A grab-bag of minor stuff for the end of the year. My to-review queue is not empty, but it it at least in single figures... -- PMM The following changes since commit 5bfbd8170ce7acb98a1834ff49ed7340b0837144: Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging (2020-12-14 20:32:38 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201215 for you to fetch changes up to 23af268566069183285bebbdf95b1b37cb7c0942: hw/block/m25p80: Fix Numonyx fast read dummy cycle count (2020-12-15 13:39:30 +0000) ---------------------------------------------------------------- target-arm queue: * gdbstub: Correct misparsing of vCont C/S requests * openrisc: Move pic_cpu code into CPU object proper * nios2: Move IIC code into CPU object proper * Improve reporting of ROM overlap errors * xlnx-versal: Add USB support * hw/misc/zynq_slcr: Avoid #DIV/0! error * Numonyx: Fix dummy cycles and check for SPI mode on cmds ---------------------------------------------------------------- Joe Komlodi (4): hw/block/m25p80: Make Numonyx config field names more accurate hw/block/m25p80: Fix when VCFG XIP bit is set for Numonyx hw/block/m25p80: Check SPI mode before running some Numonyx commands hw/block/m25p80: Fix Numonyx fast read dummy cycle count Peter Maydell (11): gdbstub: Correct misparsing of vCont C/S requests hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs hw/openrisc/openrisc_sim: Abstract out "get IRQ x of CPU y" target/openrisc: Move pic_cpu code into CPU object proper target/nios2: Move IIC code into CPU object proper target/nios2: Move nios2_check_interrupts() into target/nios2 target/nios2: Use deposit32() to update ipending register hw/core/loader.c: Track last-seen ROM in rom_check_and_register_reset() hw/core/loader.c: Improve reporting of ROM overlap errors elf_ops.h: Don't truncate name of the ROM blobs we create elf_ops.h: Be more verbose with ROM blob names Philippe Mathieu-Daudé (1): hw/misc/zynq_slcr: Avoid #DIV/0! error Sai Pavan Boddu (2): usb: Add versal-usb2-ctrl-regs module usb: xlnx-usb-subsystem: Add xilinx usb subsystem Vikram Garhwal (2): usb: Add DWC3 model arm: xlnx-versal: Connect usb to virt-versal include/hw/arm/xlnx-versal.h | 9 + include/hw/elf_ops.h | 5 +- include/hw/usb/hcd-dwc3.h | 55 +++ include/hw/usb/xlnx-usb-subsystem.h | 45 ++ include/hw/usb/xlnx-versal-usb2-ctrl-regs.h | 45 ++ target/nios2/cpu.h | 3 - target/openrisc/cpu.h | 1 - gdbstub.c | 2 +- hw/arm/xlnx-versal-virt.c | 55 +++ hw/arm/xlnx-versal.c | 26 ++ hw/block/m25p80.c | 158 +++++-- hw/core/loader.c | 67 ++- hw/intc/nios2_iic.c | 95 ---- hw/misc/zynq_slcr.c | 5 + hw/nios2/10m50_devboard.c | 13 +- hw/nios2/cpu_pic.c | 67 --- hw/openrisc/openrisc_sim.c | 46 +- hw/openrisc/pic_cpu.c | 61 --- hw/usb/hcd-dwc3.c | 689 ++++++++++++++++++++++++++++ hw/usb/xlnx-usb-subsystem.c | 94 ++++ hw/usb/xlnx-versal-usb2-ctrl-regs.c | 229 +++++++++ softmmu/vl.c | 1 - target/nios2/cpu.c | 29 ++ target/nios2/op_helper.c | 9 + target/openrisc/cpu.c | 32 ++ MAINTAINERS | 1 - hw/intc/meson.build | 1 - hw/nios2/meson.build | 2 +- hw/openrisc/Kconfig | 1 + hw/openrisc/meson.build | 2 +- hw/usb/Kconfig | 10 + hw/usb/meson.build | 3 + 32 files changed, 1557 insertions(+), 304 deletions(-) create mode 100644 include/hw/usb/hcd-dwc3.h create mode 100644 include/hw/usb/xlnx-usb-subsystem.h create mode 100644 include/hw/usb/xlnx-versal-usb2-ctrl-regs.h delete mode 100644 hw/intc/nios2_iic.c delete mode 100644 hw/nios2/cpu_pic.c delete mode 100644 hw/openrisc/pic_cpu.c create mode 100644 hw/usb/hcd-dwc3.c create mode 100644 hw/usb/xlnx-usb-subsystem.c create mode 100644 hw/usb/xlnx-versal-usb2-ctrl-regs.c In the vCont packet, two of the command actions (C and S) take an argument specifying the signal to be sent to the process/thread, which is sent as an ASCII string of two hex digits which immediately follow the 'C' or 'S' character. Our code for parsing this packet accidentally skipped the first of the two bytes of the signal value, because it started parsing the hex string at 'p + 1' when the preceding code had already moved past the 'C' or 'S' with "cur_action = *p++". This meant that we would only do the right thing for signals below 10, and would misinterpret the rest. For instance, when the debugger wants to send the process a SIGPROF (27 on x86-64) we mangle this into a SIGSEGV (11). Remove the accidental double increment. Fixes: https://bugs.launchpad.net/qemu/+bug/1773743 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20201121210342.10089-1-peter.maydell@linaro.org --- gdbstub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/gdbstub.c b/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/gdbstub.c +++ b/gdbstub.c @@ -XXX,XX +XXX,XX @@ static int gdb_handle_vcont(const char *p) cur_action = *p++; if (cur_action == 'C' || cur_action == 'S') { cur_action = qemu_tolower(cur_action); - res = qemu_strtoul(p + 1, &p, 16, &tmp); + res = qemu_strtoul(p, &p, 16, &tmp); if (res) { goto out; } -- 2.20.1 openrisc_sim_net_init() attempts to connect the IRQ line from the ethernet device to both CPUs in an SMP configuration by simply caling sysbus_connect_irq() for it twice. This doesn't work, because the second connection simply overrides the first. Fix this by creating a TYPE_SPLIT_IRQ to split the IRQ in the SMP case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Message-id: 20201127225127.14770-2-peter.maydell@linaro.org --- hw/openrisc/openrisc_sim.c | 13 +++++++++++-- hw/openrisc/Kconfig | 1 + 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/hw/openrisc/openrisc_sim.c b/hw/openrisc/openrisc_sim.c index XXXXXXX..XXXXXXX 100644 --- a/hw/openrisc/openrisc_sim.c +++ b/hw/openrisc/openrisc_sim.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "sysemu/qtest.h" #include "sysemu/reset.h" +#include "hw/core/split-irq.h" #define KERNEL_LOAD_ADDR 0x100 @@ -XXX,XX +XXX,XX @@ static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors, s = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(s, &error_fatal); - for (i = 0; i < num_cpus; i++) { - sysbus_connect_irq(s, 0, cpu_irqs[i][irq_pin]); + if (num_cpus > 1) { + DeviceState *splitter = qdev_new(TYPE_SPLIT_IRQ); + qdev_prop_set_uint32(splitter, "num-lines", num_cpus); + qdev_realize_and_unref(splitter, NULL, &error_fatal); + for (i = 0; i < num_cpus; i++) { + qdev_connect_gpio_out(splitter, i, cpu_irqs[i][irq_pin]); + } + sysbus_connect_irq(s, 0, qdev_get_gpio_in(splitter, 0)); + } else { + sysbus_connect_irq(s, 0, cpu_irqs[0][irq_pin]); } sysbus_mmio_map(s, 0, base); sysbus_mmio_map(s, 1, descriptors); diff --git a/hw/openrisc/Kconfig b/hw/openrisc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/openrisc/Kconfig +++ b/hw/openrisc/Kconfig @@ -XXX,XX +XXX,XX @@ config OR1K_SIM select SERIAL select OPENCORES_ETH select OMPIC + select SPLIT_IRQ -- 2.20.1 We're about to refactor the OpenRISC pic_cpu code in a way that means that just grabbing the whole qemu_irq[] array of inbound IRQs for a CPU won't be possible any more. Abstract out a function for "return the qemu_irq for IRQ x input of CPU y" so we can more easily replace the implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Message-id: 20201127225127.14770-3-peter.maydell@linaro.org --- hw/openrisc/openrisc_sim.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-) diff --git a/hw/openrisc/openrisc_sim.c b/hw/openrisc/openrisc_sim.c index XXXXXXX..XXXXXXX 100644 --- a/hw/openrisc/openrisc_sim.c +++ b/hw/openrisc/openrisc_sim.c @@ -XXX,XX +XXX,XX @@ static void main_cpu_reset(void *opaque) cpu_set_pc(cs, boot_info.bootstrap_pc); } +static qemu_irq get_cpu_irq(OpenRISCCPU *cpus[], int cpunum, int irq_pin) +{ + return cpus[cpunum]->env.irq[irq_pin]; +} + static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors, - int num_cpus, qemu_irq **cpu_irqs, + int num_cpus, OpenRISCCPU *cpus[], int irq_pin, NICInfo *nd) { DeviceState *dev; @@ -XXX,XX +XXX,XX @@ static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors, qdev_prop_set_uint32(splitter, "num-lines", num_cpus); qdev_realize_and_unref(splitter, NULL, &error_fatal); for (i = 0; i < num_cpus; i++) { - qdev_connect_gpio_out(splitter, i, cpu_irqs[i][irq_pin]); + qdev_connect_gpio_out(splitter, i, get_cpu_irq(cpus, i, irq_pin)); } sysbus_connect_irq(s, 0, qdev_get_gpio_in(splitter, 0)); } else { - sysbus_connect_irq(s, 0, cpu_irqs[0][irq_pin]); + sysbus_connect_irq(s, 0, get_cpu_irq(cpus, 0, irq_pin)); } sysbus_mmio_map(s, 0, base); sysbus_mmio_map(s, 1, descriptors); } static void openrisc_sim_ompic_init(hwaddr base, int num_cpus, - qemu_irq **cpu_irqs, int irq_pin) + OpenRISCCPU *cpus[], int irq_pin) { DeviceState *dev; SysBusDevice *s; @@ -XXX,XX +XXX,XX @@ static void openrisc_sim_ompic_init(hwaddr base, int num_cpus, s = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(s, &error_fatal); for (i = 0; i < num_cpus; i++) { - sysbus_connect_irq(s, i, cpu_irqs[i][irq_pin]); + sysbus_connect_irq(s, i, get_cpu_irq(cpus, i, irq_pin)); } sysbus_mmio_map(s, 0, base); } @@ -XXX,XX +XXX,XX @@ static void openrisc_sim_init(MachineState *machine) { ram_addr_t ram_size = machine->ram_size; const char *kernel_filename = machine->kernel_filename; - OpenRISCCPU *cpu = NULL; + OpenRISCCPU *cpus[2] = {}; MemoryRegion *ram; - qemu_irq *cpu_irqs[2]; qemu_irq serial_irq; int n; unsigned int smp_cpus = machine->smp.cpus; assert(smp_cpus >= 1 && smp_cpus <= 2); for (n = 0; n < smp_cpus; n++) { - cpu = OPENRISC_CPU(cpu_create(machine->cpu_type)); - if (cpu == NULL) { + cpus[n] = OPENRISC_CPU(cpu_create(machine->cpu_type)); + if (cpus[n] == NULL) { fprintf(stderr, "Unable to find CPU definition!\n"); exit(1); } - cpu_openrisc_pic_init(cpu); - cpu_irqs[n] = (qemu_irq *) cpu->env.irq; + cpu_openrisc_pic_init(cpus[n]); - cpu_openrisc_clock_init(cpu); + cpu_openrisc_clock_init(cpus[n]); - qemu_register_reset(main_cpu_reset, cpu); + qemu_register_reset(main_cpu_reset, cpus[n]); } ram = g_malloc(sizeof(*ram)); @@ -XXX,XX +XXX,XX @@ static void openrisc_sim_init(MachineState *machine) if (nd_table[0].used) { openrisc_sim_net_init(0x92000000, 0x92000400, smp_cpus, - cpu_irqs, 4, nd_table); + cpus, 4, nd_table); } if (smp_cpus > 1) { - openrisc_sim_ompic_init(0x98000000, smp_cpus, cpu_irqs, 1); + openrisc_sim_ompic_init(0x98000000, smp_cpus, cpus, 1); - serial_irq = qemu_irq_split(cpu_irqs[0][2], cpu_irqs[1][2]); + serial_irq = qemu_irq_split(get_cpu_irq(cpus, 0, 2), + get_cpu_irq(cpus, 1, 2)); } else { - serial_irq = cpu_irqs[0][2]; + serial_irq = get_cpu_irq(cpus, 0, 2); } serial_mm_init(get_system_memory(), 0x90000000, 0, serial_irq, -- 2.20.1 The openrisc code uses an old style of interrupt handling, where a separate standalone set of qemu_irqs invoke a function openrisc_pic_cpu_handler() which signals the interrupt to the CPU proper by directly calling cpu_interrupt() and cpu_reset_interrupt(). Because CPU objects now inherit (indirectly) from TYPE_DEVICE, they can have GPIO input lines themselves, and the neater modern way to implement this is to simply have the CPU object itself provide the input IRQ lines. Create GPIO inputs to the OpenRISC CPU object, and make the only user of cpu_openrisc_pic_init() wire up directly to those instead. This allows us to delete the hw/openrisc/pic_cpu.c file entirely. This fixes a trivial memory leak reported by Coverity of the IRQs allocated in cpu_openrisc_pic_init(). Fixes: Coverity CID 1421934 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Message-id: 20201127225127.14770-4-peter.maydell@linaro.org --- target/openrisc/cpu.h | 1 - hw/openrisc/openrisc_sim.c | 3 +- hw/openrisc/pic_cpu.c | 61 -------------------------------------- target/openrisc/cpu.c | 32 ++++++++++++++++++++ hw/openrisc/meson.build | 2 +- 5 files changed, 34 insertions(+), 65 deletions(-) delete mode 100644 hw/openrisc/pic_cpu.c diff --git a/target/openrisc/cpu.h b/target/openrisc/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.h +++ b/target/openrisc/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUOpenRISCState { uint32_t picmr; /* Interrupt mask register */ uint32_t picsr; /* Interrupt contrl register*/ #endif - void *irq[32]; /* Interrupt irq input */ } CPUOpenRISCState; /** diff --git a/hw/openrisc/openrisc_sim.c b/hw/openrisc/openrisc_sim.c index XXXXXXX..XXXXXXX 100644 --- a/hw/openrisc/openrisc_sim.c +++ b/hw/openrisc/openrisc_sim.c @@ -XXX,XX +XXX,XX @@ static void main_cpu_reset(void *opaque) static qemu_irq get_cpu_irq(OpenRISCCPU *cpus[], int cpunum, int irq_pin) { - return cpus[cpunum]->env.irq[irq_pin]; + return qdev_get_gpio_in_named(DEVICE(cpus[cpunum]), "IRQ", irq_pin); } static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors, @@ -XXX,XX +XXX,XX @@ static void openrisc_sim_init(MachineState *machine) fprintf(stderr, "Unable to find CPU definition!\n"); exit(1); } - cpu_openrisc_pic_init(cpus[n]); cpu_openrisc_clock_init(cpus[n]); diff --git a/hw/openrisc/pic_cpu.c b/hw/openrisc/pic_cpu.c deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/hw/openrisc/pic_cpu.c +++ /dev/null @@ -XXX,XX +XXX,XX @@ -/* - * OpenRISC Programmable Interrupt Controller support. - * - * Copyright (c) 2011-2012 Jia Liu <proljc@gmail.com> - * Feng Gao <gf91597@gmail.com> - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, see <http://www.gnu.org/licenses/>. - */ - -#include "qemu/osdep.h" -#include "hw/irq.h" -#include "cpu.h" - -/* OpenRISC pic handler */ -static void openrisc_pic_cpu_handler(void *opaque, int irq, int level) -{ - OpenRISCCPU *cpu = (OpenRISCCPU *)opaque; - CPUState *cs = CPU(cpu); - uint32_t irq_bit; - - if (irq > 31 || irq < 0) { - return; - } - - irq_bit = 1U << irq; - - if (level) { - cpu->env.picsr |= irq_bit; - } else { - cpu->env.picsr &= ~irq_bit; - } - - if (cpu->env.picsr & cpu->env.picmr) { - cpu_interrupt(cs, CPU_INTERRUPT_HARD); - } else { - cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD); - cpu->env.picsr = 0; - } -} - -void cpu_openrisc_pic_init(OpenRISCCPU *cpu) -{ - int i; - qemu_irq *qi; - qi = qemu_allocate_irqs(openrisc_pic_cpu_handler, cpu, NR_IRQS); - - for (i = 0; i < NR_IRQS; i++) { - cpu->env.irq[i] = qi[i]; - } -} diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_cpu_reset(DeviceState *dev) #endif } +#ifndef CONFIG_USER_ONLY +static void openrisc_cpu_set_irq(void *opaque, int irq, int level) +{ + OpenRISCCPU *cpu = (OpenRISCCPU *)opaque; + CPUState *cs = CPU(cpu); + uint32_t irq_bit; + + if (irq > 31 || irq < 0) { + return; + } + + irq_bit = 1U << irq; + + if (level) { + cpu->env.picsr |= irq_bit; + } else { + cpu->env.picsr &= ~irq_bit; + } + + if (cpu->env.picsr & cpu->env.picmr) { + cpu_interrupt(cs, CPU_INTERRUPT_HARD); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD); + cpu->env.picsr = 0; + } +} +#endif + static void openrisc_cpu_realizefn(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -XXX,XX +XXX,XX @@ static void openrisc_cpu_initfn(Object *obj) OpenRISCCPU *cpu = OPENRISC_CPU(obj); cpu_set_cpustate_pointers(cpu); + +#ifndef CONFIG_USER_ONLY + qdev_init_gpio_in_named(DEVICE(cpu), openrisc_cpu_set_irq, "IRQ", NR_IRQS); +#endif } /* CPU models */ diff --git a/hw/openrisc/meson.build b/hw/openrisc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/openrisc/meson.build +++ b/hw/openrisc/meson.build @@ -XXX,XX +XXX,XX @@ openrisc_ss = ss.source_set() -openrisc_ss.add(files('pic_cpu.c', 'cputimer.c')) +openrisc_ss.add(files('cputimer.c')) openrisc_ss.add(when: 'CONFIG_OR1K_SIM', if_true: files('openrisc_sim.c')) hw_arch += {'openrisc': openrisc_ss} -- 2.20.1 The Nios2 architecture supports two different interrupt controller options: * The IIC (Internal Interrupt Controller) is part of the CPU itself; it has 32 IRQ input lines and no NMI support. Interrupt status is queried and controlled via the CPU's ipending and istatus registers. * The EIC (External Interrupt Controller) interface allows the CPU to connect to an external interrupt controller. The interface allows the interrupt controller to present a packet of information containing: - handler address - interrupt level - register set - NMI mode QEMU does not model an EIC currently. We do model the IIC, but its implementation is split across code in hw/nios2/cpu_pic.c and hw/intc/nios2_iic.c. The code in those two files has no state of its own -- the IIC state is in the Nios2CPU state struct. Because CPU objects now inherit (indirectly) from TYPE_DEVICE, they can have GPIO input lines themselves, so we can implement the IIC directly in the CPU object the same way that real hardware does. Create named "IRQ" GPIO inputs to the Nios2 CPU object, and make the only user of the IIC wire up directly to those instead. Note that the old code had an "NMI" concept which was entirely unused and also as far as I can see not architecturally correct, since only the EIC has a concept of an NMI. This fixes a Coverity-reported trivial memory leak of the IRQ array allocated in nios2_cpu_pic_init(). Fixes: Coverity CID 1421916 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201129174022.26530-2-peter.maydell@linaro.org Reviewed-by: Wentong Wu <wentong.wu@intel.com> Tested-by: Wentong Wu <wentong.wu@intel.com> --- target/nios2/cpu.h | 1 - hw/intc/nios2_iic.c | 95 --------------------------------------- hw/nios2/10m50_devboard.c | 13 +----- hw/nios2/cpu_pic.c | 31 ------------- target/nios2/cpu.c | 30 +++++++++++++ MAINTAINERS | 1 - hw/intc/meson.build | 1 - 7 files changed, 32 insertions(+), 140 deletions(-) delete mode 100644 hw/intc/nios2_iic.c diff --git a/target/nios2/cpu.h b/target/nios2/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/nios2/cpu.h +++ b/target/nios2/cpu.h @@ -XXX,XX +XXX,XX @@ void nios2_cpu_do_unaligned_access(CPUState *cpu, vaddr addr, MMUAccessType access_type, int mmu_idx, uintptr_t retaddr); -qemu_irq *nios2_cpu_pic_init(Nios2CPU *cpu); void nios2_check_interrupts(CPUNios2State *env); void do_nios2_semihosting(CPUNios2State *env); diff --git a/hw/intc/nios2_iic.c b/hw/intc/nios2_iic.c deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/hw/intc/nios2_iic.c +++ /dev/null @@ -XXX,XX +XXX,XX @@ -/* - * QEMU Altera Internal Interrupt Controller. - * - * Copyright (c) 2012 Chris Wulff <crwulff@gmail.com> - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, see - * <http://www.gnu.org/licenses/lgpl-2.1.html> - */ - -#include "qemu/osdep.h" -#include "qemu/module.h" -#include "qapi/error.h" - -#include "hw/irq.h" -#include "hw/sysbus.h" -#include "cpu.h" -#include "qom/object.h" - -#define TYPE_ALTERA_IIC "altera,iic" -OBJECT_DECLARE_SIMPLE_TYPE(AlteraIIC, ALTERA_IIC) - -struct AlteraIIC { - SysBusDevice parent_obj; - void *cpu; - qemu_irq parent_irq; -}; - -static void update_irq(AlteraIIC *pv) -{ - CPUNios2State *env = &((Nios2CPU *)(pv->cpu))->env; - - qemu_set_irq(pv->parent_irq, - env->regs[CR_IPENDING] & env->regs[CR_IENABLE]); -} - -static void irq_handler(void *opaque, int irq, int level) -{ - AlteraIIC *pv = opaque; - CPUNios2State *env = &((Nios2CPU *)(pv->cpu))->env; - - env->regs[CR_IPENDING] &= ~(1 << irq); - env->regs[CR_IPENDING] |= !!level << irq; - - update_irq(pv); -} - -static void altera_iic_init(Object *obj) -{ - AlteraIIC *pv = ALTERA_IIC(obj); - - qdev_init_gpio_in(DEVICE(pv), irq_handler, 32); - sysbus_init_irq(SYS_BUS_DEVICE(obj), &pv->parent_irq); -} - -static void altera_iic_realize(DeviceState *dev, Error **errp) -{ - struct AlteraIIC *pv = ALTERA_IIC(dev); - - pv->cpu = object_property_get_link(OBJECT(dev), "cpu", &error_abort); -} - -static void altera_iic_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - /* Reason: needs to be wired up, e.g. by nios2_10m50_ghrd_init() */ - dc->user_creatable = false; - dc->realize = altera_iic_realize; -} - -static TypeInfo altera_iic_info = { - .name = TYPE_ALTERA_IIC, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(AlteraIIC), - .instance_init = altera_iic_init, - .class_init = altera_iic_class_init, -}; - -static void altera_iic_register(void) -{ - type_register_static(&altera_iic_info); -} - -type_init(altera_iic_register) diff --git a/hw/nios2/10m50_devboard.c b/hw/nios2/10m50_devboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nios2/10m50_devboard.c +++ b/hw/nios2/10m50_devboard.c @@ -XXX,XX +XXX,XX @@ static void nios2_10m50_ghrd_init(MachineState *machine) ram_addr_t tcm_size = 0x1000; /* 1 kiB, but QEMU limit is 4 kiB */ ram_addr_t ram_base = 0x08000000; ram_addr_t ram_size = 0x08000000; - qemu_irq *cpu_irq, irq[32]; + qemu_irq irq[32]; int i; /* Physical TCM (tb_ram_1k) with alias at 0xc0000000 */ @@ -XXX,XX +XXX,XX @@ static void nios2_10m50_ghrd_init(MachineState *machine) /* Create CPU -- FIXME */ cpu = NIOS2_CPU(cpu_create(TYPE_NIOS2_CPU)); - - /* Register: CPU interrupt controller (PIC) */ - cpu_irq = nios2_cpu_pic_init(cpu); - - /* Register: Internal Interrupt Controller (IIC) */ - dev = qdev_new("altera,iic"); - object_property_add_const_link(OBJECT(dev), "cpu", OBJECT(cpu)); - sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); - sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, cpu_irq[0]); for (i = 0; i < 32; i++) { - irq[i] = qdev_get_gpio_in(dev, i); + irq[i] = qdev_get_gpio_in_named(DEVICE(cpu), "IRQ", i); } /* Register: Altera 16550 UART */ diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nios2/cpu_pic.c +++ b/hw/nios2/cpu_pic.c @@ -XXX,XX +XXX,XX @@ #include "boot.h" -static void nios2_pic_cpu_handler(void *opaque, int irq, int level) -{ - Nios2CPU *cpu = opaque; - CPUNios2State *env = &cpu->env; - CPUState *cs = CPU(cpu); - int type = irq ? CPU_INTERRUPT_NMI : CPU_INTERRUPT_HARD; - - if (type == CPU_INTERRUPT_HARD) { - env->irq_pending = level; - - if (level && (env->regs[CR_STATUS] & CR_STATUS_PIE)) { - env->irq_pending = 0; - cpu_interrupt(cs, type); - } else if (!level) { - env->irq_pending = 0; - cpu_reset_interrupt(cs, type); - } - } else { - if (level) { - cpu_interrupt(cs, type); - } else { - cpu_reset_interrupt(cs, type); - } - } -} - void nios2_check_interrupts(CPUNios2State *env) { if (env->irq_pending && @@ -XXX,XX +XXX,XX @@ void nios2_check_interrupts(CPUNios2State *env) cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HARD); } } - -qemu_irq *nios2_cpu_pic_init(Nios2CPU *cpu) -{ - return qemu_allocate_irqs(nios2_pic_cpu_handler, cpu, 2); -} diff --git a/target/nios2/cpu.c b/target/nios2/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/nios2/cpu.c +++ b/target/nios2/cpu.c @@ -XXX,XX +XXX,XX @@ static void nios2_cpu_reset(DeviceState *dev) #endif } +#ifndef CONFIG_USER_ONLY +static void nios2_cpu_set_irq(void *opaque, int irq, int level) +{ + Nios2CPU *cpu = opaque; + CPUNios2State *env = &cpu->env; + CPUState *cs = CPU(cpu); + + env->regs[CR_IPENDING] &= ~(1 << irq); + env->regs[CR_IPENDING] |= !!level << irq; + + env->irq_pending = env->regs[CR_IPENDING] & env->regs[CR_IENABLE]; + + if (env->irq_pending && (env->regs[CR_STATUS] & CR_STATUS_PIE)) { + env->irq_pending = 0; + cpu_interrupt(cs, CPU_INTERRUPT_HARD); + } else if (!env->irq_pending) { + cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD); + } +} +#endif + static void nios2_cpu_initfn(Object *obj) { Nios2CPU *cpu = NIOS2_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void nios2_cpu_initfn(Object *obj) #if !defined(CONFIG_USER_ONLY) mmu_init(&cpu->env); + + /* + * These interrupt lines model the IIC (internal interrupt + * controller). QEMU does not currently support the EIC + * (external interrupt controller) -- if we did it would be + * a separate device in hw/intc with a custom interface to + * the CPU, and boards using it would not wire up these IRQ lines. + */ + qdev_init_gpio_in_named(DEVICE(cpu), nios2_cpu_set_irq, "IRQ", 32); #endif } diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Marek Vasut <marex@denx.de> S: Maintained F: target/nios2/ F: hw/nios2/ -F: hw/intc/nios2_iic.c F: disas/nios2.c F: default-configs/nios2-softmmu.mak diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_plic.c')) specific_ss.add(when: 'CONFIG_IOAPIC', if_true: files('ioapic.c')) specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC', if_true: files('loongson_liointc.c')) specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c')) -specific_ss.add(when: 'CONFIG_NIOS2', if_true: files('nios2_iic.c')) specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c')) specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c')) specific_ss.add(when: 'CONFIG_OPENPIC_KVM', if_true: files('openpic_kvm.c')) -- 2.20.1 The function nios2_check_interrupts)() looks only at CPU-internal state; it belongs in target/nios2, not hw/nios2. Move it into the same file as its only caller, so it can just be local to that file. This removes the only remaining code from cpu_pic.c, so we can delete that file entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201129174022.26530-3-peter.maydell@linaro.org Reviewed-by: Wentong Wu <wentong.wu@intel.com> Tested-by: Wentong Wu <wentong.wu@intel.com> --- target/nios2/cpu.h | 2 -- hw/nios2/cpu_pic.c | 36 ------------------------------------ target/nios2/op_helper.c | 9 +++++++++ hw/nios2/meson.build | 2 +- 4 files changed, 10 insertions(+), 39 deletions(-) delete mode 100644 hw/nios2/cpu_pic.c diff --git a/target/nios2/cpu.h b/target/nios2/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/nios2/cpu.h +++ b/target/nios2/cpu.h @@ -XXX,XX +XXX,XX @@ void nios2_cpu_do_unaligned_access(CPUState *cpu, vaddr addr, MMUAccessType access_type, int mmu_idx, uintptr_t retaddr); -void nios2_check_interrupts(CPUNios2State *env); - void do_nios2_semihosting(CPUNios2State *env); #define CPU_RESOLVING_TYPE TYPE_NIOS2_CPU diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/hw/nios2/cpu_pic.c +++ /dev/null @@ -XXX,XX +XXX,XX @@ -/* - * Altera Nios2 CPU PIC - * - * Copyright (c) 2016 Marek Vasut <marek.vasut@gmail.com> - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, see - * <http://www.gnu.org/licenses/lgpl-2.1.html> - */ - -#include "qemu/osdep.h" -#include "cpu.h" -#include "hw/irq.h" - -#include "qemu/config-file.h" - -#include "boot.h" - -void nios2_check_interrupts(CPUNios2State *env) -{ - if (env->irq_pending && - (env->regs[CR_STATUS] & CR_STATUS_PIE)) { - env->irq_pending = 0; - cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HARD); - } -} diff --git a/target/nios2/op_helper.c b/target/nios2/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/nios2/op_helper.c +++ b/target/nios2/op_helper.c @@ -XXX,XX +XXX,XX @@ void helper_mmu_write(CPUNios2State *env, uint32_t rn, uint32_t v) mmu_write(env, rn, v); } +static void nios2_check_interrupts(CPUNios2State *env) +{ + if (env->irq_pending && + (env->regs[CR_STATUS] & CR_STATUS_PIE)) { + env->irq_pending = 0; + cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HARD); + } +} + void helper_check_interrupts(CPUNios2State *env) { qemu_mutex_lock_iothread(); diff --git a/hw/nios2/meson.build b/hw/nios2/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/nios2/meson.build +++ b/hw/nios2/meson.build @@ -XXX,XX +XXX,XX @@ nios2_ss = ss.source_set() -nios2_ss.add(files('boot.c', 'cpu_pic.c')) +nios2_ss.add(files('boot.c')) nios2_ss.add(when: 'CONFIG_NIOS2_10M50', if_true: files('10m50_devboard.c')) nios2_ss.add(when: 'CONFIG_NIOS2_GENERIC_NOMMU', if_true: files('generic_nommu.c')) -- 2.20.1 In nios2_cpu_set_irq(), use deposit32() rather than raw shift-and-mask operations to set the appropriate bit in the ipending register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201129174022.26530-4-peter.maydell@linaro.org --- target/nios2/cpu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/nios2/cpu.c b/target/nios2/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/nios2/cpu.c +++ b/target/nios2/cpu.c @@ -XXX,XX +XXX,XX @@ static void nios2_cpu_set_irq(void *opaque, int irq, int level) CPUNios2State *env = &cpu->env; CPUState *cs = CPU(cpu); - env->regs[CR_IPENDING] &= ~(1 << irq); - env->regs[CR_IPENDING] |= !!level << irq; + env->regs[CR_IPENDING] = deposit32(env->regs[CR_IPENDING], irq, 1, !!level); env->irq_pending = env->regs[CR_IPENDING] & env->regs[CR_IENABLE]; -- 2.20.1 In rom_check_and_register_reset() we detect overlaps by looking at whether the ROM blob we're currently examining is in the same address space and starts before the previous ROM blob ends. (This works because the ROM list is kept sorted in order by AddressSpace and then by address.) Instead of keeping the AddressSpace and last address of the previous ROM blob in local variables, just keep a pointer to it. This will allow us to print more useful information when we do detect an overlap. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201129203923.10622-2-peter.maydell@linaro.org --- hw/core/loader.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ static void rom_reset(void *unused) } } +/* Return true if two consecutive ROMs in the ROM list overlap */ +static bool roms_overlap(Rom *last_rom, Rom *this_rom) +{ + if (!last_rom) { + return false; + } + return last_rom->as == this_rom->as && + last_rom->addr + last_rom->romsize > this_rom->addr; +} + int rom_check_and_register_reset(void) { - hwaddr addr = 0; MemoryRegionSection section; - Rom *rom; - AddressSpace *as = NULL; + Rom *rom, *last_rom = NULL; QTAILQ_FOREACH(rom, &roms, next) { if (rom->fw_file) { continue; } if (!rom->mr) { - if ((addr > rom->addr) && (as == rom->as)) { + if (roms_overlap(last_rom, rom)) { fprintf(stderr, "rom: requested regions overlap " "(rom %s. free=0x" TARGET_FMT_plx ", addr=0x" TARGET_FMT_plx ")\n", - rom->name, addr, rom->addr); + rom->name, last_rom->addr + last_rom->romsize, + rom->addr); return -1; } - addr = rom->addr; - addr += rom->romsize; - as = rom->as; + last_rom = rom; } section = memory_region_find(rom->mr ? rom->mr : get_system_memory(), rom->addr, 1); -- 2.20.1 In rom_check_and_register_reset() we report to the user if there is a "ROM region overlap". This has a couple of problems: * the reported information is not very easy to intepret * the function just prints the overlap to stderr (and relies on its single callsite in vl.c to do an error_report() and exit) * only the first overlap encountered is diagnosed Make this function use error_report() and error_printf() and report a more user-friendly report with all the overlaps diagnosed. Sample old output: rom: requested regions overlap (rom dtb. free=0x0000000000008000, addr=0x0000000000000000) qemu-system-aarch64: rom check and register reset failed Sample new output: qemu-system-aarch64: Some ROM regions are overlapping These ROM regions might have been loaded by direct user request or by default. They could be BIOS/firmware images, a guest kernel, initrd or some other file loaded into guest memory. Check whether you intended to load all this guest code, and whether it has been built to load to the correct addresses. The following two regions overlap (in the cpu-memory-0 address space): phdr #0: /home/petmay01/linaro/qemu-misc-tests/ldmia-fault.axf (addresses 0x0000000000000000 - 0x0000000000008000) dtb (addresses 0x0000000000000000 - 0x0000000000100000) The following two regions overlap (in the cpu-memory-0 address space): phdr #1: /home/petmay01/linaro/qemu-misc-tests/bad-psci-call.axf (addresses 0x0000000040000000 - 0x0000000040000010) phdr #0: /home/petmay01/linaro/qemu-misc-tests/bp-test.elf (addresses 0x0000000040000000 - 0x0000000040000020) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201129203923.10622-3-peter.maydell@linaro.org --- hw/core/loader.c | 48 ++++++++++++++++++++++++++++++++++++++++++------ softmmu/vl.c | 1 - 2 files changed, 42 insertions(+), 7 deletions(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ static bool roms_overlap(Rom *last_rom, Rom *this_rom) last_rom->addr + last_rom->romsize > this_rom->addr; } +static const char *rom_as_name(Rom *rom) +{ + const char *name = rom->as ? rom->as->name : NULL; + return name ?: "anonymous"; +} + +static void rom_print_overlap_error_header(void) +{ + error_report("Some ROM regions are overlapping"); + error_printf( + "These ROM regions might have been loaded by " + "direct user request or by default.\n" + "They could be BIOS/firmware images, a guest kernel, " + "initrd or some other file loaded into guest memory.\n" + "Check whether you intended to load all this guest code, and " + "whether it has been built to load to the correct addresses.\n"); +} + +static void rom_print_one_overlap_error(Rom *last_rom, Rom *rom) +{ + error_printf( + "\nThe following two regions overlap (in the %s address space):\n", + rom_as_name(rom)); + error_printf( + " %s (addresses 0x" TARGET_FMT_plx " - 0x" TARGET_FMT_plx ")\n", + last_rom->name, last_rom->addr, last_rom->addr + last_rom->romsize); + error_printf( + " %s (addresses 0x" TARGET_FMT_plx " - 0x" TARGET_FMT_plx ")\n", + rom->name, rom->addr, rom->addr + rom->romsize); +} + int rom_check_and_register_reset(void) { MemoryRegionSection section; Rom *rom, *last_rom = NULL; + bool found_overlap = false; QTAILQ_FOREACH(rom, &roms, next) { if (rom->fw_file) { @@ -XXX,XX +XXX,XX @@ int rom_check_and_register_reset(void) } if (!rom->mr) { if (roms_overlap(last_rom, rom)) { - fprintf(stderr, "rom: requested regions overlap " - "(rom %s. free=0x" TARGET_FMT_plx - ", addr=0x" TARGET_FMT_plx ")\n", - rom->name, last_rom->addr + last_rom->romsize, - rom->addr); - return -1; + if (!found_overlap) { + found_overlap = true; + rom_print_overlap_error_header(); + } + rom_print_one_overlap_error(last_rom, rom); + /* Keep going through the list so we report all overlaps */ } last_rom = rom; } @@ -XXX,XX +XXX,XX @@ int rom_check_and_register_reset(void) rom->isrom = int128_nz(section.size) && memory_region_is_rom(section.mr); memory_region_unref(section.mr); } + if (found_overlap) { + return -1; + } + qemu_register_reset(rom_reset, NULL); roms_loaded = 1; return 0; diff --git a/softmmu/vl.c b/softmmu/vl.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/vl.c +++ b/softmmu/vl.c @@ -XXX,XX +XXX,XX @@ static void qemu_machine_creation_done(void) qemu_run_machine_init_done_notifiers(); if (rom_check_and_register_reset() != 0) { - error_report("rom check and register reset failed"); exit(1); } -- 2.20.1 Currently the load_elf code assembles the ROM blob name into a local 128 byte fixed-size array. Use g_strdup_printf() instead so that we don't truncate the pathname if it happens to be long. (This matters mostly for monitor 'info roms' output and for the error messages if ROM blobs overlap.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201129203923.10622-4-peter.maydell@linaro.org --- include/hw/elf_ops.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/hw/elf_ops.h b/include/hw/elf_ops.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/elf_ops.h +++ b/include/hw/elf_ops.h @@ -XXX,XX +XXX,XX @@ static int glue(load_elf, SZ)(const char *name, int fd, uint64_t addr, low = (uint64_t)-1, high = 0; GMappedFile *mapped_file = NULL; uint8_t *data = NULL; - char label[128]; int ret = ELF_LOAD_FAILED; if (read(fd, &ehdr, sizeof(ehdr)) != sizeof(ehdr)) @@ -XXX,XX +XXX,XX @@ static int glue(load_elf, SZ)(const char *name, int fd, */ if (mem_size != 0) { if (load_rom) { - snprintf(label, sizeof(label), "phdr #%d: %s", i, name); + g_autofree char *label = + g_strdup_printf("phdr #%d: %s", i, name); /* * rom_add_elf_program() takes its own reference to -- 2.20.1 Instead of making the ROM blob name something like: phdr #0: /home/petmay01/linaro/qemu-misc-tests/ldmia-fault.axf make it a little more self-explanatory for people who don't know ELF format details: /home/petmay01/linaro/qemu-misc-tests/ldmia-fault.axf ELF program header segment 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201129203923.10622-5-peter.maydell@linaro.org --- include/hw/elf_ops.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/hw/elf_ops.h b/include/hw/elf_ops.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/elf_ops.h +++ b/include/hw/elf_ops.h @@ -XXX,XX +XXX,XX @@ static int glue(load_elf, SZ)(const char *name, int fd, if (mem_size != 0) { if (load_rom) { g_autofree char *label = - g_strdup_printf("phdr #%d: %s", i, name); + g_strdup_printf("%s ELF program header segment %d", + name, i); /* * rom_add_elf_program() takes its own reference to -- 2.20.1 From: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> This module emulates control registers of versal usb2 controller, this is added just to make guest happy. In general this module would control the phy-reset signal from usb controller, data coherency of the transactions, signals the host system errors received from controller. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1607023357-5096-2-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/usb/xlnx-versal-usb2-ctrl-regs.h | 45 ++++ hw/usb/xlnx-versal-usb2-ctrl-regs.c | 229 ++++++++++++++++++++ hw/usb/meson.build | 1 + 3 files changed, 275 insertions(+) create mode 100644 include/hw/usb/xlnx-versal-usb2-ctrl-regs.h create mode 100644 hw/usb/xlnx-versal-usb2-ctrl-regs.c diff --git a/include/hw/usb/xlnx-versal-usb2-ctrl-regs.h b/include/hw/usb/xlnx-versal-usb2-ctrl-regs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/xlnx-versal-usb2-ctrl-regs.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for + * USB2.0 controller + * + * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef _XLNX_USB2_REGS_H_ +#define _XLNX_USB2_REGS_H_ + +#define TYPE_XILINX_VERSAL_USB2_CTRL_REGS "xlnx.versal-usb2-ctrl-regs" + +#define XILINX_VERSAL_USB2_CTRL_REGS(obj) \ + OBJECT_CHECK(VersalUsb2CtrlRegs, (obj), TYPE_XILINX_VERSAL_USB2_CTRL_REGS) + +#define USB2_REGS_R_MAX ((0x78 / 4) + 1) + +typedef struct VersalUsb2CtrlRegs { + SysBusDevice parent_obj; + MemoryRegion iomem; + qemu_irq irq_ir; + + uint32_t regs[USB2_REGS_R_MAX]; + RegisterInfo regs_info[USB2_REGS_R_MAX]; +} VersalUsb2CtrlRegs; + +#endif diff --git a/hw/usb/xlnx-versal-usb2-ctrl-regs.c b/hw/usb/xlnx-versal-usb2-ctrl-regs.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/xlnx-versal-usb2-ctrl-regs.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for + * USB2.0 controller + * + * This module should control phy_reset, permanent device plugs, frame length + * time adjust & setting of coherency paths. None of which are emulated in + * present model. + * + * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qom/object.h" +#include "migration/vmstate.h" +#include "hw/usb/xlnx-versal-usb2-ctrl-regs.h" + +#ifndef XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG +#define XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG 0 +#endif + +REG32(BUS_FILTER, 0x30) + FIELD(BUS_FILTER, BYPASS, 0, 4) +REG32(PORT, 0x34) + FIELD(PORT, HOST_SMI_BAR_WR, 4, 1) + FIELD(PORT, HOST_SMI_PCI_CMD_REG_WR, 3, 1) + FIELD(PORT, HOST_MSI_ENABLE, 2, 1) + FIELD(PORT, PWR_CTRL_PRSNT, 1, 1) + FIELD(PORT, HUB_PERM_ATTACH, 0, 1) +REG32(JITTER_ADJUST, 0x38) + FIELD(JITTER_ADJUST, FLADJ, 0, 6) +REG32(BIGENDIAN, 0x40) + FIELD(BIGENDIAN, ENDIAN_GS, 0, 1) +REG32(COHERENCY, 0x44) + FIELD(COHERENCY, USB_COHERENCY, 0, 1) +REG32(XHC_BME, 0x48) + FIELD(XHC_BME, XHC_BME, 0, 1) +REG32(REG_CTRL, 0x60) + FIELD(REG_CTRL, SLVERR_ENABLE, 0, 1) +REG32(IR_STATUS, 0x64) + FIELD(IR_STATUS, HOST_SYS_ERR, 1, 1) + FIELD(IR_STATUS, ADDR_DEC_ERR, 0, 1) +REG32(IR_MASK, 0x68) + FIELD(IR_MASK, HOST_SYS_ERR, 1, 1) + FIELD(IR_MASK, ADDR_DEC_ERR, 0, 1) +REG32(IR_ENABLE, 0x6c) + FIELD(IR_ENABLE, HOST_SYS_ERR, 1, 1) + FIELD(IR_ENABLE, ADDR_DEC_ERR, 0, 1) +REG32(IR_DISABLE, 0x70) + FIELD(IR_DISABLE, HOST_SYS_ERR, 1, 1) + FIELD(IR_DISABLE, ADDR_DEC_ERR, 0, 1) +REG32(USB3, 0x78) + +static void ir_update_irq(VersalUsb2CtrlRegs *s) +{ + bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK]; + qemu_set_irq(s->irq_ir, pending); +} + +static void ir_status_postw(RegisterInfo *reg, uint64_t val64) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque); + /* + * TODO: This should also clear USBSTS.HSE field in USB XHCI register. + * May be combine both the modules. + */ + ir_update_irq(s); +} + +static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] &= ~val; + ir_update_irq(s); + return 0; +} + +static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] |= val; + ir_update_irq(s); + return 0; +} + +static const RegisterAccessInfo usb2_ctrl_regs_regs_info[] = { + { .name = "BUS_FILTER", .addr = A_BUS_FILTER, + .rsvd = 0xfffffff0, + },{ .name = "PORT", .addr = A_PORT, + .rsvd = 0xffffffe0, + },{ .name = "JITTER_ADJUST", .addr = A_JITTER_ADJUST, + .reset = 0x20, + .rsvd = 0xffffffc0, + },{ .name = "BIGENDIAN", .addr = A_BIGENDIAN, + .rsvd = 0xfffffffe, + },{ .name = "COHERENCY", .addr = A_COHERENCY, + .rsvd = 0xfffffffe, + },{ .name = "XHC_BME", .addr = A_XHC_BME, + .reset = 0x1, + .rsvd = 0xfffffffe, + },{ .name = "REG_CTRL", .addr = A_REG_CTRL, + .rsvd = 0xfffffffe, + },{ .name = "IR_STATUS", .addr = A_IR_STATUS, + .rsvd = 0xfffffffc, + .w1c = 0x3, + .post_write = ir_status_postw, + },{ .name = "IR_MASK", .addr = A_IR_MASK, + .reset = 0x3, + .rsvd = 0xfffffffc, + .ro = 0x3, + },{ .name = "IR_ENABLE", .addr = A_IR_ENABLE, + .rsvd = 0xfffffffc, + .pre_write = ir_enable_prew, + },{ .name = "IR_DISABLE", .addr = A_IR_DISABLE, + .rsvd = 0xfffffffc, + .pre_write = ir_disable_prew, + },{ .name = "USB3", .addr = A_USB3, + } +}; + +static void usb2_ctrl_regs_reset_init(Object *obj, ResetType type) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } +} + +static void usb2_ctrl_regs_reset_hold(Object *obj) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); + + ir_update_irq(s); +} + +static const MemoryRegionOps usb2_ctrl_regs_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void usb2_ctrl_regs_init(Object *obj) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XILINX_VERSAL_USB2_CTRL_REGS, + USB2_REGS_R_MAX * 4); + reg_array = + register_init_block32(DEVICE(obj), usb2_ctrl_regs_regs_info, + ARRAY_SIZE(usb2_ctrl_regs_regs_info), + s->regs_info, s->regs, + &usb2_ctrl_regs_ops, + XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG, + USB2_REGS_R_MAX * 4); + memory_region_add_subregion(&s->iomem, + 0x0, + &reg_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq_ir); +} + +static const VMStateDescription vmstate_usb2_ctrl_regs = { + .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, VersalUsb2CtrlRegs, USB2_REGS_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void usb2_ctrl_regs_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = usb2_ctrl_regs_reset_init; + rc->phases.hold = usb2_ctrl_regs_reset_hold; + dc->vmsd = &vmstate_usb2_ctrl_regs; +} + +static const TypeInfo usb2_ctrl_regs_info = { + .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(VersalUsb2CtrlRegs), + .class_init = usb2_ctrl_regs_class_init, + .instance_init = usb2_ctrl_regs_init, +}; + +static void usb2_ctrl_regs_register_types(void) +{ + type_register_static(&usb2_ctrl_regs_info); +} + +type_init(usb2_ctrl_regs_register_types) diff --git a/hw/usb/meson.build b/hw/usb/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/meson.build +++ b/hw/usb/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_USB_DWC2', if_true: files('hcd-dwc2.c')) softmmu_ss.add(when: 'CONFIG_TUSB6010', if_true: files('tusb6010.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('chipidea.c')) softmmu_ss.add(when: 'CONFIG_IMX_USBPHY', if_true: files('imx-usb-phy.c')) +specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c')) # emulated usb devices softmmu_ss.add(when: 'CONFIG_USB', if_true: files('dev-hub.c')) -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> This patch adds skeleton model of dwc3 usb controller attached to xhci-sysbus device. It defines global register space of DWC3 controller, global registers control the AXI/AHB interfaces properties, external FIFO support and event count support. All of which are unimplemented at present,we are only supporting core reset and read of ID register. Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1607023357-5096-3-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/usb/hcd-dwc3.h | 55 +++ hw/usb/hcd-dwc3.c | 689 ++++++++++++++++++++++++++++++++++++++ hw/usb/Kconfig | 5 + hw/usb/meson.build | 1 + 4 files changed, 750 insertions(+) create mode 100644 include/hw/usb/hcd-dwc3.h create mode 100644 hw/usb/hcd-dwc3.c diff --git a/include/hw/usb/hcd-dwc3.h b/include/hw/usb/hcd-dwc3.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/hcd-dwc3.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the USB DWC3 host controller emulation. + * + * Copyright (c) 2020 Xilinx Inc. + * + * Written by Vikram Garhwal<fnu.vikram@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#ifndef HCD_DWC3_H +#define HCD_DWC3_H + +#include "hw/usb/hcd-xhci.h" +#include "hw/usb/hcd-xhci-sysbus.h" + +#define TYPE_USB_DWC3 "usb_dwc3" + +#define USB_DWC3(obj) \ + OBJECT_CHECK(USBDWC3, (obj), TYPE_USB_DWC3) + +#define USB_DWC3_R_MAX ((0x530 / 4) + 1) +#define DWC3_SIZE 0x10000 + +typedef struct USBDWC3 { + SysBusDevice parent_obj; + MemoryRegion iomem; + XHCISysbusState sysbus_xhci; + + uint32_t regs[USB_DWC3_R_MAX]; + RegisterInfo regs_info[USB_DWC3_R_MAX]; + + struct { + uint8_t mode; + uint32_t dwc_usb3_user; + } cfg; + +} USBDWC3; + +#endif diff --git a/hw/usb/hcd-dwc3.c b/hw/usb/hcd-dwc3.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc3.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the USB DWC3 host controller emulation. + * + * This model defines global register space of DWC3 controller. Global + * registers control the AXI/AHB interfaces properties, external FIFO support + * and event count support. All of which are unimplemented at present. We are + * only supporting core reset and read of ID register. + * + * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal<fnu.vikram@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qom/object.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "hw/usb/hcd-dwc3.h" +#include "qapi/error.h" + +#ifndef USB_DWC3_ERR_DEBUG +#define USB_DWC3_ERR_DEBUG 0 +#endif + +#define HOST_MODE 1 +#define FIFO_LEN 0x1000 + +REG32(GSBUSCFG0, 0x00) + FIELD(GSBUSCFG0, DATRDREQINFO, 28, 4) + FIELD(GSBUSCFG0, DESRDREQINFO, 24, 4) + FIELD(GSBUSCFG0, DATWRREQINFO, 20, 4) + FIELD(GSBUSCFG0, DESWRREQINFO, 16, 4) + FIELD(GSBUSCFG0, RESERVED_15_12, 12, 4) + FIELD(GSBUSCFG0, DATBIGEND, 11, 1) + FIELD(GSBUSCFG0, DESBIGEND, 10, 1) + FIELD(GSBUSCFG0, RESERVED_9_8, 8, 2) + FIELD(GSBUSCFG0, INCR256BRSTENA, 7, 1) + FIELD(GSBUSCFG0, INCR128BRSTENA, 6, 1) + FIELD(GSBUSCFG0, INCR64BRSTENA, 5, 1) + FIELD(GSBUSCFG0, INCR32BRSTENA, 4, 1) + FIELD(GSBUSCFG0, INCR16BRSTENA, 3, 1) + FIELD(GSBUSCFG0, INCR8BRSTENA, 2, 1) + FIELD(GSBUSCFG0, INCR4BRSTENA, 1, 1) + FIELD(GSBUSCFG0, INCRBRSTENA, 0, 1) +REG32(GSBUSCFG1, 0x04) + FIELD(GSBUSCFG1, RESERVED_31_13, 13, 19) + FIELD(GSBUSCFG1, EN1KPAGE, 12, 1) + FIELD(GSBUSCFG1, PIPETRANSLIMIT, 8, 4) + FIELD(GSBUSCFG1, RESERVED_7_0, 0, 8) +REG32(GTXTHRCFG, 0x08) + FIELD(GTXTHRCFG, RESERVED_31, 31, 1) + FIELD(GTXTHRCFG, RESERVED_30, 30, 1) + FIELD(GTXTHRCFG, USBTXPKTCNTSEL, 29, 1) + FIELD(GTXTHRCFG, RESERVED_28, 28, 1) + FIELD(GTXTHRCFG, USBTXPKTCNT, 24, 4) + FIELD(GTXTHRCFG, USBMAXTXBURSTSIZE, 16, 8) + FIELD(GTXTHRCFG, RESERVED_15, 15, 1) + FIELD(GTXTHRCFG, RESERVED_14, 14, 1) + FIELD(GTXTHRCFG, RESERVED_13_11, 11, 3) + FIELD(GTXTHRCFG, RESERVED_10_0, 0, 11) +REG32(GRXTHRCFG, 0x0c) + FIELD(GRXTHRCFG, RESERVED_31_30, 30, 2) + FIELD(GRXTHRCFG, USBRXPKTCNTSEL, 29, 1) + FIELD(GRXTHRCFG, RESERVED_28, 28, 1) + FIELD(GRXTHRCFG, USBRXPKTCNT, 24, 4) + FIELD(GRXTHRCFG, USBMAXRXBURSTSIZE, 19, 5) + FIELD(GRXTHRCFG, RESERVED_18_16, 16, 3) + FIELD(GRXTHRCFG, RESERVED_15, 15, 1) + FIELD(GRXTHRCFG, RESERVED_14_13, 13, 2) + FIELD(GRXTHRCFG, RESVISOCOUTSPC, 0, 13) +REG32(GCTL, 0x10) + FIELD(GCTL, PWRDNSCALE, 19, 13) + FIELD(GCTL, MASTERFILTBYPASS, 18, 1) + FIELD(GCTL, BYPSSETADDR, 17, 1) + FIELD(GCTL, U2RSTECN, 16, 1) + FIELD(GCTL, FRMSCLDWN, 14, 2) + FIELD(GCTL, PRTCAPDIR, 12, 2) + FIELD(GCTL, CORESOFTRESET, 11, 1) + FIELD(GCTL, U1U2TIMERSCALE, 9, 1) + FIELD(GCTL, DEBUGATTACH, 8, 1) + FIELD(GCTL, RAMCLKSEL, 6, 2) + FIELD(GCTL, SCALEDOWN, 4, 2) + FIELD(GCTL, DISSCRAMBLE, 3, 1) + FIELD(GCTL, U2EXIT_LFPS, 2, 1) + FIELD(GCTL, GBLHIBERNATIONEN, 1, 1) + FIELD(GCTL, DSBLCLKGTNG, 0, 1) +REG32(GPMSTS, 0x14) +REG32(GSTS, 0x18) + FIELD(GSTS, CBELT, 20, 12) + FIELD(GSTS, RESERVED_19_12, 12, 8) + FIELD(GSTS, SSIC_IP, 11, 1) + FIELD(GSTS, OTG_IP, 10, 1) + FIELD(GSTS, BC_IP, 9, 1) + FIELD(GSTS, ADP_IP, 8, 1) + FIELD(GSTS, HOST_IP, 7, 1) + FIELD(GSTS, DEVICE_IP, 6, 1) + FIELD(GSTS, CSRTIMEOUT, 5, 1) + FIELD(GSTS, BUSERRADDRVLD, 4, 1) + FIELD(GSTS, RESERVED_3_2, 2, 2) + FIELD(GSTS, CURMOD, 0, 2) +REG32(GUCTL1, 0x1c) + FIELD(GUCTL1, RESUME_OPMODE_HS_HOST, 10, 1) +REG32(GSNPSID, 0x20) +REG32(GGPIO, 0x24) + FIELD(GGPIO, GPO, 16, 16) + FIELD(GGPIO, GPI, 0, 16) +REG32(GUID, 0x28) +REG32(GUCTL, 0x2c) + FIELD(GUCTL, REFCLKPER, 22, 10) + FIELD(GUCTL, NOEXTRDL, 21, 1) + FIELD(GUCTL, RESERVED_20_18, 18, 3) + FIELD(GUCTL, SPRSCTRLTRANSEN, 17, 1) + FIELD(GUCTL, RESBWHSEPS, 16, 1) + FIELD(GUCTL, RESERVED_15, 15, 1) + FIELD(GUCTL, USBHSTINAUTORETRYEN, 14, 1) + FIELD(GUCTL, ENOVERLAPCHK, 13, 1) + FIELD(GUCTL, EXTCAPSUPPTEN, 12, 1) + FIELD(GUCTL, INSRTEXTRFSBODI, 11, 1) + FIELD(GUCTL, DTCT, 9, 2) + FIELD(GUCTL, DTFT, 0, 9) +REG32(GBUSERRADDRLO, 0x30) +REG32(GBUSERRADDRHI, 0x34) +REG32(GHWPARAMS0, 0x40) + FIELD(GHWPARAMS0, GHWPARAMS0_31_24, 24, 8) + FIELD(GHWPARAMS0, GHWPARAMS0_23_16, 16, 8) + FIELD(GHWPARAMS0, GHWPARAMS0_15_8, 8, 8) + FIELD(GHWPARAMS0, GHWPARAMS0_7_6, 6, 2) + FIELD(GHWPARAMS0, GHWPARAMS0_5_3, 3, 3) + FIELD(GHWPARAMS0, GHWPARAMS0_2_0, 0, 3) +REG32(GHWPARAMS1, 0x44) + FIELD(GHWPARAMS1, GHWPARAMS1_31, 31, 1) + FIELD(GHWPARAMS1, GHWPARAMS1_30, 30, 1) + FIELD(GHWPARAMS1, GHWPARAMS1_29, 29, 1) + FIELD(GHWPARAMS1, GHWPARAMS1_28, 28, 1) + FIELD(GHWPARAMS1, GHWPARAMS1_27, 27, 1) + FIELD(GHWPARAMS1, GHWPARAMS1_26, 26, 1) + FIELD(GHWPARAMS1, GHWPARAMS1_25_24, 24, 2) + FIELD(GHWPARAMS1, GHWPARAMS1_23, 23, 1) + FIELD(GHWPARAMS1, GHWPARAMS1_22_21, 21, 2) + FIELD(GHWPARAMS1, GHWPARAMS1_20_15, 15, 6) + FIELD(GHWPARAMS1, GHWPARAMS1_14_12, 12, 3) + FIELD(GHWPARAMS1, GHWPARAMS1_11_9, 9, 3) + FIELD(GHWPARAMS1, GHWPARAMS1_8_6, 6, 3) + FIELD(GHWPARAMS1, GHWPARAMS1_5_3, 3, 3) + FIELD(GHWPARAMS1, GHWPARAMS1_2_0, 0, 3) +REG32(GHWPARAMS2, 0x48) +REG32(GHWPARAMS3, 0x4c) + FIELD(GHWPARAMS3, GHWPARAMS3_31, 31, 1) + FIELD(GHWPARAMS3, GHWPARAMS3_30_23, 23, 8) + FIELD(GHWPARAMS3, GHWPARAMS3_22_18, 18, 5) + FIELD(GHWPARAMS3, GHWPARAMS3_17_12, 12, 6) + FIELD(GHWPARAMS3, GHWPARAMS3_11, 11, 1) + FIELD(GHWPARAMS3, GHWPARAMS3_10, 10, 1) + FIELD(GHWPARAMS3, GHWPARAMS3_9_8, 8, 2) + FIELD(GHWPARAMS3, GHWPARAMS3_7_6, 6, 2) + FIELD(GHWPARAMS3, GHWPARAMS3_5_4, 4, 2) + FIELD(GHWPARAMS3, GHWPARAMS3_3_2, 2, 2) + FIELD(GHWPARAMS3, GHWPARAMS3_1_0, 0, 2) +REG32(GHWPARAMS4, 0x50) + FIELD(GHWPARAMS4, GHWPARAMS4_31_28, 28, 4) + FIELD(GHWPARAMS4, GHWPARAMS4_27_24, 24, 4) + FIELD(GHWPARAMS4, GHWPARAMS4_23, 23, 1) + FIELD(GHWPARAMS4, GHWPARAMS4_22, 22, 1) + FIELD(GHWPARAMS4, GHWPARAMS4_21, 21, 1) + FIELD(GHWPARAMS4, GHWPARAMS4_20_17, 17, 4) + FIELD(GHWPARAMS4, GHWPARAMS4_16_13, 13, 4) + FIELD(GHWPARAMS4, GHWPARAMS4_12, 12, 1) + FIELD(GHWPARAMS4, GHWPARAMS4_11, 11, 1) + FIELD(GHWPARAMS4, GHWPARAMS4_10_9, 9, 2) + FIELD(GHWPARAMS4, GHWPARAMS4_8_7, 7, 2) + FIELD(GHWPARAMS4, GHWPARAMS4_6, 6, 1) + FIELD(GHWPARAMS4, GHWPARAMS4_5_0, 0, 6) +REG32(GHWPARAMS5, 