Last minute pullreq for arm related patches; quite large because there were several series that only just made it through code review in time. thanks -- PMM The following changes since commit 091e3e3dbc499d84c004e1c50bc9870af37f6e99: Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-10-26' into staging (2020-10-26 22:36:35 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201027-1 for you to fetch changes up to 32bd322a0134ed89db00f2b9b3894982db3dedcb: hw/timer/armv7m_systick: Rewrite to use ptimers (2020-10-27 11:15:31 +0000) ---------------------------------------------------------------- target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer ---------------------------------------------------------------- Dr. David Alan Gilbert (1): arm/trace: Fix hex printing Hao Wu (1): hw/timer: Adding watchdog for NPCM7XX Timer. Havard Skinnemoen (4): Move npcm7xx_timer_reached_zero call out of npcm7xx_timer_pause hw/misc: Add npcm7xx random number generator hw/arm/npcm7xx: Add EHCI and OHCI controllers hw/gpio: Add GPIO model for Nuvoton NPCM7xx Luc Michel (14): hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro hw/core/clock: trace clock values in Hz instead of ns hw/arm/raspi: fix CPRMAN base address hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: add sane reset values to the registers hw/char/pl011: add a clock input hw/arm/bcm2835_peripherals: connect the UART clock Pavel Dovgalyuk (1): hw/arm: fix min_cpus for xlnx-versal-virt platform Peter Maydell (2): hw/core/ptimer: Support ptimer being disabled by timer callback hw/timer/armv7m_systick: Rewrite to use ptimers Philippe Mathieu-Daudé (10): linux-user/elfload: Avoid leaking interp_name using GLib memory API hw/arm/bcm2836: Restrict BCM283XInfo declaration to C source hw/arm/bcm2836: QOM'ify more by adding class_init() to each SoC type hw/arm/bcm2836: Introduce BCM283XClass::core_count hw/arm/bcm2836: Only provide "enabled-cpus" property to multicore SoCs hw/arm/bcm2836: Split out common realize() code hw/arm/bcm2836: Introduce the BCM2835 SoC hw/arm/raspi: Add the Raspberry Pi A+ machine hw/arm/raspi: Add the Raspberry Pi Zero machine hw/arm/raspi: Add the Raspberry Pi 3 model A+ Richard Henderson (11): linux-user/aarch64: Reset btype for signals linux-user: Set PAGE_TARGET_1 for TARGET_PROT_BTI include/elf: Add defines related to GNU property notes for AArch64 linux-user/elfload: Fix coding style in load_elf_image linux-user/elfload: Adjust iteration over phdr linux-user/elfload: Move PT_INTERP detection to first loop linux-user/elfload: Use Error for load_elf_image linux-user/elfload: Use Error for load_elf_interp linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes linux-user/elfload: Parse GNU_PROPERTY_AARCH64_FEATURE_1_AND tests/tcg/aarch64: Add bti smoke tests Shashi Mallela (2): hw/watchdog: Implement SBSA watchdog device hw/arm/sbsa-ref: add SBSA watchdog device Thomas Huth (1): hw/arm/highbank: Silence warnings about missing fallthrough statements Zenghui Yu (1): hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly docs/system/arm/nuvoton.rst | 6 +- hw/usb/hcd-ehci.h | 1 + include/elf.h | 22 + include/exec/cpu-all.h | 2 + include/hw/arm/bcm2835_peripherals.h | 5 +- include/hw/arm/bcm2836.h | 9 +- include/hw/arm/npcm7xx.h | 8 + include/hw/arm/raspi_platform.h | 5 +- include/hw/char/pl011.h | 1 + include/hw/clock.h | 5 + include/hw/gpio/npcm7xx_gpio.h | 55 ++ include/hw/misc/bcm2835_cprman.h | 210 ++++++ include/hw/misc/bcm2835_cprman_internals.h | 1019 ++++++++++++++++++++++++++++ include/hw/misc/npcm7xx_clk.h | 2 + include/hw/misc/npcm7xx_rng.h | 34 + include/hw/timer/armv7m_systick.h | 3 +- include/hw/timer/npcm7xx_timer.h | 48 +- include/hw/watchdog/sbsa_gwdt.h | 79 +++ linux-user/qemu.h | 4 + linux-user/syscall_defs.h | 4 + target/arm/cpu.h | 5 + hw/arm/bcm2835_peripherals.c | 15 +- hw/arm/bcm2836.c | 182 +++-- hw/arm/highbank.c | 2 + hw/arm/npcm7xx.c | 126 +++- hw/arm/raspi.c | 41 ++ hw/arm/sbsa-ref.c | 23 + hw/arm/smmuv3.c | 1 + hw/arm/xlnx-versal-virt.c | 1 + hw/char/pl011.c | 45 ++ hw/core/clock.c | 6 +- hw/core/ptimer.c | 4 + hw/gpio/npcm7xx_gpio.c | 424 ++++++++++++ hw/misc/bcm2835_cprman.c | 808 ++++++++++++++++++++++ hw/misc/npcm7xx_clk.c | 28 + hw/misc/npcm7xx_rng.c | 180 +++++ hw/timer/armv7m_systick.c | 124 ++-- hw/timer/npcm7xx_timer.c | 270 ++++++-- hw/usb/hcd-ehci-sysbus.c | 19 + hw/watchdog/sbsa_gwdt.c | 293 ++++++++ linux-user/aarch64/signal.c | 10 +- linux-user/elfload.c | 326 +++++++-- linux-user/mmap.c | 16 + target/arm/translate-a64.c | 6 +- tests/qtest/npcm7xx_gpio-test.c | 385 +++++++++++ tests/qtest/npcm7xx_rng-test.c | 278 ++++++++ tests/qtest/npcm7xx_watchdog_timer-test.c | 319 +++++++++ tests/tcg/aarch64/bti-1.c | 62 ++ tests/tcg/aarch64/bti-2.c | 116 ++++ tests/tcg/aarch64/bti-crt.inc.c | 51 ++ MAINTAINERS | 1 + hw/arm/Kconfig | 1 + hw/arm/trace-events | 2 +- hw/char/trace-events | 1 + hw/core/trace-events | 4 +- hw/gpio/meson.build | 1 + hw/gpio/trace-events | 7 + hw/misc/meson.build | 2 + hw/misc/trace-events | 9 + hw/watchdog/Kconfig | 3 + hw/watchdog/meson.build | 1 + tests/qtest/meson.build | 6 +- tests/tcg/aarch64/Makefile.target | 10 + tests/tcg/configure.sh | 4 + 64 files changed, 5461 insertions(+), 279 deletions(-) create mode 100644 include/hw/gpio/npcm7xx_gpio.h create mode 100644 include/hw/misc/bcm2835_cprman.h create mode 100644 include/hw/misc/bcm2835_cprman_internals.h create mode 100644 include/hw/misc/npcm7xx_rng.h create mode 100644 include/hw/watchdog/sbsa_gwdt.h create mode 100644 hw/gpio/npcm7xx_gpio.c create mode 100644 hw/misc/bcm2835_cprman.c create mode 100644 hw/misc/npcm7xx_rng.c create mode 100644 hw/watchdog/sbsa_gwdt.c create mode 100644 tests/qtest/npcm7xx_gpio-test.c create mode 100644 tests/qtest/npcm7xx_rng-test.c create mode 100644 tests/qtest/npcm7xx_watchdog_timer-test.c create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-2.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c From: Richard Henderson <richard.henderson@linaro.org> The kernel sets btype for the signal handler as if for a call. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, + offsetof(struct target_rt_frame_record, tramp); } env->xregs[0] = usig; - env->xregs[31] = frame_addr; env->xregs[29] = frame_addr + fr_ofs; - env->pc = ka->_sa_handler; env->xregs[30] = return_addr; + env->xregs[31] = frame_addr; + env->pc = ka->_sa_handler; + + /* Invoke the signal handler as if by indirect call. */ + if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { + env->btype = 2; + } + if (info) { tswap_siginfo(&frame->info, info); env->xregs[1] = frame_addr + offsetof(struct target_rt_sigframe, info); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Transform the prot bit to a qemu internal page bit, and save it in the page tables. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 2 ++ linux-user/syscall_defs.h | 4 ++++ target/arm/cpu.h | 5 +++++ linux-user/mmap.c | 16 ++++++++++++++++ target/arm/translate-a64.c | 6 +++--- 5 files changed, 30 insertions(+), 3 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; /* FIXME: Code that sets/uses this is broken and needs to go away. */ #define PAGE_RESERVED 0x0020 #endif +/* Target-specific bits that will be used via page_get_flags(). */ +#define PAGE_TARGET_1 0x0080 #if defined(CONFIG_USER_ONLY) void page_dump(FILE *f); diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall_defs.h +++ b/linux-user/syscall_defs.h @@ -XXX,XX +XXX,XX @@ struct target_winsize { #define TARGET_PROT_SEM 0x08 #endif +#ifdef TARGET_AARCH64 +#define TARGET_PROT_BTI 0x10 +#endif + /* Common */ #define TARGET_MAP_SHARED 0x01 /* Share changes */ #define TARGET_MAP_PRIVATE 0x02 /* Changes are private */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) #define arm_tlb_bti_gp(x) (typecheck_memtxattrs(x)->target_tlb_bit0) #define arm_tlb_mte_tagged(x) (typecheck_memtxattrs(x)->target_tlb_bit1) +/* + * AArch64 usage of the PAGE_TARGET_* bits for linux-user. + */ +#define PAGE_BTI PAGE_TARGET_1 + /* * Naming convention for isar_feature functions: * Functions which test 32-bit ID registers should have _aa32_ in diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ static int validate_prot_to_pageflags(int *host_prot, int prot) *host_prot = (prot & (PROT_READ | PROT_WRITE)) | (prot & PROT_EXEC ? PROT_READ : 0); +#ifdef TARGET_AARCH64 + /* + * The PROT_BTI bit is only accepted if the cpu supports the feature. + * Since this is the unusual case, don't bother checking unless + * the bit has been requested. If set and valid, record the bit + * within QEMU's page_flags. + */ + if (prot & TARGET_PROT_BTI) { + ARMCPU *cpu = ARM_CPU(thread_cpu); + if (cpu_isar_feature(aa64_bti, cpu)) { + valid |= TARGET_PROT_BTI; + page_flags |= PAGE_BTI; + } + } +#endif + return prot & ~valid ? 0 : page_flags; } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_simd_fp(DisasContext *s, uint32_t insn) */ static bool is_guarded_page(CPUARMState *env, DisasContext *s) { -#ifdef CONFIG_USER_ONLY - return false; /* FIXME */ -#else uint64_t addr = s->base.pc_first; +#ifdef CONFIG_USER_ONLY + return page_get_flags(addr) & PAGE_BTI; +#else int mmu_idx = arm_to_core_mmu_idx(s->mmu_idx); unsigned int index = tlb_index(env, mmu_idx, addr); CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These are all of the defines required to parse GNU_PROPERTY_AARCH64_FEATURE_1_AND, copied from binutils. Other missing defines related to other GNU program headers and notes are elided for now. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/elf.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/include/elf.h b/include/elf.h index XXXXXXX..XXXXXXX 100644 --- a/include/elf.h +++ b/include/elf.h @@ -XXX,XX +XXX,XX @@ typedef int64_t Elf64_Sxword; #define PT_NOTE 4 #define PT_SHLIB 5 #define PT_PHDR 6 +#define PT_LOOS 0x60000000 +#define PT_HIOS 0x6fffffff #define PT_LOPROC 0x70000000 #define PT_HIPROC 0x7fffffff +#define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) + #define PT_MIPS_REGINFO 0x70000000 #define PT_MIPS_RTPROC 0x70000001 #define PT_MIPS_OPTIONS 0x70000002 @@ -XXX,XX +XXX,XX @@ typedef struct elf64_shdr { #define NT_ARM_SYSTEM_CALL 0x404 /* ARM system call number */ #define NT_ARM_SVE 0x405 /* ARM Scalable Vector Extension regs */ +/* Defined note types for GNU systems. */ + +#define NT_GNU_PROPERTY_TYPE_0 5 /* Program property */ + +/* Values used in GNU .note.gnu.property notes (NT_GNU_PROPERTY_TYPE_0). */ + +#define GNU_PROPERTY_STACK_SIZE 1 +#define GNU_PROPERTY_NO_COPY_ON_PROTECTED 2 + +#define GNU_PROPERTY_LOPROC 0xc0000000 +#define GNU_PROPERTY_HIPROC 0xdfffffff +#define GNU_PROPERTY_LOUSER 0xe0000000 +#define GNU_PROPERTY_HIUSER 0xffffffff + +#define GNU_PROPERTY_AARCH64_FEATURE_1_AND 0xc0000000 +#define GNU_PROPERTY_AARCH64_FEATURE_1_BTI (1u << 0) +#define GNU_PROPERTY_AARCH64_FEATURE_1_PAC (1u << 1) + /* * Physical entry point into the kernel. * -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Fix an unlikely memory leak in load_elf_image(). Fixes: bf858897b7 ("linux-user: Re-use load_elf_image for the main binary.") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-5-richard.henderson@linaro.org Message-Id: <20201003174944.1972444-1-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, info->brk = vaddr_em; } } else if (eppnt->p_type == PT_INTERP && pinterp_name) { - char *interp_name; + g_autofree char *interp_name = NULL; if (*pinterp_name) { errmsg = "Multiple PT_INTERP entries"; goto exit_errmsg; } - interp_name = malloc(eppnt->p_filesz); + interp_name = g_malloc(eppnt->p_filesz); if (!interp_name) { goto exit_perror; } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, errmsg = "Invalid PT_INTERP entry"; goto exit_errmsg; } - *pinterp_name = interp_name; + *pinterp_name = g_steal_pointer(&interp_name); #ifdef TARGET_MIPS } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; @@ -XXX,XX +XXX,XX @@ int load_elf_binary(struct linux_binprm *bprm, struct image_info *info) if (elf_interpreter) { info->load_bias = interp_info.load_bias; info->entry = interp_info.entry; - free(elf_interpreter); + g_free(elf_interpreter); } #ifdef USE_ELF_CORE_DUMP -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Fixing this now will clarify following patches. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-6-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, abi_ulong vaddr, vaddr_po, vaddr_ps, vaddr_ef, vaddr_em, vaddr_len; int elf_prot = 0; - if (eppnt->p_flags & PF_R) elf_prot = PROT_READ; - if (eppnt->p_flags & PF_W) elf_prot |= PROT_WRITE; - if (eppnt->p_flags & PF_X) elf_prot |= PROT_EXEC; + if (eppnt->p_flags & PF_R) { + elf_prot |= PROT_READ; + } + if (eppnt->p_flags & PF_W) { + elf_prot |= PROT_WRITE; + } + if (eppnt->p_flags & PF_X) { + elf_prot |= PROT_EXEC; + } vaddr = load_bias + eppnt->p_vaddr; vaddr_po = TARGET_ELF_PAGEOFFSET(vaddr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The second loop uses a loop induction variable, and the first does not. Transform the first to match the second, to simplify a following patch moving code between them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-7-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, loaddr = -1, hiaddr = 0; info->alignment = 0; for (i = 0; i < ehdr->e_phnum; ++i) { - if (phdr[i].p_type == PT_LOAD) { - abi_ulong a = phdr[i].p_vaddr - phdr[i].p_offset; + struct elf_phdr *eppnt = phdr + i; + if (eppnt->p_type == PT_LOAD) { + abi_ulong a = eppnt->p_vaddr - eppnt->p_offset; if (a < loaddr) { loaddr = a; } - a = phdr[i].p_vaddr + phdr[i].p_memsz; + a = eppnt->p_vaddr + eppnt->p_memsz; if (a > hiaddr) { hiaddr = a; } ++info->nsegs; - info->alignment |= phdr[i].p_align; + info->alignment |= eppnt->p_align; } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> For BTI, we need to know if the executable is static or dynamic, which means looking for PT_INTERP earlier. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 60 +++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 29 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, mmap_lock(); - /* Find the maximum size of the image and allocate an appropriate - amount of memory to handle that. */ + /* + * Find the maximum size of the image and allocate an appropriate + * amount of memory to handle that. Locate the interpreter, if any. + */ loaddr = -1, hiaddr = 0; info->alignment = 0; for (i = 0; i < ehdr->e_phnum; ++i) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, } ++info->nsegs; info->alignment |= eppnt->p_align; + } else if (eppnt->p_type == PT_INTERP && pinterp_name) { + g_autofree char *interp_name = NULL; + + if (*pinterp_name) { + errmsg = "Multiple PT_INTERP entries"; + goto exit_errmsg; + } + interp_name = g_malloc(eppnt->p_filesz); + if (!interp_name) { + goto exit_perror; + } + + if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { + memcpy(interp_name, bprm_buf + eppnt->p_offset, + eppnt->p_filesz); + } else { + retval = pread(image_fd, interp_name, eppnt->p_filesz, + eppnt->p_offset); + if (retval != eppnt->p_filesz) { + goto exit_perror; + } + } + if (interp_name[eppnt->p_filesz - 1] != 0) { + errmsg = "Invalid PT_INTERP entry"; + goto exit_errmsg; + } + *pinterp_name = g_steal_pointer(&interp_name); } } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, if (vaddr_em > info->brk) { info->brk = vaddr_em; } - } else if (eppnt->p_type == PT_INTERP && pinterp_name) { - g_autofree char *interp_name = NULL; - - if (*pinterp_name) { - errmsg = "Multiple PT_INTERP entries"; - goto exit_errmsg; - } - interp_name = g_malloc(eppnt->p_filesz); - if (!interp_name) { - goto exit_perror; - } - - if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { - memcpy(interp_name, bprm_buf + eppnt->p_offset, - eppnt->p_filesz); - } else { - retval = pread(image_fd, interp_name, eppnt->p_filesz, - eppnt->p_offset); - if (retval != eppnt->p_filesz) { - goto exit_perror; - } - } - if (interp_name[eppnt->p_filesz - 1] != 0) { - errmsg = "Invalid PT_INTERP entry"; - goto exit_errmsg; - } - *pinterp_name = g_steal_pointer(&interp_name); #ifdef TARGET_MIPS } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is a bit clearer than open-coding some of this with a bare c string. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-9-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ #include "qemu/guest-random.h" #include "qemu/units.h" #include "qemu/selfmap.h" +#include "qapi/error.h" #ifdef _ARCH_PPC64 #undef ARCH_DLINFO @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, struct elf_phdr *phdr; abi_ulong load_addr, load_bias, loaddr, hiaddr, error; int i, retval; - const char *errmsg; + Error *err = NULL; /* First of all, some simple consistency checks */ - errmsg = "Invalid ELF image for this architecture"; if (!elf_check_ident(ehdr)) { + error_setg(&err, "Invalid ELF image for this architecture"); goto exit_errmsg; } bswap_ehdr(ehdr); if (!elf_check_ehdr(ehdr)) { + error_setg(&err, "Invalid ELF image for this architecture"); goto exit_errmsg; } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, g_autofree char *interp_name = NULL; if (*pinterp_name) { - errmsg = "Multiple PT_INTERP entries"; + error_setg(&err, "Multiple PT_INTERP entries"); goto exit_errmsg; } + interp_name = g_malloc(eppnt->p_filesz); - if (!interp_name) { - goto exit_perror; - } if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { memcpy(interp_name, bprm_buf + eppnt->p_offset, @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, retval = pread(image_fd, interp_name, eppnt->p_filesz, eppnt->p_offset); if (retval != eppnt->p_filesz) { - goto exit_perror; + goto exit_read; } } if (interp_name[eppnt->p_filesz - 1] != 0) { - errmsg = "Invalid PT_INTERP entry"; + error_setg(&err, "Invalid PT_INTERP entry"); goto exit_errmsg; } *pinterp_name = g_steal_pointer(&interp_name); @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, (ehdr->e_type == ET_EXEC ? MAP_FIXED : 0), -1, 0); if (load_addr == -1) { - goto exit_perror; + goto exit_mmap; } load_bias = load_addr - loaddr; @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, image_fd, eppnt->p_offset - vaddr_po); if (error == -1) { - goto exit_perror; + goto exit_mmap; } } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; if (eppnt->p_filesz < sizeof(Mips_elf_abiflags_v0)) { - errmsg = "Invalid PT_MIPS_ABIFLAGS entry"; + error_setg(&err, "Invalid PT_MIPS_ABIFLAGS entry"); goto exit_errmsg; } if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, retval = pread(image_fd, &abiflags, sizeof(Mips_elf_abiflags_v0), eppnt->p_offset); if (retval != sizeof(Mips_elf_abiflags_v0)) { - goto exit_perror; + goto exit_read; } } bswap_mips_abiflags(&abiflags); @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, exit_read: if (retval >= 0) { - errmsg = "Incomplete read of file header"; - goto exit_errmsg; + error_setg(&err, "Incomplete read of file header"); + } else { + error_setg_errno(&err, errno, "Error reading file header"); } - exit_perror: - errmsg = strerror(errno); + goto exit_errmsg; + exit_mmap: + error_setg_errno(&err, errno, "Error mapping file"); + goto exit_errmsg; exit_errmsg: - fprintf(stderr, "%s: %s\n", image_name, errmsg); + error_reportf_err(err, "%s: ", image_name); exit(-1); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is slightly clearer than just using strerror, though the different forms produced by error_setg_file_open and error_setg_errno isn't entirely convenient. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-10-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_interp(const char *filename, struct image_info *info, char bprm_buf[BPRM_BUF_SIZE]) { int fd, retval; + Error *err = NULL; fd = open(path(filename), O_RDONLY); if (fd < 0) { - goto exit_perror; + error_setg_file_open(&err, errno, filename); + error_report_err(err); + exit(-1); } retval = read(fd, bprm_buf, BPRM_BUF_SIZE); if (retval < 0) { - goto exit_perror; + error_setg_errno(&err, errno, "Error reading file header"); + error_reportf_err(err, "%s: ", filename); + exit(-1); } + if (retval < BPRM_BUF_SIZE) { memset(bprm_buf + retval, 0, BPRM_BUF_SIZE - retval); } load_elf_image(filename, fd, info, NULL, bprm_buf); - return; - - exit_perror: - fprintf(stderr, "%s: %s\n", filename, strerror(errno)); - exit(-1); } static int symfind(const void *s0, const void *s1) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is generic support, with the code disabled for all targets. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-11-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 4 ++ linux-user/elfload.c | 157 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 161 insertions(+) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ struct image_info { abi_ulong interpreter_loadmap_addr; abi_ulong interpreter_pt_dynamic_addr; struct image_info *other_info; + + /* For target-specific processing of NT_GNU_PROPERTY_TYPE_0. */ + uint32_t note_flags; + #ifdef TARGET_MIPS int fp_abi; int interp_fp_abi; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void elf_core_copy_regs(target_elf_gregset_t *regs, #include "elf.h" +static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, + const uint32_t *data, + struct image_info *info, + Error **errp) +{ + g_assert_not_reached(); +} +#define ARCH_USE_GNU_PROPERTY 0 + struct exec { unsigned int a_info; /* Use macros N_MAGIC, etc for access */ @@ -XXX,XX +XXX,XX @@ void probe_guest_base(const char *image_name, abi_ulong guest_loaddr, "@ 0x%" PRIx64 "\n", (uint64_t)guest_base); } +enum { + /* The string "GNU\0" as a magic number. */ + GNU0_MAGIC = const_le32('G' | 'N' << 8 | 'U' << 16), + NOTE_DATA_SZ = 1 * KiB, + NOTE_NAME_SZ = 4, + ELF_GNU_PROPERTY_ALIGN = ELF_CLASS == ELFCLASS32 ? 4 : 8, +}; + +/* + * Process a single gnu_property entry. + * Return false for error. + */ +static bool parse_elf_property(const uint32_t *data, int *off, int datasz, + struct image_info *info, bool have_prev_type, + uint32_t *prev_type, Error **errp) +{ + uint32_t pr_type, pr_datasz, step; + + if (*off > datasz || !QEMU_IS_ALIGNED(*off, ELF_GNU_PROPERTY_ALIGN)) { + goto error_data; + } + datasz -= *off; + data += *off / sizeof(uint32_t); + + if (datasz < 2 * sizeof(uint32_t)) { + goto error_data; + } + pr_type = data[0]; + pr_datasz = data[1]; + data += 2; + datasz -= 2 * sizeof(uint32_t); + step = ROUND_UP(pr_datasz, ELF_GNU_PROPERTY_ALIGN); + if (step > datasz) { + goto error_data; + } + + /* Properties are supposed to be unique and sorted on pr_type. */ + if (have_prev_type && pr_type <= *prev_type) { + if (pr_type == *prev_type) { + error_setg(errp, "Duplicate property in PT_GNU_PROPERTY"); + } else { + error_setg(errp, "Unsorted property in PT_GNU_PROPERTY"); + } + return false; + } + *prev_type = pr_type; + + if (!arch_parse_elf_property(pr_type, pr_datasz, data, info, errp)) { + return false; + } + + *off += 2 * sizeof(uint32_t) + step; + return true; + + error_data: + error_setg(errp, "Ill-formed property in PT_GNU_PROPERTY"); + return false; +} + +/* Process NT_GNU_PROPERTY_TYPE_0. */ +static bool parse_elf_properties(int image_fd, + struct image_info *info, + const struct elf_phdr *phdr, + char bprm_buf[BPRM_BUF_SIZE], + Error **errp) +{ + union { + struct elf_note nhdr; + uint32_t data[NOTE_DATA_SZ / sizeof(uint32_t)]; + } note; + + int n, off, datasz; + bool have_prev_type; + uint32_t prev_type; + + /* Unless the arch requires properties, ignore them. */ + if (!ARCH_USE_GNU_PROPERTY) { + return true; + } + + /* If the properties are crazy large, that's too bad. */ + n = phdr->p_filesz; + if (n > sizeof(note)) { + error_setg(errp, "PT_GNU_PROPERTY too large"); + return false; + } + if (n < sizeof(note.nhdr)) { + error_setg(errp, "PT_GNU_PROPERTY too small"); + return false; + } + + if (phdr->p_offset + n <= BPRM_BUF_SIZE) { + memcpy(&note, bprm_buf + phdr->p_offset, n); + } else { + ssize_t len = pread(image_fd, &note, n, phdr->p_offset); + if (len != n) { + error_setg_errno(errp, errno, "Error reading file header"); + return false; + } + } + + /* + * The contents of a valid PT_GNU_PROPERTY is a sequence + * of uint32_t -- swap them all now. + */ +#ifdef BSWAP_NEEDED + for (int i = 0; i < n / 4; i++) { + bswap32s(note.data + i); + } +#endif + + /* + * Note that nhdr is 3 words, and that the "name" described by namesz + * immediately follows nhdr and is thus at the 4th word. Further, all + * of the inputs to the kernel's round_up are multiples of 4. + */ + if (note.nhdr.n_type != NT_GNU_PROPERTY_TYPE_0 || + note.nhdr.n_namesz != NOTE_NAME_SZ || + note.data[3] != GNU0_MAGIC) { + error_setg(errp, "Invalid note in PT_GNU_PROPERTY"); + return false; + } + off = sizeof(note.nhdr) + NOTE_NAME_SZ; + + datasz = note.nhdr.n_descsz + off; + if (datasz > n) { + error_setg(errp, "Invalid note size in PT_GNU_PROPERTY"); + return false; + } + + have_prev_type = false; + prev_type = 0; + while (1) { + if (off == datasz) { + return true; /* end, exit ok */ + } + if (!parse_elf_property(note.data, &off, datasz, info, + have_prev_type, &prev_type, errp)) { + return false; + } + have_prev_type = true; + } +} + /* Load an ELF image into the address space. IMAGE_NAME is the filename of the image, to use in error messages. @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, goto exit_errmsg; } *pinterp_name = g_steal_pointer(&interp_name); + } else if (eppnt->p_type == PT_GNU_PROPERTY) { + if (!parse_elf_properties(image_fd, info, eppnt, bprm_buf, &err)) { + goto exit_errmsg; + } } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use the new generic support for NT_GNU_PROPERTY_TYPE_0. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 48 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void elf_core_copy_regs(target_elf_gregset_t *regs, #include "elf.h" +/* We must delay the following stanzas until after "elf.h". */ +#if defined(TARGET_AARCH64) + +static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, + const uint32_t *data, + struct image_info *info, + Error **errp) +{ + if (pr_type == GNU_PROPERTY_AARCH64_FEATURE_1_AND) { + if (pr_datasz != sizeof(uint32_t)) { + error_setg(errp, "Ill-formed GNU_PROPERTY_AARCH64_FEATURE_1_AND"); + return false; + } + /* We will extract GNU_PROPERTY_AARCH64_FEATURE_1_BTI later. */ + info->note_flags = *data; + } + return true; +} +#define ARCH_USE_GNU_PROPERTY 1 + +#else + static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, const uint32_t *data, struct image_info *info, @@ -XXX,XX +XXX,XX @@ static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, } #define ARCH_USE_GNU_PROPERTY 0 +#endif + struct exec { unsigned int a_info; /* Use macros N_MAGIC, etc for access */ @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, struct elfhdr *ehdr = (struct elfhdr *)bprm_buf; struct elf_phdr *phdr; abi_ulong load_addr, load_bias, loaddr, hiaddr, error; - int i, retval; + int i, retval, prot_exec; Error *err = NULL; /* First of all, some simple consistency checks */ @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, info->brk = 0; info->elf_flags = ehdr->e_flags; + prot_exec = PROT_EXEC; +#ifdef TARGET_AARCH64 + /* + * If the BTI feature is present, this indicates that the executable + * pages of the startup binary should be mapped with PROT_BTI, so that + * branch targets are enforced. + * + * The startup binary is either the interpreter or the static executable. + * The interpreter is responsible for all pages of a dynamic executable. + * + * Elf notes are backward compatible to older cpus. + * Do not enable BTI unless it is supported. + */ + if ((info->note_flags & GNU_PROPERTY_AARCH64_FEATURE_1_BTI) + && (pinterp_name == NULL || *pinterp_name == 0) + && cpu_isar_feature(aa64_bti, ARM_CPU(thread_cpu))) { + prot_exec |= TARGET_PROT_BTI; + } +#endif + for (i = 0; i < ehdr->e_phnum; i++) { struct elf_phdr *eppnt = phdr + i; if (eppnt->p_type == PT_LOAD) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, elf_prot |= PROT_WRITE; } if (eppnt->p_flags & PF_X) { - elf_prot |= PROT_EXEC; + elf_prot |= prot_exec; } vaddr = load_bias + eppnt->p_vaddr; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The note test requires gcc 10 for -mbranch-protection=standard. The mmap test uses PROT_BTI and does not require special compiler support. Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/bti-1.c | 62 ++++++++++++++++ tests/tcg/aarch64/bti-2.c | 116 ++++++++++++++++++++++++++++++ tests/tcg/aarch64/bti-crt.inc.c | 51 +++++++++++++ tests/tcg/aarch64/Makefile.target | 10 +++ tests/tcg/configure.sh | 4 ++ 5 files changed, 243 insertions(+) create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-2.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c diff --git a/tests/tcg/aarch64/bti-1.c b/tests/tcg/aarch64/bti-1.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-1.c @@ -XXX,XX +XXX,XX @@ +/* + * Branch target identification, basic notskip cases. + */ + +#include "bti-crt.inc.c" + +static void skip2_sigill(int sig, siginfo_t *info, ucontext_t *uc) +{ + uc->uc_mcontext.pc += 8; + uc->uc_mcontext.pstate = 1; +} + +#define NOP "nop" +#define BTI_N "hint #32" +#define BTI_C "hint #34" +#define BTI_J "hint #36" +#define BTI_JC "hint #38" + +#define BTYPE_1(DEST) \ + asm("mov %0,#1; adr x16, 1f; br x16; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x16") + +#define BTYPE_2(DEST) \ + asm("mov %0,#1; adr x16, 1f; blr x16; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x16", "x30") + +#define BTYPE_3(DEST) \ + asm("mov %0,#1; adr x15, 1f; br x15; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x15") + +#define TEST(WHICH, DEST, EXPECT) \ + do { WHICH(DEST); fail += skipped ^ EXPECT; } while (0) + + +int main() +{ + int fail = 0; + int skipped; + + /* Signal-like with SA_SIGINFO. */ + signal_info(SIGILL, skip2_sigill); + + TEST(BTYPE_1, NOP, 1); + TEST(BTYPE_1, BTI_N, 1); + TEST(BTYPE_1, BTI_C, 0); + TEST(BTYPE_1, BTI_J, 0); + TEST(BTYPE_1, BTI_JC, 0); + + TEST(BTYPE_2, NOP, 1); + TEST(BTYPE_2, BTI_N, 1); + TEST(BTYPE_2, BTI_C, 0); + TEST(BTYPE_2, BTI_J, 1); + TEST(BTYPE_2, BTI_JC, 0); + + TEST(BTYPE_3, NOP, 1); + TEST(BTYPE_3, BTI_N, 1); + TEST(BTYPE_3, BTI_C, 1); + TEST(BTYPE_3, BTI_J, 0); + TEST(BTYPE_3, BTI_JC, 0); + + return fail; +} diff --git a/tests/tcg/aarch64/bti-2.c b/tests/tcg/aarch64/bti-2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-2.c @@ -XXX,XX +XXX,XX @@ +/* + * Branch target identification, basic notskip cases. + */ + +#include <stdio.h> +#include <signal.h> +#include <string.h> +#include <unistd.h> +#include <sys/mman.h> + +#ifndef PROT_BTI +#define PROT_BTI 0x10 +#endif + +static void skip2_sigill(int sig, siginfo_t *info, void *vuc) +{ + ucontext_t *uc = vuc; + uc->uc_mcontext.pc += 8; + uc->uc_mcontext.pstate = 1; +} + +#define NOP "nop" +#define BTI_N "hint #32" +#define BTI_C "hint #34" +#define BTI_J "hint #36" +#define BTI_JC "hint #38" + +#define BTYPE_1(DEST) \ + "mov x1, #1\n\t" \ + "adr x16, 1f\n\t" \ + "br x16\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define BTYPE_2(DEST) \ + "mov x1, #1\n\t" \ + "adr x16, 1f\n\t" \ + "blr x16\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define BTYPE_3(DEST) \ + "mov x1, #1\n\t" \ + "adr x15, 1f\n\t" \ + "br x15\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define TEST(WHICH, DEST, EXPECT) \ + WHICH(DEST) "\n" \ + ".if " #EXPECT "\n\t" \ + "eor x1, x1," #EXPECT "\n" \ + ".endif\n\t" \ + "add x0, x0, x1\n\t" + +asm("\n" +"test_begin:\n\t" + BTI_C "\n\t" + "mov x2, x30\n\t" + "mov x0, #0\n\t" + + TEST(BTYPE_1, NOP, 1) + TEST(BTYPE_1, BTI_N, 1) + TEST(BTYPE_1, BTI_C, 0) + TEST(BTYPE_1, BTI_J, 0) + TEST(BTYPE_1, BTI_JC, 0) + + TEST(BTYPE_2, NOP, 1) + TEST(BTYPE_2, BTI_N, 1) + TEST(BTYPE_2, BTI_C, 0) + TEST(BTYPE_2, BTI_J, 1) + TEST(BTYPE_2, BTI_JC, 0) + + TEST(BTYPE_3, NOP, 1) + TEST(BTYPE_3, BTI_N, 1) + TEST(BTYPE_3, BTI_C, 1) + TEST(BTYPE_3, BTI_J, 0) + TEST(BTYPE_3, BTI_JC, 0) + + "ret x2\n" +"test_end:" +); + +int main() +{ + struct sigaction sa; + void *tb, *te; + + void *p = mmap(0, getpagesize(), + PROT_EXEC | PROT_READ | PROT_WRITE | PROT_BTI, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (p == MAP_FAILED) { + perror("mmap"); + return 1; + } + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = skip2_sigill; + sa.sa_flags = SA_SIGINFO; + if (sigaction(SIGILL, &sa, NULL) < 0) { + perror("sigaction"); + return 1; + } + + /* + * ??? With "extern char test_begin[]", some compiler versions + * will use :got references, and some linker versions will + * resolve this reference to a static symbol incorrectly. + * Bypass this error by using a pc-relative reference directly. + */ + asm("adr %0, test_begin; adr %1, test_end" : "=r"(tb), "=r"(te)); + + memcpy(p, tb, te - tb); + + return ((int (*)(void))p)(); +} diff --git a/tests/tcg/aarch64/bti-crt.inc.c b/tests/tcg/aarch64/bti-crt.inc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-crt.inc.c @@ -XXX,XX +XXX,XX @@ +/* + * Minimal user-environment for testing BTI. + * + * Normal libc is not (yet) built with BTI support enabled, + * and so could generate a BTI TRAP before ever reaching main. + */ + +#include <stdlib.h> +#include <signal.h> +#include <ucontext.h> +#include <asm/unistd.h> + +int main(void); + +void _start(void) +{ + exit(main()); +} + +void exit(int ret) +{ + register int x0 __asm__("x0") = ret; + register int x8 __asm__("x8") = __NR_exit; + + asm volatile("svc #0" : : "r"(x0), "r"(x8)); + __builtin_unreachable(); +} + +/* + * Irritatingly, the user API struct sigaction does not match the + * kernel API struct sigaction. So for simplicity, isolate the + * kernel ABI here, and make this act like signal. + */ +void signal_info(int sig, void (*fn)(int, siginfo_t *, ucontext_t *)) +{ + struct kernel_sigaction { + void (*handler)(int, siginfo_t *, ucontext_t *); + unsigned long flags; + unsigned long restorer; + unsigned long mask; + } sa = { fn, SA_SIGINFO, 0, 0 }; + + register int x0 __asm__("x0") = sig; + register void *x1 __asm__("x1") = &sa; + register void *x2 __asm__("x2") = 0; + register int x3 __asm__("x3") = sizeof(unsigned long); + register int x8 __asm__("x8") = __NR_rt_sigaction; + + asm volatile("svc #0" + : : "r"(x0), "r"(x1), "r"(x2), "r"(x3), "r"(x8) : "memory"); +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ run-pauth-%: QEMU_OPTS += -cpu max run-plugin-pauth-%: QEMU_OPTS += -cpu max endif +# BTI Tests +# bti-1 tests the elf notes, so we require special compiler support. +ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_BTI),) +AARCH64_TESTS += bti-1 +bti-1: CFLAGS += -mbranch-protection=standard +bti-1: LDFLAGS += -nostdlib +endif +# bti-2 tests PROT_BTI, so no special compiler support required. +AARCH64_TESTS += bti-2 + # Semihosting smoke test for linux-user AARCH64_TESTS += semihosting run-semihosting: semihosting diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh index XXXXXXX..XXXXXXX 100755 --- a/tests/tcg/configure.sh +++ b/tests/tcg/configure.sh @@ -XXX,XX +XXX,XX @@ for target in $target_list; do -march=armv8.3-a -o $TMPE $TMPC; then echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak fi + if do_compiler "$target_compiler" $target_compiler_cflags \ + -mbranch-protection=standard -o $TMPE $TMPC; then + echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak + fi ;; esac -- 2.20.1 From: Thomas Huth <thuth@redhat.com> When compiling with -Werror=implicit-fallthrough, gcc complains about missing fallthrough annotations in this file. Looking at the code, the fallthrough is very likely intended here, so add some comments to silence the compiler warnings. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 20201020105938.23209-1-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/highbank.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ static void hb_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x30, 0, MEMTXATTRS_UNSPECIFIED, NULL); + /* fallthrough */ case 3: address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x20, 0, MEMTXATTRS_UNSPECIFIED, NULL); + /* fallthrough */ case 2: address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x10, 0, -- 2.20.1 From: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> This patch sets min_cpus field for xlnx-versal-virt platform, because it always creates XLNX_VERSAL_NR_ACPUS cpus even with -smp 1 command line option. Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 160343854912.8460.17915238517799132371.stgit@pasha-ThinkPad-X280 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-versal-virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void versal_virt_machine_class_init(ObjectClass *oc, void *data) mc->desc = "Xilinx Versal Virtual development board"; mc->init = versal_virt_init; + mc->min_cpus = XLNX_VERSAL_NR_ACPUS; mc->max_cpus = XLNX_VERSAL_NR_ACPUS; mc->default_cpus = XLNX_VERSAL_NR_ACPUS; mc->no_cdrom = true; -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> This allows us to reuse npcm7xx_timer_pause for the watchdog timer. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/npcm7xx_timer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_pause(NPCM7xxTimer *t) timer_del(&t->qtimer); now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); t->remaining_ns = t->expires_ns - now; - if (t->remaining_ns <= 0) { - npcm7xx_timer_reached_zero(t); - } } /* @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) } else { t->tcsr &= ~NPCM7XX_TCSR_CACT; npcm7xx_timer_pause(t); + if (t->remaining_ns <= 0) { + npcm7xx_timer_reached_zero(t); + } } } } -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm7xx_clk.h | 2 + include/hw/timer/npcm7xx_timer.h | 48 +++- hw/arm/npcm7xx.c | 12 + hw/misc/npcm7xx_clk.c | 28 ++ hw/timer/npcm7xx_timer.c | 266 ++++++++++++++---- tests/qtest/npcm7xx_watchdog_timer-test.c | 319 ++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 2 +- 8 files changed, 624 insertions(+), 54 deletions(-) create mode 100644 tests/qtest/npcm7xx_watchdog_timer-test.c diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_CLK_NR_REGS (0x70 / sizeof(uint32_t)) +#define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in" + typedef struct NPCM7xxCLKState { SysBusDevice parent; diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/npcm7xx_timer.h +++ b/include/hw/timer/npcm7xx_timer.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_TIMER_NR_REGS (0x54 / sizeof(uint32_t)) +/* The basic watchdog timer period is 2^14 clock cycles. */ +#define NPCM7XX_WATCHDOG_BASETIME_SHIFT 14 + +#define NPCM7XX_WATCHDOG_RESET_GPIO_OUT "npcm7xx-clk-watchdog-reset-gpio-out" + typedef struct NPCM7xxTimerCtrlState NPCM7xxTimerCtrlState; /** - * struct NPCM7xxTimer - Individual timer state. - * @irq: GIC interrupt line to fire on expiration (if enabled). + * struct NPCM7xxBaseTimer - Basic functionality that both regular timer and + * watchdog timer use. * @qtimer: QEMU timer that notifies us on expiration. * @expires_ns: Absolute virtual expiration time. * @remaining_ns: Remaining time until expiration if timer is paused. + */ +typedef struct NPCM7xxBaseTimer { + QEMUTimer qtimer; + int64_t expires_ns; + int64_t remaining_ns; +} NPCM7xxBaseTimer; + +/** + * struct NPCM7xxTimer - Individual timer state. + * @ctrl: The timer module that owns this timer. + * @irq: GIC interrupt line to fire on expiration (if enabled). + * @base_timer: The basic timer functionality for this timer. * @tcsr: The Timer Control and Status Register. * @ticr: The Timer Initial Count Register. */ @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxTimer { NPCM7xxTimerCtrlState *ctrl; qemu_irq irq; - QEMUTimer qtimer; - int64_t expires_ns; - int64_t remaining_ns; + NPCM7xxBaseTimer base_timer; uint32_t tcsr; uint32_t ticr; } NPCM7xxTimer; +/** + * struct NPCM7xxWatchdogTimer - The watchdog timer state. + * @ctrl: The timer module that owns this timer. + * @irq: GIC interrupt line to fire on expiration (if enabled). + * @reset_signal: The GPIO used to send a reset signal. + * @base_timer: The basic timer functionality for this timer. + * @wtcr: The Watchdog Timer Control Register. + */ +typedef struct NPCM7xxWatchdogTimer { + NPCM7xxTimerCtrlState *ctrl; + + qemu_irq irq; + qemu_irq reset_signal; + NPCM7xxBaseTimer base_timer; + + uint32_t wtcr; +} NPCM7xxWatchdogTimer; + /** * struct NPCM7xxTimerCtrlState - Timer Module device state. * @parent: System bus device. * @iomem: Memory region through which registers are accessed. + * @index: The index of this timer module. * @tisr: The Timer Interrupt Status Register. - * @wtcr: The Watchdog Timer Control Register. * @timer: The five individual timers managed by this module. + * @watchdog_timer: The watchdog timer managed by this module. */ struct NPCM7xxTimerCtrlState { SysBusDevice parent; @@ -XXX,XX +XXX,XX @@ struct NPCM7xxTimerCtrlState { MemoryRegion iomem; uint32_t tisr; - uint32_t wtcr; NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL]; + NPCM7xxWatchdogTimer watchdog_timer; }; #define TYPE_NPCM7XX_TIMER "npcm7xx-timer" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_TIMER12_IRQ, NPCM7XX_TIMER13_IRQ, NPCM7XX_TIMER14_IRQ, + NPCM7XX_WDG0_IRQ = 47, /* Timer Module 0 Watchdog */ + NPCM7XX_WDG1_IRQ, /* Timer Module 1 Watchdog */ + NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) qemu_irq irq = npcm7xx_irq(s, first_irq + j); sysbus_connect_irq(sbd, j, irq); } + + /* IRQ for watchdogs */ + sysbus_connect_irq(sbd, NPCM7XX_TIMERS_PER_CTRL, + npcm7xx_irq(s, NPCM7XX_WDG0_IRQ + i)); + /* GPIO that connects clk module with watchdog */ + qdev_connect_gpio_out_named(DEVICE(&s->tim[i]), + NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 0, + qdev_get_gpio_in_named(DEVICE(&s->clk), + NPCM7XX_WATCHDOG_RESET_GPIO_IN, i)); } /* UART0..3 (16550 compatible) */ diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/misc/npcm7xx_clk.h" +#include "hw/timer/npcm7xx_timer.h" #include "migration/vmstate.h" #include "qemu/error-report.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qemu/units.h" #include "trace.h" +#include "sysemu/watchdog.h" #define PLLCON_LOKI BIT(31) #define PLLCON_LOKS BIT(30) @@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = { [NPCM7XX_CLK_AHBCKFI] = 0x000000c8, }; +/* Register Field Definitions */ +#define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex A9 Cores */ + +/* The number of watchdogs that can trigger a reset. */ +#define NPCM7XX_NR_WATCHDOGS (3) + static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset, s->regs[reg] = value; } +/* Perform reset action triggered by a watchdog */ +static void npcm7xx_clk_perform_watchdog_reset(void *opaque, int n, + int level) +{ + NPCM7xxCLKState *clk = NPCM7XX_CLK(opaque); + uint32_t rcr; + + g_assert(n >= 0 && n <= NPCM7XX_NR_WATCHDOGS); + rcr = clk->regs[NPCM7XX_CLK_WD0RCR + n]; + if (rcr & NPCM7XX_CLK_WDRCR_CA9C) { + watchdog_perform_action(); + } else { + qemu_log_mask(LOG_UNIMP, + "%s: only CPU reset is implemented. (requested 0x%" PRIx32")\n", + __func__, rcr); + } +} + static const struct MemoryRegionOps npcm7xx_clk_ops = { .read = npcm7xx_clk_read, .write = npcm7xx_clk_write, @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj) memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s, TYPE_NPCM7XX_CLK, 4 * KiB); sysbus_init_mmio(&s->parent, &s->iomem); + qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset, + NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS); } static const VMStateDescription vmstate_npcm7xx_clk = { diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/irq.h" +#include "hw/qdev-properties.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/timer/npcm7xx_timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ enum NPCM7xxTimerRegisters { #define NPCM7XX_TCSR_PRESCALE_START 0 #define NPCM7XX_TCSR_PRESCALE_LEN 8 +#define NPCM7XX_WTCR_WTCLK(rv) extract32(rv, 10, 2) +#define NPCM7XX_WTCR_FREEZE_EN BIT(9) +#define NPCM7XX_WTCR_WTE BIT(7) +#define NPCM7XX_WTCR_WTIE BIT(6) +#define NPCM7XX_WTCR_WTIS(rv) extract32(rv, 4, 2) +#define NPCM7XX_WTCR_WTIF BIT(3) +#define NPCM7XX_WTCR_WTRF BIT(2) +#define NPCM7XX_WTCR_WTRE BIT(1) +#define NPCM7XX_WTCR_WTR BIT(0) + +/* + * The number of clock cycles between interrupt and reset in watchdog, used + * by the software to handle the interrupt before system is reset. + */ +#define NPCM7XX_WATCHDOG_INTERRUPT_TO_RESET_CYCLES 1024 + +/* Start or resume the timer. */ +static void npcm7xx_timer_start(NPCM7xxBaseTimer *t) +{ + int64_t now; + + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + t->expires_ns = now + t->remaining_ns; + timer_mod(&t->qtimer, t->expires_ns); +} + +/* Stop counting. Record the time remaining so we can continue later. */ +static void npcm7xx_timer_pause(NPCM7xxBaseTimer *t) +{ + int64_t now; + + timer_del(&t->qtimer); + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + t->remaining_ns = t->expires_ns - now; +} + +/* Delete the timer and reset it to default state. */ +static void npcm7xx_timer_clear(NPCM7xxBaseTimer *t) +{ + timer_del(&t->qtimer); + t->expires_ns = 0; + t->remaining_ns = 0; +} + /* * Returns the index of timer in the tc->timer array. This can be used to * locate the registers that belong to this timer. @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) return count; } +static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t) +{ + switch (NPCM7XX_WTCR_WTCLK(t->wtcr)) { + case 0: + return 1; + case 1: + return 256; + case 2: + return 2048; + case 3: + return 65536; + default: + g_assert_not_reached(); + } +} + +static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t, + int64_t cycles) +{ + uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t); + int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles; + + /* + * The reset function always clears the current timer. The caller of the + * this needs to decide whether to start the watchdog timer based on + * specific flag in WTCR. + */ + npcm7xx_timer_clear(&t->base_timer); + + ns *= prescaler; + t->base_timer.remaining_ns = ns; +} + +static void npcm7xx_watchdog_timer_reset(NPCM7xxWatchdogTimer *t) +{ + int64_t cycles = 1; + uint32_t s = NPCM7XX_WTCR_WTIS(t->wtcr); + + g_assert(s <= 3); + + cycles <<= NPCM7XX_WATCHDOG_BASETIME_SHIFT; + cycles <<= 2 * s; + + npcm7xx_watchdog_timer_reset_cycles(t, cycles); +} + /* * Raise the interrupt line if there's a pending interrupt and interrupts are * enabled for this timer. If not, lower it. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_check_interrupt(NPCM7xxTimer *t) trace_npcm7xx_timer_irq(DEVICE(tc)->canonical_path, index, pending); } -/* Start or resume the timer. */ -static void npcm7xx_timer_start(NPCM7xxTimer *t) -{ - int64_t now; - - now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - t->expires_ns = now + t->remaining_ns; - timer_mod(&t->qtimer, t->expires_ns); -} - /* * Called when the counter reaches zero. Sets the interrupt flag, and either * restarts or disables the timer. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t) tc->tisr |= BIT(index); if (t->tcsr & NPCM7XX_TCSR_PERIODIC) { - t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); if (t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } else { t->tcsr &= ~(NPCM7XX_TCSR_CEN | NPCM7XX_TCSR_CACT); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t) npcm7xx_timer_check_interrupt(t); } -/* Stop counting. Record the time remaining so we can continue later. */ -static void npcm7xx_timer_pause(NPCM7xxTimer *t) -{ - int64_t now; - - timer_del(&t->qtimer); - now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - t->remaining_ns = t->expires_ns - now; -} /* * Restart the timer from its initial value. If the timer was enabled and stays @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_pause(NPCM7xxTimer *t) */ static void npcm7xx_timer_restart(NPCM7xxTimer *t, uint32_t old_tcsr) { - t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_timer_read_tdr(NPCM7xxTimer *t) if (t->tcsr & NPCM7XX_TCSR_CEN) { int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - return npcm7xx_timer_ns_to_count(t, t->expires_ns - now); + return npcm7xx_timer_ns_to_count(t, t->base_timer.expires_ns - now); } - return npcm7xx_timer_ns_to_count(t, t->remaining_ns); + return npcm7xx_timer_ns_to_count(t, t->base_timer.remaining_ns); } static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) if (npcm7xx_tcsr_prescaler(old_tcsr) != npcm7xx_tcsr_prescaler(new_tcsr)) { /* Recalculate time remaining based on the current TDR value. */ - t->remaining_ns = npcm7xx_timer_count_to_ns(t, tdr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, tdr); if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_CEN) { if (new_tcsr & NPCM7XX_TCSR_CEN) { t->tcsr |= NPCM7XX_TCSR_CACT; - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } else { t->tcsr &= ~NPCM7XX_TCSR_CACT; - npcm7xx_timer_pause(t); - if (t->remaining_ns <= 0) { + npcm7xx_timer_pause(&t->base_timer); + if (t->base_timer.remaining_ns <= 0) { npcm7xx_timer_reached_zero(t); } } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tisr(NPCM7xxTimerCtrlState *s, uint32_t value) if (value & (1U << i)) { npcm7xx_timer_check_interrupt(&s->timer[i]); } + } } +static void npcm7xx_timer_write_wtcr(NPCM7xxWatchdogTimer *t, uint32_t new_wtcr) +{ + uint32_t old_wtcr = t->wtcr; + + /* + * WTIF and WTRF are cleared by writing 1. Writing 0 makes these bits + * unchanged. + */ + if (new_wtcr & NPCM7XX_WTCR_WTIF) { + new_wtcr &= ~NPCM7XX_WTCR_WTIF; + } else if (old_wtcr & NPCM7XX_WTCR_WTIF) { + new_wtcr |= NPCM7XX_WTCR_WTIF; + } + if (new_wtcr & NPCM7XX_WTCR_WTRF) { + new_wtcr &= ~NPCM7XX_WTCR_WTRF; + } else if (old_wtcr & NPCM7XX_WTCR_WTRF) { + new_wtcr |= NPCM7XX_WTCR_WTRF; + } + + t->wtcr = new_wtcr; + + if (new_wtcr & NPCM7XX_WTCR_WTR) { + t->wtcr &= ~NPCM7XX_WTCR_WTR; + npcm7xx_watchdog_timer_reset(t); + if (new_wtcr & NPCM7XX_WTCR_WTE) { + npcm7xx_timer_start(&t->base_timer); + } + } else if ((old_wtcr ^ new_wtcr) & NPCM7XX_WTCR_WTE) { + if (new_wtcr & NPCM7XX_WTCR_WTE) { + npcm7xx_timer_start(&t->base_timer); + } else { + npcm7xx_timer_pause(&t->base_timer); + } + } + +} + static hwaddr npcm7xx_tcsr_index(hwaddr reg) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_timer_read(void *opaque, hwaddr offset, unsigned size) break; case NPCM7XX_TIMER_WTCR: - value = s->wtcr; + value = s->watchdog_timer.wtcr; break; default: @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write(void *opaque, hwaddr offset, return; case NPCM7XX_TIMER_WTCR: - qemu_log_mask(LOG_UNIMP, "%s: WTCR write not implemented: 0x%08x\n", - __func__, value); + npcm7xx_timer_write_wtcr(&s->watchdog_timer, value); return; } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_enter_reset(Object *obj, ResetType type) for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { NPCM7xxTimer *t = &s->timer[i]; - timer_del(&t->qtimer); - t->expires_ns = 0; - t->remaining_ns = 0; + npcm7xx_timer_clear(&t->base_timer); t->tcsr = 0x00000005; t->ticr = 0x00000000; } s->tisr = 0x00000000; - s->wtcr = 0x00000400; + /* + * Set WTCLK to 1(default) and reset all flags except WTRF. + * WTRF is not reset during a core domain reset. + */ + s->watchdog_timer.wtcr = 0x00000400 | (s->watchdog_timer.wtcr & + NPCM7XX_WTCR_WTRF); +} + +static void npcm7xx_watchdog_timer_expired(void *opaque) +{ + NPCM7xxWatchdogTimer *t = opaque; + + if (t->wtcr & NPCM7XX_WTCR_WTE) { + if (t->wtcr & NPCM7XX_WTCR_WTIF) { + if (t->wtcr & NPCM7XX_WTCR_WTRE) { + t->wtcr |= NPCM7XX_WTCR_WTRF; + /* send reset signal to CLK module*/ + qemu_irq_raise(t->reset_signal); + } + } else { + t->wtcr |= NPCM7XX_WTCR_WTIF; + if (t->wtcr & NPCM7XX_WTCR_WTIE) { + /* send interrupt */ + qemu_irq_raise(t->irq); + } + npcm7xx_watchdog_timer_reset_cycles(t, + NPCM7XX_WATCHDOG_INTERRUPT_TO_RESET_CYCLES); + npcm7xx_timer_start(&t->base_timer); + } + } } static void npcm7xx_timer_hold_reset(Object *obj) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_hold_reset(Object *obj) for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { qemu_irq_lower(s->timer[i].irq); } + qemu_irq_lower(s->watchdog_timer.irq); } static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev); SysBusDevice *sbd = &s->parent; int i; + NPCM7xxWatchdogTimer *w; for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { NPCM7xxTimer *t = &s->timer[i]; t->ctrl = s; - timer_init_ns(&t->qtimer, QEMU_CLOCK_VIRTUAL, npcm7xx_timer_expired, t); + timer_init_ns(&t->base_timer.qtimer, QEMU_CLOCK_VIRTUAL, + npcm7xx_timer_expired, t); sysbus_init_irq(sbd, &t->irq); } + w = &s->watchdog_timer; + w->ctrl = s; + timer_init_ns(&w->base_timer.qtimer, QEMU_CLOCK_VIRTUAL, + npcm7xx_watchdog_timer_expired, w); + sysbus_init_irq(sbd, &w->irq); + memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s, TYPE_NPCM7XX_TIMER, 4 * KiB); sysbus_init_mmio(sbd, &s->iomem); + qdev_init_gpio_out_named(dev, &w->reset_signal, + NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1); } -static const VMStateDescription vmstate_npcm7xx_timer = { - .name = "npcm7xx-timer", +static const VMStateDescription vmstate_npcm7xx_base_timer = { + .name = "npcm7xx-base-timer", .version_id = 0, .minimum_version_id = 0, .fields = (VMStateField[]) { - VMSTATE_TIMER(qtimer, NPCM7xxTimer), - VMSTATE_INT64(expires_ns, NPCM7xxTimer), - VMSTATE_INT64(remaining_ns, NPCM7xxTimer), + VMSTATE_TIMER(qtimer, NPCM7xxBaseTimer), + VMSTATE_INT64(expires_ns, NPCM7xxBaseTimer), + VMSTATE_INT64(remaining_ns, NPCM7xxBaseTimer), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_timer = { + .name = "npcm7xx-timer", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_STRUCT(base_timer, NPCM7xxTimer, + 0, vmstate_npcm7xx_base_timer, + NPCM7xxBaseTimer), VMSTATE_UINT32(tcsr, NPCM7xxTimer), VMSTATE_UINT32(ticr, NPCM7xxTimer), VMSTATE_END_OF_LIST(), }, }; -static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { - .name = "npcm7xx-timer-ctrl", +static const VMStateDescription vmstate_npcm7xx_watchdog_timer = { + .name = "npcm7xx-watchdog-timer", .version_id = 0, .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_STRUCT(base_timer, NPCM7xxWatchdogTimer, + 0, vmstate_npcm7xx_base_timer, + NPCM7xxBaseTimer), + VMSTATE_UINT32(wtcr, NPCM7xxWatchdogTimer), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { + .name = "npcm7xx-timer-ctrl", + .version_id = 1, + .minimum_version_id = 1, .fields = (VMStateField[]) { VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState), - VMSTATE_UINT32(wtcr, NPCM7xxTimerCtrlState), VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState, NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer, NPCM7xxTimer), + VMSTATE_STRUCT(watchdog_timer, NPCM7xxTimerCtrlState, + 0, vmstate_npcm7xx_watchdog_timer, + NPCM7xxWatchdogTimer), VMSTATE_END_OF_LIST(), }, }; diff --git a/tests/qtest/npcm7xx_watchdog_timer-test.c b/tests/qtest/npcm7xx_watchdog_timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_watchdog_timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx Timer Watchdog Modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/timer.h" + +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" + +#define WTCR_OFFSET 0x1c +#define REF_HZ (25000000) + +/* WTCR bit fields */ +#define WTCLK(rv) ((rv) << 10) +#define WTE BIT(7) +#define WTIE BIT(6) +#define WTIS(rv) ((rv) << 4) +#define WTIF BIT(3) +#define WTRF BIT(2) +#define WTRE BIT(1) +#define WTR BIT(0) + +typedef struct Watchdog { + int irq; + uint64_t base_addr; +} Watchdog; + +static const Watchdog watchdog_list[] = { + { + .irq = 47, + .base_addr = 0xf0008000 + }, + { + .irq = 48, + .base_addr = 0xf0009000 + }, + { + .irq = 49, + .base_addr = 0xf000a000 + } +}; + +static int watchdog_index(const Watchdog *wd) +{ + ptrdiff_t diff = wd - watchdog_list; + + g_assert(diff >= 0 && diff < ARRAY_SIZE(watchdog_list)); + + return diff; +} + +static uint32_t watchdog_read_wtcr(QTestState *qts, const Watchdog *wd) +{ + return qtest_readl(qts, wd->base_addr + WTCR_OFFSET); +} + +static void watchdog_write_wtcr(QTestState *qts, const Watchdog *wd, + uint32_t value) +{ + qtest_writel(qts, wd->base_addr + WTCR_OFFSET, value); +} + +static uint32_t watchdog_prescaler(QTestState *qts, const Watchdog *wd) +{ + switch (extract32(watchdog_read_wtcr(qts, wd), 10, 2)) { + case 0: + return 1; + case 1: + return 256; + case 2: + return 2048; + case 3: + return 65536; + default: + g_assert_not_reached(); + } +} + +static QDict *get_watchdog_action(QTestState *qts) +{ + QDict *ev = qtest_qmp_eventwait_ref(qts, "WATCHDOG"); + QDict *data; + + data = qdict_get_qdict(ev, "data"); + qobject_ref(data); + qobject_unref(ev); + return data; +} + +#define RESET_CYCLES 1024 +static uint32_t watchdog_interrupt_cycles(QTestState *qts, const Watchdog *wd) +{ + uint32_t wtis = extract32(watchdog_read_wtcr(qts, wd), 4, 2); + return 1 << (14 + 2 * wtis); +} + +static int64_t watchdog_calculate_steps(uint32_t count, uint32_t prescale) +{ + return (NANOSECONDS_PER_SECOND / REF_HZ) * count * prescale; +} + +static int64_t watchdog_interrupt_steps(QTestState *qts, const Watchdog *wd) +{ + return watchdog_calculate_steps(watchdog_interrupt_cycles(qts, wd), + watchdog_prescaler(qts, wd)); +} + +/* Check wtcr can be reset to default value */ +static void test_init(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts = qtest_init("-machine quanta-gsj"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + watchdog_write_wtcr(qts, wd, WTCLK(1) | WTRF | WTIF | WTR); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(1)); + + qtest_quit(qts); +} + +/* Check a watchdog can generate interrupt and reset actions */ +static void test_reset_action(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts = qtest_init("-machine quanta-gsj"); + QDict *ad; + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + watchdog_write_wtcr(qts, wd, + WTCLK(0) | WTE | WTRF | WTRE | WTIF | WTIE | WTR); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTRE | WTIE); + + /* Check a watchdog can generate an interrupt */ + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTIF | WTIE | WTRE); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + /* Check a watchdog can generate a reset signal */ + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + ad = get_watchdog_action(qts); + /* The signal is a reset signal */ + g_assert_false(strcmp(qdict_get_str(ad, "action"), "reset")); + qobject_unref(ad); + qtest_qmp_eventwait(qts, "RESET"); + /* + * Make sure WTCR is reset to default except for WTRF bit which shouldn't + * be reset. + */ + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(1) | WTRF); + qtest_quit(qts); +} + +/* Check a watchdog works with all possible WTCLK prescalers and WTIS cycles */ +static void test_prescaler(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + + for (int wtclk = 0; wtclk < 4; ++wtclk) { + for (int wtis = 0; wtis < 4; ++wtis) { + QTestState *qts = qtest_init("-machine quanta-gsj"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, + WTCLK(wtclk) | WTE | WTIF | WTIS(wtis) | WTIE | WTR); + /* + * The interrupt doesn't fire until watchdog_interrupt_steps() + * cycles passed + */ + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd) - 1); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, 1); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + qtest_quit(qts); + } + } +} + +/* + * Check a watchdog doesn't fire if corresponding flags (WTIE and WTRE) are not + * set. + */ +static void test_enabling_flags(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts; + + /* Neither WTIE or WTRE is set, no interrupt or reset should happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTRF); + qtest_quit(qts); + + /* Only WTIE is set, interrupt is triggered but reset should not happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTIE | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_true(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTRF); + qtest_quit(qts); + + /* Only WTRE is set, interrupt is triggered but reset should not happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTRE | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_false(strcmp(qdict_get_str(get_watchdog_action(qts), "action"), + "reset")); + qtest_qmp_eventwait(qts, "RESET"); + qtest_quit(qts); + + /* + * The case when both flags are set is already tested in + * test_reset_action(). + */ +} + +/* Check a watchdog can pause and resume by setting WTE bits */ +static void test_pause(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts; + int64_t remaining_steps, steps; + + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTIE | WTRF | WTR); + remaining_steps = watchdog_interrupt_steps(qts, wd); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTE | WTIE); + + /* Run for half of the execution period. */ + steps = remaining_steps / 2; + remaining_steps -= steps; + qtest_clock_step(qts, steps); + + /* Pause the watchdog */ + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTIE); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTIE); + + /* Run for a long period of time, the watchdog shouldn't fire */ + qtest_clock_step(qts, steps << 4); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTIE); + g_assert_false(qtest_get_irq(qts, wd->irq)); + + /* Resume the watchdog */ + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIE); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTE | WTIE); + + /* Run for the reset of the execution period, the watchdog should fire */ + qtest_clock_step(qts, remaining_steps); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTIF | WTIE); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + qtest_quit(qts); +} + +static void watchdog_add_test(const char *name, const Watchdog* wd, + GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf( + "npcm7xx_watchdog_timer[%d]/%s", watchdog_index(wd), name); + qtest_add_data_func(full_name, wd, fn); +} +#define add_test(name, td) watchdog_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + for (int i = 0; i < ARRAY_SIZE(watchdog_list); ++i) { + const Watchdog *wd = &watchdog_list[i]; + + add_test(init, wd); + add_test(reset_action, wd); + add_test(prescaler, wd); + add_test(enabling_flags, wd); + add_test(pause, wd); + } + + return g_test_run(); +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* F: include/hw/*/npcm7xx* +F: tests/qtest/npcm7xx* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ (config_all_devices.has_key('CONFIG_ISA_TESTDEV') ? ['endianness-test'] : []) + \ ['prom-env-test', 'boot-serial-test'] -qtests_npcm7xx = ['npcm7xx_timer-test'] +qtests_npcm7xx = ['npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/misc/npcm7xx_rng.h | 34 ++++ hw/arm/npcm7xx.c | 7 +- hw/misc/npcm7xx_rng.c | 180 +++++++++++++++++++++ tests/qtest/npcm7xx_rng-test.c | 278 +++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + tests/qtest/meson.build | 5 +- 9 files changed, 510 insertions(+), 3 deletions(-) create mode 100644 include/hw/misc/npcm7xx_rng.h create mode 100644 hw/misc/npcm7xx_rng.c create mode 100644 tests/qtest/npcm7xx_rng-test.