Arm queue; some of the simpler stuff, things other have reviewed (thanks!), etc. -- PMM The following changes since commit 5d2f557b47dfbf8f23277a5bdd8473d4607c681a: Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging (2020-06-05 13:53:05 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200605 for you to fetch changes up to 2c35a39eda0b16c2ed85c94cec204bf5efb97812: target/arm: Convert Neon one-register-and-immediate insns to decodetree (2020-06-05 17:23:10 +0100) ---------------------------------------------------------------- target-arm queue: hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() target/arm: Convert crypto insns to gvec hw/adc/stm32f2xx_adc: Correct memory region size and access size tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system: Document Aspeed boards raspi: Add model of the USB controller target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree ---------------------------------------------------------------- Cédric Le Goater (1): docs/system: Document Aspeed boards Eden Mikitas (2): hw/ssi/imx_spi: changed while statement to prevent underflow hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave Paul Zimmerman (7): raspi: add BCM2835 SOC MPHI emulation dwc-hsotg (dwc2) USB host controller register definitions dwc-hsotg (dwc2) USB host controller state definitions dwc-hsotg (dwc2) USB host controller emulation usb: add short-packet handling to usb-storage driver wire in the dwc-hsotg (dwc2) USB host controller emulation raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host Peter Maydell (9): target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree target/arm: Convert Neon narrowing shifts with op==8 to decodetree target/arm: Convert Neon narrowing shifts with op==9 to decodetree target/arm: Convert Neon VSHLL, VMOVL to decodetree target/arm: Convert VCVT fixed-point ops to decodetree target/arm: Convert Neon one-register-and-immediate insns to decodetree Philippe Mathieu-Daudé (3): hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() hw/adc/stm32f2xx_adc: Correct memory region size and access size Richard Henderson (6): target/arm: Convert aes and sm4 to gvec helpers target/arm: Convert rax1 to gvec helpers target/arm: Convert sha512 and sm3 to gvec helpers target/arm: Convert sha1 and sha256 to gvec helpers target/arm: Split helper_crypto_sha1_3reg target/arm: Split helper_crypto_sm3tt Thomas Huth (1): tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system/arm/aspeed.rst | 85 ++ docs/system/target-arm.rst | 1 + hw/usb/hcd-dwc2.h | 190 +++++ include/hw/arm/bcm2835_peripherals.h | 5 +- include/hw/misc/bcm2835_mphi.h | 44 + include/hw/usb/dwc2-regs.h | 899 ++++++++++++++++++++ target/arm/helper.h | 45 +- target/arm/translate-a64.h | 3 + target/arm/vec_internal.h | 33 + target/arm/neon-dp.decode | 214 ++++- hw/adc/stm32f2xx_adc.c | 4 +- hw/arm/bcm2835_peripherals.c | 38 +- hw/arm/pxa2xx.c | 66 +- hw/input/pxa2xx_keypad.c | 10 +- hw/misc/bcm2835_mphi.c | 191 +++++ hw/ssi/imx_spi.c | 4 +- hw/usb/dev-storage.c | 15 +- hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++ target/arm/crypto_helper.c | 267 ++++-- target/arm/translate-a64.c | 198 ++--- target/arm/translate-neon.inc.c | 796 ++++++++++++++---- target/arm/translate.c | 539 +----------- target/arm/vec_helper.c | 12 +- hw/misc/Makefile.objs | 1 + hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/trace-events | 50 ++ tests/acceptance/boot_linux_console.py | 35 +- 28 files changed, 4258 insertions(+), 910 deletions(-) create mode 100644 docs/system/arm/aspeed.rst create mode 100644 hw/usb/hcd-dwc2.h create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 include/hw/usb/dwc2-regs.h create mode 100644 target/arm/vec_internal.h create mode 100644 hw/misc/bcm2835_mphi.c create mode 100644 hw/usb/hcd-dwc2.c From: Eden Mikitas <e.mikitas@gmail.com> The while statement in question only checked if tx_burst is not 0. tx_burst is a signed int, which is assigned the value put by the guest driver in ECSPI_CONREG. The burst length can be anywhere between 1 and 4096, and since tx_burst is always decremented by 8 it could possibly underflow, causing an infinite loop. Signed-off-by: Eden Mikitas <e.mikitas@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) rx = 0; - while (tx_burst) { + while (tx_burst > 0) { uint8_t byte = tx & 0xff; DPRINTF("writing 0x%02x\n", (uint32_t)byte); -- 2.20.1 From: Eden Mikitas <e.mikitas@gmail.com> When inserting the value retrieved (rx) from the spi slave, rx is pushed to rx_fifo after being cast to uint8_t. rx_fifo is a fifo32, and the rx register the driver uses is also 32 bit. This zeroes the 24 most significant bits of rx. This proved problematic with devices that expect to use the whole 32 bits of the rx register. Signed-off-by: Eden Mikitas <e.mikitas@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) if (fifo32_is_full(&s->rx_fifo)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_RO; } else { - fifo32_push(&s->rx_fifo, (uint8_t)rx); + fifo32_push(&s->rx_fifo, rx); } if (s->burst_length <= 0) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask() (missed in commit 5a0001ec7e). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/input/pxa2xx_keypad.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/input/pxa2xx_keypad.c b/hw/input/pxa2xx_keypad.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/pxa2xx_keypad.c +++ b/hw/input/pxa2xx_keypad.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "migration/vmstate.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_keypad_read(void *opaque, hwaddr offset, return s->kpkdi; break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_keypad_write(void *opaque, hwaddr offset, break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Replace printf() calls by qemu_log_mask(), which is disabled by default. This avoid flooding the terminal when fuzzing the device. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 66 ++++++++++++++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 17 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/blockdev.h" #include "sysemu/qtest.h" #include "qemu/cutils.h" +#include "qemu/log.h" static struct { hwaddr io_base; @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_pm_read(void *opaque, hwaddr addr, return s->pm_regs[addr >> 2]; default: fail: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_pm_write(void *opaque, hwaddr addr, s->pm_regs[addr >> 2] = value; break; } - - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_cm_read(void *opaque, hwaddr addr, return s->cm_regs[CCCR >> 2] | (3 << 28); default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_cm_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_mm_read(void *opaque, hwaddr addr, return s->mm_regs[addr >> 2]; /* fall through */ default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_mm_write(void *opaque, hwaddr addr, } default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_ssp_read(void *opaque, hwaddr addr, case SSACD: return s->ssacd; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_ssp_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_rtc_read(void *opaque, hwaddr addr, else return s->last_swcr; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_i2c_read(void *opaque, hwaddr addr, s->ibmr = 0; return s->ibmr; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_i2c_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_i2s_read(void *opaque, hwaddr addr, } return 0; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_i2s_write(void *opaque, hwaddr addr, } break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_fir_read(void *opaque, hwaddr addr, case ICFOR: return s->rx_len; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_fir_write(void *opaque, hwaddr addr, case ICFOR: break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> With this conversion, we will be able to use the same helpers with sve. In particular, pass 3 vector parameters for the 3-operand operations; for advsimd the destination register is also an input. This also fixes a bug in which we failed to clear the high bits of the SVE register after an AdvSIMD operation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 6 ++-- target/arm/vec_internal.h | 33 +++++++++++++++++ target/arm/crypto_helper.c | 72 +++++++++++++++++++++++++++----------- target/arm/translate-a64.c | 55 ++++++++++++++++++----------- target/arm/translate.c | 27 +++++++------- target/arm/vec_helper.c | 12 +------ 6 files changed, 138 insertions(+), 67 deletions(-) create mode 100644 target/arm/vec_internal.h diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(neon_qzip8, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_2(neon_qzip16, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_2(neon_qzip32, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) diff --git a/target/arm/vec_internal.h b/target/arm/vec_internal.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_internal.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Helpers + * + * Copyright (c) 2020 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARM_VEC_INTERNALS_H +#define TARGET_ARM_VEC_INTERNALS_H + +static inline void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + +#endif /* TARGET_ARM_VEC_INTERNALS_H */ diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" #include "crypto/aes.h" +#include "vec_internal.h" union CRYPTO_STATE { uint8_t bytes[16]; @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { #define CR_ST_WORD(state, i) (state.words[i]) #endif -void HELPER(crypto_aese)(void *vd, void *vm, uint32_t decrypt) +static void do_crypto_aese(uint64_t *rd, uint64_t *rn, + uint64_t *rm, bool decrypt) { static uint8_t const * const sbox[2] = { AES_sbox, AES_isbox }; static uint8_t const * const shift[2] = { AES_shifts, AES_ishifts }; - uint64_t *rd = vd; - uint64_t *rm = vm; union CRYPTO_STATE rk = { .l = { rm[0], rm[1] } }; - union CRYPTO_STATE st = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE st = { .l = { rn[0], rn[1] } }; int i; - assert(decrypt < 2); - /* xor state vector with round key */ rk.l[0] ^= st.l[0]; rk.l[1] ^= st.l[1]; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aese)(void *vd, void *vm, uint32_t decrypt) rd[1] = st.l[1]; } -void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) +void HELPER(crypto_aese)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + bool decrypt = simd_data(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_aese(vd + i, vn + i, vm + i, decrypt); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + +static void do_crypto_aesmc(uint64_t *rd, uint64_t *rm, bool decrypt) { static uint32_t const mc[][256] = { { /* MixColumns lookup table */ @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) 0xbe805d9f, 0xb58d5491, 0xa89a4f83, 0xa397468d, } }; - uint64_t *rd = vd; - uint64_t *rm = vm; union CRYPTO_STATE st = { .l = { rm[0], rm[1] } }; int i; - assert(decrypt < 2); - for (i = 0; i < 16; i += 4) { CR_ST_WORD(st, i >> 2) = mc[decrypt][CR_ST_BYTE(st, i)] ^ @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) rd[1] = st.l[1]; } +void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + bool decrypt = simd_data(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_aesmc(vd + i, vm + i, decrypt); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + /* * SHA-1 logical functions */ @@ -XXX,XX +XXX,XX @@ static uint8_t const sm4_sbox[] = { 0x79, 0xee, 0x5f, 0x3e, 0xd7, 0xcb, 0x39, 0x48, }; -void HELPER(crypto_sm4e)(void *vd, void *vn) +static void do_crypto_sm4e(uint64_t *rd, uint64_t *rn, uint64_t *rm) { - uint64_t *rd = vd; - uint64_t *rn = vn; - union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; - union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE d = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE n = { .l = { rm[0], rm[1] } }; uint32_t t, i; for (i = 0; i < 4; i++) { @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4e)(void *vd, void *vn) rd[1] = d.l[1]; } -void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) +void HELPER(crypto_sm4e)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_sm4e(vd + i, vn + i, vm + i); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + +static void do_crypto_sm4ekey(uint64_t *rd, uint64_t *rn, uint64_t *rm) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) rd[0] = d.l[0]; rd[1] = d.l[1]; } + +void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_sm4ekey(vd + i, vn + i, vm + i); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_fn4(DisasContext *s, bool is_q, int rd, int rn, int rm, is_q ? 16 : 8, vec_full_reg_size(s)); } +/* Expand a 2-operand operation using an out-of-line helper. */ +static void gen_gvec_op2_ool(DisasContext *s, bool is_q, int rd, + int rn, int data, gen_helper_gvec_2 *fn) +{ + tcg_gen_gvec_2_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); +} + /* Expand a 3-operand operation using an out-of-line helper. */ static void gen_gvec_op3_ool(DisasContext *s, bool is_q, int rd, int rn, int rm, int data, gen_helper_gvec_3 *fn) @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); int decrypt; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; - TCGv_i32 tcg_decrypt; - CryptoThreeOpIntFn *genfn; + gen_helper_gvec_2 *genfn2 = NULL; + gen_helper_gvec_3 *genfn3 = NULL; if (!dc_isar_feature(aa64_aes, s) || size != 0) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) switch (opcode) { case 0x4: /* AESE */ decrypt = 0; - genfn = gen_helper_crypto_aese; + genfn3 = gen_helper_crypto_aese; break; case 0x6: /* AESMC */ decrypt = 0; - genfn = gen_helper_crypto_aesmc; + genfn2 = gen_helper_crypto_aesmc; break; case 0x5: /* AESD */ decrypt = 1; - genfn = gen_helper_crypto_aese; + genfn3 = gen_helper_crypto_aese; break; case 0x7: /* AESIMC */ decrypt = 1; - genfn = gen_helper_crypto_aesmc; + genfn2 = gen_helper_crypto_aesmc; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_decrypt = tcg_const_i32(decrypt); - - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_decrypt); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_i32(tcg_decrypt); + if (genfn2) { + gen_gvec_op2_ool(s, true, rd, rn, decrypt, genfn2); + } else { + gen_gvec_op3_ool(s, true, rd, rd, rn, decrypt, genfn3); + } } /* Crypto three-reg SHA @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool feature; - CryptoThreeOpFn *genfn; + CryptoThreeOpFn *genfn = NULL; + gen_helper_gvec_3 *oolfn = NULL; if (o == 0) { switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; case 2: /* SM4EKEY */ feature = dc_isar_feature(aa64_sm4, s); - genfn = gen_helper_crypto_sm4ekey; + oolfn = gen_helper_crypto_sm4ekey; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) return; } + if (oolfn) { + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); + return; + } + if (genfn) { TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; bool feature; CryptoTwoOpFn *genfn; + gen_helper_gvec_3 *oolfn = NULL; switch (opcode) { case 0: /* SHA512SU0 */ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) break; case 1: /* SM4E */ feature = dc_isar_feature(aa64_sm4, s); - genfn = gen_helper_crypto_sm4e; + oolfn = gen_helper_crypto_sm4e; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) return; } + if (oolfn) { + gen_gvec_op3_ool(s, true, rd, rd, rn, 0, oolfn); + return; + } + tcg_rd_ptr = vec_full_reg_ptr(s, rd); tcg_rn_ptr = vec_full_reg_ptr(s, rn); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa32_aes, s) || ((rm | rd) & 1)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - - /* Bit 6 is the lowest opcode bit; it distinguishes between - * encryption (AESE/AESMC) and decryption (AESD/AESIMC) - */ - tmp3 = tcg_const_i32(extract32(insn, 6, 1)); - + /* + * Bit 6 is the lowest opcode bit; it distinguishes + * between encryption (AESE/AESMC) and decryption + * (AESD/AESIMC). + */ if (op == NEON_2RM_AESE) { - gen_helper_crypto_aese(ptr1, ptr2, tmp3); + tcg_gen_gvec_3_ool(vfp_reg_offset(true, rd), + vfp_reg_offset(true, rd), + vfp_reg_offset(true, rm), + 16, 16, extract32(insn, 6, 1), + gen_helper_crypto_aese); } else { - gen_helper_crypto_aesmc(ptr1, ptr2, tmp3); + tcg_gen_gvec_2_ool(vfp_reg_offset(true, rd), + vfp_reg_offset(true, rm), + 16, 16, extract32(insn, 6, 1), + gen_helper_crypto_aesmc); } - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_i32(tmp3); break; case NEON_2RM_SHA1H: if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" #include "fpu/softfloat.h" - +#include "vec_internal.h" /* Note that vector data is stored in host-endian 64-bit chunks, so addressing units smaller than that needs a host-endian fixup. */ @@ -XXX,XX +XXX,XX @@ #define H4(x) (x) #endif -static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) -{ - uint64_t *d = vd + opr_sz; - uintptr_t i; - - for (i = opr_sz; i < max_sz; i += 8) { - *d++ = 0; - } -} - /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static int16_t inl_qrdmlah_s16(int16_t src1, int16_t src2, int16_t src3, uint32_t *sat) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> With this conversion, we will be able to use the same helpers with sve. This also fixes a bug in which we failed to clear the high bits of the SVE register after an AdvSIMD operation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 ++ target/arm/translate-a64.h | 3 ++ target/arm/crypto_helper.c | 11 +++++++ target/arm/translate-a64.c | 59 ++++++++++++++++++++------------------ 4 files changed, 47 insertions(+), 28 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_rax1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int vec_full_reg_size(DisasContext *s) bool disas_sve(DisasContext *, uint32_t); +void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, + uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz); + #endif /* TARGET_ARM_TRANSLATE_A64_H */ diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm, uint32_t desc) } clear_tail(vd, opr_sz, simd_maxsz(desc)); } + +void HELPER(crypto_rax1)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + uint64_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 8; ++i) { + d[i] = n[i] ^ rol64(m[i], 1); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); } +static void gen_rax1_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m) +{ + tcg_gen_rotli_i64(d, m, 1); + tcg_gen_xor_i64(d, d, n); +} + +static void gen_rax1_vec(unsigned vece, TCGv_vec d, TCGv_vec n, TCGv_vec m) +{ + tcg_gen_rotli_vec(vece, d, m, 1); + tcg_gen_xor_vec(vece, d, d, n); +} + +void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, + uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz) +{ + static const TCGOpcode vecop_list[] = { INDEX_op_rotli_vec, 0 }; + static const GVecGen3 op = { + .fni8 = gen_rax1_i64, + .fniv = gen_rax1_vec, + .opt_opc = vecop_list, + .fno = gen_helper_crypto_rax1, + .vece = MO_64, + }; + tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz, &op); +} + /* Crypto three-reg SHA512 * 31 21 20 16 15 14 13 12 11 10 9 5 4 0 * +-----------------------+------+---+---+-----+--------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) bool feature; CryptoThreeOpFn *genfn = NULL; gen_helper_gvec_3 *oolfn = NULL; + GVecGen3Fn *gvecfn = NULL; if (o == 0) { switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; case 3: /* RAX1 */ feature = dc_isar_feature(aa64_sha3, s); - genfn = NULL; + gvecfn = gen_gvec_rax1; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) if (oolfn) { gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); - return; - } - - if (genfn) { + } else if (gvecfn) { + gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); + } else { TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; tcg_rd_ptr = vec_full_reg_ptr(s, rd); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rd_ptr); tcg_temp_free_ptr(tcg_rn_ptr); tcg_temp_free_ptr(tcg_rm_ptr); - } else { - TCGv_i64 tcg_op1, tcg_op2, tcg_res[2]; - int pass; - - tcg_op1 = tcg_temp_new_i64(); - tcg_op2 = tcg_temp_new_i64(); - tcg_res[0] = tcg_temp_new_i64(); - tcg_res[1] = tcg_temp_new_i64(); - - for (pass = 0; pass < 2; pass++) { - read_vec_element(s, tcg_op1, rn, pass, MO_64); - read_vec_element(s, tcg_op2, rm, pass, MO_64); - - tcg_gen_rotli_i64(tcg_res[pass], tcg_op2, 1); - tcg_gen_xor_i64(tcg_res[pass], tcg_res[pass], tcg_op1); - } - write_vec_element(s, tcg_res[0], rd, 0, MO_64); - write_vec_element(s, tcg_res[1], rd, 1, MO_64); - - tcg_temp_free_i64(tcg_op1); - tcg_temp_free_i64(tcg_op2); - tcg_temp_free_i64(tcg_res[0]); - tcg_temp_free_i64(tcg_res[1]); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not yet convert the helpers to loop over opr_sz, but the descriptor allows the vector tail to be cleared. Which fixes an existing bug vs SVE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 15 +++++++----- target/arm/crypto_helper.c | 37 +++++++++++++++++++++++----- target/arm/translate-a64.c | 50 ++++++++++++-------------------------- 3 files changed, 55 insertions(+), 47 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha512su1, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) -DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sm3partw1, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3partw2, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { #define CR_ST_WORD(state, i) (state.words[i]) #endif +/* + * The caller has not been converted to full gvec, and so only + * modifies the low 16 bytes of the vector register. + */ +static void clear_tail_16(void *vd, uint32_t desc) +{ + int opr_sz = simd_oprsz(desc); + int max_sz = simd_maxsz(desc); + + assert(opr_sz == 16); + clear_tail(vd, opr_sz, max_sz); +} + static void do_crypto_aese(uint64_t *rd, uint64_t *rn, uint64_t *rm, bool decrypt) { @@ -XXX,XX +XXX,XX @@ static uint64_t s1_512(uint64_t x) return ror64(x, 19) ^ ror64(x, 61) ^ (x >> 6); } -void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512su0)(void *vd, void *vn) +void HELPER(crypto_sha512su0)(void *vd, void *vn, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su0)(void *vd, void *vn) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) rd[0] += s1_512(rn[0]) + rm[0]; rd[1] += s1_512(rn[1]) + rm[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool feature; - CryptoThreeOpFn *genfn = NULL; gen_helper_gvec_3 *oolfn = NULL; GVecGen3Fn *gvecfn = NULL; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SHA512H */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512h; + oolfn = gen_helper_crypto_sha512h; break; case 1: /* SHA512H2 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512h2; + oolfn = gen_helper_crypto_sha512h2; break; case 2: /* SHA512SU1 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512su1; + oolfn = gen_helper_crypto_sha512su1; break; case 3: /* RAX1 */ feature = dc_isar_feature(aa64_sha3, s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SM3PARTW1 */ feature = dc_isar_feature(aa64_sm3, s); - genfn = gen_helper_crypto_sm3partw1; + oolfn = gen_helper_crypto_sm3partw1; break; case 1: /* SM3PARTW2 */ feature = dc_isar_feature(aa64_sm3, s); - genfn = gen_helper_crypto_sm3partw2; + oolfn = gen_helper_crypto_sm3partw2; break; case 2: /* SM4EKEY */ feature = dc_isar_feature(aa64_sm4, s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) if (oolfn) { gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); - } else if (gvecfn) { - gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); } else { - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); + gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); } } @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) int opcode = extract32(insn, 10, 2); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; bool feature; - CryptoTwoOpFn *genfn; - gen_helper_gvec_3 *oolfn = NULL; switch (opcode) { case 0: /* SHA512SU0 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512su0; break; case 1: /* SM4E */ feature = dc_isar_feature(aa64_sm4, s); - oolfn = gen_helper_crypto_sm4e; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) return; } - if (oolfn) { - gen_gvec_op3_ool(s, true, rd, rd, rn, 0, oolfn); - return; + switch (opcode) { + case 0: /* SHA512SU0 */ + gen_gvec_op2_ool(s, true, rd, rn, 0, gen_helper_crypto_sha512su0); + break; + case 1: /* SM4E */ + gen_gvec_op3_ool(s, true, rd, rd, rn, 0, gen_helper_crypto_sm4e); + break; + default: + g_assert_not_reached(); } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - - genfn(tcg_rd_ptr, tcg_rn_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); } /* Crypto four-register -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not yet convert the helpers to loop over opr_sz, but the descriptor allows the vector tail to be cleared. Which fixes an existing bug vs SVE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 12 ++-- target/arm/neon-dp.decode | 12 ++-- target/arm/crypto_helper.c | 24 +++++-- target/arm/translate-a64.c | 34 ++++----- target/arm/translate-neon.inc.c | 124 +++++--------------------------- target/arm/translate.c | 24 ++----- 6 files changed, 67 insertions(+), 163 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) -DEF_HELPER_FLAGS_2(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(crypto_sha256h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sha256h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VPADD_3s 1111 001 0 0 . .. .... .... 1011 . . . 1 .... @3same_q0 VQRDMLAH_3s 1111 001 1 0 . .. .... .... 1011 ... 1 .... @3same +@3same_crypto .... .... .... .... .... .... .... .... \ + &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=0 q=1 + SHA1_3s 1111 001 0 0 . optype:2 .... .... 1100 . 1 . 0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto VFMA_fp_3s 1111 001 0 0 . 0 . .... .... 1100 ... 1 .... @3same_fp VFMS_fp_3s 1111 001 0 0 . 1 . .... .... 1100 ... 1 .... @3same_fp diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1_3reg)(void *vd, void *vn, void *vm, uint32_t op) rd[1] = d.l[1]; } -void HELPER(crypto_sha1h)(void *vd, void *vm) +void HELPER(crypto_sha1h)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1h)(void *vd, void *vm) rd[0] = m.l[0]; rd[1] = m.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha1su1)(void *vd, void *vm) +void HELPER(crypto_sha1su1)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1su1)(void *vd, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } /* @@ -XXX,XX +XXX,XX @@ static uint32_t s1(uint32_t x) return ror32(x, 17) ^ ror32(x, 19) ^ (x >> 10); } -void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256su0)(void *vd, void *vm) +void HELPER(crypto_sha256su0)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su0)(void *vd, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) int rm = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - CryptoThreeOpFn *genfn; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; + gen_helper_gvec_3 *genfn; bool feature; if (size != 0) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) return; } - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - if (genfn) { - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); } else { TCGv_i32 tcg_opcode = tcg_const_i32(opcode); + TCGv_ptr tcg_rd_ptr = vec_full_reg_ptr(s, rd); + TCGv_ptr tcg_rn_ptr = vec_full_reg_ptr(s, rn); + TCGv_ptr tcg_rm_ptr = vec_full_reg_ptr(s, rm); gen_helper_crypto_sha1_3reg(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_opcode); - tcg_temp_free_i32(tcg_opcode); - } - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); + tcg_temp_free_i32(tcg_opcode); + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); + tcg_temp_free_ptr(tcg_rm_ptr); + } } /* Crypto two-reg SHA @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) int opcode = extract32(insn, 12, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - CryptoTwoOpFn *genfn; + gen_helper_gvec_2 *genfn; bool feature; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; if (size != 0) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - - genfn(tcg_rd_ptr, tcg_rn_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); + gen_gvec_op2_ool(s, true, rd, rn, 0, genfn); } static void gen_rax1_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m) diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_3SAME_CMP(VCGE_S, TCG_COND_GE) DO_3SAME_CMP(VCGE_U, TCG_COND_GEU) DO_3SAME_CMP(VCEQ, TCG_COND_EQ) -static void gen_VMUL_p_3s(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, - uint32_t rm_ofs, uint32_t oprsz, uint32_t maxsz) -{ - tcg_gen_gvec_3_ool(rd_ofs, rn_ofs, rm_ofs, oprsz, maxsz, - 0, gen_helper_gvec_pmul_b); -} +#define WRAP_OOL_FN(WRAPNAME, FUNC) \ + static void WRAPNAME(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, \ + uint32_t rm_ofs, uint32_t oprsz, uint32_t maxsz) \ + { \ + tcg_gen_gvec_3_ool(rd_ofs, rn_ofs, rm_ofs, oprsz, maxsz, 0, FUNC); \ + } + +WRAP_OOL_FN(gen_VMUL_p_3s, gen_helper_gvec_pmul_b) static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a) { @@ -XXX,XX +XXX,XX @@ static bool trans_SHA1_3s(DisasContext *s, arg_SHA1_3s *a) return true; } -static bool trans_SHA256H_3s(DisasContext *s, arg_SHA256H_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; +#define DO_SHA2(NAME, FUNC) \ + WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ + static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \ + { \ + if (!dc_isar_feature(aa32_sha2, s)) { \ + return false; \ + } \ + return do_3same(s, a, gen_##NAME##_3s); \ } - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256h(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} - -static bool trans_SHA256H2_3s(DisasContext *s, arg_SHA256H2_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256h2(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} - -static bool trans_SHA256SU1_3s(DisasContext *s, arg_SHA256SU1_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256su1(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} +DO_SHA2(SHA256H, gen_helper_crypto_sha256h) +DO_SHA2(SHA256H2, gen_helper_crypto_sha256h2) +DO_SHA2(SHA256SU1, gen_helper_crypto_sha256su1) #define DO_3SAME_64(INSN, FUNC) \ static void gen_##INSN##_3s(unsigned vece, uint32_t rd_ofs, \ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int vec_size; uint32_t imm; TCGv_i32 tmp, tmp2, tmp3, tmp4, tmp5; - TCGv_ptr ptr1, ptr2; + TCGv_ptr ptr1; TCGv_i64 tmp64; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - - gen_helper_crypto_sha1h(ptr1, ptr2); - - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, + gen_helper_crypto_sha1h); break; case NEON_2RM_SHA1SU1: if ((rm | rd) & 1) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } else if (!dc_isar_feature(aa32_sha1, s)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - if (q) { - gen_helper_crypto_sha256su0(ptr1, ptr2); - } else { - gen_helper_crypto_sha1su1(ptr1, ptr2); - } - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, + q ? gen_helper_crypto_sha256su0 + : gen_helper_crypto_sha1su1); break; - case NEON_2RM_VMVN: tcg_gen_gvec_not(0, rd_ofs, rm_ofs, vec_size, vec_size); break; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than passing an opcode to a helper, fully decode the operation at translate time. Use clear_tail_16 to zap the balance of the SVE register with the AdvSIMD write. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 +- target/arm/neon-dp.decode | 6 +- target/arm/crypto_helper.c | 99 +++++++++++++++++++++------------ target/arm/translate-a64.c | 29 ++++------ target/arm/translate-neon.inc.c | 46 ++++----------- 5 files changed, 93 insertions(+), 92 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(neon_qzip32, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1su0, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1c, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1p, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1m, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr, i32) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VQRDMLAH_3s 1111 001 1 0 . .. .... .... 1011 ... 1 .... @3same @3same_crypto .... .... .... .... .... .... .... .... \ &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=0 q=1 -SHA1_3s 1111 001 0 0 . optype:2 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +SHA1C_3s 1111 001 0 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1P_3s 1111 001 0 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1M_3s 1111 001 0 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1SU0_3s 1111 001 0 0 . 11 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { }; #ifdef HOST_WORDS_BIGENDIAN -#define CR_ST_BYTE(state, i) (state.bytes[(15 - (i)) ^ 8]) -#define CR_ST_WORD(state, i) (state.words[(3 - (i)) ^ 2]) +#define CR_ST_BYTE(state, i) ((state).bytes[(15 - (i)) ^ 8]) +#define CR_ST_WORD(state, i) ((state).words[(3 - (i)) ^ 2]) #else -#define CR_ST_BYTE(state, i) (state.bytes[i]) -#define CR_ST_WORD(state, i) (state.words[i]) +#define CR_ST_BYTE(state, i) ((state).bytes[i]) +#define CR_ST_WORD(state, i) ((state).words[i]) #endif /* @@ -XXX,XX +XXX,XX @@ static uint32_t maj(uint32_t x, uint32_t y, uint32_t z) return (x & y) | ((x | y) & z); } -void HELPER(crypto_sha1_3reg)(void *vd, void *vn, void *vm, uint32_t op) +void HELPER(crypto_sha1su0)(void *vd, void *vn, void *vm, uint32_t desc) +{ + uint64_t *d = vd, *n = vn, *m = vm; + uint64_t d0, d1; + + d0 = d[1] ^ d[0] ^ m[0]; + d1 = n[0] ^ d[1] ^ m[1]; + d[0] = d0; + d[1] = d1; + + clear_tail_16(vd, desc); +} + +static inline void crypto_sha1_3reg(uint64_t *rd, uint64_t *rn, + uint64_t *rm, uint32_t desc, + uint32_t (*fn)(union CRYPTO_STATE *d)) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + int i; - if (op == 3) { /* sha1su0 */ - d.l[0] ^= d.l[1] ^ m.l[0]; - d.l[1] ^= n.l[0] ^ m.l[1]; - } else { - int i; + for (i = 0; i < 4; i++) { + uint32_t t = fn(&d); - for (i = 0; i < 4; i++) { - uint32_t t; + t += rol32(CR_ST_WORD(d, 0), 5) + CR_ST_WORD(n, 0) + + CR_ST_WORD(m, i); - switch (op) { - case 0: /* sha1c */ - t = cho(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - case 1: /* sha1p */ - t = par(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - case 2: /* sha1m */ - t = maj(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - default: - g_assert_not_reached(); - } - t += rol32(CR_ST_WORD(d, 0), 5) + CR_ST_WORD(n, 0) - + CR_ST_WORD(m, i); - - CR_ST_WORD(n, 0) = CR_ST_WORD(d, 3); - CR_ST_WORD(d, 3) = CR_ST_WORD(d, 2); - CR_ST_WORD(d, 2) = ror32(CR_ST_WORD(d, 1), 2); - CR_ST_WORD(d, 1) = CR_ST_WORD(d, 0); - CR_ST_WORD(d, 0) = t; - } + CR_ST_WORD(n, 0) = CR_ST_WORD(d, 3); + CR_ST_WORD(d, 3) = CR_ST_WORD(d, 2); + CR_ST_WORD(d, 2) = ror32(CR_ST_WORD(d, 1), 2); + CR_ST_WORD(d, 1) = CR_ST_WORD(d, 0); + CR_ST_WORD(d, 0) = t; } rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(rd, desc); +} + +static uint32_t do_sha1c(union CRYPTO_STATE *d) +{ + return cho(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1c)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1c); +} + +static uint32_t do_sha1p(union CRYPTO_STATE *d) +{ + return par(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1p)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1p); +} + +static uint32_t do_sha1m(union CRYPTO_STATE *d) +{ + return maj(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1m)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1m); } void HELPER(crypto_sha1h)(void *vd, void *vm, uint32_t desc) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SHA1C */ + genfn = gen_helper_crypto_sha1c; + feature = dc_isar_feature(aa64_sha1, s); + break; case 1: /* SHA1P */ + genfn = gen_helper_crypto_sha1p; + feature = dc_isar_feature(aa64_sha1, s); + break; case 2: /* SHA1M */ + genfn = gen_helper_crypto_sha1m; + feature = dc_isar_feature(aa64_sha1, s); + break; case 3: /* SHA1SU0 */ - genfn = NULL; + genfn = gen_helper_crypto_sha1su0; feature = dc_isar_feature(aa64_sha1, s); break; case 4: /* SHA256H */ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - if (genfn) { - gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); - } else { - TCGv_i32 tcg_opcode = tcg_const_i32(opcode); - TCGv_ptr tcg_rd_ptr = vec_full_reg_ptr(s, rd); - TCGv_ptr tcg_rn_ptr = vec_full_reg_ptr(s, rn); - TCGv_ptr tcg_rm_ptr = vec_full_reg_ptr(s, rm); - - gen_helper_crypto_sha1_3reg(tcg_rd_ptr, tcg_rn_ptr, - tcg_rm_ptr, tcg_opcode); - - tcg_temp_free_i32(tcg_opcode); - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); - } + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); } /* Crypto two-reg SHA diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a) DO_VQRDMLAH(VQRDMLAH, gen_gvec_sqrdmlah_qc) DO_VQRDMLAH(VQRDMLSH, gen_gvec_sqrdmlsh_qc) -static bool trans_SHA1_3s(DisasContext *s, arg_SHA1_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - TCGv_i32 tmp; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha1, s)) { - return false; +#define DO_SHA1(NAME, FUNC) \ + WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ + static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \ + { \ + if (!dc_isar_feature(aa32_sha1, s)) { \ + return false; \ + } \ + return do_3same(s, a, gen_##NAME##_3s); \ } - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - tmp = tcg_const_i32(a->optype); - gen_helper_crypto_sha1_3reg(ptr1, ptr2, ptr3, tmp); - tcg_temp_free_i32(tmp); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} +DO_SHA1(SHA1C, gen_helper_crypto_sha1c) +DO_SHA1(SHA1P, gen_helper_crypto_sha1p) +DO_SHA1(SHA1M, gen_helper_crypto_sha1m) +DO_SHA1(SHA1SU0, gen_helper_crypto_sha1su0) #define DO_SHA2(NAME, FUNC) \ WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than passing an opcode to a helper, fully decode the operation at translate time. Use clear_tail_16 to zap the balance of the SVE register with the AdvSIMD write. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 ++++- target/arm/crypto_helper.c | 24 ++++++++++++++++++------ target/arm/translate-a64.c | 21 +++++---------------- 3 files changed, 27 insertions(+), 23 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) -DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt1a, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt1b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt2a, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt2b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm3partw2, TCG_CALL_NO_RWG, diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm, uint32_t desc) clear_tail_16(vd, desc); } -void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, - uint32_t opcode) +static inline void QEMU_ALWAYS_INLINE +crypto_sm3tt(uint64_t *rd, uint64_t *rn, uint64_t *rm, + uint32_t desc, uint32_t opcode) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t imm2 = simd_data(desc); uint32_t t; assert(imm2 < 4); @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, /* SM3TT2B */ t = cho(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); } else { - g_assert_not_reached(); + qemu_build_not_reached(); } t += CR_ST_WORD(d, 0) + CR_ST_WORD(m, imm2); @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(rd, desc); } +#define DO_SM3TT(NAME, OPCODE) \ + void HELPER(NAME)(void *vd, void *vn, void *vm, uint32_t desc) \ + { crypto_sm3tt(vd, vn, vm, desc, OPCODE); } + +DO_SM3TT(crypto_sm3tt1a, 0) +DO_SM3TT(crypto_sm3tt1b, 1) +DO_SM3TT(crypto_sm3tt2a, 2) +DO_SM3TT(crypto_sm3tt2b, 3) + +#undef DO_SM3TT + static uint8_t const sm4_sbox[] = { 0xd6, 0x90, 0xe9, 0xfe, 0xcc, 0xe1, 0x3d, 0xb7, 0x16, 0xb6, 0x14, 0xc2, 0x28, 0xfb, 0x2c, 0x05, diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_xar(DisasContext *s, uint32_t insn) */ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) { + static gen_helper_gvec_3 * const fns[4] = { + gen_helper_crypto_sm3tt1a, gen_helper_crypto_sm3tt1b, + gen_helper_crypto_sm3tt2a, gen_helper_crypto_sm3tt2b, + }; int opcode = extract32(insn, 10, 2); int imm2 = extract32(insn, 12, 2); int rm = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; - TCGv_i32 tcg_imm2, tcg_opcode; if (!dc_isar_feature(aa64_sm3, s)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) return; } - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - tcg_imm2 = tcg_const_i32(imm2); - tcg_opcode = tcg_const_i32(opcode); - - gen_helper_crypto_sm3tt(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_imm2, - tcg_opcode); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); - tcg_temp_free_i32(tcg_imm2); - tcg_temp_free_i32(tcg_opcode); + gen_gvec_op3_ool(s, true, rd, rn, rm, imm2, fns[opcode]); } /* C3.6 Data processing - SIMD, inc Crypto -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The ADC region size is 256B, split as: - [0x00 - 0x4f] defined - [0x50 - 0xff] reserved All registers are 32-bit (thus when the datasheet mentions the last defined register is 0x4c, it means its address range is 0x4c .. 0x4f. This model implementation is also 32-bit. Set MemoryRegionOps 'impl' fields. See: 'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map". Reported-by: Seth Kintigh <skintigh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200603055915.17678-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/adc/stm32f2xx_adc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/adc/stm32f2xx_adc.c b/hw/adc/stm32f2xx_adc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/adc/stm32f2xx_adc.c +++ b/hw/adc/stm32f2xx_adc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps stm32f2xx_adc_ops = { .read = stm32f2xx_adc_read, .write = stm32f2xx_adc_write, .endianness = DEVICE_NATIVE_ENDIAN, + .impl.min_access_size = 4, + .impl.max_access_size = 4, }; static const VMStateDescription vmstate_stm32f2xx_adc = { @@ -XXX,XX +XXX,XX @@ static void stm32f2xx_adc_init(Object *obj) sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); memory_region_init_io(&s->mmio, obj, &stm32f2xx_adc_ops, s, - TYPE_STM32F2XX_ADC, 0xFF); + TYPE_STM32F2XX_ADC, 0x100); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); } -- 2.20.1 From: Thomas Huth <thuth@redhat.com> As described by Edgar here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html we can use the Ubuntu kernel for testing the xlnx-versal-virt machine. So let's add a boot test for this now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200525141237.15243-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(LinuxKernelTest): console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + def test_aarch64_xlnx_versal_virt(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:xlnx-versal-virt + :avocado: tags=device:pl011 + :avocado: tags=device:arm_gicv3 + """ + kernel_url = ('http://ports.ubuntu.com/ubuntu-ports/dists/' + 'bionic-updates/main/installer-arm64/current/images/' + 'netboot/ubuntu-installer/arm64/linux') + kernel_hash = '5bfc54cf7ed8157d93f6e5b0241e727b6dc22c50' + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) + + initrd_url = ('http://ports.ubuntu.com/ubuntu-ports/dists/' + 'bionic-updates/main/installer-arm64/current/images/' + 'netboot/ubuntu-installer/arm64/initrd.gz') + initrd_hash = 'd385d3e88d53e2004c5d43cbe668b458a094f772' + initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash) + + self.vm.set_console() + self.vm.add_args('-m', '2G', + '-kernel', kernel_path, + '-initrd', initrd_path) + self.vm.launch() + self.wait_for_console_pattern('Checked W+X mappings: passed') + def test_arm_virt(self): """ :avocado: tags=arch:arm -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200602135050.593692-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 85 ++++++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 86 insertions(+) create mode 100644 docs/system/arm/aspeed.rst diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ +Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``) +================================================================== + +The QEMU Aspeed machines model BMCs of various OpenPOWER systems and +Aspeed evaluation boards. They are based on different releases of the +Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the +AST2500 with an ARM1176JZS CPU (800MHz) and more recently the AST2600 +with dual cores ARM Cortex A7 CPUs (1.2GHz). + +The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C, +etc. + +AST2400 SoC based machines : + +- ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC + +AST2500 SoC based machines : + +- ``ast2500-evb`` Aspeed AST2500 Evaluation board +- ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC +- ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC +- ``sonorapass-bmc`` OCP SonoraPass BMC +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 + +AST2600 SoC based machines : + +- ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex A7) +- ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC + +Supported devices +----------------- + + * SMP (for the AST2600 Cortex-A7) + * Interrupt Controller (VIC) + * Timer Controller + * RTC Controller + * I2C Controller + * System Control Unit (SCU) + * SRAM mapping + * X-DMA Controller (basic interface) + * Static Memory Controller (SMC or FMC) - Only SPI Flash support + * SPI Memory Controller + * USB 2.0 Controller + * SD/MMC storage controllers + * SDRAM controller (dummy interface for basic settings and training) + * Watchdog Controller + * GPIO Controller (Master only) + * UART + * Ethernet controllers + + +Missing devices +--------------- + + * Coprocessor support + * ADC (out of tree implementation) + * PWM and Fan Controller + * LPC Bus Controller + * Slave GPIO Controller + * Super I/O Controller + * Hash/Crypto Engine + * PCI-Express 1 Controller + * Graphic Display Controller + * PECI Controller + * MCTP Controller + * Mailbox Controller + * Virtual UART + * eSPI Controller + * I3C Controller + +Boot options +------------ + +The Aspeed machines can be started using the -kernel option to load a +Linux kernel or from a firmare image which can be downloaded from the +OpenPOWER jenkins : + + https://openpower.xyz/ + +The image should be attached as an MTD drive. Run : + +.. code-block:: bash + + $ qemu-system-arm -M romulus-bmc -nic user \ + -drive file=flash-romulus,format=raw,if=mtd -nographic diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/realview arm/versatile arm/vexpress + arm/aspeed arm/musicpal arm/nseries arm/orangepi -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add BCM2835 SOC MPHI (Message-based Parallel Host Interface) emulation. It is very basic, only providing the FIQ interrupt needed to allow the dwc-otg USB host controller driver in the Raspbian kernel to function. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200520235349.21215-2-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 2 + include/hw/misc/bcm2835_mphi.h | 44 ++++++ hw/arm/bcm2835_peripherals.c | 17 +++ hw/misc/bcm2835_mphi.c | 191 +++++++++++++++++++++++++++ hw/misc/Makefile.objs | 1 + 5 files changed, 255 insertions(+) create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 hw/misc/bcm2835_mphi.c diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_property.h" #include "hw/misc/bcm2835_rng.h" #include "hw/misc/bcm2835_mbox.h" +#include "hw/misc/bcm2835_mphi.h" #include "hw/misc/bcm2835_thermal.h" #include "hw/sd/sdhci.h" #include "hw/sd/bcm2835_sdhost.h" @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { qemu_irq irq, fiq; BCM2835SystemTimerState systmr; + BCM2835MphiState mphi; UnimplementedDeviceState armtmr; UnimplementedDeviceState cprman; UnimplementedDeviceState a2w; diff --git a/include/hw/misc/bcm2835_mphi.h b/include/hw/misc/bcm2835_mphi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_mphi.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 SOC MPHI state definitions + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HW_MISC_BCM2835_MPHI_H +#define HW_MISC_BCM2835_MPHI_H + +#include "hw/irq.h" +#include "hw/sysbus.h" + +#define MPHI_MMIO_SIZE 0x1000 + +typedef struct BCM2835MphiState BCM2835MphiState; + +struct BCM2835MphiState { + SysBusDevice parent_obj; + qemu_irq irq; + MemoryRegion iomem; + + uint32_t outdda; + uint32_t outddb; + uint32_t ctrl; + uint32_t intstat; + uint32_t swirq; +}; + +#define TYPE_BCM2835_MPHI "bcm2835-mphi" + +#define BCM2835_MPHI(obj) \ + OBJECT_CHECK(BCM2835MphiState, (obj), TYPE_BCM2835_MPHI) + +#endif diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) OBJECT(&s->sdhci.sdbus)); object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost", OBJECT(&s->sdhost.sdbus)); + + /* Mphi */ + sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi), + TYPE_BCM2835_MPHI); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus"); + /* Mphi */ + object_property_set_bool(OBJECT(&s->mphi), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, MPHI_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mphi), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mphi), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_HOSTPORT)); + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); diff --git a/hw/misc/bcm2835_mphi.c b/hw/misc/bcm2835_mphi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/bcm2835_mphi.c @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 SOC MPHI emulation + * + * Very basic emulation, only providing the FIQ interrupt needed to + * allow the dwc-otg USB host controller driver in the Raspbian kernel + * to function. + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/misc/bcm2835_mphi.h" +#include "migration/vmstate.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" + +static inline void mphi_raise_irq(BCM2835MphiState *s) +{ + qemu_set_irq(s->irq, 1); +} + +static inline void mphi_lower_irq(BCM2835MphiState *s) +{ + qemu_set_irq(s->irq, 0); +} + +static uint64_t mphi_reg_read(void *ptr, hwaddr addr, unsigned size) +{ + BCM2835MphiState *s = ptr; + uint32_t val = 0; + + switch (addr) { + case 0x28: /* outdda */ + val = s->outdda; + break; + case 0x2c: /* outddb */ + val = s->outddb; + break; + case 0x4c: /* ctrl */ + val = s->ctrl; + val |= 1 << 17; + break; + case 0x50: /* intstat */ + val = s->intstat; + break; + case 0x1f0: /* swirq_set */ + val = s->swirq; + break; + case 0x1f4: /* swirq_clr */ + val = s->swirq; + break; + default: + qemu_log_mask(LOG_UNIMP, "read from unknown register"); + break; + } + + return val; +} + +static void mphi_reg_write(void *ptr, hwaddr addr, uint64_t val, unsigned size) +{ + BCM2835MphiState *s = ptr; + int do_irq = 0; + + switch (addr) { + case 0x28: /* outdda */ + s->outdda = val; + break; + case 0x2c: /* outddb */ + s->outddb = val; + if (val & (1 << 29)) { + do_irq = 1; + } + break; + case 0x4c: /* ctrl */ + s->ctrl = val; + if (val & (1 << 16)) { + do_irq = -1; + } + break; + case 0x50: /* intstat */ + s->intstat = val; + if (val & ((1 << 16) | (1 << 29))) { + do_irq = -1; + } + break; + case 0x1f0: /* swirq_set */ + s->swirq |= val; + do_irq = 1; + break; + case 0x1f4: /* swirq_clr */ + s->swirq &= ~val; + do_irq = -1; + break; + default: + qemu_log_mask(LOG_UNIMP, "write to unknown register"); + return; + } + + if (do_irq > 0) { + mphi_raise_irq(s); + } else if (do_irq < 0) { + mphi_lower_irq(s); + } +} + +static const MemoryRegionOps mphi_mmio_ops = { + .read = mphi_reg_read, + .write = mphi_reg_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mphi_reset(DeviceState *dev) +{ + BCM2835MphiState *s = BCM2835_MPHI(dev); + + s->outdda = 0; + s->outddb = 0; + s->ctrl = 0; + s->intstat = 0; + s->swirq = 0; +} + +static void mphi_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + BCM2835MphiState *s = BCM2835_MPHI(dev); + + sysbus_init_irq(sbd, &s->irq); +} + +static void mphi_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + BCM2835MphiState *s = BCM2835_MPHI(obj); + + memory_region_init_io(&s->iomem, obj, &mphi_mmio_ops, s, "mphi", MPHI_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +const VMStateDescription vmstate_mphi_state = { + .name = "mphi", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(outdda, BCM2835MphiState), + VMSTATE_UINT32(outddb, BCM2835MphiState), + VMSTATE_UINT32(ctrl, BCM2835MphiState), + VMSTATE_UINT32(intstat, BCM2835MphiState), + VMSTATE_UINT32(swirq, BCM2835MphiState), + VMSTATE_END_OF_LIST() + } +}; + +static void mphi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = mphi_realize; + dc->reset = mphi_reset; + dc->vmsd = &vmstate_mphi_state; +} + +static const TypeInfo bcm2835_mphi_type_info = { + .name = TYPE_BCM2835_MPHI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835MphiState), + .instance_init = mphi_init, + .class_init = mphi_class_init, +}; + +static void bcm2835_mphi_register_types(void) +{ + type_register_static(&bcm2835_mphi_type_info); +} + +type_init(bcm2835_mphi_register_types) diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_OMAP) += omap_l4.o common-obj-$(CONFIG_OMAP) += omap_sdrc.o common-obj-$(CONFIG_OMAP) += omap_tap.o common-obj-$(CONFIG_RASPI) += bcm2835_mbox.o +common-obj-$(CONFIG_RASPI) += bcm2835_mphi.o common-obj-$(CONFIG_RASPI) += bcm2835_property.o common-obj-$(CONFIG_RASPI) += bcm2835_rng.o common-obj-$(CONFIG_RASPI) += bcm2835_thermal.o -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Import the dwc-hsotg (dwc2) register definitions file from the Linux kernel. This is a copy of drivers/usb/dwc2/hw.h from the mainline Linux kernel, the only changes being to the header, and two instances of 'u32' changed to 'uint32_t' to allow it to compile. Checkpatch throws a boatload of errors due to the tab indentation, but I would rather import it as-is than reformat it. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-3-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/usb/dwc2-regs.h | 899 +++++++++++++++++++++++++++++++++++++ 1 file changed, 899 insertions(+) create mode 100644 include/hw/usb/dwc2-regs.h diff --git a/include/hw/usb/dwc2-regs.h b/include/hw/usb/dwc2-regs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/dwc2-regs.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Imported from the Linux kernel file drivers/usb/dwc2/hw.h, commit + * a89bae709b3492b478480a2c9734e7e9393b279c ("usb: dwc2: Move + * UTMI_PHY_DATA defines closer") + * + * hw.h - DesignWare HS OTG Controller hardware definitions + * + * Copyright 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_HW_H__ +#define __DWC2_HW_H__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_CHIRPEN BIT(27) +#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22) +#define GOTGCTL_MULT_VALID_BC_SHIFT 22 +#define GOTGCTL_OTGVER BIT(20) +#define GOTGCTL_BSESVLD BIT(19) +#define GOTGCTL_ASESVLD BIT(18) +#define GOTGCTL_DBNC_SHORT BIT(17) +#define GOTGCTL_CONID_B BIT(16) +#define GOTGCTL_DBNCE_FLTR_BYPASS BIT(15) +#define GOTGCTL_DEVHNPEN BIT(11) +#define GOTGCTL_HSTSETHNPEN BIT(10) +#define GOTGCTL_HNPREQ BIT(9) +#define GOTGCTL_HSTNEGSCS BIT(8) +#define GOTGCTL_SESREQ BIT(1) +#define GOTGCTL_SESREQSCS BIT(0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DBNCE_DONE BIT(19) +#define GOTGINT_A_DEV_TOUT_CHG BIT(18) +#define GOTGINT_HST_NEG_DET BIT(17) +#define GOTGINT_HST_NEG_SUC_STS_CHNG BIT(9) +#define GOTGINT_SES_REQ_SUC_STS_CHNG BIT(8) +#define GOTGINT_SES_END_DET BIT(2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_AHB_SINGLE BIT(23) +#define GAHBCFG_NOTI_ALL_DMA_WRIT BIT(22) +#define GAHBCFG_REM_MEM_SUPP BIT(21) +#define GAHBCFG_P_TXF_EMP_LVL BIT(8) +#define GAHBCFG_NP_TXF_EMP_LVL BIT(7) +#define GAHBCFG_DMA_EN BIT(5) +#define GAHBCFG_HBSTLEN_MASK (0xf << 1) +#define GAHBCFG_HBSTLEN_SHIFT 1 +#define GAHBCFG_HBSTLEN_SINGLE 0 +#define GAHBCFG_HBSTLEN_INCR 1 +#define GAHBCFG_HBSTLEN_INCR4 3 +#define GAHBCFG_HBSTLEN_INCR8 5 +#define GAHBCFG_HBSTLEN_INCR16 7 +#define GAHBCFG_GLBL_INTR_EN BIT(0) +#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \ + GAHBCFG_NP_TXF_EMP_LVL | \ + GAHBCFG_DMA_EN | \ + GAHBCFG_GLBL_INTR_EN) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_FORCEDEVMODE BIT(30) +#define GUSBCFG_FORCEHOSTMODE BIT(29) +#define GUSBCFG_TXENDDELAY BIT(28) +#define GUSBCFG_ICTRAFFICPULLREMOVE BIT(27) +#define GUSBCFG_ICUSBCAP BIT(26) +#define GUSBCFG_ULPI_INT_PROT_DIS BIT(25) +#define GUSBCFG_INDICATORPASSTHROUGH BIT(24) +#define GUSBCFG_INDICATORCOMPLEMENT BIT(23) +#define GUSBCFG_TERMSELDLPULSE BIT(22) +#define GUSBCFG_ULPI_INT_VBUS_IND BIT(21) +#define GUSBCFG_ULPI_EXT_VBUS_DRV BIT(20) +#define GUSBCFG_ULPI_CLK_SUSP_M BIT(19) +#define GUSBCFG_ULPI_AUTO_RES BIT(18) +#define GUSBCFG_ULPI_FS_LS BIT(17) +#define GUSBCFG_OTG_UTMI_FS_SEL BIT(16) +#define GUSBCFG_PHY_LP_CLK_SEL BIT(15) +#define GUSBCFG_USBTRDTIM_MASK (0xf << 10) +#define GUSBCFG_USBTRDTIM_SHIFT 10 +#define GUSBCFG_HNPCAP BIT(9) +#define GUSBCFG_SRPCAP BIT(8) +#define GUSBCFG_DDRSEL BIT(7) +#define GUSBCFG_PHYSEL BIT(6) +#define GUSBCFG_FSINTF BIT(5) +#define GUSBCFG_ULPI_UTMI_SEL BIT(4) +#define GUSBCFG_PHYIF16 BIT(3) +#define GUSBCFG_PHYIF8 (0 << 3) +#define GUSBCFG_TOUTCAL_MASK (0x7 << 0) +#define GUSBCFG_TOUTCAL_SHIFT 0 +#define GUSBCFG_TOUTCAL_LIMIT 0x7 +#define GUSBCFG_TOUTCAL(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) +#define GRSTCTL_AHBIDLE BIT(31) +#define GRSTCTL_DMAREQ BIT(30) +#define GRSTCTL_TXFNUM_MASK (0x1f << 6) +#define GRSTCTL_TXFNUM_SHIFT 6 +#define GRSTCTL_TXFNUM_LIMIT 0x1f +#define GRSTCTL_TXFNUM(_x) ((_x) << 6) +#define GRSTCTL_TXFFLSH BIT(5) +#define GRSTCTL_RXFFLSH BIT(4) +#define GRSTCTL_IN_TKNQ_FLSH BIT(3) +#define GRSTCTL_FRMCNTRRST BIT(2) +#define GRSTCTL_HSFTRST BIT(1) +#define GRSTCTL_CSFTRST BIT(0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) +#define GINTSTS_WKUPINT BIT(31) +#define GINTSTS_SESSREQINT BIT(30) +#define GINTSTS_DISCONNINT BIT(29) +#define GINTSTS_CONIDSTSCHNG BIT(28) +#define GINTSTS_LPMTRANRCVD BIT(27) +#define GINTSTS_PTXFEMP BIT(26) +#define GINTSTS_HCHINT BIT(25) +#define GINTSTS_PRTINT BIT(24) +#define GINTSTS_RESETDET BIT(23) +#define GINTSTS_FET_SUSP BIT(22) +#define GINTSTS_INCOMPL_IP BIT(21) +#define GINTSTS_INCOMPL_SOOUT BIT(21) +#define GINTSTS_INCOMPL_SOIN BIT(20) +#define GINTSTS_OEPINT BIT(19) +#define GINTSTS_IEPINT BIT(18) +#define GINTSTS_EPMIS BIT(17) +#define GINTSTS_RESTOREDONE BIT(16) +#define GINTSTS_EOPF BIT(15) +#define GINTSTS_ISOUTDROP BIT(14) +#define GINTSTS_ENUMDONE BIT(13) +#define GINTSTS_USBRST BIT(12) +#define GINTSTS_USBSUSP BIT(11) +#define GINTSTS_ERLYSUSP BIT(10) +#define GINTSTS_I2CINT BIT(9) +#define GINTSTS_ULPI_CK_INT BIT(8) +#define GINTSTS_GOUTNAKEFF BIT(7) +#define GINTSTS_GINNAKEFF BIT(6) +#define GINTSTS_NPTXFEMP BIT(5) +#define GINTSTS_RXFLVL BIT(4) +#define GINTSTS_SOF BIT(3) +#define GINTSTS_OTGINT BIT(2) +#define GINTSTS_MODEMIS BIT(1) +#define GINTSTS_CURMODE_HOST BIT(0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT 25 +#define GRXSTS_PKTSTS_MASK (0xf << 17) +#define GRXSTS_PKTSTS_SHIFT 17 +#define GRXSTS_PKTSTS_GLOBALOUTNAK 1 +#define GRXSTS_PKTSTS_OUTRX 2 +#define GRXSTS_PKTSTS_HCHIN 2 +#define GRXSTS_PKTSTS_OUTDONE 3 +#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3 +#define GRXSTS_PKTSTS_SETUPDONE 4 +#define GRXSTS_PKTSTS_DATATOGGLEERR 5 +#define GRXSTS_PKTSTS_SETUPRX 6 +#define GRXSTS_PKTSTS_HCHHALTED 7 +#define GRXSTS_HCHNUM_MASK (0xf << 0) +#define GRXSTS_HCHNUM_SHIFT 0 +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT 15 +#define GRXSTS_BYTECNT_MASK (0x7ff << 4) +#define GRXSTS_BYTECNT_SHIFT 4 +#define GRXSTS_EPNUM_MASK (0xf << 0) +#define GRXSTS_EPNUM_SHIFT 0 + +#define GRXFSIZ HSOTG_REG(0x024) +#define GRXFSIZ_DEPTH_MASK (0xffff << 0) +#define GRXFSIZ_DEPTH_SHIFT 0 + +#define GNPTXFSIZ HSOTG_REG(0x028) +/* Use FIFOSIZE_* constants to access this register */ + +#define GNPTXSTS HSOTG_REG(0x02C) +#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24) +#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16) +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0 +#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff) + +#define GI2CCTL HSOTG_REG(0x0030) +#define GI2CCTL_BSYDNE BIT(31) +#define GI2CCTL_RW BIT(30) +#define GI2CCTL_I2CDATSE0 BIT(28) +#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26) +#define GI2CCTL_I2CDEVADDR_SHIFT 26 +#define GI2CCTL_I2CSUSPCTL BIT(25) +#define GI2CCTL_ACK BIT(24) +#define GI2CCTL_I2CEN BIT(23) +#define GI2CCTL_ADDR_MASK (0x7f << 16) +#define GI2CCTL_ADDR_SHIFT 16 +#define GI2CCTL_REGADDR_MASK (0xff << 8) +#define GI2CCTL_REGADDR_SHIFT 8 +#define GI2CCTL_RWDATA_MASK (0xff << 0) +#define GI2CCTL_RWDATA_SHIFT 0 + +#define GPVNDCTL HSOTG_REG(0x0034) +#define GGPIO HSOTG_REG(0x0038) +#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16) + +#define GUID HSOTG_REG(0x003c) +#define GSNPSID HSOTG_REG(0x0040) +#define GHWCFG1 HSOTG_REG(0x0044) +#define GSNPSID_ID_MASK GENMASK(31, 16) + +#define GHWCFG2 HSOTG_REG(0x0048) +#define GHWCFG2_OTG_ENABLE_IC_USB BIT(31) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26 +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24) +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24 +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22) +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22 +#define GHWCFG2_MULTI_PROC_INT BIT(20) +#define GHWCFG2_DYNAMIC_FIFO BIT(19) +#define GHWCFG2_PERIO_EP_SUPPORTED BIT(18) +#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14) +#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14 +#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10) +#define GHWCFG2_NUM_DEV_EP_SHIFT 10 +#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHIFT 8 +#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_FS_PHY_TYPE_DEDICATED 1 +#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI 2 +#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI 3 +#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6) +#define GHWCFG2_HS_PHY_TYPE_SHIFT 6 +#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_HS_PHY_TYPE_UTMI 1 +#define GHWCFG2_HS_PHY_TYPE_ULPI 2 +#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 +#define GHWCFG2_POINT2POINT BIT(5) +#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3) +#define GHWCFG2_ARCHITECTURE_SHIFT 3 +#define GHWCFG2_SLAVE_ONLY_ARCH 0 +#define GHWCFG2_EXT_DMA_ARCH 1 +#define GHWCFG2_INT_DMA_ARCH 2 +#define GHWCFG2_OP_MODE_MASK (0x7 << 0) +#define GHWCFG2_OP_MODE_SHIFT 0 +#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE 0 +#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE 1 +#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE 2 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 +#define GHWCFG2_OP_MODE_UNDEFINED 7 + +#define GHWCFG3 HSOTG_REG(0x004c) +#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16) +#define GHWCFG3_DFIFO_DEPTH_SHIFT 16 +#define GHWCFG3_OTG_LPM_EN BIT(15) +#define GHWCFG3_BC_SUPPORT BIT(14) +#define GHWCFG3_OTG_ENABLE_HSIC BIT(13) +#define GHWCFG3_ADP_SUPP BIT(12) +#define GHWCFG3_SYNCH_RESET_TYPE BIT(11) +#define GHWCFG3_OPTIONAL_FEATURES BIT(10) +#define GHWCFG3_VENDOR_CTRL_IF BIT(9) +#define GHWCFG3_I2C BIT(8) +#define GHWCFG3_OTG_FUNC BIT(7) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4 +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0) +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0 + +#define GHWCFG4 HSOTG_REG(0x0050) +#define GHWCFG4_DESC_DMA_DYN BIT(31) +#define GHWCFG4_DESC_DMA BIT(30) +#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26) +#define GHWCFG4_NUM_IN_EPS_SHIFT 26 +#define GHWCFG4_DED_FIFO_EN BIT(25) +#define GHWCFG4_DED_FIFO_SHIFT 25 +#define GHWCFG4_SESSION_END_FILT_EN BIT(24) +#define GHWCFG4_B_VALID_FILT_EN BIT(23) +#define GHWCFG4_A_VALID_FILT_EN BIT(22) +#define GHWCFG4_VBUS_VALID_FILT_EN BIT(21) +#define GHWCFG4_IDDIG_FILT_EN BIT(20) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2 +#define GHWCFG4_ACG_SUPPORTED BIT(12) +#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11) +#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED BIT(10) +#define GHWCFG4_XHIBER BIT(7) +#define GHWCFG4_HIBER BIT(6) +#define GHWCFG4_MIN_AHB_FREQ BIT(5) +#define GHWCFG4_POWER_OPTIMIZ BIT(4) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0 + +#define GLPMCFG HSOTG_REG(0x0054) +#define GLPMCFG_INVSELHSIC BIT(31) +#define GLPMCFG_HSICCON BIT(30) +#define GLPMCFG_RSTRSLPSTS BIT(29) +#define GLPMCFG_ENBESL BIT(28) +#define GLPMCFG_LPM_RETRYCNT_STS_MASK (0x7 << 25) +#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT 25 +#define GLPMCFG_SNDLPM BIT(24) +#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21) +#define GLPMCFG_RETRY_CNT_SHIFT 21 +#define GLPMCFG_LPM_REJECT_CTRL_CONTROL BIT(21) +#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) +#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17) +#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17 +#define GLPMCFG_L1RESUMEOK BIT(16) +#define GLPMCFG_SLPSTS BIT(15) +#define GLPMCFG_COREL1RES_MASK (0x3 << 13) +#define GLPMCFG_COREL1RES_SHIFT 13 +#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8) +#define GLPMCFG_HIRD_THRES_SHIFT 8 +#define GLPMCFG_HIRD_THRES_EN (0x10 << 8) +#define GLPMCFG_ENBLSLPM BIT(7) +#define GLPMCFG_BREMOTEWAKE BIT(6) +#define GLPMCFG_HIRD_MASK (0xf << 2) +#define GLPMCFG_HIRD_SHIFT 2 +#define GLPMCFG_APPL1RES BIT(1) +#define GLPMCFG_LPMCAP BIT(0) + +#define GPWRDN HSOTG_REG(0x0058) +#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24) +#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24 +#define GPWRDN_ADP_INT BIT(23) +#define GPWRDN_BSESSVLD BIT(22) +#define GPWRDN_IDSTS BIT(21) +#define GPWRDN_LINESTATE_MASK (0x3 << 19) +#define GPWRDN_LINESTATE_SHIFT 19 +#define GPWRDN_STS_CHGINT_MSK BIT(18) +#define GPWRDN_STS_CHGINT BIT(17) +#define GPWRDN_SRP_DET_MSK BIT(16) +#define GPWRDN_SRP_DET BIT(15) +#define GPWRDN_CONNECT_DET_MSK BIT(14) +#define GPWRDN_CONNECT_DET BIT(13) +#define GPWRDN_DISCONN_DET_MSK BIT(12) +#define GPWRDN_DISCONN_DET BIT(11) +#define GPWRDN_RST_DET_MSK BIT(10) +#define GPWRDN_RST_DET BIT(9) +#define GPWRDN_LNSTSCHG_MSK BIT(8) +#define GPWRDN_LNSTSCHG BIT(7) +#define GPWRDN_DIS_VBUS BIT(6) +#define GPWRDN_PWRDNSWTCH BIT(5) +#define GPWRDN_PWRDNRSTN BIT(4) +#define GPWRDN_PWRDNCLMP BIT(3) +#define GPWRDN_RESTORE BIT(2) +#define GPWRDN_PMUACTV BIT(1) +#define GPWRDN_PMUINTSEL BIT(0) + +#define GDFIFOCFG HSOTG_REG(0x005c) +#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16) +#define GDFIFOCFG_EPINFOBASE_SHIFT 16 +#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0) +#define GDFIFOCFG_GDFIFOCFG_SHIFT 0 + +#define ADPCTL HSOTG_REG(0x0060) +#define ADPCTL_AR_MASK (0x3 << 27) +#define ADPCTL_AR_SHIFT 27 +#define ADPCTL_ADP_TMOUT_INT_MSK BIT(26) +#define ADPCTL_ADP_SNS_INT_MSK BIT(25) +#define ADPCTL_ADP_PRB_INT_MSK BIT(24) +#define ADPCTL_ADP_TMOUT_INT BIT(23) +#define ADPCTL_ADP_SNS_INT BIT(22) +#define ADPCTL_ADP_PRB_INT BIT(21) +#define ADPCTL_ADPENA BIT(20) +#define ADPCTL_ADPRES BIT(19) +#define ADPCTL_ENASNS BIT(18) +#define ADPCTL_ENAPRB BIT(17) +#define ADPCTL_RTIM_MASK (0x7ff << 6) +#define ADPCTL_RTIM_SHIFT 6 +#define ADPCTL_PRB_PER_MASK (0x3 << 4) +#define ADPCTL_PRB_PER_SHIFT 4 +#define ADPCTL_PRB_DELTA_MASK (0x3 << 2) +#define ADPCTL_PRB_DELTA_SHIFT 2 +#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0) +#define ADPCTL_PRB_DSCHRG_SHIFT 0 + +#define GREFCLK HSOTG_REG(0x0064) +#define GREFCLK_REFCLKPER_MASK (0x1ffff << 15) +#define GREFCLK_REFCLKPER_SHIFT 15 +#define GREFCLK_REF_CLK_MODE BIT(14) +#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK (0x3ff) +#define GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT 0 + +#define GINTMSK2 HSOTG_REG(0x0068) +#define GINTMSK2_WKUP_ALERT_INT_MSK BIT(0) + +#define GINTSTS2 HSOTG_REG(0x006c) +#define GINTSTS2_WKUP_ALERT_INT BIT(0) + +#define HPTXFSIZ HSOTG_REG(0x100) +/* Use FIFOSIZE_* constants to access this register */ + +#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) +/* Use FIFOSIZE_* constants to access this register */ + +/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */ +#define FIFOSIZE_DEPTH_MASK (0xffff << 16) +#define FIFOSIZE_DEPTH_SHIFT 16 +#define FIFOSIZE_STARTADDR_MASK (0xffff << 0) +#define FIFOSIZE_STARTADDR_SHIFT 0 +#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff) + +/* Device mode registers */ + +#define DCFG HSOTG_REG(0x800) +#define DCFG_DESCDMA_EN BIT(23) +#define DCFG_EPMISCNT_MASK (0x1f << 18) +#define DCFG_EPMISCNT_SHIFT 18 +#define DCFG_EPMISCNT_LIMIT 0x1f +#define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_IPG_ISOC_SUPPORDED BIT(17) +#define DCFG_PERFRINT_MASK (0x3 << 11) +#define DCFG_PERFRINT_SHIFT 11 +#define DCFG_PERFRINT_LIMIT 0x3 +#define DCFG_PERFRINT(_x) ((_x) << 11) +#define DCFG_DEVADDR_MASK (0x7f << 4) +#define DCFG_DEVADDR_SHIFT 4 +#define DCFG_DEVADDR_LIMIT 0x7f +#define DCFG_DEVADDR(_x) ((_x) << 4) +#define DCFG_NZ_STS_OUT_HSHK BIT(2) +#define DCFG_DEVSPD_MASK (0x3 << 0) +#define DCFG_DEVSPD_SHIFT 0 +#define DCFG_DEVSPD_HS 0 +#define DCFG_DEVSPD_FS 1 +#define DCFG_DEVSPD_LS 2 +#define DCFG_DEVSPD_FS48 3 + +#define DCTL HSOTG_REG(0x804) +#define DCTL_SERVICE_INTERVAL_SUPPORTED BIT(19) +#define DCTL_PWRONPRGDONE BIT(11) +#define DCTL_CGOUTNAK BIT(10) +#define DCTL_SGOUTNAK BIT(9) +#define DCTL_CGNPINNAK BIT(8) +#define DCTL_SGNPINNAK BIT(7) +#define DCTL_TSTCTL_MASK (0x7 << 4) +#define DCTL_TSTCTL_SHIFT 4 +#define DCTL_GOUTNAKSTS BIT(3) +#define DCTL_GNPINNAKSTS BIT(2) +#define DCTL_SFTDISCON BIT(1) +#define DCTL_RMTWKUPSIG BIT(0) + +#define DSTS HSOTG_REG(0x808) +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT 8 +#define DSTS_SOFFN_LIMIT 0x3fff +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ERRATICERR BIT(3) +#define DSTS_ENUMSPD_MASK (0x3 << 1) +#define DSTS_ENUMSPD_SHIFT 1 +#define DSTS_ENUMSPD_HS 0 +#define DSTS_ENUMSPD_FS 1 +#define DSTS_ENUMSPD_LS 2 +#define DSTS_ENUMSPD_FS48 3 +#define DSTS_SUSPSTS BIT(0) + +#define DIEPMSK HSOTG_REG(0x810) +#define DIEPMSK_NAKMSK BIT(13) +#define DIEPMSK_BNAININTRMSK BIT(9) +#define DIEPMSK_TXFIFOUNDRNMSK BIT(8) +#define DIEPMSK_TXFIFOEMPTY BIT(7) +#define DIEPMSK_INEPNAKEFFMSK BIT(6) +#define DIEPMSK_INTKNEPMISMSK BIT(5) +#define DIEPMSK_INTKNTXFEMPMSK BIT(4) +#define DIEPMSK_TIMEOUTMSK BIT(3) +#define DIEPMSK_AHBERRMSK BIT(2) +#define DIEPMSK_EPDISBLDMSK BIT(1) +#define DIEPMSK_XFERCOMPLMSK BIT(0) + +#define DOEPMSK HSOTG_REG(0x814) +#define DOEPMSK_BNAMSK BIT(9) +#define DOEPMSK_BACK2BACKSETUP BIT(6) +#define DOEPMSK_STSPHSERCVDMSK BIT(5) +#define DOEPMSK_OUTTKNEPDISMSK BIT(4) +#define DOEPMSK_SETUPMSK BIT(3) +#define DOEPMSK_AHBERRMSK BIT(2) +#define DOEPMSK_EPDISBLDMSK BIT(1) +#define DOEPMSK_XFERCOMPLMSK BIT(0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) +#define DAINT_OUTEP_SHIFT 16 +#define DAINT_OUTEP(_x) (1 << ((_x) + 16)) +#define DAINT_INEP(_x) (1 << (_x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) +#define DIEPEMPMSK HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) + +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting different for EP0 + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT 0 +#define D0EPCTL_MPS_64 0 +#define D0EPCTL_MPS_32 1 +#define D0EPCTL_MPS_16 2 +#define D0EPCTL_MPS_8 3 + +#define DXEPCTL_EPENA BIT(31) +#define DXEPCTL_EPDIS BIT(30) +#define DXEPCTL_SETD1PID BIT(29) +#define DXEPCTL_SETODDFR BIT(29) +#define DXEPCTL_SETD0PID BIT(28) +#define DXEPCTL_SETEVENFR BIT(28) +#define DXEPCTL_SNAK BIT(27) +#define DXEPCTL_CNAK BIT(26) +#define DXEPCTL_TXFNUM_MASK (0xf << 22) +#define DXEPCTL_TXFNUM_SHIFT 22 +#define DXEPCTL_TXFNUM_LIMIT 0xf +#define DXEPCTL_TXFNUM(_x) ((_x) << 22) +#define DXEPCTL_STALL BIT(21) +#define DXEPCTL_SNP BIT(20) +#define DXEPCTL_EPTYPE_MASK (0x3 << 18) +#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18) +#define DXEPCTL_EPTYPE_ISO (0x1 << 18) +#define DXEPCTL_EPTYPE_BULK (0x2 << 18) +#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18) + +#define DXEPCTL_NAKSTS BIT(17) +#define DXEPCTL_DPID BIT(16) +#define DXEPCTL_EOFRNUM BIT(16) +#define DXEPCTL_USBACTEP BIT(15) +#define DXEPCTL_NEXTEP_MASK (0xf << 11) +#define DXEPCTL_NEXTEP_SHIFT 11 +#define DXEPCTL_NEXTEP_LIMIT 0xf +#define DXEPCTL_NEXTEP(_x) ((_x) << 11) +#define DXEPCTL_MPS_MASK (0x7ff << 0) +#define DXEPCTL_MPS_SHIFT 0 +#define DXEPCTL_MPS_LIMIT 0x7ff +#define DXEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) +#define DXEPINT_SETUP_RCVD BIT(15) +#define DXEPINT_NYETINTRPT BIT(14) +#define DXEPINT_NAKINTRPT BIT(13) +#define DXEPINT_BBLEERRINTRPT BIT(12) +#define DXEPINT_PKTDRPSTS BIT(11) +#define DXEPINT_BNAINTR BIT(9) +#define DXEPINT_TXFIFOUNDRN BIT(8) +#define DXEPINT_OUTPKTERR BIT(8) +#define DXEPINT_TXFEMP BIT(7) +#define DXEPINT_INEPNAKEFF BIT(6) +#define DXEPINT_BACK2BACKSETUP BIT(6) +#define DXEPINT_INTKNEPMIS BIT(5) +#define DXEPINT_STSPHSERCVD BIT(5) +#define DXEPINT_INTKNTXFEMP BIT(4) +#define DXEPINT_OUTTKNEPDIS BIT(4) +#define DXEPINT_TIMEOUT BIT(3) +#define DXEPINT_SETUP BIT(3) +#define DXEPINT_AHBERR BIT(2) +#define DXEPINT_EPDISBLD BIT(1) +#define DXEPINT_XFERCOMPL BIT(0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) +#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19) +#define DIEPTSIZ0_PKTCNT_SHIFT 19 +#define DIEPTSIZ0_PKTCNT_LIMIT 0x3 +#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19) +#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DIEPTSIZ0_XFERSIZE_SHIFT 0 +#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f +#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCNT_SHIFT 29 +#define DOEPTSIZ0_SUPCNT_LIMIT 0x3 +#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29) +#define DOEPTSIZ0_PKTCNT BIT(19) +#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DOEPTSIZ0_XFERSIZE_SHIFT 0 + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) +#define DXEPTSIZ_MC_MASK (0x3 << 29) +#define DXEPTSIZ_MC_SHIFT 29 +#define DXEPTSIZ_MC_LIMIT 0x3 +#define DXEPTSIZ_MC(_x) ((_x) << 29) +#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19) +#define DXEPTSIZ_PKTCNT_SHIFT 19 +#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff +#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff) +#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19) +#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define DXEPTSIZ_XFERSIZE_SHIFT 0 +#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff +#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) + +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define PCGCTL HSOTG_REG(0x0e00) +#define PCGCTL_IF_DEV_MODE BIT(31) +#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29) +#define PCGCTL_P2HD_PRT_SPD_SHIFT 29 +#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27) +#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 +#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20) +#define PCGCTL_MAC_DEV_ADDR_SHIFT 20 +#define PCGCTL_MAX_TERMSEL BIT(19) +#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17) +#define PCGCTL_MAX_XCVRSELECT_SHIFT 17 +#define PCGCTL_PORT_POWER BIT(16) +#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14) +#define PCGCTL_PRT_CLK_SEL_SHIFT 14 +#define PCGCTL_ESS_REG_RESTORED BIT(13) +#define PCGCTL_EXTND_HIBER_SWITCH BIT(12) +#define PCGCTL_EXTND_HIBER_PWRCLMP BIT(11) +#define PCGCTL_ENBL_EXTND_HIBER BIT(10) +#define PCGCTL_RESTOREMODE BIT(9) +#define PCGCTL_RESETAFTSUSP BIT(8) +#define PCGCTL_DEEP_SLEEP BIT(7) +#define PCGCTL_PHY_IN_SLEEP BIT(6) +#define PCGCTL_ENBL_SLEEP_GATING BIT(5) +#define PCGCTL_RSTPDWNMODULE BIT(3) +#define PCGCTL_PWRCLMP BIT(2) +#define PCGCTL_GATEHCLK BIT(1) +#define PCGCTL_STOPPCLK BIT(0) + +#define PCGCCTL1 HSOTG_REG(0xe04) +#define PCGCCTL1_TIMER (0x3 << 1) +#define PCGCCTL1_GATEEN BIT(0) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +/* Host Mode Registers */ + +#define HCFG HSOTG_REG(0x0400) +#define HCFG_MODECHTIMEN BIT(31) +#define HCFG_PERSCHEDENA BIT(26) +#define HCFG_FRLISTEN_MASK (0x3 << 24) +#define HCFG_FRLISTEN_SHIFT 24 +#define HCFG_FRLISTEN_8 (0 << 24) +#define FRLISTEN_8_SIZE 8 +#define HCFG_FRLISTEN_16 BIT(24) +#define FRLISTEN_16_SIZE 16 +#define HCFG_FRLISTEN_32 (2 << 24) +#define FRLISTEN_32_SIZE 32 +#define HCFG_FRLISTEN_64 (3 << 24) +#define FRLISTEN_64_SIZE 64 +#define HCFG_DESCDMA BIT(23) +#define HCFG_RESVALID_MASK (0xff << 8) +#define HCFG_RESVALID_SHIFT 8 +#define HCFG_ENA32KHZ BIT(7) +#define HCFG_FSLSSUPP BIT(2) +#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0) +#define HCFG_FSLSPCLKSEL_SHIFT 0 +#define HCFG_FSLSPCLKSEL_30_60_MHZ 0 +#define HCFG_FSLSPCLKSEL_48_MHZ 1 +#define HCFG_FSLSPCLKSEL_6_MHZ 2 + +#define HFIR HSOTG_REG(0x0404) +#define HFIR_FRINT_MASK (0xffff << 0) +#define HFIR_FRINT_SHIFT 0 +#define HFIR_RLDCTRL BIT(16) + +#define HFNUM HSOTG_REG(0x0408) +#define HFNUM_FRREM_MASK (0xffff << 16) +#define HFNUM_FRREM_SHIFT 16 +#define