Nothing earth-shaking in here, just a lot of refactoring and cleanup and a few bugfixes. I suspect I'll have another pullreq to come in the early part of next week... The following changes since commit 19591e9e0938ea5066984553c256a043bd5d822f: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2020-08-27 16:59:02 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200828 for you to fetch changes up to ed78849d9711805bda37ee026018d6ee7a606d0e: target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd (2020-08-28 10:02:50 +0100) ---------------------------------------------------------------- target-arm queue: * target/arm: Cleanup and refactoring preparatory to SVE2 * armsse: Define ARMSSEClass correctly * hw/misc/unimp: Improve information provided in log messages * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers * target/arm: Fill in the WnR syndrome bit in mte_check_fail * target/arm: Clarify HCR_EL2 ARMCPRegInfo type * hw/arm/musicpal: Use AddressSpace for DMA transfers * hw/clock: Minor cleanups * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs ---------------------------------------------------------------- Eduardo Habkost (1): armsse: Define ARMSSEClass correctly Graeme Gregory (1): hw/arm/sbsa-ref: fix typo breaking PCIe IRQs Philippe Mathieu-Daudé (14): hw/clock: Remove unused clock_init*() functions hw/clock: Let clock_set() return boolean value hw/clock: Only propagate clock changes if the clock is changed hw/arm/musicpal: Use AddressSpace for DMA transfers target/arm: Clarify HCR_EL2 ARMCPRegInfo type hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers hw/arm/xilinx_zynq: Uninline cadence_uart_create() hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize hw/qdev-clock: Uninline qdev_connect_clock_in() hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize hw/misc/unimp: Display value after offset hw/misc/unimp: Display the value with width of the access size hw/misc/unimp: Display the offset with width of the region size Richard Henderson (19): target/arm: Pass the entire mte descriptor to mte_check_fail target/arm: Fill in the WnR syndrome bit in mte_check_fail qemu/int128: Add int128_lshift target/arm: Split out gen_gvec_fn_zz target/arm: Split out gen_gvec_fn_zzz, do_zzz_fn target/arm: Rearrange {sve,fp}_check_access assert target/arm: Merge do_vector2_p into do_mov_p target/arm: Clean up 4-operand predicate expansion target/arm: Use tcg_gen_gvec_bitsel for trans_SEL_pppp target/arm: Split out gen_gvec_ool_zzzp target/arm: Merge helper_sve_clr_* and helper_sve_movz_* target/arm: Split out gen_gvec_ool_zzp target/arm: Split out gen_gvec_ool_zzz target/arm: Split out gen_gvec_ool_zz target/arm: Tidy SVE tszimm shift formats target/arm: Generalize inl_qrdmlah_* helper functions target/arm: Convert integer multiply (indexed) to gvec for aa64 advsimd target/arm: Convert integer multiply-add (indexed) to gvec for aa64 advsimd target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd include/hw/arm/armsse.h | 2 +- include/hw/char/cadence_uart.h | 17 -- include/hw/clock.h | 30 +-- include/hw/misc/unimp.h | 1 + include/hw/net/allwinner-sun8i-emac.h | 6 + include/hw/qdev-clock.h | 8 +- include/hw/sd/allwinner-sdhost.h | 6 + include/qemu/int128.h | 16 ++ target/arm/helper-sve.h | 5 - target/arm/helper.h | 28 +++ target/arm/translate.h | 1 + target/arm/sve.decode | 35 ++- hw/arm/allwinner-a10.c | 2 + hw/arm/allwinner-h3.c | 4 + hw/arm/armsse.c | 1 + hw/arm/musicpal.c | 45 ++-- hw/arm/sbsa-ref.c | 2 +- hw/arm/xilinx_zynq.c | 24 +- hw/core/clock.c | 7 +- hw/core/qdev-clock.c | 6 + hw/misc/unimp.c | 14 +- hw/net/allwinner-sun8i-emac.c | 46 ++-- hw/sd/allwinner-sdhost.c | 37 +++- target/arm/helper.c | 1 - target/arm/mte_helper.c | 19 +- target/arm/sve_helper.c | 70 ++---- target/arm/translate-a64.c | 110 ++++++++-- target/arm/translate-sve.c | 399 ++++++++++++++-------------------- target/arm/vec_helper.c | 182 +++++++++++----- 29 files changed, 629 insertions(+), 495 deletions(-) From: Graeme Gregory <graeme@nuviainc.com> Fixing a typo in a previous patch that translated an "i" to a 1 and therefore breaking the allocation of PCIe interrupts. This was discovered when virtio-net-pci devices ceased to function correctly. Cc: qemu-stable@nongnu.org Fixes: 48ba18e6d3f3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state") Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200821083853.356490-1-graeme@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void create_pcie(SBSAMachineState *sms) for (i = 0; i < GPEX_NUM_IRQS; i++) { sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, - qdev_get_gpio_in(sms->gic, irq + 1)); + qdev_get_gpio_in(sms->gic, irq + i)); gpex_set_irq_num(GPEX_HOST(dev), i, irq + i); } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> clock_init*() inlined funtions are simple wrappers around clock_set*() and are not used. Remove them in favor of clock_set*(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200806123858.30058-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ static inline bool clock_is_enabled(const Clock *clk) return clock_get(clk) != 0; } -static inline void clock_init(Clock *clk, uint64_t value) -{ - clock_set(clk, value); -} -static inline void clock_init_hz(Clock *clk, uint64_t value) -{ - clock_set_hz(clk, value); -} -static inline void clock_init_ns(Clock *clk, uint64_t value) -{ - clock_set_ns(clk, value); -} - #endif /* QEMU_HW_CLOCK_H */ -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Let clock_set() return a boolean value whether the clock has been updated or not. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200806123858.30058-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 12 +++++++----- hw/core/clock.c | 7 ++++++- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_set_source(Clock *clk, Clock *src); * @value: the clock's value, 0 means unclocked * * Set the local cached period value of @clk to @value. + * + * @return: true if the clock is changed. */ -void clock_set(Clock *clk, uint64_t value); +bool clock_set(Clock *clk, uint64_t value); -static inline void clock_set_hz(Clock *clk, unsigned hz) +static inline bool clock_set_hz(Clock *clk, unsigned hz) { - clock_set(clk, CLOCK_PERIOD_FROM_HZ(hz)); + return clock_set(clk, CLOCK_PERIOD_FROM_HZ(hz)); } -static inline void clock_set_ns(Clock *clk, unsigned ns) +static inline bool clock_set_ns(Clock *clk, unsigned ns) { - clock_set(clk, CLOCK_PERIOD_FROM_NS(ns)); + return clock_set(clk, CLOCK_PERIOD_FROM_NS(ns)); } /** diff --git a/hw/core/clock.c b/hw/core/clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/clock.c +++ b/hw/core/clock.c @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk) clock_set_callback(clk, NULL, NULL); } -void clock_set(Clock *clk, uint64_t period) +bool clock_set(Clock *clk, uint64_t period) { + if (clk->period == period) { + return false; + } trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_NS(clk->period), CLOCK_PERIOD_TO_NS(period)); clk->period = period; + + return true; } static void clock_propagate_period(Clock *clk, bool call_callbacks) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Avoid propagating the clock change when the clock does not change. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200806123858.30058-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_propagate(Clock *clk); */ static inline void clock_update(Clock *clk, uint64_t value) { - clock_set(clk, value); - clock_propagate(clk); + if (clock_set(clk, value)) { + clock_propagate(clk); + } } static inline void clock_update_hz(Clock *clk, unsigned hz) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Allow the device to execute the DMA transfers in a different AddressSpace. We keep using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200814125533.4047-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ #include "hw/audio/wm8750.h" #include "sysemu/block-backend.h" #include "sysemu/runstate.h" +#include "sysemu/dma.h" #include "exec/address-spaces.h" #include "ui/pixel_ops.h" #include "qemu/cutils.h" @@ -XXX,XX +XXX,XX @@ typedef struct mv88w8618_eth_state { MemoryRegion iomem; qemu_irq irq; + MemoryRegion *dma_mr; + AddressSpace dma_as; uint32_t smir; uint32_t icr; uint32_t imr; @@ -XXX,XX +XXX,XX @@ typedef struct mv88w8618_eth_state { NICConf conf; } mv88w8618_eth_state; -static void eth_rx_desc_put(uint32_t addr, mv88w8618_rx_desc *desc) +static void eth_rx_desc_put(AddressSpace *dma_as, uint32_t addr, + mv88w8618_rx_desc *desc) { cpu_to_le32s(&desc->cmdstat); cpu_to_le16s(&desc->bytes); cpu_to_le16s(&desc->buffer_size); cpu_to_le32s(&desc->buffer); cpu_to_le32s(&desc->next); - cpu_physical_memory_write(addr, desc, sizeof(*desc)); + dma_memory_write(dma_as, addr, desc, sizeof(*desc)); } -static void eth_rx_desc_get(uint32_t addr, mv88w8618_rx_desc *desc) +static void eth_rx_desc_get(AddressSpace *dma_as, uint32_t addr, + mv88w8618_rx_desc *desc) { - cpu_physical_memory_read(addr, desc, sizeof(*desc)); + dma_memory_read(dma_as, addr, desc, sizeof(*desc)); le32_to_cpus(&desc->cmdstat); le16_to_cpus(&desc->bytes); le16_to_cpus(&desc->buffer_size); @@ -XXX,XX +XXX,XX @@ static ssize_t eth_receive(NetClientState *nc, const uint8_t *buf, size_t size) continue; } do { - eth_rx_desc_get(desc_addr, &desc); + eth_rx_desc_get(&s->dma_as, desc_addr, &desc); if ((desc.cmdstat & MP_ETH_RX_OWN) && desc.buffer_size >= size) { - cpu_physical_memory_write(desc.buffer + s->vlan_header, + dma_memory_write(&s->dma_as, desc.buffer + s->vlan_header, buf, size); desc.bytes = size + s->vlan_header; desc.cmdstat &= ~MP_ETH_RX_OWN; @@ -XXX,XX +XXX,XX @@ static ssize_t eth_receive(NetClientState *nc, const uint8_t *buf, size_t size) if (s->icr & s->imr) { qemu_irq_raise(s->irq); } - eth_rx_desc_put(desc_addr, &desc); + eth_rx_desc_put(&s->dma_as, desc_addr, &desc); return size; } desc_addr = desc.next; @@ -XXX,XX +XXX,XX @@ static ssize_t eth_receive(NetClientState *nc, const uint8_t *buf, size_t size) return size; } -static void eth_tx_desc_put(uint32_t addr, mv88w8618_tx_desc *desc) +static void eth_tx_desc_put(AddressSpace *dma_as, uint32_t addr, + mv88w8618_tx_desc *desc) { cpu_to_le32s(&desc->cmdstat); cpu_to_le16s(&desc->res); cpu_to_le16s(&desc->bytes); cpu_to_le32s(&desc->buffer); cpu_to_le32s(&desc->next); - cpu_physical_memory_write(addr, desc, sizeof(*desc)); + dma_memory_write(dma_as, addr, desc, sizeof(*desc)); } -static void eth_tx_desc_get(uint32_t addr, mv88w8618_tx_desc *desc) +static void eth_tx_desc_get(AddressSpace *dma_as, uint32_t addr, + mv88w8618_tx_desc *desc) { - cpu_physical_memory_read(addr, desc, sizeof(*desc)); + dma_memory_read(dma_as, addr, desc, sizeof(*desc)); le32_to_cpus(&desc->cmdstat); le16_to_cpus(&desc->res); le16_to_cpus(&desc->bytes); @@ -XXX,XX +XXX,XX @@ static void eth_send(mv88w8618_eth_state *s, int queue_index) int len; do { - eth_tx_desc_get(desc_addr, &desc); + eth_tx_desc_get(&s->dma_as, desc_addr, &desc); next_desc = desc.next; if (desc.cmdstat & MP_ETH_TX_OWN) { len = desc.bytes; if (len < 2048) { - cpu_physical_memory_read(desc.buffer, buf, len); + dma_memory_read(&s->dma_as, desc.buffer, buf, len); qemu_send_packet(qemu_get_queue(s->nic), buf, len); } desc.cmdstat &= ~MP_ETH_TX_OWN; s->icr |= 1 << (MP_ETH_IRQ_TXLO_BIT - queue_index); - eth_tx_desc_put(desc_addr, &desc); + eth_tx_desc_put(&s->dma_as, desc_addr, &desc); } desc_addr = next_desc; } while (desc_addr != s->tx_queue[queue_index]); @@ -XXX,XX +XXX,XX @@ static void mv88w8618_eth_realize(DeviceState *dev, Error **errp) { mv88w8618_eth_state *s = MV88W8618_ETH(dev); + if (!s->dma_mr) { + error_setg(errp, TYPE_MV88W8618_ETH " 'dma-memory' link not set"); + return; + } + + address_space_init(&s->dma_as, s->dma_mr, "emac-dma"); s->nic = qemu_new_nic(&net_mv88w8618_info, &s->conf, object_get_typename(OBJECT(dev)), dev->id, s); } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription mv88w8618_eth_vmsd = { static Property mv88w8618_eth_properties[] = { DEFINE_NIC_PROPERTIES(mv88w8618_eth_state, conf), + DEFINE_PROP_LINK("dma-memory", mv88w8618_eth_state, dma_mr, + TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) qemu_check_nic_model(&nd_table[0], "mv88w8618"); dev = qdev_new(TYPE_MV88W8618_ETH); qdev_set_nic_properties(dev, &nd_table[0]); + object_property_set_link(OBJECT(dev), "dma-memory", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, MP_ETH_BASE); sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[MP_ETH_IRQ]); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> In commit ce4afed839 ("target/arm: Implement AArch32 HCR and HCR2") the HCR_EL2 register has been changed from type NO_RAW (no underlying state and does not support raw access for state saving/loading) to type CONST (TCG can assume the value to be constant), removing the read/write accessors. We forgot to remove the previous type ARM_CP_NO_RAW. This is not really a problem since the field is overwritten. However it makes code review confuse, so remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200812111223.7787-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = { .access = PL2_RW, .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore }, { .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH, - .type = ARM_CP_NO_RAW, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We need more information than just the mmu_idx in order to create the proper exception syndrome. Only change the function signature so far. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200813200816.3037186-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) } /* Record a tag check failure. */ -static void mte_check_fail(CPUARMState *env, int mmu_idx, +static void mte_check_fail(CPUARMState *env, uint32_t desc, uint64_t dirty_ptr, uintptr_t ra) { + int mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); ARMMMUIdx arm_mmu_idx = core_to_aa64_mmu_idx(mmu_idx); int el, reg_el, tcf, select; uint64_t sctlr; @@ -XXX,XX +XXX,XX @@ uint64_t mte_check1(CPUARMState *env, uint32_t desc, } if (unlikely(!mte_probe1_int(env, desc, ptr, ra, bit55))) { - int mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); - mte_check_fail(env, mmu_idx, ptr, ra); + mte_check_fail(env, desc, ptr, ra); } return useronly_clean_ptr(ptr); @@ -XXX,XX +XXX,XX @@ uint64_t mte_checkN(CPUARMState *env, uint32_t desc, fail_ofs = tag_first + n * TAG_GRANULE - ptr; fail_ofs = ROUND_UP(fail_ofs, esize); - mte_check_fail(env, mmu_idx, ptr + fail_ofs, ra); + mte_check_fail(env, desc, ptr + fail_ofs, ra); } done: @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(mte_check_zva)(CPUARMState *env, uint32_t desc, uint64_t ptr) fail: /* Locate the first nibble that differs. */ i = ctz64(mem_tag ^ ptr_tag) >> 4; - mte_check_fail(env, mmu_idx, align_ptr + i * TAG_GRANULE, ra); + mte_check_fail(env, desc, align_ptr + i * TAG_GRANULE, ra); done: return useronly_clean_ptr(ptr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> According to AArch64.TagCheckFault, none of the other ISS values are provided, so we do not need to go so far as merge_syn_data_abort. But we were missing the WnR bit. Tested-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200813200816.3037186-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/mte_helper.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/mte_helper.c +++ b/target/arm/mte_helper.c @@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc, { int mmu_idx = FIELD_EX32(desc, MTEDESC, MIDX); ARMMMUIdx arm_mmu_idx = core_to_aa64_mmu_idx(mmu_idx); - int el, reg_el, tcf, select; + int el, reg_el, tcf, select, is_write, syn; uint64_t sctlr; reg_el = regime_el(env, arm_mmu_idx); @@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc, */ cpu_restore_state(env_cpu(env), ra, true); env->exception.vaddress = dirty_ptr; - raise_exception(env, EXCP_DATA_ABORT, - syn_data_abort_no_iss(el != 0, 0, 0, 0, 0, 0, 0x11), - exception_target_el(env)); + + is_write = FIELD_EX32(desc, MTEDESC, WRITE); + syn = syn_data_abort_no_iss(el != 0, 0, 0, 0, 0, is_write, 0x11); + raise_exception(env, EXCP_DATA_ABORT, syn, exception_target_el(env)); /* noreturn, but fall through to the assert anyway */ case 0: -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Allow the device to execute the DMA transfers in a different AddressSpace. The A10 and H3 SoC keep using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200814110057.307-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/allwinner-sdhost.h | 6 ++++++ hw/arm/allwinner-a10.c | 2 ++ hw/arm/allwinner-h3.c | 2 ++ hw/sd/allwinner-sdhost.c | 37 ++++++++++++++++++++++++++------ 4 files changed, 41 insertions(+), 6 deletions(-) diff --git a/include/hw/sd/allwinner-sdhost.h b/include/hw/sd/allwinner-sdhost.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/allwinner-sdhost.h +++ b/include/hw/sd/allwinner-sdhost.h @@ -XXX,XX +XXX,XX @@ typedef struct AwSdHostState { /** Interrupt output signal to notify CPU */ qemu_irq irq; + /** Memory region where DMA transfers are done */ + MemoryRegion *dma_mr; + + /** Address space used internally for DMA transfers */ + AddressSpace dma_as; + /** Number of bytes left in current DMA transfer */ uint32_t transfer_cnt; diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) } /* SD/MMC */ + object_property_set_link(OBJECT(&s->mmc0), "dma-memory", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize(SYS_BUS_DEVICE(&s->mmc0), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, AW_A10_MMC0_BASE); sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, qdev_get_gpio_in(dev, 32)); diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->sid), 0, s->memmap[AW_H3_SID]); /* SD/MMC */ + object_property_set_link(OBJECT(&s->mmc0), "dma-memory", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize(SYS_BUS_DEVICE(&s->mmc0), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, s->memmap[AW_H3_MMC0]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, diff --git a/hw/sd/allwinner-sdhost.c b/hw/sd/allwinner-sdhost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/allwinner-sdhost.c +++ b/hw/sd/allwinner-sdhost.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qemu/module.h" #include "qemu/units.h" +#include "qapi/error.h" #include "sysemu/blockdev.h" +#include "sysemu/dma.h" +#include "hw/qdev-properties.h" #include "hw/irq.h" #include "hw/sd/allwinner-sdhost.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sdhost_process_desc(AwSdHostState *s, uint8_t buf[1024]; /* Read descriptor */ - cpu_physical_memory_read(desc_addr, desc, sizeof(*desc)); + dma_memory_read(&s->dma_as, desc_addr, desc, sizeof(*desc)); if (desc->size == 0) { desc->size = klass->max_desc_size; } else if (desc->size > klass->max_desc_size) { @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sdhost_process_desc(AwSdHostState *s, /* Write to SD bus */ if (is_write) { - cpu_physical_memory_read((desc->addr & DESC_SIZE_MASK) + num_done, - buf, buf_bytes); + dma_memory_read(&s->dma_as, + (desc->addr & DESC_SIZE_MASK) + num_done, + buf, buf_bytes); sdbus_write_data(&s->sdbus, buf, buf_bytes); /* Read from SD bus */ } else { sdbus_read_data(&s->sdbus, buf, buf_bytes); - cpu_physical_memory_write((desc->addr & DESC_SIZE_MASK) + num_done, - buf, buf_bytes); + dma_memory_write(&s->dma_as, + (desc->addr & DESC_SIZE_MASK) + num_done, + buf, buf_bytes); } num_done += buf_bytes; } /* Clear hold flag and flush descriptor */ desc->status &= ~DESC_STATUS_HOLD; - cpu_physical_memory_write(desc_addr, desc, sizeof(*desc)); + dma_memory_write(&s->dma_as, desc_addr, desc, sizeof(*desc)); return num_done; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_allwinner_sdhost = { } }; +static Property allwinner_sdhost_properties[] = { + DEFINE_PROP_LINK("dma-memory", AwSdHostState, dma_mr, + TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_END_OF_LIST(), +}; + static void allwinner_sdhost_init(Object *obj) { AwSdHostState *s = AW_SDHOST(obj); @@ -XXX,XX +XXX,XX @@ static void allwinner_sdhost_init(Object *obj) sysbus_init_irq(SYS_BUS_DEVICE(s), &s->irq); } +static void allwinner_sdhost_realize(DeviceState *dev, Error **errp) +{ + AwSdHostState *s = AW_SDHOST(dev); + + if (!s->dma_mr) { + error_setg(errp, TYPE_AW_SDHOST " 'dma-memory' link not set"); + return; + } + + address_space_init(&s->dma_as, s->dma_mr, "sdhost-dma"); +} + static void allwinner_sdhost_reset(DeviceState *dev) { AwSdHostState *s = AW_SDHOST(dev); @@ -XXX,XX +XXX,XX @@ static void allwinner_sdhost_class_init(ObjectClass *klass, void *data) dc->reset = allwinner_sdhost_reset; dc->vmsd = &vmstate_allwinner_sdhost; + dc->realize = allwinner_sdhost_realize; + device_class_set_props(dc, allwinner_sdhost_properties); } static void allwinner_sdhost_sun4i_class_init(ObjectClass *klass, void *data) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Allow the device to execute the DMA transfers in a different AddressSpace. The H3 SoC keeps using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200814122907.27732-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/allwinner-sun8i-emac.h | 6 ++++ hw/arm/allwinner-h3.c | 2 ++ hw/net/allwinner-sun8i-emac.c | 46 +++++++++++++++++---------- 3 files changed, 38 insertions(+), 16 deletions(-) diff --git a/include/hw/net/allwinner-sun8i-emac.h b/include/hw/net/allwinner-sun8i-emac.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/allwinner-sun8i-emac.h +++ b/include/hw/net/allwinner-sun8i-emac.h @@ -XXX,XX +XXX,XX @@ typedef struct AwSun8iEmacState { /** Interrupt output signal to notify CPU */ qemu_irq irq; + /** Memory region where DMA transfers are done */ + MemoryRegion *dma_mr; + + /** Address space used internally for DMA transfers */ + AddressSpace dma_as; + /** Generic Network Interface Controller (NIC) for networking API */ NICState *nic; diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qemu_check_nic_model(&nd_table[0], TYPE_AW_SUN8I_EMAC); qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]); } + object_property_set_link(OBJECT(&s->emac), "dma-memory", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize(SYS_BUS_DEVICE(&s->emac), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->emac), 0, s->memmap[AW_H3_EMAC]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->emac), 0, diff --git a/hw/net/allwinner-sun8i-emac.c b/hw/net/allwinner-sun8i-emac.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/allwinner-sun8i-emac.c +++ b/hw/net/allwinner-sun8i-emac.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" +#include "qapi/error.h" #include "hw/sysbus.h" #include "migration/vmstate.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "net/checksum.h" #include "qemu/module.h" #include "exec/cpu-common.h" +#include "sysemu/dma.h" #include "hw/net/allwinner-sun8i-emac.h" /* EMAC register offsets */ @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_update_irq(AwSun8iEmacState *s) qemu_set_irq(s->irq, (s->int_sta & s->int_en) != 0); } -static uint32_t allwinner_sun8i_emac_next_desc(FrameDescriptor *desc, +static uint32_t allwinner_sun8i_emac_next_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, size_t min_size) { uint32_t paddr = desc->next; - cpu_physical_memory_read(paddr, desc, sizeof(*desc)); + dma_memory_read(&s->dma_as, paddr, desc, sizeof(*desc)); if ((desc->status & DESC_STATUS_CTL) && (desc->status2 & DESC_STATUS2_BUF_SIZE_MASK) >= min_size) { @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sun8i_emac_next_desc(FrameDescriptor *desc, } } -static uint32_t allwinner_sun8i_emac_get_desc(FrameDescriptor *desc, +static uint32_t allwinner_sun8i_emac_get_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, uint32_t start_addr, size_t min_size) { @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sun8i_emac_get_desc(FrameDescriptor *desc, /* Note that the list is a cycle. Last entry points back to the head. */ while (desc_addr != 0) { - cpu_physical_memory_read(desc_addr, desc, sizeof(*desc)); + dma_memory_read(&s->dma_as, desc_addr, desc, sizeof(*desc)); if ((desc->status & DESC_STATUS_CTL) && (desc->status2 & DESC_STATUS2_BUF_SIZE_MASK) >= min_size) { @@ -XXX,XX +XXX,XX @@ static uint32_t allwinner_sun8i_emac_rx_desc(AwSun8iEmacState *s, FrameDescriptor *desc, size_t min_size) { - return allwinner_sun8i_emac_get_desc(desc, s->rx_desc_curr, min_size); + return allwinner_sun8i_emac_get_desc(s, desc, s->rx_desc_curr, min_size); } static uint32_t allwinner_sun8i_emac_tx_desc(AwSun8iEmacState *s, FrameDescriptor *desc, size_t min_size) { - return allwinner_sun8i_emac_get_desc(desc, s->tx_desc_head, min_size); + return allwinner_sun8i_emac_get_desc(s, desc, s->tx_desc_head, min_size); } -static void allwinner_sun8i_emac_flush_desc(FrameDescriptor *desc, +static void allwinner_sun8i_emac_flush_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, uint32_t phys_addr) { - cpu_physical_memory_write(phys_addr, desc, sizeof(*desc)); + dma_memory_write(&s->dma_as, phys_addr, desc, sizeof(*desc)); } static bool allwinner_sun8i_emac_can_receive(NetClientState *nc) @@ -XXX,XX +XXX,XX @@ static ssize_t allwinner_sun8i_emac_receive(NetClientState *nc, << RX_DESC_STATUS_FRM_LEN_SHIFT; } - cpu_physical_memory_write(desc.addr, buf, desc_bytes); - allwinner_sun8i_emac_flush_desc(&desc, s->rx_desc_curr); + dma_memory_write(&s->dma_as, desc.addr, buf, desc_bytes); + allwinner_sun8i_emac_flush_desc(s, &desc, s->rx_desc_curr); trace_allwinner_sun8i_emac_receive(s->rx_desc_curr, desc.addr, desc_bytes); @@ -XXX,XX +XXX,XX @@ static ssize_t allwinner_sun8i_emac_receive(NetClientState *nc, bytes_left -= desc_bytes; /* Move to the next descriptor */ - s->rx_desc_curr = allwinner_sun8i_emac_next_desc(&desc, 64); + s->rx_desc_curr = allwinner_sun8i_emac_next_desc(s, &desc, 64); if (!s->rx_desc_curr) { /* Not enough buffer space available */ s->int_sta |= INT_STA_RX_BUF_UA; @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_transmit(AwSun8iEmacState *s) desc.status |= TX_DESC_STATUS_LENGTH_ERR; break; } - cpu_physical_memory_read(desc.addr, packet_buf + packet_bytes, bytes); + dma_memory_read(&s->dma_as, desc.addr, packet_buf + packet_bytes, bytes); packet_bytes += bytes; desc.status &= ~DESC_STATUS_CTL; - allwinner_sun8i_emac_flush_desc(&desc, s->tx_desc_curr); + allwinner_sun8i_emac_flush_desc(s, &desc, s->tx_desc_curr); /* After the last descriptor, send the packet */ if (desc.status2 & TX_DESC_STATUS2_LAST_DESC) { @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_transmit(AwSun8iEmacState *s) packet_bytes = 0; transmitted++; } - s->tx_desc_curr = allwinner_sun8i_emac_next_desc(&desc, 0); + s->tx_desc_curr = allwinner_sun8i_emac_next_desc(s, &desc, 0); } /* Raise transmit completed interrupt */ @@ -XXX,XX +XXX,XX @@ static uint64_t allwinner_sun8i_emac_read(void *opaque, hwaddr offset, break; case REG_TX_CUR_BUF: /* Transmit Current Buffer */ if (s->tx_desc_curr != 0) { - cpu_physical_memory_read(s->tx_desc_curr, &desc, sizeof(desc)); + dma_memory_read(&s->dma_as, s->tx_desc_curr, &desc, sizeof(desc)); value = desc.addr; } else { value = 0; @@ -XXX,XX +XXX,XX @@ static uint64_t allwinner_sun8i_emac_read(void *opaque, hwaddr offset, break; case REG_RX_CUR_BUF: /* Receive Current Buffer */ if (s->rx_desc_curr != 0) { - cpu_physical_memory_read(s->rx_desc_curr, &desc, sizeof(desc)); + dma_memory_read(&s->dma_as, s->rx_desc_curr, &desc, sizeof(desc)); value = desc.addr; } else { value = 0; @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_realize(DeviceState *dev, Error **errp) { AwSun8iEmacState *s = AW_SUN8I_EMAC(dev); + if (!s->dma_mr) { + error_setg(errp, TYPE_AW_SUN8I_EMAC " 'dma-memory' link not set"); + return; + } + + address_space_init(&s->dma_as, s->dma_mr, "emac-dma"); + qemu_macaddr_default_if_unset(&s->conf.macaddr); s->nic = qemu_new_nic(&net_allwinner_sun8i_emac_info, &s->conf, object_get_typename(OBJECT(dev)), dev->id, s); @@ -XXX,XX +XXX,XX @@ static void allwinner_sun8i_emac_realize(DeviceState *dev, Error **errp) static Property allwinner_sun8i_emac_properties[] = { DEFINE_NIC_PROPERTIES(AwSun8iEmacState, conf), DEFINE_PROP_UINT8("phy-addr", AwSun8iEmacState, mii_phy_addr, 0), + DEFINE_PROP_LINK("dma-memory", AwSun8iEmacState, dma_mr, + TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As we want to call qdev_connect_clock_in() before the device is realized, we need to uninline cadence_uart_create() first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/cadence_uart.h | 17 ----------------- hw/arm/xilinx_zynq.c | 14 ++++++++++++-- 2 files changed, 12 insertions(+), 19 deletions(-) diff --git a/include/hw/char/cadence_uart.h b/include/hw/char/cadence_uart.