Nothing earth-shaking in here, just a lot of refactoring and cleanup and a few bugfixes. I suspect I'll have another pullreq to come in the early part of next week... The following changes since commit 19591e9e0938ea5066984553c256a043bd5d822f: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2020-08-27 16:59:02 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200828 for you to fetch changes up to ed78849d9711805bda37ee026018d6ee7a606d0e: target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd (2020-08-28 10:02:50 +0100) ---------------------------------------------------------------- target-arm queue: * target/arm: Cleanup and refactoring preparatory to SVE2 * armsse: Define ARMSSEClass correctly * hw/misc/unimp: Improve information provided in log messages * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers * target/arm: Fill in the WnR syndrome bit in mte_check_fail * target/arm: Clarify HCR_EL2 ARMCPRegInfo type * hw/arm/musicpal: Use AddressSpace for DMA transfers * hw/clock: Minor cleanups * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs ---------------------------------------------------------------- Eduardo Habkost (1): armsse: Define ARMSSEClass correctly Graeme Gregory (1): hw/arm/sbsa-ref: fix typo breaking PCIe IRQs Philippe Mathieu-Daudé (14): hw/clock: Remove unused clock_init*() functions hw/clock: Let clock_set() return boolean value hw/clock: Only propagate clock changes if the clock is changed hw/arm/musicpal: Use AddressSpace for DMA transfers target/arm: Clarify HCR_EL2 ARMCPRegInfo type hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers hw/arm/xilinx_zynq: Uninline cadence_uart_create() hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize hw/qdev-clock: Uninline qdev_connect_clock_in() hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize hw/misc/unimp: Display value after offset hw/misc/unimp: Display the value with width of the access size hw/misc/unimp: Display the offset with width of the region size Richard Henderson (19): target/arm: Pass the entire mte descriptor to mte_check_fail target/arm: Fill in the WnR syndrome bit in mte_check_fail qemu/int128: Add int128_lshift target/arm: Split out gen_gvec_fn_zz target/arm: Split out gen_gvec_fn_zzz, do_zzz_fn target/arm: Rearrange {sve,fp}_check_access assert target/arm: Merge do_vector2_p into do_mov_p target/arm: Clean up 4-operand predicate expansion target/arm: Use tcg_gen_gvec_bitsel for trans_SEL_pppp target/arm: Split out gen_gvec_ool_zzzp target/arm: Merge helper_sve_clr_* and helper_sve_movz_* target/arm: Split out gen_gvec_ool_zzp target/arm: Split out gen_gvec_ool_zzz target/arm: Split out gen_gvec_ool_zz target/arm: Tidy SVE tszimm shift formats target/arm: Generalize inl_qrdmlah_* helper functions target/arm: Convert integer multiply (indexed) to gvec for aa64 advsimd target/arm: Convert integer multiply-add (indexed) to gvec for aa64 advsimd target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd include/hw/arm/armsse.h | 2 +- include/hw/char/cadence_uart.h | 17 -- include/hw/clock.h | 30 +-- include/hw/misc/unimp.h | 1 + include/hw/net/allwinner-sun8i-emac.h | 6 + include/hw/qdev-clock.h | 8 +- include/hw/sd/allwinner-sdhost.h | 6 + include/qemu/int128.h | 16 ++ target/arm/helper-sve.h | 5 - target/arm/helper.h | 28 +++ target/arm/translate.h | 1 + target/arm/sve.decode | 35 ++- hw/arm/allwinner-a10.c | 2 + hw/arm/allwinner-h3.c | 4 + hw/arm/armsse.c | 1 + hw/arm/musicpal.c | 45 ++-- hw/arm/sbsa-ref.c | 2 +- hw/arm/xilinx_zynq.c | 24 +- hw/core/clock.c | 7 +- hw/core/qdev-clock.c | 6 + hw/misc/unimp.c | 14 +- hw/net/allwinner-sun8i-emac.c | 46 ++-- hw/sd/allwinner-sdhost.c | 37 +++- target/arm/helper.c | 1 - target/arm/mte_helper.c | 19 +- target/arm/sve_helper.c | 70 ++---- target/arm/translate-a64.c | 110 ++++++++-- target/arm/translate-sve.c | 399 ++++++++++++++-------------------- target/arm/vec_helper.c | 182 +++++++++++----- 29 files changed, 629 insertions(+), 495 deletions(-) From: Graeme Gregory <graeme@nuviainc.com> Fixing a typo in a previous patch that translated an "i" to a 1 and therefore breaking the allocation of PCIe interrupts. This was discovered when virtio-net-pci devices ceased to function correctly. Cc: qemu-stable@nongnu.org Fixes: 48ba18e6d3f3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state") Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200821083853.356490-1-graeme@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void create_pcie(SBSAMachineState *sms) for (i = 0; i < GPEX_NUM_IRQS; i++) { sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, - qdev_get_gpio_in(sms->gic, irq + 1)); + qdev_get_gpio_in(sms->gic, irq + i)); gpex_set_irq_num(GPEX_HOST(dev), i, irq + i); } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> clock_init*() inlined funtions are simple wrappers around clock_set*() and are not used. Remove them in favor of clock_set*(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200806123858.30058-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ static inline bool clock_is_enabled(const Clock *clk) return clock_get(clk) != 0; } -static inline void clock_init(Clock *clk, uint64_t value) -{ - clock_set(clk, value); -} -static inline void clock_init_hz(Clock *clk, uint64_t value) -{ - clock_set_hz(clk, value); -} -static inline void clock_init_ns(Clock *clk, uint64_t value) -{ - clock_set_ns(clk, value); -} - #endif /* QEMU_HW_CLOCK_H */ -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Let clock_set() return a boolean value whether the clock has been updated or not. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200806123858.30058-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 12 +++++++----- hw/core/clock.c | 7 ++++++- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_set_source(Clock *clk, Clock *src); * @value: the clock's value, 0 means unclocked * * Set the local cached period value of @clk to @value. + * + * @return: true if the clock is changed. */ -void clock_set(Clock *clk, uint64_t value); +bool clock_set(Clock *clk, uint64_t value); -static inline void clock_set_hz(Clock *clk, unsigned hz) +static inline bool clock_set_hz(Clock *clk, unsigned hz) { - clock_set(clk, CLOCK_PERIOD_FROM_HZ(hz)); + return clock_set(clk, CLOCK_PERIOD_FROM_HZ(hz)); } -static inline void clock_set_ns(Clock *clk, unsigned ns) +static inline bool clock_set_ns(Clock *clk, unsigned ns) { - clock_set(clk, CLOCK_PERIOD_FROM_NS(ns)); + return clock_set(clk, CLOCK_PERIOD_FROM_NS(ns)); } /** diff --git a/hw/core/clock.c b/hw/core/clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/clock.c +++ b/hw/core/clock.c @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk) clock_set_callback(clk, NULL, NULL); } -void clock_set(Clock *clk, uint64_t period) +bool clock_set(Clock *clk, uint64_t period) { + if (clk->period == period) { + return false; + } trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_NS(clk->period), CLOCK_PERIOD_TO_NS(period)); clk->period = period; + + return true; } static void clock_propagate_period(Clock *clk, bool call_callbacks) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Avoid propagating the clock change when the clock does not change. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200806123858.30058-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_propagate(Clock *clk); */ static inline void clock_update(Clock *clk, uint64_t value) { - clock_set(clk, value); - clock_propagate(clk); + if (clock_set(clk, value)) { + clock_propagate(clk); + } } static inline void clock_update_hz(Clock *clk, unsigned hz) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Allow the device to execute the DMA transfers in a different AddressSpace. We keep using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200814125533.4047-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ #include "hw/audio/wm8750.h" #include "sysemu/block-backend.h" #include "sysemu/runstate.h" +#include "sysemu/dma.h" #include "exec/address-spaces.h" #include "ui/pixel_ops.h" #include "qemu/cutils.h" @@ -XXX,XX +XXX,XX @@ typedef struct mv88w8618_eth_state { MemoryRegion iomem; qemu_irq irq; + MemoryRegion *dma_mr; + AddressSpace dma_as; uint32_t smir; uint32_t icr; uint32_t imr; @@ -XXX,XX +XXX,XX @@ typedef struct mv88w8618_eth_state { NICConf conf; } mv88w8618_eth_state; -static void eth_rx_desc_put(uint32_t addr, mv88w8618_rx_desc *desc) +static void eth_rx_desc_put(AddressSpace *dma_as, uint32_t addr, + mv88w8618_rx_desc *desc) { cpu_to_le32s(&desc->cmdstat); cpu_to_le16s(&desc->bytes); cpu_to_le16s(&desc->buffer_size); cpu_to_le32s(&desc->buffer); cpu_to_le32s(&desc->next); - cpu_physical_memory_write(addr, desc, sizeof(*desc)); + dma_memory_write(dma_as, addr, desc, sizeof(*desc)); } -static void eth_rx_desc_get(uint32_t addr, mv88w8618_rx_desc *desc) +static void eth_rx_desc_get(AddressSpace *dma_as, uint32_t addr, + mv88w8618_rx_desc *desc) { - cpu_physical_memory_read(addr, desc, sizeof(*desc)); + dma_memory_read(dma_as, addr, desc, sizeof(*desc)); le32_to_cpus(&desc->cmdstat); le16_to_cpus(&desc->bytes); le16_to_cpus(&desc->buffer_size); @@ -XXX,XX +XXX,XX @@ static ssize_t eth_receive(NetClientState *nc, const uint8_t *buf, size_t size) continue; } do { - eth_rx_desc_get(desc_addr, &desc); + eth_rx_desc_get(&s->dma_as, desc_addr, &desc); if ((desc.cmdstat & MP_ETH_RX_OWN) && desc.buffer_size >= size) { - cpu_physical_memory_write(desc.buffer + s->vlan_header, + dma_memory_write(&s->dma_as, desc.buffer + s->vlan_header, buf, size); desc.bytes = size + s->vlan_header; desc.cmdstat &= ~MP_ETH_RX_OWN; @@ -XXX,XX +XXX,XX @@ static ssize_t eth_receive(NetClientState *nc, const uint8_t *buf, size_t size) if (s->icr & s->imr) { qemu_irq_raise(s->irq); } - eth_rx_desc_put(desc_addr, &desc); + eth_rx_desc_put(&s->dma_as, desc_addr, &desc); return size; } desc_addr = desc.next; @@ -XXX,XX +XXX,XX @@ static ssize_t eth_receive(NetClientState *nc, const uint8_t *buf, size_t size) return size; } -static void eth_tx_desc_put(uint32_t addr, mv88w8618_tx_desc *desc) +static void eth_tx_desc_put(AddressSpace *dma_as, uint32_t addr, + mv88w8618_tx_desc *desc) { cpu_to_le32s(&desc->cmdstat); cpu_to_le16s(&desc->res); cpu_to_le16s(&desc->bytes); cpu_to_le32s(&desc->buffer); cpu_to_le32s(&desc->next); - cpu_physical_memory_write(addr, desc, sizeof(*desc)); + dma_memory_write(dma_as, addr, desc, sizeof(*desc)); } -static void eth_tx_desc_get(uint32_t addr, mv88w8618_tx_desc *desc) +static void eth_tx_desc_get(AddressSpace *dma_as, uint32_t addr, + mv88w8618_tx_desc *desc) { - cpu_physical_memory_read(addr, desc, sizeof(*desc)); + dma_memory_read(dma_as, addr, desc, sizeof(*desc)); le32_to_cpus(&desc->cmdstat); le16_to_cpus(&desc->res); le16_to_cpus(&desc->bytes); @@ -XXX,XX +XXX,XX @@ static void eth_send(mv88w8618_eth_state *s, int queue_index) int len; do { - eth_tx_desc_get(desc_addr, &desc); + eth_tx_desc_get(&s->dma_as, desc_addr, &desc); next_desc = desc.next; if (desc.cmdstat & MP_ETH_TX_OWN) { len = desc.bytes; if (len < 2048) { - cpu_physical_memory_read(desc.buffer, buf, len); + dma_memory_read(&s->dma_as, desc.buffer, buf, len); qemu_send_packet(qemu_get_queue(s->nic), buf, len); } desc.cmdstat &= ~MP_ETH_TX_OWN; s->icr |= 1 << (MP_ETH_IRQ_TXLO_BIT - queue_index); - eth_tx_desc_put(desc_addr, &desc); + eth_tx_desc_put(&s->dma_as, desc_addr, &desc); } desc_addr = next_desc; } while (desc_addr != s->tx_queue[queue_index]); @@ -XXX,XX +XXX,XX @@ static void mv88w8618_eth_realize(DeviceState *dev, Error **errp) { mv88w8618_eth_state *s = MV88W8618_ETH(dev); + if (!s->dma_mr) { + error_setg(errp, TYPE_MV88W8618_ETH " 'dma-memory' link not set"); + return; + } + + address_space_init(&s->dma_as, s->dma_mr, "emac-dma"); s->nic = qemu_new_nic(&net_mv88w8618_info, &s->conf, object_get_typename(OBJECT(dev)), dev->id, s); } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription mv88w8618_eth_vmsd = { static Property mv88w8618_eth_properties[] = { DEFINE_NIC_PROPERTIES(mv88w8618_eth_state, conf), + DEFINE_PROP_LINK("dma-memory", mv88w8618_eth_state, dma_mr, + TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) qemu_check_nic_model(&nd_table[0], "mv88w8618"); dev = qdev_new(TYPE_MV88W8618_ETH); qdev_set_nic_properties(dev, &nd_table[0]); + object_property_set_link(OBJECT(dev), "dma-memory", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, MP_ETH_BASE); sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[MP_ETH_IRQ]); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> In commit ce4afed839 ("target/arm: Implement AArch32 HCR and HCR2") the HCR_EL2 register has been changed from type NO_RAW (no underlying state and does not support raw access for state saving/loading) to type CONST (TCG can assume the value to be constant), removing the read/write accessors. We forgot to remove the previous type ARM_CP_NO_RAW. This is not really a problem since the field is overwritten. However it makes code review confuse, so remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200812111223.7787-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = { .access = PL2_RW, .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore }, { .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH, - .type = ARM_CP_NO_RAW, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We need more information than just the mmu_idx in order to create the proper exception syndrome. Only change the function signature so far. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200813200816.3037186-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) } /* Record a tag check failure. */ -static void mte_check_fail(CPUARMState *env, int mmu_idx, +static void mte_check_fail(CPUARMState *env, uint32_t desc, uint64_t dirty_ptr, uintptr_t ra) { + int mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); ARMMMUIdx arm_mmu_idx = core_to_aa64_mmu_idx(mmu_idx); int el, reg_el, tcf, select; uint64_t sctlr; @@ -XXX,XX +XXX,XX @@ uint64_t mte_check1(CPUARMState *env, uint32_t desc, } if (unlikely(!mte_probe1_int(env, desc, ptr, ra, bit55))) { - int mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); - mte_check_fail(env, mmu_idx, ptr, ra); + mte_check_fail(env, desc, ptr, ra); } return useronly_clean_ptr(ptr); @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, fail_ofs = tag_first + n * TAG_GRANULE - ptr; fail_ofs = ROUND_UP(fail_ofs, esize); - mte_check_fail(env, mmu_idx, ptr + fail_ofs, ra); + mte_check_fail(env, desc, ptr + fail_ofs, ra); } done: @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(mte_check_zva)(CPUARMState *env, uint32_t desc, uint64_t ptr) fail: /* Locate the first nibble that differs. */ i = ctz64(mem_tag ^ ptr_tag) >> 4; - mte_check_fail(env, mmu_idx, align_ptr + i * TAG_GRANULE, ra); + mte_check_fail(env, desc, align_ptr + i * TAG_GRANULE, ra); done: return useronly_clean_ptr(ptr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> According to AArch64.TagCheckFault, none of the other ISS values are provided, so we do not need to go so far as merge_syn_data_abort. But we were missing the WnR bit. Tested-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200813200816.3037186-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc, { int mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); ARMMMUIdx arm_mmu_idx = core_to_aa64_mmu_idx(mmu_idx); - int el, reg_el, tcf, select; + int el, reg_el, tcf, select, is_write, syn; uint64_t sctlr; reg_el = regime_el(env, arm_mmu_idx); @@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc, */ cpu_restore_state(env_cpu(env), ra, true); env->exception.vaddress = dirty_ptr; - raise_exception(env, EXCP_DATA_ABORT, - syn_data_abort_no_iss(el != 0, 0, 0, 0, 0, 0, 0x11), - exception_target_el(env)); + + is_write = FIELD_EX32(desc, MTEDESC, WRITE); + syn = syn_data_abort_no_iss(el != 0, 0, 0, 0, 0, is_write, 0x11); + raise_exception(env, EXCP_DATA_ABORT, syn, exception_target_el(env)); /* noreturn, but fall through to the assert anyway */ case 0: -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Allow the device to execute the DMA transfers in a different AddressSpace. The A10 and H3 SoC keep using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200814110057.307-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/allwinner-sdhost.h | 6 ++++++ hw/arm/allwinner-a10.c | 2 ++ hw/arm/allwinner-h3.c | 2 ++ hw/sd/allwinner-sdhost.c | 37 ++++++++++++++++++++++++++------ 4 files changed, 41 insertions(+), 6 deletions(-) diff --git a/include/hw/sd/allwinner-sdhost.h b/include/hw/sd/allwinner-sdhost.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/allwinner-sdhost.h +++ b/include/hw/sd/allwinner-sdhost.h @@ -XXX,XX +XXX,XX @@ typedef struct AwSdHostState { /** Interrupt output signal to notify CPU */ qemu_irq irq; + /** Memory region where DMA transfers are done */ + MemoryRegion *dma_mr; + + /** Address space used internally for DMA transfers */ + AddressSpace dma_as; + /** Number of bytes left in current DMA transfer */ uint32_t transfer_cnt; diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) } /* SD/MMC */ + object_property_set_link(OBJECT(&s->mmc0), "dma-memory", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize(SYS_BUS_DEVICE(&s->mmc0), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, AW_A10_MMC0_BASE); sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, qdev_get_gpio_in(dev, 32)); diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->sid), 0, s->memmap[AW_H3_SID]); /* SD/MMC */ + object_property_set_link(OBJECT(&s->mmc0), "dma-memory", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize(SYS_BUS_DEVICE(&s->mmc0), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, s->memmap[AW_H3_MMC0]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, diff --git a/hw/sd/allwinner-sdhost.c b/hw/sd/allwinner-sdhost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/allwinner-sdhost.c +++ b/hw/sd/allwinner-sdhost.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qemu/module.h" #include "qemu/units.h" +#include "qapi/error.h" #include "sysemu/blockdev.h" +#include "sysemu/dma.h" +#include "hw/qdev-properties.h" #include "hw/irq.h" #include "hw/sd/allwinner-sdhost.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sdhost_process_desc(AwSdHostState *s, uint8_t buf[1024]; /* Read descriptor */ - cpu_physical_memory_read(desc_addr, desc, sizeof(*desc)); + dma_memory_read(&s->dma_as, desc_addr, desc, sizeof(*desc)); if (desc->size == 0) { desc->size = klass->max_desc_size; } else if (desc->size > klass->max_desc_size) { @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sdhost_process_desc(AwSdHostState *s, /* Write to SD bus */ if (is_write) { - cpu_physical_memory_read((desc->addr & DESC_SIZE_MASK) + num_done, - buf, buf_bytes); + dma_memory_read(&s->dma_as, + (desc->addr & DESC_SIZE_MASK) + num_done, + buf, buf_bytes); sdbus_write_data(&s->sdbus, buf, buf_bytes); /* Read from SD bus */ } else { sdbus_read_data(&s->sdbus, buf, buf_bytes); - cpu_physical_memory_write((desc->addr & DESC_SIZE_MASK) + num_done, - buf, buf_bytes); + dma_memory_write(&s->dma_as, + (desc->addr & DESC_SIZE_MASK) + num_done, + buf, buf_bytes); } num_done += buf_bytes; } /* Clear hold flag and flush descriptor */ desc->status &= ~DESC_STATUS_HOLD; - cpu_physical_memory_write(desc_addr, desc, sizeof(*desc)); + dma_memory_write(&s->dma_as, desc_addr, desc, sizeof(*desc)); return num_done; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_allwinner_sdhost = { } }; +static Property allwinner_sdhost_properties[] = { + DEFINE_PROP_LINK("dma-memory", AwSdHostState, dma_mr, + TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_END_OF_LIST(), +}; + static void allwinner_sdhost_init(Object *obj) { AwSdHostState *s = AW_SDHOST(obj); @@ -XXX,XX +XXX,XX @@ static void allwinner_sdhost_init(Object *obj) sysbus_init_irq(SYS_BUS_DEVICE(s), &s->irq); } +static void allwinner_sdhost_realize(DeviceState *dev, Error **errp) +{ + AwSdHostState *s = AW_SDHOST(dev); + + if (!s->dma_mr) { + error_setg(errp, TYPE_AW_SDHOST " 'dma-memory' link not set"); + return; + } + + address_space_init(&s->dma_as, s->dma_mr, "sdhost-dma"); +} + static void allwinner_sdhost_reset(DeviceState *dev) { AwSdHostState *s = AW_SDHOST(dev); @@ -XXX,XX +XXX,XX @@ static void allwinner_sdhost_class_init(ObjectClass *klass, void *data) dc->reset = allwinner_sdhost_reset; dc->vmsd = &vmstate_allwinner_sdhost; + dc->realize = allwinner_sdhost_realize; + device_class_set_props(dc, allwinner_sdhost_properties); } static void allwinner_sdhost_sun4i_class_init(ObjectClass *klass, void *data) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Allow the device to execute the DMA transfers in a different AddressSpace. The H3 SoC keeps using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200814122907.27732-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/allwinner-sun8i-emac.h | 6 ++++ hw/arm/allwinner-h3.c | 2 ++ hw/net/allwinner-sun8i-emac.c | 46 +++++++++++++++++---------- 3 files changed, 38 insertions(+), 16 deletions(-) diff --git a/include/hw/net/allwinner-sun8i-emac.h b/include/hw/net/allwinner-sun8i-emac.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/allwinner-sun8i-emac.h +++ b/include/hw/net/allwinner-sun8i-emac.h @@ -XXX,XX +XXX,XX @@ typedef struct AwSun8iEmacState { /** Interrupt output signal to notify CPU */ qemu_irq irq; + /** Memory region where DMA transfers are done */ + MemoryRegion *dma_mr; + + /** Address space used internally for DMA transfers */ + AddressSpace dma_as; + /** Generic Network Interface Controller (NIC) for networking API */ NICState *nic; diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qemu_check_nic_model(&nd_table[0], TYPE_AW_SUN8I_EMAC); qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]); } + object_property_set_link(OBJECT(&s->emac), "dma-memory", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize(SYS_BUS_DEVICE(&s->emac), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->emac), 0, s->memmap[AW_H3_EMAC]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->emac), 0, diff --git a/hw/net/allwinner-sun8i-emac.c b/hw/net/allwinner-sun8i-emac.