The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 Another arm pullreq; nothing particularly exciting here. -- PMM The following changes since commit e27d5b488ef08408691bfed61f34ee2858136287: Merge remote-tracking branch 'remotes/juanquintela/tags/pull-migration-pull-request' into staging (2020-02-28 14:02:31 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200228 for you to fetch changes up to 1904f9b5f1d94fe12fe021db6b504c87d684f6db: hw/intc/arm_gic_kvm: Don't assume kernel can provide a GICv2 (2020-02-28 16:14:57 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm: Use TYPE_PL011 to create serial port * target/arm: Set ID_MMFR4.HPDS for aarch64_max_initfn * hw/arm/integratorcp: Map the audio codec controller * GICv2: Correctly implement the limited number of priority bits * target/arm: refactoring of VFP related feature checks and decode * xilinx_zynq: Fix USB port instantiation * acceptance tests for n800, n810, integratorcp * Implement v8.3-RCPC, v8.4-RCPC, v8.3-CCIDX * arm_gic_kvm: Don't assume kernel can provide a GICv2 (provide better error message for user error) ---------------------------------------------------------------- Gavin Shan (1): hw/arm: Use TYPE_PL011 to create serial port Guenter Roeck (2): hw/arm/xilinx_zynq: Fix USB port instantiation hw/usb/hcd-ehci-sysbus: Remove obsolete xlnx, ps7-usb class Peter Maydell (5): target/arm: Fix wrong use of FIELD_EX32 on ID_AA64DFR0 target/arm: Implement v8.3-RCPC target/arm: Implement v8.4-RCPC target/arm: Implement ARMv8.3-CCIDX hw/intc/arm_gic_kvm: Don't assume kernel can provide a GICv2 Philippe Mathieu-Daudé (3): hw/arm/integratorcp: Map the audio codec controller tests/acceptance: Extract boot_integratorcp() from test_integratorcp() tests/acceptance/integratorcp: Verify Tux is displayed on framebuffer Richard Henderson (17): target/arm: Set ID_MMFR4.HPDS for aarch64_max_initfn target/arm: Add isar_feature_aa32_vfp_simd target/arm: Rename isar_feature_aa32_fpdp_v2 target/arm: Add isar_feature_aa32_{fpsp_v2, fpsp_v3, fpdp_v3} target/arm: Add isar_feature_aa64_fp_simd, isar_feature_aa32_vfp target/arm: Perform fpdp_v2 check first target/arm: Replace ARM_FEATURE_VFP3 checks with fp{sp, dp}_v3 target/arm: Add missing checks for fpsp_v2 target/arm: Replace ARM_FEATURE_VFP4 with isar_feature_aa32_simdfmac target/arm: Remove ARM_FEATURE_VFP check from disas_vfp_insn target/arm: Move VLLDM and VLSTM to vfp.decode target/arm: Move the vfp decodetree calls next to the base isa linux-user/arm: Replace ARM_FEATURE_VFP* tests for HWCAP target/arm: Remove ARM_FEATURE_VFP* target/arm: Add formats for some vfp 2 and 3-register insns target/arm: Split VFM decode target/arm: Split VMINMAXNM decode Sai Pavan Boddu (3): arm_gic: Mask the un-supported priority bits cpu/a9mpcore: Set number of GIC priority bits to 5 cpu/arm11mpcore: Set number of GIC priority bits to 4 Thomas Huth (2): tests/acceptance: Add a test for the N800 and N810 arm machines tests/acceptance: Add a test for the integratorcp arm machine include/hw/intc/arm_gic.h | 2 + include/hw/intc/arm_gic_common.h | 1 + target/arm/cpu.h | 88 +++++- hw/arm/integratorcp.c | 1 + hw/arm/sbsa-ref.c | 3 +- hw/arm/virt.c | 3 +- hw/arm/xilinx_zynq.c | 5 +- hw/arm/xlnx-versal.c | 3 +- hw/cpu/a9mpcore.c | 4 + hw/cpu/arm11mpcore.c | 5 + hw/intc/arm_gic.c | 33 +- hw/intc/arm_gic_common.c | 1 + hw/intc/arm_gic_kvm.c | 9 + hw/intc/armv7m_nvic.c | 20 +- hw/usb/hcd-ehci-sysbus.c | 17 - linux-user/arm/signal.c | 4 +- linux-user/elfload.c | 25 +- target/arm/arch_dump.c | 11 +- target/arm/cpu.c | 44 +-- target/arm/cpu64.c | 5 +- target/arm/helper.c | 23 +- target/arm/kvm32.c | 5 - target/arm/kvm64.c | 1 - target/arm/m_helper.c | 11 +- target/arm/machine.c | 5 +- target/arm/translate-a64.c | 114 +++++++ target/arm/translate-vfp.inc.c | 448 +++++++++++++++++---------- target/arm/translate.c | 122 ++------ MAINTAINERS | 2 + hw/arm/Kconfig | 1 + target/arm/vfp-uncond.decode | 12 +- target/arm/vfp.decode | 153 ++++----- tests/acceptance/machine_arm_integratorcp.py | 99 ++++++ tests/acceptance/machine_arm_n8x0.py | 49 +++ 34 files changed, 865 insertions(+), 464 deletions(-) create mode 100644 tests/acceptance/machine_arm_integratorcp.py create mode 100644 tests/acceptance/machine_arm_n8x0.py From: Gavin Shan <gshan@redhat.com> This uses TYPE_PL011 when creating the serial port so that the code looks cleaner. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200224222223.4128-1-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 3 ++- hw/arm/virt.c | 3 ++- hw/arm/xlnx-versal.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/gpex.h" #include "hw/qdev-properties.h" #include "hw/usb.h" +#include "hw/char/pl011.h" #include "net/net.h" #define RAMLIMIT_GB 8192 @@ -XXX,XX +XXX,XX @@ static void create_uart(const SBSAMachineState *sms, int uart, { hwaddr base = sbsa_ref_memmap[uart].base; int irq = sbsa_ref_irqmap[uart]; - DeviceState *dev = qdev_create(NULL, "pl011"); + DeviceState *dev = qdev_create(NULL, TYPE_PL011); SysBusDevice *s = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", chr); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "hw/mem/nvdimm.h" #include "hw/acpi/generic_event_device.h" #include "hw/virtio/virtio-iommu.h" +#include "hw/char/pl011.h" #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \ static void virt_##major##_##minor##_class_init(ObjectClass *oc, \ @@ -XXX,XX +XXX,XX @@ static void create_uart(const VirtMachineState *vms, int uart, int irq = vms->irqmap[uart]; const char compat[] = "arm,pl011\0arm,primecell"; const char clocknames[] = "uartclk\0apb_pclk"; - DeviceState *dev = qdev_create(NULL, "pl011"); + DeviceState *dev = qdev_create(NULL, TYPE_PL011); SysBusDevice *s = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", chr); diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/unimp.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/arm/xlnx-versal.h" +#include "hw/char/pl011.h" #define XLNX_VERSAL_ACPU_TYPE ARM_CPU_TYPE_NAME("cortex-a72") #define GEM_REVISION 0x40070106 @@ -XXX,XX +XXX,XX @@ static void versal_create_uarts(Versal *s, qemu_irq *pic) DeviceState *dev; MemoryRegion *mr; - dev = qdev_create(NULL, "pl011"); + dev = qdev_create(NULL, TYPE_PL011); s->lpd.iou.uart[i] = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(i)); object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We had set this for aarch32-only in arm_max_initfn, but failed to set the same bit for aarch64. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200218190958.745-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_mmfr3 = u; u = cpu->isar.id_mmfr4; + u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ cpu->isar.id_mmfr4 = u; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Linux kernel displays errors why trying to detect the PL041 audio interface: Linux version 4.16.0 (linus@genomnajs) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #142 PREEMPT Wed May 9 13:24:55 CEST 2018 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 CPU: VIVT data cache, VIVT instruction cache OF: fdt: Machine model: ARM Integrator/CP ... OF: amba_device_add() failed (-19) for /fpga/aaci@1d000000 Since we have it already modelled, simply plug it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200223233033.15371-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 1 + hw/arm/Kconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ static void integratorcp_init(MachineState *machine) qdev_get_gpio_in_named(icp, ICP_GPIO_MMC_WPROT, 0)); qdev_connect_gpio_out(dev, 1, qdev_get_gpio_in_named(icp, ICP_GPIO_MMC_CARDIN, 0)); + sysbus_create_varargs("pl041", 0x1d000000, pic[25], NULL); if (nd_table[0].used) smc91c111_init(&nd_table[0], 0xc8000000, pic[27]); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config INTEGRATOR select INTEGRATOR_DEBUG select PL011 # UART select PL031 # RTC + select PL041 # audio select PL050 # keyboard/mouse select PL110 # pl111 LCD controller select PL181 # display -- 2.20.1 From: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> The GICv2 allows the implementation to implement a variable number of priority bits; unimplemented bits in the priority registers are read as zeros, writes ignored. We were previously always implementing a full 8 bits of priority, which is allowed but not what the real hardware typically does (which is usually to have 4 or 5 bits of priority). Add a new device property to allow the number of implemented property bits to be specified. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-id: 1582537164-764-2-git-send-email-sai.pavan.boddu@xilinx.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: improved commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gic.h | 2 ++ include/hw/intc/arm_gic_common.h | 1 + hw/intc/arm_gic.c | 33 ++++++++++++++++++++++++++++++-- hw/intc/arm_gic_common.c | 1 + 4 files changed, 35 insertions(+), 2 deletions(-) diff --git a/include/hw/intc/arm_gic.h b/include/hw/intc/arm_gic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gic.h +++ b/include/hw/intc/arm_gic.h @@ -XXX,XX +XXX,XX @@ /* Number of SGI target-list bits */ #define GIC_TARGETLIST_BITS 8 +#define GIC_MAX_PRIORITY_BITS 8 +#define GIC_MIN_PRIORITY_BITS 4 #define TYPE_ARM_GIC "arm_gic" #define ARM_GIC(obj) \ diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gic_common.h +++ b/include/hw/intc/arm_gic_common.h @@ -XXX,XX +XXX,XX @@ typedef struct GICState { uint16_t priority_mask[GIC_NCPU_VCPU]; uint16_t running_priority[GIC_NCPU_VCPU]; uint16_t current_pending[GIC_NCPU_VCPU]; + uint32_t n_prio_bits; /* If we present the GICv2 without security extensions to a guest, * the guest can configure the GICC_CTLR to configure group 1 binary point diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) return ret; } +static uint32_t gic_fullprio_mask(GICState *s, int cpu) +{ + /* + * Return a mask word which clears the unimplemented priority + * bits from a priority value for an interrupt. (Not to be + * confused with the group priority, whose mask depends on BPR.) + */ + int priBits; + + if (gic_is_vcpu(cpu)) { + priBits = GIC_VIRT_MAX_GROUP_PRIO_BITS; + } else { + priBits = s->n_prio_bits; + } + return ~0U << (8 - priBits); +} + void gic_dist_set_priority(GICState *s, int cpu, int irq, uint8_t val, MemTxAttrs attrs) { @@ -XXX,XX +XXX,XX @@ void gic_dist_set_priority(GICState *s, int cpu, int irq, uint8_t val, val = 0x80 | (val >> 1); /* Non-secure view */ } + val &= gic_fullprio_mask(s, cpu); + if (irq < GIC_INTERNAL) { s->priority1[irq][cpu] = val; } else { @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_get_priority(GICState *s, int cpu, int irq, } prio = (prio << 1) & 0xff; /* Non-secure view */ } - return prio; + return prio & gic_fullprio_mask(s, cpu); } static void gic_set_priority_mask(GICState *s, int cpu, uint8_t pmask, @@ -XXX,XX +XXX,XX @@ static void gic_set_priority_mask(GICState *s, int cpu, uint8_t pmask, return; } } - s->priority_mask[cpu] = pmask; + s->priority_mask[cpu] = pmask & gic_fullprio_mask(s, cpu); } static uint32_t gic_get_priority_mask(GICState *s, int cpu, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ static void arm_gic_realize(DeviceState *dev, Error **errp) return; } + if (s->n_prio_bits > GIC_MAX_PRIORITY_BITS || + (s->virt_extn ? s->n_prio_bits < GIC_VIRT_MAX_GROUP_PRIO_BITS : + s->n_prio_bits < GIC_MIN_PRIORITY_BITS)) { + error_setg(errp, "num-priority-bits cannot be greater than %d" + " or less than %d", GIC_MAX_PRIORITY_BITS, + s->virt_extn ? GIC_VIRT_MAX_GROUP_PRIO_BITS : + GIC_MIN_PRIORITY_BITS); + return; + } + /* This creates distributor, main CPU interface (s->cpuiomem[0]) and if * enabled, virtualization extensions related interfaces (main virtual * interface (s->vifaceiomem[0]) and virtual CPU interface). diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_common.c +++ b/hw/intc/arm_gic_common.c @@ -XXX,XX +XXX,XX @@ static Property arm_gic_common_properties[] = { DEFINE_PROP_BOOL("has-security-extensions", GICState, security_extn, 0), /* True if the GIC should implement the virtualization extensions */ DEFINE_PROP_BOOL("has-virtualization-extensions", GICState, virt_extn, 0), + DEFINE_PROP_UINT32("num-priority-bits", GICState, n_prio_bits, 8), DEFINE_PROP_END_OF_LIST(), }; -- 2.20.1 From: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> All A9 CPUs have a GIC with 5 bits of priority. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1582537164-764-3-git-send-email-sai.pavan.boddu@xilinx.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/cpu/a9mpcore.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/cpu/a9mpcore.c b/hw/cpu/a9mpcore.c index XXXXXXX..XXXXXXX 100644 --- a/hw/cpu/a9mpcore.c +++ b/hw/cpu/a9mpcore.