The netduino2 and netduinoplus2 boards forgot to set the system_clock_scale

global, which meant that if guest code used the systick timer in "use

the processor clock" mode it would hang because time never advances.

Set the global to match the documented CPU clock speed of these boards.

Judging by the data sheet this is slightly simplistic because the

SoC allows configuration of the SYSCLK source and frequency via the

RCC (reset and clock control) module, but we don't model that.

Fixes: https://bugs.launchpad.net/qemu/+bug/1876187

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Message-id: 20200727162617.26227-1-peter.maydell@linaro.org

---

hw/arm/netduino2.c | 10 ++++++++++

hw/arm/netduinoplus2.c | 10 ++++++++++

2 files changed, 20 insertions(+)

diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c

index XXXXXXX..XXXXXXX 100644

--- a/hw/arm/netduino2.c

+++ b/hw/arm/netduino2.c

@@ -XXX,XX +XXX,XX @@

#include "hw/arm/stm32f205_soc.h"

#include "hw/arm/boot.h"

+/* Main SYSCLK frequency in Hz (120MHz) */

+#define SYSCLK_FRQ 120000000ULL

+

static void netduino2_init(MachineState *machine)

{

DeviceState *dev;

+ /*

+ * TODO: ideally we would model the SoC RCC and let it handle

+ * system_clock_scale, including its ability to define different

+ * possible SYSCLK sources.

+ */

+ system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;

+

dev = qdev_new(TYPE_STM32F205_SOC);

qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m3"));

sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);

diff --git a/hw/arm/netduinoplus2.c b/hw/arm/netduinoplus2.c

index XXXXXXX..XXXXXXX 100644

--- a/hw/arm/netduinoplus2.c

+++ b/hw/arm/netduinoplus2.c

@@ -XXX,XX +XXX,XX @@

#include "hw/arm/stm32f405_soc.h"

#include "hw/arm/boot.h"

+/* Main SYSCLK frequency in Hz (168MHz) */

+#define SYSCLK_FRQ 168000000ULL

+

static void netduinoplus2_init(MachineState *machine)

{

DeviceState *dev;

+ /*

+ * TODO: ideally we would model the SoC RCC and let it handle

+ * system_clock_scale, including its ability to define different

+ * possible SYSCLK sources.

+ */

+ system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;

+

dev = qdev_new(TYPE_STM32F405_SOC);

qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m4"));

sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);

--

2.20.1

Mostly devices don't need to care whether one of their output

qemu_irq lines is connected, because functions like qemu_set_irq()

silently do nothing if there is nothing on the other end. However

sometimes a device might want to implement default behaviour for the

case where the machine hasn't wired the line up to anywhere.

Provide a function qemu_irq_is_connected() that devices can use for

this purpose. (The test is trivial but encapsulating it in a

function makes it easier to see where we're doing it in case we need

to change the implementation later.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Message-id: 20200728103744.6909-2-peter.maydell@linaro.org

---

include/hw/irq.h | 18 ++++++++++++++++++

1 file changed, 18 insertions(+)

diff --git a/include/hw/irq.h b/include/hw/irq.h

index XXXXXXX..XXXXXXX 100644

--- a/include/hw/irq.h

+++ b/include/hw/irq.h

@@ -XXX,XX +XXX,XX @@ qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2);

on an existing vector of qemu_irq. */

void qemu_irq_intercept_in(qemu_irq *gpio_in, qemu_irq_handler handler, int n);

+/**

+ * qemu_irq_is_connected: Return true if IRQ line is wired up

+ *

+ * If a qemu_irq has a device on the other (receiving) end of it,

+ * return true; otherwise return false.

+ *

+ * Usually device models don't need to care whether the machine model

+ * has wired up their outbound qemu_irq lines, because functions like

+ * qemu_set_irq() silently do nothing if there is nothing on the other

+ * end of the line. However occasionally a device model will want to

+ * provide default behaviour if its output is left floating, and

+ * it can use this function to identify when that is the case.

+ */

+static inline bool qemu_irq_is_connected(qemu_irq irq)

+{

+ return irq != NULL;

+}

+

#endif

--

2.20.1

The NVIC provides an outbound qemu_irq "SYSRESETREQ" which it signals

when the guest sets the SYSRESETREQ bit in the AIRCR register. This

matches the hardware design (where the CPU has a signal of this name

and it is up to the SoC to connect that up to an actual reset

mechanism), but in QEMU it mostly results in duplicated code in SoC

objects and bugs where SoC model implementors forget to wire up the

SYSRESETREQ line.

