Arm queue; some of the simpler stuff, things other have reviewed (thanks!), etc. -- PMM The following changes since commit 5d2f557b47dfbf8f23277a5bdd8473d4607c681a: Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging (2020-06-05 13:53:05 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200605 for you to fetch changes up to 2c35a39eda0b16c2ed85c94cec204bf5efb97812: target/arm: Convert Neon one-register-and-immediate insns to decodetree (2020-06-05 17:23:10 +0100) ---------------------------------------------------------------- target-arm queue: hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() target/arm: Convert crypto insns to gvec hw/adc/stm32f2xx_adc: Correct memory region size and access size tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system: Document Aspeed boards raspi: Add model of the USB controller target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree ---------------------------------------------------------------- Cédric Le Goater (1): docs/system: Document Aspeed boards Eden Mikitas (2): hw/ssi/imx_spi: changed while statement to prevent underflow hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave Paul Zimmerman (7): raspi: add BCM2835 SOC MPHI emulation dwc-hsotg (dwc2) USB host controller register definitions dwc-hsotg (dwc2) USB host controller state definitions dwc-hsotg (dwc2) USB host controller emulation usb: add short-packet handling to usb-storage driver wire in the dwc-hsotg (dwc2) USB host controller emulation raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host Peter Maydell (9): target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree target/arm: Convert Neon narrowing shifts with op==8 to decodetree target/arm: Convert Neon narrowing shifts with op==9 to decodetree target/arm: Convert Neon VSHLL, VMOVL to decodetree target/arm: Convert VCVT fixed-point ops to decodetree target/arm: Convert Neon one-register-and-immediate insns to decodetree Philippe Mathieu-Daudé (3): hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() hw/adc/stm32f2xx_adc: Correct memory region size and access size Richard Henderson (6): target/arm: Convert aes and sm4 to gvec helpers target/arm: Convert rax1 to gvec helpers target/arm: Convert sha512 and sm3 to gvec helpers target/arm: Convert sha1 and sha256 to gvec helpers target/arm: Split helper_crypto_sha1_3reg target/arm: Split helper_crypto_sm3tt Thomas Huth (1): tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system/arm/aspeed.rst | 85 ++ docs/system/target-arm.rst | 1 + hw/usb/hcd-dwc2.h | 190 +++++ include/hw/arm/bcm2835_peripherals.h | 5 +- include/hw/misc/bcm2835_mphi.h | 44 + include/hw/usb/dwc2-regs.h | 899 ++++++++++++++++++++ target/arm/helper.h | 45 +- target/arm/translate-a64.h | 3 + target/arm/vec_internal.h | 33 + target/arm/neon-dp.decode | 214 ++++- hw/adc/stm32f2xx_adc.c | 4 +- hw/arm/bcm2835_peripherals.c | 38 +- hw/arm/pxa2xx.c | 66 +- hw/input/pxa2xx_keypad.c | 10 +- hw/misc/bcm2835_mphi.c | 191 +++++ hw/ssi/imx_spi.c | 4 +- hw/usb/dev-storage.c | 15 +- hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++ target/arm/crypto_helper.c | 267 ++++-- target/arm/translate-a64.c | 198 ++--- target/arm/translate-neon.inc.c | 796 ++++++++++++++---- target/arm/translate.c | 539 +----------- target/arm/vec_helper.c | 12 +- hw/misc/Makefile.objs | 1 + hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/trace-events | 50 ++ tests/acceptance/boot_linux_console.py | 35 +- 28 files changed, 4258 insertions(+), 910 deletions(-) create mode 100644 docs/system/arm/aspeed.rst create mode 100644 hw/usb/hcd-dwc2.h create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 include/hw/usb/dwc2-regs.h create mode 100644 target/arm/vec_internal.h create mode 100644 hw/misc/bcm2835_mphi.c create mode 100644 hw/usb/hcd-dwc2.c From: Eden Mikitas <e.mikitas@gmail.com> The while statement in question only checked if tx_burst is not 0. tx_burst is a signed int, which is assigned the value put by the guest driver in ECSPI_CONREG. The burst length can be anywhere between 1 and 4096, and since tx_burst is always decremented by 8 it could possibly underflow, causing an infinite loop. Signed-off-by: Eden Mikitas <e.mikitas@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) rx = 0; - while (tx_burst) { + while (tx_burst > 0) { uint8_t byte = tx & 0xff; DPRINTF("writing 0x%02x\n", (uint32_t)byte); -- 2.20.1 From: Eden Mikitas <e.mikitas@gmail.com> When inserting the value retrieved (rx) from the spi slave, rx is pushed to rx_fifo after being cast to uint8_t. rx_fifo is a fifo32, and the rx register the driver uses is also 32 bit. This zeroes the 24 most significant bits of rx. This proved problematic with devices that expect to use the whole 32 bits of the rx register. Signed-off-by: Eden Mikitas <e.mikitas@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) if (fifo32_is_full(&s->rx_fifo)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_RO; } else { - fifo32_push(&s->rx_fifo, (uint8_t)rx); + fifo32_push(&s->rx_fifo, rx); } if (s->burst_length <= 0) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask() (missed in commit 5a0001ec7e). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/input/pxa2xx_keypad.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/input/pxa2xx_keypad.c b/hw/input/pxa2xx_keypad.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/pxa2xx_keypad.c +++ b/hw/input/pxa2xx_keypad.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "migration/vmstate.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_keypad_read(void *opaque, hwaddr offset, return s->kpkdi; break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_keypad_write(void *opaque, hwaddr offset, break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Replace printf() calls by qemu_log_mask(), which is disabled by default. This avoid flooding the terminal when fuzzing the device. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 66 ++++++++++++++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 17 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/blockdev.h" #include "sysemu/qtest.h" #include "qemu/cutils.h" +#include "qemu/log.h" static struct { hwaddr io_base; @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_pm_read(void *opaque, hwaddr addr, return s->pm_regs[addr >> 2]; default: fail: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_pm_write(void *opaque, hwaddr addr, s->pm_regs[addr >> 2] = value; break; } - - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_cm_read(void *opaque, hwaddr addr, return s->cm_regs[CCCR >> 2] | (3 << 28); default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_cm_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_mm_read(void *opaque, hwaddr addr, return s->mm_regs[addr >> 2]; /* fall through */ default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_mm_write(void *opaque, hwaddr addr, } default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_ssp_read(void *opaque, hwaddr addr, case SSACD: return s->ssacd; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_ssp_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_rtc_read(void *opaque, hwaddr addr, else return s->last_swcr; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_i2c_read(void *opaque, hwaddr addr, s->ibmr = 0; return s->ibmr; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_i2c_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_i2s_read(void *opaque, hwaddr addr, } return 0; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_i2s_write(void *opaque, hwaddr addr, } break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_fir_read(void *opaque, hwaddr addr, case ICFOR: return s->rx_len; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_fir_write(void *opaque, hwaddr addr, case ICFOR: break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> With this conversion, we will be able to use the same helpers with sve. In particular, pass 3 vector parameters for the 3-operand operations; for advsimd the destination register is also an input. This also fixes a bug in which we failed to clear the high bits of the SVE register after an AdvSIMD operation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 6 ++-- target/arm/vec_internal.h | 33 +++++++++++++++++ target/arm/crypto_helper.c | 72 +++++++++++++++++++++++++++----------- target/arm/translate-a64.c | 55 ++++++++++++++++++----------- target/arm/translate.c | 27 +++++++------- target/arm/vec_helper.c | 12 +------ 6 files changed, 138 insertions(+), 67 deletions(-) create mode 100644 target/arm/vec_internal.h diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(neon_qzip8, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_2(neon_qzip16, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_2(neon_qzip32, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) diff --git a/target/arm/vec_internal.h b/target/arm/vec_internal.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_internal.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Helpers + * + * Copyright (c) 2020 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARM_VEC_INTERNALS_H +#define TARGET_ARM_VEC_INTERNALS_H + +static inline void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + +#endif /* TARGET_ARM_VEC_INTERNALS_H */ diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" #include "crypto/aes.h" +#include "vec_internal.h" union CRYPTO_STATE { uint8_t bytes[16]; @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { #define CR_ST_WORD(state, i) (state.words[i]) #endif -void HELPER(crypto_aese)(void *vd, void *vm, uint32_t decrypt) +static void do_crypto_aese(uint64_t *rd, uint64_t *rn, + uint64_t *rm, bool decrypt) { static uint8_t const * const sbox[2] = { AES_sbox, AES_isbox }; static uint8_t const * const shift[2] = { AES_shifts, AES_ishifts }; - uint64_t *rd = vd; - uint64_t *rm = vm; union CRYPTO_STATE rk = { .l = { rm[0], rm[1] } }; - union CRYPTO_STATE st = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE st = { .l = { rn[0], rn[1] } }; int i; - assert(decrypt < 2); - /* xor state vector with round key */ rk.l[0] ^= st.l[0]; rk.l[1] ^= st.l[1]; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aese)(void *vd, void *vm, uint32_t decrypt) rd[1] = st.l[1]; } -void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) +void HELPER(crypto_aese)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + bool decrypt = simd_data(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_aese(vd + i, vn + i, vm + i, decrypt); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + +static void do_crypto_aesmc(uint64_t *rd, uint64_t *rm, bool decrypt) { static uint32_t const mc[][256] = { { /* MixColumns lookup table */ @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) 0xbe805d9f, 0xb58d5491, 0xa89a4f83, 0xa397468d, } }; - uint64_t *rd = vd; - uint64_t *rm = vm; union CRYPTO_STATE st = { .l = { rm[0], rm[1] } }; int i; - assert(decrypt < 2); - for (i = 0; i < 16; i += 4) { CR_ST_WORD(st, i >> 2) = mc[decrypt][CR_ST_BYTE(st, i)] ^ @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) rd[1] = st.l[1]; } +void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + bool decrypt = simd_data(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_aesmc(vd + i, vm + i, decrypt); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + /* * SHA-1 logical functions */ @@ -XXX,XX +XXX,XX @@ static uint8_t const sm4_sbox[] = { 0x79, 0xee, 0x5f, 0x3e, 0xd7, 0xcb, 0x39, 0x48, }; -void HELPER(crypto_sm4e)(void *vd, void *vn) +static void do_crypto_sm4e(uint64_t *rd, uint64_t *rn, uint64_t *rm) { - uint64_t *rd = vd; - uint64_t *rn = vn; - union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; - union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE d = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE n = { .l = { rm[0], rm[1] } }; uint32_t t, i; for (i = 0; i < 4; i++) { @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4e)(void *vd, void *vn) rd[1] = d.l[1]; } -void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) +void HELPER(crypto_sm4e)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_sm4e(vd + i, vn + i, vm + i); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + +static void do_crypto_sm4ekey(uint64_t *rd, uint64_t *rn, uint64_t *rm) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) rd[0] = d.l[0]; rd[1] = d.l[1]; } + +void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_sm4ekey(vd + i, vn + i, vm + i); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_fn4(DisasContext *s, bool is_q, int rd, int rn, int rm, is_q ? 16 : 8, vec_full_reg_size(s)); } +/* Expand a 2-operand operation using an out-of-line helper. */ +static void gen_gvec_op2_ool(DisasContext *s, bool is_q, int rd, + int rn, int data, gen_helper_gvec_2 *fn) +{ + tcg_gen_gvec_2_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); +} + /* Expand a 3-operand operation using an out-of-line helper. */ static void gen_gvec_op3_ool(DisasContext *s, bool is_q, int rd, int rn, int rm, int data, gen_helper_gvec_3 *fn) @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); int decrypt; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; - TCGv_i32 tcg_decrypt; - CryptoThreeOpIntFn *genfn; + gen_helper_gvec_2 *genfn2 = NULL; + gen_helper_gvec_3 *genfn3 = NULL; if (!dc_isar_feature(aa64_aes, s) || size != 0) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) switch (opcode) { case 0x4: /* AESE */ decrypt = 0; - genfn = gen_helper_crypto_aese; + genfn3 = gen_helper_crypto_aese; break; case 0x6: /* AESMC */ decrypt = 0; - genfn = gen_helper_crypto_aesmc; + genfn2 = gen_helper_crypto_aesmc; break; case 0x5: /* AESD */ decrypt = 1; - genfn = gen_helper_crypto_aese; + genfn3 = gen_helper_crypto_aese; break; case 0x7: /* AESIMC */ decrypt = 1; - genfn = gen_helper_crypto_aesmc; + genfn2 = gen_helper_crypto_aesmc; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_decrypt = tcg_const_i32(decrypt); - - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_decrypt); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_i32(tcg_decrypt); + if (genfn2) { + gen_gvec_op2_ool(s, true, rd, rn, decrypt, genfn2); + } else { + gen_gvec_op3_ool(s, true, rd, rd, rn, decrypt, genfn3); + } } /* Crypto three-reg SHA @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool feature; - CryptoThreeOpFn *genfn; + CryptoThreeOpFn *genfn = NULL; + gen_helper_gvec_3 *oolfn = NULL; if (o == 0) { switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; case 2: /* SM4EKEY */ feature = dc_isar_feature(aa64_sm4, s); - genfn = gen_helper_crypto_sm4ekey; + oolfn = gen_helper_crypto_sm4ekey; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) return; } + if (oolfn) { + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); + return; + } + if (genfn) { TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; bool feature; CryptoTwoOpFn *genfn; + gen_helper_gvec_3 *oolfn = NULL; switch (opcode) { case 0: /* SHA512SU0 */ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) break; case 1: /* SM4E */ feature = dc_isar_feature(aa64_sm4, s); - genfn = gen_helper_crypto_sm4e; + oolfn = gen_helper_crypto_sm4e; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) return; } + if (oolfn) { + gen_gvec_op3_ool(s, true, rd, rd, rn, 0, oolfn); + return; + } + tcg_rd_ptr = vec_full_reg_ptr(s, rd); tcg_rn_ptr = vec_full_reg_ptr(s, rn); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa32_aes, s) || ((rm | rd) & 1)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - - /* Bit 6 is the lowest opcode bit; it distinguishes between - * encryption (AESE/AESMC) and decryption (AESD/AESIMC) - */ - tmp3 = tcg_const_i32(extract32(insn, 6, 1)); - + /* + * Bit 6 is the lowest opcode bit; it distinguishes + * between encryption (AESE/AESMC) and decryption + * (AESD/AESIMC). + */ if (op == NEON_2RM_AESE) { - gen_helper_crypto_aese(ptr1, ptr2, tmp3); + tcg_gen_gvec_3_ool(vfp_reg_offset(true, rd), + vfp_reg_offset(true, rd), + vfp_reg_offset(true, rm), + 16, 16, extract32(insn, 6, 1), + gen_helper_crypto_aese); } else { - gen_helper_crypto_aesmc(ptr1, ptr2, tmp3); + tcg_gen_gvec_2_ool(vfp_reg_offset(true, rd), + vfp_reg_offset(true, rm), + 16, 16, extract32(insn, 6, 1), + gen_helper_crypto_aesmc); } - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_i32(tmp3); break; case NEON_2RM_SHA1H: if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" #include "fpu/softfloat.h" - +#include "vec_internal.h" /* Note that vector data is stored in host-endian 64-bit chunks, so addressing units smaller than that needs a host-endian fixup. */ @@ -XXX,XX +XXX,XX @@ #define H4(x) (x) #endif -static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) -{ - uint64_t *d = vd + opr_sz; - uintptr_t i; - - for (i = opr_sz; i < max_sz; i += 8) { - *d++ = 0; - } -} - /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static int16_t inl_qrdmlah_s16(int16_t src1, int16_t src2, int16_t src3, uint32_t *sat) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> With this conversion, we will be able to use the same helpers with sve. This also fixes a bug in which we failed to clear the high bits of the SVE register after an AdvSIMD operation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 ++ target/arm/translate-a64.h | 3 ++ target/arm/crypto_helper.c | 11 +++++++ target/arm/translate-a64.c | 59 ++++++++++++++++++++------------------ 4 files changed, 47 insertions(+), 28 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_rax1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int vec_full_reg_size(DisasContext *s) bool disas_sve(DisasContext *, uint32_t); +void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, + uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz); + #endif /* TARGET_ARM_TRANSLATE_A64_H */ diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm, uint32_t desc) } clear_tail(vd, opr_sz, simd_maxsz(desc)); } + +void HELPER(crypto_rax1)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + uint64_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 8; ++i) { + d[i] = n[i] ^ rol64(m[i], 1); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); } +static void gen_rax1_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m) +{ + tcg_gen_rotli_i64(d, m, 1); + tcg_gen_xor_i64(d, d, n); +} + +static void gen_rax1_vec(unsigned vece, TCGv_vec d, TCGv_vec n, TCGv_vec m) +{ + tcg_gen_rotli_vec(vece, d, m, 1); + tcg_gen_xor_vec(vece, d, d, n); +} + +void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, + uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz) +{ + static const TCGOpcode vecop_list[] = { INDEX_op_rotli_vec, 0 }; + static const GVecGen3 op = { + .fni8 = gen_rax1_i64, + .fniv = gen_rax1_vec, + .opt_opc = vecop_list, + .fno = gen_helper_crypto_rax1, + .vece = MO_64, + }; + tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz, &op); +} + /* Crypto three-reg SHA512 * 31 21 20 16 15 14 13 12 11 10 9 5 4 0 * +-----------------------+------+---+---+-----+--------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) bool feature; CryptoThreeOpFn *genfn = NULL; gen_helper_gvec_3 *oolfn = NULL; + GVecGen3Fn *gvecfn = NULL; if (o == 0) { switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; case 3: /* RAX1 */ feature = dc_isar_feature(aa64_sha3, s); - genfn = NULL; + gvecfn = gen_gvec_rax1; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) if (oolfn) { gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); - return; - } - - if (genfn) { + } else if (gvecfn) { + gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); + } else { TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; tcg_rd_ptr = vec_full_reg_ptr(s, rd); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rd_ptr); tcg_temp_free_ptr(tcg_rn_ptr); tcg_temp_free_ptr(tcg_rm_ptr); - } else { - TCGv_i64 tcg_op1, tcg_op2, tcg_res[2]; - int pass; - - tcg_op1 = tcg_temp_new_i64(); - tcg_op2 = tcg_temp_new_i64(); - tcg_res[0] = tcg_temp_new_i64(); - tcg_res[1] = tcg_temp_new_i64(); - - for (pass = 0; pass < 2; pass++) { - read_vec_element(s, tcg_op1, rn, pass, MO_64); - read_vec_element(s, tcg_op2, rm, pass, MO_64); - - tcg_gen_rotli_i64(tcg_res[pass], tcg_op2, 1); - tcg_gen_xor_i64(tcg_res[pass], tcg_res[pass], tcg_op1); - } - write_vec_element(s, tcg_res[0], rd, 0, MO_64); - write_vec_element(s, tcg_res[1], rd, 1, MO_64); - - tcg_temp_free_i64(tcg_op1); - tcg_temp_free_i64(tcg_op2); - tcg_temp_free_i64(tcg_res[0]); - tcg_temp_free_i64(tcg_res[1]); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not yet convert the helpers to loop over opr_sz, but the descriptor allows the vector tail to be cleared. Which fixes an existing bug vs SVE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 15 +++++++----- target/arm/crypto_helper.c | 37 +++++++++++++++++++++++----- target/arm/translate-a64.c | 50 ++++++++++++-------------------------- 3 files changed, 55 insertions(+), 47 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha512su1, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) -DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sm3partw1, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3partw2, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { #define CR_ST_WORD(state, i) (state.words[i]) #endif +/* + * The caller has not been converted to full gvec, and so only + * modifies the low 16 bytes of the vector register. + */ +static void clear_tail_16(void *vd, uint32_t desc) +{ + int opr_sz = simd_oprsz(desc); + int max_sz = simd_maxsz(desc); + + assert(opr_sz == 16); + clear_tail(vd, opr_sz, max_sz); +} + static void do_crypto_aese(uint64_t *rd, uint64_t *rn, uint64_t *rm, bool decrypt) { @@ -XXX,XX +XXX,XX @@ static uint64_t s1_512(uint64_t x) return ror64(x, 19) ^ ror64(x, 61) ^ (x >> 6); } -void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512su0)(void *vd, void *vn) +void HELPER(crypto_sha512su0)(void *vd, void *vn, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su0)(void *vd, void *vn) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) rd[0] += s1_512(rn[0]) + rm[0]; rd[1] += s1_512(rn[1]) + rm[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool feature; - CryptoThreeOpFn *genfn = NULL; gen_helper_gvec_3 *oolfn = NULL; GVecGen3Fn *gvecfn = NULL; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SHA512H */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512h; + oolfn = gen_helper_crypto_sha512h; break; case 1: /* SHA512H2 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512h2; + oolfn = gen_helper_crypto_sha512h2; break; case 2: /* SHA512SU1 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512su1; + oolfn = gen_helper_crypto_sha512su1; break; case 3: /* RAX1 */ feature = dc_isar_feature(aa64_sha3, s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SM3PARTW1 */ feature = dc_isar_feature(aa64_sm3, s); - genfn = gen_helper_crypto_sm3partw1; + oolfn = gen_helper_crypto_sm3partw1; break; case 1: /* SM3PARTW2 */ feature = dc_isar_feature(aa64_sm3, s); - genfn = gen_helper_crypto_sm3partw2; + oolfn = gen_helper_crypto_sm3partw2; break; case 2: /* SM4EKEY */ feature = dc_isar_feature(aa64_sm4, s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) if (oolfn) { gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); - } else if (gvecfn) { - gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); } else { - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); + gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); } } @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) int opcode = extract32(insn, 10, 2); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; bool feature; - CryptoTwoOpFn *genfn; - gen_helper_gvec_3 *oolfn = NULL; switch (opcode) { case 0: /* SHA512SU0 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512su0; break; case 1: /* SM4E */ feature = dc_isar_feature(aa64_sm4, s); - oolfn = gen_helper_crypto_sm4e; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) return; } - if (oolfn) { - gen_gvec_op3_ool(s, true, rd, rd, rn, 0, oolfn); - return; + switch (opcode) { + case 0: /* SHA512SU0 */ + gen_gvec_op2_ool(s, true, rd, rn, 0, gen_helper_crypto_sha512su0); + break; + case 1: /* SM4E */ + gen_gvec_op3_ool(s, true, rd, rd, rn, 0, gen_helper_crypto_sm4e); + break; + default: + g_assert_not_reached(); } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - - genfn(tcg_rd_ptr, tcg_rn_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); } /* Crypto four-register -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not yet convert the helpers to loop over opr_sz, but the descriptor allows the vector tail to be cleared. Which fixes an existing bug vs SVE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 12 ++-- target/arm/neon-dp.decode | 12 ++-- target/arm/crypto_helper.c | 24 +++++-- target/arm/translate-a64.c | 34 ++++----- target/arm/translate-neon.inc.c | 124 +++++--------------------------- target/arm/translate.c | 24 ++----- 6 files changed, 67 insertions(+), 163 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) -DEF_HELPER_FLAGS_2(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(crypto_sha256h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sha256h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VPADD_3s 1111 001 0 0 . .. .... .... 1011 . . . 1 .... @3same_q0 VQRDMLAH_3s 1111 001 1 0 . .. .... .... 1011 ... 1 .... @3same +@3same_crypto .... .... .... .... .... .... .... .... \ + &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=0 q=1 + SHA1_3s 1111 001 0 0 . optype:2 .... .... 1100 . 1 . 0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto VFMA_fp_3s 1111 001 0 0 . 0 . .... .... 1100 ... 1 .... @3same_fp VFMS_fp_3s 1111 001 0 0 . 1 . .... .... 1100 ... 1 .... @3same_fp diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1_3reg)(void *vd, void *vn, void *vm, uint32_t op) rd[1] = d.l[1]; } -void HELPER(crypto_sha1h)(void *vd, void *vm) +void HELPER(crypto_sha1h)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1h)(void *vd, void *vm) rd[0] = m.l[0]; rd[1] = m.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha1su1)(void *vd, void *vm) +void HELPER(crypto_sha1su1)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1su1)(void *vd, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } /* @@ -XXX,XX +XXX,XX @@ static uint32_t s1(uint32_t x) return ror32(x, 17) ^ ror32(x, 19) ^ (x >> 10); } -void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256su0)(void *vd, void *vm) +void HELPER(crypto_sha256su0)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su0)(void *vd, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) int rm = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - CryptoThreeOpFn *genfn; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; + gen_helper_gvec_3 *genfn; bool feature; if (size != 0) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) return; } - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - if (genfn) { - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); } else { TCGv_i32 tcg_opcode = tcg_const_i32(opcode); + TCGv_ptr tcg_rd_ptr = vec_full_reg_ptr(s, rd); + TCGv_ptr tcg_rn_ptr = vec_full_reg_ptr(s, rn); + TCGv_ptr tcg_rm_ptr = vec_full_reg_ptr(s, rm); gen_helper_crypto_sha1_3reg(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_opcode); - tcg_temp_free_i32(tcg_opcode); - } - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); + tcg_temp_free_i32(tcg_opcode); + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); + tcg_temp_free_ptr(tcg_rm_ptr); + } } /* Crypto two-reg SHA @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) int opcode = extract32(insn, 12, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - CryptoTwoOpFn *genfn; + gen_helper_gvec_2 *genfn; bool feature; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; if (size != 0) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - - genfn(tcg_rd_ptr, tcg_rn_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); + gen_gvec_op2_ool(s, true, rd, rn, 0, genfn); } static void gen_rax1_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m) diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_3SAME_CMP(VCGE_S, TCG_COND_GE) DO_3SAME_CMP(VCGE_U, TCG_COND_GEU) DO_3SAME_CMP(VCEQ, TCG_COND_EQ) -static void gen_VMUL_p_3s(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, - uint32_t rm_ofs, uint32_t oprsz, uint32_t maxsz) -{ - tcg_gen_gvec_3_ool(rd_ofs, rn_ofs, rm_ofs, oprsz, maxsz, - 0, gen_helper_gvec_pmul_b); -} +#define WRAP_OOL_FN(WRAPNAME, FUNC) \ + static void WRAPNAME(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, \ + uint32_t rm_ofs, uint32_t oprsz, uint32_t maxsz) \ + { \ + tcg_gen_gvec_3_ool(rd_ofs, rn_ofs, rm_ofs, oprsz, maxsz, 0, FUNC); \ + } + +WRAP_OOL_FN(gen_VMUL_p_3s, gen_helper_gvec_pmul_b) static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a) { @@ -XXX,XX +XXX,XX @@ static bool trans_SHA1_3s(DisasContext *s, arg_SHA1_3s *a) return true; } -static bool trans_SHA256H_3s(DisasContext *s, arg_SHA256H_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; +#define DO_SHA2(NAME, FUNC) \ + WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ + static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \ + { \ + if (!dc_isar_feature(aa32_sha2, s)) { \ + return false; \ + } \ + return do_3same(s, a, gen_##NAME##_3s); \ } - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256h(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} - -static bool trans_SHA256H2_3s(DisasContext *s, arg_SHA256H2_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256h2(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} - -static bool trans_SHA256SU1_3s(DisasContext *s, arg_SHA256SU1_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256su1(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} +DO_SHA2(SHA256H, gen_helper_crypto_sha256h) +DO_SHA2(SHA256H2, gen_helper_crypto_sha256h2) +DO_SHA2(SHA256SU1, gen_helper_crypto_sha256su1) #define DO_3SAME_64(INSN, FUNC) \ static void gen_##INSN##_3s(unsigned vece, uint32_t rd_ofs, \ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int vec_size; uint32_t imm; TCGv_i32 tmp, tmp2, tmp3, tmp4, tmp5; - TCGv_ptr ptr1, ptr2; + TCGv_ptr ptr1; TCGv_i64 tmp64; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - - gen_helper_crypto_sha1h(ptr1, ptr2); - - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, + gen_helper_crypto_sha1h); break; case NEON_2RM_SHA1SU1: if ((rm | rd) & 1) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } else if (!dc_isar_feature(aa32_sha1, s)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - if (q) { - gen_helper_crypto_sha256su0(ptr1, ptr2); - } else { - gen_helper_crypto_sha1su1(ptr1, ptr2); - } - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, + q ? gen_helper_crypto_sha256su0 + : gen_helper_crypto_sha1su1); break; - case NEON_2RM_VMVN: tcg_gen_gvec_not(0, rd_ofs, rm_ofs, vec_size, vec_size); break; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than passing an opcode to a helper, fully decode the operation at translate time. Use clear_tail_16 to zap the balance of the SVE register with the AdvSIMD write. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 +- target/arm/neon-dp.decode | 6 +- target/arm/crypto_helper.c | 99 +++++++++++++++++++++------------ target/arm/translate-a64.c | 29 ++++------ target/arm/translate-neon.inc.c | 46 ++++----------- 5 files changed, 93 insertions(+), 92 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(neon_qzip32, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1su0, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1c, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1p, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1m, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr, i32) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VQRDMLAH_3s 1111 001 1 0 . .. .... .... 1011 ... 1 .... @3same @3same_crypto .... .... .... .... .... .... .... .... \ &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=0 q=1 -SHA1_3s 1111 001 0 0 . optype:2 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +SHA1C_3s 1111 001 0 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1P_3s 1111 001 0 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1M_3s 1111 001 0 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1SU0_3s 1111 001 0 0 . 11 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { }; #ifdef HOST_WORDS_BIGENDIAN -#define CR_ST_BYTE(state, i) (state.bytes[(15 - (i)) ^ 8]) -#define CR_ST_WORD(state, i) (state.words[(3 - (i)) ^ 2]) +#define CR_ST_BYTE(state, i) ((state).bytes[(15 - (i)) ^ 8]) +#define CR_ST_WORD(state, i) ((state).words[(3 - (i)) ^ 2]) #else -#define CR_ST_BYTE(state, i) (state.bytes[i]) -#define CR_ST_WORD(state, i) (state.words[i]) +#define CR_ST_BYTE(state, i) ((state).bytes[i]) +#define CR_ST_WORD(state, i) ((state).words[i]) #endif /* @@ -XXX,XX +XXX,XX @@ static uint32_t maj(uint32_t x, uint32_t y, uint32_t z) return (x & y) | ((x | y) & z); } -void HELPER(crypto_sha1_3reg)(void *vd, void *vn, void *vm, uint32_t op) +void HELPER(crypto_sha1su0)(void *vd, void *vn, void *vm, uint32_t desc) +{ + uint64_t *d = vd, *n = vn, *m = vm; + uint64_t d0, d1; + + d0 = d[1] ^ d[0] ^ m[0]; + d1 = n[0] ^ d[1] ^ m[1]; + d[0] = d0; + d[1] = d1; + + clear_tail_16(vd, desc); +} + +static inline void crypto_sha1_3reg(uint64_t *rd, uint64_t *rn, + uint64_t *rm, uint32_t desc, + uint32_t (*fn)(union CRYPTO_STATE *d)) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + int i; - if (op == 3) { /* sha1su0 */ - d.l[0] ^= d.l[1] ^ m.l[0]; - d.l[1] ^= n.l[0] ^ m.l[1]; - } else { - int i; + for (i = 0; i < 4; i++) { + uint32_t t = fn(&d); - for (i = 0; i < 4; i++) { - uint32_t t; + t += rol32(CR_ST_WORD(d, 0), 5) + CR_ST_WORD(n, 0) + + CR_ST_WORD(m, i); - switch (op) { - case 0: /* sha1c */ - t = cho(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - case 1: /* sha1p */ - t = par(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - case 2: /* sha1m */ - t = maj(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - default: - g_assert_not_reached(); - } - t += rol32(CR_ST_WORD(d, 0), 5) + CR_ST_WORD(n, 0) - + CR_ST_WORD(m, i); - - CR_ST_WORD(n, 0) = CR_ST_WORD(d, 3); - CR_ST_WORD(d, 3) = CR_ST_WORD(d, 2); - CR_ST_WORD(d, 2) = ror32(CR_ST_WORD(d, 1), 2); - CR_ST_WORD(d, 1) = CR_ST_WORD(d, 0); - CR_ST_WORD(d, 0) = t; - } + CR_ST_WORD(n, 0) = CR_ST_WORD(d, 3); + CR_ST_WORD(d, 3) = CR_ST_WORD(d, 2); + CR_ST_WORD(d, 2) = ror32(CR_ST_WORD(d, 1), 2); + CR_ST_WORD(d, 1) = CR_ST_WORD(d, 0); + CR_ST_WORD(d, 0) = t; } rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(rd, desc); +} + +static uint32_t do_sha1c(union CRYPTO_STATE *d) +{ + return cho(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1c)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1c); +} + +static uint32_t do_sha1p(union CRYPTO_STATE *d) +{ + return par(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1p)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1p); +} + +static uint32_t do_sha1m(union CRYPTO_STATE *d) +{ + return maj(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1m)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1m); } void HELPER(crypto_sha1h)(void *vd, void *vm, uint32_t desc) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SHA1C */ + genfn = gen_helper_crypto_sha1c; + feature = dc_isar_feature(aa64_sha1, s); + break; case 1: /* SHA1P */ + genfn = gen_helper_crypto_sha1p; + feature = dc_isar_feature(aa64_sha1, s); + break; case 2: /* SHA1M */ + genfn = gen_helper_crypto_sha1m; + feature = dc_isar_feature(aa64_sha1, s); + break; case 3: /* SHA1SU0 */ - genfn = NULL; + genfn = gen_helper_crypto_sha1su0; feature = dc_isar_feature(aa64_sha1, s); break; case 4: /* SHA256H */ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - if (genfn) { - gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); - } else { - TCGv_i32 tcg_opcode = tcg_const_i32(opcode); - TCGv_ptr tcg_rd_ptr = vec_full_reg_ptr(s, rd); - TCGv_ptr tcg_rn_ptr = vec_full_reg_ptr(s, rn); - TCGv_ptr tcg_rm_ptr = vec_full_reg_ptr(s, rm); - - gen_helper_crypto_sha1_3reg(tcg_rd_ptr, tcg_rn_ptr, - tcg_rm_ptr, tcg_opcode); - - tcg_temp_free_i32(tcg_opcode); - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); - } + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); } /* Crypto two-reg SHA diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a) DO_VQRDMLAH(VQRDMLAH, gen_gvec_sqrdmlah_qc) DO_VQRDMLAH(VQRDMLSH, gen_gvec_sqrdmlsh_qc) -static bool trans_SHA1_3s(DisasContext *s, arg_SHA1_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - TCGv_i32 tmp; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha1, s)) { - return false; +#define DO_SHA1(NAME, FUNC) \ + WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ + static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \ + { \ + if (!dc_isar_feature(aa32_sha1, s)) { \ + return false; \ + } \ + return do_3same(s, a, gen_##NAME##_3s); \ } - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - tmp = tcg_const_i32(a->optype); - gen_helper_crypto_sha1_3reg(ptr1, ptr2, ptr3, tmp); - tcg_temp_free_i32(tmp); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} +DO_SHA1(SHA1C, gen_helper_crypto_sha1c) +DO_SHA1(SHA1P, gen_helper_crypto_sha1p) +DO_SHA1(SHA1M, gen_helper_crypto_sha1m) +DO_SHA1(SHA1SU0, gen_helper_crypto_sha1su0) #define DO_SHA2(NAME, FUNC) \ WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than passing an opcode to a helper, fully decode the operation at translate time. Use clear_tail_16 to zap the balance of the SVE register with the AdvSIMD write. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 ++++- target/arm/crypto_helper.c | 24 ++++++++++++++++++------ target/arm/translate-a64.c | 21 +++++---------------- 3 files changed, 27 insertions(+), 23 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) -DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt1a, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt1b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt2a, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt2b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm3partw2, TCG_CALL_NO_RWG, diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm, uint32_t desc) clear_tail_16(vd, desc); } -void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, - uint32_t opcode) +static inline void QEMU_ALWAYS_INLINE +crypto_sm3tt(uint64_t *rd, uint64_t *rn, uint64_t *rm, + uint32_t desc, uint32_t opcode) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t imm2 = simd_data(desc); uint32_t t; assert(imm2 < 4); @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, /* SM3TT2B */ t = cho(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); } else { - g_assert_not_reached(); + qemu_build_not_reached(); } t += CR_ST_WORD(d, 0) + CR_ST_WORD(m, imm2); @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(rd, desc); } +#define DO_SM3TT(NAME, OPCODE) \ + void HELPER(NAME)(void *vd, void *vn, void *vm, uint32_t desc) \ + { crypto_sm3tt(vd, vn, vm, desc, OPCODE); } + +DO_SM3TT(crypto_sm3tt1a, 0) +DO_SM3TT(crypto_sm3tt1b, 1) +DO_SM3TT(crypto_sm3tt2a, 2) +DO_SM3TT(crypto_sm3tt2b, 3) + +#undef DO_SM3TT + static uint8_t const sm4_sbox[] = { 0xd6, 0x90, 0xe9, 0xfe, 0xcc, 0xe1, 0x3d, 0xb7, 0x16, 0xb6, 0x14, 0xc2, 0x28, 0xfb, 0x2c, 0x05, diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_xar(DisasContext *s, uint32_t insn) */ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) { + static gen_helper_gvec_3 * const fns[4] = { + gen_helper_crypto_sm3tt1a, gen_helper_crypto_sm3tt1b, + gen_helper_crypto_sm3tt2a, gen_helper_crypto_sm3tt2b, + }; int opcode = extract32(insn, 10, 2); int imm2 = extract32(insn, 12, 2); int rm = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; - TCGv_i32 tcg_imm2, tcg_opcode; if (!dc_isar_feature(aa64_sm3, s)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) return; } - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - tcg_imm2 = tcg_const_i32(imm2); - tcg_opcode = tcg_const_i32(opcode); - - gen_helper_crypto_sm3tt(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_imm2, - tcg_opcode); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); - tcg_temp_free_i32(tcg_imm2); - tcg_temp_free_i32(tcg_opcode); + gen_gvec_op3_ool(s, true, rd, rn, rm, imm2, fns[opcode]); } /* C3.6 Data processing - SIMD, inc Crypto -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The ADC region size is 256B, split as: - [0x00 - 0x4f] defined - [0x50 - 0xff] reserved All registers are 32-bit (thus when the datasheet mentions the last defined register is 0x4c, it means its address range is 0x4c .. 0x4f. This model implementation is also 32-bit. Set MemoryRegionOps 'impl' fields. See: 'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map". Reported-by: Seth Kintigh <skintigh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200603055915.17678-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/adc/stm32f2xx_adc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/adc/stm32f2xx_adc.c b/hw/adc/stm32f2xx_adc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/adc/stm32f2xx_adc.c +++ b/hw/adc/stm32f2xx_adc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps stm32f2xx_adc_ops = { .read = stm32f2xx_adc_read, .write = stm32f2xx_adc_write, .endianness = DEVICE_NATIVE_ENDIAN, + .impl.min_access_size = 4, + .impl.max_access_size = 4, }; static const VMStateDescription vmstate_stm32f2xx_adc = { @@ -XXX,XX +XXX,XX @@ static void stm32f2xx_adc_init(Object *obj) sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); memory_region_init_io(&s->mmio, obj, &stm32f2xx_adc_ops, s, - TYPE_STM32F2XX_ADC, 0xFF); + TYPE_STM32F2XX_ADC, 0x100); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); } -- 2.20.1 From: Thomas Huth <thuth@redhat.com> As described by Edgar here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html we can use the Ubuntu kernel for testing the xlnx-versal-virt machine. So let's add a boot test for this now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200525141237.15243-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(LinuxKernelTest): console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + def test_aarch64_xlnx_versal_virt(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:xlnx-versal-virt + :avocado: tags=device:pl011 + :avocado: tags=device:arm_gicv3 + """ + kernel_url = ('http://ports.ubuntu.com/ubuntu-ports/dists/' + 'bionic-updates/main/installer-arm64/current/images/' + 'netboot/ubuntu-installer/arm64/linux') + kernel_hash = '5bfc54cf7ed8157d93f6e5b0241e727b6dc22c50' + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) + + initrd_url = ('http://ports.ubuntu.com/ubuntu-ports/dists/' + 'bionic-updates/main/installer-arm64/current/images/' + 'netboot/ubuntu-installer/arm64/initrd.gz') + initrd_hash = 'd385d3e88d53e2004c5d43cbe668b458a094f772' + initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash) + + self.vm.set_console() + self.vm.add_args('-m', '2G', + '-kernel', kernel_path, + '-initrd', initrd_path) + self.vm.launch() + self.wait_for_console_pattern('Checked W+X mappings: passed') + def test_arm_virt(self): """ :avocado: tags=arch:arm -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200602135050.593692-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 85 ++++++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 86 insertions(+) create mode 100644 docs/system/arm/aspeed.rst diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ +Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``) +================================================================== + +The QEMU Aspeed machines model BMCs of various OpenPOWER systems and +Aspeed evaluation boards. They are based on different releases of the +Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the +AST2500 with an ARM1176JZS CPU (800MHz) and more recently the AST2600 +with dual cores ARM Cortex A7 CPUs (1.2GHz). + +The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C, +etc. + +AST2400 SoC based machines : + +- ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC + +AST2500 SoC based machines : + +- ``ast2500-evb`` Aspeed AST2500 Evaluation board +- ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC +- ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC +- ``sonorapass-bmc`` OCP SonoraPass BMC +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 + +AST2600 SoC based machines : + +- ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex A7) +- ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC + +Supported devices +----------------- + + * SMP (for the AST2600 Cortex-A7) + * Interrupt Controller (VIC) + * Timer Controller + * RTC Controller + * I2C Controller + * System Control Unit (SCU) + * SRAM mapping + * X-DMA Controller (basic interface) + * Static Memory Controller (SMC or FMC) - Only SPI Flash support + * SPI Memory Controller + * USB 2.0 Controller + * SD/MMC storage controllers + * SDRAM controller (dummy interface for basic settings and training) + * Watchdog Controller + * GPIO Controller (Master only) + * UART + * Ethernet controllers + + +Missing devices +--------------- + + * Coprocessor support + * ADC (out of tree implementation) + * PWM and Fan Controller + * LPC Bus Controller + * Slave GPIO Controller + * Super I/O Controller + * Hash/Crypto Engine + * PCI-Express 1 Controller + * Graphic Display Controller + * PECI Controller + * MCTP Controller + * Mailbox Controller + * Virtual UART + * eSPI Controller + * I3C Controller + +Boot options +------------ + +The Aspeed machines can be started using the -kernel option to load a +Linux kernel or from a firmare image which can be downloaded from the +OpenPOWER jenkins : + + https://openpower.xyz/ + +The image should be attached as an MTD drive. Run : + +.. code-block:: bash + + $ qemu-system-arm -M romulus-bmc -nic user \ + -drive file=flash-romulus,format=raw,if=mtd -nographic diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/realview arm/versatile arm/vexpress + arm/aspeed arm/musicpal arm/nseries arm/orangepi -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add BCM2835 SOC MPHI (Message-based Parallel Host Interface) emulation. It is very basic, only providing the FIQ interrupt needed to allow the dwc-otg USB host controller driver in the Raspbian kernel to function. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200520235349.21215-2-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 2 + include/hw/misc/bcm2835_mphi.h | 44 ++++++ hw/arm/bcm2835_peripherals.c | 17 +++ hw/misc/bcm2835_mphi.c | 191 +++++++++++++++++++++++++++ hw/misc/Makefile.objs | 1 + 5 files changed, 255 insertions(+) create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 hw/misc/bcm2835_mphi.c diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_property.h" #include "hw/misc/bcm2835_rng.h" #include "hw/misc/bcm2835_mbox.h" +#include "hw/misc/bcm2835_mphi.h" #include "hw/misc/bcm2835_thermal.h" #include "hw/sd/sdhci.h" #include "hw/sd/bcm2835_sdhost.h" @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { qemu_irq irq, fiq; BCM2835SystemTimerState systmr; + BCM2835MphiState mphi; UnimplementedDeviceState armtmr; UnimplementedDeviceState cprman; UnimplementedDeviceState a2w; diff --git a/include/hw/misc/bcm2835_mphi.h b/include/hw/misc/bcm2835_mphi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_mphi.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 SOC MPHI state definitions + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HW_MISC_BCM2835_MPHI_H +#define HW_MISC_BCM2835_MPHI_H + +#include "hw/irq.h" +#include "hw/sysbus.h" + +#define MPHI_MMIO_SIZE 0x1000 + +typedef struct BCM2835MphiState BCM2835MphiState; + +struct BCM2835MphiState { + SysBusDevice parent_obj; + qemu_irq irq; + MemoryRegion iomem; + + uint32_t outdda; + uint32_t outddb; + uint32_t ctrl; + uint32_t intstat; + uint32_t swirq; +}; + +#define TYPE_BCM2835_MPHI "bcm2835-mphi" + +#define BCM2835_MPHI(obj) \ + OBJECT_CHECK(BCM2835MphiState, (obj), TYPE_BCM2835_MPHI) + +#endif diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) OBJECT(&s->sdhci.sdbus)); object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost", OBJECT(&s->sdhost.sdbus)); + + /* Mphi */ + sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi), + TYPE_BCM2835_MPHI); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus"); + /* Mphi */ + object_property_set_bool(OBJECT(&s->mphi), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, MPHI_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mphi), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mphi), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_HOSTPORT)); + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); diff --git a/hw/misc/bcm2835_mphi.c b/hw/misc/bcm2835_mphi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/bcm2835_mphi.c @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 SOC MPHI emulation + * + * Very basic emulation, only providing the FIQ interrupt needed to + * allow the dwc-otg USB host controller driver in the Raspbian kernel + * to function. + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/misc/bcm2835_mphi.h" +#include "migration/vmstate.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" + +static inline void mphi_raise_irq(BCM2835MphiState *s) +{ + qemu_set_irq(s->irq, 1); +} + +static inline void mphi_lower_irq(BCM2835MphiState *s) +{ + qemu_set_irq(s->irq, 0); +} + +static uint64_t mphi_reg_read(void *ptr, hwaddr addr, unsigned size) +{ + BCM2835MphiState *s = ptr; + uint32_t val = 0; + + switch (addr) { + case 0x28: /* outdda */ + val = s->outdda; + break; + case 0x2c: /* outddb */ + val = s->outddb; + break; + case 0x4c: /* ctrl */ + val = s->ctrl; + val |= 1 << 17; + break; + case 0x50: /* intstat */ + val = s->intstat; + break; + case 0x1f0: /* swirq_set */ + val = s->swirq; + break; + case 0x1f4: /* swirq_clr */ + val = s->swirq; + break; + default: + qemu_log_mask(LOG_UNIMP, "read from unknown register"); + break; + } + + return val; +} + +static void mphi_reg_write(void *ptr, hwaddr addr, uint64_t val, unsigned size) +{ + BCM2835MphiState *s = ptr; + int do_irq = 0; + + switch (addr) { + case 0x28: /* outdda */ + s->outdda = val; + break; + case 0x2c: /* outddb */ + s->outddb = val; + if (val & (1 << 29)) { + do_irq = 1; + } + break; + case 0x4c: /* ctrl */ + s->ctrl = val; + if (val & (1 << 16)) { + do_irq = -1; + } + break; + case 0x50: /* intstat */ + s->intstat = val; + if (val & ((1 << 16) | (1 << 29))) { + do_irq = -1; + } + break; + case 0x1f0: /* swirq_set */ + s->swirq |= val; + do_irq = 1; + break; + case 0x1f4: /* swirq_clr */ + s->swirq &= ~val; + do_irq = -1; + break; + default: + qemu_log_mask(LOG_UNIMP, "write to unknown register"); + return; + } + + if (do_irq > 0) { + mphi_raise_irq(s); + } else if (do_irq < 0) { + mphi_lower_irq(s); + } +} + +static const MemoryRegionOps mphi_mmio_ops = { + .read = mphi_reg_read, + .write = mphi_reg_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mphi_reset(DeviceState *dev) +{ + BCM2835MphiState *s = BCM2835_MPHI(dev); + + s->outdda = 0; + s->outddb = 0; + s->ctrl = 0; + s->intstat = 0; + s->swirq = 0; +} + +static void mphi_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + BCM2835MphiState *s = BCM2835_MPHI(dev); + + sysbus_init_irq(sbd, &s->irq); +} + +static void mphi_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + BCM2835MphiState *s = BCM2835_MPHI(obj); + + memory_region_init_io(&s->iomem, obj, &mphi_mmio_ops, s, "mphi", MPHI_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +const VMStateDescription vmstate_mphi_state = { + .name = "mphi", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(outdda, BCM2835MphiState), + VMSTATE_UINT32(outddb, BCM2835MphiState), + VMSTATE_UINT32(ctrl, BCM2835MphiState), + VMSTATE_UINT32(intstat, BCM2835MphiState), + VMSTATE_UINT32(swirq, BCM2835MphiState), + VMSTATE_END_OF_LIST() + } +}; + +static void mphi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = mphi_realize; + dc->reset = mphi_reset; + dc->vmsd = &vmstate_mphi_state; +} + +static const TypeInfo bcm2835_mphi_type_info = { + .name = TYPE_BCM2835_MPHI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835MphiState), + .instance_init = mphi_init, + .class_init = mphi_class_init, +}; + +static void bcm2835_mphi_register_types(void) +{ + type_register_static(&bcm2835_mphi_type_info); +} + +type_init(bcm2835_mphi_register_types) diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_OMAP) += omap_l4.o common-obj-$(CONFIG_OMAP) += omap_sdrc.o common-obj-$(CONFIG_OMAP) += omap_tap.o common-obj-$(CONFIG_RASPI) += bcm2835_mbox.o +common-obj-$(CONFIG_RASPI) += bcm2835_mphi.o common-obj-$(CONFIG_RASPI) += bcm2835_property.o common-obj-$(CONFIG_RASPI) += bcm2835_rng.o common-obj-$(CONFIG_RASPI) += bcm2835_thermal.o -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Import the dwc-hsotg (dwc2) register definitions file from the Linux kernel. This is a copy of drivers/usb/dwc2/hw.h from the mainline Linux kernel, the only changes being to the header, and two instances of 'u32' changed to 'uint32_t' to allow it to compile. Checkpatch throws a boatload of errors due to the tab indentation, but I would rather import it as-is than reformat it. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-3-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/usb/dwc2-regs.h | 899 +++++++++++++++++++++++++++++++++++++ 1 file changed, 899 insertions(+) create mode 100644 include/hw/usb/dwc2-regs.h diff --git a/include/hw/usb/dwc2-regs.h b/include/hw/usb/dwc2-regs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/dwc2-regs.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Imported from the Linux kernel file drivers/usb/dwc2/hw.h, commit + * a89bae709b3492b478480a2c9734e7e9393b279c ("usb: dwc2: Move + * UTMI_PHY_DATA defines closer") + * + * hw.h - DesignWare HS OTG Controller hardware definitions + * + * Copyright 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_HW_H__ +#define __DWC2_HW_H__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_CHIRPEN BIT(27) +#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22) +#define GOTGCTL_MULT_VALID_BC_SHIFT 22 +#define GOTGCTL_OTGVER BIT(20) +#define GOTGCTL_BSESVLD BIT(19) +#define GOTGCTL_ASESVLD BIT(18) +#define GOTGCTL_DBNC_SHORT BIT(17) +#define GOTGCTL_CONID_B BIT(16) +#define GOTGCTL_DBNCE_FLTR_BYPASS BIT(15) +#define GOTGCTL_DEVHNPEN BIT(11) +#define GOTGCTL_HSTSETHNPEN BIT(10) +#define GOTGCTL_HNPREQ BIT(9) +#define GOTGCTL_HSTNEGSCS BIT(8) +#define GOTGCTL_SESREQ BIT(1) +#define GOTGCTL_SESREQSCS BIT(0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DBNCE_DONE BIT(19) +#define GOTGINT_A_DEV_TOUT_CHG BIT(18) +#define GOTGINT_HST_NEG_DET BIT(17) +#define GOTGINT_HST_NEG_SUC_STS_CHNG BIT(9) +#define GOTGINT_SES_REQ_SUC_STS_CHNG BIT(8) +#define GOTGINT_SES_END_DET BIT(2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_AHB_SINGLE BIT(23) +#define GAHBCFG_NOTI_ALL_DMA_WRIT BIT(22) +#define GAHBCFG_REM_MEM_SUPP BIT(21) +#define GAHBCFG_P_TXF_EMP_LVL BIT(8) +#define GAHBCFG_NP_TXF_EMP_LVL BIT(7) +#define GAHBCFG_DMA_EN BIT(5) +#define GAHBCFG_HBSTLEN_MASK (0xf << 1) +#define GAHBCFG_HBSTLEN_SHIFT 1 +#define GAHBCFG_HBSTLEN_SINGLE 0 +#define GAHBCFG_HBSTLEN_INCR 1 +#define GAHBCFG_HBSTLEN_INCR4 3 +#define GAHBCFG_HBSTLEN_INCR8 5 +#define GAHBCFG_HBSTLEN_INCR16 7 +#define GAHBCFG_GLBL_INTR_EN BIT(0) +#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \ + GAHBCFG_NP_TXF_EMP_LVL | \ + GAHBCFG_DMA_EN | \ + GAHBCFG_GLBL_INTR_EN) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_FORCEDEVMODE BIT(30) +#define GUSBCFG_FORCEHOSTMODE BIT(29) +#define GUSBCFG_TXENDDELAY BIT(28) +#define GUSBCFG_ICTRAFFICPULLREMOVE BIT(27) +#define GUSBCFG_ICUSBCAP BIT(26) +#define GUSBCFG_ULPI_INT_PROT_DIS BIT(25) +#define GUSBCFG_INDICATORPASSTHROUGH BIT(24) +#define GUSBCFG_INDICATORCOMPLEMENT BIT(23) +#define GUSBCFG_TERMSELDLPULSE BIT(22) +#define GUSBCFG_ULPI_INT_VBUS_IND BIT(21) +#define GUSBCFG_ULPI_EXT_VBUS_DRV BIT(20) +#define GUSBCFG_ULPI_CLK_SUSP_M BIT(19) +#define GUSBCFG_ULPI_AUTO_RES BIT(18) +#define GUSBCFG_ULPI_FS_LS BIT(17) +#define GUSBCFG_OTG_UTMI_FS_SEL BIT(16) +#define GUSBCFG_PHY_LP_CLK_SEL BIT(15) +#define GUSBCFG_USBTRDTIM_MASK (0xf << 10) +#define GUSBCFG_USBTRDTIM_SHIFT 10 +#define GUSBCFG_HNPCAP BIT(9) +#define GUSBCFG_SRPCAP BIT(8) +#define GUSBCFG_DDRSEL BIT(7) +#define GUSBCFG_PHYSEL BIT(6) +#define GUSBCFG_FSINTF BIT(5) +#define GUSBCFG_ULPI_UTMI_SEL BIT(4) +#define GUSBCFG_PHYIF16 BIT(3) +#define GUSBCFG_PHYIF8 (0 << 3) +#define GUSBCFG_TOUTCAL_MASK (0x7 << 0) +#define GUSBCFG_TOUTCAL_SHIFT 0 +#define GUSBCFG_TOUTCAL_LIMIT 0x7 +#define GUSBCFG_TOUTCAL(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) +#define GRSTCTL_AHBIDLE BIT(31) +#define GRSTCTL_DMAREQ BIT(30) +#define GRSTCTL_TXFNUM_MASK (0x1f << 6) +#define GRSTCTL_TXFNUM_SHIFT 6 +#define GRSTCTL_TXFNUM_LIMIT 0x1f +#define GRSTCTL_TXFNUM(_x) ((_x) << 6) +#define GRSTCTL_TXFFLSH BIT(5) +#define GRSTCTL_RXFFLSH BIT(4) +#define GRSTCTL_IN_TKNQ_FLSH BIT(3) +#define GRSTCTL_FRMCNTRRST BIT(2) +#define GRSTCTL_HSFTRST BIT(1) +#define GRSTCTL_CSFTRST BIT(0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) +#define GINTSTS_WKUPINT BIT(31) +#define GINTSTS_SESSREQINT BIT(30) +#define GINTSTS_DISCONNINT BIT(29) +#define GINTSTS_CONIDSTSCHNG BIT(28) +#define GINTSTS_LPMTRANRCVD BIT(27) +#define GINTSTS_PTXFEMP BIT(26) +#define GINTSTS_HCHINT BIT(25) +#define GINTSTS_PRTINT BIT(24) +#define GINTSTS_RESETDET BIT(23) +#define GINTSTS_FET_SUSP BIT(22) +#define GINTSTS_INCOMPL_IP BIT(21) +#define GINTSTS_INCOMPL_SOOUT BIT(21) +#define GINTSTS_INCOMPL_SOIN BIT(20) +#define GINTSTS_OEPINT BIT(19) +#define GINTSTS_IEPINT BIT(18) +#define GINTSTS_EPMIS BIT(17) +#define GINTSTS_RESTOREDONE BIT(16) +#define GINTSTS_EOPF BIT(15) +#define GINTSTS_ISOUTDROP BIT(14) +#define GINTSTS_ENUMDONE BIT(13) +#define GINTSTS_USBRST BIT(12) +#define GINTSTS_USBSUSP BIT(11) +#define GINTSTS_ERLYSUSP BIT(10) +#define GINTSTS_I2CINT BIT(9) +#define GINTSTS_ULPI_CK_INT BIT(8) +#define GINTSTS_GOUTNAKEFF BIT(7) +#define GINTSTS_GINNAKEFF BIT(6) +#define GINTSTS_NPTXFEMP BIT(5) +#define GINTSTS_RXFLVL BIT(4) +#define GINTSTS_SOF BIT(3) +#define GINTSTS_OTGINT BIT(2) +#define GINTSTS_MODEMIS BIT(1) +#define GINTSTS_CURMODE_HOST BIT(0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT 25 +#define GRXSTS_PKTSTS_MASK (0xf << 17) +#define GRXSTS_PKTSTS_SHIFT 17 +#define GRXSTS_PKTSTS_GLOBALOUTNAK 1 +#define GRXSTS_PKTSTS_OUTRX 2 +#define GRXSTS_PKTSTS_HCHIN 2 +#define GRXSTS_PKTSTS_OUTDONE 3 +#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3 +#define GRXSTS_PKTSTS_SETUPDONE 4 +#define GRXSTS_PKTSTS_DATATOGGLEERR 5 +#define GRXSTS_PKTSTS_SETUPRX 6 +#define GRXSTS_PKTSTS_HCHHALTED 7 +#define GRXSTS_HCHNUM_MASK (0xf << 0) +#define GRXSTS_HCHNUM_SHIFT 0 +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT 15 +#define GRXSTS_BYTECNT_MASK (0x7ff << 4) +#define GRXSTS_BYTECNT_SHIFT 4 +#define GRXSTS_EPNUM_MASK (0xf << 0) +#define GRXSTS_EPNUM_SHIFT 0 + +#define GRXFSIZ HSOTG_REG(0x024) +#define GRXFSIZ_DEPTH_MASK (0xffff << 0) +#define GRXFSIZ_DEPTH_SHIFT 0 + +#define GNPTXFSIZ HSOTG_REG(0x028) +/* Use FIFOSIZE_* constants to access this register */ + +#define GNPTXSTS HSOTG_REG(0x02C) +#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24) +#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16) +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0 +#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff) + +#define GI2CCTL HSOTG_REG(0x0030) +#define GI2CCTL_BSYDNE BIT(31) +#define GI2CCTL_RW BIT(30) +#define GI2CCTL_I2CDATSE0 BIT(28) +#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26) +#define GI2CCTL_I2CDEVADDR_SHIFT 26 +#define GI2CCTL_I2CSUSPCTL BIT(25) +#define GI2CCTL_ACK BIT(24) +#define GI2CCTL_I2CEN BIT(23) +#define GI2CCTL_ADDR_MASK (0x7f << 16) +#define GI2CCTL_ADDR_SHIFT 16 +#define GI2CCTL_REGADDR_MASK (0xff << 8) +#define GI2CCTL_REGADDR_SHIFT 8 +#define GI2CCTL_RWDATA_MASK (0xff << 0) +#define GI2CCTL_RWDATA_SHIFT 0 + +#define GPVNDCTL HSOTG_REG(0x0034) +#define GGPIO HSOTG_REG(0x0038) +#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16) + +#define GUID HSOTG_REG(0x003c) +#define GSNPSID HSOTG_REG(0x0040) +#define GHWCFG1 HSOTG_REG(0x0044) +#define GSNPSID_ID_MASK GENMASK(31, 16) + +#define GHWCFG2 HSOTG_REG(0x0048) +#define GHWCFG2_OTG_ENABLE_IC_USB BIT(31) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26 +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24) +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24 +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22) +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22 +#define GHWCFG2_MULTI_PROC_INT BIT(20) +#define GHWCFG2_DYNAMIC_FIFO BIT(19) +#define GHWCFG2_PERIO_EP_SUPPORTED BIT(18) +#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14) +#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14 +#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10) +#define GHWCFG2_NUM_DEV_EP_SHIFT 10 +#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHIFT 8 +#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_FS_PHY_TYPE_DEDICATED 1 +#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI 2 +#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI 3 +#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6) +#define GHWCFG2_HS_PHY_TYPE_SHIFT 6 +#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_HS_PHY_TYPE_UTMI 1 +#define GHWCFG2_HS_PHY_TYPE_ULPI 2 +#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 +#define GHWCFG2_POINT2POINT BIT(5) +#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3) +#define GHWCFG2_ARCHITECTURE_SHIFT 3 +#define GHWCFG2_SLAVE_ONLY_ARCH 0 +#define GHWCFG2_EXT_DMA_ARCH 1 +#define GHWCFG2_INT_DMA_ARCH 2 +#define GHWCFG2_OP_MODE_MASK (0x7 << 0) +#define GHWCFG2_OP_MODE_SHIFT 0 +#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE 0 +#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE 1 +#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE 2 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 +#define GHWCFG2_OP_MODE_UNDEFINED 7 + +#define GHWCFG3 HSOTG_REG(0x004c) +#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16) +#define GHWCFG3_DFIFO_DEPTH_SHIFT 16 +#define GHWCFG3_OTG_LPM_EN BIT(15) +#define GHWCFG3_BC_SUPPORT BIT(14) +#define GHWCFG3_OTG_ENABLE_HSIC BIT(13) +#define GHWCFG3_ADP_SUPP BIT(12) +#define GHWCFG3_SYNCH_RESET_TYPE BIT(11) +#define GHWCFG3_OPTIONAL_FEATURES BIT(10) +#define GHWCFG3_VENDOR_CTRL_IF BIT(9) +#define GHWCFG3_I2C BIT(8) +#define GHWCFG3_OTG_FUNC BIT(7) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4 +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0) +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0 + +#define GHWCFG4 HSOTG_REG(0x0050) +#define GHWCFG4_DESC_DMA_DYN BIT(31) +#define GHWCFG4_DESC_DMA BIT(30) +#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26) +#define GHWCFG4_NUM_IN_EPS_SHIFT 26 +#define GHWCFG4_DED_FIFO_EN BIT(25) +#define GHWCFG4_DED_FIFO_SHIFT 25 +#define GHWCFG4_SESSION_END_FILT_EN BIT(24) +#define GHWCFG4_B_VALID_FILT_EN BIT(23) +#define GHWCFG4_A_VALID_FILT_EN BIT(22) +#define GHWCFG4_VBUS_VALID_FILT_EN BIT(21) +#define GHWCFG4_IDDIG_FILT_EN BIT(20) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2 +#define GHWCFG4_ACG_SUPPORTED BIT(12) +#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11) +#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED BIT(10) +#define GHWCFG4_XHIBER BIT(7) +#define GHWCFG4_HIBER BIT(6) +#define GHWCFG4_MIN_AHB_FREQ BIT(5) +#define GHWCFG4_POWER_OPTIMIZ BIT(4) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0 + +#define GLPMCFG HSOTG_REG(0x0054) +#define GLPMCFG_INVSELHSIC BIT(31) +#define GLPMCFG_HSICCON BIT(30) +#define GLPMCFG_RSTRSLPSTS BIT(29) +#define GLPMCFG_ENBESL BIT(28) +#define GLPMCFG_LPM_RETRYCNT_STS_MASK (0x7 << 25) +#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT 25 +#define GLPMCFG_SNDLPM BIT(24) +#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21) +#define GLPMCFG_RETRY_CNT_SHIFT 21 +#define GLPMCFG_LPM_REJECT_CTRL_CONTROL BIT(21) +#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) +#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17) +#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17 +#define GLPMCFG_L1RESUMEOK BIT(16) +#define GLPMCFG_SLPSTS BIT(15) +#define GLPMCFG_COREL1RES_MASK (0x3 << 13) +#define GLPMCFG_COREL1RES_SHIFT 13 +#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8) +#define GLPMCFG_HIRD_THRES_SHIFT 8 +#define GLPMCFG_HIRD_THRES_EN (0x10 << 8) +#define GLPMCFG_ENBLSLPM BIT(7) +#define GLPMCFG_BREMOTEWAKE BIT(6) +#define GLPMCFG_HIRD_MASK (0xf << 2) +#define GLPMCFG_HIRD_SHIFT 2 +#define GLPMCFG_APPL1RES BIT(1) +#define GLPMCFG_LPMCAP BIT(0) + +#define GPWRDN HSOTG_REG(0x0058) +#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24) +#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24 +#define GPWRDN_ADP_INT BIT(23) +#define GPWRDN_BSESSVLD BIT(22) +#define GPWRDN_IDSTS BIT(21) +#define GPWRDN_LINESTATE_MASK (0x3 << 19) +#define GPWRDN_LINESTATE_SHIFT 19 +#define GPWRDN_STS_CHGINT_MSK BIT(18) +#define GPWRDN_STS_CHGINT BIT(17) +#define GPWRDN_SRP_DET_MSK BIT(16) +#define GPWRDN_SRP_DET BIT(15) +#define GPWRDN_CONNECT_DET_MSK BIT(14) +#define GPWRDN_CONNECT_DET BIT(13) +#define GPWRDN_DISCONN_DET_MSK BIT(12) +#define GPWRDN_DISCONN_DET BIT(11) +#define GPWRDN_RST_DET_MSK BIT(10) +#define GPWRDN_RST_DET BIT(9) +#define GPWRDN_LNSTSCHG_MSK BIT(8) +#define GPWRDN_LNSTSCHG BIT(7) +#define GPWRDN_DIS_VBUS BIT(6) +#define GPWRDN_PWRDNSWTCH BIT(5) +#define GPWRDN_PWRDNRSTN BIT(4) +#define GPWRDN_PWRDNCLMP BIT(3) +#define GPWRDN_RESTORE BIT(2) +#define GPWRDN_PMUACTV BIT(1) +#define GPWRDN_PMUINTSEL BIT(0) + +#define GDFIFOCFG HSOTG_REG(0x005c) +#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16) +#define GDFIFOCFG_EPINFOBASE_SHIFT 16 +#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0) +#define GDFIFOCFG_GDFIFOCFG_SHIFT 0 + +#define ADPCTL HSOTG_REG(0x0060) +#define ADPCTL_AR_MASK (0x3 << 27) +#define ADPCTL_AR_SHIFT 27 +#define ADPCTL_ADP_TMOUT_INT_MSK BIT(26) +#define ADPCTL_ADP_SNS_INT_MSK BIT(25) +#define ADPCTL_ADP_PRB_INT_MSK BIT(24) +#define ADPCTL_ADP_TMOUT_INT BIT(23) +#define ADPCTL_ADP_SNS_INT BIT(22) +#define ADPCTL_ADP_PRB_INT BIT(21) +#define ADPCTL_ADPENA BIT(20) +#define ADPCTL_ADPRES BIT(19) +#define ADPCTL_ENASNS BIT(18) +#define ADPCTL_ENAPRB BIT(17) +#define ADPCTL_RTIM_MASK (0x7ff << 6) +#define ADPCTL_RTIM_SHIFT 6 +#define ADPCTL_PRB_PER_MASK (0x3 << 4) +#define ADPCTL_PRB_PER_SHIFT 4 +#define ADPCTL_PRB_DELTA_MASK (0x3 << 2) +#define ADPCTL_PRB_DELTA_SHIFT 2 +#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0) +#define ADPCTL_PRB_DSCHRG_SHIFT 0 + +#define GREFCLK HSOTG_REG(0x0064) +#define GREFCLK_REFCLKPER_MASK (0x1ffff << 15) +#define GREFCLK_REFCLKPER_SHIFT 15 +#define GREFCLK_REF_CLK_MODE BIT(14) +#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK (0x3ff) +#define GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT 0 + +#define GINTMSK2 HSOTG_REG(0x0068) +#define GINTMSK2_WKUP_ALERT_INT_MSK BIT(0) + +#define GINTSTS2 HSOTG_REG(0x006c) +#define GINTSTS2_WKUP_ALERT_INT BIT(0) + +#define HPTXFSIZ HSOTG_REG(0x100) +/* Use FIFOSIZE_* constants to access this register */ + +#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) +/* Use FIFOSIZE_* constants to access this register */ + +/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */ +#define FIFOSIZE_DEPTH_MASK (0xffff << 16) +#define FIFOSIZE_DEPTH_SHIFT 16 +#define FIFOSIZE_STARTADDR_MASK (0xffff << 0) +#define FIFOSIZE_STARTADDR_SHIFT 0 +#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff) + +/* Device mode registers */ + +#define DCFG HSOTG_REG(0x800) +#define DCFG_DESCDMA_EN BIT(23) +#define DCFG_EPMISCNT_MASK (0x1f << 18) +#define DCFG_EPMISCNT_SHIFT 18 +#define DCFG_EPMISCNT_LIMIT 0x1f +#define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_IPG_ISOC_SUPPORDED BIT(17) +#define DCFG_PERFRINT_MASK (0x3 << 11) +#define DCFG_PERFRINT_SHIFT 11 +#define DCFG_PERFRINT_LIMIT 0x3 +#define DCFG_PERFRINT(_x) ((_x) << 11) +#define DCFG_DEVADDR_MASK (0x7f << 4) +#define DCFG_DEVADDR_SHIFT 4 +#define DCFG_DEVADDR_LIMIT 0x7f +#define DCFG_DEVADDR(_x) ((_x) << 4) +#define DCFG_NZ_STS_OUT_HSHK BIT(2) +#define DCFG_DEVSPD_MASK (0x3 << 0) +#define DCFG_DEVSPD_SHIFT 0 +#define DCFG_DEVSPD_HS 0 +#define DCFG_DEVSPD_FS 1 +#define DCFG_DEVSPD_LS 2 +#define DCFG_DEVSPD_FS48 3 + +#define DCTL HSOTG_REG(0x804) +#define DCTL_SERVICE_INTERVAL_SUPPORTED BIT(19) +#define DCTL_PWRONPRGDONE BIT(11) +#define DCTL_CGOUTNAK BIT(10) +#define DCTL_SGOUTNAK BIT(9) +#define DCTL_CGNPINNAK BIT(8) +#define DCTL_SGNPINNAK BIT(7) +#define DCTL_TSTCTL_MASK (0x7 << 4) +#define DCTL_TSTCTL_SHIFT 4 +#define DCTL_GOUTNAKSTS BIT(3) +#define DCTL_GNPINNAKSTS BIT(2) +#define DCTL_SFTDISCON BIT(1) +#define DCTL_RMTWKUPSIG BIT(0) + +#define DSTS HSOTG_REG(0x808) +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT 8 +#define DSTS_SOFFN_LIMIT 0x3fff +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ERRATICERR BIT(3) +#define DSTS_ENUMSPD_MASK (0x3 << 1) +#define DSTS_ENUMSPD_SHIFT 1 +#define DSTS_ENUMSPD_HS 0 +#define DSTS_ENUMSPD_FS 1 +#define DSTS_ENUMSPD_LS 2 +#define DSTS_ENUMSPD_FS48 3 +#define DSTS_SUSPSTS BIT(0) + +#define DIEPMSK HSOTG_REG(0x810) +#define DIEPMSK_NAKMSK BIT(13) +#define DIEPMSK_BNAININTRMSK BIT(9) +#define DIEPMSK_TXFIFOUNDRNMSK BIT(8) +#define DIEPMSK_TXFIFOEMPTY BIT(7) +#define DIEPMSK_INEPNAKEFFMSK BIT(6) +#define DIEPMSK_INTKNEPMISMSK BIT(5) +#define DIEPMSK_INTKNTXFEMPMSK BIT(4) +#define DIEPMSK_TIMEOUTMSK BIT(3) +#define DIEPMSK_AHBERRMSK BIT(2) +#define DIEPMSK_EPDISBLDMSK BIT(1) +#define DIEPMSK_XFERCOMPLMSK BIT(0) + +#define DOEPMSK HSOTG_REG(0x814) +#define DOEPMSK_BNAMSK BIT(9) +#define DOEPMSK_BACK2BACKSETUP BIT(6) +#define DOEPMSK_STSPHSERCVDMSK BIT(5) +#define DOEPMSK_OUTTKNEPDISMSK BIT(4) +#define DOEPMSK_SETUPMSK BIT(3) +#define DOEPMSK_AHBERRMSK BIT(2) +#define DOEPMSK_EPDISBLDMSK BIT(1) +#define DOEPMSK_XFERCOMPLMSK BIT(0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) +#define DAINT_OUTEP_SHIFT 16 +#define DAINT_OUTEP(_x) (1 << ((_x) + 16)) +#define DAINT_INEP(_x) (1 << (_x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) +#define DIEPEMPMSK HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) + +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting different for EP0 + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT 0 +#define D0EPCTL_MPS_64 0 +#define D0EPCTL_MPS_32 1 +#define D0EPCTL_MPS_16 2 +#define D0EPCTL_MPS_8 3 + +#define DXEPCTL_EPENA BIT(31) +#define DXEPCTL_EPDIS BIT(30) +#define DXEPCTL_SETD1PID BIT(29) +#define DXEPCTL_SETODDFR BIT(29) +#define DXEPCTL_SETD0PID BIT(28) +#define DXEPCTL_SETEVENFR BIT(28) +#define DXEPCTL_SNAK BIT(27) +#define DXEPCTL_CNAK BIT(26) +#define DXEPCTL_TXFNUM_MASK (0xf << 22) +#define DXEPCTL_TXFNUM_SHIFT 22 +#define DXEPCTL_TXFNUM_LIMIT 0xf +#define DXEPCTL_TXFNUM(_x) ((_x) << 22) +#define DXEPCTL_STALL BIT(21) +#define DXEPCTL_SNP BIT(20) +#define DXEPCTL_EPTYPE_MASK (0x3 << 18) +#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18) +#define DXEPCTL_EPTYPE_ISO (0x1 << 18) +#define DXEPCTL_EPTYPE_BULK (0x2 << 18) +#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18) + +#define DXEPCTL_NAKSTS BIT(17) +#define DXEPCTL_DPID BIT(16) +#define DXEPCTL_EOFRNUM BIT(16) +#define DXEPCTL_USBACTEP BIT(15) +#define DXEPCTL_NEXTEP_MASK (0xf << 11) +#define DXEPCTL_NEXTEP_SHIFT 11 +#define DXEPCTL_NEXTEP_LIMIT 0xf +#define DXEPCTL_NEXTEP(_x) ((_x) << 