The Nuvoton NPCM7xx SoC family are used to implement Baseboard
Management Controllers in servers. While the family includes four SoCs,
this patch implements limited support for two of them: NPCM730 (targeted
for Data Center applications) and NPCM750 (targeted for Enterprise
applications).
This patch includes little more than the bare minimum needed to boot a
Linux kernel built with NPCM7xx support in direct-kernel mode:
- Two Cortex-A9 CPU cores with built-in periperhals.
- Global Configuration Registers.
- Clock Management.
- 3 Timer Modules with 5 timers each.
- 4 serial ports.
The chips themselves have a lot more features, some of which will be
added to the model at a later stage.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
---
MAINTAINERS | 2 +
hw/arm/Makefile.objs | 1 +
hw/arm/npcm7xx.c | 330 +++++++++++++++++++++++++++++++++++++++
include/hw/arm/npcm7xx.h | 80 ++++++++++
4 files changed, 413 insertions(+)
create mode 100644 hw/arm/npcm7xx.c
create mode 100644 include/hw/arm/npcm7xx.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 97d24b1443..077c86643c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -726,8 +726,10 @@ M: Havard Skinnemoen <hskinnemoen@google.com>
M: Tyrone Ting <kfting@nuvoton.com>
L: qemu-arm@nongnu.org
S: Supported
+F: hw/arm/npcm7xx*
F: hw/misc/npcm7xx*
F: hw/timer/npcm7xx*
+F: include/hw/arm/npcm7xx*
F: include/hw/misc/npcm7xx*
F: include/hw/timer/npcm7xx*
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 534a6a119e..13d163a599 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -41,6 +41,7 @@ obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
obj-$(CONFIG_STM32F405_SOC) += stm32f405_soc.o
obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zynqmp.o xlnx-zcu102.o
obj-$(CONFIG_XLNX_VERSAL) += xlnx-versal.o xlnx-versal-virt.o
+obj-$(CONFIG_NPCM7XX) += npcm7xx.o
obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
new file mode 100644
index 0000000000..a5dbf08c00
--- /dev/null
+++ b/hw/arm/npcm7xx.c
@@ -0,0 +1,330 @@
+/*
+ * Nuvoton NPCM7xx SoC family.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "exec/address-spaces.h"
+#include "hw/arm/npcm7xx.h"
+#include "hw/char/serial.h"
+#include "hw/loader.h"
+#include "hw/misc/unimp.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/units.h"
+#include "sysemu/sysemu.h"
+
+/* The first half of the address space is reserved for DDR4 DRAM. */
+#define NPCM7XX_DRAM_BA (0x00000000)
+#define NPCM7XX_DRAM_SZ (2 * GiB)
+
+/*
+ * This covers the whole MMIO space. We'll use this to catch any MMIO accesses
+ * that aren't handled by any device.
+ */
+#define NPCM7XX_MMIO_BA (0x80000000)
+#define NPCM7XX_MMIO_SZ (0x7FFD0000)
+
+/* Core system modules. */
+#define NPCM7XX_L2C_BA (0xF03FC000)
+#define NPCM7XX_CPUP_BA (0xF03FE000)
+#define NPCM7XX_GCR_BA (0xF0800000)
+#define NPCM7XX_CLK_BA (0xF0801000)
+
+/* Memory blocks at the end of the address space */
+#define NPCM7XX_RAM2_BA (0xFFFD0000)
+#define NPCM7XX_RAM2_SZ (128 * KiB)
+#define NPCM7XX_ROM_BA (0xFFFF0000)
+#define NPCM7XX_ROM_SZ (64 * KiB)
+
+/*
+ * Interrupt lines going into the GIC. This does not include internal Cortex-A9
+ * interrupts.
