The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 arm queue: big stuff here is my MVE codegen optimisation, and Alex's Apple Silicon hvf support. -- PMM The following changes since commit 7adb961995a3744f51396502b33ad04a56a317c3: Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210916' into staging (2021-09-19 18:53:29 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210920 for you to fetch changes up to 1dc5a60bfe406bc1122d68cbdefda38d23134b27: target/arm: Optimize MVE 1op-immediate insns (2021-09-20 14:18:01 +0100) ---------------------------------------------------------------- target-arm queue: * Optimize codegen for MVE when predication not active * hvf: Add Apple Silicon support * hw/intc: Set GIC maintenance interrupt level to only 0 or 1 * Fix mishandling of MVE FPSCR.LTPSIZE reset for usermode emulator * elf2dmp: Fix coverity nits ---------------------------------------------------------------- Alexander Graf (7): arm: Move PMC register definitions to internals.h hvf: Add execute to dirty log permission bitmap hvf: Introduce hvf_arch_init() callback hvf: Add Apple Silicon support hvf: arm: Implement PSCI handling arm: Add Hypervisor.framework build target hvf: arm: Add rudimentary PMC support Peter Collingbourne (1): arm/hvf: Add a WFI handler Peter Maydell (18): elf2dmp: Check curl_easy_setopt() return value elf2dmp: Fail cleanly if PDB file specifies zero block_size target/arm: Don't skip M-profile reset entirely in user mode target/arm: Always clear exclusive monitor on reset target/arm: Consolidate ifdef blocks in reset hvf: arm: Implement -cpu host target/arm: Avoid goto_tb if we're trying to exit to the main loop target/arm: Enforce that FPDSCR.LTPSIZE is 4 on inbound migration target/arm: Add TB flag for "MVE insns not predicated" target/arm: Optimize MVE logic ops target/arm: Optimize MVE arithmetic ops target/arm: Optimize MVE VNEG, VABS target/arm: Optimize MVE VDUP target/arm: Optimize MVE VMVN target/arm: Optimize MVE VSHL, VSHR immediate forms target/arm: Optimize MVE VSHLL and VMOVL target/arm: Optimize MVE VSLI and VSRI target/arm: Optimize MVE 1op-immediate insns Shashi Mallela (1): hw/intc: Set GIC maintenance interrupt level to only 0 or 1 meson.build | 8 + include/sysemu/hvf_int.h | 12 +- target/arm/cpu.h | 6 +- target/arm/hvf_arm.h | 18 + target/arm/internals.h | 44 ++ target/arm/kvm_arm.h | 2 - target/arm/translate.h | 2 + accel/hvf/hvf-accel-ops.c | 21 +- contrib/elf2dmp/download.c | 22 +- contrib/elf2dmp/pdb.c | 4 + hw/intc/arm_gicv3_cpuif.c | 5 +- target/arm/cpu.c | 56 +- target/arm/helper.c | 77 ++- target/arm/hvf/hvf.c | 1278 +++++++++++++++++++++++++++++++++++++++++ target/arm/machine.c | 13 + target/arm/translate-m-nocp.c | 8 +- target/arm/translate-mve.c | 310 +++++++--- target/arm/translate-vfp.c | 33 +- target/arm/translate.c | 42 +- target/i386/hvf/hvf.c | 10 + MAINTAINERS | 5 + target/arm/hvf/meson.build | 3 + target/arm/hvf/trace-events | 11 + target/arm/meson.build | 2 + 24 files changed, 1824 insertions(+), 168 deletions(-) create mode 100644 target/arm/hvf_arm.h create mode 100644 target/arm/hvf/hvf.c create mode 100644 target/arm/hvf/meson.build create mode 100644 target/arm/hvf/trace-events Coverity points out that we aren't checking the return value from curl_easy_setopt(). Fixes: Coverity CID 1458895 Inspired-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Message-id: 20210910170656.366592-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/download.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/contrib/elf2dmp/download.c b/contrib/elf2dmp/download.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/download.c +++ b/contrib/elf2dmp/download.c @@ -XXX,XX +XXX,XX @@ int download_url(const char *name, const char *url) goto out_curl; } - curl_easy_setopt(curl, CURLOPT_URL, url); - curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, NULL); - curl_easy_setopt(curl, CURLOPT_WRITEDATA, file); - curl_easy_setopt(curl, CURLOPT_FOLLOWLOCATION, 1); - curl_easy_setopt(curl, CURLOPT_NOPROGRESS, 0); - - if (curl_easy_perform(curl) != CURLE_OK) { - err = 1; - fclose(file); + if (curl_easy_setopt(curl, CURLOPT_URL, url) != CURLE_OK + || curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, NULL) != CURLE_OK + || curl_easy_setopt(curl, CURLOPT_WRITEDATA, file) != CURLE_OK + || curl_easy_setopt(curl, CURLOPT_FOLLOWLOCATION, 1) != CURLE_OK + || curl_easy_setopt(curl, CURLOPT_NOPROGRESS, 0) != CURLE_OK + || curl_easy_perform(curl) != CURLE_OK) { unlink(name); - goto out_curl; + fclose(file); + err = 1; + } else { + err = fclose(file); } - err = fclose(file); - out_curl: curl_easy_cleanup(curl); -- 2.20.1 Coverity points out that if the PDB file we're trying to read has a header specifying a block_size of zero then we will end up trying to divide by zero in pdb_ds_read_file(). Check for this and fail cleanly instead. Fixes: Coverity CID 1458869 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Message-id: 20210910170656.366592-3-philmd@redhat.com Message-Id: <20210901143910.17112-3-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> --- contrib/elf2dmp/pdb.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/contrib/elf2dmp/pdb.c b/contrib/elf2dmp/pdb.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/pdb.c +++ b/contrib/elf2dmp/pdb.c @@ -XXX,XX +XXX,XX @@ out_symbols: static int pdb_reader_ds_init(struct pdb_reader *r, PDB_DS_HEADER *hdr) { + if (hdr->block_size == 0) { + return 1; + } + memset(r->file_used, 0, sizeof(r->file_used)); r->ds.header = hdr; r->ds.toc = pdb_ds_read(hdr, (uint32_t *)((uint8_t *)hdr + -- 2.20.1 Currently all of the M-profile specific code in arm_cpu_reset() is inside a !defined(CONFIG_USER_ONLY) ifdef block. This is unintentional: it happened because originally the only M-profile-specific handling was the setup of the initial SP and PC from the vector table, which is system-emulation only. But then we added a lot of other M-profile setup to the same "if (ARM_FEATURE_M)" code block without noticing that it was all inside a not-user-mode ifdef. This has generally been harmless, but with the addition of v8.1M low-overhead-loop support we ran into a problem: the reset of FPSCR.LTPSIZE to 4 was only being done for system emulation mode, so if a user-mode guest tried to execute the LE instruction it would incorrectly take a UsageFault. Adjust the ifdefs so only the really system-emulation specific parts are covered. Because this means we now run some reset code that sets up initial values in the FPCCR and similar FPU related registers, explicitly set up the registers controlling FPU context handling in user-emulation mode so that the FPU works by design and not by chance. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/613 Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210914120725.24992-2-peter.maydell@linaro.org --- target/arm/cpu.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->uncached_cpsr = ARM_CPU_MODE_SVC; } env->daif = PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F; +#endif if (arm_feature(env, ARM_FEATURE_M)) { +#ifndef CONFIG_USER_ONLY uint32_t initial_msp; /* Loaded from 0x0 */ uint32_t initial_pc; /* Loaded from 0x4 */ uint8_t *rom; uint32_t vecbase; +#endif if (cpu_isar_feature(aa32_lob, cpu)) { /* @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; } + +#ifndef CONFIG_USER_ONLY /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->regs[13] = initial_msp & 0xFFFFFFFC; env->regs[15] = initial_pc & ~1; env->thumb = initial_pc & 1; +#else + /* + * For user mode we run non-secure and with access to the FPU. + * The FPU context is active (ie does not need further setup) + * and is owned by non-secure. + */ + env->v7m.secure = false; + env->v7m.nsacr = 0xcff; + env->v7m.cpacr[M_REG_NS] = 0xf0ffff; + env->v7m.fpccr[M_REG_S] &= + ~(R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK); + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +#endif } +#ifndef CONFIG_USER_ONLY /* AArch32 has a hard highvec setting of 0xFFFF0000. If we are currently * executing as AArch32 then check if highvecs are enabled and * adjust the PC accordingly. -- 2.20.1 There's no particular reason why the exclusive monitor should be only cleared on reset in system emulation mode. It doesn't hurt if it isn't cleared in user mode, but we might as well reduce the amount of code we have that's inside an ifdef. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210914120725.24992-3-peter.maydell@linaro.org --- target/arm/cpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->regs[15] = 0xFFFF0000; } + env->vfp.xregs[ARM_VFP_FPEXC] = 0; +#endif + /* M profile requires that reset clears the exclusive monitor; * A profile does not, but clearing it makes more sense than having it * set with an exclusive access on address zero. */ arm_clear_exclusive(env); - env->vfp.xregs[ARM_VFP_FPEXC] = 0; -#endif - if (arm_feature(env, ARM_FEATURE_PMSA)) { if (cpu->pmsav7_dregion > 0) { if (arm_feature(env, ARM_FEATURE_V8)) { -- 2.20.1 Move an ifndef CONFIG_USER_ONLY code block up in arm_cpu_reset() so it can be merged with another earlier one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210914120725.24992-4-peter.maydell@linaro.org --- target/arm/cpu.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->uncached_cpsr = ARM_CPU_MODE_SVC; } env->daif = PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F; + + /* AArch32 has a hard highvec setting of 0xFFFF0000. If we are currently + * executing as AArch32 then check if highvecs are enabled and + * adjust the PC accordingly. + */ + if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) { + env->regs[15] = 0xFFFF0000; + } + + env->vfp.xregs[ARM_VFP_FPEXC] = 0; #endif if (arm_feature(env, ARM_FEATURE_M)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) #endif } -#ifndef CONFIG_USER_ONLY - /* AArch32 has a hard highvec setting of 0xFFFF0000. If we are currently - * executing as AArch32 then check if highvecs are enabled and - * adjust the PC accordingly. - */ - if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) { - env->regs[15] = 0xFFFF0000; - } - - env->vfp.xregs[ARM_VFP_FPEXC] = 0; -#endif - /* M profile requires that reset clears the exclusive monitor; * A profile does not, but clearing it makes more sense than having it * set with an exclusive access on address zero. -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> During sbsa acs level 3 testing, it is seen that the GIC maintenance interrupts are not triggered and the related test cases fail. This is because we were incorrectly passing the value of the MISR register (from maintenance_interrupt_state()) to qemu_set_irq() as the level argument, whereas the device on the other end of this irq line expects a 0/1 value. Fix the logic to pass a 0/1 level indication, rather than a 0/not-0 value. Fixes: c5fc89b36c0 ("hw/intc/arm_gicv3: Implement gicv3_cpuif_virt_update()") Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210915205809.59068-1-shashi.mallela@linaro.org [PMM: tweaked commit message; collapsed nested if()s into one] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void gicv3_cpuif_virt_update(GICv3CPUState *cs) } } - if (cs->ich_hcr_el2 & ICH_HCR_EL2_EN) { - maintlevel = maintenance_interrupt_state(cs); + if ((cs->ich_hcr_el2 & ICH_HCR_EL2_EN) && + maintenance_interrupt_state(cs) != 0) { + maintlevel = 1; } trace_gicv3_cpuif_virt_set_irqs(gicv3_redist_affid(cs), fiqlevel, -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> We will need PMC register definitions in accel specific code later. Move all constant definitions to common arm headers so we can reuse them. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-2-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 44 ++++++++++++++++++++++++++++++++++++++++++ target/arm/helper.c | 44 ------------------------------------------ 2 files changed, 44 insertions(+), 44 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ enum MVEECIState { /* All other values reserved */ }; +/* Definitions for the PMU registers */ +#define PMCRN_MASK 0xf800 +#define PMCRN_SHIFT 11 +#define PMCRLC 0x40 +#define PMCRDP 0x20 +#define PMCRX 0x10 +#define PMCRD 0x8 +#define PMCRC 0x4 +#define PMCRP 0x2 +#define PMCRE 0x1 +/* + * Mask of PMCR bits writeable by guest (not including WO bits like C, P, + * which can be written as 1 to trigger behaviour but which stay RAZ). + */ +#define PMCR_WRITEABLE_MASK (PMCRLC | PMCRDP | PMCRX | PMCRD | PMCRE) + +#define PMXEVTYPER_P 0x80000000 +#define PMXEVTYPER_U 0x40000000 +#define PMXEVTYPER_NSK 0x20000000 +#define PMXEVTYPER_NSU 0x10000000 +#define PMXEVTYPER_NSH 0x08000000 +#define PMXEVTYPER_M 0x04000000 +#define PMXEVTYPER_MT 0x02000000 +#define PMXEVTYPER_EVTCOUNT 0x0000ffff +#define PMXEVTYPER_MASK (PMXEVTYPER_P | PMXEVTYPER_U | PMXEVTYPER_NSK | \ + PMXEVTYPER_NSU | PMXEVTYPER_NSH | \ + PMXEVTYPER_M | PMXEVTYPER_MT | \ + PMXEVTYPER_EVTCOUNT) + +#define PMCCFILTR 0xf8000000 +#define PMCCFILTR_M PMXEVTYPER_M +#define PMCCFILTR_EL0 (PMCCFILTR | PMCCFILTR_M) + +static inline uint32_t pmu_num_counters(CPUARMState *env) +{ + return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT; +} + +/* Bits allowed to be set/cleared for PMCNTEN* and PMINTEN* */ +static inline uint64_t pmu_counter_mask(CPUARMState *env) +{ + return (1 << 31) | ((1 << pmu_num_counters(env)) - 1); +} + #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { REGINFO_SENTINEL }; -/* Definitions for the PMU registers */ -#define PMCRN_MASK 0xf800 -#define PMCRN_SHIFT 11 -#define PMCRLC 0x40 -#define PMCRDP 0x20 -#define PMCRX 0x10 -#define PMCRD 0x8 -#define PMCRC 0x4 -#define PMCRP 0x2 -#define PMCRE 0x1 -/* - * Mask of PMCR bits writeable by guest (not including WO bits like C, P, - * which can be written as 1 to trigger behaviour but which stay RAZ). - */ -#define PMCR_WRITEABLE_MASK (PMCRLC | PMCRDP | PMCRX | PMCRD | PMCRE) - -#define PMXEVTYPER_P 0x80000000 -#define PMXEVTYPER_U 0x40000000 -#define PMXEVTYPER_NSK 0x20000000 -#define PMXEVTYPER_NSU 0x10000000 -#define PMXEVTYPER_NSH 0x08000000 -#define PMXEVTYPER_M 0x04000000 -#define PMXEVTYPER_MT 0x02000000 -#define PMXEVTYPER_EVTCOUNT 0x0000ffff -#define PMXEVTYPER_MASK (PMXEVTYPER_P | PMXEVTYPER_U | PMXEVTYPER_NSK | \ - PMXEVTYPER_NSU | PMXEVTYPER_NSH | \ - PMXEVTYPER_M | PMXEVTYPER_MT | \ - PMXEVTYPER_EVTCOUNT) - -#define PMCCFILTR 0xf8000000 -#define PMCCFILTR_M PMXEVTYPER_M -#define PMCCFILTR_EL0 (PMCCFILTR | PMCCFILTR_M) - -static inline uint32_t pmu_num_counters(CPUARMState *env) -{ - return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT; -} - -/* Bits allowed to be set/cleared for PMCNTEN* and PMINTEN* */ -static inline uint64_t pmu_counter_mask(CPUARMState *env) -{ - return (1 << 31) | ((1 << pmu_num_counters(env)) - 1); -} - typedef struct pm_event { uint16_t number; /* PMEVTYPER.evtCount is 16 bits wide */ /* If the event is supported on this CPU (used to generate PMCEID[01]) */ -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> Hvf's permission bitmap during and after dirty logging does not include the HV_MEMORY_EXEC permission. At least on Apple Silicon, this leads to instruction faults once dirty logging was enabled. Add the bit to make it work properly. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-3-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- accel/hvf/hvf-accel-ops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static void hvf_set_dirty_tracking(MemoryRegionSection *section, bool on) if (on) { slot->flags |= HVF_SLOT_LOG; hv_vm_protect((uintptr_t)slot->start, (size_t)slot->size, - HV_MEMORY_READ); + HV_MEMORY_READ | HV_MEMORY_EXEC); /* stop tracking region*/ } else { slot->flags &= ~HVF_SLOT_LOG; hv_vm_protect((uintptr_t)slot->start, (size_t)slot->size, - HV_MEMORY_READ | HV_MEMORY_WRITE); + HV_MEMORY_READ | HV_MEMORY_WRITE | HV_MEMORY_EXEC); } } -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> We will need to install a migration helper for the ARM hvf backend. Let's introduce an arch callback for the overall hvf init chain to do so. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-4-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/hvf_int.h | 1 + accel/hvf/hvf-accel-ops.c | 3 ++- target/i386/hvf/hvf.c | 5 +++++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ struct hvf_vcpu_state { }; void assert_hvf_ok(hv_return_t ret); +int hvf_arch_init(void); int hvf_arch_init_vcpu(CPUState *cpu); void hvf_arch_vcpu_destroy(CPUState *cpu); int hvf_vcpu_exec(CPUState *); diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static int hvf_accel_init(MachineState *ms) hvf_state = s; memory_listener_register(&hvf_memory_listener, &address_space_memory); - return 0; + + return hvf_arch_init(); } static void hvf_accel_class_init(ObjectClass *oc, void *data) diff --git a/target/i386/hvf/hvf.c b/target/i386/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf.c +++ b/target/i386/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static inline bool apic_bus_freq_is_known(CPUX86State *env) return env->apic_bus_freq != 0; } +int hvf_arch_init(void) +{ + return 0; +} + int hvf_arch_init_vcpu(CPUState *cpu) { X86CPU *x86cpu = X86_CPU(cpu); -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> With Apple Silicon available to the masses, it's a good time to add support for driving its virtualization extensions from QEMU. This patch adds all necessary architecture specific code to get basic VMs working, including save/restore. Known limitations: - WFI handling is missing (follows in later patch) - No watchpoint/breakpoint support Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-5-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/sysemu/hvf_int.h | 10 +- accel/hvf/hvf-accel-ops.c | 9 + target/arm/hvf/hvf.c | 794 ++++++++++++++++++++++++++++++++++++ target/i386/hvf/hvf.c | 5 + MAINTAINERS | 5 + target/arm/hvf/trace-events | 10 + 7 files changed, 833 insertions(+), 1 deletion(-) create mode 100644 target/arm/hvf/hvf.c create mode 100644 target/arm/hvf/trace-events diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ if have_system or have_user 'accel/tcg', 'hw/core', 'target/arm', + 'target/arm/hvf', 'target/hppa', 'target/i386', 'target/i386/kvm', diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ #ifndef HVF_INT_H #define HVF_INT_H +#ifdef __aarch64__ +#include <Hypervisor/Hypervisor.h> +#else #include <Hypervisor/hv.h> +#endif /* hvf_slot flags */ #define HVF_SLOT_LOG (1 << 0) @@ -XXX,XX +XXX,XX @@ struct HVFState { int num_slots; hvf_vcpu_caps *hvf_caps; + uint64_t vtimer_offset; }; extern HVFState *hvf_state; struct hvf_vcpu_state { - int fd; + uint64_t fd; + void *exit; + bool vtimer_masked; }; void assert_hvf_ok(hv_return_t ret); @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *); hvf_slot *hvf_find_overlap_slot(uint64_t, uint64_t); int hvf_put_registers(CPUState *); int hvf_get_registers(CPUState *); +void hvf_kick_vcpu_thread(CPUState *cpu); #endif diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ HVFState *hvf_state; +#ifdef __aarch64__ +#define HV_VM_DEFAULT NULL +#endif + /* Memory slots */ hvf_slot *hvf_find_overlap_slot(uint64_t start, uint64_t size) @@ -XXX,XX +XXX,XX @@ static int hvf_init_vcpu(CPUState *cpu) pthread_sigmask(SIG_BLOCK, NULL, &set); sigdelset(&set, SIG_IPI); +#ifdef __aarch64__ + r = hv_vcpu_create(&cpu->hvf->fd, (hv_vcpu_exit_t **)&cpu->hvf->exit, NULL); +#else r = hv_vcpu_create((hv_vcpuid_t *)&cpu->hvf->fd, HV_VCPU_DEFAULT); +#endif cpu->vcpu_dirty = 1; assert_hvf_ok(r); @@ -XXX,XX +XXX,XX @@ static void hvf_accel_ops_class_init(ObjectClass *oc, void *data) AccelOpsClass *ops = ACCEL_OPS_CLASS(oc); ops->create_vcpu_thread = hvf_start_vcpu_thread; + ops->kick_vcpu_thread = hvf_kick_vcpu_thread; ops->synchronize_post_reset = hvf_cpu_synchronize_post_reset; ops->synchronize_post_init = hvf_cpu_synchronize_post_init; diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU Hypervisor.framework support for Apple Silicon + + * Copyright 2020 Alexander Graf <agraf@csgraf.de> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "qemu/error-report.h" + +#include "sysemu/runstate.h" +#include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" +#include "sysemu/hw_accel.h" + +#include <mach/mach_time.h> + +#include "exec/address-spaces.h" +#include "hw/irq.h" +#include "qemu/main-loop.h" +#include "sysemu/cpus.h" +#include "target/arm/cpu.h" +#include "target/arm/internals.h" +#include "trace/trace-target_arm_hvf.h" +#include "migration/vmstate.h" + +#define HVF_SYSREG(crn, crm, op0, op1, op2) \ + ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2) +#define PL1_WRITE_MASK 0x4 + +#define SYSREG(op0, op1, crn, crm, op2) \ + ((op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (crm << 1)) +#define SYSREG_MASK SYSREG(0x3, 0x7, 0xf, 0xf, 0x7) +#define SYSREG_OSLAR_EL1 SYSREG(2, 0, 1, 0, 4) +#define SYSREG_OSLSR_EL1 SYSREG(2, 0, 1, 1, 4) +#define SYSREG_OSDLR_EL1 SYSREG(2, 0, 1, 3, 4) +#define SYSREG_CNTPCT_EL0 SYSREG(3, 3, 14, 0, 1) + +#define WFX_IS_WFE (1 << 0) + +#define TMR_CTL_ENABLE (1 << 0) +#define TMR_CTL_IMASK (1 << 1) +#define TMR_CTL_ISTATUS (1 << 2) + +typedef struct HVFVTimer { + /* Vtimer value during migration and paused state */ + uint64_t vtimer_val; +} HVFVTimer; + +static HVFVTimer vtimer; + +struct hvf_reg_match { + int reg; + uint64_t offset; +}; + +static const struct hvf_reg_match hvf_reg_match[] = { + { HV_REG_X0, offsetof(CPUARMState, xregs[0]) }, + { HV_REG_X1, offsetof(CPUARMState, xregs[1]) }, + { HV_REG_X2, offsetof(CPUARMState, xregs[2]) }, + { HV_REG_X3, offsetof(CPUARMState, xregs[3]) }, + { HV_REG_X4, offsetof(CPUARMState, xregs[4]) }, + { HV_REG_X5, offsetof(CPUARMState, xregs[5]) }, + { HV_REG_X6, offsetof(CPUARMState, xregs[6]) }, + { HV_REG_X7, offsetof(CPUARMState, xregs[7]) }, + { HV_REG_X8, offsetof(CPUARMState, xregs[8]) }, + { HV_REG_X9, offsetof(CPUARMState, xregs[9]) }, + { HV_REG_X10, offsetof(CPUARMState, xregs[10]) }, + { HV_REG_X11, offsetof(CPUARMState, xregs[11]) }, + { HV_REG_X12, offsetof(CPUARMState, xregs[12]) }, + { HV_REG_X13, offsetof(CPUARMState, xregs[13]) }, + { HV_REG_X14, offsetof(CPUARMState, xregs[14]) }, + { HV_REG_X15, offsetof(CPUARMState, xregs[15]) }, + { HV_REG_X16, offsetof(CPUARMState, xregs[16]) }, + { HV_REG_X17, offsetof(CPUARMState, xregs[17]) }, + { HV_REG_X18, offsetof(CPUARMState, xregs[18]) }, + { HV_REG_X19, offsetof(CPUARMState, xregs[19]) }, + { HV_REG_X20, offsetof(CPUARMState, xregs[20]) }, + { HV_REG_X21, offsetof(CPUARMState, xregs[21]) }, + { HV_REG_X22, offsetof(CPUARMState, xregs[22]) }, + { HV_REG_X23, offsetof(CPUARMState, xregs[23]) }, + { HV_REG_X24, offsetof(CPUARMState, xregs[24]) }, + { HV_REG_X25, offsetof(CPUARMState, xregs[25]) }, + { HV_REG_X26, offsetof(CPUARMState, xregs[26]) }, + { HV_REG_X27, offsetof(CPUARMState, xregs[27]) }, + { HV_REG_X28, offsetof(CPUARMState, xregs[28]) }, + { HV_REG_X29, offsetof(CPUARMState, xregs[29]) }, + { HV_REG_X30, offsetof(CPUARMState, xregs[30]) }, + { HV_REG_PC, offsetof(CPUARMState, pc) }, +}; + +static const struct hvf_reg_match hvf_fpreg_match[] = { + { HV_SIMD_FP_REG_Q0, offsetof(CPUARMState, vfp.zregs[0]) }, + { HV_SIMD_FP_REG_Q1, offsetof(CPUARMState, vfp.zregs[1]) }, + { HV_SIMD_FP_REG_Q2, offsetof(CPUARMState, vfp.zregs[2]) }, + { HV_SIMD_FP_REG_Q3, offsetof(CPUARMState, vfp.zregs[3]) }, + { HV_SIMD_FP_REG_Q4, offsetof(CPUARMState, vfp.zregs[4]) }, + { HV_SIMD_FP_REG_Q5, offsetof(CPUARMState, vfp.zregs[5]) }, + { HV_SIMD_FP_REG_Q6, offsetof(CPUARMState, vfp.zregs[6]) }, + { HV_SIMD_FP_REG_Q7, offsetof(CPUARMState, vfp.zregs[7]) }, + { HV_SIMD_FP_REG_Q8, offsetof(CPUARMState, vfp.zregs[8]) }, + { HV_SIMD_FP_REG_Q9, offsetof(CPUARMState, vfp.zregs[9]) }, + { HV_SIMD_FP_REG_Q10, offsetof(CPUARMState, vfp.zregs[10]) }, + { HV_SIMD_FP_REG_Q11, offsetof(CPUARMState, vfp.zregs[11]) }, + { HV_SIMD_FP_REG_Q12, offsetof(CPUARMState, vfp.zregs[12]) }, + { HV_SIMD_FP_REG_Q13, offsetof(CPUARMState, vfp.zregs[13]) }, + { HV_SIMD_FP_REG_Q14, offsetof(CPUARMState, vfp.zregs[14]) }, + { HV_SIMD_FP_REG_Q15, offsetof(CPUARMState, vfp.zregs[15]) }, + { HV_SIMD_FP_REG_Q16, offsetof(CPUARMState, vfp.zregs[16]) }, + { HV_SIMD_FP_REG_Q17, offsetof(CPUARMState, vfp.zregs[17]) }, + { HV_SIMD_FP_REG_Q18, offsetof(CPUARMState, vfp.zregs[18]) }, + { HV_SIMD_FP_REG_Q19, offsetof(CPUARMState, vfp.zregs[19]) }, + { HV_SIMD_FP_REG_Q20, offsetof(CPUARMState, vfp.zregs[20]) }, + { HV_SIMD_FP_REG_Q21, offsetof(CPUARMState, vfp.zregs[21]) }, + { HV_SIMD_FP_REG_Q22, offsetof(CPUARMState, vfp.zregs[22]) }, + { HV_SIMD_FP_REG_Q23, offsetof(CPUARMState, vfp.zregs[23]) }, + { HV_SIMD_FP_REG_Q24, offsetof(CPUARMState, vfp.zregs[24]) }, + { HV_SIMD_FP_REG_Q25, offsetof(CPUARMState, vfp.zregs[25]) }, + { HV_SIMD_FP_REG_Q26, offsetof(CPUARMState, vfp.zregs[26]) }, + { HV_SIMD_FP_REG_Q27, offsetof(CPUARMState, vfp.zregs[27]) }, + { HV_SIMD_FP_REG_Q28, offsetof(CPUARMState, vfp.zregs[28]) }, + { HV_SIMD_FP_REG_Q29, offsetof(CPUARMState, vfp.zregs[29]) }, + { HV_SIMD_FP_REG_Q30, offsetof(CPUARMState, vfp.zregs[30]) }, + { HV_SIMD_FP_REG_Q31, offsetof(CPUARMState, vfp.zregs[31]) }, +}; + +struct hvf_sreg_match { + int reg; + uint32_t key; + uint32_t cp_idx; +}; + +static struct hvf_sreg_match hvf_sreg_match[] = { + { HV_SYS_REG_DBGBVR0_EL1, HVF_SYSREG(0, 0, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR0_EL1, HVF_SYSREG(0, 0, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR0_EL1, HVF_SYSREG(0, 0, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR0_EL1, HVF_SYSREG(0, 0, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR1_EL1, HVF_SYSREG(0, 1, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR1_EL1, HVF_SYSREG(0, 1, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR1_EL1, HVF_SYSREG(0, 1, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR1_EL1, HVF_SYSREG(0, 1, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR2_EL1, HVF_SYSREG(0, 2, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR2_EL1, HVF_SYSREG(0, 2, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR2_EL1, HVF_SYSREG(0, 2, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR2_EL1, HVF_SYSREG(0, 2, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR3_EL1, HVF_SYSREG(0, 3, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR3_EL1, HVF_SYSREG(0, 3, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR3_EL1, HVF_SYSREG(0, 3, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR3_EL1, HVF_SYSREG(0, 3, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR4_EL1, HVF_SYSREG(0, 4, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR4_EL1, HVF_SYSREG(0, 4, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR4_EL1, HVF_SYSREG(0, 4, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR4_EL1, HVF_SYSREG(0, 4, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR5_EL1, HVF_SYSREG(0, 5, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR5_EL1, HVF_SYSREG(0, 5, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR5_EL1, HVF_SYSREG(0, 5, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR5_EL1, HVF_SYSREG(0, 5, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR6_EL1, HVF_SYSREG(0, 6, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR6_EL1, HVF_SYSREG(0, 6, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR6_EL1, HVF_SYSREG(0, 6, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR6_EL1, HVF_SYSREG(0, 6, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR7_EL1, HVF_SYSREG(0, 7, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR7_EL1, HVF_SYSREG(0, 7, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR7_EL1, HVF_SYSREG(0, 7, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR7_EL1, HVF_SYSREG(0, 7, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR8_EL1, HVF_SYSREG(0, 8, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR8_EL1, HVF_SYSREG(0, 8, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR8_EL1, HVF_SYSREG(0, 8, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR8_EL1, HVF_SYSREG(0, 8, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR9_EL1, HVF_SYSREG(0, 9, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR9_EL1, HVF_SYSREG(0, 9, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR9_EL1, HVF_SYSREG(0, 9, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR9_EL1, HVF_SYSREG(0, 9, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR10_EL1, HVF_SYSREG(0, 10, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR10_EL1, HVF_SYSREG(0, 10, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR10_EL1, HVF_SYSREG(0, 10, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR10_EL1, HVF_SYSREG(0, 10, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR11_EL1, HVF_SYSREG(0, 11, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR11_EL1, HVF_SYSREG(0, 11, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR11_EL1, HVF_SYSREG(0, 11, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR11_EL1, HVF_SYSREG(0, 11, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR12_EL1, HVF_SYSREG(0, 12, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR12_EL1, HVF_SYSREG(0, 12, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR12_EL1, HVF_SYSREG(0, 12, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR12_EL1, HVF_SYSREG(0, 12, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR13_EL1, HVF_SYSREG(0, 13, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR13_EL1, HVF_SYSREG(0, 13, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR13_EL1, HVF_SYSREG(0, 13, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR13_EL1, HVF_SYSREG(0, 13, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR14_EL1, HVF_SYSREG(0, 14, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR14_EL1, HVF_SYSREG(0, 14, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR14_EL1, HVF_SYSREG(0, 14, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR14_EL1, HVF_SYSREG(0, 14, 14, 0, 7) }, + + { HV_SYS_REG_DBGBVR15_EL1, HVF_SYSREG(0, 15, 14, 0, 4) }, + { HV_SYS_REG_DBGBCR15_EL1, HVF_SYSREG(0, 15, 14, 0, 5) }, + { HV_SYS_REG_DBGWVR15_EL1, HVF_SYSREG(0, 15, 14, 0, 6) }, + { HV_SYS_REG_DBGWCR15_EL1, HVF_SYSREG(0, 15, 14, 0, 7) }, + +#ifdef SYNC_NO_RAW_REGS + /* + * The registers below are manually synced on init because they are + * marked as NO_RAW. We still list them to make number space sync easier. + */ + { HV_SYS_REG_MDCCINT_EL1, HVF_SYSREG(0, 2, 2, 0, 0) }, + { HV_SYS_REG_MIDR_EL1, HVF_SYSREG(0, 0, 3, 0, 0) }, + { HV_SYS_REG_MPIDR_EL1, HVF_SYSREG(0, 0, 3, 0, 5) }, + { HV_SYS_REG_ID_AA64PFR0_EL1, HVF_SYSREG(0, 4, 3, 0, 0) }, +#endif + { HV_SYS_REG_ID_AA64PFR1_EL1, HVF_SYSREG(0, 4, 3, 0, 2) }, + { HV_SYS_REG_ID_AA64DFR0_EL1, HVF_SYSREG(0, 5, 3, 0, 0) }, + { HV_SYS_REG_ID_AA64DFR1_EL1, HVF_SYSREG(0, 5, 3, 0, 1) }, + { HV_SYS_REG_ID_AA64ISAR0_EL1, HVF_SYSREG(0, 6, 3, 0, 0) }, + { HV_SYS_REG_ID_AA64ISAR1_EL1, HVF_SYSREG(0, 6, 3, 0, 1) }, +#ifdef SYNC_NO_MMFR0 + /* We keep the hardware MMFR0 around. HW limits are there anyway */ + { HV_SYS_REG_ID_AA64MMFR0_EL1, HVF_SYSREG(0, 7, 3, 0, 0) }, +#endif + { HV_SYS_REG_ID_AA64MMFR1_EL1, HVF_SYSREG(0, 7, 3, 0, 1) }, + { HV_SYS_REG_ID_AA64MMFR2_EL1, HVF_SYSREG(0, 7, 3, 0, 2) }, + + { HV_SYS_REG_MDSCR_EL1, HVF_SYSREG(0, 2, 2, 0, 2) }, + { HV_SYS_REG_SCTLR_EL1, HVF_SYSREG(1, 0, 3, 0, 0) }, + { HV_SYS_REG_CPACR_EL1, HVF_SYSREG(1, 0, 3, 0, 2) }, + { HV_SYS_REG_TTBR0_EL1, HVF_SYSREG(2, 0, 3, 0, 0) }, + { HV_SYS_REG_TTBR1_EL1, HVF_SYSREG(2, 0, 3, 0, 1) }, + { HV_SYS_REG_TCR_EL1, HVF_SYSREG(2, 0, 3, 0, 2) }, + + { HV_SYS_REG_APIAKEYLO_EL1, HVF_SYSREG(2, 1, 3, 0, 0) }, + { HV_SYS_REG_APIAKEYHI_EL1, HVF_SYSREG(2, 1, 3, 0, 1) }, + { HV_SYS_REG_APIBKEYLO_EL1, HVF_SYSREG(2, 1, 3, 0, 2) }, + { HV_SYS_REG_APIBKEYHI_EL1, HVF_SYSREG(2, 1, 3, 0, 3) }, + { HV_SYS_REG_APDAKEYLO_EL1, HVF_SYSREG(2, 2, 3, 0, 0) }, + { HV_SYS_REG_APDAKEYHI_EL1, HVF_SYSREG(2, 2, 3, 0, 1) }, + { HV_SYS_REG_APDBKEYLO_EL1, HVF_SYSREG(2, 2, 3, 0, 2) }, + { HV_SYS_REG_APDBKEYHI_EL1, HVF_SYSREG(2, 2, 3, 0, 3) }, + { HV_SYS_REG_APGAKEYLO_EL1, HVF_SYSREG(2, 3, 3, 0, 0) }, + { HV_SYS_REG_APGAKEYHI_EL1, HVF_SYSREG(2, 3, 3, 0, 1) }, + + { HV_SYS_REG_SPSR_EL1, HVF_SYSREG(4, 0, 3, 0, 0) }, + { HV_SYS_REG_ELR_EL1, HVF_SYSREG(4, 0, 3, 0, 1) }, + { HV_SYS_REG_SP_EL0, HVF_SYSREG(4, 1, 3, 0, 0) }, + { HV_SYS_REG_AFSR0_EL1, HVF_SYSREG(5, 1, 3, 0, 0) }, + { HV_SYS_REG_AFSR1_EL1, HVF_SYSREG(5, 1, 3, 0, 1) }, + { HV_SYS_REG_ESR_EL1, HVF_SYSREG(5, 2, 3, 0, 0) }, + { HV_SYS_REG_FAR_EL1, HVF_SYSREG(6, 0, 3, 0, 0) }, + { HV_SYS_REG_PAR_EL1, HVF_SYSREG(7, 4, 3, 0, 0) }, + { HV_SYS_REG_MAIR_EL1, HVF_SYSREG(10, 2, 3, 0, 0) }, + { HV_SYS_REG_AMAIR_EL1, HVF_SYSREG(10, 3, 3, 0, 0) }, + { HV_SYS_REG_VBAR_EL1, HVF_SYSREG(12, 0, 3, 0, 0) }, + { HV_SYS_REG_CONTEXTIDR_EL1, HVF_SYSREG(13, 0, 3, 0, 1) }, + { HV_SYS_REG_TPIDR_EL1, HVF_SYSREG(13, 0, 3, 0, 4) }, + { HV_SYS_REG_CNTKCTL_EL1, HVF_SYSREG(14, 1, 3, 0, 0) }, + { HV_SYS_REG_CSSELR_EL1, HVF_SYSREG(0, 0, 3, 2, 0) }, + { HV_SYS_REG_TPIDR_EL0, HVF_SYSREG(13, 0, 3, 3, 2) }, + { HV_SYS_REG_TPIDRRO_EL0, HVF_SYSREG(13, 0, 3, 3, 3) }, + { HV_SYS_REG_CNTV_CTL_EL0, HVF_SYSREG(14, 3, 3, 3, 1) }, + { HV_SYS_REG_CNTV_CVAL_EL0, HVF_SYSREG(14, 3, 3, 3, 2) }, + { HV_SYS_REG_SP_EL1, HVF_SYSREG(4, 1, 3, 4, 0) }, +}; + +int hvf_get_registers(CPUState *cpu) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + hv_return_t ret; + uint64_t val; + hv_simd_fp_uchar16_t fpval; + int i; + + for (i = 0; i < ARRAY_SIZE(hvf_reg_match); i++) { + ret = hv_vcpu_get_reg(cpu->hvf->fd, hvf_reg_match[i].reg, &val); + *(uint64_t *)((void *)env + hvf_reg_match[i].offset) = val; + assert_hvf_ok(ret); + } + + for (i = 0; i < ARRAY_SIZE(hvf_fpreg_match); i++) { + ret = hv_vcpu_get_simd_fp_reg(cpu->hvf->fd, hvf_fpreg_match[i].reg, + &fpval); + memcpy((void *)env + hvf_fpreg_match[i].offset, &fpval, sizeof(fpval)); + assert_hvf_ok(ret); + } + + val = 0; + ret = hv_vcpu_get_reg(cpu->hvf->fd, HV_REG_FPCR, &val); + assert_hvf_ok(ret); + vfp_set_fpcr(env, val); + + val = 0; + ret = hv_vcpu_get_reg(cpu->hvf->fd, HV_REG_FPSR, &val); + assert_hvf_ok(ret); + vfp_set_fpsr(env, val); + + ret = hv_vcpu_get_reg(cpu->hvf->fd, HV_REG_CPSR, &val); + assert_hvf_ok(ret); + pstate_write(env, val); + + for (i = 0; i < ARRAY_SIZE(hvf_sreg_match); i++) { + if (hvf_sreg_match[i].cp_idx == -1) { + continue; + } + + ret = hv_vcpu_get_sys_reg(cpu->hvf->fd, hvf_sreg_match[i].reg, &val); + assert_hvf_ok(ret); + + arm_cpu->cpreg_values[hvf_sreg_match[i].cp_idx] = val; + } + assert(write_list_to_cpustate(arm_cpu)); + + aarch64_restore_sp(env, arm_current_el(env)); + + return 0; +} + +int hvf_put_registers(CPUState *cpu) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + hv_return_t ret; + uint64_t val; + hv_simd_fp_uchar16_t fpval; + int i; + + for (i = 0; i < ARRAY_SIZE(hvf_reg_match); i++) { + val = *(uint64_t *)((void *)env + hvf_reg_match[i].offset); + ret = hv_vcpu_set_reg(cpu->hvf->fd, hvf_reg_match[i].reg, val); + assert_hvf_ok(ret); + } + + for (i = 0; i < ARRAY_SIZE(hvf_fpreg_match); i++) { + memcpy(&fpval, (void *)env + hvf_fpreg_match[i].offset, sizeof(fpval)); + ret = hv_vcpu_set_simd_fp_reg(cpu->hvf->fd, hvf_fpreg_match[i].reg, + fpval); + assert_hvf_ok(ret); + } + + ret = hv_vcpu_set_reg(cpu->hvf->fd, HV_REG_FPCR, vfp_get_fpcr(env)); + assert_hvf_ok(ret); + + ret = hv_vcpu_set_reg(cpu->hvf->fd, HV_REG_FPSR, vfp_get_fpsr(env)); + assert_hvf_ok(ret); + + ret = hv_vcpu_set_reg(cpu->hvf->fd, HV_REG_CPSR, pstate_read(env)); + assert_hvf_ok(ret); + + aarch64_save_sp(env, arm_current_el(env)); + + assert(write_cpustate_to_list(arm_cpu, false)); + for (i = 0; i < ARRAY_SIZE(hvf_sreg_match); i++) { + if (hvf_sreg_match[i].cp_idx == -1) { + continue; + } + + val = arm_cpu->cpreg_values[hvf_sreg_match[i].cp_idx]; + ret = hv_vcpu_set_sys_reg(cpu->hvf->fd, hvf_sreg_match[i].reg, val); + assert_hvf_ok(ret); + } + + ret = hv_vcpu_set_vtimer_offset(cpu->hvf->fd, hvf_state->vtimer_offset); + assert_hvf_ok(ret); + + return 0; +} + +static void flush_cpu_state(CPUState *cpu) +{ + if (cpu->vcpu_dirty) { + hvf_put_registers(cpu); + cpu->vcpu_dirty = false; + } +} + +static void hvf_set_reg(CPUState *cpu, int rt, uint64_t val) +{ + hv_return_t r; + + flush_cpu_state(cpu); + + if (rt < 31) { + r = hv_vcpu_set_reg(cpu->hvf->fd, HV_REG_X0 + rt, val); + assert_hvf_ok(r); + } +} + +static uint64_t hvf_get_reg(CPUState *cpu, int rt) +{ + uint64_t val = 0; + hv_return_t r; + + flush_cpu_state(cpu); + + if (rt < 31) { + r = hv_vcpu_get_reg(cpu->hvf->fd, HV_REG_X0 + rt, &val); + assert_hvf_ok(r); + } + + return val; +} + +void hvf_arch_vcpu_destroy(CPUState *cpu) +{ +} + +int hvf_arch_init_vcpu(CPUState *cpu) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + uint32_t sregs_match_len = ARRAY_SIZE(hvf_sreg_match); + uint32_t sregs_cnt = 0; + uint64_t pfr; + hv_return_t ret; + int i; + + env->aarch64 = 1; + asm volatile("mrs %0, cntfrq_el0" : "=r"(arm_cpu->gt_cntfrq_hz)); + + /* Allocate enough space for our sysreg sync */ + arm_cpu->cpreg_indexes = g_renew(uint64_t, arm_cpu->cpreg_indexes, + sregs_match_len); + arm_cpu->cpreg_values = g_renew(uint64_t, arm_cpu->cpreg_values, + sregs_match_len); + arm_cpu->cpreg_vmstate_indexes = g_renew(uint64_t, + arm_cpu->cpreg_vmstate_indexes, + sregs_match_len); + arm_cpu->cpreg_vmstate_values = g_renew(uint64_t, + arm_cpu->cpreg_vmstate_values, + sregs_match_len); + + memset(arm_cpu->cpreg_values, 0, sregs_match_len * sizeof(uint64_t)); + + /* Populate cp list for all known sysregs */ + for (i = 0; i < sregs_match_len; i++) { + const ARMCPRegInfo *ri; + uint32_t key = hvf_sreg_match[i].key; + + ri = get_arm_cp_reginfo(arm_cpu->cp_regs, key); + if (ri) { + assert(!