The following changes since commit 61fee7f45955cd0bf9b79be9fa9c7ebabb5e6a85: Merge remote-tracking branch 'remotes/philmd-gitlab/tags/acceptance-testing-20200622' into staging (2020-06-22 20:50:10 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200623 for you to fetch changes up to 539533b85fbd269f777bed931de8ccae1dd837e9: arm/virt: Add memory hot remove support (2020-06-23 11:39:48 +0100) ---------------------------------------------------------------- target-arm queue: * util/oslib-posix : qemu_init_exec_dir implementation for Mac * target/arm: Last parts of neon decodetree conversion * hw/arm/virt: Add 5.0 HW compat props * hw/watchdog/cmsdk-apb-watchdog: Add trace event for lock status * mps2: Add CMSDK APB watchdog, FPGAIO block, S2I devices and I2C devices * mps2: Add some unimplemented-device stubs for audio and GPIO * mps2-tz: Use the ARM SBCon two-wire serial bus interface * target/arm: Check supported KVM features globally (not per vCPU) * tests/qtest/arm-cpu-features: Add feature setting tests * arm/virt: Add memory hot remove support ---------------------------------------------------------------- Andrew Jones (2): hw/arm/virt: Add 5.0 HW compat props tests/qtest/arm-cpu-features: Add feature setting tests David CARLIER (1): util/oslib-posix : qemu_init_exec_dir implementation for Mac Peter Maydell (23): target/arm: Convert Neon 2-reg-misc VREV64 to decodetree target/arm: Convert Neon 2-reg-misc pairwise ops to decodetree target/arm: Convert VZIP, VUZP to decodetree target/arm: Convert Neon narrowing moves to decodetree target/arm: Convert Neon 2-reg-misc VSHLL to decodetree target/arm: Convert Neon VCVT f16/f32 insns to decodetree target/arm: Convert vectorised 2-reg-misc Neon ops to decodetree target/arm: Convert Neon 2-reg-misc crypto operations to decodetree target/arm: Rename NeonGenOneOpFn to NeonGenOne64OpFn target/arm: Fix capitalization in NeonGenTwo{Single, Double}OPFn typedefs target/arm: Make gen_swap_half() take separate src and dest target/arm: Convert Neon 2-reg-misc VREV32 and VREV16 to decodetree target/arm: Convert remaining simple 2-reg-misc Neon ops target/arm: Convert Neon VQABS, VQNEG to decodetree target/arm: Convert simple fp Neon 2-reg-misc insns target/arm: Convert Neon 2-reg-misc fp-compare-with-zero insns to decodetree target/arm: Convert Neon 2-reg-misc VRINT insns to decodetree target/arm: Convert Neon 2-reg-misc VCVT insns to decodetree target/arm: Convert Neon VSWP to decodetree target/arm: Convert Neon VTRN to decodetree target/arm: Move some functions used only in translate-neon.inc.c to that file target/arm: Remove unnecessary gen_io_end() calls target/arm: Remove dead code relating to SABA and UABA Philippe Mathieu-Daudé (15): hw/watchdog/cmsdk-apb-watchdog: Add trace event for lock status hw/i2c/versatile_i2c: Add definitions for register addresses hw/i2c/versatile_i2c: Add SCL/SDA definitions hw/i2c: Add header for ARM SBCon two-wire serial bus interface hw/arm: Use TYPE_VERSATILE_I2C instead of hardcoded string hw/arm/mps2: Document CMSDK/FPGA APB subsystem sections hw/arm/mps2: Rename CMSDK AHB peripheral region hw/arm/mps2: Add CMSDK APB watchdog device hw/arm/mps2: Add CMSDK AHB GPIO peripherals as unimplemented devices hw/arm/mps2: Map the FPGA I/O block hw/arm/mps2: Add SPI devices hw/arm/mps2: Add I2C devices hw/arm/mps2: Add audio I2S interface as unimplemented device hw/arm/mps2-tz: Use the ARM SBCon two-wire serial bus interface target/arm: Check supported KVM features globally (not per vCPU) Shameer Kolothum (1): arm/virt: Add memory hot remove support include/hw/i2c/arm_sbcon_i2c.h | 35 ++ target/arm/cpu.h | 2 +- target/arm/kvm_arm.h | 21 +- target/arm/translate.h | 8 +- target/arm/neon-dp.decode | 106 ++++ hw/acpi/generic_event_device.c | 29 + hw/arm/mps2-tz.c | 23 +- hw/arm/mps2.c | 65 ++- hw/arm/realview.c | 3 +- hw/arm/versatilepb.c | 3 +- hw/arm/vexpress.c | 3 +- hw/arm/virt.c | 63 +- hw/i2c/versatile_i2c.c | 38 +- hw/watchdog/cmsdk-apb-watchdog.c | 1 + target/arm/cpu.c | 2 +- target/arm/cpu64.c | 10 +- target/arm/kvm.c | 4 +- target/arm/kvm64.c | 14 +- target/arm/translate-a64.c | 20 +- target/arm/translate-neon.inc.c | 1191 +++++++++++++++++++++++++++++++++++++- target/arm/translate-vfp.inc.c | 7 +- target/arm/translate.c | 1064 +--------------------------------- tests/qtest/arm-cpu-features.c | 38 +- util/oslib-posix.c | 15 + MAINTAINERS | 1 + hw/arm/Kconfig | 8 +- hw/watchdog/trace-events | 1 + 27 files changed, 1624 insertions(+), 1151 deletions(-) create mode 100644 include/hw/i2c/arm_sbcon_i2c.h From: Andrew Jones <drjones@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20200616140803.25515-1-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 1) static void virt_machine_5_0_options(MachineClass *mc) { virt_machine_5_1_options(mc); + compat_props_add(mc->compat_props, hw_compat_5_0, hw_compat_5_0_len); } DEFINE_VIRT_MACHINE(5, 0) -- 2.20.1 From: David CARLIER <devnexen@gmail.com> From 3025a0ce3fdf7d3559fc35a52c659f635f5c750c Mon Sep 17 00:00:00 2001 From: David Carlier <devnexen@gmail.com> Date: Tue, 26 May 2020 21:35:27 +0100 Subject: [PATCH] util/oslib-posix : qemu_init_exec_dir implementation for Mac Using dyld API to get the full path of the current process. Signed-off-by: David Carlier <devnexen@gmail.com> Message-id: CA+XhMqxwC10XHVs4Z-JfE0-WLAU3ztDuU9QKVi31mjr59HWCxg@mail.gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- util/oslib-posix.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/util/oslib-posix.c b/util/oslib-posix.c index XXXXXXX..XXXXXXX 100644 --- a/util/oslib-posix.c +++ b/util/oslib-posix.c @@ -XXX,XX +XXX,XX @@ #include <lwp.h> #endif +#ifdef __APPLE__ +#include <mach-o/dyld.h> +#endif + #include "qemu/mmap-alloc.h" #ifdef CONFIG_DEBUG_STACK_USAGE @@ -XXX,XX +XXX,XX @@ void qemu_init_exec_dir(const char *argv0) p = buf; } } +#elif defined(__APPLE__) + { + char fpath[PATH_MAX]; + uint32_t len = sizeof(fpath); + if (_NSGetExecutablePath(fpath, &len) == 0) { + p = realpath(fpath, buf); + if (!p) { + return; + } + } + } #endif /* If we don't have any way of figuring out the actual executable location then try argv[0]. */ -- 2.20.1 Convert the Neon VREV64 insn from the 2-reg-misc grouping to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-2-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 12 ++++++++ target/arm/translate-neon.inc.c | 50 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 24 ++-------------- 3 files changed, 64 insertions(+), 22 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm vm=%vm_dp vd=%vd_dp size=1 VDUP_scalar 1111 001 1 1 . 11 index:1 100 .... 11 000 q:1 . 0 .... \ vm=%vm_dp vd=%vd_dp size=2 + + ################################################################## + # 2-reg-misc grouping: + # 1111 001 11 D 11 size:2 opc1:2 Vd:4 0 opc2:4 q:1 M 0 Vm:4 + ################################################################## + + &2misc vd vm q size + + @2misc .... ... .. . .. size:2 .. .... . .... q:1 . . .... \ + &2misc vm=%vm_dp vd=%vd_dp + + VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP_scalar(DisasContext *s, arg_VDUP_scalar *a) a->q ? 16 : 8, a->q ? 16 : 8); return true; } + +static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) +{ + int pass, half; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (a->size == 3) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + for (pass = 0; pass < (a->q ? 2 : 1); pass++) { + TCGv_i32 tmp[2]; + + for (half = 0; half < 2; half++) { + tmp[half] = neon_load_reg(a->vm, pass * 2 + half); + switch (a->size) { + case 0: + tcg_gen_bswap32_i32(tmp[half], tmp[half]); + break; + case 1: + gen_swap_half(tmp[half]); + break; + case 2: + break; + default: + g_assert_not_reached(); + } + } + neon_store_reg(a->vd, pass * 2, tmp[1]); + neon_store_reg(a->vd, pass * 2 + 1, tmp[0]); + } + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } switch (op) { case NEON_2RM_VREV64: - for (pass = 0; pass < (q ? 2 : 1); pass++) { - tmp = neon_load_reg(rm, pass * 2); - tmp2 = neon_load_reg(rm, pass * 2 + 1); - switch (size) { - case 0: tcg_gen_bswap32_i32(tmp, tmp); break; - case 1: gen_swap_half(tmp); break; - case 2: /* no-op */ break; - default: abort(); - } - neon_store_reg(rd, pass * 2 + 1, tmp); - if (size == 2) { - neon_store_reg(rd, pass * 2, tmp2); - } else { - switch (size) { - case 0: tcg_gen_bswap32_i32(tmp2, tmp2); break; - case 1: gen_swap_half(tmp2); break; - default: abort(); - } - neon_store_reg(rd, pass * 2, tmp2); - } - } - break; + /* handled by decodetree */ + return 1; case NEON_2RM_VPADDL: case NEON_2RM_VPADDL_U: case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: for (pass = 0; pass < q + 1; pass++) { -- 2.20.1 Convert the pairwise ops VPADDL and VPADAL in the 2-reg-misc grouping to decodetree. At this point we can get rid of the weird CPU_V001 #define that was used to avoid having to explicitly list all the arguments being passed to some TCG gen/helper functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-3-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 6 ++ target/arm/translate-neon.inc.c | 149 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 35 +------- 3 files changed, 157 insertions(+), 33 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm &2misc vm=%vm_dp vd=%vd_dp VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc + + VPADDL_S 1111 001 11 . 11 .. 00 .... 0 0100 . . 0 .... @2misc + VPADDL_U 1111 001 11 . 11 .. 00 .... 0 0101 . . 0 .... @2misc + + VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc + VPADAL_U 1111 001 11 . 11 .. 00 .... 0 1101 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) } return true; } + +static bool do_2misc_pairwise(DisasContext *s, arg_2misc *a, + NeonGenWidenFn *widenfn, + NeonGenTwo64OpFn *opfn, + NeonGenTwo64OpFn *accfn) +{ + /* + * Pairwise long operations: widen both halves of the pair, + * combine the pairs with the opfn, and then possibly accumulate + * into the destination with the accfn. + */ + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!widenfn) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + for (pass = 0; pass < a->q + 1; pass++) { + TCGv_i32 tmp; + TCGv_i64 rm0_64, rm1_64, rd_64; + + rm0_64 = tcg_temp_new_i64(); + rm1_64 = tcg_temp_new_i64(); + rd_64 = tcg_temp_new_i64(); + tmp = neon_load_reg(a->vm, pass * 2); + widenfn(rm0_64, tmp); + tcg_temp_free_i32(tmp); + tmp = neon_load_reg(a->vm, pass * 2 + 1); + widenfn(rm1_64, tmp); + tcg_temp_free_i32(tmp); + opfn(rd_64, rm0_64, rm1_64); + tcg_temp_free_i64(rm0_64); + tcg_temp_free_i64(rm1_64); + + if (accfn) { + TCGv_i64 tmp64 = tcg_temp_new_i64(); + neon_load_reg64(tmp64, a->vd + pass); + accfn(rd_64, tmp64, rd_64); + tcg_temp_free_i64(tmp64); + } + neon_store_reg64(rd_64, a->vd + pass); + tcg_temp_free_i64(rd_64); + } + return true; +} + +static bool trans_VPADDL_S(DisasContext *s, arg_2misc *a) +{ + static NeonGenWidenFn * const widenfn[] = { + gen_helper_neon_widen_s8, + gen_helper_neon_widen_s16, + tcg_gen_ext_i32_i64, + NULL, + }; + static NeonGenTwo64OpFn * const opfn[] = { + gen_helper_neon_paddl_u16, + gen_helper_neon_paddl_u32, + tcg_gen_add_i64, + NULL, + }; + + return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], NULL); +} + +static bool trans_VPADDL_U(DisasContext *s, arg_2misc *a) +{ + static NeonGenWidenFn * const widenfn[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + NULL, + }; + static NeonGenTwo64OpFn * const opfn[] = { + gen_helper_neon_paddl_u16, + gen_helper_neon_paddl_u32, + tcg_gen_add_i64, + NULL, + }; + + return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], NULL); +} + +static bool trans_VPADAL_S(DisasContext *s, arg_2misc *a) +{ + static NeonGenWidenFn * const widenfn[] = { + gen_helper_neon_widen_s8, + gen_helper_neon_widen_s16, + tcg_gen_ext_i32_i64, + NULL, + }; + static NeonGenTwo64OpFn * const opfn[] = { + gen_helper_neon_paddl_u16, + gen_helper_neon_paddl_u32, + tcg_gen_add_i64, + NULL, + }; + static NeonGenTwo64OpFn * const accfn[] = { + gen_helper_neon_addl_u16, + gen_helper_neon_addl_u32, + tcg_gen_add_i64, + NULL, + }; + + return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], + accfn[a->size]); +} + +static bool trans_VPADAL_U(DisasContext *s, arg_2misc *a) +{ + static NeonGenWidenFn * const widenfn[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + NULL, + }; + static NeonGenTwo64OpFn * const opfn[] = { + gen_helper_neon_paddl_u16, + gen_helper_neon_paddl_u32, + tcg_gen_add_i64, + NULL, + }; + static NeonGenTwo64OpFn * const accfn[] = { + gen_helper_neon_addl_u16, + gen_helper_neon_addl_u32, + tcg_gen_add_i64, + NULL, + }; + + return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], + accfn[a->size]); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc) gen_rfe(s, pc, load_cpu_field(spsr)); } -#define CPU_V001 cpu_V0, cpu_V0, cpu_V1 - static int gen_neon_unzip(int rd, int rm, int size, int q) { TCGv_ptr pd, pm; @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) tcg_temp_free_i32(src); } -static inline void gen_neon_addl(int size) -{ - switch (size) { - case 0: gen_helper_neon_addl_u16(CPU_V001); break; - case 1: gen_helper_neon_addl_u32(CPU_V001); break; - case 2: tcg_gen_add_i64(CPU_V001); break; - default: abort(); - } -} - static void gen_neon_narrow_op(int op, int u, int size, TCGv_i32 dest, TCGv_i64 src) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } switch (op) { case NEON_2RM_VREV64: - /* handled by decodetree */ - return 1; case NEON_2RM_VPADDL: case NEON_2RM_VPADDL_U: case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: - for (pass = 0; pass < q + 1; pass++) { - tmp = neon_load_reg(rm, pass * 2); - gen_neon_widen(cpu_V0, tmp, size, op & 1); - tmp = neon_load_reg(rm, pass * 2 + 1); - gen_neon_widen(cpu_V1, tmp, size, op & 1); - switch (size) { - case 0: gen_helper_neon_paddl_u16(CPU_V001); break; - case 1: gen_helper_neon_paddl_u32(CPU_V001); break; - case 2: tcg_gen_add_i64(CPU_V001); break; - default: abort(); - } - if (op >= NEON_2RM_VPADAL) { - /* Accumulate. */ - neon_load_reg64(cpu_V1, rd + pass); - gen_neon_addl(size); - } - neon_store_reg64(cpu_V0, rd + pass); - } - break; + /* handled by decodetree */ + return 1; case NEON_2RM_VTRN: if (size == 2) { int n; -- 2.20.1 Convert the Neon VZIP and VUZP insns in the 2-reg-misc group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-4-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 3 ++ target/arm/translate-neon.inc.c | 74 ++++++++++++++++++++++++++ target/arm/translate.c | 92 +-------------------------------- 3 files changed, 79 insertions(+), 90 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc VPADAL_U 1111 001 11 . 11 .. 00 .... 0 1101 . . 