+ */
+enum NPCM7xxInterrupt {
+ NPCM7XX_UART0_IRQ = 2,
+ NPCM7XX_UART1_IRQ,
+ NPCM7XX_UART2_IRQ,
+ NPCM7XX_UART3_IRQ,
+ NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */
+ NPCM7XX_TIMER1_IRQ,
+ NPCM7XX_TIMER2_IRQ,
+ NPCM7XX_TIMER3_IRQ,
+ NPCM7XX_TIMER4_IRQ,
+ NPCM7XX_TIMER5_IRQ, /* Timer Module 1 */
+ NPCM7XX_TIMER6_IRQ,
+ NPCM7XX_TIMER7_IRQ,
+ NPCM7XX_TIMER8_IRQ,
+ NPCM7XX_TIMER9_IRQ,
+ NPCM7XX_TIMER10_IRQ, /* Timer Module 2 */
+ NPCM7XX_TIMER11_IRQ,
+ NPCM7XX_TIMER12_IRQ,
+ NPCM7XX_TIMER13_IRQ,
+ NPCM7XX_TIMER14_IRQ,
+};
+
+/* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */
+#define NPCM7XX_NUM_IRQ (160)
+
+/* Register base address for each Timer Module */
+static const hwaddr npcm7xx_tim_addr[] = {
+ 0xF0008000,
+ 0xF0009000,
+ 0xF000A000,
+};
+
+/* Register base address for each 16550 UART */
+static const hwaddr npcm7xx_uart_addr[] = {
+ 0xF0001000,
+ 0xF0002000,
+ 0xF0003000,
+ 0xF0004000,
+};
+
+void npcm7xx_write_secondary_boot(ARMCPU *cpu, const struct arm_boot_info *info)
+{
+ /*
+ * The default smpboot stub halts the secondary CPU with a 'wfi'
+ * instruction, but the arch/arm/mach-npcm/platsmp.c in the Linux kernel
+ * does not send an IPI to wake it up, so the second CPU fails to boot. So
+ * we need to provide our own smpboot stub that can not use 'wfi', it has
+ * to spin the secondary CPU until the first CPU writes to the SCRPAD reg.
+ */
+ static const uint8_t smpboot[] = {
+ 0x18, 0x20, 0x9f, 0xe5, /* ldr r2, bootreg_addr */
+ 0x00, 0x00, 0xa0, 0xe3, /* mov r0, #0 */
+ 0x00, 0x00, 0x82, 0xe5, /* str r0, [r2] */
+ 0x02, 0xf0, 0x20, 0xe3, /* wfe */
+ 0x00, 0x10, 0x92, 0xe5, /* ldr r1, [r2] */
+ 0x01, 0x00, 0x11, 0xe1, /* tst r1, r1 */
+ 0xfb, 0xff, 0xff, 0x0a, /* beq <wfe> */
+ 0x11, 0xff, 0x2f, 0xe1, /* bx r1 */
+ (NPCM7XX_SMP_BOOTREG_ADDR >> 0) & 0xff,
+ (NPCM7XX_SMP_BOOTREG_ADDR >> 8) & 0xff,
+ (NPCM7XX_SMP_BOOTREG_ADDR >> 16) & 0xff,
+ (NPCM7XX_SMP_BOOTREG_ADDR >> 24) & 0xff,
+ };
+
+ rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot),
+ NPCM7XX_SMP_LOADER_START);
+}
+
+static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n)
+{
+ return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n);
+}
+
+static void npcm7xx_init(Object *obj)
+{
+ NPCM7xxState *s = NPCM7XX(obj);
+ int i;
+
+ for (i = 0; i < NPCM7XX_MAX_NUM_CPUS; i++) {
+ object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]),
+ sizeof(s->cpu[i]),
+ ARM_CPU_TYPE_NAME("cortex-a9"),
+ &error_abort, NULL);
+ }
+
+ sysbus_init_child_obj(obj, "a9mpcore", &s->a9mpcore,
+ sizeof(s->a9mpcore), TYPE_A9MPCORE_PRIV);
+ sysbus_init_child_obj(obj, "gcr", OBJECT(&s->gcr), sizeof(s->gcr),
+ TYPE_NPCM7XX_GCR);
+ sysbus_init_child_obj(obj, "clk", OBJECT(&s->clk), sizeof(s->clk),
+ TYPE_NPCM7XX_CLK);
+
+ for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
+ sysbus_init_child_obj(obj, "tim[*]", OBJECT(&s->tim[i]),
+ sizeof(s->tim[i]), TYPE_NPCM7XX_TIMER);
+ }
+}
+
+static void npcm7xx_realize(DeviceState *dev, Error **errp)
+{
+ NPCM7xxState *s = NPCM7XX(dev);
+ NPCM7xxClass *sc = NPCM7XX_GET_CLASS(s);
+ Error *err = NULL;
+ int i;
+
+ /* I/O space -- unimplemented unless overridden below. */
+ create_unimplemented_device("npcm7xx.io", NPCM7XX_MMIO_BA, NPCM7XX_MMIO_SZ);
+
+ /* CPUs */
+ for (i = 0; i < sc->num_cpus; i++) {
+ object_property_set_int(OBJECT(&s->cpu[i]),
+ arm_cpu_mp_affinity(i, NPCM7XX_MAX_NUM_CPUS),
+ "mp-affinity", &error_abort);
+ object_property_set_int(OBJECT(&s->cpu[i]), NPCM7XX_GIC_CPU_IF_ADDR,
+ "reset-cbar", &error_abort);
+ object_property_set_bool(OBJECT(&s->cpu[i]), true,
+ "reset-hivecs", &error_abort);
+
+ /* Disable security extensions. */
