According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing.
Backslash-escapes may be necessary to prevent unintended parsing".
The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
lines on my system. A stand-alone backslash at EOL serves as line
continuation in a "parsed-literal" block. Therefore, escape the
backslashes that we want to appear as such in the formatted documentation.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
Resending with Peter's email address in the Cc: tag fixed. Sorry!
docs/system/device-url-syntax.rst.inc | 8 +-
qemu-options.hx | 108 ++++++++++----------
2 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/docs/system/device-url-syntax.rst.inc b/docs/system/device-url-syntax.rst.inc
index 88d7a372a748..6f6ec8366b7a 100644
--- a/docs/system/device-url-syntax.rst.inc
+++ b/docs/system/device-url-syntax.rst.inc
@@ -25,8 +25,8 @@ These are specified using a special URL syntax.
.. parsed-literal::
- |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
- -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \
+ |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\
+ -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\
-drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
Example (CHAP username/password via URL):
@@ -39,8 +39,8 @@ These are specified using a special URL syntax.
.. parsed-literal::
- LIBISCSI_CHAP_USERNAME="user" \
- LIBISCSI_CHAP_PASSWORD="password" \
+ LIBISCSI_CHAP_USERNAME="user" \\
+ LIBISCSI_CHAP_PASSWORD="password" \\
|qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
``NBD``
diff --git a/qemu-options.hx b/qemu-options.hx
index b0f020594eab..47f64be0c041 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -373,9 +373,9 @@ SRST
.. parsed-literal::
- |qemu_system| \
- -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
- -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
+ |qemu_system| \\
+ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
+ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
-drive file=/dev/fdset/2,index=0,media=disk
ERST
@@ -1338,9 +1338,9 @@ SRST
.. parsed-literal::
- |qemu_system| \
- -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
- -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
+ |qemu_system| \\
+ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
+ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
-drive file=/dev/fdset/2,index=0,media=disk
You can connect a CDROM to the slave of ide0:
@@ -2593,7 +2593,7 @@ SRST
.. parsed-literal::
- |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \
+ |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\
-netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
``smb=dir[,smbserver=addr]``
@@ -2703,15 +2703,15 @@ SRST
#launch a QEMU instance with two NICs, each one connected
#to a TAP device
- |qemu_system| linux.img \
- -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \
+ |qemu_system| linux.img \\
+ -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\
-netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
.. parsed-literal::
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
- |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \
+ |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
-netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
``-netdev bridge,id=id[,br=bridge][,helper=helper]``
@@ -2749,12 +2749,12 @@ SRST
.. parsed-literal::
# launch a first QEMU instance
- |qemu_system| linux.img \
- -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,listen=:1234
# connect the network of this instance to the network of the first instance
- |qemu_system| linux.img \
- -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
-netdev socket,id=n2,connect=127.0.0.1:1234
``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]``
@@ -2776,16 +2776,16 @@ SRST
.. parsed-literal::
# launch one QEMU instance
- |qemu_system| linux.img \
- -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=230.0.0.1:1234
# launch another QEMU instance on same "bus"
- |qemu_system| linux.img \
- -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
-netdev socket,id=n2,mcast=230.0.0.1:1234
# launch yet another QEMU instance on same "bus"
- |qemu_system| linux.img \
- -device e1000,netdev=n3,mac=52:54:00:12:34:58 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\
-netdev socket,id=n3,mcast=230.0.0.1:1234
Example (User Mode Linux compat.):
@@ -2793,8 +2793,8 @@ SRST
.. parsed-literal::
# launch QEMU instance (note mcast address selected is UML's default)
- |qemu_system| linux.img \
- -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=239.192.168.1:1102
# launch UML
/path/to/linux ubd0=/path/to/root_fs eth0=mcast
@@ -2803,8 +2803,8 @@ SRST
.. parsed-literal::
- |qemu_system| linux.img \
- -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]``
@@ -2860,9 +2860,9 @@ SRST
# Setup tunnel on linux host using raw ip as encapsulation
# on 1.2.3.4
- ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \
+ ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\
encap udp udp_sport 16384 udp_dport 16384
- ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \
+ ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\
0xFFFFFFFF peer_session_id 0xFFFFFFFF
ifconfig vmtunnel0 mtu 1500
ifconfig vmtunnel0 up
@@ -2872,7 +2872,7 @@ SRST
# on 4.3.2.1
# launch QEMU instance - if your network has reorder or is very lossy add ,pincounter
- |qemu_system| linux.img -device e1000,netdev=n1 \
+ |qemu_system| linux.img -device e1000,netdev=n1 \\
-netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]``
@@ -4627,8 +4627,8 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \
+ # |qemu_system| \\
+ -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\
-fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0
``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]``
@@ -4791,10 +4791,10 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- [...] \
- -object cryptodev-backend-builtin,id=cryptodev0 \
- -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
+ # |qemu_system| \\
+ [...] \\
+ -object cryptodev-backend-builtin,id=cryptodev0 \\
+ -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
[...]
