Nothing too exciting, but does include the last bits of v8.1M support work. -- PMM The following changes since commit e79de63ab1bd1f6550e7b915e433bec1ad1a870a: Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210107' into staging (2021-01-07 20:34:05 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210108 for you to fetch changes up to c9f8511ea8d2b80723af0fea1f716d752c1b5208: docs/system: arm: Add sabrelite board description (2021-01-08 15:13:39 +0000) ---------------------------------------------------------------- target-arm queue: * intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs * target/arm: Fix MTE0_ACTIVE * target/arm: Implement v8.1M and Cortex-M55 model * hw/arm/highbank: Drop dead KVM support code * util/qemu-timer: Make timer_free() imply timer_del() * various devices: Use ptimer_free() in finalize function * docs/system: arm: Add sabrelite board description * sabrelite: Minor fixes to allow booting U-Boot ---------------------------------------------------------------- Andrew Jones (1): hw/arm/virt: Remove virt machine state 'smp_cpus' Bin Meng (4): hw/misc: imx6_ccm: Update PMU_MISC0 reset value hw/msic: imx6_ccm: Correct register value for silicon type hw/arm: sabrelite: Connect the Ethernet PHY at address 6 docs/system: arm: Add sabrelite board description Edgar E. Iglesias (1): intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs Gan Qixin (7): digic-timer: Use ptimer_free() in the finalize function to avoid memleaks allwinner-a10-pit: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_rtc: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_pwm: Use ptimer_free() in the finalize function to avoid memleaks mss-timer: Use ptimer_free() in the finalize function to avoid memleaks musicpal: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_mct: Use ptimer_free() in the finalize function to avoid memleaks Peter Maydell (9): hw/intc/armv7m_nvic: Correct handling of CCR.BFHFNMIGN target/arm: Correct store of FPSCR value via FPCXT_S target/arm: Implement FPCXT_NS fp system register target/arm: Implement Cortex-M55 model hw/arm/highbank: Drop dead KVM support code util/qemu-timer: Make timer_free() imply timer_del() scripts/coccinelle: New script to remove unnecessary timer_del() calls Remove superfluous timer_del() calls target/arm: Remove timer_del()/timer_deinit() before timer_free() Richard Henderson (1): target/arm: Fix MTE0_ACTIVE docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++ include/hw/arm/virt.h | 3 +- include/qemu/timer.h | 24 +++--- block/iscsi.c | 2 - block/nbd.c | 1 - block/qcow2.c | 1 - hw/arm/highbank.c | 14 +-- hw/arm/musicpal.c | 12 +++ hw/arm/sabrelite.c | 4 + hw/arm/virt-acpi-build.c | 9 +- hw/arm/virt.c | 21 +++-- hw/block/nvme.c | 2 - hw/char/serial.c | 2 - hw/char/virtio-serial-bus.c | 2 - hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/arm_gic.c | 4 +- hw/intc/armv7m_nvic.c | 15 ++++ hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/misc/imx6_ccm.c | 4 +- hw/net/e1000.c | 3 - hw/net/e1000e_core.c | 8 -- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 - hw/rtc/exynos4210_rtc.c | 9 ++ hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 - hw/timer/allwinner-a10-pit.c | 11 +++ hw/timer/digic-timer.c | 8 ++ hw/timer/exynos4210_mct.c | 14 +++ hw/timer/exynos4210_pwm.c | 11 +++ hw/timer/mss-timer.c | 13 +++ hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/arm/cpu.c | 2 - target/arm/cpu_tcg.c | 42 +++++++++ target/arm/helper.c | 2 +- target/s390x/cpu.c | 2 - ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - target/arm/translate-vfp.c.inc | 114 ++++++++++++++++++++++-- 65 files changed, 421 insertions(+), 111 deletions(-) create mode 100644 docs/system/arm/sabrelite.rst create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Correct the indexing into s->cpu_ctlr for vCPUs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20201214222154.3480243-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline void gic_get_best_virq(GICState *s, int cpu, static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, int group_mask) { + int cpu_iface = virt ? (cpu + GIC_NCPU) : cpu; + if (!virt && !(s->ctlr & group_mask)) { return false; } @@ -XXX,XX +XXX,XX @@ static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, return false; } - if (!(s->cpu_ctlr[cpu] & group_mask)) { + if (!(s->cpu_ctlr[cpu_iface] & group_mask)) { return false; } -- 2.20.1 From: Andrew Jones <drjones@redhat.com> virt machine's 'smp_cpus' and machine->smp.cpus must always have the same value. And, anywhere we have virt machine state we have machine state. So let's remove the redundancy. Also, to make it easier to see that machine->smp is the true source for "smp_cpus" and "max_cpus", avoid passing them in function parameters, preferring instead to get them from the state. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20201215174815.51520-1-drjones@redhat.com [PMM: minor formatting tweak to smp_cpus variable declaration] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 3 +-- hw/arm/virt-acpi-build.c | 9 +++++---- hw/arm/virt.c | 21 ++++++++++----------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { MemMapEntry *memmap; char *pciehb_nodename; const int *irqmap; - int smp_cpus; void *fdt; int fdt_size; uint32_t clock_phandle; @@ -XXX,XX +XXX,XX @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) assert(vms->gic_version == VIRT_GIC_VERSION_3); - return vms->smp_cpus > redist0_capacity ? 2 : 1; + return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1; } #endif /* QEMU_ARM_VIRT_H */ diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #define ACPI_BUILD_TABLE_SIZE 0x20000 -static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) +static void acpi_dsdt_add_cpus(Aml *scope, VirtMachineState *vms) { + MachineState *ms = MACHINE(vms); uint16_t i; - for (i = 0; i < smp_cpus; i++) { + for (i = 0; i < ms->smp.cpus; i++) { Aml *dev = aml_device("C%.03X", i); aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0007"))); aml_append(dev, aml_name_decl("_UID", aml_int(i))); @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) gicd->base_address = cpu_to_le64(memmap[VIRT_GIC_DIST].base); gicd->version = vms->gic_version; - for (i = 0; i < vms->smp_cpus; i++) { + for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { AcpiMadtGenericCpuInterface *gicc = acpi_data_push(table_data, sizeof(*gicc)); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * the RTC ACPI device at all when using UEFI. */ scope = aml_scope("\\_SB"); - acpi_dsdt_add_cpus(scope, vms->smp_cpus); + acpi_dsdt_add_cpus(scope, vms); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); if (vmc->acpi_expose_flash) { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/timer"); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) int cpu; int addr_cells = 1; const MachineState *ms = MACHINE(vms); + int smp_cpus = ms->smp.cpus; /* * From Documentation/devicetree/bindings/arm/cpus.txt @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) * The simplest way to go is to examine affinity IDs of all our CPUs. If * at least one of them has Aff3 populated, we set #address-cells to 2. */ - for (cpu = 0; cpu < vms->smp_cpus; cpu++) { + for (cpu = 0; cpu < smp_cpus; cpu++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); if (armcpu->mp_affinity & ARM_AFF3_MASK) { @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#address-cells", addr_cells); qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#size-cells", 0x0); - for (cpu = vms->smp_cpus - 1; cpu >= 0; cpu--) { + for (cpu = smp_cpus - 1; cpu >= 0; cpu--) { char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); CPUState *cs = CPU(armcpu); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", armcpu->dtb_compatible); - if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED - && vms->smp_cpus > 1) { + if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED && smp_cpus > 1) { qemu_fdt_setprop_string(vms->fdt, nodename, "enable-method", "psci"); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/pmu"); @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) * virt_cpu_post_init() must be called after the CPUs have * been realized and the GIC has been created. */ -static void virt_cpu_post_init(VirtMachineState *vms, int max_cpus, - MemoryRegion *sysmem) +static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) { + int max_cpus = MACHINE(vms)->smp.max_cpus; bool aarch64, pmu, steal_time; CPUState *cpu; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } - vms->smp_cpus = smp_cpus; - if (vms->virt && kvm_enabled()) { error_report("mach-virt: KVM does not support providing " "Virtualization extensions to the guest CPU"); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_fdt(vms); possible_cpus = mc->possible_cpu_arch_ids(machine); + assert(possible_cpus->len == max_cpus); for (n = 0; n < possible_cpus->len; n++) { Object *cpuobj; CPUState *cs; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gic(vms); - virt_cpu_post_init(vms, possible_cpus->len, sysmem); + virt_cpu_post_init(vms, sysmem); fdt_add_pmu_nodes(vms); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In 50244cc76abc we updated mte_check_fail to match the ARM pseudocode, using the correct EL to select the TCF field. But we failed to update MTE0_ACTIVE the same way, which led to g_assert_not_reached(). Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/bugs/1907137 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201221204426.88514-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, if (FIELD_EX32(flags, TBFLAG_A64, UNPRIV) && tbid && !(env->pstate & PSTATE_TCO) - && (sctlr & SCTLR_TCF0) + && (sctlr & SCTLR_TCF) && allocation_tag_access_enabled(env, 0, sctlr)) { flags = FIELD_DP32(flags, TBFLAG_A64, MTE0_ACTIVE, 1); } -- 2.20.1 The CCR is a register most of whose bits are banked between security states but where BFHFNMIGN is not, and we keep it in the non-secure entry of the v7m.ccr[] array. The logic which tries to handle this bit fails to implement the "RAZ/WI from Nonsecure if AIRCR.BFHFNMINS is zero" requirement; correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-2-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) */ val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + /* BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0 */ + if (!attrs.secure) { + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + val &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } + } return val; case 0xd24: /* System Handler Control and State (SHCSR) */ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (cpu->env.v7m.ccr[M_REG_NS] & ~R_V7M_CCR_BFHFNMIGN_MASK) | (value & R_V7M_CCR_BFHFNMIGN_MASK); value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } else { + /* + * BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0, so + * preserve the state currently in the NS element of the array + */ + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + value |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + } } cpu->env.v7m.ccr[attrs.secure] = value; -- 2.20.1 In commit 64f863baeedc8659 we implemented the v8.1M FPCXT_S register, but we got the write behaviour wrong. On read, this register reads bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't just write back those bits -- it writes a value to the whole FPSCR, whose upper 4 bits are zeroes. We also incorrectly implemented the write-to-FPSCR as a simple store to vfp.xregs; this skips the "update the softfloat flags" part of the vfp_set_fpscr helper so the value would read back correctly but not actually take effect. Fix both of these things by doing a complete write to the FPSCR using the helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-3-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, } case ARM_VFP_FPCXT_S: { - TCGv_i32 sfpa, control, fpscr; - /* Set FPSCR[27:0] and CONTROL.SFPA from value */ + TCGv_i32 sfpa, control; + /* + * Set FPSCR and CONTROL.SFPA from value; the new FPSCR takes + * bits [27:0] from value and zeroes bits [31:28]. + */ tmp = loadfn(s, opaque); sfpa = tcg_temp_new_i32(); tcg_gen_shri_i32(sfpa, tmp, 31); @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_gen_deposit_i32(control, control, sfpa, R_V7M_CONTROL_SFPA_SHIFT, 1); store_cpu_field(control, v7m.control[M_REG_S]); - fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(fpscr, fpscr, FPCR_NZCV_MASK); tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); - tcg_gen_or_i32(fpscr, fpscr, tmp); - store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + gen_helper_vfp_set_fpscr(cpu_env, tmp); tcg_temp_free_i32(tmp); tcg_temp_free_i32(sfpa); break; -- 2.20.1 Implement the v8.1M FPCXT_NS floating-point system register. This is a little more complicated than FPCXT_S, because it has specific handling for "current FP state is inactive", and it only wants to do PreserveFPState(), not the full set of actions done by ExecuteFPCheck() which vfp_access_check() implements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-4-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 102 ++++++++++++++++++++++++++++++++- 1 file changed, 99 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) } break; case ARM_VFP_FPCXT_S: + case ARM_VFP_FPCXT_NS: if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { return false; } @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return FPSysRegCheckFailed; } - if (!vfp_access_check(s)) { + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * So we don't call vfp_access_check() and the callers must handle this. + */ + if (regno != ARM_VFP_FPCXT_NS && !vfp_access_check(s)) { return FPSysRegCheckDone; } - return FPSysRegCheckContinue; } +static void gen_branch_fpInactive(DisasContext *s, TCGCond cond, + TCGLabel *label) +{ + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * We don't have a TB flag that matches the fpInactive check, so we + * do it at runtime as we don't expect FPCXT_NS accesses to be frequent. + * + * Emit code that checks fpInactive and does a conditional + * branch to label based on it: + * if cond is TCG_COND_NE then branch if fpInactive != 0 (ie if inactive) + * if cond is TCG_COND_EQ then branch if fpInactive == 0 (ie if active) + */ + assert(cond == TCG_COND_EQ || cond == TCG_COND_NE); + + /* fpInactive = FPCCR_NS.ASPEN == 1 && CONTROL.FPCA == 0 */ + TCGv_i32 aspen, fpca; + aspen = load_cpu_field(v7m.fpccr[M_REG_NS]); + fpca = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_xori_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_andi_i32(fpca, fpca, R_V7M_CONTROL_FPCA_MASK); + tcg_gen_or_i32(fpca, fpca, aspen); + tcg_gen_brcondi_i32(tcg_invert_cond(cond), fpca, 0, label); + tcg_temp_free_i32(aspen); + tcg_temp_free_i32(fpca); +} + static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, fp_sysreg_loadfn *loadfn, @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, { /* Do a write to an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); break; } + case ARM_VFP_FPCXT_NS: + lab_end = gen_new_label(); + /* fpInactive case: write is a NOP, so branch to end */ + gen_branch_fpInactive(s, TCG_COND_NE, lab_end); + /* !fpInactive: PreserveFPState(), and reads same as FPCXT_S */ + gen_preserve_fp_state(s); + /* fall through */ case ARM_VFP_FPCXT_S: { TCGv_i32 sfpa, control; @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, default: g_assert_not_reached(); } + if (lab_end) { + gen_set_label(lab_end); + } return true; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, { /* Do a read from an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; + bool lookup_tb = false; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, fpscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); gen_helper_vfp_set_fpscr(cpu_env, fpscr); tcg_temp_free_i32(fpscr); - gen_lookup_tb(s); + lookup_tb = true; + break; + } + case ARM_VFP_FPCXT_NS: + { + TCGv_i32 control, sfpa, fpscr, fpdscr, zero; + TCGLabel *lab_active = gen_new_label(); + + lookup_tb = true; + + gen_branch_fpInactive(s, TCG_COND_EQ, lab_active); + /* fpInactive case: reads as FPDSCR_NS */ + TCGv_i32 tmp = load_cpu_field(v7m.fpdscr[M_REG_NS]); + storefn(s, opaque, tmp); + lab_end = gen_new_label(); + tcg_gen_br(lab_end); + + gen_set_label(lab_active); + /* !fpInactive: Reads the same as FPCXT_S, but side effects differ */ + gen_preserve_fp_state(s); + tmp = tcg_temp_new_i32(); + sfpa = tcg_temp_new_i32(); + fpscr = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(fpscr, cpu_env); + tcg_gen_andi_i32(tmp, fpscr, ~FPCR_NZCV_MASK); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(sfpa, control, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_shli_i32(sfpa, sfpa, 31 - R_V7M_CONTROL_SFPA_SHIFT); + tcg_gen_or_i32(tmp, tmp, sfpa); + tcg_temp_free_i32(control); + /* Store result before updating FPSCR, in case it faults */ + storefn(s, opaque, tmp); + /* If SFPA is zero then set FPSCR from FPDSCR_NS */ + fpdscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); + zero = tcg_const_i32(0); + tcg_gen_movcond_i32(TCG_COND_EQ, fpscr, sfpa, zero, fpdscr, fpscr); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(zero); + tcg_temp_free_i32(sfpa); + tcg_temp_free_i32(fpdscr); + tcg_temp_free_i32(fpscr); break; } default: g_assert_not_reached(); } + + if (lab_end) { + gen_set_label(lab_end); + } + if (lookup_tb) { + gen_lookup_tb(s); + } return true; } -- 2.20.1 Now that we have implemented all the features needed by the v8.1M architecture, we can add the model of the Cortex-M55. This is the configuration without MVE support; we'll add MVE later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-5-peter.maydell@linaro.org --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) cpu->ctr = 0x8000c000; } +static void cortex_m55_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_V8_1M); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd221; /* r0p1 */ + cpu->revidr = 0; + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + /* + * These are the MVFR* values for the FPU, no MVE configuration; + * we will update them later when we implement MVE + */ + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12100011; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x20000030; + cpu->isar.id_pfr1 = 0x00000230; + cpu->isar.id_dfr0 = 0x10200000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00111040; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000011; + cpu->isar.id_isar0 = 0x01103110; + cpu->isar.id_isar1 = 0x02212000; + cpu->isar.id_isar2 = 0x20232232; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; + cpu->clidr = 0x00000000; /* caches not implemented */ + cpu->ctr = 0x8303c003; +} + static const ARMCPRegInfo cortexr5_cp_reginfo[] = { /* Dummy the TCM region regs for the moment */ { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m33", .initfn = cortex_m33_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m55", .initfn = cortex_m55_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, -- 2.20.1 Support for running KVM on 32-bit Arm hosts was removed in commit 82bf7ae84ce739e. You can still run a 32-bit guest on a 64-bit Arm host CPU, but because Arm KVM requires the host and guest CPU types to match, it is not possible to run a guest that requires a Cortex-A9 or Cortex-A15 CPU there. That means that the code in the highbank/midway board models to support KVM is no longer used, and we can delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201215144215.28482-1-peter.maydell@linaro.org --- hw/arm/highbank.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/boot.h" #include "hw/loader.h" #include "net/net.h" -#include "sysemu/kvm.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a15mpcore.h" #include "qemu/log.h" #include "qom/object.h" +#include "cpu.h" #define SMP_BOOT_ADDR 0x100 #define SMP_BOOT_REG 0x40 @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) highbank_binfo.loader_start = 0; highbank_binfo.write_secondary_boot = hb_write_secondary; highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary; - if (!kvm_enabled()) { - highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; - highbank_binfo.write_board_setup = hb_write_board_setup; - highbank_binfo.secure_board_setup = true; - } else { - warn_report("cannot load built-in Monitor support " - "if KVM is enabled. Some guests (such as Linux) " - "may not boot."); - } + highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; + highbank_binfo.write_board_setup = hb_write_board_setup; + highbank_binfo.secure_board_setup = true; arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo); } -- 2.20.1 Currently timer_free() is a simple wrapper for g_free(). This means that the timer being freed must not be currently active, as otherwise QEMU might crash later when the active list is processed and still has a pointer to freed memory on it. As a result almost all calls to timer_free() are preceded by a timer_del() call, as can be seen in the output of git grep -B1 '\<timer_free\>' This is unfortunate API design as it makes it easy to accidentally misuse (by forgetting the timer_del()), and the correct use is annoyingly verbose. Make timer_free() imply a timer_del(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-2-peter.maydell@linaro.org --- include/qemu/timer.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/include/qemu/timer.h b/include/qemu/timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/timer.h +++ b/include/qemu/timer.h @@ -XXX,XX +XXX,XX @@ static inline QEMUTimer *timer_new_ms(QEMUClockType type, QEMUTimerCB *cb, */ void timer_deinit(QEMUTimer *ts); -/** - * timer_free: - * @ts: the timer - * - * Free a timer (it must not be on the active list) - */ -static inline void timer_free(QEMUTimer *ts) -{ - g_free(ts); -} - /** * timer_del: * @ts: the timer @@ -XXX,XX +XXX,XX @@ static inline void timer_free(QEMUTimer *ts) */ void timer_del(QEMUTimer *ts); +/** + * timer_free: + * @ts: the timer + * + * Free a timer. This will call timer_del() for you to remove + * the timer from the active list if it was still active. + */ +static inline void timer_free(QEMUTimer *ts) +{ + timer_del(ts); + g_free(ts); +} + /** * timer_mod_ns: * @ts: the timer -- 2.20.1 Now that timer_free() implicitly calls timer_del(), sequences timer_del(mytimer); timer_free(mytimer); can be simplified to just timer_free(mytimer); Add a Coccinelle script to do this transformation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-3-peter.maydell@linaro.org --- scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci diff --git a/scripts/coccinelle/timer-del-timer-free.cocci b/scripts/coccinelle/timer-del-timer-free.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/timer-del-timer-free.cocci @@ -XXX,XX +XXX,XX @@ +// Remove superfluous timer_del() calls +// +// Copyright Linaro Limited 2020 +// This work is licensed under the terms of the GNU GPLv2 or later. +// +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/timer-del-timer-free.cocci \ +// --in-place --dir . +// +// The timer_free() function now implicitly calls timer_del() +// for you, so calls to timer_del() immediately before the +// timer_free() of the same timer can be deleted. + +@@ +expression T; +@@ +-timer_del(T); + timer_free(T); -- 2.20.1 This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org --- block/iscsi.c | 2 -- block/nbd.c | 1 - block/qcow2.c | 1 - hw/block/nvme.c | 2 -- hw/char/serial.c | 2 -- hw/char/virtio-serial-bus.c | 2 -- hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/net/e1000.c | 3 --- hw/net/e1000e_core.c | 8 -------- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 -- hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 -- hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/s390x/cpu.c | 2 -- ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - 42 files changed, 58 deletions(-) diff --git a/block/iscsi.c b/block/iscsi.c index XXXXXXX..XXXXXXX 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -XXX,XX +XXX,XX @@ static void iscsi_detach_aio_context(BlockDriverState *bs) iscsilun->events = 0; if (iscsilun->nop_timer) { - timer_del(iscsilun->nop_timer); timer_free(iscsilun->nop_timer); iscsilun->nop_timer = NULL; } if (iscsilun->event_timer) { - timer_del(iscsilun->event_timer); timer_free(iscsilun->event_timer); iscsilun->event_timer = NULL; } diff --git a/block/nbd.c b/block/nbd.c index XXXXXXX..XXXXXXX 100644 --- a/block/nbd.c +++ b/block/nbd.c @@ -XXX,XX +XXX,XX @@ static void nbd_recv_coroutines_wake_all(BDRVNBDState *s) static void reconnect_delay_timer_del(BDRVNBDState *s) { if (s->reconnect_delay_timer) { - timer_del(s->reconnect_delay_timer); timer_free(s->reconnect_delay_timer); s->reconnect_delay_timer = NULL; } diff --git a/block/qcow2.c b/block/qcow2.c index XXXXXXX..XXXXXXX 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -XXX,XX +XXX,XX @@ static void cache_clean_timer_del(BlockDriverState *bs) { BDRVQcow2State *s = bs->opaque; if (s->cache_clean_timer) { - timer_del(s->cache_clean_timer); timer_free(s->cache_clean_timer); s->cache_clean_timer = NULL; } diff --git a/hw/block/nvme.c b/hw/block/nvme.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/nvme.c +++ b/hw/block/nvme.c @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_sq(NvmeSQueue *sq, NvmeCtrl *n) { n->sq[sq->sqid] = NULL; - timer_del(sq->timer); timer_free(sq->timer); g_free(sq->io_req); if (sq->sqid) { @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_get_log(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_cq(NvmeCQueue *cq, NvmeCtrl *n) { n->cq[cq->cqid] = NULL; - timer_del(cq->timer); timer_free(cq->timer); msix_vector_unuse(&n->parent_obj, cq->vector); if (cq->cqid) { diff --git a/hw/char/serial.c b/hw/char/serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/serial.c +++ b/hw/char/serial.c @@ -XXX,XX +XXX,XX @@ static void serial_unrealize(DeviceState *dev) qemu_chr_fe_deinit(&s->chr, false); - timer_del(s->modem_status_poll); timer_free(s->modem_status_poll); - timer_del(s->fifo_timeout_timer); timer_free(s->fifo_timeout_timer); fifo8_destroy(&s->recv_fifo); diff --git a/hw/char/virtio-serial-bus.c b/hw/char/virtio-serial-bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/virtio-serial-bus.c +++ b/hw/char/virtio-serial-bus.c @@ -XXX,XX +XXX,XX @@ static void virtio_serial_post_load_timer_cb(void *opaque) } } g_free(s->post_load->connected); - timer_del(s->post_load->timer); timer_free(s->post_load->timer); g_free(s->post_load); s->post_load = NULL; @@ -XXX,XX +XXX,XX @@ static void virtio_serial_device_unrealize(DeviceState *dev) g_free(vser->ports_map); if (vser->post_load) { g_free(vser->post_load->connected); - timer_del(vser->post_load->timer); timer_free(vser->post_load->timer); g_free(vser->post_load); } diff --git a/hw/ide/core.c b/hw/ide/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/core.c +++ b/hw/ide/core.c @@ -XXX,XX +XXX,XX @@ void ide_init2(IDEBus *bus, qemu_irq irq) void ide_exit(IDEState *s) { - timer_del(s->sector_write_timer); timer_free(s->sector_write_timer); qemu_vfree(s->smart_selftest_data); qemu_vfree(s->io_buffer); diff --git a/hw/input/hid.c b/hw/input/hid.