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/cadence_uart.h +++ b/include/hw/char/cadence_uart.h @@ -XXX,XX +XXX,XX @@ typedef struct { Clock *refclk; } CadenceUARTState; -static inline DeviceState *cadence_uart_create(hwaddr addr, - qemu_irq irq, - Chardev *chr) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CADENCE_UART); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_chr(dev, "chardev", chr); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, irq); - - return dev; -} - #endif diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]); sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]); - dev = cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0)); + dev = qdev_new(TYPE_CADENCE_UART); + busdev = SYS_BUS_DEVICE(dev); + qdev_prop_set_chr(dev, "chardev", serial_hd(0)); + sysbus_realize_and_unref(busdev, &error_fatal); + sysbus_mmio_map(busdev, 0, 0xE0000000); + sysbus_connect_irq(busdev, 0, pic[59 - IRQ_OFFSET]); qdev_connect_clock_in(dev, "refclk", qdev_get_clock_out(slcr, "uart0_ref_clk")); - dev = cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1)); + dev = qdev_new(TYPE_CADENCE_UART); + busdev = SYS_BUS_DEVICE(dev); + qdev_prop_set_chr(dev, "chardev", serial_hd(1)); + sysbus_realize_and_unref(busdev, &error_fatal); + sysbus_mmio_map(busdev, 0, 0xE0001000); + sysbus_connect_irq(busdev, 0, pic[82 - IRQ_OFFSET]); qdev_connect_clock_in(dev, "refclk", qdev_get_clock_out(slcr, "uart1_ref_clk")); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Clock canonical name is set in device_set_realized (see the block added to hw/core/qdev.c in commit 0e6934f264). If we connect a clock after the device is realized, this code is not executed. This is currently not a problem as this name is only used for trace events, however this disrupt tracing. Fix by calling qdev_connect_clock_in() before realizing. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) 1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa, 0); - /* Create slcr, keep a pointer to connect clocks */ - slcr = qdev_new("xilinx,zynq_slcr"); - sysbus_realize_and_unref(SYS_BUS_DEVICE(slcr), &error_fatal); - sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000); - /* Create the main clock source, and feed slcr with it */ zynq_machine->ps_clk = CLOCK(object_new(TYPE_CLOCK)); object_property_add_child(OBJECT(zynq_machine), "ps_clk", OBJECT(zynq_machine->ps_clk)); object_unref(OBJECT(zynq_machine->ps_clk)); clock_set_hz(zynq_machine->ps_clk, PS_CLK_FREQUENCY); + + /* Create slcr, keep a pointer to connect clocks */ + slcr = qdev_new("xilinx,zynq_slcr"); qdev_connect_clock_in(slcr, "ps_clk", zynq_machine->ps_clk); + sysbus_realize_and_unref(SYS_BUS_DEVICE(slcr), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000); dev = qdev_new(TYPE_A9MPCORE_PRIV); qdev_prop_set_uint32(dev, "num-cpu", 1); @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) dev = qdev_new(TYPE_CADENCE_UART); busdev = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(0)); + qdev_connect_clock_in(dev, "refclk", + qdev_get_clock_out(slcr, "uart0_ref_clk")); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0xE0000000); sysbus_connect_irq(busdev, 0, pic[59 - IRQ_OFFSET]); - qdev_connect_clock_in(dev, "refclk", - qdev_get_clock_out(slcr, "uart0_ref_clk")); dev = qdev_new(TYPE_CADENCE_UART); busdev = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(1)); + qdev_connect_clock_in(dev, "refclk", + qdev_get_clock_out(slcr, "uart1_ref_clk")); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0xE0001000); sysbus_connect_irq(busdev, 0, pic[82 - IRQ_OFFSET]); - qdev_connect_clock_in(dev, "refclk", - qdev_get_clock_out(slcr, "uart1_ref_clk")); sysbus_create_varargs("cadence_ttc", 0xF8001000, pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> We want to assert the device is not realized. To avoid overloading this header including "hw/qdev-core.h", uninline the function first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-clock.h | 6 +----- hw/core/qdev-clock.c | 5 +++++ 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/hw/qdev-clock.h b/include/hw/qdev-clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-clock.h +++ b/include/hw/qdev-clock.h @@ -XXX,XX +XXX,XX @@ Clock *qdev_get_clock_out(DeviceState *dev, const char *name); * Set the source clock of input clock @name of device @dev to @source. * @source period update will be propagated to @name clock. */ -static inline void qdev_connect_clock_in(DeviceState *dev, const char *name, - Clock *source) -{ - clock_set_source(qdev_get_clock_in(dev, name), source); -} +void qdev_connect_clock_in(DeviceState *dev, const char *name, Clock *source); /** * qdev_alias_clock: diff --git a/hw/core/qdev-clock.c b/hw/core/qdev-clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev-clock.c +++ b/hw/core/qdev-clock.c @@ -XXX,XX +XXX,XX @@ Clock *qdev_alias_clock(DeviceState *dev, const char *name, return ncl->clock; } + +void qdev_connect_clock_in(DeviceState *dev, const char *name, Clock *source) +{ + clock_set_source(qdev_get_clock_in(dev, name), source); +} -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Clock canonical name is set in device_set_realized (see the block added to hw/core/qdev.c in commit 0e6934f264). If we connect a clock after the device is realized, this code is not executed. This is currently not a problem as this name is only used for trace events, however this disrupt tracing. Add a comment to document qdev_connect_clock_in() must be called before the device is realized, and assert this condition. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-clock.h | 2 ++ hw/core/qdev-clock.c | 1 + 2 files changed, 3 insertions(+) diff --git a/include/hw/qdev-clock.h b/include/hw/qdev-clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-clock.h +++ b/include/hw/qdev-clock.h @@ -XXX,XX +XXX,XX @@ Clock *qdev_get_clock_out(DeviceState *dev, const char *name); * * Set the source clock of input clock @name of device @dev to @source. * @source period update will be propagated to @name clock. + * + * Must be called before @dev is realized. */ void qdev_connect_clock_in(DeviceState *dev, const char *name, Clock *source); diff --git a/hw/core/qdev-clock.c b/hw/core/qdev-clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev-clock.c +++ b/hw/core/qdev-clock.c @@ -XXX,XX +XXX,XX @@ Clock *qdev_alias_clock(DeviceState *dev, const char *name, void qdev_connect_clock_in(DeviceState *dev, const char *name, Clock *source) { + assert(!dev->realized); clock_set_source(qdev_get_clock_in(dev, name), source); } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To better align the read/write accesses, display the value after the offset (read accesses only display the offset). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/unimp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) { UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); - qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " "(size %d, offset 0x%" HWADDR_PRIx ")\n", s->name, size, offset); return 0; @@ -XXX,XX +XXX,XX @@ static void unimp_write(void *opaque, hwaddr offset, UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " - "(size %d, value 0x%" PRIx64 - ", offset 0x%" HWADDR_PRIx ")\n", - s->name, size, value, offset); + "(size %d, offset 0x%" HWADDR_PRIx + ", value 0x%" PRIx64 ")\n", + s->name, size, offset, value); } static const MemoryRegionOps unimp_ops = { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To quickly notice the access size, display the value with the width of the access (i.e. 16-bit access is displayed 0x0000, while 8-bit access 0x00). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/unimp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ static void unimp_write(void *opaque, hwaddr offset, qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " "(size %d, offset 0x%" HWADDR_PRIx - ", value 0x%" PRIx64 ")\n", - s->name, size, offset, value); + ", value 0x%0*" PRIx64 ")\n", + s->name, size, offset, size << 1, value); } static const MemoryRegionOps unimp_ops = { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To have a better idea of how big is the region where the offset belongs, display the value with the width of the region size (i.e. a region of 0x1000 bytes uses 0x000 format). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/unimp.h | 1 + hw/misc/unimp.c | 10 ++++++---- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/include/hw/misc/unimp.h b/include/hw/misc/unimp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/unimp.h +++ b/include/hw/misc/unimp.h @@ -XXX,XX +XXX,XX @@ typedef struct { SysBusDevice parent_obj; MemoryRegion iomem; + unsigned offset_fmt_width; char *name; uint64_t size; } UnimplementedDeviceState; diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " - "(size %d, offset 0x%" HWADDR_PRIx ")\n", - s->name, size, offset); + "(size %d, offset 0x%0*" HWADDR_PRIx ")\n", + s->name, size, s->offset_fmt_width, offset); return 0; } @@ -XXX,XX +XXX,XX @@ static void unimp_write(void *opaque, hwaddr offset, UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " - "(size %d, offset 0x%" HWADDR_PRIx + "(size %d, offset 0x%0*" HWADDR_PRIx ", value 0x%0*" PRIx64 ")\n", - s->name, size, offset, size << 1, value); + s->name, size, s->offset_fmt_width, offset, size << 1, value); } static const MemoryRegionOps unimp_ops = { @@ -XXX,XX +XXX,XX @@ static void unimp_realize(DeviceState *dev, Error **errp) return; } + s->offset_fmt_width = DIV_ROUND_UP(64 - clz64(s->size - 1), 4); + memory_region_init_io(&s->iomem, OBJECT(s), &unimp_ops, s, s->name, s->size); sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); -- 2.20.1 From: Eduardo Habkost <ehabkost@redhat.com> TYPE_ARM_SSE is a TYPE_SYS_BUS_DEVICE subclass, but ARMSSEClass::parent_class is declared as DeviceClass. It never caused any problems by pure luck: We were not setting class_size for TYPE_ARM_SSE, so class_size of TYPE_SYS_BUS_DEVICE was being used (sizeof(SysBusDeviceClass)). This made the system allocate enough memory for TYPE_ARM_SSE devices even though ARMSSEClass was too small for a sysbus device. Additionally, the ARMSSEClass::info field ended up at the same offset as SysBusDeviceClass::explicit_ofw_unit_address. This would make sysbus_get_fw_dev_path() crash for the device. Luckily, sysbus_get_fw_dev_path() never gets called for TYPE_ARM_SSE devices, because qdev_get_fw_dev_path() is only used by the boot device code, and TYPE_ARM_SSE devices don't appear at the fw_boot_order list. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20200826181006.4097163-1-ehabkost@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { typedef struct ARMSSEInfo ARMSSEInfo; typedef struct ARMSSEClass { - DeviceClass parent_class; + SysBusDeviceClass parent_class; const ARMSSEInfo *info; } ARMSSEClass; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo armsse_info = { .name = TYPE_ARMSSE, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(ARMSSE), + .class_size = sizeof(ARMSSEClass), .instance_init = armsse_init, .abstract = true, .interfaces = (InterfaceInfo[]) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Add left-shift to match the existing right-shift. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/qemu/int128.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/qemu/int128.h b/include/qemu/int128.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/int128.h +++ b/include/qemu/int128.h @@ -XXX,XX +XXX,XX @@ static inline Int128 int128_rshift(Int128 a, int n) return a >> n; } +static inline Int128 int128_lshift(Int128 a, int n) +{ + return a << n; +} + static inline Int128 int128_add(Int128 a, Int128 b) { return a + b; @@ -XXX,XX +XXX,XX @@ static inline Int128 int128_rshift(Int128 a, int n) } } +static inline Int128 int128_lshift(Int128 a, int n) +{ + uint64_t l = a.lo << (n & 63); + if (n >= 64) { + return int128_make128(0, l); + } else if (n > 0) { + return int128_make128(l, (a.hi << n) | (a.lo >> (64 - n))); + } + return a; +} + static inline Int128 int128_add(Int128 a, Int128 b) { uint64_t lo = a.lo + b.lo; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model the new function on gen_gvec_fn2 in translate-a64.c, but indicating which kind of register and in which order. Since there is only one user of do_vector2_z, fold it into do_mov_z. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) } /* Invoke a vector expander on two Zregs. */ -static bool do_vector2_z(DisasContext *s, GVecGen2Fn *gvec_fn, - int esz, int rd, int rn) + +static void gen_gvec_fn_zz(DisasContext *s, GVecGen2Fn *gvec_fn, + int esz, int rd, int rn) { - if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - gvec_fn(esz, vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), vsz, vsz); - } - return true; + unsigned vsz = vec_full_reg_size(s); + gvec_fn(esz, vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), vsz, vsz); } /* Invoke a vector expander on three Zregs. */ @@ -XXX,XX +XXX,XX @@ static bool do_vector3_z(DisasContext *s, GVecGen3Fn *gvec_fn, /* Invoke a vector move on two Zregs. */ static bool do_mov_z(DisasContext *s, int rd, int rn) { - return do_vector2_z(s, tcg_gen_gvec_mov, 0, rd, rn); + if (sve_access_check(s)) { + gen_gvec_fn_zz(s, tcg_gen_gvec_mov, MO_8, rd, rn); + } + return true; } /* Initialize a Zreg with replications of a 64-bit immediate. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model gen_gvec_fn_zzz on gen_gvec_fn3 in translate-a64.c, but indicating which kind of register and in which order. Model do_zzz_fn on the other do_foo functions that take an argument set and verify sve enabled. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 43 +++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_fn_zz(DisasContext *s, GVecGen2Fn *gvec_fn, } /* Invoke a vector expander on three Zregs. */ -static bool do_vector3_z(DisasContext *s, GVecGen3Fn *gvec_fn, - int esz, int rd, int rn, int rm) +static void gen_gvec_fn_zzz(DisasContext *s, GVecGen3Fn *gvec_fn, + int esz, int rd, int rn, int rm) { - if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - gvec_fn(esz, vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - vec_full_reg_offset(s, rm), vsz, vsz); - } - return true; + unsigned vsz = vec_full_reg_size(s); + gvec_fn(esz, vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), vsz, vsz); } /* Invoke a vector move on two Zregs. */ @@ -XXX,XX +XXX,XX @@ const uint64_t pred_esz_masks[4] = { *** SVE Logical - Unpredicated Group */ +static bool do_zzz_fn(DisasContext *s, arg_rrr_esz *a, GVecGen3Fn *gvec_fn) +{ + if (sve_access_check(s)) { + gen_gvec_fn_zzz(s, gvec_fn, a->esz, a->rd, a->rn, a->rm); + } + return true; +} + static bool trans_AND_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_and, 0, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_and); } static bool trans_ORR_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_or, 0, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_or); } static bool trans_EOR_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_xor, 0, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_xor); } static bool trans_BIC_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_andc, 0, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_andc); } /* @@ -XXX,XX +XXX,XX @@ static bool trans_BIC_zzz(DisasContext *s, arg_rrr_esz *a) static bool trans_ADD_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_add, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_add); } static bool trans_SUB_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_sub, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_sub); } static bool trans_SQADD_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_ssadd, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_ssadd); } static bool trans_SQSUB_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_sssub, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_sssub); } static bool trans_UQADD_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_usadd, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_usadd); } static bool trans_UQSUB_zzz(DisasContext *s, arg_rrr_esz *a) { - return do_vector3_z(s, tcg_gen_gvec_ussub, a->esz, a->rd, a->rn, a->rm); + return do_zzz_fn(s, a, tcg_gen_gvec_ussub); } /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We want to ensure that access is checked by the time we ask for a specific fp/vector register. We want to ensure that we do not emit two lots of code to raise an exception. But sometimes it's difficult to cleanly organize the code such that we never pass through sve_check_access exactly once. Allow multiple calls so long as the result is true, that is, no exception to be raised. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 1 + target/arm/translate-a64.c | 27 ++++++++++++++++----------- 2 files changed, 17 insertions(+), 11 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { * that it is set at the point where we actually touch the FP regs. */ bool fp_access_checked; + bool sve_access_checked; /* ARMv8 single-step state (this is distinct from the QEMU gdbstub * single-step support). */ diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void do_vec_ld(DisasContext *s, int destidx, int element, * unallocated-encoding checks (otherwise the syndrome information * for the resulting exception will be incorrect). */ -static inline bool fp_access_check(DisasContext *s) +static bool fp_access_check(DisasContext *s) { - assert(!s->fp_access_checked); - s->fp_access_checked = true; + if (s->fp_excp_el) { + assert(!s->fp_access_checked); + s->fp_access_checked = true; - if (!s->fp_excp_el) { - return true; + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return false; } - - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); - return false; + s->fp_access_checked = true; + return true; } /* Check that SVE access is enabled. If it is, return true. @@ -XXX,XX +XXX,XX @@ static inline bool fp_access_check(DisasContext *s) bool sve_access_check(DisasContext *s) { if (s->sve_excp_el) { - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn_sve_access_trap(), - s->sve_excp_el); + assert(!s->sve_access_checked); + s->sve_access_checked = true; + + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_sve_access_trap(), s->sve_excp_el); return false; } + s->sve_access_checked = true; return fp_access_check(s); } @@ -XXX,XX +XXX,XX @@ static void disas_a64_insn(CPUARMState *env, DisasContext *s) s->base.pc_next += 4; s->fp_access_checked = false; + s->sve_access_checked = false; if (dc_isar_feature(aa64_bti, s)) { if (s->base.num_insns == 1) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the only user of the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_dupi_z(DisasContext *s, int rd, uint64_t word) tcg_gen_gvec_dup_imm(MO_64, vec_full_reg_offset(s, rd), vsz, vsz, word); } -/* Invoke a vector expander on two Pregs. */ -static bool do_vector2_p(DisasContext *s, GVecGen2Fn *gvec_fn, - int esz, int rd, int rn) -{ - if (sve_access_check(s)) { - unsigned psz = pred_gvec_reg_size(s); - gvec_fn(esz, pred_full_reg_offset(s, rd), - pred_full_reg_offset(s, rn), psz, psz); - } - return true; -} - /* Invoke a vector expander on three Pregs. */ static bool do_vector3_p(DisasContext *s, GVecGen3Fn *gvec_fn, int esz, int rd, int rn, int rm) @@ -XXX,XX +XXX,XX @@ static bool do_vecop4_p(DisasContext *s, const GVecGen4 *gvec_op, /* Invoke a vector move on two Pregs. */ static bool do_mov_p(DisasContext *s, int rd, int rn) { - return do_vector2_p(s, tcg_gen_gvec_mov, 0, rd, rn); + if (sve_access_check(s)) { + unsigned psz = pred_gvec_reg_size(s); + tcg_gen_gvec_mov(MO_8, pred_full_reg_offset(s, rd), + pred_full_reg_offset(s, rn), psz, psz); + } + return true; } /* Set the cpu flags as per a return from an SVE helper. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Move the check for !S into do_pppp_flags, which allows to merge in do_vecop4_p. Split out gen_gvec_fn_ppp without sve_access_check, to mirror gen_gvec_fn_zzz. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 111 ++++++++++++++----------------------- 1 file changed, 43 insertions(+), 68 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_dupi_z(DisasContext *s, int rd, uint64_t word) } /* Invoke a vector expander on three Pregs. */ -static bool do_vector3_p(DisasContext *s, GVecGen3Fn *gvec_fn, - int esz, int rd, int rn, int rm) +static void gen_gvec_fn_ppp(DisasContext *s, GVecGen3Fn *gvec_fn, + int rd, int rn, int rm) { - if (sve_access_check(s)) { - unsigned psz = pred_gvec_reg_size(s); - gvec_fn(esz, pred_full_reg_offset(s, rd), - pred_full_reg_offset(s, rn), - pred_full_reg_offset(s, rm), psz, psz); - } - return true; -} - -/* Invoke a vector operation on four Pregs. */ -static bool do_vecop4_p(DisasContext *s, const GVecGen4 *gvec_op, - int rd, int rn, int rm, int rg) -{ - if (sve_access_check(s)) { - unsigned psz = pred_gvec_reg_size(s); - tcg_gen_gvec_4(pred_full_reg_offset(s, rd), - pred_full_reg_offset(s, rn), - pred_full_reg_offset(s, rm), - pred_full_reg_offset(s, rg), - psz, psz, gvec_op); - } - return true; + unsigned psz = pred_gvec_reg_size(s); + gvec_fn(MO_64, pred_full_reg_offset(s, rd), + pred_full_reg_offset(s, rn), + pred_full_reg_offset(s, rm), psz, psz); } /* Invoke a vector move on two Pregs. */ @@ -XXX,XX +XXX,XX @@ static bool do_pppp_flags(DisasContext *s, arg_rprr_s *a, int mofs = pred_full_reg_offset(s, a->rm); int gofs = pred_full_reg_offset(s, a->pg); + if (!a->s) { + tcg_gen_gvec_4(dofs, nofs, mofs, gofs, psz, psz, gvec_op); + return true; + } + if (psz == 8) { /* Do the operation and the flags generation in temps. */ TCGv_i64 pd = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static bool trans_AND_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_and_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else if (a->rn == a->rm) { - if (a->pg == a->rn) { - return do_mov_p(s, a->rd, a->rn); - } else { - return do_vector3_p(s, tcg_gen_gvec_and, 0, a->rd, a->rn, a->pg); + + if (!a->s) { + if (!sve_access_check(s)) { + return true; + } + if (a->rn == a->rm) { + if (a->pg == a->rn) { + do_mov_p(s, a->rd, a->rn); + } else { + gen_gvec_fn_ppp(s, tcg_gen_gvec_and, a->rd, a->rn, a->pg); + } + return true; + } else if (a->pg == a->rn || a->pg == a->rm) { + gen_gvec_fn_ppp(s, tcg_gen_gvec_and, a->rd, a->rn, a->rm); + return true; } - } else if (a->pg == a->rn || a->pg == a->rm) { - return do_vector3_p(s, tcg_gen_gvec_and, 0, a->rd, a->rn, a->rm); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); } + return do_pppp_flags(s, a, &op); } static void gen_bic_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_BIC_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_bic_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else if (a->pg == a->rn) { - return do_vector3_p(s, tcg_gen_gvec_andc, 0, a->rd, a->rn, a->rm); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); + + if (!a->s && a->pg == a->rn) { + if (sve_access_check(s)) { + gen_gvec_fn_ppp(s, tcg_gen_gvec_andc, a->rd, a->rn, a->rm); + } + return true; } + return do_pppp_flags(s, a, &op); } static void gen_eor_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_EOR_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_eor_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); - } + return do_pppp_flags(s, a, &op); } static void gen_sel_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_SEL_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_sel_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; + if (a->s) { return false; - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); } + return do_pppp_flags(s, a, &op); } static void gen_orr_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_ORR_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_orr_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else if (a->pg == a->rn && a->rn == a->rm) { + + if (!a->s && a->pg == a->rn && a->rn == a->rm) { return do_mov_p(s, a->rd, a->rn); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); } + return do_pppp_flags(s, a, &op); } static void gen_orn_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_ORN_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_orn_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); - } + return do_pppp_flags(s, a, &op); } static void gen_nor_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_NOR_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_nor_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); - } + return do_pppp_flags(s, a, &op); } static void gen_nand_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) @@ -XXX,XX +XXX,XX @@ static bool trans_NAND_pppp(DisasContext *s, arg_rprr_s *a) .fno = gen_helper_sve_nand_pppp, .prefer_i64 = TCG_TARGET_REG_BITS == 64, }; - if (a->s) { - return do_pppp_flags(s, a, &op); - } else { - return do_vecop4_p(s, &op, a->rd, a->rn, a->rm, a->pg); - } + return do_pppp_flags(s, a, &op); } /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The gvec operation was added after the initial implementation of the SEL instruction and was missed in the conversion. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 31 ++++++++----------------------- 1 file changed, 8 insertions(+), 23 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_EOR_pppp(DisasContext *s, arg_rprr_s *a) return do_pppp_flags(s, a, &op); } -static void gen_sel_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) -{ - tcg_gen_and_i64(pn, pn, pg); - tcg_gen_andc_i64(pm, pm, pg); - tcg_gen_or_i64(pd, pn, pm); -} - -static void gen_sel_pg_vec(unsigned vece, TCGv_vec pd, TCGv_vec pn, - TCGv_vec pm, TCGv_vec pg) -{ - tcg_gen_and_vec(vece, pn, pn, pg); - tcg_gen_andc_vec(vece, pm, pm, pg); - tcg_gen_or_vec(vece, pd, pn, pm); -} - static bool trans_SEL_pppp(DisasContext *s, arg_rprr_s *a) { - static const GVecGen4 op = { - .fni8 = gen_sel_pg_i64, - .fniv = gen_sel_pg_vec, - .fno = gen_helper_sve_sel_pppp, - .prefer_i64 = TCG_TARGET_REG_BITS == 64, - }; - if (a->s) { return false; } - return do_pppp_flags(s, a, &op); + if (sve_access_check(s)) { + unsigned psz = pred_gvec_reg_size(s); + tcg_gen_gvec_bitsel(MO_8, pred_full_reg_offset(s, a->rd), + pred_full_reg_offset(s, a->pg), + pred_full_reg_offset(s, a->rn), + pred_full_reg_offset(s, a->rm), psz, psz); + } + return true; } static void gen_orr_pg_i64(TCGv_i64 pd, TCGv_i64 pn, TCGv_i64 pm, TCGv_i64 pg) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model after gen_gvec_fn_zzz et al. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } -/* Invoke a vector expander on two Zregs. */ +/* Invoke an out-of-line helper on 3 Zregs and a predicate. */ +static void gen_gvec_ool_zzzp(DisasContext *s, gen_helper_gvec_4 *fn, + int rd, int rn, int rm, int pg, int data) +{ + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + pred_full_reg_offset(s, pg), + vsz, vsz, data, fn); +} +/* Invoke a vector expander on two Zregs. */ static void gen_gvec_fn_zz(DisasContext *s, GVecGen2Fn *gvec_fn, int esz, int rd, int rn) { @@ -XXX,XX +XXX,XX @@ static bool trans_UQSUB_zzz(DisasContext *s, arg_rrr_esz *a) static bool do_zpzz_ool(DisasContext *s, arg_rprr_esz *a, gen_helper_gvec_4 *fn) { - unsigned vsz = vec_full_reg_size(s); if (fn == NULL) { return false; } if (sve_access_check(s)) { - tcg_gen_gvec_4_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - pred_full_reg_offset(s, a->pg), - vsz, vsz, 0, fn); + gen_gvec_ool_zzzp(s, fn, a->rd, a->rn, a->rm, a->pg, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static void do_sel_z(DisasContext *s, int rd, int rn, int rm, int pg, int esz) gen_helper_sve_sel_zpzz_b, gen_helper_sve_sel_zpzz_h, gen_helper_sve_sel_zpzz_s, gen_helper_sve_sel_zpzz_d }; - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - vec_full_reg_offset(s, rm), - pred_full_reg_offset(s, pg), - vsz, vsz, 0, fns[esz]); + gen_gvec_ool_zzzp(s, fns[esz], rd, rn, rm, pg, 0); } #define DO_ZPZZ(NAME, name) \ @@ -XXX,XX +XXX,XX @@ static bool trans_RBIT(DisasContext *s, arg_rpr_esz *a) static bool trans_SPLICE(DisasContext *s, arg_rprr_esz *a) { if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_4_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - pred_full_reg_offset(s, a->pg), - vsz, vsz, a->esz, gen_helper_sve_splice); + gen_gvec_ool_zzzp(s, gen_helper_sve_splice, + a->rd, a->rn, a->rm, a->pg, 0); } return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The existing clr functions have only one vector argument, and so can only clear in place. The existing movz functions have two vector arguments, and so can clear while moving. Merge them, with a flag that controls the sense of active vs inactive elements being cleared. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 5 --- target/arm/sve_helper.c | 70 ++++++++------------------------------ target/arm/translate-sve.c | 53 +++++++++++------------------ 3 files changed, 34 insertions(+), 94 deletions(-) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sve_uminv_h, TCG_CALL_NO_RWG, i64, ptr, ptr, i32) DEF_HELPER_FLAGS_3(sve_uminv_s, TCG_CALL_NO_RWG, i64, ptr, ptr, i32) DEF_HELPER_FLAGS_3(sve_uminv_d, TCG_CALL_NO_RWG, i64, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(sve_clr_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(sve_clr_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(sve_clr_s, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(sve_clr_d, TCG_CALL_NO_RWG, void, ptr, ptr, i32) - DEF_HELPER_FLAGS_4(sve_movz_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_movz_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_movz_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_pnext)(void *vd, void *vg, uint32_t pred_desc) return flags; } -/* Store zero into every active element of Zd. We will use this for two - * and three-operand predicated instructions for which logic dictates a - * zero result. In particular, logical shift by element size, which is - * otherwise undefined on the host. - * - * For element sizes smaller than uint64_t, we use tables to expand - * the N bits of the controlling predicate to a byte mask, and clear - * those bytes. +/* + * Copy Zn into Zd, and store zero into inactive elements. + * If inv, store zeros into the active elements. */ -void HELPER(sve_clr_b)(void *vd, void *vg, uint32_t desc) -{ - intptr_t i, opr_sz = simd_oprsz(desc) / 8; - uint64_t *d = vd; - uint8_t *pg = vg; - for (i = 0; i < opr_sz; i += 1) { - d[i] &= ~expand_pred_b(pg[H1(i)]); - } -} - -void HELPER(sve_clr_h)(void *vd, void *vg, uint32_t desc) -{ - intptr_t i, opr_sz = simd_oprsz(desc) / 8; - uint64_t *d = vd; - uint8_t *pg = vg; - for (i = 0; i < opr_sz; i += 1) { - d[i] &= ~expand_pred_h(pg[H1(i)]); - } -} - -void HELPER(sve_clr_s)(void *vd, void *vg, uint32_t desc) -{ - intptr_t i, opr_sz = simd_oprsz(desc) / 8; - uint64_t *d = vd; - uint8_t *pg = vg; - for (i = 0; i < opr_sz; i += 1) { - d[i] &= ~expand_pred_s(pg[H1(i)]); - } -} - -void HELPER(sve_clr_d)(void *vd, void *vg, uint32_t desc) -{ - intptr_t i, opr_sz = simd_oprsz(desc) / 8; - uint64_t *d = vd; - uint8_t *pg = vg; - for (i = 0; i < opr_sz; i += 1) { - if (pg[H1(i)] & 1) { - d[i] = 0; - } - } -} - -/* Copy Zn into Zd, and store zero into inactive elements. */ void HELPER(sve_movz_b)(void *vd, void *vn, void *vg, uint32_t desc) { intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t inv = -(uint64_t)(simd_data(desc) & 1); uint64_t *d = vd, *n = vn; uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { - d[i] = n[i] & expand_pred_b(pg[H1(i)]); + d[i] = n[i] & (expand_pred_b(pg[H1(i)]) ^ inv); } } void HELPER(sve_movz_h)(void *vd, void *vn, void *vg, uint32_t desc) { intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t inv = -(uint64_t)(simd_data(desc) & 1); uint64_t *d = vd, *n = vn; uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { - d[i] = n[i] & expand_pred_h(pg[H1(i)]); + d[i] = n[i] & (expand_pred_h(pg[H1(i)]) ^ inv); } } void HELPER(sve_movz_s)(void *vd, void *vn, void *vg, uint32_t desc) { intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t inv = -(uint64_t)(simd_data(desc) & 1); uint64_t *d = vd, *n = vn; uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { - d[i] = n[i] & expand_pred_s(pg[H1(i)]); + d[i] = n[i] & (expand_pred_s(pg[H1(i)]) ^ inv); } } @@ -XXX,XX +XXX,XX @@ void HELPER(sve_movz_d)(void *vd, void *vn, void *vg, uint32_t desc) intptr_t i, opr_sz = simd_oprsz(desc) / 8; uint64_t *d = vd, *n = vn; uint8_t *pg = vg; + uint8_t inv = simd_data(desc); + for (i = 0; i < opr_sz; i += 1) { - d[i] = n[i] & -(uint64_t)(pg[H1(i)] & 1); + d[i] = n[i] & -(uint64_t)((pg[H1(i)] ^ inv) & 1); } } diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_SADDV(DisasContext *s, arg_rpr_esz *a) *** SVE Shift by Immediate - Predicated Group */ -/* Store zero into every active element of Zd. We will use this for two - * and three-operand predicated instructions for which logic dictates a - * zero result. +/* + * Copy Zn into Zd, storing zeros into inactive elements. + * If invert, store zeros into the active elements. */ -static bool do_clr_zp(DisasContext *s, int rd, int pg, int esz) -{ - static gen_helper_gvec_2 * const fns[4] = { - gen_helper_sve_clr_b, gen_helper_sve_clr_h, - gen_helper_sve_clr_s, gen_helper_sve_clr_d, - }; - if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_2_ool(vec_full_reg_offset(s, rd), - pred_full_reg_offset(s, pg), - vsz, vsz, 0, fns[esz]); - } - return true; -} - -/* Copy Zn into Zd, storing zeros into inactive elements. */ -static void do_movz_zpz(DisasContext *s, int rd, int rn, int pg, int esz) +static bool do_movz_zpz(DisasContext *s, int rd, int rn, int pg, + int esz, bool invert) { static gen_helper_gvec_3 * const fns[4] = { gen_helper_sve_movz_b, gen_helper_sve_movz_h, gen_helper_sve_movz_s, gen_helper_sve_movz_d, }; - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - pred_full_reg_offset(s, pg), - vsz, vsz, 0, fns[esz]); + + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + pred_full_reg_offset(s, pg), + vsz, vsz, invert, fns[esz]); + } + return true; } static bool do_zpzi_ool(DisasContext *s, arg_rpri_esz *a, @@ -XXX,XX +XXX,XX @@ static bool trans_LSR_zpzi(DisasContext *s, arg_rpri_esz *a) /* Shift by element size is architecturally valid. For logical shifts, it is a zeroing operation. */ if (a->imm >= (8 << a->esz)) { - return do_clr_zp(s, a->rd, a->pg, a->esz); + return do_movz_zpz(s, a->rd, a->rd, a->pg, a->esz, true); } else { return do_zpzi_ool(s, a, fns[a->esz]); } @@ -XXX,XX +XXX,XX @@ static bool trans_LSL_zpzi(DisasContext *s, arg_rpri_esz *a) /* Shift by element size is architecturally valid. For logical shifts, it is a zeroing operation. */ if (a->imm >= (8 << a->esz)) { - return do_clr_zp(s, a->rd, a->pg, a->esz); + return do_movz_zpz(s, a->rd, a->rd, a->pg, a->esz, true); } else { return do_zpzi_ool(s, a, fns[a->esz]); } @@ -XXX,XX +XXX,XX @@ static bool trans_ASRD(DisasContext *s, arg_rpri_esz *a) /* Shift by element size is architecturally valid. For arithmetic right shift for division, it is a zeroing operation. */ if (a->imm >= (8 << a->esz)) { - return do_clr_zp(s, a->rd, a->pg, a->esz); + return do_movz_zpz(s, a->rd, a->rd, a->pg, a->esz, true); } else { return do_zpzi_ool(s, a, fns[a->esz]); } @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a) /* Zero the inactive elements. */ gen_set_label(over); - do_movz_zpz(s, a->rd, a->rd, a->pg, esz); - return true; + return do_movz_zpz(s, a->rd, a->rd, a->pg, esz, false); } static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, @@ -XXX,XX +XXX,XX @@ static bool trans_MOVPRFX_m(DisasContext *s, arg_rpr_esz *a) static bool trans_MOVPRFX_z(DisasContext *s, arg_rpr_esz *a) { - if (sve_access_check(s)) { - do_movz_zpz(s, a->rd, a->rn, a->pg, a->esz); - } - return true; + return do_movz_zpz(s, a->rd, a->rn, a->pg, a->esz, false); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model after gen_gvec_fn_zzz et al. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } +/* Invoke an out-of-line helper on 2 Zregs and a predicate. */ +static void gen_gvec_ool_zzp(DisasContext *s, gen_helper_gvec_3 *fn, + int rd, int rn, int pg, int data) +{ + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + pred_full_reg_offset(s, pg), + vsz, vsz, data, fn); +} + /* Invoke an out-of-line helper on 3 Zregs and a predicate. */ static void gen_gvec_ool_zzzp(DisasContext *s, gen_helper_gvec_4 *fn, int rd, int rn, int rm, int pg, int data) @@ -XXX,XX +XXX,XX @@ static bool do_zpz_ool(DisasContext *s, arg_rpr_esz *a, gen_helper_gvec_3 *fn) return false; } if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - pred_full_reg_offset(s, a->pg), - vsz, vsz, 0, fn); + gen_gvec_ool_zzp(s, fn, a->rd, a->rn, a->pg, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool do_movz_zpz(DisasContext *s, int rd, int rn, int pg, }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - pred_full_reg_offset(s, pg), - vsz, vsz, invert, fns[esz]); + gen_gvec_ool_zzp(s, fns[esz], rd, rn, pg, invert); } return true; } @@ -XXX,XX +XXX,XX @@ static bool do_zpzi_ool(DisasContext *s, arg_rpri_esz *a, gen_helper_gvec_3 *fn) { if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - pred_full_reg_offset(s, a->pg), - vsz, vsz, a->imm, fn); + gen_gvec_ool_zzp(s, fn, a->rd, a->rn, a->pg, a->imm); } return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 53 +++++++++++++------------------------- 1 file changed, 18 insertions(+), 35 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } +/* Invoke an out-of-line helper on 3 Zregs. */ +static void gen_gvec_ool_zzz(DisasContext *s, gen_helper_gvec_3 *fn, + int rd, int rn, int rm, int data) +{ + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + vsz, vsz, data, fn); +} + /* Invoke an out-of-line helper on 2 Zregs and a predicate. */ static void gen_gvec_ool_zzp(DisasContext *s, gen_helper_gvec_3 *fn, int rd, int rn, int pg, int data) @@ -XXX,XX +XXX,XX @@ static bool do_zzw_ool(DisasContext *s, arg_rrr_esz *a, gen_helper_gvec_3 *fn) return false; } if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, 0, fn); + gen_gvec_ool_zzz(s, fn, a->rd, a->rn, a->rm, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_RDVL(DisasContext *s, arg_RDVL *a) static bool do_adr(DisasContext *s, arg_rrri *a, gen_helper_gvec_3 *fn) { if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, a->imm, fn); + gen_gvec_ool_zzz(s, fn, a->rd, a->rn, a->rm, a->imm); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_FTSSEL(DisasContext *s, arg_rrr_esz *a) return false; } if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, 0, fns[a->esz]); + gen_gvec_ool_zzz(s, fns[a->esz], a->rd, a->rn, a->rm, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_TBL(DisasContext *s, arg_rrr_esz *a) }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, 0, fns[a->esz]); + gen_gvec_ool_zzz(s, fns[a->esz], a->rd, a->rn, a->rm, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool do_zzz_data_ool(DisasContext *s, arg_rrr_esz *a, int data, gen_helper_gvec_3 *fn) { if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, data, fn); + gen_gvec_ool_zzz(s, fn, a->rd, a->rn, a->rm, data); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_DOT_zzz(DisasContext *s, arg_DOT_zzz *a) }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, 0, fns[a->u][a->sz]); + gen_gvec_ool_zzz(s, fns[a->u][a->sz], a->rd, a->rn, a->rm, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_DOT_zzx(DisasContext *s, arg_DOT_zzx *a) }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vec_full_reg_offset(s, a->rm), - vsz, vsz, a->index, fns[a->u][a->sz]); + gen_gvec_ool_zzz(s, fns[a->u][a->sz], a->rd, a->rn, a->rm, a->index); } return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } +/* Invoke an out-of-line helper on 2 Zregs. */ +static void gen_gvec_ool_zz(DisasContext *s, gen_helper_gvec_2 *fn, + int rd, int rn, int data) +{ + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_2_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vsz, vsz, data, fn); +} + /* Invoke an out-of-line helper on 3 Zregs. */ static void gen_gvec_ool_zzz(DisasContext *s, gen_helper_gvec_3 *fn, int rd, int rn, int rm, int data) @@ -XXX,XX +XXX,XX @@ static bool trans_FEXPA(DisasContext *s, arg_rr_esz *a) return false; } if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_2_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vsz, vsz, 0, fns[a->esz]); + gen_gvec_ool_zz(s, fns[a->esz], a->rd, a->rn, 0); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_REV_v(DisasContext *s, arg_rr_esz *a) }; if (sve_access_check(s)) { - unsigned vsz = vec_full_reg_size(s); - tcg_gen_gvec_2_ool(vec_full_reg_offset(s, a->rd), - vec_full_reg_offset(s, a->rn), - vsz, vsz, 0, fns[a->esz]); + gen_gvec_ool_zz(s, fns[a->esz], a->rd, a->rn, 0); } return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than require the user to fill in the immediate (shl or shr), create full formats that include the immediate. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve.decode | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ @rd_rn_i6 ........ ... rn:5 ..... imm:s6 rd:5 &rri # Two register operand, one immediate operand, with predicate, -# element size encoded as TSZHL. User must fill in imm. -@rdn_pg_tszimm ........ .. ... ... ... pg:3 ..... rd:5 \ - &rpri_esz rn=%reg_movprfx esz=%tszimm_esz +# element size encoded as TSZHL. +@rdn_pg_tszimm_shl ........ .. ... ... ... pg:3 ..... rd:5 \ + &rpri_esz rn=%reg_movprfx esz=%tszimm_esz imm=%tszimm_shl +@rdn_pg_tszimm_shr ........ .. ... ... ... pg:3 ..... rd:5 \ + &rpri_esz rn=%reg_movprfx esz=%tszimm_esz imm=%tszimm_shr # Similarly without predicate. -@rd_rn_tszimm ........ .. ... ... ...... rn:5 rd:5 \ - &rri_esz esz=%tszimm16_esz +@rd_rn_tszimm_shl ........ .. ... ... ...... rn:5 rd:5 \ + &rri_esz esz=%tszimm16_esz imm=%tszimm16_shl +@rd_rn_tszimm_shr ........ .. ... ... ...... rn:5 rd:5 \ + &rri_esz esz=%tszimm16_esz imm=%tszimm16_shr # Two register operand, one immediate operand, with 4-bit predicate. # User must fill in imm. @@ -XXX,XX +XXX,XX @@ UMINV 00000100 .. 001 011 001 ... ..... ..... @rd_pg_rn ### SVE Shift by Immediate - Predicated Group # SVE bitwise shift by immediate (predicated) -ASR_zpzi 00000100 .. 000 000 100 ... .. ... ..... \ - @rdn_pg_tszimm imm=%tszimm_shr -LSR_zpzi 00000100 .. 000 001 100 ... .. ... ..... \ - @rdn_pg_tszimm imm=%tszimm_shr -LSL_zpzi 00000100 .. 000 011 100 ... .. ... ..... \ - @rdn_pg_tszimm imm=%tszimm_shl -ASRD 00000100 .. 000 100 100 ... .. ... ..... \ - @rdn_pg_tszimm imm=%tszimm_shr +ASR_zpzi 00000100 .. 000 000 100 ... .. ... ..... @rdn_pg_tszimm_shr +LSR_zpzi 00000100 .. 000 001 100 ... .. ... ..... @rdn_pg_tszimm_shr +LSL_zpzi 00000100 .. 000 011 100 ... .. ... ..... @rdn_pg_tszimm_shl +ASRD 00000100 .. 000 100 100 ... .. ... ..... @rdn_pg_tszimm_shr # SVE bitwise shift by vector (predicated) ASR_zpzz 00000100 .. 010 000 100 ... ..... ..... @rdn_pg_rm @@ -XXX,XX +XXX,XX @@ RDVL 00000100 101 11111 01010 imm:s6 rd:5 ### SVE Bitwise Shift - Unpredicated Group # SVE bitwise shift by immediate (unpredicated) -ASR_zzi 00000100 .. 1 ..... 1001 00 ..... ..... \ - @rd_rn_tszimm imm=%tszimm16_shr -LSR_zzi 00000100 .. 1 ..... 1001 01 ..... ..... \ - @rd_rn_tszimm imm=%tszimm16_shr -LSL_zzi 00000100 .. 1 ..... 1001 11 ..... ..... \ - @rd_rn_tszimm imm=%tszimm16_shl +ASR_zzi 00000100 .. 1 ..... 1001 00 ..... ..... @rd_rn_tszimm_shr +LSR_zzi 00000100 .. 1 ..... 1001 01 ..... ..... @rd_rn_tszimm_shr +LSL_zzi 00000100 .. 1 ..... 1001 11 ..... ..... @rd_rn_tszimm_shl # SVE bitwise shift by wide elements (unpredicated) # Note esz != 3 -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Unify add/sub helpers and add a parameter for rounding. This will allow saturating non-rounding to reuse this code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMM: fixed accidental use of '=' rather than '+=' in do_sqrdmlah_s] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vec_helper.c | 80 +++++++++++++++-------------------------- 1 file changed, 29 insertions(+), 51 deletions(-) diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #endif /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ -static int16_t inl_qrdmlah_s16(int16_t src1, int16_t src2, - int16_t src3, uint32_t *sat) +static int16_t do_sqrdmlah_h(int16_t src1, int16_t src2, int16_t src3, + bool neg, bool round, uint32_t *sat) { - /* Simplify: + /* + * Simplify: * = ((a3 << 16) + ((e1 * e2) << 1) + (1 << 15)) >> 16 * = ((a3 << 15) + (e1 * e2) + (1 << 14)) >> 15 */ int32_t ret = (int32_t)src1 * src2; - ret = ((int32_t)src3 << 15) + ret + (1 << 14); + if (neg) { + ret = -ret; + } + ret += ((int32_t)src3 << 15) + (round << 14); ret >>= 15; + if (ret != (int16_t)ret) { *sat = 1; - ret = (ret < 0 ? -0x8000 : 0x7fff); + ret = (ret < 0 ? INT16_MIN : INT16_MAX); } return ret; } @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, uint32_t src2, uint32_t src3) { uint32_t *sat = &env->vfp.qc[0]; - uint16_t e1 = inl_qrdmlah_s16(src1, src2, src3, sat); - uint16_t e2 = inl_qrdmlah_s16(src1 >> 16, src2 >> 16, src3 >> 16, sat); + uint16_t e1 = do_sqrdmlah_h(src1, src2, src3, false, true, sat); + uint16_t e2 = do_sqrdmlah_h(src1 >> 16, src2 >> 16, src3 >> 16, + false, true, sat); return deposit32(e1, 16, 16, e2); } @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlah_s16)(void *vd, void *vn, void *vm, uintptr_t i; for (i = 0; i < opr_sz / 2; ++i) { - d[i] = inl_qrdmlah_s16(n[i], m[i], d[i], vq); + d[i] = do_sqrdmlah_h(n[i], m[i], d[i], false, true, vq); } clear_tail(d, opr_sz, simd_maxsz(desc)); } -/* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ -static int16_t inl_qrdmlsh_s16(int16_t src1, int16_t src2, - int16_t src3, uint32_t *sat) -{ - /* Similarly, using subtraction: - * = ((a3 << 16) - ((e1 * e2) << 1) + (1 << 15)) >> 16 - * = ((a3 << 15) - (e1 * e2) + (1 << 14)) >> 15 - */ - int32_t ret = (int32_t)src1 * src2; - ret = ((int32_t)src3 << 15) - ret + (1 << 14); - ret >>= 15; - if (ret != (int16_t)ret) { - *sat = 1; - ret = (ret < 0 ? -0x8000 : 0x7fff); - } - return ret; -} - uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, uint32_t src2, uint32_t src3) { uint32_t *sat = &env->vfp.qc[0]; - uint16_t e1 = inl_qrdmlsh_s16(src1, src2, src3, sat); - uint16_t e2 = inl_qrdmlsh_s16(src1 >> 16, src2 >> 16, src3 >> 16, sat); + uint16_t e1 = do_sqrdmlah_h(src1, src2, src3, true, true, sat); + uint16_t e2 = do_sqrdmlah_h(src1 >> 16, src2 >> 16, src3 >> 16, + true, true, sat); return deposit32(e1, 16, 16, e2); } @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, uintptr_t i; for (i = 0; i < opr_sz / 2; ++i) { - d[i] = inl_qrdmlsh_s16(n[i], m[i], d[i], vq); + d[i] = do_sqrdmlah_h(n[i], m[i], d[i], true, true, vq); } clear_tail(d, opr_sz, simd_maxsz(desc)); } /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ -static int32_t inl_qrdmlah_s32(int32_t src1, int32_t src2, - int32_t src3, uint32_t *sat) +static int32_t do_sqrdmlah_s(int32_t src1, int32_t src2, int32_t src3, + bool neg, bool round, uint32_t *sat) { /* Simplify similarly to int_qrdmlah_s16 above. */ int64_t ret = (int64_t)src1 * src2; - ret = ((int64_t)src3 << 31) + ret + (1 << 30); + if (neg) { + ret = -ret; + } + ret += ((int64_t)src3 << 31) + (round << 30); ret >>= 31; + if (ret != (int32_t)ret) { *sat = 1; ret = (ret < 0 ? INT32_MIN : INT32_MAX); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) { uint32_t *sat = &env->vfp.qc[0]; - return inl_qrdmlah_s32(src1, src2, src3, sat); + return do_sqrdmlah_s(src1, src2, src3, false, true, sat); } void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, uintptr_t i; for (i = 0; i < opr_sz / 4; ++i) { - d[i] = inl_qrdmlah_s32(n[i], m[i], d[i], vq); + d[i] = do_sqrdmlah_s(n[i], m[i], d[i], false, true, vq); } clear_tail(d, opr_sz, simd_maxsz(desc)); } -/* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ -static int32_t inl_qrdmlsh_s32(int32_t src1, int32_t src2, - int32_t src3, uint32_t *sat) -{ - /* Simplify similarly to int_qrdmlsh_s16 above. */ - int64_t ret = (int64_t)src1 * src2; - ret = ((int64_t)src3 << 31) - ret + (1 << 30); - ret >>= 31; - if (ret != (int32_t)ret) { - *sat = 1; - ret = (ret < 0 ? INT32_MIN : INT32_MAX); - } - return ret; -} - uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) { uint32_t *sat = &env->vfp.qc[0]; - return inl_qrdmlsh_s32(src1, src2, src3, sat); + return do_sqrdmlah_s(src1, src2, src3, true, true, sat); } void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, uintptr_t i; for (i = 0; i < opr_sz / 4; ++i) { - d[i] = inl_qrdmlsh_s32(n[i], m[i], d[i], vq); + d[i] = do_sqrdmlah_s(n[i], m[i], d[i], true, true, vq); } clear_tail(d, opr_sz, simd_maxsz(desc)); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 4 ++++ target/arm/translate-a64.c | 16 ++++++++++++++++ target/arm/vec_helper.c | 29 +++++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(gvec_uaba_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_uaba_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_uaba_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_mul_idx_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_mul_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_mul_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) data, gen_helper_gvec_fmlal_idx_a64); } return; + + case 0x08: /* MUL */ + if (!is_long && !is_scalar) { + static gen_helper_gvec_3 * const fns[3] = { + gen_helper_gvec_mul_idx_h, + gen_helper_gvec_mul_idx_s, + gen_helper_gvec_mul_idx_d, + }; + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + is_q ? 