Last lot of target-arm changes to squeeze in before rc1: * various minor Arm bug fixes * David Carlier's Haiku build portability fixes * Wentong Wu's fixes for icount handling in the nios2 target The following changes since commit 00ce6c36b35e0eb8cc5d68a28f288a6335848813: Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-07-13' into staging (2020-07-13 13:01:30 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200713 for you to fetch changes up to 756f739b1682bf131994ec96dad7fbdf8b54493a: hw/arm/aspeed: Do not create and attach empty SD cards by default (2020-07-13 14:36:12 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm/bcm2836: Remove unused 'cpu_type' field * target/arm: Fix mtedesc for do_mem_zpz * Add the ability to change the FEC PHY MDIO device number on i.MX25/i.MX6/i.MX7 * target/arm: Don't do raw writes for PMINTENCLR * virtio-iommu: Fix coverity issue in virtio_iommu_handle_command() * build: Fix various issues with building on Haiku * target/nios2: fix wrctl behaviour when using icount * hw/arm/tosa: Encapsulate misc GPIO handling in a device * hw/arm/palm.c: Encapsulate misc GPIO handling in a device * hw/arm/aspeed: Do not create and attach empty SD cards by default ---------------------------------------------------------------- Aaron Lindsay (1): target/arm: Don't do raw writes for PMINTENCLR David CARLIER (8): build: Enable BSD symbols for Haiku util/qemu-openpty.c: Don't assume pty.h is glibc-only build: Check that mlockall() exists osdep.h: Always include <sys/signal.h> if it exists osdep.h: For Haiku, define SIGIO as equivalent to SIGPOLL bswap.h: Include <endian.h> on Haiku for bswap operations util/compatfd.c: Only include <sys/syscall.h> if CONFIG_SIGNALFD util/oslib-posix.c: Implement qemu_init_exec_dir() for Haiku Eric Auger (1): virtio-iommu: Fix coverity issue in virtio_iommu_handle_command() Gerd Hoffmann (1): util/drm: make portable by avoiding struct dirent d_type Jean-Christophe Dubois (3): Add the ability to change the FEC PHY MDIO device number on i.MX25 processor Add the ability to change the FEC PHY MDIO device number on i.MX6 processor Add the ability to change the FEC PHY MDIO devices numbers on i.MX7 processor Peter Maydell (4): hw/arm/tosa.c: Detabify hw/arm/tosa: Encapsulate misc GPIO handling in a device hw/arm/palm.c: Detabify hw/arm/palm.c: Encapsulate misc GPIO handling in a device Philippe Mathieu-Daudé (2): hw/arm/bcm2836: Remove unused 'cpu_type' field hw/arm/aspeed: Do not create and attach empty SD cards by default Richard Henderson (1): target/arm: Fix mtedesc for do_mem_zpz Wentong Wu (4): target/nios2: add DISAS_NORETURN case for nothing more to generate target/nios2: in line the semantics of DISAS_UPDATE with other targets target/nios2: Use gen_io_start around wrctl instruction hw/nios2: exit to main CPU loop only when unmasking interrupts configure | 38 ++++++++++++- include/hw/arm/bcm2836.h | 1 - include/hw/arm/fsl-imx25.h | 1 + include/hw/arm/fsl-imx6.h | 1 + include/hw/arm/fsl-imx7.h | 1 + include/qemu/bswap.h | 2 + include/qemu/osdep.h | 6 +- hw/arm/aspeed.c | 9 +-- hw/arm/fsl-imx25.c | 7 +++ hw/arm/fsl-imx6.c | 7 +++ hw/arm/fsl-imx7.c | 9 +++ hw/arm/palm.c | 111 +++++++++++++++++++++++++------------ hw/arm/tosa.c | 132 +++++++++++++++++++++++++++++--------------- hw/nios2/cpu_pic.c | 3 +- hw/virtio/virtio-iommu.c | 1 + hw/xen/xen-legacy-backend.c | 1 - os-posix.c | 4 ++ target/arm/helper.c | 4 +- target/arm/translate-sve.c | 2 +- target/nios2/translate.c | 12 +++- util/compatfd.c | 2 + util/drm.c | 19 +++++-- util/oslib-posix.c | 20 ++++++- util/qemu-openpty.c | 2 +- 24 files changed, 292 insertions(+), 103 deletions(-) From: Philippe Mathieu-Daudé <f4bug@amsat.org> The 'cpu_type' has been moved from BCM283XState to BCM283XClass in commit 210f47840d, but we forgot to remove the old variable. Do it now. Fixes: 210f47840d ("hw/arm/bcm2836: Hardcode correct CPU type") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200703200459.23294-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2836.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XState { DeviceState parent_obj; /*< public >*/ - char *cpu_type; uint32_t enabled_cpus; struct { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The mtedesc that was constructed was not actually passed in. Found by Coverity (CID 1429996). Fixes: d28d12f008e Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200706202345.193676-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, desc = FIELD_DP32(desc, MTEDESC, ESIZE, 1 << msz); desc <<= SVE_MTEDESC_SHIFT; } - desc = simd_desc(vsz, vsz, scale); + desc = simd_desc(vsz, vsz, desc | scale); t_desc = tcg_const_i32(desc); tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, pg)); -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 9f8923ecd974160ae8f634c275b1100c2cbe66d7.1593806826.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: updated for object_property_set_uint() argument reordering] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx25.h | 1 + hw/arm/fsl-imx25.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { MemoryRegion rom[2]; MemoryRegion iram; MemoryRegion iram_alias; + uint32_t phy_num; } FslIMX25State; /** diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx25.c +++ b/hw/arm/fsl-imx25.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) epit_table[i].irq)); } + object_property_set_uint(OBJECT(&s->fec), "phy-num", s->phy_num, &err); qdev_set_nic_properties(DEVICE(&s->fec), &nd_table[0]); if (!sysbus_realize(SYS_BUS_DEVICE(&s->fec), errp)) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) &s->iram_alias); } +static Property fsl_imx25_properties[] = { + DEFINE_PROP_UINT32("fec-phy-num", FslIMX25State, phy_num, 0), + DEFINE_PROP_END_OF_LIST(), +}; + static void fsl_imx25_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx25_properties); dc->realize = fsl_imx25_realize; dc->desc = "i.MX25 SOC"; /* -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 05a64e83eb1c0c865ac077b22c599425c024c02c.1593806826.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: updated for object_property_set_uint() argument reordering] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6.h | 1 + hw/arm/fsl-imx6.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6.h +++ b/include/hw/arm/fsl-imx6.h @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX6State { MemoryRegion caam; MemoryRegion ocram; MemoryRegion ocram_alias; + uint32_t phy_num; } FslIMX6State; diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6.c +++ b/hw/arm/fsl-imx6.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp) spi_table[i].irq)); } + object_property_set_uint(OBJECT(&s->eth), "phy-num", s->phy_num, &err); qdev_set_nic_properties(DEVICE(&s->eth), &nd_table[0]); if (!sysbus_realize(SYS_BUS_DEVICE(&s->eth), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp) &s->ocram_alias); } +static Property fsl_imx6_properties[] = { + DEFINE_PROP_UINT32("fec-phy-num", FslIMX6State, phy_num, 0), + DEFINE_PROP_END_OF_LIST(), +}; + static void fsl_imx6_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx6_properties); dc->realize = fsl_imx6_realize; dc->desc = "i.MX6 SOC"; /* Reason: Uses serial_hd() in the realize() function */ -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: c850187322be9930e47c8b234c385a7d0da245cb.1593806826.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: updated for object_property_set_uint() argument reordering] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 1 + hw/arm/fsl-imx7.c | 9 +++++++++ 2 files changed, 10 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX7State { IMX7GPRState gpr; ChipideaState usb[FSL_IMX7_NUM_USBS]; DesignwarePCIEHost pcie; + uint32_t phy_num[FSL_IMX7_NUM_ETHS]; } FslIMX7State; enum FslIMX7MemoryMap { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_ENET2_ADDR, }; + object_property_set_uint(OBJECT(&s->eth[i]), "phy-num", + s->phy_num[i], &error_abort); object_property_set_uint(OBJECT(&s->eth[i]), "tx-ring-num", FSL_IMX7_ETH_NUM_TX_RINGS, &error_abort); qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_PCIE_PHY_SIZE); } +static Property fsl_imx7_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslIMX7State, phy_num[0], 0), + DEFINE_PROP_UINT32("fec2-phy-num", FslIMX7State, phy_num[1], 1), + DEFINE_PROP_END_OF_LIST(), +}; + static void fsl_imx7_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx7_properties); dc->realize = fsl_imx7_realize; /* Reason: Uses serial_hds and nd_table in realize() directly */ -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> Raw writes to this register when in KVM mode can cause interrupts to be raised (even when the PMU is disabled). Because the underlying state is already aliased to PMINTENSET (which already provides raw write functions), we can safely disable raw accesses to PMINTENCLR entirely. Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Message-id: 20200707152616.1917154-1-aaron@os.amperecomputing.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .resetvalue = 0x0 }, { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2, .access = PL1_RW, .accessfn = access_tpm, - .type = ARM_CP_ALIAS | ARM_CP_IO, + .type = ARM_CP_ALIAS | ARM_CP_IO | ARM_CP_NO_RAW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), .writefn = pmintenclr_write, }, { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2, .access = PL1_RW, .accessfn = access_tpm, - .type = ARM_CP_ALIAS | ARM_CP_IO, + .type = ARM_CP_ALIAS | ARM_CP_IO | ARM_CP_NO_RAW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), .writefn = pmintenclr_write }, { .name = "CCSIDR", .state = ARM_CP_STATE_BOTH, -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Coverity points out (CID 1430180) that the new case is missing break or a /* fallthrough */ comment. Break is the right thing to do as in that case, tail is not used. Fixes 1733eebb9e ("virtio-iommu: Implement RESV_MEM probe request") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200708160147.18426-1-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/virtio/virtio-iommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu.c +++ b/hw/virtio/virtio-iommu.c @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) ptail = (struct virtio_iommu_req_tail *) (buf + s->config.probe_size); ptail->status = virtio_iommu_handle_probe(s, iov, iov_cnt, buf); + break; } default: tail.status = VIRTIO_IOMMU_S_UNSUPP; -- 2.20.1 From: David CARLIER <devnexen@gmail.com> Tell Haiku to provide various BSD functions by setting BSD_SOURCE and linking libbsd. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-2-peter.maydell@linaro.org [PMM: expanded commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ SunOS) ;; Haiku) haiku="yes" - QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS" - LIBS="-lposix_error_mapper -lnetwork $LIBS" + QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS -DBSD_SOURCE $QEMU_CFLAGS" + LIBS="-lposix_error_mapper -lnetwork -lbsd $LIBS" ;; Linux) audio_drv_list="try-pa oss" -- 2.20.1 From: David CARLIER <devnexen@gmail.com> Instead of using an OS-specific ifdef test to select the "openpty() is in pty.h" codepath, make configure check for the existence of the header and use the new CONFIG_PTY instead. This is necessary to build on Haiku, which also provides openpty() via pty.h. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-3-peter.maydell@linaro.org [PMM: Expanded commit message; rename to HAVE_PTY_H] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 9 +++++++++ util/qemu-openpty.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ else l2tpv3=no fi +if check_include "pty.h" ; then + pty_h=yes +else + pty_h=no +fi + ######################################### # vhost interdependencies and host support @@ -XXX,XX +XXX,XX @@ fi if test "$sheepdog" = "yes" ; then echo "CONFIG_SHEEPDOG=y" >> $config_host_mak fi +if test "$pty_h" = "yes" ; then + echo "HAVE_PTY_H=y" >> $config_host_mak +fi if test "$fuzzing" = "yes" ; then if test "$have_fuzzer" = "yes"; then FUZZ_LDFLAGS=" -fsanitize=address,fuzzer" diff --git a/util/qemu-openpty.c b/util/qemu-openpty.c index XXXXXXX..XXXXXXX 100644 --- a/util/qemu-openpty.c +++ b/util/qemu-openpty.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" -#if defined(__GLIBC__) +#if defined HAVE_PTY_H # include <pty.h> #elif defined CONFIG_BSD # include <termios.h> -- 2.20.1 From: David CARLIER <devnexen@gmail.com> Instead of assuming that all POSIX platforms provide mlockall(), test for it in configure. If the host doesn't provide this platform then os_mlock() will fail -ENOSYS, as it does already on Windows. This is necessary for Haiku, which does not have mlockall(). Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-4-peter.maydell@linaro.org [PMM: Expanded commit message; rename to HAVE_MLOCKALL] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 15 +++++++++++++++ os-posix.c | 4 ++++ 2 files changed, 19 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ else pty_h=no fi +cat > $TMPC <<EOF +#include <sys/mman.h> +int main(int argc, char *argv[]) { + return mlockall(MCL_FUTURE); +} +EOF +if compile_prog "" "" ; then + have_mlockall=yes +else + have_mlockall=no +fi + ######################################### # vhost interdependencies and host support @@ -XXX,XX +XXX,XX @@ fi if test "$pty_h" = "yes" ; then echo "HAVE_PTY_H=y" >> $config_host_mak fi +if test "$have_mlockall" = "yes" ; then + echo "HAVE_MLOCKALL=y" >> $config_host_mak +fi if test "$fuzzing" = "yes" ; then if test "$have_fuzzer" = "yes"; then FUZZ_LDFLAGS=" -fsanitize=address,fuzzer" diff --git a/os-posix.c b/os-posix.c index XXXXXXX..XXXXXXX 100644 --- a/os-posix.c +++ b/os-posix.c @@ -XXX,XX +XXX,XX @@ bool is_daemonized(void) int os_mlock(void) { +#ifdef HAVE_MLOCKALL int ret = 0; ret = mlockall(MCL_CURRENT | MCL_FUTURE); @@ -XXX,XX +XXX,XX @@ int os_mlock(void) } return ret; +#else + return -ENOSYS; +#endif } -- 2.20.1 From: David CARLIER <devnexen@gmail.com> Regularize our handling of <sys/signal.h>: currently we include it in osdep.h, but only for OpenBSD, and we include it without an ifdef guard in a couple of C files. This causes problems for Haiku, which doesn't have that header. Instead, check in configure whether sys/signal.h exists, and if it does then always include it from osdep.h. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-5-peter.maydell@linaro.org [PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 10 ++++++++++ include/qemu/osdep.h | 2 +- hw/xen/xen-legacy-backend.c | 1 - util/oslib-posix.c | 1 - 4 files changed, 11 insertions(+), 3 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if check_include "libdrm/drm.h" ; then have_drm_h=yes fi +######################################### +# sys/signal.h check +have_sys_signal_h=no +if check_include "sys/signal.h" ; then + have_sys_signal_h=yes +fi + ########################################## # VTE probe @@ -XXX,XX +XXX,XX @@ fi if test "$have_openpty" = "yes" ; then echo "HAVE_OPENPTY=y" >> $config_host_mak fi +if test "$have_sys_signal_h" = "yes" ; then + echo "HAVE_SYS_SIGNAL_H=y" >> $config_host_mak +fi # Work around a system header bug with some kernel/XFS header # versions where they both try to define 'struct fsxattr': diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ extern int daemon(int, int); #include <setjmp.h> #include <signal.h> -#ifdef __OpenBSD__ +#ifdef HAVE_SYS_SIGNAL_H #include <sys/signal.h> #endif diff --git a/hw/xen/xen-legacy-backend.c b/hw/xen/xen-legacy-backend.c index XXXXXXX..XXXXXXX 100644 --- a/hw/xen/xen-legacy-backend.c +++ b/hw/xen/xen-legacy-backend.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include <sys/signal.h> #include "hw/sysbus.h" #include "hw/boards.h" diff --git a/util/oslib-posix.c b/util/oslib-posix.c index XXXXXXX..XXXXXXX 100644 --- a/util/oslib-posix.c +++ b/util/oslib-posix.c @@ -XXX,XX +XXX,XX @@ #include "qemu/sockets.h" #include "qemu/thread.h" #include <libgen.h> -#include <sys/signal.h> #include "qemu/cutils.h" #ifdef CONFIG_LINUX -- 2.20.1 From: David CARLIER <devnexen@gmail.com> Haiku doesn't provide SIGIO; fix this up in osdep.h by defining it as equal to SIGPOLL. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-6-peter.maydell@linaro.org [PMM: Expanded commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/qemu/osdep.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ void qemu_anon_ram_free(void *ptr, size_t size); #define HAVE_CHARDEV_PARPORT 1 #endif +#if defined(__HAIKU__) +#define SIGIO SIGPOLL +#endif + #if defined(CONFIG_LINUX) #ifndef BUS_MCEERR_AR #define BUS_MCEERR_AR 4 -- 2.20.1 From: David CARLIER <devnexen@gmail.com> Haiku puts the bswap* functions in <endian.h>; pull in that include file on that platform. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-7-peter.maydell@linaro.org [PMM: Expanded commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/qemu/bswap.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/qemu/bswap.h b/include/qemu/bswap.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/bswap.h +++ b/include/qemu/bswap.h @@ -XXX,XX +XXX,XX @@ # include <machine/bswap.h> #elif defined(__FreeBSD__) # include <sys/endian.h> +#elif defined(__HAIKU__) +# include <endian.h> #elif defined(CONFIG_BYTESWAP_H) # include <byteswap.h> -- 2.20.1 From: David CARLIER <devnexen@gmail.com> util/compatfd.c includes <sys/syscall.h> so that the CONFIG_SIGNALFD code can use SYS_signalfd. Guard the #include with CONFIG_SIGNALFD to avoid portability issues on hosts like Haiku which do not provide that header file. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-8-peter.maydell@linaro.org [PMM: Expanded commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- util/compatfd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/util/compatfd.c b/util/compatfd.c index XXXXXXX..XXXXXXX 100644 --- a/util/compatfd.c +++ b/util/compatfd.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/thread.h" +#if defined(CONFIG_SIGNALFD) #include <sys/syscall.h> +#endif struct sigfd_compat_info { -- 2.20.1 From: David CARLIER <devnexen@gmail.com> The qemu_init_exec_dir() function is inherently non-portable; provide an implementation for Haiku hosts. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-9-peter.maydell@linaro.org [PMM: Expanded commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- util/oslib-posix.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/util/oslib-posix.c b/util/oslib-posix.c index XXXXXXX..XXXXXXX 100644 --- a/util/oslib-posix.c +++ b/util/oslib-posix.c @@ -XXX,XX +XXX,XX @@ #include <mach-o/dyld.h> #endif +#ifdef __HAIKU__ +#include <kernel/image.h> +#endif + #include "qemu/mmap-alloc.h" #ifdef CONFIG_DEBUG_STACK_USAGE @@ -XXX,XX +XXX,XX @@ void qemu_init_exec_dir(const char *argv0) } } } +#elif defined(__HAIKU__) + { + image_info ii; + int32_t c = 0; + + *buf = '\0'; + while (get_next_image_info(0, &c, &ii) == B_OK) { + if (ii.type == B_APP_IMAGE) { + strncpy(buf, ii.name, sizeof(buf)); + buf[sizeof(buf) - 1] = 0; + p = buf; + break; + } + } + } #endif /* If we don't have any way of figuring out the actual executable location then try argv[0]. */ -- 2.20.1 From: Gerd Hoffmann <kraxel@redhat.com> Given this isn't perforance critical at all lets avoid the non-portable d_type and use fstat instead to check whenever the file is a chardev. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reported-by: David Carlier <devnexen@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-10-peter.maydell@linaro.org Message-id: 20200701180302.14821-1-kraxel@redhat.com [PMM: fixed comment style; tweaked subject line] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- util/drm.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/util/drm.c b/util/drm.c index XXXXXXX..XXXXXXX 100644 --- a/util/drm.c +++ b/util/drm.c @@ -XXX,XX +XXX,XX @@ int qemu_drm_rendernode_open(const char *rendernode) { DIR *dir; struct dirent *e; - int r, fd; + struct stat st; + int r, fd, ret; char *p; if (rendernode) { @@ -XXX,XX +XXX,XX @@ int qemu_drm_rendernode_open(const char *rendernode) fd = -1; while ((e = readdir(dir))) { - if (e->d_type != DT_CHR) { - continue; - } - if (strncmp(e->d_name, "renderD", 7)) { continue; } @@ -XXX,XX +XXX,XX @@ int qemu_drm_rendernode_open(const char *rendernode) g_free(p); continue; } + + /* + * prefer fstat() over checking e->d_type == DT_CHR for + * portability reasons + */ + ret = fstat(r, &st); + if (ret < 0 || (st.st_mode & S_IFMT) != S_IFCHR) { + close(r); + g_free(p); + continue; + } + fd = r; g_free(p); break; -- 2.20.1 From: Wentong Wu <wentong.wu@intel.com> Add DISAS_NORETURN case for nothing more to generate because at runtime execution will never return from some helper call. And at the same time replace DISAS_UPDATE in t_gen_helper_raise_exception and gen_exception with the newly added DISAS_NORETURN. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Message-id: 20200710233433.19729-1-wentong.wu@intel.com Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/nios2/translate.