(ri->type & ARM_CP_NO_RAW)); + hvf_sreg_match[i].cp_idx = sregs_cnt; + arm_cpu->cpreg_indexes[sregs_cnt++] = cpreg_to_kvm_id(key); + } else { + hvf_sreg_match[i].cp_idx = -1; + } + } + arm_cpu->cpreg_array_len = sregs_cnt; + arm_cpu->cpreg_vmstate_array_len = sregs_cnt; + + assert(write_cpustate_to_list(arm_cpu, false)); + + /* Set CP_NO_RAW system registers on init */ + ret = hv_vcpu_set_sys_reg(cpu->hvf->fd, HV_SYS_REG_MIDR_EL1, + arm_cpu->midr); + assert_hvf_ok(ret); + + ret = hv_vcpu_set_sys_reg(cpu->hvf->fd, HV_SYS_REG_MPIDR_EL1, + arm_cpu->mp_affinity); + assert_hvf_ok(ret); + + ret = hv_vcpu_get_sys_reg(cpu->hvf->fd, HV_SYS_REG_ID_AA64PFR0_EL1, &pfr); + assert_hvf_ok(ret); + pfr |= env->gicv3state ? (1 << 24) : 0; + ret = hv_vcpu_set_sys_reg(cpu->hvf->fd, HV_SYS_REG_ID_AA64PFR0_EL1, pfr); + assert_hvf_ok(ret); + + /* We're limited to underlying hardware caps, override internal versions */ + ret = hv_vcpu_get_sys_reg(cpu->hvf->fd, HV_SYS_REG_ID_AA64MMFR0_EL1, + &arm_cpu->isar.id_aa64mmfr0); + assert_hvf_ok(ret); + + return 0; +} + +void hvf_kick_vcpu_thread(CPUState *cpu) +{ + hv_vcpus_exit(&cpu->hvf->fd, 1); +} + +static void hvf_raise_exception(CPUState *cpu, uint32_t excp, + uint32_t syndrome) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + cpu->exception_index = excp; + env->exception.target_el = 1; + env->exception.syndrome = syndrome; + + arm_cpu_do_interrupt(cpu); +} + +static int hvf_sysreg_read(CPUState *cpu, uint32_t reg, uint32_t rt) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + uint64_t val = 0; + + switch (reg) { + case SYSREG_CNTPCT_EL0: + val = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / + gt_cntfrq_period_ns(arm_cpu); + break; + case SYSREG_OSLSR_EL1: + val = env->cp15.oslsr_el1; + break; + case SYSREG_OSDLR_EL1: + /* Dummy register */ + break; + default: + cpu_synchronize_state(cpu); + trace_hvf_unhandled_sysreg_read(env->pc, reg, + (reg >> 20) & 0x3, + (reg >> 14) & 0x7, + (reg >> 10) & 0xf, + (reg >> 1) & 0xf, + (reg >> 17) & 0x7); + hvf_raise_exception(cpu, EXCP_UDEF, syn_uncategorized()); + return 1; + } + + trace_hvf_sysreg_read(reg, + (reg >> 20) & 0x3, + (reg >> 14) & 0x7, + (reg >> 10) & 0xf, + (reg >> 1) & 0xf, + (reg >> 17) & 0x7, + val); + hvf_set_reg(cpu, rt, val); + + return 0; +} + +static int hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + trace_hvf_sysreg_write(reg, + (reg >> 20) & 0x3, + (reg >> 14) & 0x7, + (reg >> 10) & 0xf, + (reg >> 1) & 0xf, + (reg >> 17) & 0x7, + val); + + switch (reg) { + case SYSREG_OSLAR_EL1: + env->cp15.oslsr_el1 = val & 1; + break; + case SYSREG_OSDLR_EL1: + /* Dummy register */ + break; + default: + cpu_synchronize_state(cpu); + trace_hvf_unhandled_sysreg_write(env->pc, reg, + (reg >> 20) & 0x3, + (reg >> 14) & 0x7, + (reg >> 10) & 0xf, + (reg >> 1) & 0xf, + (reg >> 17) & 0x7); + hvf_raise_exception(cpu, EXCP_UDEF, syn_uncategorized()); + return 1; + } + + return 0; +} + +static int hvf_inject_interrupts(CPUState *cpu) +{ + if (cpu->interrupt_request & CPU_INTERRUPT_FIQ) { + trace_hvf_inject_fiq(); + hv_vcpu_set_pending_interrupt(cpu->hvf->fd, HV_INTERRUPT_TYPE_FIQ, + true); + } + + if (cpu->interrupt_request & CPU_INTERRUPT_HARD) { + trace_hvf_inject_irq(); + hv_vcpu_set_pending_interrupt(cpu->hvf->fd, HV_INTERRUPT_TYPE_IRQ, + true); + } + + return 0; +} + +static uint64_t hvf_vtimer_val_raw(void) +{ + /* + * mach_absolute_time() returns the vtimer value without the VM + * offset that we define. Add our own offset on top. + */ + return mach_absolute_time() - hvf_state->vtimer_offset; +} + +static void hvf_sync_vtimer(CPUState *cpu) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + hv_return_t r; + uint64_t ctl; + bool irq_state; + + if (!cpu->hvf->vtimer_masked) { + /* We will get notified on vtimer changes by hvf, nothing to do */ + return; + } + + r = hv_vcpu_get_sys_reg(cpu->hvf->fd, HV_SYS_REG_CNTV_CTL_EL0, &ctl); + assert_hvf_ok(r); + + irq_state = (ctl & (TMR_CTL_ENABLE | TMR_CTL_IMASK | TMR_CTL_ISTATUS)) == + (TMR_CTL_ENABLE | TMR_CTL_ISTATUS); + qemu_set_irq(arm_cpu->gt_timer_outputs[GTIMER_VIRT], irq_state); + + if (!irq_state) { + /* Timer no longer asserting, we can unmask it */ + hv_vcpu_set_vtimer_mask(cpu->hvf->fd, false); + cpu->hvf->vtimer_masked = false; + } +} + +int hvf_vcpu_exec(CPUState *cpu) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + hv_vcpu_exit_t *hvf_exit = cpu->hvf->exit; + hv_return_t r; + bool advance_pc = false; + + if (hvf_inject_interrupts(cpu)) { + return EXCP_INTERRUPT; + } + + if (cpu->halted) { + return EXCP_HLT; + } + + flush_cpu_state(cpu); + + qemu_mutex_unlock_iothread(); + assert_hvf_ok(hv_vcpu_run(cpu->hvf->fd)); + + /* handle VMEXIT */ + uint64_t exit_reason = hvf_exit->reason; + uint64_t syndrome = hvf_exit->exception.syndrome; + uint32_t ec = syn_get_ec(syndrome); + + qemu_mutex_lock_iothread(); + switch (exit_reason) { + case HV_EXIT_REASON_EXCEPTION: + /* This is the main one, handle below. */ + break; + case HV_EXIT_REASON_VTIMER_ACTIVATED: + qemu_set_irq(arm_cpu->gt_timer_outputs[GTIMER_VIRT], 1); + cpu->hvf->vtimer_masked = true; + return 0; + case HV_EXIT_REASON_CANCELED: + /* we got kicked, no exit to process */ + return 0; + default: + assert(0); + } + + hvf_sync_vtimer(cpu); + + switch (ec) { + case EC_DATAABORT: { + bool isv = syndrome & ARM_EL_ISV; + bool iswrite = (syndrome >> 6) & 1; + bool s1ptw = (syndrome >> 7) & 1; + uint32_t sas = (syndrome >> 22) & 3; + uint32_t len = 1 << sas; + uint32_t srt = (syndrome >> 16) & 0x1f; + uint64_t val = 0; + + trace_hvf_data_abort(env->pc, hvf_exit->exception.virtual_address, + hvf_exit->exception.physical_address, isv, + iswrite, s1ptw, len, srt); + + assert(isv); + + if (iswrite) { + val = hvf_get_reg(cpu, srt); + address_space_write(&address_space_memory, + hvf_exit->exception.physical_address, + MEMTXATTRS_UNSPECIFIED, &val, len); + } else { + address_space_read(&address_space_memory, + hvf_exit->exception.physical_address, + MEMTXATTRS_UNSPECIFIED, &val, len); + hvf_set_reg(cpu, srt, val); + } + + advance_pc = true; + break; + } + case EC_SYSTEMREGISTERTRAP: { + bool isread = (syndrome >> 0) & 1; + uint32_t rt = (syndrome >> 5) & 0x1f; + uint32_t reg = syndrome & SYSREG_MASK; + uint64_t val; + int ret = 0; + + if (isread) { + ret = hvf_sysreg_read(cpu, reg, rt); + } else { + val = hvf_get_reg(cpu, rt); + ret = hvf_sysreg_write(cpu, reg, val); + } + + advance_pc = !ret; + break; + } + case EC_WFX_TRAP: + advance_pc = true; + break; + case EC_AA64_HVC: + cpu_synchronize_state(cpu); + trace_hvf_unknown_hvc(env->xregs[0]); + /* SMCCC 1.3 section 5.2 says every unknown SMCCC call returns -1 */ + env->xregs[0] = -1; + break; + case EC_AA64_SMC: + cpu_synchronize_state(cpu); + trace_hvf_unknown_smc(env->xregs[0]); + hvf_raise_exception(cpu, EXCP_UDEF, syn_uncategorized()); + break; + default: + cpu_synchronize_state(cpu); + trace_hvf_exit(syndrome, ec, env->pc); + error_report("0x%llx: unhandled exception ec=0x%x", env->pc, ec); + } + + if (advance_pc) { + uint64_t pc; + + flush_cpu_state(cpu); + + r = hv_vcpu_get_reg(cpu->hvf->fd, HV_REG_PC, &pc); + assert_hvf_ok(r); + pc += 4; + r = hv_vcpu_set_reg(cpu->hvf->fd, HV_REG_PC, pc); + assert_hvf_ok(r); + } + + return 0; +} + +static const VMStateDescription vmstate_hvf_vtimer = { + .name = "hvf-vtimer", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT64(vtimer_val, HVFVTimer), + VMSTATE_END_OF_LIST() + }, +}; + +static void hvf_vm_state_change(void *opaque, bool running, RunState state) +{ + HVFVTimer *s = opaque; + + if (running) { + /* Update vtimer offset on all CPUs */ + hvf_state->vtimer_offset = mach_absolute_time() - s->vtimer_val; + cpu_synchronize_all_states(); + } else { + /* Remember vtimer value on every pause */ + s->vtimer_val = hvf_vtimer_val_raw(); + } +} + +int hvf_arch_init(void) +{ + hvf_state->vtimer_offset = mach_absolute_time(); + vmstate_register(NULL, 0, &vmstate_hvf_vtimer, &vtimer); + qemu_add_vm_change_state_handler(hvf_vm_state_change, &vtimer); + return 0; +} diff --git a/target/i386/hvf/hvf.c b/target/i386/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf.c +++ b/target/i386/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static inline bool apic_bus_freq_is_known(CPUX86State *env) return env->apic_bus_freq != 0; } +void hvf_kick_vcpu_thread(CPUState *cpu) +{ + cpus_kick_thread(cpu); +} + int hvf_arch_init(void) { return 0; diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: accel/accel-*.c F: accel/Makefile.objs F: accel/stubs/Makefile.objs +Apple Silicon HVF CPUs +M: Alexander Graf <agraf@csgraf.de> +S: Maintained +F: target/arm/hvf/ + X86 HVF CPUs M: Cameron Esfahani <dirty@apple.com> M: Roman Bolshakov <r.bolshakov@yadro.com> diff --git a/target/arm/hvf/trace-events b/target/arm/hvf/trace-events new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/hvf/trace-events @@ -XXX,XX +XXX,XX @@ +hvf_unhandled_sysreg_read(uint64_t pc, uint32_t reg, uint32_t op0, uint32_t op1, uint32_t crn, uint32_t crm, uint32_t op2) "unhandled sysreg read at pc=0x%"PRIx64": 0x%08x (op0=%d op1=%d crn=%d crm=%d op2=%d)" +hvf_unhandled_sysreg_write(uint64_t pc, uint32_t reg, uint32_t op0, uint32_t op1, uint32_t crn, uint32_t crm, uint32_t op2) "unhandled sysreg write at pc=0x%"PRIx64": 0x%08x (op0=%d op1=%d crn=%d crm=%d op2=%d)" +hvf_inject_fiq(void) "injecting FIQ" +hvf_inject_irq(void) "injecting IRQ" +hvf_data_abort(uint64_t pc, uint64_t va, uint64_t pa, bool isv, bool iswrite, bool s1ptw, uint32_t len, uint32_t srt) "data abort: [pc=0x%"PRIx64" va=0x%016"PRIx64" pa=0x%016"PRIx64" isv=%d iswrite=%d s1ptw=%d len=%d srt=%d]" +hvf_sysreg_read(uint32_t reg, uint32_t op0, uint32_t op1, uint32_t crn, uint32_t crm, uint32_t op2, uint64_t val) "sysreg read 0x%08x (op0=%d op1=%d crn=%d crm=%d op2=%d) = 0x%016"PRIx64 +hvf_sysreg_write(uint32_t reg, uint32_t op0, uint32_t op1, uint32_t crn, uint32_t crm, uint32_t op2, uint64_t val) "sysreg write 0x%08x (op0=%d op1=%d crn=%d crm=%d op2=%d, val=0x%016"PRIx64")" +hvf_unknown_hvc(uint64_t x0) "unknown HVC! 0x%016"PRIx64 +hvf_unknown_smc(uint64_t x0) "unknown SMC! 0x%016"PRIx64 +hvf_exit(uint64_t syndrome, uint32_t ec, uint64_t pc) "exit: 0x%"PRIx64" [ec=0x%x pc=0x%"PRIx64"]" -- 2.20.1 From: Peter Collingbourne <pcc@google.com> Sleep on WFI until the VTIMER is due but allow ourselves to be woken up on IPI. In this implementation IPI is blocked on the CPU thread at startup and pselect() is used to atomically unblock the signal and begin sleeping. The signal is sent unconditionally so there's no need to worry about races between actually sleeping and the "we think we're sleeping" state. It may lead to an extra wakeup but that's better than missing it entirely. Signed-off-by: Peter Collingbourne <pcc@google.com> Signed-off-by: Alexander Graf <agraf@csgraf.de> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210916155404.86958-6-agraf@csgraf.de [agraf: Remove unused 'set' variable, always advance PC on WFX trap, support vm stop / continue operations and cntv offsets] Signed-off-by: Alexander Graf <agraf@csgraf.de> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/hvf_int.h | 1 + accel/hvf/hvf-accel-ops.c | 5 +-- target/arm/hvf/hvf.c | 79 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 82 insertions(+), 3 deletions(-) diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ struct hvf_vcpu_state { uint64_t fd; void *exit; bool vtimer_masked; + sigset_t unblock_ipi_mask; }; void assert_hvf_ok(hv_return_t ret); diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static int hvf_init_vcpu(CPUState *cpu) cpu->hvf = g_malloc0(sizeof(*cpu->hvf)); /* init cpu signals */ - sigset_t set; struct sigaction sigact; memset(&sigact, 0, sizeof(sigact)); sigact.sa_handler = dummy_signal; sigaction(SIG_IPI, &sigact, NULL); - pthread_sigmask(SIG_BLOCK, NULL, &set); - sigdelset(&set, SIG_IPI); + pthread_sigmask(SIG_BLOCK, NULL, &cpu->hvf->unblock_ipi_mask); + sigdelset(&cpu->hvf->unblock_ipi_mask, SIG_IPI); #ifdef __aarch64__ r = hv_vcpu_create(&cpu->hvf->fd, (hv_vcpu_exit_t **)&cpu->hvf->exit, NULL); diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ * QEMU Hypervisor.framework support for Apple Silicon * Copyright 2020 Alexander Graf <agraf@csgraf.de> + * Copyright 2020 Google LLC * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ int hvf_arch_init_vcpu(CPUState *cpu) void hvf_kick_vcpu_thread(CPUState *cpu) { + cpus_kick_thread(cpu); hv_vcpus_exit(&cpu->hvf->fd, 1); } @@ -XXX,XX +XXX,XX @@ static uint64_t hvf_vtimer_val_raw(void) return mach_absolute_time() - hvf_state->vtimer_offset; } +static uint64_t hvf_vtimer_val(void) +{ + if (!runstate_is_running()) { + /* VM is paused, the vtimer value is in vtimer.vtimer_val */ + return vtimer.vtimer_val; + } + + return hvf_vtimer_val_raw(); +} + +static void hvf_wait_for_ipi(CPUState *cpu, struct timespec *ts) +{ + /* + * Use pselect to sleep so that other threads can IPI us while we're + * sleeping. + */ + qatomic_mb_set(&cpu->thread_kicked, false); + qemu_mutex_unlock_iothread(); + pselect(0, 0, 0, 0, ts, &cpu->hvf->unblock_ipi_mask); + qemu_mutex_lock_iothread(); +} + +static void hvf_wfi(CPUState *cpu) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + struct timespec ts; + hv_return_t r; + uint64_t ctl; + uint64_t cval; + int64_t ticks_to_sleep; + uint64_t seconds; + uint64_t nanos; + uint32_t cntfrq; + + if (cpu->interrupt_request & (CPU_INTERRUPT_HARD | CPU_INTERRUPT_FIQ)) { + /* Interrupt pending, no need to wait */ + return; + } + + r = hv_vcpu_get_sys_reg(cpu->hvf->fd, HV_SYS_REG_CNTV_CTL_EL0, &ctl); + assert_hvf_ok(r); + + if (!