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/core/cpu.h" +#define A9_GIC_NUM_PRIORITY_BITS 5 + static void a9mp_priv_set_irq(void *opaque, int irq, int level) { A9MPPrivState *s = (A9MPPrivState *)opaque; @@ -XXX,XX +XXX,XX @@ static void a9mp_priv_realize(DeviceState *dev, Error **errp) gicdev = DEVICE(&s->gic); qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu); qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq); + qdev_prop_set_uint32(gicdev, "num-priority-bits", + A9_GIC_NUM_PRIORITY_BITS); /* Make the GIC's TZ support match the CPUs. We assume that * either all the CPUs have TZ, or none do. -- 2.20.1 From: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> The GIC built into the ARM11MPCore is always implemented with 4 priority bits; set the GIC property accordingly. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1582537164-764-4-git-send-email-sai.pavan.boddu@xilinx.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/cpu/arm11mpcore.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/cpu/arm11mpcore.c b/hw/cpu/arm11mpcore.c index XXXXXXX..XXXXXXX 100644 --- a/hw/cpu/arm11mpcore.c +++ b/hw/cpu/arm11mpcore.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" +#define ARM11MPCORE_NUM_GIC_PRIORITY_BITS 4 static void mpcore_priv_set_irq(void *opaque, int irq, int level) { @@ -XXX,XX +XXX,XX @@ static void mpcore_priv_realize(DeviceState *dev, Error **errp) qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu); qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq); + qdev_prop_set_uint32(gicdev, "num-priority-bits", + ARM11MPCORE_NUM_GIC_PRIORITY_BITS); + + object_property_set_bool(OBJECT(&s->gic), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use this in the places that were checking ARM_FEATURE_VFP, and are obviously testing for the existance of the register set as opposed to testing for some particular instruction extension. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 +++++++++ hw/intc/armv7m_nvic.c | 20 ++++++++++---------- linux-user/arm/signal.c | 4 ++-- target/arm/arch_dump.c | 11 ++++++----- target/arm/cpu.c | 4 ++-- target/arm/helper.c | 4 ++-- target/arm/m_helper.c | 11 ++++++----- 7 files changed, 37 insertions(+), 26 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_fp16_arith(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) == 1; } +static inline bool isar_feature_aa32_vfp_simd(const ARMISARegisters *id) +{ + /* + * Return true if either VFP or SIMD is implemented. + * In this case, a minimum of VFP w/ D0-D15. + */ + return FIELD_EX32(id->mvfr0, MVFR0, SIMDREG) > 0; +} + static inline bool isar_feature_aa32_simd_r32(const ARMISARegisters *id) { /* Return true if D16-D31 are implemented */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; case 0xd88: /* CPACR */ - if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (!cpu_isar_feature(aa32_vfp_simd, cpu)) { return 0; } return cpu->env.v7m.cpacr[attrs.secure]; case 0xd8c: /* NSACR */ - if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (!attrs.secure || !cpu_isar_feature(aa32_vfp_simd, cpu)) { return 0; } return cpu->env.v7m.nsacr; @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } return cpu->env.v7m.sfar; case 0xf34: /* FPCCR */ - if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (!cpu_isar_feature(aa32_vfp_simd, cpu)) { return 0; } if (attrs.secure) { @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return value; } case 0xf38: /* FPCAR */ - if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (!cpu_isar_feature(aa32_vfp_simd, cpu)) { return 0; } return cpu->env.v7m.fpcar[attrs.secure]; case 0xf3c: /* FPDSCR */ - if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (!cpu_isar_feature(aa32_vfp_simd, cpu)) { return 0; } return cpu->env.v7m.fpdscr[attrs.secure]; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; case 0xd88: /* CPACR */ - if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, cpu)) { /* We implement only the Floating Point extension's CP10/CP11 */ cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); } break; case 0xd8c: /* NSACR */ - if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (attrs.secure && cpu_isar_feature(aa32_vfp_simd, cpu)) { /* We implement only the Floating Point extension's CP10/CP11 */ cpu->env.v7m.nsacr = value & (3 << 10); } @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, break; } case 0xf34: /* FPCCR */ - if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, cpu)) { /* Not all bits here are banked. */ uint32_t fpccr_s; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; case 0xf38: /* FPCAR */ - if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, cpu)) { value &= ~7; cpu->env.v7m.fpcar[attrs.secure] = value; } break; case 0xf3c: /* FPDSCR */ - if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, cpu)) { value &= 0x07c00000; cpu->env.v7m.fpdscr[attrs.secure] = value; } diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ static void setup_sigframe_v2(struct target_ucontext_v2 *uc, setup_sigcontext(&uc->tuc_mcontext, env, set->sig[0]); /* Save coprocessor signal frame. */ regspace = uc->tuc_regspace; - if (arm_feature(env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env))) { regspace = setup_sigframe_v2_vfp(regspace, env); } if (arm_feature(env, ARM_FEATURE_IWMMXT)) { @@ -XXX,XX +XXX,XX @@ static int do_sigframe_return_v2(CPUARMState *env, /* Restore coprocessor signal frame */ regspace = uc->tuc_regspace; - if (arm_feature(env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env))) { regspace = restore_sigframe_v2_vfp(env, regspace); if (!regspace) { return 1; diff --git a/target/arm/arch_dump.c b/target/arm/arch_dump.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arch_dump.c +++ b/target/arm/arch_dump.c @@ -XXX,XX +XXX,XX @@ int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs, int cpuid, void *opaque) { struct arm_note note; - CPUARMState *env = &ARM_CPU(cs)->env; + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; DumpState *s = opaque; - int ret, i, fpvalid = !!arm_feature(env, ARM_FEATURE_VFP); + int ret, i; + bool fpvalid = cpu_isar_feature(aa32_vfp_simd, cpu); arm_note_init(&note, s, "CORE", 5, NT_PRSTATUS, sizeof(note.prstatus)); @@ -XXX,XX +XXX,XX @@ int cpu_get_dump_info(ArchDumpInfo *info, ssize_t cpu_get_note_size(int class, int machine, int nr_cpus) { ARMCPU *cpu = ARM_CPU(first_cpu); - CPUARMState *env = &cpu->env; size_t note_size; if (class == ELFCLASS64) { @@ -XXX,XX +XXX,XX @@ ssize_t cpu_get_note_size(int class, int machine, int nr_cpus) note_size += AARCH64_PRFPREG_NOTE_SIZE; #ifdef TARGET_AARCH64 if (cpu_isar_feature(aa64_sve, cpu)) { - note_size += AARCH64_SVE_NOTE_SIZE(env); + note_size += AARCH64_SVE_NOTE_SIZE(&cpu->env); } #endif } else { note_size = ARM_PRSTATUS_NOTE_SIZE; - if (arm_feature(env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, cpu)) { note_size += ARM_VFP_NOTE_SIZE; } } diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } - if (arm_feature(env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, cpu)) { env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags) int numvfpregs = 0; if (cpu_isar_feature(aa32_simd_r32, cpu)) { numvfpregs = 32; - } else if (arm_feature(env, ARM_FEATURE_VFP)) { + } else if (cpu_isar_feature(aa32_vfp_simd, cpu)) { numvfpregs = 16; } for (i = 0; i < numvfpregs; i++) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, * ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP. * TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell. */ - if (arm_feature(env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env))) { /* VFP coprocessor: cp10 & cp11 [23:20] */ mask |= (1 << 31) | (1 << 30) | (0xf << 20); @@ -XXX,XX +XXX,XX @@ void arm_cpu_register_gdb_regs_for_features(ARMCPU *cpu) } else if (cpu_isar_feature(aa32_simd_r32, cpu)) { gdb_register_coprocessor(cs, vfp_gdb_get_reg, vfp_gdb_set_reg, 35, "arm-vfp3.xml", 0); - } else if (arm_feature(env, ARM_FEATURE_VFP)) { + } else if (cpu_isar_feature(aa32_vfp_simd, cpu)) { gdb_register_coprocessor(cs, vfp_gdb_get_reg, vfp_gdb_set_reg, 19, "arm-vfp.xml", 0); } diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) */ uint32_t sig = 0xfefa125a; - if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + if (!cpu_isar_feature(aa32_vfp_simd, env_archcpu(env)) + || (lr & R_V7M_EXCRET_FTYPE_MASK)) { sig |= 1; } return sig; @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, if (dotailchain) { /* Sanitize LR FType and PREFIX bits */ - if (!arm_feature(env, ARM_FEATURE_VFP)) { + if (!cpu_isar_feature(aa32_vfp_simd, cpu)) { lr |= R_V7M_EXCRET_FTYPE_MASK; } lr = deposit32(lr, 24, 8, 0xff); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) ftype = excret & R_V7M_EXCRET_FTYPE_MASK; - if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + if (!ftype && !cpu_isar_feature(aa32_vfp_simd, cpu)) { qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " "if FPU not present\n", @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, * RES0 if the FPU is not present, and is stored in the S bank */ - if (arm_feature(env, ARM_FEATURE_VFP) && + if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env)) && extract32(env->v7m.nsacr, 10, 1)) { env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } - if (arm_feature(env, ARM_FEATURE_VFP)) { + if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env))) { /* * SFPA is RAZ/WI from NS or if no FPU. * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The old name, isar_feature_aa32_fpdp, does not reflect that the test includes VFPv2. We will introduce another feature tests for VFPv3. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 4 ++-- target/arm/translate-vfp.inc.c | 40 +++++++++++++++++----------------- 2 files changed, 22 insertions(+), 22 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_fpshvec(const ARMISARegisters *id) return FIELD_EX32(id->mvfr0, MVFR0, FPSHVEC) > 0; } -static inline bool isar_feature_aa32_fpdp(const ARMISARegisters *id) +static inline bool isar_feature_aa32_fpdp_v2(const ARMISARegisters *id) { - /* Return true if CPU supports double precision floating point */ + /* Return true if CPU supports double precision floating point, VFPv2 */ return FIELD_EX32(id->mvfr0, MVFR0, FPDP) > 0; } diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSEL(DisasContext *s, arg_VSEL *a) return false; } - if (dp && !dc_isar_feature(aa32_fpdp, s)) { + if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMINMAXNM(DisasContext *s, arg_VMINMAXNM *a) return false; } - if (dp && !dc_isar_feature(aa32_fpdp, s)) { + if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINT(DisasContext *s, arg_VRINT *a) return false; } - if (dp && !dc_isar_feature(aa32_fpdp, s)) { + if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT(DisasContext *s, arg_VCVT *a) return false; } - if (dp && !dc_isar_feature(aa32_fpdp, s)) { + if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_3op_dp(DisasContext *s, VFPGen3OpDPFn *fn, return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_dp(DisasContext *s, VFPGen2OpDPFn *fn, int vd, int vm) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VFM_dp(DisasContext *s, arg_VFM_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCMP_dp(DisasContext *s, arg_VCMP_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f64_f16(DisasContext *s, arg_VCVT_f64_f16 *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f16_f64(DisasContext *s, arg_VCVT_f16_f64 *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTR_dp(DisasContext *s, arg_VRINTR_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTZ_dp(DisasContext *s, arg_VRINTZ_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTX_dp(DisasContext *s, arg_VRINTX_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_sp(DisasContext *s, arg_VCVT_sp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp(DisasContext *s, arg_VCVT_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_dp(DisasContext *s, arg_VCVT_int_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VJCVT(DisasContext *s, arg_VJCVT *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_dp(DisasContext *s, arg_VCVT_fix_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp_int(DisasContext *s, arg_VCVT_dp_int *a) return false; } - if (!dc_isar_feature(aa32_fpdp, s)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We will shortly use these to test for VFPv2 and VFPv3 in different situations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_fpshvec(const ARMISARegisters *id) return FIELD_EX32(id->mvfr0, MVFR0, FPSHVEC) > 0; } +static inline bool isar_feature_aa32_fpsp_v2(const ARMISARegisters *id) +{ + /* Return true if CPU supports single precision floating point, VFPv2 */ + return FIELD_EX32(id->mvfr0, MVFR0, FPSP) > 0; +} + +static inline bool isar_feature_aa32_fpsp_v3(const ARMISARegisters *id) +{ + /* Return true if CPU supports single precision floating point, VFPv3 */ + return FIELD_EX32(id->mvfr0, MVFR0, FPSP) >= 2; +} + static inline bool isar_feature_aa32_fpdp_v2(const ARMISARegisters *id) { /* Return true if CPU supports double precision floating point, VFPv2 */ return FIELD_EX32(id->mvfr0, MVFR0, FPDP) > 0; } +static inline bool isar_feature_aa32_fpdp_v3(const ARMISARegisters *id) +{ + /* Return true if CPU supports double precision floating point, VFPv3 */ + return FIELD_EX32(id->mvfr0, MVFR0, FPDP) >= 2; +} + /* * We always set the FP and SIMD FP16 fields to indicate identical * levels of support (assuming SIMD is implemented at all), so -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We cannot easily create "any" functions for these, because the ID_AA64PFR0 fields for FP and SIMD signal "enabled" with zero. Which means that an aarch32-only cpu will return incorrect results when testing the aarch64 registers. To use these, we must either have context or additionally test vs ARM_FEATURE_AARCH64. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 11 +++++++++++ target/arm/cpu.c | 9 ++++++--- target/arm/machine.c | 5 +++-- 3 files changed, 20 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_fpdp_v3(const ARMISARegisters *id) return FIELD_EX32(id->mvfr0, MVFR0, FPDP) >= 2; } +static inline bool isar_feature_aa32_vfp(const ARMISARegisters *id) +{ + return isar_feature_aa32_fpsp_v2(id) || isar_feature_aa32_fpdp_v2(id); +} + /* * We always set the FP and SIMD FP16 fields to indicate identical * levels of support (assuming SIMD is implemented at all), so @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_dcpodp(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, DPB) >= 2; } +static inline bool isar_feature_aa64_fp_simd(const ARMISARegisters *id) +{ + /* We always set the AdvSIMD and FP fields identically. */ + return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) != 0xf; +} + static inline bool isar_feature_aa64_fp16(const ARMISARegisters *id) { /* We always set the AdvSIMD and FP fields identically wrt FP16. */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) * KVM does not currently allow us to lie to the guest about its * ID/feature registers, so the guest always sees what the host has. */ - if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) + ? cpu_isar_feature(aa64_fp_simd, cpu) + : cpu_isar_feature(aa32_vfp, cpu)) { cpu->has_vfp = true; if (!kvm_enabled()) { qdev_property_add_static(DEVICE(obj), &arm_cpu_has_vfp_property); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) * We rely on no XScale CPU having VFP so we can use the same bits in the * TB flags field for VECSTRIDE and XSCALE_CPAR. */ - assert(!(arm_feature(env, ARM_FEATURE_VFP) && - arm_feature(env, ARM_FEATURE_XSCALE))); + assert(arm_feature(&cpu->env, ARM_FEATURE_AARCH64) || + !cpu_isar_feature(aa32_vfp_simd, cpu) || + !arm_feature(env, ARM_FEATURE_XSCALE)); if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool vfp_needed(void *opaque) { ARMCPU *cpu = opaque; - CPUARMState *env = &cpu->env; - return arm_feature(env, ARM_FEATURE_VFP); + return (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) + ? cpu_isar_feature(aa64_fp_simd, cpu) + : cpu_isar_feature(aa32_vfp_simd, cpu)); } static int get_fpscr(QEMUFile *f, void *opaque, size_t size, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Shuffle the order of the checks so that we test the ISA before we test anything else, such as the register arguments. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-vfp.inc.c | 140 +++++++++++++++++---------------- 1 file changed, 71 insertions(+), 69 deletions(-) diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSEL(DisasContext *s, arg_VSEL *a) return false; } - /* UNDEF accesses to D16-D31 if they don't exist */ - if (dp && !dc_isar_feature(aa32_simd_r32, s) && - ((a->vm | a->vn | a->vd) & 0x10)) { + if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist */ + if (dp && !dc_isar_feature(aa32_simd_r32, s) && + ((a->vm | a->vn | a->vd) & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMINMAXNM(DisasContext *s, arg_VMINMAXNM *a) return false; } - /* UNDEF accesses to D16-D31 if they don't exist */ - if (dp && !dc_isar_feature(aa32_simd_r32, s) && - ((a->vm | a->vn | a->vd) & 0x10)) { + if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist */ + if (dp && !dc_isar_feature(aa32_simd_r32, s) && + ((a->vm | a->vn | a->vd) & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINT(DisasContext *s, arg_VRINT *a) return false; } - /* UNDEF accesses to D16-D31 if they don't exist */ - if (dp && !dc_isar_feature(aa32_simd_r32, s) && - ((a->vm | a->vd) & 0x10)) { + if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist */ + if (dp && !dc_isar_feature(aa32_simd_r32, s) && + ((a->vm | a->vd) & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT(DisasContext *s, arg_VCVT *a) return false; } - /* UNDEF accesses to D16-D31 if they don't exist */ - if (dp && !dc_isar_feature(aa32_simd_r32, s) && (a->vm & 0x10)) { + if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist */ + if (dp && !dc_isar_feature(aa32_simd_r32, s) && (a->vm & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_3op_dp(DisasContext *s, VFPGen3OpDPFn *fn, TCGv_i64 f0, f1, fd; TCGv_ptr fpst; - /* UNDEF accesses to D16-D31 if they don't exist */ - if (!dc_isar_feature(aa32_simd_r32, s) && ((vd | vn | vm) & 0x10)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist */ + if (!dc_isar_feature(aa32_simd_r32, s) && ((vd | vn | vm) & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_dp(DisasContext *s, VFPGen2OpDPFn *fn, int vd, int vm) int veclen = s->vec_len; TCGv_i64 f0, fd; - /* UNDEF accesses to D16-D31 if they don't exist */ - if (!dc_isar_feature(aa32_simd_r32, s) && ((vd | vm) & 0x10)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist */ + if (!dc_isar_feature(aa32_simd_r32, s) && ((vd | vm) & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VFM_dp(DisasContext *s, arg_VFM_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vn | a->vm) & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a) vd = a->vd; - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && (vd & 0x10)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (vd & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCMP_dp(DisasContext *s, arg_VCMP_dp *a) { TCGv_i64 vd, vm; + if (!dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + /* Vm/M bits must be zero for the Z variant */ if (a->z && a->vm != 0) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VCMP_dp(DisasContext *s, arg_VCMP_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f64_f16(DisasContext *s, arg_VCVT_f64_f16 *a) TCGv_i32 tmp; TCGv_i64 vd; + if (!dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + if (!dc_isar_feature(aa32_fp16_dpconv, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f64_f16(DisasContext *s, arg_VCVT_f64_f16 *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f16_f64(DisasContext *s, arg_VCVT_f16_f64 *a) TCGv_i32 tmp; TCGv_i64 vm; + if (!dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + if (!dc_isar_feature(aa32_fp16_dpconv, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f16_f64(DisasContext *s, arg_VCVT_f16_f64 *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTR_dp(DisasContext *s, arg_VRINTR_dp *a) TCGv_ptr fpst; TCGv_i64 tmp; + if (!dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + if (!dc_isar_feature(aa32_vrint, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTR_dp(DisasContext *s, arg_VRINTR_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTZ_dp(DisasContext *s, arg_VRINTZ_dp *a) TCGv_i64 tmp; TCGv_i32 tcg_rmode; + if (!dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + if (!dc_isar_feature(aa32_vrint, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTZ_dp(DisasContext *s, arg_VRINTZ_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTX_dp(DisasContext *s, arg_VRINTX_dp *a) TCGv_ptr fpst; TCGv_i64 tmp; + if (!dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + if (!dc_isar_feature(aa32_vrint, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTX_dp(DisasContext *s, arg_VRINTX_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_sp(DisasContext *s, arg_VCVT_sp *a) TCGv_i64 vd; TCGv_i32 vm; - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp(DisasContext *s, arg_VCVT_dp *a) TCGv_i64 vm; TCGv_i32 vd; - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && (a->vm & 0x10)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (a->vm & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_dp(DisasContext *s, arg_VCVT_int_dp *a) TCGv_i64 vd; TCGv_ptr fpst; - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VJCVT(DisasContext *s, arg_VJCVT *a) TCGv_i32 vd; TCGv_i64 vm; + if (!dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + if (!dc_isar_feature(aa32_jscvt, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VJCVT(DisasContext *s, arg_VJCVT *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_dp(DisasContext *s, arg_VCVT_fix_dp *a) TCGv_ptr fpst; int frac_bits; + if (!dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + if (!arm_dc_feature(s, ARM_FEATURE_VFP3)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_dp(DisasContext *s, arg_VCVT_fix_dp *a) return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp_int(DisasContext *s, arg_VCVT_dp_int *a) TCGv_i64 vm; TCGv_ptr fpst; - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && (a->vm & 0x10)) { + if (!dc_isar_feature(aa32_fpdp_v2, s)) { return false; } - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (a->vm & 0x10)) { return false; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Sort this check to the start of a trans_* function. Merge this with any existing test for fpdp_v2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-vfp.inc.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) * VFPv2 allows access to FPSID from userspace; VFPv3 restricts * all ID registers to privileged access only. */ - if (IS_USER(s) && arm_dc_feature(s, ARM_FEATURE_VFP3)) { + if (IS_USER(s) && dc_isar_feature(aa32_fpsp_v3, s)) { return false; } ignore_vfp_enabled = true; @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) case ARM_VFP_FPINST: case ARM_VFP_FPINST2: /* Not present in VFPv3 */ - if (IS_USER(s) || arm_dc_feature(s, ARM_FEATURE_VFP3)) { + if (IS_USER(s) || dc_isar_feature(aa32_fpsp_v3, s)) { return false; } break; @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_sp(DisasContext *s, arg_VMOV_imm_sp *a) vd = a->vd; - if (!dc_isar_feature(aa32_fpshvec, s) && - (veclen != 0 || s->vec_stride != 0)) { + if (!dc_isar_feature(aa32_fpsp_v3, s)) { return false; } - if (!arm_dc_feature(s, ARM_FEATURE_VFP3)) { + if (!dc_isar_feature(aa32_fpshvec, s) && + (veclen != 0 || s->vec_stride != 0)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a) vd = a->vd; - if (!dc_isar_feature(aa32_fpdp_v2, s)) { + if (!dc_isar_feature(aa32_fpdp_v3, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a) return false; } - if (!arm_dc_feature(s, ARM_FEATURE_VFP3)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_sp(DisasContext *s, arg_VCVT_fix_sp *a) TCGv_ptr fpst; int frac_bits; - if (!arm_dc_feature(s, ARM_FEATURE_VFP3)) { + if (!dc_isar_feature(aa32_fpsp_v3, s)) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_dp(DisasContext *s, arg_VCVT_fix_dp *a) TCGv_ptr fpst; int frac_bits; - if (!dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - - if (!arm_dc_feature(s, ARM_FEATURE_VFP3)) { + if (!dc_isar_feature(aa32_fpdp_v3, s)) { return false; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We will eventually remove the early ARM_FEATURE_VFP test, so add a proper test for each trans_* that does not already have another ISA test. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-vfp.inc.c | 78 ++++++++++++++++++++++++++++++---- 1 file changed, 69 insertions(+), 9 deletions(-) diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_to_gp(DisasContext *s, arg_VMOV_to_gp *a) int pass; uint32_t offset; + /* SIZE == 2 is a VFP instruction; otherwise NEON. */ + if (a->size == 2 + ? !dc_isar_feature(aa32_fpsp_v2, s) + : !arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + /* UNDEF accesses to D16-D31 if they don't exist */ if (!dc_isar_feature(aa32_simd_r32, s) && (a->vn & 0x10)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_to_gp(DisasContext *s, arg_VMOV_to_gp *a) pass = extract32(offset, 2, 1); offset = extract32(offset, 0, 2) * 8; - if (a->size != 2 && !arm_dc_feature(s, ARM_FEATURE_NEON)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_from_gp(DisasContext *s, arg_VMOV_from_gp *a) int pass; uint32_t offset; + /* SIZE == 2 is a VFP instruction; otherwise NEON. */ + if (a->size == 2 + ? !dc_isar_feature(aa32_fpsp_v2, s) + : !arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + /* UNDEF accesses to D16-D31 if they don't exist */ if (!dc_isar_feature(aa32_simd_r32, s) && (a->vn & 0x10)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_from_gp(DisasContext *s, arg_VMOV_from_gp *a) pass = extract32(offset, 2, 1); offset = extract32(offset, 0, 2) * 8; - if (a->size != 2 && !arm_dc_feature(s, ARM_FEATURE_NEON)) { - return false; - } - if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) TCGv_i32 tmp; bool ignore_vfp_enabled = false; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + if (arm_dc_feature(s, ARM_FEATURE_M)) { /* * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_single(DisasContext *s, arg_VMOV_single *a) { TCGv_i32 tmp; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_64_sp(DisasContext *s, arg_VMOV_64_sp *a) { TCGv_i32 tmp; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + /* * VMOV between two general-purpose registers and two single precision * floating point registers @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_64_dp(DisasContext *s, arg_VMOV_64_dp *a) /* * VMOV between two general-purpose registers and one double precision - * floating point register + * floating point register. Note that this does not require support + * for double precision arithmetic. */ + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } /* UNDEF accesses to D16-D31 if they don't exist */ if (!dc_isar_feature(aa32_simd_r32, s) && (a->vm & 0x10)) { @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_sp(DisasContext *s, arg_VLDR_VSTR_sp *a) uint32_t offset; TCGv_i32 addr, tmp; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_dp(DisasContext *s, arg_VLDR_VSTR_dp *a) TCGv_i32 addr; TCGv_i64 tmp; + /* Note that this does not require support for double arithmetic. */ + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + /* UNDEF accesses to D16-D31 if they don't exist */ if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VLDM_VSTM_sp(DisasContext *s, arg_VLDM_VSTM_sp *a) TCGv_i32 addr, tmp; int i, n; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + n = a->imm; if (n == 0 || (a->vd + n) > 32) { @@ -XXX,XX +XXX,XX @@ static bool trans_VLDM_VSTM_dp(DisasContext *s, arg_VLDM_VSTM_dp *a) TCGv_i64 tmp; int i, n; + /* Note that this does not require support for double arithmetic. */ + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + n = a->imm >> 1; if (n == 0 || (a->vd + n) > 32 || n > 16) { @@ -XXX,XX +XXX,XX @@ static bool do_vfp_3op_sp(DisasContext *s, VFPGen3OpSPFn *fn, TCGv_i32 f0, f1, fd; TCGv_ptr fpst; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + if (!dc_isar_feature(aa32_fpshvec, s) && (veclen != 0 || s->vec_stride != 0)) { return false; @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_sp(DisasContext *s, VFPGen2OpSPFn *fn, int vd, int vm) int veclen = s->vec_len; TCGv_i32 f0, fd; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + if (!dc_isar_feature(aa32_fpshvec, s) && (veclen != 0 || s->vec_stride != 0)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VCMP_sp(DisasContext *s, arg_VCMP_sp *a) { TCGv_i32 vd, vm; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + /* Vm/M bits must be zero for the Z variant */ if (a->z && a->vm != 0) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_sp(DisasContext *s, arg_VCVT_int_sp *a) TCGv_i32 vm; TCGv_ptr fpst; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + if (!vfp_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_sp_int(DisasContext *s, arg_VCVT_sp_int *a) TCGv_i32 vm; TCGv_ptr fpst; + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + if (!vfp_access_check(s)) { return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> All remaining tests for VFP4 are for fused multiply-add insns. Since the MVFR1 field is used for both VFP and NEON, move its adjustment from the !has_neon block to the (!has_vfp && !has_neon) block. Test for vfp of the appropraite width alongside the test for simdfmac within translate-vfp.inc.c. Within disas_neon_data_insn, we have already tested for ARM_FEATURE_NEON. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 12 ++++++++++++ target/arm/cpu.c | 6 +++++- target/arm/translate-vfp.inc.c | 22 ++++++++++++++++++---- target/arm/translate.c | 2 +- 4 files changed, 36 insertions(+), 6 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_fp16_dpconv(const ARMISARegisters *id) return FIELD_EX32(id->mvfr1, MVFR1, FPHP) > 1; } +/* + * Note that this ID register field covers both VFP and Neon FMAC, + * so should usually be tested in combination with some other + * check that confirms the presence of whichever of VFP or Neon is + * relevant, to avoid accidentally enabling a Neon feature on + * a VFP-no-Neon core or vice-versa. + */ +static inline bool isar_feature_aa32_simdfmac(const ARMISARegisters *id) +{ + return FIELD_EX32(id->mvfr1, MVFR1, SIMDFMAC) != 0; +} + static inline bool isar_feature_aa32_vsel(const ARMISARegisters *id) { return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 1; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) u = FIELD_DP32(u, MVFR1, SIMDINT, 0); u = FIELD_DP32(u, MVFR1, SIMDSP, 0); u = FIELD_DP32(u, MVFR1, SIMDHP, 0); - u = FIELD_DP32(u, MVFR1, SIMDFMAC, 0); cpu->isar.mvfr1 = u; u = cpu->isar.mvfr2; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) u = cpu->isar.mvfr0; u = FIELD_DP32(u, MVFR0, SIMDREG, 0); cpu->isar.mvfr0 = u; + + /* Despite the name, this field covers both VFP and Neon */ + u = cpu->isar.mvfr1; + u = FIELD_DP32(u, MVFR1, SIMDFMAC, 0); + cpu->isar.mvfr1 = u; } if (arm_feature(env, ARM_FEATURE_M) && !cpu->has_dsp) { diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VFM_sp(DisasContext *s, arg_VFM_sp *a) /* * Present in VFPv4 only. + * Note that we can't rely on the SIMDFMAC check alone, because + * in a Neon-no-VFP core that ID register field will be non-zero. + */ + if (!dc_isar_feature(aa32_simdfmac, s) || + !dc_isar_feature(aa32_fpsp_v2, s)) { + return false; + } + /* * In v7A, UNPREDICTABLE with non-zero vector length/stride; from * v8A, must UNDEF. We choose to UNDEF for both v7A and v8A. */ - if (!arm_dc_feature(s, ARM_FEATURE_VFP4) || - (s->vec_len != 0 || s->vec_stride != 0)) { + if (s->vec_len != 0 || s->vec_stride != 0) { return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_VFM_dp(DisasContext *s, arg_VFM_dp *a) /* * Present in VFPv4 only. + * Note that we can't rely on the SIMDFMAC check alone, because + * in a Neon-no-VFP core that ID register field will be non-zero. + */ + if (!dc_isar_feature(aa32_simdfmac, s) || + !dc_isar_feature(aa32_fpdp_v2, s)) { + return false; + } + /* * In v7A, UNPREDICTABLE with non-zero vector length/stride; from * v8A, must UNDEF. We choose to UNDEF for both v7A and v8A. */ - if (!arm_dc_feature(s, ARM_FEATURE_VFP4) || - (s->vec_len != 0 || s->vec_stride != 0)) { + if (s->vec_len != 0 || s->vec_stride != 0) { return false; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } break; case NEON_3R_VFM_VQRDMLSH: - if (!arm_dc_feature(s, ARM_FEATURE_VFP4)) { + if (!dc_isar_feature(aa32_simdfmac, s)) { return 1; } break; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We now have proper ISA checks within each trans_* function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_neon_dup_high16(TCGv_i32 var) */ static int disas_vfp_insn(DisasContext *s, uint32_t insn) { - if (!arm_dc_feature(s, ARM_FEATURE_VFP)) { - return 1; - } - /* * If the decodetree decoder handles this insn it will always * emit code to either execute the insn or generate an appropriate -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Now that we no longer have an early check for ARM_FEATURE_VFP, we can use the proper ISA check in trans_VLLDM_VLSTM. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-vfp.inc.c | 39 +++++++++++++++++++++++++ target/arm/translate.c | 53 ++++++---------------------------- target/arm/vfp.decode | 2 ++ 3 files changed, 50 insertions(+), 44 deletions(-) diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp_int(DisasContext *s, arg_VCVT_dp_int *a) tcg_temp_free_ptr(fpst); return true; } + +/* + * Decode VLLDM and VLSTM are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that vfp_access_check() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. + */ +static bool trans_VLLDM_VLSTM(DisasContext *s, arg_VLLDM_VLSTM *a) +{ + TCGv_i32 fptr; + + if (!arm_dc_feature(s, ARM_FEATURE_M) || + !arm_dc_feature(s, ARM_FEATURE_V8)) { + return false; + } + /* If not secure, UNDEF. */ + if (!s->v8m_secure) { + return false; + } + /* If no fpu, NOP. */ + if (!dc_isar_feature(aa32_vfp, s)) { + return true; + } + + fptr = load_reg(s, a->rn); + if (a->l) { + gen_helper_v7m_vlldm(cpu_env, fptr); + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) goto illegal_op; /* op0 = 0b11 : unallocated */ } - /* - * Decode VLLDM and VLSTM first: these are nonstandard because: - * * if there is no FPU then these insns must NOP in - * Secure state and UNDEF in Nonsecure state - * * if there is an FPU then these insns do not have - * the usual behaviour that disas_vfp_insn() provides of - * being controlled by CPACR/NSACR enable bits or the - * lazy-stacking logic. - */ - if (arm_dc_feature(s, ARM_FEATURE_V8) && - (insn & 0xffa00f00) == 0xec200a00) { - /* 0b1110_1100_0x1x_xxxx_xxxx_1010_xxxx_xxxx - * - VLLDM, VLSTM - * We choose to UNDEF if the RAZ bits are non-zero. - */ - if (!s->v8m_secure || (insn & 0x0040f0ff)) { + if (disas_vfp_insn(s, insn)) { + if (((insn >> 8) & 0xe) == 10 && + dc_isar_feature(aa32_fpsp_v2, s)) { + /* FP, and the CPU supports it */ goto illegal_op; + } else { + /* All other insns: NOCP */ + gen_exception_insn(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), + default_exception_el(s)); } - - if (arm_dc_feature(s, ARM_FEATURE_VFP)) { - uint32_t rn = (insn >> 16) & 0xf; - TCGv_i32 fptr = load_reg(s, rn); - - if (extract32(insn, 20, 1)) { - gen_helper_v7m_vlldm(cpu_env, fptr); - } else { - gen_helper_v7m_vlstm(cpu_env, fptr); - } - tcg_temp_free_i32(fptr); - - /* End the TB, because we have updated FP control bits */ - s->base.is_jmp = DISAS_UPDATE; - } - break; } - if (arm_dc_feature(s, ARM_FEATURE_VFP) && - ((insn >> 8) & 0xe) == 10) { - /* FP, and the CPU supports it */ - if (disas_vfp_insn(s, insn)) { - goto illegal_op; - } - break; - } - - /* All other insns: NOCP */ - gen_exception_insn(s, s->pc_curr, EXCP_NOCP, syn_uncategorized(), - default_exception_el(s)); break; } if ((insn & 0xfe000a00) == 0xfc000800 diff --git a/target/arm/vfp.decode b/target/arm/vfp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp.decode +++ b/target/arm/vfp.decode @@ -XXX,XX +XXX,XX @@ VCVT_sp_int ---- 1110 1.11 110 s:1 .... 1010 rz:1 1.0 .... \ vd=%vd_sp vm=%vm_sp VCVT_dp_int ---- 1110 1.11 110 s:1 .... 1011 rz:1 1.0 .... \ vd=%vd_sp vm=%vm_dp + +VLLDM_VLSTM 1110 1100 001 l:1 rn:4 0000 1010 0000 0000 -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Have the calls adjacent as an intermediate step toward actually merging the decodes. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 83 +++++++++++++++--------------------------- 1 file changed, 29 insertions(+), 54 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_neon_dup_high16(TCGv_i32 var) tcg_temp_free_i32(tmp); } -/* - * Disassemble a VFP instruction. Returns nonzero if an error occurred - * (ie. an undefined instruction). - */ -static int disas_vfp_insn(DisasContext *s, uint32_t insn) -{ - /* - * If the decodetree decoder handles this insn it will always - * emit code to either execute the insn or generate an appropriate - * exception; so we don't need to ever return non-zero to tell - * the calling code to emit an UNDEF exception. - */ - if (extract32(insn, 28, 4) == 0xf) { - if (disas_vfp_uncond(s, insn)) { - return 0; - } - } else { - if (disas_vfp(s, insn)) { - return 0; - } - } - /* If the decodetree decoder didn't handle this insn, it must be UNDEF */ - return 1; -} - static inline bool use_goto_tb(DisasContext *s, target_ulong dest) { #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) ARCH(5); /* Unconditional instructions. */ - if (disas_a32_uncond(s, insn)) { + /* TODO: Perhaps merge these into one decodetree output file. */ + if (disas_a32_uncond(s, insn) || + disas_vfp_uncond(s, insn)) { return; } /* fall back to legacy decoder */ @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } return; } - if ((insn & 0x0f000e10) == 0x0e000a00) { - /* VFP. */ - if (disas_vfp_insn(s, insn)) { - goto illegal_op; - } - return; - } if ((insn & 0x0e000f00) == 0x0c000100) { if (arm_dc_feature(s, ARM_FEATURE_IWMMXT)) { /* iWMMXt register transfer. */ @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) arm_skip_unless(s, cond); } - if (disas_a32(s, insn)) { + /* TODO: Perhaps merge these into one decodetree output file. */ + if (disas_a32(s, insn) || + disas_vfp(s, insn)) { return; } /* fall back to legacy decoder */ @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) case 0xd: case 0xe: if (((insn >> 8) & 0xe) == 10) { - /* VFP. */ - if (disas_vfp_insn(s, insn)) { - goto illegal_op; - } - } else if (disas_coproc_insn(s, insn)) { + /* VFP, but failed disas_vfp. */ + goto illegal_op; + } + if (disas_coproc_insn(s, insn)) { /* Coprocessor. */ goto illegal_op; } @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) ARCH(6T2); } - if (disas_t32(s, insn)) { + /* + * TODO: Perhaps merge these into one decodetree output file. + * Note disas_vfp is written for a32 with cond field in the + * top nibble. The t32 encoding requires 0xe in the top nibble. + */ + if (disas_t32(s, insn) || + disas_vfp_uncond(s, insn) || + ((insn >> 28) == 0xe && disas_vfp(s, insn))) { return; } /* fall back to legacy decoder */ @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) goto illegal_op; /* op0 = 0b11 : unallocated */ } - if (disas_vfp_insn(s, insn)) { - if (((insn >> 8) & 0xe) == 10 && - dc_isar_feature(aa32_fpsp_v2, s)) { - /* FP, and the CPU supports it */ - goto illegal_op; - } else { - /* All other insns: NOCP */ - gen_exception_insn(s, s->pc_curr, EXCP_NOCP, - syn_uncategorized(), - default_exception_el(s)); - } + if (((insn >> 8) & 0xe) == 10 && + dc_isar_feature(aa32_fpsp_v2, s)) { + /* FP, and the CPU supports it */ + goto illegal_op; + } else { + /* All other insns: NOCP */ + gen_exception_insn(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), + default_exception_el(s)); } break; } @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) goto illegal_op; } } else if (((insn >> 8) & 0xe) == 10) { - if (disas_vfp_insn(s, insn)) { - goto illegal_op; - } + /* VFP, but failed disas_vfp. */ + goto illegal_op; } else { if (insn & (1 << 28)) goto illegal_op; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use isar feature tests instead of feature bit tests. Although none of QEMUs current cpus have VFPv3 without D32, replace the large comment explaining why with one line that sets ARM_HWCAP_ARM_VFPv3D16 under the correct conditions. Mirror the test sequence used in the linux kernel. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) /* EDSP is in v5TE and above, but all our v5 CPUs are v5TE */ GET_FEATURE(ARM_FEATURE_V5, ARM_HWCAP_ARM_EDSP); - GET_FEATURE(ARM_FEATURE_VFP, ARM_HWCAP_ARM_VFP); GET_FEATURE(ARM_FEATURE_IWMMXT, ARM_HWCAP_ARM_IWMMXT); GET_FEATURE(ARM_FEATURE_THUMB2EE, ARM_HWCAP_ARM_THUMBEE); GET_FEATURE(ARM_FEATURE_NEON, ARM_HWCAP_ARM_NEON); - GET_FEATURE(ARM_FEATURE_VFP3, ARM_HWCAP_ARM_VFPv3); GET_FEATURE(ARM_FEATURE_V6K, ARM_HWCAP_ARM_TLS); - GET_FEATURE(ARM_FEATURE_VFP4, ARM_HWCAP_ARM_VFPv4); + GET_FEATURE(ARM_FEATURE_LPAE, ARM_HWCAP_ARM_LPAE); GET_FEATURE_ID(aa32_arm_div, ARM_HWCAP_ARM_IDIVA); GET_FEATURE_ID(aa32_thumb_div, ARM_HWCAP_ARM_IDIVT); - /* All QEMU's VFPv3 CPUs have 32 registers, see VFP_DREG in translate.c. - * Note that the ARM_HWCAP_ARM_VFPv3D16 bit is always the inverse of - * ARM_HWCAP_ARM_VFPD32 (and so always clear for QEMU); it is unrelated - * to our VFP_FP16 feature bit. - */ - GET_FEATURE(ARM_FEATURE_VFP3, ARM_HWCAP_ARM_VFPD32); - GET_FEATURE(ARM_FEATURE_LPAE, ARM_HWCAP_ARM_LPAE); + GET_FEATURE_ID(aa32_vfp, ARM_HWCAP_ARM_VFP); + + if (cpu_isar_feature(aa32_fpsp_v3, cpu) || + cpu_isar_feature(aa32_fpdp_v3, cpu)) { + hwcaps |= ARM_HWCAP_ARM_VFPv3; + if (cpu_isar_feature(aa32_simd_r32, cpu)) { + hwcaps |= ARM_HWCAP_ARM_VFPD32; + } else { + hwcaps |= ARM_HWCAP_ARM_VFPv3D16; + } + } + GET_FEATURE_ID(aa32_simdfmac, ARM_HWCAP_ARM_VFPv4); return hwcaps; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We have converted all tests against these features to ISAR tests. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 --- target/arm/cpu.c | 25 ------------------------- target/arm/cpu64.c | 3 --- target/arm/kvm32.c | 5 ----- target/arm/kvm64.c | 1 - 5 files changed, 37 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ QEMU_BUILD_BUG_ON(ARRAY_SIZE(((ARMCPU *)0)->ccsidr) <= R_V7M_CSSELR_INDEX_MASK); * mapping in linux-user/elfload.c:get_elf_hwcap(). */ enum arm_features { - ARM_FEATURE_VFP, ARM_FEATURE_AUXCR, /* ARM1026 Auxiliary control register. */ ARM_FEATURE_XSCALE, /* Intel XScale extensions. */ ARM_FEATURE_IWMMXT, /* Intel iwMMXt extension. */ @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V7, ARM_FEATURE_THUMB2, ARM_FEATURE_PMSA, /* no MMU; may have Memory Protection Unit */ - ARM_FEATURE_VFP3, ARM_FEATURE_NEON, ARM_FEATURE_M, /* Microcontroller profile. */ ARM_FEATURE_OMAPCP, /* OMAP specific CP15 ops handling. */ @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V5, ARM_FEATURE_STRONGARM, ARM_FEATURE_VAPA, /* cp15 VA to PA lookups */ - ARM_FEATURE_VFP4, /* VFPv4 (implies that NEON is v2) */ ARM_FEATURE_GENERIC_TIMER, ARM_FEATURE_MVFR, /* Media and VFP Feature Registers 0 and 1 */ ARM_FEATURE_DUMMY_C15_REGS, /* RAZ/WI all of cp15 crn=15 */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) if (arm_feature(&cpu->env, ARM_FEATURE_M)) { set_feature(&cpu->env, ARM_FEATURE_PMSA); } - /* Similarly for the VFP feature bits */ - if (arm_feature(&cpu->env, ARM_FEATURE_VFP4)) { - set_feature(&cpu->env, ARM_FEATURE_VFP3); - } - if (arm_feature(&cpu->env, ARM_FEATURE_VFP3)) { - set_feature(&cpu->env, ARM_FEATURE_VFP); - } if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) uint64_t t; uint32_t u; - unset_feature(env, ARM_FEATURE_VFP); - unset_feature(env, ARM_FEATURE_VFP3); - unset_feature(env, ARM_FEATURE_VFP4); - t = cpu->isar.id_aa64isar1; t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 0); cpu->isar.id_aa64isar1 = t; @@ -XXX,XX +XXX,XX @@ static void arm926_initfn(Object *obj) cpu->dtb_compatible = "arm,arm926"; set_feature(&cpu->env, ARM_FEATURE_V5); - set_feature(&cpu->env, ARM_FEATURE_VFP); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN); cpu->midr = 0x41069265; @@ -XXX,XX +XXX,XX @@ static void arm1026_initfn(Object *obj) cpu->dtb_compatible = "arm,arm1026"; set_feature(&cpu->env, ARM_FEATURE_V5); - set_feature(&cpu->env, ARM_FEATURE_VFP); set_feature(&cpu->env, ARM_FEATURE_AUXCR); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN); @@ -XXX,XX +XXX,XX @@ static void arm1136_r2_initfn(Object *obj) cpu->dtb_compatible = "arm,arm1136"; set_feature(&cpu->env, ARM_FEATURE_V6); - set_feature(&cpu->env, ARM_FEATURE_VFP); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); @@ -XXX,XX +XXX,XX @@ static void arm1136_initfn(Object *obj) cpu->dtb_compatible = "arm,arm1136"; set_feature(&cpu->env, ARM_FEATURE_V6K); set_feature(&cpu->env, ARM_FEATURE_V6); - set_feature(&cpu->env, ARM_FEATURE_VFP); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); @@ -XXX,XX +XXX,XX @@ static void arm1176_initfn(Object *obj) cpu->dtb_compatible = "arm,arm1176"; set_feature(&cpu->env, ARM_FEATURE_V6K); - set_feature(&cpu->env, ARM_FEATURE_VFP); set_feature(&cpu->env, ARM_FEATURE_VAPA); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); @@ -XXX,XX +XXX,XX @@ static void arm11mpcore_initfn(Object *obj) cpu->dtb_compatible = "arm,arm11mpcore"; set_feature(&cpu->env, ARM_FEATURE_V6K); - set_feature(&cpu->env, ARM_FEATURE_VFP); set_feature(&cpu->env, ARM_FEATURE_VAPA); set_feature(&cpu->env, ARM_FEATURE_MPIDR); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); - set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; cpu->isar.mvfr0 = 0x10110021; @@ -XXX,XX +XXX,XX @@ static void cortex_m7_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); - set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x411fc272; /* r1p2 */ cpu->pmsav7_dregion = 8; cpu->isar.mvfr0 = 0x10110221; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); - set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; @@ -XXX,XX +XXX,XX @@ static void cortex_r5f_initfn(Object *obj) ARMCPU *cpu = ARM_CPU(obj); cortex_r5_initfn(obj); - set_feature(&cpu->env, ARM_FEATURE_VFP3); cpu->isar.mvfr0 = 0x10110221; cpu->isar.mvfr1 = 0x00000011; } @@ -XXX,XX +XXX,XX @@ static void cortex_a8_initfn(Object *obj) cpu->dtb_compatible = "arm,cortex-a8"; set_feature(&cpu->env, ARM_FEATURE_V7); - set_feature(&cpu->env, ARM_FEATURE_VFP3); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); @@ -XXX,XX +XXX,XX @@ static void cortex_a9_initfn(Object *obj) cpu->dtb_compatible = "arm,cortex-a9"; set_feature(&cpu->env, ARM_FEATURE_V7); - set_feature(&cpu->env, ARM_FEATURE_VFP3); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); set_feature(&cpu->env, ARM_FEATURE_EL3); @@ -XXX,XX +XXX,XX @@ static void cortex_a7_initfn(Object *obj) cpu->dtb_compatible = "arm,cortex-a7"; set_feature(&cpu->env, ARM_FEATURE_V7VE); - set_feature(&cpu->env, ARM_FEATURE_VFP4); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); @@ -XXX,XX +XXX,XX @@ static void cortex_a15_initfn(Object *obj) cpu->dtb_compatible = "arm,cortex-a15"; set_feature(&cpu->env, ARM_FEATURE_V7VE); - set_feature(&cpu->env, ARM_FEATURE_VFP4); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj) cpu->dtb_compatible = "arm,cortex-a57"; set_feature(&cpu->env, ARM_FEATURE_V8); - set_feature(&cpu->env, ARM_FEATURE_VFP4); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_AARCH64); @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) cpu->dtb_compatible = "arm,cortex-a53"; set_feature(&cpu->env, ARM_FEATURE_V8); - set_feature(&cpu->env, ARM_FEATURE_VFP4); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_AARCH64); @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) cpu->dtb_compatible = "arm,cortex-a72"; set_feature(&cpu->env, ARM_FEATURE_V8); - set_feature(&cpu->env, ARM_FEATURE_VFP4); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) * bits, but a few must be tested. */ set_feature(&features, ARM_FEATURE_V7VE); - set_feature(&features, ARM_FEATURE_VFP3); set_feature(&features, ARM_FEATURE_GENERIC_TIMER); if (extract32(id_pfr0, 12, 4) == 1) { @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) if (extract32(ahcf->isar.mvfr1, 12, 4) == 1) { set_feature(&features, ARM_FEATURE_NEON); } - if (extract32(ahcf->isar.mvfr1, 28, 4) == 1) { - /* FMAC support implies VFPv4 */ - set_feature(&features, ARM_FEATURE_VFP4); - } ahcf->features = features; diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) * feature bits. */ set_feature(&features, ARM_FEATURE_V8); - set_feature(&features, ARM_FEATURE_VFP4); set_feature(&features, ARM_FEATURE_NEON); set_feature(&features, ARM_FEATURE_AARCH64); set_feature(&features, ARM_FEATURE_PMU); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Those vfp instructions without extra opcode fields can share a common @format for brevity. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp.decode | 134 ++++++++++++++++-------------------------- 1 file changed, 52 insertions(+), 82 deletions(-) diff --git a/target/arm/vfp.decode b/target/arm/vfp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp.decode +++ b/target/arm/vfp.decode @@ -XXX,XX +XXX,XX @@ %vmov_imm 16:4 0:4 +@vfp_dnm_s ................................ vm=%vm_sp vn=%vn_sp vd=%vd_sp +@vfp_dnm_d ................................ vm=%vm_dp vn=%vn_dp vd=%vd_dp + +@vfp_dm_ss ................................ vm=%vm_sp vd=%vd_sp +@vfp_dm_dd ................................ vm=%vm_dp vd=%vd_dp +@vfp_dm_ds ................................ vm=%vm_sp vd=%vd_dp +@vfp_dm_sd ................................ vm=%vm_dp vd=%vd_sp + # VMOV scalar to general-purpose register; note that this does # include some Neon cases. VMOV_to_gp ---- 1110 u:1 1. 1 .... rt:4 1011 ... 1 0000 \ @@ -XXX,XX +XXX,XX @@ VDUP ---- 1110 1 b:1 q:1 0 .... rt:4 1011 . 0 e:1 1 0000 \ vn=%vn_dp VMSR_VMRS ---- 1110 111 l:1 reg:4 rt:4 1010 0001 0000 -VMOV_single ---- 1110 000 l:1 .... rt:4 1010 . 001 0000 \ - vn=%vn_sp +VMOV_single ---- 1110 000 l:1 .... rt:4 1010 . 001 0000 vn=%vn_sp -VMOV_64_sp ---- 1100 010 op:1 rt2:4 rt:4 1010 00.1 .... \ - vm=%vm_sp -VMOV_64_dp ---- 1100 010 op:1 rt2:4 rt:4 1011 00.1 .... \ - vm=%vm_dp +VMOV_64_sp ---- 1100 010 op:1 rt2:4 rt:4 1010 00.1 .... vm=%vm_sp +VMOV_64_dp ---- 1100 010 op:1 rt2:4 rt:4 1011 00.1 .... vm=%vm_dp # Note that the half-precision variants of VLDR and VSTR are # not part of this decodetree at all because they have bits [9:8] == 0b01 -VLDR_VSTR_sp ---- 1101 u:1 .0 l:1 rn:4 .... 1010 imm:8 \ - vd=%vd_sp -VLDR_VSTR_dp ---- 1101 u:1 .0 l:1 rn:4 .... 1011 imm:8 \ - vd=%vd_dp +VLDR_VSTR_sp ---- 1101 u:1 .0 l:1 rn:4 .... 1010 imm:8 vd=%vd_sp +VLDR_VSTR_dp ---- 1101 u:1 .0 l:1 rn:4 .... 1011 imm:8 vd=%vd_dp # We split the load/store multiple up into two patterns to avoid # overlap with other insns in the "Advanced SIMD load/store and 64-bit move" @@ -XXX,XX +XXX,XX @@ VLDM_VSTM_dp ---- 1101 0.1 l:1 rn:4 .... 1011 imm:8 \ vd=%vd_dp p=1 u=0 w=1 # 3-register VFP data-processing; bits [23,21:20,6] identify the operation. -VMLA_sp ---- 1110 0.00 .... .... 1010 .0.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VMLA_dp ---- 1110 0.00 .... .... 1011 .0.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VMLA_sp ---- 1110 0.00 .... .... 1010 .0.0 .... @vfp_dnm_s +VMLA_dp ---- 1110 0.00 .... .... 1011 .0.0 .... @vfp_dnm_d -VMLS_sp ---- 1110 0.00 .... .... 1010 .1.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VMLS_dp ---- 1110 0.00 .... .... 1011 .1.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VMLS_sp ---- 1110 0.00 .... .... 1010 .1.0 .... @vfp_dnm_s +VMLS_dp ---- 1110 0.00 .... .... 1011 .1.0 .... @vfp_dnm_d -VNMLS_sp ---- 1110 0.01 .... .... 1010 .0.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VNMLS_dp ---- 1110 0.01 .... .... 1011 .0.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VNMLS_sp ---- 1110 0.01 .... .... 1010 .0.0 .... @vfp_dnm_s +VNMLS_dp ---- 1110 0.01 .... .... 1011 .0.0 .... @vfp_dnm_d -VNMLA_sp ---- 1110 0.01 .... .... 1010 .1.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VNMLA_dp ---- 1110 0.01 .... .... 1011 .1.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VNMLA_sp ---- 1110 0.01 .... .... 1010 .1.0 .... @vfp_dnm_s +VNMLA_dp ---- 1110 0.01 .... .... 1011 .1.0 .... @vfp_dnm_d -VMUL_sp ---- 1110 0.10 .... .... 1010 .0.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VMUL_dp ---- 1110 0.10 .... .... 1011 .0.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VMUL_sp ---- 1110 0.10 .... .... 1010 .0.0 .... @vfp_dnm_s +VMUL_dp ---- 1110 0.10 .... .... 1011 .0.0 .... @vfp_dnm_d -VNMUL_sp ---- 1110 0.10 .... .... 