0x54) + FIELD(GHWPARAMS5, GHWPARAMS5_31_28, 28, 4) + FIELD(GHWPARAMS5, GHWPARAMS5_27_22, 22, 6) + FIELD(GHWPARAMS5, GHWPARAMS5_21_16, 16, 6) + FIELD(GHWPARAMS5, GHWPARAMS5_15_10, 10, 6) + FIELD(GHWPARAMS5, GHWPARAMS5_9_4, 4, 6) + FIELD(GHWPARAMS5, GHWPARAMS5_3_0, 0, 4) +REG32(GHWPARAMS6, 0x58) + FIELD(GHWPARAMS6, GHWPARAMS6_31_16, 16, 16) + FIELD(GHWPARAMS6, BUSFLTRSSUPPORT, 15, 1) + FIELD(GHWPARAMS6, BCSUPPORT, 14, 1) + FIELD(GHWPARAMS6, OTG_SS_SUPPORT, 13, 1) + FIELD(GHWPARAMS6, ADPSUPPORT, 12, 1) + FIELD(GHWPARAMS6, HNPSUPPORT, 11, 1) + FIELD(GHWPARAMS6, SRPSUPPORT, 10, 1) + FIELD(GHWPARAMS6, GHWPARAMS6_9_8, 8, 2) + FIELD(GHWPARAMS6, GHWPARAMS6_7, 7, 1) + FIELD(GHWPARAMS6, GHWPARAMS6_6, 6, 1) + FIELD(GHWPARAMS6, GHWPARAMS6_5_0, 0, 6) +REG32(GHWPARAMS7, 0x5c) + FIELD(GHWPARAMS7, GHWPARAMS7_31_16, 16, 16) + FIELD(GHWPARAMS7, GHWPARAMS7_15_0, 0, 16) +REG32(GDBGFIFOSPACE, 0x60) + FIELD(GDBGFIFOSPACE, SPACE_AVAILABLE, 16, 16) + FIELD(GDBGFIFOSPACE, RESERVED_15_9, 9, 7) + FIELD(GDBGFIFOSPACE, FIFO_QUEUE_SELECT, 0, 9) +REG32(GUCTL2, 0x9c) + FIELD(GUCTL2, RESERVED_31_26, 26, 6) + FIELD(GUCTL2, EN_HP_PM_TIMER, 19, 7) + FIELD(GUCTL2, NOLOWPWRDUR, 15, 4) + FIELD(GUCTL2, RST_ACTBITLATER, 14, 1) + FIELD(GUCTL2, RESERVED_13, 13, 1) + FIELD(GUCTL2, DISABLECFC, 11, 1) +REG32(GUSB2PHYCFG, 0x100) + FIELD(GUSB2PHYCFG, U2_FREECLK_EXISTS, 30, 1) + FIELD(GUSB2PHYCFG, ULPI_LPM_WITH_OPMODE_CHK, 29, 1) + FIELD(GUSB2PHYCFG, RESERVED_25, 25, 1) + FIELD(GUSB2PHYCFG, LSTRD, 22, 3) + FIELD(GUSB2PHYCFG, LSIPD, 19, 3) + FIELD(GUSB2PHYCFG, ULPIEXTVBUSINDIACTOR, 18, 1) + FIELD(GUSB2PHYCFG, ULPIEXTVBUSDRV, 17, 1) + FIELD(GUSB2PHYCFG, RESERVED_16, 16, 1) + FIELD(GUSB2PHYCFG, ULPIAUTORES, 15, 1) + FIELD(GUSB2PHYCFG, RESERVED_14, 14, 1) + FIELD(GUSB2PHYCFG, USBTRDTIM, 10, 4) + FIELD(GUSB2PHYCFG, XCVRDLY, 9, 1) + FIELD(GUSB2PHYCFG, ENBLSLPM, 8, 1) + FIELD(GUSB2PHYCFG, PHYSEL, 7, 1) + FIELD(GUSB2PHYCFG, SUSPENDUSB20, 6, 1) + FIELD(GUSB2PHYCFG, FSINTF, 5, 1) + FIELD(GUSB2PHYCFG, ULPI_UTMI_SEL, 4, 1) + FIELD(GUSB2PHYCFG, PHYIF, 3, 1) + FIELD(GUSB2PHYCFG, TOUTCAL, 0, 3) +REG32(GUSB2I2CCTL, 0x140) +REG32(GUSB2PHYACC_ULPI, 0x180) + FIELD(GUSB2PHYACC_ULPI, RESERVED_31_27, 27, 5) + FIELD(GUSB2PHYACC_ULPI, DISUIPIDRVR, 26, 1) + FIELD(GUSB2PHYACC_ULPI, NEWREGREQ, 25, 1) + FIELD(GUSB2PHYACC_ULPI, VSTSDONE, 24, 1) + FIELD(GUSB2PHYACC_ULPI, VSTSBSY, 23, 1) + FIELD(GUSB2PHYACC_ULPI, REGWR, 22, 1) + FIELD(GUSB2PHYACC_ULPI, REGADDR, 16, 6) + FIELD(GUSB2PHYACC_ULPI, EXTREGADDR, 8, 8) + FIELD(GUSB2PHYACC_ULPI, REGDATA, 0, 8) +REG32(GTXFIFOSIZ0, 0x200) + FIELD(GTXFIFOSIZ0, TXFSTADDR_N, 16, 16) + FIELD(GTXFIFOSIZ0, TXFDEP_N, 0, 16) +REG32(GTXFIFOSIZ1, 0x204) + FIELD(GTXFIFOSIZ1, TXFSTADDR_N, 16, 16) + FIELD(GTXFIFOSIZ1, TXFDEP_N, 0, 16) +REG32(GTXFIFOSIZ2, 0x208) + FIELD(GTXFIFOSIZ2, TXFSTADDR_N, 16, 16) + FIELD(GTXFIFOSIZ2, TXFDEP_N, 0, 16) +REG32(GTXFIFOSIZ3, 0x20c) + FIELD(GTXFIFOSIZ3, TXFSTADDR_N, 16, 16) + FIELD(GTXFIFOSIZ3, TXFDEP_N, 0, 16) +REG32(GTXFIFOSIZ4, 0x210) + FIELD(GTXFIFOSIZ4, TXFSTADDR_N, 16, 16) + FIELD(GTXFIFOSIZ4, TXFDEP_N, 0, 16) +REG32(GTXFIFOSIZ5, 0x214) + FIELD(GTXFIFOSIZ5, TXFSTADDR_N, 16, 16) + FIELD(GTXFIFOSIZ5, TXFDEP_N, 0, 16) +REG32(GRXFIFOSIZ0, 0x280) + FIELD(GRXFIFOSIZ0, RXFSTADDR_N, 16, 16) + FIELD(GRXFIFOSIZ0, RXFDEP_N, 0, 16) +REG32(GRXFIFOSIZ1, 0x284) + FIELD(GRXFIFOSIZ1, RXFSTADDR_N, 16, 16) + FIELD(GRXFIFOSIZ1, RXFDEP_N, 0, 16) +REG32(GRXFIFOSIZ2, 0x288) + FIELD(GRXFIFOSIZ2, RXFSTADDR_N, 16, 16) + FIELD(GRXFIFOSIZ2, RXFDEP_N, 0, 16) +REG32(GEVNTADRLO_0, 0x300) +REG32(GEVNTADRHI_0, 0x304) +REG32(GEVNTSIZ_0, 0x308) + FIELD(GEVNTSIZ_0, EVNTINTRPTMASK, 31, 1) + FIELD(GEVNTSIZ_0, RESERVED_30_16, 16, 15) + FIELD(GEVNTSIZ_0, EVENTSIZ, 0, 16) +REG32(GEVNTCOUNT_0, 0x30c) + FIELD(GEVNTCOUNT_0, EVNT_HANDLER_BUSY, 31, 1) + FIELD(GEVNTCOUNT_0, RESERVED_30_16, 16, 15) + FIELD(GEVNTCOUNT_0, EVNTCOUNT, 0, 16) +REG32(GEVNTADRLO_1, 0x310) +REG32(GEVNTADRHI_1, 0x314) +REG32(GEVNTSIZ_1, 0x318) + FIELD(GEVNTSIZ_1, EVNTINTRPTMASK, 31, 1) + FIELD(GEVNTSIZ_1, RESERVED_30_16, 16, 15) + FIELD(GEVNTSIZ_1, EVENTSIZ, 0, 16) +REG32(GEVNTCOUNT_1, 0x31c) + FIELD(GEVNTCOUNT_1, EVNT_HANDLER_BUSY, 31, 1) + FIELD(GEVNTCOUNT_1, RESERVED_30_16, 16, 15) + FIELD(GEVNTCOUNT_1, EVNTCOUNT, 0, 16) +REG32(GEVNTADRLO_2, 0x320) +REG32(GEVNTADRHI_2, 0x324) +REG32(GEVNTSIZ_2, 0x328) + FIELD(GEVNTSIZ_2, EVNTINTRPTMASK, 31, 1) + FIELD(GEVNTSIZ_2, RESERVED_30_16, 16, 15) + FIELD(GEVNTSIZ_2, EVENTSIZ, 0, 16) +REG32(GEVNTCOUNT_2, 0x32c) + FIELD(GEVNTCOUNT_2, EVNT_HANDLER_BUSY, 31, 1) + FIELD(GEVNTCOUNT_2, RESERVED_30_16, 16, 15) + FIELD(GEVNTCOUNT_2, EVNTCOUNT, 0, 16) +REG32(GEVNTADRLO_3, 0x330) +REG32(GEVNTADRHI_3, 0x334) +REG32(GEVNTSIZ_3, 0x338) + FIELD(GEVNTSIZ_3, EVNTINTRPTMASK, 31, 1) + FIELD(GEVNTSIZ_3, RESERVED_30_16, 16, 15) + FIELD(GEVNTSIZ_3, EVENTSIZ, 0, 16) +REG32(GEVNTCOUNT_3, 0x33c) + FIELD(GEVNTCOUNT_3, EVNT_HANDLER_BUSY, 31, 1) + FIELD(GEVNTCOUNT_3, RESERVED_30_16, 16, 15) + FIELD(GEVNTCOUNT_3, EVNTCOUNT, 0, 16) +REG32(GHWPARAMS8, 0x500) +REG32(GTXFIFOPRIDEV, 0x510) + FIELD(GTXFIFOPRIDEV, RESERVED_31_N, 6, 26) + FIELD(GTXFIFOPRIDEV, GTXFIFOPRIDEV, 0, 6) +REG32(GTXFIFOPRIHST, 0x518) + FIELD(GTXFIFOPRIHST, RESERVED_31_16, 3, 29) + FIELD(GTXFIFOPRIHST, GTXFIFOPRIHST, 0, 3) +REG32(GRXFIFOPRIHST, 0x51c) + FIELD(GRXFIFOPRIHST, RESERVED_31_16, 3, 29) + FIELD(GRXFIFOPRIHST, GRXFIFOPRIHST, 0, 3) +REG32(GDMAHLRATIO, 0x524) + FIELD(GDMAHLRATIO, RESERVED_31_13, 13, 19) + FIELD(GDMAHLRATIO, HSTRXFIFO, 8, 5) + FIELD(GDMAHLRATIO, RESERVED_7_5, 5, 3) + FIELD(GDMAHLRATIO, HSTTXFIFO, 0, 5) +REG32(GFLADJ, 0x530) + FIELD(GFLADJ, GFLADJ_REFCLK_240MHZDECR_PLS1, 31, 1) + FIELD(GFLADJ, GFLADJ_REFCLK_240MHZ_DECR, 24, 7) + FIELD(GFLADJ, GFLADJ_REFCLK_LPM_SEL, 23, 1) + FIELD(GFLADJ, RESERVED_22, 22, 1) + FIELD(GFLADJ, GFLADJ_REFCLK_FLADJ, 8, 14) + FIELD(GFLADJ, GFLADJ_30MHZ_SDBND_SEL, 7, 1) + FIELD(GFLADJ, GFLADJ_30MHZ, 0, 6) + +#define DWC3_GLOBAL_OFFSET 0xC100 +static void reset_csr(USBDWC3 * s) +{ + int i = 0; + /* + * We reset all CSR regs except GCTL, GUCTL, GSTS, GSNPSID, GGPIO, GUID, + * GUSB2PHYCFGn registers and GUSB3PIPECTLn registers. We will skip PHY + * register as we don't implement them. + */ + for (i = 0; i < USB_DWC3_R_MAX; i++) { + switch (i) { + case R_GCTL: + break; + case R_GSTS: + break; + case R_GSNPSID: + break; + case R_GGPIO: + break; + case R_GUID: + break; + case R_GUCTL: + break; + case R_GHWPARAMS0...R_GHWPARAMS7: + break; + case R_GHWPARAMS8: + break; + default: + register_reset(&s->regs_info[i]); + break; + } + } + + xhci_sysbus_reset(DEVICE(&s->sysbus_xhci)); +} + +static void usb_dwc3_gctl_postw(RegisterInfo *reg, uint64_t val64) +{ + USBDWC3 *s = USB_DWC3(reg->opaque); + + if (ARRAY_FIELD_EX32(s->regs, GCTL, CORESOFTRESET)) { + reset_csr(s); + } +} + +static void usb_dwc3_guid_postw(RegisterInfo *reg, uint64_t val64) +{ + USBDWC3 *s = USB_DWC3(reg->opaque); + + s->regs[R_GUID] = s->cfg.dwc_usb3_user; +} + +static const RegisterAccessInfo usb_dwc3_regs_info[] = { + { .name = "GSBUSCFG0", .addr = A_GSBUSCFG0, + .ro = 0xf300, + .unimp = 0xffffffff, + },{ .name = "GSBUSCFG1", .addr = A_GSBUSCFG1, + .reset = 0x300, + .ro = 0xffffe0ff, + .unimp = 0xffffffff, + },{ .name = "GTXTHRCFG", .addr = A_GTXTHRCFG, + .ro = 0xd000ffff, + .unimp = 0xffffffff, + },{ .name = "GRXTHRCFG", .addr = A_GRXTHRCFG, + .ro = 0xd007e000, + .unimp = 0xffffffff, + },{ .name = "GCTL", .addr = A_GCTL, + .reset = 0x30c13004, .post_write = usb_dwc3_gctl_postw, + },{ .name = "GPMSTS", .addr = A_GPMSTS, + .ro = 0xfffffff, + .unimp = 0xffffffff, + },{ .name = "GSTS", .addr = A_GSTS, + .reset = 0x7e800000, + .ro = 0xffffffcf, + .w1c = 0x30, + .unimp = 0xffffffff, + },{ .name = "GUCTL1", .addr = A_GUCTL1, + .reset = 0x198a, + .ro = 0x7800, + .unimp = 0xffffffff, + },{ .name = "GSNPSID", .addr = A_GSNPSID, + .reset = 0x5533330a, + .ro = 0xffffffff, + },{ .name = "GGPIO", .addr = A_GGPIO, + .ro = 0xffff, + .unimp = 0xffffffff, + },{ .name = "GUID", .addr = A_GUID, + .reset = 0x12345678, .post_write = usb_dwc3_guid_postw, + },{ .name = "GUCTL", .addr = A_GUCTL, + .reset = 0x0c808010, + .ro = 0x1c8000, + .unimp = 0xffffffff, + },{ .name = "GBUSERRADDRLO", .addr = A_GBUSERRADDRLO, + .ro = 0xffffffff, + },{ .name = "GBUSERRADDRHI", .addr = A_GBUSERRADDRHI, + .ro = 0xffffffff, + },{ .name = "GHWPARAMS0", .addr = A_GHWPARAMS0, + .ro = 0xffffffff, + },{ .name = "GHWPARAMS1", .addr = A_GHWPARAMS1, + .ro = 0xffffffff, + },{ .name = "GHWPARAMS2", .addr = A_GHWPARAMS2, + .ro = 0xffffffff, + },{ .name = "GHWPARAMS3", .addr = A_GHWPARAMS3, + .ro = 0xffffffff, + },{ .name = "GHWPARAMS4", .addr = A_GHWPARAMS4, + .ro = 0xffffffff, + },{ .name = "GHWPARAMS5", .addr = A_GHWPARAMS5, + .ro = 0xffffffff, + },{ .name = "GHWPARAMS6", .addr = A_GHWPARAMS6, + .ro = 0xffffffff, + },{ .name = "GHWPARAMS7", .addr = A_GHWPARAMS7, + .ro = 0xffffffff, + },{ .name = "GDBGFIFOSPACE", .addr = A_GDBGFIFOSPACE, + .reset = 0xa0000, + .ro = 0xfffffe00, + .unimp = 0xffffffff, + },{ .name = "GUCTL2", .addr = A_GUCTL2, + .reset = 0x40d, + .ro = 0x2000, + .unimp = 0xffffffff, + },{ .name = "GUSB2PHYCFG", .addr = A_GUSB2PHYCFG, + .reset = 0x40102410, + .ro = 0x1e014030, + .unimp = 0xffffffff, + },{ .name = "GUSB2I2CCTL", .addr = A_GUSB2I2CCTL, + .ro = 0xffffffff, + .unimp = 0xffffffff, + },{ .name = "GUSB2PHYACC_ULPI", .addr = A_GUSB2PHYACC_ULPI, + .ro = 0xfd000000, + .unimp = 0xffffffff, + },{ .name = "GTXFIFOSIZ0", .addr = A_GTXFIFOSIZ0, + .reset = 0x2c7000a, + .unimp = 0xffffffff, + },{ .name = "GTXFIFOSIZ1", .addr = A_GTXFIFOSIZ1, + .reset = 0x2d10103, + .unimp = 0xffffffff, + },{ .name = "GTXFIFOSIZ2", .addr = A_GTXFIFOSIZ2, + .reset = 0x3d40103, + .unimp = 0xffffffff, + },{ .name = "GTXFIFOSIZ3", .addr = A_GTXFIFOSIZ3, + .reset = 0x4d70083, + .unimp = 0xffffffff, + },{ .name = "GTXFIFOSIZ4", .addr = A_GTXFIFOSIZ4, + .reset = 0x55a0083, + .unimp = 0xffffffff, + },{ .name = "GTXFIFOSIZ5", .addr = A_GTXFIFOSIZ5, + .reset = 0x5dd0083, + .unimp = 0xffffffff, + },{ .name = "GRXFIFOSIZ0", .addr = A_GRXFIFOSIZ0, + .reset = 0x1c20105, + .unimp = 0xffffffff, + },{ .name = "GRXFIFOSIZ1", .addr = A_GRXFIFOSIZ1, + .reset = 0x2c70000, + .unimp = 0xffffffff, + },{ .name = "GRXFIFOSIZ2", .addr = A_GRXFIFOSIZ2, + .reset = 0x2c70000, + .unimp = 0xffffffff, + },{ .name = "GEVNTADRLO_0", .addr = A_GEVNTADRLO_0, + .unimp = 0xffffffff, + },{ .name = "GEVNTADRHI_0", .addr = A_GEVNTADRHI_0, + .unimp = 0xffffffff, + },{ .name = "GEVNTSIZ_0", .addr = A_GEVNTSIZ_0, + .ro = 0x7fff0000, + .unimp = 0xffffffff, + },{ .name = "GEVNTCOUNT_0", .addr = A_GEVNTCOUNT_0, + .ro = 0x7fff0000, + .unimp = 0xffffffff, + },{ .name = "GEVNTADRLO_1", .addr = A_GEVNTADRLO_1, + .unimp = 0xffffffff, + },{ .name = "GEVNTADRHI_1", .addr = A_GEVNTADRHI_1, + .unimp = 0xffffffff, + },{ .name = "GEVNTSIZ_1", .addr = A_GEVNTSIZ_1, + .ro = 0x7fff0000, + .unimp = 0xffffffff, + },{ .name = "GEVNTCOUNT_1", .addr = A_GEVNTCOUNT_1, + .ro = 0x7fff0000, + .unimp = 0xffffffff, + },{ .name = "GEVNTADRLO_2", .addr = A_GEVNTADRLO_2, + .unimp = 0xffffffff, + },{ .name = "GEVNTADRHI_2", .addr = A_GEVNTADRHI_2, + .unimp = 0xffffffff, + },{ .name = "GEVNTSIZ_2", .addr = A_GEVNTSIZ_2, + .ro = 0x7fff0000, + .unimp = 0xffffffff, + },{ .name = "GEVNTCOUNT_2", .addr = A_GEVNTCOUNT_2, + .ro = 0x7fff0000, + .unimp = 0xffffffff, + },{ .name = "GEVNTADRLO_3", .addr = A_GEVNTADRLO_3, + .unimp = 0xffffffff, + },{ .name = "GEVNTADRHI_3", .addr = A_GEVNTADRHI_3, + .unimp = 0xffffffff, + },{ .name = "GEVNTSIZ_3", .addr = A_GEVNTSIZ_3, + .ro = 0x7fff0000, + .unimp = 0xffffffff, + },{ .name = "GEVNTCOUNT_3", .addr = A_GEVNTCOUNT_3, + .ro = 0x7fff0000, + .unimp = 0xffffffff, + },{ .name = "GHWPARAMS8", .addr = A_GHWPARAMS8, + .ro = 0xffffffff, + },{ .name = "GTXFIFOPRIDEV", .addr = A_GTXFIFOPRIDEV, + .ro = 0xffffffc0, + .unimp = 0xffffffff, + },{ .name = "GTXFIFOPRIHST", .addr = A_GTXFIFOPRIHST, + .ro = 0xfffffff8, + .unimp = 0xffffffff, + },{ .name = "GRXFIFOPRIHST", .addr = A_GRXFIFOPRIHST, + .ro = 0xfffffff8, + .unimp = 0xffffffff, + },{ .name = "GDMAHLRATIO", .addr = A_GDMAHLRATIO, + .ro = 0xffffe0e0, + .unimp = 0xffffffff, + },{ .name = "GFLADJ", .addr = A_GFLADJ, + .reset = 0xc83f020, + .rsvd = 0x40, + .ro = 0x400040, + .unimp = 0xffffffff, + } +}; + +static void usb_dwc3_reset(DeviceState *dev) +{ + USBDWC3 *s = USB_DWC3(dev); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + switch (i) { + case R_GHWPARAMS0...R_GHWPARAMS7: + break; + case R_GHWPARAMS8: + break; + default: + register_reset(&s->regs_info[i]); + }; + } + + xhci_sysbus_reset(DEVICE(&s->sysbus_xhci)); +} + +static const MemoryRegionOps usb_dwc3_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void usb_dwc3_realize(DeviceState *dev, Error **errp) +{ + USBDWC3 *s = USB_DWC3(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Error *err = NULL; + + sysbus_realize(SYS_BUS_DEVICE(&s->sysbus_xhci), &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->iomem, 0, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->sysbus_xhci), 0)); + sysbus_init_mmio(sbd, &s->iomem); + + /* + * Device Configuration + */ + s->regs[R_GHWPARAMS0] = 0x40204048 | s->cfg.mode; + s->regs[R_GHWPARAMS1] = 0x222493b; + s->regs[R_GHWPARAMS2] = 0x12345678; + s->regs[R_GHWPARAMS3] = 0x618c088; + s->regs[R_GHWPARAMS4] = 0x47822004; + s->regs[R_GHWPARAMS5] = 0x4202088; + s->regs[R_GHWPARAMS6] = 0x7850c20; + s->regs[R_GHWPARAMS7] = 0x0; + s->regs[R_GHWPARAMS8] = 0x478; +} + +static void usb_dwc3_init(Object *obj) +{ + USBDWC3 *s = USB_DWC3(obj); + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_USB_DWC3, DWC3_SIZE); + reg_array = + register_init_block32(DEVICE(obj), usb_dwc3_regs_info, + ARRAY_SIZE(usb_dwc3_regs_info), + s->regs_info, s->regs, + &usb_dwc3_ops, + USB_DWC3_ERR_DEBUG, + USB_DWC3_R_MAX * 4); + memory_region_add_subregion(&s->iomem, + DWC3_GLOBAL_OFFSET, + &reg_array->mem); + object_initialize_child(obj, "dwc3-xhci", &s->sysbus_xhci, + TYPE_XHCI_SYSBUS); + qdev_alias_all_properties(DEVICE(&s->sysbus_xhci), obj); + + s->cfg.mode = HOST_MODE; +} + +static const VMStateDescription vmstate_usb_dwc3 = { + .name = "usb-dwc3", + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, USBDWC3, USB_DWC3_R_MAX), + VMSTATE_UINT8(cfg.mode, USBDWC3), + VMSTATE_UINT32(cfg.dwc_usb3_user, USBDWC3), + VMSTATE_END_OF_LIST() + } +}; + +static Property usb_dwc3_properties[] = { + DEFINE_PROP_UINT32("DWC_USB3_USERID", USBDWC3, cfg.dwc_usb3_user, + 0x12345678), + DEFINE_PROP_END_OF_LIST(), +}; + +static void usb_dwc3_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = usb_dwc3_reset; + dc->realize = usb_dwc3_realize; + dc->vmsd = &vmstate_usb_dwc3; + device_class_set_props(dc, usb_dwc3_properties); +} + +static const TypeInfo usb_dwc3_info = { + .name = TYPE_USB_DWC3, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(USBDWC3), + .class_init = usb_dwc3_class_init, + .instance_init = usb_dwc3_init, +}; + +static void usb_dwc3_register_types(void) +{ + type_register_static(&usb_dwc3_info); +} + +type_init(usb_dwc3_register_types) diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Kconfig +++ b/hw/usb/Kconfig @@ -XXX,XX +XXX,XX @@ config IMX_USBPHY bool default y depends on USB + +config USB_DWC3 + bool + select USB_XHCI_SYSBUS + select REGISTER diff --git a/hw/usb/meson.build b/hw/usb/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/meson.build +++ b/hw/usb/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_USB_XHCI_SYSBUS', if_true: files('hcd-xhci-sysbus.c softmmu_ss.add(when: 'CONFIG_USB_XHCI_NEC', if_true: files('hcd-xhci-nec.c')) softmmu_ss.add(when: 'CONFIG_USB_MUSB', if_true: files('hcd-musb.c')) softmmu_ss.add(when: 'CONFIG_USB_DWC2', if_true: files('hcd-dwc2.c')) +softmmu_ss.add(when: 'CONFIG_USB_DWC3', if_true: files('hcd-dwc3.c')) softmmu_ss.add(when: 'CONFIG_TUSB6010', if_true: files('tusb6010.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('chipidea.c')) -- 2.20.1 From: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> This model is a top level integration wrapper for hcd-dwc3 and versal-usb2-ctrl-regs modules, this is used by xilinx versal soc's and future xilinx usb subsystems would also be part of it. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1607023357-5096-4-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/usb/xlnx-usb-subsystem.h | 45 ++++++++++++++ hw/usb/xlnx-usb-subsystem.c | 94 +++++++++++++++++++++++++++++ hw/usb/Kconfig | 5 ++ hw/usb/meson.build | 1 + 4 files changed, 145 insertions(+) create mode 100644 include/hw/usb/xlnx-usb-subsystem.h create mode 100644 hw/usb/xlnx-usb-subsystem.c diff --git a/include/hw/usb/xlnx-usb-subsystem.h b/include/hw/usb/xlnx-usb-subsystem.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/xlnx-usb-subsystem.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx usb subsystem + * + * Copyright (c) 2020 Xilinx Inc. Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef _XLNX_VERSAL_USB_SUBSYSTEM_H_ +#define _XLNX_VERSAL_USB_SUBSYSTEM_H_ + +#include "hw/usb/xlnx-versal-usb2-ctrl-regs.h" +#include "hw/usb/hcd-dwc3.h" + +#define TYPE_XILINX_VERSAL_USB2 "xlnx.versal-usb2" + +#define VERSAL_USB2(obj) \ + OBJECT_CHECK(VersalUsb2, (obj), TYPE_XILINX_VERSAL_USB2) + +typedef struct VersalUsb2 { + SysBusDevice parent_obj; + MemoryRegion dwc3_mr; + MemoryRegion usb2Ctrl_mr; + + VersalUsb2CtrlRegs usb2Ctrl; + USBDWC3 dwc3; +} VersalUsb2; + +#endif diff --git a/hw/usb/xlnx-usb-subsystem.c b/hw/usb/xlnx-usb-subsystem.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/xlnx-usb-subsystem.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx usb subsystem + * + * Copyright (c) 2020 Xilinx Inc. Sai Pavan Boddu <sai.pava.boddu@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qom/object.h" +#include "qapi/error.h" +#include "hw/qdev-properties.h" +#include "hw/usb/xlnx-usb-subsystem.h" + +static void versal_usb2_realize(DeviceState *dev, Error **errp) +{ + VersalUsb2 *s = VERSAL_USB2(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Error *err = NULL; + + sysbus_realize(SYS_BUS_DEVICE(&s->dwc3), &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_realize(SYS_BUS_DEVICE(&s->usb2Ctrl), &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_init_mmio(sbd, &s->dwc3_mr); + sysbus_init_mmio(sbd, &s->usb2Ctrl_mr); + qdev_pass_gpios(DEVICE(&s->dwc3.sysbus_xhci), dev, SYSBUS_DEVICE_GPIO_IRQ); +} + +static void versal_usb2_init(Object *obj) +{ + VersalUsb2 *s = VERSAL_USB2(obj); + + object_initialize_child(obj, "versal.dwc3", &s->dwc3, + TYPE_USB_DWC3); + object_initialize_child(obj, "versal.usb2-ctrl", &s->usb2Ctrl, + TYPE_XILINX_VERSAL_USB2_CTRL_REGS); + memory_region_init_alias(&s->dwc3_mr, obj, "versal.dwc3_alias", + &s->dwc3.iomem, 0, DWC3_SIZE); + memory_region_init_alias(&s->usb2Ctrl_mr, obj, "versal.usb2Ctrl_alias", + &s->usb2Ctrl.iomem, 0, USB2_REGS_R_MAX * 4); + qdev_alias_all_properties(DEVICE(&s->dwc3), obj); + qdev_alias_all_properties(DEVICE(&s->dwc3.sysbus_xhci), obj); + object_property_add_alias(obj, "dma", OBJECT(&s->dwc3.sysbus_xhci), "dma"); +} + +static void versal_usb2_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = versal_usb2_realize; +} + +static const TypeInfo versal_usb2_info = { + .name = TYPE_XILINX_VERSAL_USB2, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(VersalUsb2), + .class_init = versal_usb2_class_init, + .instance_init = versal_usb2_init, +}; + +static void versal_usb_types(void) +{ + type_register_static(&versal_usb2_info); +} + +type_init(versal_usb_types) diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Kconfig +++ b/hw/usb/Kconfig @@ -XXX,XX +XXX,XX @@ config USB_DWC3 bool select USB_XHCI_SYSBUS select REGISTER + +config XLNX_USB_SUBSYS + bool + default y if XLNX_VERSAL + select USB_DWC3 diff --git a/hw/usb/meson.build b/hw/usb/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/meson.build +++ b/hw/usb/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_TUSB6010', if_true: files('tusb6010.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('chipidea.c')) softmmu_ss.add(when: 'CONFIG_IMX_USBPHY', if_true: files('imx-usb-phy.c')) specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c')) +specific_ss.add(when: 'CONFIG_XLNX_USB_SUBSYS', if_true: files('xlnx-usb-subsystem.c')) # emulated usb devices softmmu_ss.add(when: 'CONFIG_USB', if_true: files('dev-hub.c')) -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> Connect VersalUsb2 subsystem to xlnx-versal SOC, its placed in iou of lpd domain and configure it as dual port host controller. Add the respective guest dts nodes for "xlnx-versal-virt" machine. Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1607023357-5096-5-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 9 ++++++ hw/arm/xlnx-versal-virt.c | 55 ++++++++++++++++++++++++++++++++++++ hw/arm/xlnx-versal.c | 26 +++++++++++++++++ 3 files changed, 90 insertions(+) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/cadence_gem.h" #include "hw/rtc/xlnx-zynqmp-rtc.h" #include "qom/object.h" +#include "hw/usb/xlnx-usb-subsystem.h" #define TYPE_XLNX_VERSAL "xlnx-versal" OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL) @@ -XXX,XX +XXX,XX @@ struct Versal { PL011State uart[XLNX_VERSAL_NR_UARTS]; CadenceGEMState gem[XLNX_VERSAL_NR_GEMS]; XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS]; + VersalUsb2 usb; } iou; } lpd; @@ -XXX,XX +XXX,XX @@ struct Versal { #define VERSAL_UART0_IRQ_0 18 #define VERSAL_UART1_IRQ_0 19 +#define VERSAL_USB0_IRQ_0 22 #define VERSAL_GEM0_IRQ_0 56 #define VERSAL_GEM0_WAKE_IRQ_0 57 #define VERSAL_GEM1_IRQ_0 58 @@ -XXX,XX +XXX,XX @@ struct Versal { #define MM_OCM 0xfffc0000U #define MM_OCM_SIZE 0x40000 +#define MM_USB2_CTRL_REGS 0xFF9D0000 +#define MM_USB2_CTRL_REGS_SIZE 0x10000 + +#define MM_USB_0 0xFE200000 +#define MM_USB_0_SIZE 0x10000 + #define MM_TOP_DDR 0x0 #define MM_TOP_DDR_SIZE 0x80000000U #define MM_TOP_DDR_2 0x800000000ULL diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ struct VersalVirt { uint32_t ethernet_phy[2]; uint32_t clk_125Mhz; uint32_t clk_25Mhz; + uint32_t usb; + uint32_t dwc; } phandle; struct arm_boot_info binfo; @@ -XXX,XX +XXX,XX @@ static void fdt_create(VersalVirt *s) s->phandle.clk_25Mhz = qemu_fdt_alloc_phandle(s->fdt); s->phandle.clk_125Mhz = qemu_fdt_alloc_phandle(s->fdt); + s->phandle.usb = qemu_fdt_alloc_phandle(s->fdt); + s->phandle.dwc = qemu_fdt_alloc_phandle(s->fdt); /* Create /chosen node for load_dtb. */ qemu_fdt_add_subnode(s->fdt, "/chosen"); @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(VersalVirt *s) compat, sizeof(compat)); } +static void fdt_add_usb_xhci_nodes(VersalVirt *s) +{ + const char clocknames[] = "bus_clk\0ref_clk"; + const char irq_name[] = "dwc_usb3"; + const char compatVersalDWC3[] = "xlnx,versal-dwc3"; + const char compatDWC3[] = "snps,dwc3"; + char *name = g_strdup_printf("/usb@%" PRIx32, MM_USB2_CTRL_REGS); + + qemu_fdt_add_subnode(s->fdt, name); + qemu_fdt_setprop(s->fdt, name, "compatible", + compatVersalDWC3, sizeof(compatVersalDWC3)); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, MM_USB2_CTRL_REGS, + 2, MM_USB2_CTRL_REGS_SIZE); + qemu_fdt_setprop(s->fdt, name, "clock-names", + clocknames, sizeof(clocknames)); + qemu_fdt_setprop_cells(s->fdt, name, "clocks", + s->phandle.clk_25Mhz, s->phandle.clk_125Mhz); + qemu_fdt_setprop(s->fdt, name, "ranges", NULL, 0); + qemu_fdt_setprop_cell(s->fdt, name, "#address-cells", 2); + qemu_fdt_setprop_cell(s->fdt, name, "#size-cells", 2); + qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.usb); + g_free(name); + + name = g_strdup_printf("/usb@%" PRIx32 "/dwc3@%" PRIx32, + MM_USB2_CTRL_REGS, MM_USB_0); + qemu_fdt_add_subnode(s->fdt, name); + qemu_fdt_setprop(s->fdt, name, "compatible", + compatDWC3, sizeof(compatDWC3)); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, MM_USB_0, 2, MM_USB_0_SIZE); + qemu_fdt_setprop(s->fdt, name, "interrupt-names", + irq_name, sizeof(irq_name)); + qemu_fdt_setprop_cells(s->fdt, name, "interrupts", + GIC_FDT_IRQ_TYPE_SPI, VERSAL_USB0_IRQ_0, + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + qemu_fdt_setprop_cell(s->fdt, name, + "snps,quirk-frame-length-adjustment", 0x20); + qemu_fdt_setprop_cells(s->fdt, name, "#stream-id-cells", 1); + qemu_fdt_setprop_string(s->fdt, name, "dr_mode", "host"); + qemu_fdt_setprop_string(s->fdt, name, "phy-names", "usb3-phy"); + qemu_fdt_setprop(s->fdt, name, "snps,dis_u2_susphy_quirk", NULL, 0); + qemu_fdt_setprop(s->fdt, name, "snps,dis_u3_susphy_quirk", NULL, 0); + qemu_fdt_setprop(s->fdt, name, "snps,refclk_fladj", NULL, 0); + qemu_fdt_setprop(s->fdt, name, "snps,mask_phy_reset", NULL, 0); + qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.dwc); + qemu_fdt_setprop_string(s->fdt, name, "maximum-speed", "high-speed"); + g_free(name); +} + static void fdt_add_uart_nodes(VersalVirt *s) { uint64_t addrs[] = { MM_UART1, MM_UART0 }; @@ -XXX,XX +XXX,XX @@ static void versal_virt_init(MachineState *machine) fdt_add_gic_nodes(s); fdt_add_timer_nodes(s); fdt_add_zdma_nodes(s); + fdt_add_usb_xhci_nodes(s); fdt_add_sd_nodes(s); fdt_add_rtc_node(s); fdt_add_cpu_nodes(s, psci_conduit); diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_uarts(Versal *s, qemu_irq *pic) } } +static void versal_create_usbs(Versal *s, qemu_irq *pic) +{ + DeviceState *dev; + MemoryRegion *mr; + + object_initialize_child(OBJECT(s), "usb2", &s->lpd.iou.usb, + TYPE_XILINX_VERSAL_USB2); + dev = DEVICE(&s->lpd.iou.usb); + + object_property_set_link(OBJECT(dev), "dma", OBJECT(&s->mr_ps), + &error_abort); + qdev_prop_set_uint32(dev, "intrs", 1); + qdev_prop_set_uint32(dev, "slots", 2); + + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); + + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); + memory_region_add_subregion(&s->mr_ps, MM_USB_0, mr); + + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[VERSAL_USB0_IRQ_0]); + + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); + memory_region_add_subregion(&s->mr_ps, MM_USB2_CTRL_REGS, mr); +} + static void versal_create_gems(Versal *s, qemu_irq *pic) { int i; @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_apu_cpus(s); versal_create_apu_gic(s, pic); versal_create_uarts(s, pic); + versal_create_usbs(s, pic); versal_create_gems(s, pic); versal_create_admas(s, pic); versal_create_sds(s, pic); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Malicious user can set the feedback divisor for the PLLs to zero, triggering a floating-point exception (SIGFPE). As the datasheet [*] is not clear how hardware behaves when these bits are zeroes, use the maximum divisor possible (128) to avoid the software FPE. [*] Zynq-7000 TRM, UG585 (v1.12.2) B.28 System Level Control Registers (slcr) -> "Register (slcr) ARM_PLL_CTRL" 25.10.4 PLLs -> "Software-Controlled PLL Update" Fixes: 38867cb7ec9 ("hw/misc/zynq_slcr: add clock generation for uarts") Reported-by: Gaoning Pan <pgn@zju.edu.cn> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20201210141610.884600-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/zynq_slcr.