Provide a default behaviour for the case where SYSRESETREQ is not

actually connected to anything: use qemu_system_reset_request() to

perform a system reset. This will allow us to remove the

implementations of SYSRESETREQ handling from the boards where that's

exactly what it does, and also fixes the bugs in the board models

which forgot to wire up the signal:

* microbit

* mps2-an385

* mps2-an505

* mps2-an511

* mps2-an521

* musca-a

* musca-b1

* netduino

* netduinoplus2

We still allow the board to wire up the signal if it needs to, in case

we need to model more complicated reset controller logic or to model

buggy SoC hardware which forgot to wire up the line itself. But

defaulting to "reset the system" is more often going to be correct

than defaulting to "do nothing".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Message-id: 20200728103744.6909-3-peter.maydell@linaro.org

---

include/hw/arm/armv7m.h | 4 +++-

hw/intc/armv7m_nvic.c | 17 ++++++++++++++++-

2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h

index XXXXXXX..XXXXXXX 100644

--- a/include/hw/arm/armv7m.h

+++ b/include/hw/arm/armv7m.h

@@ -XXX,XX +XXX,XX @@ typedef struct {

/* ARMv7M container object.

* + Unnamed GPIO input lines: external IRQ lines for the NVIC

- * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ

+ * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ.

+ * If this GPIO is not wired up then the NVIC will default to performing

+ * a qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET).

* + Property "cpu-type": CPU type to instantiate

* + Property "num-irq": number of external IRQ lines

* + Property "memory": MemoryRegion defining the physical address space

diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c

index XXXXXXX..XXXXXXX 100644

--- a/hw/intc/armv7m_nvic.c

+++ b/hw/intc/armv7m_nvic.c

@@ -XXX,XX +XXX,XX @@

#include "hw/intc/armv7m_nvic.h"

#include "hw/irq.h"

#include "hw/qdev-properties.h"

+#include "sysemu/runstate.h"

#include "target/arm/cpu.h"

#include "exec/exec-all.h"

#include "exec/memop.h"

@@ -XXX,XX +XXX,XX @@ static const uint8_t nvic_id[] = {

0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1

};

+static void signal_sysresetreq(NVICState *s)

+{

+ if (qemu_irq_is_connected(s->sysresetreq)) {

+ qemu_irq_pulse(s->sysresetreq);

+ } else {

+ /*

+ * Default behaviour if the SoC doesn't need to wire up

+ * SYSRESETREQ (eg to a system reset controller of some kind):

+ * perform a system reset via the usual QEMU API.

+ */

+ qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);

+ }

+}

+

static int nvic_pending_prio(NVICState *s)

{

/* return the group priority of the current pending interrupt,

@@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value,

if (value & R_V7M_AIRCR_SYSRESETREQ_MASK) {

if (attrs.secure ||

!(cpu->env.v7m.aircr & R_V7M_AIRCR_SYSRESETREQS_MASK)) {

- qemu_irq_pulse(s->sysresetreq);

+ signal_sysresetreq(s);

}

}

if (value & R_V7M_AIRCR_VECTCLRACTIVE_MASK) {

--

2.20.1

The MSF2 SoC model and the Stellaris board code both wire

SYSRESETREQ up to a function that just invokes

qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);

This is now the default action that the NVIC does if the line is

not connected, so we can delete the handling code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Message-id: 20200728103744.6909-4-peter.maydell@linaro.org

---

hw/arm/msf2-soc.c | 11 -----------

hw/arm/stellaris.c | 12 ------------

2 files changed, 23 deletions(-)

diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c

index XXXXXXX..XXXXXXX 100644

--- a/hw/arm/msf2-soc.c

+++ b/hw/arm/msf2-soc.c

@@ -XXX,XX +XXX,XX @@

#include "hw/irq.h"

#include "hw/arm/msf2-soc.h"

#include "hw/misc/unimp.h"

-#include "sysemu/runstate.h"

#include "sysemu/sysemu.h"

#define MSF2_TIMER_BASE 0x40004000

@@ -XXX,XX +XXX,XX @@ static const int spi_irq[MSF2_NUM_SPIS] = { 2, 3 };

static const int uart_irq[MSF2_NUM_UARTS] = { 10, 11 };

static const int timer_irq[MSF2_NUM_TIMERS] = { 14, 15 };

-static void do_sys_reset(void *opaque, int n, int level)

-{

- if (level) {

- qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);

- }

-}

-

static void m2sxxx_soc_initfn(Object *obj)

{

MSF2State *s = MSF2_SOC(obj);

@@ -XXX,XX +XXX,XX @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)

return;

}

- qdev_connect_gpio_out_named(DEVICE(&s->armv7m.nvic), "SYSRESETREQ", 0,

- qemu_allocate_irq(&do_sys_reset, NULL, 0));

