The following changes since commit 61fee7f45955cd0bf9b79be9fa9c7ebabb5e6a85: Merge remote-tracking branch 'remotes/philmd-gitlab/tags/acceptance-testing-20200622' into staging (2020-06-22 20:50:10 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200623 for you to fetch changes up to 539533b85fbd269f777bed931de8ccae1dd837e9: arm/virt: Add memory hot remove support (2020-06-23 11:39:48 +0100) ---------------------------------------------------------------- target-arm queue: * util/oslib-posix : qemu_init_exec_dir implementation for Mac * target/arm: Last parts of neon decodetree conversion * hw/arm/virt: Add 5.0 HW compat props * hw/watchdog/cmsdk-apb-watchdog: Add trace event for lock status * mps2: Add CMSDK APB watchdog, FPGAIO block, S2I devices and I2C devices * mps2: Add some unimplemented-device stubs for audio and GPIO * mps2-tz: Use the ARM SBCon two-wire serial bus interface * target/arm: Check supported KVM features globally (not per vCPU) * tests/qtest/arm-cpu-features: Add feature setting tests * arm/virt: Add memory hot remove support ---------------------------------------------------------------- Andrew Jones (2): hw/arm/virt: Add 5.0 HW compat props tests/qtest/arm-cpu-features: Add feature setting tests David CARLIER (1): util/oslib-posix : qemu_init_exec_dir implementation for Mac Peter Maydell (23): target/arm: Convert Neon 2-reg-misc VREV64 to decodetree target/arm: Convert Neon 2-reg-misc pairwise ops to decodetree target/arm: Convert VZIP, VUZP to decodetree target/arm: Convert Neon narrowing moves to decodetree target/arm: Convert Neon 2-reg-misc VSHLL to decodetree target/arm: Convert Neon VCVT f16/f32 insns to decodetree target/arm: Convert vectorised 2-reg-misc Neon ops to decodetree target/arm: Convert Neon 2-reg-misc crypto operations to decodetree target/arm: Rename NeonGenOneOpFn to NeonGenOne64OpFn target/arm: Fix capitalization in NeonGenTwo{Single, Double}OPFn typedefs target/arm: Make gen_swap_half() take separate src and dest target/arm: Convert Neon 2-reg-misc VREV32 and VREV16 to decodetree target/arm: Convert remaining simple 2-reg-misc Neon ops target/arm: Convert Neon VQABS, VQNEG to decodetree target/arm: Convert simple fp Neon 2-reg-misc insns target/arm: Convert Neon 2-reg-misc fp-compare-with-zero insns to decodetree target/arm: Convert Neon 2-reg-misc VRINT insns to decodetree target/arm: Convert Neon 2-reg-misc VCVT insns to decodetree target/arm: Convert Neon VSWP to decodetree target/arm: Convert Neon VTRN to decodetree target/arm: Move some functions used only in translate-neon.inc.c to that file target/arm: Remove unnecessary gen_io_end() calls target/arm: Remove dead code relating to SABA and UABA Philippe Mathieu-Daudé (15): hw/watchdog/cmsdk-apb-watchdog: Add trace event for lock status hw/i2c/versatile_i2c: Add definitions for register addresses hw/i2c/versatile_i2c: Add SCL/SDA definitions hw/i2c: Add header for ARM SBCon two-wire serial bus interface hw/arm: Use TYPE_VERSATILE_I2C instead of hardcoded string hw/arm/mps2: Document CMSDK/FPGA APB subsystem sections hw/arm/mps2: Rename CMSDK AHB peripheral region hw/arm/mps2: Add CMSDK APB watchdog device hw/arm/mps2: Add CMSDK AHB GPIO peripherals as unimplemented devices hw/arm/mps2: Map the FPGA I/O block hw/arm/mps2: Add SPI devices hw/arm/mps2: Add I2C devices hw/arm/mps2: Add audio I2S interface as unimplemented device hw/arm/mps2-tz: Use the ARM SBCon two-wire serial bus interface target/arm: Check supported KVM features globally (not per vCPU) Shameer Kolothum (1): arm/virt: Add memory hot remove support include/hw/i2c/arm_sbcon_i2c.h | 35 ++ target/arm/cpu.h | 2 +- target/arm/kvm_arm.h | 21 +- target/arm/translate.h | 8 +- target/arm/neon-dp.decode | 106 ++++ hw/acpi/generic_event_device.c | 29 + hw/arm/mps2-tz.c | 23 +- hw/arm/mps2.c | 65 ++- hw/arm/realview.c | 3 +- hw/arm/versatilepb.c | 3 +- hw/arm/vexpress.c | 3 +- hw/arm/virt.c | 63 +- hw/i2c/versatile_i2c.c | 38 +- hw/watchdog/cmsdk-apb-watchdog.c | 1 + target/arm/cpu.c | 2 +- target/arm/cpu64.c | 10 +- target/arm/kvm.c | 4 +- target/arm/kvm64.c | 14 +- target/arm/translate-a64.c | 20 +- target/arm/translate-neon.inc.c | 1191 +++++++++++++++++++++++++++++++++++++- target/arm/translate-vfp.inc.c | 7 +- target/arm/translate.c | 1064 +--------------------------------- tests/qtest/arm-cpu-features.c | 38 +- util/oslib-posix.c | 15 + MAINTAINERS | 1 + hw/arm/Kconfig | 8 +- hw/watchdog/trace-events | 1 + 27 files changed, 1624 insertions(+), 1151 deletions(-) create mode 100644 include/hw/i2c/arm_sbcon_i2c.h From: Andrew Jones <drjones@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20200616140803.25515-1-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 1) static void virt_machine_5_0_options(MachineClass *mc) { virt_machine_5_1_options(mc); + compat_props_add(mc->compat_props, hw_compat_5_0, hw_compat_5_0_len); } DEFINE_VIRT_MACHINE(5, 0) -- 2.20.1 From: David CARLIER <devnexen@gmail.com> From 3025a0ce3fdf7d3559fc35a52c659f635f5c750c Mon Sep 17 00:00:00 2001 From: David Carlier <devnexen@gmail.com> Date: Tue, 26 May 2020 21:35:27 +0100 Subject: [PATCH] util/oslib-posix : qemu_init_exec_dir implementation for Mac Using dyld API to get the full path of the current process. Signed-off-by: David Carlier <devnexen@gmail.com> Message-id: CA+XhMqxwC10XHVs4Z-JfE0-WLAU3ztDuU9QKVi31mjr59HWCxg@mail.gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- util/oslib-posix.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/util/oslib-posix.c b/util/oslib-posix.c index XXXXXXX..XXXXXXX 100644 --- a/util/oslib-posix.c +++ b/util/oslib-posix.c @@ -XXX,XX +XXX,XX @@ #include <lwp.h> #endif +#ifdef __APPLE__ +#include <mach-o/dyld.h> +#endif + #include "qemu/mmap-alloc.h" #ifdef CONFIG_DEBUG_STACK_USAGE @@ -XXX,XX +XXX,XX @@ void qemu_init_exec_dir(const char *argv0) p = buf; } } +#elif defined(__APPLE__) + { + char fpath[PATH_MAX]; + uint32_t len = sizeof(fpath); + if (_NSGetExecutablePath(fpath, &len) == 0) { + p = realpath(fpath, buf); + if (!p) { + return; + } + } + } #endif /* If we don't have any way of figuring out the actual executable location then try argv[0]. */ -- 2.20.1 Convert the Neon VREV64 insn from the 2-reg-misc grouping to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-2-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 12 ++++++++ target/arm/translate-neon.inc.c | 50 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 24 ++-------------- 3 files changed, 64 insertions(+), 22 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm vm=%vm_dp vd=%vd_dp size=1 VDUP_scalar 1111 001 1 1 . 11 index:1 100 .... 11 000 q:1 . 0 .... \ vm=%vm_dp vd=%vd_dp size=2 + + ################################################################## + # 2-reg-misc grouping: + # 1111 001 11 D 11 size:2 opc1:2 Vd:4 0 opc2:4 q:1 M 0 Vm:4 + ################################################################## + + &2misc vd vm q size + + @2misc .... ... .. . .. size:2 .. .... . .... q:1 . . .... \ + &2misc vm=%vm_dp vd=%vd_dp + + VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP_scalar(DisasContext *s, arg_VDUP_scalar *a) a->q ? 16 : 8, a->q ? 16 : 8); return true; } + +static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) +{ + int pass, half; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (a->size == 3) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + for (pass = 0; pass < (a->q ? 2 : 1); pass++) { + TCGv_i32 tmp[2]; + + for (half = 0; half < 2; half++) { + tmp[half] = neon_load_reg(a->vm, pass * 2 + half); + switch (a->size) { + case 0: + tcg_gen_bswap32_i32(tmp[half], tmp[half]); + break; + case 1: + gen_swap_half(tmp[half]); + break; + case 2: + break; + default: + g_assert_not_reached(); + } + } + neon_store_reg(a->vd, pass * 2, tmp[1]); + neon_store_reg(a->vd, pass * 2 + 1, tmp[0]); + } + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } switch (op) { case NEON_2RM_VREV64: - for (pass = 0; pass < (q ? 2 : 1); pass++) { - tmp = neon_load_reg(rm, pass * 2); - tmp2 = neon_load_reg(rm, pass * 2 + 1); - switch (size) { - case 0: tcg_gen_bswap32_i32(tmp, tmp); break; - case 1: gen_swap_half(tmp); break; - case 2: /* no-op */ break; - default: abort(); - } - neon_store_reg(rd, pass * 2 + 1, tmp); - if (size == 2) { - neon_store_reg(rd, pass * 2, tmp2); - } else { - switch (size) { - case 0: tcg_gen_bswap32_i32(tmp2, tmp2); break; - case 1: gen_swap_half(tmp2); break; - default: abort(); - } - neon_store_reg(rd, pass * 2, tmp2); - } - } - break; + /* handled by decodetree */ + return 1; case NEON_2RM_VPADDL: case NEON_2RM_VPADDL_U: case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: for (pass = 0; pass < q + 1; pass++) { -- 2.20.1 Convert the pairwise ops VPADDL and VPADAL in the 2-reg-misc grouping to decodetree. At this point we can get rid of the weird CPU_V001 #define that was used to avoid having to explicitly list all the arguments being passed to some TCG gen/helper functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-3-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 6 ++ target/arm/translate-neon.inc.c | 149 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 35 +------- 3 files changed, 157 insertions(+), 33 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm &2misc vm=%vm_dp vd=%vd_dp VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc + + VPADDL_S 1111 001 11 . 11 .. 00 .... 0 0100 . . 0 .... @2misc + VPADDL_U 1111 001 11 . 11 .. 00 .... 0 0101 . . 0 .... @2misc + + VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc + VPADAL_U 1111 001 11 . 11 .. 00 .... 0 1101 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) } return true; } + +static bool do_2misc_pairwise(DisasContext *s, arg_2misc *a, + NeonGenWidenFn *widenfn, + NeonGenTwo64OpFn *opfn, + NeonGenTwo64OpFn *accfn) +{ + /* + * Pairwise long operations: widen both halves of the pair, + * combine the pairs with the opfn, and then possibly accumulate + * into the destination with the accfn. + */ + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!widenfn) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + for (pass = 0; pass < a->q + 1; pass++) { + TCGv_i32 tmp; + TCGv_i64 rm0_64, rm1_64, rd_64; + + rm0_64 = tcg_temp_new_i64(); + rm1_64 = tcg_temp_new_i64(); + rd_64 = tcg_temp_new_i64(); + tmp = neon_load_reg(a->vm, pass * 2); + widenfn(rm0_64, tmp); + tcg_temp_free_i32(tmp); + tmp = neon_load_reg(a->vm, pass * 2 + 1); + widenfn(rm1_64, tmp); + tcg_temp_free_i32(tmp); + opfn(rd_64, rm0_64, rm1_64); + tcg_temp_free_i64(rm0_64); + tcg_temp_free_i64(rm1_64); + + if (accfn) { + TCGv_i64 tmp64 = tcg_temp_new_i64(); + neon_load_reg64(tmp64, a->vd + pass); + accfn(rd_64, tmp64, rd_64); + tcg_temp_free_i64(tmp64); + } + neon_store_reg64(rd_64, a->vd + pass); + tcg_temp_free_i64(rd_64); + } + return true; +} + +static bool trans_VPADDL_S(DisasContext *s, arg_2misc *a) +{ + static NeonGenWidenFn * const widenfn[] = { + gen_helper_neon_widen_s8, + gen_helper_neon_widen_s16, + tcg_gen_ext_i32_i64, + NULL, + }; + static NeonGenTwo64OpFn * const opfn[] = { + gen_helper_neon_paddl_u16, + gen_helper_neon_paddl_u32, + tcg_gen_add_i64, + NULL, + }; + + return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], NULL); +} + +static bool trans_VPADDL_U(DisasContext *s, arg_2misc *a) +{ + static NeonGenWidenFn * const widenfn[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + NULL, + }; + static NeonGenTwo64OpFn * const opfn[] = { + gen_helper_neon_paddl_u16, + gen_helper_neon_paddl_u32, + tcg_gen_add_i64, + NULL, + }; + + return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], NULL); +} + +static bool trans_VPADAL_S(DisasContext *s, arg_2misc *a) +{ + static NeonGenWidenFn * const widenfn[] = { + gen_helper_neon_widen_s8, + gen_helper_neon_widen_s16, + tcg_gen_ext_i32_i64, + NULL, + }; + static NeonGenTwo64OpFn * const opfn[] = { + gen_helper_neon_paddl_u16, + gen_helper_neon_paddl_u32, + tcg_gen_add_i64, + NULL, + }; + static NeonGenTwo64OpFn * const accfn[] = { + gen_helper_neon_addl_u16, + gen_helper_neon_addl_u32, + tcg_gen_add_i64, + NULL, + }; + + return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], + accfn[a->size]); +} + +static bool trans_VPADAL_U(DisasContext *s, arg_2misc *a) +{ + static NeonGenWidenFn * const widenfn[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + NULL, + }; + static NeonGenTwo64OpFn * const opfn[] = { + gen_helper_neon_paddl_u16, + gen_helper_neon_paddl_u32, + tcg_gen_add_i64, + NULL, + }; + static NeonGenTwo64OpFn * const accfn[] = { + gen_helper_neon_addl_u16, + gen_helper_neon_addl_u32, + tcg_gen_add_i64, + NULL, + }; + + return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], + accfn[a->size]); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc) gen_rfe(s, pc, load_cpu_field(spsr)); } -#define CPU_V001 cpu_V0, cpu_V0, cpu_V1 - static int gen_neon_unzip(int rd, int rm, int size, int q) { TCGv_ptr pd, pm; @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) tcg_temp_free_i32(src); } -static inline void gen_neon_addl(int size) -{ - switch (size) { - case 0: gen_helper_neon_addl_u16(CPU_V001); break; - case 1: gen_helper_neon_addl_u32(CPU_V001); break; - case 2: tcg_gen_add_i64(CPU_V001); break; - default: abort(); - } -} - static void gen_neon_narrow_op(int op, int u, int size, TCGv_i32 dest, TCGv_i64 src) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } switch (op) { case NEON_2RM_VREV64: - /* handled by decodetree */ - return 1; case NEON_2RM_VPADDL: case NEON_2RM_VPADDL_U: case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: - for (pass = 0; pass < q + 1; pass++) { - tmp = neon_load_reg(rm, pass * 2); - gen_neon_widen(cpu_V0, tmp, size, op & 1); - tmp = neon_load_reg(rm, pass * 2 + 1); - gen_neon_widen(cpu_V1, tmp, size, op & 1); - switch (size) { - case 0: gen_helper_neon_paddl_u16(CPU_V001); break; - case 1: gen_helper_neon_paddl_u32(CPU_V001); break; - case 2: tcg_gen_add_i64(CPU_V001); break; - default: abort(); - } - if (op >= NEON_2RM_VPADAL) { - /* Accumulate. */ - neon_load_reg64(cpu_V1, rd + pass); - gen_neon_addl(size); - } - neon_store_reg64(cpu_V0, rd + pass); - } - break; + /* handled by decodetree */ + return 1; case NEON_2RM_VTRN: if (size == 2) { int n; -- 2.20.1 Convert the Neon VZIP and VUZP insns in the 2-reg-misc group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-4-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 3 ++ target/arm/translate-neon.inc.c | 74 ++++++++++++++++++++++++++ target/arm/translate.c | 92 +-------------------------------- 3 files changed, 79 insertions(+), 90 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc VPADAL_U 1111 001 11 . 11 .. 00 .... 0 1101 . . 0 .... @2misc + + VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc + VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VPADAL_U(DisasContext *s, arg_2misc *a) return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], accfn[a->size]); } + +typedef void ZipFn(TCGv_ptr, TCGv_ptr); + +static bool do_zip_uzp(DisasContext *s, arg_2misc *a, + ZipFn *fn) +{ + TCGv_ptr pd, pm; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!fn) { + /* Bad size or size/q combination */ + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + pd = vfp_reg_ptr(true, a->vd); + pm = vfp_reg_ptr(true, a->vm); + fn(pd, pm); + tcg_temp_free_ptr(pd); + tcg_temp_free_ptr(pm); + return true; +} + +static bool trans_VUZP(DisasContext *s, arg_2misc *a) +{ + static ZipFn * const fn[2][4] = { + { + gen_helper_neon_unzip8, + gen_helper_neon_unzip16, + NULL, + NULL, + }, { + gen_helper_neon_qunzip8, + gen_helper_neon_qunzip16, + gen_helper_neon_qunzip32, + NULL, + } + }; + return do_zip_uzp(s, a, fn[a->q][a->size]); +} + +static bool trans_VZIP(DisasContext *s, arg_2misc *a) +{ + static ZipFn * const fn[2][4] = { + { + gen_helper_neon_zip8, + gen_helper_neon_zip16, + NULL, + NULL, + }, { + gen_helper_neon_qzip8, + gen_helper_neon_qzip16, + gen_helper_neon_qzip32, + NULL, + } + }; + return do_zip_uzp(s, a, fn[a->q][a->size]); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc) gen_rfe(s, pc, load_cpu_field(spsr)); } -static int gen_neon_unzip(int rd, int rm, int size, int q) -{ - TCGv_ptr pd, pm; - - if (!q && size == 2) { - return 1; - } - pd = vfp_reg_ptr(true, rd); - pm = vfp_reg_ptr(true, rm); - if (q) { - switch (size) { - case 0: - gen_helper_neon_qunzip8(pd, pm); - break; - case 1: - gen_helper_neon_qunzip16(pd, pm); - break; - case 2: - gen_helper_neon_qunzip32(pd, pm); - break; - default: - abort(); - } - } else { - switch (size) { - case 0: - gen_helper_neon_unzip8(pd, pm); - break; - case 1: - gen_helper_neon_unzip16(pd, pm); - break; - default: - abort(); - } - } - tcg_temp_free_ptr(pd); - tcg_temp_free_ptr(pm); - return 0; -} - -static int gen_neon_zip(int rd, int rm, int size, int q) -{ - TCGv_ptr pd, pm; - - if (!q && size == 2) { - return 1; - } - pd = vfp_reg_ptr(true, rd); - pm = vfp_reg_ptr(true, rm); - if (q) { - switch (size) { - case 0: - gen_helper_neon_qzip8(pd, pm); - break; - case 1: - gen_helper_neon_qzip16(pd, pm); - break; - case 2: - gen_helper_neon_qzip32(pd, pm); - break; - default: - abort(); - } - } else { - switch (size) { - case 0: - gen_helper_neon_zip8(pd, pm); - break; - case 1: - gen_helper_neon_zip16(pd, pm); - break; - default: - abort(); - } - } - tcg_temp_free_ptr(pd); - tcg_temp_free_ptr(pm); - return 0; -} - static void gen_neon_trn_u8(TCGv_i32 t0, TCGv_i32 t1) { TCGv_i32 rd, tmp; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VREV64: case NEON_2RM_VPADDL: case NEON_2RM_VPADDL_U: case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: + case NEON_2RM_VUZP: + case NEON_2RM_VZIP: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_VUZP: - if (gen_neon_unzip(rd, rm, size, q)) { - return 1; - } - break; - case NEON_2RM_VZIP: - if (gen_neon_zip(rd, rm, size, q)) { - return 1; - } - break; case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: /* also VQMOVUN; op field and mnemonics don't line up */ if (rm & 1) { -- 2.20.1 Convert the Neon narrowing moves VMQNV, VQMOVN, VQMOVUN in the 2-reg-misc group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-5-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 9 ++++ target/arm/translate-neon.inc.c | 59 ++++++++++++++++++++++++ target/arm/translate.c | 81 +-------------------------------- 3 files changed, 70 insertions(+), 79 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm @2misc .... ... .. . .. size:2 .. .... . .... q:1 . . .... \ &2misc vm=%vm_dp vd=%vd_dp + @2misc_q0 .... ... .. . .. size:2 .. .... . .... . . . .... \ + &2misc vm=%vm_dp vd=%vd_dp q=0 VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc + + VMOVN 1111 001 11 . 11 .. 10 .... 0 0100 0 . 0 .... @2misc_q0 + # VQMOVUN: unsigned result (source is always signed) + VQMOVUN 1111 001 11 . 11 .. 10 .... 0 0100 1 . 0 .... @2misc_q0 + # VQMOVN: signed result, source may be signed (_S) or unsigned (_U) + VQMOVN_S 1111 001 11 . 11 .. 10 .... 0 0101 0 . 0 .... @2misc_q0 + VQMOVN_U 1111 001 11 . 11 .. 10 .... 0 0101 1 . 0 .... @2misc_q0 ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VZIP(DisasContext *s, arg_2misc *a) }; return do_zip_uzp(s, a, fn[a->q][a->size]); } + +static bool do_vmovn(DisasContext *s, arg_2misc *a, + NeonGenNarrowEnvFn *narrowfn) +{ + TCGv_i64 rm; + TCGv_i32 rd0, rd1; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!narrowfn) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + rm = tcg_temp_new_i64(); + rd0 = tcg_temp_new_i32(); + rd1 = tcg_temp_new_i32(); + + neon_load_reg64(rm, a->vm); + narrowfn(rd0, cpu_env, rm); + neon_load_reg64(rm, a->vm + 1); + narrowfn(rd1, cpu_env, rm); + neon_store_reg(a->vd, 0, rd0); + neon_store_reg(a->vd, 1, rd1); + tcg_temp_free_i64(rm); + return true; +} + +#define DO_VMOVN(INSN, FUNC) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + static NeonGenNarrowEnvFn * const narrowfn[] = { \ + FUNC##8, \ + FUNC##16, \ + FUNC##32, \ + NULL, \ + }; \ + return do_vmovn(s, a, narrowfn[a->size]); \ + } + +DO_VMOVN(VMOVN, gen_neon_narrow_u) +DO_VMOVN(VQMOVUN, gen_helper_neon_unarrow_sat) +DO_VMOVN(VQMOVN_S, gen_helper_neon_narrow_sat_s) +DO_VMOVN(VQMOVN_U, gen_helper_neon_narrow_sat_u) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) tcg_temp_free_i32(rd); } -static inline void gen_neon_narrow(int size, TCGv_i32 dest, TCGv_i64 src) -{ - switch (size) { - case 0: gen_helper_neon_narrow_u8(dest, src); break; - case 1: gen_helper_neon_narrow_u16(dest, src); break; - case 2: tcg_gen_extrl_i64_i32(dest, src); break; - default: abort(); - } -} - -static inline void gen_neon_narrow_sats(int size, TCGv_i32 dest, TCGv_i64 src) -{ - switch (size) { - case 0: gen_helper_neon_narrow_sat_s8(dest, cpu_env, src); break; - case 1: gen_helper_neon_narrow_sat_s16(dest, cpu_env, src); break; - case 2: gen_helper_neon_narrow_sat_s32(dest, cpu_env, src); break; - default: abort(); - } -} - -static inline void gen_neon_narrow_satu(int size, TCGv_i32 dest, TCGv_i64 src) -{ - switch (size) { - case 0: gen_helper_neon_narrow_sat_u8(dest, cpu_env, src); break; - case 1: gen_helper_neon_narrow_sat_u16(dest, cpu_env, src); break; - case 2: gen_helper_neon_narrow_sat_u32(dest, cpu_env, src); break; - default: abort(); - } -} - -static inline void gen_neon_unarrow_sats(int size, TCGv_i32 dest, TCGv_i64 src) -{ - switch (size) { - case 0: gen_helper_neon_unarrow_sat8(dest, cpu_env, src); break; - case 1: gen_helper_neon_unarrow_sat16(dest, cpu_env, src); break; - case 2: gen_helper_neon_unarrow_sat32(dest, cpu_env, src); break; - default: abort(); - } -} - static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) { if (u) { @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) tcg_temp_free_i32(src); } -static void gen_neon_narrow_op(int op, int u, int size, - TCGv_i32 dest, TCGv_i64 src) -{ - if (op) { - if (u) { - gen_neon_unarrow_sats(size, dest, src); - } else { - gen_neon_narrow(size, dest, src); - } - } else { - if (u) { - gen_neon_narrow_satu(size, dest, src); - } else { - gen_neon_narrow_sats(size, dest, src); - } - } -} - /* Symbolic constants for op fields for Neon 2-register miscellaneous. * The values correspond to bits [17:16,10:7]; see the ARM ARM DDI0406B * table A7-13. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) !arm_dc_feature(s, ARM_FEATURE_V8)) { return 1; } - if ((op != NEON_2RM_VMOVN && op != NEON_2RM_VQMOVN) && - q && ((rm | rd) & 1)) { + if (q && ((rm | rd) & 1)) { return 1; } switch (op) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: case NEON_2RM_VUZP: case NEON_2RM_VZIP: + case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: - /* also VQMOVUN; op field and mnemonics don't line up */ - if (rm & 1) { - return 1; - } - tmp2 = NULL; - for (pass = 0; pass < 2; pass++) { - neon_load_reg64(cpu_V0, rm + pass); - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == NEON_2RM_VMOVN, q, size, - tmp, cpu_V0); - if (pass == 0) { - tmp2 = tmp; - } else { - neon_store_reg(rd, 0, tmp2); - neon_store_reg(rd, 1, tmp); - } - } - break; case NEON_2RM_VSHLL: if (q || (rd & 1)) { return 1; -- 2.20.1 Convert the VSHLL insn in the 2-reg-misc Neon group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-6-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 2 ++ target/arm/translate-neon.inc.c | 52 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 35 +--------------------- 3 files changed, 55 insertions(+), 34 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm # VQMOVN: signed result, source may be signed (_S) or unsigned (_U) VQMOVN_S 1111 001 11 . 11 .. 10 .... 0 0101 0 . 0 .... @2misc_q0 VQMOVN_U 1111 001 11 . 11 .. 10 .... 0 0101 1 . 0 .... @2misc_q0 + + VSHLL 1111 001 11 . 11 .. 10 .... 0 0110 0 . 0 .... @2misc_q0 ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_VMOVN(VMOVN, gen_neon_narrow_u) DO_VMOVN(VQMOVUN, gen_helper_neon_unarrow_sat) DO_VMOVN(VQMOVN_S, gen_helper_neon_narrow_sat_s) DO_VMOVN(VQMOVN_U, gen_helper_neon_narrow_sat_u) + +static bool trans_VSHLL(DisasContext *s, arg_2misc *a) +{ + TCGv_i32 rm0, rm1; + TCGv_i64 rd; + static NeonGenWidenFn * const widenfns[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + NULL, + }; + NeonGenWidenFn *widenfn = widenfns[a->size]; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vd & 1) { + return false; + } + + if (!widenfn) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + rd = tcg_temp_new_i64(); + + rm0 = neon_load_reg(a->vm, 0); + rm1 = neon_load_reg(a->vm, 1); + + widenfn(rd, rm0); + tcg_gen_shli_i64(rd, rd, 8 << a->size); + neon_store_reg64(rd, a->vd); + widenfn(rd, rm1); + tcg_gen_shli_i64(rd, rd, 8 << a->size); + neon_store_reg64(rd, a->vd + 1); + + tcg_temp_free_i64(rd); + tcg_temp_free_i32(rm0); + tcg_temp_free_i32(rm1); + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) tcg_temp_free_i32(rd); } -static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) -{ - if (u) { - switch (size) { - case 0: gen_helper_neon_widen_u8(dest, src); break; - case 1: gen_helper_neon_widen_u16(dest, src); break; - case 2: tcg_gen_extu_i32_i64(dest, src); break; - default: abort(); - } - } else { - switch (size) { - case 0: gen_helper_neon_widen_s8(dest, src); break; - case 1: gen_helper_neon_widen_s16(dest, src); break; - case 2: tcg_gen_ext_i32_i64(dest, src); break; - default: abort(); - } - } - tcg_temp_free_i32(src); -} - /* Symbolic constants for op fields for Neon 2-register miscellaneous. * The values correspond to bits [17:16,10:7]; see the ARM ARM DDI0406B * table A7-13. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VUZP: case NEON_2RM_VZIP: case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: + case NEON_2RM_VSHLL: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_VSHLL: - if (q || (rd & 1)) { - return 1; - } - tmp = neon_load_reg(rm, 0); - tmp2 = neon_load_reg(rm, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 1) - tmp = tmp2; - gen_neon_widen(cpu_V0, tmp, size, 1); - tcg_gen_shli_i64(cpu_V0, cpu_V0, 8 << size); - neon_store_reg64(cpu_V0, rd + pass); - } - break; case NEON_2RM_VCVT_F16_F32: { TCGv_ptr fpst; -- 2.20.1 Convert the Neon insns in the 2-reg-misc group which are VCVT between f32 and f16 to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-7-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 3 ++ target/arm/translate-neon.inc.c | 96 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 65 ++-------------------- 3 files changed, 102 insertions(+), 62 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VQMOVN_U 1111 001 11 . 11 .. 10 .... 0 0101 1 . 0 .... @2misc_q0 VSHLL 1111 001 11 . 11 .. 10 .... 0 0110 0 . 0 .... @2misc_q0 + + VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 + VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL(DisasContext *s, arg_2misc *a) tcg_temp_free_i32(rm1); return true; } + +static bool trans_VCVT_F16_F32(DisasContext *s, arg_2misc *a) +{ + TCGv_ptr fpst; + TCGv_i32 ahp, tmp, tmp2, tmp3; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON) || + !dc_isar_feature(aa32_fp16_spconv, s)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm & 1) || (a->size != 1)) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(true); + ahp = get_ahp_flag(); + tmp = neon_load_reg(a->vm, 0); + gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); + tmp2 = neon_load_reg(a->vm, 1); + gen_helper_vfp_fcvt_f32_to_f16(tmp2, tmp2, fpst, ahp); + tcg_gen_shli_i32(tmp2, tmp2, 16); + tcg_gen_or_i32(tmp2, tmp2, tmp); + tcg_temp_free_i32(tmp); + tmp = neon_load_reg(a->vm, 2); + gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); + tmp3 = neon_load_reg(a->vm, 3); + neon_store_reg(a->vd, 0, tmp2); + gen_helper_vfp_fcvt_f32_to_f16(tmp3, tmp3, fpst, ahp); + tcg_gen_shli_i32(tmp3, tmp3, 16); + tcg_gen_or_i32(tmp3, tmp3, tmp); + neon_store_reg(a->vd, 1, tmp3); + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(ahp); + tcg_temp_free_ptr(fpst); + + return true; +} + +static bool trans_VCVT_F32_F16(DisasContext *s, arg_2misc *a) +{ + TCGv_ptr fpst; + TCGv_i32 ahp, tmp, tmp2, tmp3; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON) || + !dc_isar_feature(aa32_fp16_spconv, s)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd & 1) || (a->size != 1)) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(true); + ahp = get_ahp_flag(); + tmp3 = tcg_temp_new_i32(); + tmp = neon_load_reg(a->vm, 0); + tmp2 = neon_load_reg(a->vm, 1); + tcg_gen_ext16u_i32(tmp3, tmp); + gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); + neon_store_reg(a->vd, 0, tmp3); + tcg_gen_shri_i32(tmp, tmp, 16); + gen_helper_vfp_fcvt_f16_to_f32(tmp, tmp, fpst, ahp); + neon_store_reg(a->vd, 1, tmp); + tmp3 = tcg_temp_new_i32(); + tcg_gen_ext16u_i32(tmp3, tmp2); + gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); + neon_store_reg(a->vd, 2, tmp3); + tcg_gen_shri_i32(tmp2, tmp2, 16); + gen_helper_vfp_fcvt_f16_to_f32(tmp2, tmp2, fpst, ahp); + neon_store_reg(a->vd, 3, tmp2); + tcg_temp_free_i32(ahp); + tcg_temp_free_ptr(fpst); + + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int pass; int u; int vec_size; - TCGv_i32 tmp, tmp2, tmp3; + TCGv_i32 tmp, tmp2; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return 1; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VZIP: case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: case NEON_2RM_VSHLL: + case NEON_2RM_VCVT_F16_F32: + case NEON_2RM_VCVT_F32_F16: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_VCVT_F16_F32: - { - TCGv_ptr fpst; - TCGv_i32 ahp; - - if (!dc_isar_feature(aa32_fp16_spconv, s) || - q || (rm & 1)) { - return 1; - } - fpst = get_fpstatus_ptr(true); - ahp = get_ahp_flag(); - tmp = neon_load_reg(rm, 0); - gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); - tmp2 = neon_load_reg(rm, 1); - gen_helper_vfp_fcvt_f32_to_f16(tmp2, tmp2, fpst, ahp); - tcg_gen_shli_i32(tmp2, tmp2, 16); - tcg_gen_or_i32(tmp2, tmp2, tmp); - tcg_temp_free_i32(tmp); - tmp = neon_load_reg(rm, 2); - gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); - tmp3 = neon_load_reg(rm, 3); - neon_store_reg(rd, 0, tmp2); - gen_helper_vfp_fcvt_f32_to_f16(tmp3, tmp3, fpst, ahp); - tcg_gen_shli_i32(tmp3, tmp3, 16); - tcg_gen_or_i32(tmp3, tmp3, tmp); - neon_store_reg(rd, 1, tmp3); - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(ahp); - tcg_temp_free_ptr(fpst); - break; - } - case NEON_2RM_VCVT_F32_F16: - { - TCGv_ptr fpst; - TCGv_i32 ahp; - if (!dc_isar_feature(aa32_fp16_spconv, s) || - q || (rd & 1)) { - return 1; - } - fpst = get_fpstatus_ptr(true); - ahp = get_ahp_flag(); - tmp3 = tcg_temp_new_i32(); - tmp = neon_load_reg(rm, 0); - tmp2 = neon_load_reg(rm, 1); - tcg_gen_ext16u_i32(tmp3, tmp); - gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); - neon_store_reg(rd, 0, tmp3); - tcg_gen_shri_i32(tmp, tmp, 16); - gen_helper_vfp_fcvt_f16_to_f32(tmp, tmp, fpst, ahp); - neon_store_reg(rd, 1, tmp); - tmp3 = tcg_temp_new_i32(); - tcg_gen_ext16u_i32(tmp3, tmp2); - gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); - neon_store_reg(rd, 2, tmp3); - tcg_gen_shri_i32(tmp2, tmp2, 16); - gen_helper_vfp_fcvt_f16_to_f32(tmp2, tmp2, fpst, ahp); - neon_store_reg(rd, 3, tmp2); - tcg_temp_free_i32(ahp); - tcg_temp_free_ptr(fpst); - break; - } case NEON_2RM_AESE: case NEON_2RM_AESMC: if (!dc_isar_feature(aa32_aes, s) || ((rm | rd) & 1)) { return 1; -- 2.20.1 Convert to decodetree the insns in the Neon 2-reg-misc grouping which we implement using gvec. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-8-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 11 +++++++ target/arm/translate-neon.inc.c | 55 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 35 +++++---------------- 3 files changed, 74 insertions(+), 27 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VPADDL_S 1111 001 11 . 11 .. 00 .... 0 0100 . . 0 .... @2misc VPADDL_U 1111 001 11 . 11 .. 00 .... 0 0101 . . 0 .... @2misc + VMVN 1111 001 11 . 11 .. 00 .... 0 1011 . . 0 .... @2misc + VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc VPADAL_U 1111 001 11 . 11 .. 00 .... 0 1101 . . 0 .... @2misc + VCGT0 1111 001 11 . 11 .. 01 .... 0 0000 . . 0 .... @2misc + VCGE0 1111 001 11 . 11 .. 01 .... 0 0001 . . 0 .... @2misc + VCEQ0 1111 001 11 . 11 .. 01 .... 0 0010 . . 0 .... @2misc + VCLE0 1111 001 11 . 11 .. 01 .... 0 0011 . . 0 .... @2misc + VCLT0 1111 001 11 . 11 .. 01 .... 0 0100 . . 0 .... @2misc + + VABS 1111 001 11 . 11 .. 01 .... 0 0110 . . 0 .... @2misc + VNEG 1111 001 11 . 11 .. 01 .... 0 0111 . . 0 .... @2misc + VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_F32_F16(DisasContext *s, arg_2misc *a) return true; } + +static bool do_2misc_vec(DisasContext *s, arg_2misc *a, GVecGen2Fn *fn) +{ + int vec_size = a->q ? 16 : 8; + int rd_ofs = neon_reg_offset(a->vd, 0); + int rm_ofs = neon_reg_offset(a->vm, 0); + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size == 3) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fn(a->size, rd_ofs, rm_ofs, vec_size, vec_size); + + return true; +} + +#define DO_2MISC_VEC(INSN, FN) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_2misc_vec(s, a, FN); \ + } + +DO_2MISC_VEC(VNEG, tcg_gen_gvec_neg) +DO_2MISC_VEC(VABS, tcg_gen_gvec_abs) +DO_2MISC_VEC(VCEQ0, gen_gvec_ceq0) +DO_2MISC_VEC(VCGT0, gen_gvec_cgt0) +DO_2MISC_VEC(VCLE0, gen_gvec_cle0) +DO_2MISC_VEC(VCGE0, gen_gvec_cge0) +DO_2MISC_VEC(VCLT0, gen_gvec_clt0) + +static bool trans_VMVN(DisasContext *s, arg_2misc *a) +{ + if (a->size != 0) { + return false; + } + return do_2misc_vec(s, a, tcg_gen_gvec_not); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int size; int pass; int u; - int vec_size; TCGv_i32 tmp, tmp2; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) VFP_DREG_D(rd, insn); VFP_DREG_M(rm, insn); size = (insn >> 20) & 3; - vec_size = q ? 16 : 8; rd_ofs = neon_reg_offset(rd, 0); rm_ofs = neon_reg_offset(rm, 0); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VSHLL: case NEON_2RM_VCVT_F16_F32: case NEON_2RM_VCVT_F32_F16: + case NEON_2RM_VMVN: + case NEON_2RM_VNEG: + case NEON_2RM_VABS: + case NEON_2RM_VCEQ0: + case NEON_2RM_VCGT0: + case NEON_2RM_VCLE0: + case NEON_2RM_VCGE0: + case NEON_2RM_VCLT0: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) q ? gen_helper_crypto_sha256su0 : gen_helper_crypto_sha1su1); break; - case NEON_2RM_VMVN: - tcg_gen_gvec_not(0, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VNEG: - tcg_gen_gvec_neg(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VABS: - tcg_gen_gvec_abs(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - - case NEON_2RM_VCEQ0: - gen_gvec_ceq0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VCGT0: - gen_gvec_cgt0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VCLE0: - gen_gvec_cle0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VCGE0: - gen_gvec_cge0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VCLT0: - gen_gvec_clt0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; default: elementwise: -- 2.20.1 Convert the Neon-2-reg misc crypto ops (AESE, AESMC, SHA1H, SHA1SU1) to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-9-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 12 ++++++++ target/arm/translate-neon.inc.c | 42 ++++++++++++++++++++++++++ target/arm/translate.c | 52 +++------------------------------ 3 files changed, 58 insertions(+), 48 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm &2misc vm=%vm_dp vd=%vd_dp @2misc_q0 .... ... .. . .. size:2 .. .... . .... . . . .... \ &2misc vm=%vm_dp vd=%vd_dp q=0 + @2misc_q1 .... ... .. . .. size:2 .. .... . .... . . . .... \ + &2misc vm=%vm_dp vd=%vd_dp q=1 VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc VPADDL_S 1111 001 11 . 11 .. 00 .... 0 0100 . . 0 .... @2misc VPADDL_U 1111 001 11 . 11 .. 00 .... 0 0101 . . 0 .... @2misc + AESE 1111 001 11 . 11 .. 00 .... 0 0110 0 . 0 .... @2misc_q1 + AESD 1111 001 11 . 11 .. 00 .... 0 0110 1 . 0 .... @2misc_q1 + AESMC 1111 001 11 . 11 .. 00 .... 0 0111 0 . 0 .... @2misc_q1 + AESIMC 1111 001 11 . 11 .. 00 .... 0 0111 1 . 0 .... @2misc_q1 + VMVN 1111 001 11 . 11 .. 00 .... 0 1011 . . 0 .... @2misc VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VCLE0 1111 001 11 . 11 .. 01 .... 0 0011 . . 0 .... @2misc VCLT0 1111 001 11 . 11 .. 01 .... 0 0100 . . 0 .... @2misc + SHA1H 1111 001 11 . 11 .. 01 .... 0 0101 1 . 0 .... @2misc_q1 + VABS 1111 001 11 . 11 .. 01 .... 0 0110 . . 0 .... @2misc VNEG 1111 001 11 . 11 .. 01 .... 0 0111 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VSHLL 1111 001 11 . 11 .. 10 .... 0 0110 0 . 0 .... @2misc_q0 + SHA1SU1 1111 001 11 . 11 .. 10 .... 0 0111 0 . 0 .... @2misc_q1 + SHA256SU0 1111 001 11 . 11 .. 10 .... 0 0111 1 . 0 .... @2misc_q1 + VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 ] diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMVN(DisasContext *s, arg_2misc *a) } return do_2misc_vec(s, a, tcg_gen_gvec_not); } + +#define WRAP_2M_3_OOL_FN(WRAPNAME, FUNC, DATA) \ + static void WRAPNAME(unsigned vece, uint32_t rd_ofs, \ + uint32_t rm_ofs, uint32_t oprsz, \ + uint32_t maxsz) \ + { \ + tcg_gen_gvec_3_ool(rd_ofs, rd_ofs, rm_ofs, oprsz, maxsz, \ + DATA, FUNC); \ + } + +#define WRAP_2M_2_OOL_FN(WRAPNAME, FUNC, DATA) \ + static void WRAPNAME(unsigned vece, uint32_t rd_ofs, \ + uint32_t rm_ofs, uint32_t oprsz, \ + uint32_t maxsz) \ + { \ + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, oprsz, maxsz, DATA, FUNC); \ + } + +WRAP_2M_3_OOL_FN(gen_AESE, gen_helper_crypto_aese, 0) +WRAP_2M_3_OOL_FN(gen_AESD, gen_helper_crypto_aese, 1) +WRAP_2M_2_OOL_FN(gen_AESMC, gen_helper_crypto_aesmc, 0) +WRAP_2M_2_OOL_FN(gen_AESIMC, gen_helper_crypto_aesmc, 1) +WRAP_2M_2_OOL_FN(gen_SHA1H, gen_helper_crypto_sha1h, 0) +WRAP_2M_2_OOL_FN(gen_SHA1SU1, gen_helper_crypto_sha1su1, 0) +WRAP_2M_2_OOL_FN(gen_SHA256SU0, gen_helper_crypto_sha256su0, 0) + +#define DO_2M_CRYPTO(INSN, FEATURE, SIZE) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + if (!dc_isar_feature(FEATURE, s) || a->size != SIZE) { \ + return false; \ + } \ + return do_2misc_vec(s, a, gen_##INSN); \ + } + +DO_2M_CRYPTO(AESE, aa32_aes, 0) +DO_2M_CRYPTO(AESD, aa32_aes, 0) +DO_2M_CRYPTO(AESMC, aa32_aes, 0) +DO_2M_CRYPTO(AESIMC, aa32_aes, 0) +DO_2M_CRYPTO(SHA1H, aa32_sha1, 2) +DO_2M_CRYPTO(SHA1SU1, aa32_sha1, 2) +DO_2M_CRYPTO(SHA256SU0, aa32_sha2, 2) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) { int op; int q; - int rd, rm, rd_ofs, rm_ofs; + int rd, rm; int size; int pass; int u; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) VFP_DREG_D(rd, insn); VFP_DREG_M(rm, insn); size = (insn >> 20) & 3; - rd_ofs = neon_reg_offset(rd, 0); - rm_ofs = neon_reg_offset(rm, 0); if ((insn & (1 << 23)) == 0) { /* Three register same length: handled by decodetree */ @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VCLE0: case NEON_2RM_VCGE0: case NEON_2RM_VCLT0: + case NEON_2RM_AESE: case NEON_2RM_AESMC: + case NEON_2RM_SHA1H: + case NEON_2RM_SHA1SU1: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_AESE: case NEON_2RM_AESMC: - if (!dc_isar_feature(aa32_aes, s) || ((rm | rd) & 1)) { - return 1; - } - /* - * Bit 6 is the lowest opcode bit; it distinguishes - * between encryption (AESE/AESMC) and decryption - * (AESD/AESIMC). - */ - if (op == NEON_2RM_AESE) { - tcg_gen_gvec_3_ool(vfp_reg_offset(true, rd), - vfp_reg_offset(true, rd), - vfp_reg_offset(true, rm), - 16, 16, extract32(insn, 6, 1), - gen_helper_crypto_aese); - } else { - tcg_gen_gvec_2_ool(vfp_reg_offset(true, rd), - vfp_reg_offset(true, rm), - 16, 16, extract32(insn, 6, 1), - gen_helper_crypto_aesmc); - } - break; - case NEON_2RM_SHA1H: - if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { - return 1; - } - tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, - gen_helper_crypto_sha1h); - break; - case NEON_2RM_SHA1SU1: - if ((rm | rd) & 1) { - return 1; - } - /* bit 6 (q): set -> SHA256SU0, cleared -> SHA1SU1 */ - if (q) { - if (!dc_isar_feature(aa32_sha2, s)) { - return 1; - } - } else if (!dc_isar_feature(aa32_sha1, s)) { - return 1; - } - tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, - q ? gen_helper_crypto_sha256su0 - : gen_helper_crypto_sha1su1); - break; default: elementwise: -- 2.20.1 The NeonGenOneOpFn typedef breaks with the pattern of the other NeonGen*Fn typedefs, because it is a TCGv_i64 -> TCGv_i64 operation but it does not have '64' in its name. Rename it to NeonGenOne64OpFn, so that the old name is available for a TCGv_i32 -> TCGv_i32 operation (which we will need in a subsequent commit). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-10-peter.maydell@linaro.org --- target/arm/translate.h | 2 +- target/arm/translate-a64.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void NeonGenWidenFn(TCGv_i64, TCGv_i32); typedef void NeonGenTwoOpWidenFn(TCGv_i64, TCGv_i32, TCGv_i32); typedef void NeonGenTwoSingleOPFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr); typedef void NeonGenTwoDoubleOPFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGv_ptr); -typedef void NeonGenOneOpFn(TCGv_i64, TCGv_i64); +typedef void NeonGenOne64OpFn(TCGv_i64, TCGv_i64); typedef void CryptoTwoOpFn(TCGv_ptr, TCGv_ptr); typedef void CryptoThreeOpIntFn(TCGv_ptr, TCGv_ptr, TCGv_i32); typedef void CryptoThreeOpFn(TCGv_ptr, TCGv_ptr, TCGv_ptr); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_2misc_pairwise(DisasContext *s, int opcode, bool u, } else { for (pass = 0; pass < maxpass; pass++) { TCGv_i64 tcg_op = tcg_temp_new_i64(); - NeonGenOneOpFn *genfn; - static NeonGenOneOpFn * const fns[2][2] = { + NeonGenOne64OpFn *genfn; + static NeonGenOne64OpFn * const fns[2][2] = { { gen_helper_neon_addlp_s8, gen_helper_neon_addlp_u8 }, { gen_helper_neon_addlp_s16, gen_helper_neon_addlp_u16 }, }; -- 2.20.1 All the other typedefs like these spell "Op" with a lowercase 'p'; remane the NeonGenTwoSingleOPFn and NeonGenTwoDoubleOPFn typedefs to match. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-11-peter.maydell@linaro.org --- target/arm/translate.h | 4 ++-- target/arm/translate-a64.c | 4 ++-- target/arm/translate-neon.inc.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void NeonGenNarrowFn(TCGv_i32, TCGv_i64); typedef void NeonGenNarrowEnvFn(TCGv_i32, TCGv_ptr, TCGv_i64); typedef void NeonGenWidenFn(TCGv_i64, TCGv_i32); typedef void NeonGenTwoOpWidenFn(TCGv_i64, TCGv_i32, TCGv_i32); -typedef void NeonGenTwoSingleOPFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr); -typedef void NeonGenTwoDoubleOPFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGv_ptr); +typedef void NeonGenTwoSingleOpFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr); +typedef void NeonGenTwoDoubleOpFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGv_ptr); typedef void NeonGenOne64OpFn(TCGv_i64, TCGv_i64); typedef void CryptoTwoOpFn(TCGv_ptr, TCGv_ptr); typedef void CryptoThreeOpIntFn(TCGv_ptr, TCGv_ptr, TCGv_i32); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, TCGv_i64 tcg_op = tcg_temp_new_i64(); TCGv_i64 tcg_zero = tcg_const_i64(0); TCGv_i64 tcg_res = tcg_temp_new_i64(); - NeonGenTwoDoubleOPFn *genfn; + NeonGenTwoDoubleOpFn *genfn; bool swap = false; int pass; @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, TCGv_i32 tcg_op = tcg_temp_new_i32(); TCGv_i32 tcg_zero = tcg_const_i32(0); TCGv_i32 tcg_res = tcg_temp_new_i32(); - NeonGenTwoSingleOPFn *genfn; + NeonGenTwoSingleOpFn *genfn; bool swap = false; int pass, maxpasses; diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) } static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a, - NeonGenTwoSingleOPFn *fn) + NeonGenTwoSingleOpFn *fn) { /* FP operations in 2-reg-and-shift group */ TCGv_i32 tmp, shiftv; -- 2.20.1 Make gen_swap_half() take a source and destination TCGv_i32 rather than modifying the input TCGv_i32; we're going to want to be able to use it with the more flexible function signature, and this also brings it into line with other functions like gen_rev16() and gen_revsh(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-12-peter.maydell@linaro.org --- target/arm/translate-neon.inc.c | 2 +- target/arm/translate.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) tcg_gen_bswap32_i32(tmp[half], tmp[half]); break; case 1: - gen_swap_half(tmp[half]); + gen_swap_half(tmp[half], tmp[half]); break; case 2: break; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_revsh(TCGv_i32 dest, TCGv_i32 var) } /* Swap low and high halfwords. */ -static void gen_swap_half(TCGv_i32 var) +static void gen_swap_half(TCGv_i32 dest, TCGv_i32 var) { - tcg_gen_rotri_i32(var, var, 16); + tcg_gen_rotri_i32(dest, var, 16); } /* Dual 16-bit add. Result placed in t0 and t1 is marked as dead. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VREV32: switch (size) { case 0: tcg_gen_bswap32_i32(tmp, tmp); break; - case 1: gen_swap_half(tmp); break; + case 1: gen_swap_half(tmp, tmp); break; default: abort(); } break; @@ -XXX,XX +XXX,XX @@ static bool op_smlad(DisasContext *s, arg_rrrr *a, bool m_swap, bool sub) t1 = load_reg(s, a->rn); t2 = load_reg(s, a->rm); if (m_swap) { - gen_swap_half(t2); + gen_swap_half(t2, t2); } gen_smul_dual(t1, t2); @@ -XXX,XX +XXX,XX @@ static bool op_smlald(DisasContext *s, arg_rrrr *a, bool m_swap, bool sub) t1 = load_reg(s, a->rn); t2 = load_reg(s, a->rm); if (m_swap) { - gen_swap_half(t2); + gen_swap_half(t2, t2); } gen_smul_dual(t1, t2); -- 2.20.1 Convert the VREV32 and VREV16 insns in the Neon 2-reg-misc group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-13-peter.maydell@linaro.org --- target/arm/translate.h | 1 + target/arm/neon-dp.decode | 2 ++ target/arm/translate-neon.inc.c | 55 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 12 ++----- 4 files changed, 60 insertions(+), 10 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void GVecGen4Fn(unsigned, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t); /* Function prototype for gen_ functions for calling Neon helpers */ +typedef void NeonGenOneOpFn(TCGv_i32, TCGv_i32); typedef void NeonGenOneOpEnvFn(TCGv_i32, TCGv_ptr, TCGv_i32); typedef void NeonGenTwoOpFn(TCGv_i32, TCGv_i32, TCGv_i32); typedef void NeonGenTwoOpEnvFn(TCGv_i32, TCGv_ptr, TCGv_i32, TCGv_i32); diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm &2misc vm=%vm_dp vd=%vd_dp q=1 VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc + VREV32 1111 001 11 . 11 .. 00 .... 0 0001 . . 0 .... @2misc + VREV16 1111 001 11 . 11 .. 00 .... 0 0010 . . 0 .... @2misc VPADDL_S 1111 001 11 . 11 .. 00 .... 0 0100 . . 0 .... @2misc VPADDL_U 1111 001 11 . 11 .. 00 .... 0 0101 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2M_CRYPTO(AESIMC, aa32_aes, 0) DO_2M_CRYPTO(SHA1H, aa32_sha1, 2) DO_2M_CRYPTO(SHA1SU1, aa32_sha1, 2) DO_2M_CRYPTO(SHA256SU0, aa32_sha2, 2) + +static bool do_2misc(DisasContext *s, arg_2misc *a, NeonGenOneOpFn *fn) +{ + int pass; + + /* Handle a 2-reg-misc operation by iterating 32 bits at a time */ + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (!fn) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + fn(tmp, tmp); + neon_store_reg(a->vd, pass, tmp); + } + + return true; +} + +static bool trans_VREV32(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + tcg_gen_bswap32_i32, + gen_swap_half, + NULL, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} + +static bool trans_VREV16(DisasContext *s, arg_2misc *a) +{ + if (a->size != 0) { + return false; + } + return do_2misc(s, a, gen_rev16); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_AESE: case NEON_2RM_AESMC: case NEON_2RM_SHA1H: case NEON_2RM_SHA1SU1: + case NEON_2RM_VREV32: + case NEON_2RM_VREV16: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VREV32: - switch (size) { - case 0: tcg_gen_bswap32_i32(tmp, tmp); break; - case 1: gen_swap_half(tmp, tmp); break; - default: abort(); - } - break; - case NEON_2RM_VREV16: - gen_rev16(tmp, tmp); - break; case NEON_2RM_VCLS: switch (size) { case 0: gen_helper_neon_cls_s8(tmp, tmp); break; -- 2.20.1 Convert the remaining ops in the Neon 2-reg-misc group which can be implemented simply with our do_2misc() helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-14-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 10 +++++ target/arm/translate-neon.inc.c | 69 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 38 ++++-------------- 3 files changed, 86 insertions(+), 31 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm AESMC 1111 001 11 . 11 .. 00 .... 0 0111 0 . 0 .... @2misc_q1 AESIMC 1111 001 11 . 11 .. 00 .... 0 0111 1 . 0 .... @2misc_q1 + VCLS 1111 001 11 . 11 .. 00 .... 0 1000 . . 0 .... @2misc + VCLZ 1111 001 11 . 11 .. 00 .... 0 1001 . . 0 .... @2misc + VCNT 1111 001 11 . 11 .. 00 .... 0 1010 . . 0 .... @2misc + VMVN 1111 001 11 . 11 .. 00 .... 0 1011 . . 0 .... @2misc VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VABS 1111 001 11 . 11 .. 01 .... 0 0110 . . 0 .... @2misc VNEG 1111 001 11 . 11 .. 01 .... 0 0111 . . 0 .... @2misc + VABS_F 1111 001 11 . 11 .. 01 .... 0 1110 . . 0 .... @2misc + VNEG_F 1111 001 11 . 11 .. 01 .... 0 1111 . . 0 .... @2misc + VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 + + VRECPE 1111 001 11 . 11 .. 11 .... 0 1000 . . 0 .... @2misc + VRSQRTE 1111 001 11 . 11 .. 11 .... 0 1001 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VREV16(DisasContext *s, arg_2misc *a) } return do_2misc(s, a, gen_rev16); } + +static bool trans_VCLS(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + gen_helper_neon_cls_s8, + gen_helper_neon_cls_s16, + gen_helper_neon_cls_s32, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} + +static void do_VCLZ_32(TCGv_i32 rd, TCGv_i32 rm) +{ + tcg_gen_clzi_i32(rd, rm, 32); +} + +static bool trans_VCLZ(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + gen_helper_neon_clz_u8, + gen_helper_neon_clz_u16, + do_VCLZ_32, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} + +static bool trans_VCNT(DisasContext *s, arg_2misc *a) +{ + if (a->size != 0) { + return false; + } + return do_2misc(s, a, gen_helper_neon_cnt_u8); +} + +static bool trans_VABS_F(DisasContext *s, arg_2misc *a) +{ + if (a->size != 2) { + return false; + } + /* TODO: FP16 : size == 1 */ + return do_2misc(s, a, gen_helper_vfp_abss); +} + +static bool trans_VNEG_F(DisasContext *s, arg_2misc *a) +{ + if (a->size != 2) { + return false; + } + /* TODO: FP16 : size == 1 */ + return do_2misc(s, a, gen_helper_vfp_negs); +} + +static bool trans_VRECPE(DisasContext *s, arg_2misc *a) +{ + if (a->size != 2) { + return false; + } + return do_2misc(s, a, gen_helper_recpe_u32); +} + +static bool trans_VRSQRTE(DisasContext *s, arg_2misc *a) +{ + if (a->size != 2) { + return false; + } + return do_2misc(s, a, gen_helper_rsqrte_u32); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_SHA1SU1: case NEON_2RM_VREV32: case NEON_2RM_VREV16: + case NEON_2RM_VCLS: + case NEON_2RM_VCLZ: + case NEON_2RM_VCNT: + case NEON_2RM_VABS_F: + case NEON_2RM_VNEG_F: + case NEON_2RM_VRECPE: + case NEON_2RM_VRSQRTE: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VCLS: - switch (size) { - case 0: gen_helper_neon_cls_s8(tmp, tmp); break; - case 1: gen_helper_neon_cls_s16(tmp, tmp); break; - case 2: gen_helper_neon_cls_s32(tmp, tmp); break; - default: abort(); - } - break; - case NEON_2RM_VCLZ: - switch (size) { - case 0: gen_helper_neon_clz_u8(tmp, tmp); break; - case 1: gen_helper_neon_clz_u16(tmp, tmp); break; - case 2: tcg_gen_clzi_i32(tmp, tmp, 32); break; - default: abort(); - } - break; - case NEON_2RM_VCNT: - gen_helper_neon_cnt_u8(tmp, tmp); - break; case NEON_2RM_VQABS: switch (size) { case 0: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(fpstatus); break; } - case NEON_2RM_VABS_F: - gen_helper_vfp_abss(tmp, tmp); - break; - case NEON_2RM_VNEG_F: - gen_helper_vfp_negs(tmp, tmp); - break; case NEON_2RM_VSWP: tmp2 = neon_load_reg(rd, pass); neon_store_reg(rm, pass, tmp2); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(fpst); break; } - case NEON_2RM_VRECPE: - gen_helper_recpe_u32(tmp, tmp); - break; - case NEON_2RM_VRSQRTE: - gen_helper_rsqrte_u32(tmp, tmp); - break; case NEON_2RM_VRECPE_F: { TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.20.1 Convert the Neon VQABS and VQNEG insns to decodetree. Since these are the only ones which need cpu_env passing to the helper, we wrap the helper rather than creating a whole new do_2misc_env() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-15-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 3 +++ target/arm/translate-neon.inc.c | 35 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 30 ++-------------------------- 3 files changed, 40 insertions(+), 28 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc VPADAL_U 1111 001 11 . 11 .. 00 .... 0 1101 . . 0 .... @2misc + VQABS 1111 001 11 . 11 .. 00 .... 0 1110 . . 0 .... @2misc + VQNEG 1111 001 11 . 11 .. 00 .... 0 1111 . . 0 .... @2misc + VCGT0 1111 001 11 . 11 .. 01 .... 0 0000 . . 0 .... @2misc VCGE0 1111 001 11 . 11 .. 01 .... 0 0001 . . 0 .... @2misc VCEQ0 1111 001 11 . 11 .. 01 .... 0 0010 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VRSQRTE(DisasContext *s, arg_2misc *a) } return do_2misc(s, a, gen_helper_rsqrte_u32); } + +#define WRAP_1OP_ENV_FN(WRAPNAME, FUNC) \ + static void WRAPNAME(TCGv_i32 d, TCGv_i32 m) \ + { \ + FUNC(d, cpu_env, m); \ + } + +WRAP_1OP_ENV_FN(gen_VQABS_s8, gen_helper_neon_qabs_s8) +WRAP_1OP_ENV_FN(gen_VQABS_s16, gen_helper_neon_qabs_s16) +WRAP_1OP_ENV_FN(gen_VQABS_s32, gen_helper_neon_qabs_s32) +WRAP_1OP_ENV_FN(gen_VQNEG_s8, gen_helper_neon_qneg_s8) +WRAP_1OP_ENV_FN(gen_VQNEG_s16, gen_helper_neon_qneg_s16) +WRAP_1OP_ENV_FN(gen_VQNEG_s32, gen_helper_neon_qneg_s32) + +static bool trans_VQABS(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + gen_VQABS_s8, + gen_VQABS_s16, + gen_VQABS_s32, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} + +static bool trans_VQNEG(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + gen_VQNEG_s8, + gen_VQNEG_s16, + gen_VQNEG_s32, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VNEG_F: case NEON_2RM_VRECPE: case NEON_2RM_VRSQRTE: + case NEON_2RM_VQABS: + case NEON_2RM_VQNEG: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VQABS: - switch (size) { - case 0: - gen_helper_neon_qabs_s8(tmp, cpu_env, tmp); - break; - case 1: - gen_helper_neon_qabs_s16(tmp, cpu_env, tmp); - break; - case 2: - gen_helper_neon_qabs_s32(tmp, cpu_env, tmp); - break; - default: abort(); - } - break; - case NEON_2RM_VQNEG: - switch (size) { - case 0: - gen_helper_neon_qneg_s8(tmp, cpu_env, tmp); - break; - case 1: - gen_helper_neon_qneg_s16(tmp, cpu_env, tmp); - break; - case 2: - gen_helper_neon_qneg_s32(tmp, cpu_env, tmp); - break; - default: abort(); - } - break; case NEON_2RM_VCGT0_F: { TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.20.1 Convert the Neon 2-reg-misc insns which are implemented with simple calls to functions that take the input, output and fpstatus pointer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-16-peter.maydell@linaro.org --- target/arm/translate.h | 1 + target/arm/neon-dp.decode | 8 +++++ target/arm/translate-neon.inc.c | 62 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 56 ++++------------------------- 4 files changed, 78 insertions(+), 49 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void NeonGenNarrowFn(TCGv_i32, TCGv_i64); typedef void NeonGenNarrowEnvFn(TCGv_i32, TCGv_ptr, TCGv_i64); typedef void NeonGenWidenFn(TCGv_i64, TCGv_i32); typedef void NeonGenTwoOpWidenFn(TCGv_i64, TCGv_i32, TCGv_i32); +typedef void NeonGenOneSingleOpFn(TCGv_i32, TCGv_i32, TCGv_ptr); typedef void NeonGenTwoSingleOpFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr); typedef void NeonGenTwoDoubleOpFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGv_ptr); typedef void NeonGenOne64OpFn(TCGv_i64, TCGv_i64); diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm SHA1SU1 1111 001 11 . 11 .. 10 .... 0 0111 0 . 0 .... @2misc_q1 SHA256SU0 1111 001 11 . 11 .. 10 .... 0 0111 1 . 0 .... @2misc_q1 + VRINTX 1111 001 11 . 11 .. 10 .... 0 1001 . . 0 .... @2misc + VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 VRECPE 1111 001 11 . 11 .. 11 .... 0 1000 . . 0 .... @2misc VRSQRTE 1111 001 11 . 11 .. 11 .... 0 1001 . . 0 .... @2misc + VRECPE_F 1111 001 11 . 11 .. 11 .... 0 1010 . . 0 .... @2misc + VRSQRTE_F 1111 001 11 . 11 .. 11 .... 0 1011 . . 0 .... @2misc + VCVT_FS 1111 001 11 . 11 .. 11 .... 0 1100 . . 0 .... @2misc + VCVT_FU 1111 001 11 . 11 .. 11 .... 0 1101 . . 0 .... @2misc + VCVT_SF 1111 001 11 . 11 .. 11 .... 0 1110 . . 0 .... @2misc + VCVT_UF 1111 001 11 . 11 .. 11 .... 0 1111 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VQNEG(DisasContext *s, arg_2misc *a) }; return do_2misc(s, a, fn[a->size]); } + +static bool do_2misc_fp(DisasContext *s, arg_2misc *a, + NeonGenOneSingleOpFn *fn) +{ + int pass; + TCGv_ptr fpst; + + /* Handle a 2-reg-misc operation by iterating 32 bits at a time */ + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size != 2) { + /* TODO: FP16 will be the size == 1 case */ + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(1); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + fn(tmp, tmp, fpst); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_ptr(fpst); + + return true; +} + +#define DO_2MISC_FP(INSN, FUNC) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_2misc_fp(s, a, FUNC); \ + } + +DO_2MISC_FP(VRECPE_F, gen_helper_recpe_f32) +DO_2MISC_FP(VRSQRTE_F, gen_helper_rsqrte_f32) +DO_2MISC_FP(VCVT_FS, gen_helper_vfp_sitos) +DO_2MISC_FP(VCVT_FU, gen_helper_vfp_uitos) +DO_2MISC_FP(VCVT_SF, gen_helper_vfp_tosizs) +DO_2MISC_FP(VCVT_UF, gen_helper_vfp_touizs) + +static bool trans_VRINTX(DisasContext *s, arg_2misc *a) +{ + if (!arm_dc_feature(s, ARM_FEATURE_V8)) { + return false; + } + return do_2misc_fp(s, a, gen_helper_rints_exact); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VRSQRTE: case NEON_2RM_VQABS: case NEON_2RM_VQNEG: + case NEON_2RM_VRECPE_F: + case NEON_2RM_VRSQRTE_F: + case NEON_2RM_VCVT_FS: + case NEON_2RM_VCVT_FU: + case NEON_2RM_VCVT_SF: + case NEON_2RM_VCVT_UF: + case NEON_2RM_VRINTX: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_i32(tcg_rmode); break; } - case NEON_2RM_VRINTX: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_rints_exact(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } case NEON_2RM_VCVTAU: case NEON_2RM_VCVTAS: case NEON_2RM_VCVTNU: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(fpst); break; } - case NEON_2RM_VRECPE_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_recpe_f32(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VRSQRTE_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_rsqrte_f32(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCVT_FS: /* VCVT.F32.S32 */ - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_vfp_sitos(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCVT_FU: /* VCVT.F32.U32 */ - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_vfp_uitos(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCVT_SF: /* VCVT.S32.F32 */ - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_vfp_tosizs(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCVT_UF: /* VCVT.U32.F32 */ - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_vfp_touizs(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } default: /* Reserved op values were caught by the * neon_2rm_sizes[] check earlier. -- 2.20.1 Convert the fp-compare-with-zero insns in the Neon 2-reg-misc group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-17-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 6 ++++ target/arm/translate-neon.inc.c | 28 ++++++++++++++++++ target/arm/translate.c | 50 ++++----------------------------- 3 files changed, 39 insertions(+), 45 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VABS 1111 001 11 . 11 .. 01 .... 0 0110 . . 0 .... @2misc VNEG 1111 001 11 . 11 .. 01 .... 0 0111 . . 0 .... @2misc + VCGT0_F 1111 001 11 . 11 .. 01 .... 0 1000 . . 0 .... @2misc + VCGE0_F 1111 001 11 . 11 .. 01 .... 0 1001 . . 0 .... @2misc + VCEQ0_F 1111 001 11 . 11 .. 01 .... 0 1010 . . 0 .... @2misc + VCLE0_F 1111 001 11 . 11 .. 01 .... 