The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 The following changes since commit bf4460a8d9a86f6cfe05d7a7f470c48e3a93d8b2: Merge tag 'pull-tcg-20230123' of https://gitlab.com/rth7680/qemu into staging (2023-02-03 09:30:45 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230203 for you to fetch changes up to bb18151d8bd9bedc497ee9d4e8d81b39a4e5bbf6: target/arm: Enable FEAT_FGT on '-cpu max' (2023-02-03 12:59:24 +0000) ---------------------------------------------------------------- target-arm queue: * Fix physical address resolution for Stage2 * pl011: refactoring, implement reset method * Support GICv3 with hvf acceleration * sbsa-ref: remove cortex-a76 from list of supported cpus * Correct syndrome for ATS12NSO* traps at Secure EL1 * Fix priority of HSTR_EL2 traps vs UNDEFs * Implement FEAT_FGT for '-cpu max' ---------------------------------------------------------------- Alexander Graf (3): hvf: arm: Add support for GICv3 hw/arm/virt: Consolidate GIC finalize logic hw/arm/virt: Make accels in GIC finalize logic explicit Evgeny Iakovlev (4): hw/char/pl011: refactor FIFO depth handling code hw/char/pl011: add post_load hook for backwards-compatibility hw/char/pl011: implement a reset method hw/char/pl011: better handling of FIFO flags on LCR reset Marcin Juszkiewicz (1): sbsa-ref: remove cortex-a76 from list of supported cpus Peter Maydell (23): target/arm: Name AT_S1E1RP and AT_S1E1WP cpregs correctly target/arm: Correct syndrome for ATS12NSO* at Secure EL1 target/arm: Remove CP_ACCESS_TRAP_UNCATEGORIZED_{EL2, EL3} target/arm: Move do_coproc_insn() syndrome calculation earlier target/arm: All UNDEF-at-EL0 traps take priority over HSTR_EL2 traps target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1 target/arm: Disable HSTR_EL2 traps if EL2 is not enabled target/arm: Define the FEAT_FGT registers target/arm: Implement FGT trapping infrastructure target/arm: Mark up sysregs for HFGRTR bits 0..11 target/arm: Mark up sysregs for HFGRTR bits 12..23 target/arm: Mark up sysregs for HFGRTR bits 24..35 target/arm: Mark up sysregs for HFGRTR bits 36..63 target/arm: Mark up sysregs for HDFGRTR bits 0..11 target/arm: Mark up sysregs for HDFGRTR bits 12..63 target/arm: Mark up sysregs for HFGITR bits 0..11 target/arm: Mark up sysregs for HFGITR bits 12..17 target/arm: Mark up sysregs for HFGITR bits 18..47 target/arm: Mark up sysregs for HFGITR bits 48..63 target/arm: Implement the HFGITR_EL2.ERET trap target/arm: Implement the HFGITR_EL2.SVC_EL0 and SVC_EL1 traps target/arm: Implement MDCR_EL2.TDCC and MDCR_EL3.TDCC traps target/arm: Enable FEAT_FGT on '-cpu max' Richard Henderson (2): hw/arm: Use TYPE_ARM_SMMUV3 target/arm: Fix physical address resolution for Stage2 docs/system/arm/emulation.rst | 1 + include/hw/arm/virt.h | 15 +- include/hw/char/pl011.h | 5 +- target/arm/cpregs.h | 484 +++++++++++++++++++++++++++++++++++++++++- target/arm/cpu.h | 18 ++ target/arm/internals.h | 20 ++ target/arm/syndrome.h | 10 + target/arm/translate.h | 6 + hw/arm/sbsa-ref.c | 4 +- hw/arm/virt.c | 203 +++++++++--------- hw/char/pl011.c | 93 ++++++-- hw/intc/arm_gicv3_cpuif.c | 18 +- target/arm/cpu64.c | 1 + target/arm/debug_helper.c | 46 +++- target/arm/helper.c | 245 ++++++++++++++++++++- target/arm/hvf/hvf.c | 151 +++++++++++++ target/arm/op_helper.c | 58 ++++- target/arm/ptw.c | 2 +- target/arm/translate-a64.c | 22 +- target/arm/translate.c | 125 +++++++---- target/arm/hvf/trace-events | 2 + 21 files changed, 1340 insertions(+), 189 deletions(-) From: Richard Henderson <richard.henderson@linaro.org> Use the macro instead of two explicit string literals. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230124232059.4017615-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 3 ++- hw/arm/virt.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "kvm_arm.h" #include "hw/arm/boot.h" +#include "hw/arm/smmuv3.h" #include "hw/block/flash.h" #include "hw/boards.h" #include "hw/ide/internal.h" @@ -XXX,XX +XXX,XX @@ static void create_smmu(const SBSAMachineState *sms, PCIBus *bus) DeviceState *dev; int i; - dev = qdev_new("arm-smmuv3"); + dev = qdev_new(TYPE_ARM_SMMUV3); object_property_set_link(OBJECT(dev), "primary-bus", OBJECT(bus), &error_abort); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_smmu(const VirtMachineState *vms, return; } - dev = qdev_new("arm-smmuv3"); + dev = qdev_new(TYPE_ARM_SMMUV3); object_property_set_link(OBJECT(dev), "primary-bus", OBJECT(bus), &error_abort); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Conversion to probe_access_full missed applying the page offset. Cc: qemu-stable@nongnu.org Reported-by: Sid Manning <sidneym@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230126233134.103193-1-richard.henderson@linaro.org Fixes: f3639a64f602 ("target/arm: Use softmmu tlbs for page table walking") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool S1_ptw_translate(CPUARMState *env, S1Translate *ptw, if (unlikely(flags & TLB_INVALID_MASK)) { goto fail; } - ptw->out_phys = full->phys_addr; + ptw->out_phys = full->phys_addr | (addr & ~TARGET_PAGE_MASK); ptw->out_rw = full->prot & PAGE_WRITE; pte_attrs = full->pte_attrs; pte_secure = full->attrs.secure; -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> PL011 can be in either of 2 modes depending guest config: FIFO and single register. The last mode could be viewed as a 1-element-deep FIFO. Current code open-codes a bunch of depth-dependent logic. Refactor FIFO depth handling code to isolate calculating current FIFO depth. One functional (albeit guest-invisible) side-effect of this change is that previously we would always increment s->read_pos in UARTDR read handler even if FIFO was disabled, now we are limiting read_pos to not exceed FIFO depth (read_pos itself is reset to 0 if user disables FIFO). Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230123162304.26254-2-eiakovlev@linux.microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/pl011.h | 5 ++++- hw/char/pl011.c | 30 ++++++++++++++++++------------ 2 files changed, 22 insertions(+), 13 deletions(-) diff --git a/include/hw/char/pl011.h b/include/hw/char/pl011.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/pl011.h +++ b/include/hw/char/pl011.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(PL011State, PL011) /* This shares the same struct (and cast macro) as the base pl011 device */ #define TYPE_PL011_LUMINARY "pl011_luminary" +/* Depth of UART FIFO in bytes, when FIFO mode is enabled (else depth == 1) */ +#define PL011_FIFO_DEPTH 16 + struct PL011State { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct PL011State { uint32_t dmacr; uint32_t int_enabled; uint32_t int_level; - uint32_t read_fifo[16]; + uint32_t read_fifo[PL011_FIFO_DEPTH]; uint32_t ilpr; uint32_t ibrd; uint32_t fbrd; diff --git a/hw/char/pl011.c b/hw/char/pl011.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/pl011.c +++ b/hw/char/pl011.c @@ -XXX,XX +XXX,XX @@ static void pl011_update(PL011State *s) } } +static bool pl011_is_fifo_enabled(PL011State *s) +{ + return (s->lcr & 0x10) != 0; +} + +static inline unsigned pl011_get_fifo_depth(PL011State *s) +{ + /* Note: FIFO depth is expected to be power-of-2 */ + return pl011_is_fifo_enabled(s) ? PL011_FIFO_DEPTH : 1; +} + static uint64_t pl011_read(void *opaque, hwaddr offset, unsigned size) { @@ -XXX,XX +XXX,XX @@ static uint64_t pl011_read(void *opaque, hwaddr offset, c = s->read_fifo[s->read_pos]; if (s->read_count > 0) { s->read_count--; - if (++s->read_pos == 16) - s->read_pos = 0; + s->read_pos = (s->read_pos + 1) & (pl011_get_fifo_depth(s) - 1); } if (s->read_count == 0) { s->flags |= PL011_FLAG_RXFE; @@ -XXX,XX +XXX,XX @@ static int pl011_can_receive(void *opaque) PL011State *s = (PL011State *)opaque; int r; - if (s->lcr & 0x10) { - r = s->read_count < 16; - } else { - r = s->read_count < 1; - } + r = s->read_count < pl011_get_fifo_depth(s); trace_pl011_can_receive(s->lcr, s->read_count, r); return r; } @@ -XXX,XX +XXX,XX @@ static void pl011_put_fifo(void *opaque, uint32_t value) { PL011State *s = (PL011State *)opaque; int slot; + unsigned pipe_depth; - slot = s->read_pos + s->read_count; - if (slot >= 16) - slot -= 16; + pipe_depth = pl011_get_fifo_depth(s); + slot = (s->read_pos + s->read_count) & (pipe_depth - 1); s->read_fifo[slot] = value; s->read_count++; s->flags &= ~PL011_FLAG_RXFE; trace_pl011_put_fifo(value, s->read_count); - if (!(s->lcr & 0x10) || s->read_count == 16) { + if (s->read_count == pipe_depth) { trace_pl011_put_fifo_full(); s->flags |= PL011_FLAG_RXFF; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pl011 = { VMSTATE_UINT32(dmacr, PL011State), VMSTATE_UINT32(int_enabled, PL011State), VMSTATE_UINT32(int_level, PL011State), - VMSTATE_UINT32_ARRAY(read_fifo, PL011State, 16), + VMSTATE_UINT32_ARRAY(read_fifo, PL011State, PL011_FIFO_DEPTH), VMSTATE_UINT32(ilpr, PL011State), VMSTATE_UINT32(ibrd, PL011State), VMSTATE_UINT32(fbrd, PL011State), -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Previous change slightly modified the way we handle data writes when FIFO is disabled. Previously we kept incrementing read_pos and were storing data at that position, although we only have a single-register-deep FIFO now. Then we changed it to always store data at pos 0. If guest disables FIFO and the proceeds to read data, it will work out fine, because we still read from current read_pos before setting it to 0. However, to make code less fragile, introduce a post_load hook for PL011State and move fixup read FIFO state when FIFO is disabled. Since we are introducing a post_load hook, also do some sanity checking on untrusted incoming input state. Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Message-id: 20230123162304.26254-3-eiakovlev@linux.microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/pl011.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/hw/char/pl011.c b/hw/char/pl011.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/pl011.c +++ b/hw/char/pl011.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pl011_clock = { } }; +static int pl011_post_load(void *opaque, int version_id) +{ + PL011State* s = opaque; + + /* Sanity-check input state */ + if (s->read_pos >= ARRAY_SIZE(s->read_fifo) || + s->read_count > ARRAY_SIZE(s->read_fifo)) { + return -1; + } + + if (!pl011_is_fifo_enabled(s) && s->read_count > 0 && s->read_pos > 0) { + /* + * Older versions of PL011 didn't ensure that the single + * character in the FIFO in FIFO-disabled mode is in + * element 0 of the array; convert to follow the current + * code's assumptions. + */ + s->read_fifo[0] = s->read_fifo[s->read_pos]; + s->read_pos = 0; + } + + return 0; +} + static const VMStateDescription vmstate_pl011 = { .name = "pl011", .version_id = 2, .minimum_version_id = 2, + .post_load = pl011_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32(readbuff, PL011State), VMSTATE_UINT32(flags, PL011State), -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> PL011 currently lacks a reset method. Implement it. Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230123162304.26254-4-eiakovlev@linux.microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/pl011.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/hw/char/pl011.c b/hw/char/pl011.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/pl011.c +++ b/hw/char/pl011.c @@ -XXX,XX +XXX,XX @@ static void pl011_init(Object *obj) s->clk = qdev_init_clock_in(DEVICE(obj), "clk", pl011_clock_update, s, ClockUpdate); - s->read_trigger = 1; - s->ifl = 0x12; - s->cr = 0x300; - s->flags = 0x90; - s->id = pl011_id_arm; } @@ -XXX,XX +XXX,XX @@ static void pl011_realize(DeviceState *dev, Error **errp) pl011_event, NULL, s, NULL, true); } +static void pl011_reset(DeviceState *dev) +{ + PL011State *s = PL011(dev); + + s->lcr = 0; + s->rsr = 0; + s->dmacr = 0; + s->int_enabled = 0; + s->int_level = 0; + s->ilpr = 0; + s->ibrd = 0; + s->fbrd = 0; + s->read_pos = 0; + s->read_count = 0; + s->read_trigger = 1; + s->ifl = 0x12; + s->cr = 0x300; + s->flags = 0x90; +} + static void pl011_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); dc->realize = pl011_realize; + dc->reset = pl011_reset; dc->vmsd = &vmstate_pl011; device_class_set_props(dc, pl011_properties); } -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Current FIFO handling code does not reset RXFE/RXFF flags when guest resets FIFO by writing to UARTLCR register, although internal FIFO state is reset to 0 read count. Actual guest-visible flag update will happen only on next data read or write attempt. As a result of that any guest that expects RXFE flag to be set (and RXFF to be cleared) after resetting FIFO will never see that happen. Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230123162304.26254-5-eiakovlev@linux.microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/pl011.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/hw/char/pl011.c b/hw/char/pl011.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/pl011.c +++ b/hw/char/pl011.c @@ -XXX,XX +XXX,XX @@ static inline unsigned pl011_get_fifo_depth(PL011State *s) return pl011_is_fifo_enabled(s) ? PL011_FIFO_DEPTH : 1; } +static inline void pl011_reset_fifo(PL011State *s) +{ + s->read_count = 0; + s->read_pos = 0; + + /* Reset FIFO flags */ + s->flags &= ~(PL011_FLAG_RXFF | PL011_FLAG_TXFF); + s->flags |= PL011_FLAG_RXFE | PL011_FLAG_TXFE; +} + static uint64_t pl011_read(void *opaque, hwaddr offset, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void pl011_write(void *opaque, hwaddr offset, case 11: /* UARTLCR_H */ /* Reset the FIFO state on FIFO enable or disable */ if ((s->lcr ^ value) & 0x10) { - s->read_count = 0; - s->read_pos = 0; + pl011_reset_fifo(s); } if ((s->lcr ^ value) & 0x1) { int break_enable = value & 0x1; @@ -XXX,XX +XXX,XX @@ static void pl011_reset(DeviceState *dev) s->ilpr = 0; s->ibrd = 0; s->fbrd = 0; - s->read_pos = 0; - s->read_count = 0; s->read_trigger = 1; s->ifl = 0x12; s->cr = 0x300; - s->flags = 0x90; + s->flags = 0; + pl011_reset_fifo(s); } static void pl011_class_init(ObjectClass *oc, void *data) -- 2.34.1 From: Alexander Graf <agraf@csgraf.de> We currently only support GICv2 emulation. To also support GICv3, we will need to pass a few system registers into their respective handler functions. This patch adds support for HVF to call into the TCG callbacks for GICv3 system register handlers. This is safe because the GICv3 TCG code is generic as long as we limit ourselves to EL0 and EL1 - which are the only modes supported by HVF. To make sure nobody trips over that, we also annotate callbacks that don't work in HVF mode, such as EL state change hooks. With GICv3 support in place, we can run with more than 8 vCPUs. Signed-off-by: Alexander Graf <agraf@csgraf.de> Message-id: 20230128224459.70676-1-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 16 +++- target/arm/hvf/hvf.c | 151 ++++++++++++++++++++++++++++++++++++ target/arm/hvf/trace-events | 2 + 3 files changed, 168 insertions(+), 1 deletion(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" #include "target/arm/cpregs.h" +#include "sysemu/tcg.h" +#include "sysemu/qtest.h" /* * Special case return value from hppvi_index(); must be larger than @@ -XXX,XX +XXX,XX @@ void gicv3_init_cpuif(GICv3State *s) * which case we'd get the wrong value. * So instead we define the regs with no ri->opaque info, and * get back to the GICv3CPUState from the CPUARMState. + * + * These CP regs callbacks can be called from either TCG or HVF code. */ define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); @@ -XXX,XX +XXX,XX @@ void gicv3_init_cpuif(GICv3State *s) define_arm_cp_regs(cpu, gicv3_cpuif_ich_apxr23_reginfo); } } - arm_register_el_change_hook(cpu, gicv3_cpuif_el_change_hook, cs); + if (tcg_enabled() || qtest_enabled()) { + /* + * We can only trap EL changes with TCG. However the GIC interrupt + * state only changes on EL changes involving EL2 or EL3, so for + * the non-TCG case this is OK, as EL2 and EL3 can't