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/nios2/translate.c b/target/nios2/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/nios2/translate.c +++ b/target/nios2/translate.c @@ -XXX,XX +XXX,XX @@ static void t_gen_helper_raise_exception(DisasContext *dc, tcg_gen_movi_tl(dc->cpu_R[R_PC], dc->pc); gen_helper_raise_exception(dc->cpu_env, tmp); tcg_temp_free_i32(tmp); - dc->is_jmp = DISAS_UPDATE; + dc->is_jmp = DISAS_NORETURN; } static bool use_goto_tb(DisasContext *dc, uint32_t dest) @@ -XXX,XX +XXX,XX @@ static void gen_exception(DisasContext *dc, uint32_t excp) tcg_gen_movi_tl(cpu_R[R_PC], dc->pc); gen_helper_raise_exception(cpu_env, tmp); tcg_temp_free_i32(tmp); - dc->is_jmp = DISAS_UPDATE; + dc->is_jmp = DISAS_NORETURN; } /* generate intermediate code for basic block 'tb'. */ @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cs, TranslationBlock *tb, int max_insns) tcg_gen_exit_tb(NULL, 0); break; + case DISAS_NORETURN: case DISAS_TB_JUMP: /* nothing more to generate */ break; -- 2.20.1 From: Wentong Wu <wentong.wu@intel.com> In line the semantics of DISAS_UPDATE on nios2 target with other targets which is to explicitly write the PC back into the cpu state before doing a tcg_gen_exit_tb(). Signed-off-by: Wentong Wu <wentong.wu@intel.com> Message-id: 20200710233433.19729-2-wentong.wu@intel.com Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/nios2/translate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/nios2/translate.c b/target/nios2/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/nios2/translate.c +++ b/target/nios2/translate.c @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cs, TranslationBlock *tb, int max_insns) /* Indicate where the next block should start */ switch (dc->is_jmp) { case DISAS_NEXT: + case DISAS_UPDATE: /* Save the current PC back into the CPU register */ tcg_gen_movi_tl(cpu_R[R_PC], dc->pc); tcg_gen_exit_tb(NULL, 0); @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cs, TranslationBlock *tb, int max_insns) default: case DISAS_JUMP: - case DISAS_UPDATE: /* The jump will already have updated the PC register */ tcg_gen_exit_tb(NULL, 0); break; -- 2.20.1 From: Wentong Wu <wentong.wu@intel.com> wrctl instruction on nios2 target will cause checking cpu interrupt but tcg_handle_interrupt() will call cpu_abort() if the CPU gets an interrupt while it's not in 'can do IO' state, so add gen_io_start around wrctl instruction. Also at the same time, end the onging TB with DISAS_UPDATE. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Message-id: 20200710233433.19729-3-wentong.wu@intel.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/nios2/translate.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/nios2/translate.c b/target/nios2/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/nios2/translate.c +++ b/target/nios2/translate.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "exec/translator.h" #include "qemu/qemu-print.h" +#include "exec/gen-icount.h" /* is_jmp field values */ #define DISAS_JUMP DISAS_TARGET_0 /* only pc was modified dynamically */ @@ -XXX,XX +XXX,XX @@ static void wrctl(DisasContext *dc, uint32_t code, uint32_t flags) /* If interrupts were enabled using WRCTL, trigger them. */ #if !defined(CONFIG_USER_ONLY) if ((instr.imm5 + CR_BASE) == CR_STATUS) { + if (tb_cflags(dc->tb) & CF_USE_ICOUNT) { + gen_io_start(); + } gen_helper_check_interrupts(dc->cpu_env); + dc->is_jmp = DISAS_UPDATE; } #endif } -- 2.20.1 From: Wentong Wu <wentong.wu@intel.com> Only when guest code is unmasking interrupts, terminate the excution of translated code and exit to the main CPU loop to handle previous pended interrupts because of the interrupts mask by guest code. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Message-id: 20200710233433.19729-4-wentong.wu@intel.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nios2/cpu_pic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nios2/cpu_pic.c +++ b/hw/nios2/cpu_pic.c @@ -XXX,XX +XXX,XX @@ static void nios2_pic_cpu_handler(void *opaque, int irq, int level) void nios2_check_interrupts(CPUNios2State *env) { - if (env->irq_pending) { + if (env->irq_pending && + (env->regs[CR_STATUS] & CR_STATUS_PIE)) { env->irq_pending = 0; cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HARD); } -- 2.20.1 Remove the hardcoded tabs from hw/arm/tosa.c. There aren't many, but since they're all in constant #defines they're not going to go away with our usual "only when we touch a function" policy on reformatting. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628203748.14250-2-peter.maydell@linaro.org --- hw/arm/tosa.c | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "exec/address-spaces.h" -#define TOSA_RAM 0x04000000 -#define TOSA_ROM 0x00800000 +#define TOSA_RAM 0x04000000 +#define TOSA_ROM 0x00800000 -#define TOSA_GPIO_USB_IN (5) -#define TOSA_GPIO_nSD_DETECT (9) -#define TOSA_GPIO_ON_RESET (19) -#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ -#define TOSA_GPIO_CF_CD (13) -#define TOSA_GPIO_TC6393XB_INT (15) -#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ +#define TOSA_GPIO_USB_IN (5) +#define TOSA_GPIO_nSD_DETECT (9) +#define TOSA_GPIO_ON_RESET (19) +#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ +#define TOSA_GPIO_CF_CD (13) +#define TOSA_GPIO_TC6393XB_INT (15) +#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ -#define TOSA_SCOOP_GPIO_BASE 1 -#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) -#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) -#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) +#define TOSA_SCOOP_GPIO_BASE 1 +#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) +#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) +#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) -#define TOSA_SCOOP_JC_GPIO_BASE 1 -#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) -#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) -#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) -#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) -#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) +#define TOSA_SCOOP_JC_GPIO_BASE 1 +#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) +#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) +#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) +#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) +#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) -#define DAC_BASE 0x4e -#define DAC_CH1 0 -#define DAC_CH2 1 +#define DAC_BASE 0x4e +#define DAC_CH1 0 +#define DAC_CH2 1 static void tosa_microdrive_attach(PXA2xxState *cpu) { -- 2.20.1 Currently we have a free-floating set of IRQs and a function tosa_out_switch() which handle the GPIO lines on the tosa board which connect to LEDs, and another free-floating IRQ and tosa_reset() function to handle the GPIO line that resets the system. Encapsulate this behaviour in a simple QOM device. This commit fixes Coverity issue CID 1421929 (which pointed out that the 'outsignals' in tosa_gpio_setup() were leaked), because it removes the use of the qemu_allocate_irqs() API from this code entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628203748.14250-3-peter.maydell@linaro.org --- hw/arm/tosa.c | 88 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 64 insertions(+), 24 deletions(-) diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ static void tosa_microdrive_attach(PXA2xxState *cpu) pxa2xx_pcmcia_attach(cpu->pcmcia[0], md); } -static void tosa_out_switch(void *opaque, int line, int level) +/* + * Encapsulation of some GPIO line behaviour for the Tosa board + * + * QEMU interface: + * + named GPIO inputs "leds[0..3]": assert to light LEDs + * + named GPIO input "reset": when asserted, resets the system + */ + +#define TYPE_TOSA_MISC_GPIO "tosa-misc-gpio" +#define TOSA_MISC_GPIO(obj) \ + OBJECT_CHECK(TosaMiscGPIOState, (obj), TYPE_TOSA_MISC_GPIO) + +typedef struct TosaMiscGPIOState { + SysBusDevice parent_obj; +} TosaMiscGPIOState; + +static void tosa_gpio_leds(void *opaque, int line, int level) { switch (line) { - case 0: - fprintf(stderr, "blue LED %s.\n", level ? "on" : "off"); - break; - case 1: - fprintf(stderr, "green LED %s.\n", level ? "on" : "off"); - break; - case 2: - fprintf(stderr, "amber LED %s.\n", level ? "on" : "off"); - break; - case 3: - fprintf(stderr, "wlan LED %s.\n", level ? "on" : "off"); - break; - default: - fprintf(stderr, "Uhandled out event: %d = %d\n", line, level); - break; + case 0: + fprintf(stderr, "blue LED %s.\n", level ? "on" : "off"); + break; + case 1: + fprintf(stderr, "green LED %s.\n", level ? "on" : "off"); + break; + case 2: + fprintf(stderr, "amber LED %s.\n", level ? "on" : "off"); + break; + case 3: + fprintf(stderr, "wlan LED %s.\n", level ? "on" : "off"); + break; + default: + g_assert_not_reached(); } } @@ -XXX,XX +XXX,XX @@ static void tosa_reset(void *opaque, int line, int level) } } +static void tosa_misc_gpio_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, tosa_gpio_leds, "leds", 4); + qdev_init_gpio_in_named(dev, tosa_reset, "reset", 1); +} + static void tosa_gpio_setup(PXA2xxState *cpu, DeviceState *scp0, DeviceState *scp1, TC6393xbState *tmio) { - qemu_irq *outsignals = qemu_allocate_irqs(tosa_out_switch, cpu, 4); - qemu_irq reset; + DeviceState *misc_gpio; + + misc_gpio = sysbus_create_simple(TYPE_TOSA_MISC_GPIO, -1, NULL); /* MMC/SD host */ pxa2xx_mmci_handlers(cpu->mmc, @@ -XXX,XX +XXX,XX @@ static void tosa_gpio_setup(PXA2xxState *cpu, qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT))); /* Handle reset */ - reset = qemu_allocate_irq(tosa_reset, cpu, 0); - qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET, reset); + qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET, + qdev_get_gpio_in_named(misc_gpio, "reset", 0)); /* PCMCIA signals: card's IRQ and Card-Detect */ pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], @@ -XXX,XX +XXX,XX @@ static void tosa_gpio_setup(PXA2xxState *cpu, qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ), NULL); - qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED, outsignals[0]); - qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED, outsignals[1]); - qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED, outsignals[2]); - qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED, outsignals[3]); + qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED, + qdev_get_gpio_in_named(misc_gpio, "leds", 0)); + qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED, + qdev_get_gpio_in_named(misc_gpio, "leds", 1)); + qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED, + qdev_get_gpio_in_named(misc_gpio, "leds", 2)); + qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED, + qdev_get_gpio_in_named(misc_gpio, "leds", 3)); qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio)); @@ -XXX,XX +XXX,XX @@ static const TypeInfo tosa_ssp_info = { .class_init = tosa_ssp_class_init, }; +static const TypeInfo tosa_misc_gpio_info = { + .name = "tosa-misc-gpio", + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(TosaMiscGPIOState), + .instance_init = tosa_misc_gpio_init, + /* + * No class init required: device has no internal state so does not + * need to set up reset or vmstate, and has no realize method. + */ +}; + static void tosa_register_types(void) { type_register_static(&tosa_dac_info); type_register_static(&tosa_ssp_info); + type_register_static(&tosa_misc_gpio_info); } type_init(tosa_register_types) -- 2.20.1 Remove hard-tabs from palm.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628214230.2592-2-peter.maydell@linaro.org --- hw/arm/palm.c | 64 +++++++++++++++++++++++++-------------------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { /* Palm Tunsgten|E support */ /* Shared GPIOs */ -#define PALMTE_USBDETECT_GPIO 0 -#define PALMTE_USB_OR_DC_GPIO 1 -#define PALMTE_TSC_GPIO 4 -#define PALMTE_PINTDAV_GPIO 6 -#define PALMTE_MMC_WP_GPIO 8 -#define PALMTE_MMC_POWER_GPIO 9 -#define PALMTE_HDQ_GPIO 11 -#define PALMTE_HEADPHONES_GPIO 14 -#define PALMTE_SPEAKER_GPIO 15 +#define PALMTE_USBDETECT_GPIO 0 +#define PALMTE_USB_OR_DC_GPIO 1 +#define PALMTE_TSC_GPIO 4 +#define PALMTE_PINTDAV_GPIO 6 +#define PALMTE_MMC_WP_GPIO 8 +#define PALMTE_MMC_POWER_GPIO 9 +#define PALMTE_HDQ_GPIO 11 +#define PALMTE_HEADPHONES_GPIO 14 +#define PALMTE_SPEAKER_GPIO 15 /* MPU private GPIOs */ -#define PALMTE_DC_GPIO 2 -#define PALMTE_MMC_SWITCH_GPIO 4 -#define PALMTE_MMC1_GPIO 6 -#define PALMTE_MMC2_GPIO 7 -#define PALMTE_MMC3_GPIO 11 +#define PALMTE_DC_GPIO 2 +#define PALMTE_MMC_SWITCH_GPIO 4 +#define PALMTE_MMC1_GPIO 6 +#define PALMTE_MMC2_GPIO 7 +#define PALMTE_MMC3_GPIO 11 static MouseTransformInfo palmte_pointercal = { .x = 320, @@ -XXX,XX +XXX,XX @@ static struct { int column; } palmte_keymap[0x80] = { [0 ... 0x7f] = { -1, -1 }, - [0x3b] = { 0, 0 }, /* F1 -> Calendar */ - [0x3c] = { 1, 0 }, /* F2 -> Contacts */ - [0x3d] = { 2, 0 }, /* F3 -> Tasks List */ - [0x3e] = { 3, 0 }, /* F4 -> Note Pad */ - [0x01] = { 4, 0 }, /* Esc -> Power */ - [0x4b] = { 0, 1 }, /* Left */ - [0x50] = { 1, 1 }, /* Down */ - [0x48] = { 2, 1 }, /* Up */ - [0x4d] = { 3, 1 }, /* Right */ - [0x4c] = { 4, 1 }, /* Centre */ - [0x39] = { 4, 1 }, /* Spc -> Centre */ + [0x3b] = { 0, 0 }, /* F1 -> Calendar */ + [0x3c] = { 1, 0 }, /* F2 -> Contacts */ + [0x3d] = { 2, 0 }, /* F3 -> Tasks List */ + [0x3e] = { 3, 0 }, /* F4 -> Note Pad */ + [0x01] = { 4, 0 }, /* Esc -> Power */ + [0x4b] = { 0, 1 }, /* Left */ + [0x50] = { 1, 1 }, /* Down */ + [0x48] = { 2, 1 }, /* Up */ + [0x4d] = { 3, 1 }, /* Right */ + [0x4c] = { 4, 1 }, /* Centre */ + [0x39] = { 4, 1 }, /* Spc -> Centre */ }; static void palmte_button_event(void *opaque, int keycode) @@ -XXX,XX +XXX,XX @@ static void palmte_gpio_setup(struct omap_mpu_state_s *cpu) [PALMTE_MMC_SWITCH_GPIO])); misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7); - qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]); - qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]); - qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]); - qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]); - qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]); - omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]); - omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]); + qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]); + qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]); + qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]); + qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]); + qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]); + omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]); + omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]); /* Reset some inputs to initial state. */ qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO)); -- 2.20.1 Replace the free-floating set of IRQs and palmte_onoff_gpios() function with a simple QOM device that encapsulates this behaviour. This fixes Coverity issue CID 1421944, which points out that the memory returned by qemu_allocate_irqs() is leaked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628214230.2592-3-peter.maydell@linaro.org --- hw/arm/palm.c | 61 +++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 52 insertions(+), 9 deletions(-) diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static void palmte_button_event(void *opaque, int keycode) !(keycode & 0x80)); } +/* + * Encapsulation of some GPIO line behaviour for the Palm board + * + * QEMU interface: + * + unnamed GPIO inputs 0..6: for the various miscellaneous input lines + */ + +#define TYPE_PALM_MISC_GPIO "palm-misc-gpio" +#define PALM_MISC_GPIO(obj) \ + OBJECT_CHECK(PalmMiscGPIOState, (obj), TYPE_PALM_MISC_GPIO) + +typedef struct PalmMiscGPIOState { + SysBusDevice parent_obj; +} PalmMiscGPIOState; + static void palmte_onoff_gpios(void *opaque, int line, int level) { switch (line) { @@ -XXX,XX +XXX,XX @@ static void palmte_onoff_gpios(void *opaque, int line, int level) } } +static void palm_misc_gpio_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in(dev, palmte_onoff_gpios, 7); +} + +static const TypeInfo palm_misc_gpio_info = { + .name = TYPE_PALM_MISC_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(PalmMiscGPIOState), + .instance_init = palm_misc_gpio_init, + /* + * No class init required: device has no internal state so does not + * need to set up reset or vmstate, and has no realize method. + */ +}; + static void palmte_gpio_setup(struct omap_mpu_state_s *cpu) { - qemu_irq *misc_gpio; + DeviceState *misc_gpio; + + misc_gpio = sysbus_create_simple(TYPE_PALM_MISC_GPIO, -1, NULL); omap_mmc_handlers(cpu->mmc, qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO), qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio) [PALMTE_MMC_SWITCH_GPIO])); - misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7); - qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]); - qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]); - qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]); - qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]); - qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]); - omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]); - omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]); + qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, + qdev_get_gpio_in(misc_gpio, 0)); + qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, + qdev_get_gpio_in(misc_gpio, 1)); + qdev_connect_gpio_out(cpu->gpio, 11, qdev_get_gpio_in(misc_gpio, 2)); + qdev_connect_gpio_out(cpu->gpio, 12, qdev_get_gpio_in(misc_gpio, 3)); + qdev_connect_gpio_out(cpu->gpio, 13, qdev_get_gpio_in(misc_gpio, 4)); + omap_mpuio_out_set(cpu->mpuio, 1, qdev_get_gpio_in(misc_gpio, 5)); + omap_mpuio_out_set(cpu->mpuio, 3, qdev_get_gpio_in(misc_gpio, 6)); /* Reset some inputs to initial state. */ qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO)); @@ -XXX,XX +XXX,XX @@ static void palmte_machine_init(MachineClass *mc) } DEFINE_MACHINE("cheetah", palmte_machine_init) + +static void palm_register_types(void) +{ + type_register_static(&palm_misc_gpio_info); +} + +type_init(palm_register_types) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Since added in commit 2bea128c3d, each SDHCI is wired with a SD card, using empty card when no block drive provided. This is not the desired behavior. The SDHCI exposes a SD bus to plug cards on, if no card available, it is fine to have an unplugged bus. Avoid creating unnecessary SD card device when no block drive provided. Fixes: 2bea128c3d ("hw/sd/aspeed_sdhci: New device") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200705173402.15620-1-f4bug@amsat.org Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo) { DeviceState *card; - card = qdev_new(TYPE_SD_CARD); - if (dinfo) { - qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), - &error_fatal); + if (!dinfo) { + return; } + card = qdev_new(TYPE_SD_CARD); + qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), + &error_fatal); qdev_realize_and_unref(card, qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), &error_fatal); -- 2.20.1 First pullreq for 6.0: mostly my v8.1M work, plus some other bits and pieces. (I still have a lot of stuff in my to-review folder, which I may or may not get to before the Christmas break...) thanks -- PMM The following changes since commit 5e7b204dbfae9a562fc73684986f936b97f63877: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2020-12-09 20:08:54 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201210 for you to fetch changes up to 71f916be1c7e9ede0e37d9cabc781b5a9e8638ff: hw/arm/armv7m: Correct typo in QOM object name (2020-12-10 11:44:56 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm/smmuv3: Fix up L1STD_SPAN decoding * xlnx-zynqmp: Support Xilinx ZynqMP CAN controllers * sbsa-ref: allow to use Cortex-A53/57/72 cpus * Various minor code cleanups * hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault * Implement more pieces of ARMv8.1M support ---------------------------------------------------------------- Alex Chen (4): i.MX25: Fix bad printf format specifiers i.MX31: Fix bad printf format specifiers i.MX6: Fix bad printf format specifiers i.MX6ul: Fix bad printf format specifiers Havard Skinnemoen (1): tests/qtest/npcm7xx_rng-test: dump random data on failure Kunkun Jiang (1): hw/arm/smmuv3: Fix up L1STD_SPAN decoding Marcin Juszkiewicz (1): sbsa-ref: allow to use Cortex-A53/57/72 cpus Peter Maydell (25): hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault target/arm: Implement v8.1M PXN extension target/arm: Don't clobber ID_PFR1.Security on M-profile cores target/arm: Implement VSCCLRM insn target/arm: Implement CLRM instruction target/arm: Enforce M-profile VMRS/VMSR register restrictions target/arm: Refactor M-profile VMSR/VMRS handling target/arm: Move general-use constant expanders up in translate.c target/arm: Implement VLDR/VSTR system register target/arm: Implement M-profile