1010 .1.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VNMUL_dp ---- 1110 0.10 .... .... 1011 .1.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VNMUL_sp ---- 1110 0.10 .... .... 1010 .1.0 .... @vfp_dnm_s +VNMUL_dp ---- 1110 0.10 .... .... 1011 .1.0 .... @vfp_dnm_d -VADD_sp ---- 1110 0.11 .... .... 1010 .0.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VADD_dp ---- 1110 0.11 .... .... 1011 .0.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VADD_sp ---- 1110 0.11 .... .... 1010 .0.0 .... @vfp_dnm_s +VADD_dp ---- 1110 0.11 .... .... 1011 .0.0 .... @vfp_dnm_d -VSUB_sp ---- 1110 0.11 .... .... 1010 .1.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VSUB_dp ---- 1110 0.11 .... .... 1011 .1.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VSUB_sp ---- 1110 0.11 .... .... 1010 .1.0 .... @vfp_dnm_s +VSUB_dp ---- 1110 0.11 .... .... 1011 .1.0 .... @vfp_dnm_d -VDIV_sp ---- 1110 1.00 .... .... 1010 .0.0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp -VDIV_dp ---- 1110 1.00 .... .... 1011 .0.0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +VDIV_sp ---- 1110 1.00 .... .... 1010 .0.0 .... @vfp_dnm_s +VDIV_dp ---- 1110 1.00 .... .... 1011 .0.0 .... @vfp_dnm_d VFM_sp ---- 1110 1.01 .... .... 1010 . o2:1 . 0 .... \ vm=%vm_sp vn=%vn_sp vd=%vd_sp o1=1 @@ -XXX,XX +XXX,XX @@ VMOV_imm_sp ---- 1110 1.11 .... .... 1010 0000 .... \ VMOV_imm_dp ---- 1110 1.11 .... .... 1011 0000 .... \ vd=%vd_dp imm=%vmov_imm -VMOV_reg_sp ---- 1110 1.11 0000 .... 1010 01.0 .... \ - vd=%vd_sp vm=%vm_sp -VMOV_reg_dp ---- 1110 1.11 0000 .... 1011 01.0 .... \ - vd=%vd_dp vm=%vm_dp +VMOV_reg_sp ---- 1110 1.11 0000 .... 1010 01.0 .... @vfp_dm_ss +VMOV_reg_dp ---- 1110 1.11 0000 .... 1011 01.0 .... @vfp_dm_dd -VABS_sp ---- 1110 1.11 0000 .... 1010 11.0 .... \ - vd=%vd_sp vm=%vm_sp -VABS_dp ---- 1110 1.11 0000 .... 1011 11.0 .... \ - vd=%vd_dp vm=%vm_dp +VABS_sp ---- 1110 1.11 0000 .... 1010 11.0 .... @vfp_dm_ss +VABS_dp ---- 1110 1.11 0000 .... 1011 11.0 .... @vfp_dm_dd -VNEG_sp ---- 1110 1.11 0001 .... 1010 01.0 .... \ - vd=%vd_sp vm=%vm_sp -VNEG_dp ---- 1110 1.11 0001 .... 1011 01.0 .... \ - vd=%vd_dp vm=%vm_dp +VNEG_sp ---- 1110 1.11 0001 .... 1010 01.0 .... @vfp_dm_ss +VNEG_dp ---- 1110 1.11 0001 .... 1011 01.0 .... @vfp_dm_dd -VSQRT_sp ---- 1110 1.11 0001 .... 1010 11.0 .... \ - vd=%vd_sp vm=%vm_sp -VSQRT_dp ---- 1110 1.11 0001 .... 1011 11.0 .... \ - vd=%vd_dp vm=%vm_dp +VSQRT_sp ---- 1110 1.11 0001 .... 1010 11.0 .... @vfp_dm_ss +VSQRT_dp ---- 1110 1.11 0001 .... 1011 11.0 .... @vfp_dm_dd VCMP_sp ---- 1110 1.11 010 z:1 .... 1010 e:1 1.0 .... \ vd=%vd_sp vm=%vm_sp @@ -XXX,XX +XXX,XX @@ VCVT_f32_f16 ---- 1110 1.11 0010 .... 1010 t:1 1.0 .... \ VCVT_f64_f16 ---- 1110 1.11 0010 .... 1011 t:1 1.0 .... \ vd=%vd_dp vm=%vm_sp -# VCVTB and VCVTT to f16: Vd format is always vd_sp; Vm format depends on size bit +# VCVTB and VCVTT to f16: Vd format is always vd_sp; +# Vm format depends on size bit VCVT_f16_f32 ---- 1110 1.11 0011 .... 1010 t:1 1.0 .... \ vd=%vd_sp vm=%vm_sp VCVT_f16_f64 ---- 1110 1.11 0011 .... 1011 t:1 1.0 .... \ vd=%vd_sp vm=%vm_dp -VRINTR_sp ---- 1110 1.11 0110 .... 1010 01.0 .... \ - vd=%vd_sp vm=%vm_sp -VRINTR_dp ---- 1110 1.11 0110 .... 1011 01.0 .... \ - vd=%vd_dp vm=%vm_dp +VRINTR_sp ---- 1110 1.11 0110 .... 1010 01.0 .... @vfp_dm_ss +VRINTR_dp ---- 1110 1.11 0110 .... 1011 01.0 .... @vfp_dm_dd -VRINTZ_sp ---- 1110 1.11 0110 .... 1010 11.0 .... \ - vd=%vd_sp vm=%vm_sp -VRINTZ_dp ---- 1110 1.11 0110 .... 1011 11.0 .... \ - vd=%vd_dp vm=%vm_dp +VRINTZ_sp ---- 1110 1.11 0110 .... 1010 11.0 .... @vfp_dm_ss +VRINTZ_dp ---- 1110 1.11 0110 .... 1011 11.0 .... @vfp_dm_dd -VRINTX_sp ---- 1110 1.11 0111 .... 1010 01.0 .... \ - vd=%vd_sp vm=%vm_sp -VRINTX_dp ---- 1110 1.11 0111 .... 1011 01.0 .... \ - vd=%vd_dp vm=%vm_dp +VRINTX_sp ---- 1110 1.11 0111 .... 1010 01.0 .... @vfp_dm_ss +VRINTX_dp ---- 1110 1.11 0111 .... 1011 01.0 .... @vfp_dm_dd -# VCVT between single and double: Vm precision depends on size; Vd is its reverse -VCVT_sp ---- 1110 1.11 0111 .... 1010 11.0 .... \ - vd=%vd_dp vm=%vm_sp -VCVT_dp ---- 1110 1.11 0111 .... 1011 11.0 .... \ - vd=%vd_sp vm=%vm_dp +# VCVT between single and double: +# Vm precision depends on size; Vd is its reverse +VCVT_sp ---- 1110 1.11 0111 .... 1010 11.0 .... @vfp_dm_ds +VCVT_dp ---- 1110 1.11 0111 .... 1011 11.0 .... @vfp_dm_sd # VCVT from integer to floating point: Vm always single; Vd depends on size VCVT_int_sp ---- 1110 1.11 1000 .... 1010 s:1 1.0 .... \ @@ -XXX,XX +XXX,XX @@ VCVT_int_dp ---- 1110 1.11 1000 .... 1011 s:1 1.0 .... \ vd=%vd_dp vm=%vm_sp # VJCVT is always dp to sp -VJCVT ---- 1110 1.11 1001 .... 1011 11.0 .... \ - vd=%vd_sp vm=%vm_dp +VJCVT ---- 1110 1.11 1001 .... 1011 11.0 .... @vfp_dm_sd # VCVT between floating-point and fixed-point. The immediate value # is in the same format as a Vm single-precision register number. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Passing the raw o1 and o2 fields from the manual is less instructive than it might be. Do the full decode and let the trans_* functions pass in booleans to a helper. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-vfp.inc.c | 52 ++++++++++++++++++++++++++++++---- target/arm/vfp.decode | 17 +++++------ 2 files changed, 55 insertions(+), 14 deletions(-) diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VDIV_dp(DisasContext *s, arg_VDIV_dp *a) return do_vfp_3op_dp(s, gen_helper_vfp_divd, a->vd, a->vn, a->vm, false); } -static bool trans_VFM_sp(DisasContext *s, arg_VFM_sp *a) +static bool do_vfm_sp(DisasContext *s, arg_VFMA_sp *a, bool neg_n, bool neg_d) { /* * VFNMA : fd = muladd(-fd, fn, fm) @@ -XXX,XX +XXX,XX @@ static bool trans_VFM_sp(DisasContext *s, arg_VFM_sp *a) neon_load_reg32(vn, a->vn); neon_load_reg32(vm, a->vm); - if (a->o2) { + if (neg_n) { /* VFNMS, VFMS */ gen_helper_vfp_negs(vn, vn); } neon_load_reg32(vd, a->vd); - if (a->o1 & 1) { + if (neg_d) { /* VFNMA, VFNMS */ gen_helper_vfp_negs(vd, vd); } @@ -XXX,XX +XXX,XX @@ static bool trans_VFM_sp(DisasContext *s, arg_VFM_sp *a) return true; } -static bool trans_VFM_dp(DisasContext *s, arg_VFM_dp *a) +static bool trans_VFMA_sp(DisasContext *s, arg_VFMA_sp *a) +{ + return do_vfm_sp(s, a, false, false); +} + +static bool trans_VFMS_sp(DisasContext *s, arg_VFMS_sp *a) +{ + return do_vfm_sp(s, a, true, false); +} + +static bool trans_VFNMA_sp(DisasContext *s, arg_VFNMA_sp *a) +{ + return do_vfm_sp(s, a, false, true); +} + +static bool trans_VFNMS_sp(DisasContext *s, arg_VFNMS_sp *a) +{ + return do_vfm_sp(s, a, true, true); +} + +static bool do_vfm_dp(DisasContext *s, arg_VFMA_dp *a, bool neg_n, bool neg_d) { /* * VFNMA : fd = muladd(-fd, fn, fm) @@ -XXX,XX +XXX,XX @@ static bool trans_VFM_dp(DisasContext *s, arg_VFM_dp *a) neon_load_reg64(vn, a->vn); neon_load_reg64(vm, a->vm); - if (a->o2) { + if (neg_n) { /* VFNMS, VFMS */ gen_helper_vfp_negd(vn, vn); } neon_load_reg64(vd, a->vd); - if (a->o1 & 1) { + if (neg_d) { /* VFNMA, VFNMS */ gen_helper_vfp_negd(vd, vd); } @@ -XXX,XX +XXX,XX @@ static bool trans_VFM_dp(DisasContext *s, arg_VFM_dp *a) return true; } +static bool trans_VFMA_dp(DisasContext *s, arg_VFMA_dp *a) +{ + return do_vfm_dp(s, a, false, false); +} + +static bool trans_VFMS_dp(DisasContext *s, arg_VFMS_dp *a) +{ + return do_vfm_dp(s, a, true, false); +} + +static bool trans_VFNMA_dp(DisasContext *s, arg_VFNMA_dp *a) +{ + return do_vfm_dp(s, a, false, true); +} + +static bool trans_VFNMS_dp(DisasContext *s, arg_VFNMS_dp *a) +{ + return do_vfm_dp(s, a, true, true); +} + static bool trans_VMOV_imm_sp(DisasContext *s, arg_VMOV_imm_sp *a) { uint32_t delta_d = 0; diff --git a/target/arm/vfp.decode b/target/arm/vfp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp.decode +++ b/target/arm/vfp.decode @@ -XXX,XX +XXX,XX @@ VSUB_dp ---- 1110 0.11 .... .... 1011 .1.0 .... @vfp_dnm_d VDIV_sp ---- 1110 1.00 .... .... 1010 .0.0 .... @vfp_dnm_s VDIV_dp ---- 1110 1.00 .... .... 1011 .0.0 .... @vfp_dnm_d -VFM_sp ---- 1110 1.01 .... .... 1010 . o2:1 . 0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp o1=1 -VFM_dp ---- 1110 1.01 .... .... 1011 . o2:1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp o1=1 -VFM_sp ---- 1110 1.10 .... .... 1010 . o2:1 . 0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp o1=2 -VFM_dp ---- 1110 1.10 .... .... 1011 . o2:1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp o1=2 +VFMA_sp ---- 1110 1.10 .... .... 1010 .0. 0 .... @vfp_dnm_s +VFMS_sp ---- 1110 1.10 .... .... 1010 .1. 0 .... @vfp_dnm_s +VFNMA_sp ---- 1110 1.01 .... .... 1010 .0. 0 .... @vfp_dnm_s +VFNMS_sp ---- 1110 1.01 .... .... 1010 .1. 0 .... @vfp_dnm_s + +VFMA_dp ---- 1110 1.10 .... .... 1011 .0.0 .... @vfp_dnm_d +VFMS_dp ---- 1110 1.10 .... .... 1011 .1.0 .... @vfp_dnm_d +VFNMA_dp ---- 1110 1.01 .... .... 1011 .0.0 .... @vfp_dnm_d +VFNMS_dp ---- 1110 1.01 .... .... 1011 .1.0 .... @vfp_dnm_d VMOV_imm_sp ---- 1110 1.11 .... .... 1010 0000 .... \ vd=%vd_sp imm=%vmov_imm -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Passing the raw op field from the manual is less instructive than it might be. Do the full decode and use the existing helpers to perform the expansion. Since these are v8 insns, VECLEN+VECSTRIDE are already RES0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-vfp.inc.c | 109 +++++++++++---------------------- target/arm/vfp-uncond.decode | 12 ++-- 2 files changed, 44 insertions(+), 77 deletions(-) diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSEL(DisasContext *s, arg_VSEL *a) return true; } -static bool trans_VMINMAXNM(DisasContext *s, arg_VMINMAXNM *a) -{ - uint32_t rd, rn, rm; - bool dp = a->dp; - bool vmin = a->op; - TCGv_ptr fpst; - - if (!dc_isar_feature(aa32_vminmaxnm, s)) { - return false; - } - - if (dp && !dc_isar_feature(aa32_fpdp_v2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist */ - if (dp && !dc_isar_feature(aa32_simd_r32, s) && - ((a->vm | a->vn | a->vd) & 0x10)) { - return false; - } - - rd = a->vd; - rn = a->vn; - rm = a->vm; - - if (!vfp_access_check(s)) { - return true; - } - - fpst = get_fpstatus_ptr(0); - - if (dp) { - TCGv_i64 frn, frm, dest; - - frn = tcg_temp_new_i64(); - frm = tcg_temp_new_i64(); - dest = tcg_temp_new_i64(); - - neon_load_reg64(frn, rn); - neon_load_reg64(frm, rm); - if (vmin) { - gen_helper_vfp_minnumd(dest, frn, frm, fpst); - } else { - gen_helper_vfp_maxnumd(dest, frn, frm, fpst); - } - neon_store_reg64(dest, rd); - tcg_temp_free_i64(frn); - tcg_temp_free_i64(frm); - tcg_temp_free_i64(dest); - } else { - TCGv_i32 frn, frm, dest; - - frn = tcg_temp_new_i32(); - frm = tcg_temp_new_i32(); - dest = tcg_temp_new_i32(); - - neon_load_reg32(frn, rn); - neon_load_reg32(frm, rm); - if (vmin) { - gen_helper_vfp_minnums(dest, frn, frm, fpst); - } else { - gen_helper_vfp_maxnums(dest, frn, frm, fpst); - } - neon_store_reg32(dest, rd); - tcg_temp_free_i32(frn); - tcg_temp_free_i32(frm); - tcg_temp_free_i32(dest); - } - - tcg_temp_free_ptr(fpst); - return true; -} - /* * Table for converting the most common AArch32 encoding of * rounding mode to arm_fprounding order (which matches the @@ -XXX,XX +XXX,XX @@ static bool trans_VDIV_dp(DisasContext *s, arg_VDIV_dp *a) return do_vfp_3op_dp(s, gen_helper_vfp_divd, a->vd, a->vn, a->vm, false); } +static bool trans_VMINNM_sp(DisasContext *s, arg_VMINNM_sp *a) +{ + if (!dc_isar_feature(aa32_vminmaxnm, s)) { + return false; + } + return do_vfp_3op_sp(s, gen_helper_vfp_minnums, + a->vd, a->vn, a->vm, false); +} + +static bool trans_VMAXNM_sp(DisasContext *s, arg_VMAXNM_sp *a) +{ + if (!dc_isar_feature(aa32_vminmaxnm, s)) { + return false; + } + return do_vfp_3op_sp(s, gen_helper_vfp_maxnums, + a->vd, a->vn, a->vm, false); +} + +static bool trans_VMINNM_dp(DisasContext *s, arg_VMINNM_dp *a) +{ + if (!dc_isar_feature(aa32_vminmaxnm, s)) { + return false; + } + return do_vfp_3op_dp(s, gen_helper_vfp_minnumd, + a->vd, a->vn, a->vm, false); +} + +static bool trans_VMAXNM_dp(DisasContext *s, arg_VMAXNM_dp *a) +{ + if (!dc_isar_feature(aa32_vminmaxnm, s)) { + return false; + } + return do_vfp_3op_dp(s, gen_helper_vfp_maxnumd, + a->vd, a->vn, a->vm, false); +} + static bool do_vfm_sp(DisasContext *s, arg_VFMA_sp *a, bool neg_n, bool neg_d) { /* diff --git a/target/arm/vfp-uncond.decode b/target/arm/vfp-uncond.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp-uncond.decode +++ b/target/arm/vfp-uncond.decode @@ -XXX,XX +XXX,XX @@ %vd_dp 22:1 12:4 %vd_sp 12:4 22:1 +@vfp_dnm_s ................................ vm=%vm_sp vn=%vn_sp vd=%vd_sp +@vfp_dnm_d ................................ vm=%vm_dp vn=%vn_dp vd=%vd_dp + VSEL 1111 1110 0. cc:2 .... .... 1010 .0.0 .... \ vm=%vm_sp vn=%vn_sp vd=%vd_sp dp=0 VSEL 1111 1110 0. cc:2 .... .... 1011 .0.0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp dp=1 -VMINMAXNM 1111 1110 1.00 .... .... 1010 . op:1 .0 .... \ - vm=%vm_sp vn=%vn_sp vd=%vd_sp dp=0 -VMINMAXNM 1111 1110 1.00 .... .... 1011 . op:1 .0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp dp=1 +VMAXNM_sp 1111 1110 1.00 .... .... 1010 .0.0 .... @vfp_dnm_s +VMINNM_sp 1111 1110 1.00 .... .... 