-

system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk;

for (i = 0; i < MSF2_NUM_UARTS; i++) {

diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c

index XXXXXXX..XXXXXXX 100644

--- a/hw/arm/stellaris.c

+++ b/hw/arm/stellaris.c

@@ -XXX,XX +XXX,XX @@

#include "hw/boards.h"

#include "qemu/log.h"

#include "exec/address-spaces.h"

-#include "sysemu/runstate.h"

#include "sysemu/sysemu.h"

#include "hw/arm/armv7m.h"

#include "hw/char/pl011.h"

@@ -XXX,XX +XXX,XX @@ static void stellaris_adc_init(Object *obj)

qdev_init_gpio_in(dev, stellaris_adc_trigger, 1);

}

-static

-void do_sys_reset(void *opaque, int n, int level)

-{

- if (level) {

- qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);

- }

-}

-

/* Board init. */

static stellaris_board_info stellaris_boards[] = {

{ "LM3S811EVB",

@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)

/* This will exit with an error if the user passed us a bad cpu_type */

sysbus_realize_and_unref(SYS_BUS_DEVICE(nvic), &error_fatal);

- qdev_connect_gpio_out_named(nvic, "SYSRESETREQ", 0,

- qemu_allocate_irq(&do_sys_reset, NULL, 0));

-

if (board->dc1 & (1 << 16)) {

dev = sysbus_create_varargs(TYPE_STELLARIS_ADC, 0x40038000,

qdev_get_gpio_in(nvic, 14),

--

2.20.1

From: Kaige Li <likaige@loongson.cn>

GCC version 4.9.4 isn't clever enough to figure out that all

execution paths in disas_ldst() that use 'fn' will have initialized

it first, and so it warns:

/home/LiKaige/qemu/target/arm/translate-a64.c: In function ‘disas_ldst’:

/home/LiKaige/qemu/target/arm/translate-a64.c:3392:5: error: ‘fn’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

fn(cpu_reg(s, rt), clean_addr, tcg_rs, get_mem_index(s),

^

/home/LiKaige/qemu/target/arm/translate-a64.c:3318:22: note: ‘fn’ was declared here

AtomicThreeOpFn *fn;

^

Make it happy by initializing the variable to NULL.

Signed-off-by: Kaige Li <likaige@loongson.cn>

Message-id: 1596110248-7366-2-git-send-email-likaige@loongson.cn

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

[PMM: Clean up commit message and note which gcc version this was]

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

---

target/arm/translate-a64.c | 2 +-

1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c

index XXXXXXX..XXXXXXX 100644

--- a/target/arm/translate-a64.c

+++ b/target/arm/translate-a64.c

@@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn,

bool r = extract32(insn, 22, 1);

bool a = extract32(insn, 23, 1);

TCGv_i64 tcg_rs, clean_addr;

- AtomicThreeOpFn *fn;

+ AtomicThreeOpFn *fn = NULL;

if (is_vector || !dc_isar_feature(aa64_atomics, s)) {

unallocated_encoding(s);

--

2.20.1

The imx_epit device has a software-controllable reset triggered by

setting the SWR bit in the CR register. An error in commit cc2722ec83ad9

means that we will end up assert()ing if the guest does this, because

the code in imx_epit_write() starts ptimer transactions, and then

imx_epit_reset() also starts ptimer transactions, triggering

"ptimer_transaction_begin: Assertion `!s->in_transaction' failed".

The cleanest way to avoid this double-transaction is to move the

start-transaction for the CR write handling down below the check of

the SWR bit.

Fixes: https://bugs.launchpad.net/qemu/+bug/1880424

Fixes: cc2722ec83ad944505fe

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Message-id: 20200727154550.3409-1-peter.maydell@linaro.org

---

hw/timer/imx_epit.c | 13 ++++++++++---

1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c

index XXXXXXX..XXXXXXX 100644

--- a/hw/timer/imx_epit.c

+++ b/hw/timer/imx_epit.c

@@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,

switch (offset >> 2) {

case 0: /* CR */

- ptimer_transaction_begin(s->timer_cmp);

- ptimer_transaction_begin(s->timer_reload);

oldcr = s->cr;

s->cr = value & 0x03ffffff;

if (s->cr & CR_SWR) {

/* handle the reset */

imx_epit_reset(DEVICE(s));

- } else {

+ /*

+ * TODO: could we 'break' here? following operations appear

+ * to duplicate the work imx_epit_reset() already did.

+ */

+ }

+

+ ptimer_transaction_begin(s->timer_cmp);

+ ptimer_transaction_begin(s->timer_reload);

+

+ if (!(s->cr & CR_SWR)) {

imx_epit_set_freq(s);

}

--

2.20.1