The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 Another go at the v8.5-MemTag linux-user support, plus a couple more npcm7xx devices. -- PMM The following changes since commit 8ba4bca570ace1e60614a0808631a517cf5df67a: Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2021-02-15 17:13:57 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210216 for you to fetch changes up to 64fd5bddf3b71d1b92b55382ab39768bd87ecfbd: tests/qtests: Add npcm7xx emc model test (2021-02-16 14:27:05 +0000) ---------------------------------------------------------------- target-arm queue: * Support ARMv8.5-MemTag for linux-user * ncpm7xx: Support SMBus, EMC ethernet devices * MAINTAINERS: add section for Clock framework ---------------------------------------------------------------- Doug Evans (3): hw/net: Add npcm7xx emc model hw/arm: Add npcm7xx emc model tests/qtests: Add npcm7xx emc model test Hao Wu (5): hw/i2c: Implement NPCM7XX SMBus Module Single Mode hw/arm: Add I2C sensors for NPCM750 eval board hw/arm: Add I2C sensors and EEPROM for GSJ machine hw/i2c: Add a QTest for NPCM7XX SMBus Device hw/i2c: Implement NPCM7XX SMBus Module FIFO Mode Luc Michel (1): MAINTAINERS: add myself maintainer for the clock framework Richard Henderson (31): tcg: Introduce target-specific page data for user-only linux-user: Introduce PAGE_ANON exec: Use uintptr_t for guest_base exec: Use uintptr_t in cpu_ldst.h exec: Improve types for guest_addr_valid linux-user: Check for overflow in access_ok linux-user: Tidy VERIFY_READ/VERIFY_WRITE bsd-user: Tidy VERIFY_READ/VERIFY_WRITE linux-user: Do not use guest_addr_valid for h2g_valid linux-user: Fix guest_addr_valid vs reserved_va exec: Introduce cpu_untagged_addr exec: Use cpu_untagged_addr in g2h; split out g2h_untagged linux-user: Explicitly untag memory management syscalls linux-user: Use guest_range_valid in access_ok exec: Rename guest_{addr,range}_valid to *_untagged linux-user: Use cpu_untagged_addr in access_ok; split out *_untagged linux-user: Move lock_user et al out of line linux-user: Fix types in uaccess.c linux-user: Handle tags in lock_user/unlock_user linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE target/arm: Improve gen_top_byte_ignore target/arm: Use the proper TBI settings for linux-user linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAG linux-user/aarch64: Implement PROT_MTE target/arm: Split out syndrome.h from internals.h linux-user/aarch64: Pass syndrome to EXC_*_ABORT linux-user/aarch64: Signal SEGV_MTESERR for sync tag check fault linux-user/aarch64: Signal SEGV_MTEAERR for async tag check error target/arm: Add allocation tag storage for user mode target/arm: Enable MTE for user-only tests/tcg/aarch64: Add mte smoke tests docs/system/arm/nuvoton.rst | 5 +- bsd-user/qemu.h | 17 +- include/exec/cpu-all.h | 47 +- include/exec/cpu_ldst.h | 39 +- include/exec/exec-all.h | 2 +- include/hw/arm/npcm7xx.h | 4 + include/hw/i2c/npcm7xx_smbus.h | 113 ++++ include/hw/net/npcm7xx_emc.h | 286 +++++++++ linux-user/aarch64/target_signal.h | 3 + linux-user/aarch64/target_syscall.h | 13 + linux-user/qemu.h | 76 +-- linux-user/syscall_defs.h | 1 + target/arm/cpu-param.h | 3 + target/arm/cpu.h | 32 + target/arm/internals.h | 249 +------- target/arm/syndrome.h | 273 +++++++++ tests/tcg/aarch64/mte.h | 60 ++ accel/tcg/translate-all.c | 32 +- accel/tcg/user-exec.c | 51 +- bsd-user/elfload.c | 2 +- bsd-user/main.c | 8 +- bsd-user/mmap.c | 23 +- hw/arm/npcm7xx.c | 118 +++- hw/arm/npcm7xx_boards.c | 46 ++ hw/i2c/npcm7xx_smbus.c | 1099 +++++++++++++++++++++++++++++++++++ hw/net/npcm7xx_emc.c | 857 +++++++++++++++++++++++++++ linux-user/aarch64/cpu_loop.c | 38 +- linux-user/elfload.c | 18 +- linux-user/flatload.c | 2 +- linux-user/hppa/cpu_loop.c | 39 +- linux-user/i386/cpu_loop.c | 6 +- linux-user/i386/signal.c | 5 +- linux-user/main.c | 4 +- linux-user/mmap.c | 88 +-- linux-user/ppc/signal.c | 4 +- linux-user/syscall.c | 165 ++++-- linux-user/uaccess.c | 82 ++- target/arm/cpu.c | 25 +- target/arm/helper-a64.c | 4 +- target/arm/mte_helper.c | 39 +- target/arm/tlb_helper.c | 15 +- target/arm/translate-a64.c | 25 +- target/hppa/op_helper.c | 2 +- target/i386/tcg/mem_helper.c | 2 +- target/s390x/mem_helper.c | 4 +- tests/qtest/npcm7xx_emc-test.c | 862 +++++++++++++++++++++++++++ tests/qtest/npcm7xx_smbus-test.c | 495 ++++++++++++++++ tests/tcg/aarch64/mte-1.c | 28 + tests/tcg/aarch64/mte-2.c | 45 ++ tests/tcg/aarch64/mte-3.c | 51 ++ tests/tcg/aarch64/mte-4.c | 45 ++ tests/tcg/aarch64/pauth-2.c | 1 - MAINTAINERS | 11 + hw/arm/Kconfig | 1 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 12 + hw/net/meson.build | 1 + hw/net/trace-events | 17 + tests/qtest/meson.build | 2 + tests/tcg/aarch64/Makefile.target | 6 + tests/tcg/configure.sh | 4 + 61 files changed, 5052 insertions(+), 556 deletions(-) create mode 100644 include/hw/i2c/npcm7xx_smbus.h create mode 100644 include/hw/net/npcm7xx_emc.h create mode 100644 target/arm/syndrome.h create mode 100644 tests/tcg/aarch64/mte.h create mode 100644 hw/i2c/npcm7xx_smbus.c create mode 100644 hw/net/npcm7xx_emc.c create mode 100644 tests/qtest/npcm7xx_emc-test.c create mode 100644 tests/qtest/npcm7xx_smbus-test.c create mode 100644 tests/tcg/aarch64/mte-1.c create mode 100644 tests/tcg/aarch64/mte-2.c create mode 100644 tests/tcg/aarch64/mte-3.c create mode 100644 tests/tcg/aarch64/mte-4.c From: Richard Henderson <richard.henderson@linaro.org> This data can be allocated by page_alloc_target_data() and released by page_set_flags(start, end, prot | PAGE_RESET). This data will be used to hold tag memory for AArch64 MTE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 42 +++++++++++++++++++++++++++++++++------ accel/tcg/translate-all.c | 28 ++++++++++++++++++++++++++ linux-user/mmap.c | 4 +++- linux-user/syscall.c | 4 ++-- 4 files changed, 69 insertions(+), 9 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; #define PAGE_EXEC 0x0004 #define PAGE_BITS (PAGE_READ | PAGE_WRITE | PAGE_EXEC) #define PAGE_VALID 0x0008 -/* original state of the write flag (used when tracking self-modifying - code */ +/* + * Original state of the write flag (used when tracking self-modifying code) + */ #define PAGE_WRITE_ORG 0x0010 -/* Invalidate the TLB entry immediately, helpful for s390x - * Low-Address-Protection. Used with PAGE_WRITE in tlb_set_page_with_attrs() */ -#define PAGE_WRITE_INV 0x0040 +/* + * Invalidate the TLB entry immediately, helpful for s390x + * Low-Address-Protection. Used with PAGE_WRITE in tlb_set_page_with_attrs() + */ +#define PAGE_WRITE_INV 0x0020 +/* For use with page_set_flags: page is being replaced; target_data cleared. */ +#define PAGE_RESET 0x0040 + #if defined(CONFIG_BSD) && defined(CONFIG_USER_ONLY) /* FIXME: Code that sets/uses this is broken and needs to go away. */ -#define PAGE_RESERVED 0x0020 +#define PAGE_RESERVED 0x0100 #endif /* Target-specific bits that will be used via page_get_flags(). */ #define PAGE_TARGET_1 0x0080 @@ -XXX,XX +XXX,XX @@ int walk_memory_regions(void *, walk_memory_regions_fn); int page_get_flags(target_ulong address); void page_set_flags(target_ulong start, target_ulong end, int flags); int page_check_range(target_ulong start, target_ulong len, int flags); + +/** + * page_alloc_target_data(address, size) + * @address: guest virtual address + * @size: size of data to allocate + * + * Allocate @size bytes of out-of-band data to associate with the + * guest page at @address. If the page is not mapped, NULL will + * be returned. If there is existing data associated with @address, + * no new memory will be allocated. + * + * The memory will be freed when the guest page is deallocated, + * e.g. with the munmap system call. + */ +void *page_alloc_target_data(target_ulong address, size_t size); + +/** + * page_get_target_data(address) + * @address: guest virtual address + * + * Return any out-of-bound memory assocated with the guest page + * at @address, as per page_alloc_target_data. + */ +void *page_get_target_data(target_ulong address); #endif CPUArchState *cpu_copy(CPUArchState *env); diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ typedef struct PageDesc { unsigned int code_write_count; #else unsigned long flags; + void *target_data; #endif #ifndef CONFIG_USER_ONLY QemuSpin lock; @@ -XXX,XX +XXX,XX @@ int page_get_flags(target_ulong address) void page_set_flags(target_ulong start, target_ulong end, int flags) { target_ulong addr, len; + bool reset_target_data; /* This function should never be called with addresses outside the guest address space. If this assert fires, it probably indicates @@ -XXX,XX +XXX,XX @@ void page_set_flags(target_ulong start, target_ulong end, int flags) if (flags & PAGE_WRITE) { flags |= PAGE_WRITE_ORG; } + reset_target_data = !(flags & PAGE_VALID) || (flags & PAGE_RESET); + flags &= ~PAGE_RESET; for (addr = start, len = end - start; len != 0; @@ -XXX,XX +XXX,XX @@ void page_set_flags(target_ulong start, target_ulong end, int flags) p->first_tb) { tb_invalidate_phys_page(addr, 0); } + if (reset_target_data && p->target_data) { + g_free(p->target_data); + p->target_data = NULL; + } p->flags = flags; } } +void *page_get_target_data(target_ulong address) +{ + PageDesc *p = page_find(address >> TARGET_PAGE_BITS); + return p ? p->target_data : NULL; +} + +void *page_alloc_target_data(target_ulong address, size_t size) +{ + PageDesc *p = page_find(address >> TARGET_PAGE_BITS); + void *ret = NULL; + + if (p->flags & PAGE_VALID) { + ret = p->target_data; + if (!ret) { + p->target_data = ret = g_malloc0(size); + } + } + return ret; +} + int page_check_range(target_ulong start, target_ulong len, int flags) { PageDesc *p; diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, } } the_end1: + page_flags |= PAGE_RESET; page_set_flags(start, start + len, page_flags); the_end: trace_target_mmap_complete(start); @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, new_addr = h2g(host_addr); prot = page_get_flags(old_addr); page_set_flags(old_addr, old_addr + old_size, 0); - page_set_flags(new_addr, new_addr + new_size, prot | PAGE_VALID); + page_set_flags(new_addr, new_addr + new_size, + prot | PAGE_VALID | PAGE_RESET); } tb_invalidate_phys_range(new_addr, new_addr + new_size); mmap_unlock(); diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, raddr=h2g((unsigned long)host_raddr); page_set_flags(raddr, raddr + shm_info.shm_segsz, - PAGE_VALID | PAGE_READ | - ((shmflg & SHM_RDONLY)? 0 : PAGE_WRITE)); + PAGE_VALID | PAGE_RESET | PAGE_READ | + (shmflg & SHM_RDONLY ? 0 : PAGE_WRITE)); for (i = 0; i < N_SHM_REGIONS; i++) { if (!shm_regions[i].in_use) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Record whether the backing page is anonymous, or if it has file backing. This will allow us to get close to the Linux AArch64 ABI for MTE, which allows tag memory only on ram-backed VMAs. The real ABI allows tag memory on files, when those files are on ram-backed filesystems, such as tmpfs. We will not be able to implement that in QEMU linux-user. Thankfully, anonymous memory for malloc arenas is the primary consumer of this feature, so this restricted version should still be of use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 2 ++ linux-user/mmap.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; #define PAGE_WRITE_INV 0x0020 /* For use with page_set_flags: page is being replaced; target_data cleared. */ #define PAGE_RESET 0x0040 +/* For linux-user, indicates that the page is MAP_ANON. */ +#define PAGE_ANON 0x0080 #if defined(CONFIG_BSD) && defined(CONFIG_USER_ONLY) /* FIXME: Code that sets/uses this is broken and needs to go away. */ diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, } } the_end1: + if (flags & MAP_ANONYMOUS) { + page_flags |= PAGE_ANON; + } page_flags |= PAGE_RESET; page_set_flags(start, start + len, page_flags); the_end: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is more descriptive than 'unsigned long'. No functional change, since these match on all linux+bsd hosts. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 2 +- bsd-user/main.c | 4 ++-- linux-user/elfload.c | 4 ++-- linux-user/main.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ static inline void tswap64s(uint64_t *s) /* On some host systems the guest address space is reserved on the host. * This allows the guest address space to be offset to a convenient location. */ -extern unsigned long guest_base; +extern uintptr_t guest_base; extern bool have_guest_base; extern unsigned long reserved_va; diff --git a/bsd-user/main.c b/bsd-user/main.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/main.c +++ b/bsd-user/main.c @@ -XXX,XX +XXX,XX @@ int singlestep; unsigned long mmap_min_addr; -unsigned long guest_base; +uintptr_t guest_base; bool have_guest_base; unsigned long reserved_va; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) g_free(target_environ); if (qemu_loglevel_mask(CPU_LOG_PAGE)) { - qemu_log("guest_base 0x%lx\n", guest_base); + qemu_log("guest_base %p\n", (void *)guest_base); log_page_dump("binary load"); qemu_log("start_brk 0x" TARGET_ABI_FMT_lx "\n", info->start_brk); diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void pgb_have_guest_base(const char *image_name, abi_ulong guest_loaddr, void *addr, *test; if (!QEMU_IS_ALIGNED(guest_base, align)) { - fprintf(stderr, "Requested guest base 0x%lx does not satisfy " + fprintf(stderr, "Requested guest base %p does not satisfy " "host minimum alignment (0x%lx)\n", - guest_base, align); + (void *)guest_base, align); exit(EXIT_FAILURE); } diff --git a/linux-user/main.c b/linux-user/main.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/main.c +++ b/linux-user/main.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_model; static const char *cpu_type; static const char *seed_optarg; unsigned long mmap_min_addr; -unsigned long guest_base; +uintptr_t guest_base; bool have_guest_base; /* @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv, char **envp) g_free(target_environ); if (qemu_loglevel_mask(CPU_LOG_PAGE)) { - qemu_log("guest_base 0x%lx\n", guest_base); + qemu_log("guest_base %p\n", (void *)guest_base); log_page_dump("binary load"); qemu_log("start_brk 0x" TARGET_ABI_FMT_lx "\n", info->start_brk); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is more descriptive than 'unsigned long'. No functional change, since these match on all linux+bsd hosts. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; #endif /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ -#define g2h(x) ((void *)((unsigned long)(abi_ptr)(x) + guest_base)) +#define g2h(x) ((void *)((uintptr_t)(abi_ptr)(x) + guest_base)) #if HOST_LONG_BITS <= TARGET_VIRT_ADDR_SPACE_BITS #define guest_addr_valid(x) (1) #else #define guest_addr_valid(x) ((x) <= GUEST_ADDR_MAX) #endif -#define h2g_valid(x) guest_addr_valid((unsigned long)(x) - guest_base) +#define h2g_valid(x) guest_addr_valid((uintptr_t)(x) - guest_base) static inline int guest_range_valid(unsigned long start, unsigned long len) { @@ -XXX,XX +XXX,XX @@ static inline int guest_range_valid(unsigned long start, unsigned long len) } #define h2g_nocheck(x) ({ \ - unsigned long __ret = (unsigned long)(x) - guest_base; \ + uintptr_t __ret = (uintptr_t)(x) - guest_base; \ (abi_ptr)__ret; \ }) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Return bool not int; pass abi_ulong not 'unsigned long'. All callers use abi_ulong already, so the change in type has no effect. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; #endif #define h2g_valid(x) guest_addr_valid((uintptr_t)(x) - guest_base) -static inline int guest_range_valid(unsigned long start, unsigned long len) +static inline bool guest_range_valid(abi_ulong start, abi_ulong len) { return len - 1 <= GUEST_ADDR_MAX && start <= GUEST_ADDR_MAX - len + 1; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Verify that addr + size - 1 does not wrap around. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; #define VERIFY_READ 0 #define VERIFY_WRITE 1 /* implies read access */ -static inline int access_ok(int type, abi_ulong addr, abi_ulong size) +static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { - return guest_addr_valid(addr) && - (size == 0 || guest_addr_valid(addr + size - 1)) && - page_check_range((target_ulong)addr, size, - (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0; + if (!guest_addr_valid(addr)) { + return false; + } + if (size != 0 && + (addr + size - 1 < addr || + !guest_addr_valid(addr + size - 1))) { + return false; + } + return page_check_range((target_ulong)addr, size, + (type == VERIFY_READ) ? PAGE_READ : + (PAGE_READ | PAGE_WRITE)) == 0; } /* NOTE __get_user and __put_user use host pointers and don't check access. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These constants are only ever used with access_ok, and friends. Rather than translating them to PAGE_* bits, let them equal the PAGE_* bits to begin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; /* user access */ -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 /* implies read access */ +#define VERIFY_READ PAGE_READ +#define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { @@ -XXX,XX +XXX,XX @@ static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) !guest_addr_valid(addr + size - 1))) { return false; } - return page_check_range((target_ulong)addr, size, - (type == VERIFY_READ) ? PAGE_READ : - (PAGE_READ | PAGE_WRITE)) == 0; + return page_check_range((target_ulong)addr, size, type) == 0; } /* NOTE __get_user and __put_user use host pointers and don't check access. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These constants are only ever used with access_ok, and friends. Rather than translating them to PAGE_* bits, let them equal the PAGE_* bits to begin. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- bsd-user/qemu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/bsd-user/qemu.h b/bsd-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/qemu.h +++ b/bsd-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long x86_stack_size; /* user access */ -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 /* implies read access */ +#define VERIFY_READ PAGE_READ +#define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) -static inline int access_ok(int type, abi_ulong addr, abi_ulong size) +static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { - return page_check_range((target_ulong)addr, size, - (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0; + return page_check_range((target_ulong)addr, size, type) == 0; } /* NOTE __get_user and __put_user use host pointers and don't check access. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the only use of guest_addr_valid that does not begin with a guest address, but a host address being transformed to a guest address. We will shortly adjust guest_addr_valid to handle guest memory tags, and the host address should not be subjected to that. Move h2g_valid adjacent to the other h2g macros. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; #else #define guest_addr_valid(x) ((x) <= GUEST_ADDR_MAX) #endif -#define h2g_valid(x) guest_addr_valid((uintptr_t)(x) - guest_base) static inline bool guest_range_valid(abi_ulong start, abi_ulong len) { return len - 1 <= GUEST_ADDR_MAX && start <= GUEST_ADDR_MAX - len + 1; } +#define h2g_valid(x) \ + (HOST_LONG_BITS <= TARGET_VIRT_ADDR_SPACE_BITS || \ + (uintptr_t)(x) - guest_base <= GUEST_ADDR_MAX) + #define h2g_nocheck(x) ({ \ uintptr_t __ret = (uintptr_t)(x) - guest_base; \ (abi_ptr)__ret; \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We must always use GUEST_ADDR_MAX, because even 32-bit hosts can use -R <reserved_va> to restrict the memory address of the guest. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ #define g2h(x) ((void *)((uintptr_t)(abi_ptr)(x) + guest_base)) -#if HOST_LONG_BITS <= TARGET_VIRT_ADDR_SPACE_BITS -#define guest_addr_valid(x) (1) -#else -#define guest_addr_valid(x) ((x) <= GUEST_ADDR_MAX) -#endif +static inline bool guest_addr_valid(abi_ulong x) +{ + return x <= GUEST_ADDR_MAX; +} static inline bool guest_range_valid(abi_ulong start, abi_ulong len) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Provide an identity fallback for target that do not use tagged addresses. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; #define TARGET_ABI_FMT_ptr "%"PRIx64 #endif +#ifndef TARGET_TAGGED_ADDRESSES +static inline abi_ptr cpu_untagged_addr(CPUState *cs, abi_ptr x) +{ + return x; +} +#endif + /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ #define g2h(x) ((void *)((uintptr_t)(abi_ptr)(x) + guest_base)) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use g2h_untagged in contexts that have no cpu, e.g. the binary loaders that operate before the primary cpu is created. As a colollary, target_mmap and friends must use untagged addresses, since they are used by the loaders. Use g2h_untagged on values returned from target_mmap, as the kernel never applies a tag itself. Use g2h_untagged on all pc values. The only current user of tags, aarch64, removes tags from code addresses upon branch, so "pc" is always untagged. Use g2h with the cpu context on hand wherever possible. Use g2h_untagged in lock_user, which will be updated soon. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- bsd-user/qemu.h | 8 ++-- include/exec/cpu_ldst.h | 12 +++++- include/exec/exec-all.h | 2 +- linux-user/qemu.h | 6 +-- accel/tcg/translate-all.c | 4 +- accel/tcg/user-exec.c | 48 ++++++++++++------------ bsd-user/elfload.c | 2 +- bsd-user/main.c | 4 +- bsd-user/mmap.c | 23 ++++++------ linux-user/elfload.c | 12 +++--- linux-user/flatload.c | 2 +- linux-user/hppa/cpu_loop.c | 31 ++++++++-------- linux-user/i386/cpu_loop.c | 4 +- linux-user/mmap.c | 45 +++++++++++----------- linux-user/ppc/signal.c | 4 +- linux-user/syscall.c | 72 +++++++++++++++++++----------------- target/arm/helper-a64.c | 4 +- target/hppa/op_helper.c | 2 +- target/i386/tcg/mem_helper.c | 2 +- target/s390x/mem_helper.c | 4 +- 20 files changed, 154 insertions(+), 137 deletions(-) diff --git a/bsd-user/qemu.h b/bsd-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/qemu.h +++ b/bsd-user/qemu.h @@ -XXX,XX +XXX,XX @@ static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy void *addr; addr = g_malloc(len); if (copy) - memcpy(addr, g2h(guest_addr), len); + memcpy(addr, g2h_untagged(guest_addr), len); else memset(addr, 0, len); return addr; } #else - return g2h(guest_addr); + return g2h_untagged(guest_addr); #endif } @@ -XXX,XX +XXX,XX @@ static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, #ifdef DEBUG_REMAP if (!host_ptr) return; - if (host_ptr == g2h(guest_addr)) + if (host_ptr == g2h_untagged(guest_addr)) return; if (len > 0) - memcpy(g2h(guest_addr), host_ptr, len); + memcpy(g2h_untagged(guest_addr), host_ptr, len); g_free(host_ptr); #endif } diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ static inline abi_ptr cpu_untagged_addr(CPUState *cs, abi_ptr x) #endif /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ -#define g2h(x) ((void *)((uintptr_t)(abi_ptr)(x) + guest_base)) +static inline void *g2h_untagged(abi_ptr x) +{ + return (void *)((uintptr_t)(x) + guest_base); +} + +static inline void *g2h(CPUState *cs, abi_ptr x) +{ + return g2h_untagged(cpu_untagged_addr(cs, x)); +} static inline bool guest_addr_valid(abi_ulong x) { @@ -XXX,XX +XXX,XX @@ static inline int cpu_ldsw_code(CPUArchState *env, abi_ptr addr) static inline void *tlb_vaddr_to_host(CPUArchState *env, abi_ptr addr, MMUAccessType access_type, int mmu_idx) { - return g2h(addr); + return g2h(env_cpu(env), addr); } #else void *tlb_vaddr_to_host(CPUArchState *env, abi_ptr addr, diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -XXX,XX +XXX,XX @@ static inline tb_page_addr_t get_page_addr_code_hostp(CPUArchState *env, void **hostp) { if (hostp) { - *hostp = g2h(addr); + *hostp = g2h_untagged(addr); } return addr; } diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy return addr; } #else - return g2h(guest_addr); + return g2h_untagged(guest_addr); #endif } @@ -XXX,XX +XXX,XX @@ static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, #ifdef DEBUG_REMAP if (!host_ptr) return; - if (host_ptr == g2h(guest_addr)) + if (host_ptr == g2h_untagged(guest_addr)) return; if (len > 0) - memcpy(g2h(guest_addr), host_ptr, len); + memcpy(g2h_untagged(guest_addr), host_ptr, len); g_free(host_ptr); #endif } diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ static inline void tb_page_add(PageDesc *p, TranslationBlock *tb, prot |= p2->flags; p2->flags &= ~PAGE_WRITE; } - mprotect(g2h(page_addr), qemu_host_page_size, + mprotect(g2h_untagged(page_addr), qemu_host_page_size, (prot & PAGE_BITS) & ~PAGE_WRITE); if (DEBUG_TB_INVALIDATE_GATE) { printf("protecting code page: 0x" TB_PAGE_ADDR_FMT "\n", page_addr); @@ -XXX,XX +XXX,XX @@ int page_unprotect(target_ulong address, uintptr_t pc) } #endif } - mprotect((void *)g2h(host_start), qemu_host_page_size, + mprotect((void *)g2h_untagged(host_start), qemu_host_page_size, prot & PAGE_BITS); } mmap_unlock(); diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/user-exec.c +++ b/accel/tcg/user-exec.c @@ -XXX,XX +XXX,XX @@ int probe_access_flags(CPUArchState *env, target_ulong addr, int flags; flags = probe_access_internal(env, addr, 0, access_type, nonfault, ra); - *phost = flags ? NULL : g2h(addr); + *phost = flags ? NULL : g2h(env_cpu(env), addr); return flags; } @@ -XXX,XX +XXX,XX @@ void *probe_access(CPUArchState *env, target_ulong addr, int size, flags = probe_access_internal(env, addr, size, access_type, false, ra); g_assert(flags == 0); - return size ? g2h(addr) : NULL; + return size ? g2h(env_cpu(env), addr) : NULL; } #if defined(__i386__) @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldub_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_UB, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldub_p(g2h(ptr)); + ret = ldub_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ int cpu_ldsb_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_SB, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldsb_p(g2h(ptr)); + ret = ldsb_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_lduw_be_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_BEUW, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = lduw_be_p(g2h(ptr)); + ret = lduw_be_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ int cpu_ldsw_be_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_BESW, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldsw_be_p(g2h(ptr)); + ret = ldsw_be_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldl_be_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_BEUL, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldl_be_p(g2h(ptr)); + ret = ldl_be_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint64_t cpu_ldq_be_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_BEQ, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldq_be_p(g2h(ptr)); + ret = ldq_be_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_lduw_le_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_LEUW, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = lduw_le_p(g2h(ptr)); + ret = lduw_le_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ int cpu_ldsw_le_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_LESW, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldsw_le_p(g2h(ptr)); + ret = ldsw_le_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldl_le_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_LEUL, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldl_le_p(g2h(ptr)); + ret = ldl_le_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint64_t cpu_ldq_le_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_LEQ, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldq_le_p(g2h(ptr)); + ret = ldq_le_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ void cpu_stb_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_UB, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stb_p(g2h(ptr), val); + stb_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stw_be_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_BEUW, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stw_be_p(g2h(ptr), val); + stw_be_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stl_be_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_BEUL, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stl_be_p(g2h(ptr), val); + stl_be_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stq_be_data(CPUArchState *env, abi_ptr ptr, uint64_t val) uint16_t meminfo = trace_mem_get_info(MO_BEQ, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stq_be_p(g2h(ptr), val); + stq_be_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stw_le_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_LEUW, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stw_le_p(g2h(ptr), val); + stw_le_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stl_le_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_LEUL, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stl_le_p(g2h(ptr), val); + stl_le_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stq_le_data(CPUArchState *env, abi_ptr ptr, uint64_t val) uint16_t meminfo = trace_mem_get_info(MO_LEQ, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stq_le_p(g2h(ptr), val); + stq_le_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldub_code(CPUArchState *env, abi_ptr ptr) uint32_t ret; set_helper_retaddr(1); - ret = ldub_p(g2h(ptr)); + ret = ldub_p(g2h_untagged(ptr)); clear_helper_retaddr(); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_lduw_code(CPUArchState *env, abi_ptr ptr) uint32_t ret; set_helper_retaddr(1); - ret = lduw_p(g2h(ptr)); + ret = lduw_p(g2h_untagged(ptr)); clear_helper_retaddr(); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldl_code(CPUArchState *env, abi_ptr ptr) uint32_t ret; set_helper_retaddr(1); - ret = ldl_p(g2h(ptr)); + ret = ldl_p(g2h_untagged(ptr)); clear_helper_retaddr(); return ret; } @@ -XXX,XX +XXX,XX @@ uint64_t cpu_ldq_code(CPUArchState *env, abi_ptr ptr) uint64_t ret; set_helper_retaddr(1); - ret = ldq_p(g2h(ptr)); + ret = ldq_p(g2h_untagged(ptr)); clear_helper_retaddr(); return ret; } @@ -XXX,XX +XXX,XX @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr, if (unlikely(addr & (size - 1))) { cpu_loop_exit_atomic(env_cpu(env), retaddr); } - void *ret = g2h(addr); + void *ret = g2h(env_cpu(env), addr); set_helper_retaddr(retaddr); return ret; } diff --git a/bsd-user/elfload.c b/bsd-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/elfload.c +++ b/bsd-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void padzero(abi_ulong elf_bss, abi_ulong last_bss) end_addr1 = REAL_HOST_PAGE_ALIGN(elf_bss); end_addr = HOST_PAGE_ALIGN(elf_bss); if (end_addr1 < end_addr) { - mmap((void *)g2h(end_addr1), end_addr - end_addr1, + mmap((void *)g2h_untagged(end_addr1), end_addr - end_addr1, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_FIXED|MAP_PRIVATE|MAP_ANON, -1, 0); } diff --git a/bsd-user/main.c b/bsd-user/main.