Arm queue; some of the simpler stuff, things other have reviewed (thanks!), etc. -- PMM The following changes since commit 5d2f557b47dfbf8f23277a5bdd8473d4607c681a: Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging (2020-06-05 13:53:05 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200605 for you to fetch changes up to 2c35a39eda0b16c2ed85c94cec204bf5efb97812: target/arm: Convert Neon one-register-and-immediate insns to decodetree (2020-06-05 17:23:10 +0100) ---------------------------------------------------------------- target-arm queue: hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() target/arm: Convert crypto insns to gvec hw/adc/stm32f2xx_adc: Correct memory region size and access size tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system: Document Aspeed boards raspi: Add model of the USB controller target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree ---------------------------------------------------------------- Cédric Le Goater (1): docs/system: Document Aspeed boards Eden Mikitas (2): hw/ssi/imx_spi: changed while statement to prevent underflow hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave Paul Zimmerman (7): raspi: add BCM2835 SOC MPHI emulation dwc-hsotg (dwc2) USB host controller register definitions dwc-hsotg (dwc2) USB host controller state definitions dwc-hsotg (dwc2) USB host controller emulation usb: add short-packet handling to usb-storage driver wire in the dwc-hsotg (dwc2) USB host controller emulation raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host Peter Maydell (9): target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree target/arm: Convert Neon narrowing shifts with op==8 to decodetree target/arm: Convert Neon narrowing shifts with op==9 to decodetree target/arm: Convert Neon VSHLL, VMOVL to decodetree target/arm: Convert VCVT fixed-point ops to decodetree target/arm: Convert Neon one-register-and-immediate insns to decodetree Philippe Mathieu-Daudé (3): hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() hw/adc/stm32f2xx_adc: Correct memory region size and access size Richard Henderson (6): target/arm: Convert aes and sm4 to gvec helpers target/arm: Convert rax1 to gvec helpers target/arm: Convert sha512 and sm3 to gvec helpers target/arm: Convert sha1 and sha256 to gvec helpers target/arm: Split helper_crypto_sha1_3reg target/arm: Split helper_crypto_sm3tt Thomas Huth (1): tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system/arm/aspeed.rst | 85 ++ docs/system/target-arm.rst | 1 + hw/usb/hcd-dwc2.h | 190 +++++ include/hw/arm/bcm2835_peripherals.h | 5 +- include/hw/misc/bcm2835_mphi.h | 44 + include/hw/usb/dwc2-regs.h | 899 ++++++++++++++++++++ target/arm/helper.h | 45 +- target/arm/translate-a64.h | 3 + target/arm/vec_internal.h | 33 + target/arm/neon-dp.decode | 214 ++++- hw/adc/stm32f2xx_adc.c | 4 +- hw/arm/bcm2835_peripherals.c | 38 +- hw/arm/pxa2xx.c | 66 +- hw/input/pxa2xx_keypad.c | 10 +- hw/misc/bcm2835_mphi.c | 191 +++++ hw/ssi/imx_spi.c | 4 +- hw/usb/dev-storage.c | 15 +- hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++ target/arm/crypto_helper.c | 267 ++++-- target/arm/translate-a64.c | 198 ++--- target/arm/translate-neon.inc.c | 796 ++++++++++++++---- target/arm/translate.c | 539 +----------- target/arm/vec_helper.c | 12 +- hw/misc/Makefile.objs | 1 + hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/trace-events | 50 ++ tests/acceptance/boot_linux_console.py | 35 +- 28 files changed, 4258 insertions(+), 910 deletions(-) create mode 100644 docs/system/arm/aspeed.rst create mode 100644 hw/usb/hcd-dwc2.h create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 include/hw/usb/dwc2-regs.h create mode 100644 target/arm/vec_internal.h create mode 100644 hw/misc/bcm2835_mphi.c create mode 100644 hw/usb/hcd-dwc2.c From: Eden Mikitas <e.mikitas@gmail.com> The while statement in question only checked if tx_burst is not 0. tx_burst is a signed int, which is assigned the value put by the guest driver in ECSPI_CONREG. The burst length can be anywhere between 1 and 4096, and since tx_burst is always decremented by 8 it could possibly underflow, causing an infinite loop. Signed-off-by: Eden Mikitas <e.mikitas@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) rx = 0; - while (tx_burst) { + while (tx_burst > 0) { uint8_t byte = tx & 0xff; DPRINTF("writing 0x%02x\n", (uint32_t)byte); -- 2.20.1 From: Eden Mikitas <e.mikitas@gmail.com> When inserting the value retrieved (rx) from the spi slave, rx is pushed to rx_fifo after being cast to uint8_t. rx_fifo is a fifo32, and the rx register the driver uses is also 32 bit. This zeroes the 24 most significant bits of rx. This proved problematic with devices that expect to use the whole 32 bits of the rx register. Signed-off-by: Eden Mikitas <e.mikitas@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) if (fifo32_is_full(&s->rx_fifo)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_RO; } else { - fifo32_push(&s->rx_fifo, (uint8_t)rx); + fifo32_push(&s->rx_fifo, rx); } if (s->burst_length <= 0) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask() (missed in commit 5a0001ec7e). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/input/pxa2xx_keypad.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/input/pxa2xx_keypad.c b/hw/input/pxa2xx_keypad.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/pxa2xx_keypad.c +++ b/hw/input/pxa2xx_keypad.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "migration/vmstate.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_keypad_read(void *opaque, hwaddr offset, return s->kpkdi; break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_keypad_write(void *opaque, hwaddr offset, break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Replace printf() calls by qemu_log_mask(), which is disabled by default. This avoid flooding the terminal when fuzzing the device. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 66 ++++++++++++++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 17 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/blockdev.h" #include "sysemu/qtest.h" #include "qemu/cutils.h" +#include "qemu/log.h" static struct { hwaddr io_base; @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_pm_read(void *opaque, hwaddr addr, return s->pm_regs[addr >> 2]; default: fail: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_pm_write(void *opaque, hwaddr addr, s->pm_regs[addr >> 2] = value; break; } - - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_cm_read(void *opaque, hwaddr addr, return s->cm_regs[CCCR >> 2] | (3 << 28); default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_cm_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_mm_read(void *opaque, hwaddr addr, return s->mm_regs[addr >> 2]; /* fall through */ default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_mm_write(void *opaque, hwaddr addr, } default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_ssp_read(void *opaque, hwaddr addr, case SSACD: return s->ssacd; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_ssp_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_rtc_read(void *opaque, hwaddr addr, else return s->last_swcr; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_i2c_read(void *opaque, hwaddr addr, s->ibmr = 0; return s->ibmr; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_i2c_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_i2s_read(void *opaque, hwaddr addr, } return 0; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_i2s_write(void *opaque, hwaddr addr, } break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_fir_read(void *opaque, hwaddr addr, case ICFOR: return s->rx_len; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_fir_write(void *opaque, hwaddr addr, case ICFOR: break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> With this conversion, we will be able to use the same helpers with sve. In particular, pass 3 vector parameters for the 3-operand operations; for advsimd the destination register is also an input. This also fixes a bug in which we failed to clear the high bits of the SVE register after an AdvSIMD operation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 6 ++-- target/arm/vec_internal.h | 33 +++++++++++++++++ target/arm/crypto_helper.c | 72 +++++++++++++++++++++++++++----------- target/arm/translate-a64.c | 55 ++++++++++++++++++----------- target/arm/translate.c | 27 +++++++------- target/arm/vec_helper.c | 12 +------ 6 files changed, 138 insertions(+), 67 deletions(-) create mode 100644 target/arm/vec_internal.h diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(neon_qzip8, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_2(neon_qzip16, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_2(neon_qzip32, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) diff --git a/target/arm/vec_internal.h b/target/arm/vec_internal.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_internal.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Helpers + * + * Copyright (c) 2020 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARM_VEC_INTERNALS_H +#define TARGET_ARM_VEC_INTERNALS_H + +static inline void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + +#endif /* TARGET_ARM_VEC_INTERNALS_H */ diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" #include "crypto/aes.h" +#include "vec_internal.h" union CRYPTO_STATE { uint8_t bytes[16]; @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { #define CR_ST_WORD(state, i) (state.words[i]) #endif -void HELPER(crypto_aese)(void *vd, void *vm, uint32_t decrypt) +static void do_crypto_aese(uint64_t *rd, uint64_t *rn, + uint64_t *rm, bool decrypt) { static uint8_t const * const sbox[2] = { AES_sbox, AES_isbox }; static uint8_t const * const shift[2] = { AES_shifts, AES_ishifts }; - uint64_t *rd = vd; - uint64_t *rm = vm; union CRYPTO_STATE rk = { .l = { rm[0], rm[1] } }; - union CRYPTO_STATE st = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE st = { .l = { rn[0], rn[1] } }; int i; - assert(decrypt < 2); - /* xor state vector with round key */ rk.l[0] ^= st.l[0]; rk.l[1] ^= st.l[1]; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aese)(void *vd, void *vm, uint32_t decrypt) rd[1] = st.l[1]; } -void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) +void HELPER(crypto_aese)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + bool decrypt = simd_data(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_aese(vd + i, vn + i, vm + i, decrypt); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + +static void do_crypto_aesmc(uint64_t *rd, uint64_t *rm, bool decrypt) { static uint32_t const mc[][256] = { { /* MixColumns lookup table */ @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) 0xbe805d9f, 0xb58d5491, 0xa89a4f83, 0xa397468d, } }; - uint64_t *rd = vd; - uint64_t *rm = vm; union CRYPTO_STATE st = { .l = { rm[0], rm[1] } }; int i; - assert(decrypt < 2); - for (i = 0; i < 16; i += 4) { CR_ST_WORD(st, i >> 2) = mc[decrypt][CR_ST_BYTE(st, i)] ^ @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) rd[1] = st.l[1]; } +void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + bool decrypt = simd_data(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_aesmc(vd + i, vm + i, decrypt); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + /* * SHA-1 logical functions */ @@ -XXX,XX +XXX,XX @@ static uint8_t const sm4_sbox[] = { 0x79, 0xee, 0x5f, 0x3e, 0xd7, 0xcb, 0x39, 0x48, }; -void HELPER(crypto_sm4e)(void *vd, void *vn) +static void do_crypto_sm4e(uint64_t *rd, uint64_t *rn, uint64_t *rm) { - uint64_t *rd = vd; - uint64_t *rn = vn; - union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; - union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE d = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE n = { .l = { rm[0], rm[1] } }; uint32_t t, i; for (i = 0; i < 4; i++) { @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4e)(void *vd, void *vn) rd[1] = d.l[1]; } -void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) +void HELPER(crypto_sm4e)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_sm4e(vd + i, vn + i, vm + i); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + +static void do_crypto_sm4ekey(uint64_t *rd, uint64_t *rn, uint64_t *rm) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) rd[0] = d.l[0]; rd[1] = d.l[1]; } + +void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_sm4ekey(vd + i, vn + i, vm + i); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_fn4(DisasContext *s, bool is_q, int rd, int rn, int rm, is_q ? 16 : 8, vec_full_reg_size(s)); } +/* Expand a 2-operand operation using an out-of-line helper. */ +static void gen_gvec_op2_ool(DisasContext *s, bool is_q, int rd, + int rn, int data, gen_helper_gvec_2 *fn) +{ + tcg_gen_gvec_2_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); +} + /* Expand a 3-operand operation using an out-of-line helper. */ static void gen_gvec_op3_ool(DisasContext *s, bool is_q, int rd, int rn, int rm, int data, gen_helper_gvec_3 *fn) @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); int decrypt; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; - TCGv_i32 tcg_decrypt; - CryptoThreeOpIntFn *genfn; + gen_helper_gvec_2 *genfn2 = NULL; + gen_helper_gvec_3 *genfn3 = NULL; if (!dc_isar_feature(aa64_aes, s) || size != 0) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) switch (opcode) { case 0x4: /* AESE */ decrypt = 0; - genfn = gen_helper_crypto_aese; + genfn3 = gen_helper_crypto_aese; break; case 0x6: /* AESMC */ decrypt = 0; - genfn = gen_helper_crypto_aesmc; + genfn2 = gen_helper_crypto_aesmc; break; case 0x5: /* AESD */ decrypt = 1; - genfn = gen_helper_crypto_aese; + genfn3 = gen_helper_crypto_aese; break; case 0x7: /* AESIMC */ decrypt = 1; - genfn = gen_helper_crypto_aesmc; + genfn2 = gen_helper_crypto_aesmc; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_decrypt = tcg_const_i32(decrypt); - - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_decrypt); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_i32(tcg_decrypt); + if (genfn2) { + gen_gvec_op2_ool(s, true, rd, rn, decrypt, genfn2); + } else { + gen_gvec_op3_ool(s, true, rd, rd, rn, decrypt, genfn3); + } } /* Crypto three-reg SHA @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool feature; - CryptoThreeOpFn *genfn; + CryptoThreeOpFn *genfn = NULL; + gen_helper_gvec_3 *oolfn = NULL; if (o == 0) { switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; case 2: /* SM4EKEY */ feature = dc_isar_feature(aa64_sm4, s); - genfn = gen_helper_crypto_sm4ekey; + oolfn = gen_helper_crypto_sm4ekey; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) return; } + if (oolfn) { + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); + return; + } + if (genfn) { TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; bool feature; CryptoTwoOpFn *genfn; + gen_helper_gvec_3 *oolfn = NULL; switch (opcode) { case 0: /* SHA512SU0 */ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) break; case 1: /* SM4E */ feature = dc_isar_feature(aa64_sm4, s); - genfn = gen_helper_crypto_sm4e; + oolfn = gen_helper_crypto_sm4e; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) return; } + if (oolfn) { + gen_gvec_op3_ool(s, true, rd, rd, rn, 0, oolfn); + return; + } + tcg_rd_ptr = vec_full_reg_ptr(s, rd); tcg_rn_ptr = vec_full_reg_ptr(s, rn); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa32_aes, s) || ((rm | rd) & 1)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - - /* Bit 6 is the lowest opcode bit; it distinguishes between - * encryption (AESE/AESMC) and decryption (AESD/AESIMC) - */ - tmp3 = tcg_const_i32(extract32(insn, 6, 1)); - + /* + * Bit 6 is the lowest opcode bit; it distinguishes + * between encryption (AESE/AESMC) and decryption + * (AESD/AESIMC). + */ if (op == NEON_2RM_AESE) { - gen_helper_crypto_aese(ptr1, ptr2, tmp3); + tcg_gen_gvec_3_ool(vfp_reg_offset(true, rd), + vfp_reg_offset(true, rd), + vfp_reg_offset(true, rm), + 16, 16, extract32(insn, 6, 1), + gen_helper_crypto_aese); } else { - gen_helper_crypto_aesmc(ptr1, ptr2, tmp3); + tcg_gen_gvec_2_ool(vfp_reg_offset(true, rd), + vfp_reg_offset(true, rm), + 16, 16, extract32(insn, 6, 1), + gen_helper_crypto_aesmc); } - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_i32(tmp3); break; case NEON_2RM_SHA1H: if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" #include "fpu/softfloat.h" - +#include "vec_internal.h" /* Note that vector data is stored in host-endian 64-bit chunks, so addressing units smaller than that needs a host-endian fixup. */ @@ -XXX,XX +XXX,XX @@ #define H4(x) (x) #endif -static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) -{ - uint64_t *d = vd + opr_sz; - uintptr_t i; - - for (i = opr_sz; i < max_sz; i += 8) { - *d++ = 0; - } -} - /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static int16_t inl_qrdmlah_s16(int16_t src1, int16_t src2, int16_t src3, uint32_t *sat) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> With this conversion, we will be able to use the same helpers with sve. This also fixes a bug in which we failed to clear the high bits of the SVE register after an AdvSIMD operation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 ++ target/arm/translate-a64.h | 3 ++ target/arm/crypto_helper.c | 11 +++++++ target/arm/translate-a64.c | 59 ++++++++++++++++++++------------------ 4 files changed, 47 insertions(+), 28 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_rax1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int vec_full_reg_size(DisasContext *s) bool disas_sve(DisasContext *, uint32_t); +void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, + uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz); + #endif /* TARGET_ARM_TRANSLATE_A64_H */ diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm, uint32_t desc) } clear_tail(vd, opr_sz, simd_maxsz(desc)); } + +void HELPER(crypto_rax1)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + uint64_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 8; ++i) { + d[i] = n[i] ^ rol64(m[i], 1); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); } +static void gen_rax1_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m) +{ + tcg_gen_rotli_i64(d, m, 1); + tcg_gen_xor_i64(d, d, n); +} + +static void gen_rax1_vec(unsigned vece, TCGv_vec d, TCGv_vec n, TCGv_vec m) +{ + tcg_gen_rotli_vec(vece, d, m, 1); + tcg_gen_xor_vec(vece, d, d, n); +} + +void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, + uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz) +{ + static const TCGOpcode vecop_list[] = { INDEX_op_rotli_vec, 0 }; + static const GVecGen3 op = { + .fni8 = gen_rax1_i64, + .fniv = gen_rax1_vec, + .opt_opc = vecop_list, + .fno = gen_helper_crypto_rax1, + .vece = MO_64, + }; + tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz, &op); +} + /* Crypto three-reg SHA512 * 31 21 20 16 15 14 13 12 11 10 9 5 4 0 * +-----------------------+------+---+---+-----+--------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) bool feature; CryptoThreeOpFn *genfn = NULL; gen_helper_gvec_3 *oolfn = NULL; + GVecGen3Fn *gvecfn = NULL; if (o == 0) { switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; case 3: /* RAX1 */ feature = dc_isar_feature(aa64_sha3, s); - genfn = NULL; + gvecfn = gen_gvec_rax1; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) if (oolfn) { gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); - return; - } - - if (genfn) { + } else if (gvecfn) { + gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); + } else { TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; tcg_rd_ptr = vec_full_reg_ptr(s, rd); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rd_ptr); tcg_temp_free_ptr(tcg_rn_ptr); tcg_temp_free_ptr(tcg_rm_ptr); - } else { - TCGv_i64 tcg_op1, tcg_op2, tcg_res[2]; - int pass; - - tcg_op1 = tcg_temp_new_i64(); - tcg_op2 = tcg_temp_new_i64(); - tcg_res[0] = tcg_temp_new_i64(); - tcg_res[1] = tcg_temp_new_i64(); - - for (pass = 0; pass < 2; pass++) { - read_vec_element(s, tcg_op1, rn, pass, MO_64); - read_vec_element(s, tcg_op2, rm, pass, MO_64); - - tcg_gen_rotli_i64(tcg_res[pass], tcg_op2, 1); - tcg_gen_xor_i64(tcg_res[pass], tcg_res[pass], tcg_op1); - } - write_vec_element(s, tcg_res[0], rd, 0, MO_64); - write_vec_element(s, tcg_res[1], rd, 1, MO_64); - - tcg_temp_free_i64(tcg_op1); - tcg_temp_free_i64(tcg_op2); - tcg_temp_free_i64(tcg_res[0]); - tcg_temp_free_i64(tcg_res[1]); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not yet convert the helpers to loop over opr_sz, but the descriptor allows the vector tail to be cleared. Which fixes an existing bug vs SVE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 15 +++++++----- target/arm/crypto_helper.c | 37 +++++++++++++++++++++++----- target/arm/translate-a64.c | 50 ++++++++++++-------------------------- 3 files changed, 55 insertions(+), 47 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha512su1, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) -DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sm3partw1, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3partw2, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { #define CR_ST_WORD(state, i) (state.words[i]) #endif +/* + * The caller has not been converted to full gvec, and so only + * modifies the low 16 bytes of the vector register. + */ +static void clear_tail_16(void *vd, uint32_t desc) +{ + int opr_sz = simd_oprsz(desc); + int max_sz = simd_maxsz(desc); + + assert(opr_sz == 16); + clear_tail(vd, opr_sz, max_sz); +} + static void do_crypto_aese(uint64_t *rd, uint64_t *rn, uint64_t *rm, bool decrypt) { @@ -XXX,XX +XXX,XX @@ static uint64_t s1_512(uint64_t x) return ror64(x, 19) ^ ror64(x, 61) ^ (x >> 6); } -void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512su0)(void *vd, void *vn) +void HELPER(crypto_sha512su0)(void *vd, void *vn, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su0)(void *vd, void *vn) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) rd[0] += s1_512(rn[0]) + rm[0]; rd[1] += s1_512(rn[1]) + rm[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool feature; - CryptoThreeOpFn *genfn = NULL; gen_helper_gvec_3 *oolfn = NULL; GVecGen3Fn *gvecfn = NULL; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SHA512H */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512h; + oolfn = gen_helper_crypto_sha512h; break; case 1: /* SHA512H2 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512h2; + oolfn = gen_helper_crypto_sha512h2; break; case 2: /* SHA512SU1 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512su1; + oolfn = gen_helper_crypto_sha512su1; break; case 3: /* RAX1 */ feature = dc_isar_feature(aa64_sha3, s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SM3PARTW1 */ feature = dc_isar_feature(aa64_sm3, s); - genfn = gen_helper_crypto_sm3partw1; + oolfn = gen_helper_crypto_sm3partw1; break; case 1: /* SM3PARTW2 */ feature = dc_isar_feature(aa64_sm3, s); - genfn = gen_helper_crypto_sm3partw2; + oolfn = gen_helper_crypto_sm3partw2; break; case 2: /* SM4EKEY */ feature = dc_isar_feature(aa64_sm4, s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) if (oolfn) { gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); - } else if (gvecfn) { - gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); } else { - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); + gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); } } @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) int opcode = extract32(insn, 10, 2); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; bool feature; - CryptoTwoOpFn *genfn; - gen_helper_gvec_3 *oolfn = NULL; switch (opcode) { case 0: /* SHA512SU0 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512su0; break; case 1: /* SM4E */ feature = dc_isar_feature(aa64_sm4, s); - oolfn = gen_helper_crypto_sm4e; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) return; } - if (oolfn) { - gen_gvec_op3_ool(s, true, rd, rd, rn, 0, oolfn); - return; + switch (opcode) { + case 0: /* SHA512SU0 */ + gen_gvec_op2_ool(s, true, rd, rn, 0, gen_helper_crypto_sha512su0); + break; + case 1: /* SM4E */ + gen_gvec_op3_ool(s, true, rd, rd, rn, 0, gen_helper_crypto_sm4e); + break; + default: + g_assert_not_reached(); } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - - genfn(tcg_rd_ptr, tcg_rn_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); } /* Crypto four-register -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not yet convert the helpers to loop over opr_sz, but the descriptor allows the vector tail to be cleared. Which fixes an existing bug vs SVE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 12 ++-- target/arm/neon-dp.decode | 12 ++-- target/arm/crypto_helper.c | 24 +++++-- target/arm/translate-a64.c | 34 ++++----- target/arm/translate-neon.inc.c | 124 +++++--------------------------- target/arm/translate.c | 24 ++----- 6 files changed, 67 insertions(+), 163 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) -DEF_HELPER_FLAGS_2(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(crypto_sha256h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sha256h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VPADD_3s 1111 001 0 0 . .. .... .... 1011 . . . 1 .... @3same_q0 VQRDMLAH_3s 1111 001 1 0 . .. .... .... 1011 ... 1 .... @3same +@3same_crypto .... .... .... .... .... .... .... .... \ + &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=0 q=1 + SHA1_3s 1111 001 0 0 . optype:2 .... .... 1100 . 1 . 0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto VFMA_fp_3s 1111 001 0 0 . 0 . .... .... 1100 ... 1 .... @3same_fp VFMS_fp_3s 1111 001 0 0 . 1 . .... .... 1100 ... 1 .... @3same_fp diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1_3reg)(void *vd, void *vn, void *vm, uint32_t op) rd[1] = d.l[1]; } -void HELPER(crypto_sha1h)(void *vd, void *vm) +void HELPER(crypto_sha1h)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1h)(void *vd, void *vm) rd[0] = m.l[0]; rd[1] = m.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha1su1)(void *vd, void *vm) +void HELPER(crypto_sha1su1)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1su1)(void *vd, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } /* @@ -XXX,XX +XXX,XX @@ static uint32_t s1(uint32_t x) return ror32(x, 17) ^ ror32(x, 19) ^ (x >> 10); } -void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256su0)(void *vd, void *vm) +void HELPER(crypto_sha256su0)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su0)(void *vd, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) int rm = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - CryptoThreeOpFn *genfn; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; + gen_helper_gvec_3 *genfn; bool feature; if (size != 0) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) return; } - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - if (genfn) { - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); } else { TCGv_i32 tcg_opcode = tcg_const_i32(opcode); + TCGv_ptr tcg_rd_ptr = vec_full_reg_ptr(s, rd); + TCGv_ptr tcg_rn_ptr = vec_full_reg_ptr(s, rn); + TCGv_ptr tcg_rm_ptr = vec_full_reg_ptr(s, rm); gen_helper_crypto_sha1_3reg(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_opcode); - tcg_temp_free_i32(tcg_opcode); - } - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); + tcg_temp_free_i32(tcg_opcode); + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); + tcg_temp_free_ptr(tcg_rm_ptr); + } } /* Crypto two-reg SHA @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) int opcode = extract32(insn, 12, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - CryptoTwoOpFn *genfn; + gen_helper_gvec_2 *genfn; bool feature; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; if (size != 0) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - - genfn(tcg_rd_ptr, tcg_rn_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); + gen_gvec_op2_ool(s, true, rd, rn, 0, genfn); } static void gen_rax1_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m) diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_3SAME_CMP(VCGE_S, TCG_COND_GE) DO_3SAME_CMP(VCGE_U, TCG_COND_GEU) DO_3SAME_CMP(VCEQ, TCG_COND_EQ) -static void gen_VMUL_p_3s(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, - uint32_t rm_ofs, uint32_t oprsz, uint32_t maxsz) -{ - tcg_gen_gvec_3_ool(rd_ofs, rn_ofs, rm_ofs, oprsz, maxsz, - 0, gen_helper_gvec_pmul_b); -} +#define WRAP_OOL_FN(WRAPNAME, FUNC) \ + static void WRAPNAME(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, \ + uint32_t rm_ofs, uint32_t oprsz, uint32_t maxsz) \ + { \ + tcg_gen_gvec_3_ool(rd_ofs, rn_ofs, rm_ofs, oprsz, maxsz, 0, FUNC); \ + } + +WRAP_OOL_FN(gen_VMUL_p_3s, gen_helper_gvec_pmul_b) static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a) { @@ -XXX,XX +XXX,XX @@ static bool trans_SHA1_3s(DisasContext *s, arg_SHA1_3s *a) return true; } -static bool trans_SHA256H_3s(DisasContext *s, arg_SHA256H_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; +#define DO_SHA2(NAME, FUNC) \ + WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ + static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \ + { \ + if (!dc_isar_feature(aa32_sha2, s)) { \ + return false; \ + } \ + return do_3same(s, a, gen_##NAME##_3s); \ } - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256h(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} - -static bool trans_SHA256H2_3s(DisasContext *s, arg_SHA256H2_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256h2(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} - -static bool trans_SHA256SU1_3s(DisasContext *s, arg_SHA256SU1_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256su1(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} +DO_SHA2(SHA256H, gen_helper_crypto_sha256h) +DO_SHA2(SHA256H2, gen_helper_crypto_sha256h2) +DO_SHA2(SHA256SU1, gen_helper_crypto_sha256su1) #define DO_3SAME_64(INSN, FUNC) \ static void gen_##INSN##_3s(unsigned vece, uint32_t rd_ofs, \ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int vec_size; uint32_t imm; TCGv_i32 tmp, tmp2, tmp3, tmp4, tmp5; - TCGv_ptr ptr1, ptr2; + TCGv_ptr ptr1; TCGv_i64 tmp64; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - - gen_helper_crypto_sha1h(ptr1, ptr2); - - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, + gen_helper_crypto_sha1h); break; case NEON_2RM_SHA1SU1: if ((rm | rd) & 1) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } else if (!dc_isar_feature(aa32_sha1, s)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - if (q) { - gen_helper_crypto_sha256su0(ptr1, ptr2); - } else { - gen_helper_crypto_sha1su1(ptr1, ptr2); - } - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, + q ? gen_helper_crypto_sha256su0 + : gen_helper_crypto_sha1su1); break; - case NEON_2RM_VMVN: tcg_gen_gvec_not(0, rd_ofs, rm_ofs, vec_size, vec_size); break; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than passing an opcode to a helper, fully decode the operation at translate time. Use clear_tail_16 to zap the balance of the SVE register with the AdvSIMD write. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 +- target/arm/neon-dp.decode | 6 +- target/arm/crypto_helper.c | 99 +++++++++++++++++++++------------ target/arm/translate-a64.c | 29 ++++------ target/arm/translate-neon.inc.c | 46 ++++----------- 5 files changed, 93 insertions(+), 92 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(neon_qzip32, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1su0, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1c, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1p, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1m, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr, i32) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VQRDMLAH_3s 1111 001 1 0 . .. .... .... 