely that any guest code really cares about the value in this field; at least, if it does it probably also wants the system to be more closely matching real hardware, i.e. not to have more than 4 CPUs. This issue has been present since the L2CTLR was first added in commit 377a44ec8f2fac5b back in 2014. It was only noticed because Coverity complains (CID 1509227) that the shift might overflow 32 bits and inadvertently sign extend into the top half of the 64 bit value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230512170223.3801643-2-peter.maydell@linaro.org --- target/arm/cortex-regs.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/target/arm/cortex-regs.c b/target/arm/cortex-regs.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cortex-regs.c +++ b/target/arm/cortex-regs.c @@ -XXX,XX +XXX,XX @@ static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); - /* Number of cores is in [25:24]; otherwise we RAZ */ - return (cpu->core_count - 1) << 24; + /* + * Number of cores is in [25:24]; otherwise we RAZ. + * If the board didn't configure the CPUs into clusters, + * we default to "all CPUs in one cluster", which might be + * more than the 4 that the hardware permits and which is + * all you can report in this two-bit field. Saturate to + * 0b11 (== 4 CPUs) rather than overflowing the field. + */ + return MIN(cpu->core_count - 1, 3) << 24; } static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { -- 2.34.1 In the vexpress board code, we allocate a new MemoryRegion at the top of vexpress_common_init() but only set it up and use it inside the "if (map[VE_NORFLASHALIAS] != -1)" conditional, so we leak it if not. This isn't a very interesting leak as it's a tiny amount of memory once at startup, but it's easy to fix. We could silence Coverity simply by moving the g_new() into the if() block, but this use of g_new(MemoryRegion, 1) is a legacy from when this board model was originally written; we wouldn't do that if we wrote it today. The MemoryRegions are conceptually a part of the board and must not go away until the whole board is done with (at the end of the simulation), so they belong in its state struct. This machine already has a VexpressMachineState struct that extends MachineState, so statically put the MemoryRegions in there instead of dynamically allocating them separately at runtime. Spotted by Coverity (CID 1509083). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230512170223.3801643-3-peter.maydell@linaro.org --- hw/arm/vexpress.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ struct VexpressMachineClass { struct VexpressMachineState { MachineState parent; + MemoryRegion vram; + MemoryRegion sram; + MemoryRegion flashalias; + MemoryRegion lowram; + MemoryRegion a15sram; bool secure; bool virt; }; @@ -XXX,XX +XXX,XX @@ struct VexpressMachineState { #define TYPE_VEXPRESS_A15_MACHINE MACHINE_TYPE_NAME("vexpress-a15") OBJECT_DECLARE_TYPE(VexpressMachineState, VexpressMachineClass, VEXPRESS_MACHINE) -typedef void DBoardInitFn(const VexpressMachineState *machine, +typedef void DBoardInitFn(VexpressMachineState *machine, ram_addr_t ram_size, const char *cpu_type, qemu_irq *pic); @@ -XXX,XX +XXX,XX @@ static void init_cpus(MachineState *ms, const char *cpu_type, } } -static void a9_daughterboard_init(const VexpressMachineState *vms, +static void a9_daughterboard_init(VexpressMachineState *vms, ram_addr_t ram_size, const char *cpu_type, qemu_irq *pic) { MachineState *machine = MACHINE(vms); MemoryRegion *sysmem = get_system_memory(); - MemoryRegion *lowram = g_new(MemoryRegion, 1); ram_addr_t low_ram_size; if (ram_size > 0x40000000) { @@ -XXX,XX +XXX,XX @@ static void a9_daughterboard_init(const VexpressMachineState *vms, * address space should in theory be remappable to various * things including ROM or RAM; we always map the RAM there. */ - memory_region_init_alias(lowram, NULL, "vexpress.lowmem", machine->ram, - 0, low_ram_size); - memory_region_add_subregion(sysmem, 0x0, lowram); + memory_region_init_alias(&vms->lowram, NULL, "vexpress.lowmem", + machine->ram, 