+ if (object_property_find(OBJECT(&s->cpu[i]), "has_el3", NULL)) {
+ object_property_set_bool(OBJECT(&s->cpu[i]), false, "has_el3",
+ &error_abort);
+ }
+
+ object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ }
+
+ /* A9MPCORE peripherals */
+ object_property_set_int(OBJECT(&s->a9mpcore), sc->num_cpus, "num-cpu",
+ &error_abort);
+ object_property_set_int(OBJECT(&s->a9mpcore), NPCM7XX_NUM_IRQ, "num-irq",
+ &error_abort);
+ object_property_set_bool(OBJECT(&s->a9mpcore), true, "realized",
+ &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->a9mpcore), 0, NPCM7XX_CPUP_BA);
+
+ for (i = 0; i < sc->num_cpus; i++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i,
+ qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i + sc->num_cpus,
+ qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_FIQ));
+ }
+
+ /* L2 cache controller */
+ sysbus_create_simple("l2x0", NPCM7XX_L2C_BA, NULL);
+
+ /* System Global Control Registers (GCR) */
+ object_property_set_int(OBJECT(&s->gcr), sc->disabled_modules,
+ "disabled-modules", &err);
+ object_property_set_link(OBJECT(&s->gcr), OBJECT(s->dram), "dram", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ object_property_set_bool(OBJECT(&s->gcr), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gcr), 0, NPCM7XX_GCR_BA);
+
+ /* Clock Control Registers (CLK) */
+ object_property_set_bool(OBJECT(&s->clk), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->clk), 0, NPCM7XX_CLK_BA);
+
+ /* Timer Modules (TIM) */
+ QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
+ for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
+ Object *t = OBJECT(&s->tim[i]);
+ int first_irq;
+ int j;
+
+ object_property_set_bool(t, true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(t), 0, npcm7xx_tim_addr[i]);
+
+ first_irq = NPCM7XX_TIMER0_IRQ + i * NPCM7XX_TIMERS_PER_CTRL;
+ for (j = 0; j < NPCM7XX_TIMERS_PER_CTRL; j++) {
+ qemu_irq irq = npcm7xx_irq(s, first_irq + j);
+ sysbus_connect_irq(SYS_BUS_DEVICE(t), j, irq);
+ }
+ }
+
+ /* UART0..3 (16550 compatible) */
+ for (i = 0; i < ARRAY_SIZE(npcm7xx_uart_addr); i++) {
+ serial_mm_init(get_system_memory(), npcm7xx_uart_addr[i], 2,
+ npcm7xx_irq(s, NPCM7XX_UART0_IRQ + i), 115200,
+ serial_hd(i), DEVICE_LITTLE_ENDIAN);
+ }
+
+ /* RAM2 (SRAM) */
+ memory_region_init_ram(&s->sram, OBJECT(dev), "ram2",
+ NPCM7XX_RAM2_SZ, &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ memory_region_add_subregion(get_system_memory(), NPCM7XX_RAM2_BA, &s->sram);
+
+ /* Internal ROM */
+ memory_region_init_rom(&s->irom, OBJECT(dev), "irom", NPCM7XX_ROM_SZ, &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ memory_region_add_subregion(get_system_memory(), NPCM7XX_ROM_BA, &s->irom);
+
+ /* External DDR4 SDRAM */
+ memory_region_add_subregion(get_system_memory(), NPCM7XX_DRAM_BA, s->dram);
+}
+
+static Property npcm7xx_properties[] = {
+ DEFINE_PROP_LINK("dram", NPCM7xxState, dram, TYPE_MEMORY_REGION,
+ MemoryRegion *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void npcm7xx_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = npcm7xx_realize;
+ dc->user_creatable = false;
+ device_class_set_props(dc, npcm7xx_properties);
+}
+
+static void npcm730_class_init(ObjectClass *oc, void *data)
+{
+ NPCM7xxClass *nc = NPCM7XX_CLASS(oc);
+
+ /* NPCM730 is optimized for data center use, so no graphics, etc. */
+ nc->disabled_modules = 0x00300395;
+ nc->num_cpus = 2;
+}
+
+static void npcm750_class_init(ObjectClass *oc, void *data)
+{
+ NPCM7xxClass *nc = NPCM7XX_CLASS(oc);
+
+ /* NPCM750 has 2 cores and a full set of peripherals */
+ nc->disabled_modules = 0x00000000;