``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]``
@@ -4810,11 +4810,11 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- [...] \
- -chardev socket,id=chardev0,path=/path/to/socket \
- -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \
- -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
+ # |qemu_system| \\
+ [...] \\
+ -chardev socket,id=chardev0,path=/path/to/socket \\
+ -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\
+ -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
[...]
``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]``
@@ -4892,9 +4892,9 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- -object secret,id=secmaster0,format=base64,file=key.b64 \
- -object secret,id=sec0,keyid=secmaster0,format=base64,\
+ # |qemu_system| \\
+ -object secret,id=secmaster0,format=base64,file=key.b64 \\
+ -object secret,id=sec0,keyid=secmaster0,format=base64,\\
data=$SECRET,iv=$(<iv.b64)
``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]``
@@ -4941,10 +4941,10 @@ SRST
.. parsed-literal::
- # |qemu_system_x86| \
- ......
- -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \
- -machine ...,memory-encryption=sev0
+ # |qemu_system_x86| \\
+ ...... \\
+ -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\
+ -machine ...,memory-encryption=sev0 \\
.....
``-object authz-simple,id=id,identity=string``
@@ -4962,9 +4962,9 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- ...
- -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \
+ # |qemu_system| \\
+ ... \\
+ -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\
...
Note the use of quotes due to the x509 distinguished name
@@ -5013,9 +5013,9 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- ...
- -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes
+ # |qemu_system| \\
+ ... \\
+ -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\
...
``-object authz-pam,id=id,service=string``
@@ -5032,9 +5032,9 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- ...
- -object authz-pam,id=auth0,service=qemu-vnc
+ # |qemu_system| \\
+ ... \\
+ -object authz-pam,id=auth0,service=qemu-vnc \\
...
There would then be a corresponding config file for PAM at
--
2.19.1.3.g30247aa5d201
On 9/8/20 7:21 PM, Laszlo Ersek wrote: > According to > <https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>, > "inline markup is recognized and there is no protection from parsing. > Backslash-escapes may be necessary to prevent unintended parsing". > > The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong > lines on my system. A stand-alone backslash at EOL serves as line > continuation in a "parsed-literal" block. Therefore, escape the > backslashes that we want to appear as such in the formatted documentation. > > Cc: Peter Maydell <peter.maydell@linaro.org> > Signed-off-by: Laszlo Ersek <lersek@redhat.com> > --- > > Notes: > Resending with Peter's email address in the Cc: tag fixed. Sorry! > > docs/system/device-url-syntax.rst.inc | 8 +- > qemu-options.hx | 108 ++++++++++---------- > 2 files changed, 58 insertions(+), 58 deletions(-) Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On 09/08/20 20:14, Philippe Mathieu-Daudé wrote: > On 9/8/20 7:21 PM, Laszlo Ersek wrote: >> According to >> <https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>, >> "inline markup is recognized and there is no protection from parsing. >> Backslash-escapes may be necessary to prevent unintended parsing". >> >> The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong >> lines on my system. A stand-alone backslash at EOL serves as line >> continuation in a "parsed-literal" block. Therefore, escape the >> backslashes that we want to appear as such in the formatted documentation. >> >> Cc: Peter Maydell <peter.maydell@linaro.org> >> Signed-off-by: Laszlo Ersek <lersek@redhat.com> >> --- >> >> Notes: >> Resending with Peter's email address in the Cc: tag fixed. Sorry! >> >> docs/system/device-url-syntax.rst.inc | 8 +- >> qemu-options.hx | 108 ++++++++++---------- >> 2 files changed, 58 insertions(+), 58 deletions(-) > > Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> > Thanks for the quick check! Laszlo
