Arm pullreq: Rémi's ARMv8.4-SEL2 support is the big thing here. thanks -- PMM The following changes since commit f1fcb6851aba6dd9838886dc179717a11e344a1c: Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-01-19' into staging (2021-01-19 11:57:07 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210119 for you to fetch changes up to 6d39956891b3d1857af84f72f0230a6d99eb3b6a: docs: Build and install all the docs in a single manual (2021-01-19 14:38:53 +0000) ---------------------------------------------------------------- target-arm queue: * Implement IMPDEF pauth algorithm * Support ARMv8.4-SEL2 * Fix bug where we were truncating predicate vector lengths in SVE insns * Implement new pvpanic-pci device * npcm7xx_adc-test: Fix memleak in adc_qom_set * target/arm/m_helper: Silence GCC 10 maybe-uninitialized error * docs: Build and install all the docs in a single manual ---------------------------------------------------------------- Gan Qixin (1): npcm7xx_adc-test: Fix memleak in adc_qom_set Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Peter Maydell (1): docs: Build and install all the docs in a single manual Philippe Mathieu-Daudé (1): target/arm/m_helper: Silence GCC 10 maybe-uninitialized error Richard Henderson (7): target/arm: Implement an IMPDEF pauth algorithm target/arm: Add cpu properties to control pauth target/arm: Use object_property_add_bool for "sve" property target/arm: Introduce PREDDESC field definitions target/arm: Update PFIRST, PNEXT for pred_desc target/arm: Update ZIP, UZP, TRN for pred_desc target/arm: Update REV, PUNPK for pred_desc Rémi Denis-Courmont (19): target/arm: remove redundant tests target/arm: add arm_is_el2_enabled() helper target/arm: use arm_is_el2_enabled() where applicable target/arm: use arm_hcr_el2_eff() where applicable target/arm: factor MDCR_EL2 common handling target/arm: Define isar_feature function to test for presence of SEL2 target/arm: add 64-bit S-EL2 to EL exception table target/arm: add MMU stage 1 for Secure EL2 target/arm: add ARMv8.4-SEL2 system registers target/arm: handle VMID change in secure state target/arm: do S1_ptw_translate() before address space lookup target/arm: translate NS bit in page-walks target/arm: generalize 2-stage page-walk condition target/arm: secure stage 2 translation regime target/arm: set HPFAR_EL2.NS on secure stage 2 faults target/arm: revector to run-time pick target EL target/arm: Implement SCR_EL2.EEL2 target/arm: enable Secure EL2 in max CPU target/arm: refactor vae1_tlbmask() docs/conf.py | 46 ++++- docs/devel/conf.py | 15 -- docs/index.html.in | 17 -- docs/interop/conf.py | 28 --- docs/meson.build | 64 +++--- docs/specs/conf.py | 16 -- docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 +- docs/system/arm/cpu-features.rst | 21 ++ docs/system/conf.py | 28 --- docs/tools/conf.py | 37 ---- docs/user/conf.py | 15 -- include/hw/misc/pvpanic.h | 24 ++- include/hw/pci/pci.h | 1 + include/qemu/xxhash.h | 98 +++++++++ target/arm/cpu-param.h | 2 +- target/arm/cpu.h | 107 ++++++++-- target/arm/internals.h | 45 +++++ hw/misc/pvpanic-isa.c | 94 +++++++++ hw/misc/pvpanic-pci.c | 95 +++++++++ hw/misc/pvpanic.c | 85 +------- target/arm/cpu.c | 23 ++- target/arm/cpu64.c | 65 ++++-- target/arm/helper-a64.c | 8 +- target/arm/helper.c | 414 ++++++++++++++++++++++++++------------- target/arm/m_helper.c | 2 +- target/arm/monitor.c | 1 + target/arm/op_helper.c | 4 +- target/arm/pauth_helper.c | 27 ++- target/arm/sve_helper.c | 33 ++-- target/arm/tlb_helper.c | 3 + target/arm/translate-a64.c | 4 + target/arm/translate-sve.c | 31 ++- target/arm/translate.c | 36 +++- tests/qtest/arm-cpu-features.c | 13 ++ tests/qtest/npcm7xx_adc-test.c | 1 + tests/qtest/pvpanic-pci-test.c | 62 ++++++ .gitlab-ci.yml | 4 +- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 +- hw/misc/meson.build | 4 +- tests/qtest/meson.build | 3 +- 42 files changed, 1080 insertions(+), 524 deletions(-) delete mode 100644 docs/devel/conf.py delete mode 100644 docs/index.html.in delete mode 100644 docs/interop/conf.py delete mode 100644 docs/specs/conf.py delete mode 100644 docs/system/conf.py delete mode 100644 docs/tools/conf.py delete mode 100644 docs/user/conf.py create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/pvpanic-pci-test.c From: Richard Henderson <richard.henderson@linaro.org> Without hardware acceleration, a cryptographically strong algorithm is too expensive for pauth_computepac. Even with hardware accel, we are not currently expecting to link the linux-user binaries to any crypto libraries, and doing so would generally make the --static build fail. So choose XXH64 as a reasonably quick and decent hash. Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210111235740.462469-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/qemu/xxhash.h | 98 +++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 15 ++++-- target/arm/pauth_helper.c | 27 +++++++++-- 3 files changed, 131 insertions(+), 9 deletions(-) diff --git a/include/qemu/xxhash.h b/include/qemu/xxhash.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/xxhash.h +++ b/include/qemu/xxhash.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t qemu_xxhash6(uint64_t ab, uint64_t cd, uint32_t e, return qemu_xxhash7(ab, cd, e, f, 0); } +/* + * Component parts of the XXH64 algorithm from + * https://github.com/Cyan4973/xxHash/blob/v0.8.0/xxhash.h + * + * The complete algorithm looks like + * + * i = 0; + * if (len >= 32) { + * v1 = seed + XXH_PRIME64_1 + XXH_PRIME64_2; + * v2 = seed + XXH_PRIME64_2; + * v3 = seed + 0; + * v4 = seed - XXH_PRIME64_1; + * do { + * v1 = XXH64_round(v1, get64bits(input + i)); + * v2 = XXH64_round(v2, get64bits(input + i + 8)); + * v3 = XXH64_round(v3, get64bits(input + i + 16)); + * v4 = XXH64_round(v4, get64bits(input + i + 24)); + * } while ((i += 32) <= len); + * h64 = XXH64_mergerounds(v1, v2, v3, v4); + * } else { + * h64 = seed + XXH_PRIME64_5; + * } + * h64 += len; + * + * for (; i + 8 <= len; i += 8) { + * h64 ^= XXH64_round(0, get64bits(input + i)); + * h64 = rol64(h64, 27) * XXH_PRIME64_1 + XXH_PRIME64_4; + * } + * for (; i + 4 <= len; i += 4) { + * h64 ^= get32bits(input + i) * PRIME64_1; + * h64 = rol64(h64, 23) * XXH_PRIME64_2 + XXH_PRIME64_3; + * } + * for (; i < len; i += 1) { + * h64 ^= get8bits(input + i) * XXH_PRIME64_5; + * h64 = rol64(h64, 11) * XXH_PRIME64_1; + * } + * + * return XXH64_avalanche(h64) + * + * Exposing the pieces instead allows for simplified usage when + * the length is a known constant and the inputs are in registers. + */ +#define XXH_PRIME64_1 0x9E3779B185EBCA87ULL +#define XXH_PRIME64_2 0xC2B2AE3D27D4EB4FULL +#define XXH_PRIME64_3 0x165667B19E3779F9ULL +#define XXH_PRIME64_4 0x85EBCA77C2B2AE63ULL +#define XXH_PRIME64_5 0x27D4EB2F165667C5ULL + +static inline uint64_t XXH64_round(uint64_t acc, uint64_t input) +{ + return rol64(acc + input * XXH_PRIME64_2, 31) * XXH_PRIME64_1; +} + +static inline uint64_t XXH64_mergeround(uint64_t acc, uint64_t val) +{ + return (acc ^ XXH64_round(0, val)) * XXH_PRIME64_1 + XXH_PRIME64_4; +} + +static inline uint64_t XXH64_mergerounds(uint64_t v1, uint64_t v2, + uint64_t v3, uint64_t v4) +{ + uint64_t h64; + + h64 = rol64(v1, 1) + rol64(v2, 7) + rol64(v3, 12) + rol64(v4, 18); + h64 = XXH64_mergeround(h64, v1); + h64 = XXH64_mergeround(h64, v2); + h64 = XXH64_mergeround(h64, v3); + h64 = XXH64_mergeround(h64, v4); + + return h64; +} + +static inline uint64_t XXH64_avalanche(uint64_t h64) +{ + h64 ^= h64 >> 33; + h64 *= XXH_PRIME64_2; + h64 ^= h64 >> 29; + h64 *= XXH_PRIME64_3; + h64 ^= h64 >> 32; + return h64; +} + +static inline uint64_t qemu_xxhash64_4(uint64_t a, uint64_t b, + uint64_t c, uint64_t d) +{ + uint64_t v1 = QEMU_XXHASH_SEED + XXH_PRIME64_1 + XXH_PRIME64_2; + uint64_t v2 = QEMU_XXHASH_SEED + XXH_PRIME64_2; + uint64_t v3 = QEMU_XXHASH_SEED + 0; + uint64_t v4 = QEMU_XXHASH_SEED - XXH_PRIME64_1; + + v1 = XXH64_round(v1, a); + v2 = XXH64_round(v2, b); + v3 = XXH64_round(v3, c); + v4 = XXH64_round(v4, d); + + return XXH64_avalanche(XXH64_mergerounds(v1, v2, v3, v4)); +} + #endif /* QEMU_XXHASH_H */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_fcma(const ARMISARegisters *id) static inline bool isar_feature_aa64_pauth(const ARMISARegisters *id) { /* - * Note that while QEMU will only implement the architected algorithm - * QARMA, and thus APA+GPA, the host cpu for kvm may use implementation - * defined algorithms, and thus API+GPI, and this predicate controls - * migration of the 128-bit keys. + * Return true if any form of pauth is enabled, as this + * predicate controls migration of the 128-bit keys. */ return (id->id_aa64isar1 & (FIELD_DP64(0, ID_AA64ISAR1, APA, 0xf) | @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_pauth(const ARMISARegisters *id) FIELD_DP64(0, ID_AA64ISAR1, GPI, 0xf))) != 0; } +static inline bool isar_feature_aa64_pauth_arch(const ARMISARegisters *id) +{ + /* + * Return true if pauth is enabled with the architected QARMA algorithm. + * QEMU will always set APA+GPA to the same value. + */ + return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, APA) != 0; +} + static inline bool isar_feature_aa64_sb(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, SB) != 0; diff --git a/target/arm/pauth_helper.c b/target/arm/pauth_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/pauth_helper.c +++ b/target/arm/pauth_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" +#include "qemu/xxhash.h" static uint64_t pac_cell_shuffle(uint64_t i) @@ -XXX,XX +XXX,XX @@ static uint64_t tweak_inv_shuffle(uint64_t i) return o; } -static uint64_t pauth_computepac(uint64_t data, uint64_t modifier, - ARMPACKey key) +static uint64_t pauth_computepac_architected(uint64_t data, uint64_t modifier, + ARMPACKey key) { static const uint64_t RC[5] = { 0x0000000000000000ull, @@ -XXX,XX +XXX,XX @@ static uint64_t pauth_computepac(uint64_t data, uint64_t modifier, return workingval; } +static uint64_t pauth_computepac_impdef(uint64_t data, uint64_t modifier, + ARMPACKey key) +{ + return qemu_xxhash64_4(data, modifier, key.lo, key.hi); +} + +static uint64_t pauth_computepac(CPUARMState *env, uint64_t data, + uint64_t modifier, ARMPACKey key) +{ + if (cpu_isar_feature(aa64_pauth_arch, env_archcpu(env))) { + return pauth_computepac_architected(data, modifier, key); + } else { + return pauth_computepac_impdef(data, modifier, key); + } +} + static uint64_t pauth_addpac(CPUARMState *env, uint64_t ptr, uint64_t modifier, ARMPACKey *key, bool data) { @@ -XXX,XX +XXX,XX @@ static uint64_t pauth_addpac(CPUARMState *env, uint64_t ptr, uint64_t modifier, bot_bit = 64 - param.tsz; ext_ptr = deposit64(ptr, bot_bit, top_bit - bot_bit, ext); - pac = pauth_computepac(ext_ptr, modifier, *key); + pac = pauth_computepac(env, ext_ptr, modifier, *key); /* * Check if the ptr has good extension bits and corrupt the @@ -XXX,XX +XXX,XX @@ static uint64_t pauth_auth(CPUARMState *env, uint64_t ptr, uint64_t modifier, uint64_t pac, orig_ptr, test; orig_ptr = pauth_original_ptr(ptr, param); - pac = pauth_computepac(orig_ptr, modifier, *key); + pac = pauth_computepac(env, orig_ptr, modifier, *key); bot_bit = 64 - param.tsz; top_bit = 64 - 8 * param.tbi; @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(pacga)(CPUARMState *env, uint64_t x, uint64_t y) uint64_t pac; pauth_check_trap(env, arm_current_el(env), GETPC()); - pac = pauth_computepac(x, y, env->keys.apga); + pac = pauth_computepac(env, x, y, env->keys.apga); return pac & 0xffffffff00000000ull; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The crypto overhead of emulating pauth can be significant for some workloads. Add two boolean properties that allows the feature to be turned off, on with the architected algorithm, or on with an implementation defined algorithm. We need two intermediate booleans to control the state while parsing properties lest we clobber ID_AA64ISAR1 into an invalid intermediate state. Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210111235740.462469-3-richard.henderson@linaro.org [PMM: fixed docs typo, tweaked text to clarify that the impdef algorithm is specific to QEMU] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/cpu-features.rst | 21 +++++++++++++++++ target/arm/cpu.h | 10 ++++++++ target/arm/cpu.c | 13 +++++++++++ target/arm/cpu64.c | 40 ++++++++++++++++++++++++++++---- target/arm/monitor.c | 1 + tests/qtest/arm-cpu-features.c | 13 +++++++++++ 6 files changed, 94 insertions(+), 4 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ the list of KVM VCPU features and their descriptions. influence the guest scheduler behavior and/or be exposed to the guest userspace. +TCG VCPU Features +================= + +TCG VCPU features are CPU features that are specific to TCG. +Below is the list of TCG VCPU features and their descriptions. + + pauth Enable or disable `FEAT_Pauth`, pointer + authentication. By default, the feature is + enabled with `-cpu max`. + + pauth-impdef When `FEAT_Pauth` is enabled, either the + *impdef* (Implementation Defined) algorithm + is enabled or the *architected* QARMA algorithm + is enabled. By default the impdef algorithm + is disabled, and QARMA is enabled. + + The architected QARMA algorithm has good + cryptographic properties, but can be quite slow + to emulate. The impdef algorithm used by QEMU + is non-cryptographic but significantly faster. + SVE CPU Properties ================== diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct { #ifdef TARGET_AARCH64 # define ARM_MAX_VQ 16 void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp); +void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp); #else # define ARM_MAX_VQ 1 static inline void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { } +static inline void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp) { } #endif typedef struct ARMVectorReg { @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint64_t reset_cbar; uint32_t reset_auxcr; bool reset_hivecs; + + /* + * Intermediate values used during property parsing. + * Once finalized, the values should be read from ID_AA64ISAR1. + */ + bool prop_pauth; + bool prop_pauth_impdef; + /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint32_t dcz_blocksize; uint64_t rvbar; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp) error_propagate(errp, local_err); return; } + + /* + * KVM does not support modifications to this feature. + * We have not registered the cpu properties when KVM + * is in use, so the user will not be able to set them. + */ + if (!kvm_enabled()) { + arm_cpu_pauth_finalize(cpu, &local_err); + if (local_err != NULL) { + error_propagate(errp, local_err); + return; + } + } } if (kvm_enabled()) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/kvm.h" #include "kvm_arm.h" #include "qapi/visitor.h" +#include "hw/qdev-properties.h" + #ifndef CONFIG_USER_ONLY static uint64_t a57_a53_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) @@ -XXX,XX +XXX,XX @@ void aarch64_add_sve_properties(Object *obj) } } +void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp) +{ + int arch_val = 0, impdef_val = 0; + uint64_t t; + + /* TODO: Handle HaveEnhancedPAC, HaveEnhancedPAC2, HaveFPAC. */ + if (cpu->prop_pauth) { + if (cpu->prop_pauth_impdef) { + impdef_val = 1; + } else { + arch_val = 1; + } + } else if (cpu->prop_pauth_impdef) { + error_setg(errp, "cannot enable pauth-impdef without pauth"); + error_append_hint(errp, "Add pauth=on to the CPU property list.\n"); + } + + t = cpu->isar.id_aa64isar1; + t = FIELD_DP64(t, ID_AA64ISAR1, APA, arch_val); + t = FIELD_DP64(t, ID_AA64ISAR1, GPA, arch_val); + t = FIELD_DP64(t, ID_AA64ISAR1, API, impdef_val); + t = FIELD_DP64(t, ID_AA64ISAR1, GPI, impdef_val); + cpu->isar.id_aa64isar1 = t; +} + +static Property arm_cpu_pauth_property = + DEFINE_PROP_BOOL("pauth", ARMCPU, prop_pauth, true); +static Property arm_cpu_pauth_impdef_property = + DEFINE_PROP_BOOL("pauth-impdef", ARMCPU, prop_pauth_impdef, false); + /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host); * otherwise, a CPU with as many features enabled as our emulation supports. * The version of '-cpu max' for qemu-system-arm is defined in cpu.c; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, APA, 1); /* PAuth, architected only */ - t = FIELD_DP64(t, ID_AA64ISAR1, API, 0); - t = FIELD_DP64(t, ID_AA64ISAR1, GPA, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, GPI, 0); t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + + /* Default to PAUTH on, with the architected algorithm. */ + qdev_property_add_static(DEVICE(obj), &arm_cpu_pauth_property); + qdev_property_add_static(DEVICE(obj), &arm_cpu_pauth_impdef_property); } aarch64_add_sve_properties(obj); diff --git a/target/arm/monitor.c b/target/arm/monitor.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/monitor.c +++ b/target/arm/monitor.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_model_advertised_features[] = { "sve640", "sve768", "sve896", "sve1024", "sve1152", "sve1280", "sve1408", "sve1536", "sve1664", "sve1792", "sve1920", "sve2048", "kvm-no-adjvtime", "kvm-steal-time", + "pauth", "pauth-impdef", NULL }; diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void sve_tests_sve_off_kvm(const void *data) qtest_quit(qts); } +static void pauth_tests_default(QTestState *qts, const char *cpu_type) +{ + assert_has_feature_enabled(qts, cpu_type, "pauth"); + assert_has_feature_disabled(qts, cpu_type, "pauth-impdef"); + assert_set_feature(qts, cpu_type, "pauth", false); + assert_set_feature(qts, cpu_type, "pauth", true); + assert_set_feature(qts, cpu_type, "pauth-impdef", true); + assert_set_feature(qts, cpu_type, "pauth-impdef", false); + assert_error(qts, cpu_type, "cannot enable pauth-impdef without pauth", + "{ 'pauth': false, 'pauth-impdef': true }"); +} + static void test_query_cpu_model_expansion(const void *data) { QTestState *qts; @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_has_feature_enabled(qts, "cortex-a57", "aarch64"); sve_tests_default(qts, "max"); + pauth_tests_default(qts, "max"); /* Test that features that depend on KVM generate errors without. */ assert_error(qts, "max", -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The interface for object_property_add_bool is simpler, making the code easier to understand. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210111235740.462469-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void cpu_max_set_sve_max_vq(Object *obj, Visitor *v, const char *name, cpu->sve_max_vq = max_vq; } +/* + * Note that cpu_arm_get/set_sve_vq cannot use the simpler + * object_property_add_bool interface because they make use + * of the contents of "name" to determine which bit on which + * to operate. + */ static void cpu_arm_get_sve_vq(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { @@ -XXX,XX +XXX,XX @@ static void cpu_arm_set_sve_vq(Object *obj, Visitor *v, const char *name, set_bit(vq - 1, cpu->sve_vq_init); } -static void cpu_arm_get_sve(Object *obj, Visitor *v, const char *name, - void *opaque, Error **errp) +static bool cpu_arm_get_sve(Object *obj, Error **errp) { ARMCPU *cpu = ARM_CPU(obj); - bool value = cpu_isar_feature(aa64_sve, cpu); - - visit_type_bool(v, name, &value, errp); + return cpu_isar_feature(aa64_sve, cpu); } -static void cpu_arm_set_sve(Object *obj, Visitor *v, const char *name, - void *opaque, Error **errp) +static void cpu_arm_set_sve(Object *obj, bool value, Error **errp) { ARMCPU *cpu = ARM_CPU(obj); - bool value; uint64_t t; - if (!visit_type_bool(v, name, &value, errp)) { - return; - } - if (value && kvm_enabled() && !kvm_arm_sve_supported()) { error_setg(errp, "'sve' feature not supported by KVM on this host"); return; @@ -XXX,XX +XXX,XX @@ void aarch64_add_sve_properties(Object *obj) { uint32_t vq; - object_property_add(obj, "sve", "bool", cpu_arm_get_sve, - cpu_arm_set_sve, NULL, NULL); + object_property_add_bool(obj, "sve", cpu_arm_get_sve, cpu_arm_set_sve); for (vq = 1; vq <= ARM_MAX_VQ; ++vq) { char name[8]; -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> In this context, the HCR value is the effective value, and thus is zero in secure mode. The tests for HCR.{F,I}MO are sufficient. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-1-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 8 ++++---- target/arm/helper.c | 10 ++++------ 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, break; case EXCP_VFIQ: - if (secure || !(hcr_el2 & HCR_FMO) || (hcr_el2 & HCR_TGE)) { - /* VFIQs are only taken when hypervized and non-secure. */ + if (!(hcr_el2 & HCR_FMO) || (hcr_el2 & HCR_TGE)) { + /* VFIQs are only taken when hypervized. */ return false; } return !(env->daif & PSTATE_F); case EXCP_VIRQ: - if (secure || !(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) { - /* VIRQs are only taken when hypervized and non-secure. */ + if (!(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) { + /* VIRQs are only taken when hypervized. */ return false; } return !(env->daif & PSTATE_I); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void csselr_write(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) { CPUState *cs = env_cpu(env); - uint64_t hcr_el2 = arm_hcr_el2_eff(env); + bool el1 = arm_current_el(env) == 1; + uint64_t hcr_el2 = el1 ? arm_hcr_el2_eff(env) : 0; uint64_t ret = 0; - bool allow_virt = (arm_current_el(env) == 1 && - (!arm_is_secure_below_el3(env) || - (env->cp15.scr_el3 & SCR_EEL2))); - if (allow_virt && (hcr_el2 & HCR_IMO)) { + if (hcr_el2 & HCR_IMO) { if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) { ret |= CPSR_I; } @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) } } - if (allow_virt && (hcr_el2 & HCR_FMO)) { + if (hcr_el2 & HCR_FMO) { if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) { ret |= CPSR_F; } -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> This checks if EL2 is enabled (meaning EL2 registers take effects) in the current security context. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-2-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_is_secure(CPUARMState *env) return arm_is_secure_below_el3(env); } +/* + * Return true if the current security state has AArch64 EL2 or AArch32 Hyp. + * This corresponds to the pseudocode EL2Enabled() + */ +static inline bool arm_is_el2_enabled(CPUARMState *env) +{ + if (arm_feature(env, ARM_FEATURE_EL2)) { + return !arm_is_secure_below_el3(env); + } + return false; +} + #else static inline bool arm_is_secure_below_el3(CPUARMState *env) { @@ -XXX,XX +XXX,XX @@ static inline bool arm_is_secure(CPUARMState *env) { return false; } + +static inline bool arm_is_el2_enabled(CPUARMState *env) +{ + return false; +} #endif /** -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Do not assume that EL2 is available in and only in non-secure context. That equivalence is broken by ARMv8.4-SEL2. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-3-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 4 ++-- target/arm/helper-a64.c | 8 +------- target/arm/helper.c | 33 +++++++++++++-------------------- 3 files changed, 16 insertions(+), 29 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_el_is_aa64(CPUARMState *env, int el) return aa64; } - if (arm_feature(env, ARM_FEATURE_EL2) && !arm_is_secure_below_el3(env)) { + if (arm_is_el2_enabled(env)) { aa64 = aa64 && (env->cp15.hcr_el2 & HCR_RW); } @@ -XXX,XX +XXX,XX @@ static inline int arm_debug_target_el(CPUARMState *env) bool secure = arm_is_secure(env); bool route_to_el2 = false; - if (arm_feature(env, ARM_FEATURE_EL2) && !secure) { + if (arm_is_el2_enabled(env)) { route_to_el2 = env->cp15.hcr_el2 & HCR_TGE || env->cp15.mdcr_el2 & MDCR_TDE; } diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) if (new_el == -1) { goto illegal_return; } - if (new_el > cur_el - || (new_el == 2 && !arm_feature(env, ARM_FEATURE_EL2))) { + if (new_el > cur_el || (new_el == 2 && !arm_is_el2_enabled(env))) { /* Disallow return to an EL which is unimplemented or higher * than the current one. */ @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) goto illegal_return; } - if (new_el == 2 && arm_is_secure_below_el3(env)) { - /* Return to the non-existent secure-EL2 */ - goto illegal_return; - } - if (new_el == 1 && (arm_hcr_el2_eff(env) & HCR_TGE)) { goto illegal_return; } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult cpacr_access(CPUARMState *env, const ARMCPRegInfo *ri, { if (arm_feature(env, ARM_FEATURE_V8)) { /* Check if CPACR accesses are to be trapped to EL2 */ - if (arm_current_el(env) == 1 && - (env->cp15.cptr_el[2] & CPTR_TCPAC) && !arm_is_secure(env)) { + if (arm_current_el(env) == 1 && arm_is_el2_enabled(env) && + (env->cp15.cptr_el[2] & CPTR_TCPAC)) { return CP_ACCESS_TRAP_EL2; /* Check if CPACR accesses are to be trapped to EL3 */ } else if (arm_current_el(env) < 3 && @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, bool isread) { unsigned int cur_el = arm_current_el(env); - bool secure = arm_is_secure(env); + bool has_el2 = arm_is_el2_enabled(env); uint64_t hcr = arm_hcr_el2_eff(env); switch (cur_el) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, } } else { /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */ - if (arm_feature(env, ARM_FEATURE_EL2) && - timeridx == GTIMER_PHYS && !secure && + if (has_el2 && timeridx == GTIMER_PHYS && !extract32(env->cp15.cnthctl_el2, 1, 1)) { return CP_ACCESS_TRAP_EL2; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, case 1: /* Check CNTHCTL_EL2.EL1PCTEN, which changes location based on E2H. */ - if (arm_feature(env, ARM_FEATURE_EL2) && - timeridx == GTIMER_PHYS && !secure && + if (has_el2 && timeridx == GTIMER_PHYS && (hcr & HCR_E2H ? !extract32(env->cp15.cnthctl_el2, 10, 1) : !extract32(env->cp15.cnthctl_el2, 0, 1))) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_timer_access(CPUARMState *env, int timeridx, bool isread) { unsigned int cur_el = arm_current_el(env); - bool secure = arm_is_secure(env); + bool has_el2 = arm_is_el2_enabled(env); uint64_t hcr = arm_hcr_el2_eff(env); switch (cur_el) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_timer_access(CPUARMState *env, int timeridx, /* fall through */ case 1: - if (arm_feature(env, ARM_FEATURE_EL2) && - timeridx == GTIMER_PHYS && !secure) { + if (has_el2 && timeridx == GTIMER_PHYS) { if (hcr & HCR_E2H) { /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PTEN. */ if (!extract32(env->cp15.cnthctl_el2, 11, 1)) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo strongarm_cp_reginfo[] = { static uint64_t midr_read(CPUARMState *env, const ARMCPRegInfo *ri) { - ARMCPU *cpu = env_archcpu(env); unsigned int cur_el = arm_current_el(env); - bool secure = arm_is_secure(env); - if (arm_feature(&cpu->env, ARM_FEATURE_EL2) && !secure && cur_el == 1) { + if (arm_is_el2_enabled(env) && cur_el == 1) { return env->cp15.vpidr_el2; } return raw_read(env, ri); @@ -XXX,XX +XXX,XX @@ static uint64_t mpidr_read_val(CPUARMState *env) static uint64_t mpidr_read(CPUARMState *env, const ARMCPRegInfo *ri) { unsigned int cur_el = arm_current_el(env); - bool secure = arm_is_secure(env); - if (arm_feature(env, ARM_FEATURE_EL2) && !secure && cur_el == 1) { + if (arm_is_el2_enabled(env) && cur_el == 1) { return env->cp15.vmpidr_el2; } return mpidr_read_val(env); @@ -XXX,XX +XXX,XX @@ uint64_t arm_hcr_el2_eff(CPUARMState *env) { uint64_t ret = env->cp15.hcr_el2; - if (arm_is_secure_below_el3(env)) { + if (!arm_is_el2_enabled(env)) { /* * "This register has no effect if EL2 is not enabled in the * current Security state". This is ARMv8.4-SecEL2 speak for @@ -XXX,XX +XXX,XX @@ int sve_exception_el(CPUARMState *env, int el) /* CPTR_EL2. Since TZ and TFP are positive, * they will be zero when EL2 is not present. */ - if (el <= 2 && !arm_is_secure_below_el3(env)) { + if (el <= 2 && arm_is_el2_enabled(env)) { if (env->cp15.cptr_el[2] & CPTR_TZ) { return 2; } @@ -XXX,XX +XXX,XX @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) } return 0; case ARM_CPU_MODE_HYP: - return !arm_feature(env, ARM_FEATURE_EL2) - || arm_current_el(env) < 2 || arm_is_secure_below_el3(env); + return !arm_is_el2_enabled(env) || arm_current_el(env) < 2; case ARM_CPU_MODE_MON: return arm_current_el(env) < 3; default: @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) /* CPTR_EL2 : present in v7VE or v8 */ if (cur_el <= 2 && extract32(env->cp15.cptr_el[2], 10, 1) - && !arm_is_secure_below_el3(env)) { + && arm_is_el2_enabled(env)) { /* Trap FP ops at EL2, NS-EL1 or NS-EL0 to EL2 */ return 2; } -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> This will simplify accessing HCR conditionally in secure state. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-4-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_pou_access(CPUARMState *env, static int vae1_tlbmask(CPUARMState *env) { - /* Since we exclude secure first, we may read HCR_EL2 directly. */ - if (arm_is_secure_below_el3(env)) { - return ARMMMUIdxBit_SE10_1 | - ARMMMUIdxBit_SE10_1_PAN | - ARMMMUIdxBit_SE10_0; - } else if ((env->cp15.hcr_el2 & (HCR_E2H | HCR_TGE)) - == (HCR_E2H | HCR_TGE)) { + uint64_t hcr = arm_hcr_el2_eff(env); + + if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { return ARMMMUIdxBit_E20_2 | ARMMMUIdxBit_E20_2_PAN | ARMMMUIdxBit_E20_0; + } else if (arm_is_secure_below_el3(env)) { + return ARMMMUIdxBit_SE10_1 | + ARMMMUIdxBit_SE10_1_PAN | + ARMMMUIdxBit_SE10_0; } else { return ARMMMUIdxBit_E10_1 | ARMMMUIdxBit_E10_1_PAN | @@ -XXX,XX +XXX,XX @@ static inline uint64_t regime_sctlr(CPUARMState *env, ARMMMUIdx mmu_idx) static inline bool regime_translation_disabled(CPUARMState *env, ARMMMUIdx mmu_idx) { + uint64_t hcr_el2; + if (arm_feature(env, ARM_FEATURE_M)) { switch (env->v7m.mpu_ctrl[regime_is_secure(env, mmu_idx)] & (R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK)) { @@ -XXX,XX +XXX,XX @@ static inline bool regime_translation_disabled(CPUARMState *env, } } + hcr_el2 = arm_hcr_el2_eff(env); + if (mmu_idx == ARMMMUIdx_Stage2) { /* HCR.DC means HCR.VM behaves as 1 */ - return (env->cp15.hcr_el2 & (HCR_DC | HCR_VM)) == 0; + return (hcr_el2 & (HCR_DC | HCR_VM)) == 0; } - if (env->cp15.hcr_el2 & HCR_TGE) { + if (hcr_el2 & HCR_TGE) { /* TGE means that NS EL0/1 act as if SCTLR_EL1.M is zero */ if (!regime_is_secure(env, mmu_idx) && regime_el(env, mmu_idx) == 1) { return true; } } - if ((env->cp15.hcr_el2 & HCR_DC) && arm_mmu_idx_is_stage1_of_2(mmu_idx)) { + if ((hcr_el2 & HCR_DC) && arm_mmu_idx_is_stage1_of_2(mmu_idx)) { /* HCR.DC means SCTLR_EL1.M behaves as 0 */ return true; } @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, fi->s1ptw = true; return ~0; } - if ((env->cp15.hcr_el2 & HCR_PTW) && (cacheattrs.attrs & 0xf0) == 0) { + if ((arm_hcr_el2_eff(env) & HCR_PTW) && + (cacheattrs.attrs & 0xf0) == 0) { /* * PTW set and S1 walk touched S2 Device memory: * generate Permission fault. @@ -XXX,XX +XXX,XX @@ static uint8_t convert_stage2_attrs(CPUARMState *env, uint8_t s2attrs) uint8_t hihint = 0, lohint = 0; if (hiattr != 0) { /* normal memory */ - if ((env->cp15.hcr_el2 & HCR_CD) != 0) { /* cache disabled */ + if (arm_hcr_el2_eff(env) & HCR_CD) { /* cache disabled */ hiattr = loattr = 1; /* non-cacheable */ } else { if (hiattr != 1) { /* Write-through or write-back */ @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, } /* Combine the S1 and S2 cache attributes. */ - if (env->cp15.hcr_el2 & HCR_DC) { + if (arm_hcr_el2_eff(env) & HCR_DC) { /* * HCR.DC forces the first stage attributes to * Normal Non-Shareable, -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> This adds a common helper to compute the effective value of MDCR_EL2. That is the actual value if EL2 is enabled in the current security context, or 0 elsewise. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-5-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_trap_aa32s_el1(CPUARMState *env, return CP_ACCESS_TRAP_UNCATEGORIZED; } +static uint64_t arm_mdcr_el2_eff(CPUARMState *env) +{ + return arm_is_el2_enabled(env) ? env->cp15.mdcr_el2 : 0; +} + /* Check for traps to "powerdown debug" registers, which are controlled * by MDCR.TDOSA */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tdosa(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { int el = arm_current_el(env); - bool mdcr_el2_tdosa = (env->cp15.mdcr_el2 & MDCR_TDOSA) || - (env->cp15.mdcr_el2 & MDCR_TDE) || + uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); + bool mdcr_el2_tdosa = (mdcr_el2 & MDCR_TDOSA) || (mdcr_el2 & MDCR_TDE) || (arm_hcr_el2_eff(env) & HCR_TGE); - if (el < 2 && mdcr_el2_tdosa && !arm_is_secure_below_el3(env)) { + if (el < 2 && mdcr_el2_tdosa) { return CP_ACCESS_TRAP_EL2; } if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDOSA)) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tdra(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { int el = arm_current_el(env); - bool mdcr_el2_tdra = (env->cp15.mdcr_el2 & MDCR_TDRA) || - (env->cp15.mdcr_el2 & MDCR_TDE) || + uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); + bool mdcr_el2_tdra = (mdcr_el2 & MDCR_TDRA) || (mdcr_el2 & MDCR_TDE) || (arm_hcr_el2_eff(env) & HCR_TGE); - if (el < 2 && mdcr_el2_tdra && !arm_is_secure_below_el3(env)) { + if (el < 2 && mdcr_el2_tdra) { return CP_ACCESS_TRAP_EL2; } if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { int el = arm_current_el(env); - bool mdcr_el2_tda = (env->cp15.mdcr_el2 & MDCR_TDA) || - (env->cp15.mdcr_el2 & MDCR_TDE) || + uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); + bool mdcr_el2_tda = (mdcr_el2 & MDCR_TDA) || (mdcr_el2 & MDCR_TDE) || (arm_hcr_el2_eff(env) & HCR_TGE); - if (el < 2 && mdcr_el2_tda && !arm_is_secure_below_el3(env)) { + if (el < 2 && mdcr_el2_tda) { return CP_ACCESS_TRAP_EL2; } if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { int el = arm_current_el(env); + uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); - if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM) - && !arm_is_secure_below_el3(env)) { + if (el < 2 && (mdcr_el2 & MDCR_TPM)) { return CP_ACCESS_TRAP_EL2; } if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, * trapping to EL2 or EL3 for other accesses. */ int el = arm_current_el(env); + uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); if (el == 0 && !(env->cp15.c9_pmuserenr & 1)) { return CP_ACCESS_TRAP; } - if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM) - && !arm_is_secure_below_el3(env)) { + if (el < 2 && (mdcr_el2 & MDCR_TPM)) { return CP_ACCESS_TRAP_EL2; } if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) { @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) bool enabled, prohibited, filtered; bool secure = arm_is_secure(env); int el = arm_current_el(env); - uint8_t hpmn = env->cp15.mdcr_el2 & MDCR_HPMN; + uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); + uint8_t hpmn = mdcr_el2 & MDCR_HPMN; if (!arm_feature(env, ARM_FEATURE_PMU)) { return false; @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) (counter < hpmn || counter == 31)) { e = env->cp15.c9_pmcr & PMCRE; } else { - e = env->cp15.mdcr_el2 & MDCR_HPME; + e = mdcr_el2 & MDCR_HPME; } enabled = e && (env->cp15.c9_pmcnten & (1 << counter)); if (!secure) { if (el == 2 && (counter < hpmn || counter == 31)) { - prohibited = env->cp15.mdcr_el2 & MDCR_HPMD; + prohibited = mdcr_el2 & MDCR_HPMD; } else { prohibited = false; } -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-6-remi.denis.courmont@huawei.com [PMM: tweaked commit message to match reduced scope of patch following rebase] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_sve(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, SVE) != 0; } +static inline bool isar_feature_aa64_sel2(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, SEL2) != 0; +} + static inline bool isar_feature_aa64_vh(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, VH) != 0; -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> With the ARMv8.4-SEL2 extension, EL2 is a legal exception level in secure mode, though it can only be AArch64. This patch adds the target EL for exceptions from 64-bit S-EL2. It also fixes the target EL to EL2 when HCR.{A,F,I}MO are set in secure mode. Those values were never used in practice as the effective value of HCR was always 0 in secure mode. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-7-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 10 +++++----- target/arm/op_helper.c | 4 ++-- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const int8_t target_el_table[2][2][2][2][2][4] = { {{/* 0 1 1 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },}, {/* 0 1 1 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},},},}, {{{{/* 1 0 0 0 */{ 1, 1, 2, -1 },{ 1, 1, -1, 1 },}, - {/* 1 0 0 1 */{ 2, 2, 2, -1 },{ 1, 1, -1, 1 },},}, - {{/* 1 0 1 0 */{ 1, 1, 1, -1 },{ 1, 1, -1, 1 },}, - {/* 1 0 1 1 */{ 2, 2, 2, -1 },{ 1, 1, -1, 1 },},},}, + {/* 1 0 0 1 */{ 2, 2, 2, -1 },{ 2, 2, -1, 1 },},}, + {{/* 1 0 1 0 */{ 1, 1, 1, -1 },{ 1, 1, 1, 1 },}, + {/* 1 0 1 1 */{ 2, 2, 2, -1 },{ 2, 2, 2, 1 },},},}, {{{/* 1 1 0 0 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },}, {/* 1 1 0 1 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},}, - {{/* 1 1 1 0 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },}, - {/* 1 1 1 1 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},},},}, + {{/* 1 1 1 0 */{ 3, 3, 3, -1 },{ 3, 3, 3, 3 },}, + {/* 1 1 1 1 */{ 3, 3, 3, -1 },{ 3, 3, 3, 3 },},},},}, }; /* diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(access_check_cp_reg)(CPUARMState *env, void *rip, uint32_t syndrome, target_el = exception_target_el(env); break; case CP_ACCESS_TRAP_EL2: - /* Requesting a trap to EL2 when we're in EL3 or S-EL0/1 is + /* Requesting a trap to EL2 when we're in EL3 is * a bug in the access function. */ - assert(!arm_is_secure(env) && arm_current_el(env) != 3); + assert(arm_current_el(env) != 3); target_el = 2; break; case CP_ACCESS_TRAP_EL3: -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> This adds the MMU indices for EL2 stage 1 in secure state. To keep code contained, which is largelly identical between secure and non-secure modes, the MMU indices are reassigned. The new assignments provide a systematic pattern with a non-secure bit. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-8-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu-param.h | 2 +- target/arm/cpu.h | 35 ++++++---- target/arm/internals.h | 12 ++++ target/arm/helper.c | 127 ++++++++++++++++++++++++------------- target/arm/translate-a64.c | 4 ++ 5 files changed, 123 insertions(+), 57 deletions(-) diff --git a/target/arm/cpu-param.h b/target/arm/cpu-param.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-param.h +++ b/target/arm/cpu-param.h @@ -XXX,XX +XXX,XX @@ # define TARGET_PAGE_BITS_MIN 10 #endif -#define NB_MMU_MODES 11 +#define NB_MMU_MODES 15 #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync); #define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ #define ARM_MMU_IDX_M 0x40 /* M profile */ +/* Meanings of the bits for A profile mmu idx values */ +#define ARM_MMU_IDX_A_NS 0x8 + /* Meanings of the bits for M profile mmu idx values */ #define ARM_MMU_IDX_M_PRIV 0x1 #define ARM_MMU_IDX_M_NEGPRI 0x2 @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { /* * A-profile. */ - ARMMMUIdx_E10_0 = 0 | ARM_MMU_IDX_A, - ARMMMUIdx_E20_0 = 1 | ARM_MMU_IDX_A, + ARMMMUIdx_SE10_0 = 0 | ARM_MMU_IDX_A, + ARMMMUIdx_SE20_0 = 1 | ARM_MMU_IDX_A, + ARMMMUIdx_SE10_1 = 2 | ARM_MMU_IDX_A, + ARMMMUIdx_SE20_2 = 3 | ARM_MMU_IDX_A, + ARMMMUIdx_SE10_1_PAN = 4 | ARM_MMU_IDX_A, + ARMMMUIdx_SE20_2_PAN = 5 | ARM_MMU_IDX_A, + ARMMMUIdx_SE2 = 6 | ARM_MMU_IDX_A, + ARMMMUIdx_SE3 = 7 | ARM_MMU_IDX_A, - ARMMMUIdx_E10_1 = 2 | ARM_MMU_IDX_A, - ARMMMUIdx_E10_1_PAN = 3 | ARM_MMU_IDX_A, - - ARMMMUIdx_E2 = 4 | ARM_MMU_IDX_A, - ARMMMUIdx_E20_2 = 5 | ARM_MMU_IDX_A, - ARMMMUIdx_E20_2_PAN = 6 | ARM_MMU_IDX_A, - - ARMMMUIdx_SE10_0 = 7 | ARM_MMU_IDX_A, - ARMMMUIdx_SE10_1 = 8 | ARM_MMU_IDX_A, - ARMMMUIdx_SE10_1_PAN = 9 | ARM_MMU_IDX_A, - ARMMMUIdx_SE3 = 10 | ARM_MMU_IDX_A, + ARMMMUIdx_E10_0 = ARMMMUIdx_SE10_0 | ARM_MMU_IDX_A_NS, + ARMMMUIdx_E20_0 = ARMMMUIdx_SE20_0 | ARM_MMU_IDX_A_NS, + ARMMMUIdx_E10_1 = ARMMMUIdx_SE10_1 | ARM_MMU_IDX_A_NS, + ARMMMUIdx_E20_2 = ARMMMUIdx_SE20_2 | ARM_MMU_IDX_A_NS, + ARMMMUIdx_E10_1_PAN = ARMMMUIdx_SE10_1_PAN | ARM_MMU_IDX_A_NS, + ARMMMUIdx_E20_2_PAN = ARMMMUIdx_SE20_2_PAN | ARM_MMU_IDX_A_NS, + ARMMMUIdx_E2 = ARMMMUIdx_SE2 | ARM_MMU_IDX_A_NS, /* * These are not allocated TLBs and are used only for AT system @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { TO_CORE_BIT(E20_2), TO_CORE_BIT(E20_2_PAN), TO_CORE_BIT(SE10_0), + TO_CORE_BIT(SE20_0), TO_CORE_BIT(SE10_1), + TO_CORE_BIT(SE20_2), TO_CORE_BIT(SE10_1_PAN), + TO_CORE_BIT(SE20_2_PAN), + TO_CORE_BIT(SE2), TO_CORE_BIT(SE3), TO_CORE_BIT(MUser), diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline bool regime_has_2_ranges(ARMMMUIdx mmu_idx) case ARMMMUIdx_SE10_0: case ARMMMUIdx_SE10_1: case ARMMMUIdx_SE10_1_PAN: + case ARMMMUIdx_SE20_0: + case ARMMMUIdx_SE20_2: + case ARMMMUIdx_SE20_2_PAN: return true; default: return false; @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_SE10_0: case ARMMMUIdx_SE10_1: case ARMMMUIdx_SE10_1_PAN: + case ARMMMUIdx_SE20_0: + case ARMMMUIdx_SE20_2: + case ARMMMUIdx_SE20_2_PAN: + case ARMMMUIdx_SE2: case ARMMMUIdx_MSPrivNegPri: case ARMMMUIdx_MSUserNegPri: case ARMMMUIdx_MSPriv: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_pan(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_E10_1_PAN: case ARMMMUIdx_E20_2_PAN: case ARMMMUIdx_SE10_1_PAN: + case ARMMMUIdx_SE20_2_PAN: return true; default: return false; @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_pan(CPUARMState *env, ARMMMUIdx mmu_idx) static inline uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx) { switch (mmu_idx) { + case ARMMMUIdx_SE20_0: + case ARMMMUIdx_SE20_2: + case ARMMMUIdx_SE20_2_PAN: case ARMMMUIdx_E20_0: case ARMMMUIdx_E20_2: case ARMMMUIdx_E20_2_PAN: case ARMMMUIdx_Stage2: + case ARMMMUIdx_SE2: case ARMMMUIdx_E2: return 2; case ARMMMUIdx_SE3: diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static int gt_phys_redir_timeridx(CPUARMState *env) case ARMMMUIdx_E20_0: case ARMMMUIdx_E20_2: case ARMMMUIdx_E20_2_PAN: + case ARMMMUIdx_SE20_0: + case ARMMMUIdx_SE20_2: + case ARMMMUIdx_SE20_2_PAN: return GTIMER_HYP; default: return GTIMER_PHYS; @@ -XXX,XX +XXX,XX @@ static int gt_virt_redir_timeridx(CPUARMState *env) case ARMMMUIdx_E20_0: case ARMMMUIdx_E20_2: case ARMMMUIdx_E20_2_PAN: + case ARMMMUIdx_SE20_0: + case ARMMMUIdx_SE20_2: + case ARMMMUIdx_SE20_2_PAN: return GTIMER_HYPVIRT; default: return GTIMER_VIRT; @@ -XXX,XX +XXX,XX @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) mmu_idx = ARMMMUIdx_SE3; break; case 2: - g_assert(!secure); /* TODO: ARMv8.4-SecEL2 */ + g_assert(!secure); /* ARMv8.4-SecEL2 is 64-bit only */ /* fall through */ case 1: if (ri->crm == 9 && (env->uncached_cpsr & CPSR_PAN)) { @@ -XXX,XX +XXX,XX @@ static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri, } break; case 4: /* AT S1E2R, AT S1E2W */ - mmu_idx = ARMMMUIdx_E2; + mmu_idx = secure ? ARMMMUIdx_SE2 : ARMMMUIdx_E2; break; case 6: /* AT S1E3R, AT S1E3W */ mmu_idx = ARMMMUIdx_SE3; @@ -XXX,XX +XXX,XX @@ static void vmsa_tcr_ttbr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, */ if (extract64(raw_read(env, ri) ^ value, 48, 16) && (arm_hcr_el2_eff(env) & HCR_E2H)) { - tlb_flush_by_mmuidx(env_cpu(env), - ARMMMUIdxBit_E20_2 | - ARMMMUIdxBit_E20_2_PAN | - ARMMMUIdxBit_E20_0); + uint16_t mask = ARMMMUIdxBit_E20_2 | + ARMMMUIdxBit_E20_2_PAN | + ARMMMUIdxBit_E20_0; + + if (arm_is_secure_below_el3(env)) { + mask >>= ARM_MMU_IDX_A_NS; + } + + tlb_flush_by_mmuidx(env_cpu(env), mask); } raw_write(env, ri, value); } @@ -XXX,XX +XXX,XX @@ static int vae1_tlbmask(CPUARMState *env) uint64_t hcr = arm_hcr_el2_eff(env); if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { - return ARMMMUIdxBit_E20_2 | - ARMMMUIdxBit_E20_2_PAN | - ARMMMUIdxBit_E20_0; + uint16_t mask = ARMMMUIdxBit_E20_2 | + ARMMMUIdxBit_E20_2_PAN | + ARMMMUIdxBit_E20_0; + + if (arm_is_secure_below_el3(env)) { + mask >>= ARM_MMU_IDX_A_NS; + } + + return mask; } else if (arm_is_secure_below_el3(env)) { return ARMMMUIdxBit_SE10_1 | ARMMMUIdxBit_SE10_1_PAN | @@ -XXX,XX +XXX,XX @@ static int tlbbits_for_regime(CPUARMState *env, ARMMMUIdx mmu_idx, static int vae1_tlbbits(CPUARMState *env, uint64_t addr) { + uint64_t hcr = arm_hcr_el2_eff(env); ARMMMUIdx mmu_idx; /* Only the regime of the mmu_idx below is significant. */ - if (arm_is_secure_below_el3(env)) { - mmu_idx = ARMMMUIdx_SE10_0; - } else if ((env->cp15.hcr_el2 & (HCR_E2H | HCR_TGE)) - == (HCR_E2H | HCR_TGE)) { + if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { mmu_idx = ARMMMUIdx_E20_0; } else { mmu_idx = ARMMMUIdx_E10_0; } + + if (arm_is_secure_below_el3(env)) { + mmu_idx &= ~ARM_MMU_IDX_A_NS; + } + return tlbbits_for_regime(env, mmu_idx, addr); } @@ -XXX,XX +XXX,XX @@ static int alle1_tlbmask(CPUARMState *env) static int e2_tlbmask(CPUARMState *env) { - /* TODO: ARMv8.4-SecEL2 */ - return ARMMMUIdxBit_E20_0 | - ARMMMUIdxBit_E20_2 | - ARMMMUIdxBit_E20_2_PAN | - ARMMMUIdxBit_E2; + if (arm_is_secure_below_el3(env)) { + return ARMMMUIdxBit_SE20_0 | + ARMMMUIdxBit_SE20_2 | + ARMMMUIdxBit_SE20_2_PAN | + ARMMMUIdxBit_SE2; + } else { + return ARMMMUIdxBit_E20_0 | + ARMMMUIdxBit_E20_2 | + ARMMMUIdxBit_E20_2_PAN | + ARMMMUIdxBit_E2; + } } static void tlbi_aa64_alle1_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = env_cpu(env); uint64_t pageaddr = sextract64(value << 12, 0, 56); - int bits = tlbbits_for_regime(env, ARMMMUIdx_E2, pageaddr); + bool secure = arm_is_secure_below_el3(env); + int mask = secure ? ARMMMUIdxBit_SE2 : ARMMMUIdxBit_E2; + int bits = tlbbits_for_regime(env, secure ? ARMMMUIdx_E2 : ARMMMUIdx_SE2, + pageaddr); - tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, - ARMMMUIdxBit_E2, bits); + tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, mask, bits); } static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ uint64_t arm_sctlr(CPUARMState *env, int el) /* Only EL0 needs to be adjusted for EL1&0 or EL2&0. */ if (el == 0) { ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, 0); - el = (mmu_idx == ARMMMUIdx_E20_0 ? 2 : 1); + el = (mmu_idx == ARMMMUIdx_E20_0 || mmu_idx == ARMMMUIdx_SE20_0) + ? 2 : 1; } return env->cp15.sctlr_el[el]; } @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_user(CPUARMState *env, ARMMMUIdx mmu_idx) switch (mmu_idx) { case ARMMMUIdx_SE10_0: case ARMMMUIdx_E20_0: + case ARMMMUIdx_SE20_0: case ARMMMUIdx_Stage1_E0: case ARMMMUIdx_MUser: case ARMMMUIdx_MSUser: @@ -XXX,XX +XXX,XX @@ int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) case ARMMMUIdx_E10_0: case ARMMMUIdx_E20_0: case ARMMMUIdx_SE10_0: + case ARMMMUIdx_SE20_0: return 0; case ARMMMUIdx_E10_1: case ARMMMUIdx_E10_1_PAN: @@ -XXX,XX +XXX,XX @@ int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) case ARMMMUIdx_E2: case ARMMMUIdx_E20_2: case ARMMMUIdx_E20_2_PAN: + case ARMMMUIdx_SE2: + case ARMMMUIdx_SE20_2: + case ARMMMUIdx_SE20_2_PAN: return 2; case ARMMMUIdx_SE3: return 3; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el) { + ARMMMUIdx idx; + uint64_t hcr; + if (arm_feature(env, ARM_FEATURE_M)) { return arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el) /* See ARM pseudo-function ELIsInHost. */ switch (el) { case 0: - if (arm_is_secure_below_el3(env)) { - return ARMMMUIdx_SE10_0; + hcr = arm_hcr_el2_eff(env); + if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { + idx = ARMMMUIdx_E20_0; + } else { + idx = ARMMMUIdx_E10_0; } - if ((env->cp15.hcr_el2 & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE) - && arm_el_is_aa64(env, 2)) { - return ARMMMUIdx_E20_0; - } - return ARMMMUIdx_E10_0; + break; case 1: - if (arm_is_secure_below_el3(env)) { - if (env->pstate & PSTATE_PAN) { - return ARMMMUIdx_SE10_1_PAN; - } - return ARMMMUIdx_SE10_1; - } if (env->pstate & PSTATE_PAN) { - return ARMMMUIdx_E10_1_PAN; + idx = ARMMMUIdx_E10_1_PAN; + } else { + idx = ARMMMUIdx_E10_1; } - return ARMMMUIdx_E10_1; + break; case 2: - /* TODO: ARMv8.4-SecEL2 */ /* Note that TGE does not apply at EL2. */ - if ((env->cp15.hcr_el2 & HCR_E2H) && arm_el_is_aa64(env, 2)) { + if (arm_hcr_el2_eff(env) & HCR_E2H) { if (env->pstate & PSTATE_PAN) { - return ARMMMUIdx_E20_2_PAN; + idx = ARMMMUIdx_E20_2_PAN; + } else { + idx = ARMMMUIdx_E20_2; } - return ARMMMUIdx_E20_2; + } else { + idx = ARMMMUIdx_E2; } - return ARMMMUIdx_E2; + break; case 3: return ARMMMUIdx_SE3; default: g_assert_not_reached(); } + + if (arm_is_secure_below_el3(env)) { + idx &= ~ARM_MMU_IDX_A_NS; + } + + return idx; } ARMMMUIdx arm_mmu_idx(CPUARMState *env) @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, break; case ARMMMUIdx_E20_2: case ARMMMUIdx_E20_2_PAN: - /* TODO: ARMv8.4-SecEL2 */ + case ARMMMUIdx_SE20_2: + case ARMMMUIdx_SE20_2_PAN: /* * Note that EL20_2 is gated by HCR_EL2.E2H == 1, but EL20_0 is * gated by HCR_EL2.<E2H,TGE> == '11', and so is LDTR. diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static int get_a64_user_mem_index(DisasContext *s) case ARMMMUIdx_SE10_1_PAN: useridx = ARMMMUIdx_SE10_0; break; + case ARMMMUIdx_SE20_2: + case ARMMMUIdx_SE20_2_PAN: + useridx = ARMMMUIdx_SE20_0; + break; default: g_assert_not_reached(); } -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-9-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 24 ++++++++++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t base_mask; } TCR; +#define VTCR_NSW (1u << 29) +#define VTCR_NSA (1u << 30) +#define VSTCR_SW VTCR_NSW +#define VSTCR_SA VTCR_NSA + /* Define a maximum sized vector register. * For 32-bit, this is a 128-bit NEON/AdvSIMD register. * For 64-bit, this is a 2048-bit SVE register. @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint64_t ttbr1_el[4]; }; uint64_t vttbr_el2; /* Virtualization Translation Table Base. */ + uint64_t vsttbr_el2; /* Secure Virtualization Translation Table. */ /* MMU translation table base control. */ TCR tcr_el[4]; TCR vtcr_el2; /* Virtualization Translation Control. */ + TCR vstcr_el2; /* Secure Virtualization Translation Control. */ uint32_t c2_data; /* MPU data cacheable bits. */ uint32_t c2_insn; /* MPU instruction cacheable bits. */ union { /* MMU domain access control register diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_v8_cp_reginfo[] = { REGINFO_SENTINEL }; +static CPAccessResult sel2_access(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 3 || arm_is_secure_below_el3(env)) { + return CP_ACCESS_OK; + } + return CP_ACCESS_TRAP_UNCATEGORIZED; +} + +static const ARMCPRegInfo el2_sec_cp_reginfo[] = { + { .name = "VSTTBR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 0, + .access = PL2_RW, .accessfn = sel2_access, + .fieldoffset = offsetof(CPUARMState, cp15.vsttbr_el2) }, + { .name = "VSTCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 2, + .access = PL2_RW, .accessfn = sel2_access, + .fieldoffset = offsetof(CPUARMState, cp15.vstcr_el2) }, + REGINFO_SENTINEL +}; + static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (arm_feature(env, ARM_FEATURE_V8)) { define_arm_cp_regs(cpu, el2_v8_cp_reginfo); } + if (cpu_isar_feature(aa64_sel2, cpu)) { + define_arm_cp_regs(cpu, el2_sec_cp_reginfo); + } /* RVBAR_EL2 is only implemented if EL2 is the highest EL */ if (!arm_feature(env, ARM_FEATURE_EL3)) { ARMCPRegInfo rvbar = { -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> The VTTBR write callback so far assumes that the underlying VM lies in non-secure state. This handles the secure state scenario. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-10-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, * the combined stage 1&2 tlbs (EL10_1 and EL10_0). */ if (raw_read(env, ri) != value) { - tlb_flush_by_mmuidx(cs, - ARMMMUIdxBit_E10_1 | - ARMMMUIdxBit_E10_1_PAN | - ARMMMUIdxBit_E10_0); + uint16_t mask = ARMMMUIdxBit_E10_1 | + ARMMMUIdxBit_E10_1_PAN | + ARMMMUIdxBit_E10_0; + + if (arm_is_secure_below_el3(env)) { + mask >>= ARM_MMU_IDX_A_NS; + } + + tlb_flush_by_mmuidx(cs, mask); raw_write(env, ri, value); } } -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> In the secure stage 2 translation regime, the VSTCR.SW and VTCR.NSW bits can invert the secure flag for pagetable walks. This patchset allows S1_ptw_translate() to change the non-secure bit. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-11-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_level1_table_address(CPUARMState *env, ARMMMUIdx mmu_idx, /* Translate a S1 pagetable walk through S2 if needed. */ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, - hwaddr addr, MemTxAttrs txattrs, + hwaddr addr, bool *is_secure, ARMMMUFaultInfo *fi) { if (arm_mmu_idx_is_stage1_of_2(mmu_idx) && @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, int s2prot; int ret; ARMCacheAttrs cacheattrs = {}; + MemTxAttrs txattrs = {}; + + assert(!