0 .... @2misc + + VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc + VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VPADAL_U(DisasContext *s, arg_2misc *a) return do_2misc_pairwise(s, a, widenfn[a->size], opfn[a->size], accfn[a->size]); } + +typedef void ZipFn(TCGv_ptr, TCGv_ptr); + +static bool do_zip_uzp(DisasContext *s, arg_2misc *a, + ZipFn *fn) +{ + TCGv_ptr pd, pm; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!fn) { + /* Bad size or size/q combination */ + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + pd = vfp_reg_ptr(true, a->vd); + pm = vfp_reg_ptr(true, a->vm); + fn(pd, pm); + tcg_temp_free_ptr(pd); + tcg_temp_free_ptr(pm); + return true; +} + +static bool trans_VUZP(DisasContext *s, arg_2misc *a) +{ + static ZipFn * const fn[2][4] = { + { + gen_helper_neon_unzip8, + gen_helper_neon_unzip16, + NULL, + NULL, + }, { + gen_helper_neon_qunzip8, + gen_helper_neon_qunzip16, + gen_helper_neon_qunzip32, + NULL, + } + }; + return do_zip_uzp(s, a, fn[a->q][a->size]); +} + +static bool trans_VZIP(DisasContext *s, arg_2misc *a) +{ + static ZipFn * const fn[2][4] = { + { + gen_helper_neon_zip8, + gen_helper_neon_zip16, + NULL, + NULL, + }, { + gen_helper_neon_qzip8, + gen_helper_neon_qzip16, + gen_helper_neon_qzip32, + NULL, + } + }; + return do_zip_uzp(s, a, fn[a->q][a->size]); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc) gen_rfe(s, pc, load_cpu_field(spsr)); } -static int gen_neon_unzip(int rd, int rm, int size, int q) -{ - TCGv_ptr pd, pm; - - if (!q && size == 2) { - return 1; - } - pd = vfp_reg_ptr(true, rd); - pm = vfp_reg_ptr(true, rm); - if (q) { - switch (size) { - case 0: - gen_helper_neon_qunzip8(pd, pm); - break; - case 1: - gen_helper_neon_qunzip16(pd, pm); - break; - case 2: - gen_helper_neon_qunzip32(pd, pm); - break; - default: - abort(); - } - } else { - switch (size) { - case 0: - gen_helper_neon_unzip8(pd, pm); - break; - case 1: - gen_helper_neon_unzip16(pd, pm); - break; - default: - abort(); - } - } - tcg_temp_free_ptr(pd); - tcg_temp_free_ptr(pm); - return 0; -} - -static int gen_neon_zip(int rd, int rm, int size, int q) -{ - TCGv_ptr pd, pm; - - if (!q && size == 2) { - return 1; - } - pd = vfp_reg_ptr(true, rd); - pm = vfp_reg_ptr(true, rm); - if (q) { - switch (size) { - case 0: - gen_helper_neon_qzip8(pd, pm); - break; - case 1: - gen_helper_neon_qzip16(pd, pm); - break; - case 2: - gen_helper_neon_qzip32(pd, pm); - break; - default: - abort(); - } - } else { - switch (size) { - case 0: - gen_helper_neon_zip8(pd, pm); - break; - case 1: - gen_helper_neon_zip16(pd, pm); - break; - default: - abort(); - } - } - tcg_temp_free_ptr(pd); - tcg_temp_free_ptr(pm); - return 0; -} - static void gen_neon_trn_u8(TCGv_i32 t0, TCGv_i32 t1) { TCGv_i32 rd, tmp; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VREV64: case NEON_2RM_VPADDL: case NEON_2RM_VPADDL_U: case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: + case NEON_2RM_VUZP: + case NEON_2RM_VZIP: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_VUZP: - if (gen_neon_unzip(rd, rm, size, q)) { - return 1; - } - break; - case NEON_2RM_VZIP: - if (gen_neon_zip(rd, rm, size, q)) { - return 1; - } - break; case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: /* also VQMOVUN; op field and mnemonics don't line up */ if (rm & 1) { -- 2.20.1 Convert the Neon narrowing moves VMQNV, VQMOVN, VQMOVUN in the 2-reg-misc group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-5-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 9 ++++ target/arm/translate-neon.inc.c | 59 ++++++++++++++++++++++++ target/arm/translate.c | 81 +-------------------------------- 3 files changed, 70 insertions(+), 79 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm @2misc .... ... .. . .. size:2 .. .... . .... q:1 . . .... \ &2misc vm=%vm_dp vd=%vd_dp + @2misc_q0 .... ... .. . .. size:2 .. .... . .... . . . .... \ + &2misc vm=%vm_dp vd=%vd_dp q=0 VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc + + VMOVN 1111 001 11 . 11 .. 10 .... 0 0100 0 . 0 .... @2misc_q0 + # VQMOVUN: unsigned result (source is always signed) + VQMOVUN 1111 001 11 . 11 .. 10 .... 0 0100 1 . 0 .... @2misc_q0 + # VQMOVN: signed result, source may be signed (_S) or unsigned (_U) + VQMOVN_S 1111 001 11 . 11 .. 10 .... 0 0101 0 . 0 .... @2misc_q0 + VQMOVN_U 1111 001 11 . 11 .. 10 .... 0 0101 1 . 0 .... @2misc_q0 ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VZIP(DisasContext *s, arg_2misc *a) }; return do_zip_uzp(s, a, fn[a->q][a->size]); } + +static bool do_vmovn(DisasContext *s, arg_2misc *a, + NeonGenNarrowEnvFn *narrowfn) +{ + TCGv_i64 rm; + TCGv_i32 rd0, rd1; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!narrowfn) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + rm = tcg_temp_new_i64(); + rd0 = tcg_temp_new_i32(); + rd1 = tcg_temp_new_i32(); + + neon_load_reg64(rm, a->vm); + narrowfn(rd0, cpu_env, rm); + neon_load_reg64(rm, a->vm + 1); + narrowfn(rd1, cpu_env, rm); + neon_store_reg(a->vd, 0, rd0); + neon_store_reg(a->vd, 1, rd1); + tcg_temp_free_i64(rm); + return true; +} + +#define DO_VMOVN(INSN, FUNC) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + static NeonGenNarrowEnvFn * const narrowfn[] = { \ + FUNC##8, \ + FUNC##16, \ + FUNC##32, \ + NULL, \ + }; \ + return do_vmovn(s, a, narrowfn[a->size]); \ + } + +DO_VMOVN(VMOVN, gen_neon_narrow_u) +DO_VMOVN(VQMOVUN, gen_helper_neon_unarrow_sat) +DO_VMOVN(VQMOVN_S, gen_helper_neon_narrow_sat_s) +DO_VMOVN(VQMOVN_U, gen_helper_neon_narrow_sat_u) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) tcg_temp_free_i32(rd); } -static inline void gen_neon_narrow(int size, TCGv_i32 dest, TCGv_i64 src) -{ - switch (size) { - case 0: gen_helper_neon_narrow_u8(dest, src); break; - case 1: gen_helper_neon_narrow_u16(dest, src); break; - case 2: tcg_gen_extrl_i64_i32(dest, src); break; - default: abort(); - } -} - -static inline void gen_neon_narrow_sats(int size, TCGv_i32 dest, TCGv_i64 src) -{ - switch (size) { - case 0: gen_helper_neon_narrow_sat_s8(dest, cpu_env, src); break; - case 1: gen_helper_neon_narrow_sat_s16(dest, cpu_env, src); break; - case 2: gen_helper_neon_narrow_sat_s32(dest, cpu_env, src); break; - default: abort(); - } -} - -static inline void gen_neon_narrow_satu(int size, TCGv_i32 dest, TCGv_i64 src) -{ - switch (size) { - case 0: gen_helper_neon_narrow_sat_u8(dest, cpu_env, src); break; - case 1: gen_helper_neon_narrow_sat_u16(dest, cpu_env, src); break; - case 2: gen_helper_neon_narrow_sat_u32(dest, cpu_env, src); break; - default: abort(); - } -} - -static inline void gen_neon_unarrow_sats(int size, TCGv_i32 dest, TCGv_i64 src) -{ - switch (size) { - case 0: gen_helper_neon_unarrow_sat8(dest, cpu_env, src); break; - case 1: gen_helper_neon_unarrow_sat16(dest, cpu_env, src); break; - case 2: gen_helper_neon_unarrow_sat32(dest, cpu_env, src); break; - default: abort(); - } -} - static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) { if (u) { @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) tcg_temp_free_i32(src); } -static void gen_neon_narrow_op(int op, int u, int size, - TCGv_i32 dest, TCGv_i64 src) -{ - if (op) { - if (u) { - gen_neon_unarrow_sats(size, dest, src); - } else { - gen_neon_narrow(size, dest, src); - } - } else { - if (u) { - gen_neon_narrow_satu(size, dest, src); - } else { - gen_neon_narrow_sats(size, dest, src); - } - } -} - /* Symbolic constants for op fields for Neon 2-register miscellaneous. * The values correspond to bits [17:16,10:7]; see the ARM ARM DDI0406B * table A7-13. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) !arm_dc_feature(s, ARM_FEATURE_V8)) { return 1; } - if ((op != NEON_2RM_VMOVN && op != NEON_2RM_VQMOVN) && - q && ((rm | rd) & 1)) { + if (q && ((rm | rd) & 1)) { return 1; } switch (op) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: case NEON_2RM_VUZP: case NEON_2RM_VZIP: + case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: - /* also VQMOVUN; op field and mnemonics don't line up */ - if (rm & 1) { - return 1; - } - tmp2 = NULL; - for (pass = 0; pass < 2; pass++) { - neon_load_reg64(cpu_V0, rm + pass); - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == NEON_2RM_VMOVN, q, size, - tmp, cpu_V0); - if (pass == 0) { - tmp2 = tmp; - } else { - neon_store_reg(rd, 0, tmp2); - neon_store_reg(rd, 1, tmp); - } - } - break; case NEON_2RM_VSHLL: if (q || (rd & 1)) { return 1; -- 2.20.1 Convert the VSHLL insn in the 2-reg-misc Neon group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-6-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 2 ++ target/arm/translate-neon.inc.c | 52 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 35 +--------------------- 3 files changed, 55 insertions(+), 34 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm # VQMOVN: signed result, source may be signed (_S) or unsigned (_U) VQMOVN_S 1111 001 11 . 11 .. 10 .... 0 0101 0 . 0 .... @2misc_q0 VQMOVN_U 1111 001 11 . 11 .. 10 .... 0 0101 1 . 0 .... @2misc_q0 + + VSHLL 1111 001 11 . 11 .. 10 .... 0 0110 0 . 0 .... @2misc_q0 ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_VMOVN(VMOVN, gen_neon_narrow_u) DO_VMOVN(VQMOVUN, gen_helper_neon_unarrow_sat) DO_VMOVN(VQMOVN_S, gen_helper_neon_narrow_sat_s) DO_VMOVN(VQMOVN_U, gen_helper_neon_narrow_sat_u) + +static bool trans_VSHLL(DisasContext *s, arg_2misc *a) +{ + TCGv_i32 rm0, rm1; + TCGv_i64 rd; + static NeonGenWidenFn * const widenfns[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + NULL, + }; + NeonGenWidenFn *widenfn = widenfns[a->size]; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vd & 1) { + return false; + } + + if (!widenfn) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + rd = tcg_temp_new_i64(); + + rm0 = neon_load_reg(a->vm, 0); + rm1 = neon_load_reg(a->vm, 1); + + widenfn(rd, rm0); + tcg_gen_shli_i64(rd, rd, 8 << a->size); + neon_store_reg64(rd, a->vd); + widenfn(rd, rm1); + tcg_gen_shli_i64(rd, rd, 8 << a->size); + neon_store_reg64(rd, a->vd + 1); + + tcg_temp_free_i64(rd); + tcg_temp_free_i32(rm0); + tcg_temp_free_i32(rm1); + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) tcg_temp_free_i32(rd); } -static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) -{ - if (u) { - switch (size) { - case 0: gen_helper_neon_widen_u8(dest, src); break; - case 1: gen_helper_neon_widen_u16(dest, src); break; - case 2: tcg_gen_extu_i32_i64(dest, src); break; - default: abort(); - } - } else { - switch (size) { - case 0: gen_helper_neon_widen_s8(dest, src); break; - case 1: gen_helper_neon_widen_s16(dest, src); break; - case 2: tcg_gen_ext_i32_i64(dest, src); break; - default: abort(); - } - } - tcg_temp_free_i32(src); -} - /* Symbolic constants for op fields for Neon 2-register miscellaneous. * The values correspond to bits [17:16,10:7]; see the ARM ARM DDI0406B * table A7-13. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VUZP: case NEON_2RM_VZIP: case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: + case NEON_2RM_VSHLL: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_VSHLL: - if (q || (rd & 1)) { - return 1; - } - tmp = neon_load_reg(rm, 0); - tmp2 = neon_load_reg(rm, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 1) - tmp = tmp2; - gen_neon_widen(cpu_V0, tmp, size, 1); - tcg_gen_shli_i64(cpu_V0, cpu_V0, 8 << size); - neon_store_reg64(cpu_V0, rd + pass); - } - break; case NEON_2RM_VCVT_F16_F32: { TCGv_ptr fpst; -- 2.20.1 Convert the Neon insns in the 2-reg-misc group which are VCVT between f32 and f16 to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-7-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 3 ++ target/arm/translate-neon.inc.c | 96 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 65 ++-------------------- 3 files changed, 102 insertions(+), 62 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VQMOVN_U 1111 001 11 . 11 .. 10 .... 0 0101 1 . 0 .... @2misc_q0 VSHLL 1111 001 11 . 11 .. 10 .... 0 0110 0 . 0 .... @2misc_q0 + + VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 + VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL(DisasContext *s, arg_2misc *a) tcg_temp_free_i32(rm1); return true; } + +static bool trans_VCVT_F16_F32(DisasContext *s, arg_2misc *a) +{ + TCGv_ptr fpst; + TCGv_i32 ahp, tmp, tmp2, tmp3; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON) || + !dc_isar_feature(aa32_fp16_spconv, s)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm & 1) || (a->size != 1)) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(true); + ahp = get_ahp_flag(); + tmp = neon_load_reg(a->vm, 0); + gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); + tmp2 = neon_load_reg(a->vm, 1); + gen_helper_vfp_fcvt_f32_to_f16(tmp2, tmp2, fpst, ahp); + tcg_gen_shli_i32(tmp2, tmp2, 16); + tcg_gen_or_i32(tmp2, tmp2, tmp); + tcg_temp_free_i32(tmp); + tmp = neon_load_reg(a->vm, 2); + gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); + tmp3 = neon_load_reg(a->vm, 3); + neon_store_reg(a->vd, 0, tmp2); + gen_helper_vfp_fcvt_f32_to_f16(tmp3, tmp3, fpst, ahp); + tcg_gen_shli_i32(tmp3, tmp3, 16); + tcg_gen_or_i32(tmp3, tmp3, tmp); + neon_store_reg(a->vd, 1, tmp3); + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(ahp); + tcg_temp_free_ptr(fpst); + + return true; +} + +static bool trans_VCVT_F32_F16(DisasContext *s, arg_2misc *a) +{ + TCGv_ptr fpst; + TCGv_i32 ahp, tmp, tmp2, tmp3; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON) || + !dc_isar_feature(aa32_fp16_spconv, s)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd & 1) || (a->size != 1)) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(true); + ahp = get_ahp_flag(); + tmp3 = tcg_temp_new_i32(); + tmp = neon_load_reg(a->vm, 0); + tmp2 = neon_load_reg(a->vm, 1); + tcg_gen_ext16u_i32(tmp3, tmp); + gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); + neon_store_reg(a->vd, 0, tmp3); + tcg_gen_shri_i32(tmp, tmp, 16); + gen_helper_vfp_fcvt_f16_to_f32(tmp, tmp, fpst, ahp); + neon_store_reg(a->vd, 1, tmp); + tmp3 = tcg_temp_new_i32(); + tcg_gen_ext16u_i32(tmp3, tmp2); + gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); + neon_store_reg(a->vd, 2, tmp3); + tcg_gen_shri_i32(tmp2, tmp2, 16); + gen_helper_vfp_fcvt_f16_to_f32(tmp2, tmp2, fpst, ahp); + neon_store_reg(a->vd, 3, tmp2); + tcg_temp_free_i32(ahp); + tcg_temp_free_ptr(fpst); + + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int pass; int u; int vec_size; - TCGv_i32 tmp, tmp2, tmp3; + TCGv_i32 tmp, tmp2; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return 1; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VZIP: case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: case NEON_2RM_VSHLL: + case NEON_2RM_VCVT_F16_F32: + case NEON_2RM_VCVT_F32_F16: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_VCVT_F16_F32: - { - TCGv_ptr fpst; - TCGv_i32 ahp; - - if (!dc_isar_feature(aa32_fp16_spconv, s) || - q || (rm & 1)) { - return 1; - } - fpst = get_fpstatus_ptr(true); - ahp = get_ahp_flag(); - tmp = neon_load_reg(rm, 0); - gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); - tmp2 = neon_load_reg(rm, 1); - gen_helper_vfp_fcvt_f32_to_f16(tmp2, tmp2, fpst, ahp); - tcg_gen_shli_i32(tmp2, tmp2, 16); - tcg_gen_or_i32(tmp2, tmp2, tmp); - tcg_temp_free_i32(tmp); - tmp = neon_load_reg(rm, 2); - gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); - tmp3 = neon_load_reg(rm, 3); - neon_store_reg(rd, 0, tmp2); - gen_helper_vfp_fcvt_f32_to_f16(tmp3, tmp3, fpst, ahp); - tcg_gen_shli_i32(tmp3, tmp3, 16); - tcg_gen_or_i32(tmp3, tmp3, tmp); - neon_store_reg(rd, 1, tmp3); - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(ahp); - tcg_temp_free_ptr(fpst); - break; - } - case NEON_2RM_VCVT_F32_F16: - { - TCGv_ptr fpst; - TCGv_i32 ahp; - if (!dc_isar_feature(aa32_fp16_spconv, s) || - q || (rd & 1)) { - return 1; - } - fpst = get_fpstatus_ptr(true); - ahp = get_ahp_flag(); - tmp3 = tcg_temp_new_i32(); - tmp = neon_load_reg(rm, 0); - tmp2 = neon_load_reg(rm, 1); - tcg_gen_ext16u_i32(tmp3, tmp); - gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); - neon_store_reg(rd, 0, tmp3); - tcg_gen_shri_i32(tmp, tmp, 16); - gen_helper_vfp_fcvt_f16_to_f32(tmp, tmp, fpst, ahp); - neon_store_reg(rd, 1, tmp); - tmp3 = tcg_temp_new_i32(); - tcg_gen_ext16u_i32(tmp3, tmp2); - gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); - neon_store_reg(rd, 2, tmp3); - tcg_gen_shri_i32(tmp2, tmp2, 16); - gen_helper_vfp_fcvt_f16_to_f32(tmp2, tmp2, fpst, ahp); - neon_store_reg(rd, 3, tmp2); - tcg_temp_free_i32(ahp); - tcg_temp_free_ptr(fpst); - break; - } case NEON_2RM_AESE: case NEON_2RM_AESMC: if (!dc_isar_feature(aa32_aes, s) || ((rm | rd) & 1)) { return 1; -- 2.20.1 Convert to decodetree the insns in the Neon 2-reg-misc grouping which we implement using gvec. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-8-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 11 +++++++ target/arm/translate-neon.inc.c | 55 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 35 +++++---------------- 3 files changed, 74 insertions(+), 27 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VPADDL_S 1111 001 11 . 11 .. 00 .... 0 0100 . . 0 .... @2misc VPADDL_U 1111 001 11 . 11 .. 00 .... 0 0101 . . 0 .... @2misc + VMVN 1111 001 11 . 11 .. 00 .... 0 1011 . . 0 .... @2misc + VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc VPADAL_U 1111 001 11 . 11 .. 00 .... 0 1101 . . 0 .... @2misc + VCGT0 1111 001 11 . 11 .. 01 .... 0 0000 . . 0 .... @2misc + VCGE0 1111 001 11 . 11 .. 01 .... 0 0001 . . 0 .... @2misc + VCEQ0 1111 001 11 . 11 .. 01 .... 0 0010 . . 0 .... @2misc + VCLE0 1111 001 11 . 11 .. 01 .... 0 0011 . . 0 .... @2misc + VCLT0 1111 001 11 . 11 .. 01 .... 0 0100 . . 0 .... @2misc + + VABS 1111 001 11 . 11 .. 01 .... 0 0110 . . 0 .... @2misc + VNEG 1111 001 11 . 11 .. 01 .... 0 0111 . . 0 .... @2misc + VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_F32_F16(DisasContext *s, arg_2misc *a) return true; } + +static bool do_2misc_vec(DisasContext *s, arg_2misc *a, GVecGen2Fn *fn) +{ + int vec_size = a->q ? 