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * DDR4 memory controller (dummy interface indicating memory training is done) * OTP controllers (no protection features) * Flash Interface Unit (FIU; no protection features) + * Random Number Generator (RNG) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Peripheral SPI controller (PSPI) * Analog to Digital Converter (ADC) * SD/MMC host - * Random Number Generator (RNG) * PECI interface * Pulse Width Modulation (PWM) * Tachometer diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" +#include "hw/misc/npcm7xx_rng.h" #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState key_storage; NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; + NPCM7xxRNGState rng; NPCM7xxFIUState fiu[2]; } NPCM7xxState; diff --git a/include/hw/misc/npcm7xx_rng.h b/include/hw/misc/npcm7xx_rng.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/npcm7xx_rng.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx Random Number Generator. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM7XX_RNG_H +#define NPCM7XX_RNG_H + +#include "hw/sysbus.h" + +typedef struct NPCM7xxRNGState { + SysBusDevice parent; + + MemoryRegion iomem; + + uint8_t rngcs; + uint8_t rngd; + uint8_t rngmode; +} NPCM7xxRNGState; + +#define TYPE_NPCM7XX_RNG "npcm7xx-rng" +#define NPCM7XX_RNG(obj) OBJECT_CHECK(NPCM7xxRNGState, (obj), TYPE_NPCM7XX_RNG) + +#endif /* NPCM7XX_RNG_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_GCR_BA (0xf0800000) #define NPCM7XX_CLK_BA (0xf0801000) #define NPCM7XX_MC_BA (0xf0824000) +#define NPCM7XX_RNG_BA (0xf000b000) /* Internal AHB SRAM */ #define NPCM7XX_RAM3_BA (0xc0008000) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "otp2", &s->fuse_array, TYPE_NPCM7XX_FUSE_ARRAY); object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC); + object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG); for (i = 0; i < ARRAY_SIZE(s->tim); i++) { object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) serial_hd(i), DEVICE_LITTLE_ENDIAN); } + /* Random Number Generator. Cannot fail. */ + sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); create_unimplemented_device("npcm7xx.kcs", 0xf0007000, 4 * KiB); - create_unimplemented_device("npcm7xx.rng", 0xf000b000, 4 * KiB); create_unimplemented_device("npcm7xx.adc", 0xf000c000, 4 * KiB); create_unimplemented_device("npcm7xx.gfxi", 0xf000e000, 4 * KiB); create_unimplemented_device("npcm7xx.gpio[0]", 0xf0010000, 4 * KiB); diff --git a/hw/misc/npcm7xx_rng.c b/hw/misc/npcm7xx_rng.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/npcm7xx_rng.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx Random Number Generator. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/misc/npcm7xx_rng.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/guest-random.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +#define NPCM7XX_RNG_REGS_SIZE (4 * KiB) + +#define NPCM7XX_RNGCS (0x00) +#define NPCM7XX_RNGCS_CLKP(rv) extract32(rv, 2, 4) +#define NPCM7XX_RNGCS_DVALID BIT(1) +#define NPCM7XX_RNGCS_RNGE BIT(0) + +#define NPCM7XX_RNGD (0x04) +#define NPCM7XX_RNGMODE (0x08) +#define NPCM7XX_RNGMODE_NORMAL (0x02) + +static bool npcm7xx_rng_is_enabled(NPCM7xxRNGState *s) +{ + return (s->rngcs & NPCM7XX_RNGCS_RNGE) && + (s->rngmode == NPCM7XX_RNGMODE_NORMAL); +} + +static uint64_t npcm7xx_rng_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCM7xxRNGState *s = opaque; + uint64_t value = 0; + + switch (offset) { + case NPCM7XX_RNGCS: + /* + * If the RNG is enabled, but we don't have any valid random data, try + * obtaining some and update the DVALID bit accordingly. + */ + if (!npcm7xx_rng_is_enabled(s)) { + s->rngcs &= ~NPCM7XX_RNGCS_DVALID; + } else if (!(s->rngcs & NPCM7XX_RNGCS_DVALID)) { + uint8_t byte = 0; + + if (qemu_guest_getrandom(&byte, sizeof(byte), NULL) == 0) { + s->rngd = byte; + s->rngcs |= NPCM7XX_RNGCS_DVALID; + } + } + value = s->rngcs; + break; + case NPCM7XX_RNGD: + if (npcm7xx_rng_is_enabled(s) && s->rngcs & NPCM7XX_RNGCS_DVALID) { + s->rngcs &= ~NPCM7XX_RNGCS_DVALID; + value = s->rngd; + s->rngd = 0; + } + break; + case NPCM7XX_RNGMODE: + value = s->rngmode; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } + + trace_npcm7xx_rng_read(offset, value, size); + + return value; +} + +static void npcm7xx_rng_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + NPCM7xxRNGState *s = opaque; + + trace_npcm7xx_rng_write(offset, value, size); + + switch (offset) { + case NPCM7XX_RNGCS: + s->rngcs &= NPCM7XX_RNGCS_DVALID; + s->rngcs |= value & ~NPCM7XX_RNGCS_DVALID; + break; + case NPCM7XX_RNGD: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + case NPCM7XX_RNGMODE: + s->rngmode = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } +} + +static const MemoryRegionOps npcm7xx_rng_ops = { + .read = npcm7xx_rng_read, + .write = npcm7xx_rng_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void npcm7xx_rng_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxRNGState *s = NPCM7XX_RNG(obj); + + s->rngcs = 0; + s->rngd = 0; + s->rngmode = 0; +} + +static void npcm7xx_rng_init(Object *obj) +{ + NPCM7xxRNGState *s = NPCM7XX_RNG(obj); + + memory_region_init_io(&s->iomem, obj, &npcm7xx_rng_ops, s, "regs", + NPCM7XX_RNG_REGS_SIZE); + sysbus_init_mmio(&s->parent, &s->iomem); +} + +static const VMStateDescription vmstate_npcm7xx_rng = { + .name = "npcm7xx-rng", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(rngcs, NPCM7xxRNGState), + VMSTATE_UINT8(rngd, NPCM7xxRNGState), + VMSTATE_UINT8(rngmode, NPCM7xxRNGState), + VMSTATE_END_OF_LIST(), + }, +}; + +static void npcm7xx_rng_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx Random Number Generator"; + dc->vmsd = &vmstate_npcm7xx_rng; + rc->phases.enter = npcm7xx_rng_enter_reset; +} + +static const TypeInfo npcm7xx_rng_types[] = { + { + .name = TYPE_NPCM7XX_RNG, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxRNGState), + .class_init = npcm7xx_rng_class_init, + .instance_init = npcm7xx_rng_init, + }, +}; +DEFINE_TYPES(npcm7xx_rng_types); diff --git a/tests/qtest/npcm7xx_rng-test.c b/tests/qtest/npcm7xx_rng-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_rng-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Nuvoton NPCM7xx Random Number Generator + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include <math.h> + +#include "libqtest-single.h" +#include "qemu/bitops.h" + +#define RNG_BASE_ADDR 0xf000b000 + +/* Control and Status Register */ +#define RNGCS 0x00 +# define DVALID BIT(1) /* Data Valid */ +# define RNGE BIT(0) /* RNG Enable */ +/* Data Register */ +#define RNGD 0x04 +/* Mode Register */ +#define RNGMODE 0x08 +# define ROSEL_NORMAL (2) /* RNG only works in this mode */ + +/* Number of bits to collect for randomness tests. */ +#define TEST_INPUT_BITS (128) + +static void rng_writeb(unsigned int offset, uint8_t value) +{ + writeb(RNG_BASE_ADDR + offset, value); +} + +static uint8_t rng_readb(unsigned int offset) +{ + return readb(RNG_BASE_ADDR + offset); +} + +/* Disable RNG and set normal ring oscillator mode. */ +static void rng_reset(void) +{ + rng_writeb(RNGCS, 0); + rng_writeb(RNGMODE, ROSEL_NORMAL); +} + +/* Reset RNG and then enable it. */ +static void rng_reset_enable(void) +{ + rng_reset(); + rng_writeb(RNGCS, RNGE); +} + +/* Wait until Data Valid bit is set. */ +static bool rng_wait_ready(void) +{ + /* qemu_guest_getrandom may fail. Assume it won't fail 10 times in a row. */ + int retries = 10; + + while (retries-- > 0) { + if (rng_readb(RNGCS) & DVALID) { + return true; + } + } + + return false; +} + +/* + * Perform a frequency (monobit) test, as defined by NIST SP 800-22, on the + * sequence in buf and return the P-value. This represents the probability of a + * truly random sequence having the same proportion of zeros and ones as the + * sequence in buf. + * + * An RNG which always returns 0x00 or 0xff, or has some bits stuck at 0 or 1, + * will fail this test. However, an RNG which always returns 0x55, 0xf0 or some + * other value with an equal number of zeroes and ones will pass. + */ +static double calc_monobit_p(const uint8_t *buf, unsigned int len) +{ + unsigned int i; + double s_obs; + int sn = 0; + + for (i = 0; i < len; i++) { + /* + * Each 1 counts as 1, each 0 counts as -1. + * s = cp - (8 - cp) = 2 * cp - 8 + */ + sn += 2 * ctpop8(buf[i]) - 8; + } + + s_obs = abs(sn) / sqrt(len * BITS_PER_BYTE); + + return erfc(s_obs / sqrt(2)); +} + +/* + * Perform a runs test, as defined by NIST SP 800-22, and return the P-value. + * This represents the probability of a truly random sequence having the same + * number of runs (i.e. uninterrupted sequences of identical bits) as the + * sequence in buf. + */ +static double calc_runs_p(const unsigned long *buf, unsigned int nr_bits) +{ + unsigned int j; + unsigned int k; + int nr_ones = 0; + int vn_obs = 0; + double pi; + + g_assert(nr_bits % BITS_PER_LONG == 0); + + for (j = 0; j < nr_bits / BITS_PER_LONG; j++) { + nr_ones += __builtin_popcountl(buf[j]); + } + pi = (double)nr_ones / nr_bits; + + for (k = 0; k < nr_bits - 1; k++) { + vn_obs += !(test_bit(k, buf) ^ test_bit(k + 1, buf)); + } + vn_obs += 1; + + return erfc(fabs(vn_obs - 2 * nr_bits * pi * (1.0 - pi)) + / (2 * sqrt(2 * nr_bits) * pi * (1.0 - pi))); +} + +/* + * Verifies that DVALID is clear, and RNGD reads zero, when RNGE is cleared, + * and DVALID eventually becomes set when RNGE is set. + */ +static void test_enable_disable(void) +{ + /* Disable: DVALID should not be set, and RNGD should read zero */ + rng_reset(); + g_assert_cmphex(rng_readb(RNGCS), ==, 0); + g_assert_cmphex(rng_readb(RNGD), ==, 0); + + /* Enable: DVALID should be set, but we can't make assumptions about RNGD */ + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + g_assert_cmphex(rng_readb(RNGCS), ==, DVALID | RNGE); + + /* Disable: DVALID should not be set, and RNGD should read zero */ + rng_writeb(RNGCS, 0); + g_assert_cmphex(rng_readb(RNGCS), ==, 0); + g_assert_cmphex(rng_readb(RNGD), ==, 0); +} + +/* + * Verifies that the RNG only produces data when RNGMODE is set to 'normal' + * ring oscillator mode. + */ +static void test_rosel(void) +{ + rng_reset_enable(); + g_assert_true(rng_wait_ready()); + rng_writeb(RNGMODE, 0); + g_assert_false(rng_wait_ready()); + rng_writeb(RNGMODE, ROSEL_NORMAL); + g_assert_true(rng_wait_ready()); + rng_writeb(RNGMODE, 0); + g_assert_false(rng_wait_ready()); +} + +/* + * Verifies that a continuous sequence of bits collected after enabling the RNG + * satisfies a monobit test. + */ +static void test_continuous_monobit(void) +{ + uint8_t buf[TEST_INPUT_BITS / BITS_PER_BYTE]; + unsigned int i; + + rng_reset_enable(); + for (i = 0; i < sizeof(buf); i++) { + g_assert_true(rng_wait_ready()); + buf[i] = rng_readb(RNGD); + } + + g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); +} + +/* + * Verifies that a continuous sequence of bits collected after enabling the RNG + * satisfies a runs test. + */ +static void test_continuous_runs(void) +{ + union { + unsigned long l[TEST_INPUT_BITS / BITS_PER_LONG]; + uint8_t c[TEST_INPUT_BITS / BITS_PER_BYTE]; + } buf; + unsigned int i; + + rng_reset_enable(); + for (i = 0; i < sizeof(buf); i++) { + g_assert_true(rng_wait_ready()); + buf.c[i] = rng_readb(RNGD); + } + + g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); +} + +/* + * Verifies that the first data byte collected after enabling the RNG satisfies + * a monobit test. + */ +static void test_first_byte_monobit(void) +{ + /* Enable, collect one byte, disable. Repeat until we have 100 bits. */ + uint8_t buf[TEST_INPUT_BITS / BITS_PER_BYTE]; + unsigned int i; + + rng_reset(); + for (i = 0; i < sizeof(buf); i++) { + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + buf[i] = rng_readb(RNGD); + rng_writeb(RNGCS, 0); + } + + g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); +} + +/* + * Verifies that the first data byte collected after enabling the RNG satisfies + * a runs test. + */ +static void test_first_byte_runs(void) +{ + /* Enable, collect one byte, disable. Repeat until we have 100 bits. */ + union { + unsigned long l[TEST_INPUT_BITS / BITS_PER_LONG]; + uint8_t c[TEST_INPUT_BITS / BITS_PER_BYTE]; + } buf; + unsigned int i; + + rng_reset(); + for (i = 0; i < sizeof(buf); i++) { + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + buf.c[i] = rng_readb(RNGD); + rng_writeb(RNGCS, 0); + } + + g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("npcm7xx_rng/enable_disable", test_enable_disable); + qtest_add_func("npcm7xx_rng/rosel", test_rosel); + qtest_add_func("npcm7xx_rng/continuous/monobit", test_continuous_monobit); + qtest_add_func("npcm7xx_rng/continuous/runs", test_continuous_runs); + qtest_add_func("npcm7xx_rng/first_byte/monobit", test_first_byte_monobit); + qtest_add_func("npcm7xx_rng/first_byte/runs", test_first_byte_runs); + + qtest_start("-machine npcm750-evb"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c')) softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files( 'npcm7xx_clk.c', 'npcm7xx_gcr.c', + 'npcm7xx_rng.c', )) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files( 'omap_clk.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_clk_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " valu npcm7xx_gcr_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +# npcm7xx_rng.c +npcm7xx_rng_read(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" +npcm7xx_rng_write(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" + # stm32f4xx_syscfg.c stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d" stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d" diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ (config_all_devices.has_key('CONFIG_ISA_TESTDEV') ? ['endianness-test'] : []) + \ ['prom-env-test', 'boot-serial-test'] -qtests_npcm7xx = ['npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] +qtests_npcm7xx = \ + ['npcm7xx_rng-test', + 'npcm7xx_timer-test', + 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The NPCM730 and NPCM750 chips have a single USB host port shared between a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This adds support for both of them. Testing notes: * With -device usb-kbd, qemu will automatically insert a full-speed hub, and the keyboard becomes controlled by the OHCI controller. * With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly attached to the port without any hubs, and the device becomes controlled by the EHCI controller since it's high speed capable. * With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the keyboard is directly attached to the port, but it only advertises itself as full-speed capable, so it becomes controlled by the OHCI controller. In all cases, the keyboard device enumerates correctly. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- hw/usb/hcd-ehci.h | 1 + include/hw/arm/npcm7xx.h | 4 ++++ hw/arm/npcm7xx.c | 27 +++++++++++++++++++++++++-- hw/usb/hcd-ehci-sysbus.c | 19 +++++++++++++++++++ 5 files changed, 50 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * OTP controllers (no protection features) * Flash Interface Unit (FIU; no protection features) * Random Number Generator (RNG) + * USB host (USBH) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * eSPI slave interface * Ethernet controllers (GMAC and EMC) - * USB host (USBH) * USB device (USBD) * SMBus controller (SMBF) * Peripheral SPI controller (PSPI) diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.h +++ b/hw/usb/hcd-ehci.h @@ -XXX,XX +XXX,XX @@ struct EHCIPCIState { #define TYPE_PLATFORM_EHCI "platform-ehci-usb" #define TYPE_EXYNOS4210_EHCI "exynos4210-ehci-usb" #define TYPE_AW_H3_EHCI "aw-h3-ehci-usb" +#define TYPE_NPCM7XX_EHCI "npcm7xx-ehci-usb" #define TYPE_TEGRA2_EHCI "tegra2-ehci-usb" #define TYPE_PPC4xx_EHCI "ppc4xx-ehci-usb" #define TYPE_FUSBH200_EHCI "fusbh200-ehci-usb" diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/usb/hcd-ehci.h" +#include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" #define NPCM7XX_MAX_NUM_CPUS (2) @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; NPCM7xxRNGState rng; + EHCISysBusState ehci; + OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; } NPCM7xxState; diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_MC_BA (0xf0824000) #define NPCM7XX_RNG_BA (0xf000b000) +/* USB Host modules */ +#define NPCM7XX_EHCI_BA (0xf0806000) +#define NPCM7XX_OHCI_BA (0xf0807000) + /* Internal AHB SRAM */ #define NPCM7XX_RAM3_BA (0xc0008000) #define NPCM7XX_RAM3_SZ (4 * KiB) @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG0_IRQ = 47, /* Timer Module 0 Watchdog */ NPCM7XX_WDG1_IRQ, /* Timer Module 1 Watchdog */ NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ + NPCM7XX_EHCI_IRQ = 61, + NPCM7XX_OHCI_IRQ = 62, }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); } + object_initialize_child(obj, "ehci", &s->ehci, TYPE_NPCM7XX_EHCI); + object_initialize_child(obj, "ohci", &s->ohci, TYPE_SYSBUS_OHCI); + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_fiu) != ARRAY_SIZE(s->fiu)); for (i = 0; i < ARRAY_SIZE(s->fiu); i++) { object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i], @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* USB Host */ + object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true, + &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->ehci), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci), 0, NPCM7XX_EHCI_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci), 0, + npcm7xx_irq(s, NPCM7XX_EHCI_IRQ)); + + object_property_set_str(OBJECT(&s->ohci), "masterbus", "usb-bus.0", + &error_abort); + object_property_set_uint(OBJECT(&s->ohci), "num-ports", 1, &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->ohci), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ohci), 0, NPCM7XX_OHCI_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci), 0, + npcm7xx_irq(s, NPCM7XX_OHCI_IRQ)); + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); create_unimplemented_device("npcm7xx.gmac2", 0xf0804000, 8 * KiB); - create_unimplemented_device("npcm7xx.ehci", 0xf0806000, 4 * KiB); - create_unimplemented_device("npcm7xx.ohci", 0xf0807000, 4 * KiB); create_unimplemented_device("npcm7xx.vcd", 0xf0810000, 64 * KiB); create_unimplemented_device("npcm7xx.ece", 0xf0820000, 8 * KiB); create_unimplemented_device("npcm7xx.vdma", 0xf0822000, 8 * KiB); diff --git a/hw/usb/hcd-ehci-sysbus.c b/hw/usb/hcd-ehci-sysbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci-sysbus.c +++ b/hw/usb/hcd-ehci-sysbus.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ehci_aw_h3_type_info = { .class_init = ehci_aw_h3_class_init, }; +static void ehci_npcm7xx_class_init(ObjectClass *oc, void *data) +{ + SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); + DeviceClass *dc = DEVICE_CLASS(oc); + + sec->capsbase = 0x0; + sec->opregbase = 0x10; + sec->portscbase = 0x44; + sec->portnr = 1; + set_bit(DEVICE_CATEGORY_USB, dc->categories); +} + +static const TypeInfo ehci_npcm7xx_type_info = { + .name = TYPE_NPCM7XX_EHCI, + .parent = TYPE_SYS_BUS_EHCI, + .class_init = ehci_npcm7xx_class_init, +}; + static void ehci_tegra2_class_init(ObjectClass *oc, void *data) { SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void ehci_sysbus_register_types(void) type_register_static(&ehci_platform_type_info); type_register_static(&ehci_exynos4210_type_info); type_register_static(&ehci_aw_h3_type_info); + type_register_static(&ehci_npcm7xx_type_info); type_register_static(&ehci_tegra2_type_info); type_register_static(&ehci_ppc4xx_type_info); type_register_static(&ehci_fusbh200_type_info); -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/gpio/npcm7xx_gpio.h | 55 +++++ hw/arm/npcm7xx.c | 80 ++++++ hw/gpio/npcm7xx_gpio.c | 424 ++++++++++++++++++++++++++++++++ tests/qtest/npcm7xx_gpio-test.c | 385 +++++++++++++++++++++++++++++ hw/gpio/meson.build | 1 + hw/gpio/trace-events | 7 + tests/qtest/meson.build | 3 +- 9 files changed, 957 insertions(+), 2 deletions(-) create mode 100644 include/hw/gpio/npcm7xx_gpio.h create mode 100644 hw/gpio/npcm7xx_gpio.c create mode 100644 tests/qtest/npcm7xx_gpio-test.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Flash Interface Unit (FIU; no protection features) * Random Number Generator (RNG) * USB host (USBH) + * GPIO controller Missing devices --------------- - * GPIO controller * LPC/eSPI host-to-BMC interface, including * Keyboard and mouse controller interface (KBCI) diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/cpu/a9mpcore.h" +#include "hw/gpio/npcm7xx_gpio.h" #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; NPCM7xxRNGState rng; + NPCM7xxGPIOState gpio[8]; EHCISysBusState ehci; OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; diff --git a/include/hw/gpio/npcm7xx_gpio.h b/include/hw/gpio/npcm7xx_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/npcm7xx_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx General Purpose Input / Output (GPIO) + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef NPCM7XX_GPIO_H +#define NPCM7XX_GPIO_H + +#include "exec/memory.h" +#include "hw/sysbus.h" + +/* Number of pins managed by each controller. */ +#define NPCM7XX_GPIO_NR_PINS (32) + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM7XX_GPIO_NR_REGS (0x80 / sizeof(uint32_t)) + +typedef struct NPCM7xxGPIOState { + SysBusDevice parent; + + /* Properties to be defined by the SoC */ + uint32_t reset_pu; + uint32_t reset_pd; + uint32_t reset_osrc; + uint32_t reset_odsc; + + MemoryRegion mmio; + + qemu_irq irq; + qemu_irq output[NPCM7XX_GPIO_NR_PINS]; + + uint32_t pin_level; + uint32_t ext_level; + uint32_t ext_driven; + + uint32_t regs[NPCM7XX_GPIO_NR_REGS]; +} NPCM7xxGPIOState; + +#define TYPE_NPCM7XX_GPIO "npcm7xx-gpio" +#define NPCM7XX_GPIO(obj) \ + OBJECT_CHECK(NPCM7xxGPIOState, (obj), TYPE_NPCM7XX_GPIO) + +#endif /* NPCM7XX_GPIO_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ NPCM7XX_EHCI_IRQ = 61, NPCM7XX_OHCI_IRQ = 62, + NPCM7XX_GPIO0_IRQ = 116, + NPCM7XX_GPIO1_IRQ, + NPCM7XX_GPIO2_IRQ, + NPCM7XX_GPIO3_IRQ, + NPCM7XX_GPIO4_IRQ, + NPCM7XX_GPIO5_IRQ, + NPCM7XX_GPIO6_IRQ, + NPCM7XX_GPIO7_IRQ, }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_fiu3_flash_addr[] = { 0xb8000000, /* CS3 */ }; +static const struct { + hwaddr regs_addr; + uint32_t unconnected_pins; + uint32_t reset_pu; + uint32_t reset_pd; + uint32_t reset_osrc; + uint32_t reset_odsc; +} npcm7xx_gpio[] = { + { + .regs_addr = 0xf0010000, + .reset_pu = 0xff03ffff, + .reset_pd = 0x00fc0000, + }, { + .regs_addr = 0xf0011000, + .unconnected_pins = 0x0000001e, + .reset_pu = 0xfefffe07, + .reset_pd = 0x010001e0, + }, { + .regs_addr = 0xf0012000, + .reset_pu = 0x780fffff, + .reset_pd = 0x07f00000, + .reset_odsc = 0x00700000, + }, { + .regs_addr = 0xf0013000, + .reset_pu = 0x00fc0000, + .reset_pd = 0xff000000, + }, { + .regs_addr = 0xf0014000, + .reset_pu = 0xffffffff, + }, { + .regs_addr = 0xf0015000, + .reset_pu = 0xbf83f801, + .reset_pd = 0x007c0000, + .reset_osrc = 0x000000f1, + .reset_odsc = 0x3f9f80f1, + }, { + .regs_addr = 0xf0016000, + .reset_pu = 0xfc00f801, + .reset_pd = 0x000007fe, + .reset_odsc = 0x00000800, + }, { + .regs_addr = 0xf0017000, + .unconnected_pins = 0xffffff00, + .reset_pu = 0x0000007f, + .reset_osrc = 0x0000007f, + .reset_odsc = 0x0000007f, + }, +}; + static const struct { const char *name; hwaddr regs_addr; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); } + for (i = 0; i < ARRAY_SIZE(s->gpio); i++) { + object_initialize_child(obj, "gpio[*]", &s->gpio[i], TYPE_NPCM7XX_GPIO); + } + object_initialize_child(obj, "ehci", &s->ehci, TYPE_NPCM7XX_EHCI); object_initialize_child(obj, "ohci", &s->ohci, TYPE_SYSBUS_OHCI); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* GPIO modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_gpio) != ARRAY_SIZE(s->gpio)); + for (i = 0; i < ARRAY_SIZE(s->gpio); i++) { + Object *obj = OBJECT(&s->gpio[i]); + + object_property_set_uint(obj, "reset-pullup", + npcm7xx_gpio[i].reset_pu, &error_abort); + object_property_set_uint(obj, "reset-pulldown", + npcm7xx_gpio[i].reset_pd, &error_abort); + object_property_set_uint(obj, "reset-osrc", + npcm7xx_gpio[i].reset_osrc, &error_abort); + object_property_set_uint(obj, "reset-odsc", + npcm7xx_gpio[i].reset_odsc, &error_abort); + sysbus_realize(SYS_BUS_DEVICE(obj), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(obj), 0, npcm7xx_gpio[i].regs_addr); + sysbus_connect_irq(SYS_BUS_DEVICE(obj), 0, + npcm7xx_irq(s, NPCM7XX_GPIO0_IRQ + i)); + } + /* USB Host */ object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true, &error_abort); diff --git a/hw/gpio/npcm7xx_gpio.c b/hw/gpio/npcm7xx_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/npcm7xx_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx General Purpose Input / Output (GPIO) + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/gpio/npcm7xx_gpio.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "trace.h" + +/* 32-bit register indices. */ +enum NPCM7xxGPIORegister { + NPCM7XX_GPIO_TLOCK1, + NPCM7XX_GPIO_DIN, + NPCM7XX_GPIO_POL, + NPCM7XX_GPIO_DOUT, + NPCM7XX_GPIO_OE, + NPCM7XX_GPIO_OTYP, + NPCM7XX_GPIO_MP, + NPCM7XX_GPIO_PU, + NPCM7XX_GPIO_PD, + NPCM7XX_GPIO_DBNC, + NPCM7XX_GPIO_EVTYP, + NPCM7XX_GPIO_EVBE, + NPCM7XX_GPIO_OBL0, + NPCM7XX_GPIO_OBL1, + NPCM7XX_GPIO_OBL2, + NPCM7XX_GPIO_OBL3, + NPCM7XX_GPIO_EVEN, + NPCM7XX_GPIO_EVENS, + NPCM7XX_GPIO_EVENC, + NPCM7XX_GPIO_EVST, + NPCM7XX_GPIO_SPLCK, + NPCM7XX_GPIO_MPLCK, + NPCM7XX_GPIO_IEM, + NPCM7XX_GPIO_OSRC, + NPCM7XX_GPIO_ODSC, + NPCM7XX_GPIO_DOS = 0x68 / sizeof(uint32_t), + NPCM7XX_GPIO_DOC, + NPCM7XX_GPIO_OES, + NPCM7XX_GPIO_OEC, + NPCM7XX_GPIO_TLOCK2 = 0x7c / sizeof(uint32_t), + NPCM7XX_GPIO_REGS_END, +}; + +#define NPCM7XX_GPIO_REGS_SIZE (4 * KiB) + +#define NPCM7XX_GPIO_LOCK_MAGIC1 (0xc0defa73) +#define NPCM7XX_GPIO_LOCK_MAGIC2 (0xc0de1248) + +static void npcm7xx_gpio_update_events(NPCM7xxGPIOState *s, uint32_t din_diff) +{ + uint32_t din_new = s->regs[NPCM7XX_GPIO_DIN]; + + /* Trigger on high level */ + s->regs[NPCM7XX_GPIO_EVST] |= din_new & ~s->regs[NPCM7XX_GPIO_EVTYP]; + /* Trigger on both edges */ + s->regs[NPCM7XX_GPIO_EVST] |= (din_diff & s->regs[NPCM7XX_GPIO_EVTYP] + & s->regs[NPCM7XX_GPIO_EVBE]); + /* Trigger on rising edge */ + s->regs[NPCM7XX_GPIO_EVST] |= (din_diff & din_new + & s->regs[NPCM7XX_GPIO_EVTYP]); + + trace_npcm7xx_gpio_update_events(DEVICE(s)->canonical_path, + s->regs[NPCM7XX_GPIO_EVST], + s->regs[NPCM7XX_GPIO_EVEN]); + qemu_set_irq(s->irq, !!(s->regs[NPCM7XX_GPIO_EVST] + & s->regs[NPCM7XX_GPIO_EVEN])); +} + +static void npcm7xx_gpio_update_pins(NPCM7xxGPIOState *s, uint32_t diff) +{ + uint32_t drive_en; + uint32_t drive_lvl; + uint32_t not_driven; + uint32_t undefined; + uint32_t pin_diff; + uint32_t din_old; + + /* Calculate level of each pin driven by GPIO controller. */ + drive_lvl = s->regs[NPCM7XX_GPIO_DOUT] ^ s->regs[NPCM7XX_GPIO_POL]; + /* If OTYP=1, only drive low (open drain) */ + drive_en = s->regs[NPCM7XX_GPIO_OE] & ~(s->regs[NPCM7XX_GPIO_OTYP] + & drive_lvl); + /* + * If a pin is driven to opposite levels by the GPIO controller and the + * external driver, the result is undefined. + */ + undefined = drive_en & s->ext_driven & (drive_lvl ^ s->ext_level); + if (undefined) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: pins have multiple drivers: 0x%" PRIx32 "\n", + DEVICE(s)->canonical_path, undefined); + } + + not_driven = ~(drive_en | s->ext_driven); + pin_diff = s->pin_level; + + /* Set pins to externally driven level. */ + s->pin_level = s->ext_level & s->ext_driven; + /* Set internally driven pins, ignoring any conflicts. */ + s->pin_level |= drive_lvl & drive_en; + /* Pull up undriven pins with internal pull-up enabled. */ + s->pin_level |= not_driven & s->regs[NPCM7XX_GPIO_PU]; + /* Pins not driven, pulled up or pulled down are undefined */ + undefined |= not_driven & ~(s->regs[NPCM7XX_GPIO_PU] + | s->regs[NPCM7XX_GPIO_PD]); + + /* If any pins changed state, update the outgoing GPIOs. */ + pin_diff ^= s->pin_level; + pin_diff |= undefined & diff; + if (pin_diff) { + int i; + + for (i = 0; i < NPCM7XX_GPIO_NR_PINS; i++) { + uint32_t mask = BIT(i); + if (pin_diff & mask) { + int level = (undefined & mask) ? -1 : !!(s->pin_level & mask); + trace_npcm7xx_gpio_set_output(DEVICE(s)->canonical_path, + i, level); + qemu_set_irq(s->output[i], level); + } + } + } + + /* Calculate new value of DIN after masking and polarity setting. */ + din_old = s->regs[NPCM7XX_GPIO_DIN]; + s->regs[NPCM7XX_GPIO_DIN] = ((s->pin_level & s->regs[NPCM7XX_GPIO_IEM]) + ^ s->regs[NPCM7XX_GPIO_POL]); + + /* See if any new events triggered because of all this. */ + npcm7xx_gpio_update_events(s, din_old ^ s->regs[NPCM7XX_GPIO_DIN]); +} + +static bool npcm7xx_gpio_is_locked(NPCM7xxGPIOState *s) +{ + return s->regs[NPCM7XX_GPIO_TLOCK1] == 1; +} + +static uint64_t npcm7xx_gpio_regs_read(void *opaque, hwaddr addr, + unsigned int size) +{ + hwaddr reg = addr / sizeof(uint32_t); + NPCM7xxGPIOState *s = opaque; + uint64_t value = 0; + + switch (reg) { + case NPCM7XX_GPIO_TLOCK1 ... NPCM7XX_GPIO_EVEN: + case NPCM7XX_GPIO_EVST ... NPCM7XX_GPIO_ODSC: + value = s->regs[reg]; + break; + + case NPCM7XX_GPIO_EVENS ... NPCM7XX_GPIO_EVENC: + case NPCM7XX_GPIO_DOS ... NPCM7XX_GPIO_TLOCK2: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from write-only register 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } + + trace_npcm7xx_gpio_read(DEVICE(s)->canonical_path, addr, value); + + return value; +} + +static void npcm7xx_gpio_regs_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + hwaddr reg = addr / sizeof(uint32_t); + NPCM7xxGPIOState *s = opaque; + uint32_t value = v; + uint32_t diff; + + trace_npcm7xx_gpio_write(DEVICE(s)->canonical_path, addr, v); + + if (npcm7xx_gpio_is_locked(s)) { + switch (reg) { + case NPCM7XX_GPIO_TLOCK1: + if (s->regs[NPCM7XX_GPIO_TLOCK2] == NPCM7XX_GPIO_LOCK_MAGIC2 && + value == NPCM7XX_GPIO_LOCK_MAGIC1) { + s->regs[NPCM7XX_GPIO_TLOCK1] = 0; + s->regs[NPCM7XX_GPIO_TLOCK2] = 0; + } + break; + + case NPCM7XX_GPIO_TLOCK2: + s->regs[reg] = value; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to locked register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } + + return; + } + + diff = s->regs[reg] ^ value; + + switch (reg) { + case NPCM7XX_GPIO_TLOCK1: + case NPCM7XX_GPIO_TLOCK2: + s->regs[NPCM7XX_GPIO_TLOCK1] = 1; + s->regs[NPCM7XX_GPIO_TLOCK2] = 0; + break; + + case NPCM7XX_GPIO_DIN: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + + case NPCM7XX_GPIO_POL: + case NPCM7XX_GPIO_DOUT: + case NPCM7XX_GPIO_OE: + case NPCM7XX_GPIO_OTYP: + case NPCM7XX_GPIO_PU: + case NPCM7XX_GPIO_PD: + case NPCM7XX_GPIO_IEM: + s->regs[reg] = value; + npcm7xx_gpio_update_pins(s, diff); + break; + + case NPCM7XX_GPIO_DOS: + s->regs[NPCM7XX_GPIO_DOUT] |= value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_DOC: + s->regs[NPCM7XX_GPIO_DOUT] &= ~value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_OES: + s->regs[NPCM7XX_GPIO_OE] |= value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_OEC: + s->regs[NPCM7XX_GPIO_OE] &= ~value; + npcm7xx_gpio_update_pins(s, value); + break; + + case NPCM7XX_GPIO_EVTYP: + case NPCM7XX_GPIO_EVBE: + case NPCM7XX_GPIO_EVEN: + s->regs[reg] = value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_EVENS: + s->regs[NPCM7XX_GPIO_EVEN] |= value; + npcm7xx_gpio_update_events(s, 0); + break; + case NPCM7XX_GPIO_EVENC: + s->regs[NPCM7XX_GPIO_EVEN] &= ~value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_EVST: + s->regs[reg] &= ~value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_MP: + case NPCM7XX_GPIO_DBNC: + case NPCM7XX_GPIO_OSRC: + case NPCM7XX_GPIO_ODSC: + /* Nothing to do; just store the value. */ + s->regs[reg] = value; + break; + + case NPCM7XX_GPIO_OBL0: + case NPCM7XX_GPIO_OBL1: + case NPCM7XX_GPIO_OBL2: + case NPCM7XX_GPIO_OBL3: + s->regs[reg] = value; + qemu_log_mask(LOG_UNIMP, "%s: Blinking is not implemented\n", + __func__); + break; + + case NPCM7XX_GPIO_SPLCK: + case NPCM7XX_GPIO_MPLCK: + qemu_log_mask(LOG_UNIMP, "%s: Per-pin lock is not implemented\n", + __func__); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } +} + +static const MemoryRegionOps npcm7xx_gpio_regs_ops = { + .read = npcm7xx_gpio_regs_read, + .write = npcm7xx_gpio_regs_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void npcm7xx_gpio_set_input(void *opaque, int line, int level) +{ + NPCM7xxGPIOState *s = opaque; + + trace_npcm7xx_gpio_set_input(DEVICE(s)->canonical_path, line, level); + + g_assert(line >= 0 && line < NPCM7XX_GPIO_NR_PINS); + + s->ext_driven = deposit32(s->ext_driven, line, 1, level >= 0); + s->ext_level = deposit32(s->ext_level, line, 1, level > 0); + + npcm7xx_gpio_update_pins(s, BIT(line)); +} + +static void npcm7xx_gpio_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + + memset(s->regs, 0, sizeof(s->regs)); + + s->regs[NPCM7XX_GPIO_PU] = s->reset_pu; + s->regs[NPCM7XX_GPIO_PD] = s->reset_pd; + s->regs[NPCM7XX_GPIO_OSRC] = s->reset_osrc; + s->regs[NPCM7XX_GPIO_ODSC] = s->reset_odsc; +} + +static void npcm7xx_gpio_hold_reset(Object *obj) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + + npcm7xx_gpio_update_pins(s, -1); +} + +static void npcm7xx_gpio_init(Object *obj) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + DeviceState *dev = DEVICE(obj); + + memory_region_init_io(&s->mmio, obj, &npcm7xx_gpio_regs_ops, s, + "regs", NPCM7XX_GPIO_REGS_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + qdev_init_gpio_in(dev, npcm7xx_gpio_set_input, NPCM7XX_GPIO_NR_PINS); + qdev_init_gpio_out(dev, s->output, NPCM7XX_GPIO_NR_PINS); +} + +static const VMStateDescription vmstate_npcm7xx_gpio = { + .name = "npcm7xx-gpio", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT32(pin_level, NPCM7xxGPIOState), + VMSTATE_UINT32(ext_level, NPCM7xxGPIOState), + VMSTATE_UINT32(ext_driven, NPCM7xxGPIOState), + VMSTATE_UINT32_ARRAY(regs, NPCM7xxGPIOState, NPCM7XX_GPIO_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + +static Property npcm7xx_gpio_properties[] = { + /* Bit n set => pin n has pullup enabled by default. */ + DEFINE_PROP_UINT32("reset-pullup", NPCM7xxGPIOState, reset_pu, 0), + /* Bit n set => pin n has pulldown enabled by default. */ + DEFINE_PROP_UINT32("reset-pulldown", NPCM7xxGPIOState, reset_pd, 0), + /* Bit n set => pin n has high slew rate by default. */ + DEFINE_PROP_UINT32("reset-osrc", NPCM7xxGPIOState, reset_osrc, 0), + /* Bit n set => pin n has high drive strength by default. */ + DEFINE_PROP_UINT32("reset-odsc", NPCM7xxGPIOState, reset_odsc, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void npcm7xx_gpio_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *reset = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + QEMU_BUILD_BUG_ON(NPCM7XX_GPIO_REGS_END > NPCM7XX_GPIO_NR_REGS); + + dc->desc = "NPCM7xx GPIO Controller"; + dc->vmsd = &vmstate_npcm7xx_gpio; + reset->phases.enter = npcm7xx_gpio_enter_reset; + reset->phases.hold = npcm7xx_gpio_hold_reset; + device_class_set_props(dc, npcm7xx_gpio_properties); +} + +static const TypeInfo npcm7xx_gpio_types[] = { + { + .name = TYPE_NPCM7XX_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxGPIOState), + .class_init = npcm7xx_gpio_class_init, + .instance_init = npcm7xx_gpio_init, + }, +}; +DEFINE_TYPES(npcm7xx_gpio_types); diff --git a/tests/qtest/npcm7xx_gpio-test.c b/tests/qtest/npcm7xx_gpio-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_gpio-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Nuvoton NPCM7xx GPIO modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +#define NR_GPIO_DEVICES (8) +#define GPIO(x) (0xf0010000 + (x) * 0x1000) +#define GPIO_IRQ(x) (116 + (x)) + +/* GPIO registers */ +#define GP_N_TLOCK1 0x00 +#define GP_N_DIN 0x04 /* Data IN */ +#define GP_N_POL 0x08 /* Polarity */ +#define GP_N_DOUT 0x0c /* Data OUT */ +#define GP_N_OE 0x10 /* Output Enable */ +#define GP_N_OTYP 0x14 +#define GP_N_MP 0x18 +#define GP_N_PU 0x1c /* Pull-up */ +#define GP_N_PD 0x20 /* Pull-down */ +#define GP_N_DBNC 0x24 /* Debounce */ +#define GP_N_EVTYP 0x28 /* Event Type */ +#define GP_N_EVBE 0x2c /* Event Both Edge */ +#define GP_N_OBL0 0x30 +#define GP_N_OBL1 0x34 +#define GP_N_OBL2 0x38 +#define GP_N_OBL3 0x3c +#define GP_N_EVEN 0x40 /* Event Enable */ +#define GP_N_EVENS 0x44 /* Event Set (enable) */ +#define GP_N_EVENC 0x48 /* Event Clear (disable) */ +#define GP_N_EVST 0x4c /* Event Status */ +#define GP_N_SPLCK 0x50 +#define GP_N_MPLCK 0x54 +#define GP_N_IEM 0x58 /* Input Enable */ +#define GP_N_OSRC 0x5c +#define GP_N_ODSC 0x60 +#define GP_N_DOS 0x68 /* Data OUT Set */ +#define GP_N_DOC 0x6c /* Data OUT Clear */ +#define GP_N_OES 0x70 /* Output Enable Set */ +#define GP_N_OEC 0x74 /* Output Enable Clear */ +#define GP_N_TLOCK2 0x7c + +static void gpio_unlock(int n) +{ + if (readl(GPIO(n) + GP_N_TLOCK1) != 0) { + writel(GPIO(n) + GP_N_TLOCK2, 0xc0de1248); + writel(GPIO(n) + GP_N_TLOCK1, 0xc0defa73); + } +} + +/* Restore the GPIO controller to a sensible default state. */ +static void gpio_reset(int n) +{ + gpio_unlock(0); + + writel(GPIO(n) + GP_N_EVEN, 0x00000000); + writel(GPIO(n) + GP_N_EVST, 0xffffffff); + writel(GPIO(n) + GP_N_POL, 0x00000000); + writel(GPIO(n) + GP_N_DOUT, 0x00000000); + writel(GPIO(n) + GP_N_OE, 0x00000000); + writel(GPIO(n) + GP_N_OTYP, 0x00000000); + writel(GPIO(n) + GP_N_PU, 0xffffffff); + writel(GPIO(n) + GP_N_PD, 0x00000000); + writel(GPIO(n) + GP_N_IEM, 0xffffffff); +} + +static void test_dout_to_din(void) +{ + gpio_reset(0); + + /* When output is enabled, DOUT should be reflected on DIN. */ + writel(GPIO(0) + GP_N_OE, 0xffffffff); + /* PU and PD shouldn't have any impact on DIN. */ + writel(GPIO(0) + GP_N_PU, 0xffff0000); + writel(GPIO(0) + GP_N_PD, 0x0000ffff); + writel(GPIO(0) + GP_N_DOUT, 0x12345678); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x12345678); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x12345678); +} + +static void test_pullup_pulldown(void) +{ + gpio_reset(0); + + /* + * When output is disabled, and PD is the inverse of PU, PU should be + * reflected on DIN. If PD is not the inverse of PU, the state of DIN is + * undefined, so we don't test that. + */ + writel(GPIO(0) + GP_N_OE, 0x00000000); + /* DOUT shouldn't have any impact on DIN. */ + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_PU, 0x23456789); + writel(GPIO(0) + GP_N_PD, ~0x23456789U); + g_assert_cmphex(readl(GPIO(0) + GP_N_PU), ==, 0x23456789); + g_assert_cmphex(readl(GPIO(0) + GP_N_PD), ==, ~0x23456789U); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x23456789); +} + +static void test_output_enable(void) +{ + gpio_reset(0); + + /* + * With all pins weakly pulled down, and DOUT all-ones, OE should be + * reflected on DIN. + */ + writel(GPIO(0) + GP_N_DOUT, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0x00000000); + writel(GPIO(0) + GP_N_PD, 0xffffffff); + writel(GPIO(0) + GP_N_OE, 0x3456789a); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x3456789a); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x3456789a); + + writel(GPIO(0) + GP_N_OEC, 0x00030002); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x34547898); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x34547898); + + writel(GPIO(0) + GP_N_OES, 0x0000f001); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x3454f899); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x3454f899); +} + +static void test_open_drain(void) +{ + gpio_reset(0); + + /* + * Upper half of DOUT drives a 1 only if the corresponding bit in OTYP is + * not set. If OTYP is set, DIN is determined by PU/PD. Lower half of + * DOUT always drives a 0 regardless of OTYP; PU/PD have no effect. When + * OE is 0, output is determined by PU/PD; OTYP has no effect. + */ + writel(GPIO(0) + GP_N_OTYP, 0x456789ab); + writel(GPIO(0) + GP_N_OE, 0xf0f0f0f0); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_PU, 0xff00ff00); + writel(GPIO(0) + GP_N_PD, 0x00ff00ff); + g_assert_cmphex(readl(GPIO(0) + GP_N_OTYP), ==, 0x456789ab); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff900f00); +} + +static void test_polarity(void) +{ + gpio_reset(0); + + /* + * In push-pull mode, DIN should reflect DOUT because the signal is + * inverted in both directions. + */ + writel(GPIO(0) + GP_N_OTYP, 0x00000000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0x56789abc); + writel(GPIO(0) + GP_N_POL, 0x6789abcd); + g_assert_cmphex(readl(GPIO(0) + GP_N_POL), ==, 0x6789abcd); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x56789abc); + + /* + * When turning off the drivers, DIN should reflect the inverse of the + * pulled-up lines. + */ + writel(GPIO(0) + GP_N_OE, 0x00000000); + writel(GPIO(0) + GP_N_POL, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0x789abcde); + writel(GPIO(0) + GP_N_PD, ~0x789abcdeU); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, ~0x789abcdeU); + + /* + * In open-drain mode, DOUT=1 will appear to drive the pin high (since DIN + * is inverted), while DOUT=0 will leave the pin floating. + */ + writel(GPIO(0) + GP_N_OTYP, 0xffffffff); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0xffff0000); + writel(GPIO(0) + GP_N_PD, 0x0000ffff); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff00ffff); +} + +static void test_input_mask(void) +{ + gpio_reset(0); + + /* IEM=0 forces the input to zero before polarity inversion. */ + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + writel(GPIO(0) + GP_N_POL, 0xffff0000); + writel(GPIO(0) + GP_N_IEM, 0x87654321); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff9a4300); +} + +static void test_temp_lock(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + + /* Make sure we're unlocked initially. */ + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + /* Writing any value to TLOCK1 will lock. */ + writel(GPIO(0) + GP_N_TLOCK1, 0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 1); + writel(GPIO(0) + GP_N_DOUT, 0xa9876543); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x98765432); + /* Now, try to unlock. */ + gpio_unlock(0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + writel(GPIO(0) + GP_N_DOUT, 0xa9876543); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0xa9876543); + + /* Try it again, but write TLOCK2 to lock. */ + writel(GPIO(0) + GP_N_TLOCK2, 0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 1); + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0xa9876543); + /* Now, try to unlock. */ + gpio_unlock(0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x98765432); +} + +static void test_events_level(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0x00000000); + writel(GPIO(0) + GP_N_DOUT, 0xba987654); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba987654); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0x00000000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba987654); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x00007654); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba980000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0xba980000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_events_rising_edge(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0xffffffff); + writel(GPIO(0) + GP_N_EVBE, 0x00000000); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x0000ff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0x00ff0000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ffff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x0000f000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ff0f00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x00ff0f00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_events_both_edges(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0xffffffff); + writel(GPIO(0) + GP_N_EVBE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ffff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xef00ff08); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x10ffff08); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x0000f000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x10ff0f08); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x10ff0f08); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_gpion_irq(gconstpointer test_data) +{ + intptr_t n = (intptr_t)test_data; + + gpio_reset(n); + + writel(GPIO(n) + GP_N_EVTYP, 0x00000000); + writel(GPIO(n) + GP_N_DOUT, 0x00000000); + writel(GPIO(n) + GP_N_OE, 0xffffffff); + writel(GPIO(n) + GP_N_EVST, 0xffffffff); + writel(GPIO(n) + GP_N_EVEN, 0x00000000); + + /* Trigger an event; interrupts are masked. */ + g_assert_cmphex(readl(GPIO(n) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_DOS, 0x00008000); + g_assert_cmphex(readl(GPIO(n) + GP_N_EVST), ==, 0x00008000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Unmask all event interrupts; verify that the interrupt fired. */ + writel(GPIO(n) + GP_N_EVEN, 0xffffffff); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Clear the current bit, set a new bit, irq stays asserted. */ + writel(GPIO(n) + GP_N_DOC, 0x00008000); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_DOS, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVST, 0x00008000); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Mask/unmask the event that's currently active. */ + writel(GPIO(n) + GP_N_EVENC, 0x00000200); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVENS, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Clear the input and the status bit, irq is deasserted. */ + writel(GPIO(n) + GP_N_DOC, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVST, 0x00000200); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); +} + +int main(int argc, char **argv) +{ + int ret; + int i; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("/npcm7xx_gpio/dout_to_din", test_dout_to_din); + qtest_add_func("/npcm7xx_gpio/pullup_pulldown", test_pullup_pulldown); + qtest_add_func("/npcm7xx_gpio/output_enable", test_output_enable); + qtest_add_func("/npcm7xx_gpio/open_drain", test_open_drain); + qtest_add_func("/npcm7xx_gpio/polarity", test_polarity); + qtest_add_func("/npcm7xx_gpio/input_mask", test_input_mask); + qtest_add_func("/npcm7xx_gpio/temp_lock", test_temp_lock); + qtest_add_func("/npcm7xx_gpio/events/level", test_events_level); + qtest_add_func("/npcm7xx_gpio/events/rising_edge", test_events_rising_edge); + qtest_add_func("/npcm7xx_gpio/events/both_edges", test_events_both_edges); + + for (i = 0; i < NR_GPIO_DEVICES; i++) { + g_autofree char *test_name = + g_strdup_printf("/npcm7xx_gpio/gpio[%d]/irq", i); + qtest_add_data_func(test_name, (void *)(intptr_t)i, test_gpion_irq); + } + + qtest_start("-machine npcm750-evb"); + qtest_irq_intercept_in(global_qtest, "/machine/soc/a9mpcore/gic"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) softmmu_ss.add(when: 'CONFIG_ZAURUS', if_true: files('zaurus.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('imx_gpio.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_gpio.c')) softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_gpio.c')) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_gpio.c')) softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_gpio.c')) diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# npcm7xx_gpio.c +npcm7xx_gpio_read(const char *id, uint64_t offset, uint64_t value) " %s offset: 0x%04" PRIx64 " value 0x%08" PRIx64 +npcm7xx_gpio_write(const char *id, uint64_t offset, uint64_t value) "%s offset: 0x%04" PRIx64 " value 0x%08" PRIx64 +npcm7xx_gpio_set_input(const char *id, int32_t line, int32_t level) "%s line: %" PRIi32 " level: %" PRIi32 +npcm7xx_gpio_set_output(const char *id, int32_t line, int32_t level) "%s line: %" PRIi32 " level: %" PRIi32 +npcm7xx_gpio_update_events(const char *id, uint32_t evst, uint32_t even) "%s evst: 0x%08" PRIx32 " even: 0x%08" PRIx32 + # nrf51_gpio.c nrf51_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64 nrf51_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64 diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ ['prom-env-test', 'boot-serial-test'] qtests_npcm7xx = \ - ['npcm7xx_rng-test', + ['npcm7xx_gpio-test', + 'npcm7xx_rng-test', 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ -- 2.20.1 From: Zenghui Yu <yuzenghui@huawei.com> Ensure the vSMMUv3 will be restored before all PCIe devices so that DMA translation can work properly during migration. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20201019091508.197-1-yuzenghui@huawei.com Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, .minimum_version_id = 1, + .priority = MIG_PRI_IOMMU, .fields = (VMStateField[]) { VMSTATE_UINT32(features, SMMUv3State), VMSTATE_UINT8(sid_size, SMMUv3State), -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> No code out of bcm2836.c uses (or requires) the BCM283XInfo declarations. Move it locally to the C source file. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2836.h | 8 -------- hw/arm/bcm2836.c | 14 ++++++++++++++ 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ struct BCM283XState { BCM2835PeripheralState peripherals; }; -typedef struct BCM283XInfo BCM283XInfo; - -struct BCM283XClass { - DeviceClass parent_class; - const BCM283XInfo *info; -}; - - #endif /* BCM2836_H */ diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" +typedef struct BCM283XInfo BCM283XInfo; + +typedef struct BCM283XClass { + /*< private >*/ + DeviceClass parent_class; + /*< public >*/ + const BCM283XInfo *info; +} BCM283XClass; + struct BCM283XInfo { const char *name; const char *cpu_type; @@ -XXX,XX +XXX,XX @@ struct BCM283XInfo { int clusterid; }; +#define BCM283X_CLASS(klass) \ + OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) +#define BCM283X_GET_CLASS(obj) \ + OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) + static const BCM283XInfo bcm283x_socs[] = { { .name = TYPE_BCM2836, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Remove usage of TypeInfo::class_data. Instead fill the fields in the corresponding class_init(). So far all children use the same values for almost all fields, but we are going to add the BCM2711/BCM2838 SoC for the raspi4 machine which use different fields. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 108 ++++++++++++++++++++++------------------------- 1 file changed, 51 insertions(+), 57 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" -typedef struct BCM283XInfo BCM283XInfo; - typedef struct BCM283XClass { /*< private >*/ DeviceClass parent_class; /*< public >*/ - const BCM283XInfo *info; -} BCM283XClass; - -struct BCM283XInfo { const char *name; const char *cpu_type; hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; -}; +} BCM283XClass; #define BCM283X_CLASS(klass) \ OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) #define BCM283X_GET_CLASS(obj) \ OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) -static const BCM283XInfo bcm283x_socs[] = { - { - .name = TYPE_BCM2836, - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"), - .peri_base = 0x3f000000, - .ctrl_base = 0x40000000, - .clusterid = 0xf, - }, -#ifdef TARGET_AARCH64 - { - .name = TYPE_BCM2837, - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"), - .peri_base = 0x3f000000, - .ctrl_base = 0x40000000, - .clusterid = 0x0, - }, -#endif -}; - static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); BCM283XClass *bc = BCM283X_GET_CLASS(obj); - const BCM283XInfo *info = bc->info; int n; for (n = 0; n < BCM283X_NCPUS; n++) { object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, - info->cpu_type); + bc->cpu_type); } object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); BCM283XClass *bc = BCM283X_GET_CLASS(dev); - const BCM283XInfo *info = bc->info; Object *obj; int n; @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) "sd-bus"); sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0, - info->peri_base, 1); + bc->peri_base, 1); /* bcm2836 interrupt controller (and mailboxes, etc.) */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->control), errp)) { return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, info->ctrl_base); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, bc->ctrl_base); sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0, qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0)); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) for (n = 0; n < BCM283X_NCPUS; n++) { /* TODO: this should be converted to a property of ARM_CPU */ - s->cpu[n].core.mp_affinity = (info->clusterid << 8) | n; + s->cpu[n].core.mp_affinity = (bc->clusterid << 8) | n; /* set periphbase/CBAR value for CPU-local registers */ if (!object_property_set_int(OBJECT(&s->cpu[n].core), "reset-cbar", - info->peri_base, errp)) { + bc->peri_base, errp)) { return; } @@ -XXX,XX +XXX,XX @@ static Property bcm2836_props[] = { static void bcm283x_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); - BCM283XClass *bc = BCM283X_CLASS(oc); - bc->info = data; - dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); /* Reason: Must be wired up in code (see raspi_init() function) */ dc->user_creatable = false; } -static const TypeInfo bcm283x_type_info = { - .name = TYPE_BCM283X, - .parent = TYPE_DEVICE, - .instance_size = sizeof(BCM283XState), - .instance_init = bcm2836_init, - .class_size = sizeof(BCM283XClass), - .abstract = true, +static void bcm2836_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); + + bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + bc->peri_base = 0x3f000000; + bc->ctrl_base = 0x40000000; + bc->clusterid = 0xf; + dc->realize = bcm2836_realize; + device_class_set_props(dc, bcm2836_props); }; -static void bcm2836_register_types(void) +#ifdef TARGET_AARCH64 +static void bcm2837_class_init(ObjectClass *oc, void *data) { - int i; + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); - type_register_static(&bcm283x_type_info); - for (i = 0; i < ARRAY_SIZE(bcm283x_socs); i++) { - TypeInfo ti = { - .name = bcm283x_socs[i].name, - .parent = TYPE_BCM283X, - .class_init = bcm283x_class_init, - .class_data = (void *) &bcm283x_socs[i], - }; - type_register(&ti); + bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); + bc->peri_base = 0x3f000000; + bc->ctrl_base = 0x40000000; + bc->clusterid = 0x0; + dc->realize = bcm2836_realize; + device_class_set_props(dc, bcm2836_props); +}; +#endif + +static const TypeInfo bcm283x_types[] = { + { + .name = TYPE_BCM2836, + .parent = TYPE_BCM283X, + .class_init = bcm2836_class_init, +#ifdef TARGET_AARCH64 + }, { + .name = TYPE_BCM2837, + .parent = TYPE_BCM283X, + .class_init = bcm2837_class_init, +#endif + }, { + .name = TYPE_BCM283X, + .parent = TYPE_DEVICE, + .instance_size = sizeof(BCM283XState), + .instance_init = bcm2836_init, + .class_size = sizeof(BCM283XClass), + .class_init = bcm283x_class_init, + .abstract = true, } -} +}; -type_init(bcm2836_register_types) +DEFINE_TYPES(bcm283x_types) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The BCM2835 has only one core. Introduce the core_count field to be able to use values different than BCM283X_NCPUS (4). Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { /*< public >*/ const char *name; const char *cpu_type; + unsigned core_count; hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) BCM283XClass *bc = BCM283X_GET_CLASS(obj); int n; - for (n = 0; n < BCM283X_NCPUS; n++) { + for (n = 0; n < bc->core_count; n++) { object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, bc->cpu_type); } @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) BCM283XClass *bc = BCM283X_CLASS(oc); bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + bc->core_count = BCM283X_NCPUS; bc->peri_base = 0x3f000000; bc->ctrl_base = 0x40000000; bc->clusterid = 0xf; @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) BCM283XClass *bc = BCM283X_CLASS(oc); bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); + bc->core_count = BCM283X_NCPUS; bc->peri_base = 0x3f000000; bc->ctrl_base = 0x40000000; bc->clusterid = 0x0; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> It makes no sense to set enabled-cpus=0 on single core SoCs. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { #define BCM283X_GET_CLASS(obj) \ OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) +static Property bcm2836_enabled_cores_property = + DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0); + static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, bc->cpu_type); } + if (bc->core_count > 1) { + qdev_property_add_static(DEVICE(obj), &bcm2836_enabled_cores_property); + qdev_prop_set_uint32(DEVICE(obj), "enabled-cpus", bc->core_count); + } object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) } } -static Property bcm2836_props[] = { - DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, - BCM283X_NCPUS), - DEFINE_PROP_END_OF_LIST() -}; - static void bcm283x_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) bc->ctrl_base = 0x40000000; bc->clusterid = 0xf; dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); }; #ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) bc->ctrl_base = 0x40000000; bc->clusterid = 0x0; dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); }; #endif -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The realize() function is clearly composed of two parts, each described by a comment: void realize() { /* common peripherals from bcm2835 */ ... /* bcm2836 interrupt controller (and mailboxes, etc.) */ ... } Split the two part, so we can reuse the common part with other SoCs from this family. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) qdev_prop_set_uint32(DEVICE(obj), "enabled-cpus", bc->core_count); } - object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); + if (bc->ctrl_base) { + object_initialize_child(obj, "control", &s->control, + TYPE_BCM2836_CONTROL); + } object_initialize_child(obj, "peripherals", &s->peripherals, TYPE_BCM2835_PERIPHERALS); @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) "vcram-size"); } -static void bcm2836_realize(DeviceState *dev, Error **errp) +static bool bcm283x_common_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); BCM283XClass *bc = BCM283X_GET_CLASS(dev); Object *obj; - int n; /* common peripherals from bcm2835 */ @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) object_property_add_const_link(OBJECT(&s->peripherals), "ram", obj); if (!sysbus_realize(SYS_BUS_DEVICE(&s->peripherals), errp)) { - return; + return false; } object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->peripherals), @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0, bc->peri_base, 1); + return true; +} + +static void bcm2836_realize(DeviceState *dev, Error **errp) +{ + BCM283XState *s = BCM283X(dev); + BCM283XClass *bc = BCM283X_GET_CLASS(dev); + int n; + + if (!bcm283x_common_realize(dev, errp)) { + return; + } /* bcm2836 interrupt controller (and mailboxes, etc.) */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->control), errp)) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-7-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2836.h | 1 + hw/arm/bcm2836.c | 34 ++++++++++++++++++++++++++++++++++ hw/arm/raspi.c | 2 ++ 3 files changed, 37 insertions(+) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) * them, code using these devices should always handle them via the * BCM283x base class, so they have no BCM2836(obj) etc macros. */ +#define TYPE_BCM2835 "bcm2835" #define TYPE_BCM2836 "bcm2836" #define TYPE_BCM2837 "bcm2837" diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static bool bcm283x_common_realize(DeviceState *dev, Error **errp) return true; } +static void bcm2835_realize(DeviceState *dev, Error **errp) +{ + BCM283XState *s = BCM283X(dev); + + if (!bcm283x_common_realize(dev, errp)) { + return; + } + + if (!qdev_realize(DEVICE(&s->cpu[0].core), NULL, errp)) { + return; + } + + /* Connect irq/fiq outputs from the interrupt controller. */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0, + qdev_get_gpio_in(DEVICE(&s->cpu[0].core), ARM_CPU_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1, + qdev_get_gpio_in(DEVICE(&s->cpu[0].core), ARM_CPU_FIQ)); +} + static void bcm2836_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); @@ -XXX,XX +XXX,XX @@ static void bcm283x_class_init(ObjectClass *oc, void *data) dc->user_creatable = false; } +static void bcm2835_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); + + bc->cpu_type = ARM_CPU_TYPE_NAME("arm1176"); + bc->core_count = 1; + bc->peri_base = 0x20000000; + dc->realize = bcm2835_realize; +}; + static void bcm2836_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) static const TypeInfo bcm283x_types[] = { { + .name = TYPE_BCM2835, + .parent = TYPE_BCM283X, + .class_init = bcm2835_class_init, + }, { .name = TYPE_BCM2836, .parent = TYPE_BCM283X, .class_init = bcm2836_class_init, diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ FIELD(REV_CODE, MEMORY_SIZE, 20, 3); FIELD(REV_CODE, STYLE, 23, 1); typedef enum RaspiProcessorId { + PROCESSOR_ID_BCM2835 = 0, PROCESSOR_ID_BCM2836 = 1, PROCESSOR_ID_BCM2837 = 2, } RaspiProcessorId; @@ -XXX,XX +XXX,XX @@ static const struct { const char *type; int cores_count; } soc_property[] = { + [PROCESSOR_ID_BCM2835] = {TYPE_BCM2835, 1}, [PROCESSOR_ID_BCM2836] = {TYPE_BCM2836, BCM283X_NCPUS}, [PROCESSOR_ID_BCM2837] = {TYPE_BCM2837, BCM283X_NCPUS}, }; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Pi A is almost the first machine released. It uses a BCM2835 SoC which includes a ARMv6Z core. Example booting the machine using content from [*] (we use the device tree from the B model): $ qemu-system-arm -M raspi1ap -serial stdio \ -kernel raspberrypi/firmware/boot/kernel.img \ -dtb raspberrypi/firmware/boot/bcm2708-rpi-b-plus.dtb \ -append 'earlycon=pl011,0x20201000 console=ttyAMA0' [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B+ ... [*] http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20200512-2_armhf.deb Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_machine_class_common_init(MachineClass *mc, mc->default_ram_id = "ram"; }; +static void raspi1ap_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x900021; /* Revision 1.1 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi2b_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void raspi3b_machine_class_init(ObjectClass *oc, void *data) static const TypeInfo raspi_machine_types[] = { { + .name = MACHINE_TYPE_NAME("raspi1ap"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi1ap_machine_class_init, + }, { .name = MACHINE_TYPE_NAME("raspi2b"), .parent = TYPE_RASPI_MACHINE, .class_init = raspi2b_machine_class_init, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Similarly to the Pi A, the Pi Zero uses a BCM2835 SoC (ARMv6Z core). The only difference between the revision 1.2 and 1.3 is the latter exposes a CSI camera connector. As we do not implement the Unicam peripheral, there is no point in exposing a camera connector :) Therefore we choose to model the 1.2 revision. Example booting the machine using content from [*]: $ qemu-system-arm -M raspi0 -serial stdio \ -kernel raspberrypi/firmware/boot/kernel.img \ -dtb raspberrypi/firmware/boot/bcm2708-rpi-zero.dtb \ -append 'printk.time=0 earlycon=pl011,0x20201000 console=ttyAMA0' [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero ... [*] http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20200512-2_armhf.deb Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-9-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_machine_class_common_init(MachineClass *mc, mc->default_ram_id = "ram"; }; +static void raspi0_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x920092; /* Revision 1.2 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi1ap_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void raspi3b_machine_class_init(ObjectClass *oc, void *data) static const TypeInfo raspi_machine_types[] = { { + .name = MACHINE_TYPE_NAME("raspi0"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi0_machine_class_init, + }, { .name = MACHINE_TYPE_NAME("raspi1ap"), .parent = TYPE_RASPI_MACHINE, .class_init = raspi1ap_machine_class_init, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Pi 3A+ is a stripped down version of the 3B: - 512 MiB of RAM instead of 1 GiB - no on-board ethernet chipset Add it as it is a closer match to what we model. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi2b_machine_class_init(ObjectClass *oc, void *data) }; #ifdef TARGET_AARCH64 +static void raspi3ap_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x9020e0; /* Revision 1.0 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi3b_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const TypeInfo raspi_machine_types[] = { .parent = TYPE_RASPI_MACHINE, .class_init = raspi2b_machine_class_init, #ifdef TARGET_AARCH64 + }, { + .name = MACHINE_TYPE_NAME("raspi3ap"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi3ap_machine_class_init, }, { .name = MACHINE_TYPE_NAME("raspi3b"), .parent = TYPE_RASPI_MACHINE, -- 2.20.1 From: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Use of 0x%d - make up our mind as 0x%x Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Eric Auger <eric.auger@redhat.com> Message-id: 20201014193355.53074-1-dgilbert@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/trace-events | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/trace-events b/hw/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/trace-events +++ b/hw/arm/trace-events @@ -XXX,XX +XXX,XX @@ smmuv3_get_cd(uint64_t addr) "CD addr: 0x%"PRIx64 smmuv3_decode_cd(uint32_t oas) "oas=%d" smmuv3_decode_cd_tt(int i, uint32_t tsz, uint64_t ttb, uint32_t granule_sz, bool had) "TT[%d]:tsz:%d ttb:0x%"PRIx64" granule_sz:%d had:%d" smmuv3_cmdq_cfgi_ste(int streamid) "streamid =%d" -smmuv3_cmdq_cfgi_ste_range(int start, int end) "start=0x%d - end=0x%d" +smmuv3_cmdq_cfgi_ste_range(int start, int end) "start=0x%x - end=0x%x" smmuv3_cmdq_cfgi_cd(uint32_t sid) "streamid = %d" smmuv3_config_cache_hit(uint32_t sid, uint32_t hits, uint32_t misses, uint32_t perc) "Config cache HIT for sid %d (hits=%d, misses=%d, hit rate=%d)" smmuv3_config_cache_miss(uint32_t sid, uint32_t hits, uint32_t misses, uint32_t perc) "Config cache MISS for sid %d (hits=%d, misses=%d, hit rate=%d)" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ extern const VMStateDescription vmstate_clock; VMSTATE_CLOCK_V(field, state, 0) #define VMSTATE_CLOCK_V(field, state, version) \ VMSTATE_STRUCT_POINTER_V(field, state, version, vmstate_clock, Clock) +#define VMSTATE_ARRAY_CLOCK(field, state, num) \ + VMSTATE_ARRAY_CLOCK_V(field, state, num, 0) +#define VMSTATE_ARRAY_CLOCK_V(field, state, num, version) \ + VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(field, state, num, version, \ + vmstate_clock, Clock) /** * clock_setup_canonical_path: -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The nanosecond unit greatly limits the dynamic range we can display in clock value traces, for values in the order of 1GHz and more. The internal representation can go way beyond this value and it is quite common for today's clocks to be within those ranges. For example, a frequency between 500MHz+ and 1GHz will be displayed as 1ns. Beyond 1GHz, it will show up as 0ns. Replace nanosecond periods traces with frequencies in the Hz unit to have more dynamic range in the trace output. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/clock.c | 6 +++--- hw/core/trace-events | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/hw/core/clock.c b/hw/core/clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/clock.c +++ b/hw/core/clock.c @@ -XXX,XX +XXX,XX @@ bool clock_set(Clock *clk, uint64_t period) if (clk->period == period) { return false; } - trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_NS(clk->period), - CLOCK_PERIOD_TO_NS(period)); + trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_HZ(clk->period), + CLOCK_PERIOD_TO_HZ(period)); clk->period = period; return true; @@ -XXX,XX +XXX,XX @@ static void clock_propagate_period(Clock *clk, bool call_callbacks) if (child->period != clk->period) { child->period = clk->period; trace_clock_update(CLOCK_PATH(child), CLOCK_PATH(clk), - CLOCK_PERIOD_TO_NS(clk->period), + CLOCK_PERIOD_TO_HZ(clk->period), call_callbacks); if (call_callbacks && child->callback) { child->callback(child->callback_opaque); diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ resettable_transitional_function(void *obj, const char *objtype) "obj=%p(%s)" # clock.c clock_set_source(const char *clk, const char *src) "'%s', src='%s'" clock_disconnect(const char *clk) "'%s'" -clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', ns=%"PRIu64"->%"PRIu64 +clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', %"PRIu64"Hz->%"PRIu64"Hz" clock_propagate(const char *clk) "'%s'" -clock_update(const char *clk, const char *src, uint64_t val, int cb) "'%s', src='%s', ns=%"PRIu64", cb=%d" +clock_update(const char *clk, const char *src, uint64_t hz, int cb) "'%s', src='%s', val=%"PRIu64"Hz cb=%d" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The CPRMAN (clock controller) was mapped at the watchdog/power manager address. It was also split into two unimplemented peripherals (CM and A2W) but this is really the same one, as shown by this extract of the Raspberry Pi 3 Linux device tree: watchdog@7e100000 { compatible = "brcm,bcm2835-pm\0brcm,bcm2835-pm-wdt"; [...] reg = <0x7e100000 0x114 0x7e00a000 0x24>; [...] }; [...] cprman@7e101000 { compatible = "brcm,bcm2835-cprman"; [...] reg = <0x7e101000 0x2000>; [...] }; Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 2 +- include/hw/arm/raspi_platform.h | 5 ++--- hw/arm/bcm2835_peripherals.c | 4 ++-- 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ struct BCM2835PeripheralState { BCM2835MphiState mphi; UnimplementedDeviceState txp; UnimplementedDeviceState armtmr; + UnimplementedDeviceState powermgt; UnimplementedDeviceState cprman; - UnimplementedDeviceState a2w; PL011State uart0; BCM2835AuxState aux; BCM2835FBState fb; diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/raspi_platform.h +++ b/include/hw/arm/raspi_platform.h @@ -XXX,XX +XXX,XX @@ #define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 (SP804) */ #define ARMCTRL_0_SBM_OFFSET (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores * Doorbells & Mailboxes */ -#define CPRMAN_OFFSET 0x100000 /* Power Management, Watchdog */ -#define CM_OFFSET 0x101000 /* Clock Management */ -#define A2W_OFFSET 0x102000 /* Reset controller */ +#define PM_OFFSET 0x100000 /* Power Management */ +#define CPRMAN_OFFSET 0x101000 /* Clock Management */ #define AVS_OFFSET 0x103000 /* Audio Video Standard */ #define RNG_OFFSET 0x104000 #define GPIO_OFFSET 0x200000 diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000); create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); - create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); - create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); + create_unimp(s, &s->powermgt, "bcm2835-powermgt", PM_OFFSET, 0x114); + create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x2000); create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100); create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100); create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a main oscillator, and several sub-components (PLLs, multiplexers, ...) to generate the BCM2835 clock tree. This commit adds a skeleton of the CPRMAN, with a dummy register read/write implementation. It embeds the main oscillator (xosc) from which all the clocks will be derived. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 3 +- include/hw/misc/bcm2835_cprman.h | 37 +++++ include/hw/misc/bcm2835_cprman_internals.h | 24 +++ hw/arm/bcm2835_peripherals.c | 11 +- hw/misc/bcm2835_cprman.c | 163 +++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 5 + 7 files changed, 242 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/bcm2835_cprman.h create mode 100644 include/hw/misc/bcm2835_cprman_internals.h create mode 100644 hw/misc/bcm2835_cprman.c diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_mbox.h" #include "hw/misc/bcm2835_mphi.h" #include "hw/misc/bcm2835_thermal.h" +#include "hw/misc/bcm2835_cprman.h" #include "hw/sd/sdhci.h" #include "hw/sd/bcm2835_sdhost.h" #include "hw/gpio/bcm2835_gpio.h" @@ -XXX,XX +XXX,XX @@ struct BCM2835PeripheralState { UnimplementedDeviceState txp; UnimplementedDeviceState armtmr; UnimplementedDeviceState powermgt; - UnimplementedDeviceState cprman; + BCM2835CprmanState cprman; PL011State uart0; BCM2835AuxState aux; BCM2835FBState fb; diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_CPRMAN_H +#define HW_MISC_CPRMAN_H + +#include "hw/sysbus.h" +#include "hw/qdev-clock.h" + +#define TYPE_BCM2835_CPRMAN "bcm2835-cprman" + +typedef struct BCM2835CprmanState BCM2835CprmanState; + +DECLARE_INSTANCE_CHECKER(BCM2835CprmanState, CPRMAN, + TYPE_BCM2835_CPRMAN) + +#define CPRMAN_NUM_REGS (0x2000 / sizeof(uint32_t)) + +struct BCM2835CprmanState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t regs[CPRMAN_NUM_REGS]; + uint32_t xosc_freq; + + Clock *xosc; +}; + +#endif diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_CPRMAN_INTERNALS_H +#define HW_MISC_CPRMAN_INTERNALS_H + +#include "hw/registerfields.h" +#include "hw/misc/bcm2835_cprman.h" + +/* Register map */ + +/* + * This field is common to all registers. Each register write value must match + * the CPRMAN_PASSWORD magic value in its 8 MSB. + */ +FIELD(CPRMAN, PASSWORD, 24, 8) +#define CPRMAN_PASSWORD 0x5a + +#endif diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) /* DWC2 */ object_initialize_child(obj, "dwc2", &s->dwc2, TYPE_DWC2_USB); + /* CPRMAN clock manager */ + object_initialize_child(obj, "cprman", &s->cprman, TYPE_BCM2835_CPRMAN); + object_property_add_const_link(OBJECT(&s->dwc2), "dma-mr", OBJECT(&s->gpu_bus_mr)); } @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) return; } + /* CPRMAN clock manager */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->cprman), errp)) { + return; + } + memory_region_add_subregion(&s->peri_mr, CPRMAN_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cprman), 0)); + memory_region_add_subregion(&s->peri_mr, ARMCTRL_IC_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ic), 0)); sysbus_pass_irq(SYS_BUS_DEVICE(s), SYS_BUS_DEVICE(&s->ic)); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000); create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->powermgt, "bcm2835-powermgt", PM_OFFSET, 0x114); - create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x2000); create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100); create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100); create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20); diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * This peripheral is roughly divided into 3 main parts: + * - the PLLs + * - the PLL channels + * - the clock muxes + * + * A main oscillator (xosc) feeds all the PLLs. Each PLLs has one or more + * channels. Those channel are then connected to the clock muxes. Each mux has + * multiples sources (usually the xosc, some of the PLL channels and some "test + * debug" clocks). A mux is configured to select a given source through its + * control register. Each mux has one output clock that also goes out of the + * CPRMAN. This output clock usually connects to another peripheral in the SoC + * (so a given mux is dedicated to a peripheral). + * + * At each level (PLL, channel and mux), the clock can be altered through + * dividers (and multipliers in case of the PLLs), and can be disabled (in this + * case, the next levels see no clock). + * + * This can be sum-up as follows (this is an example and not the actual BCM2835 + * clock tree): + * + * /-->[PLL]-|->[PLL channel]--... [mux]--> to peripherals + * | |->[PLL channel] muxes takes [mux] + * | \->[PLL channel] inputs from [mux] + * | some channels [mux] + * [xosc]---|-->[PLL]-|->[PLL channel] and other srcs [mux] + * | \->[PLL channel] ...-->[mux] + * | [mux] + * \-->[PLL]--->[PLL channel] [mux] + * + * The page at https://elinux.org/The_Undocumented_Pi gives the actual clock + * tree configuration. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "hw/misc/bcm2835_cprman.h" +#include "hw/misc/bcm2835_cprman_internals.h" +#include "trace.h" + +/* CPRMAN "top level" model */ + +static uint64_t cprman_read(void *opaque, hwaddr offset, + unsigned size) +{ + BCM2835CprmanState *s = CPRMAN(opaque); + uint64_t r = 0; + size_t idx = offset / sizeof(uint32_t); + + switch (idx) { + default: + r = s->regs[idx]; + } + + trace_bcm2835_cprman_read(offset, r); + return r; +} + +static void cprman_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + BCM2835CprmanState *s = CPRMAN(opaque); + size_t idx = offset / sizeof(uint32_t); + + if (FIELD_EX32(value, CPRMAN, PASSWORD) != CPRMAN_PASSWORD) { + trace_bcm2835_cprman_write_invalid_magic(offset, value); + return; + } + + value &= ~R_CPRMAN_PASSWORD_MASK; + + trace_bcm2835_cprman_write(offset, value); + s->regs[idx] = value; + +} + +static const MemoryRegionOps cprman_ops = { + .read = cprman_read, + .write = cprman_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + /* + * Although this hasn't been checked against real hardware, nor the + * information can be found in a datasheet, it seems reasonable because + * of the "PASSWORD" magic value found in every registers. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, + .impl = { + .max_access_size = 4, + }, +}; + +static void cprman_reset(DeviceState *dev) +{ + BCM2835CprmanState *s = CPRMAN(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + clock_update_hz(s->xosc, s->xosc_freq); +} + +static void cprman_init(Object *obj) +{ + BCM2835CprmanState *s = CPRMAN(obj); + + s->xosc = clock_new(obj, "xosc"); + + memory_region_init_io(&s->iomem, obj, &cprman_ops, + s, "bcm2835-cprman", 0x2000); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); +} + +static const VMStateDescription cprman_vmstate = { + .name = TYPE_BCM2835_CPRMAN, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, BCM2835CprmanState, CPRMAN_NUM_REGS), + VMSTATE_END_OF_LIST() + } +}; + +static Property cprman_properties[] = { + DEFINE_PROP_UINT32("xosc-freq-hz", BCM2835CprmanState, xosc_freq, 19200000), + DEFINE_PROP_END_OF_LIST() +}; + +static void cprman_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = cprman_reset; + dc->vmsd = &cprman_vmstate; + device_class_set_props(dc, cprman_properties); +} + +static const TypeInfo cprman_info = { + .name = TYPE_BCM2835_CPRMAN, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835CprmanState), + .class_init = cprman_class_init, + .instance_init = cprman_init, +}; + +static void cprman_register_types(void) +{ + type_register_static(&cprman_info); +} + +type_init(cprman_register_types); diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files( 'bcm2835_property.c', 'bcm2835_rng.c', 'bcm2835_thermal.c', + 'bcm2835_cprman.c', )) softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c')) softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c', 'zynq-xadc.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ grlib_apb_pnp_read(uint64_t addr, uint32_t value) "APB PnP read addr:0x%03"PRIx6 # pca9552.c pca955x_gpio_status(const char *description, const char *buf) "%s GPIOs 0-15 [%s]" pca955x_gpio_change(const char *description, unsigned id, unsigned prev_state, unsigned current_state) "%s GPIO id:%u status: %u -> %u" + +# bcm2835_cprman.c +bcm2835_cprman_read(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 +bcm2835_cprman_write(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 +bcm2835_cprman_write_invalid_magic(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 -- 2.20.1 From: Luc Michel <luc@lmichel.fr> There are 5 PLLs in the CPRMAN, namely PLL A, C, D, H and B. All of them take the xosc clock as input and produce a new clock. This commit adds a skeleton implementation for the PLLs as sub-devices of the CPRMAN. The PLLs are instantiated and connected internally to the main oscillator. Each PLL has 6 registers : CM, A2W_CTRL, A2W_ANA[0,1,2,3], A2W_FRAC. A write to any of them triggers a call to the (not yet implemented) pll_update function. If the main oscillator changes frequency, an update is also triggered. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 29 +++++ include/hw/misc/bcm2835_cprman_internals.h | 144 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 108 ++++++++++++++++ 3 files changed, 281 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(BCM2835CprmanState, CPRMAN, #define CPRMAN_NUM_REGS (0x2000 / sizeof(uint32_t)) +typedef enum CprmanPll { + CPRMAN_PLLA = 0, + CPRMAN_PLLC, + CPRMAN_PLLD, + CPRMAN_PLLH, + CPRMAN_PLLB, + + CPRMAN_NUM_PLL +} CprmanPll; + +typedef struct CprmanPllState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanPll id; + + uint32_t *reg_cm; + uint32_t *reg_a2w_ctrl; + uint32_t *reg_a2w_ana; /* ANA[0] .. ANA[3] */ + uint32_t prediv_mask; /* prediv bit in ana[1] */ + uint32_t *reg_a2w_frac; + + Clock *xosc_in; + Clock *out; +} CprmanPllState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { /*< public >*/ MemoryRegion iomem; + CprmanPllState plls[CPRMAN_NUM_PLL]; + uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #include "hw/registerfields.h" #include "hw/misc/bcm2835_cprman.h" +#define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" + +DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, + TYPE_CPRMAN_PLL) + /* Register map */ +/* PLLs */ +REG32(CM_PLLA, 0x104) + FIELD(CM_PLLA, LOADDSI0, 0, 1) + FIELD(CM_PLLA, HOLDDSI0, 1, 1) + FIELD(CM_PLLA, LOADCCP2, 2, 1) + FIELD(CM_PLLA, HOLDCCP2, 3, 1) + FIELD(CM_PLLA, LOADCORE, 4, 1) + FIELD(CM_PLLA, HOLDCORE, 5, 1) + FIELD(CM_PLLA, LOADPER, 6, 1) + FIELD(CM_PLLA, HOLDPER, 7, 1) + FIELD(CM_PLLx, ANARST, 8, 1) +REG32(CM_PLLC, 0x108) + FIELD(CM_PLLC, LOADCORE0, 0, 1) + FIELD(CM_PLLC, HOLDCORE0, 1, 1) + FIELD(CM_PLLC, LOADCORE1, 2, 1) + FIELD(CM_PLLC, HOLDCORE1, 3, 1) + FIELD(CM_PLLC, LOADCORE2, 4, 1) + FIELD(CM_PLLC, HOLDCORE2, 5, 1) + FIELD(CM_PLLC, LOADPER, 6, 1) + FIELD(CM_PLLC, HOLDPER, 7, 1) +REG32(CM_PLLD, 0x10c) + FIELD(CM_PLLD, LOADDSI0, 0, 1) + FIELD(CM_PLLD, HOLDDSI0, 1, 1) + FIELD(CM_PLLD, LOADDSI1, 2, 1) + FIELD(CM_PLLD, HOLDDSI1, 3, 1) + FIELD(CM_PLLD, LOADCORE, 4, 1) + FIELD(CM_PLLD, HOLDCORE, 5, 1) + FIELD(CM_PLLD, LOADPER, 6, 1) + FIELD(CM_PLLD, HOLDPER, 7, 1) +REG32(CM_PLLH, 0x110) + FIELD(CM_PLLH, LOADPIX, 0, 1) + FIELD(CM_PLLH, LOADAUX, 1, 1) + FIELD(CM_PLLH, LOADRCAL, 2, 1) +REG32(CM_PLLB, 0x170) + FIELD(CM_PLLB, LOADARM, 0, 1) + FIELD(CM_PLLB, HOLDARM, 1, 1) + +REG32(A2W_PLLA_CTRL, 0x1100) + FIELD(A2W_PLLx_CTRL, NDIV, 0, 10) + FIELD(A2W_PLLx_CTRL, PDIV, 12, 3) + FIELD(A2W_PLLx_CTRL, PWRDN, 16, 1) + FIELD(A2W_PLLx_CTRL, PRST_DISABLE, 17, 1) +REG32(A2W_PLLC_CTRL, 0x1120) +REG32(A2W_PLLD_CTRL, 0x1140) +REG32(A2W_PLLH_CTRL, 0x1160) +REG32(A2W_PLLB_CTRL, 0x11e0) + +REG32(A2W_PLLA_ANA0, 0x1010) +REG32(A2W_PLLA_ANA1, 0x1014) + FIELD(A2W_PLLx_ANA1, FB_PREDIV, 14, 1) +REG32(A2W_PLLA_ANA2, 0x1018) +REG32(A2W_PLLA_ANA3, 0x101c) + +REG32(A2W_PLLC_ANA0, 0x1030) +REG32(A2W_PLLC_ANA1, 0x1034) +REG32(A2W_PLLC_ANA2, 0x1038) +REG32(A2W_PLLC_ANA3, 0x103c) + +REG32(A2W_PLLD_ANA0, 0x1050) +REG32(A2W_PLLD_ANA1, 0x1054) +REG32(A2W_PLLD_ANA2, 0x1058) +REG32(A2W_PLLD_ANA3, 0x105c) + +REG32(A2W_PLLH_ANA0, 0x1070) +REG32(A2W_PLLH_ANA1, 0x1074) + FIELD(A2W_PLLH_ANA1, FB_PREDIV, 11, 1) +REG32(A2W_PLLH_ANA2, 0x1078) +REG32(A2W_PLLH_ANA3, 0x107c) + +REG32(A2W_PLLB_ANA0, 0x10f0) +REG32(A2W_PLLB_ANA1, 0x10f4) +REG32(A2W_PLLB_ANA2, 0x10f8) +REG32(A2W_PLLB_ANA3, 0x10fc) + +REG32(A2W_PLLA_FRAC, 0x1200) + FIELD(A2W_PLLx_FRAC, FRAC, 0, 20) +REG32(A2W_PLLC_FRAC, 0x1220) +REG32(A2W_PLLD_FRAC, 0x1240) +REG32(A2W_PLLH_FRAC, 0x1260) +REG32(A2W_PLLB_FRAC, 0x12e0) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. @@ -XXX,XX +XXX,XX @@ FIELD(CPRMAN, PASSWORD, 24, 8) #define CPRMAN_PASSWORD 0x5a +/* PLL init info */ +typedef struct PLLInitInfo { + const char *name; + size_t cm_offset; + size_t a2w_ctrl_offset; + size_t a2w_ana_offset; + uint32_t prediv_mask; /* Prediv bit in ana[1] */ + size_t a2w_frac_offset; +} PLLInitInfo; + +#define FILL_PLL_INIT_INFO(pll_) \ + .cm_offset = R_CM_ ## pll_, \ + .a2w_ctrl_offset = R_A2W_ ## pll_ ## _CTRL, \ + .a2w_ana_offset = R_A2W_ ## pll_ ## _ANA0, \ + .a2w_frac_offset = R_A2W_ ## pll_ ## _FRAC + +static const PLLInitInfo PLL_INIT_INFO[] = { + [CPRMAN_PLLA] = { + .name = "plla", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLA), + }, + [CPRMAN_PLLC] = { + .name = "pllc", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLC), + }, + [CPRMAN_PLLD] = { + .name = "plld", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLD), + }, + [CPRMAN_PLLH] = { + .name = "pllh", + .prediv_mask = R_A2W_PLLH_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLH), + }, + [CPRMAN_PLLB] = { + .name = "pllb", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLB), + }, +}; + +#undef FILL_PLL_CHANNEL_INIT_INFO + +static inline void set_pll_init_info(BCM2835CprmanState *s, + CprmanPllState *pll, + CprmanPll id) +{ + pll->id = id; + pll->reg_cm = &s->regs[PLL_INIT_INFO[id].cm_offset]; + pll->reg_a2w_ctrl = &s->regs[PLL_INIT_INFO[id].a2w_ctrl_offset]; + pll->reg_a2w_ana = &s->regs[PLL_INIT_INFO[id].a2w_ana_offset]; + pll->prediv_mask = PLL_INIT_INFO[id].prediv_mask; + pll->reg_a2w_frac = &s->regs[PLL_INIT_INFO[id].a2w_frac_offset]; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_cprman_internals.h" #include "trace.h" +/* PLL */ + +static void pll_update(CprmanPllState *pll) +{ + clock_update(pll->out, 0); +} + +static void pll_xosc_update(void *opaque) +{ + pll_update(CPRMAN_PLL(opaque)); +} + +static void pll_init(Object *obj) +{ + CprmanPllState *s = CPRMAN_PLL(obj); + + s->xosc_in = qdev_init_clock_in(DEVICE(s), "xosc-in", pll_xosc_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription pll_vmstate = { + .name = TYPE_CPRMAN_PLL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(xosc_in, CprmanPllState), + VMSTATE_END_OF_LIST() + } +}; + +static void pll_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &pll_vmstate; +} + +static const TypeInfo cprman_pll_info = { + .name = TYPE_CPRMAN_PLL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanPllState), + .class_init = pll_class_init, + .instance_init = pll_init, +}; + + /* CPRMAN "top level" model */ static uint64_t cprman_read(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, return r; } +#define CASE_PLL_REGS(pll_) \ + case R_CM_ ## pll_: \ + case R_A2W_ ## pll_ ## _CTRL: \ + case R_A2W_ ## pll_ ## _ANA0: \ + case R_A2W_ ## pll_ ## _ANA1: \ + case R_A2W_ ## pll_ ## _ANA2: \ + case R_A2W_ ## pll_ ## _ANA3: \ + case R_A2W_ ## pll_ ## _FRAC + static void cprman_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, trace_bcm2835_cprman_write(offset, value); s->regs[idx] = value; + switch (idx) { + CASE_PLL_REGS(PLLA) : + pll_update(&s->plls[CPRMAN_PLLA]); + break; + + CASE_PLL_REGS(PLLC) : + pll_update(&s->plls[CPRMAN_PLLC]); + break; + + CASE_PLL_REGS(PLLD) : + pll_update(&s->plls[CPRMAN_PLLD]); + break; + + CASE_PLL_REGS(PLLH) : + pll_update(&s->plls[CPRMAN_PLLH]); + break; + + CASE_PLL_REGS(PLLB) : + pll_update(&s->plls[CPRMAN_PLLB]); + break; + } } +#undef CASE_PLL_REGS + static const MemoryRegionOps cprman_ops = { .read = cprman_read, .write = cprman_write, @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cprman_ops = { static void cprman_reset(DeviceState *dev) { BCM2835CprmanState *s = CPRMAN(dev); + size_t i; memset(s->regs, 0, sizeof(s->regs)); + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + device_cold_reset(DEVICE(&s->plls[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } static void cprman_init(Object *obj) { BCM2835CprmanState *s = CPRMAN(obj); + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + object_initialize_child(obj, PLL_INIT_INFO[i].name, + &s->plls[i], TYPE_CPRMAN_PLL); + set_pll_init_info(s, &s->plls[i], i); + } s->xosc = clock_new(obj, "xosc"); @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void cprman_realize(DeviceState *dev, Error **errp) +{ + BCM2835CprmanState *s = CPRMAN(dev); + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + CprmanPllState *pll = &s->plls[i]; + + clock_set_source(pll->xosc_in, s->xosc); + + if (!qdev_realize(DEVICE(pll), NULL, errp)) { + return; + } + } +} + static const VMStateDescription cprman_vmstate = { .name = TYPE_BCM2835_CPRMAN, .version_id = 1, @@ -XXX,XX +XXX,XX @@ static void cprman_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = cprman_realize; dc->reset = cprman_reset; dc->vmsd = &cprman_vmstate; device_class_set_props(dc, cprman_properties); @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_info = { static void cprman_register_types(void) { type_register_static(&cprman_info); + type_register_static(&cprman_pll_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The CPRMAN PLLs generate a clock based on a prescaler, a multiplier and a divider. The prescaler doubles the parent (xosc) frequency, then the multiplier/divider are applied. The multiplier has an integer and a fractional part. This commit also implements the CPRMAN CM_LOCK register. This register reports which PLL is currently locked. We consider a PLL has being locked as soon as it is enabled (on real hardware, there is a delay after turning a PLL on, for it to stabilize). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman_internals.h | 8 +++ hw/misc/bcm2835_cprman.c | 64 +++++++++++++++++++++- 2 files changed, 71 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLD_FRAC, 0x1240) REG32(A2W_PLLH_FRAC, 0x1260) REG32(A2W_PLLB_FRAC, 0x12e0) +/* misc registers */ +REG32(CM_LOCK, 0x114) + FIELD(CM_LOCK, FLOCKH, 12, 1) + FIELD(CM_LOCK, FLOCKD, 11, 1) + FIELD(CM_LOCK, FLOCKC, 10, 1) + FIELD(CM_LOCK, FLOCKB, 9, 1) + FIELD(CM_LOCK, FLOCKA, 8, 1) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ /* PLL */ +static bool pll_is_locked(const CprmanPllState *pll) +{ + return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN) + && !FIELD_EX32(*pll->reg_cm, CM_PLLx, ANARST); +} + static void pll_update(CprmanPllState *pll) { - clock_update(pll->out, 0); + uint64_t freq, ndiv, fdiv, pdiv; + + if (!pll_is_locked(pll)) { + clock_update(pll->out, 0); + return; + } + + pdiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PDIV); + + if (!pdiv) { + clock_update(pll->out, 0); + return; + } + + ndiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, NDIV); + fdiv = FIELD_EX32(*pll->reg_a2w_frac, A2W_PLLx_FRAC, FRAC); + + if (pll->reg_a2w_ana[1] & pll->prediv_mask) { + /* The prescaler doubles the parent frequency */ + ndiv *= 2; + fdiv *= 2; + } + + /* + * We have a multiplier with an integer part (ndiv) and a fractional part + * (fdiv), and a divider (pdiv). + */ + freq = clock_get_hz(pll->xosc_in) * + ((ndiv << R_A2W_PLLx_FRAC_FRAC_LENGTH) + fdiv); + freq /= pdiv; + freq >>= R_A2W_PLLx_FRAC_FRAC_LENGTH; + + clock_update_hz(pll->out, freq); } static void pll_xosc_update(void *opaque) @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* CPRMAN "top level" model */ +static uint32_t get_cm_lock(const BCM2835CprmanState *s) +{ + static const int CM_LOCK_MAPPING[CPRMAN_NUM_PLL] = { + [CPRMAN_PLLA] = R_CM_LOCK_FLOCKA_SHIFT, + [CPRMAN_PLLC] = R_CM_LOCK_FLOCKC_SHIFT, + [CPRMAN_PLLD] = R_CM_LOCK_FLOCKD_SHIFT, + [CPRMAN_PLLH] = R_CM_LOCK_FLOCKH_SHIFT, + [CPRMAN_PLLB] = R_CM_LOCK_FLOCKB_SHIFT, + }; + + uint32_t r = 0; + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + r |= pll_is_locked(&s->plls[i]) << CM_LOCK_MAPPING[i]; + } + + return r; +} + static uint64_t cprman_read(void *opaque, hwaddr offset, unsigned size) { @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, size_t idx = offset / sizeof(uint32_t); switch (idx) { + case R_CM_LOCK: + r = get_cm_lock(s); + break; + default: r = s->regs[idx]; } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> PLLs are composed of multiple channels. Each channel outputs one clock signal. They are modeled as one device taking the PLL generated clock as input, and outputting a new clock. A channel shares the CM register with its parent PLL, and has its own A2W_CTRL register. A write to the CM register will trigger an update of the PLL and all its channels, while a write to an A2W_CTRL channel register will update the required channel only. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 44 ++++++ include/hw/misc/bcm2835_cprman_internals.h | 146 +++++++++++++++++++ hw/misc/bcm2835_cprman.c | 155 +++++++++++++++++++-- 3 files changed, 337 insertions(+), 8 deletions(-) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef enum CprmanPll { CPRMAN_NUM_PLL } CprmanPll; +typedef enum CprmanPllChannel { + CPRMAN_PLLA_CHANNEL_DSI0 = 0, + CPRMAN_PLLA_CHANNEL_CORE, + CPRMAN_PLLA_CHANNEL_PER, + CPRMAN_PLLA_CHANNEL_CCP2, + + CPRMAN_PLLC_CHANNEL_CORE2, + CPRMAN_PLLC_CHANNEL_CORE1, + CPRMAN_PLLC_CHANNEL_PER, + CPRMAN_PLLC_CHANNEL_CORE0, + + CPRMAN_PLLD_CHANNEL_DSI0, + CPRMAN_PLLD_CHANNEL_CORE, + CPRMAN_PLLD_CHANNEL_PER, + CPRMAN_PLLD_CHANNEL_DSI1, + + CPRMAN_PLLH_CHANNEL_AUX, + CPRMAN_PLLH_CHANNEL_RCAL, + CPRMAN_PLLH_CHANNEL_PIX, + + CPRMAN_PLLB_CHANNEL_ARM, + + CPRMAN_NUM_PLL_CHANNEL, +} CprmanPllChannel; + typedef struct CprmanPllState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct CprmanPllState { Clock *out; } CprmanPllState; +typedef struct CprmanPllChannelState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanPllChannel id; + CprmanPll parent; + + uint32_t *reg_cm; + uint32_t hold_mask; + uint32_t load_mask; + uint32_t *reg_a2w_ctrl; + int fixed_divider; + + Clock *pll_in; + Clock *out; +} CprmanPllChannelState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { MemoryRegion iomem; CprmanPllState plls[CPRMAN_NUM_PLL]; + CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_cprman.h" #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" +#define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) +DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, + TYPE_CPRMAN_PLL_CHANNEL) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLD_FRAC, 0x1240) REG32(A2W_PLLH_FRAC, 0x1260) REG32(A2W_PLLB_FRAC, 0x12e0) +/* PLL channels */ +REG32(A2W_PLLA_DSI0, 0x1300) + FIELD(A2W_PLLx_CHANNELy, DIV, 0, 8) + FIELD(A2W_PLLx_CHANNELy, DISABLE, 8, 1) +REG32(A2W_PLLA_CORE, 0x1400) +REG32(A2W_PLLA_PER, 0x1500) +REG32(A2W_PLLA_CCP2, 0x1600) + +REG32(A2W_PLLC_CORE2, 0x1320) +REG32(A2W_PLLC_CORE1, 0x1420) +REG32(A2W_PLLC_PER, 0x1520) +REG32(A2W_PLLC_CORE0, 0x1620) + +REG32(A2W_PLLD_DSI0, 0x1340) +REG32(A2W_PLLD_CORE, 0x1440) +REG32(A2W_PLLD_PER, 0x1540) +REG32(A2W_PLLD_DSI1, 0x1640) + +REG32(A2W_PLLH_AUX, 0x1360) +REG32(A2W_PLLH_RCAL, 0x1460) +REG32(A2W_PLLH_PIX, 0x1560) +REG32(A2W_PLLH_STS, 0x1660) + +REG32(A2W_PLLB_ARM, 0x13e0) + /* misc registers */ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKH, 12, 1) @@ -XXX,XX +XXX,XX @@ static inline void set_pll_init_info(BCM2835CprmanState *s, pll->reg_a2w_frac = &s->regs[PLL_INIT_INFO[id].a2w_frac_offset]; } + +/* PLL channel init info */ +typedef struct PLLChannelInitInfo { + const char *name; + CprmanPll parent; + size_t cm_offset; + uint32_t cm_hold_mask; + uint32_t cm_load_mask; + size_t a2w_ctrl_offset; + unsigned int fixed_divider; +} PLLChannelInitInfo; + +#define FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_) \ + .parent = CPRMAN_ ## pll_, \ + .cm_offset = R_CM_ ## pll_, \ + .cm_load_mask = R_CM_ ## pll_ ## _ ## LOAD ## channel_ ## _MASK, \ + .a2w_ctrl_offset = R_A2W_ ## pll_ ## _ ## channel_ + +#define FILL_PLL_CHANNEL_INIT_INFO(pll_, channel_) \ + FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_), \ + .cm_hold_mask = R_CM_ ## pll_ ## _ ## HOLD ## channel_ ## _MASK, \ + .fixed_divider = 1 + +#define FILL_PLL_CHANNEL_INIT_INFO_nohold(pll_, channel_) \ + FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_), \ + .cm_hold_mask = 0 + +static PLLChannelInitInfo PLL_CHANNEL_INIT_INFO[] = { + [CPRMAN_PLLA_CHANNEL_DSI0] = { + .name = "plla-dsi0", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, DSI0), + }, + [CPRMAN_PLLA_CHANNEL_CORE] = { + .name = "plla-core", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, CORE), + }, + [CPRMAN_PLLA_CHANNEL_PER] = { + .name = "plla-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, PER), + }, + [CPRMAN_PLLA_CHANNEL_CCP2] = { + .name = "plla-ccp2", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, CCP2), + }, + + [CPRMAN_PLLC_CHANNEL_CORE2] = { + .name = "pllc-core2", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE2), + }, + [CPRMAN_PLLC_CHANNEL_CORE1] = { + .name = "pllc-core1", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE1), + }, + [CPRMAN_PLLC_CHANNEL_PER] = { + .name = "pllc-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, PER), + }, + [CPRMAN_PLLC_CHANNEL_CORE0] = { + .name = "pllc-core0", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE0), + }, + + [CPRMAN_PLLD_CHANNEL_DSI0] = { + .name = "plld-dsi0", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, DSI0), + }, + [CPRMAN_PLLD_CHANNEL_CORE] = { + .name = "plld-core", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, CORE), + }, + [CPRMAN_PLLD_CHANNEL_PER] = { + .name = "plld-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, PER), + }, + [CPRMAN_PLLD_CHANNEL_DSI1] = { + .name = "plld-dsi1", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, DSI1), + }, + + [CPRMAN_PLLH_CHANNEL_AUX] = { + .name = "pllh-aux", + .fixed_divider = 1, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, AUX), + }, + [CPRMAN_PLLH_CHANNEL_RCAL] = { + .name = "pllh-rcal", + .fixed_divider = 10, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, RCAL), + }, + [CPRMAN_PLLH_CHANNEL_PIX] = { + .name = "pllh-pix", + .fixed_divider = 10, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, PIX), + }, + + [CPRMAN_PLLB_CHANNEL_ARM] = { + .name = "pllb-arm", + FILL_PLL_CHANNEL_INIT_INFO(PLLB, ARM), + }, +}; + +#undef FILL_PLL_CHANNEL_INIT_INFO_nohold +#undef FILL_PLL_CHANNEL_INIT_INFO +#undef FILL_PLL_CHANNEL_INIT_INFO_common + +static inline void set_pll_channel_init_info(BCM2835CprmanState *s, + CprmanPllChannelState *channel, + CprmanPllChannel id) +{ + channel->id = id; + channel->parent = PLL_CHANNEL_INIT_INFO[id].parent; + channel->reg_cm = &s->regs[PLL_CHANNEL_INIT_INFO[id].cm_offset]; + channel->hold_mask = PLL_CHANNEL_INIT_INFO[id].cm_hold_mask; + channel->load_mask = PLL_CHANNEL_INIT_INFO[id].cm_load_mask; + channel->reg_a2w_ctrl = &s->regs[PLL_CHANNEL_INIT_INFO[id].a2w_ctrl_offset]; + channel->fixed_divider = PLL_CHANNEL_INIT_INFO[id].fixed_divider; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { }; +/* PLL channel */ + +static void pll_channel_update(CprmanPllChannelState *channel) +{ + clock_update(channel->out, 0); +} + +/* Update a PLL and all its channels */ +static void pll_update_all_channels(BCM2835CprmanState *s, + CprmanPllState *pll) +{ + size_t i; + + pll_update(pll); + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + CprmanPllChannelState *channel = &s->channels[i]; + if (channel->parent == pll->id) { + pll_channel_update(channel); + } + } +} + +static void pll_channel_pll_in_update(void *opaque) +{ + pll_channel_update(CPRMAN_PLL_CHANNEL(opaque)); +} + +static void pll_channel_init(Object *obj) +{ + CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(obj); + + s->pll_in = qdev_init_clock_in(DEVICE(s), "pll-in", + pll_channel_pll_in_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription pll_channel_vmstate = { + .name = TYPE_CPRMAN_PLL_CHANNEL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(pll_in, CprmanPllChannelState), + VMSTATE_END_OF_LIST() + } +}; + +static void pll_channel_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &pll_channel_vmstate; +} + +static const TypeInfo cprman_pll_channel_info = { + .name = TYPE_CPRMAN_PLL_CHANNEL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanPllChannelState), + .class_init = pll_channel_class_init, + .instance_init = pll_channel_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, return r; } -#define CASE_PLL_REGS(pll_) \ - case R_CM_ ## pll_: \ +static inline void update_pll_and_channels_from_cm(BCM2835CprmanState *s, + size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + if (PLL_INIT_INFO[i].cm_offset == idx) { + pll_update_all_channels(s, &s->plls[i]); + return; + } + } +} + +static inline void update_channel_from_a2w(BCM2835CprmanState *s, size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + if (PLL_CHANNEL_INIT_INFO[i].a2w_ctrl_offset == idx) { + pll_channel_update(&s->channels[i]); + return; + } + } +} + +#define CASE_PLL_A2W_REGS(pll_) \ case R_A2W_ ## pll_ ## _CTRL: \ case R_A2W_ ## pll_ ## _ANA0: \ case R_A2W_ ## pll_ ## _ANA1: \ @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, s->regs[idx] = value; switch (idx) { - CASE_PLL_REGS(PLLA) : + case R_CM_PLLA ... R_CM_PLLH: + case R_CM_PLLB: + /* + * A given CM_PLLx register is shared by both the PLL and the channels + * of this PLL. + */ + update_pll_and_channels_from_cm(s, idx); + break; + + CASE_PLL_A2W_REGS(PLLA) : pll_update(&s->plls[CPRMAN_PLLA]); break; - CASE_PLL_REGS(PLLC) : + CASE_PLL_A2W_REGS(PLLC) : pll_update(&s->plls[CPRMAN_PLLC]); break; - CASE_PLL_REGS(PLLD) : + CASE_PLL_A2W_REGS(PLLD) : pll_update(&s->plls[CPRMAN_PLLD]); break; - CASE_PLL_REGS(PLLH) : + CASE_PLL_A2W_REGS(PLLH) : pll_update(&s->plls[CPRMAN_PLLH]); break; - CASE_PLL_REGS(PLLB) : + CASE_PLL_A2W_REGS(PLLB) : pll_update(&s->plls[CPRMAN_PLLB]); break; + + case R_A2W_PLLA_DSI0: + case R_A2W_PLLA_CORE: + case R_A2W_PLLA_PER: + case R_A2W_PLLA_CCP2: + case R_A2W_PLLC_CORE2: + case R_A2W_PLLC_CORE1: + case R_A2W_PLLC_PER: + case R_A2W_PLLC_CORE0: + case R_A2W_PLLD_DSI0: + case R_A2W_PLLD_CORE: + case R_A2W_PLLD_PER: + case R_A2W_PLLD_DSI1: + case R_A2W_PLLH_AUX: + case R_A2W_PLLH_RCAL: + case R_A2W_PLLH_PIX: + case R_A2W_PLLB_ARM: + update_channel_from_a2w(s, idx); + break; } } -#undef CASE_PLL_REGS +#undef CASE_PLL_A2W_REGS static const MemoryRegionOps cprman_ops = { .read = cprman_read, @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->plls[i])); } + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + device_cold_reset(DEVICE(&s->channels[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_init_info(s, &s->plls[i], i); } + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + object_initialize_child(obj, PLL_CHANNEL_INIT_INFO[i].name, + &s->channels[i], + TYPE_CPRMAN_PLL_CHANNEL); + set_pll_channel_init_info(s, &s->channels[i], i); + } + s->xosc = clock_new(obj, "xosc"); memory_region_init_io(&s->iomem, obj, &cprman_ops, @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) return; } } + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + CprmanPllChannelState *channel = &s->channels[i]; + CprmanPll parent = PLL_CHANNEL_INIT_INFO[i].parent; + Clock *parent_clk = s->plls[parent].out; + + clock_set_source(channel->pll_in, parent_clk); + + if (!qdev_realize(DEVICE(channel), NULL, errp)) { + return; + } + } } static const VMStateDescription cprman_vmstate = { @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) { type_register_static(&cprman_info); type_register_static(&cprman_pll_info); + type_register_static(&cprman_pll_channel_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> A PLL channel is able to further divide the generated PLL frequency. The divider is given in the CTRL_A2W register. Some channels have an additional fixed divider which is always applied to the signal. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/bcm2835_cprman.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* PLL channel */ +static bool pll_channel_is_enabled(CprmanPllChannelState *channel) +{ + /* + * XXX I'm not sure of the purpose of the LOAD field. The Linux driver does + * not set it when enabling the channel, but does clear it when disabling + * it. + */ + return !FIELD_EX32(*channel->reg_a2w_ctrl, A2W_PLLx_CHANNELy, DISABLE) + && !(*channel->reg_cm & channel->hold_mask); +} + static void pll_channel_update(CprmanPllChannelState *channel) { - clock_update(channel->out, 0); + uint64_t freq, div; + + if (!pll_channel_is_enabled(channel)) { + clock_update(channel->out, 0); + return; + } + + div = FIELD_EX32(*channel->reg_a2w_ctrl, A2W_PLLx_CHANNELy, DIV); + + if (!div) { + /* + * It seems that when the divider value is 0, it is considered as + * being maximum by the hardware (see the Linux driver). + */ + div = R_A2W_PLLx_CHANNELy_DIV_MASK; + } + + /* Some channels have an additional fixed divider */ + freq = clock_get_hz(channel->pll_in) / (div * channel->fixed_divider); + + clock_update_hz(channel->out, freq); } /* Update a PLL and all its channels */ -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The clock multiplexers are the last clock stage in the CPRMAN. Each mux outputs one clock signal that goes out of the CPRMAN to the SoC peripherals. Each mux has at most 10 sources. The sources 0 to 3 are common to all muxes. They are: 0. ground (no clock signal) 1. the main oscillator (xosc) 2. "test debug 0" clock 3. "test debug 1" clock Test debug 0 and 1 are actual clock muxes that can be used as sources to other muxes (for debug purpose). Sources 4 to 9 are mux specific and can be unpopulated (grounded). Those sources are fed by the PLL channels outputs. One corner case exists for DSI0E and DSI0P muxes. They have their source number 4 connected to an intermediate multiplexer that can select between PLLA-DSI0 and PLLD-DSI0 channel. This multiplexer is called DSI0HSCK and is not a clock mux as such. It is really a simple mux from the hardware point of view (see https://elinux.org/The_Undocumented_Pi). This mux is not implemented in this commit. Note that there is some muxes for which sources are unknown (because of a lack of documentation). For those cases all the sources are connected to ground in this implementation. Each clock mux output is exported by the CPRMAN at the qdev level, adding the suffix '-out' to the mux name to form the output clock name. (E.g. the 'uart' mux sees its output exported as 'uart-out' at the CPRMAN level.) Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 85 +++++ include/hw/misc/bcm2835_cprman_internals.h | 422 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 151 ++++++++ 3 files changed, 658 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef enum CprmanPllChannel { CPRMAN_PLLB_CHANNEL_ARM, CPRMAN_NUM_PLL_CHANNEL, + + /* Special values used when connecting clock sources to clocks */ + CPRMAN_CLOCK_SRC_NORMAL = -1, + CPRMAN_CLOCK_SRC_FORCE_GROUND = -2, + CPRMAN_CLOCK_SRC_DSI0HSCK = -3, } CprmanPllChannel; +typedef enum CprmanClockMux { + CPRMAN_CLOCK_GNRIC, + CPRMAN_CLOCK_VPU, + CPRMAN_CLOCK_SYS, + CPRMAN_CLOCK_PERIA, + CPRMAN_CLOCK_PERII, + CPRMAN_CLOCK_H264, + CPRMAN_CLOCK_ISP, + CPRMAN_CLOCK_V3D, + CPRMAN_CLOCK_CAM0, + CPRMAN_CLOCK_CAM1, + CPRMAN_CLOCK_CCP2, + CPRMAN_CLOCK_DSI0E, + CPRMAN_CLOCK_DSI0P, + CPRMAN_CLOCK_DPI, + CPRMAN_CLOCK_GP0, + CPRMAN_CLOCK_GP1, + CPRMAN_CLOCK_GP2, + CPRMAN_CLOCK_HSM, + CPRMAN_CLOCK_OTP, + CPRMAN_CLOCK_PCM, + CPRMAN_CLOCK_PWM, + CPRMAN_CLOCK_SLIM, + CPRMAN_CLOCK_SMI, + CPRMAN_CLOCK_TEC, + CPRMAN_CLOCK_TD0, + CPRMAN_CLOCK_TD1, + CPRMAN_CLOCK_TSENS, + CPRMAN_CLOCK_TIMER, + CPRMAN_CLOCK_UART, + CPRMAN_CLOCK_VEC, + CPRMAN_CLOCK_PULSE, + CPRMAN_CLOCK_SDC, + CPRMAN_CLOCK_ARM, + CPRMAN_CLOCK_AVEO, + CPRMAN_CLOCK_EMMC, + CPRMAN_CLOCK_EMMC2, + + CPRMAN_NUM_CLOCK_MUX +} CprmanClockMux; + +typedef enum CprmanClockMuxSource { + CPRMAN_CLOCK_SRC_GND = 0, + CPRMAN_CLOCK_SRC_XOSC, + CPRMAN_CLOCK_SRC_TD0, + CPRMAN_CLOCK_SRC_TD1, + CPRMAN_CLOCK_SRC_PLLA, + CPRMAN_CLOCK_SRC_PLLC, + CPRMAN_CLOCK_SRC_PLLD, + CPRMAN_CLOCK_SRC_PLLH, + CPRMAN_CLOCK_SRC_PLLC_CORE1, + CPRMAN_CLOCK_SRC_PLLC_CORE2, + + CPRMAN_NUM_CLOCK_MUX_SRC +} CprmanClockMuxSource; + typedef struct CprmanPllState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct CprmanPllChannelState { Clock *out; } CprmanPllChannelState; +typedef struct CprmanClockMuxState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanClockMux id; + + uint32_t *reg_ctl; + uint32_t *reg_div; + int int_bits; + int frac_bits; + + Clock *srcs[CPRMAN_NUM_CLOCK_MUX_SRC]; + Clock *out; + + /* + * Used by clock srcs update callback to retrieve both the clock and the + * source number. + */ + struct CprmanClockMuxState *backref[CPRMAN_NUM_CLOCK_MUX_SRC]; +} CprmanClockMuxState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { CprmanPllState plls[CPRMAN_NUM_PLL]; CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; + CprmanClockMuxState clock_muxes[CPRMAN_NUM_CLOCK_MUX]; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; Clock *xosc; + Clock *gnd; }; #endif diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" #define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" +#define TYPE_CPRMAN_CLOCK_MUX "bcm2835-cprman-clock-mux" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, TYPE_CPRMAN_PLL_CHANNEL) +DECLARE_INSTANCE_CHECKER(CprmanClockMuxState, CPRMAN_CLOCK_MUX, + TYPE_CPRMAN_CLOCK_MUX) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLH_STS, 0x1660) REG32(A2W_PLLB_ARM, 0x13e0) +/* Clock muxes */ +REG32(CM_GNRICCTL, 0x000) + FIELD(CM_CLOCKx_CTL, SRC, 0, 4) + FIELD(CM_CLOCKx_CTL, ENABLE, 4, 1) + FIELD(CM_CLOCKx_CTL, KILL, 5, 1) + FIELD(CM_CLOCKx_CTL, GATE, 6, 1) + FIELD(CM_CLOCKx_CTL, BUSY, 7, 1) + FIELD(CM_CLOCKx_CTL, BUSYD, 8, 1) + FIELD(CM_CLOCKx_CTL, MASH, 9, 2) + FIELD(CM_CLOCKx_CTL, FLIP, 11, 1) +REG32(CM_GNRICDIV, 0x004) + FIELD(CM_CLOCKx_DIV, FRAC, 0, 12) +REG32(CM_VPUCTL, 0x008) +REG32(CM_VPUDIV, 0x00c) +REG32(CM_SYSCTL, 0x010) +REG32(CM_SYSDIV, 0x014) +REG32(CM_PERIACTL, 0x018) +REG32(CM_PERIADIV, 0x01c) +REG32(CM_PERIICTL, 0x020) +REG32(CM_PERIIDIV, 0x024) +REG32(CM_H264CTL, 0x028) +REG32(CM_H264DIV, 0x02c) +REG32(CM_ISPCTL, 0x030) +REG32(CM_ISPDIV, 0x034) +REG32(CM_V3DCTL, 0x038) +REG32(CM_V3DDIV, 0x03c) +REG32(CM_CAM0CTL, 0x040) +REG32(CM_CAM0DIV, 0x044) +REG32(CM_CAM1CTL, 0x048) +REG32(CM_CAM1DIV, 0x04c) +REG32(CM_CCP2CTL, 0x050) +REG32(CM_CCP2DIV, 0x054) +REG32(CM_DSI0ECTL, 0x058) +REG32(CM_DSI0EDIV, 0x05c) +REG32(CM_DSI0PCTL, 0x060) +REG32(CM_DSI0PDIV, 0x064) +REG32(CM_DPICTL, 0x068) +REG32(CM_DPIDIV, 0x06c) +REG32(CM_GP0CTL, 0x070) +REG32(CM_GP0DIV, 0x074) +REG32(CM_GP1CTL, 0x078) +REG32(CM_GP1DIV, 0x07c) +REG32(CM_GP2CTL, 0x080) +REG32(CM_GP2DIV, 0x084) +REG32(CM_HSMCTL, 0x088) +REG32(CM_HSMDIV, 0x08c) +REG32(CM_OTPCTL, 0x090) +REG32(CM_OTPDIV, 0x094) +REG32(CM_PCMCTL, 0x098) +REG32(CM_PCMDIV, 0x09c) +REG32(CM_PWMCTL, 0x0a0) +REG32(CM_PWMDIV, 0x0a4) +REG32(CM_SLIMCTL, 0x0a8) +REG32(CM_SLIMDIV, 0x0ac) +REG32(CM_SMICTL, 0x0b0) +REG32(CM_SMIDIV, 0x0b4) +REG32(CM_TCNTCTL, 0x0c0) +REG32(CM_TCNTCNT, 0x0c4) +REG32(CM_TECCTL, 0x0c8) +REG32(CM_TECDIV, 0x0cc) +REG32(CM_TD0CTL, 0x0d0) +REG32(CM_TD0DIV, 0x0d4) +REG32(CM_TD1CTL, 0x0d8) +REG32(CM_TD1DIV, 0x0dc) +REG32(CM_TSENSCTL, 0x0e0) +REG32(CM_TSENSDIV, 0x0e4) +REG32(CM_TIMERCTL, 0x0e8) +REG32(CM_TIMERDIV, 0x0ec) +REG32(CM_UARTCTL, 0x0f0) +REG32(CM_UARTDIV, 0x0f4) +REG32(CM_VECCTL, 0x0f8) +REG32(CM_VECDIV, 0x0fc) +REG32(CM_PULSECTL, 0x190) +REG32(CM_PULSEDIV, 0x194) +REG32(CM_SDCCTL, 0x1a8) +REG32(CM_SDCDIV, 0x1ac) +REG32(CM_ARMCTL, 0x1b0) +REG32(CM_AVEOCTL, 0x1b8) +REG32(CM_AVEODIV, 0x1bc) +REG32(CM_EMMCCTL, 0x1c0) +REG32(CM_EMMCDIV, 0x1c4) +REG32(CM_EMMC2CTL, 0x1d0) +REG32(CM_EMMC2DIV, 0x1d4) + /* misc registers */ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKH, 12, 1) @@ -XXX,XX +XXX,XX @@ static inline void set_pll_channel_init_info(BCM2835CprmanState *s, channel->fixed_divider = PLL_CHANNEL_INIT_INFO[id].fixed_divider; } +/* Clock mux init info */ +typedef struct ClockMuxInitInfo { + const char *name; + size_t cm_offset; /* cm_offset[0]->CM_CTL, cm_offset[1]->CM_DIV */ + int int_bits; + int frac_bits; + + CprmanPllChannel src_mapping[CPRMAN_NUM_CLOCK_MUX_SRC]; +} ClockMuxInitInfo; + +/* + * Each clock mux can have up to 10 sources. Sources 0 to 3 are always the + * same (ground, xosc, td0, td1). Sources 4 to 9 are mux specific, and are not + * always populated. The following macros catch all those cases. + */ + +/* Unknown mapping. Connect everything to ground */ +#define SRC_MAPPING_INFO_unknown \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* gnd */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* xosc */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* test debug 0 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* test debug 1 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll a */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll d */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll h */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c, core1 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c, core2 */ \ + } + +/* Only the oscillator and the two test debug clocks */ +#define SRC_MAPPING_INFO_xosc \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* All the PLL "core" channels */ +#define SRC_MAPPING_INFO_core \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLA_CHANNEL_CORE, \ + CPRMAN_PLLC_CHANNEL_CORE0, \ + CPRMAN_PLLD_CHANNEL_CORE, \ + CPRMAN_PLLH_CHANNEL_AUX, \ + CPRMAN_PLLC_CHANNEL_CORE1, \ + CPRMAN_PLLC_CHANNEL_CORE2, \ + } + +/* All the PLL "per" channels */ +#define SRC_MAPPING_INFO_periph \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLA_CHANNEL_PER, \ + CPRMAN_PLLC_CHANNEL_PER, \ + CPRMAN_PLLD_CHANNEL_PER, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* + * The DSI0 channels. This one got an intermediate mux between the PLL channels + * and the clock input. + */ +#define SRC_MAPPING_INFO_dsi0 \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_DSI0HSCK, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* The DSI1 channel */ +#define SRC_MAPPING_INFO_dsi1 \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLD_CHANNEL_DSI1, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +#define FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO(kind_) \ + SRC_MAPPING_INFO_ ## kind_ + +#define FILL_CLOCK_MUX_INIT_INFO(clock_, kind_) \ + .cm_offset = R_CM_ ## clock_ ## CTL, \ + FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO(kind_) + +static ClockMuxInitInfo CLOCK_MUX_INIT_INFO[] = { + [CPRMAN_CLOCK_GNRIC] = { + .name = "gnric", + FILL_CLOCK_MUX_INIT_INFO(GNRIC, unknown), + }, + [CPRMAN_CLOCK_VPU] = { + .name = "vpu", + .int_bits = 12, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(VPU, core), + }, + [CPRMAN_CLOCK_SYS] = { + .name = "sys", + FILL_CLOCK_MUX_INIT_INFO(SYS, unknown), + }, + [CPRMAN_CLOCK_PERIA] = { + .name = "peria", + FILL_CLOCK_MUX_INIT_INFO(PERIA, unknown), + }, + [CPRMAN_CLOCK_PERII] = { + .name = "perii", + FILL_CLOCK_MUX_INIT_INFO(PERII, unknown), + }, + [CPRMAN_CLOCK_H264] = { + .name = "h264", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(H264, core), + }, + [CPRMAN_CLOCK_ISP] = { + .name = "isp", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(ISP, core), + }, + [CPRMAN_CLOCK_V3D] = { + .name = "v3d", + FILL_CLOCK_MUX_INIT_INFO(V3D, core), + }, + [CPRMAN_CLOCK_CAM0] = { + .name = "cam0", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(CAM0, periph), + }, + [CPRMAN_CLOCK_CAM1] = { + .name = "cam1", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(CAM1, periph), + }, + [CPRMAN_CLOCK_CCP2] = { + .name = "ccp2", + FILL_CLOCK_MUX_INIT_INFO(CCP2, unknown), + }, + [CPRMAN_CLOCK_DSI0E] = { + .name = "dsi0e", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(DSI0E, dsi0), + }, + [CPRMAN_CLOCK_DSI0P] = { + .name = "dsi0p", + .int_bits = 0, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(DSI0P, dsi0), + }, + [CPRMAN_CLOCK_DPI] = { + .name = "dpi", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(DPI, periph), + }, + [CPRMAN_CLOCK_GP0] = { + .name = "gp0", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP0, periph), + }, + [CPRMAN_CLOCK_GP1] = { + .name = "gp1", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP1, periph), + }, + [CPRMAN_CLOCK_GP2] = { + .name = "gp2", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP2, periph), + }, + [CPRMAN_CLOCK_HSM] = { + .name = "hsm", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(HSM, periph), + }, + [CPRMAN_CLOCK_OTP] = { + .name = "otp", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(OTP, xosc), + }, + [CPRMAN_CLOCK_PCM] = { + .name = "pcm", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(PCM, periph), + }, + [CPRMAN_CLOCK_PWM] = { + .name = "pwm", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(PWM, periph), + }, + [CPRMAN_CLOCK_SLIM] = { + .name = "slim", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(SLIM, periph), + }, + [CPRMAN_CLOCK_SMI] = { + .name = "smi", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(SMI, periph), + }, + [CPRMAN_CLOCK_TEC] = { + .name = "tec", + .int_bits = 6, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(TEC, xosc), + }, + [CPRMAN_CLOCK_TD0] = { + .name = "td0", + FILL_CLOCK_MUX_INIT_INFO(TD0, unknown), + }, + [CPRMAN_CLOCK_TD1] = { + .name = "td1", + FILL_CLOCK_MUX_INIT_INFO(TD1, unknown), + }, + [CPRMAN_CLOCK_TSENS] = { + .name = "tsens", + .int_bits = 5, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(TSENS, xosc), + }, + [CPRMAN_CLOCK_TIMER] = { + .name = "timer", + .int_bits = 6, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(TIMER, xosc), + }, + [CPRMAN_CLOCK_UART] = { + .name = "uart", + .int_bits = 10, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(UART, periph), + }, + [CPRMAN_CLOCK_VEC] = { + .name = "vec", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(VEC, periph), + }, + [CPRMAN_CLOCK_PULSE] = { + .name = "pulse", + FILL_CLOCK_MUX_INIT_INFO(PULSE, xosc), + }, + [CPRMAN_CLOCK_SDC] = { + .name = "sdram", + .int_bits = 6, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(SDC, core), + }, + [CPRMAN_CLOCK_ARM] = { + .name = "arm", + FILL_CLOCK_MUX_INIT_INFO(ARM, unknown), + }, + [CPRMAN_CLOCK_AVEO] = { + .name = "aveo", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(AVEO, periph), + }, + [CPRMAN_CLOCK_EMMC] = { + .name = "emmc", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(EMMC, periph), + }, + [CPRMAN_CLOCK_EMMC2] = { + .name = "emmc2", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(EMMC2, unknown), + }, +}; + +#undef FILL_CLOCK_MUX_INIT_INFO +#undef FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO +#undef SRC_MAPPING_INFO_dsi1 +#undef SRC_MAPPING_INFO_dsi0 +#undef SRC_MAPPING_INFO_periph +#undef SRC_MAPPING_INFO_core +#undef SRC_MAPPING_INFO_xosc +#undef SRC_MAPPING_INFO_unknown + +static inline void set_clock_mux_init_info(BCM2835CprmanState *s, + CprmanClockMuxState *mux, + CprmanClockMux id) +{ + mux->id = id; + mux->reg_ctl = &s->regs[CLOCK_MUX_INIT_INFO[id].cm_offset]; + mux->reg_div = &s->regs[CLOCK_MUX_INIT_INFO[id].cm_offset + 1]; + mux->int_bits = CLOCK_MUX_INIT_INFO[id].int_bits; + mux->frac_bits = CLOCK_MUX_INIT_INFO[id].frac_bits; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ * * The page at https://elinux.org/The_Undocumented_Pi gives the actual clock * tree configuration. + * + * The CPRMAN exposes clock outputs with the name of the clock mux suffixed + * with "-out" (e.g. "uart-out", "h264-out", ...). */ #include "qemu/osdep.