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/zynq_slcr.c +++ b/hw/misc/zynq_slcr.c @@ -XXX,XX +XXX,XX @@ static uint64_t zynq_slcr_compute_pll(uint64_t input, uint32_t ctrl_reg) return 0; } + /* Consider zero feedback as maximum divide ratio possible */ + if (!mult) { + mult = 1 << R_xxx_PLL_CTRL_PLL_FPDIV_LENGTH; + } + /* frequency multiplier -> period division */ return input / mult; } -- 2.20.1 From: Joe Komlodi <joe.komlodi@xilinx.com> The previous naming of the configuration registers made it sound like that if the bits were set the settings would be enabled, while the opposite is true. Signed-off-by: Joe Komlodi <komlodi@xilinx.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Message-id: 1605568264-26376-2-git-send-email-komlodi@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/block/m25p80.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -XXX,XX +XXX,XX @@ typedef struct FlashPartInfo { #define VCFG_WRAP_SEQUENTIAL 0x2 #define NVCFG_XIP_MODE_DISABLED (7 << 9) #define NVCFG_XIP_MODE_MASK (7 << 9) -#define VCFG_XIP_MODE_ENABLED (1 << 3) +#define VCFG_XIP_MODE_DISABLED (1 << 3) #define CFG_DUMMY_CLK_LEN 4 #define NVCFG_DUMMY_CLK_POS 12 #define VCFG_DUMMY_CLK_POS 4 @@ -XXX,XX +XXX,XX @@ typedef struct FlashPartInfo { #define EVCFG_VPP_ACCELERATOR (1 << 3) #define EVCFG_RESET_HOLD_ENABLED (1 << 4) #define NVCFG_DUAL_IO_MASK (1 << 2) -#define EVCFG_DUAL_IO_ENABLED (1 << 6) +#define EVCFG_DUAL_IO_DISABLED (1 << 6) #define NVCFG_QUAD_IO_MASK (1 << 3) -#define EVCFG_QUAD_IO_ENABLED (1 << 7) +#define EVCFG_QUAD_IO_DISABLED (1 << 7) #define NVCFG_4BYTE_ADDR_MASK (1 << 0) #define NVCFG_LOWER_SEGMENT_MASK (1 << 1) @@ -XXX,XX +XXX,XX @@ static void reset_memory(Flash *s) s->volatile_cfg |= VCFG_WRAP_SEQUENTIAL; if ((s->nonvolatile_cfg & NVCFG_XIP_MODE_MASK) != NVCFG_XIP_MODE_DISABLED) { - s->volatile_cfg |= VCFG_XIP_MODE_ENABLED; + s->volatile_cfg |= VCFG_XIP_MODE_DISABLED; } s->volatile_cfg |= deposit32(s->volatile_cfg, VCFG_DUMMY_CLK_POS, @@ -XXX,XX +XXX,XX @@ static void reset_memory(Flash *s) s->enh_volatile_cfg |= EVCFG_VPP_ACCELERATOR; s->enh_volatile_cfg |= EVCFG_RESET_HOLD_ENABLED; if (s->nonvolatile_cfg & NVCFG_DUAL_IO_MASK) { - s->enh_volatile_cfg |= EVCFG_DUAL_IO_ENABLED; + s->enh_volatile_cfg |= EVCFG_DUAL_IO_DISABLED; } if (s->nonvolatile_cfg & NVCFG_QUAD_IO_MASK) { - s->enh_volatile_cfg |= EVCFG_QUAD_IO_ENABLED; + s->enh_volatile_cfg |= EVCFG_QUAD_IO_DISABLED; } if (!(s->nonvolatile_cfg & NVCFG_4BYTE_ADDR_MASK)) { s->four_bytes_address_mode = true; -- 2.20.1 From: Joe Komlodi <joe.komlodi@xilinx.com> VCFG XIP is set (disabled) when the NVCFG XIP bits are all set (disabled). Signed-off-by: Joe Komlodi <komlodi@xilinx.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Message-id: 1605568264-26376-3-git-send-email-komlodi@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/block/m25p80.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -XXX,XX +XXX,XX @@ static void reset_memory(Flash *s) s->volatile_cfg |= VCFG_DUMMY; s->volatile_cfg |= VCFG_WRAP_SEQUENTIAL; if ((s->nonvolatile_cfg & NVCFG_XIP_MODE_MASK) - != NVCFG_XIP_MODE_DISABLED) { + == NVCFG_XIP_MODE_DISABLED) { s->volatile_cfg |= VCFG_XIP_MODE_DISABLED; } s->volatile_cfg |= deposit32(s->volatile_cfg, -- 2.20.1 From: Joe Komlodi <joe.komlodi@xilinx.com> Some Numonyx flash commands cannot be executed in DIO and QIO mode, such as trying to do DPP or DOR when in QIO mode. Signed-off-by: Joe Komlodi <komlodi@xilinx.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Message-id: 1605568264-26376-4-git-send-email-komlodi@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/block/m25p80.c | 114 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 95 insertions(+), 19 deletions(-) diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -XXX,XX +XXX,XX @@ typedef enum { MAN_GENERIC, } Manufacturer; +typedef enum { + MODE_STD = 0, + MODE_DIO = 1, + MODE_QIO = 2 +} SPIMode; + #define M25P80_INTERNAL_DATA_BUFFER_SZ 16 struct Flash { @@ -XXX,XX +XXX,XX @@ static void reset_memory(Flash *s) trace_m25p80_reset_done(s); } +static uint8_t numonyx_mode(Flash *s) +{ + if (!(s->enh_volatile_cfg & EVCFG_QUAD_IO_DISABLED)) { + return MODE_QIO; + } else if (!(s->enh_volatile_cfg & EVCFG_DUAL_IO_DISABLED)) { + return MODE_DIO; + } else { + return MODE_STD; + } +} + static void decode_fast_read_cmd(Flash *s) { s->needed_bytes = get_addr_length(s); @@ -XXX,XX +XXX,XX @@ static void decode_new_cmd(Flash *s, uint32_t value) case ERASE4_32K: case ERASE_SECTOR: case ERASE4_SECTOR: - case READ: - case READ4: - case DPP: - case QPP: - case QPP_4: case PP: case PP4: - case PP4_4: case DIE_ERASE: case RDID_90: case RDID_AB: @@ -XXX,XX +XXX,XX @@ static void decode_new_cmd(Flash *s, uint32_t value) s->len = 0; s->state = STATE_COLLECTING_DATA; break; + case READ: + case READ4: + if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) == MODE_STD) { + s->needed_bytes = get_addr_length(s); + s->pos = 0; + s->len = 0; + s->state = STATE_COLLECTING_DATA; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in " + "DIO or QIO mode\n", s->cmd_in_progress); + } + break; + case DPP: + if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_QIO) { + s->needed_bytes = get_addr_length(s); + s->pos = 0; + s->len = 0; + s->state = STATE_COLLECTING_DATA; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in " + "QIO mode\n", s->cmd_in_progress); + } + break; + case QPP: + case QPP_4: + case PP4_4: + if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_DIO) { + s->needed_bytes = get_addr_length(s); + s->pos = 0; + s->len = 0; + s->state = STATE_COLLECTING_DATA; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in " + "DIO mode\n", s->cmd_in_progress); + } + break; case FAST_READ: case FAST_READ4: + decode_fast_read_cmd(s); + break; case DOR: case DOR4: + if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_QIO) { + decode_fast_read_cmd(s); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in " + "QIO mode\n", s->cmd_in_progress); + } + break; case QOR: case QOR4: - decode_fast_read_cmd(s); + if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_DIO) { + decode_fast_read_cmd(s); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in " + "DIO mode\n", s->cmd_in_progress); + } break; case DIOR: case DIOR4: - decode_dio_read_cmd(s); + if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_QIO) { + decode_dio_read_cmd(s); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in " + "QIO mode\n", s->cmd_in_progress); + } break; case QIOR: case QIOR4: - decode_qio_read_cmd(s); + if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_DIO) { + decode_qio_read_cmd(s); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in " + "DIO mode\n", s->cmd_in_progress); + } break; case WRSR: @@ -XXX,XX +XXX,XX @@ static void decode_new_cmd(Flash *s, uint32_t value) break; case JEDEC_READ: - trace_m25p80_populated_jedec(s); - for (i = 0; i < s->pi->id_len; i++) { - s->data[i] = s->pi->id[i]; - } - for (; i < SPI_NOR_MAX_ID_LEN; i++) { - s->data[i] = 0; - } + if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) == MODE_STD) { + trace_m25p80_populated_jedec(s); + for (i = 0; i < s->pi->id_len; i++) { + s->data[i] = s->pi->id[i]; + } + for (; i < SPI_NOR_MAX_ID_LEN; i++) { + s->data[i] = 0; + } - s->len = SPI_NOR_MAX_ID_LEN; - s->pos = 0; - s->state = STATE_READING_DATA; + s->len = SPI_NOR_MAX_ID_LEN; + s->pos = 0; + s->state = STATE_READING_DATA; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute JEDEC read " + "in DIO or QIO mode\n"); + } break; case RDCR: -- 2.20.1 From: Joe Komlodi <joe.komlodi@xilinx.com> Numonyx chips determine the number of cycles to wait based on bits 7:4 in the volatile configuration register. However, if these bits are 0x0 or 0xF, the number of dummy cycles to wait is 10 for QIOR and QIOR4 commands or when in QIO mode, and otherwise 8 for the currently supported fast read commands. [1] [1] https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_02g_cbb_0.pdf?rev=9b167fbf2b3645efba6385949a72e453 Signed-off-by: Joe Komlodi <komlodi@xilinx.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Message-id: 1605568264-26376-5-git-send-email-komlodi@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/block/m25p80.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -XXX,XX +XXX,XX @@ static uint8_t numonyx_mode(Flash *s) } } +static uint8_t numonyx_extract_cfg_num_dummies(Flash *s) +{ + uint8_t num_dummies; + uint8_t mode; + assert(get_man(s) == MAN_NUMONYX); + + mode = numonyx_mode(s); + num_dummies = extract32(s->volatile_cfg, 4, 4); + + if (num_dummies == 0x0 || num_dummies == 0xf) { + switch (s->cmd_in_progress) { + case QIOR: + case QIOR4: + num_dummies = 10; + break; + default: + num_dummies = (mode == MODE_QIO) ? 10 : 8; + break; + } + } + + return num_dummies; +} + static void decode_fast_read_cmd(Flash *s) { s->needed_bytes = get_addr_length(s); @@ -XXX,XX +XXX,XX @@ static void decode_fast_read_cmd(Flash *s) s->needed_bytes += 8; break; case MAN_NUMONYX: - s->needed_bytes += extract32(s->volatile_cfg, 4, 4); + s->needed_bytes += numonyx_extract_cfg_num_dummies(s); break; case MAN_MACRONIX: if (extract32(s->volatile_cfg, 6, 2) == 1) { @@ -XXX,XX +XXX,XX @@ static void decode_dio_read_cmd(Flash *s) ); break; case MAN_NUMONYX: - s->needed_bytes += extract32(s->volatile_cfg, 4, 4); + s->needed_bytes += numonyx_extract_cfg_num_dummies(s); break; case MAN_MACRONIX: switch (extract32(s->volatile_cfg, 6, 2)) { @@ -XXX,XX +XXX,XX @@ static void decode_qio_read_cmd(Flash *s) ); break; case MAN_NUMONYX: - s->needed_bytes += extract32(s->volatile_cfg, 4, 4); + s->needed_bytes += numonyx_extract_cfg_num_dummies(s); break; case MAN_MACRONIX: switch (extract32(s->volatile_cfg, 6, 2)) { -- 2.20.1 The following changes since commit 3db29dcac23da85486704ef9e7a8e7217f7829cd: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-01-12 13:51:36 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230113 for you to fetch changes up to 08899b5c68a55a3780d707e2464073c8f2670d31: target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled (2023-01-13 13:19:36 +0000) ---------------------------------------------------------------- target-arm queue: hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 board cubieboard: Support booting from an SD card image with u-boot on it target/arm: Fix sve_probe_page target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled various code cleanups ---------------------------------------------------------------- Evgeny Iakovlev (1): target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled Felipe Balbi (2): hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 Philippe Mathieu-Daudé (27): hw/arm/pxa2xx: Simplify pxa255_init() hw/arm/pxa2xx: Simplify pxa270_init() hw/arm/collie: Use the IEC binary prefix definitions hw/arm/collie: Simplify flash creation using for() loop hw/arm/gumstix: Improve documentation hw/arm/gumstix: Use the IEC binary prefix definitions hw/arm/mainstone: Use the IEC binary prefix definitions hw/arm/musicpal: Use the IEC binary prefix definitions hw/arm/omap_sx1: Remove unused 'total_ram' definitions hw/arm/omap_sx1: Use the IEC binary prefix definitions hw/arm/z2: Use the IEC binary prefix definitions hw/arm/vexpress: Remove dead code in vexpress_common_init() hw/arm: Remove unreachable code calling pflash_cfi01_register() hw/arm/pxa: Avoid forward-declaring PXA2xxI2CState hw/gpio/omap_gpio: Add local variable to avoid embedded cast hw/arm/omap: Drop useless casts from void * to pointer hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP1_GPIO type name hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP2_GPIO type name hw/intc/omap_intc: Use CamelCase for TYPE_OMAP_INTC type name hw/arm/stellaris: Drop useless casts from void * to pointer hw/arm/stellaris: Use CamelCase for STELLARIS_ADC type name hw/arm/bcm2836: Remove definitions generated by OBJECT_DECLARE_TYPE() hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/misc/sbsa_ec: Rename TYPE_SBSA_EC -> TYPE_SBSA_SECURE_EC hw/misc/sbsa_ec: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/intc/xilinx_intc: Use 'XpsIntc' typedef instead of 'struct xlx_pic' hw/timer/xilinx_timer: Use XpsTimerState instead of 'struct timerblock' Richard Henderson (1): target/arm: Fix sve_probe_page Strahinja Jankovic (7): hw/misc: Allwinner-A10 Clock Controller Module Emulation hw/misc: Allwinner A10 DRAM Controller Emulation {hw/i2c,docs/system/arm}: Allwinner TWI/I2C Emulation hw/misc: AXP209 PMU Emulation hw/arm: Add AXP209 to Cubieboard hw/arm: Allwinner A10 enable SPL load from MMC tests/avocado: Add SD boot test to Cubieboard docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + include/hw/adc/npcm7xx_adc.h | 7 +- include/hw/arm/allwinner-a10.h | 27 ++ include/hw/arm/allwinner-h3.h | 3 + include/hw/arm/npcm7xx.h | 18 +- include/hw/arm/omap.h | 24 +- include/hw/arm/pxa.h | 11 +- include/hw/arm/stm32f405_soc.h | 5 +- include/hw/i2c/allwinner-i2c.h | 55 ++++ include/hw/i2c/npcm7xx_smbus.h | 7 +- include/hw/misc/allwinner-a10-ccm.h | 67 +++++ include/hw/misc/allwinner-a10-dramc.h | 68 +++++ include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +- include/hw/misc/npcm7xx_mft.h | 7 +- include/hw/misc/npcm7xx_pwm.h | 3 +- include/hw/misc/npcm7xx_rng.h | 6 +- include/hw/net/npcm7xx_emc.h | 5 +- include/hw/sd/npcm7xx_sdhci.h | 4 +- hw/arm/allwinner-a10.c | 40 +++ hw/arm/allwinner-h3.c | 11 +- hw/arm/bcm2836.c | 9 +- hw/arm/collie.c | 25 +- hw/arm/cubieboard.c | 11 + hw/arm/gumstix.c | 45 ++-- hw/arm/mainstone.c | 37 ++- hw/arm/musicpal.c | 9 +- hw/arm/olimex-stm32-h405.c | 69 +++++ hw/arm/omap1.c | 115 ++++---- hw/arm/omap2.c | 40 ++- hw/arm/omap_sx1.c | 53 ++-- hw/arm/palm.c | 2 +- hw/arm/pxa2xx.c | 8 +- hw/arm/spitz.c | 6 +- hw/arm/stellaris.c | 73 +++-- hw/arm/stm32f405_soc.c | 8 + hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 6 +- hw/arm/vexpress.c | 10 +- hw/arm/z2.c | 16 +- hw/char/omap_uart.c | 7 +- hw/display/omap_dss.c | 15 +- hw/display/omap_lcdc.c | 9 +- hw/dma/omap_dma.c | 15 +- hw/gpio/omap_gpio.c | 48 ++-- hw/i2c/allwinner-i2c.c | 459 ++++++++++++++++++++++++++++++++ hw/intc/omap_intc.c | 38 +-- hw/intc/xilinx_intc.c | 28 +- hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++ hw/misc/allwinner-a10-dramc.c | 179 +++++++++++++ hw/misc/axp209.c | 238 +++++++++++++++++ hw/misc/omap_gpmc.c | 12 +- hw/misc/omap_l4.c | 7 +- hw/misc/omap_sdrc.c | 7 +- hw/misc/omap_tap.c | 5 +- hw/misc/sbsa_ec.c | 12 +- hw/sd/omap_mmc.c | 9 +- hw/ssi/omap_spi.c | 7 +- hw/timer/omap_gptimer.c | 22 +- hw/timer/omap_synctimer.c | 4 +- hw/timer/xilinx_timer.c | 27 +- target/arm/helper.c | 3 + target/arm/sve_helper.c | 14 +- MAINTAINERS | 8 + hw/arm/Kconfig | 9 + hw/arm/meson.build | 1 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + hw/misc/Kconfig | 10 + hw/misc/meson.build | 3 + hw/misc/trace-events | 5 + tests/avocado/boot_linux_console.py | 47 ++++ 76 files changed, 1951 insertions(+), 455 deletions(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/arm/olimex-stm32-h405.c create mode 100644 hw/i2c/allwinner-i2c.c create mode 100644 hw/misc/allwinner-a10-ccm.c create mode 100644 hw/misc/allwinner-a10-dramc.c create mode 100644 hw/misc/axp209.c From: Felipe Balbi <balbi@kernel.org> STM32F405 has 128K of SRAM and another 64K of CCM (Core-coupled Memory) at a different base address. Correctly describe the memory layout to give existing FW images a chance to run unmodified. Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Message-id: 20221230145733.200496-2-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/stm32f405_soc.h | 5 ++++- hw/arm/stm32f405_soc.c | 8 ++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/stm32f405_soc.h b/include/hw/arm/stm32f405_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f405_soc.h +++ b/include/hw/arm/stm32f405_soc.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(STM32F405State, STM32F405_SOC) #define FLASH_BASE_ADDRESS 0x08000000 #define FLASH_SIZE (1024 * 1024) #define SRAM_BASE_ADDRESS 0x20000000 -#define SRAM_SIZE (192 * 1024) +#define SRAM_SIZE (128 * 1024) +#define CCM_BASE_ADDRESS 0x10000000 +#define CCM_SIZE (64 * 1024) struct STM32F405State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ struct STM32F405State { STM32F2XXADCState adc[STM_NUM_ADCS]; STM32F2XXSPIState spi[STM_NUM_SPIS]; + MemoryRegion ccm; MemoryRegion sram; MemoryRegion flash; MemoryRegion flash_alias; diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f405_soc_realize(DeviceState *dev_soc, Error **errp) } memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, &s->sram); + memory_region_init_ram(&s->ccm, NULL, "STM32F405.ccm", CCM_SIZE, + &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(system_memory, CCM_BASE_ADDRESS, &s->ccm); + armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 96); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); -- 2.34.1 From: Felipe Balbi <balbi@kernel.org> Olimex makes a series of low-cost STM32 boards. This commit introduces the minimum setup to support SMT32-H405. See [1] for details [1] https://www.olimex.com/Products/ARM/ST/STM32-H405/ Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20221230145733.200496-3-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + hw/arm/olimex-stm32-h405.c | 69 +++++++++++++++++++++++++ MAINTAINERS | 6 +++ hw/arm/Kconfig | 4 ++ hw/arm/meson.build | 1 + 6 files changed, 82 insertions(+) create mode 100644 hw/arm/olimex-stm32-h405.c diff --git a/docs/system/arm/stm32.rst b/docs/system/arm/stm32.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/stm32.rst +++ b/docs/system/arm/stm32.rst @@ -XXX,XX +XXX,XX @@ The STM32F4 series is based on ARM Cortex-M4F core. This series is pin-to-pin compatible with STM32F2 series. The following machines are based on this chip : - ``netduinoplus2`` Netduino Plus 2 board with STM32F405RGT6 microcontroller +- ``olimex-stm32-h405`` Olimex STM32 H405 board with STM32F405RGT6 microcontroller There are many other STM32 series that are currently not supported by QEMU. diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_COLLIE=y CONFIG_ASPEED_SOC=y CONFIG_NETDUINO2=y CONFIG_NETDUINOPLUS2=y +CONFIG_OLIMEX_STM32_H405=y CONFIG_MPS2=y CONFIG_RASPI=y CONFIG_DIGIC=y diff --git a/hw/arm/olimex-stm32-h405.c b/hw/arm/olimex-stm32-h405.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/olimex-stm32-h405.c @@ -XXX,XX +XXX,XX @@ +/* + * ST STM32VLDISCOVERY machine + * Olimex STM32-H405 machine + * + * Copyright (c) 2022 Felipe Balbi <balbi@kernel.org> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/boards.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-clock.h" +#include "qemu/error-report.h" +#include "hw/arm/stm32f405_soc.h" +#include "hw/arm/boot.h" + +/* olimex-stm32-h405 implementation is derived from netduinoplus2 */ + +/* Main SYSCLK frequency in Hz (168MHz) */ +#define SYSCLK_FRQ 168000000ULL + +static void olimex_stm32_h405_init(MachineState *machine) +{ + DeviceState *dev; + Clock *sysclk; + + /* This clock doesn't need migration because it is fixed-frequency */ + sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(sysclk, SYSCLK_FRQ); + + dev = qdev_new(TYPE_STM32F405_SOC); + qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m4")); + qdev_connect_clock_in(dev, "sysclk", sysclk); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), + machine->kernel_filename, + 0, FLASH_SIZE); +} + +static void olimex_stm32_h405_machine_init(MachineClass *mc) +{ + mc->desc = "Olimex STM32-H405 (Cortex-M4)"; + mc->init = olimex_stm32_h405_init; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4"); + + /* SRAM pre-allocated as part of the SoC instantiation */ + mc->default_ram_size = 0; +} + +DEFINE_MACHINE("olimex-stm32-h405", olimex_stm32_h405_machine_init) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Maintained F: hw/arm/netduinoplus2.c +Olimex STM32 H405 +M: Felipe Balbi <balbi@kernel.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/olimex-stm32-h405.c + SmartFusion2 M: Subbaraya Sundeep <sundeep.lkml@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config NETDUINOPLUS2 bool select STM32F405_SOC +config OLIMEX_STM32_H405 + bool + select STM32F405_SOC + config NSERIES bool select OMAP diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) +arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c')) arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c')) arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-ccm.h | 67 +++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 305 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 hw/misc/allwinner-a10-ccm.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/misc/allwinner-a10-ccm.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { /*< public >*/ ARMCPU cpu; + AwA10ClockCtlState ccm; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-ccm.h b/include/hw/misc/allwinner-a10-ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_CCM_H +#define HW_MISC_ALLWINNER_A10_CCM_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by CCM device */ +#define AW_A10_CCM_IOSIZE (0x400) + +/** Total number of known registers */ +#define AW_A10_CCM_REGS_NUM (AW_A10_CCM_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_CCM "allwinner-a10-ccm" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10ClockCtlState, AW_A10_CCM) + +/** @} */ + +/** + * Allwinner A10 CCM object instance state. + */ +struct AwA10ClockCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_CCM_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_H3_CCU_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #define AW_A10_MMC0_BASE 0x01c0f000 +#define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 #define AW_A10_PIT_REG_BASE 0x01c20c00 #define AW_A10_UART0_REG_BASE 0x01c28000 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "timer", &s->timer, TYPE_AW_A10_PIT); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a); create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB); + /* Clock Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-ccm.c b/hw/misc/allwinner-a10-ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-ccm.h" + +/* CCM register offsets */ +enum { + REG_PLL1_CFG = 0x0000, /* PLL1 Control */ + REG_PLL1_TUN = 0x0004, /* PLL1 Tuning */ + REG_PLL2_CFG = 0x0008, /* PLL2 Control */ + REG_PLL2_TUN = 0x000C, /* PLL2 Tuning */ + REG_PLL3_CFG = 0x0010, /* PLL3 Control */ + REG_PLL4_CFG = 0x0018, /* PLL4 Control */ + REG_PLL5_CFG = 0x0020, /* PLL5 Control */ + REG_PLL5_TUN = 0x0024, /* PLL5 Tuning */ + REG_PLL6_CFG = 0x0028, /* PLL6 Control */ + REG_PLL6_TUN = 0x002C, /* PLL6 Tuning */ + REG_PLL7_CFG = 0x0030, /* PLL7 Control */ + REG_PLL1_TUN2 = 0x0038, /* PLL1 Tuning2 */ + REG_PLL5_TUN2 = 0x003C, /* PLL5 Tuning2 */ + REG_PLL8_CFG = 0x0040, /* PLL8 Control */ + REG_OSC24M_CFG = 0x0050, /* OSC24M Control */ + REG_CPU_AHB_APB0_CFG = 0x0054, /* CPU, AHB and APB0 Divide Ratio */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* CCM register reset values */ +enum { + REG_PLL1_CFG_RST = 0x21005000, + REG_PLL1_TUN_RST = 0x0A101000, + REG_PLL2_CFG_RST = 0x08100010, + REG_PLL2_TUN_RST = 0x00000000, + REG_PLL3_CFG_RST = 0x0010D063, + REG_PLL4_CFG_RST = 0x21009911, + REG_PLL5_CFG_RST = 0x11049280, + REG_PLL5_TUN_RST = 0x14888000, + REG_PLL6_CFG_RST = 0x21009911, + REG_PLL6_TUN_RST = 0x00000000, + REG_PLL7_CFG_RST = 0x0010D063, + REG_PLL1_TUN2_RST = 0x00000000, + REG_PLL5_TUN2_RST = 0x00000000, + REG_PLL8_CFG_RST = 0x21009911, + REG_OSC24M_CFG_RST = 0x00138013, + REG_CPU_AHB_APB0_CFG_RST = 0x00010010, +}; + +static uint64_t allwinner_a10_ccm_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_ccm_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_ccm_ops = { + .read = allwinner_a10_ccm_read, + .write = allwinner_a10_ccm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_ccm_reset_enter(Object *obj, ResetType type) +{ + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_PLL1_CFG)] = REG_PLL1_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN)] = REG_PLL1_TUN_RST; + s->regs[REG_INDEX(REG_PLL2_CFG)] = REG_PLL2_CFG_RST; + s->regs[REG_INDEX(REG_PLL2_TUN)] = REG_PLL2_TUN_RST; + s->regs[REG_INDEX(REG_PLL3_CFG)] = REG_PLL3_CFG_RST; + s->regs[REG_INDEX(REG_PLL4_CFG)] = REG_PLL4_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_CFG)] = REG_PLL5_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_TUN)] = REG_PLL5_TUN_RST; + s->regs[REG_INDEX(REG_PLL6_CFG)] = REG_PLL6_CFG_RST; + s->regs[REG_INDEX(REG_PLL6_TUN)] = REG_PLL6_TUN_RST; + s->regs[REG_INDEX(REG_PLL7_CFG)] = REG_PLL7_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN2)] = REG_PLL1_TUN2_RST; + s->regs[REG_INDEX(REG_PLL5_TUN2)] = REG_PLL5_TUN2_RST; + s->regs[REG_INDEX(REG_PLL8_CFG)] = REG_PLL8_CFG_RST; + s->regs[REG_INDEX(REG_OSC24M_CFG)] = REG_OSC24M_CFG_RST; + s->regs[REG_INDEX(REG_CPU_AHB_APB0_CFG)] = REG_CPU_AHB_APB0_CFG_RST; +} + +static void allwinner_a10_ccm_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_ccm_ops, s, + TYPE_AW_A10_CCM, AW_A10_CCM_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_ccm_vmstate = { + .name = "allwinner-a10-ccm", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10ClockCtlState, AW_A10_CCM_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_ccm_reset_enter; + dc->vmsd = &allwinner_a10_ccm_vmstate; +} + +static const TypeInfo allwinner_a10_ccm_info = { + .name = TYPE_AW_A10_CCM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_ccm_init, + .instance_size = sizeof(AwA10ClockCtlState), + .class_init = allwinner_a10_ccm_class_init, +}; + +static void allwinner_a10_ccm_register(void) +{ + type_register_static(&allwinner_a10_ccm_info); +} + +type_init(allwinner_a10_ccm_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select AHCI select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC + select ALLWINNER_A10_CCM select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config VIRT_CTRL config LASI bool +config ALLWINNER_A10_CCM + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-dramc.h | 68 ++++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-dramc.c | 179 ++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 261 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/misc/allwinner-a10-dramc.