16 : 8; + int rd_ofs = neon_reg_offset(a->vd, 0); + int rm_ofs = neon_reg_offset(a->vm, 0); + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size == 3) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fn(a->size, rd_ofs, rm_ofs, vec_size, vec_size); + + return true; +} + +#define DO_2MISC_VEC(INSN, FN) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_2misc_vec(s, a, FN); \ + } + +DO_2MISC_VEC(VNEG, tcg_gen_gvec_neg) +DO_2MISC_VEC(VABS, tcg_gen_gvec_abs) +DO_2MISC_VEC(VCEQ0, gen_gvec_ceq0) +DO_2MISC_VEC(VCGT0, gen_gvec_cgt0) +DO_2MISC_VEC(VCLE0, gen_gvec_cle0) +DO_2MISC_VEC(VCGE0, gen_gvec_cge0) +DO_2MISC_VEC(VCLT0, gen_gvec_clt0) + +static bool trans_VMVN(DisasContext *s, arg_2misc *a) +{ + if (a->size != 0) { + return false; + } + return do_2misc_vec(s, a, tcg_gen_gvec_not); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int size; int pass; int u; - int vec_size; TCGv_i32 tmp, tmp2; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) VFP_DREG_D(rd, insn); VFP_DREG_M(rm, insn); size = (insn >> 20) & 3; - vec_size = q ? 16 : 8; rd_ofs = neon_reg_offset(rd, 0); rm_ofs = neon_reg_offset(rm, 0); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VSHLL: case NEON_2RM_VCVT_F16_F32: case NEON_2RM_VCVT_F32_F16: + case NEON_2RM_VMVN: + case NEON_2RM_VNEG: + case NEON_2RM_VABS: + case NEON_2RM_VCEQ0: + case NEON_2RM_VCGT0: + case NEON_2RM_VCLE0: + case NEON_2RM_VCGE0: + case NEON_2RM_VCLT0: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) q ? gen_helper_crypto_sha256su0 : gen_helper_crypto_sha1su1); break; - case NEON_2RM_VMVN: - tcg_gen_gvec_not(0, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VNEG: - tcg_gen_gvec_neg(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VABS: - tcg_gen_gvec_abs(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - - case NEON_2RM_VCEQ0: - gen_gvec_ceq0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VCGT0: - gen_gvec_cgt0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VCLE0: - gen_gvec_cle0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VCGE0: - gen_gvec_cge0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; - case NEON_2RM_VCLT0: - gen_gvec_clt0(size, rd_ofs, rm_ofs, vec_size, vec_size); - break; default: elementwise: -- 2.20.1 Convert the Neon-2-reg misc crypto ops (AESE, AESMC, SHA1H, SHA1SU1) to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-9-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 12 ++++++++ target/arm/translate-neon.inc.c | 42 ++++++++++++++++++++++++++ target/arm/translate.c | 52 +++------------------------------ 3 files changed, 58 insertions(+), 48 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm &2misc vm=%vm_dp vd=%vd_dp @2misc_q0 .... ... .. . .. size:2 .. .... . .... . . . .... \ &2misc vm=%vm_dp vd=%vd_dp q=0 + @2misc_q1 .... ... .. . .. size:2 .. .... . .... . . . .... \ + &2misc vm=%vm_dp vd=%vd_dp q=1 VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc VPADDL_S 1111 001 11 . 11 .. 00 .... 0 0100 . . 0 .... @2misc VPADDL_U 1111 001 11 . 11 .. 00 .... 0 0101 . . 0 .... @2misc + AESE 1111 001 11 . 11 .. 00 .... 0 0110 0 . 0 .... @2misc_q1 + AESD 1111 001 11 . 11 .. 00 .... 0 0110 1 . 0 .... @2misc_q1 + AESMC 1111 001 11 . 11 .. 00 .... 0 0111 0 . 0 .... @2misc_q1 + AESIMC 1111 001 11 . 11 .. 00 .... 0 0111 1 . 0 .... @2misc_q1 + VMVN 1111 001 11 . 11 .. 00 .... 0 1011 . . 0 .... @2misc VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VCLE0 1111 001 11 . 11 .. 01 .... 0 0011 . . 0 .... @2misc VCLT0 1111 001 11 . 11 .. 01 .... 0 0100 . . 0 .... @2misc + SHA1H 1111 001 11 . 11 .. 01 .... 0 0101 1 . 0 .... @2misc_q1 + VABS 1111 001 11 . 11 .. 01 .... 0 0110 . . 0 .... @2misc VNEG 1111 001 11 . 11 .. 01 .... 0 0111 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VSHLL 1111 001 11 . 11 .. 10 .... 0 0110 0 . 0 .... @2misc_q0 + SHA1SU1 1111 001 11 . 11 .. 10 .... 0 0111 0 . 0 .... @2misc_q1 + SHA256SU0 1111 001 11 . 11 .. 10 .... 0 0111 1 . 0 .... @2misc_q1 + VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 ] diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMVN(DisasContext *s, arg_2misc *a) } return do_2misc_vec(s, a, tcg_gen_gvec_not); } + +#define WRAP_2M_3_OOL_FN(WRAPNAME, FUNC, DATA) \ + static void WRAPNAME(unsigned vece, uint32_t rd_ofs, \ + uint32_t rm_ofs, uint32_t oprsz, \ + uint32_t maxsz) \ + { \ + tcg_gen_gvec_3_ool(rd_ofs, rd_ofs, rm_ofs, oprsz, maxsz, \ + DATA, FUNC); \ + } + +#define WRAP_2M_2_OOL_FN(WRAPNAME, FUNC, DATA) \ + static void WRAPNAME(unsigned vece, uint32_t rd_ofs, \ + uint32_t rm_ofs, uint32_t oprsz, \ + uint32_t maxsz) \ + { \ + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, oprsz, maxsz, DATA, FUNC); \ + } + +WRAP_2M_3_OOL_FN(gen_AESE, gen_helper_crypto_aese, 0) +WRAP_2M_3_OOL_FN(gen_AESD, gen_helper_crypto_aese, 1) +WRAP_2M_2_OOL_FN(gen_AESMC, gen_helper_crypto_aesmc, 0) +WRAP_2M_2_OOL_FN(gen_AESIMC, gen_helper_crypto_aesmc, 1) +WRAP_2M_2_OOL_FN(gen_SHA1H, gen_helper_crypto_sha1h, 0) +WRAP_2M_2_OOL_FN(gen_SHA1SU1, gen_helper_crypto_sha1su1, 0) +WRAP_2M_2_OOL_FN(gen_SHA256SU0, gen_helper_crypto_sha256su0, 0) + +#define DO_2M_CRYPTO(INSN, FEATURE, SIZE) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + if (!dc_isar_feature(FEATURE, s) || a->size != SIZE) { \ + return false; \ + } \ + return do_2misc_vec(s, a, gen_##INSN); \ + } + +DO_2M_CRYPTO(AESE, aa32_aes, 0) +DO_2M_CRYPTO(AESD, aa32_aes, 0) +DO_2M_CRYPTO(AESMC, aa32_aes, 0) +DO_2M_CRYPTO(AESIMC, aa32_aes, 0) +DO_2M_CRYPTO(SHA1H, aa32_sha1, 2) +DO_2M_CRYPTO(SHA1SU1, aa32_sha1, 2) +DO_2M_CRYPTO(SHA256SU0, aa32_sha2, 2) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) { int op; int q; - int rd, rm, rd_ofs, rm_ofs; + int rd, rm; int size; int pass; int u; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) VFP_DREG_D(rd, insn); VFP_DREG_M(rm, insn); size = (insn >> 20) & 3; - rd_ofs = neon_reg_offset(rd, 0); - rm_ofs = neon_reg_offset(rm, 0); if ((insn & (1 << 23)) == 0) { /* Three register same length: handled by decodetree */ @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VCLE0: case NEON_2RM_VCGE0: case NEON_2RM_VCLT0: + case NEON_2RM_AESE: case NEON_2RM_AESMC: + case NEON_2RM_SHA1H: + case NEON_2RM_SHA1SU1: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) goto elementwise; } break; - case NEON_2RM_AESE: case NEON_2RM_AESMC: - if (!dc_isar_feature(aa32_aes, s) || ((rm | rd) & 1)) { - return 1; - } - /* - * Bit 6 is the lowest opcode bit; it distinguishes - * between encryption (AESE/AESMC) and decryption - * (AESD/AESIMC). - */ - if (op == NEON_2RM_AESE) { - tcg_gen_gvec_3_ool(vfp_reg_offset(true, rd), - vfp_reg_offset(true, rd), - vfp_reg_offset(true, rm), - 16, 16, extract32(insn, 6, 1), - gen_helper_crypto_aese); - } else { - tcg_gen_gvec_2_ool(vfp_reg_offset(true, rd), - vfp_reg_offset(true, rm), - 16, 16, extract32(insn, 6, 1), - gen_helper_crypto_aesmc); - } - break; - case NEON_2RM_SHA1H: - if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { - return 1; - } - tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, - gen_helper_crypto_sha1h); - break; - case NEON_2RM_SHA1SU1: - if ((rm | rd) & 1) { - return 1; - } - /* bit 6 (q): set -> SHA256SU0, cleared -> SHA1SU1 */ - if (q) { - if (!dc_isar_feature(aa32_sha2, s)) { - return 1; - } - } else if (!dc_isar_feature(aa32_sha1, s)) { - return 1; - } - tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, - q ? gen_helper_crypto_sha256su0 - : gen_helper_crypto_sha1su1); - break; default: elementwise: -- 2.20.1 The NeonGenOneOpFn typedef breaks with the pattern of the other NeonGen*Fn typedefs, because it is a TCGv_i64 -> TCGv_i64 operation but it does not have '64' in its name. Rename it to NeonGenOne64OpFn, so that the old name is available for a TCGv_i32 -> TCGv_i32 operation (which we will need in a subsequent commit). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-10-peter.maydell@linaro.org --- target/arm/translate.h | 2 +- target/arm/translate-a64.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void NeonGenWidenFn(TCGv_i64, TCGv_i32); typedef void NeonGenTwoOpWidenFn(TCGv_i64, TCGv_i32, TCGv_i32); typedef void NeonGenTwoSingleOPFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr); typedef void NeonGenTwoDoubleOPFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGv_ptr); -typedef void NeonGenOneOpFn(TCGv_i64, TCGv_i64); +typedef void NeonGenOne64OpFn(TCGv_i64, TCGv_i64); typedef void CryptoTwoOpFn(TCGv_ptr, TCGv_ptr); typedef void CryptoThreeOpIntFn(TCGv_ptr, TCGv_ptr, TCGv_i32); typedef void CryptoThreeOpFn(TCGv_ptr, TCGv_ptr, TCGv_ptr); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_2misc_pairwise(DisasContext *s, int opcode, bool u, } else { for (pass = 0; pass < maxpass; pass++) { TCGv_i64 tcg_op = tcg_temp_new_i64(); - NeonGenOneOpFn *genfn; - static NeonGenOneOpFn * const fns[2][2] = { + NeonGenOne64OpFn *genfn; + static NeonGenOne64OpFn * const fns[2][2] = { { gen_helper_neon_addlp_s8, gen_helper_neon_addlp_u8 }, { gen_helper_neon_addlp_s16, gen_helper_neon_addlp_u16 }, }; -- 2.20.1 All the other typedefs like these spell "Op" with a lowercase 'p'; remane the NeonGenTwoSingleOPFn and NeonGenTwoDoubleOPFn typedefs to match. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-11-peter.maydell@linaro.org --- target/arm/translate.h | 4 ++-- target/arm/translate-a64.c | 4 ++-- target/arm/translate-neon.inc.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void NeonGenNarrowFn(TCGv_i32, TCGv_i64); typedef void NeonGenNarrowEnvFn(TCGv_i32, TCGv_ptr, TCGv_i64); typedef void NeonGenWidenFn(TCGv_i64, TCGv_i32); typedef void NeonGenTwoOpWidenFn(TCGv_i64, TCGv_i32, TCGv_i32); -typedef void NeonGenTwoSingleOPFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr); -typedef void NeonGenTwoDoubleOPFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGv_ptr); +typedef void NeonGenTwoSingleOpFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr); +typedef void NeonGenTwoDoubleOpFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGv_ptr); typedef void NeonGenOne64OpFn(TCGv_i64, TCGv_i64); typedef void CryptoTwoOpFn(TCGv_ptr, TCGv_ptr); typedef void CryptoThreeOpIntFn(TCGv_ptr, TCGv_ptr, TCGv_i32); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, TCGv_i64 tcg_op = tcg_temp_new_i64(); TCGv_i64 tcg_zero = tcg_const_i64(0); TCGv_i64 tcg_res = tcg_temp_new_i64(); - NeonGenTwoDoubleOPFn *genfn; + NeonGenTwoDoubleOpFn *genfn; bool swap = false; int pass; @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, TCGv_i32 tcg_op = tcg_temp_new_i32(); TCGv_i32 tcg_zero = tcg_const_i32(0); TCGv_i32 tcg_res = tcg_temp_new_i32(); - NeonGenTwoSingleOPFn *genfn; + NeonGenTwoSingleOpFn *genfn; bool swap = false; int pass, maxpasses; diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) } static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a, - NeonGenTwoSingleOPFn *fn) + NeonGenTwoSingleOpFn *fn) { /* FP operations in 2-reg-and-shift group */ TCGv_i32 tmp, shiftv; -- 2.20.1 Make gen_swap_half() take a source and destination TCGv_i32 rather than modifying the input TCGv_i32; we're going to want to be able to use it with the more flexible function signature, and this also brings it into line with other functions like gen_rev16() and gen_revsh(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-12-peter.maydell@linaro.org --- target/arm/translate-neon.inc.c | 2 +- target/arm/translate.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) tcg_gen_bswap32_i32(tmp[half], tmp[half]); break; case 1: - gen_swap_half(tmp[half]); + gen_swap_half(tmp[half], tmp[half]); break; case 2: break; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_revsh(TCGv_i32 dest, TCGv_i32 var) } /* Swap low and high halfwords. */ -static void gen_swap_half(TCGv_i32 var) +static void gen_swap_half(TCGv_i32 dest, TCGv_i32 var) { - tcg_gen_rotri_i32(var, var, 16); + tcg_gen_rotri_i32(dest, var, 16); } /* Dual 16-bit add. Result placed in t0 and t1 is marked as dead. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VREV32: switch (size) { case 0: tcg_gen_bswap32_i32(tmp, tmp); break; - case 1: gen_swap_half(tmp); break; + case 1: gen_swap_half(tmp, tmp); break; default: abort(); } break; @@ -XXX,XX +XXX,XX @@ static bool op_smlad(DisasContext *s, arg_rrrr *a, bool m_swap, bool sub) t1 = load_reg(s, a->rn); t2 = load_reg(s, a->rm); if (m_swap) { - gen_swap_half(t2); + gen_swap_half(t2, t2); } gen_smul_dual(t1, t2); @@ -XXX,XX +XXX,XX @@ static bool op_smlald(DisasContext *s, arg_rrrr *a, bool m_swap, bool sub) t1 = load_reg(s, a->rn); t2 = load_reg(s, a->rm); if (m_swap) { - gen_swap_half(t2); + gen_swap_half(t2, t2); } gen_smul_dual(t1, t2); -- 2.20.1 Convert the VREV32 and VREV16 insns in the Neon 2-reg-misc group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-13-peter.maydell@linaro.org --- target/arm/translate.h | 1 + target/arm/neon-dp.decode | 2 ++ target/arm/translate-neon.inc.c | 55 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 12 ++----- 4 files changed, 60 insertions(+), 10 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void GVecGen4Fn(unsigned, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t); /* Function prototype for gen_ functions for calling Neon helpers */ +typedef void NeonGenOneOpFn(TCGv_i32, TCGv_i32); typedef void NeonGenOneOpEnvFn(TCGv_i32, TCGv_ptr, TCGv_i32); typedef void NeonGenTwoOpFn(TCGv_i32, TCGv_i32, TCGv_i32); typedef void NeonGenTwoOpEnvFn(TCGv_i32, TCGv_ptr, TCGv_i32, TCGv_i32); diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm &2misc vm=%vm_dp vd=%vd_dp q=1 VREV64 1111 001 11 . 11 .. 00 .... 0 0000 . . 0 .... @2misc + VREV32 1111 001 11 . 11 .. 00 .... 0 0001 . . 0 .... @2misc + VREV16 1111 001 11 . 11 .. 00 .... 0 0010 . . 0 .... @2misc VPADDL_S 1111 001 11 . 11 .. 00 .... 0 0100 . . 0 .... @2misc VPADDL_U 1111 001 11 . 11 .. 00 .... 0 0101 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2M_CRYPTO(AESIMC, aa32_aes, 0) DO_2M_CRYPTO(SHA1H, aa32_sha1, 2) DO_2M_CRYPTO(SHA1SU1, aa32_sha1, 2) DO_2M_CRYPTO(SHA256SU0, aa32_sha2, 2) + +static bool do_2misc(DisasContext *s, arg_2misc *a, NeonGenOneOpFn *fn) +{ + int pass; + + /* Handle a 2-reg-misc operation by iterating 32 bits at a time */ + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (!fn) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + fn(tmp, tmp); + neon_store_reg(a->vd, pass, tmp); + } + + return true; +} + +static bool trans_VREV32(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + tcg_gen_bswap32_i32, + gen_swap_half, + NULL, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} + +static bool trans_VREV16(DisasContext *s, arg_2misc *a) +{ + if (a->size != 0) { + return false; + } + return do_2misc(s, a, gen_rev16); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_AESE: case NEON_2RM_AESMC: case NEON_2RM_SHA1H: case NEON_2RM_SHA1SU1: + case NEON_2RM_VREV32: + case NEON_2RM_VREV16: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VREV32: - switch (size) { - case 0: tcg_gen_bswap32_i32(tmp, tmp); break; - case 1: gen_swap_half(tmp, tmp); break; - default: abort(); - } - break; - case NEON_2RM_VREV16: - gen_rev16(tmp, tmp); - break; case NEON_2RM_VCLS: switch (size) { case 0: gen_helper_neon_cls_s8(tmp, tmp); break; -- 2.20.1 Convert the remaining ops in the Neon 2-reg-misc group which can be implemented simply with our do_2misc() helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-14-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 10 +++++ target/arm/translate-neon.inc.c | 69 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 38 ++++-------------- 3 files changed, 86 insertions(+), 31 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm AESMC 1111 001 11 . 11 .. 00 .... 0 0111 0 . 0 .... @2misc_q1 AESIMC 1111 001 11 . 11 .. 00 .... 0 0111 1 . 0 .... @2misc_q1 + VCLS 1111 001 11 . 11 .. 00 .... 0 1000 . . 0 .... @2misc + VCLZ 1111 001 11 . 11 .. 00 .... 0 1001 . . 0 .... @2misc + VCNT 1111 001 11 . 11 .. 00 .... 0 1010 . . 0 .... @2misc + VMVN 1111 001 11 . 11 .. 00 .... 0 1011 . . 0 .... @2misc VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VABS 1111 001 11 . 11 .. 01 .... 0 0110 . . 0 .... @2misc VNEG 1111 001 11 . 11 .. 01 .... 