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_channel_info = { }; +/* clock mux */ + +static void clock_mux_update(CprmanClockMuxState *mux) +{ + clock_update(mux->out, 0); +} + +static void clock_mux_src_update(void *opaque) +{ + CprmanClockMuxState **backref = opaque; + CprmanClockMuxState *s = *backref; + + clock_mux_update(s); +} + +static void clock_mux_init(Object *obj) +{ + CprmanClockMuxState *s = CPRMAN_CLOCK_MUX(obj); + size_t i; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX_SRC; i++) { + char *name = g_strdup_printf("srcs[%zu]", i); + s->backref[i] = s; + s->srcs[i] = qdev_init_clock_in(DEVICE(s), name, + clock_mux_src_update, + &s->backref[i]); + g_free(name); + } + + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription clock_mux_vmstate = { + .name = TYPE_CPRMAN_CLOCK_MUX, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_ARRAY_CLOCK(srcs, CprmanClockMuxState, + CPRMAN_NUM_CLOCK_MUX_SRC), + VMSTATE_END_OF_LIST() + } +}; + +static void clock_mux_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &clock_mux_vmstate; +} + +static const TypeInfo cprman_clock_mux_info = { + .name = TYPE_CPRMAN_CLOCK_MUX, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanClockMuxState), + .class_init = clock_mux_class_init, + .instance_init = clock_mux_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static inline void update_channel_from_a2w(BCM2835CprmanState *s, size_t idx) } } +static inline void update_mux_from_cm(BCM2835CprmanState *s, size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + if ((CLOCK_MUX_INIT_INFO[i].cm_offset == idx) || + (CLOCK_MUX_INIT_INFO[i].cm_offset + 4 == idx)) { + /* matches CM_CTL or CM_DIV mux register */ + clock_mux_update(&s->clock_muxes[i]); + return; + } + } +} + #define CASE_PLL_A2W_REGS(pll_) \ case R_A2W_ ## pll_ ## _CTRL: \ case R_A2W_ ## pll_ ## _ANA0: \ @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, case R_A2W_PLLB_ARM: update_channel_from_a2w(s, idx); break; + + case R_CM_GNRICCTL ... R_CM_SMIDIV: + case R_CM_TCNTCNT ... R_CM_VECDIV: + case R_CM_PULSECTL ... R_CM_PULSEDIV: + case R_CM_SDCCTL ... R_CM_ARMCTL: + case R_CM_AVEOCTL ... R_CM_EMMCDIV: + case R_CM_EMMC2CTL ... R_CM_EMMC2DIV: + update_mux_from_cm(s, idx); + break; } } @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->channels[i])); } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + device_cold_reset(DEVICE(&s->clock_muxes[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_channel_init_info(s, &s->channels[i], i); } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + char *alias; + + object_initialize_child(obj, CLOCK_MUX_INIT_INFO[i].name, + &s->clock_muxes[i], + TYPE_CPRMAN_CLOCK_MUX); + set_clock_mux_init_info(s, &s->clock_muxes[i], i); + + /* Expose muxes output as CPRMAN outputs */ + alias = g_strdup_printf("%s-out", CLOCK_MUX_INIT_INFO[i].name); + qdev_alias_clock(DEVICE(&s->clock_muxes[i]), "out", DEVICE(obj), alias); + g_free(alias); + } + s->xosc = clock_new(obj, "xosc"); + s->gnd = clock_new(obj, "gnd"); + + clock_set(s->gnd, 0); memory_region_init_io(&s->iomem, obj, &cprman_ops, s, "bcm2835-cprman", 0x2000); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void connect_mux_sources(BCM2835CprmanState *s, + CprmanClockMuxState *mux, + const CprmanPllChannel *clk_mapping) +{ + size_t i; + Clock *td0 = s->clock_muxes[CPRMAN_CLOCK_TD0].out; + Clock *td1 = s->clock_muxes[CPRMAN_CLOCK_TD1].out; + + /* For sources from 0 to 3. Source 4 to 9 are mux specific */ + Clock * const CLK_SRC_MAPPING[] = { + [CPRMAN_CLOCK_SRC_GND] = s->gnd, + [CPRMAN_CLOCK_SRC_XOSC] = s->xosc, + [CPRMAN_CLOCK_SRC_TD0] = td0, + [CPRMAN_CLOCK_SRC_TD1] = td1, + }; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX_SRC; i++) { + CprmanPllChannel mapping = clk_mapping[i]; + Clock *src; + + if (mapping == CPRMAN_CLOCK_SRC_FORCE_GROUND) { + src = s->gnd; + } else if (mapping == CPRMAN_CLOCK_SRC_DSI0HSCK) { + src = s->gnd; /* TODO */ + } else if (i < CPRMAN_CLOCK_SRC_PLLA) { + src = CLK_SRC_MAPPING[i]; + } else { + src = s->channels[mapping].out; + } + + clock_set_source(mux->srcs[i], src); + } +} + static void cprman_realize(DeviceState *dev, Error **errp) { BCM2835CprmanState *s = CPRMAN(dev); @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) return; } } + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + CprmanClockMuxState *clock_mux = &s->clock_muxes[i]; + + connect_mux_sources(s, clock_mux, CLOCK_MUX_INIT_INFO[i].src_mapping); + + if (!qdev_realize(DEVICE(clock_mux), NULL, errp)) { + return; + } + } } static const VMStateDescription cprman_vmstate = { @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) type_register_static(&cprman_info); type_register_static(&cprman_pll_info); type_register_static(&cprman_pll_channel_info); + type_register_static(&cprman_clock_mux_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> A clock mux can be configured to select one of its 10 sources through the CM_CTL register. It also embeds yet another clock divider, composed of an integer part and a fractional part. The number of bits of each part is mux dependent. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/bcm2835_cprman.c | 53 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-) diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_channel_info = { /* clock mux */ +static bool clock_mux_is_enabled(CprmanClockMuxState *mux) +{ + return FIELD_EX32(*mux->reg_ctl, CM_CLOCKx_CTL, ENABLE); +} + static void clock_mux_update(CprmanClockMuxState *mux) { - clock_update(mux->out, 0); + uint64_t freq; + uint32_t div, src = FIELD_EX32(*mux->reg_ctl, CM_CLOCKx_CTL, SRC); + bool enabled = clock_mux_is_enabled(mux); + + *mux->reg_ctl = FIELD_DP32(*mux->reg_ctl, CM_CLOCKx_CTL, BUSY, enabled); + + if (!enabled) { + clock_update(mux->out, 0); + return; + } + + freq = clock_get_hz(mux->srcs[src]); + + if (mux->int_bits == 0 && mux->frac_bits == 0) { + clock_update_hz(mux->out, freq); + return; + } + + /* + * The divider has an integer and a fractional part. The size of each part + * varies with the muxes (int_bits and frac_bits). Both parts are + * concatenated, with the integer part always starting at bit 12. + * + * 31 12 11 0 + * ------------------------------ + * CM_DIV | | int | frac | | + * ------------------------------ + * <-----> <------> + * int_bits frac_bits + */ + div = extract32(*mux->reg_div, + R_CM_CLOCKx_DIV_FRAC_LENGTH - mux->frac_bits, + mux->int_bits + mux->frac_bits); + + if (!div) { + clock_update(mux->out, 0); + return; + } + + freq = muldiv64(freq, 1 << mux->frac_bits, div); + + clock_update_hz(mux->out, freq); } static void clock_mux_src_update(void *opaque) { CprmanClockMuxState **backref = opaque; CprmanClockMuxState *s = *backref; + CprmanClockMuxSource src = backref - s->backref; + + if (FIELD_EX32(*s->reg_ctl, CM_CLOCKx_CTL, SRC) != src) { + return; + } clock_mux_update(s); } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> This simple mux sits between the PLL channels and the DSI0E and DSI0P clock muxes. This mux selects between PLLA-DSI0 and PLLD-DSI0 channel and outputs the selected signal to source number 4 of DSI0E/P clock muxes. It is controlled by the cm_dsi0hsck register. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 15 +++++ include/hw/misc/bcm2835_cprman_internals.h | 6 ++ hw/misc/bcm2835_cprman.c | 74 +++++++++++++++++++++- 3 files changed, 94 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef struct CprmanClockMuxState { struct CprmanClockMuxState *backref[CPRMAN_NUM_CLOCK_MUX_SRC]; } CprmanClockMuxState; +typedef struct CprmanDsi0HsckMuxState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanClockMux id; + + uint32_t *reg_cm; + + Clock *plla_in; + Clock *plld_in; + Clock *out; +} CprmanDsi0HsckMuxState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { CprmanPllState plls[CPRMAN_NUM_PLL]; CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; CprmanClockMuxState clock_muxes[CPRMAN_NUM_CLOCK_MUX]; + CprmanDsi0HsckMuxState dsi0hsck_mux; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" #define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" #define TYPE_CPRMAN_CLOCK_MUX "bcm2835-cprman-clock-mux" +#define TYPE_CPRMAN_DSI0HSCK_MUX "bcm2835-cprman-dsi0hsck-mux" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, TYPE_CPRMAN_PLL_CHANNEL) DECLARE_INSTANCE_CHECKER(CprmanClockMuxState, CPRMAN_CLOCK_MUX, TYPE_CPRMAN_CLOCK_MUX) +DECLARE_INSTANCE_CHECKER(CprmanDsi0HsckMuxState, CPRMAN_DSI0HSCK_MUX, + TYPE_CPRMAN_DSI0HSCK_MUX) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKB, 9, 1) FIELD(CM_LOCK, FLOCKA, 8, 1) +REG32(CM_DSI0HSCK, 0x120) + FIELD(CM_DSI0HSCK, SELPLLD, 0, 1) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_clock_mux_info = { }; +/* DSI0HSCK mux */ + +static void dsi0hsck_mux_update(CprmanDsi0HsckMuxState *s) +{ + bool src_is_plld = FIELD_EX32(*s->reg_cm, CM_DSI0HSCK, SELPLLD); + Clock *src = src_is_plld ? s->plld_in : s->plla_in; + + clock_update(s->out, clock_get(src)); +} + +static void dsi0hsck_mux_in_update(void *opaque) +{ + dsi0hsck_mux_update(CPRMAN_DSI0HSCK_MUX(opaque)); +} + +static void dsi0hsck_mux_init(Object *obj) +{ + CprmanDsi0HsckMuxState *s = CPRMAN_DSI0HSCK_MUX(obj); + DeviceState *dev = DEVICE(obj); + + s->plla_in = qdev_init_clock_in(dev, "plla-in", dsi0hsck_mux_in_update, s); + s->plld_in = qdev_init_clock_in(dev, "plld-in", dsi0hsck_mux_in_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription dsi0hsck_mux_vmstate = { + .name = TYPE_CPRMAN_DSI0HSCK_MUX, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(plla_in, CprmanDsi0HsckMuxState), + VMSTATE_CLOCK(plld_in, CprmanDsi0HsckMuxState), + VMSTATE_END_OF_LIST() + } +}; + +static void dsi0hsck_mux_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &dsi0hsck_mux_vmstate; +} + +static const TypeInfo cprman_dsi0hsck_mux_info = { + .name = TYPE_CPRMAN_DSI0HSCK_MUX, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanDsi0HsckMuxState), + .class_init = dsi0hsck_mux_class_init, + .instance_init = dsi0hsck_mux_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, case R_CM_EMMC2CTL ... R_CM_EMMC2DIV: update_mux_from_cm(s, idx); break; + + case R_CM_DSI0HSCK: + dsi0hsck_mux_update(&s->dsi0hsck_mux); + break; } } @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->channels[i])); } + device_cold_reset(DEVICE(&s->dsi0hsck_mux)); + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { device_cold_reset(DEVICE(&s->clock_muxes[i])); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_channel_init_info(s, &s->channels[i], i); } + object_initialize_child(obj, "dsi0hsck-mux", + &s->dsi0hsck_mux, TYPE_CPRMAN_DSI0HSCK_MUX); + s->dsi0hsck_mux.reg_cm = &s->regs[R_CM_DSI0HSCK]; + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { char *alias; @@ -XXX,XX +XXX,XX @@ static void connect_mux_sources(BCM2835CprmanState *s, if (mapping == CPRMAN_CLOCK_SRC_FORCE_GROUND) { src = s->gnd; } else if (mapping == CPRMAN_CLOCK_SRC_DSI0HSCK) { - src = s->gnd; /* TODO */ + src = s->dsi0hsck_mux.out; } else if (i < CPRMAN_CLOCK_SRC_PLLA) { src = CLK_SRC_MAPPING[i]; } else { @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) } } + clock_set_source(s->dsi0hsck_mux.plla_in, + s->channels[CPRMAN_PLLA_CHANNEL_DSI0].out); + clock_set_source(s->dsi0hsck_mux.plld_in, + s->channels[CPRMAN_PLLD_CHANNEL_DSI0].out); + + if (!qdev_realize(DEVICE(&s->dsi0hsck_mux), NULL, errp)) { + return; + } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { CprmanClockMuxState *clock_mux = &s->clock_muxes[i]; @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) type_register_static(&cprman_pll_info); type_register_static(&cprman_pll_channel_info); type_register_static(&cprman_clock_mux_info); + type_register_static(&cprman_dsi0hsck_mux_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Those reset values have been extracted from a Raspberry Pi 3 model B v1.2, using the 2020-08-20 version of raspios. The dump was done using the debugfs interface of the CPRMAN driver in Linux (under '/sys/kernel/debug/clk'). Each exposed clock tree stage (PLLs, channels and muxes) can be observed by reading the 'regdump' file (e.g. 'plla/regdump'). Those values are set by the Raspberry Pi firmware at boot time (Linux expects them to be set when it boots up). Some stages are not exposed by the Linux driver (e.g. the PLL B). For those, the reset values are unknown and left to 0 which implies a disabled output. Once booted in QEMU, the final clock tree is very similar to the one visible on real hardware. The differences come from some unimplemented devices for which the driver simply disable the corresponding clock. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman_internals.h | 269 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 31 +++ 2 files changed, 300 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ static inline void set_clock_mux_init_info(BCM2835CprmanState *s, mux->frac_bits = CLOCK_MUX_INIT_INFO[id].frac_bits; } + +/* + * Object reset info + * Those values have been dumped from a Raspberry Pi 3 Model B v1.2 using the + * clk debugfs interface in Linux. + */ +typedef struct PLLResetInfo { + uint32_t cm; + uint32_t a2w_ctrl; + uint32_t a2w_ana[4]; + uint32_t a2w_frac; +} PLLResetInfo; + +static const PLLResetInfo PLL_RESET_INFO[] = { + [CPRMAN_PLLA] = { + .cm = 0x0000008a, + .a2w_ctrl = 0x0002103a, + .a2w_frac = 0x00098000, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLC] = { + .cm = 0x00000228, + .a2w_ctrl = 0x0002103e, + .a2w_frac = 0x00080000, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLD] = { + .cm = 0x0000020a, + .a2w_ctrl = 0x00021034, + .a2w_frac = 0x00015556, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLH] = { + .cm = 0x00000000, + .a2w_ctrl = 0x0002102d, + .a2w_frac = 0x00000000, + .a2w_ana = { 0x00900000, 0x0000000c, 0x00000000, 0x00000000 } + }, + + [CPRMAN_PLLB] = { + /* unknown */ + .cm = 0x00000000, + .a2w_ctrl = 0x00000000, + .a2w_frac = 0x00000000, + .a2w_ana = { 0x00000000, 0x00000000, 0x00000000, 0x00000000 } + } +}; + +typedef struct PLLChannelResetInfo { + /* + * Even though a PLL channel has a CM register, it shares it with its + * parent PLL. The parent already takes care of the reset value. + */ + uint32_t a2w_ctrl; +} PLLChannelResetInfo; + +static const PLLChannelResetInfo PLL_CHANNEL_RESET_INFO[] = { + [CPRMAN_PLLA_CHANNEL_DSI0] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLA_CHANNEL_CORE] = { .a2w_ctrl = 0x00000003 }, + [CPRMAN_PLLA_CHANNEL_PER] = { .a2w_ctrl = 0x00000000 }, /* unknown */ + [CPRMAN_PLLA_CHANNEL_CCP2] = { .a2w_ctrl = 0x00000100 }, + + [CPRMAN_PLLC_CHANNEL_CORE2] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLC_CHANNEL_CORE1] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLC_CHANNEL_PER] = { .a2w_ctrl = 0x00000002 }, + [CPRMAN_PLLC_CHANNEL_CORE0] = { .a2w_ctrl = 0x00000002 }, + + [CPRMAN_PLLD_CHANNEL_DSI0] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLD_CHANNEL_CORE] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLD_CHANNEL_PER] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLD_CHANNEL_DSI1] = { .a2w_ctrl = 0x00000100 }, + + [CPRMAN_PLLH_CHANNEL_AUX] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLH_CHANNEL_RCAL] = { .a2w_ctrl = 0x00000000 }, + [CPRMAN_PLLH_CHANNEL_PIX] = { .a2w_ctrl = 0x00000000 }, + + [CPRMAN_PLLB_CHANNEL_ARM] = { .a2w_ctrl = 0x00000000 }, /* unknown */ +}; + +typedef struct ClockMuxResetInfo { + uint32_t cm_ctl; + uint32_t cm_div; +} ClockMuxResetInfo; + +static const ClockMuxResetInfo CLOCK_MUX_RESET_INFO[] = { + [CPRMAN_CLOCK_GNRIC] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_VPU] = { + .cm_ctl = 0x00000245, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_SYS] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_PERIA] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_PERII] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_H264] = { + .cm_ctl = 0x00000244, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_ISP] = { + .cm_ctl = 0x00000244, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_V3D] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_CAM0] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_CAM1] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_CCP2] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_DSI0E] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_DSI0P] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_DPI] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_GP0] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_GP1] = { + .cm_ctl = 0x00000096, + .cm_div = 0x00014000, + }, + + [CPRMAN_CLOCK_GP2] = { + .cm_ctl = 0x00000291, + .cm_div = 0x00249f00, + }, + + [CPRMAN_CLOCK_HSM] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_OTP] = { + .cm_ctl = 0x00000091, + .cm_div = 0x00004000, + }, + + [CPRMAN_CLOCK_PCM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_PWM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_SLIM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_SMI] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_TEC] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_TD0] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_TD1] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_TSENS] = { + .cm_ctl = 0x00000091, + .cm_div = 0x0000a000, + }, + + [CPRMAN_CLOCK_TIMER] = { + .cm_ctl = 0x00000291, + .cm_div = 0x00013333, + }, + + [CPRMAN_CLOCK_UART] = { + .cm_ctl = 0x00000296, + .cm_div = 0x0000a6ab, + }, + + [CPRMAN_CLOCK_VEC] = { + .cm_ctl = 0x00000097, + .cm_div = 0x00002000, + }, + + [CPRMAN_CLOCK_PULSE] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_SDC] = { + .cm_ctl = 0x00004006, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_ARM] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_AVEO] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_EMMC] = { + .cm_ctl = 0x00000295, + .cm_div = 0x00006000, + }, + + [CPRMAN_CLOCK_EMMC2] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, +}; + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ /* PLL */ +static void pll_reset(DeviceState *dev) +{ + CprmanPllState *s = CPRMAN_PLL(dev); + const PLLResetInfo *info = &PLL_RESET_INFO[s->id]; + + *s->reg_cm = info->cm; + *s->reg_a2w_ctrl = info->a2w_ctrl; + memcpy(s->reg_a2w_ana, info->a2w_ana, sizeof(info->a2w_ana)); + *s->reg_a2w_frac = info->a2w_frac; +} + static bool pll_is_locked(const CprmanPllState *pll) { return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN) @@ -XXX,XX +XXX,XX @@ static void pll_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = pll_reset; dc->vmsd = &pll_vmstate; } @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* PLL channel */ +static void pll_channel_reset(DeviceState *dev) +{ + CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(dev); + const PLLChannelResetInfo *info = &PLL_CHANNEL_RESET_INFO[s->id]; + + *s->reg_a2w_ctrl = info->a2w_ctrl; +} + static bool pll_channel_is_enabled(CprmanPllChannelState *channel) { /* @@ -XXX,XX +XXX,XX @@ static void pll_channel_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = pll_channel_reset; dc->vmsd = &pll_channel_vmstate; } @@ -XXX,XX +XXX,XX @@ static void clock_mux_src_update(void *opaque) clock_mux_update(s); } +static void clock_mux_reset(DeviceState *dev) +{ + CprmanClockMuxState *clock = CPRMAN_CLOCK_MUX(dev); + const ClockMuxResetInfo *info = &CLOCK_MUX_RESET_INFO[clock->id]; + + *clock->reg_ctl = info->cm_ctl; + *clock->reg_div = info->cm_div; +} + static void clock_mux_init(Object *obj) { CprmanClockMuxState *s = CPRMAN_CLOCK_MUX(obj); @@ -XXX,XX +XXX,XX @@ static void clock_mux_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = clock_mux_reset; dc->vmsd = &clock_mux_vmstate; } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Add a clock input to the PL011 UART so we can compute the current baud rate and trace it. This is intended for developers who wish to use QEMU to e.g. debug their firmware or to figure out the baud rate configured by an unknown/closed source binary. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/pl011.h | 1 + hw/char/pl011.c | 45 +++++++++++++++++++++++++++++++++++++++++ hw/char/trace-events | 1 + 3 files changed, 47 insertions(+) diff --git a/include/hw/char/pl011.h b/include/hw/char/pl011.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/pl011.h +++ b/include/hw/char/pl011.h @@ -XXX,XX +XXX,XX @@ struct PL011State { int read_trigger; CharBackend chr; qemu_irq irq[6]; + Clock *clk; const unsigned char *id; }; diff --git a/hw/char/pl011.c b/hw/char/pl011.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/pl011.c +++ b/hw/char/pl011.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/pl011.h" #include "hw/irq.h" #include "hw/sysbus.h" +#include "hw/qdev-clock.h" #include "migration/vmstate.h" #include "chardev/char-fe.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ static void pl011_set_read_trigger(PL011State *s) s->read_trigger = 1; } +static unsigned int pl011_get_baudrate(const PL011State *s) +{ + uint64_t clk; + + if (s->fbrd == 0) { + return 0; + } + + clk = clock_get_hz(s->clk); + return (clk / ((s->ibrd << 6) + s->fbrd)) << 2; +} + +static void pl011_trace_baudrate_change(const PL011State *s) +{ + trace_pl011_baudrate_change(pl011_get_baudrate(s), + clock_get_hz(s->clk), + s->ibrd, s->fbrd); +} + static void pl011_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void pl011_write(void *opaque, hwaddr offset, break; case 9: /* UARTIBRD */ s->ibrd = value; + pl011_trace_baudrate_change(s); break; case 10: /* UARTFBRD */ s->fbrd = value; + pl011_trace_baudrate_change(s); break; case 11: /* UARTLCR_H */ /* Reset the FIFO state on FIFO enable or disable */ @@ -XXX,XX +XXX,XX @@ static void pl011_event(void *opaque, QEMUChrEvent event) pl011_put_fifo(opaque, 0x400); } +static void pl011_clock_update(void *opaque) +{ + PL011State *s = PL011(opaque); + + pl011_trace_baudrate_change(s); +} + static const MemoryRegionOps pl011_ops = { .read = pl011_read, .write = pl011_write, .endianness = DEVICE_NATIVE_ENDIAN, }; +static const VMStateDescription vmstate_pl011_clock = { + .name = "pl011/clock", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(clk, PL011State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_pl011 = { .name = "pl011", .version_id = 2, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pl011 = { VMSTATE_INT32(read_count, PL011State), VMSTATE_INT32(read_trigger, PL011State), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_pl011_clock, + NULL } }; @@ -XXX,XX +XXX,XX @@ static void pl011_init(Object *obj) sysbus_init_irq(sbd, &s->irq[i]); } + s->clk = qdev_init_clock_in(DEVICE(obj), "clk", pl011_clock_update, s); + s->read_trigger = 1; s->ifl = 0x12; s->cr = 0x300; diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ pl011_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR 0x%08x read_count %d returning %d" pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d" pl011_put_fifo_full(void) "FIFO now full, RXFF set" +pl011_baudrate_change(unsigned int baudrate, uint64_t clock, uint32_t ibrd, uint32_t fbrd) "new baudrate %u (clk: %" PRIu64 "hz, ibrd: %" PRIu32 ", fbrd: %" PRIu32 ")" # cmsdk-apb-uart.c cmsdk_apb_uart_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Connect the 'uart-out' clock from the CPRMAN to the PL011 instance. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2835_peripherals.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) } memory_region_add_subregion(&s->peri_mr, CPRMAN_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cprman), 0)); + qdev_connect_clock_in(DEVICE(&s->uart0), "clk", + qdev_get_clock_out(DEVICE(&s->cprman), "uart-out")); memory_region_add_subregion(&s->peri_mr, ARMCTRL_IC_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ic), 0)); -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Generic watchdog device model implementation as per ARM SBSA v6.0 Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Message-id: 20201027015927.29495-2-shashi.mallela@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/sbsa_gwdt.h | 79 +++++++++ hw/watchdog/sbsa_gwdt.c | 293 ++++++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/watchdog/Kconfig | 3 + hw/watchdog/meson.build | 1 + 5 files changed, 377 insertions(+) create mode 100644 include/hw/watchdog/sbsa_gwdt.h create mode 100644 hw/watchdog/sbsa_gwdt.c diff --git a/include/hw/watchdog/sbsa_gwdt.h b/include/hw/watchdog/sbsa_gwdt.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/watchdog/sbsa_gwdt.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2020 Linaro Limited + * + * Authors: + * Shashi Mallela <shashi.mallela@linaro.org> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + +#ifndef WDT_SBSA_GWDT_H +#define WDT_SBSA_GWDT_H + +#include "qemu/bitops.h" +#include "hw/sysbus.h" +#include "hw/irq.h" + +#define TYPE_WDT_SBSA "sbsa_gwdt" +#define SBSA_GWDT(obj) \ + OBJECT_CHECK(SBSA_GWDTState, (obj), TYPE_WDT_SBSA) +#define SBSA_GWDT_CLASS(klass) \ + OBJECT_CLASS_CHECK(SBSA_GWDTClass, (klass), TYPE_WDT_SBSA) +#define SBSA_GWDT_GET_CLASS(obj) \ + OBJECT_GET_CLASS(SBSA_GWDTClass, (obj), TYPE_WDT_SBSA) + +/* SBSA Generic Watchdog register definitions */ +/* refresh frame */ +#define SBSA_GWDT_WRR 0x000 + +/* control frame */ +#define SBSA_GWDT_WCS 0x000 +#define SBSA_GWDT_WOR 0x008 +#define SBSA_GWDT_WORU 0x00C +#define SBSA_GWDT_WCV 0x010 +#define SBSA_GWDT_WCVU 0x014 + +/* Watchdog Interface Identification Register */ +#define SBSA_GWDT_W_IIDR 0xFCC + +/* Watchdog Control and Status Register Bits */ +#define SBSA_GWDT_WCS_EN BIT(0) +#define SBSA_GWDT_WCS_WS0 BIT(1) +#define SBSA_GWDT_WCS_WS1 BIT(2) + +#define SBSA_GWDT_WOR_MASK 0x0000FFFF + +/* + * Watchdog Interface Identification Register definition + * considering JEP106 code for ARM in Bits [11:0] + */ +#define SBSA_GWDT_ID 0x1043B + +/* 2 Separate memory regions for each of refresh & control register frames */ +#define SBSA_GWDT_RMMIO_SIZE 0x1000 +#define SBSA_GWDT_CMMIO_SIZE 0x1000 + +#define SBSA_TIMER_FREQ 62500000 /* Hz */ + +typedef struct SBSA_GWDTState { + /* <private> */ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion rmmio; + MemoryRegion cmmio; + qemu_irq irq; + + QEMUTimer *timer; + + uint32_t id; + uint32_t wcs; + uint32_t worl; + uint32_t woru; + uint32_t wcvl; + uint32_t wcvu; +} SBSA_GWDTState; + +#endif /* WDT_SBSA_GWDT_H */ diff --git a/hw/watchdog/sbsa_gwdt.c b/hw/watchdog/sbsa_gwdt.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/watchdog/sbsa_gwdt.c @@ -XXX,XX +XXX,XX @@ +/* + * Generic watchdog device model for SBSA + * + * The watchdog device has been implemented as revision 1 variant of + * the ARM SBSA specification v6.0 + * (https://developer.arm.com/documentation/den0029/d?lang=en) + * + * Copyright Linaro.org 2020 + * + * Authors: + * Shashi Mallela <shashi.mallela@linaro.org> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "sysemu/reset.h" +#include "sysemu/watchdog.h" +#include "hw/watchdog/sbsa_gwdt.h" +#include "qemu/timer.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" + +static WatchdogTimerModel model = { + .wdt_name = TYPE_WDT_SBSA, + .wdt_description = "SBSA-compliant generic watchdog device", +}; + +static const VMStateDescription vmstate_sbsa_gwdt = { + .name = "sbsa-gwdt", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_TIMER_PTR(timer, SBSA_GWDTState), + VMSTATE_UINT32(wcs, SBSA_GWDTState), + VMSTATE_UINT32(worl, SBSA_GWDTState), + VMSTATE_UINT32(woru, SBSA_GWDTState), + VMSTATE_UINT32(wcvl, SBSA_GWDTState), + VMSTATE_UINT32(wcvu, SBSA_GWDTState), + VMSTATE_END_OF_LIST() + } +}; + +typedef enum WdtRefreshType { + EXPLICIT_REFRESH = 0, + TIMEOUT_REFRESH = 1, +} WdtRefreshType; + +static uint64_t sbsa_gwdt_rread(void *opaque, hwaddr addr, unsigned int size) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + uint32_t ret = 0; + + switch (addr) { + case SBSA_GWDT_WRR: + /* watch refresh read has no effect and returns 0 */ + ret = 0; + break; + case SBSA_GWDT_W_IIDR: + ret = s->id; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in refresh frame read :" + " 0x%x\n", (int)addr); + } + return ret; +} + +static uint64_t sbsa_gwdt_read(void *opaque, hwaddr addr, unsigned int size) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + uint32_t ret = 0; + + switch (addr) { + case SBSA_GWDT_WCS: + ret = s->wcs; + break; + case SBSA_GWDT_WOR: + ret = s->worl; + break; + case SBSA_GWDT_WORU: + ret = s->woru; + break; + case SBSA_GWDT_WCV: + ret = s->wcvl; + break; + case SBSA_GWDT_WCVU: + ret = s->wcvu; + break; + case SBSA_GWDT_W_IIDR: + ret = s->id; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in control frame read :" + " 0x%x\n", (int)addr); + } + return ret; +} + +static void sbsa_gwdt_update_timer(SBSA_GWDTState *s, WdtRefreshType rtype) +{ + uint64_t timeout = 0; + + timer_del(s->timer); + + if (s->wcs & SBSA_GWDT_WCS_EN) { + /* + * Extract the upper 16 bits from woru & 32 bits from worl + * registers to construct the 48 bit offset value + */ + timeout = s->woru; + timeout <<= 32; + timeout |= s->worl; + timeout = muldiv64(timeout, NANOSECONDS_PER_SECOND, SBSA_TIMER_FREQ); + timeout += qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + if ((rtype == EXPLICIT_REFRESH) || ((rtype == TIMEOUT_REFRESH) && + (!(s->wcs & SBSA_GWDT_WCS_WS0)))) { + /* store the current timeout value into compare registers */ + s->wcvu = timeout >> 32; + s->wcvl = timeout; + } + timer_mod(s->timer, timeout); + } +} + +static void sbsa_gwdt_rwrite(void *opaque, hwaddr offset, uint64_t data, + unsigned size) { + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + if (offset == SBSA_GWDT_WRR) { + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "bad address in refresh frame write :" + " 0x%x\n", (int)offset); + } +} + +static void sbsa_gwdt_write(void *opaque, hwaddr offset, uint64_t data, + unsigned size) { + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + switch (offset) { + case SBSA_GWDT_WCS: + s->wcs = data & SBSA_GWDT_WCS_EN; + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WOR: + s->worl = data; + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WORU: + s->woru = data & SBSA_GWDT_WOR_MASK; + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WCV: + s->wcvl = data; + break; + + case SBSA_GWDT_WCVU: + s->wcvu = data; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in control frame write :" + " 0x%x\n", (int)offset); + } + return; +} + +static void wdt_sbsa_gwdt_reset(DeviceState *dev) +{ + SBSA_GWDTState *s = SBSA_GWDT(dev); + + timer_del(s->timer); + + s->wcs = 0; + s->wcvl = 0; + s->wcvu = 0; + s->worl = 0; + s->woru = 0; + s->id = SBSA_GWDT_ID; +} + +static void sbsa_gwdt_timer_sysinterrupt(void *opaque) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + if (!(s->wcs & SBSA_GWDT_WCS_WS0)) { + s->wcs |= SBSA_GWDT_WCS_WS0; + sbsa_gwdt_update_timer(s, TIMEOUT_REFRESH); + qemu_set_irq(s->irq, 1); + } else { + s->wcs |= SBSA_GWDT_WCS_WS1; + qemu_log_mask(CPU_LOG_RESET, "Watchdog timer expired.\n"); + /* + * Reset the watchdog only if the guest gets notified about + * expiry. watchdog_perform_action() may temporarily relinquish + * the BQL; reset before triggering the action to avoid races with + * sbsa_gwdt instructions. + */ + switch (get_watchdog_action()) { + case WATCHDOG_ACTION_DEBUG: + case WATCHDOG_ACTION_NONE: + case WATCHDOG_ACTION_PAUSE: + break; + default: + wdt_sbsa_gwdt_reset(DEVICE(s)); + } + watchdog_perform_action(); + } +} + +static const MemoryRegionOps sbsa_gwdt_rops = { + .read = sbsa_gwdt_rread, + .write = sbsa_gwdt_rwrite, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .valid.unaligned = false, +}; + +static const MemoryRegionOps sbsa_gwdt_ops = { + .read = sbsa_gwdt_read, + .write = sbsa_gwdt_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .valid.unaligned = false, +}; + +static void wdt_sbsa_gwdt_realize(DeviceState *dev, Error **errp) +{ + SBSA_GWDTState *s = SBSA_GWDT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + memory_region_init_io(&s->rmmio, OBJECT(dev), + &sbsa_gwdt_rops, s, + "sbsa_gwdt.refresh", + SBSA_GWDT_RMMIO_SIZE); + + memory_region_init_io(&s->cmmio, OBJECT(dev), + &sbsa_gwdt_ops, s, + "sbsa_gwdt.control", + SBSA_GWDT_CMMIO_SIZE); + + sysbus_init_mmio(sbd, &s->rmmio); + sysbus_init_mmio(sbd, &s->cmmio); + + sysbus_init_irq(sbd, &s->irq); + + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sbsa_gwdt_timer_sysinterrupt, + dev); +} + +static void wdt_sbsa_gwdt_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = wdt_sbsa_gwdt_realize; + dc->reset = wdt_sbsa_gwdt_reset; + dc->hotpluggable = false; + set_bit(DEVICE_CATEGORY_MISC, dc->categories); + dc->vmsd = &vmstate_sbsa_gwdt; +} + +static const TypeInfo wdt_sbsa_gwdt_info = { + .class_init = wdt_sbsa_gwdt_class_init, + .parent = TYPE_SYS_BUS_DEVICE, + .name = TYPE_WDT_SBSA, + .instance_size = sizeof(SBSA_GWDTState), +}; + +static void wdt_sbsa_gwdt_register_types(void) +{ + watchdog_add_model(&model); + type_register_static(&wdt_sbsa_gwdt_info); +} + +type_init(wdt_sbsa_gwdt_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config SBSA_REF select PL031 # RTC select PL061 # GPIO select USB_EHCI_SYSBUS + select WDT_SBSA config SABRELITE bool diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Kconfig +++ b/hw/watchdog/Kconfig @@ -XXX,XX +XXX,XX @@ config WDT_DIAG288 config WDT_IMX2 bool + +config WDT_SBSA + bool diff --git a/hw/watchdog/meson.build b/hw/watchdog/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/meson.build +++ b/hw/watchdog/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_WDT_IB700', if_true: files('wdt_ib700.c')) softmmu_ss.add(when: 'CONFIG_WDT_DIAG288', if_true: files('wdt_diag288.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('wdt_aspeed.c')) softmmu_ss.add(when: 'CONFIG_WDT_IMX2', if_true: files('wdt_imx2.c')) +softmmu_ss.add(when: 'CONFIG_WDT_SBSA', if_true: files('sbsa_gwdt.c')) -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Included the newly implemented SBSA generic watchdog device model into SBSA platform Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201027015927.29495-3-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/usb.h" #include "hw/char/pl011.h" +#include "hw/watchdog/sbsa_gwdt.h" #include "net/net.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ enum { SBSA_GIC_DIST, SBSA_GIC_REDIST, SBSA_SECURE_EC, + SBSA_GWDT, + SBSA_GWDT_REFRESH, + SBSA_GWDT_CONTROL, SBSA_SMMU, SBSA_UART, SBSA_RTC, @@ -XXX,XX +XXX,XX @@ static const MemMapEntry sbsa_ref_memmap[] = { [SBSA_GIC_DIST] = { 0x40060000, 0x00010000 }, [SBSA_GIC_REDIST] = { 0x40080000, 0x04000000 }, [SBSA_SECURE_EC] = { 0x50000000, 0x00001000 }, + [SBSA_GWDT_REFRESH] = { 0x50010000, 0x00001000 }, + [SBSA_GWDT_CONTROL] = { 0x50011000, 0x00001000 }, [SBSA_UART] = { 0x60000000, 0x00001000 }, [SBSA_RTC] = { 0x60010000, 0x00001000 }, [SBSA_GPIO] = { 0x60020000, 0x00001000 }, @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { [SBSA_AHCI] = 10, [SBSA_EHCI] = 11, [SBSA_SMMU] = 12, /* ... to 15 */ + [SBSA_GWDT] = 16, }; static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx) @@ -XXX,XX +XXX,XX @@ static void create_rtc(const SBSAMachineState *sms) sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic, irq)); } +static void create_wdt(const SBSAMachineState *sms) +{ + hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base; + hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base; + DeviceState *dev = qdev_new(TYPE_WDT_SBSA); + SysBusDevice *s = SYS_BUS_DEVICE(dev); + int irq = sbsa_ref_irqmap[SBSA_GWDT]; + + sysbus_realize_and_unref(s, &error_fatal); + sysbus_mmio_map(s, 0, rbase); + sysbus_mmio_map(s, 1, cbase); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq)); +} + static DeviceState *gpio_key_dev; static void sbsa_ref_powerdown_req(Notifier *n, void *opaque) { @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) create_rtc(sms); + create_wdt(sms); + create_gpio(sms); create_ahci(sms); -- 2.20.1 In ptimer_reload(), we call the callback function provided by the timer device that is using the ptimer. This callback might disable the ptimer. The code mostly handles this correctly, except that we'll still print the warning about "Timer with delta zero, disabling" if the now-disabled timer happened to be set such that it would fire again immediately if it were enabled (eg because the limit/reload value is zero). Suppress the spurious warning message and the unnecessary repeat-deletion of the underlying timer in this case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20201015151829.14656-2-peter.maydell@linaro.org --- hw/core/ptimer.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ static void ptimer_reload(ptimer_state *s, int delta_adjust) } if (delta == 0) { + if (s->enabled == 0) { + /* trigger callback disabled the timer already */ + return; + } if (!qtest_enabled()) { fprintf(stderr, "Timer with delta zero, disabling\n"); } -- 2.20.1 The armv7m systick timer is a 24-bit decrementing, wrap-on-zero, clear-on-write counter. Our current implementation has various bugs and dubious workarounds in it (for instance see https://bugs.launchpad.net/qemu/+bug/1872237). We have an implementation of a simple decrementing counter and we put a lot of effort into making sure it handles the interesting corner cases (like "spend a cycle at 0 before reloading") -- ptimer. Rewrite the systick timer to use a ptimer rather than a raw QEMU timer. Unfortunately this is a migration compatibility break, which will affect all M-profile boards. Among other bugs, this fixes https://bugs.launchpad.net/qemu/+bug/1872237 : now writes to SYST_CVR when the timer is enabled correctly do nothing; when the timer is enabled via SYST_CSR.ENABLE, the ptimer code will (because of POLICY_NO_IMMEDIATE_RELOAD) arrange that after one timer tick the counter is reloaded from SYST_RVR and then counts down from there, as the architecture requires. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201015151829.14656-3-peter.maydell@linaro.org --- include/hw/timer/armv7m_systick.h | 3 +- hw/timer/armv7m_systick.c | 124 +++++++++++++----------------- 2 files changed, 54 insertions(+), 73 deletions(-) diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/armv7m_systick.h +++ b/include/hw/timer/armv7m_systick.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qom/object.h" +#include "hw/ptimer.h" #define TYPE_SYSTICK "armv7m_systick" @@ -XXX,XX +XXX,XX @@ struct SysTickState { uint32_t control; uint32_t reload; int64_t tick; - QEMUTimer *timer; + ptimer_state *ptimer; MemoryRegion iomem; qemu_irq irq; }; diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/armv7m_systick.c +++ b/hw/timer/armv7m_systick.c @@ -XXX,XX +XXX,XX @@ static inline int64_t systick_scale(SysTickState *s) } } -static void systick_reload(SysTickState *s, int reset) -{ - /* The Cortex-M3 Devices Generic User Guide says that "When the - * ENABLE bit is set to 1, the counter loads the RELOAD value from the - * SYST RVR register and then counts down". So, we need to check the - * ENABLE bit before reloading the value. - */ - trace_systick_reload(); - - if ((s->control & SYSTICK_ENABLE) == 0) { - return; - } - - if (reset) { - s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - } - s->tick += (s->reload + 1) * systick_scale(s); - timer_mod(s->timer, s->tick); -} - static void systick_timer_tick(void *opaque) { SysTickState *s = (SysTickState *)opaque; @@ -XXX,XX +XXX,XX @@ static void systick_timer_tick(void *opaque) /* Tell the NVIC to pend the SysTick exception */ qemu_irq_pulse(s->irq); } - if (s->reload == 0) { - s->control &= ~SYSTICK_ENABLE; - } else { - systick_reload(s, 0); + if (ptimer_get_limit(s->ptimer) == 0) { + /* + * Timer expiry with SYST_RVR zero disables the timer + * (but doesn't clear SYST_CSR.ENABLE) + */ + ptimer_stop(s->ptimer); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult systick_read(void *opaque, hwaddr addr, uint64_t *data, s->control &= ~SYSTICK_COUNTFLAG; break; case 0x4: /* SysTick Reload Value. */ - val = s->reload; + val = ptimer_get_limit(s->ptimer); break; case 0x8: /* SysTick Current Value. */ - { - int64_t t; - - if ((s->control & SYSTICK_ENABLE) == 0) { - val = 0; - break; - } - t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (t >= s->tick) { - val = 0; - break; - } - val = ((s->tick - (t + 1)) / systick_scale(s)) + 1; - /* The interrupt in triggered when the timer reaches zero. - However the counter is not reloaded until the next clock - tick. This is a hack to return zero during the first tick. */ - if (val > s->reload) { - val = 0; - } + val = ptimer_get_count(s->ptimer); break; - } case 0xc: /* SysTick Calibration Value. */ val = 10000; break; @@ -XXX,XX +XXX,XX @@ static MemTxResult systick_write(void *opaque, hwaddr addr, switch (addr) { case 0x0: /* SysTick Control and Status. */ { - uint32_t oldval = s->control; + uint32_t oldval; + ptimer_transaction_begin(s->ptimer); + oldval = s->control; s->control &= 0xfffffff8; s->control |= value & 7; + if ((oldval ^ value) & SYSTICK_ENABLE) { - int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); if (value & SYSTICK_ENABLE) { - if (s->tick) { - s->tick += now; - timer_mod(s->timer, s->tick); - } else { - systick_reload(s, 1); - } + /* + * Always reload the period in case board code has + * changed system_clock_scale. If we ever replace that + * global with a more sensible API then we might be able + * to set the period only when it actually changes. + */ + ptimer_set_period(s->ptimer, systick_scale(s)); + ptimer_run(s->ptimer, 0); } else { - timer_del(s->timer); - s->tick -= now; - if (s->tick < 0) { - s->tick = 0; - } + ptimer_stop(s->ptimer); } } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { - /* This is a hack. Force the timer to be reloaded - when the reference clock is changed. */ - systick_reload(s, 1); + ptimer_set_period(s->ptimer, systick_scale(s)); } + ptimer_transaction_commit(s->ptimer); break; } case 0x4: /* SysTick Reload Value. */ - s->reload = value; + ptimer_transaction_begin(s->ptimer); + ptimer_set_limit(s->ptimer, value & 0xffffff, 0); + ptimer_transaction_commit(s->ptimer); break; - case 0x8: /* SysTick Current Value. Writes reload the timer. */ - systick_reload(s, 1); + case 0x8: /* SysTick Current Value. */ + /* + * Writing any value clears SYST_CVR to zero and clears + * SYST_CSR.COUNTFLAG. The counter will then reload from SYST_RVR + * on the next clock edge unless SYST_RVR is zero. + */ + ptimer_transaction_begin(s->ptimer); + if (ptimer_get_limit(s->ptimer) == 0) { + ptimer_stop(s->ptimer); + } + ptimer_set_count(s->ptimer, 0); s->control &= ~SYSTICK_COUNTFLAG; + ptimer_transaction_commit(s->ptimer); break; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void systick_reset(DeviceState *dev) */ assert(system_clock_scale != 0); + ptimer_transaction_begin(s->ptimer); s->control = 0; - s->reload = 0; - s->tick = 0; - timer_del(s->timer); + ptimer_stop(s->ptimer); + ptimer_set_count(s->ptimer, 0); + ptimer_set_limit(s->ptimer, 0, 0); + ptimer_set_period(s->ptimer, systick_scale(s)); + ptimer_transaction_commit(s->ptimer); } static void systick_instance_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void systick_instance_init(Object *obj) static void systick_realize(DeviceState *dev, Error **errp) { SysTickState *s = SYSTICK(dev); - s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); + s->ptimer = ptimer_init(systick_timer_tick, s, + PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT); } static const VMStateDescription vmstate_systick = { .name = "armv7m_systick", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(control, SysTickState), - VMSTATE_UINT32(reload, SysTickState), VMSTATE_INT64(tick, SysTickState), - VMSTATE_TIMER_PTR(timer, SysTickState), + VMSTATE_PTIMER(ptimer, SysTickState), VMSTATE_END_OF_LIST() } }; -- 2.20.1 Another go at the v8.5-MemTag linux-user support, plus a couple more npcm7xx devices. -- PMM The following changes since commit 8ba4bca570ace1e60614a0808631a517cf5df67a: Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2021-02-15 17:13:57 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210216 for you to fetch changes up to 64fd5bddf3b71d1b92b55382ab39768bd87ecfbd: tests/qtests: Add npcm7xx emc model test (2021-02-16 14:27:05 +0000) ---------------------------------------------------------------- target-arm queue: * Support ARMv8.5-MemTag for linux-user * ncpm7xx: Support SMBus, EMC ethernet devices * MAINTAINERS: add section for Clock framework ---------------------------------------------------------------- Doug Evans (3): hw/net: Add npcm7xx emc model hw/arm: Add npcm7xx emc model tests/qtests: Add npcm7xx emc model test Hao Wu (5): hw/i2c: Implement NPCM7XX SMBus Module Single Mode hw/arm: Add I2C sensors for NPCM750 eval board hw/arm: Add I2C sensors and EEPROM for GSJ machine hw/i2c: Add a QTest for NPCM7XX SMBus Device hw/i2c: Implement NPCM7XX SMBus Module FIFO Mode Luc Michel (1): MAINTAINERS: add myself maintainer for the clock framework Richard Henderson (31): tcg: Introduce target-specific page data for user-only linux-user: Introduce PAGE_ANON exec: Use uintptr_t for guest_base exec: Use uintptr_t in cpu_ldst.h exec: Improve types for guest_addr_valid linux-user: Check for overflow in access_ok linux-user: Tidy VERIFY_READ/VERIFY_WRITE bsd-user: Tidy VERIFY_READ/VERIFY_WRITE linux-user: Do not use guest_addr_valid for h2g_valid linux-user: Fix guest_addr_valid vs reserved_va exec: Introduce cpu_untagged_addr exec: Use cpu_untagged_addr in g2h; split out g2h_untagged linux-user: Explicitly untag memory management syscalls linux-user: Use guest_range_valid in access_ok exec: Rename guest_{addr,range}_valid to *_untagged linux-user: Use cpu_untagged_addr in access_ok; split out *_untagged linux-user: Move lock_user et al out of line linux-user: Fix types in uaccess.c linux-user: Handle tags in lock_user/unlock_user linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE target/arm: Improve gen_top_byte_ignore target/arm: Use the proper TBI settings for linux-user linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAG linux-user/aarch64: Implement PROT_MTE target/arm: Split out syndrome.h from internals.h linux-user/aarch64: Pass syndrome to EXC_*_ABORT linux-user/aarch64: Signal SEGV_MTESERR for sync tag check fault linux-user/aarch64: Signal SEGV_MTEAERR for async tag check error target/arm: Add allocation tag storage for user mode target/arm: Enable MTE for user-only tests/tcg/aarch64: Add mte smoke tests docs/system/arm/nuvoton.rst | 5 +- bsd-user/qemu.h | 17 +- include/exec/cpu-all.h | 47 +- include/exec/cpu_ldst.h | 39 +- include/exec/exec-all.h | 2 +- include/hw/arm/npcm7xx.h | 4 + include/hw/i2c/npcm7xx_smbus.h | 113 ++++ include/hw/net/npcm7xx_emc.h | 286 +++++++++ linux-user/aarch64/target_signal.h | 3 + linux-user/aarch64/target_syscall.h | 13 + linux-user/qemu.h | 76 +-- linux-user/syscall_defs.h | 1 + target/arm/cpu-param.h | 3 + target/arm/cpu.h | 32 + target/arm/internals.h | 249 +------- target/arm/syndrome.h | 273 +++++++++ tests/tcg/aarch64/mte.h | 60 ++ accel/tcg/translate-all.c | 32 +- accel/tcg/user-exec.c | 51 +- bsd-user/elfload.c | 2 +- bsd-user/main.c | 8 +- bsd-user/mmap.c | 23 +- hw/arm/npcm7xx.c | 118 +++- hw/arm/npcm7xx_boards.c | 46 ++ hw/i2c/npcm7xx_smbus.c | 1099 +++++++++++++++++++++++++++++++++++ hw/net/npcm7xx_emc.c | 857 +++++++++++++++++++++++++++ linux-user/aarch64/cpu_loop.c | 38 +- linux-user/elfload.c | 18 +- linux-user/flatload.c | 2 +- linux-user/hppa/cpu_loop.c | 39 +- linux-user/i386/cpu_loop.c | 6 +- linux-user/i386/signal.c | 5 +- linux-user/main.c | 4 +- linux-user/mmap.c | 88 +-- linux-user/ppc/signal.c | 4 +- linux-user/syscall.c | 165 ++++-- linux-user/uaccess.c | 82 ++- target/arm/cpu.c | 25 +- target/arm/helper-a64.c | 4 +- target/arm/mte_helper.c | 39 +- target/arm/tlb_helper.c | 15 +- target/arm/translate-a64.c | 25 +- target/hppa/op_helper.c | 2 +- target/i386/tcg/mem_helper.c | 2 +- target/s390x/mem_helper.c | 4 +- tests/qtest/npcm7xx_emc-test.c | 862 +++++++++++++++++++++++++++ tests/qtest/npcm7xx_smbus-test.c | 495 ++++++++++++++++ tests/tcg/aarch64/mte-1.c | 28 + tests/tcg/aarch64/mte-2.c | 45 ++ tests/tcg/aarch64/mte-3.c | 51 ++ tests/tcg/aarch64/mte-4.c | 45 ++ tests/tcg/aarch64/pauth-2.c | 1 - MAINTAINERS | 11 + hw/arm/Kconfig | 1 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 12 + hw/net/meson.build | 1 + hw/net/trace-events | 17 + tests/qtest/meson.build | 2 + tests/tcg/aarch64/Makefile.target | 6 + tests/tcg/configure.sh | 4 + 61 files changed, 5052 insertions(+), 556 deletions(-) create mode 100644 include/hw/i2c/npcm7xx_smbus.h create mode 100644 include/hw/net/npcm7xx_emc.h create mode 100644 target/arm/syndrome.h create mode 100644 tests/tcg/aarch64/mte.h create mode 100644 hw/i2c/npcm7xx_smbus.c create mode 100644 hw/net/npcm7xx_emc.c create mode 100644 tests/qtest/npcm7xx_emc-test.c create mode 100644 tests/qtest/npcm7xx_smbus-test.c create mode 100644 tests/tcg/aarch64/mte-1.c create mode 100644 tests/tcg/aarch64/mte-2.c create mode 100644 tests/tcg/aarch64/mte-3.c create mode 100644 tests/tcg/aarch64/mte-4.c From: Richard Henderson <richard.henderson@linaro.org> This data can be allocated by page_alloc_target_data() and released by page_set_flags(start, end, prot | PAGE_RESET). This data will be used to hold tag memory for AArch64 MTE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 42 +++++++++++++++++++++++++++++++++------ accel/tcg/translate-all.c | 28 ++++++++++++++++++++++++++ linux-user/mmap.c | 4 +++- linux-user/syscall.c | 4 ++-- 4 files changed, 69 insertions(+), 9 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; #define PAGE_EXEC 0x0004 #define PAGE_BITS (PAGE_READ | PAGE_WRITE | PAGE_EXEC) #define PAGE_VALID 0x0008 -/* original state of the write flag (used when tracking self-modifying - code */ +/* + * Original state of the write flag (used when tracking self-modifying code) + */ #define PAGE_WRITE_ORG 0x0010 -/* Invalidate the TLB entry immediately, helpful for s390x - * Low-Address-Protection. Used with PAGE_WRITE in tlb_set_page_with_attrs() */ -#define PAGE_WRITE_INV 0x0040 +/* + * Invalidate the TLB entry immediately, helpful for s390x + * Low-Address-Protection. Used with PAGE_WRITE in tlb_set_page_with_attrs() + */ +#define PAGE_WRITE_INV 0x0020 +/* For use with page_set_flags: page is being replaced; target_data cleared. */ +#define PAGE_RESET 0x0040 + #if defined(CONFIG_BSD) && defined(CONFIG_USER_ONLY) /* FIXME: Code that sets/uses this is broken and needs to go away. */ -#define PAGE_RESERVED 0x0020 +#define PAGE_RESERVED 0x0100 #endif /* Target-specific bits that will be used via page_get_flags(). */ #define PAGE_TARGET_1 0x0080 @@ -XXX,XX +XXX,XX @@ int walk_memory_regions(void *, walk_memory_regions_fn); int page_get_flags(target_ulong address); void page_set_flags(target_ulong start, target_ulong end, int flags); int page_check_range(target_ulong start, target_ulong len, int flags); + +/** + * page_alloc_target_data(address, size) + * @address: guest virtual address + * @size: size of data to allocate + * + * Allocate @size bytes of out-of-band data to associate with the + * guest page at @address. If the page is not mapped, NULL will + * be returned. If there is existing data associated with @address, + * no new memory will be allocated. + * + * The memory will be freed when the guest page is deallocated, + * e.g. with the munmap system call. + */ +void *page_alloc_target_data(target_ulong address, size_t size); + +/** + * page_get_target_data(address) + * @address: guest virtual address + * + * Return any out-of-bound memory assocated with the guest page + * at @address, as per page_alloc_target_data. + */ +void *page_get_target_data(target_ulong address); #endif CPUArchState *cpu_copy(CPUArchState *env); diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ typedef struct PageDesc { unsigned int code_write_count; #else unsigned long flags; + void *target_data; #endif #ifndef CONFIG_USER_ONLY QemuSpin lock; @@ -XXX,XX +XXX,XX @@ int page_get_flags(target_ulong address) void page_set_flags(target_ulong start, target_ulong end, int flags) { target_ulong addr, len; + bool reset_target_data; /* This function should never be called with addresses outside the guest address space. If this assert fires, it probably indicates @@ -XXX,XX +XXX,XX @@ void page_set_flags(target_ulong start, target_ulong end, int flags) if (flags & PAGE_WRITE) { flags |= PAGE_WRITE_ORG; } + reset_target_data = !