0 1011 . . 0 .... @2misc + VCLT0_F 1111 001 11 . 11 .. 01 .... 0 1100 . . 0 .... @2misc + VABS_F 1111 001 11 . 11 .. 01 .... 0 1110 . . 0 .... @2misc VNEG_F 1111 001 11 . 11 .. 01 .... 0 1111 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTX(DisasContext *s, arg_2misc *a) } return do_2misc_fp(s, a, gen_helper_rints_exact); } + +#define WRAP_FP_CMP0_FWD(WRAPNAME, FUNC) \ + static void WRAPNAME(TCGv_i32 d, TCGv_i32 m, TCGv_ptr fpst) \ + { \ + TCGv_i32 zero = tcg_const_i32(0); \ + FUNC(d, m, zero, fpst); \ + tcg_temp_free_i32(zero); \ + } +#define WRAP_FP_CMP0_REV(WRAPNAME, FUNC) \ + static void WRAPNAME(TCGv_i32 d, TCGv_i32 m, TCGv_ptr fpst) \ + { \ + TCGv_i32 zero = tcg_const_i32(0); \ + FUNC(d, zero, m, fpst); \ + tcg_temp_free_i32(zero); \ + } + +#define DO_FP_CMP0(INSN, FUNC, REV) \ + WRAP_FP_CMP0_##REV(gen_##INSN, FUNC) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_2misc_fp(s, a, gen_##INSN); \ + } + +DO_FP_CMP0(VCGT0_F, gen_helper_neon_cgt_f32, FWD) +DO_FP_CMP0(VCGE0_F, gen_helper_neon_cge_f32, FWD) +DO_FP_CMP0(VCEQ0_F, gen_helper_neon_ceq_f32, FWD) +DO_FP_CMP0(VCLE0_F, gen_helper_neon_cge_f32, REV) +DO_FP_CMP0(VCLT0_F, gen_helper_neon_cgt_f32, REV) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VCVT_SF: case NEON_2RM_VCVT_UF: case NEON_2RM_VRINTX: + case NEON_2RM_VCGT0_F: + case NEON_2RM_VCGE0_F: + case NEON_2RM_VCEQ0_F: + case NEON_2RM_VCLE0_F: + case NEON_2RM_VCLT0_F: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VCGT0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_cgt_f32(tmp, tmp, tmp2, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCGE0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_cge_f32(tmp, tmp, tmp2, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCEQ0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_ceq_f32(tmp, tmp, tmp2, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCLE0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_cge_f32(tmp, tmp2, tmp, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCLT0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_cgt_f32(tmp, tmp2, tmp, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } case NEON_2RM_VSWP: tmp2 = neon_load_reg(rd, pass); neon_store_reg(rm, pass, tmp2); -- 2.20.1 Convert the Neon 2-reg-misc VRINT insns to decodetree. Giving these insns their own do_vrint() function allows us to change the rounding mode just once at the start and end rather than doing it for every element in the vector. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-18-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 8 +++++ target/arm/translate-neon.inc.c | 61 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 31 +++-------------- 3 files changed, 74 insertions(+), 26 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm SHA1SU1 1111 001 11 . 11 .. 10 .... 0 0111 0 . 0 .... @2misc_q1 SHA256SU0 1111 001 11 . 11 .. 10 .... 0 0111 1 . 0 .... @2misc_q1 + VRINTN 1111 001 11 . 11 .. 10 .... 0 1000 . . 0 .... @2misc VRINTX 1111 001 11 . 11 .. 10 .... 0 1001 . . 0 .... @2misc + VRINTA 1111 001 11 . 11 .. 10 .... 0 1010 . . 0 .... @2misc + VRINTZ 1111 001 11 . 11 .. 10 .... 0 1011 . . 0 .... @2misc VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 + + VRINTM 1111 001 11 . 11 .. 10 .... 0 1101 . . 0 .... @2misc + VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 + VRINTP 1111 001 11 . 11 .. 10 .... 0 1111 . . 0 .... @2misc + VRECPE 1111 001 11 . 11 .. 11 .... 0 1000 . . 0 .... @2misc VRSQRTE 1111 001 11 . 11 .. 11 .... 0 1001 . . 0 .... @2misc VRECPE_F 1111 001 11 . 11 .. 11 .... 0 1010 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_FP_CMP0(VCGE0_F, gen_helper_neon_cge_f32, FWD) DO_FP_CMP0(VCEQ0_F, gen_helper_neon_ceq_f32, FWD) DO_FP_CMP0(VCLE0_F, gen_helper_neon_cge_f32, REV) DO_FP_CMP0(VCLT0_F, gen_helper_neon_cgt_f32, REV) + +static bool do_vrint(DisasContext *s, arg_2misc *a, int rmode) +{ + /* + * Handle a VRINT* operation by iterating 32 bits at a time, + * with a specified rounding mode in operation. + */ + int pass; + TCGv_ptr fpst; + TCGv_i32 tcg_rmode; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON) || + !arm_dc_feature(s, ARM_FEATURE_V8)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size != 2) { + /* TODO: FP16 will be the size == 1 case */ + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(1); + tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); + gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, cpu_env); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + gen_helper_rints(tmp, tmp, fpst); + neon_store_reg(a->vd, pass, tmp); + } + gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, cpu_env); + tcg_temp_free_i32(tcg_rmode); + tcg_temp_free_ptr(fpst); + + return true; +} + +#define DO_VRINT(INSN, RMODE) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_vrint(s, a, RMODE); \ + } + +DO_VRINT(VRINTN, FPROUNDING_TIEEVEN) +DO_VRINT(VRINTA, FPROUNDING_TIEAWAY) +DO_VRINT(VRINTZ, FPROUNDING_ZERO) +DO_VRINT(VRINTM, FPROUNDING_NEGINF) +DO_VRINT(VRINTP, FPROUNDING_POSINF) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VCEQ0_F: case NEON_2RM_VCLE0_F: case NEON_2RM_VCLT0_F: + case NEON_2RM_VRINTN: + case NEON_2RM_VRINTA: + case NEON_2RM_VRINTM: + case NEON_2RM_VRINTP: + case NEON_2RM_VRINTZ: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg(rm, pass, tmp2); break; - case NEON_2RM_VRINTN: - case NEON_2RM_VRINTA: - case NEON_2RM_VRINTM: - case NEON_2RM_VRINTP: - case NEON_2RM_VRINTZ: - { - TCGv_i32 tcg_rmode; - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - int rmode; - - if (op == NEON_2RM_VRINTZ) { - rmode = FPROUNDING_ZERO; - } else { - rmode = fp_decode_rm[((op & 0x6) >> 1) ^ 1]; - } - - tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, - cpu_env); - gen_helper_rints(tmp, tmp, fpstatus); - gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, - cpu_env); - tcg_temp_free_ptr(fpstatus); - tcg_temp_free_i32(tcg_rmode); - break; - } case NEON_2RM_VCVTAU: case NEON_2RM_VCVTAS: case NEON_2RM_VCVTNU: -- 2.20.1 Convert the VCVT instructions in the 2-reg-misc grouping to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-19-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 9 +++++ target/arm/translate-neon.inc.c | 70 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 70 ++++----------------------------- 3 files changed, 87 insertions(+), 62 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VRINTP 1111 001 11 . 11 .. 10 .... 0 1111 . . 0 .... @2misc + VCVTAS 1111 001 11 . 11 .. 11 .... 0 0000 . . 0 .... @2misc + VCVTAU 1111 001 11 . 11 .. 11 .... 0 0001 . . 0 .... @2misc + VCVTNS 1111 001 11 . 11 .. 11 .... 0 0010 . . 0 .... @2misc + VCVTNU 1111 001 11 . 11 .. 11 .... 0 0011 . . 0 .... @2misc + VCVTPS 1111 001 11 . 11 .. 11 .... 0 0100 . . 0 .... @2misc + VCVTPU 1111 001 11 . 11 .. 11 .... 0 0101 . . 0 .... @2misc + VCVTMS 1111 001 11 . 11 .. 11 .... 0 0110 . . 0 .... @2misc + VCVTMU 1111 001 11 . 11 .. 11 .... 0 0111 . . 0 .... @2misc + VRECPE 1111 001 11 . 11 .. 11 .... 0 1000 . . 0 .... @2misc VRSQRTE 1111 001 11 . 11 .. 11 .... 0 1001 . . 0 .... @2misc VRECPE_F 1111 001 11 . 11 .. 11 .... 0 1010 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_VRINT(VRINTA, FPROUNDING_TIEAWAY) DO_VRINT(VRINTZ, FPROUNDING_ZERO) DO_VRINT(VRINTM, FPROUNDING_NEGINF) DO_VRINT(VRINTP, FPROUNDING_POSINF) + +static bool do_vcvt(DisasContext *s, arg_2misc *a, int rmode, bool is_signed) +{ + /* + * Handle a VCVT* operation by iterating 32 bits at a time, + * with a specified rounding mode in operation. + */ + int pass; + TCGv_ptr fpst; + TCGv_i32 tcg_rmode, tcg_shift; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON) || + !arm_dc_feature(s, ARM_FEATURE_V8)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size != 2) { + /* TODO: FP16 will be the size == 1 case */ + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(1); + tcg_shift = tcg_const_i32(0); + tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); + gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, cpu_env); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + if (is_signed) { + gen_helper_vfp_tosls(tmp, tmp, tcg_shift, fpst); + } else { + gen_helper_vfp_touls(tmp, tmp, tcg_shift, fpst); + } + neon_store_reg(a->vd, pass, tmp); + } + gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, cpu_env); + tcg_temp_free_i32(tcg_rmode); + tcg_temp_free_i32(tcg_shift); + tcg_temp_free_ptr(fpst); + + return true; +} + +#define DO_VCVT(INSN, RMODE, SIGNED) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_vcvt(s, a, RMODE, SIGNED); \ + } + +DO_VCVT(VCVTAU, FPROUNDING_TIEAWAY, false) +DO_VCVT(VCVTAS, FPROUNDING_TIEAWAY, true) +DO_VCVT(VCVTNU, FPROUNDING_TIEEVEN, false) +DO_VCVT(VCVTNS, FPROUNDING_TIEEVEN, true) +DO_VCVT(VCVTPU, FPROUNDING_POSINF, false) +DO_VCVT(VCVTPS, FPROUNDING_POSINF, true) +DO_VCVT(VCVTMU, FPROUNDING_NEGINF, false) +DO_VCVT(VCVTMS, FPROUNDING_NEGINF, true) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) #define NEON_2RM_VCVT_SF 62 #define NEON_2RM_VCVT_UF 63 -static bool neon_2rm_is_v8_op(int op) -{ - /* Return true if this neon 2reg-misc op is ARMv8 and up */ - switch (op) { - case NEON_2RM_VRINTN: - case NEON_2RM_VRINTA: - case NEON_2RM_VRINTM: - case NEON_2RM_VRINTP: - case NEON_2RM_VRINTZ: - case NEON_2RM_VRINTX: - case NEON_2RM_VCVTAU: - case NEON_2RM_VCVTAS: - case NEON_2RM_VCVTNU: - case NEON_2RM_VCVTNS: - case NEON_2RM_VCVTPU: - case NEON_2RM_VCVTPS: - case NEON_2RM_VCVTMU: - case NEON_2RM_VCVTMS: - return true; - default: - return false; - } -} - /* Each entry in this array has bit n set if the insn allows * size value n (otherwise it will UNDEF). Since unallocated * op values will have no bits set they always UNDEF. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if ((neon_2rm_sizes[op] & (1 << size)) == 0) { return 1; } - if (neon_2rm_is_v8_op(op) && - !arm_dc_feature(s, ARM_FEATURE_V8)) { - return 1; - } if (q && ((rm | rd) & 1)) { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VRINTM: case NEON_2RM_VRINTP: case NEON_2RM_VRINTZ: + case NEON_2RM_VCVTAU: + case NEON_2RM_VCVTAS: + case NEON_2RM_VCVTNU: + case NEON_2RM_VCVTNS: + case NEON_2RM_VCVTPU: + case NEON_2RM_VCVTPS: + case NEON_2RM_VCVTMU: + case NEON_2RM_VCVTMS: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg(rm, pass, tmp2); break; - case NEON_2RM_VCVTAU: - case NEON_2RM_VCVTAS: - case NEON_2RM_VCVTNU: - case NEON_2RM_VCVTNS: - case NEON_2RM_VCVTPU: - case NEON_2RM_VCVTPS: - case NEON_2RM_VCVTMU: - case NEON_2RM_VCVTMS: - { - bool is_signed = !extract32(insn, 7, 1); - TCGv_ptr fpst = get_fpstatus_ptr(1); - TCGv_i32 tcg_rmode, tcg_shift; - int rmode = fp_decode_rm[extract32(insn, 8, 2)]; - - tcg_shift = tcg_const_i32(0); - tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, - cpu_env); - - if (is_signed) { - gen_helper_vfp_tosls(tmp, tmp, - tcg_shift, fpst); - } else { - gen_helper_vfp_touls(tmp, tmp, - tcg_shift, fpst); - } - - gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, - cpu_env); - tcg_temp_free_i32(tcg_rmode); - tcg_temp_free_i32(tcg_shift); - tcg_temp_free_ptr(fpst); - break; - } default: /* Reserved op values were caught by the * neon_2rm_sizes[] check earlier. -- 2.20.1 Convert the Neon VSWP insn to decodetree. Since the new implementation doesn't have to share a pass-loop with the other 2-reg-misc operations we can implement the swap with 64-bit accesses rather than 32-bits (which brings us into line with the pseudocode and is more efficient). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-20-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 2 ++ target/arm/translate-neon.inc.c | 41 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 5 +--- 3 files changed, 44 insertions(+), 4 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VABS_F 1111 001 11 . 11 .. 01 .... 0 1110 . . 0 .... @2misc VNEG_F 1111 001 11 . 11 .. 01 .... 0 1111 . . 0 .... @2misc + VSWP 1111 001 11 . 11 .. 10 .... 0 0000 . . 0 .... @2misc + VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_VCVT(VCVTPU, FPROUNDING_POSINF, false) DO_VCVT(VCVTPS, FPROUNDING_POSINF, true) DO_VCVT(VCVTMU, FPROUNDING_NEGINF, false) DO_VCVT(VCVTMS, FPROUNDING_NEGINF, true) + +static bool trans_VSWP(DisasContext *s, arg_2misc *a) +{ + TCGv_i64 rm, rd; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size != 0) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + rm = tcg_temp_new_i64(); + rd = tcg_temp_new_i64(); + for (pass = 0; pass < (a->q ? 2 : 1); pass++) { + neon_load_reg64(rm, a->vm + pass); + neon_load_reg64(rd, a->vd + pass); + neon_store_reg64(rm, a->vd + pass); + neon_store_reg64(rd, a->vm + pass); + } + tcg_temp_free_i64(rm); + tcg_temp_free_i64(rd); + + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VCVTPS: case NEON_2RM_VCVTMU: case NEON_2RM_VCVTMS: + case NEON_2RM_VSWP: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VSWP: - tmp2 = neon_load_reg(rd, pass); - neon_store_reg(rm, pass, tmp2); - break; case NEON_2RM_VTRN: tmp2 = neon_load_reg(rd, pass); switch (size) { -- 2.20.1 Convert the Neon VTRN insn to decodetree. This is the last insn in the Neon data-processing group, so we can remove all the now-unused old decoder framework. It's possible that there's a more efficient implementation of VTRN, but for this conversion we just copy the existing approach. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-21-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 2 +- target/arm/translate-neon.inc.c | 90 ++++++++ target/arm/translate.c | 363 +------------------------------- 3 files changed, 93 insertions(+), 362 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VNEG_F 1111 001 11 . 11 .. 01 .... 0 1111 . . 0 .... @2misc VSWP 1111 001 11 . 11 .. 10 .... 0 0000 . . 0 .... @2misc - + VTRN 1111 001 11 . 11 .. 10 .... 0 0001 . . 0 .... @2misc VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSWP(DisasContext *s, arg_2misc *a) return true; } +static void gen_neon_trn_u8(TCGv_i32 t0, TCGv_i32 t1) +{ + TCGv_i32 rd, tmp; + + rd = tcg_temp_new_i32(); + tmp = tcg_temp_new_i32(); + + tcg_gen_shli_i32(rd, t0, 8); + tcg_gen_andi_i32(rd, rd, 0xff00ff00); + tcg_gen_andi_i32(tmp, t1, 0x00ff00ff); + tcg_gen_or_i32(rd, rd, tmp); + + tcg_gen_shri_i32(t1, t1, 8); + tcg_gen_andi_i32(t1, t1, 0x00ff00ff); + tcg_gen_andi_i32(tmp, t0, 0xff00ff00); + tcg_gen_or_i32(t1, t1, tmp); + tcg_gen_mov_i32(t0, rd); + + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(rd); +} + +static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) +{ + TCGv_i32 rd, tmp; + + rd = tcg_temp_new_i32(); + tmp = tcg_temp_new_i32(); + + tcg_gen_shli_i32(rd, t0, 16); + tcg_gen_andi_i32(tmp, t1, 0xffff); + tcg_gen_or_i32(rd, rd, tmp); + tcg_gen_shri_i32(t1, t1, 16); + tcg_gen_andi_i32(tmp, t0, 0xffff0000); + tcg_gen_or_i32(t1, t1, tmp); + tcg_gen_mov_i32(t0, rd); + + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(rd); +} + +static bool trans_VTRN(DisasContext *s, arg_2misc *a) +{ + TCGv_i32 tmp, tmp2; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (a->size == 3) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + if (a->size == 2) { + for (pass = 0; pass < (a->q ? 4 : 2); pass += 2) { + tmp = neon_load_reg(a->vm, pass); + tmp2 = neon_load_reg(a->vd, pass + 1); + neon_store_reg(a->vm, pass, tmp2); + neon_store_reg(a->vd, pass + 1, tmp); + } + } else { + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + tmp = neon_load_reg(a->vm, pass); + tmp2 = neon_load_reg(a->vd, pass); + if (a->size == 0) { + gen_neon_trn_u8(tmp, tmp2); + } else { + gen_neon_trn_u16(tmp, tmp2); + } + neon_store_reg(a->vm, pass, tmp2); + neon_store_reg(a->vd, pass, tmp); + } + } + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc) gen_rfe(s, pc, load_cpu_field(spsr)); } -static void gen_neon_trn_u8(TCGv_i32 t0, TCGv_i32 t1) -{ - TCGv_i32 rd, tmp; - - rd = tcg_temp_new_i32(); - tmp = tcg_temp_new_i32(); - - tcg_gen_shli_i32(rd, t0, 8); - tcg_gen_andi_i32(rd, rd, 0xff00ff00); - tcg_gen_andi_i32(tmp, t1, 0x00ff00ff); - tcg_gen_or_i32(rd, rd, tmp); - - tcg_gen_shri_i32(t1, t1, 8); - tcg_gen_andi_i32(t1, t1, 0x00ff00ff); - tcg_gen_andi_i32(tmp, t0, 0xff00ff00); - tcg_gen_or_i32(t1, t1, tmp); - tcg_gen_mov_i32(t0, rd); - - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(rd); -} - -static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) -{ - TCGv_i32 rd, tmp; - - rd = tcg_temp_new_i32(); - tmp = tcg_temp_new_i32(); - - tcg_gen_shli_i32(rd, t0, 16); - tcg_gen_andi_i32(tmp, t1, 0xffff); - tcg_gen_or_i32(rd, rd, tmp); - tcg_gen_shri_i32(t1, t1, 16); - tcg_gen_andi_i32(tmp, t0, 0xffff0000); - tcg_gen_or_i32(t1, t1, tmp); - tcg_gen_mov_i32(t0, rd); - - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(rd); -} - -/* Symbolic constants for op fields for Neon 2-register miscellaneous. - * The values correspond to bits [17:16,10:7]; see the ARM ARM DDI0406B - * table A7-13. - */ -#define NEON_2RM_VREV64 0 -#define NEON_2RM_VREV32 1 -#define NEON_2RM_VREV16 2 -#define NEON_2RM_VPADDL 4 -#define NEON_2RM_VPADDL_U 5 -#define NEON_2RM_AESE 6 /* Includes AESD */ -#define NEON_2RM_AESMC 7 /* Includes AESIMC */ -#define NEON_2RM_VCLS 8 -#define NEON_2RM_VCLZ 9 -#define NEON_2RM_VCNT 10 -#define NEON_2RM_VMVN 11 -#define NEON_2RM_VPADAL 12 -#define NEON_2RM_VPADAL_U 13 -#define NEON_2RM_VQABS 14 -#define NEON_2RM_VQNEG 15 -#define NEON_2RM_VCGT0 16 -#define NEON_2RM_VCGE0 17 -#define NEON_2RM_VCEQ0 18 -#define NEON_2RM_VCLE0 19 -#define NEON_2RM_VCLT0 20 -#define NEON_2RM_SHA1H 21 -#define NEON_2RM_VABS 22 -#define NEON_2RM_VNEG 23 -#define NEON_2RM_VCGT0_F 24 -#define NEON_2RM_VCGE0_F 25 -#define NEON_2RM_VCEQ0_F 26 -#define NEON_2RM_VCLE0_F 27 -#define NEON_2RM_VCLT0_F 28 -#define NEON_2RM_VABS_F 30 -#define NEON_2RM_VNEG_F 31 -#define NEON_2RM_VSWP 32 -#define NEON_2RM_VTRN 33 -#define NEON_2RM_VUZP 34 -#define NEON_2RM_VZIP 35 -#define NEON_2RM_VMOVN 36 /* Includes VQMOVN, VQMOVUN */ -#define NEON_2RM_VQMOVN 37 /* Includes VQMOVUN */ -#define NEON_2RM_VSHLL 38 -#define NEON_2RM_SHA1SU1 39 /* Includes SHA256SU0 */ -#define NEON_2RM_VRINTN 40 -#define NEON_2RM_VRINTX 41 -#define NEON_2RM_VRINTA 42 -#define NEON_2RM_VRINTZ 43 -#define NEON_2RM_VCVT_F16_F32 44 -#define NEON_2RM_VRINTM 45 -#define NEON_2RM_VCVT_F32_F16 46 -#define NEON_2RM_VRINTP 47 -#define NEON_2RM_VCVTAU 48 -#define NEON_2RM_VCVTAS 49 -#define NEON_2RM_VCVTNU 50 -#define NEON_2RM_VCVTNS 51 -#define NEON_2RM_VCVTPU 52 -#define NEON_2RM_VCVTPS 53 -#define NEON_2RM_VCVTMU 54 -#define NEON_2RM_VCVTMS 55 -#define NEON_2RM_VRECPE 56 -#define NEON_2RM_VRSQRTE 57 -#define NEON_2RM_VRECPE_F 58 -#define NEON_2RM_VRSQRTE_F 59 -#define NEON_2RM_VCVT_FS 60 -#define NEON_2RM_VCVT_FU 61 -#define NEON_2RM_VCVT_SF 62 -#define NEON_2RM_VCVT_UF 63 - -/* Each entry in this array has bit n set if the insn allows - * size value n (otherwise it will UNDEF). Since unallocated - * op values will have no bits set they always UNDEF. - */ -static const uint8_t neon_2rm_sizes[] = { - [NEON_2RM_VREV64] = 0x7, - [NEON_2RM_VREV32] = 0x3, - [NEON_2RM_VREV16] = 0x1, - [NEON_2RM_VPADDL] = 0x7, - [NEON_2RM_VPADDL_U] = 0x7, - [NEON_2RM_AESE] = 0x1, - [NEON_2RM_AESMC] = 0x1, - [NEON_2RM_VCLS] = 0x7, - [NEON_2RM_VCLZ] = 0x7, - [NEON_2RM_VCNT] = 0x1, - [NEON_2RM_VMVN] = 0x1, - [NEON_2RM_VPADAL] = 0x7, - [NEON_2RM_VPADAL_U] = 0x7, - [NEON_2RM_VQABS] = 0x7, - [NEON_2RM_VQNEG] = 0x7, - [NEON_2RM_VCGT0] = 0x7, - [NEON_2RM_VCGE0] = 0x7, - [NEON_2RM_VCEQ0] = 0x7, - [NEON_2RM_VCLE0] = 0x7, - [NEON_2RM_VCLT0] = 0x7, - [NEON_2RM_SHA1H] = 0x4, - [NEON_2RM_VABS] = 0x7, - [NEON_2RM_VNEG] = 0x7, - [NEON_2RM_VCGT0_F] = 0x4, - [NEON_2RM_VCGE0_F] = 0x4, - [NEON_2RM_VCEQ0_F] = 0x4, - [NEON_2RM_VCLE0_F] = 0x4, - [NEON_2RM_VCLT0_F] = 0x4, - [NEON_2RM_VABS_F] = 0x4, - [NEON_2RM_VNEG_F] = 0x4, - [NEON_2RM_VSWP] = 0x1, - [NEON_2RM_VTRN] = 0x7, - [NEON_2RM_VUZP] = 0x7, - [NEON_2RM_VZIP] = 0x7, - [NEON_2RM_VMOVN] = 0x7, - [NEON_2RM_VQMOVN] = 0x7, - [NEON_2RM_VSHLL] = 0x7, - [NEON_2RM_SHA1SU1] = 0x4, - [NEON_2RM_VRINTN] = 0x4, - [NEON_2RM_VRINTX] = 0x4, - [NEON_2RM_VRINTA] = 0x4, - [NEON_2RM_VRINTZ] = 0x4, - [NEON_2RM_VCVT_F16_F32] = 0x2, - [NEON_2RM_VRINTM] = 0x4, - [NEON_2RM_VCVT_F32_F16] = 0x2, - [NEON_2RM_VRINTP] = 0x4, - [NEON_2RM_VCVTAU] = 0x4, - [NEON_2RM_VCVTAS] = 0x4, - [NEON_2RM_VCVTNU] = 0x4, - [NEON_2RM_VCVTNS] = 0x4, - [NEON_2RM_VCVTPU] = 0x4, - [NEON_2RM_VCVTPS] = 0x4, - [NEON_2RM_VCVTMU] = 0x4, - [NEON_2RM_VCVTMS] = 0x4, - [NEON_2RM_VRECPE] = 0x4, - [NEON_2RM_VRSQRTE] = 0x4, - [NEON_2RM_VRECPE_F] = 0x4, - [NEON_2RM_VRSQRTE_F] = 0x4, - [NEON_2RM_VCVT_FS] = 0x4, - [NEON_2RM_VCVT_FU] = 0x4, - [NEON_2RM_VCVT_SF] = 0x4, - [NEON_2RM_VCVT_UF] = 0x4, -}; - static void gen_gvec_fn3_qc(uint32_t rd_ofs, uint32_t rn_ofs, uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz, gen_helper_gvec_3_ptr *fn) @@ -XXX,XX +XXX,XX @@ void gen_gvec_uaba(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz, &ops[vece]); } -/* Translate a NEON data processing instruction. Return nonzero if the - instruction is invalid. - We process data in a mixture of 32-bit and 64-bit chunks. - Mostly we use 32-bit chunks so we can use normal scalar instructions. */ - -static int disas_neon_data_insn(DisasContext *s, uint32_t insn) -{ - int op; - int q; - int rd, rm; - int size; - int pass; - int u; - TCGv_i32 tmp, tmp2; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { - return 1; - } - - /* FIXME: this access check should not take precedence over UNDEF - * for invalid encodings; we will generate incorrect syndrome information - * for attempts to execute invalid vfp/neon encodings with FP disabled. - */ - if (s->fp_excp_el) { - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_simd_access_trap(1, 0xe, false), s->fp_excp_el); - return 0; - } - - if (!s->vfp_enabled) - return 1; - q = (insn & (1 << 6)) != 0; - u = (insn >> 24) & 1; - VFP_DREG_D(rd, insn); - VFP_DREG_M(rm, insn); - size = (insn >> 20) & 3; - - if ((insn & (1 << 23)) == 0) { - /* Three register same length: handled by decodetree */ - return 1; - } else if (insn & (1 << 4)) { - /* Two registers and shift or reg and imm: handled by decodetree */ - return 1; - } else { /* (insn & 0x00800010 == 0x00800000) */ - if (size != 3) { - /* - * Three registers of different lengths, or two registers and - * a scalar: handled by decodetree - */ - return 1; - } else { /* size == 3 */ - if (!u) { - /* Extract: handled by decodetree */ - return 1; - } else if ((insn & (1 << 11)) == 0) { - /* Two register misc. */ - op = ((insn >> 12) & 0x30) | ((insn >> 7) & 0xf); - size = (insn >> 18) & 3; - /* UNDEF for unknown op values and bad op-size combinations */ - if ((neon_2rm_sizes[op] & (1 << size)) == 0) { - return 1; - } - if (q && ((rm | rd) & 1)) { - return 1; - } - switch (op) { - case NEON_2RM_VREV64: - case NEON_2RM_VPADDL: case NEON_2RM_VPADDL_U: - case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: - case NEON_2RM_VUZP: - case NEON_2RM_VZIP: - case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: - case NEON_2RM_VSHLL: - case NEON_2RM_VCVT_F16_F32: - case NEON_2RM_VCVT_F32_F16: - case NEON_2RM_VMVN: - case NEON_2RM_VNEG: - case NEON_2RM_VABS: - case NEON_2RM_VCEQ0: - case NEON_2RM_VCGT0: - case NEON_2RM_VCLE0: - case NEON_2RM_VCGE0: - case NEON_2RM_VCLT0: - case NEON_2RM_AESE: case NEON_2RM_AESMC: - case NEON_2RM_SHA1H: - case NEON_2RM_SHA1SU1: - case NEON_2RM_VREV32: - case NEON_2RM_VREV16: - case NEON_2RM_VCLS: - case NEON_2RM_VCLZ: - case NEON_2RM_VCNT: - case NEON_2RM_VABS_F: - case NEON_2RM_VNEG_F: - case NEON_2RM_VRECPE: - case NEON_2RM_VRSQRTE: - case NEON_2RM_VQABS: - case NEON_2RM_VQNEG: - case NEON_2RM_VRECPE_F: - case NEON_2RM_VRSQRTE_F: - case NEON_2RM_VCVT_FS: - case NEON_2RM_VCVT_FU: - case NEON_2RM_VCVT_SF: - case NEON_2RM_VCVT_UF: - case NEON_2RM_VRINTX: - case NEON_2RM_VCGT0_F: - case NEON_2RM_VCGE0_F: - case NEON_2RM_VCEQ0_F: - case NEON_2RM_VCLE0_F: - case NEON_2RM_VCLT0_F: - case NEON_2RM_VRINTN: - case NEON_2RM_VRINTA: - case NEON_2RM_VRINTM: - case NEON_2RM_VRINTP: - case NEON_2RM_VRINTZ: - case NEON_2RM_VCVTAU: - case NEON_2RM_VCVTAS: - case NEON_2RM_VCVTNU: - case NEON_2RM_VCVTNS: - case NEON_2RM_VCVTPU: - case NEON_2RM_VCVTPS: - case NEON_2RM_VCVTMU: - case NEON_2RM_VCVTMS: - case NEON_2RM_VSWP: - /* handled by decodetree */ - return 1; - case NEON_2RM_VTRN: - if (size == 2) { - int n; - for (n = 0; n < (q ? 4 : 2); n += 2) { - tmp = neon_load_reg(rm, n); - tmp2 = neon_load_reg(rd, n + 1); - neon_store_reg(rm, n, tmp2); - neon_store_reg(rd, n + 1, tmp); - } - } else { - goto elementwise; - } - break; - - default: - elementwise: - for (pass = 0; pass < (q ? 4 : 2); pass++) { - tmp = neon_load_reg(rm, pass); - switch (op) { - case NEON_2RM_VTRN: - tmp2 = neon_load_reg(rd, pass); - switch (size) { - case 0: gen_neon_trn_u8(tmp, tmp2); break; - case 1: gen_neon_trn_u16(tmp, tmp2); break; - default: abort(); - } - neon_store_reg(rm, pass, tmp2); - break; - default: - /* Reserved op values were caught by the - * neon_2rm_sizes[] check earlier. - */ - abort(); - } - neon_store_reg(rd, pass, tmp); - } - break; - } - } else { - /* VTBL, VTBX, VDUP: handled by decodetree */ - return 1; - } - } - } - return 0; -} - static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } /* fall back to legacy decoder */ - if (((insn >> 25) & 7) == 1) { - /* NEON Data processing. */ - if (disas_neon_data_insn(s, insn)) { - goto illegal_op; - } - return; - } if ((insn & 0x0e000f00) == 0x0c000100) { if (arm_dc_feature(s, ARM_FEATURE_IWMMXT)) { /* iWMMXt register transfer. */ @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) break; } if (((insn >> 24) & 3) == 3) { - /* Translate into the equivalent ARM encoding. */ - insn = (insn & 0xe2ffffff) | ((insn & (1 << 28)) >> 4) | (1 << 28); - if (disas_neon_data_insn(s, insn)) { - goto illegal_op; - } + /* Neon DP, but failed disas_neon_dp() */ + goto illegal_op; } else if (((insn >> 8) & 0xe) == 10) { /* VFP, but failed disas_vfp. */ goto illegal_op; -- 2.20.1 The functions neon_element_offset(), neon_load_element(), neon_load_element64(), neon_store_element() and neon_store_element64() are used only in the translate-neon.inc.c file, so move their definitions there. Since the .inc.c file is #included in translate.c this doesn't make much difference currently, but it's a more logical place to put the functions and it might be helpful if we ever decide to try to make the .inc.c files genuinely separate compilation units. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-22-peter.maydell@linaro.org --- target/arm/translate-neon.inc.c | 101 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 101 -------------------------------- 2 files changed, 101 insertions(+), 101 deletions(-) diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static inline int rsub_8(DisasContext *s, int x) #include "decode-neon-ls.inc.c" #include "decode-neon-shared.inc.c" +/* Return the offset of a 2**SIZE piece of a NEON register, at index ELE, + * where 0 is the least significant end of the register. + */ +static inline long +neon_element_offset(int reg, int element, MemOp size) +{ + int element_size = 1 << size; + int ofs = element * element_size; +#ifdef HOST_WORDS_BIGENDIAN + /* Calculate the offset assuming fully little-endian, + * then XOR to account for the order of the 8-byte units. + */ + if (element_size < 8) { + ofs ^= 8 - element_size; + } +#endif + return neon_reg_offset(reg, 0) + ofs; +} + +static void neon_load_element(TCGv_i32 var, int reg, int ele, MemOp mop) +{ + long offset = neon_element_offset(reg, ele, mop & MO_SIZE); + + switch (mop) { + case MO_UB: + tcg_gen_ld8u_i32(var, cpu_env, offset); + break; + case MO_UW: + tcg_gen_ld16u_i32(var, cpu_env, offset); + break; + case MO_UL: + tcg_gen_ld_i32(var, cpu_env, offset); + break; + default: + g_assert_not_reached(); + } +} + +static void neon_load_element64(TCGv_i64 var, int reg, int ele, MemOp mop) +{ + long offset = neon_element_offset(reg, ele, mop & MO_SIZE); + + switch (mop) { + case MO_UB: + tcg_gen_ld8u_i64(var, cpu_env, offset); + break; + case MO_UW: + tcg_gen_ld16u_i64(var, cpu_env, offset); + break; + case MO_UL: + tcg_gen_ld32u_i64(var, cpu_env, offset); + break; + case MO_Q: + tcg_gen_ld_i64(var, cpu_env, offset); + break; + default: + g_assert_not_reached(); + } +} + +static void neon_store_element(int reg, int ele, MemOp size, TCGv_i32 var) +{ + long offset = neon_element_offset(reg, ele, size); + + switch (size) { + case MO_8: + tcg_gen_st8_i32(var, cpu_env, offset); + break; + case MO_16: + tcg_gen_st16_i32(var, cpu_env, offset); + break; + case MO_32: + tcg_gen_st_i32(var, cpu_env, offset); + break; + default: + g_assert_not_reached(); + } +} + +static void neon_store_element64(int reg, int ele, MemOp size, TCGv_i64 var) +{ + long offset = neon_element_offset(reg, ele, size); + + switch (size) { + case MO_8: + tcg_gen_st8_i64(var, cpu_env, offset); + break; + case MO_16: + tcg_gen_st16_i64(var, cpu_env, offset); + break; + case MO_32: + tcg_gen_st32_i64(var, cpu_env, offset); + break; + case MO_64: + tcg_gen_st_i64(var, cpu_env, offset); + break; + default: + g_assert_not_reached(); + } +} + static bool trans_VCMLA(DisasContext *s, arg_VCMLA *a) { int opr_sz; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ neon_reg_offset (int reg, int n) return vfp_reg_offset(0, sreg); } -/* Return the offset of a 2**SIZE piece of a NEON register, at index ELE, - * where 0 is the least significant end of the register. - */ -static inline long -neon_element_offset(int reg, int element, MemOp size) -{ - int element_size = 1 << size; - int ofs = element * element_size; -#ifdef HOST_WORDS_BIGENDIAN - /* Calculate the offset assuming fully little-endian, - * then XOR to account for the order of the 8-byte units. - */ - if (element_size < 8) { - ofs ^= 8 - element_size; - } -#endif - return neon_reg_offset(reg, 0) + ofs; -} - static TCGv_i32 neon_load_reg(int reg, int pass) { TCGv_i32 tmp = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static TCGv_i32 neon_load_reg(int reg, int pass) return tmp; } -static void neon_load_element(TCGv_i32 var, int reg, int ele, MemOp mop) -{ - long offset = neon_element_offset(reg, ele, mop & MO_SIZE); - - switch (mop) { - case MO_UB: - tcg_gen_ld8u_i32(var, cpu_env, offset); - break; - case MO_UW: - tcg_gen_ld16u_i32(var, cpu_env, offset); - break; - case MO_UL: - tcg_gen_ld_i32(var, cpu_env, offset); - break; - default: - g_assert_not_reached(); - } -} - -static void neon_load_element64(TCGv_i64 var, int reg, int ele, MemOp mop) -{ - long offset = neon_element_offset(reg, ele, mop & MO_SIZE); - - switch (mop) { - case MO_UB: - tcg_gen_ld8u_i64(var, cpu_env, offset); - break; - case MO_UW: - tcg_gen_ld16u_i64(var, cpu_env, offset); - break; - case MO_UL: - tcg_gen_ld32u_i64(var, cpu_env, offset); - break; - case MO_Q: - tcg_gen_ld_i64(var, cpu_env, offset); - break; - default: - g_assert_not_reached(); - } -} - static void neon_store_reg(int reg, int pass, TCGv_i32 var) { tcg_gen_st_i32(var, cpu_env, neon_reg_offset(reg, pass)); tcg_temp_free_i32(var); } -static void neon_store_element(int reg, int ele, MemOp size, TCGv_i32 var) -{ - long offset = neon_element_offset(reg, ele, size); - - switch (size) { - case MO_8: - tcg_gen_st8_i32(var, cpu_env, offset); - break; - case MO_16: - tcg_gen_st16_i32(var, cpu_env, offset); - break; - case MO_32: - tcg_gen_st_i32(var, cpu_env, offset); - break; - default: - g_assert_not_reached(); - } -} - -static void neon_store_element64(int reg, int ele, MemOp size, TCGv_i64 var) -{ - long offset = neon_element_offset(reg, ele, size); - - switch (size) { - case MO_8: - tcg_gen_st8_i64(var, cpu_env, offset); - break; - case MO_16: - tcg_gen_st16_i64(var, cpu_env, offset); - break; - case MO_32: - tcg_gen_st32_i64(var, cpu_env, offset); - break; - case MO_64: - tcg_gen_st_i64(var, cpu_env, offset); - break; - default: - g_assert_not_reached(); - } -} - static inline void neon_load_reg64(TCGv_i64 var, int reg) { tcg_gen_ld_i64(var, cpu_env, vfp_reg_offset(1, reg)); -- 2.20.1 Since commit ba3e7926691ed3 it has been unnecessary for target code to call gen_io_end() after an IO instruction in icount mode; it is sufficient to call gen_io_start() before it and to force the end of the TB. Many now-unnecessary calls to gen_io_end() were removed in commit 9e9b10c6491153b, but some were missed or accidentally added later. Remove unneeded calls from the arm target: * the call in the handling of exception-return-via-LDM is unnecessary, and the code is already forcing end-of-TB * the call in the VFP access check code is more complicated: we weren't ending the TB, so we need to add the code to force that by setting DISAS_UPDATE * the doc comment for ARM_CP_IO doesn't need to mention gen_io_end() any more Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-id: 20200619170324.12093-1-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- target/arm/translate-vfp.inc.c | 7 +++---- target/arm/translate.c | 3 --- 3 files changed, 4 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) * migration or KVM state synchronization. (Typically this is for "registers" * which are actually used as instructions for cache maintenance and so on.) * IO indicates that this register does I/O and therefore its accesses - * need to be surrounded by gen_io_start()/gen_io_end(). In particular, + * need to be marked with gen_io_start() and also end the TB. In particular, * registers which implement clocks or timers require this. * RAISES_EXC is for when the read or write hook might raise an exception; * the generated code will synchronize the CPU state before calling the hook diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool full_vfp_access_check(DisasContext *s, bool ignore_vfp_enabled) if (s->v7m_lspact) { /* * Lazy state saving affects external memory and also the NVIC, - * so we must mark it as an IO operation for icount. + * so we must mark it as an IO operation for icount (and cause + * this to be the last insn in the TB). */ if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + s->base.is_jmp = DISAS_UPDATE; gen_io_start(); } gen_helper_v7m_preserve_fp_state(cpu_env); - if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { - gen_io_end(); - } /* * If the preserve_fp_state helper doesn't throw an exception * then it will clear LSPACT; we don't need to repeat this for diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) gen_io_start(); } gen_helper_cpsr_write_eret(cpu_env, tmp); - if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { - gen_io_end(); - } tcg_temp_free_i32(tmp); /* Must exit loop to check un-masked IRQs */ s->base.is_jmp = DISAS_EXIT; -- 2.20.1 In commit cfdb2c0c95ae9205b0 ("target/arm: Vectorize SABA/UABA") we replaced the old handling of SABA/UABA with a vectorized implementation which returns early rather than falling into the loop-ever-elements code. We forgot to delete the part of the old looping code that did the accumulate step, and Coverity correctly warns (CID 1428955) that this code is now dead. Delete it. Fixes: cfdb2c0c95ae9205b0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200619171547.29780-1-peter.maydell@linaro.org --- target/arm/translate-a64.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn) genfn(tcg_res, tcg_op1, tcg_op2); } - if (opcode == 0xf) { - /* SABA, UABA: accumulating ops */ - static NeonGenTwoOpFn * const fns[3] = { - gen_helper_neon_add_u8, - gen_helper_neon_add_u16, - tcg_gen_add_i32, - }; - - read_vec_element_i32(s, tcg_op1, rd, pass, MO_32); - fns[size](tcg_res, tcg_op1, tcg_res); - } - write_vec_element_i32(s, tcg_res, rd, pass, MO_32); tcg_temp_free_i32(tcg_res); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add a trace event to see when a guest disable/enable the watchdog. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/watchdog/cmsdk-apb-watchdog.c | 1 + hw/watchdog/trace-events | 1 + 2 files changed, 2 insertions(+) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_write(void *opaque, hwaddr offset, break; case A_WDOGLOCK: s->lock = (value != WDOG_UNLOCK_VALUE); + trace_cmsdk_apb_watchdog_lock(s->lock); break; case A_WDOGITCR: if (s->is_luminary) { diff --git a/hw/watchdog/trace-events b/hw/watchdog/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/trace-events +++ b/hw/watchdog/trace-events @@ -XXX,XX +XXX,XX @@ cmsdk_apb_watchdog_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB watchdog read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_watchdog_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB watchdog write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_watchdog_reset(void) "CMSDK APB watchdog: reset" +cmsdk_apb_watchdog_lock(uint32_t lock) "CMSDK APB watchdog: lock %" PRIu32 -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Use self-explicit definitions instead of magic values. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/versatile_i2c.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/hw/i2c/versatile_i2c.c b/hw/i2c/versatile_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/versatile_i2c.c +++ b/hw/i2c/versatile_i2c.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "hw/i2c/bitbang_i2c.h" +#include "hw/registerfields.h" #include "qemu/log.h" #include "qemu/module.h" @@ -XXX,XX +XXX,XX @@ typedef struct VersatileI2CState { int in; } VersatileI2CState; +REG32(CONTROL_GET, 0) +REG32(CONTROL_SET, 0) +REG32(CONTROL_CLR, 4) + static uint64_t versatile_i2c_read(void *opaque, hwaddr offset, unsigned size) { VersatileI2CState *s = (VersatileI2CState *)opaque; - if (offset == 0) { + switch (offset) { + case A_CONTROL_SET: return (s->out & 1) | (s->in << 1); - } else { + default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%x\n", __func__, (int)offset); return -1; @@ -XXX,XX +XXX,XX @@ static void versatile_i2c_write(void *opaque, hwaddr offset, VersatileI2CState *s = (VersatileI2CState *)opaque; switch (offset) { - case 0: + case A_CONTROL_SET: s->out |= value & 3; break; - case 4: + case A_CONTROL_CLR: s->out &= ~value; break; default: -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Use self-explicit definitions instead of magic values. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-4-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/versatile_i2c.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/hw/i2c/versatile_i2c.c b/hw/i2c/versatile_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/versatile_i2c.c +++ b/hw/i2c/versatile_i2c.c @@ -XXX,XX +XXX,XX @@ REG32(CONTROL_GET, 0) REG32(CONTROL_SET, 0) REG32(CONTROL_CLR, 4) +#define SCL BIT(0) +#define SDA BIT(1) + static uint64_t versatile_i2c_read(void *opaque, hwaddr offset, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void versatile_i2c_write(void *opaque, hwaddr offset, qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%x\n", __func__, (int)offset); } - bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0); - s->in = bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0); + bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SCL, (s->out & SCL) != 0); + s->in = bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SDA, (s->out & SDA) != 0); } static const MemoryRegionOps versatile_i2c_ops = { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> 'ARM SBCon two-wire serial bus interface' is the official name describing the pair of registers used to bitbanging I2C in the Versatile boards. Make the private VersatileI2CState structure as public ArmSbconI2CState. Add the TYPE_ARM_SBCON_I2C, alias to our current TYPE_VERSATILE_I2C model. Rename the memory region description as 'arm_sbcon_i2c'. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-5-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/arm_sbcon_i2c.h | 35 ++++++++++++++++++++++++++++++++++ hw/i2c/versatile_i2c.c | 17 +++++------------ MAINTAINERS | 1 + 3 files changed, 41 insertions(+), 12 deletions(-) create mode 100644 include/hw/i2c/arm_sbcon_i2c.h diff --git a/include/hw/i2c/arm_sbcon_i2c.h b/include/hw/i2c/arm_sbcon_i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/arm_sbcon_i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM SBCon two-wire serial bus interface (I2C bitbang) + * a.k.a. + * ARM Versatile I2C controller + * + * Copyright (c) 2006-2007 CodeSourcery. + * Copyright (c) 2012 Oskar Andero <oskar.andero@gmail.com> + * Copyright (C) 2020 Philippe Mathieu-Daudé <f4bug@amsat.org> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ +#ifndef HW_I2C_ARM_SBCON_H +#define HW_I2C_ARM_SBCON_H + +#include "hw/sysbus.h" +#include "hw/i2c/bitbang_i2c.h" + +#define TYPE_VERSATILE_I2C "versatile_i2c" +#define TYPE_ARM_SBCON_I2C TYPE_VERSATILE_I2C + +#define ARM_SBCON_I2C(obj) \ + OBJECT_CHECK(ArmSbconI2CState, (obj), TYPE_ARM_SBCON_I2C) + +typedef struct ArmSbconI2CState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion iomem; + bitbang_i2c_interface bitbang; + int out; + int in; +} ArmSbconI2CState; + +#endif /* HW_I2C_ARM_SBCON_H */ diff --git a/hw/i2c/versatile_i2c.c b/hw/i2c/versatile_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/versatile_i2c.c +++ b/hw/i2c/versatile_i2c.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Versatile I2C controller + * ARM SBCon two-wire serial bus interface (I2C bitbang) + * a.k.a. ARM Versatile I2C controller * * Copyright (c) 2006-2007 CodeSourcery. * Copyright (c) 2012 Oskar Andero <oskar.andero@gmail.com> @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/sysbus.h" -#include "hw/i2c/bitbang_i2c.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/registerfields.h" #include "qemu/log.h" #include "qemu/module.h" -#define TYPE_VERSATILE_I2C "versatile_i2c" #define VERSATILE_I2C(obj) \ OBJECT_CHECK(VersatileI2CState, (obj), TYPE_VERSATILE_I2C) -typedef struct VersatileI2CState { - SysBusDevice parent_obj; +typedef ArmSbconI2CState VersatileI2CState; - MemoryRegion iomem; - bitbang_i2c_interface bitbang; - int out; - int in; -} VersatileI2CState; REG32(CONTROL_GET, 0) REG32(CONTROL_SET, 0) @@ -XXX,XX +XXX,XX @@ static void versatile_i2c_init(Object *obj) bus = i2c_init_bus(dev, "i2c"); bitbang_i2c_init(&s->bitbang, bus); memory_region_init_io(&s->iomem, obj, &versatile_i2c_ops, s, - "versatile_i2c", 0x1000); + "arm_sbcon_i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); } diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/versatile* +F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c F: docs/system/arm/versatile.rst -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> By using the TYPE_* definitions for devices, we can: - quickly find where devices are used with 'git-grep' - easily rename a device (one-line change). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-6-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/realview.c | 3 ++- hw/arm/versatilepb.c | 3 ++- hw/arm/vexpress.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a9mpcore.h" #include "hw/intc/realview_gic.h" #include "hw/irq.h" +#include "hw/i2c/arm_sbcon_i2c.h" #define SMP_BOOT_ADDR 0xe0000000 #define SMP_BOOTREG_ADDR 0x10000030 @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, } } - dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL); + dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); i2c_create_slave(i2c, "ds1338", 0x68); diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/pci/pci.h" #include "hw/i2c/i2c.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/irq.h" #include "hw/boards.h" #include "exec/address-spaces.h" @@ -XXX,XX +XXX,XX @@ static void versatile_init(MachineState *machine, int board_id) /* Add PL031 Real Time Clock. */ sysbus_create_simple("pl031", 0x101e8000, pic[10]); - dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL); + dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); i2c_create_slave(i2c, "ds1338", 0x68); diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/pl011.h" #include "hw/cpu/a9mpcore.h" #include "hw/cpu/a15mpcore.h" +#include "hw/i2c/arm_sbcon_i2c.h" #define VEXPRESS_BOARD_ID 0x8e0 #define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024) @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]); sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]); - dev = sysbus_create_simple("versatile_i2c", map[VE_SERIALDVI], NULL); + dev = sysbus_create_simple(TYPE_VERSATILE_I2C, map[VE_SERIALDVI], NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); i2c_create_slave(i2c, "sii9022", 0x39); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ typedef struct { MemoryRegion blockram_m2; MemoryRegion blockram_m3; MemoryRegion sram; + /* FPGA APB subsystem */ MPS2SCC scc; + /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; } MPS2MachineState; @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) g_assert_not_reached(); } + /* CMSDK APB subsystem */ cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); - object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) qdev_get_gpio_in(armv7m, 10)); sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); + /* FPGA APB subsystem */ object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); sccdev = DEVICE(&mms->scc); qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To differenciate with the CMSDK APB peripheral region, rename this region 'CMSDK AHB peripheral region'. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) */ create_unimplemented_device("CMSDK APB peripheral region @0x40000000", 0x40000000, 0x00010000); - create_unimplemented_device("CMSDK peripheral region @0x40010000", + create_unimplemented_device("CMSDK AHB peripheral region @0x40010000", 0x40010000, 0x00010000); create_unimplemented_device("Extra peripheral region @0x40020000", 0x40020000, 0x00010000); + create_unimplemented_device("RESERVED 4", 0x40030000, 0x001D0000); create_unimplemented_device("VGA", 0x41000000, 0x0200000); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> We already model the CMSDK APB watchdog device, let's use it! Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-9-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 7 +++++++ hw/arm/Kconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); + object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, + TYPE_CMSDK_APB_WATCHDOG); + qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, + qdev_get_gpio_in_named(armv7m, "NMI", 0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0x40008000); /* FPGA APB subsystem */ object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MPS2 select PL080 # DMA controller select SPLIT_IRQ select UNIMP + select CMSDK_APB_WATCHDOG config FSL_IMX7 bool -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Register the GPIO peripherals as unimplemented to better follow their accesses, for example booting Zephyr: ---------------- IN: arm_mps2_pinmux_init 0x00001160: f64f 0231 movw r2, #0xf831 0x00001164: 4b06 ldr r3, [pc, #0x18] 0x00001166: 2000 movs r0, #0 0x00001168: 619a str r2, [r3, #0x18] 0x0000116a: f24c 426f movw r2, #0xc46f 0x0000116e: f503 5380 add.w r3, r3, #0x1000 0x00001172: 619a str r2, [r3, #0x18] 0x00001174: f44f 529e mov.w r2, #0x13c0 0x00001178: f503 5380 add.w r3, r3, #0x1000 0x0000117c: 619a str r2, [r3, #0x18] 0x0000117e: 4770 bx lr cmsdk-ahb-gpio: unimplemented device write (size 4, value 0xf831, offset 0x18) cmsdk-ahb-gpio: unimplemented device write (size 4, value 0xc46f, offset 0x18) cmsdk-ahb-gpio: unimplemented device write (size 4, value 0x13c0, offset 0x18) Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) MemoryRegion *system_memory = get_system_memory(); MachineClass *mc = MACHINE_GET_CLASS(machine); DeviceState *armv7m, *sccdev; + int i; if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { error_report("This board can only be used with CPU %s", @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) */ Object *orgate; DeviceState *orgate_dev; - int i; orgate = object_new(TYPE_OR_IRQ); object_property_set_int(orgate, 6, "num-lines", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) */ Object *orgate; DeviceState *orgate_dev; - int i; orgate = object_new(TYPE_OR_IRQ); object_property_set_int(orgate, 10, "num-lines", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) default: g_assert_not_reached(); } + for (i = 0; i < 4; i++) { + static const hwaddr gpiobase[] = {0x40010000, 0x40011000, + 0x40012000, 0x40013000}; + create_unimplemented_device("cmsdk-ahb-gpio", gpiobase[i], 0x1000); + } /* CMSDK APB subsystem */ cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-11-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" #include "hw/net/lan9118.h" #include "net/net.h" +#include "hw/watchdog/cmsdk-apb-watchdog.h" typedef enum MPS2FPGAType { FPGA_AN385, @@ -XXX,XX +XXX,XX @@ typedef struct { MemoryRegion sram; /* FPGA APB subsystem */ MPS2SCC scc; + MPS2FPGAIO fpgaio; /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; + CMSDKAPBWatchdog watchdog; } MPS2MachineState; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id); sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(sccdev), 0, 0x4002f000); + object_initialize_child(OBJECT(mms), "fpgaio", + &mms->fpgaio, TYPE_MPS2_FPGAIO); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", 25000000); + sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0x40028000); /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> From 'Application Note AN385', chapter 3.9, SPI: The SMM implements five PL022 SPI modules. Two pairs of modules share the same OR-gated IRQ. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-12-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 24 ++++++++++++++++++++++++ hw/arm/Kconfig | 6 +++--- 2 files changed, 27 insertions(+), 3 deletions(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" #include "hw/misc/mps2-fpgaio.h" +#include "hw/ssi/pl022.h" #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", 25000000); sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0x40028000); + sysbus_create_simple(TYPE_PL022, 0x40025000, /* External ADC */ + qdev_get_gpio_in(armv7m, 22)); + for (i = 0; i < 2; i++) { + static const int spi_irqno[] = {11, 24}; + static const hwaddr spibase[] = {0x40020000, /* APB */ + 0x40021000, /* LCD */ + 0x40026000, /* Shield0 */ + 0x40027000}; /* Shield1 */ + DeviceState *orgate_dev; + Object *orgate; + int j; + + orgate = object_new(TYPE_OR_IRQ); + object_property_set_int(orgate, 2, "num-lines", &error_fatal); + orgate_dev = DEVICE(orgate); + qdev_realize(orgate_dev, NULL, &error_fatal); + qdev_connect_gpio_out(orgate_dev, 0, + qdev_get_gpio_in(armv7m, spi_irqno[i])); + for (j = 0; j < 2; j++) { + sysbus_create_simple(TYPE_PL022, spibase[2 * i + j], + qdev_get_gpio_in(orgate_dev, j)); + } + } /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config HIGHBANK select ARM_TIMER # sp804 select ARM_V7M select PL011 # UART - select PL022 # Serial port + select PL022 # SPI select PL031 # RTC select PL061 # GPIO select PL310 # cache controller @@ -XXX,XX +XXX,XX @@ config STELLARIS select CMSDK_APB_WATCHDOG select I2C select PL011 # UART - select PL022 # Serial port + select PL022 # SPI select PL061 # GPIO select SSD0303 # OLED display select SSD0323 # OLED display @@ -XXX,XX +XXX,XX @@ config MPS2 select MPS2_FPGAIO select MPS2_SCC select OR_IRQ - select PL022 # Serial port + select PL022 # SPI select PL080 # DMA controller select SPLIT_IRQ select UNIMP -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> From 'Application Note AN385', chapter 3.14: The SMM implements a simple SBCon interface based on I2C. There are 4 SBCon interfaces on the FPGA APB subsystem. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-13-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 8 ++++++++ hw/arm/Kconfig | 1 + 2 files changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mps2-scc.h" #include "hw/misc/mps2-fpgaio.h" #include "hw/ssi/pl022.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) qdev_get_gpio_in(orgate_dev, j)); } } + for (i = 0; i < 4; i++) { + static const hwaddr i2cbase[] = {0x40022000, /* Touch */ + 0x40023000, /* Audio */ + 0x40029000, /* Shield0 */ + 0x4002a000}; /* Shield1 */ + sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL); + } /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MPS2 select SPLIT_IRQ select UNIMP select CMSDK_APB_WATCHDOG + select VERSATILE_I2C config FSL_IMX7 bool -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-14-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) 0x4002a000}; /* Shield1 */ sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL); } + create_unimplemented_device("i2s", 0x40024000, 0x400); /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> From 'Application Note AN521', chapter 4.7: The SMM implements four SBCon serial modules: One SBCon module for use by the Color LCD touch interface. One SBCon module to configure the audio controller. Two general purpose SBCon modules, that connect to the Expansion headers J7 and J8, are intended for use with the V2C-Shield1 which provide an I2C interface on the headers. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-15-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2-tz.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ typedef struct { TZPPC ppc[5]; TZMPC ssram_mpc[3]; PL022State spi[5]; - UnimplementedDeviceState i2c[4]; + ArmSbconI2CState i2c[4]; UnimplementedDeviceState i2s_audio; UnimplementedDeviceState gpio[4]; UnimplementedDeviceState gfx; @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque, return sysbus_mmio_get_region(s, 0); } +static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + ArmSbconI2CState *i2c = opaque; + SysBusDevice *s; + + object_initialize_child(OBJECT(mms), name, i2c, TYPE_ARM_SBCON_I2C); + s = SYS_BUS_DEVICE(i2c); + sysbus_realize(s, &error_fatal); + return sysbus_mmio_get_region(s, 0); +} + static void mps2tz_common_init(MachineState *machine) { MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) { "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000 }, { "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000 }, { "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000 }, - { "i2c0", make_unimp_dev, &mms->i2c[0], 0x40207000, 0x1000 }, - { "i2c1", make_unimp_dev, &mms->i2c[1], 0x40208000, 0x1000 }, - { "i2c2", make_unimp_dev, &mms->i2c[2], 0x4020c000, 0x1000 }, - { "i2c3", make_unimp_dev, &mms->i2c[3], 0x4020d000, 0x1000 }, + { "i2c0", make_i2c, &mms->i2c[0], 0x40207000, 0x1000 }, + { "i2c1", make_i2c, &mms->i2c[1], 0x40208000, 0x1000 }, + { "i2c2", make_i2c, &mms->i2c[2], 0x4020c000, 0x1000 }, + { "i2c3", make_i2c, &mms->i2c[3], 0x4020d000, 0x1000 }, }, }, { .name = "apb_ppcexp2", -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since commit d70c996df23f, when enabling the PMU we get: $ qemu-system-aarch64 -cpu host,pmu=on -M virt,accel=kvm,gic-version=3 Segmentation fault (core dumped) Thread 1 "qemu-system-aar" received signal SIGSEGV, Segmentation fault. 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588 2588 ret = ioctl(s->fd, type, arg); (gdb) bt #0 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588 #1 0x0000aaaaaae31568 in kvm_check_extension (s=0x0, extension=126) at accel/kvm/kvm-all.c:916 #2 0x0000aaaaaafce254 in kvm_arm_pmu_supported (cpu=0xaaaaac214ab0) at target/arm/kvm.c:213 #3 0x0000aaaaaafc0f94 in arm_set_pmu (obj=0xaaaaac214ab0, value=true, errp=0xffffffffe438) at target/arm/cpu.c:1111 #4 0x0000aaaaab5533ac in property_set_bool (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", opaque=0xaaaaac222730, errp=0xffffffffe438) at qom/object.c:2170 #5 0x0000aaaaab5512f0 in object_property_set (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1328 #6 0x0000aaaaab551e10 in object_property_parse (obj=0xaaaaac214ab0, string=0xaaaaac11b4c0 "on", name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1561 #7 0x0000aaaaab54ee8c in object_apply_global_props (obj=0xaaaaac214ab0, props=0xaaaaac018e20, errp=0xaaaaabd6fd88 <error_fatal>) at qom/object.c:407 #8 0x0000aaaaab1dd5a4 in qdev_prop_set_globals (dev=0xaaaaac214ab0) at hw/core/qdev-properties.c:1218 #9 0x0000aaaaab1d9fac in device_post_init (obj=0xaaaaac214ab0) at hw/core/qdev.c:1050 ... #15 0x0000aaaaab54f310 in object_initialize_with_type (obj=0xaaaaac214ab0, size=52208, type=0xaaaaabe237f0) at qom/object.c:512 #16 0x0000aaaaab54fa24 in object_new_with_type (type=0xaaaaabe237f0) at qom/object.c:687 #17 0x0000aaaaab54fa80 in object_new (typename=0xaaaaabe23970 "host-arm-cpu") at qom/object.c:702 #18 0x0000aaaaaaf04a74 in machvirt_init (machine=0xaaaaac0a8550) at hw/arm/virt.c:1770 #19 0x0000aaaaab1e8720 in machine_run_board_init (machine=0xaaaaac0a8550) at hw/core/machine.c:1138 #20 0x0000aaaaaaf95394 in qemu_init (argc=5, argv=0xffffffffea58, envp=0xffffffffea88) at softmmu/vl.c:4348 #21 0x0000aaaaaada3f74 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at softmmu/main.c:48 This is because in frame #2, cpu->kvm_state is still NULL (the vCPU is not yet realized). KVM has a hard requirement of all cores supporting the same feature set. We only need to check if the accelerator supports a feature, not each vCPU individually. Fix by removing the 'CPUState *cpu' argument from the kvm_arm_<FEATURE>_supported() functions. Fixes: d70c996df23f ('Use CPUState::kvm_state in kvm_arm_pmu_supported') Reported-by: Haibo Xu <haibo.xu@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 21 +++++++++------------ target/arm/cpu.c | 2 +- target/arm/cpu64.c | 10 +++++----- target/arm/kvm.c | 4 ++-- target/arm/kvm64.c | 14 +++++--------- 5 files changed, 22 insertions(+), 29 deletions(-) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ void kvm_arm_add_vcpu_properties(Object *obj); /** * kvm_arm_aarch32_supported: - * @cs: CPUState * - * Returns: true if the KVM VCPU can enable AArch32 mode + * Returns: true if KVM can enable AArch32 mode * and false otherwise. */ -bool kvm_arm_aarch32_supported(CPUState *cs); +bool kvm_arm_aarch32_supported(void); /** * kvm_arm_pmu_supported: - * @cs: CPUState * - * Returns: true if the KVM VCPU can enable its PMU + * Returns: true if KVM can enable the PMU * and false otherwise. */ -bool kvm_arm_pmu_supported(CPUState *cs); +bool kvm_arm_pmu_supported(void); /** * kvm_arm_sve_supported: - * @cs: CPUState * - * Returns true if the KVM VCPU can enable SVE and false otherwise. + * Returns true if KVM can enable SVE and false otherwise. */ -bool kvm_arm_sve_supported(CPUState *cs); +bool kvm_arm_sve_supported(void); /** * kvm_arm_get_max_vm_ipa_size: @@ -XXX,XX +XXX,XX @@ static inline void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) static inline void kvm_arm_add_vcpu_properties(Object *obj) {} -static inline bool kvm_arm_aarch32_supported(CPUState *cs) +static inline bool kvm_arm_aarch32_supported(void) { return false; } -static inline bool kvm_arm_pmu_supported(CPUState *cs) +static inline bool kvm_arm_pmu_supported(void) { return false; } -static inline bool kvm_arm_sve_supported(CPUState *cs) +static inline bool kvm_arm_sve_supported(void) { return false; } diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_set_pmu(Object *obj, bool value, Error **errp) ARMCPU *cpu = ARM_CPU(obj); if (value) { - if (kvm_enabled() && !kvm_arm_pmu_supported(CPU(cpu))) { + if (kvm_enabled() && !kvm_arm_pmu_supported()) { error_setg(errp, "'pmu' feature not supported by KVM on this host"); return; } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) /* Collect the set of vector lengths supported by KVM. */ bitmap_zero(kvm_supported, ARM_MAX_VQ); - if (kvm_enabled() && kvm_arm_sve_supported(CPU(cpu))) { + if (kvm_enabled() && kvm_arm_sve_supported()) { kvm_arm_sve_get_vls(CPU(cpu), kvm_supported); } else if (kvm_enabled()) { assert(!cpu_isar_feature(aa64_sve, cpu)); @@ -XXX,XX +XXX,XX @@ static void cpu_max_set_sve_max_vq(Object *obj, Visitor *v, const char *name, return; } - if (kvm_enabled() && !kvm_arm_sve_supported(CPU(cpu))) { + if (kvm_enabled() && !kvm_arm_sve_supported()) { error_setg(errp, "cannot set