0 0111 . . 0 .... @2misc + VABS_F 1111 001 11 . 11 .. 01 .... 0 1110 . . 0 .... @2misc + VNEG_F 1111 001 11 . 11 .. 01 .... 0 1111 . . 0 .... @2misc + VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 + + VRECPE 1111 001 11 . 11 .. 11 .... 0 1000 . . 0 .... @2misc + VRSQRTE 1111 001 11 . 11 .. 11 .... 0 1001 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VREV16(DisasContext *s, arg_2misc *a) } return do_2misc(s, a, gen_rev16); } + +static bool trans_VCLS(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + gen_helper_neon_cls_s8, + gen_helper_neon_cls_s16, + gen_helper_neon_cls_s32, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} + +static void do_VCLZ_32(TCGv_i32 rd, TCGv_i32 rm) +{ + tcg_gen_clzi_i32(rd, rm, 32); +} + +static bool trans_VCLZ(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + gen_helper_neon_clz_u8, + gen_helper_neon_clz_u16, + do_VCLZ_32, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} + +static bool trans_VCNT(DisasContext *s, arg_2misc *a) +{ + if (a->size != 0) { + return false; + } + return do_2misc(s, a, gen_helper_neon_cnt_u8); +} + +static bool trans_VABS_F(DisasContext *s, arg_2misc *a) +{ + if (a->size != 2) { + return false; + } + /* TODO: FP16 : size == 1 */ + return do_2misc(s, a, gen_helper_vfp_abss); +} + +static bool trans_VNEG_F(DisasContext *s, arg_2misc *a) +{ + if (a->size != 2) { + return false; + } + /* TODO: FP16 : size == 1 */ + return do_2misc(s, a, gen_helper_vfp_negs); +} + +static bool trans_VRECPE(DisasContext *s, arg_2misc *a) +{ + if (a->size != 2) { + return false; + } + return do_2misc(s, a, gen_helper_recpe_u32); +} + +static bool trans_VRSQRTE(DisasContext *s, arg_2misc *a) +{ + if (a->size != 2) { + return false; + } + return do_2misc(s, a, gen_helper_rsqrte_u32); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_SHA1SU1: case NEON_2RM_VREV32: case NEON_2RM_VREV16: + case NEON_2RM_VCLS: + case NEON_2RM_VCLZ: + case NEON_2RM_VCNT: + case NEON_2RM_VABS_F: + case NEON_2RM_VNEG_F: + case NEON_2RM_VRECPE: + case NEON_2RM_VRSQRTE: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VCLS: - switch (size) { - case 0: gen_helper_neon_cls_s8(tmp, tmp); break; - case 1: gen_helper_neon_cls_s16(tmp, tmp); break; - case 2: gen_helper_neon_cls_s32(tmp, tmp); break; - default: abort(); - } - break; - case NEON_2RM_VCLZ: - switch (size) { - case 0: gen_helper_neon_clz_u8(tmp, tmp); break; - case 1: gen_helper_neon_clz_u16(tmp, tmp); break; - case 2: tcg_gen_clzi_i32(tmp, tmp, 32); break; - default: abort(); - } - break; - case NEON_2RM_VCNT: - gen_helper_neon_cnt_u8(tmp, tmp); - break; case NEON_2RM_VQABS: switch (size) { case 0: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(fpstatus); break; } - case NEON_2RM_VABS_F: - gen_helper_vfp_abss(tmp, tmp); - break; - case NEON_2RM_VNEG_F: - gen_helper_vfp_negs(tmp, tmp); - break; case NEON_2RM_VSWP: tmp2 = neon_load_reg(rd, pass); neon_store_reg(rm, pass, tmp2); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(fpst); break; } - case NEON_2RM_VRECPE: - gen_helper_recpe_u32(tmp, tmp); - break; - case NEON_2RM_VRSQRTE: - gen_helper_rsqrte_u32(tmp, tmp); - break; case NEON_2RM_VRECPE_F: { TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.20.1 Convert the Neon VQABS and VQNEG insns to decodetree. Since these are the only ones which need cpu_env passing to the helper, we wrap the helper rather than creating a whole new do_2misc_env() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-15-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 3 +++ target/arm/translate-neon.inc.c | 35 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 30 ++-------------------------- 3 files changed, 40 insertions(+), 28 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VPADAL_S 1111 001 11 . 11 .. 00 .... 0 1100 . . 0 .... @2misc VPADAL_U 1111 001 11 . 11 .. 00 .... 0 1101 . . 0 .... @2misc + VQABS 1111 001 11 . 11 .. 00 .... 0 1110 . . 0 .... @2misc + VQNEG 1111 001 11 . 11 .. 00 .... 0 1111 . . 0 .... @2misc + VCGT0 1111 001 11 . 11 .. 01 .... 0 0000 . . 0 .... @2misc VCGE0 1111 001 11 . 11 .. 01 .... 0 0001 . . 0 .... @2misc VCEQ0 1111 001 11 . 11 .. 01 .... 0 0010 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VRSQRTE(DisasContext *s, arg_2misc *a) } return do_2misc(s, a, gen_helper_rsqrte_u32); } + +#define WRAP_1OP_ENV_FN(WRAPNAME, FUNC) \ + static void WRAPNAME(TCGv_i32 d, TCGv_i32 m) \ + { \ + FUNC(d, cpu_env, m); \ + } + +WRAP_1OP_ENV_FN(gen_VQABS_s8, gen_helper_neon_qabs_s8) +WRAP_1OP_ENV_FN(gen_VQABS_s16, gen_helper_neon_qabs_s16) +WRAP_1OP_ENV_FN(gen_VQABS_s32, gen_helper_neon_qabs_s32) +WRAP_1OP_ENV_FN(gen_VQNEG_s8, gen_helper_neon_qneg_s8) +WRAP_1OP_ENV_FN(gen_VQNEG_s16, gen_helper_neon_qneg_s16) +WRAP_1OP_ENV_FN(gen_VQNEG_s32, gen_helper_neon_qneg_s32) + +static bool trans_VQABS(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + gen_VQABS_s8, + gen_VQABS_s16, + gen_VQABS_s32, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} + +static bool trans_VQNEG(DisasContext *s, arg_2misc *a) +{ + static NeonGenOneOpFn * const fn[] = { + gen_VQNEG_s8, + gen_VQNEG_s16, + gen_VQNEG_s32, + NULL, + }; + return do_2misc(s, a, fn[a->size]); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VNEG_F: case NEON_2RM_VRECPE: case NEON_2RM_VRSQRTE: + case NEON_2RM_VQABS: + case NEON_2RM_VQNEG: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VQABS: - switch (size) { - case 0: - gen_helper_neon_qabs_s8(tmp, cpu_env, tmp); - break; - case 1: - gen_helper_neon_qabs_s16(tmp, cpu_env, tmp); - break; - case 2: - gen_helper_neon_qabs_s32(tmp, cpu_env, tmp); - break; - default: abort(); - } - break; - case NEON_2RM_VQNEG: - switch (size) { - case 0: - gen_helper_neon_qneg_s8(tmp, cpu_env, tmp); - break; - case 1: - gen_helper_neon_qneg_s16(tmp, cpu_env, tmp); - break; - case 2: - gen_helper_neon_qneg_s32(tmp, cpu_env, tmp); - break; - default: abort(); - } - break; case NEON_2RM_VCGT0_F: { TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.20.1 Convert the Neon 2-reg-misc insns which are implemented with simple calls to functions that take the input, output and fpstatus pointer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-16-peter.maydell@linaro.org --- target/arm/translate.h | 1 + target/arm/neon-dp.decode | 8 +++++ target/arm/translate-neon.inc.c | 62 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 56 ++++------------------------- 4 files changed, 78 insertions(+), 49 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef void NeonGenNarrowFn(TCGv_i32, TCGv_i64); typedef void NeonGenNarrowEnvFn(TCGv_i32, TCGv_ptr, TCGv_i64); typedef void NeonGenWidenFn(TCGv_i64, TCGv_i32); typedef void NeonGenTwoOpWidenFn(TCGv_i64, TCGv_i32, TCGv_i32); +typedef void NeonGenOneSingleOpFn(TCGv_i32, TCGv_i32, TCGv_ptr); typedef void NeonGenTwoSingleOpFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr); typedef void NeonGenTwoDoubleOpFn(TCGv_i64, TCGv_i64, TCGv_i64, TCGv_ptr); typedef void NeonGenOne64OpFn(TCGv_i64, TCGv_i64); diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm SHA1SU1 1111 001 11 . 11 .. 10 .... 0 0111 0 . 0 .... @2misc_q1 SHA256SU0 1111 001 11 . 11 .. 10 .... 0 0111 1 . 0 .... @2misc_q1 + VRINTX 1111 001 11 . 11 .. 10 .... 0 1001 . . 0 .... @2misc + VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 VRECPE 1111 001 11 . 11 .. 11 .... 0 1000 . . 0 .... @2misc VRSQRTE 1111 001 11 . 11 .. 11 .... 0 1001 . . 0 .... @2misc + VRECPE_F 1111 001 11 . 11 .. 11 .... 0 1010 . . 0 .... @2misc + VRSQRTE_F 1111 001 11 . 11 .. 11 .... 0 1011 . . 0 .... @2misc + VCVT_FS 1111 001 11 . 11 .. 11 .... 0 1100 . . 0 .... @2misc + VCVT_FU 1111 001 11 . 11 .. 11 .... 0 1101 . . 0 .... @2misc + VCVT_SF 1111 001 11 . 11 .. 11 .... 0 1110 . . 0 .... @2misc + VCVT_UF 1111 001 11 . 11 .. 11 .... 0 1111 . . 0 .... @2misc ] # Subgroup for size != 0b11 diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VQNEG(DisasContext *s, arg_2misc *a) }; return do_2misc(s, a, fn[a->size]); } + +static bool do_2misc_fp(DisasContext *s, arg_2misc *a, + NeonGenOneSingleOpFn *fn) +{ + int pass; + TCGv_ptr fpst; + + /* Handle a 2-reg-misc operation by iterating 32 bits at a time */ + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size != 2) { + /* TODO: FP16 will be the size == 1 case */ + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(1); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + fn(tmp, tmp, fpst); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_ptr(fpst); + + return true; +} + +#define DO_2MISC_FP(INSN, FUNC) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_2misc_fp(s, a, FUNC); \ + } + +DO_2MISC_FP(VRECPE_F, gen_helper_recpe_f32) +DO_2MISC_FP(VRSQRTE_F, gen_helper_rsqrte_f32) +DO_2MISC_FP(VCVT_FS, gen_helper_vfp_sitos) +DO_2MISC_FP(VCVT_FU, gen_helper_vfp_uitos) +DO_2MISC_FP(VCVT_SF, gen_helper_vfp_tosizs) +DO_2MISC_FP(VCVT_UF, gen_helper_vfp_touizs) + +static bool trans_VRINTX(DisasContext *s, arg_2misc *a) +{ + if (!arm_dc_feature(s, ARM_FEATURE_V8)) { + return false; + } + return do_2misc_fp(s, a, gen_helper_rints_exact); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VRSQRTE: case NEON_2RM_VQABS: case NEON_2RM_VQNEG: + case NEON_2RM_VRECPE_F: + case NEON_2RM_VRSQRTE_F: + case NEON_2RM_VCVT_FS: + case NEON_2RM_VCVT_FU: + case NEON_2RM_VCVT_SF: + case NEON_2RM_VCVT_UF: + case NEON_2RM_VRINTX: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_i32(tcg_rmode); break; } - case NEON_2RM_VRINTX: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_rints_exact(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } case NEON_2RM_VCVTAU: case NEON_2RM_VCVTAS: case NEON_2RM_VCVTNU: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(fpst); break; } - case NEON_2RM_VRECPE_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_recpe_f32(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VRSQRTE_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_rsqrte_f32(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCVT_FS: /* VCVT.F32.S32 */ - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_vfp_sitos(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCVT_FU: /* VCVT.F32.U32 */ - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_vfp_uitos(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCVT_SF: /* VCVT.S32.F32 */ - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_vfp_tosizs(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCVT_UF: /* VCVT.U32.F32 */ - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - gen_helper_vfp_touizs(tmp, tmp, fpstatus); - tcg_temp_free_ptr(fpstatus); - break; - } default: /* Reserved op values were caught by the * neon_2rm_sizes[] check earlier. -- 2.20.1 Convert the fp-compare-with-zero insns in the Neon 2-reg-misc group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-17-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 6 ++++ target/arm/translate-neon.inc.c | 28 ++++++++++++++++++ target/arm/translate.c | 50 ++++----------------------------- 3 files changed, 39 insertions(+), 45 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VABS 1111 001 11 . 11 .. 01 .... 0 0110 . . 0 .... @2misc VNEG 1111 001 11 . 11 .. 01 .... 0 0111 . . 0 .... @2misc + VCGT0_F 1111 001 11 . 11 .. 01 .... 0 1000 . . 0 .... @2misc + VCGE0_F 1111 001 11 . 11 .. 01 .... 0 1001 . . 0 .... @2misc + VCEQ0_F 1111 001 11 . 11 .. 01 .... 0 1010 . . 0 .... @2misc + VCLE0_F 1111 001 11 . 11 .. 01 .... 0 1011 . . 0 .... @2misc + VCLT0_F 1111 001 11 . 11 .. 01 .... 0 1100 . . 0 .... @2misc + VABS_F 1111 001 11 . 11 .. 01 .... 0 1110 . . 0 .... @2misc VNEG_F 1111 001 11 . 11 .. 01 .... 0 1111 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTX(DisasContext *s, arg_2misc *a) } return do_2misc_fp(s, a, gen_helper_rints_exact); } + +#define WRAP_FP_CMP0_FWD(WRAPNAME, FUNC) \ + static void WRAPNAME(TCGv_i32 d, TCGv_i32 m, TCGv_ptr fpst) \ + { \ + TCGv_i32 zero = tcg_const_i32(0); \ + FUNC(d, m, zero, fpst); \ + tcg_temp_free_i32(zero); \ + } +#define WRAP_FP_CMP0_REV(WRAPNAME, FUNC) \ + static void WRAPNAME(TCGv_i32 d, TCGv_i32 m, TCGv_ptr fpst) \ + { \ + TCGv_i32 zero = tcg_const_i32(0); \ + FUNC(d, zero, m, fpst); \ + tcg_temp_free_i32(zero); \ + } + +#define DO_FP_CMP0(INSN, FUNC, REV) \ + WRAP_FP_CMP0_##REV(gen_##INSN, FUNC) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_2misc_fp(s, a, gen_##INSN); \ + } + +DO_FP_CMP0(VCGT0_F, gen_helper_neon_cgt_f32, FWD) +DO_FP_CMP0(VCGE0_F, gen_helper_neon_cge_f32, FWD) +DO_FP_CMP0(VCEQ0_F, gen_helper_neon_ceq_f32, FWD) +DO_FP_CMP0(VCLE0_F, gen_helper_neon_cge_f32, REV) +DO_FP_CMP0(VCLT0_F, gen_helper_neon_cgt_f32, REV) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VCVT_SF: case NEON_2RM_VCVT_UF: case NEON_2RM_VRINTX: + case NEON_2RM_VCGT0_F: + case NEON_2RM_VCGE0_F: + case NEON_2RM_VCEQ0_F: + case NEON_2RM_VCLE0_F: + case NEON_2RM_VCLT0_F: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VCGT0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_cgt_f32(tmp, tmp, tmp2, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCGE0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_cge_f32(tmp, tmp, tmp2, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCEQ0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_ceq_f32(tmp, tmp, tmp2, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCLE0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_cge_f32(tmp, tmp2, tmp, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } - case NEON_2RM_VCLT0_F: - { - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - tmp2 = tcg_const_i32(0); - gen_helper_neon_cgt_f32(tmp, tmp2, tmp, fpstatus); - tcg_temp_free_i32(tmp2); - tcg_temp_free_ptr(fpstatus); - break; - } case NEON_2RM_VSWP: tmp2 = neon_load_reg(rd, pass); neon_store_reg(rm, pass, tmp2); -- 2.20.1 Convert the Neon 2-reg-misc VRINT insns to decodetree. Giving these insns their own do_vrint() function allows us to change the rounding mode just once at the start and end rather than doing it for every element in the vector. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-18-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 8 +++++ target/arm/translate-neon.inc.c | 61 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 31 +++-------------- 3 files changed, 74 insertions(+), 26 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm SHA1SU1 1111 001 11 . 11 .. 10 .... 0 0111 0 . 0 .... @2misc_q1 SHA256SU0 1111 001 11 . 11 .. 10 .... 0 0111 1 . 0 .... @2misc_q1 + VRINTN 1111 001 11 . 11 .. 10 .... 0 1000 . . 0 .... @2misc VRINTX 1111 001 11 . 11 .. 10 .... 0 1001 . . 0 .... @2misc + VRINTA 1111 001 11 . 11 .. 10 .... 0 1010 . . 0 .... @2misc + VRINTZ 1111 001 11 . 11 .. 10 .... 0 1011 . . 0 .... @2misc VCVT_F16_F32 1111 001 11 . 11 .. 10 .... 0 1100 0 . 0 .... @2misc_q0 + + VRINTM 1111 001 11 . 11 .. 10 .... 0 1101 . . 0 .... @2misc + VCVT_F32_F16 1111 001 11 . 11 .. 10 .... 0 1110 0 . 0 .... @2misc_q0 + VRINTP 1111 001 11 . 11 .. 10 .... 0 1111 . . 0 .... @2misc + VRECPE 1111 001 11 . 11 .. 11 .... 0 1000 . . 0 .... @2misc VRSQRTE 1111 001 11 . 11 .. 11 .... 0 1001 . . 0 .... @2misc VRECPE_F 1111 001 11 . 11 .. 11 .... 