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/allwinner-sun8i-emac.c +++ b/hw/net/allwinner-sun8i-emac.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" +#include "qapi/error.h" #include "hw/sysbus.h" #include "migration/vmstate.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "net/checksum.h" #include "qemu/module.h" #include "exec/cpu-common.h" +#include "sysemu/dma.h" #include "hw/net/allwinner-sun8i-emac.h" /* EMAC register offsets */ @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_update_irq(AwSun8iEmacState *s) qemu_set_irq(s->irq, (s->int_sta & s->int_en) != 0); } -static uint32_t allwinner_sun8i_emac_next_desc(FrameDescriptor *desc, +static uint32_t allwinner_sun8i_emac_next_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, size_t min_size) { uint32_t paddr = desc->next; - cpu_physical_memory_read(paddr, desc, sizeof(*desc)); + dma_memory_read(&s->dma_as, paddr, desc, sizeof(*desc)); if ((desc->status & DESC_STATUS_CTL) && (desc->status2 & DESC_STATUS2_BUF_SIZE_MASK) >= min_size) { @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sun8i_emac_next_desc(FrameDescriptor *desc, } } -static uint32_t allwinner_sun8i_emac_get_desc(FrameDescriptor *desc, +static uint32_t allwinner_sun8i_emac_get_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, uint32_t start_addr, size_t min_size) { @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sun8i_emac_get_desc(FrameDescriptor *desc, /* Note that the list is a cycle. Last entry points back to the head. */ while (desc_addr != 0) { - cpu_physical_memory_read(desc_addr, desc, sizeof(*desc)); + dma_memory_read(&s->dma_as, desc_addr, desc, sizeof(*desc)); if ((desc->status & DESC_STATUS_CTL) && (desc->status2 & DESC_STATUS2_BUF_SIZE_MASK) >= min_size) { @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sun8i_emac_rx_desc(AwSun8iEmacState *s, FrameDescriptor *desc, size_t min_size) { - return allwinner_sun8i_emac_get_desc(desc, s->rx_desc_curr, min_size); + return allwinner_sun8i_emac_get_desc(s, desc, s->rx_desc_curr, min_size); } static uint32_t allwinner_sun8i_emac_tx_desc(AwSun8iEmacState *s, FrameDescriptor *desc, size_t min_size) { - return allwinner_sun8i_emac_get_desc(desc, s->tx_desc_head, min_size); + return allwinner_sun8i_emac_get_desc(s, desc, s->tx_desc_head, min_size); } -static void allwinner_sun8i_emac_flush_desc(FrameDescriptor *desc, +static void allwinner_sun8i_emac_flush_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, uint32_t phys_addr) { - cpu_physical_memory_write(phys_addr, desc, sizeof(*desc)); + dma_memory_write(&s->dma_as, phys_addr, desc, sizeof(*desc)); } static bool allwinner_sun8i_emac_can_receive(NetClientState *nc) @@ -XXX,XX +XXX,XX @@ static ssize_t allwinner_sun8i_emac_receive(NetClientState *nc, << RX_DESC_STATUS_FRM_LEN_SHIFT; } - cpu_physical_memory_write(desc.addr, buf, desc_bytes); - allwinner_sun8i_emac_flush_desc(&desc, s->rx_desc_curr); + dma_memory_write(&s->dma_as, desc.addr, buf, desc_bytes); + allwinner_sun8i_emac_flush_desc(s, &desc, s->rx_desc_curr); trace_allwinner_sun8i_emac_receive(s->rx_desc_curr, desc.addr, desc_bytes); @@ -XXX,XX +XXX,XX @@ static ssize_t allwinner_sun8i_emac_receive(NetClientState *nc, bytes_left -= desc_bytes; /* Move to the next descriptor */ - s->rx_desc_curr = allwinner_sun8i_emac_next_desc(&desc, 64); + s->rx_desc_curr = allwinner_sun8i_emac_next_desc(s, &desc, 64); if (!s->rx_desc_curr) { /* Not enough buffer space available */ s->int_sta |= INT_STA_RX_BUF_UA; @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_transmit(AwSun8iEmacState *s) desc.status |= TX_DESC_STATUS_LENGTH_ERR; break; } - cpu_physical_memory_read(desc.addr, packet_buf + packet_bytes, bytes); + dma_memory_read(&s->dma_as, desc.addr, packet_buf + packet_bytes, bytes); packet_bytes += bytes; desc.status &= ~DESC_STATUS_CTL; - allwinner_sun8i_emac_flush_desc(&desc, s->tx_desc_curr); + allwinner_sun8i_emac_flush_desc(s, &desc, s->tx_desc_curr); /* After the last descriptor, send the packet */ if (desc.status2 & TX_DESC_STATUS2_LAST_DESC) { @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_transmit(AwSun8iEmacState *s) packet_bytes = 0; transmitted++; } - s->tx_desc_curr = allwinner_sun8i_emac_next_desc(&desc, 0); + s->tx_desc_curr = allwinner_sun8i_emac_next_desc(s, &desc, 0); } /* Raise transmit completed interrupt */ @@ -XXX,XX +XXX,XX @@ static uint64_t allwinner_sun8i_emac_read(void *opaque, hwaddr offset, break; case REG_TX_CUR_BUF: /* Transmit Current Buffer */ if (s->tx_desc_curr != 0) { - cpu_physical_memory_read(s->tx_desc_curr, &desc, sizeof(desc)); + dma_memory_read(&s->dma_as, s->tx_desc_curr, &desc, sizeof(desc)); value = desc.addr; } else { value = 0; @@ -XXX,XX +XXX,XX @@ static uint64_t allwinner_sun8i_emac_read(void *opaque, hwaddr offset, break; case REG_RX_CUR_BUF: /* Receive Current Buffer */ if (s->rx_desc_curr != 0) { - cpu_physical_memory_read(s->rx_desc_curr, &desc, sizeof(desc)); + dma_memory_read(&s->dma_as, s->rx_desc_curr, &desc, sizeof(desc)); value = desc.addr; } else { value = 0; @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_realize(DeviceState *dev, Error **errp) { AwSun8iEmacState *s = AW_SUN8I_EMAC(dev); + if (!s->dma_mr) { + error_setg(errp, TYPE_AW_SUN8I_EMAC " 'dma-memory' link not set"); + return; + } + + address_space_init(&s->dma_as, s->dma_mr, "emac-dma"); + qemu_macaddr_default_if_unset(&s->conf.macaddr); s->nic = qemu_new_nic(&net_allwinner_sun8i_emac_info, &s->conf, object_get_typename(OBJECT(dev)), dev->id, s); @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_realize(DeviceState *dev, Error **errp) static Property allwinner_sun8i_emac_properties[] = { DEFINE_NIC_PROPERTIES(AwSun8iEmacState, conf), DEFINE_PROP_UINT8("phy-addr", AwSun8iEmacState, mii_phy_addr, 0), + DEFINE_PROP_LINK("dma-memory", AwSun8iEmacState, dma_mr, + TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As we want to call qdev_connect_clock_in() before the device is realized, we need to uninline cadence_uart_create() first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/cadence_uart.h | 17 ----------------- hw/arm/xilinx_zynq.c | 14 ++++++++++++-- 2 files changed, 12 insertions(+), 19 deletions(-) diff --git a/include/hw/char/cadence_uart.h b/include/hw/char/cadence_uart.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/cadence_uart.h +++ b/include/hw/char/cadence_uart.h @@ -XXX,XX +XXX,XX @@ typedef struct { Clock *refclk; } CadenceUARTState; -static inline DeviceState *cadence_uart_create(hwaddr addr, - qemu_irq irq, - Chardev *chr) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CADENCE_UART); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_chr(dev, "chardev", chr); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, irq); - - return dev; -} - #endif diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]); sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]); - dev = cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0)); + dev = qdev_new(TYPE_CADENCE_UART); + busdev = SYS_BUS_DEVICE(dev); + qdev_prop_set_chr(dev, "chardev", serial_hd(0)); + sysbus_realize_and_unref(busdev, &error_fatal); + sysbus_mmio_map(busdev, 0, 0xE0000000); + sysbus_connect_irq(busdev, 0, pic[59 - IRQ_OFFSET]); qdev_connect_clock_in(dev, "refclk", qdev_get_clock_out(slcr, "uart0_ref_clk")); - dev = cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1)); + dev = qdev_new(TYPE_CADENCE_UART); + busdev = SYS_BUS_DEVICE(dev); + qdev_prop_set_chr(dev, "chardev", serial_hd(1)); + sysbus_realize_and_unref(busdev, &error_fatal); + sysbus_mmio_map(busdev, 0, 0xE0001000); + sysbus_connect_irq(busdev, 0, pic[82 - IRQ_OFFSET]); qdev_connect_clock_in(dev, "refclk", qdev_get_clock_out(slcr, "uart1_ref_clk")); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Clock canonical name is set in device_set_realized (see the block added to hw/core/qdev.c in commit 0e6934f264). If we connect a clock after the device is realized, this code is not executed. This is currently not a problem as this name is only used for trace events, however this disrupt tracing. Fix by calling qdev_connect_clock_in() before realizing. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) 1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa, 0); - /* Create slcr, keep a pointer to connect clocks */ - slcr = qdev_new("xilinx,zynq_slcr"); - sysbus_realize_and_unref(SYS_BUS_DEVICE(slcr), &error_fatal); - sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000); - /* Create the main clock source, and feed slcr with it */ zynq_machine->ps_clk = CLOCK(object_new(TYPE_CLOCK)); object_property_add_child(OBJECT(zynq_machine), "ps_clk", OBJECT(zynq_machine->ps_clk)); object_unref(OBJECT(zynq_machine->ps_clk)); clock_set_hz(zynq_machine->ps_clk, PS_CLK_FREQUENCY); + + /* Create slcr, keep a pointer to connect clocks */ + slcr = qdev_new("xilinx,zynq_slcr"); qdev_connect_clock_in(slcr, "ps_clk", zynq_machine->ps_clk); + sysbus_realize_and_unref(SYS_BUS_DEVICE(slcr), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000); dev = qdev_new(TYPE_A9MPCORE_PRIV); qdev_prop_set_uint32(dev, "num-cpu", 1); @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) dev = qdev_new(TYPE_CADENCE_UART); busdev = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(0)); + qdev_connect_clock_in(dev, "refclk", + qdev_get_clock_out(slcr, "uart0_ref_clk")); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0xE0000000); sysbus_connect_irq(busdev, 0, pic[59 - IRQ_OFFSET]); - qdev_connect_clock_in(dev, "refclk", - qdev_get_clock_out(slcr, "uart0_ref_clk")); dev = qdev_new(TYPE_CADENCE_UART); busdev = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(1)); + qdev_connect_clock_in(dev, "refclk", + qdev_get_clock_out(slcr, "uart1_ref_clk")); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0xE0001000); sysbus_connect_irq(busdev, 0, pic[82 - IRQ_OFFSET]); - qdev_connect_clock_in(dev, "refclk", - qdev_get_clock_out(slcr, "uart1_ref_clk")); sysbus_create_varargs("cadence_ttc", 0xF8001000, pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> We want to assert the device is not realized. To avoid overloading this header including "hw/qdev-core.h", uninline the function first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-clock.h | 6 +----- hw/core/qdev-clock.c | 5 +++++ 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/hw/qdev-clock.h b/include/hw/qdev-clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-clock.h +++ b/include/hw/qdev-clock.h @@ -XXX,XX +XXX,XX @@ Clock *qdev_get_clock_out(DeviceState *dev, const char *name); * Set the source clock of input clock @name of device @dev to @source. * @source period update will be propagated to @name clock. */ -static inline void qdev_connect_clock_in(DeviceState *dev, const char *name, - Clock *source) -{ - clock_set_source(qdev_get_clock_in(dev, name), source); -} +void qdev_connect_clock_in(DeviceState *dev, const char *name, Clock *source); /** * qdev_alias_clock: diff --git a/hw/core/qdev-clock.c b/hw/core/qdev-clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev-clock.c +++ b/hw/core/qdev-clock.c @@ -XXX,XX +XXX,XX @@ Clock *qdev_alias_clock(DeviceState *dev, const char *name, return ncl->clock; } + +void qdev_connect_clock_in(DeviceState *dev, const char *name, Clock *source) +{ + clock_set_source(qdev_get_clock_in(dev, name), source); +} -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Clock canonical name is set in device_set_realized (see the block added to hw/core/qdev.c in commit 0e6934f264). If we connect a clock after the device is realized, this code is not executed. This is currently not a problem as this name is only used for trace events, however this disrupt tracing. Add a comment to document qdev_connect_clock_in() must be called before the device is realized, and assert this condition. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-clock.h | 2 ++ hw/core/qdev-clock.c | 1 + 2 files changed, 3 insertions(+) diff --git a/include/hw/qdev-clock.h b/include/hw/qdev-clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-clock.h +++ b/include/hw/qdev-clock.h @@ -XXX,XX +XXX,XX @@ Clock *qdev_get_clock_out(DeviceState *dev, const char *name); * * Set the source clock of input clock @name of device @dev to @source. * @source period update will be propagated to @name clock. + * + * Must be called before @dev is realized. */ void qdev_connect_clock_in(DeviceState *dev, const char *name, Clock *source); diff --git a/hw/core/qdev-clock.c b/hw/core/qdev-clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev-clock.c +++ b/hw/core/qdev-clock.c @@ -XXX,XX +XXX,XX @@ Clock *qdev_alias_clock(DeviceState *dev, const char *name, void qdev_connect_clock_in(DeviceState *dev, const char *name, Clock *source) { + assert(!dev->realized); clock_set_source(qdev_get_clock_in(dev, name), source); } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To better align the read/write accesses, display the value after the offset (read accesses only display the offset). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/unimp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) { UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); - qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " "(size %d, offset 0x%" HWADDR_PRIx ")\n", s->name, size, offset); return 0; @@ -XXX,XX +XXX,XX @@ static void unimp_write(void *opaque, hwaddr offset, UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " - "(size %d, value 0x%" PRIx64 - ", offset 0x%" HWADDR_PRIx ")\n", - s->name, size, value, offset); + "(size %d, offset 0x%" HWADDR_PRIx + ", value 0x%" PRIx64 ")\n", + s->name, size, offset, value); } static const MemoryRegionOps unimp_ops = { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To quickly notice the access size, display the value with the width of the access (i.e. 16-bit access is displayed 0x0000, while 8-bit access 0x00). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/unimp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ static void unimp_write(void *opaque, hwaddr offset, qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " "(size %d, offset 0x%" HWADDR_PRIx - ", value 0x%" PRIx64 ")\n", - s->name, size, offset, value); + ", value 0x%0*" PRIx64 ")\n", + s->name, size, offset, size << 1, value); } static const MemoryRegionOps unimp_ops = { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To have a better idea of how big is the region where the offset belongs, display the value with the width of the region size (i.e. a region of 0x1000 bytes uses 0x000 format). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/unimp.h | 1 + hw/misc/unimp.c | 10 ++++++---- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/include/hw/misc/unimp.h b/include/hw/misc/unimp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/unimp.h +++ b/include/hw/misc/unimp.h @@ -XXX,XX +XXX,XX @@ typedef struct { SysBusDevice parent_obj; MemoryRegion iomem; + unsigned offset_fmt_width; char *name; uint64_t size; } UnimplementedDeviceState; diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " - "(size %d, offset 0x%" HWADDR_PRIx ")\n", - s->name, size, offset); + "(size %d, offset 0x%0*" HWADDR_PRIx ")\n", + s->name, size, s->offset_fmt_width, offset); return 0; } @@ -XXX,XX +XXX,XX @@ static void unimp_write(void *opaque, hwaddr offset, UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " - "(size %d, offset 0x%" HWADDR_PRIx + "(size %d, offset 0x%0*" HWADDR_PRIx ", value 0x%0*" PRIx64 ")\n", - s->name, size, offset, size << 1, value); + s->name, size, s->offset_fmt_width, offset, size << 1, value); } static const MemoryRegionOps unimp_ops = { @@ -XXX,XX +XXX,XX @@ static void unimp_realize(DeviceState *dev, Error **errp) return; } + s->offset_fmt_width = DIV_ROUND_UP(64 - clz64(s->size - 1), 4); + memory_region_init_io(&s->iomem, OBJECT(s), &unimp_ops, s, s->name, s->size); sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); -- 2.20.1 From: Eduardo Habkost <ehabkost@redhat.com> TYPE_ARM_SSE is a TYPE_SYS_BUS_DEVICE subclass, but ARMSSEClass::parent_class is declared as DeviceClass. It never caused any problems by pure luck: We were not setting class_size for TYPE_ARM_SSE, so class_size of TYPE_SYS_BUS_DEVICE was being used (sizeof(SysBusDeviceClass)). This made the system allocate enough memory for TYPE_ARM_SSE devices even though ARMSSEClass was too small for a sysbus device. Additionally, the ARMSSEClass::info field ended up at the same offset as SysBusDeviceClass::explicit_ofw_unit_address. This would make sysbus_get_fw_dev_path() crash for the device. Luckily, sysbus_get_fw_dev_path() never gets called for TYPE_ARM_SSE devices, because qdev_get_fw_dev_path() is only used by the boot device code, and TYPE_ARM_SSE devices don't appear at the fw_boot_order list. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20200826181006.4097163-1-ehabkost@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { typedef struct ARMSSEInfo ARMSSEInfo; typedef struct ARMSSEClass { - DeviceClass parent_class; + SysBusDeviceClass parent_class; const ARMSSEInfo *info; } ARMSSEClass; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo armsse_info = { .name = TYPE_ARMSSE, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(ARMSSE), + .class_size = sizeof(ARMSSEClass), .instance_init = armsse_init, .abstract = true, .interfaces = (InterfaceInfo[]) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Add left-shift to match the existing right-shift. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/qemu/int128.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/qemu/int128.h b/include/qemu/int128.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/int128.h +++ b/include/qemu/int128.h @@ -XXX,XX +XXX,XX @@ static inline Int128 int128_rshift(Int128 a, int n) return a >> n; } +static inline Int128 int128_lshift(Int128 a, int n) +{ + return a << n; +} + static inline Int128 int128_add(Int128 a, Int128 b) { return a + b; @@ -XXX,XX +XXX,XX @@ static inline Int128 int128_rshift(Int128 a, int n) } } +static inline Int128 int128_lshift(Int128 a, int n) +{ + uint64_t l = a.lo << (n & 63); + if (n >= 64) { + return int128_make128(0, l); + } else if (n > 0) { + return int128_make128(l, (a.hi << n) | (a.lo >> (64 - n))); + } + return a; +} + static inline Int128 int128_add(Int128 a, Int128 b) { uint64_t lo = a.lo + b.lo; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model the new function on gen_gvec_fn2 in translate-a64.c, but indicating which kind of register and in which order. Since there is only one user of do_vector2_z, fold it into do_mov_z. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) } /* Invoke a vector expander on two Zregs. */ -static bool do_vector2_z(DisasContext *s, GVecGen2Fn *gvec_fn, - int esz, int rd, int rn) + +static void gen_gvec_fn_zz(DisasContext *s, GVecGen2Fn *gvec_fn, + int esz, int rd, int rn) { - if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - gvec_fn(esz, vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), vsz, vsz); - } - return true; + unsigned vsz = vec_full_reg_size(s); + gvec_fn(esz, vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), vsz, vsz); } /* Invoke a vector expander on three Zregs. */ @@ -XXX,XX +XXX,XX @@ static bool do_vector3_z(DisasContext *s, GVecGen3Fn *gvec_fn, /* Invoke a vector move on two Zregs. */ static bool do_mov_z(DisasContext *s, int rd, int rn) { - return do_vector2_z(s, tcg_gen_gvec_mov, 0, rd, rn); + if (sve_access_check(s)) { + gen_gvec_fn_zz(s, tcg_gen_gvec_mov, MO_8, rd, rn); + } + return true; } /* Initialize a Zreg with replications of a 64-bit immediate. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model gen_gvec_fn_zzz on gen_gvec_fn3 in translate-a64.c, but indicating which kind of register and in which order. Model do_zzz_fn on the other do_foo functions that take an argument set and verify sve enabled. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 43 +++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_fn_zz(DisasContext *s, GVecGen2Fn *gvec_fn, } /* Invoke a vector expander on three Zregs. */ -static bool do_vector3_z(DisasContext *s, GVecGen3Fn *gvec_fn, - int esz, int rd, int rn, int rm) +static void gen_gvec_fn_zzz(DisasContext *s, GVecGen3Fn *gvec_fn, + int esz, int rd, int rn, int rm) { - if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - gvec_fn(esz, vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - vec_full_reg_offset(s, rm), vsz, vsz); - } - return true; + unsigned vsz = vec_full_reg_size(s); + gvec_fn(esz, vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), vsz, vsz); } /* Invoke a vector move on two Zregs. */ @@ -XXX,XX +XXX,XX @@ const uint64_t pred_esz_masks[4] = { *** SVE Logical - Unpredicated Group */ +static bool do_zzz_fn(DisasContext *s, arg_rrr_esz *a, GVecGen3Fn *gvec_fn) +{ + if (sve_access_check(s)) { + gen_gvec_fn_zzz(s, gvec_fn, a->esz, a->rd, a->rn, a->rm); + } + return true; +} + static bool trans_AND_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_and, 0, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_and); } static bool trans_ORR_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_or, 0, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_or); } static bool trans_EOR_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_xor, 0, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_xor); } static bool trans_BIC_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_andc, 0, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_andc); } /* @@ -XXX,XX +XXX,XX @@ static bool trans_BIC_zzz(DisasContext *s, arg_rrr_esz *a) static bool trans_ADD_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_add, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_add); } static bool trans_SUB_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_sub, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_sub); } static bool trans_SQADD_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_ssadd, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_ssadd); } static bool trans_SQSUB_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_sssub, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_sssub); } static bool trans_UQADD_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_usadd, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_usadd); } static bool trans_UQSUB_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_ussub, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_ussub); } /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We want to ensure that access is checked by the time we ask for a specific fp/vector register. We want to ensure that we do not emit two lots of code to raise an exception. But sometimes it's difficult to cleanly organize the code such that we never pass through sve_check_access exactly once. Allow multiple calls so long as the result is true, that is, no exception to be raised. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 1 + target/arm/translate-a64.c | 27 ++++++++++++++++----------- 2 files changed, 17 insertions(+), 11 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { * that it is set at the point where we actually touch the FP regs. */ bool fp_access_checked; + bool sve_access_checked; /* ARMv8 single-step state (this is distinct from the QEMU gdbstub * single-step support). */ diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void do_vec_ld(DisasContext *s, int destidx, int element, * unallocated-encoding checks (otherwise the syndrome information * for the resulting exception will be incorrect). */ -static inline bool fp_access_check(DisasContext *s) +static bool fp_access_check(DisasContext *s) { - assert(!s->fp_access_checked); - s->fp_access_checked = true; + if (s->fp_excp_el) { + assert(!s->fp_access_checked); + s->fp_access_checked = true; - if (!s->fp_excp_el) { - return true; + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return false; } - - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); - return false; + s->fp_access_checked = true; + return true; } /* Check that SVE access is enabled. If it is, return true. @@ -XXX,XX +XXX,XX @@ static inline bool fp_access_check(DisasContext *s) bool sve_access_check(DisasContext *s) { if (s->sve_excp_el) { - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn_sve_access_trap(), - s->sve_excp_el); + assert(!s->sve_access_checked); + s->sve_access_checked = true; + + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_sve_access_trap(), s->sve_excp_el); return false; } + s->sve_access_checked = true; return fp_access_check(s); } @@ -XXX,XX +XXX,XX @@ static void disas_a64_insn(CPUARMState *env, DisasContext *s) s->base.pc_next += 4; s->fp_access_checked = false; + s->sve_access_checked = false; if (dc_isar_feature(aa64_bti, s)) { if (s->base.num_insns == 1) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the only user of the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_dupi_z(DisasContext *s, int rd, uint64_t word) tcg_gen_gvec_dup_imm(MO_64, vec_full_reg_offset(s, rd), vsz, vsz, word); } -/* Invoke a vector expander on two Pregs. */ -static bool do_vector2_p(DisasContext *s, GVecGen2Fn *gvec_fn, - int esz, int rd, int rn) -{ - if (sve_access_check(s)) { - unsigned psz = pred_gvec_reg_size(s); - gvec_fn(esz, pred_full_reg_offset(s, rd), - pred_full_reg_offset(s, rn), psz, psz); - } - return true; -} - /* Invoke a vector expander on three Pregs. */ static bool do_vector3_p(DisasContext *s, GVecGen3Fn *gvec_fn, int esz, int rd, int rn, int rm) @@ -XXX,XX +XXX,XX @@ static bool do_vecop4_p(DisasContext *s, const GVecGen4 *gvec_op, /* Invoke a vector move on two Pregs. */ static bool do_mov_p(DisasContext *s, int rd, int rn) { - return do_vector2_p(s, tcg_gen_gvec_mov, 0, rd, rn); + if (sve_access_check(s)) { + unsigned psz = pred_gvec_reg_size(s); + tcg_gen_gvec_mov(MO_8, pred_full_reg_offset(s, rd), + pred_full_reg_offset(s, rn), psz, psz); + } + return true; } /* Set the cpu flags as per a return from an SVE helper. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Move the check for !S into do_pppp_flags, which allows to merge in do_vecop4_p. Split out gen_gvec_fn_ppp without sve_access_check, to mirror gen_gvec_fn_zzz. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 111 ++++++++++++++----------------------- 1 file changed, 43 insertions(+), 68 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_dupi_z(DisasContext *s, int rd, uint64_t word) } /* Invoke a vector expander on three Pregs. */ -static bool do_vector3_p(DisasContext *s, GVecGen3Fn *gvec_fn, - int esz, int rd, int rn, int rm) +static void gen_gvec_fn_ppp(DisasContext *s, GVecGen3Fn *gvec_fn, + int rd, int rn, int rm) { - if (sve_access_check(s)) { - unsigned psz = pred_gvec_reg_size(s); - gvec_fn(esz, pred_full_reg_offset(s, rd), - pred_full_reg_offset(s, rn), - pred_full_reg_offset(s, rm), psz, psz); - } - return true; -} - -/* Invoke a vector operation on four Pregs. */ -static bool do_vecop4_p(DisasContext *s, const GVecGen4 *gvec_op, - int rd, int rn, int rm, int rg) -{ - if (sve_access_check(s)) { - unsigned psz = pred_gvec_reg_size(s); - tcg_gen_gvec_4(pred_full_reg_offset(s, rd), - pred_full_reg_offset(s, rn), - pred_full_reg_offset(s, rm), - pred_full_reg_offset(s, rg), - psz, psz, gvec_op); - } - return true; + unsigned psz = pred_gvec_reg_size(s); + gvec_fn(MO_64, pred_full_reg_offset(s, rd), + pred_full_reg_offset(s, rn), + pred_full_reg_offset(s, rm), psz, psz); } /* Invoke a vector move on two Pregs. */ @@ -XXX,XX +XXX,XX @@ static bool do_pppp_flags(DisasContext *s, arg_rprr_s *a, int mofs = pred_full_reg_offset(s, a->rm); int gofs = pred_full_reg_offset(s, a->pg); + if (!a->s) { + tcg_gen_gvec_4(dofs, nofs, mofs, gofs, psz, psz, gvec_op); + return true; + } + if (psz == 8) { /* Do the operation and the flags generation in temps. */ TCGv_i64 pd = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static bool trans_AND_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_and_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else if (a->rn == a->rm) { - if (a->pg == a->rn) { - return do_mov_p(s, a->rd, a->rn); - } else { - return do_vector3_p(s, tcg_gen_gvec_and, 0, a->rd, a->rn, a->pg); + + if (!a->s) { + if (!sve_access_check(s)) { + return true; + } + if (a->rn == a->rm) { + if (a->pg == a->rn) { + do_mov_p(s, a->rd, a->rn); + } else { + gen_gvec_fn_ppp(s, tcg_gen_gvec_and, a->rd, a->rn, a->pg); + } + return true; + } else if (a->pg == a->rn || a->pg == a->rm) { + gen_gvec_fn_ppp(s, tcg_gen_gvec_and, a->rd, a->rn, a->rm); + return true; } - } else if (a->pg == a->rn || a->pg == a->rm) { - return do_vector3_p(s, tcg_gen_gvec_and, 0, a->rd, a->rn, a->rm); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); } + return do_pppp_flags(s, a, &op); } static void gen_bic_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_BIC_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_bic_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else if (a->pg == a->rn) { - return do_vector3_p(s, tcg_gen_gvec_andc, 0, a->rd, a->rn, a->rm); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); + + if (!a->s && a->pg == a->rn) { + if (sve_access_check(s)) { + gen_gvec_fn_ppp(s, tcg_gen_gvec_andc, a->rd, a->rn, a->rm); + } + return true; } + return do_pppp_flags(s, a, &op); } static void gen_eor_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_EOR_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_eor_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); - } + return do_pppp_flags(s, a, &op); } static void gen_sel_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_SEL_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_sel_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; + if (a->s) { return false; - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); } + return do_pppp_flags(s, a, &op); } static void gen_orr_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_ORR_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_orr_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else if (a->pg == a->rn && a->rn == a->rm) { + + if (!a->s && a->pg == a->rn && a->rn == a->rm) { return do_mov_p(s, a->rd, a->rn); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); } + return do_pppp_flags(s, a, &op); } static void gen_orn_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_ORN_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_orn_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); - } + return do_pppp_flags(s, a, &op); } static void gen_nor_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_NOR_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_nor_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); - } + return do_pppp_flags(s, a, &op); } static void gen_nand_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_NAND_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_nand_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); - } + return do_pppp_flags(s, a, &op); } /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The gvec operation was added after the initial implementation of the SEL instruction and was missed in the conversion. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 31 ++++++++----------------------- 1 file changed, 8 insertions(+), 23 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_EOR_pppp(DisasContext *s, arg_rprr_s *a) return do_pppp_flags(s, a, &op); } -static void gen_sel_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) -{ - tcg_gen_and_i64(pn, pn, pg); - tcg_gen_andc_i64(pm, pm, pg); - tcg_gen_or_i64(pd, pn, pm); -} - -static void gen_sel_pg_vec(unsigned vece, TCGv_vec pd, TCGv_vec pn, - TCGv_vec pm, TCGv_vec pg) -{ - tcg_gen_and_vec(vece, pn, pn, pg); - tcg_gen_andc_vec(vece, pm, pm, pg); - tcg_gen_or_vec(vece, pd, pn, pm); -} - static bool trans_SEL_pppp(DisasContext *s, arg_rprr_s *a) { - static const GVecGen4 op = { - .fni8 = gen_sel_pg_i64, - .fniv = gen_sel_pg_vec, - .fno = gen_helper_sve_sel_pppp, - .prefer_i64 = TCG_TARGET_REG_BITS == 64, - }; - if (a->s) { return false; } - return do_pppp_flags(s, a, &op); + if (sve_access_check(s)) { + unsigned psz = pred_gvec_reg_size(s); + tcg_gen_gvec_bitsel(MO_8, pred_full_reg_offset(s, a->rd), + pred_full_reg_offset(s, a->pg), + pred_full_reg_offset(s, a->rn), + pred_full_reg_offset(s, a->rm), psz, psz); + } + return true; } static void gen_orr_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model after gen_gvec_fn_zzz et al. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } -/* Invoke a vector expander on two Zregs. */ +/* Invoke an out-of-line helper on 3 Zregs and a predicate. */ +static void gen_gvec_ool_zzzp(DisasContext *s, gen_helper_gvec_4 *fn, + int rd, int rn, int rm, int pg, int data) +{ + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + pred_full_reg_offset(s, pg), + vsz, vsz, data, fn); +} +/* Invoke a vector expander on two Zregs. */ static void gen_gvec_fn_zz(DisasContext *s, GVecGen2Fn *gvec_fn, int esz, int rd, int rn) { @@ -XXX,XX +XXX,XX @@ static bool trans_UQSUB_zzz(DisasContext *s, arg_rrr_esz *a) static bool do_zpzz_ool(DisasContext *s, arg_rprr_esz *a, gen_helper_gvec_4 *fn) { - unsigned vsz = vec_full_reg_size(s); if (fn == NULL) { return false; } if (sve_access_check(s)) { - tcg_gen_gvec_4_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - pred_full_reg_offset(s, a->pg), - vsz, vsz, 0, fn); + gen_gvec_ool_zzzp(s, fn, a->rd, a->rn, a->rm, a->pg, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static void do_sel_z(DisasContext *s, int rd, int rn, int rm, int pg, int esz) gen_helper_sve_sel_zpzz_b, gen_helper_sve_sel_zpzz_h, gen_helper_sve_sel_zpzz_s, gen_helper_sve_sel_zpzz_d }; - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - vec_full_reg_offset(s, rm), - pred_full_reg_offset(s, pg), - vsz, vsz, 0, fns[esz]); + gen_gvec_ool_zzzp(s, fns[esz], rd, rn, rm, pg, 0); } #define DO_ZPZZ(NAME, name) \ @@ -XXX,XX +XXX,XX @@ static bool trans_RBIT(DisasContext *s, arg_rpr_esz *a) static bool trans_SPLICE(DisasContext *s, arg_rprr_esz *a) { if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_4_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - pred_full_reg_offset(s, a->pg), - vsz, vsz, a->esz, gen_helper_sve_splice); + gen_gvec_ool_zzzp(s, gen_helper_sve_splice, + a->rd, a->rn, a->rm, a->pg, 0); } return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The existing clr functions have only one vector argument, and so can only clear in place. The existing movz functions have two vector arguments, and so can clear while moving. Merge them, with a flag that controls the sense of active vs inactive elements being cleared. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 5 --- target/arm/sve_helper.c | 70 ++++++++------------------------------ target/arm/translate-sve.c | 53 +++++++++++------------------ 3 files changed, 34 insertions(+), 94 deletions(-) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sve_uminv_h, TCG_CALL_NO_RWG, i64, ptr, ptr, i32) DEF_HELPER_FLAGS_3(sve_uminv_s, TCG_CALL_NO_RWG, i64, ptr, ptr, i32) DEF_HELPER_FLAGS_3(sve_uminv_d, TCG_CALL_NO_RWG, i64, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(sve_clr_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(sve_clr_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(sve_clr_s, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(sve_clr_d, TCG_CALL_NO_RWG, void, ptr, ptr, i32) - DEF_HELPER_FLAGS_4(sve_movz_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_movz_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_movz_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_pnext)(void *vd, void *vg, uint32_t pred_desc) return flags; } -/* Store zero into every active element of Zd. We will use this for two - * and three-operand predicated instructions for which logic dictates a - * zero result. In particular, logical shift by element size, which is - * otherwise undefined on the host. - * - * For element sizes smaller than uint64_t, we use tables to expand - * the N bits of the controlling predicate to a byte mask, and clear - * those bytes. +/* + * Copy Zn into Zd, and store zero into inactive elements. + * If inv, store zeros into the active elements. */ -void HELPER(sve_clr_b)(void *vd, void *vg, uint32_t desc) -{ - intptr_t i, opr_sz = simd_oprsz(desc) / 8; - uint64_t *d = vd; - uint8_t *pg = vg; - for (i = 0; i < opr_sz; i += 1) { - d[i] &= ~expand_pred_b(pg[H1(i)]); - } -} - -void HELPER(sve_clr_h)(void *vd, void *vg, uint32_t desc) -{ - intptr_t i, opr_sz = simd_oprsz(desc) / 8; - uint64_t *d = vd; - uint8_t *pg = vg; - for (i = 0; i < opr_sz; i += 1) { - d[i] &= ~expand_pred_h(pg[H1(i)]); - } -} - -void HELPER(sve_clr_s)(void *vd, void *vg, uint32_t desc) -{ - intptr_t i, opr_sz = simd_oprsz(desc) / 8; - uint64_t *d = vd; - uint8_t *pg = vg; - for (i = 0; i < opr_sz; i += 1) { - d[i] &= ~expand_pred_s(pg[H1(i)]); - } -} - -void HELPER(sve_clr_d)(void *vd, void *vg, uint32_t desc) -{ - intptr_t i, opr_sz = simd_oprsz(desc) / 8; - uint64_t *d = vd; - uint8_t *pg = vg; - for (i = 0; i < opr_sz; i += 1) { - if (pg[H1(i)] & 1) { - d[i] = 0; - } - } -} - -/* Copy Zn into Zd, and store zero into inactive elements. */ void HELPER(sve_movz_b)(void *vd, void *vn, void *vg, uint32_t desc) { intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t inv = -(uint64_t)(simd_data(desc) & 1); uint64_t *d = vd, *n = vn; uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { - d[i] = n[i] & expand_pred_b(pg[H1(i)]); + d[i] = n[i] & (expand_pred_b(pg[H1(i)]) ^ inv); } } void HELPER(sve_movz_h)(void *vd, void *vn, void *vg, uint32_t desc) { intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t inv = -(uint64_t)(simd_data(desc) & 1); uint64_t *d = vd, *n = vn; uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { - d[i] = n[i] & expand_pred_h(pg[H1(i)]); + d[i] = n[i] & (expand_pred_h(pg[H1(i)]) ^ inv); } } void HELPER(sve_movz_s)(void *vd, void *vn, void *vg, uint32_t desc) { intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t inv = -(uint64_t)(simd_data(desc) & 1); uint64_t *d = vd, *n = vn; uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { - d[i] = n[i] & expand_pred_s(pg[H1(i)]); + d[i] = n[i] & (expand_pred_s(pg[H1(i)]) ^ inv); } } @@ -XXX,XX +XXX,XX @@ void HELPER(sve_movz_d)(void *vd, void *vn, void *vg, uint32_t desc) intptr_t i, opr_sz = simd_oprsz(desc) / 8; uint64_t *d = vd, *n = vn; uint8_t *pg = vg; + uint8_t inv = simd_data(desc); + for (i = 0; i < opr_sz; i += 1) { - d[i] = n[i] & -(uint64_t)(pg[H1(i)] & 1); + d[i] = n[i] & -(uint64_t)((pg[H1(i)] ^ inv) & 1); } } diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_SADDV(DisasContext *s, arg_rpr_esz *a) *** SVE Shift by Immediate - Predicated Group */ -/* Store zero into every active element of Zd. We will use this for two - * and three-operand predicated instructions for which logic dictates a - * zero result. +/* + * Copy Zn into Zd, storing zeros into inactive elements. + * If invert, store zeros into the active elements. */ -static bool do_clr_zp(DisasContext *s, int rd, int pg, int esz) -{ - static gen_helper_gvec_2 * const fns[4] = { - gen_helper_sve_clr_b, gen_helper_sve_clr_h, - gen_helper_sve_clr_s, gen_helper_sve_clr_d, - }; - if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_2_ool(vec_full_reg_offset(s, rd), - pred_full_reg_offset(s, pg), - vsz, vsz, 0, fns[esz]); - } - return true; -} - -/* Copy Zn into Zd, storing zeros into inactive elements. */ -static void do_movz_zpz(DisasContext *s, int rd, int rn, int pg, int esz) +static bool do_movz_zpz(DisasContext *s, int rd, int rn, int pg, + int esz, bool invert) { static gen_helper_gvec_3 * const fns[4] = { gen_helper_sve_movz_b, gen_helper_sve_movz_h, gen_helper_sve_movz_s, gen_helper_sve_movz_d, }; - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - pred_full_reg_offset(s, pg), - vsz, vsz, 0, fns[esz]); + + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + pred_full_reg_offset(s, pg), + vsz, vsz, invert, fns[esz]); + } + return true; } static bool do_zpzi_ool(DisasContext *s, arg_rpri_esz *a, @@ -XXX,XX +XXX,XX @@ static bool trans_LSR_zpzi(DisasContext *s, arg_rpri_esz *a) /* Shift by element size is architecturally valid. For logical shifts, it is a zeroing operation. */ if (a->imm >= (8 << a->esz)) { - return do_clr_zp(s, a->rd, a->pg, a->esz); + return do_movz_zpz(s, a->rd, a->rd, a->pg, a->esz, true); } else { return do_zpzi_ool(s, a, fns[a->esz]); } @@ -XXX,XX +XXX,XX @@ static bool trans_LSL_zpzi(DisasContext *s, arg_rpri_esz *a) /* Shift by element size is architecturally valid. For logical shifts, it is a zeroing operation. */ if (a->imm >= (8 << a->esz)) { - return do_clr_zp(s, a->rd, a->pg, a->esz); + return do_movz_zpz(s, a->rd, a->rd, a->pg, a->esz, true); } else { return do_zpzi_ool(s, a, fns[a->esz]); } @@ -XXX,XX +XXX,XX @@ static bool trans_ASRD(DisasContext *s, arg_rpri_esz *a) /* Shift by element size is architecturally valid. For arithmetic right shift for division, it is a zeroing operation. */ if (a->imm >= (8 << a->esz)) { - return do_clr_zp(s, a->rd, a->pg, a->esz); + return do_movz_zpz(s, a->rd, a->rd, a->pg, a->esz, true); } else { return do_zpzi_ool(s, a, fns[a->esz]); } @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a) /* Zero the inactive elements. */ gen_set_label(over); - do_movz_zpz(s, a->rd, a->rd, a->pg, esz); - return true; + return do_movz_zpz(s, a->rd, a->rd, a->pg, esz, false); } static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, @@ -XXX,XX +XXX,XX @@ static bool trans_MOVPRFX_m(DisasContext *s, arg_rpr_esz *a) static bool trans_MOVPRFX_z(DisasContext *s, arg_rpr_esz *a) { - if (sve_access_check(s)) { - do_movz_zpz(s, a->rd, a->rn, a->pg, a->esz); - } - return true; + return do_movz_zpz(s, a->rd, a->rn, a->pg, a->esz, false); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model after gen_gvec_fn_zzz et al. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } +/* Invoke an out-of-line helper on 2 Zregs and a predicate. */ +static void gen_gvec_ool_zzp(DisasContext *s, gen_helper_gvec_3 *fn, + int rd, int rn, int pg, int data) +{ + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + pred_full_reg_offset(s, pg), + vsz, vsz, data, fn); +} + /* Invoke an out-of-line helper on 3 Zregs and a predicate. */ static void gen_gvec_ool_zzzp(DisasContext *s, gen_helper_gvec_4 *fn, int rd, int rn, int rm, int pg, int data) @@ -XXX,XX +XXX,XX @@ static bool do_zpz_ool(DisasContext *s, arg_rpr_esz *a, gen_helper_gvec_3 *fn) return false; } if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - pred_full_reg_offset(s, a->pg), - vsz, vsz, 0, fn); + gen_gvec_ool_zzp(s, fn, a->rd, a->rn, a->pg, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool do_movz_zpz(DisasContext *s, int rd, int rn, int pg, }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - pred_full_reg_offset(s, pg), - vsz, vsz, invert, fns[esz]); + gen_gvec_ool_zzp(s, fns[esz], rd, rn, pg, invert); } return true; } @@ -XXX,XX +XXX,XX @@ static bool do_zpzi_ool(DisasContext *s, arg_rpri_esz *a, gen_helper_gvec_3 *fn) { if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - pred_full_reg_offset(s, a->pg), - vsz, vsz, a->imm, fn); + gen_gvec_ool_zzp(s, fn, a->rd, a->rn, a->pg, a->imm); } return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 53 +++++++++++++------------------------- 1 file changed, 18 insertions(+), 35 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } +/* Invoke an out-of-line helper on 3 Zregs. */ +static void gen_gvec_ool_zzz(DisasContext *s, gen_helper_gvec_3 *fn, + int rd, int rn, int rm, int data) +{ + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + vsz, vsz, data, fn); +} + /* Invoke an out-of-line helper on 2 Zregs and a predicate. */ static void gen_gvec_ool_zzp(DisasContext *s, gen_helper_gvec_3 *fn, int rd, int rn, int pg, int data) @@ -XXX,XX +XXX,XX @@ static bool do_zzw_ool(DisasContext *s, arg_rrr_esz *a, gen_helper_gvec_3 *fn) return false; } if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, 0, fn); + gen_gvec_ool_zzz(s, fn, a->rd, a->rn, a->rm, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_RDVL(DisasContext *s, arg_RDVL *a) static bool do_adr(DisasContext *s, arg_rrri *a, gen_helper_gvec_3 *fn) { if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, a->imm, fn); + gen_gvec_ool_zzz(s, fn, a->rd, a->rn, a->rm, a->imm); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_FTSSEL(DisasContext *s, arg_rrr_esz *a) return false; } if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, 0, fns[a->esz]); + gen_gvec_ool_zzz(s, fns[a->esz], a->rd, a->rn, a->rm, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_TBL(DisasContext *s, arg_rrr_esz *a) }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, 0, fns[a->esz]); + gen_gvec_ool_zzz(s, fns[a->esz], a->rd, a->rn, a->rm, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool do_zzz_data_ool(DisasContext *s, arg_rrr_esz *a, int data, gen_helper_gvec_3 *fn) { if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, data, fn); + gen_gvec_ool_zzz(s, fn, a->rd, a->rn, a->rm, data); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_DOT_zzz(DisasContext *s, arg_DOT_zzz *a) }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, 0, fns[a->u][a->sz]); + gen_gvec_ool_zzz(s, fns[a->u][a->sz], a->rd, a->rn, a->rm, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_DOT_zzx(DisasContext *s, arg_DOT_zzx *a) }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, a->index, fns[a->u][a->sz]); + gen_gvec_ool_zzz(s, fns[a->u][a->sz], a->rd, a->rn, a->rm, a->index); } return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } +/* Invoke an out-of-line helper on 2 Zregs. */ +static void gen_gvec_ool_zz(DisasContext *s, gen_helper_gvec_2 *fn, + int rd, int rn, int data) +{ + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_2_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vsz, vsz, data, fn); +} + /* Invoke an out-of-line helper on 3 Zregs. */ static void gen_gvec_ool_zzz(DisasContext *s, gen_helper_gvec_3 *fn, int rd, int rn, int rm, int data) @@ -XXX,XX +XXX,XX @@ static bool trans_FEXPA(DisasContext *s, arg_rr_esz *a) return false; } if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_2_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vsz, vsz, 0, fns[a->esz]); + gen_gvec_ool_zz(s, fns[a->esz], a->rd, a->rn, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_REV_v(DisasContext *s, arg_rr_esz *a) }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_2_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vsz, vsz, 0, fns[a->esz]); + gen_gvec_ool_zz(s, fns[a->esz], a->rd, a->rn, 0); } return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than require the user to fill in the immediate (shl or shr), create full formats that include the immediate. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve.decode | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ @rd_rn_i6 ........ ... rn:5 ..... imm:s6 rd:5 &rri # Two register operand, one immediate operand, with predicate, -# element size encoded as TSZHL. User must fill in imm. -@rdn_pg_tszimm ........ .. ... ... ... pg:3 ..... rd:5 \ - &rpri_esz rn=%reg_movprfx esz=%tszimm_esz +# element size encoded as TSZHL. +@rdn_pg_tszimm_shl ........ .. ... ... ... pg:3 ..... rd:5 \ + &rpri_esz rn=%reg_movprfx esz=%tszimm_esz imm=%tszimm_shl +@rdn_pg_tszimm_shr ........ .. ... ... ... pg:3 ..... rd:5 \ + &rpri_esz rn=%reg_movprfx esz=%tszimm_esz imm=%tszimm_shr # Similarly without predicate. -@rd_rn_tszimm ........ .. ... ... ...... rn:5 rd:5 \ - &rri_esz esz=%tszimm16_esz +@rd_rn_tszimm_shl ........ .. ... ... ...... rn:5 rd:5 \ + &rri_esz esz=%tszimm16_esz imm=%tszimm16_shl +@rd_rn_tszimm_shr ........ .. ... ... ...... rn:5 rd:5 \ + &rri_esz esz=%tszimm16_esz imm=%tszimm16_shr # Two register operand, one immediate operand, with 4-bit predicate. # User must fill in imm. @@ -XXX,XX +XXX,XX @@ UMINV 00000100 .. 001 011 001 ... ..... ..... @rd_pg_rn ### SVE Shift by Immediate - Predicated Group # SVE bitwise shift by immediate (predicated) -ASR_zpzi 00000100 .. 000 000 100 ... .. ... ..... \ - @rdn_pg_tszimm imm=%tszimm_shr -LSR_zpzi 00000100 .. 000 001 100 ... .. ... ..... \ - @rdn_pg_tszimm imm=%tszimm_shr -LSL_zpzi 00000100 .. 000 011 100 ... .. ... ..... \ - @rdn_pg_tszimm imm=%tszimm_shl -ASRD 00000100 .. 000 100 100 ... .. ... ..... \ - @rdn_pg_tszimm imm=%tszimm_shr +ASR_zpzi 00000100 .. 000 000 100 ... .. ... ..... @rdn_pg_tszimm_shr +LSR_zpzi 00000100 .. 000 001 100 ... .. ... ..... @rdn_pg_tszimm_shr +LSL_zpzi 00000100 .. 000 011 100 ... .. ... ..... @rdn_pg_tszimm_shl +ASRD 00000100 .. 000 100 100 ... .. ... ..... @rdn_pg_tszimm_shr # SVE bitwise shift by vector (predicated) ASR_zpzz 00000100 .. 010 000 100 ... ..... ..... @rdn_pg_rm @@ -XXX,XX +XXX,XX @@ RDVL 00000100 101 11111 01010 imm:s6 rd:5 ### SVE Bitwise Shift - Unpredicated Group # SVE bitwise shift by immediate (unpredicated) -ASR_zzi 00000100 .. 1 ..... 1001 00 ..... ..... \ - @rd_rn_tszimm imm=%tszimm16_shr -LSR_zzi 00000100 .. 1 ..... 1001 01 ..... ..... \ - @rd_rn_tszimm imm=%tszimm16_shr -LSL_zzi 00000100 .. 1 ..... 1001 11 ..... ..... \ - @rd_rn_tszimm imm=%tszimm16_shl +ASR_zzi 00000100 .. 1 ..... 1001 00 ..... ..... @rd_rn_tszimm_shr +LSR_zzi 00000100 .. 1 ..... 1001 01 ..... ..... @rd_rn_tszimm_shr +LSL_zzi 00000100 .. 1 ..... 1001 11 ..... ..... @rd_rn_tszimm_shl # SVE bitwise shift by wide elements (unpredicated) # Note esz != 3 -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Unify add/sub helpers and add a parameter for rounding. This will allow saturating non-rounding to reuse this code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMM: fixed accidental use of '=' rather than '+=' in do_sqrdmlah_s] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vec_helper.c | 80 +++++++++++++++-------------------------- 1 file changed, 29 insertions(+), 51 deletions(-) diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #endif /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ -static int16_t inl_qrdmlah_s16(int16_t src1, int16_t src2, - int16_t src3, uint32_t *sat) +static int16_t do_sqrdmlah_h(int16_t src1, int16_t src2, int16_t src3, + bool neg, bool round, uint32_t *sat) { - /* Simplify: + /* + * Simplify: * = ((a3 << 16) + ((e1 * e2) << 1) + (1 << 15)) >> 16 * = ((a3 << 15) + (e1 * e2) + (1 << 14)) >> 15 */ int32_t ret = (int32_t)src1 * src2; - ret = ((int32_t)src3 << 15) + ret + (1 << 14); + if (neg) { + ret = -ret; + } + ret += ((int32_t)src3 << 15) + (round << 14); ret >>= 15; + if (ret != (int16_t)ret) { *sat = 1; - ret = (ret < 0 ? -0x8000 : 0x7fff); + ret = (ret < 0 ? INT16_MIN : INT16_MAX); } return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, uint32_t src2, uint32_t src3) { uint32_t *sat = &env->vfp.qc[0]; - uint16_t e1 = inl_qrdmlah_s16(src1, src2, src3, sat); - uint16_t e2 = inl_qrdmlah_s16(src1 >> 16, src2 >> 16, src3 >> 16, sat); + uint16_t e1 = do_sqrdmlah_h(src1, src2, src3, false, true, sat); + uint16_t e2 = do_sqrdmlah_h(src1 >> 16, src2 >> 16, src3 >> 16, + false, true, sat); return deposit32(e1, 16, 16, e2); } @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlah_s16)(void *vd, void *vn, void *vm, uintptr_t i; for (i = 0; i < opr_sz / 2; ++i) { - d[i] = inl_qrdmlah_s16(n[i], m[i], d[i], vq); + d[i] = do_sqrdmlah_h(n[i], m[i], d[i], false, true, vq); } clear_tail(d, opr_sz, simd_maxsz(desc)); } -/* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ -static int16_t inl_qrdmlsh_s16(int16_t src1, int16_t src2, - int16_t src3, uint32_t *sat) -{ - /* Similarly, using subtraction: - * = ((a3 << 16) - ((e1 * e2) << 1) + (1 << 15)) >> 16 - * = ((a3 << 15) - (e1 * e2) + (1 << 14)) >> 15 - */ - int32_t ret = (int32_t)src1 * src2; - ret = ((int32_t)src3 << 15) - ret + (1 << 14); - ret >>= 15; - if (ret != (int16_t)ret) { - *sat = 1; - ret = (ret < 0 ? -0x8000 : 0x7fff); - } - return ret; -} - uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, uint32_t src2, uint32_t src3) { uint32_t *sat = &env->vfp.qc[0]; - uint16_t e1 = inl_qrdmlsh_s16(src1, src2, src3, sat); - uint16_t e2 = inl_qrdmlsh_s16(src1 >> 16, src2 >> 16, src3 >> 16, sat); + uint16_t e1 = do_sqrdmlah_h(src1, src2, src3, true, true, sat); + uint16_t e2 = do_sqrdmlah_h(src1 >> 16, src2 >> 16, src3 >> 16, + true, true, sat); return deposit32(e1, 16, 16, e2); } @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, uintptr_t i; for (i = 0; i < opr_sz / 2; ++i) { - d[i] = inl_qrdmlsh_s16(n[i], m[i], d[i], vq); + d[i] = do_sqrdmlah_h(n[i], m[i], d[i], true, true, vq); } clear_tail(d, opr_sz, simd_maxsz(desc)); } /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ -static int32_t inl_qrdmlah_s32(int32_t src1, int32_t src2, - int32_t src3, uint32_t *sat) +static int32_t do_sqrdmlah_s(int32_t src1, int32_t src2, int32_t src3, + bool neg, bool round, uint32_t *sat) { /* Simplify similarly to int_qrdmlah_s16 above. */ int64_t ret = (int64_t)src1 * src2; - ret = ((int64_t)src3 << 31) + ret + (1 << 30); + if (neg) { + ret = -ret; + } + ret += ((int64_t)src3 << 31) + (round << 30); ret >>= 31; + if (ret != (int32_t)ret) { *sat = 1; ret = (ret < 0 ? INT32_MIN : INT32_MAX); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) { uint32_t *sat = &env->vfp.qc[0]; - return inl_qrdmlah_s32(src1, src2, src3, sat); + return do_sqrdmlah_s(src1, src2, src3, false, true, sat); } void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, uintptr_t i; for (i = 0; i < opr_sz / 4; ++i) { - d[i] = inl_qrdmlah_s32(n[i], m[i], d[i], vq); + d[i] = do_sqrdmlah_s(n[i], m[i], d[i], false, true, vq); } clear_tail(d, opr_sz, simd_maxsz(desc)); } -/* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ -static int32_t inl_qrdmlsh_s32(int32_t src1, int32_t src2, - int32_t src3, uint32_t *sat) -{ - /* Simplify similarly to int_qrdmlsh_s16 above. */ - int64_t ret = (int64_t)src1 * src2; - ret = ((int64_t)src3 << 31) - ret + (1 << 30); - ret >>= 31; - if (ret != (int32_t)ret) { - *sat = 1; - ret = (ret < 0 ? INT32_MIN : INT32_MAX); - } - return ret; -} - uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) { uint32_t *sat = &env->vfp.qc[0]; - return inl_qrdmlsh_s32(src1, src2, src3, sat); + return do_sqrdmlah_s(src1, src2, src3, true, true, sat); } void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, uintptr_t i; for (i = 0; i < opr_sz / 4; ++i) { - d[i] = inl_qrdmlsh_s32(n[i], m[i], d[i], vq); + d[i] = do_sqrdmlah_s(n[i], m[i], d[i], true, true, vq); } clear_tail(d, opr_sz, simd_maxsz(desc)); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 4 ++++ target/arm/translate-a64.c | 16 ++++++++++++++++ target/arm/vec_helper.c | 29 +++++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(gvec_uaba_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_uaba_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_uaba_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_mul_idx_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_mul_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_mul_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) data, gen_helper_gvec_fmlal_idx_a64); } return; + + case 0x08: /* MUL */ + if (!is_long && !is_scalar) { + static gen_helper_gvec_3 * const fns[3] = { + gen_helper_gvec_mul_idx_h, + gen_helper_gvec_mul_idx_s, + gen_helper_gvec_mul_idx_d, + }; + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + is_q ? 16 : 8, vec_full_reg_size(s), + index, fns[size - 1]); + return; + } + break; } if (size == 3) { diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ DO_3OP(gvec_rsqrts_d, helper_rsqrtsf_f64, float64) */ #define DO_MUL_IDX(NAME, TYPE, H) \ +void HELPER(NAME)(void *vd, void *vn, void *vm, uint32_t desc) \ +{ \ + intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE); \ + intptr_t idx = simd_data(desc); \ + TYPE *d = vd, *n = vn, *m = vm; \ + for (i = 0; i < oprsz / sizeof(TYPE); i += segment) { \ + TYPE mm = m[H(i + idx)]; \ + for (j = 0; j < segment; j++) { \ + d[i + j] = n[i + j] * mm; \ + } \ + } \ + clear_tail(d, oprsz, simd_maxsz(desc)); \ +} + +DO_MUL_IDX(gvec_mul_idx_h, uint16_t, H2) +DO_MUL_IDX(gvec_mul_idx_s, uint32_t, H4) +DO_MUL_IDX(gvec_mul_idx_d, uint64_t, ) + +#undef DO_MUL_IDX + +#define DO_FMUL_IDX(NAME, TYPE, H) \ void HELPER(NAME)(void *vd, void *vn, void *vm, void *stat, uint32_t desc) \ { \ intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE); \ @@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vm, void *stat, uint32_t desc) \ clear_tail(d, oprsz, simd_maxsz(desc)); \ } -DO_MUL_IDX(gvec_fmul_idx_h, float16, H2) -DO_MUL_IDX(gvec_fmul_idx_s, float32, H4) -DO_MUL_IDX(gvec_fmul_idx_d, float64, ) +DO_FMUL_IDX(gvec_fmul_idx_h, float16, H2) +DO_FMUL_IDX(gvec_fmul_idx_s, float32, H4) +DO_FMUL_IDX(gvec_fmul_idx_d, float64, ) -#undef DO_MUL_IDX +#undef DO_FMUL_IDX #define DO_FMLA_IDX(NAME, TYPE, H) \ void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 14 ++++++++++++++ target/arm/translate-a64.c | 34 ++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 25 +++++++++++++++++++++++++ 3 files changed, 73 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(gvec_mul_idx_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_mul_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_mul_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mla_idx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mla_idx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mla_idx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(gvec_mls_idx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mls_idx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mls_idx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; + + case 0x10: /* MLA */ + if (!is_long && !is_scalar) { + static gen_helper_gvec_4 * const fns[3] = { + gen_helper_gvec_mla_idx_h, + gen_helper_gvec_mla_idx_s, + gen_helper_gvec_mla_idx_d, + }; + tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + vec_full_reg_offset(s, rd), + is_q ? 16 : 8, vec_full_reg_size(s), + index, fns[size - 1]); + return; + } + break; + + case 0x14: /* MLS */ + if (!is_long && !is_scalar) { + static gen_helper_gvec_4 * const fns[3] = { + gen_helper_gvec_mls_idx_h, + gen_helper_gvec_mls_idx_s, + gen_helper_gvec_mls_idx_d, + }; + tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + vec_full_reg_offset(s, rd), + is_q ? 16 : 8, vec_full_reg_size(s), + index, fns[size - 1]); + return; + } + break; } if (size == 3) { diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ DO_MUL_IDX(gvec_mul_idx_d, uint64_t, ) #undef DO_MUL_IDX +#define DO_MLA_IDX(NAME, TYPE, OP, H) \ +void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc) \ +{ \ + intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE); \ + intptr_t idx = simd_data(desc); \ + TYPE *d = vd, *n = vn, *m = vm, *a = va; \ + for (i = 0; i < oprsz / sizeof(TYPE); i += segment) { \ + TYPE mm = m[H(i + idx)]; \ + for (j = 0; j < segment; j++) { \ + d[i + j] = a[i + j] OP n[i + j] * mm; \ + } \ + } \ + clear_tail(d, oprsz, simd_maxsz(desc)); \ +} + +DO_MLA_IDX(gvec_mla_idx_h, uint16_t, +, H2) +DO_MLA_IDX(gvec_mla_idx_s, uint32_t, +, H4) +DO_MLA_IDX(gvec_mla_idx_d, uint64_t, +, ) + +DO_MLA_IDX(gvec_mls_idx_h, uint16_t, -, H2) +DO_MLA_IDX(gvec_mls_idx_s, uint32_t, -, H4) +DO_MLA_IDX(gvec_mls_idx_d, uint64_t, -, ) + +#undef DO_MLA_IDX + #define DO_FMUL_IDX(NAME, TYPE, H) \ void HELPER(NAME)(void *vd, void *vn, void *vm, void *stat, uint32_t desc) \ { \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 10 ++++++++ target/arm/translate-a64.c | 33 ++++++++++++++++++-------- target/arm/vec_helper.c | 48 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 81 insertions(+), 10 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_mls_idx_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_mls_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(neon_sqdmulh_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(neon_sqdmulh_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(neon_sqrdmulh_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(neon_sqrdmulh_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3_fpst(DisasContext *s, bool is_q, int rd, int rn, tcg_temp_free_ptr(fpst); } +/* Expand a 3-operand + qc + operation using an out-of-line helper. */ +static void gen_gvec_op3_qc(DisasContext *s, bool is_q, int rd, int rn, + int rm, gen_helper_gvec_3_ptr *fn) +{ + TCGv_ptr qc_ptr = tcg_temp_new_ptr(); + + tcg_gen_addi_ptr(qc_ptr, cpu_env, offsetof(CPUARMState, vfp.qc)); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), qc_ptr, + is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); + tcg_temp_free_ptr(qc_ptr); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn) gen_gvec_fn3(s, is_q, rd, rn, rm, gen_gvec_mla, size); } return; + case 0x16: /* SQDMULH, SQRDMULH */ + { + static gen_helper_gvec_3_ptr * const fns[2][2] = { + { gen_helper_neon_sqdmulh_h, gen_helper_neon_sqrdmulh_h }, + { gen_helper_neon_sqdmulh_s, gen_helper_neon_sqrdmulh_s }, + }; + gen_gvec_op3_qc(s, is_q, rd, rn, rm, fns[size - 1][u]); + } + return; case 0x11: if (!u) { /* CMTST */ gen_gvec_fn3(s, is_q, rd, rn, rm, gen_gvec_cmtst, size); @@ -XXX,XX +XXX,XX @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn) genenvfn = fns[size][u]; break; } - case 0x16: /* SQDMULH, SQRDMULH */ - { - static NeonGenTwoOpEnvFn * const fns[2][2] = { - { gen_helper_neon_qdmulh_s16, gen_helper_neon_qrdmulh_s16 }, - { gen_helper_neon_qdmulh_s32, gen_helper_neon_qrdmulh_s32 }, - }; - assert(size == 1 || size == 2); - genenvfn = fns[size - 1][u]; - break; - } default: g_assert_not_reached(); } diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, clear_tail(d, opr_sz, simd_maxsz(desc)); } +void HELPER(neon_sqdmulh_h)(void *vd, void *vn, void *vm, + void *vq, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + int16_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = do_sqrdmlah_h(n[i], m[i], 0, false, false, vq); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(neon_sqrdmulh_h)(void *vd, void *vn, void *vm, + void *vq, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + int16_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = do_sqrdmlah_h(n[i], m[i], 0, false, true, vq); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ static int32_t do_sqrdmlah_s(int32_t src1, int32_t src2, int32_t src3, bool neg, bool round, uint32_t *sat) @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, clear_tail(d, opr_sz, simd_maxsz(desc)); } +void HELPER(neon_sqdmulh_s)(void *vd, void *vn, void *vm, + void *vq, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + int32_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = do_sqrdmlah_s(n[i], m[i], 0, false, false, vq); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(neon_sqrdmulh_s)(void *vd, void *vn, void *vm, + void *vq, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + int32_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = do_sqrdmlah_s(n[i], m[i], 0, false, true, vq); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Integer 8 and 16-bit dot-product. * * Note that for the loops herein, host endianness does not matter -- 2.20.1 The following changes since commit 5767815218efd3cbfd409505ed824d5f356044ae: Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging (2024-02-14 15:45:52 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240215 for you to fetch changes up to f780e63fe731b058fe52d43653600d8729a1b5f2: docs: Add documentation for the mps3-an536 board (2024-02-15 14:32:39 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC * linux-user/aarch64: Choose SYNC as the preferred MTE mode * Fix some errors in SVE/SME handling of MTE tags * hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses * hw/block/tc58128: Don't emit deprecation warning under qtest * tests/qtest: Fix handling of npcm7xx and GMAC tests * hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ * tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend * Don't assert on vmload/vmsave of M-profile CPUs * hw/arm/smmuv3: add support for stage 1 access fault * hw/arm/stellaris: QOM cleanups * Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs * Improve Cortex_R52 IMPDEF sysreg modelling * Allow access to SPSR_hyp from hyp mode * New board model mps3-an536 (Cortex-R52) ---------------------------------------------------------------- Luc Michel (1): hw/arm/smmuv3: add support for stage 1 access fault Nabih Estefan (1): tests/qtest: Fix GMAC test to run on a machine in upstream QEMU Peter Maydell (22): hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses hw/block/tc58128: Don't emit deprecation warning under qtest tests/qtest/meson.build: Don't include qtests_npcm7xx in qtests_aarch64 tests/qtest/bios-tables-test: Allow changes to virt GTDT hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ tests/qtest/bios-tables-tests: Update virt golden reference hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modules tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU target/arm: Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs target/arm: The Cortex-R52 has a read-only CBAR target/arm: Add Cortex-R52 IMPDEF sysregs target/arm: Allow access to SPSR_hyp from hyp mode hw/misc/mps2-scc: Fix condition for CFG3 register hw/misc/mps2-scc: Factor out which-board conditionals hw/misc/mps2-scc: Make changes needed for AN536 FPGA image hw/arm/mps3r: Initial skeleton for mps3-an536 board hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAM hw/arm/mps3r: Add UARTs hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devices hw/arm/mps3r: Add remaining devices docs: Add documentation for the mps3-an536 board Philippe Mathieu-Daudé (5): hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC hw/arm/stellaris: Convert ADC controller to Resettable interface hw/arm/stellaris: Convert I2C controller to Resettable interface hw/arm/stellaris: Add missing QOM 'machine' parent hw/arm/stellaris: Add missing QOM 'SoC' parent Richard Henderson (6): linux-user/aarch64: Choose SYNC as the preferred MTE mode target/arm: Fix nregs computation in do_{ld,st}_zpa target/arm: Adjust and validate mtedesc sizem1 target/arm: Split out make_svemte_desc target/arm: Handle mte in do_ldrq, do_ldro target/arm: Fix SVE/SME gross MTE suppression checks MAINTAINERS | 3 +- docs/system/arm/mps2.rst | 37 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + include/hw/arm/virt.h | 2 + include/hw/misc/mps2-scc.h | 1 + linux-user/aarch64/target_prctl.h | 29 +- target/arm/internals.h | 2 +- target/arm/tcg/translate-a64.h | 2 + hw/arm/mps3r.c | 640 ++++++++++++++++++++++++++++++++ hw/arm/npcm7xx.c | 1 + hw/arm/smmu-common.c | 11 + hw/arm/smmuv3.c | 1 + hw/arm/stellaris.c | 47 ++- hw/arm/virt-acpi-build.c | 20 +- hw/arm/virt.c | 60 ++- hw/arm/xilinx_zynq.c | 2 + hw/block/tc58128.c | 4 +- hw/misc/mps2-scc.c | 138 ++++++- hw/pci-host/raven.c | 1 + target/arm/helper.c | 14 +- target/arm/tcg/cpu32.c | 109 ++++++ target/arm/tcg/op_helper.c | 43 ++- target/arm/tcg/sme_helper.c | 8 +- target/arm/tcg/sve_helper.c | 12 +- target/arm/tcg/translate-sme.c | 15 +- target/arm/tcg/translate-sve.c | 83 +++-- target/arm/tcg/translate.c | 19 +- tests/qtest/npcm7xx_emc-test.c | 5 +- tests/qtest/npcm_gmac-test.c | 84 +---- hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes tests/qtest/meson.build | 4 +- 36 files changed, 1184 insertions(+), 222 deletions(-) create mode 100644 hw/arm/mps3r.