The hppa_hardware.h file is shared with SeaBIOS. Sync it.
Signed-off-by: Helge Deller <deller@gmx.de>
---
hw/hppa/hppa_hardware.h | 6 ++++++
hw/hppa/lasi.c | 2 --
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/hw/hppa/hppa_hardware.h b/hw/hppa/hppa_hardware.h
index 4a2fe2df60..cdb7fa6240 100644
--- a/hw/hppa/hppa_hardware.h
+++ b/hw/hppa/hppa_hardware.h
@@ -17,6 +17,7 @@
#define LASI_UART_HPA 0xffd05000
#define LASI_SCSI_HPA 0xffd06000
#define LASI_LAN_HPA 0xffd07000
+#define LASI_RTC_HPA 0xffd09000
#define LASI_LPT_HPA 0xffd02000
#define LASI_AUDIO_HPA 0xffd04000
#define LASI_PS2KBD_HPA 0xffd08000
@@ -37,10 +38,15 @@
#define PORT_PCI_CMD (PCI_HPA + DINO_PCI_ADDR)
#define PORT_PCI_DATA (PCI_HPA + DINO_CONFIG_DATA)
+/* QEMU fw_cfg interface port */
+#define QEMU_FW_CFG_IO_BASE (MEMORY_HPA + 0x80)
+
#define PORT_SERIAL1 (DINO_UART_HPA + 0x800)
#define PORT_SERIAL2 (LASI_UART_HPA + 0x800)
#define HPPA_MAX_CPUS 8 /* max. number of SMP CPUs */
#define CPU_CLOCK_MHZ 250 /* emulate a 250 MHz CPU */
+#define CPU_HPA_CR_REG 7 /* store CPU HPA in cr7 (SeaBIOS internal) */
+
#endif
diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 19974034f3..ffcbb988b8 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -54,8 +54,6 @@
#define LASI_CHIP(obj) \
OBJECT_CHECK(LasiState, (obj), TYPE_LASI_CHIP)
-#define LASI_RTC_HPA (LASI_HPA + 0x9000)
-
typedef struct LasiState {
PCIHostState parent_obj;
--
2.21.3
On 7/27/20 11:46 PM, Helge Deller wrote:
> The hppa_hardware.h file is shared with SeaBIOS. Sync it.
>
> Signed-off-by: Helge Deller <deller@gmx.de>
> ---
> hw/hppa/hppa_hardware.h | 6 ++++++
> hw/hppa/lasi.c | 2 --
> 2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/hw/hppa/hppa_hardware.h b/hw/hppa/hppa_hardware.h
> index 4a2fe2df60..cdb7fa6240 100644
> --- a/hw/hppa/hppa_hardware.h
> +++ b/hw/hppa/hppa_hardware.h
> @@ -17,6 +17,7 @@
> #define LASI_UART_HPA 0xffd05000
> #define LASI_SCSI_HPA 0xffd06000
> #define LASI_LAN_HPA 0xffd07000
> +#define LASI_RTC_HPA 0xffd09000
I find the line you are removing cleaner:
-#define LASI_RTC_HPA (LASI_HPA + 0x9000)
"Offset in the LASI memory region".
Anyway not a blocker.
Having these values sorted would help.
> #define LASI_LPT_HPA 0xffd02000
> #define LASI_AUDIO_HPA 0xffd04000
> #define LASI_PS2KBD_HPA 0xffd08000
> @@ -37,10 +38,15 @@
> #define PORT_PCI_CMD (PCI_HPA + DINO_PCI_ADDR)
> #define PORT_PCI_DATA (PCI_HPA + DINO_CONFIG_DATA)
>
> +/* QEMU fw_cfg interface port */
> +#define QEMU_FW_CFG_IO_BASE (MEMORY_HPA + 0x80)
> +
> #define PORT_SERIAL1 (DINO_UART_HPA + 0x800)
> #define PORT_SERIAL2 (LASI_UART_HPA + 0x800)
>
> #define HPPA_MAX_CPUS 8 /* max. number of SMP CPUs */
> #define CPU_CLOCK_MHZ 250 /* emulate a 250 MHz CPU */
>
> +#define CPU_HPA_CR_REG 7 /* store CPU HPA in cr7 (SeaBIOS internal) */
> +
> #endif
> diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
> index 19974034f3..ffcbb988b8 100644
> --- a/hw/hppa/lasi.c
> +++ b/hw/hppa/lasi.c
> @@ -54,8 +54,6 @@
> #define LASI_CHIP(obj) \
> OBJECT_CHECK(LasiState, (obj), TYPE_LASI_CHIP)
>
> -#define LASI_RTC_HPA (LASI_HPA + 0x9000)
> -
> typedef struct LasiState {
> PCIHostState parent_obj;
>
> --
> 2.21.3
>
>
On 29.07.20 20:21, Philippe Mathieu-Daudé wrote:
> On 7/27/20 11:46 PM, Helge Deller wrote:
>> The hppa_hardware.h file is shared with SeaBIOS. Sync it.