11) +#define DXEPCTL_MPS_MASK (0x7ff << 0) +#define DXEPCTL_MPS_SHIFT 0 +#define DXEPCTL_MPS_LIMIT 0x7ff +#define DXEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) +#define DXEPINT_SETUP_RCVD BIT(15) +#define DXEPINT_NYETINTRPT BIT(14) +#define DXEPINT_NAKINTRPT BIT(13) +#define DXEPINT_BBLEERRINTRPT BIT(12) +#define DXEPINT_PKTDRPSTS BIT(11) +#define DXEPINT_BNAINTR BIT(9) +#define DXEPINT_TXFIFOUNDRN BIT(8) +#define DXEPINT_OUTPKTERR BIT(8) +#define DXEPINT_TXFEMP BIT(7) +#define DXEPINT_INEPNAKEFF BIT(6) +#define DXEPINT_BACK2BACKSETUP BIT(6) +#define DXEPINT_INTKNEPMIS BIT(5) +#define DXEPINT_STSPHSERCVD BIT(5) +#define DXEPINT_INTKNTXFEMP BIT(4) +#define DXEPINT_OUTTKNEPDIS BIT(4) +#define DXEPINT_TIMEOUT BIT(3) +#define DXEPINT_SETUP BIT(3) +#define DXEPINT_AHBERR BIT(2) +#define DXEPINT_EPDISBLD BIT(1) +#define DXEPINT_XFERCOMPL BIT(0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) +#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19) +#define DIEPTSIZ0_PKTCNT_SHIFT 19 +#define DIEPTSIZ0_PKTCNT_LIMIT 0x3 +#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19) +#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DIEPTSIZ0_XFERSIZE_SHIFT 0 +#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f +#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCNT_SHIFT 29 +#define DOEPTSIZ0_SUPCNT_LIMIT 0x3 +#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29) +#define DOEPTSIZ0_PKTCNT BIT(19) +#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DOEPTSIZ0_XFERSIZE_SHIFT 0 + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) +#define DXEPTSIZ_MC_MASK (0x3 << 29) +#define DXEPTSIZ_MC_SHIFT 29 +#define DXEPTSIZ_MC_LIMIT 0x3 +#define DXEPTSIZ_MC(_x) ((_x) << 29) +#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19) +#define DXEPTSIZ_PKTCNT_SHIFT 19 +#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff +#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff) +#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19) +#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define DXEPTSIZ_XFERSIZE_SHIFT 0 +#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff +#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) + +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define PCGCTL HSOTG_REG(0x0e00) +#define PCGCTL_IF_DEV_MODE BIT(31) +#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29) +#define PCGCTL_P2HD_PRT_SPD_SHIFT 29 +#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27) +#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 +#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20) +#define PCGCTL_MAC_DEV_ADDR_SHIFT 20 +#define PCGCTL_MAX_TERMSEL BIT(19) +#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17) +#define PCGCTL_MAX_XCVRSELECT_SHIFT 17 +#define PCGCTL_PORT_POWER BIT(16) +#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14) +#define PCGCTL_PRT_CLK_SEL_SHIFT 14 +#define PCGCTL_ESS_REG_RESTORED BIT(13) +#define PCGCTL_EXTND_HIBER_SWITCH BIT(12) +#define PCGCTL_EXTND_HIBER_PWRCLMP BIT(11) +#define PCGCTL_ENBL_EXTND_HIBER BIT(10) +#define PCGCTL_RESTOREMODE BIT(9) +#define PCGCTL_RESETAFTSUSP BIT(8) +#define PCGCTL_DEEP_SLEEP BIT(7) +#define PCGCTL_PHY_IN_SLEEP BIT(6) +#define PCGCTL_ENBL_SLEEP_GATING BIT(5) +#define PCGCTL_RSTPDWNMODULE BIT(3) +#define PCGCTL_PWRCLMP BIT(2) +#define PCGCTL_GATEHCLK BIT(1) +#define PCGCTL_STOPPCLK BIT(0) + +#define PCGCCTL1 HSOTG_REG(0xe04) +#define PCGCCTL1_TIMER (0x3 << 1) +#define PCGCCTL1_GATEEN BIT(0) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +/* Host Mode Registers */ + +#define HCFG HSOTG_REG(0x0400) +#define HCFG_MODECHTIMEN BIT(31) +#define HCFG_PERSCHEDENA BIT(26) +#define HCFG_FRLISTEN_MASK (0x3 << 24) +#define HCFG_FRLISTEN_SHIFT 24 +#define HCFG_FRLISTEN_8 (0 << 24) +#define FRLISTEN_8_SIZE 8 +#define HCFG_FRLISTEN_16 BIT(24) +#define FRLISTEN_16_SIZE 16 +#define HCFG_FRLISTEN_32 (2 << 24) +#define FRLISTEN_32_SIZE 32 +#define HCFG_FRLISTEN_64 (3 << 24) +#define FRLISTEN_64_SIZE 64 +#define HCFG_DESCDMA BIT(23) +#define HCFG_RESVALID_MASK (0xff << 8) +#define HCFG_RESVALID_SHIFT 8 +#define HCFG_ENA32KHZ BIT(7) +#define HCFG_FSLSSUPP BIT(2) +#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0) +#define HCFG_FSLSPCLKSEL_SHIFT 0 +#define HCFG_FSLSPCLKSEL_30_60_MHZ 0 +#define HCFG_FSLSPCLKSEL_48_MHZ 1 +#define HCFG_FSLSPCLKSEL_6_MHZ 2 + +#define HFIR HSOTG_REG(0x0404) +#define HFIR_FRINT_MASK (0xffff << 0) +#define HFIR_FRINT_SHIFT 0 +#define HFIR_RLDCTRL BIT(16) + +#define HFNUM HSOTG_REG(0x0408) +#define HFNUM_FRREM_MASK (0xffff << 16) +#define HFNUM_FRREM_SHIFT 16 +#define HFNUM_FRNUM_MASK (0xffff << 0) +#define HFNUM_FRNUM_SHIFT 0 +#define HFNUM_MAX_FRNUM 0x3fff + +#define HPTXSTS HSOTG_REG(0x0410) +#define TXSTS_QTOP_ODD BIT(31) +#define TXSTS_QTOP_CHNEP_MASK (0xf << 27) +#define TXSTS_QTOP_CHNEP_SHIFT 27 +#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25) +#define TXSTS_QTOP_TOKEN_SHIFT 25 +#define TXSTS_QTOP_TERMINATE BIT(24) +#define TXSTS_QSPCAVAIL_MASK (0xff << 16) +#define TXSTS_QSPCAVAIL_SHIFT 16 +#define TXSTS_FSPCAVAIL_MASK (0xffff << 0) +#define TXSTS_FSPCAVAIL_SHIFT 0 + +#define HAINT HSOTG_REG(0x0414) +#define HAINTMSK HSOTG_REG(0x0418) +#define HFLBADDR HSOTG_REG(0x041c) + +#define HPRT0 HSOTG_REG(0x0440) +#define HPRT0_SPD_MASK (0x3 << 17) +#define HPRT0_SPD_SHIFT 17 +#define HPRT0_SPD_HIGH_SPEED 0 +#define HPRT0_SPD_FULL_SPEED 1 +#define HPRT0_SPD_LOW_SPEED 2 +#define HPRT0_TSTCTL_MASK (0xf << 13) +#define HPRT0_TSTCTL_SHIFT 13 +#define HPRT0_PWR BIT(12) +#define HPRT0_LNSTS_MASK (0x3 << 10) +#define HPRT0_LNSTS_SHIFT 10 +#define HPRT0_RST BIT(8) +#define HPRT0_SUSP BIT(7) +#define HPRT0_RES BIT(6) +#define HPRT0_OVRCURRCHG BIT(5) +#define HPRT0_OVRCURRACT BIT(4) +#define HPRT0_ENACHG BIT(3) +#define HPRT0_ENA BIT(2) +#define HPRT0_CONNDET BIT(1) +#define HPRT0_CONNSTS BIT(0) + +#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch)) +#define HCCHAR_CHENA BIT(31) +#define HCCHAR_CHDIS BIT(30) +#define HCCHAR_ODDFRM BIT(29) +#define HCCHAR_DEVADDR_MASK (0x7f << 22) +#define HCCHAR_DEVADDR_SHIFT 22 +#define HCCHAR_MULTICNT_MASK (0x3 << 20) +#define HCCHAR_MULTICNT_SHIFT 20 +#define HCCHAR_EPTYPE_MASK (0x3 << 18) +#define HCCHAR_EPTYPE_SHIFT 18 +#define HCCHAR_LSPDDEV BIT(17) +#define HCCHAR_EPDIR BIT(15) +#define HCCHAR_EPNUM_MASK (0xf << 11) +#define HCCHAR_EPNUM_SHIFT 11 +#define HCCHAR_MPS_MASK (0x7ff << 0) +#define HCCHAR_MPS_SHIFT 0 + +#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch)) +#define HCSPLT_SPLTENA BIT(31) +#define HCSPLT_COMPSPLT BIT(16) +#define HCSPLT_XACTPOS_MASK (0x3 << 14) +#define HCSPLT_XACTPOS_SHIFT 14 +#define HCSPLT_XACTPOS_MID 0 +#define HCSPLT_XACTPOS_END 1 +#define HCSPLT_XACTPOS_BEGIN 2 +#define HCSPLT_XACTPOS_ALL 3 +#define HCSPLT_HUBADDR_MASK (0x7f << 7) +#define HCSPLT_HUBADDR_SHIFT 7 +#define HCSPLT_PRTADDR_MASK (0x7f << 0) +#define HCSPLT_PRTADDR_SHIFT 0 + +#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch)) +#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch)) +#define HCINTMSK_RESERVED14_31 (0x3ffff << 14) +#define HCINTMSK_FRM_LIST_ROLL BIT(13) +#define HCINTMSK_XCS_XACT BIT(12) +#define HCINTMSK_BNA BIT(11) +#define HCINTMSK_DATATGLERR BIT(10) +#define HCINTMSK_FRMOVRUN BIT(9) +#define HCINTMSK_BBLERR BIT(8) +#define HCINTMSK_XACTERR BIT(7) +#define HCINTMSK_NYET BIT(6) +#define HCINTMSK_ACK BIT(5) +#define HCINTMSK_NAK BIT(4) +#define HCINTMSK_STALL BIT(3) +#define HCINTMSK_AHBERR BIT(2) +#define HCINTMSK_CHHLTD BIT(1) +#define HCINTMSK_XFERCOMPL BIT(0) + +#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch)) +#define TSIZ_DOPNG BIT(31) +#define TSIZ_SC_MC_PID_MASK (0x3 << 29) +#define TSIZ_SC_MC_PID_SHIFT 29 +#define TSIZ_SC_MC_PID_DATA0 0 +#define TSIZ_SC_MC_PID_DATA2 1 +#define TSIZ_SC_MC_PID_DATA1 2 +#define TSIZ_SC_MC_PID_MDATA 3 +#define TSIZ_SC_MC_PID_SETUP 3 +#define TSIZ_PKTCNT_MASK (0x3ff << 19) +#define TSIZ_PKTCNT_SHIFT 19 +#define TSIZ_NTD_MASK (0xff << 8) +#define TSIZ_NTD_SHIFT 8 +#define TSIZ_SCHINFO_MASK (0xff << 0) +#define TSIZ_SCHINFO_SHIFT 0 +#define TSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define TSIZ_XFERSIZE_SHIFT 0 + +#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch)) + +#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch)) + +#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch)) + +/** + * struct dwc2_dma_desc - DMA descriptor structure, + * used for both host and gadget modes + * + * @status: DMA descriptor status quadlet + * @buf: DMA descriptor data buffer pointer + * + * DMA Descriptor structure contains two quadlets: + * Status quadlet and Data buffer pointer. + */ +struct dwc2_dma_desc { + uint32_t status; + uint32_t buf; +} __packed; + +/* Host Mode DMA descriptor status quadlet */ + +#define HOST_DMA_A BIT(31) +#define HOST_DMA_STS_MASK (0x3 << 28) +#define HOST_DMA_STS_SHIFT 28 +#define HOST_DMA_STS_PKTERR BIT(28) +#define HOST_DMA_EOL BIT(26) +#define HOST_DMA_IOC BIT(25) +#define HOST_DMA_SUP BIT(24) +#define HOST_DMA_ALT_QTD BIT(23) +#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17) +#define HOST_DMA_QTD_OFFSET_SHIFT 17 +#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0) +#define HOST_DMA_ISOC_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_MASK (0x1ffff << 0) +#define HOST_DMA_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_LIMIT 131071 + +/* Device Mode DMA descriptor status quadlet */ + +#define DEV_DMA_BUFF_STS_MASK (0x3 << 30) +#define DEV_DMA_BUFF_STS_SHIFT 30 +#define DEV_DMA_BUFF_STS_HREADY 0 +#define DEV_DMA_BUFF_STS_DMABUSY 1 +#define DEV_DMA_BUFF_STS_DMADONE 2 +#define DEV_DMA_BUFF_STS_HBUSY 3 +#define DEV_DMA_STS_MASK (0x3 << 28) +#define DEV_DMA_STS_SHIFT 28 +#define DEV_DMA_STS_SUCC 0 +#define DEV_DMA_STS_BUFF_FLUSH 1 +#define DEV_DMA_STS_BUFF_ERR 3 +#define DEV_DMA_L BIT(27) +#define DEV_DMA_SHORT BIT(26) +#define DEV_DMA_IOC BIT(25) +#define DEV_DMA_SR BIT(24) +#define DEV_DMA_MTRF BIT(23) +#define DEV_DMA_ISOC_PID_MASK (0x3 << 23) +#define DEV_DMA_ISOC_PID_SHIFT 23 +#define DEV_DMA_ISOC_PID_DATA0 0 +#define DEV_DMA_ISOC_PID_DATA2 1 +#define DEV_DMA_ISOC_PID_DATA1 2 +#define DEV_DMA_ISOC_PID_MDATA 3 +#define DEV_DMA_ISOC_FRNUM_MASK (0x7ff << 12) +#define DEV_DMA_ISOC_FRNUM_SHIFT 12 +#define DEV_DMA_ISOC_TX_NBYTES_MASK (0xfff << 0) +#define DEV_DMA_ISOC_TX_NBYTES_LIMIT 0xfff +#define DEV_DMA_ISOC_RX_NBYTES_MASK (0x7ff << 0) +#define DEV_DMA_ISOC_RX_NBYTES_LIMIT 0x7ff +#define DEV_DMA_ISOC_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_MASK (0xffff << 0) +#define DEV_DMA_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_LIMIT 0xffff + +#define MAX_DMA_DESC_NUM_GENERIC 64 +#define MAX_DMA_DESC_NUM_HS_ISOC 256 + +#endif /* __DWC2_HW_H__ */ -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add the dwc-hsotg (dwc2) USB host controller state definitions. Mostly based on hw/usb/hcd-ehci.h. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-4-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-dwc2.h | 190 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 hw/usb/hcd-dwc2.h diff --git a/hw/usb/hcd-dwc2.h b/hw/usb/hcd-dwc2.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc2.h @@ -XXX,XX +XXX,XX @@ +/* + * dwc-hsotg (dwc2) USB host controller state definitions + * + * Based on hw/usb/hcd-ehci.h + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HW_USB_DWC2_H +#define HW_USB_DWC2_H + +#include "qemu/timer.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "hw/usb.h" +#include "sysemu/dma.h" + +#define DWC2_MMIO_SIZE 0x11000 + +#define DWC2_NB_CHAN 8 /* Number of host channels */ +#define DWC2_MAX_XFER_SIZE 65536 /* Max transfer size expected in HCTSIZ */ + +typedef struct DWC2Packet DWC2Packet; +typedef struct DWC2State DWC2State; +typedef struct DWC2Class DWC2Class; + +enum async_state { + DWC2_ASYNC_NONE = 0, + DWC2_ASYNC_INITIALIZED, + DWC2_ASYNC_INFLIGHT, + DWC2_ASYNC_FINISHED, +}; + +struct DWC2Packet { + USBPacket packet; + uint32_t devadr; + uint32_t epnum; + uint32_t epdir; + uint32_t mps; + uint32_t pid; + uint32_t index; + uint32_t pcnt; + uint32_t len; + int32_t async; + bool small; + bool needs_service; +}; + +struct DWC2State { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + USBBus bus; + qemu_irq irq; + MemoryRegion *dma_mr; + AddressSpace dma_as; + MemoryRegion container; + MemoryRegion hsotg; + MemoryRegion fifos; + + union { +#define DWC2_GLBREG_SIZE 0x70 + uint32_t glbreg[DWC2_GLBREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t gotgctl; /* 00 */ + uint32_t gotgint; /* 04 */ + uint32_t gahbcfg; /* 08 */ + uint32_t gusbcfg; /* 0c */ + uint32_t grstctl; /* 10 */ + uint32_t gintsts; /* 14 */ + uint32_t gintmsk; /* 18 */ + uint32_t grxstsr; /* 1c */ + uint32_t grxstsp; /* 20 */ + uint32_t grxfsiz; /* 24 */ + uint32_t gnptxfsiz; /* 28 */ + uint32_t gnptxsts; /* 2c */ + uint32_t gi2cctl; /* 30 */ + uint32_t gpvndctl; /* 34 */ + uint32_t ggpio; /* 38 */ + uint32_t guid; /* 3c */ + uint32_t gsnpsid; /* 40 */ + uint32_t ghwcfg1; /* 44 */ + uint32_t ghwcfg2; /* 48 */ + uint32_t ghwcfg3; /* 4c */ + uint32_t ghwcfg4; /* 50 */ + uint32_t glpmcfg; /* 54 */ + uint32_t gpwrdn; /* 58 */ + uint32_t gdfifocfg; /* 5c */ + uint32_t gadpctl; /* 60 */ + uint32_t grefclk; /* 64 */ + uint32_t gintmsk2; /* 68 */ + uint32_t gintsts2; /* 6c */ + }; + }; + + union { +#define DWC2_FSZREG_SIZE 0x04 + uint32_t fszreg[DWC2_FSZREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t hptxfsiz; /* 100 */ + }; + }; + + union { +#define DWC2_HREG0_SIZE 0x44 + uint32_t hreg0[DWC2_HREG0_SIZE / sizeof(uint32_t)]; + struct { + uint32_t hcfg; /* 400 */ + uint32_t hfir; /* 404 */ + uint32_t hfnum; /* 408 */ + uint32_t rsvd0; /* 40c */ + uint32_t hptxsts; /* 410 */ + uint32_t haint; /* 414 */ + uint32_t haintmsk; /* 418 */ + uint32_t hflbaddr; /* 41c */ + uint32_t rsvd1[8]; /* 420-43c */ + uint32_t hprt0; /* 440 */ + }; + }; + +#define DWC2_HREG1_SIZE (0x20 * DWC2_NB_CHAN) + uint32_t hreg1[DWC2_HREG1_SIZE / sizeof(uint32_t)]; + +#define hcchar(_ch) hreg1[((_ch) << 3) + 0] /* 500, 520, ... */ +#define hcsplt(_ch) hreg1[((_ch) << 3) + 1] /* 504, 524, ... */ +#define hcint(_ch) hreg1[((_ch) << 3) + 2] /* 508, 528, ... */ +#define hcintmsk(_ch) hreg1[((_ch) << 3) + 3] /* 50c, 52c, ... */ +#define hctsiz(_ch) hreg1[((_ch) << 3) + 4] /* 510, 530, ... */ +#define hcdma(_ch) hreg1[((_ch) << 3) + 5] /* 514, 534, ... */ +#define hcdmab(_ch) hreg1[((_ch) << 3) + 7] /* 51c, 53c, ... */ + + union { +#define DWC2_PCGREG_SIZE 0x08 + uint32_t pcgreg[DWC2_PCGREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t pcgctl; /* e00 */ + uint32_t pcgcctl1; /* e04 */ + }; + }; + + /* TODO - implement FIFO registers for slave mode */ +#define DWC2_HFIFO_SIZE (0x1000 * DWC2_NB_CHAN) + + /* + * Internal state + */ + QEMUTimer *eof_timer; + QEMUTimer *frame_timer; + QEMUBH *async_bh; + int64_t sof_time; + int64_t usb_frame_time; + int64_t usb_bit_time; + uint32_t usb_version; + uint16_t frame_number; + uint16_t fi; + uint16_t next_chan; + bool working; + USBPort uport; + DWC2Packet packet[DWC2_NB_CHAN]; /* one packet per chan */ + uint8_t usb_buf[DWC2_NB_CHAN][DWC2_MAX_XFER_SIZE]; /* one buffer per chan */ +}; + +struct DWC2Class { + /*< private >*/ + SysBusDeviceClass parent_class; + ResettablePhases parent_phases; + + /*< public >*/ +}; + +#define TYPE_DWC2_USB "dwc2-usb" +#define DWC2_USB(obj) \ + OBJECT_CHECK(DWC2State, (obj), TYPE_DWC2_USB) +#define DWC2_CLASS(klass) \ + OBJECT_CLASS_CHECK(DWC2Class, (klass), TYPE_DWC2_USB) +#define DWC2_GET_CLASS(obj) \ + OBJECT_GET_CLASS(DWC2Class, (obj), TYPE_DWC2_USB) + +#endif -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add the dwc-hsotg (dwc2) USB host controller emulation code. Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c. Note that to use this with the dwc-otg driver in the Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on the kernel command line. Emulation of slave mode and of descriptor-DMA mode has not been implemented yet. These modes are seldom used. I have used some on-line sources of information while developing this emulation, including: http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf which has a pretty complete description of the controller starting on page 370. https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf which has a description of the controller registers starting on page 130. Thanks to Felippe Mathieu-Daude for providing a cleaner method of implementing the memory regions for the controller registers. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-5-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++++++++++++ hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/trace-events | 50 ++ 4 files changed, 1473 insertions(+) create mode 100644 hw/usb/hcd-dwc2.c diff --git a/hw/usb/hcd-dwc2.c b/hw/usb/hcd-dwc2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc2.c @@ -XXX,XX +XXX,XX @@ +/* + * dwc-hsotg (dwc2) USB host controller emulation + * + * Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c + * + * Note that to use this emulation with the dwc-otg driver in the + * Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" + * on the kernel command line. + * + * Some useful documentation used to develop this emulation can be + * found online (as of April 2020) at: + * + * http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf + * which has a pretty complete description of the controller starting + * on page 370. + * + * https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf + * which has a description of the controller registers starting on + * page 130. + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "hw/usb/dwc2-regs.h" +#include "hw/usb/hcd-dwc2.h" +#include "migration/vmstate.h" +#include "trace.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "qemu/main-loop.h" +#include "hw/qdev-properties.h" + +#define USB_HZ_FS 12000000 +#define USB_HZ_HS 96000000 +#define USB_FRMINTVL 12000 + +/* nifty macros from Arnon's EHCI version */ +#define get_field(data, field) \ + (((data) & field##_MASK) >> field##_SHIFT) + +#define set_field(data, newval, field) do { \ + uint32_t val = *(data); \ + val &= ~field##_MASK; \ + val |= ((newval) << field##_SHIFT) & field##_MASK; \ + *(data) = val; \ +} while (0) + +#define get_bit(data, bitmask) \ + (!!((data) & (bitmask))) + +/* update irq line */ +static inline void dwc2_update_irq(DWC2State *s) +{ + static int oldlevel; + int level = 0; + + if ((s->gintsts & s->gintmsk) && (s->gahbcfg & GAHBCFG_GLBL_INTR_EN)) { + level = 1; + } + if (level != oldlevel) { + oldlevel = level; + trace_usb_dwc2_update_irq(level); + qemu_set_irq(s->irq, level); + } +} + +/* flag interrupt condition */ +static inline void dwc2_raise_global_irq(DWC2State *s, uint32_t intr) +{ + if (!(s->gintsts & intr)) { + s->gintsts |= intr; + trace_usb_dwc2_raise_global_irq(intr); + dwc2_update_irq(s); + } +} + +static inline void dwc2_lower_global_irq(DWC2State *s, uint32_t intr) +{ + if (s->gintsts & intr) { + s->gintsts &= ~intr; + trace_usb_dwc2_lower_global_irq(intr); + dwc2_update_irq(s); + } +} + +static inline void dwc2_raise_host_irq(DWC2State *s, uint32_t host_intr) +{ + if (!(s->haint & host_intr)) { + s->haint |= host_intr; + s->haint &= 0xffff; + trace_usb_dwc2_raise_host_irq(host_intr); + if (s->haint & s->haintmsk) { + dwc2_raise_global_irq(s, GINTSTS_HCHINT); + } + } +} + +static inline void dwc2_lower_host_irq(DWC2State *s, uint32_t host_intr) +{ + if (s->haint & host_intr) { + s->haint &= ~host_intr; + trace_usb_dwc2_lower_host_irq(host_intr); + if (!(s->haint & s->haintmsk)) { + dwc2_lower_global_irq(s, GINTSTS_HCHINT); + } + } +} + +static inline void dwc2_update_hc_irq(DWC2State *s, int index) +{ + uint32_t host_intr = 1 << (index >> 3); + + if (s->hreg1[index + 2] & s->hreg1[index + 3]) { + dwc2_raise_host_irq(s, host_intr); + } else { + dwc2_lower_host_irq(s, host_intr); + } +} + +/* set a timer for EOF */ +static void dwc2_eof_timer(DWC2State *s) +{ + timer_mod(s->eof_timer, s->sof_time + s->usb_frame_time); +} + +/* Set a timer for EOF and generate SOF event */ +static void dwc2_sof(DWC2State *s) +{ + s->sof_time += s->usb_frame_time; + trace_usb_dwc2_sof(s->sof_time); + dwc2_eof_timer(s); + dwc2_raise_global_irq(s, GINTSTS_SOF); +} + +/* Do frame processing on frame boundary */ +static void dwc2_frame_boundary(void *opaque) +{ + DWC2State *s = opaque; + int64_t now; + uint16_t frcnt; + + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + /* Frame boundary, so do EOF stuff here */ + + /* Increment frame number */ + frcnt = (uint16_t)((now - s->sof_time) / s->fi); + s->frame_number = (s->frame_number + frcnt) & 0xffff; + s->hfnum = s->frame_number & HFNUM_MAX_FRNUM; + + /* Do SOF stuff here */ + dwc2_sof(s); +} + +/* Start sending SOF tokens on the USB bus */ +static void dwc2_bus_start(DWC2State *s) +{ + trace_usb_dwc2_bus_start(); + s->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + dwc2_eof_timer(s); +} + +/* Stop sending SOF tokens on the USB bus */ +static void dwc2_bus_stop(DWC2State *s) +{ + trace_usb_dwc2_bus_stop(); + timer_del(s->eof_timer); +} + +static USBDevice *dwc2_find_device(DWC2State *s, uint8_t addr) +{ + USBDevice *dev; + + trace_usb_dwc2_find_device(addr); + + if (!(s->hprt0 & HPRT0_ENA)) { + trace_usb_dwc2_port_disabled(0); + } else { + dev = usb_find_device(&s->uport, addr); + if (dev != NULL) { + trace_usb_dwc2_device_found(0); + return dev; + } + } + + trace_usb_dwc2_device_not_found(); + return NULL; +} + +static const char *pstatus[] = { + "USB_RET_SUCCESS", "USB_RET_NODEV", "USB_RET_NAK", "USB_RET_STALL", + "USB_RET_BABBLE", "USB_RET_IOERROR", "USB_RET_ASYNC", + "USB_RET_ADD_TO_QUEUE", "USB_RET_REMOVE_FROM_QUEUE" +}; + +static uint32_t pintr[] = { + HCINTMSK_XFERCOMPL, HCINTMSK_XACTERR, HCINTMSK_NAK, HCINTMSK_STALL, + HCINTMSK_BBLERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, + HCINTMSK_XACTERR +}; + +static const char *types[] = { + "Ctrl", "Isoc", "Bulk", "Intr" +}; + +static const char *dirs[] = { + "Out", "In" +}; + +static void dwc2_handle_packet(DWC2State *s, uint32_t devadr, USBDevice *dev, + USBEndpoint *ep, uint32_t index, bool send) +{ + DWC2Packet *p; + uint32_t hcchar = s->hreg1[index]; + uint32_t hctsiz = s->hreg1[index + 4]; + uint32_t hcdma = s->hreg1[index + 5]; + uint32_t chan, epnum, epdir, eptype, mps, pid, pcnt, len, tlen, intr = 0; + uint32_t tpcnt, stsidx, actual = 0; + bool do_intr = false, done = false; + + epnum = get_field(hcchar, HCCHAR_EPNUM); + epdir = get_bit(hcchar, HCCHAR_EPDIR); + eptype = get_field(hcchar, HCCHAR_EPTYPE); + mps = get_field(hcchar, HCCHAR_MPS); + pid = get_field(hctsiz, TSIZ_SC_MC_PID); + pcnt = get_field(hctsiz, TSIZ_PKTCNT); + len = get_field(hctsiz, TSIZ_XFERSIZE); + assert(len <= DWC2_MAX_XFER_SIZE); + chan = index >> 3; + p = &s->packet[chan]; + + trace_usb_dwc2_handle_packet(chan, dev, &p->packet, epnum, types[eptype], + dirs[epdir], mps, len, pcnt); + + if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { + pid = USB_TOKEN_SETUP; + } else { + pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; + } + + if (send) { + tlen = len; + if (p->small) { + if (tlen > mps) { + tlen = mps; + } + } + + if (pid != USB_TOKEN_IN) { + trace_usb_dwc2_memory_read(hcdma, tlen); + if (dma_memory_read(&s->dma_as, hcdma, + s->usb_buf[chan], tlen) != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_read failed\n", + __func__); + } + } + + usb_packet_init(&p->packet); + usb_packet_setup(&p->packet, pid, ep, 0, hcdma, + pid != USB_TOKEN_IN, true); + usb_packet_addbuf(&p->packet, s->usb_buf[chan], tlen); + p->async = DWC2_ASYNC_NONE; + usb_handle_packet(dev, &p->packet); + } else { + tlen = p->len; + } + + stsidx = -p->packet.status; + assert(stsidx < sizeof(pstatus) / sizeof(*pstatus)); + actual = p->packet.actual_length; + trace_usb_dwc2_packet_status(pstatus[stsidx], actual); + +babble: + if (p->packet.status != USB_RET_SUCCESS && + p->packet.status != USB_RET_NAK && + p->packet.status != USB_RET_STALL && + p->packet.status != USB_RET_ASYNC) { + trace_usb_dwc2_packet_error(pstatus[stsidx]); + } + + if (p->packet.status == USB_RET_ASYNC) { + trace_usb_dwc2_async_packet(&p->packet, chan, dev, epnum, + dirs[epdir], tlen); + usb_device_flush_ep_queue(dev, ep); + assert(p->async != DWC2_ASYNC_INFLIGHT); + p->devadr = devadr; + p->epnum = epnum; + p->epdir = epdir; + p->mps = mps; + p->pid = pid; + p->index = index; + p->pcnt = pcnt; + p->len = tlen; + p->async = DWC2_ASYNC_INFLIGHT; + p->needs_service = false; + return; + } + + if (p->packet.status == USB_RET_SUCCESS) { + if (actual > tlen) { + p->packet.status = USB_RET_BABBLE; + goto babble; + } + + if (pid == USB_TOKEN_IN) { + trace_usb_dwc2_memory_write(hcdma, actual); + if (dma_memory_write(&s->dma_as, hcdma, s->usb_buf[chan], + actual) != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_write failed\n", + __func__); + } + } + + tpcnt = actual / mps; + if (actual % mps) { + tpcnt++; + if (pid == USB_TOKEN_IN) { + done = true; + } + } + + pcnt -= tpcnt < pcnt ? tpcnt : pcnt; + set_field(&hctsiz, pcnt, TSIZ_PKTCNT); + len -= actual < len ? actual : len; + set_field(&hctsiz, len, TSIZ_XFERSIZE); + s->hreg1[index + 4] = hctsiz; + hcdma += actual; + s->hreg1[index + 5] = hcdma; + + if (!pcnt || len == 0 || actual == 0) { + done = true; + } + } else { + intr |= pintr[stsidx]; + if (p->packet.status == USB_RET_NAK && + (eptype == USB_ENDPOINT_XFER_CONTROL || + eptype == USB_ENDPOINT_XFER_BULK)) { + /* + * for ctrl/bulk, automatically retry on NAK, + * but send the interrupt anyway + */ + intr &= ~HCINTMSK_RESERVED14_31; + s->hreg1[index + 2] |= intr; + do_intr = true; + } else { + intr |= HCINTMSK_CHHLTD; + done = true; + } + } + + usb_packet_cleanup(&p->packet); + + if (done) { + hcchar &= ~HCCHAR_CHENA; + s->hreg1[index] = hcchar; + if (!(intr & HCINTMSK_CHHLTD)) { + intr |= HCINTMSK_CHHLTD | HCINTMSK_XFERCOMPL; + } + intr &= ~HCINTMSK_RESERVED14_31; + s->hreg1[index + 2] |= intr; + p->needs_service = false; + trace_usb_dwc2_packet_done(pstatus[stsidx], actual, len, pcnt); + dwc2_update_hc_irq(s, index); + return; + } + + p->devadr = devadr; + p->epnum = epnum; + p->epdir = epdir; + p->mps = mps; + p->pid = pid; + p->index = index; + p->pcnt = pcnt; + p->len = len; + p->needs_service = true; + trace_usb_dwc2_packet_next(pstatus[stsidx], len, pcnt); + if (do_intr) { + dwc2_update_hc_irq(s, index); + } +} + +/* Attach or detach a device on root hub */ + +static const char *speeds[] = { + "low", "full", "high" +}; + +static void dwc2_attach(USBPort *port) +{ + DWC2State *s = port->opaque; + int hispd = 0; + + trace_usb_dwc2_attach(port); + assert(port->index == 0); + + if (!port->dev || !port->dev->attached) { + return; + } + + assert(port->dev->speed <= USB_SPEED_HIGH); + trace_usb_dwc2_attach_speed(speeds[port->dev->speed]); + s->hprt0 &= ~HPRT0_SPD_MASK; + + switch (port->dev->speed) { + case USB_SPEED_LOW: + s->hprt0 |= HPRT0_SPD_LOW_SPEED << HPRT0_SPD_SHIFT; + break; + case USB_SPEED_FULL: + s->hprt0 |= HPRT0_SPD_FULL_SPEED << HPRT0_SPD_SHIFT; + break; + case USB_SPEED_HIGH: + s->hprt0 |= HPRT0_SPD_HIGH_SPEED << HPRT0_SPD_SHIFT; + hispd = 1; + break; + } + + if (hispd) { + s->usb_frame_time = NANOSECONDS_PER_SECOND / 8000; /* 125000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_HS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_HS; /* 10.4 */ + } else { + s->usb_bit_time = 1; + } + } else { + s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ + } else { + s->usb_bit_time = 1; + } + } + + s->fi = USB_FRMINTVL - 1; + s->hprt0 |= HPRT0_CONNDET | HPRT0_CONNSTS; + + dwc2_bus_start(s); + dwc2_raise_global_irq(s, GINTSTS_PRTINT); +} + +static void dwc2_detach(USBPort *port) +{ + DWC2State *s = port->opaque; + + trace_usb_dwc2_detach(port); + assert(port->index == 0); + + dwc2_bus_stop(s); + + s->hprt0 &= ~(HPRT0_SPD_MASK | HPRT0_SUSP | HPRT0_ENA | HPRT0_CONNSTS); + s->hprt0 |= HPRT0_CONNDET | HPRT0_ENACHG; + + dwc2_raise_global_irq(s, GINTSTS_PRTINT); +} + +static void dwc2_child_detach(USBPort *port, USBDevice *child) +{ + trace_usb_dwc2_child_detach(port, child); + assert(port->index == 0); +} + +static void dwc2_wakeup(USBPort *port) +{ + DWC2State *s = port->opaque; + + trace_usb_dwc2_wakeup(port); + assert(port->index == 0); + + if (s->hprt0 & HPRT0_SUSP) { + s->hprt0 |= HPRT0_RES; + dwc2_raise_global_irq(s, GINTSTS_PRTINT); + } + + qemu_bh_schedule(s->async_bh); +} + +static void dwc2_async_packet_complete(USBPort *port, USBPacket *packet) +{ + DWC2State *s = port->opaque; + DWC2Packet *p; + USBDevice *dev; + USBEndpoint *ep; + + assert(port->index == 0); + p = container_of(packet, DWC2Packet, packet); + dev = dwc2_find_device(s, p->devadr); + ep = usb_ep_get(dev, p->pid, p->epnum); + trace_usb_dwc2_async_packet_complete(port, packet, p->index >> 3, dev, + p->epnum, dirs[p->epdir], p->len); + assert(p->async == DWC2_ASYNC_INFLIGHT); + + if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { + usb_cancel_packet(packet); + usb_packet_cleanup(packet); + return; + } + + dwc2_handle_packet(s, p->devadr, dev, ep, p->index, false); + + p->async = DWC2_ASYNC_FINISHED; + qemu_bh_schedule(s->async_bh); +} + +static USBPortOps dwc2_port_ops = { + .attach = dwc2_attach, + .detach = dwc2_detach, + .child_detach = dwc2_child_detach, + .wakeup = dwc2_wakeup, + .complete = dwc2_async_packet_complete, +}; + +static uint32_t dwc2_get_frame_remaining(DWC2State *s) +{ + uint32_t fr = 0; + int64_t tks; + + tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - s->sof_time; + if (tks < 0) { + tks = 0; + } + + /* avoid muldiv if possible */ + if (tks >= s->usb_frame_time) { + goto out; + } + if (tks < s->usb_bit_time) { + fr = s->fi; + goto out; + } + + /* tks = number of ns since SOF, divided by 83 (fs) or 10 (hs) */ + tks = tks / s->usb_bit_time; + if (tks >= (int64_t)s->fi) { + goto out; + } + + /* remaining = frame interval minus tks */ + fr = (uint32_t)((int64_t)s->fi - tks); + +out: + return fr; +} + +static void dwc2_work_bh(void *opaque) +{ + DWC2State *s = opaque; + DWC2Packet *p; + USBDevice *dev; + USBEndpoint *ep; + int64_t t_now, expire_time; + int chan; + bool found = false; + + trace_usb_dwc2_work_bh(); + if (s->working) { + return; + } + s->working = true; + + t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + chan = s->next_chan; + + do { + p = &s->packet[chan]; + if (p->needs_service) { + dev = dwc2_find_device(s, p->devadr); + ep = usb_ep_get(dev, p->pid, p->epnum); + trace_usb_dwc2_work_bh_service(s->next_chan, chan, dev, p->epnum); + dwc2_handle_packet(s, p->devadr, dev, ep, p->index, true); + found = true; + } + if (++chan == DWC2_NB_CHAN) { + chan = 0; + } + if (found) { + s->next_chan = chan; + trace_usb_dwc2_work_bh_next(chan); + } + } while (chan != s->next_chan); + + if (found) { + expire_time = t_now + NANOSECONDS_PER_SECOND / 4000; + timer_mod(s->frame_timer, expire_time); + } + s->working = false; +} + +static void dwc2_enable_chan(DWC2State *s, uint32_t index) +{ + USBDevice *dev; + USBEndpoint *ep; + uint32_t hcchar; + uint32_t hctsiz; + uint32_t devadr, epnum, epdir, eptype, pid, len; + DWC2Packet *p; + + assert((index >> 3) < DWC2_NB_CHAN); + p = &s->packet[index >> 3]; + hcchar = s->hreg1[index]; + hctsiz = s->hreg1[index + 4]; + devadr = get_field(hcchar, HCCHAR_DEVADDR); + epnum = get_field(hcchar, HCCHAR_EPNUM); + epdir = get_bit(hcchar, HCCHAR_EPDIR); + eptype = get_field(hcchar, HCCHAR_EPTYPE); + pid = get_field(hctsiz, TSIZ_SC_MC_PID); + len = get_field(hctsiz, TSIZ_XFERSIZE); + + dev = dwc2_find_device(s, devadr); + + trace_usb_dwc2_enable_chan(index >> 3, dev, &p->packet, epnum); + if (dev == NULL) { + return; + } + + if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { + pid = USB_TOKEN_SETUP; + } else { + pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; + } + + ep = usb_ep_get(dev, pid, epnum); + + /* + * Hack: Networking doesn't like us delivering large transfers, it kind + * of works but the latency is horrible. So if the transfer is <= the mtu + * size, we take that as a hint that this might be a network transfer, + * and do the transfer packet-by-packet. + */ + if (len > 1536) { + p->small = false; + } else { + p->small = true; + } + + dwc2_handle_packet(s, devadr, dev, ep, index, true); + qemu_bh_schedule(s->async_bh); +} + +static const char *glbregnm[] = { + "GOTGCTL ", "GOTGINT ", "GAHBCFG ", "GUSBCFG ", "GRSTCTL ", + "GINTSTS ", "GINTMSK ", "GRXSTSR ", "GRXSTSP ", "GRXFSIZ ", + "GNPTXFSIZ", "GNPTXSTS ", "GI2CCTL ", "GPVNDCTL ", "GGPIO ", + "GUID ", "GSNPSID ", "GHWCFG1 ", "GHWCFG2 ", "GHWCFG3 ", + "GHWCFG4 ", "GLPMCFG ", "GPWRDN ", "GDFIFOCFG", "GADPCTL ", + "GREFCLK ", "GINTMSK2 ", "GINTSTS2 " +}; + +static uint64_t dwc2_glbreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr <= GINTSTS2); + val = s->glbreg[index]; + + switch (addr) { + case GRSTCTL: + /* clear any self-clearing bits that were set */ + val &= ~(GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | GRSTCTL_IN_TKNQ_FLSH | + GRSTCTL_FRMCNTRRST | GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); + s->glbreg[index] = val; + break; + default: + break; + } + + trace_usb_dwc2_glbreg_read(addr, glbregnm[index], val); + return val; +} + +static void dwc2_glbreg_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + int iflg = 0; + + assert(addr <= GINTSTS2); + mmio = &s->glbreg[index]; + old = *mmio; + + switch (addr) { + case GOTGCTL: + /* don't allow setting of read-only bits */ + val &= ~(GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | + GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | + GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); + /* don't allow clearing of read-only bits */ + val |= old & (GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | + GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | + GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); + break; + case GAHBCFG: + if ((val & GAHBCFG_GLBL_INTR_EN) && !(old & GAHBCFG_GLBL_INTR_EN)) { + iflg = 1; + } + break; + case GRSTCTL: + val |= GRSTCTL_AHBIDLE; + val &= ~GRSTCTL_DMAREQ; + if (!(old & GRSTCTL_TXFFLSH) && (val & GRSTCTL_TXFFLSH)) { + /* TODO - TX fifo flush */ + qemu_log_mask(LOG_UNIMP, "Tx FIFO flush not implemented\n"); + } + if (!(old & GRSTCTL_RXFFLSH) && (val & GRSTCTL_RXFFLSH)) { + /* TODO - RX fifo flush */ + qemu_log_mask(LOG_UNIMP, "Rx FIFO flush not implemented\n"); + } + if (!(old & GRSTCTL_IN_TKNQ_FLSH) && (val & GRSTCTL_IN_TKNQ_FLSH)) { + /* TODO - device IN token queue flush */ + qemu_log_mask(LOG_UNIMP, "Token queue flush not implemented\n"); + } + if (!(old & GRSTCTL_FRMCNTRRST) && (val & GRSTCTL_FRMCNTRRST)) { + /* TODO - host frame counter reset */ + qemu_log_mask(LOG_UNIMP, "Frame counter reset not implemented\n"); + } + if (!(old & GRSTCTL_HSFTRST) && (val & GRSTCTL_HSFTRST)) { + /* TODO - host soft reset */ + qemu_log_mask(LOG_UNIMP, "Host soft reset not implemented\n"); + } + if (!