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" +#include "hw/misc/allwinner-a10-dramc.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { ARMCPU cpu; AwA10ClockCtlState ccm; + AwA10DramControllerState dramc; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-dramc.h b/include/hw/misc/allwinner-a10-dramc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-dramc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_DRAMC_H +#define HW_MISC_ALLWINNER_A10_DRAMC_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "hw/register.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by DRAMC device */ +#define AW_A10_DRAMC_IOSIZE (0x1000) + +/** Total number of known registers */ +#define AW_A10_DRAMC_REGS_NUM (AW_A10_DRAMC_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_DRAMC "allwinner-a10-dramc" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10DramControllerState, AW_A10_DRAMC) + +/** @} */ + +/** + * Allwinner A10 DRAMC object instance state. + */ +struct AwA10DramControllerState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_DRAMC_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_A10_DRAMC_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "dramc", &s->dramc, TYPE_AW_A10_DRAMC); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* DRAM Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->dramc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 0, AW_A10_DRAMC_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-dramc.c b/hw/misc/allwinner-a10-dramc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-dramc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-dramc.h" + +/* DRAMC register offsets */ +enum { + REG_SDR_CCR = 0x0000, + REG_SDR_ZQCR0 = 0x00a8, + REG_SDR_ZQSR = 0x00b0 +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* DRAMC register flags */ +enum { + REG_SDR_CCR_DATA_TRAINING = (1 << 30), + REG_SDR_CCR_DRAM_INIT = (1 << 31), +}; +enum { + REG_SDR_ZQSR_ZCAL = (1 << 31), +}; + +/* DRAMC register reset values */ +enum { + REG_SDR_CCR_RESET = 0x80020000, + REG_SDR_ZQCR0_RESET = 0x07b00000, + REG_SDR_ZQSR_RESET = 0x80000000 +}; + +static uint64_t allwinner_a10_dramc_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + case REG_SDR_ZQCR0: + case REG_SDR_ZQSR: + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_dramc_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + if (val & REG_SDR_CCR_DRAM_INIT) { + /* Clear DRAM_INIT to indicate process is done. */ + val &= ~REG_SDR_CCR_DRAM_INIT; + } + if (val & REG_SDR_CCR_DATA_TRAINING) { + /* Clear DATA_TRAINING to indicate process is done. */ + val &= ~REG_SDR_CCR_DATA_TRAINING; + } + break; + case REG_SDR_ZQCR0: + /* Set ZCAL in ZQSR to indicate calibration is done. */ + s->regs[REG_INDEX(REG_SDR_ZQSR)] |= REG_SDR_ZQSR_ZCAL; + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_dramc_ops = { + .read = allwinner_a10_dramc_read, + .write = allwinner_a10_dramc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_dramc_reset_enter(Object *obj, ResetType type) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_SDR_CCR)] = REG_SDR_CCR_RESET; + s->regs[REG_INDEX(REG_SDR_ZQCR0)] = REG_SDR_ZQCR0_RESET; + s->regs[REG_INDEX(REG_SDR_ZQSR)] = REG_SDR_ZQSR_RESET; +} + +static void allwinner_a10_dramc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_dramc_ops, s, + TYPE_AW_A10_DRAMC, AW_A10_DRAMC_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_dramc_vmstate = { + .name = "allwinner-a10-dramc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10DramControllerState, + AW_A10_DRAMC_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_dramc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_dramc_reset_enter; + dc->vmsd = &allwinner_a10_dramc_vmstate; +} + +static const TypeInfo allwinner_a10_dramc_info = { + .name = TYPE_AW_A10_DRAMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_dramc_init, + .instance_size = sizeof(AwA10DramControllerState), + .class_init = allwinner_a10_dramc_class_init, +}; + +static void allwinner_a10_dramc_register(void) +{ + type_register_static(&allwinner_a10_dramc_info); +} + +type_init(allwinner_a10_dramc_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC select ALLWINNER_A10_CCM + select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config LASI config ALLWINNER_A10_CCM bool +config ALLWINNER_A10_DRAMC + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_DRAMC', if_true: files('allwinner-a10-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/i2c/allwinner-i2c.h | 55 ++++ hw/arm/allwinner-a10.c | 8 + hw/arm/allwinner-h3.c | 11 +- hw/i2c/allwinner-i2c.c | 459 +++++++++++++++++++++++++++++++++ hw/arm/Kconfig | 2 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + 12 files changed, 551 insertions(+), 1 deletion(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 hw/i2c/allwinner-i2c.c diff --git a/docs/system/arm/cubieboard.rst b/docs/system/arm/cubieboard.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cubieboard.rst +++ b/docs/system/arm/cubieboard.rst @@ -XXX,XX +XXX,XX @@ Emulated devices: - SDHCI - USB controller - SATA controller +- TWI (I2C) controller diff --git a/docs/system/arm/orangepi.rst b/docs/system/arm/orangepi.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/orangepi.rst +++ b/docs/system/arm/orangepi.rst @@ -XXX,XX +XXX,XX @@ The Orange Pi PC machine supports the following devices: * Clock Control Unit * System Control module * Security Identifier device + * TWI (I2C) Limitations """"""""""" diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { AwEmacState emac; AllwinnerAHCIState sata; AwSdHostState mmc0; + AWI2CState i2c0; AwRtcState rtc; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "sysemu/block-backend.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_DEV_UART2, AW_H3_DEV_UART3, AW_H3_DEV_EMAC, + AW_H3_DEV_TWI0, AW_H3_DEV_DRAMCOM, AW_H3_DEV_DRAMCTL, AW_H3_DEV_DRAMPHY, @@ -XXX,XX +XXX,XX @@ struct AwH3State { AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; + AWI2CState i2c0; AwSun8iEmacState emac; AwRtcState rtc; GICState gic; diff --git a/include/hw/i2c/allwinner-i2c.h b/include/hw/i2c/allwinner-i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/allwinner-i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface registers definition + * + * Copyright (C) 2022 Strahinja Jankovic. <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef ALLWINNER_I2C_H +#define ALLWINNER_I2C_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_AW_I2C "allwinner.i2c" +OBJECT_DECLARE_SIMPLE_TYPE(AWI2CState, AW_I2C) + +#define AW_I2C_MEM_SIZE 0x24 + +struct AWI2CState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + I2CBus *bus; + qemu_irq irq; + + uint8_t addr; + uint8_t xaddr; + uint8_t data; + uint8_t cntr; + uint8_t stat; + uint8_t ccr; + uint8_t srst; + uint8_t efr; + uint8_t lcr; +}; + +#endif /* ALLWINNER_I2C_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #define AW_A10_OHCI_BASE 0x01c14400 #define AW_A10_SATA_BASE 0x01c18000 #define AW_A10_RTC_BASE 0x01c20d00 +#define AW_A10_I2C0_BASE 0x01c2ac00 static void aw_a10_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); + object_initialize_child(obj, "i2c0", &s->i2c0, TYPE_AW_I2C); + if (machine_usb(current_machine)) { int i; @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) /* RTC */ sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->rtc), 0, AW_A10_RTC_BASE, 10); + + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, AW_A10_I2C0_BASE); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, qdev_get_gpio_in(dev, 7)); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_DEV_UART1] = 0x01c28400, [AW_H3_DEV_UART2] = 0x01c28800, [AW_H3_DEV_UART3] = 0x01c28c00, + [AW_H3_DEV_TWI0] = 0x01c2ac00, [AW_H3_DEV_EMAC] = 0x01c30000, [AW_H3_DEV_DRAMCOM] = 0x01c62000, [AW_H3_DEV_DRAMCTL] = 0x01c63000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "uart1", 0x01c28400, 1 * KiB }, { "uart2", 0x01c28800, 1 * KiB }, { "uart3", 0x01c28c00, 1 * KiB }, - { "twi0", 0x01c2ac00, 1 * KiB }, { "twi1", 0x01c2b000, 1 * KiB }, { "twi2", 0x01c2b400, 1 * KiB }, { "scr", 0x01c2c400, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART1 = 1, AW_H3_GIC_SPI_UART2 = 2, AW_H3_GIC_SPI_UART3 = 3, + AW_H3_GIC_SPI_TWI0 = 6, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, AW_H3_GIC_SPI_MMC0 = 60, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "ram-size"); object_initialize_child(obj, "rtc", &s->rtc, TYPE_AW_RTC_SUN6I); + + object_initialize_child(obj, "twi0", &s->i2c0, TYPE_AW_I2C); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, s->memmap[AW_H3_DEV_RTC]); + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, s->memmap[AW_H3_DEV_TWI0]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TWI0)); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "hw/i2c/allwinner-i2c.h" +#include "hw/irq.h" +#include "migration/vmstate.h" +#include "hw/i2c/i2c.h" +#include "qemu/log.h" +#include "trace.h" +#include "qemu/module.h" + +/* Allwinner I2C memory map */ +#define TWI_ADDR_REG 0x00 /* slave address register */ +#define TWI_XADDR_REG 0x04 /* extended slave address register */ +#define TWI_DATA_REG 0x08 /* data register */ +#define TWI_CNTR_REG 0x0c /* control register */ +#define TWI_STAT_REG 0x10 /* status register */ +#define TWI_CCR_REG 0x14 /* clock control register */ +#define TWI_SRST_REG 0x18 /* software reset register */ +#define TWI_EFR_REG 0x1c /* enhance feature register */ +#define TWI_LCR_REG 0x20 /* line control register */ + +/* Used only in slave mode, do not set */ +#define TWI_ADDR_RESET 0 +#define TWI_XADDR_RESET 0 + +/* Data register */ +#define TWI_DATA_MASK 0xFF +#define TWI_DATA_RESET 0 + +/* Control register */ +#define TWI_CNTR_INT_EN (1 << 7) +#define TWI_CNTR_BUS_EN (1 << 6) +#define TWI_CNTR_M_STA (1 << 5) +#define TWI_CNTR_M_STP (1 << 4) +#define TWI_CNTR_INT_FLAG (1 << 3) +#define TWI_CNTR_A_ACK (1 << 2) +#define TWI_CNTR_MASK 0xFC +#define TWI_CNTR_RESET 0 + +/* Status register */ +#define TWI_STAT_MASK 0xF8 +#define TWI_STAT_RESET 0xF8 + +/* Clock register */ +#define TWI_CCR_CLK_M_MASK 0x78 +#define TWI_CCR_CLK_N_MASK 0x07 +#define TWI_CCR_MASK 0x7F +#define TWI_CCR_RESET 0 + +/* Soft reset */ +#define TWI_SRST_MASK 0x01 +#define TWI_SRST_RESET 0 + +/* Enhance feature */ +#define TWI_EFR_MASK 0x03 +#define TWI_EFR_RESET 0 + +/* Line control */ +#define TWI_LCR_SCL_STATE (1 << 5) +#define TWI_LCR_SDA_STATE (1 << 4) +#define TWI_LCR_SCL_CTL (1 << 3) +#define TWI_LCR_SCL_CTL_EN (1 << 2) +#define TWI_LCR_SDA_CTL (1 << 1) +#define TWI_LCR_SDA_CTL_EN (1 << 0) +#define TWI_LCR_MASK 0x3F +#define TWI_LCR_RESET 0x3A + +/* Status value in STAT register is shifted by 3 bits */ +#define TWI_STAT_SHIFT 3 +#define STAT_FROM_STA(x) ((x) << TWI_STAT_SHIFT) +#define STAT_TO_STA(x) ((x) >> TWI_STAT_SHIFT) + +enum { + STAT_BUS_ERROR = 0, + /* Master mode */ + STAT_M_STA_TX, + STAT_M_RSTA_TX, + STAT_M_ADDR_WR_ACK, + STAT_M_ADDR_WR_NACK, + STAT_M_DATA_TX_ACK, + STAT_M_DATA_TX_NACK, + STAT_M_ARB_LOST, + STAT_M_ADDR_RD_ACK, + STAT_M_ADDR_RD_NACK, + STAT_M_DATA_RX_ACK, + STAT_M_DATA_RX_NACK, + /* Slave mode */ + STAT_S_ADDR_WR_ACK, + STAT_S_ARB_LOST_AW_ACK, + STAT_S_GCA_ACK, + STAT_S_ARB_LOST_GCA_ACK, + STAT_S_DATA_RX_SA_ACK, + STAT_S_DATA_RX_SA_NACK, + STAT_S_DATA_RX_GCA_ACK, + STAT_S_DATA_RX_GCA_NACK, + STAT_S_STP_RSTA, + STAT_S_ADDR_RD_ACK, + STAT_S_ARB_LOST_AR_ACK, + STAT_S_DATA_TX_ACK, + STAT_S_DATA_TX_NACK, + STAT_S_LB_TX_ACK, + /* Master mode, 10-bit */ + STAT_M_2ND_ADDR_WR_ACK, + STAT_M_2ND_ADDR_WR_NACK, + /* Idle */ + STAT_IDLE = 0x1f +} TWI_STAT_STA; + +static const char *allwinner_i2c_get_regname(unsigned offset) +{ + switch (offset) { + case TWI_ADDR_REG: + return "ADDR"; + case TWI_XADDR_REG: + return "XADDR"; + case TWI_DATA_REG: + return "DATA"; + case TWI_CNTR_REG: + return "CNTR"; + case TWI_STAT_REG: + return "STAT"; + case TWI_CCR_REG: + return "CCR"; + case TWI_SRST_REG: + return "SRST"; + case TWI_EFR_REG: + return "EFR"; + case TWI_LCR_REG: + return "LCR"; + default: + return "[?]"; + } +} + +static inline bool allwinner_i2c_is_reset(AWI2CState *s) +{ + return s->srst & TWI_SRST_MASK; +} + +static inline bool allwinner_i2c_bus_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_BUS_EN; +} + +static inline bool allwinner_i2c_interrupt_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_INT_EN; +} + +static void allwinner_i2c_reset_hold(Object *obj) +{ + AWI2CState *s = AW_I2C(obj); + + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + i2c_end_transfer(s->bus); + } + + s->addr = TWI_ADDR_RESET; + s->xaddr = TWI_XADDR_RESET; + s->data = TWI_DATA_RESET; + s->cntr = TWI_CNTR_RESET; + s->stat = TWI_STAT_RESET; + s->ccr = TWI_CCR_RESET; + s->srst = TWI_SRST_RESET; + s->efr = TWI_EFR_RESET; + s->lcr = TWI_LCR_RESET; +} + +static inline void allwinner_i2c_raise_interrupt(AWI2CState *s) +{ + /* + * Raise an interrupt if the device is not reset and it is configured + * to generate some interrupts. + */ + if (!allwinner_i2c_is_reset(s) && allwinner_i2c_bus_is_enabled(s)) { + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + s->cntr |= TWI_CNTR_INT_FLAG; + if (allwinner_i2c_interrupt_is_enabled(s)) { + qemu_irq_raise(s->irq); + } + } + } +} + +static uint64_t allwinner_i2c_read(void *opaque, hwaddr offset, + unsigned size) +{ + uint16_t value; + AWI2CState *s = AW_I2C(opaque); + + switch (offset) { + case TWI_ADDR_REG: + value = s->addr; + break; + case TWI_XADDR_REG: + value = s->xaddr; + break; + case TWI_DATA_REG: + if ((STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK)) { + /* Get the next byte */ + s->data = i2c_recv(s->bus); + + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + value = s->data; + break; + case TWI_CNTR_REG: + value = s->cntr; + break; + case TWI_STAT_REG: + value = s->stat; + /* + * If polling when reading then change state to indicate data + * is available + */ + if (STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) { + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case TWI_CCR_REG: + value = s->ccr; + break; + case TWI_SRST_REG: + value = s->srst; + break; + case TWI_EFR_REG: + value = s->efr; + break; + case TWI_LCR_REG: + value = s->lcr; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + value = 0; + break; + } + + trace_allwinner_i2c_read(allwinner_i2c_get_regname(offset), offset, value); + + return (uint64_t)value; +} + +static void allwinner_i2c_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AWI2CState *s = AW_I2C(opaque); + + value &= 0xff; + + trace_allwinner_i2c_write(allwinner_i2c_get_regname(offset), offset, value); + + switch (offset) { + case TWI_ADDR_REG: + s->addr = (uint8_t)value; + break; + case TWI_XADDR_REG: + s->xaddr = (uint8_t)value; + break; + case TWI_DATA_REG: + /* If the device is in reset or not enabled, nothing to do */ + if (allwinner_i2c_is_reset(s) || (!allwinner_i2c_bus_is_enabled(s))) { + break; + } + + s->data = value & TWI_DATA_MASK; + + switch (STAT_TO_STA(s->stat)) { + case STAT_M_STA_TX: + case STAT_M_RSTA_TX: + /* Send address */ + if (i2c_start_transfer(s->bus, extract32(s->data, 1, 7), + extract32(s->data, 0, 1))) { + /* If non zero is returned, the address is not valid */ + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_NACK); + } else { + /* Determine if read of write */ + if (extract32(s->data, 0, 1)) { + s->stat = STAT_FROM_STA(STAT_M_ADDR_RD_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_ACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case STAT_M_ADDR_WR_ACK: + case STAT_M_DATA_TX_ACK: + if (i2c_send(s->bus, s->data)) { + /* If the target return non zero then end the transfer */ + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_NACK); + i2c_end_transfer(s->bus); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_ACK); + allwinner_i2c_raise_interrupt(s); + } + break; + default: + break; + } + break; + case TWI_CNTR_REG: + if (!allwinner_i2c_is_reset(s)) { + /* Do something only if not in software reset */ + s->cntr = value & TWI_CNTR_MASK; + + /* Check if start condition should be sent */ + if (s->cntr & TWI_CNTR_M_STA) { + /* Update status */ + if (STAT_TO_STA(s->stat) == STAT_IDLE) { + /* Send start condition */ + s->stat = STAT_FROM_STA(STAT_M_STA_TX); + } else { + /* Send repeated start condition */ + s->stat = STAT_FROM_STA(STAT_M_RSTA_TX); + } + /* Clear start condition */ + s->cntr &= ~TWI_CNTR_M_STA; + } + if (s->cntr & TWI_CNTR_M_STP) { + /* Update status */ + i2c_end_transfer(s->bus); + s->stat = STAT_FROM_STA(STAT_IDLE); + s->cntr &= ~TWI_CNTR_M_STP; + } + if ((s->cntr & TWI_CNTR_INT_FLAG) == 0) { + /* Interrupt flag cleared */ + qemu_irq_lower(s->irq); + } + if ((s->cntr & TWI_CNTR_A_ACK) == 0) { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + } else { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } + } + allwinner_i2c_raise_interrupt(s); + + } + break; + case TWI_CCR_REG: + s->ccr = value & TWI_CCR_MASK; + break; + case TWI_SRST_REG: + if (((value & TWI_SRST_MASK) == 0) && (s->srst & TWI_SRST_MASK)) { + /* Perform reset */ + allwinner_i2c_reset_hold(OBJECT(s)); + } + s->srst = value & TWI_SRST_MASK; + break; + case TWI_EFR_REG: + s->efr = value & TWI_EFR_MASK; + break; + case TWI_LCR_REG: + s->lcr = value & TWI_LCR_MASK; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + break; + } +} + +static const MemoryRegionOps allwinner_i2c_ops = { + .read = allwinner_i2c_read, + .write = allwinner_i2c_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription allwinner_i2c_vmstate = { + .name = TYPE_AW_I2C, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8(addr, AWI2CState), + VMSTATE_UINT8(xaddr, AWI2CState), + VMSTATE_UINT8(data, AWI2CState), + VMSTATE_UINT8(cntr, AWI2CState), + VMSTATE_UINT8(ccr, AWI2CState), + VMSTATE_UINT8(srst, AWI2CState), + VMSTATE_UINT8(efr, AWI2CState), + VMSTATE_UINT8(lcr, AWI2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_i2c_realize(DeviceState *dev, Error **errp) +{ + AWI2CState *s = AW_I2C(dev); + + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_i2c_ops, s, + TYPE_AW_I2C, AW_I2C_MEM_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->bus = i2c_init_bus(dev, "i2c"); +} + +static void allwinner_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = allwinner_i2c_reset_hold; + dc->vmsd = &allwinner_i2c_vmstate; + dc->realize = allwinner_i2c_realize; + dc->desc = "Allwinner I2C Controller"; +} + +static const TypeInfo allwinner_i2c_type_info = { + .name = TYPE_AW_I2C, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AWI2CState), + .class_init = allwinner_i2c_class_init, +}; + +static void allwinner_i2c_register_types(void) +{ + type_register_static(&allwinner_i2c_type_info); +} + +type_init(allwinner_i2c_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_CCM select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC + select ALLWINNER_I2C select SERIAL select UNIMP @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 bool select ALLWINNER_A10_PIT select ALLWINNER_SUN8I_EMAC + select ALLWINNER_I2C select SERIAL select ARM_TIMER select ARM_GIC diff --git a/hw/i2c/Kconfig b/hw/i2c/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/Kconfig +++ b/hw/i2c/Kconfig @@ -XXX,XX +XXX,XX @@ config MPC_I2C bool select I2C +config ALLWINNER_I2C + bool + select I2C + config PCA954X bool select I2C diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/meson.build +++ b/hw/i2c/meson.build @@ -XXX,XX +XXX,XX @@ i2c_ss.add(when: 'CONFIG_BITBANG_I2C', if_true: files('bitbang_i2c.c')) i2c_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_i2c.c')) i2c_ss.add(when: 'CONFIG_IMX_I2C', if_true: files('imx_i2c.c')) i2c_ss.add(when: 'CONFIG_MPC_I2C', if_true: files('mpc_i2c.c')) +i2c_ss.add(when: 'CONFIG_ALLWINNER_I2C', if_true: files('allwinner-i2c.c')) i2c_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('microbit_i2c.c')) i2c_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_smbus.c')) i2c_ss.add(when: 'CONFIG_SMBUS_EEPROM', if_true: files('smbus_eeprom.c')) diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ i2c_send_async(uint8_t address, uint8_t data) "send_async(addr:0x%02x) data:0x%0 i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x" i2c_ack(void) "" +# allwinner_i2c.c + +allwinner_i2c_read(const char* reg_name, uint64_t offset, uint64_t value) "read %s [0x%" PRIx64 "]: -> 0x%" PRIx64 +allwinner_i2c_write(const char* reg_name, uint64_t offset, uint64_t value) "write %s [0x%" PRIx64 "]: <- 0x%" PRIx64 + # aspeed_i2c.c aspeed_i2c_bus_cmd(uint32_t cmd, const char *cmd_flags, uint32_t count, uint32_t intr_status) "handling cmd=0x%x %s count=%d intr=0x%x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch adds minimal support for AXP-209 PMU. Most important is chip ID since U-Boot SPL expects version 0x1. Besides the chip ID register, reset values for two more registers used by A10 U-Boot SPL are covered. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/axp209.c | 238 +++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 2 + hw/misc/Kconfig | 4 + hw/misc/meson.build | 1 + hw/misc/trace-events | 5 + 5 files changed, 250 insertions(+) create mode 100644 hw/misc/axp209.c diff --git a/hw/misc/axp209.c b/hw/misc/axp209.