HFNUM_FRNUM_MASK (0xffff << 0) +#define HFNUM_FRNUM_SHIFT 0 +#define HFNUM_MAX_FRNUM 0x3fff + +#define HPTXSTS HSOTG_REG(0x0410) +#define TXSTS_QTOP_ODD BIT(31) +#define TXSTS_QTOP_CHNEP_MASK (0xf << 27) +#define TXSTS_QTOP_CHNEP_SHIFT 27 +#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25) +#define TXSTS_QTOP_TOKEN_SHIFT 25 +#define TXSTS_QTOP_TERMINATE BIT(24) +#define TXSTS_QSPCAVAIL_MASK (0xff << 16) +#define TXSTS_QSPCAVAIL_SHIFT 16 +#define TXSTS_FSPCAVAIL_MASK (0xffff << 0) +#define TXSTS_FSPCAVAIL_SHIFT 0 + +#define HAINT HSOTG_REG(0x0414) +#define HAINTMSK HSOTG_REG(0x0418) +#define HFLBADDR HSOTG_REG(0x041c) + +#define HPRT0 HSOTG_REG(0x0440) +#define HPRT0_SPD_MASK (0x3 << 17) +#define HPRT0_SPD_SHIFT 17 +#define HPRT0_SPD_HIGH_SPEED 0 +#define HPRT0_SPD_FULL_SPEED 1 +#define HPRT0_SPD_LOW_SPEED 2 +#define HPRT0_TSTCTL_MASK (0xf << 13) +#define HPRT0_TSTCTL_SHIFT 13 +#define HPRT0_PWR BIT(12) +#define HPRT0_LNSTS_MASK (0x3 << 10) +#define HPRT0_LNSTS_SHIFT 10 +#define HPRT0_RST BIT(8) +#define HPRT0_SUSP BIT(7) +#define HPRT0_RES BIT(6) +#define HPRT0_OVRCURRCHG BIT(5) +#define HPRT0_OVRCURRACT BIT(4) +#define HPRT0_ENACHG BIT(3) +#define HPRT0_ENA BIT(2) +#define HPRT0_CONNDET BIT(1) +#define HPRT0_CONNSTS BIT(0) + +#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch)) +#define HCCHAR_CHENA BIT(31) +#define HCCHAR_CHDIS BIT(30) +#define HCCHAR_ODDFRM BIT(29) +#define HCCHAR_DEVADDR_MASK (0x7f << 22) +#define HCCHAR_DEVADDR_SHIFT 22 +#define HCCHAR_MULTICNT_MASK (0x3 << 20) +#define HCCHAR_MULTICNT_SHIFT 20 +#define HCCHAR_EPTYPE_MASK (0x3 << 18) +#define HCCHAR_EPTYPE_SHIFT 18 +#define HCCHAR_LSPDDEV BIT(17) +#define HCCHAR_EPDIR BIT(15) +#define HCCHAR_EPNUM_MASK (0xf << 11) +#define HCCHAR_EPNUM_SHIFT 11 +#define HCCHAR_MPS_MASK (0x7ff << 0) +#define HCCHAR_MPS_SHIFT 0 + +#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch)) +#define HCSPLT_SPLTENA BIT(31) +#define HCSPLT_COMPSPLT BIT(16) +#define HCSPLT_XACTPOS_MASK (0x3 << 14) +#define HCSPLT_XACTPOS_SHIFT 14 +#define HCSPLT_XACTPOS_MID 0 +#define HCSPLT_XACTPOS_END 1 +#define HCSPLT_XACTPOS_BEGIN 2 +#define HCSPLT_XACTPOS_ALL 3 +#define HCSPLT_HUBADDR_MASK (0x7f << 7) +#define HCSPLT_HUBADDR_SHIFT 7 +#define HCSPLT_PRTADDR_MASK (0x7f << 0) +#define HCSPLT_PRTADDR_SHIFT 0 + +#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch)) +#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch)) +#define HCINTMSK_RESERVED14_31 (0x3ffff << 14) +#define HCINTMSK_FRM_LIST_ROLL BIT(13) +#define HCINTMSK_XCS_XACT BIT(12) +#define HCINTMSK_BNA BIT(11) +#define HCINTMSK_DATATGLERR BIT(10) +#define HCINTMSK_FRMOVRUN BIT(9) +#define HCINTMSK_BBLERR BIT(8) +#define HCINTMSK_XACTERR BIT(7) +#define HCINTMSK_NYET BIT(6) +#define HCINTMSK_ACK BIT(5) +#define HCINTMSK_NAK BIT(4) +#define HCINTMSK_STALL BIT(3) +#define HCINTMSK_AHBERR BIT(2) +#define HCINTMSK_CHHLTD BIT(1) +#define HCINTMSK_XFERCOMPL BIT(0) + +#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch)) +#define TSIZ_DOPNG BIT(31) +#define TSIZ_SC_MC_PID_MASK (0x3 << 29) +#define TSIZ_SC_MC_PID_SHIFT 29 +#define TSIZ_SC_MC_PID_DATA0 0 +#define TSIZ_SC_MC_PID_DATA2 1 +#define TSIZ_SC_MC_PID_DATA1 2 +#define TSIZ_SC_MC_PID_MDATA 3 +#define TSIZ_SC_MC_PID_SETUP 3 +#define TSIZ_PKTCNT_MASK (0x3ff << 19) +#define TSIZ_PKTCNT_SHIFT 19 +#define TSIZ_NTD_MASK (0xff << 8) +#define TSIZ_NTD_SHIFT 8 +#define TSIZ_SCHINFO_MASK (0xff << 0) +#define TSIZ_SCHINFO_SHIFT 0 +#define TSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define TSIZ_XFERSIZE_SHIFT 0 + +#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch)) + +#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch)) + +#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch)) + +/** + * struct dwc2_dma_desc - DMA descriptor structure, + * used for both host and gadget modes + * + * @status: DMA descriptor status quadlet + * @buf: DMA descriptor data buffer pointer + * + * DMA Descriptor structure contains two quadlets: + * Status quadlet and Data buffer pointer. + */ +struct dwc2_dma_desc { + uint32_t status; + uint32_t buf; +} __packed; + +/* Host Mode DMA descriptor status quadlet */ + +#define HOST_DMA_A BIT(31) +#define HOST_DMA_STS_MASK (0x3 << 28) +#define HOST_DMA_STS_SHIFT 28 +#define HOST_DMA_STS_PKTERR BIT(28) +#define HOST_DMA_EOL BIT(26) +#define HOST_DMA_IOC BIT(25) +#define HOST_DMA_SUP BIT(24) +#define HOST_DMA_ALT_QTD BIT(23) +#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17) +#define HOST_DMA_QTD_OFFSET_SHIFT 17 +#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0) +#define HOST_DMA_ISOC_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_MASK (0x1ffff << 0) +#define HOST_DMA_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_LIMIT 131071 + +/* Device Mode DMA descriptor status quadlet */ + +#define DEV_DMA_BUFF_STS_MASK (0x3 << 30) +#define DEV_DMA_BUFF_STS_SHIFT 30 +#define DEV_DMA_BUFF_STS_HREADY 0 +#define DEV_DMA_BUFF_STS_DMABUSY 1 +#define DEV_DMA_BUFF_STS_DMADONE 2 +#define DEV_DMA_BUFF_STS_HBUSY 3 +#define DEV_DMA_STS_MASK (0x3 << 28) +#define DEV_DMA_STS_SHIFT 28 +#define DEV_DMA_STS_SUCC 0 +#define DEV_DMA_STS_BUFF_FLUSH 1 +#define DEV_DMA_STS_BUFF_ERR 3 +#define DEV_DMA_L BIT(27) +#define DEV_DMA_SHORT BIT(26) +#define DEV_DMA_IOC BIT(25) +#define DEV_DMA_SR BIT(24) +#define DEV_DMA_MTRF BIT(23) +#define DEV_DMA_ISOC_PID_MASK (0x3 << 23) +#define DEV_DMA_ISOC_PID_SHIFT 23 +#define DEV_DMA_ISOC_PID_DATA0 0 +#define DEV_DMA_ISOC_PID_DATA2 1 +#define DEV_DMA_ISOC_PID_DATA1 2 +#define DEV_DMA_ISOC_PID_MDATA 3 +#define DEV_DMA_ISOC_FRNUM_MASK (0x7ff << 12) +#define DEV_DMA_ISOC_FRNUM_SHIFT 12 +#define DEV_DMA_ISOC_TX_NBYTES_MASK (0xfff << 0) +#define DEV_DMA_ISOC_TX_NBYTES_LIMIT 0xfff +#define DEV_DMA_ISOC_RX_NBYTES_MASK (0x7ff << 0) +#define DEV_DMA_ISOC_RX_NBYTES_LIMIT 0x7ff +#define DEV_DMA_ISOC_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_MASK (0xffff << 0) +#define DEV_DMA_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_LIMIT 0xffff + +#define MAX_DMA_DESC_NUM_GENERIC 64 +#define MAX_DMA_DESC_NUM_HS_ISOC 256 + +#endif /* __DWC2_HW_H__ */ -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add the dwc-hsotg (dwc2) USB host controller state definitions. Mostly based on hw/usb/hcd-ehci.h. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-4-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-dwc2.h | 190 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 hw/usb/hcd-dwc2.h diff --git a/hw/usb/hcd-dwc2.h b/hw/usb/hcd-dwc2.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc2.h @@ -XXX,XX +XXX,XX @@ +/* + * dwc-hsotg (dwc2) USB host controller state definitions + * + * Based on hw/usb/hcd-ehci.h + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HW_USB_DWC2_H +#define HW_USB_DWC2_H + +#include "qemu/timer.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "hw/usb.h" +#include "sysemu/dma.h" + +#define DWC2_MMIO_SIZE 0x11000 + +#define DWC2_NB_CHAN 8 /* Number of host channels */ +#define DWC2_MAX_XFER_SIZE 65536 /* Max transfer size expected in HCTSIZ */ + +typedef struct DWC2Packet DWC2Packet; +typedef struct DWC2State DWC2State; +typedef struct DWC2Class DWC2Class; + +enum async_state { + DWC2_ASYNC_NONE = 0, + DWC2_ASYNC_INITIALIZED, + DWC2_ASYNC_INFLIGHT, + DWC2_ASYNC_FINISHED, +}; + +struct DWC2Packet { + USBPacket packet; + uint32_t devadr; + uint32_t epnum; + uint32_t epdir; + uint32_t mps; + uint32_t pid; + uint32_t index; + uint32_t pcnt; + uint32_t len; + int32_t async; + bool small; + bool needs_service; +}; + +struct DWC2State { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + USBBus bus; + qemu_irq irq; + MemoryRegion *dma_mr; + AddressSpace dma_as; + MemoryRegion container; + MemoryRegion hsotg; + MemoryRegion fifos; + + union { +#define DWC2_GLBREG_SIZE 0x70 + uint32_t glbreg[DWC2_GLBREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t gotgctl; /* 00 */ + uint32_t gotgint; /* 04 */ + uint32_t gahbcfg; /* 08 */ + uint32_t gusbcfg; /* 0c */ + uint32_t grstctl; /* 10 */ + uint32_t gintsts; /* 14 */ + uint32_t gintmsk; /* 18 */ + uint32_t grxstsr; /* 1c */ + uint32_t grxstsp; /* 20 */ + uint32_t grxfsiz; /* 24 */ + uint32_t gnptxfsiz; /* 28 */ + uint32_t gnptxsts; /* 2c */ + uint32_t gi2cctl; /* 30 */ + uint32_t gpvndctl; /* 34 */ + uint32_t ggpio; /* 38 */ + uint32_t guid; /* 3c */ + uint32_t gsnpsid; /* 40 */ + uint32_t ghwcfg1; /* 44 */ + uint32_t ghwcfg2; /* 48 */ + uint32_t ghwcfg3; /* 4c */ + uint32_t ghwcfg4; /* 50 */ + uint32_t glpmcfg; /* 54 */ + uint32_t gpwrdn; /* 58 */ + uint32_t gdfifocfg; /* 5c */ + uint32_t gadpctl; /* 60 */ + uint32_t grefclk; /* 64 */ + uint32_t gintmsk2; /* 68 */ + uint32_t gintsts2; /* 6c */ + }; + }; + + union { +#define DWC2_FSZREG_SIZE 0x04 + uint32_t fszreg[DWC2_FSZREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t hptxfsiz; /* 100 */ + }; + }; + + union { +#define DWC2_HREG0_SIZE 0x44 + uint32_t hreg0[DWC2_HREG0_SIZE / sizeof(uint32_t)]; + struct { + uint32_t hcfg; /* 400 */ + uint32_t hfir; /* 404 */ + uint32_t hfnum; /* 408 */ + uint32_t rsvd0; /* 40c */ + uint32_t hptxsts; /* 410 */ + uint32_t haint; /* 414 */ + uint32_t haintmsk; /* 418 */ + uint32_t hflbaddr; /* 41c */ + uint32_t rsvd1[8]; /* 420-43c */ + uint32_t hprt0; /* 440 */ + }; + }; + +#define DWC2_HREG1_SIZE (0x20 * DWC2_NB_CHAN) + uint32_t hreg1[DWC2_HREG1_SIZE / sizeof(uint32_t)]; + +#define hcchar(_ch) hreg1[((_ch) << 3) + 0] /* 500, 520, ... */ +#define hcsplt(_ch) hreg1[((_ch) << 3) + 1] /* 504, 524, ... */ +#define hcint(_ch) hreg1[((_ch) << 3) + 2] /* 508, 528, ... */ +#define hcintmsk(_ch) hreg1[((_ch) << 3) + 3] /* 50c, 52c, ... */ +#define hctsiz(_ch) hreg1[((_ch) << 3) + 4] /* 510, 530, ... */ +#define hcdma(_ch) hreg1[((_ch) << 3) + 5] /* 514, 534, ... */ +#define hcdmab(_ch) hreg1[((_ch) << 3) + 7] /* 51c, 53c, ... */ + + union { +#define DWC2_PCGREG_SIZE 0x08 + uint32_t pcgreg[DWC2_PCGREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t pcgctl; /* e00 */ + uint32_t pcgcctl1; /* e04 */ + }; + }; + + /* TODO - implement FIFO registers for slave mode */ +#define DWC2_HFIFO_SIZE (0x1000 * DWC2_NB_CHAN) + + /* + * Internal state + */ + QEMUTimer *eof_timer; + QEMUTimer *frame_timer; + QEMUBH *async_bh; + int64_t sof_time; + int64_t usb_frame_time; + int64_t usb_bit_time; + uint32_t usb_version; + uint16_t frame_number; + uint16_t fi; + uint16_t next_chan; + bool working; + USBPort uport; + DWC2Packet packet[DWC2_NB_CHAN]; /* one packet per chan */ + uint8_t usb_buf[DWC2_NB_CHAN][DWC2_MAX_XFER_SIZE]; /* one buffer per chan */ +}; + +struct DWC2Class { + /*< private >*/ + SysBusDeviceClass parent_class; + ResettablePhases parent_phases; + + /*< public >*/ +}; + +#define TYPE_DWC2_USB "dwc2-usb" +#define DWC2_USB(obj) \ + OBJECT_CHECK(DWC2State, (obj), TYPE_DWC2_USB) +#define DWC2_CLASS(klass) \ + OBJECT_CLASS_CHECK(DWC2Class, (klass), TYPE_DWC2_USB) +#define DWC2_GET_CLASS(obj) \ + OBJECT_GET_CLASS(DWC2Class, (obj), TYPE_DWC2_USB) + +#endif -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add the dwc-hsotg (dwc2) USB host controller emulation code. Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c. Note that to use this with the dwc-otg driver in the Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on the kernel command line. Emulation of slave mode and of descriptor-DMA mode has not been implemented yet. These modes are seldom used. I have used some on-line sources of information while developing this emulation, including: http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf which has a pretty complete description of the controller starting on page 370. https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf which has a description of the controller registers starting on page 130. Thanks to Felippe Mathieu-Daude for providing a cleaner method of implementing the memory regions for the controller registers. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-5-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++++++++++++ hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/trace-events | 50 ++ 4 files changed, 1473 insertions(+) create mode 100644 hw/usb/hcd-dwc2.c diff --git a/hw/usb/hcd-dwc2.c b/hw/usb/hcd-dwc2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc2.c @@ -XXX,XX +XXX,XX @@ +/* + * dwc-hsotg (dwc2) USB host controller emulation + * + * Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c + * + * Note that to use this emulation with the dwc-otg driver in the + * Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" + * on the kernel command line. + * + * Some useful documentation used to develop this emulation can be + * found online (as of April 2020) at: + * + * http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf + * which has a pretty complete description of the controller starting + * on page 370. + * + * https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf + * which has a description of the controller registers starting on + * page 130. + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "hw/usb/dwc2-regs.h" +#include "hw/usb/hcd-dwc2.h" +#include "migration/vmstate.h" +#include "trace.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "qemu/main-loop.h" +#include "hw/qdev-properties.h" + +#define USB_HZ_FS 12000000 +#define USB_HZ_HS 96000000 +#define USB_FRMINTVL 12000 + +/* nifty macros from Arnon's EHCI version */ +#define get_field(data, field) \ + (((data) & field##_MASK) >> field##_SHIFT) + +#define set_field(data, newval, field) do { \ + uint32_t val = *(data); \ + val &= ~field##_MASK; \ + val |= ((newval) << field##_SHIFT) & field##_MASK; \ + *(data) = val; \ +} while (0) + +#define get_bit(data, bitmask) \ + (!!((data) & (bitmask))) + +/* update irq line */ +static inline void dwc2_update_irq(DWC2State *s) +{ + static int oldlevel; + int level = 0; + + if ((s->gintsts & s->gintmsk) && (s->gahbcfg & GAHBCFG_GLBL_INTR_EN)) { + level = 1; + } + if (level != oldlevel) { + oldlevel = level; + trace_usb_dwc2_update_irq(level); + qemu_set_irq(s->irq, level); + } +} + +/* flag interrupt condition */ +static inline void dwc2_raise_global_irq(DWC2State *s, uint32_t intr) +{ + if (!(s->gintsts & intr)) { + s->gintsts |= intr; + trace_usb_dwc2_raise_global_irq(intr); + dwc2_update_irq(s); + } +} + +static inline void dwc2_lower_global_irq(DWC2State *s, uint32_t intr) +{ + if (s->gintsts & intr) { + s->gintsts &= ~intr; + trace_usb_dwc2_lower_global_irq(intr); + dwc2_update_irq(s); + } +} + +static inline void dwc2_raise_host_irq(DWC2State *s, uint32_t host_intr) +{ + if (!(s->haint & host_intr)) { + s->haint |= host_intr; + s->haint &= 0xffff; + trace_usb_dwc2_raise_host_irq(host_intr); + if (s->haint & s->haintmsk) { + dwc2_raise_global_irq(s, GINTSTS_HCHINT); + } + } +} + +static inline void dwc2_lower_host_irq(DWC2State *s, uint32_t host_intr) +{ + if (s->haint & host_intr) { + s->haint &= ~host_intr; + trace_usb_dwc2_lower_host_irq(host_intr); + if (!(s->haint & s->haintmsk)) { + dwc2_lower_global_irq(s, GINTSTS_HCHINT); + } + } +} + +static inline void dwc2_update_hc_irq(DWC2State *s, int index) +{ + uint32_t host_intr = 1 << (index >> 3); + + if (s->hreg1[index + 2] & s->hreg1[index + 3]) { + dwc2_raise_host_irq(s, host_intr); + } else { + dwc2_lower_host_irq(s, host_intr); + } +} + +/* set a timer for EOF */ +static void dwc2_eof_timer(DWC2State *s) +{ + timer_mod(s->eof_timer, s->sof_time + s->usb_frame_time); +} + +/* Set a timer for EOF and generate SOF event */ +static void dwc2_sof(DWC2State *s) +{ + s->sof_time += s->usb_frame_time; + trace_usb_dwc2_sof(s->sof_time); + dwc2_eof_timer(s); + dwc2_raise_global_irq(s, GINTSTS_SOF); +} + +/* Do frame processing on frame boundary */ +static void dwc2_frame_boundary(void *opaque) +{ + DWC2State *s = opaque; + int64_t now; + uint16_t frcnt; + + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + /* Frame boundary, so do EOF stuff here */ + + /* Increment frame number */ + frcnt = (uint16_t)((now - s->sof_time) / s->fi); + s->frame_number = (s->frame_number + frcnt) & 0xffff; + s->hfnum = s->frame_number & HFNUM_MAX_FRNUM; + + /* Do SOF stuff here */ + dwc2_sof(s); +} + +/* Start sending SOF tokens on the USB bus */ +static void dwc2_bus_start(DWC2State *s) +{ + trace_usb_dwc2_bus_start(); + s->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + dwc2_eof_timer(s); +} + +/* Stop sending SOF tokens on the USB bus */ +static void dwc2_bus_stop(DWC2State *s) +{ + trace_usb_dwc2_bus_stop(); + timer_del(s->eof_timer); +} + +static USBDevice *dwc2_find_device(DWC2State *s, uint8_t addr) +{ + USBDevice *dev; + + trace_usb_dwc2_find_device(addr); + + if (!(s->hprt0 & HPRT0_ENA)) { + trace_usb_dwc2_port_disabled(0); + } else { + dev = usb_find_device(&s->uport, addr); + if (dev != NULL) { + trace_usb_dwc2_device_found(0); + return dev; + } + } + + trace_usb_dwc2_device_not_found(); + return NULL; +} + +static const char *pstatus[] = { + "USB_RET_SUCCESS", "USB_RET_NODEV", "USB_RET_NAK", "USB_RET_STALL", + "USB_RET_BABBLE", "USB_RET_IOERROR", "USB_RET_ASYNC", + "USB_RET_ADD_TO_QUEUE", "USB_RET_REMOVE_FROM_QUEUE" +}; + +static uint32_t pintr[] = { + HCINTMSK_XFERCOMPL, HCINTMSK_XACTERR, HCINTMSK_NAK, HCINTMSK_STALL, + HCINTMSK_BBLERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, + HCINTMSK_XACTERR +}; + +static const char *types[] = { + "Ctrl", "Isoc", "Bulk", "Intr" +}; + +static const char *dirs[] = { + "Out", "In" +}; + +static void dwc2_handle_packet(DWC2State *s, uint32_t devadr, USBDevice *dev, + USBEndpoint *ep, uint32_t index, bool send) +{ + DWC2Packet *p; + uint32_t hcchar = s->hreg1[index]; + uint32_t hctsiz = s->hreg1[index + 4]; + uint32_t hcdma = s->hreg1[index + 5]; + uint32_t chan, epnum, epdir, eptype, mps, pid, pcnt, len, tlen, intr = 0; + uint32_t tpcnt, stsidx, actual = 0; + bool do_intr = false, done = false; + + epnum = get_field(hcchar, HCCHAR_EPNUM); + epdir = get_bit(hcchar, HCCHAR_EPDIR); + eptype = get_field(hcchar, HCCHAR_EPTYPE); + mps = get_field(hcchar, HCCHAR_MPS); + pid = get_field(hctsiz, TSIZ_SC_MC_PID); + pcnt = get_field(hctsiz, TSIZ_PKTCNT); + len = get_field(hctsiz, TSIZ_XFERSIZE); + assert(len <= DWC2_MAX_XFER_SIZE); + chan = index >> 3; + p = &s->packet[chan]; + + trace_usb_dwc2_handle_packet(chan, dev, &p->packet, epnum, types[eptype], + dirs[epdir], mps, len, pcnt); + + if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { + pid = USB_TOKEN_SETUP; + } else { + pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; + } + + if (send) { + tlen = len; + if (p->small) { + if (tlen > mps) { + tlen = mps; + } + } + + if (pid != USB_TOKEN_IN) { + trace_usb_dwc2_memory_read(hcdma, tlen); + if (dma_memory_read(&s->dma_as, hcdma, + s->usb_buf[chan], tlen) != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_read failed\n", + __func__); + } + } + + usb_packet_init(&p->packet); + usb_packet_setup(&p->packet, pid, ep, 0, hcdma, + pid != USB_TOKEN_IN, true); + usb_packet_addbuf(&p->packet, s->usb_buf[chan], tlen); + p->async = DWC2_ASYNC_NONE; + usb_handle_packet(dev, &p->packet); + } else { + tlen = p->len; + } + + stsidx = -p->packet.status; + assert(stsidx < sizeof(pstatus) / sizeof(*pstatus)); + actual = p->packet.actual_length; + trace_usb_dwc2_packet_status(pstatus[stsidx], actual); + +babble: + if (p->packet.status != USB_RET_SUCCESS && + p->packet.status != USB_RET_NAK && + p->packet.status != USB_RET_STALL && + p->packet.status != USB_RET_ASYNC) { + trace_usb_dwc2_packet_error(pstatus[stsidx]); + } + + if (p->packet.status == USB_RET_ASYNC) { + trace_usb_dwc2_async_packet(&p->packet, chan, dev, epnum, + dirs[epdir], tlen); + usb_device_flush_ep_queue(dev, ep); + assert(p->async != DWC2_ASYNC_INFLIGHT); + p->devadr = devadr; + p->epnum = epnum; + p->epdir = epdir; + p->mps = mps; + p->pid = pid; + p->index = index; + p->pcnt = pcnt; + p->len = tlen; + p->async = DWC2_ASYNC_INFLIGHT; + p->needs_service = false; + return; + } + + if (p->packet.status == USB_RET_SUCCESS) { + if (actual > tlen) { + p->packet.status = USB_RET_BABBLE; + goto babble; + } + + if (pid == USB_TOKEN_IN) { + trace_usb_dwc2_memory_write(hcdma, actual); + if (dma_memory_write(&s->dma_as, hcdma, s->usb_buf[chan], + actual) != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_write failed\n", + __func__); + } + } + + tpcnt = actual / mps; + if (actual % mps) { + tpcnt++; + if (pid == USB_TOKEN_IN) { + done = true; + } + } + + pcnt -= tpcnt < pcnt ? tpcnt : pcnt; + set_field(&hctsiz, pcnt, TSIZ_PKTCNT); + len -= actual < len ? actual : len; + set_field(&hctsiz, len, TSIZ_XFERSIZE); + s->hreg1[index + 4] = hctsiz; + hcdma += actual; + s->hreg1[index + 5] = hcdma; + + if (!pcnt || len == 0 || actual == 0) { + done = true; + } + } else { + intr |= pintr[stsidx]; + if (p->packet.status == USB_RET_NAK && + (eptype == USB_ENDPOINT_XFER_CONTROL || + eptype == USB_ENDPOINT_XFER_BULK)) { + /* + * for ctrl/bulk, automatically retry on NAK, + * but send the interrupt anyway + */ + intr &= ~HCINTMSK_RESERVED14_31; + s->hreg1[index + 2] |= intr; + do_intr = true; + } else { + intr |= HCINTMSK_CHHLTD; + done = true; + } + } + + usb_packet_cleanup(&p->packet); + + if (done) { + hcchar &= ~HCCHAR_CHENA; + s->hreg1[index] = hcchar; + if (!(intr & HCINTMSK_CHHLTD)) { + intr |= HCINTMSK_CHHLTD | HCINTMSK_XFERCOMPL; + } + intr &= ~HCINTMSK_RESERVED14_31; + s->hreg1[index + 2] |= intr; + p->needs_service = false; + trace_usb_dwc2_packet_done(pstatus[stsidx], actual, len, pcnt); + dwc2_update_hc_irq(s, index); + return; + } + + p->devadr = devadr; + p->epnum = epnum; + p->epdir = epdir; + p->mps = mps; + p->pid = pid; + p->index = index; + p->pcnt = pcnt; + p->len = len; + p->needs_service = true; + trace_usb_dwc2_packet_next(pstatus[stsidx], len, pcnt); + if (do_intr) { + dwc2_update_hc_irq(s, index); + } +} + +/* Attach or detach a device on root hub */ + +static const char *speeds[] = { + "low", "full", "high" +}; + +static void dwc2_attach(USBPort *port) +{ + DWC2State *s = port->opaque; + int hispd = 0; + + trace_usb_dwc2_attach(port); + assert(port->index == 0); + + if (!port->dev || !port->dev->attached) { + return; + } + + assert(port->dev->speed <= USB_SPEED_HIGH); + trace_usb_dwc2_attach_speed(speeds[port->dev->speed]); + s->hprt0 &= ~HPRT0_SPD_MASK; + + switch (port->dev->speed) { + case USB_SPEED_LOW: + s->hprt0 |= HPRT0_SPD_LOW_SPEED << HPRT0_SPD_SHIFT; + break; + case USB_SPEED_FULL: + s->hprt0 |= HPRT0_SPD_FULL_SPEED << HPRT0_SPD_SHIFT; + break; + case USB_SPEED_HIGH: + s->hprt0 |= HPRT0_SPD_HIGH_SPEED << HPRT0_SPD_SHIFT; + hispd = 1; + break; + } + + if (hispd) { + s->usb_frame_time = NANOSECONDS_PER_SECOND / 8000; /* 125000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_HS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_HS; /* 10.4 */ + } else { + s->usb_bit_time = 1; + } + } else { + s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ + } else { + s->usb_bit_time = 1; + } + } + + s->fi = USB_FRMINTVL - 1; + s->hprt0 |= HPRT0_CONNDET | HPRT0_CONNSTS; + + dwc2_bus_start(s); + dwc2_raise_global_irq(s, GINTSTS_PRTINT); +} + +static void dwc2_detach(USBPort *port) +{ + DWC2State *s = port->opaque; + + trace_usb_dwc2_detach(port); + assert(port->index == 0); + + dwc2_bus_stop(s); + + s->hprt0 &= ~(HPRT0_SPD_MASK | HPRT0_SUSP | HPRT0_ENA | HPRT0_CONNSTS); + s->hprt0 |= HPRT0_CONNDET | HPRT0_ENACHG; + + dwc2_raise_global_irq(s, GINTSTS_PRTINT); +} + +static void dwc2_child_detach(USBPort *port, USBDevice *child) +{ + trace_usb_dwc2_child_detach(port, child); + assert(port->index == 0); +} + +static void dwc2_wakeup(USBPort *port) +{ + DWC2State *s = port->opaque; + + trace_usb_dwc2_wakeup(port); + assert(port->index == 0); + + if (s->hprt0 & HPRT0_SUSP) { + s->hprt0 |= HPRT0_RES; + dwc2_raise_global_irq(s, GINTSTS_PRTINT); + } + + qemu_bh_schedule(s->async_bh); +} + +static void dwc2_async_packet_complete(USBPort *port, USBPacket *packet) +{ + DWC2State *s = port->opaque; + DWC2Packet *p; + USBDevice *dev; + USBEndpoint *ep; + + assert(port->index == 0); + p = container_of(packet, DWC2Packet, packet); + dev = dwc2_find_device(s, p->devadr); + ep = usb_ep_get(dev, p->pid, p->epnum); + trace_usb_dwc2_async_packet_complete(port, packet, p->index >> 3, dev, + p->epnum, dirs[p->epdir], p->len); + assert(p->async == DWC2_ASYNC_INFLIGHT); + + if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { + usb_cancel_packet(packet); + usb_packet_cleanup(packet); + return; + } + + dwc2_handle_packet(s, p->devadr, dev, ep, p->index, false); + + p->async = DWC2_ASYNC_FINISHED; + qemu_bh_schedule(s->async_bh); +} + +static USBPortOps dwc2_port_ops = { + .attach = dwc2_attach, + .detach = dwc2_detach, + .child_detach = dwc2_child_detach, + .wakeup = dwc2_wakeup, + .complete = dwc2_async_packet_complete, +}; + +static uint32_t dwc2_get_frame_remaining(DWC2State *s) +{ + uint32_t fr = 0; + int64_t tks; + + tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - s->sof_time; + if (tks < 0) { + tks = 0; + } + + /* avoid muldiv if possible */ + if (tks >= s->usb_frame_time) { + goto out; + } + if (tks < s->usb_bit_time) { + fr = s->fi; + goto out; + } + + /* tks = number of ns since SOF, divided by 83 (fs) or 10 (hs) */ + tks = tks / s->usb_bit_time; + if (tks >= (int64_t)s->fi) { + goto out; + } + + /* remaining = frame interval minus tks */ + fr = (uint32_t)((int64_t)s->fi - tks); + +out: + return fr; +} + +static void dwc2_work_bh(void *opaque) +{ + DWC2State *s = opaque; + DWC2Packet *p; + USBDevice *dev; + USBEndpoint *ep; + int64_t t_now, expire_time; + int chan; + bool found = false; + + trace_usb_dwc2_work_bh(); + if (s->working) { + return; + } + s->working = true; + + t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + chan = s->next_chan; + + do { + p = &s->packet[chan]; + if (p->needs_service) { + dev = dwc2_find_device(s, p->devadr); + ep = usb_ep_get(dev, p->pid, p->epnum); + trace_usb_dwc2_work_bh_service(s->next_chan, chan, dev, p->epnum); + dwc2_handle_packet(s, p->devadr, dev, ep, p->index, true); + found = true; + } + if (++chan == DWC2_NB_CHAN) { + chan = 0; + } + if (found) { + s->next_chan = chan; + trace_usb_dwc2_work_bh_next(chan); + } + } while (chan != s->next_chan); + + if (found) { + expire_time = t_now + NANOSECONDS_PER_SECOND / 4000; + timer_mod(s->frame_timer, expire_time); + } + s->working = false; +} + +static void dwc2_enable_chan(DWC2State *s, uint32_t index) +{ + USBDevice *dev; + USBEndpoint *ep; + uint32_t hcchar; + uint32_t hctsiz; + uint32_t devadr, epnum, epdir, eptype, pid, len; + DWC2Packet *p; + + assert((index >> 3) < DWC2_NB_CHAN); + p = &s->packet[index >> 3]; + hcchar = s->hreg1[index]; + hctsiz = s->hreg1[index + 4]; + devadr = get_field(hcchar, HCCHAR_DEVADDR); + epnum = get_field(hcchar, HCCHAR_EPNUM); + epdir = get_bit(hcchar, HCCHAR_EPDIR); + eptype = get_field(hcchar, HCCHAR_EPTYPE); + pid = get_field(hctsiz, TSIZ_SC_MC_PID); + len = get_field(hctsiz, TSIZ_XFERSIZE); + + dev = dwc2_find_device(s, devadr); + + trace_usb_dwc2_enable_chan(index >> 3, dev, &p->packet, epnum); + if (dev == NULL) { + return; + } + + if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { + pid = USB_TOKEN_SETUP; + } else { + pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; + } + + ep = usb_ep_get(dev, pid, epnum); + + /* + * Hack: Networking doesn't like us delivering large transfers, it kind + * of works but the latency is horrible. So if the transfer is <= the mtu + * size, we take that as a hint that this might be a network transfer, + * and do the transfer packet-by-packet. + */ + if (len > 1536) { + p->small = false; + } else { + p->small = true; + } + + dwc2_handle_packet(s, devadr, dev, ep, index, true); + qemu_bh_schedule(s->async_bh); +} + +static const char *glbregnm[] = { + "GOTGCTL ", "GOTGINT ", "GAHBCFG ", "GUSBCFG ", "GRSTCTL ", + "GINTSTS ", "GINTMSK ", "GRXSTSR ", "GRXSTSP ", "GRXFSIZ ", + "GNPTXFSIZ", "GNPTXSTS ", "GI2CCTL ", "GPVNDCTL ", "GGPIO ", + "GUID ", "GSNPSID ", "GHWCFG1 ", "GHWCFG2 ", "GHWCFG3 ", + "GHWCFG4 ", "GLPMCFG ", "GPWRDN ", "GDFIFOCFG", "GADPCTL ", + "GREFCLK ", "GINTMSK2 ", "GINTSTS2 " +}; + +static uint64_t dwc2_glbreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr <= GINTSTS2); + val = s->glbreg[index]; + + switch (addr) { + case GRSTCTL: + /* clear any self-clearing bits that were set */ + val &= ~(GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | GRSTCTL_IN_TKNQ_FLSH | + GRSTCTL_FRMCNTRRST | GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); + s->glbreg[index] = val; + break; + default: + break; + } + + trace_usb_dwc2_glbreg_read(addr, glbregnm[index], val); + return val; +} + +static void dwc2_glbreg_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + int iflg = 0; + + assert(addr <= GINTSTS2); + mmio = &s->glbreg[index]; + old = *mmio; + + switch (addr) { + case GOTGCTL: + /* don't allow setting of read-only bits */ + val &= ~(GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | + GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | + GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); + /* don't allow clearing of read-only bits */ + val |= old & (GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | + GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | + GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); + break; + case GAHBCFG: + if ((val & GAHBCFG_GLBL_INTR_EN) && !(old & GAHBCFG_GLBL_INTR_EN)) { + iflg = 1; + } + break; + case GRSTCTL: + val |= GRSTCTL_AHBIDLE; + val &= ~GRSTCTL_DMAREQ; + if (!(old & GRSTCTL_TXFFLSH) && (val & GRSTCTL_TXFFLSH)) { + /* TODO - TX fifo flush */ + qemu_log_mask(LOG_UNIMP, "Tx FIFO flush not implemented\n"); + } + if (!(old & GRSTCTL_RXFFLSH) && (val & GRSTCTL_RXFFLSH)) { + /* TODO - RX fifo flush */ + qemu_log_mask(LOG_UNIMP, "Rx FIFO flush not implemented\n"); + } + if (!(old & GRSTCTL_IN_TKNQ_FLSH) && (val & GRSTCTL_IN_TKNQ_FLSH)) { + /* TODO - device IN token queue flush */ + qemu_log_mask(LOG_UNIMP, "Token queue flush not implemented\n"); + } + if (!(old & GRSTCTL_FRMCNTRRST) && (val & GRSTCTL_FRMCNTRRST)) { + /* TODO - host frame counter reset */ + qemu_log_mask(LOG_UNIMP, "Frame counter reset not implemented\n"); + } + if (!(old & GRSTCTL_HSFTRST) && (val & GRSTCTL_HSFTRST)) { + /* TODO - host soft reset */ + qemu_log_mask(LOG_UNIMP, "Host soft reset not implemented\n"); + } + if (!(old & GRSTCTL_CSFTRST) && (val & GRSTCTL_CSFTRST)) { + /* TODO - core soft reset */ + qemu_log_mask(LOG_UNIMP, "Core soft reset not implemented\n"); + } + /* don't allow clearing of self-clearing bits */ + val |= old & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | + GRSTCTL_IN_TKNQ_FLSH | GRSTCTL_FRMCNTRRST | + GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); + break; + case GINTSTS: + /* clear the write-1-to-clear bits */ + val |= ~old; + val = ~val; + /* don't allow clearing of read-only bits */ + val |= old & (GINTSTS_PTXFEMP | GINTSTS_HCHINT | GINTSTS_PRTINT | + GINTSTS_OEPINT | GINTSTS_IEPINT | GINTSTS_GOUTNAKEFF | + GINTSTS_GINNAKEFF | GINTSTS_NPTXFEMP | GINTSTS_RXFLVL | + GINTSTS_OTGINT | GINTSTS_CURMODE_HOST); + iflg = 1; + break; + case GINTMSK: + iflg = 1; + break; + default: + break; + } + + trace_usb_dwc2_glbreg_write(addr, glbregnm[index], orig, old, val); + *mmio = val; + + if (iflg) { + dwc2_update_irq(s); + } +} + +static uint64_t dwc2_fszreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr == HPTXFSIZ); + val = s->fszreg[index]; + + trace_usb_dwc2_fszreg_read(addr, val); + return val; +} + +static void dwc2_fszreg_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + + assert(addr == HPTXFSIZ); + mmio = &s->fszreg[index]; + old = *mmio; + + trace_usb_dwc2_fszreg_write(addr, orig, old, val); + *mmio = val; +} + +static const char *hreg0nm[] = { + "HCFG ", "HFIR ", "HFNUM ", "<rsvd> ", "HPTXSTS ", + "HAINT ", "HAINTMSK ", "HFLBADDR ", "<rsvd> ", "<rsvd> ", + "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", + "<rsvd> ", "HPRT0 " +}; + +static uint64_t dwc2_hreg0_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= HCFG && addr <= HPRT0); + val = s->hreg0[index]; + + switch (addr) { + case HFNUM: + val = (dwc2_get_frame_remaining(s) << HFNUM_FRREM_SHIFT) | + (s->hfnum << HFNUM_FRNUM_SHIFT); + break; + default: + break; + } + + trace_usb_dwc2_hreg0_read(addr, hreg0nm[index], val); + return val; +} + +static void dwc2_hreg0_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + USBDevice *dev = s->uport.dev; + uint64_t orig = val; + uint32_t *mmio; + uint32_t tval, told, old; + int prst = 0; + int iflg = 0; + + assert(addr >= HCFG && addr <= HPRT0); + mmio = &s->hreg0[index]; + old = *mmio; + + switch (addr) { + case HFIR: + break; + case HFNUM: + case HPTXSTS: + case HAINT: + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", + __func__); + return; + case HAINTMSK: + val &= 0xffff; + break; + case HPRT0: + /* don't allow clearing of read-only bits */ + val |= old & (HPRT0_SPD_MASK | HPRT0_LNSTS_MASK | HPRT0_OVRCURRACT | + HPRT0_CONNSTS); + /* don't allow clearing of self-clearing bits */ + val |= old & (HPRT0_SUSP | HPRT0_RES); + /* don't allow setting of self-setting bits */ + if (!(old & HPRT0_ENA) && (val & HPRT0_ENA)) { + val &= ~HPRT0_ENA; + } + /* clear the write-1-to-clear bits */ + tval = val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + told = old & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + tval |= ~told; + tval = ~tval; + tval &= (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + val &= ~(HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + val |= tval; + if (!(val & HPRT0_RST) && (old & HPRT0_RST)) { + if (dev && dev->attached) { + val |= HPRT0_ENA | HPRT0_ENACHG; + prst = 1; + } + } + if (val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_CONNDET)) { + iflg = 1; + } else { + iflg = -1; + } + break; + default: + break; + } + + if (prst) { + trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, + val & ~HPRT0_CONNDET); + trace_usb_dwc2_hreg0_action("call usb_port_reset"); + usb_port_reset(&s->uport); + val &= ~HPRT0_CONNDET; + } else { + trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, val); + } + + *mmio = val; + + if (iflg > 0) { + trace_usb_dwc2_hreg0_action("enable PRTINT"); + dwc2_raise_global_irq(s, GINTSTS_PRTINT); + } else if (iflg < 0) { + trace_usb_dwc2_hreg0_action("disable PRTINT"); + dwc2_lower_global_irq(s, GINTSTS_PRTINT); + } +} + +static const char *hreg1nm[] = { + "HCCHAR ", "HCSPLT ", "HCINT ", "HCINTMSK", "HCTSIZ ", "HCDMA ", + "<rsvd> ", "HCDMAB " +}; + +static uint64_t dwc2_hreg1_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); + val = s->hreg1[index]; + + trace_usb_dwc2_hreg1_read(addr, hreg1nm[index & 7], addr >> 5, val); + return val; +} + +static void dwc2_hreg1_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + int iflg = 0; + int enflg = 0; + int disflg = 0; + + assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); + mmio = &s->hreg1[index]; + old = *mmio; + + switch (HSOTG_REG(0x500) + (addr & 0x1c)) { + case HCCHAR(0): + if ((val & HCCHAR_CHDIS) && !(old & HCCHAR_CHDIS)) { + val &= ~(HCCHAR_CHENA | HCCHAR_CHDIS); + disflg = 1; + } else { + val |= old & HCCHAR_CHDIS; + if ((val & HCCHAR_CHENA) && !