1011 ... 1 .... @3same @3same_crypto .... .... .... .... .... .... .... .... \ &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=0 q=1 -SHA1_3s 1111 001 0 0 . optype:2 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +SHA1C_3s 1111 001 0 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1P_3s 1111 001 0 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1M_3s 1111 001 0 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1SU0_3s 1111 001 0 0 . 11 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { }; #ifdef HOST_WORDS_BIGENDIAN -#define CR_ST_BYTE(state, i) (state.bytes[(15 - (i)) ^ 8]) -#define CR_ST_WORD(state, i) (state.words[(3 - (i)) ^ 2]) +#define CR_ST_BYTE(state, i) ((state).bytes[(15 - (i)) ^ 8]) +#define CR_ST_WORD(state, i) ((state).words[(3 - (i)) ^ 2]) #else -#define CR_ST_BYTE(state, i) (state.bytes[i]) -#define CR_ST_WORD(state, i) (state.words[i]) +#define CR_ST_BYTE(state, i) ((state).bytes[i]) +#define CR_ST_WORD(state, i) ((state).words[i]) #endif /* @@ -XXX,XX +XXX,XX @@ static uint32_t maj(uint32_t x, uint32_t y, uint32_t z) return (x & y) | ((x | y) & z); } -void HELPER(crypto_sha1_3reg)(void *vd, void *vn, void *vm, uint32_t op) +void HELPER(crypto_sha1su0)(void *vd, void *vn, void *vm, uint32_t desc) +{ + uint64_t *d = vd, *n = vn, *m = vm; + uint64_t d0, d1; + + d0 = d[1] ^ d[0] ^ m[0]; + d1 = n[0] ^ d[1] ^ m[1]; + d[0] = d0; + d[1] = d1; + + clear_tail_16(vd, desc); +} + +static inline void crypto_sha1_3reg(uint64_t *rd, uint64_t *rn, + uint64_t *rm, uint32_t desc, + uint32_t (*fn)(union CRYPTO_STATE *d)) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + int i; - if (op == 3) { /* sha1su0 */ - d.l[0] ^= d.l[1] ^ m.l[0]; - d.l[1] ^= n.l[0] ^ m.l[1]; - } else { - int i; + for (i = 0; i < 4; i++) { + uint32_t t = fn(&d); - for (i = 0; i < 4; i++) { - uint32_t t; + t += rol32(CR_ST_WORD(d, 0), 5) + CR_ST_WORD(n, 0) + + CR_ST_WORD(m, i); - switch (op) { - case 0: /* sha1c */ - t = cho(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - case 1: /* sha1p */ - t = par(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - case 2: /* sha1m */ - t = maj(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - default: - g_assert_not_reached(); - } - t += rol32(CR_ST_WORD(d, 0), 5) + CR_ST_WORD(n, 0) - + CR_ST_WORD(m, i); - - CR_ST_WORD(n, 0) = CR_ST_WORD(d, 3); - CR_ST_WORD(d, 3) = CR_ST_WORD(d, 2); - CR_ST_WORD(d, 2) = ror32(CR_ST_WORD(d, 1), 2); - CR_ST_WORD(d, 1) = CR_ST_WORD(d, 0); - CR_ST_WORD(d, 0) = t; - } + CR_ST_WORD(n, 0) = CR_ST_WORD(d, 3); + CR_ST_WORD(d, 3) = CR_ST_WORD(d, 2); + CR_ST_WORD(d, 2) = ror32(CR_ST_WORD(d, 1), 2); + CR_ST_WORD(d, 1) = CR_ST_WORD(d, 0); + CR_ST_WORD(d, 0) = t; } rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(rd, desc); +} + +static uint32_t do_sha1c(union CRYPTO_STATE *d) +{ + return cho(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1c)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1c); +} + +static uint32_t do_sha1p(union CRYPTO_STATE *d) +{ + return par(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1p)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1p); +} + +static uint32_t do_sha1m(union CRYPTO_STATE *d) +{ + return maj(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1m)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1m); } void HELPER(crypto_sha1h)(void *vd, void *vm, uint32_t desc) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SHA1C */ + genfn = gen_helper_crypto_sha1c; + feature = dc_isar_feature(aa64_sha1, s); + break; case 1: /* SHA1P */ + genfn = gen_helper_crypto_sha1p; + feature = dc_isar_feature(aa64_sha1, s); + break; case 2: /* SHA1M */ + genfn = gen_helper_crypto_sha1m; + feature = dc_isar_feature(aa64_sha1, s); + break; case 3: /* SHA1SU0 */ - genfn = NULL; + genfn = gen_helper_crypto_sha1su0; feature = dc_isar_feature(aa64_sha1, s); break; case 4: /* SHA256H */ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - if (genfn) { - gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); - } else { - TCGv_i32 tcg_opcode = tcg_const_i32(opcode); - TCGv_ptr tcg_rd_ptr = vec_full_reg_ptr(s, rd); - TCGv_ptr tcg_rn_ptr = vec_full_reg_ptr(s, rn); - TCGv_ptr tcg_rm_ptr = vec_full_reg_ptr(s, rm); - - gen_helper_crypto_sha1_3reg(tcg_rd_ptr, tcg_rn_ptr, - tcg_rm_ptr, tcg_opcode); - - tcg_temp_free_i32(tcg_opcode); - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); - } + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); } /* Crypto two-reg SHA diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a) DO_VQRDMLAH(VQRDMLAH, gen_gvec_sqrdmlah_qc) DO_VQRDMLAH(VQRDMLSH, gen_gvec_sqrdmlsh_qc) -static bool trans_SHA1_3s(DisasContext *s, arg_SHA1_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - TCGv_i32 tmp; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha1, s)) { - return false; +#define DO_SHA1(NAME, FUNC) \ + WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ + static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \ + { \ + if (!dc_isar_feature(aa32_sha1, s)) { \ + return false; \ + } \ + return do_3same(s, a, gen_##NAME##_3s); \ } - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - tmp = tcg_const_i32(a->optype); - gen_helper_crypto_sha1_3reg(ptr1, ptr2, ptr3, tmp); - tcg_temp_free_i32(tmp); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} +DO_SHA1(SHA1C, gen_helper_crypto_sha1c) +DO_SHA1(SHA1P, gen_helper_crypto_sha1p) +DO_SHA1(SHA1M, gen_helper_crypto_sha1m) +DO_SHA1(SHA1SU0, gen_helper_crypto_sha1su0) #define DO_SHA2(NAME, FUNC) \ WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than passing an opcode to a helper, fully decode the operation at translate time. Use clear_tail_16 to zap the balance of the SVE register with the AdvSIMD write. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 ++++- target/arm/crypto_helper.c | 24 ++++++++++++++++++------ target/arm/translate-a64.c | 21 +++++---------------- 3 files changed, 27 insertions(+), 23 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) -DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt1a, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt1b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt2a, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt2b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm3partw2, TCG_CALL_NO_RWG, diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm, uint32_t desc) clear_tail_16(vd, desc); } -void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, - uint32_t opcode) +static inline void QEMU_ALWAYS_INLINE +crypto_sm3tt(uint64_t *rd, uint64_t *rn, uint64_t *rm, + uint32_t desc, uint32_t opcode) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t imm2 = simd_data(desc); uint32_t t; assert(imm2 < 4); @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, /* SM3TT2B */ t = cho(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); } else { - g_assert_not_reached(); + qemu_build_not_reached(); } t += CR_ST_WORD(d, 0) + CR_ST_WORD(m, imm2); @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(rd, desc); } +#define DO_SM3TT(NAME, OPCODE) \ + void HELPER(NAME)(void *vd, void *vn, void *vm, uint32_t desc) \ + { crypto_sm3tt(vd, vn, vm, desc, OPCODE); } + +DO_SM3TT(crypto_sm3tt1a, 0) +DO_SM3TT(crypto_sm3tt1b, 1) +DO_SM3TT(crypto_sm3tt2a, 2) +DO_SM3TT(crypto_sm3tt2b, 3) + +#undef DO_SM3TT + static uint8_t const sm4_sbox[] = { 0xd6, 0x90, 0xe9, 0xfe, 0xcc, 0xe1, 0x3d, 0xb7, 0x16, 0xb6, 0x14, 0xc2, 0x28, 0xfb, 0x2c, 0x05, diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_xar(DisasContext *s, uint32_t insn) */ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) { + static gen_helper_gvec_3 * const fns[4] = { + gen_helper_crypto_sm3tt1a, gen_helper_crypto_sm3tt1b, + gen_helper_crypto_sm3tt2a, gen_helper_crypto_sm3tt2b, + }; int opcode = extract32(insn, 10, 2); int imm2 = extract32(insn, 12, 2); int rm = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; - TCGv_i32 tcg_imm2, tcg_opcode; if (!dc_isar_feature(aa64_sm3, s)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) return; } - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - tcg_imm2 = tcg_const_i32(imm2); - tcg_opcode = tcg_const_i32(opcode); - - gen_helper_crypto_sm3tt(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_imm2, - tcg_opcode); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); - tcg_temp_free_i32(tcg_imm2); - tcg_temp_free_i32(tcg_opcode); + gen_gvec_op3_ool(s, true, rd, rn, rm, imm2, fns[opcode]); } /* C3.6 Data processing - SIMD, inc Crypto -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The ADC region size is 256B, split as: - [0x00 - 0x4f] defined - [0x50 - 0xff] reserved All registers are 32-bit (thus when the datasheet mentions the last defined register is 0x4c, it means its address range is 0x4c .. 0x4f. This model implementation is also 32-bit. Set MemoryRegionOps 'impl' fields. See: 'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map". Reported-by: Seth Kintigh <skintigh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200603055915.17678-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/adc/stm32f2xx_adc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/adc/stm32f2xx_adc.c b/hw/adc/stm32f2xx_adc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/adc/stm32f2xx_adc.c +++ b/hw/adc/stm32f2xx_adc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps stm32f2xx_adc_ops = { .read = stm32f2xx_adc_read, .write = stm32f2xx_adc_write, .endianness = DEVICE_NATIVE_ENDIAN, + .impl.min_access_size = 4, + .impl.max_access_size = 4, }; static const VMStateDescription vmstate_stm32f2xx_adc = { @@ -XXX,XX +XXX,XX @@ static void stm32f2xx_adc_init(Object *obj) sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); memory_region_init_io(&s->mmio, obj, &stm32f2xx_adc_ops, s, - TYPE_STM32F2XX_ADC, 0xFF); + TYPE_STM32F2XX_ADC, 0x100); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); } -- 2.20.1 From: Thomas Huth <thuth@redhat.com> As described by Edgar here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html we can use the Ubuntu kernel for testing the xlnx-versal-virt machine. So let's add a boot test for this now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200525141237.15243-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(LinuxKernelTest): console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + def test_aarch64_xlnx_versal_virt(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:xlnx-versal-virt + :avocado: tags=device:pl011 + :avocado: tags=device:arm_gicv3 + """ + kernel_url = ('http://ports.ubuntu.com/ubuntu-ports/dists/' + 'bionic-updates/main/installer-arm64/current/images/' + 'netboot/ubuntu-installer/arm64/linux') + kernel_hash = '5bfc54cf7ed8157d93f6e5b0241e727b6dc22c50' + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) + + initrd_url = ('http://ports.ubuntu.com/ubuntu-ports/dists/' + 'bionic-updates/main/installer-arm64/current/images/' + 'netboot/ubuntu-installer/arm64/initrd.gz') + initrd_hash = 'd385d3e88d53e2004c5d43cbe668b458a094f772' + initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash) + + self.vm.set_console() + self.vm.add_args('-m', '2G', + '-kernel', kernel_path, + '-initrd', initrd_path) + self.vm.launch() + self.wait_for_console_pattern('Checked W+X mappings: passed') + def test_arm_virt(self): """ :avocado: tags=arch:arm -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200602135050.593692-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 85 ++++++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 86 insertions(+) create mode 100644 docs/system/arm/aspeed.rst diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ +Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``) +================================================================== + +The QEMU Aspeed machines model BMCs of various OpenPOWER systems and +Aspeed evaluation boards. They are based on different releases of the +Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the +AST2500 with an ARM1176JZS CPU (800MHz) and more recently the AST2600 +with dual cores ARM Cortex A7 CPUs (1.2GHz). + +The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C, +etc. + +AST2400 SoC based machines : + +- ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC + +AST2500 SoC based machines : + +- ``ast2500-evb`` Aspeed AST2500 Evaluation board +- ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC +- ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC +- ``sonorapass-bmc`` OCP SonoraPass BMC +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 + +AST2600 SoC based machines : + +- ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex A7) +- ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC + +Supported devices +----------------- + + * SMP (for the AST2600 Cortex-A7) + * Interrupt Controller (VIC) + * Timer Controller + * RTC Controller + * I2C Controller + * System Control Unit (SCU) + * SRAM mapping + * X-DMA Controller (basic interface) + * Static Memory Controller (SMC or FMC) - Only SPI Flash support + * SPI Memory Controller + * USB 2.0 Controller + * SD/MMC storage controllers + * SDRAM controller (dummy interface for basic settings and training) + * Watchdog Controller + * GPIO Controller (Master only) + * UART + * Ethernet controllers + + +Missing devices +--------------- + + * Coprocessor support + * ADC (out of tree implementation) + * PWM and Fan Controller + * LPC Bus Controller + * Slave GPIO Controller + * Super I/O Controller + * Hash/Crypto Engine + * PCI-Express 1 Controller + * Graphic Display Controller + * PECI Controller + * MCTP Controller + * Mailbox Controller + * Virtual UART + * eSPI Controller + * I3C Controller + +Boot options +------------ + +The Aspeed machines can be started using the -kernel option to load a +Linux kernel or from a firmare image which can be downloaded from the +OpenPOWER jenkins : + + https://openpower.xyz/ + +The image should be attached as an MTD drive. Run : + +.. code-block:: bash + + $ qemu-system-arm -M romulus-bmc -nic user \ + -drive file=flash-romulus,format=raw,if=mtd -nographic diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/realview arm/versatile arm/vexpress + arm/aspeed arm/musicpal arm/nseries arm/orangepi -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add BCM2835 SOC MPHI (Message-based Parallel Host Interface) emulation. It is very basic, only providing the FIQ interrupt needed to allow the dwc-otg USB host controller driver in the Raspbian kernel to function. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200520235349.21215-2-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 2 + include/hw/misc/bcm2835_mphi.h | 44 ++++++ hw/arm/bcm2835_peripherals.c | 17 +++ hw/misc/bcm2835_mphi.c | 191 +++++++++++++++++++++++++++ hw/misc/Makefile.objs | 1 + 5 files changed, 255 insertions(+) create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 hw/misc/bcm2835_mphi.c diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_property.h" #include "hw/misc/bcm2835_rng.h" #include "hw/misc/bcm2835_mbox.h" +#include "hw/misc/bcm2835_mphi.h" #include "hw/misc/bcm2835_thermal.h" #include "hw/sd/sdhci.h" #include "hw/sd/bcm2835_sdhost.h" @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { qemu_irq irq, fiq; BCM2835SystemTimerState systmr; + BCM2835MphiState mphi; UnimplementedDeviceState armtmr; UnimplementedDeviceState cprman; UnimplementedDeviceState a2w; diff --git a/include/hw/misc/bcm2835_mphi.h b/include/hw/misc/bcm2835_mphi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_mphi.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 SOC MPHI state definitions + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HW_MISC_BCM2835_MPHI_H +#define HW_MISC_BCM2835_MPHI_H + +#include "hw/irq.h" +#include "hw/sysbus.h" + +#define MPHI_MMIO_SIZE 0x1000 + +typedef struct BCM2835MphiState BCM2835MphiState; + +struct BCM2835MphiState { + SysBusDevice parent_obj; + qemu_irq irq; + MemoryRegion iomem; + + uint32_t outdda; + uint32_t outddb; + uint32_t ctrl; + uint32_t intstat; + uint32_t swirq; +}; + +#define TYPE_BCM2835_MPHI "bcm2835-mphi" + +#define BCM2835_MPHI(obj) \ + OBJECT_CHECK(BCM2835MphiState, (obj), TYPE_BCM2835_MPHI) + +#endif diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) OBJECT(&s->sdhci.sdbus)); object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost", OBJECT(&s->sdhost.sdbus)); + + /* Mphi */ + sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi), + TYPE_BCM2835_MPHI); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus"); + /* Mphi */ + object_property_set_bool(OBJECT(&s->mphi), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, MPHI_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mphi), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mphi), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_HOSTPORT)); + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); diff --git a/hw/misc/bcm2835_mphi.c b/hw/misc/bcm2835_mphi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/bcm2835_mphi.c @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 SOC MPHI emulation + * + * Very basic emulation, only providing the FIQ interrupt needed to + * allow the dwc-otg USB host controller driver in the Raspbian kernel + * to function. + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/misc/bcm2835_mphi.h" +#include "migration/vmstate.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" + +static inline void mphi_raise_irq(BCM2835MphiState *s) +{ + qemu_set_irq(s->irq, 1); +} + +static inline void mphi_lower_irq(BCM2835MphiState *s) +{ + qemu_set_irq(s->irq, 0); +} + +static uint64_t mphi_reg_read(void *ptr, hwaddr addr, unsigned size) +{ + BCM2835MphiState *s = ptr; + uint32_t val = 0; + + switch (addr) { + case 0x28: /* outdda */ + val = s->outdda; + break; + case 0x2c: /* outddb */ + val = s->outddb; + break; + case 0x4c: /* ctrl */ + val = s->ctrl; + val |= 1 << 17; + break; + case 0x50: /* intstat */ + val = s->intstat; + break; + case 0x1f0: /* swirq_set */ + val = s->swirq; + break; + case 0x1f4: /* swirq_clr */ + val = s->swirq; + break; + default: + qemu_log_mask(LOG_UNIMP, "read from unknown register"); + break; + } + + return val; +} + +static void mphi_reg_write(void *ptr, hwaddr addr, uint64_t val, unsigned size) +{ + BCM2835MphiState *s = ptr; + int do_irq = 0; + + switch (addr) { + case 0x28: /* outdda */ + s->outdda = val; + break; + case 0x2c: /* outddb */ + s->outddb = val; + if (val & (1 << 29)) { + do_irq = 1; + } + break; + case 0x4c: /* ctrl */ + s->ctrl = val; + if (val & (1 << 16)) { + do_irq = -1; + } + break; + case 0x50: /* intstat */ + s->intstat = val; + if (val & ((1 << 16) | (1 << 29))) { + do_irq = -1; + } + break; + case 0x1f0: /* swirq_set */ + s->swirq |= val; + do_irq = 1; + break; + case 0x1f4: /* swirq_clr */ + s->swirq &= ~val; + do_irq = -1; + break; + default: + qemu_log_mask(LOG_UNIMP, "write to unknown register"); + return; + } + + if (do_irq > 0) { + mphi_raise_irq(s); + } else if (do_irq < 0) { + mphi_lower_irq(s); + } +} + +static const MemoryRegionOps mphi_mmio_ops = { + .read = mphi_reg_read, + .write = mphi_reg_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mphi_reset(DeviceState *dev) +{ + BCM2835MphiState *s = BCM2835_MPHI(dev); + + s->outdda = 0; + s->outddb = 0; + s->ctrl = 0; + s->intstat = 0; + s->swirq = 0; +} + +static void mphi_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + BCM2835MphiState *s = BCM2835_MPHI(dev); + + sysbus_init_irq(sbd, &s->irq); +} + +static void mphi_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + BCM2835MphiState *s = BCM2835_MPHI(obj); + + memory_region_init_io(&s->iomem, obj, &mphi_mmio_ops, s, "mphi", MPHI_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +const VMStateDescription vmstate_mphi_state = { + .name = "mphi", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(outdda, BCM2835MphiState), + VMSTATE_UINT32(outddb, BCM2835MphiState), + VMSTATE_UINT32(ctrl, BCM2835MphiState), + VMSTATE_UINT32(intstat, BCM2835MphiState), + VMSTATE_UINT32(swirq, BCM2835MphiState), + VMSTATE_END_OF_LIST() + } +}; + +static void mphi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = mphi_realize; + dc->reset = mphi_reset; + dc->vmsd = &vmstate_mphi_state; +} + +static const TypeInfo bcm2835_mphi_type_info = { + .name = TYPE_BCM2835_MPHI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835MphiState), + .instance_init = mphi_init, + .class_init = mphi_class_init, +}; + +static void bcm2835_mphi_register_types(void) +{ + type_register_static(&bcm2835_mphi_type_info); +} + +type_init(bcm2835_mphi_register_types) diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_OMAP) += omap_l4.o common-obj-$(CONFIG_OMAP) += omap_sdrc.o common-obj-$(CONFIG_OMAP) += omap_tap.o common-obj-$(CONFIG_RASPI) += bcm2835_mbox.o +common-obj-$(CONFIG_RASPI) += bcm2835_mphi.o common-obj-$(CONFIG_RASPI) += bcm2835_property.o common-obj-$(CONFIG_RASPI) += bcm2835_rng.o common-obj-$(CONFIG_RASPI) += bcm2835_thermal.o -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Import the dwc-hsotg (dwc2) register definitions file from the Linux kernel. This is a copy of drivers/usb/dwc2/hw.h from the mainline Linux kernel, the only changes being to the header, and two instances of 'u32' changed to 'uint32_t' to allow it to compile. Checkpatch throws a boatload of errors due to the tab indentation, but I would rather import it as-is than reformat it. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-3-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/usb/dwc2-regs.h | 899 +++++++++++++++++++++++++++++++++++++ 1 file changed, 899 insertions(+) create mode 100644 include/hw/usb/dwc2-regs.h diff --git a/include/hw/usb/dwc2-regs.h b/include/hw/usb/dwc2-regs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/dwc2-regs.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Imported from the Linux kernel file drivers/usb/dwc2/hw.h, commit + * a89bae709b3492b478480a2c9734e7e9393b279c ("usb: dwc2: Move + * UTMI_PHY_DATA defines closer") + * + * hw.h - DesignWare HS OTG Controller hardware definitions + * + * Copyright 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_HW_H__ +#define __DWC2_HW_H__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_CHIRPEN BIT(27) +#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22) +#define GOTGCTL_MULT_VALID_BC_SHIFT 22 +#define GOTGCTL_OTGVER BIT(20) +#define GOTGCTL_BSESVLD BIT(19) +#define GOTGCTL_ASESVLD BIT(18) +#define GOTGCTL_DBNC_SHORT BIT(17) +#define GOTGCTL_CONID_B BIT(16) +#define GOTGCTL_DBNCE_FLTR_BYPASS BIT(15) +#define GOTGCTL_DEVHNPEN BIT(11) +#define GOTGCTL_HSTSETHNPEN BIT(10) +#define GOTGCTL_HNPREQ BIT(9) +#define GOTGCTL_HSTNEGSCS BIT(8) +#define GOTGCTL_SESREQ BIT(1) +#define GOTGCTL_SESREQSCS BIT(0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DBNCE_DONE BIT(19) +#define GOTGINT_A_DEV_TOUT_CHG BIT(18) +#define GOTGINT_HST_NEG_DET BIT(17) +#define GOTGINT_HST_NEG_SUC_STS_CHNG BIT(9) +#define GOTGINT_SES_REQ_SUC_STS_CHNG BIT(8) +#define GOTGINT_SES_END_DET BIT(2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_AHB_SINGLE BIT(23) +#define GAHBCFG_NOTI_ALL_DMA_WRIT BIT(22) +#define GAHBCFG_REM_MEM_SUPP BIT(21) +#define GAHBCFG_P_TXF_EMP_LVL BIT(8) +#define GAHBCFG_NP_TXF_EMP_LVL BIT(7) +#define GAHBCFG_DMA_EN BIT(5) +#define GAHBCFG_HBSTLEN_MASK (0xf << 1) +#define GAHBCFG_HBSTLEN_SHIFT 1 +#define GAHBCFG_HBSTLEN_SINGLE 0 +#define GAHBCFG_HBSTLEN_INCR 1 +#define GAHBCFG_HBSTLEN_INCR4 3 +#define GAHBCFG_HBSTLEN_INCR8 5 +#define GAHBCFG_HBSTLEN_INCR16 7 +#define GAHBCFG_GLBL_INTR_EN BIT(0) +#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \ + GAHBCFG_NP_TXF_EMP_LVL | \ + GAHBCFG_DMA_EN | \ + GAHBCFG_GLBL_INTR_EN) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_FORCEDEVMODE BIT(30) +#define GUSBCFG_FORCEHOSTMODE BIT(29) +#define GUSBCFG_TXENDDELAY BIT(28) +#define GUSBCFG_ICTRAFFICPULLREMOVE BIT(27) +#define GUSBCFG_ICUSBCAP BIT(26) +#define GUSBCFG_ULPI_INT_PROT_DIS BIT(25) +#define GUSBCFG_INDICATORPASSTHROUGH BIT(24) +#define GUSBCFG_INDICATORCOMPLEMENT BIT(23) +#define GUSBCFG_TERMSELDLPULSE BIT(22) +#define GUSBCFG_ULPI_INT_VBUS_IND BIT(21) +#define GUSBCFG_ULPI_EXT_VBUS_DRV BIT(20) +#define GUSBCFG_ULPI_CLK_SUSP_M BIT(19) +#define GUSBCFG_ULPI_AUTO_RES BIT(18) +#define GUSBCFG_ULPI_FS_LS BIT(17) +#define GUSBCFG_OTG_UTMI_FS_SEL BIT(16) +#define GUSBCFG_PHY_LP_CLK_SEL BIT(15) +#define GUSBCFG_USBTRDTIM_MASK (0xf << 10) +#define GUSBCFG_USBTRDTIM_SHIFT 10 +#define GUSBCFG_HNPCAP BIT(9) +#define GUSBCFG_SRPCAP BIT(8) +#define GUSBCFG_DDRSEL BIT(7) +#define GUSBCFG_PHYSEL BIT(6) +#define GUSBCFG_FSINTF BIT(5) +#define GUSBCFG_ULPI_UTMI_SEL BIT(4) +#define GUSBCFG_PHYIF16 BIT(3) +#define GUSBCFG_PHYIF8 (0 << 3) +#define GUSBCFG_TOUTCAL_MASK (0x7 << 0) +#define GUSBCFG_TOUTCAL_SHIFT 0 +#define GUSBCFG_TOUTCAL_LIMIT 0x7 +#define GUSBCFG_TOUTCAL(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) +#define GRSTCTL_AHBIDLE BIT(31) +#define GRSTCTL_DMAREQ BIT(30) +#define GRSTCTL_TXFNUM_MASK (0x1f << 6) +#define GRSTCTL_TXFNUM_SHIFT 6 +#define GRSTCTL_TXFNUM_LIMIT 0x1f +#define GRSTCTL_TXFNUM(_x) ((_x) << 6) +#define GRSTCTL_TXFFLSH BIT(5) +#define GRSTCTL_RXFFLSH BIT(4) +#define GRSTCTL_IN_TKNQ_FLSH BIT(3) +#define GRSTCTL_FRMCNTRRST BIT(2) +#define GRSTCTL_HSFTRST BIT(1) +#define GRSTCTL_CSFTRST BIT(0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) +#define GINTSTS_WKUPINT BIT(31) +#define GINTSTS_SESSREQINT BIT(30) +#define GINTSTS_DISCONNINT BIT(29) +#define GINTSTS_CONIDSTSCHNG BIT(28) +#define GINTSTS_LPMTRANRCVD BIT(27) +#define GINTSTS_PTXFEMP BIT(26) +#define GINTSTS_HCHINT BIT(25) +#define GINTSTS_PRTINT BIT(24) +#define GINTSTS_RESETDET BIT(23) +#define GINTSTS_FET_SUSP BIT(22) +#define GINTSTS_INCOMPL_IP BIT(21) +#define GINTSTS_INCOMPL_SOOUT BIT(21) +#define GINTSTS_INCOMPL_SOIN BIT(20) +#define GINTSTS_OEPINT BIT(19) +#define GINTSTS_IEPINT BIT(18) +#define GINTSTS_EPMIS BIT(17) +#define GINTSTS_RESTOREDONE BIT(16) +#define GINTSTS_EOPF BIT(15) +#define GINTSTS_ISOUTDROP BIT(14) +#define GINTSTS_ENUMDONE BIT(13) +#define GINTSTS_USBRST BIT(12) +#define GINTSTS_USBSUSP BIT(11) +#define GINTSTS_ERLYSUSP BIT(10) +#define GINTSTS_I2CINT BIT(9) +#define GINTSTS_ULPI_CK_INT BIT(8) +#define GINTSTS_GOUTNAKEFF BIT(7) +#define GINTSTS_GINNAKEFF BIT(6) +#define GINTSTS_NPTXFEMP BIT(5) +#define GINTSTS_RXFLVL BIT(4) +#define GINTSTS_SOF BIT(3) +#define GINTSTS_OTGINT BIT(2) +#define GINTSTS_MODEMIS BIT(1) +#define GINTSTS_CURMODE_HOST BIT(0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT 25 +#define GRXSTS_PKTSTS_MASK (0xf << 17) +#define GRXSTS_PKTSTS_SHIFT 17 +#define GRXSTS_PKTSTS_GLOBALOUTNAK 1 +#define GRXSTS_PKTSTS_OUTRX 2 +#define GRXSTS_PKTSTS_HCHIN 2 +#define GRXSTS_PKTSTS_OUTDONE 3 +#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3 +#define GRXSTS_PKTSTS_SETUPDONE 4 +#define GRXSTS_PKTSTS_DATATOGGLEERR 5 +#define GRXSTS_PKTSTS_SETUPRX 6 +#define GRXSTS_PKTSTS_HCHHALTED 7 +#define GRXSTS_HCHNUM_MASK (0xf << 0) +#define GRXSTS_HCHNUM_SHIFT 0 +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT 15 +#define GRXSTS_BYTECNT_MASK (0x7ff << 4) +#define GRXSTS_BYTECNT_SHIFT 4 +#define GRXSTS_EPNUM_MASK (0xf << 0) +#define GRXSTS_EPNUM_SHIFT 0 + +#define GRXFSIZ HSOTG_REG(0x024) +#define GRXFSIZ_DEPTH_MASK (0xffff << 0) +#define GRXFSIZ_DEPTH_SHIFT 0 + +#define GNPTXFSIZ HSOTG_REG(0x028) +/* Use FIFOSIZE_* constants to access this register */ + +#define GNPTXSTS HSOTG_REG(0x02C) +#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24) +#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16) +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0 +#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff) + +#define GI2CCTL HSOTG_REG(0x0030) +#define GI2CCTL_BSYDNE BIT(31) +#define GI2CCTL_RW BIT(30) +#define GI2CCTL_I2CDATSE0 BIT(28) +#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26) +#define GI2CCTL_I2CDEVADDR_SHIFT 26 +#define GI2CCTL_I2CSUSPCTL BIT(25) +#define GI2CCTL_ACK BIT(24) +#define GI2CCTL_I2CEN BIT(23) +#define GI2CCTL_ADDR_MASK (0x7f << 16) +#define GI2CCTL_ADDR_SHIFT 16 +#define GI2CCTL_REGADDR_MASK (0xff << 8) +#define GI2CCTL_REGADDR_SHIFT 8 +#define GI2CCTL_RWDATA_MASK (0xff << 0) +#define GI2CCTL_RWDATA_SHIFT 0 + +#define GPVNDCTL HSOTG_REG(0x0034) +#define GGPIO HSOTG_REG(0x0038) +#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16) + +#define GUID HSOTG_REG(0x003c) +#define GSNPSID HSOTG_REG(0x0040) +#define GHWCFG1 HSOTG_REG(0x0044) +#define GSNPSID_ID_MASK GENMASK(31, 16) + +#define GHWCFG2 HSOTG_REG(0x0048) +#define GHWCFG2_OTG_ENABLE_IC_USB BIT(31) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26 +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24) +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24 +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22) +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22 +#define GHWCFG2_MULTI_PROC_INT BIT(20) +#define GHWCFG2_DYNAMIC_FIFO BIT(19) +#define GHWCFG2_PERIO_EP_SUPPORTED BIT(18) +#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14) +#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14 +#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10) +#define GHWCFG2_NUM_DEV_EP_SHIFT 10 +#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHIFT 8 +#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_FS_PHY_TYPE_DEDICATED 1 +#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI 2 +#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI 3 +#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6) +#define GHWCFG2_HS_PHY_TYPE_SHIFT 6 +#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_HS_PHY_TYPE_UTMI 1 +#define GHWCFG2_HS_PHY_TYPE_ULPI 2 +#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 +#define GHWCFG2_POINT2POINT BIT(5) +#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3) +#define GHWCFG2_ARCHITECTURE_SHIFT 3 +#define GHWCFG2_SLAVE_ONLY_ARCH 0 +#define GHWCFG2_EXT_DMA_ARCH 1 +#define GHWCFG2_INT_DMA_ARCH 2 +#define GHWCFG2_OP_MODE_MASK (0x7 << 0) +#define GHWCFG2_OP_MODE_SHIFT 0 +#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE 0 +#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE 1 +#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE 2 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 +#define GHWCFG2_OP_MODE_UNDEFINED 7 + +#define GHWCFG3 HSOTG_REG(0x004c) +#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16) +#define GHWCFG3_DFIFO_DEPTH_SHIFT 16 +#define GHWCFG3_OTG_LPM_EN BIT(15) +#define GHWCFG3_BC_SUPPORT BIT(14) +#define GHWCFG3_OTG_ENABLE_HSIC BIT(13) +#define GHWCFG3_ADP_SUPP BIT(12) +#define GHWCFG3_SYNCH_RESET_TYPE BIT(11) +#define GHWCFG3_OPTIONAL_FEATURES BIT(10) +#define GHWCFG3_VENDOR_CTRL_IF BIT(9) +#define GHWCFG3_I2C BIT(8) +#define GHWCFG3_OTG_FUNC BIT(7) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4 +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0) +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0 + +#define GHWCFG4 HSOTG_REG(0x0050) +#define GHWCFG4_DESC_DMA_DYN BIT(31) +#define GHWCFG4_DESC_DMA BIT(30) +#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26) +#define GHWCFG4_NUM_IN_EPS_SHIFT 26 +#define GHWCFG4_DED_FIFO_EN BIT(25) +#define GHWCFG4_DED_FIFO_SHIFT 25 +#define GHWCFG4_SESSION_END_FILT_EN BIT(24) +#define GHWCFG4_B_VALID_FILT_EN BIT(23) +#define GHWCFG4_A_VALID_FILT_EN BIT(22) +#define GHWCFG4_VBUS_VALID_FILT_EN BIT(21) +#define GHWCFG4_IDDIG_FILT_EN BIT(20) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2 +#define GHWCFG4_ACG_SUPPORTED BIT(12) +#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11) +#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED BIT(10) +#define