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/hid.c +++ b/hw/input/hid.c @@ -XXX,XX +XXX,XX @@ static void hid_idle_timer(void *opaque) static void hid_del_idle_timer(HIDState *hs) { if (hs->idle_timer) { - timer_del(hs->idle_timer); timer_free(hs->idle_timer); hs->idle_timer = NULL; } diff --git a/hw/intc/apic.c b/hw/intc/apic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/apic.c +++ b/hw/intc/apic.c @@ -XXX,XX +XXX,XX @@ static void apic_unrealize(DeviceState *dev) { APICCommonState *s = APIC(dev); - timer_del(s->timer); timer_free(s->timer); local_apics[s->id] = NULL; } diff --git a/hw/intc/ioapic.c b/hw/intc/ioapic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/ioapic.c +++ b/hw/intc/ioapic.c @@ -XXX,XX +XXX,XX @@ static void ioapic_unrealize(DeviceState *dev) { IOAPICCommonState *s = IOAPIC_COMMON(dev); - timer_del(s->delayed_ioapic_service_timer); timer_free(s->delayed_ioapic_service_timer); } diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ipmi/ipmi_bmc_extern.c +++ b/hw/ipmi/ipmi_bmc_extern.c @@ -XXX,XX +XXX,XX @@ static void ipmi_bmc_extern_finalize(Object *obj) { IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(obj); - timer_del(ibe->extern_timer); timer_free(ibe->extern_timer); } diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ pci_e1000_uninit(PCIDevice *dev) { E1000State *d = E1000(dev); - timer_del(d->autoneg_timer); timer_free(d->autoneg_timer); - timer_del(d->mit_timer); timer_free(d->mit_timer); - timer_del(d->flush_queue_timer); timer_free(d->flush_queue_timer); qemu_del_nic(d->nic); } diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e_core.c +++ b/hw/net/e1000e_core.c @@ -XXX,XX +XXX,XX @@ e1000e_intrmgr_pci_unint(E1000ECore *core) { int i; - timer_del(core->radv.timer); timer_free(core->radv.timer); - timer_del(core->rdtr.timer); timer_free(core->rdtr.timer); - timer_del(core->raid.timer); timer_free(core->raid.timer); - timer_del(core->tadv.timer); timer_free(core->tadv.timer); - timer_del(core->tidv.timer); timer_free(core->tidv.timer); - timer_del(core->itr.timer); timer_free(core->itr.timer); for (i = 0; i < E1000E_MSIX_VEC_NUM; i++) { - timer_del(core->eitr[i].timer); timer_free(core->eitr[i].timer); } } @@ -XXX,XX +XXX,XX @@ e1000e_core_pci_uninit(E1000ECore *core) { int i; - timer_del(core->autoneg_timer); timer_free(core->autoneg_timer); e1000e_intrmgr_pci_unint(core); diff --git a/hw/net/pcnet-pci.c b/hw/net/pcnet-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/pcnet-pci.c +++ b/hw/net/pcnet-pci.c @@ -XXX,XX +XXX,XX @@ static void pci_pcnet_uninit(PCIDevice *dev) PCIPCNetState *d = PCI_PCNET(dev); qemu_free_irq(d->state.irq); - timer_del(d->state.poll_timer); timer_free(d->state.poll_timer); qemu_del_nic(d->state.nic); } diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -XXX,XX +XXX,XX @@ static void pci_rtl8139_uninit(PCIDevice *dev) g_free(s->cplus_txbuffer); s->cplus_txbuffer = NULL; - timer_del(s->timer); timer_free(s->timer); qemu_del_nic(s->nic); } diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/spapr_llan.c +++ b/hw/net/spapr_llan.c @@ -XXX,XX +XXX,XX @@ static void spapr_vlan_instance_finalize(Object *obj) } if (dev->rxp_timer) { - timer_del(dev->rxp_timer); timer_free(dev->rxp_timer); } } diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -XXX,XX +XXX,XX @@ static void virtio_net_rsc_cleanup(VirtIONet *n) g_free(seg); } - timer_del(chain->drain_timer); timer_free(chain->drain_timer); QTAILQ_REMOVE(&n->rsc_chains, chain, next); g_free(chain); @@ -XXX,XX +XXX,XX @@ static void virtio_net_del_queue(VirtIONet *n, int index) virtio_del_queue(vdev, index * 2); if (q->tx_timer) { - timer_del(q->tx_timer); timer_free(q->tx_timer); q->tx_timer = NULL; } else { diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ void pci_dereg_ioat(S390PCIIOMMU *iommu) void fmb_timer_free(S390PCIBusDevice *pbdev) { if (pbdev->fmb_timer) { - timer_del(pbdev->fmb_timer); timer_free(pbdev->fmb_timer); pbdev->fmb_timer = NULL; } diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_instance_finalize(Object *obj) { SDState *sd = SD_CARD(obj); - timer_del(sd->ocr_power_timer); timer_free(sd->ocr_power_timer); } diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ void sdhci_initfn(SDHCIState *s) void sdhci_uninitfn(SDHCIState *s) { - timer_del(s->insert_timer); timer_free(s->insert_timer); - timer_del(s->transfer_timer); timer_free(s->transfer_timer); g_free(s->fifo_buffer); diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-hub.c +++ b/hw/usb/dev-hub.c @@ -XXX,XX +XXX,XX @@ static void usb_hub_unrealize(USBDevice *dev) &s->ports[i].port); } - timer_del(s->port_timer); timer_free(s->port_timer); } diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.c +++ b/hw/usb/hcd-ehci.c @@ -XXX,XX +XXX,XX @@ void usb_ehci_unrealize(EHCIState *s, DeviceState *dev) trace_usb_ehci_unrealize(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-ohci-pci.c b/hw/usb/hcd-ohci-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ohci-pci.c +++ b/hw/usb/hcd-ohci-pci.c @@ -XXX,XX +XXX,XX @@ static void usb_ohci_exit(PCIDevice *dev) usb_bus_release(&s->bus); } - timer_del(s->eof_timer); timer_free(s->eof_timer); } diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-uhci.c +++ b/hw/usb/hcd-uhci.c @@ -XXX,XX +XXX,XX @@ static void usb_uhci_exit(PCIDevice *dev) trace_usb_uhci_exit(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-xhci.c +++ b/hw/usb/hcd-xhci.c @@ -XXX,XX +XXX,XX @@ static void usb_xhci_unrealize(DeviceState *dev) } if (xhci->mfwrap_timer) { - timer_del(xhci->mfwrap_timer); timer_free(xhci->mfwrap_timer); xhci->mfwrap_timer = NULL; } diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/redirect.c +++ b/hw/usb/redirect.c @@ -XXX,XX +XXX,XX @@ static void usbredir_unrealize(USBDevice *udev) qemu_bh_delete(dev->chardev_close_bh); qemu_bh_delete(dev->device_reject_bh); - timer_del(dev->attach_timer); timer_free(dev->attach_timer); usbredir_cleanup_device_queues(dev); diff --git a/hw/vfio/display.c b/hw/vfio/display.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/display.c +++ b/hw/vfio/display.c @@ -XXX,XX +XXX,XX @@ static void vfio_display_edid_exit(VFIODisplay *dpy) g_free(dpy->edid_regs); g_free(dpy->edid_blob); - timer_del(dpy->edid_link_timer); timer_free(dpy->edid_link_timer); } diff --git a/hw/virtio/vhost-vsock-common.c b/hw/virtio/vhost-vsock-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost-vsock-common.c +++ b/hw/virtio/vhost-vsock-common.c @@ -XXX,XX +XXX,XX @@ static void vhost_vsock_common_post_load_timer_cleanup(VHostVSockCommon *vvc) return; } - timer_del(vvc->post_load_timer); timer_free(vvc->post_load_timer); vvc->post_load_timer = NULL; } diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -XXX,XX +XXX,XX @@ static bool balloon_stats_enabled(const VirtIOBalloon *s) static void balloon_stats_destroy_timer(VirtIOBalloon *s) { if (balloon_stats_enabled(s)) { - timer_del(s->stats_timer); timer_free(s->stats_timer); s->stats_timer = NULL; s->stats_poll_interval = 0; diff --git a/hw/virtio/virtio-rng.c b/hw/virtio/virtio-rng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-rng.c +++ b/hw/virtio/virtio-rng.c @@ -XXX,XX +XXX,XX @@ static void virtio_rng_device_unrealize(DeviceState *dev) VirtIORNG *vrng = VIRTIO_RNG(dev); qemu_del_vm_change_state_handler(vrng->vmstate); - timer_del(vrng->rate_limit_timer); timer_free(vrng->rate_limit_timer); virtio_del_queue(vdev, 0); virtio_cleanup(vdev); diff --git a/hw/watchdog/wdt_diag288.c b/hw/watchdog/wdt_diag288.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_diag288.c +++ b/hw/watchdog/wdt_diag288.c @@ -XXX,XX +XXX,XX @@ static void wdt_diag288_unrealize(DeviceState *dev) { DIAG288State *diag288 = DIAG288(dev); - timer_del(diag288->timer); timer_free(diag288->timer); } diff --git a/hw/watchdog/wdt_i6300esb.c b/hw/watchdog/wdt_i6300esb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_i6300esb.c +++ b/hw/watchdog/wdt_i6300esb.c @@ -XXX,XX +XXX,XX @@ static void i6300esb_exit(PCIDevice *dev) { I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev); - timer_del(d->timer); timer_free(d->timer); } diff --git a/migration/colo.c b/migration/colo.c index XXXXXXX..XXXXXXX 100644 --- a/migration/colo.c +++ b/migration/colo.c @@ -XXX,XX +XXX,XX @@ out: * error. */ colo_compare_unregister_notifier(&packets_compare_notifier); - timer_del(s->colo_delay_timer); timer_free(s->colo_delay_timer); qemu_event_destroy(&s->colo_checkpoint_event); diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/hmp-cmds.c +++ b/monitor/hmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void hmp_migrate_status_cb(void *opaque) error_report("%s", info->error_desc); } monitor_resume(status->mon); - timer_del(status->timer); timer_free(status->timer); g_free(status); } diff --git a/net/announce.c b/net/announce.c index XXXXXXX..XXXXXXX 100644 --- a/net/announce.c +++ b/net/announce.c @@ -XXX,XX +XXX,XX @@ void qemu_announce_timer_del(AnnounceTimer *timer, bool free_named) { bool free_timer = false; if (timer->tm) { - timer_del(timer->tm); timer_free(timer->tm); timer->tm = NULL; } diff --git a/net/colo-compare.c b/net/colo-compare.c index XXXXXXX..XXXXXXX 100644 --- a/net/colo-compare.c +++ b/net/colo-compare.c @@ -XXX,XX +XXX,XX @@ static void colo_compare_timer_init(CompareState *s) static void colo_compare_timer_del(CompareState *s) { if (s->packet_check_timer) { - timer_del(s->packet_check_timer); timer_free(s->packet_check_timer); s->packet_check_timer = NULL; } diff --git a/net/slirp.c b/net/slirp.c index XXXXXXX..XXXXXXX 100644 --- a/net/slirp.c +++ b/net/slirp.c @@ -XXX,XX +XXX,XX @@ static void *net_slirp_timer_new(SlirpTimerCb cb, static void net_slirp_timer_free(void *timer, void *opaque) { - timer_del(timer); timer_free(timer); } diff --git a/replay/replay-debugging.c b/replay/replay-debugging.c index XXXXXXX..XXXXXXX 100644 --- a/replay/replay-debugging.c +++ b/replay/replay-debugging.c @@ -XXX,XX +XXX,XX @@ static void replay_delete_break(void) assert(replay_mutex_locked()); if (replay_break_timer) { - timer_del(replay_break_timer); timer_free(replay_break_timer); replay_break_timer = NULL; } diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_finalize(Object *obj) #if !defined(CONFIG_USER_ONLY) S390CPU *cpu = S390_CPU(obj); - timer_del(cpu->env.tod_timer); timer_free(cpu->env.tod_timer); - timer_del(cpu->env.cpu_timer); timer_free(cpu->env.cpu_timer); qemu_unregister_reset(s390_cpu_machine_reset_cb, cpu); diff --git a/ui/console.c b/ui/console.c index XXXXXXX..XXXXXXX 100644 --- a/ui/console.c +++ b/ui/console.c @@ -XXX,XX +XXX,XX @@ static void gui_setup_refresh(DisplayState *ds) timer_mod(ds->gui_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME)); } if (!need_timer && ds->gui_timer != NULL) { - timer_del(ds->gui_timer); timer_free(ds->gui_timer); ds->gui_timer = NULL; } diff --git a/ui/spice-core.c b/ui/spice-core.c index XXXXXXX..XXXXXXX 100644 --- a/ui/spice-core.c +++ b/ui/spice-core.c @@ -XXX,XX +XXX,XX @@ static void timer_cancel(SpiceTimer *timer) static void timer_remove(SpiceTimer *timer) { - timer_del(timer->timer); timer_free(timer->timer); g_free(timer); } diff --git a/util/throttle.c b/util/throttle.c index XXXXXXX..XXXXXXX 100644 --- a/util/throttle.c +++ b/util/throttle.c @@ -XXX,XX +XXX,XX @@ static void throttle_timer_destroy(QEMUTimer **timer) { assert(*timer != NULL); - timer_del(*timer); timer_free(*timer); *timer = NULL; } -- 2.20.1 The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(), timer_free() to free the timer. The timer_deinit() step in this was always unnecessary, and now the timer_del() is implied by timer_free(), so we can collapse this down to simply calling timer_free(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-5-peter.maydell@linaro.org --- target/arm/cpu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { - timer_del(cpu->pmu_timer); - timer_deinit(cpu->pmu_timer); timer_free(cpu->pmu_timer); } #endif -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the digic_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 3 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/digic-timer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static void digic_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void digic_timer_finalize(Object *obj) +{ + DigicTimerState *s = DIGIC_TIMER(obj); + + ptimer_free(s->ptimer); +} + static void digic_timer_class_init(ObjectClass *klass, void *class_data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo digic_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(DigicTimerState), .instance_init = digic_timer_init, + .instance_finalize = digic_timer_finalize, .class_init = digic_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the a10_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 6 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49 #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/allwinner-a10-pit.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/allwinner-a10-pit.c +++ b/hw/timer/allwinner-a10-pit.c @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) } } +static void a10_pit_finalize(Object *obj) +{ + AwA10PITState *s = AW_A10_PIT(obj); + int i; + + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) { + ptimer_free(s->timer[i]); + } +} + static void a10_pit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo a10_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AwA10PITState), .instance_init = a10_pit_init, + .instance_finalize = a10_pit_finalize, .class_init = a10_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_rtc_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf57b3934 in exynos4210_rtc_init /qemu/hw/rtc/exynos4210_rtc.c:567 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/rtc/exynos4210_rtc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/rtc/exynos4210_rtc.c b/hw/rtc/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/exynos4210_rtc.c +++ b/hw/rtc/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_rtc_finalize(Object *obj) +{ + Exynos4210RTCState *s = EXYNOS4210_RTC(obj); + + ptimer_free(s->ptimer); + ptimer_free(s->ptimer_1Hz); +} + static void exynos4210_rtc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_rtc_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210RTCState), .instance_init = exynos4210_rtc_init, + .instance_finalize = exynos4210_rtc_finalize, .class_init = exynos4210_rtc_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_pwm_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 240 byte(s) in 5 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_pwm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_pwm_finalize(Object *obj) +{ + Exynos4210PWMState *s = EXYNOS4210_PWM(obj); + int i; + + for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static void exynos4210_pwm_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_pwm_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210PWMState), .instance_init = exynos4210_pwm_init, + .instance_finalize = exynos4210_pwm_finalize, .class_init = exynos4210_pwm_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mss_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 2 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/mss-timer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/mss-timer.c +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ static void mss_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); } +static void mss_timer_finalize(Object *obj) +{ + MSSTimerState *t = MSS_TIMER(obj); + int i; + + for (i = 0; i < NUM_TIMERS; i++) { + struct Msf2Timer *st = &t->timers[i]; + + ptimer_free(st->ptimer); + } +} + static const VMStateDescription vmstate_timers = { .name = "mss-timer-block", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mss_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(MSSTimerState), .instance_init = mss_timer_init, + .instance_finalize = mss_timer_finalize, .class_init = mss_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mv88w8618_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 4 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf5bb2290 in mv88w8618_timer_init /qemu/hw/arm/musicpal.c:862 #7 0xaaabf5bb2290 in mv88w8618_pit_init /qemu/hw/arm/musicpal.c:954 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf5a95540 in qdev_device_help /qemu/softmmu/qdev-monitor.c:283 #12 