16 : 8, vec_full_reg_size(s), + index, fns[size - 1]); + return; + } + break; } if (size == 3) { diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ DO_3OP(gvec_rsqrts_d, helper_rsqrtsf_f64, float64) */ #define DO_MUL_IDX(NAME, TYPE, H) \ +void HELPER(NAME)(void *vd, void *vn, void *vm, uint32_t desc) \ +{ \ + intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE); \ + intptr_t idx = simd_data(desc); \ + TYPE *d = vd, *n = vn, *m = vm; \ + for (i = 0; i < oprsz / sizeof(TYPE); i += segment) { \ + TYPE mm = m[H(i + idx)]; \ + for (j = 0; j < segment; j++) { \ + d[i + j] = n[i + j] * mm; \ + } \ + } \ + clear_tail(d, oprsz, simd_maxsz(desc)); \ +} + +DO_MUL_IDX(gvec_mul_idx_h, uint16_t, H2) +DO_MUL_IDX(gvec_mul_idx_s, uint32_t, H4) +DO_MUL_IDX(gvec_mul_idx_d, uint64_t, ) + +#undef DO_MUL_IDX + +#define DO_FMUL_IDX(NAME, TYPE, H) \ void HELPER(NAME)(void *vd, void *vn, void *vm, void *stat, uint32_t desc) \ { \ intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE); \ @@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vm, void *stat, uint32_t desc) \ clear_tail(d, oprsz, simd_maxsz(desc)); \ } -DO_MUL_IDX(gvec_fmul_idx_h, float16, H2) -DO_MUL_IDX(gvec_fmul_idx_s, float32, H4) -DO_MUL_IDX(gvec_fmul_idx_d, float64, ) +DO_FMUL_IDX(gvec_fmul_idx_h, float16, H2) +DO_FMUL_IDX(gvec_fmul_idx_s, float32, H4) +DO_FMUL_IDX(gvec_fmul_idx_d, float64, ) -#undef DO_MUL_IDX +#undef DO_FMUL_IDX #define DO_FMLA_IDX(NAME, TYPE, H) \ void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 14 ++++++++++++++ target/arm/translate-a64.c | 34 ++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 25 +++++++++++++++++++++++++ 3 files changed, 73 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(gvec_mul_idx_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_mul_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_mul_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mla_idx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mla_idx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mla_idx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(gvec_mls_idx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mls_idx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_mls_idx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; + + case 0x10: /* MLA */ + if (!is_long && !is_scalar) { + static gen_helper_gvec_4 * const fns[3] = { + gen_helper_gvec_mla_idx_h, + gen_helper_gvec_mla_idx_s, + gen_helper_gvec_mla_idx_d, + }; + tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + vec_full_reg_offset(s, rd), + is_q ? 16 : 8, vec_full_reg_size(s), + index, fns[size - 1]); + return; + } + break; + + case 0x14: /* MLS */ + if (!is_long && !is_scalar) { + static gen_helper_gvec_4 * const fns[3] = { + gen_helper_gvec_mls_idx_h, + gen_helper_gvec_mls_idx_s, + gen_helper_gvec_mls_idx_d, + }; + tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + vec_full_reg_offset(s, rd), + is_q ? 16 : 8, vec_full_reg_size(s), + index, fns[size - 1]); + return; + } + break; } if (size == 3) { diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ DO_MUL_IDX(gvec_mul_idx_d, uint64_t, ) #undef DO_MUL_IDX +#define DO_MLA_IDX(NAME, TYPE, OP, H) \ +void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc) \ +{ \ + intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE); \ + intptr_t idx = simd_data(desc); \ + TYPE *d = vd, *n = vn, *m = vm, *a = va; \ + for (i = 0; i < oprsz / sizeof(TYPE); i += segment) { \ + TYPE mm = m[H(i + idx)]; \ + for (j = 0; j < segment; j++) { \ + d[i + j] = a[i + j] OP n[i + j] * mm; \ + } \ + } \ + clear_tail(d, oprsz, simd_maxsz(desc)); \ +} + +DO_MLA_IDX(gvec_mla_idx_h, uint16_t, +, H2) +DO_MLA_IDX(gvec_mla_idx_s, uint32_t, +, H4) +DO_MLA_IDX(gvec_mla_idx_d, uint64_t, +, ) + +DO_MLA_IDX(gvec_mls_idx_h, uint16_t, -, H2) +DO_MLA_IDX(gvec_mls_idx_s, uint32_t, -, H4) +DO_MLA_IDX(gvec_mls_idx_d, uint64_t, -, ) + +#undef DO_MLA_IDX + #define DO_FMUL_IDX(NAME, TYPE, H) \ void HELPER(NAME)(void *vd, void *vn, void *vm, void *stat, uint32_t desc) \ { \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200815013145.539409-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 10 ++++++++ target/arm/translate-a64.c | 33 ++++++++++++++++++-------- target/arm/vec_helper.c | 48 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 81 insertions(+), 10 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_mls_idx_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_mls_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(neon_sqdmulh_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(neon_sqdmulh_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(neon_sqrdmulh_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(neon_sqrdmulh_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3_fpst(DisasContext *s, bool is_q, int rd, int rn, tcg_temp_free_ptr(fpst); } +/* Expand a 3-operand + qc + operation using an out-of-line helper. */ +static void gen_gvec_op3_qc(DisasContext *s, bool is_q, int rd, int rn, + int rm, gen_helper_gvec_3_ptr *fn) +{ + TCGv_ptr qc_ptr = tcg_temp_new_ptr(); + + tcg_gen_addi_ptr(qc_ptr, cpu_env, offsetof(CPUARMState, vfp.qc)); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), qc_ptr, + is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); + tcg_temp_free_ptr(qc_ptr); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn) gen_gvec_fn3(s, is_q, rd, rn, rm, gen_gvec_mla, size); } return; + case 0x16: /* SQDMULH, SQRDMULH */ + { + static gen_helper_gvec_3_ptr * const fns[2][2] = { + { gen_helper_neon_sqdmulh_h, gen_helper_neon_sqrdmulh_h }, + { gen_helper_neon_sqdmulh_s, gen_helper_neon_sqrdmulh_s }, + }; + gen_gvec_op3_qc(s, is_q, rd, rn, rm, fns[size - 1][u]); + } + return; case 0x11: if (!u) { /* CMTST */ gen_gvec_fn3(s, is_q, rd, rn, rm, gen_gvec_cmtst, size); @@ -XXX,XX +XXX,XX @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn) genenvfn = fns[size][u]; break; } - case 0x16: /* SQDMULH, SQRDMULH */ - { - static NeonGenTwoOpEnvFn * const fns[2][2] = { - { gen_helper_neon_qdmulh_s16, gen_helper_neon_qrdmulh_s16 }, - { gen_helper_neon_qdmulh_s32, gen_helper_neon_qrdmulh_s32 }, - }; - assert(size == 1 || size == 2); - genenvfn = fns[size - 1][u]; - break; - } default: g_assert_not_reached(); } diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, clear_tail(d, opr_sz, simd_maxsz(desc)); } +void HELPER(neon_sqdmulh_h)(void *vd, void *vn, void *vm, + void *vq, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + int16_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = do_sqrdmlah_h(n[i], m[i], 0, false, false, vq); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(neon_sqrdmulh_h)(void *vd, void *vn, void *vm, + void *vq, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + int16_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = do_sqrdmlah_h(n[i], m[i], 0, false, true, vq); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ static int32_t do_sqrdmlah_s(int32_t src1, int32_t src2, int32_t src3, bool neg, bool round, uint32_t *sat) @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, clear_tail(d, opr_sz, simd_maxsz(desc)); } +void HELPER(neon_sqdmulh_s)(void *vd, void *vn, void *vm, + void *vq, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + int32_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = do_sqrdmlah_s(n[i], m[i], 0, false, false, vq); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(neon_sqrdmulh_s)(void *vd, void *vn, void *vm, + void *vq, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + int32_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = do_sqrdmlah_s(n[i], m[i], 0, false, true, vq); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Integer 8 and 16-bit dot-product. * * Note that for the loops herein, host endianness does not matter -- 2.20.1 Arm queue; not huge but I figured I might as well send it out since I've been doing code review today and there's no queue of unprocessed pullreqs... thanks -- PMM The following changes since commit b3f846c59d8405bb87c551187721fc92ff2f1b92: Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-01-11v2' into staging (2021-01-11 15:15:35 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210112 for you to fetch changes up to 19d131395ccaf503db21dadd8257e6dc9fc1d7de: ui/cocoa: Fix openFile: deprecation on Big Sur (2021-01-12 11:38:37 +0000) ---------------------------------------------------------------- target-arm queue: * arm: Support emulation of ARMv8.4-TTST extension * arm: Update cpu.h ID register field definitions * arm: Fix breakage of XScale instruction emulation * hw/net/lan9118: Fix RX Status FIFO PEEK value * npcm7xx: Add ADC and PWM emulation * ui/cocoa: Make "open docs" help menu entry work again when binary is run from the build tree * ui/cocoa: Fix openFile: deprecation on Big Sur * docs: Add qemu-storage-daemon(1) manpage to meson.build * docs: Build and install all the docs in a single manual ---------------------------------------------------------------- Hao Wu (6): hw/misc: Add clock converter in NPCM7XX CLK module hw/timer: Refactor NPCM7XX Timer to use CLK clock hw/adc: Add an ADC module for NPCM7XX hw/misc: Add a PWM module for NPCM7XX hw/misc: Add QTest for NPCM7XX PWM Module hw/*: Use type casting for SysBusDevice in NPCM7XX Leif Lindholm (6): target/arm: fix typo in cpu.h ID_AA64PFR1 field name target/arm: make ARMCPU.clidr 64-bit target/arm: make ARMCPU.ctr 64-bit target/arm: add descriptions of CLIDR_EL1, CCSIDR_EL1, CTR_EL0 to cpu.h target/arm: add aarch64 ID register fields to cpu.h target/arm: add aarch32 ID register fields to cpu.h Peter Maydell (5): docs: Add qemu-storage-daemon(1) manpage to meson.build docs: Build and install all the docs in a single manual target/arm: Don't decode insns in the XScale/iWMMXt space as cp insns hw/net/lan9118: Fix RX Status FIFO PEEK value hw/net/lan9118: Add symbolic constants for register offsets Roman Bolshakov (2): ui/cocoa: Update path to docs in build tree ui/cocoa: Fix openFile: deprecation on Big Sur Rémi Denis-Courmont (2): target/arm: ARMv8.4-TTST extension target/arm: enable Small Translation tables in max CPU docs/conf.py | 46 ++- docs/devel/conf.py | 15 - docs/index.html.in | 17 - docs/interop/conf.py | 28 -- docs/meson.build | 65 ++-- docs/specs/conf.py | 16 - docs/system/arm/nuvoton.rst | 4 +- docs/system/conf.py | 28 -- docs/tools/conf.py | 37 -- docs/user/conf.py | 15 - meson.build | 1 + hw/adc/trace.h | 1 + include/hw/adc/npcm7xx_adc.h | 69 ++++ include/hw/arm/npcm7xx.h | 4 + include/hw/misc/npcm7xx_clk.h | 146 ++++++- include/hw/misc/npcm7xx_pwm.h | 105 +++++ include/hw/timer/npcm7xx_timer.h | 1 + target/arm/cpu.h | 85 ++++- hw/adc/npcm7xx_adc.c | 301 +++++++++++++++ hw/arm/npcm7xx.c | 55 ++- hw/arm/npcm7xx_boards.c | 2 +- hw/mem/npcm7xx_mc.c | 2 +- hw/misc/npcm7xx_clk.c | 807 ++++++++++++++++++++++++++++++++++++++- hw/misc/npcm7xx_gcr.c | 2 +- hw/misc/npcm7xx_pwm.c | 550 ++++++++++++++++++++++++++ hw/misc/npcm7xx_rng.c | 2 +- hw/net/lan9118.c | 26 +- hw/nvram/npcm7xx_otp.c | 2 +- hw/ssi/npcm7xx_fiu.c | 2 +- hw/timer/npcm7xx_timer.c | 39 +- target/arm/cpu64.c | 1 + target/arm/helper.c | 15 +- target/arm/translate.c | 7 + tests/qtest/npcm7xx_adc-test.c | 377 ++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 490 ++++++++++++++++++++++++ hw/adc/meson.build | 1 + hw/adc/trace-events | 5 + hw/misc/meson.build | 1 + hw/misc/trace-events | 6 + tests/qtest/meson.build | 4 +- ui/cocoa.m | 7 +- 41 files changed, 3124 insertions(+), 263 deletions(-) delete mode 100644 docs/devel/conf.py delete mode 100644 docs/index.html.in delete mode 100644 docs/interop/conf.py delete mode 100644 docs/specs/conf.py delete mode 100644 docs/system/conf.py delete mode 100644 docs/tools/conf.py delete mode 100644 docs/user/conf.py create mode 100644 hw/adc/trace.h create mode 100644 include/hw/adc/npcm7xx_adc.h create mode 100644 include/hw/misc/npcm7xx_pwm.h create mode 100644 hw/adc/npcm7xx_adc.c create mode 100644 hw/misc/npcm7xx_pwm.c create mode 100644 tests/qtest/npcm7xx_adc-test.c create mode 100644 tests/qtest/npcm7xx_pwm-test.c create mode 100644 hw/adc/trace-events From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> This adds for the Small Translation tables extension in AArch64 state. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 +++++ target/arm/helper.c | 15 +++++++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_uao(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, UAO) != 0; } +static inline bool isar_feature_aa64_st(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, ST) != 0; +} + static inline bool isar_feature_aa64_bti(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, BT) != 0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, { uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; bool epd, hpd, using16k, using64k; - int select, tsz, tbi; + int select, tsz, tbi, max_tsz; if (!regime_has_2_ranges(mmu_idx)) { select = 0; @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, hpd = extract64(tcr, 42, 1); } } - tsz = MIN(tsz, 39); /* TODO: ARMv8.4-TTST */ + + if (cpu_isar_feature(aa64_st, env_archcpu(env))) { + max_tsz = 48 - using64k; + } else { + max_tsz = 39; + } + + tsz = MIN(tsz, max_tsz); tsz = MAX(tsz, 16); /* TODO: ARMv8.2-LVA */ /* Present TBI as a composite with TBID. */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, if (!aarch64 || stride == 9) { /* AArch32 or 4KB pages */ startlevel = 2 - sl0; + + if (cpu_isar_feature(aa64_st, cpu)) { + startlevel &= 3; + } } else { /* 16KB or 64KB pages */ startlevel = 3 - sl0; -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ + t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* TTST */ cpu->isar.id_aa64mmfr2 = t; /* Replicate the same data to the 32-bit id registers. */ -- 2.20.1 From: Leif Lindholm <leif@nuviainc.com> SBSS -> SSBS Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20210108185154.8108-2-leif@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64PFR0, RAS, 28, 4) FIELD(ID_AA64PFR0, SVE, 32, 4) FIELD(ID_AA64PFR1, BT, 0, 4) -FIELD(ID_AA64PFR1, SBSS, 4, 4) +FIELD(ID_AA64PFR1, SSBS, 4, 4) FIELD(ID_AA64PFR1, MTE, 8, 4) FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4) -- 2.20.1 From: Leif Lindholm <leif@nuviainc.com> The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit 32, as well as adding a Ttype<n> field when FEAT_MTE is implemented. Extend the clidr field to be able to hold this context. Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20210108185154.8108-3-leif@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_afr0; uint64_t id_aa64afr0; uint64_t id_aa64afr1; - uint32_t clidr; + uint64_t clidr; uint64_t mp_affinity; /* MP ID without feature bits */ /* The elements of this array are the CCSIDR values for each cache, * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc. -- 2.20.1 From: Leif Lindholm <leif@nuviainc.com> When FEAT_MTE is implemented, the AArch64 view of CTR_EL0 adds the TminLine field in bits [37:32]. Extend the ctr field to be able to hold this context. Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20210108185154.8108-4-leif@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint64_t midr; uint32_t revidr; uint32_t reset_fpsid; - uint32_t ctr; + uint64_t ctr; uint32_t reset_sctlr; uint64_t pmceid0; uint64_t pmceid1; -- 2.20.1 From: Leif Lindholm <leif@nuviainc.com> Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20210108185154.8108-5-leif@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(V7M_FPCCR, ASPEN, 31, 1) /* * System register ID fields. */ +FIELD(CLIDR_EL1, CTYPE1, 0, 3) +FIELD(CLIDR_EL1, CTYPE2, 3, 3) +FIELD(CLIDR_EL1, CTYPE3, 6, 3) +FIELD(CLIDR_EL1, CTYPE4, 9, 3) +FIELD(CLIDR_EL1, CTYPE5, 12, 3) +FIELD(CLIDR_EL1, CTYPE6, 15, 3) +FIELD(CLIDR_EL1, CTYPE7, 18, 3) +FIELD(CLIDR_EL1, LOUIS, 21, 3) +FIELD(CLIDR_EL1, LOC, 24, 3) +FIELD(CLIDR_EL1, LOUU, 27, 3) +FIELD(CLIDR_EL1, ICB, 30, 3) + +/* When FEAT_CCIDX is implemented */ +FIELD(CCSIDR_EL1, CCIDX_LINESIZE, 0, 3) +FIELD(CCSIDR_EL1, CCIDX_ASSOCIATIVITY, 3, 21) +FIELD(CCSIDR_EL1, CCIDX_NUMSETS, 32, 24) + +/* When FEAT_CCIDX is not implemented */ +FIELD(CCSIDR_EL1, LINESIZE, 0, 3) +FIELD(CCSIDR_EL1, ASSOCIATIVITY, 3, 10) +FIELD(CCSIDR_EL1, NUMSETS, 13, 15) + +FIELD(CTR_EL0, IMINLINE, 0, 4) +FIELD(CTR_EL0, L1IP, 14, 2) +FIELD(CTR_EL0, DMINLINE, 16, 4) +FIELD(CTR_EL0, ERG, 20, 4) +FIELD(CTR_EL0, CWG, 24, 4) +FIELD(CTR_EL0, IDC, 28, 1) +FIELD(CTR_EL0, DIC, 29, 1) +FIELD(CTR_EL0, TMINLINE, 32, 6) + FIELD(MIDR_EL1, REVISION, 0, 4) FIELD(MIDR_EL1, PARTNUM, 4, 12) FIELD(MIDR_EL1, ARCHITECTURE, 16, 4) -- 2.20.1 From: Leif Lindholm <leif@nuviainc.com> Add entries present in ARM DDI 0487F.c (August 2020). Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20210108185154.8108-6-leif@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64ISAR1, GPI, 28, 4) FIELD(ID_AA64ISAR1, FRINTTS, 32, 4) FIELD(ID_AA64ISAR1, SB, 36, 4) FIELD(ID_AA64ISAR1, SPECRES, 40, 4) +FIELD(ID_AA64ISAR1, BF16, 44, 4) +FIELD(ID_AA64ISAR1, DGH, 48, 4) +FIELD(ID_AA64ISAR1, I8MM, 52, 4) FIELD(ID_AA64PFR0, EL0, 0, 4) FIELD(ID_AA64PFR0, EL1, 4, 4) @@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64PFR0, ADVSIMD, 20, 4) FIELD(ID_AA64PFR0, GIC, 24, 4) FIELD(ID_AA64PFR0, RAS, 28, 4) FIELD(ID_AA64PFR0, SVE, 32, 4) +FIELD(ID_AA64PFR0, SEL2, 36, 4) +FIELD(ID_AA64PFR0, MPAM, 40, 4) +FIELD(ID_AA64PFR0, AMU, 44, 4) +FIELD(ID_AA64PFR0, DIT, 48, 4) +FIELD(ID_AA64PFR0, CSV2, 56, 4) +FIELD(ID_AA64PFR0, CSV3, 60, 4) FIELD(ID_AA64PFR1, BT, 0, 4) FIELD(ID_AA64PFR1, SSBS, 4, 4) FIELD(ID_AA64PFR1, MTE, 8, 4) FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4) +FIELD(ID_AA64PFR1, MPAM_FRAC, 16, 4) FIELD(ID_AA64MMFR0, PARANGE, 0, 4) FIELD(ID_AA64MMFR0, ASIDBITS, 4, 4) @@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR0, TGRAN16_2, 32, 4) FIELD(ID_AA64MMFR0, TGRAN64_2, 36, 4) FIELD(ID_AA64MMFR0, TGRAN4_2, 40, 4) FIELD(ID_AA64MMFR0, EXS, 44, 4) +FIELD(ID_AA64MMFR0, FGT, 56, 4) +FIELD(ID_AA64MMFR0, ECV, 60, 4) FIELD(ID_AA64MMFR1, HAFDBS, 0, 4) FIELD(ID_AA64MMFR1, VMIDBITS, 4, 4) @@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR1, LO, 16, 4) FIELD(ID_AA64MMFR1, PAN, 20, 4) FIELD(ID_AA64MMFR1, SPECSEI, 24, 4) FIELD(ID_AA64MMFR1, XNX, 28, 4) +FIELD(ID_AA64MMFR1, TWED, 32, 4) +FIELD(ID_AA64MMFR1, ETS, 36, 4) FIELD(ID_AA64MMFR2, CNP, 0, 4) FIELD(ID_AA64MMFR2, UAO, 4, 4) @@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64DFR0, CTX_CMPS, 28, 4) FIELD(ID_AA64DFR0, PMSVER, 32, 4) FIELD(ID_AA64DFR0, DOUBLELOCK, 36, 4) FIELD(ID_AA64DFR0, TRACEFILT, 40, 4) +FIELD(ID_AA64DFR0, MTPMU, 48, 4) FIELD(ID_DFR0, COPDBG, 0, 4) FIELD(ID_DFR0, COPSDBG, 4, 4) -- 2.20.1 From: Leif Lindholm <leif@nuviainc.com> Add entries present in ARM DDI 0487F.c (August 2020). Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20210108185154.8108-7-leif@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(ID_ISAR6, DP, 4, 4) FIELD(ID_ISAR6, FHM, 8, 4) FIELD(ID_ISAR6, SB, 12, 4) FIELD(ID_ISAR6, SPECRES, 16, 4) +FIELD(ID_ISAR6, BF16, 20, 4) +FIELD(ID_ISAR6, I8MM, 24, 4) FIELD(ID_MMFR0, VMSA, 0, 4) FIELD(ID_MMFR0, PMSA, 4, 4) @@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR0, AUXREG, 20, 4) FIELD(ID_MMFR0, FCSE, 24, 4) FIELD(ID_MMFR0, INNERSHR, 28, 4) +FIELD(ID_MMFR1, L1HVDVA, 0, 4) +FIELD(ID_MMFR1, L1UNIVA, 4, 4) +FIELD(ID_MMFR1, L1HVDSW, 8, 4) +FIELD(ID_MMFR1, L1UNISW, 12, 4) +FIELD(ID_MMFR1, L1HVD, 16, 4) +FIELD(ID_MMFR1, L1UNI, 20, 4) +FIELD(ID_MMFR1, L1TSTCLN, 24, 4) +FIELD(ID_MMFR1, BPRED, 28, 4) + +FIELD(ID_MMFR2, L1HVDFG, 0, 4) +FIELD(ID_MMFR2, L1HVDBG, 4, 4) +FIELD(ID_MMFR2, L1HVDRNG, 8, 4) +FIELD(ID_MMFR2, HVDTLB, 12, 4) +FIELD(ID_MMFR2, UNITLB, 16, 4) +FIELD(ID_MMFR2, MEMBARR, 20, 4) +FIELD(ID_MMFR2, WFISTALL, 24, 4) +FIELD(ID_MMFR2, HWACCFLG, 28, 4) + FIELD(ID_MMFR3, CMAINTVA, 0, 4) FIELD(ID_MMFR3, CMAINTSW, 4, 4) FIELD(ID_MMFR3, BPMAINT, 8, 4) @@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR4, LSM, 20, 4) FIELD(ID_MMFR4, CCIDX, 24, 4) FIELD(ID_MMFR4, EVT, 28, 4) +FIELD(ID_MMFR5, ETS, 0, 4) + FIELD(ID_PFR0, STATE0, 0, 4) FIELD(ID_PFR0, STATE1, 4, 4) FIELD(ID_PFR0, STATE2, 8, 4) @@ -XXX,XX +XXX,XX @@ FIELD(ID_PFR1, SEC_FRAC, 20, 4) FIELD(ID_PFR1, VIRT_FRAC, 24, 4) FIELD(ID_PFR1, GIC, 28, 4) +FIELD(ID_PFR2, CSV3, 0, 4) +FIELD(ID_PFR2, SSBS, 4, 4) +FIELD(ID_PFR2, RAS_FRAC, 8, 4) + FIELD(ID_AA64ISAR0, AES, 4, 4) FIELD(ID_AA64ISAR0, SHA1, 8, 4) FIELD(ID_AA64ISAR0, SHA2, 12, 4) @@ -XXX,XX +XXX,XX @@ FIELD(ID_DFR0, MPROFDBG, 20, 4) FIELD(ID_DFR0, PERFMON, 24, 4) FIELD(ID_DFR0, TRACEFILT, 28, 4) +FIELD(ID_DFR1, MTPMU, 0, 4) + FIELD(DBGDIDR, SE_IMP, 12, 1) FIELD(DBGDIDR, NSUHD_IMP, 14, 1) FIELD(DBGDIDR, VERSION, 16, 4) -- 2.20.1 From: Roman Bolshakov <r.bolshakov@yadro.com> QEMU documentation can't be opened if QEMU is run from build tree because executables are placed in the top of build tree after conversion to meson. Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210108213815.64678-1-r.bolshakov@yadro.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- ui/cocoa.m | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ui/cocoa.m b/ui/cocoa.m index XXXXXXX..XXXXXXX 100644 --- a/ui/cocoa.m +++ b/ui/cocoa.m @@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView; - (void) openDocumentation: (NSString *) filename { /* Where to look for local files */ - NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"../docs/"}; + NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"}; NSString *full_file_path; /* iterate thru the possible paths until the file is found */ -- 2.20.1 In commit 1982e1602d15 we added a new qemu-storage-daemon(1) manpage. At the moment new manpages have to be listed both in the conf.py for Sphinx and also in docs/meson.build for Meson. We forgot the second of those -- correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210108161416.21129-2-peter.maydell@linaro.org --- docs/meson.build | 1 + 1 file changed, 1 insertion(+) diff --git a/docs/meson.build b/docs/meson.build index XXXXXXX..XXXXXXX 100644 --- a/docs/meson.build +++ b/docs/meson.build @@ -XXX,XX +XXX,XX @@ if build_docs 'qemu-img.1': (have_tools ? 'man1' : ''), 'qemu-nbd.8': (have_tools ? 'man8' : ''), 'qemu-pr-helper.8': (have_tools ? 'man8' : ''), + 'qemu-storage-daemon.1': (have_tools ? 'man1' : ''), 'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''), 'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''), 'virtiofsd.1': (have_virtiofsd ? 'man1' : ''), -- 2.20.1 When we first converted our documentation to Sphinx, we split it into multiple manuals (system, interop, tools, etc), which are all built separately. The primary driver for this was wanting to be able to avoid shipping the 'devel' manual to end-users. However, this is working against the grain of the way Sphinx wants to be used and causes some annoyances: * Cross-references between documents become much harder or possibly impossible * There is no single index to the whole documentation * Within one manual there's no links or table-of-contents info that lets you easily navigate to the others * The devel manual doesn't get published on the QEMU website (it would be nice to able to refer to it there) Merely hiding our developer documentation from end users seems like it's not enough benefit for these costs. Combine all the documentation into a single manual (the same way that the readthedocs site builds it) and install the whole thing. The previous manual divisions remain as the new top level sections in the manual. * The per-manual conf.py files are no longer needed * The man_pages[] specifications previously in each per-manual conf.py move to the top level conf.py * docs/meson.build logic is simplified as we now only need to run Sphinx once for the HTML and then once for the manpages5B * The old index.html.in that produced the top-level page with links to each manual is no longer needed Unfortunately this means that we now have to build the HTML documentation into docs/manual in the build tree rather than directly into docs/; otherwise it is too awkward to ensure we install only the built manual and not also the dependency info, stamp file, etc. The manual still ends up in the same place in the final installed directory, but anybody who was consulting documentation from within the build tree will have to adjust where they're looking. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210108161416.21129-3-peter.maydell@linaro.org --- docs/conf.py | 46 ++++++++++++++++++++++++++++++- docs/devel/conf.py | 15 ----------- docs/index.html.in | 17 ------------ docs/interop/conf.py | 28 ------------------- docs/meson.build | 64 +++++++++++++++++--------------------------- docs/specs/conf.py | 16 ----------- docs/system/conf.py | 28 ------------------- docs/tools/conf.py | 37 ------------------------- docs/user/conf.py | 15 ----------- 9 files changed, 70 insertions(+), 196 deletions(-) delete mode 100644 docs/devel/conf.py delete mode 100644 docs/index.html.in delete mode 100644 docs/interop/conf.py delete mode 100644 docs/specs/conf.py delete mode 100644 docs/system/conf.py delete mode 100644 docs/tools/conf.py delete mode 100644 docs/user/conf.py diff --git a/docs/conf.py b/docs/conf.py index XXXXXXX..XXXXXXX 100644 --- a/docs/conf.py +++ b/docs/conf.py @@ -XXX,XX +XXX,XX @@ latex_documents = [ # -- Options for manual page output --------------------------------------- # Individual manual/conf.py can override this to create man pages -man_pages = [] +man_pages = [ + ('interop/qemu-ga', 'qemu-ga', + 'QEMU Guest Agent', + ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8), + ('interop/qemu-ga-ref', 'qemu-ga-ref', + 'QEMU Guest Agent Protocol Reference', + [], 7), + ('interop/qemu-qmp-ref', 'qemu-qmp-ref', + 'QEMU QMP Reference Manual', + [], 7), + ('interop/qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref', + 'QEMU Storage Daemon QMP Reference Manual', + [], 7), + ('system/qemu-manpage', 'qemu', + 'QEMU User Documentation', + ['Fabrice Bellard'], 1), + ('system/qemu-block-drivers', 'qemu-block-drivers', + 'QEMU block drivers reference', + ['Fabrice Bellard and the QEMU Project developers'], 7), + ('system/qemu-cpu-models', 'qemu-cpu-models', + 'QEMU CPU Models', + ['The QEMU Project developers'], 7), + ('tools/qemu-img', 'qemu-img', + 'QEMU disk image utility', + ['Fabrice Bellard'], 1), + ('tools/qemu-nbd', 'qemu-nbd', + 'QEMU Disk Network Block Device Server', + ['Anthony Liguori <anthony@codemonkey.ws>'], 8), + ('tools/qemu-pr-helper', 'qemu-pr-helper', + 'QEMU persistent reservation helper', + [], 8), + ('tools/qemu-storage-daemon', 'qemu-storage-daemon', + 'QEMU storage daemon', + [], 1), + ('tools/qemu-trace-stap', 'qemu-trace-stap', + 'QEMU SystemTap trace tool', + [], 1), + ('tools/virtfs-proxy-helper', 'virtfs-proxy-helper', + 'QEMU 9p virtfs proxy filesystem helper', + ['M. Mohan Kumar'], 1), + ('tools/virtiofsd', 'virtiofsd', + 'QEMU virtio-fs shared file system daemon', + ['Stefan Hajnoczi <stefanha@redhat.com>', + 'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1), +] # -- Options for Texinfo output ------------------------------------------- diff --git a/docs/devel/conf.py b/docs/devel/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/devel/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'devel' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = u'Developer''s Guide' diff --git a/docs/index.html.in b/docs/index.html.in deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/index.html.in +++ /dev/null @@ -XXX,XX +XXX,XX @@ -<!DOCTYPE html> -<html lang="en"> - <head> - <meta charset="UTF-8"> - <title>QEMU @VERSION@ Documentation</title> - </head> - <body> - <h1>QEMU @VERSION@ Documentation</h1> - <ul> - <li><a href="system/index.html">System Emulation User's Guide</a></li> - <li><a href="user/index.html">User Mode Emulation User's Guide</a></li> - <li><a href="tools/index.html">Tools Guide</a></li> - <li><a href="interop/index.html">System Emulation Management and Interoperability Guide</a></li> - <li><a href="specs/index.html">System Emulation Guest Hardware Specifications</a></li> - </ul> - </body> -</html> diff --git a/docs/interop/conf.py b/docs/interop/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/interop/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'interop' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = u'System Emulation Management and Interoperability Guide' - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('qemu-ga', 'qemu-ga', u'QEMU Guest Agent', - ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8), - ('qemu-ga-ref', 'qemu-ga-ref', 'QEMU Guest Agent Protocol Reference', - [], 7), - ('qemu-qmp-ref', 'qemu-qmp-ref', 'QEMU QMP Reference Manual', - [], 7), - ('qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref', - 'QEMU Storage Daemon QMP Reference Manual', [], 7), -] diff --git a/docs/meson.build b/docs/meson.build index XXXXXXX..XXXXXXX 100644 --- a/docs/meson.build +++ b/docs/meson.build @@ -XXX,XX +XXX,XX @@ if build_docs meson.source_root() / 'docs/sphinx/qmp_lexer.py', qapi_gen_depends ] - configure_file(output: 'index.html', - input: files('index.html.in'), - configuration: {'VERSION': meson.project_version()}, - install_dir: qemu_docdir) - manuals = [ 'devel', 'interop', 'tools', 'specs', 'system', 'user' ] man_pages = { - 'interop' : { 'qemu-ga.8': (have_tools ? 