(old & HCCHAR_CHENA)) { + val &= ~HCCHAR_CHDIS; + enflg = 1; + } else { + val |= old & HCCHAR_CHENA; + } + } + break; + case HCINT(0): + /* clear the write-1-to-clear bits */ + val |= ~old; + val = ~val; + val &= ~HCINTMSK_RESERVED14_31; + iflg = 1; + break; + case HCINTMSK(0): + val &= ~HCINTMSK_RESERVED14_31; + iflg = 1; + break; + case HCDMAB(0): + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", + __func__); + return; + default: + break; + } + + trace_usb_dwc2_hreg1_write(addr, hreg1nm[index & 7], index >> 3, orig, + old, val); + *mmio = val; + + if (disflg) { + /* set ChHltd in HCINT */ + s->hreg1[(index & ~7) + 2] |= HCINTMSK_CHHLTD; + iflg = 1; + } + + if (enflg) { + dwc2_enable_chan(s, index & ~7); + } + + if (iflg) { + dwc2_update_hc_irq(s, index & ~7); + } +} + +static const char *pcgregnm[] = { + "PCGCTL ", "PCGCCTL1 " +}; + +static uint64_t dwc2_pcgreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= PCGCTL && addr <= PCGCCTL1); + val = s->pcgreg[index]; + + trace_usb_dwc2_pcgreg_read(addr, pcgregnm[index], val); + return val; +} + +static void dwc2_pcgreg_write(void *ptr, hwaddr addr, int index, + uint64_t val, unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + + assert(addr >= PCGCTL && addr <= PCGCCTL1); + mmio = &s->pcgreg[index]; + old = *mmio; + + trace_usb_dwc2_pcgreg_write(addr, pcgregnm[index], orig, old, val); + *mmio = val; +} + +static uint64_t dwc2_hsotg_read(void *ptr, hwaddr addr, unsigned size) +{ + uint64_t val; + + switch (addr) { + case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): + val = dwc2_glbreg_read(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, size); + break; + case HSOTG_REG(0x100): + val = dwc2_fszreg_read(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, size); + break; + case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): + /* Gadget-mode registers, just return 0 for now */ + val = 0; + break; + case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): + val = dwc2_hreg0_read(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, size); + break; + case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): + val = dwc2_hreg1_read(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, size); + break; + case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): + /* Gadget-mode registers, just return 0 for now */ + val = 0; + break; + case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): + val = dwc2_pcgreg_read(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, size); + break; + default: + g_assert_not_reached(); + } + + return val; +} + +static void dwc2_hsotg_write(void *ptr, hwaddr addr, uint64_t val, + unsigned size) +{ + switch (addr) { + case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): + dwc2_glbreg_write(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, val, size); + break; + case HSOTG_REG(0x100): + dwc2_fszreg_write(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, val, size); + break; + case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): + /* Gadget-mode registers, do nothing for now */ + break; + case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): + dwc2_hreg0_write(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, val, size); + break; + case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): + dwc2_hreg1_write(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, val, size); + break; + case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): + /* Gadget-mode registers, do nothing for now */ + break; + case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): + dwc2_pcgreg_write(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, val, size); + break; + default: + g_assert_not_reached(); + } +} + +static const MemoryRegionOps dwc2_mmio_hsotg_ops = { + .read = dwc2_hsotg_read, + .write = dwc2_hsotg_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static uint64_t dwc2_hreg2_read(void *ptr, hwaddr addr, unsigned size) +{ + /* TODO - implement FIFOs to support slave mode */ + trace_usb_dwc2_hreg2_read(addr, addr >> 12, 0); + qemu_log_mask(LOG_UNIMP, "FIFO read not implemented\n"); + return 0; +} + +static void dwc2_hreg2_write(void *ptr, hwaddr addr, uint64_t val, + unsigned size) +{ + uint64_t orig = val; + + /* TODO - implement FIFOs to support slave mode */ + trace_usb_dwc2_hreg2_write(addr, addr >> 12, orig, 0, val); + qemu_log_mask(LOG_UNIMP, "FIFO write not implemented\n"); +} + +static const MemoryRegionOps dwc2_mmio_hreg2_ops = { + .read = dwc2_hreg2_read, + .write = dwc2_hreg2_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void dwc2_wakeup_endpoint(USBBus *bus, USBEndpoint *ep, + unsigned int stream) +{ + DWC2State *s = container_of(bus, DWC2State, bus); + + trace_usb_dwc2_wakeup_endpoint(ep, stream); + + /* TODO - do something here? */ + qemu_bh_schedule(s->async_bh); +} + +static USBBusOps dwc2_bus_ops = { + .wakeup_endpoint = dwc2_wakeup_endpoint, +}; + +static void dwc2_work_timer(void *opaque) +{ + DWC2State *s = opaque; + + trace_usb_dwc2_work_timer(); + qemu_bh_schedule(s->async_bh); +} + +static void dwc2_reset_enter(Object *obj, ResetType type) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + int i; + + trace_usb_dwc2_reset_enter(); + + if (c->parent_phases.enter) { + c->parent_phases.enter(obj, type); + } + + timer_del(s->frame_timer); + qemu_bh_cancel(s->async_bh); + + if (s->uport.dev && s->uport.dev->attached) { + usb_detach(&s->uport); + } + + dwc2_bus_stop(s); + + s->gotgctl = GOTGCTL_BSESVLD | GOTGCTL_ASESVLD | GOTGCTL_CONID_B; + s->gotgint = 0; + s->gahbcfg = 0; + s->gusbcfg = 5 << GUSBCFG_USBTRDTIM_SHIFT; + s->grstctl = GRSTCTL_AHBIDLE; + s->gintsts = GINTSTS_CONIDSTSCHNG | GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | + GINTSTS_CURMODE_HOST; + s->gintmsk = 0; + s->grxstsr = 0; + s->grxstsp = 0; + s->grxfsiz = 1024; + s->gnptxfsiz = 1024 << FIFOSIZE_DEPTH_SHIFT; + s->gnptxsts = (4 << FIFOSIZE_DEPTH_SHIFT) | 1024; + s->gi2cctl = GI2CCTL_I2CDATSE0 | GI2CCTL_ACK; + s->gpvndctl = 0; + s->ggpio = 0; + s->guid = 0; + s->gsnpsid = 0x4f54294a; + s->ghwcfg1 = 0; + s->ghwcfg2 = (8 << GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT) | + (4 << GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT) | + (4 << GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT) | + GHWCFG2_DYNAMIC_FIFO | + GHWCFG2_PERIO_EP_SUPPORTED | + ((DWC2_NB_CHAN - 1) << GHWCFG2_NUM_HOST_CHAN_SHIFT) | + (GHWCFG2_INT_DMA_ARCH << GHWCFG2_ARCHITECTURE_SHIFT) | + (GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST << GHWCFG2_OP_MODE_SHIFT); + s->ghwcfg3 = (4096 << GHWCFG3_DFIFO_DEPTH_SHIFT) | + (4 << GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT) | + (4 << GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT); + s->ghwcfg4 = 0; + s->glpmcfg = 0; + s->gpwrdn = GPWRDN_PWRDNRSTN; + s->gdfifocfg = 0; + s->gadpctl = 0; + s->grefclk = 0; + s->gintmsk2 = 0; + s->gintsts2 = 0; + + s->hptxfsiz = 500 << FIFOSIZE_DEPTH_SHIFT; + + s->hcfg = 2 << HCFG_RESVALID_SHIFT; + s->hfir = 60000; + s->hfnum = 0x3fff; + s->hptxsts = (16 << TXSTS_QSPCAVAIL_SHIFT) | 32768; + s->haint = 0; + s->haintmsk = 0; + s->hprt0 = 0; + + memset(s->hreg1, 0, sizeof(s->hreg1)); + memset(s->pcgreg, 0, sizeof(s->pcgreg)); + + s->sof_time = 0; + s->frame_number = 0; + s->fi = USB_FRMINTVL - 1; + s->next_chan = 0; + s->working = false; + + for (i = 0; i < DWC2_NB_CHAN; i++) { + s->packet[i].needs_service = false; + } +} + +static void dwc2_reset_hold(Object *obj) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + + trace_usb_dwc2_reset_hold(); + + if (c->parent_phases.hold) { + c->parent_phases.hold(obj); + } + + dwc2_update_irq(s); +} + +static void dwc2_reset_exit(Object *obj) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + + trace_usb_dwc2_reset_exit(); + + if (c->parent_phases.exit) { + c->parent_phases.exit(obj); + } + + s->hprt0 = HPRT0_PWR; + if (s->uport.dev && s->uport.dev->attached) { + usb_attach(&s->uport); + usb_device_reset(s->uport.dev); + } +} + +static void dwc2_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + DWC2State *s = DWC2_USB(dev); + Object *obj; + Error *err = NULL; + + obj = object_property_get_link(OBJECT(dev), "dma-mr", &err); + if (err) { + error_setg(errp, "dwc2: required dma-mr link not found: %s", + error_get_pretty(err)); + return; + } + assert(obj != NULL); + + s->dma_mr = MEMORY_REGION(obj); + address_space_init(&s->dma_as, s->dma_mr, "dwc2"); + + usb_bus_new(&s->bus, sizeof(s->bus), &dwc2_bus_ops, dev); + usb_register_port(&s->bus, &s->uport, s, 0, &dwc2_port_ops, + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL | + (s->usb_version == 2 ? USB_SPEED_MASK_HIGH : 0)); + s->uport.dev = 0; + + s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ + } else { + s->usb_bit_time = 1; + } + + s->fi = USB_FRMINTVL - 1; + s->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_frame_boundary, s); + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_work_timer, s); + s->async_bh = qemu_bh_new(dwc2_work_bh, s); + + sysbus_init_irq(sbd, &s->irq); +} + +static void dwc2_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DWC2State *s = DWC2_USB(obj); + + memory_region_init(&s->container, obj, "dwc2", DWC2_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->container); + + memory_region_init_io(&s->hsotg, obj, &dwc2_mmio_hsotg_ops, s, + "dwc2-io", 4 * KiB); + memory_region_add_subregion(&s->container, 0x0000, &s->hsotg); + + memory_region_init_io(&s->fifos, obj, &dwc2_mmio_hreg2_ops, s, + "dwc2-fifo", 64 * KiB); + memory_region_add_subregion(&s->container, 0x1000, &s->fifos); +} + +static const VMStateDescription vmstate_dwc2_state_packet = { + .name = "dwc2/packet", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(devadr, DWC2Packet), + VMSTATE_UINT32(epnum, DWC2Packet), + VMSTATE_UINT32(epdir, DWC2Packet), + VMSTATE_UINT32(mps, DWC2Packet), + VMSTATE_UINT32(pid, DWC2Packet), + VMSTATE_UINT32(index, DWC2Packet), + VMSTATE_UINT32(pcnt, DWC2Packet), + VMSTATE_UINT32(len, DWC2Packet), + VMSTATE_INT32(async, DWC2Packet), + VMSTATE_BOOL(small, DWC2Packet), + VMSTATE_BOOL(needs_service, DWC2Packet), + VMSTATE_END_OF_LIST() + }, +}; + +const VMStateDescription vmstate_dwc2_state = { + .name = "dwc2", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(glbreg, DWC2State, + DWC2_GLBREG_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(fszreg, DWC2State, + DWC2_FSZREG_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(hreg0, DWC2State, + DWC2_HREG0_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(hreg1, DWC2State, + DWC2_HREG1_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(pcgreg, DWC2State, + DWC2_PCGREG_SIZE / sizeof(uint32_t)), + + VMSTATE_TIMER_PTR(eof_timer, DWC2State), + VMSTATE_TIMER_PTR(frame_timer, DWC2State), + VMSTATE_INT64(sof_time, DWC2State), + VMSTATE_INT64(usb_frame_time, DWC2State), + VMSTATE_INT64(usb_bit_time, DWC2State), + VMSTATE_UINT32(usb_version, DWC2State), + VMSTATE_UINT16(frame_number, DWC2State), + VMSTATE_UINT16(fi, DWC2State), + VMSTATE_UINT16(next_chan, DWC2State), + VMSTATE_BOOL(working, DWC2State), + + VMSTATE_STRUCT_ARRAY(packet, DWC2State, DWC2_NB_CHAN, 1, + vmstate_dwc2_state_packet, DWC2Packet), + VMSTATE_UINT8_2DARRAY(usb_buf, DWC2State, DWC2_NB_CHAN, + DWC2_MAX_XFER_SIZE), + + VMSTATE_END_OF_LIST() + } +}; + +static Property dwc2_usb_properties[] = { + DEFINE_PROP_UINT32("usb_version", DWC2State, usb_version, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void dwc2_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + DWC2Class *c = DWC2_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->realize = dwc2_realize; + dc->vmsd = &vmstate_dwc2_state; + set_bit(DEVICE_CATEGORY_USB, dc->categories); + device_class_set_props(dc, dwc2_usb_properties); + resettable_class_set_parent_phases(rc, dwc2_reset_enter, dwc2_reset_hold, + dwc2_reset_exit, &c->parent_phases); +} + +static const TypeInfo dwc2_usb_type_info = { + .name = TYPE_DWC2_USB, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(DWC2State), + .instance_init = dwc2_init, + .class_size = sizeof(DWC2Class), + .class_init = dwc2_class_init, +}; + +static void dwc2_usb_register_types(void) +{ + type_register_static(&dwc2_usb_type_info); +} + +type_init(dwc2_usb_register_types) diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Kconfig +++ b/hw/usb/Kconfig @@ -XXX,XX +XXX,XX @@ config USB_MUSB bool select USB +config USB_DWC2 + bool + default y + select USB + config TUSB6010 bool select USB_MUSB diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Makefile.objs +++ b/hw/usb/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_USB_EHCI_SYSBUS) += hcd-ehci-sysbus.o common-obj-$(CONFIG_USB_XHCI) += hcd-xhci.o common-obj-$(CONFIG_USB_XHCI_NEC) += hcd-xhci-nec.o common-obj-$(CONFIG_USB_MUSB) += hcd-musb.o +common-obj-$(CONFIG_USB_DWC2) += hcd-dwc2.o common-obj-$(CONFIG_TUSB6010) += tusb6010.o common-obj-$(CONFIG_IMX) += chipidea.o diff --git a/hw/usb/trace-events b/hw/usb/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/trace-events +++ b/hw/usb/trace-events @@ -XXX,XX +XXX,XX @@ usb_xhci_xfer_error(void *xfer, uint32_t ret) "%p: ret %d" usb_xhci_unimplemented(const char *item, int nr) "%s (0x%x)" usb_xhci_enforced_limit(const char *item) "%s" +# hcd-dwc2.c +usb_dwc2_update_irq(uint32_t level) "level=%d" +usb_dwc2_raise_global_irq(uint32_t intr) "0x%08x" +usb_dwc2_lower_global_irq(uint32_t intr) "0x%08x" +usb_dwc2_raise_host_irq(uint32_t intr) "0x%04x" +usb_dwc2_lower_host_irq(uint32_t intr) "0x%04x" +usb_dwc2_sof(int64_t next) "next SOF %" PRId64 +usb_dwc2_bus_start(void) "start SOFs" +usb_dwc2_bus_stop(void) "stop SOFs" +usb_dwc2_find_device(uint8_t addr) "%d" +usb_dwc2_port_disabled(uint32_t pnum) "port %d disabled" +usb_dwc2_device_found(uint32_t pnum) "device found on port %d" +usb_dwc2_device_not_found(void) "device not found" +usb_dwc2_handle_packet(uint32_t chan, void *dev, void *pkt, uint32_t ep, const char *type, const char *dir, uint32_t mps, uint32_t len, uint32_t pcnt) "ch %d dev %p pkt %p ep %d type %s dir %s mps %d len %d pcnt %d" +usb_dwc2_memory_read(uint32_t addr, uint32_t len) "addr %d len %d" +usb_dwc2_packet_status(const char *status, uint32_t len) "status %s len %d" +usb_dwc2_packet_error(const char *status) "ERROR %s" +usb_dwc2_async_packet(void *pkt, uint32_t chan, void *dev, uint32_t ep, const char *dir, uint32_t len) "pkt %p ch %d dev %p ep %d %s len %d" +usb_dwc2_memory_write(uint32_t addr, uint32_t len) "addr %d len %d" +usb_dwc2_packet_done(const char *status, uint32_t actual, uint32_t len, uint32_t pcnt) "status %s actual %d len %d pcnt %d" +usb_dwc2_packet_next(const char *status, uint32_t len, uint32_t pcnt) "status %s len %d pcnt %d" +usb_dwc2_attach(void *port) "port %p" +usb_dwc2_attach_speed(const char *speed) "%s-speed device attached" +usb_dwc2_detach(void *port) "port %p" +usb_dwc2_child_detach(void *port, void *child) "port %p child %p" +usb_dwc2_wakeup(void *port) "port %p" +usb_dwc2_async_packet_complete(void *port, void *pkt, uint32_t chan, void *dev, uint32_t ep, const char *dir, uint32_t len) "port %p packet %p ch %d dev %p ep %d %s len %d" +usb_dwc2_work_bh(void) "" +usb_dwc2_work_bh_service(uint32_t first, uint32_t current, void *dev, uint32_t ep) "first %d servicing %d dev %p ep %d" +usb_dwc2_work_bh_next(uint32_t chan) "next %d" +usb_dwc2_enable_chan(uint32_t chan, void *dev, void *pkt, uint32_t ep) "ch %d dev %p pkt %p ep %d" +usb_dwc2_glbreg_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_glbreg_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_fszreg_read(uint64_t addr, uint32_t val) " 0x%04" PRIx64 " HPTXFSIZ val 0x%08x" +usb_dwc2_fszreg_write(uint64_t addr, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " HPTXFSIZ val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg0_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_hreg0_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg1_read(uint64_t addr, const char *reg, uint64_t chan, uint32_t val) " 0x%04" PRIx64 " %s%" PRId64 " val 0x%08x" +usb_dwc2_hreg1_write(uint64_t addr, const char *reg, uint64_t chan, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " %s%" PRId64 " val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_pcgreg_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_pcgreg_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg2_read(uint64_t addr, uint64_t fifo, uint32_t val) " 0x%04" PRIx64 " FIFO%" PRId64 " val 0x%08x" +usb_dwc2_hreg2_write(uint64_t addr, uint64_t fifo, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " FIFO%" PRId64 " val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg0_action(const char *s) "%s" +usb_dwc2_wakeup_endpoint(void *ep, uint32_t stream) "endp %p stream %d" +usb_dwc2_work_timer(void) "" +usb_dwc2_reset_enter(void) "=== RESET enter ===" +usb_dwc2_reset_hold(void) "=== RESET hold ===" +usb_dwc2_reset_exit(void) "=== RESET exit ===" + # desc.c usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d" usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d" -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> The dwc-hsotg (dwc2) USB host depends on a short packet to indicate the end of an IN transfer. The usb-storage driver currently doesn't provide this, so fix it. I have tested this change rather extensively using a PC emulation with xhci, ehci, and uhci controllers, and have not observed any regressions. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-6-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/dev-storage.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/usb/dev-storage.c b/hw/usb/dev-storage.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-storage.c +++ b/hw/usb/dev-storage.c @@ -XXX,XX +XXX,XX @@ static void usb_msd_copy_data(MSDState *s, USBPacket *p) usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len); s->scsi_len -= len; s->scsi_off += len; + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->scsi_len == 0 || s->data_len == 0) { scsi_req_continue(s->req); @@ -XXX,XX +XXX,XX @@ static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t r if (s->data_len) { int len = (p->iov.size - p->actual_length); usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; } if (s->data_len == 0) { @@ -XXX,XX +XXX,XX @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) int len = p->iov.size - p->actual_length; if (len) { usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->data_len == 0) { s->mode = USB_MSDM_CSW; @@ -XXX,XX +XXX,XX @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) int len = p->iov.size - p->actual_length; if (len) { usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->data_len == 0) { s->mode = USB_MSDM_CSW; } } } - if (p->actual_length < p->iov.size) { + if (p->actual_length < p->iov.size && (p->short_not_ok || + s->scsi_len >= p->ep->max_packet_size)) { DPRINTF("Deferring packet %p [wait data-in]\n", p); s->packet = p; p->status = USB_RET_ASYNC; -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Wire the dwc-hsotg (dwc2) emulation into Qemu Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-7-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 3 ++- hw/arm/bcm2835_peripherals.c | 21 ++++++++++++++++++++- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/bcm2835_sdhost.h" #include "hw/gpio/bcm2835_gpio.h" #include "hw/timer/bcm2835_systmr.h" +#include "hw/usb/hcd-dwc2.h" #include "hw/misc/unimp.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { UnimplementedDeviceState ave0; UnimplementedDeviceState bscsl; UnimplementedDeviceState smi; - UnimplementedDeviceState dwc2; + DWC2State dwc2; UnimplementedDeviceState sdramc; } BCM2835PeripheralState; diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) /* Mphi */ sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi), TYPE_BCM2835_MPHI); + + /* DWC2 */ + sysbus_init_child_obj(obj, "dwc2", &s->dwc2, sizeof(s->dwc2), + TYPE_DWC2_USB); + + object_property_add_const_link(OBJECT(&s->dwc2), "dma-mr", + OBJECT(&s->gpu_bus_mr)); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, INTERRUPT_HOSTPORT)); + /* DWC2 */ + object_property_set_bool(OBJECT(&s->dwc2), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, USB_OTG_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dwc2), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->dwc2), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_USB)); + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->otp, "bcm2835-otp", OTP_OFFSET, 0x80); create_unimp(s, &s->dbus, "bcm2835-dbus", DBUS_OFFSET, 0x8000); create_unimp(s, &s->ave0, "bcm2835-ave0", AVE0_OFFSET, 0x8000); - create_unimp(s, &s->dwc2, "dwc-usb2", USB_OTG_OFFSET, 0x1000); create_unimp(s, &s->sdramc, "bcm2835-sdramc", SDRAMC_OFFSET, 0x100); } -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add a check for functional dwc-hsotg (dwc2) USB host emulation to the Raspi 2 acceptance test Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-8-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(LinuxKernelTest): self.vm.set_console() kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + - serial_kernel_cmdline[uart_id]) + serial_kernel_cmdline[uart_id] + + ' root=/dev/mmcblk0p2 rootwait ' + + 'dwc_otg.fiq_fsm_enable=0') self.vm.add_args('-kernel', kernel_path, '-dtb', dtb_path, - '-append', kernel_command_line) + '-append', kernel_command_line, + '-device', 'usb-kbd') self.vm.launch() console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + console_pattern = 'Product: QEMU USB Keyboard' + self.wait_for_console_pattern(console_pattern) def test_arm_raspi2_uart0(self): """ -- 2.20.1 Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-2-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 25 ++++++++++++++++++++++ target/arm/translate-neon.inc.c | 38 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 18 +++++++--------- 3 files changed, 71 insertions(+), 10 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VRECPS_fp_3s 1111 001 0 0 . 0 . .... .... 1111 ... 1 .... @3same_fp VRSQRTS_fp_3s 1111 001 0 0 . 1 . .... .... 1111 ... 1 .... @3same_fp VMAXNM_fp_3s 1111 001 1 0 . 0 . .... .... 1111 ... 1 .... @3same_fp VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp + +###################################################################### +# 2-reg-and-shift grouping: +# 1111 001 U 1 D immH:3 immL:3 Vd:4 opc:4 L Q M 1 Vm:4 +###################################################################### +&2reg_shift vm vd q shift size + +@2reg_shl_d .... ... . . . shift:6 .... .... 1 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 +@2reg_shl_s .... ... . . . 1 shift:5 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 +@2reg_shl_h .... ... . . . 01 shift:4 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 +@2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 + +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b + +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_3same_fp_pair(DisasContext *s, arg_3same *a, VFPGen3OpSPFn *fn) DO_3S_FP_PAIR(VPADD, gen_helper_vfp_adds) DO_3S_FP_PAIR(VPMAX, gen_helper_vfp_maxs) DO_3S_FP_PAIR(VPMIN, gen_helper_vfp_mins) + +static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) +{ + /* Handle a 2-reg-shift insn which can be vectorized. */ + int vec_size = a->q ? 16 : 8; + int rd_ofs = neon_reg_offset(a->vd, 0); + int rm_ofs = neon_reg_offset(a->vm, 0); + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fn(a->size, rd_ofs, rm_ofs, a->shift, vec_size, vec_size); + return true; +} + +#define DO_2SH(INSN, FUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_vector_2sh(s, a, FUNC); \ + } \ + +DO_2SH(VSHL, tcg_gen_gvec_shli) +DO_2SH(VSLI, gen_gvec_sli) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if ((insn & 0x00380080) != 0) { /* Two registers and shift. */ op = (insn >> 8) & 0xf; + + switch (op) { + case 5: /* VSHL, VSLI */ + return 1; /* handled by decodetree */ + default: + break; + } + if (insn & (1 << 7)) { /* 64-bit shift. */ if (op > 7) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) gen_gvec_sri(size, rd_ofs, rm_ofs, shift, vec_size, vec_size); return 0; - - case 5: /* VSHL, VSLI */ - if (u) { /* VSLI */ - gen_gvec_sli(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { /* VSHL */ - tcg_gen_gvec_shli(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; } if (size == 3) { -- 2.20.1 Convert the VSHR 2-reg-shift insns to decodetree. Note that unlike the legacy decoder, we present the right shift amount to the trans_ function as a positive integer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-3-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 25 ++++++++++++++++++++ target/arm/translate-neon.inc.c | 41 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 21 +---------------- 3 files changed, 67 insertions(+), 20 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp ###################################################################### &2reg_shift vm vd q shift size +# Right shifts are encoded as N - shift, where N is the element size in bits. +%neon_rshift_i6 16:6 !function=rsub_64 +%neon_rshift_i5 16:5 !function=rsub_32 +%neon_rshift_i4 16:4 !function=rsub_16 +%neon_rshift_i3 16:3 !function=rsub_8 + +@2reg_shr_d .... ... . . . ...... .... .... 1 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 shift=%neon_rshift_i6 +@2reg_shr_s .... ... . . . 1 ..... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 shift=%neon_rshift_i5 +@2reg_shr_h .... ... . . . 01 .... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 shift=%neon_rshift_i4 +@2reg_shr_b .... ... . . . 001 ... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i3 + @2reg_shl_d .... ... . . . shift:6 .... .... 1 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=3 @2reg_shl_s .... ... . . . 1 shift:5 .... .... 0 q:1 . . .... \ @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b + +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b + VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static inline int plus1(DisasContext *s, int x) return x + 1; } +static inline int rsub_64(DisasContext *s, int x) +{ + return 64 - x; +} + +static inline int rsub_32(DisasContext *s, int x) +{ + return 32 - x; +} +static inline int rsub_16(DisasContext *s, int x) +{ + return 16 - x; +} +static inline int rsub_8(DisasContext *s, int x) +{ + return 8 - x; +} + /* Include the generated Neon decoder */ #include "decode-neon-dp.inc.c" #include "decode-neon-ls.inc.c" @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) DO_2SH(VSHL, tcg_gen_gvec_shli) DO_2SH(VSLI, gen_gvec_sli) + +static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a) +{ + /* Signed shift out of range results in all-sign-bits */ + a->shift = MIN(a->shift, (8 << a->size) - 1); + return do_vector_2sh(s, a, tcg_gen_gvec_sari); +} + +static void gen_zero_rd_2sh(unsigned vece, uint32_t rd_ofs, uint32_t rm_ofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(vece, rd_ofs, oprsz, maxsz, 0); +} + +static bool trans_VSHR_U_2sh(DisasContext *s, arg_2reg_shift *a) +{ + /* Shift out of range is architecturally valid and results in zero. */ + if (a->shift >= (8 << a->size)) { + return do_vector_2sh(s, a, gen_zero_rd_2sh); + } else { + return do_vector_2sh(s, a, tcg_gen_gvec_shri); + } +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) op = (insn >> 8) & 0xf; switch (op) { + case 0: /* VSHR */ case 5: /* VSHL, VSLI */ return 1; /* handled by decodetree */ default: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } switch (op) { - case 0: /* VSHR */ - /* Right shift comes here negative. */ - shift = -shift; - /* Shifts larger than the element size are architecturally - * valid. Unsigned results in all zeros; signed results - * in all sign bits. - */ - if (!u) { - tcg_gen_gvec_sari(size, rd_ofs, rm_ofs, - MIN(shift, (8 << size) - 1), - vec_size, vec_size); - } else if (shift >= 8 << size) { - tcg_gen_gvec_dup_imm(MO_8, rd_ofs, vec_size, - vec_size, 0); - } else { - tcg_gen_gvec_shri(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - case 1: /* VSRA */ /* Right shift comes here negative. */ shift = -shift; -- 2.20.1 Convert the VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree. (These are the last instructions in the group that are vectorized; the rest all require looping over each element.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-4-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 35 ++++++++++++++++++++++ target/arm/translate-neon.inc.c | 7 +++++ target/arm/translate.c | 52 +++------------------------------ 3 files changed, 46 insertions(+), 48 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_d +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_s +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_h +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_b + +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_d +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_s +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_h +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_b + +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_d +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_s +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_h +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_b + +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_d +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_s +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_h +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_b + +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_d +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_s +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_h +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_b + +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_d +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_s +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_h +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_b + +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_d +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_s +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_h +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_b + VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) DO_2SH(VSHL, tcg_gen_gvec_shli) DO_2SH(VSLI, gen_gvec_sli) +DO_2SH(VSRI, gen_gvec_sri) +DO_2SH(VSRA_S, gen_gvec_ssra) +DO_2SH(VSRA_U, gen_gvec_usra) +DO_2SH(VRSHR_S, gen_gvec_srshr) +DO_2SH(VRSHR_U, gen_gvec_urshr) +DO_2SH(VRSRA_S, gen_gvec_srsra) +DO_2SH(VRSRA_U, gen_gvec_ursra) static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) switch (op) { case 0: /* VSHR */ + case 1: /* VSRA */ + case 2: /* VRSHR */ + case 3: /* VRSRA */ + case 4: /* VSRI */ case 5: /* VSHL, VSLI */ return 1; /* handled by decodetree */ default: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) shift = shift - (1 << (size + 3)); } - switch (op) { - case 1: /* VSRA */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_usra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_ssra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 2: /* VRSHR */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_urshr(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_srshr(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 3: /* VRSRA */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_ursra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_srsra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 4: /* VSRI */ - if (!u) { - return 1; - } - /* Right shift comes here negative. */ - shift = -shift; - gen_gvec_sri(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - return 0; - } - if (size == 3) { count = q + 1; } else { -- 2.20.1 Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree. These are the last of the simple shift-by-immediate insns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-5-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 15 +++++ target/arm/translate-neon.inc.c | 108 +++++++++++++++++++++++++++++++ target/arm/translate.c | 110 +------------------------------- 3 files changed, 126 insertions(+), 107 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b + +VQSHLU_64_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_d +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_s +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_h +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_b + +VQSHL_S_64_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b + +VQSHL_U_64_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHR_U_2sh(DisasContext *s, arg_2reg_shift *a) return do_vector_2sh(s, a, tcg_gen_gvec_shri); } } + +static bool do_2shift_env_64(DisasContext *s, arg_2reg_shift *a, + NeonGenTwo64OpEnvFn *fn) +{ + /* + * 2-reg-and-shift operations, size == 3 case, where the + * function needs to be passed cpu_env. + */ + TCGv_i64 constimm; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * To avoid excessive duplication of ops we implement shift + * by immediate using the variable shift operations. + */ + constimm = tcg_const_i64(dup_const(a->size, a->shift)); + + for (pass = 0; pass < a->q + 1; pass++) { + TCGv_i64 tmp = tcg_temp_new_i64(); + + neon_load_reg64(tmp, a->vm + pass); + fn(tmp, cpu_env, tmp, constimm); + neon_store_reg64(tmp, a->vd + pass); + } + tcg_temp_free_i64(constimm); + return true; +} + +static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoOpEnvFn *fn) +{ + /* + * 2-reg-and-shift operations, size < 3 case, where the + * helper needs to be passed cpu_env. + */ + TCGv_i32 constimm; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * To avoid excessive duplication of ops we implement shift + * by immediate using the variable shift operations. + */ + constimm = tcg_const_i32(dup_const(a->size, a->shift)); + + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + fn(tmp, cpu_env, tmp, constimm); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_i32(constimm); + return true; +} + +#define DO_2SHIFT_ENV(INSN, FUNC) \ + static bool trans_##INSN##_64_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_env_64(s, a, gen_helper_neon_##FUNC##64); \ + } \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + static NeonGenTwoOpEnvFn * const fns[] = { \ + gen_helper_neon_##FUNC##8, \ + gen_helper_neon_##FUNC##16, \ + gen_helper_neon_##FUNC##32, \ + }; \ + assert(a->size < ARRAY_SIZE(fns)); \ + return do_2shift_env_32(s, a, fns[a->size]); \ + } + +DO_2SHIFT_ENV(VQSHLU, qshlu_s) +DO_2SHIFT_ENV(VQSHL_U, qshl_u) +DO_2SHIFT_ENV(VQSHL_S, qshl_s) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_rsb(int size, TCGv_i32 t0, TCGv_i32 t1) } } -#define GEN_NEON_INTEGER_OP_ENV(name) do { \ - switch ((size << 1) | u) { \ - case 0: \ - gen_helper_neon_##name##_s8(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 1: \ - gen_helper_neon_##name##_u8(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 2: \ - gen_helper_neon_##name##_s16(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 3: \ - gen_helper_neon_##name##_u16(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 4: \ - gen_helper_neon_##name##_s32(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 5: \ - gen_helper_neon_##name##_u32(tmp, cpu_env, tmp, tmp2); \ - break; \ - default: return 1; \ - }} while (0) - static TCGv_i32 neon_load_scratch(int scratch) { TCGv_i32 tmp = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int size; int shift; int pass; - int count; int u; int vec_size; uint32_t imm; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 3: /* VRSRA */ case 4: /* VSRI */ case 5: /* VSHL, VSLI */ + case 6: /* VQSHLU */ + case 7: /* VQSHL */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op < 8) { - /* Shift by immediate: - VSHR, VSRA, VRSHR, VRSRA, VSRI, VSHL, VQSHL, VQSHLU. */ - if (q && ((rd | rm) & 1)) { - return 1; - } - if (!u && (op == 4 || op == 6)) { - return 1; - } - /* Right shifts are encoded as N - shift, where N is the - element size in bits. */ - if (op <= 4) { - shift = shift - (1 << (size + 3)); - } - - if (size == 3) { - count = q + 1; - } else { - count = q ? 4: 2; - } - - /* To avoid excessive duplication of ops we implement shift - * by immediate using the variable shift operations. - */ - imm = dup_const(size, shift); - - for (pass = 0; pass < count; pass++) { - if (size == 3) { - neon_load_reg64(cpu_V0, rm + pass); - tcg_gen_movi_i64(cpu_V1, imm); - switch (op) { - case 6: /* VQSHLU */ - gen_helper_neon_qshlu_s64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - break; - case 7: /* VQSHL */ - if (u) { - gen_helper_neon_qshl_u64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - } else { - gen_helper_neon_qshl_s64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - } - break; - default: - g_assert_not_reached(); - } - neon_store_reg64(cpu_V0, rd + pass); - } else { /* size < 3 */ - /* Operands in T0 and T1. */ - tmp = neon_load_reg(rm, pass); - tmp2 = tcg_temp_new_i32(); - tcg_gen_movi_i32(tmp2, imm); - switch (op) { - case 6: /* VQSHLU */ - switch (size) { - case 0: - gen_helper_neon_qshlu_s8(tmp, cpu_env, - tmp, tmp2); - break; - case 1: - gen_helper_neon_qshlu_s16(tmp, cpu_env, - tmp, tmp2); - break; - case 2: - gen_helper_neon_qshlu_s32(tmp, cpu_env, - tmp, tmp2); - break; - default: - abort(); - } - break; - case 7: /* VQSHL */ - GEN_NEON_INTEGER_OP_ENV(qshl); - break; - default: - g_assert_not_reached(); - } - tcg_temp_free_i32(tmp2); - neon_store_reg(rd, pass, tmp); - } - } /* for pass */ - } else if (op < 10) { + if (op < 10) { /* Shift by immediate and narrow: VSHRN, VRSHRN, VQSHRN, VQRSHRN. */ int input_unsigned = (op == 8) ? !u : u; -- 2.20.1 Convert the Neon narrowing shifts where op==8 to decodetree: * VSHRN * VRSHRN * VQSHRUN * VQRSHRUN Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-6-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 27 ++++++ target/arm/translate-neon.inc.c | 167 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 1 + 3 files changed, 195 insertions(+) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 +# Narrowing right shifts: here the Q bit is part of the opcode decode +@2reg_shrn_d .... ... . . . 1 ..... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 q=0 \ + shift=%neon_rshift_i5 +@2reg_shrn_s .... ... . . . 01 .... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 q=0 \ + shift=%neon_rshift_i4 +@2reg_shrn_h .... ... . . . 001 ... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 \ + shift=%neon_rshift_i3 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VQSHL_U_64_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b + +VSHRN_64_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_d +VSHRN_32_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_s +VSHRN_16_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h + +VRSHRN_64_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d +VRSHRN_32_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s +VRSHRN_16_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h + +VQSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_d +VQSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_s +VQSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h + +VQRSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d +VQRSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s +VQRSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, DO_2SHIFT_ENV(VQSHLU, qshlu_s) DO_2SHIFT_ENV(VQSHL_U, qshl_u) DO_2SHIFT_ENV(VQSHL_S, qshl_s) + +static bool do_2shift_narrow_64(DisasContext *s, arg_2reg_shift *a, + NeonGenTwo64OpFn *shiftfn, + NeonGenNarrowEnvFn *narrowfn) +{ + /* 2-reg-and-shift narrowing-shift operations, size == 3 case */ + TCGv_i64 constimm, rm1, rm2; + TCGv_i32 rd; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is always a right shift, and the shiftfn is always a + * left-shift helper, which thus needs the negated shift count. + */ + constimm = tcg_const_i64(-a->shift); + rm1 = tcg_temp_new_i64(); + rm2 = tcg_temp_new_i64(); + + /* Load both inputs first to avoid potential overwrite if rm == rd */ + neon_load_reg64(rm1, a->vm); + neon_load_reg64(rm2, a->vm + 1); + + shiftfn(rm1, rm1, constimm); + rd = tcg_temp_new_i32(); + narrowfn(rd, cpu_env, rm1); + neon_store_reg(a->vd, 0, rd); + + shiftfn(rm2, rm2, constimm); + rd = tcg_temp_new_i32(); + narrowfn(rd, cpu_env, rm2); + neon_store_reg(a->vd, 1, rd); + + tcg_temp_free_i64(rm1); + tcg_temp_free_i64(rm2); + tcg_temp_free_i64(constimm); + + return true; +} + +static bool do_2shift_narrow_32(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoOpFn *shiftfn, + NeonGenNarrowEnvFn *narrowfn) +{ + /* 2-reg-and-shift narrowing-shift operations, size < 3 case */ + TCGv_i32 constimm, rm1, rm2, rm3, rm4; + TCGv_i64 rtmp; + uint32_t imm; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is always a right shift, and the shiftfn is always a + * left-shift helper, which thus needs the negated shift count + * duplicated into each lane of the immediate value. + */ + if (a->size == 1) { + imm = (uint16_t)(-a->shift); + imm |= imm << 16; + } else { + /* size == 2 */ + imm = -a->shift; + } + constimm = tcg_const_i32(imm); + + /* Load all inputs first to avoid potential overwrite */ + rm1 = neon_load_reg(a->vm, 0); + rm2 = neon_load_reg(a->vm, 1); + rm3 = neon_load_reg(a->vm + 1, 0); + rm4 = neon_load_reg(a->vm + 1, 1); + rtmp = tcg_temp_new_i64(); + + shiftfn(rm1, rm1, constimm); + shiftfn(rm2, rm2, constimm); + + tcg_gen_concat_i32_i64(rtmp, rm1, rm2); + tcg_temp_free_i32(rm2); + + narrowfn(rm1, cpu_env, rtmp); + neon_store_reg(a->vd, 0, rm1); + + shiftfn(rm3, rm3, constimm); + shiftfn(rm4, rm4, constimm); + tcg_temp_free_i32(constimm); + + tcg_gen_concat_i32_i64(rtmp, rm3, rm4); + tcg_temp_free_i32(rm4); + + narrowfn(rm3, cpu_env, rtmp); + tcg_temp_free_i64(rtmp); + neon_store_reg(a->vd, 1, rm3); + return true; +} + +#define DO_2SN_64(INSN, FUNC, NARROWFUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_narrow_64(s, a, FUNC, NARROWFUNC); \ + } +#define DO_2SN_32(INSN, FUNC, NARROWFUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_narrow_32(s, a, FUNC, NARROWFUNC); \ + } + +static void gen_neon_narrow_u32(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + tcg_gen_extrl_i64_i32(dest, src); +} + +static void gen_neon_narrow_u16(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + gen_helper_neon_narrow_u16(dest, src); +} + +static void gen_neon_narrow_u8(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + gen_helper_neon_narrow_u8(dest, src); +} + +DO_2SN_64(VSHRN_64, gen_ushl_i64, gen_neon_narrow_u32) +DO_2SN_32(VSHRN_32, gen_ushl_i32, gen_neon_narrow_u16) +DO_2SN_32(VSHRN_16, gen_helper_neon_shl_u16, gen_neon_narrow_u8) + +DO_2SN_64(VRSHRN_64, gen_helper_neon_rshl_u64, gen_neon_narrow_u32) +DO_2SN_32(VRSHRN_32, gen_helper_neon_rshl_u32, gen_neon_narrow_u16) +DO_2SN_32(VRSHRN_16, gen_helper_neon_rshl_u16, gen_neon_narrow_u8) + +DO_2SN_64(VQSHRUN_64, gen_sshl_i64, gen_helper_neon_unarrow_sat32) +DO_2SN_32(VQSHRUN_32, gen_sshl_i32, gen_helper_neon_unarrow_sat16) +DO_2SN_32(VQSHRUN_16, gen_helper_neon_shl_s16, gen_helper_neon_unarrow_sat8) + +DO_2SN_64(VQRSHRUN_64, gen_helper_neon_rshl_s64, gen_helper_neon_unarrow_sat32) +DO_2SN_32(VQRSHRUN_32, gen_helper_neon_rshl_s32, gen_helper_neon_unarrow_sat16) +DO_2SN_32(VQRSHRUN_16, gen_helper_neon_rshl_s16, gen_helper_neon_unarrow_sat8) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 5: /* VSHL, VSLI */ case 6: /* VQSHLU */ case 7: /* VQSHL */ + case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ return 1; /* handled by decodetree */ default: break; -- 2.20.1 Convert the remaining Neon narrowing shifts to decodetree: * VQSHRN * VQRSHRN Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-7-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 20 ++++++ target/arm/translate-neon.inc.c | 15 +++++ target/arm/translate.c | 110 +------------------------------- 3 files changed, 37 insertions(+), 108 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VQSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h VQRSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d VQRSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s VQRSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h + +# VQSHRN with signed input +VQSHRN_S64_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_d +VQSHRN_S32_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_s +VQSHRN_S16_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h + +# VQRSHRN with signed input +VQRSHRN_S64_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d +VQRSHRN_S32_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s +VQRSHRN_S16_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h + +# VQSHRN with unsigned input +VQSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_d +VQSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_s +VQSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h + +# VQRSHRN with unsigned input +VQRSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d +VQRSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s +VQRSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2SN_32(VQSHRUN_16, gen_helper_neon_shl_s16, gen_helper_neon_unarrow_sat8) DO_2SN_64(VQRSHRUN_64, gen_helper_neon_rshl_s64, gen_helper_neon_unarrow_sat32) DO_2SN_32(VQRSHRUN_32, gen_helper_neon_rshl_s32, gen_helper_neon_unarrow_sat16) DO_2SN_32(VQRSHRUN_16, gen_helper_neon_rshl_s16, gen_helper_neon_unarrow_sat8) +DO_2SN_64(VQSHRN_S64, gen_sshl_i64, gen_helper_neon_narrow_sat_s32) +DO_2SN_32(VQSHRN_S32, gen_sshl_i32, gen_helper_neon_narrow_sat_s16) +DO_2SN_32(VQSHRN_S16, gen_helper_neon_shl_s16, gen_helper_neon_narrow_sat_s8) + +DO_2SN_64(VQRSHRN_S64, gen_helper_neon_rshl_s64, gen_helper_neon_narrow_sat_s32) +DO_2SN_32(VQRSHRN_S32, gen_helper_neon_rshl_s32, gen_helper_neon_narrow_sat_s16) +DO_2SN_32(VQRSHRN_S16, gen_helper_neon_rshl_s16, gen_helper_neon_narrow_sat_s8) + +DO_2SN_64(VQSHRN_U64, gen_ushl_i64, gen_helper_neon_narrow_sat_u32) +DO_2SN_32(VQSHRN_U32, gen_ushl_i32, gen_helper_neon_narrow_sat_u16) +DO_2SN_32(VQSHRN_U16, gen_helper_neon_shl_u16, gen_helper_neon_narrow_sat_u8) + +DO_2SN_64(VQRSHRN_U64, gen_helper_neon_rshl_u64, gen_helper_neon_narrow_sat_u32) +DO_2SN_32(VQRSHRN_U32, gen_helper_neon_rshl_u32, gen_helper_neon_narrow_sat_u16) +DO_2SN_32(VQRSHRN_U16, gen_helper_neon_rshl_u16, gen_helper_neon_narrow_sat_u8) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_unarrow_sats(int size, TCGv_i32 dest, TCGv_i64 src) } } -static inline void gen_neon_shift_narrow(int size, TCGv_i32 var, TCGv_i32 shift, - int q, int u) -{ - if (q) { - if (u) { - switch (size) { - case 1: gen_helper_neon_rshl_u16(var, var, shift); break; - case 2: gen_helper_neon_rshl_u32(var, var, shift); break; - default: abort(); - } - } else { - switch (size) { - case 1: gen_helper_neon_rshl_s16(var, var, shift); break; - case 2: gen_helper_neon_rshl_s32(var, var, shift); break; - default: abort(); - } - } - } else { - if (u) { - switch (size) { - case 1: gen_helper_neon_shl_u16(var, var, shift); break; - case 2: gen_ushl_i32(var, var, shift); break; - default: abort(); - } - } else { - switch (size) { - case 1: gen_helper_neon_shl_s16(var, var, shift); break; - case 2: gen_sshl_i32(var, var, shift); break; - default: abort(); - } - } - } -} - static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) { if (u) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 6: /* VQSHLU */ case 7: /* VQSHL */ case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ + case 9: /* VQSHRN, VQRSHRN */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op < 10) { - /* Shift by immediate and narrow: - VSHRN, VRSHRN, VQSHRN, VQRSHRN. */ - int input_unsigned = (op == 8) ? !u : u; - if (rm & 1) { - return 1; - } - shift = shift - (1 << (size + 3)); - size++; - if (size == 3) { - tmp64 = tcg_const_i64(shift); - neon_load_reg64(cpu_V0, rm); - neon_load_reg64(cpu_V1, rm + 1); - for (pass = 0; pass < 2; pass++) { - TCGv_i64 in; - if (pass == 0) { - in = cpu_V0; - } else { - in = cpu_V1; - } - if (q) { - if (input_unsigned) { - gen_helper_neon_rshl_u64(cpu_V0, in, tmp64); - } else { - gen_helper_neon_rshl_s64(cpu_V0, in, tmp64); - } - } else { - if (input_unsigned) { - gen_ushl_i64(cpu_V0, in, tmp64); - } else { - gen_sshl_i64(cpu_V0, in, tmp64); - } - } - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == 8, u, size - 1, tmp, cpu_V0); - neon_store_reg(rd, pass, tmp); - } /* for pass */ - tcg_temp_free_i64(tmp64); - } else { - if (size == 1) { - imm = (uint16_t)shift; - imm |= imm << 16; - } else { - /* size == 2 */ - imm = (uint32_t)shift; - } - tmp2 = tcg_const_i32(imm); - tmp4 = neon_load_reg(rm + 1, 0); - tmp5 = neon_load_reg(rm + 1, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 0) { - tmp = neon_load_reg(rm, 0); - } else { - tmp = tmp4; - } - gen_neon_shift_narrow(size, tmp, tmp2, q, - input_unsigned); - if (pass == 0) { - tmp3 = neon_load_reg(rm, 1); - } else { - tmp3 = tmp5; - } - gen_neon_shift_narrow(size, tmp3, tmp2, q, - input_unsigned); - tcg_gen_concat_i32_i64(cpu_V0, tmp, tmp3); - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(tmp3); - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == 8, u, size - 1, tmp, cpu_V0); - neon_store_reg(rd, pass, tmp); - } /* for pass */ - tcg_temp_free_i32(tmp2); - } - } else if (op == 10) { + if (op == 10) { /* VSHLL, VMOVL */ if (q || (rd & 1)) { return 1; -- 2.20.1 Convert the VSHLL and VMOVL insns from the 2-reg-shift group to decodetree. Since the loop always has two passes, we unroll it to avoid the awkward reassignment of one TCGv to another. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-8-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 16 +++++++ target/arm/translate-neon.inc.c | 81 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 46 +------------------ 3 files changed, 99 insertions(+), 44 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 \ shift=%neon_rshift_i3 +# Long left shifts: again Q is part of opcode decode +@2reg_shll_s .... ... . . . 1 shift:5 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 q=0 +@2reg_shll_h .... ... . . . 01 shift:4 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 +@2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VQSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h VQRSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d VQRSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s VQRSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h + +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b + +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2SN_32(VQSHRN_U16, gen_helper_neon_shl_u16, gen_helper_neon_narrow_sat_u8) DO_2SN_64(VQRSHRN_U64, gen_helper_neon_rshl_u64, gen_helper_neon_narrow_sat_u32) DO_2SN_32(VQRSHRN_U32, gen_helper_neon_rshl_u32, gen_helper_neon_narrow_sat_u16) DO_2SN_32(VQRSHRN_U16, gen_helper_neon_rshl_u16, gen_helper_neon_narrow_sat_u8) + +static bool do_vshll_2sh(DisasContext *s, arg_2reg_shift *a, + NeonGenWidenFn *widenfn, bool u) +{ + TCGv_i64 tmp; + TCGv_i32 rm0, rm1; + uint64_t widen_mask = 0; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vd & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is a widen-and-shift operation. The shift is always less + * than the width of the source type, so after widening the input + * vector we can simply shift the whole 64-bit widened register, + * and then clear the potential overflow bits resulting from left + * bits of the narrow input appearing as right bits of the left + * neighbour narrow input. Calculate a mask of bits to clear. + */ + if ((a->shift != 0) && (a->size < 2 || u)) { + int esize = 8 << a->size; + widen_mask = MAKE_64BIT_MASK(0, esize); + widen_mask >>= esize - a->shift; + widen_mask = dup_const(a->size + 1, widen_mask); + } + + rm0 = neon_load_reg(a->vm, 0); + rm1 = neon_load_reg(a->vm, 1); + tmp = tcg_temp_new_i64(); + + widenfn(tmp, rm0); + if (a->shift != 0) { + tcg_gen_shli_i64(tmp, tmp, a->shift); + tcg_gen_andi_i64(tmp, tmp, ~widen_mask); + } + neon_store_reg64(tmp, a->vd); + + widenfn(tmp, rm1); + if (a->shift != 0) { + tcg_gen_shli_i64(tmp, tmp, a->shift); + tcg_gen_andi_i64(tmp, tmp, ~widen_mask); + } + neon_store_reg64(tmp, a->vd + 1); + tcg_temp_free_i64(tmp); + return true; +} + +static bool trans_VSHLL_S_2sh(DisasContext *s, arg_2reg_shift *a) +{ + NeonGenWidenFn *widenfn[] = { + gen_helper_neon_widen_s8, + gen_helper_neon_widen_s16, + tcg_gen_ext_i32_i64, + }; + return do_vshll_2sh(s, a, widenfn[a->size], false); +} + +static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) +{ + NeonGenWidenFn *widenfn[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + }; + return do_vshll_2sh(s, a, widenfn[a->size], true); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 7: /* VQSHL */ case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ case 9: /* VQSHRN, VQRSHRN */ + case 10: /* VSHLL, including VMOVL */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op == 10) { - /* VSHLL, VMOVL */ - if (q || (rd & 1)) { - return 1; - } - tmp = neon_load_reg(rm, 0); - tmp2 = neon_load_reg(rm, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 1) - tmp = tmp2; - - gen_neon_widen(cpu_V0, tmp, size, u); - - if (shift != 0) { - /* The shift is less than the width of the source - type, so we can just shift the whole register. */ - tcg_gen_shli_i64(cpu_V0, cpu_V0, shift); - /* Widen the result of shift: we need to clear - * the potential overflow bits resulting from - * left bits of the narrow input appearing as - * right bits of left the neighbour narrow - * input. */ - if (size < 2 || !u) { - uint64_t imm64; - if (size == 0) { - imm = (0xffu >> (8 - shift)); - imm |= imm << 16; - } else if (size == 1) { - imm = 0xffff >> (16 - shift); - } else { - /* size == 2 */ - imm = 0xffffffff >> (32 - shift); - } - if (size < 2) { - imm64 = imm | (((uint64_t)imm) << 32); - } else { - imm64 = imm; - } - tcg_gen_andi_i64(cpu_V0, cpu_V0, ~imm64); - } - } - neon_store_reg64(cpu_V0, rd + pass); - } - } else if (op >= 14) { + if (op >= 14) { /* VCVT fixed-point. */ TCGv_ptr fpst; TCGv_i32 shiftv; -- 2.20.1 Convert the VCVT fixed-point conversion operations in the Neon 2-regs-and-shift group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-9-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 11 +++++ target/arm/translate-neon.inc.c | 49 +++++++++++++++++++++ target/arm/translate.c | 75 +-------------------------------- 3 files changed, 62 insertions(+), 73 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0 +# We use size=0 for fp32 and size=1 for fp16 to match the 3-same encodings. +@2reg_vcvt .... ... . . . 1 ..... .... .... . q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i5 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b + +# VCVT fixed<->float conversions +# TODO: FP16 fixed<->float conversions are opc==0b1100 and 0b1101 +VCVT_SF_2sh 1111 001 0 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt +VCVT_UF_2sh 1111 001 1 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt +VCVT_FS_2sh 1111 001 0 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt +VCVT_FU_2sh 1111 001 1 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) }; return do_vshll_2sh(s, a, widenfn[a->size], true); } + +static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoSingleOPFn *fn) +{ + /* FP operations in 2-reg-and-shift group */ + TCGv_i32 tmp, shiftv; + TCGv_ptr fpstatus; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpstatus = get_fpstatus_ptr(1); + shiftv = tcg_const_i32(a->shift); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + tmp = neon_load_reg(a->vm, pass); + fn(tmp, tmp, shiftv, fpstatus); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_ptr(fpstatus); + tcg_temp_free_i32(shiftv); + return true; +} + +#define DO_FP_2SH(INSN, FUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_fp_2sh(s, a, FUNC); \ + } + +DO_FP_2SH(VCVT_SF, gen_helper_vfp_sltos) +DO_FP_2SH(VCVT_UF, gen_helper_vfp_ultos) +DO_FP_2SH(VCVT_FS, gen_helper_vfp_tosls_round_to_zero) +DO_FP_2SH(VCVT_FU, gen_helper_vfp_touls_round_to_zero) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int q; int rd, rn, rm, rd_ofs, rn_ofs, rm_ofs; int size; - int shift; int pass; int u; int vec_size; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } else if (insn & (1 << 4)) { if ((insn & 0x00380080) != 0) { - /* Two registers and shift. */ - op = (insn >> 8) & 0xf; - - switch (op) { - case 0: /* VSHR */ - case 1: /* VSRA */ - case 2: /* VRSHR */ - case 3: /* VRSRA */ - case 4: /* VSRI */ - case 5: /* VSHL, VSLI */ - case 6: /* VQSHLU */ - case 7: /* VQSHL */ - case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ - case 9: /* VQSHRN, VQRSHRN */ - case 10: /* VSHLL, including VMOVL */ - return 1; /* handled by decodetree */ - default: - break; - } - - if (insn & (1 << 7)) { - /* 64-bit shift. */ - if (op > 7) { - return 1; - } - size = 3; - } else { - size = 2; - while ((insn & (1 << (size + 19))) == 0) - size--; - } - shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op >= 14) { - /* VCVT fixed-point. */ - TCGv_ptr fpst; - TCGv_i32 shiftv; - VFPGenFixPointFn *fn; - - if (!(insn & (1 << 21)) || (q && ((rd | rm) & 1))) { - return 1; - } - - if (!(op & 1)) { - if (u) { - fn = gen_helper_vfp_ultos; - } else { - fn = gen_helper_vfp_sltos; - } - } else { - if (u) { - fn = gen_helper_vfp_touls_round_to_zero; - } else { - fn = gen_helper_vfp_tosls_round_to_zero; - } - } - - /* We have already masked out the must-be-1 top bit of imm6, - * hence this 32-shift where the ARM ARM has 64-imm6. - */ - shift = 32 - shift; - fpst = get_fpstatus_ptr(1); - shiftv = tcg_const_i32(shift); - for (pass = 0; pass < (q ? 4 : 2); pass++) { - TCGv_i32 tmpf = neon_load_reg(rm, pass); - fn(tmpf, tmpf, shiftv, fpst); - neon_store_reg(rd, pass, tmpf); - } - tcg_temp_free_ptr(fpst); - tcg_temp_free_i32(shiftv); - } else { - return 1; - } + /* Two registers and shift: handled by decodetree */ + return 1; } else { /* (insn & 0x00380080) == 0 */ int invert, reg_ofs, vec_size; -- 2.20.1 Convert the insns in the one-register-and-immediate group to decodetree. In the new decode, our asimd_imm_const() function returns a 64-bit value rather than a 32-bit one, which means we don't need to treat cmode=14 op=1 as a special case in the decoder (it is the only encoding where the two halves of the 64-bit value are different). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-10-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 22 ++++++ target/arm/translate-neon.inc.c | 118 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 101 +-------------------------- 3 files changed, 142 insertions(+), 99 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VCVT_SF_2sh 1111 001 0 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt VCVT_UF_2sh 1111 001 1 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt VCVT_FS_2sh 1111 001 0 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt VCVT_FU_2sh 1111 001 1 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt + +###################################################################### +# 1-reg-and-modified-immediate grouping: +# 1111 001 i 1 D 000 imm:3 Vd:4 cmode:4 0 Q op 1 Vm:4 +###################################################################### + +&1reg_imm vd q imm cmode op + +%asimd_imm_value 24:1 16:3 0:4 + +@1reg_imm .... ... . . . ... ... .... .... . q:1 . . .... \ + &1reg_imm imm=%asimd_imm_value vd=%vd_dp + +# The cmode/op bits here decode VORR/VBIC/VMOV/VMNV, but +# not in a way we can conveniently represent in decodetree without +# a lot of repetition: +# VORR: op=0, (cmode & 1) && cmode < 12 +# VBIC: op=1, (cmode & 1) && cmode < 12 +# VMOV: everything else +# So we have a single decode line and check the cmode/op in the +# trans function. +Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_FP_2SH(VCVT_SF, gen_helper_vfp_sltos) DO_FP_2SH(VCVT_UF, gen_helper_vfp_ultos) DO_FP_2SH(VCVT_FS, gen_helper_vfp_tosls_round_to_zero) DO_FP_2SH(VCVT_FU, gen_helper_vfp_touls_round_to_zero) + +static uint64_t asimd_imm_const(uint32_t imm, int cmode, int op) +{ + /* + * Expand the encoded constant. + * Note that cmode = 2,3,4,5,6,7,10,11,12,13 imm=0 is UNPREDICTABLE. + * We choose to not special-case this and will behave as if a + * valid constant encoding of 0 had been given. + * cmode = 15 op = 1 must UNDEF; we assume decode has handled that. + */ + switch (cmode) { + case 0: case 1: + /* no-op */ + break; + case 2: case 3: + imm <<= 8; + break; + case 4: case 5: + imm <<= 16; + break; + case 6: case 7: + imm <<= 24; + break; + case 8: case 9: + imm |= imm << 16; + break; + case 10: case 11: + imm = (imm << 8) | (imm << 24); + break; + case 12: + imm = (imm << 8) | 0xff; + break; + case 13: + imm = (imm << 16) | 0xffff; + break; + case 14: + if (op) { + /* + * This is the only case where the top and bottom 32 bits + * of the encoded constant differ. + */ + uint64_t imm64 = 0; + int n; + + for (n = 0; n < 8; n++) { + if (imm & (1 << n)) { + imm64 |= (0xffULL << (n * 8)); + } + } + return imm64; + } + imm |= (imm << 8) | (imm << 16) | (imm << 24); + break; + case 15: + imm = ((imm & 0x80) << 24) | ((imm & 0x3f) << 19) + | ((imm & 0x40) ? (0x1f << 25) : (1 << 30)); + break; + } + if (op) { + imm = ~imm; + } + return dup_const(MO_32, imm); +} + +static bool do_1reg_imm(DisasContext *s, arg_1reg_imm *a, + GVecGen2iFn *fn) +{ + uint64_t imm; + int reg_ofs, vec_size; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { + return false; + } + + if (a->vd & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + reg_ofs = neon_reg_offset(a->vd, 0); + vec_size = a->q ? 16 : 8; + imm = asimd_imm_const(a->imm, a->cmode, a->op); + + fn(MO_64, reg_ofs, reg_ofs, imm, vec_size, vec_size); + return true; +} + +static void gen_VMOV_1r(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t c, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(MO_64, dofs, oprsz, maxsz, c); +} + +static bool trans_Vimm_1r(DisasContext *s, arg_1reg_imm *a) +{ + /* Handle decode of cmode/op here between VORR/VBIC/VMOV */ + GVecGen2iFn *fn; + + if ((a->cmode & 1) && a->cmode < 12) { + /* for op=1, the imm will be inverted, so BIC becomes AND. */ + fn = a->op ? tcg_gen_gvec_andi : tcg_gen_gvec_ori; + } else { + /* There is one unallocated cmode/op combination in this space */ + if (a->cmode == 15 && a->op == 1) { + return false; + } + fn = gen_VMOV_1r; + } + return do_1reg_imm(s, a, fn); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) /* Three register same length: handled by decodetree */ return 1; } else if (insn & (1 << 4)) { - if ((insn & 0x00380080) != 0) { - /* Two registers and shift: handled by decodetree */ - return 1; - } else { /* (insn & 0x00380080) == 0 */ - int invert, reg_ofs, vec_size; - - if (q && (rd & 1)) { - return 1; - } - - op = (insn >> 8) & 0xf; - /* One register and immediate. */ - imm = (u << 7) | ((insn >> 12) & 0x70) | (insn & 0xf); - invert = (insn & (1 << 5)) != 0; - /* Note that op = 2,3,4,5,6,7,10,11,12,13 imm=0 is UNPREDICTABLE. - * We choose to not special-case this and will behave as if a - * valid constant encoding of 0 had been given. - */ - switch (op) { - case 0: case 1: - /* no-op */ - break; - case 2: case 3: - imm <<= 8; - break; - case 4: case 5: - imm <<= 16; - break; - case 6: case 7: - imm <<= 24; - break; - case 8: case 9: - imm |= imm << 16; - break; - case 10: case 11: - imm = (imm << 8) | (imm << 24); - break; - case 12: - imm = (imm << 8) | 0xff; - break; - case 13: - imm = (imm << 16) | 0xffff; - break; - case 14: - imm |= (imm << 8) | (imm << 16) | (imm << 24); - if (invert) { - imm = ~imm; - } - break; - case 15: - if (invert) { - return 1; - } - imm = ((imm & 0x80) << 24) | ((imm & 0x3f) << 19) - | ((imm & 0x40) ? (0x1f << 25) : (1 << 30)); - break; - } - if (invert) { - imm = ~imm; - } - - reg_ofs = neon_reg_offset(rd, 0); - vec_size = q ? 16 : 8; - - if (op & 1 && op < 12) { - if (invert) { - /* The immediate value has already been inverted, - * so BIC becomes AND. - */ - tcg_gen_gvec_andi(MO_32, reg_ofs, reg_ofs, imm, - vec_size, vec_size); - } else { - tcg_gen_gvec_ori(MO_32, reg_ofs, reg_ofs, imm, - vec_size, vec_size); - } - } else { - /* VMOV, VMVN. */ - if (op == 14 && invert) { - TCGv_i64 t64 = tcg_temp_new_i64(); - - for (pass = 0; pass <= q; ++pass) { - uint64_t val = 0; - int n; - - for (n = 0; n < 8; n++) { - if (imm & (1 << (n + pass * 8))) { - val |= 0xffull << (n * 8); - } - } - tcg_gen_movi_i64(t64, val); - neon_store_reg64(t64, rd + pass); - } - tcg_temp_free_i64(t64); - } else { - tcg_gen_gvec_dup_imm(MO_32, reg_ofs, vec_size, - vec_size, imm); - } - } - } + /* Two registers and shift or reg and imm: handled by decodetree */ + return 1; } else { /* (insn & 0x00800010 == 0x00800000) */ if (size != 3) { op = (insn >> 8) & 0xf; -- 2.20.1 Some arm patches; my to-review queue is by no means empty, but this is a big enough set of patches to be getting on with... -- PMM The following changes since commit cb9c6a8e5ad6a1f0ce164d352e3102df46986e22: .gitlab-ci.d/windows: Work-around timeout and OpenGL problems of the MSYS2 jobs (2023-01-04 18:58:33 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230105 for you to fetch changes up to 93c9678de9dc7d2e68f9e8477da072bac30ef132: hw/net: Fix read of uninitialized memory in imx_fec. (2023-01-05 15:33:00 +0000) ---------------------------------------------------------------- target-arm queue: * Implement AArch32 ARMv8-R support * Add Cortex-R52 CPU * fix handling of HLT semihosting in system mode * hw/timer/ixm_epit: cleanup and fix bug in compare handling * target/arm: Coding style fixes * target/arm: Clean up includes * nseries: minor code cleanups * target/arm: align exposed ID registers with Linux * hw/arm/smmu-common: remove unnecessary inlines * i.MX7D: Handle GPT timers * i.MX7D: Connect IRQs to GPIO devices * i.MX6UL: Add a specific GPT timer instance * hw/net: Fix read of uninitialized memory in imx_fec ---------------------------------------------------------------- Alex Bennée (1): target/arm: fix handling of HLT semihosting in system mode Axel Heider (8): hw/timer/imx_epit: improve comments hw/timer/imx_epit: cleanup CR defines hw/timer/imx_epit: define SR_OCIF hw/timer/imx_epit: update interrupt state on CR write access hw/timer/imx_epit: hard reset initializes CR with 0 hw/timer/imx_epit: factor out register write handlers hw/timer/imx_epit: remove explicit fields cnt and freq hw/timer/imx_epit: fix compare timer handling Claudio Fontana (1): target/arm: cleanup cpu includes Fabiano Rosas (5): target/arm: Fix checkpatch comment style warnings in helper.c target/arm: Fix checkpatch space errors in helper.c target/arm: Fix checkpatch brace errors in helper.c target/arm: Remove unused includes from m_helper.c target/arm: Remove unused includes from helper.c Jean-Christophe Dubois (4): i.MX7D: Connect GPT timers to IRQ i.MX7D: Compute clock frequency for the fixed frequency clocks. i.MX6UL: Add a specific GPT timer instance for the i.MX6UL i.MX7D: Connect IRQs to GPIO devices. Peter Maydell (1): target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it Philippe Mathieu-Daudé (5): hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg hw/arm/nseries: Constify various read-only arrays hw/arm/nseries: Silent -Wmissing-field-initializers warning hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope hw/arm/smmu-common: Avoid using inlined functions with external linkage Stephen Longfield (1): hw/net: Fix read of uninitialized memory in imx_fec. Tobias Röhmel (7): target/arm: Don't add all MIDR aliases for cores that implement PMSA target/arm: Make RVBAR available for all ARMv8 CPUs target/arm: Make stage_2_format for cache attributes optional target/arm: Enable TTBCR_EAE for ARMv8-R AArch32 target/arm: Add PMSAv8r registers target/arm: Add PMSAv8r functionality target/arm: Add ARM Cortex-R52 CPU Zhuojia Shen (1): target/arm: align exposed ID registers with Linux include/hw/arm/fsl-imx7.h | 20 + include/hw/arm/smmu-common.h | 3 - include/hw/input/tsc2xxx.h | 4 +- include/hw/timer/imx_epit.h | 8 +- include/hw/timer/imx_gpt.h | 1 + target/arm/cpu.h | 6 + target/arm/internals.h | 4 + hw/arm/fsl-imx6ul.c | 2 +- hw/arm/fsl-imx7.c | 41 +- hw/arm/nseries.c | 28 +- hw/arm/smmu-common.c | 15 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 3 +- hw/misc/imx6ul_ccm.c | 6 - hw/misc/imx7_ccm.c | 49 ++- hw/net/imx_fec.c | 8 +- hw/timer/imx_epit.c | 376 +++++++++------- hw/timer/imx_gpt.c | 25 ++ target/arm/cpu.c | 35 +- target/arm/cpu64.c | 6 - target/arm/cpu_tcg.c | 42 ++ target/arm/debug_helper.c | 3 + target/arm/helper.c | 871 +++++++++++++++++++++++++++++--------- target/arm/m_helper.c | 16 - target/arm/machine.c | 28 ++ target/arm/ptw.c | 152 +++++-- target/arm/tlb_helper.c | 4 + target/arm/translate.c | 2 +- tests/tcg/aarch64/sysregs.c | 24 +- tests/tcg/aarch64/Makefile.target | 7 +- 30 files changed, 1330 insertions(+), 461 deletions(-) In get_phys_addr_twostage() we set the lg_page_size of the result to the maximum of the stage 1 and stage 2 page sizes. This works for the case where we do want to create a TLB entry, because we know the common TLB code only creates entries of the TARGET_PAGE_SIZE and asking for a size larger than that only means that invalidations invalidate the whole larger area. However, if lg_page_size is smaller than TARGET_PAGE_SIZE this effectively means "don't create a TLB entry"; in this case if either S1 or S2 said "this covers less than a page and can't go in a TLB" then the final result also should be marked that way. Set the resulting page size to 0 if either stage asked for a less-than-a-page entry, and expand the comment to explain what's going on. This has no effect for VMSA because currently the VMSA lookup always returns results that cover at least TARGET_PAGE_SIZE; however when we add v8R support it will reuse this code path, and for v8R the S1 and S2 results can be smaller than TARGET_PAGE_SIZE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221212142708.610090-1-peter.maydell@linaro.org --- target/arm/ptw.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw, } /* - * Use the maximum of the S1 & S2 page size, so that invalidation - * of pages > TARGET_PAGE_SIZE works correctly. + * If either S1 or S2 returned a result smaller than TARGET_PAGE_SIZE, + * this means "don't put this in the TLB"; in this case, return a + * result with lg_page_size == 0 to achieve that. Otherwise, + * use the maximum of the S1 & S2 page size, so that invalidation + * of pages > TARGET_PAGE_SIZE works correctly. (This works even though + * we know the combined result permissions etc only cover the minimum + * of the S1 and S2 page size, because we know that the common TLB code + * never actually creates TLB entries bigger than TARGET_PAGE_SIZE, + * and passing a larger page size value only affects invalidations.) */ - if (result->f.lg_page_size < s1_lgpgsz) { + if (result->f.lg_page_size < TARGET_PAGE_BITS || + s1_lgpgsz < TARGET_PAGE_BITS) { + result->f.lg_page_size = 0; + } else if (result->f.lg_page_size < s1_lgpgsz) { result->f.lg_page_size = s1_lgpgsz; } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Cores with PMSA have the MPUIR register which has the same encoding as the MIDR alias with opc2=4. So we only add that alias if we are not realizing a core that implements PMSA. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_NO_RAW, .resetvalue = cpu->midr, .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid), .readfn = midr_read }, - /* crn = 0 op1 = 0 crm = 0 op2 = 4,7 : AArch32 aliases of MIDR */ - { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, - .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, - .access = PL1_R, .resetvalue = cpu->midr }, + /* crn = 0 op1 = 0 crm = 0 op2 = 7 : AArch32 aliases of MIDR */ { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 7, .access = PL1_R, .resetvalue = cpu->midr }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .accessfn = access_aa64_tid1, .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, }; + ARMCPRegInfo id_v8_midr_alias_cp_reginfo = { + .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, + .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, + .access = PL1_R, .resetvalue = cpu->midr + }; ARMCPRegInfo id_cp_reginfo[] = { /* These are common to v8 and pre-v8 */ { .name = "CTR", @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_V8)) { define_arm_cp_regs(cpu, id_v8_midr_cp_reginfo); + if (!arm_feature(env, ARM_FEATURE_PMSA)) { + define_one_arm_cp_reg(cpu, &id_v8_midr_alias_cp_reginfo); + } } else { define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo); } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> RVBAR shadows RVBAR_ELx where x is the highest exception level if the highest EL is not EL3. This patch also allows ARMv8 CPUs to change the reset address with the rvbar property. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 +++++- target/arm/helper.c | 21 ++++++++++++++------- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, CPACR, CP11, 3); #endif + if (arm_feature(env, ARM_FEATURE_V8)) { + env->cp15.rvbar = cpu->rvbar_prop; + env->regs[15] = cpu->rvbar_prop; + } } #if defined(CONFIG_USER_ONLY) @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_hivecs_property); } - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { object_property_add_uint64_ptr(obj, "rvbar", &cpu->rvbar_prop, OBJ_PROP_FLAG_READWRITE); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (!arm_feature(env, ARM_FEATURE_EL3) && !arm_feature(env, ARM_FEATURE_EL2)) { ARMCPRegInfo rvbar = { - .name = "RVBAR_EL1", .state = ARM_CP_STATE_AA64, + .name = "RVBAR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, .access = PL1_R, .fieldoffset = offsetof(CPUARMState, cp15.rvbar), @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } /* RVBAR_EL2 is only implemented if EL2 is the highest EL */ if (!arm_feature(env, ARM_FEATURE_EL3)) { - ARMCPRegInfo rvbar = { - .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1, - .access = PL2_R, - .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + ARMCPRegInfo rvbar[] = { + { + .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1, + .access = PL2_R, + .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + }, + { .name = "RVBAR", .type = ARM_CP_ALIAS, + .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, + .access = PL2_R, + .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + }, }; - define_one_arm_cp_reg(cpu, &rvbar); + define_arm_cp_regs(cpu, rvbar); } } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> The v8R PMSAv8 has a two-stage MPU translation process, but, unlike VMSAv8, the stage 2 attributes are in the same format as the stage 1 attributes (8-bit MAIR format). Rather than converting the MAIR format to the format used for VMSA stage 2 (bits [5:2] of a VMSA stage 2 descriptor) and then converting back to do the attribute combination, allow combined_attrs_nofwb() to accept s2 attributes that are already in the MAIR format. We move the assert() to combined_attrs_fwb(), because that function really does require a VMSA stage 2 attribute format. (We will never get there for v8R, because PMSAv8 does not implement FEAT_S2FWB.) Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-4-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static uint8_t combined_attrs_nofwb(uint64_t hcr, { uint8_t s1lo, s2lo, s1hi, s2hi, s2_mair_attrs, ret_attrs; - s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs); + if (s2.is_s2_format) { + s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs); + } else { + s2_mair_attrs = s2.attrs; + } s1lo = extract32(s1.attrs, 0, 4); s2lo = extract32(s2_mair_attrs, 0, 4); @@ -XXX,XX +XXX,XX @@ static uint8_t force_cacheattr_nibble_wb(uint8_t attr) */ static uint8_t combined_attrs_fwb(ARMCacheAttrs s1, ARMCacheAttrs s2) { + assert(s2.is_s2_format && !s1.is_s2_format); + switch (s2.attrs) { case 7: /* Use stage 1 attributes */ @@ -XXX,XX +XXX,XX @@ static ARMCacheAttrs combine_cacheattrs(uint64_t hcr, ARMCacheAttrs ret; bool tagged = false; - assert(s2.is_s2_format && !s1.is_s2_format); + assert(!s1.is_s2_format); ret.is_s2_format = false; if (s1.attrs == 0xf0) { -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> ARMv8-R AArch32 CPUs behave as if TTBCR.EAE is always 1 even tough they don't have the TTBCR register. See ARM Architecture Reference Manual Supplement - ARMv8, for the ARMv8-R AArch32 architecture profile Version:A.c section C1.2. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-5-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 4 ++++ target/arm/debug_helper.c | 3 +++ target/arm/tlb_helper.c | 4 ++++ 3 files changed, 11 insertions(+) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ unsigned int arm_pamax(ARMCPU *cpu); static inline bool extended_addresses_enabled(CPUARMState *env) { uint64_t tcr = env->cp15.tcr_el[arm_is_secure(env) ? 