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards, connect FIQ output of the GIC CPU interfaces to the CPU. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240130152548.17855-1-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ)); for (n = 0; n < 64; n++) { pic[n] = qdev_get_gpio_in(dev, n); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The API does not generate an error for setting ASYNC | SYNC; that merely constrains the selection vs the per-cpu default. For qemu linux-user, choose SYNC as the default. Cc: qemu-stable@nongnu.org Reported-by: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_set_tagged_addr_ctrl(CPUArchState *env, abi_long arg2) env->tagged_addr_enable = arg2 & PR_TAGGED_ADDR_ENABLE; if (cpu_isar_feature(aa64_mte, cpu)) { - switch (arg2 & PR_MTE_TCF_MASK) { - case PR_MTE_TCF_NONE: - case PR_MTE_TCF_SYNC: - case PR_MTE_TCF_ASYNC: - break; - default: - return -EINVAL; - } - /* * Write PR_MTE_TCF to SCTLR_EL1[TCF0]. - * Note that the syscall values are consistent with hw. + * + * The kernel has a per-cpu configuration for the sysadmin, + * /sys/devices/system/cpu/cpu<N>/mte_tcf_preferred, + * which qemu does not implement. + * + * Because there is no performance difference between the modes, and + * because SYNC is most useful for debugging MTE errors, choose SYNC + * as the preferred mode. With this preference, and the way the API + * uses only two bits, there is no way for the program to select + * ASYMM mode. */ - env->cp15.sctlr_el[1] = - deposit64(env->cp15.sctlr_el[1], 38, 2, arg2 >> PR_MTE_TCF_SHIFT); + unsigned tcf = 0; + if (arg2 & PR_MTE_TCF_SYNC) { + tcf = 1; + } else if (arg2 & PR_MTE_TCF_ASYNC) { + tcf = 2; + } + env->cp15.sctlr_el[1] = deposit64(env->cp15.sctlr_el[1], 38, 2, tcf); /* * Write PR_MTE_TAG to GCR_EL1[Exclude]. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The field is encoded as [0-3], which is convenient for indexing our array of function pointers, but the true value is [1-4]. Adjust before calling do_mem_zpa. Add an assert, and move the comment re passing ZT to the helper back next to the relevant code. Cc: qemu-stable@nongnu.org Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, TCGv_ptr t_pg; int desc = 0; - /* - * For e.g. LD4, there are not enough arguments to pass all 4 - * registers as pointers, so encode the regno into the data field. - * For consistency, do this even for LD1. - */ + assert(mte_n >= 1 && mte_n <= 4); if (s->mte_active[0]) { int msz = dtype_msz(dtype); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, addr = clean_data_tbi(s, addr); } + /* + * For e.g. LD4, there are not enough arguments to pass all 4 + * registers as pointers, so encode the regno into the data field. + * For consistency, do this even for LD1. + */ desc = simd_desc(vsz, vsz, zt | desc); t_pg = tcg_temp_new_ptr(); @@ -XXX,XX +XXX,XX @@ static void do_ld_zpa(DisasContext *s, int zt, int pg, * accessible via the instruction encoding. */ assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, dtype, nreg, false, fn); + do_mem_zpa(s, zt, pg, addr, dtype, nreg + 1, false, fn); } static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a) @@ -XXX,XX +XXX,XX @@ static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, if (nreg == 0) { /* ST1 */ fn = fn_single[s->mte_active[0]][be][msz][esz]; - nreg = 1; } else { /* ST2, ST3, ST4 -- msz == esz, enforced by encoding */ assert(msz == esz); fn = fn_multiple[s->mte_active[0]][be][nreg - 1][msz]; } assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg, true, fn); + do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg + 1, true, fn); } static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When we added SVE_MTEDESC_SHIFT, we effectively limited the maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored fits within the field (expecting 8 * 4 - 1 == 31, exact fit). Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 +- target/arm/tcg/translate-sve.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, TBI, 4, 2) FIELD(MTEDESC, TCMA, 6, 2) FIELD(MTEDESC, WRITE, 8, 1) FIELD(MTEDESC, ALIGN, 9, 3) -FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - 12) /* size - 1 */ +FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - SVE_MTEDESC_SHIFT - 12) /* size - 1 */ bool mte_probe(CPUARMState *env, uint32_t desc, uint64_t ptr); uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, { unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; + uint32_t sizem1; int desc = 0; assert(mte_n >= 1 && mte_n <= 4); + sizem1 = (mte_n << dtype_msz(dtype)) - 1; + assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); if (s->mte_active[0]) { - int msz = dtype_msz(dtype); - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (mte_n << msz) - 1); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; } else { addr = clean_data_tbi(s, addr); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Share code that creates mtedesc and embeds within simd_desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-a64.h | 2 ++ target/arm/tcg/translate-sme.c | 15 +++-------- target/arm/tcg/translate-sve.c | 47 ++++++++++++++++++---------------- 3 files changed, 31 insertions(+), 33 deletions(-) diff --git a/target/arm/tcg/translate-a64.h b/target/arm/tcg/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.h +++ b/target/arm/tcg/translate-a64.h @@ -XXX,XX +XXX,XX @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, bool sve_access_check(DisasContext *s); bool sme_enabled_check(DisasContext *s); bool sme_enabled_check_with_svcr(DisasContext *s, unsigned); +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data); /* This function corresponds to CheckStreamingSVEEnabled. */ static inline bool sme_sm_enabled_check(DisasContext *s) diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sme.c +++ b/target/arm/tcg/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) TCGv_ptr t_za, t_pg; TCGv_i64 addr; - int svl, desc = 0; + uint32_t desc; bool be = s->be_data == MO_BE; bool mte = s->mte_active[0]; @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); - if (mte) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, a->st); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << a->esz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } else { + if (!mte) { addr = clean_data_tbi(s, addr); } - svl = streaming_vec_reg_size(s); - desc = simd_desc(svl, svl, desc); + + desc = make_svemte_desc(s, streaming_vec_reg_size(s), 1, a->esz, a->st, 0); fns[a->esz][be][a->v][mte][a->st](tcg_env, t_za, t_pg, addr, tcg_constant_i32(desc)); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static const uint8_t dtype_esz[16] = { 3, 2, 1, 3 }; -static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, - int dtype, uint32_t mte_n, bool is_write, - gen_helper_gvec_mem *fn) +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data) { - unsigned vsz = vec_full_reg_size(s); - TCGv_ptr t_pg; uint32_t sizem1; - int desc = 0; + uint32_t desc = 0; - assert(mte_n >= 1 && mte_n <= 4); - sizem1 = (mte_n << dtype_msz(dtype)) - 1; + /* Assert all of the data fits, with or without MTE enabled. */ + assert(nregs >= 1 && nregs <= 4); + sizem1 = (nregs << msz) - 1; assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); + assert(data < 1u << SVE_MTEDESC_SHIFT); + if (s->mte_active[0]) { desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; - } else { + } + return simd_desc(vsz, vsz, desc | data); +} + +static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, + int dtype, uint32_t nregs, bool is_write, + gen_helper_gvec_mem *fn) +{ + TCGv_ptr t_pg; + uint32_t desc; + + if (!s->mte_active[0]) { addr = clean_data_tbi(s, addr); } @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, * registers as pointers, so encode the regno into the data field. * For consistency, do this even for LD1. */ - desc = simd_desc(vsz, vsz, zt | desc); + desc = make_svemte_desc(s, vec_full_reg_size(s), nregs, + dtype_msz(dtype), is_write, zt); t_pg = tcg_temp_new_ptr(); tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, int scale, TCGv_i64 scalar, int msz, bool is_write, gen_helper_gvec_mem_scatter *fn) { - unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_zm = tcg_temp_new_ptr(); TCGv_ptr t_pg = tcg_temp_new_ptr(); TCGv_ptr t_zt = tcg_temp_new_ptr(); - int desc = 0; - - if (s->mte_active[0]) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << msz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } - desc = simd_desc(vsz, vsz, desc | scale); + uint32_t desc; tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); tcg_gen_addi_ptr(t_zm, tcg_env, vec_full_reg_offset(s, zm)); tcg_gen_addi_ptr(t_zt, tcg_env, vec_full_reg_offset(s, zt)); + + desc = make_svemte_desc(s, vec_full_reg_size(s), 1, msz, is_write, scale); fn(tcg_env, t_zt, t_pg, t_zm, scalar, tcg_constant_i32(desc)); } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> These functions "use the standard load helpers", but fail to clean_data_tbi or populate mtedesc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; int poff; + uint32_t desc; /* Load the first quadword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } + poff = pred_full_reg_offset(s, pg); if (vsz > 16) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(16, 16, zt))); + desc = make_svemte_desc(s, 16, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* Replicate that first quadword. */ if (vsz > 16) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz_r32; TCGv_ptr t_pg; int poff, doff; + uint32_t desc; if (vsz < 32) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) } /* Load the first octaword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } poff = pred_full_reg_offset(s, pg); if (vsz > 32) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(32, 32, zt))); + desc = make_svemte_desc(s, 32, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* * Replicate that first octaword. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The TBI and TCMA bits are located within mtedesc, not desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/sme_helper.c | 8 ++++---- target/arm/tcg/sve_helper.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sme_helper.c +++ b/target/arm/tcg/sme_helper.c @@ -XXX,XX +XXX,XX @@ void sme_ld1_mte(CPUARMState *env, void *za, uint64_t *vg, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sme_st1_mte(CPUARMState *env, void *za, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sve_helper.c +++ b/target/arm/tcg/sve_helper.c @@ -XXX,XX +XXX,XX @@ void sve_ldN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r_mte(CPUARMState *env, void *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_stN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } -- 2.34.1 The raven_io_ops MemoryRegionOps is the only one in the source tree which sets .valid.unaligned to indicate that it should support unaligned accesses and which does not also set .impl.unaligned to indicate that its read and write functions can do the unaligned handling themselves. This is a problem, because at the moment the core memory system does not implement the support for handling unaligned accesses by doing a series of aligned accesses and combining them (system/memory.c:access_with_adjusted_size() has a TODO comment noting this). Fortunately raven_io_read() and raven_io_write() will correctly deal with the case of being passed an unaligned address, so we can fix the missing unaligned access support by setting .impl.unaligned in the MemoryRegionOps struct. Fixes: 9a1839164c9c8f06 ("raven: Implement non-contiguous I/O region") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org --- hw/pci-host/raven.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/raven.c +++ b/hw/pci-host/raven.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps raven_io_ops = { .write = raven_io_write, .endianness = DEVICE_LITTLE_ENDIAN, .impl.max_access_size = 4, + .impl.unaligned = true, .valid.unaligned = true, }; -- 2.34.1 Suppress the deprecation warning when we're running under qtest, to avoid "make check" including warning messages in its output. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206154151.155620-1-peter.maydell@linaro.org --- hw/block/tc58128.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/block/tc58128.c b/hw/block/tc58128.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/tc58128.c +++ b/hw/block/tc58128.c @@ -XXX,XX +XXX,XX @@ static sh7750_io_device tc58128 = { int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2) { - warn_report_once("The TC58128 flash device is deprecated"); + if (!qtest_enabled()) { + warn_report_once("The TC58128 flash device is deprecated"); + } init_dev(&tc58128_devs[0], zone1); init_dev(&tc58128_devs[1], zone2); return sh7750_register_io_device(s, &tc58128); -- 2.34.1 We deliberately don't include qtests_npcm7xx in qtests_aarch64, because we already get the coverage of those tests via qtests_arm, and we don't want to use extra CI minutes testing them twice. In commit 327b680877b79c4b we added it to qtests_aarch64; revert that change. Fixes: 327b680877b79c4b ("tests/qtest: Creating qtest for GMAC Module") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206163043.315535-1-peter.maydell@linaro.org --- tests/qtest/meson.build | 1 - 1 file changed, 1 deletion(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ (config_all_accel.has_key('CONFIG_TCG') and \ config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \ - (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', 'numa-test', 'boot-serial-test', -- 2.34.1 Allow changes to the virt GTDT -- we are going to add the IRQ entry for a new timer to it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-2-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,3 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/FACP", +"tests/data/acpi/virt/GTDT", -- 2.34.1 Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a non-secure EL2 virtual timer. We implemented the timer itself in the CPU model, but never wired up its IRQ line to the GIC. Wire up the IRQ line (this is always safe whether the CPU has the interrupt or not, since it always creates the outbound IRQ line). Report it to the guest via dtb and ACPI if the CPU has the feature. The DTB binding is documented in the kernel's Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml and the ACPI table entries are documented in the ACPI specification version 6.3 or later. Because the IRQ line ACPI binding is new in 6.3, we need to bump the FADT table rev to show that we might be using 6.3 features. Note that exposing this IRQ in the DTB will trigger a bug in EDK2 versions prior to edk2-stable202311, for users who use the virt board with 'virtualization=on' to enable EL2 emulation and are booting an EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is that EDK2 will assert on bootup: ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48 If you see that assertion you should do one of: * update your EDK2 binaries to edk2-stable202311 or newer * use the 'virt-8.2' versioned machine type * not use 'virtualization=on' (The versions shipped with QEMU itself have the fix.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-3-peter.maydell@linaro.org --- include/hw/arm/virt.h | 2 ++ hw/arm/virt-acpi-build.c | 20 ++++++++++---- hw/arm/virt.c | 60 ++++++++++++++++++++++++++++++++++------ 3 files changed, 67 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { /* Machines < 6.2 have no support for describing cpu topology to guest */ bool no_cpu_topology; bool no_tcg_lpa2; + bool no_ns_el2_virt_timer_irq; }; struct VirtMachineState { @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { PCIBus *bus; char *oem_id; char *oem_table_id; + bool ns_el2_virt_timer_irq; }; #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } /* - * ACPI spec, Revision 5.1 - * 5.2.24 Generic Timer Description Table (GTDT) + * ACPI spec, Revision 6.5 + * 5.2.25 Generic Timer Description Table (GTDT) */ static void build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) uint32_t irqflags = vmc->claim_edge_triggered_timers ? 1 : /* Interrupt is Edge triggered */ 0; /* Interrupt is Level triggered */ - AcpiTable table = { .sig = "GTDT", .rev = 2, .oem_id = vms->oem_id, + AcpiTable table = { .sig = "GTDT", .rev = 3, .oem_id = vms->oem_id, .oem_table_id = vms->oem_table_id }; acpi_table_begin(&table, table_data); @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) build_append_int_noprefix(table_data, 0, 4); /* Platform Timer Offset */ build_append_int_noprefix(table_data, 0, 4); - + if (vms->ns_el2_virt_timer_irq) { + /* Virtual EL2 Timer GSIV */ + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_VIRT_IRQ, 4); + /* Virtual EL2 Timer Flags */ + build_append_int_noprefix(table_data, irqflags, 4); + } else { + build_append_int_noprefix(table_data, 0, 4); + build_append_int_noprefix(table_data, 0, 4); + } acpi_table_end(linker, &table); } @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) static void build_fadt_rev6(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms, unsigned dsdt_tbl_offset) { - /* ACPI v6.0 */ + /* ACPI v6.3 */ AcpiFadtData fadt = { .rev = 6, - .minor_ver = 0, + .minor_ver = 3, .flags = 1 << ACPI_FADT_F_HW_REDUCED_ACPI, .xdsdt_tbl_offset = &dsdt_tbl_offset, }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_randomness(MachineState *ms, const char *node) qemu_fdt_setprop(ms->fdt, node, "rng-seed", seed.rng, sizeof(seed.rng)); } +/* + * The CPU object always exposes the NS EL2 virt timer IRQ line, + * but we don't want to advertise it to the guest in the dtb or ACPI + * table unless it's really going to do something. + */ +static bool ns_el2_virt_timer_present(void) +{ + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0)); + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_AARCH64) && + arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu); +} + static void create_fdt(VirtMachineState *vms) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) "arm,armv7-timer"); } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); - qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + if (vms->ns_el2_virt_timer_irq) { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_VIRT_IRQ), irqflags); + } else { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + } } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ, }; for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); object_unref(cpuobj); } + + /* Now we've created the CPUs we can see if they have the hypvirt timer */ + vms->ns_el2_virt_timer_irq = ns_el2_virt_timer_present() && + !vmc->no_ns_el2_virt_timer_irq; + fdt_add_timer_nodes(vms); fdt_add_cpu_nodes(vms); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(9, 0) static void virt_machine_8_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_9_0_options(mc); compat_props_add(mc->compat_props, hw_compat_8_2, hw_compat_8_2_len); + /* + * Don't expose NS_EL2_VIRT timer IRQ in DTB on ACPI on 8.2 and + * earlier machines. (Exposing it tickles a bug in older EDK2 + * guest BIOS binaries.) + */ + vmc->no_ns_el2_virt_timer_irq = true; } DEFINE_VIRT_MACHINE(8, 2) -- 2.34.1 Update the virt golden reference files to say that the FACP is ACPI v6.3, and the GTDT table is a revision 3 table with space for the virtual EL2 timer. Diffs from iasl: @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/FACP, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-W8RZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [FACP] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] [004h 0004 4] Table Length : 00000114 [008h 0008 1] Revision : 06 -[009h 0009 1] Checksum : 15 +[009h 0009 1] Checksum : 12 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 4] FACS Address : 00000000 [028h 0040 4] DSDT Address : 00000000 [02Ch 0044 1] Model : 00 [02Dh 0045 1] PM Profile : 00 [Unspecified] [02Eh 0046 2] SCI Interrupt : 0000 [030h 0048 4] SMI Command Port : 00000000 [034h 0052 1] ACPI Enable Value : 00 [035h 0053 1] ACPI Disable Value : 00 [036h 0054 1] S4BIOS Command : 00 [037h 0055 1] P-State Control : 00 @@ -XXX,XX +XXX,XX @@ Use APIC Physical Destination Mode (V4) : 0 Hardware Reduced (V5) : 1 Low Power S0 Idle (V5) : 0 [074h 0116 12] Reset Register : [Generic Address Structure] [074h 0116 1] Space ID : 00 [SystemMemory] [075h 0117 1] Bit Width : 00 [076h 0118 1] Bit Offset : 00 [077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy] [078h 0120 8] Address : 0000000000000000 [080h 0128 1] Value to cause reset : 00 [081h 0129 2] ARM Flags (decoded below) : 0003 PSCI Compliant : 1 Must use HVC for PSCI : 1 -[083h 0131 1] FADT Minor Revision : 00 +[083h 0131 1] FADT Minor Revision : 03 [084h 0132 8] FACS Address : 0000000000000000 [08Ch 0140 8] DSDT Address : 0000000000000000 [094h 0148 12] PM1A Event Block : [Generic Address Structure] [094h 0148 1] Space ID : 00 [SystemMemory] [095h 0149 1] Bit Width : 00 [096h 0150 1] Bit Offset : 00 [097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy] [098h 0152 8] Address : 0000000000000000 [0A0h 0160 12] PM1B Event Block : [Generic Address Structure] [0A0h 0160 1] Space ID : 00 [SystemMemory] [0A1h 0161 1] Bit Width : 00 [0A2h 0162 1] Bit Offset : 00 [0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy] [0A4h 0164 8] Address : 0000000000000000 @@ -XXX,XX +XXX,XX @@ [0F5h 0245 1] Bit Width : 00 [0F6h 0246 1] Bit Offset : 00 [0F7h 0247 1] Encoded Access Width : 00 [Undefined/Legacy] [0F8h 0248 8] Address : 0000000000000000 [100h 0256 12] Sleep Status Register : [Generic Address Structure] [100h 0256 1] Space ID : 00 [SystemMemory] [101h 0257 1] Bit Width : 00 [102h 0258 1] Bit Offset : 00 [103h 0259 1] Encoded Access Width : 00 [Undefined/Legacy] [104h 0260 8] Address : 0000000000000000 [10Ch 0268 8] Hypervisor ID : 00000000554D4551 Raw Table Data: Length 276 (0x114) - 0000: 46 41 43 50 14 01 00 00 06 15 42 4F 43 48 53 20 // FACP......BOCHS + 0000: 46 41 43 50 14 01 00 00 06 12 42 4F 43 48 53 20 // FACP......BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0070: 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ - 0080: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ + 0080: 00 03 00 03 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0100: 00 00 00 00 00 00 00 00 00 00 00 00 51 45 4D 55 // ............QEMU 0110: 00 00 00 00 // .... @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/GTDT, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-XDSZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [GTDT] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "GTDT" [Generic Timer Description Table] -[004h 0004 4] Table Length : 00000060 -[008h 0008 1] Revision : 02 -[009h 0009 1] Checksum : 9C +[004h 0004 4] Table Length : 00000068 +[008h 0008 1] Revision : 03 +[009h 0009 1] Checksum : 93 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 8] Counter Block Address : FFFFFFFFFFFFFFFF [02Ch 0044 4] Reserved : 00000000 [030h 0048 4] Secure EL1 Interrupt : 0000001D [034h 0052 4] EL1 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [038h 0056 4] Non-Secure EL1 Interrupt : 0000001E @@ -XXX,XX +XXX,XX @@ [040h 0064 4] Virtual Timer Interrupt : 0000001B [044h 0068 4] VT Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [048h 0072 4] Non-Secure EL2 Interrupt : 0000001A [04Ch 0076 4] NEL2 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [050h 0080 8] Counter Read Block Address : FFFFFFFFFFFFFFFF [058h 0088 4] Platform Timer Count : 00000000 [05Ch 0092 4] Platform Timer Offset : 00000000 +[060h 0096 4] Virtual EL2 Timer GSIV : 00000000 +[064h 0100 4] Virtual EL2 Timer Flags : 00000000 -Raw Table Data: Length 96 (0x60) +Raw Table Data: Length 104 (0x68) - 0000: 47 54 44 54 60 00 00 00 02 9C 42 4F 43 48 53 20 // GTDT`.....BOCHS + 0000: 47 54 44 54 68 00 00 00 03 93 42 4F 43 48 53 20 // GTDTh.....BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 // ................ 0030: 1D 00 00 00 00 00 00 00 1E 00 00 00 04 00 00 00 // ................ 0040: 1B 00 00 00 00 00 00 00 1A 00 00 00 00 00 00 00 // ................ 0050: FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 // ................ + 0060: 00 00 00 00 00 00 00 00 // ........ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-4-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,3 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/FACP", -"tests/data/acpi/virt/GTDT", diff --git a/tests/data/acpi/virt/FACP b/tests/data/acpi/virt/FACP index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 gcmbQjG=+)F&CxkPgpq-PO=u!l<;2F$$vli407<0<)c^nh delta 28 kcmbQjG=+)F&CxkPgpq-PO>`nx<-|!<6Akz$^DuG%0AAS!ssI20 diff --git a/tests/data/acpi/virt/GTDT b/tests/data/acpi/virt/GTDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 bcmYeu;BpUf3CUn!U|^m+kt>V?$N&QXMtB4L delta 16 Xcmc~u;BpUf2}xjJU|^avkt+-UB60)u -- 2.34.1 The patchset adding the GMAC ethernet to this SoC crossed in the mail with the patchset cleaning up the NIC handling. When we create the GMAC modules we must call qemu_configure_nic_device() so that the user has the opportunity to use the -nic commandline option to create a network backend and connect it to the GMACs. Add the missing call. Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-id: 20240206171231.396392-2-peter.maydell@linaro.org --- hw/arm/npcm7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(s->gmac); i++) { SysBusDevice *sbd = SYS_BUS_DEVICE(&s->gmac[i]); + qemu_configure_nic_device(DEVICE(sbd), false, NULL); /* * The device exists regardless of whether it's connected to a QEMU * netdev backend. So always instantiate it even if there is no -- 2.34.1 Currently QEMU will warn if there is a NIC on the board that is not connected to a backend. By default the '-nic user' will get used for all NICs, but if you manually connect a specific NIC to a specific backend, then the other NICs on the board have no backend and will be warned about: qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer qemu-system-arm: warning: nic npcm-gmac.0 has no peer qemu-system-arm: warning: nic npcm-gmac.1 has no peer So suppress those warnings by manually connecting every NIC on the board to some backend. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20240206171231.396392-3-peter.maydell@linaro.org --- tests/qtest/npcm7xx_emc-test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tests/qtest/npcm7xx_emc-test.c b/tests/qtest/npcm7xx_emc-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_emc-test.c +++ b/tests/qtest/npcm7xx_emc-test.c @@ -XXX,XX +XXX,XX @@ static int *packet_test_init(int module_num, GString *cmd_line) * KISS and use -nic. The driver accepts 'emc0' and 'emc1' as aliases * in the 'model' field to specify the device to match. */ - g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d ", + g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d " + "-nic user,model=npcm7xx-emc " + "-nic user,model=npcm-gmac " + "-nic user,model=npcm-gmac", test_sockets[1], module_num); g_test_queue_destroy(packet_test_clear, test_sockets); -- 2.34.1 It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile CPU, and in fact if you try to do it we will assert: #6 0x00007ffff4b95e96 in __GI___assert_fail (assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101 #7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600 #8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595 #9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512 We might call pmu_counter_enabled() on an M-profile CPU (for example from the migration pre/post hooks in machine.c); this should always return false because these CPUs don't set ARM_FEATURE_PMU. Avoid the assertion by not calling arm_mdcr_el2_eff() before we have done the early return for "PMU not present". This fixes an assertion failure if you try to do a loadvm or savevm for an M-profile board. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240208153346.970021-1-peter.maydell@linaro.org --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) bool enabled, prohibited = false, filtered; bool secure = arm_is_secure(env); int el = arm_current_el(env); - uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); - uint8_t hpmn = mdcr_el2 & MDCR_HPMN; + uint64_t mdcr_el2; + uint8_t hpmn; + /* + * We might be called for M-profile cores where MDCR_EL2 doesn't + * exist and arm_mdcr_el2_eff() will assert, so this early-exit check + * must be before we read that value. + */ if (!arm_feature(env, ARM_FEATURE_PMU)) { return false; } + mdcr_el2 = arm_mdcr_el2_eff(env); + hpmn = mdcr_el2 & MDCR_HPMN; + if (!arm_feature(env, ARM_FEATURE_EL2) || (counter < hpmn || counter == 31)) { e = env->cp15.c9_pmcr & PMCRE; -- 2.34.1 From: Nabih Estefan <nabihestefan@google.com> Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead of 8xx. Also fix comments referencing this and values expecting 8xx. Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8 Signed-Off-By: Nabih Estefan <nabihestefan@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Message-id: 20240208194759.2858582-2-nabihestefan@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: commit message tweaks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm_gmac-test.c | 84 +----------------------------------- tests/qtest/meson.build | 3 +- 2 files changed, 4 insertions(+), 83 deletions(-) diff --git a/tests/qtest/npcm_gmac-test.c b/tests/qtest/npcm_gmac-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm_gmac-test.c +++ b/tests/qtest/npcm_gmac-test.c @@ -XXX,XX +XXX,XX @@ typedef struct TestData { const GMACModule *module; } TestData; -/* Values extracted from hw/arm/npcm8xx.c */ +/* Values extracted from hw/arm/npcm7xx.c */ static const GMACModule gmac_module_list[] = { { .irq = 14, @@ -XXX,XX +XXX,XX @@ static const GMACModule gmac_module_list[] = { .irq = 15, .base_addr = 0xf0804000 }, - { - .irq = 16, - .base_addr = 0xf0806000 - }, - { - .irq = 17, - .base_addr = 0xf0808000 - } }; /* Returns the index of the GMAC module. */ @@ -XXX,XX +XXX,XX @@ static uint32_t gmac_read(QTestState *qts, const GMACModule *mod, return qtest_readl(qts, mod->base_addr + regno); } -static uint16_t pcs_read(QTestState *qts, const GMACModule *mod, - NPCMRegister regno) -{ - uint32_t write_value = (regno & 0x3ffe00) >> 9; - qtest_writel(qts, PCS_BASE_ADDRESS + NPCM_PCS_IND_AC_BA, write_value); - uint32_t read_offset = regno & 0x1ff; - return qtest_readl(qts, PCS_BASE_ADDRESS + read_offset); -} - /* Check that GMAC registers are reset to default value */ static void test_init(gconstpointer test_data) { const TestData *td = test_data; const GMACModule *mod = td->module; - QTestState *qts = qtest_init("-machine npcm845-evb"); + QTestState *qts = qtest_init("-machine npcm750-evb"); #define CHECK_REG32(regno, value) \ do { \ g_assert_cmphex(gmac_read(qts, mod, (regno)), ==, (value)); \ } while (0) -#define CHECK_REG_PCS(regno, value) \ - do { \ - g_assert_cmphex(pcs_read(qts, mod, (regno)), ==, (value)); \ - } while (0) - CHECK_REG32(NPCM_DMA_BUS_MODE, 0x00020100); CHECK_REG32(NPCM_DMA_XMT_POLL_DEMAND, 0); CHECK_REG32(NPCM_DMA_RCV_POLL_DEMAND, 0); @@ -XXX,XX +XXX,XX @@ static void test_init(gconstpointer test_data) CHECK_REG32(NPCM_GMAC_PTP_TAR, 0); CHECK_REG32(NPCM_GMAC_PTP_TTSR, 0); - /* TODO Add registers PCS */ - if (mod->base_addr == 0xf0802000) { - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID2, 0); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_STS, 0x8000); - - CHECK_REG_PCS(NPCM_PCS_SR_MII_CTRL, 0x1140); - CHECK_REG_PCS(NPCM_PCS_SR_MII_STS, 0x0109); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID2, 0x0ced0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_ADV, 0x0020); - CHECK_REG_PCS(NPCM_PCS_SR_MII_LP_BABL, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_EXPN, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_EXT_STS, 0xc000); - - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_ABL, 0x0003); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_LWR, 0x0058); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_LWR, 0x0048); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_UPR, 0); - - CHECK_REG_PCS(NPCM_PCS_VR_MII_MMD_DIG_CTRL1, 0x2400); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_INTR_STS, 0x000a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_TC, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DBG_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL0, 0x899c); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_TXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_RXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_LINK_TIMER_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_STS, 0x0010); - CHECK_REG_PCS(NPCM_PCS_VR_MII_ICG_ERRCNT1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MISC_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_RX_LSTS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_BSTCTRL0, 0x00a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_LVLCTRL0, 0x007f); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL0, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL1, 0x1100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_LOS_CTRL0, 0x000e); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL1, 0x0032); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_STS, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_LVL_CTRL, 0x0019); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL0, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_ERRCNT_SEL, 0); - } - qtest_quit(qts); } diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_sdhci-test', 'npcm7xx_smbus-test', 'npcm7xx_timer-test', - 'npcm7xx_watchdog_timer-test'] + \ + 'npcm7xx_watchdog_timer-test', + 'npcm_gmac-test'] + \ (slirp.found() ? ['npcm7xx_emc-test'] : []) qtests_aspeed = \ ['aspeed_hace-test', -- 2.34.1 From: Luc Michel <luc.michel@amd.com> An access fault is raised when the Access Flag is not set in the looked-up PTE and the AFFD field is not set in the corresponding context descriptor. This was already implemented for stage 2. Implement it for stage 1 as well. Signed-off-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240213082211.3330400-1-luc.michel@amd.com [PMM: tweaked comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + hw/arm/smmu-common.c | 11 +++++++++++ hw/arm/smmuv3.c | 1 + 4 files changed, 14 insertions(+) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ static inline int pa_range(STE *ste) #define CD_EPD(x, sel) extract32((x)->word[0], (16 * (sel)) + 14, 1) #define CD_ENDI(x) extract32((x)->word[0], 15, 1) #define CD_IPS(x) extract32((x)->word[1], 0 , 3) +#define CD_AFFD(x) extract32((x)->word[1], 3 , 1) #define CD_TBI(x) extract32((x)->word[1], 6 , 2) #define CD_HD(x) extract32((x)->word[1], 10 , 1) #define CD_HA(x) extract32((x)->word[1], 11 , 1) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUTransCfg { bool disabled; /* smmu is disabled */ bool bypassed; /* translation is bypassed */ bool aborted; /* translation is aborted */ + bool affd; /* AF fault disable */ uint32_t iotlb_hits; /* counts IOTLB hits */ uint32_t iotlb_misses; /* counts IOTLB misses*/ /* Used by stage-1 only. */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static int smmu_ptw_64_s1(SMMUTransCfg *cfg, pte_addr, pte, iova, gpa, block_size >> 20); } + + /* + * QEMU does not currently implement HTTU, so if AFFD and PTE.AF + * are 0 we take an Access flag fault. (5.4. Context Descriptor) + * An Access flag fault takes priority over a Permission fault. + */ + if (!PTE_AF(pte) && !cfg->affd) { + info->type = SMMU_PTW_ERR_ACCESS; + goto error; + } + ap = PTE_AP(pte); if (is_permission_fault(ap, perm)) { info->type = SMMU_PTW_ERR_PERMISSION; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static int decode_cd(SMMUTransCfg *cfg, CD *cd, SMMUEventInfo *event) cfg->oas = MIN(oas2bits(SMMU_IDR5_OAS), cfg->oas); cfg->tbi = CD_TBI(cd); cfg->asid = CD_ASID(cd); + cfg->affd = CD_AFFD(cd); trace_smmuv3_decode_cd(cfg->oas); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(StellarisADCState *s) +static void stellaris_adc_reset_hold(Object *obj) { + StellarisADCState *s = STELLARIS_ADC(obj); int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_adc_ops, s, "adc", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - stellaris_adc_reset(s); qdev_init_gpio_in(dev, stellaris_adc_trigger, 1); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_i2c_info = { static void stellaris_adc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.hold = stellaris_adc_reset_hold; dc->vmsd = &vmstate_stellaris_adc; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240213155214.13619-3-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -/* I2C controller. */ +/* + * I2C controller. + * ??? For now we only implement the master interface. + */ #define TYPE_STELLARIS_I2C "stellaris-i2c" OBJECT_DECLARE_SIMPLE_TYPE(stellaris_i2c_state, STELLARIS_I2C) @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset, stellaris_i2c_update(s); } -static void stellaris_i2c_reset(stellaris_i2c_state *s) +static void stellaris_i2c_reset_enter(Object *obj, ResetType type) { + stellaris_i2c_state *s = STELLARIS_I2C(obj); + if (s->mcs & STELLARIS_I2C_MCS_BUSBSY) i2c_end_transfer(s->bus); +} + +static void stellaris_i2c_reset_hold(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); s->msa = 0; s->mcs = 0; @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset(stellaris_i2c_state *s) s->mimr = 0; s->mris = 0; s->mcr = 0; +} + +static void stellaris_i2c_reset_exit(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); + stellaris_i2c_update(s); } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_i2c_ops, s, "i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - /* ??? For now we only implement the master interface. */ - stellaris_i2c_reset(s); } /* Analogue to Digital Converter. This is only partially implemented, @@ -XXX,XX +XXX,XX @@ type_init(stellaris_machine_init) static void stellaris_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = stellaris_i2c_reset_enter; + rc->phases.hold = stellaris_i2c_reset_hold; + rc->phases.exit = stellaris_i2c_reset_exit; dc->vmsd = &vmstate_stellaris_i2c; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). This commit plug the devices which aren't part of the SoC; they will be plugged into a SoC container in the next one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) &error_fatal); ssddev = qdev_new("ssd0323"); + object_property_add_child(OBJECT(ms), "oled", OBJECT(ssddev)); qdev_prop_set_uint8(ssddev, "cs", 1); qdev_realize_and_unref(ssddev, bus, &error_fatal); gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(ms), "splitter", + OBJECT(gpio_d_splitter)); qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2); qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal); qdev_connect_gpio_out( @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *gpad; gpad = qdev_new(TYPE_STELLARIS_GAMEPAD); + object_property_add_child(OBJECT(ms), "gamepad", OBJECT(gpad)); for (i = 0; i < ARRAY_SIZE(gpad_keycode); i++) { qlist_append_int(gpad_keycode_list, gpad_keycode[i]); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). Since we don't model the SoC, just use a QOM container. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * 400fe000 system control */ + Object *soc_container; DeviceState *gpio_dev[7], *nvic; qemu_irq gpio_in[7][8]; qemu_irq gpio_out[7][8]; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024; sram_size = ((board->dc0 >> 18) + 1) * 1024; + soc_container = object_new("container"); + object_property_add_child(OBJECT(ms), "soc", soc_container); + /* Flash programming is done via the SCU, so pretend it is ROM. */ memory_region_init_rom(flash, NULL, "stellaris.flash", flash_size, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * need its sysclk output. */ ssys_dev = qdev_new(TYPE_STELLARIS_SYS); + object_property_add_child(soc_container, "sys", OBJECT(ssys_dev)); /* * Most devices come preprogrammed with a MAC address in the user data. @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) sysbus_realize_and_unref(SYS_BUS_DEVICE(ssys_dev), &error_fatal); nvic = qdev_new(TYPE_ARMV7M); + object_property_add_child(soc_container, "v7m", OBJECT(nvic)); qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES); qdev_prop_set_uint8(nvic, "num-prio-bits", NUM_PRIO_BITS); qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) dev = qdev_new(TYPE_STELLARIS_GPTM); sbd = SYS_BUS_DEVICE(dev); + object_property_add_child(soc_container, "gptm[*]", OBJECT(dev)); qdev_connect_clock_in(dev, "clk", qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - + object_property_add_child(soc_container, "wdg", OBJECT(dev)); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) SysBusDevice *sbd; dev = qdev_new("pl011_luminary"); + object_property_add_child(soc_container, "uart[*]", OBJECT(dev)); sbd = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(i)); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *enet; enet = qdev_new("stellaris_enet"); + object_property_add_child(soc_container, "enet", OBJECT(enet)); if (nd) { qdev_set_nic_properties(enet, nd); } else { -- 2.34.1 We support two different encodings for the AArch32 IMPDEF CBAR register -- older cores like the Cortex A9, A7, A15 have this at 4, c15, c0, 0; newer cores like the Cortex A35, A53, A57 and A72 have it at 1 c15 c0 0. When we implemented this we picked which encoding to use based on whether the CPU set ARM_FEATURE_AARCH64. However this isn't right for three cases: * the qemu-system-arm 'max' CPU, which is supposed to be a variant on a Cortex-A57; it ought to use the same encoding the A57 does and which the AArch64 'max' exposes to AArch32 guest code * the Cortex-R52, which is AArch32-only but has the CBAR at the newer encoding (and where we incorrectly are not yet setting ARM_FEATURE_CBAR_RO anyway) * any possible future support for other v8 AArch32 only CPUs, or for supporting "boot the CPU into AArch32 mode" on our existing cores like the A57 etc Make the decision of the encoding be based on whether the CPU implements the ARM_FEATURE_V8 flag instead. This changes the behaviour only for the qemu-system-arm '-cpu max'. We don't expect anybody to be relying on the old behaviour because: * it's not what the real hardware Cortex-A57 does (and that's what our ID register claims we are) * we don't implement the memory-mapped GICv3 support which is the only thing that exists at the peripheral base address pointed to by the register Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-2-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * AArch64 cores we might need to add a specific feature flag * to indicate cores with "flavour 2" CBAR. */ - if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (arm_feature(env, ARM_FEATURE_V8)) { /* 32 bit view is [31:18] 0...0 [43:32]. */ uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18) | extract64(cpu->reset_cbar, 32, 12); -- 2.34.1 The Cortex-R52 implements the Configuration Base Address Register (CBAR), as a read-only register. Add ARM_FEATURE_CBAR_RO to this CPU type, so that our implementation provides the register and the associated qdev property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-3-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_PMSA); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; -- 2.34.1 Add the Cortex-R52 IMPDEF sysregs, by defining them here and also by enabling the AUXCR feature which defines the ACTLR and HACTLR registers. As is our usual practice, we make these simple reads-as-zero stubs for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-4-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 108 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) define_arm_cp_regs(cpu, cortexr5_cp_reginfo); } +static const ARMCPRegInfo cortex_r52_cp_reginfo[] = { + { .name = "CPUACTLR", .