0xaaabf5a96940 in qmp_device_add /qemu/softmmu/qdev-monitor.c:801 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void mv88w8618_pit_finalize(Object *obj) +{ + SysBusDevice *dev = SYS_BUS_DEVICE(obj); + mv88w8618_pit_state *s = MV88W8618_PIT(dev); + int i; + + for (i = 0; i < 4; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static const VMStateDescription mv88w8618_timer_vmsd = { .name = "timer", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mv88w8618_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(mv88w8618_pit_state), .instance_init = mv88w8618_pit_init, + .instance_finalize = mv88w8618_pit_finalize, .class_init = mv88w8618_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_mct_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf56b01a0 in exynos4210_mct_init /qemu/hw/timer/exynos4210_mct.c:1505 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_mct_finalize(Object *obj) +{ + int i; + Exynos4210MCTState *s = EXYNOS4210_MCT(obj); + + ptimer_free(s->g_timer.ptimer_frc); + + for (i = 0; i < 2; i++) { + ptimer_free(s->l_timer[i].tick_timer.ptimer_tick); + ptimer_free(s->l_timer[i].ptimer_frc); + } +} + static void exynos4210_mct_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_mct_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210MCTState), .instance_init = exynos4210_mct_init, + .instance_finalize = exynos4210_mct_finalize, .class_init = exynos4210_mct_class_init, }; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> U-Boot expects PMU_MISC0 register bit 7 is set (see init_bandgap() in arch/arm/mach-imx/mx6/soc.c) during boot. This bit indicates the bandgap has stabilized. With this change, the latest upstream U-Boot (v2021.01-rc3) for imx6 sabrelite board (mx6qsabrelite_defconfig), with a slight change made by switching CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, boots to U-Boot shell on QEMU with the following command: $ qemu-system-arm -M sabrelite -smp 4 -m 1G -kernel u-boot \ -display none -serial null -serial stdio Boot log below: U-Boot 2021.01-rc3 (Dec 12 2020 - 17:40:02 +0800) CPU: Freescale i.MX?? rev1.0 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB force_idle_bus: sda=0 scl=0 sda.gp=0x5c scl.gp=0x55 force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0x6d scl.gp=0x6c force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0xcb scl.gp=0x5 force_idle_bus: failed to clear bus, sda=0 scl=0 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - No block device, using default environment In: serial Out: serial Err: serial Net: Board Net Initialization Failed No ethernet found. starting USB... Bus usb@2184000: usb dr_mode not found USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 0 => Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[PMU_REG_3P0] = 0x00000F74; s->analog[PMU_REG_2P5] = 0x00005071; s->analog[PMU_REG_CORE] = 0x00402010; - s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC0] = 0x04000080; s->analog[PMU_MISC1] = 0x00000000; s->analog[PMU_MISC2] = 0x00272727; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> Currently when U-Boot boots, it prints "??" for i.MX processor: CPU: Freescale i.MX?? rev1.0 at 792 MHz The register that was used to determine the silicon type is undocumented in the latest IMX6DQRM (Rev. 6, 05/2020), but we can refer to get_cpu_rev() in arch/arm/mach-imx/mx6/soc.c in the U-Boot source codes that USB_ANALOG_DIGPROG is used. Update its reset value to indicate i.MX6Q. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-3-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x00000004; s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; - s->analog[USB_ANALOG_DIGPROG] = 0x00000000; + s->analog[USB_ANALOG_DIGPROG] = 0x00630000; /* all PLLs need to be locked */ s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> At present, when booting U-Boot on QEMU sabrelite, we see: Net: Board Net Initialization Failed No ethernet found. U-Boot scans PHY at address 4/5/6/7 (see board_eth_init() in the U-Boot source: board/boundary/nitrogen6x/nitrogen6x.c). On the real board, the Ethernet PHY is at address 6. Adjust this by updating the "fec-phy-num" property of the fsl_imx6 SoC object. With this change, U-Boot sees the PHY but complains MAC address: Net: using phy at 6 FEC [PRIME] Error: FEC address not set. This is due to U-Boot tries to read the MAC address from the fuse, which QEMU does not have any valid content filled in. However this does not prevent the Ethernet from working in QEMU. We just need to set up the MAC address later in the U-Boot command shell, by: => setenv ethaddr 00:11:22:33:44:55 Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-4-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sabrelite.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/sabrelite.c b/hw/arm/sabrelite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sabrelite.c +++ b/hw/arm/sabrelite.c @@ -XXX,XX +XXX,XX @@ static void sabrelite_init(MachineState *machine) s = FSL_IMX6(object_new(TYPE_FSL_IMX6)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + + /* Ethernet PHY address is 6 */ + object_property_set_int(OBJECT(s), "fec-phy-num", 6, &error_fatal); + qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR, -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> This adds the target guide for SABRE Lite board, and documents how to boot a Linux kernel and U-Boot bootloader. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-5-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 120 insertions(+) create mode 100644 docs/system/arm/sabrelite.rst diff --git a/docs/system/arm/sabrelite.rst b/docs/system/arm/sabrelite.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/sabrelite.rst @@ -XXX,XX +XXX,XX @@ +Boundary Devices SABRE Lite (``sabrelite``) +=========================================== + +Boundary Devices SABRE Lite i.MX6 Development Board is a low-cost development +platform featuring the powerful Freescale / NXP Semiconductor's i.MX 6 Quad +Applications Processor. + +Supported devices +----------------- + +The SABRE Lite machine supports the following devices: + + * Up to 4 Cortex A9 cores + * Generic Interrupt Controller + * 1 Clock Controller Module + * 1 System Reset Controller + * 5 UARTs + * 2 EPIC timers + * 1 GPT timer + * 2 Watchdog timers + * 1 FEC Ethernet controller + * 3 I2C controllers + * 7 GPIO controllers + * 4 SDHC storage controllers + * 4 USB 2.0 host controllers + * 5 ECSPI controllers + * 1 SST 25VF016B flash + +Please note above list is a complete superset the QEMU SABRE Lite machine can +support. For a normal use case, a device tree blob that represents a real world +SABRE Lite board, only exposes a subset of devices to the guest software. + +Boot options +------------ + +The SABRE Lite machine can start using the standard -kernel functionality +for loading a Linux kernel, U-Boot bootloader or ELF executable. + +Running Linux kernel +-------------------- + +Linux mainline v5.10 release is tested at the time of writing. To build a Linux +mainline kernel that can be booted by the SABRE Lite machine, simply configure +the kernel using the imx_v6_v7_defconfig configuration: + +.. code-block:: bash + + $ export ARCH=arm + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make imx_v6_v7_defconfig + $ make + +To boot the newly built Linux kernel in QEMU with the SABRE Lite machine, use: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/imx6q-sabrelite.dtb \ + -initrd /path/to/rootfs.ext4 \ + -append "root=/dev/ram" + +Running U-Boot +-------------- + +U-Boot mainline v2020.10 release is tested at the time of writing. To build a +U-Boot mainline bootloader that can be booted by the SABRE Lite machine, use +the mx6qsabrelite_defconfig with similar commands as described above for Linux: + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make mx6qsabrelite_defconfig + +Note we need to adjust settings by: + +.. code-block:: bash + + $ make menuconfig + +then manually select the following configuration in U-Boot: + + Device Tree Control > Provider of DTB for DT Control > Embedded DTB + +To start U-Boot using the SABRE Lite machine, provide the u-boot binary to +the -kernel argument, along with an SD card image with rootfs: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel u-boot + +The following example shows booting Linux kernel from dhcp, and uses the +rootfs on an SD card. This requires some additional command line parameters +for QEMU: + +.. code-block:: none + + -nic user,tftp=/path/to/kernel/zImage \ + -drive file=sdcard.img,id=rootfs -device sd-card,drive=rootfs + +The directory for the built-in TFTP server should also contain the device tree +blob of the SABRE Lite board. The sample SD card image was populated with the +root file system with one single partition. You may adjust the kernel "root=" +boot parameter accordingly. + +After U-Boot boots, type the following commands in the U-Boot command shell to +boot the Linux kernel: + +.. code-block:: none + + => setenv ethaddr 00:11:22:33:44:55 + => setenv bootfile zImage + => dhcp + => tftpboot 14000000 imx6q-sabrelite.dtb + => setenv bootargs root=/dev/mmcblk3p1 + => bootz 12000000 - 14000000 diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/versatile arm/vexpress arm/aspeed + arm/sabrelite arm/digic arm/musicpal arm/gumstix -- 2.20.1 Hi; here's a queue of arm patches (plus a few elf2dmp changes); mostly these are minor cleanups and bugfixes. thanks -- PMM The following changes since commit deaca3fd30d3a8829160f8d3705d65ad83176800: Merge tag 'pull-vfio-20231018' of https://github.com/legoater/qemu into staging (2023-10-18 06:21:15 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20231019 for you to fetch changes up to 2a052b4ee01b3c413cef2ef49cb780cde17d4ba1: contrib/elf2dmp: Use g_malloc(), g_new() and g_free() (2023-10-19 14:32:13 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder * hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot' * xlnx devices: remove deprecated device reset * xlnx-bbram: hw/nvram: Use dot in device type name * elf2dmp: fix coverity issues * elf2dmp: convert to g_malloc, g_new and g_free * target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0 * hw/arm: refactor virt PPI logic * arm/kvm: convert to kvm_set_one_reg, kvm_get_one_reg * target/arm: Permit T32 LDM with single register * smmuv3: Advertise SMMUv3.1-XNX * target/arm: Implement FEAT_HPMN0 * Remove some unnecessary include lines * target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL * hw/timer/npcm7xx_timer: Prevent timer from counting down past zero ---------------------------------------------------------------- Chris Rauer (1): hw/timer/npcm7xx_timer: Prevent timer from counting down past zero Cornelia Huck (2): arm/kvm: convert to kvm_set_one_reg arm/kvm: convert to kvm_get_one_reg Leif Lindholm (3): {include/}hw/arm: refactor virt PPI logic include/hw/arm: move BSA definitions to bsa.h hw/arm/sbsa-ref: use bsa.h for PPI definitions Michal Orzel (1): target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0 Peter Maydell (8): target/arm: Permit T32 LDM with single register hw/arm/smmuv3: Update ID register bit field definitions hw/arm/smmuv3: Sort ID register setting into field order hw/arm/smmuv3: Advertise SMMUv3.1-XNX feature target/arm: Implement FEAT_HPMN0 target/arm/kvm64.c: Remove unused include target/arm/common-semi-target.h: Remove unnecessary boot.h include target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL Philippe Mathieu-Daudé (1): hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot.h' Suraj Shirvankar (1): contrib/elf2dmp: Use g_malloc(), g_new() and g_free() Thomas Huth (1): hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder Tong Ho (4): xlnx-bbram: hw/nvram: Remove deprecated device reset xlnx-zynqmp-efuse: hw/nvram: Remove deprecated device reset xlnx-versal-efuse: hw/nvram: Remove deprecated device reset xlnx-bbram: hw/nvram: Use dot in device type name Viktor Prutyanov (2): elf2dmp: limit print length for sign_rsds elf2dmp: check array bounds in pdb_get_file_size MAINTAINERS | 2 +- docs/system/arm/emulation.rst | 1 + hw/arm/smmuv3-internal.h | 38 ++++++++ include/hw/arm/bsa.h | 35 +++++++ include/hw/arm/exynos4210.h | 2 +- include/hw/{misc => arm}/raspberrypi-fw-defs.h | 0 include/hw/arm/virt.h | 12 +-- include/hw/nvram/xlnx-bbram.h | 2 +- target/arm/common-semi-target.h | 4 +- target/arm/cpu-qom.h | 2 - target/arm/cpu.h | 22 +++++ contrib/elf2dmp/addrspace.c | 7 +- contrib/elf2dmp/main.c | 11 +-- contrib/elf2dmp/pdb.c | 32 ++++--- contrib/elf2dmp/qemu_elf.c | 7 +- hw/arm/boot.c | 95 +++++-------------- hw/arm/sbsa-ref.c | 21 ++--- hw/arm/smmuv3.c | 8 +- hw/arm/virt-acpi-build.c | 12 +-- hw/arm/virt.c | 24 +++-- hw/misc/bcm2835_property.c | 2 +- hw/nvram/xlnx-bbram.c | 8 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 8 +- hw/nvram/xlnx-zynqmp-efuse.c | 8 +- hw/timer/npcm7xx_timer.c | 3 + target/arm/arm-powerctl.c | 53 +---------- target/arm/cpu.c | 95 +++++++++++++++++++ target/arm/helper.c | 19 +--- target/arm/kvm.c | 28 ++---- target/arm/kvm64.c | 124 +++++++------------------ target/arm/tcg/cpu32.c | 4 + target/arm/tcg/cpu64.c | 1 + target/arm/tcg/translate.c | 37 +++++--- 33 files changed, 368 insertions(+), 359 deletions(-) create mode 100644 include/hw/arm/bsa.h rename include/hw/{misc => arm}/raspberrypi-fw-defs.h (100%) From: Thomas Huth <thuth@redhat.com> The file is obviously related to the raspberrypi machine, so it should reside in hw/arm/ instead of hw/misc/. And while we're at it, also adjust the wildcard in MAINTAINERS so that it covers this file, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231012073458.860187-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- include/hw/{misc => arm}/raspberrypi-fw-defs.h | 0 hw/misc/bcm2835_property.c | 2 +- 3 files changed, 2 insertions(+), 2 deletions(-) rename include/hw/{misc => arm}/raspberrypi-fw-defs.h (100%) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: hw/arm/raspi.c F: hw/arm/raspi_platform.h F: hw/*/bcm283* -F: include/hw/arm/raspi* +F: include/hw/arm/rasp* F: include/hw/*/bcm283* F: docs/system/arm/raspi.rst diff --git a/include/hw/misc/raspberrypi-fw-defs.h b/include/hw/arm/raspberrypi-fw-defs.h similarity index 100% rename from include/hw/misc/raspberrypi-fw-defs.h rename to include/hw/arm/raspberrypi-fw-defs.h diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ #include "migration/vmstate.h" #include "hw/irq.h" #include "hw/misc/bcm2835_mbox_defs.h" -#include "hw/misc/raspberrypi-fw-defs.h" +#include "hw/arm/raspberrypi-fw-defs.h" #include "sysemu/dma.h" #include "qemu/log.h" #include "qemu/module.h" -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> struct arm_boot_info is declared in "hw/arm/boot.h". By including the correct header we don't need to declare it again in "target/arm/cpu-qom.