FPSCR_nzcvqc target/arm: Use new FPCR_NZCV_MASK constant target/arm: Factor out preserve-fp-state from full_vfp_access_check() target/arm: Implement FPCXT_S fp system register hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures target/arm: Implement v8.1M REVIDR register target/arm: Implement new v8.1M NOCP check for exception return target/arm: Implement new v8.1M VLLDM and VLSTM encodings hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit target/arm: Implement CCR_S.TRD behaviour for SG insns hw/intc/armv7m_nvic: Fix "return from inactive handler" check target/arm: Implement M-profile "minimal RAS implementation" hw/intc/armv7m_nvic: Implement read/write for RAS register block hw/arm/armv7m: Correct typo in QOM object name Vikram Garhwal (4): hw/net/can: Introduce Xilinx ZynqMP CAN controller xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller MAINTAINERS: Add maintainer entry for Xilinx ZynqMP CAN controller meson.build | 1 + hw/arm/smmuv3-internal.h | 2 +- hw/net/can/trace.h | 1 + include/hw/arm/xlnx-zynqmp.h | 8 + include/hw/intc/armv7m_nvic.h | 2 + include/hw/net/xlnx-zynqmp-can.h | 78 +++ target/arm/cpu.h | 46 ++ target/arm/m-nocp.decode | 10 +- target/arm/t32.decode | 10 +- target/arm/vfp.decode | 14 + hw/arm/armv7m.c | 4 +- hw/arm/sbsa-ref.c | 23 +- hw/arm/xlnx-zcu102.c | 20 + hw/arm/xlnx-zynqmp.c | 34 ++ hw/intc/armv7m_nvic.c | 246 ++++++-- hw/misc/imx25_ccm.c | 12 +- hw/misc/imx31_ccm.c | 14 +- hw/misc/imx6_ccm.c | 20 +- hw/misc/imx6_src.c | 2 +- hw/misc/imx6ul_ccm.c | 4 +- hw/misc/imx_ccm.c | 4 +- hw/net/can/xlnx-zynqmp-can.c | 1161 ++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 +- target/arm/helper.c | 7 +- target/arm/m_helper.c | 130 ++++- target/arm/translate.c | 105 +++- tests/qtest/npcm7xx_rng-test.c | 12 + tests/qtest/xlnx-can-test.c | 360 ++++++++++++ MAINTAINERS | 8 + hw/Kconfig | 1 + hw/net/can/meson.build | 1 + hw/net/can/trace-events | 9 + target/arm/translate-vfp.c.inc | 511 ++++++++++++++++- tests/qtest/meson.build | 1 + 34 files changed, 2713 insertions(+), 153 deletions(-) create mode 100644 hw/net/can/trace.h create mode 100644 include/hw/net/xlnx-zynqmp-can.h create mode 100644 hw/net/can/xlnx-zynqmp-can.c create mode 100644 tests/qtest/xlnx-can-test.c create mode 100644 hw/net/can/trace-events From: Kunkun Jiang <jiangkunkun@huawei.com> Accroding to the SMMUv3 spec, the SPAN field of Level1 Stream Table Descriptor is 5 bits([4:0]). Fixes: 9bde7f0674f(hw/arm/smmuv3: Implement translate callback) Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> Message-id: 20201124023711.1184-1-jiangkunkun@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t l1std_l2ptr(STEDesc *desc) return hi << 32 | lo; } -#define L1STD_SPAN(stm) (extract32((stm)->word[0], 0, 4)) +#define L1STD_SPAN(stm) (extract32((stm)->word[0], 0, 5)) #endif -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> The Xilinx ZynqMP CAN controller is developed based on SocketCAN, QEMU CAN bus implementation. Bus connection and socketCAN connection for each CAN module can be set through command lines. Example for using single CAN: -object can-bus,id=canbus0 \ -machine xlnx-zcu102.canbus0=canbus0 \ -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 Example for connecting both CAN to same virtual CAN on host machine: -object can-bus,id=canbus0 -object can-bus,id=canbus1 \ -machine xlnx-zcu102.canbus0=canbus0 \ -machine xlnx-zcu102.canbus1=canbus1 \ -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 \ -object can-host-socketcan,id=socketcan1,if=vcan0,canbus=canbus1 To create virtual CAN on the host machine, please check the QEMU CAN docs: https://github.com/qemu/qemu/blob/master/docs/can.txt Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-id: 1605728926-352690-2-git-send-email-fnu.vikram@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + hw/net/can/trace.h | 1 + include/hw/net/xlnx-zynqmp-can.h | 78 ++ hw/net/can/xlnx-zynqmp-can.c | 1161 ++++++++++++++++++++++++++++++ hw/Kconfig | 1 + hw/net/can/meson.build | 1 + hw/net/can/trace-events | 9 + 7 files changed, 1252 insertions(+) create mode 100644 hw/net/can/trace.h create mode 100644 include/hw/net/xlnx-zynqmp-can.h create mode 100644 hw/net/can/xlnx-zynqmp-can.c create mode 100644 hw/net/can/trace-events diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ if have_system 'hw/misc', 'hw/misc/macio', 'hw/net', + 'hw/net/can', 'hw/nvram', 'hw/pci', 'hw/pci-host', diff --git a/hw/net/can/trace.h b/hw/net/can/trace.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/can/trace.h @@ -0,0 +1 @@ +#include "trace/trace-hw_net_can.h" diff --git a/include/hw/net/xlnx-zynqmp-can.h b/include/hw/net/xlnx-zynqmp-can.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/xlnx-zynqmp-can.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP CAN controller. + * + * Copyright (c) 2020 Xilinx Inc. + * + * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com> + * + * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz Eren and + * Pavel Pisa. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef XLNX_ZYNQMP_CAN_H +#define XLNX_ZYNQMP_CAN_H + +#include "hw/register.h" +#include "net/can_emu.h" +#include "net/can_host.h" +#include "qemu/fifo32.h" +#include "hw/ptimer.h" +#include "hw/qdev-clock.h" + +#define TYPE_XLNX_ZYNQMP_CAN "xlnx.zynqmp-can" + +#define XLNX_ZYNQMP_CAN(obj) \ + OBJECT_CHECK(XlnxZynqMPCANState, (obj), TYPE_XLNX_ZYNQMP_CAN) + +#define MAX_CAN_CTRLS 2 +#define XLNX_ZYNQMP_CAN_R_MAX (0x84 / 4) +#define MAILBOX_CAPACITY 64 +#define CAN_TIMER_MAX 0XFFFFUL +#define CAN_DEFAULT_CLOCK (24 * 1000 * 1000) + +/* Each CAN_FRAME will have 4 * 32bit size. */ +#define CAN_FRAME_SIZE 4 +#define RXFIFO_SIZE (MAILBOX_CAPACITY * CAN_FRAME_SIZE) + +typedef struct XlnxZynqMPCANState { + SysBusDevice parent_obj; + MemoryRegion iomem; + + qemu_irq irq; + + CanBusClientState bus_client; + CanBusState *canbus; + + struct { + uint32_t ext_clk_freq; + } cfg; + + RegisterInfo reg_info[XLNX_ZYNQMP_CAN_R_MAX]; + uint32_t regs[XLNX_ZYNQMP_CAN_R_MAX]; + + Fifo32 rx_fifo; + Fifo32 tx_fifo; + Fifo32 txhpb_fifo; + + ptimer_state *can_timer; +} XlnxZynqMPCANState; + +#endif diff --git a/hw/net/can/xlnx-zynqmp-can.c b/hw/net/can/xlnx-zynqmp-can.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/can/xlnx-zynqmp-can.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP CAN controller. + * This implementation is based on the following datasheet: + * https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf + * + * Copyright (c) 2020 Xilinx Inc. + * + * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com> + * + * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz Eren and + * Pavel Pisa + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/register.h" +#include "hw/irq.h" +#include "qapi/error.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/cutils.h" +#include "sysemu/sysemu.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "net/can_emu.h" +#include "net/can_host.h" +#include "qemu/event_notifier.h" +#include "qom/object_interfaces.h" +#include "hw/net/xlnx-zynqmp-can.h" +#include "trace.h" + +#ifndef XLNX_ZYNQMP_CAN_ERR_DEBUG +#define XLNX_ZYNQMP_CAN_ERR_DEBUG 0 +#endif + +#define MAX_DLC 8 +#undef ERROR + +REG32(SOFTWARE_RESET_REGISTER, 0x0) + FIELD(SOFTWARE_RESET_REGISTER, CEN, 1, 1) + FIELD(SOFTWARE_RESET_REGISTER, SRST, 0, 1) +REG32(MODE_SELECT_REGISTER, 0x4) + FIELD(MODE_SELECT_REGISTER, SNOOP, 2, 1) + FIELD(MODE_SELECT_REGISTER, LBACK, 1, 1) + FIELD(MODE_SELECT_REGISTER, SLEEP, 0, 1) +REG32(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, 0x8) + FIELD(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, BRP, 0, 8) +REG32(ARBITRATION_PHASE_BIT_TIMING_REGISTER, 0xc) + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, SJW, 7, 2) + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS2, 4, 3) + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS1, 0, 4) +REG32(ERROR_COUNTER_REGISTER, 0x10) + FIELD(ERROR_COUNTER_REGISTER, REC, 8, 8) + FIELD(ERROR_COUNTER_REGISTER, TEC, 0, 8) +REG32(ERROR_STATUS_REGISTER, 0x14) + FIELD(ERROR_STATUS_REGISTER, ACKER, 4, 1) + FIELD(ERROR_STATUS_REGISTER, BERR, 3, 1) + FIELD(ERROR_STATUS_REGISTER, STER, 2, 1) + FIELD(ERROR_STATUS_REGISTER, FMER, 1, 1) + FIELD(ERROR_STATUS_REGISTER, CRCER, 0, 1) +REG32(STATUS_REGISTER, 0x18) + FIELD(STATUS_REGISTER, SNOOP, 12, 1) + FIELD(STATUS_REGISTER, ACFBSY, 11, 1) + FIELD(STATUS_REGISTER, TXFLL, 10, 1) + FIELD(STATUS_REGISTER, TXBFLL, 9, 1) + FIELD(STATUS_REGISTER, ESTAT, 7, 2) + FIELD(STATUS_REGISTER, ERRWRN, 6, 1) + FIELD(STATUS_REGISTER, BBSY, 5, 1) + FIELD(STATUS_REGISTER, BIDLE, 4, 1) + FIELD(STATUS_REGISTER, NORMAL, 3, 1) + FIELD(STATUS_REGISTER, SLEEP, 2, 1) + FIELD(STATUS_REGISTER, LBACK, 1, 1) + FIELD(STATUS_REGISTER, CONFIG, 0, 1) +REG32(INTERRUPT_STATUS_REGISTER, 0x1c) + FIELD(INTERRUPT_STATUS_REGISTER, TXFEMP, 14, 1) + FIELD(INTERRUPT_STATUS_REGISTER, TXFWMEMP, 13, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXFWMFLL, 12, 1) + FIELD(INTERRUPT_STATUS_REGISTER, WKUP, 11, 1) + FIELD(INTERRUPT_STATUS_REGISTER, SLP, 10, 1) + FIELD(INTERRUPT_STATUS_REGISTER, BSOFF, 9, 1) + FIELD(INTERRUPT_STATUS_REGISTER, ERROR, 8, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXNEMP, 7, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXOFLW, 6, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXUFLW, 5, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXOK, 4, 1) + FIELD(INTERRUPT_STATUS_REGISTER, TXBFLL, 3, 1) + FIELD(INTERRUPT_STATUS_REGISTER, TXFLL, 2, 1) + FIELD(INTERRUPT_STATUS_REGISTER, TXOK, 1, 1) + FIELD(INTERRUPT_STATUS_REGISTER, ARBLST, 0, 1) +REG32(INTERRUPT_ENABLE_REGISTER, 0x20) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFEMP, 14, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFWMEMP, 13, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXFWMFLL, 12, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, EWKUP, 11, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ESLP, 10, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, EBSOFF, 9, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, EERROR, 8, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXNEMP, 7, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXOFLW, 6, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXUFLW, 5, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXOK, 4, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXBFLL, 3, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFLL, 2, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXOK, 1, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, EARBLST, 0, 1) +REG32(INTERRUPT_CLEAR_REGISTER, 0x24) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFEMP, 14, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFWMEMP, 13, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXFWMFLL, 12, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CWKUP, 11, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CSLP, 10, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CBSOFF, 9, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CERROR, 8, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXNEMP, 7, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXOFLW, 6, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXUFLW, 5, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXOK, 4, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXBFLL, 3, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFLL, 2, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXOK, 1, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CARBLST, 0, 1) +REG32(TIMESTAMP_REGISTER, 0x28) + FIELD(TIMESTAMP_REGISTER, CTS, 0, 1) +REG32(WIR, 0x2c) + FIELD(WIR, EW, 8, 8) + FIELD(WIR, FW, 0, 8) +REG32(TXFIFO_ID, 0x30) + FIELD(TXFIFO_ID, IDH, 21, 11) + FIELD(TXFIFO_ID, SRRRTR, 20, 1) + FIELD(TXFIFO_ID, IDE, 19, 1) + FIELD(TXFIFO_ID, IDL, 1, 18) + FIELD(TXFIFO_ID, RTR, 0, 1) +REG32(TXFIFO_DLC, 0x34) + FIELD(TXFIFO_DLC, DLC, 28, 4) +REG32(TXFIFO_DATA1, 0x38) + FIELD(TXFIFO_DATA1, DB0, 24, 8) + FIELD(TXFIFO_DATA1, DB1, 16, 8) + FIELD(TXFIFO_DATA1, DB2, 8, 8) + FIELD(TXFIFO_DATA1, DB3, 0, 8) +REG32(TXFIFO_DATA2, 0x3c) + FIELD(TXFIFO_DATA2, DB4, 24, 8) + FIELD(TXFIFO_DATA2, DB5, 16, 8) + FIELD(TXFIFO_DATA2, DB6, 8, 8) + FIELD(TXFIFO_DATA2, DB7, 0, 8) +REG32(TXHPB_ID, 0x40) + FIELD(TXHPB_ID, IDH, 21, 11) + FIELD(TXHPB_ID, SRRRTR, 20, 1) + FIELD(TXHPB_ID, IDE, 19, 1) + FIELD(TXHPB_ID, IDL, 1, 18) + FIELD(TXHPB_ID, RTR, 0, 1) +REG32(TXHPB_DLC, 0x44) + FIELD(TXHPB_DLC, DLC, 28, 4) +REG32(TXHPB_DATA1, 0x48) + FIELD(TXHPB_DATA1, DB0, 24, 8) + FIELD(TXHPB_DATA1, DB1, 16, 8) + FIELD(TXHPB_DATA1, DB2, 8, 8) + FIELD(TXHPB_DATA1, DB3, 0, 8) +REG32(TXHPB_DATA2, 0x4c) + FIELD(TXHPB_DATA2, DB4, 24, 8) + FIELD(TXHPB_DATA2, DB5, 16, 8) + FIELD(TXHPB_DATA2, DB6, 8, 8) + FIELD(TXHPB_DATA2, DB7, 0, 8) +REG32(RXFIFO_ID, 0x50) + FIELD(RXFIFO_ID, IDH, 21, 11) + FIELD(RXFIFO_ID, SRRRTR, 20, 1) + FIELD(RXFIFO_ID, IDE, 19, 1) + FIELD(RXFIFO_ID, IDL, 1, 18) + FIELD(RXFIFO_ID, RTR, 0, 1) +REG32(RXFIFO_DLC, 0x54) + FIELD(RXFIFO_DLC, DLC, 28, 4) + FIELD(RXFIFO_DLC, RXT, 0, 16) +REG32(RXFIFO_DATA1, 0x58) + FIELD(RXFIFO_DATA1, DB0, 24, 8) + FIELD(RXFIFO_DATA1, DB1, 16, 8) + FIELD(RXFIFO_DATA1, DB2, 8, 8) + FIELD(RXFIFO_DATA1, DB3, 0, 8) +REG32(RXFIFO_DATA2, 0x5c) + FIELD(RXFIFO_DATA2, DB4, 24, 8) + FIELD(RXFIFO_DATA2, DB5, 16, 8) + FIELD(RXFIFO_DATA2, DB6, 8, 8) + FIELD(RXFIFO_DATA2, DB7, 0, 8) +REG32(AFR, 0x60) + FIELD(AFR, UAF4, 3, 1) + FIELD(AFR, UAF3, 2, 1) + FIELD(AFR, UAF2, 1, 1) + FIELD(AFR, UAF1, 0, 1) +REG32(AFMR1, 0x64) + FIELD(AFMR1, AMIDH, 21, 11) + FIELD(AFMR1, AMSRR, 20, 1) + FIELD(AFMR1, AMIDE, 19, 1) + FIELD(AFMR1, AMIDL, 1, 18) + FIELD(AFMR1, AMRTR, 0, 1) +REG32(AFIR1, 0x68) + FIELD(AFIR1, AIIDH, 21, 11) + FIELD(AFIR1, AISRR, 20, 1) + FIELD(AFIR1, AIIDE, 19, 1) + FIELD(AFIR1, AIIDL, 1, 18) + FIELD(AFIR1, AIRTR, 0, 1) +REG32(AFMR2, 0x6c) + FIELD(AFMR2, AMIDH, 21, 11) + FIELD(AFMR2, AMSRR, 20, 1) + FIELD(AFMR2, AMIDE, 19, 1) + FIELD(AFMR2, AMIDL, 1, 18) + FIELD(AFMR2, AMRTR, 0, 1) +REG32(AFIR2, 0x70) + FIELD(AFIR2, AIIDH, 21, 11) + FIELD(AFIR2, AISRR, 20, 1) + FIELD(AFIR2, AIIDE, 19, 1) + FIELD(AFIR2, AIIDL, 1, 18) + FIELD(AFIR2, AIRTR, 0, 1) +REG32(AFMR3, 0x74) + FIELD(AFMR3, AMIDH, 21, 11) + FIELD(AFMR3, AMSRR, 20, 1) + FIELD(AFMR3, AMIDE, 19, 1) + FIELD(AFMR3, AMIDL, 1, 18) + FIELD(AFMR3, AMRTR, 0, 1) +REG32(AFIR3, 0x78) + FIELD(AFIR3, AIIDH, 21, 11) + FIELD(AFIR3, AISRR, 20, 1) + FIELD(AFIR3, AIIDE, 19, 1) + FIELD(AFIR3, AIIDL, 1, 18) + FIELD(AFIR3, AIRTR, 0, 1) +REG32(AFMR4, 0x7c) + FIELD(AFMR4, AMIDH, 21, 11) + FIELD(AFMR4, AMSRR, 20, 1) + FIELD(AFMR4, AMIDE, 19, 1) + FIELD(AFMR4, AMIDL, 1, 18) + FIELD(AFMR4, AMRTR, 0, 1) +REG32(AFIR4, 0x80) + FIELD(AFIR4, AIIDH, 21, 11) + FIELD(AFIR4, AISRR, 20, 1) + FIELD(AFIR4, AIIDE, 19, 1) + FIELD(AFIR4, AIIDL, 1, 18) + FIELD(AFIR4, AIRTR, 0, 1) + +static void can_update_irq(XlnxZynqMPCANState *s) +{ + uint32_t irq; + + /* Watermark register interrupts. */ + if ((fifo32_num_free(&s->tx_fifo) / CAN_FRAME_SIZE) > + ARRAY_FIELD_EX32(s->regs, WIR, EW)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFWMEMP, 1); + } + + if ((fifo32_num_used(&s->rx_fifo) / CAN_FRAME_SIZE) > + ARRAY_FIELD_EX32(s->regs, WIR, FW)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXFWMFLL, 1); + } + + /* RX Interrupts. */ + if (fifo32_num_used(&s->rx_fifo) >= CAN_FRAME_SIZE) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXNEMP, 1); + } + + /* TX interrupts. */ + if (fifo32_is_empty(&s->tx_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFEMP, 1); + } + + if (fifo32_is_full(&s->tx_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFLL, 1); + } + + if (fifo32_is_full(&s->txhpb_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXBFLL, 1); + } + + irq = s->regs[R_INTERRUPT_STATUS_REGISTER]; + irq &= s->regs[R_INTERRUPT_ENABLE_REGISTER]; + + trace_xlnx_can_update_irq(s->regs[R_INTERRUPT_STATUS_REGISTER], + s->regs[R_INTERRUPT_ENABLE_REGISTER], irq); + qemu_set_irq(s->irq, irq); +} + +static void can_ier_post_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + can_update_irq(s); +} + +static uint64_t can_icr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + s->regs[R_INTERRUPT_STATUS_REGISTER] &= ~val; + can_update_irq(s); + + return 0; +} + +static void can_config_reset(XlnxZynqMPCANState *s) +{ + /* Reset all the configuration registers. */ + register_reset(&s->reg_info[R_SOFTWARE_RESET_REGISTER]); + register_reset(&s->reg_info[R_MODE_SELECT_REGISTER]); + register_reset( + &s->reg_info[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER]); + register_reset(&s->reg_info[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER]); + register_reset(&s->reg_info[R_STATUS_REGISTER]); + register_reset(&s->reg_info[R_INTERRUPT_STATUS_REGISTER]); + register_reset(&s->reg_info[R_INTERRUPT_ENABLE_REGISTER]); + register_reset(&s->reg_info[R_INTERRUPT_CLEAR_REGISTER]); + register_reset(&s->reg_info[R_WIR]); +} + +static void can_config_mode(XlnxZynqMPCANState *s) +{ + register_reset(&s->reg_info[R_ERROR_COUNTER_REGISTER]); + register_reset(&s->reg_info[R_ERROR_STATUS_REGISTER]); + + /* Put XlnxZynqMPCAN in configuration mode. */ + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 1); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, BSOFF, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ERROR, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ARBLST, 0); + + can_update_irq(s); +} + +static void update_status_register_mode_bits(XlnxZynqMPCANState *s) +{ + bool sleep_status = ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP); + bool sleep_mode = ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP); + /* Wake up interrupt bit. */ + bool wakeup_irq_val = sleep_status && (sleep_mode == 0); + /* Sleep interrupt bit. */ + bool sleep_irq_val = sleep_mode && (sleep_status == 0); + + /* Clear previous core mode status bits. */ + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 0); + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 0); + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 0); + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 0); + + /* set current mode bit and generate irqs accordingly. */ + if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, LBACK)) { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 1); + } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP)) { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 1); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP, + sleep_irq_val); + } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SNOOP)) { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 1); + } else { + /* + * If all bits are zero then XlnxZynqMPCAN is set in normal mode. + */ + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 1); + /* Set wakeup interrupt bit. */ + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP, + wakeup_irq_val); + } + + can_update_irq(s); +} + +static void can_exit_sleep_mode(XlnxZynqMPCANState *s) +{ + ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, 0); + update_status_register_mode_bits(s); +} + +static void generate_frame(qemu_can_frame *frame, uint32_t *data) +{ + frame->can_id = data[0]; + frame->can_dlc = FIELD_EX32(data[1], TXFIFO_DLC, DLC); + + frame->data[0] = FIELD_EX32(data[2], TXFIFO_DATA1, DB3); + frame->data[1] = FIELD_EX32(data[2], TXFIFO_DATA1, DB2); + frame->data[2] = FIELD_EX32(data[2], TXFIFO_DATA1, DB1); + frame->data[3] = FIELD_EX32(data[2], TXFIFO_DATA1, DB0); + + frame->data[4] = FIELD_EX32(data[3], TXFIFO_DATA2, DB7); + frame->data[5] = FIELD_EX32(data[3], TXFIFO_DATA2, DB6); + frame->data[6] = FIELD_EX32(data[3], TXFIFO_DATA2, DB5); + frame->data[7] = FIELD_EX32(data[3], TXFIFO_DATA2, DB4); +} + +static bool tx_ready_check(XlnxZynqMPCANState *s) +{ + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer data while" + " data while controller is in reset mode.\n", + path); + return false; + } + + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer" + " data while controller is in configuration mode. Reset" + " the core so operations can start fresh.\n", + path); + return false; + } + + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer" + " data while controller is in SNOOP MODE.\n", + path); + return false; + } + + return true; +} + +static void transfer_fifo(XlnxZynqMPCANState *s, Fifo32 *fifo) +{ + qemu_can_frame frame; + uint32_t data[CAN_FRAME_SIZE]; + int i; + bool can_tx = tx_ready_check(s); + + if (!can_tx) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Controller is not enabled for data" + " transfer.