+ nc->num_cpus = 2;
+}
+
+static const TypeInfo npcm7xx_soc_types[] = {
+ {
+ .name = TYPE_NPCM7XX,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(NPCM7xxState),
+ .instance_init = npcm7xx_init,
+ .class_size = sizeof(NPCM7xxClass),
+ .class_init = npcm7xx_class_init,
+ .abstract = true,
+ }, {
+ .name = TYPE_NPCM730,
+ .parent = TYPE_NPCM7XX,
+ .class_init = npcm730_class_init,
+ }, {
+ .name = TYPE_NPCM750,
+ .parent = TYPE_NPCM7XX,
+ .class_init = npcm750_class_init,
+ },
+};
+
+DEFINE_TYPES(npcm7xx_soc_types);
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
new file mode 100644
index 0000000000..38b8c33729
--- /dev/null
+++ b/include/hw/arm/npcm7xx.h
@@ -0,0 +1,80 @@
+/*
+ * Nuvoton NPCM7xx SoC family.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef NPCM7XX_H
+#define NPCM7XX_H
+
+#include "hw/boards.h"
+#include "hw/cpu/a9mpcore.h"
+#include "hw/misc/npcm7xx_clk.h"
+#include "hw/misc/npcm7xx_gcr.h"
+#include "hw/timer/npcm7xx_timer.h"
+#include "target/arm/cpu.h"
+
+#define NPCM7XX_MAX_NUM_CPUS (2)
+
+/* Magic addresses for setting up direct kernel booting and SMP boot stubs. */
+#define NPCM7XX_LOADER_START (0x00000000) /* Start of SDRAM */
+#define NPCM7XX_SMP_LOADER_START (0xFFFF0000) /* Boot ROM */
+#define NPCM7XX_SMP_BOOTREG_ADDR (0xF080013C) /* GCR.SCRPAD */
+#define NPCM7XX_GIC_CPU_IF_ADDR (0xF03FE100) /* GIC within A9 */
+
+typedef struct NPCM7xxState {
+ DeviceState parent;
+
+ ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS];
+ A9MPPrivState a9mpcore;
+
+ MemoryRegion sram;
+ MemoryRegion irom;
+ MemoryRegion *dram;
+
+ NPCM7xxGCRState gcr;
+ NPCM7xxCLKState clk;
+ NPCM7xxTimerCtrlState tim[3];
+} NPCM7xxState;
+
+#define TYPE_NPCM7XX "npcm7xx"
+#define NPCM7XX(obj) OBJECT_CHECK(NPCM7xxState, (obj), TYPE_NPCM7XX)
+
+#define TYPE_NPCM730 "npcm730"
+#define TYPE_NPCM750 "npcm750"
+
+typedef struct NPCM7xxClass {
+ DeviceClass parent;
+
+ /* Bitmask of modules that are permanently disabled on this chip. */
+ uint32_t disabled_modules;
+ /* Number of CPU cores enabled in this SoC class (may be 1 or 2). */
+ uint32_t num_cpus;
+} NPCM7xxClass;
+
+#define NPCM7XX_CLASS(klass) \
+ OBJECT_CLASS_CHECK(NPCM7xxClass, (klass), TYPE_NPCM7XX)
+#define NPCM7XX_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(NPCM7xxClass, (obj), TYPE_NPCM7XX)
+
+/**
+ * npcm7xx_write_secondary_boot - Write stub for booting secondary CPU.
+ * @cpu: The CPU to be booted.
+ * @info: Boot info structure for the board.
+ *
+ * This will write a short code stub to the internal ROM that will keep the
+ * secondary CPU spinning until the primary CPU writes an address to the SCRPAD
+ * register in the GCR, after which the secondary CPU will jump there.
+ */
+extern void npcm7xx_write_secondary_boot(ARMCPU *cpu,
+ const struct arm_boot_info *info);
+
+#endif /* NPCM7XX_H */
--
2.27.0.290.gba653c62da-goog
On 6/12/20 12:30 AM, Havard Skinnemoen wrote:
> The Nuvoton NPCM7xx SoC family are used to implement Baseboard
> Management Controllers in servers. While the family includes four SoCs,
> this patch implements limited support for two of them: NPCM730 (targeted
> for Data Center applications) and NPCM750 (targeted for Enterprise
> applications).
>
> This patch includes little more than the bare minimum needed to boot a
> Linux kernel built with NPCM7xx support in direct-kernel mode:
>
> - Two Cortex-A9 CPU cores with built-in periperhals.
> - Global Configuration Registers.
> - Clock Management.
> - 3 Timer Modules with 5 timers each.
> - 4 serial ports.
>
> The chips themselves have a lot more features, some of which will be
> added to the model at a later stage.