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20231013130214.95742-1-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/exynos4210.h | 2 +- target/arm/cpu-qom.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/exynos4210_gic.h" #include "hw/intc/exynos4210_combiner.h" #include "hw/core/split-irq.h" -#include "target/arm/cpu-qom.h" +#include "hw/arm/boot.h" #include "qom/object.h" #define EXYNOS4210_NCPUS 2 diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-qom.h +++ b/target/arm/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #include "hw/core/cpu.h" #include "qom/object.h" -struct arm_boot_info; - #define TYPE_ARM_CPU "arm-cpu" OBJECT_DECLARE_CPU_TYPE(ARMCPU, ARMCPUClass, ARM_CPU) -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231003052345.199725-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-bbram.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-bbram.c b/hw/nvram/xlnx-bbram.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-bbram.c +++ b/hw/nvram/xlnx-bbram.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the Xilinx BBRAM Battery Backed RAM * * Copyright (c) 2014-2021 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ static RegisterAccessInfo bbram_ctrl_regs_info[] = { } }; -static void bbram_ctrl_reset(DeviceState *dev) +static void bbram_ctrl_reset_hold(Object *obj) { - XlnxBBRam *s = XLNX_BBRAM(dev); + XlnxBBRam *s = XLNX_BBRAM(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property bbram_ctrl_props[] = { static void bbram_ctrl_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = bbram_ctrl_reset; + rc->phases.hold = bbram_ctrl_reset_hold; dc->realize = bbram_ctrl_realize; dc->vmsd = &vmstate_bbram_ctrl; device_class_set_props(dc, bbram_ctrl_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231004055713.324009-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-zynqmp-efuse.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-zynqmp-efuse.c b/hw/nvram/xlnx-zynqmp-efuse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-zynqmp-efuse.c +++ b/hw/nvram/xlnx-zynqmp-efuse.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the ZynqMP eFuse * * Copyright (c) 2015 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Written by Edgar E. Iglesias <edgari@xilinx.com> * @@ -XXX,XX +XXX,XX @@ static void zynqmp_efuse_register_reset(RegisterInfo *reg) register_reset(reg); } -static void zynqmp_efuse_reset(DeviceState *dev) +static void zynqmp_efuse_reset_hold(Object *obj) { - XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(dev); + XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property zynqmp_efuse_props[] = { static void zynqmp_efuse_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = zynqmp_efuse_reset; + rc->phases.hold = zynqmp_efuse_reset_hold; dc->realize = zynqmp_efuse_realize; dc->vmsd = &vmstate_efuse; device_class_set_props(dc, zynqmp_efuse_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231004055339.323833-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-versal-efuse-ctrl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-versal-efuse-ctrl.c b/hw/nvram/xlnx-versal-efuse-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-versal-efuse-ctrl.c +++ b/hw/nvram/xlnx-versal-efuse-ctrl.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the Versal eFuse controller * * Copyright (c) 2020 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ static void efuse_ctrl_register_reset(RegisterInfo *reg) register_reset(reg); } -static void efuse_ctrl_reset(DeviceState *dev) +static void efuse_ctrl_reset_hold(Object *obj) { - XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(dev); + XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property efuse_ctrl_props[] = { static void efuse_ctrl_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = efuse_ctrl_reset; + rc->phases.hold = efuse_ctrl_reset_hold; dc->realize = efuse_ctrl_realize; dc->vmsd = &vmstate_efuse_ctrl; device_class_set_props(dc, efuse_ctrl_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This replaces the comma (,) to dot (.) in the device type name so the name can be used with the 'driver=' command line option. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231003052139.199665-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/nvram/xlnx-bbram.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/hw/nvram/xlnx-bbram.h b/include/hw/nvram/xlnx-bbram.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/nvram/xlnx-bbram.h +++ b/include/hw/nvram/xlnx-bbram.h @@ -XXX,XX +XXX,XX @@ #define RMAX_XLNX_BBRAM ((0x4c / 4) + 1) -#define TYPE_XLNX_BBRAM "xlnx,bbram-ctrl" +#define TYPE_XLNX_BBRAM "xlnx.bbram-ctrl" OBJECT_DECLARE_SIMPLE_TYPE(XlnxBBRam, XLNX_BBRAM); struct XlnxBBRam { -- 2.34.1 From: Viktor Prutyanov <viktor@daynix.com> String sign_rsds isn't terminated, so the print length must be limited. Fixes: Coverity CID 1521598 Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20230930235317.11469-2-viktor@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/contrib/elf2dmp/main.c b/contrib/elf2dmp/main.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/main.c +++ b/contrib/elf2dmp/main.c @@ -XXX,XX +XXX,XX @@ static bool pe_check_pdb_name(uint64_t base, void *start_addr, } if (memcmp(&rsds->Signature, sign_rsds, sizeof(sign_rsds))) { - eprintf("CodeView signature is \'%.4s\', \'%s\' expected\n", + eprintf("CodeView signature is \'%.4s\', \'%.4s\' expected\n", rsds->Signature, sign_rsds); return false; } -- 2.34.1 From: Viktor Prutyanov <viktor@daynix.com> Index in file_size array must be checked against num_files, because the entries we are looking for may be absent in the PDB. Fixes: Coverity CID 1521597 Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230930235317.11469-3-viktor@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/pdb.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/contrib/elf2dmp/pdb.c b/contrib/elf2dmp/pdb.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/pdb.c +++ b/contrib/elf2dmp/pdb.c @@ -XXX,XX +XXX,XX @@ static uint32_t pdb_get_file_size(const struct pdb_reader *r, unsigned idx) { + if (idx >= r->ds.toc->num_files) { + return 0; + } + return r->ds.toc->file_size[idx]; } @@ -XXX,XX +XXX,XX @@ static void *pdb_ds_read_file(struct pdb_reader* r, uint32_t file_number) static int pdb_init_segments(struct pdb_reader *r) { - char *segs; unsigned stream_idx = r->segments; - segs = pdb_ds_read_file(r, stream_idx); - if (!segs) { + r->segs = pdb_ds_read_file(r, stream_idx); + if (!r->segs) { return 1; } - r->segs = segs; r->segs_size = pdb_get_file_size(r, stream_idx); + if (!r->segs_size) { + return 1; + } return 0; } -- 2.34.1 From: Michal Orzel <michal.orzel@amd.com> On an attempt to access CNTPCT_EL0 from EL0 using a guest running on top of Xen, a trap from EL2 was observed which is something not reproducible on HW (also, Xen does not trap accesses to physical counter). This is because gt_counter_access() checks for an incorrect bit (1 instead of 0) of CNTHCTL_EL2 if HCR_EL2.E2H is 0 and access is made to physical counter. Refer ARM ARM DDI 0487J.a, D19.12.2: When HCR_EL2.E2H is 0: - EL1PCTEN, bit [0]: refers to physical counter - EL1PCEN, bit [1]: refers to physical timer registers Drop entire block "if (hcr & HCR_E2H) {...} else {...}" from EL0 case and fall through to EL1 case, given that after fixing checking for the correct bit, the handling is the same. Fixes: 5bc8437136fb ("target/arm: Update timer access for VHE") Signed-off-by: Michal Orzel <michal.orzel@amd.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Message-id: 20230928094404.20802-1-michal.orzel@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, if (!extract32(env->cp15.c14_cntkctl, timeridx, 1)) { return CP_ACCESS_TRAP; } - - /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PCTEN. */ - if (hcr & HCR_E2H) { - if (timeridx == GTIMER_PHYS && - !extract32(env->cp15.cnthctl_el2, 10, 1)) { - return CP_ACCESS_TRAP_EL2; - } - } else { - /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */ - if (has_el2 && timeridx == GTIMER_PHYS && - !extract32(env->cp15.cnthctl_el2, 1, 1)) { - return CP_ACCESS_TRAP_EL2; - } - } - break; - + /* fall through */ case 1: /* Check CNTHCTL_EL2.EL1PCTEN, which changes location based on E2H. */ if (has_el2 && timeridx == GTIMER_PHYS && -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> GIC Private Peripheral Interrupts (PPI) are defined as GIC INTID 16-31. As in, PPI0 is INTID16 .. PPI15 is INTID31. Arm's Base System Architecture specification (BSA) lists the mandated and recommended private interrupt IDs by INTID, not by PPI index. But current definitions in virt define them by PPI index, complicating cross referencing. Meanwhile, the PPI(x) macro counterintuitively adds 16 to the input value, converting a PPI index to an INTID. Resolve this by redefining the BSA-allocated PPIs by their INTIDs, and replacing the PPI(x) macro with an INTID_TO_PPI(x) one where required. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-2-quic_llindhol@quicinc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 14 +++++++------- hw/arm/virt-acpi-build.c | 12 ++++++------ hw/arm/virt.c | 24 ++++++++++++++---------- 3 files changed, 27 insertions(+), 23 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ #define NUM_VIRTIO_TRANSPORTS 32 #define NUM_SMMU_IRQS 4 -#define ARCH_GIC_MAINT_IRQ 9 +#define ARCH_GIC_MAINT_IRQ 25 -#define ARCH_TIMER_VIRT_IRQ 11 -#define ARCH_TIMER_S_EL1_IRQ 13 -#define ARCH_TIMER_NS_EL1_IRQ 14 -#define ARCH_TIMER_NS_EL2_IRQ 10 +#define ARCH_TIMER_VIRT_IRQ 27 +#define ARCH_TIMER_S_EL1_IRQ 29 +#define ARCH_TIMER_NS_EL1_IRQ 30 +#define ARCH_TIMER_NS_EL2_IRQ 26 -#define VIRTUAL_PMU_IRQ 7 +#define VIRTUAL_PMU_IRQ 23 -#define PPI(irq) ((irq) + 16) +#define INTID_TO_PPI(irq) ((irq) - 16) /* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ #define PVTIME_SIZE_PER_CPU 64 diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * The interrupt values are the same with the device tree when adding 16 */ /* Secure EL1 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_S_EL1_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_S_EL1_IRQ, 4); /* Secure EL1 timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* Non-Secure EL1 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL1_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL1_IRQ, 4); /* Non-Secure EL1 timer Flags */ build_append_int_noprefix(table_data, irqflags | 1UL << 2, /* Always-on Capability */ 4); /* Virtual timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_VIRT_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_VIRT_IRQ, 4); /* Virtual Timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* Non-Secure EL2 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_IRQ, 4); /* Non-Secure EL2 timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* CntReadBase Physical address */ @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); uint64_t physical_base_address = 0, gich = 0, gicv = 0; - uint32_t vgic_interrupt = vms->virt ? PPI(ARCH_GIC_MAINT_IRQ) : 0; + uint32_t vgic_interrupt = vms->virt ? ARCH_GIC_MAINT_IRQ : 0; uint32_t pmu_interrupt = arm_feature(&armcpu->env, ARM_FEATURE_PMU) ? - PPI(VIRTUAL_PMU_IRQ) : 0; + VIRTUAL_PMU_IRQ : 0; if (vms->gic_version == VIRT_GIC_VERSION_2) { physical_base_address = memmap[VIRT_GIC_CPU].base; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_S_EL1_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL1_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_VIRT_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL2_IRQ, irqflags); + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); - int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int intidbase = NUM_IRQS + i * GIC_INTERNAL; /* Mapping from the output timer irq lines from the CPU to the * GIC PPI inputs we use for the virt board. */ @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(vms->gic, - ppibase + timer_irq[irq])); + intidbase + timer_irq[irq])); } if (vms->gic_version != VIRT_GIC_VERSION_2) { qemu_irq irq = qdev_get_gpio_in(vms->gic, - ppibase + ARCH_GIC_MAINT_IRQ); + intidbase + ARCH_GIC_MAINT_IRQ); qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, irq); } else if (vms->virt) { qemu_irq irq = qdev_get_gpio_in(vms->gic, - ppibase + ARCH_GIC_MAINT_IRQ); + intidbase + ARCH_GIC_MAINT_IRQ); sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, irq); } qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(vms->gic, ppibase + qdev_get_gpio_in(vms->gic, intidbase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); @@ -XXX,XX +XXX,XX @@ static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) if (pmu) { assert(arm_feature(&ARM_CPU(cpu)->env, ARM_FEATURE_PMU)); if (kvm_irqchip_in_kernel()) { - kvm_arm_pmu_set_irq(cpu, PPI(VIRTUAL_PMU_IRQ)); + kvm_arm_pmu_set_irq(cpu, VIRTUAL_PMU_IRQ); } kvm_arm_pmu_init(cpu); } -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> virt.h defines a number of IRQs that are ultimately described by Arm's Base System Architecture specification. Move these to a dedicated header so that they can be reused by other platforms that do the same. Include that header from virt.h to minimise churn. While we're moving the definitions, sort them into numerical order, and add the ARCH_TIMER_NS_EL2_VIRT_IRQ definition used by sbsa-ref and which will eventually be needed by virt also. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-3-quic_llindhol@quicinc.com [PMM: Remove unused PPI_TO_INTID macro; sort numerically; add ARCH_TIMER_NS_EL2_VIRT_IRQ] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bsa.h | 35 +++++++++++++++++++++++++++++++++++ include/hw/arm/virt.h | 12 +----------- 2 files changed, 36 insertions(+), 11 deletions(-) create mode 100644 include/hw/arm/bsa.h diff --git a/include/hw/arm/bsa.h b/include/hw/arm/bsa.