sve-max-vq"); error_append_hint(errp, "SVE not supported by KVM on this host\n"); return; @@ -XXX,XX +XXX,XX @@ static void cpu_arm_set_sve_vq(Object *obj, Visitor *v, const char *name, return; } - if (value && kvm_enabled() && !kvm_arm_sve_supported(CPU(cpu))) { + if (value && kvm_enabled() && !kvm_arm_sve_supported()) { error_setg(errp, "cannot enable %s", name); error_append_hint(errp, "SVE not supported by KVM on this host\n"); return; @@ -XXX,XX +XXX,XX @@ static void cpu_arm_set_sve(Object *obj, Visitor *v, const char *name, return; } - if (value && kvm_enabled() && !kvm_arm_sve_supported(CPU(cpu))) { + if (value && kvm_enabled() && !kvm_arm_sve_supported()) { error_setg(errp, "'sve' feature not supported by KVM on this host"); return; } @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported(CPU(cpu))) { + if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { error_setg(errp, "'aarch64' feature cannot be disabled " "unless KVM is enabled and 32-bit EL1 " "is supported"); diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ void kvm_arm_add_vcpu_properties(Object *obj) } } -bool kvm_arm_pmu_supported(CPUState *cpu) +bool kvm_arm_pmu_supported(void) { - return kvm_check_extension(cpu->kvm_state, KVM_CAP_ARM_PMU_V3); + return kvm_check_extension(kvm_state, KVM_CAP_ARM_PMU_V3); } int kvm_arm_get_max_vm_ipa_size(MachineState *ms) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) return true; } -bool kvm_arm_aarch32_supported(CPUState *cpu) +bool kvm_arm_aarch32_supported(void) { - KVMState *s = KVM_STATE(current_accel()); - - return kvm_check_extension(s, KVM_CAP_ARM_EL1_32BIT); + return kvm_check_extension(kvm_state, KVM_CAP_ARM_EL1_32BIT); } -bool kvm_arm_sve_supported(CPUState *cpu) +bool kvm_arm_sve_supported(void) { - KVMState *s = KVM_STATE(current_accel()); - - return kvm_check_extension(s, KVM_CAP_ARM_SVE); + return kvm_check_extension(kvm_state, KVM_CAP_ARM_SVE); } QEMU_BUILD_BUG_ON(KVM_ARM64_SVE_VQ_MIN != 1); @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) env->features &= ~(1ULL << ARM_FEATURE_PMU); } if (cpu_isar_feature(aa64_sve, cpu)) { - assert(kvm_arm_sve_supported(cs)); + assert(kvm_arm_sve_supported()); cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_SVE; } -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Some cpu features may be enabled and disabled for all configurations that support the feature. Let's test that. A recent regression[*] inspired adding these tests. [*] '-cpu host,pmu=on' caused a segfault Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200623090622.30365-2-philmd@redhat.com Message-Id: <20200623082310.17577-1-drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 38 ++++++++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 4 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static bool resp_get_feature(QDict *resp, const char *feature) qobject_unref(_resp); \ }) -#define assert_feature(qts, cpu_type, feature, expected_value) \ +#define resp_assert_feature(resp, feature, expected_value) \ ({ \ - QDict *_resp, *_props; \ + QDict *_props; \ \ - _resp = do_query_no_props(qts, cpu_type); \ g_assert(_resp); \ g_assert(resp_has_props(_resp)); \ _props = resp_get_props(_resp); \ g_assert(qdict_get(_props, feature)); \ g_assert(qdict_get_bool(_props, feature) == (expected_value)); \ +}) + +#define assert_feature(qts, cpu_type, feature, expected_value) \ +({ \ + QDict *_resp; \ + \ + _resp = do_query_no_props(qts, cpu_type); \ + g_assert(_resp); \ + resp_assert_feature(_resp, feature, expected_value); \ + qobject_unref(_resp); \ +}) + +#define assert_set_feature(qts, cpu_type, feature, value) \ +({ \ + const char *_fmt = (value) ? "{ %s: true }" : "{ %s: false }"; \ + QDict *_resp; \ + \ + _resp = do_query(qts, cpu_type, _fmt, feature); \ + g_assert(_resp); \ + resp_assert_feature(_resp, feature, value); \ qobject_unref(_resp); \ }) @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_error(qts, "host", "The CPU type 'host' requires KVM", NULL); /* Test expected feature presence/absence for some cpu types */ - assert_has_feature_enabled(qts, "max", "pmu"); assert_has_feature_enabled(qts, "cortex-a15", "pmu"); assert_has_not_feature(qts, "cortex-a15", "aarch64"); + /* Enabling and disabling pmu should always work. */ + assert_has_feature_enabled(qts, "max", "pmu"); + assert_set_feature(qts, "max", "pmu", false); + assert_set_feature(qts, "max", "pmu", true); + assert_has_not_feature(qts, "max", "kvm-no-adjvtime"); if (g_str_equal(qtest_get_arch(), "aarch64")) { @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) return; } + /* Enabling and disabling kvm-no-adjvtime should always work. */ assert_has_feature_disabled(qts, "host", "kvm-no-adjvtime"); + assert_set_feature(qts, "host", "kvm-no-adjvtime", true); + assert_set_feature(qts, "host", "kvm-no-adjvtime", false); if (g_str_equal(qtest_get_arch(), "aarch64")) { bool kvm_supports_sve; @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) char *error; assert_has_feature_enabled(qts, "host", "aarch64"); + + /* Enabling and disabling pmu should always work. */ assert_has_feature_enabled(qts, "host", "pmu"); + assert_set_feature(qts, "host", "pmu", false); + assert_set_feature(qts, "host", "pmu", true); assert_error(qts, "cortex-a15", "We cannot guarantee the CPU type 'cortex-a15' works " -- 2.20.1 From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> This adds support for memory(pc-dimm) hot remove on arm/virt that uses acpi ged device. NVDIMM hot removal is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Message-id: 20200622124157.20360-1-shameerali.kolothum.thodi@huawei.com Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/acpi/generic_event_device.c | 29 ++++++++++++++++ hw/arm/virt.c | 62 ++++++++++++++++++++++++++++++++-- 2 files changed, 89 insertions(+), 2 deletions(-) diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/generic_event_device.c +++ b/hw/acpi/generic_event_device.c @@ -XXX,XX +XXX,XX @@ static void acpi_ged_device_plug_cb(HotplugHandler *hotplug_dev, } } +static void acpi_ged_unplug_request_cb(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + AcpiGedState *s = ACPI_GED(hotplug_dev); + + if ((object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) && + !(object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)))) { + acpi_memory_unplug_request_cb(hotplug_dev, &s->memhp_state, dev, errp); + } else { + error_setg(errp, "acpi: device unplug request for unsupported device" + " type: %s", object_get_typename(OBJECT(dev))); + } +} + +static void acpi_ged_unplug_cb(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + AcpiGedState *s = ACPI_GED(hotplug_dev); + + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { + acpi_memory_unplug_cb(&s->memhp_state, dev, errp); + } else { + error_setg(errp, "acpi: device unplug for unsupported device" + " type: %s", object_get_typename(OBJECT(dev))); + } +} + static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev) { AcpiGedState *s = ACPI_GED(adev); @@ -XXX,XX +XXX,XX @@ static void acpi_ged_class_init(ObjectClass *class, void *data) dc->vmsd = &vmstate_acpi_ged; hc->plug = acpi_ged_device_plug_cb; + hc->unplug_request = acpi_ged_unplug_request_cb; + hc->unplug = acpi_ged_unplug_cb; adevc->send_event = acpi_ged_send_event; } diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev, } } +static void virt_dimm_unplug_request(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + Error *local_err = NULL; + + if (!vms->acpi_dev) { + error_setg(&local_err, + "memory hotplug is not enabled: missing acpi-ged device"); + goto out; + } + + if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { + error_setg(&local_err, + "nvdimm device hot unplug is not supported yet."); + goto out; + } + + hotplug_handler_unplug_request(HOTPLUG_HANDLER(vms->acpi_dev), dev, + &local_err); +out: + error_propagate(errp, local_err); +} + +static void virt_dimm_unplug(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + Error *local_err = NULL; + + hotplug_handler_unplug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &local_err); + if (local_err) { + goto out; + } + + pc_dimm_unplug(PC_DIMM(dev), MACHINE(vms)); + qdev_unrealize(dev); + +out: + error_propagate(errp, local_err); +} + static void virt_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { - error_setg(errp, "device unplug request for unsupported device" - " type: %s", object_get_typename(OBJECT(dev))); + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { + virt_dimm_unplug_request(hotplug_dev, dev, errp); + } else { + error_setg(errp, "device unplug request for unsupported device" + " type: %s", object_get_typename(OBJECT(dev))); + } +} + +static void virt_machine_device_unplug_cb(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { + virt_dimm_unplug(hotplug_dev, dev, errp); + } else { + error_setg(errp, "virt: device unplug for unsupported device" + " type: %s", object_get_typename(OBJECT(dev))); + } } static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) hc->pre_plug = virt_machine_device_pre_plug_cb; hc->plug = virt_machine_device_plug_cb; hc->unplug_request = virt_machine_device_unplug_request_cb; + hc->unplug = virt_machine_device_unplug_cb; mc->numa_mem_supported = true; mc->nvdimm_supported = true; mc->auto_enable_numa_with_memhp = true; -- 2.20.1 First arm pullreq of the cycle; this is mostly my softfloat NaN handling series. (Lots more in my to-review queue, but I don't like pullreqs growing too close to a hundred patches at a time :-)) thanks -- PMM The following changes since commit 97f2796a3736ed37a1b85dc1c76a6c45b829dd17: Open 10.0 development tree (2024-12-10 17:41:17 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20241211 for you to fetch changes up to 1abe28d519239eea5cf9620bb13149423e5665f8: MAINTAINERS: Add correct email address for Vikram Garhwal (2024-12-11 15:31:09 +0000) ---------------------------------------------------------------- target-arm queue: * hw/net/lan9118: Extract PHY model, reuse with imx_fec, fix bugs * fpu: Make muladd NaN handling runtime-selected, not compile-time * fpu: Make default NaN pattern runtime-selected, not compile-time * fpu: Minor NaN-related cleanups * MAINTAINERS: email address updates ---------------------------------------------------------------- Bernhard Beschow (5): hw/net/lan9118: Extract lan9118_phy hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations hw/net/lan9118_phy: Fix off-by-one error in MII_ANLPAR register hw/net/lan9118_phy: Reuse MII constants hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement Leif Lindholm (1): MAINTAINERS: update email address for Leif Lindholm Peter Maydell (54): fpu: handle raising Invalid for infzero in pick_nan_muladd fpu: Check for default_nan_mode before calling pickNaNMulAdd softfloat: Allow runtime choice of inf * 0 + NaN result tests/fp: Explicitly set inf-zero-nan rule target/arm: Set FloatInfZeroNaNRule explicitly target/s390: Set FloatInfZeroNaNRule explicitly target/ppc: Set FloatInfZeroNaNRule explicitly target/mips: Set FloatInfZeroNaNRule explicitly target/sparc: Set FloatInfZeroNaNRule explicitly target/xtensa: Set FloatInfZeroNaNRule explicitly target/x86: Set FloatInfZeroNaNRule explicitly target/loongarch: Set FloatInfZeroNaNRule explicitly target/hppa: Set FloatInfZeroNaNRule explicitly softfloat: Pass have_snan to pickNaNMulAdd softfloat: Allow runtime choice of NaN propagation for muladd tests/fp: Explicitly set 3-NaN propagation rule target/arm: Set Float3NaNPropRule explicitly target/loongarch: Set Float3NaNPropRule explicitly target/ppc: Set Float3NaNPropRule explicitly target/s390x: Set Float3NaNPropRule explicitly target/sparc: Set Float3NaNPropRule explicitly target/mips: Set Float3NaNPropRule explicitly target/xtensa: Set Float3NaNPropRule explicitly target/i386: Set Float3NaNPropRule explicitly target/hppa: Set Float3NaNPropRule explicitly fpu: Remove use_first_nan field from float_status target/m68k: Don't pass NULL float_status to floatx80_default_nan() softfloat: Create floatx80 default NaN from parts64_default_nan target/loongarch: Use normal float_status in fclass_s and fclass_d helpers target/m68k: In frem helper, initialize local float_status from env->fp_status target/m68k: Init local float_status from env fp_status in gdb get/set reg target/sparc: Initialize local scratch float_status from env->fp_status target/ppc: Use env->fp_status in helper_compute_fprf functions fpu: Allow runtime choice of default NaN value tests/fp: Set default NaN pattern explicitly target/microblaze: Set default NaN pattern explicitly target/i386: Set default NaN pattern explicitly target/hppa: Set default NaN pattern explicitly target/alpha: Set default NaN pattern explicitly target/arm: Set default NaN pattern explicitly target/loongarch: Set default NaN pattern explicitly target/m68k: Set default NaN pattern explicitly target/mips: Set default NaN pattern explicitly target/openrisc: Set default NaN pattern explicitly target/ppc: Set default NaN pattern explicitly target/sh4: Set default NaN pattern explicitly target/rx: Set default NaN pattern explicitly target/s390x: Set default NaN pattern explicitly target/sparc: Set default NaN pattern explicitly target/xtensa: Set default NaN pattern explicitly target/hexagon: Set default NaN pattern explicitly target/riscv: Set default NaN pattern explicitly target/tricore: Set default NaN pattern explicitly fpu: Remove default handling for dnan_pattern Richard Henderson (11): target/arm: Copy entire float_status in is_ebf softfloat: Inline pickNaNMulAdd softfloat: Use goto for default nan case in pick_nan_muladd softfloat: Remove which from parts_pick_nan_muladd softfloat: Pad array size in pick_nan_muladd softfloat: Move propagateFloatx80NaN to softfloat.c softfloat: Use parts_pick_nan in propagateFloatx80NaN softfloat: Inline pickNaN softfloat: Share code between parts_pick_nan cases softfloat: Sink frac_cmp in parts_pick_nan until needed softfloat: Replace WHICH with RET in parts_pick_nan Vikram Garhwal (1): MAINTAINERS: Add correct email address for Vikram Garhwal MAINTAINERS | 4 +- include/fpu/softfloat-helpers.h | 38 +++- include/fpu/softfloat-types.h | 89 +++++++- include/hw/net/imx_fec.h | 9 +- include/hw/net/lan9118_phy.h | 37 ++++ include/hw/net/mii.h | 6 + target/mips/fpu_helper.h | 20 ++ target/sparc/helper.h | 4 +- fpu/softfloat.c | 19 ++ hw/net/imx_fec.c | 146 ++------------ hw/net/lan9118.c | 137 ++----------- hw/net/lan9118_phy.c | 222 ++++++++++++++++++++ linux-user/arm/nwfpe/fpa11.c | 5 + target/alpha/cpu.c | 2 + target/arm/cpu.c | 10 + target/arm/tcg/vec_helper.c | 20 +- target/hexagon/cpu.c | 2 + target/hppa/fpu_helper.c | 12 ++ target/i386/tcg/fpu_helper.c | 12 ++ target/loongarch/tcg/fpu_helper.c | 14 +- target/m68k/cpu.c | 14 +- target/m68k/fpu_helper.c | 6 +- target/m68k/helper.c | 6 +- target/microblaze/cpu.c | 2 + target/mips/msa.c | 10 + target/openrisc/cpu.c | 2 + target/ppc/cpu_init.c | 19 ++ target/ppc/fpu_helper.c | 3 +- target/riscv/cpu.c | 2 + target/rx/cpu.c | 2 + target/s390x/cpu.c | 5 + target/sh4/cpu.c | 2 + target/sparc/cpu.c | 6 + target/sparc/fop_helper.c | 8 +- target/sparc/translate.c | 4 +- target/tricore/helper.c | 2 + target/xtensa/cpu.c | 4 + target/xtensa/fpu_helper.c | 3 +- tests/fp/fp-bench.c | 7 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 7 + fpu/softfloat-parts.c.inc | 152 +++++++++++--- fpu/softfloat-specialize.c.inc | 412 ++------------------------------------ .mailmap | 5 +- hw/net/Kconfig | 5 + hw/net/meson.build | 1 + hw/net/trace-events | 10 +- 47 files changed, 778 insertions(+), 730 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c From: Bernhard Beschow <shentey@gmail.com> A very similar implementation of the same device exists in imx_fec. Prepare for a common implementation by extracting a device model into its own files. Some migration state has been moved into the new device model which breaks migration compatibility for the following machines: * smdkc210 * realview-* * vexpress-* * kzm * mps2-* While breaking migration ABI, fix the size of the MII registers to be 16 bit, as defined by IEEE 802.3u. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118_phy.h | 37 ++++++++ hw/net/lan9118.c | 137 +++++----------------------- hw/net/lan9118_phy.c | 169 +++++++++++++++++++++++++++++++++++ hw/net/Kconfig | 4 + hw/net/meson.build | 1 + 5 files changed, 233 insertions(+), 115 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c diff --git a/include/hw/net/lan9118_phy.h b/include/hw/net/lan9118_phy.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118_phy.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_PHY_H +#define HW_NET_LAN9118_PHY_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +#define TYPE_LAN9118_PHY "lan9118-phy" +OBJECT_DECLARE_SIMPLE_TYPE(Lan9118PhyState, LAN9118_PHY) + +typedef struct Lan9118PhyState { + SysBusDevice parent_obj; + + uint16_t status; + uint16_t control; + uint16_t advertise; + uint16_t ints; + uint16_t int_mask; + qemu_irq irq; + bool link_down; +} Lan9118PhyState; + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down); +void lan9118_phy_reset(Lan9118PhyState *s); +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg); +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val); + +#endif diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "net/net.h" #include "net/eth.h" #include "hw/irq.h" +#include "hw/net/lan9118_phy.h" #include "hw/net/lan9118.h" #include "hw/ptimer.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0) #define MAC_CR_RXEN 0x00000004 #define MAC_CR_RESERVED 0x7f404213 -#define PHY_INT_ENERGYON 0x80 -#define PHY_INT_AUTONEG_COMPLETE 0x40 -#define PHY_INT_FAULT 0x20 -#define PHY_INT_DOWN 0x10 -#define PHY_INT_AUTONEG_LP 0x08 -#define PHY_INT_PARFAULT 0x04 -#define PHY_INT_AUTONEG_PAGE 0x02 - #define GPT_TIMER_EN 0x20000000 /* @@ -XXX,XX +XXX,XX @@ struct lan9118_state { uint32_t mac_mii_data; uint32_t mac_flow; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; int32_t eeprom_writable; uint8_t eeprom[128]; @@ -XXX,XX +XXX,XX @@ struct lan9118_state { static const VMStateDescription vmstate_lan9118 = { .name = "lan9118", - .version_id = 2, - .minimum_version_id = 1, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_PTIMER(timer, lan9118_state), VMSTATE_UINT32(irq_cfg, lan9118_state), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118 = { VMSTATE_UINT32(mac_mii_acc, lan9118_state), VMSTATE_UINT32(mac_mii_data, lan9118_state), VMSTATE_UINT32(mac_flow, lan9118_state), - VMSTATE_UINT32(phy_status, lan9118_state), - VMSTATE_UINT32(phy_control, lan9118_state), - VMSTATE_UINT32(phy_advertise, lan9118_state), - VMSTATE_UINT32(phy_int, lan9118_state), - VMSTATE_UINT32(phy_int_mask, lan9118_state), VMSTATE_INT32(eeprom_writable, lan9118_state), VMSTATE_UINT8_ARRAY(eeprom, lan9118_state, 128), VMSTATE_INT32(tx_fifo_size, lan9118_state), @@ -XXX,XX +XXX,XX @@ static void lan9118_reload_eeprom(lan9118_state *s) lan9118_mac_changed(s); } -static void phy_update_irq(lan9118_state *s) +static void lan9118_update_irq(void *opaque, int n, int level) { - if (s->phy_int & s->phy_int_mask) { + lan9118_state *s = opaque; + + if (level) { s->int_sts |= PHY_INT; } else { s->int_sts &= ~PHY_INT; @@ -XXX,XX +XXX,XX @@ static void phy_update_irq(lan9118_state *s) lan9118_update(s); } -static void phy_update_link(lan9118_state *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - phy_update_irq(s); -} - static void lan9118_set_link(NetClientState *nc) { - phy_update_link(qemu_get_nic_opaque(nc)); -} - -static void phy_reset(lan9118_state *s) -{ - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - phy_update_link(s); + lan9118_phy_update_link(&LAN9118(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static void lan9118_reset(DeviceState *d) @@ -XXX,XX +XXX,XX @@ static void lan9118_reset(DeviceState *d) s->read_word_n = 0; s->write_word_n = 0; - phy_reset(s); - s->eeprom_writable = 0; lan9118_reload_eeprom(s); } @@ -XXX,XX +XXX,XX @@ static void do_tx_packet(lan9118_state *s) uint32_t status; /* FIXME: Honor TX disable, and allow queueing of packets. */ - if (s->phy_control & 0x4000) { + if (s->mii.control & 0x4000) { /* This assumes the receive routine doesn't touch the VLANClient. */ qemu_receive_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len); } else { @@ -XXX,XX +XXX,XX @@ static void tx_fifo_push(lan9118_state *s, uint32_t val) } } -static uint32_t do_phy_read(lan9118_state *s, int reg) -{ - uint32_t val; - - switch (reg) { - case 0: /* Basic Control */ - return s->phy_control; - case 1: /* Basic Status */ - return s->phy_status; - case 2: /* ID1 */ - return 0x0007; - case 3: /* ID2 */ - return 0xc0d1; - case 4: /* Auto-neg advertisement */ - return s->phy_advertise; - case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; - case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - phy_update_irq(s); - return val; - case 30: /* Interrupt mask */ - return s->phy_int_mask; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_read: PHY read reg %d\n", reg); - return 0; - } -} - -static void do_phy_write(lan9118_state *s, int reg, uint32_t val) -{ - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - phy_reset(s); - break; - } - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - /* TODO 17, 18, 27, 31 */ - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - phy_update_irq(s); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_write: PHY write reg %d = 0x%04x\n", reg, val); - } -} - static void do_mac_write(lan9118_state *s, int reg, uint32_t val) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static void do_mac_write(lan9118_state *s, int reg, uint32_t val) if (val & 2) { DPRINTF("PHY write %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); - do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data); + lan9118_phy_write(&s->mii, (val >> 6) & 0x1f, s->mac_mii_data); } else { - s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f); + s->mac_mii_data = lan9118_phy_read(&s->mii, (val >> 6) & 0x1f); DPRINTF("PHY read %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); } @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, break; case CSR_PMT_CTRL: if (val & 0x400) { - phy_reset(s); + lan9118_phy_reset(&s->mii); } s->pmt_ctrl &= ~0x34e; s->pmt_ctrl |= (val & 0x34e); @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) const MemoryRegionOps *mem_ops = s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops; + qemu_init_irq(&s->mii_irq, lan9118_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + memory_region_init_io(&s->mmio, OBJECT(dev), mem_ops, s, "lan9118-mmio", 0x100); sysbus_init_mmio(sbd, &s->mmio); diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This code is licensed under the GNU GPL v2 + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" +#include "hw/resettable.h" +#include "migration/vmstate.h" +#include "qemu/log.h" + +#define PHY_INT_ENERGYON (1 << 7) +#define PHY_INT_AUTONEG_COMPLETE (1 << 6) +#define PHY_INT_FAULT (1 << 5) +#define PHY_INT_DOWN (1 << 4) +#define PHY_INT_AUTONEG_LP (1 << 3) +#define PHY_INT_PARFAULT (1 << 2) +#define PHY_INT_AUTONEG_PAGE (1 << 1) + +static void lan9118_phy_update_irq(Lan9118PhyState *s) +{ + qemu_set_irq(s->irq, !!(s->ints & s->int_mask)); +} + +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) +{ + uint16_t val; + + switch (reg) { + case 0: /* Basic Control */ + return s->control; + case 1: /* Basic Status */ + return s->status; + case 2: /* ID1 */ + return 0x0007; + case 3: /* ID2 */ + return 0xc0d1; + case 4: /* Auto-neg advertisement */ + return s->advertise; + case 5: /* Auto-neg Link Partner Ability */ + return 0x0f71; + case 6: /* Auto-neg Expansion */ + return 1; + /* TODO 17, 18, 27, 29, 30, 31 */ + case 29: /* Interrupt source. */ + val = s->ints; + s->ints = 0; + lan9118_phy_update_irq(s); + return val; + case 30: /* Interrupt mask */ + return s->int_mask; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_read: PHY read reg %d\n", reg); + return 0; + } +} + +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) +{ + switch (reg) { + case 0: /* Basic Control */ + if (val & 0x8000) { + lan9118_phy_reset(s); + break; + } + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } + break; + case 4: /* Auto-neg advertisement */ + s->advertise = (val & 0x2d7f) | 0x80; + break; + /* TODO 17, 18, 27, 31 */ + case 30: /* Interrupt mask */ + s->int_mask = val & 0xff; + lan9118_phy_update_irq(s); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + } +} + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) +{ + s->link_down = link_down; + + /* Autonegotiation status mirrors link status. */ + if (link_down) { + s->status &= ~0x0024; + s->ints |= PHY_INT_DOWN; + } else { + s->status |= 0x0024; + s->ints |= PHY_INT_ENERGYON; + s->ints |= PHY_INT_AUTONEG_COMPLETE; + } + lan9118_phy_update_irq(s); +} + +void lan9118_phy_reset(Lan9118PhyState *s) +{ + s->control = 0x3000; + s->status = 0x7809; + s->advertise = 0x01e1; + s->int_mask = 0; + s->ints = 0; + lan9118_phy_update_link(s, s->link_down); +} + +static void lan9118_phy_reset_hold(Object *obj, ResetType type) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + lan9118_phy_reset(s); +} + +static void lan9118_phy_init(Object *obj) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + qdev_init_gpio_out(DEVICE(s), &s->irq, 1); +} + +static const VMStateDescription vmstate_lan9118_phy = { + .name = "lan9118-phy", + .version_id = 1, + .minimum_version_id = 1, + .fields = (const VMStateField[]) { + VMSTATE_UINT16(control, Lan9118PhyState), + VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(advertise, Lan9118PhyState), + VMSTATE_UINT16(ints, Lan9118PhyState), + VMSTATE_UINT16(int_mask, Lan9118PhyState), + VMSTATE_BOOL(link_down, Lan9118PhyState), + VMSTATE_END_OF_LIST() + } +}; + +static void lan9118_phy_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + rc->phases.hold = lan9118_phy_reset_hold; + dc->vmsd = &vmstate_lan9118_phy; +} + +static const TypeInfo types[] = { + { + .name = TYPE_LAN9118_PHY, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Lan9118PhyState), + .instance_init = lan9118_phy_init, + .class_init = lan9118_phy_class_init, + } +}; + +DEFINE_TYPES(types) diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config VMXNET3_PCI config SMC91C111 bool +config LAN9118_PHY + bool + config LAN9118 bool + select LAN9118_PHY select PTIMER config NE2000_ISA diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_VMXNET3_PCI', if_true: files('vmxnet3.c')) system_ss.add(when: 'CONFIG_SMC91C111', if_true: files('smc91c111.c')) system_ss.add(when: 'CONFIG_LAN9118', if_true: files('lan9118.c')) +system_ss.add(when: 'CONFIG_LAN9118_PHY', if_true: files('lan9118_phy.c')) system_ss.add(when: 'CONFIG_NE2000_ISA', if_true: files('ne2000-isa.c')) system_ss.add(when: 'CONFIG_OPENCORES_ETH', if_true: files('opencores_eth.c')) system_ss.add(when: 'CONFIG_XGMAC', if_true: files('xgmac.c')) -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> imx_fec models the same PHY as lan9118_phy. The code is almost the same with imx_fec having more logging and tracing. Merge these improvements into lan9118_phy and reuse in imx_fec to fix the code duplication. Some migration state how resides in the new device model which breaks migration compatibility for the following machines: * imx25-pdk * sabrelite * mcimx7d-sabre * mcimx6ul-evk Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-3-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 9 ++- hw/net/imx_fec.c | 146 ++++----------------------------------- hw/net/lan9118_phy.c | 82 ++++++++++++++++------ hw/net/Kconfig | 1 + hw/net/trace-events | 10 +-- 5 files changed, 85 insertions(+), 163 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXFECState, IMX_FEC) #define TYPE_IMX_ENET "imx.enet" #include "hw/sysbus.