(flags & PAGE_VALID) || (flags & PAGE_RESET); + flags &= ~PAGE_RESET; for (addr = start, len = end - start; len != 0; @@ -XXX,XX +XXX,XX @@ void page_set_flags(target_ulong start, target_ulong end, int flags) p->first_tb) { tb_invalidate_phys_page(addr, 0); } + if (reset_target_data && p->target_data) { + g_free(p->target_data); + p->target_data = NULL; + } p->flags = flags; } } +void *page_get_target_data(target_ulong address) +{ + PageDesc *p = page_find(address >> TARGET_PAGE_BITS); + return p ? p->target_data : NULL; +} + +void *page_alloc_target_data(target_ulong address, size_t size) +{ + PageDesc *p = page_find(address >> TARGET_PAGE_BITS); + void *ret = NULL; + + if (p->flags & PAGE_VALID) { + ret = p->target_data; + if (!ret) { + p->target_data = ret = g_malloc0(size); + } + } + return ret; +} + int page_check_range(target_ulong start, target_ulong len, int flags) { PageDesc *p; diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, } } the_end1: + page_flags |= PAGE_RESET; page_set_flags(start, start + len, page_flags); the_end: trace_target_mmap_complete(start); @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, new_addr = h2g(host_addr); prot = page_get_flags(old_addr); page_set_flags(old_addr, old_addr + old_size, 0); - page_set_flags(new_addr, new_addr + new_size, prot | PAGE_VALID); + page_set_flags(new_addr, new_addr + new_size, + prot | PAGE_VALID | PAGE_RESET); } tb_invalidate_phys_range(new_addr, new_addr + new_size); mmap_unlock(); diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, raddr=h2g((unsigned long)host_raddr); page_set_flags(raddr, raddr + shm_info.shm_segsz, - PAGE_VALID | PAGE_READ | - ((shmflg & SHM_RDONLY)? 0 : PAGE_WRITE)); + PAGE_VALID | PAGE_RESET | PAGE_READ | + (shmflg & SHM_RDONLY ? 0 : PAGE_WRITE)); for (i = 0; i < N_SHM_REGIONS; i++) { if (!shm_regions[i].in_use) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Record whether the backing page is anonymous, or if it has file backing. This will allow us to get close to the Linux AArch64 ABI for MTE, which allows tag memory only on ram-backed VMAs. The real ABI allows tag memory on files, when those files are on ram-backed filesystems, such as tmpfs. We will not be able to implement that in QEMU linux-user. Thankfully, anonymous memory for malloc arenas is the primary consumer of this feature, so this restricted version should still be of use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 2 ++ linux-user/mmap.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; #define PAGE_WRITE_INV 0x0020 /* For use with page_set_flags: page is being replaced; target_data cleared. */ #define PAGE_RESET 0x0040 +/* For linux-user, indicates that the page is MAP_ANON. */ +#define PAGE_ANON 0x0080 #if defined(CONFIG_BSD) && defined(CONFIG_USER_ONLY) /* FIXME: Code that sets/uses this is broken and needs to go away. */ diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, } } the_end1: + if (flags & MAP_ANONYMOUS) { + page_flags |= PAGE_ANON; + } page_flags |= PAGE_RESET; page_set_flags(start, start + len, page_flags); the_end: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is more descriptive than 'unsigned long'. No functional change, since these match on all linux+bsd hosts. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 2 +- bsd-user/main.c | 4 ++-- linux-user/elfload.c | 4 ++-- linux-user/main.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ static inline void tswap64s(uint64_t *s) /* On some host systems the guest address space is reserved on the host. * This allows the guest address space to be offset to a convenient location. */ -extern unsigned long guest_base; +extern uintptr_t guest_base; extern bool have_guest_base; extern unsigned long reserved_va; diff --git a/bsd-user/main.c b/bsd-user/main.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/main.c +++ b/bsd-user/main.c @@ -XXX,XX +XXX,XX @@ int singlestep; unsigned long mmap_min_addr; -unsigned long guest_base; +uintptr_t guest_base; bool have_guest_base; unsigned long reserved_va; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) g_free(target_environ); if (qemu_loglevel_mask(CPU_LOG_PAGE)) { - qemu_log("guest_base 0x%lx\n", guest_base); + qemu_log("guest_base %p\n", (void *)guest_base); log_page_dump("binary load"); qemu_log("start_brk 0x" TARGET_ABI_FMT_lx "\n", info->start_brk); diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void pgb_have_guest_base(const char *image_name, abi_ulong guest_loaddr, void *addr, *test; if (!QEMU_IS_ALIGNED(guest_base, align)) { - fprintf(stderr, "Requested guest base 0x%lx does not satisfy " + fprintf(stderr, "Requested guest base %p does not satisfy " "host minimum alignment (0x%lx)\n", - guest_base, align); + (void *)guest_base, align); exit(EXIT_FAILURE); } diff --git a/linux-user/main.c b/linux-user/main.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/main.c +++ b/linux-user/main.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_model; static const char *cpu_type; static const char *seed_optarg; unsigned long mmap_min_addr; -unsigned long guest_base; +uintptr_t guest_base; bool have_guest_base; /* @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv, char **envp) g_free(target_environ); if (qemu_loglevel_mask(CPU_LOG_PAGE)) { - qemu_log("guest_base 0x%lx\n", guest_base); + qemu_log("guest_base %p\n", (void *)guest_base); log_page_dump("binary load"); qemu_log("start_brk 0x" TARGET_ABI_FMT_lx "\n", info->start_brk); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is more descriptive than 'unsigned long'. No functional change, since these match on all linux+bsd hosts. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; #endif /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ -#define g2h(x) ((void *)((unsigned long)(abi_ptr)(x) + guest_base)) +#define g2h(x) ((void *)((uintptr_t)(abi_ptr)(x) + guest_base)) #if HOST_LONG_BITS <= TARGET_VIRT_ADDR_SPACE_BITS #define guest_addr_valid(x) (1) #else #define guest_addr_valid(x) ((x) <= GUEST_ADDR_MAX) #endif -#define h2g_valid(x) guest_addr_valid((unsigned long)(x) - guest_base) +#define h2g_valid(x) guest_addr_valid((uintptr_t)(x) - guest_base) static inline int guest_range_valid(unsigned long start, unsigned long len) { @@ -XXX,XX +XXX,XX @@ static inline int guest_range_valid(unsigned long start, unsigned long len) } #define h2g_nocheck(x) ({ \ - unsigned long __ret = (unsigned long)(x) - guest_base; \ + uintptr_t __ret = (uintptr_t)(x) - guest_base; \ (abi_ptr)__ret; \ }) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Return bool not int; pass abi_ulong not 'unsigned long'. All callers use abi_ulong already, so the change in type has no effect. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; #endif #define h2g_valid(x) guest_addr_valid((uintptr_t)(x) - guest_base) -static inline int guest_range_valid(unsigned long start, unsigned long len) +static inline bool guest_range_valid(abi_ulong start, abi_ulong len) { return len - 1 <= GUEST_ADDR_MAX && start <= GUEST_ADDR_MAX - len + 1; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Verify that addr + size - 1 does not wrap around. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; #define VERIFY_READ 0 #define VERIFY_WRITE 1 /* implies read access */ -static inline int access_ok(int type, abi_ulong addr, abi_ulong size) +static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { - return guest_addr_valid(addr) && - (size == 0 || guest_addr_valid(addr + size - 1)) && - page_check_range((target_ulong)addr, size, - (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0; + if (!guest_addr_valid(addr)) { + return false; + } + if (size != 0 && + (addr + size - 1 < addr || + !guest_addr_valid(addr + size - 1))) { + return false; + } + return page_check_range((target_ulong)addr, size, + (type == VERIFY_READ) ? PAGE_READ : + (PAGE_READ | PAGE_WRITE)) == 0; } /* NOTE __get_user and __put_user use host pointers and don't check access. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These constants are only ever used with access_ok, and friends. Rather than translating them to PAGE_* bits, let them equal the PAGE_* bits to begin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; /* user access */ -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 /* implies read access */ +#define VERIFY_READ PAGE_READ +#define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { @@ -XXX,XX +XXX,XX @@ static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) !guest_addr_valid(addr + size - 1))) { return false; } - return page_check_range((target_ulong)addr, size, - (type == VERIFY_READ) ? PAGE_READ : - (PAGE_READ | PAGE_WRITE)) == 0; + return page_check_range((target_ulong)addr, size, type) == 0; } /* NOTE __get_user and __put_user use host pointers and don't check access. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These constants are only ever used with access_ok, and friends. Rather than translating them to PAGE_* bits, let them equal the PAGE_* bits to begin. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- bsd-user/qemu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/bsd-user/qemu.h b/bsd-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/qemu.h +++ b/bsd-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long x86_stack_size; /* user access */ -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 /* implies read access */ +#define VERIFY_READ PAGE_READ +#define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) -static inline int access_ok(int type, abi_ulong addr, abi_ulong size) +static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { - return page_check_range((target_ulong)addr, size, - (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0; + return page_check_range((target_ulong)addr, size, type) == 0; } /* NOTE __get_user and __put_user use host pointers and don't check access. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the only use of guest_addr_valid that does not begin with a guest address, but a host address being transformed to a guest address. We will shortly adjust guest_addr_valid to handle guest memory tags, and the host address should not be subjected to that. Move h2g_valid adjacent to the other h2g macros. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; #else #define guest_addr_valid(x) ((x) <= GUEST_ADDR_MAX) #endif -#define h2g_valid(x) guest_addr_valid((uintptr_t)(x) - guest_base) static inline bool guest_range_valid(abi_ulong start, abi_ulong len) { return len - 1 <= GUEST_ADDR_MAX && start <= GUEST_ADDR_MAX - len + 1; } +#define h2g_valid(x) \ + (HOST_LONG_BITS <= TARGET_VIRT_ADDR_SPACE_BITS || \ + (uintptr_t)(x) - guest_base <= GUEST_ADDR_MAX) + #define h2g_nocheck(x) ({ \ uintptr_t __ret = (uintptr_t)(x) - guest_base; \ (abi_ptr)__ret; \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We must always use GUEST_ADDR_MAX, because even 32-bit hosts can use -R <reserved_va> to restrict the memory address of the guest. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ #define g2h(x) ((void *)((uintptr_t)(abi_ptr)(x) + guest_base)) -#if HOST_LONG_BITS <= TARGET_VIRT_ADDR_SPACE_BITS -#define guest_addr_valid(x) (1) -#else -#define guest_addr_valid(x) ((x) <= GUEST_ADDR_MAX) -#endif +static inline bool guest_addr_valid(abi_ulong x) +{ + return x <= GUEST_ADDR_MAX; +} static inline bool guest_range_valid(abi_ulong start, abi_ulong len) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Provide an identity fallback for target that do not use tagged addresses. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ typedef uint64_t abi_ptr; #define TARGET_ABI_FMT_ptr "%"PRIx64 #endif +#ifndef TARGET_TAGGED_ADDRESSES +static inline abi_ptr cpu_untagged_addr(CPUState *cs, abi_ptr x) +{ + return x; +} +#endif + /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ #define g2h(x) ((void *)((uintptr_t)(abi_ptr)(x) + guest_base)) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use g2h_untagged in contexts that have no cpu, e.g. the binary loaders that operate before the primary cpu is created. As a colollary, target_mmap and friends must use untagged addresses, since they are used by the loaders. Use g2h_untagged on values returned from target_mmap, as the kernel never applies a tag itself. Use g2h_untagged on all pc values. The only current user of tags, aarch64, removes tags from code addresses upon branch, so "pc" is always untagged. Use g2h with the cpu context on hand wherever possible. Use g2h_untagged in lock_user, which will be updated soon. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- bsd-user/qemu.h | 8 ++-- include/exec/cpu_ldst.h | 12 +++++- include/exec/exec-all.h | 2 +- linux-user/qemu.h | 6 +-- accel/tcg/translate-all.c | 4 +- accel/tcg/user-exec.c | 48 ++++++++++++------------ bsd-user/elfload.c | 2 +- bsd-user/main.c | 4 +- bsd-user/mmap.c | 23 ++++++------ linux-user/elfload.c | 12 +++--- linux-user/flatload.c | 2 +- linux-user/hppa/cpu_loop.c | 31 ++++++++-------- linux-user/i386/cpu_loop.c | 4 +- linux-user/mmap.c | 45 +++++++++++----------- linux-user/ppc/signal.c | 4 +- linux-user/syscall.c | 72 +++++++++++++++++++----------------- target/arm/helper-a64.c | 4 +- target/hppa/op_helper.c | 2 +- target/i386/tcg/mem_helper.c | 2 +- target/s390x/mem_helper.c | 4 +- 20 files changed, 154 insertions(+), 137 deletions(-) diff --git a/bsd-user/qemu.h b/bsd-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/qemu.h +++ b/bsd-user/qemu.h @@ -XXX,XX +XXX,XX @@ static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy void *addr; addr = g_malloc(len); if (copy) - memcpy(addr, g2h(guest_addr), len); + memcpy(addr, g2h_untagged(guest_addr), len); else memset(addr, 0, len); return addr; } #else - return g2h(guest_addr); + return g2h_untagged(guest_addr); #endif } @@ -XXX,XX +XXX,XX @@ static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, #ifdef DEBUG_REMAP if (!host_ptr) return; - if (host_ptr == g2h(guest_addr)) + if (host_ptr == g2h_untagged(guest_addr)) return; if (len > 0) - memcpy(g2h(guest_addr), host_ptr, len); + memcpy(g2h_untagged(guest_addr), host_ptr, len); g_free(host_ptr); #endif } diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ static inline abi_ptr cpu_untagged_addr(CPUState *cs, abi_ptr x) #endif /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ -#define g2h(x) ((void *)((uintptr_t)(abi_ptr)(x) + guest_base)) +static inline void *g2h_untagged(abi_ptr x) +{ + return (void *)((uintptr_t)(x) + guest_base); +} + +static inline void *g2h(CPUState *cs, abi_ptr x) +{ + return g2h_untagged(cpu_untagged_addr(cs, x)); +} static inline bool guest_addr_valid(abi_ulong x) { @@ -XXX,XX +XXX,XX @@ static inline int cpu_ldsw_code(CPUArchState *env, abi_ptr addr) static inline void *tlb_vaddr_to_host(CPUArchState *env, abi_ptr addr, MMUAccessType access_type, int mmu_idx) { - return g2h(addr); + return g2h(env_cpu(env), addr); } #else void *tlb_vaddr_to_host(CPUArchState *env, abi_ptr addr, diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -XXX,XX +XXX,XX @@ static inline tb_page_addr_t get_page_addr_code_hostp(CPUArchState *env, void **hostp) { if (hostp) { - *hostp = g2h(addr); + *hostp = g2h_untagged(addr); } return addr; } diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy return addr; } #else - return g2h(guest_addr); + return g2h_untagged(guest_addr); #endif } @@ -XXX,XX +XXX,XX @@ static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, #ifdef DEBUG_REMAP if (!host_ptr) return; - if (host_ptr == g2h(guest_addr)) + if (host_ptr == g2h_untagged(guest_addr)) return; if (len > 0) - memcpy(g2h(guest_addr), host_ptr, len); + memcpy(g2h_untagged(guest_addr), host_ptr, len); g_free(host_ptr); #endif } diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ static inline void tb_page_add(PageDesc *p, TranslationBlock *tb, prot |= p2->flags; p2->flags &= ~PAGE_WRITE; } - mprotect(g2h(page_addr), qemu_host_page_size, + mprotect(g2h_untagged(page_addr), qemu_host_page_size, (prot & PAGE_BITS) & ~PAGE_WRITE); if (DEBUG_TB_INVALIDATE_GATE) { printf("protecting code page: 0x" TB_PAGE_ADDR_FMT "\n", page_addr); @@ -XXX,XX +XXX,XX @@ int page_unprotect(target_ulong address, uintptr_t pc) } #endif } - mprotect((void *)g2h(host_start), qemu_host_page_size, + mprotect((void *)g2h_untagged(host_start), qemu_host_page_size, prot & PAGE_BITS); } mmap_unlock(); diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/user-exec.c +++ b/accel/tcg/user-exec.c @@ -XXX,XX +XXX,XX @@ int probe_access_flags(CPUArchState *env, target_ulong addr, int flags; flags = probe_access_internal(env, addr, 0, access_type, nonfault, ra); - *phost = flags ? NULL : g2h(addr); + *phost = flags ? NULL : g2h(env_cpu(env), addr); return flags; } @@ -XXX,XX +XXX,XX @@ void *probe_access(CPUArchState *env, target_ulong addr, int size, flags = probe_access_internal(env, addr, size, access_type, false, ra); g_assert(flags == 0); - return size ? g2h(addr) : NULL; + return size ? g2h(env_cpu(env), addr) : NULL; } #if defined(__i386__) @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldub_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_UB, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldub_p(g2h(ptr)); + ret = ldub_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ int cpu_ldsb_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_SB, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldsb_p(g2h(ptr)); + ret = ldsb_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_lduw_be_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_BEUW, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = lduw_be_p(g2h(ptr)); + ret = lduw_be_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ int cpu_ldsw_be_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_BESW, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldsw_be_p(g2h(ptr)); + ret = ldsw_be_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldl_be_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_BEUL, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldl_be_p(g2h(ptr)); + ret = ldl_be_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint64_t cpu_ldq_be_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_BEQ, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldq_be_p(g2h(ptr)); + ret = ldq_be_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_lduw_le_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_LEUW, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = lduw_le_p(g2h(ptr)); + ret = lduw_le_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ int cpu_ldsw_le_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_LESW, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldsw_le_p(g2h(ptr)); + ret = ldsw_le_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldl_le_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_LEUL, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldl_le_p(g2h(ptr)); + ret = ldl_le_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ uint64_t cpu_ldq_le_data(CPUArchState *env, abi_ptr ptr) uint16_t meminfo = trace_mem_get_info(MO_LEQ, MMU_USER_IDX, false); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - ret = ldq_le_p(g2h(ptr)); + ret = ldq_le_p(g2h(env_cpu(env), ptr)); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); return ret; } @@ -XXX,XX +XXX,XX @@ void cpu_stb_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_UB, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stb_p(g2h(ptr), val); + stb_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stw_be_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_BEUW, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stw_be_p(g2h(ptr), val); + stw_be_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stl_be_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_BEUL, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stl_be_p(g2h(ptr), val); + stl_be_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stq_be_data(CPUArchState *env, abi_ptr ptr, uint64_t val) uint16_t meminfo = trace_mem_get_info(MO_BEQ, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stq_be_p(g2h(ptr), val); + stq_be_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stw_le_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_LEUW, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stw_le_p(g2h(ptr), val); + stw_le_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stl_le_data(CPUArchState *env, abi_ptr ptr, uint32_t val) uint16_t meminfo = trace_mem_get_info(MO_LEUL, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stl_le_p(g2h(ptr), val); + stl_le_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ void cpu_stq_le_data(CPUArchState *env, abi_ptr ptr, uint64_t val) uint16_t meminfo = trace_mem_get_info(MO_LEQ, MMU_USER_IDX, true); trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo); - stq_le_p(g2h(ptr), val); + stq_le_p(g2h(env_cpu(env), ptr), val); qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo); } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldub_code(CPUArchState *env, abi_ptr ptr) uint32_t ret; set_helper_retaddr(1); - ret = ldub_p(g2h(ptr)); + ret = ldub_p(g2h_untagged(ptr)); clear_helper_retaddr(); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_lduw_code(CPUArchState *env, abi_ptr ptr) uint32_t ret; set_helper_retaddr(1); - ret = lduw_p(g2h(ptr)); + ret = lduw_p(g2h_untagged(ptr)); clear_helper_retaddr(); return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t cpu_ldl_code(CPUArchState *env, abi_ptr ptr) uint32_t ret; set_helper_retaddr(1); - ret = ldl_p(g2h(ptr)); + ret = ldl_p(g2h_untagged(ptr)); clear_helper_retaddr(); return ret; } @@ -XXX,XX +XXX,XX @@ uint64_t cpu_ldq_code(CPUArchState *env, abi_ptr ptr) uint64_t ret; set_helper_retaddr(1); - ret = ldq_p(g2h(ptr)); + ret = ldq_p(g2h_untagged(ptr)); clear_helper_retaddr(); return ret; } @@ -XXX,XX +XXX,XX @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr, if (unlikely(addr & (size - 1))) { cpu_loop_exit_atomic(env_cpu(env), retaddr); } - void *ret = g2h(addr); + void *ret = g2h(env_cpu(env), addr); set_helper_retaddr(retaddr); return ret; } diff --git a/bsd-user/elfload.c b/bsd-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/elfload.c +++ b/bsd-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void padzero(abi_ulong elf_bss, abi_ulong last_bss) end_addr1 = REAL_HOST_PAGE_ALIGN(elf_bss); end_addr = HOST_PAGE_ALIGN(elf_bss); if (end_addr1 < end_addr) { - mmap((void *)g2h(end_addr1), end_addr - end_addr1, + mmap((void *)g2h_untagged(end_addr1), end_addr - end_addr1, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_FIXED|MAP_PRIVATE|MAP_ANON, -1, 0); } diff --git a/bsd-user/main.c b/bsd-user/main.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/main.c +++ b/bsd-user/main.c @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) env->idt.base = target_mmap(0, sizeof(uint64_t) * (env->idt.limit + 1), PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); - idt_table = g2h(env->idt.base); + idt_table = g2h_untagged(env->idt.base); set_idt(0, 0); set_idt(1, 0); set_idt(2, 0); @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); env->gdt.limit = sizeof(uint64_t) * TARGET_GDT_ENTRIES - 1; - gdt_table = g2h(env->gdt.base); + gdt_table = g2h_untagged(env->gdt.base); #ifdef TARGET_ABI32 write_dt(&gdt_table[__USER_CS >> 3], 0, 0xfffff, DESC_G_MASK | DESC_B_MASK | DESC_P_MASK | DESC_S_MASK | diff --git a/bsd-user/mmap.c b/bsd-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/mmap.c +++ b/bsd-user/mmap.c @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int prot) } end = host_end; } - ret = mprotect(g2h(host_start), qemu_host_page_size, prot1 & PAGE_BITS); + ret = mprotect(g2h_untagged(host_start), + qemu_host_page_size, prot1 & PAGE_BITS); if (ret != 0) goto error; host_start += qemu_host_page_size; @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int prot) for(addr = end; addr < host_end; addr += TARGET_PAGE_SIZE) { prot1 |= page_get_flags(addr); } - ret = mprotect(g2h(host_end - qemu_host_page_size), qemu_host_page_size, - prot1 & PAGE_BITS); + ret = mprotect(g2h_untagged(host_end - qemu_host_page_size), + qemu_host_page_size, prot1 & PAGE_BITS); if (ret != 0) goto error; host_end -= qemu_host_page_size; @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int prot) /* handle the pages in the middle */ if (host_start < host_end) { - ret = mprotect(g2h(host_start), host_end - host_start, prot); + ret = mprotect(g2h_untagged(host_start), host_end - host_start, prot); if (ret != 0) goto error; } @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, int prot1, prot_new; real_end = real_start + qemu_host_page_size; - host_start = g2h(real_start); + host_start = g2h_untagged(real_start); /* get the protection of the target pages outside the mapping */ prot1 = 0; @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, mprotect(host_start, qemu_host_page_size, prot1 | PROT_WRITE); /* read the corresponding file data */ - pread(fd, g2h(start), end - start, offset); + pread(fd, g2h_untagged(start), end - start, offset); /* put final protection */ if (prot_new != (prot1 | PROT_WRITE)) @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int prot, /* Note: we prefer to control the mapping address. It is especially important if qemu_host_page_size > qemu_real_host_page_size */ - p = mmap(g2h(mmap_start), + p = mmap(g2h_untagged(mmap_start), host_len, prot, flags | MAP_FIXED, fd, host_offset); if (p == MAP_FAILED) goto fail; @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int prot, -1, 0); if (retaddr == -1) goto fail; - pread(fd, g2h(start), len, offset); + pread(fd, g2h_untagged(start), len, offset); if (!(prot & PROT_WRITE)) { ret = target_mprotect(start, len, prot); if (ret != 0) { @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int prot, offset1 = 0; else offset1 = offset + real_start - start; - p = mmap(g2h(real_start), real_end - real_start, + p = mmap(g2h_untagged(real_start), real_end - real_start, prot, flags, fd, offset1); if (p == MAP_FAILED) goto fail; @@ -XXX,XX +XXX,XX @@ int target_munmap(abi_ulong start, abi_ulong len) ret = 0; /* unmap what we can */ if (real_start < real_end) { - ret = munmap(g2h(real_start), real_end - real_start); + ret = munmap(g2h_untagged(real_start), real_end - real_start); } if (ret == 0) @@ -XXX,XX +XXX,XX @@ int target_msync(abi_ulong start, abi_ulong len, int flags) return 0; start &= qemu_host_page_mask; - return msync(g2h(start), end - start, flags); + return msync(g2h_untagged(start), end - start, flags); } diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ enum { static bool init_guest_commpage(void) { - void *want = g2h(ARM_COMMPAGE & -qemu_host_page_size); + void *want = g2h_untagged(ARM_COMMPAGE & -qemu_host_page_size); void *addr = mmap(want, qemu_host_page_size, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); @@ -XXX,XX +XXX,XX @@ static bool init_guest_commpage(void) } /* Set kernel helper versions; rest of page is 0. */ - __put_user(5, (uint32_t *)g2h(0xffff0ffcu)); + __put_user(5, (uint32_t *)g2h_untagged(0xffff0ffcu)); if (mprotect(addr, qemu_host_page_size, PROT_READ)) { perror("Protecting guest commpage"); @@ -XXX,XX +XXX,XX @@ static void zero_bss(abi_ulong elf_bss, abi_ulong last_bss, int prot) here is still actually needed. For now, continue with it, but merge it with the "normal" mmap that would allocate the bss. */ - host_start = (uintptr_t) g2h(elf_bss); - host_end = (uintptr_t) g2h(last_bss); + host_start = (uintptr_t) g2h_untagged(elf_bss); + host_end = (uintptr_t) g2h_untagged(last_bss); host_map_start = REAL_HOST_PAGE_ALIGN(host_start); if (host_map_start < host_end) { @@ -XXX,XX +XXX,XX @@ static void pgb_have_guest_base(const char *image_name, abi_ulong guest_loaddr, } /* Reserve the address space for the binary, or reserved_va. */ - test = g2h(guest_loaddr); + test = g2h_untagged(guest_loaddr); addr = mmap(test, guest_hiaddr - guest_loaddr, PROT_NONE, flags, -1, 0); if (test != addr) { pgb_fail_in_use(image_name); @@ -XXX,XX +XXX,XX @@ static void pgb_reserved_va(const char *image_name, abi_ulong guest_loaddr, /* Reserve the memory on the host. */ assert(guest_base != 0); - test = g2h(0); + test = g2h_untagged(0); addr = mmap(test, reserved_va, PROT_NONE, flags, -1, 0); if (addr == MAP_FAILED || addr != test) { error_report("Unable to reserve 0x%lx bytes of virtual address " diff --git a/linux-user/flatload.c b/linux-user/flatload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/flatload.c +++ b/linux-user/flatload.c @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, } /* zero the BSS. */ - memset(g2h(datapos + data_len), 0, bss_len); + memset(g2h_untagged(datapos + data_len), 0, bss_len); return 0; } diff --git a/linux-user/hppa/cpu_loop.c b/linux-user/hppa/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hppa/cpu_loop.c +++ b/linux-user/hppa/cpu_loop.c @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) { + CPUState *cs = env_cpu(env); uint32_t which = env->gr[20]; abi_ulong addr = env->gr[26]; abi_ulong old = env->gr[25]; @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) } old = tswap32(old); new = tswap32(new); - ret = qatomic_cmpxchg((uint32_t *)g2h(addr), old, new); + ret = qatomic_cmpxchg((uint32_t *)g2h(cs, addr), old, new); ret = tswap32(ret); break; @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) can be host-endian as well. */ switch (size) { case 0: - old = *(uint8_t *)g2h(old); - new = *(uint8_t *)g2h(new); - ret = qatomic_cmpxchg((uint8_t *)g2h(addr), old, new); + old = *(uint8_t *)g2h(cs, old); + new = *(uint8_t *)g2h(cs, new); + ret = qatomic_cmpxchg((uint8_t *)g2h(cs, addr), old, new); ret = ret != old; break; case 1: - old = *(uint16_t *)g2h(old); - new = *(uint16_t *)g2h(new); - ret = qatomic_cmpxchg((uint16_t *)g2h(addr), old, new); + old = *(uint16_t *)g2h(cs, old); + new = *(uint16_t *)g2h(cs, new); + ret = qatomic_cmpxchg((uint16_t *)g2h(cs, addr), old, new); ret = ret != old; break; case 2: - old = *(uint32_t *)g2h(old); - new = *(uint32_t *)g2h(new); - ret = qatomic_cmpxchg((uint32_t *)g2h(addr), old, new); + old = *(uint32_t *)g2h(cs, old); + new = *(uint32_t *)g2h(cs, new); + ret = qatomic_cmpxchg((uint32_t *)g2h(cs, addr), old, new); ret = ret != old; break; case 3: { uint64_t o64, n64, r64; - o64 = *(uint64_t *)g2h(old); - n64 = *(uint64_t *)g2h(new); + o64 = *(uint64_t *)g2h(cs, old); + n64 = *(uint64_t *)g2h(cs, new); #ifdef CONFIG_ATOMIC64 - r64 = qatomic_cmpxchg__nocheck((uint64_t *)g2h(addr), + r64 = qatomic_cmpxchg__nocheck((uint64_t *)g2h(cs, addr), o64, n64); ret = r64 != o64; #else start_exclusive(); - r64 = *(uint64_t *)g2h(addr); + r64 = *(uint64_t *)g2h(cs, addr); ret = 1; if (r64 == o64) { - *(uint64_t *)g2h(addr) = n64; + *(uint64_t *)g2h(cs, addr) = n64; ret = 0; } end_exclusive(); diff --git a/linux-user/i386/cpu_loop.c b/linux-user/i386/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/i386/cpu_loop.c +++ b/linux-user/i386/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) env->idt.base = target_mmap(0, sizeof(uint64_t) * (env->idt.limit + 1), PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); - idt_table = g2h(env->idt.base); + idt_table = g2h_untagged(env->idt.base); set_idt(0, 0); set_idt(1, 0); set_idt(2, 0); @@ -XXX,XX +XXX,XX @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); env->gdt.limit = sizeof(uint64_t) * TARGET_GDT_ENTRIES - 1; - gdt_table = g2h(env->gdt.base); + gdt_table = g2h_untagged(env->gdt.base); #ifdef TARGET_ABI32 write_dt(&gdt_table[__USER_CS >> 3], 0, 0xfffff, DESC_G_MASK | DESC_B_MASK | DESC_P_MASK | DESC_S_MASK | diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int target_prot) } end = host_end; } - ret = mprotect(g2h(host_start), qemu_host_page_size, + ret = mprotect(g2h_untagged(host_start), qemu_host_page_size, prot1 & PAGE_BITS); if (ret != 0) { goto error; @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int target_prot) for (addr = end; addr < host_end; addr += TARGET_PAGE_SIZE) { prot1 |= page_get_flags(addr); } - ret = mprotect(g2h(host_end - qemu_host_page_size), + ret = mprotect(g2h_untagged(host_end - qemu_host_page_size), qemu_host_page_size, prot1 & PAGE_BITS); if (ret != 0) { goto error; @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int target_prot) /* handle the pages in the middle */ if (host_start < host_end) { - ret = mprotect(g2h(host_start), host_end - host_start, host_prot); + ret = mprotect(g2h_untagged(host_start), + host_end - host_start, host_prot); if (ret != 0) { goto error; } @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, int prot1, prot_new; real_end = real_start + qemu_host_page_size; - host_start = g2h(real_start); + host_start = g2h_untagged(real_start); /* get the protection of the target pages outside the mapping */ prot1 = 0; @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, mprotect(host_start, qemu_host_page_size, prot1 | PROT_WRITE); /* read the corresponding file data */ - if (pread(fd, g2h(start), end - start, offset) == -1) + if (pread(fd, g2h_untagged(start), end - start, offset) == -1) return -1; /* put final protection */ @@ -XXX,XX +XXX,XX @@ static int mmap_frag(abi_ulong real_start, mprotect(host_start, qemu_host_page_size, prot_new); } if (prot_new & PROT_WRITE) { - memset(g2h(start), 0, end - start); + memset(g2h_untagged(start), 0, end - start); } } return 0; @@ -XXX,XX +XXX,XX @@ abi_ulong mmap_find_vma(abi_ulong start, abi_ulong size, abi_ulong align) * - mremap() with MREMAP_FIXED flag * - shmat() with SHM_REMAP flag */ - ptr = mmap(g2h(addr), size, PROT_NONE, + ptr = mmap(g2h_untagged(addr), size, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE|MAP_NORESERVE, -1, 0); /* ENOMEM, if host address space has no memory */ @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, /* Note: we prefer to control the mapping address. It is especially important if qemu_host_page_size > qemu_real_host_page_size */ - p = mmap(g2h(start), host_len, host_prot, + p = mmap(g2h_untagged(start), host_len, host_prot, flags | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (p == MAP_FAILED) { goto fail; @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, /* update start so that it points to the file position at 'offset' */ host_start = (unsigned long)p; if (!(flags & MAP_ANONYMOUS)) { - p = mmap(g2h(start), len, host_prot, + p = mmap(g2h_untagged(start), len, host_prot, flags | MAP_FIXED, fd, host_offset); if (p == MAP_FAILED) { - munmap(g2h(start), host_len); + munmap(g2h_untagged(start), host_len); goto fail; } host_start += offset - host_offset; @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, -1, 0); if (retaddr == -1) goto fail; - if (pread(fd, g2h(start), len, offset) == -1) + if (pread(fd, g2h_untagged(start), len, offset) == -1) goto fail; if (!(host_prot & PROT_WRITE)) { ret = target_mprotect(start, len, target_prot); @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, offset1 = 0; else offset1 = offset + real_start - start; - p = mmap(g2h(real_start), real_end - real_start, + p = mmap(g2h_untagged(real_start), real_end - real_start, host_prot, flags, fd, offset1); if (p == MAP_FAILED) goto fail; @@ -XXX,XX +XXX,XX @@ static void mmap_reserve(abi_ulong start, abi_ulong size) real_end -= qemu_host_page_size; } if (real_start != real_end) { - mmap(g2h(real_start), real_end - real_start, PROT_NONE, + mmap(g2h_untagged(real_start), real_end - real_start, PROT_NONE, MAP_FIXED | MAP_ANONYMOUS | MAP_PRIVATE | MAP_NORESERVE, -1, 0); } @@ -XXX,XX +XXX,XX @@ int target_munmap(abi_ulong start, abi_ulong len) if (reserved_va) { mmap_reserve(real_start, real_end - real_start); } else { - ret = munmap(g2h(real_start), real_end - real_start); + ret = munmap(g2h_untagged(real_start), real_end - real_start); } } @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, mmap_lock(); if (flags & MREMAP_FIXED) { - host_addr = mremap(g2h(old_addr), old_size, new_size, - flags, g2h(new_addr)); + host_addr = mremap(g2h_untagged(old_addr), old_size, new_size, + flags, g2h_untagged(new_addr)); if (reserved_va && host_addr != MAP_FAILED) { /* If new and old addresses overlap then the above mremap will @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, errno = ENOMEM; host_addr = MAP_FAILED; } else { - host_addr = mremap(g2h(old_addr), old_size, new_size, - flags | MREMAP_FIXED, g2h(mmap_start)); + host_addr = mremap(g2h_untagged(old_addr), old_size, new_size, + flags | MREMAP_FIXED, + g2h_untagged(mmap_start)); if (reserved_va) { mmap_reserve(old_addr, old_size); } @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, } } if (prot == 0) { - host_addr = mremap(g2h(old_addr), old_size, new_size, flags); + host_addr = mremap(g2h_untagged(old_addr), + old_size, new_size, flags); if (host_addr != MAP_FAILED) { /* Check if address fits target address space */ if (!guest_range_valid(h2g(host_addr), new_size)) { /* Revert mremap() changes */ - host_addr = mremap(g2h(old_addr), new_size, old_size, - flags); + host_addr = mremap(g2h_untagged(old_addr), + new_size, old_size, flags); errno = ENOMEM; host_addr = MAP_FAILED; } else if (reserved_va && old_size > new_size) { diff --git a/linux-user/ppc/signal.c b/linux-user/ppc/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/ppc/signal.c +++ b/linux-user/ppc/signal.c @@ -XXX,XX +XXX,XX @@ static void restore_user_regs(CPUPPCState *env, uint64_t v_addr; /* 64-bit needs to recover the pointer to the vectors from the frame */ __get_user(v_addr, &frame->v_regs); - v_regs = g2h(v_addr); + v_regs = g2h(env_cpu(env), v_addr); #else v_regs = (ppc_avr_t *)frame->mc_vregs.altivec; #endif @@ -XXX,XX +XXX,XX @@ void setup_rt_frame(int sig, struct target_sigaction *ka, if (get_ppc64_abi(image) < 2) { /* ELFv1 PPC64 function pointers are pointers to OPD entries. */ struct target_func_ptr *handler = - (struct target_func_ptr *)g2h(ka->_sa_handler); + (struct target_func_ptr *)g2h(env_cpu(env), ka->_sa_handler); env->nip = tswapl(handler->entry); env->gpr[2] = tswapl(handler->toc); } else { diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_brk(abi_ulong new_brk) /* Heap contents are initialized to zero, as for anonymous * mapped pages. */ if (new_brk > target_brk) { - memset(g2h(target_brk), 0, new_brk - target_brk); + memset(g2h_untagged(target_brk), 0, new_brk - target_brk); } target_brk = new_brk; DEBUGF_BRK(TARGET_ABI_FMT_lx " (new_brk <= brk_page)\n", target_brk); @@ -XXX,XX +XXX,XX @@ abi_long do_brk(abi_ulong new_brk) * come from the remaining part of the previous page: it may * contains garbage data due to a previous heap usage (grown * then shrunken). */ - memset(g2h(target_brk), 0, brk_page - target_brk); + memset(g2h_untagged(target_brk), 0, brk_page - target_brk); target_brk = new_brk; brk_page = HOST_PAGE_ALIGN(target_brk); @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, mmap_lock(); if (shmaddr) - host_raddr = shmat(shmid, (void *)g2h(shmaddr), shmflg); + host_raddr = shmat(shmid, (void *)g2h_untagged(shmaddr), shmflg); else { abi_ulong mmap_start; @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, errno = ENOMEM; host_raddr = (void *)-1; } else - host_raddr = shmat(shmid, g2h(mmap_start), shmflg | SHM_REMAP); + host_raddr = shmat(shmid, g2h_untagged(mmap_start), + shmflg | SHM_REMAP); } if (host_raddr == (void *)-1) { @@ -XXX,XX +XXX,XX @@ static inline abi_long do_shmdt(abi_ulong shmaddr) break; } } - rv = get_errno(shmdt(g2h(shmaddr))); + rv = get_errno(shmdt(g2h_untagged(shmaddr))); mmap_unlock(); @@ -XXX,XX +XXX,XX @@ static abi_long write_ldt(CPUX86State *env, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (env->ldt.base == -1) return -TARGET_ENOMEM; - memset(g2h(env->ldt.base), 0, + memset(g2h_untagged(env->ldt.base), 0, TARGET_LDT_ENTRIES * TARGET_LDT_ENTRY_SIZE); env->ldt.limit = 0xffff; - ldt_table = g2h(env->ldt.base); + ldt_table = g2h_untagged(env->ldt.base); } /* NOTE: same code as Linux kernel */ @@ -XXX,XX +XXX,XX @@ static abi_long do_modify_ldt(CPUX86State *env, int func, abi_ulong ptr, #if defined(TARGET_ABI32) abi_long do_set_thread_area(CPUX86State *env, abi_ulong ptr) { - uint64_t *gdt_table = g2h(env->gdt.base); + uint64_t *gdt_table = g2h_untagged(env->gdt.base); struct target_modify_ldt_ldt_s ldt_info; struct target_modify_ldt_ldt_s *target_ldt_info; int seg_32bit, contents, read_exec_only, limit_in_pages; @@ -XXX,XX +XXX,XX @@ install: static abi_long do_get_thread_area(CPUX86State *env, abi_ulong ptr) { struct target_modify_ldt_ldt_s *target_ldt_info; - uint64_t *gdt_table = g2h(env->gdt.base); + uint64_t *gdt_table = g2h_untagged(env->gdt.base); uint32_t base_addr, limit, flags; int seg_32bit, contents, read_exec_only, limit_in_pages, idx; int seg_not_present, useable, lm; @@ -XXX,XX +XXX,XX @@ static int do_safe_futex(int *uaddr, int op, int val, tricky. However they're probably useless because guest atomic operations won't work either. */ #if defined(TARGET_NR_futex) -static int do_futex(target_ulong uaddr, int op, int val, target_ulong timeout, - target_ulong uaddr2, int val3) +static int do_futex(CPUState *cpu, target_ulong uaddr, int op, int val, + target_ulong timeout, target_ulong uaddr2, int val3) { struct timespec ts, *pts; int base_op; @@ -XXX,XX +XXX,XX @@ static int do_futex(target_ulong uaddr, int op, int val, target_ulong timeout, } else { pts = NULL; } - return do_safe_futex(g2h(uaddr), op, tswap32(val), pts, NULL, val3); + return do_safe_futex(g2h(cpu, uaddr), + op, tswap32(val), pts, NULL, val3); case FUTEX_WAKE: - return do_safe_futex(g2h(uaddr), op, val, NULL, NULL, 0); + return do_safe_futex(g2h(cpu, uaddr), + op, val, NULL, NULL, 0); case FUTEX_FD: - return do_safe_futex(g2h(uaddr), op, val, NULL, NULL, 0); + return do_safe_futex(g2h(cpu, uaddr), + op, val, NULL, NULL, 0); case FUTEX_REQUEUE: case FUTEX_CMP_REQUEUE: case FUTEX_WAKE_OP: @@ -XXX,XX +XXX,XX @@ static int do_futex(target_ulong uaddr, int op, int val, target_ulong timeout, to satisfy the compiler. We do not need to tswap TIMEOUT since it's not compared to guest memory. */ pts = (struct timespec *)(uintptr_t) timeout; - return do_safe_futex(g2h(uaddr), op, val, pts, g2h(uaddr2), + return do_safe_futex(g2h(cpu, uaddr), op, val, pts, g2h(cpu, uaddr2), (base_op == FUTEX_CMP_REQUEUE - ? tswap32(val3) - : val3)); + ? tswap32(val3) : val3)); default: return -TARGET_ENOSYS; } @@ -XXX,XX +XXX,XX @@ static int do_futex(target_ulong uaddr, int op, int val, target_ulong timeout, #endif #if defined(TARGET_NR_futex_time64) -static int do_futex_time64(target_ulong uaddr, int op, int val, target_ulong timeout, +static int do_futex_time64(CPUState *cpu, target_ulong uaddr, int op, + int val, target_ulong timeout, target_ulong uaddr2, int val3) { struct timespec ts, *pts; @@ -XXX,XX +XXX,XX @@ static int do_futex_time64(target_ulong uaddr, int op, int val, target_ulong tim } else { pts = NULL; } - return do_safe_futex(g2h(uaddr), op, tswap32(val), pts, NULL, val3); + return do_safe_futex(g2h(cpu, uaddr), op, + tswap32(val), pts, NULL, val3); case FUTEX_WAKE: - return do_safe_futex(g2h(uaddr), op, val, NULL, NULL, 0); + return do_safe_futex(g2h(cpu, uaddr), op, val, NULL, NULL, 0); case FUTEX_FD: - return do_safe_futex(g2h(uaddr), op, val, NULL, NULL, 0); + return do_safe_futex(g2h(cpu, uaddr), op, val, NULL, NULL, 0); case FUTEX_REQUEUE: case FUTEX_CMP_REQUEUE: case FUTEX_WAKE_OP: @@ -XXX,XX +XXX,XX @@ static int do_futex_time64(target_ulong uaddr, int op, int val, target_ulong tim to satisfy the compiler. We do not need to tswap TIMEOUT since it's not compared to guest memory. */ pts = (struct timespec *)(uintptr_t) timeout; - return do_safe_futex(g2h(uaddr), op, val, pts, g2h(uaddr2), + return do_safe_futex(g2h(cpu, uaddr), op, val, pts, g2h(cpu, uaddr2), (base_op == FUTEX_CMP_REQUEUE - ? tswap32(val3) - : val3)); + ? tswap32(val3) : val3)); default: return -TARGET_ENOSYS; } @@ -XXX,XX +XXX,XX @@ static int open_self_maps(void *cpu_env, int fd) const char *path; max = h2g_valid(max - 1) ? - max : (uintptr_t) g2h(GUEST_ADDR_MAX) + 1; + max : (uintptr_t) g2h_untagged(GUEST_ADDR_MAX) + 1; if (page_check_range(h2g(min), max - min, flags) == -1) { continue; @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, if (ts->child_tidptr) { put_user_u32(0, ts->child_tidptr); - do_sys_futex(g2h(ts->child_tidptr), FUTEX_WAKE, INT_MAX, - NULL, NULL, 0); + do_sys_futex(g2h(cpu, ts->child_tidptr), + FUTEX_WAKE, INT_MAX, NULL, NULL, 0); } thread_cpu = NULL; g_free(ts); @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, if (!arg5) { ret = mount(p, p2, p3, (unsigned long)arg4, NULL); } else { - ret = mount(p, p2, p3, (unsigned long)arg4, g2h(arg5)); + ret = mount(p, p2, p3, (unsigned long)arg4, g2h(cpu, arg5)); } ret = get_errno(ret); @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, /* ??? msync/mlock/munlock are broken for softmmu. */ #ifdef TARGET_NR_msync case TARGET_NR_msync: - return get_errno(msync(g2h(arg1), arg2, arg3)); + return get_errno(msync(g2h(cpu, arg1), arg2, arg3)); #endif #ifdef TARGET_NR_mlock case TARGET_NR_mlock: - return get_errno(mlock(g2h(arg1), arg2)); + return get_errno(mlock(g2h(cpu, arg1), arg2)); #endif #ifdef TARGET_NR_munlock case TARGET_NR_munlock: - return get_errno(munlock(g2h(arg1), arg2)); + return get_errno(munlock(g2h(cpu, arg1), arg2)); #endif #ifdef TARGET_NR_mlockall case TARGET_NR_mlockall: @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, #if defined(TARGET_NR_set_tid_address) && defined(__NR_set_tid_address) case TARGET_NR_set_tid_address: - return get_errno(set_tid_address((int *)g2h(arg1))); + return get_errno(set_tid_address((int *)g2h(cpu, arg1))); #endif case TARGET_NR_tkill: @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, #endif #ifdef TARGET_NR_futex case TARGET_NR_futex: - return do_futex(arg1, arg2, arg3, arg4, arg5, arg6); + return do_futex(cpu, arg1, arg2, arg3, arg4, arg5, arg6); #endif #ifdef TARGET_NR_futex_time64 case TARGET_NR_futex_time64: - return do_futex_time64(arg1, arg2, arg3, arg4, arg5, arg6); + return do_futex_time64(cpu, arg1, arg2, arg3, arg4, arg5, arg6); #endif #if defined(TARGET_NR_inotify_init) && defined(__NR_inotify_init) case TARGET_NR_inotify_init: diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(paired_cmpxchg64_le)(CPUARMState *env, uint64_t addr, #ifdef CONFIG_USER_ONLY /* ??? Enforce alignment. */ - uint64_t *haddr = g2h(addr); + uint64_t *haddr = g2h(env_cpu(env), addr); set_helper_retaddr(ra); o0 = ldq_le_p(haddr + 0); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(paired_cmpxchg64_be)(CPUARMState *env, uint64_t addr, #ifdef CONFIG_USER_ONLY /* ??? Enforce alignment. */ - uint64_t *haddr = g2h(addr); + uint64_t *haddr = g2h(env_cpu(env), addr); set_helper_retaddr(ra); o1 = ldq_be_p(haddr + 0); diff --git a/target/hppa/op_helper.c b/target/hppa/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/op_helper.c +++ b/target/hppa/op_helper.c @@ -XXX,XX +XXX,XX @@ static void atomic_store_3(CPUHPPAState *env, target_ulong addr, uint32_t val, #ifdef CONFIG_USER_ONLY uint32_t old, new, cmp; - uint32_t *haddr = g2h(addr - 1); + uint32_t *haddr = g2h(env_cpu(env), addr - 1); old = *haddr; while (1) { new = (old & ~mask) | (val & mask); diff --git a/target/i386/tcg/mem_helper.c b/target/i386/tcg/mem_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/mem_helper.c +++ b/target/i386/tcg/mem_helper.c @@ -XXX,XX +XXX,XX @@ void helper_cmpxchg8b(CPUX86State *env, target_ulong a0) #ifdef CONFIG_USER_ONLY { - uint64_t *haddr = g2h(a0); + uint64_t *haddr = g2h(env_cpu(env), a0); cmpv = cpu_to_le64(cmpv); newv = cpu_to_le64(newv); oldv = qatomic_cmpxchg__nocheck(haddr, cmpv, newv); diff --git a/target/s390x/mem_helper.c b/target/s390x/mem_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/mem_helper.c +++ b/target/s390x/mem_helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t do_csst(CPUS390XState *env, uint32_t r3, uint64_t a1, if (parallel) { #ifdef CONFIG_USER_ONLY - uint32_t *haddr = g2h(a1); + uint32_t *haddr = g2h(env_cpu(env), a1); ov = qatomic_cmpxchg__nocheck(haddr, cv, nv); #else TCGMemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mem_idx); @@ -XXX,XX +XXX,XX @@ static uint32_t do_csst(CPUS390XState *env, uint32_t r3, uint64_t a1, if (parallel) { #ifdef CONFIG_ATOMIC64 # ifdef CONFIG_USER_ONLY - uint64_t *haddr = g2h(a1); + uint64_t *haddr = g2h(env_cpu(env), a1); ov = qatomic_cmpxchg__nocheck(haddr, cv, nv); # else TCGMemOpIdx oi = make_memop_idx(MO_TEQ | MO_ALIGN, mem_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We define target_mmap et al as untagged, so that they can be used from the binary loaders. Explicitly call cpu_untagged_addr for munmap, mprotect, mremap syscall entry points. Add a few comments for the syscalls that are exempted by the kernel's tagged-address-abi.rst. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/syscall.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_brk(abi_ulong new_brk) abi_long mapped_addr; abi_ulong new_alloc_size; + /* brk pointers are always untagged */ + DEBUGF_BRK("do_brk(" TARGET_ABI_FMT_lx ") -> ", new_brk); if (!new_brk) { @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, int i,ret; abi_ulong shmlba; + /* shmat pointers are always untagged */ + /* find out the length of the shared memory segment */ ret = get_errno(shmctl(shmid, IPC_STAT, &shm_info)); if (is_error(ret)) { @@ -XXX,XX +XXX,XX @@ static inline abi_long do_shmdt(abi_ulong shmaddr) int i; abi_long rv; + /* shmdt pointers are always untagged */ + mmap_lock(); for (i = 0; i < N_SHM_REGIONS; ++i) { @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, v5, v6)); } #else + /* mmap pointers are always untagged */ ret = get_errno(target_mmap(arg1, arg2, arg3, target_to_host_bitmask(arg4, mmap_flags_tbl), arg5, @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, return get_errno(ret); #endif case TARGET_NR_munmap: + arg1 = cpu_untagged_addr(cpu, arg1); return get_errno(target_munmap(arg1, arg2)); case TARGET_NR_mprotect: + arg1 = cpu_untagged_addr(cpu, arg1); { TaskState *ts = cpu->opaque; /* Special hack to detect libc making the stack executable. */ @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, return get_errno(target_mprotect(arg1, arg2, arg3)); #ifdef TARGET_NR_mremap case TARGET_NR_mremap: + arg1 = cpu_untagged_addr(cpu, arg1); + /* mremap new_addr (arg5) is always untagged */ return get_errno(target_mremap(arg1, arg2, arg3, arg4, arg5)); #endif /* ??? msync/mlock/munlock are broken for softmmu. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We're currently open-coding the range check in access_ok; use guest_range_valid when size != 0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { - if (!guest_addr_valid(addr)) { - return false; - } - if (size != 0 && - (addr + size - 1 < addr || - !guest_addr_valid(addr + size - 1))) { + if (size == 0 + ? !guest_addr_valid(addr) + : !guest_range_valid(addr, size)) { return false; } return page_check_range((target_ulong)addr, size, type) == 0; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The places that use these are better off using untagged addresses, so do not provide a tagged versions. Rename to make it clear about the address type. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu_ldst.h | 4 ++-- linux-user/qemu.h | 4 ++-- accel/tcg/user-exec.c | 3 ++- linux-user/mmap.c | 14 +++++++------- linux-user/syscall.c | 2 +- 5 files changed, 14 insertions(+), 13 deletions(-) diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -XXX,XX +XXX,XX @@ static inline void *g2h(CPUState *cs, abi_ptr x) return g2h_untagged(cpu_untagged_addr(cs, x)); } -static inline bool guest_addr_valid(abi_ulong x) +static inline bool guest_addr_valid_untagged(abi_ulong x) { return x <= GUEST_ADDR_MAX; } -static inline bool guest_range_valid(abi_ulong start, abi_ulong len) +static inline bool guest_range_valid_untagged(abi_ulong start, abi_ulong len) { return len - 1 <= GUEST_ADDR_MAX && start <= GUEST_ADDR_MAX - len + 1; } diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) { if (size == 0 - ? !guest_addr_valid(addr) - : !guest_range_valid(addr, size)) { + ? !guest_addr_valid_untagged(addr) + : !guest_range_valid_untagged(addr, size)) { return false; } return page_check_range((target_ulong)addr, size, type) == 0; diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/user-exec.c +++ b/accel/tcg/user-exec.c @@ -XXX,XX +XXX,XX @@ static int probe_access_internal(CPUArchState *env, target_ulong addr, g_assert_not_reached(); } - if (!guest_addr_valid(addr) || page_check_range(addr, 1, flags) < 0) { + if (!guest_addr_valid_untagged(addr) || + page_check_range(addr, 1, flags) < 0) { if (nonfault) { return TLB_INVALID_MASK; } else { diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ int target_mprotect(abi_ulong start, abi_ulong len, int target_prot) } len = TARGET_PAGE_ALIGN(len); end = start + len; - if (!guest_range_valid(start, len)) { + if (!guest_range_valid_untagged(start, len)) { return -TARGET_ENOMEM; } if (len == 0) { @@ -XXX,XX +XXX,XX @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot, * It can fail only on 64-bit host with 32-bit target. * On any other target/host host mmap() handles this error correctly. */ - if (end < start || !guest_range_valid(start, len)) { + if (end < start || !guest_range_valid_untagged(start, len)) { errno = ENOMEM; goto fail; } @@ -XXX,XX +XXX,XX @@ int target_munmap(abi_ulong start, abi_ulong len) if (start & ~TARGET_PAGE_MASK) return -TARGET_EINVAL; len = TARGET_PAGE_ALIGN(len); - if (len == 0 || !guest_range_valid(start, len)) { + if (len == 0 || !guest_range_valid_untagged(start, len)) { return -TARGET_EINVAL; } @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, int prot; void *host_addr; - if (!guest_range_valid(old_addr, old_size) || + if (!guest_range_valid_untagged(old_addr, old_size) || ((flags & MREMAP_FIXED) && - !guest_range_valid(new_addr, new_size)) || + !guest_range_valid_untagged(new_addr, new_size)) || ((flags & MREMAP_MAYMOVE) == 0 && - !guest_range_valid(old_addr, new_size))) { + !guest_range_valid_untagged(old_addr, new_size))) { errno = ENOMEM; return -1; } @@ -XXX,XX +XXX,XX @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, if (host_addr != MAP_FAILED) { /* Check if address fits target address space */ - if (!guest_range_valid(h2g(host_addr), new_size)) { + if (!guest_range_valid_untagged(h2g(host_addr), new_size)) { /* Revert mremap() changes */ host_addr = mremap(g2h_untagged(old_addr), new_size, old_size, flags); diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, return -TARGET_EINVAL; } } - if (!guest_range_valid(shmaddr, shm_info.shm_segsz)) { + if (!guest_range_valid_untagged(shmaddr, shm_info.shm_segsz)) { return -TARGET_EINVAL; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Provide both tagged and untagged versions of access_ok. In a few places use thread_cpu, as the user is several callees removed from do_syscall1. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 11 +++++++++-- linux-user/elfload.c | 2 +- linux-user/hppa/cpu_loop.c | 8 ++++---- linux-user/i386/cpu_loop.c | 2 +- linux-user/i386/signal.c | 5 +++-- linux-user/syscall.c | 9 ++++++--- 6 files changed, 24 insertions(+), 13 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ extern unsigned long guest_stack_size; #define VERIFY_READ PAGE_READ #define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) -static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) +static inline bool access_ok_untagged(int type, abi_ulong addr, abi_ulong size) { if (size == 0 ? !guest_addr_valid_untagged(addr) @@ -XXX,XX +XXX,XX @@ static inline bool access_ok(int type, abi_ulong addr, abi_ulong size) return page_check_range((target_ulong)addr, size, type) == 0; } +static inline bool access_ok(CPUState *cpu, int type, + abi_ulong addr, abi_ulong size) +{ + return access_ok_untagged(type, cpu_untagged_addr(cpu, addr), size); +} + /* NOTE __get_user and __put_user use host pointers and don't check access. These are usually used to access struct data members once the struct has been locked - usually with lock_user_struct. */ @@ -XXX,XX +XXX,XX @@ abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); host area will have the same contents as the guest. */ static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy) { - if (!access_ok(type, guest_addr, len)) + if (!access_ok_untagged(type, guest_addr, len)) { return NULL; + } #ifdef DEBUG_REMAP { void *addr; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static int vma_get_mapping_count(const struct mm_struct *mm) static abi_ulong vma_dump_size(const struct vm_area_struct *vma) { /* if we cannot even read the first page, skip it */ - if (!access_ok(VERIFY_READ, vma->vma_start, TARGET_PAGE_SIZE)) + if (!access_ok_untagged(VERIFY_READ, vma->vma_start, TARGET_PAGE_SIZE)) return (0); /* diff --git a/linux-user/hppa/cpu_loop.c b/linux-user/hppa/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hppa/cpu_loop.c +++ b/linux-user/hppa/cpu_loop.c @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) return -TARGET_ENOSYS; case 0: /* elf32 atomic 32bit cmpxchg */ - if ((addr & 3) || !access_ok(VERIFY_WRITE, addr, 4)) { + if ((addr & 3) || !access_ok(cs, VERIFY_WRITE, addr, 4)) { return -TARGET_EFAULT; } old = tswap32(old); @@ -XXX,XX +XXX,XX @@ static abi_ulong hppa_lws(CPUHPPAState *env) return -TARGET_ENOSYS; } if (((addr | old | new) & ((1 << size) - 1)) - || !access_ok(VERIFY_WRITE, addr, 1 << size) - || !access_ok(VERIFY_READ, old, 1 << size) - || !access_ok(VERIFY_READ, new, 1 << size)) { + || !access_ok(cs, VERIFY_WRITE, addr, 1 << size) + || !access_ok(cs, VERIFY_READ, old, 1 << size) + || !access_ok(cs, VERIFY_READ, new, 1 << size)) { return -TARGET_EFAULT; } /* Note that below we use host-endian loads so that the cmpxchg diff --git a/linux-user/i386/cpu_loop.c b/linux-user/i386/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/i386/cpu_loop.c +++ b/linux-user/i386/cpu_loop.c @@ -XXX,XX +XXX,XX @@ static bool write_ok_or_segv(CPUX86State *env, abi_ptr addr, size_t len) * For all the vsyscalls, NULL means "don't write anything" not * "write it at address 0". */ - if (addr == 0 || access_ok(VERIFY_WRITE, addr, len)) { + if (addr == 0 || access_ok(env_cpu(env), VERIFY_WRITE, addr, len)) { return true; } diff --git a/linux-user/i386/signal.c b/linux-user/i386/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/i386/signal.c +++ b/linux-user/i386/signal.c @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUX86State *env, struct target_sigcontext *sc) fpstate_addr = tswapl(sc->fpstate); if (fpstate_addr != 0) { - if (!access_ok(VERIFY_READ, fpstate_addr, - sizeof(struct target_fpstate))) + if (!access_ok(env_cpu(env), VERIFY_READ, fpstate_addr, + sizeof(struct target_fpstate))) { goto badframe; + } #ifndef TARGET_X86_64 cpu_x86_frstor(env, fpstate_addr, 1); #else diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_accept4(int fd, abi_ulong target_addr, return -TARGET_EINVAL; } - if (!access_ok(VERIFY_WRITE, target_addr, addrlen)) + if (!access_ok(thread_cpu, VERIFY_WRITE, target_addr, addrlen)) { return -TARGET_EFAULT; + } addr = alloca(addrlen); @@ -XXX,XX +XXX,XX @@ static abi_long do_getpeername(int fd, abi_ulong target_addr, return -TARGET_EINVAL; } - if (!access_ok(VERIFY_WRITE, target_addr, addrlen)) + if (!access_ok(thread_cpu, VERIFY_WRITE, target_addr, addrlen)) { return -TARGET_EFAULT; + } addr = alloca(addrlen); @@ -XXX,XX +XXX,XX @@ static abi_long do_getsockname(int fd, abi_ulong target_addr, return -TARGET_EINVAL; } - if (!access_ok(VERIFY_WRITE, target_addr, addrlen)) + if (!access_ok(thread_cpu, VERIFY_WRITE, target_addr, addrlen)) { return -TARGET_EFAULT; + } addr = alloca(addrlen); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These functions are not small, except for unlock_user without debugging enabled. Move them out of line, and add missing braces on the way. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-18-richard.henderson@linaro.org [PMM: fixed the sense of an ifdef test in qemu.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 47 +++++++------------------------------------- linux-user/uaccess.c | 46 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+), 40 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); /* Lock an area of guest memory into the host. If copy is true then the host area will have the same contents as the guest. */ -static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy) -{ - if (!access_ok_untagged(type, guest_addr, len)) { - return NULL; - } -#ifdef DEBUG_REMAP - { - void *addr; - addr = g_malloc(len); - if (copy) - memcpy(addr, g2h(guest_addr), len); - else - memset(addr, 0, len); - return addr; - } -#else - return g2h_untagged(guest_addr); -#endif -} +void *lock_user(int type, abi_ulong guest_addr, long len, int copy); /* Unlock an area of guest memory. The first LEN bytes must be flushed back to guest memory. host_ptr = NULL is explicitly allowed and does nothing. */ -static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, - long len) -{ - -#ifdef DEBUG_REMAP - if (!host_ptr) - return; - if (host_ptr == g2h_untagged(guest_addr)) - return; - if (len > 0) - memcpy(g2h_untagged(guest_addr), host_ptr, len); - g_free(host_ptr); +#ifndef DEBUG_REMAP +static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, long len) +{ } +#else +void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); #endif -} /* Return the length of a string in target memory or -TARGET_EFAULT if access error. */ abi_long target_strlen(abi_ulong gaddr); /* Like lock_user but for null terminated strings. */ -static inline void *lock_user_string(abi_ulong guest_addr) -{ - abi_long len; - len = target_strlen(guest_addr); - if (len < 0) - return NULL; - return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1); -} +void *lock_user_string(abi_ulong guest_addr); /* Helper macros for locking/unlocking a target struct. */ #define lock_user_struct(type, host_ptr, guest_addr, copy) \ diff --git a/linux-user/uaccess.c b/linux-user/uaccess.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/uaccess.c +++ b/linux-user/uaccess.c @@ -XXX,XX +XXX,XX @@ #include "qemu.h" +void *lock_user(int type, abi_ulong guest_addr, long len, int copy) +{ + if (!access_ok_untagged(type, guest_addr, len)) { + return NULL; + } +#ifdef DEBUG_REMAP + { + void *addr; + addr = g_malloc(len); + if (copy) { + memcpy(addr, g2h(guest_addr), len); + } else { + memset(addr, 0, len); + } + return addr; + } +#else + return g2h_untagged(guest_addr); +#endif +} + +#ifdef DEBUG_REMAP +void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); +{ + if (!host_ptr) { + return; + } + if (host_ptr == g2h_untagged(guest_addr)) { + return; + } + if (len > 0) { + memcpy(g2h_untagged(guest_addr), host_ptr, len); + } + g_free(host_ptr); +} +#endif + +void *lock_user_string(abi_ulong guest_addr) +{ + abi_long len = target_strlen(guest_addr); + if (len < 0) { + return NULL; + } + return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1); +} + /* copy_from_user() and copy_to_user() are usually used to copy data * buffers between the target and host. These internally perform * locking/unlocking of the memory. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> For copy_*_user, only 0 and -TARGET_EFAULT are returned; no need to involve abi_long. Use size_t for lengths. Use bool for the lock_user copy argument. Use ssize_t for target_strlen, because we can't overflow the host memory space. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-19-richard.henderson@linaro.org [PMM: moved fix for ifdef error to previous commit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 12 +++++------- linux-user/uaccess.c | 45 ++++++++++++++++++++++---------------------- 2 files changed, 28 insertions(+), 29 deletions(-) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #undef DEBUG_REMAP -#ifdef DEBUG_REMAP -#endif /* DEBUG_REMAP */ #include "exec/user/abitypes.h" @@ -XXX,XX +XXX,XX @@ static inline bool access_ok(CPUState *cpu, int type, * buffers between the target and host. These internally perform * locking/unlocking of the memory. */ -abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len); -abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); +int copy_from_user(void *hptr, abi_ulong gaddr, size_t len); +int copy_to_user(abi_ulong gaddr, void *hptr, size_t len); /* Functions for accessing guest memory. The tget and tput functions read/write single values, byteswapping as necessary. The lock_user function @@ -XXX,XX +XXX,XX @@ abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); /* Lock an area of guest memory into the host. If copy is true then the host area will have the same contents as the guest. */ -void *lock_user(int type, abi_ulong guest_addr, long len, int copy); +void *lock_user(int type, abi_ulong guest_addr, size_t len, bool copy); /* Unlock an area of guest memory. The first LEN bytes must be flushed back to guest memory. host_ptr = NULL is explicitly allowed and does nothing. */ #ifndef DEBUG_REMAP -static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, long len) +static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, size_t len) { } #else void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); @@ -XXX,XX +XXX,XX @@ void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); /* Return the length of a string in target memory or -TARGET_EFAULT if access error. */ -abi_long target_strlen(abi_ulong gaddr); +ssize_t target_strlen(abi_ulong gaddr); /* Like lock_user but for null terminated strings. */ void *lock_user_string(abi_ulong guest_addr); diff --git a/linux-user/uaccess.c b/linux-user/uaccess.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/uaccess.c +++ b/linux-user/uaccess.c @@ -XXX,XX +XXX,XX @@ #include "qemu.h" -void *lock_user(int type, abi_ulong guest_addr, long len, int copy) +void *lock_user(int type, abi_ulong guest_addr, size_t len, bool copy) { if (!access_ok_untagged(type, guest_addr, len)) { return NULL; @@ -XXX,XX +XXX,XX @@ void *lock_user(int type, abi_ulong guest_addr, long len, int copy) } #ifdef DEBUG_REMAP -void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); +void unlock_user(void *host_ptr, abi_ulong guest_addr, size_t len); { if (!host_ptr) { return; @@ -XXX,XX +XXX,XX @@ void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); if (host_ptr == g2h_untagged(guest_addr)) { return; } - if (len > 0) { + if (len != 0) { memcpy(g2h_untagged(guest_addr), host_ptr, len); } g_free(host_ptr); @@ -XXX,XX +XXX,XX @@ void unlock_user(void *host_ptr, abi_ulong guest_addr, long len); void *lock_user_string(abi_ulong guest_addr) { - abi_long len = target_strlen(guest_addr); + ssize_t len = target_strlen(guest_addr); if (len < 0) { return NULL; } - return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1); + return lock_user(VERIFY_READ, guest_addr, (size_t)len + 1, 1); } /* copy_from_user() and copy_to_user() are usually used to copy data * buffers between the target and host. These internally perform * locking/unlocking of the memory. */ -abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len) +int copy_from_user(void *hptr, abi_ulong gaddr, size_t len) { - abi_long ret = 0; - void *ghptr; + int ret = 0; + void *ghptr = lock_user(VERIFY_READ, gaddr, len, 1); - if ((ghptr = lock_user(VERIFY_READ, gaddr, len, 1))) { + if (ghptr) { memcpy(hptr, ghptr, len); unlock_user(ghptr, gaddr, 0); - } else + } else { ret = -TARGET_EFAULT; - + } return ret; } - -abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len) +int copy_to_user(abi_ulong gaddr, void *hptr, size_t len) { - abi_long ret = 0; - void *ghptr; + int ret = 0; + void *ghptr = lock_user(VERIFY_WRITE, gaddr, len, 0); - if ((ghptr = lock_user(VERIFY_WRITE, gaddr, len, 0))) { + if (ghptr) { memcpy(ghptr, hptr, len); unlock_user(ghptr, gaddr, len); - } else + } else { ret = -TARGET_EFAULT; + } return ret; } /* Return the length of a string in target memory or -TARGET_EFAULT if access error */ -abi_long target_strlen(abi_ulong guest_addr1) +ssize_t target_strlen(abi_ulong guest_addr1) { uint8_t *ptr; abi_ulong guest_addr; - int max_len, len; + size_t max_len, len; guest_addr = guest_addr1; for(;;) { @@ -XXX,XX +XXX,XX @@ abi_long target_strlen(abi_ulong guest_addr1) unlock_user(ptr, guest_addr, 0); guest_addr += len; /* we don't allow wrapping or integer overflow */ - if (guest_addr == 0 || - (guest_addr - guest_addr1) > 0x7fffffff) + if (guest_addr == 0 || (guest_addr - guest_addr1) > 0x7fffffff) { return -TARGET_EFAULT; - if (len != max_len) + } + if (len != max_len) { break; + } } return guest_addr - guest_addr1; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Resolve the untagged address once, using thread_cpu. Tidy the DEBUG_REMAP code using glib routines. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/uaccess.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/linux-user/uaccess.c b/linux-user/uaccess.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/uaccess.c +++ b/linux-user/uaccess.c @@ -XXX,XX +XXX,XX @@ void *lock_user(int type, abi_ulong guest_addr, size_t len, bool copy) { + void *host_addr; + + guest_addr = cpu_untagged_addr(thread_cpu, guest_addr); if (!access_ok_untagged(type, guest_addr, len)) { return NULL; } + host_addr = g2h_untagged(guest_addr); #ifdef DEBUG_REMAP - { - void *addr; - addr = g_malloc(len); - if (copy) { - memcpy(addr, g2h(guest_addr), len); - } else { - memset(addr, 0, len); - } - return addr; + if (copy) { + host_addr = g_memdup(host_addr, len); + } else { + host_addr = g_malloc0(len); } -#else - return g2h_untagged(guest_addr); #endif + return host_addr; } #ifdef DEBUG_REMAP void unlock_user(void *host_ptr, abi_ulong guest_addr, size_t len); { + void *host_ptr_conv; + if (!host_ptr) { return; } - if (host_ptr == g2h_untagged(guest_addr)) { + host_ptr_conv = g2h(thread_cpu, guest_addr); + if (host_ptr == host_ptr_conv) { return; } if (len != 0) { - memcpy(g2h_untagged(guest_addr), host_ptr, len); + memcpy(host_ptr_conv, host_ptr, len); } g_free(host_ptr); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the prctl bit that controls whether syscalls accept tagged addresses. See Documentation/arm64/tagged-address-abi.rst in the linux kernel. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_syscall.h | 4 ++++ target/arm/cpu-param.h | 3 +++ target/arm/cpu.h | 31 +++++++++++++++++++++++++++++ linux-user/syscall.c | 24 ++++++++++++++++++++++ 4 files changed, 62 insertions(+) diff --git a/linux-user/aarch64/target_syscall.h b/linux-user/aarch64/target_syscall.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_syscall.h +++ b/linux-user/aarch64/target_syscall.h @@ -XXX,XX +XXX,XX @@ struct target_pt_regs { # define TARGET_PR_PAC_APDBKEY (1 << 3) # define TARGET_PR_PAC_APGAKEY (1 << 4) +#define TARGET_PR_SET_TAGGED_ADDR_CTRL 55 +#define TARGET_PR_GET_TAGGED_ADDR_CTRL 56 +# define TARGET_PR_TAGGED_ADDR_ENABLE (1UL << 0) + #endif /* AARCH64_TARGET_SYSCALL_H */ diff --git a/target/arm/cpu-param.h b/target/arm/cpu-param.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-param.h +++ b/target/arm/cpu-param.h @@ -XXX,XX +XXX,XX @@ #ifdef CONFIG_USER_ONLY #define TARGET_PAGE_BITS 12 +# ifdef TARGET_AARCH64 +# define TARGET_TAGGED_ADDRESSES +# endif #else /* * ARMv7 and later CPUs have 4K pages minimum, but ARMv5 and v6 diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; + +#ifdef TARGET_TAGGED_ADDRESSES + /* Linux syscall tagged address support */ + bool tagged_addr_enable; +#endif } CPUARMState; static inline void set_feature(CPUARMState *env, int feature) @@ -XXX,XX +XXX,XX @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) */ #define PAGE_BTI PAGE_TARGET_1 +#ifdef TARGET_TAGGED_ADDRESSES +/** + * cpu_untagged_addr: + * @cs: CPU context + * @x: tagged address + * + * Remove any address tag from @x. This is explicitly related to the + * linux syscall TIF_TAGGED_ADDR setting, not TBI in general. + * + * There should be a better place to put this, but we need this in + * include/exec/cpu_ldst.h, and not some place linux-user specific. + */ +static inline target_ulong cpu_untagged_addr(CPUState *cs, target_ulong x) +{ + ARMCPU *cpu = ARM_CPU(cs); + if (cpu->env.tagged_addr_enable) { + /* + * TBI is enabled for userspace but not kernelspace addresses. + * Only clear the tag if bit 55 is clear. + */ + x &= sextract64(x, 0, 56); + } + return x; +} +#endif + /* * Naming convention for isar_feature functions: * Functions which test 32-bit ID registers should have _aa32_ in diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, } } return -TARGET_EINVAL; + case TARGET_PR_SET_TAGGED_ADDR_CTRL: + { + abi_ulong valid_mask = TARGET_PR_TAGGED_ADDR_ENABLE; + CPUARMState *env = cpu_env; + + if ((arg2 & ~valid_mask) || arg3 || arg4 || arg5) { + return -TARGET_EINVAL; + } + env->tagged_addr_enable = arg2 & TARGET_PR_TAGGED_ADDR_ENABLE; + return 0; + } + case TARGET_PR_GET_TAGGED_ADDR_CTRL: + { + abi_long ret = 0; + CPUARMState *env = cpu_env; + + if (arg2 || arg3 || arg4 || arg5) { + return -TARGET_EINVAL; + } + if (env->tagged_addr_enable) { + ret |= TARGET_PR_TAGGED_ADDR_ENABLE; + } + return ret; + } #endif /* AARCH64 */ case PR_GET_SECCOMP: case PR_SET_SECCOMP: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use simple arithmetic instead of a conditional move when tbi0 != tbi1. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_top_byte_ignore(DisasContext *s, TCGv_i64 dst, /* Sign-extend from bit 55. */ tcg_gen_sextract_i64(dst, src, 0, 56); - if (tbi != 3) { - TCGv_i64 tcg_zero = tcg_const_i64(0); - - /* - * The two TBI bits differ. - * If tbi0, then !tbi1: only use the extension if positive. - * if !tbi0, then tbi1: only use the extension if negative. - */ - tcg_gen_movcond_i64(tbi == 1 ? TCG_COND_GE : TCG_COND_LT, - dst, dst, tcg_zero, dst, src); - tcg_temp_free_i64(tcg_zero); + switch (tbi) { + case 1: + /* tbi0 but !tbi1: only use the extension if positive */ + tcg_gen_and_i64(dst, dst, src); + break; + case 2: + /* !tbi0 but tbi1: only use the extension if negative */ + tcg_gen_or_i64(dst, dst, src); + break; + case 3: + /* tbi0 and tbi1: always use the extension */ + break; + default: + g_assert_not_reached(); } } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We were fudging TBI1 enabled to speed up the generated code. Now that we've improved the code generation, remove this. Also, tidy the comment to reflect the current code. The pauth test was testing a kernel address (-1) and making incorrect assumptions about TBI1; stick to userland addresses. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 4 ++-- target/arm/cpu.c | 10 +++------- tests/tcg/aarch64/pauth-2.c | 1 - 3 files changed, 5 insertions(+), 10 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline bool tcma_check(uint32_t desc, int bit55, int ptr_tag) */ static inline uint64_t useronly_clean_ptr(uint64_t ptr) { - /* TBI is known to be enabled. */ #ifdef CONFIG_USER_ONLY - ptr = sextract64(ptr, 0, 56); + /* TBI0 is known to be enabled, while TBI1 is disabled. */ + ptr &= sextract64(ptr, 0, 56); #endif return ptr; } diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->vfp.zcr_el[1] = MIN(cpu->sve_max_vq - 1, 3); } /* - * Enable TBI0 and TBI1. While the real kernel only enables TBI0, - * turning on both here will produce smaller code and otherwise - * make no difference to the user-level emulation. - * - * In sve_probe_page, we assume that this is set. - * Do not modify this without other changes. + * Enable TBI0 but not TBI1. + * Note that this must match useronly_clean_ptr. */ - env->cp15.tcr_el[1].raw_tcr = (3ULL << 37); + env->cp15.tcr_el[1].raw_tcr = (1ULL << 37); #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/tests/tcg/aarch64/pauth-2.c b/tests/tcg/aarch64/pauth-2.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/pauth-2.c +++ b/tests/tcg/aarch64/pauth-2.c @@ -XXX,XX +XXX,XX @@ void do_test(uint64_t value) int main() { do_test(0); - do_test(-1); do_test(0xda004acedeadbeefull); return 0; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These prctl fields are required for the function of MTE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_syscall.h | 9 ++++++ linux-user/syscall.c | 43 +++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) diff --git a/linux-user/aarch64/target_syscall.h b/linux-user/aarch64/target_syscall.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_syscall.h +++ b/linux-user/aarch64/target_syscall.h @@ -XXX,XX +XXX,XX @@ struct target_pt_regs { #define TARGET_PR_SET_TAGGED_ADDR_CTRL 55 #define TARGET_PR_GET_TAGGED_ADDR_CTRL 56 # define TARGET_PR_TAGGED_ADDR_ENABLE (1UL << 0) +/* MTE tag check fault modes */ +# define TARGET_PR_MTE_TCF_SHIFT 1 +# define TARGET_PR_MTE_TCF_NONE (0UL << TARGET_PR_MTE_TCF_SHIFT) +# define TARGET_PR_MTE_TCF_SYNC (1UL << TARGET_PR_MTE_TCF_SHIFT) +# define TARGET_PR_MTE_TCF_ASYNC (2UL << TARGET_PR_MTE_TCF_SHIFT) +# define TARGET_PR_MTE_TCF_MASK (3UL << TARGET_PR_MTE_TCF_SHIFT) +/* MTE tag inclusion mask */ +# define TARGET_PR_MTE_TAG_SHIFT 3 +# define TARGET_PR_MTE_TAG_MASK (0xffffUL << TARGET_PR_MTE_TAG_SHIFT) #endif /* AARCH64_TARGET_SYSCALL_H */ diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, { abi_ulong valid_mask = TARGET_PR_TAGGED_ADDR_ENABLE; CPUARMState *env = cpu_env; + ARMCPU *cpu = env_archcpu(env); + + if (cpu_isar_feature(aa64_mte, cpu)) { + valid_mask |= TARGET_PR_MTE_TCF_MASK; + valid_mask |= TARGET_PR_MTE_TAG_MASK; + } if ((arg2 & ~valid_mask) || arg3 || arg4 || arg5) { return -TARGET_EINVAL; } env->tagged_addr_enable = arg2 & TARGET_PR_TAGGED_ADDR_ENABLE; + + if (cpu_isar_feature(aa64_mte, cpu)) { + switch (arg2 & TARGET_PR_MTE_TCF_MASK) { + case TARGET_PR_MTE_TCF_NONE: + case TARGET_PR_MTE_TCF_SYNC: + case TARGET_PR_MTE_TCF_ASYNC: + break; + default: + return -EINVAL; + } + + /* + * Write PR_MTE_TCF to SCTLR_EL1[TCF0]. + * Note that the syscall values are consistent with hw. + */ + env->cp15.sctlr_el[1] = + deposit64(env->cp15.sctlr_el[1], 38, 2, + arg2 >> TARGET_PR_MTE_TCF_SHIFT); + + /* + * Write PR_MTE_TAG to GCR_EL1[Exclude]. + * Note that the syscall uses an include mask, + * and hardware uses an exclude mask -- invert. + */ + env->cp15.gcr_el1 = + deposit64(env->cp15.gcr_el1, 0, 16, + ~arg2 >> TARGET_PR_MTE_TAG_SHIFT); + arm_rebuild_hflags(env); + } return 0; } case TARGET_PR_GET_TAGGED_ADDR_CTRL: { abi_long ret = 0; CPUARMState *env = cpu_env; + ARMCPU *cpu = env_archcpu(env); if (arg2 || arg3 || arg4 || arg5) { return -TARGET_EINVAL; @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, if (env->tagged_addr_enable) { ret |= TARGET_PR_TAGGED_ADDR_ENABLE; } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* See above. */ + ret |= (extract64(env->cp15.sctlr_el[1], 38, 2) + << TARGET_PR_MTE_TCF_SHIFT); + ret = deposit64(ret, TARGET_PR_MTE_TAG_SHIFT, 16, + ~env->cp15.gcr_el1); + } return ret; } #endif /* AARCH64 */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2. Otherwise this does not yet have effect. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 1 + linux-user/syscall_defs.h | 1 + target/arm/cpu.h | 1 + linux-user/mmap.c | 22 ++++++++++++++-------- 4 files changed, 17 insertions(+), 8 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; #endif /* Target-specific bits that will be used via page_get_flags(). */ #define PAGE_TARGET_1 0x0080 +#define PAGE_TARGET_2 0x0200 #if defined(CONFIG_USER_ONLY) void page_dump(FILE *f); diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall_defs.h +++ b/linux-user/syscall_defs.h @@ -XXX,XX +XXX,XX @@ struct target_winsize { #ifdef TARGET_AARCH64 #define TARGET_PROT_BTI 0x10 +#define TARGET_PROT_MTE 0x20 #endif /* Common */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) * AArch64 usage of the PAGE_TARGET_* bits for linux-user. */ #define PAGE_BTI PAGE_TARGET_1 +#define PAGE_MTE PAGE_TARGET_2 #ifdef TARGET_TAGGED_ADDRESSES /** diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ static int validate_prot_to_pageflags(int *host_prot, int prot) | (prot & PROT_EXEC ? PROT_READ : 0); #ifdef TARGET_AARCH64 - /* - * The PROT_BTI bit is only accepted if the cpu supports the feature. - * Since this is the unusual case, don't bother checking unless - * the bit has been requested. If set and valid, record the bit - * within QEMU's page_flags. - */ - if (prot & TARGET_PROT_BTI) { + { ARMCPU *cpu = ARM_CPU(thread_cpu); - if (cpu_isar_feature(aa64_bti, cpu)) { + + /* + * The PROT_BTI bit is only accepted if the cpu supports the feature. + * Since this is the unusual case, don't bother checking unless + * the bit has been requested. If set and valid, record the bit + * within QEMU's page_flags. + */ + if ((prot & TARGET_PROT_BTI) && cpu_isar_feature(aa64_bti, cpu)) { valid |= TARGET_PROT_BTI; page_flags |= PAGE_BTI; } + /* Similarly for the PROT_MTE bit. */ + if ((prot & TARGET_PROT_MTE) && cpu_isar_feature(aa64_mte, cpu)) { + valid |= TARGET_PROT_MTE; + page_flags |= PAGE_MTE; + } } #endif -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Move everything related to syndromes to a new file, which can be shared with linux-user. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 245 +----------------------------------- target/arm/syndrome.h | 273 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 274 insertions(+), 244 deletions(-) create mode 100644 target/arm/syndrome.h diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #define TARGET_ARM_INTERNALS_H #include "hw/registerfields.h" +#include "syndrome.h" /* register banks for CPU modes */ #define BANK_USRSYS 0 @@ -XXX,XX +XXX,XX @@ static inline bool extended_addresses_enabled(CPUARMState *env) (arm_feature(env, ARM_FEATURE_LPAE) && (tcr->raw_tcr & TTBCR_EAE)); } -/* Valid Syndrome Register EC field values */ -enum arm_exception_class { - EC_UNCATEGORIZED = 0x00, - EC_WFX_TRAP = 0x01, - EC_CP15RTTRAP = 0x03, - EC_CP15RRTTRAP = 0x04, - EC_CP14RTTRAP = 0x05, - EC_CP14DTTRAP = 0x06, - EC_ADVSIMDFPACCESSTRAP = 0x07, - EC_FPIDTRAP = 0x08, - EC_PACTRAP = 0x09, - EC_CP14RRTTRAP = 0x0c, - EC_BTITRAP = 0x0d, - EC_ILLEGALSTATE = 0x0e, - EC_AA32_SVC = 0x11, - EC_AA32_HVC = 0x12, - EC_AA32_SMC = 0x13, - EC_AA64_SVC = 0x15, - EC_AA64_HVC = 0x16, - EC_AA64_SMC = 0x17, - EC_SYSTEMREGISTERTRAP = 0x18, - EC_SVEACCESSTRAP = 0x19, - EC_INSNABORT = 0x20, - EC_INSNABORT_SAME_EL = 0x21, - EC_PCALIGNMENT = 0x22, - EC_DATAABORT = 0x24, - EC_DATAABORT_SAME_EL = 0x25, - EC_SPALIGNMENT = 0x26, - EC_AA32_FPTRAP = 0x28, - EC_AA64_FPTRAP = 0x2c, - EC_SERROR = 0x2f, - EC_BREAKPOINT = 0x30, - EC_BREAKPOINT_SAME_EL = 0x31, - EC_SOFTWARESTEP = 0x32, - EC_SOFTWARESTEP_SAME_EL = 0x33, - EC_WATCHPOINT = 0x34, - EC_WATCHPOINT_SAME_EL = 0x35, - EC_AA32_BKPT = 0x38, - EC_VECTORCATCH = 0x3a, - EC_AA64_BKPT = 0x3c, -}; - -#define ARM_EL_EC_SHIFT 26 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -static inline uint32_t syn_get_ec(uint32_t syn) -{ - return syn >> ARM_EL_EC_SHIFT; -} - -/* Utility functions for constructing various kinds of syndrome value. - * Note that in general we follow the AArch64 syndrome values; in a - * few cases the value in HSR for exceptions taken to AArch32 Hyp - * mode differs slightly, and we fix this up when populating HSR in - * arm_cpu_do_interrupt_aarch32_hyp(). - * The exception is FP/SIMD access traps -- these report extra information - * when taking an exception to AArch32. For those we include the extra coproc - * and TA fields, and mask them out when taking the exception to AArch64. - */ -static inline uint32_t syn_uncategorized(void) -{ - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; -} - -static inline uint32_t syn_aa64_svc(uint32_t imm16) -{ - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa64_hvc(uint32_t imm16) -{ - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa64_smc(uint32_t imm16) -{ - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) -{ - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); -} - -static inline uint32_t syn_aa32_hvc(uint32_t imm16) -{ - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa32_smc(void) -{ - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; -} - -static inline uint32_t syn_aa64_bkpt(uint32_t imm16) -{ - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); -} - -static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) -{ - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); -} - -static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, - int crn, int crm, int rt, - int isread) -{ - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; -} - -static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, - int crn, int crm, int rt, int isread, - bool is_16bit) -{ - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; -} - -static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, - int crn, int crm, int rt, int isread, - bool is_16bit) -{ - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; -} - -static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, - int rt, int rt2, int isread, - bool is_16bit) -{ - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; -} - -static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, - int rt, int rt2, int isread, - bool is_16bit) -{ - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; -} - -static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 coproc == 0xa */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | 0xa; -} - -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); -} - -static inline uint32_t syn_sve_access_trap(void) -{ - return EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT; -} - -static inline uint32_t syn_pactrap(void) -{ - return EC_PACTRAP << ARM_EL_EC_SHIFT; -} - -static inline uint32_t syn_btitrap(int btype) -{ - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | btype; -} - -static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -{ - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; -} - -static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, - int ea, int cm, int s1ptw, - int wnr, int fsc) -{ - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; -} - -static inline uint32_t syn_data_abort_with_iss(int same_el, - int sas, int sse, int srt, - int sf, int ar, - int ea, int cm, int s1ptw, - int wnr, int fsc, - bool is_16bit) -{ - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; -} - -static inline uint32_t syn_swstep(int same_el, int isv, int ex) -{ - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; -} - -static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) -{ - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; -} - -static inline uint32_t syn_breakpoint(int same_el) -{ - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; -} - -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -{ - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; -} - /* Update a QEMU watchpoint based on the information the guest has set in the * DBGWCR<n>_EL1 and DBGWVR<n>_EL1 registers. */ diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARM CPU -- syndrome functions and types + * + * Copyright (c) 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This header defines functions, types, etc which need to be shared + * between different source files within target/arm/ but which are + * private to it and not required by the rest of QEMU. + */ + +#ifndef TARGET_ARM_SYNDROME_H +#define TARGET_ARM_SYNDROME_H + +/* Valid Syndrome Register EC field values */ +enum arm_exception_class { + EC_UNCATEGORIZED = 0x00, + EC_WFX_TRAP = 0x01, + EC_CP15RTTRAP = 0x03, + EC_CP15RRTTRAP = 0x04, + EC_CP14RTTRAP = 0x05, + EC_CP14DTTRAP = 0x06, + EC_ADVSIMDFPACCESSTRAP = 0x07, + EC_FPIDTRAP = 0x08, + EC_PACTRAP = 0x09, + EC_CP14RRTTRAP = 0x0c, + EC_BTITRAP = 0x0d, + EC_ILLEGALSTATE = 0x0e, + EC_AA32_SVC = 0x11, + EC_AA32_HVC = 0x12, + EC_AA32_SMC = 0x13, + EC_AA64_SVC = 0x15, + EC_AA64_HVC = 0x16, + EC_AA64_SMC = 0x17, + EC_SYSTEMREGISTERTRAP = 0x18, + EC_SVEACCESSTRAP = 0x19, + EC_INSNABORT = 0x20, + EC_INSNABORT_SAME_EL = 0x21, + EC_PCALIGNMENT = 0x22, + EC_DATAABORT = 0x24, + EC_DATAABORT_SAME_EL = 0x25, + EC_SPALIGNMENT = 0x26, + EC_AA32_FPTRAP = 0x28, + EC_AA64_FPTRAP = 0x2c, + EC_SERROR = 0x2f, + EC_BREAKPOINT = 0x30, + EC_BREAKPOINT_SAME_EL = 0x31, + EC_SOFTWARESTEP = 0x32, + EC_SOFTWARESTEP_SAME_EL = 0x33, + EC_WATCHPOINT = 0x34, + EC_WATCHPOINT_SAME_EL = 0x35, + EC_AA32_BKPT = 0x38, + EC_VECTORCATCH = 0x3a, + EC_AA64_BKPT = 0x3c, +}; + +#define ARM_EL_EC_SHIFT 26 +#define ARM_EL_IL_SHIFT 25 +#define ARM_EL_ISV_SHIFT 24 +#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) +#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) + +static inline uint32_t syn_get_ec(uint32_t syn) +{ + return syn >> ARM_EL_EC_SHIFT; +} + +/* + * Utility functions for constructing various kinds of syndrome value. + * Note that in general we follow the AArch64 syndrome values; in a + * few cases the value in HSR for exceptions taken to AArch32 Hyp + * mode differs slightly, and we fix this up when populating HSR in + * arm_cpu_do_interrupt_aarch32_hyp(). + * The exception is FP/SIMD access traps -- these report extra information + * when taking an exception to AArch32. For those we include the extra coproc + * and TA fields, and mask them out when taking the exception to AArch64. + */ +static inline uint32_t syn_uncategorized(void) +{ + return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + +static inline uint32_t syn_aa64_svc(uint32_t imm16) +{ + return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa64_hvc(uint32_t imm16) +{ + return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa64_smc(uint32_t imm16) +{ + return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) +{ + return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) + | (is_16bit ? 0 : ARM_EL_IL); +} + +static inline uint32_t syn_aa32_hvc(uint32_t imm16) +{ + return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa32_smc(void) +{ + return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + +static inline uint32_t syn_aa64_bkpt(uint32_t imm16) +{ + return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); +} + +static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) +{ + return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) + | (is_16bit ? 0 : ARM_EL_IL); +} + +static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, + int crn, int crm, int rt, + int isread) +{ + return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL + | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) + | (crm << 1) | isread; +} + +static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, + int crn, int crm, int rt, int isread, + bool is_16bit) +{ + return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) + | (crn << 10) | (rt << 5) | (crm << 1) | isread; +} + +static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, + int crn, int crm, int rt, int isread, + bool is_16bit) +{ + return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) + | (crn << 10) | (rt << 5) | (crm << 1) | isread; +} + +static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, + int rt, int rt2, int isread, + bool is_16bit) +{ + return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (opc1 << 16) + | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; +} + +static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, + int rt, int rt2, int isread, + bool is_16bit) +{ + return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (opc1 << 16) + | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; +} + +static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit) +{ + /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 coproc == 0xa */ + return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | 0xa; +} + +static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) +{ + /* AArch32 SIMD trap: TA == 1 coproc == 0 */ + return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | (cv << 24) | (cond << 20) | (1 << 5); +} + +static inline uint32_t syn_sve_access_trap(void) +{ + return EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT; +} + +static inline uint32_t syn_pactrap(void) +{ + return EC_PACTRAP << ARM_EL_EC_SHIFT; +} + +static inline uint32_t syn_btitrap(int btype) +{ + return (EC_BTITRAP << ARM_EL_EC_SHIFT) | btype; +} + +static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) +{ + return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; +} + +static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, + int ea, int cm, int s1ptw, + int wnr, int fsc) +{ + return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL + | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) + | (wnr << 6) | fsc; +} + +static inline uint32_t syn_data_abort_with_iss(int same_el, + int sas, int sse, int srt, + int sf, int ar, + int ea, int cm, int s1ptw, + int wnr, int fsc, + bool is_16bit) +{ + return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | (is_16bit ? 0 : ARM_EL_IL) + | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) + | (sf << 15) | (ar << 14) + | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; +} + +static inline uint32_t syn_swstep(int same_el, int isv, int ex) +{ + return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; +} + +static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) +{ + return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; +} + +static inline uint32_t syn_breakpoint(int same_el) +{ + return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) + | ARM_EL_IL | 0x22; +} + +static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +{ + return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | + (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | + (cv << 24) | (cond << 20) | ti; +} + +#endif /* TARGET_ARM_SYNDROME_H */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> A proper syndrome is required to fill in the proper si_code. Use page_get_flags to determine permission vs translation for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/cpu_loop.c | 24 +++++++++++++++++++++--- target/arm/tlb_helper.c | 15 +++++++++------ 2 files changed, 30 insertions(+), 9 deletions(-) diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ #include "cpu_loop-common.h" #include "qemu/guest-random.h" #include "hw/semihosting/common-semi.h" +#include "target/arm/syndrome.h" #define get_user_code_u32(x, gaddr, env) \ ({ abi_long __r = get_user_u32((x), (gaddr)); \ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) { CPUState *cs = env_cpu(env); - int trapnr; + int trapnr, ec, fsc; abi_long ret; target_siginfo_t info; @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) case EXCP_DATA_ABORT: info.si_signo = TARGET_SIGSEGV; info.si_errno = 0; - /* XXX: check env->error_code */ - info.si_code = TARGET_SEGV_MAPERR; info._sifields._sigfault._addr = env->exception.vaddress; + + /* We should only arrive here with EC in {DATAABORT, INSNABORT}. */ + ec = syn_get_ec(env->exception.syndrome); + assert(ec == EC_DATAABORT || ec == EC_INSNABORT); + + /* Both EC have the same format for FSC, or close enough. */ + fsc = extract32(env->exception.syndrome, 0, 6); + switch (fsc) { + case 0x04 ... 0x07: /* Translation fault, level {0-3} */ + info.si_code = TARGET_SEGV_MAPERR; + break; + case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ + case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ + info.si_code = TARGET_SEGV_ACCERR; + break; + default: + g_assert_not_reached(); + } + queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); break; case EXCP_DEBUG: diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, bool probe, uintptr_t retaddr) { ARMCPU *cpu = ARM_CPU(cs); + ARMMMUFaultInfo fi = {}; #ifdef CONFIG_USER_ONLY - cpu->env.exception.vaddress = address; - if (access_type == MMU_INST_FETCH) { - cs->exception_index = EXCP_PREFETCH_ABORT; + int flags = page_get_flags(useronly_clean_ptr(address)); + if (flags & PAGE_VALID) { + fi.type = ARMFault_Permission; } else { - cs->exception_index = EXCP_DATA_ABORT; + fi.type = ARMFault_Translation; } - cpu_loop_exit_restore(cs, retaddr); + + /* now we have a real cpu fault */ + cpu_restore_state(cs, retaddr, true); + arm_deliver_fault(cpu, address, access_type, mmu_idx, &fi); #else hwaddr phys_addr; target_ulong page_size; int prot, ret; MemTxAttrs attrs = {}; - ARMMMUFaultInfo fi = {}; ARMCacheAttrs cacheattrs = {}; /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_signal.h | 2 ++ linux-user/aarch64/cpu_loop.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/linux-user/aarch64/target_signal.h b/linux-user/aarch64/target_signal.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_signal.h +++ b/linux-user/aarch64/target_signal.h @@ -XXX,XX +XXX,XX @@ typedef struct target_sigaltstack { #include "../generic/signal.h" +#define TARGET_SEGV_MTESERR 9 /* Synchronous ARM MTE exception */ + #define TARGET_ARCH_HAS_SETUP_FRAME #endif /* AARCH64_TARGET_SIGNAL_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ info.si_code = TARGET_SEGV_ACCERR; break; + case 0x11: /* Synchronous Tag Check Fault */ + info.si_code = TARGET_SEGV_MTESERR; + break; default: g_assert_not_reached(); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The real kernel collects _TIF_MTE_ASYNC_FAULT into the current thread's state on any kernel entry (interrupt, exception etc), and then delivers the signal in advance of resuming the thread. This means that while the signal won't be delivered immediately, it will not be delayed forever -- at minimum it will be delivered after the next clock interrupt. We don't have a clock interrupt in linux-user, so we issue a cpu_kick to signal a return to the main loop at the end of the current TB. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_signal.h | 1 + linux-user/aarch64/cpu_loop.c | 11 +++++++++++ target/arm/mte_helper.c | 10 ++++++++++ 3 files changed, 22 insertions(+) diff --git a/linux-user/aarch64/target_signal.h b/linux-user/aarch64/target_signal.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_signal.h +++ b/linux-user/aarch64/target_signal.h @@ -XXX,XX +XXX,XX @@ typedef struct target_sigaltstack { #include "../generic/signal.h" +#define TARGET_SEGV_MTEAERR 8 /* Asynchronous ARM MTE error */ #define TARGET_SEGV_MTESERR 9 /* Synchronous ARM MTE exception */ #define TARGET_ARCH_HAS_SETUP_FRAME diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) EXCP_DUMP(env, "qemu: unhandled CPU exception 0x%x - aborting\n", trapnr); abort(); } + + /* Check for MTE asynchronous faults */ + if (unlikely(env->cp15.tfsr_el[0])) { + env->cp15.tfsr_el[0] = 0; + info.si_signo = TARGET_SIGSEGV; + info.si_errno = 0; + info._sifields._sigfault._addr = 0; + info.si_code = TARGET_SEGV_MTEAERR; + queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); + } + process_pending_signals(env); /* Exception return on AArch64 always clears the exclusive monitor, * so any return to running guest code implies this. diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc, select = 0; } env->cp15.tfsr_el[el] |= 1 << select; +#ifdef CONFIG_USER_ONLY + /* + * Stand in for a timer irq, setting _TIF_MTE_ASYNC_FAULT, + * which then sends a SIGSEGV when the thread is next scheduled. + * This cpu will return to the main loop at the end of the TB, + * which is rather sooner than "normal". But the alternative + * is waiting until the next syscall. + */ + qemu_cpu_kick(env_cpu(env)); +#endif break; default: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use the now-saved PAGE_ANON and PAGE_MTE bits, and the per-page saved data. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static uint8_t *allocation_tag_mem(CPUARMState *env, int ptr_mmu_idx, int tag_size, uintptr_t ra) { #ifdef CONFIG_USER_ONLY - /* Tag storage not implemented. */ - return NULL; + uint64_t clean_ptr = useronly_clean_ptr(ptr); + int flags = page_get_flags(clean_ptr); + uint8_t *tags; + uintptr_t index; + + if (!(flags & (ptr_access == MMU_DATA_STORE ? PAGE_WRITE : PAGE_READ))) { + /* SIGSEGV */ + arm_cpu_tlb_fill(env_cpu(env), ptr, ptr_size, ptr_access, + ptr_mmu_idx, false, ra); + g_assert_not_reached(); + } + + /* Require both MAP_ANON and PROT_MTE for the page. */ + if (!(flags & PAGE_ANON) || !(flags & PAGE_MTE)) { + return NULL; + } + + tags = page_get_target_data(clean_ptr); + if (tags == NULL) { + size_t alloc_size = TARGET_PAGE_SIZE >> (LOG2_TAG_GRANULE + 1); + tags = page_alloc_target_data(clean_ptr, alloc_size); + assert(tags != NULL); + } + + index = extract32(ptr, LOG2_TAG_GRANULE + 1, + TARGET_PAGE_BITS - LOG2_TAG_GRANULE - 1); + return tags + index; #else uintptr_t index; CPUIOTLBEntry *iotlbentry; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) * Note that this must match useronly_clean_ptr. */ env->cp15.tcr_el[1].raw_tcr = (1ULL << 37); + + /* Enable MTE */ + if (cpu_isar_feature(aa64_mte, cpu)) { + /* Enable tag access, but leave TCF0 as No Effect (0). */ + env->cp15.sctlr_el[1] |= SCTLR_ATA0; + /* + * Exclude all tags, so that tag 0 is always used. + * This corresponds to Linux current->thread.gcr_incl = 0. + * + * Set RRND, so that helper_irg() will generate a seed later. + * Here in cpu_reset(), the crypto subsystem has not yet been + * initialized. + */ + env->cp15.gcr_el1 = 0x1ffff; + } #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/mte.h | 60 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/mte-1.c | 28 +++++++++++++++ tests/tcg/aarch64/mte-2.c | 45 +++++++++++++++++++++++ tests/tcg/aarch64/mte-3.c | 51 ++++++++++++++++++++++++++ tests/tcg/aarch64/mte-4.c | 45 +++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 6 ++++ tests/tcg/configure.sh | 4 +++ 7 files changed, 239 insertions(+) create mode 100644 tests/tcg/aarch64/mte.h create mode 100644 tests/tcg/aarch64/mte-1.c create mode 100644 tests/tcg/aarch64/mte-2.c create mode 100644 tests/tcg/aarch64/mte-3.c create mode 100644 tests/tcg/aarch64/mte-4.c diff --git a/tests/tcg/aarch64/mte.h b/tests/tcg/aarch64/mte.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte.h @@ -XXX,XX +XXX,XX @@ +/* + * Linux kernel fallback API definitions for MTE and test helpers. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <assert.h> +#include <string.h> +#include <stdlib.h> +#include <stdio.h> +#include <unistd.h> +#include <signal.h> +#include <sys/mman.h> +#include <sys/prctl.h> + +#ifndef PR_SET_TAGGED_ADDR_CTRL +# define PR_SET_TAGGED_ADDR_CTRL 55 +#endif +#ifndef PR_TAGGED_ADDR_ENABLE +# define PR_TAGGED_ADDR_ENABLE (1UL << 0) +#endif +#ifndef PR_MTE_TCF_SHIFT +# define PR_MTE_TCF_SHIFT 1 +# define PR_MTE_TCF_NONE (0UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_SYNC (1UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_ASYNC (2UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TAG_SHIFT 3 +#endif + +#ifndef PROT_MTE +# define PROT_MTE 0x20 +#endif + +#ifndef SEGV_MTEAERR +# define SEGV_MTEAERR 8 +# define SEGV_MTESERR 9 +#endif + +static void enable_mte(int tcf) +{ + int r = prctl(PR_SET_TAGGED_ADDR_CTRL, + PR_TAGGED_ADDR_ENABLE | tcf | (0xfffe << PR_MTE_TAG_SHIFT), + 0, 0, 0); + if (r < 0) { + perror("PR_SET_TAGGED_ADDR_CTRL"); + exit(2); + } +} + +static void *alloc_mte_mem(size_t size) +{ + void *p = mmap(NULL, size, PROT_READ | PROT_WRITE | PROT_MTE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (p == MAP_FAILED) { + perror("mmap PROT_MTE"); + exit(2); + } + return p; +} diff --git a/tests/tcg/aarch64/mte-1.c b/tests/tcg/aarch64/mte-1.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-1.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, basic pass cases. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +int main(int ac, char **av) +{ + int *p0, *p1, *p2; + long c; + + enable_mte(PR_MTE_TCF_NONE); + p0 = alloc_mte_mem(sizeof(*p0)); + + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(1)); + assert(p1 != p0); + asm("subp %0,%1,%2" : "=r"(c) : "r"(p0), "r"(p1)); + assert(c == 0); + + asm("stg %0, [%0]" : : "r"(p1)); + asm("ldg %0, [%1]" : "=r"(p2) : "r"(p0), "0"(p0)); + assert(p1 == p2); + + return 0; +} diff --git a/tests/tcg/aarch64/mte-2.c b/tests/tcg/aarch64/mte-2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-2.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, basic fail cases, synchronous signals. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +void pass(int sig, siginfo_t *info, void *uc) +{ + assert(info->si_code == SEGV_MTESERR); + exit(0); +} + +int main(int ac, char **av) +{ + struct sigaction sa; + int *p0, *p1, *p2; + long excl = 1; + + enable_mte(PR_MTE_TCF_SYNC); + p0 = alloc_mte_mem(sizeof(*p0)); + + /* Create two differently tagged pointers. */ + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(excl)); + asm("gmi %0,%1,%0" : "+r"(excl) : "r" (p1)); + assert(excl != 1); + asm("irg %0,%1,%2" : "=r"(p2) : "r"(p0), "r"(excl)); + assert(p1 != p2); + + /* Store the tag from the first pointer. */ + asm("stg %0, [%0]" : : "r"(p1)); + + *p1 = 0; + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = pass; + sa.sa_flags = SA_SIGINFO; + sigaction(SIGSEGV, &sa, NULL); + + *p2 = 0; + + abort(); +} diff --git a/tests/tcg/aarch64/mte-3.c b/tests/tcg/aarch64/mte-3.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-3.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, basic fail cases, asynchronous signals. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +void pass(int sig, siginfo_t *info, void *uc) +{ + assert(info->si_code == SEGV_MTEAERR); + exit(0); +} + +int main(int ac, char **av) +{ + struct sigaction sa; + long *p0, *p1, *p2; + long excl = 1; + + enable_mte(PR_MTE_TCF_ASYNC); + p0 = alloc_mte_mem(sizeof(*p0)); + + /* Create two differently tagged pointers. */ + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(excl)); + asm("gmi %0,%1,%0" : "+r"(excl) : "r" (p1)); + assert(excl != 1); + asm("irg %0,%1,%2" : "=r"(p2) : "r"(p0), "r"(excl)); + assert(p1 != p2); + + /* Store the tag from the first pointer. */ + asm("stg %0, [%0]" : : "r"(p1)); + + *p1 = 0; + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = pass; + sa.sa_flags = SA_SIGINFO; + sigaction(SIGSEGV, &sa, NULL); + + /* + * Signal for async error will happen eventually. + * For a real kernel this should be after the next IRQ (e.g. timer). + * For qemu linux-user, we kick the cpu and exit at the next TB. + * In either case, loop until this happens (or killed by timeout). + * For extra sauce, yield, producing EXCP_YIELD to cpu_loop(). + */ + asm("str %0, [%0]; yield" : : "r"(p2)); + while (1); +} diff --git a/tests/tcg/aarch64/mte-4.c b/tests/tcg/aarch64/mte-4.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/mte-4.c @@ -XXX,XX +XXX,XX @@ +/* + * Memory tagging, re-reading tag checks. + * + * Copyright (c) 2021 Linaro Ltd + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "mte.h" + +void __attribute__((noinline)) tagset(void *p, size_t size) +{ + size_t i; + for (i = 0; i < size; i += 16) { + asm("stg %0, [%0]" : : "r"(p + i)); + } +} + +void __attribute__((noinline)) tagcheck(void *p, size_t size) +{ + size_t i; + void *c; + + for (i = 0; i < size; i += 16) { + asm("ldg %0, [%1]" : "=r"(c) : "r"(p + i), "0"(p)); + assert(c == p); + } +} + +int main(int ac, char **av) +{ + size_t size = getpagesize() * 4; + long excl = 1; + int *p0, *p1; + + enable_mte(PR_MTE_TCF_ASYNC); + p0 = alloc_mte_mem(size); + + /* Tag the pointer. */ + asm("irg %0,%1,%2" : "=r"(p1) : "r"(p0), "r"(excl)); + + tagset(p1, size); + tagcheck(p1, size); + + return 0; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ endif # bti-2 tests PROT_BTI, so no special compiler support required. AARCH64_TESTS += bti-2 +# MTE Tests +ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_MTE),) +AARCH64_TESTS += mte-1 mte-2 mte-3 mte-4 +mte-%: CFLAGS += -march=armv8.5-a+memtag +endif + # Semihosting smoke test for linux-user AARCH64_TESTS += semihosting run-semihosting: semihosting diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh index XXXXXXX..XXXXXXX 100755 --- a/tests/tcg/configure.sh +++ b/tests/tcg/configure.sh @@ -XXX,XX +XXX,XX @@ for target in $target_list; do -mbranch-protection=standard -o $TMPE $TMPC; then echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak fi + if do_compiler "$target_compiler" $target_compiler_cflags \ + -march=armv8.5-a+memtag -o $TMPE $TMPC; then + echo "CROSS_CC_HAS_ARMV8_MTE=y" >> $config_target_mak + fi ;; esac -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/i2c/npcm7xx_smbus.h | 88 ++++ hw/arm/npcm7xx.c | 68 ++- hw/i2c/npcm7xx_smbus.c | 783 +++++++++++++++++++++++++++++++++ hw/i2c/meson.build | 1 + hw/i2c/trace-events | 11 + 7 files changed, 938 insertions(+), 17 deletions(-) create mode 100644 include/hw/i2c/npcm7xx_smbus.h create mode 100644 hw/i2c/npcm7xx_smbus.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * GPIO controller * Analog to Digital Converter (ADC) * Pulse Width Modulation (PWM) + * SMBus controller (SMBF) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controllers (GMAC and EMC) * USB device (USBD) - * SMBus controller (SMBF) * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/adc/npcm7xx_adc.h" #include "hw/cpu/a9mpcore.h" #include "hw/gpio/npcm7xx_gpio.h" +#include "hw/i2c/npcm7xx_smbus.h" #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxMCState mc; NPCM7xxRNGState rng; NPCM7xxGPIOState gpio[8]; + NPCM7xxSMBusState smbus[16]; EHCISysBusState ehci; OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx SMBus Module. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM7XX_SMBUS_H +#define NPCM7XX_SMBUS_H + +#include "exec/memory.h" +#include "hw/i2c/i2c.h" +#include "hw/irq.h" +#include "hw/sysbus.h" + +/* + * Number of addresses this module contains. Do not change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM7XX_SMBUS_NR_ADDRS 10 + +typedef enum NPCM7xxSMBusStatus { + NPCM7XX_SMBUS_STATUS_IDLE, + NPCM7XX_SMBUS_STATUS_SENDING, + NPCM7XX_SMBUS_STATUS_RECEIVING, + NPCM7XX_SMBUS_STATUS_NEGACK, + NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE, + NPCM7XX_SMBUS_STATUS_STOPPING_NEGACK, +} NPCM7xxSMBusStatus; + +/* + * struct NPCM7xxSMBusState - System Management Bus device state. + * @bus: The underlying I2C Bus. + * @irq: GIC interrupt line to fire on events (if enabled). + * @sda: The serial data register. + * @st: The status register. + * @cst: The control status register. + * @cst2: The control status register 2. + * @cst3: The control status register 3. + * @ctl1: The control register 1. + * @ctl2: The control register 2. + * @ctl3: The control register 3. + * @ctl4: The control register 4. + * @ctl5: The control register 5. + * @addr: The SMBus module's own addresses on the I2C bus. + * @scllt: The SCL low time register. + * @sclht: The SCL high time register. + * @status: The current status of the SMBus. + */ +typedef struct NPCM7xxSMBusState { + SysBusDevice parent; + + MemoryRegion iomem; + + I2CBus *bus; + qemu_irq irq; + + uint8_t sda; + uint8_t st; + uint8_t cst; + uint8_t cst2; + uint8_t cst3; + uint8_t ctl1; + uint8_t ctl2; + uint8_t ctl3; + uint8_t ctl4; + uint8_t ctl5; + uint8_t addr[NPCM7XX_SMBUS_NR_ADDRS]; + + uint8_t scllt; + uint8_t sclht; + + NPCM7xxSMBusStatus status; +} NPCM7xxSMBusState; + +#define TYPE_NPCM7XX_SMBUS "npcm7xx-smbus" +#define NPCM7XX_SMBUS(obj) OBJECT_CHECK(NPCM7xxSMBusState, (obj), \ + TYPE_NPCM7XX_SMBUS) + +#endif /* NPCM7XX_SMBUS_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ NPCM7XX_EHCI_IRQ = 61, NPCM7XX_OHCI_IRQ = 62, + NPCM7XX_SMBUS0_IRQ = 64, + NPCM7XX_SMBUS1_IRQ, + NPCM7XX_SMBUS2_IRQ, + NPCM7XX_SMBUS3_IRQ, + NPCM7XX_SMBUS4_IRQ, + NPCM7XX_SMBUS5_IRQ, + NPCM7XX_SMBUS6_IRQ, + NPCM7XX_SMBUS7_IRQ, + NPCM7XX_SMBUS8_IRQ, + NPCM7XX_SMBUS9_IRQ, + NPCM7XX_SMBUS10_IRQ, + NPCM7XX_SMBUS11_IRQ, + NPCM7XX_SMBUS12_IRQ, + NPCM7XX_SMBUS13_IRQ, + NPCM7XX_SMBUS14_IRQ, + NPCM7XX_SMBUS15_IRQ, NPCM7XX_PWM0_IRQ = 93, /* PWM module 0 */ NPCM7XX_PWM1_IRQ, /* PWM module 1 */ NPCM7XX_GPIO0_IRQ = 116, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_pwm_addr[] = { 0xf0104000, }; +/* Direct memory-mapped access to each SMBus Module. */ +static const hwaddr npcm7xx_smbus_addr[] = { + 0xf0080000, + 0xf0081000, + 0xf0082000, + 0xf0083000, + 0xf0084000, + 0xf0085000, + 0xf0086000, + 0xf0087000, + 0xf0088000, + 0xf0089000, + 0xf008a000, + 0xf008b000, + 0xf008c000, + 0xf008d000, + 0xf008e000, + 0xf008f000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "gpio[*]", &s->gpio[i], TYPE_NPCM7XX_GPIO); } + for (i = 0; i < ARRAY_SIZE(s->smbus); i++) { + object_initialize_child(obj, "smbus[*]", &s->smbus[i], + TYPE_NPCM7XX_SMBUS); + } + object_initialize_child(obj, "ehci", &s->ehci, TYPE_NPCM7XX_EHCI); object_initialize_child(obj, "ohci", &s->ohci, TYPE_SYSBUS_OHCI); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) npcm7xx_irq(s, NPCM7XX_GPIO0_IRQ + i)); } + /* SMBus modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_smbus_addr) != ARRAY_SIZE(s->smbus)); + for (i = 0; i < ARRAY_SIZE(s->smbus); i++) { + Object *obj = OBJECT(&s->smbus[i]); + + sysbus_realize(SYS_BUS_DEVICE(obj), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(obj), 0, npcm7xx_smbus_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(obj), 0, + npcm7xx_irq(s, NPCM7XX_SMBUS0_IRQ + i)); + } + /* USB Host */ object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true, &error_abort); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); create_unimplemented_device("npcm7xx.kcs", 0xf0007000, 4 * KiB); create_unimplemented_device("npcm7xx.gfxi", 0xf000e000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[0]", 0xf0080000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[1]", 0xf0081000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[2]", 0xf0082000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[3]", 0xf0083000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[4]", 0xf0084000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[5]", 0xf0085000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[6]", 0xf0086000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[7]", 0xf0087000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[8]", 0xf0088000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[9]", 0xf0089000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[10]", 0xf008a000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[11]", 0xf008b000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[12]", 0xf008c000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[13]", 0xf008d000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[14]", 0xf008e000, 4 * KiB); - create_unimplemented_device("npcm7xx.smbus[15]", 0xf008f000, 4 * KiB); create_unimplemented_device("npcm7xx.espi", 0xf009f000, 4 * KiB); create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); diff --git a/hw/i2c/npcm7xx_smbus.c b/hw/i2c/npcm7xx_smbus.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/npcm7xx_smbus.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx SMBus Module. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/i2c/npcm7xx_smbus.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/guest-random.