0 1010 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_FP_CMP0(VCGE0_F, gen_helper_neon_cge_f32, FWD) DO_FP_CMP0(VCEQ0_F, gen_helper_neon_ceq_f32, FWD) DO_FP_CMP0(VCLE0_F, gen_helper_neon_cge_f32, REV) DO_FP_CMP0(VCLT0_F, gen_helper_neon_cgt_f32, REV) + +static bool do_vrint(DisasContext *s, arg_2misc *a, int rmode) +{ + /* + * Handle a VRINT* operation by iterating 32 bits at a time, + * with a specified rounding mode in operation. + */ + int pass; + TCGv_ptr fpst; + TCGv_i32 tcg_rmode; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON) || + !arm_dc_feature(s, ARM_FEATURE_V8)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size != 2) { + /* TODO: FP16 will be the size == 1 case */ + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(1); + tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); + gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, cpu_env); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + gen_helper_rints(tmp, tmp, fpst); + neon_store_reg(a->vd, pass, tmp); + } + gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, cpu_env); + tcg_temp_free_i32(tcg_rmode); + tcg_temp_free_ptr(fpst); + + return true; +} + +#define DO_VRINT(INSN, RMODE) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_vrint(s, a, RMODE); \ + } + +DO_VRINT(VRINTN, FPROUNDING_TIEEVEN) +DO_VRINT(VRINTA, FPROUNDING_TIEAWAY) +DO_VRINT(VRINTZ, FPROUNDING_ZERO) +DO_VRINT(VRINTM, FPROUNDING_NEGINF) +DO_VRINT(VRINTP, FPROUNDING_POSINF) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VCEQ0_F: case NEON_2RM_VCLE0_F: case NEON_2RM_VCLT0_F: + case NEON_2RM_VRINTN: + case NEON_2RM_VRINTA: + case NEON_2RM_VRINTM: + case NEON_2RM_VRINTP: + case NEON_2RM_VRINTZ: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg(rm, pass, tmp2); break; - case NEON_2RM_VRINTN: - case NEON_2RM_VRINTA: - case NEON_2RM_VRINTM: - case NEON_2RM_VRINTP: - case NEON_2RM_VRINTZ: - { - TCGv_i32 tcg_rmode; - TCGv_ptr fpstatus = get_fpstatus_ptr(1); - int rmode; - - if (op == NEON_2RM_VRINTZ) { - rmode = FPROUNDING_ZERO; - } else { - rmode = fp_decode_rm[((op & 0x6) >> 1) ^ 1]; - } - - tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, - cpu_env); - gen_helper_rints(tmp, tmp, fpstatus); - gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, - cpu_env); - tcg_temp_free_ptr(fpstatus); - tcg_temp_free_i32(tcg_rmode); - break; - } case NEON_2RM_VCVTAU: case NEON_2RM_VCVTAS: case NEON_2RM_VCVTNU: -- 2.20.1 Convert the VCVT instructions in the 2-reg-misc grouping to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-19-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 9 +++++ target/arm/translate-neon.inc.c | 70 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 70 ++++----------------------------- 3 files changed, 87 insertions(+), 62 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VRINTP 1111 001 11 . 11 .. 10 .... 0 1111 . . 0 .... @2misc + VCVTAS 1111 001 11 . 11 .. 11 .... 0 0000 . . 0 .... @2misc + VCVTAU 1111 001 11 . 11 .. 11 .... 0 0001 . . 0 .... @2misc + VCVTNS 1111 001 11 . 11 .. 11 .... 0 0010 . . 0 .... @2misc + VCVTNU 1111 001 11 . 11 .. 11 .... 0 0011 . . 0 .... @2misc + VCVTPS 1111 001 11 . 11 .. 11 .... 0 0100 . . 0 .... @2misc + VCVTPU 1111 001 11 . 11 .. 11 .... 0 0101 . . 0 .... @2misc + VCVTMS 1111 001 11 . 11 .. 11 .... 0 0110 . . 0 .... @2misc + VCVTMU 1111 001 11 . 11 .. 11 .... 0 0111 . . 0 .... @2misc + VRECPE 1111 001 11 . 11 .. 11 .... 0 1000 . . 0 .... @2misc VRSQRTE 1111 001 11 . 11 .. 11 .... 0 1001 . . 0 .... @2misc VRECPE_F 1111 001 11 . 11 .. 11 .... 0 1010 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_VRINT(VRINTA, FPROUNDING_TIEAWAY) DO_VRINT(VRINTZ, FPROUNDING_ZERO) DO_VRINT(VRINTM, FPROUNDING_NEGINF) DO_VRINT(VRINTP, FPROUNDING_POSINF) + +static bool do_vcvt(DisasContext *s, arg_2misc *a, int rmode, bool is_signed) +{ + /* + * Handle a VCVT* operation by iterating 32 bits at a time, + * with a specified rounding mode in operation. + */ + int pass; + TCGv_ptr fpst; + TCGv_i32 tcg_rmode, tcg_shift; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON) || + !arm_dc_feature(s, ARM_FEATURE_V8)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size != 2) { + /* TODO: FP16 will be the size == 1 case */ + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpst = get_fpstatus_ptr(1); + tcg_shift = tcg_const_i32(0); + tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); + gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, cpu_env); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + if (is_signed) { + gen_helper_vfp_tosls(tmp, tmp, tcg_shift, fpst); + } else { + gen_helper_vfp_touls(tmp, tmp, tcg_shift, fpst); + } + neon_store_reg(a->vd, pass, tmp); + } + gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, cpu_env); + tcg_temp_free_i32(tcg_rmode); + tcg_temp_free_i32(tcg_shift); + tcg_temp_free_ptr(fpst); + + return true; +} + +#define DO_VCVT(INSN, RMODE, SIGNED) \ + static bool trans_##INSN(DisasContext *s, arg_2misc *a) \ + { \ + return do_vcvt(s, a, RMODE, SIGNED); \ + } + +DO_VCVT(VCVTAU, FPROUNDING_TIEAWAY, false) +DO_VCVT(VCVTAS, FPROUNDING_TIEAWAY, true) +DO_VCVT(VCVTNU, FPROUNDING_TIEEVEN, false) +DO_VCVT(VCVTNS, FPROUNDING_TIEEVEN, true) +DO_VCVT(VCVTPU, FPROUNDING_POSINF, false) +DO_VCVT(VCVTPS, FPROUNDING_POSINF, true) +DO_VCVT(VCVTMU, FPROUNDING_NEGINF, false) +DO_VCVT(VCVTMS, FPROUNDING_NEGINF, true) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) #define NEON_2RM_VCVT_SF 62 #define NEON_2RM_VCVT_UF 63 -static bool neon_2rm_is_v8_op(int op) -{ - /* Return true if this neon 2reg-misc op is ARMv8 and up */ - switch (op) { - case NEON_2RM_VRINTN: - case NEON_2RM_VRINTA: - case NEON_2RM_VRINTM: - case NEON_2RM_VRINTP: - case NEON_2RM_VRINTZ: - case NEON_2RM_VRINTX: - case NEON_2RM_VCVTAU: - case NEON_2RM_VCVTAS: - case NEON_2RM_VCVTNU: - case NEON_2RM_VCVTNS: - case NEON_2RM_VCVTPU: - case NEON_2RM_VCVTPS: - case NEON_2RM_VCVTMU: - case NEON_2RM_VCVTMS: - return true; - default: - return false; - } -} - /* Each entry in this array has bit n set if the insn allows * size value n (otherwise it will UNDEF). Since unallocated * op values will have no bits set they always UNDEF. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if ((neon_2rm_sizes[op] & (1 << size)) == 0) { return 1; } - if (neon_2rm_is_v8_op(op) && - !arm_dc_feature(s, ARM_FEATURE_V8)) { - return 1; - } if (q && ((rm | rd) & 1)) { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VRINTM: case NEON_2RM_VRINTP: case NEON_2RM_VRINTZ: + case NEON_2RM_VCVTAU: + case NEON_2RM_VCVTAS: + case NEON_2RM_VCVTNU: + case NEON_2RM_VCVTNS: + case NEON_2RM_VCVTPU: + case NEON_2RM_VCVTPS: + case NEON_2RM_VCVTMU: + case NEON_2RM_VCVTMS: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg(rm, pass, tmp2); break; - case NEON_2RM_VCVTAU: - case NEON_2RM_VCVTAS: - case NEON_2RM_VCVTNU: - case NEON_2RM_VCVTNS: - case NEON_2RM_VCVTPU: - case NEON_2RM_VCVTPS: - case NEON_2RM_VCVTMU: - case NEON_2RM_VCVTMS: - { - bool is_signed = !extract32(insn, 7, 1); - TCGv_ptr fpst = get_fpstatus_ptr(1); - TCGv_i32 tcg_rmode, tcg_shift; - int rmode = fp_decode_rm[extract32(insn, 8, 2)]; - - tcg_shift = tcg_const_i32(0); - tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, - cpu_env); - - if (is_signed) { - gen_helper_vfp_tosls(tmp, tmp, - tcg_shift, fpst); - } else { - gen_helper_vfp_touls(tmp, tmp, - tcg_shift, fpst); - } - - gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode, - cpu_env); - tcg_temp_free_i32(tcg_rmode); - tcg_temp_free_i32(tcg_shift); - tcg_temp_free_ptr(fpst); - break; - } default: /* Reserved op values were caught by the * neon_2rm_sizes[] check earlier. -- 2.20.1 Convert the Neon VSWP insn to decodetree. Since the new implementation doesn't have to share a pass-loop with the other 2-reg-misc operations we can implement the swap with 64-bit accesses rather than 32-bits (which brings us into line with the pseudocode and is more efficient). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-20-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 2 ++ target/arm/translate-neon.inc.c | 41 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 5 +--- 3 files changed, 44 insertions(+), 4 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VABS_F 1111 001 11 . 11 .. 01 .... 0 1110 . . 0 .... @2misc VNEG_F 1111 001 11 . 11 .. 01 .... 0 1111 . . 0 .... @2misc + VSWP 1111 001 11 . 11 .. 10 .... 0 0000 . . 0 .... @2misc + VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_VCVT(VCVTPU, FPROUNDING_POSINF, false) DO_VCVT(VCVTPS, FPROUNDING_POSINF, true) DO_VCVT(VCVTMU, FPROUNDING_NEGINF, false) DO_VCVT(VCVTMS, FPROUNDING_NEGINF, true) + +static bool trans_VSWP(DisasContext *s, arg_2misc *a) +{ + TCGv_i64 rm, rd; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->size != 0) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + rm = tcg_temp_new_i64(); + rd = tcg_temp_new_i64(); + for (pass = 0; pass < (a->q ? 2 : 1); pass++) { + neon_load_reg64(rm, a->vm + pass); + neon_load_reg64(rd, a->vd + pass); + neon_store_reg64(rm, a->vd + pass); + neon_store_reg64(rd, a->vm + pass); + } + tcg_temp_free_i64(rm); + tcg_temp_free_i64(rd); + + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case NEON_2RM_VCVTPS: case NEON_2RM_VCVTMU: case NEON_2RM_VCVTMS: + case NEON_2RM_VSWP: /* handled by decodetree */ return 1; case NEON_2RM_VTRN: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) for (pass = 0; pass < (q ? 4 : 2); pass++) { tmp = neon_load_reg(rm, pass); switch (op) { - case NEON_2RM_VSWP: - tmp2 = neon_load_reg(rd, pass); - neon_store_reg(rm, pass, tmp2); - break; case NEON_2RM_VTRN: tmp2 = neon_load_reg(rd, pass); switch (size) { -- 2.20.1 Convert the Neon VTRN insn to decodetree. This is the last insn in the Neon data-processing group, so we can remove all the now-unused old decoder framework. It's possible that there's a more efficient implementation of VTRN, but for this conversion we just copy the existing approach. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-21-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 2 +- target/arm/translate-neon.inc.c | 90 ++++++++ target/arm/translate.c | 363 +------------------------------- 3 files changed, 93 insertions(+), 362 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm VNEG_F 1111 001 11 . 11 .. 01 .... 0 1111 . . 0 .... @2misc VSWP 1111 001 11 . 11 .. 10 .... 0 0000 . . 0 .... @2misc - + VTRN 1111 001 11 . 11 .. 10 .... 0 0001 . . 0 .... @2misc VUZP 1111 001 11 . 11 .. 10 .... 0 0010 . . 0 .... @2misc VZIP 1111 001 11 . 11 .. 10 .... 0 0011 . . 0 .... @2misc diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSWP(DisasContext *s, arg_2misc *a) return true; } +static void gen_neon_trn_u8(TCGv_i32 t0, TCGv_i32 t1) +{ + TCGv_i32 rd, tmp; + + rd = tcg_temp_new_i32(); + tmp = tcg_temp_new_i32(); + + tcg_gen_shli_i32(rd, t0, 8); + tcg_gen_andi_i32(rd, rd, 0xff00ff00); + tcg_gen_andi_i32(tmp, t1, 0x00ff00ff); + tcg_gen_or_i32(rd, rd, tmp); + + tcg_gen_shri_i32(t1, t1, 8); + tcg_gen_andi_i32(t1, t1, 0x00ff00ff); + tcg_gen_andi_i32(tmp, t0, 0xff00ff00); + tcg_gen_or_i32(t1, t1, tmp); + tcg_gen_mov_i32(t0, rd); + + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(rd); +} + +static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) +{ + TCGv_i32 rd, tmp; + + rd = tcg_temp_new_i32(); + tmp = tcg_temp_new_i32(); + + tcg_gen_shli_i32(rd, t0, 16); + tcg_gen_andi_i32(tmp, t1, 0xffff); + tcg_gen_or_i32(rd, rd, tmp); + tcg_gen_shri_i32(t1, t1, 16); + tcg_gen_andi_i32(tmp, t0, 0xffff0000); + tcg_gen_or_i32(t1, t1, tmp); + tcg_gen_mov_i32(t0, rd); + + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(rd); +} + +static bool trans_VTRN(DisasContext *s, arg_2misc *a) +{ + TCGv_i32 tmp, tmp2; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vd | a->vm) & a->q) { + return false; + } + + if (a->size == 3) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + if (a->size == 2) { + for (pass = 0; pass < (a->q ? 4 : 2); pass += 2) { + tmp = neon_load_reg(a->vm, pass); + tmp2 = neon_load_reg(a->vd, pass + 1); + neon_store_reg(a->vm, pass, tmp2); + neon_store_reg(a->vd, pass + 1, tmp); + } + } else { + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + tmp = neon_load_reg(a->vm, pass); + tmp2 = neon_load_reg(a->vd, pass); + if (a->size == 0) { + gen_neon_trn_u8(tmp, tmp2); + } else { + gen_neon_trn_u16(tmp, tmp2); + } + neon_store_reg(a->vm, pass, tmp2); + neon_store_reg(a->vd, pass, tmp); + } + } + return true; +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc) gen_rfe(s, pc, load_cpu_field(spsr)); } -static void gen_neon_trn_u8(TCGv_i32 t0, TCGv_i32 t1) -{ - TCGv_i32 rd, tmp; - - rd = tcg_temp_new_i32(); - tmp = tcg_temp_new_i32(); - - tcg_gen_shli_i32(rd, t0, 8); - tcg_gen_andi_i32(rd, rd, 0xff00ff00); - tcg_gen_andi_i32(tmp, t1, 0x00ff00ff); - tcg_gen_or_i32(rd, rd, tmp); - - tcg_gen_shri_i32(t1, t1, 8); - tcg_gen_andi_i32(t1, t1, 0x00ff00ff); - tcg_gen_andi_i32(tmp, t0, 0xff00ff00); - tcg_gen_or_i32(t1, t1, tmp); - tcg_gen_mov_i32(t0, rd); - - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(rd); -} - -static void gen_neon_trn_u16(TCGv_i32 t0, TCGv_i32 t1) -{ - TCGv_i32 rd, tmp; - - rd = tcg_temp_new_i32(); - tmp = tcg_temp_new_i32(); - - tcg_gen_shli_i32(rd, t0, 16); - tcg_gen_andi_i32(tmp, t1, 0xffff); - tcg_gen_or_i32(rd, rd, tmp); - tcg_gen_shri_i32(t1, t1, 16); - tcg_gen_andi_i32(tmp, t0, 0xffff0000); - tcg_gen_or_i32(t1, t1, tmp); - tcg_gen_mov_i32(t0, rd); - - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(rd); -} - -/* Symbolic constants for op fields for Neon 2-register miscellaneous. - * The values correspond to bits [17:16,10:7]; see the ARM ARM DDI0406B - * table A7-13. - */ -#define NEON_2RM_VREV64 0 -#define NEON_2RM_VREV32 1 -#define NEON_2RM_VREV16 2 -#define NEON_2RM_VPADDL 4 -#define NEON_2RM_VPADDL_U 5 -#define NEON_2RM_AESE 6 /* Includes AESD */ -#define NEON_2RM_AESMC 7 /* Includes AESIMC */ -#define NEON_2RM_VCLS 8 -#define NEON_2RM_VCLZ 9 -#define NEON_2RM_VCNT 10 -#define NEON_2RM_VMVN 11 -#define NEON_2RM_VPADAL 12 -#define NEON_2RM_VPADAL_U 13 -#define NEON_2RM_VQABS 14 -#define NEON_2RM_VQNEG 15 -#define NEON_2RM_VCGT0 16 -#define NEON_2RM_VCGE0 17 -#define NEON_2RM_VCEQ0 18 -#define NEON_2RM_VCLE0 19 -#define NEON_2RM_VCLT0 20 -#define NEON_2RM_SHA1H 21 -#define NEON_2RM_VABS 22 -#define NEON_2RM_VNEG 23 -#define NEON_2RM_VCGT0_F 24 -#define NEON_2RM_VCGE0_F 25 -#define NEON_2RM_VCEQ0_F 26 -#define NEON_2RM_VCLE0_F 27 -#define NEON_2RM_VCLT0_F 28 -#define NEON_2RM_VABS_F 30 -#define NEON_2RM_VNEG_F 31 -#define NEON_2RM_VSWP 32 -#define NEON_2RM_VTRN 33 -#define NEON_2RM_VUZP 34 -#define NEON_2RM_VZIP 35 -#define NEON_2RM_VMOVN 36 /* Includes VQMOVN, VQMOVUN */ -#define NEON_2RM_VQMOVN 37 /* Includes VQMOVUN */ -#define NEON_2RM_VSHLL 38 -#define NEON_2RM_SHA1SU1 39 /* Includes SHA256SU0 */ -#define NEON_2RM_VRINTN 40 -#define NEON_2RM_VRINTX 41 -#define NEON_2RM_VRINTA 42 -#define NEON_2RM_VRINTZ 43 -#define NEON_2RM_VCVT_F16_F32 44 -#define NEON_2RM_VRINTM 45 -#define NEON_2RM_VCVT_F32_F16 46 -#define NEON_2RM_VRINTP 47 -#define NEON_2RM_VCVTAU 48 -#define NEON_2RM_VCVTAS 49 -#define NEON_2RM_VCVTNU 50 -#define NEON_2RM_VCVTNS 51 -#define NEON_2RM_VCVTPU 52 -#define NEON_2RM_VCVTPS 53 -#define NEON_2RM_VCVTMU 54 -#define NEON_2RM_VCVTMS 55 -#define NEON_2RM_VRECPE 56 -#define NEON_2RM_VRSQRTE 57 -#define NEON_2RM_VRECPE_F 58 -#define NEON_2RM_VRSQRTE_F 59 -#define NEON_2RM_VCVT_FS 60 -#define NEON_2RM_VCVT_FU 61 -#define NEON_2RM_VCVT_SF 62 -#define NEON_2RM_VCVT_UF 63 - -/* Each entry in this array has bit n set if the insn allows - * size value n (otherwise it will UNDEF). Since unallocated - * op values will have no bits set they always UNDEF. - */ -static const uint8_t neon_2rm_sizes[] = { - [NEON_2RM_VREV64] = 0x7, - [NEON_2RM_VREV32] = 0x3, - [NEON_2RM_VREV16] = 0x1, - [NEON_2RM_VPADDL] = 0x7, - [NEON_2RM_VPADDL_U] = 0x7, - [NEON_2RM_AESE] = 0x1, - [NEON_2RM_AESMC] = 0x1, - [NEON_2RM_VCLS] = 0x7, - [NEON_2RM_VCLZ] = 0x7, - [NEON_2RM_VCNT] = 0x1, - [NEON_2RM_VMVN] = 0x1, - [NEON_2RM_VPADAL] = 0x7, - [NEON_2RM_VPADAL_U] = 0x7, - [NEON_2RM_VQABS] = 0x7, - [NEON_2RM_VQNEG] = 0x7, - [NEON_2RM_VCGT0] = 0x7, - [NEON_2RM_VCGE0] = 0x7, - [NEON_2RM_VCEQ0] = 0x7, - [NEON_2RM_VCLE0] = 0x7, - [NEON_2RM_VCLT0] = 0x7, - [NEON_2RM_SHA1H] = 0x4, - [NEON_2RM_VABS] = 0x7, - [NEON_2RM_VNEG] = 0x7, - [NEON_2RM_VCGT0_F] = 0x4, - [NEON_2RM_VCGE0_F] = 0x4, - [NEON_2RM_VCEQ0_F] = 0x4, - [NEON_2RM_VCLE0_F] = 0x4, - [NEON_2RM_VCLT0_F] = 0x4, - [NEON_2RM_VABS_F] = 0x4, - [NEON_2RM_VNEG_F] = 0x4, - [NEON_2RM_VSWP] = 0x1, - [NEON_2RM_VTRN] = 0x7, - [NEON_2RM_VUZP] = 0x7, - [NEON_2RM_VZIP] = 0x7, - [NEON_2RM_VMOVN] = 0x7, - [NEON_2RM_VQMOVN] = 0x7, - [NEON_2RM_VSHLL] = 0x7, - [NEON_2RM_SHA1SU1] = 0x4, - [NEON_2RM_VRINTN] = 0x4, - [NEON_2RM_VRINTX] = 0x4, - [NEON_2RM_VRINTA] = 0x4, - [NEON_2RM_VRINTZ] = 0x4, - [NEON_2RM_VCVT_F16_F32] = 0x2, - [NEON_2RM_VRINTM] = 0x4, - [NEON_2RM_VCVT_F32_F16] = 0x2, - [NEON_2RM_VRINTP] = 0x4, - [NEON_2RM_VCVTAU] = 0x4, - [NEON_2RM_VCVTAS] = 0x4, - [NEON_2RM_VCVTNU] = 0x4, - [NEON_2RM_VCVTNS] = 0x4, - [NEON_2RM_VCVTPU] = 0x4, - [NEON_2RM_VCVTPS] = 0x4, - [NEON_2RM_VCVTMU] = 0x4, - [NEON_2RM_VCVTMS] = 0x4, - [NEON_2RM_VRECPE] = 0x4, - [NEON_2RM_VRSQRTE] = 0x4, - [NEON_2RM_VRECPE_F] = 0x4, - [NEON_2RM_VRSQRTE_F] = 0x4, - [NEON_2RM_VCVT_FS] = 0x4, - [NEON_2RM_VCVT_FU] = 0x4, - [NEON_2RM_VCVT_SF] = 0x4, - [NEON_2RM_VCVT_UF] = 