exist. + */ + arm_register_el_change_hook(cpu, gicv3_cpuif_el_change_hook, cs); + } else { + assert(!arm_feature(&cpu->env, ARM_FEATURE_EL2)); + assert(!arm_feature(&cpu->env, ARM_FEATURE_EL3)); + } } } diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ #define SYSREG_PMCCNTR_EL0 SYSREG(3, 3, 9, 13, 0) #define SYSREG_PMCCFILTR_EL0 SYSREG(3, 3, 14, 15, 7) +#define SYSREG_ICC_AP0R0_EL1 SYSREG(3, 0, 12, 8, 4) +#define SYSREG_ICC_AP0R1_EL1 SYSREG(3, 0, 12, 8, 5) +#define SYSREG_ICC_AP0R2_EL1 SYSREG(3, 0, 12, 8, 6) +#define SYSREG_ICC_AP0R3_EL1 SYSREG(3, 0, 12, 8, 7) +#define SYSREG_ICC_AP1R0_EL1 SYSREG(3, 0, 12, 9, 0) +#define SYSREG_ICC_AP1R1_EL1 SYSREG(3, 0, 12, 9, 1) +#define SYSREG_ICC_AP1R2_EL1 SYSREG(3, 0, 12, 9, 2) +#define SYSREG_ICC_AP1R3_EL1 SYSREG(3, 0, 12, 9, 3) +#define SYSREG_ICC_ASGI1R_EL1 SYSREG(3, 0, 12, 11, 6) +#define SYSREG_ICC_BPR0_EL1 SYSREG(3, 0, 12, 8, 3) +#define SYSREG_ICC_BPR1_EL1 SYSREG(3, 0, 12, 12, 3) +#define SYSREG_ICC_CTLR_EL1 SYSREG(3, 0, 12, 12, 4) +#define SYSREG_ICC_DIR_EL1 SYSREG(3, 0, 12, 11, 1) +#define SYSREG_ICC_EOIR0_EL1 SYSREG(3, 0, 12, 8, 1) +#define SYSREG_ICC_EOIR1_EL1 SYSREG(3, 0, 12, 12, 1) +#define SYSREG_ICC_HPPIR0_EL1 SYSREG(3, 0, 12, 8, 2) +#define SYSREG_ICC_HPPIR1_EL1 SYSREG(3, 0, 12, 12, 2) +#define SYSREG_ICC_IAR0_EL1 SYSREG(3, 0, 12, 8, 0) +#define SYSREG_ICC_IAR1_EL1 SYSREG(3, 0, 12, 12, 0) +#define SYSREG_ICC_IGRPEN0_EL1 SYSREG(3, 0, 12, 12, 6) +#define SYSREG_ICC_IGRPEN1_EL1 SYSREG(3, 0, 12, 12, 7) +#define SYSREG_ICC_PMR_EL1 SYSREG(3, 0, 4, 6, 0) +#define SYSREG_ICC_RPR_EL1 SYSREG(3, 0, 12, 11, 3) +#define SYSREG_ICC_SGI0R_EL1 SYSREG(3, 0, 12, 11, 7) +#define SYSREG_ICC_SGI1R_EL1 SYSREG(3, 0, 12, 11, 5) +#define SYSREG_ICC_SRE_EL1 SYSREG(3, 0, 12, 12, 5) + #define WFX_IS_WFE (1 << 0) #define TMR_CTL_ENABLE (1 << 0) @@ -XXX,XX +XXX,XX @@ static bool is_id_sysreg(uint32_t reg) SYSREG_CRM(reg) < 8; } +static uint32_t hvf_reg2cp_reg(uint32_t reg) +{ + return ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, + (reg >> SYSREG_CRN_SHIFT) & SYSREG_CRN_MASK, + (reg >> SYSREG_CRM_SHIFT) & SYSREG_CRM_MASK, + (reg >> SYSREG_OP0_SHIFT) & SYSREG_OP0_MASK, + (reg >> SYSREG_OP1_SHIFT) & SYSREG_OP1_MASK, + (reg >> SYSREG_OP2_SHIFT) & SYSREG_OP2_MASK); +} + +static bool hvf_sysreg_read_cp(CPUState *cpu, uint32_t reg, uint64_t *val) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + const ARMCPRegInfo *ri; + + ri = get_arm_cp_reginfo(arm_cpu->cp_regs, hvf_reg2cp_reg(reg)); + if (ri) { + if (ri->accessfn) { + if (ri->accessfn(env, ri, true) != CP_ACCESS_OK) { + return false; + } + } + if (ri->type & ARM_CP_CONST) { + *val = ri->resetvalue; + } else if (ri->readfn) { + *val = ri->readfn(env, ri); + } else { + *val = CPREG_FIELD64(env, ri); + } + trace_hvf_vgic_read(ri->name, *val); + return true; + } + + return false; +} + static int hvf_sysreg_read(CPUState *cpu, uint32_t reg, uint32_t rt) { ARMCPU *arm_cpu = ARM_CPU(cpu); @@ -XXX,XX +XXX,XX @@ static int hvf_sysreg_read(CPUState *cpu, uint32_t reg, uint32_t rt) case SYSREG_OSDLR_EL1: /* Dummy register */ break; + case SYSREG_ICC_AP0R0_EL1: + case SYSREG_ICC_AP0R1_EL1: + case SYSREG_ICC_AP0R2_EL1: + case SYSREG_ICC_AP0R3_EL1: + case SYSREG_ICC_AP1R0_EL1: + case SYSREG_ICC_AP1R1_EL1: + case SYSREG_ICC_AP1R2_EL1: + case SYSREG_ICC_AP1R3_EL1: + case SYSREG_ICC_ASGI1R_EL1: + case SYSREG_ICC_BPR0_EL1: + case SYSREG_ICC_BPR1_EL1: + case SYSREG_ICC_DIR_EL1: + case SYSREG_ICC_EOIR0_EL1: + case SYSREG_ICC_EOIR1_EL1: + case SYSREG_ICC_HPPIR0_EL1: + case SYSREG_ICC_HPPIR1_EL1: + case SYSREG_ICC_IAR0_EL1: + case SYSREG_ICC_IAR1_EL1: + case SYSREG_ICC_IGRPEN0_EL1: + case SYSREG_ICC_IGRPEN1_EL1: + case SYSREG_ICC_PMR_EL1: + case SYSREG_ICC_SGI0R_EL1: + case SYSREG_ICC_SGI1R_EL1: + case SYSREG_ICC_SRE_EL1: + case SYSREG_ICC_CTLR_EL1: + /* Call the TCG sysreg handler. This is only safe for GICv3 regs. */ + if (!hvf_sysreg_read_cp(cpu, reg, &val)) { + hvf_raise_exception(cpu, EXCP_UDEF, syn_uncategorized()); + } + break; default: if (is_id_sysreg(reg)) { /* ID system registers read as RES0 */ @@ -XXX,XX +XXX,XX @@ static void pmswinc_write(CPUARMState *env, uint64_t value) } } +static bool hvf_sysreg_write_cp(CPUState *cpu, uint32_t reg, uint64_t val) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + const ARMCPRegInfo *ri; + + ri = get_arm_cp_reginfo(arm_cpu->cp_regs, hvf_reg2cp_reg(reg)); + + if (ri) { + if (ri->accessfn) { + if (ri->accessfn(env, ri, false) != CP_ACCESS_OK) { + return false; + } + } + if (ri->writefn) { + ri->writefn(env, ri, val); + } else { + CPREG_FIELD64(env, ri) = val; + } + + trace_hvf_vgic_write(ri->name, val); + return true; + } + + return false; +} + static int hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val) { ARMCPU *arm_cpu = ARM_CPU(cpu); @@ -XXX,XX +XXX,XX @@ static int hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val) case SYSREG_OSDLR_EL1: /* Dummy register */ break; + case SYSREG_ICC_AP0R0_EL1: + case SYSREG_ICC_AP0R1_EL1: + case SYSREG_ICC_AP0R2_EL1: + case SYSREG_ICC_AP0R3_EL1: + case SYSREG_ICC_AP1R0_EL1: + case SYSREG_ICC_AP1R1_EL1: + case SYSREG_ICC_AP1R2_EL1: + case SYSREG_ICC_AP1R3_EL1: + case SYSREG_ICC_ASGI1R_EL1: + case SYSREG_ICC_BPR0_EL1: + case SYSREG_ICC_BPR1_EL1: + case SYSREG_ICC_CTLR_EL1: + case SYSREG_ICC_DIR_EL1: + case SYSREG_ICC_EOIR0_EL1: + case SYSREG_ICC_EOIR1_EL1: + case SYSREG_ICC_HPPIR0_EL1: + case SYSREG_ICC_HPPIR1_EL1: + case SYSREG_ICC_IAR0_EL1: + case SYSREG_ICC_IAR1_EL1: + case SYSREG_ICC_IGRPEN0_EL1: + case SYSREG_ICC_IGRPEN1_EL1: + case SYSREG_ICC_PMR_EL1: + case SYSREG_ICC_SGI0R_EL1: + case SYSREG_ICC_SGI1R_EL1: + case SYSREG_ICC_SRE_EL1: + /* Call the TCG sysreg handler. This is only safe for GICv3 regs. */ + if (!hvf_sysreg_write_cp(cpu, reg, val)) { + hvf_raise_exception(cpu, EXCP_UDEF, syn_uncategorized()); + } + break; default: cpu_synchronize_state(cpu); trace_hvf_unhandled_sysreg_write(env->pc, reg, diff --git a/target/arm/hvf/trace-events b/target/arm/hvf/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/trace-events +++ b/target/arm/hvf/trace-events @@ -XXX,XX +XXX,XX @@ hvf_unknown_hvc(uint64_t x0) "unknown HVC! 0x%016"PRIx64 hvf_unknown_smc(uint64_t x0) "unknown SMC! 0x%016"PRIx64 hvf_exit(uint64_t syndrome, uint32_t ec, uint64_t pc) "exit: 0x%"PRIx64" [ec=0x%x pc=0x%"PRIx64"]" hvf_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid) "PSCI Call x0=0x%016"PRIx64" x1=0x%016"PRIx64" x2=0x%016"PRIx64" x3=0x%016"PRIx64" cpu=0x%x" +hvf_vgic_write(const char *name, uint64_t val) "vgic write to %s [val=0x%016"PRIx64"]" +hvf_vgic_read(const char *name, uint64_t val) "vgic read from %s [val=0x%016"PRIx64"]" -- 2.34.1 From: Alexander Graf <agraf@csgraf.de> Up to now, the finalize_gic_version() code open coded what is essentially a support bitmap match between host/emulation environment and desired target GIC type. This open coding leads to undesirable side effects. For example, a VM with KVM and -smp 10 will automatically choose GICv3 while the same command line with TCG will stay on GICv2 and fail the launch. This patch combines the TCG and KVM matching code paths by making everything a 2 pass process. First, we determine which GIC versions the current environment is able to support, then we go through a single state machine to determine which target GIC mode that means for us. After this patch, the only user noticable changes should be consolidated error messages as well as TCG -M virt supporting -smp > 8 automatically. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20221223090107.98888-2-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 15 ++-- hw/arm/virt.c | 198 ++++++++++++++++++++++-------------------- 2 files changed, 112 insertions(+), 101 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef enum VirtMSIControllerType { } VirtMSIControllerType; typedef enum VirtGICType { - VIRT_GIC_VERSION_MAX, - VIRT_GIC_VERSION_HOST, - VIRT_GIC_VERSION_2, - VIRT_GIC_VERSION_3, - VIRT_GIC_VERSION_4, + VIRT_GIC_VERSION_MAX = 0, + VIRT_GIC_VERSION_HOST = 1, + /* The concrete GIC values have to match the GIC version number */ + VIRT_GIC_VERSION_2 = 2, + VIRT_GIC_VERSION_3 = 3, + VIRT_GIC_VERSION_4 = 4, VIRT_GIC_VERSION_NOSEL, } VirtGICType; +#define VIRT_GIC_VERSION_2_MASK BIT(VIRT_GIC_VERSION_2) +#define VIRT_GIC_VERSION_3_MASK BIT(VIRT_GIC_VERSION_3) +#define VIRT_GIC_VERSION_4_MASK BIT(VIRT_GIC_VERSION_4) + struct VirtMachineClass { MachineClass parent; bool disallow_affinity_adjustment; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits) } } +static VirtGICType finalize_gic_version_do(const char *accel_name, + VirtGICType gic_version, + int gics_supported, + unsigned int max_cpus) +{ + /* Convert host/max/nosel to GIC version number */ + switch (gic_version) { + case VIRT_GIC_VERSION_HOST: + if (!kvm_enabled()) { + error_report("gic-version=host requires KVM"); + exit(1); + } + + /* For KVM, gic-version=host means gic-version=max */ + return finalize_gic_version_do(accel_name, VIRT_GIC_VERSION_MAX, + gics_supported, max_cpus); + case VIRT_GIC_VERSION_MAX: + if (gics_supported & VIRT_GIC_VERSION_4_MASK) { + gic_version = VIRT_GIC_VERSION_4; + } else if (gics_supported & VIRT_GIC_VERSION_3_MASK) { + gic_version = VIRT_GIC_VERSION_3; + } else { + gic_version = VIRT_GIC_VERSION_2; + } + break; + case VIRT_GIC_VERSION_NOSEL: + if ((gics_supported & VIRT_GIC_VERSION_2_MASK) && + max_cpus <= GIC_NCPU) { + gic_version = VIRT_GIC_VERSION_2; + } else if (gics_supported & VIRT_GIC_VERSION_3_MASK) { + /* + * in case the host does not support v2 emulation or + * the end-user requested more than 8 VCPUs we now default + * to v3. In any case defaulting to v2 would be broken. + */ + gic_version = VIRT_GIC_VERSION_3; + } else if (max_cpus > GIC_NCPU) { + error_report("%s only supports GICv2 emulation but more than 8 " + "vcpus are requested", accel_name); + exit(1); + } + break; + case VIRT_GIC_VERSION_2: + case VIRT_GIC_VERSION_3: + case VIRT_GIC_VERSION_4: + break; + } + + /* Check chosen version is effectively supported */ + switch (gic_version) { + case VIRT_GIC_VERSION_2: + if (!(gics_supported & VIRT_GIC_VERSION_2_MASK)) { + error_report("%s does not support GICv2 emulation", accel_name); + exit(1); + } + break; + case VIRT_GIC_VERSION_3: + if (!(gics_supported & VIRT_GIC_VERSION_3_MASK)) { + error_report("%s does not support GICv3 emulation", accel_name); + exit(1); + } + break; + case VIRT_GIC_VERSION_4: + if (!(gics_supported & VIRT_GIC_VERSION_4_MASK)) { + error_report("%s does not support GICv4 emulation, is virtualization=on?", + accel_name); + exit(1); + } + break; + default: + error_report("logic error in finalize_gic_version"); + exit(1); + break; + } + + return gic_version; +} + /* * finalize_gic_version - Determines the final gic_version * according to the gic-version property @@ -XXX,XX +XXX,XX @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits) */ static void finalize_gic_version(VirtMachineState *vms) { + const char *accel_name = current_accel_name(); unsigned int max_cpus = MACHINE(vms)->smp.max_cpus; + int gics_supported = 0; - if (kvm_enabled()) { - int probe_bitmap; + /* Determine which GIC versions the current environment supports */ + if (kvm_enabled() && kvm_irqchip_in_kernel()) { + int probe_bitmap = kvm_arm_vgic_probe(); - if (!kvm_irqchip_in_kernel()) { - switch (vms->gic_version) { - case VIRT_GIC_VERSION_HOST: - warn_report( - "gic-version=host not relevant with kernel-irqchip=off " - "as only userspace GICv2 is supported. Using v2 ..."); - return; - case VIRT_GIC_VERSION_MAX: - case VIRT_GIC_VERSION_NOSEL: - vms->gic_version = VIRT_GIC_VERSION_2; - return; - case VIRT_GIC_VERSION_2: - return; - case VIRT_GIC_VERSION_3: - error_report( - "gic-version=3 is not supported with kernel-irqchip=off"); - exit(1); - case VIRT_GIC_VERSION_4: - error_report( - "gic-version=4 is not supported with kernel-irqchip=off"); - exit(1); - } - } - - probe_bitmap = kvm_arm_vgic_probe(); if (!probe_bitmap) { error_report("Unable to determine GIC version supported by host"); exit(1); } - switch (vms->gic_version) { - case VIRT_GIC_VERSION_HOST: - case VIRT_GIC_VERSION_MAX: - if (probe_bitmap & KVM_ARM_VGIC_V3) { - vms->gic_version = VIRT_GIC_VERSION_3; - } else { - vms->gic_version = VIRT_GIC_VERSION_2; - } - return; - case VIRT_GIC_VERSION_NOSEL: - if ((probe_bitmap & KVM_ARM_VGIC_V2) && max_cpus <= GIC_NCPU) { - vms->gic_version = VIRT_GIC_VERSION_2; - } else if (probe_bitmap & KVM_ARM_VGIC_V3) { - /* - * in case the host does not support v2 in-kernel emulation or - * the end-user requested more than 8 VCPUs we now default - * to v3. In any case defaulting to v2 would be broken. - */ - vms->gic_version = VIRT_GIC_VERSION_3; - } else if (max_cpus > GIC_NCPU) { - error_report("host only supports in-kernel GICv2 emulation " - "but more than 8 vcpus are requested"); - exit(1); - } - break; - case VIRT_GIC_VERSION_2: - case VIRT_GIC_VERSION_3: - break; - case VIRT_GIC_VERSION_4: - error_report("gic-version=4 is not supported with KVM"); - exit(1); + if (probe_bitmap & KVM_ARM_VGIC_V2) { + gics_supported |= VIRT_GIC_VERSION_2_MASK; } - - /* Check chosen version is effectively supported by the host */ - if (vms->gic_version == VIRT_GIC_VERSION_2 && - !(probe_bitmap & KVM_ARM_VGIC_V2)) { - error_report("host does not support in-kernel GICv2 emulation"); - exit(1); - } else if (vms->gic_version == VIRT_GIC_VERSION_3 && - !(probe_bitmap & KVM_ARM_VGIC_V3)) { - error_report("host does not support in-kernel GICv3 emulation"); - exit(1); + if (probe_bitmap & KVM_ARM_VGIC_V3) { + gics_supported |= VIRT_GIC_VERSION_3_MASK; } - return; - } - - /* TCG mode */ - switch (vms->gic_version) { - case VIRT_GIC_VERSION_NOSEL: - vms->gic_version = VIRT_GIC_VERSION_2; - break; - case VIRT_GIC_VERSION_MAX: + } else if (kvm_enabled() && !kvm_irqchip_in_kernel()) { + /* KVM w/o kernel irqchip can only deal with GICv2 */ + gics_supported |= VIRT_GIC_VERSION_2_MASK; + accel_name = "KVM with kernel-irqchip=off"; + } else { + gics_supported |= VIRT_GIC_VERSION_2_MASK; if (module_object_class_by_name("arm-gicv3")) { - /* CONFIG_ARM_GICV3_TCG was set */ + gics_supported |= VIRT_GIC_VERSION_3_MASK; if (vms->virt) { /* GICv4 only makes sense if CPU has EL2 */ - vms->gic_version = VIRT_GIC_VERSION_4; - } else { - vms->gic_version = VIRT_GIC_VERSION_3; + gics_supported |= VIRT_GIC_VERSION_4_MASK; } - } else { - vms->gic_version = VIRT_GIC_VERSION_2; } - break; - case VIRT_GIC_VERSION_HOST: - error_report("gic-version=host requires KVM"); - exit(1); - case VIRT_GIC_VERSION_4: - if (!vms->virt) { - error_report("gic-version=4 requires virtualization enabled"); - exit(1); - } - break; - case VIRT_GIC_VERSION_2: - case VIRT_GIC_VERSION_3: - break; } + + /* + * Then convert helpers like host/max to concrete GIC versions and ensure + * the desired version is supported + */ + vms->gic_version = finalize_gic_version_do(accel_name, vms->gic_version, + gics_supported, max_cpus); } /* -- 2.34.1 From: Alexander Graf <agraf@csgraf.de> Let's explicitly list out all accelerators that we support when trying to determine the supported set of GIC versions. KVM was already separate, so the only missing one is HVF which simply reuses all of TCG's emulation code and thus has the same compatibility matrix. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221223090107.98888-3-agraf@csgraf.de [PMM: Added qtest to the list of accelerators] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/numa.h" #include "sysemu/runstate.h" #include "sysemu/tpm.h" +#include "sysemu/tcg.h" #include "sysemu/kvm.h" #include "sysemu/hvf.h" +#include "sysemu/qtest.h" #include "hw/loader.h" #include "qapi/error.h" #include "qemu/bitops.h" @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) /* KVM w/o kernel irqchip can only deal with GICv2 */ gics_supported |= VIRT_GIC_VERSION_2_MASK; accel_name = "KVM with kernel-irqchip=off"; - } else { + } else if (tcg_enabled() || hvf_enabled() || qtest_enabled()) { gics_supported |= VIRT_GIC_VERSION_2_MASK; if (module_object_class_by_name("arm-gicv3")) { gics_supported |= VIRT_GIC_VERSION_3_MASK; @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) gics_supported |= VIRT_GIC_VERSION_4_MASK; } } + } else { + error_report("Unsupported accelerator, can not determine GIC support"); + exit(1); } /* -- 2.34.1 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Cortex-A76 supports 40bits of address space. sbsa-ref's memory starts above this limit. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230126114416.2447685-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 1 - 1 file changed, 1 deletion(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), - ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("max"), }; -- 2.34.1 The encodings 0,0,C7,C9,0 and 0,0,C7,C9,1 are AT SP1E1RP and AT S1E1WP, but our ARMCPRegInfo definitions for them incorrectly name them AT S1E1R and AT S1E1W (which are entirely different instructions). Fix the names. (This has no guest-visible effect as the names are for debug purposes only.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-2-peter.maydell@linaro.org Message-id: 20230127175507.2895013-2-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vhe_reginfo[] = { #ifndef CONFIG_USER_ONLY static const ARMCPRegInfo ats1e1_reginfo[] = { - { .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64, + { .name = "AT_S1E1RP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, - { .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64, + { .name = "AT_S1E1WP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, -- 2.34.1 The AArch32 ATS12NSO* address translation operations are supposed to trap to either EL2 or EL3 if they're executed at Secure EL1 (which can only happen if EL3 is AArch64). We implement this, but we got the syndrome value wrong: like other traps to EL2 or EL3 on an AArch32 cpreg access, they should report the 0x3 syndrome, not the 0x0 'uncategorized' syndrome. This is clear in the access pseudocode for these instructions. Fix the syndrome value for these operations by correcting the returned value from the ats_access() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-3-peter.maydell@linaro.org Message-id: 20230127175507.2895013-3-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_current_el(env) == 1) { if (arm_is_secure_below_el3(env)) { if (env->cp15.scr_el3 & SCR_EEL2) { - return CP_ACCESS_TRAP_UNCATEGORIZED_EL2; + return CP_ACCESS_TRAP_EL2; } - return CP_ACCESS_TRAP_UNCATEGORIZED_EL3; + return CP_ACCESS_TRAP_EL3; } return CP_ACCESS_TRAP_UNCATEGORIZED; } -- 2.34.1 We added the CPAccessResult values CP_ACCESS_TRAP_UNCATEGORIZED_EL2 and CP_ACCESS_TRAP_UNCATEGORIZED_EL3 purely in order to use them in the ats_access() function, but doing so was incorrect (a bug fixed in a previous commit). There aren't any cases where we want an access function to be able to request a trap to EL2 or EL3 with a zero syndrome value, so remove these enum values. As well as cleaning up dead code, the motivation here is that we'd like to implement fine-grained-trap handling in helper_access_check_cp_reg(). Although the fine-grained traps to EL2 are always lower priority than trap-to-same-EL and higher priority than trap-to-EL3, they are in the middle of various other kinds of trap-to-EL2. Knowing that a trap-to-EL2 must always for us have the same syndrome (ie that an access function will return CP_ACCESS_TRAP_EL2 and there is no other kind of trap-to-EL2 enum value) means we don't have to try to choose which of the two syndrome values to report if the access would trap to EL2 both for the fine-grained-trap and because the access function requires it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-4-peter.maydell@linaro.org Message-id: 20230127175507.2895013-4-peter.maydell@linaro.org --- target/arm/cpregs.h | 4 ++-- target/arm/op_helper.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum CPAccessResult { * Access fails and results in an exception syndrome 0x0 ("uncategorized"). * Note that this is not a catch-all case -- the set of cases which may * result in this failure is specifically defined by the architecture. + * This trap is always to the usual target EL, never directly to a + * specified target EL. */ CP_ACCESS_TRAP_UNCATEGORIZED = (2 << 2), - CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = CP_ACCESS_TRAP_UNCATEGORIZED | 2, - CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = CP_ACCESS_TRAP_UNCATEGORIZED | 3, } CPAccessResult; typedef struct ARMCPRegInfo ARMCPRegInfo; diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, case CP_ACCESS_TRAP: break; case CP_ACCESS_TRAP_UNCATEGORIZED: + /* Only CP_ACCESS_TRAP traps are direct to a specified EL */ + assert((res & CP_ACCESS_EL_MASK) == 0); if (cpu_isar_feature(aa64_ids, cpu) && isread && arm_cpreg_in_idspace(ri)) { /* -- 2.34.1 Rearrange the code in do_coproc_insn() so that we calculate the syndrome value for a potential trap early; we're about to add a second check that wants this value earlier than where it is currently determined. (Specifically, a trap to EL2 because of HSTR_EL2 should take priority over an UNDEF to EL1, even when the UNDEF is because the register does not exist at all or because its ri->access bits non-configurably fail the access. So the check we put in for HSTR_EL2 trapping at EL1 (which needs the syndrome) is going to have to be done before the check "is the ARMCPRegInfo pointer NULL".) This commit is just code motion; the change to HSTR_EL2 handling that will use the 'syndrome' variable is in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-5-peter.maydell@linaro.org Message-id: 20230127175507.2895013-5-peter.maydell@linaro.org --- target/arm/translate.c | 83 +++++++++++++++++++++--------------------- 1 file changed, 41 insertions(+), 42 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void do_coproc_insn(DisasContext *s, int cpnum, int is64, const ARMCPRegInfo *ri = get_arm_cp_reginfo(s->cp_regs, key); TCGv_ptr tcg_ri = NULL; bool need_exit_tb; + uint32_t syndrome; + + /* + * Note that since we are an implementation which takes an + * exception on a trapped conditional instruction only if the + * instruction passes its condition code check, we can take + * advantage of the clause in the ARM ARM that allows us to set + * the COND field in the instruction to 0xE in all cases. + * We could fish the actual condition out of the insn (ARM) + * or the condexec bits (Thumb) but it isn't necessary. + */ + switch (cpnum) { + case 14: + if (is64) { + syndrome = syn_cp14_rrt_trap(1, 0xe, opc1, crm, rt, rt2, + isread, false); + } else { + syndrome = syn_cp14_rt_trap(1, 0xe, opc1, opc2, crn, crm, + rt, isread, false); + } + break; + case 15: + if (is64) { + syndrome = syn_cp15_rrt_trap(1, 0xe, opc1, crm, rt, rt2, + isread, false); + } else { + syndrome = syn_cp15_rt_trap(1, 0xe, opc1, opc2, crn, crm, + rt, isread, false); + } + break; + default: + /* + * ARMv8 defines that only coprocessors 14 and 15 exist, + * so this can only happen if this is an ARMv7 or earlier CPU, + * in which case the syndrome information won't actually be + * guest visible. + */ + assert(!arm_dc_feature(s, ARM_FEATURE_V8)); + syndrome = syn_uncategorized(); + break; + } if (!ri) { /* @@ -XXX,XX +XXX,XX @@ static void do_coproc_insn(DisasContext *s, int cpnum, int is64, * Note that on XScale all cp0..c13 registers do an access check * call in order to handle c15_cpar. */ - uint32_t syndrome; - - /* - * Note that since we are an implementation which takes an - * exception on a trapped conditional instruction only if the - * instruction passes its condition code check, we can take - * advantage of the clause in the ARM ARM that allows us to set - * the COND field in the instruction to 0xE in all cases. - * We could fish the actual condition out of the insn (ARM) - * or the condexec bits (Thumb) but it isn't necessary. - */ - switch (cpnum) { - case 14: - if (is64) { - syndrome = syn_cp14_rrt_trap(1, 0xe, opc1, crm, rt, rt2, - isread, false); - } else { - syndrome = syn_cp14_rt_trap(1, 0xe, opc1, opc2, crn, crm, - rt, isread, false); - } - break; - case 15: - if (is64) { - syndrome = syn_cp15_rrt_trap(1, 0xe, opc1, crm, rt, rt2, - isread, false); - } else { - syndrome = syn_cp15_rt_trap(1, 0xe, opc1, opc2, crn, crm, - rt, isread, false); - } - break; - default: - /* - * ARMv8 defines that only coprocessors 14 and 15 exist, - * so this can only happen if this is an ARMv7 or earlier CPU, - * in which case the syndrome information won't actually be - * guest visible. - */ - assert(!arm_dc_feature(s, ARM_FEATURE_V8)); - syndrome = syn_uncategorized(); - break; - } - gen_set_condexec(s); gen_update_pc(s, 0); tcg_ri = tcg_temp_new_ptr(); -- 2.34.1 The HSTR_EL2 register has a collection of trap bits which allow trapping to EL2 for AArch32 EL0 or EL1 accesses to coprocessor registers. The specification of these bits is that when the bit is set we should trap * EL1 accesses * EL0 accesses, if the access is not UNDEFINED when the trap bit is 0 In other words, all UNDEF traps from EL0 to EL1 take precedence over the HSTR_EL2 trap to EL2. (Since this is all AArch32, the only kind of trap-to-EL1 is the UNDEF.) Our implementation doesn't quite get this right -- we check for traps in the order: * no such register * ARMCPRegInfo::access bits * HSTR_EL2 trap bits * ARMCPRegInfo::accessfn So UNDEFs that happen because of the access bits or because the register doesn't exist at all correctly take priority over the HSTR_EL2 trap, but where a register can UNDEF at EL0 because of the accessfn we are incorrectly always taking the HSTR_EL2 trap. There aren't many of these, but one example is the PMCR; if you look at the access pseudocode for this register you can see that UNDEFs taken because of the value of PMUSERENR.EN are checked before the HSTR_EL2 bit. Rearrange helper_access_check_cp_reg() so that we always call the accessfn, and use its return value if it indicates that the access traps to EL0 rather than continuing to do the HSTR_EL2 check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-6-peter.maydell@linaro.org Message-id: 20230127175507.2895013-6-peter.maydell@linaro.org --- target/arm/op_helper.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, goto fail; } + if (ri->accessfn) { + res = ri->accessfn(env, ri, isread); + } + /* - * Check for an EL2 trap due to HSTR_EL2. We expect EL0 accesses - * to sysregs non accessible at EL0 to have UNDEF-ed already. + * If the access function indicates a trap from EL0 to EL1 then + * that always takes priority over the HSTR_EL2 trap. (If it indicates + * a trap to EL3, then the HSTR_EL2 trap takes priority; if it indicates + * a trap to EL2, then the syndrome is the same either way so we don't + * care whether technically the architecture says that HSTR_EL2 trap or + * the other trap takes priority. So we take the "check HSTR_EL2" path + * for all of those cases.) */ + if (res != CP_ACCESS_OK && ((res & CP_ACCESS_EL_MASK) == 0) && + arm_current_el(env) == 0) { + goto fail; + } + if (!is_a64(env) && arm_current_el(env) < 2 && ri->cp == 15 && (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { uint32_t mask = 1 << ri->crn; @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, } } - if (ri->accessfn) { - res = ri->accessfn(env, ri, isread); - } if (likely(res == CP_ACCESS_OK)) { return ri; } -- 2.34.1 The semantics of HSTR_EL2 require that it traps cpreg accesses to EL2 for: * EL1 accesses * EL0 accesses, if the access is not UNDEFINED when the trap bit is 0 (You can see this in the I_ZFGJP priority ordering, where HSTR_EL2 traps from EL1 to EL2 are priority 12, UNDEFs are priority 13, and HSTR_EL2 traps from EL0 are priority 15.) However, we don't get this right for EL1 accesses which UNDEF because the register doesn't exist at all or because its ri->access bits non-configurably forbid the access. At EL1, check for the HSTR_EL2 trap early, before either of these UNDEF reasons. We have to retain the HSTR_EL2 check in access_check_cp_reg(), because at EL0 any kind of UNDEF-to-EL1 (including "no such register", "bad ri->access" and "ri->accessfn returns 'trap to EL1'") takes precedence over the trap to EL2. But we only need to do that check for EL0 now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230130182459.3309057-7-peter.maydell@linaro.org Message-id: 20230127175507.2895013-7-peter.maydell@linaro.org --- target/arm/op_helper.c | 6 +++++- target/arm/translate.c | 28 +++++++++++++++++++++++++++- 2 files changed, 32 insertions(+), 2 deletions(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, goto fail; } - if (!is_a64(env) && arm_current_el(env) < 2 && ri->cp == 15 && + /* + * HSTR_EL2 traps from EL1 are checked earlier, in generated code; + * we only need to check here for traps from EL0. + */ + if (!is_a64(env) && arm_current_el(env) == 0 && ri->cp == 15 && (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { uint32_t mask = 1 << ri->crn; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void do_coproc_insn(DisasContext *s, int cpnum, int is64, break; } + if (s->hstr_active && cpnum == 15 && s->current_el == 1) { + /* + * At EL1, check for a HSTR_EL2 trap, which must take precedence + * over the UNDEF for "no such register" or the UNDEF for "access + * permissions forbid this EL1 access". HSTR_EL2 traps from EL0 + * only happen if the cpreg doesn't UNDEF at EL0, so we do those in + * access_check_cp_reg(), after the checks for whether the access + * configurably trapped to EL1. + */ + uint32_t maskbit = is64 ? crm : crn; + + if (maskbit != 4 && maskbit != 14) { + /* T4 and T14 are RES0 so never cause traps */ + TCGv_i32 t; + DisasLabel over = gen_disas_label(s); + + t = load_cpu_offset(offsetoflow32(CPUARMState, cp15.hstr_el2)); + tcg_gen_andi_i32(t, t, 1u << maskbit); + tcg_gen_brcondi_i32(TCG_COND_EQ, t, 0, over.label); + tcg_temp_free_i32(t); + + gen_exception_insn(s, 0, EXCP_UDEF, syndrome); + set_disas_label(s, over); + } + } + if (!ri) { /* * Unknown register; this might be a guest error or a QEMU @@ -XXX,XX +XXX,XX @@ static void do_coproc_insn(DisasContext *s, int cpnum, int is64, return; } - if (s->hstr_active || ri->accessfn || + if ((s->hstr_active && s->current_el == 0) || ri->accessfn || (arm_dc_feature(s, ARM_FEATURE_XSCALE) && cpnum < 14)) { /* * Emit code to perform further access permissions checks at -- 2.34.1 The HSTR_EL2 register is not supposed to have an effect unless EL2 is enabled in the current security state. We weren't checking for this, which meant that if the guest set up the HSTR_EL2 register we would incorrectly trap even for accesses from Secure EL0 and EL1. Add the missing checks. (Other places where we look at HSTR_EL2 for the not-in-v8A bits TTEE and TJDBX are already checking that we are in NS EL0 or EL1, so there we alredy know EL2 is enabled.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-8-peter.maydell@linaro.org Message-id: 20230127175507.2895013-8-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- target/arm/op_helper.