Cc'ing qemu-trivial@ On 9/8/20 7:21 PM, Laszlo Ersek wrote: > According to > <https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>, > "inline markup is recognized and there is no protection from parsing. > Backslash-escapes may be necessary to prevent unintended parsing". > > The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong > lines on my system. A stand-alone backslash at EOL serves as line > continuation in a "parsed-literal" block. Therefore, escape the > backslashes that we want to appear as such in the formatted documentation. > > Cc: Peter Maydell <peter.maydell@linaro.org> > Signed-off-by: Laszlo Ersek <lersek@redhat.com> > --- > > Notes: > Resending with Peter's email address in the Cc: tag fixed. Sorry! > > docs/system/device-url-syntax.rst.inc | 8 +- > qemu-options.hx | 108 ++++++++++---------- > 2 files changed, 58 insertions(+), 58 deletions(-) > > diff --git a/docs/system/device-url-syntax.rst.inc b/docs/system/device-url-syntax.rst.inc > index 88d7a372a748..6f6ec8366b7a 100644 > --- a/docs/system/device-url-syntax.rst.inc > +++ b/docs/system/device-url-syntax.rst.inc > @@ -25,8 +25,8 @@ These are specified using a special URL syntax. > > .. parsed-literal:: > > - |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ > - -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ > + |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\ > + -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\ > -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 > > Example (CHAP username/password via URL): > @@ -39,8 +39,8 @@ These are specified using a special URL syntax. > > .. parsed-literal:: > > - LIBISCSI_CHAP_USERNAME="user" \ > - LIBISCSI_CHAP_PASSWORD="password" \ > + LIBISCSI_CHAP_USERNAME="user" \\ > + LIBISCSI_CHAP_PASSWORD="password" \\ > |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 > > ``NBD`` > diff --git a/qemu-options.hx b/qemu-options.hx > index b0f020594eab..47f64be0c041 100644 > --- a/qemu-options.hx > +++ b/qemu-options.hx > @@ -373,9 +373,9 @@ SRST > > .. parsed-literal:: > > - |qemu_system| \ > - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ > - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ > + |qemu_system| \\ > + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\ > + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\ > -drive file=/dev/fdset/2,index=0,media=disk > ERST > > @@ -1338,9 +1338,9 @@ SRST > > .. parsed-literal:: > > - |qemu_system| \ > - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ > - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ > + |qemu_system| \\ > + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\ > + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\ > -drive file=/dev/fdset/2,index=0,media=disk > > You can connect a CDROM to the slave of ide0: > @@ -2593,7 +2593,7 @@ SRST > > .. parsed-literal:: > > - |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \ > + |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\ > -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 > > ``smb=dir[,smbserver=addr]`` > @@ -2703,15 +2703,15 @@ SRST > > #launch a QEMU instance with two NICs, each one connected > #to a TAP device > - |qemu_system| linux.img \ > - -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \ > + |qemu_system| linux.img \\ > + -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\ > -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1 > > .. parsed-literal:: > > #launch a QEMU instance with the default network helper to > #connect a TAP device to bridge br0 > - |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \ > + |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\ > -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper" > > ``-netdev bridge,id=id[,br=bridge][,helper=helper]`` > @@ -2749,12 +2749,12 @@ SRST > .. parsed-literal:: > > # launch a first QEMU instance > - |qemu_system| linux.img \ > - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ > + |qemu_system| linux.img \\ > + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ > -netdev socket,id=n1,listen=:1234 > # connect the network of this instance to the network of the first instance > - |qemu_system| linux.img \ > - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \ > + |qemu_system| linux.img \\ > + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\ > -netdev socket,id=n2,connect=127.0.0.1:1234 > > ``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]`` > @@ -2776,16 +2776,16 @@ SRST > .. parsed-literal:: > > # launch one QEMU instance > - |qemu_system| linux.img \ > - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ > + |qemu_system| linux.img \\ > + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ > -netdev socket,id=n1,mcast=230.0.0.1:1234 > # launch another QEMU instance on same "bus" > - |qemu_system| linux.img \ > - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \ > + |qemu_system| linux.img \\ > + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\ > -netdev socket,id=n2,mcast=230.0.0.1:1234 > # launch yet another QEMU instance on same "bus" > - |qemu_system| linux.img \ > - -device e1000,netdev=n3,mac=52:54:00:12:34:58 \ > + |qemu_system| linux.img \\ > + -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\ > -netdev socket,id=n3,mcast=230.0.0.1:1234 > > Example (User Mode Linux compat.): > @@ -2793,8 +2793,8 @@ SRST > .. parsed-literal:: > > # launch QEMU instance (note mcast address selected is UML's default) > - |qemu_system| linux.img \ > - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ > + |qemu_system| linux.img \\ > + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ > -netdev socket,id=n1,mcast=239.192.168.1:1102 > # launch UML > /path/to/linux ubd0=/path/to/root_fs eth0=mcast > @@ -2803,8 +2803,8 @@ SRST > > .. parsed-literal:: > > - |qemu_system| linux.img \ > - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ > + |qemu_system| linux.img \\ > + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ > -netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4 > > ``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]`` > @@ -2860,9 +2860,9 @@ SRST > > # Setup tunnel on linux host using raw ip as encapsulation > # on 1.2.3.4 > - ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \ > + ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\ > encap udp udp_sport 16384 udp_dport 16384 > - ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \ > + ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\ > 0xFFFFFFFF peer_session_id 0xFFFFFFFF > ifconfig vmtunnel0 mtu 1500 > ifconfig vmtunnel0 up > @@ -2872,7 +2872,7 @@ SRST > # on 4.3.2.1 > # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter > > - |qemu_system| linux.img -device e1000,netdev=n1 \ > + |qemu_system| linux.img -device e1000,netdev=n1 \\ > -netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter > > ``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]`` > @@ -4627,8 +4627,8 @@ SRST > > .. parsed-literal:: > > - # |qemu_system| \ > - -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \ > + # |qemu_system| \\ > + -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\ > -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0 > > ``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]`` > @@ -4791,10 +4791,10 @@ SRST > > .. parsed-literal:: > > - # |qemu_system| \ > - [...] \ > - -object cryptodev-backend-builtin,id=cryptodev0 \ > - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ > + # |qemu_system| \\ > + [...] \\ > + -object cryptodev-backend-builtin,id=cryptodev0 \\ > + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\ > [...] > > ``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]`` > @@ -4810,11 +4810,11 @@ SRST > > .. parsed-literal:: > > - # |qemu_system| \ > - [...] \ > - -chardev socket,id=chardev0,path=/path/to/socket \ > - -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \ > - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ > + # |qemu_system| \\ > + [...] \\ > + -chardev socket,id=chardev0,path=/path/to/socket \\ > + -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\ > + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\ > [...] > > ``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]`` > @@ -4892,9 +4892,9 @@ SRST > > .. parsed-literal:: > > - # |qemu_system| \ > - -object secret,id=secmaster0,format=base64,file=key.b64 \ > - -object secret,id=sec0,keyid=secmaster0,format=base64,\ > + # |qemu_system| \\ > + -object secret,id=secmaster0,format=base64,file=key.b64 \\ > + -object secret,id=sec0,keyid=secmaster0,format=base64,\\ > data=$SECRET,iv=$(<iv.b64) > > ``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]`` > @@ -4941,10 +4941,10 @@ SRST > > .. parsed-literal:: > > - # |qemu_system_x86| \ > - ...... > - -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \ > - -machine ...,memory-encryption=sev0 > + # |qemu_system_x86| \\ > + ...... \\ > + -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\ > + -machine ...,memory-encryption=sev0 \\ > ..... > > ``-object authz-simple,id=id,identity=string`` > @@ -4962,9 +4962,9 @@ SRST > > .. parsed-literal:: > > - # |qemu_system| \ > - ... > - -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \ > + # |qemu_system| \\ > + ... \\ > + -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\ > ... > > Note the use of quotes due to the x509 distinguished name > @@ -5013,9 +5013,9 @@ SRST > > .. parsed-literal:: > > - # |qemu_system| \ > - ... > - -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes > + # |qemu_system| \\ > + ... \\ > + -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\ > ... > > ``-object authz-pam,id=id,service=string`` > @@ -5032,9 +5032,9 @@ SRST > > .. parsed-literal:: > > - # |qemu_system| \ > - ... > - -object authz-pam,id=auth0,service=qemu-vnc > + # |qemu_system| \\ > + ... \\ > + -object authz-pam,id=auth0,service=qemu-vnc \\ > ... > > There would then be a corresponding config file for PAM at >
On 09/10/20 12:23, Philippe Mathieu-Daudé wrote: > Cc'ing qemu-trivial@ Thanks! The patch was posted a week ago (and reviewed as well, by you, thanks!) -- is there something I need to do for getting this merged? Thank you Laszlo > On 9/8/20 7:21 PM, Laszlo Ersek wrote: >> According to >> <https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>, >> "inline markup is recognized and there is no protection from parsing. >> Backslash-escapes may be necessary to prevent unintended parsing". >> >> The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong >> lines on my system. A stand-alone backslash at EOL serves as line >> continuation in a "parsed-literal" block. Therefore, escape the >> backslashes that we want to appear as such in the formatted documentation. >> >> Cc: Peter Maydell <peter.maydell@linaro.org> >> Signed-off-by: Laszlo Ersek <lersek@redhat.com> >> --- >> >> Notes: >> Resending with Peter's email address in the Cc: tag fixed. Sorry! >> >> docs/system/device-url-syntax.rst.inc | 8 +- >> qemu-options.hx | 108 ++++++++++---------- >> 2 files changed, 58 insertions(+), 58 deletions(-) >> >> diff --git a/docs/system/device-url-syntax.rst.inc b/docs/system/device-url-syntax.rst.inc >> index 88d7a372a748..6f6ec8366b7a 100644 >> --- a/docs/system/device-url-syntax.rst.inc >> +++ b/docs/system/device-url-syntax.rst.inc >> @@ -25,8 +25,8 @@ These are specified using a special URL syntax. >> >> .. parsed-literal:: >> >> - |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ >> - -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ >> + |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\ >> + -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\ >> -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 >> >> Example (CHAP username/password via URL): >> @@ -39,8 +39,8 @@ These are specified using a special URL syntax. >> >> .. parsed-literal:: >> >> - LIBISCSI_CHAP_USERNAME="user" \ >> - LIBISCSI_CHAP_PASSWORD="password" \ >> + LIBISCSI_CHAP_USERNAME="user" \\ >> + LIBISCSI_CHAP_PASSWORD="password" \\ >> |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 >> >> ``NBD`` >> diff --git a/qemu-options.hx b/qemu-options.hx >> index b0f020594eab..47f64be0c041 100644 >> --- a/qemu-options.hx >> +++ b/qemu-options.hx >> @@ -373,9 +373,9 @@ SRST >> >> .. parsed-literal:: >> >> - |qemu_system| \ >> - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ >> - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ >> + |qemu_system| \\ >> + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\ >> + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\ >> -drive file=/dev/fdset/2,index=0,media=disk >> ERST >> >> @@ -1338,9 +1338,9 @@ SRST >> >> .. parsed-literal:: >> >> - |qemu_system| \ >> - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ >> - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ >> + |qemu_system| \\ >> + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\ >> + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\ >> -drive file=/dev/fdset/2,index=0,media=disk >> >> You can connect a CDROM to the slave of ide0: >> @@ -2593,7 +2593,7 @@ SRST >> >> .. parsed-literal:: >> >> - |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \ >> + |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\ >> -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 >> >> ``smb=dir[,smbserver=addr]`` >> @@ -2703,15 +2703,15 @@ SRST >> >> #launch a QEMU instance with two NICs, each one connected >> #to a TAP device >> - |qemu_system| linux.img \ >> - -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \ >> + |qemu_system| linux.img \\ >> + -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\ >> -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1 >> >> .. parsed-literal:: >> >> #launch a QEMU instance with the default network helper to >> #connect a TAP device to bridge br0 >> - |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \ >> + |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\ >> -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper" >> >> ``-netdev bridge,id=id[,br=bridge][,helper=helper]`` >> @@ -2749,12 +2749,12 @@ SRST >> .. parsed-literal:: >> >> # launch a first QEMU instance >> - |qemu_system| linux.img \ >> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ >> + |qemu_system| linux.img \\ >> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ >> -netdev socket,id=n1,listen=:1234 >> # connect the network of this instance to the network of the first instance >> - |qemu_system| linux.img \ >> - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \ >> + |qemu_system| linux.img \\ >> + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\ >> -netdev socket,id=n2,connect=127.0.0.1:1234 >> >> ``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]`` >> @@ -2776,16 +2776,16 @@ SRST >> .. parsed-literal:: >> >> # launch one QEMU instance >> - |qemu_system| linux.img \ >> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ >> + |qemu_system| linux.img \\ >> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ >> -netdev socket,id=n1,mcast=230.0.0.1:1234 >> # launch another QEMU instance on same "bus" >> - |qemu_system| linux.img \ >> - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \ >> + |qemu_system| linux.img \\ >> + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\ >> -netdev socket,id=n2,mcast=230.0.0.1:1234 >> # launch yet another QEMU instance on same "bus" >> - |qemu_system| linux.img \ >> - -device e1000,netdev=n3,mac=52:54:00:12:34:58 \ >> + |qemu_system| linux.img \\ >> + -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\ >> -netdev socket,id=n3,mcast=230.0.0.1:1234 >> >> Example (User Mode Linux compat.): >> @@ -2793,8 +2793,8 @@ SRST >> .. parsed-literal:: >> >> # launch QEMU instance (note mcast address selected is UML's default) >> - |qemu_system| linux.img \ >> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ >> + |qemu_system| linux.img \\ >> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ >> -netdev socket,id=n1,mcast=239.192.168.1:1102 >> # launch UML >> /path/to/linux ubd0=/path/to/root_fs eth0=mcast >> @@ -2803,8 +2803,8 @@ SRST >> >> .. parsed-literal:: >> >> - |qemu_system| linux.img \ >> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ >> + |qemu_system| linux.img \\ >> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ >> -netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4 >> >> ``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]`` >> @@ -2860,9 +2860,9 @@ SRST >> >> # Setup tunnel on linux host using raw ip as encapsulation >> # on 1.2.3.4 >> - ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \ >> + ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\ >> encap udp udp_sport 16384 udp_dport 16384 >> - ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \ >> + ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\ >> 0xFFFFFFFF peer_session_id 0xFFFFFFFF >> ifconfig vmtunnel0 mtu 1500 >> ifconfig vmtunnel0 up >> @@ -2872,7 +2872,7 @@ SRST >> # on 4.3.2.1 >> # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter >> >> - |qemu_system| linux.img -device e1000,netdev=n1 \ >> + |qemu_system| linux.img -device e1000,netdev=n1 \\ >> -netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter >> >> ``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]`` >> @@ -4627,8 +4627,8 @@ SRST >> >> .. parsed-literal:: >> >> - # |qemu_system| \ >> - -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \ >> + # |qemu_system| \\ >> + -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\ >> -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0 >> >> ``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]`` >> @@ -4791,10 +4791,10 @@ SRST >> >> .. parsed-literal:: >> >> - # |qemu_system| \ >> - [...] \ >> - -object cryptodev-backend-builtin,id=cryptodev0 \ >> - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ >> + # |qemu_system| \\ >> + [...] \\ >> + -object cryptodev-backend-builtin,id=cryptodev0 \\ >> + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\ >> [...] >> >> ``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]`` >> @@ -4810,11 +4810,11 @@ SRST >> >> .. parsed-literal:: >> >> - # |qemu_system| \ >> - [...] \ >> - -chardev socket,id=chardev0,path=/path/to/socket \ >> - -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \ >> - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ >> + # |qemu_system| \\ >> + [...] \\ >> + -chardev socket,id=chardev0,path=/path/to/socket \\ >> + -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\ >> + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\ >> [...] >> >> ``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]`` >> @@ -4892,9 +4892,9 @@ SRST >> >> .. parsed-literal:: >> >> - # |qemu_system| \ >> - -object secret,id=secmaster0,format=base64,file=key.b64 \ >> - -object secret,id=sec0,keyid=secmaster0,format=base64,\ >> + # |qemu_system| \\ >> + -object secret,id=secmaster0,format=base64,file=key.b64 \\ >> + -object secret,id=sec0,keyid=secmaster0,format=base64,\\ >> data=$SECRET,iv=$(<iv.b64) >> >> ``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]`` >> @@ -4941,10 +4941,10 @@ SRST >> >> .. parsed-literal:: >> >> - # |qemu_system_x86| \ >> - ...... >> - -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \ >> - -machine ...,memory-encryption=sev0 >> + # |qemu_system_x86| \\ >> + ...... \\ >> + -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\ >> + -machine ...,memory-encryption=sev0 \\ >> ..... >> >> ``-object authz-simple,id=id,identity=string`` >> @@ -4962,9 +4962,9 @@ SRST >> >> .. parsed-literal:: >> >> - # |qemu_system| \ >> - ... >> - -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \ >> + # |qemu_system| \\ >> + ... \\ >> + -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\ >> ... >> >> Note the use of quotes due to the x509 distinguished name >> @@ -5013,9 +5013,9 @@ SRST >> >> .. parsed-literal:: >> >> - # |qemu_system| \ >> - ... >> - -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes >> + # |qemu_system| \\ >> + ... \\ >> + -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\ >> ... >> >> ``-object authz-pam,id=id,service=string`` >> @@ -5032,9 +5032,9 @@ SRST >> >> .. parsed-literal:: >> >> - # |qemu_system| \ >> - ... >> - -object authz-pam,id=auth0,service=qemu-vnc >> + # |qemu_system| \\ >> + ... \\ >> + -object authz-pam,id=auth0,service=qemu-vnc \\ >> ... >> >> There would then be a corresponding config file for PAM at >> > >
Le 15/09/2020 à 09:57, Laszlo Ersek a écrit : > On 09/10/20 12:23, Philippe Mathieu-Daudé wrote: >> Cc'ing qemu-trivial@ > > Thanks! > > The patch was posted a week ago (and reviewed as well, by you, thanks!) > -- is there something I need to do for getting this merged? Applied to my trivial-patches branch. Thanks, Laurent
On 09/16/20 10:53, Laurent Vivier wrote: > Le 15/09/2020 à 09:57, Laszlo Ersek a écrit : >> On 09/10/20 12:23, Philippe Mathieu-Daudé wrote: >>> Cc'ing qemu-trivial@ >> >> Thanks! >> >> The patch was posted a week ago (and reviewed as well, by you, thanks!) >> -- is there something I need to do for getting this merged? > > Applied to my trivial-patches branch. Awesome, thanks! Laszlo
© 2016 - 2024 Red Hat, Inc.