(ctl & 1) || (ctl & 2)) { + /* Timer disabled or masked, just wait for an IPI. */ + hvf_wait_for_ipi(cpu, NULL); + return; + } + + r = hv_vcpu_get_sys_reg(cpu->hvf->fd, HV_SYS_REG_CNTV_CVAL_EL0, &cval); + assert_hvf_ok(r); + + ticks_to_sleep = cval - hvf_vtimer_val(); + if (ticks_to_sleep < 0) { + return; + } + + cntfrq = gt_cntfrq_period_ns(arm_cpu); + seconds = muldiv64(ticks_to_sleep, cntfrq, NANOSECONDS_PER_SECOND); + ticks_to_sleep -= muldiv64(seconds, NANOSECONDS_PER_SECOND, cntfrq); + nanos = ticks_to_sleep * cntfrq; + + /* + * Don't sleep for less than the time a context switch would take, + * so that we can satisfy fast timer requests on the same CPU. + * Measurements on M1 show the sweet spot to be ~2ms. + */ + if (!seconds && nanos < (2 * SCALE_MS)) { + return; + } + + ts = (struct timespec) { seconds, nanos }; + hvf_wait_for_ipi(cpu, &ts); +} + static void hvf_sync_vtimer(CPUState *cpu) { ARMCPU *arm_cpu = ARM_CPU(cpu); @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) } case EC_WFX_TRAP: advance_pc = true; + if (!(syndrome & WFX_IS_WFE)) { + hvf_wfi(cpu); + } break; case EC_AA64_HVC: cpu_synchronize_state(cpu); -- 2.20.1 Now that we have working system register sync, we push more target CPU properties into the virtual machine. That might be useful in some situations, but is not the typical case that users want. So let's add a -cpu host option that allows them to explicitly pass all CPU capabilities of their host CPU into the guest. Signed-off-by: Alexander Graf <agraf@csgraf.de> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-7-agraf@csgraf.de [PMM: drop unnecessary #include line from .h file] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 + target/arm/hvf_arm.h | 18 +++++++++ target/arm/kvm_arm.h | 2 - target/arm/cpu.c | 13 ++++-- target/arm/hvf/hvf.c | 95 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 124 insertions(+), 6 deletions(-) create mode 100644 target/arm/hvf_arm.h diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync); #define ARM_CPU_TYPE_NAME(name) (name ARM_CPU_TYPE_SUFFIX) #define CPU_RESOLVING_TYPE TYPE_ARM_CPU +#define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU + #define cpu_signal_handler cpu_arm_signal_handler #define cpu_list arm_cpu_list diff --git a/target/arm/hvf_arm.h b/target/arm/hvf_arm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/hvf_arm.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU Hypervisor.framework (HVF) support -- ARM specifics + * + * Copyright (c) 2021 Alexander Graf + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#ifndef QEMU_HVF_ARM_H +#define QEMU_HVF_ARM_H + +#include "cpu.h" + +void hvf_arm_set_cpu_features_from_host(struct ARMCPU *cpu); + +#endif diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try, */ void kvm_arm_destroy_scratch_host_vcpu(int *fdarray); -#define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU - /** * ARMHostCPUFeatures: information about the host CPU (identified * by asking the host kernel) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/tcg.h" #include "sysemu/hw_accel.h" #include "kvm_arm.h" +#include "hvf_arm.h" #include "disas/capstone.h" #include "fpu/softfloat.h" @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) * this is the first point where we can report it. */ if (cpu->host_cpu_probe_failed) { - if (!kvm_enabled()) { - error_setg(errp, "The 'host' CPU type can only be used with KVM"); + if (!kvm_enabled() && !hvf_enabled()) { + error_setg(errp, "The 'host' CPU type can only be used with KVM or HVF"); } else { error_setg(errp, "Failed to retrieve host CPU features"); } @@ -XXX,XX +XXX,XX @@ static void arm_cpu_class_init(ObjectClass *oc, void *data) #endif /* CONFIG_TCG */ } -#ifdef CONFIG_KVM +#if defined(CONFIG_KVM) || defined(CONFIG_HVF) static void arm_host_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); +#ifdef CONFIG_KVM kvm_arm_set_cpu_features_from_host(cpu); if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { aarch64_add_sve_properties(obj); } +#else + hvf_arm_set_cpu_features_from_host(cpu); +#endif arm_cpu_post_init(obj); } @@ -XXX,XX +XXX,XX @@ static void arm_cpu_register_types(void) { type_register_static(&arm_cpu_type_info); -#ifdef CONFIG_KVM +#if defined(CONFIG_KVM) || defined(CONFIG_HVF) type_register_static(&host_arm_cpu_type_info); #endif } diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/hvf.h" #include "sysemu/hvf_int.h" #include "sysemu/hw_accel.h" +#include "hvf_arm.h" #include <mach/mach_time.h> @@ -XXX,XX +XXX,XX @@ typedef struct HVFVTimer { static HVFVTimer vtimer; +typedef struct ARMHostCPUFeatures { + ARMISARegisters isar; + uint64_t features; + uint64_t midr; + uint32_t reset_sctlr; + const char *dtb_compatible; +} ARMHostCPUFeatures; + +static ARMHostCPUFeatures arm_host_cpu_features; + struct hvf_reg_match { int reg; uint64_t offset; @@ -XXX,XX +XXX,XX @@ static uint64_t hvf_get_reg(CPUState *cpu, int rt) return val; } +static bool hvf_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) +{ + ARMISARegisters host_isar = {}; + const struct isar_regs { + int reg; + uint64_t *val; + } regs[] = { + { HV_SYS_REG_ID_AA64PFR0_EL1, &host_isar.id_aa64pfr0 }, + { HV_SYS_REG_ID_AA64PFR1_EL1, &host_isar.id_aa64pfr1 }, + { HV_SYS_REG_ID_AA64DFR0_EL1, &host_isar.id_aa64dfr0 }, + { HV_SYS_REG_ID_AA64DFR1_EL1, &host_isar.id_aa64dfr1 }, + { HV_SYS_REG_ID_AA64ISAR0_EL1, &host_isar.id_aa64isar0 }, + { HV_SYS_REG_ID_AA64ISAR1_EL1, &host_isar.id_aa64isar1 }, + { HV_SYS_REG_ID_AA64MMFR0_EL1, &host_isar.id_aa64mmfr0 }, + { HV_SYS_REG_ID_AA64MMFR1_EL1, &host_isar.id_aa64mmfr1 }, + { HV_SYS_REG_ID_AA64MMFR2_EL1, &host_isar.id_aa64mmfr2 }, + }; + hv_vcpu_t fd; + hv_return_t r = HV_SUCCESS; + hv_vcpu_exit_t *exit; + int i; + + ahcf->dtb_compatible = "arm,arm-v8"; + ahcf->features = (1ULL << ARM_FEATURE_V8) | + (1ULL << ARM_FEATURE_NEON) | + (1ULL << ARM_FEATURE_AARCH64) | + (1ULL << ARM_FEATURE_PMU) | + (1ULL << ARM_FEATURE_GENERIC_TIMER); + + /* We set up a small vcpu to extract host registers */ + + if (hv_vcpu_create(&fd, &exit, NULL) != HV_SUCCESS) { + return false; + } + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + r |= hv_vcpu_get_sys_reg(fd, regs[i].reg, regs[i].val); + } + r |= hv_vcpu_get_sys_reg(fd, HV_SYS_REG_MIDR_EL1, &ahcf->midr); + r |= hv_vcpu_destroy(fd); + + ahcf->isar = host_isar; + + /* + * A scratch vCPU returns SCTLR 0, so let's fill our default with the M1 + * boot SCTLR from https://github.com/AsahiLinux/m1n1/issues/97 + */ + ahcf->reset_sctlr = 0x30100180; + /* + * SPAN is disabled by default when SCTLR.SPAN=1. To improve compatibility, + * let's disable it on boot and then allow guest software to turn it on by + * setting it to 0. + */ + ahcf->reset_sctlr |= 0x00800000; + + /* Make sure we don't advertise AArch32 support for EL0/EL1 */ + if ((host_isar.id_aa64pfr0 & 0xff) != 0x11) { + return false; + } + + return r == HV_SUCCESS; +} + +void hvf_arm_set_cpu_features_from_host(ARMCPU *cpu) +{ + if (!arm_host_cpu_features.dtb_compatible) { + if (!hvf_enabled() || + !hvf_arm_get_host_cpu_features(&arm_host_cpu_features)) { + /* + * We can't report this error yet, so flag that we need to + * in arm_cpu_realizefn(). + */ + cpu->host_cpu_probe_failed = true; + return; + } + } + + cpu->dtb_compatible = arm_host_cpu_features.dtb_compatible; + cpu->isar = arm_host_cpu_features.isar; + cpu->env.features = arm_host_cpu_features.features; + cpu->midr = arm_host_cpu_features.midr; + cpu->reset_sctlr = arm_host_cpu_features.reset_sctlr; +} + void hvf_arch_vcpu_destroy(CPUState *cpu) { } -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> We need to handle PSCI calls. Most of the TCG code works for us, but we can simplify it to only handle aa64 mode and we need to handle SUSPEND differently. This patch takes the TCG code as template and duplicates it in HVF. To tell the guest that we support PSCI 0.2 now, update the check in arm_cpu_initfn() as well. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-8-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 4 +- target/arm/hvf/hvf.c | 141 ++++++++++++++++++++++++++++++++++-- target/arm/hvf/trace-events | 1 + 3 files changed, 139 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) cpu->psci_version = 1; /* By default assume PSCI v0.1 */ cpu->kvm_target = QEMU_KVM_ARM_TARGET_NONE; - if (tcg_enabled()) { - cpu->psci_version = 2; /* TCG implements PSCI 0.2 */ + if (tcg_enabled() || hvf_enabled()) { + cpu->psci_version = 2; /* TCG and HVF implement PSCI 0.2 */ } } diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "qemu/main-loop.h" #include "sysemu/cpus.h" +#include "arm-powerctl.h" #include "target/arm/cpu.h" #include "target/arm/internals.h" #include "trace/trace-target_arm_hvf.h" @@ -XXX,XX +XXX,XX @@ #define TMR_CTL_IMASK (1 << 1) #define TMR_CTL_ISTATUS (1 << 2) +static void hvf_wfi(CPUState *cpu); + typedef struct HVFVTimer { /* Vtimer value during migration and paused state */ uint64_t vtimer_val; @@ -XXX,XX +XXX,XX @@ static void hvf_raise_exception(CPUState *cpu, uint32_t excp, arm_cpu_do_interrupt(cpu); } +static void hvf_psci_cpu_off(ARMCPU *arm_cpu) +{ + int32_t ret = arm_set_cpu_off(arm_cpu->mp_affinity); + assert(ret == QEMU_ARM_POWERCTL_RET_SUCCESS); +} + +/* + * Handle a PSCI call. + * + * Returns 0 on success + * -1 when the PSCI call is unknown, + */ +static bool hvf_handle_psci_call(CPUState *cpu) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + uint64_t param[4] = { + env->xregs[0], + env->xregs[1], + env->xregs[2], + env->xregs[3] + }; + uint64_t context_id, mpidr; + bool target_aarch64 = true; + CPUState *target_cpu_state; + ARMCPU *target_cpu; + target_ulong entry; + int target_el = 1; + int32_t ret = 0; + + trace_hvf_psci_call(param[0], param[1], param[2], param[3], + arm_cpu->mp_affinity); + + switch (param[0]) { + case QEMU_PSCI_0_2_FN_PSCI_VERSION: + ret = QEMU_PSCI_0_2_RET_VERSION_0_2; + break; + case QEMU_PSCI_0_2_FN_MIGRATE_INFO_TYPE: + ret = QEMU_PSCI_0_2_RET_TOS_MIGRATION_NOT_REQUIRED; /* No trusted OS */ + break; + case QEMU_PSCI_0_2_FN_AFFINITY_INFO: + case QEMU_PSCI_0_2_FN64_AFFINITY_INFO: + mpidr = param[1]; + + switch (param[2]) { + case 0: + target_cpu_state = arm_get_cpu_by_id(mpidr); + if (!target_cpu_state) { + ret = QEMU_PSCI_RET_INVALID_PARAMS; + break; + } + target_cpu = ARM_CPU(target_cpu_state); + + ret = target_cpu->power_state; + break; + default: + /* Everything above affinity level 0 is always on. */ + ret = 0; + } + break; + case QEMU_PSCI_0_2_FN_SYSTEM_RESET: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + /* + * QEMU reset and shutdown are async requests, but PSCI + * mandates that we never return from the reset/shutdown + * call, so power the CPU off now so it doesn't execute + * anything further. + */ + hvf_psci_cpu_off(arm_cpu); + break; + case QEMU_PSCI_0_2_FN_SYSTEM_OFF: + qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + hvf_psci_cpu_off(arm_cpu); + break; + case QEMU_PSCI_0_1_FN_CPU_ON: + case QEMU_PSCI_0_2_FN_CPU_ON: + case QEMU_PSCI_0_2_FN64_CPU_ON: + mpidr = param[1]; + entry = param[2]; + context_id = param[3]; + ret = arm_set_cpu_on(mpidr, entry, context_id, + target_el, target_aarch64); + break; + case QEMU_PSCI_0_1_FN_CPU_OFF: + case QEMU_PSCI_0_2_FN_CPU_OFF: + hvf_psci_cpu_off(arm_cpu); + break; + case QEMU_PSCI_0_1_FN_CPU_SUSPEND: + case QEMU_PSCI_0_2_FN_CPU_SUSPEND: + case QEMU_PSCI_0_2_FN64_CPU_SUSPEND: + /* Affinity levels are not supported in QEMU */ + if (param[1] & 0xfffe0000) { + ret = QEMU_PSCI_RET_INVALID_PARAMS; + break; + } + /* Powerdown is not supported, we always go into WFI */ + env->xregs[0] = 0; + hvf_wfi(cpu); + break; + case QEMU_PSCI_0_1_FN_MIGRATE: + case QEMU_PSCI_0_2_FN_MIGRATE: + ret = QEMU_PSCI_RET_NOT_SUPPORTED; + break; + default: + return false; + } + + env->xregs[0] = ret; + return true; +} + static int hvf_sysreg_read(CPUState *cpu, uint32_t reg, uint32_t rt) { ARMCPU *arm_cpu = ARM_CPU(cpu); @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) break; case EC_AA64_HVC: cpu_synchronize_state(cpu); - trace_hvf_unknown_hvc(env->xregs[0]); - /* SMCCC 1.3 section 5.2 says every unknown SMCCC call returns -1 */ - env->xregs[0] = -1; + if (arm_cpu->psci_conduit == QEMU_PSCI_CONDUIT_HVC) { + if (!hvf_handle_psci_call(cpu)) { + trace_hvf_unknown_hvc(env->xregs[0]); + /* SMCCC 1.3 section 5.2 says every unknown SMCCC call returns -1 */ + env->xregs[0] = -1; + } + } else { + trace_hvf_unknown_hvc(env->xregs[0]); + hvf_raise_exception(cpu, EXCP_UDEF, syn_uncategorized()); + } break; case EC_AA64_SMC: cpu_synchronize_state(cpu); - trace_hvf_unknown_smc(env->xregs[0]); - hvf_raise_exception(cpu, EXCP_UDEF, syn_uncategorized()); + if (arm_cpu->psci_conduit == QEMU_PSCI_CONDUIT_SMC) { + advance_pc = true; + + if (!hvf_handle_psci_call(cpu)) { + trace_hvf_unknown_smc(env->xregs[0]); + /* SMCCC 1.3 section 5.2 says every unknown SMCCC call returns -1 */ + env->xregs[0] = -1; + } + } else { + trace_hvf_unknown_smc(env->xregs[0]); + hvf_raise_exception(cpu, EXCP_UDEF, syn_uncategorized()); + } break; default: cpu_synchronize_state(cpu); diff --git a/target/arm/hvf/trace-events b/target/arm/hvf/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/trace-events +++ b/target/arm/hvf/trace-events @@ -XXX,XX +XXX,XX @@ hvf_sysreg_write(uint32_t reg, uint32_t op0, uint32_t op1, uint32_t crn, uint32_ hvf_unknown_hvc(uint64_t x0) "unknown HVC! 0x%016"PRIx64 hvf_unknown_smc(uint64_t x0) "unknown SMC! 0x%016"PRIx64 hvf_exit(uint64_t syndrome, uint32_t ec, uint64_t pc) "exit: 0x%"PRIx64" [ec=0x%x pc=0x%"PRIx64"]" +hvf_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid) "PSCI Call x0=0x%016"PRIx64" x1=0x%016"PRIx64" x2=0x%016"PRIx64" x3=0x%016"PRIx64" cpu=0x%x" -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> Now that we have all logic in place that we need to handle Hypervisor.framework on Apple Silicon systems, let's add CONFIG_HVF for aarch64 as well so that we can build it. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> (x86 only) Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210916155404.86958-9-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 7 +++++++ target/arm/hvf/meson.build | 3 +++ target/arm/meson.build | 2 ++ 3 files changed, 12 insertions(+) create mode 100644 target/arm/hvf/meson.build diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ else endif accelerator_targets = { 'CONFIG_KVM': kvm_targets } + +if cpu in ['aarch64'] + accelerator_targets += { + 'CONFIG_HVF': ['aarch64-softmmu'] + } +endif + if cpu in ['x86', 'x86_64', 'arm', 'aarch64'] # i386 emulator provides xenpv machine type for multiple architectures accelerator_targets += { diff --git a/target/arm/hvf/meson.build b/target/arm/hvf/meson.build new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/hvf/meson.build @@ -XXX,XX +XXX,XX @@ +arm_softmmu_ss.add(when: [hvf, 'CONFIG_HVF'], if_true: files( + 'hvf.c', +)) diff --git a/target/arm/meson.build b/target/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/meson.build +++ b/target/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_softmmu_ss.add(files( 'psci.c', )) +subdir('hvf') + target_arch += {'arm': arm_ss} target_softmmu_arch += {'arm': arm_softmmu_ss} -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> We can expose cycle counters on the PMU easily. To be as compatible as possible, let's do so, but make sure we don't expose any other architectural counters that we can not model yet. This allows OSs to work that require PMU support. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-10-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/hvf/hvf.c | 179 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ #define SYSREG_OSLSR_EL1 SYSREG(2, 0, 1, 1, 4) #define SYSREG_OSDLR_EL1 SYSREG(2, 0, 1, 3, 4) #define SYSREG_CNTPCT_EL0 SYSREG(3, 3, 14, 0, 1) +#define SYSREG_PMCR_EL0 SYSREG(3, 3, 9, 12, 0) +#define SYSREG_PMUSERENR_EL0 SYSREG(3, 3, 9, 14, 0) +#define SYSREG_PMCNTENSET_EL0 SYSREG(3, 3, 9, 12, 1) +#define SYSREG_PMCNTENCLR_EL0 SYSREG(3, 3, 9, 12, 2) +#define SYSREG_PMINTENCLR_EL1 SYSREG(3, 0, 9, 14, 2) +#define SYSREG_PMOVSCLR_EL0 SYSREG(3, 3, 9, 12, 3) +#define SYSREG_PMSWINC_EL0 SYSREG(3, 3, 9, 12, 4) +#define SYSREG_PMSELR_EL0 SYSREG(3, 3, 9, 12, 5) +#define SYSREG_PMCEID0_EL0 SYSREG(3, 3, 9, 12, 6) +#define SYSREG_PMCEID1_EL0 SYSREG(3, 3, 9, 12, 7) +#define SYSREG_PMCCNTR_EL0 SYSREG(3, 3, 9, 13, 0) +#define SYSREG_PMCCFILTR_EL0 SYSREG(3, 3, 14, 15, 7) #define WFX_IS_WFE (1 << 0) @@ -XXX,XX +XXX,XX @@ static int hvf_sysreg_read(CPUState *cpu, uint32_t reg, uint32_t rt) val = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / gt_cntfrq_period_ns(arm_cpu); break; + case SYSREG_PMCR_EL0: + val = env->cp15.c9_pmcr; + break; + case SYSREG_PMCCNTR_EL0: + pmu_op_start(env); + val = env->cp15.c15_ccnt; + pmu_op_finish(env); + break; + case SYSREG_PMCNTENCLR_EL0: + val = env->cp15.c9_pmcnten; + break; + case SYSREG_PMOVSCLR_EL0: + val = env->cp15.c9_pmovsr; + break; + case SYSREG_PMSELR_EL0: + val = env->cp15.c9_pmselr; + break; + case SYSREG_PMINTENCLR_EL1: + val = env->cp15.c9_pminten; + break; + case SYSREG_PMCCFILTR_EL0: + val = env->cp15.pmccfiltr_el0; + break; + case SYSREG_PMCNTENSET_EL0: + val = env->cp15.c9_pmcnten; + break; + case SYSREG_PMUSERENR_EL0: + val = env->cp15.c9_pmuserenr; + break; + case SYSREG_PMCEID0_EL0: + case SYSREG_PMCEID1_EL0: + /* We can't really count anything yet, declare all events invalid */ + val = 0; + break; case SYSREG_OSLSR_EL1: val = env->cp15.oslsr_el1; break; @@ -XXX,XX +XXX,XX @@ static int hvf_sysreg_read(CPUState *cpu, uint32_t reg, uint32_t rt) return 0; } +static void pmu_update_irq(CPUARMState *env) +{ + ARMCPU *cpu = env_archcpu(env); + qemu_set_irq(cpu->pmu_interrupt, (env->cp15.c9_pmcr & PMCRE) && + (env->cp15.c9_pminten & env->cp15.c9_pmovsr)); +} + +static bool pmu_event_supported(uint16_t number) +{ + return false; +} + +/* Returns true if the counter (pass 31 for PMCCNTR) should count events using + * the current EL, security state, and register configuration. + */ +static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) +{ + uint64_t filter; + bool enabled, filtered = true; + int el = arm_current_el(env); + + enabled = (env->cp15.c9_pmcr & PMCRE) && + (env->cp15.c9_pmcnten & (1 << counter)); + + if (counter == 31) { + filter = env->cp15.pmccfiltr_el0; + } else { + filter = env->cp15.c14_pmevtyper[counter]; + } + + if (el == 0) { + filtered = filter & PMXEVTYPER_U; + } else if (el == 1) { + filtered = filter & PMXEVTYPER_P; + } + + if (counter != 31) { + /* + * If not checking PMCCNTR, ensure the counter is setup to an event we + * support + */ + uint16_t event = filter & PMXEVTYPER_EVTCOUNT; + if (!pmu_event_supported(event)) { + return false; + } + } + + return enabled && !filtered; +} + +static void pmswinc_write(CPUARMState *env, uint64_t value) +{ + unsigned int i; + for (i = 0; i < pmu_num_counters(env); i++) { + /* Increment a counter's count iff: */ + if ((value & (1 << i)) && /* counter's bit is set */ + /* counter is enabled and not filtered */ + pmu_counter_enabled(env, i) && + /* counter is SW_INCR */ + (env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) { + /* + * Detect if this write causes an overflow since we can't predict + * PMSWINC overflows like we can for other events + */ + uint32_t new_pmswinc = env->cp15.c14_pmevcntr[i] + 1; + + if (env->cp15.c14_pmevcntr[i] & ~new_pmswinc & INT32_MIN) { + env->cp15.c9_pmovsr |= (1 << i); + pmu_update_irq(env); + } + + env->cp15.c14_pmevcntr[i] = new_pmswinc; + } + } +} + static int hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val) { ARMCPU *arm_cpu = ARM_CPU(cpu); @@ -XXX,XX +XXX,XX @@ static int hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val) val); switch (reg) { + case SYSREG_PMCCNTR_EL0: + pmu_op_start(env); + env->cp15.c15_ccnt = val; + pmu_op_finish(env); + break; + case SYSREG_PMCR_EL0: + pmu_op_start(env); + + if (val & PMCRC) { + /* The counter has been reset */ + env->cp15.c15_ccnt = 0; + } + + if (val & PMCRP) { + unsigned int i; + for (i = 0; i < pmu_num_counters(env); i++) { + env->cp15.c14_pmevcntr[i] = 0; + } + } + + env->cp15.c9_pmcr &= ~PMCR_WRITEABLE_MASK; + env->cp15.c9_pmcr |= (val & PMCR_WRITEABLE_MASK); + + pmu_op_finish(env); + break; + case SYSREG_PMUSERENR_EL0: + env->cp15.c9_pmuserenr = val & 0xf; + break; + case SYSREG_PMCNTENSET_EL0: + env->cp15.c9_pmcnten |= (val & pmu_counter_mask(env)); + break; + case SYSREG_PMCNTENCLR_EL0: + env->cp15.c9_pmcnten &= ~(val & pmu_counter_mask(env)); + break; + case SYSREG_PMINTENCLR_EL1: + pmu_op_start(env); + env->cp15.c9_pminten |= val; + pmu_op_finish(env); + break; + case SYSREG_PMOVSCLR_EL0: + pmu_op_start(env); + env->cp15.c9_pmovsr &= ~val; + pmu_op_finish(env); + break; + case SYSREG_PMSWINC_EL0: + pmu_op_start(env); + pmswinc_write(env, val); + pmu_op_finish(env); + break; + case SYSREG_PMSELR_EL0: + env->cp15.c9_pmselr = val & 0x1f; + break; + case SYSREG_PMCCFILTR_EL0: + pmu_op_start(env); + env->cp15.pmccfiltr_el0 = val & PMCCFILTR_EL0; + pmu_op_finish(env); + break; case SYSREG_OSLAR_EL1: env->cp15.oslsr_el1 = val & 1; break; -- 2.20.1 Currently gen_jmp_tb() assumes that if it is called then the jump it is handling is the only reason that we might be trying to end the TB, so it will use goto_tb if it can. This is usually the case: mostly "we did something that means we must end the TB" happens on a non-branch instruction. However, there are cases where we decide early in handling an instruction that we need to end the TB and return to the main loop, and then the insn is a complex one that involves gen_jmp_tb(). For instance, for M-profile FP instructions, in gen_preserve_fp_state() which is called from vfp_access_check() we want to force an exit to the main loop if lazy state preservation is active and we are in icount mode. Make gen_jmp_tb() look at the current value of is_jmp, and only use goto_tb if the previous is_jmp was DISAS_NEXT or DISAS_TOO_MANY. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-2-peter.maydell@linaro.org --- target/arm/translate.c | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_jmp_tb(DisasContext *s, uint32_t dest, int tbno) /* An indirect jump so that we still trigger the debug exception. */ gen_set_pc_im(s, dest); s->base.is_jmp = DISAS_JUMP; - } else { + return; + } + switch (s->base.is_jmp) { + case DISAS_NEXT: + case DISAS_TOO_MANY: + case DISAS_NORETURN: + /* + * The normal case: just go to the destination TB. + * NB: NORETURN happens if we generate code like + * gen_brcondi(l); + * gen_jmp(); + * gen_set_label(l); + * gen_jmp(); + * on the second call to gen_jmp(). + */ gen_goto_tb(s, tbno, dest); + break; + case DISAS_UPDATE_NOCHAIN: + case DISAS_UPDATE_EXIT: + /* + * We already decided we're leaving the TB for some other reason. + * Avoid using goto_tb so we really do exit back to the main loop + * and don't chain to another TB. + */ + gen_set_pc_im(s, dest); + gen_goto_ptr(); + s->base.is_jmp = DISAS_NORETURN; + break; + default: + /* + * We shouldn't be emitting code for a jump and also have + * is_jmp set to one of the special cases like DISAS_SWI. + */ + g_assert_not_reached(); } } -- 2.20.1 Architecturally, for an M-profile CPU with the LOB feature the LTPSIZE field in FPDSCR is always constant 4. QEMU's implementation enforces this everywhere, except that we don't check that it is true in incoming migration data. We're going to add come in gen_update_fp_context() which relies on the "always 4" property. Since this is TCG-only, we don't actually need to be robust to bogus incoming migration data, and the effect of it being wrong would be wrong code generation rather than a QEMU crash; but if it did ever happen somehow it would be very difficult to track down the cause. Add a check so that we fail the inbound migration if the FPDSCR.LTPSIZE value is incorrect. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-3-peter.maydell@linaro.org --- target/arm/machine.