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" #include "net/net.h" #define ENET_EIR 1 @@ -XXX,XX +XXX,XX @@ struct IMXFECState { uint32_t tx_descriptor[ENET_TX_RING_NUM]; uint32_t tx_ring_num; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; uint32_t phy_num; bool phy_connected; struct IMXFECState *phy_consumer; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth_txdescs = { static const VMStateDescription vmstate_imx_eth = { .name = TYPE_IMX_FEC, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX), VMSTATE_UINT32(rx_descriptor, IMXFECState), VMSTATE_UINT32(tx_descriptor[0], IMXFECState), - VMSTATE_UINT32(phy_status, IMXFECState), - VMSTATE_UINT32(phy_control, IMXFECState), - VMSTATE_UINT32(phy_advertise, IMXFECState), - VMSTATE_UINT32(phy_int, IMXFECState), - VMSTATE_UINT32(phy_int_mask, IMXFECState), VMSTATE_END_OF_LIST() }, .subsections = (const VMStateDescription * const []) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth = { }, }; -#define PHY_INT_ENERGYON (1 << 7) -#define PHY_INT_AUTONEG_COMPLETE (1 << 6) -#define PHY_INT_FAULT (1 << 5) -#define PHY_INT_DOWN (1 << 4) -#define PHY_INT_AUTONEG_LP (1 << 3) -#define PHY_INT_PARFAULT (1 << 2) -#define PHY_INT_AUTONEG_PAGE (1 << 1) - static void imx_eth_update(IMXFECState *s); /* @@ -XXX,XX +XXX,XX @@ static void imx_eth_update(IMXFECState *s); * For now we don't handle any GPIO/interrupt line, so the OS will * have to poll for the PHY status. */ -static void imx_phy_update_irq(IMXFECState *s) +static void imx_phy_update_irq(void *opaque, int n, int level) { - imx_eth_update(s); -} - -static void imx_phy_update_link(IMXFECState *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - trace_imx_phy_update_link("down"); - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - trace_imx_phy_update_link("up"); - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - imx_phy_update_irq(s); + imx_eth_update(opaque); } static void imx_eth_set_link(NetClientState *nc) { - imx_phy_update_link(IMX_FEC(qemu_get_nic_opaque(nc))); -} - -static void imx_phy_reset(IMXFECState *s) -{ - trace_imx_phy_reset(); - - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - imx_phy_update_link(s); + lan9118_phy_update_link(&IMX_FEC(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static uint32_t imx_phy_read(IMXFECState *s, int reg) { - uint32_t val; uint32_t phy = reg / 32; if (!s->phy_connected) { @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) reg %= 32; - switch (reg) { - case 0: /* Basic Control */ - val = s->phy_control; - break; - case 1: /* Basic Status */ - val = s->phy_status; - break; - case 2: /* ID1 */ - val = 0x0007; - break; - case 3: /* ID2 */ - val = 0xc0d1; - break; - case 4: /* Auto-neg advertisement */ - val = s->phy_advertise; - break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; - break; - case 6: /* Auto-neg Expansion */ - val = 1; - break; - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - imx_phy_update_irq(s); - break; - case 30: /* Interrupt mask */ - val = s->phy_int_mask; - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy]%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - } - - trace_imx_phy_read(val, phy, reg); - - return val; + return lan9118_phy_read(&s->mii, reg); } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) @@ -XXX,XX +XXX,XX @@ static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) reg %= 32; - trace_imx_phy_write(val, phy, reg); - - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - imx_phy_reset(s); - } else { - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - imx_phy_update_irq(s); - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy)%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - break; - } + lan9118_phy_write(&s->mii, reg, val); } static void imx_fec_read_bd(IMXFECBufDesc *bd, dma_addr_t addr) @@ -XXX,XX +XXX,XX @@ static void imx_eth_reset(DeviceState *d) s->rx_descriptor = 0; memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor)); - - /* We also reset the PHY */ - imx_phy_reset(s); } static uint32_t imx_default_read(IMXFECState *s, uint32_t index) @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq[0]); sysbus_init_irq(sbd, &s->irq[1]); + qemu_init_irq(&s->mii_irq, imx_phy_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + qemu_macaddr_default_if_unset(&s->conf.macaddr); s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf, diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ * Copyright (c) 2009 CodeSourcery, LLC. * Written by Paul Brook * + * Copyright (c) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net> + * * This code is licensed under the GNU GPL v2 * * Contributions after 2012-01-13 are licensed under the terms of the @@ -XXX,XX +XXX,XX @@ #include "hw/resettable.h" #include "migration/vmstate.h" #include "qemu/log.h" +#include "trace.h" #define PHY_INT_ENERGYON (1 << 7) #define PHY_INT_AUTONEG_COMPLETE (1 << 6) @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) switch (reg) { case 0: /* Basic Control */ - return s->control; + val = s->control; + break; case 1: /* Basic Status */ - return s->status; + val = s->status; + break; case 2: /* ID1 */ - return 0x0007; + val = 0x0007; + break; case 3: /* ID2 */ - return 0xc0d1; + val = 0xc0d1; + break; case 4: /* Auto-neg advertisement */ - return s->advertise; + val = s->advertise; + break; case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; + val = 0x0f71; + break; case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ + val = 1; + break; case 29: /* Interrupt source. */ val = s->ints; s->ints = 0; lan9118_phy_update_irq(s); - return val; + break; case 30: /* Interrupt mask */ - return s->int_mask; + val = s->int_mask; + break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + val = 0; + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_read: PHY read reg %d\n", reg); - return 0; + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + val = 0; + break; } + + trace_lan9118_phy_read(val, reg); + + return val; } void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) { + trace_lan9118_phy_write(val, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { lan9118_phy_reset(s); - break; - } - s->control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + } else { + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } } break; case 4: /* Auto-neg advertisement */ s->advertise = (val & 0x2d7f) | 0x80; break; - /* TODO 17, 18, 27, 31 */ case 30: /* Interrupt mask */ s->int_mask = val & 0xff; lan9118_phy_update_irq(s); break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + break; } } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { + trace_lan9118_phy_update_link("down"); s->status &= ~0x0024; s->ints |= PHY_INT_DOWN; } else { + trace_lan9118_phy_update_link("up"); s->status |= 0x0024; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) void lan9118_phy_reset(Lan9118PhyState *s) { + trace_lan9118_phy_reset(); + s->control = 0x3000; s->status = 0x7809; s->advertise = 0x01e1; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_phy = { .version_id = 1, .minimum_version_id = 1, .fields = (const VMStateField[]) { - VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(advertise, Lan9118PhyState), VMSTATE_UINT16(ints, Lan9118PhyState), VMSTATE_UINT16(int_mask, Lan9118PhyState), diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_SUN8I_EMAC config IMX_FEC bool + select LAN9118_PHY config CADENCE bool diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 +# lan9118_phy.c +lan9118_phy_read(uint16_t val, int reg) "[0x%02x] -> 0x%04" PRIx16 +lan9118_phy_write(uint16_t val, int reg) "[0x%02x] <- 0x%04" PRIx16 +lan9118_phy_update_link(const char *s) "%s" +lan9118_phy_reset(void) "" + # lance.c lance_mem_readw(uint64_t addr, uint32_t ret) "addr=0x%"PRIx64"val=0x%04x" lance_mem_writew(uint64_t addr, uint32_t val) "addr=0x%"PRIx64"val=0x%04x" @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" imx_phy_read_num(int phy, int configured) "read request from unconfigured phy %d (configured %d)" -imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_write_num(int phy, int configured) "write request to unconfigured phy %d (configured %d)" -imx_phy_update_link(const char *s) "%s" -imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" imx_enet_read_bd(uint64_t addr, int flags, int len, int data, int options, int status) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x option 0x%04x status 0x%04x" imx_eth_tx_bd_busy(void) "tx_bd ran out of descriptors to transmit" -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Turns 0x70 into 0xe0 (== 0x70 << 1) which adds the missing MII_ANLPAR_TX and fixes the MSB of selector field to be zero, as specified in the datasheet. Fixes: 2a424990170b "LAN9118 emulation" Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-4-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) val = s->advertise; break; case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; + val = 0x0fe1; break; case 6: /* Auto-neg Expansion */ val = 1; -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Prefer named constants over magic values for better readability. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-5-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/mii.h | 6 +++++ hw/net/lan9118_phy.c | 63 ++++++++++++++++++++++++++++---------------- 2 files changed, 46 insertions(+), 23 deletions(-) diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/mii.h +++ b/include/hw/net/mii.h @@ -XXX,XX +XXX,XX @@ #define MII_BMSR_JABBER (1 << 1) /* Jabber detected */ #define MII_BMSR_EXTCAP (1 << 0) /* Ext-reg capability */ +#define MII_ANAR_RFAULT (1 << 13) /* Say we can detect faults */ #define MII_ANAR_PAUSE_ASYM (1 << 11) /* Try for asymmetric pause */ #define MII_ANAR_PAUSE (1 << 10) /* Try for pause */ #define MII_ANAR_TXFD (1 << 8) @@ -XXX,XX +XXX,XX @@ #define MII_ANAR_10FD (1 << 6) #define MII_ANAR_10 (1 << 5) #define MII_ANAR_CSMACD (1 << 0) +#define MII_ANAR_SELECT (0x001f) /* Selector bits */ #define MII_ANLPAR_ACK (1 << 14) #define MII_ANLPAR_PAUSEASY (1 << 11) /* can pause asymmetrically */ @@ -XXX,XX +XXX,XX @@ #define RTL8201CP_PHYID1 0x0000 #define RTL8201CP_PHYID2 0x8201 +/* SMSC LAN9118 */ +#define SMSCLAN9118_PHYID1 0x0007 +#define SMSCLAN9118_PHYID2 0xc0d1 + /* RealTek 8211E */ #define RTL8211E_PHYID1 0x001c #define RTL8211E_PHYID2 0xc915 diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/net/lan9118_phy.h" +#include "hw/net/mii.h" #include "hw/irq.h" #include "hw/resettable.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) uint16_t val; switch (reg) { - case 0: /* Basic Control */ + case MII_BMCR: val = s->control; break; - case 1: /* Basic Status */ + case MII_BMSR: val = s->status; break; - case 2: /* ID1 */ - val = 0x0007; + case MII_PHYID1: + val = SMSCLAN9118_PHYID1; break; - case 3: /* ID2 */ - val = 0xc0d1; + case MII_PHYID2: + val = SMSCLAN9118_PHYID2; break; - case 4: /* Auto-neg advertisement */ + case MII_ANAR: val = s->advertise; break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0fe1; + case MII_ANLPAR: + val = MII_ANLPAR_PAUSEASY | MII_ANLPAR_PAUSE | MII_ANLPAR_T4 | + MII_ANLPAR_TXFD | MII_ANLPAR_TX | MII_ANLPAR_10FD | + MII_ANLPAR_10 | MII_ANLPAR_CSMACD; break; - case 6: /* Auto-neg Expansion */ - val = 1; + case MII_ANER: + val = MII_ANER_NWAY; break; case 29: /* Interrupt source. */ val = s->ints; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) trace_lan9118_phy_write(val, reg); switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { + case MII_BMCR: + if (val & MII_BMCR_RESET) { lan9118_phy_reset(s); } else { - s->control = val & 0x7980; + s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 | + MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD | + MII_BMCR_CTST); /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + if (val & MII_BMCR_AUTOEN) { + s->status |= MII_BMSR_AN_COMP; } } break; - case 4: /* Auto-neg advertisement */ - s->advertise = (val & 0x2d7f) | 0x80; + case MII_ANAR: + s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | + MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | + MII_ANAR_SELECT)) + | MII_ANAR_TX; break; case 30: /* Interrupt mask */ s->int_mask = val & 0xff; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { trace_lan9118_phy_update_link("down"); - s->status &= ~0x0024; + s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST); s->ints |= PHY_INT_DOWN; } else { trace_lan9118_phy_update_link("up"); - s->status |= 0x0024; + s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_reset(Lan9118PhyState *s) { trace_lan9118_phy_reset(); - s->control = 0x3000; - s->status = 0x7809; - s->advertise = 0x01e1; + s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100; + s->status = MII_BMSR_100TX_FD + | MII_BMSR_100TX_HD + | MII_BMSR_10T_FD + | MII_BMSR_10T_HD + | MII_BMSR_AUTONEG + | MII_BMSR_EXTCAP; + s->advertise = MII_ANAR_TXFD + | MII_ANAR_TX + | MII_ANAR_10FD + | MII_ANAR_10 + | MII_ANAR_CSMACD; s->int_mask = 0; s->ints = 0; lan9118_phy_update_link(s, s->link_down); -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> The real device advertises this mode and the device model already advertises 100 mbps half duplex and 10 mbps full+half duplex. So advertise this mode to make the model more realistic. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-6-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) break; case MII_ANAR: s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | - MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | - MII_ANAR_SELECT)) + MII_ANAR_PAUSE | MII_ANAR_TXFD | MII_ANAR_10FD | + MII_ANAR_10 | MII_ANAR_SELECT)) | MII_ANAR_TX; break; case 30: /* Interrupt mask */ -- 2.34.1 For IEEE fused multiply-add, the (0 * inf) + NaN case should raise Invalid for the multiplication of 0 by infinity. Currently we handle this in the per-architecture ifdef ladder in pickNaNMulAdd(). However, since this isn't really architecture specific we can hoist it up to the generic code. For the cases where the infzero test in pickNaNMulAdd was returning 2, we can delete the check entirely and allow the code to fall into the normal pick-a-NaN handling, because this will return 2 anyway (input 'c' being the only NaN in this case). For the cases where infzero was returning 3 to indicate "return the default NaN", we must retain that "return 3". For Arm, this looks like it might be a behaviour change because we used to set float_flag_invalid | float_flag_invalid_imz only if C is a quiet NaN. However, it is not, because Arm target code never looks at float_flag_invalid_imz, and for the (0 * inf) + SNaN case we already raised float_flag_invalid via the "abc_mask & float_cmask_snan" check in pick_nan_muladd. For any target architecture using the "default implementation" at the bottom of the ifdef, this is a behaviour change but will be fixing a bug (where we failed to raise the Invalid exception for (0 * inf + QNaN). The architectures using the default case are: * hppa * i386 * sh4 * tricore The x86, Tricore and SH4 CPU architecture manuals are clear that this should have raised Invalid; HPPA is a bit vaguer but still seems clear enough. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-2-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 13 +++++++------ fpu/softfloat-specialize.c.inc | 29 +---------------------------- 2 files changed, 8 insertions(+), 34 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, int ab_mask, int abc_mask) { int which; + bool infzero = (ab_mask == float_cmask_infzero); if (unlikely(abc_mask & float_cmask_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, - ab_mask == float_cmask_infzero, s); + if (infzero) { + /* This is (0 * inf) + NaN or (inf * 0) + NaN */ + float_raise(float_flag_invalid | float_flag_invalid_imz, s); + } + + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); if (s->default_nan_mode || which == 3) { - /* - * Note that this check is after pickNaNMulAdd so that function - * has an opportunity to set the Invalid flag for infzero. - */ parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * the default NaN */ if (infzero && is_qnan(c_cls)) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * case sets InvalidOp and returns the default NaN */ if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } /* Prefer sNaN over qNaN, in the a, b, c order. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } + /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * to return an input NaN if we have one (ie c) rather than generating * a default NaN */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_RISCV) - /* For RISC-V, InvalidOp is set when multiplicands are Inf and zero */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - } return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } #elif defined(TARGET_SPARC) - /* For (inf,0,nan) return c. */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer SNaN over QNaN, order C, B, A. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns * an input NaN if we have one (ie c). */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } if (status->use_first_nan) { if (is_nan(a_cls)) { return 0; -- 2.34.1 If the target sets default_nan_mode then we're always going to return the default NaN, and pickNaNMulAdd() no longer has any side effects. For consistency with pickNaN(), check for default_nan_mode before calling pickNaNMulAdd(). When we convert pickNaNMulAdd() to allow runtime selection of the NaN propagation rule, this means we won't have to make the targets which use default_nan_mode also set a propagation rule. Since RiscV always uses default_nan_mode, this allows us to remove its ifdef case from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-3-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 8 ++++++-- fpu/softfloat-specialize.c.inc | 9 +++++++-- 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, float_raise(float_flag_invalid | float_flag_invalid_imz, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + if (s->default_nan_mode) { + which = 3; + } else { + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + } - if (s->default_nan_mode || which == 3) { + if (which == 3) { parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ + assert(!status->default_nan_mode); #if defined(TARGET_ARM) /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns * the default NaN @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { return 1; } -#elif defined(TARGET_RISCV) - return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { return 3; -- 2.34.1 IEEE 758 does not define a fixed rule for what NaN to return in the case of a fused multiply-add of inf * 0 + NaN. Different architectures thus do different things: * some return the default NaN * some return the input NaN * Arm returns the default NaN if the input NaN is quiet, and the input NaN if it is signalling We want to make this logic be runtime selected rather than hardcoded into the binary, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. Note that four architectures both use the muladd softfloat functions and did not have a branch of the ifdef ladder to specify their behaviour (and so were ending up with the "default" case, probably wrongly): i386, HPPA, SH4 and Tricore. SH4 and Tricore both set default_nan_mode, and so will never get into pickNaNMulAdd(). For HPPA and i386 we retain the same behaviour as the old default-case, which is to not ever return the default NaN. This might not be correct but it is not a behaviour change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-4-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 ++++ include/fpu/softfloat-types.h | 23 +++++++++ fpu/softfloat-specialize.c.inc | 91 ++++++++++++++++++++++----------- 3 files changed, 95 insertions(+), 30 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, + float_status *status) +{ + status->float_infzeronan_rule = rule; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) +{ + return status->float_infzeronan_rule; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * Rule for result of fused multiply-add 0 * Inf + NaN. + * This must be a NaN, but implementations differ on whether this + * is the input NaN or the default NaN. + * + * You don't need to set this if default_nan_mode is enabled. + * When not in default-NaN mode, it is an error for the target + * not to set the rule in float_status if it uses muladd, and we + * will assert if we need to handle an input NaN and no rule was + * selected. + */ +typedef enum __attribute__((__packed__)) { + /* No propagation rule specified */ + float_infzeronan_none = 0, + /* Result is never the default NaN (so always the input NaN) */ + float_infzeronan_dnan_never, + /* Result is always the default NaN */ + float_infzeronan_dnan_always, + /* Result is the default NaN if the input NaN is quiet */ + float_infzeronan_dnan_if_qnan, +} FloatInfZeroNaNRule; + /* * Floating Point Status. Individual architectures may maintain * several versions of float_status for different functions. The @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ bool flush_to_zero; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + FloatInfZeroNaNRule rule = status->float_infzeronan_rule; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * specify. */ assert(!status->default_nan_mode); + + if (rule == float_infzeronan_none) { + /* + * Temporarily fall back to ifdef ladder + */ #if defined(TARGET_ARM) - /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns - * the default NaN - */ - if (infzero && is_qnan(c_cls)) { - return 3; + /* + * For ARM, the (inf,zero,qnan) case returns the default NaN, + * but (inf,zero,snan) returns the input NaN. + */ + rule = float_infzeronan_dnan_if_qnan; +#elif defined(TARGET_MIPS) + if (snan_bit_is_one(status)) { + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN + */ + rule = float_infzeronan_dnan_always; + } else { + /* + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + rule = float_infzeronan_dnan_never; + } +#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ + defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ + defined(TARGET_I386) || defined(TARGET_LOONGARCH) + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + rule = float_infzeronan_dnan_never; +#elif defined(TARGET_S390X) + rule = float_infzeronan_dnan_always; +#endif } + if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the default NaN here, + * and some return the input NaN. + */ + switch (rule) { + case float_infzeronan_dnan_never: + return 2; + case float_infzeronan_dnan_always: + return 3; + case float_infzeronan_dnan_if_qnan: + return is_qnan(c_cls) ? 3 : 2; + default: + g_assert_not_reached(); + } + } + +#if defined(TARGET_ARM) + /* This looks different from the ARM ARM pseudocode, because the ARM ARM * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } #elif defined(TARGET_MIPS) if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - if (infzero) { - return 3; - } /* Prefer sNaN over qNaN, in the a, b, c order. */ if (is_snan(a_cls)) { return 0; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } #elif defined(TARGET_LOONGARCH64) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_PPC) - /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_S390X) - if (infzero) { - return 3; - } - if (is_snan(a_cls)) { return 0; } else if (is_snan(b_cls)) { -- 2.34.1 Explicitly set a rule in the softfloat tests for the inf-zero-nan muladd special case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_infzeronan_dnan_if_qnan. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241202131347.498124-5-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 5 +++++ tests/fp/fp-test.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) { bench_func_t f; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) { unsigned int i; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); verCases_maxErrorCount = n_max_errors; -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the Arm target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-6-peter.maydell@linaro.org --- target/arm/cpu.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, + * and the input NaN if it is signalling */ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_ARM) - /* - * For ARM, the (inf,zero,qnan) case returns the default NaN, - * but (inf,zero,snan) returns the input NaN. - */ - rule = float_infzeronan_dnan_if_qnan; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { /* * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for s390, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-7-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_infzeronan_rule(float_infzeronan_dnan_always, + &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * a default NaN */ rule = float_infzeronan_dnan_never; -#elif defined(TARGET_S390X) - rule = float_infzeronan_dnan_always; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the PPC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-8-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ rule = float_infzeronan_dnan_never; } -#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ +#elif defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - /* - * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the MIPS target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-9-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 9 +++++++++ target/mips/msa.c | 4 ++++ fpu/softfloat-specialize.c.inc | 16 +--------------- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_flush_mode(CPUMIPSState *env) static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); + FloatInfZeroNaNRule izn_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ set_snan_bit_is_one(!nan2008, &env->active_fpu.fp_status); set_default_nan_mode(!nan2008, &env->active_fpu.fp_status); + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN. + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c'. + */ + izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; + set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* set proper signanling bit meaning ("1" means "quiet") */ set_snan_bit_is_one(0, &env->active_tc.msa_fp_status); + + /* Inf * 0 + NaN returns the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, + &env->active_tc.msa_fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - rule = float_infzeronan_dnan_always; - } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - rule = float_infzeronan_dnan_never; - } -#elif defined(TARGET_SPARC) || \ +#if defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the SPARC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-10-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_SPARC) || \ - defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the xtensa target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-11-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) reset_mmu(env); cs->halted = env->runstall; #endif + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the x86 target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-12-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->mmx_status); set_float_2nan_prop_rule(float_2nan_prop_x87, &env->sse_status); + /* + * Only SSE has multiply-add instructions. In the SDM Section 14.5.2 + * "Fused-Multiply-ADD (FMA) Numeric Behavior" the NaN handling is + * specified -- for 0 * inf + NaN the input NaN is selected, and if + * there are multiple input NaNs they are selected in the order a, b, c. + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * Temporarily fall back to ifdef ladder */ #if defined(TARGET_HPPA) || \ - defined(TARGET_I386) || defined(TARGET_LOONGARCH) + defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the loongarch target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-13-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 5 +++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) &env->fp_status); set_flush_to_zero(0, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_HPPA) || \ - defined(TARGET_LOONGARCH) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ +#if defined(TARGET_HPPA) rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the HPPA target, so we can remove the ifdef from pickNaNMulAdd(). As this is the last target to be converted to explicitly setting the rule, we can remove the fallback code in pickNaNMulAdd() entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-14-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 13 +------------ 2 files changed, 3 insertions(+), 12 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { - FloatInfZeroNaNRule rule = status->float_infzeronan_rule; - /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ assert(!status->default_nan_mode); - if (rule == float_infzeronan_none) { - /* - * Temporarily fall back to ifdef ladder - */ -#if defined(TARGET_HPPA) - rule = float_infzeronan_dnan_never; -#endif - } - if (infzero) { /* * Inf * 0 + NaN -- some implementations return the default NaN here, * and some return the input NaN. */ - switch (rule) { + switch (status->float_infzeronan_rule) { case float_infzeronan_dnan_never: return 2; case float_infzeronan_dnan_always: -- 2.34.1 The new implementation of pickNaNMulAdd() will find it convenient to know whether at least one of the three arguments to the muladd was a signaling NaN. We already calculate that in the caller, so pass it in as a new bool have_snan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-15-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 5 +++-- fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, { int which; bool infzero = (ab_mask == float_cmask_infzero); + bool have_snan = (abc_mask & float_cmask_snan); - if (unlikely(abc_mask & float_cmask_snan)) { + if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, if (s->default_nan_mode) { which = 3; } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, | Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN *----------------------------------------------------------------------------*/ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, float_status *status) + bool infzero, bool have_snan, float_status *status) { /* * We guarantee not to require the target to tell us how to -- 2.34.1 IEEE 758 does not define a fixed rule for which NaN to pick as the result if both operands of a 3-operand fused multiply-add operation are NaNs. As a result different architectures have ended up with different rules for propagating NaNs. QEMU currently hardcodes the NaN propagation logic into the binary because pickNaNMulAdd() has an ifdef ladder for different targets. We want to make the propagation rule instead be selectable at runtime, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. It's valid not to set a propagation rule if default_nan_mode is enabled, because in that case there's no need to pick a NaN; all the callers of pickNaNMulAdd() catch this case and skip calling it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-16-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++ include/fpu/softfloat-types.h | 55 +++++++++++ fpu/softfloat-specialize.c.inc | 167 ++++++++------------------------ 3 files changed, 107 insertions(+), 126 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_3nan_prop_rule(Float3NaNPropRule rule, + float_status *status) +{ + status->float_3nan_prop_rule = rule; +} + static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, float_status *status) { @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline Float3NaNPropRule get_float_3nan_prop_rule(float_status *status) +{ + return status->float_3nan_prop_rule; +} + static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) { return status->float_infzeronan_rule; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ this code that are retained. #ifndef SOFTFLOAT_TYPES_H #define SOFTFLOAT_TYPES_H +#include "hw/registerfields.h" + /* * Software IEC/IEEE floating-point types. */ @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * 3-input NaN propagation rule, for fused multiply-add. Individual + * architectures have different rules for which input NaN is + * propagated to the output when there is more than one NaN on the + * input. + * + * If default_nan_mode is enabled then it is valid not to set a NaN + * propagation rule, because the softfloat code guarantees not to try + * to pick a NaN to propagate in default NaN mode. When not in + * default-NaN mode, it is an error for the target not to set the rule + * in float_status if it uses a muladd, and we will assert if we need + * to handle an input NaN and no rule was selected. + * + * The naming scheme for Float3NaNPropRule values is: + * float_3nan_prop_s_abc: + * = "Prefer SNaN over QNaN, then operand A over B over C" + * float_3nan_prop_abc: + * = "Prefer A over B over C regardless of SNaN vs QNAN" + * + * For QEMU, the multiply-add operation is A * B + C. + */ + +/* + * We set the Float3NaNPropRule enum values up so we can select the + * right value in pickNaNMulAdd in a data driven way. + */ +FIELD(3NAN, 1ST, 0, 2) /* which operand is most preferred ? */ +FIELD(3NAN, 2ND, 2, 2) /* which operand is next most preferred ? */ +FIELD(3NAN, 3RD, 4, 2) /* which operand is least preferred ? */ +FIELD(3NAN, SNAN, 6, 1) /* do we prefer SNaN over QNaN ? */ + +#define PROPRULE(X, Y, Z) \ + ((X << R_3NAN_1ST_SHIFT) | (Y << R_3NAN_2ND_SHIFT) | (Z << R_3NAN_3RD_SHIFT)) + +typedef enum __attribute__((__packed__)) { + float_3nan_prop_none = 0, /* No propagation rule specified */ + float_3nan_prop_abc = PROPRULE(0, 1, 2), + float_3nan_prop_acb = PROPRULE(0, 2, 1), + float_3nan_prop_bac = PROPRULE(1, 0, 2), + float_3nan_prop_bca = PROPRULE(1, 2, 0), + float_3nan_prop_cab = PROPRULE(2, 0, 1), + float_3nan_prop_cba = PROPRULE(2, 1, 0), + float_3nan_prop_s_abc = float_3nan_prop_abc | R_3NAN_SNAN_MASK, + float_3nan_prop_s_acb = float_3nan_prop_acb | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bac = float_3nan_prop_bac | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bca = float_3nan_prop_bca | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cab = float_3nan_prop_cab | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cba = float_3nan_prop_cba | R_3NAN_SNAN_MASK, +} Float3NaNPropRule; + +#undef PROPRULE + /* * Rule for result of fused multiply-add 0 * Inf + NaN. * This must be a NaN, but implementations differ on whether this @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + Float3NaNPropRule float_3nan_prop_rule; FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, bool have_snan, float_status *status) { + FloatClass cls[3] = { a_cls, b_cls, c_cls }; + Float3NaNPropRule rule = status->float_3nan_prop_rule; + int which; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } + if (rule == float_3nan_prop_none) { #if defined(TARGET_ARM) - - /* This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. - */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + /* + * This looks different from the ARM ARM pseudocode, because the ARM ARM + * puts the operands to a fused mac operation (a*b)+c in the order c,a,b + */ + rule = float_3nan_prop_s_cab; #elif defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* Prefer sNaN over qNaN, in the a, b, c order. */ - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; + if (snan_bit_is_one(status)) { + rule = float_3nan_prop_s_abc; } else { - return 2; + rule = float_3nan_prop_s_cab; } - } else { - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - } #elif defined(TARGET_LOONGARCH64) - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(c_cls)) { - return 2; - } else { - return 1; - } + /* + * If fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + */ + rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) - /* Prefer SNaN over QNaN, order C, B, A. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } + rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) - /* - * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns - * an input NaN if we have one (ie c). - */ - if (status->use_first_nan) { - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; + if (status->use_first_nan) { + rule = float_3nan_prop_abc; } else { - return 2; + rule = float_3nan_prop_cba; } - } else { - if (is_nan(c_cls)) { - return 2; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - } #else - /* A default implementation: prefer a to b to c. - * This is unlikely to actually match any real implementation. - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_abc; #endif + } + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } + return which; } /*---------------------------------------------------------------------------- -- 2.34.1 Explicitly set a rule in the softfloat tests for propagating NaNs in the muladd case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_3nan_prop_s_cab. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-17-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test.c | 1 + 2 files changed, 2 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-18-peter.maydell@linaro.org --- target/arm/cpu.c | 5 +++++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 3-input NaN propagation prefers SNaN over QNaN, and then + * operand C over A over B (see FPProcessNaNs3() pseudocode, + * but note that for QEMU muladd is a * b + c, whereas for + * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling */ @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_ARM) - /* - * This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b - */ - rule = float_3nan_prop_s_cab; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { rule = float_3nan_prop_s_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for loongarch, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-19-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) * case sets InvalidOp and returns the input value 'c' */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_LOONGARCH64) - rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) /* * If fRA is a NaN return it; otherwise if fRB is a NaN return it; -- 2.34.1 Set the Float3NaNPropRule explicitly for PPC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-20-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 6 ------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * NaN propagation for fused multiply-add: + * if fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + * whereas QEMU labels the operands as (a * b) + c. + */ + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->vec_status); /* * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer * to return an input NaN if we have one (ie c) rather than generating diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_PPC) - /* - * If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) -- 2.34.1 Set the Float3NaNPropRule explicitly for s390x, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-21-peter.maydell@linaro.org --- target/s390x/cpu.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); /* fall through */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_S390X) - rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) -- 2.34.1 Set the Float3NaNPropRule explicitly for SPARC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-22-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For fused-multiply add, prefer SNaN over QNaN, then C->B->A */ + set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_SPARC) - rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-23-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 4 ++++ target/mips/msa.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); FloatInfZeroNaNRule izn_rule; + Float3NaNPropRule nan3_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); + nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; + set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->active_tc.msa_fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, + &env->active_tc.msa_fp_status); + /* clear float_status exception flags */ set_float_exception_flags(0, &env->active_tc.msa_fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - rule = float_3nan_prop_s_abc; - } else { - rule = float_3nan_prop_s_cab; - } -#elif defined(TARGET_XTENSA) +#if defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for xtensa, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-24-peter.maydell@linaro.org --- target/xtensa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 8 -------- 2 files changed, 2 insertions(+), 8 deletions(-) diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); + set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, + &env->fp_status); } void HELPER(wur_fpu2k_fcr)(CPUXtensaState *env, uint32_t v) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_XTENSA) - if (status->use_first_nan) { - rule = float_3nan_prop_abc; - } else { - rule = float_3nan_prop_cba; - } -#else rule = float_3nan_prop_abc; -#endif } assert(rule != float_3nan_prop_none); -- 2.34.1 Set the Float3NaNPropRule explicitly for i386. We had no i386-specific behaviour in the old ifdef ladder, so we were using the default "prefer a then b then c" fallback; this is actually the correct per-the-spec handling for i386. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-25-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) * there are multiple input NaNs they are selected in the order a, b, c. */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) -- 2.34.1 Set the Float3NaNPropRule explicitly for HPPA, and remove the ifdef from pickNaNMulAdd(). HPPA is the only target that was using the default branch of the ifdef ladder (other targets either do not use muladd or set default_nan_mode), so we can remove the ifdef fallback entirely now (allowing the "rule not set" case to fall into the default of the switch statement and assert). We add a TODO note that the HPPA rule is probably wrong; this is not a behavioural change for this refactoring. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-26-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * TODO: The HPPA architecture reference only documents its NaN + * propagation rule for 2-operand operations. Testing on real hardware + * might be necessary to confirm whether this order for muladd is correct. + * Not preferring the SNaN is almost certainly incorrect as it diverges + * from the documented rules for 2-operand operations. + */ + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } - if (rule == float_3nan_prop_none) { - rule = float_3nan_prop_abc; - } - assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ -- 2.34.1 The use_first_nan field in float_status was an xtensa-specific way to select at runtime from two different NaN propagation rules. Now that xtensa is using the target-agnostic NaN propagation rule selection that we've just added, we can remove use_first_nan, because there is no longer any code that reads it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-27-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 5 ----- include/fpu/softfloat-types.h | 1 - target/xtensa/fpu_helper.c | 1 - 3 files changed, 7 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_snan_bit_is_one(bool val, float_status *status) status->snan_bit_is_one = val; } -static inline void set_use_first_nan(bool val, float_status *status) -{ - status->use_first_nan = val; -} - static inline void set_no_signaling_nans(bool val, float_status *status) { status->no_signaling_nans = val; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { * softfloat-specialize.inc.c) */ bool snan_bit_is_one; - bool use_first_nan; bool no_signaling_nans; /* should overflowed results subtract re_bias to its exponent? */ bool rebias_overflow; diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ static const struct { void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) { - set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, -- 2.34.1 Currently m68k_cpu_reset_hold() calls floatx80_default_nan(NULL) to get the NaN bit pattern to reset the FPU registers. This works because it happens that our implementation of floatx80_default_nan() doesn't actually look at the float_status pointer except for TARGET_MIPS. However, this isn't guaranteed, and to be able to remove the ifdef in floatx80_default_nan() we're going to need a real float_status here. Rearrange m68k_cpu_reset_hold() so that we initialize env->fp_status earlier, and thus can pass it to floatx80_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-28-peter.maydell@linaro.org --- target/m68k/cpu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); CPUM68KState *env = cpu_env(cs); - floatx80 nan = floatx80_default_nan(NULL); + floatx80 nan; int i; if (mcc->parent_phases.hold) { @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) #else cpu_m68k_set_sr(env, SR_S | SR_I); #endif - for (i = 0; i < 8; i++) { - env->fregs[i].d = nan; - } - cpu_m68k_set_fpcr(env, 0); /* * M68000 FAMILY PROGRAMMER'S REFERENCE MANUAL * 3.4 FLOATING-POINT INSTRUCTION DETAILS @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + + nan = floatx80_default_nan(&env->fp_status); + for (i = 0; i < 8; i++) { + env->fregs[i].d = nan; + } + cpu_m68k_set_fpcr(env, 0); env->fpsr = 0; /* TODO: We should set PC from the interrupt vector. */ -- 2.34.1 We create our 128-bit default NaN by calling parts64_default_nan() and then adjusting the result. We can do the same trick for creating the floatx80 default NaN, which lets us drop a target ifdef. floatx80 is used only by: i386 m68k arm nwfpe old floating-point emulation emulation support (which is essentially dead, especially the parts involving floatx80) PPC (only in the xsrqpxp instruction, which just rounds an input value by converting to floatx80 and back, so will never generate the default NaN) The floatx80 default NaN as currently implemented is: m68k: sign = 0, exp = 1...1, int = 1, frac = 1....1 i386: sign = 1, exp = 1...1, int = 1, frac = 10...0 These are the same as the parts64_default_nan for these architectures. This is technically a possible behaviour change for arm linux-user nwfpe emulation emulation, because the default NaN will now have the sign bit clear. But we were already generating a different floatx80 default NaN from the real kernel emulation we are supposedly following, which appears to use an all-bits-1 value: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L267 This won't affect the only "real" use of the nwfpe emulation, which is ancient binaries that used it as part of the old floating point calling convention; that only uses loads and stores of 32 and 64 bit floats, not any of the floatx80 behaviour the original hardware had. We also get the nwfpe float64 default NaN value wrong: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L166 so if we ever cared about this obscure corner the right fix would be to correct that so nwfpe used its own default-NaN setting rather than the Arm VFP one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-29-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts128_silence_nan(FloatParts128 *p, float_status *status) floatx80 floatx80_default_nan(float_status *status) { floatx80 r; + /* + * Extrapolate from the choices made by parts64_default_nan to fill + * in the floatx80 format. We assume that floatx80's explicit + * integer bit is always set (this is true for i386 and m68k, + * which are the only real users of this format). + */ + FloatParts64 p64; + parts64_default_nan(&p64, status); - /* None of the targets that have snan_bit_is_one use floatx80. */ - assert(!snan_bit_is_one(status)); -#if defined(TARGET_M68K) - r.low = UINT64_C(0xFFFFFFFFFFFFFFFF); - r.high = 0x7FFF; -#else - /* X86 */ - r.low = UINT64_C(0xC000000000000000); - r.high = 0xFFFF; -#endif + r.high = 0x7FFF | (p64.sign << 15); + r.low = (1ULL << DECOMPOSED_BINARY_POINT) | p64.frac; return r; } -- 2.34.1 In target/loongarch's helper_fclass_s() and helper_fclass_d() we pass a zero-initialized float_status struct to float32_is_quiet_nan() and float64_is_quiet_nan(), with the cryptic comment "for snan_bit_is_one". This pattern appears to have been copied from target/riscv, where it is used because the functions there do not have ready access to the CPU state struct. The comment presumably refers to the fact that the main reason the is_quiet_nan() functions want the float_state is because they want to know about the snan_bit_is_one config. In the loongarch helpers, though, we have the CPU state struct to hand. Use the usual env->fp_status here. This avoids our needing to track that we need to update the initializer of the local float_status structs when the core softfloat code adds new options for targets to configure their behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-30-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_s(CPULoongArchState *env, uint64_t fj) } else if (float32_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float32_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float32_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float32_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_d(CPULoongArchState *env, uint64_t fj) } else if (float64_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float64_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float64_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float64_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } -- 2.34.1 In the frem helper, we have a local float_status because we want to execute the floatx80_div() with a custom rounding mode. Instead of zero-initializing the local float_status and then having to set it up with the m68k standard behaviour (including the NaN propagation rule and copying the rounding precision from env->fp_status), initialize it as a complete copy of env->fp_status. This will avoid our having to add new code in this function for every new config knob we add to fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-31-peter.maydell@linaro.org --- target/m68k/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/m68k/fpu_helper.c b/target/m68k/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/fpu_helper.c +++ b/target/m68k/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(frem)(CPUM68KState *env, FPReg *res, FPReg *val0, FPReg *val1) fp_rem = floatx80_rem(val1->d, val0->d, &env->fp_status); if (!floatx80_is_any_nan(fp_rem)) { - float_status fp_status = { }; + /* Use local temporary fp_status to set different rounding mode */ + float_status fp_status = env->fp_status; uint32_t quotient; int sign; /* Calculate quotient directly using round to nearest mode */ - set_float_2nan_prop_rule(float_2nan_prop_ab, &fp_status); set_float_rounding_mode(float_round_nearest_even, &fp_status); - set_floatx80_rounding_precision( - get_floatx80_rounding_precision(&env->fp_status), &fp_status); fp_quot.d = floatx80_div(val1->d, val0->d, &fp_status); sign = extractFloatx80Sign(fp_quot.d); -- 2.34.1 In cf_fpu_gdb_get_reg() and cf_fpu_gdb_set_reg() we do the conversion from float64 to floatx80 using a scratch float_status, because we don't want the conversion to affect the CPU's floating point exception status. Currently we use a zero-initialized float_status. This will get steadily more awkward as we add config knobs to float_status that the target must initialize. Avoid having to add any of that configuration here by instead initializing our local float_status from the env->fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-32-peter.maydell@linaro.org --- target/m68k/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/m68k/helper.c b/target/m68k/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/helper.c +++ b/target/m68k/helper.c @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_get_reg(CPUState *cs, GByteArray *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; return gdb_get_reg64(mem_buf, floatx80_to_float64(env->fregs[n].d, &s)); } switch (n) { @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_set_reg(CPUState *cs, uint8_t *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; env->fregs[n].d = float64_to_floatx80(ldq_be_p(mem_buf), &s); return 8; } -- 2.34.1 In the helper functions flcmps and flcmpd we use a scratch float_status so that we don't change the CPU state if the comparison raises any floating point exception flags. Instead of zero-initializing this scratch float_status, initialize it as a copy of env->fp_status. This avoids the need to explicitly initialize settings like the NaN propagation rule or others we might add to softfloat in future. To do this we need to pass the CPU env pointer in to the helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-33-peter.maydell@linaro.org --- target/sparc/helper.h | 4 ++-- target/sparc/fop_helper.c | 8 ++++---- target/sparc/translate.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/target/sparc/helper.h b/target/sparc/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/helper.h +++ b/target/sparc/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(fcmpd, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmped, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmpq, TCG_CALL_NO_WG, i32, env, i128, i128) DEF_HELPER_FLAGS_3(fcmpeq, TCG_CALL_NO_WG, i32, env, i128, i128) -DEF_HELPER_FLAGS_2(flcmps, TCG_CALL_NO_RWG_SE, i32, f32, f32) -DEF_HELPER_FLAGS_2(flcmpd, TCG_CALL_NO_RWG_SE, i32, f64, f64) +DEF_HELPER_FLAGS_3(flcmps, TCG_CALL_NO_RWG_SE, i32, env, f32, f32) +DEF_HELPER_FLAGS_3(flcmpd, TCG_CALL_NO_RWG_SE, i32, env, f64, f64) DEF_HELPER_2(raise_exception, noreturn, env, int) DEF_HELPER_FLAGS_3(faddd, TCG_CALL_NO_WG, f64, env, f64, f64) diff --git a/target/sparc/fop_helper.c b/target/sparc/fop_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/fop_helper.c +++ b/target/sparc/fop_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t helper_fcmpeq(CPUSPARCState *env, Int128 src1, Int128 src2) return finish_fcmp(env, r, GETPC()); } -uint32_t helper_flcmps(float32 src1, float32 src2) +uint32_t helper_flcmps(CPUSPARCState *env, float32 src1, float32 src2) { /* * FLCMP never raises an exception nor modifies any FSR fields. * Perform the comparison with a dummy fp environment. */ - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); @@ -XXX,XX +XXX,XX @@ uint32_t helper_flcmps(float32 src1, float32 src2) g_assert_not_reached(); } -uint32_t helper_flcmpd(float64 src1, float64 src2) +uint32_t helper_flcmpd(CPUSPARCState *env, float64 src1, float64 src2) { - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); diff --git a/target/sparc/translate.c b/target/sparc/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/translate.c +++ b/target/sparc/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPs(DisasContext *dc, arg_FLCMPs *a) src1 = gen_load_fpr_F(dc, a->rs1); src2 = gen_load_fpr_F(dc, a->rs2); - gen_helper_flcmps(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmps(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPd(DisasContext *dc, arg_FLCMPd *a) src1 = gen_load_fpr_D(dc, a->rs1); src2 = gen_load_fpr_D(dc, a->rs2); - gen_helper_flcmpd(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmpd(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } -- 2.34.1 In the helper_compute_fprf functions, we pass a dummy float_status in to the is_signaling_nan() function. This is unnecessary, because we have convenient access to the CPU env pointer here and that is already set up with the correct values for the snan_bit_is_one and no_signaling_nans config settings. is_signaling_nan() doesn't ever update the fp_status with any exception flags, so there is no reason not to use env->fp_status here. Use env->fp_status instead of the dummy fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-34-peter.maydell@linaro.org --- target/ppc/fpu_helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/ppc/fpu_helper.c b/target/ppc/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/fpu_helper.c +++ b/target/ppc/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void helper_compute_fprf_##tp(CPUPPCState *env, tp arg) \ } else if (tp##_is_infinity(arg)) { \ fprf = neg ? 0x09 << FPSCR_FPRF : 0x05 << FPSCR_FPRF; \ } else { \ - float_status dummy = { }; /* snan_bit_is_one = 0 */ \ - if (tp##_is_signaling_nan(arg, &dummy)) { \ + if (tp##_is_signaling_nan(arg, &env->fp_status)) { \ fprf = 0x00 << FPSCR_FPRF; \ } else { \ fprf = 0x11 << FPSCR_FPRF; \ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Now that float_status has a bunch of fp parameters, it is easier to copy an existing structure than create one from scratch. Begin by copying the structure that corresponds to the FPSR and make only the adjustments required for BFloat16 semantics. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/vec_helper.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vec_helper.c +++ b/target/arm/tcg/vec_helper.c @@ -XXX,XX +XXX,XX @@ bool is_ebf(CPUARMState *env, float_status *statusp, float_status *oddstatusp) * no effect on AArch32 instructions. */ bool ebf = is_a64(env) && env->vfp.fpcr & FPCR_EBF; - *statusp = (float_status){ - .tininess_before_rounding = float_tininess_before_rounding, - .float_rounding_mode = float_round_to_odd_inf, - .flush_to_zero = true, - .flush_inputs_to_zero = true, - .default_nan_mode = true, - }; + + *statusp = env->vfp.fp_status; + set_default_nan_mode(true, statusp); if (ebf) { - float_status *fpst = &env->vfp.fp_status; - set_flush_to_zero(get_flush_to_zero(fpst), statusp); - set_flush_inputs_to_zero(get_flush_inputs_to_zero(fpst), statusp); - set_float_rounding_mode(get_float_rounding_mode(fpst), statusp); - /* EBF=1 needs to do a step with round-to-odd semantics */ *oddstatusp = *statusp; set_float_rounding_mode(float_round_to_odd, oddstatusp); + } else { + set_flush_to_zero(true, statusp); + set_flush_inputs_to_zero(true, statusp); + set_float_rounding_mode(float_round_to_odd_inf, statusp); } - return ebf; } -- 2.34.1 Currently we hardcode the default NaN value in parts64_default_nan() using a compile-time ifdef ladder. This is awkward for two cases: * for single-QEMU-binary we can't hard-code target-specifics like this * for Arm FEAT_AFP the default NaN value depends on FPCR.AH (specifically the sign bit is different) Add a field to float_status to specify the default NaN value; fall back to the old ifdef behaviour if these are not set. The default NaN value is specified by setting a uint8_t to a pattern corresponding to the sign and upper fraction parts of the NaN; the lower bits of the fraction are set from bit 0 of the pattern. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-35-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++++++ include/fpu/softfloat-types.h | 10 ++++++ fpu/softfloat-specialize.c.inc | 55 ++++++++++++++++++++------------- 3 files changed, 54 insertions(+), 22 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, status->float_infzeronan_rule = rule; } +static inline void set_float_default_nan_pattern(uint8_t dnan_pattern, + float_status *status) +{ + status->default_nan_pattern = dnan_pattern; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status return status->float_infzeronan_rule; } +static inline uint8_t get_float_default_nan_pattern(float_status *status) +{ + return status->default_nan_pattern; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { /* should denormalised inputs go to zero and set the input_denormal flag? */ bool flush_inputs_to_zero; bool default_nan_mode; + /* + * The pattern to use for the default NaN. Here the high bit specifies + * the default NaN's sign bit, and bits 6..0 specify the high bits of the + * fractional part. The low bits of the fractional part are copies of bit 0. + * The exponent of the default NaN is (as for any NaN) always all 1s. + * Note that a value of 0 here is not a valid NaN. The target must set + * this to the correct non-zero value, or we will assert when trying to + * create a default NaN. + */ + uint8_t default_nan_pattern; /* * The flags below are not used on all specializations and may * constant fold away (see snan_bit_is_one()/no_signalling_nans() in diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) { bool sign = 0; uint64_t frac; + uint8_t dnan_pattern = status->default_nan_pattern; + if (dnan_pattern == 0) { #if defined(TARGET_SPARC) || defined(TARGET_M68K) - /* !snan_bit_is_one, set all bits */ - frac = (1ULL << DECOMPOSED_BINARY_POINT) - 1; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ + /* Sign bit clear, all frac bits set */ + dnan_pattern = 0b01111111; +#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ || defined(TARGET_MICROBLAZE) - /* !snan_bit_is_one, set sign and msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - sign = 1; + /* Sign bit set, most significant frac bit set */ + dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) - /* snan_bit_is_one, set msb-1. */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 2); + /* Sign bit clear, msb-1 frac bit set */ + dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) - sign = 1; - frac = ~0ULL; + /* Sign bit set, all frac bits set. */ + dnan_pattern = 0b11111111; #else - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* set all bits other than msb */ - frac = (1ULL << (DECOMPOSED_BINARY_POINT - 1)) - 1; - } else { - /* set msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - } + /* + * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, + * S390, SH4, TriCore, and Xtensa. Our other supported targets + * do not have floating-point. + */ + if (snan_bit_is_one(status)) { + /* sign bit clear, set all frac bits other than msb */ + dnan_pattern = 0b00111111; + } else { + /* sign bit clear, set frac msb */ + dnan_pattern = 0b01000000; + } #endif + } + assert(dnan_pattern != 0); + + sign = dnan_pattern >> 7; + /* + * Place default_nan_pattern [6:0] into bits [62:56], + * and replecate bit [0] down into [55:0] + */ + frac = deposit64(0, DECOMPOSED_BINARY_POINT - 7, 7, dnan_pattern); + frac = deposit64(frac, 0, DECOMPOSED_BINARY_POINT - 7, -(dnan_pattern & 1)); *p = (FloatParts64) { .cls = float_class_qnan, -- 2.34.1 Set the default NaN pattern explicitly for the tests/fp code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-36-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 1 + 3 files changed, 3 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); + set_float_default_nan_pattern(0b01000000, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test-log2.c b/tests/fp/fp-test-log2.