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/bsa.h @@ -XXX,XX +XXX,XX @@ +/* + * Common definitions for Arm Base System Architecture (BSA) platforms. + * + * Copyright (c) 2015 Linaro Limited + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef QEMU_ARM_BSA_H +#define QEMU_ARM_BSA_H + +/* These are architectural INTID values */ +#define VIRTUAL_PMU_IRQ 23 +#define ARCH_GIC_MAINT_IRQ 25 +#define ARCH_TIMER_NS_EL2_IRQ 26 +#define ARCH_TIMER_VIRT_IRQ 27 +#define ARCH_TIMER_NS_EL2_VIRT_IRQ 28 +#define ARCH_TIMER_S_EL1_IRQ 29 +#define ARCH_TIMER_NS_EL1_IRQ 30 + +#define INTID_TO_PPI(irq) ((irq) - 16) + +#endif /* QEMU_ARM_BSA_H */ diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ #include "qemu/notify.h" #include "hw/boards.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" #include "hw/block/flash.h" #include "sysemu/kvm.h" #include "hw/intc/arm_gicv3_common.h" @@ -XXX,XX +XXX,XX @@ #define NUM_VIRTIO_TRANSPORTS 32 #define NUM_SMMU_IRQS 4 -#define ARCH_GIC_MAINT_IRQ 25 - -#define ARCH_TIMER_VIRT_IRQ 27 -#define ARCH_TIMER_S_EL1_IRQ 29 -#define ARCH_TIMER_NS_EL1_IRQ 30 -#define ARCH_TIMER_NS_EL2_IRQ 26 - -#define VIRTUAL_PMU_IRQ 23 - -#define INTID_TO_PPI(irq) ((irq) - 16) - /* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ #define PVTIME_SIZE_PER_CPU 64 -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> Use the private peripheral interrupt definitions from bsa.h instead of defining them locally. Refactor to use the INTIDs defined there instead of the PPI# used previously. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-4-quic_llindhol@quicinc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ * ARM SBSA Reference Platform emulation * * Copyright (c) 2018 Linaro Limited + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. * Written by Hongbo Zhang <hongbo.zhang@linaro.org> * * This program is free software; you can redistribute it and/or modify it @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "kvm_arm.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" #include "hw/arm/fdt.h" #include "hw/arm/smmuv3.h" #include "hw/block/flash.h" @@ -XXX,XX +XXX,XX @@ #define NUM_SMMU_IRQS 4 #define NUM_SATA_PORTS 6 -#define VIRTUAL_PMU_IRQ 7 -#define ARCH_GIC_MAINT_IRQ 9 -#define ARCH_TIMER_VIRT_IRQ 11 -#define ARCH_TIMER_S_EL1_IRQ 13 -#define ARCH_TIMER_NS_EL1_IRQ 14 -#define ARCH_TIMER_NS_EL2_IRQ 10 -#define ARCH_TIMER_NS_EL2_VIRT_IRQ 12 - enum { SBSA_FLASH, SBSA_MEM, @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); - int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int intidbase = NUM_IRQS + i * GIC_INTERNAL; int irq; /* * Mapping from the output timer irq lines from the CPU to the @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(sms->gic, - ppibase + timer_irq[irq])); + intidbase + timer_irq[irq])); } qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase + qdev_get_gpio_in(sms->gic, + intidbase + ARCH_GIC_MAINT_IRQ)); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase + qdev_get_gpio_in(sms->gic, + intidbase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> We can neaten the code by switching to the kvm_set_one_reg function. Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231010142453.224369-2-cohuck@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 13 +++------ target/arm/kvm64.c | 66 +++++++++++++--------------------------------- 2 files changed, 21 insertions(+), 58 deletions(-) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) bool ok = true; for (i = 0; i < cpu->cpreg_array_len; i++) { - struct kvm_one_reg r; uint64_t regidx = cpu->cpreg_indexes[i]; uint32_t v32; int ret; @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) continue; } - r.id = regidx; switch (regidx & KVM_REG_SIZE_MASK) { case KVM_REG_SIZE_U32: v32 = cpu->cpreg_values[i]; - r.addr = (uintptr_t)&v32; + ret = kvm_set_one_reg(cs, regidx, &v32); break; case KVM_REG_SIZE_U64: - r.addr = (uintptr_t)(cpu->cpreg_values + i); + ret = kvm_set_one_reg(cs, regidx, cpu->cpreg_values + i); break; default: g_assert_not_reached(); } - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r); if (ret) { /* We might fail for "unknown register" and also for * "you tried to set a register which is constant with @@ -XXX,XX +XXX,XX @@ void kvm_arm_get_virtual_time(CPUState *cs) void kvm_arm_put_virtual_time(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); - struct kvm_one_reg reg = { - .id = KVM_REG_ARM_TIMER_CNT, - .addr = (uintptr_t)&cpu->kvm_vtime, - }; int ret; if (!cpu->kvm_vtime_dirty) { return; } - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM_TIMER_CNT, &cpu->kvm_vtime); if (ret) { error_report("Failed to set KVM_REG_ARM_TIMER_CNT"); abort(); diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ static int kvm_arm_sve_set_vls(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); uint64_t vls[KVM_ARM64_SVE_VLS_WORDS] = { cpu->sve_vq.map }; - struct kvm_one_reg reg = { - .id = KVM_REG_ARM64_SVE_VLS, - .addr = (uint64_t)&vls[0], - }; assert(cpu->sve_max_vq <= KVM_ARM64_SVE_VQ_MAX); - return kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + return kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_VLS, &vls[0]); } #define ARM_CPU_ID_MPIDR 3, 0, 0, 0, 5 @@ -XXX,XX +XXX,XX @@ static void kvm_inject_arm_sea(CPUState *c) static int kvm_arch_put_fpsimd(CPUState *cs) { CPUARMState *env = &ARM_CPU(cs)->env; - struct kvm_one_reg reg; int i, ret; for (i = 0; i < 32; i++) { uint64_t *q = aa64_vfp_qreg(env, i); #if HOST_BIG_ENDIAN uint64_t fp_val[2] = { q[1], q[0] }; - reg.addr = (uintptr_t)fp_val; + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), + fp_val); #else - reg.addr = (uintptr_t)q; + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), q); #endif - reg.id = AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) CPUARMState *env = &cpu->env; uint64_t tmp[ARM_MAX_VQ * 2]; uint64_t *r; - struct kvm_one_reg reg; int n, ret; for (n = 0; n < KVM_ARM64_SVE_NUM_ZREGS; ++n) { r = sve_bswap64(tmp, &env->vfp.zregs[n].d[0], cpu->sve_max_vq * 2); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_ZREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_ZREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) for (n = 0; n < KVM_ARM64_SVE_NUM_PREGS; ++n) { r = sve_bswap64(tmp, r = &env->vfp.pregs[n].p[0], DIV_ROUND_UP(cpu->sve_max_vq * 2, 8)); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_PREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_PREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) r = sve_bswap64(tmp, &env->vfp.pregs[FFR_PRED_NUM].p[0], DIV_ROUND_UP(cpu->sve_max_vq * 2, 8)); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_FFR(0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_FFR(0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) int kvm_arch_put_registers(CPUState *cs, int level) { - struct kvm_one_reg reg; uint64_t val; uint32_t fpr; int i, ret; @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) } for (i = 0; i < 31; i++) { - reg.id = AARCH64_CORE_REG(regs.regs[i]); - reg.addr = (uintptr_t) &env->xregs[i]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.regs[i]), + &env->xregs[i]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) */ aarch64_save_sp(env, 1); - reg.id = AARCH64_CORE_REG(regs.sp); - reg.addr = (uintptr_t) &env->sp_el[0]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.sp), &env->sp_el[0]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(sp_el1); - reg.addr = (uintptr_t) &env->sp_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(sp_el1), &env->sp_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) } else { val = cpsr_read(env); } - reg.id = AARCH64_CORE_REG(regs.pstate); - reg.addr = (uintptr_t) &val; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.pstate), &val); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(regs.pc); - reg.addr = (uintptr_t) &env->pc; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.pc), &env->pc); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(elr_el1); - reg.addr = (uintptr_t) &env->elr_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(elr_el1), &env->elr_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) /* KVM 0-4 map to QEMU banks 1-5 */ for (i = 0; i < KVM_NR_SPSR; i++) { - reg.id = AARCH64_CORE_REG(spsr[i]); - reg.addr = (uintptr_t) &env->banked_spsr[i + 1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(spsr[i]), + &env->banked_spsr[i + 1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) return ret; } - reg.addr = (uintptr_t)(&fpr); fpr = vfp_get_fpsr(env); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpsr); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpsr), &fpr); if (ret) { return ret; } - reg.addr = (uintptr_t)(&fpr); fpr = vfp_get_fpcr(env); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpcr); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpcr), &fpr); if (ret) { return ret; } -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> We can neaten the code by switching the callers that work on a CPUstate to the kvm_get_one_reg function. Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231010142453.224369-3-cohuck@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 15 +++--------- target/arm/kvm64.c | 57 ++++++++++++---------------------------------- 2 files changed, 18 insertions(+), 54 deletions(-) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ bool write_kvmstate_to_list(ARMCPU *cpu) bool ok = true; for (i = 0; i < cpu->cpreg_array_len; i++) { - struct kvm_one_reg r; uint64_t regidx = cpu->cpreg_indexes[i]; uint32_t v32; int ret; - r.id = regidx; - switch (regidx & KVM_REG_SIZE_MASK) { case KVM_REG_SIZE_U32: - r.addr = (uintptr_t)&v32; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); + ret = kvm_get_one_reg(cs, regidx, &v32); if (!ret) { cpu->cpreg_values[i] = v32; } break; case KVM_REG_SIZE_U64: - r.addr = (uintptr_t)(cpu->cpreg_values + i); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); + ret = kvm_get_one_reg(cs, regidx, cpu->cpreg_values + i); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu) void kvm_arm_get_virtual_time(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); - struct kvm_one_reg reg = { - .id = KVM_REG_ARM_TIMER_CNT, - .addr = (uintptr_t)&cpu->kvm_vtime, - }; int ret; if (cpu->kvm_vtime_dirty) { return; } - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM_TIMER_CNT, &cpu->kvm_vtime); if (ret) { error_report("Failed to get KVM_REG_ARM_TIMER_CNT"); abort(); diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) static int kvm_arch_get_fpsimd(CPUState *cs) { CPUARMState *env = &ARM_CPU(cs)->env; - struct kvm_one_reg reg; int i, ret; for (i = 0; i < 32; i++) { uint64_t *q = aa64_vfp_qreg(env, i); - reg.id = AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]); - reg.addr = (uintptr_t)q; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), q); if (ret) { return ret; } else { @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; - struct kvm_one_reg reg; uint64_t *r; int n, ret; for (n = 0; n < KVM_ARM64_SVE_NUM_ZREGS; ++n) { r = &env->vfp.zregs[n].d[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_ZREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_ZREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) for (n = 0; n < KVM_ARM64_SVE_NUM_PREGS; ++n) { r = &env->vfp.pregs[n].p[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_PREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_PREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) } r = &env->vfp.pregs[FFR_PRED_NUM].p[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_FFR(0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_FFR(0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) int kvm_arch_get_registers(CPUState *cs) { - struct kvm_one_reg reg; uint64_t val; unsigned int el; uint32_t fpr; @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) CPUARMState *env = &cpu->env; for (i = 0; i < 31; i++) { - reg.id = AARCH64_CORE_REG(regs.regs[i]); - reg.addr = (uintptr_t) &env->xregs[i]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.regs[i]), + &env->xregs[i]); if (ret) { return ret; } } - reg.id = AARCH64_CORE_REG(regs.sp); - reg.addr = (uintptr_t) &env->sp_el[0]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.sp), &env->sp_el[0]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(sp_el1); - reg.addr = (uintptr_t) &env->sp_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(sp_el1), &env->sp_el[1]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(regs.pstate); - reg.addr = (uintptr_t) &val; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.pstate), &val); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) */ aarch64_restore_sp(env, 1); - reg.id = AARCH64_CORE_REG(regs.pc); - reg.addr = (uintptr_t) &env->pc; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.pc), &env->pc); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) aarch64_sync_64_to_32(env); } - reg.id = AARCH64_CORE_REG(elr_el1); - reg.addr = (uintptr_t) &env->elr_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(elr_el1), &env->elr_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) * KVM SPSRs 0-4 map to QEMU banks 1-5 */ for (i = 0; i < KVM_NR_SPSR; i++) { - reg.id = AARCH64_CORE_REG(spsr[i]); - reg.addr = (uintptr_t) &env->banked_spsr[i + 1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(spsr[i]), + &env->banked_spsr[i + 1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) return ret; } - reg.addr = (uintptr_t)(&fpr); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpsr); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpsr), &fpr); if (ret) { return ret; } vfp_set_fpsr(env, fpr); - reg.addr = (uintptr_t)(&fpr); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpcr); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpcr), &fpr); if (ret) { return ret; } -- 2.34.1 For the Thumb T32 encoding of LDM, if only a single register is specified in the register list this instruction is UNPREDICTABLE, with the following choices: * instruction UNDEFs * instruction is a NOP * instruction loads a single register * instruction loads an unspecified set of registers Currently we choose to UNDEF (a behaviour chosen in commit 4b222545dbf30 in 2019; previously we treated it as "load the specified single register"). Unfortunately there is real world code out there (which shipped in at least Android 11, 12 and 13) which incorrectly uses this UNPREDICTABLE insn on the assumption that it does a single register load, which is (presumably) what it happens to do on real hardware, and is also what it does on the equivalent A32 encoding. Revert to the pre-4b222545dbf30 behaviour of not UNDEFing for this T32 encoding. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1799 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230927101853.39288-1-peter.maydell@linaro.org --- target/arm/tcg/translate.