(old & GRSTCTL_CSFTRST) && (val & GRSTCTL_CSFTRST)) { + /* TODO - core soft reset */ + qemu_log_mask(LOG_UNIMP, "Core soft reset not implemented\n"); + } + /* don't allow clearing of self-clearing bits */ + val |= old & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | + GRSTCTL_IN_TKNQ_FLSH | GRSTCTL_FRMCNTRRST | + GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); + break; + case GINTSTS: + /* clear the write-1-to-clear bits */ + val |= ~old; + val = ~val; + /* don't allow clearing of read-only bits */ + val |= old & (GINTSTS_PTXFEMP | GINTSTS_HCHINT | GINTSTS_PRTINT | + GINTSTS_OEPINT | GINTSTS_IEPINT | GINTSTS_GOUTNAKEFF | + GINTSTS_GINNAKEFF | GINTSTS_NPTXFEMP | GINTSTS_RXFLVL | + GINTSTS_OTGINT | GINTSTS_CURMODE_HOST); + iflg = 1; + break; + case GINTMSK: + iflg = 1; + break; + default: + break; + } + + trace_usb_dwc2_glbreg_write(addr, glbregnm[index], orig, old, val); + *mmio = val; + + if (iflg) { + dwc2_update_irq(s); + } +} + +static uint64_t dwc2_fszreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr == HPTXFSIZ); + val = s->fszreg[index]; + + trace_usb_dwc2_fszreg_read(addr, val); + return val; +} + +static void dwc2_fszreg_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + + assert(addr == HPTXFSIZ); + mmio = &s->fszreg[index]; + old = *mmio; + + trace_usb_dwc2_fszreg_write(addr, orig, old, val); + *mmio = val; +} + +static const char *hreg0nm[] = { + "HCFG ", "HFIR ", "HFNUM ", "<rsvd> ", "HPTXSTS ", + "HAINT ", "HAINTMSK ", "HFLBADDR ", "<rsvd> ", "<rsvd> ", + "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", + "<rsvd> ", "HPRT0 " +}; + +static uint64_t dwc2_hreg0_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= HCFG && addr <= HPRT0); + val = s->hreg0[index]; + + switch (addr) { + case HFNUM: + val = (dwc2_get_frame_remaining(s) << HFNUM_FRREM_SHIFT) | + (s->hfnum << HFNUM_FRNUM_SHIFT); + break; + default: + break; + } + + trace_usb_dwc2_hreg0_read(addr, hreg0nm[index], val); + return val; +} + +static void dwc2_hreg0_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + USBDevice *dev = s->uport.dev; + uint64_t orig = val; + uint32_t *mmio; + uint32_t tval, told, old; + int prst = 0; + int iflg = 0; + + assert(addr >= HCFG && addr <= HPRT0); + mmio = &s->hreg0[index]; + old = *mmio; + + switch (addr) { + case HFIR: + break; + case HFNUM: + case HPTXSTS: + case HAINT: + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", + __func__); + return; + case HAINTMSK: + val &= 0xffff; + break; + case HPRT0: + /* don't allow clearing of read-only bits */ + val |= old & (HPRT0_SPD_MASK | HPRT0_LNSTS_MASK | HPRT0_OVRCURRACT | + HPRT0_CONNSTS); + /* don't allow clearing of self-clearing bits */ + val |= old & (HPRT0_SUSP | HPRT0_RES); + /* don't allow setting of self-setting bits */ + if (!(old & HPRT0_ENA) && (val & HPRT0_ENA)) { + val &= ~HPRT0_ENA; + } + /* clear the write-1-to-clear bits */ + tval = val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + told = old & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + tval |= ~told; + tval = ~tval; + tval &= (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + val &= ~(HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + val |= tval; + if (!(val & HPRT0_RST) && (old & HPRT0_RST)) { + if (dev && dev->attached) { + val |= HPRT0_ENA | HPRT0_ENACHG; + prst = 1; + } + } + if (val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_CONNDET)) { + iflg = 1; + } else { + iflg = -1; + } + break; + default: + break; + } + + if (prst) { + trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, + val & ~HPRT0_CONNDET); + trace_usb_dwc2_hreg0_action("call usb_port_reset"); + usb_port_reset(&s->uport); + val &= ~HPRT0_CONNDET; + } else { + trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, val); + } + + *mmio = val; + + if (iflg > 0) { + trace_usb_dwc2_hreg0_action("enable PRTINT"); + dwc2_raise_global_irq(s, GINTSTS_PRTINT); + } else if (iflg < 0) { + trace_usb_dwc2_hreg0_action("disable PRTINT"); + dwc2_lower_global_irq(s, GINTSTS_PRTINT); + } +} + +static const char *hreg1nm[] = { + "HCCHAR ", "HCSPLT ", "HCINT ", "HCINTMSK", "HCTSIZ ", "HCDMA ", + "<rsvd> ", "HCDMAB " +}; + +static uint64_t dwc2_hreg1_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); + val = s->hreg1[index]; + + trace_usb_dwc2_hreg1_read(addr, hreg1nm[index & 7], addr >> 5, val); + return val; +} + +static void dwc2_hreg1_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + int iflg = 0; + int enflg = 0; + int disflg = 0; + + assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); + mmio = &s->hreg1[index]; + old = *mmio; + + switch (HSOTG_REG(0x500) + (addr & 0x1c)) { + case HCCHAR(0): + if ((val & HCCHAR_CHDIS) && !(old & HCCHAR_CHDIS)) { + val &= ~(HCCHAR_CHENA | HCCHAR_CHDIS); + disflg = 1; + } else { + val |= old & HCCHAR_CHDIS; + if ((val & HCCHAR_CHENA) && !(old & HCCHAR_CHENA)) { + val &= ~HCCHAR_CHDIS; + enflg = 1; + } else { + val |= old & HCCHAR_CHENA; + } + } + break; + case HCINT(0): + /* clear the write-1-to-clear bits */ + val |= ~old; + val = ~val; + val &= ~HCINTMSK_RESERVED14_31; + iflg = 1; + break; + case HCINTMSK(0): + val &= ~HCINTMSK_RESERVED14_31; + iflg = 1; + break; + case HCDMAB(0): + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", + __func__); + return; + default: + break; + } + + trace_usb_dwc2_hreg1_write(addr, hreg1nm[index & 7], index >> 3, orig, + old, val); + *mmio = val; + + if (disflg) { + /* set ChHltd in HCINT */ + s->hreg1[(index & ~7) + 2] |= HCINTMSK_CHHLTD; + iflg = 1; + } + + if (enflg) { + dwc2_enable_chan(s, index & ~7); + } + + if (iflg) { + dwc2_update_hc_irq(s, index & ~7); + } +} + +static const char *pcgregnm[] = { + "PCGCTL ", "PCGCCTL1 " +}; + +static uint64_t dwc2_pcgreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= PCGCTL && addr <= PCGCCTL1); + val = s->pcgreg[index]; + + trace_usb_dwc2_pcgreg_read(addr, pcgregnm[index], val); + return val; +} + +static void dwc2_pcgreg_write(void *ptr, hwaddr addr, int index, + uint64_t val, unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + + assert(addr >= PCGCTL && addr <= PCGCCTL1); + mmio = &s->pcgreg[index]; + old = *mmio; + + trace_usb_dwc2_pcgreg_write(addr, pcgregnm[index], orig, old, val); + *mmio = val; +} + +static uint64_t dwc2_hsotg_read(void *ptr, hwaddr addr, unsigned size) +{ + uint64_t val; + + switch (addr) { + case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): + val = dwc2_glbreg_read(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, size); + break; + case HSOTG_REG(0x100): + val = dwc2_fszreg_read(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, size); + break; + case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): + /* Gadget-mode registers, just return 0 for now */ + val = 0; + break; + case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): + val = dwc2_hreg0_read(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, size); + break; + case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): + val = dwc2_hreg1_read(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, size); + break; + case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): + /* Gadget-mode registers, just return 0 for now */ + val = 0; + break; + case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): + val = dwc2_pcgreg_read(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, size); + break; + default: + g_assert_not_reached(); + } + + return val; +} + +static void dwc2_hsotg_write(void *ptr, hwaddr addr, uint64_t val, + unsigned size) +{ + switch (addr) { + case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): + dwc2_glbreg_write(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, val, size); + break; + case HSOTG_REG(0x100): + dwc2_fszreg_write(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, val, size); + break; + case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): + /* Gadget-mode registers, do nothing for now */ + break; + case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): + dwc2_hreg0_write(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, val, size); + break; + case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): + dwc2_hreg1_write(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, val, size); + break; + case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): + /* Gadget-mode registers, do nothing for now */ + break; + case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): + dwc2_pcgreg_write(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, val, size); + break; + default: + g_assert_not_reached(); + } +} + +static const MemoryRegionOps dwc2_mmio_hsotg_ops = { + .read = dwc2_hsotg_read, + .write = dwc2_hsotg_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static uint64_t dwc2_hreg2_read(void *ptr, hwaddr addr, unsigned size) +{ + /* TODO - implement FIFOs to support slave mode */ + trace_usb_dwc2_hreg2_read(addr, addr >> 12, 0); + qemu_log_mask(LOG_UNIMP, "FIFO read not implemented\n"); + return 0; +} + +static void dwc2_hreg2_write(void *ptr, hwaddr addr, uint64_t val, + unsigned size) +{ + uint64_t orig = val; + + /* TODO - implement FIFOs to support slave mode */ + trace_usb_dwc2_hreg2_write(addr, addr >> 12, orig, 0, val); + qemu_log_mask(LOG_UNIMP, "FIFO write not implemented\n"); +} + +static const MemoryRegionOps dwc2_mmio_hreg2_ops = { + .read = dwc2_hreg2_read, + .write = dwc2_hreg2_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void dwc2_wakeup_endpoint(USBBus *bus, USBEndpoint *ep, + unsigned int stream) +{ + DWC2State *s = container_of(bus, DWC2State, bus); + + trace_usb_dwc2_wakeup_endpoint(ep, stream); + + /* TODO - do something here? */ + qemu_bh_schedule(s->async_bh); +} + +static USBBusOps dwc2_bus_ops = { + .wakeup_endpoint = dwc2_wakeup_endpoint, +}; + +static void dwc2_work_timer(void *opaque) +{ + DWC2State *s = opaque; + + trace_usb_dwc2_work_timer(); + qemu_bh_schedule(s->async_bh); +} + +static void dwc2_reset_enter(Object *obj, ResetType type) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + int i; + + trace_usb_dwc2_reset_enter(); + + if (c->parent_phases.enter) { + c->parent_phases.enter(obj, type); + } + + timer_del(s->frame_timer); + qemu_bh_cancel(s->async_bh); + + if (s->uport.dev && s->uport.dev->attached) { + usb_detach(&s->uport); + } + + dwc2_bus_stop(s); + + s->gotgctl = GOTGCTL_BSESVLD | GOTGCTL_ASESVLD | GOTGCTL_CONID_B; + s->gotgint = 0; + s->gahbcfg = 0; + s->gusbcfg = 5 << GUSBCFG_USBTRDTIM_SHIFT; + s->grstctl = GRSTCTL_AHBIDLE; + s->gintsts = GINTSTS_CONIDSTSCHNG | GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | + GINTSTS_CURMODE_HOST; + s->gintmsk = 0; + s->grxstsr = 0; + s->grxstsp = 0; + s->grxfsiz = 1024; + s->gnptxfsiz = 1024 << FIFOSIZE_DEPTH_SHIFT; + s->gnptxsts = (4 << FIFOSIZE_DEPTH_SHIFT) | 1024; + s->gi2cctl = GI2CCTL_I2CDATSE0 | GI2CCTL_ACK; + s->gpvndctl = 0; + s->ggpio = 0; + s->guid = 0; + s->gsnpsid = 0x4f54294a; + s->ghwcfg1 = 0; + s->ghwcfg2 = (8 << GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT) | + (4 << GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT) | + (4 << GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT) | + GHWCFG2_DYNAMIC_FIFO | + GHWCFG2_PERIO_EP_SUPPORTED | + ((DWC2_NB_CHAN - 1) << GHWCFG2_NUM_HOST_CHAN_SHIFT) | + (GHWCFG2_INT_DMA_ARCH << GHWCFG2_ARCHITECTURE_SHIFT) | + (GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST << GHWCFG2_OP_MODE_SHIFT); + s->ghwcfg3 = (4096 << GHWCFG3_DFIFO_DEPTH_SHIFT) | + (4 << GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT) | + (4 << GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT); + s->ghwcfg4 = 0; + s->glpmcfg = 0; + s->gpwrdn = GPWRDN_PWRDNRSTN; + s->gdfifocfg = 0; + s->gadpctl = 0; + s->grefclk = 0; + s->gintmsk2 = 0; + s->gintsts2 = 0; + + s->hptxfsiz = 500 << FIFOSIZE_DEPTH_SHIFT; + + s->hcfg = 2 << HCFG_RESVALID_SHIFT; + s->hfir = 60000; + s->hfnum = 0x3fff; + s->hptxsts = (16 << TXSTS_QSPCAVAIL_SHIFT) | 32768; + s->haint = 0; + s->haintmsk = 0; + s->hprt0 = 0; + + memset(s->hreg1, 0, sizeof(s->hreg1)); + memset(s->pcgreg, 0, sizeof(s->pcgreg)); + + s->sof_time = 0; + s->frame_number = 0; + s->fi = USB_FRMINTVL - 1; + s->next_chan = 0; + s->working = false; + + for (i = 0; i < DWC2_NB_CHAN; i++) { + s->packet[i].needs_service = false; + } +} + +static void dwc2_reset_hold(Object *obj) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + + trace_usb_dwc2_reset_hold(); + + if (c->parent_phases.hold) { + c->parent_phases.hold(obj); + } + + dwc2_update_irq(s); +} + +static void dwc2_reset_exit(Object *obj) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + + trace_usb_dwc2_reset_exit(); + + if (c->parent_phases.exit) { + c->parent_phases.exit(obj); + } + + s->hprt0 = HPRT0_PWR; + if (s->uport.dev && s->uport.dev->attached) { + usb_attach(&s->uport); + usb_device_reset(s->uport.dev); + } +} + +static void dwc2_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + DWC2State *s = DWC2_USB(dev); + Object *obj; + Error *err = NULL; + + obj = object_property_get_link(OBJECT(dev), "dma-mr", &err); + if (err) { + error_setg(errp, "dwc2: required dma-mr link not found: %s", + error_get_pretty(err)); + return; + } + assert(obj != NULL); + + s->dma_mr = MEMORY_REGION(obj); + address_space_init(&s->dma_as, s->dma_mr, "dwc2"); + + usb_bus_new(&s->bus, sizeof(s->bus), &dwc2_bus_ops, dev); + usb_register_port(&s->bus, &s->uport, s, 0, &dwc2_port_ops, + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL | + (s->usb_version == 2 ? USB_SPEED_MASK_HIGH : 0)); + s->uport.dev = 0; + + s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ + } else { + s->usb_bit_time = 1; + } + + s->fi = USB_FRMINTVL - 1; + s->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_frame_boundary, s); + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_work_timer, s); + s->async_bh = qemu_bh_new(dwc2_work_bh, s); + + sysbus_init_irq(sbd, &s->irq); +} + +static void dwc2_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DWC2State *s = DWC2_USB(obj); + + memory_region_init(&s->container, obj, "dwc2", DWC2_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->container); + + memory_region_init_io(&s->hsotg, obj, &dwc2_mmio_hsotg_ops, s, + "dwc2-io", 4 * KiB); + memory_region_add_subregion(&s->container, 0x0000, &s->hsotg); + + memory_region_init_io(&s->fifos, obj, &dwc2_mmio_hreg2_ops, s, + "dwc2-fifo", 64 * KiB); + memory_region_add_subregion(&s->container, 0x1000, &s->fifos); +} + +static const VMStateDescription vmstate_dwc2_state_packet = { + .name = "dwc2/packet", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(devadr, DWC2Packet), + VMSTATE_UINT32(epnum, DWC2Packet), + VMSTATE_UINT32(epdir, DWC2Packet), + VMSTATE_UINT32(mps, DWC2Packet), + VMSTATE_UINT32(pid, DWC2Packet), + VMSTATE_UINT32(index, DWC2Packet), + VMSTATE_UINT32(pcnt, DWC2Packet), + VMSTATE_UINT32(len, DWC2Packet), + VMSTATE_INT32(async, DWC2Packet), + VMSTATE_BOOL(small, DWC2Packet), + VMSTATE_BOOL(needs_service, DWC2Packet), + VMSTATE_END_OF_LIST() + }, +}; + +const VMStateDescription vmstate_dwc2_state = { + .name = "dwc2", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(glbreg, DWC2State, + DWC2_GLBREG_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(fszreg, DWC2State, + DWC2_FSZREG_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(hreg0, DWC2State, + DWC2_HREG0_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(hreg1, DWC2State, + DWC2_HREG1_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(pcgreg, DWC2State, + DWC2_PCGREG_SIZE / sizeof(uint32_t)), + + VMSTATE_TIMER_PTR(eof_timer, DWC2State), + VMSTATE_TIMER_PTR(frame_timer, DWC2State), + VMSTATE_INT64(sof_time, DWC2State), + VMSTATE_INT64(usb_frame_time, DWC2State), + VMSTATE_INT64(usb_bit_time, DWC2State), + VMSTATE_UINT32(usb_version, DWC2State), + VMSTATE_UINT16(frame_number, DWC2State), + VMSTATE_UINT16(fi, DWC2State), + VMSTATE_UINT16(next_chan, DWC2State), + VMSTATE_BOOL(working, DWC2State), + + VMSTATE_STRUCT_ARRAY(packet, DWC2State, DWC2_NB_CHAN, 1, + vmstate_dwc2_state_packet, DWC2Packet), + VMSTATE_UINT8_2DARRAY(usb_buf, DWC2State, DWC2_NB_CHAN, + DWC2_MAX_XFER_SIZE), + + VMSTATE_END_OF_LIST() + } +}; + +static Property dwc2_usb_properties[] = { + DEFINE_PROP_UINT32("usb_version", DWC2State, usb_version, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void dwc2_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + DWC2Class *c = DWC2_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->realize = dwc2_realize; + dc->vmsd = &vmstate_dwc2_state; + set_bit(DEVICE_CATEGORY_USB, dc->categories); + device_class_set_props(dc, dwc2_usb_properties); + resettable_class_set_parent_phases(rc, dwc2_reset_enter, dwc2_reset_hold, + dwc2_reset_exit, &c->parent_phases); +} + +static const TypeInfo dwc2_usb_type_info = { + .name = TYPE_DWC2_USB, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(DWC2State), + .instance_init = dwc2_init, + .class_size = sizeof(DWC2Class), + .class_init = dwc2_class_init, +}; + +static void dwc2_usb_register_types(void) +{ + type_register_static(&dwc2_usb_type_info); +} + +type_init(dwc2_usb_register_types) diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Kconfig +++ b/hw/usb/Kconfig @@ -XXX,XX +XXX,XX @@ config USB_MUSB bool select USB +config USB_DWC2 + bool + default y + select USB + config TUSB6010 bool select USB_MUSB diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Makefile.objs +++ b/hw/usb/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_USB_EHCI_SYSBUS) += hcd-ehci-sysbus.o common-obj-$(CONFIG_USB_XHCI) += hcd-xhci.o common-obj-$(CONFIG_USB_XHCI_NEC) += hcd-xhci-nec.o common-obj-$(CONFIG_USB_MUSB) += hcd-musb.o +common-obj-$(CONFIG_USB_DWC2) += hcd-dwc2.o common-obj-$(CONFIG_TUSB6010) += tusb6010.o common-obj-$(CONFIG_IMX) += chipidea.o diff --git a/hw/usb/trace-events b/hw/usb/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/trace-events +++ b/hw/usb/trace-events @@ -XXX,XX +XXX,XX @@ usb_xhci_xfer_error(void *xfer, uint32_t ret) "%p: ret %d" usb_xhci_unimplemented(const char *item, int nr) "%s (0x%x)" usb_xhci_enforced_limit(const char *item) "%s" +# hcd-dwc2.c +usb_dwc2_update_irq(uint32_t level) "level=%d" +usb_dwc2_raise_global_irq(uint32_t intr) "0x%08x" +usb_dwc2_lower_global_irq(uint32_t intr) "0x%08x" +usb_dwc2_raise_host_irq(uint32_t intr) "0x%04x" +usb_dwc2_lower_host_irq(uint32_t intr) "0x%04x" +usb_dwc2_sof(int64_t next) "next SOF %" PRId64 +usb_dwc2_bus_start(void) "start SOFs" +usb_dwc2_bus_stop(void) "stop SOFs" +usb_dwc2_find_device(uint8_t addr) "%d" +usb_dwc2_port_disabled(uint32_t pnum) "port %d disabled" +usb_dwc2_device_found(uint32_t pnum) "device found on port %d" +usb_dwc2_device_not_found(void) "device not found" +usb_dwc2_handle_packet(uint32_t chan, void *dev, void *pkt, uint32_t ep, const char *type, const char *dir, uint32_t mps, uint32_t len, uint32_t pcnt) "ch %d dev %p pkt %p ep %d type %s dir %s mps %d len %d pcnt %d" +usb_dwc2_memory_read(uint32_t addr, uint32_t len) "addr %d len %d" +usb_dwc2_packet_status(const char *status, uint32_t len) "status %s len %d" +usb_dwc2_packet_error(const char *status) "ERROR %s" +usb_dwc2_async_packet(void *pkt, uint32_t chan, void *dev, uint32_t ep, const char *dir, uint32_t len) "pkt %p ch %d dev %p ep %d %s len %d" +usb_dwc2_memory_write(uint32_t addr, uint32_t len) "addr %d len %d" +usb_dwc2_packet_done(const char *status, uint32_t actual, uint32_t len, uint32_t pcnt) "status %s actual %d len %d pcnt %d" +usb_dwc2_packet_next(const char *status, uint32_t len, uint32_t pcnt) "status %s len %d pcnt %d" +usb_dwc2_attach(void *port) "port %p" +usb_dwc2_attach_speed(const char *speed) "%s-speed device attached" +usb_dwc2_detach(void *port) "port %p" +usb_dwc2_child_detach(void *port, void *child) "port %p child %p" +usb_dwc2_wakeup(void *port) "port %p" +usb_dwc2_async_packet_complete(void *port, void *pkt, uint32_t chan, void *dev, uint32_t ep, const char *dir, uint32_t len) "port %p packet %p ch %d dev %p ep %d %s len %d" +usb_dwc2_work_bh(void) "" +usb_dwc2_work_bh_service(uint32_t first, uint32_t current, void *dev, uint32_t ep) "first %d servicing %d dev %p ep %d" +usb_dwc2_work_bh_next(uint32_t chan) "next %d" +usb_dwc2_enable_chan(uint32_t chan, void *dev, void *pkt, uint32_t ep) "ch %d dev %p pkt %p ep %d" +usb_dwc2_glbreg_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_glbreg_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_fszreg_read(uint64_t addr, uint32_t val) " 0x%04" PRIx64 " HPTXFSIZ val 0x%08x" +usb_dwc2_fszreg_write(uint64_t addr, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " HPTXFSIZ val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg0_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_hreg0_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg1_read(uint64_t addr, const char *reg, uint64_t chan, uint32_t val) " 0x%04" PRIx64 " %s%" PRId64 " val 0x%08x" +usb_dwc2_hreg1_write(uint64_t addr, const char *reg, uint64_t chan, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " %s%" PRId64 " val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_pcgreg_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_pcgreg_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg2_read(uint64_t addr, uint64_t fifo, uint32_t val) " 0x%04" PRIx64 " FIFO%" PRId64 " val 0x%08x" +usb_dwc2_hreg2_write(uint64_t addr, uint64_t fifo, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " FIFO%" PRId64 " val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg0_action(const char *s) "%s" +usb_dwc2_wakeup_endpoint(void *ep, uint32_t stream) "endp %p stream %d" +usb_dwc2_work_timer(void) "" +usb_dwc2_reset_enter(void) "=== RESET enter ===" +usb_dwc2_reset_hold(void) "=== RESET hold ===" +usb_dwc2_reset_exit(void) "=== RESET exit ===" + # desc.c usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d" usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d" -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> The dwc-hsotg (dwc2) USB host depends on a short packet to indicate the end of an IN transfer. The usb-storage driver currently doesn't provide this, so fix it. I have tested this change rather extensively using a PC emulation with xhci, ehci, and uhci controllers, and have not observed any regressions. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-6-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/dev-storage.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/usb/dev-storage.c b/hw/usb/dev-storage.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-storage.c +++ b/hw/usb/dev-storage.c @@ -XXX,XX +XXX,XX @@ static void usb_msd_copy_data(MSDState *s, USBPacket *p) usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len); s->scsi_len -= len; s->scsi_off += len; + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->scsi_len == 0 || s->data_len == 0) { scsi_req_continue(s->req); @@ -XXX,XX +XXX,XX @@ static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t r if (s->data_len) { int len = (p->iov.size - p->actual_length); usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; } if (s->data_len == 0) { @@ -XXX,XX +XXX,XX @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) int len = p->iov.size - p->actual_length; if (len) { usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->data_len == 0) { s->mode = USB_MSDM_CSW; @@ -XXX,XX +XXX,XX @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) int len = p->iov.size - p->actual_length; if (len) { usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->data_len == 0) { s->mode = USB_MSDM_CSW; } } } - if (p->actual_length < p->iov.size) { + if (p->actual_length < p->iov.size && (p->short_not_ok || + s->scsi_len >= p->ep->max_packet_size)) { DPRINTF("Deferring packet %p [wait data-in]\n", p); s->packet = p; p->status = USB_RET_ASYNC; -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Wire the dwc-hsotg (dwc2) emulation into Qemu Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-7-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 3 ++- hw/arm/bcm2835_peripherals.c | 21 ++++++++++++++++++++- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/bcm2835_sdhost.h" #include "hw/gpio/bcm2835_gpio.h" #include "hw/timer/bcm2835_systmr.h" +#include "hw/usb/hcd-dwc2.h" #include "hw/misc/unimp.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { UnimplementedDeviceState ave0; UnimplementedDeviceState bscsl; UnimplementedDeviceState smi; - UnimplementedDeviceState dwc2; + DWC2State dwc2; UnimplementedDeviceState sdramc; } BCM2835PeripheralState; diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) /* Mphi */ sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi), TYPE_BCM2835_MPHI); + + /* DWC2 */ + sysbus_init_child_obj(obj, "dwc2", &s->dwc2, sizeof(s->dwc2), + TYPE_DWC2_USB); + + object_property_add_const_link(OBJECT(&s->dwc2), "dma-mr", + OBJECT(&s->gpu_bus_mr)); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, INTERRUPT_HOSTPORT)); + /* DWC2 */ + object_property_set_bool(OBJECT(&s->dwc2), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, USB_OTG_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dwc2), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->dwc2), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_USB)); + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->otp, "bcm2835-otp", OTP_OFFSET, 0x80); create_unimp(s, &s->dbus, "bcm2835-dbus", DBUS_OFFSET, 0x8000); create_unimp(s, &s->ave0, "bcm2835-ave0", AVE0_OFFSET, 0x8000); - create_unimp(s, &s->dwc2, "dwc-usb2", USB_OTG_OFFSET, 0x1000); create_unimp(s, &s->sdramc, "bcm2835-sdramc", SDRAMC_OFFSET, 0x100); } -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add a check for functional dwc-hsotg (dwc2) USB host emulation to the Raspi 2 acceptance test Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-8-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(LinuxKernelTest): self.vm.set_console() kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + - serial_kernel_cmdline[uart_id]) + serial_kernel_cmdline[uart_id] + + ' root=/dev/mmcblk0p2 rootwait ' + + 'dwc_otg.fiq_fsm_enable=0') self.vm.add_args('-kernel', kernel_path, '-dtb', dtb_path, - '-append', kernel_command_line) + '-append', kernel_command_line, + '-device', 'usb-kbd') self.vm.launch() console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + console_pattern = 'Product: QEMU USB Keyboard' + self.wait_for_console_pattern(console_pattern) def test_arm_raspi2_uart0(self): """ -- 2.20.1 Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-2-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 25 ++++++++++++++++++++++ target/arm/translate-neon.inc.c | 38 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 18 +++++++--------- 3 files changed, 71 insertions(+), 10 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VRECPS_fp_3s 1111 001 0 0 . 0 . .... .... 1111 ... 1 .... @3same_fp VRSQRTS_fp_3s 1111 001 0 0 . 1 . .... .... 1111 ... 1 .... @3same_fp VMAXNM_fp_3s 1111 001 1 0 . 0 . .... .... 1111 ... 1 .... @3same_fp VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp + +###################################################################### +# 2-reg-and-shift grouping: +# 1111 001 U 1 D immH:3 immL:3 Vd:4 opc:4 L Q M 1 Vm:4 +###################################################################### +&2reg_shift vm vd q shift size + +@2reg_shl_d .... ... . . . shift:6 .... .... 1 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 +@2reg_shl_s .... ... . . . 1 shift:5 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 +@2reg_shl_h .... ... . . . 01 shift:4 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 +@2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 + +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b + +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_3same_fp_pair(DisasContext *s, arg_3same *a, VFPGen3OpSPFn *fn) DO_3S_FP_PAIR(VPADD, gen_helper_vfp_adds) DO_3S_FP_PAIR(VPMAX, gen_helper_vfp_maxs) DO_3S_FP_PAIR(VPMIN, gen_helper_vfp_mins) + +static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) +{ + /* Handle a 2-reg-shift insn which can be vectorized. */ + int vec_size = a->q ? 16 : 8; + int rd_ofs = neon_reg_offset(a->vd, 0); + int rm_ofs = neon_reg_offset(a->vm, 0); + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fn(a->size, rd_ofs, rm_ofs, a->shift, vec_size, vec_size); + return true; +} + +#define DO_2SH(INSN, FUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_vector_2sh(s, a, FUNC); \ + } \ + +DO_2SH(VSHL, tcg_gen_gvec_shli) +DO_2SH(VSLI, gen_gvec_sli) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if ((insn & 0x00380080) != 0) { /* Two registers and shift. */ op = (insn >> 8) & 0xf; + + switch (op) { + case 5: /* VSHL, VSLI */ + return 1; /* handled by decodetree */ + default: + break; + } + if (insn & (1 << 7)) { /* 64-bit shift. */ if (op > 7) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) gen_gvec_sri(size, rd_ofs, rm_ofs, shift, vec_size, vec_size); return 0; - - case 5: /* VSHL, VSLI */ - if (u) { /* VSLI */ - gen_gvec_sli(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { /* VSHL */ - tcg_gen_gvec_shli(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; } if (size == 3) { -- 2.20.1 Convert the VSHR 2-reg-shift insns to decodetree. Note that unlike the legacy decoder, we present the right shift amount to the trans_ function as a positive integer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-3-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 25 ++++++++++++++++++++ target/arm/translate-neon.inc.c | 41 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 21 +---------------- 3 files changed, 67 insertions(+), 20 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp ###################################################################### &2reg_shift vm vd q shift size +# Right shifts are encoded as N - shift, where N is the element size in bits. +%neon_rshift_i6 16:6 !function=rsub_64 +%neon_rshift_i5 16:5 !function=rsub_32 +%neon_rshift_i4 16:4 !function=rsub_16 +%neon_rshift_i3 16:3 !function=rsub_8 + +@2reg_shr_d .... ... . . . ...... .... .... 1 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 shift=%neon_rshift_i6 +@2reg_shr_s .... ... . . . 1 ..... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 shift=%neon_rshift_i5 +@2reg_shr_h .... ... . . . 01 .... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 shift=%neon_rshift_i4 +@2reg_shr_b .... ... . . . 001 ... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i3 + @2reg_shl_d .... ... . . . shift:6 .... .... 1 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=3 @2reg_shl_s .... ... . . . 1 shift:5 .... .... 0 q:1 . . .... \ @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b + +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b + VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static inline int plus1(DisasContext *s, int x) return x + 1; } +static inline int rsub_64(DisasContext *s, int x) +{ + return 64 - x; +} + +static inline int rsub_32(DisasContext *s, int x) +{ + return 32 - x; +} +static inline int rsub_16(DisasContext *s, int x) +{ + return 16 - x; +} +static inline int rsub_8(DisasContext *s, int x) +{ + return 8 - x; +} + /* Include the generated Neon decoder */ #include "decode-neon-dp.inc.c" #include "decode-neon-ls.inc.c" @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) DO_2SH(VSHL, tcg_gen_gvec_shli) DO_2SH(VSLI, gen_gvec_sli) + +static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a) +{ + /* Signed shift out of range results in all-sign-bits */ + a->shift = MIN(a->shift, (8 << a->size) - 1); + return do_vector_2sh(s, a, tcg_gen_gvec_sari); +} + +static void gen_zero_rd_2sh(unsigned vece, uint32_t rd_ofs, uint32_t rm_ofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(vece, rd_ofs, oprsz, maxsz, 0); +} + +static bool trans_VSHR_U_2sh(DisasContext *s, arg_2reg_shift *a) +{ + /* Shift out of range is architecturally valid and results in zero. */ + if (a->shift >= (8 << a->size)) { + return do_vector_2sh(s, a, gen_zero_rd_2sh); + } else { + return do_vector_2sh(s, a, tcg_gen_gvec_shri); + } +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) op = (insn >> 8) & 0xf; switch (op) { + case 0: /* VSHR */ case 5: /* VSHL, VSLI */ return 1; /* handled by decodetree */ default: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } switch (op) { - case 0: /* VSHR */ - /* Right shift comes here negative. */ - shift = -shift; - /* Shifts larger than the element size are architecturally - * valid. Unsigned results in all zeros; signed results - * in all sign bits. - */ - if (!u) { - tcg_gen_gvec_sari(size, rd_ofs, rm_ofs, - MIN(shift, (8 << size) - 1), - vec_size, vec_size); - } else if (shift >= 8 << size) { - tcg_gen_gvec_dup_imm(MO_8, rd_ofs, vec_size, - vec_size, 0); - } else { - tcg_gen_gvec_shri(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - case 1: /* VSRA */ /* Right shift comes here negative. */ shift = -shift; -- 2.20.1 Convert the VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree. (These are the last instructions in the group that are vectorized; the rest all require looping over each element.