3 : 1]; + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + return true; + } return arm_el_is_aa64(env, 1) || (arm_feature(env, ARM_FEATURE_LPAE) && (tcr & TTBCR_EAE)); } diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t arm_debug_exception_fsr(CPUARMState *env) if (target_el == 2 || arm_el_is_aa64(env, target_el)) { using_lpae = true; + } else if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + using_lpae = true; } else { if (arm_feature(env, ARM_FEATURE_LPAE) && (env->cp15.tcr_el[target_el] & TTBCR_EAE)) { diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ bool regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx) if (el == 2 || arm_el_is_aa64(env, el)) { return true; } + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + return true; + } if (arm_feature(env, ARM_FEATURE_LPAE) && (regime_tcr(env, mmu_idx) & TTBCR_EAE)) { return true; -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Message-id: 20221206102504.165775-6-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 + target/arm/cpu.c | 28 +++- target/arm/helper.c | 302 +++++++++++++++++++++++++++++++++++++++++++ target/arm/machine.c | 28 ++++ 4 files changed, 360 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { }; uint64_t sctlr_el[4]; }; + uint64_t vsctlr; /* Virtualization System control register. */ uint64_t cpacr_el1; /* Architectural feature access control register */ uint64_t cptr_el[4]; /* ARMv8 feature trap registers */ uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */ @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { */ uint32_t *rbar[M_REG_NUM_BANKS]; uint32_t *rlar[M_REG_NUM_BANKS]; + uint32_t *hprbar; + uint32_t *hprlar; uint32_t mair0[M_REG_NUM_BANKS]; uint32_t mair1[M_REG_NUM_BANKS]; + uint32_t hprselr; } pmsav8; /* v8M SAU */ @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool has_mpu; /* PMSAv7 MPU number of supported regions */ uint32_t pmsav7_dregion; + /* PMSAv8 MPU number of supported hyp regions */ + uint32_t pmsav8r_hdregion; /* v8M SAU number of supported regions */ uint32_t sau_sregion; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) sizeof(*env->pmsav7.dracr) * cpu->pmsav7_dregion); } } + + if (cpu->pmsav8r_hdregion > 0) { + memset(env->pmsav8.hprbar, 0, + sizeof(*env->pmsav8.hprbar) * cpu->pmsav8r_hdregion); + memset(env->pmsav8.hprlar, 0, + sizeof(*env->pmsav8.hprlar) * cpu->pmsav8r_hdregion); + } + env->pmsav7.rnr[M_REG_NS] = 0; env->pmsav7.rnr[M_REG_S] = 0; env->pmsav8.mair0[M_REG_NS] = 0; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* MPU can be configured out of a PMSA CPU either by setting has-mpu * to false or by setting pmsav7-dregion to 0. */ - if (!cpu->has_mpu) { - cpu->pmsav7_dregion = 0; - } - if (cpu->pmsav7_dregion == 0) { + if (!cpu->has_mpu || cpu->pmsav7_dregion == 0) { cpu->has_mpu = false; + cpu->pmsav7_dregion = 0; + cpu->pmsav8r_hdregion = 0; } if (arm_feature(env, ARM_FEATURE_PMSA) && @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) env->pmsav7.dracr = g_new0(uint32_t, nr); } } + + if (cpu->pmsav8r_hdregion > 0xff) { + error_setg(errp, "PMSAv8 MPU EL2 #regions invalid %" PRIu32, + cpu->pmsav8r_hdregion); + return; + } + + if (cpu->pmsav8r_hdregion) { + env->pmsav8.hprbar = g_new0(uint32_t, + cpu->pmsav8r_hdregion); + env->pmsav8.hprlar = g_new0(uint32_t, + cpu->pmsav8r_hdregion); + } } if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void pmsav7_rgnr_write(CPUARMState *env, const ARMCPRegInfo *ri, raw_write(env, ri, value); } +static void prbar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value; +} + +static uint64_t prbar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]]; +} + +static void prlar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value; +} + +static uint64_t prlar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]]; +} + +static void prselr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + /* + * Ignore writes that would select not implemented region. + * This is architecturally UNPREDICTABLE. + */ + if (value >= cpu->pmsav7_dregion) { + return; + } + + env->pmsav7.rnr[M_REG_NS] = value; +} + +static void hprbar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.hprbar[env->pmsav8.hprselr] = value; +} + +static uint64_t hprbar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.hprbar[env->pmsav8.hprselr]; +} + +static void hprlar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.hprlar[env->pmsav8.hprselr] = value; +} + +static uint64_t hprlar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.hprlar[env->pmsav8.hprselr]; +} + +static void hprenr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + uint32_t n; + uint32_t bit; + ARMCPU *cpu = env_archcpu(env); + + /* Ignore writes to unimplemented regions */ + int rmax = MIN(cpu->pmsav8r_hdregion, 32); + value &= MAKE_64BIT_MASK(0, rmax); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + + /* Register alias is only valid for first 32 indexes */ + for (n = 0; n < rmax; ++n) { + bit = extract32(value, n, 1); + env->pmsav8.hprlar[n] = deposit32( + env->pmsav8.hprlar[n], 0, 1, bit); + } +} + +static uint64_t hprenr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + uint32_t n; + uint32_t result = 0x0; + ARMCPU *cpu = env_archcpu(env); + + /* Register alias is only valid for first 32 indexes */ + for (n = 0; n < MIN(cpu->pmsav8r_hdregion, 32); ++n) { + if (env->pmsav8.hprlar[n] & 0x1) { + result |= (0x1 << n); + } + } + return result; +} + +static void hprselr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + /* + * Ignore writes that would select not implemented region. + * This is architecturally UNPREDICTABLE. + */ + if (value >= cpu->pmsav8r_hdregion) { + return; + } + + env->pmsav8.hprselr = value; +} + +static void pmsav8r_regn_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + uint8_t index = (extract32(ri->opc0, 0, 1) << 4) | + (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + + if (ri->opc1 & 4) { + if (index >= cpu->pmsav8r_hdregion) { + return; + } + if (ri->opc2 & 0x1) { + env->pmsav8.hprlar[index] = value; + } else { + env->pmsav8.hprbar[index] = value; + } + } else { + if (index >= cpu->pmsav7_dregion) { + return; + } + if (ri->opc2 & 0x1) { + env->pmsav8.rlar[M_REG_NS][index] = value; + } else { + env->pmsav8.rbar[M_REG_NS][index] = value; + } + } +} + +static uint64_t pmsav8r_regn_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = env_archcpu(env); + uint8_t index = (extract32(ri->opc0, 0, 1) << 4) | + (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1); + + if (ri->opc1 & 4) { + if (index >= cpu->pmsav8r_hdregion) { + return 0x0; + } + if (ri->opc2 & 0x1) { + return env->pmsav8.hprlar[index]; + } else { + return env->pmsav8.hprbar[index]; + } + } else { + if (index >= cpu->pmsav7_dregion) { + return 0x0; + } + if (ri->opc2 & 0x1) { + return env->pmsav8.rlar[M_REG_NS][index]; + } else { + return env->pmsav8.rbar[M_REG_NS][index]; + } + } +} + +static const ARMCPRegInfo pmsav8r_cp_reginfo[] = { + { .name = "PRBAR", + .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_NO_RAW, + .accessfn = access_tvm_trvm, + .readfn = prbar_read, .writefn = prbar_write }, + { .name = "PRLAR", + .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_NO_RAW, + .accessfn = access_tvm_trvm, + .readfn = prlar_read, .writefn = prlar_write }, + { .name = "PRSELR", .resetvalue = 0, + .cp = 15, .opc1 = 0, .crn = 6, .crm = 2, .opc2 = 1, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = prselr_write, + .fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]) }, + { .name = "HPRBAR", .resetvalue = 0, + .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprbar_read, .writefn = hprbar_write }, + { .name = "HPRLAR", + .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 1, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprlar_read, .writefn = hprlar_write }, + { .name = "HPRSELR", .resetvalue = 0, + .cp = 15, .opc1 = 4, .crn = 6, .crm = 2, .opc2 = 1, + .access = PL2_RW, + .writefn = hprselr_write, + .fieldoffset = offsetof(CPUARMState, pmsav8.hprselr) }, + { .name = "HPRENR", + .cp = 15, .opc1 = 4, .crn = 6, .crm = 1, .opc2 = 1, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprenr_read, .writefn = hprenr_write }, +}; + static const ARMCPRegInfo pmsav7_cp_reginfo[] = { /* Reset for all these registers is handled in arm_cpu_reset(), * because the PMSAv7 is also used by M-profile CPUs, which do @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->pmsav7_dregion << 8 }; + /* HMPUIR is specific to PMSA V8 */ + ARMCPRegInfo id_hmpuir_reginfo = { + .name = "HMPUIR", + .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL2_R, .type = ARM_CP_CONST, + .resetvalue = cpu->pmsav8r_hdregion + }; static const ARMCPRegInfo crn0_wi_reginfo = { .name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, id_cp_reginfo); if (!arm_feature(env, ARM_FEATURE_PMSA)) { define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo); + } else if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + uint32_t i = 0; + char *tmp_string; + + define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); + define_one_arm_cp_reg(cpu, &id_hmpuir_reginfo); + define_arm_cp_regs(cpu, pmsav8r_cp_reginfo); + + /* Register alias is only valid for first 32 indexes */ + for (i = 0; i < MIN(cpu->pmsav7_dregion, 32); ++i) { + uint8_t crm = 0b1000 | extract32(i, 1, 3); + uint8_t opc1 = extract32(i, 4, 1); + uint8_t opc2 = extract32(i, 0, 1) << 2; + + tmp_string = g_strdup_printf("PRBAR%u", i); + ARMCPRegInfo tmp_prbarn_reginfo = { + .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL1_RW, .resetvalue = 0, + .accessfn = access_tvm_trvm, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_prbarn_reginfo); + g_free(tmp_string); + + opc2 = extract32(i, 0, 1) << 2 | 0x1; + tmp_string = g_strdup_printf("PRLAR%u", i); + ARMCPRegInfo tmp_prlarn_reginfo = { + .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL1_RW, .resetvalue = 0, + .accessfn = access_tvm_trvm, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_prlarn_reginfo); + g_free(tmp_string); + } + + /* Register alias is only valid for first 32 indexes */ + for (i = 0; i < MIN(cpu->pmsav8r_hdregion, 32); ++i) { + uint8_t crm = 0b1000 | extract32(i, 1, 3); + uint8_t opc1 = 0b100 | extract32(i, 4, 1); + uint8_t opc2 = extract32(i, 0, 1) << 2; + + tmp_string = g_strdup_printf("HPRBAR%u", i); + ARMCPRegInfo tmp_hprbarn_reginfo = { + .name = tmp_string, + .type = ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL2_RW, .resetvalue = 0, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_hprbarn_reginfo); + g_free(tmp_string); + + opc2 = extract32(i, 0, 1) << 2 | 0x1; + tmp_string = g_strdup_printf("HPRLAR%u", i); + ARMCPRegInfo tmp_hprlarn_reginfo = { + .name = tmp_string, + .type = ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL2_RW, .resetvalue = 0, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_hprlarn_reginfo); + g_free(tmp_string); + } } else if (arm_feature(env, ARM_FEATURE_V7)) { define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); } @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) sctlr.type |= ARM_CP_SUPPRESS_TB_END; } define_one_arm_cp_reg(cpu, &sctlr); + + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + ARMCPRegInfo vsctlr = { + .name = "VSCTLR", .state = ARM_CP_STATE_AA32, + .cp = 15, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, + .access = PL2_RW, .resetvalue = 0x0, + .fieldoffset = offsetoflow32(CPUARMState, cp15.vsctlr), + }; + define_one_arm_cp_reg(cpu, &vsctlr); + } } if (cpu_isar_feature(aa64_lor, cpu)) { diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool pmsav8_needed(void *opaque) arm_feature(env, ARM_FEATURE_V8); } +static bool pmsav8r_needed(void *opaque) +{ + ARMCPU *cpu = opaque; + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8) && + !arm_feature(env, ARM_FEATURE_M); +} + +static const VMStateDescription vmstate_pmsav8r = { + .name = "cpu/pmsav8/pmsav8r", + .version_id = 1, + .minimum_version_id = 1, + .needed = pmsav8r_needed, + .fields = (VMStateField[]) { + VMSTATE_VARRAY_UINT32(env.pmsav8.hprbar, ARMCPU, + pmsav8r_hdregion, 0, vmstate_info_uint32, uint32_t), + VMSTATE_VARRAY_UINT32(env.pmsav8.hprlar, ARMCPU, + pmsav8r_hdregion, 0, vmstate_info_uint32, uint32_t), + VMSTATE_END_OF_LIST() + }, +}; + static const VMStateDescription vmstate_pmsav8 = { .name = "cpu/pmsav8", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pmsav8 = { VMSTATE_UINT32(env.pmsav8.mair0[M_REG_NS], ARMCPU), VMSTATE_UINT32(env.pmsav8.mair1[M_REG_NS], ARMCPU), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_pmsav8r, + NULL } }; -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Add PMSAv8r translation. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-7-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 126 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 104 insertions(+), 22 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx, if (arm_feature(env, ARM_FEATURE_M)) { return env->v7m.mpu_ctrl[is_secure] & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; - } else { - return regime_sctlr(env, mmu_idx) & SCTLR_BR; } + + if (mmu_idx == ARMMMUIdx_Stage2) { + return false; + } + + return regime_sctlr(env, mmu_idx) & SCTLR_BR; } static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, return !(result->f.prot & (1 << access_type)); } +static uint32_t *regime_rbar(CPUARMState *env, ARMMMUIdx mmu_idx, + uint32_t secure) +{ + if (regime_el(env, mmu_idx) == 2) { + return env->pmsav8.hprbar; + } else { + return env->pmsav8.rbar[secure]; + } +} + +static uint32_t *regime_rlar(CPUARMState *env, ARMMMUIdx mmu_idx, + uint32_t secure) +{ + if (regime_el(env, mmu_idx) == 2) { + return env->pmsav8.hprlar; + } else { + return env->pmsav8.rlar[secure]; + } +} + bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, bool secure, GetPhysAddrResult *result, @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, bool hit = false; uint32_t addr_page_base = address & TARGET_PAGE_MASK; uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1); + int region_counter; + + if (regime_el(env, mmu_idx) == 2) { + region_counter = cpu->pmsav8r_hdregion; + } else { + region_counter = cpu->pmsav7_dregion; + } result->f.lg_page_size = TARGET_PAGE_BITS; result->f.phys_addr = address; @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, *mregion = -1; } + if (mmu_idx == ARMMMUIdx_Stage2) { + fi->stage2 = true; + } + /* * Unlike the ARM ARM pseudocode, we don't need to check whether this * was an exception vector read from the vector table (which is always @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, hit = true; } - for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) { + uint32_t bitmask; + if (arm_feature(env, ARM_FEATURE_M)) { + bitmask = 0x1f; + } else { + bitmask = 0x3f; + fi->level = 0; + } + + for (n = region_counter - 1; n >= 0; n--) { /* region search */ /* - * Note that the base address is bits [31:5] from the register - * with bits [4:0] all zeroes, but the limit address is bits - * [31:5] from the register with bits [4:0] all ones. + * Note that the base address is bits [31:x] from the register + * with bits [x-1:0] all zeroes, but the limit address is bits + * [31:x] from the register with bits [x:0] all ones. Where x is + * 5 for Cortex-M and 6 for Cortex-R */ - uint32_t base = env->pmsav8.rbar[secure][n] & ~0x1f; - uint32_t limit = env->pmsav8.rlar[secure][n] | 0x1f; + uint32_t base = regime_rbar(env, mmu_idx, secure)[n] & ~bitmask; + uint32_t limit = regime_rlar(env, mmu_idx, secure)[n] | bitmask; - if (!(env->pmsav8.rlar[secure][n] & 0x1)) { + if (!(regime_rlar(env, mmu_idx, secure)[n] & 0x1)) { /* Region disabled */ continue; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, * PMSAv7 where highest-numbered-region wins) */ fi->type = ARMFault_Permission; - fi->level = 1; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->level = 1; + } return true; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } if (!hit) { - /* background fault */ - fi->type = ARMFault_Background; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->type = ARMFault_Background; + } else { + fi->type = ARMFault_Permission; + } return true; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, /* hit using the background region */ get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->f.prot); } else { - uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2); - uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1); + uint32_t matched_rbar = regime_rbar(env, mmu_idx, secure)[matchregion]; + uint32_t matched_rlar = regime_rlar(env, mmu_idx, secure)[matchregion]; + uint32_t ap = extract32(matched_rbar, 1, 2); + uint32_t xn = extract32(matched_rbar, 0, 1); bool pxn = false; if (arm_feature(env, ARM_FEATURE_V8_1M)) { - pxn = extract32(env->pmsav8.rlar[secure][matchregion], 4, 1); + pxn = extract32(matched_rlar, 4, 1); } if (m_is_system_region(env, address)) { @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, xn = 1; } - result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap); + if (regime_el(env, mmu_idx) == 2) { + result->f.prot = simple_ap_to_rw_prot_is_user(ap, + mmu_idx != ARMMMUIdx_E2); + } else { + result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap); + } + + if (!arm_feature(env, ARM_FEATURE_M)) { + uint8_t attrindx = extract32(matched_rlar, 1, 3); + uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)]; + uint8_t sh = extract32(matched_rlar, 3, 2); + + if (regime_sctlr(env, mmu_idx) & SCTLR_WXN && + result->f.prot & PAGE_WRITE && mmu_idx != ARMMMUIdx_Stage2) { + xn = 0x1; + } + + if ((regime_el(env, mmu_idx) == 1) && + regime_sctlr(env, mmu_idx) & SCTLR_UWXN && ap == 0x1) { + pxn = 0x1; + } + + result->cacheattrs.is_s2_format = false; + result->cacheattrs.attrs = extract64(mair, attrindx * 8, 8); + result->cacheattrs.shareability = sh; + } + if (result->f.prot && !xn && !(pxn && !is_user)) { result->f.prot |= PAGE_EXEC; } - /* - * We don't need to look the attribute up in the MAIR0/MAIR1 - * registers because that only tells us about cacheability. - */ + if (mregion) { *mregion = matchregion; } } fi->type = ARMFault_Permission; - fi->level = 1; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->level = 1; + } return !(result->f.prot & (1 << access_type)); } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw, cacheattrs1 = result->cacheattrs; memset(result, 0, sizeof(*result)); - ret = get_phys_addr_lpae(env, ptw, ipa, access_type, is_el0, result, fi); + if (arm_feature(env, ARM_FEATURE_PMSA)) { + ret = get_phys_addr_pmsav8(env, ipa, access_type, + ptw->in_mmu_idx, is_secure, result, fi); + } else { + ret = get_phys_addr_lpae(env, ptw, ipa, access_type, + is_el0, result, fi); + } fi->s2addr = ipa; /* Combine the S1 and S2 perms. */ -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> All constants are taken from the ARM Cortex-R52 Processor TRM Revision: r1p3 Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-8-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) define_arm_cp_regs(cpu, cortexr5_cp_reginfo); } +static void cortex_r52_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_PMSA); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + cpu->midr = 0x411fd133; /* r1p3 */ + cpu->revidr = 0x00000000; + cpu->reset_fpsid = 0x41034023; + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x12111111; + cpu->isar.mvfr2 = 0x00000043; + cpu->ctr = 0x8144c004; + cpu->reset_sctlr = 0x30c50838; + cpu->isar.id_pfr0 = 0x00000131; + cpu->isar.id_pfr1 = 0x10111001; + cpu->isar.id_dfr0 = 0x03010006; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00211040; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01200000; + cpu->isar.id_mmfr3 = 0xf0102211; + cpu->isar.id_mmfr4 = 0x00000010; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232142; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x00010001; + cpu->isar.dbgdidr = 0x77168000; + cpu->clidr = (1 << 27) | (1 << 24) | 0x3; + cpu->ccsidr[0] = 0x700fe01a; /* 32KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe00a; /* 32KB L1 icache */ + + cpu->pmsav7_dregion = 16; + cpu->pmsav8r_hdregion = 16; +} + static void cortex_r5f_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, + { .name = "cortex-r52", .initfn = cortex_r52_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, { .name = "sa1100", .initfn = sa1100_initfn }, { .name = "sa1110", .initfn = sa1110_initfn }, -- 2.25.1 From: Alex Bennée <alex.bennee@linaro.org> The check semihosting_enabled() wants to know if the guest is currently in user mode. Unlike the other cases the test was inverted causing us to block semihosting calls in non-EL0 modes. Cc: qemu-stable@nongnu.org Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_hlt(DisasContext *s, int imm) * semihosting, to provide some semblance of security * (and for consistency with our 32-bit semihosting). */ - if (semihosting_enabled(s->current_el != 0) && + if (semihosting_enabled(s->current_el == 0) && (imm == (s->thumb ? 0x3c : 0xf000))) { gen_exception_internal_insn(s, EXCP_SEMIHOST); return; -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Fix typos, add background information Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) } } +/* + * This is called both on hardware (device) reset and software reset. + */ static void imx_epit_reset(DeviceState *dev) { IMXEPITState *s = IMX_EPIT(dev); - /* - * Soft reset doesn't touch some bits; hard reset clears them - */ + /* Soft reset doesn't touch some bits; hard reset clears them */ s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); s->sr = 0; s->lr = EPIT_TIMER_MAX; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); + /* Update the frequency. Has been done already in case of a reset. */ if (!(s->cr & CR_SWR)) { imx_epit_set_freq(s); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, break; case 1: /* SR - ACK*/ - /* writing 1 to OCIF clear the OCIF bit */ + /* writing 1 to OCIF clears the OCIF bit */ if (value & 0x01) { s->sr = 0; imx_epit_update_int(s); @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) 0x00001000); sysbus_init_mmio(sbd, &s->iomem); + /* + * The reload timer keeps running when the peripheral is enabled. It is a + * kind of wall clock that does not generate any interrupts. The callback + * needs to be provided, but it does nothing as the ptimer already supports + * all necessary reloading functionality. + */ s->timer_reload = ptimer_init(imx_epit_reload, s, PTIMER_POLICY_LEGACY); + /* + * The compare timer is running only when the peripheral configuration is + * in a state that will generate compare interrupts. + */ s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY); } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> remove unused defines, add needed defines Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 4 ++-- hw/timer/imx_epit.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ #define CR_OCIEN (1 << 2) #define CR_RLD (1 << 3) #define CR_PRESCALE_SHIFT (4) -#define CR_PRESCALE_MASK (0xfff) +#define CR_PRESCALE_BITS (12) #define CR_SWR (1 << 16) #define CR_IOVW (1 << 17) #define CR_DBGEN (1 << 18) @@ -XXX,XX +XXX,XX @@ #define CR_DOZEN (1 << 20) #define CR_STOPEN (1 << 21) #define CR_CLKSRC_SHIFT (24) -#define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT) +#define CR_CLKSRC_BITS (2) #define EPIT_TIMER_MAX 0XFFFFFFFFUL diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) uint32_t clksrc; uint32_t prescaler; - clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2); - prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12); + clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); + prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); s->freq = imx_ccm_get_clock_frequency(s->ccm, imx_epit_clocks[clksrc]) / prescaler; -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 2 ++ hw/timer/imx_epit.c | 12 ++++++------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ #define CR_CLKSRC_SHIFT (24) #define CR_CLKSRC_BITS (2) +#define SR_OCIF (1 << 0) + #define EPIT_TIMER_MAX 0XFFFFFFFFUL #define TYPE_IMX_EPIT "imx.epit" diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static const IMXClk imx_epit_clocks[] = { */ static void imx_epit_update_int(IMXEPITState *s) { - if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) { + if ((s->sr & SR_OCIF) && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) { qemu_irq_raise(s->irq); } else { qemu_irq_lower(s->irq); @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, break; case 1: /* SR - ACK*/ - /* writing 1 to OCIF clears the OCIF bit */ - if (value & 0x01) { - s->sr = 0; + /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ + if (value & SR_OCIF) { + s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ imx_epit_update_int(s); } break; @@ -XXX,XX +XXX,XX @@ static void imx_epit_cmp(void *opaque) IMXEPITState *s = IMX_EPIT(opaque); DPRINTF("sr was %d\n", s->sr); - - s->sr = 1; + /* Set interrupt status bit SR.OCIF and update the interrupt state */ + s->sr |= SR_OCIF; imx_epit_update_int(s); } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> The interrupt state can change due to: - reset clears both SR.OCIF and CR.OCIE - write to CR.EN or CR.OCIE Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, if (s->cr & CR_SWR) { /* handle the reset */ imx_epit_reset(DEVICE(s)); - /* - * TODO: could we 'break' here? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ } + /* + * The interrupt state can change due to: + * - reset clears both SR.OCIF and CR.OCIE + * - write to CR.EN or CR.OCIE + */ + imx_epit_update_int(s); + + /* + * TODO: could we 'break' here for reset? following operations appear + * to duplicate the work imx_epit_reset() already did. + */ + ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) /* * This is called both on hardware (device) reset and software reset. */ -static void imx_epit_reset(DeviceState *dev) +static void imx_epit_reset(IMXEPITState *s, bool is_hard_reset) { - IMXEPITState *s = IMX_EPIT(dev); - /* Soft reset doesn't touch some bits; hard reset clears them */ - s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); + if (is_hard_reset) { + s->cr = 0; + } else { + s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); + } s->sr = 0; s->lr = EPIT_TIMER_MAX; s->cmp = 0; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, s->cr = value & 0x03ffffff; if (s->cr & CR_SWR) { /* handle the reset */ - imx_epit_reset(DEVICE(s)); + imx_epit_reset(s, false); } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY); } +static void imx_epit_dev_reset(DeviceState *dev) +{ + IMXEPITState *s = IMX_EPIT(dev); + imx_epit_reset(s, true); +} + static void imx_epit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->realize = imx_epit_realize; - dc->reset = imx_epit_reset; + dc->reset = imx_epit_dev_reset; dc->vmsd = &vmstate_imx_timer_epit; dc->desc = "i.MX periodic timer"; } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 215 ++++++++++++++++++++++++-------------------- 1 file changed, 117 insertions(+), 98 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) } } +static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) +{ + uint32_t oldcr = s->cr; + + s->cr = value & 0x03ffffff; + + if (s->cr & CR_SWR) { + /* handle the reset */ + imx_epit_reset(s, false); + } + + /* + * The interrupt state can change due to: + * - reset clears both SR.OCIF and CR.OCIE + * - write to CR.EN or CR.OCIE + */ + imx_epit_update_int(s); + + /* + * TODO: could we 'break' here for reset? following operations appear + * to duplicate the work imx_epit_reset() already did. + */ + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + + /* Update the frequency. Has been done already in case of a reset. */ + if (!(s->cr & CR_SWR)) { + imx_epit_set_freq(s); + } + + if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { + if (s->cr & CR_ENMOD) { + if (s->cr & CR_RLD) { + ptimer_set_limit(s->timer_reload, s->lr, 1); + ptimer_set_limit(s->timer_cmp, s->lr, 1); + } else { + ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); + ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); + } + } + + imx_epit_reload_compare_timer(s); + ptimer_run(s->timer_reload, 0); + if (s->cr & CR_OCIEN) { + ptimer_run(s->timer_cmp, 0); + } else { + ptimer_stop(s->timer_cmp); + } + } else if (!(s->cr & CR_EN)) { + /* stop both timers */ + ptimer_stop(s->timer_reload); + ptimer_stop(s->timer_cmp); + } else if (s->cr & CR_OCIEN) { + if (!(oldcr & CR_OCIEN)) { + imx_epit_reload_compare_timer(s); + ptimer_run(s->timer_cmp, 0); + } + } else { + ptimer_stop(s->timer_cmp); + } + + ptimer_transaction_commit(s->timer_cmp); + ptimer_transaction_commit(s->timer_reload); +} + +static void imx_epit_write_sr(IMXEPITState *s, uint32_t value) +{ + /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ + if (value & SR_OCIF) { + s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ + imx_epit_update_int(s); + } +} + +static void imx_epit_write_lr(IMXEPITState *s, uint32_t value) +{ + s->lr = value; + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + if (s->cr & CR_RLD) { + /* Also set the limit if the LRD bit is set */ + /* If IOVW bit is set then set the timer value */ + ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW); + ptimer_set_limit(s->timer_cmp, s->lr, 0); + } else if (s->cr & CR_IOVW) { + /* If IOVW bit is set then set the timer value */ + ptimer_set_count(s->timer_reload, s->lr); + } + /* + * Commit the change to s->timer_reload, so it can propagate. Otherwise + * the timer interrupt may not fire properly. The commit must happen + * before calling imx_epit_reload_compare_timer(), which reads + * s->timer_reload internally again. + */ + ptimer_transaction_commit(s->timer_reload); + imx_epit_reload_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); +} + +static void imx_epit_write_cmp(IMXEPITState *s, uint32_t value) +{ + s->cmp = value; + + ptimer_transaction_begin(s->timer_cmp); + imx_epit_reload_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); +} + static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { IMXEPITState *s = IMX_EPIT(opaque); - uint64_t oldcr; DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(offset >> 2), (uint32_t)value); switch (offset >> 2) { case 0: /* CR */ - - oldcr = s->cr; - s->cr = value & 0x03ffffff; - if (s->cr & CR_SWR) { - /* handle the reset */ - imx_epit_reset(s, false); - } - - /* - * The interrupt state can change due to: - * - reset clears both SR.OCIF and CR.OCIE - * - write to CR.EN or CR.OCIE - */ - imx_epit_update_int(s); - - /* - * TODO: could we 'break' here for reset? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - - /* Update the frequency. Has been done already in case of a reset. */ - if (!(s->cr & CR_SWR)) { - imx_epit_set_freq(s); - } - - if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { - if (s->cr & CR_ENMOD) { - if (s->cr & CR_RLD) { - ptimer_set_limit(s->timer_reload, s->lr, 1); - ptimer_set_limit(s->timer_cmp, s->lr, 1); - } else { - ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); - } - } - - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_reload, 0); - if (s->cr & CR_OCIEN) { - ptimer_run(s->timer_cmp, 0); - } else { - ptimer_stop(s->timer_cmp); - } - } else if (!(s->cr & CR_EN)) { - /* stop both timers */ - ptimer_stop(s->timer_reload); - ptimer_stop(s->timer_cmp); - } else if (s->cr & CR_OCIEN) { - if (!(oldcr & CR_OCIEN)) { - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_cmp, 0); - } - } else { - ptimer_stop(s->timer_cmp); - } - - ptimer_transaction_commit(s->timer_cmp); - ptimer_transaction_commit(s->timer_reload); + imx_epit_write_cr(s, (uint32_t)value); break; - case 1: /* SR - ACK*/ - /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ - if (value & SR_OCIF) { - s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ - imx_epit_update_int(s); - } + case 1: /* SR */ + imx_epit_write_sr(s, (uint32_t)value); break; - case 2: /* LR - set ticks */ - s->lr = value; - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - if (s->cr & CR_RLD) { - /* Also set the limit if the LRD bit is set */ - /* If IOVW bit is set then set the timer value */ - ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW); - ptimer_set_limit(s->timer_cmp, s->lr, 0); - } else if (s->cr & CR_IOVW) { - /* If IOVW bit is set then set the timer value */ - ptimer_set_count(s->timer_reload, s->lr); - } - /* - * Commit the change to s->timer_reload, so it can propagate. Otherwise - * the timer interrupt may not fire properly. The commit must happen - * before calling imx_epit_reload_compare_timer(), which reads - * s->timer_reload internally again. - */ - ptimer_transaction_commit(s->timer_reload); - imx_epit_reload_compare_timer(s); - ptimer_transaction_commit(s->timer_cmp); + case 2: /* LR */ + imx_epit_write_lr(s, (uint32_t)value); break; case 3: /* CMP */ - s->cmp = value; - - ptimer_transaction_begin(s->timer_cmp); - imx_epit_reload_compare_timer(s); - ptimer_transaction_commit(s->timer_cmp); - + imx_epit_write_cmp(s, (uint32_t)value); break; default: qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset); - break; } } + static void imx_epit_cmp(void *opaque) { IMXEPITState *s = IMX_EPIT(opaque); -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> The CNT register is a read-only register. There is no need to store it's value, it can be calculated on demand. The calculated frequency is needed temporarily only. Note that this is a migration compatibility break for all boards types that use the EPIT peripheral. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 2 - hw/timer/imx_epit.c | 73 ++++++++++++++----------------------- 2 files changed, 28 insertions(+), 47 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ struct IMXEPITState { uint32_t sr; uint32_t lr; uint32_t cmp; - uint32_t cnt; - uint32_t freq; qemu_irq irq; }; diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_update_int(IMXEPITState *s) } } -/* - * Must be called from within a ptimer_transaction_begin/commit block - * for both s->timer_cmp and s->timer_reload. - */ -static void imx_epit_set_freq(IMXEPITState *s) +static uint32_t imx_epit_get_freq(IMXEPITState *s) { - uint32_t clksrc; - uint32_t prescaler; - - clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); - prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); - - s->freq = imx_ccm_get_clock_frequency(s->ccm, - imx_epit_clocks[clksrc]) / prescaler; - - DPRINTF("Setting ptimer frequency to %u\n", s->freq); - - if (s->freq) { - ptimer_set_freq(s->timer_reload, s->freq); - ptimer_set_freq(s->timer_cmp, s->freq); - } + uint32_t clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); + uint32_t prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); + uint32_t f_in = imx_ccm_get_clock_frequency(s->ccm, imx_epit_clocks[clksrc]); + uint32_t freq = f_in / prescaler; + DPRINTF("ptimer frequency is %u\n", freq); + return freq; } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_reset(IMXEPITState *s, bool is_hard_reset) s->sr = 0; s->lr = EPIT_TIMER_MAX; s->cmp = 0; - s->cnt = 0; ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); - /* stop both timers */ + + /* + * The reset switches off the input clock, so even if the CR.EN is still + * set, the timers are no longer running. + */ + assert(imx_epit_get_freq(s) == 0); ptimer_stop(s->timer_cmp); ptimer_stop(s->timer_reload); - /* compute new frequency */ - imx_epit_set_freq(s); /* init both timers to EPIT_TIMER_MAX */ ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - if (s->freq && (s->cr & CR_EN)) { - /* if the timer is still enabled, restart it */ - ptimer_run(s->timer_reload, 0); - } ptimer_transaction_commit(s->timer_cmp); ptimer_transaction_commit(s->timer_reload); } -static uint32_t imx_epit_update_count(IMXEPITState *s) -{ - s->cnt = ptimer_get_count(s->timer_reload); - - return s->cnt; -} - static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) { IMXEPITState *s = IMX_EPIT(opaque); @@ -XXX,XX +XXX,XX @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) break; case 4: /* CNT */ - imx_epit_update_count(s); - reg_value = s->cnt; + reg_value = ptimer_get_count(s->timer_reload); break; default: @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) { if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { /* if the compare feature is on and timers are running */ - uint32_t tmp = imx_epit_update_count(s); + uint32_t tmp = ptimer_get_count(s->timer_reload); uint64_t next; if (tmp > s->cmp) { /* It'll fire in this round of the timer */ @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) { + uint32_t freq = 0; uint32_t oldcr = s->cr; s->cr = value & 0x03ffffff; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); - /* Update the frequency. Has been done already in case of a reset. */ + /* + * Update the frequency. In case of a reset the input clock was + * switched off, so this can be skipped. + */ if (!(s->cr & CR_SWR)) { - imx_epit_set_freq(s); + freq = imx_epit_get_freq(s); + if (freq) { + ptimer_set_freq(s->timer_reload, freq); + ptimer_set_freq(s->timer_cmp, freq); + } } - if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { + if (freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { if (s->cr & CR_ENMOD) { if (s->cr & CR_RLD) { ptimer_set_limit(s->timer_reload, s->lr, 1); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps imx_epit_ops = { static const VMStateDescription vmstate_imx_timer_epit = { .name = TYPE_IMX_EPIT, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (VMStateField[]) { VMSTATE_UINT32(cr, IMXEPITState), VMSTATE_UINT32(sr, IMXEPITState), VMSTATE_UINT32(lr, IMXEPITState), VMSTATE_UINT32(cmp, IMXEPITState), - VMSTATE_UINT32(cnt, IMXEPITState), - VMSTATE_UINT32(freq, IMXEPITState), VMSTATE_PTIMER(timer_reload, IMXEPITState), VMSTATE_PTIMER(timer_cmp, IMXEPITState), VMSTATE_END_OF_LIST() -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> - fix #1263 for CR writes - rework compare time handling - The compare timer has to run even if CR.OCIEN is not set, as SR.OCIF must be updated. - The compare timer fires exactly once when the compare value is less than the current value, but the reload values is less than the compare value. - The compare timer will never fire if the reload value is less than the compare value. Disable it in this case. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> [PMM: fixed minor style nits] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 192 ++++++++++++++++++++++++++------------------ 1 file changed, 116 insertions(+), 76 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Axel Heider * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) return reg_value; } -/* Must be called from ptimer_transaction_begin/commit block for s->timer_cmp */ -static void imx_epit_reload_compare_timer(IMXEPITState *s) +/* + * Must be called from a ptimer_transaction_begin/commit block for + * s->timer_cmp, but outside of a transaction block of s->timer_reload, + * so the proper counter value is read. + */ +static void imx_epit_update_compare_timer(IMXEPITState *s) { - if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { - /* if the compare feature is on and timers are running */ - uint32_t tmp = ptimer_get_count(s->timer_reload); - uint64_t next; - if (tmp > s->cmp) { - /* It'll fire in this round of the timer */ - next = tmp - s->cmp; - } else { /* catch it next time around */ - next = tmp - s->cmp + ((s->cr & CR_RLD) ? EPIT_TIMER_MAX : s->lr); + uint64_t counter = 0; + bool is_oneshot = false; + /* + * The compare timer only has to run if the timer peripheral is active + * and there is an input clock, Otherwise it can be switched off. + */ + bool is_active = (s->cr & CR_EN) && imx_epit_get_freq(s); + if (is_active) { + /* + * Calculate next timeout for compare timer. Reading the reload + * counter returns proper results only if pending transactions + * on it are committed here. Otherwise stale values are be read. + */ + counter = ptimer_get_count(s->timer_reload); + uint64_t limit = ptimer_get_limit(s->timer_cmp); + /* + * The compare timer is a periodic timer if the limit is at least + * the compare value. Otherwise it may fire at most once in the + * current round. + */ + bool is_oneshot = (limit >= s->cmp); + if (counter >= s->cmp) { + /* The compare timer fires in the current round. */ + counter -= s->cmp; + } else if (!is_oneshot) { + /* + * The compare timer fires after a reload, as it is below the + * compare value already in this round. Note that the counter + * value calculated below can be above the 32-bit limit, which + * is legal here because the compare timer is an internal + * helper ptimer only. + */ + counter += limit - s->cmp; + } else { + /* + * The compare timer won't fire in this round, and the limit is + * set to a value below the compare value. This practically means + * it will never fire, so it can be switched off. + */ + is_active = false; } - ptimer_set_count(s->timer_cmp, next); } + + /* + * Set the compare timer and let it run, or stop it. This is agnostic + * of CR.OCIEN bit, as this bit affects interrupt generation only. The + * compare timer needs to run even if no interrupts are to be generated, + * because the SR.OCIF bit must be updated also. + * Note that the timer might already be stopped or be running with + * counter values. However, finding out when an update is needed and + * when not is not trivial. It's much easier applying the setting again, + * as this does not harm either and the overhead is negligible. + */ + if (is_active) { + ptimer_set_count(s->timer_cmp, counter); + ptimer_run(s->timer_cmp, is_oneshot ? 