0, low_ram_size); + memory_region_add_subregion(sysmem, 0x0, &vms->lowram); memory_region_add_subregion(sysmem, 0x60000000, machine->ram); /* 0x1e000000 A9MPCore (SCU) private memory region */ @@ -XXX,XX +XXX,XX @@ static VEDBoardInfo a9_daughterboard = { .init = a9_daughterboard_init, }; -static void a15_daughterboard_init(const VexpressMachineState *vms, +static void a15_daughterboard_init(VexpressMachineState *vms, ram_addr_t ram_size, const char *cpu_type, qemu_irq *pic) { MachineState *machine = MACHINE(vms); MemoryRegion *sysmem = get_system_memory(); - MemoryRegion *sram = g_new(MemoryRegion, 1); { /* We have to use a separate 64 bit variable here to avoid the gcc @@ -XXX,XX +XXX,XX @@ static void a15_daughterboard_init(const VexpressMachineState *vms, /* 0x2b060000: SP805 watchdog: not modelled */ /* 0x2b0a0000: PL341 dynamic memory controller: not modelled */ /* 0x2e000000: system SRAM */ - memory_region_init_ram(sram, NULL, "vexpress.a15sram", 0x10000, + memory_region_init_ram(&vms->a15sram, NULL, "vexpress.a15sram", 0x10000, &error_fatal); - memory_region_add_subregion(sysmem, 0x2e000000, sram); + memory_region_add_subregion(sysmem, 0x2e000000, &vms->a15sram); /* 0x7ffb0000: DMA330 DMA controller: not modelled */ /* 0x7ffd0000: PL354 static memory controller: not modelled */ @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) I2CBus *i2c; ram_addr_t vram_size, sram_size; MemoryRegion *sysmem = get_system_memory(); - MemoryRegion *vram = g_new(MemoryRegion, 1); - MemoryRegion *sram = g_new(MemoryRegion, 1); - MemoryRegion *flashalias = g_new(MemoryRegion, 1); - MemoryRegion *flash0mem; const hwaddr *map = daughterboard->motherboard_map; int i; @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) if (map[VE_NORFLASHALIAS] != -1) { /* Map flash 0 as an alias into low memory */ + MemoryRegion *flash0mem; flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0); - memory_region_init_alias(flashalias, NULL, "vexpress.flashalias", + memory_region_init_alias(&vms->flashalias, NULL, "vexpress.flashalias", flash0mem, 0, VEXPRESS_FLASH_SIZE); - memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias); + memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], &vms->flashalias); } dinfo = drive_get(IF_PFLASH, 0, 1); ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", dinfo); sram_size = 0x2000000; - memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size, + memory_region_init_ram(&vms->sram, NULL, "vexpress.sram", sram_size, &error_fatal); - memory_region_add_subregion(sysmem, map[VE_SRAM], sram); + memory_region_add_subregion(sysmem, map[VE_SRAM], &vms->sram); vram_size = 0x800000; - memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size, + memory_region_init_ram(&vms->vram, NULL, "vexpress.vram", vram_size, &error_fatal); - memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram); + memory_region_add_subregion(sysmem, map[VE_VIDEORAM], &vms->vram); /* 0x4e000000 LAN9118 Ethernet */ if (nd_table[0].used) { -- 2.34.1 Convert the u2f.txt file to rST, and place it in the right place in our manual layout. The old text didn't fit very well into our manual style, so the new version ends up looking like a rewrite, although some of the original text is preserved: * the 'building' section of the old file is removed, since we generally assume that users have already built QEMU * some rather verbose text has been cut back * document the passthrough device first, on the assumption that's most likely to be of interest to users * cut back on the duplication of text between sections * format example command lines etc with rST As it's a short document it seemed simplest to do this all in one go rather than try to do a minimal syntactic conversion and then clean up the wording and layout. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230421163734.1152076-1-peter.maydell@linaro.org --- docs/system/device-emulation.rst | 1 + docs/system/devices/usb-u2f.rst | 93 ++++++++++++++++++++++++++ docs/system/devices/usb.rst | 2 +- docs/u2f.txt | 110 ------------------------------- 4 files changed, 95 insertions(+), 111 deletions(-) create mode 100644 docs/system/devices/usb-u2f.rst delete mode 100644 docs/u2f.txt diff --git a/docs/system/device-emulation.rst b/docs/system/device-emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/device-emulation.rst +++ b/docs/system/device-emulation.rst @@ -XXX,XX +XXX,XX @@ Emulated Devices devices/virtio-pmem.rst devices/vhost-user-rng.rst devices/canokey.rst + devices/usb-u2f.rst devices/igb.rst diff --git a/docs/system/devices/usb-u2f.rst b/docs/system/devices/usb-u2f.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/devices/usb-u2f.rst @@ -XXX,XX +XXX,XX @@ +Universal Second Factor (U2F) USB Key Device +============================================ + +U2F is an open authentication standard that enables relying parties +exposed to the internet to offer a strong second factor option for end +user authentication. + +The second factor is provided by a device implementing the U2F +protocol. In case of a USB U2F security key, it is a USB HID device +that implements the U2F protocol. + +QEMU supports both pass-through of a host U2F key device to a VM, +and software emulation of a U2F key. + +``u2f-passthru`` +---------------- + +The ``u2f-passthru`` device allows you to connect a real hardware +U2F key on your host to a guest VM. All requests made from the guest +are passed through to the physical security key connected to the +host machine and vice versa. + +In addition, the dedicated pass-through allows you to share a single +U2F security key with several guest VMs, which is not possible with a +simple host device assignment pass-through. + +You can specify the host U2F key to use with the ``hidraw`` +option, which takes the host path to a Linux ``/dev/hidrawN`` device: + +.. parsed-literal:: + |qemu_system| -usb -device u2f-passthru,hidraw=/dev/hidraw0 + +If you don't specify the device, the ``u2f-passthru`` device will +autoscan to take the first U2F device it finds on the host (this +requires a working libudev): + +.. parsed-literal:: + |qemu_system| -usb -device u2f-passthru + +``u2f-emulated`` +---------------- + +``u2f-emulated`` is a completely software emulated U2F device. +It uses `libu2f-emu <https://github.com/MattGorko/libu2f-emu>`__ +for the U2F key emulation. libu2f-emu +provides a complete implementation of the U2F protocol device part for +all specified transports given by the FIDO Alliance. + +To work, an emulated U2F device must have four elements: + + * ec x509 certificate + * ec private key + * counter (four bytes value) + * 48 bytes of entropy (random bits) + +To use this type of device, these have to be configured, and these +four elements must be passed one way or another. + +Assuming that you have a working libu2f-emu installed on the host, +there are three possible ways to configure the ``u2f-emulated`` device: + + * ephemeral + * setup directory + * manual + +Ephemeral is the simplest way to configure; it lets the device generate +all the elements it needs for a single use of the lifetime of the device. +It is the default if you do not pass any other options to the device. + +.. parsed-literal:: + |qemu_system| -usb -device u2f-emulated + +You can pass the device the path of a setup directory on the host +using the ``dir`` option; the directory must contain these four files: + + * ``certificate.pem``: ec x509 certificate + * ``private-key.pem``: ec private key + * ``counter``: counter value + * ``entropy``: 48 bytes of entropy + +.. parsed-literal:: + |qemu_system| -usb -device u2f-emulated,dir=$dir + +You can also manually pass the device the paths to each of these files, +if you don't want them all to be in the same directory, using the options + + * ``cert`` + * ``priv`` + * ``counter`` + * ``entropy`` + +.. parsed-literal:: + |qemu_system| -usb -device u2f-emulated,cert=$DIR1/$FILE1,priv=$DIR2/$FILE2,counter=$DIR3/$FILE3,entropy=$DIR4/$FILE4 diff --git a/docs/system/devices/usb.rst b/docs/system/devices/usb.