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/main.c +++ b/bsd-user/main.c @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) env->idt.base = target_mmap(0, sizeof(uint64_t) * (env->idt.limit + 1), PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); - idt_table = g2h(env->idt.base); + idt_table = g2h_untagged(env->idt.base); set_idt(0, 0); set_idt(1, 0); set_idt(2, 0); @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); env->gdt.limit = sizeof(uint64_t) * TARGET_GDT_ENTRIES - 1; - gdt_table = g2h(env->gdt.base); + gdt_table = g2h_untagged(env->gdt.base); #ifdef TARGET_ABI32 write_dt(&gdt_table[__USER_CS >> 3], 0, 0xfffff, DESC_G_MASK | DESC_B_MASK | DESC_P_MASK | DESC_S_MASK | diff --git a/bsd-user/mmap.c b/bsd-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/mmap.c +++ b/bsd-user/mmap.c @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int prot) } end = host_end; } - ret = mprotect(g2h(host_start), qemu_host_page_size, prot1 & PAGE_BITS); + ret = mprotect(g2h_untagged(host_start), + qemu_host_page_size, prot1 & PAGE_BITS); if (ret != 0) goto error; host_start += qemu_host_page_size; @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int prot) for(addr = end; addr < host_end; addr += TARGET_PAGE_SIZE) { prot1 |= page_get_flags(addr); } - ret = mprotect(g2h(host_end - qemu_host_page_size), qemu_host_page_size, - prot1 & PAGE_BITS); + ret = mprotect(g2h_untagged(host_end - qemu_host_page_size), + qemu_host_page_size, prot1 & PAGE_BITS); if (ret != 0) goto error; host_end -= qemu_host_page_size; @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int prot) /* handle the pages in the middle */ if (host_start < host_end) { - ret = mprotect(g2h(host_start), host_end - host_start, prot); + ret = mprotect(g2h_untagged(host_start), host_end - host_start, prot); if (ret != 0) goto error; } @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, int prot1, prot_new; real_end = real_start + qemu_host_page_size; - host_start = g2h(real_start); + host_start = g2h_untagged(real_start); /* get the protection of the target pages outside the mapping */ prot1 = 0; @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, mprotect(host_start, qemu_host_page_size, prot1 | PROT_WRITE); /* read the corresponding file data */ - pread(fd, g2h(start), end - start, offset); + pread(fd, g2h_untagged(start), end - start, offset); /* put final protection */ if (prot_new != (prot1 | PROT_WRITE)) @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int prot, /* Note: we prefer to control the mapping address. It is especially important if qemu_host_page_size > qemu_real_host_page_size */ - p = mmap(g2h(mmap_start), + p = mmap(g2h_untagged(mmap_start), host_len, prot, flags | MAP_FIXED, fd, host_offset); if (p == MAP_FAILED) goto fail; @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int prot, -1, 0); if (retaddr == -1) goto fail; - pread(fd, g2h(start), len, offset); + pread(fd, g2h_untagged(start), len, offset); if (!(prot & PROT_WRITE)) { ret = target_mprotect(start, len, prot); if (ret != 0) { @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int prot, offset1 = 0; else offset1 = offset + real_start - start; - p = mmap(g2h(real_start), real_end - real_start, + p = mmap(g2h_untagged(real_start), real_end - real_start, prot, flags, fd, offset1); if (p == MAP_FAILED) goto fail; @@ -XXX,XX +XXX,XX @@ int target_munmap(abi_ulong start, abi_ulong len) ret = 0; /* unmap what we can */ if (real_start < real_end) { - ret = munmap(g2h(real_start), real_end - real_start); + ret = munmap(g2h_untagged(real_start), real_end - real_start); } if (ret == 0) @@ -XXX,XX +XXX,XX @@ int target_msync(abi_ulong start, abi_ulong len, int flags) return 0; start &= qemu_host_page_mask; - return msync(g2h(start), end - start, flags); + return msync(g2h_untagged(start), end - start, flags); } diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ enum { static bool init_guest_commpage(void) { - void *want = g2h(ARM_COMMPAGE & -qemu_host_page_size); + void *want = g2h_untagged(ARM_COMMPAGE & -qemu_host_page_size); void *addr = mmap(want, qemu_host_page_size, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); @@ -XXX,XX +XXX,XX @@ static bool init_guest_commpage(void) } /* Set kernel helper versions; rest of page is 0. */ - __put_user(5, (uint32_t *)g2h(0xffff0ffcu)); + __put_user(5, (uint32_t *)g2h_untagged(0xffff0ffcu)); if (mprotect(addr, qemu_host_page_size, PROT_READ)) { perror("Protecting guest commpage"); @@ -XXX,XX +XXX,XX @@ static void zero_bss(abi_ulong elf_bss, abi_ulong last_bss, int prot) here is still actually needed. For now, continue with it, but merge it with the "normal" mmap that would allocate the bss. */ - host_start = (uintptr_t) g2h(elf_bss); - host_end = (uintptr_t) g2h(last_bss); + host_start = (uintptr_t) g2h_untagged(elf_bss); + host_end = (uintptr_t) g2h_untagged(last_bss); host_map_start = REAL_HOST_PAGE_ALIGN(host_start); if (host_map_start < host_end) { @@ -XXX,XX +XXX,XX @@ static void pgb_have_guest_base(const char *image_name, abi_ulong guest_loaddr, } /* Reserve the address space for the binary, or reserved_va. */ - test = g2h(guest_loaddr); + test = g2h_untagged(guest_loaddr); addr = mmap(test, guest_hiaddr - guest_loaddr, PROT_NONE, flags, -1, 0); if (test != addr) { pgb_fail_in_use(image_name); @@ -XXX,XX +XXX,XX @@ static void pgb_reserved_va(const char *image_name, abi_ulong guest_loaddr, /* Reserve the memory on the host. */ assert(guest_base != 0); - test = g2h(0); + test = g2h_untagged(0); addr = mmap(test, reserved_va, PROT_NONE, flags, -1, 0); if (addr == MAP_FAILED || addr != test) { error_report("Unable to reserve 0x%lx bytes of virtual address " diff --git a/linux-user/flatload.c b/linux-user/flatload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/flatload.c +++ b/linux-user/flatload.c @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, } /* zero the BSS. */ - memset(g2h(datapos + data_len), 0, bss_len); + memset(g2h_untagged(datapos + data_len), 0, bss_len); return 0; } diff --git a/linux-user/hppa/cpu_loop.c b/linux-user/hppa/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hppa/cpu_loop.c +++ b/linux-user/hppa/cpu_loop.c @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) { + CPUState *cs = env_cpu(env); uint32_t which = env->gr[20]; abi_ulong addr = env->gr[26]; abi_ulong old = env->gr[25]; @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) } old = tswap32(old); new = tswap32(new); - ret = qatomic_cmpxchg((uint32_t *)g2h(addr), old, new); + ret = qatomic_cmpxchg((uint32_t *)g2h(cs, addr), old, new); ret = tswap32(ret); break; @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) can be host-endian as well. */ switch (size) { case 0: - old = *(uint8_t *)g2h(old); - new = *(uint8_t *)g2h(new); - ret = qatomic_cmpxchg((uint8_t *)g2h(addr), old, new); + old = *(uint8_t *)g2h(cs, old); + new = *(uint8_t *)g2h(cs, new); + ret = qatomic_cmpxchg((uint8_t *)g2h(cs, addr), old, new); ret = ret != old; break; case 1: - old = *(uint16_t *)g2h(old); - new = *(uint16_t *)g2h(new); - ret = qatomic_cmpxchg((uint16_t *)g2h(addr), old, new); + old = *(uint16_t *)g2h(cs, old); + new = *(uint16_t *)g2h(cs, new); + ret = qatomic_cmpxchg((uint16_t *)g2h(cs, addr), old, new); ret = ret != old; break; case 2: - old = *(uint32_t *)g2h(old); - new = *(uint32_t *)g2h(new); - ret = qatomic_cmpxchg((uint32_t *)g2h(addr), old, new); + old = *(uint32_t *)g2h(cs, old); + new = *(uint32_t *)g2h(cs, new); + ret = qatomic_cmpxchg((uint32_t *)g2h(cs, addr), old, new); ret = ret != old; break; case 3: { uint64_t o64, n64, r64; - o64 = *(uint64_t *)g2h(old); - n64 = *(uint64_t *)g2h(new); + o64 = *(uint64_t *)g2h(cs, old); + n64 = *(uint64_t *)g2h(cs, new); #ifdef CONFIG_ATOMIC64 - r64 = qatomic_cmpxchg__nocheck((uint64_t *)g2h(addr), + r64 = qatomic_cmpxchg__nocheck((uint64_t *)g2h(cs, addr), o64, n64); ret = r64 != o64; #else start_exclusive(); - r64 = *(uint64_t *)g2h(addr); + r64 = *(uint64_t *)g2h(cs, addr); ret = 1; if (r64 == o64) { - *(uint64_t *)g2h(addr) = n64; + *(uint64_t *)g2h(cs, addr) = n64; ret = 0; } end_exclusive(); diff --git a/linux-user/i386/cpu_loop.c b/linux-user/i386/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/i386/cpu_loop.c +++ b/linux-user/i386/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) env->idt.base = target_mmap(0, sizeof(uint64_t) * (env->idt.limit + 1), PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); - idt_table = g2h(env->idt.base); + idt_table = g2h_untagged(env->idt.base); set_idt(0, 0); set_idt(1, 0); set_idt(2, 0); @@ -XXX,XX +XXX,XX @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); env->gdt.limit = sizeof(uint64_t) * TARGET_GDT_ENTRIES - 1; - gdt_table = g2h(env->gdt.base); + gdt_table = g2h_untagged(env->gdt.base); #ifdef TARGET_ABI32 write_dt(&gdt_table[__USER_CS >> 3], 0, 0xfffff, DESC_G_MASK | DESC_B_MASK | DESC_P_MASK | DESC_S_MASK | diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int target_prot) } end = host_end; } - ret = mprotect(g2h(host_start), qemu_host_page_size, + ret = mprotect(g2h_untagged(host_start), qemu_host_page_size, prot1 & PAGE_BITS); if (ret != 0) { goto error; @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int target_prot) for (addr = end; addr < host_end; addr += TARGET_PAGE_SIZE) { prot1 |= page_get_flags(addr); } - ret = mprotect(g2h(host_end - qemu_host_page_size), + ret = mprotect(g2h_untagged(host_end - qemu_host_page_size), qemu_host_page_size, prot1 & PAGE_BITS); if (ret != 0) { goto error; @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int target_prot) /* handle the pages in the middle */ if (host_start < host_end) { - ret = mprotect(g2h(host_start), host_end - host_start, host_prot); + ret = mprotect(g2h_untagged(host_start), + host_end - host_start, host_prot); if (ret != 0) { goto error; } @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, int prot1, prot_new; real_end = real_start + qemu_host_page_size; - host_start = g2h(real_start); + host_start = g2h_untagged(real_start); /* get the protection of the target pages outside the mapping */ prot1 = 0; @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, mprotect(host_start, qemu_host_page_size, prot1 | PROT_WRITE); /* read the corresponding file data */ - if (pread(fd, g2h(start), end - start, offset) == -1) + if (pread(fd, g2h_untagged(start), end - start, offset) == -1) return -1; /* put final protection */ @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, mprotect(host_start, qemu_host_page_size, prot_new); } if (prot_new & PROT_WRITE) { - memset(g2h(start), 0, end - start); + memset(g2h_untagged(start), 0, end - start); } } return 0; @@ -XXX,XX +XXX,XX @@ abi_ulong mmap_find_vma(abi_ulong start, abi_ulong size, abi_ulong align) * - mremap() with MREMAP_FIXED flag * - shmat() with SHM_REMAP flag */ - ptr = mmap(g2h(addr), size, PROT_NONE, + ptr = mmap(g2h_untagged(addr), size, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE|MAP_NORESERVE, -1, 0); /* ENOMEM, if host address space has no memory */ @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, /* Note: we prefer to control the mapping address. It is especially important if qemu_host_page_size > qemu_real_host_page_size */ - p = mmap(g2h(start), host_len, host_prot, + p = mmap(g2h_untagged(start), host_len, host_prot, flags | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (p == MAP_FAILED) { goto fail; @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, /* update start so that it points to the file position at 'offset' */ host_start = (unsigned long)p; if (!(flags & MAP_ANONYMOUS)) { - p = mmap(g2h(start), len, host_prot, + p = mmap(g2h_untagged(start), len, host_prot, flags | MAP_FIXED, fd, host_offset); if (p == MAP_FAILED) { - munmap(g2h(start), host_len); + munmap(g2h_untagged(start), host_len); goto fail; } host_start += offset - host_offset; @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, -1, 0); if (retaddr == -1) goto fail; - if (pread(fd, g2h(start), len, offset) == -1) + if (pread(fd, g2h_untagged(start), len, offset) == -1) goto fail; if (!(host_prot & PROT_WRITE)) { ret = target_mprotect(start, len, target_prot); @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, offset1 = 0; else offset1 = offset + real_start - start; - p = mmap(g2h(real_start), real_end - real_start, + p = mmap(g2h_untagged(real_start), real_end - real_start, host_prot, flags, fd, offset1); if (p == MAP_FAILED) goto fail; @@ -XXX,XX +XXX,XX @@ static void mmap_reserve(abi_ulong start, abi_ulong size) real_end -= qemu_host_page_size; } if (real_start != real_end) { - mmap(g2h(real_start), real_end - real_start, PROT_NONE, + mmap(g2h_untagged(real_start), real_end - real_start, PROT_NONE, MAP_FIXED | MAP_ANONYMOUS | MAP_PRIVATE | MAP_NORESERVE, -1, 0); } @@ -XXX,XX +XXX,XX @@ int target_munmap(abi_ulong start, abi_ulong len) if (reserved_va) { mmap_reserve(real_start, real_end - real_start); } else { - ret = munmap(g2h(real_start), real_end - real_start); + ret = munmap(g2h_untagged(real_start), real_end - real_start); } } @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, mmap_lock(); if (flags & MREMAP_FIXED) { - host_addr = mremap(g2h(old_addr), old_size, new_size, - flags, g2h(new_addr)); + host_addr = mremap(g2h_untagged(old_addr), old_size, new_size, + flags, g2h_untagged(new_addr)); if (reserved_va && host_addr != MAP_FAILED) { /* If new and old addresses overlap then the above mremap will @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, errno = ENOMEM; host_addr = MAP_FAILED; } else { - host_addr = mremap(g2h(old_addr), old_size, new_size, - flags | MREMAP_FIXED, g2h(mmap_start)); + host_addr = mremap(g2h_untagged(old_addr), old_size, new_size, + flags | MREMAP_FIXED, + g2h_untagged(mmap_start)); if (reserved_va) { mmap_reserve(old_addr, old_size); } @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, } } if (prot == 0) { - host_addr = mremap(g2h(old_addr), old_size, new_size, flags); + host_addr = mremap(g2h_untagged(old_addr), + old_size, new_size, flags); if (host_addr != MAP_FAILED) { /* Check if address fits target address space */ if (!guest_range_valid(h2g(host_addr), new_size)) { /* Revert mremap() changes */ - host_addr = mremap(g2h(old_addr), new_size, old_size, - flags); + host_addr = mremap(g2h_untagged(old_addr), + new_size, old_size, flags); errno = ENOMEM; host_addr = MAP_FAILED; } else if (reserved_va && old_size > new_size) { diff --git a/linux-user/ppc/signal.c b/linux-user/ppc/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/ppc/signal.c +++ b/linux-user/ppc/signal.c @@ -XXX,XX +XXX,XX @@ static void restore_user_regs(CPUPPCState *env, uint64_t v_addr; /* 64-bit needs to recover the pointer to the vectors from the frame */ __get_user(v_addr, &frame->v_regs); - v_regs = g2h(v_addr); + v_regs = g2h(env_cpu(env), v_addr); #else v_regs = (ppc_avr_t *)frame->mc_vregs.altivec; #endif @@ -XXX,XX +XXX,XX @@ void setup_rt_frame(int sig, struct target_sigaction *ka, if (get_ppc64_abi(image) < 2) { /* ELFv1 PPC64 function pointers are pointers to OPD entries. */ struct target_func_ptr *handler = - (struct target_func_ptr *)g2h(ka->_sa_handler); + (struct target_func_ptr *)g2h(env_cpu(env), ka->_sa_handler); env->nip = tswapl(handler->entry); env->gpr[2] = tswapl(handler->toc); } else { diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_brk(abi_ulong new_brk) /* Heap contents are initialized to zero, as for anonymous * mapped pages. */ if (new_brk > target_brk) { - memset(g2h(target_brk), 0, new_brk - target_brk); + memset(g2h_untagged(target_brk), 0, new_brk - target_brk); } target_brk = new_brk; DEBUGF_BRK(TARGET_ABI_FMT_lx " (new_brk <= brk_page)\n", target_brk); @@ -XXX,XX +XXX,XX @@ abi_long do_brk(abi_ulong new_brk) * come from the remaining part of the previous page: it may * contains garbage data due to a previous heap usage (grown * then shrunken). */ - memset(g2h(target_brk), 0, brk_page - target_brk); + memset(g2h_untagged(target_brk), 0, brk_page - target_brk); target_brk = new_brk; brk_page = HOST_PAGE_ALIGN(target_brk); @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, mmap_lock(); if (shmaddr) - host_raddr = shmat(shmid, (void *)g2h(shmaddr), shmflg); + host_raddr = shmat(shmid, (void *)g2h_untagged(shmaddr), shmflg); else { abi_ulong mmap_start; @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, errno = ENOMEM; host_raddr = (void *)-1; } else - host_raddr = shmat(shmid, g2h(mmap_start), shmflg | SHM_REMAP); + host_raddr = shmat(shmid, g2h_untagged(mmap_start), + shmflg | SHM_REMAP); } if (host_raddr == (void *)-1) { @@ -XXX,XX +XXX,XX @@ static inline abi_long do_shmdt(abi_ulong shmaddr) break; } } - rv = get_errno(shmdt(g2h(shmaddr))); + rv = get_errno(shmdt(g2h_untagged(shmaddr))); mmap_unlock(); @@ -XXX,XX +XXX,XX @@ static abi_long write_ldt(CPUX86State *env, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (env->ldt.base == -1) return -TARGET_ENOMEM; - memset(g2h(env->ldt.base), 0, + memset(g2h_untagged(env->ldt.base), 0, TARGET_LDT_ENTRIES * TARGET_LDT_ENTRY_SIZE); env->ldt.limit = 0xffff; - ldt_table = g2h(env->ldt.base); + ldt_table = g2h_untagged(env->ldt.base); } /* NOTE: same code as Linux kernel */ @@ -XXX,XX +XXX,XX @@ static abi_long do_modify_ldt(CPUX86State *env, int func, abi_ulong ptr, #if defined(TARGET_ABI32) abi_long do_set_thread_area(CPUX86State *env, abi_ulong ptr) { - uint64_t *gdt_table = g2h(env->gdt.base); + uint64_t *gdt_table = g2h_untagged(env->gdt.base); struct target_modify_ldt_ldt_s ldt_info; struct target_modify_ldt_ldt_s *target_ldt_info; int seg_32bit, contents, read_exec_only, limit_in_pages; @@ -XXX,XX +XXX,XX @@ install: static abi_long do_get_thread_area(CPUX86State *env, abi_ulong ptr) { struct target_modify_ldt_ldt_s *target_ldt_info; - uint64_t *gdt_table = g2h(env->gdt.base); + uint64_t *gdt_table = g2h_untagged(env->gdt.base); uint32_t base_addr, limit, flags; int seg_32bit, contents, read_exec_only, limit_in_pages, idx; int seg_not_present, useable, lm; @@ -XXX,XX +XXX,XX @@ static int do_safe_futex(int *uaddr, int op, int val, tricky. However they're probably useless because guest atomic operations won't work either. */ #if defined(TARGET_NR_futex) -static int do_futex(target_ulong uaddr, int op, int val, target_ulong timeout, - target_ulong uaddr2, int val3) +static int do_futex(CPUState *cpu, target_ulong uaddr, int op, int val, + target_ulong timeout, target_ulong uaddr2, int val3) { struct timespec ts, *pts; int base_op; @@ -XXX,XX +XXX,XX @@ static int do_futex(target_ulong uaddr, int op, int val, target_ulong timeout, } else { pts = NULL; } - return do_safe_futex(g2h(uaddr), op, tswap32(val), pts, NULL, val3); + return do_safe_futex(g2h(cpu, uaddr), + op, tswap32(val), pts, NULL, val3); case FUTEX_WAKE: - return do_safe_futex(g2h(uaddr), op, val, NULL, NULL, 0); + return do_safe_futex(g2h(cpu, uaddr), + op, val, NULL, NULL, 0); case FUTEX_FD: - return do_safe_futex(g2h(uaddr), op, val, NULL, NULL, 0); + return do_safe_futex(g2h(cpu, uaddr), + op, val, NULL, NULL, 0); case FUTEX_REQUEUE: case FUTEX_CMP_REQUEUE: case FUTEX_WAKE_OP: @@ -XXX,XX +XXX,XX @@ static int do_futex(target_ulong uaddr, int op, int val, target_ulong timeout, to satisfy the compiler. We do not need to tswap TIMEOUT since it's not compared to guest memory. */ pts = (struct timespec *)(uintptr_t) timeout; - return do_safe_futex(g2h(uaddr), op, val, pts, g2h(uaddr2), + return do_safe_futex(g2h(cpu, uaddr), op, val, pts, g2h(cpu, uaddr2), (base_op == FUTEX_CMP_REQUEUE - ? tswap32(val3) - : val3)); + ? tswap32(val3) : val3)); default: return -TARGET_ENOSYS; } @@ -XXX,XX +XXX,XX @@ static int do_futex(target_ulong uaddr, int op, int val, target_ulong timeout, #endif #if defined(TARGET_NR_futex_time64) -static int do_futex_time64(target_ulong uaddr, int op, int val, target_ulong timeout, +static int do_futex_time64(CPUState *cpu, target_ulong uaddr, int op, + int val, target_ulong timeout, target_ulong uaddr2, int val3) { struct timespec ts, *pts; @@ -XXX,XX +XXX,XX @@ static int do_futex_time64(target_ulong uaddr, int op, int val, target_ulong tim } else { pts = NULL; } - return do_safe_futex(g2h(uaddr), op, tswap32(val), pts, NULL, val3); + return do_safe_futex(g2h(cpu, uaddr), op, + tswap32(val), pts, NULL, val3); case FUTEX_WAKE: - return do_safe_futex(g2h(uaddr), op, val, NULL, NULL, 0); + return do_safe_futex(g2h(cpu, uaddr), op, val, NULL, NULL, 0); case FUTEX_FD: - return do_safe_futex(g2h(uaddr), op, val, NULL, NULL, 0); + return do_safe_futex(g2h(cpu, uaddr), op, val, NULL, NULL, 0); case FUTEX_REQUEUE: case FUTEX_CMP_REQUEUE: case FUTEX_WAKE_OP: @@ -XXX,XX +XXX,XX @@ static int do_futex_time64(target_ulong uaddr, int op, int val, target_ulong tim to satisfy the compiler. We do not need to tswap TIMEOUT since it's not compared to guest memory. */ pts = (struct timespec *)(uintptr_t) timeout; - return do_safe_futex(g2h(uaddr), op, val, pts, g2h(uaddr2), + return do_safe_futex(g2h(cpu, uaddr), op, val, pts, g2h(cpu, uaddr2), (base_op == FUTEX_CMP_REQUEUE - ? tswap32(val3) - : val3)); + ? tswap32(val3) : val3)); default: return -TARGET_ENOSYS; } @@ -XXX,XX +XXX,XX @@ static int open_self_maps(void *cpu_env, int fd) const char *path; max = h2g_valid(max - 1) ? - max : (uintptr_t) g2h(GUEST_ADDR_MAX) + 1; + max : (uintptr_t) g2h_untagged(GUEST_ADDR_MAX) + 1; if (page_check_range(h2g(min), max - min, flags) == -1) { continue; @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, if (ts->child_tidptr) { put_user_u32(0, ts->child_tidptr); - do_sys_futex(g2h(ts->child_tidptr), FUTEX_WAKE, INT_MAX, - NULL, NULL, 0); + do_sys_futex(g2h(cpu, ts->child_tidptr), + FUTEX_WAKE, INT_MAX, NULL, NULL, 0); } thread_cpu = NULL; g_free(ts); @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, if (!arg5) { ret = mount(p, p2, p3, (unsigned long)arg4, NULL); } else { - ret = mount(p, p2, p3, (unsigned long)arg4, g2h(arg5)); + ret = mount(p, p2, p3, (unsigned long)arg4, g2h(cpu, arg5)); } ret = get_errno(ret); @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, /* ??? msync/mlock/munlock are broken for softmmu. */ #ifdef TARGET_NR_msync case TARGET_NR_msync: - return get_errno(msync(g2h(arg1), arg2, arg3)); + return get_errno(msync(g2h(cpu, arg1), arg2, arg3)); #endif #ifdef TARGET_NR_mlock case TARGET_NR_mlock: - return get_errno(mlock(g2h(arg1), arg2)); + return get_errno(mlock(g2h(cpu, arg1), arg2)); #endif #ifdef TARGET_NR_munlock case TARGET_NR_munlock: - return get_errno(munlock(g2h(arg1), arg2)); + return get_errno(munlock(g2h(cpu, arg1), arg2)); #endif #ifdef TARGET_NR_mlockall case TARGET_NR_mlockall: @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, #if defined(TARGET_NR_set_tid_address) && defined(__NR_set_tid_address) case TARGET_NR_set_tid_address: - return get_errno(set_tid_address((int *)g2h(arg1))); + return get_errno(set_tid_address((int *)g2h(cpu, arg1))); #endif case TARGET_NR_tkill: @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, #endif #ifdef TARGET_NR_futex case TARGET_NR_futex: - return do_futex(arg1, arg2, arg3, arg4, arg5, arg6); + return do_futex(cpu, arg1, arg2, arg3, arg4, arg5, arg6); #endif #ifdef TARGET_NR_futex_time64 case TARGET_NR_futex_time64: - return do_futex_time64(arg1, arg2, arg3, arg4, arg5, arg6); + return do_futex_time64(cpu, arg1, arg2, arg3, arg4, arg5, arg6); #endif #if defined(TARGET_NR_inotify_init) && defined(__NR_inotify_init) case TARGET_NR_inotify_init: diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(paired_cmpxchg64_le)(CPUARMState *env, uint64_t addr, #ifdef CONFIG_USER_ONLY /* ??? Enforce alignment. */ - uint64_t *haddr = g2h(addr); + uint64_t *haddr = g2h(env_cpu(env), addr); set_helper_retaddr(ra); o0 = ldq_le_p(haddr + 0); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(paired_cmpxchg64_be)(CPUARMState *env, uint64_t addr, #ifdef CONFIG_USER_ONLY /* ??? Enforce alignment. */ - uint64_t *haddr = g2h(addr); + uint64_t *haddr = g2h(env_cpu(env), addr); set_helper_retaddr(ra); o1 = ldq_be_p(haddr + 0); diff --git a/target/hppa/op_helper.c b/target/hppa/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/op_helper.c +++ b/target/hppa/op_helper.c @@ -XXX,XX +XXX,XX @@ static void atomic_store_3(CPUHPPAState *env, target_ulong addr, uint32_t val, #ifdef CONFIG_USER_ONLY uint32_t old, new, cmp; - uint32_t *haddr = g2h(addr - 1); + uint32_t *haddr = g2h(env_cpu(env), addr - 1); old = *haddr; while (1) { new = (old & ~mask) | (val & mask); diff --git a/target/i386/tcg/mem_helper.c b/target/i386/tcg/mem_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/mem_helper.c +++ b/target/i386/tcg/mem_helper.c @@ -XXX,XX +XXX,XX @@ void helper_cmpxchg8b(CPUX86State *env, target_ulong a0) #ifdef CONFIG_USER_ONLY { - uint64_t *haddr = g2h(a0); + uint64_t *haddr = g2h(env_cpu(env), a0); cmpv = cpu_to_le64(cmpv); newv = cpu_to_le64(newv); oldv = qatomic_cmpxchg__nocheck(haddr, cmpv, newv); diff --git a/target/s390x/mem_helper.c b/target/s390x/mem_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/mem_helper.c +++ b/target/s390x/mem_helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t do_csst(CPUS390XState *env, uint32_t r3, uint64_t a1, if (parallel) { #ifdef CONFIG_USER_ONLY - uint32_t *haddr = g2h(a1); + uint32_t *haddr = g2h(env_cpu(env), a1); ov = qatomic_cmpxchg__nocheck(haddr, cv, nv); #else TCGMemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mem_idx); @@ -XXX,XX +XXX,XX @@ static uint32_t do_csst(CPUS390XState *env, uint32_t r3, uint64_t a1, if (parallel) { #ifdef CONFIG_ATOMIC64 # ifdef CONFIG_USER_ONLY - uint64_t *haddr = g2h(a1); + uint64_t *haddr = g2h(env_cpu(env), a1); ov = qatomic_cmpxchg__nocheck(haddr, cv, nv); # else TCGMemOpIdx oi = make_memop_idx(MO_TEQ | MO_ALIGN, mem_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We define target_mmap et al as untagged, so that they can be used from the binary loaders. Explicitly call cpu_untagged_addr for munmap, mprotect, mremap syscall entry points. Add a few comments for the syscalls that are exempted by the kernel's tagged-address-abi.rst. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/syscall.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_brk(abi_ulong new_brk) abi_long mapped_addr; abi_ulong new_alloc_size; + /* brk pointers are always untagged */ + DEBUGF_BRK("do_brk(" TARGET_ABI_FMT_lx ") -> ", new_brk); if (!new_brk) { @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, int i,ret; abi_ulong shmlba; + /* shmat pointers are always untagged */ + /* find out the length of the shared memory segment */ ret = get_errno(shmctl(shmid, IPC_STAT, &shm_info)); if (is_error(ret)) { @@ -XXX,XX +XXX,XX @@ static inline abi_long do_shmdt(abi_ulong shmaddr) int i; abi_long rv; + /* shmdt pointers are always untagged */ + mmap_lock(); for (i = 0; i < N_SHM_REGIONS; ++i) { @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, v5, v6)); } #else + /* mmap pointers are always untagged */ ret = get_errno(target_mmap(arg1, arg2, arg3, target_to_host_bitmask(arg4, mmap_flags_tbl), arg5, @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, return get_errno(ret); #endif case TARGET_NR_munmap: + arg1 = cpu_untagged_addr(cpu, arg1); return get_errno(target_munmap(arg1, arg2)); case TARGET_NR_mprotect: + arg1 = cpu_untagged_addr(cpu, arg1); { TaskState *ts = cpu->opaque; /* Special hack to detect libc making the stack executable. */ @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, return get_errno(target_mprotect(arg1, arg2, arg3)); #ifdef TARGET_NR_mremap case TARGET_NR_mremap: + arg1 = cpu_untagged_addr(cpu, arg1); + /* mremap new_addr (arg5) is always untagged */ return get_errno(target_mremap(arg1, arg2, arg3, arg4, arg5)); #endif /* ??? msync/mlock/munlock are broken for softmmu. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We're currently open-coding the range check in access_ok; use guest_range_valid when size != 0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { - if (!guest_addr_valid(addr)) { - return false; - } - if (size != 0 && - (addr + size - 1 < addr || - !guest_addr_valid(addr + size - 1))) { + if (size == 0 + ? !guest_addr_valid(addr) + : !guest_range_valid(addr, size)) { return false; } return page_check_range((target_ulong)addr, size, type) == 0; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The places that use these are better off using untagged addresses, so do not provide a tagged versions. Rename to make it clear about the address type. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 4 ++-- linux-user/qemu.h | 4 ++-- accel/tcg/user-exec.c | 3 ++- linux-user/mmap.c | 14 +++++++------- linux-user/syscall.c | 2 +- 5 files changed, 14 insertions(+), 13 deletions(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ static inline void *g2h(CPUState *cs, abi_ptr x) return g2h_untagged(cpu_untagged_addr(cs, x)); } -static inline bool guest_addr_valid(abi_ulong x) +static inline bool guest_addr_valid_untagged(abi_ulong x) { return x <= GUEST_ADDR_MAX; } -static inline bool guest_range_valid(abi_ulong start, abi_ulong len) +static inline bool guest_range_valid_untagged(abi_ulong start, abi_ulong len) { return len - 1 <= GUEST_ADDR_MAX && start <= GUEST_ADDR_MAX - len + 1; } diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { if (size == 0 - ? !guest_addr_valid(addr) - : !guest_range_valid(addr, size)) { + ? !guest_addr_valid_untagged(addr) + : !guest_range_valid_untagged(addr, size)) { return false; } return page_check_range((target_ulong)addr, size, type) == 0; diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/user-exec.c +++ b/accel/tcg/user-exec.c @@ -XXX,XX +XXX,XX @@ static int probe_access_internal(CPUArchState *env, target_ulong addr, g_assert_not_reached(); } - if (!guest_addr_valid(addr) || page_check_range(addr, 1, flags) < 0) { + if (!guest_addr_valid_untagged(addr) || + page_check_range(addr, 1, flags) < 0) { if (nonfault) { return TLB_INVALID_MASK; } else { diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int target_prot) } len = TARGET_PAGE_ALIGN(len); end = start + len; - if (!guest_range_valid(start, len)) { + if (!guest_range_valid_untagged(start, len)) { return -TARGET_ENOMEM; } if (len == 0) { @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, * It can fail only on 64-bit host with 32-bit target. * On any other target/host host mmap() handles this error correctly. */ - if (end < start || !guest_range_valid(start, len)) { + if (end < start || !guest_range_valid_untagged(start, len)) { errno = ENOMEM; goto fail; } @@ -XXX,XX +XXX,XX @@ int target_munmap(abi_ulong start, abi_ulong len) if (start & ~TARGET_PAGE_MASK) return -TARGET_EINVAL; len = TARGET_PAGE_ALIGN(len); - if (len == 0 || !guest_range_valid(start, len)) { + if (len == 0 || !guest_range_valid_untagged(start, len)) { return -TARGET_EINVAL; } @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, int prot; void *host_addr; - if (!guest_range_valid(old_addr, old_size) || + if (!guest_range_valid_untagged(old_addr, old_size) || ((flags & MREMAP_FIXED) && - !guest_range_valid(new_addr, new_size)) || + !guest_range_valid_untagged(new_addr, new_size)) || ((flags & MREMAP_MAYMOVE) == 0 && - !guest_range_valid(old_addr, new_size))) { + !guest_range_valid_untagged(old_addr, new_size))) { errno = ENOMEM; return -1; } @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, if (host_addr != MAP_FAILED) { /* Check if address fits target address space */ - if (!guest_range_valid(h2g(host_addr), new_size)) { + if (!guest_range_valid_untagged(h2g(host_addr), new_size)) { /* Revert mremap() changes */ host_addr = mremap(g2h_untagged(old_addr), new_size, old_size, flags); diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, return -TARGET_EINVAL; } } - if (!guest_range_valid(shmaddr, shm_info.shm_segsz)) { + if (!guest_range_valid_untagged(shmaddr, shm_info.shm_segsz)) { return -TARGET_EINVAL; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Provide both tagged and untagged versions of access_ok. In a few places use thread_cpu, as the user is several callees removed from do_syscall1. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 11 +++++++++-- linux-user/elfload.c | 2 +- linux-user/hppa/cpu_loop.c | 8 ++++---- linux-user/i386/cpu_loop.c | 2 +- linux-user/i386/signal.c | 5 +++-- linux-user/syscall.c | 9 ++++++--- 6 files changed, 24 insertions(+), 13 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; #define VERIFY_READ PAGE_READ #define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) -static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) +static inline bool access_ok_untagged(int type, abi_ulong addr, abi_ulong size) { if (size == 0 ? !guest_addr_valid_untagged(addr) @@ -XXX,XX +XXX,XX @@ static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) return page_check_range((target_ulong)addr, size, type) == 0; } +static inline bool access_ok(CPUState *cpu, int type, + abi_ulong addr, abi_ulong size) +{ + return access_ok_untagged(type, cpu_untagged_addr(cpu, addr), size); +} + /* NOTE __get_user and __put_user use host pointers and don't check access. These are usually used to access struct data members once the struct has been locked - usually with lock_user_struct. */ @@ -XXX,XX +XXX,XX @@ abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); host area will have the same contents as the guest. */ static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy) { - if (!access_ok(type, guest_addr, len)) + if (!access_ok_untagged(type, guest_addr, len)) { return NULL; + } #ifdef DEBUG_REMAP { void *addr; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static int vma_get_mapping_count(const struct mm_struct *mm) static abi_ulong vma_dump_size(const struct vm_area_struct *vma) { /* if we cannot even read the first page, skip it */ - if (!access_ok(VERIFY_READ, vma->vma_start, TARGET_PAGE_SIZE)) + if (!access_ok_untagged(VERIFY_READ, vma->vma_start, TARGET_PAGE_SIZE)) return (0); /* diff --git a/linux-user/hppa/cpu_loop.c b/linux-user/hppa/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hppa/cpu_loop.c +++ b/linux-user/hppa/cpu_loop.c @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) return -TARGET_ENOSYS; case 0: /* elf32 atomic 32bit cmpxchg */ - if ((addr & 3) || !access_ok(VERIFY_WRITE, addr, 4)) { + if ((addr & 3) || !access_ok(cs, VERIFY_WRITE, addr, 4)) { return -TARGET_EFAULT; } old = tswap32(old); @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) return -TARGET_ENOSYS; } if (((addr | old | new) & ((1 << size) - 1)) - || !access_ok(VERIFY_WRITE, addr, 1 << size) - || !access_ok(VERIFY_READ, old, 1 << size) - || !access_ok(VERIFY_READ, new, 1 << size)) { + || !access_ok(cs, VERIFY_WRITE, addr, 1 << size) + || !access_ok(cs, VERIFY_READ, old, 1 << size) + || !access_ok(cs, VERIFY_READ, new, 1 << size)) { return -TARGET_EFAULT; } /* Note that below we use host-endian loads so that the cmpxchg diff --git a/linux-user/i386/cpu_loop.c b/linux-user/i386/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/i386/cpu_loop.c +++ b/linux-user/i386/cpu_loop.c @@ -XXX,XX +XXX,XX @@ static bool write_ok_or_segv(CPUX86State *env, abi_ptr addr, size_t len) * For all the vsyscalls, NULL means "don't write anything" not * "write it at address 0". */ - if (addr == 0 || access_ok(VERIFY_WRITE, addr, len)) { + if (addr == 0 || access_ok(env_cpu(env), VERIFY_WRITE, addr, len)) { return true; } diff --git a/linux-user/i386/signal.c b/linux-user/i386/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/i386/signal.c +++ b/linux-user/i386/signal.c @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUX86State *env, struct target_sigcontext *sc) fpstate_addr = tswapl(sc->fpstate); if (fpstate_addr != 0) { - if (!access_ok(VERIFY_READ, fpstate_addr, - sizeof(struct target_fpstate))) + if (!access_ok(env_cpu(env), VERIFY_READ, fpstate_addr, + sizeof(struct target_fpstate))) { goto badframe; + } #ifndef TARGET_X86_64 cpu_x86_frstor(env, fpstate_addr, 1); #else diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_accept4(int fd, abi_ulong target_addr, return -TARGET_EINVAL; } - if (!access_ok(VERIFY_WRITE, target_addr, addrlen)) + if (!access_ok(thread_cpu, VERIFY_WRITE, target_addr, addrlen)) { return -TARGET_EFAULT; + } addr = alloca(addrlen); @@ -XXX,XX +XXX,XX @@ static abi_long do_getpeername(int fd, abi_ulong target_addr, return -TARGET_EINVAL; } - if (!access_ok(VERIFY_WRITE, target_addr, addrlen)) + if (!access_ok(thread_cpu, VERIFY_WRITE, target_addr, addrlen)) { return -TARGET_EFAULT; + } addr = alloca(addrlen); @@ -XXX,XX +XXX,XX @@ static abi_long do_getsockname(int fd, abi_ulong target_addr, return -TARGET_EINVAL; } - if (!access_ok(VERIFY_WRITE, target_addr, addrlen)) + if (!access_ok(thread_cpu, VERIFY_WRITE, target_addr, addrlen)) { return -TARGET_EFAULT; + } addr = alloca(addrlen); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These functions are not small, except for unlock_user without debugging enabled. Move them out of line, and add missing braces on the way. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-18-richard.henderson@linaro.org [PMM: fixed the sense of an ifdef test in qemu.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 47 +++++++------------------------------------- linux-user/uaccess.c | 46 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+), 40 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); /* Lock an area of guest memory into the host. If copy is true then the host area will have the same contents as the guest. */ -static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy) -{ - if (!access_ok_untagged(type, guest_addr, len)) { - return NULL; - } -#ifdef DEBUG_REMAP - { - void *addr; - addr = g_malloc(len); - if (copy) - memcpy(addr, g2h(guest_addr), len); - else - memset(addr, 0, len); - return addr; - } -#else - return g2h_untagged(guest_addr); -#endif -} +void *lock_user(int type, abi_ulong guest_addr, long len, int copy); /* Unlock an area of guest memory. The first LEN bytes must be flushed back to guest memory. host_ptr = NULL is explicitly allowed and does nothing. */ -static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, - long len) -{ - -#ifdef DEBUG_REMAP - if (!host_ptr) - return; - if (host_ptr == g2h_untagged(guest_addr)) - return; - if (len > 0) - memcpy(g2h_untagged(guest_addr), host_ptr, len); - g_free(host_ptr); +#ifndef DEBUG_REMAP +static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, long len) +{ } +#else +void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); #endif -} /* Return the length of a string in target memory or -TARGET_EFAULT if access error. */ abi_long target_strlen(abi_ulong gaddr); /* Like lock_user but for null terminated strings. */ -static inline void *lock_user_string(abi_ulong guest_addr) -{ - abi_long len; - len = target_strlen(guest_addr); - if (len < 0) - return NULL; - return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1); -} +void *lock_user_string(abi_ulong guest_addr); /* Helper macros for locking/unlocking a target struct. */ #define lock_user_struct(type, host_ptr, guest_addr, copy) \ diff --git a/linux-user/uaccess.c b/linux-user/uaccess.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/uaccess.c +++ b/linux-user/uaccess.c @@ -XXX,XX +XXX,XX @@ #include "qemu.h" +void *lock_user(int type, abi_ulong guest_addr, long len, int copy) +{ + if (!access_ok_untagged(type, guest_addr, len)) { + return NULL; + } +#ifdef DEBUG_REMAP + { + void *addr; + addr = g_malloc(len); + if (copy) { + memcpy(addr, g2h(guest_addr), len); + } else { + memset(addr, 0, len); + } + return addr; + } +#else + return g2h_untagged(guest_addr); +#endif +} + +#ifdef DEBUG_REMAP +void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); +{ + if (!host_ptr) { + return; + } + if (host_ptr == g2h_untagged(guest_addr)) { + return; + } + if (len > 0) { + memcpy(g2h_untagged(guest_addr), host_ptr, len); + } + g_free(host_ptr); +} +#endif + +void *lock_user_string(abi_ulong guest_addr) +{ + abi_long len = target_strlen(guest_addr); + if (len < 0) { + return NULL; + } + return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1); +} + /* copy_from_user() and copy_to_user() are usually used to copy data * buffers between the target and host. These internally perform * locking/unlocking of the memory. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> For copy_*_user, only 0 and -TARGET_EFAULT are returned; no need to involve abi_long. Use size_t for lengths. Use bool for the lock_user copy argument. Use ssize_t for target_strlen, because we can't overflow the host memory space. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-19-richard.henderson@linaro.org [PMM: moved fix for ifdef error to previous commit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 12 +++++------- linux-user/uaccess.c | 45 ++++++++++++++++++++++---------------------- 2 files changed, 28 insertions(+), 29 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #undef DEBUG_REMAP -#ifdef DEBUG_REMAP -#endif /* DEBUG_REMAP */ #include "exec/user/abitypes.h" @@ -XXX,XX +XXX,XX @@ static inline bool access_ok(CPUState *cpu, int type, * buffers between the target and host. These internally perform * locking/unlocking of the memory. */ -abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len); -abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); +int copy_from_user(void *hptr, abi_ulong gaddr, size_t len); +int copy_to_user(abi_ulong gaddr, void *hptr, size_t len); /* Functions for accessing guest memory. The tget and tput functions read/write single values, byteswapping as necessary. The lock_user function @@ -XXX,XX +XXX,XX @@ abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); /* Lock an area of guest memory into the host. If copy is true then the host area will have the same contents as the guest. */ -void *lock_user(int type, abi_ulong guest_addr, long len, int copy); +void *lock_user(int type, abi_ulong guest_addr, size_t len, bool copy); /* Unlock an area of guest memory. The first LEN bytes must be flushed back to guest memory. host_ptr = NULL is explicitly allowed and does nothing. */ #ifndef DEBUG_REMAP -static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, long len) +static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, size_t len) { } #else void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); @@ -XXX,XX +XXX,XX @@ void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); /* Return the length of a string in target memory or -TARGET_EFAULT if access error. */ -abi_long target_strlen(abi_ulong gaddr); +ssize_t target_strlen(abi_ulong gaddr); /* Like lock_user but for null terminated strings. */ void *lock_user_string(abi_ulong guest_addr); diff --git a/linux-user/uaccess.c b/linux-user/uaccess.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/uaccess.c +++ b/linux-user/uaccess.c @@ -XXX,XX +XXX,XX @@ #include "qemu.h" -void *lock_user(int type, abi_ulong guest_addr, long len, int copy) +void *lock_user(int type, abi_ulong guest_addr, size_t len, bool copy) { if (!access_ok_untagged(type, guest_addr, len)) { return NULL; @@ -XXX,XX +XXX,XX @@ void *lock_user(int type, abi_ulong guest_addr, long len, int copy) } #ifdef DEBUG_REMAP -void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); +void unlock_user(void *host_ptr, abi_ulong guest_addr, size_t len); { if (!host_ptr) { return; @@ -XXX,XX +XXX,XX @@ void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); if (host_ptr == g2h_untagged(guest_addr)) { return; } - if (len > 0) { + if (len != 0) { memcpy(g2h_untagged(guest_addr), host_ptr, len); } g_free(host_ptr); @@ -XXX,XX +XXX,XX @@ void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); void *lock_user_string(abi_ulong guest_addr) { - abi_long len = target_strlen(guest_addr); + ssize_t len = target_strlen(guest_addr); if (len < 0) { return NULL; } - return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1); + return lock_user(VERIFY_READ, guest_addr, (size_t)len + 1, 1); } /* copy_from_user() and copy_to_user() are usually used to copy data * buffers between the target and host. These internally perform * locking/unlocking of the memory. */ -abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len) +int copy_from_user(void *hptr, abi_ulong gaddr, size_t len) { - abi_long ret = 0; - void *ghptr; + int ret = 0; + void *ghptr = lock_user(VERIFY_READ, gaddr, len, 1); - if ((ghptr = lock_user(VERIFY_READ, gaddr, len, 1))) { + if (ghptr) { memcpy(hptr, ghptr, len); unlock_user(ghptr, gaddr, 0); - } else + } else { ret = -TARGET_EFAULT; - + } return ret; } - -abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len) +int copy_to_user(abi_ulong gaddr, void *hptr, size_t len) { - abi_long ret = 0; - void *ghptr; + int ret = 0; + void *ghptr = lock_user(VERIFY_WRITE, gaddr, len, 0); - if ((ghptr = lock_user(VERIFY_WRITE, gaddr, len, 0))) { + if (ghptr) { memcpy(ghptr, hptr, len); unlock_user(ghptr, gaddr, len); - } else + } else { ret = -TARGET_EFAULT; + } return ret; } /* Return the length of a string in target memory or -TARGET_EFAULT if access error */ -abi_long target_strlen(abi_ulong guest_addr1) +ssize_t target_strlen(abi_ulong guest_addr1) { uint8_t *ptr; abi_ulong guest_addr; - int max_len, len; + size_t max_len, len; guest_addr = guest_addr1; for(;;) { @@ -XXX,XX +XXX,XX @@ abi_long target_strlen(abi_ulong guest_addr1) unlock_user(ptr, guest_addr, 0); guest_addr += len; /* we don't allow wrapping or integer overflow */ - if (guest_addr == 0 || - (guest_addr - guest_addr1) > 0x7fffffff) + if (guest_addr == 0 || (guest_addr - guest_addr1) > 0x7fffffff) { return -TARGET_EFAULT; - if (len != max_len) + } + if (len != max_len) { break; + } } return guest_addr - guest_addr1; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Resolve the untagged address once, using thread_cpu. Tidy the DEBUG_REMAP code using glib routines. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/uaccess.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/linux-user/uaccess.c b/linux-user/uaccess.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/uaccess.c +++ b/linux-user/uaccess.c @@ -XXX,XX +XXX,XX @@ void *lock_user(int type, abi_ulong guest_addr, size_t len, bool copy) { + void *host_addr; + + guest_addr = cpu_untagged_addr(thread_cpu, guest_addr); if (!access_ok_untagged(type, guest_addr, len)) { return NULL; } + host_addr = g2h_untagged(guest_addr); #ifdef DEBUG_REMAP - { - void *addr; - addr = g_malloc(len); - if (copy) { - memcpy(addr, g2h(guest_addr), len); - } else { - memset(addr, 0, len); - } - return addr; + if (copy) { + host_addr = g_memdup(host_addr, len); + } else { + host_addr = g_malloc0(len); } -#else - return g2h_untagged(guest_addr); #endif + return host_addr; } #ifdef DEBUG_REMAP void unlock_user(void *host_ptr, abi_ulong guest_addr, size_t len); { + void *host_ptr_conv; + if (!host_ptr) { return; } - if (host_ptr == g2h_untagged(guest_addr)) { + host_ptr_conv = g2h(thread_cpu, guest_addr); + if (host_ptr == host_ptr_conv) { return; } if (len != 0) { - memcpy(g2h_untagged(guest_addr), host_ptr, len); + memcpy(host_ptr_conv, host_ptr, len); } g_free(host_ptr); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the prctl bit that controls whether syscalls accept tagged addresses. See Documentation/arm64/tagged-address-abi.rst in the linux kernel. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_syscall.h | 4 ++++ target/arm/cpu-param.h | 3 +++ target/arm/cpu.h | 31 +++++++++++++++++++++++++++++ linux-user/syscall.c | 24 ++++++++++++++++++++++ 4 files changed, 62 insertions(+) diff --git a/linux-user/aarch64/target_syscall.h b/linux-user/aarch64/target_syscall.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_syscall.h +++ b/linux-user/aarch64/target_syscall.h @@ -XXX,XX +XXX,XX @@ struct target_pt_regs { # define TARGET_PR_PAC_APDBKEY (1 << 3) # define TARGET_PR_PAC_APGAKEY (1 << 4) +#define TARGET_PR_SET_TAGGED_ADDR_CTRL 55 +#define TARGET_PR_GET_TAGGED_ADDR_CTRL 56 +# define TARGET_PR_TAGGED_ADDR_ENABLE (1UL << 0) + #endif /* AARCH64_TARGET_SYSCALL_H */ diff --git a/target/arm/cpu-param.h b/target/arm/cpu-param.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-param.h +++ b/target/arm/cpu-param.h @@ -XXX,XX +XXX,XX @@ #ifdef CONFIG_USER_ONLY #define TARGET_PAGE_BITS 12 +# ifdef TARGET_AARCH64 +# define TARGET_TAGGED_ADDRESSES +# endif #else /* * ARMv7 and later CPUs have 4K pages minimum, but ARMv5 and v6 diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; + +#ifdef TARGET_TAGGED_ADDRESSES + /* Linux syscall tagged address support */ + bool tagged_addr_enable; +#endif } CPUARMState; static inline void set_feature(CPUARMState *env, int feature) @@ -XXX,XX +XXX,XX @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) */ #define PAGE_BTI PAGE_TARGET_1 +#ifdef TARGET_TAGGED_ADDRESSES +/** + * cpu_untagged_addr: + * @cs: CPU context + * @x: tagged address + * + * Remove any address tag from @x. This is explicitly related to the + * linux syscall TIF_TAGGED_ADDR setting, not TBI in general. + * + * There should be a better place to put this, but we need this in + * include/exec/cpu_ldst.h, and not some place linux-user specific. + */ +static inline target_ulong cpu_untagged_addr(CPUState *cs, target_ulong x) +{ + ARMCPU *cpu = ARM_CPU(cs); + if (cpu->env.tagged_addr_enable) { + /* + * TBI is enabled for userspace but not kernelspace addresses. + * Only clear the tag if bit 55 is clear. + */ + x &= sextract64(x, 0, 56); + } + return x; +} +#endif + /* * Naming convention for isar_feature functions: * Functions which test 32-bit ID registers should have _aa32_ in diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, } } return -TARGET_EINVAL; + case TARGET_PR_SET_TAGGED_ADDR_CTRL: + { + abi_ulong valid_mask = TARGET_PR_TAGGED_ADDR_ENABLE; + CPUARMState *env = cpu_env; + + if ((arg2 & ~valid_mask) || arg3 || arg4 || arg5) { + return -TARGET_EINVAL; + } + env->tagged_addr_enable = arg2 & TARGET_PR_TAGGED_ADDR_ENABLE; + return 0; + } + case TARGET_PR_GET_TAGGED_ADDR_CTRL: + { + abi_long ret = 0; + CPUARMState *env = cpu_env; + + if (arg2 || arg3 || arg4 || arg5) { + return -TARGET_EINVAL; + } + if (env->tagged_addr_enable) { + ret |= TARGET_PR_TAGGED_ADDR_ENABLE; + } + return ret; + } #endif /* AARCH64 */ case PR_GET_SECCOMP: case PR_SET_SECCOMP: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use simple arithmetic instead of a conditional move when tbi0 != tbi1. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_top_byte_ignore(DisasContext *s, TCGv_i64 dst, /* Sign-extend from bit 55. */ tcg_gen_sextract_i64(dst, src, 0, 56); - if (tbi != 3) { - TCGv_i64 tcg_zero = tcg_const_i64(0); - - /* - * The two TBI bits differ. - * If tbi0, then !tbi1: only use the extension if positive. - * if !tbi0, then tbi1: only use the extension if negative. - */ - tcg_gen_movcond_i64(tbi == 1 ? TCG_COND_GE : TCG_COND_LT, - dst, dst, tcg_zero, dst, src); - tcg_temp_free_i64(tcg_zero); + switch (tbi) { + case 1: + /* tbi0 but !tbi1: only use the extension if positive */ + tcg_gen_and_i64(dst, dst, src); + break; + case 2: + /* !tbi0 but tbi1: only use the extension if negative */ + tcg_gen_or_i64(dst, dst, src); + break; + case 3: + /* tbi0 and tbi1: always use the extension */ + break; + default: + g_assert_not_reached(); } } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We were fudging TBI1 enabled to speed up the generated code. Now that we've improved the code generation, remove this. Also, tidy the comment to reflect the current code. The pauth test was testing a kernel address (-1) and making incorrect assumptions about TBI1; stick to userland addresses. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 4 ++-- target/arm/cpu.c | 10 +++------- tests/tcg/aarch64/pauth-2.c | 1 - 3 files changed, 5 insertions(+), 10 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline bool tcma_check(uint32_t desc, int bit55, int ptr_tag) */ static inline uint64_t useronly_clean_ptr(uint64_t ptr) { - /* TBI is known to be enabled. */ #ifdef CONFIG_USER_ONLY - ptr = sextract64(ptr, 0, 56); + /* TBI0 is known to be enabled, while TBI1 is disabled. */ + ptr &= sextract64(ptr, 0, 56); #endif return ptr; } diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->vfp.zcr_el[1] = MIN(cpu->sve_max_vq - 1, 3); } /* - * Enable TBI0 and TBI1. While the real kernel only enables TBI0, - * turning on both here will produce smaller code and otherwise - * make no difference to the user-level emulation. - * - * In sve_probe_page, we assume that this is set. - * Do not modify this without other changes. + * Enable TBI0 but not TBI1. + * Note that this must match useronly_clean_ptr. */ - env->cp15.tcr_el[1].raw_tcr = (3ULL << 37); + env->cp15.tcr_el[1].raw_tcr = (1ULL << 37); #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/tests/tcg/aarch64/pauth-2.c b/tests/tcg/aarch64/pauth-2.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/pauth-2.c +++ b/tests/tcg/aarch64/pauth-2.c @@ -XXX,XX +XXX,XX @@ void do_test(uint64_t value) int main() { do_test(0); - do_test(-1); do_test(0xda004acedeadbeefull); return 0; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These prctl fields are required for the function of MTE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_syscall.h | 9 ++++++ linux-user/syscall.c | 43 +++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) diff --git a/linux-user/aarch64/target_syscall.h b/linux-user/aarch64/target_syscall.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_syscall.h +++ b/linux-user/aarch64/target_syscall.h @@ -XXX,XX +XXX,XX @@ struct target_pt_regs { #define TARGET_PR_SET_TAGGED_ADDR_CTRL 55 #define TARGET_PR_GET_TAGGED_ADDR_CTRL 56 # define TARGET_PR_TAGGED_ADDR_ENABLE (1UL << 0) +/* MTE tag check fault modes */ +# define TARGET_PR_MTE_TCF_SHIFT 1 +# define TARGET_PR_MTE_TCF_NONE (0UL << TARGET_PR_MTE_TCF_SHIFT) +# define TARGET_PR_MTE_TCF_SYNC (1UL << TARGET_PR_MTE_TCF_SHIFT) +# define TARGET_PR_MTE_TCF_ASYNC (2UL << TARGET_PR_MTE_TCF_SHIFT) +# define TARGET_PR_MTE_TCF_MASK (3UL << TARGET_PR_MTE_TCF_SHIFT) +/* MTE tag inclusion mask */ +# define TARGET_PR_MTE_TAG_SHIFT 3 +# define TARGET_PR_MTE_TAG_MASK (0xffffUL << TARGET_PR_MTE_TAG_SHIFT) #endif /* AARCH64_TARGET_SYSCALL_H */ diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, { abi_ulong valid_mask = TARGET_PR_TAGGED_ADDR_ENABLE; CPUARMState *env = cpu_env; + ARMCPU *cpu = env_archcpu(env); + + if (cpu_isar_feature(aa64_mte, cpu)) { + valid_mask |= TARGET_PR_MTE_TCF_MASK; + valid_mask |= TARGET_PR_MTE_TAG_MASK; + } if ((arg2 & ~valid_mask) || arg3 || arg4 || arg5) { return -TARGET_EINVAL; } env->tagged_addr_enable = arg2 & TARGET_PR_TAGGED_ADDR_ENABLE; + + if (cpu_isar_feature(aa64_mte, cpu)) { + switch (arg2 & TARGET_PR_MTE_TCF_MASK) { + case TARGET_PR_MTE_TCF_NONE: + case TARGET_PR_MTE_TCF_SYNC: + case TARGET_PR_MTE_TCF_ASYNC: + break; + default: + return -EINVAL; + } + + /* + * Write PR_MTE_TCF to SCTLR_EL1[TCF0]. + * Note that the syscall values are consistent with hw. + */ + env->cp15.sctlr_el[1] = + deposit64(env->cp15.sctlr_el[1], 38, 2, + arg2 >> TARGET_PR_MTE_TCF_SHIFT); + + /* + * Write PR_MTE_TAG to GCR_EL1[Exclude]. + * Note that the syscall uses an include mask, + * and hardware uses an exclude mask -- invert. + */ + env->cp15.gcr_el1 = + deposit64(env->cp15.gcr_el1, 0, 16, + ~arg2 >> TARGET_PR_MTE_TAG_SHIFT); + arm_rebuild_hflags(env); + } return 0; } case TARGET_PR_GET_TAGGED_ADDR_CTRL: { abi_long ret = 0; CPUARMState *env = cpu_env; + ARMCPU *cpu = env_archcpu(env); if (arg2 || arg3 || arg4 || arg5) { return -TARGET_EINVAL; @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, if (env->tagged_addr_enable) { ret |= TARGET_PR_TAGGED_ADDR_ENABLE; } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* See above. */ + ret |= (extract64(env->cp15.sctlr_el[1], 38, 2) + << TARGET_PR_MTE_TCF_SHIFT); + ret = deposit64(ret, TARGET_PR_MTE_TAG_SHIFT, 16, + ~env->cp15.gcr_el1); + } return ret; } #endif /* AARCH64 */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2. Otherwise this does not yet have effect. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 1 + linux-user/syscall_defs.h | 1 + target/arm/cpu.h | 1 + linux-user/mmap.c | 22 ++++++++++++++-------- 4 files changed, 17 insertions(+), 8 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; #endif /* Target-specific bits that will be used via page_get_flags(). */ #define PAGE_TARGET_1 0x0080 +#define PAGE_TARGET_2 0x0200 #if defined(CONFIG_USER_ONLY) void page_dump(FILE *f); diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall_defs.h +++ b/linux-user/syscall_defs.h @@ -XXX,XX +XXX,XX @@ struct target_winsize { #ifdef TARGET_AARCH64 #define TARGET_PROT_BTI 0x10 +#define TARGET_PROT_MTE 0x20 #endif /* Common */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) * AArch64 usage of the PAGE_TARGET_* bits for linux-user. */ #define PAGE_BTI PAGE_TARGET_1 +#define PAGE_MTE PAGE_TARGET_2 #ifdef TARGET_TAGGED_ADDRESSES /** diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ static int validate_prot_to_pageflags(int *host_prot, int prot) | (prot & PROT_EXEC ? PROT_READ : 0); #ifdef TARGET_AARCH64 - /* - * The PROT_BTI bit is only accepted if the cpu supports the feature. - * Since this is the unusual case, don't bother checking unless - * the bit has been requested. If set and valid, record the bit - * within QEMU's page_flags. - */ - if (prot & TARGET_PROT_BTI) { + { ARMCPU *cpu = ARM_CPU(thread_cpu); - if (cpu_isar_feature(aa64_bti, cpu)) { + + /* + * The PROT_BTI bit is only accepted if the cpu supports the feature. + * Since this is the unusual case, don't bother checking unless + * the bit has been requested. If set and valid, record the bit + * within QEMU's page_flags. + */ + if ((prot & TARGET_PROT_BTI) && cpu_isar_feature(aa64_bti, cpu)) { valid |= TARGET_PROT_BTI; page_flags |= PAGE_BTI; } + /* Similarly for the PROT_MTE bit. */ + if ((prot & TARGET_PROT_MTE) && cpu_isar_feature(aa64_mte, cpu)) { + valid |= TARGET_PROT_MTE; + page_flags |= PAGE_MTE; + } } #endif -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Move everything related to syndromes to a new file, which can be shared with linux-user. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 245 +----------------------------------- target/arm/syndrome.h | 273 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 274 insertions(+), 244 deletions(-) create mode 100644 target/arm/syndrome.h diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #define TARGET_ARM_INTERNALS_H #include "hw/registerfields.h" +#include "syndrome.h" /* register banks for CPU modes */ #define BANK_USRSYS 0 @@ -XXX,XX +XXX,XX @@ static inline bool extended_addresses_enabled(CPUARMState *env) (arm_feature(env, ARM_FEATURE_LPAE) && (tcr->raw_tcr & TTBCR_EAE)); } -/* Valid Syndrome Register EC field values */ -enum arm_exception_class { - EC_UNCATEGORIZED = 0x00, - EC_WFX_TRAP = 0x01, - EC_CP15RTTRAP = 0x03, - EC_CP15RRTTRAP = 0x04, - EC_CP14RTTRAP = 0x05, - EC_CP14DTTRAP = 0x06, - EC_ADVSIMDFPACCESSTRAP = 0x07, - EC_FPIDTRAP = 0x08, - EC_PACTRAP = 0x09, - EC_CP14RRTTRAP = 0x0c, - EC_BTITRAP = 0x0d, - EC_ILLEGALSTATE = 0x0e, - EC_AA32_SVC = 0x11, - EC_AA32_HVC = 0x12, - EC_AA32_SMC = 0x13, - EC_AA64_SVC = 0x15, - EC_AA64_HVC = 0x16, - EC_AA64_SMC = 0x17, - EC_SYSTEMREGISTERTRAP = 0x18, - EC_SVEACCESSTRAP = 0x19, - EC_INSNABORT = 0x20, - EC_INSNABORT_SAME_EL = 0x21, - EC_PCALIGNMENT = 0x22, - EC_DATAABORT = 0x24, - EC_DATAABORT_SAME_EL = 0x25, - EC_SPALIGNMENT = 0x26, - EC_AA32_FPTRAP = 0x28, - EC_AA64_FPTRAP = 0x2c, - EC_SERROR = 0x2f, - EC_BREAKPOINT = 0x30, - EC_BREAKPOINT_SAME_EL = 0x31, - EC_SOFTWARESTEP = 0x32, - EC_SOFTWARESTEP_SAME_EL = 0x33, - EC_WATCHPOINT = 0x34, - EC_WATCHPOINT_SAME_EL = 0x35, - EC_AA32_BKPT = 0x38, - EC_VECTORCATCH = 0x3a, - EC_AA64_BKPT = 0x3c, -}; - -#define ARM_EL_EC_SHIFT 26 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -static inline uint32_t syn_get_ec(uint32_t syn) -{ - return syn >> ARM_EL_EC_SHIFT; -} - -/* Utility functions for constructing various kinds of syndrome value. - * Note that in general we follow the AArch64 syndrome values; in a - * few cases the value in HSR for exceptions taken to AArch32 Hyp - * mode differs slightly, and we fix this up when populating HSR in - * arm_cpu_do_interrupt_aarch32_hyp(). - * The exception is FP/SIMD access traps -- these report extra information - * when taking an exception to AArch32. For those we include the extra coproc - * and TA fields, and mask them out when taking the exception to AArch64. - */ -static inline uint32_t syn_uncategorized(void) -{ - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; -} - -static inline uint32_t syn_aa64_svc(uint32_t imm16) -{ - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa64_hvc(uint32_t imm16) -{ - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa64_smc(uint32_t imm16) -{ - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) -{ - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); -} - -static inline uint32_t syn_aa32_hvc(uint32_t imm16) -{ - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa32_smc(void) -{ - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; -} - -static inline uint32_t syn_aa64_bkpt(uint32_t imm16) -{ - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) -{ - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); -} - -static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, - int crn, int crm, int rt, - int isread) -{ - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; -} - -static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, - int crn, int crm, int rt, int isread, - bool is_16bit) -{ - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; -} - -static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, - int crn, int crm, int rt, int isread, - bool is_16bit) -{ - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; -} - -static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, - int rt, int rt2, int isread, - bool is_16bit) -{ - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; -} - -static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, - int rt, int rt2, int isread, - bool is_16bit) -{ - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; -} - -static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 coproc == 0xa */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | 0xa; -} - -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); -} - -static inline uint32_t syn_sve_access_trap(void) -{ - return EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT; -} - -static inline uint32_t syn_pactrap(void) -{ - return EC_PACTRAP << ARM_EL_EC_SHIFT; -} - -static inline uint32_t syn_btitrap(int btype) -{ - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | btype; -} - -static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -{ - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; -} - -static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, - int ea, int cm, int s1ptw, - int wnr, int fsc) -{ - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; -} - -static inline uint32_t syn_data_abort_with_iss(int same_el, - int sas, int sse, int srt, - int sf, int ar, - int ea, int cm, int s1ptw, - int wnr, int fsc, - bool is_16bit) -{ - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; -} - -static inline uint32_t syn_swstep(int same_el, int isv, int ex) -{ - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; -} - -static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) -{ - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; -} - -static inline uint32_t syn_breakpoint(int same_el) -{ - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; -} - -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -{ - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; -} - /* Update a QEMU watchpoint based on the information the guest has set in the * DBGWCR<n>_EL1 and DBGWVR<n>_EL1 registers. */ diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARM CPU -- syndrome functions and types + * + * Copyright (c) 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This header defines functions, types, etc which need to be shared + * between different source files within target/arm/ but which are + * private to it and not required by the rest of QEMU. + */ + +#ifndef TARGET_ARM_SYNDROME_H +#define TARGET_ARM_SYNDROME_H + +/* Valid Syndrome Register EC field values */ +enum arm_exception_class { + EC_UNCATEGORIZED = 0x00, + EC_WFX_TRAP = 0x01, + EC_CP15RTTRAP = 0x03, + EC_CP15RRTTRAP = 0x04, + EC_CP14RTTRAP = 0x05, + EC_CP14DTTRAP = 0x06, + EC_ADVSIMDFPACCESSTRAP = 0x07, + EC_FPIDTRAP = 0x08, + EC_PACTRAP = 0x09, + EC_CP14RRTTRAP = 0x0c, + EC_BTITRAP = 0x0d, + EC_ILLEGALSTATE = 0x0e, + EC_AA32_SVC = 0x11, + EC_AA32_HVC = 0x12, + EC_AA32_SMC = 0x13, + EC_AA64_SVC = 0x15, + EC_AA64_HVC = 0x16, + EC_AA64_SMC = 0x17, + EC_SYSTEMREGISTERTRAP = 0x18, + EC_SVEACCESSTRAP = 0x19, + EC_INSNABORT = 0x20, + EC_INSNABORT_SAME_EL = 0x21, + EC_PCALIGNMENT = 0x22, + EC_DATAABORT = 0x24, + EC_DATAABORT_SAME_EL = 0x25, + EC_SPALIGNMENT = 0x26, + EC_AA32_FPTRAP = 0x28, + EC_AA64_FPTRAP = 0x2c, + EC_SERROR = 0x2f, + EC_BREAKPOINT = 0x30, + EC_BREAKPOINT_SAME_EL = 0x31, + EC_SOFTWARESTEP = 0x32, + EC_SOFTWARESTEP_SAME_EL = 0x33, + EC_WATCHPOINT = 0x34, + EC_WATCHPOINT_SAME_EL = 0x35, + EC_AA32_BKPT = 0x38, + EC_VECTORCATCH = 0x3a, + EC_AA64_BKPT = 0x3c, +}; + +#define ARM_EL_EC_SHIFT 26 +#define ARM_EL_IL_SHIFT 25 +#define ARM_EL_ISV_SHIFT 24 +#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) +#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) + +static inline uint32_t syn_get_ec(uint32_t syn) +{ + return syn >> ARM_EL_EC_SHIFT; +} + +/* + * Utility functions for constructing various kinds of syndrome value. + * Note that in general we follow the AArch64 syndrome values; in a + * few cases the value in HSR for exceptions taken to AArch32 Hyp + * mode differs slightly, and we fix this up when populating HSR in + * arm_cpu_do_interrupt_aarch32_hyp(). + * The exception is FP/SIMD access traps -- these report extra information + * when taking an exception to AArch32. For those we include the extra coproc + * and TA fields, and mask them out when taking the exception to AArch64. + */ +static inline uint32_t syn_uncategorized(void) +{ + return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + +static inline uint32_t syn_aa64_svc(uint32_t imm16) +{ + return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa64_hvc(uint32_t imm16) +{ + return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa64_smc(uint32_t imm16) +{ + return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) +{ + return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) + | (is_16bit ? 0 : ARM_EL_IL); +} + +static inline uint32_t syn_aa32_hvc(uint32_t imm16) +{ + return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa32_smc(void) +{ + return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + +static inline uint32_t syn_aa64_bkpt(uint32_t imm16) +{ + return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) +{ + return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) + | (is_16bit ? 0 : ARM_EL_IL); +} + +static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, + int crn, int crm, int rt, + int isread) +{ + return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL + | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) + | (crm << 1) | isread; +} + +static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, + int crn, int crm, int rt, int isread, + bool is_16bit) +{ + return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) + | (crn << 10) | (rt << 5) | (crm << 1) | isread; +} + +static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, + int crn, int crm, int rt, int isread, + bool is_16bit) +{ + return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) + | (crn << 10) | (rt << 5) | (crm << 1) | isread; +} + +static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, + int rt, int rt2, int isread, + bool is_16bit) +{ + return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (opc1 << 16) + | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; +} + +static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, + int rt, int rt2, int isread, + bool is_16bit) +{ + return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (opc1 << 16) + | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; +} + +static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit) +{ + /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 coproc == 0xa */ + return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | 0xa; +} + +static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) +{ + /* AArch32 SIMD trap: TA == 1 coproc == 0 */ + return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (1 << 5); +} + +static inline uint32_t syn_sve_access_trap(void) +{ + return EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT; +} + +static inline uint32_t syn_pactrap(void) +{ + return EC_PACTRAP << ARM_EL_EC_SHIFT; +} + +static inline uint32_t syn_btitrap(int btype) +{ + return (EC_BTITRAP << ARM_EL_EC_SHIFT) | btype; +} + +static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) +{ + return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; +} + +static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, + int ea, int cm, int s1ptw, + int wnr, int fsc) +{ + return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL + | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) + | (wnr << 6) | fsc; +} + +static inline uint32_t syn_data_abort_with_iss(int same_el, + int sas, int sse, int srt, + int sf, int ar, + int ea, int cm, int s1ptw, + int wnr, int fsc, + bool is_16bit) +{ + return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) + | (sf << 15) | (ar << 14) + | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; +} + +static inline uint32_t syn_swstep(int same_el, int isv, int ex) +{ + return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; +} + +static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) +{ + return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; +} + +static inline uint32_t syn_breakpoint(int same_el) +{ + return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL | 0x22; +} + +static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +{ + return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | + (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | + (cv << 24) | (cond << 20) | ti; +} + +#endif /* TARGET_ARM_SYNDROME_H */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> A proper syndrome is required to fill in the proper si_code. Use page_get_flags to determine permission vs translation for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/cpu_loop.c | 24 +++++++++++++++++++++--- target/arm/tlb_helper.c | 15 +++++++++------ 2 files changed, 30 insertions(+), 9 deletions(-) diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ #include "cpu_loop-common.h" #include "qemu/guest-random.h" #include "hw/semihosting/common-semi.h" +#include "target/arm/syndrome.h" #define get_user_code_u32(x, gaddr, env) \ ({ abi_long __r = get_user_u32((x), (gaddr)); \ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) { CPUState *cs = env_cpu(env); - int trapnr; + int trapnr, ec, fsc; abi_long ret; target_siginfo_t info; @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) case EXCP_DATA_ABORT: info.si_signo = TARGET_SIGSEGV; info.si_errno = 0; - /* XXX: check env->error_code */ - info.si_code = TARGET_SEGV_MAPERR; info._sifields._sigfault._addr = env->exception.vaddress; + + /* We should only arrive here with EC in {DATAABORT, INSNABORT}. */ + ec = syn_get_ec(env->exception.syndrome); + assert(ec == EC_DATAABORT || ec == EC_INSNABORT); + + /* Both EC have the same format for FSC, or close enough. */ + fsc = extract32(env->exception.syndrome, 0, 6); + switch (fsc) { + case 0x04 ... 0x07: /* Translation fault, level {0-3} */ + info.si_code = TARGET_SEGV_MAPERR; + break; + case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ + case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ + info.si_code = TARGET_SEGV_ACCERR; + break; + default: + g_assert_not_reached(); + } + queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); break; case EXCP_DEBUG: diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, bool probe, uintptr_t retaddr) { ARMCPU *cpu = ARM_CPU(cs); + ARMMMUFaultInfo fi = {}; #ifdef CONFIG_USER_ONLY - cpu->env.exception.vaddress = address; - if (access_type == MMU_INST_FETCH) { - cs->exception_index = EXCP_PREFETCH_ABORT; + int flags = page_get_flags(useronly_clean_ptr(address)); + if (flags & PAGE_VALID) { + fi.type = ARMFault_Permission; } else { - cs->exception_index = EXCP_DATA_ABORT; + fi.type = ARMFault_Translation; } - cpu_loop_exit_restore(cs, retaddr); + + /* now we have a real cpu fault */ + cpu_restore_state(cs, retaddr, true); + arm_deliver_fault(cpu, address, access_type, mmu_idx, &fi); #else hwaddr phys_addr; target_ulong page_size; int prot, ret; MemTxAttrs attrs = {}; - ARMMMUFaultInfo fi = {}; ARMCacheAttrs cacheattrs = {}; /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_signal.h | 2 ++ linux-user/aarch64/cpu_loop.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/linux-user/aarch64/target_signal.h b/linux-user/aarch64/target_signal.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_signal.h +++ b/linux-user/aarch64/target_signal.h @@ -XXX,XX +XXX,XX @@ typedef struct target_sigaltstack { #include "../generic/signal.h" +#define TARGET_SEGV_MTESERR 9 /* Synchronous ARM MTE exception */ + #define TARGET_ARCH_HAS_SETUP_FRAME #endif /* AARCH64_TARGET_SIGNAL_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ info.si_code = TARGET_SEGV_ACCERR; break; + case 0x11: /* Synchronous Tag Check Fault */ + info.si_code = TARGET_SEGV_MTESERR; + break; default: g_assert_not_reached(); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The real kernel collects _TIF_MTE_ASYNC_FAULT into the current thread's state on any kernel entry (interrupt, exception etc), and then delivers the signal in advance of resuming the thread. This means that while the signal won't be delivered immediately, it will not be delayed forever -- at minimum it will be delivered after the next clock interrupt. We don't have a clock interrupt in linux-user, so we issue a cpu_kick to signal a return to the main loop at the end of the current TB. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_signal.h | 1 + linux-user/aarch64/cpu_loop.c | 11 +++++++++++ target/arm/mte_helper.c | 10 ++++++++++ 3 files changed, 22 insertions(+) diff --git a/linux-user/aarch64/target_signal.h b/linux-user/aarch64/target_signal.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_signal.h +++ b/linux-user/aarch64/target_signal.h @@ -XXX,XX +XXX,XX @@ typedef struct target_sigaltstack { #include "../generic/signal.h" +#define TARGET_SEGV_MTEAERR 8 /* Asynchronous ARM MTE error */ #define TARGET_SEGV_MTESERR 9 /* Synchronous ARM MTE exception */ #define TARGET_ARCH_HAS_SETUP_FRAME diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) EXCP_DUMP(env, "qemu: unhandled CPU exception 0x%x - aborting\n", trapnr); abort(); } + + /* Check for MTE asynchronous faults */ + if (unlikely(env->cp15.tfsr_el[0])) { + env->cp15.tfsr_el[0] = 0; + info.si_signo = TARGET_SIGSEGV; + info.si_errno = 0; + info._sifields._sigfault._addr = 0; + info.si_code = TARGET_SEGV_MTEAERR; + queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); + } + process_pending_signals(env); /* Exception return on AArch64 always clears the exclusive monitor, * so any return to running guest code implies this. diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc, select = 0; } env->cp15.tfsr_el[el] |= 1 << select; +#ifdef CONFIG_USER_ONLY + /* + * Stand in for a timer irq, setting _TIF_MTE_ASYNC_FAULT, + * which then sends a SIGSEGV when the thread is next scheduled. + * This cpu will return to the main loop at the end of the TB, + * which is rather sooner than "normal". But the alternative + * is waiting until the next syscall. + */ + qemu_cpu_kick(env_cpu(env)); +#endif break; default: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use the now-saved PAGE_ANON and PAGE_MTE bits, and the per-page saved data. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static uint8_t *allocation_tag_mem(CPUARMState *env, int ptr_mmu_idx, int tag_size, uintptr_t ra) { #ifdef CONFIG_USER_ONLY - /* Tag storage not implemented. */ - return NULL; + uint64_t clean_ptr = useronly_clean_ptr(ptr); + int flags = page_get_flags(clean_ptr); + uint8_t *tags; + uintptr_t index; + + if (!(flags & (ptr_access == MMU_DATA_STORE ? PAGE_WRITE : PAGE_READ))) { + /* SIGSEGV */ + arm_cpu_tlb_fill(env_cpu(env), ptr, ptr_size, ptr_access, + ptr_mmu_idx, false, ra); + g_assert_not_reached(); + } + + /* Require both MAP_ANON and PROT_MTE for the page. */ + if (!(flags & PAGE_ANON) || !(flags & PAGE_MTE)) { + return NULL; + } + + tags = page_get_target_data(clean_ptr); + if (tags == NULL) { + size_t alloc_size = TARGET_PAGE_SIZE >> (LOG2_TAG_GRANULE + 1); + tags = page_alloc_target_data(clean_ptr, alloc_size); + assert(tags != NULL); + } + + index = extract32(ptr, LOG2_TAG_GRANULE + 1, + TARGET_PAGE_BITS - LOG2_TAG_GRANULE - 1); + return tags + index; #else uintptr_t index; CPUIOTLBEntry *iotlbentry; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) * Note that this must match useronly_clean_ptr. */ env->cp15.tcr_el[1].raw_tcr = (1ULL << 37); + + /* Enable MTE */ + if (cpu_isar_feature(aa64_mte, cpu)) { + /* Enable tag access, but leave TCF0 as No Effect (0). */ + env->cp15.sctlr_el[1] |= SCTLR_ATA0; + /* + * Exclude all tags, so that tag 0 is always used. + * This corresponds to Linux current->thread.gcr_incl = 0. + * + * Set RRND, so that helper_irg() will generate a seed later. + * Here in cpu_reset(), the crypto subsystem has not yet been + * initialized. + */ + env->cp15.gcr_el1 = 0x1ffff; + } #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/mte.h | 60 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/mte-1.c | 28 +++++++++++++++ tests/tcg/aarch64/mte-2.c | 45 +++++++++++++++++++++++ tests/tcg/aarch64/mte-3.c | 51 ++++++++++++++++++++++++++ tests/tcg/aarch64/mte-4.c | 45 +++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 6 ++++ tests/tcg/configure.sh | 4 +++ 7 files changed, 239 insertions(+) create mode 100644 tests/tcg/aarch64/mte.h create mode 100644 tests/tcg/aarch64/mte-1.c create mode 100644 tests/tcg/aarch64/mte-2.c create mode 100644 tests/tcg/aarch64/mte-3.c create mode 100644 tests/tcg/aarch64/mte-4.c diff --git a/tests/tcg/aarch64/mte.h b/tests/tcg/aarch64/mte.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte.h @@ -XXX,XX +XXX,XX @@ +/* + * Linux kernel fallback API definitions for MTE and test helpers. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <assert.h> +#include <string.h> +#include <stdlib.h> +#include <stdio.h> +#include <unistd.h> +#include <signal.h> +#include <sys/mman.h> +#include <sys/prctl.h> + +#ifndef PR_SET_TAGGED_ADDR_CTRL +# define PR_SET_TAGGED_ADDR_CTRL 55 +#endif +#ifndef PR_TAGGED_ADDR_ENABLE +# define PR_TAGGED_ADDR_ENABLE (1UL << 0) +#endif +#ifndef PR_MTE_TCF_SHIFT +# define PR_MTE_TCF_SHIFT 1 +# define PR_MTE_TCF_NONE (0UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_SYNC (1UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_ASYNC (2UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TAG_SHIFT 3 +#endif + +#ifndef PROT_MTE +# define PROT_MTE 0x20 +#endif + +#ifndef SEGV_MTEAERR +# define SEGV_MTEAERR 8 +# define SEGV_MTESERR 9 +#endif + +static void enable_mte(int tcf) +{ + int r = prctl(PR_SET_TAGGED_ADDR_CTRL, + PR_TAGGED_ADDR_ENABLE | tcf | (0xfffe << PR_MTE_TAG_SHIFT), + 0, 0, 0); + if (r < 0) { + perror("PR_SET_TAGGED_ADDR_CTRL"); + exit(2); + } +} + +static void *alloc_mte_mem(size_t size) +{ + void *p = mmap(NULL, size, PROT_READ | PROT_WRITE | PROT_MTE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (p == MAP_FAILED) { + perror("mmap PROT_MTE"); + exit(2); + } + return p; +} diff --git a/tests/tcg/aarch64/mte-1.c b/tests/tcg/aarch64/mte-1.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-1.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, basic pass cases. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +int main(int ac, char **av) +{ + int *p0, *p1, *p2; + long c; + + enable_mte(PR_MTE_TCF_NONE); + p0 = alloc_mte_mem(sizeof(*p0)); + + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(1)); + assert(p1 != p0); + asm("subp %0,%1,%2" : "=r"(c) : "r"(p0), "r"(p1)); + assert(c == 0); + + asm("stg %0, [%0]" : : "r"(p1)); + asm("ldg %0, [%1]" : "=r"(p2) : "r"(p0), "0"(p0)); + assert(p1 == p2); + + return 0; +} diff --git a/tests/tcg/aarch64/mte-2.c b/tests/tcg/aarch64/mte-2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-2.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, basic fail cases, synchronous signals. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +void pass(int sig, siginfo_t *info, void *uc) +{ + assert(info->si_code == SEGV_MTESERR); + exit(0); +} + +int main(int ac, char **av) +{ + struct sigaction sa; + int *p0, *p1, *p2; + long excl = 1; + + enable_mte(PR_MTE_TCF_SYNC); + p0 = alloc_mte_mem(sizeof(*p0)); + + /* Create two differently tagged pointers. */ + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(excl)); + asm("gmi %0,%1,%0" : "+r"(excl) : "r" (p1)); + assert(excl != 1); + asm("irg %0,%1,%2" : "=r"(p2) : "r"(p0), "r"(excl)); + assert(p1 != p2); + + /* Store the tag from the first pointer. */ + asm("stg %0, [%0]" : : "r"(p1)); + + *p1 = 0; + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = pass; + sa.sa_flags = SA_SIGINFO; + sigaction(SIGSEGV, &sa, NULL); + + *p2 = 0; + + abort(); +} diff --git a/tests/tcg/aarch64/mte-3.c b/tests/tcg/aarch64/mte-3.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-3.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, basic fail cases, asynchronous signals. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +void pass(int sig, siginfo_t *info, void *uc) +{ + assert(info->si_code == SEGV_MTEAERR); + exit(0); +} + +int main(int ac, char **av) +{ + struct sigaction sa; + long *p0, *p1, *p2; + long excl = 1; + + enable_mte(PR_MTE_TCF_ASYNC); + p0 = alloc_mte_mem(sizeof(*p0)); + + /* Create two differently tagged pointers. */ + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(excl)); + asm("gmi %0,%1,%0" : "+r"(excl) : "r" (p1)); + assert(excl != 1); + asm("irg %0,%1,%2" : "=r"(p2) : "r"(p0), "r"(excl)); + assert(p1 != p2); + + /* Store the tag from the first pointer. */ + asm("stg %0, [%0]" : : "r"(p1)); + + *p1 = 0; + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = pass; + sa.sa_flags = SA_SIGINFO; + sigaction(SIGSEGV, &sa, NULL); + + /* + * Signal for async error will happen eventually. + * For a real kernel this should be after the next IRQ (e.g. timer). + * For qemu linux-user, we kick the cpu and exit at the next TB. + * In either case, loop until this happens (or killed by timeout). + * For extra sauce, yield, producing EXCP_YIELD to cpu_loop(). + */ + asm("str %0, [%0]; yield" : : "r"(p2)); + while (1); +} diff --git a/tests/tcg/aarch64/mte-4.c b/tests/tcg/aarch64/mte-4.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-4.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, re-reading tag checks. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +void __attribute__((noinline)) tagset(void *p, size_t size) +{ + size_t i; + for (i = 0; i < size; i += 16) { + asm("stg %0, [%0]" : : "r"(p + i)); + } +} + +void __attribute__((noinline)) tagcheck(void *p, size_t size) +{ + size_t i; + void *c; + + for (i = 0; i < size; i += 16) { + asm("ldg %0, [%1]" : "=r"(c) : "r"(p + i), "0"(p)); + assert(c == p); + } +} + +int main(int ac, char **av) +{ + size_t size = getpagesize() * 4; + long excl = 1; + int *p0, *p1; + + enable_mte(PR_MTE_TCF_ASYNC); + p0 = alloc_mte_mem(size); + + /* Tag the pointer. */ + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(excl)); + + tagset(p1, size); + tagcheck(p1, size); + + return 0; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ endif # bti-2 tests PROT_BTI, so no special compiler support required. AARCH64_TESTS += bti-2 +# MTE Tests +ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_MTE),) +AARCH64_TESTS += mte-1 mte-2 mte-3 mte-4 +mte-%: CFLAGS += -march=armv8.5-a+memtag +endif + # Semihosting smoke test for linux-user AARCH64_TESTS += semihosting run-semihosting: semihosting diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh index XXXXXXX..XXXXXXX 100755 --- a/tests/tcg/configure.sh +++ b/tests/tcg/configure.sh @@ -XXX,XX +XXX,XX @@ for target in $target_list; do -mbranch-protection=standard -o $TMPE $TMPC; then echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak fi + if do_compiler "$target_compiler" $target_compiler_cflags \ + -march=armv8.5-a+memtag -o $TMPE $TMPC; then + echo "CROSS_CC_HAS_ARMV8_MTE=y" >> $config_target_mak + fi ;; esac -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/i2c/npcm7xx_smbus.h | 88 ++++ hw/arm/npcm7xx.c | 68 ++- hw/i2c/npcm7xx_smbus.c | 783 +++++++++++++++++++++++++++++++++ hw/i2c/meson.build | 1 + hw/i2c/trace-events | 11 + 7 files changed, 938 insertions(+), 17 deletions(-) create mode 100644 include/hw/i2c/npcm7xx_smbus.h create mode 100644 hw/i2c/npcm7xx_smbus.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * GPIO controller * Analog to Digital Converter (ADC) * Pulse Width Modulation (PWM) + * SMBus controller (SMBF) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controllers (GMAC and EMC) * USB device (USBD) - * SMBus controller (SMBF) * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/adc/npcm7xx_adc.h" #include "hw/cpu/a9mpcore.h" #include "hw/gpio/npcm7xx_gpio.h" +#include "hw/i2c/npcm7xx_smbus.h" #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxMCState mc; NPCM7xxRNGState rng; NPCM7xxGPIOState gpio[8]; + NPCM7xxSMBusState smbus[16]; EHCISysBusState ehci; OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx SMBus Module. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM7XX_SMBUS_H +#define NPCM7XX_SMBUS_H + +#include "exec/memory.h" +#include "hw/i2c/i2c.h" +#include "hw/irq.h" +#include "hw/sysbus.h" + +/* + * Number of addresses this module contains. Do not change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM7XX_SMBUS_NR_ADDRS 10 + +typedef enum NPCM7xxSMBusStatus { + NPCM7XX_SMBUS_STATUS_IDLE, + NPCM7XX_SMBUS_STATUS_SENDING, + NPCM7XX_SMBUS_STATUS_RECEIVING, + NPCM7XX_SMBUS_STATUS_NEGACK, + NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE, + NPCM7XX_SMBUS_STATUS_STOPPING_NEGACK, +} NPCM7xxSMBusStatus; + +/* + * struct NPCM7xxSMBusState - System Management Bus device state. + * @bus: The underlying I2C Bus. + * @irq: GIC interrupt line to fire on events (if enabled). + * @sda: The serial data register. + * @st: The status register. + * @cst: The control status register. + * @cst2: The control status register 2. + * @cst3: The control status register 3. + * @ctl1: The control register 1. + * @ctl2: The control register 2. + * @ctl3: The control register 3. + * @ctl4: The control register 4. + * @ctl5: The control register 5. + * @addr: The SMBus module's own addresses on the I2C bus. + * @scllt: The SCL low time register. + * @sclht: The SCL high time register. + * @status: The current status of the SMBus. + */ +typedef struct NPCM7xxSMBusState { + SysBusDevice parent; + + MemoryRegion iomem; + + I2CBus *bus; + qemu_irq irq; + + uint8_t sda; + uint8_t st; + uint8_t cst; + uint8_t cst2; + uint8_t cst3; + uint8_t ctl1; + uint8_t ctl2; + uint8_t ctl3; + uint8_t ctl4; + uint8_t ctl5; + uint8_t addr[NPCM7XX_SMBUS_NR_ADDRS]; + + uint8_t scllt; + uint8_t sclht; + + NPCM7xxSMBusStatus status; +} NPCM7xxSMBusState; + +#define TYPE_NPCM7XX_SMBUS "npcm7xx-smbus" +#define NPCM7XX_SMBUS(obj) OBJECT_CHECK(NPCM7xxSMBusState, (obj), \ + TYPE_NPCM7XX_SMBUS) + +#endif /* NPCM7XX_SMBUS_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ NPCM7XX_EHCI_IRQ = 61, NPCM7XX_OHCI_IRQ = 62, + NPCM7XX_SMBUS0_IRQ = 64, + NPCM7XX_SMBUS1_IRQ, + NPCM7XX_SMBUS2_IRQ, + NPCM7XX_SMBUS3_IRQ, + NPCM7XX_SMBUS4_IRQ, + NPCM7XX_SMBUS5_IRQ, + NPCM7XX_SMBUS6_IRQ, + NPCM7XX_SMBUS7_IRQ, + NPCM7XX_SMBUS8_IRQ, + NPCM7XX_SMBUS9_IRQ, + NPCM7XX_SMBUS10_IRQ, + NPCM7XX_SMBUS11_IRQ, + NPCM7XX_SMBUS12_IRQ, + NPCM7XX_SMBUS13_IRQ, + NPCM7XX_SMBUS14_IRQ, + NPCM7XX_SMBUS15_IRQ, NPCM7XX_PWM0_IRQ = 93, /* PWM module 0 */ NPCM7XX_PWM1_IRQ, /* PWM module 1 */ NPCM7XX_GPIO0_IRQ = 116, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_pwm_addr[] = { 0xf0104000, }; +/* Direct memory-mapped access to each SMBus Module. */ +static const hwaddr npcm7xx_smbus_addr[] = { + 0xf0080000, + 0xf0081000, + 0xf0082000, + 0xf0083000, + 0xf0084000, + 0xf0085000, + 0xf0086000, + 0xf0087000, + 0xf0088000, + 0xf0089000, + 0xf008a000, + 0xf008b000, + 0xf008c000, + 0xf008d000, + 0xf008e000, + 0xf008f000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "gpio[*]", &s->gpio[i], TYPE_NPCM7XX_GPIO); } + for (i = 0; i < ARRAY_SIZE(s->smbus); i++) { + object_initialize_child(obj, "smbus[*]", &s->smbus[i], + TYPE_NPCM7XX_SMBUS); + } + object_initialize_child(obj, "ehci", &s->ehci, TYPE_NPCM7XX_EHCI); object_initialize_child(obj, "ohci", &s->ohci, TYPE_SYSBUS_OHCI); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) npcm7xx_irq(s, NPCM7XX_GPIO0_IRQ + i)); } + /* SMBus modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_smbus_addr) != ARRAY_SIZE(s->smbus)); + for (i = 0; i < ARRAY_SIZE(s->smbus); i++) { + Object *obj = OBJECT(&s->smbus[i]); + + sysbus_realize(SYS_BUS_DEVICE(obj), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(obj), 0, npcm7xx_smbus_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(obj), 0, + npcm7xx_irq(s, NPCM7XX_SMBUS0_IRQ + i)); + } + /* USB Host */ object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true, &error_abort); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); create_unimplemented_device("npcm7xx.kcs", 0xf0007000, 4 * KiB); create_unimplemented_device("npcm7xx.gfxi", 0xf000e000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[0]", 0xf0080000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[1]", 0xf0081000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[2]", 0xf0082000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[3]", 0xf0083000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[4]", 0xf0084000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[5]", 0xf0085000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[6]", 0xf0086000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[7]", 0xf0087000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[8]", 0xf0088000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[9]", 0xf0089000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[10]", 0xf008a000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[11]", 0xf008b000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[12]", 0xf008c000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[13]", 0xf008d000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[14]", 0xf008e000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[15]", 0xf008f000, 4 * KiB); create_unimplemented_device("npcm7xx.espi", 0xf009f000, 4 * KiB); create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); diff --git a/hw/i2c/npcm7xx_smbus.c b/hw/i2c/npcm7xx_smbus.