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-4-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 35 ++++++++++++++++++++++ target/arm/translate-neon.inc.c | 7 +++++ target/arm/translate.c | 52 +++------------------------------ 3 files changed, 46 insertions(+), 48 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_d +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_s +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_h +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_b + +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_d +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_s +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_h +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_b + +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_d +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_s +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_h +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_b + +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_d +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_s +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_h +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_b + +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_d +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_s +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_h +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_b + +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_d +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_s +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_h +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_b + +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_d +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_s +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_h +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_b + VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) DO_2SH(VSHL, tcg_gen_gvec_shli) DO_2SH(VSLI, gen_gvec_sli) +DO_2SH(VSRI, gen_gvec_sri) +DO_2SH(VSRA_S, gen_gvec_ssra) +DO_2SH(VSRA_U, gen_gvec_usra) +DO_2SH(VRSHR_S, gen_gvec_srshr) +DO_2SH(VRSHR_U, gen_gvec_urshr) +DO_2SH(VRSRA_S, gen_gvec_srsra) +DO_2SH(VRSRA_U, gen_gvec_ursra) static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) switch (op) { case 0: /* VSHR */ + case 1: /* VSRA */ + case 2: /* VRSHR */ + case 3: /* VRSRA */ + case 4: /* VSRI */ case 5: /* VSHL, VSLI */ return 1; /* handled by decodetree */ default: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) shift = shift - (1 << (size + 3)); } - switch (op) { - case 1: /* VSRA */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_usra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_ssra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 2: /* VRSHR */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_urshr(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_srshr(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 3: /* VRSRA */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_ursra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_srsra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 4: /* VSRI */ - if (!u) { - return 1; - } - /* Right shift comes here negative. */ - shift = -shift; - gen_gvec_sri(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - return 0; - } - if (size == 3) { count = q + 1; } else { -- 2.20.1 Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree. These are the last of the simple shift-by-immediate insns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-5-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 15 +++++ target/arm/translate-neon.inc.c | 108 +++++++++++++++++++++++++++++++ target/arm/translate.c | 110 +------------------------------- 3 files changed, 126 insertions(+), 107 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b + +VQSHLU_64_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_d +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_s +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_h +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_b + +VQSHL_S_64_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b + +VQSHL_U_64_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHR_U_2sh(DisasContext *s, arg_2reg_shift *a) return do_vector_2sh(s, a, tcg_gen_gvec_shri); } } + +static bool do_2shift_env_64(DisasContext *s, arg_2reg_shift *a, + NeonGenTwo64OpEnvFn *fn) +{ + /* + * 2-reg-and-shift operations, size == 3 case, where the + * function needs to be passed cpu_env. + */ + TCGv_i64 constimm; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * To avoid excessive duplication of ops we implement shift + * by immediate using the variable shift operations. + */ + constimm = tcg_const_i64(dup_const(a->size, a->shift)); + + for (pass = 0; pass < a->q + 1; pass++) { + TCGv_i64 tmp = tcg_temp_new_i64(); + + neon_load_reg64(tmp, a->vm + pass); + fn(tmp, cpu_env, tmp, constimm); + neon_store_reg64(tmp, a->vd + pass); + } + tcg_temp_free_i64(constimm); + return true; +} + +static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoOpEnvFn *fn) +{ + /* + * 2-reg-and-shift operations, size < 3 case, where the + * helper needs to be passed cpu_env. + */ + TCGv_i32 constimm; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * To avoid excessive duplication of ops we implement shift + * by immediate using the variable shift operations. + */ + constimm = tcg_const_i32(dup_const(a->size, a->shift)); + + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + fn(tmp, cpu_env, tmp, constimm); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_i32(constimm); + return true; +} + +#define DO_2SHIFT_ENV(INSN, FUNC) \ + static bool trans_##INSN##_64_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_env_64(s, a, gen_helper_neon_##FUNC##64); \ + } \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + static NeonGenTwoOpEnvFn * const fns[] = { \ + gen_helper_neon_##FUNC##8, \ + gen_helper_neon_##FUNC##16, \ + gen_helper_neon_##FUNC##32, \ + }; \ + assert(a->size < ARRAY_SIZE(fns)); \ + return do_2shift_env_32(s, a, fns[a->size]); \ + } + +DO_2SHIFT_ENV(VQSHLU, qshlu_s) +DO_2SHIFT_ENV(VQSHL_U, qshl_u) +DO_2SHIFT_ENV(VQSHL_S, qshl_s) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_rsb(int size, TCGv_i32 t0, TCGv_i32 t1) } } -#define GEN_NEON_INTEGER_OP_ENV(name) do { \ - switch ((size << 1) | u) { \ - case 0: \ - gen_helper_neon_##name##_s8(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 1: \ - gen_helper_neon_##name##_u8(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 2: \ - gen_helper_neon_##name##_s16(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 3: \ - gen_helper_neon_##name##_u16(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 4: \ - gen_helper_neon_##name##_s32(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 5: \ - gen_helper_neon_##name##_u32(tmp, cpu_env, tmp, tmp2); \ - break; \ - default: return 1; \ - }} while (0) - static TCGv_i32 neon_load_scratch(int scratch) { TCGv_i32 tmp = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int size; int shift; int pass; - int count; int u; int vec_size; uint32_t imm; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 3: /* VRSRA */ case 4: /* VSRI */ case 5: /* VSHL, VSLI */ + case 6: /* VQSHLU */ + case 7: /* VQSHL */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op < 8) { - /* Shift by immediate: - VSHR, VSRA, VRSHR, VRSRA, VSRI, VSHL, VQSHL, VQSHLU. */ - if (q && ((rd | rm) & 1)) { - return 1; - } - if (!u && (op == 4 || op == 6)) { - return 1; - } - /* Right shifts are encoded as N - shift, where N is the - element size in bits. */ - if (op <= 4) { - shift = shift - (1 << (size + 3)); - } - - if (size == 3) { - count = q + 1; - } else { - count = q ? 4: 2; - } - - /* To avoid excessive duplication of ops we implement shift - * by immediate using the variable shift operations. - */ - imm = dup_const(size, shift); - - for (pass = 0; pass < count; pass++) { - if (size == 3) { - neon_load_reg64(cpu_V0, rm + pass); - tcg_gen_movi_i64(cpu_V1, imm); - switch (op) { - case 6: /* VQSHLU */ - gen_helper_neon_qshlu_s64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - break; - case 7: /* VQSHL */ - if (u) { - gen_helper_neon_qshl_u64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - } else { - gen_helper_neon_qshl_s64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - } - break; - default: - g_assert_not_reached(); - } - neon_store_reg64(cpu_V0, rd + pass); - } else { /* size < 3 */ - /* Operands in T0 and T1. */ - tmp = neon_load_reg(rm, pass); - tmp2 = tcg_temp_new_i32(); - tcg_gen_movi_i32(tmp2, imm); - switch (op) { - case 6: /* VQSHLU */ - switch (size) { - case 0: - gen_helper_neon_qshlu_s8(tmp, cpu_env, - tmp, tmp2); - break; - case 1: - gen_helper_neon_qshlu_s16(tmp, cpu_env, - tmp, tmp2); - break; - case 2: - gen_helper_neon_qshlu_s32(tmp, cpu_env, - tmp, tmp2); - break; - default: - abort(); - } - break; - case 7: /* VQSHL */ - GEN_NEON_INTEGER_OP_ENV(qshl); - break; - default: - g_assert_not_reached(); - } - tcg_temp_free_i32(tmp2); - neon_store_reg(rd, pass, tmp); - } - } /* for pass */ - } else if (op < 10) { + if (op < 10) { /* Shift by immediate and narrow: VSHRN, VRSHRN, VQSHRN, VQRSHRN. */ int input_unsigned = (op == 8) ? !u : u; -- 2.20.1 Convert the Neon narrowing shifts where op==8 to decodetree: * VSHRN * VRSHRN * VQSHRUN * VQRSHRUN Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-6-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 27 ++++++ target/arm/translate-neon.inc.c | 167 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 1 + 3 files changed, 195 insertions(+) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 +# Narrowing right shifts: here the Q bit is part of the opcode decode +@2reg_shrn_d .... ... . . . 1 ..... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 q=0 \ + shift=%neon_rshift_i5 +@2reg_shrn_s .... ... . . . 01 .... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 q=0 \ + shift=%neon_rshift_i4 +@2reg_shrn_h .... ... . . . 001 ... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 \ + shift=%neon_rshift_i3 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VQSHL_U_64_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b + +VSHRN_64_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_d +VSHRN_32_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_s +VSHRN_16_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h + +VRSHRN_64_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d +VRSHRN_32_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s +VRSHRN_16_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h + +VQSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_d +VQSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_s +VQSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h + +VQRSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d +VQRSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s +VQRSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, DO_2SHIFT_ENV(VQSHLU, qshlu_s) DO_2SHIFT_ENV(VQSHL_U, qshl_u) DO_2SHIFT_ENV(VQSHL_S, qshl_s) + +static bool do_2shift_narrow_64(DisasContext *s, arg_2reg_shift *a, + NeonGenTwo64OpFn *shiftfn, + NeonGenNarrowEnvFn *narrowfn) +{ + /* 2-reg-and-shift narrowing-shift operations, size == 3 case */ + TCGv_i64 constimm, rm1, rm2; + TCGv_i32 rd; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is always a right shift, and the shiftfn is always a + * left-shift helper, which thus needs the negated shift count. + */ + constimm = tcg_const_i64(-a->shift); + rm1 = tcg_temp_new_i64(); + rm2 = tcg_temp_new_i64(); + + /* Load both inputs first to avoid potential overwrite if rm == rd */ + neon_load_reg64(rm1, a->vm); + neon_load_reg64(rm2, a->vm + 1); + + shiftfn(rm1, rm1, constimm); + rd = tcg_temp_new_i32(); + narrowfn(rd, cpu_env, rm1); + neon_store_reg(a->vd, 0, rd); + + shiftfn(rm2, rm2, constimm); + rd = tcg_temp_new_i32(); + narrowfn(rd, cpu_env, rm2); + neon_store_reg(a->vd, 1, rd); + + tcg_temp_free_i64(rm1); + tcg_temp_free_i64(rm2); + tcg_temp_free_i64(constimm); + + return true; +} + +static bool do_2shift_narrow_32(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoOpFn *shiftfn, + NeonGenNarrowEnvFn *narrowfn) +{ + /* 2-reg-and-shift narrowing-shift operations, size < 3 case */ + TCGv_i32 constimm, rm1, rm2, rm3, rm4; + TCGv_i64 rtmp; + uint32_t imm; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is always a right shift, and the shiftfn is always a + * left-shift helper, which thus needs the negated shift count + * duplicated into each lane of the immediate value. + */ + if (a->size == 1) { + imm = (uint16_t)(-a->shift); + imm |= imm << 16; + } else { + /* size == 2 */ + imm = -a->shift; + } + constimm = tcg_const_i32(imm); + + /* Load all inputs first to avoid potential overwrite */ + rm1 = neon_load_reg(a->vm, 0); + rm2 = neon_load_reg(a->vm, 1); + rm3 = neon_load_reg(a->vm + 1, 0); + rm4 = neon_load_reg(a->vm + 1, 1); + rtmp = tcg_temp_new_i64(); + + shiftfn(rm1, rm1, constimm); + shiftfn(rm2, rm2, constimm); + + tcg_gen_concat_i32_i64(rtmp, rm1, rm2); + tcg_temp_free_i32(rm2); + + narrowfn(rm1, cpu_env, rtmp); + neon_store_reg(a->vd, 0, rm1); + + shiftfn(rm3, rm3, constimm); + shiftfn(rm4, rm4, constimm); + tcg_temp_free_i32(constimm); + + tcg_gen_concat_i32_i64(rtmp, rm3, rm4); + tcg_temp_free_i32(rm4); + + narrowfn(rm3, cpu_env, rtmp); + tcg_temp_free_i64(rtmp); + neon_store_reg(a->vd, 1, rm3); + return true; +} + +#define DO_2SN_64(INSN, FUNC, NARROWFUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_narrow_64(s, a, FUNC, NARROWFUNC); \ + } +#define DO_2SN_32(INSN, FUNC, NARROWFUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_narrow_32(s, a, FUNC, NARROWFUNC); \ + } + +static void gen_neon_narrow_u32(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + tcg_gen_extrl_i64_i32(dest, src); +} + +static void gen_neon_narrow_u16(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + gen_helper_neon_narrow_u16(dest, src); +} + +static void gen_neon_narrow_u8(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + gen_helper_neon_narrow_u8(dest, src); +} + +DO_2SN_64(VSHRN_64, gen_ushl_i64, gen_neon_narrow_u32) +DO_2SN_32(VSHRN_32, gen_ushl_i32, gen_neon_narrow_u16) +DO_2SN_32(VSHRN_16, gen_helper_neon_shl_u16, gen_neon_narrow_u8) + +DO_2SN_64(VRSHRN_64, gen_helper_neon_rshl_u64, gen_neon_narrow_u32) +DO_2SN_32(VRSHRN_32, gen_helper_neon_rshl_u32, gen_neon_narrow_u16) +DO_2SN_32(VRSHRN_16, gen_helper_neon_rshl_u16, gen_neon_narrow_u8) + +DO_2SN_64(VQSHRUN_64, gen_sshl_i64, gen_helper_neon_unarrow_sat32) +DO_2SN_32(VQSHRUN_32, gen_sshl_i32, gen_helper_neon_unarrow_sat16) +DO_2SN_32(VQSHRUN_16, gen_helper_neon_shl_s16, gen_helper_neon_unarrow_sat8) + +DO_2SN_64(VQRSHRUN_64, gen_helper_neon_rshl_s64, gen_helper_neon_unarrow_sat32) +DO_2SN_32(VQRSHRUN_32, gen_helper_neon_rshl_s32, gen_helper_neon_unarrow_sat16) +DO_2SN_32(VQRSHRUN_16, gen_helper_neon_rshl_s16, gen_helper_neon_unarrow_sat8) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 5: /* VSHL, VSLI */ case 6: /* VQSHLU */ case 7: /* VQSHL */ + case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ return 1; /* handled by decodetree */ default: break; -- 2.20.1 Convert the remaining Neon narrowing shifts to decodetree: * VQSHRN * VQRSHRN Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-7-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 20 ++++++ target/arm/translate-neon.inc.c | 15 +++++ target/arm/translate.c | 110 +------------------------------- 3 files changed, 37 insertions(+), 108 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VQSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h VQRSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d VQRSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s VQRSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h + +# VQSHRN with signed input +VQSHRN_S64_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_d +VQSHRN_S32_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_s +VQSHRN_S16_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h + +# VQRSHRN with signed input +VQRSHRN_S64_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d +VQRSHRN_S32_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s +VQRSHRN_S16_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h + +# VQSHRN with unsigned input +VQSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_d +VQSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_s +VQSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h + +# VQRSHRN with unsigned input +VQRSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d +VQRSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s +VQRSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2SN_32(VQSHRUN_16, gen_helper_neon_shl_s16, gen_helper_neon_unarrow_sat8) DO_2SN_64(VQRSHRUN_64, gen_helper_neon_rshl_s64, gen_helper_neon_unarrow_sat32) DO_2SN_32(VQRSHRUN_32, gen_helper_neon_rshl_s32, gen_helper_neon_unarrow_sat16) DO_2SN_32(VQRSHRUN_16, gen_helper_neon_rshl_s16, gen_helper_neon_unarrow_sat8) +DO_2SN_64(VQSHRN_S64, gen_sshl_i64, gen_helper_neon_narrow_sat_s32) +DO_2SN_32(VQSHRN_S32, gen_sshl_i32, gen_helper_neon_narrow_sat_s16) +DO_2SN_32(VQSHRN_S16, gen_helper_neon_shl_s16, gen_helper_neon_narrow_sat_s8) + +DO_2SN_64(VQRSHRN_S64, gen_helper_neon_rshl_s64, gen_helper_neon_narrow_sat_s32) +DO_2SN_32(VQRSHRN_S32, gen_helper_neon_rshl_s32, gen_helper_neon_narrow_sat_s16) +DO_2SN_32(VQRSHRN_S16, gen_helper_neon_rshl_s16, gen_helper_neon_narrow_sat_s8) + +DO_2SN_64(VQSHRN_U64, gen_ushl_i64, gen_helper_neon_narrow_sat_u32) +DO_2SN_32(VQSHRN_U32, gen_ushl_i32, gen_helper_neon_narrow_sat_u16) +DO_2SN_32(VQSHRN_U16, gen_helper_neon_shl_u16, gen_helper_neon_narrow_sat_u8) + +DO_2SN_64(VQRSHRN_U64, gen_helper_neon_rshl_u64, gen_helper_neon_narrow_sat_u32) +DO_2SN_32(VQRSHRN_U32, gen_helper_neon_rshl_u32, gen_helper_neon_narrow_sat_u16) +DO_2SN_32(VQRSHRN_U16, gen_helper_neon_rshl_u16, gen_helper_neon_narrow_sat_u8) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_unarrow_sats(int size, TCGv_i32 dest, TCGv_i64 src) } } -static inline void gen_neon_shift_narrow(int size, TCGv_i32 var, TCGv_i32 shift, - int q, int u) -{ - if (q) { - if (u) { - switch (size) { - case 1: gen_helper_neon_rshl_u16(var, var, shift); break; - case 2: gen_helper_neon_rshl_u32(var, var, shift); break; - default: abort(); - } - } else { - switch (size) { - case 1: gen_helper_neon_rshl_s16(var, var, shift); break; - case 2: gen_helper_neon_rshl_s32(var, var, shift); break; - default: abort(); - } - } - } else { - if (u) { - switch (size) { - case 1: gen_helper_neon_shl_u16(var, var, shift); break; - case 2: gen_ushl_i32(var, var, shift); break; - default: abort(); - } - } else { - switch (size) { - case 1: gen_helper_neon_shl_s16(var, var, shift); break; - case 2: gen_sshl_i32(var, var, shift); break; - default: abort(); - } - } - } -} - static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) { if (u) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 6: /* VQSHLU */ case 7: /* VQSHL */ case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ + case 9: /* VQSHRN, VQRSHRN */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op < 10) { - /* Shift by immediate and narrow: - VSHRN, VRSHRN, VQSHRN, VQRSHRN. */ - int input_unsigned = (op == 8) ? !u : u; - if (rm & 1) { - return 1; - } - shift = shift - (1 << (size + 3)); - size++; - if (size == 3) { - tmp64 = tcg_const_i64(shift); - neon_load_reg64(cpu_V0, rm); - neon_load_reg64(cpu_V1, rm + 1); - for (pass = 0; pass < 2; pass++) { - TCGv_i64 in; - if (pass == 0) { - in = cpu_V0; - } else { - in = cpu_V1; - } - if (q) { - if (input_unsigned) { - gen_helper_neon_rshl_u64(cpu_V0, in, tmp64); - } else { - gen_helper_neon_rshl_s64(cpu_V0, in, tmp64); - } - } else { - if (input_unsigned) { - gen_ushl_i64(cpu_V0, in, tmp64); - } else { - gen_sshl_i64(cpu_V0, in, tmp64); - } - } - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == 8, u, size - 1, tmp, cpu_V0); - neon_store_reg(rd, pass, tmp); - } /* for pass */ - tcg_temp_free_i64(tmp64); - } else { - if (size == 1) { - imm = (uint16_t)shift; - imm |= imm << 16; - } else { - /* size == 2 */ - imm = (uint32_t)shift; - } - tmp2 = tcg_const_i32(imm); - tmp4 = neon_load_reg(rm + 1, 0); - tmp5 = neon_load_reg(rm + 1, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 0) { - tmp = neon_load_reg(rm, 0); - } else { - tmp = tmp4; - } - gen_neon_shift_narrow(size, tmp, tmp2, q, - input_unsigned); - if (pass == 0) { - tmp3 = neon_load_reg(rm, 1); - } else { - tmp3 = tmp5; - } - gen_neon_shift_narrow(size, tmp3, tmp2, q, - input_unsigned); - tcg_gen_concat_i32_i64(cpu_V0, tmp, tmp3); - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(tmp3); - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == 8, u, size - 1, tmp, cpu_V0); - neon_store_reg(rd, pass, tmp); - } /* for pass */ - tcg_temp_free_i32(tmp2); - } - } else if (op == 10) { + if (op == 10) { /* VSHLL, VMOVL */ if (q || (rd & 1)) { return 1; -- 2.20.1 Convert the VSHLL and VMOVL insns from the 2-reg-shift group to decodetree. Since the loop always has two passes, we unroll it to avoid the awkward reassignment of one TCGv to another. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-8-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 16 +++++++ target/arm/translate-neon.inc.c | 81 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 46 +------------------ 3 files changed, 99 insertions(+), 44 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 \ shift=%neon_rshift_i3 +# Long left shifts: again Q is part of opcode decode +@2reg_shll_s .... ... . . . 1 shift:5 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 q=0 +@2reg_shll_h .... ... . . . 01 shift:4 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 +@2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VQSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h VQRSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d VQRSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s VQRSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h + +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b + +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2SN_32(VQSHRN_U16, gen_helper_neon_shl_u16, gen_helper_neon_narrow_sat_u8) DO_2SN_64(VQRSHRN_U64, gen_helper_neon_rshl_u64, gen_helper_neon_narrow_sat_u32) DO_2SN_32(VQRSHRN_U32, gen_helper_neon_rshl_u32, gen_helper_neon_narrow_sat_u16) DO_2SN_32(VQRSHRN_U16, gen_helper_neon_rshl_u16, gen_helper_neon_narrow_sat_u8) + +static bool do_vshll_2sh(DisasContext *s, arg_2reg_shift *a, + NeonGenWidenFn *widenfn, bool u) +{ + TCGv_i64 tmp; + TCGv_i32 rm0, rm1; + uint64_t widen_mask = 0; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vd & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is a widen-and-shift operation. The shift is always less + * than the width of the source type, so after widening the input + * vector we can simply shift the whole 64-bit widened register, + * and then clear the potential overflow bits resulting from left + * bits of the narrow input appearing as right bits of the left + * neighbour narrow input. Calculate a mask of bits to clear. + */ + if ((a->shift != 0) && (a->size < 2 || u)) { + int esize = 8 << a->size; + widen_mask = MAKE_64BIT_MASK(0, esize); + widen_mask >>= esize - a->shift; + widen_mask = dup_const(a->size + 1, widen_mask); + } + + rm0 = neon_load_reg(a->vm, 0); + rm1 = neon_load_reg(a->vm, 1); + tmp = tcg_temp_new_i64(); + + widenfn(tmp, rm0); + if (a->shift != 0) { + tcg_gen_shli_i64(tmp, tmp, a->shift); + tcg_gen_andi_i64(tmp, tmp, ~widen_mask); + } + neon_store_reg64(tmp, a->vd); + + widenfn(tmp, rm1); + if (a->shift != 0) { + tcg_gen_shli_i64(tmp, tmp, a->shift); + tcg_gen_andi_i64(tmp, tmp, ~widen_mask); + } + neon_store_reg64(tmp, a->vd + 1); + tcg_temp_free_i64(tmp); + return true; +} + +static bool trans_VSHLL_S_2sh(DisasContext *s, arg_2reg_shift *a) +{ + NeonGenWidenFn *widenfn[] = { + gen_helper_neon_widen_s8, + gen_helper_neon_widen_s16, + tcg_gen_ext_i32_i64, + }; + return do_vshll_2sh(s, a, widenfn[a->size], false); +} + +static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) +{ + NeonGenWidenFn *widenfn[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + }; + return do_vshll_2sh(s, a, widenfn[a->size], true); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 7: /* VQSHL */ case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ case 9: /* VQSHRN, VQRSHRN */ + case 10: /* VSHLL, including VMOVL */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op == 10) { - /* VSHLL, VMOVL */ - if (q || (rd & 1)) { - return 1; - } - tmp = neon_load_reg(rm, 0); - tmp2 = neon_load_reg(rm, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 1) - tmp = tmp2; - - gen_neon_widen(cpu_V0, tmp, size, u); - - if (shift != 0) { - /* The shift is less than the width of the source - type, so we can just shift the whole register. */ - tcg_gen_shli_i64(cpu_V0, cpu_V0, shift); - /* Widen the result of shift: we need to clear - * the potential overflow bits resulting from - * left bits of the narrow input appearing as - * right bits of left the neighbour narrow - * input. */ - if (size < 2 || !u) { - uint64_t imm64; - if (size == 0) { - imm = (0xffu >> (8 - shift)); - imm |= imm << 16; - } else if (size == 1) { - imm = 0xffff >> (16 - shift); - } else { - /* size == 2 */ - imm = 0xffffffff >> (32 - shift); - } - if (size < 2) { - imm64 = imm | (((uint64_t)imm) << 32); - } else { - imm64 = imm; - } - tcg_gen_andi_i64(cpu_V0, cpu_V0, ~imm64); - } - } - neon_store_reg64(cpu_V0, rd + pass); - } - } else if (op >= 14) { + if (op >= 14) { /* VCVT fixed-point. */ TCGv_ptr fpst; TCGv_i32 shiftv; -- 2.20.1 Convert the VCVT fixed-point conversion operations in the Neon 2-regs-and-shift group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-9-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 11 +++++ target/arm/translate-neon.inc.c | 49 +++++++++++++++++++++ target/arm/translate.c | 75 +-------------------------------- 3 files changed, 62 insertions(+), 73 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0 +# We use size=0 for fp32 and size=1 for fp16 to match the 3-same encodings. +@2reg_vcvt .... ... . . . 1 ..... .... .... . q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i5 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b + +# VCVT fixed<->float conversions +# TODO: FP16 fixed<->float conversions are opc==0b1100 and 0b1101 +VCVT_SF_2sh 1111 001 0 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt +VCVT_UF_2sh 1111 001 1 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt +VCVT_FS_2sh 1111 001 0 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt +VCVT_FU_2sh 1111 001 1 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) }; return do_vshll_2sh(s, a, widenfn[a->size], true); } + +static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoSingleOPFn *fn) +{ + /* FP operations in 2-reg-and-shift group */ + TCGv_i32 tmp, shiftv; + TCGv_ptr fpstatus; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpstatus = get_fpstatus_ptr(1); + shiftv = tcg_const_i32(a->shift); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + tmp = neon_load_reg(a->vm, pass); + fn(tmp, tmp, shiftv, fpstatus); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_ptr(fpstatus); + tcg_temp_free_i32(shiftv); + return true; +} + +#define DO_FP_2SH(INSN, FUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_fp_2sh(s, a, FUNC); \ + } + +DO_FP_2SH(VCVT_SF, gen_helper_vfp_sltos) +DO_FP_2SH(VCVT_UF, gen_helper_vfp_ultos) +DO_FP_2SH(VCVT_FS, gen_helper_vfp_tosls_round_to_zero) +DO_FP_2SH(VCVT_FU, gen_helper_vfp_touls_round_to_zero) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int q; int rd, rn, rm, rd_ofs, rn_ofs, rm_ofs; int size; - int shift; int pass; int u; int vec_size; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } else if (insn & (1 << 4)) { if ((insn & 0x00380080) != 0) { - /* Two registers and shift. */ - op = (insn >> 8) & 0xf; - - switch (op) { - case 0: /* VSHR */ - case 1: /* VSRA */ - case 2: /* VRSHR */ - case 3: /* VRSRA */ - case 4: /* VSRI */ - case 5: /* VSHL, VSLI */ - case 6: /* VQSHLU */ - case 7: /* VQSHL */ - case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ - case 9: /* VQSHRN, VQRSHRN */ - case 10: /* VSHLL, including VMOVL */ - return 1; /* handled by decodetree */ - default: - break; - } - - if (insn & (1 << 7)) { - /* 64-bit shift. */ - if (op > 7) { - return 1; - } - size = 3; - } else { - size = 2; - while ((insn & (1 << (size + 19))) == 0) - size--; - } - shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op >= 14) { - /* VCVT fixed-point. */ - TCGv_ptr fpst; - TCGv_i32 shiftv; - VFPGenFixPointFn *fn; - - if (!(insn & (1 << 21)) || (q && ((rd | rm) & 1))) { - return 1; - } - - if (!(op & 1)) { - if (u) { - fn = gen_helper_vfp_ultos; - } else { - fn = gen_helper_vfp_sltos; - } - } else { - if (u) { - fn = gen_helper_vfp_touls_round_to_zero; - } else { - fn = gen_helper_vfp_tosls_round_to_zero; - } - } - - /* We have already masked out the must-be-1 top bit of imm6, - * hence this 32-shift where the ARM ARM has 64-imm6. - */ - shift = 32 - shift; - fpst = get_fpstatus_ptr(1); - shiftv = tcg_const_i32(shift); - for (pass = 0; pass < (q ? 4 : 2); pass++) { - TCGv_i32 tmpf = neon_load_reg(rm, pass); - fn(tmpf, tmpf, shiftv, fpst); - neon_store_reg(rd, pass, tmpf); - } - tcg_temp_free_ptr(fpst); - tcg_temp_free_i32(shiftv); - } else { - return 1; - } + /* Two registers and shift: handled by decodetree */ + return 1; } else { /* (insn & 0x00380080) == 0 */ int invert, reg_ofs, vec_size; -- 2.20.1 Convert the insns in the one-register-and-immediate group to decodetree. In the new decode, our asimd_imm_const() function returns a 64-bit value rather than a 32-bit one, which means we don't need to treat cmode=14 op=1 as a special case in the decoder (it is the only encoding where the two halves of the 64-bit value are different). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-10-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 22 ++++++ target/arm/translate-neon.inc.c | 118 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 101 +-------------------------- 3 files changed, 142 insertions(+), 99 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VCVT_SF_2sh 1111 001 0 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt VCVT_UF_2sh 1111 001 1 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt VCVT_FS_2sh 1111 001 0 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt VCVT_FU_2sh 1111 001 1 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt + +###################################################################### +# 1-reg-and-modified-immediate grouping: +# 1111 001 i 1 D 000 imm:3 Vd:4 cmode:4 0 Q op 1 Vm:4 +###################################################################### + +&1reg_imm vd q imm cmode op + +%asimd_imm_value 24:1 16:3 0:4 + +@1reg_imm .... ... . . . ... ... .... .... . q:1 . . .... \ + &1reg_imm imm=%asimd_imm_value vd=%vd_dp + +# The cmode/op bits here decode VORR/VBIC/VMOV/VMNV, but +# not in a way we can conveniently represent in decodetree without +# a lot of repetition: +# VORR: op=0, (cmode & 1) && cmode < 12 +# VBIC: op=1, (cmode & 1) && cmode < 12 +# VMOV: everything else +# So we have a single decode line and check the cmode/op in the +# trans function. +Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_FP_2SH(VCVT_SF, gen_helper_vfp_sltos) DO_FP_2SH(VCVT_UF, gen_helper_vfp_ultos) DO_FP_2SH(VCVT_FS, gen_helper_vfp_tosls_round_to_zero) DO_FP_2SH(VCVT_FU, gen_helper_vfp_touls_round_to_zero) + +static uint64_t asimd_imm_const(uint32_t imm, int cmode, int op) +{ + /* + * Expand the encoded constant. + * Note that cmode = 2,3,4,5,6,7,10,11,12,13 imm=0 is UNPREDICTABLE. + * We choose to not special-case this and will behave as if a + * valid constant encoding of 0 had been given. + * cmode = 15 op = 1 must UNDEF; we assume decode has handled that. + */ + switch (cmode) { + case 0: case 1: + /* no-op */ + break; + case 2: case 3: + imm <<= 8; + break; + case 4: case 5: + imm <<= 16; + break; + case 6: case 7: + imm <<= 24; + break; + case 8: case 9: + imm |= imm << 16; + break; + case 10: case 11: + imm = (imm << 8) | (imm << 24); + break; + case 12: + imm = (imm << 8) | 0xff; + break; + case 13: + imm = (imm << 16) | 0xffff; + break; + case 14: + if (op) { + /* + * This is the only case where the top and bottom 32 bits + * of the encoded constant differ. + */ + uint64_t imm64 = 0; + int n; + + for (n = 0; n < 8; n++) { + if (imm & (1 << n)) { + imm64 |= (0xffULL << (n * 8)); + } + } + return imm64; + } + imm |= (imm << 8) | (imm << 16) | (imm << 24); + break; + case 15: + imm = ((imm & 0x80) << 24) | ((imm & 0x3f) << 19) + | ((imm & 0x40) ? (0x1f << 25) : (1 << 30)); + break; + } + if (op) { + imm = ~imm; + } + return dup_const(MO_32, imm); +} + +static bool do_1reg_imm(DisasContext *s, arg_1reg_imm *a, + GVecGen2iFn *fn) +{ + uint64_t imm; + int reg_ofs, vec_size; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { + return false; + } + + if (a->vd & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + reg_ofs = neon_reg_offset(a->vd, 0); + vec_size = a->q ? 16 : 8; + imm = asimd_imm_const(a->imm, a->cmode, a->op); + + fn(MO_64, reg_ofs, reg_ofs, imm, vec_size, vec_size); + return true; +} + +static void gen_VMOV_1r(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t c, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(MO_64, dofs, oprsz, maxsz, c); +} + +static bool trans_Vimm_1r(DisasContext *s, arg_1reg_imm *a) +{ + /* Handle decode of cmode/op here between VORR/VBIC/VMOV */ + GVecGen2iFn *fn; + + if ((a->cmode & 1) && a->cmode < 12) { + /* for op=1, the imm will be inverted, so BIC becomes AND. */ + fn = a->op ? tcg_gen_gvec_andi : tcg_gen_gvec_ori; + } else { + /* There is one unallocated cmode/op combination in this space */ + if (a->cmode == 15 && a->op == 1) { + return false; + } + fn = gen_VMOV_1r; + } + return do_1reg_imm(s, a, fn); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) /* Three register same length: handled by decodetree */ return 1; } else if (insn & (1 << 4)) { - if ((insn & 0x00380080) != 0) { - /* Two registers and shift: handled by decodetree */ - return 1; - } else { /* (insn & 0x00380080) == 0 */ - int invert, reg_ofs, vec_size; - - if (q && (rd & 1)) { - return 1; - } - - op = (insn >> 8) & 0xf; - /* One register and immediate. */ - imm = (u << 7) | ((insn >> 12) & 0x70) | (insn & 0xf); - invert = (insn & (1 << 5)) != 0; - /* Note that op = 2,3,4,5,6,7,10,11,12,13 imm=0 is UNPREDICTABLE. - * We choose to not special-case this and will behave as if a - * valid constant encoding of 0 had been given. - */ - switch (op) { - case 0: case 1: - /* no-op */ - break; - case 2: case 3: - imm <<= 8; - break; - case 4: case 5: - imm <<= 16; - break; - case 6: case 7: - imm <<= 24; - break; - case 8: case 9: - imm |= imm << 16; - break; - case 10: case 11: - imm = (imm << 8) | (imm << 24); - break; - case 12: - imm = (imm << 8) | 0xff; - break; - case 13: - imm = (imm << 16) | 0xffff; - break; - case 14: - imm |= (imm << 8) | (imm << 16) | (imm << 24); - if (invert) { - imm = ~imm; - } - break; - case 15: - if (invert) { - return 1; - } - imm = ((imm & 0x80) << 24) | ((imm & 0x3f) << 19) - | ((imm & 0x40) ? (0x1f << 25) : (1 << 30)); - break; - } - if (invert) { - imm = ~imm; - } - - reg_ofs = neon_reg_offset(rd, 0); - vec_size = q ? 16 : 8; - - if (op & 1 && op < 12) { - if (invert) { - /* The immediate value has already been inverted, - * so BIC becomes AND. - */ - tcg_gen_gvec_andi(MO_32, reg_ofs, reg_ofs, imm, - vec_size, vec_size); - } else { - tcg_gen_gvec_ori(MO_32, reg_ofs, reg_ofs, imm, - vec_size, vec_size); - } - } else { - /* VMOV, VMVN. */ - if (op == 14 && invert) { - TCGv_i64 t64 = tcg_temp_new_i64(); - - for (pass = 0; pass <= q; ++pass) { - uint64_t val = 0; - int n; - - for (n = 0; n < 8; n++) { - if (imm & (1 << (n + pass * 8))) { - val |= 0xffull << (n * 8); - } - } - tcg_gen_movi_i64(t64, val); - neon_store_reg64(t64, rd + pass); - } - tcg_temp_free_i64(t64); - } else { - tcg_gen_gvec_dup_imm(MO_32, reg_ofs, vec_size, - vec_size, imm); - } - } - } + /* Two registers and shift or reg and imm: handled by decodetree */ + return 1; } else { /* (insn & 0x00800010 == 0x00800000) */ if (size != 3) { op = (insn >> 8) & 0xf; -- 2.20.1 First arm pullreq of the cycle; this is mostly my softfloat NaN handling series. (Lots more in my to-review queue, but I don't like pullreqs growing too close to a hundred patches at a time :-)) thanks -- PMM The following changes since commit 97f2796a3736ed37a1b85dc1c76a6c45b829dd17: Open 10.0 development tree (2024-12-10 17:41:17 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20241211 for you to fetch changes up to 1abe28d519239eea5cf9620bb13149423e5665f8: MAINTAINERS: Add correct email address for Vikram Garhwal (2024-12-11 15:31:09 +0000) ---------------------------------------------------------------- target-arm queue: * hw/net/lan9118: Extract PHY model, reuse with imx_fec, fix bugs * fpu: Make muladd NaN handling runtime-selected, not compile-time * fpu: Make default NaN pattern runtime-selected, not compile-time * fpu: Minor NaN-related cleanups * MAINTAINERS: email address updates ---------------------------------------------------------------- Bernhard Beschow (5): hw/net/lan9118: Extract lan9118_phy hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations hw/net/lan9118_phy: Fix off-by-one error in MII_ANLPAR register hw/net/lan9118_phy: Reuse MII constants hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement Leif Lindholm (1): MAINTAINERS: update email address for Leif Lindholm Peter Maydell (54): fpu: handle raising Invalid for infzero in pick_nan_muladd fpu: Check for default_nan_mode before calling pickNaNMulAdd softfloat: Allow runtime choice of inf * 0 + NaN result tests/fp: Explicitly set inf-zero-nan rule target/arm: Set FloatInfZeroNaNRule explicitly target/s390: Set FloatInfZeroNaNRule explicitly target/ppc: Set FloatInfZeroNaNRule explicitly target/mips: Set FloatInfZeroNaNRule explicitly target/sparc: Set FloatInfZeroNaNRule explicitly target/xtensa: Set FloatInfZeroNaNRule explicitly target/x86: Set FloatInfZeroNaNRule explicitly target/loongarch: Set FloatInfZeroNaNRule explicitly target/hppa: Set FloatInfZeroNaNRule explicitly softfloat: Pass have_snan to pickNaNMulAdd softfloat: Allow runtime choice of NaN propagation for muladd tests/fp: Explicitly set 3-NaN propagation rule target/arm: Set Float3NaNPropRule explicitly target/loongarch: Set Float3NaNPropRule explicitly target/ppc: Set Float3NaNPropRule explicitly target/s390x: Set Float3NaNPropRule explicitly target/sparc: Set Float3NaNPropRule explicitly target/mips: Set Float3NaNPropRule explicitly target/xtensa: Set Float3NaNPropRule explicitly target/i386: Set Float3NaNPropRule explicitly target/hppa: Set Float3NaNPropRule explicitly fpu: Remove use_first_nan field from float_status target/m68k: Don't pass NULL float_status to floatx80_default_nan() softfloat: Create floatx80 default NaN from parts64_default_nan target/loongarch: Use normal float_status in fclass_s and fclass_d helpers target/m68k: In frem helper, initialize local float_status from env->fp_status target/m68k: Init local float_status from env fp_status in gdb get/set reg target/sparc: Initialize local scratch float_status from env->fp_status target/ppc: Use env->fp_status in helper_compute_fprf functions fpu: Allow runtime choice of default NaN value tests/fp: Set default NaN pattern explicitly target/microblaze: Set default NaN pattern explicitly target/i386: Set default NaN pattern explicitly target/hppa: Set default NaN pattern explicitly target/alpha: Set default NaN pattern explicitly target/arm: Set default NaN pattern explicitly target/loongarch: Set default NaN pattern explicitly target/m68k: Set default NaN pattern explicitly target/mips: Set default NaN pattern explicitly target/openrisc: Set default NaN pattern explicitly target/ppc: Set default NaN pattern explicitly target/sh4: Set default NaN pattern explicitly target/rx: Set default NaN pattern explicitly target/s390x: Set default NaN pattern explicitly target/sparc: Set default NaN pattern explicitly target/xtensa: Set default NaN pattern explicitly target/hexagon: Set default NaN pattern explicitly target/riscv: Set default NaN pattern explicitly target/tricore: Set default NaN pattern explicitly fpu: Remove default handling for dnan_pattern Richard Henderson (11): target/arm: Copy entire float_status in is_ebf softfloat: Inline pickNaNMulAdd softfloat: Use goto for default nan case in pick_nan_muladd softfloat: Remove which from parts_pick_nan_muladd softfloat: Pad array size in pick_nan_muladd softfloat: Move propagateFloatx80NaN to softfloat.c softfloat: Use parts_pick_nan in propagateFloatx80NaN softfloat: Inline pickNaN softfloat: Share code between parts_pick_nan cases softfloat: Sink frac_cmp in parts_pick_nan until needed softfloat: Replace WHICH with RET in parts_pick_nan Vikram Garhwal (1): MAINTAINERS: Add correct email address for Vikram Garhwal MAINTAINERS | 4 +- include/fpu/softfloat-helpers.h | 38 +++- include/fpu/softfloat-types.h | 89 +++++++- include/hw/net/imx_fec.h | 9 +- include/hw/net/lan9118_phy.h | 37 ++++ include/hw/net/mii.h | 6 + target/mips/fpu_helper.h | 20 ++ target/sparc/helper.h | 4 +- fpu/softfloat.c | 19 ++ hw/net/imx_fec.c | 146 ++------------ hw/net/lan9118.c | 137 ++----------- hw/net/lan9118_phy.c | 222 ++++++++++++++++++++ linux-user/arm/nwfpe/fpa11.c | 5 + target/alpha/cpu.c | 2 + target/arm/cpu.c | 10 + target/arm/tcg/vec_helper.c | 20 +- target/hexagon/cpu.c | 2 + target/hppa/fpu_helper.c | 12 ++ target/i386/tcg/fpu_helper.c | 12 ++ target/loongarch/tcg/fpu_helper.c | 14 +- target/m68k/cpu.c | 14 +- target/m68k/fpu_helper.c | 6 +- target/m68k/helper.c | 6 +- target/microblaze/cpu.c | 2 + target/mips/msa.c | 10 + target/openrisc/cpu.c | 2 + target/ppc/cpu_init.c | 19 ++ target/ppc/fpu_helper.c | 3 +- target/riscv/cpu.c | 2 + target/rx/cpu.c | 2 + target/s390x/cpu.c | 5 + target/sh4/cpu.c | 2 + target/sparc/cpu.c | 6 + target/sparc/fop_helper.c | 8 +- target/sparc/translate.c | 4 +- target/tricore/helper.c | 2 + target/xtensa/cpu.c | 4 + target/xtensa/fpu_helper.c | 3 +- tests/fp/fp-bench.c | 7 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 7 + fpu/softfloat-parts.c.inc | 152 +++++++++++--- fpu/softfloat-specialize.c.inc | 412 ++------------------------------------ .mailmap | 5 +- hw/net/Kconfig | 5 + hw/net/meson.build | 1 + hw/net/trace-events | 10 +- 47 files changed, 778 insertions(+), 730 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c From: Bernhard Beschow <shentey@gmail.com> A very similar implementation of the same device exists in imx_fec. Prepare for a common implementation by extracting a device model into its own files. Some migration state has been moved into the new device model which breaks migration compatibility for the following machines: * smdkc210 * realview-* * vexpress-* * kzm * mps2-* While breaking migration ABI, fix the size of the MII registers to be 16 bit, as defined by IEEE 802.3u. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118_phy.h | 37 ++++++++ hw/net/lan9118.c | 137 +++++----------------------- hw/net/lan9118_phy.c | 169 +++++++++++++++++++++++++++++++++++ hw/net/Kconfig | 4 + hw/net/meson.build | 1 + 5 files changed, 233 insertions(+), 115 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c diff --git a/include/hw/net/lan9118_phy.h b/include/hw/net/lan9118_phy.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118_phy.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_PHY_H +#define HW_NET_LAN9118_PHY_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +#define TYPE_LAN9118_PHY "lan9118-phy" +OBJECT_DECLARE_SIMPLE_TYPE(Lan9118PhyState, LAN9118_PHY) + +typedef struct Lan9118PhyState { + SysBusDevice parent_obj; + + uint16_t status; + uint16_t control; + uint16_t advertise; + uint16_t ints; + uint16_t int_mask; + qemu_irq irq; + bool link_down; +} Lan9118PhyState; + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down); +void lan9118_phy_reset(Lan9118PhyState *s); +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg); +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val); + +#endif diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "net/net.h" #include "net/eth.h" #include "hw/irq.h" +#include "hw/net/lan9118_phy.h" #include "hw/net/lan9118.h" #include "hw/ptimer.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0) #define MAC_CR_RXEN 0x00000004 #define MAC_CR_RESERVED 0x7f404213 -#define PHY_INT_ENERGYON 0x80 -#define PHY_INT_AUTONEG_COMPLETE 0x40 -#define PHY_INT_FAULT 0x20 -#define PHY_INT_DOWN 0x10 -#define PHY_INT_AUTONEG_LP 0x08 -#define PHY_INT_PARFAULT 0x04 -#define PHY_INT_AUTONEG_PAGE 0x02 - #define GPT_TIMER_EN 0x20000000 /* @@ -XXX,XX +XXX,XX @@ struct lan9118_state { uint32_t mac_mii_data; uint32_t mac_flow; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; int32_t eeprom_writable; uint8_t eeprom[128]; @@ -XXX,XX +XXX,XX @@ struct lan9118_state { static const VMStateDescription vmstate_lan9118 = { .name = "lan9118", - .version_id = 2, - .minimum_version_id = 1, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_PTIMER(timer, lan9118_state), VMSTATE_UINT32(irq_cfg, lan9118_state), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118 = { VMSTATE_UINT32(mac_mii_acc, lan9118_state), VMSTATE_UINT32(mac_mii_data, lan9118_state), VMSTATE_UINT32(mac_flow, lan9118_state), - VMSTATE_UINT32(phy_status, lan9118_state), - VMSTATE_UINT32(phy_control, lan9118_state), - VMSTATE_UINT32(phy_advertise, lan9118_state), - VMSTATE_UINT32(phy_int, lan9118_state), - VMSTATE_UINT32(phy_int_mask, lan9118_state), VMSTATE_INT32(eeprom_writable, lan9118_state), VMSTATE_UINT8_ARRAY(eeprom, lan9118_state, 128), VMSTATE_INT32(tx_fifo_size, lan9118_state), @@ -XXX,XX +XXX,XX @@ static void lan9118_reload_eeprom(lan9118_state *s) lan9118_mac_changed(s); } -static void phy_update_irq(lan9118_state *s) +static void lan9118_update_irq(void *opaque, int n, int level) { - if (s->phy_int & s->phy_int_mask) { + lan9118_state *s = opaque; + + if (level) { s->int_sts |= PHY_INT; } else { s->int_sts &= ~PHY_INT; @@ -XXX,XX +XXX,XX @@ static void phy_update_irq(lan9118_state *s) lan9118_update(s); } -static void phy_update_link(lan9118_state *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - phy_update_irq(s); -} - static void lan9118_set_link(NetClientState *nc) { - phy_update_link(qemu_get_nic_opaque(nc)); -} - -static void phy_reset(lan9118_state *s) -{ - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - phy_update_link(s); + lan9118_phy_update_link(&LAN9118(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static void lan9118_reset(DeviceState *d) @@ -XXX,XX +XXX,XX @@ static void lan9118_reset(DeviceState *d) s->read_word_n = 0; s->write_word_n = 0; - phy_reset(s); - s->eeprom_writable = 0; lan9118_reload_eeprom(s); } @@ -XXX,XX +XXX,XX @@ static void do_tx_packet(lan9118_state *s) uint32_t status; /* FIXME: Honor TX disable, and allow queueing of packets. */ - if (s->phy_control & 0x4000) { + if (s->mii.control & 0x4000) { /* This assumes the receive routine doesn't touch the VLANClient. */ qemu_receive_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len); } else { @@ -XXX,XX +XXX,XX @@ static void tx_fifo_push(lan9118_state *s, uint32_t val) } } -static uint32_t do_phy_read(lan9118_state *s, int reg) -{ - uint32_t val; - - switch (reg) { - case 0: /* Basic Control */ - return s->phy_control; - case 1: /* Basic Status */ - return s->phy_status; - case 2: /* ID1 */ - return 0x0007; - case 3: /* ID2 */ - return 0xc0d1; - case 4: /* Auto-neg advertisement */ - return s->phy_advertise; - case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; - case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - phy_update_irq(s); - return val; - case 30: /* Interrupt mask */ - return s->phy_int_mask; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_read: PHY read reg %d\n", reg); - return 0; - } -} - -static void do_phy_write(lan9118_state *s, int reg, uint32_t val) -{ - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - phy_reset(s); - break; - } - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - /* TODO 17, 18, 27, 31 */ - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - phy_update_irq(s); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_write: PHY write reg %d = 0x%04x\n", reg, val); - } -} - static void do_mac_write(lan9118_state *s, int reg, uint32_t val) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static void do_mac_write(lan9118_state *s, int reg, uint32_t val) if (val & 2) { DPRINTF("PHY write %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); - do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data); + lan9118_phy_write(&s->mii, (val >> 6) & 0x1f, s->mac_mii_data); } else { - s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f); + s->mac_mii_data = lan9118_phy_read(&s->mii, (val >> 6) & 0x1f); DPRINTF("PHY read %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); } @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, break; case CSR_PMT_CTRL: if (val & 0x400) { - phy_reset(s); + lan9118_phy_reset(&s->mii); } s->pmt_ctrl &= ~0x34e; s->pmt_ctrl |= (val & 0x34e); @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) const MemoryRegionOps *mem_ops = s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops; + qemu_init_irq(&s->mii_irq, lan9118_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + memory_region_init_io(&s->mmio, OBJECT(dev), mem_ops, s, "lan9118-mmio", 0x100); sysbus_init_mmio(sbd, &s->mmio); diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This code is licensed under the GNU GPL v2 + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" +#include "hw/resettable.h" +#include "migration/vmstate.h" +#include "qemu/log.h" + +#define PHY_INT_ENERGYON (1 << 7) +#define PHY_INT_AUTONEG_COMPLETE (1 << 6) +#define PHY_INT_FAULT (1 << 5) +#define PHY_INT_DOWN (1 << 4) +#define PHY_INT_AUTONEG_LP (1 << 3) +#define PHY_INT_PARFAULT (1 << 2) +#define PHY_INT_AUTONEG_PAGE (1 << 1) + +static void lan9118_phy_update_irq(Lan9118PhyState *s) +{ + qemu_set_irq(s->irq, !!(s->ints & s->int_mask)); +} + +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) +{ + uint16_t val; + + switch (reg) { + case 0: /* Basic Control */ + return s->control; + case 1: /* Basic Status */ + return s->status; + case 2: /* ID1 */ + return 0x0007; + case 3: /* ID2 */ + return 0xc0d1; + case 4: /* Auto-neg advertisement */ + return s->advertise; + case 5: /* Auto-neg Link Partner Ability */ + return 0x0f71; + case 6: /* Auto-neg Expansion */ + return 1; + /* TODO 17, 18, 27, 29, 30, 31 */ + case 29: /* Interrupt source. */ + val = s->ints; + s->ints = 0; + lan9118_phy_update_irq(s); + return val; + case 30: /* Interrupt mask */ + return s->int_mask; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_read: PHY read reg %d\n", reg); + return 0; + } +} + +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) +{ + switch (reg) { + case 0: /* Basic Control */ + if (val & 0x8000) { + lan9118_phy_reset(s); + break; + } + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } + break; + case 4: /* Auto-neg advertisement */ + s->advertise = (val & 0x2d7f) | 0x80; + break; + /* TODO 17, 18, 27, 31 */ + case 30: /* Interrupt mask */ + s->int_mask = val & 0xff; + lan9118_phy_update_irq(s); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + } +} + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) +{ + s->link_down = link_down; + + /* Autonegotiation status mirrors link status. */ + if (link_down) { + s->status &= ~0x0024; + s->ints |= PHY_INT_DOWN; + } else { + s->status |= 0x0024; + s->ints |= PHY_INT_ENERGYON; + s->ints |= PHY_INT_AUTONEG_COMPLETE; + } + lan9118_phy_update_irq(s); +} + +void lan9118_phy_reset(Lan9118PhyState *s) +{ + s->control = 0x3000; + s->status = 0x7809; + s->advertise = 0x01e1; + s->int_mask = 0; + s->ints = 0; + lan9118_phy_update_link(s, s->link_down); +} + +static void lan9118_phy_reset_hold(Object *obj, ResetType type) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + lan9118_phy_reset(s); +} + +static void lan9118_phy_init(Object *obj) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + qdev_init_gpio_out(DEVICE(s), &s->irq, 1); +} + +static const VMStateDescription vmstate_lan9118_phy = { + .name = "lan9118-phy", + .version_id = 1, + .minimum_version_id = 1, + .fields = (const VMStateField[]) { + VMSTATE_UINT16(control, Lan9118PhyState), + VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(advertise, Lan9118PhyState), + VMSTATE_UINT16(ints, Lan9118PhyState), + VMSTATE_UINT16(int_mask, Lan9118PhyState), + VMSTATE_BOOL(link_down, Lan9118PhyState), + VMSTATE_END_OF_LIST() + } +}; + +static void lan9118_phy_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + rc->phases.hold = lan9118_phy_reset_hold; + dc->vmsd = &vmstate_lan9118_phy; +} + +static const TypeInfo types[] = { + { + .name = TYPE_LAN9118_PHY, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Lan9118PhyState), + .instance_init = lan9118_phy_init, + .class_init = lan9118_phy_class_init, + } +}; + +DEFINE_TYPES(types) diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config VMXNET3_PCI config SMC91C111 bool +config LAN9118_PHY + bool + config LAN9118 bool + select LAN9118_PHY select PTIMER config NE2000_ISA diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_VMXNET3_PCI', if_true: files('vmxnet3.c')) system_ss.add(when: 'CONFIG_SMC91C111', if_true: files('smc91c111.c')) system_ss.add(when: 'CONFIG_LAN9118', if_true: files('lan9118.c')) +system_ss.add(when: 'CONFIG_LAN9118_PHY', if_true: files('lan9118_phy.c')) system_ss.add(when: 'CONFIG_NE2000_ISA', if_true: files('ne2000-isa.c')) system_ss.add(when: 'CONFIG_OPENCORES_ETH', if_true: files('opencores_eth.c')) system_ss.add(when: 'CONFIG_XGMAC', if_true: files('xgmac.c')) -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> imx_fec models the same PHY as lan9118_phy. The code is almost the same with imx_fec having more logging and tracing. Merge these improvements into lan9118_phy and reuse in imx_fec to fix the code duplication. Some migration state how resides in the new device model which breaks migration compatibility for the following machines: * imx25-pdk * sabrelite * mcimx7d-sabre * mcimx6ul-evk Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-3-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 9 ++- hw/net/imx_fec.c | 146 ++++----------------------------------- hw/net/lan9118_phy.c | 82 ++++++++++++++++------ hw/net/Kconfig | 1 + hw/net/trace-events | 10 +-- 5 files changed, 85 insertions(+), 163 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXFECState, IMX_FEC) #define TYPE_IMX_ENET "imx.enet" #include "hw/sysbus.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" #include "net/net.h" #define ENET_EIR 1 @@ -XXX,XX +XXX,XX @@ struct IMXFECState { uint32_t tx_descriptor[ENET_TX_RING_NUM]; uint32_t tx_ring_num; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; uint32_t phy_num; bool phy_connected; struct IMXFECState *phy_consumer; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth_txdescs = { static const VMStateDescription vmstate_imx_eth = { .name = TYPE_IMX_FEC, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX), VMSTATE_UINT32(rx_descriptor, IMXFECState), VMSTATE_UINT32(tx_descriptor[0], IMXFECState), - VMSTATE_UINT32(phy_status, IMXFECState), - VMSTATE_UINT32(phy_control, IMXFECState), - VMSTATE_UINT32(phy_advertise, IMXFECState), - VMSTATE_UINT32(phy_int, IMXFECState), - VMSTATE_UINT32(phy_int_mask, IMXFECState), VMSTATE_END_OF_LIST() }, .subsections = (const VMStateDescription * const []) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth = { }, }; -#define PHY_INT_ENERGYON (1 << 7) -#define PHY_INT_AUTONEG_COMPLETE (1 << 6) -#define PHY_INT_FAULT (1 << 5) -#define PHY_INT_DOWN (1 << 4) -#define PHY_INT_AUTONEG_LP (1 << 3) -#define PHY_INT_PARFAULT (1 << 2) -#define PHY_INT_AUTONEG_PAGE (1 << 1) - static void imx_eth_update(IMXFECState *s); /* @@ -XXX,XX +XXX,XX @@ static void imx_eth_update(IMXFECState *s); * For now we don't handle any GPIO/interrupt line, so the OS will * have to poll for the PHY status. */ -static void imx_phy_update_irq(IMXFECState *s) +static void imx_phy_update_irq(void *opaque, int n, int level) { - imx_eth_update(s); -} - -static void imx_phy_update_link(IMXFECState *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - trace_imx_phy_update_link("down"); - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - trace_imx_phy_update_link("up"); - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - imx_phy_update_irq(s); + imx_eth_update(opaque); } static void imx_eth_set_link(NetClientState *nc) { - imx_phy_update_link(IMX_FEC(qemu_get_nic_opaque(nc))); -} - -static void imx_phy_reset(IMXFECState *s) -{ - trace_imx_phy_reset(); - - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - imx_phy_update_link(s); + lan9118_phy_update_link(&IMX_FEC(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static uint32_t imx_phy_read(IMXFECState *s, int reg) { - uint32_t val; uint32_t phy = reg / 32; if (!s->phy_connected) { @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) reg %= 32; - switch (reg) { - case 0: /* Basic Control */ - val = s->phy_control; - break; - case 1: /* Basic Status */ - val = s->phy_status; - break; - case 2: /* ID1 */ - val = 0x0007; - break; - case 3: /* ID2 */ - val = 0xc0d1; - break; - case 4: /* Auto-neg advertisement */ - val = s->phy_advertise; - break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; - break; - case 6: /* Auto-neg Expansion */ - val = 1; - break; - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - imx_phy_update_irq(s); - break; - case 30: /* Interrupt mask */ - val = s->phy_int_mask; - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy]%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - } - - trace_imx_phy_read(val, phy, reg); - - return val; + return lan9118_phy_read(&s->mii, reg); } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) @@ -XXX,XX +XXX,XX @@ static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) reg %= 32; - trace_imx_phy_write(val, phy, reg); - - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - imx_phy_reset(s); - } else { - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - imx_phy_update_irq(s); - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy)%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - break; - } + lan9118_phy_write(&s->mii, reg, val); } static void imx_fec_read_bd(IMXFECBufDesc *bd, dma_addr_t addr) @@ -XXX,XX +XXX,XX @@ static void imx_eth_reset(DeviceState *d) s->rx_descriptor = 0; memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor)); - - /* We also reset the PHY */ - imx_phy_reset(s); } static uint32_t imx_default_read(IMXFECState *s, uint32_t index) @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq[0]); sysbus_init_irq(sbd, &s->irq[1]); + qemu_init_irq(&s->mii_irq, imx_phy_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + qemu_macaddr_default_if_unset(&s->conf.macaddr); s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf, diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ * Copyright (c) 2009 CodeSourcery, LLC. * Written by Paul Brook * + * Copyright (c) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net> + * * This code is licensed under the GNU GPL v2 * * Contributions after 2012-01-13 are licensed under the terms of the @@ -XXX,XX +XXX,XX @@ #include "hw/resettable.h" #include "migration/vmstate.h" #include "qemu/log.h" +#include "trace.h" #define PHY_INT_ENERGYON (1 << 7) #define PHY_INT_AUTONEG_COMPLETE (1 << 6) @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) switch (reg) { case 0: /* Basic Control */ - return s->control; + val = s->control; + break; case 1: /* Basic Status */ - return s->status; + val = s->status; + break; case 2: /* ID1 */ - return 0x0007; + val = 0x0007; + break; case 3: /* ID2 */ - return 0xc0d1; + val = 0xc0d1; + break; case 4: /* Auto-neg advertisement */ - return s->advertise; + val = s->advertise; + break; case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; + val = 0x0f71; + break; case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ + val = 1; + break; case 29: /* Interrupt source. */ val = s->ints; s->ints = 0; lan9118_phy_update_irq(s); - return val; + break; case 30: /* Interrupt mask */ - return s->int_mask; + val = s->int_mask; + break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + val = 0; + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_read: PHY read reg %d\n", reg); - return 0; + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + val = 0; + break; } + + trace_lan9118_phy_read(val, reg); + + return val; } void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) { + trace_lan9118_phy_write(val, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { lan9118_phy_reset(s); - break; - } - s->control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + } else { + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } } break; case 4: /* Auto-neg advertisement */ s->advertise = (val & 0x2d7f) | 0x80; break; - /* TODO 17, 18, 27, 31 */ case 30: /* Interrupt mask */ s->int_mask = val & 0xff; lan9118_phy_update_irq(s); break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + break; } } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { + trace_lan9118_phy_update_link("down"); s->status &= ~0x0024; s->ints |= PHY_INT_DOWN; } else { + trace_lan9118_phy_update_link("up"); s->status |= 0x0024; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) void lan9118_phy_reset(Lan9118PhyState *s) { + trace_lan9118_phy_reset(); + s->control = 0x3000; s->status = 0x7809; s->advertise = 0x01e1; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_phy = { .version_id = 1, .minimum_version_id = 1, .fields = (const VMStateField[]) { - VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(advertise, Lan9118PhyState), VMSTATE_UINT16(ints, Lan9118PhyState), VMSTATE_UINT16(int_mask, Lan9118PhyState), diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_SUN8I_EMAC config IMX_FEC bool + select LAN9118_PHY config CADENCE bool diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 +# lan9118_phy.c +lan9118_phy_read(uint16_t val, int reg) "[0x%02x] -> 0x%04" PRIx16 +lan9118_phy_write(uint16_t val, int reg) "[0x%02x] <- 0x%04" PRIx16 +lan9118_phy_update_link(const char *s) "%s" +lan9118_phy_reset(void) "" + # lance.c lance_mem_readw(uint64_t addr, uint32_t ret) "addr=0x%"PRIx64"val=0x%04x" lance_mem_writew(uint64_t addr, uint32_t val) "addr=0x%"PRIx64"val=0x%04x" @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" imx_phy_read_num(int phy, int configured) "read request from unconfigured phy %d (configured %d)" -imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_write_num(int phy, int configured) "write request to unconfigured phy %d (configured %d)" -imx_phy_update_link(const char *s) "%s" -imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" imx_enet_read_bd(uint64_t addr, int flags, int len, int data, int options, int status) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x option 0x%04x status 0x%04x" imx_eth_tx_bd_busy(void) "tx_bd ran out of descriptors to transmit" -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Turns 0x70 into 0xe0 (== 0x70 << 1) which adds the missing MII_ANLPAR_TX and fixes the MSB of selector field to be zero, as specified in the datasheet. Fixes: 2a424990170b "LAN9118 emulation" Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-4-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) val = s->advertise; break; case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; + val = 0x0fe1; break; case 6: /* Auto-neg Expansion */ val = 1; -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Prefer named constants over magic values for better readability. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-5-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/mii.h | 6 +++++ hw/net/lan9118_phy.c | 63 ++++++++++++++++++++++++++++---------------- 2 files changed, 46 insertions(+), 23 deletions(-) diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/mii.h +++ b/include/hw/net/mii.h @@ -XXX,XX +XXX,XX @@ #define MII_BMSR_JABBER (1 << 1) /* Jabber detected */ #define MII_BMSR_EXTCAP (1 << 0) /* Ext-reg capability */ +#define MII_ANAR_RFAULT (1 << 13) /* Say we can detect faults */ #define MII_ANAR_PAUSE_ASYM (1 << 11) /* Try for asymmetric pause */ #define MII_ANAR_PAUSE (1 << 10) /* Try for pause */ #define MII_ANAR_TXFD (1 << 8) @@ -XXX,XX +XXX,XX @@ #define MII_ANAR_10FD (1 << 6) #define MII_ANAR_10 (1 << 5) #define MII_ANAR_CSMACD (1 << 0) +#define MII_ANAR_SELECT (0x001f) /* Selector bits */ #define MII_ANLPAR_ACK (1 << 14) #define MII_ANLPAR_PAUSEASY (1 << 11) /* can pause asymmetrically */ @@ -XXX,XX +XXX,XX @@ #define RTL8201CP_PHYID1 0x0000 #define RTL8201CP_PHYID2 0x8201 +/* SMSC LAN9118 */ +#define SMSCLAN9118_PHYID1 0x0007 +#define SMSCLAN9118_PHYID2 0xc0d1 + /* RealTek 8211E */ #define RTL8211E_PHYID1 0x001c #define RTL8211E_PHYID2 0xc915 diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/net/lan9118_phy.h" +#include "hw/net/mii.h" #include "hw/irq.h" #include "hw/resettable.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) uint16_t val; switch (reg) { - case 0: /* Basic Control */ + case MII_BMCR: val = s->control; break; - case 1: /* Basic Status */ + case MII_BMSR: val = s->status; break; - case 2: /* ID1 */ - val = 0x0007; + case MII_PHYID1: + val = SMSCLAN9118_PHYID1; break; - case 3: /* ID2 */ - val = 0xc0d1; + case MII_PHYID2: + val = SMSCLAN9118_PHYID2; break; - case 4: /* Auto-neg advertisement */ + case MII_ANAR: val = s->advertise; break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0fe1; + case MII_ANLPAR: + val = MII_ANLPAR_PAUSEASY | MII_ANLPAR_PAUSE | MII_ANLPAR_T4 | + MII_ANLPAR_TXFD | MII_ANLPAR_TX | MII_ANLPAR_10FD | + MII_ANLPAR_10 | MII_ANLPAR_CSMACD; break; - case 6: /* Auto-neg Expansion */ - val = 1; + case MII_ANER: + val = MII_ANER_NWAY; break; case 29: /* Interrupt source. */ val = s->ints; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) trace_lan9118_phy_write(val, reg); switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { + case MII_BMCR: + if (val & MII_BMCR_RESET) { lan9118_phy_reset(s); } else { - s->control = val & 0x7980; + s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 | + MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD | + MII_BMCR_CTST); /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + if (val & MII_BMCR_AUTOEN) { + s->status |= MII_BMSR_AN_COMP; } } break; - case 4: /* Auto-neg advertisement */ - s->advertise = (val & 0x2d7f) | 0x80; + case MII_ANAR: + s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | + MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | + MII_ANAR_SELECT)) + | MII_ANAR_TX; break; case 30: /* Interrupt mask */ s->int_mask = val & 0xff; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { trace_lan9118_phy_update_link("down"); - s->status &= ~0x0024; + s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST); s->ints |= PHY_INT_DOWN; } else { trace_lan9118_phy_update_link("up"); - s->status |= 0x0024; + s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_reset(Lan9118PhyState *s) { trace_lan9118_phy_reset(); - s->control = 0x3000; - s->status = 0x7809; - s->advertise = 0x01e1; + s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100; + s->status = MII_BMSR_100TX_FD + | MII_BMSR_100TX_HD + | MII_BMSR_10T_FD + | MII_BMSR_10T_HD + | MII_BMSR_AUTONEG + | MII_BMSR_EXTCAP; + s->advertise = MII_ANAR_TXFD + | MII_ANAR_TX + | MII_ANAR_10FD + | MII_ANAR_10 + | MII_ANAR_CSMACD; s->int_mask = 0; s->ints = 0; lan9118_phy_update_link(s, s->link_down); -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> The real device advertises this mode and the device model already advertises 100 mbps half duplex and 10 mbps full+half duplex. So advertise this mode to make the model more realistic. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-6-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) break; case MII_ANAR: s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | - MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | - MII_ANAR_SELECT)) + MII_ANAR_PAUSE | MII_ANAR_TXFD | MII_ANAR_10FD | + MII_ANAR_10 | MII_ANAR_SELECT)) | MII_ANAR_TX; break; case 30: /* Interrupt mask */ -- 2.34.1 For IEEE fused multiply-add, the (0 * inf) + NaN case should raise Invalid for the multiplication of 0 by infinity. Currently we handle this in the per-architecture ifdef ladder in pickNaNMulAdd(). However, since this isn't really architecture specific we can hoist it up to the generic code. For the cases where the infzero test in pickNaNMulAdd was returning 2, we can delete the check entirely and allow the code to fall into the normal pick-a-NaN handling, because this will return 2 anyway (input 'c' being the only NaN in this case). For the cases where infzero was returning 3 to indicate "return the default NaN", we must retain that "return 3". For Arm, this looks like it might be a behaviour change because we used to set float_flag_invalid | float_flag_invalid_imz only if C is a quiet NaN. However, it is not, because Arm target code never looks at float_flag_invalid_imz, and for the (0 * inf) + SNaN case we already raised float_flag_invalid via the "abc_mask & float_cmask_snan" check in pick_nan_muladd. For any target architecture using the "default implementation" at the bottom of the ifdef, this is a behaviour change but will be fixing a bug (where we failed to raise the Invalid exception for (0 * inf + QNaN). The architectures using the default case are: * hppa * i386 * sh4 * tricore The x86, Tricore and SH4 CPU architecture manuals are clear that this should have raised Invalid; HPPA is a bit vaguer but still seems clear enough. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-2-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 13 +++++++------ fpu/softfloat-specialize.c.inc | 29 +---------------------------- 2 files changed, 8 insertions(+), 34 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, int ab_mask, int abc_mask) { int which; + bool infzero = (ab_mask == float_cmask_infzero); if (unlikely(abc_mask & float_cmask_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, - ab_mask == float_cmask_infzero, s); + if (infzero) { + /* This is (0 * inf) + NaN or (inf * 0) + NaN */ + float_raise(float_flag_invalid | float_flag_invalid_imz, s); + } + + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); if (s->default_nan_mode || which == 3) { - /* - * Note that this check is after pickNaNMulAdd so that function - * has an opportunity to set the Invalid flag for infzero. - */ parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * the default NaN */ if (infzero && is_qnan(c_cls)) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * case sets InvalidOp and returns the default NaN */ if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } /* Prefer sNaN over qNaN, in the a, b, c order. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } + /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * to return an input NaN if we have one (ie c) rather than generating * a default NaN */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_RISCV) - /* For RISC-V, InvalidOp is set when multiplicands are Inf and zero */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - } return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } #elif defined(TARGET_SPARC) - /* For (inf,0,nan) return c. */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer SNaN over QNaN, order C, B, A. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns * an input NaN if we have one (ie c). */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } if (status->use_first_nan) { if (is_nan(a_cls)) { return 0; -- 2.34.1 If the target sets default_nan_mode then we're always going to return the default NaN, and pickNaNMulAdd() no longer has any side effects. For consistency with pickNaN(), check for default_nan_mode before calling pickNaNMulAdd(). When we convert pickNaNMulAdd() to allow runtime selection of the NaN propagation rule, this means we won't have to make the targets which use default_nan_mode also set a propagation rule. Since RiscV always uses default_nan_mode, this allows us to remove its ifdef case from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-3-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 8 ++++++-- fpu/softfloat-specialize.c.inc | 9 +++++++-- 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, float_raise(float_flag_invalid | float_flag_invalid_imz, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + if (s->default_nan_mode) { + which = 3; + } else { + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + } - if (s->default_nan_mode || which == 3) { + if (which == 3) { parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ + assert(!status->default_nan_mode); #if defined(TARGET_ARM) /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns * the default NaN @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { return 1; } -#elif defined(TARGET_RISCV) - return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { return 3; -- 2.34.1 IEEE 758 does not define a fixed rule for what NaN to return in the case of a fused multiply-add of inf * 0 + NaN. Different architectures thus do different things: * some return the default NaN * some return the input NaN * Arm returns the default NaN if the input NaN is quiet, and the input NaN if it is signalling We want to make this logic be runtime selected rather than hardcoded into the binary, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. Note that four architectures both use the muladd softfloat functions and did not have a branch of the ifdef ladder to specify their behaviour (and so were ending up with the "default" case, probably wrongly): i386, HPPA, SH4 and Tricore. SH4 and Tricore both set default_nan_mode, and so will never get into pickNaNMulAdd(). For HPPA and i386 we retain the same behaviour as the old default-case, which is to not ever return the default NaN. This might not be correct but it is not a behaviour change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-4-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 ++++ include/fpu/softfloat-types.h | 23 +++++++++ fpu/softfloat-specialize.c.inc | 91 ++++++++++++++++++++++----------- 3 files changed, 95 insertions(+), 30 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, + float_status *status) +{ + status->float_infzeronan_rule = rule; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) +{ + return status->float_infzeronan_rule; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * Rule for result of fused multiply-add 0 * Inf + NaN. + * This must be a NaN, but implementations differ on whether this + * is the input NaN or the default NaN. + * + * You don't need to set this if default_nan_mode is enabled. + * When not in default-NaN mode, it is an error for the target + * not to set the rule in float_status if it uses muladd, and we + * will assert if we need to handle an input NaN and no rule was + * selected. + */ +typedef enum __attribute__((__packed__)) { + /* No propagation rule specified */ + float_infzeronan_none = 0, + /* Result is never the default NaN (so always the input NaN) */ + float_infzeronan_dnan_never, + /* Result is always the default NaN */ + float_infzeronan_dnan_always, + /* Result is the default NaN if the input NaN is quiet */ + float_infzeronan_dnan_if_qnan, +} FloatInfZeroNaNRule; + /* * Floating Point Status. Individual architectures may maintain * several versions of float_status for different functions. The @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ bool flush_to_zero; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + FloatInfZeroNaNRule rule = status->float_infzeronan_rule; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * specify. */ assert(!status->default_nan_mode); + + if (rule == float_infzeronan_none) { + /* + * Temporarily fall back to ifdef ladder + */ #if defined(TARGET_ARM) - /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns - * the default NaN - */ - if (infzero && is_qnan(c_cls)) { - return 3; + /* + * For ARM, the (inf,zero,qnan) case returns the default NaN, + * but (inf,zero,snan) returns the input NaN. + */ + rule = float_infzeronan_dnan_if_qnan; +#elif defined(TARGET_MIPS) + if (snan_bit_is_one(status)) { + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN + */ + rule = float_infzeronan_dnan_always; + } else { + /* + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + rule = float_infzeronan_dnan_never; + } +#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ + defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ + defined(TARGET_I386) || defined(TARGET_LOONGARCH) + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + rule = float_infzeronan_dnan_never; +#elif defined(TARGET_S390X) + rule = float_infzeronan_dnan_always; +#endif } + if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the default NaN here, + * and some return the input NaN. + */ + switch (rule) { + case float_infzeronan_dnan_never: + return 2; + case float_infzeronan_dnan_always: + return 3; + case float_infzeronan_dnan_if_qnan: + return is_qnan(c_cls) ? 