'man8' : ''), 'qemu-ga-ref.7': 'man7', 'qemu-qmp-ref.7': 'man7', 'qemu-storage-daemon-qmp-ref.7': (have_tools ? 'man7' : ''), - }, - 'tools': { 'qemu-img.1': (have_tools ? 'man1' : ''), 'qemu-nbd.8': (have_tools ? 'man8' : ''), 'qemu-pr-helper.8': (have_tools ? 'man8' : ''), @@ -XXX,XX +XXX,XX @@ if build_docs 'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''), 'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''), 'virtiofsd.1': (have_virtiofsd ? 'man1' : ''), - }, - 'system': { 'qemu.1': 'man1', 'qemu-block-drivers.7': 'man7', 'qemu-cpu-models.7': 'man7' - }, } sphinxdocs = [] sphinxmans = [] - foreach manual : manuals - private_dir = meson.current_build_dir() / (manual + '.p') - output_dir = meson.current_build_dir() / manual - input_dir = meson.current_source_dir() / manual - this_manual = custom_target(manual + ' manual', + private_dir = meson.current_build_dir() / 'manual.p' + output_dir = meson.current_build_dir() / 'manual' + input_dir = meson.current_source_dir() + + this_manual = custom_target('QEMU manual', build_by_default: build_docs, - output: [manual + '.stamp'], - input: [files('conf.py'), files(manual / 'conf.py')], - depfile: manual + '.d', + output: 'docs.stamp', + input: files('conf.py'), + depfile: 'docs.d', depend_files: sphinx_extn_depends, command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@', '-Ddepfile_stamp=@OUTPUT0@', '-b', 'html', '-d', private_dir, input_dir, output_dir]) - sphinxdocs += this_manual - if build_docs and manual != 'devel' - install_subdir(output_dir, install_dir: qemu_docdir) - endif + sphinxdocs += this_manual + install_subdir(output_dir, install_dir: qemu_docdir, strip_directory: true) - these_man_pages = [] - install_dirs = [] - foreach page, section : man_pages.get(manual, {}) - these_man_pages += page - install_dirs += section == '' ? false : get_option('mandir') / section - endforeach - if these_man_pages.length() > 0 - sphinxmans += custom_target(manual + ' man pages', - build_by_default: build_docs, - output: these_man_pages, - input: this_manual, - install: build_docs, - install_dir: install_dirs, - command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir, - input_dir, meson.current_build_dir()]) - endif + these_man_pages = [] + install_dirs = [] + foreach page, section : man_pages + these_man_pages += page + install_dirs += section == '' ? false : get_option('mandir') / section endforeach + + sphinxmans += custom_target('QEMU man pages', + build_by_default: build_docs, + output: these_man_pages, + input: this_manual, + install: build_docs, + install_dir: install_dirs, + command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir, + input_dir, meson.current_build_dir()]) + alias_target('sphinxdocs', sphinxdocs) alias_target('html', sphinxdocs) alias_target('man', sphinxmans) diff --git a/docs/specs/conf.py b/docs/specs/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/specs/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'specs' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = \ - u'System Emulation Guest Hardware Specifications' diff --git a/docs/system/conf.py b/docs/system/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/system/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'system' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = u'System Emulation User''s Guide' - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('qemu-manpage', 'qemu', u'QEMU User Documentation', - ['Fabrice Bellard'], 1), - ('qemu-block-drivers', 'qemu-block-drivers', - u'QEMU block drivers reference', - ['Fabrice Bellard and the QEMU Project developers'], 7), - ('qemu-cpu-models', 'qemu-cpu-models', - u'QEMU CPU Models', - ['The QEMU Project developers'], 7) -] diff --git a/docs/tools/conf.py b/docs/tools/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/tools/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'tools' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = \ - u'Tools Guide' - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('qemu-img', 'qemu-img', u'QEMU disk image utility', - ['Fabrice Bellard'], 1), - ('qemu-storage-daemon', 'qemu-storage-daemon', u'QEMU storage daemon', - [], 1), - ('qemu-nbd', 'qemu-nbd', u'QEMU Disk Network Block Device Server', - ['Anthony Liguori <anthony@codemonkey.ws>'], 8), - ('qemu-pr-helper', 'qemu-pr-helper', 'QEMU persistent reservation helper', - [], 8), - ('qemu-trace-stap', 'qemu-trace-stap', u'QEMU SystemTap trace tool', - [], 1), - ('virtfs-proxy-helper', 'virtfs-proxy-helper', - u'QEMU 9p virtfs proxy filesystem helper', - ['M. Mohan Kumar'], 1), - ('virtiofsd', 'virtiofsd', u'QEMU virtio-fs shared file system daemon', - ['Stefan Hajnoczi <stefanha@redhat.com>', - 'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1), -] diff --git a/docs/user/conf.py b/docs/user/conf.py deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/user/conf.py +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# -*- coding: utf-8 -*- -# -# QEMU documentation build configuration file for the 'user' manual. -# -# This includes the top level conf file and then makes any necessary tweaks. -import sys -import os - -qemu_docdir = os.path.abspath("..") -parent_config = os.path.join(qemu_docdir, "conf.py") -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) - -# This slightly misuses the 'description', but is the best way to get -# the manual title to appear in the sidebar. -html_theme_options['description'] = u'User Mode Emulation User''s Guide' -- 2.20.1 In commit cd8be50e58f63413c0 we converted the A32 coprocessor insns to decodetree. This accidentally broke XScale/iWMMXt insns, because it moved the handling of "cp insns which are handled by looking up the cp register in the hashtable" from after the call to the legacy disas_xscale_insn() decode to before it, with the result that all XScale/iWMMXt insns now UNDEF. Update valid_cp() so that it knows that on XScale cp 0 and 1 are not standard coprocessor instructions; this will cause the decodetree trans_ functions to ignore them, so that execution will correctly get through to the legacy decode again. Cc: qemu-stable@nongnu.org Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20210108195157.32067-1-peter.maydell@linaro.org --- target/arm/translate.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool valid_cp(DisasContext *s, int cp) * only cp14 and cp15 are valid, and other values aren't considered * to be in the coprocessor-instruction space at all. v8M still * permits coprocessors 0..7. + * For XScale, we must not decode the XScale cp0, cp1 space as + * a standard coprocessor insn, because we want to fall through to + * the legacy disas_xscale_insn() decoder after decodetree is done. */ + if (arm_dc_feature(s, ARM_FEATURE_XSCALE) && (cp == 0 || cp == 1)) { + return false; + } + if (arm_dc_feature(s, ARM_FEATURE_V8) && !arm_dc_feature(s, ARM_FEATURE_M)) { return cp >= 14; -- 2.20.1 A copy-and-paste error meant that the return value for register offset 0x44 (the RX Status FIFO PEEK register) returned a byte from a bogus offset in the rx status FIFO. Fix the typo. Cc: qemu-stable@nongnu.org Fixes: https://bugs.launchpad.net/qemu/+bug/1904954 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210108180401.2263-2-peter.maydell@linaro.org --- hw/net/lan9118.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset, case 0x40: return rx_status_fifo_pop(s); case 0x44: - return s->rx_status_fifo[s->tx_status_fifo_head]; + return s->rx_status_fifo[s->rx_status_fifo_head]; case 0x48: return tx_status_fifo_pop(s); case 0x4c: -- 2.20.1 The lan9118 code mostly uses symbolic constants for register offsets; the exceptions are those which the datasheet doesn't give an official symbolic name to. Add some names for the registers which don't already have them, based on the longer names they are given in the memory map. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210108180401.2263-3-peter.maydell@linaro.org --- hw/net/lan9118.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ do { hw_error("lan9118: error: " fmt , ## __VA_ARGS__);} while (0) do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0) #endif +/* The tx and rx fifo ports are a range of aliased 32-bit registers */ +#define RX_DATA_FIFO_PORT_FIRST 0x00 +#define RX_DATA_FIFO_PORT_LAST 0x1f +#define TX_DATA_FIFO_PORT_FIRST 0x20 +#define TX_DATA_FIFO_PORT_LAST 0x3f + +#define RX_STATUS_FIFO_PORT 0x40 +#define RX_STATUS_FIFO_PEEK 0x44 +#define TX_STATUS_FIFO_PORT 0x48 +#define TX_STATUS_FIFO_PEEK 0x4c + #define CSR_ID_REV 0x50 #define CSR_IRQ_CFG 0x54 #define CSR_INT_STS 0x58 @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, offset &= 0xff; //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val); - if (offset >= 0x20 && offset < 0x40) { + if (offset >= TX_DATA_FIFO_PORT_FIRST && + offset <= TX_DATA_FIFO_PORT_LAST) { /* TX FIFO */ tx_fifo_push(s, val); return; @@ -XXX,XX +XXX,XX @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset, lan9118_state *s = (lan9118_state *)opaque; //DPRINTF("Read reg 0x%02x\n", (int)offset); - if (offset < 0x20) { + if (offset <= RX_DATA_FIFO_PORT_LAST) { /* RX FIFO */ return rx_fifo_pop(s); } switch (offset) { - case 0x40: + case RX_STATUS_FIFO_PORT: return rx_status_fifo_pop(s); - case 0x44: + case RX_STATUS_FIFO_PEEK: return s->rx_status_fifo[s->rx_status_fifo_head]; - case 0x48: + case TX_STATUS_FIFO_PORT: return tx_status_fifo_pop(s); - case 0x4c: + case TX_STATUS_FIFO_PEEK: return s->tx_status_fifo[s->tx_status_fifo_head]; case CSR_ID_REV: return 0x01180001; -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> This patch allows NPCM7XX CLK module to compute clocks that are used by other NPCM7XX modules. Add a new struct NPCM7xxClockConverterState which represents a single converter. Each clock converter in CLK module represents one converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter takes one or more input clocks and converts them into one output clock. They form a clock hierarchy in the CLK module and are responsible for outputing clocks for various other modules in an NPCM7XX SoC. Each converter has a function pointer called "convert" which represents the unique logic for that converter. The clock contains two initialization information: ConverterInitInfo and ConverterConnectionInfo. They represent the vertices and edges in the clock diagram respectively. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210108190945.949196-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm7xx_clk.h | 140 +++++- hw/misc/npcm7xx_clk.c | 805 +++++++++++++++++++++++++++++++++- 2 files changed, 932 insertions(+), 13 deletions(-) diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_CLK_H #include "exec/memory.h" +#include "hw/clock.h" #include "hw/sysbus.h" /* @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in" -typedef struct NPCM7xxCLKState { +/* Maximum amount of clock inputs in a SEL module. */ +#define NPCM7XX_CLK_SEL_MAX_INPUT 5 + +/* PLLs in CLK module. */ +typedef enum NPCM7xxClockPLL { + NPCM7XX_CLOCK_PLL0, + NPCM7XX_CLOCK_PLL1, + NPCM7XX_CLOCK_PLL2, + NPCM7XX_CLOCK_PLLG, + NPCM7XX_CLOCK_NR_PLLS, +} NPCM7xxClockPLL; + +/* SEL/MUX in CLK module. */ +typedef enum NPCM7xxClockSEL { + NPCM7XX_CLOCK_PIXCKSEL, + NPCM7XX_CLOCK_MCCKSEL, + NPCM7XX_CLOCK_CPUCKSEL, + NPCM7XX_CLOCK_CLKOUTSEL, + NPCM7XX_CLOCK_UARTCKSEL, + NPCM7XX_CLOCK_TIMCKSEL, + NPCM7XX_CLOCK_SDCKSEL, + NPCM7XX_CLOCK_GFXMSEL, + NPCM7XX_CLOCK_SUCKSEL, + NPCM7XX_CLOCK_NR_SELS, +} NPCM7xxClockSEL; + +/* Dividers in CLK module. */ +typedef enum NPCM7xxClockDivider { + NPCM7XX_CLOCK_PLL1D2, /* PLL1/2 */ + NPCM7XX_CLOCK_PLL2D2, /* PLL2/2 */ + NPCM7XX_CLOCK_MC_DIVIDER, + NPCM7XX_CLOCK_AXI_DIVIDER, + NPCM7XX_CLOCK_AHB_DIVIDER, + NPCM7XX_CLOCK_AHB3_DIVIDER, + NPCM7XX_CLOCK_SPI0_DIVIDER, + NPCM7XX_CLOCK_SPIX_DIVIDER, + NPCM7XX_CLOCK_APB1_DIVIDER, + NPCM7XX_CLOCK_APB2_DIVIDER, + NPCM7XX_CLOCK_APB3_DIVIDER, + NPCM7XX_CLOCK_APB4_DIVIDER, + NPCM7XX_CLOCK_APB5_DIVIDER, + NPCM7XX_CLOCK_CLKOUT_DIVIDER, + NPCM7XX_CLOCK_UART_DIVIDER, + NPCM7XX_CLOCK_TIMER_DIVIDER, + NPCM7XX_CLOCK_ADC_DIVIDER, + NPCM7XX_CLOCK_MMC_DIVIDER, + NPCM7XX_CLOCK_SDHC_DIVIDER, + NPCM7XX_CLOCK_GFXM_DIVIDER, /* divide by 3 */ + NPCM7XX_CLOCK_UTMI_DIVIDER, + NPCM7XX_CLOCK_NR_DIVIDERS, +} NPCM7xxClockConverter; + +typedef struct NPCM7xxCLKState NPCM7xxCLKState; + +/** + * struct NPCM7xxClockPLLState - A PLL module in CLK module. + * @name: The name of the module. + * @clk: The CLK module that owns this module. + * @clock_in: The input clock of this module. + * @clock_out: The output clock of this module. + * @reg: The control registers for this PLL module. + */ +typedef struct NPCM7xxClockPLLState { + DeviceState parent; + + const char *name; + NPCM7xxCLKState *clk; + Clock *clock_in; + Clock *clock_out; + + int reg; +} NPCM7xxClockPLLState; + +/** + * struct NPCM7xxClockSELState - A SEL module in CLK module. + * @name: The name of the module. + * @clk: The CLK module that owns this module. + * @input_size: The size of inputs of this module. + * @clock_in: The input clocks of this module. + * @clock_out: The output clocks of this module. + * @offset: The offset of this module in the control register. + * @len: The length of this module in the control register. + */ +typedef struct NPCM7xxClockSELState { + DeviceState parent; + + const char *name; + NPCM7xxCLKState *clk; + uint8_t input_size; + Clock *clock_in[NPCM7XX_CLK_SEL_MAX_INPUT]; + Clock *clock_out; + + int offset; + int len; +} NPCM7xxClockSELState; + +/** + * struct NPCM7xxClockDividerState - A Divider module in CLK module. + * @name: The name of the module. + * @clk: The CLK module that owns this module. + * @clock_in: The input clock of this module. + * @clock_out: The output clock of this module. + * @divide: The function the divider uses to divide the input. + * @reg: The index of the control register that contains the divisor. + * @offset: The offset of the divisor in the control register. + * @len: The length of the divisor in the control register. + * @divisor: The divisor for a constant divisor + */ +typedef struct NPCM7xxClockDividerState { + DeviceState parent; + + const char *name; + NPCM7xxCLKState *clk; + Clock *clock_in; + Clock *clock_out; + + uint32_t (*divide)(struct NPCM7xxClockDividerState *s); + union { + struct { + int reg; + int offset; + int len; + }; + int divisor; + }; +} NPCM7xxClockDividerState; + +struct NPCM7xxCLKState { SysBusDevice parent; MemoryRegion iomem; + /* Clock converters */ + NPCM7xxClockPLLState plls[NPCM7XX_CLOCK_NR_PLLS]; + NPCM7xxClockSELState sels[NPCM7XX_CLOCK_NR_SELS]; + NPCM7xxClockDividerState dividers[NPCM7XX_CLOCK_NR_DIVIDERS]; + uint32_t regs[NPCM7XX_CLK_NR_REGS]; /* Time reference for SECCNT and CNTR25M, initialized by power on reset */ int64_t ref_ns; -} NPCM7xxCLKState; + + /* The incoming reference clock. */ + Clock *clkref; +}; #define TYPE_NPCM7XX_CLK "npcm7xx-clk" #define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK) diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/npcm7xx_clk.h" #include "hw/timer/npcm7xx_timer.h" +#include "hw/qdev-clock.h" #include "migration/vmstate.h" #include "qemu/error-report.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ #include "trace.h" #include "sysemu/watchdog.h" +/* + * The reference clock hz, and the SECCNT and CNTR25M registers in this module, + * is always 25 MHz. + */ +#define NPCM7XX_CLOCK_REF_HZ (25000000) + +/* Register Field Definitions */ +#define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex A9 Cores */ + #define PLLCON_LOKI BIT(31) #define PLLCON_LOKS BIT(30) #define PLLCON_PWDEN BIT(12) +#define PLLCON_FBDV(con) extract32((con), 16, 12) +#define PLLCON_OTDV2(con) extract32((con), 13, 3) +#define PLLCON_OTDV1(con) extract32((con), 8, 3) +#define PLLCON_INDV(con) extract32((con), 0, 6) enum NPCM7xxCLKRegisters { NPCM7XX_CLK_CLKEN1, @@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = { [NPCM7XX_CLK_AHBCKFI] = 0x000000c8, }; -/* Register Field Definitions */ -#define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex A9 Cores */ - /* The number of watchdogs that can trigger a reset. */ #define NPCM7XX_NR_WATCHDOGS (3) +/* Clock converter functions */ + +#define TYPE_NPCM7XX_CLOCK_PLL "npcm7xx-clock-pll" +#define NPCM7XX_CLOCK_PLL(obj) OBJECT_CHECK(NPCM7xxClockPLLState, \ + (obj), TYPE_NPCM7XX_CLOCK_PLL) +#define TYPE_NPCM7XX_CLOCK_SEL "npcm7xx-clock-sel" +#define NPCM7XX_CLOCK_SEL(obj) OBJECT_CHECK(NPCM7xxClockSELState, \ + (obj), TYPE_NPCM7XX_CLOCK_SEL) +#define TYPE_NPCM7XX_CLOCK_DIVIDER "npcm7xx-clock-divider" +#define NPCM7XX_CLOCK_DIVIDER(obj) OBJECT_CHECK(NPCM7xxClockDividerState, \ + (obj), TYPE_NPCM7XX_CLOCK_DIVIDER) + +static void npcm7xx_clk_update_pll(void *opaque) +{ + NPCM7xxClockPLLState *s = opaque; + uint32_t con = s->clk->regs[s->reg]; + uint64_t freq; + + /* The PLL is grounded if it is not locked yet. */ + if (con & PLLCON_LOKI) { + freq = clock_get_hz(s->clock_in); + freq *= PLLCON_FBDV(con); + freq /= PLLCON_INDV(con) * PLLCON_OTDV1(con) * PLLCON_OTDV2(con); + } else { + freq = 0; + } + + clock_update_hz(s->clock_out, freq); +} + +static void npcm7xx_clk_update_sel(void *opaque) +{ + NPCM7xxClockSELState *s = opaque; + uint32_t index = extract32(s->clk->regs[NPCM7XX_CLK_CLKSEL], s->offset, + s->len); + + if (index >= s->input_size) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: SEL index: %u out of range\n", + __func__, index); + index = 0; + } + clock_update_hz(s->clock_out, clock_get_hz(s->clock_in[index])); +} + +static void npcm7xx_clk_update_divider(void *opaque) +{ + NPCM7xxClockDividerState *s = opaque; + uint32_t freq; + + freq = s->divide(s); + clock_update_hz(s->clock_out, freq); +} + +static uint32_t divide_by_constant(NPCM7xxClockDividerState *s) +{ + return clock_get_hz(s->clock_in) / s->divisor; +} + +static uint32_t divide_by_reg_divisor(NPCM7xxClockDividerState *s) +{ + return clock_get_hz(s->clock_in) / + (extract32(s->clk->regs[s->reg], s->offset, s->len) + 1); +} + +static uint32_t divide_by_reg_divisor_times_2(NPCM7xxClockDividerState *s) +{ + return divide_by_reg_divisor(s) / 2; +} + +static uint32_t shift_by_reg_divisor(NPCM7xxClockDividerState *s) +{ + return clock_get_hz(s->clock_in) >> + extract32(s->clk->regs[s->reg], s->offset, s->len); +} + +static NPCM7xxClockPLL find_pll_by_reg(enum NPCM7xxCLKRegisters reg) +{ + switch (reg) { + case NPCM7XX_CLK_PLLCON0: + return NPCM7XX_CLOCK_PLL0; + case NPCM7XX_CLK_PLLCON1: + return NPCM7XX_CLOCK_PLL1; + case NPCM7XX_CLK_PLLCON2: + return NPCM7XX_CLOCK_PLL2; + case NPCM7XX_CLK_PLLCONG: + return NPCM7XX_CLOCK_PLLG; + default: + g_assert_not_reached(); + } +} + +static void npcm7xx_clk_update_all_plls(NPCM7xxCLKState *clk) +{ + int i; + + for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) { + npcm7xx_clk_update_pll(&clk->plls[i]); + } +} + +static void npcm7xx_clk_update_all_sels(NPCM7xxCLKState *clk) +{ + int i; + + for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) { + npcm7xx_clk_update_sel(&clk->sels[i]); + } +} + +static void npcm7xx_clk_update_all_dividers(NPCM7xxCLKState *clk) +{ + int i; + + for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) { + npcm7xx_clk_update_divider(&clk->dividers[i]); + } +} + +static void npcm7xx_clk_update_all_clocks(NPCM7xxCLKState *clk) +{ + clock_update_hz(clk->clkref, NPCM7XX_CLOCK_REF_HZ); + npcm7xx_clk_update_all_plls(clk); + npcm7xx_clk_update_all_sels(clk); + npcm7xx_clk_update_all_dividers(clk); +} + +/* Types of clock sources. */ +typedef enum ClockSrcType { + CLKSRC_REF, + CLKSRC_PLL, + CLKSRC_SEL, + CLKSRC_DIV, +} ClockSrcType; + +typedef struct PLLInitInfo { + const char *name; + ClockSrcType src_type; + int src_index; + int reg; + const char *public_name; +} PLLInitInfo; + +typedef struct SELInitInfo { + const char *name; + uint8_t input_size; + ClockSrcType src_type[NPCM7XX_CLK_SEL_MAX_INPUT]; + int src_index[NPCM7XX_CLK_SEL_MAX_INPUT]; + int offset; + int len; + const char *public_name; +} SELInitInfo; + +typedef struct DividerInitInfo { + const char *name; + ClockSrcType src_type; + int src_index; + uint32_t (*divide)(NPCM7xxClockDividerState *s); + int reg; /* not used when type == CONSTANT */ + int offset; /* not used when type == CONSTANT */ + int len; /* not used when type == CONSTANT */ + int divisor; /* used only when type == CONSTANT */ + const char *public_name; +} DividerInitInfo; + +static const PLLInitInfo pll_init_info_list[] = { + [NPCM7XX_CLOCK_PLL0] = { + .name = "pll0", + .src_type = CLKSRC_REF, + .reg = NPCM7XX_CLK_PLLCON0, + }, + [NPCM7XX_CLOCK_PLL1] = { + .name = "pll1", + .src_type = CLKSRC_REF, + .reg = NPCM7XX_CLK_PLLCON1, + }, + [NPCM7XX_CLOCK_PLL2] = { + .name = "pll2", + .src_type = CLKSRC_REF, + .reg = NPCM7XX_CLK_PLLCON2, + }, + [NPCM7XX_CLOCK_PLLG] = { + .name = "pllg", + .src_type = CLKSRC_REF, + .reg = NPCM7XX_CLK_PLLCONG, + }, +}; + +static const SELInitInfo sel_init_info_list[] = { + [NPCM7XX_CLOCK_PIXCKSEL] = { + .name = "pixcksel", + .input_size = 2, + .src_type = {CLKSRC_PLL, CLKSRC_REF}, + .src_index = {NPCM7XX_CLOCK_PLLG, 0}, + .offset = 5, + .len = 1, + .public_name = "pixel-clock", + }, + [NPCM7XX_CLOCK_MCCKSEL] = { + .name = "mccksel", + .input_size = 4, + .src_type = {CLKSRC_DIV, CLKSRC_REF, CLKSRC_REF, + /*MCBPCK, shouldn't be used in normal operation*/ + CLKSRC_REF}, + .src_index = {NPCM7XX_CLOCK_PLL1D2, 0, 0, 0}, + .offset = 12, + .len = 2, + .public_name = "mc-phy-clock", + }, + [NPCM7XX_CLOCK_CPUCKSEL] = { + .name = "cpucksel", + .input_size = 4, + .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, + /*SYSBPCK, shouldn't be used in normal operation*/ + CLKSRC_REF}, + .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, 0}, + .offset = 0, + .len = 2, + .public_name = "system-clock", + }, + [NPCM7XX_CLOCK_CLKOUTSEL] = { + .name = "clkoutsel", + .input_size = 5, + .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, + CLKSRC_PLL, CLKSRC_DIV}, + .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, + NPCM7XX_CLOCK_PLLG, NPCM7XX_CLOCK_PLL2D2}, + .offset = 18, + .len = 3, + .public_name = "tock", + }, + [NPCM7XX_CLOCK_UARTCKSEL] = { + .name = "uartcksel", + .input_size = 4, + .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV}, + .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, + NPCM7XX_CLOCK_PLL2D2}, + .offset = 8, + .len = 2, + }, + [NPCM7XX_CLOCK_TIMCKSEL] = { + .name = "timcksel", + .input_size = 4, + .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV}, + .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, + NPCM7XX_CLOCK_PLL2D2}, + .offset = 14, + .len = 2, + }, + [NPCM7XX_CLOCK_SDCKSEL] = { + .name = "sdcksel", + .input_size = 4, + .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV}, + .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, + NPCM7XX_CLOCK_PLL2D2}, + .offset = 6, + .len = 2, + }, + [NPCM7XX_CLOCK_GFXMSEL] = { + .name = "gfxmksel", + .input_size = 2, + .src_type = {CLKSRC_REF, CLKSRC_PLL}, + .src_index = {0, NPCM7XX_CLOCK_PLL2}, + .offset = 21, + .len = 1, + }, + [NPCM7XX_CLOCK_SUCKSEL] = { + .name = "sucksel", + .input_size = 4, + .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV}, + .