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/axp209.c @@ -XXX,XX +XXX,XX @@ +/* + * AXP-209 PMU Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "trace.h" +#include "hw/i2c/i2c.h" +#include "migration/vmstate.h" + +#define TYPE_AXP209_PMU "axp209_pmu" + +#define AXP209(obj) \ + OBJECT_CHECK(AXP209I2CState, (obj), TYPE_AXP209_PMU) + +/* registers */ +enum { + REG_POWER_STATUS = 0x0u, + REG_OPERATING_MODE, + REG_OTG_VBUS_STATUS, + REG_CHIP_VERSION, + REG_DATA_CACHE_0, + REG_DATA_CACHE_1, + REG_DATA_CACHE_2, + REG_DATA_CACHE_3, + REG_DATA_CACHE_4, + REG_DATA_CACHE_5, + REG_DATA_CACHE_6, + REG_DATA_CACHE_7, + REG_DATA_CACHE_8, + REG_DATA_CACHE_9, + REG_DATA_CACHE_A, + REG_DATA_CACHE_B, + REG_POWER_OUTPUT_CTRL = 0x12u, + REG_DC_DC2_OUT_V_CTRL = 0x23u, + REG_DC_DC2_DVS_CTRL = 0x25u, + REG_DC_DC3_OUT_V_CTRL = 0x27u, + REG_LDO2_4_OUT_V_CTRL, + REG_LDO3_OUT_V_CTRL, + REG_VBUS_CH_MGMT = 0x30u, + REG_SHUTDOWN_V_CTRL, + REG_SHUTDOWN_CTRL, + REG_CHARGE_CTRL_1, + REG_CHARGE_CTRL_2, + REG_SPARE_CHARGE_CTRL, + REG_PEK_KEY_CTRL, + REG_DC_DC_FREQ_SET, + REG_CHR_TEMP_TH_SET, + REG_CHR_HIGH_TEMP_TH_CTRL, + REG_IPSOUT_WARN_L1, + REG_IPSOUT_WARN_L2, + REG_DISCHR_TEMP_TH_SET, + REG_DISCHR_HIGH_TEMP_TH_CTRL, + REG_IRQ_BANK_1_CTRL = 0x40u, + REG_IRQ_BANK_2_CTRL, + REG_IRQ_BANK_3_CTRL, + REG_IRQ_BANK_4_CTRL, + REG_IRQ_BANK_5_CTRL, + REG_IRQ_BANK_1_STAT = 0x48u, + REG_IRQ_BANK_2_STAT, + REG_IRQ_BANK_3_STAT, + REG_IRQ_BANK_4_STAT, + REG_IRQ_BANK_5_STAT, + REG_ADC_ACIN_V_H = 0x56u, + REG_ADC_ACIN_V_L, + REG_ADC_ACIN_CURR_H, + REG_ADC_ACIN_CURR_L, + REG_ADC_VBUS_V_H, + REG_ADC_VBUS_V_L, + REG_ADC_VBUS_CURR_H, + REG_ADC_VBUS_CURR_L, + REG_ADC_INT_TEMP_H, + REG_ADC_INT_TEMP_L, + REG_ADC_TEMP_SENS_V_H = 0x62u, + REG_ADC_TEMP_SENS_V_L, + REG_ADC_BAT_V_H = 0x78u, + REG_ADC_BAT_V_L, + REG_ADC_BAT_DISCHR_CURR_H, + REG_ADC_BAT_DISCHR_CURR_L, + REG_ADC_BAT_CHR_CURR_H, + REG_ADC_BAT_CHR_CURR_L, + REG_ADC_IPSOUT_V_H, + REG_ADC_IPSOUT_V_L, + REG_DC_DC_MOD_SEL = 0x80u, + REG_ADC_EN_1, + REG_ADC_EN_2, + REG_ADC_SR_CTRL, + REG_ADC_IN_RANGE, + REG_GPIO1_ADC_IRQ_RISING_TH, + REG_GPIO1_ADC_IRQ_FALLING_TH, + REG_TIMER_CTRL = 0x8au, + REG_VBUS_CTRL_MON_SRP, + REG_OVER_TEMP_SHUTDOWN = 0x8fu, + REG_GPIO0_FEAT_SET, + REG_GPIO_OUT_HIGH_SET, + REG_GPIO1_FEAT_SET, + REG_GPIO2_FEAT_SET, + REG_GPIO_SIG_STATE_SET_MON, + REG_GPIO3_SET, + REG_COULOMB_CNTR_CTRL = 0xb8u, + REG_POWER_MEAS_RES, + NR_REGS +}; + +#define AXP209_CHIP_VERSION_ID (0x01) +#define AXP209_DC_DC2_OUT_V_CTRL_RESET (0x16) +#define AXP209_IRQ_BANK_1_CTRL_RESET (0xd8) + +/* A simple I2C slave which returns values of ID or CNT register. */ +typedef struct AXP209I2CState { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + uint8_t regs[NR_REGS]; /* peripheral registers */ + uint8_t ptr; /* current register index */ + uint8_t count; /* counter used for tx/rx */ +} AXP209I2CState; + +/* Reset all counters and load ID register */ +static void axp209_reset_enter(Object *obj, ResetType type) +{ + AXP209I2CState *s = AXP209(obj); + + memset(s->regs, 0, NR_REGS); + s->ptr = 0; + s->count = 0; + s->regs[REG_CHIP_VERSION] = AXP209_CHIP_VERSION_ID; + s->regs[REG_DC_DC2_OUT_V_CTRL] = AXP209_DC_DC2_OUT_V_CTRL_RESET; + s->regs[REG_IRQ_BANK_1_CTRL] = AXP209_IRQ_BANK_1_CTRL_RESET; +} + +/* Handle events from master. */ +static int axp209_event(I2CSlave *i2c, enum i2c_event event) +{ + AXP209I2CState *s = AXP209(i2c); + + s->count = 0; + + return 0; +} + +/* Called when master requests read */ +static uint8_t axp209_rx(I2CSlave *i2c) +{ + AXP209I2CState *s = AXP209(i2c); + uint8_t ret = 0xff; + + if (s->ptr < NR_REGS) { + ret = s->regs[s->ptr++]; + } + + trace_axp209_rx(s->ptr - 1, ret); + + return ret; +} + +/* + * Called when master sends write. + * Update ptr with byte 0, then perform write with second byte. + */ +static int axp209_tx(I2CSlave *i2c, uint8_t data) +{ + AXP209I2CState *s = AXP209(i2c); + + if (s->count == 0) { + /* Store register address */ + s->ptr = data; + s->count++; + trace_axp209_select(data); + } else { + trace_axp209_tx(s->ptr, data); + if (s->ptr == REG_DC_DC2_OUT_V_CTRL) { + s->regs[s->ptr++] = data; + } + } + + return 0; +} + +static const VMStateDescription vmstate_axp209 = { + .name = TYPE_AXP209_PMU, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(regs, AXP209I2CState, NR_REGS), + VMSTATE_UINT8(count, AXP209I2CState), + VMSTATE_UINT8(ptr, AXP209I2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void axp209_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc); + ResettableClass *rc = RESETTABLE_CLASS(oc); + + rc->phases.enter = axp209_reset_enter; + dc->vmsd = &vmstate_axp209; + isc->event = axp209_event; + isc->recv = axp209_rx; + isc->send = axp209_tx; +} + +static const TypeInfo axp209_info = { + .name = TYPE_AXP209_PMU, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(AXP209I2CState), + .class_init = axp209_class_init +}; + +static void axp209_register_devices(void) +{ + type_register_static(&axp209_info); +} + +type_init(axp209_register_devices); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ ARM Machines Allwinner-a10 M: Beniamino Galvani <b.galvani@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> +R: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/*/allwinner* F: include/hw/*/allwinner* F: hw/arm/cubieboard.c F: docs/system/arm/cubieboard.rst +F: hw/misc/axp209.c Allwinner-h3 M: Niek Linnenbank <nieklinnenbank@gmail.com> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10_CCM config ALLWINNER_A10_DRAMC bool +config AXP209_PMU + bool + depends on I2C + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c' softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-sysctrl.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sid.c')) +softmmu_ss.add(when: 'CONFIG_AXP209_PMU', if_true: files('axp209.c')) softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('arm_sysctl.c')) softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c')) softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true: files('eccmemctl.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" avr_power_read(uint8_t value) "power_reduc read value:%u" avr_power_write(uint8_t value) "power_reduc write value:%u" +# axp209.c +axp209_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " : 0x%" PRIx8 +axp209_select(uint8_t reg) "Accessing reg 0x%" PRIx8 +axp209_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " : 0x%" PRIx8 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> SPL Boot for Cubieboard expects AXP209 connected to I2C0 bus. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221226220303.14420-6-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 6 ++++++ hw/arm/Kconfig | 1 + 2 files changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/qdev-properties.h" #include "hw/arm/allwinner-a10.h" +#include "hw/i2c/i2c.h" static struct arm_boot_info cubieboard_binfo = { .loader_start = AW_A10_SDRAM_BASE, @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) BlockBackend *blk; BusState *bus; DeviceState *carddev; + I2CBus *i2c; /* BIOS is not supported by this board */ if (machine->firmware) { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) exit(1); } + /* Connect AXP 209 */ + i2c = I2C_BUS(qdev_get_child_bus(DEVICE(&a10->i2c0), "i2c")); + i2c_slave_create_simple(i2c, "axp209_pmu", 0x34); + /* Retrieve SD bus */ di = drive_get(IF_SD, 0, 0); blk = di ? blk_by_legacy_dinfo(di) : NULL; diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select ALLWINNER_I2C + select AXP209_PMU select SERIAL select UNIMP -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch enables copying of SPL from MMC if `-kernel` parameter is not passed when starting QEMU. SPL is copied to SRAM_A. The approach is reused from Allwinner H3 implementation. Tested with Armbian and custom Yocto image. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-7-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 21 +++++++++++++++++++++ hw/arm/allwinner-a10.c | 18 ++++++++++++++++++ hw/arm/cubieboard.c | 5 +++++ 3 files changed, 44 insertions(+) diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" #include "hw/i2c/allwinner-i2c.h" +#include "sysemu/block-backend.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { OHCISysBusState ohci[AW_A10_NUM_USB]; }; +/** + * Emulate Boot ROM firmware setup functionality. + * + * A real Allwinner A10 SoC contains a Boot ROM + * which is the first code that runs right after + * the SoC is powered on. The Boot ROM is responsible + * for loading user code (e.g. a bootloader) from any + * of the supported external devices and writing the + * downloaded code to internal SRAM. After loading the SoC + * begins executing the code written to SRAM. + * + * This function emulates the Boot ROM by copying 32 KiB + * of data at offset 8 KiB from the given block device and writes it to + * the start of the first internal SRAM memory. + * + * @s: Allwinner A10 state object pointer + * @blk: Block backend device object pointer + */ +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk); + #endif diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#include "hw/loader.h" +#define AW_A10_SRAM_A_BASE 0x00000000 #define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 @@ -XXX,XX +XXX,XX @@ #define AW_A10_RTC_BASE 0x01c20d00 #define AW_A10_I2C0_BASE 0x01c2ac00 +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk) +{ + const int64_t rom_size = 32 * KiB; + g_autofree uint8_t *buffer = g_new0(uint8_t, rom_size); + + if (blk_pread(blk, 8 * KiB, rom_size, buffer, 0) < 0) { + error_setg(&error_fatal, "%s: failed to read BlockBackend data", + __func__); + return; + } + + rom_add_blob("allwinner-a10.bootrom", buffer, rom_size, + rom_size, AW_A10_SRAM_A_BASE, + NULL, NULL, NULL, NULL, false); +} + static void aw_a10_init(Object *obj) { AwA10State *s = AW_A10(obj); diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), AW_A10_SDRAM_BASE, machine->ram); + /* Load target kernel or start using BootROM */ + if (!machine->kernel_filename && blk && blk_is_available(blk)) { + /* Use Boot ROM to copy data from SD card to SRAM */ + allwinner_a10_bootrom_setup(a10, blk); + } /* TODO create and connect IDE devices for ide_drive_get() */ cubieboard_binfo.ram_size = machine->ram_size; -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> Cubieboard now can boot directly from SD card, without the need to pass `-kernel` parameter. Update Avocado tests to cover this functionality. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-8-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_cubieboard_sata(self): 'sda') # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + def test_arm_cubieboard_openwrt_22_03_2(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:cubieboard + :avocado: tags=device:sd + """ + + # This test download a 7.5 MiB compressed image and expand it + # to 126 MiB. + image_url = ('https://downloads.openwrt.org/releases/22.03.2/targets/' + 'sunxi/cortexa8/openwrt-22.03.2-sunxi-cortexa8-' + 'cubietech_a10-cubieboard-ext4-sdcard.img.gz') + image_hash = ('94b5ecbfbc0b3b56276e5146b899eafa' + '2ac5dc2d08733d6705af9f144f39f554') + image_path_gz = self.fetch_asset(image_url, asset_hash=image_hash, + algorithm='sha256') + image_path = archive.extract(image_path_gz, self.workdir) + image_pow2ceil_expand(image_path) + + self.vm.set_console() + self.vm.add_args('-drive', 'file=' + image_path + ',if=sd,format=raw', + '-nic', 'user', + '-no-reboot') + self.vm.launch() + + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'usbcore.nousb ' + 'noreboot') + + self.wait_for_console_pattern('U-Boot SPL') + + interrupt_interactive_console_until_pattern( + self, 'Hit any key to stop autoboot:', '=>') + exec_command_and_wait_for_pattern(self, "setenv extraargs '" + + kernel_command_line + "'", '=>') + exec_command_and_wait_for_pattern(self, 'boot', 'Starting kernel ...'); + + self.wait_for_console_pattern( + 'Please press Enter to activate this console.') + + exec_command_and_wait_for_pattern(self, ' ', 'root@') + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun4i/sun5i') + # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_TIMEOUT_EXPECTED'), 'Test might timeout') def test_arm_quanta_gsj(self): """ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Don't dereference CPUTLBEntryFull until we verify that the page is valid. Move the other user-only info field updates after the valid check to match. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1412 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230104190056.305143-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, #ifdef CONFIG_USER_ONLY flags = probe_access_flags(env, addr, access_type, mmu_idx, nofault, &info->host, retaddr); - memset(&info->attrs, 0, sizeof(info->attrs)); - /* Require both ANON and MTE; see allocation_tag_mem(). */ - info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); #else CPUTLBEntryFull *full; flags = probe_access_full(env, addr, access_type, mmu_idx, nofault, &info->host, &full, retaddr); - info->attrs = full->attrs; - info->tagged = full->pte_attrs == 0xf0; #endif info->flags = flags; @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, return false; } +#ifdef CONFIG_USER_ONLY + memset(&info->attrs, 0, sizeof(info->attrs)); + /* Require both ANON and MTE; see allocation_tag_mem(). */ + info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); +#else + info->attrs = full->attrs; + info->tagged = full->pte_attrs == 0xf0; +#endif + /* Ensure that info->host[] is relative to addr, not addr + mem_off. */ info->host -= mem_off; return true; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa255_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 2 +- hw/arm/gumstix.c | 3 +-- hw/arm/pxa2xx.c | 4 +++- hw/arm/tosa.c | 2 +- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, const char *revision); -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size); +PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; uint32_t connex_ram = 0x04000000; - cpu = pxa255_init(address_space_mem, connex_ram); + cpu = pxa255_init(connex_ram); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qemu/module.h" #include "qapi/error.h" +#include "exec/address-spaces.h" #include "cpu.h" #include "hw/sysbus.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ PXA2xxState *pxa270_init(MemoryRegion *address_space, } /* Initialise a PXA255 integrated chip (ARM based core). */ -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size) +PXA2xxState *pxa255_init(unsigned int sdram_size) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ static void tosa_init(MachineState *machine) TC6393xbState *tmio; DeviceState *scp0, *scp1; - mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size); + mpu = pxa255_init(tosa_binfo.ram_size); memory_region_init_rom(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal); memory_region_add_subregion(address_space_mem, 0, rom); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa270_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 3 +-- hw/arm/gumstix.c | 3 +-- hw/arm/mainstone.c | 10 ++++------ hw/arm/pxa2xx.c | 4 ++-- hw/arm/spitz.c | 6 ++---- hw/arm/z2.c | 3 +-- 6 files changed, 11 insertions(+), 18 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { # define PA_FMT "0x%08lx" -PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, - const char *revision); +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *revision); PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; uint32_t verdex_ram = 0x10000000; - cpu = pxa270_init(address_space_mem, verdex_ram, machine->cpu_type); + cpu = pxa270_init(verdex_ram, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info mainstone_binfo = { .ram_size = 0x04000000, }; -static void mainstone_common_init(MemoryRegion *address_space_mem, - MachineState *machine, +static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { uint32_t sector_len = 256 * 1024; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0x00000000, rom); /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, static void mainstone_init(MachineState *machine) { - mainstone_common_init(get_system_memory(), machine, mainstone, 0x196); + mainstone_common_init(machine, mainstone, 0x196); } static void mainstone2_machine_init(MachineClass *mc) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_reset(void *opaque, int line, int level) } /* Initialise a PXA270 integrated chip (ARM based core). */ -PXA2xxState *pxa270_init(MemoryRegion *address_space, - unsigned int sdram_size, const char *cpu_type) +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *cpu_type) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; - MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(spitz_binfo.ram_size, machine->cpu_type); sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); memory_region_init_rom(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0, rom); /* Setup peripherals */ spitz_keyboard_register(mpu); diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { static void z2_init(MachineState *machine) { - MemoryRegion *address_space_mem = get_system_memory(); uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) DeviceState *wm; /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); + mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "qom/object.h" +#define RAM_SIZE (512 * MiB) +#define FLASH_SIZE (32 * MiB) +#define FLASH_SECTOR_SIZE (64 * KiB) + struct CollieMachineState { MachineState parent; @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CollieMachineState, COLLIE_MACHINE) static struct arm_boot_info collie_binfo = { .loader_start = SA_SDCS0, - .ram_size = 0x20000000, + .ram_size = RAM_SIZE, }; static void collie_init(MachineState *machine) @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", 0x02000000, + pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", 0x02000000, + pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); sysbus_create_simple("scoop", 0x40800000, NULL); @@ -XXX,XX +XXX,XX @@ static void collie_machine_class_init(ObjectClass *oc, void *data) mc->init = collie_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("sa1110"); - mc->default_ram_size = 0x20000000; + mc->default_ram_size = RAM_SIZE; mc->default_ram_id = "strongarm.sdram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info collie_binfo = { static void collie_init(MachineState *machine) { - DriveInfo *dinfo; MachineClass *mc = MACHINE_GET_CLASS(machine); CollieMachineState *cms = COLLIE_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); - dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); - - dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + for (unsigned i = 0; i < 2; i++) { + DriveInfo *dinfo = drive_get(IF_PFLASH, 0, i); + pflash_cfi01_register(i ? SA_CS1 : SA_CS0, + i ? "collie.fl2" : "collie.fl1", FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + } sysbus_create_simple("scoop", 0x40800000, NULL); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add a comment describing the Connex uses a Numonyx RC28F128J3F75 flash, and the Verdex uses a Micron RC28F256P30TFA. Correct the Verdex machine description (we model the 'Pro' board). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-6-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ * Contributions after 2012-01-13 are licensed under the terms of the * GNU GPL, version 2 or (at your option) any later version. */ - + /* * Example usage: * @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } + /* Numonyx RC28F128J3F75 */ if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } + /* Micron RC28F256P30TFA */ if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); - mc->desc = "Gumstix Verdex (PXA270)"; + mc->desc = "Gumstix Verdex Pro XL6P COMs (PXA270)"; mc->init = verdex_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-7-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "hw/arm/pxa.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "cpu.h" -static const int sector_len = 128 * 1024; +#define CONNEX_FLASH_SIZE (16 * MiB) +#define CONNEX_RAM_SIZE (64 * MiB) + +#define VERDEX_FLASH_SIZE (32 * MiB) +#define VERDEX_RAM_SIZE (256 * MiB) + +#define FLASH_SECTOR_SIZE (128 * KiB) static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t connex_rom = 0x01000000; - uint32_t connex_ram = 0x04000000; - - cpu = pxa255_init(connex_ram); + cpu = pxa255_init(CONNEX_RAM_SIZE); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, + if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t verdex_rom = 0x02000000; - uint32_t verdex_ram = 0x10000000; - - cpu = pxa270_init(verdex_ram, machine->cpu_type); + cpu = pxa270_init(VERDEX_RAM_SIZE, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, + if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ * GNU GPL, version 2 or (at your option) any later version. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static const struct keymap map[0xE0] = { enum mainstone_model_e { mainstone }; -#define MAINSTONE_RAM 0x04000000 -#define MAINSTONE_ROM 0x00800000 -#define MAINSTONE_FLASH 0x02000000 +#define MAINSTONE_RAM_SIZE (64 * MiB) +#define MAINSTONE_ROM_SIZE (8 * MiB) +#define MAINSTONE_FLASH_SIZE (32 * MiB) static struct arm_boot_info mainstone_binfo = { .loader_start = PXA2XX_SDRAM_BASE, - .ram_size = 0x04000000, + .ram_size = MAINSTONE_RAM_SIZE, }; +#define FLASH_SECTOR_SIZE (256 * KiB) + static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { - uint32_t sector_len = 256 * 1024; hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 }; PXA2xxState *mpu; DeviceState *mst_irq; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* Setup CPU & memory */ mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); - memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, + memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM_SIZE, &error_fatal); memory_region_add_subregion(get_system_memory(), 0x00000000, rom); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, dinfo = drive_get(IF_PFLASH, 0, i); if (!pflash_cfi01_register(mainstone_flash_base[i], i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH, + MAINSTONE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "cpu.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo musicpal_key_info = { .class_init = musicpal_key_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static struct arm_boot_info musicpal_binfo = { .loader_start = 0x0, .board_id = 0x20e, @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) BlockBackend *blk = blk_by_legacy_dinfo(dinfo); flash_size = blk_getlength(blk); - if (flash_size != 8*1024*1024 && flash_size != 16*1024*1024 && - flash_size != 32*1024*1024) { + if (flash_size != 8 * MiB && flash_size != 16 * MiB && + flash_size != 32 * MiB) { error_report("Invalid flash image size"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) */ pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, - blk, 0x10000, + blk, FLASH_SECTOR_SIZE, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The total_ram_v1/total_ram_v2 definitions were never used. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { #define flash0_size (16 * 1024 * 1024) #define flash1_size ( 8 * 1024 * 1024) #define flash2_size (32 * 1024 * 1024) -#define total_ram_v1 (sdram_size + flash0_size + flash1_size + OMAP15XX_SRAM_SIZE) -#define total_ram_v2 (sdram_size + flash2_size + OMAP15XX_SRAM_SIZE) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ * with this program; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "ui/console.h" #include "hw/arm/omap.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define sdram_size 0x02000000 -#define sector_size (128 * 1024) -#define flash0_size (16 * 1024 * 1024) -#define flash1_size ( 8 * 1024 * 1024) -#define flash2_size (32 * 1024 * 1024) +#define SDRAM_SIZE (32 * MiB) +#define SECTOR_SIZE (128 * KiB) +#define FLASH0_SIZE (16 * MiB) +#define FLASH1_SIZE (8 * MiB) +#define FLASH2_SIZE (32 * MiB) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, - .ram_size = sdram_size, + .ram_size = SDRAM_SIZE, .board_id = 0x265, }; @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) static uint32_t cs3val = 0x00001139; DriveInfo *dinfo; int fl_idx; - uint32_t flash_size = flash0_size; + uint32_t flash_size = FLASH0_SIZE; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) } if (version == 2) { - flash_size = flash2_size; + flash_size = FLASH2_SIZE; } memory_region_add_subregion(address_space, OMAP_EMIFF_BASE, machine->ram); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) (dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { MemoryRegion *flash_1 = g_new(MemoryRegion, 1); memory_region_init_rom(flash_1, NULL, "omap_sx1.flash1-0", - flash1_size, &error_fatal); + FLASH1_SIZE, &error_fatal); memory_region_add_subregion(address_space, OMAP_CS1_BASE, flash_1); memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, - "sx1.cs1", OMAP_CS1_SIZE - flash1_size); + "sx1.cs1", OMAP_CS1_SIZE - FLASH1_SIZE); memory_region_add_subregion(address_space, - OMAP_CS1_BASE + flash1_size, &cs[1]); + OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", flash1_size, + "omap_sx1.flash1-1", FLASH1_SIZE, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v2_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v2; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v1_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v1; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "hw/arm/pxa.h" #include "hw/arm/boot.h" #include "hw/i2c/i2c.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { .class_init = aer915_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static void z2_init(MachineState *machine) { - uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; void *z2_lcd; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Upon introduction in commit b8433303fb ("Set proper device-width for vexpress flash"), ve_pflash_cfi01_register() was calling qdev_init_nofail() which can not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/vexpress.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0", dinfo); - if (!pflash0) { - error_report("vexpress: error registering flash 0"); - exit(1); - } if (map[VE_NORFLASHALIAS] != -1) { /* Map flash 0 as an alias into low memory */ @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) } dinfo = drive_get(IF_PFLASH, 0, 1); - if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", - dinfo)) { - error_report("vexpress: error registering flash 1"); - exit(1); - } + ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", dinfo); sram_size = 0x2000000; memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since its QOM'ification in commit 368a354f02 ("pflash_cfi0x: QOMified") the pflash_cfi01_register() function does not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 18 ++++++------------ hw/arm/mainstone.c | 13 +++++-------- hw/arm/omap_sx1.c | 22 ++++++++-------------- hw/arm/versatilepb.c | 6 ++---- hw/arm/z2.c | 9 +++------ 5 files changed, 24 insertions(+), 44 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 36 */ smc91c111_init(&nd_table[0], 0x04000300, @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 99 */ smc91c111_init(&nd_table[0], 0x04000300, diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); - if (!pflash_cfi01_register(mainstone_flash_base[i], - i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(mainstone_flash_base[i], + i ? "mainstone.flash1" : "mainstone.flash0", + MAINSTONE_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); } mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS, diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) fl_idx = 0; if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { - if (!pflash_cfi01_register(OMAP_CS0_BASE, - "omap_sx1.flash0-1", flash_size, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS0_BASE, + "omap_sx1.flash0-1", flash_size, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) memory_region_add_subregion(address_space, OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); - if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", FLASH1_SIZE, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS1_BASE, + "omap_sx1.flash1-1", FLASH1_SIZE, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } else { memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ static void versatile_init(MachineState *machine, int board_id) /* 0x34000000 NOR Flash */ dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", + pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", VERSATILE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, VERSATILE_FLASH_SECT_SIZE, - 4, 0x0089, 0x0018, 0x0000, 0x0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory.\n"); - } + 4, 0x0089, 0x0018, 0x0000, 0x0, 0); versatile_binfo.ram_size = machine->ram_size; versatile_binfo.board_id = board_id; diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); /* setup keypad */ pxa27x_register_keypad(mpu->kp, map, 0x100); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> To avoid forward-declaring PXA2xxI2CState, declare PXA2XX_I2C before its use in pxa2xx_i2c_init() prototype. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ void pxa27x_register_keypad(PXA2xxKeyPadState *kp, const struct keymap *map, int size); /* pxa2xx.c */ -typedef struct PXA2xxI2CState PXA2xxI2CState; +#define TYPE_PXA2XX_I2C "pxa2xx_i2c" +OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) + PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base, qemu_irq irq, uint32_t page_size); I2CBus *pxa2xx_i2c_bus(PXA2xxI2CState *s); -#define TYPE_PXA2XX_I2C "pxa2xx_i2c" typedef struct PXA2xxI2SState PXA2xxI2SState; -OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) #define TYPE_PXA2XX_FIR "pxa2xx-fir" OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxFIrState, PXA2XX_FIR) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Add a local 'struct omap_gpif_s *' variable to improve readability. (This also eases next commit conversion). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/omap_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; + struct omap_gpif_s *p = opaque; + struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; if (level) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap1.c | 115 ++++++++++++++++++-------------------- hw/arm/omap2.c | 40 ++++++------- hw/arm/omap_sx1.c | 2 +- hw/arm/palm.c | 2 +- hw/char/omap_uart.c | 7 +-- hw/display/omap_dss.c | 15 +++-- hw/display/omap_lcdc.c | 9 ++- hw/dma/omap_dma.c | 15 +++-- hw/gpio/omap_gpio.c | 15 +++-- hw/intc/omap_intc.c | 12 ++-- hw/misc/omap_gpmc.c | 12 ++-- hw/misc/omap_l4.c | 7 +-- hw/misc/omap_sdrc.c | 7 +-- hw/misc/omap_tap.c | 5 +- hw/sd/omap_mmc.c | 9 ++- hw/ssi/omap_spi.c | 7 +-- hw/timer/omap_gptimer.c | 22 ++++---- hw/timer/omap_synctimer.c | 4 +- 18 files changed, 142 insertions(+), 163 deletions(-) diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -XXX,XX +XXX,XX @@ static void omap_timer_fire(void *opaque) static void omap_timer_tick(void *opaque) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); omap_timer_fire(timer); @@ -XXX,XX +XXX,XX @@ static void omap_timer_tick(void *opaque) static void omap_timer_clk_update(void *opaque, int line, int on) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ static void omap_timer_clk_setup(struct omap_mpu_timer_s *timer) static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, static void omap_mpu_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_watchdog_timer_s { static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, static void omap_wd_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_32khz_timer_s { static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, static void omap_os_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static struct omap_32khz_timer_s *omap_os_timer_init(MemoryRegion *memory, static uint64_t omap_ulpd_pm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_ulpd_req_update(struct omap_mpu_state_s *s, static void omap_ulpd_pm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; int64_t now, ticks; int div, mult; static const int bypass_div[4] = { 1, 2, 4, 4 }; @@ -XXX,XX +XXX,XX @@ static void omap_ulpd_pm_init(MemoryRegion *system_memory, static uint64_t omap_pin_cfg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_pin_modconf1_update(struct omap_mpu_state_s *s, static void omap_pin_cfg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t diff; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_pin_cfg_init(MemoryRegion *system_memory, static uint64_t omap_id_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static void omap_id_init(MemoryRegion *memory, struct omap_mpu_state_s *mpu) static uint64_t omap_mpui_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpui_read(void *opaque, hwaddr addr, static void omap_mpui_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_tipb_bridge_s { static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, static void omap_tipb_bridge_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static struct omap_tipb_bridge_s *omap_tipb_bridge_init( static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, static void omap_tcmi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct dpll_ctl_s { static uint64_t omap_dpll_read(void *opaque, hwaddr addr, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dpll_read(void *opaque, hwaddr addr, static void omap_dpll_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; uint16_t diff; static const int bypass_div[4] = { 1, 2, 4, 4 }; int div, mult; @@ -XXX,XX +XXX,XX @@ static struct dpll_ctl_s *omap_dpll_init(MemoryRegion *memory, static uint64_t omap_clkm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_clkm_ckout1_update(struct omap_mpu_state_s *s, static void omap_clkm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; omap_clk clk; static const char *clkschemename[8] = { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_clkm_ops = { static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; CPUState *cpu = CPU(s->cpu); if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_clkdsp_idlect2_update(struct omap_mpu_state_s *s, static void omap_clkdsp_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; if (size != 2) { @@ -XXX,XX +XXX,XX @@ struct omap_mpuio_s { static void omap_mpuio_set(void *opaque, int line, int level) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; uint16_t prev = s->inputs; if (level) @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_kbd_update(struct omap_mpuio_s *s) static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, static void omap_mpuio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_reset(struct omap_mpuio_s *s) static void omap_mpuio_onoff(void *opaque, int line, int on) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; s->clk = on; if (on) @@ -XXX,XX +XXX,XX @@ static void omap_uwire_transfer_start(struct omap_uwire_s *s) } } -static uint64_t omap_uwire_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uwire_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uwire_read(void *opaque, hwaddr addr, static void omap_uwire_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_update(struct omap_pwl_s *s) } } -static uint64_t omap_pwl_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwl_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwl_read(void *opaque, hwaddr addr, static void omap_pwl_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_reset(struct omap_pwl_s *s) static void omap_pwl_clk_update(void *opaque, int line, int on) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; s->clk = on; omap_pwl_update(s); @@ -XXX,XX +XXX,XX @@ struct omap_pwt_s { omap_clk clk; }; -static uint64_t omap_pwt_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwt_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwt_read(void *opaque, hwaddr addr, static void omap_pwt_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_rtc_alarm_update(struct omap_rtc_s *s) printf("%s: conversion failed\n", __func__); } -static uint64_t omap_rtc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rtc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint8_t i; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rtc_read(void *opaque, hwaddr addr, static void omap_rtc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; struct tm new_tm; time_t ti[2]; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_rx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_source_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->rx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_tx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_sink_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->tx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_req_update(struct omap_mcbsp_s *s) static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, static void omap_mcbsp_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; switch (offset) { @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr, static void omap_mcbsp_writew(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (offset == 0x04) { /* DXR */ @@ -XXX,XX +XXX,XX @@ static struct omap_mcbsp_s *omap_mcbsp_init(MemoryRegion *system_memory, static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->rx_rate) { s->rx_req = s->codec->in.len; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) static void omap_mcbsp_i2s_start(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->tx_rate) { s->tx_req = s->codec->out.size; @@ -XXX,XX +XXX,XX @@ static void omap_lpg_reset(struct omap_lpg_s *s) omap_lpg_update(s); } -static uint64_t omap_lpg_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lpg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lpg_read(void *opaque, hwaddr addr, static void omap_lpg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_lpg_ops = { static void omap_lpg_clk_update(void *opaque, int line, int on) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; s->clk = on; omap_lpg_update(s); @@ -XXX,XX +XXX,XX @@ static void omap_setup_mpui_io(MemoryRegion *system_memory, /* General chip reset */ static void omap1_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_mpu_timer_reset(mpu->timer[0]); @@ -XXX,XX +XXX,XX @@ static void omap_setup_dsp_mapping(MemoryRegion *system_memory, void omap_mpu_wakeup(void *opaque, int irq, int req) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; CPUState *cpu = CPU(mpu->cpu); if (cpu->halted) { diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ static inline void omap_eac_out_empty(struct omap_eac_s *s) static void omap_eac_in_cb(void *opaque, int avail_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.rxavail = avail_b >> 2; omap_eac_in_refill(s); @@ -XXX,XX +XXX,XX @@ static void omap_eac_in_cb(void *opaque, int avail_b) static void omap_eac_out_cb(void *opaque, int free_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.txavail = free_b >> 2; if (s->codec.txlen) @@ -XXX,XX +XXX,XX @@ static void omap_eac_reset(struct omap_eac_s *s) omap_eac_interrupt_update(s); } -static uint64_t omap_eac_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_eac_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; uint32_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_eac_read(void *opaque, hwaddr addr, static void omap_eac_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_sti_reset(struct omap_sti_s *s) static uint64_t omap_sti_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_read(void *opaque, hwaddr addr, static void omap_sti_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_sti_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, unsigned size) { OMAP_BAD_REG(addr); return 0; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, static void omap_sti_fifo_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; int ch = addr >> 6; uint8_t byte = value; @@ -XXX,XX +XXX,XX @@ static void omap_prcm_int_update(struct omap_prcm_s *s, int dom) static uint64_t omap_prcm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_prcm_dpll_update(struct omap_prcm_s *s) static void omap_prcm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_sysctl_s { static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int value; @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) return 0; } -static void omap_sysctl_write8(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write8(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int prev_value; @@ -XXX,XX +XXX,XX @@ static void omap_sysctl_write8(void *opaque, hwaddr addr, } } -static void omap_sysctl_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static struct omap_sysctl_s *omap_sysctl_init(struct omap_target_agent_s *ta, /* General chip reset */ static void omap2_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_prcm_reset(mpu->prcm); diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static uint64_t static_read(void *opaque, hwaddr offset, unsigned size) { - uint32_t *val = (uint32_t *) opaque; + uint32_t *val = opaque; uint32_t mask = (4 / size) - 1; return *val >> ((offset & mask) << 3); diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static struct { static void palmte_button_event(void *opaque, int keycode) { - struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *cpu = opaque; if (palmte_keymap[keycode & 0x7f].row != -1) omap_mpuio_key(cpu->mpuio, diff --git a/hw/char/omap_uart.c b/hw/char/omap_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/omap_uart.c +++ b/hw/char/omap_uart.c @@ -XXX,XX +XXX,XX @@ struct omap_uart_s *omap_uart_init(hwaddr base, return s; } -static uint64_t omap_uart_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uart_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { return omap_badwidth_read8(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uart_read(void *opaque, hwaddr addr, static void omap_uart_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { omap_badwidth_write8(opaque, addr, value); diff --git a/hw/display/omap_dss.c b/hw/display/omap_dss.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_dss.c +++ b/hw/display/omap_dss.c @@ -XXX,XX +XXX,XX @@ void omap_dss_reset(struct omap_dss_s *s) static uint64_t omap_diss_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_diss_read(void *opaque, hwaddr addr, static void omap_diss_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_diss_ops = { static uint64_t omap_disc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_disc_read(void *opaque, hwaddr addr, static void omap_disc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_rfbi_transfer_start(struct omap_dss_s *s) omap_dispc_interrupt_update(s); } -static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, static void omap_rfbi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/display/omap_lcdc.c b/hw/display/omap_lcdc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_lcdc.c +++ b/hw/display/omap_lcdc.c @@ -XXX,XX +XXX,XX @@ static void draw_line16_32(void *opaque, uint8_t *d, const uint8_t *s, static void omap_update_display(void *opaque) { - struct omap_lcd_panel_s *omap_lcd = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *omap_lcd = opaque; DisplaySurface *surface; drawfn draw_line; int size, height, first, last; @@ -XXX,XX +XXX,XX @@ static void omap_lcd_update(struct omap_lcd_panel_s *s) { } } -static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, static void omap_lcdc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ diff --git a/hw/dma/omap_dma.c b/hw/dma/omap_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/omap_dma.c +++ b/hw/dma/omap_dma.c @@ -XXX,XX +XXX,XX @@ static int omap_dma_sys_read(struct omap_dma_s *s, int offset, return 0; } -static uint64_t omap_dma_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_dma_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma_read(void *opaque, hwaddr addr, static void omap_dma_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_dma_ops = { static void omap_dma_request(void *opaque, int drq, int req) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; /* The request pins are level triggered in QEMU. */ if (req) { if (~s->dma->drqbmp & (1ULL << drq)) { @@ -XXX,XX +XXX,XX @@ static void omap_dma_request(void *opaque, int drq, int req) /* XXX: this won't be needed once soc_dma knows about clocks. */ static void omap_dma_clk_update(void *opaque, int line, int on) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int i; s->dma->freq = omap_clk_getrate(s->clk); @@ -XXX,XX +XXX,XX @@ static void omap_dma_interrupts_4_update(struct omap_dma_s *s) static uint64_t omap_dma4_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int irqn = 0, chnum; struct omap_dma_channel_s *ch; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma4_read(void *opaque, hwaddr addr, static void omap_dma4_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int chnum, irqn = 0; struct omap_dma_channel_s *ch; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ static void omap_gpio_set(void *opaque, int line, int level) static uint64_t omap_gpio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpio_read(void *opaque, hwaddr addr, static void omap_gpio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_reset(struct omap2_gpio_s *s) static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; switch (addr) { case 0x00: /* GPIO_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) static void omap2_gpio_module_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; uint32_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) s->gpo = 0; } -static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; diff --git a/hw/misc/omap_gpmc.c b/hw/misc/omap_gpmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_gpmc.c +++ b/hw/misc/omap_gpmc.c @@ -XXX,XX +XXX,XX @@ static void omap_gpmc_dma_update(struct omap_gpmc_s *s, int value) static uint64_t omap_nand_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; uint64_t v; nand_setpins(f->dev, 0, 0, 0, 1, 0); switch (omap_gpmc_devsize(f)) { @@ -XXX,XX +XXX,XX @@ static void omap_nand_setio(DeviceState *dev, uint64_t value, static void omap_nand_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; nand_setpins(f->dev, 0, 0, 0, 1, 0); omap_nand_setio(f->dev, value, omap_gpmc_devsize(f), size); } @@ -XXX,XX +XXX,XX @@ static void fill_prefetch_fifo(struct omap_gpmc_s *s) static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; uint32_t data; if (s->prefetch.config1 & 1) { /* The TRM doesn't define the behaviour if you read from the @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, static void omap_gpmc_prefetch_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs = prefetch_cs(s->prefetch.config1); if ((s->prefetch.config1 & 1) == 0) { /* The TRM doesn't define the behaviour of writing to the @@ -XXX,XX +XXX,XX @@ static int gpmc_wordaccess_only(hwaddr addr) static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, static void omap_gpmc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; diff --git a/hw/misc/omap_l4.c b/hw/misc/omap_l4.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_l4.c +++ b/hw/misc/omap_l4.c @@ -XXX,XX +XXX,XX @@ hwaddr omap_l4_region_size(struct omap_target_agent_s *ta, return ta->start[region].size; } -static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, static void omap_l4ta_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_sdrc.c b/hw/misc/omap_sdrc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_sdrc.c +++ b/hw/misc/omap_sdrc.c @@ -XXX,XX +XXX,XX @@ void omap_sdrc_reset(struct omap_sdrc_s *s) s->config = 0x10; } -static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, static void omap_sdrc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_tap.c b/hw/misc/omap_tap.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_tap.c +++ b/hw/misc/omap_tap.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" /* TEST-Chip-level TAP */ -static uint64_t omap_tap_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_tap_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ void omap_mmc_reset(struct omap_mmc_s *host) device_cold_reset(DEVICE(host->card)); } -static uint64_t omap_mmc_read(void *opaque, hwaddr offset, - unsigned size) +static uint64_t omap_mmc_read(void *opaque, hwaddr offset, unsigned size) { uint16_t i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, offset); @@ -XXX,XX +XXX,XX @@ static void omap_mmc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { int i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, offset, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_mmc_ops = { static void omap_mmc_cover_cb(void *opaque, int line, int level) { - struct omap_mmc_s *host = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *host = opaque; if (!host->cdet_state && level) { host->status |= 0x0002; diff --git a/hw/ssi/omap_spi.c b/hw/ssi/omap_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/omap_spi.c +++ b/hw/ssi/omap_spi.c @@ -XXX,XX +XXX,XX @@ void omap_mcspi_reset(struct omap_mcspi_s *s) omap_mcspi_interrupt_update(s); } -static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; uint32_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, static void omap_mcspi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; if (size != 4) { diff --git a/hw/timer/omap_gptimer.c b/hw/timer/omap_gptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_gptimer.c +++ b/hw/timer/omap_gptimer.c @@ -XXX,XX +XXX,XX @@ static inline void omap_gp_timer_trigger(struct omap_gp_timer_s *timer) static void omap_gp_timer_tick(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (!timer->ar) { timer->st = 0; @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_tick(void *opaque) static void omap_gp_timer_match(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (timer->trigger == gpt_trigger_both) omap_gp_timer_trigger(timer); @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_match(void *opaque) static void omap_gp_timer_input(void *opaque, int line, int on) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; int trigger; switch (s->capture) { @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_input(void *opaque, int line, int on) static void omap_gp_timer_clk_update(void *opaque, int line, int on) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; omap_gp_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ void omap_gp_timer_reset(struct omap_gp_timer_s *s) static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; uint32_t ret; if (addr & 2) @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) } } -static void omap_gp_timer_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_write(void *opaque, hwaddr addr, } } -static void omap_gp_timer_writeh(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; if (addr & 2) omap_gp_timer_write(opaque, addr, (value << 16) | s->writeh); diff --git a/hw/timer/omap_synctimer.c b/hw/timer/omap_synctimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_synctimer.c +++ b/hw/timer/omap_synctimer.c @@ -XXX,XX +XXX,XX @@ void omap_synctimer_reset(struct omap_synctimer_s *s) static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; switch (addr) { case 0x00: /* 32KSYNCNT_REV */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) static uint32_t omap_synctimer_readh(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; uint32_t ret; if (addr & 2) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_gpif_s -> Omap1GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +++--- hw/gpio/omap_gpio.