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, DP_TBFLAG_A32(flags, VFPEN, 1); } - if (el < 2 && env->cp15.hstr_el2 && + if (el < 2 && env->cp15.hstr_el2 && arm_is_el2_enabled(env) && (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { DP_TBFLAG_A32(flags, HSTR_ACTIVE, 1); } diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, * we only need to check here for traps from EL0. */ if (!is_a64(env) && arm_current_el(env) == 0 && ri->cp == 15 && + arm_is_el2_enabled(env) && (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { uint32_t mask = 1 << ri->crn; -- 2.34.1 Define the system registers which are provided by the FEAT_FGT fine-grained trap architectural feature: HFGRTR_EL2, HFGWTR_EL2, HDFGRTR_EL2, HDFGWTR_EL2, HFGITR_EL2 All these registers are a set of bit fields, where each bit is set for a trap and clear to not trap on a particular system register access. The R and W register pairs are for system registers, allowing trapping to be done separately for reads and writes; the I register is for system instructions where trapping is on instruction execution. The data storage in the CPU state struct is arranged as a set of arrays rather than separate fields so that when we're looking up the bits for a system register access we can just index into the array rather than having to use a switch to select a named struct member. The later FEAT_FGT2 will add extra elements to these arrays. The field definitions for the new registers are in cpregs.h because in practice the code that needs them is code that also needs the cpregs information; cpu.h is included in a lot more files. We're also going to add some FGT-specific definitions to cpregs.h in the next commit. We do not implement HAFGRTR_EL2, because we don't implement FEAT_AMUv1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-9-peter.maydell@linaro.org Message-id: 20230127175507.2895013-9-peter.maydell@linaro.org --- target/arm/cpregs.h | 285 ++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 15 +++ target/arm/helper.c | 40 +++++++ 3 files changed, 340 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum CPAccessResult { CP_ACCESS_TRAP_UNCATEGORIZED = (2 << 2), } CPAccessResult; +/* Indexes into fgt_read[] */ +#define FGTREG_HFGRTR 0 +#define FGTREG_HDFGRTR 1 +/* Indexes into fgt_write[] */ +#define FGTREG_HFGWTR 0 +#define FGTREG_HDFGWTR 1 +/* Indexes into fgt_exec[] */ +#define FGTREG_HFGITR 0 + +FIELD(HFGRTR_EL2, AFSR0_EL1, 0, 1) +FIELD(HFGRTR_EL2, AFSR1_EL1, 1, 1) +FIELD(HFGRTR_EL2, AIDR_EL1, 2, 1) +FIELD(HFGRTR_EL2, AMAIR_EL1, 3, 1) +FIELD(HFGRTR_EL2, APDAKEY, 4, 1) +FIELD(HFGRTR_EL2, APDBKEY, 5, 1) +FIELD(HFGRTR_EL2, APGAKEY, 6, 1) +FIELD(HFGRTR_EL2, APIAKEY, 7, 1) +FIELD(HFGRTR_EL2, APIBKEY, 8, 1) +FIELD(HFGRTR_EL2, CCSIDR_EL1, 9, 1) +FIELD(HFGRTR_EL2, CLIDR_EL1, 10, 1) +FIELD(HFGRTR_EL2, CONTEXTIDR_EL1, 11, 1) +FIELD(HFGRTR_EL2, CPACR_EL1, 12, 1) +FIELD(HFGRTR_EL2, CSSELR_EL1, 13, 1) +FIELD(HFGRTR_EL2, CTR_EL0, 14, 1) +FIELD(HFGRTR_EL2, DCZID_EL0, 15, 1) +FIELD(HFGRTR_EL2, ESR_EL1, 16, 1) +FIELD(HFGRTR_EL2, FAR_EL1, 17, 1) +FIELD(HFGRTR_EL2, ISR_EL1, 18, 1) +FIELD(HFGRTR_EL2, LORC_EL1, 19, 1) +FIELD(HFGRTR_EL2, LOREA_EL1, 20, 1) +FIELD(HFGRTR_EL2, LORID_EL1, 21, 1) +FIELD(HFGRTR_EL2, LORN_EL1, 22, 1) +FIELD(HFGRTR_EL2, LORSA_EL1, 23, 1) +FIELD(HFGRTR_EL2, MAIR_EL1, 24, 1) +FIELD(HFGRTR_EL2, MIDR_EL1, 25, 1) +FIELD(HFGRTR_EL2, MPIDR_EL1, 26, 1) +FIELD(HFGRTR_EL2, PAR_EL1, 27, 1) +FIELD(HFGRTR_EL2, REVIDR_EL1, 28, 1) +FIELD(HFGRTR_EL2, SCTLR_EL1, 29, 1) +FIELD(HFGRTR_EL2, SCXTNUM_EL1, 30, 1) +FIELD(HFGRTR_EL2, SCXTNUM_EL0, 31, 1) +FIELD(HFGRTR_EL2, TCR_EL1, 32, 1) +FIELD(HFGRTR_EL2, TPIDR_EL1, 33, 1) +FIELD(HFGRTR_EL2, TPIDRRO_EL0, 34, 1) +FIELD(HFGRTR_EL2, TPIDR_EL0, 35, 1) +FIELD(HFGRTR_EL2, TTBR0_EL1, 36, 1) +FIELD(HFGRTR_EL2, TTBR1_EL1, 37, 1) +FIELD(HFGRTR_EL2, VBAR_EL1, 38, 1) +FIELD(HFGRTR_EL2, ICC_IGRPENN_EL1, 39, 1) +FIELD(HFGRTR_EL2, ERRIDR_EL1, 40, 1) +FIELD(HFGRTR_EL2, ERRSELR_EL1, 41, 1) +FIELD(HFGRTR_EL2, ERXFR_EL1, 42, 1) +FIELD(HFGRTR_EL2, ERXCTLR_EL1, 43, 1) +FIELD(HFGRTR_EL2, ERXSTATUS_EL1, 44, 1) +FIELD(HFGRTR_EL2, ERXMISCN_EL1, 45, 1) +FIELD(HFGRTR_EL2, ERXPFGF_EL1, 46, 1) +FIELD(HFGRTR_EL2, ERXPFGCTL_EL1, 47, 1) +FIELD(HFGRTR_EL2, ERXPFGCDN_EL1, 48, 1) +FIELD(HFGRTR_EL2, ERXADDR_EL1, 49, 1) +FIELD(HFGRTR_EL2, NACCDATA_EL1, 50, 1) +/* 51-53: RES0 */ +FIELD(HFGRTR_EL2, NSMPRI_EL1, 54, 1) +FIELD(HFGRTR_EL2, NTPIDR2_EL0, 55, 1) +/* 56-63: RES0 */ + +/* These match HFGRTR but bits for RO registers are RES0 */ +FIELD(HFGWTR_EL2, AFSR0_EL1, 0, 1) +FIELD(HFGWTR_EL2, AFSR1_EL1, 1, 1) +FIELD(HFGWTR_EL2, AMAIR_EL1, 3, 1) +FIELD(HFGWTR_EL2, APDAKEY, 4, 1) +FIELD(HFGWTR_EL2, APDBKEY, 5, 1) +FIELD(HFGWTR_EL2, APGAKEY, 6, 1) +FIELD(HFGWTR_EL2, APIAKEY, 7, 1) +FIELD(HFGWTR_EL2, APIBKEY, 8, 1) +FIELD(HFGWTR_EL2, CONTEXTIDR_EL1, 11, 1) +FIELD(HFGWTR_EL2, CPACR_EL1, 12, 1) +FIELD(HFGWTR_EL2, CSSELR_EL1, 13, 1) +FIELD(HFGWTR_EL2, ESR_EL1, 16, 1) +FIELD(HFGWTR_EL2, FAR_EL1, 17, 1) +FIELD(HFGWTR_EL2, LORC_EL1, 19, 1) +FIELD(HFGWTR_EL2, LOREA_EL1, 20, 1) +FIELD(HFGWTR_EL2, LORN_EL1, 22, 1) +FIELD(HFGWTR_EL2, LORSA_EL1, 23, 1) +FIELD(HFGWTR_EL2, MAIR_EL1, 24, 1) +FIELD(HFGWTR_EL2, PAR_EL1, 27, 1) +FIELD(HFGWTR_EL2, SCTLR_EL1, 29, 1) +FIELD(HFGWTR_EL2, SCXTNUM_EL1, 30, 1) +FIELD(HFGWTR_EL2, SCXTNUM_EL0, 31, 1) +FIELD(HFGWTR_EL2, TCR_EL1, 32, 1) +FIELD(HFGWTR_EL2, TPIDR_EL1, 33, 1) +FIELD(HFGWTR_EL2, TPIDRRO_EL0, 34, 1) +FIELD(HFGWTR_EL2, TPIDR_EL0, 35, 1) +FIELD(HFGWTR_EL2, TTBR0_EL1, 36, 1) +FIELD(HFGWTR_EL2, TTBR1_EL1, 37, 1) +FIELD(HFGWTR_EL2, VBAR_EL1, 38, 1) +FIELD(HFGWTR_EL2, ICC_IGRPENN_EL1, 39, 1) +FIELD(HFGWTR_EL2, ERRSELR_EL1, 41, 1) +FIELD(HFGWTR_EL2, ERXCTLR_EL1, 43, 1) +FIELD(HFGWTR_EL2, ERXSTATUS_EL1, 44, 1) +FIELD(HFGWTR_EL2, ERXMISCN_EL1, 45, 1) +FIELD(HFGWTR_EL2, ERXPFGCTL_EL1, 47, 1) +FIELD(HFGWTR_EL2, ERXPFGCDN_EL1, 48, 1) +FIELD(HFGWTR_EL2, ERXADDR_EL1, 49, 1) +FIELD(HFGWTR_EL2, NACCDATA_EL1, 50, 1) +FIELD(HFGWTR_EL2, NSMPRI_EL1, 54, 1) +FIELD(HFGWTR_EL2, NTPIDR2_EL0, 55, 1) + +FIELD(HFGITR_EL2, ICIALLUIS, 0, 1) +FIELD(HFGITR_EL2, ICIALLU, 1, 1) +FIELD(HFGITR_EL2, ICIVAU, 2, 1) +FIELD(HFGITR_EL2, DCIVAC, 3, 1) +FIELD(HFGITR_EL2, DCISW, 4, 1) +FIELD(HFGITR_EL2, DCCSW, 5, 1) +FIELD(HFGITR_EL2, DCCISW, 6, 1) +FIELD(HFGITR_EL2, DCCVAU, 7, 1) +FIELD(HFGITR_EL2, DCCVAP, 8, 1) +FIELD(HFGITR_EL2, DCCVADP, 9, 1) +FIELD(HFGITR_EL2, DCCIVAC, 10, 1) +FIELD(HFGITR_EL2, DCZVA, 11, 1) +FIELD(HFGITR_EL2, ATS1E1R, 12, 1) +FIELD(HFGITR_EL2, ATS1E1W, 13, 1) +FIELD(HFGITR_EL2, ATS1E0R, 14, 1) +FIELD(HFGITR_EL2, ATS1E0W, 15, 1) +FIELD(HFGITR_EL2, ATS1E1RP, 16, 1) +FIELD(HFGITR_EL2, ATS1E1WP, 17, 1) +FIELD(HFGITR_EL2, TLBIVMALLE1OS, 18, 1) +FIELD(HFGITR_EL2, TLBIVAE1OS, 19, 1) +FIELD(HFGITR_EL2, TLBIASIDE1OS, 20, 1) +FIELD(HFGITR_EL2, TLBIVAAE1OS, 21, 1) +FIELD(HFGITR_EL2, TLBIVALE1OS, 22, 1) +FIELD(HFGITR_EL2, TLBIVAALE1OS, 23, 1) +FIELD(HFGITR_EL2, TLBIRVAE1OS, 24, 1) +FIELD(HFGITR_EL2, TLBIRVAAE1OS, 25, 1) +FIELD(HFGITR_EL2, TLBIRVALE1OS, 26, 1) +FIELD(HFGITR_EL2, TLBIRVAALE1OS, 27, 1) +FIELD(HFGITR_EL2, TLBIVMALLE1IS, 28, 1) +FIELD(HFGITR_EL2, TLBIVAE1IS, 29, 1) +FIELD(HFGITR_EL2, TLBIASIDE1IS, 30, 1) +FIELD(HFGITR_EL2, TLBIVAAE1IS, 31, 1) +FIELD(HFGITR_EL2, TLBIVALE1IS, 32, 1) +FIELD(HFGITR_EL2, TLBIVAALE1IS, 33, 1) +FIELD(HFGITR_EL2, TLBIRVAE1IS, 34, 1) +FIELD(HFGITR_EL2, TLBIRVAAE1IS, 35, 1) +FIELD(HFGITR_EL2, TLBIRVALE1IS, 36, 1) +FIELD(HFGITR_EL2, TLBIRVAALE1IS, 37, 1) +FIELD(HFGITR_EL2, TLBIRVAE1, 38, 1) +FIELD(HFGITR_EL2, TLBIRVAAE1, 39, 1) +FIELD(HFGITR_EL2, TLBIRVALE1, 40, 1) +FIELD(HFGITR_EL2, TLBIRVAALE1, 41, 1) +FIELD(HFGITR_EL2, TLBIVMALLE1, 42, 1) +FIELD(HFGITR_EL2, TLBIVAE1, 43, 1) +FIELD(HFGITR_EL2, TLBIASIDE1, 44, 1) +FIELD(HFGITR_EL2, TLBIVAAE1, 45, 1) +FIELD(HFGITR_EL2, TLBIVALE1, 46, 1) +FIELD(HFGITR_EL2, TLBIVAALE1, 47, 1) +FIELD(HFGITR_EL2, CFPRCTX, 48, 1) +FIELD(HFGITR_EL2, DVPRCTX, 49, 1) +FIELD(HFGITR_EL2, CPPRCTX, 50, 1) +FIELD(HFGITR_EL2, ERET, 51, 1) +FIELD(HFGITR_EL2, SVC_EL0, 52, 1) +FIELD(HFGITR_EL2, SVC_EL1, 53, 1) +FIELD(HFGITR_EL2, DCCVAC, 54, 1) +FIELD(HFGITR_EL2, NBRBINJ, 55, 1) +FIELD(HFGITR_EL2, NBRBIALL, 56, 1) + +FIELD(HDFGRTR_EL2, DBGBCRN_EL1, 0, 1) +FIELD(HDFGRTR_EL2, DBGBVRN_EL1, 1, 1) +FIELD(HDFGRTR_EL2, DBGWCRN_EL1, 2, 1) +FIELD(HDFGRTR_EL2, DBGWVRN_EL1, 3, 1) +FIELD(HDFGRTR_EL2, MDSCR_EL1, 4, 1) +FIELD(HDFGRTR_EL2, DBGCLAIM, 5, 1) +FIELD(HDFGRTR_EL2, DBGAUTHSTATUS_EL1, 6, 1) +FIELD(HDFGRTR_EL2, DBGPRCR_EL1, 7, 1) +/* 8: RES0: OSLAR_EL1 is WO */ +FIELD(HDFGRTR_EL2, OSLSR_EL1, 9, 1) +FIELD(HDFGRTR_EL2, OSECCR_EL1, 10, 1) +FIELD(HDFGRTR_EL2, OSDLR_EL1, 11, 1) +FIELD(HDFGRTR_EL2, PMEVCNTRN_EL0, 12, 1) +FIELD(HDFGRTR_EL2, PMEVTYPERN_EL0, 13, 1) +FIELD(HDFGRTR_EL2, PMCCFILTR_EL0, 14, 1) +FIELD(HDFGRTR_EL2, PMCCNTR_EL0, 15, 1) +FIELD(HDFGRTR_EL2, PMCNTEN, 16, 1) +FIELD(HDFGRTR_EL2, PMINTEN, 17, 1) +FIELD(HDFGRTR_EL2, PMOVS, 18, 1) +FIELD(HDFGRTR_EL2, PMSELR_EL0, 19, 1) +/* 20: RES0: PMSWINC_EL0 is WO */ +/* 21: RES0: PMCR_EL0 is WO */ +FIELD(HDFGRTR_EL2, PMMIR_EL1, 22, 1) +FIELD(HDFGRTR_EL2, PMBLIMITR_EL1, 23, 1) +FIELD(HDFGRTR_EL2, PMBPTR_EL1, 24, 1) +FIELD(HDFGRTR_EL2, PMBSR_EL1, 25, 1) +FIELD(HDFGRTR_EL2, PMSCR_EL1, 26, 1) +FIELD(HDFGRTR_EL2, PMSEVFR_EL1, 27, 1) +FIELD(HDFGRTR_EL2, PMSFCR_EL1, 28, 1) +FIELD(HDFGRTR_EL2, PMSICR_EL1, 29, 1) +FIELD(HDFGRTR_EL2, PMSIDR_EL1, 30, 1) +FIELD(HDFGRTR_EL2, PMSIRR_EL1, 31, 1) +FIELD(HDFGRTR_EL2, PMSLATFR_EL1, 32, 1) +FIELD(HDFGRTR_EL2, TRC, 33, 1) +FIELD(HDFGRTR_EL2, TRCAUTHSTATUS, 34, 1) +FIELD(HDFGRTR_EL2, TRCAUXCTLR, 35, 1) +FIELD(HDFGRTR_EL2, TRCCLAIM, 36, 1) +FIELD(HDFGRTR_EL2, TRCCNTVRn, 37, 1) +/* 38, 39: RES0 */ +FIELD(HDFGRTR_EL2, TRCID, 40, 1) +FIELD(HDFGRTR_EL2, TRCIMSPECN, 41, 1) +/* 42: RES0: TRCOSLAR is WO */ +FIELD(HDFGRTR_EL2, TRCOSLSR, 43, 1) +FIELD(HDFGRTR_EL2, TRCPRGCTLR, 44, 1) +FIELD(HDFGRTR_EL2, TRCSEQSTR, 45, 1) +FIELD(HDFGRTR_EL2, TRCSSCSRN, 46, 1) +FIELD(HDFGRTR_EL2, TRCSTATR, 47, 1) +FIELD(HDFGRTR_EL2, TRCVICTLR, 48, 1) +/* 49: RES0: TRFCR_EL1 is WO */ +FIELD(HDFGRTR_EL2, TRBBASER_EL1, 50, 1) +FIELD(HDFGRTR_EL2, TRBIDR_EL1, 51, 1) +FIELD(HDFGRTR_EL2, TRBLIMITR_EL1, 52, 1) +FIELD(HDFGRTR_EL2, TRBMAR_EL1, 53, 1) +FIELD(HDFGRTR_EL2, TRBPTR_EL1, 54, 1) +FIELD(HDFGRTR_EL2, TRBSR_EL1, 55, 1) +FIELD(HDFGRTR_EL2, TRBTRG_EL1, 56, 1) +FIELD(HDFGRTR_EL2, PMUSERENR_EL0, 57, 1) +FIELD(HDFGRTR_EL2, PMCEIDN_EL0, 58, 1) +FIELD(HDFGRTR_EL2, NBRBIDR, 59, 1) +FIELD(HDFGRTR_EL2, NBRBCTL, 60, 1) +FIELD(HDFGRTR_EL2, NBRBDATA, 61, 1) +FIELD(HDFGRTR_EL2, NPMSNEVFR_EL1, 62, 1) +FIELD(HDFGRTR_EL2, PMBIDR_EL1, 63, 1) + +/* + * These match HDFGRTR_EL2, but bits for RO registers are RES0. + * A few bits are for WO registers, where the HDFGRTR_EL2 bit is RES0. + */ +FIELD(HDFGWTR_EL2, DBGBCRN_EL1, 0, 1) +FIELD(HDFGWTR_EL2, DBGBVRN_EL1, 1, 1) +FIELD(HDFGWTR_EL2, DBGWCRN_EL1, 2, 1) +FIELD(HDFGWTR_EL2, DBGWVRN_EL1, 3, 1) +FIELD(HDFGWTR_EL2, MDSCR_EL1, 4, 1) +FIELD(HDFGWTR_EL2, DBGCLAIM, 5, 1) +FIELD(HDFGWTR_EL2, DBGPRCR_EL1, 7, 1) +FIELD(HDFGWTR_EL2, OSLAR_EL1, 8, 1) +FIELD(HDFGWTR_EL2, OSLSR_EL1, 9, 1) +FIELD(HDFGWTR_EL2, OSECCR_EL1, 10, 1) +FIELD(HDFGWTR_EL2, OSDLR_EL1, 11, 1) +FIELD(HDFGWTR_EL2, PMEVCNTRN_EL0, 12, 1) +FIELD(HDFGWTR_EL2, PMEVTYPERN_EL0, 13, 1) +FIELD(HDFGWTR_EL2, PMCCFILTR_EL0, 14, 1) +FIELD(HDFGWTR_EL2, PMCCNTR_EL0, 15, 1) +FIELD(HDFGWTR_EL2, PMCNTEN, 16, 1) +FIELD(HDFGWTR_EL2, PMINTEN, 17, 1) +FIELD(HDFGWTR_EL2, PMOVS, 18, 1) +FIELD(HDFGWTR_EL2, PMSELR_EL0, 19, 1) +FIELD(HDFGWTR_EL2, PMSWINC_EL0, 20, 1) +FIELD(HDFGWTR_EL2, PMCR_EL0, 21, 1) +FIELD(HDFGWTR_EL2, PMBLIMITR_EL1, 23, 1) +FIELD(HDFGWTR_EL2, PMBPTR_EL1, 24, 1) +FIELD(HDFGWTR_EL2, PMBSR_EL1, 25, 1) +FIELD(HDFGWTR_EL2, PMSCR_EL1, 26, 1) +FIELD(HDFGWTR_EL2, PMSEVFR_EL1, 27, 1) +FIELD(HDFGWTR_EL2, PMSFCR_EL1, 28, 1) +FIELD(HDFGWTR_EL2, PMSICR_EL1, 29, 1) +FIELD(HDFGWTR_EL2, PMSIRR_EL1, 31, 1) +FIELD(HDFGWTR_EL2, PMSLATFR_EL1, 32, 1) +FIELD(HDFGWTR_EL2, TRC, 33, 1) +FIELD(HDFGWTR_EL2, TRCAUXCTLR, 35, 1) +FIELD(HDFGWTR_EL2, TRCCLAIM, 36, 1) +FIELD(HDFGWTR_EL2, TRCCNTVRn, 37, 1) +FIELD(HDFGWTR_EL2, TRCIMSPECN, 41, 1) +FIELD(HDFGWTR_EL2, TRCOSLAR, 42, 1) +FIELD(HDFGWTR_EL2, TRCPRGCTLR, 44, 1) +FIELD(HDFGWTR_EL2, TRCSEQSTR, 45, 1) +FIELD(HDFGWTR_EL2, TRCSSCSRN, 46, 1) +FIELD(HDFGWTR_EL2, TRCVICTLR, 48, 1) +FIELD(HDFGWTR_EL2, TRFCR_EL1, 49, 1) +FIELD(HDFGWTR_EL2, TRBBASER_EL1, 50, 1) +FIELD(HDFGWTR_EL2, TRBLIMITR_EL1, 52, 1) +FIELD(HDFGWTR_EL2, TRBMAR_EL1, 53, 1) +FIELD(HDFGWTR_EL2, TRBPTR_EL1, 54, 1) +FIELD(HDFGWTR_EL2, TRBSR_EL1, 55, 1) +FIELD(HDFGWTR_EL2, TRBTRG_EL1, 56, 1) +FIELD(HDFGWTR_EL2, PMUSERENR_EL0, 57, 1) +FIELD(HDFGWTR_EL2, NBRBCTL, 60, 1) +FIELD(HDFGWTR_EL2, NBRBDATA, 61, 1) +FIELD(HDFGWTR_EL2, NPMSNEVFR_EL1, 62, 1) + typedef struct ARMCPRegInfo ARMCPRegInfo; /* diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint64_t disr_el1; uint64_t vdisr_el2; uint64_t vsesr_el2; + + /* + * Fine-Grained Trap registers. We store these as arrays so the + * access checking code doesn't have to manually select + * HFGRTR_EL2 vs HFDFGRTR_EL2 etc when looking up the bit to test. + * FEAT_FGT2 will add more elements to these arrays. + */ + uint64_t fgt_read[2]; /* HFGRTR, HDFGRTR */ + uint64_t fgt_write[2]; /* HFGWTR, HDFGWTR */ + uint64_t fgt_exec[1]; /* HFGITR */ } cp15; struct { @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_tgran64_2(const ARMISARegisters *id) return t >= 2 || (t == 0 && isar_feature_aa64_tgran64(id)); } +static inline bool isar_feature_aa64_fgt(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64mmfr0, ID_AA64MMFR0, FGT) != 0; +} + static inline bool isar_feature_aa64_ccidx(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, CCIDX) != 0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_hcx, cpu)) { valid_mask |= SCR_HXEN; } + if (cpu_isar_feature(aa64_fgt, cpu)) { + valid_mask |= SCR_FGTEN; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo scxtnum_reginfo[] = { .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, scxtnum_el[3]) }, }; + +static CPAccessResult access_fgt(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 2 && + arm_feature(env, ARM_FEATURE_EL3) && !(env->cp15.scr_el3 & SCR_FGTEN)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo fgt_reginfo[] = { + { .name = "HFGRTR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, + .access = PL2_RW, .accessfn = access_fgt, + .fieldoffset = offsetof(CPUARMState, cp15.fgt_read[FGTREG_HFGRTR]) }, + { .name = "HFGWTR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 5, + .access = PL2_RW, .accessfn = access_fgt, + .fieldoffset = offsetof(CPUARMState, cp15.fgt_write[FGTREG_HFGWTR]) }, + { .name = "HDFGRTR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 1, .opc2 = 4, + .access = PL2_RW, .accessfn = access_fgt, + .fieldoffset = offsetof(CPUARMState, cp15.fgt_read[FGTREG_HDFGRTR]) }, + { .name = "HDFGWTR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 1, .opc2 = 5, + .access = PL2_RW, .accessfn = access_fgt, + .fieldoffset = offsetof(CPUARMState, cp15.fgt_write[FGTREG_HDFGWTR]) }, + { .name = "HFGITR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 6, + .access = PL2_RW, .accessfn = access_fgt, + .fieldoffset = offsetof(CPUARMState, cp15.fgt_exec[FGTREG_HFGITR]) }, +}; #endif /* TARGET_AARCH64 */ static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_scxtnum, cpu)) { define_arm_cp_regs(cpu, scxtnum_reginfo); } + + if (cpu_isar_feature(aa64_fgt, cpu)) { + define_arm_cp_regs(cpu, fgt_reginfo); + } #endif if (cpu_isar_feature(any_predinv, cpu)) { -- 2.34.1 Implement the machinery for fine-grained traps on normal sysregs. Any sysreg with a fine-grained trap will set the new field to indicate which FGT register bit it should trap on. FGT traps only happen when an AArch64 EL2 enables them for an AArch64 EL1. They therefore are only relevant for AArch32 cpregs when the cpreg can be accessed from EL0. The logic in access_check_cp_reg() will check this, so it is safe to add a .fgt marking to an ARM_CP_STATE_BOTH ARMCPRegInfo. The DO_BIT and DO_REV_BIT macros define enum constants FGT_##bitname which can be used to specify the FGT bit, eg .fgt = FGT_AFSR0_EL1 (We assume that there is no bit name duplication across the FGT registers, for brevity's sake.) Subsequent commits will add the .fgt fields to the relevant register definitions and define the FGT_nnn values for them. Note that some of the FGT traps are for instructions that we don't handle via the cpregs mechanisms (mostly these are instruction traps). Those we will have to handle separately. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-10-peter.maydell@linaro.org Message-id: 20230127175507.2895013-10-peter.maydell@linaro.org --- target/arm/cpregs.h | 72 ++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 1 + target/arm/internals.h | 20 +++++++++++ target/arm/translate.h | 2 ++ target/arm/helper.c | 9 +++++ target/arm/op_helper.c | 30 ++++++++++++++++ target/arm/translate-a64.c | 3 +- target/arm/translate.c | 2 ++ 8 files changed, 138 insertions(+), 1 deletion(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ FIELD(HDFGWTR_EL2, NBRBCTL, 60, 1) FIELD(HDFGWTR_EL2, NBRBDATA, 61, 1) FIELD(HDFGWTR_EL2, NPMSNEVFR_EL1, 62, 1) +/* Which fine-grained trap bit register to check, if any */ +FIELD(FGT, TYPE, 10, 3) +FIELD(FGT, REV, 9, 1) /* Is bit sense reversed? */ +FIELD(FGT, IDX, 6, 3) /* Index within a uint64_t[] array */ +FIELD(FGT, BITPOS, 0, 6) /* Bit position within the uint64_t */ + +/* + * Macros to define FGT_##bitname enum constants to use in ARMCPRegInfo::fgt + * fields. We assume for brevity's sake that there are no duplicated + * bit names across the various FGT registers. + */ +#define DO_BIT(REG, BITNAME) \ + FGT_##BITNAME = FGT_##REG | R_##REG##_EL2_##BITNAME##_SHIFT + +/* Some bits have reversed sense, so 0 means trap and 1 means not */ +#define DO_REV_BIT(REG, BITNAME) \ + FGT_##BITNAME = FGT_##REG | FGT_REV | R_##REG##_EL2_##BITNAME##_SHIFT + +typedef enum FGTBit { + /* + * These bits tell us which register arrays to use: + * if FGT_R is set then reads are checked against fgt_read[]; + * if FGT_W is set then writes are checked against fgt_write[]; + * if FGT_EXEC is set then all accesses are checked against fgt_exec[]. + * + * For almost all bits in the R/W register pairs, the bit exists in + * both registers for a RW register, in HFGRTR/HDFGRTR for a RO register + * with the corresponding HFGWTR/HDFGTWTR bit being RES0, and vice-versa + * for a WO register. There are unfortunately a couple of exceptions + * (PMCR_EL0, TRFCR_EL1) where the register being trapped is RW but + * the FGT system only allows trapping of writes, not reads. + * + * Note that we arrange these bits so that a 0 FGTBit means "no trap". + */ + FGT_R = 1 << R_FGT_TYPE_SHIFT, + FGT_W = 2 << R_FGT_TYPE_SHIFT, + FGT_EXEC = 4 << R_FGT_TYPE_SHIFT, + FGT_RW = FGT_R | FGT_W, + /* Bit to identify whether trap bit is reversed sense */ + FGT_REV = R_FGT_REV_MASK, + + /* + * If a bit exists in HFGRTR/HDFGRTR then either the register being + * trapped is RO or the bit also exists in HFGWTR/HDFGWTR, so we either + * want to trap for both reads and writes or else it's harmless to mark + * it as trap-on-writes. + * If a bit exists only in HFGWTR/HDFGWTR then either the register being + * trapped is WO, or else it is one of the two oddball special cases + * which are RW but have only a write trap. We mark these as only + * FGT_W so we get the right behaviour for those special cases. + * (If a bit was added in future that provided only a read trap for an + * RW register we'd need to do something special to get the FGT_R bit + * only. But this seems unlikely to happen.) + * + * So for the DO_BIT/DO_REV_BIT macros: use FGT_HFGRTR/FGT_HDFGRTR if + * the bit exists in that register. Otherwise use FGT_HFGWTR/FGT_HDFGWTR. + */ + FGT_HFGRTR = FGT_RW | (FGTREG_HFGRTR << R_FGT_IDX_SHIFT), + FGT_HFGWTR = FGT_W | (FGTREG_HFGWTR << R_FGT_IDX_SHIFT), + FGT_HDFGRTR = FGT_RW | (FGTREG_HDFGRTR << R_FGT_IDX_SHIFT), + FGT_HDFGWTR = FGT_W | (FGTREG_HDFGWTR << R_FGT_IDX_SHIFT), + FGT_HFGITR = FGT_EXEC | (FGTREG_HFGITR << R_FGT_IDX_SHIFT), +} FGTBit; + +#undef DO_BIT +#undef DO_REV_BIT + typedef struct ARMCPRegInfo ARMCPRegInfo; /* @@ -XXX,XX +XXX,XX @@ struct ARMCPRegInfo { CPAccessRights access; /* Security state: ARM_CP_SECSTATE_* bits/values */ CPSecureState secure; + /* + * Which fine-grained trap register bit to check, if any. This + * value encodes both the trap register and bit within it. + */ + FGTBit fgt; /* * The opaque pointer passed to define_arm_cp_regs_with_opaque() when * this register was defined: can be used to hand data through to the diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2) /* Memory operations require alignment: SCTLR_ELx.A or CCR.UNALIGN_TRP */ FIELD(TBFLAG_ANY, ALIGN_MEM, 10, 1) FIELD(TBFLAG_ANY, PSTATE__IL, 11, 1) +FIELD(TBFLAG_ANY, FGT_ACTIVE, 12, 1) /* * Bit usage when in AArch32 state, both A- and M-profile. diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t arm_mdcr_el2_eff(CPUARMState *env) ((1 << (1 - 1)) | (1 << (2 - 1)) | \ (1 << (4 - 1)) | (1 << (8 - 1)) | (1 << (16 - 1))) +/* + * Return true if it is possible to take a fine-grained-trap to EL2. + */ +static inline bool arm_fgt_active(CPUARMState *env, int el) +{ + /* + * The Arm ARM only requires the "{E2H,TGE} != {1,1}" test for traps + * that can affect EL0, but it is harmless to do the test also for + * traps on registers that are only accessible at EL1 because if the test + * returns true then we can't be executing at EL1 anyway. + * FGT traps only happen when EL2 is enabled and EL1 is AArch64; + * traps from AArch32 only happen for the EL0 is AArch32 case. + */ + return cpu_isar_feature(aa64_fgt, env_archcpu(env)) && + el < 2 && arm_is_el2_enabled(env) && + arm_el_is_aa64(env, 1) && + (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE) && + (!arm_feature(env, ARM_FEATURE_EL3) || (env->cp15.scr_el3 & SCR_FGTEN)); +} + #endif diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool is_nonstreaming; /* True if MVE insns are definitely not predicated by VPR or LTPSIZE */ bool mve_no_pred; + /* True if fine-grained traps are active */ + bool fgt_active; /* * >= 0, a copy of PSTATE.BTYPE, which will be 0 without v8.5-BTI. * < 0, set by the current instruction. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_common(CPUARMState *env, int fp_el, if (arm_singlestep_active(env)) { DP_TBFLAG_ANY(flags, SS_ACTIVE, 1); } + return flags; } @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, DP_TBFLAG_A32(flags, HSTR_ACTIVE, 1); } + if (arm_fgt_active(env, el)) { + DP_TBFLAG_ANY(flags, FGT_ACTIVE, 1); + } + if (env->uncached_cpsr & CPSR_IL) { DP_TBFLAG_ANY(flags, PSTATE__IL, 1); } @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, DP_TBFLAG_ANY(flags, PSTATE__IL, 1); } + if (arm_fgt_active(env, el)) { + DP_TBFLAG_ANY(flags, FGT_ACTIVE, 1); + } + if (cpu_isar_feature(aa64_mte, env_archcpu(env))) { /* * Set MTE_ACTIVE if any access may be Checked, and leave clear diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, } } + /* + * Fine-grained traps also are lower priority than undef-to-EL1, + * higher priority than trap-to-EL3, and we don't care about priority + * order with other EL2 traps because the syndrome value is the same. + */ + if (arm_fgt_active(env, arm_current_el(env))) { + uint64_t trapword = 0; + unsigned int idx = FIELD_EX32(ri->fgt, FGT, IDX); + unsigned int bitpos = FIELD_EX32(ri->fgt, FGT, BITPOS); + bool rev = FIELD_EX32(ri->fgt, FGT, REV); + bool trapbit; + + if (ri->fgt & FGT_EXEC) { + assert(idx < ARRAY_SIZE(env->cp15.fgt_exec)); + trapword = env->cp15.fgt_exec[idx]; + } else if (isread && (ri->fgt & FGT_R)) { + assert(idx < ARRAY_SIZE(env->cp15.fgt_read)); + trapword = env->cp15.fgt_read[idx]; + } else if (!isread && (ri->fgt & FGT_W)) { + assert(idx < ARRAY_SIZE(env->cp15.fgt_write)); + trapword = env->cp15.fgt_write[idx]; + } + + trapbit = extract64(trapword, bitpos, 1); + if (trapbit != rev) { + res = CP_ACCESS_TRAP_EL2; + goto fail; + } + } + if (likely(res == CP_ACCESS_OK)) { return ri; } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, return; } - if (ri->accessfn) { + if (ri->accessfn || (ri->fgt && s->fgt_active)) { /* Emit code to perform further access permissions checks at * runtime; this may result in an exception. */ @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL); dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL); + dc->fgt_active = EX_TBFLAG_ANY(tb_flags, FGT_ACTIVE); dc->sve_excp_el = EX_TBFLAG_A64(tb_flags, SVEEXC_EL); dc->sme_excp_el = EX_TBFLAG_A64(tb_flags, SMEEXC_EL); dc->vl = (EX_TBFLAG_A64(tb_flags, VL) + 1) * 16; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void do_coproc_insn(DisasContext *s, int cpnum, int is64, } if ((s->hstr_active && s->current_el == 0) || ri->accessfn || + (ri->fgt && s->fgt_active) || (arm_dc_feature(s, ARM_FEATURE_XSCALE) && cpnum < 14)) { /* * Emit code to perform further access permissions checks at @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL); dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL); + dc->fgt_active = EX_TBFLAG_ANY(tb_flags, FGT_ACTIVE); if (arm_feature(env, ARM_FEATURE_M)) { dc->vfp_enabled = 1; -- 2.34.1 Mark up the sysreg definitions for the registers trapped by HFGRTR/HFGWTR bits 0..11. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-11-peter.maydell@linaro.org Message-id: 20230127175507.2895013-11-peter.maydell@linaro.org --- target/arm/cpregs.h | 14 ++++++++++++++ target/arm/helper.c | 17 +++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { FGT_HDFGRTR = FGT_RW | (FGTREG_HDFGRTR << R_FGT_IDX_SHIFT), FGT_HDFGWTR = FGT_W | (FGTREG_HDFGWTR << R_FGT_IDX_SHIFT), FGT_HFGITR = FGT_EXEC | (FGTREG_HFGITR << R_FGT_IDX_SHIFT), + + /* Trap bits in HFGRTR_EL2 / HFGWTR_EL2, starting from bit 0. */ + DO_BIT(HFGRTR, AFSR0_EL1), + DO_BIT(HFGRTR, AFSR1_EL1), + DO_BIT(HFGRTR, AIDR_EL1), + DO_BIT(HFGRTR, AMAIR_EL1), + DO_BIT(HFGRTR, APDAKEY), + DO_BIT(HFGRTR, APDBKEY), + DO_BIT(HFGRTR, APGAKEY), + DO_BIT(HFGRTR, APIAKEY), + DO_BIT(HFGRTR, APIBKEY), + DO_BIT(HFGRTR, CCSIDR_EL1), + DO_BIT(HFGRTR, CLIDR_EL1), + DO_BIT(HFGRTR, CONTEXTIDR_EL1), } FGTBit; #undef DO_BIT diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { { .name = "CONTEXTIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_CONTEXTIDR_EL1, .secure = ARM_CP_SECSTATE_NS, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0, .access = PL1_R, .accessfn = access_tid4, + .fgt = FGT_CCSIDR_EL1, .readfn = ccsidr_read, .type = ARM_CP_NO_RAW }, { .name = "CSSELR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 7, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid1, + .fgt = FGT_AIDR_EL1, .resetvalue = 0 }, /* * Auxiliary fault status registers: these also are IMPDEF, and we @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_AFSR0_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_AFSR1_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, /* * MAIR can just read-as-written because we don't implement caches @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lpae_cp_reginfo[] = { { .name = "AMAIR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_AMAIR_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, /* AMAIR1 is mapped to AMAIR_EL1[63:32] */ { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pauth_reginfo[] = { { .name = "APDAKEYLO_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 0, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APDAKEY, .fieldoffset = offsetof(CPUARMState, keys.apda.lo) }, { .name = "APDAKEYHI_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 1, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APDAKEY, .fieldoffset = offsetof(CPUARMState, keys.apda.hi) }, { .name = "APDBKEYLO_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 2, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APDBKEY, .fieldoffset = offsetof(CPUARMState, keys.apdb.lo) }, { .name = "APDBKEYHI_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 3, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APDBKEY, .fieldoffset = offsetof(CPUARMState, keys.apdb.hi) }, { .name = "APGAKEYLO_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 0, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APGAKEY, .fieldoffset = offsetof(CPUARMState, keys.apga.lo) }, { .name = "APGAKEYHI_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 1, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APGAKEY, .fieldoffset = offsetof(CPUARMState, keys.apga.hi) }, { .name = "APIAKEYLO_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 0, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APIAKEY, .fieldoffset = offsetof(CPUARMState, keys.apia.lo) }, { .name = "APIAKEYHI_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 1, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APIAKEY, .fieldoffset = offsetof(CPUARMState, keys.apia.hi) }, { .name = "APIBKEYLO_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 2, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APIBKEY, .fieldoffset = offsetof(CPUARMState, keys.apib.lo) }, { .name = "APIBKEYHI_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 3, .access = PL1_RW, .accessfn = access_pauth, + .fgt = FGT_APIBKEY, .fieldoffset = offsetof(CPUARMState, keys.apib.hi) }, }; @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_tid4, + .fgt = FGT_CLIDR_EL1, .resetvalue = cpu->clidr }; define_one_arm_cp_reg(cpu, &clidr); -- 2.34.1 Mark up the sysreg definitions for the registers trapped by HFGRTR/HFGWTR bits 12..23. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-12-peter.maydell@linaro.org Message-id: 20230127175507.2895013-12-peter.maydell@linaro.org --- target/arm/cpregs.h | 12 ++++++++++++ target/arm/helper.c | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HFGRTR, CCSIDR_EL1), DO_BIT(HFGRTR, CLIDR_EL1), DO_BIT(HFGRTR, CONTEXTIDR_EL1), + DO_BIT(HFGRTR, CPACR_EL1), + DO_BIT(HFGRTR, CSSELR_EL1), + DO_BIT(HFGRTR, CTR_EL0), + DO_BIT(HFGRTR, DCZID_EL0), + DO_BIT(HFGRTR, ESR_EL1), + DO_BIT(HFGRTR, FAR_EL1), + DO_BIT(HFGRTR, ISR_EL1), + DO_BIT(HFGRTR, LORC_EL1), + DO_BIT(HFGRTR, LOREA_EL1), + DO_BIT(HFGRTR, LORID_EL1), + DO_BIT(HFGRTR, LORN_EL1), + DO_BIT(HFGRTR, LORSA_EL1), } FGTBit; #undef DO_BIT diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, }, { .name = "CPACR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access, + .fgt = FGT_CPACR_EL1, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1), .resetfn = cpacr_reset, .writefn = cpacr_write, .readfn = cpacr_read }, }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0, .access = PL1_RW, .accessfn = access_tid4, + .fgt = FGT_CSSELR_EL1, .writefn = csselr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s), offsetof(CPUARMState, cp15.csselr_ns) } }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .resetfn = arm_cp_reset_ignore }, { .name = "ISR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 0, + .fgt = FGT_ISR_EL1, .type = ARM_CP_NO_RAW, .access = PL1_R, .readfn = isr_read }, /* 32 bit ITLB invalidates */ { .name = "ITLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { { .name = "FAR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_FAR_EL1, .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), .resetvalue = 0, }, }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { { .name = "ESR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_ESR_EL1, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, }, { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCZID_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .opc2 = 7, .crn = 0, .crm = 0, .access = PL0_R, .type = ARM_CP_NO_RAW, + .fgt = FGT_DCZID_EL0, .readfn = aa64_dczid_read }, { .name = "DC_ZVA", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lor_reginfo[] = { { .name = "LORSA_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 0, .access = PL1_RW, .accessfn = access_lor_other, + .fgt = FGT_LORSA_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "LOREA_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 1, .access = PL1_RW, .accessfn = access_lor_other, + .fgt = FGT_LOREA_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "LORN_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 2, .access = PL1_RW, .accessfn = access_lor_other, + .fgt = FGT_LORN_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "LORC_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 3, .access = PL1_RW, .accessfn = access_lor_other, + .fgt = FGT_LORC_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "LORID_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 7, .access = PL1_R, .accessfn = access_lor_ns, + .fgt = FGT_LORID_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, }; @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "CTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 0, .crm = 0, .access = PL0_R, .accessfn = ctr_el0_access, + .fgt = FGT_CTR_EL0, .type = ARM_CP_CONST, .resetvalue = cpu->ctr }, /* TCMTR and TLBTR exist in v8 but have no 64-bit versions */ { .name = "TCMTR", -- 2.34.1 Mark up the sysreg definitions for the registers trapped by HFGRTR/HFGWTR bits 24..35. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-13-peter.maydell@linaro.org Message-id: 20230127175507.2895013-13-peter.maydell@linaro.org --- target/arm/cpregs.h | 12 ++++++++++++ target/arm/helper.c | 14 ++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HFGRTR, LORID_EL1), DO_BIT(HFGRTR, LORN_EL1), DO_BIT(HFGRTR, LORSA_EL1), + DO_BIT(HFGRTR, MAIR_EL1), + DO_BIT(HFGRTR, MIDR_EL1), + DO_BIT(HFGRTR, MPIDR_EL1), + DO_BIT(HFGRTR, PAR_EL1), + DO_BIT(HFGRTR, REVIDR_EL1), + DO_BIT(HFGRTR, SCTLR_EL1), + DO_BIT(HFGRTR, SCXTNUM_EL1), + DO_BIT(HFGRTR, SCXTNUM_EL0), + DO_BIT(HFGRTR, TCR_EL1), + DO_BIT(HFGRTR, TPIDR_EL1), + DO_BIT(HFGRTR, TPIDRRO_EL0), + DO_BIT(HFGRTR, TPIDR_EL0), } FGTBit; #undef DO_BIT diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_MAIR_EL1, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), .resetvalue = 0 }, { .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { { .name = "TPIDR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .opc2 = 2, .crn = 13, .crm = 0, .access = PL0_RW, + .fgt = FGT_TPIDR_EL0, .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[0]), .resetvalue = 0 }, { .name = "TPIDRURW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 2, .access = PL0_RW, + .fgt = FGT_TPIDR_EL0, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidrurw_s), offsetoflow32(CPUARMState, cp15.tpidrurw_ns) }, .resetfn = arm_cp_reset_ignore }, { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0, .access = PL0_R | PL1_W, + .fgt = FGT_TPIDRRO_EL0, .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]), .resetvalue = 0}, { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3, .access = PL0_R | PL1_W, + .fgt = FGT_TPIDRRO_EL0, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s), offsetoflow32(CPUARMState, cp15.tpidruro_ns) }, .resetfn = arm_cp_reset_ignore }, { .name = "TPIDR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .opc2 = 4, .crn = 13, .crm = 0, .access = PL1_RW, + .fgt = FGT_TPIDR_EL1, .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[1]), .resetvalue = 0 }, { .name = "TPIDRPRW", .opc1 = 0, .cp = 15, .crn = 13, .crm = 0, .opc2 = 4, .access = PL1_RW, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_TCR_EL1, .writefn = vmsa_tcr_el12_write, .raw_writefn = raw_write, .resetvalue = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .type = ARM_CP_ALIAS, .opc0 = 3, .opc1 = 0, .crn = 7, .crm = 4, .opc2 = 0, .access = PL1_RW, .resetvalue = 0, + .fgt = FGT_PAR_EL1, .fieldoffset = offsetof(CPUARMState, cp15.par_el[1]), .writefn = par_write }, #endif @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo scxtnum_reginfo[] = { { .name = "SCXTNUM_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 7, .access = PL0_RW, .accessfn = access_scxtnum, + .fgt = FGT_SCXTNUM_EL0, .fieldoffset = offsetof(CPUARMState, scxtnum_el[0]) }, { .name = "SCXTNUM_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 7, .access = PL1_RW, .accessfn = access_scxtnum, + .fgt = FGT_SCXTNUM_EL1, .fieldoffset = offsetof(CPUARMState, scxtnum_el[1]) }, { .name = "SCXTNUM_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 7, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "MIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 0, .access = PL1_R, .type = ARM_CP_NO_RAW, .resetvalue = cpu->midr, + .fgt = FGT_MIDR_EL1, .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid), .readfn = midr_read }, /* crn = 0 op1 = 0 crm = 0 op2 = 7 : AArch32 aliases of MIDR */ @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 6, .access = PL1_R, .accessfn = access_aa64_tid1, + .fgt = FGT_REVIDR_EL1, .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, }; ARMCPRegInfo id_v8_midr_alias_cp_reginfo = { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo mpidr_cp_reginfo[] = { { .name = "MPIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5, + .fgt = FGT_MPIDR_EL1, .access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_RAW }, }; #ifdef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .name = "SCTLR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_SCTLR_EL1, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), offsetof(CPUARMState, cp15.sctlr_ns) }, .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, -- 2.34.1 Mark up the sysreg definitions for the registers trapped by HFGRTR/HFGWTR bits 36..63. Of these, some correspond to RAS registers which we implement as always-UNDEF: these don't need any extra handling for FGT because the UNDEF-to-EL1 always takes priority over any theoretical FGT-trap-to-EL2. Bit 50 (NACCDATA_EL1) is for the ACCDATA_EL1 register which is part of the FEAT_LS64_ACCDATA feature which we don't yet implement. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-14-peter.maydell@linaro.org Message-id: 20230127175507.2895013-14-peter.maydell@linaro.org --- target/arm/cpregs.h | 7 +++++++ hw/intc/arm_gicv3_cpuif.c | 2 ++ target/arm/helper.c | 10 ++++++++++ 3 files changed, 19 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HFGRTR, TPIDR_EL1), DO_BIT(HFGRTR, TPIDRRO_EL0), DO_BIT(HFGRTR, TPIDR_EL0), + DO_BIT(HFGRTR, TTBR0_EL1), + DO_BIT(HFGRTR, TTBR1_EL1), + DO_BIT(HFGRTR, VBAR_EL1), + DO_BIT(HFGRTR, ICC_IGRPENN_EL1), + DO_BIT(HFGRTR, ERRIDR_EL1), + DO_REV_BIT(HFGRTR, NSMPRI_EL1), + DO_REV_BIT(HFGRTR, NTPIDR2_EL0), } FGTBit; #undef DO_BIT diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 6, .type = ARM_CP_IO | ARM_CP_NO_RAW, .access = PL1_RW, .accessfn = gicv3_fiq_access, + .fgt = FGT_ICC_IGRPENN_EL1, .readfn = icc_igrpen_read, .writefn = icc_igrpen_write, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 7, .type = ARM_CP_IO | ARM_CP_NO_RAW, .access = PL1_RW, .accessfn = gicv3_irq_access, + .fgt = FGT_ICC_IGRPENN_EL1, .readfn = icc_igrpen_read, .writefn = icc_igrpen_write, }, diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_TTBR0_EL1, .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) } }, { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1, .access = PL1_RW, .accessfn = access_tvm_trvm, + .fgt = FGT_TTBR1_EL1, .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) } }, @@ -XXX,XX +XXX,XX @@ static void disr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) * ERRSELR_EL1 * may generate UNDEFINED, which is the effect we get by not * listing them at all. + * + * These registers have fine-grained trap bits, but UNDEF-to-EL1 + * is higher priority than FGT-to-EL2 so we do not need to list them + * in order to check for an FGT. */ static const ARMCPRegInfo minimal_ras_reginfo[] = { { .name = "DISR_EL1", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo minimal_ras_reginfo[] = { { .name = "ERRIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 3, .opc2 = 0, .access = PL1_R, .accessfn = access_terr, + .fgt = FGT_ERRIDR_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo sme_reginfo[] = { { .name = "TPIDR2_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 5, .access = PL0_RW, .accessfn = access_tpidr2, + .fgt = FGT_NTPIDR2_EL0, .fieldoffset = offsetof(CPUARMState, cp15.tpidr2_el0) }, { .name = "SVCR", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo sme_reginfo[] = { { .name = "SMPRI_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 4, .access = PL1_RW, .accessfn = access_esm, + .fgt = FGT_NSMPRI_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "SMPRIMAP_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 5, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "VBAR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .writefn = vbar_write, + .fgt = FGT_VBAR_EL1, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.vbar_s), offsetof(CPUARMState, cp15.vbar_ns) }, .resetvalue = 0 }, -- 2.34.1 Mark up the sysreg definitons for the registers trapped by HDFGRTR/HDFGWTR bits 0..11. These cover various debug related registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-15-peter.maydell@linaro.org Message-id: 20230127175507.2895013-15-peter.maydell@linaro.org --- target/arm/cpregs.h | 12 ++++++++++++ target/arm/debug_helper.c | 11 +++++++++++ 2 files changed, 23 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HFGRTR, ERRIDR_EL1), DO_REV_BIT(HFGRTR, NSMPRI_EL1), DO_REV_BIT(HFGRTR, NTPIDR2_EL0), + + /* Trap bits in HDFGRTR_EL2 / HDFGWTR_EL2, starting from bit 0. */ + DO_BIT(HDFGRTR, DBGBCRN_EL1), + DO_BIT(HDFGRTR, DBGBVRN_EL1), + DO_BIT(HDFGRTR, DBGWCRN_EL1), + DO_BIT(HDFGRTR, DBGWVRN_EL1), + DO_BIT(HDFGRTR, MDSCR_EL1), + DO_BIT(HDFGRTR, DBGCLAIM), + DO_BIT(HDFGWTR, OSLAR_EL1), + DO_BIT(HDFGRTR, OSLSR_EL1), + DO_BIT(HDFGRTR, OSECCR_EL1), + DO_BIT(HDFGRTR, OSDLR_EL1), } FGTBit; #undef DO_BIT diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { { .name = "MDSCR_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2, .access = PL1_RW, .accessfn = access_tda, + .fgt = FGT_MDSCR_EL1, .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1), .resetvalue = 0 }, /* @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { { .name = "OSECCR_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 2, .access = PL1_RW, .accessfn = access_tda, + .fgt = FGT_OSECCR_EL1, .type = ARM_CP_CONST, .resetvalue = 0 }, /* * DBGDSCRint[15,12,5:2] map to MDSCR_EL1[15,12,5:2]. Map all bits as @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 4, .access = PL1_W, .type = ARM_CP_NO_RAW, .accessfn = access_tdosa, + .fgt = FGT_OSLAR_EL1, .writefn = oslar_write }, { .name = "OSLSR_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 4, .access = PL1_R, .resetvalue = 10, .accessfn = access_tdosa, + .fgt = FGT_OSLSR_EL1, .fieldoffset = offsetof(CPUARMState, cp15.oslsr_el1) }, /* Dummy OSDLR_EL1: 32-bit Linux will read this */ { .name = "OSDLR_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 4, .access = PL1_RW, .accessfn = access_tdosa, + .fgt = FGT_OSDLR_EL1, .writefn = osdlr_write, .fieldoffset = offsetof(CPUARMState, cp15.osdlr_el1) }, /* @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 6, .type = ARM_CP_ALIAS, .access = PL1_RW, .accessfn = access_tda, + .fgt = FGT_DBGCLAIM, .writefn = dbgclaimset_write, .readfn = dbgclaimset_read }, { .name = "DBGCLAIMCLR_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 6, .access = PL1_RW, .accessfn = access_tda, + .fgt = FGT_DBGCLAIM, .writefn = dbgclaimclr_write, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.dbgclaim) }, }; @@ -XXX,XX +XXX,XX @@ void define_debug_regs(ARMCPU *cpu) { .name = dbgbvr_el1_name, .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 4, .access = PL1_RW, .accessfn = access_tda, + .fgt = FGT_DBGBVRN_EL1, .fieldoffset = offsetof(CPUARMState, cp15.dbgbvr[i]), .writefn = dbgbvr_write, .raw_writefn = raw_write }, { .name = dbgbcr_el1_name, .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 5, .access = PL1_RW, .accessfn = access_tda, + .fgt = FGT_DBGBCRN_EL1, .fieldoffset = offsetof(CPUARMState, cp15.dbgbcr[i]), .writefn = dbgbcr_write, .raw_writefn = raw_write }, @@ -XXX,XX +XXX,XX @@ void define_debug_regs(ARMCPU *cpu) { .name = dbgwvr_el1_name, .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 6, .access = PL1_RW, .accessfn = access_tda, + .fgt = FGT_DBGWVRN_EL1, .fieldoffset = offsetof(CPUARMState, cp15.dbgwvr[i]), .writefn = dbgwvr_write, .raw_writefn = raw_write }, { .name = dbgwcr_el1_name, .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 7, .access = PL1_RW, .accessfn = access_tda, + .fgt = FGT_DBGWCRN_EL1, .fieldoffset = offsetof(CPUARMState, cp15.dbgwcr[i]), .writefn = dbgwcr_write, .raw_writefn = raw_write }, -- 2.34.1 Mark up the sysreg definitions for the registers trapped by HDFGRTR/HDFGWTR bits 12..x. Bits 12..22 and bit 58 are for PMU registers. The remaining bits in HDFGRTR/HDFGWTR are for traps on registers that are part of features we don't implement: Bits 23..32 and 63 : FEAT_SPE Bits 33..48 : FEAT_ETE Bits 50..56 : FEAT_TRBE Bits 59..61 : FEAT_BRBE Bit 62 : FEAT_SPEv1p2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-16-peter.maydell@linaro.org Message-id: 20230127175507.2895013-16-peter.maydell@linaro.org --- target/arm/cpregs.h | 12 ++++++++++++ target/arm/helper.c | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HDFGRTR, OSLSR_EL1), DO_BIT(HDFGRTR, OSECCR_EL1), DO_BIT(HDFGRTR, OSDLR_EL1), + DO_BIT(HDFGRTR, PMEVCNTRN_EL0), + DO_BIT(HDFGRTR, PMEVTYPERN_EL0), + DO_BIT(HDFGRTR, PMCCFILTR_EL0), + DO_BIT(HDFGRTR, PMCCNTR_EL0), + DO_BIT(HDFGRTR, PMCNTEN), + DO_BIT(HDFGRTR, PMINTEN), + DO_BIT(HDFGRTR, PMOVS), + DO_BIT(HDFGRTR, PMSELR_EL0), + DO_BIT(HDFGWTR, PMSWINC_EL0), + DO_BIT(HDFGWTR, PMCR_EL0), + DO_BIT(HDFGRTR, PMMIR_EL1), + DO_BIT(HDFGRTR, PMCEIDN_EL0), } FGTBit; #undef DO_BIT diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten), .writefn = pmcntenset_write, .accessfn = pmreg_access, + .fgt = FGT_PMCNTEN, .raw_writefn = raw_write }, { .name = "PMCNTENSET_EL0", .state = ARM_CP_STATE_AA64, .type = ARM_CP_IO, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 1, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMCNTEN, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), .resetvalue = 0, .writefn = pmcntenset_write, .raw_writefn = raw_write }, { .name = "PMCNTENCLR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 2, .access = PL0_RW, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten), .accessfn = pmreg_access, + .fgt = FGT_PMCNTEN, .writefn = pmcntenclr_write, .type = ARM_CP_ALIAS | ARM_CP_IO }, { .name = "PMCNTENCLR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 2, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMCNTEN, .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), .writefn = pmcntenclr_write }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .access = PL0_RW, .type = ARM_CP_IO, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), .accessfn = pmreg_access, + .fgt = FGT_PMOVS, .writefn = pmovsr_write, .raw_writefn = raw_write }, { .name = "PMOVSCLR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 3, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMOVS, .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsr_write, .raw_writefn = raw_write }, { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4, .access = PL0_W, .accessfn = pmreg_access_swinc, + .fgt = FGT_PMSWINC_EL0, .type = ARM_CP_NO_RAW | ARM_CP_IO, .writefn = pmswinc_write }, { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4, .access = PL0_W, .accessfn = pmreg_access_swinc, + .fgt = FGT_PMSWINC_EL0, .type = ARM_CP_NO_RAW | ARM_CP_IO, .writefn = pmswinc_write }, { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5, .access = PL0_RW, .type = ARM_CP_ALIAS, + .fgt = FGT_PMSELR_EL0, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr), .accessfn = pmreg_access_selr, .writefn = pmselr_write, .raw_writefn = raw_write}, { .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 5, .access = PL0_RW, .accessfn = pmreg_access_selr, + .fgt = FGT_PMSELR_EL0, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr), .writefn = pmselr_write, .raw_writefn = raw_write, }, { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0, .access = PL0_RW, .resetvalue = 0, .type = ARM_CP_ALIAS | ARM_CP_IO, + .fgt = FGT_PMCCNTR_EL0, .readfn = pmccntr_read, .writefn = pmccntr_write32, .accessfn = pmreg_access_ccntr }, { .name = "PMCCNTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0, .access = PL0_RW, .accessfn = pmreg_access_ccntr, + .fgt = FGT_PMCCNTR_EL0, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt), .readfn = pmccntr_read, .writefn = pmccntr_write, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7, .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMCCFILTR_EL0, .type = ARM_CP_ALIAS | ARM_CP_IO, .resetvalue = 0, }, { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7, .writefn = pmccfiltr_write, .raw_writefn = raw_write, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMCCFILTR_EL0, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0), .resetvalue = 0, }, { .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1, .