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, + NPCM7XX_CLOCK_PLL2D2}, + .offset = 10, + .len = 2, + }, +}; + +static const DividerInitInfo divider_init_info_list[] = { + [NPCM7XX_CLOCK_PLL1D2] = { + .name = "pll1d2", + .src_type = CLKSRC_PLL, + .src_index = NPCM7XX_CLOCK_PLL1, + .divide = divide_by_constant, + .divisor = 2, + }, + [NPCM7XX_CLOCK_PLL2D2] = { + .name = "pll2d2", + .src_type = CLKSRC_PLL, + .src_index = NPCM7XX_CLOCK_PLL2, + .divide = divide_by_constant, + .divisor = 2, + }, + [NPCM7XX_CLOCK_MC_DIVIDER] = { + .name = "mc-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_MCCKSEL, + .divide = divide_by_constant, + .divisor = 2, + .public_name = "mc-clock" + }, + [NPCM7XX_CLOCK_AXI_DIVIDER] = { + .name = "axi-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_CPUCKSEL, + .divide = shift_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV1, + .offset = 0, + .len = 1, + .public_name = "clk2" + }, + [NPCM7XX_CLOCK_AHB_DIVIDER] = { + .name = "ahb-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AXI_DIVIDER, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV1, + .offset = 26, + .len = 2, + .public_name = "clk4" + }, + [NPCM7XX_CLOCK_AHB3_DIVIDER] = { + .name = "ahb3-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV1, + .offset = 6, + .len = 5, + .public_name = "ahb3-spi3-clock" + }, + [NPCM7XX_CLOCK_SPI0_DIVIDER] = { + .name = "spi0-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV3, + .offset = 6, + .len = 5, + .public_name = "spi0-clock", + }, + [NPCM7XX_CLOCK_SPIX_DIVIDER] = { + .name = "spix-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV3, + .offset = 1, + .len = 5, + .public_name = "spix-clock", + }, + [NPCM7XX_CLOCK_APB1_DIVIDER] = { + .name = "apb1-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, + .divide = shift_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV2, + .offset = 24, + .len = 2, + .public_name = "apb1-clock", + }, + [NPCM7XX_CLOCK_APB2_DIVIDER] = { + .name = "apb2-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, + .divide = shift_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV2, + .offset = 26, + .len = 2, + .public_name = "apb2-clock", + }, + [NPCM7XX_CLOCK_APB3_DIVIDER] = { + .name = "apb3-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, + .divide = shift_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV2, + .offset = 28, + .len = 2, + .public_name = "apb3-clock", + }, + [NPCM7XX_CLOCK_APB4_DIVIDER] = { + .name = "apb4-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, + .divide = shift_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV2, + .offset = 30, + .len = 2, + .public_name = "apb4-clock", + }, + [NPCM7XX_CLOCK_APB5_DIVIDER] = { + .name = "apb5-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, + .divide = shift_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV2, + .offset = 22, + .len = 2, + .public_name = "apb5-clock", + }, + [NPCM7XX_CLOCK_CLKOUT_DIVIDER] = { + .name = "clkout-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_CLKOUTSEL, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV2, + .offset = 16, + .len = 5, + .public_name = "clkout", + }, + [NPCM7XX_CLOCK_UART_DIVIDER] = { + .name = "uart-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_UARTCKSEL, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV1, + .offset = 16, + .len = 5, + .public_name = "uart-clock", + }, + [NPCM7XX_CLOCK_TIMER_DIVIDER] = { + .name = "timer-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_TIMCKSEL, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV1, + .offset = 21, + .len = 5, + .public_name = "timer-clock", + }, + [NPCM7XX_CLOCK_ADC_DIVIDER] = { + .name = "adc-divider", + .src_type = CLKSRC_DIV, + .src_index = NPCM7XX_CLOCK_TIMER_DIVIDER, + .divide = shift_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV1, + .offset = 28, + .len = 3, + .public_name = "adc-clock", + }, + [NPCM7XX_CLOCK_MMC_DIVIDER] = { + .name = "mmc-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_SDCKSEL, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV1, + .offset = 11, + .len = 5, + .public_name = "mmc-clock", + }, + [NPCM7XX_CLOCK_SDHC_DIVIDER] = { + .name = "sdhc-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_SDCKSEL, + .divide = divide_by_reg_divisor_times_2, + .reg = NPCM7XX_CLK_CLKDIV2, + .offset = 0, + .len = 4, + .public_name = "sdhc-clock", + }, + [NPCM7XX_CLOCK_GFXM_DIVIDER] = { + .name = "gfxm-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_GFXMSEL, + .divide = divide_by_constant, + .divisor = 3, + .public_name = "gfxm-clock", + }, + [NPCM7XX_CLOCK_UTMI_DIVIDER] = { + .name = "utmi-divider", + .src_type = CLKSRC_SEL, + .src_index = NPCM7XX_CLOCK_SUCKSEL, + .divide = divide_by_reg_divisor, + .reg = NPCM7XX_CLK_CLKDIV2, + .offset = 8, + .len = 5, + .public_name = "utmi-clock", + }, +}; + +static void npcm7xx_clk_pll_init(Object *obj) +{ + NPCM7xxClockPLLState *pll = NPCM7XX_CLOCK_PLL(obj); + + pll->clock_in = qdev_init_clock_in(DEVICE(pll), "clock-in", + npcm7xx_clk_update_pll, pll); + pll->clock_out = qdev_init_clock_out(DEVICE(pll), "clock-out"); +} + +static void npcm7xx_clk_sel_init(Object *obj) +{ + int i; + NPCM7xxClockSELState *sel = NPCM7XX_CLOCK_SEL(obj); + + for (i = 0; i < NPCM7XX_CLK_SEL_MAX_INPUT; ++i) { + sel->clock_in[i] = qdev_init_clock_in(DEVICE(sel), + g_strdup_printf("clock-in[%d]", i), + npcm7xx_clk_update_sel, sel); + } + sel->clock_out = qdev_init_clock_out(DEVICE(sel), "clock-out"); +} +static void npcm7xx_clk_divider_init(Object *obj) +{ + NPCM7xxClockDividerState *div = NPCM7XX_CLOCK_DIVIDER(obj); + + div->clock_in = qdev_init_clock_in(DEVICE(div), "clock-in", + npcm7xx_clk_update_divider, div); + div->clock_out = qdev_init_clock_out(DEVICE(div), "clock-out"); +} + +static void npcm7xx_init_clock_pll(NPCM7xxClockPLLState *pll, + NPCM7xxCLKState *clk, const PLLInitInfo *init_info) +{ + pll->name = init_info->name; + pll->clk = clk; + pll->reg = init_info->reg; + if (init_info->public_name != NULL) { + qdev_alias_clock(DEVICE(pll), "clock-out", DEVICE(clk), + init_info->public_name); + } +} + +static void npcm7xx_init_clock_sel(NPCM7xxClockSELState *sel, + NPCM7xxCLKState *clk, const SELInitInfo *init_info) +{ + int input_size = init_info->input_size; + + sel->name = init_info->name; + sel->clk = clk; + sel->input_size = init_info->input_size; + g_assert(input_size <= NPCM7XX_CLK_SEL_MAX_INPUT); + sel->offset = init_info->offset; + sel->len = init_info->len; + if (init_info->public_name != NULL) { + qdev_alias_clock(DEVICE(sel), "clock-out", DEVICE(clk), + init_info->public_name); + } +} + +static void npcm7xx_init_clock_divider(NPCM7xxClockDividerState *div, + NPCM7xxCLKState *clk, const DividerInitInfo *init_info) +{ + div->name = init_info->name; + div->clk = clk; + + div->divide = init_info->divide; + if (div->divide == divide_by_constant) { + div->divisor = init_info->divisor; + } else { + div->reg = init_info->reg; + div->offset = init_info->offset; + div->len = init_info->len; + } + if (init_info->public_name != NULL) { + qdev_alias_clock(DEVICE(div), "clock-out", DEVICE(clk), + init_info->public_name); + } +} + +static Clock *npcm7xx_get_clock(NPCM7xxCLKState *clk, ClockSrcType type, + int index) +{ + switch (type) { + case CLKSRC_REF: + return clk->clkref; + case CLKSRC_PLL: + return clk->plls[index].clock_out; + case CLKSRC_SEL: + return clk->sels[index].clock_out; + case CLKSRC_DIV: + return clk->dividers[index].clock_out; + default: + g_assert_not_reached(); + } +} + +static void npcm7xx_connect_clocks(NPCM7xxCLKState *clk) +{ + int i, j; + Clock *src; + + for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) { + src = npcm7xx_get_clock(clk, pll_init_info_list[i].src_type, + pll_init_info_list[i].src_index); + clock_set_source(clk->plls[i].clock_in, src); + } + for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) { + for (j = 0; j < sel_init_info_list[i].input_size; ++j) { + src = npcm7xx_get_clock(clk, sel_init_info_list[i].src_type[j], + sel_init_info_list[i].src_index[j]); + clock_set_source(clk->sels[i].clock_in[j], src); + } + } + for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) { + src = npcm7xx_get_clock(clk, divider_init_info_list[i].src_type, + divider_init_info_list[i].src_index); + clock_set_source(clk->dividers[i].clock_in, src); + } +} + static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size) * * The 4 LSBs are always zero: (1e9 / 640) << 4 = 25000000. */ - value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_TIMER_REF_HZ; + value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_CLOCK_REF_HZ; break; default: @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset, value |= (value & PLLCON_LOKS); } } + /* Only update PLL when it is locked. */ + if (value & PLLCON_LOKI) { + npcm7xx_clk_update_pll(&s->plls[find_pll_by_reg(reg)]); + } + break; + + case NPCM7XX_CLK_CLKSEL: + npcm7xx_clk_update_all_sels(s); + break; + + case NPCM7XX_CLK_CLKDIV1: + case NPCM7XX_CLK_CLKDIV2: + case NPCM7XX_CLK_CLKDIV3: + npcm7xx_clk_update_all_dividers(s); break; case NPCM7XX_CLK_CNTR25M: @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type) case RESET_TYPE_COLD: memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + npcm7xx_clk_update_all_clocks(s); return; } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type) __func__, type); } +static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s) +{ + int i; + + s->clkref = qdev_init_clock_in(DEVICE(s), "clkref", NULL, NULL); + + /* First pass: init all converter modules */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(pll_init_info_list) != NPCM7XX_CLOCK_NR_PLLS); + QEMU_BUILD_BUG_ON(ARRAY_SIZE(sel_init_info_list) != NPCM7XX_CLOCK_NR_SELS); + QEMU_BUILD_BUG_ON(ARRAY_SIZE(divider_init_info_list) + != NPCM7XX_CLOCK_NR_DIVIDERS); + for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) { + object_initialize_child(OBJECT(s), pll_init_info_list[i].name, + &s->plls[i], TYPE_NPCM7XX_CLOCK_PLL); + npcm7xx_init_clock_pll(&s->plls[i], s, + &pll_init_info_list[i]); + } + for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) { + object_initialize_child(OBJECT(s), sel_init_info_list[i].name, + &s->sels[i], TYPE_NPCM7XX_CLOCK_SEL); + npcm7xx_init_clock_sel(&s->sels[i], s, + &sel_init_info_list[i]); + } + for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) { + object_initialize_child(OBJECT(s), divider_init_info_list[i].name, + &s->dividers[i], TYPE_NPCM7XX_CLOCK_DIVIDER); + npcm7xx_init_clock_divider(&s->dividers[i], s, + &divider_init_info_list[i]); + } + + /* Second pass: connect converter modules */ + npcm7xx_connect_clocks(s); + + clock_update_hz(s->clkref, NPCM7XX_CLOCK_REF_HZ); +} + static void npcm7xx_clk_init(Object *obj) { NPCM7xxCLKState *s = NPCM7XX_CLK(obj); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj) memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s, TYPE_NPCM7XX_CLK, 4 * KiB); sysbus_init_mmio(&s->parent, &s->iomem); - qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset, - NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS); } -static const VMStateDescription vmstate_npcm7xx_clk = { - .name = "npcm7xx-clk", +static int npcm7xx_clk_post_load(void *opaque, int version_id) +{ + if (version_id >= 1) { + NPCM7xxCLKState *clk = opaque; + + npcm7xx_clk_update_all_clocks(clk); + } + + return 0; +} + +static void npcm7xx_clk_realize(DeviceState *dev, Error **errp) +{ + int i; + NPCM7xxCLKState *s = NPCM7XX_CLK(dev); + + qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset, + NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS); + npcm7xx_clk_init_clock_hierarchy(s); + + /* Realize child devices */ + for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) { + if (!qdev_realize(DEVICE(&s->plls[i]), NULL, errp)) { + return; + } + } + for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) { + if (!qdev_realize(DEVICE(&s->sels[i]), NULL, errp)) { + return; + } + } + for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) { + if (!qdev_realize(DEVICE(&s->dividers[i]), NULL, errp)) { + return; + } + } +} + +static const VMStateDescription vmstate_npcm7xx_clk_pll = { + .name = "npcm7xx-clock-pll", .version_id = 0, .minimum_version_id = 0, - .fields = (VMStateField[]) { - VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS), - VMSTATE_INT64(ref_ns, NPCM7xxCLKState), + .fields = (VMStateField[]) { + VMSTATE_CLOCK(clock_in, NPCM7xxClockPLLState), VMSTATE_END_OF_LIST(), }, }; +static const VMStateDescription vmstate_npcm7xx_clk_sel = { + .name = "npcm7xx-clock-sel", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(clock_in, NPCM7xxClockSELState, + NPCM7XX_CLK_SEL_MAX_INPUT, 0, vmstate_clock, Clock), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_clk_divider = { + .name = "npcm7xx-clock-divider", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(clock_in, NPCM7xxClockDividerState), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_clk = { + .name = "npcm7xx-clk", + .version_id = 1, + .minimum_version_id = 1, + .post_load = npcm7xx_clk_post_load, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS), + VMSTATE_INT64(ref_ns, NPCM7xxCLKState), + VMSTATE_CLOCK(clkref, NPCM7xxCLKState), + VMSTATE_END_OF_LIST(), + }, +}; + +static void npcm7xx_clk_pll_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx Clock PLL Module"; + dc->vmsd = &vmstate_npcm7xx_clk_pll; +} + +static void npcm7xx_clk_sel_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx Clock SEL Module"; + dc->vmsd = &vmstate_npcm7xx_clk_sel; +} + +static void npcm7xx_clk_divider_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx Clock Divider Module"; + dc->vmsd = &vmstate_npcm7xx_clk_divider; +} + static void npcm7xx_clk_class_init(ObjectClass *klass, void *data) { ResettableClass *rc = RESETTABLE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_class_init(ObjectClass *klass, void *data) dc->desc = "NPCM7xx Clock Control Registers"; dc->vmsd = &vmstate_npcm7xx_clk; + dc->realize = npcm7xx_clk_realize; rc->phases.enter = npcm7xx_clk_enter_reset; } +static const TypeInfo npcm7xx_clk_pll_info = { + .name = TYPE_NPCM7XX_CLOCK_PLL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(NPCM7xxClockPLLState), + .instance_init = npcm7xx_clk_pll_init, + .class_init = npcm7xx_clk_pll_class_init, +}; + +static const TypeInfo npcm7xx_clk_sel_info = { + .name = TYPE_NPCM7XX_CLOCK_SEL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(NPCM7xxClockSELState), + .instance_init = npcm7xx_clk_sel_init, + .class_init = npcm7xx_clk_sel_class_init, +}; + +static const TypeInfo npcm7xx_clk_divider_info = { + .name = TYPE_NPCM7XX_CLOCK_DIVIDER, + .parent = TYPE_DEVICE, + .instance_size = sizeof(NPCM7xxClockDividerState), + .instance_init = npcm7xx_clk_divider_init, + .class_init = npcm7xx_clk_divider_class_init, +}; + static const TypeInfo npcm7xx_clk_info = { .name = TYPE_NPCM7XX_CLK, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_clk_info = { static void npcm7xx_clk_register_type(void) { + type_register_static(&npcm7xx_clk_pll_info); + type_register_static(&npcm7xx_clk_sel_info); + type_register_static(&npcm7xx_clk_divider_info); type_register_static(&npcm7xx_clk_info); } type_init(npcm7xx_clk_register_type); -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> This patch makes NPCM7XX Timer to use a the timer clock generated by the CLK module instead of the magic number TIMER_REF_HZ. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm7xx_clk.h | 6 ----- include/hw/timer/npcm7xx_timer.h | 1 + hw/arm/npcm7xx.c | 5 ++++ hw/timer/npcm7xx_timer.c | 39 +++++++++++++++----------------- 4 files changed, 24 insertions(+), 27 deletions(-) diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ #include "hw/clock.h" #include "hw/sysbus.h" -/* - * The reference clock frequency for the timer modules, and the SECCNT and - * CNTR25M registers in this module, is always 25 MHz. - */ -#define NPCM7XX_TIMER_REF_HZ (25000000) - /* * Number of registers in our device state structure. Don't change this without * incrementing the version_id in the vmstate. diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/npcm7xx_timer.h +++ b/include/hw/timer/npcm7xx_timer.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxTimerCtrlState { uint32_t tisr; + Clock *clock; NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL]; NPCM7xxWatchdogTimer watchdog_timer; }; diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/serial.h" #include "hw/loader.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "hw/qdev-properties.h" #include "qapi/error.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) int first_irq; int j; + /* Connect the timer clock. */ + qdev_connect_clock_in(DEVICE(&s->tim[i]), "clock", qdev_get_clock_out( + DEVICE(&s->clk), "timer-clock")); + sysbus_realize(sbd, &error_abort); sysbus_mmio_map(sbd, 0, npcm7xx_tim_addr[i]); diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" #include "hw/qdev-properties.h" -#include "hw/misc/npcm7xx_clk.h" #include "hw/timer/npcm7xx_timer.h" #include "migration/vmstate.h" #include "qemu/bitops.h" @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_tcsr_prescaler(uint32_t tcsr) /* Convert a timer cycle count to a time interval in nanoseconds. */ static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count) { - int64_t ns = count; + int64_t ticks = count; - ns *= NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ; - ns *= npcm7xx_tcsr_prescaler(t->tcsr); + ticks *= npcm7xx_tcsr_prescaler(t->tcsr); - return ns; + return clock_ticks_to_ns(t->ctrl->clock, ticks); } /* Convert a time interval in nanoseconds to a timer cycle count. */ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) { - int64_t count; - - count = ns / (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ); - count /= npcm7xx_tcsr_prescaler(t->tcsr); - - return count; + return ns / clock_ticks_to_ns(t->ctrl->clock, + npcm7xx_tcsr_prescaler(t->tcsr)); } static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t) @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t) static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t, int64_t cycles) { - uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t); - int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles; + int64_t ticks = cycles * npcm7xx_watchdog_timer_prescaler(t); + int64_t ns = clock_ticks_to_ns(t->ctrl->clock, ticks); /* * The reset function always clears the current timer. The caller of the @@ -XXX,XX +XXX,XX @@ static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t, */ npcm7xx_timer_clear(&t->base_timer); - ns *= prescaler; t->base_timer.remaining_ns = ns; } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_hold_reset(Object *obj) qemu_irq_lower(s->watchdog_timer.irq); } -static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) +static void npcm7xx_timer_init(Object *obj) { - NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev); - SysBusDevice *sbd = &s->parent; + NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj); + DeviceState *dev = DEVICE(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); int i; NPCM7xxWatchdogTimer *w; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) npcm7xx_watchdog_timer_expired, w); sysbus_init_irq(sbd, &w->irq); - memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s, + memory_region_init_io(&s->iomem, obj, &npcm7xx_timer_ops, s, TYPE_NPCM7XX_TIMER, 4 * KiB); sysbus_init_mmio(sbd, &s->iomem); qdev_init_gpio_out_named(dev, &w->reset_signal, NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1); + s->clock = qdev_init_clock_in(dev, "clock", NULL, NULL); } static const VMStateDescription vmstate_npcm7xx_base_timer = { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_watchdog_timer = { static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { .name = "npcm7xx-timer-ctrl", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState), + VMSTATE_CLOCK(clock, NPCM7xxTimerCtrlState), VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState, NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer, NPCM7xxTimer), @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_class_init(ObjectClass *klass, void *data) QEMU_BUILD_BUG_ON(NPCM7XX_TIMER_REGS_END > NPCM7XX_TIMER_NR_REGS); dc->desc = "NPCM7xx Timer Controller"; - dc->realize = npcm7xx_timer_realize; dc->vmsd = &vmstate_npcm7xx_timer_ctrl; rc->phases.enter = npcm7xx_timer_enter_reset; rc->phases.hold = npcm7xx_timer_hold_reset; @@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(NPCM7xxTimerCtrlState), .class_init = npcm7xx_timer_class_init, + .instance_init = npcm7xx_timer_init, }; static void npcm7xx_timer_register_type(void) -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> The ADC is part of NPCM7XX Module. Its behavior is controled by the ADC_CON register. It converts one of the eight analog inputs into a digital input and stores it in the ADC_DATA register when enabled. Users can alter input value by using qom-set QMP command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-4-wuhaotsh@google.com [PMM: Added missing hw/adc/trace.h file] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- meson.build | 1 + hw/adc/trace.h | 1 + include/hw/adc/npcm7xx_adc.h | 69 ++++++ include/hw/arm/npcm7xx.h | 2 + hw/adc/npcm7xx_adc.c | 301 ++++++++++++++++++++++++++ hw/arm/npcm7xx.c | 24 ++- tests/qtest/npcm7xx_adc-test.c | 377 +++++++++++++++++++++++++++++++++ hw/adc/meson.build | 1 + hw/adc/trace-events | 5 + tests/qtest/meson.build | 3 +- 11 files changed, 783 insertions(+), 3 deletions(-) create mode 100644 hw/adc/trace.h create mode 100644 include/hw/adc/npcm7xx_adc.h create mode 100644 hw/adc/npcm7xx_adc.c create mode 100644 tests/qtest/npcm7xx_adc-test.c create mode 100644 hw/adc/trace-events diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Random Number Generator (RNG) * USB host (USBH) * GPIO controller + * Analog to Digital Converter (ADC) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * USB device (USBD) * SMBus controller (SMBF) * Peripheral SPI controller (PSPI) - * Analog to Digital Converter (ADC) * SD/MMC host * PECI interface * Pulse Width Modulation (PWM) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ if have_system 'chardev', 'hw/9pfs', 'hw/acpi', + 'hw/adc', 'hw/alpha', 'hw/arm', 'hw/audio', diff --git a/hw/adc/trace.h b/hw/adc/trace.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/adc/trace.h @@ -0,0 +1 @@ +#include "trace/trace-hw_adc.h" diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/adc/npcm7xx_adc.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx ADC Module + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM7XX_ADC_H +#define NPCM7XX_ADC_H + +#include "hw/clock.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "qemu/timer.h" + +#define NPCM7XX_ADC_NUM_INPUTS 8 +/** + * This value should not be changed unless write_adc_calibration function in + * hw/arm/npcm7xx.c is also changed. + */ +#define NPCM7XX_ADC_NUM_CALIB 2 + +/** + * struct NPCM7xxADCState - Analog to Digital Converter Module device state. + * @parent: System bus device. + * @iomem: Memory region through which registers are accessed. + * @conv_timer: The timer counts down remaining cycles for the conversion. + * @irq: GIC interrupt line to fire on expiration (if enabled). + * @con: The Control Register. + * @data: The Data Buffer. + * @clock: The ADC Clock. + * @adci: The input voltage in units of uV. 1uv = 1e-6V. + * @vref: The external reference voltage. + * @iref: The internal reference voltage, initialized at launch time. + * @rv: The calibrated output values of 0.5V and 1.5V for the ADC. + */ +typedef struct { + SysBusDevice parent; + + MemoryRegion iomem; + + QEMUTimer conv_timer; + + qemu_irq irq; + uint32_t con; + uint32_t data; + Clock *clock; + + /* Voltages are in unit of uV. 1V = 1000000uV. */ + uint32_t adci[NPCM7XX_ADC_NUM_INPUTS]; + uint32_t vref; + uint32_t iref; + + uint16_t calibration_r_values[NPCM7XX_ADC_NUM_CALIB]; +} NPCM7xxADCState; + +#define TYPE_NPCM7XX_ADC "npcm7xx-adc" +#define NPCM7XX_ADC(obj) \ + OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC) + +#endif /* NPCM7XX_ADC_H */ diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_H #include "hw/boards.h" +#include "hw/adc/npcm7xx_adc.h" #include "hw/cpu/a9mpcore.h" #include "hw/gpio/npcm7xx_gpio.h" #include "hw/mem/npcm7xx_mc.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxGCRState gcr; NPCM7xxCLKState clk; NPCM7xxTimerCtrlState tim[3]; + NPCM7xxADCState adc; NPCM7xxOTPState key_storage; NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; diff --git a/hw/adc/npcm7xx_adc.c b/hw/adc/npcm7xx_adc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/adc/npcm7xx_adc.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx ADC Module + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "hw/adc/npcm7xx_adc.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/registerfields.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/timer.h" +#include "qemu/units.h" +#include "trace.h" + +REG32(NPCM7XX_ADC_CON, 0x0) +REG32(NPCM7XX_ADC_DATA, 0x4) + +/* Register field definitions. */ +#define NPCM7XX_ADC_CON_MUX(rv) extract32(rv, 24, 4) +#define NPCM7XX_ADC_CON_INT_EN BIT(21) +#define NPCM7XX_ADC_CON_REFSEL BIT(19) +#define NPCM7XX_ADC_CON_INT BIT(18) +#define NPCM7XX_ADC_CON_EN BIT(17) +#define NPCM7XX_ADC_CON_RST BIT(16) +#define NPCM7XX_ADC_CON_CONV BIT(14) +#define NPCM7XX_ADC_CON_DIV(rv) extract32(rv, 1, 8) + +#define NPCM7XX_ADC_MAX_RESULT 1023 +#define NPCM7XX_ADC_DEFAULT_IREF 2000000 +#define NPCM7XX_ADC_CONV_CYCLES 20 +#define NPCM7XX_ADC_RESET_CYCLES 10 +#define NPCM7XX_ADC_R0_INPUT 500000 +#define NPCM7XX_ADC_R1_INPUT 1500000 + +static void npcm7xx_adc_reset(NPCM7xxADCState *s) +{ + timer_del(&s->conv_timer); + s->con = 0x000c0001; + s->data = 0x00000000; +} + +static uint32_t npcm7xx_adc_convert(uint32_t input, uint32_t ref) +{ + uint32_t result; + + result = input * (NPCM7XX_ADC_MAX_RESULT + 1) / ref; + if (result > NPCM7XX_ADC_MAX_RESULT) { + result = NPCM7XX_ADC_MAX_RESULT; + } + + return result; +} + +static uint32_t npcm7xx_adc_prescaler(NPCM7xxADCState *s) +{ + return 2 * (NPCM7XX_ADC_CON_DIV(s->con) + 1); +} + +static void npcm7xx_adc_start_timer(Clock *clk, QEMUTimer *timer, + uint32_t cycles, uint32_t prescaler) +{ + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + int64_t ticks = cycles; + int64_t ns; + + ticks *= prescaler; + ns = clock_ticks_to_ns(clk, ticks); + ns += now; + timer_mod(timer, ns); +} + +static void npcm7xx_adc_start_convert(NPCM7xxADCState *s) +{ + uint32_t prescaler = npcm7xx_adc_prescaler(s); + + npcm7xx_adc_start_timer(s->clock, &s->conv_timer, NPCM7XX_ADC_CONV_CYCLES, + prescaler); +} + +static void npcm7xx_adc_convert_done(void *opaque) +{ + NPCM7xxADCState *s = opaque; + uint32_t input = NPCM7XX_ADC_CON_MUX(s->con); + uint32_t ref = (s->con & NPCM7XX_ADC_CON_REFSEL) + ? s->iref : s->vref; + + if (input >= NPCM7XX_ADC_NUM_INPUTS) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid input: %u\n", + __func__, input); + return; + } + s->data = npcm7xx_adc_convert(s->adci[input], ref); + if (s->con & NPCM7XX_ADC_CON_INT_EN) { + s->con |= NPCM7XX_ADC_CON_INT; + qemu_irq_raise(s->irq); + } + s->con &= ~NPCM7XX_ADC_CON_CONV; +} + +static void npcm7xx_adc_calibrate(NPCM7xxADCState *adc) +{ + adc->calibration_r_values[0] = npcm7xx_adc_convert(NPCM7XX_ADC_R0_INPUT, + adc->iref); + adc->calibration_r_values[1] = npcm7xx_adc_convert(NPCM7XX_ADC_R1_INPUT, + adc->iref); +} + +static void npcm7xx_adc_write_con(NPCM7xxADCState *s, uint32_t new_con) +{ + uint32_t old_con = s->con; + + /* Write ADC_INT to 1 to clear it */ + if (new_con & NPCM7XX_ADC_CON_INT) { + new_con &= ~NPCM7XX_ADC_CON_INT; + qemu_irq_lower(s->irq); + } else if (old_con & NPCM7XX_ADC_CON_INT) { + new_con |= NPCM7XX_ADC_CON_INT; + } + + s->con = new_con; + + if (s->con & NPCM7XX_ADC_CON_RST) { + npcm7xx_adc_reset(s); + return; + } + + if ((s->con & NPCM7XX_ADC_CON_EN)) { + if (s->con & NPCM7XX_ADC_CON_CONV) { + if (!