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +enum NPCM7xxSMBusCommonRegister { + NPCM7XX_SMB_SDA = 0x0, + NPCM7XX_SMB_ST = 0x2, + NPCM7XX_SMB_CST = 0x4, + NPCM7XX_SMB_CTL1 = 0x6, + NPCM7XX_SMB_ADDR1 = 0x8, + NPCM7XX_SMB_CTL2 = 0xa, + NPCM7XX_SMB_ADDR2 = 0xc, + NPCM7XX_SMB_CTL3 = 0xe, + NPCM7XX_SMB_CST2 = 0x18, + NPCM7XX_SMB_CST3 = 0x19, + NPCM7XX_SMB_VER = 0x1f, +}; + +enum NPCM7xxSMBusBank0Register { + NPCM7XX_SMB_ADDR3 = 0x10, + NPCM7XX_SMB_ADDR7 = 0x11, + NPCM7XX_SMB_ADDR4 = 0x12, + NPCM7XX_SMB_ADDR8 = 0x13, + NPCM7XX_SMB_ADDR5 = 0x14, + NPCM7XX_SMB_ADDR9 = 0x15, + NPCM7XX_SMB_ADDR6 = 0x16, + NPCM7XX_SMB_ADDR10 = 0x17, + NPCM7XX_SMB_CTL4 = 0x1a, + NPCM7XX_SMB_CTL5 = 0x1b, + NPCM7XX_SMB_SCLLT = 0x1c, + NPCM7XX_SMB_FIF_CTL = 0x1d, + NPCM7XX_SMB_SCLHT = 0x1e, +}; + +enum NPCM7xxSMBusBank1Register { + NPCM7XX_SMB_FIF_CTS = 0x10, + NPCM7XX_SMB_FAIR_PER = 0x11, + NPCM7XX_SMB_TXF_CTL = 0x12, + NPCM7XX_SMB_T_OUT = 0x14, + NPCM7XX_SMB_TXF_STS = 0x1a, + NPCM7XX_SMB_RXF_STS = 0x1c, + NPCM7XX_SMB_RXF_CTL = 0x1e, +}; + +/* ST fields */ +#define NPCM7XX_SMBST_STP BIT(7) +#define NPCM7XX_SMBST_SDAST BIT(6) +#define NPCM7XX_SMBST_BER BIT(5) +#define NPCM7XX_SMBST_NEGACK BIT(4) +#define NPCM7XX_SMBST_STASTR BIT(3) +#define NPCM7XX_SMBST_NMATCH BIT(2) +#define NPCM7XX_SMBST_MODE BIT(1) +#define NPCM7XX_SMBST_XMIT BIT(0) + +/* CST fields */ +#define NPCM7XX_SMBCST_ARPMATCH BIT(7) +#define NPCM7XX_SMBCST_MATCHAF BIT(6) +#define NPCM7XX_SMBCST_TGSCL BIT(5) +#define NPCM7XX_SMBCST_TSDA BIT(4) +#define NPCM7XX_SMBCST_GCMATCH BIT(3) +#define NPCM7XX_SMBCST_MATCH BIT(2) +#define NPCM7XX_SMBCST_BB BIT(1) +#define NPCM7XX_SMBCST_BUSY BIT(0) + +/* CST2 fields */ +#define NPCM7XX_SMBCST2_INTSTS BIT(7) +#define NPCM7XX_SMBCST2_MATCH7F BIT(6) +#define NPCM7XX_SMBCST2_MATCH6F BIT(5) +#define NPCM7XX_SMBCST2_MATCH5F BIT(4) +#define NPCM7XX_SMBCST2_MATCH4F BIT(3) +#define NPCM7XX_SMBCST2_MATCH3F BIT(2) +#define NPCM7XX_SMBCST2_MATCH2F BIT(1) +#define NPCM7XX_SMBCST2_MATCH1F BIT(0) + +/* CST3 fields */ +#define NPCM7XX_SMBCST3_EO_BUSY BIT(7) +#define NPCM7XX_SMBCST3_MATCH10F BIT(2) +#define NPCM7XX_SMBCST3_MATCH9F BIT(1) +#define NPCM7XX_SMBCST3_MATCH8F BIT(0) + +/* CTL1 fields */ +#define NPCM7XX_SMBCTL1_STASTRE BIT(7) +#define NPCM7XX_SMBCTL1_NMINTE BIT(6) +#define NPCM7XX_SMBCTL1_GCMEN BIT(5) +#define NPCM7XX_SMBCTL1_ACK BIT(4) +#define NPCM7XX_SMBCTL1_EOBINTE BIT(3) +#define NPCM7XX_SMBCTL1_INTEN BIT(2) +#define NPCM7XX_SMBCTL1_STOP BIT(1) +#define NPCM7XX_SMBCTL1_START BIT(0) + +/* CTL2 fields */ +#define NPCM7XX_SMBCTL2_SCLFRQ(rv) extract8((rv), 1, 6) +#define NPCM7XX_SMBCTL2_ENABLE BIT(0) + +/* CTL3 fields */ +#define NPCM7XX_SMBCTL3_SCL_LVL BIT(7) +#define NPCM7XX_SMBCTL3_SDA_LVL BIT(6) +#define NPCM7XX_SMBCTL3_BNK_SEL BIT(5) +#define NPCM7XX_SMBCTL3_400K_MODE BIT(4) +#define NPCM7XX_SMBCTL3_IDL_START BIT(3) +#define NPCM7XX_SMBCTL3_ARPMEN BIT(2) +#define NPCM7XX_SMBCTL3_SCLFRQ(rv) extract8((rv), 0, 2) + +/* ADDR fields */ +#define NPCM7XX_ADDR_EN BIT(7) +#define NPCM7XX_ADDR_A(rv) extract8((rv), 0, 6) + +#define KEEP_OLD_BIT(o, n, b) (((n) & (~(b))) | ((o) & (b))) +#define WRITE_ONE_CLEAR(o, n, b) ((n) & (b) ? (o) & (~(b)) : (o)) + +#define NPCM7XX_SMBUS_ENABLED(s) ((s)->ctl2 & NPCM7XX_SMBCTL2_ENABLE) + +/* VERSION fields values, read-only. */ +#define NPCM7XX_SMBUS_VERSION_NUMBER 1 +#define NPCM7XX_SMBUS_VERSION_FIFO_SUPPORTED 0 + +/* Reset values */ +#define NPCM7XX_SMB_ST_INIT_VAL 0x00 +#define NPCM7XX_SMB_CST_INIT_VAL 0x10 +#define NPCM7XX_SMB_CST2_INIT_VAL 0x00 +#define NPCM7XX_SMB_CST3_INIT_VAL 0x00 +#define NPCM7XX_SMB_CTL1_INIT_VAL 0x00 +#define NPCM7XX_SMB_CTL2_INIT_VAL 0x00 +#define NPCM7XX_SMB_CTL3_INIT_VAL 0xc0 +#define NPCM7XX_SMB_CTL4_INIT_VAL 0x07 +#define NPCM7XX_SMB_CTL5_INIT_VAL 0x00 +#define NPCM7XX_SMB_ADDR_INIT_VAL 0x00 +#define NPCM7XX_SMB_SCLLT_INIT_VAL 0x00 +#define NPCM7XX_SMB_SCLHT_INIT_VAL 0x00 + +static uint8_t npcm7xx_smbus_get_version(void) +{ + return NPCM7XX_SMBUS_VERSION_FIFO_SUPPORTED << 7 | + NPCM7XX_SMBUS_VERSION_NUMBER; +} + +static void npcm7xx_smbus_update_irq(NPCM7xxSMBusState *s) +{ + int level; + + if (s->ctl1 & NPCM7XX_SMBCTL1_INTEN) { + level = !!((s->ctl1 & NPCM7XX_SMBCTL1_NMINTE && + s->st & NPCM7XX_SMBST_NMATCH) || + (s->st & NPCM7XX_SMBST_BER) || + (s->st & NPCM7XX_SMBST_NEGACK) || + (s->st & NPCM7XX_SMBST_SDAST) || + (s->ctl1 & NPCM7XX_SMBCTL1_STASTRE && + s->st & NPCM7XX_SMBST_SDAST) || + (s->ctl1 & NPCM7XX_SMBCTL1_EOBINTE && + s->cst3 & NPCM7XX_SMBCST3_EO_BUSY)); + + if (level) { + s->cst2 |= NPCM7XX_SMBCST2_INTSTS; + } else { + s->cst2 &= ~NPCM7XX_SMBCST2_INTSTS; + } + qemu_set_irq(s->irq, level); + } +} + +static void npcm7xx_smbus_nack(NPCM7xxSMBusState *s) +{ + s->st &= ~NPCM7XX_SMBST_SDAST; + s->st |= NPCM7XX_SMBST_NEGACK; + s->status = NPCM7XX_SMBUS_STATUS_NEGACK; +} + +static void npcm7xx_smbus_send_byte(NPCM7xxSMBusState *s, uint8_t value) +{ + int rv = i2c_send(s->bus, value); + + if (rv) { + npcm7xx_smbus_nack(s); + } else { + s->st |= NPCM7XX_SMBST_SDAST; + } + trace_npcm7xx_smbus_send_byte((DEVICE(s)->canonical_path), value, !rv); + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_recv_byte(NPCM7xxSMBusState *s) +{ + s->sda = i2c_recv(s->bus); + s->st |= NPCM7XX_SMBST_SDAST; + if (s->st & NPCM7XX_SMBCTL1_ACK) { + trace_npcm7xx_smbus_nack(DEVICE(s)->canonical_path); + i2c_nack(s->bus); + s->st &= NPCM7XX_SMBCTL1_ACK; + } + trace_npcm7xx_smbus_recv_byte((DEVICE(s)->canonical_path), s->sda); + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_start(NPCM7xxSMBusState *s) +{ + /* + * We can start the bus if one of these is true: + * 1. The bus is idle (so we can request it) + * 2. We are the occupier (it's a repeated start condition.) + */ + int available = !i2c_bus_busy(s->bus) || + s->status != NPCM7XX_SMBUS_STATUS_IDLE; + + if (available) { + s->st |= NPCM7XX_SMBST_MODE | NPCM7XX_SMBST_XMIT | NPCM7XX_SMBST_SDAST; + s->cst |= NPCM7XX_SMBCST_BUSY; + } else { + s->st &= ~NPCM7XX_SMBST_MODE; + s->cst &= ~NPCM7XX_SMBCST_BUSY; + s->st |= NPCM7XX_SMBST_BER; + } + + trace_npcm7xx_smbus_start(DEVICE(s)->canonical_path, available); + s->cst |= NPCM7XX_SMBCST_BB; + s->status = NPCM7XX_SMBUS_STATUS_IDLE; + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_send_address(NPCM7xxSMBusState *s, uint8_t value) +{ + int recv; + int rv; + + recv = value & BIT(0); + rv = i2c_start_transfer(s->bus, value >> 1, recv); + trace_npcm7xx_smbus_send_address(DEVICE(s)->canonical_path, + value >> 1, recv, !rv); + if (rv) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: requesting i2c bus for 0x%02x failed: %d\n", + DEVICE(s)->canonical_path, value, rv); + /* Failed to start transfer. NACK to reject.*/ + if (recv) { + s->st &= ~NPCM7XX_SMBST_XMIT; + } else { + s->st |= NPCM7XX_SMBST_XMIT; + } + npcm7xx_smbus_nack(s); + npcm7xx_smbus_update_irq(s); + return; + } + + s->st &= ~NPCM7XX_SMBST_NEGACK; + if (recv) { + s->status = NPCM7XX_SMBUS_STATUS_RECEIVING; + s->st &= ~NPCM7XX_SMBST_XMIT; + } else { + s->status = NPCM7XX_SMBUS_STATUS_SENDING; + s->st |= NPCM7XX_SMBST_XMIT; + } + + if (s->ctl1 & NPCM7XX_SMBCTL1_STASTRE) { + s->st |= NPCM7XX_SMBST_STASTR; + if (!recv) { + s->st |= NPCM7XX_SMBST_SDAST; + } + } else if (recv) { + npcm7xx_smbus_recv_byte(s); + } + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_execute_stop(NPCM7xxSMBusState *s) +{ + i2c_end_transfer(s->bus); + s->st = 0; + s->cst = 0; + s->status = NPCM7XX_SMBUS_STATUS_IDLE; + s->cst3 |= NPCM7XX_SMBCST3_EO_BUSY; + trace_npcm7xx_smbus_stop(DEVICE(s)->canonical_path); + npcm7xx_smbus_update_irq(s); +} + + +static void npcm7xx_smbus_stop(NPCM7xxSMBusState *s) +{ + if (s->st & NPCM7XX_SMBST_MODE) { + switch (s->status) { + case NPCM7XX_SMBUS_STATUS_RECEIVING: + case NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE: + s->status = NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE; + break; + + case NPCM7XX_SMBUS_STATUS_NEGACK: + s->status = NPCM7XX_SMBUS_STATUS_STOPPING_NEGACK; + break; + + default: + npcm7xx_smbus_execute_stop(s); + break; + } + } +} + +static uint8_t npcm7xx_smbus_read_sda(NPCM7xxSMBusState *s) +{ + uint8_t value = s->sda; + + switch (s->status) { + case NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE: + npcm7xx_smbus_execute_stop(s); + break; + + case NPCM7XX_SMBUS_STATUS_RECEIVING: + npcm7xx_smbus_recv_byte(s); + break; + + default: + /* Do nothing */ + break; + } + + return value; +} + +static void npcm7xx_smbus_write_sda(NPCM7xxSMBusState *s, uint8_t value) +{ + s->sda = value; + if (s->st & NPCM7XX_SMBST_MODE) { + switch (s->status) { + case NPCM7XX_SMBUS_STATUS_IDLE: + npcm7xx_smbus_send_address(s, value); + break; + case NPCM7XX_SMBUS_STATUS_SENDING: + npcm7xx_smbus_send_byte(s, value); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to SDA in invalid status %d: %u\n", + DEVICE(s)->canonical_path, s->status, value); + break; + } + } +} + +static void npcm7xx_smbus_write_st(NPCM7xxSMBusState *s, uint8_t value) +{ + s->st = WRITE_ONE_CLEAR(s->st, value, NPCM7XX_SMBST_STP); + s->st = WRITE_ONE_CLEAR(s->st, value, NPCM7XX_SMBST_BER); + s->st = WRITE_ONE_CLEAR(s->st, value, NPCM7XX_SMBST_STASTR); + s->st = WRITE_ONE_CLEAR(s->st, value, NPCM7XX_SMBST_NMATCH); + + if (value & NPCM7XX_SMBST_NEGACK) { + s->st &= ~NPCM7XX_SMBST_NEGACK; + if (s->status == NPCM7XX_SMBUS_STATUS_STOPPING_NEGACK) { + npcm7xx_smbus_execute_stop(s); + } + } + + if (value & NPCM7XX_SMBST_STASTR && + s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) { + npcm7xx_smbus_recv_byte(s); + } + + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_write_cst(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t new_value = s->cst; + + s->cst = WRITE_ONE_CLEAR(new_value, value, NPCM7XX_SMBCST_BB); + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_write_cst3(NPCM7xxSMBusState *s, uint8_t value) +{ + s->cst3 = WRITE_ONE_CLEAR(s->cst3, value, NPCM7XX_SMBCST3_EO_BUSY); + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_write_ctl1(NPCM7xxSMBusState *s, uint8_t value) +{ + s->ctl1 = KEEP_OLD_BIT(s->ctl1, value, + NPCM7XX_SMBCTL1_START | NPCM7XX_SMBCTL1_STOP | NPCM7XX_SMBCTL1_ACK); + + if (value & NPCM7XX_SMBCTL1_START) { + npcm7xx_smbus_start(s); + } + + if (value & NPCM7XX_SMBCTL1_STOP) { + npcm7xx_smbus_stop(s); + } + + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_write_ctl2(NPCM7xxSMBusState *s, uint8_t value) +{ + s->ctl2 = value; + + if (!NPCM7XX_SMBUS_ENABLED(s)) { + /* Disable this SMBus module. */ + s->ctl1 = 0; + s->st = 0; + s->cst3 = s->cst3 & (~NPCM7XX_SMBCST3_EO_BUSY); + s->cst = 0; + } +} + +static void npcm7xx_smbus_write_ctl3(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t old_ctl3 = s->ctl3; + + /* Write to SDA and SCL bits are ignored. */ + s->ctl3 = KEEP_OLD_BIT(old_ctl3, value, + NPCM7XX_SMBCTL3_SCL_LVL | NPCM7XX_SMBCTL3_SDA_LVL); +} + +static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCM7xxSMBusState *s = opaque; + uint64_t value = 0; + uint8_t bank = s->ctl3 & NPCM7XX_SMBCTL3_BNK_SEL; + + /* The order of the registers are their order in memory. */ + switch (offset) { + case NPCM7XX_SMB_SDA: + value = npcm7xx_smbus_read_sda(s); + break; + + case NPCM7XX_SMB_ST: + value = s->st; + break; + + case NPCM7XX_SMB_CST: + value = s->cst; + break; + + case NPCM7XX_SMB_CTL1: + value = s->ctl1; + break; + + case NPCM7XX_SMB_ADDR1: + value = s->addr[0]; + break; + + case NPCM7XX_SMB_CTL2: + value = s->ctl2; + break; + + case NPCM7XX_SMB_ADDR2: + value = s->addr[1]; + break; + + case NPCM7XX_SMB_CTL3: + value = s->ctl3; + break; + + case NPCM7XX_SMB_CST2: + value = s->cst2; + break; + + case NPCM7XX_SMB_CST3: + value = s->cst3; + break; + + case NPCM7XX_SMB_VER: + value = npcm7xx_smbus_get_version(); + break; + + /* This register is either invalid or banked at this point. */ + default: + if (bank) { + /* Bank 1 */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + } else { + /* Bank 0 */ + switch (offset) { + case NPCM7XX_SMB_ADDR3: + value = s->addr[2]; + break; + + case NPCM7XX_SMB_ADDR7: + value = s->addr[6]; + break; + + case NPCM7XX_SMB_ADDR4: + value = s->addr[3]; + break; + + case NPCM7XX_SMB_ADDR8: + value = s->addr[7]; + break; + + case NPCM7XX_SMB_ADDR5: + value = s->addr[4]; + break; + + case NPCM7XX_SMB_ADDR9: + value = s->addr[8]; + break; + + case NPCM7XX_SMB_ADDR6: + value = s->addr[5]; + break; + + case NPCM7XX_SMB_ADDR10: + value = s->addr[9]; + break; + + case NPCM7XX_SMB_CTL4: + value = s->ctl4; + break; + + case NPCM7XX_SMB_CTL5: + value = s->ctl5; + break; + + case NPCM7XX_SMB_SCLLT: + value = s->scllt; + break; + + case NPCM7XX_SMB_SCLHT: + value = s->sclht; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } + } + break; + } + + trace_npcm7xx_smbus_read(DEVICE(s)->canonical_path, offset, value, size); + + return value; +} + +static void npcm7xx_smbus_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + NPCM7xxSMBusState *s = opaque; + uint8_t bank = s->ctl3 & NPCM7XX_SMBCTL3_BNK_SEL; + + trace_npcm7xx_smbus_write(DEVICE(s)->canonical_path, offset, value, size); + + /* The order of the registers are their order in memory. */ + switch (offset) { + case NPCM7XX_SMB_SDA: + npcm7xx_smbus_write_sda(s, value); + break; + + case NPCM7XX_SMB_ST: + npcm7xx_smbus_write_st(s, value); + break; + + case NPCM7XX_SMB_CST: + npcm7xx_smbus_write_cst(s, value); + break; + + case NPCM7XX_SMB_CTL1: + npcm7xx_smbus_write_ctl1(s, value); + break; + + case NPCM7XX_SMB_ADDR1: + s->addr[0] = value; + break; + + case NPCM7XX_SMB_CTL2: + npcm7xx_smbus_write_ctl2(s, value); + break; + + case NPCM7XX_SMB_ADDR2: + s->addr[1] = value; + break; + + case NPCM7XX_SMB_CTL3: + npcm7xx_smbus_write_ctl3(s, value); + break; + + case NPCM7XX_SMB_CST2: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only reg: offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + + case NPCM7XX_SMB_CST3: + npcm7xx_smbus_write_cst3(s, value); + break; + + case NPCM7XX_SMB_VER: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only reg: offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + + /* This register is either invalid or banked at this point. */ + default: + if (bank) { + /* Bank 1 */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + } else { + /* Bank 0 */ + switch (offset) { + case NPCM7XX_SMB_ADDR3: + s->addr[2] = value; + break; + + case NPCM7XX_SMB_ADDR7: + s->addr[6] = value; + break; + + case NPCM7XX_SMB_ADDR4: + s->addr[3] = value; + break; + + case NPCM7XX_SMB_ADDR8: + s->addr[7] = value; + break; + + case NPCM7XX_SMB_ADDR5: + s->addr[4] = value; + break; + + case NPCM7XX_SMB_ADDR9: + s->addr[8] = value; + break; + + case NPCM7XX_SMB_ADDR6: + s->addr[5] = value; + break; + + case NPCM7XX_SMB_ADDR10: + s->addr[9] = value; + break; + + case NPCM7XX_SMB_CTL4: + s->ctl4 = value; + break; + + case NPCM7XX_SMB_CTL5: + s->ctl5 = value; + break; + + case NPCM7XX_SMB_SCLLT: + s->scllt = value; + break; + + case NPCM7XX_SMB_SCLHT: + s->sclht = value; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } + } + break; + } +} + +static const MemoryRegionOps npcm7xx_smbus_ops = { + .read = npcm7xx_smbus_read, + .write = npcm7xx_smbus_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 1, + .unaligned = false, + }, +}; + +static void npcm7xx_smbus_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); + + s->st = NPCM7XX_SMB_ST_INIT_VAL; + s->cst = NPCM7XX_SMB_CST_INIT_VAL; + s->cst2 = NPCM7XX_SMB_CST2_INIT_VAL; + s->cst3 = NPCM7XX_SMB_CST3_INIT_VAL; + s->ctl1 = NPCM7XX_SMB_CTL1_INIT_VAL; + s->ctl2 = NPCM7XX_SMB_CTL2_INIT_VAL; + s->ctl3 = NPCM7XX_SMB_CTL3_INIT_VAL; + s->ctl4 = NPCM7XX_SMB_CTL4_INIT_VAL; + s->ctl5 = NPCM7XX_SMB_CTL5_INIT_VAL; + + for (int i = 0; i < NPCM7XX_SMBUS_NR_ADDRS; ++i) { + s->addr[i] = NPCM7XX_SMB_ADDR_INIT_VAL; + } + s->scllt = NPCM7XX_SMB_SCLLT_INIT_VAL; + s->sclht = NPCM7XX_SMB_SCLHT_INIT_VAL; + + s->status = NPCM7XX_SMBUS_STATUS_IDLE; +} + +static void npcm7xx_smbus_hold_reset(Object *obj) +{ + NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); + + qemu_irq_lower(s->irq); +} + +static void npcm7xx_smbus_init(Object *obj) +{ + NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + sysbus_init_irq(sbd, &s->irq); + memory_region_init_io(&s->iomem, obj, &npcm7xx_smbus_ops, s, + "regs", 4 * KiB); + sysbus_init_mmio(sbd, &s->iomem); + + s->bus = i2c_init_bus(DEVICE(s), "i2c-bus"); + s->status = NPCM7XX_SMBUS_STATUS_IDLE; +} + +static const VMStateDescription vmstate_npcm7xx_smbus = { + .name = "npcm7xx-smbus", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(sda, NPCM7xxSMBusState), + VMSTATE_UINT8(st, NPCM7xxSMBusState), + VMSTATE_UINT8(cst, NPCM7xxSMBusState), + VMSTATE_UINT8(cst2, NPCM7xxSMBusState), + VMSTATE_UINT8(cst3, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl1, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl2, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl3, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl4, NPCM7xxSMBusState), + VMSTATE_UINT8(ctl5, NPCM7xxSMBusState), + VMSTATE_UINT8_ARRAY(addr, NPCM7xxSMBusState, NPCM7XX_SMBUS_NR_ADDRS), + VMSTATE_UINT8(scllt, NPCM7xxSMBusState), + VMSTATE_UINT8(sclht, NPCM7xxSMBusState), + VMSTATE_END_OF_LIST(), + }, +}; + +static void npcm7xx_smbus_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx System Management Bus"; + dc->vmsd = &vmstate_npcm7xx_smbus; + rc->phases.enter = npcm7xx_smbus_enter_reset; + rc->phases.hold = npcm7xx_smbus_hold_reset; +} + +static const TypeInfo npcm7xx_smbus_types[] = { + { + .name = TYPE_NPCM7XX_SMBUS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxSMBusState), + .class_init = npcm7xx_smbus_class_init, + .instance_init = npcm7xx_smbus_init, + }, +}; +DEFINE_TYPES(npcm7xx_smbus_types); diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/meson.build +++ b/hw/i2c/meson.build @@ -XXX,XX +XXX,XX @@ i2c_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_i2c.c')) i2c_ss.add(when: 'CONFIG_IMX_I2C', if_true: files('imx_i2c.c')) i2c_ss.add(when: 'CONFIG_MPC_I2C', if_true: files('mpc_i2c.c')) i2c_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('microbit_i2c.c')) +i2c_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_smbus.c')) i2c_ss.add(when: 'CONFIG_SMBUS_EEPROM', if_true: files('smbus_eeprom.c')) i2c_ss.add(when: 'CONFIG_VERSATILE_I2C', if_true: files('versatile_i2c.c')) i2c_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_i2c.c')) diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_i2c_bus_read(uint32_t busid, uint64_t offset, unsigned size, uint64_t val aspeed_i2c_bus_write(uint32_t busid, uint64_t offset, unsigned size, uint64_t value) "bus[%d]: To 0x%" PRIx64 " of size %u: 0x%" PRIx64 aspeed_i2c_bus_send(const char *mode, int i, int count, uint8_t byte) "%s send %d/%d 0x%02x" aspeed_i2c_bus_recv(const char *mode, int i, int count, uint8_t byte) "%s recv %d/%d 0x%02x" + +# npcm7xx_smbus.c + +npcm7xx_smbus_read(const char *id, uint64_t offset, uint64_t value, unsigned size) "%s offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" +npcm7xx_smbus_write(const char *id, uint64_t offset, uint64_t value, unsigned size) "%s offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" +npcm7xx_smbus_start(const char *id, int success) "%s starting, success: %d" +npcm7xx_smbus_send_address(const char *id, uint8_t addr, int recv, int success) "%s sending address: 0x%02x, recv: %d, success: %d" +npcm7xx_smbus_send_byte(const char *id, uint8_t value, int success) "%s send byte: 0x%02x, success: %d" +npcm7xx_smbus_recv_byte(const char *id, uint8_t value) "%s recv byte: 0x%02x" +npcm7xx_smbus_stop(const char *id) "%s stopping" +npcm7xx_smbus_nack(const char *id) "%s nacking" -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Add I2C temperature sensors for NPCM750 eval board. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210210220426.3577804-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/npcm7xx_boards.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ static NPCM7xxState *npcm7xx_create_soc(MachineState *machine, return NPCM7XX(obj); } +static I2CBus *npcm7xx_i2c_get_bus(NPCM7xxState *soc, uint32_t num) +{ + g_assert(num < ARRAY_SIZE(soc->smbus)); + return I2C_BUS(qdev_get_child_bus(DEVICE(&soc->smbus[num]), "i2c-bus")); +} + +static void npcm750_evb_i2c_init(NPCM7xxState *soc) +{ + /* lm75 temperature sensor on SVB, tmp105 is compatible */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 0), "tmp105", 0x48); + /* lm75 temperature sensor on EB, tmp105 is compatible */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 1), "tmp105", 0x48); + /* tmp100 temperature sensor on EB, tmp105 is compatible */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 2), "tmp105", 0x48); + /* tmp100 temperature sensor on SVB, tmp105 is compatible */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 6), "tmp105", 0x48); +} + static void npcm750_evb_init(MachineState *machine) { NPCM7xxState *soc; @@ -XXX,XX +XXX,XX @@ static void npcm750_evb_init(MachineState *machine) npcm7xx_load_bootrom(machine, soc); npcm7xx_connect_flash(&soc->fiu[0], 0, "w25q256", drive_get(IF_MTD, 0, 0)); + npcm750_evb_i2c_init(soc); npcm7xx_load_kernel(machine, soc); } -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Add AT24 EEPROM and temperature sensors for GSJ machine. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210210220426.3577804-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/npcm7xx_boards.c | 27 +++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + 2 files changed, 28 insertions(+) diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "hw/arm/npcm7xx.h" #include "hw/core/cpu.h" +#include "hw/i2c/smbus_eeprom.h" #include "hw/loader.h" #include "hw/qdev-properties.h" #include "qapi/error.h" @@ -XXX,XX +XXX,XX @@ static I2CBus *npcm7xx_i2c_get_bus(NPCM7xxState *soc, uint32_t num) return I2C_BUS(qdev_get_child_bus(DEVICE(&soc->smbus[num]), "i2c-bus")); } +static void at24c_eeprom_init(NPCM7xxState *soc, int bus, uint8_t addr, + uint32_t rsize) +{ + I2CBus *i2c_bus = npcm7xx_i2c_get_bus(soc, bus); + I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr); + DeviceState *dev = DEVICE(i2c_dev); + + qdev_prop_set_uint32(dev, "rom-size", rsize); + i2c_slave_realize_and_unref(i2c_dev, i2c_bus, &error_abort); +} + static void npcm750_evb_i2c_init(NPCM7xxState *soc) { /* lm75 temperature sensor on SVB, tmp105 is compatible */ @@ -XXX,XX +XXX,XX @@ static void npcm750_evb_i2c_init(NPCM7xxState *soc) i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 6), "tmp105", 0x48); } +static void quanta_gsj_i2c_init(NPCM7xxState *soc) +{ + /* GSJ machine have 4 max31725 temperature sensors, tmp105 is compatible. */ + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 1), "tmp105", 0x5c); + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 2), "tmp105", 0x5c); + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 3), "tmp105", 0x5c); + i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 4), "tmp105", 0x5c); + + at24c_eeprom_init(soc, 9, 0x55, 8192); + at24c_eeprom_init(soc, 10, 0x55, 8192); + + /* TODO: Add additional i2c devices. */ +} + static void npcm750_evb_init(MachineState *machine) { NPCM7xxState *soc; @@ -XXX,XX +XXX,XX @@ static void quanta_gsj_init(MachineState *machine) npcm7xx_load_bootrom(machine, soc); npcm7xx_connect_flash(&soc->fiu[0], 0, "mx25l25635e", drive_get(IF_MTD, 0, 0)); + quanta_gsj_i2c_init(soc); npcm7xx_load_kernel(machine, soc); } diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config NPCM7XX bool select A9MPCORE select ARM_GIC + select AT24C # EEPROM select PL310 # cache controller select SERIAL select SSI -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> This patch adds a QTest for NPCM7XX SMBus's single byte mode. It sends a byte to a device in the evaluation board, and verify the retrieved value is equivalent to the sent value. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210210220426.3577804-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_smbus-test.c | 352 +++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 353 insertions(+) create mode 100644 tests/qtest/npcm7xx_smbus-test.c diff --git a/tests/qtest/npcm7xx_smbus-test.c b/tests/qtest/npcm7xx_smbus-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_smbus-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx SMBus Modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/bitops.h" +#include "libqos/i2c.h" +#include "libqos/libqtest.h" +#include "hw/misc/tmp105_regs.h" + +#define NR_SMBUS_DEVICES 16 +#define SMBUS_ADDR(x) (0xf0080000 + 0x1000 * (x)) +#define SMBUS_IRQ(x) (64 + (x)) + +#define EVB_DEVICE_ADDR 0x48 +#define INVALID_DEVICE_ADDR 0x01 + +const int evb_bus_list[] = {0, 1, 2, 6}; + +/* Offsets */ +enum CommonRegister { + OFFSET_SDA = 0x0, + OFFSET_ST = 0x2, + OFFSET_CST = 0x4, + OFFSET_CTL1 = 0x6, + OFFSET_ADDR1 = 0x8, + OFFSET_CTL2 = 0xa, + OFFSET_ADDR2 = 0xc, + OFFSET_CTL3 = 0xe, + OFFSET_CST2 = 0x18, + OFFSET_CST3 = 0x19, +}; + +enum NPCM7xxSMBusBank0Register { + OFFSET_ADDR3 = 0x10, + OFFSET_ADDR7 = 0x11, + OFFSET_ADDR4 = 0x12, + OFFSET_ADDR8 = 0x13, + OFFSET_ADDR5 = 0x14, + OFFSET_ADDR9 = 0x15, + OFFSET_ADDR6 = 0x16, + OFFSET_ADDR10 = 0x17, + OFFSET_CTL4 = 0x1a, + OFFSET_CTL5 = 0x1b, + OFFSET_SCLLT = 0x1c, + OFFSET_FIF_CTL = 0x1d, + OFFSET_SCLHT = 0x1e, +}; + +enum NPCM7xxSMBusBank1Register { + OFFSET_FIF_CTS = 0x10, + OFFSET_FAIR_PER = 0x11, + OFFSET_TXF_CTL = 0x12, + OFFSET_T_OUT = 0x14, + OFFSET_TXF_STS = 0x1a, + OFFSET_RXF_STS = 0x1c, + OFFSET_RXF_CTL = 0x1e, +}; + +/* ST fields */ +#define ST_STP BIT(7) +#define ST_SDAST BIT(6) +#define ST_BER BIT(5) +#define ST_NEGACK BIT(4) +#define ST_STASTR BIT(3) +#define ST_NMATCH BIT(2) +#define ST_MODE BIT(1) +#define ST_XMIT BIT(0) + +/* CST fields */ +#define CST_ARPMATCH BIT(7) +#define CST_MATCHAF BIT(6) +#define CST_TGSCL BIT(5) +#define CST_TSDA BIT(4) +#define CST_GCMATCH BIT(3) +#define CST_MATCH BIT(2) +#define CST_BB BIT(1) +#define CST_BUSY BIT(0) + +/* CST2 fields */ +#define CST2_INSTTS BIT(7) +#define CST2_MATCH7F BIT(6) +#define CST2_MATCH6F BIT(5) +#define CST2_MATCH5F BIT(4) +#define CST2_MATCH4F BIT(3) +#define CST2_MATCH3F BIT(2) +#define CST2_MATCH2F BIT(1) +#define CST2_MATCH1F BIT(0) + +/* CST3 fields */ +#define CST3_EO_BUSY BIT(7) +#define CST3_MATCH10F BIT(2) +#define CST3_MATCH9F BIT(1) +#define CST3_MATCH8F BIT(0) + +/* CTL1 fields */ +#define CTL1_STASTRE BIT(7) +#define CTL1_NMINTE BIT(6) +#define CTL1_GCMEN BIT(5) +#define CTL1_ACK BIT(4) +#define CTL1_EOBINTE BIT(3) +#define CTL1_INTEN BIT(2) +#define CTL1_STOP BIT(1) +#define CTL1_START BIT(0) + +/* CTL2 fields */ +#define CTL2_SCLFRQ(rv) extract8((rv), 1, 6) +#define CTL2_ENABLE BIT(0) + +/* CTL3 fields */ +#define CTL3_SCL_LVL BIT(7) +#define CTL3_SDA_LVL BIT(6) +#define CTL3_BNK_SEL BIT(5) +#define CTL3_400K_MODE BIT(4) +#define CTL3_IDL_START BIT(3) +#define CTL3_ARPMEN BIT(2) +#define CTL3_SCLFRQ(rv) extract8((rv), 0, 2) + +/* ADDR fields */ +#define ADDR_EN BIT(7) +#define ADDR_A(rv) extract8((rv), 0, 6) + + +static void check_running(QTestState *qts, uint64_t base_addr) +{ + g_assert_true(qtest_readb(qts, base_addr + OFFSET_CST) & CST_BUSY); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_CST) & CST_BB); +} + +static void check_stopped(QTestState *qts, uint64_t base_addr) +{ + uint8_t cst3; + + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, 0); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_CST) & CST_BUSY); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_CST) & CST_BB); + + cst3 = qtest_readb(qts, base_addr + OFFSET_CST3); + g_assert_true(cst3 & CST3_EO_BUSY); + qtest_writeb(qts, base_addr + OFFSET_CST3, cst3); + cst3 = qtest_readb(qts, base_addr + OFFSET_CST3); + g_assert_false(cst3 & CST3_EO_BUSY); +} + +static void enable_bus(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl2 = qtest_readb(qts, base_addr + OFFSET_CTL2); + + ctl2 |= CTL2_ENABLE; + qtest_writeb(qts, base_addr + OFFSET_CTL2, ctl2); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_CTL2) & CTL2_ENABLE); +} + +static void disable_bus(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl2 = qtest_readb(qts, base_addr + OFFSET_CTL2); + + ctl2 &= ~CTL2_ENABLE; + qtest_writeb(qts, base_addr + OFFSET_CTL2, ctl2); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_CTL2) & CTL2_ENABLE); +} + +static void start_transfer(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl1; + + ctl1 = CTL1_START | CTL1_INTEN | CTL1_STASTRE; + qtest_writeb(qts, base_addr + OFFSET_CTL1, ctl1); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_CTL1), ==, + CTL1_INTEN | CTL1_STASTRE | CTL1_INTEN); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, + ST_MODE | ST_XMIT | ST_SDAST); + check_running(qts, base_addr); +} + +static void stop_transfer(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl1 = qtest_readb(qts, base_addr + OFFSET_CTL1); + + ctl1 &= ~(CTL1_START | CTL1_ACK); + ctl1 |= CTL1_STOP | CTL1_INTEN | CTL1_EOBINTE; + qtest_writeb(qts, base_addr + OFFSET_CTL1, ctl1); + ctl1 = qtest_readb(qts, base_addr + OFFSET_CTL1); + g_assert_false(ctl1 & CTL1_STOP); +} + +static void send_byte(QTestState *qts, uint64_t base_addr, uint8_t byte) +{ + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, + ST_MODE | ST_XMIT | ST_SDAST); + qtest_writeb(qts, base_addr + OFFSET_SDA, byte); +} + +static uint8_t recv_byte(QTestState *qts, uint64_t base_addr) +{ + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, + ST_MODE | ST_SDAST); + return qtest_readb(qts, base_addr + OFFSET_SDA); +} + +static void send_address(QTestState *qts, uint64_t base_addr, uint8_t addr, + bool recv, bool valid) +{ + uint8_t encoded_addr = (addr << 1) | (recv ? 1 : 0); + uint8_t st; + + qtest_writeb(qts, base_addr + OFFSET_SDA, encoded_addr); + st = qtest_readb(qts, base_addr + OFFSET_ST); + + if (valid) { + if (recv) { + g_assert_cmphex(st, ==, ST_MODE | ST_SDAST | ST_STASTR); + } else { + g_assert_cmphex(st, ==, ST_MODE | ST_XMIT | ST_SDAST | ST_STASTR); + } + + qtest_writeb(qts, base_addr + OFFSET_ST, ST_STASTR); + st = qtest_readb(qts, base_addr + OFFSET_ST); + if (recv) { + g_assert_cmphex(st, ==, ST_MODE | ST_SDAST); + } else { + g_assert_cmphex(st, ==, ST_MODE | ST_XMIT | ST_SDAST); + } + } else { + if (recv) { + g_assert_cmphex(st, ==, ST_MODE | ST_NEGACK); + } else { + g_assert_cmphex(st, ==, ST_MODE | ST_XMIT | ST_NEGACK); + } + } +} + +static void send_nack(QTestState *qts, uint64_t base_addr) +{ + uint8_t ctl1 = qtest_readb(qts, base_addr + OFFSET_CTL1); + + ctl1 &= ~(CTL1_START | CTL1_STOP); + ctl1 |= CTL1_ACK | CTL1_INTEN; + qtest_writeb(qts, base_addr + OFFSET_CTL1, ctl1); +} + +/* Check the SMBus's status is set correctly when disabled. */ +static void test_disable_bus(gconstpointer data) +{ + intptr_t index = (intptr_t)data; + uint64_t base_addr = SMBUS_ADDR(index); + QTestState *qts = qtest_init("-machine npcm750-evb"); + + disable_bus(qts, base_addr); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_CTL1), ==, 0); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, 0); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_CST3) & CST3_EO_BUSY); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_CST), ==, 0); + qtest_quit(qts); +} + +/* Check the SMBus returns a NACK for an invalid address. */ +static void test_invalid_addr(gconstpointer data) +{ + intptr_t index = (intptr_t)data; + uint64_t base_addr = SMBUS_ADDR(index); + int irq = SMBUS_IRQ(index); + QTestState *qts = qtest_init("-machine npcm750-evb"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + enable_bus(qts, base_addr); + g_assert_false(qtest_get_irq(qts, irq)); + start_transfer(qts, base_addr); + send_address(qts, base_addr, INVALID_DEVICE_ADDR, false, false); + g_assert_true(qtest_get_irq(qts, irq)); + stop_transfer(qts, base_addr); + check_running(qts, base_addr); + qtest_writeb(qts, base_addr + OFFSET_ST, ST_NEGACK); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_ST) & ST_NEGACK); + check_stopped(qts, base_addr); + qtest_quit(qts); +} + +/* Check the SMBus can send and receive bytes to a device in single mode. */ +static void test_single_mode(gconstpointer data) +{ + intptr_t index = (intptr_t)data; + uint64_t base_addr = SMBUS_ADDR(index); + int irq = SMBUS_IRQ(index); + uint8_t value = 0x60; + QTestState *qts = qtest_init("-machine npcm750-evb"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + enable_bus(qts, base_addr); + + /* Sending */ + g_assert_false(qtest_get_irq(qts, irq)); + start_transfer(qts, base_addr); + g_assert_true(qtest_get_irq(qts, irq)); + send_address(qts, base_addr, EVB_DEVICE_ADDR, false, true); + send_byte(qts, base_addr, TMP105_REG_CONFIG); + send_byte(qts, base_addr, value); + stop_transfer(qts, base_addr); + check_stopped(qts, base_addr); + + /* Receiving */ + start_transfer(qts, base_addr); + send_address(qts, base_addr, EVB_DEVICE_ADDR, false, true); + send_byte(qts, base_addr, TMP105_REG_CONFIG); + start_transfer(qts, base_addr); + send_address(qts, base_addr, EVB_DEVICE_ADDR, true, true); + send_nack(qts, base_addr); + stop_transfer(qts, base_addr); + check_running(qts, base_addr); + g_assert_cmphex(recv_byte(qts, base_addr), ==, value); + check_stopped(qts, base_addr); + qtest_quit(qts); +} + +static void smbus_add_test(const char *name, int index, GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf( + "npcm7xx_smbus[%d]/%s", index, name); + qtest_add_data_func(full_name, (void *)(intptr_t)index, fn); +} +#define add_test(name, td) smbus_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + int i; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + for (i = 0; i < NR_SMBUS_DEVICES; ++i) { + add_test(disable_bus, i); + add_test(invalid_addr, i); + } + + for (i = 0; i < ARRAY_SIZE(evb_bus_list); ++i) { + add_test(single_mode, evb_bus_list[i]); + } + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_gpio-test', 'npcm7xx_pwm-test', 'npcm7xx_rng-test', + 'npcm7xx_smbus-test', 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> This patch implements the FIFO mode of the SMBus module. In FIFO, the user transmits or receives at most 16 bytes at a time. The FIFO mode allows the module to transmit large amount of data faster than single byte mode. Since we only added the device in a patch that is only a few commits away in the same patch set. We do not increase the VMstate version number in this special case. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-6-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/npcm7xx_smbus.h | 25 +++ hw/i2c/npcm7xx_smbus.c | 342 +++++++++++++++++++++++++++++-- tests/qtest/npcm7xx_smbus-test.c | 149 +++++++++++++- hw/i2c/trace-events | 1 + 4 files changed, 501 insertions(+), 16 deletions(-) diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/npcm7xx_smbus.h +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_SMBUS_NR_ADDRS 10 +/* Size of the FIFO buffer. */ +#define NPCM7XX_SMBUS_FIFO_SIZE 16 + typedef enum NPCM7xxSMBusStatus { NPCM7XX_SMBUS_STATUS_IDLE, NPCM7XX_SMBUS_STATUS_SENDING, @@ -XXX,XX +XXX,XX @@ typedef enum NPCM7xxSMBusStatus { * @addr: The SMBus module's own addresses on the I2C bus. * @scllt: The SCL low time register. * @sclht: The SCL high time register. + * @fif_ctl: The FIFO control register. + * @fif_cts: The FIFO control status register. + * @fair_per: The fair preriod register. + * @txf_ctl: The transmit FIFO control register. + * @t_out: The SMBus timeout register. + * @txf_sts: The transmit FIFO status register. + * @rxf_sts: The receive FIFO status register. + * @rxf_ctl: The receive FIFO control register. + * @rx_fifo: The FIFO buffer for receiving in FIFO mode. + * @rx_cur: The current position of rx_fifo. * @status: The current status of the SMBus. */ typedef struct NPCM7xxSMBusState { @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSMBusState { uint8_t scllt; uint8_t sclht; + uint8_t fif_ctl; + uint8_t fif_cts; + uint8_t fair_per; + uint8_t txf_ctl; + uint8_t t_out; + uint8_t txf_sts; + uint8_t rxf_sts; + uint8_t rxf_ctl; + + uint8_t rx_fifo[NPCM7XX_SMBUS_FIFO_SIZE]; + uint8_t rx_cur; + NPCM7xxSMBusStatus status; } NPCM7xxSMBusState; diff --git a/hw/i2c/npcm7xx_smbus.c b/hw/i2c/npcm7xx_smbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/npcm7xx_smbus.c +++ b/hw/i2c/npcm7xx_smbus.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxSMBusBank1Register { #define NPCM7XX_ADDR_EN BIT(7) #define NPCM7XX_ADDR_A(rv) extract8((rv), 0, 6) +/* FIFO Mode Register Fields */ +/* FIF_CTL fields */ +#define NPCM7XX_SMBFIF_CTL_FIFO_EN BIT(4) +#define NPCM7XX_SMBFIF_CTL_FAIR_RDY_IE BIT(2) +#define NPCM7XX_SMBFIF_CTL_FAIR_RDY BIT(1) +#define NPCM7XX_SMBFIF_CTL_FAIR_BUSY BIT(0) +/* FIF_CTS fields */ +#define NPCM7XX_SMBFIF_CTS_STR BIT(7) +#define NPCM7XX_SMBFIF_CTS_CLR_FIFO BIT(6) +#define NPCM7XX_SMBFIF_CTS_RFTE_IE BIT(3) +#define NPCM7XX_SMBFIF_CTS_RXF_TXE BIT(1) +/* TXF_CTL fields */ +#define NPCM7XX_SMBTXF_CTL_THR_TXIE BIT(6) +#define NPCM7XX_SMBTXF_CTL_TX_THR(rv) extract8((rv), 0, 5) +/* T_OUT fields */ +#define NPCM7XX_SMBT_OUT_ST BIT(7) +#define NPCM7XX_SMBT_OUT_IE BIT(6) +#define NPCM7XX_SMBT_OUT_CLKDIV(rv) extract8((rv), 0, 6) +/* TXF_STS fields */ +#define NPCM7XX_SMBTXF_STS_TX_THST BIT(6) +#define NPCM7XX_SMBTXF_STS_TX_BYTES(rv) extract8((rv), 0, 5) +/* RXF_STS fields */ +#define NPCM7XX_SMBRXF_STS_RX_THST BIT(6) +#define NPCM7XX_SMBRXF_STS_RX_BYTES(rv) extract8((rv), 0, 5) +/* RXF_CTL fields */ +#define NPCM7XX_SMBRXF_CTL_THR_RXIE BIT(6) +#define NPCM7XX_SMBRXF_CTL_LAST BIT(5) +#define NPCM7XX_SMBRXF_CTL_RX_THR(rv) extract8((rv), 0, 5) + #define KEEP_OLD_BIT(o, n, b) (((n) & (~(b))) | ((o) & (b))) #define WRITE_ONE_CLEAR(o, n, b) ((n) & (b) ? (o) & (~(b)) : (o)) #define NPCM7XX_SMBUS_ENABLED(s) ((s)->ctl2 & NPCM7XX_SMBCTL2_ENABLE) +#define NPCM7XX_SMBUS_FIFO_ENABLED(s) ((s)->fif_ctl & \ + NPCM7XX_SMBFIF_CTL_FIFO_EN) /* VERSION fields values, read-only. */ #define NPCM7XX_SMBUS_VERSION_NUMBER 1 -#define NPCM7XX_SMBUS_VERSION_FIFO_SUPPORTED 0 +#define NPCM7XX_SMBUS_VERSION_FIFO_SUPPORTED 1 /* Reset values */ #define NPCM7XX_SMB_ST_INIT_VAL 0x00 @@ -XXX,XX +XXX,XX @@ enum NPCM7xxSMBusBank1Register { #define NPCM7XX_SMB_ADDR_INIT_VAL 0x00 #define NPCM7XX_SMB_SCLLT_INIT_VAL 0x00 #define NPCM7XX_SMB_SCLHT_INIT_VAL 0x00 +#define NPCM7XX_SMB_FIF_CTL_INIT_VAL 0x00 +#define NPCM7XX_SMB_FIF_CTS_INIT_VAL 0x00 +#define NPCM7XX_SMB_FAIR_PER_INIT_VAL 0x00 +#define NPCM7XX_SMB_TXF_CTL_INIT_VAL 0x00 +#define NPCM7XX_SMB_T_OUT_INIT_VAL 0x3f +#define NPCM7XX_SMB_TXF_STS_INIT_VAL 0x00 +#define NPCM7XX_SMB_RXF_STS_INIT_VAL 0x00 +#define NPCM7XX_SMB_RXF_CTL_INIT_VAL 0x01 static uint8_t npcm7xx_smbus_get_version(void) { @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_update_irq(NPCM7xxSMBusState *s) (s->ctl1 & NPCM7XX_SMBCTL1_STASTRE && s->st & NPCM7XX_SMBST_SDAST) || (s->ctl1 & NPCM7XX_SMBCTL1_EOBINTE && - s->cst3 & NPCM7XX_SMBCST3_EO_BUSY)); + s->cst3 & NPCM7XX_SMBCST3_EO_BUSY) || + (s->rxf_ctl & NPCM7XX_SMBRXF_CTL_THR_RXIE && + s->rxf_sts & NPCM7XX_SMBRXF_STS_RX_THST) || + (s->txf_ctl & NPCM7XX_SMBTXF_CTL_THR_TXIE && + s->txf_sts & NPCM7XX_SMBTXF_STS_TX_THST) || + (s->fif_cts & NPCM7XX_SMBFIF_CTS_RFTE_IE && + s->fif_cts & NPCM7XX_SMBFIF_CTS_RXF_TXE)); if (level) { s->cst2 |= NPCM7XX_SMBCST2_INTSTS; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_nack(NPCM7xxSMBusState *s) s->status = NPCM7XX_SMBUS_STATUS_NEGACK; } +static void npcm7xx_smbus_clear_buffer(NPCM7xxSMBusState *s) +{ + s->fif_cts &= ~NPCM7XX_SMBFIF_CTS_RXF_TXE; + s->txf_sts = 0; + s->rxf_sts = 0; +} + static void npcm7xx_smbus_send_byte(NPCM7xxSMBusState *s, uint8_t value) { int rv = i2c_send(s->bus, value); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_send_byte(NPCM7xxSMBusState *s, uint8_t value) npcm7xx_smbus_nack(s); } else { s->st |= NPCM7XX_SMBST_SDAST; + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + s->fif_cts |= NPCM7XX_SMBFIF_CTS_RXF_TXE; + if (NPCM7XX_SMBTXF_STS_TX_BYTES(s->txf_sts) == + NPCM7XX_SMBTXF_CTL_TX_THR(s->txf_ctl)) { + s->txf_sts = NPCM7XX_SMBTXF_STS_TX_THST; + } else { + s->txf_sts = 0; + } + } } trace_npcm7xx_smbus_send_byte((DEVICE(s)->canonical_path), value, !rv); npcm7xx_smbus_update_irq(s); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_recv_byte(NPCM7xxSMBusState *s) npcm7xx_smbus_update_irq(s); } +static void npcm7xx_smbus_recv_fifo(NPCM7xxSMBusState *s) +{ + uint8_t expected_bytes = NPCM7XX_SMBRXF_CTL_RX_THR(s->rxf_ctl); + uint8_t received_bytes = NPCM7XX_SMBRXF_STS_RX_BYTES(s->rxf_sts); + uint8_t pos; + + if (received_bytes == expected_bytes) { + return; + } + + while (received_bytes < expected_bytes && + received_bytes < NPCM7XX_SMBUS_FIFO_SIZE) { + pos = (s->rx_cur + received_bytes) % NPCM7XX_SMBUS_FIFO_SIZE; + s->rx_fifo[pos] = i2c_recv(s->bus); + trace_npcm7xx_smbus_recv_byte((DEVICE(s)->canonical_path), + s->rx_fifo[pos]); + ++received_bytes; + } + + trace_npcm7xx_smbus_recv_fifo((DEVICE(s)->canonical_path), + received_bytes, expected_bytes); + s->rxf_sts = received_bytes; + if (unlikely(received_bytes < expected_bytes)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid rx_thr value: 0x%02x\n", + DEVICE(s)->canonical_path, expected_bytes); + return; + } + + s->rxf_sts |= NPCM7XX_SMBRXF_STS_RX_THST; + if (s->rxf_ctl & NPCM7XX_SMBRXF_CTL_LAST) { + trace_npcm7xx_smbus_nack(DEVICE(s)->canonical_path); + i2c_nack(s->bus); + s->rxf_ctl &= ~NPCM7XX_SMBRXF_CTL_LAST; + } + if (received_bytes == NPCM7XX_SMBUS_FIFO_SIZE) { + s->st |= NPCM7XX_SMBST_SDAST; + s->fif_cts |= NPCM7XX_SMBFIF_CTS_RXF_TXE; + } else if (!(s->rxf_ctl & NPCM7XX_SMBRXF_CTL_THR_RXIE)) { + s->st |= NPCM7XX_SMBST_SDAST; + } else { + s->st &= ~NPCM7XX_SMBST_SDAST; + } + npcm7xx_smbus_update_irq(s); +} + +static void npcm7xx_smbus_read_byte_fifo(NPCM7xxSMBusState *s) +{ + uint8_t received_bytes = NPCM7XX_SMBRXF_STS_RX_BYTES(s->rxf_sts); + + if (received_bytes == 0) { + npcm7xx_smbus_recv_fifo(s); + return; + } + + s->sda = s->rx_fifo[s->rx_cur]; + s->rx_cur = (s->rx_cur + 1u) % NPCM7XX_SMBUS_FIFO_SIZE; + --s->rxf_sts; + npcm7xx_smbus_update_irq(s); +} + static void npcm7xx_smbus_start(NPCM7xxSMBusState *s) { /* @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_start(NPCM7xxSMBusState *s) if (available) { s->st |= NPCM7XX_SMBST_MODE | NPCM7XX_SMBST_XMIT | NPCM7XX_SMBST_SDAST; s->cst |= NPCM7XX_SMBCST_BUSY; + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + s->fif_cts |= NPCM7XX_SMBFIF_CTS_RXF_TXE; + } } else { s->st &= ~NPCM7XX_SMBST_MODE; s->cst &= ~NPCM7XX_SMBCST_BUSY; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_send_address(NPCM7xxSMBusState *s, uint8_t value) s->st |= NPCM7XX_SMBST_SDAST; } } else if (recv) { - npcm7xx_smbus_recv_byte(s); + s->st |= NPCM7XX_SMBST_SDAST; + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + npcm7xx_smbus_recv_fifo(s); + } else { + npcm7xx_smbus_recv_byte(s); + } + } else if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + s->st |= NPCM7XX_SMBST_SDAST; + s->fif_cts |= NPCM7XX_SMBFIF_CTS_RXF_TXE; } npcm7xx_smbus_update_irq(s); } @@ -XXX,XX +XXX,XX @@ static uint8_t npcm7xx_smbus_read_sda(NPCM7xxSMBusState *s) switch (s->status) { case NPCM7XX_SMBUS_STATUS_STOPPING_LAST_RECEIVE: - npcm7xx_smbus_execute_stop(s); + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + if (NPCM7XX_SMBRXF_STS_RX_BYTES(s->rxf_sts) <= 1) { + npcm7xx_smbus_execute_stop(s); + } + if (NPCM7XX_SMBRXF_STS_RX_BYTES(s->rxf_sts) == 0) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read to SDA with an empty rx-fifo buffer, " + "result undefined: %u\n", + DEVICE(s)->canonical_path, s->sda); + break; + } + npcm7xx_smbus_read_byte_fifo(s); + value = s->sda; + } else { + npcm7xx_smbus_execute_stop(s); + } break; case NPCM7XX_SMBUS_STATUS_RECEIVING: - npcm7xx_smbus_recv_byte(s); + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + npcm7xx_smbus_read_byte_fifo(s); + value = s->sda; + } else { + npcm7xx_smbus_recv_byte(s); + } break; default: @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write_st(NPCM7xxSMBusState *s, uint8_t value) } if (value & NPCM7XX_SMBST_STASTR && - s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) { - npcm7xx_smbus_recv_byte(s); + s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) { + if (NPCM7XX_SMBUS_FIFO_ENABLED(s)) { + npcm7xx_smbus_recv_fifo(s); + } else { + npcm7xx_smbus_recv_byte(s); + } } npcm7xx_smbus_update_irq(s); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write_ctl2(NPCM7xxSMBusState *s, uint8_t value) s->st = 0; s->cst3 = s->cst3 & (~NPCM7XX_SMBCST3_EO_BUSY); s->cst = 0; + npcm7xx_smbus_clear_buffer(s); } } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write_ctl3(NPCM7xxSMBusState *s, uint8_t value) NPCM7XX_SMBCTL3_SCL_LVL | NPCM7XX_SMBCTL3_SDA_LVL); } +static void npcm7xx_smbus_write_fif_ctl(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t new_ctl = value; + + new_ctl = KEEP_OLD_BIT(s->fif_ctl, new_ctl, NPCM7XX_SMBFIF_CTL_FAIR_RDY); + new_ctl = WRITE_ONE_CLEAR(new_ctl, value, NPCM7XX_SMBFIF_CTL_FAIR_RDY); + new_ctl = KEEP_OLD_BIT(s->fif_ctl, new_ctl, NPCM7XX_SMBFIF_CTL_FAIR_BUSY); + s->fif_ctl = new_ctl; +} + +static void npcm7xx_smbus_write_fif_cts(NPCM7xxSMBusState *s, uint8_t value) +{ + s->fif_cts = WRITE_ONE_CLEAR(s->fif_cts, value, NPCM7XX_SMBFIF_CTS_STR); + s->fif_cts = WRITE_ONE_CLEAR(s->fif_cts, value, NPCM7XX_SMBFIF_CTS_RXF_TXE); + s->fif_cts = KEEP_OLD_BIT(value, s->fif_cts, NPCM7XX_SMBFIF_CTS_RFTE_IE); + + if (value & NPCM7XX_SMBFIF_CTS_CLR_FIFO) { + npcm7xx_smbus_clear_buffer(s); + } +} + +static void npcm7xx_smbus_write_txf_ctl(NPCM7xxSMBusState *s, uint8_t value) +{ + s->txf_ctl = value; +} + +static void npcm7xx_smbus_write_t_out(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t new_t_out = value; + + if ((value & NPCM7XX_SMBT_OUT_ST) || (!(s->t_out & NPCM7XX_SMBT_OUT_ST))) { + new_t_out &= ~NPCM7XX_SMBT_OUT_ST; + } else { + new_t_out |= NPCM7XX_SMBT_OUT_ST; + } + + s->t_out = new_t_out; +} + +static void npcm7xx_smbus_write_txf_sts(NPCM7xxSMBusState *s, uint8_t value) +{ + s->txf_sts = WRITE_ONE_CLEAR(s->txf_sts, value, NPCM7XX_SMBTXF_STS_TX_THST); +} + +static void npcm7xx_smbus_write_rxf_sts(NPCM7xxSMBusState *s, uint8_t value) +{ + if (value & NPCM7XX_SMBRXF_STS_RX_THST) { + s->rxf_sts &= ~NPCM7XX_SMBRXF_STS_RX_THST; + if (s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) { + npcm7xx_smbus_recv_fifo(s); + } + } +} + +static void npcm7xx_smbus_write_rxf_ctl(NPCM7xxSMBusState *s, uint8_t value) +{ + uint8_t new_ctl = value; + + if (!(value & NPCM7XX_SMBRXF_CTL_LAST)) { + new_ctl = KEEP_OLD_BIT(s->rxf_ctl, new_ctl, NPCM7XX_SMBRXF_CTL_LAST); + } + s->rxf_ctl = new_ctl; +} + static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size) { NPCM7xxSMBusState *s = opaque; @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size) default: if (bank) { /* Bank 1 */ - qemu_log_mask(LOG_GUEST_ERROR, - "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", - DEVICE(s)->canonical_path, offset); + switch (offset) { + case NPCM7XX_SMB_FIF_CTS: + value = s->fif_cts; + break; + + case NPCM7XX_SMB_FAIR_PER: + value = s->fair_per; + break; + + case NPCM7XX_SMB_TXF_CTL: + value = s->txf_ctl; + break; + + case NPCM7XX_SMB_T_OUT: + value = s->t_out; + break; + + case NPCM7XX_SMB_TXF_STS: + value = s->txf_sts; + break; + + case NPCM7XX_SMB_RXF_STS: + value = s->rxf_sts; + break; + + case NPCM7XX_SMB_RXF_CTL: + value = s->rxf_ctl; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } } else { /* Bank 0 */ switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size) value = s->scllt; break; + case NPCM7XX_SMB_FIF_CTL: + value = s->fif_ctl; + break; + case NPCM7XX_SMB_SCLHT: value = s->sclht; break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write(void *opaque, hwaddr offset, uint64_t value, default: if (bank) { /* Bank 1 */ - qemu_log_mask(LOG_GUEST_ERROR, - "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", - DEVICE(s)->canonical_path, offset); + switch (offset) { + case NPCM7XX_SMB_FIF_CTS: + npcm7xx_smbus_write_fif_cts(s, value); + break; + + case NPCM7XX_SMB_FAIR_PER: + s->fair_per = value; + break; + + case NPCM7XX_SMB_TXF_CTL: + npcm7xx_smbus_write_txf_ctl(s, value); + break; + + case NPCM7XX_SMB_T_OUT: + npcm7xx_smbus_write_t_out(s, value); + break; + + case NPCM7XX_SMB_TXF_STS: + npcm7xx_smbus_write_txf_sts(s, value); + break; + + case NPCM7XX_SMB_RXF_STS: + npcm7xx_smbus_write_rxf_sts(s, value); + break; + + case NPCM7XX_SMB_RXF_CTL: + npcm7xx_smbus_write_rxf_ctl(s, value); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } } else { /* Bank 0 */ switch (offset) { @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_write(void *opaque, hwaddr offset, uint64_t value, s->scllt = value; break; + case NPCM7XX_SMB_FIF_CTL: + npcm7xx_smbus_write_fif_ctl(s, value); + break; + case NPCM7XX_SMB_SCLHT: s->sclht = value; break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_enter_reset(Object *obj, ResetType type) s->scllt = NPCM7XX_SMB_SCLLT_INIT_VAL; s->sclht = NPCM7XX_SMB_SCLHT_INIT_VAL; + s->fif_ctl = NPCM7XX_SMB_FIF_CTL_INIT_VAL; + s->fif_cts = NPCM7XX_SMB_FIF_CTS_INIT_VAL; + s->fair_per = NPCM7XX_SMB_FAIR_PER_INIT_VAL; + s->txf_ctl = NPCM7XX_SMB_TXF_CTL_INIT_VAL; + s->t_out = NPCM7XX_SMB_T_OUT_INIT_VAL; + s->txf_sts = NPCM7XX_SMB_TXF_STS_INIT_VAL; + s->rxf_sts = NPCM7XX_SMB_RXF_STS_INIT_VAL; + s->rxf_ctl = NPCM7XX_SMB_RXF_CTL_INIT_VAL; + + npcm7xx_smbus_clear_buffer(s); s->status = NPCM7XX_SMBUS_STATUS_IDLE; + s->rx_cur = 0; } static void npcm7xx_smbus_hold_reset(Object *obj) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_smbus = { VMSTATE_UINT8_ARRAY(addr, NPCM7xxSMBusState, NPCM7XX_SMBUS_NR_ADDRS), VMSTATE_UINT8(scllt, NPCM7xxSMBusState), VMSTATE_UINT8(sclht, NPCM7xxSMBusState), + VMSTATE_UINT8(fif_ctl, NPCM7xxSMBusState), + VMSTATE_UINT8(fif_cts, NPCM7xxSMBusState), + VMSTATE_UINT8(fair_per, NPCM7xxSMBusState), + VMSTATE_UINT8(txf_ctl, NPCM7xxSMBusState), + VMSTATE_UINT8(t_out, NPCM7xxSMBusState), + VMSTATE_UINT8(txf_sts, NPCM7xxSMBusState), + VMSTATE_UINT8(rxf_sts, NPCM7xxSMBusState), + VMSTATE_UINT8(rxf_ctl, NPCM7xxSMBusState), + VMSTATE_UINT8_ARRAY(rx_fifo, NPCM7xxSMBusState, + NPCM7XX_SMBUS_FIFO_SIZE), + VMSTATE_UINT8(rx_cur, NPCM7xxSMBusState), VMSTATE_END_OF_LIST(), }, }; diff --git a/tests/qtest/npcm7xx_smbus-test.c b/tests/qtest/npcm7xx_smbus-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_smbus-test.c +++ b/tests/qtest/npcm7xx_smbus-test.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxSMBusBank1Register { #define ADDR_EN BIT(7) #define ADDR_A(rv) extract8((rv), 0, 6) +/* FIF_CTL fields */ +#define FIF_CTL_FIFO_EN BIT(4) + +/* FIF_CTS fields */ +#define FIF_CTS_CLR_FIFO BIT(6) +#define FIF_CTS_RFTE_IE BIT(3) +#define FIF_CTS_RXF_TXE BIT(1) + +/* TXF_CTL fields */ +#define TXF_CTL_THR_TXIE BIT(6) +#define TXF_CTL_TX_THR(rv) extract8((rv), 0, 5) + +/* TXF_STS fields */ +#define TXF_STS_TX_THST BIT(6) +#define TXF_STS_TX_BYTES(rv) extract8((rv), 0, 5) + +/* RXF_CTL fields */ +#define RXF_CTL_THR_RXIE BIT(6) +#define RXF_CTL_LAST BIT(5) +#define RXF_CTL_RX_THR(rv) extract8((rv), 0, 5) + +/* RXF_STS fields */ +#define RXF_STS_RX_THST BIT(6) +#define RXF_STS_RX_BYTES(rv) extract8((rv), 0, 5) + + +static void choose_bank(QTestState *qts, uint64_t base_addr, uint8_t bank) +{ + uint8_t ctl3 = qtest_readb(qts, base_addr + OFFSET_CTL3); + + if (bank) { + ctl3 |= CTL3_BNK_SEL; + } else { + ctl3 &= ~CTL3_BNK_SEL; + } + + qtest_writeb(qts, base_addr + OFFSET_CTL3, ctl3); +} static void check_running(QTestState *qts, uint64_t base_addr) { @@ -XXX,XX +XXX,XX @@ static void send_byte(QTestState *qts, uint64_t base_addr, uint8_t byte) qtest_writeb(qts, base_addr + OFFSET_SDA, byte); } +static bool check_recv(QTestState *qts, uint64_t base_addr) +{ + uint8_t st, fif_ctl, rxf_ctl, rxf_sts; + bool fifo; + + st = qtest_readb(qts, base_addr + OFFSET_ST); + choose_bank(qts, base_addr, 0); + fif_ctl = qtest_readb(qts, base_addr + OFFSET_FIF_CTL); + fifo = fif_ctl & FIF_CTL_FIFO_EN; + if (!fifo) { + return st == (ST_MODE | ST_SDAST); + } + + choose_bank(qts, base_addr, 1); + rxf_ctl = qtest_readb(qts, base_addr + OFFSET_RXF_CTL); + rxf_sts = qtest_readb(qts, base_addr + OFFSET_RXF_STS); + + if ((rxf_ctl & RXF_CTL_THR_RXIE) && RXF_STS_RX_BYTES(rxf_sts) < 16) { + return st == ST_MODE; + } else { + return st == (ST_MODE | ST_SDAST); + } +} + static uint8_t recv_byte(QTestState *qts, uint64_t base_addr) { - g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_ST), ==, - ST_MODE | ST_SDAST); + g_assert_true(check_recv(qts, base_addr)); return qtest_readb(qts, base_addr + OFFSET_SDA); } @@ -XXX,XX +XXX,XX @@ static void send_address(QTestState *qts, uint64_t base_addr, uint8_t addr, qtest_writeb(qts, base_addr + OFFSET_ST, ST_STASTR); st = qtest_readb(qts, base_addr + OFFSET_ST); if (recv) { - g_assert_cmphex(st, ==, ST_MODE | ST_SDAST); + g_assert_true(check_recv(qts, base_addr)); } else { g_assert_cmphex(st, ==, ST_MODE | ST_XMIT | ST_SDAST); } @@ -XXX,XX +XXX,XX @@ static void send_nack(QTestState *qts, uint64_t base_addr) qtest_writeb(qts, base_addr + OFFSET_CTL1, ctl1); } +static void start_fifo_mode(QTestState *qts, uint64_t base_addr) +{ + choose_bank(qts, base_addr, 0); + qtest_writeb(qts, base_addr + OFFSET_FIF_CTL, FIF_CTL_FIFO_EN); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_FIF_CTL) & + FIF_CTL_FIFO_EN); + choose_bank(qts, base_addr, 1); + qtest_writeb(qts, base_addr + OFFSET_FIF_CTS, + FIF_CTS_CLR_FIFO | FIF_CTS_RFTE_IE); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_FIF_CTS), ==, + FIF_CTS_RFTE_IE); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_TXF_STS), ==, 0); + g_assert_cmphex(qtest_readb(qts, base_addr + OFFSET_RXF_STS), ==, 0); +} + +static void start_recv_fifo(QTestState *qts, uint64_t base_addr, uint8_t bytes) +{ + choose_bank(qts, base_addr, 1); + qtest_writeb(qts, base_addr + OFFSET_TXF_CTL, 0); + qtest_writeb(qts, base_addr + OFFSET_RXF_CTL, + RXF_CTL_THR_RXIE | RXF_CTL_LAST | bytes); +} + /* Check the SMBus's status is set correctly when disabled. */ static void test_disable_bus(gconstpointer data) { @@ -XXX,XX +XXX,XX @@ static void test_single_mode(gconstpointer data) qtest_quit(qts); } +/* Check the SMBus can send and receive bytes in FIFO mode. */ +static void test_fifo_mode(gconstpointer data) +{ + intptr_t index = (intptr_t)data; + uint64_t base_addr = SMBUS_ADDR(index); + int irq = SMBUS_IRQ(index); + uint8_t value = 0x60; + QTestState *qts = qtest_init("-machine npcm750-evb"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + enable_bus(qts, base_addr); + start_fifo_mode(qts, base_addr); + g_assert_false(qtest_get_irq(qts, irq)); + + /* Sending */ + start_transfer(qts, base_addr); + send_address(qts, base_addr, EVB_DEVICE_ADDR, false, true); + choose_bank(qts, base_addr, 1); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_FIF_CTS) & + FIF_CTS_RXF_TXE); + qtest_writeb(qts, base_addr + OFFSET_TXF_CTL, TXF_CTL_THR_TXIE); + send_byte(qts, base_addr, TMP105_REG_CONFIG); + send_byte(qts, base_addr, value); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_FIF_CTS) & + FIF_CTS_RXF_TXE); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_TXF_STS) & + TXF_STS_TX_THST); + g_assert_cmpuint(TXF_STS_TX_BYTES( + qtest_readb(qts, base_addr + OFFSET_TXF_STS)), ==, 0); + g_assert_true(qtest_get_irq(qts, irq)); + stop_transfer(qts, base_addr); + check_stopped(qts, base_addr); + + /* Receiving */ + start_fifo_mode(qts, base_addr); + start_transfer(qts, base_addr); + send_address(qts, base_addr, EVB_DEVICE_ADDR, false, true); + send_byte(qts, base_addr, TMP105_REG_CONFIG); + start_transfer(qts, base_addr); + qtest_writeb(qts, base_addr + OFFSET_FIF_CTS, FIF_CTS_RXF_TXE); + start_recv_fifo(qts, base_addr, 1); + send_address(qts, base_addr, EVB_DEVICE_ADDR, true, true); + g_assert_false(qtest_readb(qts, base_addr + OFFSET_FIF_CTS) & + FIF_CTS_RXF_TXE); + g_assert_true(qtest_readb(qts, base_addr + OFFSET_RXF_STS) & + RXF_STS_RX_THST); + g_assert_cmpuint(RXF_STS_RX_BYTES( + qtest_readb(qts, base_addr + OFFSET_RXF_STS)), ==, 1); + send_nack(qts, base_addr); + stop_transfer(qts, base_addr); + check_running(qts, base_addr); + g_assert_cmphex(recv_byte(qts, base_addr), ==, value); + g_assert_cmpuint(RXF_STS_RX_BYTES( + qtest_readb(qts, base_addr + OFFSET_RXF_STS)), ==, 0); + check_stopped(qts, base_addr); + qtest_quit(qts); +} + static void smbus_add_test(const char *name, int index, GTestDataFunc fn) { g_autofree char *full_name = g_strdup_printf( @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) for (i = 0; i < ARRAY_SIZE(evb_bus_list); ++i) { add_test(single_mode, evb_bus_list[i]); + add_test(fifo_mode, evb_bus_list[i]); } return g_test_run(); diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_smbus_send_byte(const char *id, uint8_t value, int success) "%s send byt npcm7xx_smbus_recv_byte(const char *id, uint8_t value) "%s recv byte: 0x%02x" npcm7xx_smbus_stop(const char *id) "%s stopping" npcm7xx_smbus_nack(const char *id) "%s nacking" +npcm7xx_smbus_recv_fifo(const char *id, uint8_t received, uint8_t expected) "%s recv fifo: received %u, expected %u" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Also add Damien as a reviewer. Signed-off-by: Luc Michel <luc@lmichel.fr> Acked-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210211085318.2507-1-luc@lmichel.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: pc-bios/opensbi-* F: .gitlab-ci.d/opensbi.yml F: .gitlab-ci.d/opensbi/ +Clock framework +M: Luc Michel <luc@lmichel.fr> +R: Damien Hedde <damien.hedde@greensocs.com> +S: Maintained +F: include/hw/clock.h +F: include/hw/qdev-clock.h +F: hw/core/clock.c +F: hw/core/clock-vmstate.c +F: hw/core/qdev-clock.c +F: docs/devel/clocks.rst + Usermode Emulation ------------------ Overall usermode emulation -- 2.20.1 From: Doug Evans <dje@google.com> This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210213002520.1374134-2-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/npcm7xx_emc.h | 286 ++++++++++++ hw/net/npcm7xx_emc.c | 857 +++++++++++++++++++++++++++++++++++ hw/net/meson.build | 1 + hw/net/trace-events | 17 + 4 files changed, 1161 insertions(+) create mode 100644 include/hw/net/npcm7xx_emc.h create mode 100644 hw/net/npcm7xx_emc.c diff --git a/include/hw/net/npcm7xx_emc.h b/include/hw/net/npcm7xx_emc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/npcm7xx_emc.