>
> Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
> ---
> MAINTAINERS | 2 +
> hw/arm/Makefile.objs | 1 +
> hw/arm/npcm7xx.c | 330 +++++++++++++++++++++++++++++++++++++++
> include/hw/arm/npcm7xx.h | 80 ++++++++++
> 4 files changed, 413 insertions(+)
> create mode 100644 hw/arm/npcm7xx.c
> create mode 100644 include/hw/arm/npcm7xx.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 97d24b1443..077c86643c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -726,8 +726,10 @@ M: Havard Skinnemoen <hskinnemoen@google.com>
> M: Tyrone Ting <kfting@nuvoton.com>
> L: qemu-arm@nongnu.org
> S: Supported
> +F: hw/arm/npcm7xx*
> F: hw/misc/npcm7xx*
> F: hw/timer/npcm7xx*
> +F: include/hw/arm/npcm7xx*
> F: include/hw/misc/npcm7xx*
> F: include/hw/timer/npcm7xx*
>
> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> index 534a6a119e..13d163a599 100644
> --- a/hw/arm/Makefile.objs
> +++ b/hw/arm/Makefile.objs
> @@ -41,6 +41,7 @@ obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
> obj-$(CONFIG_STM32F405_SOC) += stm32f405_soc.o
> obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zynqmp.o xlnx-zcu102.o
> obj-$(CONFIG_XLNX_VERSAL) += xlnx-versal.o xlnx-versal-virt.o
> +obj-$(CONFIG_NPCM7XX) += npcm7xx.o
> obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
> obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
> obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o
> diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
> new file mode 100644
> index 0000000000..a5dbf08c00
> --- /dev/null
> +++ b/hw/arm/npcm7xx.c
> @@ -0,0 +1,330 @@
> +/*
> + * Nuvoton NPCM7xx SoC family.
> + *
> + * Copyright 2020 Google LLC
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "qemu/osdep.h"
> +
> +#include "exec/address-spaces.h"
> +#include "hw/arm/npcm7xx.h"
> +#include "hw/char/serial.h"
> +#include "hw/loader.h"
> +#include "hw/misc/unimp.h"
> +#include "hw/qdev-properties.h"
> +#include "qapi/error.h"
> +#include "qemu/units.h"
> +#include "sysemu/sysemu.h"
> +
> +/* The first half of the address space is reserved for DDR4 DRAM. */
> +#define NPCM7XX_DRAM_BA (0x00000000)
> +#define NPCM7XX_DRAM_SZ (2 * GiB)
> +
> +/*
> + * This covers the whole MMIO space. We'll use this to catch any MMIO accesses
> + * that aren't handled by any device.
> + */
> +#define NPCM7XX_MMIO_BA (0x80000000)
> +#define NPCM7XX_MMIO_SZ (0x7FFD0000)
> +
> +/* Core system modules. */
> +#define NPCM7XX_L2C_BA (0xF03FC000)
> +#define NPCM7XX_CPUP_BA (0xF03FE000)
> +#define NPCM7XX_GCR_BA (0xF0800000)
> +#define NPCM7XX_CLK_BA (0xF0801000)
> +
> +/* Memory blocks at the end of the address space */
> +#define NPCM7XX_RAM2_BA (0xFFFD0000)
> +#define NPCM7XX_RAM2_SZ (128 * KiB)
> +#define NPCM7XX_ROM_BA (0xFFFF0000)
> +#define NPCM7XX_ROM_SZ (64 * KiB)
> +
> +/*
> + * Interrupt lines going into the GIC. This does not include internal Cortex-A9
> + * interrupts.