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, .accessfn = pmreg_access, + .fgt = FGT_PMEVTYPERN_EL0, .writefn = pmxevtyper_write, .readfn = pmxevtyper_read }, { .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 1, .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, .accessfn = pmreg_access, + .fgt = FGT_PMEVTYPERN_EL0, .writefn = pmxevtyper_write, .readfn = pmxevtyper_read }, { .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2, .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, .accessfn = pmreg_access_xevcntr, + .fgt = FGT_PMEVCNTRN_EL0, .writefn = pmxevcntr_write, .readfn = pmxevcntr_read }, { .name = "PMXEVCNTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 2, .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, .accessfn = pmreg_access_xevcntr, + .fgt = FGT_PMEVCNTRN_EL0, .writefn = pmxevcntr_write, .readfn = pmxevcntr_read }, { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0, .access = PL0_R | PL1_RW, .accessfn = access_tpm, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .writefn = pmuserenr_write, .raw_writefn = raw_write }, { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1, .access = PL1_RW, .accessfn = access_tpm, + .fgt = FGT_PMINTEN, .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pminten), .resetvalue = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { { .name = "PMINTENSET_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 1, .access = PL1_RW, .accessfn = access_tpm, + .fgt = FGT_PMINTEN, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), .writefn = pmintenset_write, .raw_writefn = raw_write, .resetvalue = 0x0 }, { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2, .access = PL1_RW, .accessfn = access_tpm, + .fgt = FGT_PMINTEN, .type = ARM_CP_ALIAS | ARM_CP_IO | ARM_CP_NO_RAW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), .writefn = pmintenclr_write, }, { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2, .access = PL1_RW, .accessfn = access_tpm, + .fgt = FGT_PMINTEN, .type = ARM_CP_ALIAS | ARM_CP_IO | ARM_CP_NO_RAW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), .writefn = pmintenclr_write }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmovsset_cp_reginfo[] = { /* PMOVSSET is not implemented in v7 before v7ve */ { .name = "PMOVSSET", .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 3, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMOVS, .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsset_write, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmovsset_cp_reginfo[] = { { .name = "PMOVSSET_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 3, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMOVS, .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsset_write, @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) ARMCPRegInfo pmcr = { .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0, .access = PL0_RW, + .fgt = FGT_PMCR_EL0, .type = ARM_CP_IO | ARM_CP_ALIAS, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcr), .accessfn = pmreg_access, .writefn = pmcr_write, @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) .name = "PMCR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 0, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMCR_EL0, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr), .resetvalue = cpu->isar.reset_pmcr_el0, @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) { .name = pmevcntr_name, .cp = 15, .crn = 14, .crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, + .fgt = FGT_PMEVCNTRN_EL0, .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, .accessfn = pmreg_access_xevcntr }, { .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 8 | (3 & (i >> 3)), .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access_xevcntr, .type = ARM_CP_IO, + .fgt = FGT_PMEVCNTRN_EL0, .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, .raw_readfn = pmevcntr_rawread, .raw_writefn = pmevcntr_rawwrite }, { .name = pmevtyper_name, .cp = 15, .crn = 14, .crm = 12 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, + .fgt = FGT_PMEVTYPERN_EL0, .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, .accessfn = pmreg_access }, { .name = pmevtyper_el0_name, .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 12 | (3 & (i >> 3)), .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access, + .fgt = FGT_PMEVTYPERN_EL0, .type = ARM_CP_IO, .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, .raw_writefn = pmevtyper_rawwrite }, @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) { .name = "PMCEID2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .fgt = FGT_PMCEIDN_EL0, .resetvalue = extract64(cpu->pmceid0, 32, 32) }, { .name = "PMCEID3", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .fgt = FGT_PMCEIDN_EL0, .resetvalue = extract64(cpu->pmceid1, 32, 32) }, }; define_arm_cp_regs(cpu, v81_pmu_regs); @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) .name = "PMMIR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 6, .access = PL1_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .fgt = FGT_PMMIR_EL1, .resetvalue = 0 }; define_one_arm_cp_reg(cpu, &v84_pmmir); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "PMCEID0", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .fgt = FGT_PMCEIDN_EL0, .resetvalue = extract64(cpu->pmceid0, 0, 32) }, { .name = "PMCEID0_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 6, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .fgt = FGT_PMCEIDN_EL0, .resetvalue = cpu->pmceid0 }, { .name = "PMCEID1", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 7, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .fgt = FGT_PMCEIDN_EL0, .resetvalue = extract64(cpu->pmceid1, 0, 32) }, { .name = "PMCEID1_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 7, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .fgt = FGT_PMCEIDN_EL0, .resetvalue = cpu->pmceid1 }, }; #ifdef CONFIG_USER_ONLY -- 2.34.1 Mark up the sysreg definitions for the system instructions trapped by HFGITR bits 0..11. These bits cover various cache maintenance operations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-17-peter.maydell@linaro.org Message-id: 20230127175507.2895013-17-peter.maydell@linaro.org --- target/arm/cpregs.h | 14 ++++++++++++++ target/arm/helper.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HDFGWTR, PMCR_EL0), DO_BIT(HDFGRTR, PMMIR_EL1), DO_BIT(HDFGRTR, PMCEIDN_EL0), + + /* Trap bits in HFGITR_EL2, starting from bit 0 */ + DO_BIT(HFGITR, ICIALLUIS), + DO_BIT(HFGITR, ICIALLU), + DO_BIT(HFGITR, ICIVAU), + DO_BIT(HFGITR, DCIVAC), + DO_BIT(HFGITR, DCISW), + DO_BIT(HFGITR, DCCSW), + DO_BIT(HFGITR, DCCISW), + DO_BIT(HFGITR, DCCVAU), + DO_BIT(HFGITR, DCCVAP), + DO_BIT(HFGITR, DCCVADP), + DO_BIT(HFGITR, DCCIVAC), + DO_BIT(HFGITR, DCZVA), } FGTBit; #undef DO_BIT diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { #ifndef CONFIG_USER_ONLY /* Avoid overhead of an access check that always passes in user-mode */ .accessfn = aa64_zva_access, + .fgt = FGT_DCZVA, #endif }, { .name = "CURRENTEL", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, .access = PL1_W, .type = ARM_CP_NOP, + .fgt = FGT_ICIALLUIS, .accessfn = access_ticab }, { .name = "IC_IALLU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, .access = PL1_W, .type = ARM_CP_NOP, + .fgt = FGT_ICIALLU, .accessfn = access_tocu }, { .name = "IC_IVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, + .fgt = FGT_ICIVAU, .accessfn = access_tocu }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .access = PL1_W, .accessfn = aa64_cacheop_poc_access, + .fgt = FGT_DCIVAC, .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, + .fgt = FGT_DCISW, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, + .fgt = FGT_DCCSW, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, + .fgt = FGT_DCCVAU, .accessfn = access_tocu }, { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, + .fgt = FGT_DCCIVAC, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, + .fgt = FGT_DCCISW, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpop_reg[] = { { .name = "DC_CVAP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, + .fgt = FGT_DCCVAP, .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpodp_reg[] = { { .name = "DC_CVADP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, + .fgt = FGT_DCCVADP, .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, }; #endif /*CONFIG_USER_ONLY*/ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { { .name = "DC_IGVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 3, .type = ARM_CP_NOP, .access = PL1_W, + .fgt = FGT_DCIVAC, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_IGSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 4, + .fgt = FGT_DCISW, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DC_IGDVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 5, .type = ARM_CP_NOP, .access = PL1_W, + .fgt = FGT_DCIVAC, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_IGDSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 6, + .fgt = FGT_DCISW, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DC_CGSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 4, + .fgt = FGT_DCCSW, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DC_CGDSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 6, + .fgt = FGT_DCCSW, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DC_CIGSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 4, + .fgt = FGT_DCCISW, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DC_CIGDSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 6, + .fgt = FGT_DCCISW, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { { .name = "DC_CGVAP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 3, .type = ARM_CP_NOP, .access = PL0_W, + .fgt = FGT_DCCVAP, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CGDVAP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 5, .type = ARM_CP_NOP, .access = PL0_W, + .fgt = FGT_DCCVAP, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CGVADP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 3, .type = ARM_CP_NOP, .access = PL0_W, + .fgt = FGT_DCCVADP, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CGDVADP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 5, .type = ARM_CP_NOP, .access = PL0_W, + .fgt = FGT_DCCVADP, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CIGVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 3, .type = ARM_CP_NOP, .access = PL0_W, + .fgt = FGT_DCCIVAC, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CIGDVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 5, .type = ARM_CP_NOP, .access = PL0_W, + .fgt = FGT_DCCIVAC, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_GVA", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 3, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { #ifndef CONFIG_USER_ONLY /* Avoid overhead of an access check that always passes in user-mode */ .accessfn = aa64_zva_access, + .fgt = FGT_DCZVA, #endif }, { .name = "DC_GZVA", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { #ifndef CONFIG_USER_ONLY /* Avoid overhead of an access check that always passes in user-mode */ .accessfn = aa64_zva_access, + .fgt = FGT_DCZVA, #endif }, }; -- 2.34.1 Mark up the sysreg definitions for the system instructions trapped by HFGITR bits 12..17. These bits cover AT address translation instructions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-18-peter.maydell@linaro.org Message-id: 20230127175507.2895013-18-peter.maydell@linaro.org --- target/arm/cpregs.h | 6 ++++++ target/arm/helper.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HFGITR, DCCVADP), DO_BIT(HFGITR, DCCIVAC), DO_BIT(HFGITR, DCZVA), + DO_BIT(HFGITR, ATS1E1R), + DO_BIT(HFGITR, ATS1E1W), + DO_BIT(HFGITR, ATS1E0R), + DO_BIT(HFGITR, ATS1E0W), + DO_BIT(HFGITR, ATS1E1RP), + DO_BIT(HFGITR, ATS1E1WP), } FGTBit; #undef DO_BIT diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 0, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, + .fgt = FGT_ATS1E1R, .writefn = ats_write64 }, { .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, + .fgt = FGT_ATS1E1W, .writefn = ats_write64 }, { .name = "AT_S1E0R", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 2, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, + .fgt = FGT_ATS1E0R, .writefn = ats_write64 }, { .name = "AT_S1E0W", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 3, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, + .fgt = FGT_ATS1E0W, .writefn = ats_write64 }, { .name = "AT_S12E1R", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 4, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ats1e1_reginfo[] = { { .name = "AT_S1E1RP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, + .fgt = FGT_ATS1E1RP, .writefn = ats_write64 }, { .name = "AT_S1E1WP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, + .fgt = FGT_ATS1E1WP, .writefn = ats_write64 }, }; -- 2.34.1 Mark up the sysreg definitions for the system instructions trapped by HFGITR bits 18..47. These bits cover TLBI TLB maintenance instructions. (If we implemented FEAT_XS we would need to trap some of the instructions added by that feature using these bits; but we don't yet, so will need to add the .fgt markup when we do.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-19-peter.maydell@linaro.org Message-id: 20230127175507.2895013-19-peter.maydell@linaro.org --- target/arm/cpregs.h | 30 ++++++++++++++++++++++++++++++ target/arm/helper.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 60 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HFGITR, ATS1E0W), DO_BIT(HFGITR, ATS1E1RP), DO_BIT(HFGITR, ATS1E1WP), + DO_BIT(HFGITR, TLBIVMALLE1OS), + DO_BIT(HFGITR, TLBIVAE1OS), + DO_BIT(HFGITR, TLBIASIDE1OS), + DO_BIT(HFGITR, TLBIVAAE1OS), + DO_BIT(HFGITR, TLBIVALE1OS), + DO_BIT(HFGITR, TLBIVAALE1OS), + DO_BIT(HFGITR, TLBIRVAE1OS), + DO_BIT(HFGITR, TLBIRVAAE1OS), + DO_BIT(HFGITR, TLBIRVALE1OS), + DO_BIT(HFGITR, TLBIRVAALE1OS), + DO_BIT(HFGITR, TLBIVMALLE1IS), + DO_BIT(HFGITR, TLBIVAE1IS), + DO_BIT(HFGITR, TLBIASIDE1IS), + DO_BIT(HFGITR, TLBIVAAE1IS), + DO_BIT(HFGITR, TLBIVALE1IS), + DO_BIT(HFGITR, TLBIVAALE1IS), + DO_BIT(HFGITR, TLBIRVAE1IS), + DO_BIT(HFGITR, TLBIRVAAE1IS), + DO_BIT(HFGITR, TLBIRVALE1IS), + DO_BIT(HFGITR, TLBIRVAALE1IS), + DO_BIT(HFGITR, TLBIRVAE1), + DO_BIT(HFGITR, TLBIRVAAE1), + DO_BIT(HFGITR, TLBIRVALE1), + DO_BIT(HFGITR, TLBIRVAALE1), + DO_BIT(HFGITR, TLBIVMALLE1), + DO_BIT(HFGITR, TLBIVAE1), + DO_BIT(HFGITR, TLBIASIDE1), + DO_BIT(HFGITR, TLBIVAAE1), + DO_BIT(HFGITR, TLBIVALE1), + DO_BIT(HFGITR, TLBIVAALE1), } FGTBit; #undef DO_BIT diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVMALLE1IS, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVAE1IS, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIASIDE1IS, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVAAE1IS, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVALE1IS, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVAALE1IS, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVMALLE1, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVAE1, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIASIDE1, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVAAE1, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVALE1, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVAALE1, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { { .name = "TLBI_RVAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 1, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAE1IS, .writefn = tlbi_aa64_rvae1is_write }, { .name = "TLBI_RVAAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 3, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAAE1IS, .writefn = tlbi_aa64_rvae1is_write }, { .name = "TLBI_RVALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 5, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVALE1IS, .writefn = tlbi_aa64_rvae1is_write }, { .name = "TLBI_RVAALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 7, .