The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 The following changes since commit a97978bcc2d1f650c7d411428806e5b03082b8c7: Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210603' into staging (2021-06-03 10:00:35 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210603 for you to fetch changes up to 1c861885894d840235954060050d240259f5340b: tests/unit/test-vmstate: Assert that dup() and mkstemp() succeed (2021-06-03 16:43:27 +0100) ---------------------------------------------------------------- target-arm queue: * Some not-yet-enabled preliminaries for M-profile MVE support * Consistently use "Cortex-Axx", not "Cortex Axx" in docs, comments * docs: Fix installation of man pages with Sphinx 4.x * Mark LDS{MIN,MAX} as signed operations * Fix missing syndrome value for DAIF and PAC check exceptions * Implement BFloat16 extensions * Refactoring of hvf accelerator code in preparation for aarch64 support * Fix some coverity nits in test code ---------------------------------------------------------------- Alexander Graf (12): hvf: Move assert_hvf_ok() into common directory hvf: Move vcpu thread functions into common directory hvf: Move cpu functions into common directory hvf: Move hvf internal definitions into common header hvf: Make hvf_set_phys_mem() static hvf: Remove use of hv_uvaddr_t and hv_gpaddr_t hvf: Split out common code on vcpu init and destroy hvf: Use cpu_synchronize_state() hvf: Make synchronize functions static hvf: Remove hvf-accel-ops.h hvf: Introduce hvf vcpu struct hvf: Simplify post reset/init/loadvm hooks Damien Goutte-Gattat (1): docs: Fix installation of man pages with Sphinx 4.x Jamie Iles (4): target/arm: fix missing exception class target/arm: fold do_raise_exception into raise_exception target/arm: use raise_exception_ra for MTE check failure target/arm: use raise_exception_ra for stack limit exception Peter Maydell (15): target/arm: Add isar feature check functions for MVE target/arm: Update feature checks for insns which are "MVE or FP" target/arm: Move fpsp/fpdp isar check into callers of do_vfp_2op_sp/dp target/arm: Add MVE check to VMOV_reg_sp and VMOV_reg_dp target/arm: Fix return values in fp_sysreg_checks() target/arm: Implement M-profile VPR register target/arm: Make FPSCR.LTPSIZE writable for MVE target/arm: Allow board models to specify initial NS VTOR arm: Consistently use "Cortex-Axx", not "Cortex Axx" tests/qtest/bios-tables-test: Check for dup2() failure tests/qtest/e1000e-test: Check qemu_recv() succeeded tests/qtest/hd-geo-test: Fix checks on mkstemp() return value tests/qtest/pflash-cfi02-test: Avoid potential integer overflow tests/qtest/tpm-tests: Remove unnecessary NULL checks tests/unit/test-vmstate: Assert that dup() and mkstemp() succeed Richard Henderson (13): target/arm: Mark LDS{MIN,MAX} as signed operations target/arm: Add isar_feature_{aa32, aa64, aa64_sve}_bf16 target/arm: Unify unallocated path in disas_fp_1src target/arm: Implement scalar float32 to bfloat16 conversion target/arm: Implement vector float32 to bfloat16 conversion softfpu: Add float_round_to_odd_inf target/arm: Implement bfloat16 dot product (vector) target/arm: Implement bfloat16 dot product (indexed) target/arm: Implement bfloat16 matrix multiply accumulate target/arm: Implement bfloat widening fma (vector) target/arm: Implement bfloat widening fma (indexed) linux-user/aarch64: Enable hwcap bits for bfloat16 target/arm: Enable BFloat16 extensions docs/conf.py | 1 + docs/system/arm/aspeed.rst | 4 +- docs/system/arm/nuvoton.rst | 6 +- docs/system/arm/sabrelite.rst | 2 +- include/fpu/softfloat-types.h | 4 +- include/hw/arm/allwinner-h3.h | 2 +- include/hw/arm/armv7m.h | 2 + include/hw/core/cpu.h | 3 +- include/sysemu/hvf_int.h | 58 +++++ target/arm/cpu.h | 48 +++- target/arm/helper-sve.h | 4 + target/arm/helper.h | 15 ++ target/i386/hvf/hvf-accel-ops.h | 23 -- target/i386/hvf/hvf-i386.h | 33 +-- target/i386/hvf/vmx.h | 24 +- target/i386/hvf/x86hvf.h | 2 - target/arm/neon-dp.decode | 1 + target/arm/neon-shared.decode | 11 + target/arm/sve.decode | 19 +- target/arm/vfp.decode | 2 + accel/hvf/hvf-accel-ops.c | 471 ++++++++++++++++++++++++++++++++++++++++ accel/hvf/hvf-all.c | 47 ++++ hw/arm/armv7m.c | 7 + hw/arm/aspeed.c | 6 +- hw/arm/mcimx6ul-evk.c | 2 +- hw/arm/mcimx7d-sabre.c | 2 +- hw/arm/npcm7xx_boards.c | 4 +- hw/arm/sabrelite.c | 2 +- hw/misc/npcm7xx_clk.c | 2 +- linux-user/elfload.c | 2 + target/arm/cpu.c | 13 ++ target/arm/cpu64.c | 3 + target/arm/cpu_tcg.c | 1 + target/arm/m_helper.c | 5 +- target/arm/machine.c | 20 ++ target/arm/mte_helper.c | 12 +- target/arm/op_helper.c | 32 ++- target/arm/sve_helper.c | 2 + target/arm/translate-a64.c | 155 +++++++++++-- target/arm/translate-neon.c | 91 ++++++++ target/arm/translate-sve.c | 112 ++++++++++ target/arm/translate-vfp.c | 164 ++++++++++---- target/arm/vec_helper.c | 140 +++++++++++- target/arm/vfp_helper.c | 21 +- target/i386/hvf/hvf-accel-ops.c | 146 ------------- target/i386/hvf/hvf.c | 464 +++++---------------------------------- target/i386/hvf/x86.c | 28 +-- target/i386/hvf/x86_descr.c | 26 +-- target/i386/hvf/x86_emu.c | 62 +++--- target/i386/hvf/x86_mmu.c | 4 +- target/i386/hvf/x86_task.c | 12 +- target/i386/hvf/x86hvf.c | 222 +++++++++---------- tests/qtest/bios-tables-test.c | 8 +- tests/qtest/e1000e-test.c | 3 +- tests/qtest/hd-geo-test.c | 4 +- tests/qtest/pflash-cfi02-test.c | 2 +- tests/qtest/tpm-tests.c | 12 +- tests/unit/test-vmstate.c | 5 +- fpu/softfloat-parts.c.inc | 6 +- MAINTAINERS | 8 + accel/hvf/meson.build | 7 + accel/meson.build | 1 + target/i386/hvf/meson.build | 1 - 63 files changed, 1666 insertions(+), 935 deletions(-) create mode 100644 include/sysemu/hvf_int.h delete mode 100644 target/i386/hvf/hvf-accel-ops.h create mode 100644 accel/hvf/hvf-accel-ops.c create mode 100644 accel/hvf/hvf-all.c delete mode 100644 target/i386/hvf/hvf-accel-ops.c create mode 100644 accel/hvf/meson.build Add the isar feature check functions we will need for v8.1M MVE: * a check for MVE present: this corresponds to the pseudocode's CheckDecodeFaults(ExtType_Mve) * a check for the optional floating-point part of MVE: this corresponds to CheckDecodeFaults(ExtType_MveFp) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210520152840.24453-2-peter.maydell@linaro.org --- target/arm/cpu.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_fp16_arith(const ARMISARegisters *id) } } +static inline bool isar_feature_aa32_mve(const ARMISARegisters *id) +{ + /* + * Return true if MVE is supported (either integer or floating point). + * We must check for M-profile as the MVFR1 field means something + * else for A-profile. + */ + return isar_feature_aa32_mprofile(id) && + FIELD_EX32(id->mvfr1, MVFR1, MVE) > 0; +} + +static inline bool isar_feature_aa32_mve_fp(const ARMISARegisters *id) +{ + /* + * Return true if MVE is supported (either integer or floating point). + * We must check for M-profile as the MVFR1 field means something + * else for A-profile. + */ + return isar_feature_aa32_mprofile(id) && + FIELD_EX32(id->mvfr1, MVFR1, MVE) >= 2; +} + static inline bool isar_feature_aa32_vfp_simd(const ARMISARegisters *id) { /* -- 2.20.1 Some v8M instructions are present if either the floating point extension or MVE is implemented. Update our implementation of them to check for MVE as well as for FP. This is all the insns which use CheckDecodeFaults(ExtType_MveOrFp) or CheckDecodeFaults(ExtType_MveOrDpFp) in their pseudocode, which are essentially the loads and stores, moves and sysreg accesses, except for VMOV_reg_sp and VMOV_reg_dp, which we handle in subsequent patches because they need a refactor to provide a place to put the new MVE check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210520152840.24453-3-peter.maydell@linaro.org --- target/arm/translate-vfp.c | 48 +++++++++++++++++++++++--------------- 1 file changed, 29 insertions(+), 19 deletions(-) diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_to_gp(DisasContext *s, arg_VMOV_to_gp *a) /* VMOV scalar to general purpose register */ TCGv_i32 tmp; - /* SIZE == MO_32 is a VFP instruction; otherwise NEON. */ - if (a->size == MO_32 - ? !dc_isar_feature(aa32_fpsp_v2, s) - : !arm_dc_feature(s, ARM_FEATURE_NEON)) { - return false; + /* + * SIZE == MO_32 is a VFP instruction; otherwise NEON. MVE has + * all sizes, whether the CPU has fp or not. + */ + if (!dc_isar_feature(aa32_mve, s)) { + if (a->size == MO_32 + ? !dc_isar_feature(aa32_fpsp_v2, s) + : !arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } } /* UNDEF accesses to D16-D31 if they don't exist */ @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_from_gp(DisasContext *s, arg_VMOV_from_gp *a) /* VMOV general purpose register to scalar */ TCGv_i32 tmp; - /* SIZE == MO_32 is a VFP instruction; otherwise NEON. */ - if (a->size == MO_32 - ? !dc_isar_feature(aa32_fpsp_v2, s) - : !arm_dc_feature(s, ARM_FEATURE_NEON)) { - return false; + /* + * SIZE == MO_32 is a VFP instruction; otherwise NEON. MVE has + * all sizes, whether the CPU has fp or not. + */ + if (!dc_isar_feature(aa32_mve, s)) { + if (a->size == MO_32 + ? !dc_isar_feature(aa32_fpsp_v2, s) + : !arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } } /* UNDEF accesses to D16-D31 if they don't exist */ @@ -XXX,XX +XXX,XX @@ typedef enum FPSysRegCheckResult { static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) { - if (!dc_isar_feature(aa32_fpsp_v2, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return FPSysRegCheckFailed; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_single(DisasContext *s, arg_VMOV_single *a) { TCGv_i32 tmp; - if (!dc_isar_feature(aa32_fpsp_v2, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_64_sp(DisasContext *s, arg_VMOV_64_sp *a) { TCGv_i32 tmp; - if (!dc_isar_feature(aa32_fpsp_v2, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_64_dp(DisasContext *s, arg_VMOV_64_dp *a) * floating point register. Note that this does not require support * for double precision arithmetic. */ - if (!dc_isar_feature(aa32_fpsp_v2, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_hp(DisasContext *s, arg_VLDR_VSTR_sp *a) uint32_t offset; TCGv_i32 addr, tmp; - if (!dc_isar_feature(aa32_fp16_arith, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_sp(DisasContext *s, arg_VLDR_VSTR_sp *a) uint32_t offset; TCGv_i32 addr, tmp; - if (!dc_isar_feature(aa32_fpsp_v2, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_dp(DisasContext *s, arg_VLDR_VSTR_dp *a) TCGv_i64 tmp; /* Note that this does not require support for double arithmetic. */ - if (!dc_isar_feature(aa32_fpsp_v2, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VLDM_VSTM_sp(DisasContext *s, arg_VLDM_VSTM_sp *a) TCGv_i32 addr, tmp; int i, n; - if (!dc_isar_feature(aa32_fpsp_v2, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VLDM_VSTM_dp(DisasContext *s, arg_VLDM_VSTM_dp *a) int i, n; /* Note that this does not require support for double arithmetic. */ - if (!dc_isar_feature(aa32_fpsp_v2, s)) { + if (!dc_isar_feature(aa32_fpsp_v2, s) && !dc_isar_feature(aa32_mve, s)) { return false; } -- 2.20.1 The do_vfp_2op_sp() and do_vfp_2op_dp() functions currently check whether floating point is supported via the aa32_fpdp_v2 and aa32_fpsp_v2 isar checks. For v8.1M MVE support, the VMOV_reg trans functions (but not any of the others) need to update this to also allow the insn if MVE is implemented. Move the check out of the do_ function and into its callsites (which are all implemented via the DO_VFP_2OP macro), so we have a place to change the check for the VMOV insns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210520152840.24453-4-peter.maydell@linaro.org --- target/arm/translate-vfp.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_sp(DisasContext *s, VFPGen2OpSPFn *fn, int vd, int vm) int veclen = s->vec_len; TCGv_i32 f0, fd; - if (!dc_isar_feature(aa32_fpsp_v2, s)) { - return false; - } + /* Note that the caller must check the aa32_fpsp_v2 feature. */ if (!dc_isar_feature(aa32_fpshvec, s) && (veclen != 0 || s->vec_stride != 0)) { @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_hp(DisasContext *s, VFPGen2OpSPFn *fn, int vd, int vm) */ TCGv_i32 f0; + /* Note that the caller must check the aa32_fp16_arith feature */ + if (!dc_isar_feature(aa32_fp16_arith, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_dp(DisasContext *s, VFPGen2OpDPFn *fn, int vd, int vm) int veclen = s->vec_len; TCGv_i64 f0, fd; - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } + /* Note that the caller must check the aa32_fpdp_v2 feature. */ /* UNDEF accesses to D16-D31 if they don't exist */ if (!dc_isar_feature(aa32_simd_r32, s) && ((vd | vm) & 0x10)) { @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a) return true; } -#define DO_VFP_2OP(INSN, PREC, FN) \ +#define DO_VFP_2OP(INSN, PREC, FN, CHECK) \ static bool trans_##INSN##_##PREC(DisasContext *s, \ arg_##INSN##_##PREC *a) \ { \ + if (!dc_isar_feature(CHECK, s)) { \ + return false; \ + } \ return do_vfp_2op_##PREC(s, FN, a->vd, a->vm); \ } -DO_VFP_2OP(VMOV_reg, sp, tcg_gen_mov_i32) -DO_VFP_2OP(VMOV_reg, dp, tcg_gen_mov_i64) +DO_VFP_2OP(VMOV_reg, sp, tcg_gen_mov_i32, aa32_fpsp_v2) +DO_VFP_2OP(VMOV_reg, dp, tcg_gen_mov_i64, aa32_fpdp_v2) -DO_VFP_2OP(VABS, hp, gen_helper_vfp_absh) -DO_VFP_2OP(VABS, sp, gen_helper_vfp_abss) -DO_VFP_2OP(VABS, dp, gen_helper_vfp_absd) +DO_VFP_2OP(VABS, hp, gen_helper_vfp_absh, aa32_fp16_arith) +DO_VFP_2OP(VABS, sp, gen_helper_vfp_abss, aa32_fpsp_v2) +DO_VFP_2OP(VABS, dp, gen_helper_vfp_absd, aa32_fpdp_v2) -DO_VFP_2OP(VNEG, hp, gen_helper_vfp_negh) -DO_VFP_2OP(VNEG, sp, gen_helper_vfp_negs) -DO_VFP_2OP(VNEG, dp, gen_helper_vfp_negd) +DO_VFP_2OP(VNEG, hp, gen_helper_vfp_negh, aa32_fp16_arith) +DO_VFP_2OP(VNEG, sp, gen_helper_vfp_negs, aa32_fpsp_v2) +DO_VFP_2OP(VNEG, dp, gen_helper_vfp_negd, aa32_fpdp_v2) static void gen_VSQRT_hp(TCGv_i32 vd, TCGv_i32 vm) { @@ -XXX,XX +XXX,XX @@ static void gen_VSQRT_dp(TCGv_i64 vd, TCGv_i64 vm) gen_helper_vfp_sqrtd(vd, vm, cpu_env); } -DO_VFP_2OP(VSQRT, hp, gen_VSQRT_hp) -DO_VFP_2OP(VSQRT, sp, gen_VSQRT_sp) -DO_VFP_2OP(VSQRT, dp, gen_VSQRT_dp) +DO_VFP_2OP(VSQRT, hp, gen_VSQRT_hp, aa32_fp16_arith) +DO_VFP_2OP(VSQRT, sp, gen_VSQRT_sp, aa32_fpsp_v2) +DO_VFP_2OP(VSQRT, dp, gen_VSQRT_dp, aa32_fpdp_v2) static bool trans_VCMP_hp(DisasContext *s, arg_VCMP_sp *a) { -- 2.20.1 Split out the handling of VMOV_reg_sp and VMOV_reg_dp so that we can permit the insns if either FP or MVE are present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210520152840.24453-5-peter.maydell@linaro.org --- target/arm/translate-vfp.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a) return do_vfp_2op_##PREC(s, FN, a->vd, a->vm); \ } -DO_VFP_2OP(VMOV_reg, sp, tcg_gen_mov_i32, aa32_fpsp_v2) -DO_VFP_2OP(VMOV_reg, dp, tcg_gen_mov_i64, aa32_fpdp_v2) +#define DO_VFP_VMOV(INSN, PREC, FN) \ + static bool trans_##INSN##_##PREC(DisasContext *s, \ + arg_##INSN##_##PREC *a) \ + { \ + if (!dc_isar_feature(aa32_fp##PREC##_v2, s) && \ + !dc_isar_feature(aa32_mve, s)) { \ + return false; \ + } \ + return do_vfp_2op_##PREC(s, FN, a->vd, a->vm); \ + } + +DO_VFP_VMOV(VMOV_reg, sp, tcg_gen_mov_i32) +DO_VFP_VMOV(VMOV_reg, dp, tcg_gen_mov_i64) DO_VFP_2OP(VABS, hp, gen_helper_vfp_absh, aa32_fp16_arith) DO_VFP_2OP(VABS, sp, gen_helper_vfp_abss, aa32_fpsp_v2) -- 2.20.1 The fp_sysreg_checks() function is supposed to be returning an FPSysRegCheckResult, which is an enum with three possible values. However, three places in the function "return false" (a hangover from a previous iteration of the design where the function just returned a bool). Make these return FPSysRegCheckFailed instead (for no functional change, since both false and FPSysRegCheckFailed are zero). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210520152840.24453-6-peter.maydell@linaro.org --- target/arm/translate-vfp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) break; case ARM_VFP_FPSCR_NZCVQC: if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { - return false; + return FPSysRegCheckFailed; } break; case ARM_VFP_FPCXT_S: case ARM_VFP_FPCXT_NS: if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { - return false; + return FPSysRegCheckFailed; } if (!s->v8m_secure) { - return false; + return FPSysRegCheckFailed; } break; default: -- 2.20.1 If MVE is implemented for an M-profile CPU then it has a VPR register, which tracks predication information. Implement the read and write handling of this register, and the migration of its state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210520152840.24453-7-peter.maydell@linaro.org --- target/arm/cpu.h | 6 ++++++ target/arm/machine.c | 19 +++++++++++++++++++ target/arm/translate-vfp.c | 38 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t cpacr[M_REG_NUM_BANKS]; uint32_t nsacr; int ltpsize; + uint32_t vpr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_FPCCR, ASPEN, 31, 1) R_V7M_FPCCR_UFRDY_MASK | \ R_V7M_FPCCR_ASPEN_MASK) +/* v7M VPR bits */ +FIELD(V7M_VPR, P0, 0, 16) +FIELD(V7M_VPR, MASK01, 16, 4) +FIELD(V7M_VPR, MASK23, 20, 4) + /* * System register ID fields. */ diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_fp = { } }; +static bool mve_needed(void *opaque) +{ + ARMCPU *cpu = opaque; + + return cpu_isar_feature(aa32_mve, cpu); +} + +static const VMStateDescription vmstate_m_mve = { + .name = "cpu/m/mve", + .version_id = 1, + .minimum_version_id = 1, + .needed = mve_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(env.v7m.vpr, ARMCPU), + VMSTATE_END_OF_LIST() + }, +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_other_sp, &vmstate_m_v8m, &vmstate_m_fp, + &vmstate_m_mve, NULL } }; diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return FPSysRegCheckFailed; } break; + case ARM_VFP_VPR: + case ARM_VFP_P0: + if (!dc_isar_feature(aa32_mve, s)) { + return FPSysRegCheckFailed; + } + break; default: return FPSysRegCheckFailed; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(sfpa); break; } + case ARM_VFP_VPR: + /* Behaves as NOP if not privileged */ + if (IS_USER(s)) { + break; + } + tmp = loadfn(s, opaque); + store_cpu_field(tmp, v7m.vpr); + break; + case ARM_VFP_P0: + { + TCGv_i32 vpr; + tmp = loadfn(s, opaque); + vpr = load_cpu_field(v7m.vpr); + tcg_gen_deposit_i32(vpr, vpr, tmp, + R_V7M_VPR_P0_SHIFT, R_V7M_VPR_P0_LENGTH); + store_cpu_field(vpr, v7m.vpr); + tcg_temp_free_i32(tmp); + break; + } default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, tcg_temp_free_i32(fpscr); break; } + case ARM_VFP_VPR: + /* Behaves as NOP if not privileged */ + if (IS_USER(s)) { + break; + } + tmp = load_cpu_field(v7m.vpr); + storefn(s, opaque, tmp); + break; + case ARM_VFP_P0: + tmp = load_cpu_field(v7m.vpr); + tcg_gen_extract_i32(tmp, tmp, R_V7M_VPR_P0_SHIFT, R_V7M_VPR_P0_LENGTH); + storefn(s, opaque, tmp); + break; default: g_assert_not_reached(); } -- 2.20.1 The M-profile FPSCR has an LTPSIZE field, but if MVE is not implemented it is read-only and always reads as 4; this is how QEMU currently handles it. Make the field writable when MVE is implemented. We can safely add the field to the MVE migration struct because currently no CPUs enable MVE and so the migration struct is never used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210520152840.24453-8-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++- target/arm/machine.c | 1 + target/arm/vfp_helper.c | 9 ++++++--- 3 files changed, 9 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t fpdscr[M_REG_NUM_BANKS]; uint32_t cpacr[M_REG_NUM_BANKS]; uint32_t nsacr; - int ltpsize; + uint32_t ltpsize; uint32_t vpr; } v7m; @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val); #define FPCR_LTPSIZE_SHIFT 16 /* LTPSIZE, M-profile only */ #define FPCR_LTPSIZE_MASK (7 << FPCR_LTPSIZE_SHIFT) +#define FPCR_LTPSIZE_LENGTH 3 #define FPCR_NZCV_MASK (FPCR_N | FPCR_Z | FPCR_C | FPCR_V) #define FPCR_NZCVQC_MASK (FPCR_NZCV_MASK | FPCR_QC) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_mve = { .needed = mve_needed, .fields = (VMStateField[]) { VMSTATE_UINT32(env.v7m.vpr, ARMCPU), + VMSTATE_UINT32(env.v7m.ltpsize, ARMCPU), VMSTATE_END_OF_LIST() }, }; diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t vfp_get_fpscr(CPUARMState *env) void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) { + ARMCPU *cpu = env_archcpu(env); + /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */ - if (!cpu_isar_feature(any_fp16, env_archcpu(env))) { + if (!cpu_isar_feature(any_fp16, cpu)) { val &= ~FPCR_FZ16; } @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) * because in v7A no-short-vector-support cores still had to * allow Stride/Len to be written with the only effect that * some insns are required to UNDEF if the guest sets them. - * - * TODO: if M-profile MVE implemented, set LTPSIZE. */ env->vfp.vec_len = extract32(val, 16, 3); env->vfp.vec_stride = extract32(val, 20, 2); + } else if (cpu_isar_feature(aa32_mve, cpu)) { + env->v7m.ltpsize = extract32(val, FPCR_LTPSIZE_SHIFT, + FPCR_LTPSIZE_LENGTH); } if (arm_feature(env, ARM_FEATURE_NEON)) { -- 2.20.1 Currently we allow board models to specify the initial value of the Secure VTOR register, using an init-svtor property on the TYPE_ARMV7M object which is plumbed through to the CPU. Allow board models to also specify the initial value of the Non-secure VTOR via a similar init-nsvtor property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210520152840.24453-10-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 ++ target/arm/cpu.h | 2 ++ hw/arm/armv7m.c | 7 +++++++ target/arm/cpu.c | 10 ++++++++++ 4 files changed, 21 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ARMv7MState, ARMV7M) * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) + * + Property "init-nsvtor": non-secure VTOR reset value (forwarded to CPU object) * + Property "vfp": enable VFP (forwarded to CPU object) * + Property "dsp": enable DSP (forwarded to CPU object) * + Property "enable-bitband": expose bitbanded IO @@ -XXX,XX +XXX,XX @@ struct ARMv7MState { MemoryRegion *board_memory; Object *idau; uint32_t init_svtor; + uint32_t init_nsvtor; bool enable_bitband; bool start_powered_off; bool vfp; diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* For v8M, initial value of the Secure VTOR */ uint32_t init_svtor; + /* For v8M, initial value of the Non-secure VTOR */ + uint32_t init_nsvtor; /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } } + if (object_property_find(OBJECT(s->cpu), "init-nsvtor")) { + if (!object_property_set_uint(OBJECT(s->cpu), "init-nsvtor", + s->init_nsvtor, errp)) { + return; + } + } if (object_property_find(OBJECT(s->cpu), "start-powered-off")) { if (!object_property_set_bool(OBJECT(s->cpu), "start-powered-off", s->start_powered_off, errp)) { @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), + DEFINE_PROP_UINT32("init-nsvtor", ARMv7MState, init_nsvtor, 0), DEFINE_PROP_BOOL("enable-bitband", ARMv7MState, enable_bitband, false), DEFINE_PROP_BOOL("start-powered-off", ARMv7MState, start_powered_off, false), diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->regs[14] = 0xffffffff; env->v7m.vecbase[M_REG_S] = cpu->init_svtor & 0xffffff80; + env->v7m.vecbase[M_REG_NS] = cpu->init_nsvtor & 0xffffff80; /* Load the initial SP and PC from offset 0 and 4 in the vector table */ vecbase = env->v7m.vecbase[env->v7m.secure]; @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) &cpu->init_svtor, OBJ_PROP_FLAG_READWRITE); } + if (arm_feature(&cpu->env, ARM_FEATURE_M)) { + /* + * Initial value of the NS VTOR (for cores without the Security + * extension, this is the only VTOR) + */ + object_property_add_uint32_ptr(obj, "init-nsvtor", + &cpu->init_nsvtor, + OBJ_PROP_FLAG_READWRITE); + } qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property); -- 2.20.1 The official punctuation for Arm CPU names uses a hyphen, like "Cortex-A9". We mostly follow this, but in a few places usage without the hyphen has crept in. Fix those so we consistently use the same way of writing the CPU name. This commit was created with: git grep -z -l 'Cortex ' | xargs -0 sed -i 's/Cortex /Cortex-/' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210527095152.10968-1-peter.maydell@linaro.org --- docs/system/arm/aspeed.rst | 4 ++-- docs/system/arm/nuvoton.rst | 6 +++--- docs/system/arm/sabrelite.rst | 2 +- include/hw/arm/allwinner-h3.h | 2 +- hw/arm/aspeed.c | 6 +++--- hw/arm/mcimx6ul-evk.c | 2 +- hw/arm/mcimx7d-sabre.c | 2 +- hw/arm/npcm7xx_boards.c | 4 ++-- hw/arm/sabrelite.c | 2 +- hw/misc/npcm7xx_clk.c | 2 +- 10 files changed, 16 insertions(+), 16 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ The QEMU Aspeed machines model BMCs of various OpenPOWER systems and Aspeed evaluation boards. They are based on different releases of the Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the AST2500 with an ARM1176JZS CPU (800MHz) and more recently the AST2600 -with dual cores ARM Cortex A7 CPUs (1.2GHz). +with dual cores ARM Cortex-A7 CPUs (1.2GHz). The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C, etc. @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : AST2600 SoC based machines : -- ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex A7) +- ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex-A7) - ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC Supported devices diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Nuvoton iBMC boards (``npcm750-evb``, ``quanta-gsj``) The `Nuvoton iBMC`_ chips (NPCM7xx) are a family of ARM-based SoCs that are designed to be used as Baseboard Management Controllers (BMCs) in various -servers. They all feature one or two ARM Cortex A9 CPU cores, as well as an +servers. They all feature one or two ARM Cortex-A9 CPU cores, as well as an assortment of peripherals targeted for either Enterprise or Data Center / Hyperscale applications. The former is a superset of the latter, so NPCM750 has all the peripherals of NPCM730 and more. .. _Nuvoton iBMC: https://www.nuvoton.com/products/cloud-computing/ibmc/ -The NPCM750 SoC has two Cortex A9 cores and is targeted for the Enterprise +The NPCM750 SoC has two Cortex-A9 cores and is targeted for the Enterprise segment. The following machines are based on this chip : - ``npcm750-evb`` Nuvoton NPCM750 Evaluation board -The NPCM730 SoC has two Cortex A9 cores and is targeted for Data Center and +The NPCM730 SoC has two Cortex-A9 cores and is targeted for Data Center and Hyperscale applications. The following machines are based on this chip : - ``quanta-gsj`` Quanta GSJ server BMC diff --git a/docs/system/arm/sabrelite.rst b/docs/system/arm/sabrelite.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/sabrelite.rst +++ b/docs/system/arm/sabrelite.rst @@ -XXX,XX +XXX,XX @@ Supported devices The SABRE Lite machine supports the following devices: - * Up to 4 Cortex A9 cores + * Up to 4 Cortex-A9 cores * Generic Interrupt Controller * 1 Clock Controller Module * 1 System Reset Controller diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ */ /* - * The Allwinner H3 is a System on Chip containing four ARM Cortex A7 + * The Allwinner H3 is a System on Chip containing four ARM Cortex-A7 * processor cores. Features and specifications include DDR2/DDR3 memory, * SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and * various I/O modules. diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); - mc->desc = "Aspeed AST2600 EVB (Cortex A7)"; + mc->desc = "Aspeed AST2600 EVB (Cortex-A7)"; amc->soc_name = "ast2600-a1"; amc->hw_strap1 = AST2600_EVB_HW_STRAP1; amc->hw_strap2 = AST2600_EVB_HW_STRAP2; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data) MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); - mc->desc = "OpenPOWER Tacoma BMC (Cortex A7)"; + mc->desc = "OpenPOWER Tacoma BMC (Cortex-A7)"; amc->soc_name = "ast2600-a1"; amc->hw_strap1 = TACOMA_BMC_HW_STRAP1; amc->hw_strap2 = TACOMA_BMC_HW_STRAP2; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data) MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); - mc->desc = "IBM Rainier BMC (Cortex A7)"; + mc->desc = "IBM Rainier BMC (Cortex-A7)"; amc->soc_name = "ast2600-a1"; amc->hw_strap1 = RAINIER_BMC_HW_STRAP1; amc->hw_strap2 = RAINIER_BMC_HW_STRAP2; diff --git a/hw/arm/mcimx6ul-evk.c b/hw/arm/mcimx6ul-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mcimx6ul-evk.c +++ b/hw/arm/mcimx6ul-evk.c @@ -XXX,XX +XXX,XX @@ static void mcimx6ul_evk_init(MachineState *machine) static void mcimx6ul_evk_machine_init(MachineClass *mc) { - mc->desc = "Freescale i.MX6UL Evaluation Kit (Cortex A7)"; + mc->desc = "Freescale i.MX6UL Evaluation Kit (Cortex-A7)"; mc->init = mcimx6ul_evk_init; mc->max_cpus = FSL_IMX6UL_NUM_CPUS; mc->default_ram_id = "mcimx6ul-evk.ram"; diff --git a/hw/arm/mcimx7d-sabre.c b/hw/arm/mcimx7d-sabre.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mcimx7d-sabre.c +++ b/hw/arm/mcimx7d-sabre.c @@ -XXX,XX +XXX,XX @@ static void mcimx7d_sabre_init(MachineState *machine) static void mcimx7d_sabre_machine_init(MachineClass *mc) { - mc->desc = "Freescale i.MX7 DUAL SABRE (Cortex A7)"; + mc->desc = "Freescale i.MX7 DUAL SABRE (Cortex-A7)"; mc->init = mcimx7d_sabre_init; mc->max_cpus = FSL_IMX7_NUM_CPUS; mc->default_ram_id = "mcimx7d-sabre.ram"; diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ static void npcm750_evb_machine_class_init(ObjectClass *oc, void *data) npcm7xx_set_soc_type(nmc, TYPE_NPCM750); - mc->desc = "Nuvoton NPCM750 Evaluation Board (Cortex A9)"; + mc->desc = "Nuvoton NPCM750 Evaluation Board (Cortex-A9)"; mc->init = npcm750_evb_init; mc->default_ram_size = 512 * MiB; }; @@ -XXX,XX +XXX,XX @@ static void gsj_machine_class_init(ObjectClass *oc, void *data) npcm7xx_set_soc_type(nmc, TYPE_NPCM730); - mc->desc = "Quanta GSJ (Cortex A9)"; + mc->desc = "Quanta GSJ (Cortex-A9)"; mc->init = quanta_gsj_init; mc->default_ram_size = 512 * MiB; }; diff --git a/hw/arm/sabrelite.c b/hw/arm/sabrelite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sabrelite.c +++ b/hw/arm/sabrelite.c @@ -XXX,XX +XXX,XX @@ static void sabrelite_init(MachineState *machine) static void sabrelite_machine_init(MachineClass *mc) { - mc->desc = "Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)"; + mc->desc = "Freescale i.MX6 Quad SABRE Lite Board (Cortex-A9)"; mc->init = sabrelite_init; mc->max_cpus = FSL_IMX6_NUM_CPUS; mc->ignore_memory_transaction_failures = true; diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_CLOCK_REF_HZ (25000000) /* Register Field Definitions */ -#define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex A9 Cores */ +#define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex-A9 Cores */ #define PLLCON_LOKI BIT(31) #define PLLCON_LOKS BIT(30) -- 2.20.1 From: Damien Goutte-Gattat <dgouttegattat@incenp.org> The 4.x branch of Sphinx introduces a breaking change, as generated man pages are now written to subdirectories corresponding to the manual section they belong to. This results in `make install` erroring out when attempting to install the man pages, because they are not where it expects to find them. This patch restores the behavior of Sphinx 3.x regarding man pages. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/256 Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org> Message-id: 20210503161422.15028-1-dgouttegattat@incenp.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/conf.py | 1 + 1 file changed, 1 insertion(+) diff --git a/docs/conf.py b/docs/conf.py index XXXXXXX..XXXXXXX 100644 --- a/docs/conf.py +++ b/docs/conf.py @@ -XXX,XX +XXX,XX @@ ['Stefan Hajnoczi <stefanha@redhat.com>', 'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1), ] +man_make_section_directory = False # -- Options for Texinfo output ------------------------------------------- -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The operands to tcg_gen_atomic_fetch_s{min,max}_i64 must be signed, so that the inputs are properly extended. Zero extend the result afterward, as needed. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/364 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210602020720.47679-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, int o3_opc = extract32(insn, 12, 4); bool r = extract32(insn, 22, 1); bool a = extract32(insn, 23, 1); - TCGv_i64 tcg_rs, clean_addr; + TCGv_i64 tcg_rs, tcg_rt, clean_addr; AtomicThreeOpFn *fn = NULL; + MemOp mop = s->be_data | size | MO_ALIGN; if (is_vector || !dc_isar_feature(aa64_atomics, s)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, break; case 004: /* LDSMAX */ fn = tcg_gen_atomic_fetch_smax_i64; + mop |= MO_SIGN; break; case 005: /* LDSMIN */ fn = tcg_gen_atomic_fetch_smin_i64; + mop |= MO_SIGN; break; case 006: /* LDUMAX */ fn = tcg_gen_atomic_fetch_umax_i64; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, } tcg_rs = read_cpu_reg(s, rs, true); + tcg_rt = cpu_reg(s, rt); if (o3_opc == 1) { /* LDCLR */ tcg_gen_not_i64(tcg_rs, tcg_rs); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, /* The tcg atomic primitives are all full barriers. Therefore we * can ignore the Acquire and Release bits of this instruction. */ - fn(cpu_reg(s, rt), clean_addr, tcg_rs, get_mem_index(s), - s->be_data | size | MO_ALIGN); + fn(tcg_rt, clean_addr, tcg_rs, get_mem_index(s), mop); + + if ((mop & MO_SIGN) && size != MO_64) { + tcg_gen_ext32u_i64(tcg_rt, tcg_rt); + } } /* -- 2.20.1 From: Jamie Iles <jamie@nuviainc.com> The DAIF and PAC checks used raise_exception_ra to raise an exception and unwind CPU state but raise_exception_ra is currently designed for handling data aborts as the syndrome is partially precomputed and encoded in the TB and then merged in merge_syn_data_abort when handling the data abort. Using raise_exception_ra for DAIF and PAC checks results in an empty syndrome being retrieved from data[2] in restore_state_to_opc and setting ESR to 0. This manifested as: kvm [571]: Unknown exception class: esr: 0x000000 – Unknown/Uncategorized when launching a KVM guest when the host qemu used a CPU supporting EL2+pointer authentication and enabling pointer authentication in the guest. Rework raise_exception_ra such that the state is restored before raising the exception so that the exception is not clobbered by restore_state_to_opc. Fixes: 0d43e1a2d29a ("target/arm: Add PAuth helpers") Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <jamie@nuviainc.com> [PMM: added comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/op_helper.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void raise_exception(CPUARMState *env, uint32_t excp, void raise_exception_ra(CPUARMState *env, uint32_t excp, uint32_t syndrome, uint32_t target_el, uintptr_t ra) { - CPUState *cs = do_raise_exception(env, excp, syndrome, target_el); - cpu_loop_exit_restore(cs, ra); + CPUState *cs = env_cpu(env); + + /* + * restore_state_to_opc() will set env->exception.syndrome, so + * we must restore CPU state here before setting the syndrome + * the caller passed us, and cannot use cpu_loop_exit_restore(). + */ + cpu_restore_state(cs, ra, true); + raise_exception(env, excp, syndrome, target_el); } uint64_t HELPER(neon_tbl)(CPUARMState *env, uint32_t desc, -- 2.20.1 From: Jamie Iles <jamie@nuviainc.com> Now that there are no other users of do_raise_exception, fold it into raise_exception. Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/op_helper.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ #define SIGNBIT (uint32_t)0x80000000 #define SIGNBIT64 ((uint64_t)1 << 63) -static CPUState *do_raise_exception(CPUARMState *env, uint32_t excp, - uint32_t syndrome, uint32_t target_el) +void raise_exception(CPUARMState *env, uint32_t excp, + uint32_t syndrome, uint32_t target_el) { CPUState *cs = env_cpu(env); @@ -XXX,XX +XXX,XX @@ static CPUState *do_raise_exception(CPUARMState *env, uint32_t excp, cs->exception_index = excp; env->exception.syndrome = syndrome; env->exception.target_el = target_el; - - return cs; -} - -void raise_exception(CPUARMState *env, uint32_t excp, - uint32_t syndrome, uint32_t target_el) -{ - CPUState *cs = do_raise_exception(env, excp, syndrome, target_el); cpu_loop_exit(cs); } -- 2.20.1 From: Jamie Iles <jamie@nuviainc.com> Now that raise_exception_ra restores the state before raising the exception we can use restore_exception_ra to perform the state restore + exception raising without clobbering the syndrome. Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <jamie@nuviainc.com> [PMM: Keep the one line of the comment that is still relevant] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc, switch (tcf) { case 1: - /* - * Tag check fail causes a synchronous exception. - * - * In restore_state_to_opc, we set the exception syndrome - * for the load or store operation. Unwind first so we - * may overwrite that with the syndrome for the tag check. - */ - cpu_restore_state(env_cpu(env), ra, true); + /* Tag check fail causes a synchronous exception. */ env->exception.vaddress = dirty_ptr; is_write = FIELD_EX32(desc, MTEDESC, WRITE); syn = syn_data_abort_no_iss(arm_current_el(env) != 0, 0, 0, 0, 0, is_write, 0x11); - raise_exception(env, EXCP_DATA_ABORT, syn, exception_target_el(env)); + raise_exception_ra(env, EXCP_DATA_ABORT, syn, + exception_target_el(env), ra); /* noreturn, but fall through to the assert anyway */ case 0: -- 2.20.1 From: Jamie Iles <jamie@nuviainc.com> The sequence cpu_restore_state() + raise_exception() is equivalent to raise_exception_ra(), so use that instead. (In this case we never cared about the syndrome value, because M-profile doesn't use the syndrome; the old code was just written unnecessarily awkwardly.) Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <jamie@nuviainc.com> [PMM: Retain edited version of comment; rewrite commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 5 +---- target/arm/op_helper.c | 9 +++------ 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) limit = is_psp ? env->v7m.psplim[false] : env->v7m.msplim[false]; if (val < limit) { - CPUState *cs = env_cpu(env); - - cpu_restore_state(cs, GETPC(), true); - raise_exception(env, EXCP_STKOF, 0, 1); + raise_exception_ra(env, EXCP_STKOF, 0, 1, GETPC()); } if (is_psp) { diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v8m_stackcheck)(CPUARMState *env, uint32_t newvalue) * raising an exception if the limit is breached. */ if (newvalue < v7m_sp_limit(env)) { - CPUState *cs = env_cpu(env); - /* * Stack limit exceptions are a rare case, so rather than syncing - * PC/condbits before the call, we use cpu_restore_state() to - * get them right before raising the exception. + * PC/condbits before the call, we use raise_exception_ra() so + * that cpu_restore_state() will sort them out. */ - cpu_restore_state(cs, GETPC(), true); - raise_exception(env, EXCP_STKOF, 0, 1); + raise_exception_ra(env, EXCP_STKOF, 0, 1, GETPC()); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Note that the SVE BFLOAT16 support does not require SVE2, it is an independent extension. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_predinv(const ARMISARegisters *id) return FIELD_EX32(id->id_isar6, ID_ISAR6, SPECRES) != 0; } +static inline bool isar_feature_aa32_bf16(const ARMISARegisters *id) +{ + return FIELD_EX32(id->id_isar6, ID_ISAR6, BF16) != 0; +} + static inline bool isar_feature_aa32_i8mm(const ARMISARegisters *id) { return FIELD_EX32(id->id_isar6, ID_ISAR6, I8MM) != 0; @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_dcpodp(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, DPB) >= 2; } +static inline bool isar_feature_aa64_bf16(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, BF16) != 0; +} + static inline bool isar_feature_aa64_fp_simd(const ARMISARegisters *id) { /* We always set the AdvSIMD and FP fields identically. */ @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_sve2_bitperm(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, BITPERM) != 0; } +static inline bool isar_feature_aa64_sve_bf16(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, BFLOAT16) != 0; +} + static inline bool isar_feature_aa64_sve2_sha3(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, SHA3) != 0; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) int rd = extract32(insn, 0, 5); if (mos) { - unallocated_encoding(s); - return; + goto do_unallocated; } switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) /* FCVT between half, single and double precision */ int dtype = extract32(opcode, 0, 2); if (type == 2 || dtype == type) { - unallocated_encoding(s); - return; + goto do_unallocated; } if (!fp_access_check(s)) { return; @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) case 0x10 ... 0x13: /* FRINT{32,64}{X,Z} */ if (type > 1 || !dc_isar_feature(aa64_frint, s)) { - unallocated_encoding(s); - return; + goto do_unallocated; } /* fall through */ case 0x0 ... 0x3: @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) break; case 3: if (!dc_isar_feature(aa64_fp16, s)) { - unallocated_encoding(s); - return; + goto do_unallocated; } if (!fp_access_check(s)) { @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) handle_fp_1src_half(s, opcode, rd, rn); break; default: - unallocated_encoding(s); + goto do_unallocated; } break; default: + do_unallocated: unallocated_encoding(s); break; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the 64-bit BFCVT and the 32-bit VCVT{B,T}.BF16.F32. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/vfp.decode | 2 ++ target/arm/translate-a64.c | 19 +++++++++++++++++++ target/arm/translate-vfp.c | 24 ++++++++++++++++++++++++ target/arm/vfp_helper.c | 5 +++++ 5 files changed, 51 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_cmped, void, f64, f64, env) DEF_HELPER_2(vfp_fcvtds, f64, f32, env) DEF_HELPER_2(vfp_fcvtsd, f32, f64, env) +DEF_HELPER_FLAGS_2(bfcvt, TCG_CALL_NO_RWG, i32, f32, ptr) DEF_HELPER_2(vfp_uitoh, f16, i32, ptr) DEF_HELPER_2(vfp_uitos, f32, i32, ptr) diff --git a/target/arm/vfp.decode b/target/arm/vfp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp.decode +++ b/target/arm/vfp.decode @@ -XXX,XX +XXX,XX @@ VCVT_f64_f16 ---- 1110 1.11 0010 .... 