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/npcm7xx_smbus.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx SMBus Module. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/i2c/npcm7xx_smbus.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/guest-random.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +enum NPCM7xxSMBusCommonRegister { + NPCM7XX_SMB_SDA = 0x0, + NPCM7XX_SMB_ST = 0x2, + NPCM7XX_SMB_CST = 0x4, + NPCM7XX_SMB_CTL1 = 0x6, + NPCM7XX_SMB_ADDR1 = 0x8, + NPCM7XX_SMB_CTL2 = 0xa, + NPCM7XX_SMB_ADDR2 = 0xc, + NPCM7XX_SMB_CTL3 = 0xe, + NPCM7XX_SMB_CST2 = 0x18, + NPCM7XX_SMB_CST3 = 0x19, + NPCM7XX_SMB_VER = 0x1f, +}; + +enum NPCM7xxSMBusBank0Register { + NPCM7XX_SMB_ADDR3 = 0x10, + NPCM7XX_SMB_ADDR7 = 0x11, + NPCM7XX_SMB_ADDR4 = 0x12, + NPCM7XX_SMB_ADDR8 = 0x13, + NPCM7XX_SMB_ADDR5 = 0x14, + NPCM7XX_SMB_ADDR9 = 0x15, + NPCM7XX_SMB_ADDR6 = 0x16, + NPCM7XX_SMB_ADDR10 = 0x17, + NPCM7XX_SMB_CTL4 = 0x1a, + NPCM7XX_SMB_CTL5 = 0x1b, + NPCM7XX_SMB_SCLLT = 0x1c, + NPCM7XX_SMB_FIF_CTL = 0x1d, + NPCM7XX_SMB_SCLHT = 0x1e, +}; + +enum NPCM7xxSMBusBank1Register { + NPCM7XX_SMB_FIF_CTS = 0x10, + NPCM7XX_SMB_FAIR_PER = 0x11, + NPCM7XX_SMB_TXF_CTL = 0x12, + NPCM7XX_SMB_T_OUT = 0x14, + NPCM7XX_SMB_TXF_STS = 0x1a, + NPCM7XX_SMB_RXF_STS = 0x1c, + NPCM7XX_SMB_RXF_CTL = 0x1e, +}; + +/* ST fields */ +#define NPCM7XX_SMBST_STP BIT(7) +#define NPCM7XX_SMBST_SDAST BIT(6) +#define NPCM7XX_SMBST_BER BIT(5) +#define NPCM7XX_SMBST_NEGACK BIT(4) +#define NPCM7XX_SMBST_STASTR BIT(3) +#define NPCM7XX_SMBST_NMATCH BIT(2) +#define NPCM7XX_SMBST_MODE BIT(1) +#define NPCM7XX_SMBST_XMIT BIT(0) + +/* CST fields */ +#define NPCM7XX_SMBCST_ARPMATCH BIT(7) +#define NPCM7XX_SMBCST_MATCHAF BIT(6) +#define NPCM7XX_SMBCST_TGSCL BIT(5) +#define NPCM7XX_SMBCST_TSDA BIT(4) +#define NPCM7XX_SMBCST_GCMATCH BIT(3) +#define NPCM7XX_SMBCST_MATCH BIT(2) +#define NPCM7XX_SMBCST_BB BIT(1) +#define NPCM7XX_SMBCST_BUSY BIT(0) + +/* CST2 fields */ +#define NPCM7XX_SMBCST2_INTSTS BIT(7) +#define NPCM7XX_SMBCST2_MATCH7F BIT(6) +#define NPCM7XX_SMBCST2_MATCH6F BIT(5) +#define NPCM7XX_SMBCST2_MATCH5F BIT(4) +#define NPCM7XX_SMBCST2_MATCH4F BIT(3) +#define NPCM7XX_SMBCST2_MATCH3F BIT(2) +#define NPCM7XX_SMBCST2_MATCH2F BIT(1) +#define NPCM7XX_SMBCST2_MATCH1F BIT(0) + +/* CST3 fields */ +#define NPCM7XX_SMBCST3_EO_BUSY BIT(7) +#define NPCM7XX_SMBCST3_MATCH10F BIT(2) +#define NPCM7XX_SMBCST3_MATCH9F BIT(1) +#define NPCM7XX_SMBCST3_MATCH8F BIT(0) + +/* CTL1 fields */ +#define NPCM7XX_SMBCTL1_STASTRE BIT(7) +#define NPCM7XX_SMBCTL1_NMINTE BIT(6) +#define NPCM7XX_SMBCTL1_GCMEN BIT(5) +#define NPCM7XX_SMBCTL1_ACK BIT(4) +#define NPCM7XX_SMBCTL1_EOBINTE BIT(3) +#define NPCM7XX_SMBCTL1_INTEN BIT(2) +#define NPCM7XX_SMBCTL1_STOP BIT(1) +#define NPCM7XX_SMBCTL1_START BIT(0) + +/* CTL2 fields */ +#define NPCM7XX_SMBCTL2_SCLFRQ(rv) extract8((rv), 1, 6) +#define NPCM7XX_SMBCTL2_ENABLE BIT(0) + +/* CTL3 fields */ +#define NPCM7XX_SMBCTL3_SCL_LVL BIT(7) +#define NPCM7XX_SMBCTL3_SDA_LVL BIT(6) +#define NPCM7XX_SMBCTL3_BNK_SEL BIT(5) +#define NPCM7XX_SMBCTL3_400K_MODE BIT(4) +#define NPCM7XX_SMBCTL3_IDL_START BIT(3) +#define NPCM7XX_SMBCTL3_ARPMEN BIT(2) +#define NPCM7XX_SMBCTL3_SCLFRQ(rv) extract8((rv), 0, 2) + +/* ADDR fields */ +#define NPCM7XX_ADDR_EN BIT(7) +#define NPCM7XX_ADDR_A(rv) extract8((rv), 0, 6) + +#define KEEP_OLD_BIT(o, n, b) (((n) & (~(b))) | ((o) & (b))) +#define WRITE_ONE_CLEAR(o, n, b) ((n) & (b) ? (o) & (~(b)) : (o)) + +#define NPCM7XX_SMBUS_ENABLED(s) ((s)->ctl2 & NPCM7XX_SMBCTL2_ENABLE) + +/* VERSION fields values, read-only. */ +#define NPCM7XX_SMBUS_VERSION_NUMBER 1 +#define NPCM7XX_SMBUS_VERSION_FIFO_SUPPORTED 0 + +/* Reset values */ +#define NPCM7XX_SMB_ST_INIT_VAL 0x00 +#define NPCM7XX_SMB_CST_INIT_VAL 0x10 +#define NPCM7XX_SMB_CST2_INIT_VAL 0x00 +#define NPCM7XX_SMB_CST3_INIT_VAL 0x00 +#define NPCM7XX_SMB_CTL1_INIT_VAL 0x00 +#define NPCM7XX_SMB_CTL2_INIT_VAL 0x00 +#define NPCM7XX_SMB_CTL3_INIT_VAL 0xc0 +#define NPCM7XX_SMB_CTL4_INIT_VAL 0x07 +#define NPCM7XX_SMB_CTL5_INIT_VAL 0x00 +#define NPCM7XX_SMB_ADDR_INIT_VAL 0x00 +#define NPCM7XX_SMB_SCLLT_INIT_VAL 0x00 +#define NPCM7XX_SMB_SCLHT_INIT_VAL 0x00 + +static uint8_t npcm7xx_smbus_get_version(void) +{ + return NPCM7XX_SMBUS_VERSION_FIFO_SUPPORTED << 7 | + NPCM7XX_SMBUS_VERSION_NUMBER; +} + +static void npcm7xx_smbus_update_irq(NPCM7xxSMBusState *s) +{ + int level; + + if (s->ctl1 & NPCM7XX_SMBCTL1_INTEN) { + level = !!((s->ctl1 & NPCM7XX_SMBCTL1_NMINTE && + s->st & NPCM7XX_SMBST_NMATCH) || + (s->st & NPCM7XX_SMBST_BER) || + (s->st & NPCM7XX_SMBST_NEGACK) || + (s->st & NPCM7XX_SMBST_SDAST) || + (s->ctl1 & NPCM7XX_SMBCTL1_STASTRE && + s->st & NPCM7XX_SMBST_SDAST) || + (s->ctl1 & NPCM7XX_SMBCTL1_EOBINTE && + s->cst3 & NPCM7XX_SMBCST3_EO_BUSY)); + + if (level) { + s->cst2 |= NPCM7XX_SMBCST2_INTSTS; + } else { + s->cst2 &= ~NPCM7XX_SMBCST2_INTSTS; + } + qemu_set_irq(s->irq, level); + } +} + +static void npcm7xx_smbus_nack(NPCM7xxSMBusState *s) +{ + s->st &= ~NPCM7XX_SMBST_SDAST; + s->st |= NPCM7XX_SMBST_NEGACK; + s->status = NPCM7XX_SMBUS_STATUS_NEGACK; +} + +static void npcm7xx_smbus_send_byte(NPCM7xxSMBusState *s, uint8_t value) +{ + int rv = i2c_send(s->bus, value); + + if (rv) { + npcm7xx_smbus_nack(s); + } else { + s->st |= NPCM7XX_SMBST_SDAST; + } + trace_npcm7xx_smbus_send_byte((DEVICE(s)->canonical_path), value, !rv); + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_recv_byte(NPCM7xxSMBusState *s) +{ + s->sda = i2c_recv(s->bus); + s->st |= NPCM7XX_SMBST_SDAST; + if (s->st & NPCM7XX_SMBCTL1_ACK) { + trace_npcm7xx_smbus_nack(DEVICE(s)->canonical_path); + i2c_nack(s->bus); + s->st &= NPCM7XX_SMBCTL1_ACK; + } + trace_npcm7xx_smbus_recv_byte((DEVICE(s)->canonical_path), s->sda); + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_start(NPCM7xxSMBusState *s) +{ + /* + * We can start the bus if one of these is true: + * 1. The bus is idle (so we can request it) + * 2. We are the occupier (it's a repeated start condition.) + */ + int available = !i2c_bus_busy(s->bus) || + s->status != NPCM7XX_SMBUS_STATUS_IDLE; + + if (available) { + s->st |= NPCM7XX_SMBST_MODE | NPCM7XX_SMBST_XMIT | NPCM7XX_SMBST_SDAST; + s->cst |= NPCM7XX_SMBCST_BUSY; + } else { + s->st &= ~NPCM7XX_SMBST_MODE; + s->cst &= ~NPCM7XX_SMBCST_BUSY; + s->st |= NPCM7XX_SMBST_BER; + } + + trace_npcm7xx_smbus_start(DEVICE(s)->canonical_path, available); + s->cst |= NPCM7XX_SMBCST_BB; + s->status = NPCM7XX_SMBUS_STATUS_IDLE; + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_send_address(NPCM7xxSMBusState *s, uint8_t value) +{ + int recv; + int rv; + + recv = value & BIT(0); + rv = i2c_start_transfer(s->bus, value >> 1, recv); + trace_npcm7xx_smbus_send_address(DEVICE(s)->canonical_path, + value >> 1, recv, !rv); + if (rv) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: requesting i2c bus for 0x%02x failed: %d\n", + DEVICE(s)->canonical_path, value, rv); + /* Failed to start transfer. NACK to reject.*/ + if (recv) { + s->st &= ~NPCM7XX_SMBST_XMIT; + } else { + s->st |= NPCM7XX_SMBST_XMIT; + } + npcm7xx_smbus_nack(s); + npcm7xx_smbus_update_irq(s); + return; + } + + s->st &= ~NPCM7XX_SMBST_NEGACK; + if (recv) { + s->status = NPCM7XX_SMBUS_STATUS_RECEIVING; + s->st &= ~NPCM7XX_SMBST_XMIT; + } else { + s->status = NPCM7XX_SMBUS_STATUS_SENDING; + s->st |= NPCM7XX_SMBST_XMIT; + } + + if (s->ctl1 & NPCM7XX_SMBCTL1_STASTRE) { + s->st |= NPCM7XX_SMBST_STASTR; + if (!recv) { + s->st |= NPCM7XX_SMBST_SDAST; + } + } else if (recv) { + npcm7xx_smbus_recv_byte(s); + } + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_execute_stop(NPCM7xxSMBusState *s) +{ + i2c_end_transfer(s->bus); + s->st = 0; + s->cst = 0; + s->status = NPCM7XX_SMBUS_STATUS_IDLE; + s->cst3 |= NPCM7XX_SMBCST3_EO_BUSY; + trace_npcm7xx_smbus_stop(DEVICE(s)->canonical_path); + npcm7xx_smbus_update_irq(s); +} + + +static void npcm7xx_smbus_stop(NPCM7xxSMBusState *s) +{ + if (s->st & NPCM7XX_SMBST_MODE) { + switch (s->status) { + case NPCM7XX_SMBUS_STATUS_RECEIVING: + case NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE: + s->status = NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE; + break; + + case NPCM7XX_SMBUS_STATUS_NEGACK: + s->status = NPCM7XX_SMBUS_STATUS_STOPPING_NEGACK; + break; + + default: + npcm7xx_smbus_execute_stop(s); + break; + } + } +} + +static uint8_t npcm7xx_smbus_read_sda(NPCM7xxSMBusState *s) +{ + uint8_t value = s->sda; + + switch (s->status) { + case NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE: + npcm7xx_smbus_execute_stop(s); + break; + + case NPCM7XX_SMBUS_STATUS_RECEIVING: + npcm7xx_smbus_recv_byte(s); + break; + + default: + /* Do nothing */ + break; + } + + return value; +} + +static void npcm7xx_smbus_write_sda(NPCM7xxSMBusState *s, uint8_t value) +{ + s->sda = value; + if (s->st & NPCM7XX_SMBST_MODE) { + switch (s->status) { + case NPCM7XX_SMBUS_STATUS_IDLE: + npcm7xx_smbus_send_address(s, value); + break; + case NPCM7XX_SMBUS_STATUS_SENDING: + npcm7xx_smbus_send_byte(s, value); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to SDA in invalid status %d: %u\n", + DEVICE(s)->canonical_path, s->status, value); + break; + } + } +} + +static void npcm7xx_smbus_write_st(NPCM7xxSMBusState *s, uint8_t value) +{ + s->st = WRITE_ONE_CLEAR(s->st, value, NPCM7XX_SMBST_STP); + s->st = WRITE_ONE_CLEAR(s->st, value, NPCM7XX_SMBST_BER); + s->st = WRITE_ONE_CLEAR(s->st, value, NPCM7XX_SMBST_STASTR); + s->st = WRITE_ONE_CLEAR(s->st, value, NPCM7XX_SMBST_NMATCH); + + if (value & NPCM7XX_SMBST_NEGACK) { + s->st &= ~NPCM7XX_SMBST_NEGACK; + if (s->status == NPCM7XX_SMBUS_STATUS_STOPPING_NEGACK) { + npcm7xx_smbus_execute_stop(s); + } + } + + if (value & NPCM7XX_SMBST_STASTR && + s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) { + npcm7xx_smbus_recv_byte(s); + } + + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_write_cst(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t new_value = s->cst; + + s->cst = WRITE_ONE_CLEAR(new_value, value, NPCM7XX_SMBCST_BB); + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_write_cst3(NPCM7xxSMBusState *s, uint8_t value) +{ + s->cst3 = WRITE_ONE_CLEAR(s->cst3, value, NPCM7XX_SMBCST3_EO_BUSY); + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_write_ctl1(NPCM7xxSMBusState *s, uint8_t value) +{ + s->ctl1 = KEEP_OLD_BIT(s->ctl1, value, + NPCM7XX_SMBCTL1_START | NPCM7XX_SMBCTL1_STOP | NPCM7XX_SMBCTL1_ACK); + + if (value & NPCM7XX_SMBCTL1_START) { + npcm7xx_smbus_start(s); + } + + if (value & NPCM7XX_SMBCTL1_STOP) { + npcm7xx_smbus_stop(s); + } + + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_write_ctl2(NPCM7xxSMBusState *s, uint8_t value) +{ + s->ctl2 = value; + + if (!NPCM7XX_SMBUS_ENABLED(s)) { + /* Disable this SMBus module. */ + s->ctl1 = 0; + s->st = 0; + s->cst3 = s->cst3 & (~NPCM7XX_SMBCST3_EO_BUSY); + s->cst = 0; + } +} + +static void npcm7xx_smbus_write_ctl3(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t old_ctl3 = s->ctl3; + + /* Write to SDA and SCL bits are ignored. */ + s->ctl3 = KEEP_OLD_BIT(old_ctl3, value, + NPCM7XX_SMBCTL3_SCL_LVL | NPCM7XX_SMBCTL3_SDA_LVL); +} + +static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCM7xxSMBusState *s = opaque; + uint64_t value = 0; + uint8_t bank = s->ctl3 & NPCM7XX_SMBCTL3_BNK_SEL; + + /* The order of the registers are their order in memory. */ + switch (offset) { + case NPCM7XX_SMB_SDA: + value = npcm7xx_smbus_read_sda(s); + break; + + case NPCM7XX_SMB_ST: + value = s->st; + break; + + case NPCM7XX_SMB_CST: + value = s->cst; + break; + + case NPCM7XX_SMB_CTL1: + value = s->ctl1; + break; + + case NPCM7XX_SMB_ADDR1: + value = s->addr[0]; + break; + + case NPCM7XX_SMB_CTL2: + value = s->ctl2; + break; + + case NPCM7XX_SMB_ADDR2: + value = s->addr[1]; + break; + + case NPCM7XX_SMB_CTL3: + value = s->ctl3; + break; + + case NPCM7XX_SMB_CST2: + value = s->cst2; + break; + + case NPCM7XX_SMB_CST3: + value = s->cst3; + break; + + case NPCM7XX_SMB_VER: + value = npcm7xx_smbus_get_version(); + break; + + /* This register is either invalid or banked at this point. */ + default: + if (bank) { + /* Bank 1 */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + } else { + /* Bank 0 */ + switch (offset) { + case NPCM7XX_SMB_ADDR3: + value = s->addr[2]; + break; + + case NPCM7XX_SMB_ADDR7: + value = s->addr[6]; + break; + + case NPCM7XX_SMB_ADDR4: + value = s->addr[3]; + break; + + case NPCM7XX_SMB_ADDR8: + value = s->addr[7]; + break; + + case NPCM7XX_SMB_ADDR5: + value = s->addr[4]; + break; + + case NPCM7XX_SMB_ADDR9: + value = s->addr[8]; + break; + + case NPCM7XX_SMB_ADDR6: + value = s->addr[5]; + break; + + case NPCM7XX_SMB_ADDR10: + value = s->addr[9]; + break; + + case NPCM7XX_SMB_CTL4: + value = s->ctl4; + break; + + case NPCM7XX_SMB_CTL5: + value = s->ctl5; + break; + + case NPCM7XX_SMB_SCLLT: + value = s->scllt; + break; + + case NPCM7XX_SMB_SCLHT: + value = s->sclht; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } + } + break; + } + + trace_npcm7xx_smbus_read(DEVICE(s)->canonical_path, offset, value, size); + + return value; +} + +static void npcm7xx_smbus_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + NPCM7xxSMBusState *s = opaque; + uint8_t bank = s->ctl3 & NPCM7XX_SMBCTL3_BNK_SEL; + + trace_npcm7xx_smbus_write(DEVICE(s)->canonical_path, offset, value, size); + + /* The order of the registers are their order in memory. */ + switch (offset) { + case NPCM7XX_SMB_SDA: + npcm7xx_smbus_write_sda(s, value); + break; + + case NPCM7XX_SMB_ST: + npcm7xx_smbus_write_st(s, value); + break; + + case NPCM7XX_SMB_CST: + npcm7xx_smbus_write_cst(s, value); + break; + + case NPCM7XX_SMB_CTL1: + npcm7xx_smbus_write_ctl1(s, value); + break; + + case NPCM7XX_SMB_ADDR1: + s->addr[0] = value; + break; + + case NPCM7XX_SMB_CTL2: + npcm7xx_smbus_write_ctl2(s, value); + break; + + case NPCM7XX_SMB_ADDR2: + s->addr[1] = value; + break; + + case NPCM7XX_SMB_CTL3: + npcm7xx_smbus_write_ctl3(s, value); + break; + + case NPCM7XX_SMB_CST2: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only reg: offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + + case NPCM7XX_SMB_CST3: + npcm7xx_smbus_write_cst3(s, value); + break; + + case NPCM7XX_SMB_VER: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only reg: offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + + /* This register is either invalid or banked at this point. */ + default: + if (bank) { + /* Bank 1 */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + } else { + /* Bank 0 */ + switch (offset) { + case NPCM7XX_SMB_ADDR3: + s->addr[2] = value; + break; + + case NPCM7XX_SMB_ADDR7: + s->addr[6] = value; + break; + + case NPCM7XX_SMB_ADDR4: + s->addr[3] = value; + break; + + case NPCM7XX_SMB_ADDR8: + s->addr[7] = value; + break; + + case NPCM7XX_SMB_ADDR5: + s->addr[4] = value; + break; + + case NPCM7XX_SMB_ADDR9: + s->addr[8] = value; + break; + + case NPCM7XX_SMB_ADDR6: + s->addr[5] = value; + break; + + case NPCM7XX_SMB_ADDR10: + s->addr[9] = value; + break; + + case NPCM7XX_SMB_CTL4: + s->ctl4 = value; + break; + + case NPCM7XX_SMB_CTL5: + s->ctl5 = value; + break; + + case NPCM7XX_SMB_SCLLT: + s->scllt = value; + break; + + case NPCM7XX_SMB_SCLHT: + s->sclht = value; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } + } + break; + } +} + +static const MemoryRegionOps npcm7xx_smbus_ops = { + .read = npcm7xx_smbus_read, + .write = npcm7xx_smbus_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 1, + .unaligned = false, + }, +}; + +static void npcm7xx_smbus_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); + + s->st = NPCM7XX_SMB_ST_INIT_VAL; + s->cst = NPCM7XX_SMB_CST_INIT_VAL; + s->cst2 = NPCM7XX_SMB_CST2_INIT_VAL; + s->cst3 = NPCM7XX_SMB_CST3_INIT_VAL; + s->ctl1 = NPCM7XX_SMB_CTL1_INIT_VAL; + s->ctl2 = NPCM7XX_SMB_CTL2_INIT_VAL; + s->ctl3 = NPCM7XX_SMB_CTL3_INIT_VAL; + s->ctl4 = NPCM7XX_SMB_CTL4_INIT_VAL; + s->ctl5 = NPCM7XX_SMB_CTL5_INIT_VAL; + + for (int i = 0; i < NPCM7XX_SMBUS_NR_ADDRS; ++i) { + s->addr[i] = NPCM7XX_SMB_ADDR_INIT_VAL; + } + s->scllt = NPCM7XX_SMB_SCLLT_INIT_VAL; + s->sclht = NPCM7XX_SMB_SCLHT_INIT_VAL; + + s->status = NPCM7XX_SMBUS_STATUS_IDLE; +} + +static void npcm7xx_smbus_hold_reset(Object *obj) +{ + NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); + + qemu_irq_lower(s->irq); +} + +static void npcm7xx_smbus_init(Object *obj) +{ + NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + sysbus_init_irq(sbd, &s->irq); + memory_region_init_io(&s->iomem, obj, &npcm7xx_smbus_ops, s, + "regs", 4 * KiB); + sysbus_init_mmio(sbd, &s->iomem); + + s->bus = i2c_init_bus(DEVICE(s), "i2c-bus"); + s->status = NPCM7XX_SMBUS_STATUS_IDLE; +} + +static const VMStateDescription vmstate_npcm7xx_smbus = { + .name = "npcm7xx-smbus", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(sda, NPCM7xxSMBusState), + VMSTATE_UINT8(st, NPCM7xxSMBusState), + VMSTATE_UINT8(cst, NPCM7xxSMBusState), + VMSTATE_UINT8(cst2, NPCM7xxSMBusState), + VMSTATE_UINT8(cst3, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl1, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl2, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl3, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl4, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl5, NPCM7xxSMBusState), + VMSTATE_UINT8_ARRAY(addr, NPCM7xxSMBusState, NPCM7XX_SMBUS_NR_ADDRS), + VMSTATE_UINT8(scllt, NPCM7xxSMBusState), + VMSTATE_UINT8(sclht, NPCM7xxSMBusState), + VMSTATE_END_OF_LIST(), + }, +}; + +static void npcm7xx_smbus_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx System Management Bus"; + dc->vmsd = &vmstate_npcm7xx_smbus; + rc->phases.enter = npcm7xx_smbus_enter_reset; + rc->phases.hold = npcm7xx_smbus_hold_reset; +} + +static const TypeInfo npcm7xx_smbus_types[] = { + { + .name = TYPE_NPCM7XX_SMBUS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxSMBusState), + .class_init = npcm7xx_smbus_class_init, + .instance_init = npcm7xx_smbus_init, + }, +}; +DEFINE_TYPES(npcm7xx_smbus_types); diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/meson.build +++ b/hw/i2c/meson.build @@ -XXX,XX +XXX,XX @@ i2c_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_i2c.c')) i2c_ss.add(when: 'CONFIG_IMX_I2C', if_true: files('imx_i2c.c')) i2c_ss.add(when: 'CONFIG_MPC_I2C', if_true: files('mpc_i2c.c')) i2c_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('microbit_i2c.c')) +i2c_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_smbus.c')) i2c_ss.add(when: 'CONFIG_SMBUS_EEPROM', if_true: files('smbus_eeprom.c')) i2c_ss.add(when: 'CONFIG_VERSATILE_I2C', if_true: files('versatile_i2c.c')) i2c_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_i2c.c')) diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_i2c_bus_read(uint32_t busid, uint64_t offset, unsigned size, uint64_t val aspeed_i2c_bus_write(uint32_t busid, uint64_t offset, unsigned size, uint64_t value) "bus[%d]: To 0x%" PRIx64 " of size %u: 0x%" PRIx64 aspeed_i2c_bus_send(const char *mode, int i, int count, uint8_t byte) "%s send %d/%d 0x%02x" aspeed_i2c_bus_recv(const char *mode, int i, int count, uint8_t byte) "%s recv %d/%d 0x%02x" + +# npcm7xx_smbus.c + +npcm7xx_smbus_read(const char *id, uint64_t offset, uint64_t value, unsigned size) "%s offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" +npcm7xx_smbus_write(const char *id, uint64_t offset, uint64_t value, unsigned size) "%s offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" +npcm7xx_smbus_start(const char *id, int success) "%s starting, success: %d" +npcm7xx_smbus_send_address(const char *id, uint8_t addr, int recv, int success) "%s sending address: 0x%02x, recv: %d, success: %d" +npcm7xx_smbus_send_byte(const char *id, uint8_t value, int success) "%s send byte: 0x%02x, success: %d" +npcm7xx_smbus_recv_byte(const char *id, uint8_t value) "%s recv byte: 0x%02x" +npcm7xx_smbus_stop(const char *id) "%s stopping" +npcm7xx_smbus_nack(const char *id) "%s nacking" -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Add I2C temperature sensors for NPCM750 eval board. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210210220426.3577804-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/npcm7xx_boards.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ static NPCM7xxState *npcm7xx_create_soc(MachineState *machine, return NPCM7XX(obj); } +static I2CBus *npcm7xx_i2c_get_bus(NPCM7xxState *soc, uint32_t num) +{ + g_assert(num < ARRAY_SIZE(soc->smbus)); + return I2C_BUS(qdev_get_child_bus(DEVICE(&soc->smbus[num]), "i2c-bus")); +} + +static void npcm750_evb_i2c_init(NPCM7xxState *soc) +{ + /* lm75 temperature sensor on SVB, tmp105 is compatible */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 0), "tmp105", 0x48); + /* lm75 temperature sensor on EB, tmp105 is compatible */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 1), "tmp105", 0x48); + /* tmp100 temperature sensor on EB, tmp105 is compatible */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 2), "tmp105", 0x48); + /* tmp100 temperature sensor on SVB, tmp105 is compatible */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 6), "tmp105", 0x48); +} + static void npcm750_evb_init(MachineState *machine) { NPCM7xxState *soc; @@ -XXX,XX +XXX,XX @@ static void npcm750_evb_init(MachineState *machine) npcm7xx_load_bootrom(machine, soc); npcm7xx_connect_flash(&soc->fiu[0], 0, "w25q256", drive_get(IF_MTD, 0, 0)); + npcm750_evb_i2c_init(soc); npcm7xx_load_kernel(machine, soc); } -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Add AT24 EEPROM and temperature sensors for GSJ machine. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210210220426.3577804-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/npcm7xx_boards.c | 27 +++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + 2 files changed, 28 insertions(+) diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "hw/arm/npcm7xx.h" #include "hw/core/cpu.h" +#include "hw/i2c/smbus_eeprom.h" #include "hw/loader.h" #include "hw/qdev-properties.h" #include "qapi/error.h" @@ -XXX,XX +XXX,XX @@ static I2CBus *npcm7xx_i2c_get_bus(NPCM7xxState *soc, uint32_t num) return I2C_BUS(qdev_get_child_bus(DEVICE(&soc->smbus[num]), "i2c-bus")); } +static void at24c_eeprom_init(NPCM7xxState *soc, int bus, uint8_t addr, + uint32_t rsize) +{ + I2CBus *i2c_bus = npcm7xx_i2c_get_bus(soc, bus); + I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr); + DeviceState *dev = DEVICE(i2c_dev); + + qdev_prop_set_uint32(dev, "rom-size", rsize); + i2c_slave_realize_and_unref(i2c_dev, i2c_bus, &error_abort); +} + static void npcm750_evb_i2c_init(NPCM7xxState *soc) { /* lm75 temperature sensor on SVB, tmp105 is compatible */ @@ -XXX,XX +XXX,XX @@ static void npcm750_evb_i2c_init(NPCM7xxState *soc) i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 6), "tmp105", 0x48); } +static void quanta_gsj_i2c_init(NPCM7xxState *soc) +{ + /* GSJ machine have 4 max31725 temperature sensors, tmp105 is compatible. */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 1), "tmp105", 0x5c); + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 2), "tmp105", 0x5c); + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 3), "tmp105", 0x5c); + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 4), "tmp105", 0x5c); + + at24c_eeprom_init(soc, 9, 0x55, 8192); + at24c_eeprom_init(soc, 10, 0x55, 8192); + + /* TODO: Add additional i2c devices. */ +} + static void npcm750_evb_init(MachineState *machine) { NPCM7xxState *soc; @@ -XXX,XX +XXX,XX @@ static void quanta_gsj_init(MachineState *machine) npcm7xx_load_bootrom(machine, soc); npcm7xx_connect_flash(&soc->fiu[0], 0, "mx25l25635e", drive_get(IF_MTD, 0, 0)); + quanta_gsj_i2c_init(soc); npcm7xx_load_kernel(machine, soc); } diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config NPCM7XX bool select A9MPCORE select ARM_GIC + select AT24C # EEPROM select PL310 # cache controller select SERIAL select SSI -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> This patch adds a QTest for NPCM7XX SMBus's single byte mode. It sends a byte to a device in the evaluation board, and verify the retrieved value is equivalent to the sent value. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210210220426.3577804-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_smbus-test.c | 352 +++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 353 insertions(+) create mode 100644 tests/qtest/npcm7xx_smbus-test.c diff --git a/tests/qtest/npcm7xx_smbus-test.c b/tests/qtest/npcm7xx_smbus-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_smbus-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx SMBus Modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/bitops.h" +#include "libqos/i2c.h" +#include "libqos/libqtest.h" +#include "hw/misc/tmp105_regs.h" + +#define NR_SMBUS_DEVICES 16 +#define SMBUS_ADDR(x) (0xf0080000 + 0x1000 * (x)) +#define SMBUS_IRQ(x) (64 + (x)) + +#define EVB_DEVICE_ADDR 0x48 +#define INVALID_DEVICE_ADDR 0x01 + +const int evb_bus_list[] = {0, 1, 2, 6}; + +/* Offsets */ +enum CommonRegister { + OFFSET_SDA = 0x0, + OFFSET_ST = 0x2, + OFFSET_CST = 0x4, + OFFSET_CTL1 = 0x6, + OFFSET_ADDR1 = 0x8, + OFFSET_CTL2 = 0xa, + OFFSET_ADDR2 = 0xc, + OFFSET_CTL3 = 0xe, + OFFSET_CST2 = 0x18, + OFFSET_CST3 = 0x19, +}; + +enum NPCM7xxSMBusBank0Register { + OFFSET_ADDR3 = 0x10, + OFFSET_ADDR7 = 0x11, + OFFSET_ADDR4 = 0x12, + OFFSET_ADDR8 = 0x13, + OFFSET_ADDR5 = 0x14, + OFFSET_ADDR9 = 0x15, + OFFSET_ADDR6 = 0x16, + OFFSET_ADDR10 = 0x17, + OFFSET_CTL4 = 0x1a, + OFFSET_CTL5 = 0x1b, + OFFSET_SCLLT = 0x1c, + OFFSET_FIF_CTL = 0x1d, + OFFSET_SCLHT = 0x1e, +}; + +enum NPCM7xxSMBusBank1Register { + OFFSET_FIF_CTS = 0x10, + OFFSET_FAIR_PER = 0x11, + OFFSET_TXF_CTL = 0x12, + OFFSET_T_OUT = 0x14, + OFFSET_TXF_STS = 0x1a, + OFFSET_RXF_STS = 0x1c, + OFFSET_RXF_CTL = 0x1e, +}; + +/* ST fields */ +#define ST_STP BIT(7) +#define ST_SDAST BIT(6) +#define ST_BER BIT(5) +#define ST_NEGACK BIT(4) +#define ST_STASTR BIT(3) +#define ST_NMATCH BIT(2) +#define ST_MODE BIT(1) +#define ST_XMIT BIT(0) + +/* CST fields */ +#define CST_ARPMATCH BIT(7) +#define CST_MATCHAF BIT(6) +#define CST_TGSCL BIT(5) +#define CST_TSDA BIT(4) +#define CST_GCMATCH BIT(3) +#define CST_MATCH BIT(2) +#define CST_BB BIT(1) +#define CST_BUSY BIT(0) + +/* CST2 fields */ +#define CST2_INSTTS BIT(7) +#define CST2_MATCH7F BIT(6) +#define CST2_MATCH6F BIT(5) +#define CST2_MATCH5F BIT(4) +#define CST2_MATCH4F BIT(3) +#define CST2_MATCH3F BIT(2) +#define CST2_MATCH2F BIT(1) +#define CST2_MATCH1F BIT(0) + +/* CST3 fields */ +#define CST3_EO_BUSY BIT(7) +#define CST3_MATCH10F BIT(2) +#define CST3_MATCH9F BIT(1) +#define CST3_MATCH8F BIT(0) + +/* CTL1 fields */ +#define CTL1_STASTRE BIT(7) +#define CTL1_NMINTE BIT(6) +#define CTL1_GCMEN BIT(5) +#define CTL1_ACK BIT(4) +#define CTL1_EOBINTE BIT(3) +#define CTL1_INTEN BIT(2) +#define CTL1_STOP BIT(1) +#define CTL1_START BIT(0) + +/* CTL2 fields */ +#define CTL2_SCLFRQ(rv) extract8((rv), 1, 6) +#define CTL2_ENABLE BIT(0) + +/* CTL3 fields */ +#define CTL3_SCL_LVL BIT(7) +#define CTL3_SDA_LVL BIT(6) +#define CTL3_BNK_SEL BIT(5) +#define CTL3_400K_MODE BIT(4) +#define CTL3_IDL_START BIT(3) +#define CTL3_ARPMEN BIT(2) +#define CTL3_SCLFRQ(rv) extract8((rv), 0, 2) + +/* ADDR fields */ +#define ADDR_EN BIT(7) +#define ADDR_A(rv) extract8((rv), 0, 6) + + +static void check_running(QTestState *qts, uint64_t base_addr) +{ + g_assert_true(qtest_readb(qts, base_addr + OFFSET_CST) & CST_BUSY); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_CST) & CST_BB); +} + +static void check_stopped(QTestState *qts, uint64_t base_addr) +{ + uint8_t cst3; + + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, 0); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_CST) & CST_BUSY); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_CST) & CST_BB); + + cst3 = qtest_readb(qts, base_addr + OFFSET_CST3); + g_assert_true(cst3 & CST3_EO_BUSY); + qtest_writeb(qts, base_addr + OFFSET_CST3, cst3); + cst3 = qtest_readb(qts, base_addr + OFFSET_CST3); + g_assert_false(cst3 & CST3_EO_BUSY); +} + +static void enable_bus(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl2 = qtest_readb(qts, base_addr + OFFSET_CTL2); + + ctl2 |= CTL2_ENABLE; + qtest_writeb(qts, base_addr + OFFSET_CTL2, ctl2); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_CTL2) & CTL2_ENABLE); +} + +static void disable_bus(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl2 = qtest_readb(qts, base_addr + OFFSET_CTL2); + + ctl2 &= ~CTL2_ENABLE; + qtest_writeb(qts, base_addr + OFFSET_CTL2, ctl2); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_CTL2) & CTL2_ENABLE); +} + +static void start_transfer(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl1; + + ctl1 = CTL1_START | CTL1_INTEN | CTL1_STASTRE; + qtest_writeb(qts, base_addr + OFFSET_CTL1, ctl1); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_CTL1), ==, + CTL1_INTEN | CTL1_STASTRE | CTL1_INTEN); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, + ST_MODE | ST_XMIT | ST_SDAST); + check_running(qts, base_addr); +} + +static void stop_transfer(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl1 = qtest_readb(qts, base_addr + OFFSET_CTL1); + + ctl1 &= ~(CTL1_START | CTL1_ACK); + ctl1 |= CTL1_STOP | CTL1_INTEN | CTL1_EOBINTE; + qtest_writeb(qts, base_addr + OFFSET_CTL1, ctl1); + ctl1 = qtest_readb(qts, base_addr + OFFSET_CTL1); + g_assert_false(ctl1 & CTL1_STOP); +} + +static void send_byte(QTestState *qts, uint64_t base_addr, uint8_t byte) +{ + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, + ST_MODE | ST_XMIT | ST_SDAST); + qtest_writeb(qts, base_addr + OFFSET_SDA, byte); +} + +static uint8_t recv_byte(QTestState *qts, uint64_t base_addr) +{ + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, + ST_MODE | ST_SDAST); + return qtest_readb(qts, base_addr + OFFSET_SDA); +} + +static void send_address(QTestState *qts, uint64_t base_addr, uint8_t addr, + bool recv, bool valid) +{ + uint8_t encoded_addr = (addr << 1) | (recv ? 