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAALE1IS, .writefn = tlbi_aa64_rvae1is_write }, { .name = "TLBI_RVAE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAE1OS, .writefn = tlbi_aa64_rvae1is_write }, { .name = "TLBI_RVAAE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 3, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAAE1OS, .writefn = tlbi_aa64_rvae1is_write }, { .name = "TLBI_RVALE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 5, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVALE1OS, .writefn = tlbi_aa64_rvae1is_write }, { .name = "TLBI_RVAALE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 7, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAALE1OS, .writefn = tlbi_aa64_rvae1is_write }, { .name = "TLBI_RVAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAE1, .writefn = tlbi_aa64_rvae1_write }, { .name = "TLBI_RVAAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 3, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAAE1, .writefn = tlbi_aa64_rvae1_write }, { .name = "TLBI_RVALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 5, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVALE1, .writefn = tlbi_aa64_rvae1_write }, { .name = "TLBI_RVAALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 7, .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIRVAALE1, .writefn = tlbi_aa64_rvae1_write }, { .name = "TLBI_RIPAS2E1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { { .name = "TLBI_VMALLE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 0, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVMALLE1OS, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 1, + .fgt = FGT_TLBIVAE1OS, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ASIDE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 2, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIASIDE1OS, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAAE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 3, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVAAE1OS, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VALE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 5, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVALE1OS, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VAALE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 7, .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, + .fgt = FGT_TLBIVAALE1OS, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ALLE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 0, -- 2.34.1 Mark up the sysreg definitions for the system instructions trapped by HFGITR bits 48..63. Some of these bits are for trapping instructions which are not in the system instruction encoding (i.e. which are not handled by the ARMCPRegInfo mechanism): * ERET, ERETAA, ERETAB * SVC We will have to handle those separately and manually. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-20-peter.maydell@linaro.org Message-id: 20230127175507.2895013-20-peter.maydell@linaro.org --- target/arm/cpregs.h | 4 ++++ target/arm/helper.c | 9 +++++++++ 2 files changed, 13 insertions(+) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum FGTBit { DO_BIT(HFGITR, TLBIVAAE1), DO_BIT(HFGITR, TLBIVALE1), DO_BIT(HFGITR, TLBIVAALE1), + DO_BIT(HFGITR, CFPRCTX), + DO_BIT(HFGITR, DVPRCTX), + DO_BIT(HFGITR, CPPRCTX), + DO_BIT(HFGITR, DCCVAC), } FGTBit; #undef DO_BIT diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, + .fgt = FGT_DCCVAC, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { { .name = "DC_CGVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 3, .type = ARM_CP_NOP, .access = PL0_W, + .fgt = FGT_DCCVAC, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CGDVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 5, .type = ARM_CP_NOP, .access = PL0_W, + .fgt = FGT_DCCVAC, .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CGVAP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 3, @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo predinv_reginfo[] = { { .name = "CFP_RCTX", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 4, + .fgt = FGT_CFPRCTX, .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, { .name = "DVP_RCTX", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 5, + .fgt = FGT_DVPRCTX, .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, { .name = "CPP_RCTX", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 7, + .fgt = FGT_CPPRCTX, .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, /* * Note the AArch32 opcodes have a different OPC1. */ { .name = "CFPRCTX", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 4, + .fgt = FGT_CFPRCTX, .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, { .name = "DVPRCTX", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 5, + .fgt = FGT_DVPRCTX, .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, { .name = "CPPRCTX", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 7, + .fgt = FGT_CPPRCTX, .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, }; -- 2.34.1 Implement the HFGITR_EL2.ERET fine-grained trap. This traps execution from AArch64 EL1 of ERET, ERETAA and ERETAB. The trap is reported with a syndrome value of 0x1a. The trap must take precedence over a possible pointer-authentication trap for ERETAA and ERETAB. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-21-peter.maydell@linaro.org Message-id: 20230127175507.2895013-21-peter.maydell@linaro.org --- target/arm/cpu.h | 1 + target/arm/syndrome.h | 10 ++++++++++ target/arm/translate.h | 2 ++ target/arm/helper.c | 3 +++ target/arm/translate-a64.c | 10 ++++++++++ 5 files changed, 26 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, PSTATE_ZA, 23, 1) FIELD(TBFLAG_A64, SVL, 24, 4) /* Indicates that SME Streaming mode is active, and SMCR_ELx.FA64 is not. */ FIELD(TBFLAG_A64, SME_TRAP_NONSTREAMING, 28, 1) +FIELD(TBFLAG_A64, FGT_ERET, 29, 1) /* * Helpers for using the above. diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_AA64_SMC = 0x17, EC_SYSTEMREGISTERTRAP = 0x18, EC_SVEACCESSTRAP = 0x19, + EC_ERETTRAP = 0x1a, EC_SMETRAP = 0x1d, EC_INSNABORT = 0x20, EC_INSNABORT_SAME_EL = 0x21, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) return EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT; } +/* + * eret_op is bits [1:0] of the ERET instruction, so: + * 0 for ERET, 2 for ERETAA, 3 for ERETAB. + */ +static inline uint32_t syn_erettrap(int eret_op) +{ + return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op; +} + static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) { return (EC_SMETRAP << ARM_EL_EC_SHIFT) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool mve_no_pred; /* True if fine-grained traps are active */ bool fgt_active; + /* True if fine-grained trap on ERET is enabled */ + bool fgt_eret; /* * >= 0, a copy of PSTATE.BTYPE, which will be 0 without v8.5-BTI. * < 0, set by the current instruction. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, if (arm_fgt_active(env, el)) { DP_TBFLAG_ANY(flags, FGT_ACTIVE, 1); + if (FIELD_EX64(env->cp15.fgt_exec[FGTREG_HFGITR], HFGITR_EL2, ERET)) { + DP_TBFLAG_A64(flags, FGT_ERET, 1); + } } if (cpu_isar_feature(aa64_mte, env_archcpu(env))) { diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) if (op4 != 0) { goto do_unallocated; } + if (s->fgt_eret) { + gen_exception_insn_el(s, 0, EXCP_UDEF, syn_erettrap(op3), 2); + return; + } dst = tcg_temp_new_i64(); tcg_gen_ld_i64(dst, cpu_env, offsetof(CPUARMState, elr_el[s->current_el])); @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) if (rn != 0x1f || op4 != 0x1f) { goto do_unallocated; } + /* The FGT trap takes precedence over an auth trap. */ + if (s->fgt_eret) { + gen_exception_insn_el(s, 0, EXCP_UDEF, syn_erettrap(op3), 2); + return; + } dst = tcg_temp_new_i64(); tcg_gen_ld_i64(dst, cpu_env, offsetof(CPUARMState, elr_el[s->current_el])); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL); dc->fgt_active = EX_TBFLAG_ANY(tb_flags, FGT_ACTIVE); + dc->fgt_eret = EX_TBFLAG_A64(tb_flags, FGT_ERET); dc->sve_excp_el = EX_TBFLAG_A64(tb_flags, SVEEXC_EL); dc->sme_excp_el = EX_TBFLAG_A64(tb_flags, SMEEXC_EL); dc->vl = (EX_TBFLAG_A64(tb_flags, VL) + 1) * 16; -- 2.34.1 Implement the HFGITR_EL2.SVC_EL0 and SVC_EL1 fine-grained traps. These trap execution of the SVC instruction from AArch32 and AArch64. (As usual, AArch32 can only trap from EL0, as fine grained traps are disabled with an AArch32 EL1.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-22-peter.maydell@linaro.org Message-id: 20230127175507.2895013-22-peter.maydell@linaro.org --- target/arm/cpu.h | 1 + target/arm/translate.h | 2 ++ target/arm/helper.c | 20 ++++++++++++++++++++ target/arm/translate-a64.c | 9 ++++++++- target/arm/translate.c | 12 +++++++++--- 5 files changed, 40 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2) FIELD(TBFLAG_ANY, ALIGN_MEM, 10, 1) FIELD(TBFLAG_ANY, PSTATE__IL, 11, 1) FIELD(TBFLAG_ANY, FGT_ACTIVE, 12, 1) +FIELD(TBFLAG_ANY, FGT_SVC, 13, 1) /* * Bit usage when in AArch32 state, both A- and M-profile. diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool fgt_active; /* True if fine-grained trap on ERET is enabled */ bool fgt_eret; + /* True if fine-grained trap on SVC is enabled */ + bool fgt_svc; /* * >= 0, a copy of PSTATE.BTYPE, which will be 0 without v8.5-BTI. * < 0, set by the current instruction. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_mmu_idx(CPUARMState *env) return arm_mmu_idx_el(env, arm_current_el(env)); } +static inline bool fgt_svc(CPUARMState *env, int el) +{ + /* + * Assuming fine-grained-traps are active, return true if we + * should be trapping on SVC instructions. Only AArch64 can + * trap on an SVC at EL1, but we don't need to special-case this + * because if this is AArch32 EL1 then arm_fgt_active() is false. + * We also know el is 0 or 1. + */ + return el == 0 ? + FIELD_EX64(env->cp15.fgt_exec[FGTREG_HFGITR], HFGITR_EL2, SVC_EL0) : + FIELD_EX64(env->cp15.fgt_exec[FGTREG_HFGITR], HFGITR_EL2, SVC_EL1); +} + static CPUARMTBFlags rebuild_hflags_common(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx, CPUARMTBFlags flags) @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, if (arm_fgt_active(env, el)) { DP_TBFLAG_ANY(flags, FGT_ACTIVE, 1); + if (fgt_svc(env, el)) { + DP_TBFLAG_ANY(flags, FGT_SVC, 1); + } } if (env->uncached_cpsr & CPSR_IL) { @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, if (FIELD_EX64(env->cp15.fgt_exec[FGTREG_HFGITR], HFGITR_EL2, ERET)) { DP_TBFLAG_A64(flags, FGT_ERET, 1); } + if (fgt_svc(env, el)) { + DP_TBFLAG_ANY(flags, FGT_SVC, 1); + } } if (cpu_isar_feature(aa64_mte, env_archcpu(env))) { diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) int opc = extract32(insn, 21, 3); int op2_ll = extract32(insn, 0, 5); int imm16 = extract32(insn, 5, 16); + uint32_t syndrome; switch (opc) { case 0: @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) */ switch (op2_ll) { case 1: /* SVC */ + syndrome = syn_aa64_svc(imm16); + if (s->fgt_svc) { + gen_exception_insn_el(s, 0, EXCP_UDEF, syndrome, 2); + break; + } gen_ss_advance(s); - gen_exception_insn(s, 4, EXCP_SWI, syn_aa64_svc(imm16)); + gen_exception_insn(s, 4, EXCP_SWI, syndrome); break; case 2: /* HVC */ if (s->current_el == 0) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL); dc->fgt_active = EX_TBFLAG_ANY(tb_flags, FGT_ACTIVE); + dc->fgt_svc = EX_TBFLAG_ANY(tb_flags, FGT_SVC); dc->fgt_eret = EX_TBFLAG_A64(tb_flags, FGT_ERET); dc->sve_excp_el = EX_TBFLAG_A64(tb_flags, SVEEXC_EL); dc->sme_excp_el = EX_TBFLAG_A64(tb_flags, SMEEXC_EL); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_SVC(DisasContext *s, arg_SVC *a) (a->imm == semihost_imm)) { gen_exception_internal_insn(s, EXCP_SEMIHOST); } else { - gen_update_pc(s, curr_insn_len(s)); - s->svc_imm = a->imm; - s->base.is_jmp = DISAS_SWI; + if (s->fgt_svc) { + uint32_t syndrome = syn_aa32_svc(a->imm, s->thumb); + gen_exception_insn_el(s, 0, EXCP_UDEF, syndrome, 2); + } else { + gen_update_pc(s, curr_insn_len(s)); + s->svc_imm = a->imm; + s->base.is_jmp = DISAS_SWI; + } } return true; } @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL); dc->fgt_active = EX_TBFLAG_ANY(tb_flags, FGT_ACTIVE); + dc->fgt_svc = EX_TBFLAG_ANY(tb_flags, FGT_SVC); if (arm_feature(env, ARM_FEATURE_M)) { dc->vfp_enabled = 1; -- 2.34.1 FEAT_FGT also implements an extra trap bit in the MDCR_EL2 and MDCR_EL3 registers: bit TDCC enables trapping of use of the Debug Comms Channel registers OSDTRRX_EL1, OSDTRTX_EL1, MDCCSR_EL0, MDCCINT_EL0, DBGDTR_EL0, DBGDTRRX_EL0 and DBGDTRTX_EL0 (and their AArch32 equivalents). This trapping is independent of whether fine-grained traps are enabled or not. Implement these extra traps. (We don't implement DBGDTR_EL0, DBGDTRRX_EL0 and DBGDTRTX_EL0.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-23-peter.maydell@linaro.org Message-id: 20230127175507.2895013-23-peter.maydell@linaro.org --- target/arm/debug_helper.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* + * Check for traps to Debug Comms Channel registers. If FEAT_FGT + * is implemented then these are controlled by MDCR_EL2.TDCC for + * EL2 and MDCR_EL3.TDCC for EL3. They are also controlled by + * the general debug access trap bits MDCR_EL2.TDA and MDCR_EL3.TDA. + */ +static CPAccessResult access_tdcc(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + int el = arm_current_el(env); + uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); + bool mdcr_el2_tda = (mdcr_el2 & MDCR_TDA) || (mdcr_el2 & MDCR_TDE) || + (arm_hcr_el2_eff(env) & HCR_TGE); + bool mdcr_el2_tdcc = cpu_isar_feature(aa64_fgt, env_archcpu(env)) && + (mdcr_el2 & MDCR_TDCC); + bool mdcr_el3_tdcc = cpu_isar_feature(aa64_fgt, env_archcpu(env)) && + (env->cp15.mdcr_el3 & MDCR_TDCC); + + if (el < 2 && (mdcr_el2_tda || mdcr_el2_tdcc)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 && ((env->cp15.mdcr_el3 & MDCR_TDA) || mdcr_el3_tdcc)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + static void oslar_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { */ { .name = "MDCCSR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 1, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, + .access = PL0_R, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, /* * OSDTRRX_EL1/OSDTRTX_EL1 are used for save and restore of DBGDTRRX_EL0. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { */ { .name = "OSDTRRX_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 2, - .access = PL1_RW, .accessfn = access_tda, + .access = PL1_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "OSDTRTX_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2, - .access = PL1_RW, .accessfn = access_tda, + .access = PL1_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { */ { .name = "MDCCINT_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0, - .access = PL1_RW, .accessfn = access_tda, + .access = PL1_RW, .accessfn = access_tdcc, .type = ARM_CP_NOP }, /* * Dummy DBGCLAIM registers. -- 2.34.1 Update the ID registers for TCG's '-cpu max' to report the presence of FEAT_FGT Fine-Grained Traps support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Fuad Tabba <tabba@google.com> Message-id: 20230130182459.3309057-24-peter.maydell@linaro.org Message-id: 20230127175507.2895013-24-peter.maydell@linaro.org --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_ETS (Enhanced Translation Synchronization) - FEAT_EVT (Enhanced Virtualization Traps) - FEAT_FCMA (Floating-point complex number instructions) +- FEAT_FGT (Fine-Grained Traps) - FEAT_FHM (Floating-point half-precision multiplication instructions) - FEAT_FP16 (Half-precision floating-point data processing) - FEAT_FRINTTS (Floating-point to integer instructions) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR0, TGRAN16_2, 2); /* 16k stage2 supported */ t = FIELD_DP64(t, ID_AA64MMFR0, TGRAN64_2, 2); /* 64k stage2 supported */ t = FIELD_DP64(t, ID_AA64MMFR0, TGRAN4_2, 2); /* 4k stage2 supported */ + t = FIELD_DP64(t, ID_AA64MMFR0, FGT, 1); /* FEAT_FGT */ cpu->isar.id_aa64mmfr0 = t; t = cpu->isar.id_aa64mmfr1; -- 2.34.1