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/devices/usb.rst +++ b/docs/system/devices/usb.rst @@ -XXX,XX +XXX,XX @@ option or the ``device_add`` monitor command. Available devices are: USB audio device ``u2f-{emulated,passthru}`` - Universal Second Factor device + :doc:`usb-u2f` ``canokey`` An Open-source Secure Key implementing FIDO2, OpenPGP, PIV and more. diff --git a/docs/u2f.txt b/docs/u2f.txt deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/u2f.txt +++ /dev/null @@ -XXX,XX +XXX,XX @@ -QEMU U2F Key Device Documentation. - -Contents -1. USB U2F key device -2. Building -3. Using u2f-emulated -4. Using u2f-passthru -5. Libu2f-emu - -1. USB U2F key device - -U2F is an open authentication standard that enables relying parties -exposed to the internet to offer a strong second factor option for end -user authentication. - -The standard brings many advantages to both parties, client and server, -allowing to reduce over-reliance on passwords, it increases authentication -security and simplifies passwords. - -The second factor is materialized by a device implementing the U2F -protocol. In case of a USB U2F security key, it is a USB HID device -that implements the U2F protocol. - -In QEMU, the USB U2F key device offers a dedicated support of U2F, allowing -guest USB FIDO/U2F security keys operating in two possible modes: -pass-through and emulated. - -The pass-through mode consists of passing all requests made from the guest -to the physical security key connected to the host machine and vice versa. -In addition, the dedicated pass-through allows to have a U2F security key -shared on several guests which is not possible with a simple host device -assignment pass-through. - -The emulated mode consists of completely emulating the behavior of an -U2F device through software part. Libu2f-emu is used for that. - - -2. Building - -To ensure the build of the u2f-emulated device variant which depends -on libu2f-emu: configuring and building: - - ./configure --enable-u2f && make - -The pass-through mode is built by default on Linux. To take advantage -of the autoscan option it provides, make sure you have a working libudev -installed on the host. - - -3. Using u2f-emulated - -To work, an emulated U2F device must have four elements: - * ec x509 certificate - * ec private key - * counter (four bytes value) - * 48 bytes of entropy (random bits) - -To use this type of device, this one has to be configured, and these -four elements must be passed one way or another. - -Assuming that you have a working libu2f-emu installed on the host. -There are three possible ways of configurations: - * ephemeral - * setup directory - * manual - -Ephemeral is the simplest way to configure, it lets the device generate -all the elements it needs for a single use of the lifetime of the device. - - qemu -usb -device u2f-emulated - -Setup directory allows to configure the device from a directory containing -four files: - * certificate.pem: ec x509 certificate - * private-key.pem: ec private key - * counter: counter value - * entropy: 48 bytes of entropy - - qemu -usb -device u2f-emulated,dir=$dir - -Manual allows to configure the device more finely by specifying each -of the elements necessary for the device: - * cert - * priv - * counter - * entropy - - qemu -usb -device u2f-emulated,cert=$DIR1/$FILE1,priv=$DIR2/$FILE2,counter=$DIR3/$FILE3,entropy=$DIR4/$FILE4 - - -4. Using u2f-passthru - -On the host specify the u2f-passthru device with a suitable hidraw: - - qemu -usb -device u2f-passthru,hidraw=/dev/hidraw0 - -Alternately, the u2f-passthru device can autoscan to take the first -U2F device it finds on the host (this requires a working libudev): - - qemu -usb -device u2f-passthru - - -5. Libu2f-emu - -The u2f-emulated device uses libu2f-emu for the U2F key emulation. Libu2f-emu -implements completely the U2F protocol device part for all specified -transport given by the FIDO Alliance. - -For more information about libu2f-emu see this page: -https://github.com/MattGorko/libu2f-emu. -- 2.34.1