1 : 0); + } else { + ptimer_stop(s->timer_cmp); + } + } static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) { - uint32_t freq = 0; uint32_t oldcr = s->cr; s->cr = value & 0x03ffffff; if (s->cr & CR_SWR) { - /* handle the reset */ + /* + * Reset clears CR.SWR again. It does not touch CR.EN, but the timers + * are still stopped because the input clock is disabled. + */ imx_epit_reset(s, false); + } else { + uint32_t freq; + uint32_t toggled_cr_bits = oldcr ^ s->cr; + /* re-initialize the limits if CR.RLD has changed */ + bool set_limit = toggled_cr_bits & CR_RLD; + /* set the counter if the timer got just enabled and CR.ENMOD is set */ + bool is_switched_on = (toggled_cr_bits & s->cr) & CR_EN; + bool set_counter = is_switched_on && (s->cr & CR_ENMOD); + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + freq = imx_epit_get_freq(s); + if (freq) { + ptimer_set_freq(s->timer_reload, freq); + ptimer_set_freq(s->timer_cmp, freq); + } + + if (set_limit || set_counter) { + uint64_t limit = (s->cr & CR_RLD) ? s->lr : EPIT_TIMER_MAX; + ptimer_set_limit(s->timer_reload, limit, set_counter ? 1 : 0); + if (set_limit) { + ptimer_set_limit(s->timer_cmp, limit, 0); + } + } + /* + * If there is an input clock and the peripheral is enabled, then + * ensure the wall clock timer is ticking. Otherwise stop the timers. + * The compare timer will be updated later. + */ + if (freq && (s->cr & CR_EN)) { + ptimer_run(s->timer_reload, 0); + } else { + ptimer_stop(s->timer_reload); + } + /* Commit changes to reload timer, so they can propagate. */ + ptimer_transaction_commit(s->timer_reload); + /* Update compare timer based on the committed reload timer value. */ + imx_epit_update_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) * - write to CR.EN or CR.OCIE */ imx_epit_update_int(s); - - /* - * TODO: could we 'break' here for reset? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - - /* - * Update the frequency. In case of a reset the input clock was - * switched off, so this can be skipped. - */ - if (!(s->cr & CR_SWR)) { - freq = imx_epit_get_freq(s); - if (freq) { - ptimer_set_freq(s->timer_reload, freq); - ptimer_set_freq(s->timer_cmp, freq); - } - } - - if (freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { - if (s->cr & CR_ENMOD) { - if (s->cr & CR_RLD) { - ptimer_set_limit(s->timer_reload, s->lr, 1); - ptimer_set_limit(s->timer_cmp, s->lr, 1); - } else { - ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); - } - } - - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_reload, 0); - if (s->cr & CR_OCIEN) { - ptimer_run(s->timer_cmp, 0); - } else { - ptimer_stop(s->timer_cmp); - } - } else if (!(s->cr & CR_EN)) { - /* stop both timers */ - ptimer_stop(s->timer_reload); - ptimer_stop(s->timer_cmp); - } else if (s->cr & CR_OCIEN) { - if (!(oldcr & CR_OCIEN)) { - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_cmp, 0); - } - } else { - ptimer_stop(s->timer_cmp); - } - - ptimer_transaction_commit(s->timer_cmp); - ptimer_transaction_commit(s->timer_reload); } static void imx_epit_write_sr(IMXEPITState *s, uint32_t value) @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_lr(IMXEPITState *s, uint32_t value) /* If IOVW bit is set then set the timer value */ ptimer_set_count(s->timer_reload, s->lr); } - /* - * Commit the change to s->timer_reload, so it can propagate. Otherwise - * the timer interrupt may not fire properly. The commit must happen - * before calling imx_epit_reload_compare_timer(), which reads - * s->timer_reload internally again. - */ + /* Commit the changes to s->timer_reload, so they can propagate. */ ptimer_transaction_commit(s->timer_reload); - imx_epit_reload_compare_timer(s); + /* Update the compare timer based on the committed reload timer value. */ + imx_epit_update_compare_timer(s); ptimer_transaction_commit(s->timer_cmp); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cmp(IMXEPITState *s, uint32_t value) { s->cmp = value; + /* Update the compare timer based on the committed reload timer value. */ ptimer_transaction_begin(s->timer_cmp); - imx_epit_reload_compare_timer(s); + imx_epit_update_compare_timer(s); ptimer_transaction_commit(s->timer_cmp); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_cmp(void *opaque) { IMXEPITState *s = IMX_EPIT(opaque); + /* The cmp ptimer can't be running when the peripheral is disabled */ + assert(s->cr & CR_EN); + DPRINTF("sr was %d\n", s->sr); /* Set interrupt status bit SR.OCIF and update the interrupt state */ s->sr |= SR_OCIF; -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix these: WARNING: Block comments use a leading /* on a separate line WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-2-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 323 +++++++++++++++++++++++++++++--------------- 1 file changed, 215 insertions(+), 108 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri) static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t v) { - /* Raw write of a coprocessor register (as needed for migration, etc). + /* + * Raw write of a coprocessor register (as needed for migration, etc). * Note that constant registers are treated as write-ignored; the * caller should check for success by whether a readback gives the * value written. @@ -XXX,XX +XXX,XX @@ static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri, static bool raw_accessors_invalid(const ARMCPRegInfo *ri) { - /* Return true if the regdef would cause an assertion if you called + /* + * Return true if the regdef would cause an assertion if you called * read_raw_cp_reg() or write_raw_cp_reg() on it (ie if it is a * program bug for it not to have the NO_RAW flag). * NB that returning false here doesn't necessarily mean that calling @@ -XXX,XX +XXX,XX @@ bool write_list_to_cpustate(ARMCPU *cpu) if (ri->type & ARM_CP_NO_RAW) { continue; } - /* Write value and confirm it reads back as written + /* + * Write value and confirm it reads back as written * (to catch read-only registers and partially read-only * registers where the incoming migration value doesn't match) */ @@ -XXX,XX +XXX,XX @@ static gint cpreg_key_compare(gconstpointer a, gconstpointer b) void init_cpreg_list(ARMCPU *cpu) { - /* Initialise the cpreg_tuples[] array based on the cp_regs hash. + /* + * Initialise the cpreg_tuples[] array based on the cp_regs hash. * Note that we require cpreg_tuples[] to be sorted by key ID. */ GList *keys; @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_el3_aa32ns(CPUARMState *env, return CP_ACCESS_OK; } -/* Some secure-only AArch32 registers trap to EL3 if used from +/* + * Some secure-only AArch32 registers trap to EL3 if used from * Secure EL1 (but are just ordinary UNDEF in other non-EL3 contexts). * Note that an access from Secure EL1 can only happen if EL3 is AArch64. * We assume that the .access field is set to PL1_RW. @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_trap_aa32s_el1(CPUARMState *env, return CP_ACCESS_TRAP_UNCATEGORIZED; } -/* Check for traps to performance monitor registers, which are controlled +/* + * Check for traps to performance monitor registers, which are controlled * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3. */ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) ARMCPU *cpu = env_archcpu(env); if (raw_read(env, ri) != value) { - /* Unlike real hardware the qemu TLB uses virtual addresses, + /* + * Unlike real hardware the qemu TLB uses virtual addresses, * not modified virtual addresses, so this causes a TLB flush. */ tlb_flush(CPU(cpu)); @@ -XXX,XX +XXX,XX @@ static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri, if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA) && !extended_addresses_enabled(env)) { - /* For VMSA (when not using the LPAE long descriptor page table + /* + * For VMSA (when not using the LPAE long descriptor page table * format) this register includes the ASID, so do a TLB flush. * For PMSA it is purely a process ID and no action is needed. */ @@ -XXX,XX +XXX,XX @@ static void tlbiipas2is_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, } static const ARMCPRegInfo cp_reginfo[] = { - /* Define the secure and non-secure FCSE identifier CP registers + /* + * Define the secure and non-secure FCSE identifier CP registers * separately because there is no secure bank in V8 (no _EL3). This allows * the secure register to be properly reset and migrated. There is also no * v8 EL1 version of the register so the non-secure instance stands alone. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, .fieldoffset = offsetof(CPUARMState, cp15.fcseidr_s), .resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, }, - /* Define the secure and non-secure context identifier CP registers + /* + * Define the secure and non-secure context identifier CP registers * separately because there is no secure bank in V8 (no _EL3). This allows * the secure register to be properly reset and migrated. In the * non-secure case, the 32-bit register will have reset and migration @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { }; static const ARMCPRegInfo not_v8_cp_reginfo[] = { - /* NB: Some of these registers exist in v8 but with more precise + /* + * NB: Some of these registers exist in v8 but with more precise * definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]). */ /* MMU Domain access control / MPU write buffer control */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, - /* ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs. + /* + * ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs. * For v6 and v5, these mappings are overly broad. */ { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { }; static const ARMCPRegInfo not_v6_cp_reginfo[] = { - /* Not all pre-v6 cores implemented this WFI, so this is slightly + /* + * Not all pre-v6 cores implemented this WFI, so this is slightly * over-broad. */ { .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v6_cp_reginfo[] = { }; static const ARMCPRegInfo not_v7_cp_reginfo[] = { - /* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which + /* + * Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which * is UNPREDICTABLE; we choose to NOP as most implementations do). */ { .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, .access = PL1_W, .type = ARM_CP_WFI }, - /* L1 cache lockdown. Not architectural in v6 and earlier but in practice + /* + * L1 cache lockdown. Not architectural in v6 and earlier but in practice * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and * OMAPCP will override this space. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = { { .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY, .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, .resetvalue = 0 }, - /* We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR; + /* + * We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR; * implementing it as RAZ means the "debug architecture version" bits * will read as a reserved value, which should cause Linux to not try * to use the debug hardware. */ { .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* MMU TLB control. Note that the wildcarding means we cover not just + /* + * MMU TLB control. Note that the wildcarding means we cover not just * the unified TLB ops but also the dside/iside/inner-shareable variants. */ { .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY, @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* In ARMv8 most bits of CPACR_EL1 are RES0. */ if (!arm_feature(env, ARM_FEATURE_V8)) { - /* ARMv7 defines bits for unimplemented coprocessors as RAZ/WI. + /* + * ARMv7 defines bits for unimplemented coprocessors as RAZ/WI. * ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP. * TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell. */ @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, value |= R_CPACR_ASEDIS_MASK; } - /* VFPv3 and upwards with NEON implement 32 double precision + /* + * VFPv3 and upwards with NEON implement 32 double precision * registers (D0-D31). */ if (!cpu_isar_feature(aa32_simd_r32, env_archcpu(env))) { @@ -XXX,XX +XXX,XX @@ static uint64_t cpacr_read(CPUARMState *env, const ARMCPRegInfo *ri) static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri) { - /* Call cpacr_write() so that we reset with the correct RAO bits set + /* + * Call cpacr_write() so that we reset with the correct RAO bits set * for our CPU features. */ cpacr_write(env, ri, 0); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "MVA_prefetch", .cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NOP }, - /* We need to break the TB after ISB to execute self-modifying code + /* + * We need to break the TB after ISB to execute self-modifying code * correctly and also to take any pending interrupts immediately. * So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), offsetof(CPUARMState, cp15.ifar_ns) }, .resetvalue = 0, }, - /* Watchpoint Fault Address Register : should actually only be present + /* + * Watchpoint Fault Address Register : should actually only be present * for 1136, 1176, 11MPCore. */ { .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static bool event_supported(uint16_t number) static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* Performance monitor registers user accessibility is controlled + /* + * Performance monitor registers user accessibility is controlled * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable * trapping to EL2 or EL3 for other accesses. */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult pmreg_access_ccntr(CPUARMState *env, (MDCR_HPME | MDCR_HPMD | MDCR_HPMN | MDCR_HCCD | MDCR_HLP) #define MDCR_EL3_PMU_ENABLE_BITS (MDCR_SPME | MDCR_SCCD) -/* Returns true if the counter (pass 31 for PMCCNTR) should count events using +/* + * Returns true if the counter (pass 31 for PMCCNTR) should count events using * the current EL, security state, and register configuration. */ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) @@ -XXX,XX +XXX,XX @@ static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri) static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and + /* + * The value of PMSELR.SEL affects the behavior of PMXEVTYPER and * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are * accessed. @@ -XXX,XX +XXX,XX @@ static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.c14_pmevtyper[counter] = value & PMXEVTYPER_MASK; pmevcntr_op_finish(env, counter); } - /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when + /* + * Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when * PMSELR value is equal to or greater than the number of implemented * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pmevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri, } return ret; } else { - /* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR - * are CONSTRAINED UNPREDICTABLE. */ + /* + * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR + * are CONSTRAINED UNPREDICTABLE. + */ return 0; } } @@ -XXX,XX +XXX,XX @@ static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Note that even though the AArch64 view of this register has bits + /* + * Note that even though the AArch64 view of this register has bits * [10:0] all RES0 we can only mask the bottom 5, to comply with the * architectural requirements for bits which are RES0 only in some * contexts. (ARMv8 would permit us to do no masking at all, but ARMv7 @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (!arm_feature(env, ARM_FEATURE_EL2)) { valid_mask &= ~SCR_HCE; - /* On ARMv7, SMD (or SCD as it is called in v7) is only + /* + * On ARMv7, SMD (or SCD as it is called in v7) is only * supported if EL2 exists. The bit is UNK/SBZP when * EL2 is unavailable. In QEMU ARMv7, we force it to always zero * when EL2 is unavailable. @@ -XXX,XX +XXX,XX @@ static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); - /* Acquire the CSSELR index from the bank corresponding to the CCSIDR + /* + * Acquire the CSSELR index from the bank corresponding to the CCSIDR * bank */ uint32_t index = A32_BANKED_REG_GET(env, csselr, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */ { .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, .access = PL1_W, .type = ARM_CP_NOP }, - /* Performance monitors are implementation defined in v7, + /* + * Performance monitors are implementation defined in v7, * but with an ARM recommended set of registers, which we * follow. * @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .writefn = csselr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s), offsetof(CPUARMState, cp15.csselr_ns) } }, - /* Auxiliary ID register: this actually has an IMPDEF value but for now + /* + * Auxiliary ID register: this actually has an IMPDEF value but for now * just RAZ for all cores: */ { .name = "AIDR", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid1, .resetvalue = 0 }, - /* Auxiliary fault status registers: these also are IMPDEF, and we + /* + * Auxiliary fault status registers: these also are IMPDEF, and we * choose to RAZ/WI for all cores. */ { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* MAIR can just read-as-written because we don't implement caches + /* + * MAIR can just read-as-written because we don't implement caches * and so don't need to care about memory attributes. */ { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[3]), .resetvalue = 0 }, - /* For non-long-descriptor page tables these are PRRR and NMRR; + /* + * For non-long-descriptor page tables these are PRRR and NMRR; * regardless they still act as reads-as-written for QEMU. */ - /* MAIR0/1 are defined separately from their 64-bit counterpart which + /* + * MAIR0/1 are defined separately from their 64-bit counterpart which * allows them to assign the correct fieldoffset based on the endianness * handled in the field definitions. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero. + /* + * CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero. * Writable only at the highest implemented exception level. */ int el = arm_current_el(env); @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* The AArch64 register view of the secure physical timer is + /* + * The AArch64 register view of the secure physical timer is * always accessible from EL3, and configurably accessible from * Secure EL1. */ @@ -XXX,XX +XXX,XX @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx) ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; if (gt->ctl & 1) { - /* Timer enabled: calculate and set current ISTATUS, irq, and + /* + * Timer enabled: calculate and set current ISTATUS, irq, and * reset timer to when ISTATUS next has to change */ uint64_t offset = timeridx == GTIMER_VIRT ? @@ -XXX,XX +XXX,XX @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx) /* Next transition is when we hit cval */ nexttick = gt->cval + offset; } - /* Note that the desired next expiry time might be beyond the + /* + * Note that the desired next expiry time might be beyond the * signed-64-bit range of a QEMUTimer -- in this case we just * set the timer for as far in the future as possible. When the * timer expires we will reset the timer for any remaining period. @@ -XXX,XX +XXX,XX @@ static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Enable toggled */ gt_recalc_timer(cpu, timeridx); } else if ((oldval ^ value) & 2) { - /* IMASK toggled: don't need to recalculate, + /* + * IMASK toggled: don't need to recalculate, * just set the interrupt line based on ISTATUS */ int irqstate = (oldval & 4) && !(value & 2); @@ -XXX,XX +XXX,XX @@ static void arm_gt_cntfrq_reset(CPUARMState *env, const ARMCPRegInfo *opaque) } static const ARMCPRegInfo generic_timer_cp_reginfo[] = { - /* Note that CNTFRQ is purely reads-as-written for the benefit + /* + * Note that CNTFRQ is purely reads-as-written for the benefit * of software; writing it doesn't actually change the timer frequency. * Our reset value matches the fixed frequency we implement the timer at. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = { .readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read, .writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write, }, - /* Secure timer -- this is actually restricted to only EL3 + /* + * Secure timer -- this is actually restricted to only EL3 * and configurably Secure-EL1 via the accessfn. */ { .name = "CNTPS_TVAL_EL1", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, #else -/* In user-mode most of the generic timer registers are inaccessible +/* + * In user-mode most of the generic timer registers are inaccessible * however modern kernels (4.12+) allow access to cntvct_el0 */ @@ -XXX,XX +XXX,XX @@ static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); - /* Currently we have no support for QEMUTimer in linux-user so we + /* + * Currently we have no support for QEMUTimer in linux-user so we * can't call gt_get_countervalue(env), instead we directly * call the lower level functions. */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (ri->opc2 & 4) { - /* The ATS12NSO* operations must trap to EL3 or EL2 if executed in + /* + * The ATS12NSO* operations must trap to EL3 or EL2 if executed in * Secure EL1 (which can only happen if EL3 is AArch64). * They are simply UNDEF if executed from NS EL1. * They function normally from EL2 or EL3. @@ -XXX,XX +XXX,XX @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value, } } } else { - /* fsr is a DFSR/IFSR value for the short descriptor + /* + * fsr is a DFSR/IFSR value for the short descriptor * translation table format (with WnR always clear). * Convert it to a 32-bit PAR. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmsav8r_cp_reginfo[] = { }; static const ARMCPRegInfo pmsav7_cp_reginfo[] = { - /* Reset for all these registers is handled in arm_cpu_reset(), + /* + * Reset for all these registers is handled in arm_cpu_reset(), * because the PMSAv7 is also used by M-profile CPUs, which do * not register cpregs but still need the state to be reset. */ @@ -XXX,XX +XXX,XX @@ static void vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri, } if (arm_feature(env, ARM_FEATURE_LPAE)) { - /* With LPAE the TTBCR could result in a change of ASID + /* + * With LPAE the TTBCR could result in a change of ASID * via the TTBCR.A1 bit, so do a TLB flush. */ tlb_flush(CPU(cpu)); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, }; -/* Note that unlike TTBCR, writing to TTBCR2 does not require flushing +/* + * Note that unlike TTBCR, writing to TTBCR2 does not require flushing * qemu tlbs nor adjusting cached masks. */ static const ARMCPRegInfo ttbcr2_reginfo = { @@ -XXX,XX +XXX,XX @@ static void omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri, static void omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* On OMAP there are registers indicating the max/min index of dcache lines + /* + * On OMAP there are registers indicating the max/min index of dcache lines * containing a dirty line; cache flush operations have to reset these. */ env->cp15.c15_i_max = 0x000; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo omap_cp_reginfo[] = { .crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_NO_RAW, .readfn = arm_cp_read_zero, .writefn = omap_wfi_write, }, - /* TODO: Peripheral port remap register: + /* + * TODO: Peripheral port remap register: * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller * base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff), * when MMU is off. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo xscale_cp_reginfo[] = { .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr), .resetvalue = 0, }, - /* XScale specific cache-lockdown: since we have no cache we NOP these + /* + * XScale specific cache-lockdown: since we have no cache we NOP these * and hope the guest does not really rely on cache behaviour. */ { .name = "XSCALE_LOCK_ICACHE_LINE", @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo xscale_cp_reginfo[] = { }; static const ARMCPRegInfo dummy_c15_cp_reginfo[] = { - /* RAZ/WI the whole crn=15 space, when we don't have a more specific + /* + * RAZ/WI the whole crn=15 space, when we don't have a more specific * implementation of this implementation-defined space. * Ideally this should eventually disappear in favour of actually * implementing the correct behaviour for all cores. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { }; static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { - /* The cache test-and-clean instructions always return (1 << 30) + /* + * The cache test-and-clean instructions always return (1 << 30) * to indicate that there are no dirty cache lines. */ { .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3, @@ -XXX,XX +XXX,XX @@ static uint64_t mpidr_read_val(CPUARMState *env) if (arm_feature(env, ARM_FEATURE_V7MP)) { mpidr |= (1U << 31); - /* Cores which are uniprocessor (non-coherent) + /* + * Cores which are uniprocessor (non-coherent) * but still implement the MP extensions set * bit 30. (For instance, Cortex-R5). */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tocu(CPUARMState *env, const ARMCPRegInfo *ri, return do_cacheop_pou_access(env, HCR_TOCU | HCR_TPU); } -/* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions +/* + * See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL2 + /* + * Invalidate by VA, EL2 * Currently handles both VAE2 and VALE2, since we don't support * flush-last-level-only. */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL3 + /* + * Invalidate by VA, EL3 * Currently handles both VAE3 and VALE3, since we don't support * flush-last-level-only. */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL1&0 (AArch64 version). + /* + * Invalidate by VA, EL1&0 (AArch64 version). * Currently handles all of VAE1, VAAE1, VAALE1 and VALE1, * since we don't support flush-for-specific-ASID-only or * flush-last-level-only. @@ -XXX,XX +XXX,XX @@ static CPAccessResult sp_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (!(env->pstate & PSTATE_SP)) { - /* Access to SP_EL0 is undefined if it's being used as + /* + * Access to SP_EL0 is undefined if it's being used as * the stack pointer. */ return CP_ACCESS_TRAP_UNCATEGORIZED; @@ -XXX,XX +XXX,XX @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, } if (raw_read(env, ri) == value) { - /* Skip the TLB flush if nothing actually changed; Linux likes + /* + * Skip the TLB flush if nothing actually changed; Linux likes * to do a lot of pointless SCTLR writes. */ return; @@ -XXX,XX +XXX,XX @@ static void mdcr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, } static const ARMCPRegInfo v8_cp_reginfo[] = { - /* Minimal set of EL0-visible registers. This will need to be expanded + /* + * Minimal set of EL0-visible registers. This will need to be expanded * significantly for system emulation of AArch64 CPUs. */ { .name = "NZCV", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 0, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_SVC]) }, - /* We rely on the access checks not allowing the guest to write to the + /* + * We rely on the access checks not allowing the guest to write to the * state field when SPSel indicates that it's being used as the stack * pointer. */ @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (arm_feature(env, ARM_FEATURE_EL3)) { valid_mask &= ~HCR_HCD; } else if (cpu->psci_conduit != QEMU_PSCI_CONDUIT_SMC) { - /* Architecturally HCR.TSC is RES0 if EL3 is not implemented. + /* + * Architecturally HCR.TSC is RES0 if EL3 is not implemented. * However, if we're using the SMC PSCI conduit then QEMU is * effectively acting like EL3 firmware and so the guest at * EL2 should retain the ability to prevent EL1 from being @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, #ifndef CONFIG_USER_ONLY - /* Unlike the other EL2-related AT operations, these must + /* + * Unlike the other EL2-related AT operations, these must * UNDEF from EL3 if EL2 is not implemented, which is why we * define them here rather than with the rest of the AT ops. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .access = PL2_W, .accessfn = at_s1e2_access, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = ats_write64 }, - /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE + /* + * The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose * to behave as if SCR.NS was 1. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, - /* ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the + /* + * ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the * reset values as IMPDEF. We choose to reset to 3 to comply with * both ARMv7 and ARMv8. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_sec_cp_reginfo[] = { static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. + /* + * The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. * At Secure EL1 it traps to EL3 or EL2. */ if (arm_current_el(env) == 3) { @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } -/* We don't know until after realize whether there's a GICv3 +/* + * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. * So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1 * at runtime. @@ -XXX,XX +XXX,XX @@ static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) } #endif -/* Shared logic between LORID and the rest of the LOR* registers. +/* + * Shared logic between LORID and the rest of the LOR* registers. * Secure state exclusion has already been dealt with. */ static CPAccessResult access_lor_ns(CPUARMState *env, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, cp_reginfo); if (!arm_feature(env, ARM_FEATURE_V8)) { - /* Must go early as it is full of wildcards that may be + /* + * Must go early as it is full of wildcards that may be * overridden by later definitions. */ define_arm_cp_regs(cpu, not_v8_cp_reginfo); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa32_tid3, .resetvalue = cpu->isar.id_pfr0 }, - /* ID_PFR1 is not a plain ARM_CP_CONST because we don't know + /* + * ID_PFR1 is not a plain ARM_CP_CONST because we don't know * the value of the GIC field until after we define these regs. */ { .name = "ID_PFR1", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, el3_regs); } - /* The behaviour of NSACR is sufficiently various that we don't + /* + * The behaviour of NSACR is sufficiently various that we don't * try to describe it in a single reginfo: * if EL3 is 64 bit, then trap to EL3 from S EL1, * reads as constant 0xc00 from NS EL1 and NS EL2 @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa32_jazelle, cpu)) { define_arm_cp_regs(cpu, jazelle_regs); } - /* Slightly awkwardly, the OMAP and StrongARM cores need all of + /* + * Slightly awkwardly, the OMAP and StrongARM cores need all of * cp15 crn=0 to be writes-ignored, whereas for other cores they should * be read-only (ie write causes UNDEF exception). */ { ARMCPRegInfo id_pre_v8_midr_cp_reginfo[] = { - /* Pre-v8 MIDR space. + /* + * Pre-v8 MIDR space. * Note that the MIDR isn't a simple constant register because * of the TI925 behaviour where writes to another register can * cause the MIDR value to change. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (arm_feature(env, ARM_FEATURE_OMAPCP) || arm_feature(env, ARM_FEATURE_STRONGARM)) { size_t i; - /* Register the blanket "writes ignored" value first to cover the + /* + * Register the blanket "writes ignored" value first to cover the * whole space. Then update the specific ID registers to allow write * access, so that they ignore writes rather than causing them to * UNDEF. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .raw_writefn = raw_write, }; if (arm_feature(env, ARM_FEATURE_XSCALE)) { - /* Normally we would always end the TB on an SCTLR write, but Linux + /* + * Normally we would always end the TB on an SCTLR write, but Linux * arch/arm/mach-pxa/sleep.S expects two instructions following * an MMU enable to execute from cache. Imitate this behaviour. */ @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, const ARMCPRegInfo *r, void *opaque) { - /* Define implementations of coprocessor registers. + /* + * Define implementations of coprocessor registers. * We store these in a hashtable because typically * there are less than 150 registers in a space which * is 16*16*16*8*8 = 262144 in size. @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, default: g_assert_not_reached(); } - /* The AArch64 pseudocode CheckSystemAccess() specifies that op1 + /* + * The AArch64 pseudocode CheckSystemAccess() specifies that op1 * encodes a minimum access level for the register. We roll this * runtime check into our general permission check code, so check * here that the reginfo's specified permissions are strict enough @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, assert((r->access & ~mask) == 0); } - /* Check that the register definition has enough info to handle + /* + * Check that the register definition has enough info to handle * reads and writes if they are permitted. */ if (!(r->type & (ARM_CP_SPECIAL_MASK | ARM_CP_CONST))) { @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, continue; } if (state == ARM_CP_STATE_AA32) { - /* Under AArch32 CP registers can be common + /* + * Under AArch32 CP registers can be common * (same for secure and non-secure world) or banked. */ char *name; @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, g_assert_not_reached(); } } else { - /* AArch64 registers get mapped to non-secure instance - * of AArch32 */ + /* + * AArch64 registers get mapped to non-secure instance + * of AArch32 + */ add_cpreg_to_hashtable(cpu, r, opaque, state, ARM_CP_SECSTATE_NS, crm, opc1, opc2, r->name); @@ -XXX,XX +XXX,XX @@ void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque) static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) { - /* Return true if it is not valid for us to switch to + /* + * Return true if it is not valid for us to switch to * this CPU mode (ie all the UNPREDICTABLE cases in * the ARM ARM CPSRWriteByInstr pseudocode). */ @@ -XXX,XX +XXX,XX @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) case ARM_CPU_MODE_UND: case ARM_CPU_MODE_IRQ: case ARM_CPU_MODE_FIQ: - /* Note that we don't implement the IMPDEF NSACR.RFR which in v7 + /* + * Note that we don't implement the IMPDEF NSACR.RFR which in v7 * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.) */ - /* If HCR.TGE is set then changes from Monitor to NS PL1 via MSR + /* + * If HCR.TGE is set then changes from Monitor to NS PL1 via MSR * and CPS are treated as illegal mode changes. */ if (write_type == CPSRWriteByInstr && @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, env->GE = (val >> 16) & 0xf; } - /* In a V7 implementation that includes the security extensions but does + /* + * In a V7 implementation that includes the security extensions but does * not include Virtualization Extensions the SCR.FW and SCR.AW bits control * whether non-secure software is allowed to change the CPSR_F and CPSR_A * bits respectively. @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, changed_daif = (env->daif ^ val) & mask; if (changed_daif & CPSR_A) { - /* Check to see if we are allowed to change the masking of async + /* + * Check to see if we are allowed to change the masking of async * abort exceptions from a non-secure state. */ if (!(env->cp15.scr_el3 & SCR_AW)) { @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, } if (changed_daif & CPSR_F) { - /* Check to see if we are allowed to change the masking of FIQ + /* + * Check to see if we are allowed to change the masking of FIQ * exceptions from a non-secure state. */ if (!(env->cp15.scr_el3 & SCR_FW)) { @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, mask &= ~CPSR_F; } - /* Check whether non-maskable FIQ (NMFI) support is enabled. + /* + * Check whether non-maskable FIQ (NMFI) support is enabled. * If this bit is set software is not allowed to mask * FIQs, but is allowed to set CPSR_F to 0. */ @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, if (write_type != CPSRWriteRaw && ((env->uncached_cpsr ^ val) & mask & CPSR_M)) { if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR) { - /* Note that we can only get here in USR mode if this is a + /* + * Note that we can only get here in USR mode if this is a * gdb stub write; for this case we follow the architectural * behaviour for guest writes in USR mode of ignoring an attempt * to switch mode. (Those are caught by translate.c for writes @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, */ mask &= ~CPSR_M; } else if (bad_mode_switch(env, val & CPSR_M, write_type)) { - /* Attempt to switch to an invalid mode: this is UNPREDICTABLE in + /* + * Attempt to switch to an invalid mode: this is UNPREDICTABLE in * v7, and has defined behaviour in v8: * + leave CPSR.M untouched * + allow changes to the other CPSR fields @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) env->regs[14] = env->banked_r14[r14_bank_number(mode)]; } -/* Physical Interrupt Target EL Lookup Table +/* + * Physical Interrupt Target EL Lookup Table * * [ From ARM ARM section G1.13.4 (Table G1-15) ] * @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, if (arm_feature(env, ARM_FEATURE_EL3)) { rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW); } else { - /* Either EL2 is the highest EL (and so the EL2 register width + /* + * Either EL2 is the highest EL (and so the EL2 register width * is given by is64); or there is no EL2 or EL3, in which case * the value of 'rw' does not affect the table lookup anyway. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23]; } - /* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ + /* + * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ * mode, then we can copy to r8-r14. Otherwise, we copy to the * FIQ bank for r8-r14. */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) /* High vectors. When enabled, base address cannot be remapped. */ addr += 0xffff0000; } else { - /* ARM v7 architectures provide a vector base address register to remap + /* + * ARM v7 architectures provide a vector base address register to remap * the interrupt vector table. * This register is only followed in non-monitor mode, and is banked. * Note: only bits 31:5 are valid. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); if (cur_el < new_el) { - /* Entry vector offset depends on whether the implemented EL + /* + * Entry vector offset depends on whether the implemented EL * immediately lower than the target level is using AArch32 or AArch64 */ bool is_aa64; @@ -XXX,XX +XXX,XX @@ static void handle_semihosting(CPUState *cs) } #endif -/* Handle a CPU exception for A and R profile CPUs. +/* + * Handle a CPU exception for A and R profile CPUs. * Do any appropriate logging, handle PSCI calls, and then hand off * to the AArch64-entry or AArch32-entry function depending on the * target exception level's register width. @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) } #endif - /* Hooks may change global state so BQL should be held, also the + /* + * Hooks may change global state so BQL should be held, also the * BQL needs to be held for any modification of * cs->interrupt_request. */ @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, }; } -/* Note that signed overflow is undefined in C. The following routines are - careful to use unsigned types where modulo arithmetic is required. - Failure to do so _will_ break on newer gcc. */ +/* + * Note that signed overflow is undefined in C. The following routines are + * careful to use unsigned types where modulo arithmetic is required. + * Failure to do so _will_ break on newer gcc. + */ /* Signed saturating arithmetic. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b) return (a & mask) | (b & ~mask); } -/* CRC helpers. +/* + * CRC helpers. * The upper bytes of val (above the number specified by 'bytes') must have * been zeroed out by the caller. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(crc32c)(uint32_t acc, uint32_t val, uint32_t bytes) return crc32c(acc, buf, bytes) ^ 0xffffffff; } -/* Return the exception level to which FP-disabled exceptions should +/* + * Return the exception level to which FP-disabled exceptions should * be taken, or 0 if FP is enabled. */ int fp_exception_el(CPUARMState *env, int cur_el) @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) #ifndef CONFIG_USER_ONLY uint64_t hcr_el2; - /* CPACR and the CPTR registers don't exist before v6, so FP is + /* + * CPACR and the CPTR registers don't exist before v6, so FP is * always accessible */ if (!arm_feature(env, ARM_FEATURE_V6)) { @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) hcr_el2 = arm_hcr_el2_eff(env); - /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: + /* + * The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses * 3 : trap no accesses -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix the following: ERROR: spaces required around that '|' (ctx:VxV) ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '+' (ctx:VxB) ERROR: space prohibited between function name and open parenthesis '(' (the last two still have some occurrences in macros which I left behind because it might impact readability) Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-3-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_list(gpointer key, gpointer opaque) uint32_t regidx = (uintptr_t)key; const ARMCPRegInfo *ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); - if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { + if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) { cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx); /* The value array need not be initialized at this point */ cpu->cpreg_array_len++; @@ -XXX,XX +XXX,XX @@ static void count_cpreg(gpointer key, gpointer opaque) ri = g_hash_table_lookup(cpu->cp_regs, key); - if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { + if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) { cpu->cpreg_array_len++; } } @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { .resetfn = arm_cp_reset_ignore }, { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0, - .access = PL0_R|PL1_W, + .access = PL0_R | PL1_W, .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]), .resetvalue = 0}, { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3, - .access = PL0_R|PL1_W, + .access = PL0_R | PL1_W, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s), offsetoflow32(CPUARMState, cp15.tpidruro_ns) }, .resetfn = arm_cp_reset_ignore }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { .resetvalue = 0 }, /* The cache ops themselves: these all NOP for QEMU */ { .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, }; static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo cbar = { .name = "CBAR", .cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0, - .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar, + .access = PL1_R | PL3_W, .resetvalue = cpu->reset_cbar, .fieldoffset = offsetof(CPUARMState, cp15.c15_config_base_address) }; @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) return; if (old_mode == ARM_CPU_MODE_FIQ) { - memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); - memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); + memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); + memcpy(env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); } else if (mode == ARM_CPU_MODE_FIQ) { - memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); - memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); + memcpy(env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); + memcpy(env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); } i = bank_number(old_mode); @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if (sum >= 0) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define SARITH8(a, b, n, op) do { \ int32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if (sum >= 0) \ ge |= 1 << n; \ - } while(0) + } while (0) #define ADD16(a, b, n) SARITH16(a, b, n, +) @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if ((sum >> 16) == 1) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define ADD8(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if ((sum >> 8) == 1) \ ge |= 1 << n; \ - } while(0) + } while (0) #define SUB16(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if ((sum >> 16) == 0) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define SUB8(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if ((sum >> 8) == 0) \ ge |= 1 << n; \ - } while(0) + } while (0) #define PFX u #define ARITH_GE -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix this: ERROR: braces {} are necessary for all arms of this statement Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-4-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 67 ++++++++++++++++++++++++++++----------------- 1 file changed, 42 insertions(+), 25 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, env->CF = (val >> 29) & 1; env->VF = (val << 3) & 0x80000000; } - if (mask & CPSR_Q) + if (mask & CPSR_Q) { env->QF = ((val & CPSR_Q) != 0); - if (mask & CPSR_T) + } + if (mask & CPSR_T) { env->thumb = ((val & CPSR_T) != 0); + } if (mask & CPSR_IT_0_1) { env->condexec_bits &= ~3; env->condexec_bits |= (val >> 25) & 3; @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) int i; old_mode = env->uncached_cpsr & CPSR_M; - if (mode == old_mode) + if (mode == old_mode) { return; + } if (old_mode == ARM_CPU_MODE_FIQ) { memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) new_mode = ARM_CPU_MODE_UND; addr = 0x04; mask = CPSR_I; - if (env->thumb) + if (env->thumb) { offset = 2; - else + } else { offset = 4; + } break; case EXCP_SWI: new_mode = ARM_CPU_MODE_SVC; @@ -XXX,XX +XXX,XX @@ static inline uint16_t add16_sat(uint16_t a, uint16_t b) res = a + b; if (((res ^ a) & 0x8000) && !((a ^ b) & 0x8000)) { - if (a & 0x8000) + if (a & 0x8000) { res = 0x8000; - else + } else { res = 0x7fff; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t add8_sat(uint8_t a, uint8_t b) res = a + b; if (((res ^ a) & 0x80) && !((a ^ b) & 0x80)) { - if (a & 0x80) + if (a & 0x80) { res = 0x80; - else + } else { res = 0x7f; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint16_t sub16_sat(uint16_t a, uint16_t b) res = a - b; if (((res ^ a) & 0x8000) && ((a ^ b) & 0x8000)) { - if (a & 0x8000) + if (a & 0x8000) { res = 0x8000; - else + } else { res = 0x7fff; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_sat(uint8_t a, uint8_t b) res = a - b; if (((res ^ a) & 0x80) && ((a ^ b) & 0x80)) { - if (a & 0x80) + if (a & 0x80) { res = 0x80; - else + } else { res = 0x7f; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint16_t add16_usat(uint16_t a, uint16_t b) { uint16_t res; res = a + b; - if (res < a) + if (res < a) { res = 0xffff; + } return res; } static inline uint16_t sub16_usat(uint16_t a, uint16_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return 0; + } } static inline uint8_t add8_usat(uint8_t a, uint8_t b) { uint8_t res; res = a + b; - if (res < a) + if (res < a) { res = 0xff; + } return res; } static inline uint8_t sub8_usat(uint8_t a, uint8_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return 0; + } } #define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16); @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) static inline uint8_t do_usad(uint8_t a, uint8_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return b - a; + } } /* Unsigned sum of absolute byte differences. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b) uint32_t mask; mask = 0; - if (flags & 1) + if (flags & 1) { mask |= 0xff; - if (flags & 2) + } + if (flags & 2) { mask |= 0xff00; - if (flags & 4) + } + if (flags & 4) { mask |= 0xff0000; - if (flags & 8) + } + if (flags & 8) { mask |= 0xff000000; + } return (a & mask) | (b & ~mask); } -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-5-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/units.h" -#include "target/arm/idau.h" -#include "trace.h" #include "cpu.h" #include "internals.h" -#include "exec/gdbstub.h" #include "exec/helper-proto.h" -#include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "qemu/bitops.h" -#include "qemu/crc32c.h" -#include "qemu/qemu-print.h" #include "qemu/log.h" #include "exec/exec-all.h" -#include <zlib.h> /* For crc32 */ -#include "semihosting/semihost.h" -#include "sysemu/cpus.h" -#include "sysemu/kvm.h" -#include "qemu/range.h" -#include "qapi/qapi-commands-machine-target.h" -#include "qapi/error.h" -#include "qemu/guest-random.h" #ifdef CONFIG_TCG -#include "arm_ldst.h" #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-6-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/units.h" #include "qemu/log.h" #include "trace.h" #include "cpu.h" #include "internals.h" #include "exec/helper-proto.h" -#include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "qemu/timer.h" #include "qemu/bitops.h" @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include <zlib.h> /* For crc32 */ #include "hw/irq.h" -#include "semihosting/semihost.h" -#include "sysemu/cpus.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" -#include "qemu/range.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" #ifdef CONFIG_TCG -#include "arm_ldst.h" -#include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif #include "cpregs.h" -- 2.25.1 From: Claudio Fontana <cfontana@suse.de> Remove some unused headers. Signed-off-by: Claudio Fontana <cfontana@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Message-id: 20221213190537.511-7-farosas@suse.de [added back some includes that are still needed at this point] Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 - target/arm/cpu64.c | 6 ------ 2 files changed, 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/idau.h" #include "qemu/module.h" #include "qapi/error.h" -#include "qapi/visitor.h" #include "cpu.h" #ifdef CONFIG_TCG #include "hw/core/tcg-cpu-ops.h" diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "cpu.h" -#ifdef CONFIG_TCG -#include "hw/core/tcg-cpu-ops.h" -#endif /* CONFIG_TCG */ #include "qemu/module.h" -#if !defined(CONFIG_USER_ONLY) -#include "hw/loader.h" -#endif #include "sysemu/kvm.h" #include "sysemu/hvf.h" #include "kvm_arm.h" -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The pointed MouseTransformInfo structure is accessed read-only. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/input/tsc2xxx.h | 4 ++-- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 3 +-- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/input/tsc2xxx.h +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ uWireSlave *tsc2102_init(qemu_irq pint); uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); I2SCodec *tsc210x_codec(uWireSlave *chip); uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info); void tsc210x_key_event(uWireSlave *chip, int key, int down); /* tsc2005.c */ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); +void tsc2005_set_transform(void *opaque, const MouseTransformInfo *info); #endif diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav) * from the touchscreen. Assuming 12-bit precision was used during * tslib calibration. */ -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info) +void tsc2005_set_transform(void *opaque, const MouseTransformInfo *info) { TSC2005State *s = (TSC2005State *) opaque; diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ I2SCodec *tsc210x_codec(uWireSlave *chip) * from the touchscreen. Assuming 12-bit precision was used during * tslib calibration. */ -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info) +void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info) { TSC210xState *s = (TSC210xState *) chip->opaque; #if 0 -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) } /* Touchscreen and keypad controller */ -static MouseTransformInfo n800_pointercal = { +static const MouseTransformInfo n800_pointercal = { .x = 800, .y = 480, .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 }, }; -static MouseTransformInfo n810_pointercal = { +static const MouseTransformInfo n810_pointercal = { .x = 800, .y = 480, .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 }, @@ -XXX,XX +XXX,XX @@ static void n810_key_event(void *opaque, int keycode) #define M 0 -static int n810_keys[0x80] = { +static const int n810_keys[0x80] = { [0x01] = 16, /* Q */ [0x02] = 37, /* K */ [0x03] = 24, /* O */ @@ -XXX,XX +XXX,XX @@ static void n8x0_usb_setup(struct n800_s *s) /* Setup done before the main bootloader starts by some early setup code * - used when we want to run the main bootloader in emulation. This * isn't documented. */ -static uint32_t n800_pinout[104] = { +static const uint32_t n800_pinout[104] = { 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0, 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808, 0x08080808, 0x180800c4, 0x00b80000, 0x08080808, @@ -XXX,XX +XXX,XX @@ static void n8x0_boot_init(void *opaque) #define OMAP_TAG_CBUS 0x4e03 #define OMAP_TAG_EM_ASIC_BB5 0x4e04 -static struct omap_gpiosw_info_s { +static const struct omap_gpiosw_info_s { const char *name; int line; int type; @@ -XXX,XX +XXX,XX @@ static struct omap_gpiosw_info_s { { NULL } }; -static struct omap_partition_info_s { +static const struct omap_partition_info_s { uint32_t offset; uint32_t size; int mask; @@ -XXX,XX +XXX,XX @@ static struct omap_partition_info_s { { 0, 0, 0, NULL } }; -static uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; +static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; static int n8x0_atag_setup(void *p, int model) { uint8_t *b; uint16_t *w; uint32_t *l; - struct omap_gpiosw_info_s *gpiosw; - struct omap_partition_info_s *partition; + const struct omap_gpiosw_info_s *gpiosw; + const struct omap_partition_info_s *partition; const char *tag; w = p; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Silent when compiling with -Wextra: ../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers] { NULL } ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221220142520.24094-4-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ static const struct omap_gpiosw_info_s { "headphone", N8X0_HEADPHONE_GPIO, OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, }, - { NULL } + { /* end of list */ } }, n810_gpiosw_info[] = { { "gps_reset", N810_GPS_RESET_GPIO, @@ -XXX,XX +XXX,XX @@ static const struct omap_gpiosw_info_s { "slide", N810_SLIDE_GPIO, OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, }, - { NULL } + { /* end of list */ } }; static const struct omap_partition_info_s { @@ -XXX,XX +XXX,XX @@ static const struct omap_partition_info_s { { 0x00080000, 0x00200000, 0x0, "kernel" }, { 0x00280000, 0x00200000, 0x3, "initfs" }, { 0x00480000, 0x0fb80000, 0x3, "rootfs" }, - - { 0, 0, 0, NULL } + { /* end of list */ } }, n810_part_info[] = { { 0x00000000, 0x00020000, 0x3, "bootloader" }, { 0x00020000, 0x00060000, 0x0, "config" }, { 0x00080000, 0x00220000, 0x0, "kernel" }, { 0x002a0000, 0x00400000, 0x0, "initfs" }, { 0x006a0000, 0x0f960000, 0x0, "rootfs" }, - - { 0, 0, 0, NULL } + { /* end of list */ } }; static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; -- 2.25.1 From: Zhuojia Shen <chaosdefinition@hotmail.com> In CPUID registers exposed to userspace, some registers were missing and some fields were not exposed. This patch aligns exposed ID registers and their fields with what the upstream kernel currently exposes. Specifically, the following new ID registers/fields are exposed to userspace: ID_AA64PFR1_EL1.BT: bits 3-0 ID_AA64PFR1_EL1.MTE: bits 11-8 ID_AA64PFR1_EL1.SME: bits 27-24 ID_AA64ZFR0_EL1.SVEver: bits 3-0 ID_AA64ZFR0_EL1.AES: bits 7-4 ID_AA64ZFR0_EL1.BitPerm: bits 19-16 ID_AA64ZFR0_EL1.BF16: bits 23-20 ID_AA64ZFR0_EL1.SHA3: bits 35-32 ID_AA64ZFR0_EL1.SM4: bits 43-40 ID_AA64ZFR0_EL1.I8MM: bits 47-44 ID_AA64ZFR0_EL1.F32MM: bits 55-52 ID_AA64ZFR0_EL1.F64MM: bits 59-56 ID_AA64SMFR0_EL1.F32F32: bit 32 ID_AA64SMFR0_EL1.B16F32: bit 34 ID_AA64SMFR0_EL1.F16F32: bit 35 ID_AA64SMFR0_EL1.I8I32: bits 39-36 ID_AA64SMFR0_EL1.F64F64: bit 48 ID_AA64SMFR0_EL1.I16I64: bits 55-52 ID_AA64SMFR0_EL1.FA64: bit 63 ID_AA64MMFR0_EL1.ECV: bits 63-60 ID_AA64MMFR1_EL1.AFP: bits 47-44 ID_AA64MMFR2_EL1.AT: bits 35-32 ID_AA64ISAR0_EL1.RNDR: bits 63-60 ID_AA64ISAR1_EL1.FRINTTS: bits 35-32 ID_AA64ISAR1_EL1.BF16: bits 47-44 ID_AA64ISAR1_EL1.DGH: bits 51-48 ID_AA64ISAR1_EL1.I8MM: bits 55-52 ID_AA64ISAR2_EL1.WFxT: bits 3-0 ID_AA64ISAR2_EL1.RPRES: bits 7-4 ID_AA64ISAR2_EL1.GPA3: bits 11-8 ID_AA64ISAR2_EL1.APA3: bits 15-12 The code is also refactored to use symbolic names for ID register fields for better readability and maintainability. The test case in tests/tcg/aarch64/sysregs.c is also updated to match the intended behavior. Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com> Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 96 +++++++++++++++++++++++++------ tests/tcg/aarch64/sysregs.c | 24 ++++++-- tests/tcg/aarch64/Makefile.target | 7 ++- 3 files changed, 103 insertions(+), 24 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) #ifdef CONFIG_USER_ONLY static const ARMCPRegUserSpaceInfo v8_user_idregs[] = { { .name = "ID_AA64PFR0_EL1", - .exported_bits = 0x000f000f00ff0000, - .fixed_bits = 0x0000000000000011 }, + .exported_bits = R_ID_AA64PFR0_FP_MASK | + R_ID_AA64PFR0_ADVSIMD_MASK | + R_ID_AA64PFR0_SVE_MASK | + R_ID_AA64PFR0_DIT_MASK, + .fixed_bits = (0x1u << R_ID_AA64PFR0_EL0_SHIFT) | + (0x1u << R_ID_AA64PFR0_EL1_SHIFT) }, { .name = "ID_AA64PFR1_EL1", - .exported_bits = 0x00000000000000f0 }, + .exported_bits = R_ID_AA64PFR1_BT_MASK | + R_ID_AA64PFR1_SSBS_MASK | + R_ID_AA64PFR1_MTE_MASK | + R_ID_AA64PFR1_SME_MASK }, { .name = "ID_AA64PFR*_EL1_RESERVED", - .is_glob = true }, - { .name = "ID_AA64ZFR0_EL1" }, + .is_glob = true }, + { .name = "ID_AA64ZFR0_EL1", + .exported_bits = R_ID_AA64ZFR0_SVEVER_MASK | + R_ID_AA64ZFR0_AES_MASK | + R_ID_AA64ZFR0_BITPERM_MASK | + R_ID_AA64ZFR0_BFLOAT16_MASK | + R_ID_AA64ZFR0_SHA3_MASK | + R_ID_AA64ZFR0_SM4_MASK | + R_ID_AA64ZFR0_I8MM_MASK | + R_ID_AA64ZFR0_F32MM_MASK | + R_ID_AA64ZFR0_F64MM_MASK }, + { .name = "ID_AA64SMFR0_EL1", + .exported_bits = R_ID_AA64SMFR0_F32F32_MASK | + R_ID_AA64SMFR0_B16F32_MASK | + R_ID_AA64SMFR0_F16F32_MASK | + R_ID_AA64SMFR0_I8I32_MASK | + R_ID_AA64SMFR0_F64F64_MASK | + R_ID_AA64SMFR0_I16I64_MASK | + R_ID_AA64SMFR0_FA64_MASK }, { .name = "ID_AA64MMFR0_EL1", - .fixed_bits = 0x00000000ff000000 }, - { .name = "ID_AA64MMFR1_EL1" }, + .exported_bits = R_ID_AA64MMFR0_ECV_MASK, + .fixed_bits = (0xfu << R_ID_AA64MMFR0_TGRAN64_SHIFT) | + (0xfu << R_ID_AA64MMFR0_TGRAN4_SHIFT) }, + { .name = "ID_AA64MMFR1_EL1", + .exported_bits = R_ID_AA64MMFR1_AFP_MASK }, + { .name = "ID_AA64MMFR2_EL1", + .exported_bits = R_ID_AA64MMFR2_AT_MASK }, { .name = "ID_AA64MMFR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64DFR0_EL1", - .fixed_bits = 0x0000000000000006 }, - { .name = "ID_AA64DFR1_EL1" }, + .fixed_bits = (0x6u << R_ID_AA64DFR0_DEBUGVER_SHIFT) }, + { .name = "ID_AA64DFR1_EL1" }, { .name = "ID_AA64DFR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64AFR*", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64ISAR0_EL1", - .exported_bits = 0x00fffffff0fffff0 }, + .exported_bits = R_ID_AA64ISAR0_AES_MASK | + R_ID_AA64ISAR0_SHA1_MASK | + R_ID_AA64ISAR0_SHA2_MASK | + R_ID_AA64ISAR0_CRC32_MASK | + R_ID_AA64ISAR0_ATOMIC_MASK | + R_ID_AA64ISAR0_RDM_MASK | + R_ID_AA64ISAR0_SHA3_MASK | + R_ID_AA64ISAR0_SM3_MASK | + R_ID_AA64ISAR0_SM4_MASK | + R_ID_AA64ISAR0_DP_MASK | + R_ID_AA64ISAR0_FHM_MASK | + R_ID_AA64ISAR0_TS_MASK | + R_ID_AA64ISAR0_RNDR_MASK }, { .name = "ID_AA64ISAR1_EL1", - .exported_bits = 0x000000f0ffffffff }, + .exported_bits = R_ID_AA64ISAR1_DPB_MASK | + R_ID_AA64ISAR1_APA_MASK | + R_ID_AA64ISAR1_API_MASK | + R_ID_AA64ISAR1_JSCVT_MASK | + R_ID_AA64ISAR1_FCMA_MASK | + R_ID_AA64ISAR1_LRCPC_MASK | + R_ID_AA64ISAR1_GPA_MASK | + R_ID_AA64ISAR1_GPI_MASK | + R_ID_AA64ISAR1_FRINTTS_MASK | + R_ID_AA64ISAR1_SB_MASK | + R_ID_AA64ISAR1_BF16_MASK | + R_ID_AA64ISAR1_DGH_MASK | + R_ID_AA64ISAR1_I8MM_MASK }, + { .name = "ID_AA64ISAR2_EL1", + .exported_bits = R_ID_AA64ISAR2_WFXT_MASK | + R_ID_AA64ISAR2_RPRES_MASK | + R_ID_AA64ISAR2_GPA3_MASK | + R_ID_AA64ISAR2_APA3_MASK }, { .name = "ID_AA64ISAR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, }; modify_arm_cp_regs(v8_idregs, v8_user_idregs); #endif @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) #ifdef CONFIG_USER_ONLY static const ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = { { .name = "MIDR_EL1", - .exported_bits = 0x00000000ffffffff }, - { .name = "REVIDR_EL1" }, + .exported_bits = R_MIDR_EL1_REVISION_MASK | + R_MIDR_EL1_PARTNUM_MASK | + R_MIDR_EL1_ARCHITECTURE_MASK | + R_MIDR_EL1_VARIANT_MASK | + R_MIDR_EL1_IMPLEMENTER_MASK }, + { .name = "REVIDR_EL1" }, }; modify_arm_cp_regs(id_v8_midr_cp_reginfo, id_v8_user_midr_cp_reginfo); #endif diff --git a/tests/tcg/aarch64/sysregs.c b/tests/tcg/aarch64/sysregs.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/sysregs.c +++ b/tests/tcg/aarch64/sysregs.c @@ -XXX,XX +XXX,XX @@ #define HWCAP_CPUID (1 << 11) #endif +/* + * Older assemblers don't recognize newer system register names, + * but we can still access them by the Sn_n_Cn_Cn_n syntax. + */ +#define SYS_ID_AA64ISAR2_EL1 S3_0_C0_C6_2 +#define SYS_ID_AA64MMFR2_EL1 S3_0_C0_C7_2 + int failed_bit_count; /* Read and print system register `id' value */ @@ -XXX,XX +XXX,XX @@ int main(void) * minimum valid fields - for the purposes of this check allowed * to have non-zero values. */ - get_cpu_reg_check_mask(id_aa64isar0_el1, _m(00ff,ffff,f0ff,fff0)); - get_cpu_reg_check_mask(id_aa64isar1_el1, _m(0000,00f0,ffff,ffff)); + get_cpu_reg_check_mask(id_aa64isar0_el1, _m(f0ff,ffff,f0ff,fff0)); + get_cpu_reg_check_mask(id_aa64isar1_el1, _m(00ff,f0ff,ffff,ffff)); + get_cpu_reg_check_mask(SYS_ID_AA64ISAR2_EL1, _m(0000,0000,0000,ffff)); /* TGran4 & TGran64 as pegged to -1 */ - get_cpu_reg_check_mask(id_aa64mmfr0_el1, _m(0000,0000,ff00,0000)); - get_cpu_reg_check_zero(id_aa64mmfr1_el1); + get_cpu_reg_check_mask(id_aa64mmfr0_el1, _m(f000,0000,ff00,0000)); + get_cpu_reg_check_mask(id_aa64mmfr1_el1, _m(0000,f000,0000,0000)); + get_cpu_reg_check_mask(SYS_ID_AA64MMFR2_EL1, _m(0000,000f,0000,0000)); /* EL1/EL0 reported as AA64 only */ get_cpu_reg_check_mask(id_aa64pfr0_el1, _m(000f,000f,00ff,0011)); - get_cpu_reg_check_mask(id_aa64pfr1_el1, _m(0000,0000,0000,00f0)); + get_cpu_reg_check_mask(id_aa64pfr1_el1, _m(0000,0000,0f00,0fff)); /* all hidden, DebugVer fixed to 0x6 (ARMv8 debug architecture) */ get_cpu_reg_check_mask(id_aa64dfr0_el1, _m(0000,0000,0000,0006)); get_cpu_reg_check_zero(id_aa64dfr1_el1); - get_cpu_reg_check_zero(id_aa64zfr0_el1); + get_cpu_reg_check_mask(id_aa64zfr0_el1, _m(0ff0,ff0f,00ff,00ff)); +#ifdef HAS_ARMV9_SME + get_cpu_reg_check_mask(id_aa64smfr0_el1, _m(80f1,00fd,0000,0000)); +#endif get_cpu_reg_check_zero(id_aa64afr0_el1); get_cpu_reg_check_zero(id_aa64afr1_el1); diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ config-cc.mak: Makefile $(call cc-option,-march=armv8.1-a+sve2, CROSS_CC_HAS_SVE2); \ $(call cc-option,-march=armv8.3-a, CROSS_CC_HAS_ARMV8_3); \ $(call cc-option,-mbranch-protection=standard, CROSS_CC_HAS_ARMV8_BTI); \ - $(call cc-option,-march=armv8.5-a+memtag, CROSS_CC_HAS_ARMV8_MTE)) 3> config-cc.mak + $(call cc-option,-march=armv8.5-a+memtag, CROSS_CC_HAS_ARMV8_MTE); \ + $(call cc-option,-march=armv9-a+sme, CROSS_CC_HAS_ARMV9_SME)) 3> config-cc.mak -include config-cc.mak # Pauth Tests @@ -XXX,XX +XXX,XX @@ endif ifneq ($(CROSS_CC_HAS_SVE),) # System Registers Tests AARCH64_TESTS += sysregs +ifneq ($(CROSS_CC_HAS_ARMV9_SME),) +sysregs: CFLAGS+=-march=armv9-a+sme -DHAS_ARMV9_SME +else sysregs: CFLAGS+=-march=armv8.1-a+sve +endif # SVE ioctl test AARCH64_TESTS += sve-ioctls -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This function is not used anywhere outside this file, so we can make the function "static void". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 3 --- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, /* Unmap the range of all the notifiers registered to any IOMMU mr */ void smmu_inv_notifiers_all(SMMUState *s); -/* Unmap the range of all the notifiers registered to @mr */ -void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr); - #endif /* HW_ARM_SMMU_COMMON_H */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static void smmu_unmap_notifier_range(IOMMUNotifier *n) } /* Unmap all notifiers attached to @mr */ -inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) +static void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) { IOMMUNotifier *n; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)") and building with -Wall we get: hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline] hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, ^ static None of our code base require / use inlined functions with external linkage. Some places use internal inlining in the hot path. These two functions are certainly not in any hot path and don't justify any inlining, so these are likely oversights rather than intentional. Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ void smmu_iotlb_insert(SMMUState *bs, SMMUTransCfg *cfg, SMMUTLBEntry *new) g_hash_table_insert(bs->iotlb, key, new); } -inline void smmu_iotlb_inv_all(SMMUState *s) +void smmu_iotlb_inv_all(SMMUState *s) { trace_smmu_iotlb_inv_all(); g_hash_table_remove_all(s->iotlb); @@ -XXX,XX +XXX,XX @@ static gboolean smmu_hash_remove_by_asid_iova(gpointer key, gpointer value, ((entry->iova & ~info->mask) == info->iova); } -inline void -smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, - uint8_t tg, uint64_t num_pages, uint8_t ttl) +void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, + uint8_t tg, uint64_t num_pages, uint8_t ttl) { /* if tg is not set we use 4KB range invalidation */ uint8_t granule = tg ? tg * 2 + 10 : 12; @@ -XXX,XX +XXX,XX @@ smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, &info); } -inline void smmu_iotlb_inv_asid(SMMUState *s, uint16_t asid) +void smmu_iotlb_inv_asid(SMMUState *s, uint16_t asid) { trace_smmu_iotlb_inv_asid(asid); g_hash_table_foreach_remove(s->iotlb, smmu_hash_remove_by_asid, &asid); @@ -XXX,XX +XXX,XX @@ error: * * return 0 on success */ -inline int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, - SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info) +int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, + SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info) { if (!cfg->aa64) { /* -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> So far the GPT timers were unable to raise IRQs to the processor. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 5 +++++ hw/arm/fsl-imx7.c | 10 ++++++++++ 2 files changed, 15 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_USB2_IRQ = 42, FSL_IMX7_USB3_IRQ = 40, + FSL_IMX7_GPT1_IRQ = 55, + FSL_IMX7_GPT2_IRQ = 54, + FSL_IMX7_GPT3_IRQ = 53, + FSL_IMX7_GPT4_IRQ = 52, + FSL_IMX7_WDOG1_IRQ = 78, FSL_IMX7_WDOG2_IRQ = 79, FSL_IMX7_WDOG3_IRQ = 10, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPT4_ADDR, }; + static const int FSL_IMX7_GPTn_IRQ[FSL_IMX7_NUM_GPTS] = { + FSL_IMX7_GPT1_IRQ, + FSL_IMX7_GPT2_IRQ, + FSL_IMX7_GPT3_IRQ, + FSL_IMX7_GPT4_IRQ, + }; + s->gpt[i].ccm = IMX_CCM(&s->ccm); sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, FSL_IMX7_GPTn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPTn_IRQ[i])); } for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> CCM derived clocks will have to be added later. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx7_ccm.c | 49 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 9 deletions(-) diff --git a/hw/misc/imx7_ccm.c b/hw/misc/imx7_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx7_ccm.c +++ b/hw/misc/imx7_ccm.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "migration/vmstate.h" +#include "trace.h" + +#define CKIH_FREQ 24000000 /* 24MHz crystal input */ + static void imx7_analog_reset(DeviceState *dev) { IMX7AnalogState *s = IMX7_ANALOG(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx7_ccm = { static uint32_t imx7_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) { /* - * This function is "consumed" by GPT emulation code, however on - * i.MX7 each GPT block can have their own clock root. This means - * that this functions needs somehow to know requester's identity - * and the way to pass it: be it via additional IMXClk constants - * or by adding another argument to this method needs to be - * figured out + * This function is "consumed" by GPT emulation code. Some clocks + * have fixed frequencies and we can provide requested frequency + * easily. However for CCM provided clocks (like IPG) each GPT + * timer can have its own clock root. + * This means we need additionnal information when calling this + * function to know the requester's identity. */ - qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Not implemented\n", - TYPE_IMX7_CCM, __func__); - return 0; + uint32_t freq = 0; + + switch (clock) { + case CLK_NONE: + break; + case CLK_32k: + freq = CKIL_FREQ; + break; + case CLK_HIGH: + freq = CKIH_FREQ; + break; + case CLK_IPG: + case CLK_IPG_HIGH: + /* + * For now we don't have a way to figure out the device this + * function is called for. Until then the IPG derived clocks + * are left unimplemented. + */ + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Clock %d Not implemented\n", + TYPE_IMX7_CCM, __func__, clock); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", + TYPE_IMX7_CCM, __func__, clock); + break; + } + + trace_ccm_clock_freq(clock, freq); + + return freq; } static void imx7_ccm_class_init(ObjectClass *klass, void *data) -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_gpt.h | 1 + hw/arm/fsl-imx6ul.c | 2 +- hw/misc/imx6ul_ccm.c | 6 ------ hw/timer/imx_gpt.c | 25 +++++++++++++++++++++++++ 4 files changed, 27 insertions(+), 7 deletions(-) diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX25_GPT "imx25.gpt" #define TYPE_IMX31_GPT "imx31.gpt" #define TYPE_IMX6_GPT "imx6.gpt" +#define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); - object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX7_GPT); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX6UL_GPT); } /* diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6ul_ccm.c +++ b/hw/misc/imx6ul_ccm.c @@ -XXX,XX +XXX,XX @@ static uint32_t imx6ul_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) case CLK_32k: freq = CKIL_FREQ; break; - case CLK_HIGH: - freq = CKIH_FREQ; - break; - case CLK_HIGH_DIV: - freq = CKIH_FREQ / 8; - break; default: qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", TYPE_IMX6UL_CCM, __func__, clock); diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ static const IMXClk imx6_gpt_clocks[] = { CLK_HIGH, /* 111 reference clock */ }; +static const IMXClk imx6ul_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz*/ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_NONE, /* 101 not defined */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + static const IMXClk imx7_gpt_clocks[] = { CLK_NONE, /* 000 No clock source */ CLK_IPG, /* 001 ipg_clk, 532MHz*/ @@ -XXX,XX +XXX,XX @@ static void imx6_gpt_init(Object *obj) s->clocks = imx6_gpt_clocks; } +static void imx6ul_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx6ul_gpt_clocks; +} + static void imx7_gpt_init(Object *obj) { IMXGPTState *s = IMX_GPT(obj); @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx6_gpt_info = { .instance_init = imx6_gpt_init, }; +static const TypeInfo imx6ul_gpt_info = { + .name = TYPE_IMX6UL_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx6ul_gpt_init, +}; + static const TypeInfo imx7_gpt_info = { .name = TYPE_IMX7_GPT, .parent = TYPE_IMX25_GPT, @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx25_gpt_info); type_register_static(&imx31_gpt_info); type_register_static(&imx6_gpt_info); + type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); } -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> IRQs were not associated to the various GPIO devices inside i.MX7D. This patch brings the i.MX7D on par with i.MX6. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 20221226101418.415170-1-jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 15 +++++++++++++++ hw/arm/fsl-imx7.c | 31 ++++++++++++++++++++++++++++++- 2 files changed, 45 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_GPT3_IRQ = 53, FSL_IMX7_GPT4_IRQ = 52, + FSL_IMX7_GPIO1_LOW_IRQ = 64, + FSL_IMX7_GPIO1_HIGH_IRQ = 65, + FSL_IMX7_GPIO2_LOW_IRQ = 66, + FSL_IMX7_GPIO2_HIGH_IRQ = 67, + FSL_IMX7_GPIO3_LOW_IRQ = 68, + FSL_IMX7_GPIO3_HIGH_IRQ = 69, + FSL_IMX7_GPIO4_LOW_IRQ = 70, + FSL_IMX7_GPIO4_HIGH_IRQ = 71, + FSL_IMX7_GPIO5_LOW_IRQ = 72, + FSL_IMX7_GPIO5_HIGH_IRQ = 73, + FSL_IMX7_GPIO6_LOW_IRQ = 74, + FSL_IMX7_GPIO6_HIGH_IRQ = 75, + FSL_IMX7_GPIO7_LOW_IRQ = 76, + FSL_IMX7_GPIO7_HIGH_IRQ = 77, + FSL_IMX7_WDOG1_IRQ = 78, FSL_IMX7_WDOG2_IRQ = 79, FSL_IMX7_WDOG3_IRQ = 10, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPIO7_ADDR, }; + static const int FSL_IMX7_GPIOn_LOW_IRQ[FSL_IMX7_NUM_GPIOS] = { + FSL_IMX7_GPIO1_LOW_IRQ, + FSL_IMX7_GPIO2_LOW_IRQ, + FSL_IMX7_GPIO3_LOW_IRQ, + FSL_IMX7_GPIO4_LOW_IRQ, + FSL_IMX7_GPIO5_LOW_IRQ, + FSL_IMX7_GPIO6_LOW_IRQ, + FSL_IMX7_GPIO7_LOW_IRQ, + }; + + static const int FSL_IMX7_GPIOn_HIGH_IRQ[FSL_IMX7_NUM_GPIOS] = { + FSL_IMX7_GPIO1_HIGH_IRQ, + FSL_IMX7_GPIO2_HIGH_IRQ, + FSL_IMX7_GPIO3_HIGH_IRQ, + FSL_IMX7_GPIO4_HIGH_IRQ, + FSL_IMX7_GPIO5_HIGH_IRQ, + FSL_IMX7_GPIO6_HIGH_IRQ, + FSL_IMX7_GPIO7_HIGH_IRQ, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, FSL_IMX7_GPIOn_ADDR[i]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, + FSL_IMX7_GPIOn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPIOn_LOW_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPIOn_HIGH_IRQ[i])); } /* -- 2.25.1 From: Stephen Longfield <slongfield@google.com> Size is used at lines 1088/1188 for the loop, which reads the last 4 bytes from the crc_ptr so it does need to get increased, however it shouldn't be increased before the buffer is passed to CRC computation, or the crc32 function will access uninitialized memory. This was pointed out to me by clg@kaod.org during the code review of a similar patch to hw/net/ftgmac100.c Change-Id: Ib0464303b191af1e28abeb2f5105eb25aadb5e9b Signed-off-by: Stephen Longfield <slongfield@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20221221183202.3788132-1-slongfield@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/imx_fec.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static ssize_t imx_fec_receive(NetClientState *nc, const uint8_t *buf, return 0; } - /* 4 bytes for the CRC. */ - size += 4; crc = cpu_to_be32(crc32(~0, buf, size)); + /* Increase size by 4, loop below reads the last 4 bytes from crc_ptr. */ + size += 4; crc_ptr = (uint8_t *) &crc; /* Huge frames are truncated. */ @@ -XXX,XX +XXX,XX @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf, return 0; } - /* 4 bytes for the CRC. */ - size += 4; crc = cpu_to_be32(crc32(~0, buf, size)); + /* Increase size by 4, loop below reads the last 4 bytes from crc_ptr. */ + size += 4; crc_ptr = (uint8_t *) &crc; if (shift16) { -- 2.25.1