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_i2c_set_fclk(OMAPI2CState *i2c, omap_clk clk); /* omap_gpio.c */ #define TYPE_OMAP1_GPIO "omap-gpio" -DECLARE_INSTANCE_CHECKER(struct omap_gpif_s, OMAP1_GPIO, +typedef struct Omap1GpioState Omap1GpioState; +DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap_gpif_s omap_gpif; typedef struct omap2_gpif_s omap2_gpif; /* TODO: clock framework (see above) */ -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk); +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpio_s { uint16_t pins; }; -struct omap_gpif_s { +struct Omap1GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpif_s *p = opaque; + Omap1GpioState *p = opaque; struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpio_module_ops = { static void omap_gpif_reset(DeviceState *dev) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); omap_gpio_reset(&s->omap1); } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpif_top_ops = { static void omap_gpio_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_gpif_s *s = OMAP1_GPIO(obj); + Omap1GpioState *s = OMAP1_GPIO(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); qdev_init_gpio_in(dev, omap_gpio_set, 16); @@ -XXX,XX +XXX,XX @@ static void omap_gpio_init(Object *obj) static void omap_gpio_realize(DeviceState *dev, Error **errp) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); if (!s->clk) { error_setg(errp, "omap-gpio: clk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_realize(DeviceState *dev, Error **errp) } } -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk) +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk) { gpio->clk = clk; } static Property omap_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap1GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap_gpio_info = { .name = TYPE_OMAP1_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap_gpif_s), + .instance_size = sizeof(Omap1GpioState), .instance_init = omap_gpio_init, .class_init = omap_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap2_gpif_s -> Omap2GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/gpio/omap_gpio.c | 20 ++++++++++---------- 2 files changed, 14 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" -DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, +typedef struct Omap2GpioState Omap2GpioState; +DECLARE_INSTANCE_CHECKER(Omap2GpioState, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap2_gpif_s omap2_gpif; - /* TODO: clock framework (see above) */ void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk); +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk); /* OMAP2 l4 Interconnect */ struct omap_l4_s; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap2_gpio_s { uint8_t delay; }; -struct omap2_gpif_s { +struct Omap2GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) static void omap2_gpio_set(void *opaque, int line, int level) { - struct omap2_gpif_s *p = opaque; + Omap2GpioState *p = opaque; struct omap2_gpio_s *s = &p->modules[line >> 5]; line &= 31; @@ -XXX,XX +XXX,XX @@ static void omap_gpif_reset(DeviceState *dev) static void omap2_gpif_reset(DeviceState *dev) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); int i; for (i = 0; i < s->modulecount; i++) { @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static void omap_gpio_realize(DeviceState *dev, Error **errp) static void omap2_gpio_realize(DeviceState *dev, Error **errp) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); int i; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_gpio_info = { .class_init = omap_gpio_class_init, }; -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk) +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk) { gpio->iclk = clk; } -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk) +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk) { assert(i <= 5); gpio->fclk[i] = clk; } static Property omap2_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap2GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap2_gpio_info = { .name = TYPE_OMAP2_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap2_gpif_s), + .instance_size = sizeof(Omap2GpioState), .class_init = omap2_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_intr_handler_s -> OMAPIntcState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/intc/omap_intc.c | 38 +++++++++++++++++++------------------- 2 files changed, 23 insertions(+), 24 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_clk_reparent(omap_clk clk, omap_clk parent); /* omap_intc.c */ #define TYPE_OMAP_INTC "common-omap-intc" -typedef struct omap_intr_handler_s omap_intr_handler; -DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, - TYPE_OMAP_INTC) +typedef struct OMAPIntcState OMAPIntcState; +DECLARE_INSTANCE_CHECKER(OMAPIntcState, OMAP_INTC, TYPE_OMAP_INTC) /* @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, * (ie the struct omap_mpu_state_s*) to do the clockname to pointer * translation.) */ -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk); -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk); +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk); +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk); /* omap_i2c.c */ #define TYPE_OMAP_I2C "omap_i2c" diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_bank_s { unsigned char priority[32]; }; -struct omap_intr_handler_s { +struct OMAPIntcState { SysBusDevice parent_obj; qemu_irq *pins; @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_s { struct omap_intr_handler_bank_s bank[3]; }; -static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) +static void omap_inth_sir_update(OMAPIntcState *s, int is_fiq) { int i, j, sir_intr, p_intr, p; uint32_t level; @@ -XXX,XX +XXX,XX @@ static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) s->sir_intr[is_fiq] = sir_intr; } -static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) +static inline void omap_inth_update(OMAPIntcState *s, int is_fiq) { int i; uint32_t has_intr = 0; @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_inth_mem_ops = { static void omap_inth_reset(DeviceState *dev) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); int i; for (i = 0; i < s->nbanks; ++i){ @@ -XXX,XX +XXX,XX @@ static void omap_inth_reset(DeviceState *dev) static void omap_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->nbanks = 1; @@ -XXX,XX +XXX,XX @@ static void omap_intc_init(Object *obj) static void omap_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap-intc: clk not connected"); } } -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk) { intc->iclk = clk; } -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk) { intc->fclk = clk; } static Property omap_intc_properties[] = { - DEFINE_PROP_UINT32("size", struct omap_intr_handler_s, size, 0x100), + DEFINE_PROP_UINT32("size", OMAPIntcState, size, 0x100), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_inth_mem_ops = { static void omap2_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->level_only = 1; @@ -XXX,XX +XXX,XX @@ static void omap2_intc_init(Object *obj) static void omap2_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap2-intc: iclk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_intc_realize(DeviceState *dev, Error **errp) } static Property omap2_intc_properties[] = { - DEFINE_PROP_UINT8("revision", struct omap_intr_handler_s, + DEFINE_PROP_UINT8("revision", OMAPIntcState, revision, 0x21), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap2_intc_info = { static const TypeInfo omap_intc_type_info = { .name = TYPE_OMAP_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(omap_intr_handler), + .instance_size = sizeof(OMAPIntcState), .abstract = true, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename stellaris_adc_state -> StellarisADCState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 73 +++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 37 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) #define STELLARIS_ADC_FIFO_FULL 0x1000 #define TYPE_STELLARIS_ADC "stellaris-adc" -typedef struct StellarisADCState stellaris_adc_state; -DECLARE_INSTANCE_CHECKER(stellaris_adc_state, STELLARIS_ADC, - TYPE_STELLARIS_ADC) +typedef struct StellarisADCState StellarisADCState; +DECLARE_INSTANCE_CHECKER(StellarisADCState, STELLARIS_ADC, TYPE_STELLARIS_ADC) struct StellarisADCState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct StellarisADCState { qemu_irq irq[4]; }; -static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) +static uint32_t stellaris_adc_fifo_read(StellarisADCState *s, int n) { int tail; @@ -XXX,XX +XXX,XX @@ static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) return s->fifo[n].data[tail]; } -static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, +static void stellaris_adc_fifo_write(StellarisADCState *s, int n, uint32_t value) { int head; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, s->fifo[n].state |= STELLARIS_ADC_FIFO_FULL; } -static void stellaris_adc_update(stellaris_adc_state *s) +static void stellaris_adc_update(StellarisADCState *s) { int level; int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(stellaris_adc_state *s) +static void stellaris_adc_reset(StellarisADCState *s) { int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_UINT32(actss, stellaris_adc_state), - VMSTATE_UINT32(ris, stellaris_adc_state), - VMSTATE_UINT32(im, stellaris_adc_state), - VMSTATE_UINT32(emux, stellaris_adc_state), - VMSTATE_UINT32(ostat, stellaris_adc_state), - VMSTATE_UINT32(ustat, stellaris_adc_state), - VMSTATE_UINT32(sspri, stellaris_adc_state), - VMSTATE_UINT32(sac, stellaris_adc_state), - VMSTATE_UINT32(fifo[0].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[0].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[0], stellaris_adc_state), - VMSTATE_UINT32(ssctl[0], stellaris_adc_state), - VMSTATE_UINT32(fifo[1].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[1].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[1], stellaris_adc_state), - VMSTATE_UINT32(ssctl[1], stellaris_adc_state), - VMSTATE_UINT32(fifo[2].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[2].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[2], stellaris_adc_state), - VMSTATE_UINT32(ssctl[2], stellaris_adc_state), - VMSTATE_UINT32(fifo[3].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[3].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[3], stellaris_adc_state), - VMSTATE_UINT32(ssctl[3], stellaris_adc_state), - VMSTATE_UINT32(noise, stellaris_adc_state), + VMSTATE_UINT32(actss, StellarisADCState), + VMSTATE_UINT32(ris, StellarisADCState), + VMSTATE_UINT32(im, StellarisADCState), + VMSTATE_UINT32(emux, StellarisADCState), + VMSTATE_UINT32(ostat, StellarisADCState), + VMSTATE_UINT32(ustat, StellarisADCState), + VMSTATE_UINT32(sspri, StellarisADCState), + VMSTATE_UINT32(sac, StellarisADCState), + VMSTATE_UINT32(fifo[0].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[0].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[0], StellarisADCState), + VMSTATE_UINT32(ssctl[0], StellarisADCState), + VMSTATE_UINT32(fifo[1].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[1].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[1], StellarisADCState), + VMSTATE_UINT32(ssctl[1], StellarisADCState), + VMSTATE_UINT32(fifo[2].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[2].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[2], StellarisADCState), + VMSTATE_UINT32(ssctl[2], StellarisADCState), + VMSTATE_UINT32(fifo[3].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[3].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[3], StellarisADCState), + VMSTATE_UINT32(ssctl[3], StellarisADCState), + VMSTATE_UINT32(noise, StellarisADCState), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { static void stellaris_adc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - stellaris_adc_state *s = STELLARIS_ADC(obj); + StellarisADCState *s = STELLARIS_ADC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_class_init(ObjectClass *klass, void *data) static const TypeInfo stellaris_adc_info = { .name = TYPE_STELLARIS_ADC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(stellaris_adc_state), + .instance_size = sizeof(StellarisADCState), .instance_init = stellaris_adc_init, .class_init = stellaris_adc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The typedef and definitions are generated by the OBJECT_DECLARE_TYPE macro in "hw/arm/bcm2836.h": 20 #define TYPE_BCM283X "bcm283x" 21 OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) The script ran in commit a489d1951c ("Use OBJECT_DECLARE_TYPE when possible") missed them because they are declared in a different file unit. Remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" -typedef struct BCM283XClass { +struct BCM283XClass { /*< private >*/ DeviceClass parent_class; /*< public >*/ @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; -} BCM283XClass; - -#define BCM283X_CLASS(klass) \ - OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) -#define BCM283X_GET_CLASS(obj) \ - OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) +}; static Property bcm2836_enabled_cores_property = DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/adc/npcm7xx_adc.h | 7 +++---- include/hw/arm/npcm7xx.h | 18 ++++++------------ include/hw/i2c/npcm7xx_smbus.h | 7 +++---- include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +++--- include/hw/misc/npcm7xx_mft.h | 7 +++---- include/hw/misc/npcm7xx_pwm.h | 3 +-- include/hw/misc/npcm7xx_rng.h | 6 +++--- include/hw/net/npcm7xx_emc.h | 5 +---- include/hw/sd/npcm7xx_sdhci.h | 4 ++-- 10 files changed, 26 insertions(+), 39 deletions(-) diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/adc/npcm7xx_adc.h +++ b/include/hw/adc/npcm7xx_adc.h @@ -XXX,XX +XXX,XX @@ * @iref: The internal reference voltage, initialized at launch time. * @rv: The calibrated output values of 0.5V and 1.5V for the ADC. */ -typedef struct { +struct NPCM7xxADCState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t iref; uint16_t calibration_r_values[NPCM7XX_ADC_NUM_CALIB]; -} NPCM7xxADCState; +}; #define TYPE_NPCM7XX_ADC "npcm7xx-adc" -#define NPCM7XX_ADC(obj) \ - OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxADCState, NPCM7XX_ADC) #endif /* NPCM7XX_ADC_H */ diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_NR_PWM_MODULES 2 -typedef struct NPCM7xxMachine { +struct NPCM7xxMachine { MachineState parent; /* * PWM fan splitter. each splitter connects to one PWM output and @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachine { */ SplitIRQ fan_splitter[NPCM7XX_NR_PWM_MODULES * NPCM7XX_PWM_PER_MODULE]; -} NPCM7xxMachine; +}; #define TYPE_NPCM7XX_MACHINE MACHINE_TYPE_NAME("npcm7xx") -#define NPCM7XX_MACHINE(obj) \ - OBJECT_CHECK(NPCM7xxMachine, (obj), TYPE_NPCM7XX_MACHINE) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMachine, NPCM7XX_MACHINE) typedef struct NPCM7xxMachineClass { MachineClass parent; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachineClass { #define NPCM7XX_MACHINE_GET_CLASS(obj) \ OBJECT_GET_CLASS(NPCM7xxMachineClass, (obj), TYPE_NPCM7XX_MACHINE) -typedef struct NPCM7xxState { +struct NPCM7xxState { DeviceState parent; ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS]; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; -} NPCM7xxState; +}; #define TYPE_NPCM7XX "npcm7xx" -#define NPCM7XX(obj) OBJECT_CHECK(NPCM7xxState, (obj), TYPE_NPCM7XX) +OBJECT_DECLARE_TYPE(NPCM7xxState, NPCM7xxClass, NPCM7XX) #define TYPE_NPCM730 "npcm730" #define TYPE_NPCM750 "npcm750" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClass { uint32_t num_cpus; } NPCM7xxClass; -#define NPCM7XX_CLASS(klass) \ - OBJECT_CLASS_CHECK(NPCM7xxClass, (klass), TYPE_NPCM7XX) -#define NPCM7XX_GET_CLASS(obj) \ - OBJECT_GET_CLASS(NPCM7xxClass, (obj), TYPE_NPCM7XX) - /** * npcm7xx_load_kernel - Loads memory with everything needed to boot * @machine - The machine containing the SoC to be booted. diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/npcm7xx_smbus.h +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ typedef enum NPCM7xxSMBusStatus { * @rx_cur: The current position of rx_fifo. * @status: The current status of the SMBus. */ -typedef struct NPCM7xxSMBusState { +struct NPCM7xxSMBusState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSMBusState { uint8_t rx_cur; NPCM7xxSMBusStatus status; -} NPCM7xxSMBusState; +}; #define TYPE_NPCM7XX_SMBUS "npcm7xx-smbus" -#define NPCM7XX_SMBUS(obj) OBJECT_CHECK(NPCM7xxSMBusState, (obj), \ - TYPE_NPCM7XX_SMBUS) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxSMBusState, NPCM7XX_SMBUS) #endif /* NPCM7XX_SMBUS_H */ diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxCLKState { }; #define TYPE_NPCM7XX_CLK "npcm7xx-clk" -#define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxCLKState, NPCM7XX_CLK) #endif /* NPCM7XX_CLK_H */ diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t)) -typedef struct NPCM7xxGCRState { +struct NPCM7xxGCRState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxGCRState { uint32_t reset_pwron; uint32_t reset_mdlr; uint32_t reset_intcr3; -} NPCM7xxGCRState; +}; #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" -#define NPCM7XX_GCR(obj) OBJECT_CHECK(NPCM7xxGCRState, (obj), TYPE_NPCM7XX_GCR) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxGCRState, NPCM7XX_GCR) #endif /* NPCM7XX_GCR_H */ diff --git a/include/hw/misc/npcm7xx_mft.h b/include/hw/misc/npcm7xx_mft.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_mft.h +++ b/include/hw/misc/npcm7xx_mft.h @@ -XXX,XX +XXX,XX @@ * @max_rpm: The maximum rpm for fans. Order: A0, B0, A1, B1. * @duty: The duty cycles for fans, relative to NPCM7XX_PWM_MAX_DUTY. */ -typedef struct NPCM7xxMFTState { +struct NPCM7xxMFTState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMFTState { uint32_t max_rpm[NPCM7XX_MFT_FANIN_COUNT]; uint32_t duty[NPCM7XX_MFT_FANIN_COUNT]; -} NPCM7xxMFTState; +}; #define TYPE_NPCM7XX_MFT "npcm7xx-mft" -#define NPCM7XX_MFT(obj) \ - OBJECT_CHECK(NPCM7xxMFTState, (obj), TYPE_NPCM7XX_MFT) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMFTState, NPCM7XX_MFT) #endif /* NPCM7XX_MFT_H */ diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_pwm.h +++ b/include/hw/misc/npcm7xx_pwm.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxPWMState { }; #define TYPE_NPCM7XX_PWM "npcm7xx-pwm" -#define NPCM7XX_PWM(obj) \ - OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxPWMState, NPCM7XX_PWM) #endif /* NPCM7XX_PWM_H */ diff --git a/include/hw/misc/npcm7xx_rng.h b/include/hw/misc/npcm7xx_rng.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_rng.h +++ b/include/hw/misc/npcm7xx_rng.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" -typedef struct NPCM7xxRNGState { +struct NPCM7xxRNGState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRNGState { uint8_t rngcs; uint8_t rngd; uint8_t rngmode; -} NPCM7xxRNGState; +}; #define TYPE_NPCM7XX_RNG "npcm7xx-rng" -#define NPCM7XX_RNG(obj) OBJECT_CHECK(NPCM7xxRNGState, (obj), TYPE_NPCM7XX_RNG) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxRNGState, NPCM7XX_RNG) #endif /* NPCM7XX_RNG_H */ diff --git a/include/hw/net/npcm7xx_emc.h b/include/hw/net/npcm7xx_emc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/npcm7xx_emc.h +++ b/include/hw/net/npcm7xx_emc.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxEMCState { bool rx_active; }; -typedef struct NPCM7xxEMCState NPCM7xxEMCState; - #define TYPE_NPCM7XX_EMC "npcm7xx-emc" -#define NPCM7XX_EMC(obj) \ - OBJECT_CHECK(NPCM7xxEMCState, (obj), TYPE_NPCM7XX_EMC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxEMCState, NPCM7XX_EMC) #endif /* NPCM7XX_EMC_H */ diff --git a/include/hw/sd/npcm7xx_sdhci.h b/include/hw/sd/npcm7xx_sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/npcm7xx_sdhci.h +++ b/include/hw/sd/npcm7xx_sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRegs { uint32_t boottoctrl; } NPCM7xxRegisters; -typedef struct NPCM7xxSDHCIState { +struct NPCM7xxSDHCIState { SysBusDevice parent; MemoryRegion container; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSDHCIState { NPCM7xxRegisters regs; SDHCIState sdhci; -} NPCM7xxSDHCIState; +}; #endif /* NPCM7XX_SDHCI_H */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The structure is named SECUREECState. Rename the type accordingly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "sysemu/runstate.h" -typedef struct { +typedef struct SECUREECState { SysBusDevice parent_obj; MemoryRegion iomem; } SECUREECState; -#define TYPE_SBSA_EC "sbsa-ec" -#define SECURE_EC(obj) OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_EC) +#define TYPE_SBSA_SECURE_EC "sbsa-ec" +#define SBSA_SECURE_EC(obj) \ + OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, @@ -XXX,XX +XXX,XX @@ static uint64_t sbsa_ec_read(void *opaque, hwaddr offset, unsigned size) } static void sbsa_ec_write(void *opaque, hwaddr offset, - uint64_t value, unsigned size) + uint64_t value, unsigned size) { if (offset == 0) { /* PSCI machine power command register */ switch (value) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps sbsa_ec_ops = { static void sbsa_ec_init(Object *obj) { - SECUREECState *s = SECURE_EC(obj); + SECUREECState *s = SBSA_SECURE_EC(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); memory_region_init_io(&s->iomem, obj, &sbsa_ec_ops, s, "sbsa-ec", @@ -XXX,XX +XXX,XX @@ static void sbsa_ec_class_init(ObjectClass *klass, void *data) } static const TypeInfo sbsa_ec_info = { - .name = TYPE_SBSA_EC, + .name = TYPE_SBSA_SECURE_EC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(SECUREECState), .instance_init = sbsa_ec_init, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This model was merged few days before the QOM cleanup from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible") was pulled and merged. Manually adapt. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ typedef struct SECUREECState { } SECUREECState; #define TYPE_SBSA_SECURE_EC "sbsa-ec" -#define SBSA_SECURE_EC(obj) \ - OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) +OBJECT_DECLARE_SIMPLE_TYPE(SECUREECState, SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/intc/xilinx_intc.c:45:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/xilinx_intc.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xilinx_intc.c +++ b/hw/intc/xilinx_intc.c @@ -XXX,XX +XXX,XX @@ #define R_MAX 8 #define TYPE_XILINX_INTC "xlnx.xps-intc" -DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, - TYPE_XILINX_INTC) +typedef struct XpsIntc XpsIntc; +DECLARE_INSTANCE_CHECKER(XpsIntc, XILINX_INTC, TYPE_XILINX_INTC) -struct xlx_pic +struct XpsIntc { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct xlx_pic uint32_t irq_pin_state; }; -static void update_irq(struct xlx_pic *p) +static void update_irq(XpsIntc *p) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void update_irq(struct xlx_pic *p) qemu_set_irq(p->parent_irq, (p->regs[R_MER] & 1) && p->regs[R_IPR]); } -static uint64_t -pic_read(void *opaque, hwaddr addr, unsigned int size) +static uint64_t pic_read(void *opaque, hwaddr addr, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t r = 0; addr >>= 2; @@ -XXX,XX +XXX,XX @@ pic_read(void *opaque, hwaddr addr, unsigned int size) return r; } -static void -pic_write(void *opaque, hwaddr addr, - uint64_t val64, unsigned int size) +static void pic_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t value = val64; addr >>= 2; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps pic_ops = { static void irq_handler(void *opaque, int irq, int level) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; /* edge triggered interrupt */ if (p->c_kind_of_intr & (1 << irq) && p->regs[R_MER] & 2) { @@ -XXX,XX +XXX,XX @@ static void irq_handler(void *opaque, int irq, int level) static void xilinx_intc_init(Object *obj) { - struct xlx_pic *p = XILINX_INTC(obj); + XpsIntc *p = XILINX_INTC(obj); qdev_init_gpio_in(DEVICE(obj), irq_handler, 32); sysbus_init_irq(SYS_BUS_DEVICE(obj), &p->parent_irq); @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_init(Object *obj) } static Property xilinx_intc_properties[] = { - DEFINE_PROP_UINT32("kind-of-intr", struct xlx_pic, c_kind_of_intr, 0), + DEFINE_PROP_UINT32("kind-of-intr", XpsIntc, c_kind_of_intr, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_intc_info = { .name = TYPE_XILINX_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct xlx_pic), + .instance_size = sizeof(XpsIntc), .instance_init = xilinx_intc_init, .class_init = xilinx_intc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/timer/xilinx_timer.c:65:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-15-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/xilinx_timer.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xilinx_timer.c +++ b/hw/timer/xilinx_timer.c @@ -XXX,XX +XXX,XX @@ struct xlx_timer }; #define TYPE_XILINX_TIMER "xlnx.xps-timer" -DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, - TYPE_XILINX_TIMER) +typedef struct XpsTimerState XpsTimerState; +DECLARE_INSTANCE_CHECKER(XpsTimerState, XILINX_TIMER, TYPE_XILINX_TIMER) -struct timerblock +struct XpsTimerState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct timerblock struct xlx_timer *timers; }; -static inline unsigned int num_timers(struct timerblock *t) +static inline unsigned int num_timers(XpsTimerState *t) { return 2 - t->one_timer_only; } @@ -XXX,XX +XXX,XX @@ static inline unsigned int timer_from_addr(hwaddr addr) return addr >> 2; } -static void timer_update_irq(struct timerblock *t) +static void timer_update_irq(XpsTimerState *t) { unsigned int i, irq = 0; uint32_t csr; @@ -XXX,XX +XXX,XX @@ static void timer_update_irq(struct timerblock *t) static uint64_t timer_read(void *opaque, hwaddr addr, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; uint32_t r = 0; unsigned int timer; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, uint64_t val64, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; unsigned int timer; uint32_t value = val64; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps timer_ops = { static void timer_hit(void *opaque) { struct xlx_timer *xt = opaque; - struct timerblock *t = xt->parent; + XpsTimerState *t = xt->parent; D(fprintf(stderr, "%s %d\n", __func__, xt->nr)); xt->regs[R_TCSR] |= TCSR_TINT; @@ -XXX,XX +XXX,XX @@ static void timer_hit(void *opaque) static void xilinx_timer_realize(DeviceState *dev, Error **errp) { - struct timerblock *t = XILINX_TIMER(dev); + XpsTimerState *t = XILINX_TIMER(dev); unsigned int i; /* Init all the ptimers. */ @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_realize(DeviceState *dev, Error **errp) static void xilinx_timer_init(Object *obj) { - struct timerblock *t = XILINX_TIMER(obj); + XpsTimerState *t = XILINX_TIMER(obj); /* All timers share a single irq line. */ sysbus_init_irq(SYS_BUS_DEVICE(obj), &t->irq); } static Property xilinx_timer_properties[] = { - DEFINE_PROP_UINT32("clock-frequency", struct timerblock, freq_hz, - 62 * 1000000), - DEFINE_PROP_UINT8("one-timer-only", struct timerblock, one_timer_only, 0), + DEFINE_PROP_UINT32("clock-frequency", XpsTimerState, freq_hz, 62 * 1000000), + DEFINE_PROP_UINT8("one-timer-only", XpsTimerState, one_timer_only, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_timer_info = { .name = TYPE_XILINX_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct timerblock), + .instance_size = sizeof(XpsTimerState), .instance_init = xilinx_timer_init, .class_init = xilinx_timer_class_init, }; -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3 write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is enabled and exposed to the guest. As a result EL3 writes of that bit are ignored. Cc: qemu-stable@nongnu.org Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_sme, cpu)) { valid_mask |= SCR_ENTP2; } + if (cpu_isar_feature(aa64_hcx, cpu)) { + valid_mask |= SCR_HXEN; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { -- 2.34.1