3 : 2; + default: + g_assert_not_reached(); + } + } + +#if defined(TARGET_ARM) + /* This looks different from the ARM ARM pseudocode, because the ARM ARM * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } #elif defined(TARGET_MIPS) if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - if (infzero) { - return 3; - } /* Prefer sNaN over qNaN, in the a, b, c order. */ if (is_snan(a_cls)) { return 0; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } #elif defined(TARGET_LOONGARCH64) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_PPC) - /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_S390X) - if (infzero) { - return 3; - } - if (is_snan(a_cls)) { return 0; } else if (is_snan(b_cls)) { -- 2.34.1 Explicitly set a rule in the softfloat tests for the inf-zero-nan muladd special case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_infzeronan_dnan_if_qnan. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241202131347.498124-5-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 5 +++++ tests/fp/fp-test.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) { bench_func_t f; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) { unsigned int i; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); verCases_maxErrorCount = n_max_errors; -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the Arm target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-6-peter.maydell@linaro.org --- target/arm/cpu.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, + * and the input NaN if it is signalling */ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_ARM) - /* - * For ARM, the (inf,zero,qnan) case returns the default NaN, - * but (inf,zero,snan) returns the input NaN. - */ - rule = float_infzeronan_dnan_if_qnan; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { /* * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for s390, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-7-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_infzeronan_rule(float_infzeronan_dnan_always, + &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * a default NaN */ rule = float_infzeronan_dnan_never; -#elif defined(TARGET_S390X) - rule = float_infzeronan_dnan_always; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the PPC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-8-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ rule = float_infzeronan_dnan_never; } -#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ +#elif defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - /* - * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the MIPS target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-9-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 9 +++++++++ target/mips/msa.c | 4 ++++ fpu/softfloat-specialize.c.inc | 16 +--------------- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_flush_mode(CPUMIPSState *env) static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); + FloatInfZeroNaNRule izn_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ set_snan_bit_is_one(!nan2008, &env->active_fpu.fp_status); set_default_nan_mode(!nan2008, &env->active_fpu.fp_status); + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN. + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c'. + */ + izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; + set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* set proper signanling bit meaning ("1" means "quiet") */ set_snan_bit_is_one(0, &env->active_tc.msa_fp_status); + + /* Inf * 0 + NaN returns the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, + &env->active_tc.msa_fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - rule = float_infzeronan_dnan_always; - } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - rule = float_infzeronan_dnan_never; - } -#elif defined(TARGET_SPARC) || \ +#if defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the SPARC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-10-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_SPARC) || \ - defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the xtensa target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-11-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) reset_mmu(env); cs->halted = env->runstall; #endif + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the x86 target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-12-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->mmx_status); set_float_2nan_prop_rule(float_2nan_prop_x87, &env->sse_status); + /* + * Only SSE has multiply-add instructions. In the SDM Section 14.5.2 + * "Fused-Multiply-ADD (FMA) Numeric Behavior" the NaN handling is + * specified -- for 0 * inf + NaN the input NaN is selected, and if + * there are multiple input NaNs they are selected in the order a, b, c. + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * Temporarily fall back to ifdef ladder */ #if defined(TARGET_HPPA) || \ - defined(TARGET_I386) || defined(TARGET_LOONGARCH) + defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the loongarch target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-13-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 5 +++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) &env->fp_status); set_flush_to_zero(0, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_HPPA) || \ - defined(TARGET_LOONGARCH) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ +#if defined(TARGET_HPPA) rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the HPPA target, so we can remove the ifdef from pickNaNMulAdd(). As this is the last target to be converted to explicitly setting the rule, we can remove the fallback code in pickNaNMulAdd() entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-14-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 13 +------------ 2 files changed, 3 insertions(+), 12 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { - FloatInfZeroNaNRule rule = status->float_infzeronan_rule; - /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ assert(!status->default_nan_mode); - if (rule == float_infzeronan_none) { - /* - * Temporarily fall back to ifdef ladder - */ -#if defined(TARGET_HPPA) - rule = float_infzeronan_dnan_never; -#endif - } - if (infzero) { /* * Inf * 0 + NaN -- some implementations return the default NaN here, * and some return the input NaN. */ - switch (rule) { + switch (status->float_infzeronan_rule) { case float_infzeronan_dnan_never: return 2; case float_infzeronan_dnan_always: -- 2.34.1 The new implementation of pickNaNMulAdd() will find it convenient to know whether at least one of the three arguments to the muladd was a signaling NaN. We already calculate that in the caller, so pass it in as a new bool have_snan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-15-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 5 +++-- fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, { int which; bool infzero = (ab_mask == float_cmask_infzero); + bool have_snan = (abc_mask & float_cmask_snan); - if (unlikely(abc_mask & float_cmask_snan)) { + if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, if (s->default_nan_mode) { which = 3; } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, | Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN *----------------------------------------------------------------------------*/ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, float_status *status) + bool infzero, bool have_snan, float_status *status) { /* * We guarantee not to require the target to tell us how to -- 2.34.1 IEEE 758 does not define a fixed rule for which NaN to pick as the result if both operands of a 3-operand fused multiply-add operation are NaNs. As a result different architectures have ended up with different rules for propagating NaNs. QEMU currently hardcodes the NaN propagation logic into the binary because pickNaNMulAdd() has an ifdef ladder for different targets. We want to make the propagation rule instead be selectable at runtime, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. It's valid not to set a propagation rule if default_nan_mode is enabled, because in that case there's no need to pick a NaN; all the callers of pickNaNMulAdd() catch this case and skip calling it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-16-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++ include/fpu/softfloat-types.h | 55 +++++++++++ fpu/softfloat-specialize.c.inc | 167 ++++++++------------------------ 3 files changed, 107 insertions(+), 126 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_3nan_prop_rule(Float3NaNPropRule rule, + float_status *status) +{ + status->float_3nan_prop_rule = rule; +} + static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, float_status *status) { @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline Float3NaNPropRule get_float_3nan_prop_rule(float_status *status) +{ + return status->float_3nan_prop_rule; +} + static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) { return status->float_infzeronan_rule; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ this code that are retained. #ifndef SOFTFLOAT_TYPES_H #define SOFTFLOAT_TYPES_H +#include "hw/registerfields.h" + /* * Software IEC/IEEE floating-point types. */ @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * 3-input NaN propagation rule, for fused multiply-add. Individual + * architectures have different rules for which input NaN is + * propagated to the output when there is more than one NaN on the + * input. + * + * If default_nan_mode is enabled then it is valid not to set a NaN + * propagation rule, because the softfloat code guarantees not to try + * to pick a NaN to propagate in default NaN mode. When not in + * default-NaN mode, it is an error for the target not to set the rule + * in float_status if it uses a muladd, and we will assert if we need + * to handle an input NaN and no rule was selected. + * + * The naming scheme for Float3NaNPropRule values is: + * float_3nan_prop_s_abc: + * = "Prefer SNaN over QNaN, then operand A over B over C" + * float_3nan_prop_abc: + * = "Prefer A over B over C regardless of SNaN vs QNAN" + * + * For QEMU, the multiply-add operation is A * B + C. + */ + +/* + * We set the Float3NaNPropRule enum values up so we can select the + * right value in pickNaNMulAdd in a data driven way. + */ +FIELD(3NAN, 1ST, 0, 2) /* which operand is most preferred ? */ +FIELD(3NAN, 2ND, 2, 2) /* which operand is next most preferred ? */ +FIELD(3NAN, 3RD, 4, 2) /* which operand is least preferred ? */ +FIELD(3NAN, SNAN, 6, 1) /* do we prefer SNaN over QNaN ? */ + +#define PROPRULE(X, Y, Z) \ + ((X << R_3NAN_1ST_SHIFT) | (Y << R_3NAN_2ND_SHIFT) | (Z << R_3NAN_3RD_SHIFT)) + +typedef enum __attribute__((__packed__)) { + float_3nan_prop_none = 0, /* No propagation rule specified */ + float_3nan_prop_abc = PROPRULE(0, 1, 2), + float_3nan_prop_acb = PROPRULE(0, 2, 1), + float_3nan_prop_bac = PROPRULE(1, 0, 2), + float_3nan_prop_bca = PROPRULE(1, 2, 0), + float_3nan_prop_cab = PROPRULE(2, 0, 1), + float_3nan_prop_cba = PROPRULE(2, 1, 0), + float_3nan_prop_s_abc = float_3nan_prop_abc | R_3NAN_SNAN_MASK, + float_3nan_prop_s_acb = float_3nan_prop_acb | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bac = float_3nan_prop_bac | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bca = float_3nan_prop_bca | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cab = float_3nan_prop_cab | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cba = float_3nan_prop_cba | R_3NAN_SNAN_MASK, +} Float3NaNPropRule; + +#undef PROPRULE + /* * Rule for result of fused multiply-add 0 * Inf + NaN. * This must be a NaN, but implementations differ on whether this @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + Float3NaNPropRule float_3nan_prop_rule; FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, bool have_snan, float_status *status) { + FloatClass cls[3] = { a_cls, b_cls, c_cls }; + Float3NaNPropRule rule = status->float_3nan_prop_rule; + int which; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } + if (rule == float_3nan_prop_none) { #if defined(TARGET_ARM) - - /* This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. - */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + /* + * This looks different from the ARM ARM pseudocode, because the ARM ARM + * puts the operands to a fused mac operation (a*b)+c in the order c,a,b + */ + rule = float_3nan_prop_s_cab; #elif defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* Prefer sNaN over qNaN, in the a, b, c order. */ - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; + if (snan_bit_is_one(status)) { + rule = float_3nan_prop_s_abc; } else { - return 2; + rule = float_3nan_prop_s_cab; } - } else { - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - } #elif defined(TARGET_LOONGARCH64) - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(c_cls)) { - return 2; - } else { - return 1; - } + /* + * If fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + */ + rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) - /* Prefer SNaN over QNaN, order C, B, A. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } + rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) - /* - * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns - * an input NaN if we have one (ie c). - */ - if (status->use_first_nan) { - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; + if (status->use_first_nan) { + rule = float_3nan_prop_abc; } else { - return 2; + rule = float_3nan_prop_cba; } - } else { - if (is_nan(c_cls)) { - return 2; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - } #else - /* A default implementation: prefer a to b to c. - * This is unlikely to actually match any real implementation. - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_abc; #endif + } + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } + return which; } /*---------------------------------------------------------------------------- -- 2.34.1 Explicitly set a rule in the softfloat tests for propagating NaNs in the muladd case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_3nan_prop_s_cab. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-17-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test.c | 1 + 2 files changed, 2 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-18-peter.maydell@linaro.org --- target/arm/cpu.c | 5 +++++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 3-input NaN propagation prefers SNaN over QNaN, and then + * operand C over A over B (see FPProcessNaNs3() pseudocode, + * but note that for QEMU muladd is a * b + c, whereas for + * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling */ @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_ARM) - /* - * This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b - */ - rule = float_3nan_prop_s_cab; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { rule = float_3nan_prop_s_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for loongarch, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-19-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) * case sets InvalidOp and returns the input value 'c' */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_LOONGARCH64) - rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) /* * If fRA is a NaN return it; otherwise if fRB is a NaN return it; -- 2.34.1 Set the Float3NaNPropRule explicitly for PPC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-20-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 6 ------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * NaN propagation for fused multiply-add: + * if fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + * whereas QEMU labels the operands as (a * b) + c. + */ + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->vec_status); /* * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer * to return an input NaN if we have one (ie c) rather than generating diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_PPC) - /* - * If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) -- 2.34.1 Set the Float3NaNPropRule explicitly for s390x, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-21-peter.maydell@linaro.org --- target/s390x/cpu.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); /* fall through */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_S390X) - rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) -- 2.34.1 Set the Float3NaNPropRule explicitly for SPARC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-22-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For fused-multiply add, prefer SNaN over QNaN, then C->B->A */ + set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_SPARC) - rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-23-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 4 ++++ target/mips/msa.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); FloatInfZeroNaNRule izn_rule; + Float3NaNPropRule nan3_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); + nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; + set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->active_tc.msa_fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, + &env->active_tc.msa_fp_status); + /* clear float_status exception flags */ set_float_exception_flags(0, &env->active_tc.msa_fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - rule = float_3nan_prop_s_abc; - } else { - rule = float_3nan_prop_s_cab; - } -#elif defined(TARGET_XTENSA) +#if defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for xtensa, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-24-peter.maydell@linaro.org --- target/xtensa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 8 -------- 2 files changed, 2 insertions(+), 8 deletions(-) diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); + set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, + &env->fp_status); } void HELPER(wur_fpu2k_fcr)(CPUXtensaState *env, uint32_t v) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_XTENSA) - if (status->use_first_nan) { - rule = float_3nan_prop_abc; - } else { - rule = float_3nan_prop_cba; - } -#else rule = float_3nan_prop_abc; -#endif } assert(rule != float_3nan_prop_none); -- 2.34.1 Set the Float3NaNPropRule explicitly for i386. We had no i386-specific behaviour in the old ifdef ladder, so we were using the default "prefer a then b then c" fallback; this is actually the correct per-the-spec handling for i386. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-25-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) * there are multiple input NaNs they are selected in the order a, b, c. */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) -- 2.34.1 Set the Float3NaNPropRule explicitly for HPPA, and remove the ifdef from pickNaNMulAdd(). HPPA is the only target that was using the default branch of the ifdef ladder (other targets either do not use muladd or set default_nan_mode), so we can remove the ifdef fallback entirely now (allowing the "rule not set" case to fall into the default of the switch statement and assert). We add a TODO note that the HPPA rule is probably wrong; this is not a behavioural change for this refactoring. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-26-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * TODO: The HPPA architecture reference only documents its NaN + * propagation rule for 2-operand operations. Testing on real hardware + * might be necessary to confirm whether this order for muladd is correct. + * Not preferring the SNaN is almost certainly incorrect as it diverges + * from the documented rules for 2-operand operations. + */ + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } - if (rule == float_3nan_prop_none) { - rule = float_3nan_prop_abc; - } - assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ -- 2.34.1 The use_first_nan field in float_status was an xtensa-specific way to select at runtime from two different NaN propagation rules. Now that xtensa is using the target-agnostic NaN propagation rule selection that we've just added, we can remove use_first_nan, because there is no longer any code that reads it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-27-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 5 ----- include/fpu/softfloat-types.h | 1 - target/xtensa/fpu_helper.c | 1 - 3 files changed, 7 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_snan_bit_is_one(bool val, float_status *status) status->snan_bit_is_one = val; } -static inline void set_use_first_nan(bool val, float_status *status) -{ - status->use_first_nan = val; -} - static inline void set_no_signaling_nans(bool val, float_status *status) { status->no_signaling_nans = val; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { * softfloat-specialize.inc.c) */ bool snan_bit_is_one; - bool use_first_nan; bool no_signaling_nans; /* should overflowed results subtract re_bias to its exponent? */ bool rebias_overflow; diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ static const struct { void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) { - set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, -- 2.34.1 Currently m68k_cpu_reset_hold() calls floatx80_default_nan(NULL) to get the NaN bit pattern to reset the FPU registers. This works because it happens that our implementation of floatx80_default_nan() doesn't actually look at the float_status pointer except for TARGET_MIPS. However, this isn't guaranteed, and to be able to remove the ifdef in floatx80_default_nan() we're going to need a real float_status here. Rearrange m68k_cpu_reset_hold() so that we initialize env->fp_status earlier, and thus can pass it to floatx80_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-28-peter.maydell@linaro.org --- target/m68k/cpu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); CPUM68KState *env = cpu_env(cs); - floatx80 nan = floatx80_default_nan(NULL); + floatx80 nan; int i; if (mcc->parent_phases.hold) { @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) #else cpu_m68k_set_sr(env, SR_S | SR_I); #endif - for (i = 0; i < 8; i++) { - env->fregs[i].d = nan; - } - cpu_m68k_set_fpcr(env, 0); /* * M68000 FAMILY PROGRAMMER'S REFERENCE MANUAL * 3.4 FLOATING-POINT INSTRUCTION DETAILS @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + + nan = floatx80_default_nan(&env->fp_status); + for (i = 0; i < 8; i++) { + env->fregs[i].d = nan; + } + cpu_m68k_set_fpcr(env, 0); env->fpsr = 0; /* TODO: We should set PC from the interrupt vector. */ -- 2.34.1 We create our 128-bit default NaN by calling parts64_default_nan() and then adjusting the result. We can do the same trick for creating the floatx80 default NaN, which lets us drop a target ifdef. floatx80 is used only by: i386 m68k arm nwfpe old floating-point emulation emulation support (which is essentially dead, especially the parts involving floatx80) PPC (only in the xsrqpxp instruction, which just rounds an input value by converting to floatx80 and back, so will never generate the default NaN) The floatx80 default NaN as currently implemented is: m68k: sign = 0, exp = 1...1, int = 1, frac = 1....1 i386: sign = 1, exp = 1...1, int = 1, frac = 10...0 These are the same as the parts64_default_nan for these architectures. This is technically a possible behaviour change for arm linux-user nwfpe emulation emulation, because the default NaN will now have the sign bit clear. But we were already generating a different floatx80 default NaN from the real kernel emulation we are supposedly following, which appears to use an all-bits-1 value: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L267 This won't affect the only "real" use of the nwfpe emulation, which is ancient binaries that used it as part of the old floating point calling convention; that only uses loads and stores of 32 and 64 bit floats, not any of the floatx80 behaviour the original hardware had. We also get the nwfpe float64 default NaN value wrong: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L166 so if we ever cared about this obscure corner the right fix would be to correct that so nwfpe used its own default-NaN setting rather than the Arm VFP one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-29-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts128_silence_nan(FloatParts128 *p, float_status *status) floatx80 floatx80_default_nan(float_status *status) { floatx80 r; + /* + * Extrapolate from the choices made by parts64_default_nan to fill + * in the floatx80 format. We assume that floatx80's explicit + * integer bit is always set (this is true for i386 and m68k, + * which are the only real users of this format). + */ + FloatParts64 p64; + parts64_default_nan(&p64, status); - /* None of the targets that have snan_bit_is_one use floatx80. */ - assert(!snan_bit_is_one(status)); -#if defined(TARGET_M68K) - r.low = UINT64_C(0xFFFFFFFFFFFFFFFF); - r.high = 0x7FFF; -#else - /* X86 */ - r.low = UINT64_C(0xC000000000000000); - r.high = 0xFFFF; -#endif + r.high = 0x7FFF | (p64.sign << 15); + r.low = (1ULL << DECOMPOSED_BINARY_POINT) | p64.frac; return r; } -- 2.34.1 In target/loongarch's helper_fclass_s() and helper_fclass_d() we pass a zero-initialized float_status struct to float32_is_quiet_nan() and float64_is_quiet_nan(), with the cryptic comment "for snan_bit_is_one". This pattern appears to have been copied from target/riscv, where it is used because the functions there do not have ready access to the CPU state struct. The comment presumably refers to the fact that the main reason the is_quiet_nan() functions want the float_state is because they want to know about the snan_bit_is_one config. In the loongarch helpers, though, we have the CPU state struct to hand. Use the usual env->fp_status here. This avoids our needing to track that we need to update the initializer of the local float_status structs when the core softfloat code adds new options for targets to configure their behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-30-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_s(CPULoongArchState *env, uint64_t fj) } else if (float32_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float32_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float32_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float32_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_d(CPULoongArchState *env, uint64_t fj) } else if (float64_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float64_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float64_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float64_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } -- 2.34.1 In the frem helper, we have a local float_status because we want to execute the floatx80_div() with a custom rounding mode. Instead of zero-initializing the local float_status and then having to set it up with the m68k standard behaviour (including the NaN propagation rule and copying the rounding precision from env->fp_status), initialize it as a complete copy of env->fp_status. This will avoid our having to add new code in this function for every new config knob we add to fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-31-peter.maydell@linaro.org --- target/m68k/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/m68k/fpu_helper.c b/target/m68k/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/fpu_helper.c +++ b/target/m68k/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(frem)(CPUM68KState *env, FPReg *res, FPReg *val0, FPReg *val1) fp_rem = floatx80_rem(val1->d, val0->d, &env->fp_status); if (!floatx80_is_any_nan(fp_rem)) { - float_status fp_status = { }; + /* Use local temporary fp_status to set different rounding mode */ + float_status fp_status = env->fp_status; uint32_t quotient; int sign; /* Calculate quotient directly using round to nearest mode */ - set_float_2nan_prop_rule(float_2nan_prop_ab, &fp_status); set_float_rounding_mode(float_round_nearest_even, &fp_status); - set_floatx80_rounding_precision( - get_floatx80_rounding_precision(&env->fp_status), &fp_status); fp_quot.d = floatx80_div(val1->d, val0->d, &fp_status); sign = extractFloatx80Sign(fp_quot.d); -- 2.34.1 In cf_fpu_gdb_get_reg() and cf_fpu_gdb_set_reg() we do the conversion from float64 to floatx80 using a scratch float_status, because we don't want the conversion to affect the CPU's floating point exception status. Currently we use a zero-initialized float_status. This will get steadily more awkward as we add config knobs to float_status that the target must initialize. Avoid having to add any of that configuration here by instead initializing our local float_status from the env->fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-32-peter.maydell@linaro.org --- target/m68k/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/m68k/helper.c b/target/m68k/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/helper.c +++ b/target/m68k/helper.c @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_get_reg(CPUState *cs, GByteArray *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; return gdb_get_reg64(mem_buf, floatx80_to_float64(env->fregs[n].d, &s)); } switch (n) { @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_set_reg(CPUState *cs, uint8_t *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; env->fregs[n].d = float64_to_floatx80(ldq_be_p(mem_buf), &s); return 8; } -- 2.34.1 In the helper functions flcmps and flcmpd we use a scratch float_status so that we don't change the CPU state if the comparison raises any floating point exception flags. Instead of zero-initializing this scratch float_status, initialize it as a copy of env->fp_status. This avoids the need to explicitly initialize settings like the NaN propagation rule or others we might add to softfloat in future. To do this we need to pass the CPU env pointer in to the helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-33-peter.maydell@linaro.org --- target/sparc/helper.h | 4 ++-- target/sparc/fop_helper.c | 8 ++++---- target/sparc/translate.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/target/sparc/helper.h b/target/sparc/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/helper.h +++ b/target/sparc/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(fcmpd, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmped, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmpq, TCG_CALL_NO_WG, i32, env, i128, i128) DEF_HELPER_FLAGS_3(fcmpeq, TCG_CALL_NO_WG, i32, env, i128, i128) -DEF_HELPER_FLAGS_2(flcmps, TCG_CALL_NO_RWG_SE, i32, f32, f32) -DEF_HELPER_FLAGS_2(flcmpd, TCG_CALL_NO_RWG_SE, i32, f64, f64) +DEF_HELPER_FLAGS_3(flcmps, TCG_CALL_NO_RWG_SE, i32, env, f32, f32) +DEF_HELPER_FLAGS_3(flcmpd, TCG_CALL_NO_RWG_SE, i32, env, f64, f64) DEF_HELPER_2(raise_exception, noreturn, env, int) DEF_HELPER_FLAGS_3(faddd, TCG_CALL_NO_WG, f64, env, f64, f64) diff --git a/target/sparc/fop_helper.c b/target/sparc/fop_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/fop_helper.c +++ b/target/sparc/fop_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t helper_fcmpeq(CPUSPARCState *env, Int128 src1, Int128 src2) return finish_fcmp(env, r, GETPC()); } -uint32_t helper_flcmps(float32 src1, float32 src2) +uint32_t helper_flcmps(CPUSPARCState *env, float32 src1, float32 src2) { /* * FLCMP never raises an exception nor modifies any FSR fields. * Perform the comparison with a dummy fp environment. */ - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); @@ -XXX,XX +XXX,XX @@ uint32_t helper_flcmps(float32 src1, float32 src2) g_assert_not_reached(); } -uint32_t helper_flcmpd(float64 src1, float64 src2) +uint32_t helper_flcmpd(CPUSPARCState *env, float64 src1, float64 src2) { - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); diff --git a/target/sparc/translate.c b/target/sparc/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/translate.c +++ b/target/sparc/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPs(DisasContext *dc, arg_FLCMPs *a) src1 = gen_load_fpr_F(dc, a->rs1); src2 = gen_load_fpr_F(dc, a->rs2); - gen_helper_flcmps(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmps(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPd(DisasContext *dc, arg_FLCMPd *a) src1 = gen_load_fpr_D(dc, a->rs1); src2 = gen_load_fpr_D(dc, a->rs2); - gen_helper_flcmpd(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmpd(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } -- 2.34.1 In the helper_compute_fprf functions, we pass a dummy float_status in to the is_signaling_nan() function. This is unnecessary, because we have convenient access to the CPU env pointer here and that is already set up with the correct values for the snan_bit_is_one and no_signaling_nans config settings. is_signaling_nan() doesn't ever update the fp_status with any exception flags, so there is no reason not to use env->fp_status here. Use env->fp_status instead of the dummy fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-34-peter.maydell@linaro.org --- target/ppc/fpu_helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/ppc/fpu_helper.c b/target/ppc/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/fpu_helper.c +++ b/target/ppc/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void helper_compute_fprf_##tp(CPUPPCState *env, tp arg) \ } else if (tp##_is_infinity(arg)) { \ fprf = neg ? 