0x4, -}; - static void gen_gvec_fn3_qc(uint32_t rd_ofs, uint32_t rn_ofs, uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz, gen_helper_gvec_3_ptr *fn) @@ -XXX,XX +XXX,XX @@ void gen_gvec_uaba(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz, &ops[vece]); } -/* Translate a NEON data processing instruction. Return nonzero if the - instruction is invalid. - We process data in a mixture of 32-bit and 64-bit chunks. - Mostly we use 32-bit chunks so we can use normal scalar instructions. */ - -static int disas_neon_data_insn(DisasContext *s, uint32_t insn) -{ - int op; - int q; - int rd, rm; - int size; - int pass; - int u; - TCGv_i32 tmp, tmp2; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { - return 1; - } - - /* FIXME: this access check should not take precedence over UNDEF - * for invalid encodings; we will generate incorrect syndrome information - * for attempts to execute invalid vfp/neon encodings with FP disabled. - */ - if (s->fp_excp_el) { - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_simd_access_trap(1, 0xe, false), s->fp_excp_el); - return 0; - } - - if (!s->vfp_enabled) - return 1; - q = (insn & (1 << 6)) != 0; - u = (insn >> 24) & 1; - VFP_DREG_D(rd, insn); - VFP_DREG_M(rm, insn); - size = (insn >> 20) & 3; - - if ((insn & (1 << 23)) == 0) { - /* Three register same length: handled by decodetree */ - return 1; - } else if (insn & (1 << 4)) { - /* Two registers and shift or reg and imm: handled by decodetree */ - return 1; - } else { /* (insn & 0x00800010 == 0x00800000) */ - if (size != 3) { - /* - * Three registers of different lengths, or two registers and - * a scalar: handled by decodetree - */ - return 1; - } else { /* size == 3 */ - if (!u) { - /* Extract: handled by decodetree */ - return 1; - } else if ((insn & (1 << 11)) == 0) { - /* Two register misc. */ - op = ((insn >> 12) & 0x30) | ((insn >> 7) & 0xf); - size = (insn >> 18) & 3; - /* UNDEF for unknown op values and bad op-size combinations */ - if ((neon_2rm_sizes[op] & (1 << size)) == 0) { - return 1; - } - if (q && ((rm | rd) & 1)) { - return 1; - } - switch (op) { - case NEON_2RM_VREV64: - case NEON_2RM_VPADDL: case NEON_2RM_VPADDL_U: - case NEON_2RM_VPADAL: case NEON_2RM_VPADAL_U: - case NEON_2RM_VUZP: - case NEON_2RM_VZIP: - case NEON_2RM_VMOVN: case NEON_2RM_VQMOVN: - case NEON_2RM_VSHLL: - case NEON_2RM_VCVT_F16_F32: - case NEON_2RM_VCVT_F32_F16: - case NEON_2RM_VMVN: - case NEON_2RM_VNEG: - case NEON_2RM_VABS: - case NEON_2RM_VCEQ0: - case NEON_2RM_VCGT0: - case NEON_2RM_VCLE0: - case NEON_2RM_VCGE0: - case NEON_2RM_VCLT0: - case NEON_2RM_AESE: case NEON_2RM_AESMC: - case NEON_2RM_SHA1H: - case NEON_2RM_SHA1SU1: - case NEON_2RM_VREV32: - case NEON_2RM_VREV16: - case NEON_2RM_VCLS: - case NEON_2RM_VCLZ: - case NEON_2RM_VCNT: - case NEON_2RM_VABS_F: - case NEON_2RM_VNEG_F: - case NEON_2RM_VRECPE: - case NEON_2RM_VRSQRTE: - case NEON_2RM_VQABS: - case NEON_2RM_VQNEG: - case NEON_2RM_VRECPE_F: - case NEON_2RM_VRSQRTE_F: - case NEON_2RM_VCVT_FS: - case NEON_2RM_VCVT_FU: - case NEON_2RM_VCVT_SF: - case NEON_2RM_VCVT_UF: - case NEON_2RM_VRINTX: - case NEON_2RM_VCGT0_F: - case NEON_2RM_VCGE0_F: - case NEON_2RM_VCEQ0_F: - case NEON_2RM_VCLE0_F: - case NEON_2RM_VCLT0_F: - case NEON_2RM_VRINTN: - case NEON_2RM_VRINTA: - case NEON_2RM_VRINTM: - case NEON_2RM_VRINTP: - case NEON_2RM_VRINTZ: - case NEON_2RM_VCVTAU: - case NEON_2RM_VCVTAS: - case NEON_2RM_VCVTNU: - case NEON_2RM_VCVTNS: - case NEON_2RM_VCVTPU: - case NEON_2RM_VCVTPS: - case NEON_2RM_VCVTMU: - case NEON_2RM_VCVTMS: - case NEON_2RM_VSWP: - /* handled by decodetree */ - return 1; - case NEON_2RM_VTRN: - if (size == 2) { - int n; - for (n = 0; n < (q ? 4 : 2); n += 2) { - tmp = neon_load_reg(rm, n); - tmp2 = neon_load_reg(rd, n + 1); - neon_store_reg(rm, n, tmp2); - neon_store_reg(rd, n + 1, tmp); - } - } else { - goto elementwise; - } - break; - - default: - elementwise: - for (pass = 0; pass < (q ? 4 : 2); pass++) { - tmp = neon_load_reg(rm, pass); - switch (op) { - case NEON_2RM_VTRN: - tmp2 = neon_load_reg(rd, pass); - switch (size) { - case 0: gen_neon_trn_u8(tmp, tmp2); break; - case 1: gen_neon_trn_u16(tmp, tmp2); break; - default: abort(); - } - neon_store_reg(rm, pass, tmp2); - break; - default: - /* Reserved op values were caught by the - * neon_2rm_sizes[] check earlier. - */ - abort(); - } - neon_store_reg(rd, pass, tmp); - } - break; - } - } else { - /* VTBL, VTBX, VDUP: handled by decodetree */ - return 1; - } - } - } - return 0; -} - static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } /* fall back to legacy decoder */ - if (((insn >> 25) & 7) == 1) { - /* NEON Data processing. */ - if (disas_neon_data_insn(s, insn)) { - goto illegal_op; - } - return; - } if ((insn & 0x0e000f00) == 0x0c000100) { if (arm_dc_feature(s, ARM_FEATURE_IWMMXT)) { /* iWMMXt register transfer. */ @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) break; } if (((insn >> 24) & 3) == 3) { - /* Translate into the equivalent ARM encoding. */ - insn = (insn & 0xe2ffffff) | ((insn & (1 << 28)) >> 4) | (1 << 28); - if (disas_neon_data_insn(s, insn)) { - goto illegal_op; - } + /* Neon DP, but failed disas_neon_dp() */ + goto illegal_op; } else if (((insn >> 8) & 0xe) == 10) { /* VFP, but failed disas_vfp. */ goto illegal_op; -- 2.20.1 The functions neon_element_offset(), neon_load_element(), neon_load_element64(), neon_store_element() and neon_store_element64() are used only in the translate-neon.inc.c file, so move their definitions there. Since the .inc.c file is #included in translate.c this doesn't make much difference currently, but it's a more logical place to put the functions and it might be helpful if we ever decide to try to make the .inc.c files genuinely separate compilation units. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200616170844.13318-22-peter.maydell@linaro.org --- target/arm/translate-neon.inc.c | 101 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 101 -------------------------------- 2 files changed, 101 insertions(+), 101 deletions(-) diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static inline int rsub_8(DisasContext *s, int x) #include "decode-neon-ls.inc.c" #include "decode-neon-shared.inc.c" +/* Return the offset of a 2**SIZE piece of a NEON register, at index ELE, + * where 0 is the least significant end of the register. + */ +static inline long +neon_element_offset(int reg, int element, MemOp size) +{ + int element_size = 1 << size; + int ofs = element * element_size; +#ifdef HOST_WORDS_BIGENDIAN + /* Calculate the offset assuming fully little-endian, + * then XOR to account for the order of the 8-byte units. + */ + if (element_size < 8) { + ofs ^= 8 - element_size; + } +#endif + return neon_reg_offset(reg, 0) + ofs; +} + +static void neon_load_element(TCGv_i32 var, int reg, int ele, MemOp mop) +{ + long offset = neon_element_offset(reg, ele, mop & MO_SIZE); + + switch (mop) { + case MO_UB: + tcg_gen_ld8u_i32(var, cpu_env, offset); + break; + case MO_UW: + tcg_gen_ld16u_i32(var, cpu_env, offset); + break; + case MO_UL: + tcg_gen_ld_i32(var, cpu_env, offset); + break; + default: + g_assert_not_reached(); + } +} + +static void neon_load_element64(TCGv_i64 var, int reg, int ele, MemOp mop) +{ + long offset = neon_element_offset(reg, ele, mop & MO_SIZE); + + switch (mop) { + case MO_UB: + tcg_gen_ld8u_i64(var, cpu_env, offset); + break; + case MO_UW: + tcg_gen_ld16u_i64(var, cpu_env, offset); + break; + case MO_UL: + tcg_gen_ld32u_i64(var, cpu_env, offset); + break; + case MO_Q: + tcg_gen_ld_i64(var, cpu_env, offset); + break; + default: + g_assert_not_reached(); + } +} + +static void neon_store_element(int reg, int ele, MemOp size, TCGv_i32 var) +{ + long offset = neon_element_offset(reg, ele, size); + + switch (size) { + case MO_8: + tcg_gen_st8_i32(var, cpu_env, offset); + break; + case MO_16: + tcg_gen_st16_i32(var, cpu_env, offset); + break; + case MO_32: + tcg_gen_st_i32(var, cpu_env, offset); + break; + default: + g_assert_not_reached(); + } +} + +static void neon_store_element64(int reg, int ele, MemOp size, TCGv_i64 var) +{ + long offset = neon_element_offset(reg, ele, size); + + switch (size) { + case MO_8: + tcg_gen_st8_i64(var, cpu_env, offset); + break; + case MO_16: + tcg_gen_st16_i64(var, cpu_env, offset); + break; + case MO_32: + tcg_gen_st32_i64(var, cpu_env, offset); + break; + case MO_64: + tcg_gen_st_i64(var, cpu_env, offset); + break; + default: + g_assert_not_reached(); + } +} + static bool trans_VCMLA(DisasContext *s, arg_VCMLA *a) { int opr_sz; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ neon_reg_offset (int reg, int n) return vfp_reg_offset(0, sreg); } -/* Return the offset of a 2**SIZE piece of a NEON register, at index ELE, - * where 0 is the least significant end of the register. - */ -static inline long -neon_element_offset(int reg, int element, MemOp size) -{ - int element_size = 1 << size; - int ofs = element * element_size; -#ifdef HOST_WORDS_BIGENDIAN - /* Calculate the offset assuming fully little-endian, - * then XOR to account for the order of the 8-byte units. - */ - if (element_size < 8) { - ofs ^= 8 - element_size; - } -#endif - return neon_reg_offset(reg, 0) + ofs; -} - static TCGv_i32 neon_load_reg(int reg, int pass) { TCGv_i32 tmp = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static TCGv_i32 neon_load_reg(int reg, int pass) return tmp; } -static void neon_load_element(TCGv_i32 var, int reg, int ele, MemOp mop) -{ - long offset = neon_element_offset(reg, ele, mop & MO_SIZE); - - switch (mop) { - case MO_UB: - tcg_gen_ld8u_i32(var, cpu_env, offset); - break; - case MO_UW: - tcg_gen_ld16u_i32(var, cpu_env, offset); - break; - case MO_UL: - tcg_gen_ld_i32(var, cpu_env, offset); - break; - default: - g_assert_not_reached(); - } -} - -static void neon_load_element64(TCGv_i64 var, int reg, int ele, MemOp mop) -{ - long offset = neon_element_offset(reg, ele, mop & MO_SIZE); - - switch (mop) { - case MO_UB: - tcg_gen_ld8u_i64(var, cpu_env, offset); - break; - case MO_UW: - tcg_gen_ld16u_i64(var, cpu_env, offset); - break; - case MO_UL: - tcg_gen_ld32u_i64(var, cpu_env, offset); - break; - case MO_Q: - tcg_gen_ld_i64(var, cpu_env, offset); - break; - default: - g_assert_not_reached(); - } -} - static void neon_store_reg(int reg, int pass, TCGv_i32 var) { tcg_gen_st_i32(var, cpu_env, neon_reg_offset(reg, pass)); tcg_temp_free_i32(var); } -static void neon_store_element(int reg, int ele, MemOp size, TCGv_i32 var) -{ - long offset = neon_element_offset(reg, ele, size); - - switch (size) { - case MO_8: - tcg_gen_st8_i32(var, cpu_env, offset); - break; - case MO_16: - tcg_gen_st16_i32(var, cpu_env, offset); - break; - case MO_32: - tcg_gen_st_i32(var, cpu_env, offset); - break; - default: - g_assert_not_reached(); - } -} - -static void neon_store_element64(int reg, int ele, MemOp size, TCGv_i64 var) -{ - long offset = neon_element_offset(reg, ele, size); - - switch (size) { - case MO_8: - tcg_gen_st8_i64(var, cpu_env, offset); - break; - case MO_16: - tcg_gen_st16_i64(var, cpu_env, offset); - break; - case MO_32: - tcg_gen_st32_i64(var, cpu_env, offset); - break; - case MO_64: - tcg_gen_st_i64(var, cpu_env, offset); - break; - default: - g_assert_not_reached(); - } -} - static inline void neon_load_reg64(TCGv_i64 var, int reg) { tcg_gen_ld_i64(var, cpu_env, vfp_reg_offset(1, reg)); -- 2.20.1 Since commit ba3e7926691ed3 it has been unnecessary for target code to call gen_io_end() after an IO instruction in icount mode; it is sufficient to call gen_io_start() before it and to force the end of the TB. Many now-unnecessary calls to gen_io_end() were removed in commit 9e9b10c6491153b, but some were missed or accidentally added later. Remove unneeded calls from the arm target: * the call in the handling of exception-return-via-LDM is unnecessary, and the code is already forcing end-of-TB * the call in the VFP access check code is more complicated: we weren't ending the TB, so we need to add the code to force that by setting DISAS_UPDATE * the doc comment for ARM_CP_IO doesn't need to mention gen_io_end() any more Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-id: 20200619170324.12093-1-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- target/arm/translate-vfp.inc.c | 7 +++---- target/arm/translate.c | 3 --- 3 files changed, 4 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) * migration or KVM state synchronization. (Typically this is for "registers" * which are actually used as instructions for cache maintenance and so on.) * IO indicates that this register does I/O and therefore its accesses - * need to be surrounded by gen_io_start()/gen_io_end(). In particular, + * need to be marked with gen_io_start() and also end the TB. In particular, * registers which implement clocks or timers require this. * RAISES_EXC is for when the read or write hook might raise an exception; * the generated code will synchronize the CPU state before calling the hook diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool full_vfp_access_check(DisasContext *s, bool ignore_vfp_enabled) if (s->v7m_lspact) { /* * Lazy state saving affects external memory and also the NVIC, - * so we must mark it as an IO operation for icount. + * so we must mark it as an IO operation for icount (and cause + * this to be the last insn in the TB). */ if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + s->base.is_jmp = DISAS_UPDATE; gen_io_start(); } gen_helper_v7m_preserve_fp_state(cpu_env); - if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { - gen_io_end(); - } /* * If the preserve_fp_state helper doesn't throw an exception * then it will clear LSPACT; we don't need to repeat this for diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) gen_io_start(); } gen_helper_cpsr_write_eret(cpu_env, tmp); - if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { - gen_io_end(); - } tcg_temp_free_i32(tmp); /* Must exit loop to check un-masked IRQs */ s->base.is_jmp = DISAS_EXIT; -- 2.20.1 In commit cfdb2c0c95ae9205b0 ("target/arm: Vectorize SABA/UABA") we replaced the old handling of SABA/UABA with a vectorized implementation which returns early rather than falling into the loop-ever-elements code. We forgot to delete the part of the old looping code that did the accumulate step, and Coverity correctly warns (CID 1428955) that this code is now dead. Delete it. Fixes: cfdb2c0c95ae9205b0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200619171547.29780-1-peter.maydell@linaro.org --- target/arm/translate-a64.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn) genfn(tcg_res, tcg_op1, tcg_op2); } - if (opcode == 0xf) { - /* SABA, UABA: accumulating ops */ - static NeonGenTwoOpFn * const fns[3] = { - gen_helper_neon_add_u8, - gen_helper_neon_add_u16, - tcg_gen_add_i32, - }; - - read_vec_element_i32(s, tcg_op1, rd, pass, MO_32); - fns[size](tcg_res, tcg_op1, tcg_res); - } - write_vec_element_i32(s, tcg_res, rd, pass, MO_32); tcg_temp_free_i32(tcg_res); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add a trace event to see when a guest disable/enable the watchdog. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/watchdog/cmsdk-apb-watchdog.c | 1 + hw/watchdog/trace-events | 1 + 2 files changed, 2 insertions(+) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_write(void *opaque, hwaddr offset, break; case A_WDOGLOCK: s->lock = (value != WDOG_UNLOCK_VALUE); + trace_cmsdk_apb_watchdog_lock(s->lock); break; case A_WDOGITCR: if (s->is_luminary) { diff --git a/hw/watchdog/trace-events b/hw/watchdog/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/trace-events +++ b/hw/watchdog/trace-events @@ -XXX,XX +XXX,XX @@ cmsdk_apb_watchdog_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB watchdog read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_watchdog_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB watchdog write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_watchdog_reset(void) "CMSDK APB watchdog: reset" +cmsdk_apb_watchdog_lock(uint32_t lock) "CMSDK APB watchdog: lock %" PRIu32 -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Use self-explicit definitions instead of magic values. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/versatile_i2c.