1 : 0); + uint8_t st; + + qtest_writeb(qts, base_addr + OFFSET_SDA, encoded_addr); + st = qtest_readb(qts, base_addr + OFFSET_ST); + + if (valid) { + if (recv) { + g_assert_cmphex(st, ==, ST_MODE | ST_SDAST | ST_STASTR); + } else { + g_assert_cmphex(st, ==, ST_MODE | ST_XMIT | ST_SDAST | ST_STASTR); + } + + qtest_writeb(qts, base_addr + OFFSET_ST, ST_STASTR); + st = qtest_readb(qts, base_addr + OFFSET_ST); + if (recv) { + g_assert_cmphex(st, ==, ST_MODE | ST_SDAST); + } else { + g_assert_cmphex(st, ==, ST_MODE | ST_XMIT | ST_SDAST); + } + } else { + if (recv) { + g_assert_cmphex(st, ==, ST_MODE | ST_NEGACK); + } else { + g_assert_cmphex(st, ==, ST_MODE | ST_XMIT | ST_NEGACK); + } + } +} + +static void send_nack(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl1 = qtest_readb(qts, base_addr + OFFSET_CTL1); + + ctl1 &= ~(CTL1_START | CTL1_STOP); + ctl1 |= CTL1_ACK | CTL1_INTEN; + qtest_writeb(qts, base_addr + OFFSET_CTL1, ctl1); +} + +/* Check the SMBus's status is set correctly when disabled. */ +static void test_disable_bus(gconstpointer data) +{ + intptr_t index = (intptr_t)data; + uint64_t base_addr = SMBUS_ADDR(index); + QTestState *qts = qtest_init("-machine npcm750-evb"); + + disable_bus(qts, base_addr); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_CTL1), ==, 0); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, 0); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_CST3) & CST3_EO_BUSY); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_CST), ==, 0); + qtest_quit(qts); +} + +/* Check the SMBus returns a NACK for an invalid address. */ +static void test_invalid_addr(gconstpointer data) +{ + intptr_t index = (intptr_t)data; + uint64_t base_addr = SMBUS_ADDR(index); + int irq = SMBUS_IRQ(index); + QTestState *qts = qtest_init("-machine npcm750-evb"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + enable_bus(qts, base_addr); + g_assert_false(qtest_get_irq(qts, irq)); + start_transfer(qts, base_addr); + send_address(qts, base_addr, INVALID_DEVICE_ADDR, false, false); + g_assert_true(qtest_get_irq(qts, irq)); + stop_transfer(qts, base_addr); + check_running(qts, base_addr); + qtest_writeb(qts, base_addr + OFFSET_ST, ST_NEGACK); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_ST) & ST_NEGACK); + check_stopped(qts, base_addr); + qtest_quit(qts); +} + +/* Check the SMBus can send and receive bytes to a device in single mode. */ +static void test_single_mode(gconstpointer data) +{ + intptr_t index = (intptr_t)data; + uint64_t base_addr = SMBUS_ADDR(index); + int irq = SMBUS_IRQ(index); + uint8_t value = 0x60; + QTestState *qts = qtest_init("-machine npcm750-evb"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + enable_bus(qts, base_addr); + + /* Sending */ + g_assert_false(qtest_get_irq(qts, irq)); + start_transfer(qts, base_addr); + g_assert_true(qtest_get_irq(qts, irq)); + send_address(qts, base_addr, EVB_DEVICE_ADDR, false, true); + send_byte(qts, base_addr, TMP105_REG_CONFIG); + send_byte(qts, base_addr, value); + stop_transfer(qts, base_addr); + check_stopped(qts, base_addr); + + /* Receiving */ + start_transfer(qts, base_addr); + send_address(qts, base_addr, EVB_DEVICE_ADDR, false, true); + send_byte(qts, base_addr, TMP105_REG_CONFIG); + start_transfer(qts, base_addr); + send_address(qts, base_addr, EVB_DEVICE_ADDR, true, true); + send_nack(qts, base_addr); + stop_transfer(qts, base_addr); + check_running(qts, base_addr); + g_assert_cmphex(recv_byte(qts, base_addr), ==, value); + check_stopped(qts, base_addr); + qtest_quit(qts); +} + +static void smbus_add_test(const char *name, int index, GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf( + "npcm7xx_smbus[%d]/%s", index, name); + qtest_add_data_func(full_name, (void *)(intptr_t)index, fn); +} +#define add_test(name, td) smbus_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + int i; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + for (i = 0; i < NR_SMBUS_DEVICES; ++i) { + add_test(disable_bus, i); + add_test(invalid_addr, i); + } + + for (i = 0; i < ARRAY_SIZE(evb_bus_list); ++i) { + add_test(single_mode, evb_bus_list[i]); + } + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_gpio-test', 'npcm7xx_pwm-test', 'npcm7xx_rng-test', + 'npcm7xx_smbus-test', 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> This patch implements the FIFO mode of the SMBus module. In FIFO, the user transmits or receives at most 16 bytes at a time. The FIFO mode allows the module to transmit large amount of data faster than single byte mode. Since we only added the device in a patch that is only a few commits away in the same patch set. We do not increase the VMstate version number in this special case. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-6-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/npcm7xx_smbus.h | 25 +++ hw/i2c/npcm7xx_smbus.c | 342 +++++++++++++++++++++++++++++-- tests/qtest/npcm7xx_smbus-test.c | 149 +++++++++++++- hw/i2c/trace-events | 1 + 4 files changed, 501 insertions(+), 16 deletions(-) diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/npcm7xx_smbus.h +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_SMBUS_NR_ADDRS 10 +/* Size of the FIFO buffer. */ +#define NPCM7XX_SMBUS_FIFO_SIZE 16 + typedef enum NPCM7xxSMBusStatus { NPCM7XX_SMBUS_STATUS_IDLE, NPCM7XX_SMBUS_STATUS_SENDING, @@ -XXX,XX +XXX,XX @@ typedef enum NPCM7xxSMBusStatus { * @addr: The SMBus module's own addresses on the I2C bus. * @scllt: The SCL low time register. * @sclht: The SCL high time register. + * @fif_ctl: The FIFO control register. + * @fif_cts: The FIFO control status register. + * @fair_per: The fair preriod register. + * @txf_ctl: The transmit FIFO control register. + * @t_out: The SMBus timeout register. + * @txf_sts: The transmit FIFO status register. + * @rxf_sts: The receive FIFO status register. + * @rxf_ctl: The receive FIFO control register. + * @rx_fifo: The FIFO buffer for receiving in FIFO mode. + * @rx_cur: The current position of rx_fifo. * @status: The current status of the SMBus. */ typedef struct NPCM7xxSMBusState { @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSMBusState { uint8_t scllt; uint8_t sclht; + uint8_t fif_ctl; + uint8_t fif_cts; + uint8_t fair_per; + uint8_t txf_ctl; + uint8_t t_out; + uint8_t txf_sts; + uint8_t rxf_sts; + uint8_t rxf_ctl; + + uint8_t rx_fifo[NPCM7XX_SMBUS_FIFO_SIZE]; + uint8_t rx_cur; + NPCM7xxSMBusStatus status; } NPCM7xxSMBusState; diff --git a/hw/i2c/npcm7xx_smbus.c b/hw/i2c/npcm7xx_smbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/npcm7xx_smbus.c +++ b/hw/i2c/npcm7xx_smbus.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxSMBusBank1Register { #define NPCM7XX_ADDR_EN BIT(7) #define NPCM7XX_ADDR_A(rv) extract8((rv), 0, 6) +/* FIFO Mode Register Fields */ +/* FIF_CTL fields */ +#define NPCM7XX_SMBFIF_CTL_FIFO_EN BIT(4) +#define NPCM7XX_SMBFIF_CTL_FAIR_RDY_IE BIT(2) +#define NPCM7XX_SMBFIF_CTL_FAIR_RDY BIT(1) +#define NPCM7XX_SMBFIF_CTL_FAIR_BUSY BIT(0) +/* FIF_CTS fields */ +#define NPCM7XX_SMBFIF_CTS_STR BIT(7) +#define NPCM7XX_SMBFIF_CTS_CLR_FIFO BIT(6) +#define NPCM7XX_SMBFIF_CTS_RFTE_IE BIT(3) +#define NPCM7XX_SMBFIF_CTS_RXF_TXE BIT(1) +/* TXF_CTL fields */ +#define NPCM7XX_SMBTXF_CTL_THR_TXIE BIT(6) +#define NPCM7XX_SMBTXF_CTL_TX_THR(rv) extract8((rv), 0, 5) +/* T_OUT fields */ +#define NPCM7XX_SMBT_OUT_ST BIT(7) +#define NPCM7XX_SMBT_OUT_IE BIT(6) +#define NPCM7XX_SMBT_OUT_CLKDIV(rv) extract8((rv), 0, 6) +/* TXF_STS fields */ +#define NPCM7XX_SMBTXF_STS_TX_THST BIT(6) +#define NPCM7XX_SMBTXF_STS_TX_BYTES(rv) extract8((rv), 0, 5) +/* RXF_STS fields */ +#define NPCM7XX_SMBRXF_STS_RX_THST BIT(6) +#define NPCM7XX_SMBRXF_STS_RX_BYTES(rv) extract8((rv), 0, 5) +/* RXF_CTL fields */ +#define NPCM7XX_SMBRXF_CTL_THR_RXIE BIT(6) +#define NPCM7XX_SMBRXF_CTL_LAST BIT(5) +#define NPCM7XX_SMBRXF_CTL_RX_THR(rv) extract8((rv), 0, 5) + #define KEEP_OLD_BIT(o, n, b) (((n) & (~(b))) | ((o) & (b))) #define WRITE_ONE_CLEAR(o, n, b) ((n) & (b) ? (o) & (~(b)) : (o)) #define NPCM7XX_SMBUS_ENABLED(s) ((s)->ctl2 & NPCM7XX_SMBCTL2_ENABLE) +#define NPCM7XX_SMBUS_FIFO_ENABLED(s) ((s)->fif_ctl & \ + NPCM7XX_SMBFIF_CTL_FIFO_EN) /* VERSION fields values, read-only. */ #define NPCM7XX_SMBUS_VERSION_NUMBER 1 -#define NPCM7XX_SMBUS_VERSION_FIFO_SUPPORTED 0 +#define NPCM7XX_SMBUS_VERSION_FIFO_SUPPORTED 1 /* Reset values */ #define NPCM7XX_SMB_ST_INIT_VAL 0x00 @@ -XXX,XX +XXX,XX @@ enum NPCM7xxSMBusBank1Register { #define NPCM7XX_SMB_ADDR_INIT_VAL 0x00 #define NPCM7XX_SMB_SCLLT_INIT_VAL 0x00 #define NPCM7XX_SMB_SCLHT_INIT_VAL 0x00 +#define NPCM7XX_SMB_FIF_CTL_INIT_VAL 0x00 +#define NPCM7XX_SMB_FIF_CTS_INIT_VAL 0x00 +#define NPCM7XX_SMB_FAIR_PER_INIT_VAL 0x00 +#define NPCM7XX_SMB_TXF_CTL_INIT_VAL 0x00 +#define NPCM7XX_SMB_T_OUT_INIT_VAL 0x3f +#define NPCM7XX_SMB_TXF_STS_INIT_VAL 0x00 +#define NPCM7XX_SMB_RXF_STS_INIT_VAL 0x00 +#define NPCM7XX_SMB_RXF_CTL_INIT_VAL 0x01 static uint8_t npcm7xx_smbus_get_version(void) { @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_update_irq(NPCM7xxSMBusState *s) (s->ctl1 & NPCM7XX_SMBCTL1_STASTRE && s->st & NPCM7XX_SMBST_SDAST) || (s->ctl1 & NPCM7XX_SMBCTL1_EOBINTE && - s->cst3 & NPCM7XX_SMBCST3_EO_BUSY)); + s->cst3 & NPCM7XX_SMBCST3_EO_BUSY) || + (s->rxf_ctl & NPCM7XX_SMBRXF_CTL_THR_RXIE && + s->rxf_sts & NPCM7XX_SMBRXF_STS_RX_THST) || + (s->txf_ctl & NPCM7XX_SMBTXF_CTL_THR_TXIE && + s->txf_sts & NPCM7XX_SMBTXF_STS_TX_THST) || + (s->fif_cts & NPCM7XX_SMBFIF_CTS_RFTE_IE && + s->fif_cts & NPCM7XX_SMBFIF_CTS_RXF_TXE)); if (level) { s->cst2 |= NPCM7XX_SMBCST2_INTSTS; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_nack(NPCM7xxSMBusState *s) s->status = NPCM7XX_SMBUS_STATUS_NEGACK; } +static void npcm7xx_smbus_clear_buffer(NPCM7xxSMBusState *s) +{ + s->fif_cts &= ~NPCM7XX_SMBFIF_CTS_RXF_TXE; + s->txf_sts = 0; + s->rxf_sts = 0; +} + static void npcm7xx_smbus_send_byte(NPCM7xxSMBusState *s, uint8_t value) { int rv = i2c_send(s->bus, value); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_send_byte(NPCM7xxSMBusState *s, uint8_t value) npcm7xx_smbus_nack(s); } else { s->st |= NPCM7XX_SMBST_SDAST; + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + s->fif_cts |= NPCM7XX_SMBFIF_CTS_RXF_TXE; + if (NPCM7XX_SMBTXF_STS_TX_BYTES(s->txf_sts) == + NPCM7XX_SMBTXF_CTL_TX_THR(s->txf_ctl)) { + s->txf_sts = NPCM7XX_SMBTXF_STS_TX_THST; + } else { + s->txf_sts = 0; + } + } } trace_npcm7xx_smbus_send_byte((DEVICE(s)->canonical_path), value, !rv); npcm7xx_smbus_update_irq(s); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_recv_byte(NPCM7xxSMBusState *s) npcm7xx_smbus_update_irq(s); } +static void npcm7xx_smbus_recv_fifo(NPCM7xxSMBusState *s) +{ + uint8_t expected_bytes = NPCM7XX_SMBRXF_CTL_RX_THR(s->rxf_ctl); + uint8_t received_bytes = NPCM7XX_SMBRXF_STS_RX_BYTES(s->rxf_sts); + uint8_t pos; + + if (received_bytes == expected_bytes) { + return; + } + + while (received_bytes < expected_bytes && + received_bytes < NPCM7XX_SMBUS_FIFO_SIZE) { + pos = (s->rx_cur + received_bytes) % NPCM7XX_SMBUS_FIFO_SIZE; + s->rx_fifo[pos] = i2c_recv(s->bus); + trace_npcm7xx_smbus_recv_byte((DEVICE(s)->canonical_path), + s->rx_fifo[pos]); + ++received_bytes; + } + + trace_npcm7xx_smbus_recv_fifo((DEVICE(s)->canonical_path), + received_bytes, expected_bytes); + s->rxf_sts = received_bytes; + if (unlikely(received_bytes < expected_bytes)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid rx_thr value: 0x%02x\n", + DEVICE(s)->canonical_path, expected_bytes); + return; + } + + s->rxf_sts |= NPCM7XX_SMBRXF_STS_RX_THST; + if (s->rxf_ctl & NPCM7XX_SMBRXF_CTL_LAST) { + trace_npcm7xx_smbus_nack(DEVICE(s)->canonical_path); + i2c_nack(s->bus); + s->rxf_ctl &= ~NPCM7XX_SMBRXF_CTL_LAST; + } + if (received_bytes == NPCM7XX_SMBUS_FIFO_SIZE) { + s->st |= NPCM7XX_SMBST_SDAST; + s->fif_cts |= NPCM7XX_SMBFIF_CTS_RXF_TXE; + } else if (!(s->rxf_ctl & NPCM7XX_SMBRXF_CTL_THR_RXIE)) { + s->st |= NPCM7XX_SMBST_SDAST; + } else { + s->st &= ~NPCM7XX_SMBST_SDAST; + } + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_read_byte_fifo(NPCM7xxSMBusState *s) +{ + uint8_t received_bytes = NPCM7XX_SMBRXF_STS_RX_BYTES(s->rxf_sts); + + if (received_bytes == 0) { + npcm7xx_smbus_recv_fifo(s); + return; + } + + s->sda = s->rx_fifo[s->rx_cur]; + s->rx_cur = (s->rx_cur + 1u) % NPCM7XX_SMBUS_FIFO_SIZE; + --s->rxf_sts; + npcm7xx_smbus_update_irq(s); +} + static void npcm7xx_smbus_start(NPCM7xxSMBusState *s) { /* @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_start(NPCM7xxSMBusState *s) if (available) { s->st |= NPCM7XX_SMBST_MODE | NPCM7XX_SMBST_XMIT | NPCM7XX_SMBST_SDAST; s->cst |= NPCM7XX_SMBCST_BUSY; + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + s->fif_cts |= NPCM7XX_SMBFIF_CTS_RXF_TXE; + } } else { s->st &= ~NPCM7XX_SMBST_MODE; s->cst &= ~NPCM7XX_SMBCST_BUSY; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_send_address(NPCM7xxSMBusState *s, uint8_t value) s->st |= NPCM7XX_SMBST_SDAST; } } else if (recv) { - npcm7xx_smbus_recv_byte(s); + s->st |= NPCM7XX_SMBST_SDAST; + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + npcm7xx_smbus_recv_fifo(s); + } else { + npcm7xx_smbus_recv_byte(s); + } + } else if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + s->st |= NPCM7XX_SMBST_SDAST; + s->fif_cts |= NPCM7XX_SMBFIF_CTS_RXF_TXE; } npcm7xx_smbus_update_irq(s); } @@ -XXX,XX +XXX,XX @@ static uint8_t npcm7xx_smbus_read_sda(NPCM7xxSMBusState *s) switch (s->status) { case NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE: - npcm7xx_smbus_execute_stop(s); + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + if (NPCM7XX_SMBRXF_STS_RX_BYTES(s->rxf_sts) <= 1) { + npcm7xx_smbus_execute_stop(s); + } + if (NPCM7XX_SMBRXF_STS_RX_BYTES(s->rxf_sts) == 0) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read to SDA with an empty rx-fifo buffer, " + "result undefined: %u\n", + DEVICE(s)->canonical_path, s->sda); + break; + } + npcm7xx_smbus_read_byte_fifo(s); + value = s->sda; + } else { + npcm7xx_smbus_execute_stop(s); + } break; case NPCM7XX_SMBUS_STATUS_RECEIVING: - npcm7xx_smbus_recv_byte(s); + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + npcm7xx_smbus_read_byte_fifo(s); + value = s->sda; + } else { + npcm7xx_smbus_recv_byte(s); + } break; default: @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write_st(NPCM7xxSMBusState *s, uint8_t value) } if (value & NPCM7XX_SMBST_STASTR && - s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) { - npcm7xx_smbus_recv_byte(s); + s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) { + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + npcm7xx_smbus_recv_fifo(s); + } else { + npcm7xx_smbus_recv_byte(s); + } } npcm7xx_smbus_update_irq(s); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write_ctl2(NPCM7xxSMBusState *s, uint8_t value) s->st = 0; s->cst3 = s->cst3 & (~NPCM7XX_SMBCST3_EO_BUSY); s->cst = 0; + npcm7xx_smbus_clear_buffer(s); } } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write_ctl3(NPCM7xxSMBusState *s, uint8_t value) NPCM7XX_SMBCTL3_SCL_LVL | NPCM7XX_SMBCTL3_SDA_LVL); } +static void npcm7xx_smbus_write_fif_ctl(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t new_ctl = value; + + new_ctl = KEEP_OLD_BIT(s->fif_ctl, new_ctl, NPCM7XX_SMBFIF_CTL_FAIR_RDY); + new_ctl = WRITE_ONE_CLEAR(new_ctl, value, NPCM7XX_SMBFIF_CTL_FAIR_RDY); + new_ctl = KEEP_OLD_BIT(s->fif_ctl, new_ctl, NPCM7XX_SMBFIF_CTL_FAIR_BUSY); + s->fif_ctl = new_ctl; +} + +static void npcm7xx_smbus_write_fif_cts(NPCM7xxSMBusState *s, uint8_t value) +{ + s->fif_cts = WRITE_ONE_CLEAR(s->fif_cts, value, NPCM7XX_SMBFIF_CTS_STR); + s->fif_cts = WRITE_ONE_CLEAR(s->fif_cts, value, NPCM7XX_SMBFIF_CTS_RXF_TXE); + s->fif_cts = KEEP_OLD_BIT(value, s->fif_cts, NPCM7XX_SMBFIF_CTS_RFTE_IE); + + if (value & NPCM7XX_SMBFIF_CTS_CLR_FIFO) { + npcm7xx_smbus_clear_buffer(s); + } +} + +static void npcm7xx_smbus_write_txf_ctl(NPCM7xxSMBusState *s, uint8_t value) +{ + s->txf_ctl = value; +} + +static void npcm7xx_smbus_write_t_out(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t new_t_out = value; + + if ((value & NPCM7XX_SMBT_OUT_ST) || (!(s->t_out & NPCM7XX_SMBT_OUT_ST))) { + new_t_out &= ~NPCM7XX_SMBT_OUT_ST; + } else { + new_t_out |= NPCM7XX_SMBT_OUT_ST; + } + + s->t_out = new_t_out; +} + +static void npcm7xx_smbus_write_txf_sts(NPCM7xxSMBusState *s, uint8_t value) +{ + s->txf_sts = WRITE_ONE_CLEAR(s->txf_sts, value, NPCM7XX_SMBTXF_STS_TX_THST); +} + +static void npcm7xx_smbus_write_rxf_sts(NPCM7xxSMBusState *s, uint8_t value) +{ + if (value & NPCM7XX_SMBRXF_STS_RX_THST) { + s->rxf_sts &= ~NPCM7XX_SMBRXF_STS_RX_THST; + if (s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) { + npcm7xx_smbus_recv_fifo(s); + } + } +} + +static void npcm7xx_smbus_write_rxf_ctl(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t new_ctl = value; + + if (!(value & NPCM7XX_SMBRXF_CTL_LAST)) { + new_ctl = KEEP_OLD_BIT(s->rxf_ctl, new_ctl, NPCM7XX_SMBRXF_CTL_LAST); + } + s->rxf_ctl = new_ctl; +} + static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size) { NPCM7xxSMBusState *s = opaque; @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size) default: if (bank) { /* Bank 1 */ - qemu_log_mask(LOG_GUEST_ERROR, - "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", - DEVICE(s)->canonical_path, offset); + switch (offset) { + case NPCM7XX_SMB_FIF_CTS: + value = s->fif_cts; + break; + + case NPCM7XX_SMB_FAIR_PER: + value = s->fair_per; + break; + + case NPCM7XX_SMB_TXF_CTL: + value = s->txf_ctl; + break; + + case NPCM7XX_SMB_T_OUT: + value = s->t_out; + break; + + case NPCM7XX_SMB_TXF_STS: + value = s->txf_sts; + break; + + case NPCM7XX_SMB_RXF_STS: + value = s->rxf_sts; + break; + + case NPCM7XX_SMB_RXF_CTL: + value = s->rxf_ctl; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } } else { /* Bank 0 */ switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size) value = s->scllt; break; + case NPCM7XX_SMB_FIF_CTL: + value = s->fif_ctl; + break; + case NPCM7XX_SMB_SCLHT: value = s->sclht; break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write(void *opaque, hwaddr offset, uint64_t value, default: if (bank) { /* Bank 1 */ - qemu_log_mask(LOG_GUEST_ERROR, - "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", - DEVICE(s)->canonical_path, offset); + switch (offset) { + case NPCM7XX_SMB_FIF_CTS: + npcm7xx_smbus_write_fif_cts(s, value); + break; + + case NPCM7XX_SMB_FAIR_PER: + s->fair_per = value; + break; + + case NPCM7XX_SMB_TXF_CTL: + npcm7xx_smbus_write_txf_ctl(s, value); + break; + + case NPCM7XX_SMB_T_OUT: + npcm7xx_smbus_write_t_out(s, value); + break; + + case NPCM7XX_SMB_TXF_STS: + npcm7xx_smbus_write_txf_sts(s, value); + break; + + case NPCM7XX_SMB_RXF_STS: + npcm7xx_smbus_write_rxf_sts(s, value); + break; + + case NPCM7XX_SMB_RXF_CTL: + npcm7xx_smbus_write_rxf_ctl(s, value); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } } else { /* Bank 0 */ switch (offset) { @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write(void *opaque, hwaddr offset, uint64_t value, s->scllt = value; break; + case NPCM7XX_SMB_FIF_CTL: + npcm7xx_smbus_write_fif_ctl(s, value); + break; + case NPCM7XX_SMB_SCLHT: s->sclht = value; break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_enter_reset(Object *obj, ResetType type) s->scllt = NPCM7XX_SMB_SCLLT_INIT_VAL; s->sclht = NPCM7XX_SMB_SCLHT_INIT_VAL; + s->fif_ctl = NPCM7XX_SMB_FIF_CTL_INIT_VAL; + s->fif_cts = NPCM7XX_SMB_FIF_CTS_INIT_VAL; + s->fair_per = NPCM7XX_SMB_FAIR_PER_INIT_VAL; + s->txf_ctl = NPCM7XX_SMB_TXF_CTL_INIT_VAL; + s->t_out = NPCM7XX_SMB_T_OUT_INIT_VAL; + s->txf_sts = NPCM7XX_SMB_TXF_STS_INIT_VAL; + s->rxf_sts = NPCM7XX_SMB_RXF_STS_INIT_VAL; + s->rxf_ctl = NPCM7XX_SMB_RXF_CTL_INIT_VAL; + + npcm7xx_smbus_clear_buffer(s); s->status = NPCM7XX_SMBUS_STATUS_IDLE; + s->rx_cur = 0; } static void npcm7xx_smbus_hold_reset(Object *obj) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_smbus = { VMSTATE_UINT8_ARRAY(addr, NPCM7xxSMBusState, NPCM7XX_SMBUS_NR_ADDRS), VMSTATE_UINT8(scllt, NPCM7xxSMBusState), VMSTATE_UINT8(sclht, NPCM7xxSMBusState), + VMSTATE_UINT8(fif_ctl, NPCM7xxSMBusState), + VMSTATE_UINT8(fif_cts, NPCM7xxSMBusState), + VMSTATE_UINT8(fair_per, NPCM7xxSMBusState), + VMSTATE_UINT8(txf_ctl, NPCM7xxSMBusState), + VMSTATE_UINT8(t_out, NPCM7xxSMBusState), + VMSTATE_UINT8(txf_sts, NPCM7xxSMBusState), + VMSTATE_UINT8(rxf_sts, NPCM7xxSMBusState), + VMSTATE_UINT8(rxf_ctl, NPCM7xxSMBusState), + VMSTATE_UINT8_ARRAY(rx_fifo, NPCM7xxSMBusState, + NPCM7XX_SMBUS_FIFO_SIZE), + VMSTATE_UINT8(rx_cur, NPCM7xxSMBusState), VMSTATE_END_OF_LIST(), }, }; diff --git a/tests/qtest/npcm7xx_smbus-test.c b/tests/qtest/npcm7xx_smbus-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_smbus-test.c +++ b/tests/qtest/npcm7xx_smbus-test.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxSMBusBank1Register { #define ADDR_EN BIT(7) #define ADDR_A(rv) extract8((rv), 0, 6) +/* FIF_CTL fields */ +#define FIF_CTL_FIFO_EN BIT(4) + +/* FIF_CTS fields */ +#define FIF_CTS_CLR_FIFO BIT(6) +#define FIF_CTS_RFTE_IE BIT(3) +#define FIF_CTS_RXF_TXE BIT(1) + +/* TXF_CTL fields */ +#define TXF_CTL_THR_TXIE BIT(6) +#define TXF_CTL_TX_THR(rv) extract8((rv), 0, 5) + +/* TXF_STS fields */ +#define TXF_STS_TX_THST BIT(6) +#define TXF_STS_TX_BYTES(rv) extract8((rv), 0, 5) + +/* RXF_CTL fields */ +#define RXF_CTL_THR_RXIE BIT(6) +#define RXF_CTL_LAST BIT(5) +#define RXF_CTL_RX_THR(rv) extract8((rv), 0, 5) + +/* RXF_STS fields */ +#define RXF_STS_RX_THST BIT(6) +#define RXF_STS_RX_BYTES(rv) extract8((rv), 0, 5) + + +static void choose_bank(QTestState *qts, uint64_t base_addr, uint8_t bank) +{ + uint8_t ctl3 = qtest_readb(qts, base_addr + OFFSET_CTL3); + + if (bank) { + ctl3 |= CTL3_BNK_SEL; + } else { + ctl3 &= ~CTL3_BNK_SEL; + } + + qtest_writeb(qts, base_addr + OFFSET_CTL3, ctl3); +} static void check_running(QTestState *qts, uint64_t base_addr) { @@ -XXX,XX +XXX,XX @@ static void send_byte(QTestState *qts, uint64_t base_addr, uint8_t byte) qtest_writeb(qts, base_addr + OFFSET_SDA, byte); } +static bool check_recv(QTestState *qts, uint64_t base_addr) +{ + uint8_t st, fif_ctl, rxf_ctl, rxf_sts; + bool fifo; + + st = qtest_readb(qts, base_addr + OFFSET_ST); + choose_bank(qts, base_addr, 0); + fif_ctl = qtest_readb(qts, base_addr + OFFSET_FIF_CTL); + fifo = fif_ctl & FIF_CTL_FIFO_EN; + if (!fifo) { + return st == (ST_MODE | ST_SDAST); + } + + choose_bank(qts, base_addr, 1); + rxf_ctl = qtest_readb(qts, base_addr + OFFSET_RXF_CTL); + rxf_sts = qtest_readb(qts, base_addr + OFFSET_RXF_STS); + + if ((rxf_ctl & RXF_CTL_THR_RXIE) && RXF_STS_RX_BYTES(rxf_sts) < 16) { + return st == ST_MODE; + } else { + return st == (ST_MODE | ST_SDAST); + } +} + static uint8_t recv_byte(QTestState *qts, uint64_t base_addr) { - g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, - ST_MODE | ST_SDAST); + g_assert_true(check_recv(qts, base_addr)); return qtest_readb(qts, base_addr + OFFSET_SDA); } @@ -XXX,XX +XXX,XX @@ static void send_address(QTestState *qts, uint64_t base_addr, uint8_t addr, qtest_writeb(qts, base_addr + OFFSET_ST, ST_STASTR); st = qtest_readb(qts, base_addr + OFFSET_ST); if (recv) { - g_assert_cmphex(st, ==, ST_MODE | ST_SDAST); + g_assert_true(check_recv(qts, base_addr)); } else { g_assert_cmphex(st, ==, ST_MODE | ST_XMIT | ST_SDAST); } @@ -XXX,XX +XXX,XX @@ static void send_nack(QTestState *qts, uint64_t base_addr) qtest_writeb(qts, base_addr + OFFSET_CTL1, ctl1); } +static void start_fifo_mode(QTestState *qts, uint64_t base_addr) +{ + choose_bank(qts, base_addr, 0); + qtest_writeb(qts, base_addr + OFFSET_FIF_CTL, FIF_CTL_FIFO_EN); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_FIF_CTL) & + FIF_CTL_FIFO_EN); + choose_bank(qts, base_addr, 1); + qtest_writeb(qts, base_addr + OFFSET_FIF_CTS, + FIF_CTS_CLR_FIFO | FIF_CTS_RFTE_IE); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_FIF_CTS), ==, + FIF_CTS_RFTE_IE); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_TXF_STS), ==, 0); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_RXF_STS), ==, 0); +} + +static void start_recv_fifo(QTestState *qts, uint64_t base_addr, uint8_t bytes) +{ + choose_bank(qts, base_addr, 1); + qtest_writeb(qts, base_addr + OFFSET_TXF_CTL, 0); + qtest_writeb(qts, base_addr + OFFSET_RXF_CTL, + RXF_CTL_THR_RXIE | RXF_CTL_LAST | bytes); +} + /* Check the SMBus's status is set correctly when disabled. */ static void test_disable_bus(gconstpointer data) { @@ -XXX,XX +XXX,XX @@ static void test_single_mode(gconstpointer data) qtest_quit(qts); } +/* Check the SMBus can send and receive bytes in FIFO mode. */ +static void test_fifo_mode(gconstpointer data) +{ + intptr_t index = (intptr_t)data; + uint64_t base_addr = SMBUS_ADDR(index); + int irq = SMBUS_IRQ(index); + uint8_t value = 0x60; + QTestState *qts = qtest_init("-machine npcm750-evb"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + enable_bus(qts, base_addr); + start_fifo_mode(qts, base_addr); + g_assert_false(qtest_get_irq(qts, irq)); + + /* Sending */ + start_transfer(qts, base_addr); + send_address(qts, base_addr, EVB_DEVICE_ADDR, false, true); + choose_bank(qts, base_addr, 1); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_FIF_CTS) & + FIF_CTS_RXF_TXE); + qtest_writeb(qts, base_addr + OFFSET_TXF_CTL, TXF_CTL_THR_TXIE); + send_byte(qts, base_addr, TMP105_REG_CONFIG); + send_byte(qts, base_addr, value); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_FIF_CTS) & + FIF_CTS_RXF_TXE); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_TXF_STS) & + TXF_STS_TX_THST); + g_assert_cmpuint(TXF_STS_TX_BYTES( + qtest_readb(qts, base_addr + OFFSET_TXF_STS)), ==, 0); + g_assert_true(qtest_get_irq(qts, irq)); + stop_transfer(qts, base_addr); + check_stopped(qts, base_addr); + + /* Receiving */ + start_fifo_mode(qts, base_addr); + start_transfer(qts, base_addr); + send_address(qts, base_addr, EVB_DEVICE_ADDR, false, true); + send_byte(qts, base_addr, TMP105_REG_CONFIG); + start_transfer(qts, base_addr); + qtest_writeb(qts, base_addr + OFFSET_FIF_CTS, FIF_CTS_RXF_TXE); + start_recv_fifo(qts, base_addr, 1); + send_address(qts, base_addr, EVB_DEVICE_ADDR, true, true); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_FIF_CTS) & + FIF_CTS_RXF_TXE); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_RXF_STS) & + RXF_STS_RX_THST); + g_assert_cmpuint(RXF_STS_RX_BYTES( + qtest_readb(qts, base_addr + OFFSET_RXF_STS)), ==, 1); + send_nack(qts, base_addr); + stop_transfer(qts, base_addr); + check_running(qts, base_addr); + g_assert_cmphex(recv_byte(qts, base_addr), ==, value); + g_assert_cmpuint(RXF_STS_RX_BYTES( + qtest_readb(qts, base_addr + OFFSET_RXF_STS)), ==, 0); + check_stopped(qts, base_addr); + qtest_quit(qts); +} + static void smbus_add_test(const char *name, int index, GTestDataFunc fn) { g_autofree char *full_name = g_strdup_printf( @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) for (i = 0; i < ARRAY_SIZE(evb_bus_list); ++i) { add_test(single_mode, evb_bus_list[i]); + add_test(fifo_mode, evb_bus_list[i]); } return g_test_run(); diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_smbus_send_byte(const char *id, uint8_t value, int success) "%s send byt npcm7xx_smbus_recv_byte(const char *id, uint8_t value) "%s recv byte: 0x%02x" npcm7xx_smbus_stop(const char *id) "%s stopping" npcm7xx_smbus_nack(const char *id) "%s nacking" +npcm7xx_smbus_recv_fifo(const char *id, uint8_t received, uint8_t expected) "%s recv fifo: received %u, expected %u" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Also add Damien as a reviewer. Signed-off-by: Luc Michel <luc@lmichel.fr> Acked-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210211085318.2507-1-luc@lmichel.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: pc-bios/opensbi-* F: .gitlab-ci.d/opensbi.yml F: .gitlab-ci.d/opensbi/ +Clock framework +M: Luc Michel <luc@lmichel.fr> +R: Damien Hedde <damien.hedde@greensocs.com> +S: Maintained +F: include/hw/clock.h +F: include/hw/qdev-clock.h +F: hw/core/clock.c +F: hw/core/clock-vmstate.c +F: hw/core/qdev-clock.c +F: docs/devel/clocks.rst + Usermode Emulation ------------------ Overall usermode emulation -- 2.20.1 From: Doug Evans <dje@google.com> This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210213002520.1374134-2-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/npcm7xx_emc.h | 286 ++++++++++++ hw/net/npcm7xx_emc.c | 857 +++++++++++++++++++++++++++++++++++ hw/net/meson.build | 1 + hw/net/trace-events | 17 + 4 files changed, 1161 insertions(+) create mode 100644 include/hw/net/npcm7xx_emc.h create mode 100644 hw/net/npcm7xx_emc.c diff --git a/include/hw/net/npcm7xx_emc.h b/include/hw/net/npcm7xx_emc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/npcm7xx_emc.