*is_secure); /* TODO: S-EL2 */ ret = get_phys_addr_lpae(env, addr, MMU_DATA_LOAD, ARMMMUIdx_Stage2, false, @@ -XXX,XX +XXX,XX @@ static uint32_t arm_ldl_ptw(CPUState *cs, hwaddr addr, bool is_secure, AddressSpace *as; uint32_t data; + addr = S1_ptw_translate(env, mmu_idx, addr, &is_secure, fi); attrs.secure = is_secure; as = arm_addressspace(cs, attrs); - addr = S1_ptw_translate(env, mmu_idx, addr, attrs, fi); if (fi->s1ptw) { return 0; } @@ -XXX,XX +XXX,XX @@ static uint64_t arm_ldq_ptw(CPUState *cs, hwaddr addr, bool is_secure, AddressSpace *as; uint64_t data; + addr = S1_ptw_translate(env, mmu_idx, addr, &is_secure, fi); attrs.secure = is_secure; as = arm_addressspace(cs, attrs); - addr = S1_ptw_translate(env, mmu_idx, addr, attrs, fi); if (fi->s1ptw) { return 0; } -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-12-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, fi->s1ptw = true; return ~0; } + + if (arm_is_secure_below_el3(env)) { + /* Check if page table walk is to secure or non-secure PA space. */ + if (*is_secure) { + *is_secure = !(env->cp15.vstcr_el2.raw_tcr & VSTCR_SW); + } else { + *is_secure = !(env->cp15.vtcr_el2.raw_tcr & VTCR_NSW); + } + } else { + assert(!*is_secure); + } + addr = s2pa; } return addr; -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> The stage_1_mmu_idx() already effectively keeps track of which translation regimes have two stages. Don't hard-code another test. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-13-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, target_ulong *page_size, ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) { - if (mmu_idx == ARMMMUIdx_E10_0 || - mmu_idx == ARMMMUIdx_E10_1 || - mmu_idx == ARMMMUIdx_E10_1_PAN) { + ARMMMUIdx s1_mmu_idx = stage_1_mmu_idx(mmu_idx); + + if (mmu_idx != s1_mmu_idx) { /* Call ourselves recursively to do the stage 1 and then stage 2 - * translations. + * translations if mmu_idx is a two-stage regime. */ if (arm_feature(env, ARM_FEATURE_EL2)) { hwaddr ipa; @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, int ret; ARMCacheAttrs cacheattrs2 = {}; - ret = get_phys_addr(env, address, access_type, - stage_1_mmu_idx(mmu_idx), &ipa, attrs, - prot, page_size, fi, cacheattrs); + ret = get_phys_addr(env, address, access_type, s1_mmu_idx, &ipa, + attrs, prot, page_size, fi, cacheattrs); /* If S1 fails or S2 is disabled, return early. */ if (ret || regime_translation_disabled(env, ARMMMUIdx_Stage2)) { -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-14-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 +++- target/arm/internals.h | 22 ++++++++++++ target/arm/helper.c | 78 +++++++++++++++++++++++++++++------------- 3 files changed, 81 insertions(+), 25 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { ARMMMUIdx_Stage1_E0 = 0 | ARM_MMU_IDX_NOTLB, ARMMMUIdx_Stage1_E1 = 1 | ARM_MMU_IDX_NOTLB, ARMMMUIdx_Stage1_E1_PAN = 2 | ARM_MMU_IDX_NOTLB, + ARMMMUIdx_Stage1_SE0 = 3 | ARM_MMU_IDX_NOTLB, + ARMMMUIdx_Stage1_SE1 = 4 | ARM_MMU_IDX_NOTLB, + ARMMMUIdx_Stage1_SE1_PAN = 5 | ARM_MMU_IDX_NOTLB, /* * Not allocated a TLB: used only for second stage of an S12 page * table walk, or for descriptor loads during first stage of an S1 @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { * then various TLB flush insns which currently are no-ops or flush * only stage 1 MMU indexes will need to change to flush stage 2. */ - ARMMMUIdx_Stage2 = 3 | ARM_MMU_IDX_NOTLB, + ARMMMUIdx_Stage2 = 6 | ARM_MMU_IDX_NOTLB, + ARMMMUIdx_Stage2_S = 7 | ARM_MMU_IDX_NOTLB, /* * M-profile. diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline bool regime_has_2_ranges(ARMMMUIdx mmu_idx) case ARMMMUIdx_Stage1_E0: case ARMMMUIdx_Stage1_E1: case ARMMMUIdx_Stage1_E1_PAN: + case ARMMMUIdx_Stage1_SE0: + case ARMMMUIdx_Stage1_SE1: + case ARMMMUIdx_Stage1_SE1_PAN: case ARMMMUIdx_E10_0: case ARMMMUIdx_E10_1: case ARMMMUIdx_E10_1_PAN: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_SE20_0: case ARMMMUIdx_SE20_2: case ARMMMUIdx_SE20_2_PAN: + case ARMMMUIdx_Stage1_SE0: + case ARMMMUIdx_Stage1_SE1: + case ARMMMUIdx_Stage1_SE1_PAN: case ARMMMUIdx_SE2: + case ARMMMUIdx_Stage2_S: case ARMMMUIdx_MSPrivNegPri: case ARMMMUIdx_MSUserNegPri: case ARMMMUIdx_MSPriv: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_pan(CPUARMState *env, ARMMMUIdx mmu_idx) { switch (mmu_idx) { case ARMMMUIdx_Stage1_E1_PAN: + case ARMMMUIdx_Stage1_SE1_PAN: case ARMMMUIdx_E10_1_PAN: case ARMMMUIdx_E20_2_PAN: case ARMMMUIdx_SE10_1_PAN: @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_E20_2: case ARMMMUIdx_E20_2_PAN: case ARMMMUIdx_Stage2: + case ARMMMUIdx_Stage2_S: case ARMMMUIdx_SE2: case ARMMMUIdx_E2: return 2; case ARMMMUIdx_SE3: return 3; case ARMMMUIdx_SE10_0: + case ARMMMUIdx_Stage1_SE0: return arm_el_is_aa64(env, 3) ? 1 : 3; case ARMMMUIdx_SE10_1: case ARMMMUIdx_SE10_1_PAN: case ARMMMUIdx_Stage1_E0: case ARMMMUIdx_Stage1_E1: case ARMMMUIdx_Stage1_E1_PAN: + case ARMMMUIdx_Stage1_SE1: + case ARMMMUIdx_Stage1_SE1_PAN: case ARMMMUIdx_E10_0: case ARMMMUIdx_E10_1: case ARMMMUIdx_E10_1_PAN: @@ -XXX,XX +XXX,XX @@ static inline TCR *regime_tcr(CPUARMState *env, ARMMMUIdx mmu_idx) if (mmu_idx == ARMMMUIdx_Stage2) { return &env->cp15.vtcr_el2; } + if (mmu_idx == ARMMMUIdx_Stage2_S) { + /* + * Note: Secure stage 2 nominally shares fields from VTCR_EL2, but + * those are not currently used by QEMU, so just return VSTCR_EL2. + */ + return &env->cp15.vstcr_el2; + } return &env->cp15.tcr_el[regime_el(env, mmu_idx)]; } @@ -XXX,XX +XXX,XX @@ static inline bool arm_mmu_idx_is_stage1_of_2(ARMMMUIdx mmu_idx) case ARMMMUIdx_Stage1_E0: case ARMMMUIdx_Stage1_E1: case ARMMMUIdx_Stage1_E1_PAN: + case ARMMMUIdx_Stage1_SE0: + case ARMMMUIdx_Stage1_SE1: + case ARMMMUIdx_Stage1_SE1_PAN: return true; default: return false; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value, uint32_t syn, fsr, fsc; bool take_exc = false; - if (fi.s1ptw && current_el == 1 && !arm_is_secure(env) + if (fi.s1ptw && current_el == 1 && arm_mmu_idx_is_stage1_of_2(mmu_idx)) { /* * Synchronous stage 2 fault on an access made as part of the @@ -XXX,XX +XXX,XX @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) /* fall through */ case 1: if (ri->crm == 9 && (env->uncached_cpsr & CPSR_PAN)) { - mmu_idx = (secure ? ARMMMUIdx_SE10_1_PAN + mmu_idx = (secure ? ARMMMUIdx_Stage1_SE1_PAN : ARMMMUIdx_Stage1_E1_PAN); } else { - mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_Stage1_E1; + mmu_idx = secure ? ARMMMUIdx_Stage1_SE1 : ARMMMUIdx_Stage1_E1; } break; default: @@ -XXX,XX +XXX,XX @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) mmu_idx = ARMMMUIdx_SE10_0; break; case 2: + g_assert(!secure); /* ARMv8.4-SecEL2 is 64-bit only */ mmu_idx = ARMMMUIdx_Stage1_E0; break; case 1: - mmu_idx = secure ? ARMMMUIdx_SE10_0 : ARMMMUIdx_Stage1_E0; + mmu_idx = secure ? ARMMMUIdx_Stage1_SE0 : ARMMMUIdx_Stage1_E0; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri, switch (ri->opc1) { case 0: /* AT S1E1R, AT S1E1W, AT S1E1RP, AT S1E1WP */ if (ri->crm == 9 && (env->pstate & PSTATE_PAN)) { - mmu_idx = (secure ? ARMMMUIdx_SE10_1_PAN + mmu_idx = (secure ? ARMMMUIdx_Stage1_SE1_PAN : ARMMMUIdx_Stage1_E1_PAN); } else { - mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_Stage1_E1; + mmu_idx = secure ? ARMMMUIdx_Stage1_SE1 : ARMMMUIdx_Stage1_E1; } break; case 4: /* AT S1E2R, AT S1E2W */ @@ -XXX,XX +XXX,XX @@ static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri, } break; case 2: /* AT S1E0R, AT S1E0W */ - mmu_idx = secure ? ARMMMUIdx_SE10_0 : ARMMMUIdx_Stage1_E0; + mmu_idx = secure ? ARMMMUIdx_Stage1_SE0 : ARMMMUIdx_Stage1_E0; break; case 4: /* AT S12E1R, AT S12E1W */ mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_E10_1; @@ -XXX,XX +XXX,XX @@ static inline bool regime_translation_disabled(CPUARMState *env, hcr_el2 = arm_hcr_el2_eff(env); - if (mmu_idx == ARMMMUIdx_Stage2) { + if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { /* HCR.DC means HCR.VM behaves as 1 */ return (hcr_el2 & (HCR_DC | HCR_VM)) == 0; } @@ -XXX,XX +XXX,XX @@ static inline uint64_t regime_ttbr(CPUARMState *env, ARMMMUIdx mmu_idx, if (mmu_idx == ARMMMUIdx_Stage2) { return env->cp15.vttbr_el2; } + if (mmu_idx == ARMMMUIdx_Stage2_S) { + return env->cp15.vsttbr_el2; + } if (ttbrn == 0) { return env->cp15.ttbr0_el[regime_el(env, mmu_idx)]; } else { @@ -XXX,XX +XXX,XX @@ static inline uint64_t regime_ttbr(CPUARMState *env, ARMMMUIdx mmu_idx, static inline ARMMMUIdx stage_1_mmu_idx(ARMMMUIdx mmu_idx) { switch (mmu_idx) { + case ARMMMUIdx_SE10_0: + return ARMMMUIdx_Stage1_SE0; + case ARMMMUIdx_SE10_1: + return ARMMMUIdx_Stage1_SE1; + case ARMMMUIdx_SE10_1_PAN: + return ARMMMUIdx_Stage1_SE1_PAN; case ARMMMUIdx_E10_0: return ARMMMUIdx_Stage1_E0; case ARMMMUIdx_E10_1: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_user(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_E20_0: case ARMMMUIdx_SE20_0: case ARMMMUIdx_Stage1_E0: + case ARMMMUIdx_Stage1_SE0: case ARMMMUIdx_MUser: case ARMMMUIdx_MSUser: case ARMMMUIdx_MUserNegPri: @@ -XXX,XX +XXX,XX @@ static int get_S1prot(CPUARMState *env, ARMMMUIdx mmu_idx, bool is_aa64, int wxn = 0; assert(mmu_idx != ARMMMUIdx_Stage2); + assert(mmu_idx != ARMMMUIdx_Stage2_S); user_rw = simple_ap_to_rw_prot_is_user(ap, true); if (is_user) { @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, hwaddr s2pa; int s2prot; int ret; + ARMMMUIdx s2_mmu_idx = *is_secure ? ARMMMUIdx_Stage2_S + : ARMMMUIdx_Stage2; ARMCacheAttrs cacheattrs = {}; MemTxAttrs txattrs = {}; - assert(!*is_secure); /* TODO: S-EL2 */ - - ret = get_phys_addr_lpae(env, addr, MMU_DATA_LOAD, ARMMMUIdx_Stage2, - false, + ret = get_phys_addr_lpae(env, addr, MMU_DATA_LOAD, s2_mmu_idx, false, &s2pa, &txattrs, &s2prot, &s2size, fi, &cacheattrs); if (ret) { @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx) { if (regime_has_2_ranges(mmu_idx)) { return extract64(tcr, 37, 2); - } else if (mmu_idx == ARMMMUIdx_Stage2) { + } else if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { return 0; /* VTCR_EL2 */ } else { /* Replicate the single TBI bit so we always have 2 bits. */ @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx) { if (regime_has_2_ranges(mmu_idx)) { return extract64(tcr, 51, 2); - } else if (mmu_idx == ARMMMUIdx_Stage2) { + } else if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { return 0; /* VTCR_EL2 */ } else { /* Replicate the single TBID bit so we always have 2 bits. */ @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, tsz = extract32(tcr, 0, 6); using64k = extract32(tcr, 14, 1); using16k = extract32(tcr, 15, 1); - if (mmu_idx == ARMMMUIdx_Stage2) { + if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { /* VTCR_EL2 */ hpd = false; } else { @@ -XXX,XX +XXX,XX @@ static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va, int select, tsz; bool epd, hpd; + assert(mmu_idx != ARMMMUIdx_Stage2_S); + if (mmu_idx == ARMMMUIdx_Stage2) { /* VTCR */ bool sext = extract32(tcr, 4, 1); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, goto do_fault; } - if (mmu_idx != ARMMMUIdx_Stage2) { + if (mmu_idx != ARMMMUIdx_Stage2 && mmu_idx != ARMMMUIdx_Stage2_S) { /* The starting level depends on the virtual address size (which can * be up to 48 bits) and the translation granule size. It indicates * the number of strides (stride bits at a time) needed to @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, attrs = extract64(descriptor, 2, 10) | (extract64(descriptor, 52, 12) << 10); - if (mmu_idx == ARMMMUIdx_Stage2) { + if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { /* Stage 2 table descriptors do not include any attribute fields */ break; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, ap = extract32(attrs, 4, 2); - if (mmu_idx == ARMMMUIdx_Stage2) { - ns = true; + if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { + ns = mmu_idx == ARMMMUIdx_Stage2; xn = extract32(attrs, 11, 2); *prot = get_S2prot(env, ap, xn, s1_is_el0); } else { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, arm_tlb_bti_gp(txattrs) = true; } - if (mmu_idx == ARMMMUIdx_Stage2) { + if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { cacheattrs->attrs = convert_stage2_attrs(env, extract32(attrs, 0, 4)); } else { /* Index into MAIR registers for cache attributes */ @@ -XXX,XX +XXX,XX @@ do_fault: fi->type = fault_type; fi->level = level; /* Tag the error as S2 for failed S1 PTW at S2 or ordinary S2. */ - fi->stage2 = fi->s1ptw || (mmu_idx == ARMMMUIdx_Stage2); + fi->stage2 = fi->s1ptw || (mmu_idx == ARMMMUIdx_Stage2 || + mmu_idx == ARMMMUIdx_Stage2_S); return true; } @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, int s2_prot; int ret; ARMCacheAttrs cacheattrs2 = {}; + ARMMMUIdx s2_mmu_idx; + bool is_el0; ret = get_phys_addr(env, address, access_type, s1_mmu_idx, &ipa, attrs, prot, page_size, fi, cacheattrs); @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, return ret; } + s2_mmu_idx = attrs->secure ? ARMMMUIdx_Stage2_S : ARMMMUIdx_Stage2; + is_el0 = mmu_idx == ARMMMUIdx_E10_0 || mmu_idx == ARMMMUIdx_SE10_0; + /* S1 is done. Now do S2 translation. */ - ret = get_phys_addr_lpae(env, ipa, access_type, ARMMMUIdx_Stage2, - mmu_idx == ARMMMUIdx_E10_0, + ret = get_phys_addr_lpae(env, ipa, access_type, s2_mmu_idx, is_el0, phys_ptr, attrs, &s2_prot, page_size, fi, &cacheattrs2); fi->s2addr = ipa; @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, cacheattrs->shareability = 0; } *cacheattrs = combine_cacheattrs(*cacheattrs, cacheattrs2); + + /* Check if IPA translates to secure or non-secure PA space. */ + if (arm_is_secure_below_el3(env)) { + if (attrs->secure) { + attrs->secure = + !(env->cp15.vstcr_el2.raw_tcr & (VSTCR_SA | VSTCR_SW)); + } else { + attrs->secure = + !((env->cp15.vtcr_el2.raw_tcr & (VTCR_NSA | VTCR_NSW)) + || (env->cp15.vstcr_el2.raw_tcr & VSTCR_SA)); + } + } return 0; } else { /* @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, * MMU disabled. S1 addresses within aa64 translation regimes are * still checked for bounds -- see AArch64.TranslateAddressS1Off. */ - if (mmu_idx != ARMMMUIdx_Stage2) { + if (mmu_idx != ARMMMUIdx_Stage2 && mmu_idx != ARMMMUIdx_Stage2_S) { int r_el = regime_el(env, mmu_idx); if (arm_el_is_aa64(env, r_el)) { int pamax = arm_pamax(env_archcpu(env)); -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-15-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 2 ++ target/arm/helper.c | 6 ++++++ target/arm/tlb_helper.c | 3 +++ 4 files changed, 13 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_TWEDEN (1ULL << 59) #define HCR_TWEDEL MAKE_64BIT_MASK(60, 4) +#define HPFAR_NS (1ULL << 63) + #define SCR_NS (1U << 0) #define SCR_IRQ (1U << 1) #define SCR_FIQ (1U << 2) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ typedef enum ARMFaultType { * @s2addr: Address that caused a fault at stage 2 * @stage2: True if we faulted at stage 2 * @s1ptw: True if we faulted at stage 2 while doing a stage 1 page-table walk + * @s1ns: True if we faulted on a non-secure IPA while in secure state * @ea: True if we should set the EA (external abort type) bit in syndrome */ typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; @@ -XXX,XX +XXX,XX @@ struct ARMMMUFaultInfo { int domain; bool stage2; bool s1ptw; + bool s1ns; bool ea; }; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value, target_el = 3; } else { env->cp15.hpfar_el2 = extract64(fi.s2addr, 12, 47) << 4; + if (arm_is_secure_below_el3(env) && fi.s1ns) { + env->cp15.hpfar_el2 |= HPFAR_NS; + } target_el = 2; } take_exc = true; @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, fi->s2addr = addr; fi->stage2 = true; fi->s1ptw = true; + fi->s1ns = !*is_secure; return ~0; } if ((arm_hcr_el2_eff(env) & HCR_PTW) && @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, fi->s2addr = addr; fi->stage2 = true; fi->s1ptw = true; + fi->s1ns = !*is_secure; return ~0; } @@ -XXX,XX +XXX,XX @@ do_fault: /* Tag the error as S2 for failed S1 PTW at S2 or ordinary S2. */ fi->stage2 = fi->s1ptw || (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S); + fi->s1ns = mmu_idx == ARMMMUIdx_Stage2; return true; } diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, if (fi->stage2) { target_el = 2; env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + if (arm_is_secure_below_el3(env) && fi->s1ns) { + env->cp15.hpfar_el2 |= HPFAR_NS; + } } same_el = (arm_current_el(env) == target_el); -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> On ARMv8-A, accesses by 32-bit secure EL1 to monitor registers trap to the upper (64-bit) EL. With Secure EL2 support, we can no longer assume that that is always EL3, so make room for the value to be computed at run-time. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-16-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void unallocated_encoding(DisasContext *s) default_exception_el(s)); } +static void gen_exception_el(DisasContext *s, int excp, uint32_t syn, + TCGv_i32 tcg_el) +{ + TCGv_i32 tcg_excp; + TCGv_i32 tcg_syn; + + gen_set_condexec(s); + gen_set_pc_im(s, s->pc_curr); + tcg_excp = tcg_const_i32(excp); + tcg_syn = tcg_const_i32(syn); + gen_helper_exception_with_syndrome(cpu_env, tcg_excp, tcg_syn, tcg_el); + tcg_temp_free_i32(tcg_syn); + tcg_temp_free_i32(tcg_excp); + s->base.is_jmp = DISAS_NORETURN; +} + /* Force a TB lookup after an instruction that changes the CPU state. */ static inline void gen_lookup_tb(DisasContext *s) { @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, /* If we're in Secure EL1 (which implies that EL3 is AArch64) * then accesses to Mon registers trap to EL3 */ - exc_target = 3; - goto undef; + TCGv_i32 tcg_el = tcg_const_i32(3); + + gen_exception_el(s, EXCP_UDEF, syn_uncategorized(), tcg_el); + tcg_temp_free_i32(tcg_el); + return false; } break; case ARM_CPU_MODE_HYP: -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> This adds handling for the SCR_EL3.EEL2 bit. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Message-id: 20210112104511.36576-17-remi.denis.courmont@huawei.com [PMM: Applied fixes for review issues noted by RTH: - check for FEATURE_AARCH64 before checking sel2 isar feature - correct the commit message subject line] Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 8 ++++++-- target/arm/cpu.c | 2 +- target/arm/helper.c | 19 ++++++++++++++++--- target/arm/translate.c | 15 +++++++++++++-- 4 files changed, 36 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_is_secure(CPUARMState *env) static inline bool arm_is_el2_enabled(CPUARMState *env) { if (arm_feature(env, ARM_FEATURE_EL2)) { - return !arm_is_secure_below_el3(env); + if (arm_is_secure_below_el3(env)) { + return (env->cp15.scr_el3 & SCR_EEL2) != 0; + } + return true; } return false; } @@ -XXX,XX +XXX,XX @@ static inline bool arm_el_is_aa64(CPUARMState *env, int el) return aa64; } - if (arm_feature(env, ARM_FEATURE_EL3)) { + if (arm_feature(env, ARM_FEATURE_EL3) && + ((env->cp15.scr_el3 & SCR_NS) || !(env->cp15.scr_el3 & SCR_EEL2))) { aa64 = aa64 && (env->cp15.scr_el3 & SCR_RW); } diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * masked from Secure state. The HCR and SCR settings * don't affect the masking logic, only the interrupt routing. */ - if (target_el == 3 || !secure) { + if (target_el == 3 || !secure || (env->cp15.scr_el3 & SCR_EEL2)) { unmasked = true; } } else { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_trap_aa32s_el1(CPUARMState *env, return CP_ACCESS_OK; } if (arm_is_secure_below_el3(env)) { + if (env->cp15.scr_el3 & SCR_EEL2) { + return CP_ACCESS_TRAP_EL2; + } return CP_ACCESS_TRAP_EL3; } /* This will be EL1 NS and EL2 NS, which just UNDEF */ @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_pauth, cpu)) { valid_mask |= SCR_API | SCR_APK; } + if (cpu_isar_feature(aa64_sel2, cpu)) { + valid_mask |= SCR_EEL2; + } if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= SCR_ATA; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (ri->opc2 & 4) { - /* The ATS12NSO* operations must trap to EL3 if executed in + /* The ATS12NSO* operations must trap to EL3 or EL2 if executed in * Secure EL1 (which can only happen if EL3 is AArch64). * They are simply UNDEF if executed from NS EL1. * They function normally from EL2 or EL3. */ if (arm_current_el(env) == 1) { if (arm_is_secure_below_el3(env)) { + if (env->cp15.scr_el3 & SCR_EEL2) { + return CP_ACCESS_TRAP_UNCATEGORIZED_EL2; + } return CP_ACCESS_TRAP_UNCATEGORIZED_EL3; } return CP_ACCESS_TRAP_UNCATEGORIZED; @@ -XXX,XX +XXX,XX @@ static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri, static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - if (arm_current_el(env) == 3 && !(env->cp15.scr_el3 & SCR_NS)) { + if (arm_current_el(env) == 3 && + !(env->cp15.scr_el3 & (SCR_NS | SCR_EEL2))) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -XXX,XX +XXX,XX @@ static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { /* The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. - * At Secure EL1 it traps to EL3. + * At Secure EL1 it traps to EL3 or EL2. */ if (arm_current_el(env) == 3) { return CP_ACCESS_OK; } if (arm_is_secure_below_el3(env)) { + if (env->cp15.scr_el3 & SCR_EEL2) { + return CP_ACCESS_TRAP_EL2; + } return CP_ACCESS_TRAP_EL3; } /* Accesses from EL1 NS and EL2 NS are UNDEF for write but allow reads. */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, } if (s->current_el == 1) { /* If we're in Secure EL1 (which implies that EL3 is AArch64) - * then accesses to Mon registers trap to EL3 + * then accesses to Mon registers trap to Secure EL2, if it exists, + * otherwise EL3. */ - TCGv_i32 tcg_el = tcg_const_i32(3); + TCGv_i32 tcg_el; + + if (arm_dc_feature(s, ARM_FEATURE_AARCH64) && + dc_isar_feature(aa64_sel2, s)) { + /* Target EL is EL<3 minus SCR_EL3.EEL2> */ + tcg_el = load_cpu_field(cp15.scr_el3); + tcg_gen_sextract_i32(tcg_el, tcg_el, ctz32(SCR_EEL2), 1); + tcg_gen_addi_i32(tcg_el, tcg_el, 3); + } else { + tcg_el = tcg_const_i32(3); + } gen_exception_el(s, EXCP_UDEF, syn_uncategorized(), tcg_el); tcg_temp_free_i32(tcg_el); -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-18-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); + t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210112104511.36576-19-remi.denis.courmont@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_pou_access(CPUARMState *env, static int vae1_tlbmask(CPUARMState *env) { uint64_t hcr = arm_hcr_el2_eff(env); + uint16_t mask; if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { - uint16_t mask = ARMMMUIdxBit_E20_2 | - ARMMMUIdxBit_E20_2_PAN | - ARMMMUIdxBit_E20_0; - - if (arm_is_secure_below_el3(env)) { - mask >>= ARM_MMU_IDX_A_NS; - } - - return mask; - } else if (arm_is_secure_below_el3(env)) { - return ARMMMUIdxBit_SE10_1 | - ARMMMUIdxBit_SE10_1_PAN | - ARMMMUIdxBit_SE10_0; + mask = ARMMMUIdxBit_E20_2 | + ARMMMUIdxBit_E20_2_PAN | + ARMMMUIdxBit_E20_0; } else { - return ARMMMUIdxBit_E10_1 | + mask = ARMMMUIdxBit_E10_1 | ARMMMUIdxBit_E10_1_PAN | ARMMMUIdxBit_E10_0; } + + if (arm_is_secure_below_el3(env)) { + mask >>= ARM_MMU_IDX_A_NS; + } + + return mask; } /* Return 56 if TBI is enabled, 64 otherwise. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> SVE predicate operations cannot use the "usual" simd_desc encoding, because the lengths are not a multiple of 8. But we were abusing the SIMD_* fields to store values anyway. This abuse broke when SIMD_OPRSZ_BITS was modified in e2e7168a214. Introduce a new set of field definitions for exclusive use of predicates, so that it is obvious what kind of predicate we are manipulating. To be used in future patches. Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210113062650.593824-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_log_exception(int idx); #define LOG2_TAG_GRANULE 4 #define TAG_GRANULE (1 << LOG2_TAG_GRANULE) +/* + * SVE predicates are 1/8 the size of SVE vectors, and cannot use + * the same simd_desc() encoding due to restrictions on size. + * Use these instead. + */ +FIELD(PREDDESC, OPRSZ, 0, 6) +FIELD(PREDDESC, ESZ, 6, 2) +FIELD(PREDDESC, DATA, 8, 24) + /* * The SVE simd_data field, for memory ops, contains either * rd (5 bits) or a shift count (2 bits). -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These two were odd, in that do_pfirst_pnext passed the count of 64-bit words rather than bytes. Change to pass the standard pred_full_reg_size to avoid confusion. Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210113062650.593824-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 7 ++++--- target/arm/translate-sve.c | 6 +++--- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static intptr_t last_active_element(uint64_t *g, intptr_t words, intptr_t esz) return (intptr_t)-1 << esz; } -uint32_t HELPER(sve_pfirst)(void *vd, void *vg, uint32_t words) +uint32_t HELPER(sve_pfirst)(void *vd, void *vg, uint32_t pred_desc) { + intptr_t words = DIV_ROUND_UP(FIELD_EX32(pred_desc, PREDDESC, OPRSZ), 8); uint32_t flags = PREDTEST_INIT; uint64_t *d = vd, *g = vg; intptr_t i = 0; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_pfirst)(void *vd, void *vg, uint32_t words) uint32_t HELPER(sve_pnext)(void *vd, void *vg, uint32_t pred_desc) { - intptr_t words = extract32(pred_desc, 0, SIMD_OPRSZ_BITS); - intptr_t esz = extract32(pred_desc, SIMD_DATA_SHIFT, 2); + intptr_t words = DIV_ROUND_UP(FIELD_EX32(pred_desc, PREDDESC, OPRSZ), 8); + intptr_t esz = FIELD_EX32(pred_desc, PREDDESC, ESZ); uint32_t flags = PREDTEST_INIT; uint64_t *d = vd, *g = vg, esz_mask; intptr_t i, next; diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_pfirst_pnext(DisasContext *s, arg_rr_esz *a, TCGv_ptr t_pd = tcg_temp_new_ptr(); TCGv_ptr t_pg = tcg_temp_new_ptr(); TCGv_i32 t; - unsigned desc; + unsigned desc = 0; - desc = DIV_ROUND_UP(pred_full_reg_size(s), 8); - desc = deposit32(desc, SIMD_DATA_SHIFT, 2, a->esz); + desc = FIELD_DP32(desc, PREDDESC, OPRSZ, pred_full_reg_size(s)); + desc = FIELD_DP32(desc, PREDDESC, ESZ, a->esz); tcg_gen_addi_ptr(t_pd, cpu_env, pred_full_reg_offset(s, a->rd)); tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, a->rn)); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Update all users of do_perm_pred3 for the new predicate descriptor field definitions. Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210113062650.593824-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 18 +++++++++--------- target/arm/translate-sve.c | 12 ++++-------- 2 files changed, 13 insertions(+), 17 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t compress_bits(uint64_t x, int n) void HELPER(sve_zip_p)(void *vd, void *vn, void *vm, uint32_t pred_desc) { - intptr_t oprsz = extract32(pred_desc, 0, SIMD_OPRSZ_BITS) + 2; - int esz = extract32(pred_desc, SIMD_DATA_SHIFT, 2); - intptr_t high = extract32(pred_desc, SIMD_DATA_SHIFT + 2, 1); + intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ); + int esz = FIELD_EX32(pred_desc, PREDDESC, ESZ); + intptr_t high = FIELD_EX32(pred_desc, PREDDESC, DATA); uint64_t *d = vd; intptr_t i; @@ -XXX,XX +XXX,XX @@ void HELPER(sve_zip_p)(void *vd, void *vn, void *vm, uint32_t pred_desc) void HELPER(sve_uzp_p)(void *vd, void *vn, void *vm, uint32_t pred_desc) { - intptr_t oprsz = extract32(pred_desc, 0, SIMD_OPRSZ_BITS) + 2; - int esz = extract32(pred_desc, SIMD_DATA_SHIFT, 2); - int odd = extract32(pred_desc, SIMD_DATA_SHIFT + 2, 1) << esz; + intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ); + int esz = FIELD_EX32(pred_desc, PREDDESC, ESZ); + int odd = FIELD_EX32(pred_desc, PREDDESC, DATA) << esz; uint64_t *d = vd, *n = vn, *m = vm; uint64_t l, h; intptr_t i; @@ -XXX,XX +XXX,XX @@ void HELPER(sve_uzp_p)(void *vd, void *vn, void *vm, uint32_t pred_desc) void HELPER(sve_trn_p)(void *vd, void *vn, void *vm, uint32_t pred_desc) { - intptr_t oprsz = extract32(pred_desc, 0, SIMD_OPRSZ_BITS) + 2; - uintptr_t esz = extract32(pred_desc, SIMD_DATA_SHIFT, 2); - bool odd = extract32(pred_desc, SIMD_DATA_SHIFT + 2, 1); + intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ); + int esz = FIELD_EX32(pred_desc, PREDDESC, ESZ); + int odd = FIELD_EX32(pred_desc, PREDDESC, DATA); uint64_t *d = vd, *n = vn, *m = vm; uint64_t mask; int shr, shl; diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_perm_pred3(DisasContext *s, arg_rrr_esz *a, bool high_odd, unsigned vsz = pred_full_reg_size(s); - /* Predicate sizes may be smaller and cannot use simd_desc. - We cannot round up, as we do elsewhere, because we need - the exact size for ZIP2 and REV. We retain the style for - the other helpers for consistency. */ TCGv_ptr t_d = tcg_temp_new_ptr(); TCGv_ptr t_n = tcg_temp_new_ptr(); TCGv_ptr t_m = tcg_temp_new_ptr(); TCGv_i32 t_desc; - int desc; + uint32_t desc = 0; - desc = vsz - 2; - desc = deposit32(desc, SIMD_DATA_SHIFT, 2, a->esz); - desc = deposit32(desc, SIMD_DATA_SHIFT + 2, 2, high_odd); + desc = FIELD_DP32(desc, PREDDESC, OPRSZ, vsz); + desc = FIELD_DP32(desc, PREDDESC, ESZ, a->esz); + desc = FIELD_DP32(desc, PREDDESC, DATA, high_odd); tcg_gen_addi_ptr(t_d, cpu_env, pred_full_reg_offset(s, a->rd)); tcg_gen_addi_ptr(t_n, cpu_env, pred_full_reg_offset(s, a->rn)); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Update all users of do_perm_pred2 for the new predicate descriptor field definitions. Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/bugs/1908551 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210113062650.593824-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 8 ++++---- target/arm/translate-sve.c | 13 ++++--------- 2 files changed, 8 insertions(+), 13 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static uint8_t reverse_bits_8(uint8_t x, int n) void HELPER(sve_rev_p)(void *vd, void *vn, uint32_t pred_desc) { - intptr_t oprsz = extract32(pred_desc, 0, SIMD_OPRSZ_BITS) + 2; - int esz = extract32(pred_desc, SIMD_DATA_SHIFT, 2); + intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ); + int esz = FIELD_EX32(pred_desc, PREDDESC, ESZ); intptr_t i, oprsz_2 = oprsz / 2; if (oprsz <= 8) { @@ -XXX,XX +XXX,XX @@ void HELPER(sve_rev_p)(void *vd, void *vn, uint32_t pred_desc) void HELPER(sve_punpk_p)(void *vd, void *vn, uint32_t pred_desc) { - intptr_t oprsz = extract32(pred_desc, 0, SIMD_OPRSZ_BITS) + 2; - intptr_t high = extract32(pred_desc, SIMD_DATA_SHIFT + 2, 1); + intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ); + intptr_t high = FIELD_EX32(pred_desc, PREDDESC, DATA); uint64_t *d = vd; intptr_t i; diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_perm_pred2(DisasContext *s, arg_rr_esz *a, bool high_odd, TCGv_ptr t_d = tcg_temp_new_ptr(); TCGv_ptr t_n = tcg_temp_new_ptr(); TCGv_i32 t_desc; - int desc; + uint32_t desc = 0; tcg_gen_addi_ptr(t_d, cpu_env, pred_full_reg_offset(s, a->rd)); tcg_gen_addi_ptr(t_n, cpu_env, pred_full_reg_offset(s, a->rn)); - /* Predicate sizes may be smaller and cannot use simd_desc. - We cannot round up, as we do elsewhere, because we need - the exact size for ZIP2 and REV. We retain the style for - the other helpers for consistency. */ - - desc = vsz - 2; - desc = deposit32(desc, SIMD_DATA_SHIFT, 2, a->esz); - desc = deposit32(desc, SIMD_DATA_SHIFT + 2, 2, high_odd); + desc = FIELD_DP32(desc, PREDDESC, OPRSZ, vsz); + desc = FIELD_DP32(desc, PREDDESC, ESZ, a->esz); + desc = FIELD_DP32(desc, PREDDESC, DATA, high_odd); t_desc = tcg_const_i32(desc); fn(t_d, t_n, t_desc); -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: wrapped one long line] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 95 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 105 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, + PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> [fixed s/device/bus/ error] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpapnic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 62 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 63 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ endif qtests_pci = \ (config_all_devices.has_key('CONFIG_VGA') ? ['display-vga-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_IVSHMEM_DEVICE') ? ['ivshmem-test'] : []) qtests_i386 = \ -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> The adc_qom_set function didn't free "response", which caused an indirect memory leak. So use qobject_unref() to fix it. ASAN shows memory leak stack: Indirect leak of 593280 byte(s) in 144 object(s) allocated from: #0 0x7f9a5e7e8d4e in __interceptor_calloc (/lib64/libasan.so.5+0x112d4e) #1 0x7f9a5e607a50 in g_malloc0 (/lib64/libglib-2.0.so.0+0x55a50) #2 0x55b1bebf636b in qdict_new ../qobject/qdict.c:30 #3 0x55b1bec09699 in parse_object ../qobject/json-parser.c:318 #4 0x55b1bec0b2df in parse_value ../qobject/json-parser.c:546 #5 0x55b1bec0b6a9 in json_parser_parse ../qobject/json-parser.c:580 #6 0x55b1bec060d1 in json_message_process_token ../qobject/json-streamer.c:92 #7 0x55b1bec16a12 in json_lexer_feed_char ../qobject/json-lexer.c:313 #8 0x55b1bec16fbd in json_lexer_feed ../qobject/json-lexer.c:350 #9 0x55b1bec06453 in json_message_parser_feed ../qobject/json-streamer.c:121 #10 0x55b1bebc2d51 in qmp_fd_receive ../tests/qtest/libqtest.c:614 #11 0x55b1bebc2f5e in qtest_qmp_receive_dict ../tests/qtest/libqtest.c:636 #12 0x55b1bebc2e6c in qtest_qmp_receive ../tests/qtest/libqtest.c:624 #13 0x55b1bebc3340 in qtest_vqmp ../tests/qtest/libqtest.c:715 #14 0x55b1bebc3942 in qtest_qmp ../tests/qtest/libqtest.c:756 #15 0x55b1bebbd64a in adc_qom_set ../tests/qtest/npcm7xx_adc-test.c:127 #16 0x55b1bebbd793 in adc_write_input ../tests/qtest/npcm7xx_adc-test.c:140 #17 0x55b1bebbdf92 in test_convert_external ../tests/qtest/npcm7xx_adc-test.c:246 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210118065627.79903-1-ganqixin@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_adc-test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tests/qtest/npcm7xx_adc-test.c b/tests/qtest/npcm7xx_adc-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_adc-test.c +++ b/tests/qtest/npcm7xx_adc-test.c @@ -XXX,XX +XXX,XX @@ static void adc_qom_set(QTestState *qts, const ADC *adc, path, name, value); /* The qom set message returns successfully. */ g_assert_true(qdict_haskey(response, "return")); + qobject_unref(response); } static void adc_write_input(QTestState *qts, const ADC *adc, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> When building with GCC 10.2 configured with --extra-cflags=-Os, we get: target/arm/m_helper.c: In function ‘arm_v7m_cpu_do_interrupt’: target/arm/m_helper.c:1811:16: error: ‘restore_s16_s31’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 1811 | if (restore_s16_s31) { | ^ target/arm/m_helper.c:1350:10: note: ‘restore_s16_s31’ was declared here 1350 | bool restore_s16_s31; | ^~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Initialize the 'restore_s16_s31' variable to silence the warning. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210119062739.589049-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool exc_secure = false; bool return_to_secure; bool ftype; - bool restore_s16_s31; + bool restore_s16_s31 = false; /* * If we're not in Handler mode then jumps to magic exception-exit -- 2.20.1 When we first converted our documentation to Sphinx, we split it into multiple manuals (system, interop, tools, etc), which are all built separately. The primary driver for this was wanting to be able to avoid shipping the 'devel' manual to end-users. However, this is working against the grain of the way Sphinx wants to be used and causes some annoyances: * Cross-references between documents become much harder or possibly impossible * There is no single index to the whole documentation * Within one manual there's no links or table-of-contents info that lets you easily navigate to the others * The devel manual doesn't get published on the QEMU website (it would be nice to able to refer to it there) Merely hiding our developer documentation from end users seems like it's not enough benefit for these costs. Combine all the documentation into a single manual (the same way that the readthedocs site builds it) and install the whole thing. The previous manual divisions remain as the new top level sections in the manual. * The per-manual conf.py files are no longer needed * The man_pages[] specifications previously in each per-manual conf.py move to the top level conf.py * docs/meson.build logic is simplified as we now only need to run Sphinx once for the HTML and then once for the manpages5B * The old index.html.in that produced the top-level page with links to each manual is no longer needed Unfortunately this means that we now have to build the HTML documentation into docs/manual in the build tree rather than directly into docs/; otherwise it is too awkward to ensure we install only the built manual and not also the dependency info, stamp file, etc. The manual still ends up in the same place in the final installed directory, but anybody who was consulting documentation from within the build tree will have to adjust where they're looking. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210115154449.4801-1-peter.maydell@linaro.org --- docs/conf.py | 46 ++++++++++++++++++++++++++++++- docs/devel/conf.py | 15 ----------- docs/index.html.in | 17 ------------ docs/interop/conf.py | 28 ------------------- docs/meson.build | 64 +++++++++++++++++--------------------------- docs/specs/conf.py | 16 ----------- docs/system/conf.py | 28 ------------------- docs/tools/conf.py | 37 ------------------------- docs/user/conf.py | 15 ----------- .gitlab-ci.yml | 4 +-- 10 files changed, 72 insertions(+), 198 deletions(-) delete mode 100644 docs/devel/conf.py delete mode 100644 docs/index.html.in delete mode 100644 docs/interop/conf.py delete mode 100644 docs/specs/conf.py delete mode 100644 docs/system/conf.py delete mode 100644 docs/tools/conf.py delete mode 100644 docs/user/conf.py diff --git a/docs/conf.py b/docs/conf.py index XXXXXXX..XXXXXXX 100644 --- a/docs/conf.py +++ b/docs/conf.py @@ -XXX,XX +XXX,XX @@ latex_documents = [ # -- Options for manual page output --------------------------------------- # Individual manual/conf.py can override this to create man pages -man_pages = [] +man_pages = [ + ('interop/qemu-ga', 'qemu-ga', + 'QEMU Guest Agent', + ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8), + ('interop/qemu-ga-ref', 'qemu-ga-ref', + 'QEMU Guest Agent Protocol Reference', + [], 7), + ('interop/qemu-qmp-ref', 'qemu-qmp-ref', + 'QEMU QMP Reference Manual', + [], 7), + ('interop/qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref', + 'QEMU Storage Daemon QMP Reference Manual', + [], 7), + ('system/qemu-manpage', 'qemu', + 'QEMU User Documentation', + ['Fabrice Bellard'], 1), + ('system/qemu-block-drivers', 'qemu-block-drivers', + 'QEMU block drivers reference', + ['Fabrice Bellard and the QEMU Project developers'], 7), + ('system/qemu-cpu-models', 'qemu-cpu-models', + 'QEMU CPU Models', + ['The QEMU Project developers'], 7), + ('tools/qemu-img', 'qemu-img', + 'QEMU disk image utility', + ['Fabrice Bellard'], 1), + ('tools/qemu-nbd', 'qemu-nbd', + 'QEMU Disk Network Block Device Server', + ['Anthony Liguori <anthony@codemonkey.ws>'], 8), + ('tools/qemu-pr-helper', 'qemu-pr-helper', + 'QEMU persistent reservation helper', + [], 8), + ('tools/qemu-storage-daemon', 'qemu-storage-daemon', + 'QEMU storage daemon', + [], 1), + ('tools/qemu-trace-stap', 'qemu-trace-stap', + 'QEMU SystemTap trace tool', + [], 1), + ('tools/virtfs-proxy-helper', 'virtfs-proxy-helper', + 'QEMU 9p virtfs proxy filesystem helper', + ['M. Mohan Kumar'], 1), + ('tools/virtiofsd', 'virtiofsd', + 'QEMU virtio-fs shared file system daemon', + ['Stefan Hajnoczi <stefanha@redhat.com>', + 'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1), +] # -- Options for Texinfo output ------------------------------------------- diff --git a/docs/devel/conf.py b/docs/devel/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/devel/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'devel' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = u'Developer''s Guide' diff --git a/docs/index.html.in b/docs/index.html.in deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/index.html.in +++ /dev/null @@ -XXX,XX +XXX,XX @@ -<!DOCTYPE html> -<html lang="en"> - <head> - <meta charset="UTF-8"> - <title>QEMU @VERSION@ Documentation</title> - </head> - <body> - <h1>QEMU @VERSION@ Documentation</h1> - <ul> - <li><a href="system/index.html">System Emulation User's Guide</a></li> - <li><a href="user/index.html">User Mode Emulation User's Guide</a></li> - <li><a href="tools/index.html">Tools Guide</a></li> - <li><a href="interop/index.html">System Emulation Management and Interoperability Guide</a></li> - <li><a href="specs/index.html">System Emulation Guest Hardware Specifications</a></li> - </ul> - </body> -</html> diff --git a/docs/interop/conf.py b/docs/interop/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/interop/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'interop' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = u'System Emulation Management and Interoperability Guide' - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('qemu-ga', 'qemu-ga', u'QEMU Guest Agent', - ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8), - ('qemu-ga-ref', 'qemu-ga-ref', 'QEMU Guest Agent Protocol Reference', - [], 7), - ('qemu-qmp-ref', 'qemu-qmp-ref', 'QEMU QMP Reference Manual', - [], 7), - ('qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref', - 'QEMU Storage Daemon QMP Reference Manual', [], 7), -] diff --git a/docs/meson.build b/docs/meson.build index XXXXXXX..XXXXXXX 100644 --- a/docs/meson.build +++ b/docs/meson.build @@ -XXX,XX +XXX,XX @@ if build_docs meson.source_root() / 'docs/sphinx/qmp_lexer.py', qapi_gen_depends ] - configure_file(output: 'index.html', - input: files('index.html.in'), - configuration: {'VERSION': meson.project_version()}, - install_dir: qemu_docdir) - manuals = [ 'devel', 'interop', 'tools', 'specs', 'system', 'user' ] man_pages = { - 'interop' : { 'qemu-ga.8': (have_tools ? 'man8' : ''), 'qemu-ga-ref.7': 'man7', 'qemu-qmp-ref.7': 'man7', 'qemu-storage-daemon-qmp-ref.7': (have_tools ? 'man7' : ''), - }, - 'tools': { 'qemu-img.1': (have_tools ? 'man1' : ''), 'qemu-nbd.8': (have_tools ? 'man8' : ''), 'qemu-pr-helper.8': (have_tools ? 'man8' : ''), @@ -XXX,XX +XXX,XX @@ if build_docs 'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''), 'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''), 'virtiofsd.1': (have_virtiofsd ? 'man1' : ''), - }, - 'system': { 'qemu.1': 'man1', 'qemu-block-drivers.7': 'man7', 'qemu-cpu-models.7': 'man7' - }, } sphinxdocs = [] sphinxmans = [] - foreach manual : manuals - private_dir = meson.current_build_dir() / (manual + '.p') - output_dir = meson.current_build_dir() / manual - input_dir = meson.current_source_dir() / manual - this_manual = custom_target(manual + ' manual', + private_dir = meson.current_build_dir() / 'manual.p' + output_dir = meson.current_build_dir() / 'manual' + input_dir = meson.current_source_dir() + + this_manual = custom_target('QEMU manual', build_by_default: build_docs, - output: [manual + '.stamp'], - input: [files('conf.py'), files(manual / 'conf.py')], - depfile: manual + '.d', + output: 'docs.stamp', + input: files('conf.py'), + depfile: 'docs.d', depend_files: sphinx_extn_depends, command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@', '-Ddepfile_stamp=@OUTPUT0@', '-b', 'html', '-d', private_dir, input_dir, output_dir]) - sphinxdocs += this_manual - if build_docs and manual != 'devel' - install_subdir(output_dir, install_dir: qemu_docdir) - endif + sphinxdocs += this_manual + install_subdir(output_dir, install_dir: qemu_docdir, strip_directory: true) - these_man_pages = [] - install_dirs = [] - foreach page, section : man_pages.get(manual, {}) - these_man_pages += page - install_dirs += section == '' ? false : get_option('mandir') / section - endforeach - if these_man_pages.length() > 0 - sphinxmans += custom_target(manual + ' man pages', - build_by_default: build_docs, - output: these_man_pages, - input: this_manual, - install: build_docs, - install_dir: install_dirs, - command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir, - input_dir, meson.current_build_dir()]) - endif + these_man_pages = [] + install_dirs = [] + foreach page, section : man_pages + these_man_pages += page + install_dirs += section == '' ? false : get_option('mandir') / section endforeach + + sphinxmans += custom_target('QEMU man pages', + build_by_default: build_docs, + output: these_man_pages, + input: this_manual, + install: build_docs, + install_dir: install_dirs, + command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir, + input_dir, meson.current_build_dir()]) + alias_target('sphinxdocs', sphinxdocs) alias_target('html', sphinxdocs) alias_target('man', sphinxmans) diff --git a/docs/specs/conf.py b/docs/specs/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/specs/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'specs' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = \ - u'System Emulation Guest Hardware Specifications' diff --git a/docs/system/conf.py b/docs/system/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/system/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'system' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = u'System Emulation User''s Guide' - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('qemu-manpage', 'qemu', u'QEMU User Documentation', - ['Fabrice Bellard'], 1), - ('qemu-block-drivers', 'qemu-block-drivers', - u'QEMU block drivers reference', - ['Fabrice Bellard and the QEMU Project developers'], 7), - ('qemu-cpu-models', 'qemu-cpu-models', - u'QEMU CPU Models', - ['The QEMU Project developers'], 7) -] diff --git a/docs/tools/conf.py b/docs/tools/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/tools/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'tools' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = \ - u'Tools Guide' - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('qemu-img', 'qemu-img', u'QEMU disk image utility', - ['Fabrice Bellard'], 1), - ('qemu-storage-daemon', 'qemu-storage-daemon', u'QEMU storage daemon', - [], 1), - ('qemu-nbd', 'qemu-nbd', u'QEMU Disk Network Block Device Server', - ['Anthony Liguori <anthony@codemonkey.ws>'], 8), - ('qemu-pr-helper', 'qemu-pr-helper', 'QEMU persistent reservation helper', - [], 8), - ('qemu-trace-stap', 'qemu-trace-stap', u'QEMU SystemTap trace tool', - [], 1), - ('virtfs-proxy-helper', 'virtfs-proxy-helper', - u'QEMU 9p virtfs proxy filesystem helper', - ['M. Mohan Kumar'], 1), - ('virtiofsd', 'virtiofsd', u'QEMU virtio-fs shared file system daemon', - ['Stefan Hajnoczi <stefanha@redhat.com>', - 'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1), -] diff --git a/docs/user/conf.py b/docs/user/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/user/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'user' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = u'User Mode Emulation User''s Guide' diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index XXXXXXX..XXXXXXX 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -XXX,XX +XXX,XX @@ pages: -t "Welcome to the QEMU sourcecode" - mv HTML public/src # Project documentation - - mv build/docs/index.html public/ - - for i in devel interop specs system tools user ; do mv build/docs/$i public/ ; done + - make -C build install DESTDIR=$(pwd)/temp-install + - mv temp-install/usr/local/share/doc/qemu/* public/ artifacts: paths: - public -- 2.20.1 First arm pullreq of the cycle; this is mostly my softfloat NaN handling series. (Lots more in my to-review queue, but I don't like pullreqs growing too close to a hundred patches at a time :-)) thanks -- PMM The following changes since commit 97f2796a3736ed37a1b85dc1c76a6c45b829dd17: Open 10.0 development tree (2024-12-10 17:41:17 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20241211 for you to fetch changes up to 1abe28d519239eea5cf9620bb13149423e5665f8: MAINTAINERS: Add correct email address for Vikram Garhwal (2024-12-11 15:31:09 +0000) ---------------------------------------------------------------- target-arm queue: * hw/net/lan9118: Extract PHY model, reuse with imx_fec, fix bugs * fpu: Make muladd NaN handling runtime-selected, not compile-time * fpu: Make default NaN pattern runtime-selected, not compile-time * fpu: Minor NaN-related cleanups * MAINTAINERS: email address updates ---------------------------------------------------------------- Bernhard Beschow (5): hw/net/lan9118: Extract lan9118_phy hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations hw/net/lan9118_phy: Fix off-by-one error in MII_ANLPAR register hw/net/lan9118_phy: Reuse MII constants hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement Leif Lindholm (1): MAINTAINERS: update email address for Leif Lindholm Peter Maydell (54): fpu: handle raising Invalid for infzero in pick_nan_muladd fpu: Check for default_nan_mode before calling pickNaNMulAdd softfloat: Allow runtime choice of inf * 0 + NaN result tests/fp: Explicitly set inf-zero-nan rule target/arm: Set FloatInfZeroNaNRule explicitly target/s390: Set FloatInfZeroNaNRule explicitly target/ppc: Set FloatInfZeroNaNRule explicitly target/mips: Set FloatInfZeroNaNRule explicitly target/sparc: Set FloatInfZeroNaNRule explicitly target/xtensa: Set FloatInfZeroNaNRule explicitly target/x86: Set FloatInfZeroNaNRule explicitly target/loongarch: Set FloatInfZeroNaNRule explicitly target/hppa: Set FloatInfZeroNaNRule explicitly softfloat: Pass have_snan to pickNaNMulAdd softfloat: Allow runtime choice of NaN propagation for muladd tests/fp: Explicitly set 3-NaN propagation rule target/arm: Set Float3NaNPropRule explicitly target/loongarch: Set Float3NaNPropRule explicitly target/ppc: Set Float3NaNPropRule explicitly target/s390x: Set Float3NaNPropRule explicitly target/sparc: Set Float3NaNPropRule explicitly target/mips: Set Float3NaNPropRule explicitly target/xtensa: Set Float3NaNPropRule explicitly target/i386: Set Float3NaNPropRule explicitly target/hppa: Set Float3NaNPropRule explicitly fpu: Remove use_first_nan field from float_status target/m68k: Don't pass NULL float_status to floatx80_default_nan() softfloat: Create floatx80 default NaN from parts64_default_nan target/loongarch: Use normal float_status in fclass_s and fclass_d helpers target/m68k: In frem helper, initialize local float_status from env->fp_status target/m68k: Init local float_status from env fp_status in gdb get/set reg target/sparc: Initialize local scratch float_status from env->fp_status target/ppc: Use env->fp_status in helper_compute_fprf functions fpu: Allow runtime choice of default NaN value tests/fp: Set default NaN pattern explicitly target/microblaze: Set default NaN pattern explicitly target/i386: Set default NaN pattern explicitly target/hppa: Set default NaN pattern explicitly target/alpha: Set default NaN pattern explicitly target/arm: Set default NaN pattern explicitly target/loongarch: Set default NaN pattern explicitly target/m68k: Set default NaN pattern explicitly target/mips: Set default NaN pattern explicitly target/openrisc: Set default NaN pattern explicitly target/ppc: Set default NaN pattern explicitly target/sh4: Set default NaN pattern explicitly target/rx: Set default NaN pattern explicitly target/s390x: Set default NaN pattern explicitly target/sparc: Set default NaN pattern explicitly target/xtensa: Set default NaN pattern explicitly target/hexagon: Set default NaN pattern explicitly target/riscv: Set default NaN pattern explicitly target/tricore: Set default NaN pattern explicitly fpu: Remove default handling for dnan_pattern Richard Henderson (11): target/arm: Copy entire float_status in is_ebf softfloat: Inline pickNaNMulAdd softfloat: Use goto for default nan case in pick_nan_muladd softfloat: Remove which from parts_pick_nan_muladd softfloat: Pad array size in pick_nan_muladd softfloat: Move propagateFloatx80NaN to softfloat.c softfloat: Use parts_pick_nan in propagateFloatx80NaN softfloat: Inline pickNaN softfloat: Share code between parts_pick_nan cases softfloat: Sink frac_cmp in parts_pick_nan until needed softfloat: Replace WHICH with RET in parts_pick_nan Vikram Garhwal (1): MAINTAINERS: Add correct email address for Vikram Garhwal MAINTAINERS | 4 +- include/fpu/softfloat-helpers.h | 38 +++- include/fpu/softfloat-types.h | 89 +++++++- include/hw/net/imx_fec.h | 9 +- include/hw/net/lan9118_phy.h | 37 ++++ include/hw/net/mii.h | 6 + target/mips/fpu_helper.h | 20 ++ target/sparc/helper.h | 4 +- fpu/softfloat.c | 19 ++ hw/net/imx_fec.c | 146 ++------------ hw/net/lan9118.c | 137 ++----------- hw/net/lan9118_phy.c | 222 ++++++++++++++++++++ linux-user/arm/nwfpe/fpa11.c | 5 + target/alpha/cpu.c | 2 + target/arm/cpu.c | 10 + target/arm/tcg/vec_helper.c | 20 +- target/hexagon/cpu.c | 2 + target/hppa/fpu_helper.c | 12 ++ target/i386/tcg/fpu_helper.c | 12 ++ target/loongarch/tcg/fpu_helper.c | 14 +- target/m68k/cpu.c | 14 +- target/m68k/fpu_helper.c | 6 +- target/m68k/helper.c | 6 +- target/microblaze/cpu.c | 2 + target/mips/msa.c | 10 + target/openrisc/cpu.c | 2 + target/ppc/cpu_init.c | 19 ++ target/ppc/fpu_helper.c | 3 +- target/riscv/cpu.c | 2 + target/rx/cpu.c | 2 + target/s390x/cpu.c | 5 + target/sh4/cpu.c | 2 + target/sparc/cpu.c | 6 + target/sparc/fop_helper.c | 8 +- target/sparc/translate.c | 4 +- target/tricore/helper.c | 2 + target/xtensa/cpu.c | 4 + target/xtensa/fpu_helper.c | 3 +- tests/fp/fp-bench.c | 7 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 7 + fpu/softfloat-parts.c.inc | 152 +++++++++++--- fpu/softfloat-specialize.c.inc | 412 ++------------------------------------ .mailmap | 5 +- hw/net/Kconfig | 5 + hw/net/meson.build | 1 + hw/net/trace-events | 10 +- 47 files changed, 778 insertions(+), 730 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c From: Bernhard Beschow <shentey@gmail.com> A very similar implementation of the same device exists in imx_fec. Prepare for a common implementation by extracting a device model into its own files. Some migration state has been moved into the new device model which breaks migration compatibility for the following machines: * smdkc210 * realview-* * vexpress-* * kzm * mps2-* While breaking migration ABI, fix the size of the MII registers to be 16 bit, as defined by IEEE 802.3u. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118_phy.h | 37 ++++++++ hw/net/lan9118.c | 137 +++++----------------------- hw/net/lan9118_phy.c | 169 +++++++++++++++++++++++++++++++++++ hw/net/Kconfig | 4 + hw/net/meson.build | 1 + 5 files changed, 233 insertions(+), 115 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c diff --git a/include/hw/net/lan9118_phy.h b/include/hw/net/lan9118_phy.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118_phy.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_PHY_H +#define HW_NET_LAN9118_PHY_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +#define TYPE_LAN9118_PHY "lan9118-phy" +OBJECT_DECLARE_SIMPLE_TYPE(Lan9118PhyState, LAN9118_PHY) + +typedef struct Lan9118PhyState { + SysBusDevice parent_obj; + + uint16_t status; + uint16_t control; + uint16_t advertise; + uint16_t ints; + uint16_t int_mask; + qemu_irq irq; + bool link_down; +} Lan9118PhyState; + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down); +void lan9118_phy_reset(Lan9118PhyState *s); +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg); +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val); + +#endif diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "net/net.h" #include "net/eth.h" #include "hw/irq.h" +#include "hw/net/lan9118_phy.h" #include "hw/net/lan9118.h" #include "hw/ptimer.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0) #define MAC_CR_RXEN 0x00000004 #define MAC_CR_RESERVED 0x7f404213 -#define PHY_INT_ENERGYON 0x80 -#define PHY_INT_AUTONEG_COMPLETE 0x40 -#define PHY_INT_FAULT 0x20 -#define PHY_INT_DOWN 0x10 -#define PHY_INT_AUTONEG_LP 0x08 -#define PHY_INT_PARFAULT 0x04 -#define PHY_INT_AUTONEG_PAGE 0x02 - #define GPT_TIMER_EN 0x20000000 /* @@ -XXX,XX +XXX,XX @@ struct lan9118_state { uint32_t mac_mii_data; uint32_t mac_flow; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; int32_t eeprom_writable; uint8_t eeprom[128]; @@ -XXX,XX +XXX,XX @@ struct lan9118_state { static const VMStateDescription vmstate_lan9118 = { .name = "lan9118", - .version_id = 2, - .minimum_version_id = 1, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_PTIMER(timer, lan9118_state), VMSTATE_UINT32(irq_cfg, lan9118_state), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118 = { VMSTATE_UINT32(mac_mii_acc, lan9118_state), VMSTATE_UINT32(mac_mii_data, lan9118_state), VMSTATE_UINT32(mac_flow, lan9118_state), - VMSTATE_UINT32(phy_status, lan9118_state), - VMSTATE_UINT32(phy_control, lan9118_state), - VMSTATE_UINT32(phy_advertise, lan9118_state), - VMSTATE_UINT32(phy_int, lan9118_state), - VMSTATE_UINT32(phy_int_mask, lan9118_state), VMSTATE_INT32(eeprom_writable, lan9118_state), VMSTATE_UINT8_ARRAY(eeprom, lan9118_state, 128), VMSTATE_INT32(tx_fifo_size, lan9118_state), @@ -XXX,XX +XXX,XX @@ static void lan9118_reload_eeprom(lan9118_state *s) lan9118_mac_changed(s); } -static void phy_update_irq(lan9118_state *s) +static void lan9118_update_irq(void *opaque, int n, int level) { - if (s->phy_int & s->phy_int_mask) { + lan9118_state *s = opaque; + + if (level) { s->int_sts |= PHY_INT; } else { s->int_sts &= ~PHY_INT; @@ -XXX,XX +XXX,XX @@ static void phy_update_irq(lan9118_state *s) lan9118_update(s); } -static void phy_update_link(lan9118_state *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - phy_update_irq(s); -} - static void lan9118_set_link(NetClientState *nc) { - phy_update_link(qemu_get_nic_opaque(nc)); -} - -static void phy_reset(lan9118_state *s) -{ - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - phy_update_link(s); + lan9118_phy_update_link(&LAN9118(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static void lan9118_reset(DeviceState *d) @@ -XXX,XX +XXX,XX @@ static void lan9118_reset(DeviceState *d) s->read_word_n = 0; s->write_word_n = 0; - phy_reset(s); - s->eeprom_writable = 0; lan9118_reload_eeprom(s); } @@ -XXX,XX +XXX,XX @@ static void do_tx_packet(lan9118_state *s) uint32_t status; /* FIXME: Honor TX disable, and allow queueing of packets. */ - if (s->phy_control & 0x4000) { + if (s->mii.control & 0x4000) { /* This assumes the receive routine doesn't touch the VLANClient. */ qemu_receive_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len); } else { @@ -XXX,XX +XXX,XX @@ static void tx_fifo_push(lan9118_state *s, uint32_t val) } } -static uint32_t do_phy_read(lan9118_state *s, int reg) -{ - uint32_t val; - - switch (reg) { - case 0: /* Basic Control */ - return s->phy_control; - case 1: /* Basic Status */ - return s->phy_status; - case 2: /* ID1 */ - return 0x0007; - case 3: /* ID2 */ - return 0xc0d1; - case 4: /* Auto-neg advertisement */ - return s->phy_advertise; - case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; - case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - phy_update_irq(s); - return val; - case 30: /* Interrupt mask */ - return s->phy_int_mask; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_read: PHY read reg %d\n", reg); - return 0; - } -} - -static void do_phy_write(lan9118_state *s, int reg, uint32_t val) -{ - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - phy_reset(s); - break; - } - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - /* TODO 17, 18, 27, 31 */ - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - phy_update_irq(s); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_write: PHY write reg %d = 0x%04x\n", reg, val); - } -} - static void do_mac_write(lan9118_state *s, int reg, uint32_t val) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static void do_mac_write(lan9118_state *s, int reg, uint32_t val) if (val & 2) { DPRINTF("PHY write %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); - do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data); + lan9118_phy_write(&s->mii, (val >> 6) & 0x1f, s->mac_mii_data); } else { - s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f); + s->mac_mii_data = lan9118_phy_read(&s->mii, (val >> 6) & 0x1f); DPRINTF("PHY read %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); } @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, break; case CSR_PMT_CTRL: if (val & 0x400) { - phy_reset(s); + lan9118_phy_reset(&s->mii); } s->pmt_ctrl &= ~0x34e; s->pmt_ctrl |= (val & 0x34e); @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) const MemoryRegionOps *mem_ops = s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops; + qemu_init_irq(&s->mii_irq, lan9118_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + memory_region_init_io(&s->mmio, OBJECT(dev), mem_ops, s, "lan9118-mmio", 0x100); sysbus_init_mmio(sbd, &s->mmio); diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This code is licensed under the GNU GPL v2 + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" +#include "hw/resettable.h" +#include "migration/vmstate.h" +#include "qemu/log.h" + +#define PHY_INT_ENERGYON (1 << 7) +#define PHY_INT_AUTONEG_COMPLETE (1 << 6) +#define PHY_INT_FAULT (1 << 5) +#define PHY_INT_DOWN (1 << 4) +#define PHY_INT_AUTONEG_LP (1 << 3) +#define PHY_INT_PARFAULT (1 << 2) +#define PHY_INT_AUTONEG_PAGE (1 << 1) + +static void lan9118_phy_update_irq(Lan9118PhyState *s) +{ + qemu_set_irq(s->irq, !!(s->ints & s->int_mask)); +} + +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) +{ + uint16_t val; + + switch (reg) { + case 0: /* Basic Control */ + return s->control; + case 1: /* Basic Status */ + return s->status; + case 2: /* ID1 */ + return 0x0007; + case 3: /* ID2 */ + return 0xc0d1; + case 4: /* Auto-neg advertisement */ + return s->advertise; + case 5: /* Auto-neg Link Partner Ability */ + return 0x0f71; + case 6: /* Auto-neg Expansion */ + return 1; + /* TODO 17, 18, 27, 29, 30, 31 */ + case 29: /* Interrupt source. */ + val = s->ints; + s->ints = 0; + lan9118_phy_update_irq(s); + return val; + case 30: /* Interrupt mask */ + return s->int_mask; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_read: PHY read reg %d\n", reg); + return 0; + } +} + +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) +{ + switch (reg) { + case 0: /* Basic Control */ + if (val & 0x8000) { + lan9118_phy_reset(s); + break; + } + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } + break; + case 4: /* Auto-neg advertisement */ + s->advertise = (val & 0x2d7f) | 0x80; + break; + /* TODO 17, 18, 27, 31 */ + case 30: /* Interrupt mask */ + s->int_mask = val & 0xff; + lan9118_phy_update_irq(s); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + } +} + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) +{ + s->link_down = link_down; + + /* Autonegotiation status mirrors link status. */ + if (link_down) { + s->status &= ~0x0024; + s->ints |= PHY_INT_DOWN; + } else { + s->status |= 0x0024; + s->ints |= PHY_INT_ENERGYON; + s->ints |= PHY_INT_AUTONEG_COMPLETE; + } + lan9118_phy_update_irq(s); +} + +void lan9118_phy_reset(Lan9118PhyState *s) +{ + s->control = 0x3000; + s->status = 0x7809; + s->advertise = 0x01e1; + s->int_mask = 0; + s->ints = 0; + lan9118_phy_update_link(s, s->link_down); +} + +static void lan9118_phy_reset_hold(Object *obj, ResetType type) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + lan9118_phy_reset(s); +} + +static void lan9118_phy_init(Object *obj) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + qdev_init_gpio_out(DEVICE(s), &s->irq, 1); +} + +static const VMStateDescription vmstate_lan9118_phy = { + .name = "lan9118-phy", + .version_id = 1, + .minimum_version_id = 1, + .fields = (const VMStateField[]) { + VMSTATE_UINT16(control, Lan9118PhyState), + VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(advertise, Lan9118PhyState), + VMSTATE_UINT16(ints, Lan9118PhyState), + VMSTATE_UINT16(int_mask, Lan9118PhyState), + VMSTATE_BOOL(link_down, Lan9118PhyState), + VMSTATE_END_OF_LIST() + } +}; + +static void lan9118_phy_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + rc->phases.hold = lan9118_phy_reset_hold; + dc->vmsd = &vmstate_lan9118_phy; +} + +static const TypeInfo types[] = { + { + .name = TYPE_LAN9118_PHY, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Lan9118PhyState), + .instance_init = lan9118_phy_init, + .class_init = lan9118_phy_class_init, + } +}; + +DEFINE_TYPES(types) diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config VMXNET3_PCI config SMC91C111 bool +config LAN9118_PHY + bool + config LAN9118 bool + select LAN9118_PHY select PTIMER config NE2000_ISA diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_VMXNET3_PCI', if_true: files('vmxnet3.c')) system_ss.add(when: 'CONFIG_SMC91C111', if_true: files('smc91c111.c')) system_ss.add(when: 'CONFIG_LAN9118', if_true: files('lan9118.c')) +system_ss.add(when: 'CONFIG_LAN9118_PHY', if_true: files('lan9118_phy.c')) system_ss.add(when: 'CONFIG_NE2000_ISA', if_true: files('ne2000-isa.c')) system_ss.add(when: 'CONFIG_OPENCORES_ETH', if_true: files('opencores_eth.c')) system_ss.add(when: 'CONFIG_XGMAC', if_true: files('xgmac.c')) -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> imx_fec models the same PHY as lan9118_phy. The code is almost the same with imx_fec having more logging and tracing. Merge these improvements into lan9118_phy and reuse in imx_fec to fix the code duplication. Some migration state how resides in the new device model which breaks migration compatibility for the following machines: * imx25-pdk * sabrelite * mcimx7d-sabre * mcimx6ul-evk Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-3-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 9 ++- hw/net/imx_fec.c | 146 ++++----------------------------------- hw/net/lan9118_phy.c | 82 ++++++++++++++++------ hw/net/Kconfig | 1 + hw/net/trace-events | 10 +-- 5 files changed, 85 insertions(+), 163 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXFECState, IMX_FEC) #define TYPE_IMX_ENET "imx.enet" #include "hw/sysbus.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" #include "net/net.h" #define ENET_EIR 1 @@ -XXX,XX +XXX,XX @@ struct IMXFECState { uint32_t tx_descriptor[ENET_TX_RING_NUM]; uint32_t tx_ring_num; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; uint32_t phy_num; bool phy_connected; struct IMXFECState *phy_consumer; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth_txdescs = { static const VMStateDescription vmstate_imx_eth = { .name = TYPE_IMX_FEC, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX), VMSTATE_UINT32(rx_descriptor, IMXFECState), VMSTATE_UINT32(tx_descriptor[0], IMXFECState), - VMSTATE_UINT32(phy_status, IMXFECState), - VMSTATE_UINT32(phy_control, IMXFECState), - VMSTATE_UINT32(phy_advertise, IMXFECState), - VMSTATE_UINT32(phy_int, IMXFECState), - VMSTATE_UINT32(phy_int_mask, IMXFECState), VMSTATE_END_OF_LIST() }, .subsections = (const VMStateDescription * const []) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth = { }, }; -#define PHY_INT_ENERGYON (1 << 7) -#define PHY_INT_AUTONEG_COMPLETE (1 << 6) -#define PHY_INT_FAULT (1 << 5) -#define PHY_INT_DOWN (1 << 4) -#define PHY_INT_AUTONEG_LP (1 << 3) -#define PHY_INT_PARFAULT (1 << 2) -#define PHY_INT_AUTONEG_PAGE (1 << 1) - static void imx_eth_update(IMXFECState *s); /* @@ -XXX,XX +XXX,XX @@ static void imx_eth_update(IMXFECState *s); * For now we don't handle any GPIO/interrupt line, so the OS will * have to poll for the PHY status. */ -static void imx_phy_update_irq(IMXFECState *s) +static void imx_phy_update_irq(void *opaque, int n, int level) { - imx_eth_update(s); -} - -static void imx_phy_update_link(IMXFECState *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - trace_imx_phy_update_link("down"); - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - trace_imx_phy_update_link("up"); - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - imx_phy_update_irq(s); + imx_eth_update(opaque); } static void imx_eth_set_link(NetClientState *nc) { - imx_phy_update_link(IMX_FEC(qemu_get_nic_opaque(nc))); -} - -static void imx_phy_reset(IMXFECState *s) -{ - trace_imx_phy_reset(); - - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - imx_phy_update_link(s); + lan9118_phy_update_link(&IMX_FEC(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static uint32_t imx_phy_read(IMXFECState *s, int reg) { - uint32_t val; uint32_t phy = reg / 32; if (!s->phy_connected) { @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) reg %= 32; - switch (reg) { - case 0: /* Basic Control */ - val = s->phy_control; - break; - case 1: /* Basic Status */ - val = s->phy_status; - break; - case 2: /* ID1 */ - val = 0x0007; - break; - case 3: /* ID2 */ - val = 0xc0d1; - break; - case 4: /* Auto-neg advertisement */ - val = s->phy_advertise; - break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; - break; - case 6: /* Auto-neg Expansion */ - val = 1; - break; - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - imx_phy_update_irq(s); - break; - case 30: /* Interrupt mask */ - val = s->phy_int_mask; - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy]%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - } - - trace_imx_phy_read(val, phy, reg); - - return val; + return lan9118_phy_read(&s->mii, reg); } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) @@ -XXX,XX +XXX,XX @@ static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) reg %= 32; - trace_imx_phy_write(val, phy, reg); - - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - imx_phy_reset(s); - } else { - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - imx_phy_update_irq(s); - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy)%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - break; - } + lan9118_phy_write(&s->mii, reg, val); } static void imx_fec_read_bd(IMXFECBufDesc *bd, dma_addr_t addr) @@ -XXX,XX +XXX,XX @@ static void imx_eth_reset(DeviceState *d) s->rx_descriptor = 0; memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor)); - - /* We also reset the PHY */ - imx_phy_reset(s); } static uint32_t imx_default_read(IMXFECState *s, uint32_t index) @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq[0]); sysbus_init_irq(sbd, &s->irq[1]); + qemu_init_irq(&s->mii_irq, imx_phy_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + qemu_macaddr_default_if_unset(&s->conf.macaddr); s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf, diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ * Copyright (c) 2009 CodeSourcery, LLC. * Written by Paul Brook * + * Copyright (c) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net> + * * This code is licensed under the GNU GPL v2 * * Contributions after 2012-01-13 are licensed under the terms of the @@ -XXX,XX +XXX,XX @@ #include "hw/resettable.h" #include "migration/vmstate.h" #include "qemu/log.h" +#include "trace.h" #define PHY_INT_ENERGYON (1 << 7) #define PHY_INT_AUTONEG_COMPLETE (1 << 6) @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) switch (reg) { case 0: /* Basic Control */ - return s->control; + val = s->control; + break; case 1: /* Basic Status */ - return s->status; + val = s->status; + break; case 2: /* ID1 */ - return 0x0007; + val = 0x0007; + break; case 3: /* ID2 */ - return 0xc0d1; + val = 0xc0d1; + break; case 4: /* Auto-neg advertisement */ - return s->advertise; + val = s->advertise; + break; case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; + val = 0x0f71; + break; case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ + val = 1; + break; case 29: /* Interrupt source. */ val = s->ints; s->ints = 0; lan9118_phy_update_irq(s); - return val; + break; case 30: /* Interrupt mask */ - return s->int_mask; + val = s->int_mask; + break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + val = 0; + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_read: PHY read reg %d\n", reg); - return 0; + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + val = 0; + break; } + + trace_lan9118_phy_read(val, reg); + + return val; } void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) { + trace_lan9118_phy_write(val, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { lan9118_phy_reset(s); - break; - } - s->control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + } else { + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } } break; case 4: /* Auto-neg advertisement */ s->advertise = (val & 0x2d7f) | 0x80; break; - /* TODO 17, 18, 27, 31 */ case 30: /* Interrupt mask */ s->int_mask = val & 0xff; lan9118_phy_update_irq(s); break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + break; } } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { + trace_lan9118_phy_update_link("down"); s->status &= ~0x0024; s->ints |= PHY_INT_DOWN; } else { + trace_lan9118_phy_update_link("up"); s->status |= 0x0024; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) void lan9118_phy_reset(Lan9118PhyState *s) { + trace_lan9118_phy_reset(); + s->control = 0x3000; s->status = 0x7809; s->advertise = 0x01e1; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_phy = { .version_id = 1, .minimum_version_id = 1, .fields = (const VMStateField[]) { - VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(advertise, Lan9118PhyState), VMSTATE_UINT16(ints, Lan9118PhyState), VMSTATE_UINT16(int_mask, Lan9118PhyState), diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_SUN8I_EMAC config IMX_FEC bool + select LAN9118_PHY config CADENCE bool diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 +# lan9118_phy.c +lan9118_phy_read(uint16_t val, int reg) "[0x%02x] -> 0x%04" PRIx16 +lan9118_phy_write(uint16_t val, int reg) "[0x%02x] <- 0x%04" PRIx16 +lan9118_phy_update_link(const char *s) "%s" +lan9118_phy_reset(void) "" + # lance.c lance_mem_readw(uint64_t addr, uint32_t ret) "addr=0x%"PRIx64"val=0x%04x" lance_mem_writew(uint64_t addr, uint32_t val) "addr=0x%"PRIx64"val=0x%04x" @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" imx_phy_read_num(int phy, int configured) "read request from unconfigured phy %d (configured %d)" -imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_write_num(int phy, int configured) "write request to unconfigured phy %d (configured %d)" -imx_phy_update_link(const char *s) "%s" -imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" imx_enet_read_bd(uint64_t addr, int flags, int len, int data, int options, int status) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x option 0x%04x status 0x%04x" imx_eth_tx_bd_busy(void) "tx_bd ran out of descriptors to transmit" -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Turns 0x70 into 0xe0 (== 0x70 << 1) which adds the missing MII_ANLPAR_TX and fixes the MSB of selector field to be zero, as specified in the datasheet. Fixes: 2a424990170b "LAN9118 emulation" Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-4-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) val = s->advertise; break; case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; + val = 0x0fe1; break; case 6: /* Auto-neg Expansion */ val = 1; -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Prefer named constants over magic values for better readability. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-5-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/mii.h | 6 +++++ hw/net/lan9118_phy.c | 63 ++++++++++++++++++++++++++++---------------- 2 files changed, 46 insertions(+), 23 deletions(-) diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/mii.h +++ b/include/hw/net/mii.h @@ -XXX,XX +XXX,XX @@ #define MII_BMSR_JABBER (1 << 1) /* Jabber detected */ #define MII_BMSR_EXTCAP (1 << 0) /* Ext-reg capability */ +#define MII_ANAR_RFAULT (1 << 13) /* Say we can detect faults */ #define MII_ANAR_PAUSE_ASYM (1 << 11) /* Try for asymmetric pause */ #define MII_ANAR_PAUSE (1 << 10) /* Try for pause */ #define MII_ANAR_TXFD (1 << 8) @@ -XXX,XX +XXX,XX @@ #define MII_ANAR_10FD (1 << 6) #define MII_ANAR_10 (1 << 5) #define MII_ANAR_CSMACD (1 << 0) +#define MII_ANAR_SELECT (0x001f) /* Selector bits */ #define MII_ANLPAR_ACK (1 << 14) #define MII_ANLPAR_PAUSEASY (1 << 11) /* can pause asymmetrically */ @@ -XXX,XX +XXX,XX @@ #define RTL8201CP_PHYID1 0x0000 #define RTL8201CP_PHYID2 0x8201 +/* SMSC LAN9118 */ +#define SMSCLAN9118_PHYID1 0x0007 +#define SMSCLAN9118_PHYID2 0xc0d1 + /* RealTek 8211E */ #define RTL8211E_PHYID1 0x001c #define RTL8211E_PHYID2 0xc915 diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/net/lan9118_phy.h" +#include "hw/net/mii.h" #include "hw/irq.h" #include "hw/resettable.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) uint16_t val; switch (reg) { - case 0: /* Basic Control */ + case MII_BMCR: val = s->control; break; - case 1: /* Basic Status */ + case MII_BMSR: val = s->status; break; - case 2: /* ID1 */ - val = 0x0007; + case MII_PHYID1: + val = SMSCLAN9118_PHYID1; break; - case 3: /* ID2 */ - val = 0xc0d1; + case MII_PHYID2: + val = SMSCLAN9118_PHYID2; break; - case 4: /* Auto-neg advertisement */ + case MII_ANAR: val = s->advertise; break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0fe1; + case MII_ANLPAR: + val = MII_ANLPAR_PAUSEASY | MII_ANLPAR_PAUSE | MII_ANLPAR_T4 | + MII_ANLPAR_TXFD | MII_ANLPAR_TX | MII_ANLPAR_10FD | + MII_ANLPAR_10 | MII_ANLPAR_CSMACD; break; - case 6: /* Auto-neg Expansion */ - val = 1; + case MII_ANER: + val = MII_ANER_NWAY; break; case 29: /* Interrupt source. */ val = s->ints; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) trace_lan9118_phy_write(val, reg); switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { + case MII_BMCR: + if (val & MII_BMCR_RESET) { lan9118_phy_reset(s); } else { - s->control = val & 0x7980; + s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 | + MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD | + MII_BMCR_CTST); /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + if (val & MII_BMCR_AUTOEN) { + s->status |= MII_BMSR_AN_COMP; } } break; - case 4: /* Auto-neg advertisement */ - s->advertise = (val & 0x2d7f) | 0x80; + case MII_ANAR: + s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | + MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | + MII_ANAR_SELECT)) + | MII_ANAR_TX; break; case 30: /* Interrupt mask */ s->int_mask = val & 0xff; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { trace_lan9118_phy_update_link("down"); - s->status &= ~0x0024; + s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST); s->ints |= PHY_INT_DOWN; } else { trace_lan9118_phy_update_link("up"); - s->status |= 0x0024; + s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_reset(Lan9118PhyState *s) { trace_lan9118_phy_reset(); - s->control = 0x3000; - s->status = 0x7809; - s->advertise = 0x01e1; + s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100; + s->status = MII_BMSR_100TX_FD + | MII_BMSR_100TX_HD + | MII_BMSR_10T_FD + | MII_BMSR_10T_HD + | MII_BMSR_AUTONEG + | MII_BMSR_EXTCAP; + s->advertise = MII_ANAR_TXFD + | MII_ANAR_TX + | MII_ANAR_10FD + | MII_ANAR_10 + | MII_ANAR_CSMACD; s->int_mask = 0; s->ints = 0; lan9118_phy_update_link(s, s->link_down); -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> The real device advertises this mode and the device model already advertises 100 mbps half duplex and 10 mbps full+half duplex. So advertise this mode to make the model more realistic. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-6-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) break; case MII_ANAR: s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | - MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | - MII_ANAR_SELECT)) + MII_ANAR_PAUSE | MII_ANAR_TXFD | MII_ANAR_10FD | + MII_ANAR_10 | MII_ANAR_SELECT)) | MII_ANAR_TX; break; case 30: /* Interrupt mask */ -- 2.34.1 For IEEE fused multiply-add, the (0 * inf) + NaN case should raise Invalid for the multiplication of 0 by infinity. Currently we handle this in the per-architecture ifdef ladder in pickNaNMulAdd(). However, since this isn't really architecture specific we can hoist it up to the generic code. For the cases where the infzero test in pickNaNMulAdd was returning 2, we can delete the check entirely and allow the code to fall into the normal pick-a-NaN handling, because this will return 2 anyway (input 'c' being the only NaN in this case). For the cases where infzero was returning 3 to indicate "return the default NaN", we must retain that "return 3". For Arm, this looks like it might be a behaviour change because we used to set float_flag_invalid | float_flag_invalid_imz only if C is a quiet NaN. However, it is not, because Arm target code never looks at float_flag_invalid_imz, and for the (0 * inf) + SNaN case we already raised float_flag_invalid via the "abc_mask & float_cmask_snan" check in pick_nan_muladd. For any target architecture using the "default implementation" at the bottom of the ifdef, this is a behaviour change but will be fixing a bug (where we failed to raise the Invalid exception for (0 * inf + QNaN). The architectures using the default case are: * hppa * i386 * sh4 * tricore The x86, Tricore and SH4 CPU architecture manuals are clear that this should have raised Invalid; HPPA is a bit vaguer but still seems clear enough. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-2-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 13 +++++++------ fpu/softfloat-specialize.c.inc | 29 +---------------------------- 2 files changed, 8 insertions(+), 34 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, int ab_mask, int abc_mask) { int which; + bool infzero = (ab_mask == float_cmask_infzero); if (unlikely(abc_mask & float_cmask_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, - ab_mask == float_cmask_infzero, s); + if (infzero) { + /* This is (0 * inf) + NaN or (inf * 0) + NaN */ + float_raise(float_flag_invalid | float_flag_invalid_imz, s); + } + + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); if (s->default_nan_mode || which == 3) { - /* - * Note that this check is after pickNaNMulAdd so that function - * has an opportunity to set the Invalid flag for infzero. - */ parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * the default NaN */ if (infzero && is_qnan(c_cls)) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * case sets InvalidOp and returns the default NaN */ if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } /* Prefer sNaN over qNaN, in the a, b, c order. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } + /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * to return an input NaN if we have one (ie c) rather than generating * a default NaN */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_RISCV) - /* For RISC-V, InvalidOp is set when multiplicands are Inf and zero */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - } return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } #elif defined(TARGET_SPARC) - /* For (inf,0,nan) return c. */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer SNaN over QNaN, order C, B, A. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns * an input NaN if we have one (ie c). */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } if (status->use_first_nan) { if (is_nan(a_cls)) { return 0; -- 2.34.1 If the target sets default_nan_mode then we're always going to return the default NaN, and pickNaNMulAdd() no longer has any side effects. For consistency with pickNaN(), check for default_nan_mode before calling pickNaNMulAdd(). When we convert pickNaNMulAdd() to allow runtime selection of the NaN propagation rule, this means we won't have to make the targets which use default_nan_mode also set a propagation rule. Since RiscV always uses default_nan_mode, this allows us to remove its ifdef case from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-3-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 8 ++++++-- fpu/softfloat-specialize.c.inc | 9 +++++++-- 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, float_raise(float_flag_invalid | float_flag_invalid_imz, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + if (s->default_nan_mode) { + which = 3; + } else { + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + } - if (s->default_nan_mode || which == 3) { + if (which == 3) { parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ + assert(!status->default_nan_mode); #if defined(TARGET_ARM) /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns * the default NaN @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { return 1; } -#elif defined(TARGET_RISCV) - return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { return 3; -- 2.34.1 IEEE 758 does not define a fixed rule for what NaN to return in the case of a fused multiply-add of inf * 0 + NaN. Different architectures thus do different things: * some return the default NaN * some return the input NaN * Arm returns the default NaN if the input NaN is quiet, and the input NaN if it is signalling We want to make this logic be runtime selected rather than hardcoded into the binary, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. Note that four architectures both use the muladd softfloat functions and did not have a branch of the ifdef ladder to specify their behaviour (and so were ending up with the "default" case, probably wrongly): i386, HPPA, SH4 and Tricore. SH4 and Tricore both set default_nan_mode, and so will never get into pickNaNMulAdd(). For HPPA and i386 we retain the same behaviour as the old default-case, which is to not ever return the default NaN. This might not be correct but it is not a behaviour change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-4-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 ++++ include/fpu/softfloat-types.h | 23 +++++++++ fpu/softfloat-specialize.c.inc | 91 ++++++++++++++++++++++----------- 3 files changed, 95 insertions(+), 30 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, + float_status *status) +{ + status->float_infzeronan_rule = rule; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) +{ + return status->float_infzeronan_rule; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * Rule for result of fused multiply-add 0 * Inf + NaN. + * This must be a NaN, but implementations differ on whether this + * is the input NaN or the default NaN. + * + * You don't need to set this if default_nan_mode is enabled. + * When not in default-NaN mode, it is an error for the target + * not to set the rule in float_status if it uses muladd, and we + * will assert if we need to handle an input NaN and no rule was + * selected. + */ +typedef enum __attribute__((__packed__)) { + /* No propagation rule specified */ + float_infzeronan_none = 0, + /* Result is never the default NaN (so always the input NaN) */ + float_infzeronan_dnan_never, + /* Result is always the default NaN */ + float_infzeronan_dnan_always, + /* Result is the default NaN if the input NaN is quiet */ + float_infzeronan_dnan_if_qnan, +} FloatInfZeroNaNRule; + /* * Floating Point Status. Individual architectures may maintain * several versions of float_status for different functions. The @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ bool flush_to_zero; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + FloatInfZeroNaNRule rule = status->float_infzeronan_rule; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * specify. */ assert(!status->default_nan_mode); + + if (rule == float_infzeronan_none) { + /* + * Temporarily fall back to ifdef ladder + */ #if defined(TARGET_ARM) - /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns - * the default NaN - */ - if (infzero && is_qnan(c_cls)) { - return 3; + /* + * For ARM, the (inf,zero,qnan) case returns the default NaN, + * but (inf,zero,snan) returns the input NaN. + */ + rule = float_infzeronan_dnan_if_qnan; +#elif defined(TARGET_MIPS) + if (snan_bit_is_one(status)) { + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN + */ + rule = float_infzeronan_dnan_always; + } else { + /* + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + rule = float_infzeronan_dnan_never; + } +#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ + defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ + defined(TARGET_I386) || defined(TARGET_LOONGARCH) + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + rule = float_infzeronan_dnan_never; +#elif defined(TARGET_S390X) + rule = float_infzeronan_dnan_always; +#endif } + if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the default NaN here, + * and some return the input NaN. + */ + switch (rule) { + case float_infzeronan_dnan_never: + return 2; + case float_infzeronan_dnan_always: + return 3; + case float_infzeronan_dnan_if_qnan: + return is_qnan(c_cls) ? 3 : 2; + default: + g_assert_not_reached(); + } + } + +#if defined(TARGET_ARM) + /* This looks different from the ARM ARM pseudocode, because the ARM ARM * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } #elif defined(TARGET_MIPS) if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - if (infzero) { - return 3; - } /* Prefer sNaN over qNaN, in the a, b, c order. */ if (is_snan(a_cls)) { return 0; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } #elif defined(TARGET_LOONGARCH64) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_PPC) - /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_S390X) - if (infzero) { - return 3; - } - if (is_snan(a_cls)) { return 0; } else if (is_snan(b_cls)) { -- 2.34.1 Explicitly set a rule in the softfloat tests for the inf-zero-nan muladd special case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_infzeronan_dnan_if_qnan. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241202131347.498124-5-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 5 +++++ tests/fp/fp-test.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) { bench_func_t f; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) { unsigned int i; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); verCases_maxErrorCount = n_max_errors; -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the Arm target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-6-peter.maydell@linaro.org --- target/arm/cpu.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, + * and the input NaN if it is signalling */ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_ARM) - /* - * For ARM, the (inf,zero,qnan) case returns the default NaN, - * but (inf,zero,snan) returns the input NaN. - */ - rule = float_infzeronan_dnan_if_qnan; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { /* * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for s390, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-7-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_infzeronan_rule(float_infzeronan_dnan_always, + &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * a default NaN */ rule = float_infzeronan_dnan_never; -#elif defined(TARGET_S390X) - rule = float_infzeronan_dnan_always; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the PPC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-8-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ rule = float_infzeronan_dnan_never; } -#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ +#elif defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - /* - * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the MIPS target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-9-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 9 +++++++++ target/mips/msa.c | 4 ++++ fpu/softfloat-specialize.c.inc | 16 +--------------- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_flush_mode(CPUMIPSState *env) static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); + FloatInfZeroNaNRule izn_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ set_snan_bit_is_one(!nan2008, &env->active_fpu.fp_status); set_default_nan_mode(!nan2008, &env->active_fpu.fp_status); + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN. + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c'. + */ + izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; + set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* set proper signanling bit meaning ("1" means "quiet") */ set_snan_bit_is_one(0, &env->active_tc.msa_fp_status); + + /* Inf * 0 + NaN returns the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, + &env->active_tc.msa_fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - rule = float_infzeronan_dnan_always; - } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - rule = float_infzeronan_dnan_never; - } -#elif defined(TARGET_SPARC) || \ +#if defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the SPARC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-10-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_SPARC) || \ - defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the xtensa target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-11-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) reset_mmu(env); cs->halted = env->runstall; #endif + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the x86 target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-12-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->mmx_status); set_float_2nan_prop_rule(float_2nan_prop_x87, &env->sse_status); + /* + * Only SSE has multiply-add instructions. In the SDM Section 14.5.2 + * "Fused-Multiply-ADD (FMA) Numeric Behavior" the NaN handling is + * specified -- for 0 * inf + NaN the input NaN is selected, and if + * there are multiple input NaNs they are selected in the order a, b, c. + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * Temporarily fall back to ifdef ladder */ #if defined(TARGET_HPPA) || \ - defined(TARGET_I386) || defined(TARGET_LOONGARCH) + defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the loongarch target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-13-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 5 +++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) &env->fp_status); set_flush_to_zero(0, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_HPPA) || \ - defined(TARGET_LOONGARCH) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ +#if defined(TARGET_HPPA) rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the HPPA target, so we can remove the ifdef from pickNaNMulAdd(). As this is the last target to be converted to explicitly setting the rule, we can remove the fallback code in pickNaNMulAdd() entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-14-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 13 +------------ 2 files changed, 3 insertions(+), 12 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { - FloatInfZeroNaNRule rule = status->float_infzeronan_rule; - /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ assert(!status->default_nan_mode); - if (rule == float_infzeronan_none) { - /* - * Temporarily fall back to ifdef ladder - */ -#if defined(TARGET_HPPA) - rule = float_infzeronan_dnan_never; -#endif - } - if (infzero) { /* * Inf * 0 + NaN -- some implementations return the default NaN here, * and some return the input NaN. */ - switch (rule) { + switch (status->float_infzeronan_rule) { case float_infzeronan_dnan_never: return 2; case float_infzeronan_dnan_always: -- 2.34.1 The new implementation of pickNaNMulAdd() will find it convenient to know whether at least one of the three arguments to the muladd was a signaling NaN. We already calculate that in the caller, so pass it in as a new bool have_snan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-15-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 5 +++-- fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, { int which; bool infzero = (ab_mask == float_cmask_infzero); + bool have_snan = (abc_mask & float_cmask_snan); - if (unlikely(abc_mask & float_cmask_snan)) { + if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, if (s->default_nan_mode) { which = 3; } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, | Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN *----------------------------------------------------------------------------*/ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, float_status *status) + bool infzero, bool have_snan, float_status *status) { /* * We guarantee not to require the target to tell us how to -- 2.34.1 IEEE 758 does not define a fixed rule for which NaN to pick as the result if both operands of a 3-operand fused multiply-add operation are NaNs. As a result different architectures have ended up with different rules for propagating NaNs. QEMU currently hardcodes the NaN propagation logic into the binary because pickNaNMulAdd() has an ifdef ladder for different targets. We want to make the propagation rule instead be selectable at runtime, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. It's valid not to set a propagation rule if default_nan_mode is enabled, because in that case there's no need to pick a NaN; all the callers of pickNaNMulAdd() catch this case and skip calling it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-16-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++ include/fpu/softfloat-types.h | 55 +++++++++++ fpu/softfloat-specialize.c.inc | 167 ++++++++------------------------ 3 files changed, 107 insertions(+), 126 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_3nan_prop_rule(Float3NaNPropRule rule, + float_status *status) +{ + status->float_3nan_prop_rule = rule; +} + static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, float_status *status) { @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline Float3NaNPropRule get_float_3nan_prop_rule(float_status *status) +{ + return status->float_3nan_prop_rule; +} + static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) { return status->float_infzeronan_rule; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ this code that are retained. #ifndef SOFTFLOAT_TYPES_H #define SOFTFLOAT_TYPES_H +#include "hw/registerfields.h" + /* * Software IEC/IEEE floating-point types. */ @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * 3-input NaN propagation rule, for fused multiply-add. Individual + * architectures have different rules for which input NaN is + * propagated to the output when there is more than one NaN on the + * input. + * + * If default_nan_mode is enabled then it is valid not to set a NaN + * propagation rule, because the softfloat code guarantees not to try + * to pick a NaN to propagate in default NaN mode. When not in + * default-NaN mode, it is an error for the target not to set the rule + * in float_status if it uses a muladd, and we will assert if we need + * to handle an input NaN and no rule was selected. + * + * The naming scheme for Float3NaNPropRule values is: + * float_3nan_prop_s_abc: + * = "Prefer SNaN over QNaN, then operand A over B over C" + * float_3nan_prop_abc: + * = "Prefer A over B over C regardless of SNaN vs QNAN" + * + * For QEMU, the multiply-add operation is A * B + C. + */ + +/* + * We set the Float3NaNPropRule enum values up so we can select the + * right value in pickNaNMulAdd in a data driven way. + */ +FIELD(3NAN, 1ST, 0, 2) /* which operand is most preferred ? */ +FIELD(3NAN, 2ND, 2, 2) /* which operand is next most preferred ? */ +FIELD(3NAN, 3RD, 4, 2) /* which operand is least preferred ? */ +FIELD(3NAN, SNAN, 6, 1) /* do we prefer SNaN over QNaN ? */ + +#define PROPRULE(X, Y, Z) \ + ((X << R_3NAN_1ST_SHIFT) | (Y << R_3NAN_2ND_SHIFT) | (Z << R_3NAN_3RD_SHIFT)) + +typedef enum __attribute__((__packed__)) { + float_3nan_prop_none = 0, /* No propagation rule specified */ + float_3nan_prop_abc = PROPRULE(0, 1, 2), + float_3nan_prop_acb = PROPRULE(0, 2, 1), + float_3nan_prop_bac = PROPRULE(1, 0, 2), + float_3nan_prop_bca = PROPRULE(1, 2, 0), + float_3nan_prop_cab = PROPRULE(2, 0, 1), + float_3nan_prop_cba = PROPRULE(2, 1, 0), + float_3nan_prop_s_abc = float_3nan_prop_abc | R_3NAN_SNAN_MASK, + float_3nan_prop_s_acb = float_3nan_prop_acb | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bac = float_3nan_prop_bac | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bca = float_3nan_prop_bca | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cab = float_3nan_prop_cab | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cba = float_3nan_prop_cba | R_3NAN_SNAN_MASK, +} Float3NaNPropRule; + +#undef PROPRULE + /* * Rule for result of fused multiply-add 0 * Inf + NaN. * This must be a NaN, but implementations differ on whether this @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + Float3NaNPropRule float_3nan_prop_rule; FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, bool have_snan, float_status *status) { + FloatClass cls[3] = { a_cls, b_cls, c_cls }; + Float3NaNPropRule rule = status->float_3nan_prop_rule; + int which; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } + if (rule == float_3nan_prop_none) { #if defined(TARGET_ARM) - - /* This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. - */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + /* + * This looks different from the ARM ARM pseudocode, because the ARM ARM + * puts the operands to a fused mac operation (a*b)+c in the order c,a,b + */ + rule = float_3nan_prop_s_cab; #elif defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* Prefer sNaN over qNaN, in the a, b, c order. */ - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; + if (snan_bit_is_one(status)) { + rule = float_3nan_prop_s_abc; } else { - return 2; + rule = float_3nan_prop_s_cab; } - } else { - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - } #elif defined(TARGET_LOONGARCH64) - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(c_cls)) { - return 2; - } else { - return 1; - } + /* + * If fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + */ + rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) - /* Prefer SNaN over QNaN, order C, B, A. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } + rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) - /* - * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns - * an input NaN if we have one (ie c). - */ - if (status->use_first_nan) { - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; + if (status->use_first_nan) { + rule = float_3nan_prop_abc; } else { - return 2; + rule = float_3nan_prop_cba; } - } else { - if (is_nan(c_cls)) { - return 2; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - } #else - /* A default implementation: prefer a to b to c. - * This is unlikely to actually match any real implementation. - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_abc; #endif + } + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } + return which; } /*---------------------------------------------------------------------------- -- 2.34.1 Explicitly set a rule in the softfloat tests for propagating NaNs in the muladd case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_3nan_prop_s_cab. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-17-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test.c | 1 + 2 files changed, 2 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-18-peter.maydell@linaro.org --- target/arm/cpu.c | 5 +++++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 3-input NaN propagation prefers SNaN over QNaN, and then + * operand C over A over B (see FPProcessNaNs3() pseudocode, + * but note that for QEMU muladd is a * b + c, whereas for + * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling */ @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_ARM) - /* - * This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b - */ - rule = float_3nan_prop_s_cab; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { rule = float_3nan_prop_s_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for loongarch, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-19-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) * case sets InvalidOp and returns the input value 'c' */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_LOONGARCH64) - rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) /* * If fRA is a NaN return it; otherwise if fRB is a NaN return it; -- 2.34.1 Set the Float3NaNPropRule explicitly for PPC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-20-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 6 ------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * NaN propagation for fused multiply-add: + * if fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + * whereas QEMU labels the operands as (a * b) + c. + */ + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->vec_status); /* * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer * to return an input NaN if we have one (ie c) rather than generating diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_PPC) - /* - * If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) -- 2.34.1 Set the Float3NaNPropRule explicitly for s390x, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-21-peter.maydell@linaro.org --- target/s390x/cpu.