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/hw/i2c/versatile_i2c.c b/hw/i2c/versatile_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/versatile_i2c.c +++ b/hw/i2c/versatile_i2c.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "hw/i2c/bitbang_i2c.h" +#include "hw/registerfields.h" #include "qemu/log.h" #include "qemu/module.h" @@ -XXX,XX +XXX,XX @@ typedef struct VersatileI2CState { int in; } VersatileI2CState; +REG32(CONTROL_GET, 0) +REG32(CONTROL_SET, 0) +REG32(CONTROL_CLR, 4) + static uint64_t versatile_i2c_read(void *opaque, hwaddr offset, unsigned size) { VersatileI2CState *s = (VersatileI2CState *)opaque; - if (offset == 0) { + switch (offset) { + case A_CONTROL_SET: return (s->out & 1) | (s->in << 1); - } else { + default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%x\n", __func__, (int)offset); return -1; @@ -XXX,XX +XXX,XX @@ static void versatile_i2c_write(void *opaque, hwaddr offset, VersatileI2CState *s = (VersatileI2CState *)opaque; switch (offset) { - case 0: + case A_CONTROL_SET: s->out |= value & 3; break; - case 4: + case A_CONTROL_CLR: s->out &= ~value; break; default: -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Use self-explicit definitions instead of magic values. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-4-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/versatile_i2c.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/hw/i2c/versatile_i2c.c b/hw/i2c/versatile_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/versatile_i2c.c +++ b/hw/i2c/versatile_i2c.c @@ -XXX,XX +XXX,XX @@ REG32(CONTROL_GET, 0) REG32(CONTROL_SET, 0) REG32(CONTROL_CLR, 4) +#define SCL BIT(0) +#define SDA BIT(1) + static uint64_t versatile_i2c_read(void *opaque, hwaddr offset, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void versatile_i2c_write(void *opaque, hwaddr offset, qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%x\n", __func__, (int)offset); } - bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0); - s->in = bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0); + bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SCL, (s->out & SCL) != 0); + s->in = bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SDA, (s->out & SDA) != 0); } static const MemoryRegionOps versatile_i2c_ops = { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> 'ARM SBCon two-wire serial bus interface' is the official name describing the pair of registers used to bitbanging I2C in the Versatile boards. Make the private VersatileI2CState structure as public ArmSbconI2CState. Add the TYPE_ARM_SBCON_I2C, alias to our current TYPE_VERSATILE_I2C model. Rename the memory region description as 'arm_sbcon_i2c'. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-5-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/arm_sbcon_i2c.h | 35 ++++++++++++++++++++++++++++++++++ hw/i2c/versatile_i2c.c | 17 +++++------------ MAINTAINERS | 1 + 3 files changed, 41 insertions(+), 12 deletions(-) create mode 100644 include/hw/i2c/arm_sbcon_i2c.h diff --git a/include/hw/i2c/arm_sbcon_i2c.h b/include/hw/i2c/arm_sbcon_i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/arm_sbcon_i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM SBCon two-wire serial bus interface (I2C bitbang) + * a.k.a. + * ARM Versatile I2C controller + * + * Copyright (c) 2006-2007 CodeSourcery. + * Copyright (c) 2012 Oskar Andero <oskar.andero@gmail.com> + * Copyright (C) 2020 Philippe Mathieu-Daudé <f4bug@amsat.org> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ +#ifndef HW_I2C_ARM_SBCON_H +#define HW_I2C_ARM_SBCON_H + +#include "hw/sysbus.h" +#include "hw/i2c/bitbang_i2c.h" + +#define TYPE_VERSATILE_I2C "versatile_i2c" +#define TYPE_ARM_SBCON_I2C TYPE_VERSATILE_I2C + +#define ARM_SBCON_I2C(obj) \ + OBJECT_CHECK(ArmSbconI2CState, (obj), TYPE_ARM_SBCON_I2C) + +typedef struct ArmSbconI2CState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion iomem; + bitbang_i2c_interface bitbang; + int out; + int in; +} ArmSbconI2CState; + +#endif /* HW_I2C_ARM_SBCON_H */ diff --git a/hw/i2c/versatile_i2c.c b/hw/i2c/versatile_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/versatile_i2c.c +++ b/hw/i2c/versatile_i2c.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Versatile I2C controller + * ARM SBCon two-wire serial bus interface (I2C bitbang) + * a.k.a. ARM Versatile I2C controller * * Copyright (c) 2006-2007 CodeSourcery. * Copyright (c) 2012 Oskar Andero <oskar.andero@gmail.com> @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/sysbus.h" -#include "hw/i2c/bitbang_i2c.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/registerfields.h" #include "qemu/log.h" #include "qemu/module.h" -#define TYPE_VERSATILE_I2C "versatile_i2c" #define VERSATILE_I2C(obj) \ OBJECT_CHECK(VersatileI2CState, (obj), TYPE_VERSATILE_I2C) -typedef struct VersatileI2CState { - SysBusDevice parent_obj; +typedef ArmSbconI2CState VersatileI2CState; - MemoryRegion iomem; - bitbang_i2c_interface bitbang; - int out; - int in; -} VersatileI2CState; REG32(CONTROL_GET, 0) REG32(CONTROL_SET, 0) @@ -XXX,XX +XXX,XX @@ static void versatile_i2c_init(Object *obj) bus = i2c_init_bus(dev, "i2c"); bitbang_i2c_init(&s->bitbang, bus); memory_region_init_io(&s->iomem, obj, &versatile_i2c_ops, s, - "versatile_i2c", 0x1000); + "arm_sbcon_i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); } diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/versatile* +F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c F: docs/system/arm/versatile.rst -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> By using the TYPE_* definitions for devices, we can: - quickly find where devices are used with 'git-grep' - easily rename a device (one-line change). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-6-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/realview.c | 3 ++- hw/arm/versatilepb.c | 3 ++- hw/arm/vexpress.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a9mpcore.h" #include "hw/intc/realview_gic.h" #include "hw/irq.h" +#include "hw/i2c/arm_sbcon_i2c.h" #define SMP_BOOT_ADDR 0xe0000000 #define SMP_BOOTREG_ADDR 0x10000030 @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, } } - dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL); + dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); i2c_create_slave(i2c, "ds1338", 0x68); diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/pci/pci.h" #include "hw/i2c/i2c.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/irq.h" #include "hw/boards.h" #include "exec/address-spaces.h" @@ -XXX,XX +XXX,XX @@ static void versatile_init(MachineState *machine, int board_id) /* Add PL031 Real Time Clock. */ sysbus_create_simple("pl031", 0x101e8000, pic[10]); - dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL); + dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); i2c_create_slave(i2c, "ds1338", 0x68); diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/pl011.h" #include "hw/cpu/a9mpcore.h" #include "hw/cpu/a15mpcore.h" +#include "hw/i2c/arm_sbcon_i2c.h" #define VEXPRESS_BOARD_ID 0x8e0 #define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024) @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]); sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]); - dev = sysbus_create_simple("versatile_i2c", map[VE_SERIALDVI], NULL); + dev = sysbus_create_simple(TYPE_VERSATILE_I2C, map[VE_SERIALDVI], NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); i2c_create_slave(i2c, "sii9022", 0x39); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ typedef struct { MemoryRegion blockram_m2; MemoryRegion blockram_m3; MemoryRegion sram; + /* FPGA APB subsystem */ MPS2SCC scc; + /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; } MPS2MachineState; @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) g_assert_not_reached(); } + /* CMSDK APB subsystem */ cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); - object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) qdev_get_gpio_in(armv7m, 10)); sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); + /* FPGA APB subsystem */ object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); sccdev = DEVICE(&mms->scc); qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To differenciate with the CMSDK APB peripheral region, rename this region 'CMSDK AHB peripheral region'. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) */ create_unimplemented_device("CMSDK APB peripheral region @0x40000000", 0x40000000, 0x00010000); - create_unimplemented_device("CMSDK peripheral region @0x40010000", + create_unimplemented_device("CMSDK AHB peripheral region @0x40010000", 0x40010000, 0x00010000); create_unimplemented_device("Extra peripheral region @0x40020000", 0x40020000, 0x00010000); + create_unimplemented_device("RESERVED 4", 0x40030000, 0x001D0000); create_unimplemented_device("VGA", 0x41000000, 0x0200000); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> We already model the CMSDK APB watchdog device, let's use it! Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-9-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 7 +++++++ hw/arm/Kconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); + object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, + TYPE_CMSDK_APB_WATCHDOG); + qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, + qdev_get_gpio_in_named(armv7m, "NMI", 0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0x40008000); /* FPGA APB subsystem */ object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MPS2 select PL080 # DMA controller select SPLIT_IRQ select UNIMP + select CMSDK_APB_WATCHDOG config FSL_IMX7 bool -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Register the GPIO peripherals as unimplemented to better follow their accesses, for example booting Zephyr: ---------------- IN: arm_mps2_pinmux_init 0x00001160: f64f 0231 movw r2, #0xf831 0x00001164: 4b06 ldr r3, [pc, #0x18] 0x00001166: 2000 movs r0, #0 0x00001168: 619a str r2, [r3, #0x18] 0x0000116a: f24c 426f movw r2, #0xc46f 0x0000116e: f503 5380 add.w r3, r3, #0x1000 0x00001172: 619a str r2, [r3, #0x18] 0x00001174: f44f 529e mov.w r2, #0x13c0 0x00001178: f503 5380 add.w r3, r3, #0x1000 0x0000117c: 619a str r2, [r3, #0x18] 0x0000117e: 4770 bx lr cmsdk-ahb-gpio: unimplemented device write (size 4, value 0xf831, offset 0x18) cmsdk-ahb-gpio: unimplemented device write (size 4, value 0xc46f, offset 0x18) cmsdk-ahb-gpio: unimplemented device write (size 4, value 0x13c0, offset 0x18) Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) MemoryRegion *system_memory = get_system_memory(); MachineClass *mc = MACHINE_GET_CLASS(machine); DeviceState *armv7m, *sccdev; + int i; if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { error_report("This board can only be used with CPU %s", @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) */ Object *orgate; DeviceState *orgate_dev; - int i; orgate = object_new(TYPE_OR_IRQ); object_property_set_int(orgate, 6, "num-lines", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) */ Object *orgate; DeviceState *orgate_dev; - int i; orgate = object_new(TYPE_OR_IRQ); object_property_set_int(orgate, 10, "num-lines", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) default: g_assert_not_reached(); } + for (i = 0; i < 4; i++) { + static const hwaddr gpiobase[] = {0x40010000, 0x40011000, + 0x40012000, 0x40013000}; + create_unimplemented_device("cmsdk-ahb-gpio", gpiobase[i], 0x1000); + } /* CMSDK APB subsystem */ cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-11-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" #include "hw/net/lan9118.h" #include "net/net.h" +#include "hw/watchdog/cmsdk-apb-watchdog.h" typedef enum MPS2FPGAType { FPGA_AN385, @@ -XXX,XX +XXX,XX @@ typedef struct { MemoryRegion sram; /* FPGA APB subsystem */ MPS2SCC scc; + MPS2FPGAIO fpgaio; /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; + CMSDKAPBWatchdog watchdog; } MPS2MachineState; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id); sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(sccdev), 0, 0x4002f000); + object_initialize_child(OBJECT(mms), "fpgaio", + &mms->fpgaio, TYPE_MPS2_FPGAIO); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", 25000000); + sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0x40028000); /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> From 'Application Note AN385', chapter 3.9, SPI: The SMM implements five PL022 SPI modules. Two pairs of modules share the same OR-gated IRQ. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-12-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 24 ++++++++++++++++++++++++ hw/arm/Kconfig | 6 +++--- 2 files changed, 27 insertions(+), 3 deletions(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" #include "hw/misc/mps2-fpgaio.h" +#include "hw/ssi/pl022.h" #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", 25000000); sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0x40028000); + sysbus_create_simple(TYPE_PL022, 0x40025000, /* External ADC */ + qdev_get_gpio_in(armv7m, 22)); + for (i = 0; i < 2; i++) { + static const int spi_irqno[] = {11, 24}; + static const hwaddr spibase[] = {0x40020000, /* APB */ + 0x40021000, /* LCD */ + 0x40026000, /* Shield0 */ + 0x40027000}; /* Shield1 */ + DeviceState *orgate_dev; + Object *orgate; + int j; + + orgate = object_new(TYPE_OR_IRQ); + object_property_set_int(orgate, 2, "num-lines", &error_fatal); + orgate_dev = DEVICE(orgate); + qdev_realize(orgate_dev, NULL, &error_fatal); + qdev_connect_gpio_out(orgate_dev, 0, + qdev_get_gpio_in(armv7m, spi_irqno[i])); + for (j = 0; j < 2; j++) { + sysbus_create_simple(TYPE_PL022, spibase[2 * i + j], + qdev_get_gpio_in(orgate_dev, j)); + } + } /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config HIGHBANK select ARM_TIMER # sp804 select ARM_V7M select PL011 # UART - select PL022 # Serial port + select PL022 # SPI select PL031 # RTC select PL061 # GPIO select PL310 # cache controller @@ -XXX,XX +XXX,XX @@ config STELLARIS select CMSDK_APB_WATCHDOG select I2C select PL011 # UART - select PL022 # Serial port + select PL022 # SPI select PL061 # GPIO select SSD0303 # OLED display select SSD0323 # OLED display @@ -XXX,XX +XXX,XX @@ config MPS2 select MPS2_FPGAIO select MPS2_SCC select OR_IRQ - select PL022 # Serial port + select PL022 # SPI select PL080 # DMA controller select SPLIT_IRQ select UNIMP -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> From 'Application Note AN385', chapter 3.14: The SMM implements a simple SBCon interface based on I2C. There are 4 SBCon interfaces on the FPGA APB subsystem. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-13-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 8 ++++++++ hw/arm/Kconfig | 1 + 2 files changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mps2-scc.h" #include "hw/misc/mps2-fpgaio.h" #include "hw/ssi/pl022.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) qdev_get_gpio_in(orgate_dev, j)); } } + for (i = 0; i < 4; i++) { + static const hwaddr i2cbase[] = {0x40022000, /* Touch */ + 0x40023000, /* Audio */ + 0x40029000, /* Shield0 */ + 0x4002a000}; /* Shield1 */ + sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL); + } /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MPS2 select SPLIT_IRQ select UNIMP select CMSDK_APB_WATCHDOG + select VERSATILE_I2C config FSL_IMX7 bool -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-14-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) 0x4002a000}; /* Shield1 */ sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL); } + create_unimplemented_device("i2s", 0x40024000, 0x400); /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> From 'Application Note AN521', chapter 4.7: The SMM implements four SBCon serial modules: One SBCon module for use by the Color LCD touch interface. One SBCon module to configure the audio controller. Two general purpose SBCon modules, that connect to the Expansion headers J7 and J8, are intended for use with the V2C-Shield1 which provide an I2C interface on the headers. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-15-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2-tz.