1011 t:1 1.0 .... \ # VCVTB and VCVTT to f16: Vd format is always vd_sp; # Vm format depends on size bit +VCVT_b16_f32 ---- 1110 1.11 0011 .... 1001 t:1 1.0 .... \ + vd=%vd_sp vm=%vm_sp VCVT_f16_f32 ---- 1110 1.11 0011 .... 1010 t:1 1.0 .... \ vd=%vd_sp vm=%vm_sp VCVT_f16_f64 ---- 1110 1.11 0011 .... 1011 t:1 1.0 .... \ diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) case 0x3: /* FSQRT */ gen_helper_vfp_sqrts(tcg_res, tcg_op, cpu_env); goto done; + case 0x6: /* BFCVT */ + gen_fpst = gen_helper_bfcvt; + break; case 0x8: /* FRINTN */ case 0x9: /* FRINTP */ case 0xa: /* FRINTM */ @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) } break; + case 0x6: + switch (type) { + case 1: /* BFCVT */ + if (!dc_isar_feature(aa64_bf16, s)) { + goto do_unallocated; + } + if (!fp_access_check(s)) { + return; + } + handle_fp_1src_single(s, opcode, rd, rn); + break; + default: + goto do_unallocated; + } + break; + default: do_unallocated: unallocated_encoding(s); diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f64_f16(DisasContext *s, arg_VCVT_f64_f16 *a) return true; } +static bool trans_VCVT_b16_f32(DisasContext *s, arg_VCVT_b16_f32 *a) +{ + TCGv_ptr fpst; + TCGv_i32 tmp; + + if (!dc_isar_feature(aa32_bf16, s)) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = fpstatus_ptr(FPST_FPCR); + tmp = tcg_temp_new_i32(); + + vfp_load_reg32(tmp, a->vm); + gen_helper_bfcvt(tmp, tmp, fpst); + tcg_gen_st16_i32(tmp, cpu_env, vfp_f16_offset(a->vd, a->t)); + tcg_temp_free_ptr(fpst); + tcg_temp_free_i32(tmp); + return true; +} + static bool trans_VCVT_f16_f32(DisasContext *s, arg_VCVT_f16_f32 *a) { TCGv_ptr fpst; diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ float32 VFP_HELPER(fcvts, d)(float64 x, CPUARMState *env) return float64_to_float32(x, &env->vfp.fp_status); } +uint32_t HELPER(bfcvt)(float32 x, void *status) +{ + return float32_to_bfloat16(x, status); +} + /* * VFP3 fixed point conversion. The AArch32 versions of fix-to-float * must always round-to-nearest; the AArch64 ones honour the FPSCR -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is BFCVT{N,T} for both AArch64 AdvSIMD and SVE, and VCVT.BF16.F32 for AArch32 NEON. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 4 ++++ target/arm/helper.h | 1 + target/arm/neon-dp.decode | 1 + target/arm/sve.decode | 2 ++ target/arm/sve_helper.c | 2 ++ target/arm/translate-a64.c | 17 ++++++++++++++ target/arm/translate-neon.c | 45 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 16 +++++++++++++ target/arm/vfp_helper.c | 7 ++++++ 9 files changed, 95 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_fcvt_hd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_fcvt_sd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_bfcvt, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_fcvtzs_hh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve2_fcvtnt_sh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve2_fcvtnt_ds, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_bfcvtnt, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve2_fcvtlt_hs, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_cmped, void, f64, f64, env) DEF_HELPER_2(vfp_fcvtds, f64, f32, env) DEF_HELPER_2(vfp_fcvtsd, f32, f64, env) DEF_HELPER_FLAGS_2(bfcvt, TCG_CALL_NO_RWG, i32, f32, ptr) +DEF_HELPER_FLAGS_2(bfcvt_pair, TCG_CALL_NO_RWG, i32, i64, ptr) DEF_HELPER_2(vfp_uitoh, f16, i32, ptr) DEF_HELPER_2(vfp_uitos, f32, i32, ptr) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VRINTZ 1111 001 11 . 11 .. 10 .... 0 1011 . . 0 .... @2misc VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 + VCVT_B16_F32 1111 001 11 . 11 .. 10 .... 0 1100 1 . 0 .... @2misc_q0 VRINTM 1111 001 11 . 11 .. 10 .... 0 1101 . . 0 .... @2misc diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FNMLS_zpzzz 01100101 .. 1 ..... 111 ... ..... ..... @rdn_pg_rm_ra # SVE floating-point convert precision FCVT_sh 01100101 10 0010 00 101 ... ..... ..... @rd_pg_rn_e0 FCVT_hs 01100101 10 0010 01 101 ... ..... ..... @rd_pg_rn_e0 +BFCVT 01100101 10 0010 10 101 ... ..... ..... @rd_pg_rn_e0 FCVT_dh 01100101 11 0010 00 101 ... ..... ..... @rd_pg_rn_e0 FCVT_hd 01100101 11 0010 01 101 ... ..... ..... @rd_pg_rn_e0 FCVT_ds 01100101 11 0010 10 101 ... ..... ..... @rd_pg_rn_e0 @@ -XXX,XX +XXX,XX @@ RAX1 01000101 00 1 ..... 11110 1 ..... ..... @rd_rn_rm_e0 FCVTXNT_ds 01100100 00 0010 10 101 ... ..... ..... @rd_pg_rn_e0 FCVTX_ds 01100101 00 0010 10 101 ... ..... ..... @rd_pg_rn_e0 FCVTNT_sh 01100100 10 0010 00 101 ... ..... ..... @rd_pg_rn_e0 +BFCVTNT 01100100 10 0010 10 101 ... ..... ..... @rd_pg_rn_e0 FCVTLT_hs 01100100 10 0010 01 101 ... ..... ..... @rd_pg_rn_e0 FCVTNT_ds 01100100 11 0010 10 101 ... ..... ..... @rd_pg_rn_e0 FCVTLT_sd 01100100 11 0010 11 101 ... ..... ..... @rd_pg_rn_e0 diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t vfp_float64_to_uint64_rtz(float64 f, float_status *s) DO_ZPZ_FP(sve_fcvt_sh, uint32_t, H1_4, sve_f32_to_f16) DO_ZPZ_FP(sve_fcvt_hs, uint32_t, H1_4, sve_f16_to_f32) +DO_ZPZ_FP(sve_bfcvt, uint32_t, H1_4, float32_to_bfloat16) DO_ZPZ_FP(sve_fcvt_dh, uint64_t, , sve_f64_to_f16) DO_ZPZ_FP(sve_fcvt_hd, uint64_t, , sve_f16_to_f64) DO_ZPZ_FP(sve_fcvt_ds, uint64_t, , float64_to_float32) @@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vg, void *status, uint32_t desc) \ } while (i != 0); \ } +DO_FCVTNT(sve_bfcvtnt, uint32_t, uint16_t, H1_4, H1_2, float32_to_bfloat16) DO_FCVTNT(sve2_fcvtnt_sh, uint32_t, uint16_t, H1_4, H1_2, sve_f32_to_f16) DO_FCVTNT(sve2_fcvtnt_ds, uint64_t, uint32_t, , H1_4, float64_to_float32) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_2misc_narrow(DisasContext *s, bool scalar, tcg_temp_free_i32(ahp); } break; + case 0x36: /* BFCVTN, BFCVTN2 */ + { + TCGv_ptr fpst = fpstatus_ptr(FPST_FPCR); + gen_helper_bfcvt_pair(tcg_res[pass], tcg_op, fpst); + tcg_temp_free_ptr(fpst); + } + break; case 0x56: /* FCVTXN, FCVTXN2 */ /* 64 bit to 32 bit float conversion * with von Neumann rounding (round to odd) @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) } handle_2misc_narrow(s, false, opcode, 0, is_q, size - 1, rn, rd); return; + case 0x36: /* BFCVTN, BFCVTN2 */ + if (!dc_isar_feature(aa64_bf16, s) || size != 2) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + handle_2misc_narrow(s, false, opcode, 0, is_q, size - 1, rn, rd); + return; case 0x17: /* FCVTL, FCVTL2 */ if (!fp_access_check(s)) { return; diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL(DisasContext *s, arg_2misc *a) return true; } +static bool trans_VCVT_B16_F32(DisasContext *s, arg_2misc *a) +{ + TCGv_ptr fpst; + TCGv_i64 tmp; + TCGv_i32 dst0, dst1; + + if (!dc_isar_feature(aa32_bf16, s)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm & 1) || (a->size != 1)) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = fpstatus_ptr(FPST_STD); + tmp = tcg_temp_new_i64(); + dst0 = tcg_temp_new_i32(); + dst1 = tcg_temp_new_i32(); + + read_neon_element64(tmp, a->vm, 0, MO_64); + gen_helper_bfcvt_pair(dst0, tmp, fpst); + + read_neon_element64(tmp, a->vm, 1, MO_64); + gen_helper_bfcvt_pair(dst1, tmp, fpst); + + write_neon_element32(dst0, a->vd, 0, MO_32); + write_neon_element32(dst1, a->vd, 1, MO_32); + + tcg_temp_free_i64(tmp); + tcg_temp_free_i32(dst0); + tcg_temp_free_i32(dst1); + tcg_temp_free_ptr(fpst); + return true; +} + static bool trans_VCVT_F16_F32(DisasContext *s, arg_2misc *a) { TCGv_ptr fpst; diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a) return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_hs); } +static bool trans_BFCVT(DisasContext *s, arg_rpr_esz *a) +{ + if (!dc_isar_feature(aa64_sve_bf16, s)) { + return false; + } + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_bfcvt); +} + static bool trans_FCVT_dh(DisasContext *s, arg_rpr_esz *a) { return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_dh); @@ -XXX,XX +XXX,XX @@ static bool trans_FCVTNT_sh(DisasContext *s, arg_rpr_esz *a) return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve2_fcvtnt_sh); } +static bool trans_BFCVTNT(DisasContext *s, arg_rpr_esz *a) +{ + if (!dc_isar_feature(aa64_sve_bf16, s)) { + return false; + } + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_bfcvtnt); +} + static bool trans_FCVTNT_ds(DisasContext *s, arg_rpr_esz *a) { if (!dc_isar_feature(aa64_sve2, s)) { diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(bfcvt)(float32 x, void *status) return float32_to_bfloat16(x, status); } +uint32_t HELPER(bfcvt_pair)(uint64_t pair, void *status) +{ + bfloat16 lo = float32_to_bfloat16(extract64(pair, 0, 32), status); + bfloat16 hi = float32_to_bfloat16(extract64(pair, 32, 32), status); + return deposit32(lo, 16, 16, hi); +} + /* * VFP3 fixed point conversion. The AArch32 versions of fix-to-float * must always round-to-nearest; the AArch64 ones honour the FPSCR -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> For Arm BFDOT and BFMMLA, we need a version of round-to-odd that overflows to infinity, instead of the max normal number. Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/fpu/softfloat-types.h | 4 +++- fpu/softfloat-parts.c.inc | 6 ++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_round_up = 2, float_round_to_zero = 3, float_round_ties_away = 4, - /* Not an IEEE rounding mode: round to the closest odd mantissa value */ + /* Not an IEEE rounding mode: round to closest odd, overflow to max */ float_round_to_odd = 5, + /* Not an IEEE rounding mode: round to closest odd, overflow to inf */ + float_round_to_odd_inf = 6, } FloatRoundMode; /* diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(uncanon)(FloatPartsN *p, float_status *s, g_assert_not_reached(); } + overflow_norm = false; switch (s->float_rounding_mode) { case float_round_nearest_even: - overflow_norm = false; inc = ((p->frac_lo & roundeven_mask) != frac_lsbm1 ? frac_lsbm1 : 0); break; case float_round_ties_away: - overflow_norm = false; inc = frac_lsbm1; break; case float_round_to_zero: @@ -XXX,XX +XXX,XX @@ static void partsN(uncanon)(FloatPartsN *p, float_status *s, break; case float_round_to_odd: overflow_norm = true; + /* fall through */ + case float_round_to_odd_inf: inc = p->frac_lo & frac_lsb ? 0 : round_mask; break; default: @@ -XXX,XX +XXX,XX @@ static void partsN(uncanon)(FloatPartsN *p, float_status *s, ? frac_lsbm1 : 0); break; case float_round_to_odd: + case float_round_to_odd_inf: inc = p->frac_lo & frac_lsb ? 0 : round_mask; break; default: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is BFDOT for both AArch64 AdvSIMD and SVE, and VDOT.BF16 for AArch32 NEON. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 3 +++ target/arm/neon-shared.decode | 2 ++ target/arm/sve.decode | 3 +++ target/arm/translate-a64.c | 20 ++++++++++++++++++ target/arm/translate-neon.c | 9 ++++++++ target/arm/translate-sve.c | 12 +++++++++++ target/arm/vec_helper.c | 40 +++++++++++++++++++++++++++++++++++ 7 files changed, 89 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_ummla_b, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_usmmla_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_bfdot, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/neon-shared.decode b/target/arm/neon-shared.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-shared.decode +++ b/target/arm/neon-shared.decode @@ -XXX,XX +XXX,XX @@ VUDOT 1111 110 00 . 10 .... .... 1101 . q:1 . 1 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp VUSDOT 1111 110 01 . 10 .... .... 1101 . q:1 . 0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp +VDOT_b16 1111 110 00 . 00 .... .... 1101 . q:1 . 0 .... \ + vm=%vm_dp vn=%vn_dp vd=%vd_dp # VFM[AS]L VFML 1111 110 0 s:1 . 10 .... .... 1000 . 0 . 1 .... \ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FMLALT_zzzw 01100100 10 1 ..... 10 0 00 1 ..... ..... @rda_rn_rm_e0 FMLSLB_zzzw 01100100 10 1 ..... 10 1 00 0 ..... ..... @rda_rn_rm_e0 FMLSLT_zzzw 01100100 10 1 ..... 10 1 00 1 ..... ..... @rda_rn_rm_e0 +### SVE2 floating-point bfloat16 dot-product +BFDOT_zzzz 01100100 01 1 ..... 10 0 00 0 ..... ..... @rda_rn_rm_e0 + ### SVE2 floating-point multiply-add long (indexed) FMLALB_zzxw 01100100 10 1 ..... 0100.0 ..... ..... @rrxr_3a esz=2 FMLALT_zzxw 01100100 10 1 ..... 0100.1 ..... ..... @rrxr_3a esz=2 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = dc_isar_feature(aa64_fcma, s); break; + case 0x1f: /* BFDOT */ + switch (size) { + case 1: + feature = dc_isar_feature(aa64_bf16, s); + break; + default: + unallocated_encoding(s); + return; + } + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0xf: /* BFDOT */ + switch (size) { + case 1: + gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, 0, gen_helper_gvec_bfdot); + break; + default: + g_assert_not_reached(); + } + return; + default: g_assert_not_reached(); } diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ static bool trans_VUSDOT(DisasContext *s, arg_VUSDOT *a) gen_helper_gvec_usdot_b); } +static bool trans_VDOT_b16(DisasContext *s, arg_VDOT_b16 *a) +{ + if (!dc_isar_feature(aa32_bf16, s)) { + return false; + } + return do_neon_ddda(s, a->q * 7, a->vd, a->vn, a->vm, 0, + gen_helper_gvec_bfdot); +} + static bool trans_VFML(DisasContext *s, arg_VFML *a) { int opr_sz; diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_UMMLA(DisasContext *s, arg_rrrr_esz *a) { return do_i8mm_zzzz_ool(s, a, gen_helper_gvec_ummla_b, 0); } + +static bool trans_BFDOT_zzzz(DisasContext *s, arg_rrrr_esz *a) +{ + if (!dc_isar_feature(aa64_sve_bf16, s)) { + return false; + } + if (sve_access_check(s)) { + gen_gvec_ool_zzzz(s, gen_helper_gvec_bfdot, + a->rd, a->rn, a->rm, a->ra, 0); + } + return true; +} diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ static void do_mmla_b(void *vd, void *vn, void *vm, void *va, uint32_t desc, DO_MMLA_B(gvec_smmla_b, do_smmla_b) DO_MMLA_B(gvec_ummla_b, do_ummla_b) DO_MMLA_B(gvec_usmmla_b, do_usmmla_b) + +/* + * BFloat16 Dot Product + */ + +static float32 bfdotadd(float32 sum, uint32_t e1, uint32_t e2) +{ + /* FPCR is ignored for BFDOT and BFMMLA. */ + float_status bf_status = { + .tininess_before_rounding = float_tininess_before_rounding, + .float_rounding_mode = float_round_to_odd_inf, + .flush_to_zero = true, + .flush_inputs_to_zero = true, + .default_nan_mode = true, + }; + float32 t1, t2; + + /* + * Extract each BFloat16 from the element pair, and shift + * them such that they become float32. + */ + t1 = float32_mul(e1 << 16, e2 << 16, &bf_status); + t2 = float32_mul(e1 & 0xffff0000u, e2 & 0xffff0000u, &bf_status); + t1 = float32_add(t1, t2, &bf_status); + t1 = float32_add(sum, t1, &bf_status); + + return t1; +} + +void HELPER(gvec_bfdot)(void *vd, void *vn, void *vm, void *va, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + float32 *d = vd, *a = va; + uint32_t *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = bfdotadd(a[i], n[i], m[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is BFDOT for both AArch64 AdvSIMD and SVE, and VDOT.BF16 for AArch32 NEON. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 ++ target/arm/neon-shared.decode | 2 ++ target/arm/sve.decode | 3 +++ target/arm/translate-a64.c | 41 +++++++++++++++++++++++++++-------- target/arm/translate-neon.c | 9 ++++++++ target/arm/translate-sve.c | 12 ++++++++++ target/arm/vec_helper.c | 20 +++++++++++++++++ 7 files changed, 80 insertions(+), 9 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_usmmla_b, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_bfdot, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_bfdot_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) #ifdef TARGET_AARCH64 #include "helper-a64.h" diff --git a/target/arm/neon-shared.decode b/target/arm/neon-shared.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-shared.decode +++ b/target/arm/neon-shared.decode @@ -XXX,XX +XXX,XX @@ VUSDOT_scalar 1111 1110 1 . 00 .... .... 1101 . q:1 index:1 0 vm:4 \ vn=%vn_dp vd=%vd_dp VSUDOT_scalar 1111 1110 1 . 00 .... .... 1101 . q:1 index:1 1 vm:4 \ vn=%vn_dp vd=%vd_dp +VDOT_b16_scal 1111 1110 0 . 00 .... .... 1101 . q:1 index:1 0 vm:4 \ + vn=%vn_dp vd=%vd_dp %vfml_scalar_q0_rm 0:3 5:1 %vfml_scalar_q1_index 5:1 3:1 diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FMLALB_zzxw 01100100 10 1 ..... 0100.0 ..... ..... @rrxr_3a esz=2 FMLALT_zzxw 01100100 10 1 ..... 0100.1 ..... ..... @rrxr_3a esz=2 FMLSLB_zzxw 01100100 10 1 ..... 0110.0 ..... ..... @rrxr_3a esz=2 FMLSLT_zzxw 01100100 10 1 ..... 0110.1 ..... ..... @rrxr_3a esz=2 + +### SVE2 floating-point bfloat16 dot-product (indexed) +BFDOT_zzxz 01100100 01 1 ..... 010000 ..... ..... @rrxr_2 esz=2 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; - case 0x0f: /* SUDOT, USDOT */ - if (is_scalar || (size & 1) || !dc_isar_feature(aa64_i8mm, s)) { + case 0x0f: + switch (size) { + case 0: /* SUDOT */ + case 2: /* USDOT */ + if (is_scalar || !dc_isar_feature(aa64_i8mm, s)) { + unallocated_encoding(s); + return; + } + break; + case 1: /* BFDOT */ + if (is_scalar || !dc_isar_feature(aa64_bf16, s)) { + unallocated_encoding(s); + return; + } + break; + default: unallocated_encoding(s); return; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) u ? gen_helper_gvec_udot_idx_b : gen_helper_gvec_sdot_idx_b); return; - case 0x0f: /* SUDOT, USDOT */ - gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, index, - extract32(insn, 23, 1) - ? gen_helper_gvec_usdot_idx_b - : gen_helper_gvec_sudot_idx_b); - return; - + case 0x0f: + switch (extract32(insn, 22, 2)) { + case 0: /* SUDOT */ + gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, index, + gen_helper_gvec_sudot_idx_b); + return; + case 1: /* BFDOT */ + gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, index, + gen_helper_gvec_bfdot_idx); + return; + case 2: /* USDOT */ + gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, index, + gen_helper_gvec_usdot_idx_b); + return; + } + g_assert_not_reached(); case 0x11: /* FCMLA #0 */ case 0x13: /* FCMLA #90 */ case 0x15: /* FCMLA #180 */ diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSUDOT_scalar(DisasContext *s, arg_VSUDOT_scalar *a) gen_helper_gvec_sudot_idx_b); } +static bool trans_VDOT_b16_scal(DisasContext *s, arg_VDOT_b16_scal *a) +{ + if (!dc_isar_feature(aa32_bf16, s)) { + return false; + } + return do_neon_ddda(s, a->q * 6, a->vd, a->vn, a->vm, a->index, + gen_helper_gvec_bfdot_idx); +} + static bool trans_VFML_scalar(DisasContext *s, arg_VFML_scalar *a) { int opr_sz; diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_BFDOT_zzzz(DisasContext *s, arg_rrrr_esz *a) } return true; } + +static bool trans_BFDOT_zzxz(DisasContext *s, arg_rrxr_esz *a) +{ + if (!dc_isar_feature(aa64_sve_bf16, s)) { + return false; + } + if (sve_access_check(s)) { + gen_gvec_ool_zzzz(s, gen_helper_gvec_bfdot_idx, + a->rd, a->rn, a->rm, a->ra, a->index); + } + return true; +} diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_bfdot)(void *vd, void *vn, void *vm, void *va, uint32_t desc) } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_bfdot_idx)(void *vd, void *vn, void *vm, + void *va, uint32_t desc) +{ + intptr_t i, j, opr_sz = simd_oprsz(desc); + intptr_t index = simd_data(desc); + intptr_t elements = opr_sz / 4; + intptr_t eltspersegment = MIN(16 / 4, elements); + float32 *d = vd, *a = va; + uint32_t *n = vn, *m = vm; + + for (i = 0; i < elements; i += eltspersegment) { + uint32_t m_idx = m[i + H4(index)]; + + for (j = i; j < i + eltspersegment; j++) { + d[j] = bfdotadd(a[j], n[j], m_idx); + } + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is BFMMLA for both AArch64 AdvSIMD and SVE, and VMMLA.BF16 for AArch32 NEON. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 3 +++ target/arm/neon-shared.decode | 2 ++ target/arm/sve.decode | 6 +++-- target/arm/translate-a64.c | 10 +++++++++ target/arm/translate-neon.c | 9 ++++++++ target/arm/translate-sve.c | 12 ++++++++++ target/arm/vec_helper.c | 42 ++++++++++++++++++++++++++++++++++- 7 files changed, 81 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_bfdot, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_bfdot_idx, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_bfmmla, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/neon-shared.decode b/target/arm/neon-shared.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-shared.decode +++ b/target/arm/neon-shared.decode @@ -XXX,XX +XXX,XX @@ VUMMLA 1111 1100 0.10 .... .... 1100 .1.1 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp VUSMMLA 1111 1100 1.10 .... .... 1100 .1.0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp +VMMLA_b16 1111 1100 0.00 .... .... 1100 .1.0 .... \ + vm=%vm_dp vn=%vn_dp vd=%vd_dp VCMLA_scalar 1111 1110 0 . rot:2 .... .... 1000 . q:1 index:1 0 vm:4 \ vn=%vn_dp vd=%vd_dp size=1 diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ SQRDCMLAH_zzzz 01000100 esz:2 0 rm:5 0011 rot:2 rn:5 rd:5 ra=%reg_movprfx USDOT_zzzz 01000100 .. 