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); /* fall through */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_S390X) - rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) -- 2.34.1 Set the Float3NaNPropRule explicitly for SPARC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-22-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For fused-multiply add, prefer SNaN over QNaN, then C->B->A */ + set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_SPARC) - rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-23-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 4 ++++ target/mips/msa.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); FloatInfZeroNaNRule izn_rule; + Float3NaNPropRule nan3_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); + nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; + set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->active_tc.msa_fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, + &env->active_tc.msa_fp_status); + /* clear float_status exception flags */ set_float_exception_flags(0, &env->active_tc.msa_fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - rule = float_3nan_prop_s_abc; - } else { - rule = float_3nan_prop_s_cab; - } -#elif defined(TARGET_XTENSA) +#if defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for xtensa, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-24-peter.maydell@linaro.org --- target/xtensa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 8 -------- 2 files changed, 2 insertions(+), 8 deletions(-) diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); + set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, + &env->fp_status); } void HELPER(wur_fpu2k_fcr)(CPUXtensaState *env, uint32_t v) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_XTENSA) - if (status->use_first_nan) { - rule = float_3nan_prop_abc; - } else { - rule = float_3nan_prop_cba; - } -#else rule = float_3nan_prop_abc; -#endif } assert(rule != float_3nan_prop_none); -- 2.34.1 Set the Float3NaNPropRule explicitly for i386. We had no i386-specific behaviour in the old ifdef ladder, so we were using the default "prefer a then b then c" fallback; this is actually the correct per-the-spec handling for i386. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-25-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) * there are multiple input NaNs they are selected in the order a, b, c. */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) -- 2.34.1 Set the Float3NaNPropRule explicitly for HPPA, and remove the ifdef from pickNaNMulAdd(). HPPA is the only target that was using the default branch of the ifdef ladder (other targets either do not use muladd or set default_nan_mode), so we can remove the ifdef fallback entirely now (allowing the "rule not set" case to fall into the default of the switch statement and assert). We add a TODO note that the HPPA rule is probably wrong; this is not a behavioural change for this refactoring. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-26-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * TODO: The HPPA architecture reference only documents its NaN + * propagation rule for 2-operand operations. Testing on real hardware + * might be necessary to confirm whether this order for muladd is correct. + * Not preferring the SNaN is almost certainly incorrect as it diverges + * from the documented rules for 2-operand operations. + */ + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } - if (rule == float_3nan_prop_none) { - rule = float_3nan_prop_abc; - } - assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ -- 2.34.1 The use_first_nan field in float_status was an xtensa-specific way to select at runtime from two different NaN propagation rules. Now that xtensa is using the target-agnostic NaN propagation rule selection that we've just added, we can remove use_first_nan, because there is no longer any code that reads it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-27-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 5 ----- include/fpu/softfloat-types.h | 1 - target/xtensa/fpu_helper.c | 1 - 3 files changed, 7 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_snan_bit_is_one(bool val, float_status *status) status->snan_bit_is_one = val; } -static inline void set_use_first_nan(bool val, float_status *status) -{ - status->use_first_nan = val; -} - static inline void set_no_signaling_nans(bool val, float_status *status) { status->no_signaling_nans = val; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { * softfloat-specialize.inc.c) */ bool snan_bit_is_one; - bool use_first_nan; bool no_signaling_nans; /* should overflowed results subtract re_bias to its exponent? */ bool rebias_overflow; diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ static const struct { void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) { - set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, -- 2.34.1 Currently m68k_cpu_reset_hold() calls floatx80_default_nan(NULL) to get the NaN bit pattern to reset the FPU registers. This works because it happens that our implementation of floatx80_default_nan() doesn't actually look at the float_status pointer except for TARGET_MIPS. However, this isn't guaranteed, and to be able to remove the ifdef in floatx80_default_nan() we're going to need a real float_status here. Rearrange m68k_cpu_reset_hold() so that we initialize env->fp_status earlier, and thus can pass it to floatx80_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-28-peter.maydell@linaro.org --- target/m68k/cpu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); CPUM68KState *env = cpu_env(cs); - floatx80 nan = floatx80_default_nan(NULL); + floatx80 nan; int i; if (mcc->parent_phases.hold) { @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) #else cpu_m68k_set_sr(env, SR_S | SR_I); #endif - for (i = 0; i < 8; i++) { - env->fregs[i].d = nan; - } - cpu_m68k_set_fpcr(env, 0); /* * M68000 FAMILY PROGRAMMER'S REFERENCE MANUAL * 3.4 FLOATING-POINT INSTRUCTION DETAILS @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + + nan = floatx80_default_nan(&env->fp_status); + for (i = 0; i < 8; i++) { + env->fregs[i].d = nan; + } + cpu_m68k_set_fpcr(env, 0); env->fpsr = 0; /* TODO: We should set PC from the interrupt vector. */ -- 2.34.1 We create our 128-bit default NaN by calling parts64_default_nan() and then adjusting the result. We can do the same trick for creating the floatx80 default NaN, which lets us drop a target ifdef. floatx80 is used only by: i386 m68k arm nwfpe old floating-point emulation emulation support (which is essentially dead, especially the parts involving floatx80) PPC (only in the xsrqpxp instruction, which just rounds an input value by converting to floatx80 and back, so will never generate the default NaN) The floatx80 default NaN as currently implemented is: m68k: sign = 0, exp = 1...1, int = 1, frac = 1....1 i386: sign = 1, exp = 1...1, int = 1, frac = 10...0 These are the same as the parts64_default_nan for these architectures. This is technically a possible behaviour change for arm linux-user nwfpe emulation emulation, because the default NaN will now have the sign bit clear. But we were already generating a different floatx80 default NaN from the real kernel emulation we are supposedly following, which appears to use an all-bits-1 value: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L267 This won't affect the only "real" use of the nwfpe emulation, which is ancient binaries that used it as part of the old floating point calling convention; that only uses loads and stores of 32 and 64 bit floats, not any of the floatx80 behaviour the original hardware had. We also get the nwfpe float64 default NaN value wrong: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L166 so if we ever cared about this obscure corner the right fix would be to correct that so nwfpe used its own default-NaN setting rather than the Arm VFP one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-29-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts128_silence_nan(FloatParts128 *p, float_status *status) floatx80 floatx80_default_nan(float_status *status) { floatx80 r; + /* + * Extrapolate from the choices made by parts64_default_nan to fill + * in the floatx80 format. We assume that floatx80's explicit + * integer bit is always set (this is true for i386 and m68k, + * which are the only real users of this format). + */ + FloatParts64 p64; + parts64_default_nan(&p64, status); - /* None of the targets that have snan_bit_is_one use floatx80. */ - assert(!snan_bit_is_one(status)); -#if defined(TARGET_M68K) - r.low = UINT64_C(0xFFFFFFFFFFFFFFFF); - r.high = 0x7FFF; -#else - /* X86 */ - r.low = UINT64_C(0xC000000000000000); - r.high = 0xFFFF; -#endif + r.high = 0x7FFF | (p64.sign << 15); + r.low = (1ULL << DECOMPOSED_BINARY_POINT) | p64.frac; return r; } -- 2.34.1 In target/loongarch's helper_fclass_s() and helper_fclass_d() we pass a zero-initialized float_status struct to float32_is_quiet_nan() and float64_is_quiet_nan(), with the cryptic comment "for snan_bit_is_one". This pattern appears to have been copied from target/riscv, where it is used because the functions there do not have ready access to the CPU state struct. The comment presumably refers to the fact that the main reason the is_quiet_nan() functions want the float_state is because they want to know about the snan_bit_is_one config. In the loongarch helpers, though, we have the CPU state struct to hand. Use the usual env->fp_status here. This avoids our needing to track that we need to update the initializer of the local float_status structs when the core softfloat code adds new options for targets to configure their behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-30-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_s(CPULoongArchState *env, uint64_t fj) } else if (float32_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float32_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float32_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float32_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_d(CPULoongArchState *env, uint64_t fj) } else if (float64_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float64_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float64_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float64_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } -- 2.34.1 In the frem helper, we have a local float_status because we want to execute the floatx80_div() with a custom rounding mode. Instead of zero-initializing the local float_status and then having to set it up with the m68k standard behaviour (including the NaN propagation rule and copying the rounding precision from env->fp_status), initialize it as a complete copy of env->fp_status. This will avoid our having to add new code in this function for every new config knob we add to fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-31-peter.maydell@linaro.org --- target/m68k/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/m68k/fpu_helper.c b/target/m68k/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/fpu_helper.c +++ b/target/m68k/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(frem)(CPUM68KState *env, FPReg *res, FPReg *val0, FPReg *val1) fp_rem = floatx80_rem(val1->d, val0->d, &env->fp_status); if (!floatx80_is_any_nan(fp_rem)) { - float_status fp_status = { }; + /* Use local temporary fp_status to set different rounding mode */ + float_status fp_status = env->fp_status; uint32_t quotient; int sign; /* Calculate quotient directly using round to nearest mode */ - set_float_2nan_prop_rule(float_2nan_prop_ab, &fp_status); set_float_rounding_mode(float_round_nearest_even, &fp_status); - set_floatx80_rounding_precision( - get_floatx80_rounding_precision(&env->fp_status), &fp_status); fp_quot.d = floatx80_div(val1->d, val0->d, &fp_status); sign = extractFloatx80Sign(fp_quot.d); -- 2.34.1 In cf_fpu_gdb_get_reg() and cf_fpu_gdb_set_reg() we do the conversion from float64 to floatx80 using a scratch float_status, because we don't want the conversion to affect the CPU's floating point exception status. Currently we use a zero-initialized float_status. This will get steadily more awkward as we add config knobs to float_status that the target must initialize. Avoid having to add any of that configuration here by instead initializing our local float_status from the env->fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-32-peter.maydell@linaro.org --- target/m68k/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/m68k/helper.c b/target/m68k/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/helper.c +++ b/target/m68k/helper.c @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_get_reg(CPUState *cs, GByteArray *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; return gdb_get_reg64(mem_buf, floatx80_to_float64(env->fregs[n].d, &s)); } switch (n) { @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_set_reg(CPUState *cs, uint8_t *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; env->fregs[n].d = float64_to_floatx80(ldq_be_p(mem_buf), &s); return 8; } -- 2.34.1 In the helper functions flcmps and flcmpd we use a scratch float_status so that we don't change the CPU state if the comparison raises any floating point exception flags. Instead of zero-initializing this scratch float_status, initialize it as a copy of env->fp_status. This avoids the need to explicitly initialize settings like the NaN propagation rule or others we might add to softfloat in future. To do this we need to pass the CPU env pointer in to the helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-33-peter.maydell@linaro.org --- target/sparc/helper.h | 4 ++-- target/sparc/fop_helper.c | 8 ++++---- target/sparc/translate.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/target/sparc/helper.h b/target/sparc/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/helper.h +++ b/target/sparc/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(fcmpd, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmped, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmpq, TCG_CALL_NO_WG, i32, env, i128, i128) DEF_HELPER_FLAGS_3(fcmpeq, TCG_CALL_NO_WG, i32, env, i128, i128) -DEF_HELPER_FLAGS_2(flcmps, TCG_CALL_NO_RWG_SE, i32, f32, f32) -DEF_HELPER_FLAGS_2(flcmpd, TCG_CALL_NO_RWG_SE, i32, f64, f64) +DEF_HELPER_FLAGS_3(flcmps, TCG_CALL_NO_RWG_SE, i32, env, f32, f32) +DEF_HELPER_FLAGS_3(flcmpd, TCG_CALL_NO_RWG_SE, i32, env, f64, f64) DEF_HELPER_2(raise_exception, noreturn, env, int) DEF_HELPER_FLAGS_3(faddd, TCG_CALL_NO_WG, f64, env, f64, f64) diff --git a/target/sparc/fop_helper.c b/target/sparc/fop_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/fop_helper.c +++ b/target/sparc/fop_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t helper_fcmpeq(CPUSPARCState *env, Int128 src1, Int128 src2) return finish_fcmp(env, r, GETPC()); } -uint32_t helper_flcmps(float32 src1, float32 src2) +uint32_t helper_flcmps(CPUSPARCState *env, float32 src1, float32 src2) { /* * FLCMP never raises an exception nor modifies any FSR fields. * Perform the comparison with a dummy fp environment. */ - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); @@ -XXX,XX +XXX,XX @@ uint32_t helper_flcmps(float32 src1, float32 src2) g_assert_not_reached(); } -uint32_t helper_flcmpd(float64 src1, float64 src2) +uint32_t helper_flcmpd(CPUSPARCState *env, float64 src1, float64 src2) { - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); diff --git a/target/sparc/translate.c b/target/sparc/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/translate.c +++ b/target/sparc/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPs(DisasContext *dc, arg_FLCMPs *a) src1 = gen_load_fpr_F(dc, a->rs1); src2 = gen_load_fpr_F(dc, a->rs2); - gen_helper_flcmps(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmps(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPd(DisasContext *dc, arg_FLCMPd *a) src1 = gen_load_fpr_D(dc, a->rs1); src2 = gen_load_fpr_D(dc, a->rs2); - gen_helper_flcmpd(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmpd(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } -- 2.34.1 In the helper_compute_fprf functions, we pass a dummy float_status in to the is_signaling_nan() function. This is unnecessary, because we have convenient access to the CPU env pointer here and that is already set up with the correct values for the snan_bit_is_one and no_signaling_nans config settings. is_signaling_nan() doesn't ever update the fp_status with any exception flags, so there is no reason not to use env->fp_status here. Use env->fp_status instead of the dummy fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-34-peter.maydell@linaro.org --- target/ppc/fpu_helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/ppc/fpu_helper.c b/target/ppc/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/fpu_helper.c +++ b/target/ppc/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void helper_compute_fprf_##tp(CPUPPCState *env, tp arg) \ } else if (tp##_is_infinity(arg)) { \ fprf = neg ? 0x09 << FPSCR_FPRF : 0x05 << FPSCR_FPRF; \ } else { \ - float_status dummy = { }; /* snan_bit_is_one = 0 */ \ - if (tp##_is_signaling_nan(arg, &dummy)) { \ + if (tp##_is_signaling_nan(arg, &env->fp_status)) { \ fprf = 0x00 << FPSCR_FPRF; \ } else { \ fprf = 0x11 << FPSCR_FPRF; \ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Now that float_status has a bunch of fp parameters, it is easier to copy an existing structure than create one from scratch. Begin by copying the structure that corresponds to the FPSR and make only the adjustments required for BFloat16 semantics. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/vec_helper.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vec_helper.c +++ b/target/arm/tcg/vec_helper.c @@ -XXX,XX +XXX,XX @@ bool is_ebf(CPUARMState *env, float_status *statusp, float_status *oddstatusp) * no effect on AArch32 instructions. */ bool ebf = is_a64(env) && env->vfp.fpcr & FPCR_EBF; - *statusp = (float_status){ - .tininess_before_rounding = float_tininess_before_rounding, - .float_rounding_mode = float_round_to_odd_inf, - .flush_to_zero = true, - .flush_inputs_to_zero = true, - .default_nan_mode = true, - }; + + *statusp = env->vfp.fp_status; + set_default_nan_mode(true, statusp); if (ebf) { - float_status *fpst = &env->vfp.fp_status; - set_flush_to_zero(get_flush_to_zero(fpst), statusp); - set_flush_inputs_to_zero(get_flush_inputs_to_zero(fpst), statusp); - set_float_rounding_mode(get_float_rounding_mode(fpst), statusp); - /* EBF=1 needs to do a step with round-to-odd semantics */ *oddstatusp = *statusp; set_float_rounding_mode(float_round_to_odd, oddstatusp); + } else { + set_flush_to_zero(true, statusp); + set_flush_inputs_to_zero(true, statusp); + set_float_rounding_mode(float_round_to_odd_inf, statusp); } - return ebf; } -- 2.34.1 Currently we hardcode the default NaN value in parts64_default_nan() using a compile-time ifdef ladder. This is awkward for two cases: * for single-QEMU-binary we can't hard-code target-specifics like this * for Arm FEAT_AFP the default NaN value depends on FPCR.AH (specifically the sign bit is different) Add a field to float_status to specify the default NaN value; fall back to the old ifdef behaviour if these are not set. The default NaN value is specified by setting a uint8_t to a pattern corresponding to the sign and upper fraction parts of the NaN; the lower bits of the fraction are set from bit 0 of the pattern. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-35-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++++++ include/fpu/softfloat-types.h | 10 ++++++ fpu/softfloat-specialize.c.inc | 55 ++++++++++++++++++++------------- 3 files changed, 54 insertions(+), 22 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, status->float_infzeronan_rule = rule; } +static inline void set_float_default_nan_pattern(uint8_t dnan_pattern, + float_status *status) +{ + status->default_nan_pattern = dnan_pattern; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status return status->float_infzeronan_rule; } +static inline uint8_t get_float_default_nan_pattern(float_status *status) +{ + return status->default_nan_pattern; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { /* should denormalised inputs go to zero and set the input_denormal flag? */ bool flush_inputs_to_zero; bool default_nan_mode; + /* + * The pattern to use for the default NaN. Here the high bit specifies + * the default NaN's sign bit, and bits 6..0 specify the high bits of the + * fractional part. The low bits of the fractional part are copies of bit 0. + * The exponent of the default NaN is (as for any NaN) always all 1s. + * Note that a value of 0 here is not a valid NaN. The target must set + * this to the correct non-zero value, or we will assert when trying to + * create a default NaN. + */ + uint8_t default_nan_pattern; /* * The flags below are not used on all specializations and may * constant fold away (see snan_bit_is_one()/no_signalling_nans() in diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) { bool sign = 0; uint64_t frac; + uint8_t dnan_pattern = status->default_nan_pattern; + if (dnan_pattern == 0) { #if defined(TARGET_SPARC) || defined(TARGET_M68K) - /* !snan_bit_is_one, set all bits */ - frac = (1ULL << DECOMPOSED_BINARY_POINT) - 1; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ + /* Sign bit clear, all frac bits set */ + dnan_pattern = 0b01111111; +#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ || defined(TARGET_MICROBLAZE) - /* !snan_bit_is_one, set sign and msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - sign = 1; + /* Sign bit set, most significant frac bit set */ + dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) - /* snan_bit_is_one, set msb-1. */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 2); + /* Sign bit clear, msb-1 frac bit set */ + dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) - sign = 1; - frac = ~0ULL; + /* Sign bit set, all frac bits set. */ + dnan_pattern = 0b11111111; #else - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* set all bits other than msb */ - frac = (1ULL << (DECOMPOSED_BINARY_POINT - 1)) - 1; - } else { - /* set msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - } + /* + * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, + * S390, SH4, TriCore, and Xtensa. Our other supported targets + * do not have floating-point. + */ + if (snan_bit_is_one(status)) { + /* sign bit clear, set all frac bits other than msb */ + dnan_pattern = 0b00111111; + } else { + /* sign bit clear, set frac msb */ + dnan_pattern = 0b01000000; + } #endif + } + assert(dnan_pattern != 0); + + sign = dnan_pattern >> 7; + /* + * Place default_nan_pattern [6:0] into bits [62:56], + * and replecate bit [0] down into [55:0] + */ + frac = deposit64(0, DECOMPOSED_BINARY_POINT - 7, 7, dnan_pattern); + frac = deposit64(frac, 0, DECOMPOSED_BINARY_POINT - 7, -(dnan_pattern & 1)); *p = (FloatParts64) { .cls = float_class_qnan, -- 2.34.1 Set the default NaN pattern explicitly for the tests/fp code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-36-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 1 + 3 files changed, 3 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); + set_float_default_nan_pattern(0b01000000, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test-log2.c b/tests/fp/fp-test-log2.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test-log2.c +++ b/tests/fp/fp-test-log2.c @@ -XXX,XX +XXX,XX @@ int main(int ac, char **av) int i; set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_rounding_mode(float_round_nearest_even, &qsf); test.d = 0.0; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-37-peter.maydell@linaro.org --- target/microblaze/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj, ResetType type) * this architecture. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) /* start in user mode with interrupts enabled. */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ - || defined(TARGET_MICROBLAZE) +#elif defined(TARGET_I386) || defined(TARGET_X86_64) /* Sign bit set, most significant frac bit set */ dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-38-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 4 ++++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); + set_float_default_nan_pattern(0b11000000, &env->mmx_status); + set_float_default_nan_pattern(0b11000000, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) - /* Sign bit set, most significant frac bit set */ - dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) /* Sign bit clear, msb-1 frac bit set */ dnan_pattern = 0b00100000; -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-39-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN: sign bit clear, msb-1 frac bit set */ + set_float_default_nan_pattern(0b00100000, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_HPPA) - /* Sign bit clear, msb-1 frac bit set */ - dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; -- 2.34.1 Set the default NaN pattern explicitly for the alpha target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-40-peter.maydell@linaro.org --- target/alpha/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/alpha/cpu.c b/target/alpha/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/alpha/cpu.c +++ b/target/alpha/cpu.c @@ -XXX,XX +XXX,XX @@ static void alpha_cpu_initfn(Object *obj) * operand in Fa. That is float_2nan_prop_ba. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) env->flags = ENV_FLAG_PS_USER | ENV_FLAG_FEN; cpu_alpha_store_fpcr(env, (uint64_t)(FPCR_INVD | FPCR_DZED | FPCR_OVFD -- 2.34.1 Set the default NaN pattern explicitly for the arm target. This includes setting it for the old linux-user nwfpe emulation. For nwfpe, our default doesn't match the real kernel, but we avoid making a behaviour change in this commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-41-peter.maydell@linaro.org --- linux-user/arm/nwfpe/fpa11.c | 5 +++++ target/arm/cpu.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/linux-user/arm/nwfpe/fpa11.c b/linux-user/arm/nwfpe/fpa11.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/nwfpe/fpa11.c +++ b/linux-user/arm/nwfpe/fpa11.c @@ -XXX,XX +XXX,XX @@ void resetFPA11(void) * this late date. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &fpa11->fp_status); + /* + * Use the same default NaN value as Arm VFP. This doesn't match + * the Linux kernel's nwfpe emulation, which uses an all-1s value. + */ + set_float_default_nan_pattern(0b01000000, &fpa11->fp_status); } void SetRoundingMode(const unsigned int opcode) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling + * * Default NaN has sign bit clear, msb frac bit set */ static void arm_set_default_fp_behaviours(float_status *s) { @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); + set_float_default_nan_pattern(0b01000000, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) -- 2.34.1 Set the default NaN pattern explicitly for loongarch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-42-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) -- 2.34.1 Set the default NaN pattern explicitly for m68k. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-43-peter.maydell@linaro.org --- target/m68k/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + /* Default NaN: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); nan = floatx80_default_nan(&env->fp_status); for (i = 0; i < 8; i++) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) || defined(TARGET_M68K) +#if defined(TARGET_SPARC) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; #elif defined(TARGET_HEXAGON) -- 2.34.1 Set the default NaN pattern explicitly for MIPS. Note that this is our only target which currently changes the default NaN at runtime (which it was previously doing indirectly when it changed the snan_bit_is_one setting). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-44-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 7 +++++++ target/mips/msa.c | 3 +++ 2 files changed, 10 insertions(+) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + /* + * With nan2008, the default NaN value has the sign bit clear and the + * frac msb set; with the older mode, the sign bit is clear, and all + * frac bits except the msb are set. + */ + set_float_default_nan_pattern(nan2008 ? 0b01000000 : 0b00111111, + &env->active_fpu.fp_status); } diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* Inf * 0 + NaN returns the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->active_tc.msa_fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, + &env->active_tc.msa_fp_status); } -- 2.34.1 Set the default NaN pattern explicitly for openrisc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-45-peter.maydell@linaro.org --- target/openrisc/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &cpu->env.fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &cpu->env.fp_status); #ifndef CONFIG_USER_ONLY cpu->env.picmr = 0x00000000; -- 2.34.1 Set the default NaN pattern explicitly for ppc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-46-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); + /* Default NaN: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); + set_float_default_nan_pattern(0b01000000, &env->vec_status); + for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; -- 2.34.1 Set the default NaN pattern explicitly for sh4. Note that sh4 is one of the only three targets (the others being HPPA and sometimes MIPS) that has snan_bit_is_one set. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-47-peter.maydell@linaro.org --- target/sh4/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static void superh_cpu_reset_hold(Object *obj, ResetType type) set_flush_to_zero(1, &env->fp_status); #endif set_default_nan_mode(1, &env->fp_status); + /* sign bit clear, set all frac bits other than msb */ + set_float_default_nan_pattern(0b00111111, &env->fp_status); } static void superh_cpu_disas_set_info(CPUState *cpu, disassemble_info *info) -- 2.34.1 Set the default NaN pattern explicitly for rx. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-48-peter.maydell@linaro.org --- target/rx/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj, ResetType type) * then prefer dest over source", which is float_2nan_prop_s_ab. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } static ObjectClass *rx_cpu_class_by_name(const char *cpu_model) -- 2.34.1 Set the default NaN pattern explicitly for s390x. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-49-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; -- 2.34.1 Set the default NaN pattern explicitly for SPARC, and remove the ifdef from parts64_default_nan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-50-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 +---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN value: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) - /* Sign bit clear, all frac bits set */ - dnan_pattern = 0b01111111; -#elif defined(TARGET_HEXAGON) +#if defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; #else -- 2.34.1 Set the default NaN pattern explicitly for xtensa. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-51-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } -- 2.34.1 Set the default NaN pattern explicitly for hexagon. Remove the ifdef from parts64_default_nan(); the only remaining unconverted targets all use the default case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-52-peter.maydell@linaro.org --- target/hexagon/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 ----- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_cpu_reset_hold(Object *obj, ResetType type) set_default_nan_mode(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); + /* Default NaN value: sign bit set, all frac bits set */ + set_float_default_nan_pattern(0b11111111, &env->fp_status); } static void hexagon_cpu_disas_set_info(CPUState *s, disassemble_info *info) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_HEXAGON) - /* Sign bit set, all frac bits set. */ - dnan_pattern = 0b11111111; -#else /* * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, * S390, SH4, TriCore, and Xtensa. Our other supported targets @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) /* sign bit clear, set frac msb */ dnan_pattern = 0b01000000; } -#endif } assert(dnan_pattern != 0); -- 2.34.1 Set the default NaN pattern explicitly for riscv. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-53-peter.maydell@linaro.org --- target/riscv/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) cs->exception_index = RISCV_EXCP_NONE; env->load_res = -1; set_default_nan_mode(1, &env->fp_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); env->vill = true; #ifndef CONFIG_USER_ONLY -- 2.34.1 Set the default NaN pattern explicitly for tricore. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-54-peter.maydell@linaro.org --- target/tricore/helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/tricore/helper.c b/target/tricore/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/helper.c +++ b/target/tricore/helper.c @@ -XXX,XX +XXX,XX @@ void fpu_set_state(CPUTriCoreState *env) set_flush_to_zero(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); set_default_nan_mode(1, &env->fp_status); + /* Default NaN pattern: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } uint32_t psw_read(CPUTriCoreState *env) -- 2.34.1 Now that all our targets have bene converted to explicitly specify their pattern for the default NaN value we can remove the remaining fallback code in parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-55-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint64_t frac; uint8_t dnan_pattern = status->default_nan_pattern; - if (dnan_pattern == 0) { - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* sign bit clear, set all frac bits other than msb */ - dnan_pattern = 0b00111111; - } else { - /* sign bit clear, set frac msb */ - dnan_pattern = 0b01000000; - } - } assert(dnan_pattern != 0); sign = dnan_pattern >> 7; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaNMulAdd into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-3-richard.henderson@linaro.org [PMM: keep comment from old code in new location] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 41 +++++++++++++++++++++++++- fpu/softfloat-specialize.c.inc | 54 ---------------------------------- 2 files changed, 40 insertions(+), 55 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } if (s->default_nan_mode) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ which = 3; + } else if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the + * default NaN here, and some return the input NaN. + */ + switch (s->float_infzeronan_rule) { + case float_infzeronan_dnan_never: + which = 2; + break; + case float_infzeronan_dnan_always: + which = 3; + break; + case float_infzeronan_dnan_if_qnan: + which = is_qnan(c->cls) ? 3 : 2; + break; + default: + g_assert_not_reached(); + } } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); + FloatClass cls[3] = { a->cls, b->cls, c->cls }; + Float3NaNPropRule rule = s->float_3nan_prop_rule; + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a three-input operation. -| For the moment we assume that no CPU needs the 'larger significand' -| information. -| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN -*----------------------------------------------------------------------------*/ -static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, bool have_snan, float_status *status) -{ - FloatClass cls[3] = { a_cls, b_cls, c_cls }; - Float3NaNPropRule rule = status->float_3nan_prop_rule; - int which; - - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify. - */ - assert(!status->default_nan_mode); - - if (infzero) { - /* - * Inf * 0 + NaN -- some implementations return the default NaN here, - * and some return the input NaN. - */ - switch (status->float_infzeronan_rule) { - case float_infzeronan_dnan_never: - return 2; - case float_infzeronan_dnan_always: - return 3; - case float_infzeronan_dnan_if_qnan: - return is_qnan(c_cls) ? 3 : 2; - default: - g_assert_not_reached(); - } - } - - assert(rule != float_3nan_prop_none); - if (have_snan && (rule & R_3NAN_SNAN_MASK)) { - /* We have at least one SNaN input and should prefer it */ - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); - } else { - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); - } - return which; -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remove "3" as a special case for which and simply branch to return the desired value. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, * But if we're not in default-NaN mode then the target must * specify. */ - which = 3; + goto default_nan; } else if (infzero) { /* * Inf * 0 + NaN -- some implementations return the @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, */ switch (s->float_infzeronan_rule) { case float_infzeronan_dnan_never: - which = 2; break; case float_infzeronan_dnan_always: - which = 3; - break; + goto default_nan; case float_infzeronan_dnan_if_qnan: - which = is_qnan(c->cls) ? 3 : 2; + if (is_qnan(c->cls)) { + goto default_nan; + } break; default: g_assert_not_reached(); } + which = 2; } else { FloatClass cls[3] = { a->cls, b->cls, c->cls }; Float3NaNPropRule rule = s->float_3nan_prop_rule; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } } - if (which == 3) { - parts_default_nan(a, s); - return a; - } - switch (which) { case 0: break; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, parts_silence_nan(a, s); } return a; + + default_nan: + parts_default_nan(a, s); + return a; } /* -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Assign the pointer return value to 'a' directly, rather than going through an intermediary index. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, FloatPartsN *c, float_status *s, int ab_mask, int abc_mask) { - int which; bool infzero = (ab_mask == float_cmask_infzero); bool have_snan = (abc_mask & float_cmask_snan); + FloatPartsN *ret; if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, default: g_assert_not_reached(); } - which = 2; + ret = c; } else { - FloatClass cls[3] = { a->cls, b->cls, c->cls }; + FloatPartsN *val[3] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); + } while (!is_snan(ret->cls)); } else { do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); + } while (!is_nan(ret->cls)); } } - switch (which) { - case 0: - break; - case 1: - a = b; - break; - case 2: - a = c; - break; - default: - g_assert_not_reached(); + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; default_nan: parts_default_nan(a, s); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> While all indices into val[] should be in [0-2], the mask applied is two bits. To help static analysis see there is no possibility of read beyond the end of the array, pad the array to 4 entries, with the final being (implicitly) NULL. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } ret = c; } else { - FloatPartsN *val[3] = { a, b, c }; + FloatPartsN *val[R_3NAN_1ST_MASK + 1] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This function is part of the public interface and is not "specialized" to any target in any way. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 52 ++++++++++++++++++++++++++++++++++ fpu/softfloat-specialize.c.inc | 52 ---------------------------------- 2 files changed, 52 insertions(+), 52 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, *zExpPtr = 1 - shiftCount; } +/*---------------------------------------------------------------------------- +| Takes two extended double-precision floating-point values `a' and `b', one +| of which is a NaN, and returns the appropriate NaN result. If either `a' or +| `b' is a signaling NaN, the invalid exception is raised. +*----------------------------------------------------------------------------*/ + +floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) +{ + bool aIsLargerSignificand; + FloatClass a_cls, b_cls; + + /* This is not complete, but is good enough for pickNaN. */ + a_cls = (!floatx80_is_any_nan(a) + ? float_class_normal + : floatx80_is_signaling_nan(a, status) + ? float_class_snan + : float_class_qnan); + b_cls = (!floatx80_is_any_nan(b) + ? float_class_normal + : floatx80_is_signaling_nan(b, status) + ? float_class_snan + : float_class_qnan); + + if (is_snan(a_cls) || is_snan(b_cls)) { + float_raise(float_flag_invalid, status); + } + + if (status->default_nan_mode) { + return floatx80_default_nan(status); + } + + if (a.low < b.low) { + aIsLargerSignificand = 0; + } else if (b.low < a.low) { + aIsLargerSignificand = 1; + } else { + aIsLargerSignificand = (a.high < b.high) ? 1 : 0; + } + + if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { + if (is_snan(b_cls)) { + return floatx80_silence_nan(b, status); + } + return b; + } else { + if (is_snan(a_cls)) { + return floatx80_silence_nan(a, status); + } + return a; + } +} + /*---------------------------------------------------------------------------- | Takes an abstract floating-point value having sign `zSign', exponent `zExp', | and extended significand formed by the concatenation of `zSig0' and `zSig1', diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ floatx80 floatx80_silence_nan(floatx80 a, float_status *status) return a; } -/*---------------------------------------------------------------------------- -| Takes two extended double-precision floating-point values `a' and `b', one -| of which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) -{ - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; - - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { - return floatx80_default_nan(status); - } - - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the quadruple-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Unpacking and repacking the parts may be slightly more work than we did before, but we get to reuse more code. For a code path handling exceptional values, this is an improvement. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241203203949.483774-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 43 +++++-------------------------------------- 1 file changed, 5 insertions(+), 38 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) { - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; + FloatParts128 pa, pb, *pr; - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { + if (!floatx80_unpack_canonical(&pa, a, status) || + !floatx80_unpack_canonical(&pb, b, status)) { return floatx80_default_nan(status); } - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } + pr = parts_pick_nan(&pa, &pb, status); + return floatx80_round_pack_canonical(pr, status); } /*---------------------------------------------------------------------------- -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaN into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 82 +++++++++++++++++++++++++---- fpu/softfloat-specialize.c.inc | 96 ---------------------------------- 2 files changed, 73 insertions(+), 105 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + int cmp, which; + if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } if (s->default_nan_mode) { parts_default_nan(a, s); - } else { - int cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } + return a; + } - if (pickNaN(a->cls, b->cls, cmp > 0, s)) { - a = b; - } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + + switch (s->float_2nan_prop_rule) { + case float_2nan_prop_s_ab: if (is_snan(a->cls)) { - parts_silence_nan(a, s); + which = 0; + } else if (is_snan(b->cls)) { + which = 1; + } else if (is_qnan(a->cls)) { + which = 0; + } else { + which = 1; } + break; + case float_2nan_prop_s_ba: + if (is_snan(b->cls)) { + which = 1; + } else if (is_snan(a->cls)) { + which = 0; + } else if (is_qnan(b->cls)) { + which = 1; + } else { + which = 0; + } + break; + case float_2nan_prop_ab: + which = is_nan(a->cls) ? 0 : 1; + break; + case float_2nan_prop_ba: + which = is_nan(b->cls) ? 1 : 0; + break; + case float_2nan_prop_x87: + /* + * This implements x87 NaN propagation rules: + * SNaN + QNaN => return the QNaN + * two SNaNs => return the one with the larger significand, silenced + * two QNaNs => return the one with the larger significand + * SNaN and a non-NaN => return the SNaN, silenced + * QNaN and a non-NaN => return the QNaN + * + * If we get down to comparing significands and they are the same, + * return the NaN with the positive sign bit (if any). + */ + if (is_snan(a->cls)) { + if (is_snan(b->cls)) { + which = cmp > 0 ? 0 : 1; + } else { + which = is_qnan(b->cls) ? 1 : 0; + } + } else if (is_qnan(a->cls)) { + if (is_snan(b->cls) || !is_qnan(b->cls)) { + which = 0; + } else { + which = cmp > 0 ? 0 : 1; + } + } else { + which = 1; + } + break; + default: + g_assert_not_reached(); + } + + if (which) { + a = b; + } + if (is_snan(a->cls)) { + parts_silence_nan(a, s); } return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ bool float32_is_signaling_nan(float32 a_, float_status *status) } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a two-input operation. -| IEEE754 doesn't specify all the details of this, so the -| algorithm is target-specific. -| The routine is passed various bits of information about the -| two NaNs and should return 0 to select NaN a and 1 for NaN b. -| Note that signalling NaNs are always squashed to quiet NaNs -| by the caller, by calling floatXX_silence_nan() before -| returning them. -| -| aIsLargerSignificand is only valid if both a and b are NaNs -| of some kind, and is true if a has the larger significand, -| or if both a and b have the same significand but a is -| positive but b is negative. It is only needed for the x87 -| tie-break rule. -*----------------------------------------------------------------------------*/ - -static int pickNaN(FloatClass a_cls, FloatClass b_cls, - bool aIsLargerSignificand, float_status *status) -{ - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify via set_float_2nan_prop_rule(). - */ - assert(!status->default_nan_mode); - - switch (status->float_2nan_prop_rule) { - case float_2nan_prop_s_ab: - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_s_ba: - if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_ab: - if (is_nan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_ba: - if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_x87: - /* - * This implements x87 NaN propagation rules: - * SNaN + QNaN => return the QNaN - * two SNaNs => return the one with the larger significand, silenced - * two QNaNs => return the one with the larger significand - * SNaN and a non-NaN => return the SNaN, silenced - * QNaN and a non-NaN => return the QNaN - * - * If we get down to comparing significands and they are the same, - * return the NaN with the positive sign bit (if any). - */ - if (is_snan(a_cls)) { - if (is_snan(b_cls)) { - return aIsLargerSignificand ? 0 : 1; - } - return is_qnan(b_cls) ? 1 : 0; - } else if (is_qnan(a_cls)) { - if (is_snan(b_cls) || !is_qnan(b_cls)) { - return 0; - } else { - return aIsLargerSignificand ? 0 : 1; - } - } else { - return 1; - } - default: - g_assert_not_reached(); - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remember if there was an SNaN, and use that to simplify float_2nan_prop_s_{ab,ba} to only the snan component. Then, fall through to the corresponding float_2nan_prop_{ab,ba} case to handle any remaining nans, which must be quiet. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + bool have_snan = false; int cmp, which; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); + have_snan = true; } if (s->default_nan_mode) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: - if (is_snan(a->cls)) { - which = 0; - } else if (is_snan(b->cls)) { - which = 1; - } else if (is_qnan(a->cls)) { - which = 0; - } else { - which = 1; + if (have_snan) { + which = is_snan(a->cls) ? 0 : 1; + break; } - break; - case float_2nan_prop_s_ba: - if (is_snan(b->cls)) { - which = 1; - } else if (is_snan(a->cls)) { - which = 0; - } else if (is_qnan(b->cls)) { - which = 1; - } else { - which = 0; - } - break; + /* fall through */ case float_2nan_prop_ab: which = is_nan(a->cls) ? 0 : 1; break; + case float_2nan_prop_s_ba: + if (have_snan) { + which = is_snan(b->cls) ? 1 : 0; + break; + } + /* fall through */ case float_2nan_prop_ba: which = is_nan(b->cls) ? 1 : 0; break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Move the fractional comparison to the end of the float_2nan_prop_x87 case. This is not required for any other 2nan propagation rule. Reorganize the x87 case itself to break out of the switch when the fractional comparison is not required. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, return a; } - cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } - switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, * return the NaN with the positive sign bit (if any). */ if (is_snan(a->cls)) { - if (is_snan(b->cls)) { - which = cmp > 0 ? 0 : 1; - } else { + if (!is_snan(b->cls)) { which = is_qnan(b->cls) ? 1 : 0; + break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { which = 0; - } else { - which = cmp > 0 ? 0 : 1; + break; } } else { which = 1; + break; } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + which = cmp > 0 ? 0 : 1; break; default: g_assert_not_reached(); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Replace the "index" selecting between A and B with a result variable of the proper type. This improves clarity within the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { bool have_snan = false; - int cmp, which; + FloatPartsN *ret; + int cmp; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { - which = is_snan(a->cls) ? 0 : 1; + ret = is_snan(a->cls) ? a : b; break; } /* fall through */ case float_2nan_prop_ab: - which = is_nan(a->cls) ? 0 : 1; + ret = is_nan(a->cls) ? a : b; break; case float_2nan_prop_s_ba: if (have_snan) { - which = is_snan(b->cls) ? 1 : 0; + ret = is_snan(b->cls) ? b : a; break; } /* fall through */ case float_2nan_prop_ba: - which = is_nan(b->cls) ? 1 : 0; + ret = is_nan(b->cls) ? b : a; break; case float_2nan_prop_x87: /* @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, */ if (is_snan(a->cls)) { if (!is_snan(b->cls)) { - which = is_qnan(b->cls) ? 1 : 0; + ret = is_qnan(b->cls) ? b : a; break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { - which = 0; + ret = a; break; } } else { - which = 1; + ret = b; break; } cmp = frac_cmp(a, b); if (cmp == 0) { cmp = a->sign < b->sign; } - which = cmp > 0 ? 0 : 1; + ret = cmp > 0 ? a : b; break; default: g_assert_not_reached(); } - if (which) { - a = b; + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; } static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> I'm migrating to Qualcomm's new open source email infrastructure, so update my email address, and update the mailmap to match. Signed-off-by: Leif Lindholm <leif.lindholm@oss.qualcomm.com> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241205114047.1125842-1-leif.lindholm@oss.qualcomm.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- .mailmap | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <quic_llindhol@quicinc.com> +R: Leif Lindholm <leif.lindholm@oss.qualcomm.com> R: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> L: qemu-arm@nongnu.org S: Maintained diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> Juan Quintela <quintela@trasno.org> <quintela@redhat.com> -Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> -Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <quic_llindhol@quicinc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif.lindholm@linaro.org> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif@nuviainc.com> Luc Michel <luc@lmichel.fr> <luc.michel@git.antfield.fr> Luc Michel <luc@lmichel.fr> <luc.michel@greensocs.com> Luc Michel <luc@lmichel.fr> <lmichel@kalray.eu> -- 2.34.1 From: Vikram Garhwal <vikram.garhwal@bytedance.com> Previously, maintainer role was paused due to inactive email id. Commit id: c009d715721861984c4987bcc78b7ee183e86d75. Signed-off-by: Vikram Garhwal <vikram.garhwal@bytedance.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20241204184205.12952-1-vikram.garhwal@bytedance.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: tests/qtest/fuzz-sb16-test.c Xilinx CAN M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained F: hw/net/can/xlnx-* F: include/hw/net/xlnx-* @@ -XXX,XX +XXX,XX @@ F: include/hw/rx/ CAN bus subsystem and hardware M: Pavel Pisa <pisa@cmp.felk.cvut.cz> M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained W: https://canbus.pages.fel.cvut.cz/ F: net/can/* -- 2.34.1