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx EMC Module + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef NPCM7XX_EMC_H +#define NPCM7XX_EMC_H + +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "net/net.h" + +/* 32-bit register indices. */ +enum NPCM7xxPWMRegister { + /* Control registers. */ + REG_CAMCMR, + REG_CAMEN, + + /* There are 16 CAMn[ML] registers. */ + REG_CAMM_BASE, + REG_CAML_BASE, + REG_CAMML_LAST = 0x21, + + REG_TXDLSA = 0x22, + REG_RXDLSA, + REG_MCMDR, + REG_MIID, + REG_MIIDA, + REG_FFTCR, + REG_TSDR, + REG_RSDR, + REG_DMARFC, + REG_MIEN, + + /* Status registers. */ + REG_MISTA, + REG_MGSTA, + REG_MPCNT, + REG_MRPC, + REG_MRPCC, + REG_MREPC, + REG_DMARFS, + REG_CTXDSA, + REG_CTXBSA, + REG_CRXDSA, + REG_CRXBSA, + + NPCM7XX_NUM_EMC_REGS, +}; + +/* REG_CAMCMR fields */ +/* Enable CAM Compare */ +#define REG_CAMCMR_ECMP (1 << 4) +/* Complement CAM Compare */ +#define REG_CAMCMR_CCAM (1 << 3) +/* Accept Broadcast Packet */ +#define REG_CAMCMR_ABP (1 << 2) +/* Accept Multicast Packet */ +#define REG_CAMCMR_AMP (1 << 1) +/* Accept Unicast Packet */ +#define REG_CAMCMR_AUP (1 << 0) + +/* REG_MCMDR fields */ +/* Software Reset */ +#define REG_MCMDR_SWR (1 << 24) +/* Internal Loopback Select */ +#define REG_MCMDR_LBK (1 << 21) +/* Operation Mode Select */ +#define REG_MCMDR_OPMOD (1 << 20) +/* Enable MDC Clock Generation */ +#define REG_MCMDR_ENMDC (1 << 19) +/* Full-Duplex Mode Select */ +#define REG_MCMDR_FDUP (1 << 18) +/* Enable SQE Checking */ +#define REG_MCMDR_ENSEQ (1 << 17) +/* Send PAUSE Frame */ +#define REG_MCMDR_SDPZ (1 << 16) +/* No Defer */ +#define REG_MCMDR_NDEF (1 << 9) +/* Frame Transmission On */ +#define REG_MCMDR_TXON (1 << 8) +/* Strip CRC Checksum */ +#define REG_MCMDR_SPCRC (1 << 5) +/* Accept CRC Error Packet */ +#define REG_MCMDR_AEP (1 << 4) +/* Accept Control Packet */ +#define REG_MCMDR_ACP (1 << 3) +/* Accept Runt Packet */ +#define REG_MCMDR_ARP (1 << 2) +/* Accept Long Packet */ +#define REG_MCMDR_ALP (1 << 1) +/* Frame Reception On */ +#define REG_MCMDR_RXON (1 << 0) + +/* REG_MIEN fields */ +/* Enable Transmit Descriptor Unavailable Interrupt */ +#define REG_MIEN_ENTDU (1 << 23) +/* Enable Transmit Completion Interrupt */ +#define REG_MIEN_ENTXCP (1 << 18) +/* Enable Transmit Interrupt */ +#define REG_MIEN_ENTXINTR (1 << 16) +/* Enable Receive Descriptor Unavailable Interrupt */ +#define REG_MIEN_ENRDU (1 << 10) +/* Enable Receive Good Interrupt */ +#define REG_MIEN_ENRXGD (1 << 4) +/* Enable Receive Interrupt */ +#define REG_MIEN_ENRXINTR (1 << 0) + +/* REG_MISTA fields */ +/* TODO: Add error fields and support simulated errors? */ +/* Transmit Bus Error Interrupt */ +#define REG_MISTA_TXBERR (1 << 24) +/* Transmit Descriptor Unavailable Interrupt */ +#define REG_MISTA_TDU (1 << 23) +/* Transmit Completion Interrupt */ +#define REG_MISTA_TXCP (1 << 18) +/* Transmit Interrupt */ +#define REG_MISTA_TXINTR (1 << 16) +/* Receive Bus Error Interrupt */ +#define REG_MISTA_RXBERR (1 << 11) +/* Receive Descriptor Unavailable Interrupt */ +#define REG_MISTA_RDU (1 << 10) +/* DMA Early Notification Interrupt */ +#define REG_MISTA_DENI (1 << 9) +/* Maximum Frame Length Interrupt */ +#define REG_MISTA_DFOI (1 << 8) +/* Receive Good Interrupt */ +#define REG_MISTA_RXGD (1 << 4) +/* Packet Too Long Interrupt */ +#define REG_MISTA_PTLE (1 << 3) +/* Receive Interrupt */ +#define REG_MISTA_RXINTR (1 << 0) + +/* REG_MGSTA fields */ +/* Transmission Halted */ +#define REG_MGSTA_TXHA (1 << 11) +/* Receive Halted */ +#define REG_MGSTA_RXHA (1 << 11) + +/* REG_DMARFC fields */ +/* Maximum Receive Frame Length */ +#define REG_DMARFC_RXMS(word) extract32((word), 0, 16) + +/* REG MIIDA fields */ +/* Busy Bit */ +#define REG_MIIDA_BUSY (1 << 17) + +/* Transmit and receive descriptors */ +typedef struct NPCM7xxEMCTxDesc NPCM7xxEMCTxDesc; +typedef struct NPCM7xxEMCRxDesc NPCM7xxEMCRxDesc; + +struct NPCM7xxEMCTxDesc { + uint32_t flags; + uint32_t txbsa; + uint32_t status_and_length; + uint32_t ntxdsa; +}; + +struct NPCM7xxEMCRxDesc { + uint32_t status_and_length; + uint32_t rxbsa; + uint32_t reserved; + uint32_t nrxdsa; +}; + +/* NPCM7xxEMCTxDesc.flags values */ +/* Owner: 0 = cpu, 1 = emc */ +#define TX_DESC_FLAG_OWNER_MASK (1 << 31) +/* Transmit interrupt enable */ +#define TX_DESC_FLAG_INTEN (1 << 2) +/* CRC append */ +#define TX_DESC_FLAG_CRCAPP (1 << 1) +/* Padding enable */ +#define TX_DESC_FLAG_PADEN (1 << 0) + +/* NPCM7xxEMCTxDesc.status_and_length values */ +/* Collision count */ +#define TX_DESC_STATUS_CCNT_SHIFT 28 +#define TX_DESC_STATUS_CCNT_BITSIZE 4 +/* SQE error */ +#define TX_DESC_STATUS_SQE (1 << 26) +/* Transmission paused */ +#define TX_DESC_STATUS_PAU (1 << 25) +/* P transmission halted */ +#define TX_DESC_STATUS_TXHA (1 << 24) +/* Late collision */ +#define TX_DESC_STATUS_LC (1 << 23) +/* Transmission abort */ +#define TX_DESC_STATUS_TXABT (1 << 22) +/* No carrier sense */ +#define TX_DESC_STATUS_NCS (1 << 21) +/* Defer exceed */ +#define TX_DESC_STATUS_EXDEF (1 << 20) +/* Transmission complete */ +#define TX_DESC_STATUS_TXCP (1 << 19) +/* Transmission deferred */ +#define TX_DESC_STATUS_DEF (1 << 17) +/* Transmit interrupt */ +#define TX_DESC_STATUS_TXINTR (1 << 16) + +#define TX_DESC_PKT_LEN(word) extract32((word), 0, 16) + +/* Transmit buffer start address */ +#define TX_DESC_TXBSA(word) ((uint32_t) (word) & ~3u) + +/* Next transmit descriptor start address */ +#define TX_DESC_NTXDSA(word) ((uint32_t) (word) & ~3u) + +/* NPCM7xxEMCRxDesc.status_and_length values */ +/* Owner: 0b00 = cpu, 0b01 = undefined, 0b10 = emc, 0b11 = undefined */ +#define RX_DESC_STATUS_OWNER_SHIFT 30 +#define RX_DESC_STATUS_OWNER_BITSIZE 2 +#define RX_DESC_STATUS_OWNER_MASK (3 << RX_DESC_STATUS_OWNER_SHIFT) +/* Runt packet */ +#define RX_DESC_STATUS_RP (1 << 22) +/* Alignment error */ +#define RX_DESC_STATUS_ALIE (1 << 21) +/* Frame reception complete */ +#define RX_DESC_STATUS_RXGD (1 << 20) +/* Packet too long */ +#define RX_DESC_STATUS_PTLE (1 << 19) +/* CRC error */ +#define RX_DESC_STATUS_CRCE (1 << 17) +/* Receive interrupt */ +#define RX_DESC_STATUS_RXINTR (1 << 16) + +#define RX_DESC_PKT_LEN(word) extract32((word), 0, 16) + +/* Receive buffer start address */ +#define RX_DESC_RXBSA(word) ((uint32_t) (word) & ~3u) + +/* Next receive descriptor start address */ +#define RX_DESC_NRXDSA(word) ((uint32_t) (word) & ~3u) + +/* Minimum packet length, when TX_DESC_FLAG_PADEN is set. */ +#define MIN_PACKET_LENGTH 64 + +struct NPCM7xxEMCState { + /*< private >*/ + SysBusDevice parent; + /*< public >*/ + + MemoryRegion iomem; + + qemu_irq tx_irq; + qemu_irq rx_irq; + + NICState *nic; + NICConf conf; + + /* 0 or 1, for log messages */ + uint8_t emc_num; + + uint32_t regs[NPCM7XX_NUM_EMC_REGS]; + + /* + * tx is active. Set to true by TSDR and then switches off when out of + * descriptors. If the TXON bit in REG_MCMDR is off then this is off. + */ + bool tx_active; + + /* + * rx is active. Set to true by RSDR and then switches off when out of + * descriptors. If the RXON bit in REG_MCMDR is off then this is off. + */ + bool rx_active; +}; + +typedef struct NPCM7xxEMCState NPCM7xxEMCState; + +#define TYPE_NPCM7XX_EMC "npcm7xx-emc" +#define NPCM7XX_EMC(obj) \ + OBJECT_CHECK(NPCM7xxEMCState, (obj), TYPE_NPCM7XX_EMC) + +#endif /* NPCM7XX_EMC_H */ diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/npcm7xx_emc.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx EMC Module + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * Unsupported/unimplemented features: + * - MCMDR.FDUP (full duplex) is ignored, half duplex is not supported + * - Only CAM0 is supported, CAM[1-15] are not + * - writes to CAMEN.[1-15] are ignored, these bits always read as zeroes + * - MII is not implemented, MIIDA.BUSY and MIID always return zero + * - MCMDR.LBK is not implemented + * - MCMDR.{OPMOD,ENSQE,AEP,ARP} are not supported + * - H/W FIFOs are not supported, MCMDR.FFTCR is ignored + * - MGSTA.SQE is not supported + * - pause and control frames are not implemented + * - MGSTA.CCNT is not supported + * - MPCNT, DMARFS are not implemented + */ + +#include "qemu/osdep.h" + +/* For crc32 */ +#include <zlib.h> + +#include "qemu-common.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/net/npcm7xx_emc.h" +#include "net/eth.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "sysemu/dma.h" +#include "trace.h" + +#define CRC_LENGTH 4 + +/* + * The maximum size of a (layer 2) ethernet frame as defined by 802.3. + * 1518 = 6(dest macaddr) + 6(src macaddr) + 2(proto) + 4(crc) + 1500(payload) + * This does not include an additional 4 for the vlan field (802.1q). + */ +#define MAX_ETH_FRAME_SIZE 1518 + +static const char *emc_reg_name(int regno) +{ +#define REG(name) case REG_ ## name: return #name; + switch (regno) { + REG(CAMCMR) + REG(CAMEN) + REG(TXDLSA) + REG(RXDLSA) + REG(MCMDR) + REG(MIID) + REG(MIIDA) + REG(FFTCR) + REG(TSDR) + REG(RSDR) + REG(DMARFC) + REG(MIEN) + REG(MISTA) + REG(MGSTA) + REG(MPCNT) + REG(MRPC) + REG(MRPCC) + REG(MREPC) + REG(DMARFS) + REG(CTXDSA) + REG(CTXBSA) + REG(CRXDSA) + REG(CRXBSA) + case REG_CAMM_BASE + 0: return "CAM0M"; + case REG_CAML_BASE + 0: return "CAM0L"; + case REG_CAMM_BASE + 2 ... REG_CAMML_LAST: + /* Only CAM0 is supported, fold the others into something simple. */ + if (regno & 1) { + return "CAM<n>L"; + } else { + return "CAM<n>M"; + } + default: return "UNKNOWN"; + } +#undef REG +} + +static void emc_reset(NPCM7xxEMCState *emc) +{ + trace_npcm7xx_emc_reset(emc->emc_num); + + memset(&emc->regs[0], 0, sizeof(emc->regs)); + + /* These regs have non-zero reset values. */ + emc->regs[REG_TXDLSA] = 0xfffffffc; + emc->regs[REG_RXDLSA] = 0xfffffffc; + emc->regs[REG_MIIDA] = 0x00900000; + emc->regs[REG_FFTCR] = 0x0101; + emc->regs[REG_DMARFC] = 0x0800; + emc->regs[REG_MPCNT] = 0x7fff; + + emc->tx_active = false; + emc->rx_active = false; +} + +static void npcm7xx_emc_reset(DeviceState *dev) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); + emc_reset(emc); +} + +static void emc_soft_reset(NPCM7xxEMCState *emc) +{ + /* + * The docs say at least MCMDR.{LBK,OPMOD} bits are not changed during a + * soft reset, but does not go into further detail. For now, KISS. + */ + uint32_t mcmdr = emc->regs[REG_MCMDR]; + emc_reset(emc); + emc->regs[REG_MCMDR] = mcmdr & (REG_MCMDR_LBK | REG_MCMDR_OPMOD); + + qemu_set_irq(emc->tx_irq, 0); + qemu_set_irq(emc->rx_irq, 0); +} + +static void emc_set_link(NetClientState *nc) +{ + /* Nothing to do yet. */ +} + +/* MISTA.TXINTR is the union of the individual bits with their enables. */ +static void emc_update_mista_txintr(NPCM7xxEMCState *emc) +{ + /* Only look at the bits we support. */ + uint32_t mask = (REG_MISTA_TXBERR | + REG_MISTA_TDU | + REG_MISTA_TXCP); + if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & mask) { + emc->regs[REG_MISTA] |= REG_MISTA_TXINTR; + } else { + emc->regs[REG_MISTA] &= ~REG_MISTA_TXINTR; + } +} + +/* MISTA.RXINTR is the union of the individual bits with their enables. */ +static void emc_update_mista_rxintr(NPCM7xxEMCState *emc) +{ + /* Only look at the bits we support. */ + uint32_t mask = (REG_MISTA_RXBERR | + REG_MISTA_RDU | + REG_MISTA_RXGD); + if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & mask) { + emc->regs[REG_MISTA] |= REG_MISTA_RXINTR; + } else { + emc->regs[REG_MISTA] &= ~REG_MISTA_RXINTR; + } +} + +/* N.B. emc_update_mista_txintr must have already been called. */ +static void emc_update_tx_irq(NPCM7xxEMCState *emc) +{ + int level = !!(emc->regs[REG_MISTA] & + emc->regs[REG_MIEN] & + REG_MISTA_TXINTR); + trace_npcm7xx_emc_update_tx_irq(level); + qemu_set_irq(emc->tx_irq, level); +} + +/* N.B. emc_update_mista_rxintr must have already been called. */ +static void emc_update_rx_irq(NPCM7xxEMCState *emc) +{ + int level = !!(emc->regs[REG_MISTA] & + emc->regs[REG_MIEN] & + REG_MISTA_RXINTR); + trace_npcm7xx_emc_update_rx_irq(level); + qemu_set_irq(emc->rx_irq, level); +} + +/* Update IRQ states due to changes in MIEN,MISTA. */ +static void emc_update_irq_from_reg_change(NPCM7xxEMCState *emc) +{ + emc_update_mista_txintr(emc); + emc_update_tx_irq(emc); + + emc_update_mista_rxintr(emc); + emc_update_rx_irq(emc); +} + +static int emc_read_tx_desc(dma_addr_t addr, NPCM7xxEMCTxDesc *desc) +{ + if (dma_memory_read(&address_space_memory, addr, desc, sizeof(*desc))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read descriptor @ 0x%" + HWADDR_PRIx "\n", __func__, addr); + return -1; + } + desc->flags = le32_to_cpu(desc->flags); + desc->txbsa = le32_to_cpu(desc->txbsa); + desc->status_and_length = le32_to_cpu(desc->status_and_length); + desc->ntxdsa = le32_to_cpu(desc->ntxdsa); + return 0; +} + +static int emc_write_tx_desc(const NPCM7xxEMCTxDesc *desc, dma_addr_t addr) +{ + NPCM7xxEMCTxDesc le_desc; + + le_desc.flags = cpu_to_le32(desc->flags); + le_desc.txbsa = cpu_to_le32(desc->txbsa); + le_desc.status_and_length = cpu_to_le32(desc->status_and_length); + le_desc.ntxdsa = cpu_to_le32(desc->ntxdsa); + if (dma_memory_write(&address_space_memory, addr, &le_desc, + sizeof(le_desc))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to write descriptor @ 0x%" + HWADDR_PRIx "\n", __func__, addr); + return -1; + } + return 0; +} + +static int emc_read_rx_desc(dma_addr_t addr, NPCM7xxEMCRxDesc *desc) +{ + if (dma_memory_read(&address_space_memory, addr, desc, sizeof(*desc))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read descriptor @ 0x%" + HWADDR_PRIx "\n", __func__, addr); + return -1; + } + desc->status_and_length = le32_to_cpu(desc->status_and_length); + desc->rxbsa = le32_to_cpu(desc->rxbsa); + desc->reserved = le32_to_cpu(desc->reserved); + desc->nrxdsa = le32_to_cpu(desc->nrxdsa); + return 0; +} + +static int emc_write_rx_desc(const NPCM7xxEMCRxDesc *desc, dma_addr_t addr) +{ + NPCM7xxEMCRxDesc le_desc; + + le_desc.status_and_length = cpu_to_le32(desc->status_and_length); + le_desc.rxbsa = cpu_to_le32(desc->rxbsa); + le_desc.reserved = cpu_to_le32(desc->reserved); + le_desc.nrxdsa = cpu_to_le32(desc->nrxdsa); + if (dma_memory_write(&address_space_memory, addr, &le_desc, + sizeof(le_desc))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to write descriptor @ 0x%" + HWADDR_PRIx "\n", __func__, addr); + return -1; + } + return 0; +} + +static void emc_set_mista(NPCM7xxEMCState *emc, uint32_t flags) +{ + trace_npcm7xx_emc_set_mista(flags); + emc->regs[REG_MISTA] |= flags; + if (extract32(flags, 16, 16)) { + emc_update_mista_txintr(emc); + } + if (extract32(flags, 0, 16)) { + emc_update_mista_rxintr(emc); + } +} + +static void emc_halt_tx(NPCM7xxEMCState *emc, uint32_t mista_flag) +{ + emc->tx_active = false; + emc_set_mista(emc, mista_flag); +} + +static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) +{ + emc->rx_active = false; + emc_set_mista(emc, mista_flag); +} + +static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, + const NPCM7xxEMCTxDesc *tx_desc, + uint32_t desc_addr) +{ + /* Update the current descriptor, if only to reset the owner flag. */ + if (emc_write_tx_desc(tx_desc, desc_addr)) { + /* + * We just read it so this shouldn't generally happen. + * Error already reported. + */ + emc_set_mista(emc, REG_MISTA_TXBERR); + } + emc->regs[REG_CTXDSA] = TX_DESC_NTXDSA(tx_desc->ntxdsa); +} + +static void emc_set_next_rx_descriptor(NPCM7xxEMCState *emc, + const NPCM7xxEMCRxDesc *rx_desc, + uint32_t desc_addr) +{ + /* Update the current descriptor, if only to reset the owner flag. */ + if (emc_write_rx_desc(rx_desc, desc_addr)) { + /* + * We just read it so this shouldn't generally happen. + * Error already reported. + */ + emc_set_mista(emc, REG_MISTA_RXBERR); + } + emc->regs[REG_CRXDSA] = RX_DESC_NRXDSA(rx_desc->nrxdsa); +} + +static void emc_try_send_next_packet(NPCM7xxEMCState *emc) +{ + /* Working buffer for sending out packets. Most packets fit in this. */ +#define TX_BUFFER_SIZE 2048 + uint8_t tx_send_buffer[TX_BUFFER_SIZE]; + uint32_t desc_addr = TX_DESC_NTXDSA(emc->regs[REG_CTXDSA]); + NPCM7xxEMCTxDesc tx_desc; + uint32_t next_buf_addr, length; + uint8_t *buf; + g_autofree uint8_t *malloced_buf = NULL; + + if (emc_read_tx_desc(desc_addr, &tx_desc)) { + /* Error reading descriptor, already reported. */ + emc_halt_tx(emc, REG_MISTA_TXBERR); + emc_update_tx_irq(emc); + return; + } + + /* Nothing we can do if we don't own the descriptor. */ + if (!(tx_desc.flags & TX_DESC_FLAG_OWNER_MASK)) { + trace_npcm7xx_emc_cpu_owned_desc(desc_addr); + emc_halt_tx(emc, REG_MISTA_TDU); + emc_update_tx_irq(emc); + return; + } + + /* Give the descriptor back regardless of what happens. */ + tx_desc.flags &= ~TX_DESC_FLAG_OWNER_MASK; + tx_desc.status_and_length &= 0xffff; + + /* + * Despite the h/w documentation saying the tx buffer is word aligned, + * the linux driver does not word align the buffer. There is value in not + * aligning the buffer: See the description of NET_IP_ALIGN in linux + * kernel sources. + */ + next_buf_addr = tx_desc.txbsa; + emc->regs[REG_CTXBSA] = next_buf_addr; + length = TX_DESC_PKT_LEN(tx_desc.status_and_length); + buf = &tx_send_buffer[0]; + + if (length > sizeof(tx_send_buffer)) { + malloced_buf = g_malloc(length); + buf = malloced_buf; + } + + if (dma_memory_read(&address_space_memory, next_buf_addr, buf, length)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read packet @ 0x%x\n", + __func__, next_buf_addr); + emc_set_mista(emc, REG_MISTA_TXBERR); + emc_set_next_tx_descriptor(emc, &tx_desc, desc_addr); + emc_update_tx_irq(emc); + trace_npcm7xx_emc_tx_done(emc->regs[REG_CTXDSA]); + return; + } + + if ((tx_desc.flags & TX_DESC_FLAG_PADEN) && (length < MIN_PACKET_LENGTH)) { + memset(buf + length, 0, MIN_PACKET_LENGTH - length); + length = MIN_PACKET_LENGTH; + } + + /* N.B. emc_receive can get called here. */ + qemu_send_packet(qemu_get_queue(emc->nic), buf, length); + trace_npcm7xx_emc_sent_packet(length); + + tx_desc.status_and_length |= TX_DESC_STATUS_TXCP; + if (tx_desc.flags & TX_DESC_FLAG_INTEN) { + emc_set_mista(emc, REG_MISTA_TXCP); + } + if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & REG_MISTA_TXINTR) { + tx_desc.status_and_length |= TX_DESC_STATUS_TXINTR; + } + + emc_set_next_tx_descriptor(emc, &tx_desc, desc_addr); + emc_update_tx_irq(emc); + trace_npcm7xx_emc_tx_done(emc->regs[REG_CTXDSA]); +} + +static bool emc_can_receive(NetClientState *nc) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(qemu_get_nic_opaque(nc)); + + bool can_receive = emc->rx_active; + trace_npcm7xx_emc_can_receive(can_receive); + return can_receive; +} + +/* If result is false then *fail_reason contains the reason. */ +static bool emc_receive_filter1(NPCM7xxEMCState *emc, const uint8_t *buf, + size_t len, const char **fail_reason) +{ + eth_pkt_types_e pkt_type = get_eth_packet_type(PKT_GET_ETH_HDR(buf)); + + switch (pkt_type) { + case ETH_PKT_BCAST: + if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { + return true; + } else { + *fail_reason = "Broadcast packet disabled"; + return !!(emc->regs[REG_CAMCMR] & REG_CAMCMR_ABP); + } + case ETH_PKT_MCAST: + if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { + return true; + } else { + *fail_reason = "Multicast packet disabled"; + return !!(emc->regs[REG_CAMCMR] & REG_CAMCMR_AMP); + } + case ETH_PKT_UCAST: { + bool matches; + if (emc->regs[REG_CAMCMR] & REG_CAMCMR_AUP) { + return true; + } + matches = ((emc->regs[REG_CAMCMR] & REG_CAMCMR_ECMP) && + /* We only support one CAM register, CAM0. */ + (emc->regs[REG_CAMEN] & (1 << 0)) && + memcmp(buf, emc->conf.macaddr.a, ETH_ALEN) == 0); + if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { + *fail_reason = "MACADDR matched, comparison complemented"; + return !matches; + } else { + *fail_reason = "MACADDR didn't match"; + return matches; + } + } + default: + g_assert_not_reached(); + } +} + +static bool emc_receive_filter(NPCM7xxEMCState *emc, const uint8_t *buf, + size_t len) +{ + const char *fail_reason = NULL; + bool ok = emc_receive_filter1(emc, buf, len, &fail_reason); + if (!ok) { + trace_npcm7xx_emc_packet_filtered_out(fail_reason); + } + return ok; +} + +static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(qemu_get_nic_opaque(nc)); + const uint32_t len = len1; + size_t max_frame_len; + bool long_frame; + uint32_t desc_addr; + NPCM7xxEMCRxDesc rx_desc; + uint32_t crc; + uint8_t *crc_ptr; + uint32_t buf_addr; + + trace_npcm7xx_emc_receiving_packet(len); + + if (!emc_can_receive(nc)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Unexpected packet\n", __func__); + return -1; + } + + if (len < ETH_HLEN || + /* Defensive programming: drop unsupportable large packets. */ + len > 0xffff - CRC_LENGTH) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Dropped frame of %u bytes\n", + __func__, len); + return len; + } + + /* + * DENI is set if EMC received the Length/Type field of the incoming + * packet, so it will be set regardless of what happens next. + */ + emc_set_mista(emc, REG_MISTA_DENI); + + if (!emc_receive_filter(emc, buf, len)) { + emc_update_rx_irq(emc); + return len; + } + + /* Huge frames (> DMARFC) are dropped. */ + max_frame_len = REG_DMARFC_RXMS(emc->regs[REG_DMARFC]); + if (len + CRC_LENGTH > max_frame_len) { + trace_npcm7xx_emc_packet_dropped(len); + emc_set_mista(emc, REG_MISTA_DFOI); + emc_update_rx_irq(emc); + return len; + } + + /* + * Long Frames (> MAX_ETH_FRAME_SIZE) are also dropped, unless MCMDR.ALP + * is set. + */ + long_frame = false; + if (len + CRC_LENGTH > MAX_ETH_FRAME_SIZE) { + if (emc->regs[REG_MCMDR] & REG_MCMDR_ALP) { + long_frame = true; + } else { + trace_npcm7xx_emc_packet_dropped(len); + emc_set_mista(emc, REG_MISTA_PTLE); + emc_update_rx_irq(emc); + return len; + } + } + + desc_addr = RX_DESC_NRXDSA(emc->regs[REG_CRXDSA]); + if (emc_read_rx_desc(desc_addr, &rx_desc)) { + /* Error reading descriptor, already reported. */ + emc_halt_rx(emc, REG_MISTA_RXBERR); + emc_update_rx_irq(emc); + return len; + } + + /* Nothing we can do if we don't own the descriptor. */ + if (!(rx_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK)) { + trace_npcm7xx_emc_cpu_owned_desc(desc_addr); + emc_halt_rx(emc, REG_MISTA_RDU); + emc_update_rx_irq(emc); + return len; + } + + crc = 0; + crc_ptr = (uint8_t *) &crc; + if (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC)) { + crc = cpu_to_be32(crc32(~0, buf, len)); + } + + /* Give the descriptor back regardless of what happens. */ + rx_desc.status_and_length &= ~RX_DESC_STATUS_OWNER_MASK; + + buf_addr = rx_desc.rxbsa; + emc->regs[REG_CRXBSA] = buf_addr; + if (dma_memory_write(&address_space_memory, buf_addr, buf, len) || + (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC) && + dma_memory_write(&address_space_memory, buf_addr + len, crc_ptr, + 4))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bus error writing packet\n", + __func__); + emc_set_mista(emc, REG_MISTA_RXBERR); + emc_set_next_rx_descriptor(emc, &rx_desc, desc_addr); + emc_update_rx_irq(emc); + trace_npcm7xx_emc_rx_done(emc->regs[REG_CRXDSA]); + return len; + } + + trace_npcm7xx_emc_received_packet(len); + + /* Note: We've already verified len+4 <= 0xffff. */ + rx_desc.status_and_length = len; + if (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC)) { + rx_desc.status_and_length += 4; + } + rx_desc.status_and_length |= RX_DESC_STATUS_RXGD; + emc_set_mista(emc, REG_MISTA_RXGD); + + if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & REG_MISTA_RXINTR) { + rx_desc.status_and_length |= RX_DESC_STATUS_RXINTR; + } + if (long_frame) { + rx_desc.status_and_length |= RX_DESC_STATUS_PTLE; + } + + emc_set_next_rx_descriptor(emc, &rx_desc, desc_addr); + emc_update_rx_irq(emc); + trace_npcm7xx_emc_rx_done(emc->regs[REG_CRXDSA]); + return len; +} + +static void emc_try_receive_next_packet(NPCM7xxEMCState *emc) +{ + if (emc_can_receive(qemu_get_queue(emc->nic))) { + qemu_flush_queued_packets(qemu_get_queue(emc->nic)); + } +} + +static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCM7xxEMCState *emc = opaque; + uint32_t reg = offset / sizeof(uint32_t); + uint32_t result; + + if (reg >= NPCM7XX_NUM_EMC_REGS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Invalid offset 0x%04" HWADDR_PRIx "\n", + __func__, offset); + return 0; + } + + switch (reg) { + case REG_MIID: + /* + * We don't implement MII. For determinism, always return zero as + * writes record the last value written for debugging purposes. + */ + qemu_log_mask(LOG_UNIMP, "%s: Read of MIID, returning 0\n", __func__); + result = 0; + break; + case REG_TSDR: + case REG_RSDR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Read of write-only reg, %s/%d\n", + __func__, emc_reg_name(reg), reg); + return 0; + default: + result = emc->regs[reg]; + break; + } + + trace_npcm7xx_emc_reg_read(emc->emc_num, result, emc_reg_name(reg), reg); + return result; +} + +static void npcm7xx_emc_write(void *opaque, hwaddr offset, + uint64_t v, unsigned size) +{ + NPCM7xxEMCState *emc = opaque; + uint32_t reg = offset / sizeof(uint32_t); + uint32_t value = v; + + g_assert(size == sizeof(uint32_t)); + + if (reg >= NPCM7XX_NUM_EMC_REGS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Invalid offset 0x%04" HWADDR_PRIx "\n", + __func__, offset); + return; + } + + trace_npcm7xx_emc_reg_write(emc->emc_num, emc_reg_name(reg), reg, value); + + switch (reg) { + case REG_CAMCMR: + emc->regs[reg] = value; + break; + case REG_CAMEN: + /* Only CAM0 is supported, don't pretend otherwise. */ + if (value & ~1) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Only CAM0 is supported, cannot enable others" + ": 0x%x\n", + __func__, value); + } + emc->regs[reg] = value & 1; + break; + case REG_CAMM_BASE + 0: + emc->regs[reg] = value; + emc->conf.macaddr.a[0] = value >> 24; + emc->conf.macaddr.a[1] = value >> 16; + emc->conf.macaddr.a[2] = value >> 8; + emc->conf.macaddr.a[3] = value >> 0; + break; + case REG_CAML_BASE + 0: + emc->regs[reg] = value; + emc->conf.macaddr.a[4] = value >> 24; + emc->conf.macaddr.a[5] = value >> 16; + break; + case REG_MCMDR: { + uint32_t prev; + if (value & REG_MCMDR_SWR) { + emc_soft_reset(emc); + /* On h/w the reset happens over multiple cycles. For now KISS. */ + break; + } + prev = emc->regs[reg]; + emc->regs[reg] = value; + /* Update tx state. */ + if (!(prev & REG_MCMDR_TXON) && + (value & REG_MCMDR_TXON)) { + emc->regs[REG_CTXDSA] = emc->regs[REG_TXDLSA]; + /* + * Linux kernel turns TX on with CPU still holding descriptor, + * which suggests we should wait for a write to TSDR before trying + * to send a packet: so we don't send one here. + */ + } else if ((prev & REG_MCMDR_TXON) && + !(value & REG_MCMDR_TXON)) { + emc->regs[REG_MGSTA] |= REG_MGSTA_TXHA; + } + if (!(value & REG_MCMDR_TXON)) { + emc_halt_tx(emc, 0); + } + /* Update rx state. */ + if (!(prev & REG_MCMDR_RXON) && + (value & REG_MCMDR_RXON)) { + emc->regs[REG_CRXDSA] = emc->regs[REG_RXDLSA]; + } else if ((prev & REG_MCMDR_RXON) && + !(value & REG_MCMDR_RXON)) { + emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; + } + if (!(value & REG_MCMDR_RXON)) { + emc_halt_rx(emc, 0); + } + break; + } + case REG_TXDLSA: + case REG_RXDLSA: + case REG_DMARFC: + case REG_MIID: + emc->regs[reg] = value; + break; + case REG_MIEN: + emc->regs[reg] = value; + emc_update_irq_from_reg_change(emc); + break; + case REG_MISTA: + /* Clear the bits that have 1 in "value". */ + emc->regs[reg] &= ~value; + emc_update_irq_from_reg_change(emc); + break; + case REG_MGSTA: + /* Clear the bits that have 1 in "value". */ + emc->regs[reg] &= ~value; + break; + case REG_TSDR: + if (emc->regs[REG_MCMDR] & REG_MCMDR_TXON) { + emc->tx_active = true; + /* Keep trying to send packets until we run out. */ + while (emc->tx_active) { + emc_try_send_next_packet(emc); + } + } + break; + case REG_RSDR: + if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { + emc->rx_active = true; + emc_try_receive_next_packet(emc); + } + break; + case REG_MIIDA: + emc->regs[reg] = value & ~REG_MIIDA_BUSY; + break; + case REG_MRPC: + case REG_MRPCC: + case REG_MREPC: + case REG_CTXDSA: + case REG_CTXBSA: + case REG_CRXDSA: + case REG_CRXBSA: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write to read-only reg %s/%d\n", + __func__, emc_reg_name(reg), reg); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: Write to unimplemented reg %s/%d\n", + __func__, emc_reg_name(reg), reg); + break; + } +} + +static const struct MemoryRegionOps npcm7xx_emc_ops = { + .read = npcm7xx_emc_read, + .write = npcm7xx_emc_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void emc_cleanup(NetClientState *nc) +{ + /* Nothing to do yet. */ +} + +static NetClientInfo net_npcm7xx_emc_info = { + .type = NET_CLIENT_DRIVER_NIC, + .size = sizeof(NICState), + .can_receive = emc_can_receive, + .receive = emc_receive, + .cleanup = emc_cleanup, + .link_status_changed = emc_set_link, +}; + +static void npcm7xx_emc_realize(DeviceState *dev, Error **errp) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(emc); + + memory_region_init_io(&emc->iomem, OBJECT(emc), &npcm7xx_emc_ops, emc, + TYPE_NPCM7XX_EMC, 4 * KiB); + sysbus_init_mmio(sbd, &emc->iomem); + sysbus_init_irq(sbd, &emc->tx_irq); + sysbus_init_irq(sbd, &emc->rx_irq); + + qemu_macaddr_default_if_unset(&emc->conf.macaddr); + emc->nic = qemu_new_nic(&net_npcm7xx_emc_info, &emc->conf, + object_get_typename(OBJECT(dev)), dev->id, emc); + qemu_format_nic_info_str(qemu_get_queue(emc->nic), emc->conf.macaddr.a); +} + +static void npcm7xx_emc_unrealize(DeviceState *dev) +{ + NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); + + qemu_del_nic(emc->nic); +} + +static const VMStateDescription vmstate_npcm7xx_emc = { + .name = TYPE_NPCM7XX_EMC, + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(emc_num, NPCM7xxEMCState), + VMSTATE_UINT32_ARRAY(regs, NPCM7xxEMCState, NPCM7XX_NUM_EMC_REGS), + VMSTATE_BOOL(tx_active, NPCM7xxEMCState), + VMSTATE_BOOL(rx_active, NPCM7xxEMCState), + VMSTATE_END_OF_LIST(), + }, +}; + +static Property npcm7xx_emc_properties[] = { + DEFINE_NIC_PROPERTIES(NPCM7xxEMCState, conf), + DEFINE_PROP_END_OF_LIST(), +}; + +static void npcm7xx_emc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); + dc->desc = "NPCM7xx EMC Controller"; + dc->realize = npcm7xx_emc_realize; + dc->unrealize = npcm7xx_emc_unrealize; + dc->reset = npcm7xx_emc_reset; + dc->vmsd = &vmstate_npcm7xx_emc; + device_class_set_props(dc, npcm7xx_emc_properties); +} + +static const TypeInfo npcm7xx_emc_info = { + .name = TYPE_NPCM7XX_EMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxEMCState), + .class_init = npcm7xx_emc_class_init, +}; + +static void npcm7xx_emc_register_type(void) +{ + type_register_static(&npcm7xx_emc_info); +} + +type_init(npcm7xx_emc_register_type) diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_I82596_COMMON', if_true: files('i82596.c')) softmmu_ss.add(when: 'CONFIG_SUNHME', if_true: files('sunhme.c')) softmmu_ss.add(when: 'CONFIG_FTGMAC100', if_true: files('ftgmac100.c')) softmmu_ss.add(when: 'CONFIG_SUNGEM', if_true: files('sungem.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_emc.c')) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_eth.c')) softmmu_ss.add(when: 'CONFIG_COLDFIRE', if_true: files('mcf_fec.c')) diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ imx_fec_receive_last(int last) "rx frame flags 0x%04x" imx_enet_receive(size_t size) "len %zu" imx_enet_receive_len(uint64_t addr, int len) "rx_bd 0x%"PRIx64" length %d" imx_enet_receive_last(int last) "rx frame flags 0x%04x" + +# npcm7xx_emc.c +npcm7xx_emc_reset(int emc_num) "Resetting emc%d" +npcm7xx_emc_update_tx_irq(int level) "Setting tx irq to %d" +npcm7xx_emc_update_rx_irq(int level) "Setting rx irq to %d" +npcm7xx_emc_set_mista(uint32_t flags) "ORing 0x%x into MISTA" +npcm7xx_emc_cpu_owned_desc(uint32_t addr) "Can't process cpu-owned descriptor @0x%x" +npcm7xx_emc_sent_packet(uint32_t len) "Sent %u byte packet" +npcm7xx_emc_tx_done(uint32_t ctxdsa) "TX done, CTXDSA=0x%x" +npcm7xx_emc_can_receive(int can_receive) "Can receive: %d" +npcm7xx_emc_packet_filtered_out(const char* fail_reason) "Packet filtered out: %s" +npcm7xx_emc_packet_dropped(uint32_t len) "%u byte packet dropped" +npcm7xx_emc_receiving_packet(uint32_t len) "Receiving %u byte packet" +npcm7xx_emc_received_packet(uint32_t len) "Received %u byte packet" +npcm7xx_emc_rx_done(uint32_t crxdsa) "RX done, CRXDSA=0x%x" +npcm7xx_emc_reg_read(int emc_num, uint32_t result, const char *name, int regno) "emc%d: 0x%x = reg[%s/%d]" +npcm7xx_emc_reg_write(int emc_num, const char *name, int regno, uint32_t value) "emc%d: reg[%s/%d] = 0x%x" -- 2.20.1 From: Doug Evans <dje@google.com> This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210213002520.1374134-3-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 3 ++- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 50 +++++++++++++++++++++++++++++++++++-- 3 files changed, 52 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Analog to Digital Converter (ADC) * Pulse Width Modulation (PWM) * SMBus controller (SMBF) + * Ethernet controller (EMC) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Shared memory (SHM) * eSPI slave interface - * Ethernet controllers (GMAC and EMC) + * Ethernet controller (GMAC) * USB device (USBD) * Peripheral SPI controller (PSPI) * SD/MMC host diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/npcm7xx_gcr.h" #include "hw/misc/npcm7xx_pwm.h" #include "hw/misc/npcm7xx_rng.h" +#include "hw/net/npcm7xx_emc.h" #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { EHCISysBusState ehci; OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; + NPCM7xxEMCState emc[2]; } NPCM7xxState; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_UART1_IRQ, NPCM7XX_UART2_IRQ, NPCM7XX_UART3_IRQ, + NPCM7XX_EMC1RX_IRQ = 15, + NPCM7XX_EMC1TX_IRQ, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_SMBUS15_IRQ, NPCM7XX_PWM0_IRQ = 93, /* PWM module 0 */ NPCM7XX_PWM1_IRQ, /* PWM module 1 */ + NPCM7XX_EMC2RX_IRQ = 114, + NPCM7XX_EMC2TX_IRQ, NPCM7XX_GPIO0_IRQ = 116, NPCM7XX_GPIO1_IRQ, NPCM7XX_GPIO2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_smbus_addr[] = { 0xf008f000, }; +/* Register base address for each EMC Module */ +static const hwaddr npcm7xx_emc_addr[] = { + 0xf0825000, + 0xf0826000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->pwm); i++) { object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM); } + + for (i = 0; i < ARRAY_SIZE(s->emc); i++) { + object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); + } } static void npcm7xx_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i)); } + /* + * EMC Modules. Cannot fail. + * The mapping of the device to its netdev backend works as follows: + * emc[i] = nd_table[i] + * This works around the inability to specify the netdev property for the + * emc device: it's not pluggable and thus the -device option can't be + * used. + */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_emc_addr) != ARRAY_SIZE(s->emc)); + QEMU_BUILD_BUG_ON(ARRAY_SIZE(s->emc) != 2); + for (i = 0; i < ARRAY_SIZE(s->emc); i++) { + s->emc[i].emc_num = i; + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->emc[i]); + if (nd_table[i].used) { + qemu_check_nic_model(&nd_table[i], TYPE_NPCM7XX_EMC); + qdev_set_nic_properties(DEVICE(sbd), &nd_table[i]); + } + /* + * The device exists regardless of whether it's connected to a QEMU + * netdev backend. So always instantiate it even if there is no + * backend. + */ + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_emc_addr[i]); + int tx_irq = i == 0 ? NPCM7XX_EMC1TX_IRQ : NPCM7XX_EMC2TX_IRQ; + int rx_irq = i == 0 ? NPCM7XX_EMC1RX_IRQ : NPCM7XX_EMC2RX_IRQ; + /* + * N.B. The values for the second argument sysbus_connect_irq are + * chosen to match the registration order in npcm7xx_emc_realize. + */ + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, tx_irq)); + sysbus_connect_irq(sbd, 1, npcm7xx_irq(s, rx_irq)); + } + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.vcd", 0xf0810000, 64 * KiB); create_unimplemented_device("npcm7xx.ece", 0xf0820000, 8 * KiB); create_unimplemented_device("npcm7xx.vdma", 0xf0822000, 8 * KiB); - create_unimplemented_device("npcm7xx.emc1", 0xf0825000, 4 * KiB); - create_unimplemented_device("npcm7xx.emc2", 0xf0826000, 4 * KiB); create_unimplemented_device("npcm7xx.usbd[0]", 0xf0830000, 4 * KiB); create_unimplemented_device("npcm7xx.usbd[1]", 0xf0831000, 4 * KiB); create_unimplemented_device("npcm7xx.usbd[2]", 0xf0832000, 4 * KiB); -- 2.20.1 From: Doug Evans <dje@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210213002520.1374134-4-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_emc-test.c | 862 +++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 863 insertions(+) create mode 100644 tests/qtest/npcm7xx_emc-test.c diff --git a/tests/qtest/npcm7xx_emc-test.c b/tests/qtest/npcm7xx_emc-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_emc-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx EMC Modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "libqos/libqos.h" +#include "qapi/qmp/qdict.h" +#include "qapi/qmp/qnum.h" +#include "qemu/bitops.h" +#include "qemu/iov.h" + +/* Name of the emc device. */ +#define TYPE_NPCM7XX_EMC "npcm7xx-emc" + +/* Timeout for various operations, in seconds. */ +#define TIMEOUT_SECONDS 10 + +/* Address in memory of the descriptor. */ +#define DESC_ADDR (1 << 20) /* 1 MiB */ + +/* Address in memory of the data packet. */ +#define DATA_ADDR (DESC_ADDR + 4096) + +#define CRC_LENGTH 4 + +#define NUM_TX_DESCRIPTORS 3 +#define NUM_RX_DESCRIPTORS 2 + +/* Size of tx,rx test buffers. */ +#define TX_DATA_LEN 64 +#define RX_DATA_LEN 64 + +#define TX_STEP_COUNT 10000 +#define RX_STEP_COUNT 10000 + +/* 32-bit register indices. */ +typedef enum NPCM7xxPWMRegister { + /* Control registers. */ + REG_CAMCMR, + REG_CAMEN, + + /* There are 16 CAMn[ML] registers. */ + REG_CAMM_BASE, + REG_CAML_BASE, + + REG_TXDLSA = 0x22, + REG_RXDLSA, + REG_MCMDR, + REG_MIID, + REG_MIIDA, + REG_FFTCR, + REG_TSDR, + REG_RSDR, + REG_DMARFC, + REG_MIEN, + + /* Status registers. */ + REG_MISTA, + REG_MGSTA, + REG_MPCNT, + REG_MRPC, + REG_MRPCC, + REG_MREPC, + REG_DMARFS, + REG_CTXDSA, + REG_CTXBSA, + REG_CRXDSA, + REG_CRXBSA, + + NPCM7XX_NUM_EMC_REGS, +} NPCM7xxPWMRegister; + +enum { NUM_CAMML_REGS = 16 }; + +/* REG_CAMCMR fields */ +/* Enable CAM Compare */ +#define REG_CAMCMR_ECMP (1 << 4) +/* Accept Unicast Packet */ +#define REG_CAMCMR_AUP (1 << 0) + +/* REG_MCMDR fields */ +/* Software Reset */ +#define REG_MCMDR_SWR (1 << 24) +/* Frame Transmission On */ +#define REG_MCMDR_TXON (1 << 8) +/* Accept Long Packet */ +#define REG_MCMDR_ALP (1 << 1) +/* Frame Reception On */ +#define REG_MCMDR_RXON (1 << 0) + +/* REG_MIEN fields */ +/* Enable Transmit Completion Interrupt */ +#define REG_MIEN_ENTXCP (1 << 18) +/* Enable Transmit Interrupt */ +#define REG_MIEN_ENTXINTR (1 << 16) +/* Enable Receive Good Interrupt */ +#define REG_MIEN_ENRXGD (1 << 4) +/* ENable Receive Interrupt */ +#define REG_MIEN_ENRXINTR (1 << 0) + +/* REG_MISTA fields */ +/* Transmit Bus Error Interrupt */ +#define REG_MISTA_TXBERR (1 << 24) +/* Transmit Descriptor Unavailable Interrupt */ +#define REG_MISTA_TDU (1 << 23) +/* Transmit Completion Interrupt */ +#define REG_MISTA_TXCP (1 << 18) +/* Transmit Interrupt */ +#define REG_MISTA_TXINTR (1 << 16) +/* Receive Bus Error Interrupt */ +#define REG_MISTA_RXBERR (1 << 11) +/* Receive Descriptor Unavailable Interrupt */ +#define REG_MISTA_RDU (1 << 10) +/* DMA Early Notification Interrupt */ +#define REG_MISTA_DENI (1 << 9) +/* Maximum Frame Length Interrupt */ +#define REG_MISTA_DFOI (1 << 8) +/* Receive Good Interrupt */ +#define REG_MISTA_RXGD (1 << 4) +/* Packet Too Long Interrupt */ +#define REG_MISTA_PTLE (1 << 3) +/* Receive Interrupt */ +#define REG_MISTA_RXINTR (1 << 0) + +typedef struct NPCM7xxEMCTxDesc NPCM7xxEMCTxDesc; +typedef struct NPCM7xxEMCRxDesc NPCM7xxEMCRxDesc; + +struct NPCM7xxEMCTxDesc { + uint32_t flags; + uint32_t txbsa; + uint32_t status_and_length; + uint32_t ntxdsa; +}; + +struct NPCM7xxEMCRxDesc { + uint32_t status_and_length; + uint32_t rxbsa; + uint32_t reserved; + uint32_t nrxdsa; +}; + +/* NPCM7xxEMCTxDesc.flags values */ +/* Owner: 0 = cpu, 1 = emc */ +#define TX_DESC_FLAG_OWNER_MASK (1 << 31) +/* Transmit interrupt enable */ +#define TX_DESC_FLAG_INTEN (1 << 2) + +/* NPCM7xxEMCTxDesc.status_and_length values */ +/* Transmission complete */ +#define TX_DESC_STATUS_TXCP (1 << 19) +/* Transmit interrupt */ +#define TX_DESC_STATUS_TXINTR (1 << 16) + +/* NPCM7xxEMCRxDesc.status_and_length values */ +/* Owner: 0b00 = cpu, 0b10 = emc */ +#define RX_DESC_STATUS_OWNER_SHIFT 30 +#define RX_DESC_STATUS_OWNER_MASK 0xc0000000 +/* Frame Reception Complete */ +#define RX_DESC_STATUS_RXGD (1 << 20) +/* Packet too long */ +#define RX_DESC_STATUS_PTLE (1 << 19) +/* Receive Interrupt */ +#define RX_DESC_STATUS_RXINTR (1 << 16) + +#define RX_DESC_PKT_LEN(word) ((uint32_t) (word) & 0xffff) + +typedef struct EMCModule { + int rx_irq; + int tx_irq; + uint64_t base_addr; +} EMCModule; + +typedef struct TestData { + const EMCModule *module; +} TestData; + +static const EMCModule emc_module_list[] = { + { + .rx_irq = 15, + .tx_irq = 16, + .base_addr = 0xf0825000 + }, + { + .rx_irq = 114, + .tx_irq = 115, + .base_addr = 0xf0826000 + } +}; + +/* Returns the index of the EMC module. */ +static int emc_module_index(const EMCModule *mod) +{ + ptrdiff_t diff = mod - emc_module_list; + + g_assert_true(diff >= 0 && diff < ARRAY_SIZE(emc_module_list)); + + return diff; +} + +static void packet_test_clear(void *sockets) +{ + int *test_sockets = sockets; + + close(test_sockets[0]); + g_free(test_sockets); +} + +static int *packet_test_init(int module_num, GString *cmd_line) +{ + int *test_sockets = g_new(int, 2); + int ret = socketpair(PF_UNIX, SOCK_STREAM, 0, test_sockets); + g_assert_cmpint(ret, != , -1); + + /* + * KISS and use -nic. We specify two nics (both emc{0,1}) because there's + * currently no way to specify only emc1: The driver implicitly relies on + * emc[i] == nd_table[i]. + */ + if (module_num == 0) { + g_string_append_printf(cmd_line, + " -nic socket,fd=%d,model=" TYPE_NPCM7XX_EMC " " + " -nic user,model=" TYPE_NPCM7XX_EMC " ", + test_sockets[1]); + } else { + g_string_append_printf(cmd_line, + " -nic user,model=" TYPE_NPCM7XX_EMC " " + " -nic socket,fd=%d,model=" TYPE_NPCM7XX_EMC " ", + test_sockets[1]); + } + + g_test_queue_destroy(packet_test_clear, test_sockets); + return test_sockets; +} + +static uint32_t emc_read(QTestState *qts, const EMCModule *mod, + NPCM7xxPWMRegister regno) +{ + return qtest_readl(qts, mod->base_addr + regno * sizeof(uint32_t)); +} + +static void emc_write(QTestState *qts, const EMCModule *mod, + NPCM7xxPWMRegister regno, uint32_t value) +{ + qtest_writel(qts, mod->base_addr + regno * sizeof(uint32_t), value); +} + +static void emc_read_tx_desc(QTestState *qts, uint32_t addr, + NPCM7xxEMCTxDesc *desc) +{ + qtest_memread(qts, addr, desc, sizeof(*desc)); + desc->flags = le32_to_cpu(desc->flags); + desc->txbsa = le32_to_cpu(desc->txbsa); + desc->status_and_length = le32_to_cpu(desc->status_and_length); + desc->ntxdsa = le32_to_cpu(desc->ntxdsa); +} + +static void emc_write_tx_desc(QTestState *qts, const NPCM7xxEMCTxDesc *desc, + uint32_t addr) +{ + NPCM7xxEMCTxDesc le_desc; + + le_desc.flags = cpu_to_le32(desc->flags); + le_desc.txbsa = cpu_to_le32(desc->txbsa); + le_desc.status_and_length = cpu_to_le32(desc->status_and_length); + le_desc.ntxdsa = cpu_to_le32(desc->ntxdsa); + qtest_memwrite(qts, addr, &le_desc, sizeof(le_desc)); +} + +static void emc_read_rx_desc(QTestState *qts, uint32_t addr, + NPCM7xxEMCRxDesc *desc) +{ + qtest_memread(qts, addr, desc, sizeof(*desc)); + desc->status_and_length = le32_to_cpu(desc->status_and_length); + desc->rxbsa = le32_to_cpu(desc->rxbsa); + desc->reserved = le32_to_cpu(desc->reserved); + desc->nrxdsa = le32_to_cpu(desc->nrxdsa); +} + +static void emc_write_rx_desc(QTestState *qts, const NPCM7xxEMCRxDesc *desc, + uint32_t addr) +{ + NPCM7xxEMCRxDesc le_desc; + + le_desc.status_and_length = cpu_to_le32(desc->status_and_length); + le_desc.rxbsa = cpu_to_le32(desc->rxbsa); + le_desc.reserved = cpu_to_le32(desc->reserved); + le_desc.nrxdsa = cpu_to_le32(desc->nrxdsa); + qtest_memwrite(qts, addr, &le_desc, sizeof(le_desc)); +} + +/* + * Reset the EMC module. + * The module must be reset before, e.g., TXDLSA,RXDLSA are changed. + */ +static bool emc_soft_reset(QTestState *qts, const EMCModule *mod) +{ + uint32_t val; + uint64_t end_time; + + emc_write(qts, mod, REG_MCMDR, REG_MCMDR_SWR); + + /* + * Wait for device to reset as the linux driver does. + * During reset the AHB reads 0 for all registers. So first wait for + * something that resets to non-zero, and then wait for SWR becoming 0. + */ + end_time = g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; + + do { + qtest_clock_step(qts, 100); + val = emc_read(qts, mod, REG_FFTCR); + } while (val == 0 && g_get_monotonic_time() < end_time); + if (val != 0) { + do { + qtest_clock_step(qts, 100); + val = emc_read(qts, mod, REG_MCMDR); + if ((val & REG_MCMDR_SWR) == 0) { + /* + * N.B. The CAMs have been reset here, so macaddr matching of + * incoming packets will not work. + */ + return true; + } + } while (g_get_monotonic_time() < end_time); + } + + g_message("%s: Timeout expired", __func__); + return false; +} + +/* Check emc registers are reset to default value. */ +static void test_init(gconstpointer test_data) +{ + const TestData *td = test_data; + const EMCModule *mod = td->module; + QTestState *qts = qtest_init("-machine quanta-gsj"); + int i; + +#define CHECK_REG(regno, value) \ + do { \ + g_assert_cmphex(emc_read(qts, mod, (regno)), ==, (value)); \ + } while (0) + + CHECK_REG(REG_CAMCMR, 0); + CHECK_REG(REG_CAMEN, 0); + CHECK_REG(REG_TXDLSA, 0xfffffffc); + CHECK_REG(REG_RXDLSA, 0xfffffffc); + CHECK_REG(REG_MCMDR, 0); + CHECK_REG(REG_MIID, 0); + CHECK_REG(REG_MIIDA, 0x00900000); + CHECK_REG(REG_FFTCR, 0x0101); + CHECK_REG(REG_DMARFC, 0x0800); + CHECK_REG(REG_MIEN, 0); + CHECK_REG(REG_MISTA, 0); + CHECK_REG(REG_MGSTA, 0); + CHECK_REG(REG_MPCNT, 0x7fff); + CHECK_REG(REG_MRPC, 0); + CHECK_REG(REG_MRPCC, 0); + CHECK_REG(REG_MREPC, 0); + CHECK_REG(REG_DMARFS, 0); + CHECK_REG(REG_CTXDSA, 0); + CHECK_REG(REG_CTXBSA, 0); + CHECK_REG(REG_CRXDSA, 0); + CHECK_REG(REG_CRXBSA, 0); + +#undef CHECK_REG + + for (i = 0; i < NUM_CAMML_REGS; ++i) { + g_assert_cmpuint(emc_read(qts, mod, REG_CAMM_BASE + i * 2), ==, + 0); + g_assert_cmpuint(emc_read(qts, mod, REG_CAML_BASE + i * 2), ==, + 0); + } + + qtest_quit(qts); +} + +static bool emc_wait_irq(QTestState *qts, const EMCModule *mod, int step, + bool is_tx) +{ + uint64_t end_time = + g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; + + do { + if (qtest_get_irq(qts, is_tx ? mod->tx_irq : mod->rx_irq)) { + return true; + } + qtest_clock_step(qts, step); + } while (g_get_monotonic_time() < end_time); + + g_message("%s: Timeout expired", __func__); + return false; +} + +static bool emc_wait_mista(QTestState *qts, const EMCModule *mod, int step, + uint32_t flag) +{ + uint64_t end_time = + g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; + + do { + uint32_t mista = emc_read(qts, mod, REG_MISTA); + if (mista & flag) { + return true; + } + qtest_clock_step(qts, step); + } while (g_get_monotonic_time() < end_time); + + g_message("%s: Timeout expired", __func__); + return false; +} + +static bool wait_socket_readable(int fd) +{ + fd_set read_fds; + struct timeval tv; + int rv; + + FD_ZERO(&read_fds); + FD_SET(fd, &read_fds); + tv.tv_sec = TIMEOUT_SECONDS; + tv.tv_usec = 0; + rv = select(fd + 1, &read_fds, NULL, NULL, &tv); + if (rv == -1) { + perror("select"); + } else if (rv == 0) { + g_message("%s: Timeout expired", __func__); + } + return rv == 1; +} + +/* Initialize *desc (in host endian format). */ +static void init_tx_desc(NPCM7xxEMCTxDesc *desc, size_t count, + uint32_t desc_addr) +{ + g_assert(count >= 2); + memset(&desc[0], 0, sizeof(*desc) * count); + /* Leave the last one alone, owned by the cpu -> stops transmission. */ + for (size_t i = 0; i < count - 1; ++i) { + desc[i].flags = + (TX_DESC_FLAG_OWNER_MASK | /* owner = 1: emc */ + TX_DESC_FLAG_INTEN | + 0 | /* crc append = 0 */ + 0 /* padding enable = 0 */); + desc[i].status_and_length = + (0 | /* collision count = 0 */ + 0 | /* SQE = 0 */ + 0 | /* PAU = 0 */ + 0 | /* TXHA = 0 */ + 0 | /* LC = 0 */ + 0 | /* TXABT = 0 */ + 0 | /* NCS = 0 */ + 0 | /* EXDEF = 0 */ + 0 | /* TXCP = 0 */ + 0 | /* DEF = 0 */ + 0 | /* TXINTR = 0 */ + 0 /* length filled in later */); + desc[i].ntxdsa = desc_addr + (i + 1) * sizeof(*desc); + } +} + +static void enable_tx(QTestState *qts, const EMCModule *mod, + const NPCM7xxEMCTxDesc *desc, size_t count, + uint32_t desc_addr, uint32_t mien_flags) +{ + /* Write the descriptors to guest memory. */ + for (size_t i = 0; i < count; ++i) { + emc_write_tx_desc(qts, desc + i, desc_addr + i * sizeof(*desc)); + } + + /* Trigger sending the packet. */ + /* The module must be reset before changing TXDLSA. */ + g_assert(emc_soft_reset(qts, mod)); + emc_write(qts, mod, REG_TXDLSA, desc_addr); + emc_write(qts, mod, REG_CTXDSA, ~0); + emc_write(qts, mod, REG_MIEN, REG_MIEN_ENTXCP | mien_flags); + { + uint32_t mcmdr = emc_read(qts, mod, REG_MCMDR); + mcmdr |= REG_MCMDR_TXON; + emc_write(qts, mod, REG_MCMDR, mcmdr); + } + + /* Prod the device to send the packet. */ + emc_write(qts, mod, REG_TSDR, 1); +} + +static void emc_send_verify1(QTestState *qts, const EMCModule *mod, int fd, + bool with_irq, uint32_t desc_addr, + uint32_t next_desc_addr, + const char *test_data, int test_size) +{ + NPCM7xxEMCTxDesc result_desc; + uint32_t expected_mask, expected_value, recv_len; + int ret; + char buffer[TX_DATA_LEN]; + + g_assert(wait_socket_readable(fd)); + + /* Read the descriptor back. */ + emc_read_tx_desc(qts, desc_addr, &result_desc); + /* Descriptor should be owned by cpu now. */ + g_assert((result_desc.flags & TX_DESC_FLAG_OWNER_MASK) == 0); + /* Test the status bits, ignoring the length field. */ + expected_mask = 0xffff << 16; + expected_value = TX_DESC_STATUS_TXCP; + if (with_irq) { + expected_value |= TX_DESC_STATUS_TXINTR; + } + g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, + expected_value); + + /* Check data sent to the backend. */ + recv_len = ~0; + ret = qemu_recv(fd, &recv_len, sizeof(recv_len), MSG_DONTWAIT); + g_assert_cmpint(ret, == , sizeof(recv_len)); + + g_assert(wait_socket_readable(fd)); + memset(buffer, 0xff, sizeof(buffer)); + ret = qemu_recv(fd, buffer, test_size, MSG_DONTWAIT); + g_assert_cmpmem(buffer, ret, test_data, test_size); +} + +static void emc_send_verify(QTestState *qts, const EMCModule *mod, int fd, + bool with_irq) +{ + NPCM7xxEMCTxDesc desc[NUM_TX_DESCRIPTORS]; + uint32_t desc_addr = DESC_ADDR; + static const char test1_data[] = "TEST1"; + static const char test2_data[] = "Testing 1 2 3 ..."; + uint32_t data1_addr = DATA_ADDR; + uint32_t data2_addr = data1_addr + sizeof(test1_data); + bool got_tdu; + uint32_t end_desc_addr; + + /* Prepare test data buffer. */ + qtest_memwrite(qts, data1_addr, test1_data, sizeof(test1_data)); + qtest_memwrite(qts, data2_addr, test2_data, sizeof(test2_data)); + + init_tx_desc(&desc[0], NUM_TX_DESCRIPTORS, desc_addr); + desc[0].txbsa = data1_addr; + desc[0].status_and_length |= sizeof(test1_data); + desc[1].txbsa = data2_addr; + desc[1].status_and_length |= sizeof(test2_data); + + enable_tx(qts, mod, &desc[0], NUM_TX_DESCRIPTORS, desc_addr, + with_irq ? REG_MIEN_ENTXINTR : 0); + + /* + * It's problematic to observe the interrupt for each packet. + * Instead just wait until all the packets go out. + */ + got_tdu = false; + while (!got_tdu) { + if (with_irq) { + g_assert_true(emc_wait_irq(qts, mod, TX_STEP_COUNT, + /*is_tx=*/true)); + } else { + g_assert_true(emc_wait_mista(qts, mod, TX_STEP_COUNT, + REG_MISTA_TXINTR)); + } + got_tdu = !!(emc_read(qts, mod, REG_MISTA) & REG_MISTA_TDU); + /* If we don't have TDU yet, reset the interrupt. */ + if (!got_tdu) { + emc_write(qts, mod, REG_MISTA, + emc_read(qts, mod, REG_MISTA) & 0xffff0000); + } + } + + end_desc_addr = desc_addr + 2 * sizeof(desc[0]); + g_assert_cmphex(emc_read(qts, mod, REG_CTXDSA), ==, end_desc_addr); + g_assert_cmphex(emc_read(qts, mod, REG_MISTA), ==, + REG_MISTA_TXCP | REG_MISTA_TXINTR | REG_MISTA_TDU); + + emc_send_verify1(qts, mod, fd, with_irq, + desc_addr, end_desc_addr, + test1_data, sizeof(test1_data)); + emc_send_verify1(qts, mod, fd, with_irq, + desc_addr + sizeof(desc[0]), end_desc_addr, + test2_data, sizeof(test2_data)); +} + +/* Initialize *desc (in host endian format). */ +static void init_rx_desc(NPCM7xxEMCRxDesc *desc, size_t count, + uint32_t desc_addr, uint32_t data_addr) +{ + g_assert_true(count >= 2); + memset(desc, 0, sizeof(*desc) * count); + desc[0].rxbsa = data_addr; + desc[0].status_and_length = + (0b10 << RX_DESC_STATUS_OWNER_SHIFT | /* owner = 10: emc */ + 0 | /* RP = 0 */ + 0 | /* ALIE = 0 */ + 0 | /* RXGD = 0 */ + 0 | /* PTLE = 0 */ + 0 | /* CRCE = 0 */ + 0 | /* RXINTR = 0 */ + 0 /* length (filled in later) */); + /* Leave the last one alone, owned by the cpu -> stops transmission. */ + desc[0].nrxdsa = desc_addr + sizeof(*desc); +} + +static void enable_rx(QTestState *qts, const EMCModule *mod, + const NPCM7xxEMCRxDesc *desc, size_t count, + uint32_t desc_addr, uint32_t mien_flags, + uint32_t mcmdr_flags) +{ + /* + * Write the descriptor to guest memory. + * FWIW, IWBN if the docs said the buffer needs to be at least DMARFC + * bytes. + */ + for (size_t i = 0; i < count; ++i) { + emc_write_rx_desc(qts, desc + i, desc_addr + i * sizeof(*desc)); + } + + /* Trigger receiving the packet. */ + /* The module must be reset before changing RXDLSA. */ + g_assert(emc_soft_reset(qts, mod)); + emc_write(qts, mod, REG_RXDLSA, desc_addr); + emc_write(qts, mod, REG_MIEN, REG_MIEN_ENRXGD | mien_flags); + + /* + * We don't know what the device's macaddr is, so just accept all + * unicast packets (AUP). + */ + emc_write(qts, mod, REG_CAMCMR, REG_CAMCMR_AUP); + emc_write(qts, mod, REG_CAMEN, 1 << 0); + { + uint32_t mcmdr = emc_read(qts, mod, REG_MCMDR); + mcmdr |= REG_MCMDR_RXON | mcmdr_flags; + emc_write(qts, mod, REG_MCMDR, mcmdr); + } + + /* Prod the device to accept a packet. */ + emc_write(qts, mod, REG_RSDR, 1); +} + +static void emc_recv_verify(QTestState *qts, const EMCModule *mod, int fd, + bool with_irq) +{ + NPCM7xxEMCRxDesc desc[NUM_RX_DESCRIPTORS]; + uint32_t desc_addr = DESC_ADDR; + uint32_t data_addr = DATA_ADDR; + int ret; + uint32_t expected_mask, expected_value; + NPCM7xxEMCRxDesc result_desc; + + /* Prepare test data buffer. */ + const char test[RX_DATA_LEN] = "TEST"; + int len = htonl(sizeof(test)); + const struct iovec iov[] = { + { + .iov_base = &len, + .iov_len = sizeof(len), + },{ + .iov_base = (char *) test, + .iov_len = sizeof(test), + }, + }; + + /* + * Reset the device BEFORE sending a test packet, otherwise the packet + * may get swallowed by an active device of an earlier test. + */ + init_rx_desc(&desc[0], NUM_RX_DESCRIPTORS, desc_addr, data_addr); + enable_rx(qts, mod, &desc[0], NUM_RX_DESCRIPTORS, desc_addr, + with_irq ? REG_MIEN_ENRXINTR : 0, 0); + + /* Send test packet to device's socket. */ + ret = iov_send(fd, iov, 2, 0, sizeof(len) + sizeof(test)); + g_assert_cmpint(ret, == , sizeof(test) + sizeof(len)); + + /* Wait for RX interrupt. */ + if (with_irq) { + g_assert_true(emc_wait_irq(qts, mod, RX_STEP_COUNT, /*is_tx=*/false)); + } else { + g_assert_true(emc_wait_mista(qts, mod, RX_STEP_COUNT, REG_MISTA_RXGD)); + } + + g_assert_cmphex(emc_read(qts, mod, REG_CRXDSA), ==, + desc_addr + sizeof(desc[0])); + + expected_mask = 0xffff; + expected_value = (REG_MISTA_DENI | + REG_MISTA_RXGD | + REG_MISTA_RXINTR); + g_assert_cmphex((emc_read(qts, mod, REG_MISTA) & expected_mask), + ==, expected_value); + + /* Read the descriptor back. */ + emc_read_rx_desc(qts, desc_addr, &result_desc); + /* Descriptor should be owned by cpu now. */ + g_assert((result_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK) == 0); + /* Test the status bits, ignoring the length field. */ + expected_mask = 0xffff << 16; + expected_value = RX_DESC_STATUS_RXGD; + if (with_irq) { + expected_value |= RX_DESC_STATUS_RXINTR; + } + g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, + expected_value); + g_assert_cmpint(RX_DESC_PKT_LEN(result_desc.status_and_length), ==, + RX_DATA_LEN + CRC_LENGTH); + + { + char buffer[RX_DATA_LEN]; + qtest_memread(qts, data_addr, buffer, sizeof(buffer)); + g_assert_cmpstr(buffer, == , "TEST"); + } +} + +static void emc_test_ptle(QTestState *qts, const EMCModule *mod, int fd) +{ + NPCM7xxEMCRxDesc desc[NUM_RX_DESCRIPTORS]; + uint32_t desc_addr = DESC_ADDR; + uint32_t data_addr = DATA_ADDR; + int ret; + NPCM7xxEMCRxDesc result_desc; + uint32_t expected_mask, expected_value; + + /* Prepare test data buffer. */ +#define PTLE_DATA_LEN 1600 + char test_data[PTLE_DATA_LEN]; + int len = htonl(sizeof(test_data)); + const struct iovec iov[] = { + { + .iov_base = &len, + .iov_len = sizeof(len), + },{ + .iov_base = (char *) test_data, + .iov_len = sizeof(test_data), + }, + }; + memset(test_data, 42, sizeof(test_data)); + + /* + * Reset the device BEFORE sending a test packet, otherwise the packet + * may get swallowed by an active device of an earlier test. + */ + init_rx_desc(&desc[0], NUM_RX_DESCRIPTORS, desc_addr, data_addr); + enable_rx(qts, mod, &desc[0], NUM_RX_DESCRIPTORS, desc_addr, + REG_MIEN_ENRXINTR, REG_MCMDR_ALP); + + /* Send test packet to device's socket. */ + ret = iov_send(fd, iov, 2, 0, sizeof(len) + sizeof(test_data)); + g_assert_cmpint(ret, == , sizeof(test_data) + sizeof(len)); + + /* Wait for RX interrupt. */ + g_assert_true(emc_wait_irq(qts, mod, RX_STEP_COUNT, /*is_tx=*/false)); + + /* Read the descriptor back. */ + emc_read_rx_desc(qts, desc_addr, &result_desc); + /* Descriptor should be owned by cpu now. */ + g_assert((result_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK) == 0); + /* Test the status bits, ignoring the length field. */ + expected_mask = 0xffff << 16; + expected_value = (RX_DESC_STATUS_RXGD | + RX_DESC_STATUS_PTLE | + RX_DESC_STATUS_RXINTR); + g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, + expected_value); + g_assert_cmpint(RX_DESC_PKT_LEN(result_desc.status_and_length), ==, + PTLE_DATA_LEN + CRC_LENGTH); + + { + char buffer[PTLE_DATA_LEN]; + qtest_memread(qts, data_addr, buffer, sizeof(buffer)); + g_assert(memcmp(buffer, test_data, PTLE_DATA_LEN) == 0); + } +} + +static void test_tx(gconstpointer test_data) +{ + const TestData *td = test_data; + GString *cmd_line = g_string_new("-machine quanta-gsj"); + int *test_sockets = packet_test_init(emc_module_index(td->module), + cmd_line); + QTestState *qts = qtest_init(cmd_line->str); + + /* + * TODO: For pedantic correctness test_sockets[0] should be closed after + * the fork and before the exec, but that will require some harness + * improvements. + */ + close(test_sockets[1]); + /* Defensive programming */ + test_sockets[1] = -1; + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + emc_send_verify(qts, td->module, test_sockets[0], /*with_irq=*/false); + emc_send_verify(qts, td->module, test_sockets[0], /*with_irq=*/true); + + qtest_quit(qts); +} + +static void test_rx(gconstpointer test_data) +{ + const TestData *td = test_data; + GString *cmd_line = g_string_new("-machine quanta-gsj"); + int *test_sockets = packet_test_init(emc_module_index(td->module), + cmd_line); + QTestState *qts = qtest_init(cmd_line->str); + + /* + * TODO: For pedantic correctness test_sockets[0] should be closed after + * the fork and before the exec, but that will require some harness + * improvements. + */ + close(test_sockets[1]); + /* Defensive programming */ + test_sockets[1] = -1; + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/false); + emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/true); + emc_test_ptle(qts, td->module, test_sockets[0]); + + qtest_quit(qts); +} + +static void emc_add_test(const char *name, const TestData* td, + GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf( + "npcm7xx_emc/emc[%d]/%s", emc_module_index(td->module), name); + qtest_add_data_func(full_name, td, fn); +} +#define add_test(name, td) emc_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + TestData test_data_list[ARRAY_SIZE(emc_module_list)]; + + g_test_init(&argc, &argv, NULL); + + for (int i = 0; i < ARRAY_SIZE(emc_module_list); ++i) { + TestData *td = &test_data_list[i]; + + td->module = &emc_module_list[i]; + + add_test(init, td); + add_test(tx, td); + add_test(rx, td); + } + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ qtests_npcm7xx = \ ['npcm7xx_adc-test', + 'npcm7xx_emc-test', 'npcm7xx_gpio-test', 'npcm7xx_pwm-test', 'npcm7xx_rng-test', -- 2.20.1