0 ..... 011 110 ..... ..... @rda_rn_rm ### SVE2 floating point matrix multiply accumulate - -FMMLA 01100100 .. 1 ..... 111001 ..... ..... @rda_rn_rm +{ + BFMMLA 01100100 01 1 ..... 111 001 ..... ..... @rda_rn_rm_e0 + FMMLA 01100100 .. 1 ..... 111 001 ..... ..... @rda_rn_rm +} ### SVE2 Memory Gather Load Group diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = dc_isar_feature(aa64_fcma, s); break; + case 0x1d: /* BFMMLA */ + if (size != MO_16 || !is_q) { + unallocated_encoding(s); + return; + } + feature = dc_isar_feature(aa64_bf16, s); + break; case 0x1f: /* BFDOT */ switch (size) { case 1: @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0xd: /* BFMMLA */ + gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, 0, gen_helper_gvec_bfmmla); + return; case 0xf: /* BFDOT */ switch (size) { case 1: diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ static bool trans_VUSMMLA(DisasContext *s, arg_VUSMMLA *a) return do_neon_ddda(s, 7, a->vd, a->vn, a->vm, 0, gen_helper_gvec_usmmla_b); } + +static bool trans_VMMLA_b16(DisasContext *s, arg_VMMLA_b16 *a) +{ + if (!dc_isar_feature(aa32_bf16, s)) { + return false; + } + return do_neon_ddda(s, 7, a->vd, a->vn, a->vm, 0, + gen_helper_gvec_bfmmla); +} diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_BFDOT_zzxz(DisasContext *s, arg_rrxr_esz *a) } return true; } + +static bool trans_BFMMLA(DisasContext *s, arg_rrrr_esz *a) +{ + if (!dc_isar_feature(aa64_sve_bf16, s)) { + return false; + } + if (sve_access_check(s)) { + gen_gvec_ool_zzzz(s, gen_helper_gvec_bfmmla, + a->rd, a->rn, a->rm, a->ra, 0); + } + return true; +} diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ static void do_mmla_b(void *vd, void *vn, void *vm, void *va, uint32_t desc, * Process the entire segment at once, writing back the * results only after we've consumed all of the inputs. * - * Key to indicies by column: + * Key to indices by column: * i j i j */ sum0 = a[H4(0 + 0)]; @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_bfdot_idx)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_bfmmla)(void *vd, void *vn, void *vm, void *va, uint32_t desc) +{ + intptr_t s, opr_sz = simd_oprsz(desc); + float32 *d = vd, *a = va; + uint32_t *n = vn, *m = vm; + + for (s = 0; s < opr_sz / 4; s += 4) { + float32 sum00, sum01, sum10, sum11; + + /* + * Process the entire segment at once, writing back the + * results only after we've consumed all of the inputs. + * + * Key to indicies by column: + * i j i k j k + */ + sum00 = a[s + H4(0 + 0)]; + sum00 = bfdotadd(sum00, n[s + H4(0 + 0)], m[s + H4(0 + 0)]); + sum00 = bfdotadd(sum00, n[s + H4(0 + 1)], m[s + H4(0 + 1)]); + + sum01 = a[s + H4(0 + 1)]; + sum01 = bfdotadd(sum01, n[s + H4(0 + 0)], m[s + H4(2 + 0)]); + sum01 = bfdotadd(sum01, n[s + H4(0 + 1)], m[s + H4(2 + 1)]); + + sum10 = a[s + H4(2 + 0)]; + sum10 = bfdotadd(sum10, n[s + H4(2 + 0)], m[s + H4(0 + 0)]); + sum10 = bfdotadd(sum10, n[s + H4(2 + 1)], m[s + H4(0 + 1)]); + + sum11 = a[s + H4(2 + 1)]; + sum11 = bfdotadd(sum11, n[s + H4(2 + 0)], m[s + H4(2 + 0)]); + sum11 = bfdotadd(sum11, n[s + H4(2 + 1)], m[s + H4(2 + 1)]); + + d[s + H4(0 + 0)] = sum00; + d[s + H4(0 + 1)] = sum01; + d[s + H4(2 + 0)] = sum10; + d[s + H4(2 + 1)] = sum11; + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE, and VFMA{B,T}.BF16 for AArch32 NEON. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 3 +++ target/arm/neon-shared.decode | 3 +++ target/arm/sve.decode | 3 +++ target/arm/translate-a64.c | 13 +++++++++---- target/arm/translate-neon.c | 9 +++++++++ target/arm/translate-sve.c | 30 ++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 16 ++++++++++++++++ 7 files changed, 73 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_bfdot_idx, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_bfmmla, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(gvec_bfmlal, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/neon-shared.decode b/target/arm/neon-shared.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-shared.decode +++ b/target/arm/neon-shared.decode @@ -XXX,XX +XXX,XX @@ VUSMMLA 1111 1100 1.10 .... .... 1100 .1.0 .... \ VMMLA_b16 1111 1100 0.00 .... .... 1100 .1.0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp +VFMA_b16 1111 110 0 0.11 .... .... 1000 . q:1 . 1 .... \ + vm=%vm_dp vn=%vn_dp vd=%vd_dp + VCMLA_scalar 1111 1110 0 . rot:2 .... .... 1000 . q:1 index:1 0 vm:4 \ vn=%vn_dp vd=%vd_dp size=1 VCMLA_scalar 1111 1110 1 . rot:2 .... .... 1000 . q:1 . 0 .... \ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FMLALT_zzzw 01100100 10 1 ..... 10 0 00 1 ..... ..... @rda_rn_rm_e0 FMLSLB_zzzw 01100100 10 1 ..... 10 1 00 0 ..... ..... @rda_rn_rm_e0 FMLSLT_zzzw 01100100 10 1 ..... 10 1 00 1 ..... ..... @rda_rn_rm_e0 +BFMLALB_zzzw 01100100 11 1 ..... 10 0 00 0 ..... ..... @rda_rn_rm_e0 +BFMLALT_zzzw 01100100 11 1 ..... 10 0 00 1 ..... ..... @rda_rn_rm_e0 + ### SVE2 floating-point bfloat16 dot-product BFDOT_zzzz 01100100 01 1 ..... 10 0 00 0 ..... ..... @rda_rn_rm_e0 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = dc_isar_feature(aa64_bf16, s); break; - case 0x1f: /* BFDOT */ + case 0x1f: switch (size) { - case 1: + case 1: /* BFDOT */ + case 3: /* BFMLAL{B,T} */ feature = dc_isar_feature(aa64_bf16, s); break; default: @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) case 0xd: /* BFMMLA */ gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, 0, gen_helper_gvec_bfmmla); return; - case 0xf: /* BFDOT */ + case 0xf: switch (size) { - case 1: + case 1: /* BFDOT */ gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, 0, gen_helper_gvec_bfdot); break; + case 3: /* BFMLAL{B,T} */ + gen_gvec_op4_fpst(s, 1, rd, rn, rm, rd, false, is_q, + gen_helper_gvec_bfmlal); + break; default: g_assert_not_reached(); } diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMMLA_b16(DisasContext *s, arg_VMMLA_b16 *a) return do_neon_ddda(s, 7, a->vd, a->vn, a->vm, 0, gen_helper_gvec_bfmmla); } + +static bool trans_VFMA_b16(DisasContext *s, arg_VFMA_b16 *a) +{ + if (!dc_isar_feature(aa32_bf16, s)) { + return false; + } + return do_neon_ddda_fpst(s, 7, a->vd, a->vn, a->vm, a->q, FPST_STD, + gen_helper_gvec_bfmlal); +} diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_BFMMLA(DisasContext *s, arg_rrrr_esz *a) } return true; } + +static bool do_BFMLAL_zzzw(DisasContext *s, arg_rrrr_esz *a, bool sel) +{ + if (!dc_isar_feature(aa64_sve_bf16, s)) { + return false; + } + if (sve_access_check(s)) { + TCGv_ptr status = fpstatus_ptr(FPST_FPCR); + unsigned vsz = vec_full_reg_size(s); + + tcg_gen_gvec_4_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + vec_full_reg_offset(s, a->ra), + status, vsz, vsz, sel, + gen_helper_gvec_bfmlal); + tcg_temp_free_ptr(status); + } + return true; +} + +static bool trans_BFMLALB_zzzw(DisasContext *s, arg_rrrr_esz *a) +{ + return do_BFMLAL_zzzw(s, a, false); +} + +static bool trans_BFMLALT_zzzw(DisasContext *s, arg_rrrr_esz *a) +{ + return do_BFMLAL_zzzw(s, a, true); +} diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_bfmmla)(void *vd, void *vn, void *vm, void *va, uint32_t desc) } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_bfmlal)(void *vd, void *vn, void *vm, void *va, + void *stat, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + intptr_t sel = simd_data(desc); + float32 *d = vd, *a = va; + bfloat16 *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 4; ++i) { + float32 nn = n[H2(i * 2 + sel)] << 16; + float32 mm = m[H2(i * 2 + sel)] << 16; + d[H4(i)] = float32_muladd(nn, mm, a[H4(i)], 0, stat); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE, and VFMA{B,T}.BF16 for AArch32 NEON. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 ++ target/arm/neon-shared.decode | 2 ++ target/arm/sve.decode | 2 ++ target/arm/translate-a64.c | 15 ++++++++++++++- target/arm/translate-neon.c | 10 ++++++++++ target/arm/translate-sve.c | 30 ++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 22 ++++++++++++++++++++++ 7 files changed, 82 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_bfmmla, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_6(gvec_bfmlal, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(gvec_bfmlal_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) #ifdef TARGET_AARCH64 #include "helper-a64.h" diff --git a/target/arm/neon-shared.decode b/target/arm/neon-shared.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-shared.decode +++ b/target/arm/neon-shared.decode @@ -XXX,XX +XXX,XX @@ VFML_scalar 1111 1110 0 . 0 s:1 .... .... 1000 . 0 . 1 index:1 ... \ rm=%vfml_scalar_q0_rm vn=%vn_sp vd=%vd_dp q=0 VFML_scalar 1111 1110 0 . 0 s:1 .... .... 1000 . 1 . 1 . rm:3 \ index=%vfml_scalar_q1_index vn=%vn_dp vd=%vd_dp q=1 +VFMA_b16_scal 1111 1110 0.11 .... .... 1000 . q:1 . 1 . vm:3 \ + index=%vfml_scalar_q1_index vn=%vn_dp vd=%vd_dp diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FMLALB_zzxw 01100100 10 1 ..... 0100.0 ..... ..... @rrxr_3a esz=2 FMLALT_zzxw 01100100 10 1 ..... 0100.1 ..... ..... @rrxr_3a esz=2 FMLSLB_zzxw 01100100 10 1 ..... 0110.0 ..... ..... @rrxr_3a esz=2 FMLSLT_zzxw 01100100 10 1 ..... 0110.1 ..... ..... @rrxr_3a esz=2 +BFMLALB_zzxw 01100100 11 1 ..... 0100.0 ..... ..... @rrxr_3a esz=2 +BFMLALT_zzxw 01100100 11 1 ..... 0100.1 ..... ..... @rrxr_3a esz=2 ### SVE2 floating-point bfloat16 dot-product (indexed) BFDOT_zzxz 01100100 01 1 ..... 010000 ..... ..... @rrxr_2 esz=2 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } + size = MO_32; break; case 1: /* BFDOT */ if (is_scalar || !dc_isar_feature(aa64_bf16, s)) { unallocated_encoding(s); return; } + size = MO_32; + break; + case 3: /* BFMLAL{B,T} */ + if (is_scalar || !dc_isar_feature(aa64_bf16, s)) { + unallocated_encoding(s); + return; + } + /* can't set is_fp without other incorrect size checks */ + size = MO_16; break; default: unallocated_encoding(s); return; } - size = MO_32; break; case 0x11: /* FCMLA #0 */ case 0x13: /* FCMLA #90 */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) gen_gvec_op4_ool(s, is_q, rd, rn, rm, rd, index, gen_helper_gvec_usdot_idx_b); return; + case 3: /* BFMLAL{B,T} */ + gen_gvec_op4_fpst(s, 1, rd, rn, rm, rd, 0, (index << 1) | is_q, + gen_helper_gvec_bfmlal_idx); + return; } g_assert_not_reached(); case 0x11: /* FCMLA #0 */ diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ static bool trans_VFMA_b16(DisasContext *s, arg_VFMA_b16 *a) return do_neon_ddda_fpst(s, 7, a->vd, a->vn, a->vm, a->q, FPST_STD, gen_helper_gvec_bfmlal); } + +static bool trans_VFMA_b16_scal(DisasContext *s, arg_VFMA_b16_scal *a) +{ + if (!dc_isar_feature(aa32_bf16, s)) { + return false; + } + return do_neon_ddda_fpst(s, 6, a->vd, a->vn, a->vm, + (a->index << 1) | a->q, FPST_STD, + gen_helper_gvec_bfmlal_idx); +} diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_BFMLALT_zzzw(DisasContext *s, arg_rrrr_esz *a) { return do_BFMLAL_zzzw(s, a, true); } + +static bool do_BFMLAL_zzxw(DisasContext *s, arg_rrxr_esz *a, bool sel) +{ + if (!dc_isar_feature(aa64_sve_bf16, s)) { + return false; + } + if (sve_access_check(s)) { + TCGv_ptr status = fpstatus_ptr(FPST_FPCR); + unsigned vsz = vec_full_reg_size(s); + + tcg_gen_gvec_4_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + vec_full_reg_offset(s, a->ra), + status, vsz, vsz, (a->index << 1) | sel, + gen_helper_gvec_bfmlal_idx); + tcg_temp_free_ptr(status); + } + return true; +} + +static bool trans_BFMLALB_zzxw(DisasContext *s, arg_rrxr_esz *a) +{ + return do_BFMLAL_zzxw(s, a, false); +} + +static bool trans_BFMLALT_zzxw(DisasContext *s, arg_rrxr_esz *a) +{ + return do_BFMLAL_zzxw(s, a, true); +} diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_bfmlal)(void *vd, void *vn, void *vm, void *va, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_bfmlal_idx)(void *vd, void *vn, void *vm, + void *va, void *stat, uint32_t desc) +{ + intptr_t i, j, opr_sz = simd_oprsz(desc); + intptr_t sel = extract32(desc, SIMD_DATA_SHIFT, 1); + intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 1, 3); + intptr_t elements = opr_sz / 4; + intptr_t eltspersegment = MIN(16 / 4, elements); + float32 *d = vd, *a = va; + bfloat16 *n = vn, *m = vm; + + for (i = 0; i < elements; i += eltspersegment) { + float32 m_idx = m[H2(2 * i + index)] << 16; + + for (j = i; j < i + eltspersegment; j++) { + float32 n_j = n[H2(2 * j + sel)] << 16; + d[H4(j)] = float32_muladd(n_j, m_idx, a[H4(j)], 0, stat); + } + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap2(void) GET_FEATURE_ID(aa64_sve_i8mm, ARM_HWCAP2_A64_SVEI8MM); GET_FEATURE_ID(aa64_sve_f32mm, ARM_HWCAP2_A64_SVEF32MM); GET_FEATURE_ID(aa64_sve_f64mm, ARM_HWCAP2_A64_SVEF64MM); + GET_FEATURE_ID(aa64_sve_bf16, ARM_HWCAP2_A64_SVEBF16); GET_FEATURE_ID(aa64_i8mm, ARM_HWCAP2_A64_I8MM); + GET_FEATURE_ID(aa64_bf16, ARM_HWCAP2_A64_BF16); GET_FEATURE_ID(aa64_rndr, ARM_HWCAP2_A64_RNG); GET_FEATURE_ID(aa64_bti, ARM_HWCAP2_A64_BTI); GET_FEATURE_ID(aa64_mte, ARM_HWCAP2_A64_MTE); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Disable BF16 again for !have_neon and !have_vfp during realize. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210525225817.400336-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ target/arm/cpu64.c | 3 +++ target/arm/cpu_tcg.c | 1 + 3 files changed, 7 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) u = cpu->isar.id_isar6; u = FIELD_DP32(u, ID_ISAR6, JSCVT, 0); + u = FIELD_DP32(u, ID_ISAR6, BF16, 0); cpu->isar.id_isar6 = u; u = cpu->isar.mvfr0; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) t = cpu->isar.id_aa64isar1; t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 0); + t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 0); t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 0); cpu->isar.id_aa64isar1 = t; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) u = cpu->isar.id_isar6; u = FIELD_DP32(u, ID_ISAR6, DP, 0); u = FIELD_DP32(u, ID_ISAR6, FHM, 0); + u = FIELD_DP32(u, ID_ISAR6, BF16, 0); u = FIELD_DP32(u, ID_ISAR6, I8MM, 0); cpu->isar.id_isar6 = u; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); + t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* ARMv8.4-RCPC */ t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ZFR0, SVEVER, 1); t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* PMULL */ t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); + t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) u = FIELD_DP32(u, ID_ISAR6, FHM, 1); u = FIELD_DP32(u, ID_ISAR6, SB, 1); u = FIELD_DP32(u, ID_ISAR6, SPECRES, 1); + u = FIELD_DP32(u, ID_ISAR6, BF16, 1); u = FIELD_DP32(u, ID_ISAR6, I8MM, 1); cpu->isar.id_isar6 = u; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = FIELD_DP32(t, ID_ISAR6, FHM, 1); t = FIELD_DP32(t, ID_ISAR6, SB, 1); t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); cpu->isar.id_isar6 = t; -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> Until now, Hypervisor.framework has only been available on x86_64 systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's start moving common code out into its own accel directory. This patch moves assert_hvf_ok() and introduces generic build infrastructure. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-2-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/hvf_int.h | 18 +++++++++++++++ accel/hvf/hvf-all.c | 47 ++++++++++++++++++++++++++++++++++++++++ target/i386/hvf/hvf.c | 33 +--------------------------- MAINTAINERS | 8 +++++++ accel/hvf/meson.build | 6 +++++ accel/meson.build | 1 + 6 files changed, 81 insertions(+), 32 deletions(-) create mode 100644 include/sysemu/hvf_int.h create mode 100644 accel/hvf/hvf-all.c create mode 100644 accel/hvf/meson.build diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU Hypervisor.framework (HVF) support + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +/* header to be included in HVF-specific code */ + +#ifndef HVF_INT_H +#define HVF_INT_H + +#include <Hypervisor/hv.h> + +void assert_hvf_ok(hv_return_t ret); + +#endif diff --git a/accel/hvf/hvf-all.c b/accel/hvf/hvf-all.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/hvf-all.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU Hypervisor.framework support + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "qemu/error-report.h" +#include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" + +void assert_hvf_ok(hv_return_t ret) +{ + if (ret == HV_SUCCESS) { + return; + } + + switch (ret) { + case HV_ERROR: + error_report("Error: HV_ERROR"); + break; + case HV_BUSY: + error_report("Error: HV_BUSY"); + break; + case HV_BAD_ARGUMENT: + error_report("Error: HV_BAD_ARGUMENT"); + break; + case HV_NO_RESOURCES: + error_report("Error: HV_NO_RESOURCES"); + break; + case HV_NO_DEVICE: + error_report("Error: HV_NO_DEVICE"); + break; + case HV_UNSUPPORTED: + error_report("Error: HV_UNSUPPORTED"); + break; + default: + error_report("Unknown Error"); + } + + abort(); +} diff --git a/target/i386/hvf/hvf.c b/target/i386/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf.c +++ b/target/i386/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" #include "sysemu/runstate.h" #include "hvf-i386.h" #include "vmcs.h" @@ -XXX,XX +XXX,XX @@ HVFState *hvf_state; -static void assert_hvf_ok(hv_return_t ret) -{ - if (ret == HV_SUCCESS) { - return; - } - - switch (ret) { - case HV_ERROR: - error_report("Error: HV_ERROR"); - break; - case HV_BUSY: - error_report("Error: HV_BUSY"); - break; - case HV_BAD_ARGUMENT: - error_report("Error: HV_BAD_ARGUMENT"); - break; - case HV_NO_RESOURCES: - error_report("Error: HV_NO_RESOURCES"); - break; - case HV_NO_DEVICE: - error_report("Error: HV_NO_DEVICE"); - break; - case HV_UNSUPPORTED: - error_report("Error: HV_UNSUPPORTED"); - break; - default: - error_report("Unknown Error"); - } - - abort(); -} - /* Memory slots */ hvf_slot *hvf_find_overlap_slot(uint64_t start, uint64_t size) { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Roman Bolshakov <r.bolshakov@yadro.com> W: https://wiki.qemu.org/Features/HVF S: Maintained F: target/i386/hvf/ + +HVF +M: Cameron Esfahani <dirty@apple.com> +M: Roman Bolshakov <r.bolshakov@yadro.com> +W: https://wiki.qemu.org/Features/HVF +S: Maintained +F: accel/hvf/ F: include/sysemu/hvf.h +F: include/sysemu/hvf_int.h WHPX CPUs M: Sunil Muthuswamy <sunilmut@microsoft.com> diff --git a/accel/hvf/meson.build b/accel/hvf/meson.build new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/meson.build @@ -XXX,XX +XXX,XX @@ +hvf_ss = ss.source_set() +hvf_ss.add(files( + 'hvf-all.c', +)) + +specific_ss.add_all(when: 'CONFIG_HVF', if_true: hvf_ss) diff --git a/accel/meson.build b/accel/meson.build index XXXXXXX..XXXXXXX 100644 --- a/accel/meson.build +++ b/accel/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(files('accel-common.c')) softmmu_ss.add(files('accel-softmmu.c')) user_ss.add(files('accel-user.c')) +subdir('hvf') subdir('qtest') subdir('kvm') subdir('tcg') -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> Until now, Hypervisor.framework has only been available on x86_64 systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's start moving common code out into its own accel directory. This patch moves the vCPU thread loop over. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-3-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- {target/i386 => accel}/hvf/hvf-accel-ops.h | 0 {target/i386 => accel}/hvf/hvf-accel-ops.c | 0 target/i386/hvf/x86hvf.c | 2 +- accel/hvf/meson.build | 1 + target/i386/hvf/meson.build | 1 - 5 files changed, 2 insertions(+), 2 deletions(-) rename {target/i386 => accel}/hvf/hvf-accel-ops.h (100%) rename {target/i386 => accel}/hvf/hvf-accel-ops.c (100%) diff --git a/target/i386/hvf/hvf-accel-ops.h b/accel/hvf/hvf-accel-ops.h similarity index 100% rename from target/i386/hvf/hvf-accel-ops.h rename to accel/hvf/hvf-accel-ops.h diff --git a/target/i386/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c similarity index 100% rename from target/i386/hvf/hvf-accel-ops.c rename to accel/hvf/hvf-accel-ops.c diff --git a/target/i386/hvf/x86hvf.c b/target/i386/hvf/x86hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86hvf.c +++ b/target/i386/hvf/x86hvf.c @@ -XXX,XX +XXX,XX @@ #include <Hypervisor/hv.h> #include <Hypervisor/hv_vmx.h> -#include "hvf-accel-ops.h" +#include "accel/hvf/hvf-accel-ops.h" void hvf_set_segment(struct CPUState *cpu, struct vmx_segment *vmx_seg, SegmentCache *qseg, bool is_tr) diff --git a/accel/hvf/meson.build b/accel/hvf/meson.build index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/meson.build +++ b/accel/hvf/meson.build @@ -XXX,XX +XXX,XX @@ hvf_ss = ss.source_set() hvf_ss.add(files( 'hvf-all.c', + 'hvf-accel-ops.c', )) specific_ss.add_all(when: 'CONFIG_HVF', if_true: hvf_ss) diff --git a/target/i386/hvf/meson.build b/target/i386/hvf/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/meson.build +++ b/target/i386/hvf/meson.build @@ -XXX,XX +XXX,XX @@ i386_softmmu_ss.add(when: [hvf, 'CONFIG_HVF'], if_true: files( 'hvf.c', - 'hvf-accel-ops.c', 'x86.c', 'x86_cpuid.c', 'x86_decode.c', -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> Until now, Hypervisor.framework has only been available on x86_64 systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's start moving common code out into its own accel directory. This patch moves CPU and memory operations over. While at it, make sure the code is consumable on non-i386 systems. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-4-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/hvf_int.h | 4 + target/i386/hvf/hvf-i386.h | 2 - target/i386/hvf/x86hvf.h | 2 - accel/hvf/hvf-accel-ops.c | 308 ++++++++++++++++++++++++++++++++++++- target/i386/hvf/hvf.c | 302 ------------------------------------ 5 files changed, 311 insertions(+), 307 deletions(-) diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ #include <Hypervisor/hv.h> +void hvf_set_phys_mem(MemoryRegionSection *, bool); void assert_hvf_ok(hv_return_t ret); +hvf_slot *hvf_find_overlap_slot(uint64_t, uint64_t); +int hvf_put_registers(CPUState *); +int hvf_get_registers(CPUState *); #endif diff --git a/target/i386/hvf/hvf-i386.h b/target/i386/hvf/hvf-i386.h index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf-i386.h +++ b/target/i386/hvf/hvf-i386.h @@ -XXX,XX +XXX,XX @@ struct HVFState { }; extern HVFState *hvf_state; -void hvf_set_phys_mem(MemoryRegionSection *, bool); void hvf_handle_io(CPUArchState *, uint16_t, void *, int, int, int); -hvf_slot *hvf_find_overlap_slot(uint64_t, uint64_t); #ifdef NEED_CPU_H /* Functions exported to host specific mode */ diff --git a/target/i386/hvf/x86hvf.h b/target/i386/hvf/x86hvf.h index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86hvf.h +++ b/target/i386/hvf/x86hvf.h @@ -XXX,XX +XXX,XX @@ #include "x86_descr.h" int hvf_process_events(CPUState *); -int hvf_put_registers(CPUState *); -int hvf_get_registers(CPUState *); bool hvf_inject_interrupts(CPUState *); void hvf_set_segment(struct CPUState *cpu, struct vmx_segment *vmx_seg, SegmentCache *qseg, bool is_tr); diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/error-report.h" #include "qemu/main-loop.h" +#include "exec/address-spaces.h" +#include "exec/exec-all.h" +#include "sysemu/cpus.h" #include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" #include "sysemu/runstate.h" -#include "target/i386/cpu.h" #include "qemu/guest-random.h" #include "hvf-accel-ops.h" +HVFState *hvf_state; + +/* Memory slots */ + +hvf_slot *hvf_find_overlap_slot(uint64_t start, uint64_t size) +{ + hvf_slot *slot; + int x; + for (x = 0; x < hvf_state->num_slots; ++x) { + slot = &hvf_state->slots[x]; + if (slot->size && start < (slot->start + slot->size) && + (start + size) > slot->start) { + return slot; + } + } + return NULL; +} + +struct mac_slot { + int present; + uint64_t size; + uint64_t gpa_start; + uint64_t gva; +}; + +struct mac_slot mac_slots[32]; + +static int do_hvf_set_memory(hvf_slot *slot, hv_memory_flags_t flags) +{ + struct mac_slot *macslot; + hv_return_t ret; + + macslot = &mac_slots[slot->slot_id]; + + if (macslot->present) { + if (macslot->size != slot->size) { + macslot->present = 0; + ret = hv_vm_unmap(macslot->gpa_start, macslot->size); + assert_hvf_ok(ret); + } + } + + if (!slot->size) { + return 0; + } + + macslot->present = 1; + macslot->gpa_start = slot->start; + macslot->size = slot->size; + ret = hv_vm_map((hv_uvaddr_t)slot->mem, slot->start, slot->size, flags); + assert_hvf_ok(ret); + return 0; +} + +void hvf_set_phys_mem(MemoryRegionSection *section, bool add) +{ + hvf_slot *mem; + MemoryRegion *area = section->mr; + bool writeable = !area->readonly && !area->rom_device; + hv_memory_flags_t flags; + + if (!memory_region_is_ram(area)) { + if (writeable) { + return; + } else if (!memory_region_is_romd(area)) { + /* + * If the memory device is not in romd_mode, then we actually want + * to remove the hvf memory slot so all accesses will trap. + */ + add = false; + } + } + + mem = hvf_find_overlap_slot( + section->offset_within_address_space, + int128_get64(section->size)); + + if (mem && add) { + if (mem->size == int128_get64(section->size) && + mem->start == section->offset_within_address_space && + mem->mem == (memory_region_get_ram_ptr(area) + + section->offset_within_region)) { + return; /* Same region was attempted to register, go away. */ + } + } + + /* Region needs to be reset. set the size to 0 and remap it. */ + if (mem) { + mem->size = 0; + if (do_hvf_set_memory(mem, 0)) { + error_report("Failed to reset overlapping slot"); + abort(); + } + } + + if (!add) { + return; + } + + if (area->readonly || + (!memory_region_is_ram(area) && memory_region_is_romd(area))) { + flags = HV_MEMORY_READ | HV_MEMORY_EXEC; + } else { + flags = HV_MEMORY_READ | HV_MEMORY_WRITE | HV_MEMORY_EXEC; + } + + /* Now make a new slot. */ + int x; + + for (x = 0; x < hvf_state->num_slots; ++x) { + mem = &hvf_state->slots[x]; + if (!mem->size) { + break; + } + } + + if (x == hvf_state->num_slots) { + error_report("No free slots"); + abort(); + } + + mem->size = int128_get64(section->size); + mem->mem = memory_region_get_ram_ptr(area) + section->offset_within_region; + mem->start = section->offset_within_address_space; + mem->region = area; + + if (do_hvf_set_memory(mem, flags)) { + error_report("Error registering new memory slot"); + abort(); + } +} + +static void do_hvf_cpu_synchronize_state(CPUState *cpu, run_on_cpu_data arg) +{ + if (!cpu->vcpu_dirty) { + hvf_get_registers(cpu); + cpu->vcpu_dirty = true; + } +} + +void hvf_cpu_synchronize_state(CPUState *cpu) +{ + if (!cpu->vcpu_dirty) { + run_on_cpu(cpu, do_hvf_cpu_synchronize_state, RUN_ON_CPU_NULL); + } +} + +static void do_hvf_cpu_synchronize_post_reset(CPUState *cpu, + run_on_cpu_data arg) +{ + hvf_put_registers(cpu); + cpu->vcpu_dirty = false; +} + +void hvf_cpu_synchronize_post_reset(CPUState *cpu) +{ + run_on_cpu(cpu, do_hvf_cpu_synchronize_post_reset, RUN_ON_CPU_NULL); +} + +static void do_hvf_cpu_synchronize_post_init(CPUState *cpu, + run_on_cpu_data arg) +{ + hvf_put_registers(cpu); + cpu->vcpu_dirty = false; +} + +void hvf_cpu_synchronize_post_init(CPUState *cpu) +{ + run_on_cpu(cpu, do_hvf_cpu_synchronize_post_init, RUN_ON_CPU_NULL); +} + +static void do_hvf_cpu_synchronize_pre_loadvm(CPUState *cpu, + run_on_cpu_data arg) +{ + cpu->vcpu_dirty = true; +} + +void hvf_cpu_synchronize_pre_loadvm(CPUState *cpu) +{ + run_on_cpu(cpu, do_hvf_cpu_synchronize_pre_loadvm, RUN_ON_CPU_NULL); +} + +static void hvf_set_dirty_tracking(MemoryRegionSection *section, bool on) +{ + hvf_slot *slot; + + slot = hvf_find_overlap_slot( + section->offset_within_address_space, + int128_get64(section->size)); + + /* protect region against writes; begin tracking it */ + if (on) { + slot->flags |= HVF_SLOT_LOG; + hv_vm_protect((hv_gpaddr_t)slot->start, (size_t)slot->size, + HV_MEMORY_READ); + /* stop tracking region*/ + } else { + slot->flags &= ~HVF_SLOT_LOG; + hv_vm_protect((hv_gpaddr_t)slot->start, (size_t)slot->size, + HV_MEMORY_READ | HV_MEMORY_WRITE); + } +} + +static void hvf_log_start(MemoryListener *listener, + MemoryRegionSection *section, int old, int new) +{ + if (old != 0) { + return; + } + + hvf_set_dirty_tracking(section, 1); +} + +static void hvf_log_stop(MemoryListener *listener, + MemoryRegionSection *section, int old, int new) +{ + if (new != 0) { + return; + } + + hvf_set_dirty_tracking(section, 0); +} + +static void hvf_log_sync(MemoryListener *listener, + MemoryRegionSection *section) +{ + /* + * sync of dirty pages is handled elsewhere; just make sure we keep + * tracking the region. + */ + hvf_set_dirty_tracking(section, 1); +} + +static void hvf_region_add(MemoryListener *listener, + MemoryRegionSection *section) +{ + hvf_set_phys_mem(section, true); +} + +static void hvf_region_del(MemoryListener *listener, + MemoryRegionSection *section) +{ + hvf_set_phys_mem(section, false); +} + +static MemoryListener hvf_memory_listener = { + .priority = 10, + .region_add = hvf_region_add, + .region_del = hvf_region_del, + .log_start = hvf_log_start, + .log_stop = hvf_log_stop, + .log_sync = hvf_log_sync, +}; + +static void dummy_signal(int sig) +{ +} + +bool hvf_allowed; + +static int hvf_accel_init(MachineState *ms) +{ + int x; + hv_return_t ret; + HVFState *s; + + ret = hv_vm_create(HV_VM_DEFAULT); + assert_hvf_ok(ret); + + s = g_new0(HVFState, 1); + + s->num_slots = 32; + for (x = 0; x < s->num_slots; ++x) { + s->slots[x].size = 0; + s->slots[x].slot_id = x; + } + + hvf_state = s; + memory_listener_register(&hvf_memory_listener, &address_space_memory); + return 0; +} + +static void hvf_accel_class_init(ObjectClass *oc, void *data) +{ + AccelClass *ac = ACCEL_CLASS(oc); + ac->name = "HVF"; + ac->init_machine = hvf_accel_init; + ac->allowed = &hvf_allowed; +} + +static const TypeInfo hvf_accel_type = { + .name = TYPE_HVF_ACCEL, + .parent = TYPE_ACCEL, + .class_init = hvf_accel_class_init, +}; + +static void hvf_type_init(void) +{ + type_register_static(&hvf_accel_type); +} + +type_init(hvf_type_init); + /* * The HVF-specific vCPU thread function. This one should only run when the host * CPU supports the VMX "unrestricted guest" feature. diff --git a/target/i386/hvf/hvf.c b/target/i386/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf.c +++ b/target/i386/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ #include "hvf-accel-ops.h" -HVFState *hvf_state; - -/* Memory slots */ -hvf_slot *hvf_find_overlap_slot(uint64_t start, uint64_t size) -{ - hvf_slot *slot; - int x; - for (x = 0; x < hvf_state->num_slots; ++x) { - slot = &hvf_state->slots[x]; - if (slot->size && start < (slot->start + slot->size) && - (start + size) > slot->start) { - return slot; - } - } - return NULL; -} - -struct mac_slot { - int present; - uint64_t size; - uint64_t gpa_start; - uint64_t gva; -}; - -struct mac_slot mac_slots[32]; - -static int do_hvf_set_memory(hvf_slot *slot, hv_memory_flags_t flags) -{ - struct mac_slot *macslot; - hv_return_t ret; - - macslot = &mac_slots[slot->slot_id]; - - if (macslot->present) { - if (macslot->size != slot->size) { - macslot->present = 0; - ret = hv_vm_unmap(macslot->gpa_start, macslot->size); - assert_hvf_ok(ret); - } - } - - if (!slot->size) { - return 0; - } - - macslot->present = 1; - macslot->gpa_start = slot->start; - macslot->size = slot->size; - ret = hv_vm_map((hv_uvaddr_t)slot->mem, slot->start, slot->size, flags); - assert_hvf_ok(ret); - return 0; -} - -void hvf_set_phys_mem(MemoryRegionSection *section, bool add) -{ - hvf_slot *mem; - MemoryRegion *area = section->mr; - bool writeable = !area->readonly && !area->rom_device; - hv_memory_flags_t flags; - - if (!memory_region_is_ram(area)) { - if (writeable) { - return; - } else if (!memory_region_is_romd(area)) { - /* - * If the memory device is not in romd_mode, then we actually want - * to remove the hvf memory slot so all accesses will trap. - */ - add = false; - } - } - - mem = hvf_find_overlap_slot( - section->offset_within_address_space, - int128_get64(section->size)); - - if (mem && add) { - if (mem->size == int128_get64(section->size) && - mem->start == section->offset_within_address_space && - mem->mem == (memory_region_get_ram_ptr(area) + - section->offset_within_region)) { - return; /* Same region was attempted to register, go away. */ - } - } - - /* Region needs to be reset. set the size to 0 and remap it. */ - if (mem) { - mem->size = 0; - if (do_hvf_set_memory(mem, 0)) { - error_report("Failed to reset overlapping slot"); - abort(); - } - } - - if (!add) { - return; - } - - if (area->readonly || - (!memory_region_is_ram(area) && memory_region_is_romd(area))) { - flags = HV_MEMORY_READ | HV_MEMORY_EXEC; - } else { - flags = HV_MEMORY_READ | HV_MEMORY_WRITE | HV_MEMORY_EXEC; - } - - /* Now make a new slot. */ - int x; - - for (x = 0; x < hvf_state->num_slots; ++x) { - mem = &hvf_state->slots[x]; - if (!mem->size) { - break; - } - } - - if (x == hvf_state->num_slots) { - error_report("No free slots"); - abort(); - } - - mem->size = int128_get64(section->size); - mem->mem = memory_region_get_ram_ptr(area) + section->offset_within_region; - mem->start = section->offset_within_address_space; - mem->region = area; - - if (do_hvf_set_memory(mem, flags)) { - error_report("Error registering new memory slot"); - abort(); - } -} - void vmx_update_tpr(CPUState *cpu) { /* TODO: need integrate APIC handling */ @@ -XXX,XX +XXX,XX @@ void hvf_handle_io(CPUArchState *env, uint16_t port, void *buffer, } } -static void do_hvf_cpu_synchronize_state(CPUState *cpu, run_on_cpu_data arg) -{ - if (!cpu->vcpu_dirty) { - hvf_get_registers(cpu); - cpu->vcpu_dirty = true; - } -} - -void hvf_cpu_synchronize_state(CPUState *cpu) -{ - if (!cpu->vcpu_dirty) { - run_on_cpu(cpu, do_hvf_cpu_synchronize_state, RUN_ON_CPU_NULL); - } -} - -static void do_hvf_cpu_synchronize_post_reset(CPUState *cpu, - run_on_cpu_data arg) -{ - hvf_put_registers(cpu); - cpu->vcpu_dirty = false; -} - -void hvf_cpu_synchronize_post_reset(CPUState *cpu) -{ - run_on_cpu(cpu, do_hvf_cpu_synchronize_post_reset, RUN_ON_CPU_NULL); -} - -static void do_hvf_cpu_synchronize_post_init(CPUState *cpu, - run_on_cpu_data arg) -{ - hvf_put_registers(cpu); - cpu->vcpu_dirty = false; -} - -void hvf_cpu_synchronize_post_init(CPUState *cpu) -{ - run_on_cpu(cpu, do_hvf_cpu_synchronize_post_init, RUN_ON_CPU_NULL); -} - -static void do_hvf_cpu_synchronize_pre_loadvm(CPUState *cpu, - run_on_cpu_data arg) -{ - cpu->vcpu_dirty = true; -} - -void hvf_cpu_synchronize_pre_loadvm(CPUState *cpu) -{ - run_on_cpu(cpu, do_hvf_cpu_synchronize_pre_loadvm, RUN_ON_CPU_NULL); -} - static bool ept_emulation_fault(hvf_slot *slot, uint64_t gpa, uint64_t ept_qual) { int read, write; @@ -XXX,XX +XXX,XX @@ static bool ept_emulation_fault(hvf_slot *slot, uint64_t gpa, uint64_t ept_qual) return false; } -static void hvf_set_dirty_tracking(MemoryRegionSection *section, bool on) -{ - hvf_slot *slot; - - slot = hvf_find_overlap_slot( - section->offset_within_address_space, - int128_get64(section->size)); - - /* protect region against writes; begin tracking it */ - if (on) { - slot->flags |= HVF_SLOT_LOG; - hv_vm_protect((hv_gpaddr_t)slot->start, (size_t)slot->size, - HV_MEMORY_READ); - /* stop tracking region*/ - } else { - slot->flags &= ~HVF_SLOT_LOG; - hv_vm_protect((hv_gpaddr_t)slot->start, (size_t)slot->size, - HV_MEMORY_READ | HV_MEMORY_WRITE); - } -} - -static void hvf_log_start(MemoryListener *listener, - MemoryRegionSection *section, int old, int new) -{ - if (old != 0) { - return; - } - - hvf_set_dirty_tracking(section, 1); -} - -static void hvf_log_stop(MemoryListener *listener, - MemoryRegionSection *section, int old, int new) -{ - if (new != 0) { - return; - } - - hvf_set_dirty_tracking(section, 0); -} - -static void hvf_log_sync(MemoryListener *listener, - MemoryRegionSection *section) -{ - /* - * sync of dirty pages is handled elsewhere; just make sure we keep - * tracking the region. - */ - hvf_set_dirty_tracking(section, 1); -} - -static void hvf_region_add(MemoryListener *listener, - MemoryRegionSection *section) -{ - hvf_set_phys_mem(section, true); -} - -static void hvf_region_del(MemoryListener *listener, - MemoryRegionSection *section) -{ - hvf_set_phys_mem(section, false); -} - -static MemoryListener hvf_memory_listener = { - .priority = 10, - .region_add = hvf_region_add, - .region_del = hvf_region_del, - .log_start = hvf_log_start, - .log_stop = hvf_log_stop, - .log_sync = hvf_log_sync, -}; - void hvf_vcpu_destroy(CPUState *cpu) { X86CPU *x86_cpu = X86_CPU(cpu); @@ -XXX,XX +XXX,XX @@ void hvf_vcpu_destroy(CPUState *cpu) assert_hvf_ok(ret); } -static void dummy_signal(int sig) -{ -} - static void init_tsc_freq(CPUX86State *env) { size_t length; @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) return ret; } - -bool hvf_allowed; - -static int hvf_accel_init(MachineState *ms) -{ - int x; - hv_return_t ret; - HVFState *s; - - ret = hv_vm_create(HV_VM_DEFAULT); - assert_hvf_ok(ret); - - s = g_new0(HVFState, 1); - - s->num_slots = 32; - for (x = 0; x < s->num_slots; ++x) { - s->slots[x].size = 0; - s->slots[x].slot_id = x; - } - - hvf_state = s; - memory_listener_register(&hvf_memory_listener, &address_space_memory); - return 0; -} - -static void hvf_accel_class_init(ObjectClass *oc, void *data) -{ - AccelClass *ac = ACCEL_CLASS(oc); - ac->name = "HVF"; - ac->init_machine = hvf_accel_init; - ac->allowed = &hvf_allowed; -} - -static const TypeInfo hvf_accel_type = { - .name = TYPE_HVF_ACCEL, - .parent = TYPE_ACCEL, - .class_init = hvf_accel_class_init, -}; - -static void hvf_type_init(void) -{ - type_register_static(&hvf_accel_type); -} - -type_init(hvf_type_init); -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> Until now, Hypervisor.framework has only been available on x86_64 systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's start moving common code out into its own accel directory. This patch moves a few internal struct and constant defines over. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-5-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/hvf_int.h | 30 ++++++++++++++++++++++++++++++ target/i386/hvf/hvf-i386.h | 31 +------------------------------ 2 files changed, 31 insertions(+), 30 deletions(-) diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ #include <Hypervisor/hv.h> +/* hvf_slot flags */ +#define HVF_SLOT_LOG (1 << 0) + +typedef struct hvf_slot { + uint64_t start; + uint64_t size; + uint8_t *mem; + int slot_id; + uint32_t flags; + MemoryRegion *region; +} hvf_slot; + +typedef struct hvf_vcpu_caps { + uint64_t vmx_cap_pinbased; + uint64_t vmx_cap_procbased; + uint64_t vmx_cap_procbased2; + uint64_t vmx_cap_entry; + uint64_t vmx_cap_exit; + uint64_t vmx_cap_preemption_timer; +} hvf_vcpu_caps; + +struct HVFState { + AccelState parent; + hvf_slot slots[32]; + int num_slots; + + hvf_vcpu_caps *hvf_caps; +}; +extern HVFState *hvf_state; + void hvf_set_phys_mem(MemoryRegionSection *, bool); void assert_hvf_ok(hv_return_t ret); hvf_slot *hvf_find_overlap_slot(uint64_t, uint64_t); diff --git a/target/i386/hvf/hvf-i386.h b/target/i386/hvf/hvf-i386.h index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf-i386.h +++ b/target/i386/hvf/hvf-i386.h @@ -XXX,XX +XXX,XX @@ #include "qemu/accel.h" #include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" #include "cpu.h" #include "x86.h" -/* hvf_slot flags */ -#define HVF_SLOT_LOG (1 << 0) - -typedef struct hvf_slot { - uint64_t start; - uint64_t size; - uint8_t *mem; - int slot_id; - uint32_t flags; - MemoryRegion *region; -} hvf_slot; - -typedef struct hvf_vcpu_caps { - uint64_t vmx_cap_pinbased; - uint64_t vmx_cap_procbased; - uint64_t vmx_cap_procbased2; - uint64_t vmx_cap_entry; - uint64_t vmx_cap_exit; - uint64_t vmx_cap_preemption_timer; -} hvf_vcpu_caps; - -struct HVFState { - AccelState parent; - hvf_slot slots[32]; - int num_slots; - - hvf_vcpu_caps *hvf_caps; -}; -extern HVFState *hvf_state; - void hvf_handle_io(CPUArchState *, uint16_t, void *, int, int, int); #ifdef NEED_CPU_H -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> The hvf_set_phys_mem() function is only called within the same file. Make it static. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-6-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/hvf_int.h | 1 - accel/hvf/hvf-accel-ops.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ struct HVFState { }; extern HVFState *hvf_state; -void hvf_set_phys_mem(MemoryRegionSection *, bool); void assert_hvf_ok(hv_return_t ret); hvf_slot *hvf_find_overlap_slot(uint64_t, uint64_t); int hvf_put_registers(CPUState *); diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static int do_hvf_set_memory(hvf_slot *slot, hv_memory_flags_t flags) return 0; } -void hvf_set_phys_mem(MemoryRegionSection *section, bool add) +static void hvf_set_phys_mem(MemoryRegionSection *section, bool add) { hvf_slot *mem; MemoryRegion *area = section->mr; -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> The ARM version of Hypervisor.framework no longer defines these two types, so let's just revert to standard ones. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-7-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- accel/hvf/hvf-accel-ops.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static int do_hvf_set_memory(hvf_slot *slot, hv_memory_flags_t flags) macslot->present = 1; macslot->gpa_start = slot->start; macslot->size = slot->size; - ret = hv_vm_map((hv_uvaddr_t)slot->mem, slot->start, slot->size, flags); + ret = hv_vm_map(slot->mem, slot->start, slot->size, flags); assert_hvf_ok(ret); return 0; } @@ -XXX,XX +XXX,XX @@ static void hvf_set_dirty_tracking(MemoryRegionSection *section, bool on) /* protect region against writes; begin tracking it */ if (on) { slot->flags |= HVF_SLOT_LOG; - hv_vm_protect((hv_gpaddr_t)slot->start, (size_t)slot->size, + hv_vm_protect((uintptr_t)slot->start, (size_t)slot->size, HV_MEMORY_READ); /* stop tracking region*/ } else { slot->flags &= ~HVF_SLOT_LOG; - hv_vm_protect((hv_gpaddr_t)slot->start, (size_t)slot->size, + hv_vm_protect((uintptr_t)slot->start, (size_t)slot->size, HV_MEMORY_READ | HV_MEMORY_WRITE); } } -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> Until now, Hypervisor.framework has only been available on x86_64 systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's start moving common code out into its own accel directory. This patch splits the vcpu init and destroy functions into a generic and an architecture specific portion. This also allows us to move the generic functions into the generic hvf code, removing exported functions. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-8-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- accel/hvf/hvf-accel-ops.h | 2 -- include/sysemu/hvf_int.h | 2 ++ accel/hvf/hvf-accel-ops.c | 30 ++++++++++++++++++++++++++++++ target/i386/hvf/hvf.c | 23 ++--------------------- 4 files changed, 34 insertions(+), 23 deletions(-) diff --git a/accel/hvf/hvf-accel-ops.h b/accel/hvf/hvf-accel-ops.h index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.h +++ b/accel/hvf/hvf-accel-ops.h @@ -XXX,XX +XXX,XX @@ #include "sysemu/cpus.h" -int hvf_init_vcpu(CPUState *); int hvf_vcpu_exec(CPUState *); void hvf_cpu_synchronize_state(CPUState *); void hvf_cpu_synchronize_post_reset(CPUState *); void hvf_cpu_synchronize_post_init(CPUState *); void hvf_cpu_synchronize_pre_loadvm(CPUState *); -void hvf_vcpu_destroy(CPUState *); #endif /* HVF_CPUS_H */ diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ struct HVFState { extern HVFState *hvf_state; void assert_hvf_ok(hv_return_t ret); +int hvf_arch_init_vcpu(CPUState *cpu); +void hvf_arch_vcpu_destroy(CPUState *cpu); hvf_slot *hvf_find_overlap_slot(uint64_t, uint64_t); int hvf_put_registers(CPUState *); int hvf_get_registers(CPUState *); diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static void hvf_type_init(void) type_init(hvf_type_init); +static void hvf_vcpu_destroy(CPUState *cpu) +{ + hv_return_t ret = hv_vcpu_destroy(cpu->hvf_fd); + assert_hvf_ok(ret); + + hvf_arch_vcpu_destroy(cpu); +} + +static int hvf_init_vcpu(CPUState *cpu) +{ + int r; + + /* init cpu signals */ + sigset_t set; + struct sigaction sigact; + + memset(&sigact, 0, sizeof(sigact)); + sigact.sa_handler = dummy_signal; + sigaction(SIG_IPI, &sigact, NULL); + + pthread_sigmask(SIG_BLOCK, NULL, &set); + sigdelset(&set, SIG_IPI); + + r = hv_vcpu_create((hv_vcpuid_t *)&cpu->hvf_fd, HV_VCPU_DEFAULT); + cpu->vcpu_dirty = 1; + assert_hvf_ok(r); + + return hvf_arch_init_vcpu(cpu); +} + /* * The HVF-specific vCPU thread function. This one should only run when the host * CPU supports the VMX "unrestricted guest" feature. diff --git a/target/i386/hvf/hvf.c b/target/i386/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf.c +++ b/target/i386/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static bool ept_emulation_fault(hvf_slot *slot, uint64_t gpa, uint64_t ept_qual) return false; } -void hvf_vcpu_destroy(CPUState *cpu) +void hvf_arch_vcpu_destroy(CPUState *cpu) { X86CPU *x86_cpu = X86_CPU(cpu); CPUX86State *env = &x86_cpu->env; - hv_return_t ret = hv_vcpu_destroy((hv_vcpuid_t)cpu->hvf_fd); g_free(env->hvf_mmio_buf); - assert_hvf_ok(ret); } static void init_tsc_freq(CPUX86State *env) @@ -XXX,XX +XXX,XX @@ static inline bool apic_bus_freq_is_known(CPUX86State *env) return env->apic_bus_freq != 0; } -int hvf_init_vcpu(CPUState *cpu) +int hvf_arch_init_vcpu(CPUState *cpu) { - X86CPU *x86cpu = X86_CPU(cpu); CPUX86State *env = &x86cpu->env; - int r; - - /* init cpu signals */ - sigset_t set; - struct sigaction sigact; - - memset(&sigact, 0, sizeof(sigact)); - sigact.sa_handler = dummy_signal; - sigaction(SIG_IPI, &sigact, NULL); - - pthread_sigmask(SIG_BLOCK, NULL, &set); - sigdelset(&set, SIG_IPI); init_emu(); init_decoder(); @@ -XXX,XX +XXX,XX @@ int hvf_init_vcpu(CPUState *cpu) } } - r = hv_vcpu_create((hv_vcpuid_t *)&cpu->hvf_fd, HV_VCPU_DEFAULT); - cpu->vcpu_dirty = 1; - assert_hvf_ok(r); - if (hv_vmx_read_capability(HV_VMX_CAP_PINBASED, &hvf_state->hvf_caps->vmx_cap_pinbased)) { abort(); -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> There is no reason to call the hvf specific hvf_cpu_synchronize_state() when we can just use the generic cpu_synchronize_state() instead. This allows us to have less dependency on internal function definitions and allows us to make hvf_cpu_synchronize_state() static. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-9-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- accel/hvf/hvf-accel-ops.h | 1 - accel/hvf/hvf-accel-ops.c | 2 +- target/i386/hvf/x86hvf.c | 9 ++++----- 3 files changed, 5 insertions(+), 7 deletions(-) diff --git a/accel/hvf/hvf-accel-ops.h b/accel/hvf/hvf-accel-ops.h index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.h +++ b/accel/hvf/hvf-accel-ops.h @@ -XXX,XX +XXX,XX @@ #include "sysemu/cpus.h" int hvf_vcpu_exec(CPUState *); -void hvf_cpu_synchronize_state(CPUState *); void hvf_cpu_synchronize_post_reset(CPUState *); void hvf_cpu_synchronize_post_init(CPUState *); void hvf_cpu_synchronize_pre_loadvm(CPUState *); diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static void do_hvf_cpu_synchronize_state(CPUState *cpu, run_on_cpu_data arg) } } -void hvf_cpu_synchronize_state(CPUState *cpu) +static void hvf_cpu_synchronize_state(CPUState *cpu) { if (!cpu->vcpu_dirty) { run_on_cpu(cpu, do_hvf_cpu_synchronize_state, RUN_ON_CPU_NULL); diff --git a/target/i386/hvf/x86hvf.c b/target/i386/hvf/x86hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86hvf.c +++ b/target/i386/hvf/x86hvf.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "x86_descr.h" #include "x86_decode.h" +#include "sysemu/hw_accel.h" #include "hw/i386/apic_internal.h" #include <Hypervisor/hv.h> #include <Hypervisor/hv_vmx.h> -#include "accel/hvf/hvf-accel-ops.h" - void hvf_set_segment(struct CPUState *cpu, struct vmx_segment *vmx_seg, SegmentCache *qseg, bool is_tr) { @@ -XXX,XX +XXX,XX @@ int hvf_process_events(CPUState *cpu_state) env->eflags = rreg(cpu_state->hvf_fd, HV_X86_RFLAGS); if (cpu_state->interrupt_request & CPU_INTERRUPT_INIT) { - hvf_cpu_synchronize_state(cpu_state); + cpu_synchronize_state(cpu_state); do_cpu_init(cpu); } @@ -XXX,XX +XXX,XX @@ int hvf_process_events(CPUState *cpu_state) cpu_state->halted = 0; } if (cpu_state->interrupt_request & CPU_INTERRUPT_SIPI) { - hvf_cpu_synchronize_state(cpu_state); + cpu_synchronize_state(cpu_state); do_cpu_sipi(cpu); } if (cpu_state->interrupt_request & CPU_INTERRUPT_TPR) { cpu_state->interrupt_request &= ~CPU_INTERRUPT_TPR; - hvf_cpu_synchronize_state(cpu_state); + cpu_synchronize_state(cpu_state); apic_handle_tpr_access_report(cpu->apic_state, env->eip, env->tpr_access_type); } -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> The hvf accel synchronize functions are only used as input for local callback functions, so we can make them static. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-10-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- accel/hvf/hvf-accel-ops.h | 3 --- accel/hvf/hvf-accel-ops.c | 6 +++--- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/accel/hvf/hvf-accel-ops.h b/accel/hvf/hvf-accel-ops.h index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.h +++ b/accel/hvf/hvf-accel-ops.h @@ -XXX,XX +XXX,XX @@ #include "sysemu/cpus.h" int hvf_vcpu_exec(CPUState *); -void hvf_cpu_synchronize_post_reset(CPUState *); -void hvf_cpu_synchronize_post_init(CPUState *); -void hvf_cpu_synchronize_pre_loadvm(CPUState *); #endif /* HVF_CPUS_H */ diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static void do_hvf_cpu_synchronize_post_reset(CPUState *cpu, cpu->vcpu_dirty = false; } -void hvf_cpu_synchronize_post_reset(CPUState *cpu) +static void hvf_cpu_synchronize_post_reset(CPUState *cpu) { run_on_cpu(cpu, do_hvf_cpu_synchronize_post_reset, RUN_ON_CPU_NULL); } @@ -XXX,XX +XXX,XX @@ static void do_hvf_cpu_synchronize_post_init(CPUState *cpu, cpu->vcpu_dirty = false; } -void hvf_cpu_synchronize_post_init(CPUState *cpu) +static void hvf_cpu_synchronize_post_init(CPUState *cpu) { run_on_cpu(cpu, do_hvf_cpu_synchronize_post_init, RUN_ON_CPU_NULL); } @@ -XXX,XX +XXX,XX @@ static void do_hvf_cpu_synchronize_pre_loadvm(CPUState *cpu, cpu->vcpu_dirty = true; } -void hvf_cpu_synchronize_pre_loadvm(CPUState *cpu) +static void hvf_cpu_synchronize_pre_loadvm(CPUState *cpu) { run_on_cpu(cpu, do_hvf_cpu_synchronize_pre_loadvm, RUN_ON_CPU_NULL); } -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> We can move the definition of hvf_vcpu_exec() into our internal hvf header, obsoleting the need for hvf-accel-ops.h. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-11-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- accel/hvf/hvf-accel-ops.h | 17 ----------------- include/sysemu/hvf_int.h | 1 + accel/hvf/hvf-accel-ops.c | 2 -- target/i386/hvf/hvf.c | 2 -- 4 files changed, 1 insertion(+), 21 deletions(-) delete mode 100644 accel/hvf/hvf-accel-ops.h diff --git a/accel/hvf/hvf-accel-ops.h b/accel/hvf/hvf-accel-ops.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/accel/hvf/hvf-accel-ops.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -/* - * Accelerator CPUS Interface - * - * Copyright 2020 SUSE LLC - * - * This work is licensed under the terms of the GNU GPL, version 2 or later. - * See the COPYING file in the top-level directory. - */ - -#ifndef HVF_CPUS_H -#define HVF_CPUS_H - -#include "sysemu/cpus.h" - -int hvf_vcpu_exec(CPUState *); - -#endif /* HVF_CPUS_H */ diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ extern HVFState *hvf_state; void assert_hvf_ok(hv_return_t ret); int hvf_arch_init_vcpu(CPUState *cpu); void hvf_arch_vcpu_destroy(CPUState *cpu); +int hvf_vcpu_exec(CPUState *); hvf_slot *hvf_find_overlap_slot(uint64_t, uint64_t); int hvf_put_registers(CPUState *); int hvf_get_registers(CPUState *); diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/runstate.h" #include "qemu/guest-random.h" -#include "hvf-accel-ops.h" - HVFState *hvf_state; /* Memory slots */ diff --git a/target/i386/hvf/hvf.c b/target/i386/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf.c +++ b/target/i386/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ #include "qemu/accel.h" #include "target/i386/cpu.h" -#include "hvf-accel-ops.h" - void vmx_update_tpr(CPUState *cpu) { /* TODO: need integrate APIC handling */ -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> We will need more than a single field for hvf going forward. To keep the global vcpu struct uncluttered, let's allocate a special hvf vcpu struct, similar to how hax does it. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-12-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/core/cpu.h | 3 +- include/sysemu/hvf_int.h | 4 + target/i386/hvf/vmx.h | 24 +++-- accel/hvf/hvf-accel-ops.c | 8 +- target/i386/hvf/hvf.c | 104 +++++++++--------- target/i386/hvf/x86.c | 28 ++--- target/i386/hvf/x86_descr.c | 26 ++--- target/i386/hvf/x86_emu.c | 62 +++++------ target/i386/hvf/x86_mmu.c | 4 +- target/i386/hvf/x86_task.c | 12 +-- target/i386/hvf/x86hvf.c | 210 ++++++++++++++++++------------------ 11 files changed, 248 insertions(+), 237 deletions(-) diff --git a/include/hw/core/cpu.h b/include/hw/core/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/core/cpu.h +++ b/include/hw/core/cpu.h @@ -XXX,XX +XXX,XX @@ struct KVMState; struct kvm_run; struct hax_vcpu_state; +struct hvf_vcpu_state; #define TB_JMP_CACHE_BITS 12 #define TB_JMP_CACHE_SIZE (1 << TB_JMP_CACHE_BITS) @@ -XXX,XX +XXX,XX @@ struct CPUState { struct hax_vcpu_state *hax_vcpu; - int hvf_fd; + struct hvf_vcpu_state *hvf; /* track IOMMUs whose translations we've cached in the TCG TLB */ GArray *iommu_notifiers; diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/hvf_int.h +++ b/include/sysemu/hvf_int.h @@ -XXX,XX +XXX,XX @@ struct HVFState { }; extern HVFState *hvf_state; +struct hvf_vcpu_state { + int fd; +}; + void assert_hvf_ok(hv_return_t ret); int hvf_arch_init_vcpu(CPUState *cpu); void hvf_arch_vcpu_destroy(CPUState *cpu); diff --git a/target/i386/hvf/vmx.h b/target/i386/hvf/vmx.h index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/vmx.h +++ b/target/i386/hvf/vmx.h @@ -XXX,XX +XXX,XX @@ #include "vmcs.h" #include "cpu.h" #include "x86.h" +#include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" #include "exec/address-spaces.h" @@ -XXX,XX +XXX,XX @@ static inline void macvm_set_rip(CPUState *cpu, uint64_t rip) uint64_t val; /* BUG, should take considering overlap.. */ - wreg(cpu->hvf_fd, HV_X86_RIP, rip); + wreg(cpu->hvf->fd, HV_X86_RIP, rip); env->eip = rip; /* after moving forward in rip, we need to clean INTERRUPTABILITY */ - val = rvmcs(cpu->hvf_fd, VMCS_GUEST_INTERRUPTIBILITY); + val = rvmcs(cpu->hvf->fd, VMCS_GUEST_INTERRUPTIBILITY); if (val & (VMCS_INTERRUPTIBILITY_STI_BLOCKING | VMCS_INTERRUPTIBILITY_MOVSS_BLOCKING)) { env->hflags &= ~HF_INHIBIT_IRQ_MASK; - wvmcs(cpu->hvf_fd, VMCS_GUEST_INTERRUPTIBILITY, + wvmcs(cpu->hvf->fd, VMCS_GUEST_INTERRUPTIBILITY, val & ~(VMCS_INTERRUPTIBILITY_STI_BLOCKING | VMCS_INTERRUPTIBILITY_MOVSS_BLOCKING)); } @@ -XXX,XX +XXX,XX @@ static inline void vmx_clear_nmi_blocking(CPUState *cpu) CPUX86State *env = &x86_cpu->env; env->hflags2 &= ~HF2_NMI_MASK; - uint32_t gi = (uint32_t) rvmcs(cpu->hvf_fd, VMCS_GUEST_INTERRUPTIBILITY); + uint32_t gi = (uint32_t) rvmcs(cpu->hvf->fd, VMCS_GUEST_INTERRUPTIBILITY); gi &= ~VMCS_INTERRUPTIBILITY_NMI_BLOCKING; - wvmcs(cpu->hvf_fd, VMCS_GUEST_INTERRUPTIBILITY, gi); + wvmcs(cpu->hvf->fd, VMCS_GUEST_INTERRUPTIBILITY, gi); } static inline void vmx_set_nmi_blocking(CPUState *cpu) @@ -XXX,XX +XXX,XX @@ static inline void vmx_set_nmi_blocking(CPUState *cpu) CPUX86State *env = &x86_cpu->env; env->hflags2 |= HF2_NMI_MASK; - uint32_t gi = (uint32_t)rvmcs(cpu->hvf_fd, VMCS_GUEST_INTERRUPTIBILITY); + uint32_t gi = (uint32_t)rvmcs(cpu->hvf->fd, VMCS_GUEST_INTERRUPTIBILITY); gi |= VMCS_INTERRUPTIBILITY_NMI_BLOCKING; - wvmcs(cpu->hvf_fd, VMCS_GUEST_INTERRUPTIBILITY, gi); + wvmcs(cpu->hvf->fd, VMCS_GUEST_INTERRUPTIBILITY, gi); } static inline void vmx_set_nmi_window_exiting(CPUState *cpu) { uint64_t val; - val = rvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS); - wvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS, val | + val = rvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS); + wvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS, val | VMCS_PRI_PROC_BASED_CTLS_NMI_WINDOW_EXITING); } @@ -XXX,XX +XXX,XX @@ static inline void vmx_clear_nmi_window_exiting(CPUState *cpu) { uint64_t val; - val = rvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS); - wvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS, val & + val = rvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS); + wvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS, val & ~VMCS_PRI_PROC_BASED_CTLS_NMI_WINDOW_EXITING); } diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ type_init(hvf_type_init); static void hvf_vcpu_destroy(CPUState *cpu) { - hv_return_t ret = hv_vcpu_destroy(cpu->hvf_fd); + hv_return_t ret = hv_vcpu_destroy(cpu->hvf->fd); assert_hvf_ok(ret); hvf_arch_vcpu_destroy(cpu); + g_free(cpu->hvf); + cpu->hvf = NULL; } static int hvf_init_vcpu(CPUState *cpu) { int r; + cpu->hvf = g_malloc0(sizeof(*cpu->hvf)); + /* init cpu signals */ sigset_t set; struct sigaction sigact; @@ -XXX,XX +XXX,XX @@ static int hvf_init_vcpu(CPUState *cpu) pthread_sigmask(SIG_BLOCK, NULL, &set); sigdelset(&set, SIG_IPI); - r = hv_vcpu_create((hv_vcpuid_t *)&cpu->hvf_fd, HV_VCPU_DEFAULT); + r = hv_vcpu_create((hv_vcpuid_t *)&cpu->hvf->fd, HV_VCPU_DEFAULT); cpu->vcpu_dirty = 1; assert_hvf_ok(r); diff --git a/target/i386/hvf/hvf.c b/target/i386/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/hvf.c +++ b/target/i386/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ void vmx_update_tpr(CPUState *cpu) int tpr = cpu_get_apic_tpr(x86_cpu->apic_state) << 4; int irr = apic_get_highest_priority_irr(x86_cpu->apic_state); - wreg(cpu->hvf_fd, HV_X86_TPR, tpr); + wreg(cpu->hvf->fd, HV_X86_TPR, tpr); if (irr == -1) { - wvmcs(cpu->hvf_fd, VMCS_TPR_THRESHOLD, 0); + wvmcs(cpu->hvf->fd, VMCS_TPR_THRESHOLD, 0); } else { - wvmcs(cpu->hvf_fd, VMCS_TPR_THRESHOLD, (irr > tpr) ? tpr >> 4 : + wvmcs(cpu->hvf->fd, VMCS_TPR_THRESHOLD, (irr > tpr) ? tpr >> 4 : irr >> 4); } } @@ -XXX,XX +XXX,XX @@ void vmx_update_tpr(CPUState *cpu) static void update_apic_tpr(CPUState *cpu) { X86CPU *x86_cpu = X86_CPU(cpu); - int tpr = rreg(cpu->hvf_fd, HV_X86_TPR) >> 4; + int tpr = rreg(cpu->hvf->fd, HV_X86_TPR) >> 4; cpu_set_apic_tpr(x86_cpu->apic_state, tpr); } @@ -XXX,XX +XXX,XX @@ int hvf_arch_init_vcpu(CPUState *cpu) } /* set VMCS control fields */ - wvmcs(cpu->hvf_fd, VMCS_PIN_BASED_CTLS, + wvmcs(cpu->hvf->fd, VMCS_PIN_BASED_CTLS, cap2ctrl(hvf_state->hvf_caps->vmx_cap_pinbased, VMCS_PIN_BASED_CTLS_EXTINT | VMCS_PIN_BASED_CTLS_NMI | VMCS_PIN_BASED_CTLS_VNMI)); - wvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS, + wvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS, cap2ctrl(hvf_state->hvf_caps->vmx_cap_procbased, VMCS_PRI_PROC_BASED_CTLS_HLT | VMCS_PRI_PROC_BASED_CTLS_MWAIT | VMCS_PRI_PROC_BASED_CTLS_TSC_OFFSET | VMCS_PRI_PROC_BASED_CTLS_TPR_SHADOW) | VMCS_PRI_PROC_BASED_CTLS_SEC_CONTROL); - wvmcs(cpu->hvf_fd, VMCS_SEC_PROC_BASED_CTLS, + wvmcs(cpu->hvf->fd, VMCS_SEC_PROC_BASED_CTLS, cap2ctrl(hvf_state->hvf_caps->vmx_cap_procbased2, VMCS_PRI_PROC_BASED2_CTLS_APIC_ACCESSES)); - wvmcs(cpu->hvf_fd, VMCS_ENTRY_CTLS, cap2ctrl(hvf_state->hvf_caps->vmx_cap_entry, + wvmcs(cpu->hvf->fd, VMCS_ENTRY_CTLS, cap2ctrl(hvf_state->hvf_caps->vmx_cap_entry, 0)); - wvmcs(cpu->hvf_fd, VMCS_EXCEPTION_BITMAP, 0); /* Double fault */ + wvmcs(cpu->hvf->fd, VMCS_EXCEPTION_BITMAP, 0); /* Double fault */ - wvmcs(cpu->hvf_fd, VMCS_TPR_THRESHOLD, 0); + wvmcs(cpu->hvf->fd, VMCS_TPR_THRESHOLD, 0); x86cpu = X86_CPU(cpu); x86cpu->env.xsave_buf = qemu_memalign(4096, 4096); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_STAR, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_LSTAR, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_CSTAR, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_FMASK, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_FSBASE, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_GSBASE, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_KERNELGSBASE, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_TSC_AUX, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_IA32_TSC, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_IA32_SYSENTER_CS, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_IA32_SYSENTER_EIP, 1); - hv_vcpu_enable_native_msr(cpu->hvf_fd, MSR_IA32_SYSENTER_ESP, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_STAR, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_LSTAR, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_CSTAR, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_FMASK, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_FSBASE, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_GSBASE, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_KERNELGSBASE, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_TSC_AUX, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_IA32_TSC, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_IA32_SYSENTER_CS, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_IA32_SYSENTER_EIP, 1); + hv_vcpu_enable_native_msr(cpu->hvf->fd, MSR_IA32_SYSENTER_ESP, 1); return 0; } @@ -XXX,XX +XXX,XX @@ static void hvf_store_events(CPUState *cpu, uint32_t ins_len, uint64_t idtvec_in } if (idtvec_info & VMCS_IDT_VEC_ERRCODE_VALID) { env->has_error_code = true; - env->error_code = rvmcs(cpu->hvf_fd, VMCS_IDT_VECTORING_ERROR); + env->error_code = rvmcs(cpu->hvf->fd, VMCS_IDT_VECTORING_ERROR); } } - if ((rvmcs(cpu->hvf_fd, VMCS_GUEST_INTERRUPTIBILITY) & + if ((rvmcs(cpu->hvf->fd, VMCS_GUEST_INTERRUPTIBILITY) & VMCS_INTERRUPTIBILITY_NMI_BLOCKING)) { env->hflags2 |= HF2_NMI_MASK; } else { env->hflags2 &= ~HF2_NMI_MASK; } - if (rvmcs(cpu->hvf_fd, VMCS_GUEST_INTERRUPTIBILITY) & + if (rvmcs(cpu->hvf->fd, VMCS_GUEST_INTERRUPTIBILITY) & (VMCS_INTERRUPTIBILITY_STI_BLOCKING | VMCS_INTERRUPTIBILITY_MOVSS_BLOCKING)) { env->hflags |= HF_INHIBIT_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) return EXCP_HLT; } - hv_return_t r = hv_vcpu_run(cpu->hvf_fd); + hv_return_t r = hv_vcpu_run(cpu->hvf->fd); assert_hvf_ok(r); /* handle VMEXIT */ - uint64_t exit_reason = rvmcs(cpu->hvf_fd, VMCS_EXIT_REASON); - uint64_t exit_qual = rvmcs(cpu->hvf_fd, VMCS_EXIT_QUALIFICATION); - uint32_t ins_len = (uint32_t)rvmcs(cpu->hvf_fd, + uint64_t exit_reason = rvmcs(cpu->hvf->fd, VMCS_EXIT_REASON); + uint64_t exit_qual = rvmcs(cpu->hvf->fd, VMCS_EXIT_QUALIFICATION); + uint32_t ins_len = (uint32_t)rvmcs(cpu->hvf->fd, VMCS_EXIT_INSTRUCTION_LENGTH); - uint64_t idtvec_info = rvmcs(cpu->hvf_fd, VMCS_IDT_VECTORING_INFO); + uint64_t idtvec_info = rvmcs(cpu->hvf->fd, VMCS_IDT_VECTORING_INFO); hvf_store_events(cpu, ins_len, idtvec_info); - rip = rreg(cpu->hvf_fd, HV_X86_RIP); - env->eflags = rreg(cpu->hvf_fd, HV_X86_RFLAGS); + rip = rreg(cpu->hvf->fd, HV_X86_RIP); + env->eflags = rreg(cpu->hvf->fd, HV_X86_RFLAGS); qemu_mutex_lock_iothread(); @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) case EXIT_REASON_EPT_FAULT: { hvf_slot *slot; - uint64_t gpa = rvmcs(cpu->hvf_fd, VMCS_GUEST_PHYSICAL_ADDRESS); + uint64_t gpa = rvmcs(cpu->hvf->fd, VMCS_GUEST_PHYSICAL_ADDRESS); if (((idtvec_info & VMCS_IDT_VEC_VALID) == 0) && ((exit_qual & EXIT_QUAL_NMIUDTI) != 0)) { @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) store_regs(cpu); break; } else if (!string && !in) { - RAX(env) = rreg(cpu->hvf_fd, HV_X86_RAX); + RAX(env) = rreg(cpu->hvf->fd, HV_X86_RAX); hvf_handle_io(env, port, &RAX(env), 1, size, 1); macvm_set_rip(cpu, rip + ins_len); break; @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) break; } case EXIT_REASON_CPUID: { - uint32_t rax = (uint32_t)rreg(cpu->hvf_fd, HV_X86_RAX); - uint32_t rbx = (uint32_t)rreg(cpu->hvf_fd, HV_X86_RBX); - uint32_t rcx = (uint32_t)rreg(cpu->hvf_fd, HV_X86_RCX); - uint32_t rdx = (uint32_t)rreg(cpu->hvf_fd, HV_X86_RDX); + uint32_t rax = (uint32_t)rreg(cpu->hvf->fd, HV_X86_RAX); + uint32_t rbx = (uint32_t)rreg(cpu->hvf->fd, HV_X86_RBX); + uint32_t rcx = (uint32_t)rreg(cpu->hvf->fd, HV_X86_RCX); + uint32_t rdx = (uint32_t)rreg(cpu->hvf->fd, HV_X86_RDX); if (rax == 1) { /* CPUID1.ecx.OSXSAVE needs to know CR4 */ - env->cr[4] = rvmcs(cpu->hvf_fd, VMCS_GUEST_CR4); + env->cr[4] = rvmcs(cpu->hvf->fd, VMCS_GUEST_CR4); } hvf_cpu_x86_cpuid(env, rax, rcx, &rax, &rbx, &rcx, &rdx); - wreg(cpu->hvf_fd, HV_X86_RAX, rax); - wreg(cpu->hvf_fd, HV_X86_RBX, rbx); - wreg(cpu->hvf_fd, HV_X86_RCX, rcx); - wreg(cpu->hvf_fd, HV_X86_RDX, rdx); + wreg(cpu->hvf->fd, HV_X86_RAX, rax); + wreg(cpu->hvf->fd, HV_X86_RBX, rbx); + wreg(cpu->hvf->fd, HV_X86_RCX, rcx); + wreg(cpu->hvf->fd, HV_X86_RDX, rdx); macvm_set_rip(cpu, rip + ins_len); break; @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) case EXIT_REASON_XSETBV: { X86CPU *x86_cpu = X86_CPU(cpu); CPUX86State *env = &x86_cpu->env; - uint32_t eax = (uint32_t)rreg(cpu->hvf_fd, HV_X86_RAX); - uint32_t ecx = (uint32_t)rreg(cpu->hvf_fd, HV_X86_RCX); - uint32_t edx = (uint32_t)rreg(cpu->hvf_fd, HV_X86_RDX); + uint32_t eax = (uint32_t)rreg(cpu->hvf->fd, HV_X86_RAX); + uint32_t ecx = (uint32_t)rreg(cpu->hvf->fd, HV_X86_RCX); + uint32_t edx = (uint32_t)rreg(cpu->hvf->fd, HV_X86_RDX); if (ecx) { macvm_set_rip(cpu, rip + ins_len); break; } env->xcr0 = ((uint64_t)edx << 32) | eax; - wreg(cpu->hvf_fd, HV_X86_XCR0, env->xcr0 | 1); + wreg(cpu->hvf->fd, HV_X86_XCR0, env->xcr0 | 1); macvm_set_rip(cpu, rip + ins_len); break; } @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) switch (cr) { case 0x0: { - macvm_set_cr0(cpu->hvf_fd, RRX(env, reg)); + macvm_set_cr0(cpu->hvf->fd, RRX(env, reg)); break; } case 4: { - macvm_set_cr4(cpu->hvf_fd, RRX(env, reg)); + macvm_set_cr4(cpu->hvf->fd, RRX(env, reg)); break; } case 8: { @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) break; } case EXIT_REASON_TASK_SWITCH: { - uint64_t vinfo = rvmcs(cpu->hvf_fd, VMCS_IDT_VECTORING_INFO); + uint64_t vinfo = rvmcs(cpu->hvf->fd, VMCS_IDT_VECTORING_INFO); x68_segment_selector sel = {.sel = exit_qual & 0xffff}; vmx_handle_task_switch(cpu, sel, (exit_qual >> 30) & 0x3, vinfo & VMCS_INTR_VALID, vinfo & VECTORING_INFO_VECTOR_MASK, vinfo @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) break; } case EXIT_REASON_RDPMC: - wreg(cpu->hvf_fd, HV_X86_RAX, 0); - wreg(cpu->hvf_fd, HV_X86_RDX, 0); + wreg(cpu->hvf->fd, HV_X86_RAX, 0); + wreg(cpu->hvf->fd, HV_X86_RDX, 0); macvm_set_rip(cpu, rip + ins_len); break; case VMX_REASON_VMCALL: diff --git a/target/i386/hvf/x86.c b/target/i386/hvf/x86.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86.c +++ b/target/i386/hvf/x86.c @@ -XXX,XX +XXX,XX @@ bool x86_read_segment_descriptor(struct CPUState *cpu, } if (GDT_SEL == sel.ti) { - base = rvmcs(cpu->hvf_fd, VMCS_GUEST_GDTR_BASE); - limit = rvmcs(cpu->hvf_fd, VMCS_GUEST_GDTR_LIMIT); + base = rvmcs(cpu->hvf->fd, VMCS_GUEST_GDTR_BASE); + limit = rvmcs(cpu->hvf->fd, VMCS_GUEST_GDTR_LIMIT); } else { - base = rvmcs(cpu->hvf_fd, VMCS_GUEST_LDTR_BASE); - limit = rvmcs(cpu->hvf_fd, VMCS_GUEST_LDTR_LIMIT); + base = rvmcs(cpu->hvf->fd, VMCS_GUEST_LDTR_BASE); + limit = rvmcs(cpu->hvf->fd, VMCS_GUEST_LDTR_LIMIT); } if (sel.index * 8 >= limit) { @@ -XXX,XX +XXX,XX @@ bool x86_write_segment_descriptor(struct CPUState *cpu, uint32_t limit; if (GDT_SEL == sel.ti) { - base = rvmcs(cpu->hvf_fd, VMCS_GUEST_GDTR_BASE); - limit = rvmcs(cpu->hvf_fd, VMCS_GUEST_GDTR_LIMIT); + base = rvmcs(cpu->hvf->fd, VMCS_GUEST_GDTR_BASE); + limit = rvmcs(cpu->hvf->fd, VMCS_GUEST_GDTR_LIMIT); } else { - base = rvmcs(cpu->hvf_fd, VMCS_GUEST_LDTR_BASE); - limit = rvmcs(cpu->hvf_fd, VMCS_GUEST_LDTR_LIMIT); + base = rvmcs(cpu->hvf->fd, VMCS_GUEST_LDTR_BASE); + limit = rvmcs(cpu->hvf->fd, VMCS_GUEST_LDTR_LIMIT); } if (sel.index * 8 >= limit) { @@ -XXX,XX +XXX,XX @@ bool x86_write_segment_descriptor(struct CPUState *cpu, bool x86_read_call_gate(struct CPUState *cpu, struct x86_call_gate *idt_desc, int gate) { - target_ulong base = rvmcs(cpu->hvf_fd, VMCS_GUEST_IDTR_BASE); - uint32_t limit = rvmcs(cpu->hvf_fd, VMCS_GUEST_IDTR_LIMIT); + target_ulong base = rvmcs(cpu->hvf->fd, VMCS_GUEST_IDTR_BASE); + uint32_t limit = rvmcs(cpu->hvf->fd, VMCS_GUEST_IDTR_LIMIT); memset(idt_desc, 0, sizeof(*idt_desc)); if (gate * 8 >= limit) { @@ -XXX,XX +XXX,XX @@ bool x86_read_call_gate(struct CPUState *cpu, struct x86_call_gate *idt_desc, bool x86_is_protected(struct CPUState *cpu) { - uint64_t cr0 = rvmcs(cpu->hvf_fd, VMCS_GUEST_CR0); + uint64_t cr0 = rvmcs(cpu->hvf->fd, VMCS_GUEST_CR0); return cr0 & CR0_PE; } @@ -XXX,XX +XXX,XX @@ bool x86_is_v8086(struct CPUState *cpu) bool x86_is_long_mode(struct CPUState *cpu) { - return rvmcs(cpu->hvf_fd, VMCS_GUEST_IA32_EFER) & MSR_EFER_LMA; + return rvmcs(cpu->hvf->fd, VMCS_GUEST_IA32_EFER) & MSR_EFER_LMA; } bool x86_is_long64_mode(struct CPUState *cpu) @@ -XXX,XX +XXX,XX @@ bool x86_is_long64_mode(struct CPUState *cpu) bool x86_is_paging_mode(struct CPUState *cpu) { - uint64_t cr0 = rvmcs(cpu->hvf_fd, VMCS_GUEST_CR0); + uint64_t cr0 = rvmcs(cpu->hvf->fd, VMCS_GUEST_CR0); return cr0 & CR0_PG; } bool x86_is_pae_enabled(struct CPUState *cpu) { - uint64_t cr4 = rvmcs(cpu->hvf_fd, VMCS_GUEST_CR4); + uint64_t cr4 = rvmcs(cpu->hvf->fd, VMCS_GUEST_CR4); return cr4 & CR4_PAE; } diff --git a/target/i386/hvf/x86_descr.c b/target/i386/hvf/x86_descr.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86_descr.c +++ b/target/i386/hvf/x86_descr.c @@ -XXX,XX +XXX,XX @@ static const struct vmx_segment_field { uint32_t vmx_read_segment_limit(CPUState *cpu, X86Seg seg) { - return (uint32_t)rvmcs(cpu->hvf_fd, vmx_segment_fields[seg].limit); + return (uint32_t)rvmcs(cpu->hvf->fd, vmx_segment_fields[seg].limit); } uint32_t vmx_read_segment_ar(CPUState *cpu, X86Seg seg) { - return (uint32_t)rvmcs(cpu->hvf_fd, vmx_segment_fields[seg].ar_bytes); + return (uint32_t)rvmcs(cpu->hvf->fd, vmx_segment_fields[seg].ar_bytes); } uint64_t vmx_read_segment_base(CPUState *cpu, X86Seg seg) { - return rvmcs(cpu->hvf_fd, vmx_segment_fields[seg].base); + return rvmcs(cpu->hvf->fd, vmx_segment_fields[seg].base); } x68_segment_selector vmx_read_segment_selector(CPUState *cpu, X86Seg seg) { x68_segment_selector sel; - sel.sel = rvmcs(cpu->hvf_fd, vmx_segment_fields[seg].selector); + sel.sel = rvmcs(cpu->hvf->fd, vmx_segment_fields[seg].selector); return sel; } void vmx_write_segment_selector(struct CPUState *cpu, x68_segment_selector selector, X86Seg seg) { - wvmcs(cpu->hvf_fd, vmx_segment_fields[seg].selector, selector.sel); + wvmcs(cpu->hvf->fd, vmx_segment_fields[seg].selector, selector.sel); } void vmx_read_segment_descriptor(struct CPUState *cpu, struct vmx_segment *desc, X86Seg seg) { - desc->sel = rvmcs(cpu->hvf_fd, vmx_segment_fields[seg].selector); - desc->base = rvmcs(cpu->hvf_fd, vmx_segment_fields[seg].base); - desc->limit = rvmcs(cpu->hvf_fd, vmx_segment_fields[seg].limit); - desc->ar = rvmcs(cpu->hvf_fd, vmx_segment_fields[seg].ar_bytes); + desc->sel = rvmcs(cpu->hvf->fd, vmx_segment_fields[seg].selector); + desc->base = rvmcs(cpu->hvf->fd, vmx_segment_fields[seg].base); + desc->limit = rvmcs(cpu->hvf->fd, vmx_segment_fields[seg].limit); + desc->ar = rvmcs(cpu->hvf->fd, vmx_segment_fields[seg].ar_bytes); } void vmx_write_segment_descriptor(CPUState *cpu, struct vmx_segment *desc, X86Seg seg) { const struct vmx_segment_field *sf = &vmx_segment_fields[seg]; - wvmcs(cpu->hvf_fd, sf->base, desc->base); - wvmcs(cpu->hvf_fd, sf->limit, desc->limit); - wvmcs(cpu->hvf_fd, sf->selector, desc->sel); - wvmcs(cpu->hvf_fd, sf->ar_bytes, desc->ar); + wvmcs(cpu->hvf->fd, sf->base, desc->base); + wvmcs(cpu->hvf->fd, sf->limit, desc->limit); + wvmcs(cpu->hvf->fd, sf->selector, desc->sel); + wvmcs(cpu->hvf->fd, sf->ar_bytes, desc->ar); } void x86_segment_descriptor_to_vmx(struct CPUState *cpu, x68_segment_selector selector, struct x86_segment_descriptor *desc, struct vmx_segment *vmx_desc) diff --git a/target/i386/hvf/x86_emu.c b/target/i386/hvf/x86_emu.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86_emu.c +++ b/target/i386/hvf/x86_emu.c @@ -XXX,XX +XXX,XX @@ void simulate_rdmsr(struct CPUState *cpu) switch (msr) { case MSR_IA32_TSC: - val = rdtscp() + rvmcs(cpu->hvf_fd, VMCS_TSC_OFFSET); + val = rdtscp() + rvmcs(cpu->hvf->fd, VMCS_TSC_OFFSET); break; case MSR_IA32_APICBASE: val = cpu_get_apic_base(X86_CPU(cpu)->apic_state); @@ -XXX,XX +XXX,XX @@ void simulate_rdmsr(struct CPUState *cpu) val = x86_cpu->ucode_rev; break; case MSR_EFER: - val = rvmcs(cpu->hvf_fd, VMCS_GUEST_IA32_EFER); + val = rvmcs(cpu->hvf->fd, VMCS_GUEST_IA32_EFER); break; case MSR_FSBASE: - val = rvmcs(cpu->hvf_fd, VMCS_GUEST_FS_BASE); + val = rvmcs(cpu->hvf->fd, VMCS_GUEST_FS_BASE); break; case MSR_GSBASE: - val = rvmcs(cpu->hvf_fd, VMCS_GUEST_GS_BASE); + val = rvmcs(cpu->hvf->fd, VMCS_GUEST_GS_BASE); break; case MSR_KERNELGSBASE: - val = rvmcs(cpu->hvf_fd, VMCS_HOST_FS_BASE); + val = rvmcs(cpu->hvf->fd, VMCS_HOST_FS_BASE); break; case MSR_STAR: abort(); @@ -XXX,XX +XXX,XX @@ void simulate_wrmsr(struct CPUState *cpu) cpu_set_apic_base(X86_CPU(cpu)->apic_state, data); break; case MSR_FSBASE: - wvmcs(cpu->hvf_fd, VMCS_GUEST_FS_BASE, data); + wvmcs(cpu->hvf->fd, VMCS_GUEST_FS_BASE, data); break; case MSR_GSBASE: - wvmcs(cpu->hvf_fd, VMCS_GUEST_GS_BASE, data); + wvmcs(cpu->hvf->fd, VMCS_GUEST_GS_BASE, data); break; case MSR_KERNELGSBASE: - wvmcs(cpu->hvf_fd, VMCS_HOST_FS_BASE, data); + wvmcs(cpu->hvf->fd, VMCS_HOST_FS_BASE, data); break; case MSR_STAR: abort(); @@ -XXX,XX +XXX,XX @@ void simulate_wrmsr(struct CPUState *cpu) break; case MSR_EFER: /*printf("new efer %llx\n", EFER(cpu));*/ - wvmcs(cpu->hvf_fd, VMCS_GUEST_IA32_EFER, data); + wvmcs(cpu->hvf->fd, VMCS_GUEST_IA32_EFER, data); if (data & MSR_EFER_NXE) { - hv_vcpu_invalidate_tlb(cpu->hvf_fd); + hv_vcpu_invalidate_tlb(cpu->hvf->fd); } break; case MSR_MTRRphysBase(0): @@ -XXX,XX +XXX,XX @@ void load_regs(struct CPUState *cpu) CPUX86State *env = &x86_cpu->env; int i = 0; - RRX(env, R_EAX) = rreg(cpu->hvf_fd, HV_X86_RAX); - RRX(env, R_EBX) = rreg(cpu->hvf_fd, HV_X86_RBX); - RRX(env, R_ECX) = rreg(cpu->hvf_fd, HV_X86_RCX); - RRX(env, R_EDX) = rreg(cpu->hvf_fd, HV_X86_RDX); - RRX(env, R_ESI) = rreg(cpu->hvf_fd, HV_X86_RSI); - RRX(env, R_EDI) = rreg(cpu->hvf_fd, HV_X86_RDI); - RRX(env, R_ESP) = rreg(cpu->hvf_fd, HV_X86_RSP); - RRX(env, R_EBP) = rreg(cpu->hvf_fd, HV_X86_RBP); + RRX(env, R_EAX) = rreg(cpu->hvf->fd, HV_X86_RAX); + RRX(env, R_EBX) = rreg(cpu->hvf->fd, HV_X86_RBX); + RRX(env, R_ECX) = rreg(cpu->hvf->fd, HV_X86_RCX); + RRX(env, R_EDX) = rreg(cpu->hvf->fd, HV_X86_RDX); + RRX(env, R_ESI) = rreg(cpu->hvf->fd, HV_X86_RSI); + RRX(env, R_EDI) = rreg(cpu->hvf->fd, HV_X86_RDI); + RRX(env, R_ESP) = rreg(cpu->hvf->fd, HV_X86_RSP); + RRX(env, R_EBP) = rreg(cpu->hvf->fd, HV_X86_RBP); for (i = 8; i < 16; i++) { - RRX(env, i) = rreg(cpu->hvf_fd, HV_X86_RAX + i); + RRX(env, i) = rreg(cpu->hvf->fd, HV_X86_RAX + i); } - env->eflags = rreg(cpu->hvf_fd, HV_X86_RFLAGS); + env->eflags = rreg(cpu->hvf->fd, HV_X86_RFLAGS); rflags_to_lflags(env); - env->eip = rreg(cpu->hvf_fd, HV_X86_RIP); + env->eip = rreg(cpu->hvf->fd, HV_X86_RIP); } void store_regs(struct CPUState *cpu) @@ -XXX,XX +XXX,XX @@ void store_regs(struct CPUState *cpu) CPUX86State *env = &x86_cpu->env; int i = 0; - wreg(cpu->hvf_fd, HV_X86_RAX, RAX(env)); - wreg(cpu->hvf_fd, HV_X86_RBX, RBX(env)); - wreg(cpu->hvf_fd, HV_X86_RCX, RCX(env)); - wreg(cpu->hvf_fd, HV_X86_RDX, RDX(env)); - wreg(cpu->hvf_fd, HV_X86_RSI, RSI(env)); - wreg(cpu->hvf_fd, HV_X86_RDI, RDI(env)); - wreg(cpu->hvf_fd, HV_X86_RBP, RBP(env)); - wreg(cpu->hvf_fd, HV_X86_RSP, RSP(env)); + wreg(cpu->hvf->fd, HV_X86_RAX, RAX(env)); + wreg(cpu->hvf->fd, HV_X86_RBX, RBX(env)); + wreg(cpu->hvf->fd, HV_X86_RCX, RCX(env)); + wreg(cpu->hvf->fd, HV_X86_RDX, RDX(env)); + wreg(cpu->hvf->fd, HV_X86_RSI, RSI(env)); + wreg(cpu->hvf->fd, HV_X86_RDI, RDI(env)); + wreg(cpu->hvf->fd, HV_X86_RBP, RBP(env)); + wreg(cpu->hvf->fd, HV_X86_RSP, RSP(env)); for (i = 8; i < 16; i++) { - wreg(cpu->hvf_fd, HV_X86_RAX + i, RRX(env, i)); + wreg(cpu->hvf->fd, HV_X86_RAX + i, RRX(env, i)); } lflags_to_rflags(env); - wreg(cpu->hvf_fd, HV_X86_RFLAGS, env->eflags); + wreg(cpu->hvf->fd, HV_X86_RFLAGS, env->eflags); macvm_set_rip(cpu, env->eip); } diff --git a/target/i386/hvf/x86_mmu.c b/target/i386/hvf/x86_mmu.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86_mmu.c +++ b/target/i386/hvf/x86_mmu.c @@ -XXX,XX +XXX,XX @@ static bool test_pt_entry(struct CPUState *cpu, struct gpt_translation *pt, pt->err_code |= MMU_PAGE_PT; } - uint32_t cr0 = rvmcs(cpu->hvf_fd, VMCS_GUEST_CR0); + uint32_t cr0 = rvmcs(cpu->hvf->fd, VMCS_GUEST_CR0); /* check protection */ if (cr0 & CR0_WP) { if (pt->write_access && !pte_write_access(pte)) { @@ -XXX,XX +XXX,XX @@ static bool walk_gpt(struct CPUState *cpu, target_ulong addr, int err_code, { int top_level, level; bool is_large = false; - target_ulong cr3 = rvmcs(cpu->hvf_fd, VMCS_GUEST_CR3); + target_ulong cr3 = rvmcs(cpu->hvf->fd, VMCS_GUEST_CR3); uint64_t page_mask = pae ? PAE_PTE_PAGE_MASK : LEGACY_PTE_PAGE_MASK; memset(pt, 0, sizeof(*pt)); diff --git a/target/i386/hvf/x86_task.c b/target/i386/hvf/x86_task.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86_task.c +++ b/target/i386/hvf/x86_task.c @@ -XXX,XX +XXX,XX @@ static void load_state_from_tss32(CPUState *cpu, struct x86_tss_segment32 *tss) X86CPU *x86_cpu = X86_CPU(cpu); CPUX86State *env = &x86_cpu->env; - wvmcs(cpu->hvf_fd, VMCS_GUEST_CR3, tss->cr3); + wvmcs(cpu->hvf->fd, VMCS_GUEST_CR3, tss->cr3); env->eip = tss->eip; env->eflags = tss->eflags | 2; @@ -XXX,XX +XXX,XX @@ static int task_switch_32(CPUState *cpu, x68_segment_selector tss_sel, x68_segme void vmx_handle_task_switch(CPUState *cpu, x68_segment_selector tss_sel, int reason, bool gate_valid, uint8_t gate, uint64_t gate_type) { - uint64_t rip = rreg(cpu->hvf_fd, HV_X86_RIP); + uint64_t rip = rreg(cpu->hvf->fd, HV_X86_RIP); if (!gate_valid || (gate_type != VMCS_INTR_T_HWEXCEPTION && gate_type != VMCS_INTR_T_HWINTR && gate_type != VMCS_INTR_T_NMI)) { - int ins_len = rvmcs(cpu->hvf_fd, VMCS_EXIT_INSTRUCTION_LENGTH); + int ins_len = rvmcs(cpu->hvf->fd, VMCS_EXIT_INSTRUCTION_LENGTH); macvm_set_rip(cpu, rip + ins_len); return; } @@ -XXX,XX +XXX,XX @@ void vmx_handle_task_switch(CPUState *cpu, x68_segment_selector tss_sel, int rea //ret = task_switch_16(cpu, tss_sel, old_tss_sel, old_tss_base, &next_tss_desc); VM_PANIC("task_switch_16"); - macvm_set_cr0(cpu->hvf_fd, rvmcs(cpu->hvf_fd, VMCS_GUEST_CR0) | CR0_TS); + macvm_set_cr0(cpu->hvf->fd, rvmcs(cpu->hvf->fd, VMCS_GUEST_CR0) | CR0_TS); x86_segment_descriptor_to_vmx(cpu, tss_sel, &next_tss_desc, &vmx_seg); vmx_write_segment_descriptor(cpu, &vmx_seg, R_TR); store_regs(cpu); - hv_vcpu_invalidate_tlb(cpu->hvf_fd); - hv_vcpu_flush(cpu->hvf_fd); + hv_vcpu_invalidate_tlb(cpu->hvf->fd); + hv_vcpu_flush(cpu->hvf->fd); } diff --git a/target/i386/hvf/x86hvf.c b/target/i386/hvf/x86hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86hvf.c +++ b/target/i386/hvf/x86hvf.c @@ -XXX,XX +XXX,XX @@ void hvf_put_xsave(CPUState *cpu_state) x86_cpu_xsave_all_areas(X86_CPU(cpu_state), xsave); - if (hv_vcpu_write_fpstate(cpu_state->hvf_fd, (void*)xsave, 4096)) { + if (hv_vcpu_write_fpstate(cpu_state->hvf->fd, (void*)xsave, 4096)) { abort(); } } @@ -XXX,XX +XXX,XX @@ void hvf_put_segments(CPUState *cpu_state) CPUX86State *env = &X86_CPU(cpu_state)->env; struct vmx_segment seg; - wvmcs(cpu_state->hvf_fd, VMCS_GUEST_IDTR_LIMIT, env->idt.limit); - wvmcs(cpu_state->hvf_fd, VMCS_GUEST_IDTR_BASE, env->idt.base); + wvmcs(cpu_state->hvf->fd, VMCS_GUEST_IDTR_LIMIT, env->idt.limit); + wvmcs(cpu_state->hvf->fd, VMCS_GUEST_IDTR_BASE, env->idt.base); - wvmcs(cpu_state->hvf_fd, VMCS_GUEST_GDTR_LIMIT, env->gdt.limit); - wvmcs(cpu_state->hvf_fd, VMCS_GUEST_GDTR_BASE, env->gdt.base); + wvmcs(cpu_state->hvf->fd, VMCS_GUEST_GDTR_LIMIT, env->gdt.limit); + wvmcs(cpu_state->hvf->fd, VMCS_GUEST_GDTR_BASE, env->gdt.base); - /* wvmcs(cpu_state->hvf_fd, VMCS_GUEST_CR2, env->cr[2]); */ - wvmcs(cpu_state->hvf_fd, VMCS_GUEST_CR3, env->cr[3]); + /* wvmcs(cpu_state->hvf->fd, VMCS_GUEST_CR2, env->cr[2]); */ + wvmcs(cpu_state->hvf->fd, VMCS_GUEST_CR3, env->cr[3]); vmx_update_tpr(cpu_state); - wvmcs(cpu_state->hvf_fd, VMCS_GUEST_IA32_EFER, env->efer); + wvmcs(cpu_state->hvf->fd, VMCS_GUEST_IA32_EFER, env->efer); - macvm_set_cr4(cpu_state->hvf_fd, env->cr[4]); - macvm_set_cr0(cpu_state->hvf_fd, env->cr[0]); + macvm_set_cr4(cpu_state->hvf->fd, env->cr[4]); + macvm_set_cr0(cpu_state->hvf->fd, env->cr[0]); hvf_set_segment(cpu_state, &seg, &env->segs[R_CS], false); vmx_write_segment_descriptor(cpu_state, &seg, R_CS); @@ -XXX,XX +XXX,XX @@ void hvf_put_segments(CPUState *cpu_state) hvf_set_segment(cpu_state, &seg, &env->ldt, false); vmx_write_segment_descriptor(cpu_state, &seg, R_LDTR); - hv_vcpu_flush(cpu_state->hvf_fd); + hv_vcpu_flush(cpu_state->hvf->fd); } void hvf_put_msrs(CPUState *cpu_state) { CPUX86State *env = &X86_CPU(cpu_state)->env; - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_IA32_SYSENTER_CS, + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_IA32_SYSENTER_CS, env->sysenter_cs); - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_IA32_SYSENTER_ESP, + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_IA32_SYSENTER_ESP, env->sysenter_esp); - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_IA32_SYSENTER_EIP, + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_IA32_SYSENTER_EIP, env->sysenter_eip); - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_STAR, env->star); + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_STAR, env->star); #ifdef TARGET_X86_64 - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_CSTAR, env->cstar); - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_KERNELGSBASE, env->kernelgsbase); - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_FMASK, env->fmask); - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_LSTAR, env->lstar); + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_CSTAR, env->cstar); + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_KERNELGSBASE, env->kernelgsbase); + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_FMASK, env->fmask); + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_LSTAR, env->lstar); #endif - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_GSBASE, env->segs[R_GS].base); - hv_vcpu_write_msr(cpu_state->hvf_fd, MSR_FSBASE, env->segs[R_FS].base); + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_GSBASE, env->segs[R_GS].base); + hv_vcpu_write_msr(cpu_state->hvf->fd, MSR_FSBASE, env->segs[R_FS].base); } @@ -XXX,XX +XXX,XX @@ void hvf_get_xsave(CPUState *cpu_state) xsave = X86_CPU(cpu_state)->env.xsave_buf; - if (hv_vcpu_read_fpstate(cpu_state->hvf_fd, (void*)xsave, 4096)) { + if (hv_vcpu_read_fpstate(cpu_state->hvf->fd, (void*)xsave, 4096)) { abort(); } @@ -XXX,XX +XXX,XX @@ void hvf_get_segments(CPUState *cpu_state) vmx_read_segment_descriptor(cpu_state, &seg, R_LDTR); hvf_get_segment(&env->ldt, &seg); - env->idt.limit = rvmcs(cpu_state->hvf_fd, VMCS_GUEST_IDTR_LIMIT); - env->idt.base = rvmcs(cpu_state->hvf_fd, VMCS_GUEST_IDTR_BASE); - env->gdt.limit = rvmcs(cpu_state->hvf_fd, VMCS_GUEST_GDTR_LIMIT); - env->gdt.base = rvmcs(cpu_state->hvf_fd, VMCS_GUEST_GDTR_BASE); + env->idt.limit = rvmcs(cpu_state->hvf->fd, VMCS_GUEST_IDTR_LIMIT); + env->idt.base = rvmcs(cpu_state->hvf->fd, VMCS_GUEST_IDTR_BASE); + env->gdt.limit = rvmcs(cpu_state->hvf->fd, VMCS_GUEST_GDTR_LIMIT); + env->gdt.base = rvmcs(cpu_state->hvf->fd, VMCS_GUEST_GDTR_BASE); - env->cr[0] = rvmcs(cpu_state->hvf_fd, VMCS_GUEST_CR0); + env->cr[0] = rvmcs(cpu_state->hvf->fd, VMCS_GUEST_CR0); env->cr[2] = 