\n", path); + can_update_irq(s); + return; + } + + while (!fifo32_is_empty(fifo)) { + for (i = 0; i < CAN_FRAME_SIZE; i++) { + data[i] = fifo32_pop(fifo); + } + + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) { + /* + * Controller is in loopback. In Loopback mode, the CAN core + * transmits a recessive bitstream on to the XlnxZynqMPCAN Bus. + * Any message transmitted is looped back to the RX line and + * acknowledged. The XlnxZynqMPCAN core receives any message + * that it transmits. + */ + if (fifo32_is_full(&s->rx_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 1); + } else { + for (i = 0; i < CAN_FRAME_SIZE; i++) { + fifo32_push(&s->rx_fifo, data[i]); + } + + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 1); + } + } else { + /* Normal mode Tx. */ + generate_frame(&frame, data); + + trace_xlnx_can_tx_data(frame.can_id, frame.can_dlc, + frame.data[0], frame.data[1], + frame.data[2], frame.data[3], + frame.data[4], frame.data[5], + frame.data[6], frame.data[7]); + can_bus_client_send(&s->bus_client, &frame, 1); + } + } + + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 1); + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, TXBFLL, 0); + + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) { + can_exit_sleep_mode(s); + } + + can_update_irq(s); +} + +static uint64_t can_srr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + ARRAY_FIELD_DP32(s->regs, SOFTWARE_RESET_REGISTER, CEN, + FIELD_EX32(val, SOFTWARE_RESET_REGISTER, CEN)); + + if (FIELD_EX32(val, SOFTWARE_RESET_REGISTER, SRST)) { + trace_xlnx_can_reset(val); + + /* First, core will do software reset then will enter in config mode. */ + can_config_reset(s); + } + + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) { + can_config_mode(s); + } else { + /* + * Leave config mode. Now XlnxZynqMPCAN core will enter normal, + * sleep, snoop or loopback mode depending upon LBACK, SLEEP, SNOOP + * register states. + */ + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 0); + + ptimer_transaction_begin(s->can_timer); + ptimer_set_count(s->can_timer, 0); + ptimer_transaction_commit(s->can_timer); + + /* XlnxZynqMPCAN is out of config mode. It will send pending data. */ + transfer_fifo(s, &s->txhpb_fifo); + transfer_fifo(s, &s->tx_fifo); + } + + update_status_register_mode_bits(s); + + return s->regs[R_SOFTWARE_RESET_REGISTER]; +} + +static uint64_t can_msr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + uint8_t multi_mode; + + /* + * Multiple mode set check. This is done to make sure user doesn't set + * multiple modes. + */ + multi_mode = FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK) + + FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP) + + FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP); + + if (multi_mode > 1) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to config" + " several modes simultaneously. One mode will be selected" + " according to their priority: LBACK > SLEEP > SNOOP.\n", + path); + } + + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) { + /* We are in configuration mode, any mode can be selected. */ + s->regs[R_MODE_SELECT_REGISTER] = val; + } else { + bool sleep_mode_bit = FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP); + + ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, sleep_mode_bit); + + if (FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to set" + " LBACK mode without setting CEN bit as 0.\n", + path); + } else if (FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to set" + " SNOOP mode without setting CEN bit as 0.\n", + path); + } + + update_status_register_mode_bits(s); + } + + return s->regs[R_MODE_SELECT_REGISTER]; +} + +static uint64_t can_brpr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + /* Only allow writes when in config mode. */ + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) { + return s->regs[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER]; + } + + return val; +} + +static uint64_t can_btr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + /* Only allow writes when in config mode. */ + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) { + return s->regs[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER]; + } + + return val; +} + +static uint64_t can_tcr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + if (FIELD_EX32(val, TIMESTAMP_REGISTER, CTS)) { + ptimer_transaction_begin(s->can_timer); + ptimer_set_count(s->can_timer, 0); + ptimer_transaction_commit(s->can_timer); + } + + return 0; +} + +static void update_rx_fifo(XlnxZynqMPCANState *s, const qemu_can_frame *frame) +{ + bool filter_pass = false; + uint16_t timestamp = 0; + + /* If no filter is enabled. Message will be stored in FIFO. */ + if (!((ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) | + (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) | + (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) | + (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)))) { + filter_pass = true; + } + + /* + * Messages that pass any of the acceptance filters will be stored in + * the RX FIFO. + */ + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) { + uint32_t id_masked = s->regs[R_AFMR1] & frame->can_id; + uint32_t filter_id_masked = s->regs[R_AFMR1] & s->regs[R_AFIR1]; + + if (filter_id_masked == id_masked) { + filter_pass = true; + } + } + + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) { + uint32_t id_masked = s->regs[R_AFMR2] & frame->can_id; + uint32_t filter_id_masked = s->regs[R_AFMR2] & s->regs[R_AFIR2]; + + if (filter_id_masked == id_masked) { + filter_pass = true; + } + } + + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) { + uint32_t id_masked = s->regs[R_AFMR3] & frame->can_id; + uint32_t filter_id_masked = s->regs[R_AFMR3] & s->regs[R_AFIR3]; + + if (filter_id_masked == id_masked) { + filter_pass = true; + } + } + + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) { + uint32_t id_masked = s->regs[R_AFMR4] & frame->can_id; + uint32_t filter_id_masked = s->regs[R_AFMR4] & s->regs[R_AFIR4]; + + if (filter_id_masked == id_masked) { + filter_pass = true; + } + } + + if (!filter_pass) { + trace_xlnx_can_rx_fifo_filter_reject(frame->can_id, frame->can_dlc); + return; + } + + /* Store the message in fifo if it passed through any of the filters. */ + if (filter_pass && frame->can_dlc <= MAX_DLC) { + + if (fifo32_is_full(&s->rx_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 1); + } else { + timestamp = CAN_TIMER_MAX - ptimer_get_count(s->can_timer); + + fifo32_push(&s->rx_fifo, frame->can_id); + + fifo32_push(&s->rx_fifo, deposit32(0, R_RXFIFO_DLC_DLC_SHIFT, + R_RXFIFO_DLC_DLC_LENGTH, + frame->can_dlc) | + deposit32(0, R_RXFIFO_DLC_RXT_SHIFT, + R_RXFIFO_DLC_RXT_LENGTH, + timestamp)); + + /* First 32 bit of the data. */ + fifo32_push(&s->rx_fifo, deposit32(0, R_TXFIFO_DATA1_DB3_SHIFT, + R_TXFIFO_DATA1_DB3_LENGTH, + frame->data[0]) | + deposit32(0, R_TXFIFO_DATA1_DB2_SHIFT, + R_TXFIFO_DATA1_DB2_LENGTH, + frame->data[1]) | + deposit32(0, R_TXFIFO_DATA1_DB1_SHIFT, + R_TXFIFO_DATA1_DB1_LENGTH, + frame->data[2]) | + deposit32(0, R_TXFIFO_DATA1_DB0_SHIFT, + R_TXFIFO_DATA1_DB0_LENGTH, + frame->data[3])); + /* Last 32 bit of the data. */ + fifo32_push(&s->rx_fifo, deposit32(0, R_TXFIFO_DATA2_DB7_SHIFT, + R_TXFIFO_DATA2_DB7_LENGTH, + frame->data[4]) | + deposit32(0, R_TXFIFO_DATA2_DB6_SHIFT, + R_TXFIFO_DATA2_DB6_LENGTH, + frame->data[5]) | + deposit32(0, R_TXFIFO_DATA2_DB5_SHIFT, + R_TXFIFO_DATA2_DB5_LENGTH, + frame->data[6]) | + deposit32(0, R_TXFIFO_DATA2_DB4_SHIFT, + R_TXFIFO_DATA2_DB4_LENGTH, + frame->data[7])); + + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 1); + trace_xlnx_can_rx_data(frame->can_id, frame->can_dlc, + frame->data[0], frame->data[1], + frame->data[2], frame->data[3], + frame->data[4], frame->data[5], + frame->data[6], frame->data[7]); + } + + can_update_irq(s); + } +} + +static uint64_t can_rxfifo_pre_read(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + if (!fifo32_is_empty(&s->rx_fifo)) { + val = fifo32_pop(&s->rx_fifo); + } else { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXUFLW, 1); + } + + can_update_irq(s); + return val; +} + +static void can_filter_enable_post_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1) && + ARRAY_FIELD_EX32(s->regs, AFR, UAF2) && + ARRAY_FIELD_EX32(s->regs, AFR, UAF3) && + ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 1); + } else { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 0); + } +} + +static uint64_t can_filter_mask_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + uint32_t reg_idx = (reg->access->addr) / 4; + uint32_t filter_number = (reg_idx - R_AFMR1) / 2; + + /* modify an acceptance filter, the corresponding UAF bit should be '0'. */ + if (!(s->regs[R_AFR] & (1 << filter_number))) { + s->regs[reg_idx] = val; + + trace_xlnx_can_filter_mask_pre_write(filter_number, s->regs[reg_idx]); + } else { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Acceptance filter %d" + " mask is not set as corresponding UAF bit is not 0.\n", + path, filter_number + 1); + } + + return s->regs[reg_idx]; +} + +static uint64_t can_filter_id_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + uint32_t reg_idx = (reg->access->addr) / 4; + uint32_t filter_number = (reg_idx - R_AFIR1) / 2; + + if (!(s->regs[R_AFR] & (1 << filter_number))) { + s->regs[reg_idx] = val; + + trace_xlnx_can_filter_id_pre_write(filter_number, s->regs[reg_idx]); + } else { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Acceptance filter %d" + " id is not set as corresponding UAF bit is not 0.\n", + path, filter_number + 1); + } + + return s->regs[reg_idx]; +} + +static void can_tx_post_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + bool is_txhpb = reg->access->addr > A_TXFIFO_DATA2; + + bool initiate_transfer = (reg->access->addr == A_TXFIFO_DATA2) || + (reg->access->addr == A_TXHPB_DATA2); + + Fifo32 *f = is_txhpb ? &s->txhpb_fifo : &s->tx_fifo; + + if (!fifo32_is_full(f)) { + fifo32_push(f, val); + } else { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: TX FIFO is full.\n", path); + } + + /* Initiate the message send if TX register is written. */ + if (initiate_transfer && + ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) { + transfer_fifo(s, f); + } + + can_update_irq(s); +} + +static const RegisterAccessInfo can_regs_info[] = { + { .name = "SOFTWARE_RESET_REGISTER", + .addr = A_SOFTWARE_RESET_REGISTER, + .rsvd = 0xfffffffc, + .pre_write = can_srr_pre_write, + },{ .name = "MODE_SELECT_REGISTER", + .addr = A_MODE_SELECT_REGISTER, + .rsvd = 0xfffffff8, + .pre_write = can_msr_pre_write, + },{ .name = "ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER", + .addr = A_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, + .rsvd = 0xffffff00, + .pre_write = can_brpr_pre_write, + },{ .name = "ARBITRATION_PHASE_BIT_TIMING_REGISTER", + .addr = A_ARBITRATION_PHASE_BIT_TIMING_REGISTER, + .rsvd = 0xfffffe00, + .pre_write = can_btr_pre_write, + },{ .name = "ERROR_COUNTER_REGISTER", + .addr = A_ERROR_COUNTER_REGISTER, + .rsvd = 0xffff0000, + .ro = 0xffffffff, + },{ .name = "ERROR_STATUS_REGISTER", + .addr = A_ERROR_STATUS_REGISTER, + .rsvd = 0xffffffe0, + .w1c = 0x1f, + },{ .name = "STATUS_REGISTER", .addr = A_STATUS_REGISTER, + .reset = 0x1, + .rsvd = 0xffffe000, + .ro = 0x1fff, + },{ .name = "INTERRUPT_STATUS_REGISTER", + .addr = A_INTERRUPT_STATUS_REGISTER, + .reset = 0x6000, + .rsvd = 0xffff8000, + .ro = 0x7fff, + },{ .name = "INTERRUPT_ENABLE_REGISTER", + .addr = A_INTERRUPT_ENABLE_REGISTER, + .rsvd = 0xffff8000, + .post_write = can_ier_post_write, + },{ .name = "INTERRUPT_CLEAR_REGISTER", + .addr = A_INTERRUPT_CLEAR_REGISTER, + .rsvd = 0xffff8000, + .pre_write = can_icr_pre_write, + },{ .name = "TIMESTAMP_REGISTER", + .addr = A_TIMESTAMP_REGISTER, + .rsvd = 0xfffffffe, + .pre_write = can_tcr_pre_write, + },{ .name = "WIR", .addr = A_WIR, + .reset = 0x3f3f, + .rsvd = 0xffff0000, + },{ .name = "TXFIFO_ID", .addr = A_TXFIFO_ID, + .post_write = can_tx_post_write, + },{ .name = "TXFIFO_DLC", .addr = A_TXFIFO_DLC, + .rsvd = 0xfffffff, + .post_write = can_tx_post_write, + },{ .name = "TXFIFO_DATA1", .addr = A_TXFIFO_DATA1, + .post_write = can_tx_post_write, + },{ .name = "TXFIFO_DATA2", .addr = A_TXFIFO_DATA2, + .post_write = can_tx_post_write, + },{ .name = "TXHPB_ID", .addr = A_TXHPB_ID, + .post_write = can_tx_post_write, + },{ .name = "TXHPB_DLC", .addr = A_TXHPB_DLC, + .rsvd = 0xfffffff, + .post_write = can_tx_post_write, + },{ .name = "TXHPB_DATA1", .addr = A_TXHPB_DATA1, + .post_write = can_tx_post_write, + },{ .name = "TXHPB_DATA2", .addr = A_TXHPB_DATA2, + .post_write = can_tx_post_write, + },{ .name = "RXFIFO_ID", .addr = A_RXFIFO_ID, + .ro = 0xffffffff, + .post_read = can_rxfifo_pre_read, + },{ .name = "RXFIFO_DLC", .addr = A_RXFIFO_DLC, + .rsvd = 0xfff0000, + .post_read = can_rxfifo_pre_read, + },{ .name = "RXFIFO_DATA1", .addr = A_RXFIFO_DATA1, + .post_read = can_rxfifo_pre_read, + },{ .name = "RXFIFO_DATA2", .addr = A_RXFIFO_DATA2, + .post_read = can_rxfifo_pre_read, + },{ .name = "AFR", .addr = A_AFR, + .rsvd = 0xfffffff0, + .post_write = can_filter_enable_post_write, + },{ .name = "AFMR1", .addr = A_AFMR1, + .pre_write = can_filter_mask_pre_write, + },{ .name = "AFIR1", .addr = A_AFIR1, + .pre_write = can_filter_id_pre_write, + },{ .name = "AFMR2", .addr = A_AFMR2, + .pre_write = can_filter_mask_pre_write, + },{ .name = "AFIR2", .addr = A_AFIR2, + .pre_write = can_filter_id_pre_write, + },{ .name = "AFMR3", .addr = A_AFMR3, + .pre_write = can_filter_mask_pre_write, + },{ .name = "AFIR3", .addr = A_AFIR3, + .pre_write = can_filter_id_pre_write, + },{ .name = "AFMR4", .addr = A_AFMR4, + .pre_write = can_filter_mask_pre_write, + },{ .name = "AFIR4", .addr = A_AFIR4, + .pre_write = can_filter_id_pre_write, + } +}; + +static void xlnx_zynqmp_can_ptimer_cb(void *opaque) +{ + /* No action required on the timer rollover. */ +} + +static const MemoryRegionOps can_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void xlnx_zynqmp_can_reset_init(Object *obj, ResetType type) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); + unsigned int i; + + for (i = R_RXFIFO_ID; i < ARRAY_SIZE(s->reg_info); ++i) { + register_reset(&s->reg_info[i]); + } + + ptimer_transaction_begin(s->can_timer); + ptimer_set_count(s->can_timer, 0); + ptimer_transaction_commit(s->can_timer); +} + +static void xlnx_zynqmp_can_reset_hold(Object *obj) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); + unsigned int i; + + for (i = 0; i < R_RXFIFO_ID; ++i) { + register_reset(&s->reg_info[i]); + } + + /* + * Reset FIFOs when CAN model is reset. This will clear the fifo writes + * done by post_write which gets called from register_reset function, + * post_write handle will not be able to trigger tx because CAN will be + * disabled when software_reset_register is cleared first. + */ + fifo32_reset(&s->rx_fifo); + fifo32_reset(&s->tx_fifo); + fifo32_reset(&s->txhpb_fifo); +} + +static bool xlnx_zynqmp_can_can_receive(CanBusClientState *client) +{ + XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState, + bus_client); + + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Controller is in reset state.\n", + path); + return false; + } + + if ((ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) == 0) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Controller is disabled. Incoming" + " messages will be discarded.\n", path); + return false; + } + + return true; +} + +static ssize_t xlnx_zynqmp_can_receive(CanBusClientState *client, + const qemu_can_frame *buf, size_t buf_size) { + XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState, + bus_client); + const qemu_can_frame *frame = buf; + + if (buf_size <= 0) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Error in the data received.\n", + path); + return 0; + } + + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) { + /* Snoop Mode: Just keep the data. no response back. */ + update_rx_fifo(s, frame); + } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP))) { + /* + * XlnxZynqMPCAN is in sleep mode. Any data on bus will bring it to wake + * up state. + */ + can_exit_sleep_mode(s); + update_rx_fifo(s, frame); + } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) == 0) { + update_rx_fifo(s, frame); + } else { + /* + * XlnxZynqMPCAN will not participate in normal bus communication + * and will not receive any messages transmitted by other CAN nodes. + */ + trace_xlnx_can_rx_discard(s->regs[R_STATUS_REGISTER]); + } + + return 1; +} + +static CanBusClientInfo can_xilinx_bus_client_info = { + .can_receive = xlnx_zynqmp_can_can_receive, + .receive = xlnx_zynqmp_can_receive, +}; + +static int xlnx_zynqmp_can_connect_to_bus(XlnxZynqMPCANState *s, + CanBusState *bus) +{ + s->bus_client.info = &can_xilinx_bus_client_info; + + if (can_bus_insert_client(bus, &s->bus_client) < 0) { + return -1; + } + return 0; +} + +static void xlnx_zynqmp_can_realize(DeviceState *dev, Error **errp) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(dev); + + if (s->canbus) { + if (xlnx_zynqmp_can_connect_to_bus(s, s->canbus) < 0) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + error_setg(errp, "%s: xlnx_zynqmp_can_connect_to_bus" + " failed.", path); + return; + } + } + + /* Create RX FIFO, TXFIFO, TXHPB storage. */ + fifo32_create(&s->rx_fifo, RXFIFO_SIZE); + fifo32_create(&s->tx_fifo, RXFIFO_SIZE); + fifo32_create(&s->txhpb_fifo, CAN_FRAME_SIZE); + + /* Allocate a new timer. */ + s->can_timer = ptimer_init(xlnx_zynqmp_can_ptimer_cb, s, + PTIMER_POLICY_DEFAULT); + + ptimer_transaction_begin(s->can_timer); + + ptimer_set_freq(s->can_timer, s->cfg.ext_clk_freq); + ptimer_set_limit(s->can_timer, CAN_TIMER_MAX, 1); + ptimer_run(s->can_timer, 0); + ptimer_transaction_commit(s->can_timer); +} + +static void xlnx_zynqmp_can_init(Object *obj) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_CAN, + XLNX_ZYNQMP_CAN_R_MAX * 4); + reg_array = register_init_block32(DEVICE(obj), can_regs_info, + ARRAY_SIZE(can_regs_info), + s->reg_info, s->regs, + &can_ops, + XLNX_ZYNQMP_CAN_ERR_DEBUG, + XLNX_ZYNQMP_CAN_R_MAX * 4); + + memory_region_add_subregion(&s->iomem, 0x00, &reg_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); +} + +static const VMStateDescription vmstate_can = { + .name = TYPE_XLNX_ZYNQMP_CAN, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_FIFO32(rx_fifo, XlnxZynqMPCANState), + VMSTATE_FIFO32(tx_fifo, XlnxZynqMPCANState), + VMSTATE_FIFO32(txhpb_fifo, XlnxZynqMPCANState), + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPCANState, XLNX_ZYNQMP_CAN_R_MAX), + VMSTATE_PTIMER(can_timer, XlnxZynqMPCANState), + VMSTATE_END_OF_LIST(), + } +}; + +static Property xlnx_zynqmp_can_properties[] = { + DEFINE_PROP_UINT32("ext_clk_freq", XlnxZynqMPCANState, cfg.ext_clk_freq, + CAN_DEFAULT_CLOCK), + DEFINE_PROP_LINK("canbus", XlnxZynqMPCANState, canbus, TYPE_CAN_BUS, + CanBusState *), + DEFINE_PROP_END_OF_LIST(), +}; + +static void xlnx_zynqmp_can_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = xlnx_zynqmp_can_reset_init; + rc->phases.hold = xlnx_zynqmp_can_reset_hold; + dc->realize = xlnx_zynqmp_can_realize; + device_class_set_props(dc, xlnx_zynqmp_can_properties); + dc->vmsd = &vmstate_can; +} + +static const TypeInfo can_info = { + .name = TYPE_XLNX_ZYNQMP_CAN, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxZynqMPCANState), + .class_init = xlnx_zynqmp_can_class_init, + .instance_init = xlnx_zynqmp_can_init, +}; + +static void can_register_types(void) +{ + type_register_static(&can_info); +} + +type_init(can_register_types) diff --git a/hw/Kconfig b/hw/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/Kconfig +++ b/hw/Kconfig @@ -XXX,XX +XXX,XX @@ config XILINX_AXI config XLNX_ZYNQMP bool select REGISTER + select CAN_BUS diff --git a/hw/net/can/meson.build b/hw/net/can/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/can/meson.build +++ b/hw/net/can/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_pcm3680_pci.c')) softmmu_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_mioe3680_pci.c')) softmmu_ss.add(when: 'CONFIG_CAN_CTUCANFD', if_true: files('ctucan_core.c')) softmmu_ss.add(when: 'CONFIG_CAN_CTUCANFD_PCI', if_true: files('ctucan_pci.c')) +softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP', if_true: files('xlnx-zynqmp-can.c')) diff --git a/hw/net/can/trace-events b/hw/net/can/trace-events new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/can/trace-events @@ -XXX,XX +XXX,XX @@ +# xlnx-zynqmp-can.c +xlnx_can_update_irq(uint32_t isr, uint32_t ier, uint32_t irq) "ISR: 0x%08x IER: 0x%08x IRQ: 0x%08x" +xlnx_can_reset(uint32_t val) "Resetting controller with value = 0x%08x" +xlnx_can_rx_fifo_filter_reject(uint32_t id, uint8_t dlc) "Frame: ID: 0x%08x DLC: 0x%02x" +xlnx_can_filter_id_pre_write(uint8_t filter_num, uint32_t value) "Filter%d ID: 0x%08x" +xlnx_can_filter_mask_pre_write(uint8_t filter_num, uint32_t value) "Filter%d MASK: 0x%08x" +xlnx_can_tx_data(uint32_t id, uint8_t dlc, uint8_t db0, uint8_t db1, uint8_t db2, uint8_t db3, uint8_t db4, uint8_t db5, uint8_t db6, uint8_t db7) "Frame: ID: 0x%08x DLC: 0x%02x DATA: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x" +xlnx_can_rx_data(uint32_t id, uint32_t dlc, uint8_t db0, uint8_t db1, uint8_t db2, uint8_t db3, uint8_t db4, uint8_t db5, uint8_t db6, uint8_t db7) "Frame: ID: 0x%08x DLC: 0x%02x DATA: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x" +xlnx_can_rx_discard(uint32_t status) "Controller is not enabled for bus communication. Status Register: 0x%08x" -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> Connect CAN0 and CAN1 on the ZynqMP. Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-id: 1605728926-352690-3-git-send-email-fnu.vikram@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 8 ++++++++ hw/arm/xlnx-zcu102.c | 20 ++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 62 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gic.h" #include "hw/net/cadence_gem.h" #include "hw/char/cadence_uart.h" +#include "hw/net/xlnx-zynqmp-can.h" #include "hw/ide/ahci.h" #include "hw/sd/sdhci.h" #include "hw/ssi/xilinx_spips.h" @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/cluster.h" #include "target/arm/cpu.h" #include "qom/object.h" +#include "net/can_emu.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) #define XLNX_ZYNQMP_NUM_RPU_CPUS 2 #define XLNX_ZYNQMP_NUM_GEMS 4 #define XLNX_ZYNQMP_NUM_UARTS 2 +#define XLNX_ZYNQMP_NUM_CAN 2 +#define XLNX_ZYNQMP_CAN_REF_CLK (24 * 1000 * 1000) #define XLNX_ZYNQMP_NUM_SDHCI 2 #define XLNX_ZYNQMP_NUM_SPIS 2 #define XLNX_ZYNQMP_NUM_GDMA_CH 8 @@ -XXX,XX +XXX,XX @@ struct XlnxZynqMPState { CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS]; CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS]; + XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN]; SysbusAHCIState sata; SDHCIState sdhci[XLNX_ZYNQMP_NUM_SDHCI]; XilinxSPIPS spi[XLNX_ZYNQMP_NUM_SPIS]; @@ -XXX,XX +XXX,XX @@ struct XlnxZynqMPState { bool virt; /* Has the RPU subsystem? */ bool has_rpu; + + /* CAN bus. */ + CanBusState *canbus[XLNX_ZYNQMP_NUM_CAN]; }; #endif diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "sysemu/device_tree.h" #include "qom/object.h" +#include "net/can_emu.h" struct XlnxZCU102 { MachineState parent_obj; @@ -XXX,XX +XXX,XX @@ struct XlnxZCU102 { bool secure; bool virt; + CanBusState *canbus[XLNX_ZYNQMP_NUM_CAN]; + struct arm_boot_info binfo; }; @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_init(MachineState *machine) object_property_set_bool(OBJECT(&s->soc), "virtualization", s->virt, &error_fatal); + for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) { + gchar *bus_name = g_strdup_printf("canbus%d", i); + + object_property_set_link(OBJECT(&s->soc), bus_name, + OBJECT(s->canbus[i]), &error_fatal); + g_free(bus_name); + } + qdev_realize(DEVICE(&s->soc), NULL, &error_fatal); /* Create and plug in the SD cards */ @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; + object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + (Object **)&s->canbus[0], + object_property_allow_set_link, + 0); + + object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + (Object **)&s->canbus[1], + object_property_allow_set_link, + 0); } static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ static const int uart_intr[XLNX_ZYNQMP_NUM_UARTS] = { 21, 22, }; +static const uint64_t can_addr[XLNX_ZYNQMP_NUM_CAN] = { + 0xFF060000, 0xFF070000, +}; + +static const int can_intr[XLNX_ZYNQMP_NUM_CAN] = { + 23, 24, +}; + static const uint64_t sdhci_addr[XLNX_ZYNQMP_NUM_SDHCI] = { 0xFF160000, 0xFF170000, }; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(Object *obj) TYPE_CADENCE_UART); } + for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) { + object_initialize_child(obj, "can[*]", &s->can[i], + TYPE_XLNX_ZYNQMP_CAN); + } + object_initialize_child(obj, "sata", &s->sata, TYPE_SYSBUS_AHCI); for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) gic_spi[uart_intr[i]]); } + for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) { + object_property_set_int(OBJECT(&s->can[i]), "ext_clk_freq", + XLNX_ZYNQMP_CAN_REF_CLK, &error_abort); + + object_property_set_link(OBJECT(&s->can[i]), "canbus", + OBJECT(s->canbus[i]), &error_fatal); + + sysbus_realize(SYS_BUS_DEVICE(&s->can[i]), &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->can[i]), 0, can_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->can[i]), 0, + gic_spi[can_intr[i]]); + } + object_property_set_int(OBJECT(&s->sata), "num-ports", SATA_NUM_PORTS, &error_abort); if (!sysbus_realize(SYS_BUS_DEVICE(&s->sata), errp)) { @@ -XXX,XX +XXX,XX @@ static Property xlnx_zynqmp_props[] = { DEFINE_PROP_BOOL("has_rpu", XlnxZynqMPState, has_rpu, false), DEFINE_PROP_LINK("ddr-ram", XlnxZynqMPState, ddr_ram, TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_LINK("canbus0", XlnxZynqMPState, canbus[0], TYPE_CAN_BUS, + CanBusState *), + DEFINE_PROP_LINK("canbus1", XlnxZynqMPState, canbus[1], TYPE_CAN_BUS, + CanBusState *), DEFINE_PROP_END_OF_LIST() }; -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> The QTests perform five tests on the Xilinx ZynqMP CAN controller: Tests the CAN controller in loopback, sleep and snoop mode. Tests filtering of incoming CAN messages. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-id: 1605728926-352690-4-git-send-email-fnu.vikram@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/xlnx-can-test.c | 360 ++++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 361 insertions(+) create mode 100644 tests/qtest/xlnx-can-test.c diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for the Xilinx ZynqMP CAN controller. + * + * Copyright (c) 2020 Xilinx Inc. + * + * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" + +/* Base address. */ +#define CAN0_BASE_ADDR 0xFF060000 +#define CAN1_BASE_ADDR 0xFF070000 + +/* Register addresses. */ +#define R_SRR_OFFSET 0x00 +#define R_MSR_OFFSET 0x04 +#define R_SR_OFFSET 0x18 +#define R_ISR_OFFSET 0x1C +#define R_ICR_OFFSET 0x24 +#define R_TXID_OFFSET 0x30 +#define R_TXDLC_OFFSET 0x34 +#define R_TXDATA1_OFFSET 0x38 +#define R_TXDATA2_OFFSET 0x3C +#define R_RXID_OFFSET 0x50 +#define R_RXDLC_OFFSET 0x54 +#define R_RXDATA1_OFFSET 0x58 +#define R_RXDATA2_OFFSET 0x5C +#define R_AFR 0x60 +#define R_AFMR1 0x64 +#define R_AFIR1 0x68 +#define R_AFMR2 0x6C +#define R_AFIR2 0x70 +#define R_AFMR3 0x74 +#define R_AFIR3 0x78 +#define R_AFMR4 0x7C +#define R_AFIR4 0x80 + +/* CAN modes. */ +#define CONFIG_MODE 0x00 +#define NORMAL_MODE 0x00 +#define LOOPBACK_MODE 0x02 +#define SNOOP_MODE 0x04 +#define SLEEP_MODE 0x01 +#define ENABLE_CAN (1 << 1) +#define STATUS_NORMAL_MODE (1 << 3) +#define STATUS_LOOPBACK_MODE (1 << 1) +#define STATUS_SNOOP_MODE (1 << 12) +#define STATUS_SLEEP_MODE (1 << 2) +#define ISR_TXOK (1 << 1) +#define ISR_RXOK (1 << 4) + +static void match_rx_tx_data(const uint32_t *buf_tx, const uint32_t *buf_rx, + uint8_t can_timestamp) +{ + uint16_t size = 0; + uint8_t len = 4; + + while (size < len) { + if (R_RXID_OFFSET + 4 * size == R_RXDLC_OFFSET) { + g_assert_cmpint(buf_rx[size], ==, buf_tx[size] + can_timestamp); + } else { + g_assert_cmpint(buf_rx[size], ==, buf_tx[size]); + } + + size++; + } +} + +static void read_data(QTestState *qts, uint64_t can_base_addr, uint32_t *buf_rx) +{ + uint32_t int_status; + + /* Read the interrupt on CAN rx. */ + int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_RXOK; + + g_assert_cmpint(int_status, ==, ISR_RXOK); + + /* Read the RX register data for CAN. */ + buf_rx[0] = qtest_readl(qts, can_base_addr + R_RXID_OFFSET); + buf_rx[1] = qtest_readl(qts, can_base_addr + R_RXDLC_OFFSET); + buf_rx[2] = qtest_readl(qts, can_base_addr + R_RXDATA1_OFFSET); + buf_rx[3] = qtest_readl(qts, can_base_addr + R_RXDATA2_OFFSET); + + /* Clear the RX interrupt. */ + qtest_writel(qts, CAN1_BASE_ADDR + R_ICR_OFFSET, ISR_RXOK); +} + +static void send_data(QTestState *qts, uint64_t can_base_addr, + const uint32_t *buf_tx) +{ + uint32_t int_status; + + /* Write the TX register data for CAN. */ + qtest_writel(qts, can_base_addr + R_TXID_OFFSET, buf_tx[0]); + qtest_writel(qts, can_base_addr + R_TXDLC_OFFSET, buf_tx[1]); + qtest_writel(qts, can_base_addr + R_TXDATA1_OFFSET, buf_tx[2]); + qtest_writel(qts, can_base_addr + R_TXDATA2_OFFSET, buf_tx[3]); + + /* Read the interrupt on CAN for tx. */ + int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_TXOK; + + g_assert_cmpint(int_status, ==, ISR_TXOK); + + /* Clear the interrupt for tx. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_ICR_OFFSET, ISR_TXOK); +} + +/* + * This test will be transferring data from CAN0 and CAN1 through canbus. CAN0 + * initiate the data transfer to can-bus, CAN1 receives the data. Test compares + * the data sent from CAN0 with received on CAN1. + */ +static void test_can_bus(void) +{ + const uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + uint8_t can_timestamp = 1; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0 and CAN1. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + + /* Check here if CAN0 and CAN1 are in normal mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + send_data(qts, CAN0_BASE_ADDR, buf_tx); + + read_data(qts, CAN1_BASE_ADDR, buf_rx); + match_rx_tx_data(buf_tx, buf_rx, can_timestamp); + + qtest_quit(qts); +} + +/* + * This test is performing loopback mode on CAN0 and CAN1. Data sent from TX of + * each CAN0 and CAN1 are compared with RX register data for respective CAN. + */ +static void test_can_loopback(void) +{ + uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0 in loopback mode. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + + /* Check here if CAN0 is set in loopback mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + + g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE); + + send_data(qts, CAN0_BASE_ADDR, buf_tx); + read_data(qts, CAN0_BASE_ADDR, buf_rx); + match_rx_tx_data(buf_tx, buf_rx, 0); + + /* Configure the CAN1 in loopback mode. */ + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE); + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + + /* Check here if CAN1 is set in loopback mode. */ + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + + g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE); + + send_data(qts, CAN1_BASE_ADDR, buf_tx); + read_data(qts, CAN1_BASE_ADDR, buf_rx); + match_rx_tx_data(buf_tx, buf_rx, 0); + + qtest_quit(qts); +} + +/* + * Enable filters for CAN1. This will filter incoming messages with ID. In this + * test message will pass through filter 2. + */ +static void test_can_filter(void) +{ + uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + uint8_t can_timestamp = 1; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0 and CAN1. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + + /* Check here if CAN0 and CAN1 are in normal mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + /* Set filter for CAN1 for incoming messages. */ + qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0x0); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR1, 0xF7); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR1, 0x121F); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR2, 0x5431); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR2, 0x14); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR3, 0x1234); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR3, 0x5431); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR4, 0xFFF); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR4, 0x1234); + + qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0xF); + + send_data(qts, CAN0_BASE_ADDR, buf_tx); + + read_data(qts, CAN1_BASE_ADDR, buf_rx); + match_rx_tx_data(buf_tx, buf_rx, can_timestamp); + + qtest_quit(qts); +} + +/* Testing sleep mode on CAN0 while CAN1 is in normal mode. */ +static void test_can_sleepmode(void) +{ + uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + uint8_t can_timestamp = 1; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SLEEP_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + + /* Check here if CAN0 is in SLEEP mode and CAN1 in normal mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_SLEEP_MODE); + + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + send_data(qts, CAN1_BASE_ADDR, buf_tx); + + /* + * Once CAN1 sends data on can-bus. CAN0 should exit sleep mode. + * Check the CAN0 status now. It should exit the sleep mode and receive the + * incoming data. + */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + read_data(qts, CAN0_BASE_ADDR, buf_rx); + + match_rx_tx_data(buf_tx, buf_rx, can_timestamp); + + qtest_quit(qts); +} + +/* Testing Snoop mode on CAN0 while CAN1 is in normal mode. */ +static void test_can_snoopmode(void) +{ + uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + uint8_t can_timestamp = 1; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SNOOP_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + + /* Check here if CAN0 is in SNOOP mode and CAN1 in normal mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_SNOOP_MODE); + + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + send_data(qts, CAN1_BASE_ADDR, buf_tx); + + read_data(qts, CAN0_BASE_ADDR, buf_rx); + + match_rx_tx_data(buf_tx, buf_rx, can_timestamp); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/net/can/can_bus", test_can_bus); + qtest_add_func("/net/can/can_loopback", test_can_loopback); + qtest_add_func("/net/can/can_filter", test_can_filter); + qtest_add_func("/net/can/can_test_snoopmode", test_can_snoopmode); + qtest_add_func("/net/can/can_test_sleepmode", test_can_sleepmode); + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \ ['arm-cpu-features', 'numa-test', 'boot-serial-test', + 'xlnx-can-test', 'migration-test'] qtests_s390x = \ -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-id: 1605728926-352690-5-git-send-email-fnu.vikram@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/net/opencores_eth.c Devices ------- +Xilinx CAN +M: Vikram Garhwal <fnu.vikram@xilinx.com> +M: Francisco Iglesias <francisco.iglesias@xilinx.com> +S: Maintained +F: hw/net/can/xlnx-* +F: include/hw/net/xlnx-* +F: tests/qtest/xlnx-can-test* + EDU M: Jiri Slaby <jslaby@suse.cz> S: Maintained -- 2.20.1 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Trusted Firmware now supports A72 on sbsa-ref by default [1] so enable it for QEMU as well. A53 was already enabled there. 1. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7117 Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201120141705.246690-1-marcin.juszkiewicz@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { [SBSA_GWDT] = 16, }; +static const char * const valid_cpus[] = { + ARM_CPU_TYPE_NAME("cortex-a53"), + ARM_CPU_TYPE_NAME("cortex-a57"), + ARM_CPU_TYPE_NAME("cortex-a72"), +}; + +static bool cpu_type_valid(const char *cpu) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(valid_cpus); i++) { + if (strcmp(cpu, valid_cpus[i]) == 0) { + return true; + } + } + return false; +} + static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx) { uint8_t clustersz = ARM_DEFAULT_CPUS_PER_CLUSTER; @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) const CPUArchIdList *possible_cpus; int n, sbsa_max_cpus; - if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) { - error_report("sbsa-ref: CPU type other than the built-in " - "cortex-a57 not supported"); + if (!cpu_type_valid(machine->cpu_type)) { + error_report("mach-virt: CPU type %s not supported", machine->cpu_type); exit(1); } -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> Dump the collected random data after a randomness test failure. Note that this relies on the test having called g_test_set_nonfatal_assertions() so we don't abort immediately on the assertion failure. Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: minor commit message tweak] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_rng-test.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/tests/qtest/npcm7xx_rng-test.c b/tests/qtest/npcm7xx_rng-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_rng-test.c +++ b/tests/qtest/npcm7xx_rng-test.c @@ -XXX,XX +XXX,XX @@ #include "libqtest-single.h" #include "qemu/bitops.h" +#include "qemu-common.h" #define RNG_BASE_ADDR 0xf000b000 @@ -XXX,XX +XXX,XX @@ /* Number of bits to collect for randomness tests. */ #define TEST_INPUT_BITS (128) +static void dump_buf_if_failed(const uint8_t *buf, size_t size) +{ + if (g_test_failed()) { + qemu_hexdump(stderr, "", buf, size); + } +} + static void rng_writeb(unsigned int offset, uint8_t value) { writeb(RNG_BASE_ADDR + offset, value); @@ -XXX,XX +XXX,XX @@ static void test_continuous_monobit(void) } g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); + dump_buf_if_failed(buf, sizeof(buf)); } /* @@ -XXX,XX +XXX,XX @@ static void test_continuous_runs(void) } g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); + dump_buf_if_failed(buf.c, sizeof(buf)); } /* @@ -XXX,XX +XXX,XX @@ static void test_first_byte_monobit(void) } g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); + dump_buf_if_failed(buf, sizeof(buf)); } /* @@ -XXX,XX +XXX,XX @@ static void test_first_byte_runs(void) } g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); + dump_buf_if_failed(buf.c, sizeof(buf)); } int main(int argc, char **argv) -- 2.20.1 From: Alex Chen <alex.chen@huawei.com> We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201126111109.112238-2-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx25_ccm.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/hw/misc/imx25_ccm.c b/hw/misc/imx25_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx25_ccm.c +++ b/hw/misc/imx25_ccm.c @@ -XXX,XX +XXX,XX @@ static const char *imx25_ccm_reg_name(uint32_t reg) case IMX25_CCM_LPIMR1_REG: return "lpimr1"; default: - sprintf(unknown, "[%d ?]", reg); + sprintf(unknown, "[%u ?]", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_mpll_clk(IMXCCMState *dev) freq = imx_ccm_calc_pll(s->reg[IMX25_CCM_MPCTL_REG], CKIH_FREQ); } - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_mcu_clk(IMXCCMState *dev) freq = freq / (1 + EXTRACT(s->reg[IMX25_CCM_CCTL_REG], ARM_CLK_DIV)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_ahb_clk(IMXCCMState *dev) freq = imx25_ccm_get_mcu_clk(dev) / (1 + EXTRACT(s->reg[IMX25_CCM_CCTL_REG], AHB_CLK_DIV)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_ipg_clk(IMXCCMState *dev) freq = imx25_ccm_get_ahb_clk(dev) / 2; - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) break; } - DPRINTF("Clock = %d) = %d\n", clock, freq); + DPRINTF("Clock = %d) = %u\n", clock, freq); return freq; } -- 2.20.1 From: Alex Chen <alex.chen@huawei.com> We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201126111109.112238-3-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx31_ccm.c | 14 +++++++------- hw/misc/imx_ccm.c | 4 ++-- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/misc/imx31_ccm.c b/hw/misc/imx31_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx31_ccm.c +++ b/hw/misc/imx31_ccm.c @@ -XXX,XX +XXX,XX @@ static const char *imx31_ccm_reg_name(uint32_t reg) case IMX31_CCM_PDR2_REG: return "PDR2"; default: - sprintf(unknown, "[%d ?]", reg); + sprintf(unknown, "[%u ?]", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_pll_ref_clk(IMXCCMState *dev) freq = CKIH_FREQ; } - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_mpll_clk(IMXCCMState *dev) freq = imx_ccm_calc_pll(s->reg[IMX31_CCM_MPCTL_REG], imx31_ccm_get_pll_ref_clk(dev)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_mcu_main_clk(IMXCCMState *dev) freq = imx31_ccm_get_mpll_clk(dev); } - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_hclk_clk(IMXCCMState *dev) freq = imx31_ccm_get_mcu_main_clk(dev) / (1 + EXTRACT(s->reg[IMX31_CCM_PDR0_REG], MAX)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_ipg_clk(IMXCCMState *dev) freq = imx31_ccm_get_hclk_clk(dev) / (1 + EXTRACT(s->reg[IMX31_CCM_PDR0_REG], IPG)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) break; } - DPRINTF("Clock = %d) = %d\n", clock, freq); + DPRINTF("Clock = %d) = %u\n", clock, freq); return freq; } diff --git a/hw/misc/imx_ccm.c b/hw/misc/imx_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx_ccm.c +++ b/hw/misc/imx_ccm.c @@ -XXX,XX +XXX,XX @@ uint32_t imx_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) freq = klass->get_clock_frequency(dev, clock); } - DPRINTF("(clock = %d) = %d\n", clock, freq); + DPRINTF("(clock = %d) = %u\n", clock, freq); return freq; } @@ -XXX,XX +XXX,XX @@ uint32_t imx_ccm_calc_pll(uint32_t pllreg, uint32_t base_freq) freq = ((2 * (base_freq >> 10) * (mfi * mfd + mfn)) / (mfd * pd)) << 10; - DPRINTF("(pllreg = 0x%08x, base_freq = %d) = %d\n", pllreg, base_freq, + DPRINTF("(pllreg = 0x%08x, base_freq = %u) = %d\n", pllreg, base_freq, freq); return freq; -- 2.20.1 From: Alex Chen <alex.chen@huawei.com> We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201126111109.112238-4-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 20 ++++++++++---------- hw/misc/imx6_src.c | 2 +- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static const char *imx6_ccm_reg_name(uint32_t reg) case CCM_CMEOR: return "CMEOR"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static const char *imx6_analog_reg_name(uint32_t reg) case USB_ANALOG_DIGPROG: return "USB_ANALOG_DIGPROG"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_analog_get_pll2_clk(IMX6CCMState *dev) freq *= 20; } - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_analog_get_pll2_pfd0_clk(IMX6CCMState *dev) freq = imx6_analog_get_pll2_clk(dev) * 18 / EXTRACT(dev->analog[CCM_ANALOG_PFD_528], PFD0_FRAC); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_analog_get_pll2_pfd2_clk(IMX6CCMState *dev) freq = imx6_analog_get_pll2_clk(dev) * 18 / EXTRACT(dev->analog[CCM_ANALOG_PFD_528], PFD2_FRAC); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_analog_get_periph_clk(IMX6CCMState *dev) break; } - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_ccm_get_ahb_clk(IMX6CCMState *dev) freq = imx6_analog_get_periph_clk(dev) / (1 + EXTRACT(dev->ccm[CCM_CBCDR], AHB_PODF)); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_ccm_get_ipg_clk(IMX6CCMState *dev) freq = imx6_ccm_get_ahb_clk(dev) / (1 + EXTRACT(dev->ccm[CCM_CBCDR], IPG_PODF)); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_ccm_get_per_clk(IMX6CCMState *dev) freq = imx6_ccm_get_ipg_clk(dev) / (1 + EXTRACT(dev->ccm[CCM_CSCMR1], PERCLK_PODF)); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx6_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) break; } - DPRINTF("Clock = %d) = %d\n", clock, freq); + DPRINTF("Clock = %d) = %u\n", clock, freq); return freq; } diff --git a/hw/misc/imx6_src.c b/hw/misc/imx6_src.