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx EMC Module + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef NPCM7XX_EMC_H +#define NPCM7XX_EMC_H + +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "net/net.h" + +/* 32-bit register indices. */ +enum NPCM7xxPWMRegister { + /* Control registers. */ + REG_CAMCMR, + REG_CAMEN, + + /* There are 16 CAMn[ML] registers. */ + REG_CAMM_BASE, + REG_CAML_BASE, + REG_CAMML_LAST = 0x21, + + REG_TXDLSA = 0x22, + REG_RXDLSA, + REG_MCMDR, + REG_MIID, + REG_MIIDA, + REG_FFTCR, + REG_TSDR, + REG_RSDR, + REG_DMARFC, + REG_MIEN, + + /* Status registers. */ + REG_MISTA, + REG_MGSTA, + REG_MPCNT, + REG_MRPC, + REG_MRPCC, + REG_MREPC, + REG_DMARFS, + REG_CTXDSA, + REG_CTXBSA, + REG_CRXDSA, + REG_CRXBSA, + + NPCM7XX_NUM_EMC_REGS, +}; + +/* REG_CAMCMR fields */ +/* Enable CAM Compare */ +#define REG_CAMCMR_ECMP (1 << 4) +/* Complement CAM Compare */ +#define REG_CAMCMR_CCAM (1 << 3) +/* Accept Broadcast Packet */ +#define REG_CAMCMR_ABP (1 << 2) +/* Accept Multicast Packet */ +#define REG_CAMCMR_AMP (1 << 1) +/* Accept Unicast Packet */ +#define REG_CAMCMR_AUP (1 << 0) + +/* REG_MCMDR fields */ +/* Software Reset */ +#define REG_MCMDR_SWR (1 << 24) +/* Internal Loopback Select */ +#define REG_MCMDR_LBK (1 << 21) +/* Operation Mode Select */ +#define REG_MCMDR_OPMOD (1 << 20) +/* Enable MDC Clock Generation */ +#define REG_MCMDR_ENMDC (1 << 19) +/* Full-Duplex Mode Select */ +#define REG_MCMDR_FDUP (1 << 18) +/* Enable SQE Checking */ +#define REG_MCMDR_ENSEQ (1 << 17) +/* Send PAUSE Frame */ +#define REG_MCMDR_SDPZ (1 << 16) +/* No Defer */ +#define REG_MCMDR_NDEF (1 << 9) +/* Frame Transmission On */ +#define REG_MCMDR_TXON (1 << 8) +/* Strip CRC Checksum */ +#define REG_MCMDR_SPCRC (1 << 5) +/* Accept CRC Error Packet */ +#define REG_MCMDR_AEP (1 << 4) +/* Accept Control Packet */ +#define REG_MCMDR_ACP (1 << 3) +/* Accept Runt Packet */ +#define REG_MCMDR_ARP (1 << 2) +/* Accept Long Packet */ +#define REG_MCMDR_ALP (1 << 1) +/* Frame Reception On */ +#define REG_MCMDR_RXON (1 << 0) + +/* REG_MIEN fields */ +/* Enable Transmit Descriptor Unavailable Interrupt */ +#define REG_MIEN_ENTDU (1 << 23) +/* Enable Transmit Completion Interrupt */ +#define REG_MIEN_ENTXCP (1 << 18) +/* Enable Transmit Interrupt */ +#define REG_MIEN_ENTXINTR (1 << 16) +/* Enable Receive Descriptor Unavailable Interrupt */ +#define REG_MIEN_ENRDU (1 << 10) +/* Enable Receive Good Interrupt */ +#define REG_MIEN_ENRXGD (1 << 4) +/* Enable Receive Interrupt */ +#define REG_MIEN_ENRXINTR (1 << 0) + +/* REG_MISTA fields */ +/* TODO: Add error fields and support simulated errors? */ +/* Transmit Bus Error Interrupt */ +#define REG_MISTA_TXBERR (1 << 24) +/* Transmit Descriptor Unavailable Interrupt */ +#define REG_MISTA_TDU (1 << 23) +/* Transmit Completion Interrupt */ +#define REG_MISTA_TXCP (1 << 18) +/* Transmit Interrupt */ +#define REG_MISTA_TXINTR (1 << 16) +/* Receive Bus Error Interrupt */ +#define REG_MISTA_RXBERR (1 << 11) +/* Receive Descriptor Unavailable Interrupt */ +#define REG_MISTA_RDU (1 << 10) +/* DMA Early Notification Interrupt */ +#define REG_MISTA_DENI (1 << 9) +/* Maximum Frame Length Interrupt */ +#define REG_MISTA_DFOI (1 << 8) +/* Receive Good Interrupt */ +#define REG_MISTA_RXGD (1 << 4) +/* Packet Too Long Interrupt */ +#define REG_MISTA_PTLE (1 << 3) +/* Receive Interrupt */ +#define REG_MISTA_RXINTR (1 << 0) + +/* REG_MGSTA fields */ +/* Transmission Halted */ +#define REG_MGSTA_TXHA (1 << 11) +/* Receive Halted */ +#define REG_MGSTA_RXHA (1 << 11) + +/* REG_DMARFC fields */ +/* Maximum Receive Frame Length */ +#define REG_DMARFC_RXMS(word) extract32((word), 0, 16) + +/* REG MIIDA fields */ +/* Busy Bit */ +#define REG_MIIDA_BUSY (1 << 17) + +/* Transmit and receive descriptors */ +typedef struct NPCM7xxEMCTxDesc NPCM7xxEMCTxDesc; +typedef struct NPCM7xxEMCRxDesc NPCM7xxEMCRxDesc; + +struct NPCM7xxEMCTxDesc { + uint32_t flags; + uint32_t txbsa; + uint32_t status_and_length; + uint32_t ntxdsa; +}; + +struct NPCM7xxEMCRxDesc { + uint32_t status_and_length; + uint32_t rxbsa; + uint32_t reserved; + uint32_t nrxdsa; +}; + +/* NPCM7xxEMCTxDesc.flags values */ +/* Owner: 0 = cpu, 1 = emc */ +#define TX_DESC_FLAG_OWNER_MASK (1 << 31) +/* Transmit interrupt enable */ +#define TX_DESC_FLAG_INTEN (1 << 2) +/* CRC append */ +#define TX_DESC_FLAG_CRCAPP (1 << 1) +/* Padding enable */ +#define TX_DESC_FLAG_PADEN (1 << 0) + +/* NPCM7xxEMCTxDesc.status_and_length values */ +/* Collision count */ +#define TX_DESC_STATUS_CCNT_SHIFT 28 +#define TX_DESC_STATUS_CCNT_BITSIZE 4 +/* SQE error */ +#define TX_DESC_STATUS_SQE (1 << 26) +/* Transmission paused */ +#define TX_DESC_STATUS_PAU (1 << 25) +/* P transmission halted */ +#define TX_DESC_STATUS_TXHA (1 << 24) +/* Late collision */ +#define TX_DESC_STATUS_LC (1 << 23) +/* Transmission abort */ +#define TX_DESC_STATUS_TXABT (1 << 22) +/* No carrier sense */ +#define TX_DESC_STATUS_NCS (1 << 21) +/* Defer exceed */ +#define TX_DESC_STATUS_EXDEF (1 << 20) +/* Transmission complete */ +#define TX_DESC_STATUS_TXCP (1 << 19) +/* Transmission deferred */ +#define TX_DESC_STATUS_DEF (1 << 17) +/* Transmit interrupt */ +#define TX_DESC_STATUS_TXINTR (1 << 16) + +#define TX_DESC_PKT_LEN(word) extract32((word), 0, 16) + +/* Transmit buffer start address */ +#define TX_DESC_TXBSA(word) ((uint32_t) (word) & ~3u) + +/* Next transmit descriptor start address */ +#define TX_DESC_NTXDSA(word) ((uint32_t) (word) & ~3u) + +/* NPCM7xxEMCRxDesc.status_and_length values */ +/* Owner: 0b00 = cpu, 0b01 = undefined, 0b10 = emc, 0b11 = undefined */ +#define RX_DESC_STATUS_OWNER_SHIFT 30 +#define RX_DESC_STATUS_OWNER_BITSIZE 2 +#define RX_DESC_STATUS_OWNER_MASK (3 << RX_DESC_STATUS_OWNER_SHIFT) +/* Runt packet */ +#define RX_DESC_STATUS_RP (1 << 22) +/* Alignment error */ +#define RX_DESC_STATUS_ALIE (1 << 21) +/* Frame reception complete */ +#define RX_DESC_STATUS_RXGD (1 << 20) +/* Packet too long */ +#define RX_DESC_STATUS_PTLE (1 << 19) +/* CRC error */ +#define RX_DESC_STATUS_CRCE (1 << 17) +/* Receive interrupt */ +#define RX_DESC_STATUS_RXINTR (1 << 16) + +#define RX_DESC_PKT_LEN(word) extract32((word), 0, 16) + +/* Receive buffer start address */ +#define RX_DESC_RXBSA(word) ((uint32_t) (word) & ~3u) + +/* Next receive descriptor start address */ +#define RX_DESC_NRXDSA(word) ((uint32_t) (word) & ~3u) + +/* Minimum packet length, when TX_DESC_FLAG_PADEN is set. */ +#define MIN_PACKET_LENGTH 64 + +struct NPCM7xxEMCState { + /*< private >*/ + SysBusDevice parent; + /*< public >*/ + + MemoryRegion iomem; + + qemu_irq tx_irq; + qemu_irq rx_irq; + + NICState *nic; + NICConf conf; + + /* 0 or 1, for log messages */ + uint8_t emc_num; + + uint32_t regs[NPCM7XX_NUM_EMC_REGS]; + + /* + * tx is active. Set to true by TSDR and then switches off when out of + * descriptors. If the TXON bit in REG_MCMDR is off then this is off. + */ + bool tx_active; + + /* + * rx is active. Set to true by RSDR and then switches off when out of + * descriptors. If the RXON bit in REG_MCMDR is off then this is off. + */ + bool rx_active; +}; + +typedef struct NPCM7xxEMCState NPCM7xxEMCState; + +#define TYPE_NPCM7XX_EMC "npcm7xx-emc" +#define NPCM7XX_EMC(obj) \ + OBJECT_CHECK(NPCM7xxEMCState, (obj), TYPE_NPCM7XX_EMC) + +#endif /* NPCM7XX_EMC_H */ diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/npcm7xx_emc.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx EMC Module + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * Unsupported/unimplemented features: + * - MCMDR.FDUP (full duplex) is ignored, half duplex is not supported + * - Only CAM0 is supported, CAM[1-15] are not + * - writes to CAMEN.[1-15] are ignored, these bits always read as zeroes + * - MII is not implemented, MIIDA.BUSY and MIID always return zero + * - MCMDR.LBK is not implemented + * - MCMDR.{OPMOD,ENSQE,AEP,ARP} are not supported + * - H/W FIFOs are not supported, MCMDR.FFTCR is ignored + * - MGSTA.SQE is not supported + * - pause and control frames are not implemented + * - MGSTA.CCNT is not supported + * - MPCNT, DMARFS are not implemented + */ + +#include "qemu/osdep.h" + +/* For crc32 */ +#include <zlib.h> + +#include "qemu-common.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/net/npcm7xx_emc.h" +#include "net/eth.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "sysemu/dma.h" +#include "trace.h" + +#define CRC_LENGTH 4 + +/* + * The maximum size of a (layer 2) ethernet frame as defined by 802.3. + * 1518 = 6(dest macaddr) + 6(src macaddr) + 2(proto) + 4(crc) + 1500(payload) + * This does not include an additional 4 for the vlan field (802.1q). + */ +#define MAX_ETH_FRAME_SIZE 1518 + +static const char *emc_reg_name(int regno) +{ +#define REG(name) case REG_ ## name: return #name; + switch (regno) { + REG(CAMCMR) + REG(CAMEN) + REG(TXDLSA) + REG(RXDLSA) + REG(MCMDR) + REG(MIID) + REG(MIIDA) + REG(FFTCR) + REG(TSDR) + REG(RSDR) + REG(DMARFC) + REG(MIEN) + REG(MISTA) + REG(MGSTA) + REG(MPCNT) + REG(MRPC) + REG(MRPCC) + REG(MREPC) + REG(DMARFS) + REG(CTXDSA) + REG(CTXBSA) + REG(CRXDSA) + REG(CRXBSA) + case REG_CAMM_BASE + 0: return "CAM0M"; + case REG_CAML_BASE + 0: return "CAM0L"; + case REG_CAMM_BASE + 2 ... REG_CAMML_LAST: + /* Only CAM0 is supported, fold the others into something simple. */ + if (regno & 1) { + return "CAM<n>L"; + } else { + return "CAM<n>M"; + } + default: return "UNKNOWN"; + } +#undef REG +} + +static void emc_reset(NPCM7xxEMCState *emc) +{ + trace_npcm7xx_emc_reset(emc->emc_num); + + memset(&emc->regs[0], 0, sizeof(emc->regs)); + + /* These regs have non-zero reset values. */ + emc->regs[REG_TXDLSA] = 0xfffffffc; + emc->regs[REG_RXDLSA] = 0xfffffffc; + emc->regs[REG_MIIDA] = 0x00900000; + emc->regs[REG_FFTCR] = 0x0101; + emc->regs[REG_DMARFC] = 0x0800; + emc->regs[REG_MPCNT] = 0x7fff; + + emc->tx_active = false; + emc->rx_active = false; +} + +static void npcm7xx_emc_reset(DeviceState *dev) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); + emc_reset(emc); +} + +static void emc_soft_reset(NPCM7xxEMCState *emc) +{ + /* + * The docs say at least MCMDR.{LBK,OPMOD} bits are not changed during a + * soft reset, but does not go into further detail. For now, KISS. + */ + uint32_t mcmdr = emc->regs[REG_MCMDR]; + emc_reset(emc); + emc->regs[REG_MCMDR] = mcmdr & (REG_MCMDR_LBK | REG_MCMDR_OPMOD); + + qemu_set_irq(emc->tx_irq, 0); + qemu_set_irq(emc->rx_irq, 0); +} + +static void emc_set_link(NetClientState *nc) +{ + /* Nothing to do yet. */ +} + +/* MISTA.TXINTR is the union of the individual bits with their enables. */ +static void emc_update_mista_txintr(NPCM7xxEMCState *emc) +{ + /* Only look at the bits we support. */ + uint32_t mask = (REG_MISTA_TXBERR | + REG_MISTA_TDU | + REG_MISTA_TXCP); + if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & mask) { + emc->regs[REG_MISTA] |= REG_MISTA_TXINTR; + } else { + emc->regs[REG_MISTA] &= ~REG_MISTA_TXINTR; + } +} + +/* MISTA.RXINTR is the union of the individual bits with their enables. */ +static void emc_update_mista_rxintr(NPCM7xxEMCState *emc) +{ + /* Only look at the bits we support. */ + uint32_t mask = (REG_MISTA_RXBERR | + REG_MISTA_RDU | + REG_MISTA_RXGD); + if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & mask) { + emc->regs[REG_MISTA] |= REG_MISTA_RXINTR; + } else { + emc->regs[REG_MISTA] &= ~REG_MISTA_RXINTR; + } +} + +/* N.B. emc_update_mista_txintr must have already been called. */ +static void emc_update_tx_irq(NPCM7xxEMCState *emc) +{ + int level = !!(emc->regs[REG_MISTA] & + emc->regs[REG_MIEN] & + REG_MISTA_TXINTR); + trace_npcm7xx_emc_update_tx_irq(level); + qemu_set_irq(emc->tx_irq, level); +} + +/* N.B. emc_update_mista_rxintr must have already been called. */ +static void emc_update_rx_irq(NPCM7xxEMCState *emc) +{ + int level = !!(emc->regs[REG_MISTA] & + emc->regs[REG_MIEN] & + REG_MISTA_RXINTR); + trace_npcm7xx_emc_update_rx_irq(level); + qemu_set_irq(emc->rx_irq, level); +} + +/* Update IRQ states due to changes in MIEN,MISTA. */ +static void emc_update_irq_from_reg_change(NPCM7xxEMCState *emc) +{ + emc_update_mista_txintr(emc); + emc_update_tx_irq(emc); + + emc_update_mista_rxintr(emc); + emc_update_rx_irq(emc); +} + +static int emc_read_tx_desc(dma_addr_t addr, NPCM7xxEMCTxDesc *desc) +{ + if (dma_memory_read(&address_space_memory, addr, desc, sizeof(*desc))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read descriptor @ 0x%" + HWADDR_PRIx "\n", __func__, addr); + return -1; + } + desc->flags = le32_to_cpu(desc->flags); + desc->txbsa = le32_to_cpu(desc->txbsa); + desc->status_and_length = le32_to_cpu(desc->status_and_length); + desc->ntxdsa = le32_to_cpu(desc->ntxdsa); + return 0; +} + +static int emc_write_tx_desc(const NPCM7xxEMCTxDesc *desc, dma_addr_t addr) +{ + NPCM7xxEMCTxDesc le_desc; + + le_desc.flags = cpu_to_le32(desc->flags); + le_desc.txbsa = cpu_to_le32(desc->txbsa); + le_desc.status_and_length = cpu_to_le32(desc->status_and_length); + le_desc.ntxdsa = cpu_to_le32(desc->ntxdsa); + if (dma_memory_write(&address_space_memory, addr, &le_desc, + sizeof(le_desc))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to write descriptor @ 0x%" + HWADDR_PRIx "\n", __func__, addr); + return -1; + } + return 0; +} + +static int emc_read_rx_desc(dma_addr_t addr, NPCM7xxEMCRxDesc *desc) +{ + if (dma_memory_read(&address_space_memory, addr, desc, sizeof(*desc))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read descriptor @ 0x%" + HWADDR_PRIx "\n", __func__, addr); + return -1; + } + desc->status_and_length = le32_to_cpu(desc->status_and_length); + desc->rxbsa = le32_to_cpu(desc->rxbsa); + desc->reserved = le32_to_cpu(desc->reserved); + desc->nrxdsa = le32_to_cpu(desc->nrxdsa); + return 0; +} + +static int emc_write_rx_desc(const NPCM7xxEMCRxDesc *desc, dma_addr_t addr) +{ + NPCM7xxEMCRxDesc le_desc; + + le_desc.status_and_length = cpu_to_le32(desc->status_and_length); + le_desc.rxbsa = cpu_to_le32(desc->rxbsa); + le_desc.reserved = cpu_to_le32(desc->reserved); + le_desc.nrxdsa = cpu_to_le32(desc->nrxdsa); + if (dma_memory_write(&address_space_memory, addr, &le_desc, + sizeof(le_desc))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to write descriptor @ 0x%" + HWADDR_PRIx "\n", __func__, addr); + return -1; + } + return 0; +} + +static void emc_set_mista(NPCM7xxEMCState *emc, uint32_t flags) +{ + trace_npcm7xx_emc_set_mista(flags); + emc->regs[REG_MISTA] |= flags; + if (extract32(flags, 16, 16)) { + emc_update_mista_txintr(emc); + } + if (extract32(flags, 0, 16)) { + emc_update_mista_rxintr(emc); + } +} + +static void emc_halt_tx(NPCM7xxEMCState *emc, uint32_t mista_flag) +{ + emc->tx_active = false; + emc_set_mista(emc, mista_flag); +} + +static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) +{ + emc->rx_active = false; + emc_set_mista(emc, mista_flag); +} + +static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, + const NPCM7xxEMCTxDesc *tx_desc, + uint32_t desc_addr) +{ + /* Update the current descriptor, if only to reset the owner flag. */ + if (emc_write_tx_desc(tx_desc, desc_addr)) { + /* + * We just read it so this shouldn't generally happen. + * Error already reported. + */ + emc_set_mista(emc, REG_MISTA_TXBERR); + } + emc->regs[REG_CTXDSA] = TX_DESC_NTXDSA(tx_desc->ntxdsa); +} + +static void emc_set_next_rx_descriptor(NPCM7xxEMCState *emc, + const NPCM7xxEMCRxDesc *rx_desc, + uint32_t desc_addr) +{ + /* Update the current descriptor, if only to reset the owner flag. */ + if (emc_write_rx_desc(rx_desc, desc_addr)) { + /* + * We just read it so this shouldn't generally happen. + * Error already reported. + */ + emc_set_mista(emc, REG_MISTA_RXBERR); + } + emc->regs[REG_CRXDSA] = RX_DESC_NRXDSA(rx_desc->nrxdsa); +} + +static void emc_try_send_next_packet(NPCM7xxEMCState *emc) +{ + /* Working buffer for sending out packets. Most packets fit in this. */ +#define TX_BUFFER_SIZE 2048 + uint8_t tx_send_buffer[TX_BUFFER_SIZE]; + uint32_t desc_addr = TX_DESC_NTXDSA(emc->regs[REG_CTXDSA]); + NPCM7xxEMCTxDesc tx_desc; + uint32_t next_buf_addr, length; + uint8_t *buf; + g_autofree uint8_t *malloced_buf = NULL; + + if (emc_read_tx_desc(desc_addr, &tx_desc)) { + /* Error reading descriptor, already reported. */ + emc_halt_tx(emc, REG_MISTA_TXBERR); + emc_update_tx_irq(emc); + return; + } + + /* Nothing we can do if we don't own the descriptor. */ + if (!(tx_desc.flags & TX_DESC_FLAG_OWNER_MASK)) { + trace_npcm7xx_emc_cpu_owned_desc(desc_addr); + emc_halt_tx(emc, REG_MISTA_TDU); + emc_update_tx_irq(emc); + return; + } + + /* Give the descriptor back regardless of what happens. */ + tx_desc.flags &= ~TX_DESC_FLAG_OWNER_MASK; + tx_desc.status_and_length &= 0xffff; + + /* + * Despite the h/w documentation saying the tx buffer is word aligned, + * the linux driver does not word align the buffer. There is value in not + * aligning the buffer: See the description of NET_IP_ALIGN in linux + * kernel sources. + */ + next_buf_addr = tx_desc.txbsa; + emc->regs[REG_CTXBSA] = next_buf_addr; + length = TX_DESC_PKT_LEN(tx_desc.status_and_length); + buf = &tx_send_buffer[0]; + + if (length > sizeof(tx_send_buffer)) { + malloced_buf = g_malloc(length); + buf = malloced_buf; + } + + if (dma_memory_read(&address_space_memory, next_buf_addr, buf, length)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read packet @ 0x%x\n", + __func__, next_buf_addr); + emc_set_mista(emc, REG_MISTA_TXBERR); + emc_set_next_tx_descriptor(emc, &tx_desc, desc_addr); + emc_update_tx_irq(emc); + trace_npcm7xx_emc_tx_done(emc->regs[REG_CTXDSA]); + return; + } + + if ((tx_desc.flags & TX_DESC_FLAG_PADEN) && (length < MIN_PACKET_LENGTH)) { + memset(buf + length, 0, MIN_PACKET_LENGTH - length); + length = MIN_PACKET_LENGTH; + } + + /* N.B. emc_receive can get called here. */ + qemu_send_packet(qemu_get_queue(emc->nic), buf, length); + trace_npcm7xx_emc_sent_packet(length); + + tx_desc.status_and_length |= TX_DESC_STATUS_TXCP; + if (tx_desc.flags & TX_DESC_FLAG_INTEN) { + emc_set_mista(emc, REG_MISTA_TXCP); + } + if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & REG_MISTA_TXINTR) { + tx_desc.status_and_length |= TX_DESC_STATUS_TXINTR; + } + + emc_set_next_tx_descriptor(emc, &tx_desc, desc_addr); + emc_update_tx_irq(emc); + trace_npcm7xx_emc_tx_done(emc->regs[REG_CTXDSA]); +} + +static bool emc_can_receive(NetClientState *nc) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(qemu_get_nic_opaque(nc)); + + bool can_receive = emc->rx_active; + trace_npcm7xx_emc_can_receive(can_receive); + return can_receive; +} + +/* If result is false then *fail_reason contains the reason. */ +static bool emc_receive_filter1(NPCM7xxEMCState *emc, const uint8_t *buf, + size_t len, const char **fail_reason) +{ + eth_pkt_types_e pkt_type = get_eth_packet_type(PKT_GET_ETH_HDR(buf)); + + switch (pkt_type) { + case ETH_PKT_BCAST: + if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { + return true; + } else { + *fail_reason = "Broadcast packet disabled"; + return !!(emc->regs[REG_CAMCMR] & REG_CAMCMR_ABP); + } + case ETH_PKT_MCAST: + if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { + return true; + } else { + *fail_reason = "Multicast packet disabled"; + return !!(emc->regs[REG_CAMCMR] & REG_CAMCMR_AMP); + } + case ETH_PKT_UCAST: { + bool matches; + if (emc->regs[REG_CAMCMR] & REG_CAMCMR_AUP) { + return true; + } + matches = ((emc->regs[REG_CAMCMR] & REG_CAMCMR_ECMP) && + /* We only support one CAM register, CAM0. */ + (emc->regs[REG_CAMEN] & (1 << 0)) && + memcmp(buf, emc->conf.macaddr.a, ETH_ALEN) == 0); + if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { + *fail_reason = "MACADDR matched, comparison complemented"; + return !matches; + } else { + *fail_reason = "MACADDR didn't match"; + return matches; + } + } + default: + g_assert_not_reached(); + } +} + +static bool emc_receive_filter(NPCM7xxEMCState *emc, const uint8_t *buf, + size_t len) +{ + const char *fail_reason = NULL; + bool ok = emc_receive_filter1(emc, buf, len, &fail_reason); + if (!ok) { + trace_npcm7xx_emc_packet_filtered_out(fail_reason); + } + return ok; +} + +static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(qemu_get_nic_opaque(nc)); + const uint32_t len = len1; + size_t max_frame_len; + bool long_frame; + uint32_t desc_addr; + NPCM7xxEMCRxDesc rx_desc; + uint32_t crc; + uint8_t *crc_ptr; + uint32_t buf_addr; + + trace_npcm7xx_emc_receiving_packet(len); + + if (!emc_can_receive(nc)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Unexpected packet\n", __func__); + return -1; + } + + if (len < ETH_HLEN || + /* Defensive programming: drop unsupportable large packets. */ + len > 0xffff - CRC_LENGTH) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Dropped frame of %u bytes\n", + __func__, len); + return len; + } + + /* + * DENI is set if EMC received the Length/Type field of the incoming + * packet, so it will be set regardless of what happens next. + */ + emc_set_mista(emc, REG_MISTA_DENI); + + if (!emc_receive_filter(emc, buf, len)) { + emc_update_rx_irq(emc); + return len; + } + + /* Huge frames (> DMARFC) are dropped. */ + max_frame_len = REG_DMARFC_RXMS(emc->regs[REG_DMARFC]); + if (len + CRC_LENGTH > max_frame_len) { + trace_npcm7xx_emc_packet_dropped(len); + emc_set_mista(emc, REG_MISTA_DFOI); + emc_update_rx_irq(emc); + return len; + } + + /* + * Long Frames (> MAX_ETH_FRAME_SIZE) are also dropped, unless MCMDR.ALP + * is set. + */ + long_frame = false; + if (len + CRC_LENGTH > MAX_ETH_FRAME_SIZE) { + if (emc->regs[REG_MCMDR] & REG_MCMDR_ALP) { + long_frame = true; + } else { + trace_npcm7xx_emc_packet_dropped(len); + emc_set_mista(emc, REG_MISTA_PTLE); + emc_update_rx_irq(emc); + return len; + } + } + + desc_addr = RX_DESC_NRXDSA(emc->regs[REG_CRXDSA]); + if (emc_read_rx_desc(desc_addr, &rx_desc)) { + /* Error reading descriptor, already reported. */ + emc_halt_rx(emc, REG_MISTA_RXBERR); + emc_update_rx_irq(emc); + return len; + } + + /* Nothing we can do if we don't own the descriptor. */ + if (!(rx_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK)) { + trace_npcm7xx_emc_cpu_owned_desc(desc_addr); + emc_halt_rx(emc, REG_MISTA_RDU); + emc_update_rx_irq(emc); + return len; + } + + crc = 0; + crc_ptr = (uint8_t *) &crc; + if (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC)) { + crc = cpu_to_be32(crc32(~0, buf, len)); + } + + /* Give the descriptor back regardless of what happens. */ + rx_desc.status_and_length &= ~RX_DESC_STATUS_OWNER_MASK; + + buf_addr = rx_desc.rxbsa; + emc->regs[REG_CRXBSA] = buf_addr; + if (dma_memory_write(&address_space_memory, buf_addr, buf, len) || + (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC) && + dma_memory_write(&address_space_memory, buf_addr + len, crc_ptr, + 4))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bus error writing packet\n", + __func__); + emc_set_mista(emc, REG_MISTA_RXBERR); + emc_set_next_rx_descriptor(emc, &rx_desc, desc_addr); + emc_update_rx_irq(emc); + trace_npcm7xx_emc_rx_done(emc->regs[REG_CRXDSA]); + return len; + } + + trace_npcm7xx_emc_received_packet(len); + + /* Note: We've already verified len+4 <= 0xffff. */ + rx_desc.status_and_length = len; + if (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC)) { + rx_desc.status_and_length += 4; + } + rx_desc.status_and_length |= RX_DESC_STATUS_RXGD; + emc_set_mista(emc, REG_MISTA_RXGD); + + if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & REG_MISTA_RXINTR) { + rx_desc.status_and_length |= RX_DESC_STATUS_RXINTR; + } + if (long_frame) { + rx_desc.status_and_length |= RX_DESC_STATUS_PTLE; + } + + emc_set_next_rx_descriptor(emc, &rx_desc, desc_addr); + emc_update_rx_irq(emc); + trace_npcm7xx_emc_rx_done(emc->regs[REG_CRXDSA]); + return len; +} + +static void emc_try_receive_next_packet(NPCM7xxEMCState *emc) +{ + if (emc_can_receive(qemu_get_queue(emc->nic))) { + qemu_flush_queued_packets(qemu_get_queue(emc->nic)); + } +} + +static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCM7xxEMCState *emc = opaque; + uint32_t reg = offset / sizeof(uint32_t); + uint32_t result; + + if (reg >= NPCM7XX_NUM_EMC_REGS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Invalid offset 0x%04" HWADDR_PRIx "\n", + __func__, offset); + return 0; + } + + switch (reg) { + case REG_MIID: + /* + * We don't implement MII. For determinism, always return zero as + * writes record the last value written for debugging purposes. + */ + qemu_log_mask(LOG_UNIMP, "%s: Read of MIID, returning 0\n", __func__); + result = 0; + break; + case REG_TSDR: + case REG_RSDR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Read of write-only reg, %s/%d\n", + __func__, emc_reg_name(reg), reg); + return 0; + default: + result = emc->regs[reg]; + break; + } + + trace_npcm7xx_emc_reg_read(emc->emc_num, result, emc_reg_name(reg), reg); + return result; +} + +static void npcm7xx_emc_write(void *opaque, hwaddr offset, + uint64_t v, unsigned size) +{ + NPCM7xxEMCState *emc = opaque; + uint32_t reg = offset / sizeof(uint32_t); + uint32_t value = v; + + g_assert(size == sizeof(uint32_t)); + + if (reg >= NPCM7XX_NUM_EMC_REGS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Invalid offset 0x%04" HWADDR_PRIx "\n", + __func__, offset); + return; + } + + trace_npcm7xx_emc_reg_write(emc->emc_num, emc_reg_name(reg), reg, value); + + switch (reg) { + case REG_CAMCMR: + emc->regs[reg] = value; + break; + case REG_CAMEN: + /* Only CAM0 is supported, don't pretend otherwise. */ + if (value & ~1) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Only CAM0 is supported, cannot enable others" + ": 0x%x\n", + __func__, value); + } + emc->regs[reg] = value & 1; + break; + case REG_CAMM_BASE + 0: + emc->regs[reg] = value; + emc->conf.macaddr.a[0] = value >> 24; + emc->conf.macaddr.a[1] = value >> 16; + emc->conf.macaddr.a[2] = value >> 8; + emc->conf.macaddr.a[3] = value >> 0; + break; + case REG_CAML_BASE + 0: + emc->regs[reg] = value; + emc->conf.macaddr.a[4] = value >> 24; + emc->conf.macaddr.a[5] = value >> 16; + break; + case REG_MCMDR: { + uint32_t prev; + if (value & REG_MCMDR_SWR) { + emc_soft_reset(emc); + /* On h/w the reset happens over multiple cycles. For now KISS. */ + break; + } + prev = emc->regs[reg]; + emc->regs[reg] = value; + /* Update tx state. */ + if (!(prev & REG_MCMDR_TXON) && + (value & REG_MCMDR_TXON)) { + emc->regs[REG_CTXDSA] = emc->regs[REG_TXDLSA]; + /* + * Linux kernel turns TX on with CPU still holding descriptor, + * which suggests we should wait for a write to TSDR before trying + * to send a packet: so we don't send one here. + */ + } else if ((prev & REG_MCMDR_TXON) && + !(value & REG_MCMDR_TXON)) { + emc->regs[REG_MGSTA] |= REG_MGSTA_TXHA; + } + if (!(value & REG_MCMDR_TXON)) { + emc_halt_tx(emc, 0); + } + /* Update rx state. */ + if (!(prev & REG_MCMDR_RXON) && + (value & REG_MCMDR_RXON)) { + emc->regs[REG_CRXDSA] = emc->regs[REG_RXDLSA]; + } else if ((prev & REG_MCMDR_RXON) && + !(value & REG_MCMDR_RXON)) { + emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; + } + if (!(value & REG_MCMDR_RXON)) { + emc_halt_rx(emc, 0); + } + break; + } + case REG_TXDLSA: + case REG_RXDLSA: + case REG_DMARFC: + case REG_MIID: + emc->regs[reg] = value; + break; + case REG_MIEN: + emc->regs[reg] = value; + emc_update_irq_from_reg_change(emc); + break; + case REG_MISTA: + /* Clear the bits that have 1 in "value". */ + emc->regs[reg] &= ~value; + emc_update_irq_from_reg_change(emc); + break; + case REG_MGSTA: + /* Clear the bits that have 1 in "value". */ + emc->regs[reg] &= ~value; + break; + case REG_TSDR: + if (emc->regs[REG_MCMDR] & REG_MCMDR_TXON) { + emc->tx_active = true; + /* Keep trying to send packets until we run out. */ + while (emc->tx_active) { + emc_try_send_next_packet(emc); + } + } + break; + case REG_RSDR: + if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { + emc->rx_active = true; + emc_try_receive_next_packet(emc); + } + break; + case REG_MIIDA: + emc->regs[reg] = value & ~REG_MIIDA_BUSY; + break; + case REG_MRPC: + case REG_MRPCC: + case REG_MREPC: + case REG_CTXDSA: + case REG_CTXBSA: + case REG_CRXDSA: + case REG_CRXBSA: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write to read-only reg %s/%d\n", + __func__, emc_reg_name(reg), reg); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: Write to unimplemented reg %s/%d\n", + __func__, emc_reg_name(reg), reg); + break; + } +} + +static const struct MemoryRegionOps npcm7xx_emc_ops = { + .read = npcm7xx_emc_read, + .write = npcm7xx_emc_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void emc_cleanup(NetClientState *nc) +{ + /* Nothing to do yet. */ +} + +static NetClientInfo net_npcm7xx_emc_info = { + .type = NET_CLIENT_DRIVER_NIC, + .size = sizeof(NICState), + .can_receive = emc_can_receive, + .receive = emc_receive, + .cleanup = emc_cleanup, + .link_status_changed = emc_set_link, +}; + +static void npcm7xx_emc_realize(DeviceState *dev, Error **errp) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(emc); + + memory_region_init_io(&emc->iomem, OBJECT(emc), &npcm7xx_emc_ops, emc, + TYPE_NPCM7XX_EMC, 4 * KiB); + sysbus_init_mmio(sbd, &emc->iomem); + sysbus_init_irq(sbd, &emc->tx_irq); + sysbus_init_irq(sbd, &emc->rx_irq); + + qemu_macaddr_default_if_unset(&emc->conf.macaddr); + emc->nic = qemu_new_nic(&net_npcm7xx_emc_info, &emc->conf, + object_get_typename(OBJECT(dev)), dev->id, emc); + qemu_format_nic_info_str(qemu_get_queue(emc->nic), emc->conf.macaddr.a); +} + +static void npcm7xx_emc_unrealize(DeviceState *dev) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); + + qemu_del_nic(emc->nic); +} + +static const VMStateDescription vmstate_npcm7xx_emc = { + .name = TYPE_NPCM7XX_EMC, + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(emc_num, NPCM7xxEMCState), + VMSTATE_UINT32_ARRAY(regs, NPCM7xxEMCState, NPCM7XX_NUM_EMC_REGS), + VMSTATE_BOOL(tx_active, NPCM7xxEMCState), + VMSTATE_BOOL(rx_active, NPCM7xxEMCState), + VMSTATE_END_OF_LIST(), + }, +}; + +static Property npcm7xx_emc_properties[] = { + DEFINE_NIC_PROPERTIES(NPCM7xxEMCState, conf), + DEFINE_PROP_END_OF_LIST(), +}; + +static void npcm7xx_emc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); + dc->desc = "NPCM7xx EMC Controller"; + dc->realize = npcm7xx_emc_realize; + dc->unrealize = npcm7xx_emc_unrealize; + dc->reset = npcm7xx_emc_reset; + dc->vmsd = &vmstate_npcm7xx_emc; + device_class_set_props(dc, npcm7xx_emc_properties); +} + +static const TypeInfo npcm7xx_emc_info = { + .name = TYPE_NPCM7XX_EMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxEMCState), + .class_init = npcm7xx_emc_class_init, +}; + +static void npcm7xx_emc_register_type(void) +{ + type_register_static(&npcm7xx_emc_info); +} + +type_init(npcm7xx_emc_register_type) diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_I82596_COMMON', if_true: files('i82596.c')) softmmu_ss.add(when: 'CONFIG_SUNHME', if_true: files('sunhme.c')) softmmu_ss.add(when: 'CONFIG_FTGMAC100', if_true: files('ftgmac100.c')) softmmu_ss.add(when: 'CONFIG_SUNGEM', if_true: files('sungem.