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); + /* + * TCG gen_update_fp_context() relies on the invariant that + * FPDSCR.LTPSIZE is constant 4 for M-profile with the LOB extension; + * forbid bogus incoming data with some other value. + */ + if (arm_feature(env, ARM_FEATURE_M) && cpu_isar_feature(aa32_lob, cpu)) { + if (extract32(env->v7m.fpdscr[M_REG_NS], + FPCR_LTPSIZE_SHIFT, FPCR_LTPSIZE_LENGTH) != 4 || + extract32(env->v7m.fpdscr[M_REG_S], + FPCR_LTPSIZE_SHIFT, FPCR_LTPSIZE_LENGTH) != 4) { + return -1; + } + } if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.20.1 Our current codegen for MVE always calls out to helper functions, because some byte lanes might be predicated. The common case is that in fact there is no predication active and all lanes should be updated together, so we can produce better code by detecting that and using the TCG generic vector infrastructure. Add a TB flag that is set when we can guarantee that there is no active MVE predication, and a bool in the DisasContext. Subsequent patches will use this flag to generate improved code for some instructions. In most cases when the predication state changes we simply end the TB after that instruction. For the code called from vfp_access_check() that handles lazy state preservation and creating a new FP context, we can usually avoid having to try to end the TB because luckily the new value of the flag following the register changes in those sequences doesn't depend on any runtime decisions. We do have to end the TB if the guest has enabled lazy FP state preservation but not automatic state preservation, but this is an odd corner case that is not going to be common in real-world code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-4-peter.maydell@linaro.org --- target/arm/cpu.h | 4 +++- target/arm/translate.h | 2 ++ target/arm/helper.c | 33 +++++++++++++++++++++++++++++++++ target/arm/translate-m-nocp.c | 8 +++++++- target/arm/translate-mve.c | 13 ++++++++++++- target/arm/translate-vfp.c | 33 +++++++++++++++++++++++++++------ target/arm/translate.c | 8 ++++++++ 7 files changed, 92 insertions(+), 9 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef ARMCPU ArchCPU; * | TBFLAG_AM32 | +-----+----------+ * | | |TBFLAG_M32| * +-------------+----------------+----------+ - * 31 23 5 4 0 + * 31 23 6 5 0 * * Unless otherwise noted, these bits are cached in env->hflags. */ @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_M32, LSPACT, 2, 1) /* Not cached. */ FIELD(TBFLAG_M32, NEW_FP_CTXT_NEEDED, 3, 1) /* Not cached. */ /* Set if FPCCR.S does not match current security state */ FIELD(TBFLAG_M32, FPCCR_S_WRONG, 4, 1) /* Not cached. */ +/* Set if MVE insns are definitely not predicated by VPR or LTPSIZE */ +FIELD(TBFLAG_M32, MVE_NO_PRED, 5, 1) /* Not cached. */ /* * Bit usage when in AArch64 state diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool align_mem; /* True if PSTATE.IL is set */ bool pstate_il; + /* True if MVE insns are definitely not predicated by VPR or LTPSIZE */ + bool mve_no_pred; /* * >= 0, a copy of PSTATE.BTYPE, which will be 0 without v8.5-BTI. * < 0, set by the current instruction. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline void assert_hflags_rebuild_correctly(CPUARMState *env) #endif } +static bool mve_no_pred(CPUARMState *env) +{ + /* + * Return true if there is definitely no predication of MVE + * instructions by VPR or LTPSIZE. (Returning false even if there + * isn't any predication is OK; generated code will just be + * a little worse.) + * If the CPU does not implement MVE then this TB flag is always 0. + * + * NOTE: if you change this logic, the "recalculate s->mve_no_pred" + * logic in gen_update_fp_context() needs to be updated to match. + * + * We do not include the effect of the ECI bits here -- they are + * tracked in other TB flags. This simplifies the logic for + * "when did we emit code that changes the MVE_NO_PRED TB flag + * and thus need to end the TB?". + */ + if (cpu_isar_feature(aa32_mve, env_archcpu(env))) { + return false; + } + if (env->v7m.vpr) { + return false; + } + if (env->v7m.ltpsize < 4) { + return false; + } + return true; +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { DP_TBFLAG_M32(flags, LSPACT, 1); } + + if (mve_no_pred(env)) { + DP_TBFLAG_M32(flags, MVE_NO_PRED, 1); + } } else { /* * Note that XSCALE_CPAR shares bits with VECSTRIDE. diff --git a/target/arm/translate-m-nocp.c b/target/arm/translate-m-nocp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-m-nocp.c +++ b/target/arm/translate-m-nocp.c @@ -XXX,XX +XXX,XX @@ static bool trans_VLLDM_VLSTM(DisasContext *s, arg_VLLDM_VLSTM *a) clear_eci_state(s); - /* End the TB, because we have updated FP control bits */ + /* + * End the TB, because we have updated FP control bits, + * and possibly VPR or LTPSIZE. + */ s->base.is_jmp = DISAS_UPDATE_EXIT; return true; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, store_cpu_field(control, v7m.control[M_REG_S]); tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); gen_helper_vfp_set_fpscr(cpu_env, tmp); + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; tcg_temp_free_i32(tmp); tcg_temp_free_i32(sfpa); break; @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, } tmp = loadfn(s, opaque, true); store_cpu_field(tmp, v7m.vpr); + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; break; case ARM_VFP_P0: { @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_gen_deposit_i32(vpr, vpr, tmp, R_V7M_VPR_P0_SHIFT, R_V7M_VPR_P0_LENGTH); store_cpu_field(vpr, v7m.vpr); + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; tcg_temp_free_i32(tmp); break; } diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ DO_LOGIC(VORR, gen_helper_mve_vorr) DO_LOGIC(VORN, gen_helper_mve_vorn) DO_LOGIC(VEOR, gen_helper_mve_veor) -DO_LOGIC(VPSEL, gen_helper_mve_vpsel) +static bool trans_VPSEL(DisasContext *s, arg_2op *a) +{ + /* This insn updates predication bits */ + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; + return do_2op(s, a, gen_helper_mve_vpsel); +} #define DO_2OP(INSN, FN) \ static bool trans_##INSN(DisasContext *s, arg_2op *a) \ @@ -XXX,XX +XXX,XX @@ static bool trans_VPNOT(DisasContext *s, arg_VPNOT *a) } gen_helper_mve_vpnot(cpu_env); + /* This insn updates predication bits */ + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; mve_update_eci(s); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_vcmp(DisasContext *s, arg_vcmp *a, MVEGenCmpFn *fn) /* VPT */ gen_vpst(s, a->mask); } + /* This insn updates predication bits */ + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; mve_update_eci(s); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_vcmp_scalar(DisasContext *s, arg_vcmp_scalar *a, /* VPT */ gen_vpst(s, a->mask); } + /* This insn updates predication bits */ + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; mve_update_eci(s); return true; } diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static inline long vfp_f16_offset(unsigned reg, bool top) * Generate code for M-profile lazy FP state preservation if needed; * this corresponds to the pseudocode PreserveFPState() function. */ -static void gen_preserve_fp_state(DisasContext *s) +static void gen_preserve_fp_state(DisasContext *s, bool skip_context_update) { if (s->v7m_lspact) { /* @@ -XXX,XX +XXX,XX @@ static void gen_preserve_fp_state(DisasContext *s) * any further FP insns in this TB. */ s->v7m_lspact = false; + /* + * The helper might have zeroed VPR, so we do not know the + * correct value for the MVE_NO_PRED TB flag any more. + * If we're about to create a new fp context then that + * will precisely determine the MVE_NO_PRED value (see + * gen_update_fp_context()). Otherwise, we must: + * - set s->mve_no_pred to false, so this instruction + * is generated to use helper functions + * - end the TB now, without chaining to the next TB + */ + if (skip_context_update || !s->v7m_new_fp_ctxt_needed) { + s->mve_no_pred = false; + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; + } } } @@ -XXX,XX +XXX,XX @@ static void gen_update_fp_context(DisasContext *s) TCGv_i32 z32 = tcg_const_i32(0); store_cpu_field(z32, v7m.vpr); } - /* - * We don't need to arrange to end the TB, because the only - * parts of FPSCR which we cache in the TB flags are the VECLEN - * and VECSTRIDE, and those don't exist for M-profile. + * We just updated the FPSCR and VPR. Some of this state is cached + * in the MVE_NO_PRED TB flag. We want to avoid having to end the + * TB here, which means we need the new value of the MVE_NO_PRED + * flag to be exactly known here and the same for all executions. + * Luckily FPDSCR.LTPSIZE is always constant 4 and the VPR is + * always set to 0, so the new MVE_NO_PRED flag is always 1 + * if and only if we have MVE. + * + * (The other FPSCR state cached in TB flags is VECLEN and VECSTRIDE, + * but those do not exist for M-profile, so are not relevant here.) */ + s->mve_no_pred = dc_isar_feature(aa32_mve, s); if (s->v8m_secure) { bits |= R_V7M_CONTROL_SFPA_MASK; @@ -XXX,XX +XXX,XX @@ bool vfp_access_check_m(DisasContext *s, bool skip_context_update) /* Handle M-profile lazy FP state mechanics */ /* Trigger lazy-state preservation if necessary */ - gen_preserve_fp_state(s); + gen_preserve_fp_state(s, skip_context_update); if (!skip_context_update) { /* Update ownership of FP context and create new FP context if needed */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_DLS(DisasContext *s, arg_DLS *a) /* DLSTP: set FPSCR.LTPSIZE */ tmp = tcg_const_i32(a->size); store_cpu_field(tmp, v7m.ltpsize); + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_WLS(DisasContext *s, arg_WLS *a) assert(ok); tmp = tcg_const_i32(a->size); store_cpu_field(tmp, v7m.ltpsize); + /* + * LTPSIZE updated, but MVE_NO_PRED will always be the same thing (0) + * when we take this upcoming exit from this TB, so gen_jmp_tb() is OK. + */ } gen_jmp_tb(s, s->base.pc_next, 1); @@ -XXX,XX +XXX,XX @@ static bool trans_VCTP(DisasContext *s, arg_VCTP *a) gen_helper_mve_vctp(cpu_env, masklen); tcg_temp_free_i32(masklen); tcg_temp_free_i32(rn_shifted); + /* This insn updates predication bits */ + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; mve_update_eci(s); return true; } @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v7m_new_fp_ctxt_needed = EX_TBFLAG_M32(tb_flags, NEW_FP_CTXT_NEEDED); dc->v7m_lspact = EX_TBFLAG_M32(tb_flags, LSPACT); + dc->mve_no_pred = EX_TBFLAG_M32(tb_flags, MVE_NO_PRED); } else { dc->debug_target_el = EX_TBFLAG_ANY(tb_flags, DEBUG_TARGET_EL); dc->sctlr_b = EX_TBFLAG_A32(tb_flags, SCTLR__B); -- 2.20.1 When not predicating, implement the MVE bitwise logical insns directly using TCG vector operations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-5-peter.maydell@linaro.org --- target/arm/translate-mve.c | 51 +++++++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 15 deletions(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ static TCGv_ptr mve_qreg_ptr(unsigned reg) return ret; } +static bool mve_no_predication(DisasContext *s) +{ + /* + * Return true if we are executing the entire MVE instruction + * with no predication or partial-execution, and so we can safely + * use an inline TCG vector implementation. + */ + return s->eci == 0 && s->mve_no_pred; +} + static bool mve_check_qreg_bank(DisasContext *s, int qmask) { /* @@ -XXX,XX +XXX,XX @@ static bool trans_VNEG_fp(DisasContext *s, arg_1op *a) return do_1op(s, a, fns[a->size]); } -static bool do_2op(DisasContext *s, arg_2op *a, MVEGenTwoOpFn fn) +static bool do_2op_vec(DisasContext *s, arg_2op *a, MVEGenTwoOpFn fn, + GVecGen3Fn *vecfn) { TCGv_ptr qd, qn, qm; @@ -XXX,XX +XXX,XX @@ static bool do_2op(DisasContext *s, arg_2op *a, MVEGenTwoOpFn fn) return true; } - qd = mve_qreg_ptr(a->qd); - qn = mve_qreg_ptr(a->qn); - qm = mve_qreg_ptr(a->qm); - fn(cpu_env, qd, qn, qm); - tcg_temp_free_ptr(qd); - tcg_temp_free_ptr(qn); - tcg_temp_free_ptr(qm); + if (vecfn && mve_no_predication(s)) { + vecfn(a->size, mve_qreg_offset(a->qd), mve_qreg_offset(a->qn), + mve_qreg_offset(a->qm), 16, 16); + } else { + qd = mve_qreg_ptr(a->qd); + qn = mve_qreg_ptr(a->qn); + qm = mve_qreg_ptr(a->qm); + fn(cpu_env, qd, qn, qm); + tcg_temp_free_ptr(qd); + tcg_temp_free_ptr(qn); + tcg_temp_free_ptr(qm); + } mve_update_eci(s); return true; } -#define DO_LOGIC(INSN, HELPER) \ +static bool do_2op(DisasContext *s, arg_2op *a, MVEGenTwoOpFn *fn) +{ + return do_2op_vec(s, a, fn, NULL); +} + +#define DO_LOGIC(INSN, HELPER, VECFN) \ static bool trans_##INSN(DisasContext *s, arg_2op *a) \ { \ - return do_2op(s, a, HELPER); \ + return do_2op_vec(s, a, HELPER, VECFN); \ } -DO_LOGIC(VAND, gen_helper_mve_vand) -DO_LOGIC(VBIC, gen_helper_mve_vbic) -DO_LOGIC(VORR, gen_helper_mve_vorr) -DO_LOGIC(VORN, gen_helper_mve_vorn) -DO_LOGIC(VEOR, gen_helper_mve_veor) +DO_LOGIC(VAND, gen_helper_mve_vand, tcg_gen_gvec_and) +DO_LOGIC(VBIC, gen_helper_mve_vbic, tcg_gen_gvec_andc) +DO_LOGIC(VORR, gen_helper_mve_vorr, tcg_gen_gvec_or) +DO_LOGIC(VORN, gen_helper_mve_vorn, tcg_gen_gvec_orc) +DO_LOGIC(VEOR, gen_helper_mve_veor, tcg_gen_gvec_xor) static bool trans_VPSEL(DisasContext *s, arg_2op *a) { -- 2.20.1 Optimize MVE arithmetic ops when we have a TCG vector operation we can use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-6-peter.maydell@linaro.org --- target/arm/translate-mve.