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_src.c +++ b/hw/misc/imx6_src.c @@ -XXX,XX +XXX,XX @@ static const char *imx6_src_reg_name(uint32_t reg) case SRC_GPR10: return "SRC_GPR10"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } -- 2.20.1 From: Alex Chen <alex.chen@huawei.com> We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201126111109.112238-5-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6ul_ccm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6ul_ccm.c +++ b/hw/misc/imx6ul_ccm.c @@ -XXX,XX +XXX,XX @@ static const char *imx6ul_ccm_reg_name(uint32_t reg) case CCM_CMEOR: return "CMEOR"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static const char *imx6ul_analog_reg_name(uint32_t reg) case USB_ANALOG_DIGPROG: return "USB_ANALOG_DIGPROG"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } -- 2.20.1 For M-profile CPUs, the range from 0xe0000000 to 0xe00fffff is the Private Peripheral Bus range, which includes all of the memory mapped devices and registers that are part of the CPU itself, including the NVIC, systick timer, and debug and trace components like the Data Watchpoint and Trace unit (DWT). Within this large region, the range 0xe000e000 to 0xe000efff is the System Control Space (NVIC, system registers, systick) and 0xe002e000 to 0exe002efff is its Non-secure alias. The architecture is clear that within the SCS unimplemented registers should be RES0 for privileged accesses and generate BusFault for unprivileged accesses, and we currently implement this. It is less clear about how to handle accesses to unimplemented regions of the wider PPB. Unprivileged accesses should definitely cause BusFaults (R_DQQS), but the behaviour of privileged accesses is not given as a general rule. However, the register definitions of individual registers for components like the DWT all state that they are RES0 if the relevant component is not implemented, so the simplest way to provide that is to provide RAZ/WI for the whole range for privileged accesses. (The v7M Arm ARM does say that reserved registers should be UNK/SBZP.) Expand the container MemoryRegion that the NVIC exposes so that it covers the whole PPB space. This means: * moving the address that the ARMV7M device maps it to down by 0xe000 bytes * moving the off and the offsets within the container of all the subregions forward by 0xe000 bytes * adding a new default MemoryRegion that covers the whole container at a lower priority than anything else and which provides the RAZWI/BusFault behaviour Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-2-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 1 + hw/arm/armv7m.c | 2 +- hw/intc/armv7m_nvic.c | 78 ++++++++++++++++++++++++++++++----- 3 files changed, 69 insertions(+), 12 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { MemoryRegion systickmem; MemoryRegion systick_ns_mem; MemoryRegion container; + MemoryRegion defaultmem; uint32_t num_irq; qemu_irq excpout; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); - memory_region_add_subregion(&s->container, 0xe000e000, + memory_region_add_subregion(&s->container, 0xe0000000, sysbus_mmio_get_region(sbd, 0)); for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps nvic_systick_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; +/* + * Unassigned portions of the PPB space are RAZ/WI for privileged + * accesses, and fault for non-privileged accesses. + */ +static MemTxResult ppb_default_read(void *opaque, hwaddr addr, + uint64_t *data, unsigned size, + MemTxAttrs attrs) +{ + qemu_log_mask(LOG_UNIMP, "Read of unassigned area of PPB: offset 0x%x\n", + (uint32_t)addr); + if (attrs.user) { + return MEMTX_ERROR; + } + *data = 0; + return MEMTX_OK; +} + +static MemTxResult ppb_default_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size, + MemTxAttrs attrs) +{ + qemu_log_mask(LOG_UNIMP, "Write of unassigned area of PPB: offset 0x%x\n", + (uint32_t)addr); + if (attrs.user) { + return MEMTX_ERROR; + } + return MEMTX_OK; +} + +static const MemoryRegionOps ppb_default_ops = { + .read_with_attrs = ppb_default_read, + .write_with_attrs = ppb_default_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 8, +}; + static int nvic_post_load(void *opaque, int version_id) { NVICState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void nvic_systick_trigger(void *opaque, int n, int level) static void armv7m_nvic_realize(DeviceState *dev, Error **errp) { NVICState *s = NVIC(dev); - int regionlen; /* The armv7m container object will have set our CPU pointer */ if (!s->cpu || !arm_feature(&s->cpu->env, ARM_FEATURE_M)) { @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) M_REG_S)); } - /* The NVIC and System Control Space (SCS) starts at 0xe000e000 + /* + * This device provides a single sysbus memory region which + * represents the whole of the "System PPB" space. This is the + * range from 0xe0000000 to 0xe00fffff and includes the NVIC, + * the System Control Space (system registers), the systick timer, + * and for CPUs with the Security extension an NS banked version + * of all of these. + * + * The default behaviour for unimplemented registers/ranges + * (for instance the Data Watchpoint and Trace unit at 0xe0001000) + * is to RAZ/WI for privileged access and BusFault for non-privileged + * access. + * + * The NVIC and System Control Space (SCS) starts at 0xe000e000 * and looks like this: * 0x004 - ICTR * 0x010 - 0xff - systick @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) * generally code determining which banked register to use should * use attrs.secure; code determining actual behaviour of the system * should use env->v7m.secure. + * + * The container covers the whole PPB space. Within it the priority + * of overlapping regions is: + * - default region (for RAZ/WI and BusFault) : -1 + * - system register regions : 0 + * - systick : 1 + * This is because the systick device is a small block of registers + * in the middle of the other system control registers. */ - regionlen = arm_feature(&s->cpu->env, ARM_FEATURE_V8) ? 0x21000 : 0x1000; - memory_region_init(&s->container, OBJECT(s), "nvic", regionlen); - /* The system register region goes at the bottom of the priority - * stack as it covers the whole page. - */ + memory_region_init(&s->container, OBJECT(s), "nvic", 0x100000); + memory_region_init_io(&s->defaultmem, OBJECT(s), &ppb_default_ops, s, + "nvic-default", 0x100000); + memory_region_add_subregion_overlap(&s->container, 0, &s->defaultmem, -1); memory_region_init_io(&s->sysregmem, OBJECT(s), &nvic_sysreg_ops, s, "nvic_sysregs", 0x1000); - memory_region_add_subregion(&s->container, 0, &s->sysregmem); + memory_region_add_subregion(&s->container, 0xe000, &s->sysregmem); memory_region_init_io(&s->systickmem, OBJECT(s), &nvic_systick_ops, s, "nvic_systick", 0xe0); - memory_region_add_subregion_overlap(&s->container, 0x10, + memory_region_add_subregion_overlap(&s->container, 0xe010, &s->systickmem, 1); if (arm_feature(&s->cpu->env, ARM_FEATURE_V8)) { memory_region_init_io(&s->sysreg_ns_mem, OBJECT(s), &nvic_sysreg_ns_ops, &s->sysregmem, "nvic_sysregs_ns", 0x1000); - memory_region_add_subregion(&s->container, 0x20000, &s->sysreg_ns_mem); + memory_region_add_subregion(&s->container, 0x2e000, &s->sysreg_ns_mem); memory_region_init_io(&s->systick_ns_mem, OBJECT(s), &nvic_sysreg_ns_ops, &s->systickmem, "nvic_systick_ns", 0xe0); - memory_region_add_subregion_overlap(&s->container, 0x20010, + memory_region_add_subregion_overlap(&s->container, 0x2e010, &s->systick_ns_mem, 1); } -- 2.20.1 In v8.1M the PXN architecture extension adds a new PXN bit to the MPU_RLAR registers, which forbids execution of code in the region from a privileged mode. This is another feature which is just in the generic "in v8.1M" set and has no ID register field indicating its presence. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-3-peter.maydell@linaro.org --- target/arm/helper.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } else { uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2); uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1); + bool pxn = false; + + if (arm_feature(env, ARM_FEATURE_V8_1M)) { + pxn = extract32(env->pmsav8.rlar[secure][matchregion], 4, 1); + } if (m_is_system_region(env, address)) { /* System space is always execute never */ @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } *prot = simple_ap_to_rw_prot(env, mmu_idx, ap); - if (*prot && !xn) { + if (*prot && !xn && !(pxn && !is_user)) { *prot |= PAGE_EXEC; } /* We don't need to look the attribute up in the MAIR0/MAIR1 -- 2.20.1 In arm_cpu_realizefn() we check whether the board code disabled EL3 via the has_el3 CPU object property, which we create if the CPU starts with the ARM_FEATURE_EL3 feature bit. If it is disabled, then we turn off ARM_FEATURE_EL3 and also zero out the relevant fields in the ID_PFR1 and ID_AA64PFR0 registers. This codepath was incorrectly being taken for M-profile CPUs, which do not have an EL3 and don't set ARM_FEATURE_EL3, but which may have the M-profile Security extension and so should have non-zero values in the ID_PFR1.Security field. Restrict the handling of the feature flag to A/R-profile cores. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-4-peter.maydell@linaro.org --- target/arm/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } } - if (!cpu->has_el3) { + if (!arm_feature(env, ARM_FEATURE_M) && !cpu->has_el3) { /* If the has_el3 CPU property is disabled then we need to disable the * feature. */ -- 2.20.1 Implement the v8.1M VSCCLRM insn, which zeros floating point registers if there is an active floating point context. This requires support in write_neon_element32() for the MO_32 element size, so add it. Because we want to use arm_gen_condlabel(), we need to move the definition of that function up in translate.c so it is before the #include of translate-vfp.c.inc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-5-peter.maydell@linaro.org --- target/arm/cpu.h | 9 ++++ target/arm/m-nocp.decode | 8 +++- target/arm/translate.c | 21 +++++---- target/arm/translate-vfp.c.inc | 84 ++++++++++++++++++++++++++++++++++ 4 files changed, 111 insertions(+), 11 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_mprofile(const ARMISARegisters *id) return FIELD_EX32(id->id_pfr1, ID_PFR1, MPROGMOD) != 0; } +static inline bool isar_feature_aa32_m_sec_state(const ARMISARegisters *id) +{ + /* + * Return true if M-profile state handling insns + * (VSCCLRM, CLRM, FPCTX access insns) are implemented + */ + return FIELD_EX32(id->id_pfr1, ID_PFR1, SECURITY) >= 3; +} + static inline bool isar_feature_aa32_fp16_arith(const ARMISARegisters *id) { /* Sadly this is encoded differently for A-profile and M-profile */ diff --git a/target/arm/m-nocp.decode b/target/arm/m-nocp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m-nocp.decode +++ b/target/arm/m-nocp.decode @@ -XXX,XX +XXX,XX @@ # If the coprocessor is not present or disabled then we will generate # the NOCP exception; otherwise we let the insn through to the main decode. +%vd_dp 22:1 12:4 +%vd_sp 12:4 22:1 + &nocp cp { # Special cases which do not take an early NOCP: VLLDM and VLSTM VLLDM_VLSTM 1110 1100 001 l:1 rn:4 0000 1010 0000 0000 - # TODO: VSCCLRM (new in v8.1M) is similar: - #VSCCLRM 1110 1100 1-01 1111 ---- 1011 ---- ---0 + # VSCCLRM (new in v8.1M) is similar: + VSCCLRM 1110 1100 1.01 1111 .... 1011 imm:7 0 vd=%vd_dp size=3 + VSCCLRM 1110 1100 1.01 1111 .... 1010 imm:8 vd=%vd_sp size=2 NOCP 111- 1110 ---- ---- ---- cp:4 ---- ---- &nocp NOCP 111- 110- ---- ---- ---- cp:4 ---- ---- &nocp diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ void arm_translate_init(void) a64_translate_init(); } +/* Generate a label used for skipping this instruction */ +static void arm_gen_condlabel(DisasContext *s) +{ + if (!s->condjmp) { + s->condlabel = gen_new_label(); + s->condjmp = 1; + } +} + /* Flags for the disas_set_da_iss info argument: * lower bits hold the Rt register number, higher bits are flags. */ @@ -XXX,XX +XXX,XX @@ static void write_neon_element64(TCGv_i64 src, int reg, int ele, MemOp memop) long off = neon_element_offset(reg, ele, memop); switch (memop) { + case MO_32: + tcg_gen_st32_i64(src, cpu_env, off); + break; case MO_64: tcg_gen_st_i64(src, cpu_env, off); break; @@ -XXX,XX +XXX,XX @@ static void gen_srs(DisasContext *s, s->base.is_jmp = DISAS_UPDATE_EXIT; } -/* Generate a label used for skipping this instruction */ -static void arm_gen_condlabel(DisasContext *s) -{ - if (!s->condjmp) { - s->condlabel = gen_new_label(); - s->condjmp = 1; - } -} - /* Skip this instruction if the ARM condition is false */ static void arm_skip_unless(DisasContext *s, uint32_t cond) { diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLLDM_VLSTM(DisasContext *s, arg_VLLDM_VLSTM *a) return true; } +static bool trans_VSCCLRM(DisasContext *s, arg_VSCCLRM *a) +{ + int btmreg, topreg; + TCGv_i64 zero; + TCGv_i32 aspen, sfpa; + + if (!dc_isar_feature(aa32_m_sec_state, s)) { + /* Before v8.1M, fall through in decode to NOCP check */ + return false; + } + + /* Explicitly UNDEF because this takes precedence over NOCP */ + if (!arm_dc_feature(s, ARM_FEATURE_M_MAIN) || !s->v8m_secure) { + unallocated_encoding(s); + return true; + } + + if (!dc_isar_feature(aa32_vfp_simd, s)) { + /* NOP if we have neither FP nor MVE */ + return true; + } + + /* + * If FPCCR.ASPEN != 0 && CONTROL_S.SFPA == 0 then there is no + * active floating point context so we must NOP (without doing + * any lazy state preservation or the NOCP check). + */ + aspen = load_cpu_field(v7m.fpccr[M_REG_S]); + sfpa = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_xori_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_andi_i32(sfpa, sfpa, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_or_i32(sfpa, sfpa, aspen); + arm_gen_condlabel(s); + tcg_gen_brcondi_i32(TCG_COND_EQ, sfpa, 0, s->condlabel); + + if (s->fp_excp_el != 0) { + gen_exception_insn(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), s->fp_excp_el); + return true; + } + + topreg = a->vd + a->imm - 1; + btmreg = a->vd; + + /* Convert to Sreg numbers if the insn specified in Dregs */ + if (a->size == 3) { + topreg = topreg * 2 + 1; + btmreg *= 2; + } + + if (topreg > 63 || (topreg > 31 && !(topreg & 1))) { + /* UNPREDICTABLE: we choose to undef */ + unallocated_encoding(s); + return true; + } + + /* Silently ignore requests to clear D16-D31 if they don't exist */ + if (topreg > 31 && !dc_isar_feature(aa32_simd_r32, s)) { + topreg = 31; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* Zero the Sregs from btmreg to topreg inclusive. */ + zero = tcg_const_i64(0); + if (btmreg & 1) { + write_neon_element64(zero, btmreg >> 1, 1, MO_32); + btmreg++; + } + for (; btmreg + 1 <= topreg; btmreg += 2) { + write_neon_element64(zero, btmreg >> 1, 0, MO_64); + } + if (btmreg == topreg) { + write_neon_element64(zero, btmreg >> 1, 0, MO_32); + btmreg++; + } + assert(btmreg == topreg + 1); + /* TODO: when MVE is implemented, zero VPR here */ + return true; +} + static bool trans_NOCP(DisasContext *s, arg_nocp *a) { /* -- 2.20.1 In v8.1M the new CLRM instruction allows zeroing an arbitrary set of the general-purpose registers and APSR. Implement this. The encoding is a subset of the LDMIA T2 encoding, using what would be Rn=0b1111 (which UNDEFs for LDMIA). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-6-peter.maydell@linaro.org --- target/arm/t32.decode | 6 +++++- target/arm/translate.c | 38 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+), 1 deletion(-) diff --git a/target/arm/t32.decode b/target/arm/t32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/t32.decode +++ b/target/arm/t32.decode @@ -XXX,XX +XXX,XX @@ UXTAB 1111 1010 0101 .... 1111 .... 10.. .... @rrr_rot STM_t32 1110 1000 10.0 .... ................ @ldstm i=1 b=0 STM_t32 1110 1001 00.0 .... ................ @ldstm i=0 b=1 -LDM_t32 1110 1000 10.1 .... ................ @ldstm i=1 b=0 +{ + # Rn=15 UNDEFs for LDM; M-profile CLRM uses that encoding + CLRM 1110 1000 1001 1111 list:16 + LDM_t32 1110 1000 10.1 .... ................ @ldstm i=1 b=0 +} LDM_t32 1110 1001 00.1 .... ................ @ldstm i=0 b=1 &rfe !extern rn w pu diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDM_t16(DisasContext *s, arg_ldst_block *a) return do_ldm(s, a, 1); } +static bool trans_CLRM(DisasContext *s, arg_CLRM *a) +{ + int i; + TCGv_i32 zero; + + if (!dc_isar_feature(aa32_m_sec_state, s)) { + return false; + } + + if (extract32(a->list, 13, 1)) { + return false; + } + + if (!a->list) { + /* UNPREDICTABLE; we choose to UNDEF */ + return false; + } + + zero = tcg_const_i32(0); + for (i = 0; i < 15; i++) { + if (extract32(a->list, i, 1)) { + /* Clear R[i] */ + tcg_gen_mov_i32(cpu_R[i], zero); + } + } + if (extract32(a->list, 15, 1)) { + /* + * Clear APSR (by calling the MSR helper with the same argument + * as for "MSR APSR_nzcvqg, Rn": mask = 0b1100, SYSM=0) + */ + TCGv_i32 maskreg = tcg_const_i32(0xc << 8); + gen_helper_v7m_msr(cpu_env, maskreg, zero); + tcg_temp_free_i32(maskreg); + } + tcg_temp_free_i32(zero); + return true; +} + /* * Branch, branch with link */ -- 2.20.1 For M-profile before v8.1M, the only valid register for VMSR/VMRS is the FPSCR. We have a comment that states this, but the actual logic to forbid accesses for any other register value is missing, so we would end up with A-profile style behaviour. Add the missing check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-7-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) * Accesses to R15 are UNPREDICTABLE; we choose to undef. * (FPSCR -> r15 is a special case which writes to the PSR flags.) */ - if (a->rt == 15 && (!a->l || a->reg != ARM_VFP_FPSCR)) { + if (a->reg != ARM_VFP_FPSCR) { + return false; + } + if (a->rt == 15 && !a->l) { return false; } } -- 2.20.1 Currently M-profile borrows the A-profile code for VMSR and VMRS (access to the FP system registers), because all it needs to support is the FPSCR. In v8.1M things become significantly more complicated in two ways: * there are several new FP system registers; some have side effects on read, and one (FPCXT_NS) needs to avoid the usual vfp_access_check() and the "only if FPU implemented" check * all sysregs are now accessible both by VMRS/VMSR (which reads/writes a general purpose register) and also by VLDR/VSTR (which reads/writes them directly to memory) Refactor the structure of how we handle VMSR/VMRS to cope with this: * keep the M-profile code entirely separate from the A-profile code * abstract out the "read or write the general purpose register" part of the code into a loadfn or storefn function pointer, so we can reuse it for VLDR/VSTR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-8-peter.maydell@linaro.org --- target/arm/cpu.h | 3 + target/arm/translate-vfp.c.inc | 182 ++++++++++++++++++++++++++++++--- 2 files changed, 171 insertions(+), 14 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_cpu_mode { #define ARM_VFP_FPINST 9 #define ARM_VFP_FPINST2 10 +/* QEMU-internal value meaning "FPSCR, but we care only about NZCV" */ +#define QEMU_VFP_FPSCR_NZCV 0xffff + /* iwMMXt coprocessor control registers. */ #define ARM_IWMMXT_wCID 0 #define ARM_IWMMXT_wCon 1 diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP(DisasContext *s, arg_VDUP *a) return true; } +/* + * M-profile provides two different sets of instructions that can + * access floating point system registers: VMSR/VMRS (which move + * to/from a general purpose register) and VLDR/VSTR sysreg (which + * move directly to/from memory). In some cases there are also side + * effects which must happen after any write to memory (which could + * cause an exception). So we implement the common logic for the + * sysreg