0; - env->cr[3] = rvmcs(cpu_state->hvf_fd, VMCS_GUEST_CR3); - env->cr[4] = rvmcs(cpu_state->hvf_fd, VMCS_GUEST_CR4); + env->cr[3] = rvmcs(cpu_state->hvf->fd, VMCS_GUEST_CR3); + env->cr[4] = rvmcs(cpu_state->hvf->fd, VMCS_GUEST_CR4); - env->efer = rvmcs(cpu_state->hvf_fd, VMCS_GUEST_IA32_EFER); + env->efer = rvmcs(cpu_state->hvf->fd, VMCS_GUEST_IA32_EFER); } void hvf_get_msrs(CPUState *cpu_state) @@ -XXX,XX +XXX,XX @@ void hvf_get_msrs(CPUState *cpu_state) CPUX86State *env = &X86_CPU(cpu_state)->env; uint64_t tmp; - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_IA32_SYSENTER_CS, &tmp); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_IA32_SYSENTER_CS, &tmp); env->sysenter_cs = tmp; - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_IA32_SYSENTER_ESP, &tmp); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_IA32_SYSENTER_ESP, &tmp); env->sysenter_esp = tmp; - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_IA32_SYSENTER_EIP, &tmp); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_IA32_SYSENTER_EIP, &tmp); env->sysenter_eip = tmp; - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_STAR, &env->star); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_STAR, &env->star); #ifdef TARGET_X86_64 - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_CSTAR, &env->cstar); - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_KERNELGSBASE, &env->kernelgsbase); - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_FMASK, &env->fmask); - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_LSTAR, &env->lstar); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_CSTAR, &env->cstar); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_KERNELGSBASE, &env->kernelgsbase); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_FMASK, &env->fmask); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_LSTAR, &env->lstar); #endif - hv_vcpu_read_msr(cpu_state->hvf_fd, MSR_IA32_APICBASE, &tmp); + hv_vcpu_read_msr(cpu_state->hvf->fd, MSR_IA32_APICBASE, &tmp); - env->tsc = rdtscp() + rvmcs(cpu_state->hvf_fd, VMCS_TSC_OFFSET); + env->tsc = rdtscp() + rvmcs(cpu_state->hvf->fd, VMCS_TSC_OFFSET); } int hvf_put_registers(CPUState *cpu_state) @@ -XXX,XX +XXX,XX @@ int hvf_put_registers(CPUState *cpu_state) X86CPU *x86cpu = X86_CPU(cpu_state); CPUX86State *env = &x86cpu->env; - wreg(cpu_state->hvf_fd, HV_X86_RAX, env->regs[R_EAX]); - wreg(cpu_state->hvf_fd, HV_X86_RBX, env->regs[R_EBX]); - wreg(cpu_state->hvf_fd, HV_X86_RCX, env->regs[R_ECX]); - wreg(cpu_state->hvf_fd, HV_X86_RDX, env->regs[R_EDX]); - wreg(cpu_state->hvf_fd, HV_X86_RBP, env->regs[R_EBP]); - wreg(cpu_state->hvf_fd, HV_X86_RSP, env->regs[R_ESP]); - wreg(cpu_state->hvf_fd, HV_X86_RSI, env->regs[R_ESI]); - wreg(cpu_state->hvf_fd, HV_X86_RDI, env->regs[R_EDI]); - wreg(cpu_state->hvf_fd, HV_X86_R8, env->regs[8]); - wreg(cpu_state->hvf_fd, HV_X86_R9, env->regs[9]); - wreg(cpu_state->hvf_fd, HV_X86_R10, env->regs[10]); - wreg(cpu_state->hvf_fd, HV_X86_R11, env->regs[11]); - wreg(cpu_state->hvf_fd, HV_X86_R12, env->regs[12]); - wreg(cpu_state->hvf_fd, HV_X86_R13, env->regs[13]); - wreg(cpu_state->hvf_fd, HV_X86_R14, env->regs[14]); - wreg(cpu_state->hvf_fd, HV_X86_R15, env->regs[15]); - wreg(cpu_state->hvf_fd, HV_X86_RFLAGS, env->eflags); - wreg(cpu_state->hvf_fd, HV_X86_RIP, env->eip); + wreg(cpu_state->hvf->fd, HV_X86_RAX, env->regs[R_EAX]); + wreg(cpu_state->hvf->fd, HV_X86_RBX, env->regs[R_EBX]); + wreg(cpu_state->hvf->fd, HV_X86_RCX, env->regs[R_ECX]); + wreg(cpu_state->hvf->fd, HV_X86_RDX, env->regs[R_EDX]); + wreg(cpu_state->hvf->fd, HV_X86_RBP, env->regs[R_EBP]); + wreg(cpu_state->hvf->fd, HV_X86_RSP, env->regs[R_ESP]); + wreg(cpu_state->hvf->fd, HV_X86_RSI, env->regs[R_ESI]); + wreg(cpu_state->hvf->fd, HV_X86_RDI, env->regs[R_EDI]); + wreg(cpu_state->hvf->fd, HV_X86_R8, env->regs[8]); + wreg(cpu_state->hvf->fd, HV_X86_R9, env->regs[9]); + wreg(cpu_state->hvf->fd, HV_X86_R10, env->regs[10]); + wreg(cpu_state->hvf->fd, HV_X86_R11, env->regs[11]); + wreg(cpu_state->hvf->fd, HV_X86_R12, env->regs[12]); + wreg(cpu_state->hvf->fd, HV_X86_R13, env->regs[13]); + wreg(cpu_state->hvf->fd, HV_X86_R14, env->regs[14]); + wreg(cpu_state->hvf->fd, HV_X86_R15, env->regs[15]); + wreg(cpu_state->hvf->fd, HV_X86_RFLAGS, env->eflags); + wreg(cpu_state->hvf->fd, HV_X86_RIP, env->eip); - wreg(cpu_state->hvf_fd, HV_X86_XCR0, env->xcr0); + wreg(cpu_state->hvf->fd, HV_X86_XCR0, env->xcr0); hvf_put_xsave(cpu_state); @@ -XXX,XX +XXX,XX @@ int hvf_put_registers(CPUState *cpu_state) hvf_put_msrs(cpu_state); - wreg(cpu_state->hvf_fd, HV_X86_DR0, env->dr[0]); - wreg(cpu_state->hvf_fd, HV_X86_DR1, env->dr[1]); - wreg(cpu_state->hvf_fd, HV_X86_DR2, env->dr[2]); - wreg(cpu_state->hvf_fd, HV_X86_DR3, env->dr[3]); - wreg(cpu_state->hvf_fd, HV_X86_DR4, env->dr[4]); - wreg(cpu_state->hvf_fd, HV_X86_DR5, env->dr[5]); - wreg(cpu_state->hvf_fd, HV_X86_DR6, env->dr[6]); - wreg(cpu_state->hvf_fd, HV_X86_DR7, env->dr[7]); + wreg(cpu_state->hvf->fd, HV_X86_DR0, env->dr[0]); + wreg(cpu_state->hvf->fd, HV_X86_DR1, env->dr[1]); + wreg(cpu_state->hvf->fd, HV_X86_DR2, env->dr[2]); + wreg(cpu_state->hvf->fd, HV_X86_DR3, env->dr[3]); + wreg(cpu_state->hvf->fd, HV_X86_DR4, env->dr[4]); + wreg(cpu_state->hvf->fd, HV_X86_DR5, env->dr[5]); + wreg(cpu_state->hvf->fd, HV_X86_DR6, env->dr[6]); + wreg(cpu_state->hvf->fd, HV_X86_DR7, env->dr[7]); return 0; } @@ -XXX,XX +XXX,XX @@ int hvf_get_registers(CPUState *cpu_state) X86CPU *x86cpu = X86_CPU(cpu_state); CPUX86State *env = &x86cpu->env; - env->regs[R_EAX] = rreg(cpu_state->hvf_fd, HV_X86_RAX); - env->regs[R_EBX] = rreg(cpu_state->hvf_fd, HV_X86_RBX); - env->regs[R_ECX] = rreg(cpu_state->hvf_fd, HV_X86_RCX); - env->regs[R_EDX] = rreg(cpu_state->hvf_fd, HV_X86_RDX); - env->regs[R_EBP] = rreg(cpu_state->hvf_fd, HV_X86_RBP); - env->regs[R_ESP] = rreg(cpu_state->hvf_fd, HV_X86_RSP); - env->regs[R_ESI] = rreg(cpu_state->hvf_fd, HV_X86_RSI); - env->regs[R_EDI] = rreg(cpu_state->hvf_fd, HV_X86_RDI); - env->regs[8] = rreg(cpu_state->hvf_fd, HV_X86_R8); - env->regs[9] = rreg(cpu_state->hvf_fd, HV_X86_R9); - env->regs[10] = rreg(cpu_state->hvf_fd, HV_X86_R10); - env->regs[11] = rreg(cpu_state->hvf_fd, HV_X86_R11); - env->regs[12] = rreg(cpu_state->hvf_fd, HV_X86_R12); - env->regs[13] = rreg(cpu_state->hvf_fd, HV_X86_R13); - env->regs[14] = rreg(cpu_state->hvf_fd, HV_X86_R14); - env->regs[15] = rreg(cpu_state->hvf_fd, HV_X86_R15); + env->regs[R_EAX] = rreg(cpu_state->hvf->fd, HV_X86_RAX); + env->regs[R_EBX] = rreg(cpu_state->hvf->fd, HV_X86_RBX); + env->regs[R_ECX] = rreg(cpu_state->hvf->fd, HV_X86_RCX); + env->regs[R_EDX] = rreg(cpu_state->hvf->fd, HV_X86_RDX); + env->regs[R_EBP] = rreg(cpu_state->hvf->fd, HV_X86_RBP); + env->regs[R_ESP] = rreg(cpu_state->hvf->fd, HV_X86_RSP); + env->regs[R_ESI] = rreg(cpu_state->hvf->fd, HV_X86_RSI); + env->regs[R_EDI] = rreg(cpu_state->hvf->fd, HV_X86_RDI); + env->regs[8] = rreg(cpu_state->hvf->fd, HV_X86_R8); + env->regs[9] = rreg(cpu_state->hvf->fd, HV_X86_R9); + env->regs[10] = rreg(cpu_state->hvf->fd, HV_X86_R10); + env->regs[11] = rreg(cpu_state->hvf->fd, HV_X86_R11); + env->regs[12] = rreg(cpu_state->hvf->fd, HV_X86_R12); + env->regs[13] = rreg(cpu_state->hvf->fd, HV_X86_R13); + env->regs[14] = rreg(cpu_state->hvf->fd, HV_X86_R14); + env->regs[15] = rreg(cpu_state->hvf->fd, HV_X86_R15); - env->eflags = rreg(cpu_state->hvf_fd, HV_X86_RFLAGS); - env->eip = rreg(cpu_state->hvf_fd, HV_X86_RIP); + env->eflags = rreg(cpu_state->hvf->fd, HV_X86_RFLAGS); + env->eip = rreg(cpu_state->hvf->fd, HV_X86_RIP); hvf_get_xsave(cpu_state); - env->xcr0 = rreg(cpu_state->hvf_fd, HV_X86_XCR0); + env->xcr0 = rreg(cpu_state->hvf->fd, HV_X86_XCR0); hvf_get_segments(cpu_state); hvf_get_msrs(cpu_state); - env->dr[0] = rreg(cpu_state->hvf_fd, HV_X86_DR0); - env->dr[1] = rreg(cpu_state->hvf_fd, HV_X86_DR1); - env->dr[2] = rreg(cpu_state->hvf_fd, HV_X86_DR2); - env->dr[3] = rreg(cpu_state->hvf_fd, HV_X86_DR3); - env->dr[4] = rreg(cpu_state->hvf_fd, HV_X86_DR4); - env->dr[5] = rreg(cpu_state->hvf_fd, HV_X86_DR5); - env->dr[6] = rreg(cpu_state->hvf_fd, HV_X86_DR6); - env->dr[7] = rreg(cpu_state->hvf_fd, HV_X86_DR7); + env->dr[0] = rreg(cpu_state->hvf->fd, HV_X86_DR0); + env->dr[1] = rreg(cpu_state->hvf->fd, HV_X86_DR1); + env->dr[2] = rreg(cpu_state->hvf->fd, HV_X86_DR2); + env->dr[3] = rreg(cpu_state->hvf->fd, HV_X86_DR3); + env->dr[4] = rreg(cpu_state->hvf->fd, HV_X86_DR4); + env->dr[5] = rreg(cpu_state->hvf->fd, HV_X86_DR5); + env->dr[6] = rreg(cpu_state->hvf->fd, HV_X86_DR6); + env->dr[7] = rreg(cpu_state->hvf->fd, HV_X86_DR7); x86_update_hflags(env); return 0; @@ -XXX,XX +XXX,XX @@ int hvf_get_registers(CPUState *cpu_state) static void vmx_set_int_window_exiting(CPUState *cpu) { uint64_t val; - val = rvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS); - wvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS, val | + val = rvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS); + wvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS, val | VMCS_PRI_PROC_BASED_CTLS_INT_WINDOW_EXITING); } void vmx_clear_int_window_exiting(CPUState *cpu) { uint64_t val; - val = rvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS); - wvmcs(cpu->hvf_fd, VMCS_PRI_PROC_BASED_CTLS, val & + val = rvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS); + wvmcs(cpu->hvf->fd, VMCS_PRI_PROC_BASED_CTLS, val & ~VMCS_PRI_PROC_BASED_CTLS_INT_WINDOW_EXITING); } @@ -XXX,XX +XXX,XX @@ bool hvf_inject_interrupts(CPUState *cpu_state) uint64_t info = 0; if (have_event) { info = vector | intr_type | VMCS_INTR_VALID; - uint64_t reason = rvmcs(cpu_state->hvf_fd, VMCS_EXIT_REASON); + uint64_t reason = rvmcs(cpu_state->hvf->fd, VMCS_EXIT_REASON); if (env->nmi_injected && reason != EXIT_REASON_TASK_SWITCH) { vmx_clear_nmi_blocking(cpu_state); } @@ -XXX,XX +XXX,XX @@ bool hvf_inject_interrupts(CPUState *cpu_state) info &= ~(1 << 12); /* clear undefined bit */ if (intr_type == VMCS_INTR_T_SWINTR || intr_type == VMCS_INTR_T_SWEXCEPTION) { - wvmcs(cpu_state->hvf_fd, VMCS_ENTRY_INST_LENGTH, env->ins_len); + wvmcs(cpu_state->hvf->fd, VMCS_ENTRY_INST_LENGTH, env->ins_len); } if (env->has_error_code) { - wvmcs(cpu_state->hvf_fd, VMCS_ENTRY_EXCEPTION_ERROR, + wvmcs(cpu_state->hvf->fd, VMCS_ENTRY_EXCEPTION_ERROR, env->error_code); /* Indicate that VMCS_ENTRY_EXCEPTION_ERROR is valid */ info |= VMCS_INTR_DEL_ERRCODE; } /*printf("reinject %lx err %d\n", info, err);*/ - wvmcs(cpu_state->hvf_fd, VMCS_ENTRY_INTR_INFO, info); + wvmcs(cpu_state->hvf->fd, VMCS_ENTRY_INTR_INFO, info); }; } @@ -XXX,XX +XXX,XX @@ bool hvf_inject_interrupts(CPUState *cpu_state) if (!(env->hflags2 & HF2_NMI_MASK) && !(info & VMCS_INTR_VALID)) { cpu_state->interrupt_request &= ~CPU_INTERRUPT_NMI; info = VMCS_INTR_VALID | VMCS_INTR_T_NMI | EXCP02_NMI; - wvmcs(cpu_state->hvf_fd, VMCS_ENTRY_INTR_INFO, info); + wvmcs(cpu_state->hvf->fd, VMCS_ENTRY_INTR_INFO, info); } else { vmx_set_nmi_window_exiting(cpu_state); } @@ -XXX,XX +XXX,XX @@ bool hvf_inject_interrupts(CPUState *cpu_state) int line = cpu_get_pic_interrupt(&x86cpu->env); cpu_state->interrupt_request &= ~CPU_INTERRUPT_HARD; if (line >= 0) { - wvmcs(cpu_state->hvf_fd, VMCS_ENTRY_INTR_INFO, line | + wvmcs(cpu_state->hvf->fd, VMCS_ENTRY_INTR_INFO, line | VMCS_INTR_VALID | VMCS_INTR_T_HWINTR); } } @@ -XXX,XX +XXX,XX @@ int hvf_process_events(CPUState *cpu_state) X86CPU *cpu = X86_CPU(cpu_state); CPUX86State *env = &cpu->env; - env->eflags = rreg(cpu_state->hvf_fd, HV_X86_RFLAGS); + env->eflags = rreg(cpu_state->hvf->fd, HV_X86_RFLAGS); if (cpu_state->interrupt_request & CPU_INTERRUPT_INIT) { cpu_synchronize_state(cpu_state); -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> The hooks we have that call us after reset, init and loadvm really all just want to say "The reference of all register state is in the QEMU vcpu struct, please push it". We already have a working pushing mechanism though called cpu->vcpu_dirty, so we can just reuse that for all of the above, syncing state properly the next time we actually execute a vCPU. This fixes PSCI resets on ARM, as they modify CPU state even after the post init call has completed, but before we execute the vCPU again. To also make the scheme work for x86, we have to make sure we don't move stale eflags into our env when the vcpu state is dirty. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210519202253.76782-13-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- accel/hvf/hvf-accel-ops.c | 27 +++++++-------------------- target/i386/hvf/x86hvf.c | 5 ++++- 2 files changed, 11 insertions(+), 21 deletions(-) diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c index XXXXXXX..XXXXXXX 100644 --- a/accel/hvf/hvf-accel-ops.c +++ b/accel/hvf/hvf-accel-ops.c @@ -XXX,XX +XXX,XX @@ static void hvf_cpu_synchronize_state(CPUState *cpu) } } -static void do_hvf_cpu_synchronize_post_reset(CPUState *cpu, - run_on_cpu_data arg) +static void do_hvf_cpu_synchronize_set_dirty(CPUState *cpu, + run_on_cpu_data arg) { - hvf_put_registers(cpu); - cpu->vcpu_dirty = false; + /* QEMU state is the reference, push it to HVF now and on next entry */ + cpu->vcpu_dirty = true; } static void hvf_cpu_synchronize_post_reset(CPUState *cpu) { - run_on_cpu(cpu, do_hvf_cpu_synchronize_post_reset, RUN_ON_CPU_NULL); -} - -static void do_hvf_cpu_synchronize_post_init(CPUState *cpu, - run_on_cpu_data arg) -{ - hvf_put_registers(cpu); - cpu->vcpu_dirty = false; + run_on_cpu(cpu, do_hvf_cpu_synchronize_set_dirty, RUN_ON_CPU_NULL); } static void hvf_cpu_synchronize_post_init(CPUState *cpu) { - run_on_cpu(cpu, do_hvf_cpu_synchronize_post_init, RUN_ON_CPU_NULL); -} - -static void do_hvf_cpu_synchronize_pre_loadvm(CPUState *cpu, - run_on_cpu_data arg) -{ - cpu->vcpu_dirty = true; + run_on_cpu(cpu, do_hvf_cpu_synchronize_set_dirty, RUN_ON_CPU_NULL); } static void hvf_cpu_synchronize_pre_loadvm(CPUState *cpu) { - run_on_cpu(cpu, do_hvf_cpu_synchronize_pre_loadvm, RUN_ON_CPU_NULL); + run_on_cpu(cpu, do_hvf_cpu_synchronize_set_dirty, RUN_ON_CPU_NULL); } static void hvf_set_dirty_tracking(MemoryRegionSection *section, bool on) diff --git a/target/i386/hvf/x86hvf.c b/target/i386/hvf/x86hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hvf/x86hvf.c +++ b/target/i386/hvf/x86hvf.c @@ -XXX,XX +XXX,XX @@ int hvf_process_events(CPUState *cpu_state) X86CPU *cpu = X86_CPU(cpu_state); CPUX86State *env = &cpu->env; - env->eflags = rreg(cpu_state->hvf->fd, HV_X86_RFLAGS); + if (!cpu_state->vcpu_dirty) { + /* light weight sync for CPU_INTERRUPT_HARD and IF_MASK */ + env->eflags = rreg(cpu_state->hvf->fd, HV_X86_RFLAGS); + } if (cpu_state->interrupt_request & CPU_INTERRUPT_INIT) { cpu_synchronize_state(cpu_state); -- 2.20.1 Coverity notes that we don't check for dup2() failing. Add some assertions so that if it does ever happen we get some indication. (This is similar to how we handle other "don't expect this syscall to fail" checks in this test code.) Fixes: Coverity CID 1432346 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-id: 20210525134458.6675-2-peter.maydell@linaro.org --- tests/qtest/bios-tables-test.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ static void test_acpi_asl(test_data *data) exp_sdt->asl_file, sdt->asl_file); int out = dup(STDOUT_FILENO); int ret G_GNUC_UNUSED; + int dupret; - dup2(STDERR_FILENO, STDOUT_FILENO); + g_assert(out >= 0); + dupret = dup2(STDERR_FILENO, STDOUT_FILENO); + g_assert(dupret >= 0); ret = system(diff) ; - dup2(out, STDOUT_FILENO); + dupret = dup2(out, STDOUT_FILENO); + g_assert(dupret >= 0); close(out); g_free(diff); } -- 2.20.1 The e1000e_send_verify() test calls qemu_recv() but doesn't check that the call succeeded, which annoys Coverity. Add an explicit test check for the length of the data. (This is a test check, not a "we assume this syscall always succeeds", so we use g_assert_cmpint() rather than g_assert().) Fixes: Coverity CID 1432324 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-id: 20210525134458.6675-3-peter.maydell@linaro.org --- tests/qtest/e1000e-test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tests/qtest/e1000e-test.c b/tests/qtest/e1000e-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/e1000e-test.c +++ b/tests/qtest/e1000e-test.c @@ -XXX,XX +XXX,XX @@ static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *a /* Check data sent to the backend */ ret = qemu_recv(test_sockets[0], &recv_len, sizeof(recv_len), 0); g_assert_cmpint(ret, == , sizeof(recv_len)); - qemu_recv(test_sockets[0], buffer, 64, 0); + ret = qemu_recv(test_sockets[0], buffer, 64, 0); + g_assert_cmpint(ret, >=, 5); g_assert_cmpstr(buffer, == , "TEST"); /* Free test data buffer */ -- 2.20.1 Coverity notices that the checks against mkstemp() failing in create_qcow2_with_mbr() are wrong: mkstemp returns -1 on failure but the check is just "g_assert(fd)". Fix to use "g_assert(fd >= 0)", matching the correct check in create_test_img(). Fixes: Coverity CID 1432274 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-id: 20210525134458.6675-4-peter.maydell@linaro.org --- tests/qtest/hd-geo-test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/hd-geo-test.c b/tests/qtest/hd-geo-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/hd-geo-test.c +++ b/tests/qtest/hd-geo-test.c @@ -XXX,XX +XXX,XX @@ static char *create_qcow2_with_mbr(MBRpartitions mbr, uint64_t sectors) } fd = mkstemp(raw_path); - g_assert(fd); + g_assert(fd >= 0); close(fd); fd = open(raw_path, O_WRONLY); @@ -XXX,XX +XXX,XX @@ static char *create_qcow2_with_mbr(MBRpartitions mbr, uint64_t sectors) close(fd); fd = mkstemp(qcow2_path); - g_assert(fd); + g_assert(fd >= 0); close(fd); qemu_img_path = getenv("QTEST_QEMU_IMG"); -- 2.20.1 Coverity points out that we calculate a 64-bit value using 32-bit arithmetic; add the cast to force the multiply to be done as 64-bits. (The overflow will never happen with the current test data.) Fixes: Coverity CID 1432320 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-id: 20210525134458.6675-5-peter.maydell@linaro.org --- tests/qtest/pflash-cfi02-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/qtest/pflash-cfi02-test.c b/tests/qtest/pflash-cfi02-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/pflash-cfi02-test.c +++ b/tests/qtest/pflash-cfi02-test.c @@ -XXX,XX +XXX,XX @@ static void test_geometry(const void *opaque) for (int region = 0; region < nb_erase_regions; ++region) { for (uint32_t i = 0; i < c->nb_blocs[region]; ++i) { - uint64_t byte_addr = i * c->sector_len[region]; + uint64_t byte_addr = (uint64_t)i * c->sector_len[region]; g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c)); } } -- 2.20.1 Coverity points out that in tpm_test_swtpm_migration_test() we assume that src_tpm_addr and dst_tpm_addr are non-NULL (we pass them to tpm_util_migration_start_qemu() which will unconditionally dereference them) but then later explicitly check them for NULL. Remove the pointless checks. Fixes: Coverity CID 1432367, 1432359 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-id: 20210525134458.6675-6-peter.maydell@linaro.org --- tests/qtest/tpm-tests.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/tests/qtest/tpm-tests.c b/tests/qtest/tpm-tests.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/tpm-tests.c +++ b/tests/qtest/tpm-tests.c @@ -XXX,XX +XXX,XX @@ void tpm_test_swtpm_migration_test(const char *src_tpm_path, qtest_quit(src_qemu); tpm_util_swtpm_kill(dst_tpm_pid); - if (dst_tpm_addr) { - g_unlink(dst_tpm_addr->u.q_unix.path); - qapi_free_SocketAddress(dst_tpm_addr); - } + g_unlink(dst_tpm_addr->u.q_unix.path); + qapi_free_SocketAddress(dst_tpm_addr); tpm_util_swtpm_kill(src_tpm_pid); - if (src_tpm_addr) { - g_unlink(src_tpm_addr->u.q_unix.path); - qapi_free_SocketAddress(src_tpm_addr); - } + g_unlink(src_tpm_addr->u.q_unix.path); + qapi_free_SocketAddress(src_tpm_addr); } -- 2.20.1 Coverity complains that we don't check for failures from dup() and mkstemp(); add asserts that these syscalls succeeded. Fixes: Coverity CID 1432516, 1432574 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210525134458.6675-7-peter.maydell@linaro.org --- tests/unit/test-vmstate.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tests/unit/test-vmstate.c b/tests/unit/test-vmstate.c index XXXXXXX..XXXXXXX 100644 --- a/tests/unit/test-vmstate.c +++ b/tests/unit/test-vmstate.c @@ -XXX,XX +XXX,XX @@ static int temp_fd; /* Duplicate temp_fd and seek to the beginning of the file */ static QEMUFile *open_test_file(bool write) { - int fd = dup(temp_fd); + int fd; QIOChannel *ioc; QEMUFile *f; + fd = dup(temp_fd); + g_assert(fd >= 0); lseek(fd, 0, SEEK_SET); if (write) { g_assert_cmpint(ftruncate(fd, 0), ==, 0); @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) g_autofree char *temp_file = g_strdup_printf("%s/vmst.test.XXXXXX", g_get_tmp_dir()); temp_fd = mkstemp(temp_file); + g_assert(temp_fd >= 0); module_call_init(MODULE_INIT_QOM); -- 2.20.1