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_emc.c')) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_eth.c')) softmmu_ss.add(when: 'CONFIG_COLDFIRE', if_true: files('mcf_fec.c')) diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ imx_fec_receive_last(int last) "rx frame flags 0x%04x" imx_enet_receive(size_t size) "len %zu" imx_enet_receive_len(uint64_t addr, int len) "rx_bd 0x%"PRIx64" length %d" imx_enet_receive_last(int last) "rx frame flags 0x%04x" + +# npcm7xx_emc.c +npcm7xx_emc_reset(int emc_num) "Resetting emc%d" +npcm7xx_emc_update_tx_irq(int level) "Setting tx irq to %d" +npcm7xx_emc_update_rx_irq(int level) "Setting rx irq to %d" +npcm7xx_emc_set_mista(uint32_t flags) "ORing 0x%x into MISTA" +npcm7xx_emc_cpu_owned_desc(uint32_t addr) "Can't process cpu-owned descriptor @0x%x" +npcm7xx_emc_sent_packet(uint32_t len) "Sent %u byte packet" +npcm7xx_emc_tx_done(uint32_t ctxdsa) "TX done, CTXDSA=0x%x" +npcm7xx_emc_can_receive(int can_receive) "Can receive: %d" +npcm7xx_emc_packet_filtered_out(const char* fail_reason) "Packet filtered out: %s" +npcm7xx_emc_packet_dropped(uint32_t len) "%u byte packet dropped" +npcm7xx_emc_receiving_packet(uint32_t len) "Receiving %u byte packet" +npcm7xx_emc_received_packet(uint32_t len) "Received %u byte packet" +npcm7xx_emc_rx_done(uint32_t crxdsa) "RX done, CRXDSA=0x%x" +npcm7xx_emc_reg_read(int emc_num, uint32_t result, const char *name, int regno) "emc%d: 0x%x = reg[%s/%d]" +npcm7xx_emc_reg_write(int emc_num, const char *name, int regno, uint32_t value) "emc%d: reg[%s/%d] = 0x%x" -- 2.20.1 From: Doug Evans <dje@google.com> This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210213002520.1374134-3-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 3 ++- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 50 +++++++++++++++++++++++++++++++++++-- 3 files changed, 52 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Analog to Digital Converter (ADC) * Pulse Width Modulation (PWM) * SMBus controller (SMBF) + * Ethernet controller (EMC) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Shared memory (SHM) * eSPI slave interface - * Ethernet controllers (GMAC and EMC) + * Ethernet controller (GMAC) * USB device (USBD) * Peripheral SPI controller (PSPI) * SD/MMC host diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/npcm7xx_gcr.h" #include "hw/misc/npcm7xx_pwm.h" #include "hw/misc/npcm7xx_rng.h" +#include "hw/net/npcm7xx_emc.h" #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { EHCISysBusState ehci; OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; + NPCM7xxEMCState emc[2]; } NPCM7xxState; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_UART1_IRQ, NPCM7XX_UART2_IRQ, NPCM7XX_UART3_IRQ, + NPCM7XX_EMC1RX_IRQ = 15, + NPCM7XX_EMC1TX_IRQ, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_SMBUS15_IRQ, NPCM7XX_PWM0_IRQ = 93, /* PWM module 0 */ NPCM7XX_PWM1_IRQ, /* PWM module 1 */ + NPCM7XX_EMC2RX_IRQ = 114, + NPCM7XX_EMC2TX_IRQ, NPCM7XX_GPIO0_IRQ = 116, NPCM7XX_GPIO1_IRQ, NPCM7XX_GPIO2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_smbus_addr[] = { 0xf008f000, }; +/* Register base address for each EMC Module */ +static const hwaddr npcm7xx_emc_addr[] = { + 0xf0825000, + 0xf0826000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->pwm); i++) { object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM); } + + for (i = 0; i < ARRAY_SIZE(s->emc); i++) { + object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); + } } static void npcm7xx_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i)); } + /* + * EMC Modules. Cannot fail. + * The mapping of the device to its netdev backend works as follows: + * emc[i] = nd_table[i] + * This works around the inability to specify the netdev property for the + * emc device: it's not pluggable and thus the -device option can't be + * used. + */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_emc_addr) != ARRAY_SIZE(s->emc)); + QEMU_BUILD_BUG_ON(ARRAY_SIZE(s->emc) != 2); + for (i = 0; i < ARRAY_SIZE(s->emc); i++) { + s->emc[i].emc_num = i; + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->emc[i]); + if (nd_table[i].used) { + qemu_check_nic_model(&nd_table[i], TYPE_NPCM7XX_EMC); + qdev_set_nic_properties(DEVICE(sbd), &nd_table[i]); + } + /* + * The device exists regardless of whether it's connected to a QEMU + * netdev backend. So always instantiate it even if there is no + * backend. + */ + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_emc_addr[i]); + int tx_irq = i == 0 ? NPCM7XX_EMC1TX_IRQ : NPCM7XX_EMC2TX_IRQ; + int rx_irq = i == 0 ? NPCM7XX_EMC1RX_IRQ : NPCM7XX_EMC2RX_IRQ; + /* + * N.B. The values for the second argument sysbus_connect_irq are + * chosen to match the registration order in npcm7xx_emc_realize. + */ + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, tx_irq)); + sysbus_connect_irq(sbd, 1, npcm7xx_irq(s, rx_irq)); + } + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.vcd", 0xf0810000, 64 * KiB); create_unimplemented_device("npcm7xx.ece", 0xf0820000, 8 * KiB); create_unimplemented_device("npcm7xx.vdma", 0xf0822000, 8 * KiB); - create_unimplemented_device("npcm7xx.emc1", 0xf0825000, 4 * KiB); - create_unimplemented_device("npcm7xx.emc2", 0xf0826000, 4 * KiB); create_unimplemented_device("npcm7xx.usbd[0]", 0xf0830000, 4 * KiB); create_unimplemented_device("npcm7xx.usbd[1]", 0xf0831000, 4 * KiB); create_unimplemented_device("npcm7xx.usbd[2]", 0xf0832000, 4 * KiB); -- 2.20.1 From: Doug Evans <dje@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210213002520.1374134-4-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_emc-test.c | 862 +++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 863 insertions(+) create mode 100644 tests/qtest/npcm7xx_emc-test.c diff --git a/tests/qtest/npcm7xx_emc-test.c b/tests/qtest/npcm7xx_emc-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_emc-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx EMC Modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "libqos/libqos.h" +#include "qapi/qmp/qdict.h" +#include "qapi/qmp/qnum.h" +#include "qemu/bitops.h" +#include "qemu/iov.h" + +/* Name of the emc device. */ +#define TYPE_NPCM7XX_EMC "npcm7xx-emc" + +/* Timeout for various operations, in seconds. */ +#define TIMEOUT_SECONDS 10 + +/* Address in memory of the descriptor. */ +#define DESC_ADDR (1 << 20) /* 1 MiB */ + +/* Address in memory of the data packet. */ +#define DATA_ADDR (DESC_ADDR + 4096) + +#define CRC_LENGTH 4 + +#define NUM_TX_DESCRIPTORS 3 +#define NUM_RX_DESCRIPTORS 2 + +/* Size of tx,rx test buffers. */ +#define TX_DATA_LEN 64 +#define RX_DATA_LEN 64 + +#define TX_STEP_COUNT 10000 +#define RX_STEP_COUNT 10000 + +/* 32-bit register indices. */ +typedef enum NPCM7xxPWMRegister { + /* Control registers. */ + REG_CAMCMR, + REG_CAMEN, + + /* There are 16 CAMn[ML] registers. */ + REG_CAMM_BASE, + REG_CAML_BASE, + + REG_TXDLSA = 0x22, + REG_RXDLSA, + REG_MCMDR, + REG_MIID, + REG_MIIDA, + REG_FFTCR, + REG_TSDR, + REG_RSDR, + REG_DMARFC, + REG_MIEN, + + /* Status registers. */ + REG_MISTA, + REG_MGSTA, + REG_MPCNT, + REG_MRPC, + REG_MRPCC, + REG_MREPC, + REG_DMARFS, + REG_CTXDSA, + REG_CTXBSA, + REG_CRXDSA, + REG_CRXBSA, + + NPCM7XX_NUM_EMC_REGS, +} NPCM7xxPWMRegister; + +enum { NUM_CAMML_REGS = 16 }; + +/* REG_CAMCMR fields */ +/* Enable CAM Compare */ +#define REG_CAMCMR_ECMP (1 << 4) +/* Accept Unicast Packet */ +#define REG_CAMCMR_AUP (1 << 0) + +/* REG_MCMDR fields */ +/* Software Reset */ +#define REG_MCMDR_SWR (1 << 24) +/* Frame Transmission On */ +#define REG_MCMDR_TXON (1 << 8) +/* Accept Long Packet */ +#define REG_MCMDR_ALP (1 << 1) +/* Frame Reception On */ +#define REG_MCMDR_RXON (1 << 0) + +/* REG_MIEN fields */ +/* Enable Transmit Completion Interrupt */ +#define REG_MIEN_ENTXCP (1 << 18) +/* Enable Transmit Interrupt */ +#define REG_MIEN_ENTXINTR (1 << 16) +/* Enable Receive Good Interrupt */ +#define REG_MIEN_ENRXGD (1 << 4) +/* ENable Receive Interrupt */ +#define REG_MIEN_ENRXINTR (1 << 0) + +/* REG_MISTA fields */ +/* Transmit Bus Error Interrupt */ +#define REG_MISTA_TXBERR (1 << 24) +/* Transmit Descriptor Unavailable Interrupt */ +#define REG_MISTA_TDU (1 << 23) +/* Transmit Completion Interrupt */ +#define REG_MISTA_TXCP (1 << 18) +/* Transmit Interrupt */ +#define REG_MISTA_TXINTR (1 << 16) +/* Receive Bus Error Interrupt */ +#define REG_MISTA_RXBERR (1 << 11) +/* Receive Descriptor Unavailable Interrupt */ +#define REG_MISTA_RDU (1 << 10) +/* DMA Early Notification Interrupt */ +#define REG_MISTA_DENI (1 << 9) +/* Maximum Frame Length Interrupt */ +#define REG_MISTA_DFOI (1 << 8) +/* Receive Good Interrupt */ +#define REG_MISTA_RXGD (1 << 4) +/* Packet Too Long Interrupt */ +#define REG_MISTA_PTLE (1 << 3) +/* Receive Interrupt */ +#define REG_MISTA_RXINTR (1 << 0) + +typedef struct NPCM7xxEMCTxDesc NPCM7xxEMCTxDesc; +typedef struct NPCM7xxEMCRxDesc NPCM7xxEMCRxDesc; + +struct NPCM7xxEMCTxDesc { + uint32_t flags; + uint32_t txbsa; + uint32_t status_and_length; + uint32_t ntxdsa; +}; + +struct NPCM7xxEMCRxDesc { + uint32_t status_and_length; + uint32_t rxbsa; + uint32_t reserved; + uint32_t nrxdsa; +}; + +/* NPCM7xxEMCTxDesc.flags values */ +/* Owner: 0 = cpu, 1 = emc */ +#define TX_DESC_FLAG_OWNER_MASK (1 << 31) +/* Transmit interrupt enable */ +#define TX_DESC_FLAG_INTEN (1 << 2) + +/* NPCM7xxEMCTxDesc.status_and_length values */ +/* Transmission complete */ +#define TX_DESC_STATUS_TXCP (1 << 19) +/* Transmit interrupt */ +#define TX_DESC_STATUS_TXINTR (1 << 16) + +/* NPCM7xxEMCRxDesc.status_and_length values */ +/* Owner: 0b00 = cpu, 0b10 = emc */ +#define RX_DESC_STATUS_OWNER_SHIFT 30 +#define RX_DESC_STATUS_OWNER_MASK 0xc0000000 +/* Frame Reception Complete */ +#define RX_DESC_STATUS_RXGD (1 << 20) +/* Packet too long */ +#define RX_DESC_STATUS_PTLE (1 << 19) +/* Receive Interrupt */ +#define RX_DESC_STATUS_RXINTR (1 << 16) + +#define RX_DESC_PKT_LEN(word) ((uint32_t) (word) & 0xffff) + +typedef struct EMCModule { + int rx_irq; + int tx_irq; + uint64_t base_addr; +} EMCModule; + +typedef struct TestData { + const EMCModule *module; +} TestData; + +static const EMCModule emc_module_list[] = { + { + .rx_irq = 15, + .tx_irq = 16, + .base_addr = 0xf0825000 + }, + { + .rx_irq = 114, + .tx_irq = 115, + .base_addr = 0xf0826000 + } +}; + +/* Returns the index of the EMC module. */ +static int emc_module_index(const EMCModule *mod) +{ + ptrdiff_t diff = mod - emc_module_list; + + g_assert_true(diff >= 0 && diff < ARRAY_SIZE(emc_module_list)); + + return diff; +} + +static void packet_test_clear(void *sockets) +{ + int *test_sockets = sockets; + + close(test_sockets[0]); + g_free(test_sockets); +} + +static int *packet_test_init(int module_num, GString *cmd_line) +{ + int *test_sockets = g_new(int, 2); + int ret = socketpair(PF_UNIX, SOCK_STREAM, 0, test_sockets); + g_assert_cmpint(ret, != , -1); + + /* + * KISS and use -nic. We specify two nics (both emc{0,1}) because there's + * currently no way to specify only emc1: The driver implicitly relies on + * emc[i] == nd_table[i]. + */ + if (module_num == 0) { + g_string_append_printf(cmd_line, + " -nic socket,fd=%d,model=" TYPE_NPCM7XX_EMC " " + " -nic user,model=" TYPE_NPCM7XX_EMC " ", + test_sockets[1]); + } else { + g_string_append_printf(cmd_line, + " -nic user,model=" TYPE_NPCM7XX_EMC " " + " -nic socket,fd=%d,model=" TYPE_NPCM7XX_EMC " ", + test_sockets[1]); + } + + g_test_queue_destroy(packet_test_clear, test_sockets); + return test_sockets; +} + +static uint32_t emc_read(QTestState *qts, const EMCModule *mod, + NPCM7xxPWMRegister regno) +{ + return qtest_readl(qts, mod->base_addr + regno * sizeof(uint32_t)); +} + +static void emc_write(QTestState *qts, const EMCModule *mod, + NPCM7xxPWMRegister regno, uint32_t value) +{ + qtest_writel(qts, mod->base_addr + regno * sizeof(uint32_t), value); +} + +static void emc_read_tx_desc(QTestState *qts, uint32_t addr, + NPCM7xxEMCTxDesc *desc) +{ + qtest_memread(qts, addr, desc, sizeof(*desc)); + desc->flags = le32_to_cpu(desc->flags); + desc->txbsa = le32_to_cpu(desc->txbsa); + desc->status_and_length = le32_to_cpu(desc->status_and_length); + desc->ntxdsa = le32_to_cpu(desc->ntxdsa); +} + +static void emc_write_tx_desc(QTestState *qts, const NPCM7xxEMCTxDesc *desc, + uint32_t addr) +{ + NPCM7xxEMCTxDesc le_desc; + + le_desc.flags = cpu_to_le32(desc->flags); + le_desc.txbsa = cpu_to_le32(desc->txbsa); + le_desc.status_and_length = cpu_to_le32(desc->status_and_length); + le_desc.ntxdsa = cpu_to_le32(desc->ntxdsa); + qtest_memwrite(qts, addr, &le_desc, sizeof(le_desc)); +} + +static void emc_read_rx_desc(QTestState *qts, uint32_t addr, + NPCM7xxEMCRxDesc *desc) +{ + qtest_memread(qts, addr, desc, sizeof(*desc)); + desc->status_and_length = le32_to_cpu(desc->status_and_length); + desc->rxbsa = le32_to_cpu(desc->rxbsa); + desc->reserved = le32_to_cpu(desc->reserved); + desc->nrxdsa = le32_to_cpu(desc->nrxdsa); +} + +static void emc_write_rx_desc(QTestState *qts, const NPCM7xxEMCRxDesc *desc, + uint32_t addr) +{ + NPCM7xxEMCRxDesc le_desc; + + le_desc.status_and_length = cpu_to_le32(desc->status_and_length); + le_desc.rxbsa = cpu_to_le32(desc->rxbsa); + le_desc.reserved = cpu_to_le32(desc->reserved); + le_desc.nrxdsa = cpu_to_le32(desc->nrxdsa); + qtest_memwrite(qts, addr, &le_desc, sizeof(le_desc)); +} + +/* + * Reset the EMC module. + * The module must be reset before, e.g., TXDLSA,RXDLSA are changed. + */ +static bool emc_soft_reset(QTestState *qts, const EMCModule *mod) +{ + uint32_t val; + uint64_t end_time; + + emc_write(qts, mod, REG_MCMDR, REG_MCMDR_SWR); + + /* + * Wait for device to reset as the linux driver does. + * During reset the AHB reads 0 for all registers. So first wait for + * something that resets to non-zero, and then wait for SWR becoming 0. + */ + end_time = g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; + + do { + qtest_clock_step(qts, 100); + val = emc_read(qts, mod, REG_FFTCR); + } while (val == 0 && g_get_monotonic_time() < end_time); + if (val != 0) { + do { + qtest_clock_step(qts, 100); + val = emc_read(qts, mod, REG_MCMDR); + if ((val & REG_MCMDR_SWR) == 0) { + /* + * N.B. The CAMs have been reset here, so macaddr matching of + * incoming packets will not work. + */ + return true; + } + } while (g_get_monotonic_time() < end_time); + } + + g_message("%s: Timeout expired", __func__); + return false; +} + +/* Check emc registers are reset to default value. */ +static void test_init(gconstpointer test_data) +{ + const TestData *td = test_data; + const EMCModule *mod = td->module; + QTestState *qts = qtest_init("-machine quanta-gsj"); + int i; + +#define CHECK_REG(regno, value) \ + do { \ + g_assert_cmphex(emc_read(qts, mod, (regno)), ==, (value)); \ + } while (0) + + CHECK_REG(REG_CAMCMR, 0); + CHECK_REG(REG_CAMEN, 0); + CHECK_REG(REG_TXDLSA, 0xfffffffc); + CHECK_REG(REG_RXDLSA, 0xfffffffc); + CHECK_REG(REG_MCMDR, 0); + CHECK_REG(REG_MIID, 0); + CHECK_REG(REG_MIIDA, 0x00900000); + CHECK_REG(REG_FFTCR, 0x0101); + CHECK_REG(REG_DMARFC, 0x0800); + CHECK_REG(REG_MIEN, 0); + CHECK_REG(REG_MISTA, 0); + CHECK_REG(REG_MGSTA, 0); + CHECK_REG(REG_MPCNT, 0x7fff); + CHECK_REG(REG_MRPC, 0); + CHECK_REG(REG_MRPCC, 0); + CHECK_REG(REG_MREPC, 0); + CHECK_REG(REG_DMARFS, 0); + CHECK_REG(REG_CTXDSA, 0); + CHECK_REG(REG_CTXBSA, 0); + CHECK_REG(REG_CRXDSA, 0); + CHECK_REG(REG_CRXBSA, 0); + +#undef CHECK_REG + + for (i = 0; i < NUM_CAMML_REGS; ++i) { + g_assert_cmpuint(emc_read(qts, mod, REG_CAMM_BASE + i * 2), ==, + 0); + g_assert_cmpuint(emc_read(qts, mod, REG_CAML_BASE + i * 2), ==, + 0); + } + + qtest_quit(qts); +} + +static bool emc_wait_irq(QTestState *qts, const EMCModule *mod, int step, + bool is_tx) +{ + uint64_t end_time = + g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; + + do { + if (qtest_get_irq(qts, is_tx ? mod->tx_irq : mod->rx_irq)) { + return true; + } + qtest_clock_step(qts, step); + } while (g_get_monotonic_time() < end_time); + + g_message("%s: Timeout expired", __func__); + return false; +} + +static bool emc_wait_mista(QTestState *qts, const EMCModule *mod, int step, + uint32_t flag) +{ + uint64_t end_time = + g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; + + do { + uint32_t mista = emc_read(qts, mod, REG_MISTA); + if (mista & flag) { + return true; + } + qtest_clock_step(qts, step); + } while (g_get_monotonic_time() < end_time); + + g_message("%s: Timeout expired", __func__); + return false; +} + +static bool wait_socket_readable(int fd) +{ + fd_set read_fds; + struct timeval tv; + int rv; + + FD_ZERO(&read_fds); + FD_SET(fd, &read_fds); + tv.tv_sec = TIMEOUT_SECONDS; + tv.tv_usec = 0; + rv = select(fd + 1, &read_fds, NULL, NULL, &tv); + if (rv == -1) { + perror("select"); + } else if (rv == 0) { + g_message("%s: Timeout expired", __func__); + } + return rv == 1; +} + +/* Initialize *desc (in host endian format). */ +static void init_tx_desc(NPCM7xxEMCTxDesc *desc, size_t count, + uint32_t desc_addr) +{ + g_assert(count >= 2); + memset(&desc[0], 0, sizeof(*desc) * count); + /* Leave the last one alone, owned by the cpu -> stops transmission. */ + for (size_t i = 0; i < count - 1; ++i) { + desc[i].flags = + (TX_DESC_FLAG_OWNER_MASK | /* owner = 1: emc */ + TX_DESC_FLAG_INTEN | + 0 | /* crc append = 0 */ + 0 /* padding enable = 0 */); + desc[i].status_and_length = + (0 | /* collision count = 0 */ + 0 | /* SQE = 0 */ + 0 | /* PAU = 0 */ + 0 | /* TXHA = 0 */ + 0 | /* LC = 0 */ + 0 | /* TXABT = 0 */ + 0 | /* NCS = 0 */ + 0 | /* EXDEF = 0 */ + 0 | /* TXCP = 0 */ + 0 | /* DEF = 0 */ + 0 | /* TXINTR = 0 */ + 0 /* length filled in later */); + desc[i].ntxdsa = desc_addr + (i + 1) * sizeof(*desc); + } +} + +static void enable_tx(QTestState *qts, const EMCModule *mod, + const NPCM7xxEMCTxDesc *desc, size_t count, + uint32_t desc_addr, uint32_t mien_flags) +{ + /* Write the descriptors to guest memory. */ + for (size_t i = 0; i < count; ++i) { + emc_write_tx_desc(qts, desc + i, desc_addr + i * sizeof(*desc)); + } + + /* Trigger sending the packet. */ + /* The module must be reset before changing TXDLSA. */ + g_assert(emc_soft_reset(qts, mod)); + emc_write(qts, mod, REG_TXDLSA, desc_addr); + emc_write(qts, mod, REG_CTXDSA, ~0); + emc_write(qts, mod, REG_MIEN, REG_MIEN_ENTXCP | mien_flags); + { + uint32_t mcmdr = emc_read(qts, mod, REG_MCMDR); + mcmdr |= REG_MCMDR_TXON; + emc_write(qts, mod, REG_MCMDR, mcmdr); + } + + /* Prod the device to send the packet. */ + emc_write(qts, mod, REG_TSDR, 1); +} + +static void emc_send_verify1(QTestState *qts, const EMCModule *mod, int fd, + bool with_irq, uint32_t desc_addr, + uint32_t next_desc_addr, + const char *test_data, int test_size) +{ + NPCM7xxEMCTxDesc result_desc; + uint32_t expected_mask, expected_value, recv_len; + int ret; + char buffer[TX_DATA_LEN]; + + g_assert(wait_socket_readable(fd)); + + /* Read the descriptor back. */ + emc_read_tx_desc(qts, desc_addr, &result_desc); + /* Descriptor should be owned by cpu now. */ + g_assert((result_desc.flags & TX_DESC_FLAG_OWNER_MASK) == 0); + /* Test the status bits, ignoring the length field. */ + expected_mask = 0xffff << 16; + expected_value = TX_DESC_STATUS_TXCP; + if (with_irq) { + expected_value |= TX_DESC_STATUS_TXINTR; + } + g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, + expected_value); + + /* Check data sent to the backend. */ + recv_len = ~0; + ret = qemu_recv(fd, &recv_len, sizeof(recv_len), MSG_DONTWAIT); + g_assert_cmpint(ret, == , sizeof(recv_len)); + + g_assert(wait_socket_readable(fd)); + memset(buffer, 0xff, sizeof(buffer)); + ret = qemu_recv(fd, buffer, test_size, MSG_DONTWAIT); + g_assert_cmpmem(buffer, ret, test_data, test_size); +} + +static void emc_send_verify(QTestState *qts, const EMCModule *mod, int fd, + bool with_irq) +{ + NPCM7xxEMCTxDesc desc[NUM_TX_DESCRIPTORS]; + uint32_t desc_addr = DESC_ADDR; + static const char test1_data[] = "TEST1"; + static const char test2_data[] = "Testing 1 2 3 ..."; + uint32_t data1_addr = DATA_ADDR; + uint32_t data2_addr = data1_addr + sizeof(test1_data); + bool got_tdu; + uint32_t end_desc_addr; + + /* Prepare test data buffer. */ + qtest_memwrite(qts, data1_addr, test1_data, sizeof(test1_data)); + qtest_memwrite(qts, data2_addr, test2_data, sizeof(test2_data)); + + init_tx_desc(&desc[0], NUM_TX_DESCRIPTORS, desc_addr); + desc[0].txbsa = data1_addr; + desc[0].status_and_length |= sizeof(test1_data); + desc[1].txbsa = data2_addr; + desc[1].status_and_length |= sizeof(test2_data); + + enable_tx(qts, mod, &desc[0], NUM_TX_DESCRIPTORS, desc_addr, + with_irq ? REG_MIEN_ENTXINTR : 0); + + /* + * It's problematic to observe the interrupt for each packet. + * Instead just wait until all the packets go out. + */ + got_tdu = false; + while (!got_tdu) { + if (with_irq) { + g_assert_true(emc_wait_irq(qts, mod, TX_STEP_COUNT, + /*is_tx=*/true)); + } else { + g_assert_true(emc_wait_mista(qts, mod, TX_STEP_COUNT, + REG_MISTA_TXINTR)); + } + got_tdu = !!(emc_read(qts, mod, REG_MISTA) & REG_MISTA_TDU); + /* If we don't have TDU yet, reset the interrupt. */ + if (!got_tdu) { + emc_write(qts, mod, REG_MISTA, + emc_read(qts, mod, REG_MISTA) & 0xffff0000); + } + } + + end_desc_addr = desc_addr + 2 * sizeof(desc[0]); + g_assert_cmphex(emc_read(qts, mod, REG_CTXDSA), ==, end_desc_addr); + g_assert_cmphex(emc_read(qts, mod, REG_MISTA), ==, + REG_MISTA_TXCP | REG_MISTA_TXINTR | REG_MISTA_TDU); + + emc_send_verify1(qts, mod, fd, with_irq, + desc_addr, end_desc_addr, + test1_data, sizeof(test1_data)); + emc_send_verify1(qts, mod, fd, with_irq, + desc_addr + sizeof(desc[0]), end_desc_addr, + test2_data, sizeof(test2_data)); +} + +/* Initialize *desc (in host endian format). */ +static void init_rx_desc(NPCM7xxEMCRxDesc *desc, size_t count, + uint32_t desc_addr, uint32_t data_addr) +{ + g_assert_true(count >= 2); + memset(desc, 0, sizeof(*desc) * count); + desc[0].rxbsa = data_addr; + desc[0].status_and_length = + (0b10 << RX_DESC_STATUS_OWNER_SHIFT | /* owner = 10: emc */ + 0 | /* RP = 0 */ + 0 | /* ALIE = 0 */ + 0 | /* RXGD = 0 */ + 0 | /* PTLE = 0 */ + 0 | /* CRCE = 0 */ + 0 | /* RXINTR = 0 */ + 0 /* length (filled in later) */); + /* Leave the last one alone, owned by the cpu -> stops transmission. */ + desc[0].nrxdsa = desc_addr + sizeof(*desc); +} + +static void enable_rx(QTestState *qts, const EMCModule *mod, + const NPCM7xxEMCRxDesc *desc, size_t count, + uint32_t desc_addr, uint32_t mien_flags, + uint32_t mcmdr_flags) +{ + /* + * Write the descriptor to guest memory. + * FWIW, IWBN if the docs said the buffer needs to be at least DMARFC + * bytes. + */ + for (size_t i = 0; i < count; ++i) { + emc_write_rx_desc(qts, desc + i, desc_addr + i * sizeof(*desc)); + } + + /* Trigger receiving the packet. */ + /* The module must be reset before changing RXDLSA. */ + g_assert(emc_soft_reset(qts, mod)); + emc_write(qts, mod, REG_RXDLSA, desc_addr); + emc_write(qts, mod, REG_MIEN, REG_MIEN_ENRXGD | mien_flags); + + /* + * We don't know what the device's macaddr is, so just accept all + * unicast packets (AUP). + */ + emc_write(qts, mod, REG_CAMCMR, REG_CAMCMR_AUP); + emc_write(qts, mod, REG_CAMEN, 1 << 0); + { + uint32_t mcmdr = emc_read(qts, mod, REG_MCMDR); + mcmdr |= REG_MCMDR_RXON | mcmdr_flags; + emc_write(qts, mod, REG_MCMDR, mcmdr); + } + + /* Prod the device to accept a packet. */ + emc_write(qts, mod, REG_RSDR, 1); +} + +static void emc_recv_verify(QTestState *qts, const EMCModule *mod, int fd, + bool with_irq) +{ + NPCM7xxEMCRxDesc desc[NUM_RX_DESCRIPTORS]; + uint32_t desc_addr = DESC_ADDR; + uint32_t data_addr = DATA_ADDR; + int ret; + uint32_t expected_mask, expected_value; + NPCM7xxEMCRxDesc result_desc; + + /* Prepare test data buffer. */ + const char test[RX_DATA_LEN] = "TEST"; + int len = htonl(sizeof(test)); + const struct iovec iov[] = { + { + .iov_base = &len, + .iov_len = sizeof(len), + },{ + .iov_base = (char *) test, + .iov_len = sizeof(test), + }, + }; + + /* + * Reset the device BEFORE sending a test packet, otherwise the packet + * may get swallowed by an active device of an earlier test. + */ + init_rx_desc(&desc[0], NUM_RX_DESCRIPTORS, desc_addr, data_addr); + enable_rx(qts, mod, &desc[0], NUM_RX_DESCRIPTORS, desc_addr, + with_irq ? REG_MIEN_ENRXINTR : 0, 0); + + /* Send test packet to device's socket. */ + ret = iov_send(fd, iov, 2, 0, sizeof(len) + sizeof(test)); + g_assert_cmpint(ret, == , sizeof(test) + sizeof(len)); + + /* Wait for RX interrupt. */ + if (with_irq) { + g_assert_true(emc_wait_irq(qts, mod, RX_STEP_COUNT, /*is_tx=*/false)); + } else { + g_assert_true(emc_wait_mista(qts, mod, RX_STEP_COUNT, REG_MISTA_RXGD)); + } + + g_assert_cmphex(emc_read(qts, mod, REG_CRXDSA), ==, + desc_addr + sizeof(desc[0])); + + expected_mask = 0xffff; + expected_value = (REG_MISTA_DENI | + REG_MISTA_RXGD | + REG_MISTA_RXINTR); + g_assert_cmphex((emc_read(qts, mod, REG_MISTA) & expected_mask), + ==, expected_value); + + /* Read the descriptor back. */ + emc_read_rx_desc(qts, desc_addr, &result_desc); + /* Descriptor should be owned by cpu now. */ + g_assert((result_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK) == 0); + /* Test the status bits, ignoring the length field. */ + expected_mask = 0xffff << 16; + expected_value = RX_DESC_STATUS_RXGD; + if (with_irq) { + expected_value |= RX_DESC_STATUS_RXINTR; + } + g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, + expected_value); + g_assert_cmpint(RX_DESC_PKT_LEN(result_desc.status_and_length), ==, + RX_DATA_LEN + CRC_LENGTH); + + { + char buffer[RX_DATA_LEN]; + qtest_memread(qts, data_addr, buffer, sizeof(buffer)); + g_assert_cmpstr(buffer, == , "TEST"); + } +} + +static void emc_test_ptle(QTestState *qts, const EMCModule *mod, int fd) +{ + NPCM7xxEMCRxDesc desc[NUM_RX_DESCRIPTORS]; + uint32_t desc_addr = DESC_ADDR; + uint32_t data_addr = DATA_ADDR; + int ret; + NPCM7xxEMCRxDesc result_desc; + uint32_t expected_mask, expected_value; + + /* Prepare test data buffer. */ +#define PTLE_DATA_LEN 1600 + char test_data[PTLE_DATA_LEN]; + int len = htonl(sizeof(test_data)); + const struct iovec iov[] = { + { + .iov_base = &len, + .iov_len = sizeof(len), + },{ + .iov_base = (char *) test_data, + .iov_len = sizeof(test_data), + }, + }; + memset(test_data, 42, sizeof(test_data)); + + /* + * Reset the device BEFORE sending a test packet, otherwise the packet + * may get swallowed by an active device of an earlier test. + */ + init_rx_desc(&desc[0], NUM_RX_DESCRIPTORS, desc_addr, data_addr); + enable_rx(qts, mod, &desc[0], NUM_RX_DESCRIPTORS, desc_addr, + REG_MIEN_ENRXINTR, REG_MCMDR_ALP); + + /* Send test packet to device's socket. */ + ret = iov_send(fd, iov, 2, 0, sizeof(len) + sizeof(test_data)); + g_assert_cmpint(ret, == , sizeof(test_data) + sizeof(len)); + + /* Wait for RX interrupt. */ + g_assert_true(emc_wait_irq(qts, mod, RX_STEP_COUNT, /*is_tx=*/false)); + + /* Read the descriptor back. */ + emc_read_rx_desc(qts, desc_addr, &result_desc); + /* Descriptor should be owned by cpu now. */ + g_assert((result_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK) == 0); + /* Test the status bits, ignoring the length field. */ + expected_mask = 0xffff << 16; + expected_value = (RX_DESC_STATUS_RXGD | + RX_DESC_STATUS_PTLE | + RX_DESC_STATUS_RXINTR); + g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, + expected_value); + g_assert_cmpint(RX_DESC_PKT_LEN(result_desc.status_and_length), ==, + PTLE_DATA_LEN + CRC_LENGTH); + + { + char buffer[PTLE_DATA_LEN]; + qtest_memread(qts, data_addr, buffer, sizeof(buffer)); + g_assert(memcmp(buffer, test_data, PTLE_DATA_LEN) == 0); + } +} + +static void test_tx(gconstpointer test_data) +{ + const TestData *td = test_data; + GString *cmd_line = g_string_new("-machine quanta-gsj"); + int *test_sockets = packet_test_init(emc_module_index(td->module), + cmd_line); + QTestState *qts = qtest_init(cmd_line->str); + + /* + * TODO: For pedantic correctness test_sockets[0] should be closed after + * the fork and before the exec, but that will require some harness + * improvements. + */ + close(test_sockets[1]); + /* Defensive programming */ + test_sockets[1] = -1; + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + emc_send_verify(qts, td->module, test_sockets[0], /*with_irq=*/false); + emc_send_verify(qts, td->module, test_sockets[0], /*with_irq=*/true); + + qtest_quit(qts); +} + +static void test_rx(gconstpointer test_data) +{ + const TestData *td = test_data; + GString *cmd_line = g_string_new("-machine quanta-gsj"); + int *test_sockets = packet_test_init(emc_module_index(td->module), + cmd_line); + QTestState *qts = qtest_init(cmd_line->str); + + /* + * TODO: For pedantic correctness test_sockets[0] should be closed after + * the fork and before the exec, but that will require some harness + * improvements. + */ + close(test_sockets[1]); + /* Defensive programming */ + test_sockets[1] = -1; + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/false); + emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/true); + emc_test_ptle(qts, td->module, test_sockets[0]); + + qtest_quit(qts); +} + +static void emc_add_test(const char *name, const TestData* td, + GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf( + "npcm7xx_emc/emc[%d]/%s", emc_module_index(td->module), name); + qtest_add_data_func(full_name, td, fn); +} +#define add_test(name, td) emc_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + TestData test_data_list[ARRAY_SIZE(emc_module_list)]; + + g_test_init(&argc, &argv, NULL); + + for (int i = 0; i < ARRAY_SIZE(emc_module_list); ++i) { + TestData *td = &test_data_list[i]; + + td->module = &emc_module_list[i]; + + add_test(init, td); + add_test(tx, td); + add_test(rx, td); + } + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ qtests_npcm7xx = \ ['npcm7xx_adc-test', + 'npcm7xx_emc-test', 'npcm7xx_gpio-test', 'npcm7xx_pwm-test', 'npcm7xx_rng-test', -- 2.20.1