access in gen_M_fp_sysreg_write() and gen_M_fp_sysreg_read(), + * which take pointers to callback functions which will perform the + * actual "read/write general purpose register" and "read/write + * memory" operations. + */ + +/* + * Emit code to store the sysreg to its final destination; frees the + * TCG temp 'value' it is passed. + */ +typedef void fp_sysreg_storefn(DisasContext *s, void *opaque, TCGv_i32 value); +/* + * Emit code to load the value to be copied to the sysreg; returns + * a new TCG temporary + */ +typedef TCGv_i32 fp_sysreg_loadfn(DisasContext *s, void *opaque); + +/* Common decode/access checks for fp sysreg read/write */ +typedef enum FPSysRegCheckResult { + FPSysRegCheckFailed, /* caller should return false */ + FPSysRegCheckDone, /* caller should return true */ + FPSysRegCheckContinue, /* caller should continue generating code */ +} FPSysRegCheckResult; + +static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) +{ + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return FPSysRegCheckFailed; + } + + switch (regno) { + case ARM_VFP_FPSCR: + case QEMU_VFP_FPSCR_NZCV: + break; + default: + return FPSysRegCheckFailed; + } + + if (!vfp_access_check(s)) { + return FPSysRegCheckDone; + } + + return FPSysRegCheckContinue; +} + +static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, + + fp_sysreg_loadfn *loadfn, + void *opaque) +{ + /* Do a write to an M-profile floating point system register */ + TCGv_i32 tmp; + + switch (fp_sysreg_checks(s, regno)) { + case FPSysRegCheckFailed: + return false; + case FPSysRegCheckDone: + return true; + case FPSysRegCheckContinue: + break; + } + + switch (regno) { + case ARM_VFP_FPSCR: + tmp = loadfn(s, opaque); + gen_helper_vfp_set_fpscr(cpu_env, tmp); + tcg_temp_free_i32(tmp); + gen_lookup_tb(s); + break; + default: + g_assert_not_reached(); + } + return true; +} + +static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, + fp_sysreg_storefn *storefn, + void *opaque) +{ + /* Do a read from an M-profile floating point system register */ + TCGv_i32 tmp; + + switch (fp_sysreg_checks(s, regno)) { + case FPSysRegCheckFailed: + return false; + case FPSysRegCheckDone: + return true; + case FPSysRegCheckContinue: + break; + } + + switch (regno) { + case ARM_VFP_FPSCR: + tmp = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(tmp, cpu_env); + storefn(s, opaque, tmp); + break; + case QEMU_VFP_FPSCR_NZCV: + /* + * Read just NZCV; this is a special case to avoid the + * helper call for the "VMRS to CPSR.NZCV" insn. + */ + tmp = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); + tcg_gen_andi_i32(tmp, tmp, 0xf0000000); + storefn(s, opaque, tmp); + break; + default: + g_assert_not_reached(); + } + return true; +} + +static void fp_sysreg_to_gpr(DisasContext *s, void *opaque, TCGv_i32 value) +{ + arg_VMSR_VMRS *a = opaque; + + if (a->rt == 15) { + /* Set the 4 flag bits in the CPSR */ + gen_set_nzcv(value); + tcg_temp_free_i32(value); + } else { + store_reg(s, a->rt, value); + } +} + +static TCGv_i32 gpr_to_fp_sysreg(DisasContext *s, void *opaque) +{ + arg_VMSR_VMRS *a = opaque; + + return load_reg(s, a->rt); +} + +static bool gen_M_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) +{ + /* + * Accesses to R15 are UNPREDICTABLE; we choose to undef. + * FPSCR -> r15 is a special case which writes to the PSR flags; + * set a->reg to a special value to tell gen_M_fp_sysreg_read() + * we only care about the top 4 bits of FPSCR there. + */ + if (a->rt == 15) { + if (a->l && a->reg == ARM_VFP_FPSCR) { + a->reg = QEMU_VFP_FPSCR_NZCV; + } else { + return false; + } + } + + if (a->l) { + /* VMRS, move FP system register to gp register */ + return gen_M_fp_sysreg_read(s, a->reg, fp_sysreg_to_gpr, a); + } else { + /* VMSR, move gp register to FP system register */ + return gen_M_fp_sysreg_write(s, a->reg, gpr_to_fp_sysreg, a); + } +} + static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) { TCGv_i32 tmp; bool ignore_vfp_enabled = false; - if (!dc_isar_feature(aa32_fpsp_v2, s)) { - return false; + if (arm_dc_feature(s, ARM_FEATURE_M)) { + return gen_M_VMSR_VMRS(s, a); } - if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* - * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. - * Accesses to R15 are UNPREDICTABLE; we choose to undef. - * (FPSCR -> r15 is a special case which writes to the PSR flags.) - */ - if (a->reg != ARM_VFP_FPSCR) { - return false; - } - if (a->rt == 15 && !a->l) { - return false; - } + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; } switch (a->reg) { -- 2.20.1 The constant-expander functions like negate, plus_2, etc, are generally useful; move them up in translate.c so we can use them in the VFP/Neon decoders as well as in the A32/T32/T16 decoders. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-9-peter.maydell@linaro.org --- target/arm/translate.c | 46 +++++++++++++++++++++++------------------- 1 file changed, 25 insertions(+), 21 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_gen_condlabel(DisasContext *s) } } +/* + * Constant expanders for the decoders. + */ + +static int negate(DisasContext *s, int x) +{ + return -x; +} + +static int plus_2(DisasContext *s, int x) +{ + return x + 2; +} + +static int times_2(DisasContext *s, int x) +{ + return x * 2; +} + +static int times_4(DisasContext *s, int x) +{ + return x * 4; +} + /* Flags for the disas_set_da_iss info argument: * lower bits hold the Rt register number, higher bits are flags. */ @@ -XXX,XX +XXX,XX @@ static void arm_skip_unless(DisasContext *s, uint32_t cond) /* - * Constant expanders for the decoders. + * Constant expanders used by T16/T32 decode */ -static int negate(DisasContext *s, int x) -{ - return -x; -} - -static int plus_2(DisasContext *s, int x) -{ - return x + 2; -} - -static int times_2(DisasContext *s, int x) -{ - return x * 2; -} - -static int times_4(DisasContext *s, int x) -{ - return x * 4; -} - /* Return only the rotation part of T32ExpandImm. */ static int t32_expandimm_rot(DisasContext *s, int x) { -- 2.20.1 Implement the new-in-v8.1M VLDR/VSTR variants which directly read or write FP system registers to memory. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-10-peter.maydell@linaro.org --- target/arm/vfp.decode | 14 ++++++ target/arm/translate-vfp.c.inc | 91 ++++++++++++++++++++++++++++++++++ 2 files changed, 105 insertions(+) diff --git a/target/arm/vfp.decode b/target/arm/vfp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp.decode +++ b/target/arm/vfp.decode @@ -XXX,XX +XXX,XX @@ VLDR_VSTR_hp ---- 1101 u:1 .0 l:1 rn:4 .... 1001 imm:8 vd=%vd_sp VLDR_VSTR_sp ---- 1101 u:1 .0 l:1 rn:4 .... 1010 imm:8 vd=%vd_sp VLDR_VSTR_dp ---- 1101 u:1 .0 l:1 rn:4 .... 1011 imm:8 vd=%vd_dp +# M-profile VLDR/VSTR to sysreg +%vldr_sysreg 22:1 13:3 +%imm7_0x4 0:7 !function=times_4 + +&vldr_sysreg rn reg imm a w p +@vldr_sysreg .... ... . a:1 . . . rn:4 ... . ... .. ....... \ + reg=%vldr_sysreg imm=%imm7_0x4 &vldr_sysreg + +# P=0 W=0 is SEE "Related encodings", so split into two patterns +VLDR_sysreg ---- 110 1 . . w:1 1 .... ... 0 111 11 ....... @vldr_sysreg p=1 +VLDR_sysreg ---- 110 0 . . 1 1 .... ... 0 111 11 ....... @vldr_sysreg p=0 w=1 +VSTR_sysreg ---- 110 1 . . w:1 0 .... ... 0 111 11 ....... @vldr_sysreg p=1 +VSTR_sysreg ---- 110 0 . . 1 0 .... ... 0 111 11 ....... @vldr_sysreg p=0 w=1 + # We split the load/store multiple up into two patterns to avoid # overlap with other insns in the "Advanced SIMD load/store and 64-bit move" # grouping: diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) return true; } +static void fp_sysreg_to_memory(DisasContext *s, void *opaque, TCGv_i32 value) +{ + arg_vldr_sysreg *a = opaque; + uint32_t offset = a->imm; + TCGv_i32 addr; + + if (!a->a) { + offset = - offset; + } + + addr = load_reg(s, a->rn); + if (a->p) { + tcg_gen_addi_i32(addr, addr, offset); + } + + if (s->v8m_stackcheck && a->rn == 13 && a->w) { + gen_helper_v8m_stackcheck(cpu_env, addr); + } + + gen_aa32_st_i32(s, value, addr, get_mem_index(s), + MO_UL | MO_ALIGN | s->be_data); + tcg_temp_free_i32(value); + + if (a->w) { + /* writeback */ + if (!a->p) { + tcg_gen_addi_i32(addr, addr, offset); + } + store_reg(s, a->rn, addr); + } else { + tcg_temp_free_i32(addr); + } +} + +static TCGv_i32 memory_to_fp_sysreg(DisasContext *s, void *opaque) +{ + arg_vldr_sysreg *a = opaque; + uint32_t offset = a->imm; + TCGv_i32 addr; + TCGv_i32 value = tcg_temp_new_i32(); + + if (!a->a) { + offset = - offset; + } + + addr = load_reg(s, a->rn); + if (a->p) { + tcg_gen_addi_i32(addr, addr, offset); + } + + if (s->v8m_stackcheck && a->rn == 13 && a->w) { + gen_helper_v8m_stackcheck(cpu_env, addr); + } + + gen_aa32_ld_i32(s, value, addr, get_mem_index(s), + MO_UL | MO_ALIGN | s->be_data); + + if (a->w) { + /* writeback */ + if (!a->p) { + tcg_gen_addi_i32(addr, addr, offset); + } + store_reg(s, a->rn, addr); + } else { + tcg_temp_free_i32(addr); + } + return value; +} + +static bool trans_VLDR_sysreg(DisasContext *s, arg_vldr_sysreg *a) +{ + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + if (a->rn == 15) { + return false; + } + return gen_M_fp_sysreg_write(s, a->reg, memory_to_fp_sysreg, a); +} + +static bool trans_VSTR_sysreg(DisasContext *s, arg_vldr_sysreg *a) +{ + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + if (a->rn == 15) { + return false; + } + return gen_M_fp_sysreg_read(s, a->reg, fp_sysreg_to_memory, a); +} + static bool trans_VMOV_half(DisasContext *s, arg_VMOV_single *a) { TCGv_i32 tmp; -- 2.20.1 v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves like the existing FPSCR, except that it reads and writes only bits [31:27] of the FPSCR (the N, Z, C, V and QC flag bits). (Unlike the FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not permitted.) Implement the register. Since we don't yet implement MVE, we handle the QC bit as RES0, with todo comments for where we will need to add support later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-11-peter.maydell@linaro.org --- target/arm/cpu.h | 13 +++++++++++++ target/arm/translate-vfp.c.inc | 27 +++++++++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val); #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ #define FPCR_DN (1 << 25) /* Default NaN enable bit */ #define FPCR_QC (1 << 27) /* Cumulative saturation bit */ +#define FPCR_V (1 << 28) /* FP overflow flag */ +#define FPCR_C (1 << 29) /* FP carry flag */ +#define FPCR_Z (1 << 30) /* FP zero flag */ +#define FPCR_N (1 << 31) /* FP negative flag */ + +#define FPCR_NZCV_MASK (FPCR_N | FPCR_Z | FPCR_C | FPCR_V) +#define FPCR_NZCVQC_MASK (FPCR_NZCV_MASK | FPCR_QC) static inline uint32_t vfp_get_fpsr(CPUARMState *env) { @@ -XXX,XX +XXX,XX @@ enum arm_cpu_mode { #define ARM_VFP_FPEXC 8 #define ARM_VFP_FPINST 9 #define ARM_VFP_FPINST2 10 +/* These ones are M-profile only */ +#define ARM_VFP_FPSCR_NZCVQC 2 +#define ARM_VFP_VPR 12 +#define ARM_VFP_P0 13 +#define ARM_VFP_FPCXT_NS 14 +#define ARM_VFP_FPCXT_S 15 /* QEMU-internal value meaning "FPSCR, but we care only about NZCV" */ #define QEMU_VFP_FPSCR_NZCV 0xffff diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) case ARM_VFP_FPSCR: case QEMU_VFP_FPSCR_NZCV: break; + case ARM_VFP_FPSCR_NZCVQC: + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + break; default: return FPSysRegCheckFailed; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); gen_lookup_tb(s); break; + case ARM_VFP_FPSCR_NZCVQC: + { + TCGv_i32 fpscr; + tmp = loadfn(s, opaque); + /* + * TODO: when we implement MVE, write the QC bit. + * For non-MVE, QC is RES0. + */ + tcg_gen_andi_i32(tmp, tmp, FPCR_NZCV_MASK); + fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); + tcg_gen_andi_i32(fpscr, fpscr, ~FPCR_NZCV_MASK); + tcg_gen_or_i32(fpscr, fpscr, tmp); + store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + tcg_temp_free_i32(tmp); + break; + } default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, gen_helper_vfp_get_fpscr(tmp, cpu_env); storefn(s, opaque, tmp); break; + case ARM_VFP_FPSCR_NZCVQC: + /* + * TODO: MVE has a QC bit, which we probably won't store + * in the xregs[] field. For non-MVE, where QC is RES0, + * we can just fall through to the FPSCR_NZCV case. + */ case QEMU_VFP_FPSCR_NZCV: /* * Read just NZCV; this is a special case to avoid the -- 2.20.1 We defined a constant name for the mask of NZCV bits in the FPCR/FPSCR in the previous commit; use it in a couple of places in existing code, where we're masking out everything except NZCV for the "load to Rt=15 sets CPSR.NZCV" special case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-12-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, * helper call for the "VMRS to CPSR.NZCV" insn. */ tmp = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(tmp, tmp, 0xf0000000); + tcg_gen_andi_i32(tmp, tmp, FPCR_NZCV_MASK); storefn(s, opaque, tmp); break; default: @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) case ARM_VFP_FPSCR: if (a->rt == 15) { tmp = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(tmp, tmp, 0xf0000000); + tcg_gen_andi_i32(tmp, tmp, FPCR_NZCV_MASK); } else { tmp = tcg_temp_new_i32(); gen_helper_vfp_get_fpscr(tmp, cpu_env); -- 2.20.1 Factor out the code which handles M-profile lazy FP state preservation from full_vfp_access_check(); accesses to the FPCXT_NS register are a special case which need to do just this part (corresponding in the pseudocode to the PreserveFPState() function), and not the full set of actions matching the pseudocode ExecuteFPCheck() which normal FP instructions need to do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201119215617.29887-13-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 45 ++++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 18 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static inline long vfp_f16_offset(unsigned reg, bool top) return offs; } +/* + * Generate code for M-profile lazy FP state preservation if needed; + * this corresponds to the pseudocode PreserveFPState() function. + */ +static void gen_preserve_fp_state(DisasContext *s) +{ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount (and cause + * this to be the last insn in the TB). + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + s->base.is_jmp = DISAS_UPDATE_EXIT; + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } +} + /* * Check that VFP access is enabled. If it is, do the necessary * M-profile lazy-FP handling and then return true. @@ -XXX,XX +XXX,XX @@ static bool full_vfp_access_check(DisasContext *s, bool ignore_vfp_enabled) /* Handle M-profile lazy FP state mechanics */ /* Trigger lazy-state preservation if necessary */ - if (s->v7m_lspact) { - /* - * Lazy state saving affects external memory and also the NVIC, - * so we must mark it as an IO operation for icount (and cause - * this to be the last insn in the TB). - */ - if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { - s->base.is_jmp = DISAS_UPDATE_EXIT; - gen_io_start(); - } - gen_helper_v7m_preserve_fp_state(cpu_env); - /* - * If the preserve_fp_state helper doesn't throw an exception - * then it will clear LSPACT; we don't need to repeat this for - * any further FP insns in this TB. - */ - s->v7m_lspact = false; - } + gen_preserve_fp_state(s); /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { -- 2.20.1 Implement the new-in-v8.1M FPCXT_S floating point system register. This is for saving and restoring the secure floating point context, and it reads and writes bits [27:0] from the FPSCR and the CONTROL.SFPA bit in bit [31]. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-14-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 58 ++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return false; } break; + case ARM_VFP_FPCXT_S: + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + if (!s->v8m_secure) { + return false; + } + break; default: return FPSysRegCheckFailed; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); break; } + case ARM_VFP_FPCXT_S: + { + TCGv_i32 sfpa, control, fpscr; + /* Set FPSCR[27:0] and CONTROL.SFPA from value */ + tmp = loadfn(s, opaque); + sfpa = tcg_temp_new_i32(); + tcg_gen_shri_i32(sfpa, tmp, 31); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_deposit_i32(control, control, sfpa, + R_V7M_CONTROL_SFPA_SHIFT, 1); + store_cpu_field(control, v7m.control[M_REG_S]); + fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); + tcg_gen_andi_i32(fpscr, fpscr, FPCR_NZCV_MASK); + tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); + tcg_gen_or_i32(fpscr, fpscr, tmp); + store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(sfpa); + break; + } default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, tcg_gen_andi_i32(tmp, tmp, FPCR_NZCV_MASK); storefn(s, opaque, tmp); break; + case ARM_VFP_FPCXT_S: + { + TCGv_i32 control, sfpa, fpscr; + /* Bits [27:0] from FPSCR, bit [31] from CONTROL.SFPA */ + tmp = tcg_temp_new_i32(); + sfpa = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(tmp, cpu_env); + tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(sfpa, control, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_shli_i32(sfpa, sfpa, 31 - R_V7M_CONTROL_SFPA_SHIFT); + tcg_gen_or_i32(tmp, tmp, sfpa); + tcg_temp_free_i32(sfpa); + /* + * Store result before updating FPSCR etc, in case + * it is a memory write which causes an exception. + */ + storefn(s, opaque, tmp); + /* + * Now we must reset FPSCR from FPDSCR_NS, and clear + * CONTROL.SFPA; so we'll end the TB here. + */ + tcg_gen_andi_i32(control, control, ~R_V7M_CONTROL_SFPA_MASK); + store_cpu_field(control, v7m.control[M_REG_S]); + fpscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + gen_lookup_tb(s); + break; + } default: g_assert_not_reached(); } -- 2.20.1 The FPDSCR register has a similar layout to the FPSCR. In v8.1M it gains new fields FZ16 (if half-precision floating point is supported) and LTPSIZE (always reads as 4). Update the reset value and the code that handles writes to this register accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-16-peter.maydell@linaro.org --- target/arm/cpu.h | 5 +++++ hw/intc/armv7m_nvic.c | 9 ++++++++- target/arm/cpu.c | 3 +++ 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val); #define FPCR_IXE (1 << 12) /* Inexact exception trap enable */ #define FPCR_IDE (1 << 15) /* Input Denormal exception trap enable */ #define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ +#define FPCR_RMODE_MASK (3 << 22) /* Rounding mode */ #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ #define FPCR_DN (1 << 25) /* Default NaN enable bit */ +#define FPCR_AHP (1 << 26) /* Alternative half-precision */ #define FPCR_QC (1 << 27) /* Cumulative saturation bit */ #define FPCR_V (1 << 28) /* FP overflow flag */ #define FPCR_C (1 << 29) /* FP carry flag */ #define FPCR_Z (1 << 30) /* FP zero flag */ #define FPCR_N (1 << 31) /* FP negative flag */ +#define FPCR_LTPSIZE_SHIFT 16 /* LTPSIZE, M-profile only */ +#define FPCR_LTPSIZE_MASK (7 << FPCR_LTPSIZE_SHIFT) + #define FPCR_NZCV_MASK (FPCR_N | FPCR_Z | FPCR_C | FPCR_V) #define FPCR_NZCVQC_MASK (FPCR_NZCV_MASK | FPCR_QC) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, break; case 0xf3c: /* FPDSCR */ if (cpu_isar_feature(aa32_vfp_simd, cpu)) { - value &= 0x07c00000; + uint32_t mask = FPCR_AHP | FPCR_DN | FPCR_FZ | FPCR_RMODE_MASK; + if (cpu_isar_feature(any_fp16, cpu)) { + mask |= FPCR_FZ16; + } + value &= mask; + if (cpu_isar_feature(aa32_lob, cpu)) { + value |= 4 << FPCR_LTPSIZE_SHIFT; + } cpu->env.v7m.fpdscr[attrs.secure] = value; } break; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) * always reset to 4. */ env->v7m.ltpsize = 4; + /* The LTPSIZE field in FPDSCR is constant and reads as 4. */ + env->v7m.fpdscr[M_REG_NS] = 4 << FPCR_LTPSIZE_SHIFT; + env->v7m.fpdscr[M_REG_S] = 4 << FPCR_LTPSIZE_SHIFT; } if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { -- 2.20.1 In v8.0M, on exception entry the registers R0-R3, R12, APSR and EPSR are zeroed for an exception taken to Non-secure state; for an exception taken to Secure state they become UNKNOWN, and we chose to leave them at their previous values. In v8.1M the behaviour is specified more tightly and these registers are always zeroed regardless of the security state that the exception targets (see rule R_KPZV). Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-17-peter.maydell@linaro.org --- target/arm/m_helper.