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ static bool trans_VPSEL(DisasContext *s, arg_2op *a) return do_2op(s, a, gen_helper_mve_vpsel); } -#define DO_2OP(INSN, FN) \ +#define DO_2OP_VEC(INSN, FN, VECFN) \ static bool trans_##INSN(DisasContext *s, arg_2op *a) \ { \ static MVEGenTwoOpFn * const fns[] = { \ @@ -XXX,XX +XXX,XX @@ static bool trans_VPSEL(DisasContext *s, arg_2op *a) gen_helper_mve_##FN##w, \ NULL, \ }; \ - return do_2op(s, a, fns[a->size]); \ + return do_2op_vec(s, a, fns[a->size], VECFN); \ } -DO_2OP(VADD, vadd) -DO_2OP(VSUB, vsub) -DO_2OP(VMUL, vmul) +#define DO_2OP(INSN, FN) DO_2OP_VEC(INSN, FN, NULL) + +DO_2OP_VEC(VADD, vadd, tcg_gen_gvec_add) +DO_2OP_VEC(VSUB, vsub, tcg_gen_gvec_sub) +DO_2OP_VEC(VMUL, vmul, tcg_gen_gvec_mul) DO_2OP(VMULH_S, vmulhs) DO_2OP(VMULH_U, vmulhu) DO_2OP(VRMULH_S, vrmulhs) DO_2OP(VRMULH_U, vrmulhu) -DO_2OP(VMAX_S, vmaxs) -DO_2OP(VMAX_U, vmaxu) -DO_2OP(VMIN_S, vmins) -DO_2OP(VMIN_U, vminu) +DO_2OP_VEC(VMAX_S, vmaxs, tcg_gen_gvec_smax) +DO_2OP_VEC(VMAX_U, vmaxu, tcg_gen_gvec_umax) +DO_2OP_VEC(VMIN_S, vmins, tcg_gen_gvec_smin) +DO_2OP_VEC(VMIN_U, vminu, tcg_gen_gvec_umin) DO_2OP(VABD_S, vabds) DO_2OP(VABD_U, vabdu) DO_2OP(VHADD_S, vhadds) -- 2.20.1 Optimize the MVE VNEG and VABS insns by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-7-peter.maydell@linaro.org --- target/arm/translate-mve.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP(DisasContext *s, arg_VDUP *a) return true; } -static bool do_1op(DisasContext *s, arg_1op *a, MVEGenOneOpFn fn) +static bool do_1op_vec(DisasContext *s, arg_1op *a, MVEGenOneOpFn fn, + GVecGen2Fn vecfn) { TCGv_ptr qd, qm; @@ -XXX,XX +XXX,XX @@ static bool do_1op(DisasContext *s, arg_1op *a, MVEGenOneOpFn fn) return true; } - qd = mve_qreg_ptr(a->qd); - qm = mve_qreg_ptr(a->qm); - fn(cpu_env, qd, qm); - tcg_temp_free_ptr(qd); - tcg_temp_free_ptr(qm); + if (vecfn && mve_no_predication(s)) { + vecfn(a->size, mve_qreg_offset(a->qd), mve_qreg_offset(a->qm), 16, 16); + } else { + qd = mve_qreg_ptr(a->qd); + qm = mve_qreg_ptr(a->qm); + fn(cpu_env, qd, qm); + tcg_temp_free_ptr(qd); + tcg_temp_free_ptr(qm); + } mve_update_eci(s); return true; } -#define DO_1OP(INSN, FN) \ +static bool do_1op(DisasContext *s, arg_1op *a, MVEGenOneOpFn fn) +{ + return do_1op_vec(s, a, fn, NULL); +} + +#define DO_1OP_VEC(INSN, FN, VECFN) \ static bool trans_##INSN(DisasContext *s, arg_1op *a) \ { \ static MVEGenOneOpFn * const fns[] = { \ @@ -XXX,XX +XXX,XX @@ static bool do_1op(DisasContext *s, arg_1op *a, MVEGenOneOpFn fn) gen_helper_mve_##FN##w, \ NULL, \ }; \ - return do_1op(s, a, fns[a->size]); \ + return do_1op_vec(s, a, fns[a->size], VECFN); \ } +#define DO_1OP(INSN, FN) DO_1OP_VEC(INSN, FN, NULL) + DO_1OP(VCLZ, vclz) DO_1OP(VCLS, vcls) -DO_1OP(VABS, vabs) -DO_1OP(VNEG, vneg) +DO_1OP_VEC(VABS, vabs, tcg_gen_gvec_abs) +DO_1OP_VEC(VNEG, vneg, tcg_gen_gvec_neg) DO_1OP(VQABS, vqabs) DO_1OP(VQNEG, vqneg) DO_1OP(VMAXA, vmaxa) -- 2.20.1 Optimize the MVE VDUP insns by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-8-peter.maydell@linaro.org --- target/arm/translate-mve.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP(DisasContext *s, arg_VDUP *a) return true; } - qd = mve_qreg_ptr(a->qd); rt = load_reg(s, a->rt); - tcg_gen_dup_i32(a->size, rt, rt); - gen_helper_mve_vdup(cpu_env, qd, rt); - tcg_temp_free_ptr(qd); + if (mve_no_predication(s)) { + tcg_gen_gvec_dup_i32(a->size, mve_qreg_offset(a->qd), 16, 16, rt); + } else { + qd = mve_qreg_ptr(a->qd); + tcg_gen_dup_i32(a->size, rt, rt); + gen_helper_mve_vdup(cpu_env, qd, rt); + tcg_temp_free_ptr(qd); + } tcg_temp_free_i32(rt); mve_update_eci(s); return true; -- 2.20.1 Optimize the MVE VMVN insn by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-9-peter.maydell@linaro.org --- target/arm/translate-mve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ static bool trans_VREV64(DisasContext *s, arg_1op *a) static bool trans_VMVN(DisasContext *s, arg_1op *a) { - return do_1op(s, a, gen_helper_mve_vmvn); + return do_1op_vec(s, a, gen_helper_mve_vmvn, tcg_gen_gvec_not); } static bool trans_VABS_fp(DisasContext *s, arg_1op *a) -- 2.20.1 Optimize the MVE VSHL and VSHR immediate forms by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-10-peter.maydell@linaro.org --- target/arm/translate-mve.c | 83 +++++++++++++++++++++++++++++--------- 1 file changed, 63 insertions(+), 20 deletions(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ static bool trans_Vimm_1r(DisasContext *s, arg_1imm *a) return do_1imm(s, a, fn); } -static bool do_2shift(DisasContext *s, arg_2shift *a, MVEGenTwoOpShiftFn fn, - bool negateshift) +static bool do_2shift_vec(DisasContext *s, arg_2shift *a, MVEGenTwoOpShiftFn fn, + bool negateshift, GVecGen2iFn vecfn) { TCGv_ptr qd, qm; int shift = a->shift; @@ -XXX,XX +XXX,XX @@ static bool do_2shift(DisasContext *s, arg_2shift *a, MVEGenTwoOpShiftFn fn, shift = -shift; } - qd = mve_qreg_ptr(a->qd); - qm = mve_qreg_ptr(a->qm); - fn(cpu_env, qd, qm, tcg_constant_i32(shift)); - tcg_temp_free_ptr(qd); - tcg_temp_free_ptr(qm); + if (vecfn && mve_no_predication(s)) { + vecfn(a->size, mve_qreg_offset(a->qd), mve_qreg_offset(a->qm), + shift, 16, 16); + } else { + qd = mve_qreg_ptr(a->qd); + qm = mve_qreg_ptr(a->qm); + fn(cpu_env, qd, qm, tcg_constant_i32(shift)); + tcg_temp_free_ptr(qd); + tcg_temp_free_ptr(qm); + } mve_update_eci(s); return true; } -#define DO_2SHIFT(INSN, FN, NEGATESHIFT) \ - static bool trans_##INSN(DisasContext *s, arg_2shift *a) \ - { \ - static MVEGenTwoOpShiftFn * const fns[] = { \ - gen_helper_mve_##FN##b, \ - gen_helper_mve_##FN##h, \ - gen_helper_mve_##FN##w, \ - NULL, \ - }; \ - return do_2shift(s, a, fns[a->size], NEGATESHIFT); \ +static bool do_2shift(DisasContext *s, arg_2shift *a, MVEGenTwoOpShiftFn fn, + bool negateshift) +{ + return do_2shift_vec(s, a, fn, negateshift, NULL); +} + +#define DO_2SHIFT_VEC(INSN, FN, NEGATESHIFT, VECFN) \ + static bool trans_##INSN(DisasContext *s, arg_2shift *a) \ + { \ + static MVEGenTwoOpShiftFn * const fns[] = { \ + gen_helper_mve_##FN##b, \ + gen_helper_mve_##FN##h, \ + gen_helper_mve_##FN##w, \ + NULL, \ + }; \ + return do_2shift_vec(s, a, fns[a->size], NEGATESHIFT, VECFN); \ } -DO_2SHIFT(VSHLI, vshli_u, false) +#define DO_2SHIFT(INSN, FN, NEGATESHIFT) \ + DO_2SHIFT_VEC(INSN, FN, NEGATESHIFT, NULL) + +static void do_gvec_shri_s(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + /* + * We get here with a negated shift count, and we must handle + * shifts by the element size, which tcg_gen_gvec_sari() does not do. + */ + shift = -shift; + if (shift == (8 << vece)) { + shift--; + } + tcg_gen_gvec_sari(vece, dofs, aofs, shift, oprsz, maxsz); +} + +static void do_gvec_shri_u(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + /* + * We get here with a negated shift count, and we must handle + * shifts by the element size, which tcg_gen_gvec_shri() does not do. + */ + shift = -shift; + if (shift == (8 << vece)) { + tcg_gen_gvec_dup_imm(vece, dofs, oprsz, maxsz, 0); + } else { + tcg_gen_gvec_shri(vece, dofs, aofs, shift, oprsz, maxsz); + } +} + +DO_2SHIFT_VEC(VSHLI, vshli_u, false, tcg_gen_gvec_shli) DO_2SHIFT(VQSHLI_S, vqshli_s, false) DO_2SHIFT(VQSHLI_U, vqshli_u, false) DO_2SHIFT(VQSHLUI, vqshlui_s, false) /* These right shifts use a left-shift helper with negated shift count */ -DO_2SHIFT(VSHRI_S, vshli_s, true) -DO_2SHIFT(VSHRI_U, vshli_u, true) +DO_2SHIFT_VEC(VSHRI_S, vshli_s, true, do_gvec_shri_s) +DO_2SHIFT_VEC(VSHRI_U, vshli_u, true, do_gvec_shri_u) DO_2SHIFT(VRSHRI_S, vrshli_s, true) DO_2SHIFT(VRSHRI_U, vrshli_u, true) -- 2.20.1 Optimize the MVE VSHLL insns by using TCG vector ops when possible. This includes the VMOVL insn, which we handle in mve.decode as "VSHLL with zero shift count". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-11-peter.maydell@linaro.org --- target/arm/translate-mve.c | 67 +++++++++++++++++++++++++++++++++----- 1 file changed, 59 insertions(+), 8 deletions(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ DO_2SHIFT_SCALAR(VQSHL_U_scalar, vqshli_u) DO_2SHIFT_SCALAR(VQRSHL_S_scalar, vqrshli_s) DO_2SHIFT_SCALAR(VQRSHL_U_scalar, vqrshli_u) -#define DO_VSHLL(INSN, FN) \ - static bool trans_##INSN(DisasContext *s, arg_2shift *a) \ - { \ - static MVEGenTwoOpShiftFn * const fns[] = { \ - gen_helper_mve_##FN##b, \ - gen_helper_mve_##FN##h, \ - }; \ - return do_2shift(s, a, fns[a->size], false); \ +#define DO_VSHLL(INSN, FN) \ + static bool trans_##INSN(DisasContext *s, arg_2shift *a) \ + { \ + static MVEGenTwoOpShiftFn * const fns[] = { \ + gen_helper_mve_##FN##b, \ + gen_helper_mve_##FN##h, \ + }; \ + return do_2shift_vec(s, a, fns[a->size], false, do_gvec_##FN); \ } +/* + * For the VSHLL vector helpers, the vece is the size of the input + * (ie MO_8 or MO_16); the helpers want to work in the output size. + * The shift count can be 0..<input size>, inclusive. (0 is VMOVL.) + */ +static void do_gvec_vshllbs(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + unsigned ovece = vece + 1; + unsigned ibits = vece == MO_8 ? 8 : 16; + tcg_gen_gvec_shli(ovece, dofs, aofs, ibits, oprsz, maxsz); + tcg_gen_gvec_sari(ovece, dofs, dofs, ibits - shift, oprsz, maxsz); +} + +static void do_gvec_vshllbu(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + unsigned ovece = vece + 1; + tcg_gen_gvec_andi(ovece, dofs, aofs, + ovece == MO_16 ? 0xff : 0xffff, oprsz, maxsz); + tcg_gen_gvec_shli(ovece, dofs, dofs, shift, oprsz, maxsz); +} + +static void do_gvec_vshllts(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + unsigned ovece = vece + 1; + unsigned ibits = vece == MO_8 ? 8 : 16; + if (shift == 0) { + tcg_gen_gvec_sari(ovece, dofs, aofs, ibits, oprsz, maxsz); + } else { + tcg_gen_gvec_andi(ovece, dofs, aofs, + ovece == MO_16 ? 0xff00 : 0xffff0000, oprsz, maxsz); + tcg_gen_gvec_sari(ovece, dofs, dofs, ibits - shift, oprsz, maxsz); + } +} + +static void do_gvec_vshlltu(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + unsigned ovece = vece + 1; + unsigned ibits = vece == MO_8 ? 8 : 16; + if (shift == 0) { + tcg_gen_gvec_shri(ovece, dofs, aofs, ibits, oprsz, maxsz); + } else { + tcg_gen_gvec_andi(ovece, dofs, aofs, + ovece == MO_16 ? 0xff00 : 0xffff0000, oprsz, maxsz); + tcg_gen_gvec_shri(ovece, dofs, dofs, ibits - shift, oprsz, maxsz); + } +} + DO_VSHLL(VSHLL_BS, vshllbs) DO_VSHLL(VSHLL_BU, vshllbu) DO_VSHLL(VSHLL_TS, vshllts) -- 2.20.1 Optimize the MVE shift-and-insert insns by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-12-peter.maydell@linaro.org --- target/arm/translate-mve.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ DO_2SHIFT_VEC(VSHRI_U, vshli_u, true, do_gvec_shri_u) DO_2SHIFT(VRSHRI_S, vrshli_s, true) DO_2SHIFT(VRSHRI_U, vrshli_u, true) -DO_2SHIFT(VSRI, vsri, false) -DO_2SHIFT(VSLI, vsli, false) +DO_2SHIFT_VEC(VSRI, vsri, false, gen_gvec_sri) +DO_2SHIFT_VEC(VSLI, vsli, false, gen_gvec_sli) #define DO_2SHIFT_FP(INSN, FN) \ static bool trans_##INSN(DisasContext *s, arg_2shift *a) \ -- 2.20.1 Optimize the MVE 1op-immediate insns (VORR, VBIC, VMOV) to use TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-13-peter.maydell@linaro.org --- target/arm/translate-mve.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ static bool trans_VADDLV(DisasContext *s, arg_VADDLV *a) return true; } -static bool do_1imm(DisasContext *s, arg_1imm *a, MVEGenOneOpImmFn *fn) +static bool do_1imm(DisasContext *s, arg_1imm *a, MVEGenOneOpImmFn *fn, + GVecGen2iFn *vecfn) { TCGv_ptr qd; uint64_t imm; @@ -XXX,XX +XXX,XX @@ static bool do_1imm(DisasContext *s, arg_1imm *a, MVEGenOneOpImmFn *fn) imm = asimd_imm_const(a->imm, a->cmode, a->op); - qd = mve_qreg_ptr(a->qd); - fn(cpu_env, qd, tcg_constant_i64(imm)); - tcg_temp_free_ptr(qd); + if (vecfn && mve_no_predication(s)) { + vecfn(MO_64, mve_qreg_offset(a->qd), mve_qreg_offset(a->qd), + imm, 16, 16); + } else { + qd = mve_qreg_ptr(a->qd); + fn(cpu_env, qd, tcg_constant_i64(imm)); + tcg_temp_free_ptr(qd); + } mve_update_eci(s); return true; } +static void gen_gvec_vmovi(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t c, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(vece, dofs, oprsz, maxsz, c); +} + static bool trans_Vimm_1r(DisasContext *s, arg_1imm *a) { /* Handle decode of cmode/op here between VORR/VBIC/VMOV */ MVEGenOneOpImmFn *fn; + GVecGen2iFn *vecfn; if ((a->cmode & 1) && a->cmode < 12) { if (a->op) { @@ -XXX,XX +XXX,XX @@ static bool trans_Vimm_1r(DisasContext *s, arg_1imm *a) * so the VBIC becomes a logical AND operation. */ fn = gen_helper_mve_vandi; + vecfn = tcg_gen_gvec_andi; } else { fn = gen_helper_mve_vorri; + vecfn = tcg_gen_gvec_ori; } } else { /* There is one unallocated cmode/op combination in this space */ @@ -XXX,XX +XXX,XX @@ static bool trans_Vimm_1r(DisasContext *s, arg_1imm *a) } /* asimd_imm_const() sorts out VMVNI vs VMOVI for us */ fn = gen_helper_mve_vmovi; + vecfn = gen_gvec_vmovi; } - return do_1imm(s, a, fn); + return do_1imm(s, a, fn, vecfn); } static bool do_2shift_vec(DisasContext *s, arg_2shift *a, MVEGenTwoOpShiftFn fn, -- 2.20.1