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "IMP_ATCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CSCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BPCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_MEMPROTCLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_SLAVEPCTLR", + .cp = 15, .opc1 = 0, .crn = 11, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PERIPHREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHIFREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUILDOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PINOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_QOSR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUSTIMEOUTR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_INTMONR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 4, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CDBGDR0", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CBDGBR1", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR0", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR1", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCI", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 15, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, +}; + + static void cortex_r52_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_AUXCR); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) cpu->pmsav7_dregion = 16; cpu->pmsav8r_hdregion = 16; + + define_arm_cp_regs(cpu, cortex_r52_cp_reginfo); } static void cortex_r5f_initfn(Object *obj) -- 2.34.1 Architecturally, the AArch32 MSR/MRS to/from banked register instructions are UNPREDICTABLE for attempts to access a banked register that the guest could access in a more direct way (e.g. using this insn to access r8_fiq when already in FIQ mode). QEMU has chosen to UNDEF on all of these. However, for the case of accessing SPSR_hyp from hyp mode, it turns out that real hardware permits this, with the same effect as if the guest had directly written to SPSR. Further, there is some guest code out there that assumes it can do this, because it happens to work on hardware: an example Cortex-R52 startup code fragment uses this, and it got copied into various other places, including Zephyr. Zephyr was fixed to not use this: https://github.com/zephyrproject-rtos/zephyr/issues/47330 but other examples are still out there, like the selftest binary for the MPS3-AN536. For convenience of being able to run guest code, permit this UNPREDICTABLE access instead of UNDEFing it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-5-peter.maydell@linaro.org --- target/arm/tcg/op_helper.c | 43 ++++++++++++++++++++++++++------------ target/arm/tcg/translate.c | 19 +++++++++++------ 2 files changed, 43 insertions(+), 19 deletions(-) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, */ int curmode = env->uncached_cpsr & CPSR_M; - if (regno == 17) { - /* ELR_Hyp: a special case because access from tgtmode is OK */ - if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { - goto undef; + if (tgtmode == ARM_CPU_MODE_HYP) { + /* + * Handle Hyp target regs first because some are special cases + * which don't want the usual "not accessible from tgtmode" check. + */ + switch (regno) { + case 16 ... 17: /* ELR_Hyp, SPSR_Hyp */ + if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + case 13: + if (curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + default: + g_assert_not_reached(); } return; } @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, } } - if (tgtmode == ARM_CPU_MODE_HYP) { - /* SPSR_Hyp, r13_hyp: accessible from Monitor mode only */ - if (curmode != ARM_CPU_MODE_MON) { - goto undef; - } - } - return; undef: @@ -XXX,XX +XXX,XX @@ void HELPER(msr_banked)(CPUARMState *env, uint32_t value, uint32_t tgtmode, switch (regno) { case 16: /* SPSRs */ - env->banked_spsr[bank_number(tgtmode)] = value; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + env->spsr = value; + } else { + env->banked_spsr[bank_number(tgtmode)] = value; + } break; case 17: /* ELR_Hyp */ env->elr_el[2] = value; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(mrs_banked)(CPUARMState *env, uint32_t tgtmode, uint32_t regno) switch (regno) { case 16: /* SPSRs */ - return env->banked_spsr[bank_number(tgtmode)]; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + return env->spsr; + } else { + return env->banked_spsr[bank_number(tgtmode)]; + } case 17: /* ELR_Hyp */ return env->elr_el[2]; case 13: diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, break; case ARM_CPU_MODE_HYP: /* - * SPSR_hyp and r13_hyp can only be accessed from Monitor mode - * (and so we can forbid accesses from EL2 or below). elr_hyp - * can be accessed also from Hyp mode, so forbid accesses from - * EL0 or EL1. + * r13_hyp can only be accessed from Monitor mode, and so we + * can forbid accesses from EL2 or below. + * elr_hyp can be accessed also from Hyp mode, so forbid + * accesses from EL0 or EL1. + * SPSR_hyp is supposed to be in the same category as r13_hyp + * and UNPREDICTABLE if accessed from anything except Monitor + * mode. However there is some real-world code that will do + * it because at least some hardware happens to permit the + * access. (Notably a standard Cortex-R52 startup code fragment + * does this.) So we permit SPSR_hyp from Hyp mode also, to allow + * this (incorrect) guest code to run. */ - if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 || - (s->current_el < 3 && *regno != 17)) { + if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 + || (s->current_el < 3 && *regno != 16 && *regno != 17)) { goto undef; } break; -- 2.34.1 We currently guard the CFG3 register read with (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) which is clearly wrong as it is never true. This register is present on all board types except AN524 and AN527; correct the condition. Fixes: 6ac80818941829c0 ("hw/misc/mps2-scc: Implement changes for AN547") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-6-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) { + if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { /* CFG3 reserved on AN524 */ goto bad_offset; } -- 2.34.1 The MPS SCC device has a lot of different flavours for the various different MPS FPGA images, which look mostly similar but have differences in how particular registers are handled. Currently we deal with this with a lot of open-coded checks on scc_partno(), but as we add more board types this is getting a bit hard to read. Factor out the conditions into some functions which we can give more descriptive names to. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-7-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) return extract32(s->id, 4, 8); } +/* Is CFG_REG2 present? */ +static bool have_cfg2(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG3 present? */ +static bool have_cfg3(MPS2SCC *s) +{ + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; +} + +/* Is CFG_REG5 present? */ +static bool have_cfg5(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG6 present? */ +static bool have_cfg6(MPS2SCC *s) +{ + return scc_partno(s) == 0x524; +} + /* Handle a write via the SYS_CFG channel to the specified function/device. * Return false on error (reported to guest via SYS_CFGCTRL ERROR bit). */ @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg1; break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { - /* CFG3 reserved on AN524 */ + if (!have_cfg3(s)) { goto bad_offset; } /* These are user-settable DIP switches on the board. We don't @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg4; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } r = s->cfg5; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } r = s->cfg6; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, } break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } /* AN524: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } /* AN524: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } /* AN524: Clock divider for BRAM */ -- 2.34.1 The MPS2 SCC device is broadly the same for all FPGA images, but has minor differences in the behaviour of the CFG registers depending on the image. In many cases we don't really care about the functionality controlled by these registers and a reads-as-written or similar behaviour is sufficient for the moment. For the AN536 the required behaviour is: * A_CFG0 has CPU reset and halt bits - implement as reads-as-written for the moment * A_CFG1 has flash or ATCM address 0 remap handling - QEMU doesn't model this; implement as reads-as-written * A_CFG2 has QSPI select (like AN524) - implemented (no behaviour, as with AN524) * A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits" - QEMU doesn't care about these, so use the existing RAZ behaviour for convenience * A_CFG4 is board rev (like all other images) - no change needed * A_CFG5 is ACLK frq in hz (like AN524) - implemented as reads-as-written, as for other boards * A_CFG6 is core 0 vector table base address - implemented as reads-as-written for the moment * A_CFG7 is core 1 vector table base address - implemented as reads-as-written for the moment Make the changes necessary for this; leave TODO comments where appropriate to indicate where we might want to come back and implement things like CPU reset. The other aspects of the device specific to this FPGA image (like the values of the board ID and similar registers) will be set via the device's qdev properties. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-8-peter.maydell@linaro.org --- include/hw/misc/mps2-scc.h | 1 + hw/misc/mps2-scc.c | 101 +++++++++++++++++++++++++++++++++---- 2 files changed, 92 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/mps2-scc.h b/include/hw/misc/mps2-scc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mps2-scc.h +++ b/include/hw/misc/mps2-scc.h @@ -XXX,XX +XXX,XX @@ struct MPS2SCC { uint32_t cfg4; uint32_t cfg5; uint32_t cfg6; + uint32_t cfg7; uint32_t cfgdata_rtn; uint32_t cfgdata_out; uint32_t cfgctrl; diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ REG32(CFG3, 0xc) REG32(CFG4, 0x10) REG32(CFG5, 0x14) REG32(CFG6, 0x18) +REG32(CFG7, 0x1c) REG32(CFGDATA_RTN, 0xa0) REG32(CFGDATA_OUT, 0xa4) REG32(CFGCTRL, 0xa8) @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) /* Is CFG_REG2 present? */ static bool have_cfg2(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG3 present? */ static bool have_cfg3(MPS2SCC *s) { - return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547 && + scc_partno(s) != 0x536; } /* Is CFG_REG5 present? */ static bool have_cfg5(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG6 present? */ static bool have_cfg6(MPS2SCC *s) { - return scc_partno(s) == 0x524; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x536; +} + +/* Is CFG_REG7 present? */ +static bool have_cfg7(MPS2SCC *s) +{ + return scc_partno(s) == 0x536; +} + +/* Does CFG_REG0 drive the 'remap' GPIO output? */ +static bool cfg0_is_remap(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; +} + +/* Is CFG_REG1 driving a set of LEDs? */ +static bool cfg1_is_leds(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; } /* Handle a write via the SYS_CFG channel to the specified function/device. @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) if (!have_cfg3(s)) { goto bad_offset; } - /* These are user-settable DIP switches on the board. We don't + /* + * These are user-settable DIP switches on the board. We don't * model that, so just return zeroes. + * + * TODO: for AN536 this is MCC_MSB_ADDR "additional MCC addressing + * bits". These change which part of the DDR4 the motherboard + * configuration controller can see in its memory map (see the + * appnote section 2.4). QEMU doesn't model the MCC at all, so these + * bits are not interesting to us; read-as-zero is as good as anything + * else. */ r = 0; break; @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) } r = s->cfg6; break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + r = s->cfg7; + break; case A_CFGDATA_RTN: r = s->cfgdata_rtn; break; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, * we always reflect bit 0 in the 'remap' GPIO output line, * and let the board wire it up or not as it chooses. * TODO on some boards bit 1 is CPU_WAIT. + * + * TODO: on the AN536 this register controls reset and halt + * for both CPUs. For the moment we don't implement this, so the + * register just reads as written. */ s->cfg0 = value; - qemu_set_irq(s->remap, s->cfg0 & 1); + if (cfg0_is_remap(s)) { + qemu_set_irq(s->remap, s->cfg0 & 1); + } break; case A_CFG1: s->cfg1 = value; - for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { - led_set_state(s->led[i], extract32(value, i, 1)); + /* + * On most boards this register drives LEDs. + * + * TODO: for AN536 this controls whether flash and ATCM are + * enabled or disabled on reset. QEMU doesn't model this, and + * always wires up RAM in the ATCM area and ROM in the flash area. + */ + if (cfg1_is_leds(s)) { + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { + led_set_state(s->led[i], extract32(value, i, 1)); + } } break; case A_CFG2: if (!have_cfg2(s)) { goto bad_offset; } - /* AN524: QSPI Select signal */ + /* AN524, AN536: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: if (!have_cfg5(s)) { goto bad_offset; } - /* AN524: ACLK frequency in Hz */ + /* AN524, AN536: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, goto bad_offset; } /* AN524: Clock divider for BRAM */ + /* AN536: Core 0 vector table base address */ + s->cfg6 = value; + break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + /* AN536: Core 1 vector table base address */ s->cfg6 = value; break; case A_CFGDATA_OUT: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_finalize(Object *obj) g_free(s->oscclk_reset); } +static bool cfg7_needed(void *opaque) +{ + MPS2SCC *s = opaque; + + return have_cfg7(s); +} + +static const VMStateDescription vmstate_cfg7 = { + .name = "mps2-scc/cfg7", + .version_id = 1, + .minimum_version_id = 1, + .needed = cfg7_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(cfg7, MPS2SCC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription mps2_scc_vmstate = { .name = "mps2-scc", .version_id = 3, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription mps2_scc_vmstate = { VMSTATE_VARRAY_UINT32(oscclk, MPS2SCC, num_oscclk, 0, vmstate_info_uint32, uint32_t), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * const []) { + &vmstate_cfg7, + NULL } }; -- 2.34.1 The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org --- MAINTAINERS | 3 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/mps3r.c | 239 ++++++++++++++++++++++++ hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + 5 files changed, 248 insertions(+), 1 deletion(-) create mode 100644 hw/arm/mps3r.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/misc/imx7_*.h F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h -MPS2 +MPS2 / MPS3 M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/mps2.c F: hw/arm/mps2-tz.c +F: hw/arm/mps3r.c F: hw/misc/mps2-*.c F: include/hw/misc/mps2-*.h F: hw/arm/armsse.c diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM_VIRT=y # CONFIG_INTEGRATOR=n # CONFIG_FSL_IMX31=n # CONFIG_MUSICPAL=n +# CONFIG_MPS3R=n # CONFIG_MUSCA=n # CONFIG_CHEETAH=n # CONFIG_SX1=n diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm MPS3 board emulation for Cortex-R-based FPGA images. + * (For M-profile images see mps2.c and mps2tz.c.) + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * The MPS3 is an FPGA based dev board. This file handles FPGA images + * which use the Cortex-R CPUs. We model these separately from the + * M-profile images, because on M-profile the FPGA image is based on + * a "Subsystem for Embedded" which is similar to an SoC, whereas + * the R-profile FPGA images don't have that abstraction layer. + * + * We model the following FPGA images here: + * "mps3-an536" -- dual Cortex-R52 as documented in Arm Application Note AN536 + * + * Application Note AN536: + * https://developer.arm.com/documentation/dai0536/latest/ + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "exec/address-spaces.h" +#include "cpu.h" +#include "hw/boards.h" +#include "hw/arm/boot.h" + +/* Define the layout of RAM and ROM in a board */ +typedef struct RAMInfo { + const char *name; + hwaddr base; + hwaddr size; + int mrindex; /* index into rams[]; -1 for the system RAM block */ + int flags; +} RAMInfo; + +/* + * The MPS3 DDR is 3GiB, but on a 32-bit host QEMU doesn't permit + * emulation of that much guest RAM, so artificially make it smaller. + */ +#if HOST_LONG_BITS == 32 +#define MPS3_DDR_SIZE (1 * GiB) +#else +#define MPS3_DDR_SIZE (3 * GiB) +#endif + +/* + * Flag values: + * IS_MAIN: this is the main machine RAM + * IS_ROM: this area is read-only + */ +#define IS_MAIN 1 +#define IS_ROM 2 + +#define MPS3R_RAM_MAX 9 + +typedef enum MPS3RFPGAType { + FPGA_AN536, +} MPS3RFPGAType; + +struct MPS3RMachineClass { + MachineClass parent; + MPS3RFPGAType fpga_type; + const RAMInfo *raminfo; +}; + +struct MPS3RMachineState { + MachineState parent; + MemoryRegion ram[MPS3R_RAM_MAX]; +}; + +#define TYPE_MPS3R_MACHINE "mps3r" +#define TYPE_MPS3R_AN536_MACHINE MACHINE_TYPE_NAME("mps3-an536") + +OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) + +static const RAMInfo an536_raminfo[] = { + { + .name = "ATCM", + .base = 0x00000000, + .size = 0x00008000, + .mrindex = 0, + }, { + /* We model the QSPI flash as simple ROM for now */ + .name = "QSPI", + .base = 0x08000000, + .size = 0x00800000, + .flags = IS_ROM, + .mrindex = 1, + }, { + .name = "BRAM", + .base = 0x10000000, + .size = 0x00080000, + .mrindex = 2, + }, { + .name = "DDR", + .base = 0x20000000, + .size = MPS3_DDR_SIZE, + .mrindex = -1, + }, { + .name = "ATCM0", + .base = 0xee000000, + .size = 0x00008000, + .mrindex = 3, + }, { + .name = "BTCM0", + .base = 0xee100000, + .size = 0x00008000, + .mrindex = 4, + }, { + .name = "CTCM0", + .base = 0xee200000, + .size = 0x00008000, + .mrindex = 5, + }, { + .name = "ATCM1", + .base = 0xee400000, + .size = 0x00008000, + .mrindex = 6, + }, { + .name = "BTCM1", + .base = 0xee500000, + .size = 0x00008000, + .mrindex = 7, + }, { + .name = "CTCM1", + .base = 0xee600000, + .size = 0x00008000, + .mrindex = 8, + }, { + .name = NULL, + } +}; + +static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, + const RAMInfo *raminfo) +{ + /* Return an initialized MemoryRegion for the RAMInfo. */ + MemoryRegion *ram; + + if (raminfo->mrindex < 0) { + /* Means this RAMInfo is for QEMU's "system memory" */ + MachineState *machine = MACHINE(mms); + assert(!(raminfo->flags & IS_ROM)); + return machine->ram; + } + + assert(raminfo->mrindex < MPS3R_RAM_MAX); + ram = &mms->ram[raminfo->mrindex]; + + memory_region_init_ram(ram, NULL, raminfo->name, + raminfo->size, &error_fatal); + if (raminfo->flags & IS_ROM) { + memory_region_set_readonly(ram, true); + } + return ram; +} + +static void mps3r_common_init(MachineState *machine) +{ + MPS3RMachineState *mms = MPS3R_MACHINE(machine); + MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); + MemoryRegion *sysmem = get_system_memory(); + + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { + MemoryRegion *mr = mr_for_raminfo(mms, ri); + memory_region_add_subregion(sysmem, ri->base, mr); + } +} + +static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) +{ + /* + * Set mc->default_ram_size and default_ram_id from the + * information in mmc->raminfo. + */ + MachineClass *mc = MACHINE_CLASS(mmc); + const RAMInfo *p; + + for (p = mmc->raminfo; p->name; p++) { + if (p->mrindex < 0) { + /* Found the entry for "system memory" */ + mc->default_ram_size = p->size; + mc->default_ram_id = p->name; + return; + } + } + g_assert_not_reached(); +} + +static void mps3r_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps3r_common_init; +} + +static void mps3r_an536_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS3RMachineClass *mmc = MPS3R_MACHINE_CLASS(oc); + static const char * const valid_cpu_types[] = { + ARM_CPU_TYPE_NAME("cortex-r52"), + NULL + }; + + mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; + mc->default_cpus = 2; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); + mc->valid_cpu_types = valid_cpu_types; + mmc->raminfo = an536_raminfo; + mps3r_set_default_ram_info(mmc); +} + +static const TypeInfo mps3r_machine_types[] = { + { + .name = TYPE_MPS3R_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS3RMachineState), + .class_size = sizeof(MPS3RMachineClass), + .class_init = mps3r_class_init, + }, { + .name = TYPE_MPS3R_AN536_MACHINE, + .parent = TYPE_MPS3R_MACHINE, + .class_init = mps3r_an536_class_init, + }, +}; + +DEFINE_TYPES(mps3r_machine_types); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MAINSTONE select PFLASH_CFI01 select SMC91C111 +config MPS3R + bool + default y + depends on TCG && ARM + config MUSCA bool default y diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c')) arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c')) arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c')) arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) +arm_ss.add(when: 'CONFIG_MPS3R', if_true: files('mps3r.