(old_con & NPCM7XX_ADC_CON_CONV)) { + npcm7xx_adc_start_convert(s); + } + } else { + timer_del(&s->conv_timer); + } + } +} + +static uint64_t npcm7xx_adc_read(void *opaque, hwaddr offset, unsigned size) +{ + uint64_t value = 0; + NPCM7xxADCState *s = opaque; + + switch (offset) { + case A_NPCM7XX_ADC_CON: + value = s->con; + break; + + case A_NPCM7XX_ADC_DATA: + value = s->data; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid offset 0x%04" HWADDR_PRIx "\n", + __func__, offset); + break; + } + + trace_npcm7xx_adc_read(DEVICE(s)->canonical_path, offset, value); + return value; +} + +static void npcm7xx_adc_write(void *opaque, hwaddr offset, uint64_t v, + unsigned size) +{ + NPCM7xxADCState *s = opaque; + + trace_npcm7xx_adc_write(DEVICE(s)->canonical_path, offset, v); + switch (offset) { + case A_NPCM7XX_ADC_CON: + npcm7xx_adc_write_con(s, v); + break; + + case A_NPCM7XX_ADC_DATA: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n", + __func__, offset); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid offset 0x%04" HWADDR_PRIx "\n", + __func__, offset); + break; + } + +} + +static const struct MemoryRegionOps npcm7xx_adc_ops = { + .read = npcm7xx_adc_read, + .write = npcm7xx_adc_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void npcm7xx_adc_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxADCState *s = NPCM7XX_ADC(obj); + + npcm7xx_adc_reset(s); +} + +static void npcm7xx_adc_hold_reset(Object *obj) +{ + NPCM7xxADCState *s = NPCM7XX_ADC(obj); + + qemu_irq_lower(s->irq); +} + +static void npcm7xx_adc_init(Object *obj) +{ + NPCM7xxADCState *s = NPCM7XX_ADC(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + int i; + + sysbus_init_irq(sbd, &s->irq); + + timer_init_ns(&s->conv_timer, QEMU_CLOCK_VIRTUAL, + npcm7xx_adc_convert_done, s); + memory_region_init_io(&s->iomem, obj, &npcm7xx_adc_ops, s, + TYPE_NPCM7XX_ADC, 4 * KiB); + sysbus_init_mmio(sbd, &s->iomem); + s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL); + + for (i = 0; i < NPCM7XX_ADC_NUM_INPUTS; ++i) { + object_property_add_uint32_ptr(obj, "adci[*]", + &s->adci[i], OBJ_PROP_FLAG_WRITE); + } + object_property_add_uint32_ptr(obj, "vref", + &s->vref, OBJ_PROP_FLAG_WRITE); + npcm7xx_adc_calibrate(s); +} + +static const VMStateDescription vmstate_npcm7xx_adc = { + .name = "npcm7xx-adc", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_TIMER(conv_timer, NPCM7xxADCState), + VMSTATE_UINT32(con, NPCM7xxADCState), + VMSTATE_UINT32(data, NPCM7xxADCState), + VMSTATE_CLOCK(clock, NPCM7xxADCState), + VMSTATE_UINT32_ARRAY(adci, NPCM7xxADCState, NPCM7XX_ADC_NUM_INPUTS), + VMSTATE_UINT32(vref, NPCM7xxADCState), + VMSTATE_UINT32(iref, NPCM7xxADCState), + VMSTATE_UINT16_ARRAY(calibration_r_values, NPCM7xxADCState, + NPCM7XX_ADC_NUM_CALIB), + VMSTATE_END_OF_LIST(), + }, +}; + +static Property npcm7xx_timer_properties[] = { + DEFINE_PROP_UINT32("iref", NPCM7xxADCState, iref, NPCM7XX_ADC_DEFAULT_IREF), + DEFINE_PROP_END_OF_LIST(), +}; + +static void npcm7xx_adc_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx ADC Module"; + dc->vmsd = &vmstate_npcm7xx_adc; + rc->phases.enter = npcm7xx_adc_enter_reset; + rc->phases.hold = npcm7xx_adc_hold_reset; + + device_class_set_props(dc, npcm7xx_timer_properties); +} + +static const TypeInfo npcm7xx_adc_info = { + .name = TYPE_NPCM7XX_ADC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxADCState), + .class_init = npcm7xx_adc_class_init, + .instance_init = npcm7xx_adc_init, +}; + +static void npcm7xx_adc_register_types(void) +{ + type_register_static(&npcm7xx_adc_info); +} + +type_init(npcm7xx_adc_register_types); diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_EHCI_BA (0xf0806000) #define NPCM7XX_OHCI_BA (0xf0807000) +/* ADC Module */ +#define NPCM7XX_ADC_BA (0xf000c000) + /* Internal AHB SRAM */ #define NPCM7XX_RAM3_BA (0xc0008000) #define NPCM7XX_RAM3_SZ (4 * KiB) @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_ROM_BA (0xffff0000) #define NPCM7XX_ROM_SZ (64 * KiB) + /* Clock configuration values to be fixed up when bypassing bootloader */ /* Run PLL1 at 1600 MHz */ @@ -XXX,XX +XXX,XX @@ * interrupts. */ enum NPCM7xxInterrupt { + NPCM7XX_ADC_IRQ = 0, NPCM7XX_UART0_IRQ = 2, NPCM7XX_UART1_IRQ, NPCM7XX_UART2_IRQ, @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init_fuses(NPCM7xxState *s) sizeof(value)); } +static void npcm7xx_write_adc_calibration(NPCM7xxState *s) +{ + /* Both ADC and the fuse array must have realized. */ + QEMU_BUILD_BUG_ON(sizeof(s->adc.calibration_r_values) != 4); + npcm7xx_otp_array_write(&s->fuse_array, s->adc.calibration_r_values, + NPCM7XX_FUSE_ADC_CALIB, sizeof(s->adc.calibration_r_values)); +} + static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n) { return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) TYPE_NPCM7XX_FUSE_ARRAY); object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC); object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG); + object_initialize_child(obj, "adc", &s->adc, TYPE_NPCM7XX_ADC); for (i = 0; i < ARRAY_SIZE(s->tim); i++) { object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->mc), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->mc), 0, NPCM7XX_MC_BA); + /* ADC Modules. Cannot fail. */ + qdev_connect_clock_in(DEVICE(&s->adc), "clock", qdev_get_clock_out( + DEVICE(&s->clk), "adc-clock")); + sysbus_realize(SYS_BUS_DEVICE(&s->adc), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->adc), 0, NPCM7XX_ADC_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->adc), 0, + npcm7xx_irq(s, NPCM7XX_ADC_IRQ)); + npcm7xx_write_adc_calibration(s); + /* Timer Modules (TIM). Cannot fail. */ QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim)); for (i = 0; i < ARRAY_SIZE(s->tim); i++) { @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); create_unimplemented_device("npcm7xx.kcs", 0xf0007000, 4 * KiB); - create_unimplemented_device("npcm7xx.adc", 0xf000c000, 4 * KiB); create_unimplemented_device("npcm7xx.gfxi", 0xf000e000, 4 * KiB); create_unimplemented_device("npcm7xx.gpio[0]", 0xf0010000, 4 * KiB); create_unimplemented_device("npcm7xx.gpio[1]", 0xf0011000, 4 * KiB); diff --git a/tests/qtest/npcm7xx_adc-test.c b/tests/qtest/npcm7xx_adc-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_adc-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx ADCModules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/bitops.h" +#include "qemu/timer.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" + +#define REF_HZ (25000000) + +#define CON_OFFSET 0x0 +#define DATA_OFFSET 0x4 + +#define NUM_INPUTS 8 +#define DEFAULT_IREF 2000000 +#define CONV_CYCLES 20 +#define RESET_CYCLES 10 +#define R0_INPUT 500000 +#define R1_INPUT 1500000 +#define MAX_RESULT 1023 + +#define DEFAULT_CLKDIV 5 + +#define FUSE_ARRAY_BA 0xf018a000 +#define FCTL_OFFSET 0x14 +#define FST_OFFSET 0x0 +#define FADDR_OFFSET 0x4 +#define FDATA_OFFSET 0x8 +#define ADC_CALIB_ADDR 24 +#define FUSE_READ 0x2 + +/* Register field definitions. */ +#define CON_MUX(rv) ((rv) << 24) +#define CON_INT_EN BIT(21) +#define CON_REFSEL BIT(19) +#define CON_INT BIT(18) +#define CON_EN BIT(17) +#define CON_RST BIT(16) +#define CON_CONV BIT(14) +#define CON_DIV(rv) extract32(rv, 1, 8) + +#define FST_RDST BIT(1) +#define FDATA_MASK 0xff + +#define MAX_ERROR 10000 +#define MIN_CALIB_INPUT 100000 +#define MAX_CALIB_INPUT 1800000 + +static const uint32_t input_list[] = { + 100000, + 500000, + 1000000, + 1500000, + 1800000, + 2000000, +}; + +static const uint32_t vref_list[] = { + 2000000, + 2200000, + 2500000, +}; + +static const uint32_t iref_list[] = { + 1800000, + 1900000, + 2000000, + 2100000, + 2200000, +}; + +static const uint32_t div_list[] = {0, 1, 3, 7, 15}; + +typedef struct ADC { + int irq; + uint64_t base_addr; +} ADC; + +ADC adc = { + .irq = 0, + .base_addr = 0xf000c000 +}; + +static uint32_t adc_read_con(QTestState *qts, const ADC *adc) +{ + return qtest_readl(qts, adc->base_addr + CON_OFFSET); +} + +static void adc_write_con(QTestState *qts, const ADC *adc, uint32_t value) +{ + qtest_writel(qts, adc->base_addr + CON_OFFSET, value); +} + +static uint32_t adc_read_data(QTestState *qts, const ADC *adc) +{ + return qtest_readl(qts, adc->base_addr + DATA_OFFSET); +} + +static uint32_t adc_calibrate(uint32_t measured, uint32_t *rv) +{ + return R0_INPUT + (R1_INPUT - R0_INPUT) * (int32_t)(measured - rv[0]) + / (int32_t)(rv[1] - rv[0]); +} + +static void adc_qom_set(QTestState *qts, const ADC *adc, + const char *name, uint32_t value) +{ + QDict *response; + const char *path = "/machine/soc/adc"; + + g_test_message("Setting properties %s of %s with value %u", + name, path, value); + response = qtest_qmp(qts, "{ 'execute': 'qom-set'," + " 'arguments': { 'path': %s, 'property': %s, 'value': %u}}", + path, name, value); + /* The qom set message returns successfully. */ + g_assert_true(qdict_haskey(response, "return")); +} + +static void adc_write_input(QTestState *qts, const ADC *adc, + uint32_t index, uint32_t value) +{ + char name[100]; + + sprintf(name, "adci[%u]", index); + adc_qom_set(qts, adc, name, value); +} + +static void adc_write_vref(QTestState *qts, const ADC *adc, uint32_t value) +{ + adc_qom_set(qts, adc, "vref", value); +} + +static uint32_t adc_calculate_output(uint32_t input, uint32_t ref) +{ + uint32_t output; + + g_assert_cmpuint(input, <=, ref); + output = (input * (MAX_RESULT + 1)) / ref; + if (output > MAX_RESULT) { + output = MAX_RESULT; + } + + return output; +} + +static uint32_t adc_prescaler(QTestState *qts, const ADC *adc) +{ + uint32_t div = extract32(adc_read_con(qts, adc), 1, 8); + + return 2 * (div + 1); +} + +static int64_t adc_calculate_steps(uint32_t cycles, uint32_t prescale, + uint32_t clkdiv) +{ + return (NANOSECONDS_PER_SECOND / (REF_HZ >> clkdiv)) * cycles * prescale; +} + +static void adc_wait_conv_finished(QTestState *qts, const ADC *adc, + uint32_t clkdiv) +{ + uint32_t prescaler = adc_prescaler(qts, adc); + + /* + * ADC should takes roughly 20 cycles to convert one sample. So we assert it + * should take 10~30 cycles here. + */ + qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES / 2, prescaler, + clkdiv)); + /* ADC is still converting. */ + g_assert_true(adc_read_con(qts, adc) & CON_CONV); + qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES, prescaler, clkdiv)); + /* ADC has finished conversion. */ + g_assert_false(adc_read_con(qts, adc) & CON_CONV); +} + +/* Check ADC can be reset to default value. */ +static void test_init(gconstpointer adc_p) +{ + const ADC *adc = adc_p; + + QTestState *qts = qtest_init("-machine quanta-gsj"); + adc_write_con(qts, adc, CON_REFSEL | CON_INT); + g_assert_cmphex(adc_read_con(qts, adc), ==, CON_REFSEL); + qtest_quit(qts); +} + +/* Check ADC can convert from an internal reference. */ +static void test_convert_internal(gconstpointer adc_p) +{ + const ADC *adc = adc_p; + uint32_t index, input, output, expected_output; + QTestState *qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + for (index = 0; index < NUM_INPUTS; ++index) { + for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) { + input = input_list[i]; + expected_output = adc_calculate_output(input, DEFAULT_IREF); + + adc_write_input(qts, adc, index, input); + adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT | + CON_EN | CON_CONV); + adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV); + g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) | + CON_REFSEL | CON_EN); + g_assert_false(qtest_get_irq(qts, adc->irq)); + output = adc_read_data(qts, adc); + g_assert_cmpuint(output, ==, expected_output); + } + } + + qtest_quit(qts); +} + +/* Check ADC can convert from an external reference. */ +static void test_convert_external(gconstpointer adc_p) +{ + const ADC *adc = adc_p; + uint32_t index, input, vref, output, expected_output; + QTestState *qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + for (index = 0; index < NUM_INPUTS; ++index) { + for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) { + for (size_t j = 0; j < ARRAY_SIZE(vref_list); ++j) { + input = input_list[i]; + vref = vref_list[j]; + expected_output = adc_calculate_output(input, vref); + + adc_write_input(qts, adc, index, input); + adc_write_vref(qts, adc, vref); + adc_write_con(qts, adc, CON_MUX(index) | CON_INT | CON_EN | + CON_CONV); + adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV); + g_assert_cmphex(adc_read_con(qts, adc), ==, + CON_MUX(index) | CON_EN); + g_assert_false(qtest_get_irq(qts, adc->irq)); + output = adc_read_data(qts, adc); + g_assert_cmpuint(output, ==, expected_output); + } + } + } + + qtest_quit(qts); +} + +/* Check ADC interrupt files if and only if CON_INT_EN is set. */ +static void test_interrupt(gconstpointer adc_p) +{ + const ADC *adc = adc_p; + uint32_t index, input, output, expected_output; + QTestState *qts = qtest_init("-machine quanta-gsj"); + + index = 1; + input = input_list[1]; + expected_output = adc_calculate_output(input, DEFAULT_IREF); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + adc_write_input(qts, adc, index, input); + g_assert_false(qtest_get_irq(qts, adc->irq)); + adc_write_con(qts, adc, CON_MUX(index) | CON_INT_EN | CON_REFSEL | CON_INT + | CON_EN | CON_CONV); + adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV); + g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) | CON_INT_EN + | CON_REFSEL | CON_INT | CON_EN); + g_assert_true(qtest_get_irq(qts, adc->irq)); + output = adc_read_data(qts, adc); + g_assert_cmpuint(output, ==, expected_output); + + qtest_quit(qts); +} + +/* Check ADC is reset after setting ADC_RST for 10 ADC cycles. */ +static void test_reset(gconstpointer adc_p) +{ + const ADC *adc = adc_p; + QTestState *qts = qtest_init("-machine quanta-gsj"); + + for (size_t i = 0; i < ARRAY_SIZE(div_list); ++i) { + uint32_t div = div_list[i]; + + adc_write_con(qts, adc, CON_INT | CON_EN | CON_RST | CON_DIV(div)); + qtest_clock_step(qts, adc_calculate_steps(RESET_CYCLES, + adc_prescaler(qts, adc), DEFAULT_CLKDIV)); + g_assert_false(adc_read_con(qts, adc) & CON_EN); + } + qtest_quit(qts); +} + +/* Check ADC Calibration works as desired. */ +static void test_calibrate(gconstpointer adc_p) +{ + int i, j; + const ADC *adc = adc_p; + + for (j = 0; j < ARRAY_SIZE(iref_list); ++j) { + uint32_t iref = iref_list[j]; + uint32_t expected_rv[] = { + adc_calculate_output(R0_INPUT, iref), + adc_calculate_output(R1_INPUT, iref), + }; + char buf[100]; + QTestState *qts; + + sprintf(buf, "-machine quanta-gsj -global npcm7xx-adc.iref=%u", iref); + qts = qtest_init(buf); + + /* Check the converted value is correct using the calibration value. */ + for (i = 0; i < ARRAY_SIZE(input_list); ++i) { + uint32_t input; + uint32_t output; + uint32_t expected_output; + uint32_t calibrated_voltage; + uint32_t index = 0; + + input = input_list[i]; + /* Calibration only works for input range 0.1V ~ 1.8V. */ + if (input < MIN_CALIB_INPUT || input > MAX_CALIB_INPUT) { + continue; + } + expected_output = adc_calculate_output(input, iref); + + adc_write_input(qts, adc, index, input); + adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT | + CON_EN | CON_CONV); + adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV); + g_assert_cmphex(adc_read_con(qts, adc), ==, + CON_REFSEL | CON_MUX(index) | CON_EN); + output = adc_read_data(qts, adc); + g_assert_cmpuint(output, ==, expected_output); + + calibrated_voltage = adc_calibrate(output, expected_rv); + g_assert_cmpuint(calibrated_voltage, >, input - MAX_ERROR); + g_assert_cmpuint(calibrated_voltage, <, input + MAX_ERROR); + } + + qtest_quit(qts); + } +} + +static void adc_add_test(const char *name, const ADC* wd, + GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf("npcm7xx_adc/%s", name); + qtest_add_data_func(full_name, wd, fn); +} +#define add_test(name, td) adc_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + + add_test(init, &adc); + add_test(convert_internal, &adc); + add_test(convert_external, &adc); + add_test(interrupt, &adc); + add_test(reset, &adc); + add_test(calibrate, &adc); + + return g_test_run(); +} diff --git a/hw/adc/meson.build b/hw/adc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/adc/meson.build +++ b/hw/adc/meson.build @@ -1 +1,2 @@ softmmu_ss.add(when: 'CONFIG_STM32F2XX_ADC', if_true: files('stm32f2xx_adc.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_adc.c')) diff --git a/hw/adc/trace-events b/hw/adc/trace-events new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/adc/trace-events @@ -XXX,XX +XXX,XX @@ +# See docs/devel/tracing.txt for syntax documentation. + +# npcm7xx_adc.c +npcm7xx_adc_read(const char *id, uint64_t offset, uint32_t value) " %s offset: 0x%04" PRIx64 " value 0x%04" PRIx32 +npcm7xx_adc_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value 0x%04" PRIx32 diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ ['prom-env-test', 'boot-serial-test'] qtests_npcm7xx = \ - ['npcm7xx_gpio-test', + ['npcm7xx_adc-test', + 'npcm7xx_gpio-test', 'npcm7xx_rng-test', 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> The PWM module is part of NPCM7XX module. Each NPCM7XX module has two identical PWM modules. Each module contains 4 PWM entries. Each PWM has two outputs: frequency and duty_cycle. Both are computed using inputs from software side. This module does not model detail pulse signals since it is expensive. It also does not model interrupts and watchdogs that are dependant on the detail models. The interfaces for these are left in the module so that anyone in need for these functionalities can implement on their own. The user can read the duty cycle and frequency using qom-get command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-5-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/misc/npcm7xx_pwm.h | 105 +++++++ hw/arm/npcm7xx.c | 26 +- hw/misc/npcm7xx_pwm.c | 550 ++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 6 + 7 files changed, 689 insertions(+), 3 deletions(-) create mode 100644 include/hw/misc/npcm7xx_pwm.h create mode 100644 hw/misc/npcm7xx_pwm.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * USB host (USBH) * GPIO controller * Analog to Digital Converter (ADC) + * Pulse Width Modulation (PWM) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface - * Pulse Width Modulation (PWM) * Tachometer * PCI and PCIe root complex and bridges * VDM and MCTP support diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" +#include "hw/misc/npcm7xx_pwm.h" #include "hw/misc/npcm7xx_rng.h" #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxCLKState clk; NPCM7xxTimerCtrlState tim[3]; NPCM7xxADCState adc; + NPCM7xxPWMState pwm[2]; NPCM7xxOTPState key_storage; NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/npcm7xx_pwm.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx PWM Module + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM7XX_PWM_H +#define NPCM7XX_PWM_H + +#include "hw/clock.h" +#include "hw/sysbus.h" +#include "hw/irq.h" + +/* Each PWM module holds 4 PWM channels. */ +#define NPCM7XX_PWM_PER_MODULE 4 + +/* + * Number of registers in one pwm module. Don't change this without increasing + * the version_id in vmstate. + */ +#define NPCM7XX_PWM_NR_REGS (0x54 / sizeof(uint32_t)) + +/* + * The maximum duty values. Each duty unit represents 1/NPCM7XX_PWM_MAX_DUTY + * cycles. For example, if NPCM7XX_PWM_MAX_DUTY=1,000,000 and a PWM has a duty + * value of 100,000 the duty cycle for that PWM is 10%. + */ +#define NPCM7XX_PWM_MAX_DUTY 1000000 + +typedef struct NPCM7xxPWMState NPCM7xxPWMState; + +/** + * struct NPCM7xxPWM - The state of a single PWM channel. + * @module: The PWM module that contains this channel. + * @irq: GIC interrupt line to fire on expiration if enabled. + * @running: Whether this PWM channel is generating output. + * @inverted: Whether this PWM channel is inverted. + * @index: The index of this PWM channel. + * @cnr: The counter register. + * @cmr: The comparator register. + * @pdr: The data register. + * @pwdr: The watchdog register. + * @freq: The frequency of this PWM channel. + * @duty: The duty cycle of this PWM channel. One unit represents + * 1/NPCM7XX_MAX_DUTY cycles. + */ +typedef struct NPCM7xxPWM { + NPCM7xxPWMState *module; + + qemu_irq irq; + + bool running; + bool inverted; + + uint8_t index; + uint32_t cnr; + uint32_t cmr; + uint32_t pdr; + uint32_t pwdr; + + uint32_t freq; + uint32_t duty; +} NPCM7xxPWM; + +/** + * struct NPCM7xxPWMState - Pulse Width Modulation device state. + * @parent: System bus device. + * @iomem: Memory region through which registers are accessed. + * @clock: The PWM clock. + * @pwm: The PWM channels owned by this module. + * @ppr: The prescaler register. + * @csr: The clock selector register. + * @pcr: The control register. + * @pier: The interrupt enable register. + * @piir: The interrupt indication register. + */ +struct NPCM7xxPWMState { + SysBusDevice parent; + + MemoryRegion iomem; + + Clock *clock; + NPCM7xxPWM pwm[NPCM7XX_PWM_PER_MODULE]; + + uint32_t ppr; + uint32_t csr; + uint32_t pcr; + uint32_t pier; + uint32_t piir; +}; + +#define TYPE_NPCM7XX_PWM "npcm7xx-pwm" +#define NPCM7XX_PWM(obj) \ + OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM) + +#endif /* NPCM7XX_PWM_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ NPCM7XX_EHCI_IRQ = 61, NPCM7XX_OHCI_IRQ = 62, + NPCM7XX_PWM0_IRQ = 93, /* PWM module 0 */ + NPCM7XX_PWM1_IRQ, /* PWM module 1 */ NPCM7XX_GPIO0_IRQ = 116, NPCM7XX_GPIO1_IRQ, NPCM7XX_GPIO2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_fiu3_flash_addr[] = { 0xb8000000, /* CS3 */ }; +/* Register base address for each PWM Module */ +static const hwaddr npcm7xx_pwm_addr[] = { + 0xf0103000, + 0xf0104000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i], TYPE_NPCM7XX_FIU); } + + for (i = 0; i < ARRAY_SIZE(s->pwm); i++) { + object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM); + } } static void npcm7xx_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci), 0, npcm7xx_irq(s, NPCM7XX_OHCI_IRQ)); + /* PWM Modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pwm_addr) != ARRAY_SIZE(s->pwm)); + for (i = 0; i < ARRAY_SIZE(s->pwm); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pwm[i]); + + qdev_connect_clock_in(DEVICE(&s->pwm[i]), "clock", qdev_get_clock_out( + DEVICE(&s->clk), "apb3-clock")); + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pwm_addr[i]); + sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i)); + } + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pwm[0]", 0xf0103000, 4 * KiB); - create_unimplemented_device("npcm7xx.pwm[1]", 0xf0104000, 4 * KiB); create_unimplemented_device("npcm7xx.mft[0]", 0xf0180000, 4 * KiB); create_unimplemented_device("npcm7xx.mft[1]", 0xf0181000, 4 * KiB); create_unimplemented_device("npcm7xx.mft[2]", 0xf0182000, 4 * KiB); diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx PWM Module + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/misc/npcm7xx_pwm.h" +#include "hw/registerfields.