> + */
> +enum NPCM7xxInterrupt {
> + NPCM7XX_UART0_IRQ = 2,
> + NPCM7XX_UART1_IRQ,
> + NPCM7XX_UART2_IRQ,
> + NPCM7XX_UART3_IRQ,
> + NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */
> + NPCM7XX_TIMER1_IRQ,
> + NPCM7XX_TIMER2_IRQ,
> + NPCM7XX_TIMER3_IRQ,
> + NPCM7XX_TIMER4_IRQ,
> + NPCM7XX_TIMER5_IRQ, /* Timer Module 1 */
> + NPCM7XX_TIMER6_IRQ,
> + NPCM7XX_TIMER7_IRQ,
> + NPCM7XX_TIMER8_IRQ,
> + NPCM7XX_TIMER9_IRQ,
> + NPCM7XX_TIMER10_IRQ, /* Timer Module 2 */
> + NPCM7XX_TIMER11_IRQ,
> + NPCM7XX_TIMER12_IRQ,
> + NPCM7XX_TIMER13_IRQ,
> + NPCM7XX_TIMER14_IRQ,
> +};
> +
> +/* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */
> +#define NPCM7XX_NUM_IRQ (160)
> +
> +/* Register base address for each Timer Module */
> +static const hwaddr npcm7xx_tim_addr[] = {
> + 0xF0008000,
> + 0xF0009000,
> + 0xF000A000,
> +};
> +
> +/* Register base address for each 16550 UART */
> +static const hwaddr npcm7xx_uart_addr[] = {
> + 0xF0001000,
> + 0xF0002000,
> + 0xF0003000,
> + 0xF0004000,
> +};
> +
> +void npcm7xx_write_secondary_boot(ARMCPU *cpu, const struct arm_boot_info *info)
> +{
> + /*
> + * The default smpboot stub halts the secondary CPU with a 'wfi'
> + * instruction, but the arch/arm/mach-npcm/platsmp.c in the Linux kernel
> + * does not send an IPI to wake it up, so the second CPU fails to boot. So
> + * we need to provide our own smpboot stub that can not use 'wfi', it has
> + * to spin the secondary CPU until the first CPU writes to the SCRPAD reg.
> + */
> + static const uint8_t smpboot[] = {
> + 0x18, 0x20, 0x9f, 0xe5, /* ldr r2, bootreg_addr */
> + 0x00, 0x00, 0xa0, 0xe3, /* mov r0, #0 */
> + 0x00, 0x00, 0x82, 0xe5, /* str r0, [r2] */
> + 0x02, 0xf0, 0x20, 0xe3, /* wfe */
> + 0x00, 0x10, 0x92, 0xe5, /* ldr r1, [r2] */
> + 0x01, 0x00, 0x11, 0xe1, /* tst r1, r1 */
> + 0xfb, 0xff, 0xff, 0x0a, /* beq <wfe> */
> + 0x11, 0xff, 0x2f, 0xe1, /* bx r1 */
> + (NPCM7XX_SMP_BOOTREG_ADDR >> 0) & 0xff,
> + (NPCM7XX_SMP_BOOTREG_ADDR >> 8) & 0xff,
> + (NPCM7XX_SMP_BOOTREG_ADDR >> 16) & 0xff,
> + (NPCM7XX_SMP_BOOTREG_ADDR >> 24) & 0xff,
> + };
> +
> + rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot),
> + NPCM7XX_SMP_LOADER_START);
> +}
> +
> +static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n)
> +{
> + return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n);
> +}
> +
> +static void npcm7xx_init(Object *obj)
> +{
> + NPCM7xxState *s = NPCM7XX(obj);
> + int i;
> +
> + for (i = 0; i < NPCM7XX_MAX_NUM_CPUS; i++) {
> + object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]),
> + sizeof(s->cpu[i]),
> + ARM_CPU_TYPE_NAME("cortex-a9"),
> + &error_abort, NULL);
> + }
> +
> + sysbus_init_child_obj(obj, "a9mpcore", &s->a9mpcore,
> + sizeof(s->a9mpcore), TYPE_A9MPCORE_PRIV);
> + sysbus_init_child_obj(obj, "gcr", OBJECT(&s->gcr), sizeof(s->gcr),
> + TYPE_NPCM7XX_GCR);
> + sysbus_init_child_obj(obj, "clk", OBJECT(&s->clk), sizeof(s->clk),
> + TYPE_NPCM7XX_CLK);
> +
> + for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
> + sysbus_init_child_obj(obj, "tim[*]", OBJECT(&s->tim[i]),
> + sizeof(s->tim[i]), TYPE_NPCM7XX_TIMER);
> + }
This needs to use object_initialize_child() now. sysbus_init_child_obj()
was deprecated.
> +}
> +
> +static void npcm7xx_realize(DeviceState *dev, Error **errp)
> +{
> + NPCM7xxState *s = NPCM7XX(dev);
> + NPCM7xxClass *sc = NPCM7XX_GET_CLASS(s);
'nc' maybe.