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void op_addr_block_post(DisasContext *s, arg_ldst_block *a, } } -static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) +static bool op_stm(DisasContext *s, arg_ldst_block *a) { int i, j, n, list, mem_idx; bool user = a->u; @@ -XXX,XX +XXX,XX @@ static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) list = a->list; n = ctpop16(list); - if (n < min_n || a->rn == 15) { + /* + * This is UNPREDICTABLE for n < 1 in all encodings, and we choose + * to UNDEF. In the T32 STM encoding n == 1 is also UNPREDICTABLE, + * but hardware treats it like the A32 version and implements the + * single-register-store, and some in-the-wild (buggy) software + * assumes that, so we don't UNDEF on that case. + */ + if (n < 1 || a->rn == 15) { unallocated_encoding(s); return true; } @@ -XXX,XX +XXX,XX @@ static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) static bool trans_STM(DisasContext *s, arg_ldst_block *a) { - /* BitCount(list) < 1 is UNPREDICTABLE */ - return op_stm(s, a, 1); + return op_stm(s, a); } static bool trans_STM_t32(DisasContext *s, arg_ldst_block *a) @@ -XXX,XX +XXX,XX @@ static bool trans_STM_t32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 2 is UNPREDICTABLE */ - return op_stm(s, a, 2); + return op_stm(s, a); } -static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) +static bool do_ldm(DisasContext *s, arg_ldst_block *a) { int i, j, n, list, mem_idx; bool loaded_base; @@ -XXX,XX +XXX,XX @@ static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) list = a->list; n = ctpop16(list); - if (n < min_n || a->rn == 15) { + /* + * This is UNPREDICTABLE for n < 1 in all encodings, and we choose + * to UNDEF. In the T32 LDM encoding n == 1 is also UNPREDICTABLE, + * but hardware treats it like the A32 version and implements the + * single-register-load, and some in-the-wild (buggy) software + * assumes that, so we don't UNDEF on that case. + */ + if (n < 1 || a->rn == 15) { unallocated_encoding(s); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDM_a32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 1 is UNPREDICTABLE */ - return do_ldm(s, a, 1); + return do_ldm(s, a); } static bool trans_LDM_t32(DisasContext *s, arg_ldst_block *a) @@ -XXX,XX +XXX,XX @@ static bool trans_LDM_t32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 2 is UNPREDICTABLE */ - return do_ldm(s, a, 2); + return do_ldm(s, a); } static bool trans_LDM_t16(DisasContext *s, arg_ldst_block *a) { /* Writeback is conditional on the base register not being loaded. */ a->w = !(a->list & (1 << a->rn)); - /* BitCount(list) < 1 is UNPREDICTABLE */ - return do_ldm(s, a, 1); + return do_ldm(s, a); } static bool trans_CLRM(DisasContext *s, arg_CLRM *a) -- 2.34.1 Update the SMMUv3 ID register bit field definitions to the set in the most recent specification (IHI0700 F.a). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-2-peter.maydell@linaro.org --- hw/arm/smmuv3-internal.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(IDR0, 0x0) FIELD(IDR0, S1P, 1 , 1) FIELD(IDR0, TTF, 2 , 2) FIELD(IDR0, COHACC, 4 , 1) + FIELD(IDR0, BTM, 5 , 1) + FIELD(IDR0, HTTU, 6 , 2) + FIELD(IDR0, DORMHINT, 8 , 1) + FIELD(IDR0, HYP, 9 , 1) + FIELD(IDR0, ATS, 10, 1) + FIELD(IDR0, NS1ATS, 11, 1) FIELD(IDR0, ASID16, 12, 1) + FIELD(IDR0, MSI, 13, 1) + FIELD(IDR0, SEV, 14, 1) + FIELD(IDR0, ATOS, 15, 1) + FIELD(IDR0, PRI, 16, 1) + FIELD(IDR0, VMW, 17, 1) FIELD(IDR0, VMID16, 18, 1) + FIELD(IDR0, CD2L, 19, 1) + FIELD(IDR0, VATOS, 20, 1) FIELD(IDR0, TTENDIAN, 21, 2) + FIELD(IDR0, ATSRECERR, 23, 1) FIELD(IDR0, STALL_MODEL, 24, 2) FIELD(IDR0, TERM_MODEL, 26, 1) FIELD(IDR0, STLEVEL, 27, 2) + FIELD(IDR0, RME_IMPL, 30, 1) REG32(IDR1, 0x4) FIELD(IDR1, SIDSIZE, 0 , 6) + FIELD(IDR1, SSIDSIZE, 6 , 5) + FIELD(IDR1, PRIQS, 11, 5) FIELD(IDR1, EVENTQS, 16, 5) FIELD(IDR1, CMDQS, 21, 5) + FIELD(IDR1, ATTR_PERMS_OVR, 26, 1) + FIELD(IDR1, ATTR_TYPES_OVR, 27, 1) + FIELD(IDR1, REL, 28, 1) + FIELD(IDR1, QUEUES_PRESET, 29, 1) + FIELD(IDR1, TABLES_PRESET, 30, 1) + FIELD(IDR1, ECMDQ, 31, 1) #define SMMU_IDR1_SIDSIZE 16 #define SMMU_CMDQS 19 #define SMMU_EVENTQS 19 REG32(IDR2, 0x8) + FIELD(IDR2, BA_VATOS, 0, 10) + REG32(IDR3, 0xc) FIELD(IDR3, HAD, 2, 1); + FIELD(IDR3, PBHA, 3, 1); + FIELD(IDR3, XNX, 4, 1); + FIELD(IDR3, PPS, 5, 1); + FIELD(IDR3, MPAM, 7, 1); + FIELD(IDR3, FWB, 8, 1); + FIELD(IDR3, STT, 9, 1); FIELD(IDR3, RIL, 10, 1); FIELD(IDR3, BBML, 11, 2); + FIELD(IDR3, E0PD, 13, 1); + FIELD(IDR3, PTWNNC, 14, 1); + FIELD(IDR3, DPT, 15, 1); + REG32(IDR4, 0x10) + REG32(IDR5, 0x14) FIELD(IDR5, OAS, 0, 3); FIELD(IDR5, GRAN4K, 4, 1); FIELD(IDR5, GRAN16K, 5, 1); FIELD(IDR5, GRAN64K, 6, 1); + FIELD(IDR5, VAX, 10, 2); + FIELD(IDR5, STALL_MAX, 16, 16); #define SMMU_IDR5_OAS 4 -- 2.34.1 In smmuv3_init_regs() when we set the various bits in the ID registers, we do this almost in order of the fields in the registers, but not quite. Move the initialization of SMMU_IDR3.RIL and SMMU_IDR5.OAS into their correct places. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-3-peter.maydell@linaro.org --- hw/arm/smmuv3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->idr[1] = FIELD_DP32(s->idr[1], IDR1, EVENTQS, SMMU_EVENTQS); s->idr[1] = FIELD_DP32(s->idr[1], IDR1, CMDQS, SMMU_CMDQS); - s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, HAD, 1); + s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, BBML, 2); + s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ /* 4K, 16K and 64K granule support */ s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN4K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN16K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN64K, 1); - s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ s->cmdq.base = deposit64(s->cmdq.base, 0, 5, SMMU_CMDQS); s->cmdq.prod = 0; -- 2.34.1 The SMMUv3.1-XNX feature is mandatory for an SMMUv3.1 if S2P is supported, so we should theoretically have implemented it as part of the recent S2P work. Fortunately, for us the implementation is a no-op. This feature is about interpretation of the stage 2 page table descriptor XN bits, which control execute permissions. For QEMU, the permission bits passed to an IOMMU (via MemTxAttrs and IOMMUAccessFlags) only indicate read and write; we do not distinguish data reads from instruction reads outside the CPU proper. In the SMMU architecture's terms, our interconnect between the client device and the SMMU doesn't have the ability to convey the INST attribute, and we therefore use the default value of "data" for this attribute. We also do not support the bits in the Stream Table Entry that can override the on-the-bus transaction attribute permissions (we do not set SMMU_IDR1.ATTR_PERMS_OVR=1). These two things together mean that for our implementation, it never has to deal with transactions with the INST attribute, and so it can correctly ignore the XN bits entirely. So we already implement FEAT_XNX's "XN field is now 2 bits, not 1" behaviour to the extent that we need to. Advertise the presence of the feature in SMMU_IDR3.XNX. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-4-peter.maydell@linaro.org --- hw/arm/smmuv3.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->idr[1] = FIELD_DP32(s->idr[1], IDR1, CMDQS, SMMU_CMDQS); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, HAD, 1); + if (FIELD_EX32(s->idr[0], IDR0, S2P)) { + /* XNX is a stage-2-specific feature */ + s->idr[3] = FIELD_DP32(s->idr[3], IDR3, XNX, 1); + } s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, BBML, 2); -- 2.34.1 FEAT_HPMN0 is a small feature which defines that it is valid for MDCR_EL2.HPMN to be set to 0, meaning "no PMU event counters provided to an EL1 guest" (previously this setting was reserved). QEMU's implementation almost gets HPMN == 0 right, but we need to fix one check in pmevcntr_is_64_bit(). That is enough for us to advertise the feature in the 'max' CPU. (We don't need to make the behaviour conditional on feature presence, because the FEAT_HPMN0 behaviour is within the range of permitted UNPREDICTABLE behaviour for a non-FEAT_HPMN0 implementation.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230921185445.3339214-1-peter.maydell@linaro.org --- docs/system/arm/emulation.rst | 1 + target/arm/helper.c | 2 +- target/arm/tcg/cpu32.c | 4 ++++ target/arm/tcg/cpu64.c | 1 + 4 files changed, 7 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) - FEAT_HPDS2 (Translation table page-based hardware attributes) +- FEAT_HPMN0 (Setting of MDCR_EL2.HPMN to zero) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool pmevcntr_is_64_bit(CPUARMState *env, int counter) bool hlp = env->cp15.mdcr_el2 & MDCR_HLP; int hpmn = env->cp15.mdcr_el2 & MDCR_HPMN; - if (hpmn != 0 && counter >= hpmn) { + if (counter >= hpmn) { return hlp; } } diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) t = FIELD_DP32(t, ID_DFR0, COPSDBG, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 6); /* FEAT_PMUv3p5 */ cpu->isar.id_dfr0 = t; + + t = cpu->isar.id_dfr1; + t = FIELD_DP32(t, ID_DFR1, HPMN0, 1); /* FEAT_HPMN0 */ + cpu->isar.id_dfr1 = t; } /* CPU models. These are not needed for the AArch64 linux-user build. */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = cpu->isar.id_aa64dfr0; t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 6); /* FEAT_PMUv3p5 */ + t = FIELD_DP64(t, ID_AA64DFR0, HPMN0, 1); /* FEAT_HPMN0 */ cpu->isar.id_aa64dfr0 = t; t = cpu->isar.id_aa64smfr0; -- 2.34.1 The include of hw/arm/virt.h in kvm64.c is unnecessary and also a layering violation since the generic KVM code shouldn't need to know anything about board-specifics. The include line is an accidental leftover from commit 15613357ba53a4763, where we cleaned up the code to not depend on virt board internals but forgot to also remove the now-redundant include line. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230925110429.3917202-1-peter.maydell@linaro.org --- target/arm/kvm64.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ #include "internals.h" #include "hw/acpi/acpi.h" #include "hw/acpi/ghes.h" -#include "hw/arm/virt.h" static bool have_guest_debug; -- 2.34.1 The hw/arm/boot.h include in common-semi-target.h is not actually needed, and it's a bit odd because it pulls a hw/arm header into a target/arm file. This include was originally needed because the semihosting code used the arm_boot_info struct to get the base address of the RAM in system emulation, to use in a (bad) heuristic for the return values for the SYS_HEAPINFO semihosting call. We've since overhauled how we calculate the HEAPINFO values in system emulation, and the code no longer uses the arm_boot_info struct. Remove the now-redundant include line, and instead directly include the cpu-qom.h header that we were previously getting via boot.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230925112219.3919261-1-peter.maydell@linaro.org --- target/arm/common-semi-target.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/target/arm/common-semi-target.h b/target/arm/common-semi-target.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/common-semi-target.h +++ b/target/arm/common-semi-target.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_COMMON_SEMI_TARGET_H #define TARGET_ARM_COMMON_SEMI_TARGET_H -#ifndef CONFIG_USER_ONLY -#include "hw/arm/boot.h" -#endif +#include "target/arm/cpu-qom.h" static inline target_ulong common_semi_arg(CPUState *cs, int argno) { -- 2.34.1 The code for powering on a CPU in arm-powerctl.c has two separate use cases: * emulation of a real hardware power controller * emulation of firmware interfaces (primarily PSCI) with CPU on/off APIs For the first case, we only need to reset the CPU and set its starting PC and X0. For the second case, because we're emulating the firmware we need to ensure that it's in the state that the firmware provides. In particular, when we reset to a lower EL than the highest one we are emulating, we need to put the CPU into a state that permits correct running at that lower EL. We already do a little of this in arm-powerctl.c (for instance we set SCR_HCE to enable the HVC insn) but we don't do enough of it. This means that in the case where we are emulating EL3 but also providing emulated PSCI the guest will crash when a secondary core tries to use a feature that needs an SCR_EL3 bit to be set, such as MTE or PAuth. The hw/arm/boot.c code also has to support this "start guest code in an EL that's lower than the highest emulated EL" case in order to do direct guest kernel booting; it has all the necessary initialization code to set the SCR_EL3 bits. Pull the relevant boot.c code out into a separate function so we can share it between there and arm-powerctl.c. This refactoring has a few code changes that look like they might be behaviour changes but aren't: * if info->secure_boot is false and info->secure_board_setup is true, then the old code would start the first CPU in Hyp mode but without changing SCR.NS and NSACR.{CP11,CP10}. This was wrong behaviour because there's no such thing as Secure Hyp mode. The new code will leave the CPU in SVC. (There is no board which sets secure_boot to false and secure_board_setup to true, so this isn't a behaviour change for any of our boards.) * we don't explicitly clear SCR.NS when arm-powerctl.c does a CPU-on to EL3. This was a no-op because CPU reset will reset to NS == 0. And some real behaviour changes: * we no longer set HCR_EL2.RW when booting into EL2: the guest can and should do that themselves before dropping into their EL1 code. (arm-powerctl and boot did this differently; I opted to use the logic from arm-powerctl, which only sets HCR_EL2.RW when it's directly starting the guest in EL1, because it's more correct, and I don't expect guests to be accidentally depending on our having set the RW bit for them.) * if we are booting a CPU into AArch32 Secure SVC then we won't set SCR.HCE any more. This affects only the vexpress-a15 and raspi2b machine types. Guests booting in this case will either: - be able to set SCR.HCE themselves as part of moving from Secure SVC into NS Hyp mode - will move from Secure SVC to NS SVC, and won't care about behaviour of the HVC insn - will stay in Secure SVC, and won't care about HVC * on an arm-powerctl CPU-on we will now set the SCR bits for pauth/mte/sve/sme/hcx/fgt features The first two of these are very minor and I don't expect guest code to trip over them, so I didn't judge it worth convoluting the code in an attempt to keep exactly the same boot.c behaviour. The third change fixes issue 1899. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1899 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230926155619.4028618-1-peter.maydell@linaro.org --- target/arm/cpu.h | 22 +++++++++ hw/arm/boot.c | 95 ++++++++++----------------------------- target/arm/arm-powerctl.c | 53 +--------------------- target/arm/cpu.c | 95 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 141 insertions(+), 124 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs, int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs, int cpuid, DumpState *s); +/** + * arm_emulate_firmware_reset: Emulate firmware CPU reset handling + * @cpu: CPU (which must have been freshly reset) + * @target_el: exception level to put the CPU into + * @secure: whether to put the CPU in secure state + * + * When QEMU is directly running a guest kernel at a lower level than + * EL3 it implicitly emulates some aspects of the guest firmware. + * This includes that on reset we need to configure the parts of the + * CPU corresponding to EL3 so that the real guest code can run at its + * lower exception level. This function does that post-reset CPU setup, + * for when we do direct boot of a guest kernel, and for when we + * emulate PSCI and similar firmware interfaces starting a CPU at a + * lower exception level. + * + * @target_el must be an EL implemented by the CPU between 1 and 3. + * We do not support dropping into a Secure EL other than 3. + * + * It is the responsibility of the caller to call arm_rebuild_hflags(). + */ +void arm_emulate_firmware_reset(CPUState *cpustate, int target_el); + #ifdef TARGET_AARCH64 int aarch64_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) cpu_set_pc(cs, entry); } else { - /* If we are booting Linux then we need to check whether we are - * booting into secure or non-secure state and adjust the state - * accordingly. Out of reset, ARM is defined to be in secure state - * (SCR.NS = 0), we change that here if non-secure boot has been - * requested. + /* + * If we are booting Linux then we might need to do so at: + * - AArch64 NS EL2 or NS EL1 + * - AArch32 Secure SVC (EL3) + * - AArch32 NS Hyp (EL2) + * - AArch32 NS SVC (EL1) + * Configure the CPU in the way boot firmware would do to + * drop us down to the appropriate level. */ - if (arm_feature(env, ARM_FEATURE_EL3)) { - /* AArch64 is defined to come out of reset into EL3 if enabled. - * If we are booting Linux then we need to adjust our EL as - * Linux expects us to be in EL2 or EL1. AArch32 resets into - * SVC, which Linux expects, so no privilege/exception level to - * adjust. - */ - if (env->aarch64) { - env->cp15.scr_el3 |= SCR_RW; - if (arm_feature(env, ARM_FEATURE_EL2)) { - env->cp15.hcr_el2 |= HCR_RW; - env->pstate = PSTATE_MODE_EL2h; - } else { - env->pstate = PSTATE_MODE_EL1h; - } - if (cpu_isar_feature(aa64_pauth, cpu)) { - env->cp15.scr_el3 |= SCR_API | SCR_APK; - } - if (cpu_isar_feature(aa64_mte, cpu)) { - env->cp15.scr_el3 |= SCR_ATA; - } - if (cpu_isar_feature(aa64_sve, cpu)) { - env->cp15.cptr_el[3] |= R_CPTR_EL3_EZ_MASK; - env->vfp.zcr_el[3] = 0xf; - } - if (cpu_isar_feature(aa64_sme, cpu)) { - env->cp15.cptr_el[3] |= R_CPTR_EL3_ESM_MASK; - env->cp15.scr_el3 |= SCR_ENTP2; - env->vfp.smcr_el[3] = 0xf; - } - if (cpu_isar_feature(aa64_hcx, cpu)) { - env->cp15.scr_el3 |= SCR_HXEN; - } - if (cpu_isar_feature(aa64_fgt, cpu)) { - env->cp15.scr_el3 |= SCR_FGTEN; - } + int target_el = arm_feature(env, ARM_FEATURE_EL2) ? 2 : 1; - /* AArch64 kernels never boot in secure mode */ - assert(!info->secure_boot); - /* This hook is only supported for AArch32 currently: - * bootloader_aarch64[] will not call the hook, and - * the code above has already dropped us into EL2 or EL1. - */ - assert(!info->secure_board_setup); - } - - if (arm_feature(env, ARM_FEATURE_EL2)) { - /* If we have EL2 then Linux expects the HVC insn to work */ - env->cp15.scr_el3 |= SCR_HCE; - } - - /* Set to non-secure if not a secure boot */ - if (!info->secure_boot && - (cs != first_cpu || !info->secure_board_setup)) { - /* Linux expects non-secure state */ - env->cp15.scr_el3 |= SCR_NS; - /* Set NSACR.{CP11,CP10} so NS can access the FPU */ - env->cp15.nsacr |= 3 << 10; - } - } - - if (!env->aarch64 && !info->secure_boot && - arm_feature(env, ARM_FEATURE_EL2)) { + if (env->aarch64) { /* - * This is an AArch32 boot not to Secure state, and - * we have Hyp mode available, so boot the kernel into - * Hyp mode. This is not how the CPU comes out of reset, - * so we need to manually put it there. + * AArch64 kernels never boot in secure mode, and we don't + * support the secure_board_setup hook for AArch64. */ - cpsr_write(env, ARM_CPU_MODE_HYP, CPSR_M, CPSRWriteRaw); + assert(!info->secure_boot); + assert(!info->secure_board_setup); + } else { + if (arm_feature(env, ARM_FEATURE_EL3) && + (info->secure_boot || + (info->secure_board_setup && cs == first_cpu))) { + /* Start this CPU in Secure SVC */ + target_el = 3; + } } + arm_emulate_firmware_reset(cs, target_el); + if (cs == first_cpu) { AddressSpace *as = arm_boot_address_space(cpu, info); diff --git a/target/arm/arm-powerctl.c b/target/arm/arm-powerctl.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-powerctl.c +++ b/target/arm/arm-powerctl.c @@ -XXX,XX +XXX,XX @@ static void arm_set_cpu_on_async_work(CPUState *target_cpu_state, /* Initialize the cpu we are turning on */ cpu_reset(target_cpu_state); + arm_emulate_firmware_reset(target_cpu_state, info->target_el); target_cpu_state->halted = 0; - if (info->target_aa64) { - if ((info->target_el < 3) && arm_feature(&target_cpu->env, - ARM_FEATURE_EL3)) { - /* - * As target mode is AArch64, we need to set lower - * exception level (the requested level 2) to AArch64 - */ - target_cpu->env.cp15.scr_el3 |= SCR_RW; - } - - if ((info->target_el < 2) && arm_feature(&target_cpu->env, - ARM_FEATURE_EL2)) { - /* - * As target mode is AArch64, we need to set lower - * exception level (the requested level 1) to AArch64 - */ - target_cpu->env.cp15.hcr_el2 |= HCR_RW; - } - - target_cpu->env.pstate = aarch64_pstate_mode(info->target_el, true); - } else { - /* We are requested to boot in AArch32 mode */ - static const uint32_t mode_for_el[] = { 0, - ARM_CPU_MODE_SVC, - ARM_CPU_MODE_HYP, - ARM_CPU_MODE_SVC }; - - cpsr_write(&target_cpu->env, mode_for_el[info->target_el], CPSR_M, - CPSRWriteRaw); - } - - if (info->target_el == 3) { - /* Processor is in secure mode */ - target_cpu->env.cp15.scr_el3 &= ~SCR_NS; - } else { - /* Processor is not in secure mode */ - target_cpu->env.cp15.scr_el3 |= SCR_NS; - - /* Set NSACR.{CP11,CP10} so NS can access the FPU */ - target_cpu->env.cp15.nsacr |= 3 << 10; - - /* - * If QEMU is providing the equivalent of EL3 firmware, then we need - * to make sure a CPU targeting EL2 comes out of reset with a - * functional HVC insn. - */ - if (arm_feature(&target_cpu->env, ARM_FEATURE_EL3) - && info->target_el == 2) { - target_cpu->env.cp15.scr_el3 |= SCR_HCE; - } - } - /* We check if the started CPU is now at the correct level */ assert(info->target_el == arm_current_el(&target_cpu->env)); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) } } +void arm_emulate_firmware_reset(CPUState *cpustate, int target_el) +{ + ARMCPU *cpu = ARM_CPU(cpustate); + CPUARMState *env = &cpu->env; + bool have_el3 = arm_feature(env, ARM_FEATURE_EL3); + bool have_el2 = arm_feature(env, ARM_FEATURE_EL2); + + /* + * Check we have the EL we're aiming for. If that is the + * highest implemented EL, then cpu_reset has already done + * all the work. + */ + switch (target_el) { + case 3: + assert(have_el3); + return; + case 2: + assert(have_el2); + if (!have_el3) { + return; + } + break; + case 1: + if (!have_el3 && !have_el2) { + return; + } + break; + default: + g_assert_not_reached(); + } + + if (have_el3) { + /* + * Set the EL3 state so code can run at EL2. This should match + * the requirements set by Linux in its booting spec. + */ + if (env->aarch64) { + env->cp15.scr_el3 |= SCR_RW; + if (cpu_isar_feature(aa64_pauth, cpu)) { + env->cp15.scr_el3 |= SCR_API | SCR_APK; + } + if (cpu_isar_feature(aa64_mte, cpu)) { + env->cp15.scr_el3 |= SCR_ATA; + } + if (cpu_isar_feature(aa64_sve, cpu)) { + env->cp15.cptr_el[3] |= R_CPTR_EL3_EZ_MASK; + env->vfp.zcr_el[3] = 0xf; + } + if (cpu_isar_feature(aa64_sme, cpu)) { + env->cp15.cptr_el[3] |= R_CPTR_EL3_ESM_MASK; + env->cp15.scr_el3 |= SCR_ENTP2; + env->vfp.smcr_el[3] = 0xf; + } + if (cpu_isar_feature(aa64_hcx, cpu)) { + env->cp15.scr_el3 |= SCR_HXEN; + } + if (cpu_isar_feature(aa64_fgt, cpu)) { + env->cp15.scr_el3 |= SCR_FGTEN; + } + } + + if (target_el == 2) { + /* If the guest is at EL2 then Linux expects the HVC insn to work */ + env->cp15.scr_el3 |= SCR_HCE; + } + + /* Put CPU into non-secure state */ + env->cp15.scr_el3 |= SCR_NS; + /* Set NSACR.{CP11,CP10} so NS can access the FPU */ + env->cp15.nsacr |= 3 << 10; + } + + if (have_el2 && target_el < 2) { + /* Set EL2 state so code can run at EL1. */ + if (env->aarch64) { + env->cp15.hcr_el2 |= HCR_RW; + } + } + + /* Set the CPU to the desired state */ + if (env->aarch64) { + env->pstate = aarch64_pstate_mode(target_el, true); + } else { + static const uint32_t mode_for_el[] = { + 0, + ARM_CPU_MODE_SVC, + ARM_CPU_MODE_HYP, + ARM_CPU_MODE_SVC, + }; + + cpsr_write(env, mode_for_el[target_el], CPSR_M, CPSRWriteRaw); + } +} + + #if defined(CONFIG_TCG) && !defined(CONFIG_USER_ONLY) static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, -- 2.34.1 From: Chris Rauer <crauer@google.com> The counter register is only 24-bits and counts down. If the timer is running but the qtimer to reset it hasn't fired off yet, there is a chance the regster read can return an invalid result. Signed-off-by: Chris Rauer <crauer@google.com> Message-id: 20230922181411.2697135-1-crauer@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/npcm7xx_timer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count) /* Convert a time interval in nanoseconds to a timer cycle count. */ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) { + if (ns < 0) { + return 0; + } return clock_ns_to_ticks(t->ctrl->clock, ns) / npcm7xx_tcsr_prescaler(t->tcsr); } -- 2.34.1 From: Suraj Shirvankar <surajshirvankar@gmail.com> QEMU coding style uses the glib memory allocation APIs, not the raw libc malloc/free. Switch the allocation and free calls in elf2dmp to use these functions (dropping the now-unneeded checks for failure). Signed-off-by: Suraj Shirvankar <surajshirvankar@gmail.com> Message-id: 169753938460.23804.11418813007617535750-1@git.sr.ht [PMM: also remove NULL checks from g_malloc() calls; beef up commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/addrspace.c | 7 ++----- contrib/elf2dmp/main.c | 9 +++------ contrib/elf2dmp/pdb.c | 19 ++++++++----------- contrib/elf2dmp/qemu_elf.c | 7 ++----- 4 files changed, 15 insertions(+), 27 deletions(-) diff --git a/contrib/elf2dmp/addrspace.c b/contrib/elf2dmp/addrspace.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/addrspace.c +++ b/contrib/elf2dmp/addrspace.c @@ -XXX,XX +XXX,XX @@ int pa_space_create(struct pa_space *ps, QEMU_Elf *qemu_elf) } } - ps->block = malloc(sizeof(*ps->block) * ps->block_nr); - if (!ps->block) { - return 1; - } + ps->block = g_new(struct pa_block, ps->block_nr); for (i = 0; i < phdr_nr; i++) { if (phdr[i].p_type == PT_LOAD) { @@ -XXX,XX +XXX,XX @@ int pa_space_create(struct pa_space *ps, QEMU_Elf *qemu_elf) void pa_space_destroy(struct pa_space *ps) { ps->block_nr = 0; - free(ps->block); + g_free(ps->block); } void va_space_set_dtb(struct va_space *vs, uint64_t dtb) diff --git a/contrib/elf2dmp/main.c b/contrib/elf2dmp/main.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/main.c +++ b/contrib/elf2dmp/main.c @@ -XXX,XX +XXX,XX @@ static KDDEBUGGER_DATA64 *get_kdbg(uint64_t KernBase, struct pdb_reader *pdb, } } - kdbg = malloc(kdbg_hdr.Size); - if (!kdbg) { - return NULL; - } + kdbg = g_malloc(kdbg_hdr.Size); if (va_space_rw(vs, KdDebuggerDataBlock, kdbg, kdbg_hdr.Size, 0)) { eprintf("Failed to extract entire KDBG\n"); - free(kdbg); + g_free(kdbg); return NULL; } @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) } out_kdbg: - free(kdbg); + g_free(kdbg); out_pdb: pdb_exit(&pdb); out_pdb_file: diff --git a/contrib/elf2dmp/pdb.c b/contrib/elf2dmp/pdb.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/pdb.c +++ b/contrib/elf2dmp/pdb.c @@ -XXX,XX +XXX,XX @@ uint64_t pdb_resolve(uint64_t img_base, struct pdb_reader *r, const char *name) static void pdb_reader_ds_exit(struct pdb_reader *r) { - free(r->ds.toc); + g_free(r->ds.toc); } static void pdb_exit_symbols(struct pdb_reader *r) { - free(r->modimage); - free(r->symbols); + g_free(r->modimage); + g_free(r->symbols); } static void pdb_exit_segments(struct pdb_reader *r) { - free(r->segs); + g_free(r->segs); } static void *pdb_ds_read(const PDB_DS_HEADER *header, @@ -XXX,XX +XXX,XX @@ static void *pdb_ds_read(const PDB_DS_HEADER *header, nBlocks = (size + header->block_size - 1) / header->block_size; - buffer = malloc(nBlocks * header->block_size); - if (!buffer) { - return NULL; - } + buffer = g_malloc(nBlocks * header->block_size); for (i = 0; i < nBlocks; i++) { memcpy(buffer + i * header->block_size, (const char *)header + @@ -XXX,XX +XXX,XX @@ static int pdb_init_symbols(struct pdb_reader *r) return 0; out_symbols: - free(symbols); + g_free(symbols); return err; } @@ -XXX,XX +XXX,XX @@ static int pdb_reader_init(struct pdb_reader *r, void *data) out_sym: pdb_exit_symbols(r); out_root: - free(r->ds.root); + g_free(r->ds.root); out_ds: pdb_reader_ds_exit(r); @@ -XXX,XX +XXX,XX @@ static void pdb_reader_exit(struct pdb_reader *r) { pdb_exit_segments(r); pdb_exit_symbols(r); - free(r->ds.root); + g_free(r->ds.root); pdb_reader_ds_exit(r); } diff --git a/contrib/elf2dmp/qemu_elf.c b/contrib/elf2dmp/qemu_elf.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/qemu_elf.c +++ b/contrib/elf2dmp/qemu_elf.c @@ -XXX,XX +XXX,XX @@ static int init_states(QEMU_Elf *qe) printf("%zu CPU states has been found\n", cpu_nr); - qe->state = malloc(sizeof(*qe->state) * cpu_nr); - if (!qe->state) { - return 1; - } + qe->state = g_new(QEMUCPUState*, cpu_nr); cpu_nr = 0; @@ -XXX,XX +XXX,XX @@ static int init_states(QEMU_Elf *qe) static void exit_states(QEMU_Elf *qe) { - free(qe->state); + g_free(qe->state); } static bool check_ehdr(QEMU_Elf *qe) -- 2.34.1