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "trace.h" + +REG32(NPCM7XX_PWM_PPR, 0x00); +REG32(NPCM7XX_PWM_CSR, 0x04); +REG32(NPCM7XX_PWM_PCR, 0x08); +REG32(NPCM7XX_PWM_CNR0, 0x0c); +REG32(NPCM7XX_PWM_CMR0, 0x10); +REG32(NPCM7XX_PWM_PDR0, 0x14); +REG32(NPCM7XX_PWM_CNR1, 0x18); +REG32(NPCM7XX_PWM_CMR1, 0x1c); +REG32(NPCM7XX_PWM_PDR1, 0x20); +REG32(NPCM7XX_PWM_CNR2, 0x24); +REG32(NPCM7XX_PWM_CMR2, 0x28); +REG32(NPCM7XX_PWM_PDR2, 0x2c); +REG32(NPCM7XX_PWM_CNR3, 0x30); +REG32(NPCM7XX_PWM_CMR3, 0x34); +REG32(NPCM7XX_PWM_PDR3, 0x38); +REG32(NPCM7XX_PWM_PIER, 0x3c); +REG32(NPCM7XX_PWM_PIIR, 0x40); +REG32(NPCM7XX_PWM_PWDR0, 0x44); +REG32(NPCM7XX_PWM_PWDR1, 0x48); +REG32(NPCM7XX_PWM_PWDR2, 0x4c); +REG32(NPCM7XX_PWM_PWDR3, 0x50); + +/* Register field definitions. */ +#define NPCM7XX_PPR(rv, index) extract32((rv), npcm7xx_ppr_base[index], 8) +#define NPCM7XX_CSR(rv, index) extract32((rv), npcm7xx_csr_base[index], 3) +#define NPCM7XX_CH(rv, index) extract32((rv), npcm7xx_ch_base[index], 4) +#define NPCM7XX_CH_EN BIT(0) +#define NPCM7XX_CH_INV BIT(2) +#define NPCM7XX_CH_MOD BIT(3) + +/* Offset of each PWM channel's prescaler in the PPR register. */ +static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; +/* Offset of each PWM channel's clock selector in the CSR register. */ +static const int npcm7xx_csr_base[] = { 0, 4, 8, 12 }; +/* Offset of each PWM channel's control variable in the PCR register. */ +static const int npcm7xx_ch_base[] = { 0, 8, 12, 16 }; + +static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) +{ + uint32_t ppr; + uint32_t csr; + uint32_t freq; + + if (!p->running) { + return 0; + } + + csr = NPCM7XX_CSR(p->module->csr, p->index); + ppr = NPCM7XX_PPR(p->module->ppr, p->index); + freq = clock_get_hz(p->module->clock); + freq /= ppr + 1; + /* csr can only be 0~4 */ + if (csr > 4) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid csr value %u\n", + __func__, csr); + csr = 4; + } + /* freq won't be changed if csr == 4. */ + if (csr < 4) { + freq >>= csr + 1; + } + + return freq / (p->cnr + 1); +} + +static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) +{ + uint64_t duty; + + if (p->running) { + if (p->cnr == 0) { + duty = 0; + } else if (p->cmr >= p->cnr) { + duty = NPCM7XX_PWM_MAX_DUTY; + } else { + duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + } + } else { + duty = 0; + } + + if (p->inverted) { + duty = NPCM7XX_PWM_MAX_DUTY - duty; + } + + return duty; +} + +static void npcm7xx_pwm_update_freq(NPCM7xxPWM *p) +{ + uint32_t freq = npcm7xx_pwm_calculate_freq(p); + + if (freq != p->freq) { + trace_npcm7xx_pwm_update_freq(DEVICE(p->module)->canonical_path, + p->index, p->freq, freq); + p->freq = freq; + } +} + +static void npcm7xx_pwm_update_duty(NPCM7xxPWM *p) +{ + uint32_t duty = npcm7xx_pwm_calculate_duty(p); + + if (duty != p->duty) { + trace_npcm7xx_pwm_update_duty(DEVICE(p->module)->canonical_path, + p->index, p->duty, duty); + p->duty = duty; + } +} + +static void npcm7xx_pwm_update_output(NPCM7xxPWM *p) +{ + npcm7xx_pwm_update_freq(p); + npcm7xx_pwm_update_duty(p); +} + +static void npcm7xx_pwm_write_ppr(NPCM7xxPWMState *s, uint32_t new_ppr) +{ + int i; + uint32_t old_ppr = s->ppr; + + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ppr_base) != NPCM7XX_PWM_PER_MODULE); + s->ppr = new_ppr; + for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) { + if (NPCM7XX_PPR(old_ppr, i) != NPCM7XX_PPR(new_ppr, i)) { + npcm7xx_pwm_update_freq(&s->pwm[i]); + } + } +} + +static void npcm7xx_pwm_write_csr(NPCM7xxPWMState *s, uint32_t new_csr) +{ + int i; + uint32_t old_csr = s->csr; + + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_csr_base) != NPCM7XX_PWM_PER_MODULE); + s->csr = new_csr; + for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) { + if (NPCM7XX_CSR(old_csr, i) != NPCM7XX_CSR(new_csr, i)) { + npcm7xx_pwm_update_freq(&s->pwm[i]); + } + } +} + +static void npcm7xx_pwm_write_pcr(NPCM7xxPWMState *s, uint32_t new_pcr) +{ + int i; + bool inverted; + uint32_t pcr; + NPCM7xxPWM *p; + + s->pcr = new_pcr; + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ch_base) != NPCM7XX_PWM_PER_MODULE); + for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) { + p = &s->pwm[i]; + pcr = NPCM7XX_CH(new_pcr, i); + inverted = pcr & NPCM7XX_CH_INV; + + /* + * We only run a PWM channel with toggle mode. Single-shot mode does not + * generate frequency and duty-cycle values. + */ + if ((pcr & NPCM7XX_CH_EN) && (pcr & NPCM7XX_CH_MOD)) { + if (p->running) { + /* Re-run this PWM channel if inverted changed. */ + if (p->inverted ^ inverted) { + p->inverted = inverted; + npcm7xx_pwm_update_duty(p); + } + } else { + /* Run this PWM channel. */ + p->running = true; + p->inverted = inverted; + npcm7xx_pwm_update_output(p); + } + } else { + /* Clear this PWM channel. */ + p->running = false; + p->inverted = inverted; + npcm7xx_pwm_update_output(p); + } + } + +} + +static hwaddr npcm7xx_cnr_index(hwaddr offset) +{ + switch (offset) { + case A_NPCM7XX_PWM_CNR0: + return 0; + case A_NPCM7XX_PWM_CNR1: + return 1; + case A_NPCM7XX_PWM_CNR2: + return 2; + case A_NPCM7XX_PWM_CNR3: + return 3; + default: + g_assert_not_reached(); + } +} + +static hwaddr npcm7xx_cmr_index(hwaddr offset) +{ + switch (offset) { + case A_NPCM7XX_PWM_CMR0: + return 0; + case A_NPCM7XX_PWM_CMR1: + return 1; + case A_NPCM7XX_PWM_CMR2: + return 2; + case A_NPCM7XX_PWM_CMR3: + return 3; + default: + g_assert_not_reached(); + } +} + +static hwaddr npcm7xx_pdr_index(hwaddr offset) +{ + switch (offset) { + case A_NPCM7XX_PWM_PDR0: + return 0; + case A_NPCM7XX_PWM_PDR1: + return 1; + case A_NPCM7XX_PWM_PDR2: + return 2; + case A_NPCM7XX_PWM_PDR3: + return 3; + default: + g_assert_not_reached(); + } +} + +static hwaddr npcm7xx_pwdr_index(hwaddr offset) +{ + switch (offset) { + case A_NPCM7XX_PWM_PWDR0: + return 0; + case A_NPCM7XX_PWM_PWDR1: + return 1; + case A_NPCM7XX_PWM_PWDR2: + return 2; + case A_NPCM7XX_PWM_PWDR3: + return 3; + default: + g_assert_not_reached(); + } +} + +static uint64_t npcm7xx_pwm_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCM7xxPWMState *s = opaque; + uint64_t value = 0; + + switch (offset) { + case A_NPCM7XX_PWM_CNR0: + case A_NPCM7XX_PWM_CNR1: + case A_NPCM7XX_PWM_CNR2: + case A_NPCM7XX_PWM_CNR3: + value = s->pwm[npcm7xx_cnr_index(offset)].cnr; + break; + + case A_NPCM7XX_PWM_CMR0: + case A_NPCM7XX_PWM_CMR1: + case A_NPCM7XX_PWM_CMR2: + case A_NPCM7XX_PWM_CMR3: + value = s->pwm[npcm7xx_cmr_index(offset)].cmr; + break; + + case A_NPCM7XX_PWM_PDR0: + case A_NPCM7XX_PWM_PDR1: + case A_NPCM7XX_PWM_PDR2: + case A_NPCM7XX_PWM_PDR3: + value = s->pwm[npcm7xx_pdr_index(offset)].pdr; + break; + + case A_NPCM7XX_PWM_PWDR0: + case A_NPCM7XX_PWM_PWDR1: + case A_NPCM7XX_PWM_PWDR2: + case A_NPCM7XX_PWM_PWDR3: + value = s->pwm[npcm7xx_pwdr_index(offset)].pwdr; + break; + + case A_NPCM7XX_PWM_PPR: + value = s->ppr; + break; + + case A_NPCM7XX_PWM_CSR: + value = s->csr; + break; + + case A_NPCM7XX_PWM_PCR: + value = s->pcr; + break; + + case A_NPCM7XX_PWM_PIER: + value = s->pier; + break; + + case A_NPCM7XX_PWM_PIIR: + value = s->piir; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid offset 0x%04" HWADDR_PRIx "\n", + __func__, offset); + break; + } + + trace_npcm7xx_pwm_read(DEVICE(s)->canonical_path, offset, value); + return value; +} + +static void npcm7xx_pwm_write(void *opaque, hwaddr offset, + uint64_t v, unsigned size) +{ + NPCM7xxPWMState *s = opaque; + NPCM7xxPWM *p; + uint32_t value = v; + + trace_npcm7xx_pwm_write(DEVICE(s)->canonical_path, offset, value); + switch (offset) { + case A_NPCM7XX_PWM_CNR0: + case A_NPCM7XX_PWM_CNR1: + case A_NPCM7XX_PWM_CNR2: + case A_NPCM7XX_PWM_CNR3: + p = &s->pwm[npcm7xx_cnr_index(offset)]; + p->cnr = value; + npcm7xx_pwm_update_output(p); + break; + + case A_NPCM7XX_PWM_CMR0: + case A_NPCM7XX_PWM_CMR1: + case A_NPCM7XX_PWM_CMR2: + case A_NPCM7XX_PWM_CMR3: + p = &s->pwm[npcm7xx_cmr_index(offset)]; + p->cmr = value; + npcm7xx_pwm_update_output(p); + break; + + case A_NPCM7XX_PWM_PDR0: + case A_NPCM7XX_PWM_PDR1: + case A_NPCM7XX_PWM_PDR2: + case A_NPCM7XX_PWM_PDR3: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n", + __func__, offset); + break; + + case A_NPCM7XX_PWM_PWDR0: + case A_NPCM7XX_PWM_PWDR1: + case A_NPCM7XX_PWM_PWDR2: + case A_NPCM7XX_PWM_PWDR3: + qemu_log_mask(LOG_UNIMP, + "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n", + __func__, offset); + break; + + case A_NPCM7XX_PWM_PPR: + npcm7xx_pwm_write_ppr(s, value); + break; + + case A_NPCM7XX_PWM_CSR: + npcm7xx_pwm_write_csr(s, value); + break; + + case A_NPCM7XX_PWM_PCR: + npcm7xx_pwm_write_pcr(s, value); + break; + + case A_NPCM7XX_PWM_PIER: + qemu_log_mask(LOG_UNIMP, + "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n", + __func__, offset); + break; + + case A_NPCM7XX_PWM_PIIR: + qemu_log_mask(LOG_UNIMP, + "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n", + __func__, offset); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid offset 0x%04" HWADDR_PRIx "\n", + __func__, offset); + break; + } +} + +static const struct MemoryRegionOps npcm7xx_pwm_ops = { + .read = npcm7xx_pwm_read, + .write = npcm7xx_pwm_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void npcm7xx_pwm_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxPWMState *s = NPCM7XX_PWM(obj); + int i; + + for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) { + NPCM7xxPWM *p = &s->pwm[i]; + + p->cnr = 0x00000000; + p->cmr = 0x00000000; + p->pdr = 0x00000000; + p->pwdr = 0x00000000; + } + + s->ppr = 0x00000000; + s->csr = 0x00000000; + s->pcr = 0x00000000; + s->pier = 0x00000000; + s->piir = 0x00000000; +} + +static void npcm7xx_pwm_hold_reset(Object *obj) +{ + NPCM7xxPWMState *s = NPCM7XX_PWM(obj); + int i; + + for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) { + qemu_irq_lower(s->pwm[i].irq); + } +} + +static void npcm7xx_pwm_init(Object *obj) +{ + NPCM7xxPWMState *s = NPCM7XX_PWM(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + int i; + + for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) { + NPCM7xxPWM *p = &s->pwm[i]; + p->module = s; + p->index = i; + sysbus_init_irq(sbd, &p->irq); + } + + memory_region_init_io(&s->iomem, obj, &npcm7xx_pwm_ops, s, + TYPE_NPCM7XX_PWM, 4 * KiB); + sysbus_init_mmio(sbd, &s->iomem); + s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL); + + for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) { + object_property_add_uint32_ptr(obj, "freq[*]", + &s->pwm[i].freq, OBJ_PROP_FLAG_READ); + object_property_add_uint32_ptr(obj, "duty[*]", + &s->pwm[i].duty, OBJ_PROP_FLAG_READ); + } +} + +static const VMStateDescription vmstate_npcm7xx_pwm = { + .name = "npcm7xx-pwm", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_BOOL(running, NPCM7xxPWM), + VMSTATE_BOOL(inverted, NPCM7xxPWM), + VMSTATE_UINT8(index, NPCM7xxPWM), + VMSTATE_UINT32(cnr, NPCM7xxPWM), + VMSTATE_UINT32(cmr, NPCM7xxPWM), + VMSTATE_UINT32(pdr, NPCM7xxPWM), + VMSTATE_UINT32(pwdr, NPCM7xxPWM), + VMSTATE_UINT32(freq, NPCM7xxPWM), + VMSTATE_UINT32(duty, NPCM7xxPWM), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_pwm_module = { + .name = "npcm7xx-pwm-module", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(clock, NPCM7xxPWMState), + VMSTATE_STRUCT_ARRAY(pwm, NPCM7xxPWMState, + NPCM7XX_PWM_PER_MODULE, 0, vmstate_npcm7xx_pwm, + NPCM7xxPWM), + VMSTATE_UINT32(ppr, NPCM7xxPWMState), + VMSTATE_UINT32(csr, NPCM7xxPWMState), + VMSTATE_UINT32(pcr, NPCM7xxPWMState), + VMSTATE_UINT32(pier, NPCM7xxPWMState), + VMSTATE_UINT32(piir, NPCM7xxPWMState), + VMSTATE_END_OF_LIST(), + }, +}; + +static void npcm7xx_pwm_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx PWM Controller"; + dc->vmsd = &vmstate_npcm7xx_pwm_module; + rc->phases.enter = npcm7xx_pwm_enter_reset; + rc->phases.hold = npcm7xx_pwm_hold_reset; +} + +static const TypeInfo npcm7xx_pwm_info = { + .name = TYPE_NPCM7XX_PWM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxPWMState), + .class_init = npcm7xx_pwm_class_init, + .instance_init = npcm7xx_pwm_init, +}; + +static void npcm7xx_pwm_register_type(void) +{ + type_register_static(&npcm7xx_pwm_info); +} +type_init(npcm7xx_pwm_register_type); diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c')) softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files( 'npcm7xx_clk.c', 'npcm7xx_gcr.c', + 'npcm7xx_pwm.c', 'npcm7xx_rng.c', )) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files( diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " valu npcm7xx_rng_read(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" npcm7xx_rng_write(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" +# npcm7xx_pwm.c +npcm7xx_pwm_read(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +npcm7xx_pwm_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +npcm7xx_pwm_update_freq(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Freq: old_freq: %u, new_freq: %u" +npcm7xx_pwm_update_duty(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Duty: old_duty: %u, new_duty: %u" + # stm32f4xx_syscfg.c stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d" stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d" -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> We add a qtest for the PWM in the previous patch. It proves it works as expected. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210108190945.949196-6-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_pwm-test.c | 490 +++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 491 insertions(+) create mode 100644 tests/qtest/npcm7xx_pwm-test.c diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx PWM Modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/bitops.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "qapi/qmp/qnum.h" + +#define REF_HZ 25000000 + +/* Register field definitions. */ +#define CH_EN BIT(0) +#define CH_INV BIT(2) +#define CH_MOD BIT(3) + +/* Registers shared between all PWMs in a module */ +#define PPR 0x00 +#define CSR 0x04 +#define PCR 0x08 +#define PIER 0x3c +#define PIIR 0x40 + +/* CLK module related */ +#define CLK_BA 0xf0801000 +#define CLKSEL 0x04 +#define CLKDIV1 0x08 +#define CLKDIV2 0x2c +#define PLLCON0 0x0c +#define PLLCON1 0x10 +#define PLL_INDV(rv) extract32((rv), 0, 6) +#define PLL_FBDV(rv) extract32((rv), 16, 12) +#define PLL_OTDV1(rv) extract32((rv), 8, 3) +#define PLL_OTDV2(rv) extract32((rv), 13, 3) +#define APB3CKDIV(rv) extract32((rv), 28, 2) +#define CLK2CKDIV(rv) extract32((rv), 0, 1) +#define CLK4CKDIV(rv) extract32((rv), 26, 2) +#define CPUCKSEL(rv) extract32((rv), 0, 2) + +#define MAX_DUTY 1000000 + +typedef struct PWMModule { + int irq; + uint64_t base_addr; +} PWMModule; + +typedef struct PWM { + uint32_t cnr_offset; + uint32_t cmr_offset; + uint32_t pdr_offset; + uint32_t pwdr_offset; +} PWM; + +typedef struct TestData { + const PWMModule *module; + const PWM *pwm; +} TestData; + +static const PWMModule pwm_module_list[] = { + { + .irq = 93, + .base_addr = 0xf0103000 + }, + { + .irq = 94, + .base_addr = 0xf0104000 + } +}; + +static const PWM pwm_list[] = { + { + .cnr_offset = 0x0c, + .cmr_offset = 0x10, + .pdr_offset = 0x14, + .pwdr_offset = 0x44, + }, + { + .cnr_offset = 0x18, + .cmr_offset = 0x1c, + .pdr_offset = 0x20, + .pwdr_offset = 0x48, + }, + { + .cnr_offset = 0x24, + .cmr_offset = 0x28, + .pdr_offset = 0x2c, + .pwdr_offset = 0x4c, + }, + { + .cnr_offset = 0x30, + .cmr_offset = 0x34, + .pdr_offset = 0x38, + .pwdr_offset = 0x50, + }, +}; + +static const int ppr_base[] = { 0, 0, 8, 8 }; +static const int csr_base[] = { 0, 4, 8, 12 }; +static const int pcr_base[] = { 0, 8, 12, 16 }; + +static const uint32_t ppr_list[] = { + 0, + 1, + 10, + 100, + 255, /* Max possible value. */ +}; + +static const uint32_t csr_list[] = { + 0, + 1, + 2, + 3, + 4, /* Max possible value. */ +}; + +static const uint32_t cnr_list[] = { + 0, + 1, + 50, + 100, + 150, + 200, + 1000, + 10000, + 65535, /* Max possible value. */ +}; + +static const uint32_t cmr_list[] = { + 0, + 1, + 10, + 50, + 100, + 150, + 200, + 1000, + 10000, + 65535, /* Max possible value. */ +}; + +/* Returns the index of the PWM module. */ +static int pwm_module_index(const PWMModule *module) +{ + ptrdiff_t diff = module - pwm_module_list; + + g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_module_list)); + + return diff; +} + +/* Returns the index of the PWM entry. */ +static int pwm_index(const PWM *pwm) +{ + ptrdiff_t diff = pwm - pwm_list; + + g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_list)); + + return diff; +} + +static uint64_t pwm_qom_get(QTestState *qts, const char *path, const char *name) +{ + QDict *response; + + g_test_message("Getting properties %s from %s", name, path); + response = qtest_qmp(qts, "{ 'execute': 'qom-get'," + " 'arguments': { 'path': %s, 'property': %s}}", + path, name); + /* The qom set message returns successfully. */ + g_assert_true(qdict_haskey(response, "return")); + return qnum_get_uint(qobject_to(QNum, qdict_get(response, "return"))); +} + +static uint64_t pwm_get_freq(QTestState *qts, int module_index, int pwm_index) +{ + char path[100]; + char name[100]; + + sprintf(path, "/machine/soc/pwm[%d]", module_index); + sprintf(name, "freq[%d]", pwm_index); + + return pwm_qom_get(qts, path, name); +} + +static uint64_t pwm_get_duty(QTestState *qts, int module_index, int pwm_index) +{ + char path[100]; + char name[100]; + + sprintf(path, "/machine/soc/pwm[%d]", module_index); + sprintf(name, "duty[%d]", pwm_index); + + return pwm_qom_get(qts, path, name); +} + +static uint32_t get_pll(uint32_t con) +{ + return REF_HZ * PLL_FBDV(con) / (PLL_INDV(con) * PLL_OTDV1(con) + * PLL_OTDV2(con)); +} + +static uint64_t read_pclk(QTestState *qts) +{ + uint64_t freq = REF_HZ; + uint32_t clksel = qtest_readl(qts, CLK_BA + CLKSEL); + uint32_t pllcon; + uint32_t clkdiv1 = qtest_readl(qts, CLK_BA + CLKDIV1); + uint32_t clkdiv2 = qtest_readl(qts, CLK_BA + CLKDIV2); + + switch (CPUCKSEL(clksel)) { + case 0: + pllcon = qtest_readl(qts, CLK_BA + PLLCON0); + freq = get_pll(pllcon); + break; + case 1: + pllcon = qtest_readl(qts, CLK_BA + PLLCON1); + freq = get_pll(pllcon); + break; + case 2: + break; + case 3: + break; + default: + g_assert_not_reached(); + } + + freq >>= (CLK2CKDIV(clkdiv1) + CLK4CKDIV(clkdiv1) + APB3CKDIV(clkdiv2)); + + return freq; +} + +static uint32_t pwm_selector(uint32_t csr) +{ + switch (csr) { + case 0: + return 2; + case 1: + return 4; + case 2: + return 8; + case 3: + return 16; + case 4: + return 1; + default: + g_assert_not_reached(); + } +} + +static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, + uint32_t cnr) +{ + return read_pclk(qts) / ((ppr + 1) * pwm_selector(csr) * (cnr + 1)); +} + +static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) +{ + uint64_t duty; + + if (cnr == 0) { + /* PWM is stopped. */ + duty = 0; + } else if (cmr >= cnr) { + duty = MAX_DUTY; + } else { + duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + } + + if (inverted) { + duty = MAX_DUTY - duty; + } + + return duty; +} + +static uint32_t pwm_read(QTestState *qts, const TestData *td, unsigned offset) +{ + return qtest_readl(qts, td->module->base_addr + offset); +} + +static void pwm_write(QTestState *qts, const TestData *td, unsigned offset, + uint32_t value) +{ + qtest_writel(qts, td->module->base_addr + offset, value); +} + +static uint32_t pwm_read_ppr(QTestState *qts, const TestData *td) +{ + return extract32(pwm_read(qts, td, PPR), ppr_base[pwm_index(td->pwm)], 8); +} + +static void pwm_write_ppr(QTestState *qts, const TestData *td, uint32_t value) +{ + pwm_write(qts, td, PPR, value << ppr_base[pwm_index(td->pwm)]); +} + +static uint32_t pwm_read_csr(QTestState *qts, const TestData *td) +{ + return extract32(pwm_read(qts, td, CSR), csr_base[pwm_index(td->pwm)], 3); +} + +static void pwm_write_csr(QTestState *qts, const TestData *td, uint32_t value) +{ + pwm_write(qts, td, CSR, value << csr_base[pwm_index(td->pwm)]); +} + +static uint32_t pwm_read_pcr(QTestState *qts, const TestData *td) +{ + return extract32(pwm_read(qts, td, PCR), pcr_base[pwm_index(td->pwm)], 4); +} + +static void pwm_write_pcr(QTestState *qts, const TestData *td, uint32_t value) +{ + pwm_write(qts, td, PCR, value << pcr_base[pwm_index(td->pwm)]); +} + +static uint32_t pwm_read_cnr(QTestState *qts, const TestData *td) +{ + return pwm_read(qts, td, td->pwm->cnr_offset); +} + +static void pwm_write_cnr(QTestState *qts, const TestData *td, uint32_t value) +{ + pwm_write(qts, td, td->pwm->cnr_offset, value); +} + +static uint32_t pwm_read_cmr(QTestState *qts, const TestData *td) +{ + return pwm_read(qts, td, td->pwm->cmr_offset); +} + +static void pwm_write_cmr(QTestState *qts, const TestData *td, uint32_t value) +{ + pwm_write(qts, td, td->pwm->cmr_offset, value); +} + +/* Check pwm registers can be reset to default value */ +static void test_init(gconstpointer test_data) +{ + const TestData *td = test_data; + QTestState *qts = qtest_init("-machine quanta-gsj"); + int module = pwm_module_index(td->module); + int pwm = pwm_index(td->pwm); + + g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0); + g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0); + + qtest_quit(qts); +} + +/* One-shot mode should not change frequency and duty cycle. */ +static void test_oneshot(gconstpointer test_data) +{ + const TestData *td = test_data; + QTestState *qts = qtest_init("-machine quanta-gsj"); + int module = pwm_module_index(td->module); + int pwm = pwm_index(td->pwm); + uint32_t ppr, csr, pcr; + int i, j; + + pcr = CH_EN; + for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) { + ppr = ppr_list[i]; + pwm_write_ppr(qts, td, ppr); + + for (j = 0; j < ARRAY_SIZE(csr_list); ++j) { + csr = csr_list[j]; + pwm_write_csr(qts, td, csr); + pwm_write_pcr(qts, td, pcr); + + g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr); + g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr); + g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr); + g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0); + g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0); + } + } + + qtest_quit(qts); +} + +/* In toggle mode, the PWM generates correct outputs. */ +static void test_toggle(gconstpointer test_data) +{ + const TestData *td = test_data; + QTestState *qts = qtest_init("-machine quanta-gsj"); + int module = pwm_module_index(td->module); + int pwm = pwm_index(td->pwm); + uint32_t ppr, csr, pcr, cnr, cmr; + int i, j, k, l; + uint64_t expected_freq, expected_duty; + + pcr = CH_EN | CH_MOD; + for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) { + ppr = ppr_list[i]; + pwm_write_ppr(qts, td, ppr); + + for (j = 0; j < ARRAY_SIZE(csr_list); ++j) { + csr = csr_list[j]; + pwm_write_csr(qts, td, csr); + + for (k = 0; k < ARRAY_SIZE(cnr_list); ++k) { + cnr = cnr_list[k]; + pwm_write_cnr(qts, td, cnr); + + for (l = 0; l < ARRAY_SIZE(cmr_list); ++l) { + cmr = cmr_list[l]; + pwm_write_cmr(qts, td, cmr); + expected_freq = pwm_compute_freq(qts, ppr, csr, cnr); + expected_duty = pwm_compute_duty(cnr, cmr, false); + + pwm_write_pcr(qts, td, pcr); + g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr); + g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr); + g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr); + g_assert_cmpuint(pwm_read_cnr(qts, td), ==, cnr); + g_assert_cmpuint(pwm_read_cmr(qts, td), ==, cmr); + g_assert_cmpuint(pwm_get_duty(qts, module, pwm), + ==, expected_duty); + if (expected_duty != 0 && expected_duty != 100) { + /* Duty cycle with 0 or 100 doesn't need frequency. */ + g_assert_cmpuint(pwm_get_freq(qts, module, pwm), + ==, expected_freq); + } + + /* Test inverted mode */ + expected_duty = pwm_compute_duty(cnr, cmr, true); + pwm_write_pcr(qts, td, pcr | CH_INV); + g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr | CH_INV); + g_assert_cmpuint(pwm_get_duty(qts, module, pwm), + ==, expected_duty); + if (expected_duty != 0 && expected_duty != 100) { + /* Duty cycle with 0 or 100 doesn't need frequency. */ + g_assert_cmpuint(pwm_get_freq(qts, module, pwm), + ==, expected_freq); + } + + } + } + } + } + + qtest_quit(qts); +} + +static void pwm_add_test(const char *name, const TestData* td, + GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf( + "npcm7xx_pwm/module[%d]/pwm[%d]/%s", pwm_module_index(td->module), + pwm_index(td->pwm), name); + qtest_add_data_func(full_name, td, fn); +} +#define add_test(name, td) pwm_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + TestData test_data_list[ARRAY_SIZE(pwm_module_list) * ARRAY_SIZE(pwm_list)]; + + g_test_init(&argc, &argv, NULL); + + for (int i = 0; i < ARRAY_SIZE(pwm_module_list); ++i) { + for (int j = 0; j < ARRAY_SIZE(pwm_list); ++j) { + TestData *td = &test_data_list[i * ARRAY_SIZE(pwm_list) + j]; + + td->module = &pwm_module_list[i]; + td->pwm = &pwm_list[j]; + + add_test(init, td); + add_test(oneshot, td); + add_test(toggle, td); + } + } + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ qtests_npcm7xx = \ ['npcm7xx_adc-test', 'npcm7xx_gpio-test', + 'npcm7xx_pwm-test', 'npcm7xx_rng-test', 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> A device shouldn't access its parent object which is QOM internal. Instead it should use type cast for this purporse. This patch fixes this issue for all NPCM7XX Devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210108190945.949196-7-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/npcm7xx_boards.c | 2 +- hw/mem/npcm7xx_mc.c | 2 +- hw/misc/npcm7xx_clk.c | 2 +- hw/misc/npcm7xx_gcr.c | 2 +- hw/misc/npcm7xx_rng.c | 2 +- hw/nvram/npcm7xx_otp.c | 2 +- hw/ssi/npcm7xx_fiu.c | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ static NPCM7xxState *npcm7xx_create_soc(MachineState *machine, uint32_t hw_straps) { NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_GET_CLASS(machine); - MachineClass *mc = &nmc->parent; + MachineClass *mc = MACHINE_CLASS(nmc); Object *obj; if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { diff --git a/hw/mem/npcm7xx_mc.c b/hw/mem/npcm7xx_mc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/mem/npcm7xx_mc.c +++ b/hw/mem/npcm7xx_mc.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_mc_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->mmio, OBJECT(s), &npcm7xx_mc_ops, s, "regs", NPCM7XX_MC_REGS_SIZE); - sysbus_init_mmio(&s->parent, &s->mmio); + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->mmio); } static void npcm7xx_mc_class_init(ObjectClass *klass, void *data) diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj) memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s, TYPE_NPCM7XX_CLK, 4 * KiB); - sysbus_init_mmio(&s->parent, &s->iomem); + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); } static int npcm7xx_clk_post_load(void *opaque, int version_id) diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_gcr.c +++ b/hw/misc/npcm7xx_gcr.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_init(Object *obj) memory_region_init_io(&s->iomem, obj, &npcm7xx_gcr_ops, s, TYPE_NPCM7XX_GCR, 4 * KiB); - sysbus_init_mmio(&s->parent, &s->iomem); + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); } static const VMStateDescription vmstate_npcm7xx_gcr = { diff --git a/hw/misc/npcm7xx_rng.c b/hw/misc/npcm7xx_rng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_rng.c +++ b/hw/misc/npcm7xx_rng.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_rng_init(Object *obj) memory_region_init_io(&s->iomem, obj, &npcm7xx_rng_ops, s, "regs", NPCM7XX_RNG_REGS_SIZE); - sysbus_init_mmio(&s->parent, &s->iomem); + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); } static const VMStateDescription vmstate_npcm7xx_rng = { diff --git a/hw/nvram/npcm7xx_otp.c b/hw/nvram/npcm7xx_otp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/npcm7xx_otp.c +++ b/hw/nvram/npcm7xx_otp.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_otp_realize(DeviceState *dev, Error **errp) { NPCM7xxOTPClass *oc = NPCM7XX_OTP_GET_CLASS(dev); NPCM7xxOTPState *s = NPCM7XX_OTP(dev); - SysBusDevice *sbd = &s->parent; + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); memset(s->array, 0, sizeof(s->array)); diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/npcm7xx_fiu.c +++ b/hw/ssi/npcm7xx_fiu.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_hold_reset(Object *obj) static void npcm7xx_fiu_realize(DeviceState *dev, Error **errp) { NPCM7xxFIUState *s = NPCM7XX_FIU(dev); - SysBusDevice *sbd = &s->parent; + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); int i; if (s->cs_count <= 0) { -- 2.20.1 From: Roman Bolshakov <r.bolshakov@yadro.com> ui/cocoa.m:1188:44: warning: 'openFile:' is deprecated: first deprecated in macOS 11.0 - Use -[NSWorkspace openURL:] instead. [-Wdeprecated-declarations] if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) { ^ /Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSWorkspace.h:350:1: note: 'openFile:' has been explicitly marked deprecated here - (BOOL)openFile:(NSString *)fullPath API_DEPRECATED("Use -[NSWorkspace openURL:] instead.", macos(10.0, 11.0)); ^ Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210102150718.47618-1-r.bolshakov@yadro.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- ui/cocoa.m | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/ui/cocoa.m b/ui/cocoa.m index XXXXXXX..XXXXXXX 100644 --- a/ui/cocoa.m +++ b/ui/cocoa.m @@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView; /* Where to look for local files */ NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"}; NSString *full_file_path; + NSURL *full_file_url; /* iterate thru the possible paths until the file is found */ int index; @@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView; full_file_path = [full_file_path stringByDeletingLastPathComponent]; full_file_path = [NSString stringWithFormat: @"%@/%@%@", full_file_path, path_array[index], filename]; - if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) { + full_file_url = [NSURL fileURLWithPath: full_file_path + isDirectory: false]; + if ([[NSWorkspace sharedWorkspace] openURL: full_file_url] == YES) { return; } } -- 2.20.1