> + Error *err = NULL;
> + int i;
> +
> + /* I/O space -- unimplemented unless overridden below. */
> + create_unimplemented_device("npcm7xx.io", NPCM7XX_MMIO_BA, NPCM7XX_MMIO_SZ);
> +
> + /* CPUs */
> + for (i = 0; i < sc->num_cpus; i++) {
> + object_property_set_int(OBJECT(&s->cpu[i]),
> + arm_cpu_mp_affinity(i, NPCM7XX_MAX_NUM_CPUS),
> + "mp-affinity", &error_abort);
> + object_property_set_int(OBJECT(&s->cpu[i]), NPCM7XX_GIC_CPU_IF_ADDR,
> + "reset-cbar", &error_abort);
> + object_property_set_bool(OBJECT(&s->cpu[i]), true,
> + "reset-hivecs", &error_abort);
> +
> + /* Disable security extensions. */
> + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3", NULL)) {
> + object_property_set_bool(OBJECT(&s->cpu[i]), false, "has_el3",
> + &error_abort);
> + }
> +
> + object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + }
> +
> + /* A9MPCORE peripherals */
> + object_property_set_int(OBJECT(&s->a9mpcore), sc->num_cpus, "num-cpu",
> + &error_abort);
> + object_property_set_int(OBJECT(&s->a9mpcore), NPCM7XX_NUM_IRQ, "num-irq",
> + &error_abort);
> + object_property_set_bool(OBJECT(&s->a9mpcore), true, "realized",
> + &error_abort);
you should use sysbus_realize() now and below also.
C.
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->a9mpcore), 0, NPCM7XX_CPUP_BA);
> +
> + for (i = 0; i < sc->num_cpus; i++) {
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i,
> + qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i + sc->num_cpus,
> + qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_FIQ));
> + }
> +
> + /* L2 cache controller */
> + sysbus_create_simple("l2x0", NPCM7XX_L2C_BA, NULL);
> +
> + /* System Global Control Registers (GCR) */
> + object_property_set_int(OBJECT(&s->gcr), sc->disabled_modules,
> + "disabled-modules", &err);
> + object_property_set_link(OBJECT(&s->gcr), OBJECT(s->dram), "dram", &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + object_property_set_bool(OBJECT(&s->gcr), true, "realized", &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gcr), 0, NPCM7XX_GCR_BA);
> +
> + /* Clock Control Registers (CLK) */
> + object_property_set_bool(OBJECT(&s->clk), true, "realized", &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->clk), 0, NPCM7XX_CLK_BA);
> +
> + /* Timer Modules (TIM) */
> + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
> + for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
> + Object *t = OBJECT(&s->tim[i]);
> + int first_irq;
> + int j;
> +
> + object_property_set_bool(t, true, "realized", &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + sysbus_mmio_map(SYS_BUS_DEVICE(t), 0, npcm7xx_tim_addr[i]);
> +
> + first_irq = NPCM7XX_TIMER0_IRQ + i * NPCM7XX_TIMERS_PER_CTRL;
> + for (j = 0; j < NPCM7XX_TIMERS_PER_CTRL; j++) {
> + qemu_irq irq = npcm7xx_irq(s, first_irq + j);
> + sysbus_connect_irq(SYS_BUS_DEVICE(t), j, irq);
> + }
> + }
> +
> + /* UART0..3 (16550 compatible) */
> + for (i = 0; i < ARRAY_SIZE(npcm7xx_uart_addr); i++) {
> + serial_mm_init(get_system_memory(), npcm7xx_uart_addr[i], 2,
> + npcm7xx_irq(s, NPCM7XX_UART0_IRQ + i), 115200,
> + serial_hd(i), DEVICE_LITTLE_ENDIAN);
> + }
> +
> + /* RAM2 (SRAM) */
> + memory_region_init_ram(&s->sram, OBJECT(dev), "ram2",
> + NPCM7XX_RAM2_SZ, &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + memory_region_add_subregion(get_system_memory(), NPCM7XX_RAM2_BA, &s->sram);
> +
> + /* Internal ROM */
> + memory_region_init_rom(&s->irom, OBJECT(dev), "irom", NPCM7XX_ROM_SZ, &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + memory_region_add_subregion(get_system_memory(), NPCM7XX_ROM_BA, &s->irom);
> +
> + /* External DDR4 SDRAM */
> + memory_region_add_subregion(get_system_memory(), NPCM7XX_DRAM_BA, s->dram);
> +}
> +
> +static Property npcm7xx_properties[] = {
> + DEFINE_PROP_LINK("dram", NPCM7xxState, dram, TYPE_MEMORY_REGION,