1010 .1.0 .... @vfp_dnm_s + +VMAXNM_dp 1111 1110 1.00 .... .... 1011 .0.0 .... @vfp_dnm_d +VMINNM_dp 1111 1110 1.00 .... .... 1011 .1.0 .... @vfp_dnm_d VRINT 1111 1110 1.11 10 rm:2 .... 1010 01.0 .... \ vm=%vm_sp vd=%vd_sp dp=0 -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> USB ports on Xilinx Zync must be instantiated as TYPE_CHIPIDEA to work. Linux expects and checks various chipidea registers, which do not exist with the basic ehci emulation. This patch series fixes the problem. Without this patch, USB ports fail to instantiate under Linux. ci_hdrc ci_hdrc.0: doesn't support host ci_hdrc ci_hdrc.0: no supported roles With this patch, USB ports are instantiated, and it is possible to boot from USB drive. ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 usb 1-1: new full-speed USB device number 2 using ci_hdrc usb 1-1: not running at top speed; connect to a high speed hub usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x81 has invalid maxpacket 512, setting to 64 usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x2 has invalid maxpacket 512, setting to 64 usb-storage 1-1:1.0: USB Mass Storage device detected scsi host0: usb-storage 1-1:1.0 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200215122354.13706-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ #include "hw/loader.h" #include "hw/misc/zynq-xadc.h" #include "hw/ssi/ssi.h" +#include "hw/usb/chipidea.h" #include "qemu/error-report.h" #include "hw/sd/sdhci.h" #include "hw/char/cadence_uart.h" @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET], false); zynq_init_spi_flashes(0xE000D000, pic[51-IRQ_OFFSET], true); - sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]); - sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[76-IRQ_OFFSET]); + sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]); + sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]); cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0)); cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1)); -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Xilinx USB devices are now instantiated through TYPE_CHIPIDEA, and xlnx support in the EHCI code is no longer needed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200215122354.13706-3-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-ehci-sysbus.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/hw/usb/hcd-ehci-sysbus.c b/hw/usb/hcd-ehci-sysbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci-sysbus.c +++ b/hw/usb/hcd-ehci-sysbus.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ehci_platform_type_info = { .class_init = ehci_platform_class_init, }; -static void ehci_xlnx_class_init(ObjectClass *oc, void *data) -{ - SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); - DeviceClass *dc = DEVICE_CLASS(oc); - - set_bit(DEVICE_CATEGORY_USB, dc->categories); - sec->capsbase = 0x100; - sec->opregbase = 0x140; -} - -static const TypeInfo ehci_xlnx_type_info = { - .name = "xlnx,ps7-usb", - .parent = TYPE_SYS_BUS_EHCI, - .class_init = ehci_xlnx_class_init, -}; - static void ehci_exynos4210_class_init(ObjectClass *oc, void *data) { SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void ehci_sysbus_register_types(void) { type_register_static(&ehci_type_info); type_register_static(&ehci_platform_type_info); - type_register_static(&ehci_xlnx_type_info); type_register_static(&ehci_exynos4210_type_info); type_register_static(&ehci_tegra2_type_info); type_register_static(&ehci_ppc4xx_type_info); -- 2.20.1 From: Thomas Huth <thuth@redhat.com> Old kernels from the Meego project can be used to check that Linux is at least starting on these machines. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200225172501.29609-2-philmd@redhat.com Message-Id: <20200129131920.22302-1-thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/acceptance/machine_arm_n8x0.py | 49 ++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+) create mode 100644 tests/acceptance/machine_arm_n8x0.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/rtc/twl92230.c F: include/hw/display/blizzard.h F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h +F: tests/acceptance/machine_arm_n8x0.py Palm M: Andrzej Zaborowski <balrogg@gmail.com> diff --git a/tests/acceptance/machine_arm_n8x0.py b/tests/acceptance/machine_arm_n8x0.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/acceptance/machine_arm_n8x0.py @@ -XXX,XX +XXX,XX @@ +# Functional test that boots a Linux kernel and checks the console +# +# Copyright (c) 2020 Red Hat, Inc. +# +# Author: +# Thomas Huth <thuth@redhat.com> +# +# This work is licensed under the terms of the GNU GPL, version 2 or +# later. See the COPYING file in the top-level directory. + +import os + +from avocado import skipUnless +from avocado_qemu import Test +from avocado_qemu import wait_for_console_pattern + +class N8x0Machine(Test): + """Boots the Linux kernel and checks that the console is operational""" + + timeout = 90 + + def __do_test_n8x0(self): + kernel_url = ('http://stskeeps.subnetmask.net/meego-n8x0/' + 'meego-arm-n8x0-1.0.80.20100712.1431-' + 'vmlinuz-2.6.35~rc4-129.1-n8x0') + kernel_hash = 'e9d5ab8d7548923a0061b6fbf601465e479ed269' + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) + + self.vm.set_console(console_index=1) + self.vm.add_args('-kernel', kernel_path, + '-append', 'printk.time=0 console=ttyS1') + self.vm.launch() + wait_for_console_pattern(self, 'TSC2005 driver initializing') + + @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code') + def test_n800(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:n800 + """ + self.__do_test_n8x0() + + @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code') + def test_n810(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:n810 + """ + self.__do_test_n8x0() -- 2.20.1 From: Thomas Huth <thuth@redhat.com> There is a kernel and initrd available on github which we can use for testing this machine. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200225172501.29609-3-philmd@redhat.com Message-Id: <20200131170233.14584-1-thuth@redhat.com> [PMD: Renamed test method, moved description from class to method] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/acceptance/machine_arm_integratorcp.py | 43 ++++++++++++++++++++ 2 files changed, 44 insertions(+) create mode 100644 tests/acceptance/machine_arm_integratorcp.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/arm/integratorcp.c F: hw/misc/arm_integrator_debug.c F: include/hw/misc/arm_integrator_debug.h +F: tests/acceptance/machine_arm_integratorcp.py MCIMX6UL EVK / i.MX6ul M: Peter Maydell <peter.maydell@linaro.org> diff --git a/tests/acceptance/machine_arm_integratorcp.py b/tests/acceptance/machine_arm_integratorcp.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/acceptance/machine_arm_integratorcp.py @@ -XXX,XX +XXX,XX @@ +# Functional test that boots a Linux kernel and checks the console +# +# Copyright (c) 2020 Red Hat, Inc. +# +# Author: +# Thomas Huth <thuth@redhat.com> +# +# This work is licensed under the terms of the GNU GPL, version 2 or +# later. See the COPYING file in the top-level directory. + +import os + +from avocado import skipUnless +from avocado_qemu import Test +from avocado_qemu import wait_for_console_pattern + +class IntegratorMachine(Test): + + timeout = 90 + + @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code') + def test_integratorcp_console(self): + """ + Boots the Linux kernel and checks that the console is operational + :avocado: tags=arch:arm + :avocado: tags=machine:integratorcp + """ + kernel_url = ('https://github.com/zayac/qemu-arm/raw/master/' + 'arm-test/kernel/zImage.integrator') + kernel_hash = '0d7adba893c503267c946a3cbdc63b4b54f25468' + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) + + initrd_url = ('https://github.com/zayac/qemu-arm/raw/master/' + 'arm-test/kernel/arm_root.img') + initrd_hash = 'b51e4154285bf784e017a37586428332d8c7bd8b' + initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash) + + self.vm.set_console() + self.vm.add_args('-kernel', kernel_path, + '-initrd', initrd_path, + '-append', 'printk.time=0 console=ttyAMA0') + self.vm.launch() + wait_for_console_pattern(self, 'Log in as root') -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As we want to re-use this code, extract it as a new function. Since we are using the PL011 serial console, add a Avocado tag to ease filtering of tests. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200225172501.29609-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/machine_arm_integratorcp.py | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/tests/acceptance/machine_arm_integratorcp.py b/tests/acceptance/machine_arm_integratorcp.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/machine_arm_integratorcp.py +++ b/tests/acceptance/machine_arm_integratorcp.py @@ -XXX,XX +XXX,XX @@ class IntegratorMachine(Test): timeout = 90 - @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code') - def test_integratorcp_console(self): - """ - Boots the Linux kernel and checks that the console is operational - :avocado: tags=arch:arm - :avocado: tags=machine:integratorcp - """ + def boot_integratorcp(self): kernel_url = ('https://github.com/zayac/qemu-arm/raw/master/' 'arm-test/kernel/zImage.integrator') kernel_hash = '0d7adba893c503267c946a3cbdc63b4b54f25468' @@ -XXX,XX +XXX,XX @@ class IntegratorMachine(Test): '-initrd', initrd_path, '-append', 'printk.time=0 console=ttyAMA0') self.vm.launch() + + @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code') + def test_integratorcp_console(self): + """ + Boots the Linux kernel and checks that the console is operational + :avocado: tags=arch:arm + :avocado: tags=machine:integratorcp + :avocado: tags=device:pl011 + """ + self.boot_integratorcp() wait_for_console_pattern(self, 'Log in as root') -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add a test that verifies the Tux logo is displayed on the framebuffer. We simply follow the OpenCV "Template Matching with Multiple Objects" tutorial, replacing Lionel Messi by Tux: https://docs.opencv.org/4.2.0/d4/dc6/tutorial_py_template_matching.html When OpenCV and NumPy are installed, this test can be run using: $ AVOCADO_ALLOW_UNTRUSTED_CODE=hmmm \ avocado --show=app,framebuffer run -t device:framebuffer \ tests/acceptance/machine_arm_integratorcp.py JOB ID : 8c46b0f8269242e87d738247883ea2a470df949e JOB LOG : avocado/job-results/job-2020-01-31T21.38-8c46b0f/job.log (1/1) tests/acceptance/machine_arm_integratorcp.py:IntegratorMachine.test_framebuffer_tux_logo: framebuffer: found Tux at position [x, y] = (0, 0) PASS (3.96 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 4.23 s Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20200225172501.29609-5-philmd@redhat.com Message-Id: <20200131211102.29612-3-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/machine_arm_integratorcp.py | 52 ++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/acceptance/machine_arm_integratorcp.py b/tests/acceptance/machine_arm_integratorcp.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/machine_arm_integratorcp.py +++ b/tests/acceptance/machine_arm_integratorcp.py @@ -XXX,XX +XXX,XX @@ # later. See the COPYING file in the top-level directory. import os +import logging from avocado import skipUnless from avocado_qemu import Test from avocado_qemu import wait_for_console_pattern + +NUMPY_AVAILABLE = True +try: + import numpy as np +except ImportError: + NUMPY_AVAILABLE = False + +CV2_AVAILABLE = True +try: + import cv2 +except ImportError: + CV2_AVAILABLE = False + + class IntegratorMachine(Test): timeout = 90 @@ -XXX,XX +XXX,XX @@ class IntegratorMachine(Test): """ self.boot_integratorcp() wait_for_console_pattern(self, 'Log in as root') + + @skipUnless(NUMPY_AVAILABLE, 'Python NumPy not installed') + @skipUnless(CV2_AVAILABLE, 'Python OpenCV not installed') + @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code') + def test_framebuffer_tux_logo(self): + """ + Boot Linux and verify the Tux logo is displayed on the framebuffer. + :avocado: tags=arch:arm + :avocado: tags=machine:integratorcp + :avocado: tags=device:pl110 + :avocado: tags=device:framebuffer + """ + screendump_path = os.path.join(self.workdir, "screendump.pbm") + tuxlogo_url = ('https://github.com/torvalds/linux/raw/v2.6.12/' + 'drivers/video/logo/logo_linux_vga16.ppm') + tuxlogo_hash = '3991c2ddbd1ddaecda7601f8aafbcf5b02dc86af' + tuxlogo_path = self.fetch_asset(tuxlogo_url, asset_hash=tuxlogo_hash) + + self.boot_integratorcp() + framebuffer_ready = 'Console: switching to colour frame buffer device' + wait_for_console_pattern(self, framebuffer_ready) + self.vm.command('human-monitor-command', command_line='stop') + self.vm.command('human-monitor-command', + command_line='screendump %s' % screendump_path) + logger = logging.getLogger('framebuffer') + + cpu_count = 1 + match_threshold = 0.92 + screendump_bgr = cv2.imread(screendump_path) + screendump_gray = cv2.cvtColor(screendump_bgr, cv2.COLOR_BGR2GRAY) + result = cv2.matchTemplate(screendump_gray, cv2.imread(tuxlogo_path, 0), + cv2.TM_CCOEFF_NORMED) + loc = np.where(result >= match_threshold) + tux_count = 0 + for tux_count, pt in enumerate(zip(*loc[::-1]), start=1): + logger.debug('found Tux at position [x, y] = %s', pt) + self.assertGreaterEqual(tux_count, cpu_count) -- 2.20.1 We missed an instance of using FIELD_EX32 on a 64-bit ID register, in isar_feature_aa64_pmu_8_4(). Fix it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224172846.13053-2-peter.maydell@linaro.org --- target/arm/cpu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_pmu_8_1(const ARMISARegisters *id) static inline bool isar_feature_aa64_pmu_8_4(const ARMISARegisters *id) { - return FIELD_EX32(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) >= 5 && - FIELD_EX32(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) != 0xf; + return FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) >= 5 && + FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) != 0xf; } /* -- 2.20.1 The v8.3-RCPC extension implements three new load instructions which provide slightly weaker consistency guarantees than the existing load-acquire operations. For QEMU we choose to simply implement them with a full LDAQ barrier. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224172846.13053-3-peter.maydell@linaro.org --- target/arm/cpu.h | 5 +++++ linux-user/elfload.c | 1 + target/arm/cpu64.c | 1 + target/arm/translate-a64.c | 24 ++++++++++++++++++++++++ 4 files changed, 31 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_pmu_8_4(const ARMISARegisters *id) FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) != 0xf; } +static inline bool isar_feature_aa64_rcpc_8_3(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, LRCPC) != 0; +} + /* * Feature tests for "does this exist in either 32-bit or 64-bit?" */ diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE_ID(aa64_sb, ARM_HWCAP_A64_SB); GET_FEATURE_ID(aa64_condm_4, ARM_HWCAP_A64_FLAGM); GET_FEATURE_ID(aa64_dcpop, ARM_HWCAP_A64_DCPOP); + GET_FEATURE_ID(aa64_rcpc_8_3, ARM_HWCAP_A64_LRCPC); return hwcaps; } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); + t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 1); /* ARMv8.3-RCPC */ cpu->isar.id_aa64isar1 = t; t = cpu->isar.id_aa64pfr0; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, int rs = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int o3_opc = extract32(insn, 12, 4); + bool r = extract32(insn, 22, 1); + bool a = extract32(insn, 23, 1); TCGv_i64 tcg_rs, clean_addr; AtomicThreeOpFn *fn; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, case 010: /* SWP */ fn = tcg_gen_atomic_xchg_i64; break; + case 014: /* LDAPR, LDAPRH, LDAPRB */ + if (!dc_isar_feature(aa64_rcpc_8_3, s) || + rs != 31 || a != 1 || r != 0) { + unallocated_encoding(s); + return; + } + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, gen_check_sp_alignment(s); } clean_addr = clean_data_tbi(s, cpu_reg_sp(s, rn)); + + if (o3_opc == 014) { + /* + * LDAPR* are a special case because they are a simple load, not a + * fetch-and-do-something op. + * The architectural consistency requirements here are weaker than + * full load-acquire (we only need "load-acquire processor consistent"), + * but we choose to implement them as full LDAQ. + */ + do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size, false, false, + true, rt, disas_ldst_compute_iss_sf(size, false, 0), true); + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); + return; + } + tcg_rs = read_cpu_reg(s, rs, true); if (o3_opc == 1) { /* LDCLR */ -- 2.20.1 The v8.4-RCPC extension implements some new instructions: * LDAPUR, LDAPURB, LDAPURH, LDAPRSB, LDAPRSH, LDAPRSW * STLUR, STLURB, STLURH These are all in a new subgroup of encodings that sits below the top-level "Loads and Stores" group in the Arm ARM. The STLUR* instructions have standard store-release semantics; the LDAPUR* have Load-AcquirePC semantics, but (as with LDAPR*) we choose to implement them as the slightly stronger Load-Acquire. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224172846.13053-4-peter.maydell@linaro.org --- target/arm/cpu.h | 5 +++ linux-user/elfload.c | 1 + target/arm/cpu64.c | 2 +- target/arm/translate-a64.c | 90 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 97 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_rcpc_8_3(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, LRCPC) != 0; } +static inline bool isar_feature_aa64_rcpc_8_4(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, LRCPC) >= 2; +} + /* * Feature tests for "does this exist in either 32-bit or 64-bit?" */ diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE_ID(aa64_condm_4, ARM_HWCAP_A64_FLAGM); GET_FEATURE_ID(aa64_dcpop, ARM_HWCAP_A64_DCPOP); GET_FEATURE_ID(aa64_rcpc_8_3, ARM_HWCAP_A64_LRCPC); + GET_FEATURE_ID(aa64_rcpc_8_4, ARM_HWCAP_A64_ILRCPC); return hwcaps; } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 1); /* ARMv8.3-RCPC */ + t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* ARMv8.4-RCPC */ cpu->isar.id_aa64isar1 = t; t = cpu->isar.id_aa64pfr0; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_pac(DisasContext *s, uint32_t insn, } } +/* + * LDAPR/STLR (unscaled immediate) + * + * 31 30 24 22 21 12 10 5 0 + * +------+-------------+-----+---+--------+-----+----+-----+ + * | size | 0 1 1 0 0 1 | opc | 0 | imm9 | 0 0 | Rn | Rt | + * +------+-------------+-----+---+--------+-----+----+-----+ + * + * Rt: source or destination register + * Rn: base register + * imm9: unscaled immediate offset + * opc: 00: STLUR*, 01/10/11: various LDAPUR* + * size: size of load/store + */ +static void disas_ldst_ldapr_stlr(DisasContext *s, uint32_t insn) +{ + int rt = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int offset = sextract32(insn, 12, 9); + int opc = extract32(insn, 22, 2); + int size = extract32(insn, 30, 2); + TCGv_i64 clean_addr, dirty_addr; + bool is_store = false; + bool is_signed = false; + bool extend = false; + bool iss_sf; + + if (!dc_isar_feature(aa64_rcpc_8_4, s)) { + unallocated_encoding(s); + return; + } + + switch (opc) { + case 0: /* STLURB */ + is_store = true; + break; + case 1: /* LDAPUR* */ + break; + case 2: /* LDAPURS* 64-bit variant */ + if (size == 3) { + unallocated_encoding(s); + return; + } + is_signed = true; + break; + case 3: /* LDAPURS* 32-bit variant */ + if (size > 1) { + unallocated_encoding(s); + return; + } + is_signed = true; + extend = true; /* zero-extend 32->64 after signed load */ + break; + default: + g_assert_not_reached(); + } + + iss_sf = disas_ldst_compute_iss_sf(size, is_signed, opc); + + if (rn == 31) { + gen_check_sp_alignment(s); + } + + dirty_addr = read_cpu_reg_sp(s, rn, 1); + tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); + clean_addr = clean_data_tbi(s, dirty_addr); + + if (is_store) { + /* Store-Release semantics */ + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); + do_gpr_st(s, cpu_reg(s, rt), clean_addr, size, true, rt, iss_sf, true); + } else { + /* + * Load-AcquirePC semantics; we implement as the slightly more + * restrictive Load-Acquire. + */ + do_gpr_ld(s, cpu_reg(s, rt), clean_addr, size, is_signed, extend, + true, rt, iss_sf, true); + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); + } +} + /* Load/store register (all forms) */ static void disas_ldst_reg(DisasContext *s, uint32_t insn) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst(DisasContext *s, uint32_t insn) case 0x0d: /* AdvSIMD load/store single structure */ disas_ldst_single_struct(s, insn); break; + case 0x19: /* LDAPR/STLR (unscaled immediate) */ + if (extract32(insn, 10, 2) != 0 || + extract32(insn, 21, 1) != 0) { + unallocated_encoding(s); + break; + } + disas_ldst_ldapr_stlr(s, insn); + break; default: unallocated_encoding(s); break; -- 2.20.1 The ARMv8.3-CCIDX extension makes the CCSIDR_EL1 system ID registers have a format that uses the full 64 bit width of the register, and adds a new CCSIDR2 register so AArch32 can get at the high 32 bits. QEMU doesn't implement caches, so we just treat these ID registers as opaque values that are set to the correct constant values for each CPU. The only thing we need to do is allow 64-bit values in our cssidr[] array and provide the CCSIDR2 accessors. We don't set the CCIDX field in our 'max' CPU because the CCSIDR constant values we use are the same as the ones used by the Cortex-A57 and they are in the old 32-bit format. This means that the extra regdef added here is unused currently, but it means that whenever in the future we add a CPU that does need the new 64-bit format it will just work when we set the cssidr values and the ID registers for it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224182626.29252-1-peter.maydell@linaro.org --- target/arm/cpu.h | 17 ++++++++++++++++- target/arm/helper.c | 19 +++++++++++++++++++ 2 files changed, 35 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* The elements of this array are the CCSIDR values for each cache, * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc. */ - uint32_t ccsidr[16]; + uint64_t ccsidr[16]; uint64_t reset_cbar; uint32_t reset_auxcr; bool reset_hivecs; @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_ac2(const ARMISARegisters *id) return FIELD_EX32(id->id_mmfr4, ID_MMFR4, AC2) != 0; } +static inline bool isar_feature_aa32_ccidx(const ARMISARegisters *id) +{ + return FIELD_EX32(id->id_mmfr4, ID_MMFR4, CCIDX) != 0; +} + /* * 64-bit feature tests via id registers. */ @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_rcpc_8_4(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, LRCPC) >= 2; } +static inline bool isar_feature_aa64_ccidx(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, CCIDX) != 0; +} + /* * Feature tests for "does this exist in either 32-bit or 64-bit?" */ @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_any_pmu_8_4(const ARMISARegisters *id) return isar_feature_aa64_pmu_8_4(id) || isar_feature_aa32_pmu_8_4(id); } +static inline bool isar_feature_any_ccidx(const ARMISARegisters *id) +{ + return isar_feature_aa64_ccidx(id) || isar_feature_aa32_ccidx(id); +} + /* * Forward to the above feature tests given an ARMCPU pointer. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo predinv_reginfo[] = { REGINFO_SENTINEL }; +static uint64_t ccsidr2_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* Read the high 32 bits of the current CCSIDR */ + return extract64(ccsidr_read(env, ri), 32, 32); +} + +static const ARMCPRegInfo ccsidr2_reginfo[] = { + { .name = "CCSIDR2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 2, + .access = PL1_R, + .accessfn = access_aa64_tid2, + .readfn = ccsidr2_read, .type = ARM_CP_NO_RAW }, + REGINFO_SENTINEL +}; + static CPAccessResult access_aa64_tid3(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, predinv_reginfo); } + if (cpu_isar_feature(any_ccidx, cpu)) { + define_arm_cp_regs(cpu, ccsidr2_reginfo); + } + #ifndef CONFIG_USER_ONLY /* * Register redirections and aliases must be done last, -- 2.20.1 In our KVM GICv2 realize function, we try to cope with old kernels that don't provide the device control API (KVM_CAP_DEVICE_CTRL): we try to use the device control, and if that fails we fall back to assuming that the kernel has the old style KVM_CREATE_IRQCHIP and that it will provide a GICv2. This doesn't cater for the possibility of a kernel and hardware which only provide a GICv3, which is very common now. On that setup we will abort() later on in kvm_arm_pmu_set_irq() when we try to wire up an interrupt to the GIC we failed to create: qemu-system-aarch64: PMU: KVM_SET_DEVICE_ATTR: Invalid argument qemu-system-aarch64: failed to set irq for PMU Aborted If the kernel advertises KVM_CAP_DEVICE_CTRL we should trust it if it says it can't create a GICv2, rather than assuming it has one. We can then produce a more helpful error message including a hint about the most probable reason for the failure. If the kernel doesn't advertise KVM_CAP_DEVICE_CTRL then it is truly ancient by this point but we might as well still fall back to a KVM_CREATE_IRQCHIP GICv2. With this patch then the user misconfiguration which previously caused an abort now prints: qemu-system-aarch64: Initialization of device kvm-arm-gic failed: error creating in-kernel VGIC: No such device Perhaps the host CPU does not support GICv2? Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Andrew Jones <drjones@redhat.com> Message-id: 20200225182435.1131-1-peter.maydell@linaro.org --- hw/intc/arm_gic_kvm.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp) KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true, &error_abort); } + } else if (kvm_check_extension(kvm_state, KVM_CAP_DEVICE_CTRL)) { + error_setg_errno(errp, -ret, "error creating in-kernel VGIC"); + error_append_hint(errp, + "Perhaps the host CPU does not support GICv2?\n"); } else if (ret != -ENODEV && ret != -ENOTSUP) { + /* + * Very ancient kernel without KVM_CAP_DEVICE_CTRL: assume that + * ENODEV or ENOTSUP mean "can't create GICv2 with KVM_CREATE_DEVICE", + * and that we will get a GICv2 via KVM_CREATE_IRQCHIP. + */ error_setg_errno(errp, -ret, "error creating in-kernel VGIC"); return; } -- 2.20.1