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ typedef struct { TZPPC ppc[5]; TZMPC ssram_mpc[3]; PL022State spi[5]; - UnimplementedDeviceState i2c[4]; + ArmSbconI2CState i2c[4]; UnimplementedDeviceState i2s_audio; UnimplementedDeviceState gpio[4]; UnimplementedDeviceState gfx; @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque, return sysbus_mmio_get_region(s, 0); } +static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + ArmSbconI2CState *i2c = opaque; + SysBusDevice *s; + + object_initialize_child(OBJECT(mms), name, i2c, TYPE_ARM_SBCON_I2C); + s = SYS_BUS_DEVICE(i2c); + sysbus_realize(s, &error_fatal); + return sysbus_mmio_get_region(s, 0); +} + static void mps2tz_common_init(MachineState *machine) { MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) { "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000 }, { "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000 }, { "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000 }, - { "i2c0", make_unimp_dev, &mms->i2c[0], 0x40207000, 0x1000 }, - { "i2c1", make_unimp_dev, &mms->i2c[1], 0x40208000, 0x1000 }, - { "i2c2", make_unimp_dev, &mms->i2c[2], 0x4020c000, 0x1000 }, - { "i2c3", make_unimp_dev, &mms->i2c[3], 0x4020d000, 0x1000 }, + { "i2c0", make_i2c, &mms->i2c[0], 0x40207000, 0x1000 }, + { "i2c1", make_i2c, &mms->i2c[1], 0x40208000, 0x1000 }, + { "i2c2", make_i2c, &mms->i2c[2], 0x4020c000, 0x1000 }, + { "i2c3", make_i2c, &mms->i2c[3], 0x4020d000, 0x1000 }, }, }, { .name = "apb_ppcexp2", -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since commit d70c996df23f, when enabling the PMU we get: $ qemu-system-aarch64 -cpu host,pmu=on -M virt,accel=kvm,gic-version=3 Segmentation fault (core dumped) Thread 1 "qemu-system-aar" received signal SIGSEGV, Segmentation fault. 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588 2588 ret = ioctl(s->fd, type, arg); (gdb) bt #0 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588 #1 0x0000aaaaaae31568 in kvm_check_extension (s=0x0, extension=126) at accel/kvm/kvm-all.c:916 #2 0x0000aaaaaafce254 in kvm_arm_pmu_supported (cpu=0xaaaaac214ab0) at target/arm/kvm.c:213 #3 0x0000aaaaaafc0f94 in arm_set_pmu (obj=0xaaaaac214ab0, value=true, errp=0xffffffffe438) at target/arm/cpu.c:1111 #4 0x0000aaaaab5533ac in property_set_bool (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", opaque=0xaaaaac222730, errp=0xffffffffe438) at qom/object.c:2170 #5 0x0000aaaaab5512f0 in object_property_set (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1328 #6 0x0000aaaaab551e10 in object_property_parse (obj=0xaaaaac214ab0, string=0xaaaaac11b4c0 "on", name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1561 #7 0x0000aaaaab54ee8c in object_apply_global_props (obj=0xaaaaac214ab0, props=0xaaaaac018e20, errp=0xaaaaabd6fd88 <error_fatal>) at qom/object.c:407 #8 0x0000aaaaab1dd5a4 in qdev_prop_set_globals (dev=0xaaaaac214ab0) at hw/core/qdev-properties.c:1218 #9 0x0000aaaaab1d9fac in device_post_init (obj=0xaaaaac214ab0) at hw/core/qdev.c:1050 ... #15 0x0000aaaaab54f310 in object_initialize_with_type (obj=0xaaaaac214ab0, size=52208, type=0xaaaaabe237f0) at qom/object.c:512 #16 0x0000aaaaab54fa24 in object_new_with_type (type=0xaaaaabe237f0) at qom/object.c:687 #17 0x0000aaaaab54fa80 in object_new (typename=0xaaaaabe23970 "host-arm-cpu") at qom/object.c:702 #18 0x0000aaaaaaf04a74 in machvirt_init (machine=0xaaaaac0a8550) at hw/arm/virt.c:1770 #19 0x0000aaaaab1e8720 in machine_run_board_init (machine=0xaaaaac0a8550) at hw/core/machine.c:1138 #20 0x0000aaaaaaf95394 in qemu_init (argc=5, argv=0xffffffffea58, envp=0xffffffffea88) at softmmu/vl.c:4348 #21 0x0000aaaaaada3f74 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at softmmu/main.c:48 This is because in frame #2, cpu->kvm_state is still NULL (the vCPU is not yet realized). KVM has a hard requirement of all cores supporting the same feature set. We only need to check if the accelerator supports a feature, not each vCPU individually. Fix by removing the 'CPUState *cpu' argument from the kvm_arm_<FEATURE>_supported() functions. Fixes: d70c996df23f ('Use CPUState::kvm_state in kvm_arm_pmu_supported') Reported-by: Haibo Xu <haibo.xu@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 21 +++++++++------------ target/arm/cpu.c | 2 +- target/arm/cpu64.c | 10 +++++----- target/arm/kvm.c | 4 ++-- target/arm/kvm64.c | 14 +++++--------- 5 files changed, 22 insertions(+), 29 deletions(-) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ void kvm_arm_add_vcpu_properties(Object *obj); /** * kvm_arm_aarch32_supported: - * @cs: CPUState * - * Returns: true if the KVM VCPU can enable AArch32 mode + * Returns: true if KVM can enable AArch32 mode * and false otherwise. */ -bool kvm_arm_aarch32_supported(CPUState *cs); +bool kvm_arm_aarch32_supported(void); /** * kvm_arm_pmu_supported: - * @cs: CPUState * - * Returns: true if the KVM VCPU can enable its PMU + * Returns: true if KVM can enable the PMU * and false otherwise. */ -bool kvm_arm_pmu_supported(CPUState *cs); +bool kvm_arm_pmu_supported(void); /** * kvm_arm_sve_supported: - * @cs: CPUState * - * Returns true if the KVM VCPU can enable SVE and false otherwise. + * Returns true if KVM can enable SVE and false otherwise. */ -bool kvm_arm_sve_supported(CPUState *cs); +bool kvm_arm_sve_supported(void); /** * kvm_arm_get_max_vm_ipa_size: @@ -XXX,XX +XXX,XX @@ static inline void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) static inline void kvm_arm_add_vcpu_properties(Object *obj) {} -static inline bool kvm_arm_aarch32_supported(CPUState *cs) +static inline bool kvm_arm_aarch32_supported(void) { return false; } -static inline bool kvm_arm_pmu_supported(CPUState *cs) +static inline bool kvm_arm_pmu_supported(void) { return false; } -static inline bool kvm_arm_sve_supported(CPUState *cs) +static inline bool kvm_arm_sve_supported(void) { return false; } diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_set_pmu(Object *obj, bool value, Error **errp) ARMCPU *cpu = ARM_CPU(obj); if (value) { - if (kvm_enabled() && !kvm_arm_pmu_supported(CPU(cpu))) { + if (kvm_enabled() && !kvm_arm_pmu_supported()) { error_setg(errp, "'pmu' feature not supported by KVM on this host"); return; } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) /* Collect the set of vector lengths supported by KVM. */ bitmap_zero(kvm_supported, ARM_MAX_VQ); - if (kvm_enabled() && kvm_arm_sve_supported(CPU(cpu))) { + if (kvm_enabled() && kvm_arm_sve_supported()) { kvm_arm_sve_get_vls(CPU(cpu), kvm_supported); } else if (kvm_enabled()) { assert(!cpu_isar_feature(aa64_sve, cpu)); @@ -XXX,XX +XXX,XX @@ static void cpu_max_set_sve_max_vq(Object *obj, Visitor *v, const char *name, return; } - if (kvm_enabled() && !kvm_arm_sve_supported(CPU(cpu))) { + if (kvm_enabled() && !kvm_arm_sve_supported()) { error_setg(errp, "cannot set sve-max-vq"); error_append_hint(errp, "SVE not supported by KVM on this host\n"); return; @@ -XXX,XX +XXX,XX @@ static void cpu_arm_set_sve_vq(Object *obj, Visitor *v, const char *name, return; } - if (value && kvm_enabled() && !kvm_arm_sve_supported(CPU(cpu))) { + if (value && kvm_enabled() && !kvm_arm_sve_supported()) { error_setg(errp, "cannot enable %s", name); error_append_hint(errp, "SVE not supported by KVM on this host\n"); return; @@ -XXX,XX +XXX,XX @@ static void cpu_arm_set_sve(Object *obj, Visitor *v, const char *name, return; } - if (value && kvm_enabled() && !kvm_arm_sve_supported(CPU(cpu))) { + if (value && kvm_enabled() && !kvm_arm_sve_supported()) { error_setg(errp, "'sve' feature not supported by KVM on this host"); return; } @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported(CPU(cpu))) { + if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { error_setg(errp, "'aarch64' feature cannot be disabled " "unless KVM is enabled and 32-bit EL1 " "is supported"); diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ void kvm_arm_add_vcpu_properties(Object *obj) } } -bool kvm_arm_pmu_supported(CPUState *cpu) +bool kvm_arm_pmu_supported(void) { - return kvm_check_extension(cpu->kvm_state, KVM_CAP_ARM_PMU_V3); + return kvm_check_extension(kvm_state, KVM_CAP_ARM_PMU_V3); } int kvm_arm_get_max_vm_ipa_size(MachineState *ms) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) return true; } -bool kvm_arm_aarch32_supported(CPUState *cpu) +bool kvm_arm_aarch32_supported(void) { - KVMState *s = KVM_STATE(current_accel()); - - return kvm_check_extension(s, KVM_CAP_ARM_EL1_32BIT); + return kvm_check_extension(kvm_state, KVM_CAP_ARM_EL1_32BIT); } -bool kvm_arm_sve_supported(CPUState *cpu) +bool kvm_arm_sve_supported(void) { - KVMState *s = KVM_STATE(current_accel()); - - return kvm_check_extension(s, KVM_CAP_ARM_SVE); + return kvm_check_extension(kvm_state, KVM_CAP_ARM_SVE); } QEMU_BUILD_BUG_ON(KVM_ARM64_SVE_VQ_MIN != 1); @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) env->features &= ~(1ULL << ARM_FEATURE_PMU); } if (cpu_isar_feature(aa64_sve, cpu)) { - assert(kvm_arm_sve_supported(cs)); + assert(kvm_arm_sve_supported()); cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_SVE; } -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Some cpu features may be enabled and disabled for all configurations that support the feature. Let's test that. A recent regression[*] inspired adding these tests. [*] '-cpu host,pmu=on' caused a segfault Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200623090622.30365-2-philmd@redhat.com Message-Id: <20200623082310.17577-1-drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 38 ++++++++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 4 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static bool resp_get_feature(QDict *resp, const char *feature) qobject_unref(_resp); \ }) -#define assert_feature(qts, cpu_type, feature, expected_value) \ +#define resp_assert_feature(resp, feature, expected_value) \ ({ \ - QDict *_resp, *_props; \ + QDict *_props; \ \ - _resp = do_query_no_props(qts, cpu_type); \ g_assert(_resp); \ g_assert(resp_has_props(_resp)); \ _props = resp_get_props(_resp); \ g_assert(qdict_get(_props, feature)); \ g_assert(qdict_get_bool(_props, feature) == (expected_value)); \ +}) + +#define assert_feature(qts, cpu_type, feature, expected_value) \ +({ \ + QDict *_resp; \ + \ + _resp = do_query_no_props(qts, cpu_type); \ + g_assert(_resp); \ + resp_assert_feature(_resp, feature, expected_value); \ + qobject_unref(_resp); \ +}) + +#define assert_set_feature(qts, cpu_type, feature, value) \ +({ \ + const char *_fmt = (value) ? "{ %s: true }" : "{ %s: false }"; \ + QDict *_resp; \ + \ + _resp = do_query(qts, cpu_type, _fmt, feature); \ + g_assert(_resp); \ + resp_assert_feature(_resp, feature, value); \ qobject_unref(_resp); \ }) @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_error(qts, "host", "The CPU type 'host' requires KVM", NULL); /* Test expected feature presence/absence for some cpu types */ - assert_has_feature_enabled(qts, "max", "pmu"); assert_has_feature_enabled(qts, "cortex-a15", "pmu"); assert_has_not_feature(qts, "cortex-a15", "aarch64"); + /* Enabling and disabling pmu should always work. */ + assert_has_feature_enabled(qts, "max", "pmu"); + assert_set_feature(qts, "max", "pmu", false); + assert_set_feature(qts, "max", "pmu", true); + assert_has_not_feature(qts, "max", "kvm-no-adjvtime"); if (g_str_equal(qtest_get_arch(), "aarch64")) { @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) return; } + /* Enabling and disabling kvm-no-adjvtime should always work. */ assert_has_feature_disabled(qts, "host", "kvm-no-adjvtime"); + assert_set_feature(qts, "host", "kvm-no-adjvtime", true); + assert_set_feature(qts, "host", "kvm-no-adjvtime", false); if (g_str_equal(qtest_get_arch(), "aarch64")) { bool kvm_supports_sve; @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) char *error; assert_has_feature_enabled(qts, "host", "aarch64"); + + /* Enabling and disabling pmu should always work. */ assert_has_feature_enabled(qts, "host", "pmu"); + assert_set_feature(qts, "host", "pmu", false); + assert_set_feature(qts, "host", "pmu", true); assert_error(qts, "cortex-a15", "We cannot guarantee the CPU type 'cortex-a15' works " -- 2.20.1 From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> This adds support for memory(pc-dimm) hot remove on arm/virt that uses acpi ged device. NVDIMM hot removal is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Message-id: 20200622124157.20360-1-shameerali.kolothum.thodi@huawei.com Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/acpi/generic_event_device.c | 29 ++++++++++++++++ hw/arm/virt.c | 62 ++++++++++++++++++++++++++++++++-- 2 files changed, 89 insertions(+), 2 deletions(-) diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/generic_event_device.c +++ b/hw/acpi/generic_event_device.c @@ -XXX,XX +XXX,XX @@ static void acpi_ged_device_plug_cb(HotplugHandler *hotplug_dev, } } +static void acpi_ged_unplug_request_cb(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + AcpiGedState *s = ACPI_GED(hotplug_dev); + + if ((object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) && + !(object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)))) { + acpi_memory_unplug_request_cb(hotplug_dev, &s->memhp_state, dev, errp); + } else { + error_setg(errp, "acpi: device unplug request for unsupported device" + " type: %s", object_get_typename(OBJECT(dev))); + } +} + +static void acpi_ged_unplug_cb(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + AcpiGedState *s = ACPI_GED(hotplug_dev); + + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { + acpi_memory_unplug_cb(&s->memhp_state, dev, errp); + } else { + error_setg(errp, "acpi: device unplug for unsupported device" + " type: %s", object_get_typename(OBJECT(dev))); + } +} + static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev) { AcpiGedState *s = ACPI_GED(adev); @@ -XXX,XX +XXX,XX @@ static void acpi_ged_class_init(ObjectClass *class, void *data) dc->vmsd = &vmstate_acpi_ged; hc->plug = acpi_ged_device_plug_cb; + hc->unplug_request = acpi_ged_unplug_request_cb; + hc->unplug = acpi_ged_unplug_cb; adevc->send_event = acpi_ged_send_event; } diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev, } } +static void virt_dimm_unplug_request(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + Error *local_err = NULL; + + if (!vms->acpi_dev) { + error_setg(&local_err, + "memory hotplug is not enabled: missing acpi-ged device"); + goto out; + } + + if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { + error_setg(&local_err, + "nvdimm device hot unplug is not supported yet."); + goto out; + } + + hotplug_handler_unplug_request(HOTPLUG_HANDLER(vms->acpi_dev), dev, + &local_err); +out: + error_propagate(errp, local_err); +} + +static void virt_dimm_unplug(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + Error *local_err = NULL; + + hotplug_handler_unplug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &local_err); + if (local_err) { + goto out; + } + + pc_dimm_unplug(PC_DIMM(dev), MACHINE(vms)); + qdev_unrealize(dev); + +out: + error_propagate(errp, local_err); +} + static void virt_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { - error_setg(errp, "device unplug request for unsupported device" - " type: %s", object_get_typename(OBJECT(dev))); + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { + virt_dimm_unplug_request(hotplug_dev, dev, errp); + } else { + error_setg(errp, "device unplug request for unsupported device" + " type: %s", object_get_typename(OBJECT(dev))); + } +} + +static void virt_machine_device_unplug_cb(HotplugHandler *hotplug_dev, + DeviceState *dev, Error **errp) +{ + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { + virt_dimm_unplug(hotplug_dev, dev, errp); + } else { + error_setg(errp, "virt: device unplug for unsupported device" + " type: %s", object_get_typename(OBJECT(dev))); + } } static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) hc->pre_plug = virt_machine_device_pre_plug_cb; hc->plug = virt_machine_device_plug_cb; hc->unplug_request = virt_machine_device_unplug_request_cb; + hc->unplug = virt_machine_device_unplug_cb; mc->numa_mem_supported = true; mc->nvdimm_supported = true; mc->auto_enable_numa_with_memhp = true; -- 2.20.1 The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1