> + MemoryRegion *),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void npcm7xx_class_init(ObjectClass *oc, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(oc);
> +
> + dc->realize = npcm7xx_realize;
> + dc->user_creatable = false;
> + device_class_set_props(dc, npcm7xx_properties);
> +}
> +
> +static void npcm730_class_init(ObjectClass *oc, void *data)
> +{
> + NPCM7xxClass *nc = NPCM7XX_CLASS(oc);
> +
> + /* NPCM730 is optimized for data center use, so no graphics, etc. */
> + nc->disabled_modules = 0x00300395;
> + nc->num_cpus = 2;
> +}
> +
> +static void npcm750_class_init(ObjectClass *oc, void *data)
> +{
> + NPCM7xxClass *nc = NPCM7XX_CLASS(oc);
> +
> + /* NPCM750 has 2 cores and a full set of peripherals */
> + nc->disabled_modules = 0x00000000;
> + nc->num_cpus = 2;
> +}
> +
> +static const TypeInfo npcm7xx_soc_types[] = {
> + {
> + .name = TYPE_NPCM7XX,
> + .parent = TYPE_DEVICE,
> + .instance_size = sizeof(NPCM7xxState),
> + .instance_init = npcm7xx_init,
> + .class_size = sizeof(NPCM7xxClass),
> + .class_init = npcm7xx_class_init,
> + .abstract = true,
> + }, {
> + .name = TYPE_NPCM730,
> + .parent = TYPE_NPCM7XX,
> + .class_init = npcm730_class_init,
> + }, {
> + .name = TYPE_NPCM750,
> + .parent = TYPE_NPCM7XX,
> + .class_init = npcm750_class_init,
> + },
> +};
> +
> +DEFINE_TYPES(npcm7xx_soc_types);
> diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
> new file mode 100644
> index 0000000000..38b8c33729
> --- /dev/null
> +++ b/include/hw/arm/npcm7xx.h
> @@ -0,0 +1,80 @@
> +/*
> + * Nuvoton NPCM7xx SoC family.
> + *
> + * Copyright 2020 Google LLC
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#ifndef NPCM7XX_H
> +#define NPCM7XX_H
> +
> +#include "hw/boards.h"
> +#include "hw/cpu/a9mpcore.h"
> +#include "hw/misc/npcm7xx_clk.h"
> +#include "hw/misc/npcm7xx_gcr.h"
> +#include "hw/timer/npcm7xx_timer.h"
> +#include "target/arm/cpu.h"
> +
> +#define NPCM7XX_MAX_NUM_CPUS (2)
> +
> +/* Magic addresses for setting up direct kernel booting and SMP boot stubs. */
> +#define NPCM7XX_LOADER_START (0x00000000) /* Start of SDRAM */
> +#define NPCM7XX_SMP_LOADER_START (0xFFFF0000) /* Boot ROM */
> +#define NPCM7XX_SMP_BOOTREG_ADDR (0xF080013C) /* GCR.SCRPAD */
> +#define NPCM7XX_GIC_CPU_IF_ADDR (0xF03FE100) /* GIC within A9 */
> +
> +typedef struct NPCM7xxState {
> + DeviceState parent;
> +
> + ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS];
> + A9MPPrivState a9mpcore;
> +
> + MemoryRegion sram;
> + MemoryRegion irom;
> + MemoryRegion *dram;
> +
> + NPCM7xxGCRState gcr;
> + NPCM7xxCLKState clk;
> + NPCM7xxTimerCtrlState tim[3];
> +} NPCM7xxState;
> +
> +#define TYPE_NPCM7XX "npcm7xx"
> +#define NPCM7XX(obj) OBJECT_CHECK(NPCM7xxState, (obj), TYPE_NPCM7XX)
> +
> +#define TYPE_NPCM730 "npcm730"
> +#define TYPE_NPCM750 "npcm750"
> +
> +typedef struct NPCM7xxClass {
> + DeviceClass parent;
> +
> + /* Bitmask of modules that are permanently disabled on this chip. */
> + uint32_t disabled_modules;
> + /* Number of CPU cores enabled in this SoC class (may be 1 or 2). */
> + uint32_t num_cpus;
> +} NPCM7xxClass;
> +
> +#define NPCM7XX_CLASS(klass) \
> + OBJECT_CLASS_CHECK(NPCM7xxClass, (klass), TYPE_NPCM7XX)
> +#define NPCM7XX_GET_CLASS(obj) \
> + OBJECT_GET_CLASS(NPCM7xxClass, (obj), TYPE_NPCM7XX)
> +
> +/**
> + * npcm7xx_write_secondary_boot - Write stub for booting secondary CPU.
> + * @cpu: The CPU to be booted.
> + * @info: Boot info structure for the board.
> + *
> + * This will write a short code stub to the internal ROM that will keep the
> + * secondary CPU spinning until the primary CPU writes an address to the SCRPAD
> + * register in the GCR, after which the secondary CPU will jump there.
> + */
> +extern void npcm7xx_write_secondary_boot(ARMCPU *cpu,
> + const struct arm_boot_info *info);
> +
> +#endif /* NPCM7XX_H */
>
© 2016 - 2026 Red Hat, Inc.