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) -- 2.34.1 Create the CPUs, the GIC, and the per-CPU RAM block for the mps3-an536 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240206132931.38376-10-peter.maydell@linaro.org --- hw/arm/mps3r.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 177 insertions(+), 3 deletions(-) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "qapi/error.h" +#include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" #include "hw/boards.h" +#include "hw/qdev-properties.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" +#include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define IS_ROM 2 #define MPS3R_RAM_MAX 9 +#define MPS3R_CPU_MAX 2 + +#define PERIPHBASE 0xf0000000 +#define NUM_SPIS 96 typedef enum MPS3RFPGAType { FPGA_AN536, @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineClass { MachineClass parent; MPS3RFPGAType fpga_type; const RAMInfo *raminfo; + hwaddr loader_start; }; struct MPS3RMachineState { MachineState parent; + struct arm_boot_info bootinfo; MemoryRegion ram[MPS3R_RAM_MAX]; + Object *cpu[MPS3R_CPU_MAX]; + MemoryRegion cpu_sysmem[MPS3R_CPU_MAX]; + MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; + MemoryRegion cpu_ram[MPS3R_CPU_MAX]; + GICv3State gic; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, return ram; } +/* + * There is no defined secondary boot protocol for Linux for the AN536, + * because real hardware has a restriction that atomic operations between + * the two CPUs do not function correctly, and so true SMP is not + * possible. Therefore for cases where the user is directly booting + * a kernel, we treat the system as essentially uniprocessor, and + * put the secondary CPU into power-off state (as if the user on the + * real hardware had configured the secondary to be halted via the + * SCC config registers). + * + * Note that the default secondary boot code would not work here anyway + * as it assumes a GICv2, and we have a GICv3. + */ +static void mps3r_write_secondary_boot(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* + * Power the secondary CPU off. This means we don't need to write any + * boot code into guest memory. Note that the 'cpu' argument to this + * function is the primary CPU we passed to arm_load_kernel(), not + * the secondary. Loop around all the other CPUs, as the boot.c + * code does for the "disable secondaries if PSCI is enabled" case. + */ + for (CPUState *cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + if (cs != first_cpu) { + object_property_set_bool(OBJECT(cs), "start-powered-off", true, + &error_abort); + } + } +} + +static void mps3r_secondary_cpu_reset(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* We don't need to do anything here because the CPU will be off */ +} + +static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) +{ + MachineState *machine = MACHINE(mms); + DeviceState *gicdev; + QList *redist_region_count; + + object_initialize_child(OBJECT(mms), "gic", &mms->gic, TYPE_ARM_GICV3); + gicdev = DEVICE(&mms->gic); + qdev_prop_set_uint32(gicdev, "num-cpu", machine->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", NUM_SPIS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, machine->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&mms->gic), "sysmem", + OBJECT(sysmem), &error_fatal); + sysbus_realize(SYS_BUS_DEVICE(&mms->gic), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 0, PERIPHBASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 1, PERIPHBASE + 0x100000); + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (int i = 0; i < machine->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(mms->cpu[i]); + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&mms->gic); + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. This isn't a BSA board, + * but it uses the standard convention for the PPI numbers. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + }; + + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(gicdev, + intidbase + timer_irq[irq])); + } + + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + ARCH_GIC_MAINT_IRQ)); + + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + VIRTUAL_PMU_IRQ)); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); } + + assert(machine->smp.cpus <= MPS3R_CPU_MAX); + for (int i = 0; i < machine->smp.cpus; i++) { + g_autofree char *sysmem_name = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *ramname = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *alias_name = g_strdup_printf("sysmem-alias-%d", i); + + /* + * Each CPU has some private RAM/peripherals, so create the container + * which will house those, with the whole-machine system memory being + * used where there's no CPU-specific device. Note that we need the + * sysmem_alias aliases because we can't put one MR (the original + * 'sysmem') into more than one other MR. + */ + memory_region_init(&mms->cpu_sysmem[i], OBJECT(machine), + sysmem_name, UINT64_MAX); + memory_region_init_alias(&mms->sysmem_alias[i], OBJECT(machine), + alias_name, sysmem, 0, UINT64_MAX); + memory_region_add_subregion_overlap(&mms->cpu_sysmem[i], 0, + &mms->sysmem_alias[i], -1); + + mms->cpu[i] = object_new(machine->cpu_type); + object_property_set_link(mms->cpu[i], "memory", + OBJECT(&mms->cpu_sysmem[i]), &error_abort); + object_property_set_int(mms->cpu[i], "reset-cbar", + PERIPHBASE, &error_abort); + qdev_realize(DEVICE(mms->cpu[i]), NULL, &error_fatal); + object_unref(mms->cpu[i]); + + /* Per-CPU RAM */ + memory_region_init_ram(&mms->cpu_ram[i], NULL, ramname, + 0x1000, &error_fatal); + memory_region_add_subregion(&mms->cpu_sysmem[i], 0xe7c01000, + &mms->cpu_ram[i]); + } + + create_gic(mms, sysmem); + + mms->bootinfo.ram_size = machine->ram_size; + mms->bootinfo.board_id = -1; + mms->bootinfo.loader_start = mmc->loader_start; + mms->bootinfo.write_secondary_boot = mps3r_write_secondary_boot; + mms->bootinfo.secondary_cpu_reset_hook = mps3r_secondary_cpu_reset; + arm_load_kernel(ARM_CPU(mms->cpu[0]), machine, &mms->bootinfo); } static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) /* Found the entry for "system memory" */ mc->default_ram_size = p->size; mc->default_ram_id = p->name; + mmc->loader_start = p->base; return; } } @@ -XXX,XX +XXX,XX @@ static void mps3r_an536_class_init(ObjectClass *oc, void *data) }; mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; - mc->default_cpus = 2; - mc->min_cpus = mc->default_cpus; - mc->max_cpus = mc->default_cpus; + /* + * In the real FPGA image there are always two cores, but the standard + * initial setting for the SCC SYSCON 0x000 register is 0x21, meaning + * that the second core is held in reset and halted. Many images built for + * the board do not expect the second core to run at startup (especially + * since on the real FPGA image it is not possible to use LDREX/STREX + * in RAM between the two cores, so a true SMP setup isn't supported). + * + * As QEMU's equivalent of this, we support both -smp 1 and -smp 2, + * with the default being -smp 1. This seems a more intuitive UI for + * QEMU users than, for instance, having a machine property to allow + * the user to set the initial value of the SYSCON 0x000 register. + */ + mc->default_cpus = 1; + mc->min_cpus = 1; + mc->max_cpus = 2; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); mc->valid_cpu_types = valid_cpu_types; mmc->raminfo = an536_raminfo; -- 2.34.1 This board has a lot of UARTs: there is one UART per CPU in the per-CPU peripheral part of the address map, whose interrupts are connected as per-CPU interrupt lines. Then there are 4 UARTs in the normal part of the peripheral space, whose interrupts are shared peripheral interrupts. Connect and wire them all up; this involves some OR gates where multiple overflow interrupts are wired into one GIC input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-11-peter.maydell@linaro.org --- hw/arm/mps3r.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/boards.h" +#include "hw/or-irq.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" +#include "hw/char/cmsdk-apb-uart.h" #include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define MPS3R_RAM_MAX 9 #define MPS3R_CPU_MAX 2 +#define MPS3R_UART_MAX 4 /* shared UART count */ #define PERIPHBASE 0xf0000000 #define NUM_SPIS 96 @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; MemoryRegion cpu_ram[MPS3R_CPU_MAX]; GICv3State gic; + /* per-CPU UARTs followed by the shared UARTs */ + CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; + OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; + OrIRQState uart_oflow; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) +/* + * Main clock frequency CLK in Hz (50MHz). In the image there are also + * ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our + * model we just roll them all into one. + */ +#define CLK_FRQ 50000000 + static const RAMInfo an536_raminfo[] = { { .name = "ATCM", @@ -XXX,XX +XXX,XX @@ static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) } } +/* + * Create UART uartno, and map it into the MemoryRegion mem at address baseaddr. + * The qemu_irq arguments are where we connect the various IRQs from the UART. + */ +static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem, + hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq, + qemu_irq txoverirq, qemu_irq rxoverirq, + qemu_irq combirq) +{ + g_autofree char *s = g_strdup_printf("uart%d", uartno); + SysBusDevice *sbd; + + assert(uartno < ARRAY_SIZE(mms->uart)); + object_initialize_child(OBJECT(mms), s, &mms->uart[uartno], + TYPE_CMSDK_APB_UART); + qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ); + qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno)); + sbd = SYS_BUS_DEVICE(&mms->uart[uartno]); + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(mem, baseaddr, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, txirq); + sysbus_connect_irq(sbd, 1, rxirq); + sysbus_connect_irq(sbd, 2, txoverirq); + sysbus_connect_irq(sbd, 3, rxoverirq); + sysbus_connect_irq(sbd, 4, combirq); +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); + DeviceState *gicdev; for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } create_gic(mms, sysmem); + gicdev = DEVICE(&mms->gic); + + /* + * UARTs 0 and 1 are per-CPU; their interrupts are wired to + * the relevant CPU's PPI 0..3, aka INTID 16..19 + */ + for (int i = 0; i < machine->smp.cpus; i++) { + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i); + DeviceState *orgate; + + /* The two overflow IRQs from the UART are ORed together into PPI 3 */ + object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i], + TYPE_OR_IRQ); + orgate = DEVICE(&mms->cpu_uart_oflow[i]); + qdev_prop_set_uint32(orgate, "num-lines", 2); + qdev_realize(orgate, NULL, &error_fatal); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(gicdev, intidbase + 19)); + + create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000, + qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */ + qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */ + qdev_get_gpio_in(orgate, 0), /* txover */ + qdev_get_gpio_in(orgate, 1), /* rxover */ + qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */); + } + /* + * UARTs 2 to 5 are whole-system; all overflow IRQs are ORed + * together into IRQ 17 + */ + object_initialize_child(OBJECT(mms), "uart-oflow-orgate", + &mms->uart_oflow, TYPE_OR_IRQ); + qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines", + MPS3R_UART_MAX * 2); + qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0, + qdev_get_gpio_in(gicdev, 17)); + + for (int i = 0; i < MPS3R_UART_MAX; i++) { + hwaddr baseaddr = 0xe0205000 + i * 0x1000; + int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i; + + create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr, + qdev_get_gpio_in(gicdev, txirq), + qdev_get_gpio_in(gicdev, rxirq), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1), + qdev_get_gpio_in(gicdev, combirq)); + } mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; -- 2.34.1 Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536 board. These are all simple devices that just need to be created and wired up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-12-peter.maydell@linaro.org --- hw/arm/mps3r.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/or-irq.h" +#include "hw/qdev-clock.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" #include "hw/char/cmsdk-apb-uart.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/unimp.h" +#include "hw/timer/cmsdk-apb-dualtimer.h" +#include "hw/watchdog/cmsdk-apb-watchdog.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; OrIRQState uart_oflow; + CMSDKAPBWatchdog watchdog; + CMSDKAPBDualTimer dualtimer; + ArmSbconI2CState i2c[5]; + Clock *clk; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + mms->clk = clock_new(OBJECT(machine), "CLK"); + clock_set_hz(mms->clk, CLK_FRQ); + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) qdev_get_gpio_in(gicdev, combirq)); } + for (int i = 0; i < 4; i++) { + /* CMSDK GPIO controllers */ + g_autofree char *s = g_strdup_printf("gpio%d", i); + create_unimplemented_device(s, 0xe0000000 + i * 0x1000, 0x1000); + } + + object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, + TYPE_CMSDK_APB_WATCHDOG); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, + qdev_get_gpio_in(gicdev, 0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0xe0100000); + + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, + TYPE_CMSDK_APB_DUALTIMER); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, + qdev_get_gpio_in(gicdev, 3)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 1, + qdev_get_gpio_in(gicdev, 1)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 2, + qdev_get_gpio_in(gicdev, 2)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0xe0101000); + + for (int i = 0; i < ARRAY_SIZE(mms->i2c); i++) { + static const hwaddr i2cbase[] = {0xe0102000, /* Touch */ + 0xe0103000, /* Audio */ + 0xe0107000, /* Shield0 */ + 0xe0108000, /* Shield1 */ + 0xe0109000}; /* DDR4 EEPROM */ + g_autofree char *s = g_strdup_printf("i2c%d", i); + + object_initialize_child(OBJECT(mms), s, &mms->i2c[i], + TYPE_ARM_SBCON_I2C); + sysbus_realize(SYS_BUS_DEVICE(&mms->i2c[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->i2c[i]), 0, i2cbase[i]); + if (i != 2 && i != 3) { + /* + * internal-only bus: mark it full to avoid user-created + * i2c devices being plugged into it. + */ + qbus_mark_full(qdev_get_child_bus(DEVICE(&mms->i2c[i]), "i2c")); + } + } + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add the remaining devices (or unimplemented-device stubs) for this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the QSPI write-config block, and ethernet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-13-peter.maydell@linaro.org --- hw/arm/mps3r.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/cmsdk-apb-uart.h" #include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" #include "hw/misc/unimp.h" +#include "hw/net/lan9118.h" +#include "hw/rtc/pl031.h" +#include "hw/ssi/pl022.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBWatchdog watchdog; CMSDKAPBDualTimer dualtimer; ArmSbconI2CState i2c[5]; + PL022State spi[3]; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + UnimplementedDeviceState i2s_audio; + PL031State rtc; Clock *clk; }; @@ -XXX,XX +XXX,XX @@ static const RAMInfo an536_raminfo[] = { } }; +static const int an536_oscclk[] = { + 24000000, /* 24MHz reference for RTC and timers */ + 50000000, /* 50MHz ACLK */ + 50000000, /* 50MHz MCLK */ + 50000000, /* 50MHz GPUCLK */ + 24576000, /* 24.576MHz AUDCLK */ + 23750000, /* 23.75MHz HDLCDCLK */ + 100000000, /* 100MHz DDR4_REF_CLK */ +}; + static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, const RAMInfo *raminfo) { @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + QList *oscclk; mms->clk = clock_new(OBJECT(machine), "CLK"); clock_set_hz(mms->clk, CLK_FRQ); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } } + for (int i = 0; i < ARRAY_SIZE(mms->spi); i++) { + g_autofree char *s = g_strdup_printf("spi%d", i); + hwaddr baseaddr = 0xe0104000 + i * 0x1000; + + object_initialize_child(OBJECT(mms), s, &mms->spi[i], TYPE_PL022); + sysbus_realize(SYS_BUS_DEVICE(&mms->spi[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->spi[i]), 0, baseaddr); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->spi[i]), 0, + qdev_get_gpio_in(gicdev, 22 + i)); + } + + object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg0", 0); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg4", 0x2); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-aid", 0x00200008); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-id", 0x41055360); + oscclk = qlist_new(); + for (int i = 0; i < ARRAY_SIZE(an536_oscclk); i++) { + qlist_append_int(oscclk, an536_oscclk[i]); + } + qdev_prop_set_array(DEVICE(&mms->scc), "oscclk", oscclk); + sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->scc), 0, 0xe0200000); + + create_unimplemented_device("i2s-audio", 0xe0201000, 0x1000); + + object_initialize_child(OBJECT(mms), "fpgaio", &mms->fpgaio, + TYPE_MPS2_FPGAIO); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", an536_oscclk[1]); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "num-leds", 10); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-switches", true); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-dbgctrl", false); + sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0xe0202000); + + create_unimplemented_device("clcd", 0xe0209000, 0x1000); + + object_initialize_child(OBJECT(mms), "rtc", &mms->rtc, TYPE_PL031); + sysbus_realize(SYS_BUS_DEVICE(&mms->rtc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->rtc), 0, 0xe020a000); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->rtc), 0, + qdev_get_gpio_in(gicdev, 4)); + + /* + * In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + */ + lan9118_init(0xe0300000, + qdev_get_gpio_in(gicdev, 18)); + + create_unimplemented_device("usb", 0xe0301000, 0x1000); + create_unimplemented_device("qspi-write-config", 0xe0600000, 0x1000); + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add documentation for the mps3-an536 board type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-14-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/mps2.rst +++ b/docs/system/arm/mps2.rst @@ -XXX,XX +XXX,XX @@ -Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an547``) -========================================================================================================================================================= +Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an536``, ``mps3-an547``) +========================================================================================================================================================================= -These board models all use Arm M-profile CPUs. +These board models use Arm M-profile or R-profile CPUs. The Arm MPS2, MPS2+ and MPS3 dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2; the 3 has a bigger @@ -XXX,XX +XXX,XX @@ FPGA image. QEMU models the following FPGA images: +FPGA images using M-profile CPUs: + ``mps2-an385`` Cortex-M3 as documented in Arm Application Note AN385 ``mps2-an386`` @@ -XXX,XX +XXX,XX @@ QEMU models the following FPGA images: ``mps3-an547`` Cortex-M55 on an MPS3, as documented in Arm Application Note AN547 +FPGA images using R-profile CPUs: + +``mps3-an536`` + Dual Cortex-R52 on an MPS3, as documented in Arm Application Note AN536 + Differences between QEMU and real hardware: - AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to @@ -XXX,XX +XXX,XX @@ Differences between QEMU and real hardware: flash, but only as simple ROM, so attempting to rewrite the flash from the guest will fail - QEMU does not model the USB controller in MPS3 boards +- AN536 does not support runtime control of CPU reset and halt via + the SCC CFG_REG0 register. +- AN536 does not support enabling or disabling the flash and ATCM + interfaces via the SCC CFG_REG1 register. +- AN536 does not support setting of the initial vector table + base address via the SCC CFG_REG6 and CFG_REG7 register config, + and does not provide a mechanism for specifying these values at + startup, so all guest images must be built to start from TCM + (i.e. to expect the interrupt vector base at 0 from reset). +- AN536 defaults to only creating a single CPU; this is the equivalent + of the way the real FPGA image usually runs with the second Cortex-R52 + held in halt via the initial SCC CFG_REG0 register setting. You can + create the second CPU with ``-smp 2``; both CPUs will then start + execution immediately on startup. + +Note that for the AN536 the first UART is accessible only by +CPU0, and the second UART is accessible only by CPU1. The +first UART accessible shared between both CPUs is the third +UART. Guest software might therefore be built to use either +the first UART or the third UART; if you don't see any output +from the UART you are looking at, try one of the others. +(Even if the AN536 machine is started with a single CPU and so +no "CPU1-only UART", the UART numbering remains the same, +with the third UART being the first of the shared ones.) Machine-specific options """""""""""""""""""""""" -- 2.34.1