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, * Clear registers if necessary to prevent non-secure exception * code being able to see register values from secure code. * Where register values become architecturally UNKNOWN we leave - * them with their previous values. + * them with their previous values. v8.1M is tighter than v8.0M + * here and always zeroes the caller-saved registers regardless + * of the security state the exception is targeting. */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - if (!targets_secure) { + if (!targets_secure || arm_feature(env, ARM_FEATURE_V8_1M)) { /* * Always clear the caller-saved registers (they have been * pushed to the stack earlier in v7m_push_stack()). @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, * v7m_push_callee_stack()). */ int i; + /* + * r4..r11 are callee-saves, zero only if background + * state was Secure (EXCRET.S == 1) and exception + * targets Non-secure state + */ + bool zero_callee_saves = !targets_secure && + (lr & R_V7M_EXCRET_S_MASK); for (i = 0; i < 13; i++) { - /* r4..r11 are callee-saves, zero only if EXCRET.S == 1 */ - if (i < 4 || i > 11 || (lr & R_V7M_EXCRET_S_MASK)) { + if (i < 4 || i > 11 || zero_callee_saves) { env->regs[i] = 0; } } -- 2.20.1 In v8.1M, vector table fetch failures don't set HFSR.FORCED (see rule R_LLRP). (In previous versions of the architecture this was either required or IMPDEF.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-18-peter.maydell@linaro.org --- target/arm/m_helper.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ load_fail: * The HardFault is Secure if BFHFNMINS is 0 (meaning that all HFs are * secure); otherwise it targets the same security state as the * underlying exception. + * In v8.1M HardFaults from vector table fetch fails don't set FORCED. */ if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { exc_secure = true; } - env->v7m.hfsr |= R_V7M_HFSR_VECTTBL_MASK | R_V7M_HFSR_FORCED_MASK; + env->v7m.hfsr |= R_V7M_HFSR_VECTTBL_MASK; + if (!arm_feature(env, ARM_FEATURE_V8_1M)) { + env->v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } armv7m_nvic_set_pending_derived(env->nvic, ARMV7M_EXCP_HARD, exc_secure); return false; } -- 2.20.1 In v8.1M a REVIDR register is defined, which is at address 0xe00ecfc and is a read-only IMPDEF register providing implementation specific minor revision information, like the v8A REVIDR_EL1. Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-19-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } return val; } + case 0xcfc: + if (!arm_feature(&cpu->env, ARM_FEATURE_V8_1M)) { + goto bad_offset; + } + return cpu->revidr; case 0xd00: /* CPUID Base. */ return cpu->midr; case 0xd04: /* Interrupt Control State (ICSR) */ -- 2.20.1 In v8.1M a new exception return check is added which may cause a NOCP UsageFault (see rule R_XLTP): before we clear s0..s15 and the FPSCR we must check whether access to CP10 from the Security state of the returning exception is disabled; if it is then we must take a fault. (Note that for our implementation CPPWR is always RAZ/WI and so can never cause CP10 accesses to fail.) The other v8.1M change to this register-clearing code is that if MVE is implemented VPR must also be cleared, so add a TODO comment to that effect. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-20-peter.maydell@linaro.org --- target/arm/m_helper.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) v7m_exception_taken(cpu, excret, true, false); return; } else { - /* Clear s0..s15 and FPSCR */ + if (arm_feature(env, ARM_FEATURE_V8_1M)) { + /* v8.1M adds this NOCP check */ + bool nsacr_pass = exc_secure || + extract32(env->v7m.nsacr, 10, 1); + bool cpacr_pass = v7m_cpacr_pass(env, exc_secure, true); + if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " + "stackframe: NSACR prevents clearing FPU registers\n"); + v7m_exception_taken(cpu, excret, true, false); + } else if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + exc_secure); + env->v7m.cfsr[exc_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " + "stackframe: CPACR prevents clearing FPU registers\n"); + v7m_exception_taken(cpu, excret, true, false); + } + } + /* Clear s0..s15 and FPSCR; TODO also VPR when MVE is implemented */ int i; for (i = 0; i < 16; i += 2) { -- 2.20.1 v8.1M adds new encodings of VLLDM and VLSTM (where bit 7 is set). The only difference is that: * the old T1 encodings UNDEF if the implementation implements 32 Dregs (this is currently architecturally impossible for M-profile) * the new T2 encodings have the implementation-defined option to read from memory (discarding the data) or write UNKNOWN values to memory for the stack slots that would be D16-D31 We choose not to make those accesses, so for us the two instructions behave identically assuming they don't UNDEF. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-21-peter.maydell@linaro.org --- target/arm/m-nocp.decode | 2 +- target/arm/translate-vfp.c.inc | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/target/arm/m-nocp.decode b/target/arm/m-nocp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m-nocp.decode +++ b/target/arm/m-nocp.decode @@ -XXX,XX +XXX,XX @@ { # Special cases which do not take an early NOCP: VLLDM and VLSTM - VLLDM_VLSTM 1110 1100 001 l:1 rn:4 0000 1010 0000 0000 + VLLDM_VLSTM 1110 1100 001 l:1 rn:4 0000 1010 op:1 000 0000 # VSCCLRM (new in v8.1M) is similar: VSCCLRM 1110 1100 1.01 1111 .... 1011 imm:7 0 vd=%vd_dp size=3 VSCCLRM 1110 1100 1.01 1111 .... 1010 imm:8 vd=%vd_sp size=2 diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLLDM_VLSTM(DisasContext *s, arg_VLLDM_VLSTM *a) !arm_dc_feature(s, ARM_FEATURE_V8)) { return false; } + + if (a->op) { + /* + * T2 encoding ({D0-D31} reglist): v8.1M and up. We choose not + * to take the IMPDEF option to make memory accesses to the stack + * slots that correspond to the D16-D31 registers (discarding + * read data and writing UNKNOWN values), so for us the T2 + * encoding behaves identically to the T1 encoding. + */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + } else { + /* + * T1 encoding ({D0-D15} reglist); undef if we have 32 Dregs. + * This is currently architecturally impossible, but we add the + * check to stay in line with the pseudocode. Note that we must + * emit code for the UNDEF so it takes precedence over the NOCP. + */ + if (dc_isar_feature(aa32_simd_r32, s)) { + unallocated_encoding(s); + return true; + } + } + /* * If not secure, UNDEF. We must emit code for this * rather than returning false so that this takes -- 2.20.1 v8.1M introduces a new TRD flag in the CCR register, which enables checking for stack frame integrity signatures on SG instructions. This bit is not banked, and is always RAZ/WI to Non-secure code. Adjust the code for handling CCR reads and writes to handle this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-23-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ hw/intc/armv7m_nvic.c | 26 ++++++++++++++++++-------- 2 files changed, 20 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CCR, STKOFHFNMIGN, 10, 1) FIELD(V7M_CCR, DC, 16, 1) FIELD(V7M_CCR, IC, 17, 1) FIELD(V7M_CCR, BP, 18, 1) +FIELD(V7M_CCR, LOB, 19, 1) +FIELD(V7M_CCR, TRD, 20, 1) /* V7M SCR bits */ FIELD(V7M_SCR, SLEEPONEXIT, 1, 1) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } return cpu->env.v7m.scr[attrs.secure]; case 0xd14: /* Configuration Control. */ - /* The BFHFNMIGN bit is the only non-banked bit; we - * keep it in the non-secure copy of the register. + /* + * Non-banked bits: BFHFNMIGN (stored in the NS copy of the register) + * and TRD (stored in the S copy of the register) */ val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.scr[attrs.secure] = value; break; case 0xd14: /* Configuration Control. */ + { + uint32_t mask; + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { goto bad_offset; } /* Enforce RAZ/WI on reserved and must-RAZ/WI bits */ - value &= (R_V7M_CCR_STKALIGN_MASK | - R_V7M_CCR_BFHFNMIGN_MASK | - R_V7M_CCR_DIV_0_TRP_MASK | - R_V7M_CCR_UNALIGN_TRP_MASK | - R_V7M_CCR_USERSETMPEND_MASK | - R_V7M_CCR_NONBASETHRDENA_MASK); + mask = R_V7M_CCR_STKALIGN_MASK | + R_V7M_CCR_BFHFNMIGN_MASK | + R_V7M_CCR_DIV_0_TRP_MASK | + R_V7M_CCR_UNALIGN_TRP_MASK | + R_V7M_CCR_USERSETMPEND_MASK | + R_V7M_CCR_NONBASETHRDENA_MASK; + if (arm_feature(&cpu->env, ARM_FEATURE_V8_1M) && attrs.secure) { + /* TRD is always RAZ/WI from NS */ + mask |= R_V7M_CCR_TRD_MASK; + } + value &= mask; if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { /* v8M makes NONBASETHRDENA and STKALIGN be RES1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.ccr[attrs.secure] = value; break; + } case 0xd24: /* System Handler Control and State (SHCSR) */ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { goto bad_offset; -- 2.20.1 v8.1M introduces a new TRD flag in the CCR register, which enables checking for stack frame integrity signatures on SG instructions. Add the code in the SG insn implementation for the new behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-24-peter.maydell@linaro.org --- target/arm/m_helper.c | 86 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, return true; } +static bool v7m_read_sg_stack_word(ARMCPU *cpu, ARMMMUIdx mmu_idx, + uint32_t addr, uint32_t *spdata) +{ + /* + * Read a word of data from the stack for the SG instruction, + * writing the value into *spdata. If the load succeeds, return + * true; otherwise pend an appropriate exception and return false. + * (We can't use data load helpers here that throw an exception + * because of the context we're called in, which is halfway through + * arm_v7m_cpu_do_interrupt().) + */ + CPUState *cs = CPU(cpu); + CPUARMState *env = &cpu->env; + MemTxAttrs attrs = {}; + MemTxResult txres; + target_ulong page_size; + hwaddr physaddr; + int prot; + ARMMMUFaultInfo fi = {}; + ARMCacheAttrs cacheattrs = {}; + uint32_t value; + + if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &physaddr, + &attrs, &prot, &page_size, &fi, &cacheattrs)) { + /* MPU/SAU lookup failed */ + if (fi.type == ARMFault_QEMU_SFault) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault during stack word read\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + env->v7m.sfar = addr; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault during stack word read\n"); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_DACCVIOL_MASK | + R_V7M_CFSR_MMARVALID_MASK; + env->v7m.mmfar[M_REG_S] = addr; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM, false); + } + return false; + } + value = address_space_ldl(arm_addressspace(cs, attrs), physaddr, + attrs, &txres); + if (txres != MEMTX_OK) { + /* BusFault trying to read the data */ + qemu_log_mask(CPU_LOG_INT, + "...BusFault during stack word read\n"); + env->v7m.cfsr[M_REG_NS] |= + (R_V7M_CFSR_PRECISERR_MASK | R_V7M_CFSR_BFARVALID_MASK); + env->v7m.bfar = addr; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); + return false; + } + + *spdata = value; + return true; +} + static bool v7m_handle_execute_nsc(ARMCPU *cpu) { /* @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) */ qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); + + if (cpu_isar_feature(aa32_m_sec_state, cpu) && + !arm_v7m_is_handler_mode(env)) { + /* + * v8.1M exception stack frame integrity check. Note that we + * must perform the memory access even if CCR_S.TRD is zero + * and we aren't going to check what the data loaded is. + */ + uint32_t spdata, sp; + + /* + * We know we are currently NS, so the S stack pointers must be + * in other_ss_{psp,msp}, not in regs[13]/other_sp. + */ + sp = v7m_using_psp(env) ? env->v7m.other_ss_psp : env->v7m.other_ss_msp; + if (!v7m_read_sg_stack_word(cpu, mmu_idx, sp, &spdata)) { + /* Stack access failed and an exception has been pended */ + return false; + } + + if (env->v7m.ccr[M_REG_S] & R_V7M_CCR_TRD_MASK) { + if (((spdata & ~1) == 0xfefa125a) || + !(env->v7m.control[M_REG_S] & 1)) { + goto gen_invep; + } + } + } + env->regs[14] &= ~1; env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); -- 2.20.1 In commit 077d7449100d824a4 we added code to handle the v8M requirement that returns from NMI or HardFault forcibly deactivate those exceptions regardless of what interrupt the guest is trying to deactivate. Unfortunately this broke the handling of the "illegal exception return because the returning exception number is not active" check for those cases. In the pseudocode this test is done on the exception the guest asks to return from, but because our implementation was doing this in armv7m_nvic_complete_irq() after the new "deactivate NMI/HardFault regardless" code we ended up doing the test on the VecInfo for that exception instead, which usually meant failing to raise the illegal exception return fault. In the case for "configurable exception targeting the opposite security state" we detected the illegal-return case but went ahead and deactivated the VecInfo anyway, which is wrong because that is the VecInfo for the other security state. Rearrange the code so that we first identify the illegal return cases, then see if we really need to deactivate NMI or HardFault instead, and finally do the deactivation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-25-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 59 +++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 27 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; - int ret; + int ret = 0; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + trace_nvic_complete_irq(irq, secure); + + if (secure && exc_is_banked(irq)) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + + /* + * Identify illegal exception return cases. We can't immediately + * return at this point because we still need to deactivate + * (either this exception or NMI/HardFault) first. + */ + if (!exc_is_banked(irq) && exc_targets_secure(s, irq) != secure) { + /* + * Return from a configurable exception targeting the opposite + * security state from the one we're trying to complete it for. + * Clear vec because it's not really the VecInfo for this + * (irq, secstate) so we mustn't deactivate it. + */ + ret = -1; + vec = NULL; + } else if (!vec->active) { + /* Return from an inactive interrupt */ + ret = -1; + } else { + /* Legal return, we will return the RETTOBASE bit value to the caller */ + ret = nvic_rettobase(s); + } + /* * For negative priorities, v8M will forcibly deactivate the appropriate * NMI or HardFault regardless of what interrupt we're being asked to @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) } if (!vec) { - if (secure && exc_is_banked(irq)) { - vec = &s->sec_vectors[irq]; - } else { - vec = &s->vectors[irq]; - } - } - - trace_nvic_complete_irq(irq, secure); - - if (!vec->active) { - /* Tell the caller this was an illegal exception return */ - return -1; - } - - /* - * If this is a configurable exception and it is currently - * targeting the opposite security state from the one we're trying - * to complete it for, this counts as an illegal exception return. - * We still need to deactivate whatever vector the logic above has - * selected, though, as it might not be the same as the one for the - * requested exception number. - */ - if (!exc_is_banked(irq) && exc_targets_secure(s, irq) != secure) { - ret = -1; - } else { - ret = nvic_rettobase(s); + return ret; } vec->active = 0; -- 2.20.1 For v8.1M the architecture mandates that CPUs must provide at least the "minimal RAS implementation" from the Reliability, Availability and Serviceability extension. This consists of: * an ESB instruction which is a NOP -- since it is in the HINT space we need only add a comment * an RFSR register which will RAZ/WI * a RAZ/WI AIRCR.IESB bit -- the code which handles writes to AIRCR does not allow setting of RES0 bits, so we already treat this as RAZ/WI; add a comment noting that this is deliberate * minimal implementation of the RAS register block at 0xe0005000 -- this will be in a subsequent commit * setting the ID_PFR0.RAS field to 0b0010 -- we will do this when we add the Cortex-M55 CPU model Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-26-peter.maydell@linaro.org --- target/arm/cpu.h | 14 ++++++++++++++ target/arm/t32.decode | 4 ++++ hw/intc/armv7m_nvic.c | 13 +++++++++++++ 3 files changed, 31 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR4, LSM, 20, 4) FIELD(ID_MMFR4, CCIDX, 24, 4) FIELD(ID_MMFR4, EVT, 28, 4) +FIELD(ID_PFR0, STATE0, 0, 4) +FIELD(ID_PFR0, STATE1, 4, 4) +FIELD(ID_PFR0, STATE2, 8, 4) +FIELD(ID_PFR0, STATE3, 12, 4) +FIELD(ID_PFR0, CSV2, 16, 4) +FIELD(ID_PFR0, AMU, 20, 4) +FIELD(ID_PFR0, DIT, 24, 4) +FIELD(ID_PFR0, RAS, 28, 4) + FIELD(ID_PFR1, PROGMOD, 0, 4) FIELD(ID_PFR1, SECURITY, 4, 4) FIELD(ID_PFR1, MPROGMOD, 8, 4) @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_predinv(const ARMISARegisters *id) return FIELD_EX32(id->id_isar6, ID_ISAR6, SPECRES) != 0; } +static inline bool isar_feature_aa32_ras(const ARMISARegisters *id) +{ + return FIELD_EX32(id->id_pfr0, ID_PFR0, RAS) != 0; +} + static inline bool isar_feature_aa32_mprofile(const ARMISARegisters *id) { return FIELD_EX32(id->id_pfr1, ID_PFR1, MPROGMOD) != 0; diff --git a/target/arm/t32.decode b/target/arm/t32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/t32.decode +++ b/target/arm/t32.decode @@ -XXX,XX +XXX,XX @@ CLZ 1111 1010 1011 ---- 1111 .... 1000 .... @rdm # SEV 1111 0011 1010 1111 1000 0000 0000 0100 # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 + # For M-profile minimal-RAS ESB can be a NOP, which is the + # default behaviour since it is in the hint space. + # ESB 1111 0011 1010 1111 1000 0000 0001 0000 + # The canonical nop ends in 0000 0000, but the whole rest # of the space is "reserved hint, behaves as nop". NOP 1111 0011 1010 1111 1000 0000 ---- ---- diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf04: /* RFSR */ + if (!cpu_isar_feature(aa32_ras, cpu)) { + goto bad_offset; + } + /* We provide minimal-RAS only: RFSR is RAZ/WI */ + return 0; case 0xf34: /* FPCCR */ if (!cpu_isar_feature(aa32_vfp_simd, cpu)) { return 0; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, R_V7M_AIRCR_PRIGROUP_SHIFT, R_V7M_AIRCR_PRIGROUP_LENGTH); } + /* AIRCR.IESB is RAZ/WI because we implement only minimal RAS */ if (attrs.secure) { /* These bits are only writable by secure */ cpu->env.v7m.aircr = value & @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf04: /* RFSR */ + if (!cpu_isar_feature(aa32_ras, cpu)) { + goto bad_offset; + } + /* We provide minimal-RAS only: RFSR is RAZ/WI */ + break; case 0xf34: /* FPCCR */ if (cpu_isar_feature(aa32_vfp_simd, cpu)) { /* Not all bits here are banked. */ -- 2.20.1 The RAS feature has a block of memory-mapped registers at offset 0x5000 within the PPB. For a "minimal RAS" implementation we provide no error records and so the only registers that exist in the block are ERRIIDR and ERRDEVID. The "RAZ/WI for privileged, BusFault for nonprivileged" behaviour of the "nvic-default" region is actually valid for minimal-RAS, so the main benefit of providing an explicit implementation of the register block is more accurate LOG_UNIMP messages, and a framework for where we could add a real RAS implementation later if necessary. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-27-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 1 + hw/intc/armv7m_nvic.c | 56 +++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { MemoryRegion sysreg_ns_mem; MemoryRegion systickmem; MemoryRegion systick_ns_mem; + MemoryRegion ras_mem; MemoryRegion container; MemoryRegion defaultmem; diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps nvic_systick_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; + +static MemTxResult ras_read(void *opaque, hwaddr addr, + uint64_t *data, unsigned size, + MemTxAttrs attrs) +{ + if (attrs.user) { + return MEMTX_ERROR; + } + + switch (addr) { + case 0xe10: /* ERRIIDR */ + /* architect field = Arm; product/variant/revision 0 */ + *data = 0x43b; + break; + case 0xfc8: /* ERRDEVID */ + /* Minimal RAS: we implement 0 error record indexes */ + *data = 0; + break; + default: + qemu_log_mask(LOG_UNIMP, "Read RAS register offset 0x%x\n", + (uint32_t)addr); + *data = 0; + break; + } + return MEMTX_OK; +} + +static MemTxResult ras_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size, + MemTxAttrs attrs) +{ + if (attrs.user) { + return MEMTX_ERROR; + } + + switch (addr) { + default: + qemu_log_mask(LOG_UNIMP, "Write to RAS register offset 0x%x\n", + (uint32_t)addr); + break; + } + return MEMTX_OK; +} + +static const MemoryRegionOps ras_ops = { + .read_with_attrs = ras_read, + .write_with_attrs = ras_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + /* * Unassigned portions of the PPB space are RAZ/WI for privileged * accesses, and fault for non-privileged accesses. @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) &s->systick_ns_mem, 1); } + if (cpu_isar_feature(aa32_ras, s->cpu)) { + memory_region_init_io(&s->ras_mem, OBJECT(s), + &ras_ops, s, "nvic_ras", 0x1000); + memory_region_add_subregion(&s->container, 0x5000, &s->ras_mem); + } + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); } -- 2.20.1 Correct a typo in the name we give the NVIC object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-28-peter.maydell@linaro.org --- hw/arm/armv7m.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) memory_region_init(&s->container, obj, "armv7m-container", UINT64_MAX); - object_initialize_child(obj, "nvnic", &s->nvic, TYPE_NVIC); + object_initialize_child(obj, "nvic", &s->nvic, TYPE_NVIC); object_property_add_alias(obj, "num-irq", OBJECT(&s->nvic), "num-irq"); -- 2.20.1