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test-log2.c +++ b/tests/fp/fp-test-log2.c @@ -XXX,XX +XXX,XX @@ int main(int ac, char **av) int i; set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_rounding_mode(float_round_nearest_even, &qsf); test.d = 0.0; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-37-peter.maydell@linaro.org --- target/microblaze/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj, ResetType type) * this architecture. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) /* start in user mode with interrupts enabled. */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ - || defined(TARGET_MICROBLAZE) +#elif defined(TARGET_I386) || defined(TARGET_X86_64) /* Sign bit set, most significant frac bit set */ dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-38-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 4 ++++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); + set_float_default_nan_pattern(0b11000000, &env->mmx_status); + set_float_default_nan_pattern(0b11000000, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) - /* Sign bit set, most significant frac bit set */ - dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) /* Sign bit clear, msb-1 frac bit set */ dnan_pattern = 0b00100000; -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-39-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN: sign bit clear, msb-1 frac bit set */ + set_float_default_nan_pattern(0b00100000, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_HPPA) - /* Sign bit clear, msb-1 frac bit set */ - dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; -- 2.34.1 Set the default NaN pattern explicitly for the alpha target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-40-peter.maydell@linaro.org --- target/alpha/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/alpha/cpu.c b/target/alpha/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/alpha/cpu.c +++ b/target/alpha/cpu.c @@ -XXX,XX +XXX,XX @@ static void alpha_cpu_initfn(Object *obj) * operand in Fa. That is float_2nan_prop_ba. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) env->flags = ENV_FLAG_PS_USER | ENV_FLAG_FEN; cpu_alpha_store_fpcr(env, (uint64_t)(FPCR_INVD | FPCR_DZED | FPCR_OVFD -- 2.34.1 Set the default NaN pattern explicitly for the arm target. This includes setting it for the old linux-user nwfpe emulation. For nwfpe, our default doesn't match the real kernel, but we avoid making a behaviour change in this commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-41-peter.maydell@linaro.org --- linux-user/arm/nwfpe/fpa11.c | 5 +++++ target/arm/cpu.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/linux-user/arm/nwfpe/fpa11.c b/linux-user/arm/nwfpe/fpa11.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/nwfpe/fpa11.c +++ b/linux-user/arm/nwfpe/fpa11.c @@ -XXX,XX +XXX,XX @@ void resetFPA11(void) * this late date. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &fpa11->fp_status); + /* + * Use the same default NaN value as Arm VFP. This doesn't match + * the Linux kernel's nwfpe emulation, which uses an all-1s value. + */ + set_float_default_nan_pattern(0b01000000, &fpa11->fp_status); } void SetRoundingMode(const unsigned int opcode) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling + * * Default NaN has sign bit clear, msb frac bit set */ static void arm_set_default_fp_behaviours(float_status *s) { @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); + set_float_default_nan_pattern(0b01000000, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) -- 2.34.1 Set the default NaN pattern explicitly for loongarch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-42-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) -- 2.34.1 Set the default NaN pattern explicitly for m68k. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-43-peter.maydell@linaro.org --- target/m68k/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + /* Default NaN: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); nan = floatx80_default_nan(&env->fp_status); for (i = 0; i < 8; i++) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) || defined(TARGET_M68K) +#if defined(TARGET_SPARC) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; #elif defined(TARGET_HEXAGON) -- 2.34.1 Set the default NaN pattern explicitly for MIPS. Note that this is our only target which currently changes the default NaN at runtime (which it was previously doing indirectly when it changed the snan_bit_is_one setting). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-44-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 7 +++++++ target/mips/msa.c | 3 +++ 2 files changed, 10 insertions(+) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + /* + * With nan2008, the default NaN value has the sign bit clear and the + * frac msb set; with the older mode, the sign bit is clear, and all + * frac bits except the msb are set. + */ + set_float_default_nan_pattern(nan2008 ? 0b01000000 : 0b00111111, + &env->active_fpu.fp_status); } diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* Inf * 0 + NaN returns the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->active_tc.msa_fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, + &env->active_tc.msa_fp_status); } -- 2.34.1 Set the default NaN pattern explicitly for openrisc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-45-peter.maydell@linaro.org --- target/openrisc/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &cpu->env.fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &cpu->env.fp_status); #ifndef CONFIG_USER_ONLY cpu->env.picmr = 0x00000000; -- 2.34.1 Set the default NaN pattern explicitly for ppc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-46-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); + /* Default NaN: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); + set_float_default_nan_pattern(0b01000000, &env->vec_status); + for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; -- 2.34.1 Set the default NaN pattern explicitly for sh4. Note that sh4 is one of the only three targets (the others being HPPA and sometimes MIPS) that has snan_bit_is_one set. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-47-peter.maydell@linaro.org --- target/sh4/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static void superh_cpu_reset_hold(Object *obj, ResetType type) set_flush_to_zero(1, &env->fp_status); #endif set_default_nan_mode(1, &env->fp_status); + /* sign bit clear, set all frac bits other than msb */ + set_float_default_nan_pattern(0b00111111, &env->fp_status); } static void superh_cpu_disas_set_info(CPUState *cpu, disassemble_info *info) -- 2.34.1 Set the default NaN pattern explicitly for rx. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-48-peter.maydell@linaro.org --- target/rx/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj, ResetType type) * then prefer dest over source", which is float_2nan_prop_s_ab. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } static ObjectClass *rx_cpu_class_by_name(const char *cpu_model) -- 2.34.1 Set the default NaN pattern explicitly for s390x. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-49-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; -- 2.34.1 Set the default NaN pattern explicitly for SPARC, and remove the ifdef from parts64_default_nan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-50-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 +---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN value: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) - /* Sign bit clear, all frac bits set */ - dnan_pattern = 0b01111111; -#elif defined(TARGET_HEXAGON) +#if defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; #else -- 2.34.1 Set the default NaN pattern explicitly for xtensa. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-51-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } -- 2.34.1 Set the default NaN pattern explicitly for hexagon. Remove the ifdef from parts64_default_nan(); the only remaining unconverted targets all use the default case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-52-peter.maydell@linaro.org --- target/hexagon/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 ----- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_cpu_reset_hold(Object *obj, ResetType type) set_default_nan_mode(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); + /* Default NaN value: sign bit set, all frac bits set */ + set_float_default_nan_pattern(0b11111111, &env->fp_status); } static void hexagon_cpu_disas_set_info(CPUState *s, disassemble_info *info) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_HEXAGON) - /* Sign bit set, all frac bits set. */ - dnan_pattern = 0b11111111; -#else /* * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, * S390, SH4, TriCore, and Xtensa. Our other supported targets @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) /* sign bit clear, set frac msb */ dnan_pattern = 0b01000000; } -#endif } assert(dnan_pattern != 0); -- 2.34.1 Set the default NaN pattern explicitly for riscv. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-53-peter.maydell@linaro.org --- target/riscv/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) cs->exception_index = RISCV_EXCP_NONE; env->load_res = -1; set_default_nan_mode(1, &env->fp_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); env->vill = true; #ifndef CONFIG_USER_ONLY -- 2.34.1 Set the default NaN pattern explicitly for tricore. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-54-peter.maydell@linaro.org --- target/tricore/helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/tricore/helper.c b/target/tricore/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/helper.c +++ b/target/tricore/helper.c @@ -XXX,XX +XXX,XX @@ void fpu_set_state(CPUTriCoreState *env) set_flush_to_zero(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); set_default_nan_mode(1, &env->fp_status); + /* Default NaN pattern: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } uint32_t psw_read(CPUTriCoreState *env) -- 2.34.1 Now that all our targets have bene converted to explicitly specify their pattern for the default NaN value we can remove the remaining fallback code in parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-55-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint64_t frac; uint8_t dnan_pattern = status->default_nan_pattern; - if (dnan_pattern == 0) { - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* sign bit clear, set all frac bits other than msb */ - dnan_pattern = 0b00111111; - } else { - /* sign bit clear, set frac msb */ - dnan_pattern = 0b01000000; - } - } assert(dnan_pattern != 0); sign = dnan_pattern >> 7; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaNMulAdd into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-3-richard.henderson@linaro.org [PMM: keep comment from old code in new location] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 41 +++++++++++++++++++++++++- fpu/softfloat-specialize.c.inc | 54 ---------------------------------- 2 files changed, 40 insertions(+), 55 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } if (s->default_nan_mode) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ which = 3; + } else if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the + * default NaN here, and some return the input NaN. + */ + switch (s->float_infzeronan_rule) { + case float_infzeronan_dnan_never: + which = 2; + break; + case float_infzeronan_dnan_always: + which = 3; + break; + case float_infzeronan_dnan_if_qnan: + which = is_qnan(c->cls) ? 3 : 2; + break; + default: + g_assert_not_reached(); + } } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); + FloatClass cls[3] = { a->cls, b->cls, c->cls }; + Float3NaNPropRule rule = s->float_3nan_prop_rule; + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a three-input operation. -| For the moment we assume that no CPU needs the 'larger significand' -| information. -| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN -*----------------------------------------------------------------------------*/ -static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, bool have_snan, float_status *status) -{ - FloatClass cls[3] = { a_cls, b_cls, c_cls }; - Float3NaNPropRule rule = status->float_3nan_prop_rule; - int which; - - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify. - */ - assert(!status->default_nan_mode); - - if (infzero) { - /* - * Inf * 0 + NaN -- some implementations return the default NaN here, - * and some return the input NaN. - */ - switch (status->float_infzeronan_rule) { - case float_infzeronan_dnan_never: - return 2; - case float_infzeronan_dnan_always: - return 3; - case float_infzeronan_dnan_if_qnan: - return is_qnan(c_cls) ? 3 : 2; - default: - g_assert_not_reached(); - } - } - - assert(rule != float_3nan_prop_none); - if (have_snan && (rule & R_3NAN_SNAN_MASK)) { - /* We have at least one SNaN input and should prefer it */ - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); - } else { - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); - } - return which; -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remove "3" as a special case for which and simply branch to return the desired value. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, * But if we're not in default-NaN mode then the target must * specify. */ - which = 3; + goto default_nan; } else if (infzero) { /* * Inf * 0 + NaN -- some implementations return the @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, */ switch (s->float_infzeronan_rule) { case float_infzeronan_dnan_never: - which = 2; break; case float_infzeronan_dnan_always: - which = 3; - break; + goto default_nan; case float_infzeronan_dnan_if_qnan: - which = is_qnan(c->cls) ? 3 : 2; + if (is_qnan(c->cls)) { + goto default_nan; + } break; default: g_assert_not_reached(); } + which = 2; } else { FloatClass cls[3] = { a->cls, b->cls, c->cls }; Float3NaNPropRule rule = s->float_3nan_prop_rule; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } } - if (which == 3) { - parts_default_nan(a, s); - return a; - } - switch (which) { case 0: break; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, parts_silence_nan(a, s); } return a; + + default_nan: + parts_default_nan(a, s); + return a; } /* -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Assign the pointer return value to 'a' directly, rather than going through an intermediary index. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, FloatPartsN *c, float_status *s, int ab_mask, int abc_mask) { - int which; bool infzero = (ab_mask == float_cmask_infzero); bool have_snan = (abc_mask & float_cmask_snan); + FloatPartsN *ret; if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, default: g_assert_not_reached(); } - which = 2; + ret = c; } else { - FloatClass cls[3] = { a->cls, b->cls, c->cls }; + FloatPartsN *val[3] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); + } while (!is_snan(ret->cls)); } else { do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); + } while (!is_nan(ret->cls)); } } - switch (which) { - case 0: - break; - case 1: - a = b; - break; - case 2: - a = c; - break; - default: - g_assert_not_reached(); + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; default_nan: parts_default_nan(a, s); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> While all indices into val[] should be in [0-2], the mask applied is two bits. To help static analysis see there is no possibility of read beyond the end of the array, pad the array to 4 entries, with the final being (implicitly) NULL. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } ret = c; } else { - FloatPartsN *val[3] = { a, b, c }; + FloatPartsN *val[R_3NAN_1ST_MASK + 1] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This function is part of the public interface and is not "specialized" to any target in any way. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 52 ++++++++++++++++++++++++++++++++++ fpu/softfloat-specialize.c.inc | 52 ---------------------------------- 2 files changed, 52 insertions(+), 52 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, *zExpPtr = 1 - shiftCount; } +/*---------------------------------------------------------------------------- +| Takes two extended double-precision floating-point values `a' and `b', one +| of which is a NaN, and returns the appropriate NaN result. If either `a' or +| `b' is a signaling NaN, the invalid exception is raised. +*----------------------------------------------------------------------------*/ + +floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) +{ + bool aIsLargerSignificand; + FloatClass a_cls, b_cls; + + /* This is not complete, but is good enough for pickNaN. */ + a_cls = (!floatx80_is_any_nan(a) + ? float_class_normal + : floatx80_is_signaling_nan(a, status) + ? float_class_snan + : float_class_qnan); + b_cls = (!floatx80_is_any_nan(b) + ? float_class_normal + : floatx80_is_signaling_nan(b, status) + ? float_class_snan + : float_class_qnan); + + if (is_snan(a_cls) || is_snan(b_cls)) { + float_raise(float_flag_invalid, status); + } + + if (status->default_nan_mode) { + return floatx80_default_nan(status); + } + + if (a.low < b.low) { + aIsLargerSignificand = 0; + } else if (b.low < a.low) { + aIsLargerSignificand = 1; + } else { + aIsLargerSignificand = (a.high < b.high) ? 1 : 0; + } + + if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { + if (is_snan(b_cls)) { + return floatx80_silence_nan(b, status); + } + return b; + } else { + if (is_snan(a_cls)) { + return floatx80_silence_nan(a, status); + } + return a; + } +} + /*---------------------------------------------------------------------------- | Takes an abstract floating-point value having sign `zSign', exponent `zExp', | and extended significand formed by the concatenation of `zSig0' and `zSig1', diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ floatx80 floatx80_silence_nan(floatx80 a, float_status *status) return a; } -/*---------------------------------------------------------------------------- -| Takes two extended double-precision floating-point values `a' and `b', one -| of which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) -{ - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; - - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { - return floatx80_default_nan(status); - } - - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the quadruple-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Unpacking and repacking the parts may be slightly more work than we did before, but we get to reuse more code. For a code path handling exceptional values, this is an improvement. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241203203949.483774-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 43 +++++-------------------------------------- 1 file changed, 5 insertions(+), 38 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) { - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; + FloatParts128 pa, pb, *pr; - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { + if (!floatx80_unpack_canonical(&pa, a, status) || + !floatx80_unpack_canonical(&pb, b, status)) { return floatx80_default_nan(status); } - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } + pr = parts_pick_nan(&pa, &pb, status); + return floatx80_round_pack_canonical(pr, status); } /*---------------------------------------------------------------------------- -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaN into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 82 +++++++++++++++++++++++++---- fpu/softfloat-specialize.c.inc | 96 ---------------------------------- 2 files changed, 73 insertions(+), 105 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + int cmp, which; + if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } if (s->default_nan_mode) { parts_default_nan(a, s); - } else { - int cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } + return a; + } - if (pickNaN(a->cls, b->cls, cmp > 0, s)) { - a = b; - } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + + switch (s->float_2nan_prop_rule) { + case float_2nan_prop_s_ab: if (is_snan(a->cls)) { - parts_silence_nan(a, s); + which = 0; + } else if (is_snan(b->cls)) { + which = 1; + } else if (is_qnan(a->cls)) { + which = 0; + } else { + which = 1; } + break; + case float_2nan_prop_s_ba: + if (is_snan(b->cls)) { + which = 1; + } else if (is_snan(a->cls)) { + which = 0; + } else if (is_qnan(b->cls)) { + which = 1; + } else { + which = 0; + } + break; + case float_2nan_prop_ab: + which = is_nan(a->cls) ? 0 : 1; + break; + case float_2nan_prop_ba: + which = is_nan(b->cls) ? 1 : 0; + break; + case float_2nan_prop_x87: + /* + * This implements x87 NaN propagation rules: + * SNaN + QNaN => return the QNaN + * two SNaNs => return the one with the larger significand, silenced + * two QNaNs => return the one with the larger significand + * SNaN and a non-NaN => return the SNaN, silenced + * QNaN and a non-NaN => return the QNaN + * + * If we get down to comparing significands and they are the same, + * return the NaN with the positive sign bit (if any). + */ + if (is_snan(a->cls)) { + if (is_snan(b->cls)) { + which = cmp > 0 ? 0 : 1; + } else { + which = is_qnan(b->cls) ? 1 : 0; + } + } else if (is_qnan(a->cls)) { + if (is_snan(b->cls) || !is_qnan(b->cls)) { + which = 0; + } else { + which = cmp > 0 ? 0 : 1; + } + } else { + which = 1; + } + break; + default: + g_assert_not_reached(); + } + + if (which) { + a = b; + } + if (is_snan(a->cls)) { + parts_silence_nan(a, s); } return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ bool float32_is_signaling_nan(float32 a_, float_status *status) } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a two-input operation. -| IEEE754 doesn't specify all the details of this, so the -| algorithm is target-specific. -| The routine is passed various bits of information about the -| two NaNs and should return 0 to select NaN a and 1 for NaN b. -| Note that signalling NaNs are always squashed to quiet NaNs -| by the caller, by calling floatXX_silence_nan() before -| returning them. -| -| aIsLargerSignificand is only valid if both a and b are NaNs -| of some kind, and is true if a has the larger significand, -| or if both a and b have the same significand but a is -| positive but b is negative. It is only needed for the x87 -| tie-break rule. -*----------------------------------------------------------------------------*/ - -static int pickNaN(FloatClass a_cls, FloatClass b_cls, - bool aIsLargerSignificand, float_status *status) -{ - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify via set_float_2nan_prop_rule(). - */ - assert(!status->default_nan_mode); - - switch (status->float_2nan_prop_rule) { - case float_2nan_prop_s_ab: - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_s_ba: - if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_ab: - if (is_nan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_ba: - if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_x87: - /* - * This implements x87 NaN propagation rules: - * SNaN + QNaN => return the QNaN - * two SNaNs => return the one with the larger significand, silenced - * two QNaNs => return the one with the larger significand - * SNaN and a non-NaN => return the SNaN, silenced - * QNaN and a non-NaN => return the QNaN - * - * If we get down to comparing significands and they are the same, - * return the NaN with the positive sign bit (if any). - */ - if (is_snan(a_cls)) { - if (is_snan(b_cls)) { - return aIsLargerSignificand ? 0 : 1; - } - return is_qnan(b_cls) ? 1 : 0; - } else if (is_qnan(a_cls)) { - if (is_snan(b_cls) || !is_qnan(b_cls)) { - return 0; - } else { - return aIsLargerSignificand ? 0 : 1; - } - } else { - return 1; - } - default: - g_assert_not_reached(); - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remember if there was an SNaN, and use that to simplify float_2nan_prop_s_{ab,ba} to only the snan component. Then, fall through to the corresponding float_2nan_prop_{ab,ba} case to handle any remaining nans, which must be quiet. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + bool have_snan = false; int cmp, which; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); + have_snan = true; } if (s->default_nan_mode) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: - if (is_snan(a->cls)) { - which = 0; - } else if (is_snan(b->cls)) { - which = 1; - } else if (is_qnan(a->cls)) { - which = 0; - } else { - which = 1; + if (have_snan) { + which = is_snan(a->cls) ? 0 : 1; + break; } - break; - case float_2nan_prop_s_ba: - if (is_snan(b->cls)) { - which = 1; - } else if (is_snan(a->cls)) { - which = 0; - } else if (is_qnan(b->cls)) { - which = 1; - } else { - which = 0; - } - break; + /* fall through */ case float_2nan_prop_ab: which = is_nan(a->cls) ? 0 : 1; break; + case float_2nan_prop_s_ba: + if (have_snan) { + which = is_snan(b->cls) ? 1 : 0; + break; + } + /* fall through */ case float_2nan_prop_ba: which = is_nan(b->cls) ? 1 : 0; break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Move the fractional comparison to the end of the float_2nan_prop_x87 case. This is not required for any other 2nan propagation rule. Reorganize the x87 case itself to break out of the switch when the fractional comparison is not required. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, return a; } - cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } - switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, * return the NaN with the positive sign bit (if any). */ if (is_snan(a->cls)) { - if (is_snan(b->cls)) { - which = cmp > 0 ? 0 : 1; - } else { + if (!is_snan(b->cls)) { which = is_qnan(b->cls) ? 1 : 0; + break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { which = 0; - } else { - which = cmp > 0 ? 0 : 1; + break; } } else { which = 1; + break; } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + which = cmp > 0 ? 0 : 1; break; default: g_assert_not_reached(); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Replace the "index" selecting between A and B with a result variable of the proper type. This improves clarity within the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { bool have_snan = false; - int cmp, which; + FloatPartsN *ret; + int cmp; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { - which = is_snan(a->cls) ? 0 : 1; + ret = is_snan(a->cls) ? a : b; break; } /* fall through */ case float_2nan_prop_ab: - which = is_nan(a->cls) ? 0 : 1; + ret = is_nan(a->cls) ? a : b; break; case float_2nan_prop_s_ba: if (have_snan) { - which = is_snan(b->cls) ? 1 : 0; + ret = is_snan(b->cls) ? b : a; break; } /* fall through */ case float_2nan_prop_ba: - which = is_nan(b->cls) ? 1 : 0; + ret = is_nan(b->cls) ? b : a; break; case float_2nan_prop_x87: /* @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, */ if (is_snan(a->cls)) { if (!is_snan(b->cls)) { - which = is_qnan(b->cls) ? 1 : 0; + ret = is_qnan(b->cls) ? b : a; break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { - which = 0; + ret = a; break; } } else { - which = 1; + ret = b; break; } cmp = frac_cmp(a, b); if (cmp == 0) { cmp = a->sign < b->sign; } - which = cmp > 0 ? 0 : 1; + ret = cmp > 0 ? a : b; break; default: g_assert_not_reached(); } - if (which) { - a = b; + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; } static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> I'm migrating to Qualcomm's new open source email infrastructure, so update my email address, and update the mailmap to match. Signed-off-by: Leif Lindholm <leif.lindholm@oss.qualcomm.com> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241205114047.1125842-1-leif.lindholm@oss.qualcomm.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- .mailmap | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <quic_llindhol@quicinc.com> +R: Leif Lindholm <leif.lindholm@oss.qualcomm.com> R: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> L: qemu-arm@nongnu.org S: Maintained diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> Juan Quintela <quintela@trasno.org> <quintela@redhat.com> -Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> -Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <quic_llindhol@quicinc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif.lindholm@linaro.org> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif@nuviainc.com> Luc Michel <luc@lmichel.fr> <luc.michel@git.antfield.fr> Luc Michel <luc@lmichel.fr> <luc.michel@greensocs.com> Luc Michel <luc@lmichel.fr> <lmichel@kalray.eu> -- 2.34.1 From: Vikram Garhwal <vikram.garhwal@bytedance.com> Previously, maintainer role was paused due to inactive email id. Commit id: c009d715721861984c4987bcc78b7ee183e86d75. Signed-off-by: Vikram Garhwal <vikram.garhwal@bytedance.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20241204184205.12952-1-vikram.garhwal@bytedance.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: tests/qtest/fuzz-sb16-test.c Xilinx CAN M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained F: hw/net/can/xlnx-* F: include/hw/net/xlnx-* @@ -XXX,XX +XXX,XX @@ F: include/hw/rx/ CAN bus subsystem and hardware M: Pavel Pisa <pisa@cmp.felk.cvut.cz> M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained W: https://canbus.pages.fel.cvut.cz/ F: net/can/* -- 2.34.1