0x09 << FPSCR_FPRF : 0x05 << FPSCR_FPRF; \ } else { \ - float_status dummy = { }; /* snan_bit_is_one = 0 */ \ - if (tp##_is_signaling_nan(arg, &dummy)) { \ + if (tp##_is_signaling_nan(arg, &env->fp_status)) { \ fprf = 0x00 << FPSCR_FPRF; \ } else { \ fprf = 0x11 << FPSCR_FPRF; \ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Now that float_status has a bunch of fp parameters, it is easier to copy an existing structure than create one from scratch. Begin by copying the structure that corresponds to the FPSR and make only the adjustments required for BFloat16 semantics. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/vec_helper.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vec_helper.c +++ b/target/arm/tcg/vec_helper.c @@ -XXX,XX +XXX,XX @@ bool is_ebf(CPUARMState *env, float_status *statusp, float_status *oddstatusp) * no effect on AArch32 instructions. */ bool ebf = is_a64(env) && env->vfp.fpcr & FPCR_EBF; - *statusp = (float_status){ - .tininess_before_rounding = float_tininess_before_rounding, - .float_rounding_mode = float_round_to_odd_inf, - .flush_to_zero = true, - .flush_inputs_to_zero = true, - .default_nan_mode = true, - }; + + *statusp = env->vfp.fp_status; + set_default_nan_mode(true, statusp); if (ebf) { - float_status *fpst = &env->vfp.fp_status; - set_flush_to_zero(get_flush_to_zero(fpst), statusp); - set_flush_inputs_to_zero(get_flush_inputs_to_zero(fpst), statusp); - set_float_rounding_mode(get_float_rounding_mode(fpst), statusp); - /* EBF=1 needs to do a step with round-to-odd semantics */ *oddstatusp = *statusp; set_float_rounding_mode(float_round_to_odd, oddstatusp); + } else { + set_flush_to_zero(true, statusp); + set_flush_inputs_to_zero(true, statusp); + set_float_rounding_mode(float_round_to_odd_inf, statusp); } - return ebf; } -- 2.34.1 Currently we hardcode the default NaN value in parts64_default_nan() using a compile-time ifdef ladder. This is awkward for two cases: * for single-QEMU-binary we can't hard-code target-specifics like this * for Arm FEAT_AFP the default NaN value depends on FPCR.AH (specifically the sign bit is different) Add a field to float_status to specify the default NaN value; fall back to the old ifdef behaviour if these are not set. The default NaN value is specified by setting a uint8_t to a pattern corresponding to the sign and upper fraction parts of the NaN; the lower bits of the fraction are set from bit 0 of the pattern. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-35-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++++++ include/fpu/softfloat-types.h | 10 ++++++ fpu/softfloat-specialize.c.inc | 55 ++++++++++++++++++++------------- 3 files changed, 54 insertions(+), 22 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, status->float_infzeronan_rule = rule; } +static inline void set_float_default_nan_pattern(uint8_t dnan_pattern, + float_status *status) +{ + status->default_nan_pattern = dnan_pattern; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status return status->float_infzeronan_rule; } +static inline uint8_t get_float_default_nan_pattern(float_status *status) +{ + return status->default_nan_pattern; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { /* should denormalised inputs go to zero and set the input_denormal flag? */ bool flush_inputs_to_zero; bool default_nan_mode; + /* + * The pattern to use for the default NaN. Here the high bit specifies + * the default NaN's sign bit, and bits 6..0 specify the high bits of the + * fractional part. The low bits of the fractional part are copies of bit 0. + * The exponent of the default NaN is (as for any NaN) always all 1s. + * Note that a value of 0 here is not a valid NaN. The target must set + * this to the correct non-zero value, or we will assert when trying to + * create a default NaN. + */ + uint8_t default_nan_pattern; /* * The flags below are not used on all specializations and may * constant fold away (see snan_bit_is_one()/no_signalling_nans() in diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) { bool sign = 0; uint64_t frac; + uint8_t dnan_pattern = status->default_nan_pattern; + if (dnan_pattern == 0) { #if defined(TARGET_SPARC) || defined(TARGET_M68K) - /* !snan_bit_is_one, set all bits */ - frac = (1ULL << DECOMPOSED_BINARY_POINT) - 1; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ + /* Sign bit clear, all frac bits set */ + dnan_pattern = 0b01111111; +#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ || defined(TARGET_MICROBLAZE) - /* !snan_bit_is_one, set sign and msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - sign = 1; + /* Sign bit set, most significant frac bit set */ + dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) - /* snan_bit_is_one, set msb-1. */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 2); + /* Sign bit clear, msb-1 frac bit set */ + dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) - sign = 1; - frac = ~0ULL; + /* Sign bit set, all frac bits set. */ + dnan_pattern = 0b11111111; #else - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* set all bits other than msb */ - frac = (1ULL << (DECOMPOSED_BINARY_POINT - 1)) - 1; - } else { - /* set msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - } + /* + * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, + * S390, SH4, TriCore, and Xtensa. Our other supported targets + * do not have floating-point. + */ + if (snan_bit_is_one(status)) { + /* sign bit clear, set all frac bits other than msb */ + dnan_pattern = 0b00111111; + } else { + /* sign bit clear, set frac msb */ + dnan_pattern = 0b01000000; + } #endif + } + assert(dnan_pattern != 0); + + sign = dnan_pattern >> 7; + /* + * Place default_nan_pattern [6:0] into bits [62:56], + * and replecate bit [0] down into [55:0] + */ + frac = deposit64(0, DECOMPOSED_BINARY_POINT - 7, 7, dnan_pattern); + frac = deposit64(frac, 0, DECOMPOSED_BINARY_POINT - 7, -(dnan_pattern & 1)); *p = (FloatParts64) { .cls = float_class_qnan, -- 2.34.1 Set the default NaN pattern explicitly for the tests/fp code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-36-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 1 + 3 files changed, 3 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); + set_float_default_nan_pattern(0b01000000, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test-log2.c b/tests/fp/fp-test-log2.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test-log2.c +++ b/tests/fp/fp-test-log2.c @@ -XXX,XX +XXX,XX @@ int main(int ac, char **av) int i; set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_rounding_mode(float_round_nearest_even, &qsf); test.d = 0.0; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-37-peter.maydell@linaro.org --- target/microblaze/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj, ResetType type) * this architecture. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) /* start in user mode with interrupts enabled. */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ - || defined(TARGET_MICROBLAZE) +#elif defined(TARGET_I386) || defined(TARGET_X86_64) /* Sign bit set, most significant frac bit set */ dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-38-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 4 ++++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); + set_float_default_nan_pattern(0b11000000, &env->mmx_status); + set_float_default_nan_pattern(0b11000000, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) - /* Sign bit set, most significant frac bit set */ - dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) /* Sign bit clear, msb-1 frac bit set */ dnan_pattern = 0b00100000; -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-39-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN: sign bit clear, msb-1 frac bit set */ + set_float_default_nan_pattern(0b00100000, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_HPPA) - /* Sign bit clear, msb-1 frac bit set */ - dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; -- 2.34.1 Set the default NaN pattern explicitly for the alpha target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-40-peter.maydell@linaro.org --- target/alpha/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/alpha/cpu.c b/target/alpha/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/alpha/cpu.c +++ b/target/alpha/cpu.c @@ -XXX,XX +XXX,XX @@ static void alpha_cpu_initfn(Object *obj) * operand in Fa. That is float_2nan_prop_ba. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) env->flags = ENV_FLAG_PS_USER | ENV_FLAG_FEN; cpu_alpha_store_fpcr(env, (uint64_t)(FPCR_INVD | FPCR_DZED | FPCR_OVFD -- 2.34.1 Set the default NaN pattern explicitly for the arm target. This includes setting it for the old linux-user nwfpe emulation. For nwfpe, our default doesn't match the real kernel, but we avoid making a behaviour change in this commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-41-peter.maydell@linaro.org --- linux-user/arm/nwfpe/fpa11.c | 5 +++++ target/arm/cpu.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/linux-user/arm/nwfpe/fpa11.c b/linux-user/arm/nwfpe/fpa11.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/nwfpe/fpa11.c +++ b/linux-user/arm/nwfpe/fpa11.c @@ -XXX,XX +XXX,XX @@ void resetFPA11(void) * this late date. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &fpa11->fp_status); + /* + * Use the same default NaN value as Arm VFP. This doesn't match + * the Linux kernel's nwfpe emulation, which uses an all-1s value. + */ + set_float_default_nan_pattern(0b01000000, &fpa11->fp_status); } void SetRoundingMode(const unsigned int opcode) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling + * * Default NaN has sign bit clear, msb frac bit set */ static void arm_set_default_fp_behaviours(float_status *s) { @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); + set_float_default_nan_pattern(0b01000000, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) -- 2.34.1 Set the default NaN pattern explicitly for loongarch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-42-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) -- 2.34.1 Set the default NaN pattern explicitly for m68k. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-43-peter.maydell@linaro.org --- target/m68k/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + /* Default NaN: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); nan = floatx80_default_nan(&env->fp_status); for (i = 0; i < 8; i++) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) || defined(TARGET_M68K) +#if defined(TARGET_SPARC) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; #elif defined(TARGET_HEXAGON) -- 2.34.1 Set the default NaN pattern explicitly for MIPS. Note that this is our only target which currently changes the default NaN at runtime (which it was previously doing indirectly when it changed the snan_bit_is_one setting). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-44-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 7 +++++++ target/mips/msa.c | 3 +++ 2 files changed, 10 insertions(+) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + /* + * With nan2008, the default NaN value has the sign bit clear and the + * frac msb set; with the older mode, the sign bit is clear, and all + * frac bits except the msb are set. + */ + set_float_default_nan_pattern(nan2008 ? 0b01000000 : 0b00111111, + &env->active_fpu.fp_status); } diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* Inf * 0 + NaN returns the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->active_tc.msa_fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, + &env->active_tc.msa_fp_status); } -- 2.34.1 Set the default NaN pattern explicitly for openrisc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-45-peter.maydell@linaro.org --- target/openrisc/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &cpu->env.fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &cpu->env.fp_status); #ifndef CONFIG_USER_ONLY cpu->env.picmr = 0x00000000; -- 2.34.1 Set the default NaN pattern explicitly for ppc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-46-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); + /* Default NaN: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); + set_float_default_nan_pattern(0b01000000, &env->vec_status); + for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; -- 2.34.1 Set the default NaN pattern explicitly for sh4. Note that sh4 is one of the only three targets (the others being HPPA and sometimes MIPS) that has snan_bit_is_one set. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-47-peter.maydell@linaro.org --- target/sh4/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static void superh_cpu_reset_hold(Object *obj, ResetType type) set_flush_to_zero(1, &env->fp_status); #endif set_default_nan_mode(1, &env->fp_status); + /* sign bit clear, set all frac bits other than msb */ + set_float_default_nan_pattern(0b00111111, &env->fp_status); } static void superh_cpu_disas_set_info(CPUState *cpu, disassemble_info *info) -- 2.34.1 Set the default NaN pattern explicitly for rx. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-48-peter.maydell@linaro.org --- target/rx/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj, ResetType type) * then prefer dest over source", which is float_2nan_prop_s_ab. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } static ObjectClass *rx_cpu_class_by_name(const char *cpu_model) -- 2.34.1 Set the default NaN pattern explicitly for s390x. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-49-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; -- 2.34.1 Set the default NaN pattern explicitly for SPARC, and remove the ifdef from parts64_default_nan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-50-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 +---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN value: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) - /* Sign bit clear, all frac bits set */ - dnan_pattern = 0b01111111; -#elif defined(TARGET_HEXAGON) +#if defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; #else -- 2.34.1 Set the default NaN pattern explicitly for xtensa. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-51-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } -- 2.34.1 Set the default NaN pattern explicitly for hexagon. Remove the ifdef from parts64_default_nan(); the only remaining unconverted targets all use the default case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-52-peter.maydell@linaro.org --- target/hexagon/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 ----- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_cpu_reset_hold(Object *obj, ResetType type) set_default_nan_mode(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); + /* Default NaN value: sign bit set, all frac bits set */ + set_float_default_nan_pattern(0b11111111, &env->fp_status); } static void hexagon_cpu_disas_set_info(CPUState *s, disassemble_info *info) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_HEXAGON) - /* Sign bit set, all frac bits set. */ - dnan_pattern = 0b11111111; -#else /* * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, * S390, SH4, TriCore, and Xtensa. Our other supported targets @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) /* sign bit clear, set frac msb */ dnan_pattern = 0b01000000; } -#endif } assert(dnan_pattern != 0); -- 2.34.1 Set the default NaN pattern explicitly for riscv. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-53-peter.maydell@linaro.org --- target/riscv/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) cs->exception_index = RISCV_EXCP_NONE; env->load_res = -1; set_default_nan_mode(1, &env->fp_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); env->vill = true; #ifndef CONFIG_USER_ONLY -- 2.34.1 Set the default NaN pattern explicitly for tricore. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-54-peter.maydell@linaro.org --- target/tricore/helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/tricore/helper.c b/target/tricore/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/helper.c +++ b/target/tricore/helper.c @@ -XXX,XX +XXX,XX @@ void fpu_set_state(CPUTriCoreState *env) set_flush_to_zero(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); set_default_nan_mode(1, &env->fp_status); + /* Default NaN pattern: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } uint32_t psw_read(CPUTriCoreState *env) -- 2.34.1 Now that all our targets have bene converted to explicitly specify their pattern for the default NaN value we can remove the remaining fallback code in parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-55-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint64_t frac; uint8_t dnan_pattern = status->default_nan_pattern; - if (dnan_pattern == 0) { - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* sign bit clear, set all frac bits other than msb */ - dnan_pattern = 0b00111111; - } else { - /* sign bit clear, set frac msb */ - dnan_pattern = 0b01000000; - } - } assert(dnan_pattern != 0); sign = dnan_pattern >> 7; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaNMulAdd into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-3-richard.henderson@linaro.org [PMM: keep comment from old code in new location] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 41 +++++++++++++++++++++++++- fpu/softfloat-specialize.c.inc | 54 ---------------------------------- 2 files changed, 40 insertions(+), 55 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } if (s->default_nan_mode) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ which = 3; + } else if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the + * default NaN here, and some return the input NaN. + */ + switch (s->float_infzeronan_rule) { + case float_infzeronan_dnan_never: + which = 2; + break; + case float_infzeronan_dnan_always: + which = 3; + break; + case float_infzeronan_dnan_if_qnan: + which = is_qnan(c->cls) ? 3 : 2; + break; + default: + g_assert_not_reached(); + } } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); + FloatClass cls[3] = { a->cls, b->cls, c->cls }; + Float3NaNPropRule rule = s->float_3nan_prop_rule; + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a three-input operation. -| For the moment we assume that no CPU needs the 'larger significand' -| information. -| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN -*----------------------------------------------------------------------------*/ -static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, bool have_snan, float_status *status) -{ - FloatClass cls[3] = { a_cls, b_cls, c_cls }; - Float3NaNPropRule rule = status->float_3nan_prop_rule; - int which; - - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify. - */ - assert(!status->default_nan_mode); - - if (infzero) { - /* - * Inf * 0 + NaN -- some implementations return the default NaN here, - * and some return the input NaN. - */ - switch (status->float_infzeronan_rule) { - case float_infzeronan_dnan_never: - return 2; - case float_infzeronan_dnan_always: - return 3; - case float_infzeronan_dnan_if_qnan: - return is_qnan(c_cls) ? 3 : 2; - default: - g_assert_not_reached(); - } - } - - assert(rule != float_3nan_prop_none); - if (have_snan && (rule & R_3NAN_SNAN_MASK)) { - /* We have at least one SNaN input and should prefer it */ - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); - } else { - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); - } - return which; -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remove "3" as a special case for which and simply branch to return the desired value. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, * But if we're not in default-NaN mode then the target must * specify. */ - which = 3; + goto default_nan; } else if (infzero) { /* * Inf * 0 + NaN -- some implementations return the @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, */ switch (s->float_infzeronan_rule) { case float_infzeronan_dnan_never: - which = 2; break; case float_infzeronan_dnan_always: - which = 3; - break; + goto default_nan; case float_infzeronan_dnan_if_qnan: - which = is_qnan(c->cls) ? 3 : 2; + if (is_qnan(c->cls)) { + goto default_nan; + } break; default: g_assert_not_reached(); } + which = 2; } else { FloatClass cls[3] = { a->cls, b->cls, c->cls }; Float3NaNPropRule rule = s->float_3nan_prop_rule; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } } - if (which == 3) { - parts_default_nan(a, s); - return a; - } - switch (which) { case 0: break; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, parts_silence_nan(a, s); } return a; + + default_nan: + parts_default_nan(a, s); + return a; } /* -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Assign the pointer return value to 'a' directly, rather than going through an intermediary index. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, FloatPartsN *c, float_status *s, int ab_mask, int abc_mask) { - int which; bool infzero = (ab_mask == float_cmask_infzero); bool have_snan = (abc_mask & float_cmask_snan); + FloatPartsN *ret; if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, default: g_assert_not_reached(); } - which = 2; + ret = c; } else { - FloatClass cls[3] = { a->cls, b->cls, c->cls }; + FloatPartsN *val[3] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); + } while (!is_snan(ret->cls)); } else { do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); + } while (!is_nan(ret->cls)); } } - switch (which) { - case 0: - break; - case 1: - a = b; - break; - case 2: - a = c; - break; - default: - g_assert_not_reached(); + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; default_nan: parts_default_nan(a, s); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> While all indices into val[] should be in [0-2], the mask applied is two bits. To help static analysis see there is no possibility of read beyond the end of the array, pad the array to 4 entries, with the final being (implicitly) NULL. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } ret = c; } else { - FloatPartsN *val[3] = { a, b, c }; + FloatPartsN *val[R_3NAN_1ST_MASK + 1] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This function is part of the public interface and is not "specialized" to any target in any way. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 52 ++++++++++++++++++++++++++++++++++ fpu/softfloat-specialize.c.inc | 52 ---------------------------------- 2 files changed, 52 insertions(+), 52 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, *zExpPtr = 1 - shiftCount; } +/*---------------------------------------------------------------------------- +| Takes two extended double-precision floating-point values `a' and `b', one +| of which is a NaN, and returns the appropriate NaN result. If either `a' or +| `b' is a signaling NaN, the invalid exception is raised. +*----------------------------------------------------------------------------*/ + +floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) +{ + bool aIsLargerSignificand; + FloatClass a_cls, b_cls; + + /* This is not complete, but is good enough for pickNaN. */ + a_cls = (!floatx80_is_any_nan(a) + ? float_class_normal + : floatx80_is_signaling_nan(a, status) + ? float_class_snan + : float_class_qnan); + b_cls = (!floatx80_is_any_nan(b) + ? float_class_normal + : floatx80_is_signaling_nan(b, status) + ? float_class_snan + : float_class_qnan); + + if (is_snan(a_cls) || is_snan(b_cls)) { + float_raise(float_flag_invalid, status); + } + + if (status->default_nan_mode) { + return floatx80_default_nan(status); + } + + if (a.low < b.low) { + aIsLargerSignificand = 0; + } else if (b.low < a.low) { + aIsLargerSignificand = 1; + } else { + aIsLargerSignificand = (a.high < b.high) ? 1 : 0; + } + + if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { + if (is_snan(b_cls)) { + return floatx80_silence_nan(b, status); + } + return b; + } else { + if (is_snan(a_cls)) { + return floatx80_silence_nan(a, status); + } + return a; + } +} + /*---------------------------------------------------------------------------- | Takes an abstract floating-point value having sign `zSign', exponent `zExp', | and extended significand formed by the concatenation of `zSig0' and `zSig1', diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ floatx80 floatx80_silence_nan(floatx80 a, float_status *status) return a; } -/*---------------------------------------------------------------------------- -| Takes two extended double-precision floating-point values `a' and `b', one -| of which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) -{ - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; - - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { - return floatx80_default_nan(status); - } - - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the quadruple-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Unpacking and repacking the parts may be slightly more work than we did before, but we get to reuse more code. For a code path handling exceptional values, this is an improvement. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241203203949.483774-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 43 +++++-------------------------------------- 1 file changed, 5 insertions(+), 38 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) { - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; + FloatParts128 pa, pb, *pr; - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { + if (!floatx80_unpack_canonical(&pa, a, status) || + !floatx80_unpack_canonical(&pb, b, status)) { return floatx80_default_nan(status); } - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } + pr = parts_pick_nan(&pa, &pb, status); + return floatx80_round_pack_canonical(pr, status); } /*---------------------------------------------------------------------------- -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaN into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 82 +++++++++++++++++++++++++---- fpu/softfloat-specialize.c.inc | 96 ---------------------------------- 2 files changed, 73 insertions(+), 105 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + int cmp, which; + if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } if (s->default_nan_mode) { parts_default_nan(a, s); - } else { - int cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } + return a; + } - if (pickNaN(a->cls, b->cls, cmp > 0, s)) { - a = b; - } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + + switch (s->float_2nan_prop_rule) { + case float_2nan_prop_s_ab: if (is_snan(a->cls)) { - parts_silence_nan(a, s); + which = 0; + } else if (is_snan(b->cls)) { + which = 1; + } else if (is_qnan(a->cls)) { + which = 0; + } else { + which = 1; } + break; + case float_2nan_prop_s_ba: + if (is_snan(b->cls)) { + which = 1; + } else if (is_snan(a->cls)) { + which = 0; + } else if (is_qnan(b->cls)) { + which = 1; + } else { + which = 0; + } + break; + case float_2nan_prop_ab: + which = is_nan(a->cls) ? 0 : 1; + break; + case float_2nan_prop_ba: + which = is_nan(b->cls) ? 1 : 0; + break; + case float_2nan_prop_x87: + /* + * This implements x87 NaN propagation rules: + * SNaN + QNaN => return the QNaN + * two SNaNs => return the one with the larger significand, silenced + * two QNaNs => return the one with the larger significand + * SNaN and a non-NaN => return the SNaN, silenced + * QNaN and a non-NaN => return the QNaN + * + * If we get down to comparing significands and they are the same, + * return the NaN with the positive sign bit (if any). + */ + if (is_snan(a->cls)) { + if (is_snan(b->cls)) { + which = cmp > 0 ? 0 : 1; + } else { + which = is_qnan(b->cls) ? 1 : 0; + } + } else if (is_qnan(a->cls)) { + if (is_snan(b->cls) || !is_qnan(b->cls)) { + which = 0; + } else { + which = cmp > 0 ? 0 : 1; + } + } else { + which = 1; + } + break; + default: + g_assert_not_reached(); + } + + if (which) { + a = b; + } + if (is_snan(a->cls)) { + parts_silence_nan(a, s); } return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ bool float32_is_signaling_nan(float32 a_, float_status *status) } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a two-input operation. -| IEEE754 doesn't specify all the details of this, so the -| algorithm is target-specific. -| The routine is passed various bits of information about the -| two NaNs and should return 0 to select NaN a and 1 for NaN b. -| Note that signalling NaNs are always squashed to quiet NaNs -| by the caller, by calling floatXX_silence_nan() before -| returning them. -| -| aIsLargerSignificand is only valid if both a and b are NaNs -| of some kind, and is true if a has the larger significand, -| or if both a and b have the same significand but a is -| positive but b is negative. It is only needed for the x87 -| tie-break rule. -*----------------------------------------------------------------------------*/ - -static int pickNaN(FloatClass a_cls, FloatClass b_cls, - bool aIsLargerSignificand, float_status *status) -{ - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify via set_float_2nan_prop_rule(). - */ - assert(!status->default_nan_mode); - - switch (status->float_2nan_prop_rule) { - case float_2nan_prop_s_ab: - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_s_ba: - if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_ab: - if (is_nan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_ba: - if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_x87: - /* - * This implements x87 NaN propagation rules: - * SNaN + QNaN => return the QNaN - * two SNaNs => return the one with the larger significand, silenced - * two QNaNs => return the one with the larger significand - * SNaN and a non-NaN => return the SNaN, silenced - * QNaN and a non-NaN => return the QNaN - * - * If we get down to comparing significands and they are the same, - * return the NaN with the positive sign bit (if any). - */ - if (is_snan(a_cls)) { - if (is_snan(b_cls)) { - return aIsLargerSignificand ? 0 : 1; - } - return is_qnan(b_cls) ? 1 : 0; - } else if (is_qnan(a_cls)) { - if (is_snan(b_cls) || !is_qnan(b_cls)) { - return 0; - } else { - return aIsLargerSignificand ? 0 : 1; - } - } else { - return 1; - } - default: - g_assert_not_reached(); - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remember if there was an SNaN, and use that to simplify float_2nan_prop_s_{ab,ba} to only the snan component. Then, fall through to the corresponding float_2nan_prop_{ab,ba} case to handle any remaining nans, which must be quiet. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + bool have_snan = false; int cmp, which; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); + have_snan = true; } if (s->default_nan_mode) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: - if (is_snan(a->cls)) { - which = 0; - } else if (is_snan(b->cls)) { - which = 1; - } else if (is_qnan(a->cls)) { - which = 0; - } else { - which = 1; + if (have_snan) { + which = is_snan(a->cls) ? 0 : 1; + break; } - break; - case float_2nan_prop_s_ba: - if (is_snan(b->cls)) { - which = 1; - } else if (is_snan(a->cls)) { - which = 0; - } else if (is_qnan(b->cls)) { - which = 1; - } else { - which = 0; - } - break; + /* fall through */ case float_2nan_prop_ab: which = is_nan(a->cls) ? 0 : 1; break; + case float_2nan_prop_s_ba: + if (have_snan) { + which = is_snan(b->cls) ? 1 : 0; + break; + } + /* fall through */ case float_2nan_prop_ba: which = is_nan(b->cls) ? 1 : 0; break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Move the fractional comparison to the end of the float_2nan_prop_x87 case. This is not required for any other 2nan propagation rule. Reorganize the x87 case itself to break out of the switch when the fractional comparison is not required. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, return a; } - cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } - switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, * return the NaN with the positive sign bit (if any). */ if (is_snan(a->cls)) { - if (is_snan(b->cls)) { - which = cmp > 0 ? 0 : 1; - } else { + if (!is_snan(b->cls)) { which = is_qnan(b->cls) ? 1 : 0; + break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { which = 0; - } else { - which = cmp > 0 ? 0 : 1; + break; } } else { which = 1; + break; } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + which = cmp > 0 ? 0 : 1; break; default: g_assert_not_reached(); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Replace the "index" selecting between A and B with a result variable of the proper type. This improves clarity within the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { bool have_snan = false; - int cmp, which; + FloatPartsN *ret; + int cmp; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { - which = is_snan(a->cls) ? 0 : 1; + ret = is_snan(a->cls) ? a : b; break; } /* fall through */ case float_2nan_prop_ab: - which = is_nan(a->cls) ? 0 : 1; + ret = is_nan(a->cls) ? a : b; break; case float_2nan_prop_s_ba: if (have_snan) { - which = is_snan(b->cls) ? 1 : 0; + ret = is_snan(b->cls) ? b : a; break; } /* fall through */ case float_2nan_prop_ba: - which = is_nan(b->cls) ? 1 : 0; + ret = is_nan(b->cls) ? b : a; break; case float_2nan_prop_x87: /* @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, */ if (is_snan(a->cls)) { if (!is_snan(b->cls)) { - which = is_qnan(b->cls) ? 1 : 0; + ret = is_qnan(b->cls) ? b : a; break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { - which = 0; + ret = a; break; } } else { - which = 1; + ret = b; break; } cmp = frac_cmp(a, b); if (cmp == 0) { cmp = a->sign < b->sign; } - which = cmp > 0 ? 0 : 1; + ret = cmp > 0 ? a : b; break; default: g_assert_not_reached(); } - if (which) { - a = b; + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; } static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> I'm migrating to Qualcomm's new open source email infrastructure, so update my email address, and update the mailmap to match. Signed-off-by: Leif Lindholm <leif.lindholm@oss.qualcomm.com> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241205114047.1125842-1-leif.lindholm@oss.qualcomm.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- .mailmap | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <quic_llindhol@quicinc.com> +R: Leif Lindholm <leif.lindholm@oss.qualcomm.com> R: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> L: qemu-arm@nongnu.org S: Maintained diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> Juan Quintela <quintela@trasno.org> <quintela@redhat.com> -Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> -Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <quic_llindhol@quicinc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif.lindholm@linaro.org> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif@nuviainc.com> Luc Michel <luc@lmichel.fr> <luc.michel@git.antfield.fr> Luc Michel <luc@lmichel.fr> <luc.michel@greensocs.com> Luc Michel <luc@lmichel.fr> <lmichel@kalray.eu> -- 2.34.1 From: Vikram Garhwal <vikram.garhwal@bytedance.com> Previously, maintainer role was paused due to inactive email id. Commit id: c009d715721861984c4987bcc78b7ee183e86d75. Signed-off-by: Vikram Garhwal <vikram.garhwal@bytedance.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20241204184205.12952-1-vikram.garhwal@bytedance.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: tests/qtest/fuzz-sb16-test.c Xilinx CAN M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained F: hw/net/can/xlnx-* F: include/hw/net/xlnx-* @@ -XXX,XX +XXX,XX @@ F: include/hw/rx/ CAN bus subsystem and hardware M: Pavel Pisa <pisa@cmp.felk.cvut.cz> M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained W: https://canbus.pages.fel.cvut.cz/ F: net/can/* -- 2.34.1