>>
>> Signed-off-by: Helge Deller <deller@gmx.de>
>> ---
>> hw/hppa/hppa_hardware.h | 6 ++++++
>> hw/hppa/lasi.c | 2 --
>> 2 files changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/hw/hppa/hppa_hardware.h b/hw/hppa/hppa_hardware.h
>> index 4a2fe2df60..cdb7fa6240 100644
>> --- a/hw/hppa/hppa_hardware.h
>> +++ b/hw/hppa/hppa_hardware.h
>> @@ -17,6 +17,7 @@
>> #define LASI_UART_HPA 0xffd05000
>> #define LASI_SCSI_HPA 0xffd06000
>> #define LASI_LAN_HPA 0xffd07000
>> +#define LASI_RTC_HPA 0xffd09000
>
> I find the line you are removing cleaner:
> -#define LASI_RTC_HPA (LASI_HPA + 0x9000)
Yes, but at least temporarily it should be consistent inside
the header file.
> "Offset in the LASI memory region".
>
> Anyway not a blocker.
Ok, thanks!
Helge
> Having these values sorted would help.
>
>> #define LASI_LPT_HPA 0xffd02000
>> #define LASI_AUDIO_HPA 0xffd04000
>> #define LASI_PS2KBD_HPA 0xffd08000
>> @@ -37,10 +38,15 @@
>> #define PORT_PCI_CMD (PCI_HPA + DINO_PCI_ADDR)
>> #define PORT_PCI_DATA (PCI_HPA + DINO_CONFIG_DATA)
>>
>> +/* QEMU fw_cfg interface port */
>> +#define QEMU_FW_CFG_IO_BASE (MEMORY_HPA + 0x80)
>> +
>> #define PORT_SERIAL1 (DINO_UART_HPA + 0x800)
>> #define PORT_SERIAL2 (LASI_UART_HPA + 0x800)
>>
>> #define HPPA_MAX_CPUS 8 /* max. number of SMP CPUs */
>> #define CPU_CLOCK_MHZ 250 /* emulate a 250 MHz CPU */
>>
>> +#define CPU_HPA_CR_REG 7 /* store CPU HPA in cr7 (SeaBIOS internal) */
>> +
>> #endif
>> diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
>> index 19974034f3..ffcbb988b8 100644
>> --- a/hw/hppa/lasi.c
>> +++ b/hw/hppa/lasi.c
>> @@ -54,8 +54,6 @@
>> #define LASI_CHIP(obj) \
>> OBJECT_CHECK(LasiState, (obj), TYPE_LASI_CHIP)
>>
>> -#define LASI_RTC_HPA (LASI_HPA + 0x9000)
>> -
>> typedef struct LasiState {
>> PCIHostState parent_obj;
>>
>> --
>> 2.21.3
>>
>>
>
On 7/27/20 2:46 PM, Helge Deller wrote: > The hppa_hardware.h file is shared with SeaBIOS. Sync it. > > Signed-off-by: Helge Deller <deller@gmx.de> > --- > hw/hppa/hppa_hardware.h | 6 ++++++ > hw/hppa/lasi.c | 2 -- > 2 files changed, 6 insertions(+), 2 deletions(-) Acked-by: Richard Henderson <richard.henderson@linaro.org> r~
© 2016 - 2026 Red Hat, Inc.