GHWCFG4_XHIBER BIT(7) +#define GHWCFG4_HIBER BIT(6) +#define GHWCFG4_MIN_AHB_FREQ BIT(5) +#define GHWCFG4_POWER_OPTIMIZ BIT(4) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0 + +#define GLPMCFG HSOTG_REG(0x0054) +#define GLPMCFG_INVSELHSIC BIT(31) +#define GLPMCFG_HSICCON BIT(30) +#define GLPMCFG_RSTRSLPSTS BIT(29) +#define GLPMCFG_ENBESL BIT(28) +#define GLPMCFG_LPM_RETRYCNT_STS_MASK (0x7 << 25) +#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT 25 +#define GLPMCFG_SNDLPM BIT(24) +#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21) +#define GLPMCFG_RETRY_CNT_SHIFT 21 +#define GLPMCFG_LPM_REJECT_CTRL_CONTROL BIT(21) +#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) +#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17) +#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17 +#define GLPMCFG_L1RESUMEOK BIT(16) +#define GLPMCFG_SLPSTS BIT(15) +#define GLPMCFG_COREL1RES_MASK (0x3 << 13) +#define GLPMCFG_COREL1RES_SHIFT 13 +#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8) +#define GLPMCFG_HIRD_THRES_SHIFT 8 +#define GLPMCFG_HIRD_THRES_EN (0x10 << 8) +#define GLPMCFG_ENBLSLPM BIT(7) +#define GLPMCFG_BREMOTEWAKE BIT(6) +#define GLPMCFG_HIRD_MASK (0xf << 2) +#define GLPMCFG_HIRD_SHIFT 2 +#define GLPMCFG_APPL1RES BIT(1) +#define GLPMCFG_LPMCAP BIT(0) + +#define GPWRDN HSOTG_REG(0x0058) +#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24) +#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24 +#define GPWRDN_ADP_INT BIT(23) +#define GPWRDN_BSESSVLD BIT(22) +#define GPWRDN_IDSTS BIT(21) +#define GPWRDN_LINESTATE_MASK (0x3 << 19) +#define GPWRDN_LINESTATE_SHIFT 19 +#define GPWRDN_STS_CHGINT_MSK BIT(18) +#define GPWRDN_STS_CHGINT BIT(17) +#define GPWRDN_SRP_DET_MSK BIT(16) +#define GPWRDN_SRP_DET BIT(15) +#define GPWRDN_CONNECT_DET_MSK BIT(14) +#define GPWRDN_CONNECT_DET BIT(13) +#define GPWRDN_DISCONN_DET_MSK BIT(12) +#define GPWRDN_DISCONN_DET BIT(11) +#define GPWRDN_RST_DET_MSK BIT(10) +#define GPWRDN_RST_DET BIT(9) +#define GPWRDN_LNSTSCHG_MSK BIT(8) +#define GPWRDN_LNSTSCHG BIT(7) +#define GPWRDN_DIS_VBUS BIT(6) +#define GPWRDN_PWRDNSWTCH BIT(5) +#define GPWRDN_PWRDNRSTN BIT(4) +#define GPWRDN_PWRDNCLMP BIT(3) +#define GPWRDN_RESTORE BIT(2) +#define GPWRDN_PMUACTV BIT(1) +#define GPWRDN_PMUINTSEL BIT(0) + +#define GDFIFOCFG HSOTG_REG(0x005c) +#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16) +#define GDFIFOCFG_EPINFOBASE_SHIFT 16 +#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0) +#define GDFIFOCFG_GDFIFOCFG_SHIFT 0 + +#define ADPCTL HSOTG_REG(0x0060) +#define ADPCTL_AR_MASK (0x3 << 27) +#define ADPCTL_AR_SHIFT 27 +#define ADPCTL_ADP_TMOUT_INT_MSK BIT(26) +#define ADPCTL_ADP_SNS_INT_MSK BIT(25) +#define ADPCTL_ADP_PRB_INT_MSK BIT(24) +#define ADPCTL_ADP_TMOUT_INT BIT(23) +#define ADPCTL_ADP_SNS_INT BIT(22) +#define ADPCTL_ADP_PRB_INT BIT(21) +#define ADPCTL_ADPENA BIT(20) +#define ADPCTL_ADPRES BIT(19) +#define ADPCTL_ENASNS BIT(18) +#define ADPCTL_ENAPRB BIT(17) +#define ADPCTL_RTIM_MASK (0x7ff << 6) +#define ADPCTL_RTIM_SHIFT 6 +#define ADPCTL_PRB_PER_MASK (0x3 << 4) +#define ADPCTL_PRB_PER_SHIFT 4 +#define ADPCTL_PRB_DELTA_MASK (0x3 << 2) +#define ADPCTL_PRB_DELTA_SHIFT 2 +#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0) +#define ADPCTL_PRB_DSCHRG_SHIFT 0 + +#define GREFCLK HSOTG_REG(0x0064) +#define GREFCLK_REFCLKPER_MASK (0x1ffff << 15) +#define GREFCLK_REFCLKPER_SHIFT 15 +#define GREFCLK_REF_CLK_MODE BIT(14) +#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK (0x3ff) +#define GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT 0 + +#define GINTMSK2 HSOTG_REG(0x0068) +#define GINTMSK2_WKUP_ALERT_INT_MSK BIT(0) + +#define GINTSTS2 HSOTG_REG(0x006c) +#define GINTSTS2_WKUP_ALERT_INT BIT(0) + +#define HPTXFSIZ HSOTG_REG(0x100) +/* Use FIFOSIZE_* constants to access this register */ + +#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) +/* Use FIFOSIZE_* constants to access this register */ + +/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */ +#define FIFOSIZE_DEPTH_MASK (0xffff << 16) +#define FIFOSIZE_DEPTH_SHIFT 16 +#define FIFOSIZE_STARTADDR_MASK (0xffff << 0) +#define FIFOSIZE_STARTADDR_SHIFT 0 +#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff) + +/* Device mode registers */ + +#define DCFG HSOTG_REG(0x800) +#define DCFG_DESCDMA_EN BIT(23) +#define DCFG_EPMISCNT_MASK (0x1f << 18) +#define DCFG_EPMISCNT_SHIFT 18 +#define DCFG_EPMISCNT_LIMIT 0x1f +#define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_IPG_ISOC_SUPPORDED BIT(17) +#define DCFG_PERFRINT_MASK (0x3 << 11) +#define DCFG_PERFRINT_SHIFT 11 +#define DCFG_PERFRINT_LIMIT 0x3 +#define DCFG_PERFRINT(_x) ((_x) << 11) +#define DCFG_DEVADDR_MASK (0x7f << 4) +#define DCFG_DEVADDR_SHIFT 4 +#define DCFG_DEVADDR_LIMIT 0x7f +#define DCFG_DEVADDR(_x) ((_x) << 4) +#define DCFG_NZ_STS_OUT_HSHK BIT(2) +#define DCFG_DEVSPD_MASK (0x3 << 0) +#define DCFG_DEVSPD_SHIFT 0 +#define DCFG_DEVSPD_HS 0 +#define DCFG_DEVSPD_FS 1 +#define DCFG_DEVSPD_LS 2 +#define DCFG_DEVSPD_FS48 3 + +#define DCTL HSOTG_REG(0x804) +#define DCTL_SERVICE_INTERVAL_SUPPORTED BIT(19) +#define DCTL_PWRONPRGDONE BIT(11) +#define DCTL_CGOUTNAK BIT(10) +#define DCTL_SGOUTNAK BIT(9) +#define DCTL_CGNPINNAK BIT(8) +#define DCTL_SGNPINNAK BIT(7) +#define DCTL_TSTCTL_MASK (0x7 << 4) +#define DCTL_TSTCTL_SHIFT 4 +#define DCTL_GOUTNAKSTS BIT(3) +#define DCTL_GNPINNAKSTS BIT(2) +#define DCTL_SFTDISCON BIT(1) +#define DCTL_RMTWKUPSIG BIT(0) + +#define DSTS HSOTG_REG(0x808) +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT 8 +#define DSTS_SOFFN_LIMIT 0x3fff +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ERRATICERR BIT(3) +#define DSTS_ENUMSPD_MASK (0x3 << 1) +#define DSTS_ENUMSPD_SHIFT 1 +#define DSTS_ENUMSPD_HS 0 +#define DSTS_ENUMSPD_FS 1 +#define DSTS_ENUMSPD_LS 2 +#define DSTS_ENUMSPD_FS48 3 +#define DSTS_SUSPSTS BIT(0) + +#define DIEPMSK HSOTG_REG(0x810) +#define DIEPMSK_NAKMSK BIT(13) +#define DIEPMSK_BNAININTRMSK BIT(9) +#define DIEPMSK_TXFIFOUNDRNMSK BIT(8) +#define DIEPMSK_TXFIFOEMPTY BIT(7) +#define DIEPMSK_INEPNAKEFFMSK BIT(6) +#define DIEPMSK_INTKNEPMISMSK BIT(5) +#define DIEPMSK_INTKNTXFEMPMSK BIT(4) +#define DIEPMSK_TIMEOUTMSK BIT(3) +#define DIEPMSK_AHBERRMSK BIT(2) +#define DIEPMSK_EPDISBLDMSK BIT(1) +#define DIEPMSK_XFERCOMPLMSK BIT(0) + +#define DOEPMSK HSOTG_REG(0x814) +#define DOEPMSK_BNAMSK BIT(9) +#define DOEPMSK_BACK2BACKSETUP BIT(6) +#define DOEPMSK_STSPHSERCVDMSK BIT(5) +#define DOEPMSK_OUTTKNEPDISMSK BIT(4) +#define DOEPMSK_SETUPMSK BIT(3) +#define DOEPMSK_AHBERRMSK BIT(2) +#define DOEPMSK_EPDISBLDMSK BIT(1) +#define DOEPMSK_XFERCOMPLMSK BIT(0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) +#define DAINT_OUTEP_SHIFT 16 +#define DAINT_OUTEP(_x) (1 << ((_x) + 16)) +#define DAINT_INEP(_x) (1 << (_x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) +#define DIEPEMPMSK HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) + +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting different for EP0 + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT 0 +#define D0EPCTL_MPS_64 0 +#define D0EPCTL_MPS_32 1 +#define D0EPCTL_MPS_16 2 +#define D0EPCTL_MPS_8 3 + +#define DXEPCTL_EPENA BIT(31) +#define DXEPCTL_EPDIS BIT(30) +#define DXEPCTL_SETD1PID BIT(29) +#define DXEPCTL_SETODDFR BIT(29) +#define DXEPCTL_SETD0PID BIT(28) +#define DXEPCTL_SETEVENFR BIT(28) +#define DXEPCTL_SNAK BIT(27) +#define DXEPCTL_CNAK BIT(26) +#define DXEPCTL_TXFNUM_MASK (0xf << 22) +#define DXEPCTL_TXFNUM_SHIFT 22 +#define DXEPCTL_TXFNUM_LIMIT 0xf +#define DXEPCTL_TXFNUM(_x) ((_x) << 22) +#define DXEPCTL_STALL BIT(21) +#define DXEPCTL_SNP BIT(20) +#define DXEPCTL_EPTYPE_MASK (0x3 << 18) +#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18) +#define DXEPCTL_EPTYPE_ISO (0x1 << 18) +#define DXEPCTL_EPTYPE_BULK (0x2 << 18) +#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18) + +#define DXEPCTL_NAKSTS BIT(17) +#define DXEPCTL_DPID BIT(16) +#define DXEPCTL_EOFRNUM BIT(16) +#define DXEPCTL_USBACTEP BIT(15) +#define DXEPCTL_NEXTEP_MASK (0xf << 11) +#define DXEPCTL_NEXTEP_SHIFT 11 +#define DXEPCTL_NEXTEP_LIMIT 0xf +#define DXEPCTL_NEXTEP(_x) ((_x) << 11) +#define DXEPCTL_MPS_MASK (0x7ff << 0) +#define DXEPCTL_MPS_SHIFT 0 +#define DXEPCTL_MPS_LIMIT 0x7ff +#define DXEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) +#define DXEPINT_SETUP_RCVD BIT(15) +#define DXEPINT_NYETINTRPT BIT(14) +#define DXEPINT_NAKINTRPT BIT(13) +#define DXEPINT_BBLEERRINTRPT BIT(12) +#define DXEPINT_PKTDRPSTS BIT(11) +#define DXEPINT_BNAINTR BIT(9) +#define DXEPINT_TXFIFOUNDRN BIT(8) +#define DXEPINT_OUTPKTERR BIT(8) +#define DXEPINT_TXFEMP BIT(7) +#define DXEPINT_INEPNAKEFF BIT(6) +#define DXEPINT_BACK2BACKSETUP BIT(6) +#define DXEPINT_INTKNEPMIS BIT(5) +#define DXEPINT_STSPHSERCVD BIT(5) +#define DXEPINT_INTKNTXFEMP BIT(4) +#define DXEPINT_OUTTKNEPDIS BIT(4) +#define DXEPINT_TIMEOUT BIT(3) +#define DXEPINT_SETUP BIT(3) +#define DXEPINT_AHBERR BIT(2) +#define DXEPINT_EPDISBLD BIT(1) +#define DXEPINT_XFERCOMPL BIT(0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) +#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19) +#define DIEPTSIZ0_PKTCNT_SHIFT 19 +#define DIEPTSIZ0_PKTCNT_LIMIT 0x3 +#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19) +#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DIEPTSIZ0_XFERSIZE_SHIFT 0 +#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f +#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCNT_SHIFT 29 +#define DOEPTSIZ0_SUPCNT_LIMIT 0x3 +#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29) +#define DOEPTSIZ0_PKTCNT BIT(19) +#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DOEPTSIZ0_XFERSIZE_SHIFT 0 + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) +#define DXEPTSIZ_MC_MASK (0x3 << 29) +#define DXEPTSIZ_MC_SHIFT 29 +#define DXEPTSIZ_MC_LIMIT 0x3 +#define DXEPTSIZ_MC(_x) ((_x) << 29) +#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19) +#define DXEPTSIZ_PKTCNT_SHIFT 19 +#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff +#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff) +#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19) +#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define DXEPTSIZ_XFERSIZE_SHIFT 0 +#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff +#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) + +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define PCGCTL HSOTG_REG(0x0e00) +#define PCGCTL_IF_DEV_MODE BIT(31) +#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29) +#define PCGCTL_P2HD_PRT_SPD_SHIFT 29 +#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27) +#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 +#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20) +#define PCGCTL_MAC_DEV_ADDR_SHIFT 20 +#define PCGCTL_MAX_TERMSEL BIT(19) +#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17) +#define PCGCTL_MAX_XCVRSELECT_SHIFT 17 +#define PCGCTL_PORT_POWER BIT(16) +#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14) +#define PCGCTL_PRT_CLK_SEL_SHIFT 14 +#define PCGCTL_ESS_REG_RESTORED BIT(13) +#define PCGCTL_EXTND_HIBER_SWITCH BIT(12) +#define PCGCTL_EXTND_HIBER_PWRCLMP BIT(11) +#define PCGCTL_ENBL_EXTND_HIBER BIT(10) +#define PCGCTL_RESTOREMODE BIT(9) +#define PCGCTL_RESETAFTSUSP BIT(8) +#define PCGCTL_DEEP_SLEEP BIT(7) +#define PCGCTL_PHY_IN_SLEEP BIT(6) +#define PCGCTL_ENBL_SLEEP_GATING BIT(5) +#define PCGCTL_RSTPDWNMODULE BIT(3) +#define PCGCTL_PWRCLMP BIT(2) +#define PCGCTL_GATEHCLK BIT(1) +#define PCGCTL_STOPPCLK BIT(0) + +#define PCGCCTL1 HSOTG_REG(0xe04) +#define PCGCCTL1_TIMER (0x3 << 1) +#define PCGCCTL1_GATEEN BIT(0) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +/* Host Mode Registers */ + +#define HCFG HSOTG_REG(0x0400) +#define HCFG_MODECHTIMEN BIT(31) +#define HCFG_PERSCHEDENA BIT(26) +#define HCFG_FRLISTEN_MASK (0x3 << 24) +#define HCFG_FRLISTEN_SHIFT 24 +#define HCFG_FRLISTEN_8 (0 << 24) +#define FRLISTEN_8_SIZE 8 +#define HCFG_FRLISTEN_16 BIT(24) +#define FRLISTEN_16_SIZE 16 +#define HCFG_FRLISTEN_32 (2 << 24) +#define FRLISTEN_32_SIZE 32 +#define HCFG_FRLISTEN_64 (3 << 24) +#define FRLISTEN_64_SIZE 64 +#define HCFG_DESCDMA BIT(23) +#define HCFG_RESVALID_MASK (0xff << 8) +#define HCFG_RESVALID_SHIFT 8 +#define HCFG_ENA32KHZ BIT(7) +#define HCFG_FSLSSUPP BIT(2) +#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0) +#define HCFG_FSLSPCLKSEL_SHIFT 0 +#define HCFG_FSLSPCLKSEL_30_60_MHZ 0 +#define HCFG_FSLSPCLKSEL_48_MHZ 1 +#define HCFG_FSLSPCLKSEL_6_MHZ 2 + +#define HFIR HSOTG_REG(0x0404) +#define HFIR_FRINT_MASK (0xffff << 0) +#define HFIR_FRINT_SHIFT 0 +#define HFIR_RLDCTRL BIT(16) + +#define HFNUM HSOTG_REG(0x0408) +#define HFNUM_FRREM_MASK (0xffff << 16) +#define HFNUM_FRREM_SHIFT 16 +#define HFNUM_FRNUM_MASK (0xffff << 0) +#define HFNUM_FRNUM_SHIFT 0 +#define HFNUM_MAX_FRNUM 0x3fff + +#define HPTXSTS HSOTG_REG(0x0410) +#define TXSTS_QTOP_ODD BIT(31) +#define TXSTS_QTOP_CHNEP_MASK (0xf << 27) +#define TXSTS_QTOP_CHNEP_SHIFT 27 +#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25) +#define TXSTS_QTOP_TOKEN_SHIFT 25 +#define TXSTS_QTOP_TERMINATE BIT(24) +#define TXSTS_QSPCAVAIL_MASK (0xff << 16) +#define TXSTS_QSPCAVAIL_SHIFT 16 +#define TXSTS_FSPCAVAIL_MASK (0xffff << 0) +#define TXSTS_FSPCAVAIL_SHIFT 0 + +#define HAINT HSOTG_REG(0x0414) +#define HAINTMSK HSOTG_REG(0x0418) +#define HFLBADDR HSOTG_REG(0x041c) + +#define HPRT0 HSOTG_REG(0x0440) +#define HPRT0_SPD_MASK (0x3 << 17) +#define HPRT0_SPD_SHIFT 17 +#define HPRT0_SPD_HIGH_SPEED 0 +#define HPRT0_SPD_FULL_SPEED 1 +#define HPRT0_SPD_LOW_SPEED 2 +#define HPRT0_TSTCTL_MASK (0xf << 13) +#define HPRT0_TSTCTL_SHIFT 13 +#define HPRT0_PWR BIT(12) +#define HPRT0_LNSTS_MASK (0x3 << 10) +#define HPRT0_LNSTS_SHIFT 10 +#define HPRT0_RST BIT(8) +#define HPRT0_SUSP BIT(7) +#define HPRT0_RES BIT(6) +#define HPRT0_OVRCURRCHG BIT(5) +#define HPRT0_OVRCURRACT BIT(4) +#define HPRT0_ENACHG BIT(3) +#define HPRT0_ENA BIT(2) +#define HPRT0_CONNDET BIT(1) +#define HPRT0_CONNSTS BIT(0) + +#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch)) +#define HCCHAR_CHENA BIT(31) +#define HCCHAR_CHDIS BIT(30) +#define HCCHAR_ODDFRM BIT(29) +#define HCCHAR_DEVADDR_MASK (0x7f << 22) +#define HCCHAR_DEVADDR_SHIFT 22 +#define HCCHAR_MULTICNT_MASK (0x3 << 20) +#define HCCHAR_MULTICNT_SHIFT 20 +#define HCCHAR_EPTYPE_MASK (0x3 << 18) +#define HCCHAR_EPTYPE_SHIFT 18 +#define HCCHAR_LSPDDEV BIT(17) +#define HCCHAR_EPDIR BIT(15) +#define HCCHAR_EPNUM_MASK (0xf << 11) +#define HCCHAR_EPNUM_SHIFT 11 +#define HCCHAR_MPS_MASK (0x7ff << 0) +#define HCCHAR_MPS_SHIFT 0 + +#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch)) +#define HCSPLT_SPLTENA BIT(31) +#define HCSPLT_COMPSPLT BIT(16) +#define HCSPLT_XACTPOS_MASK (0x3 << 14) +#define HCSPLT_XACTPOS_SHIFT 14 +#define HCSPLT_XACTPOS_MID 0 +#define HCSPLT_XACTPOS_END 1 +#define HCSPLT_XACTPOS_BEGIN 2 +#define HCSPLT_XACTPOS_ALL 3 +#define HCSPLT_HUBADDR_MASK (0x7f << 7) +#define HCSPLT_HUBADDR_SHIFT 7 +#define HCSPLT_PRTADDR_MASK (0x7f << 0) +#define HCSPLT_PRTADDR_SHIFT 0 + +#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch)) +#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch)) +#define HCINTMSK_RESERVED14_31 (0x3ffff << 14) +#define HCINTMSK_FRM_LIST_ROLL BIT(13) +#define HCINTMSK_XCS_XACT BIT(12) +#define HCINTMSK_BNA BIT(11) +#define HCINTMSK_DATATGLERR BIT(10) +#define HCINTMSK_FRMOVRUN BIT(9) +#define HCINTMSK_BBLERR BIT(8) +#define HCINTMSK_XACTERR BIT(7) +#define HCINTMSK_NYET BIT(6) +#define HCINTMSK_ACK BIT(5) +#define HCINTMSK_NAK BIT(4) +#define HCINTMSK_STALL BIT(3) +#define HCINTMSK_AHBERR BIT(2) +#define HCINTMSK_CHHLTD BIT(1) +#define HCINTMSK_XFERCOMPL BIT(0) + +#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch)) +#define TSIZ_DOPNG BIT(31) +#define TSIZ_SC_MC_PID_MASK (0x3 << 29) +#define TSIZ_SC_MC_PID_SHIFT 29 +#define TSIZ_SC_MC_PID_DATA0 0 +#define TSIZ_SC_MC_PID_DATA2 1 +#define TSIZ_SC_MC_PID_DATA1 2 +#define TSIZ_SC_MC_PID_MDATA 3 +#define TSIZ_SC_MC_PID_SETUP 3 +#define TSIZ_PKTCNT_MASK (0x3ff << 19) +#define TSIZ_PKTCNT_SHIFT 19 +#define TSIZ_NTD_MASK (0xff << 8) +#define TSIZ_NTD_SHIFT 8 +#define TSIZ_SCHINFO_MASK (0xff << 0) +#define TSIZ_SCHINFO_SHIFT 0 +#define TSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define TSIZ_XFERSIZE_SHIFT 0 + +#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch)) + +#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch)) + +#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch)) + +/** + * struct dwc2_dma_desc - DMA descriptor structure, + * used for both host and gadget modes + * + * @status: DMA descriptor status quadlet + * @buf: DMA descriptor data buffer pointer + * + * DMA Descriptor structure contains two quadlets: + * Status quadlet and Data buffer pointer. + */ +struct dwc2_dma_desc { + uint32_t status; + uint32_t buf; +} __packed; + +/* Host Mode DMA descriptor status quadlet */ + +#define HOST_DMA_A BIT(31) +#define HOST_DMA_STS_MASK (0x3 << 28) +#define HOST_DMA_STS_SHIFT 28 +#define HOST_DMA_STS_PKTERR BIT(28) +#define HOST_DMA_EOL BIT(26) +#define HOST_DMA_IOC BIT(25) +#define HOST_DMA_SUP BIT(24) +#define HOST_DMA_ALT_QTD BIT(23) +#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17) +#define HOST_DMA_QTD_OFFSET_SHIFT 17 +#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0) +#define HOST_DMA_ISOC_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_MASK (0x1ffff << 0) +#define HOST_DMA_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_LIMIT 131071 + +/* Device Mode DMA descriptor status quadlet */ + +#define DEV_DMA_BUFF_STS_MASK (0x3 << 30) +#define DEV_DMA_BUFF_STS_SHIFT 30 +#define DEV_DMA_BUFF_STS_HREADY 0 +#define DEV_DMA_BUFF_STS_DMABUSY 1 +#define DEV_DMA_BUFF_STS_DMADONE 2 +#define DEV_DMA_BUFF_STS_HBUSY 3 +#define DEV_DMA_STS_MASK (0x3 << 28) +#define DEV_DMA_STS_SHIFT 28 +#define DEV_DMA_STS_SUCC 0 +#define DEV_DMA_STS_BUFF_FLUSH 1 +#define DEV_DMA_STS_BUFF_ERR 3 +#define DEV_DMA_L BIT(27) +#define DEV_DMA_SHORT BIT(26) +#define DEV_DMA_IOC BIT(25) +#define DEV_DMA_SR BIT(24) +#define DEV_DMA_MTRF BIT(23) +#define DEV_DMA_ISOC_PID_MASK (0x3 << 23) +#define DEV_DMA_ISOC_PID_SHIFT 23 +#define DEV_DMA_ISOC_PID_DATA0 0 +#define DEV_DMA_ISOC_PID_DATA2 1 +#define DEV_DMA_ISOC_PID_DATA1 2 +#define DEV_DMA_ISOC_PID_MDATA 3 +#define DEV_DMA_ISOC_FRNUM_MASK (0x7ff << 12) +#define DEV_DMA_ISOC_FRNUM_SHIFT 12 +#define DEV_DMA_ISOC_TX_NBYTES_MASK (0xfff << 0) +#define DEV_DMA_ISOC_TX_NBYTES_LIMIT 0xfff +#define DEV_DMA_ISOC_RX_NBYTES_MASK (0x7ff << 0) +#define DEV_DMA_ISOC_RX_NBYTES_LIMIT 0x7ff +#define DEV_DMA_ISOC_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_MASK (0xffff << 0) +#define DEV_DMA_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_LIMIT 0xffff + +#define MAX_DMA_DESC_NUM_GENERIC 64 +#define MAX_DMA_DESC_NUM_HS_ISOC 256 + +#endif /* __DWC2_HW_H__ */ -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add the dwc-hsotg (dwc2) USB host controller state definitions. Mostly based on hw/usb/hcd-ehci.h. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-4-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-dwc2.h | 190 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 hw/usb/hcd-dwc2.h diff --git a/hw/usb/hcd-dwc2.h b/hw/usb/hcd-dwc2.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc2.h @@ -XXX,XX +XXX,XX @@ +/* + * dwc-hsotg (dwc2) USB host controller state definitions + * + * Based on hw/usb/hcd-ehci.h + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HW_USB_DWC2_H +#define HW_USB_DWC2_H + +#include "qemu/timer.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "hw/usb.h" +#include "sysemu/dma.h" + +#define DWC2_MMIO_SIZE 0x11000 + +#define DWC2_NB_CHAN 8 /* Number of host channels */ +#define DWC2_MAX_XFER_SIZE 65536 /* Max transfer size expected in HCTSIZ */ + +typedef struct DWC2Packet DWC2Packet; +typedef struct DWC2State DWC2State; +typedef struct DWC2Class DWC2Class; + +enum async_state { + DWC2_ASYNC_NONE = 0, + DWC2_ASYNC_INITIALIZED, + DWC2_ASYNC_INFLIGHT, + DWC2_ASYNC_FINISHED, +}; + +struct DWC2Packet { + USBPacket packet; + uint32_t devadr; + uint32_t epnum; + uint32_t epdir; + uint32_t mps; + uint32_t pid; + uint32_t index; + uint32_t pcnt; + uint32_t len; + int32_t async; + bool small; + bool needs_service; +}; + +struct DWC2State { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + USBBus bus; + qemu_irq irq; + MemoryRegion *dma_mr; + AddressSpace dma_as; + MemoryRegion container; + MemoryRegion hsotg; + MemoryRegion fifos; + + union { +#define DWC2_GLBREG_SIZE 0x70 + uint32_t glbreg[DWC2_GLBREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t gotgctl; /* 00 */ + uint32_t gotgint; /* 04 */ + uint32_t gahbcfg; /* 08 */ + uint32_t gusbcfg; /* 0c */ + uint32_t grstctl; /* 10 */ + uint32_t gintsts; /* 14 */ + uint32_t gintmsk; /* 18 */ + uint32_t grxstsr; /* 1c */ + uint32_t grxstsp; /* 20 */ + uint32_t grxfsiz; /* 24 */ + uint32_t gnptxfsiz; /* 28 */ + uint32_t gnptxsts; /* 2c */ + uint32_t gi2cctl; /* 30 */ + uint32_t gpvndctl; /* 34 */ + uint32_t ggpio; /* 38 */ + uint32_t guid; /* 3c */ + uint32_t gsnpsid; /* 40 */ + uint32_t ghwcfg1; /* 44 */ + uint32_t ghwcfg2; /* 48 */ + uint32_t ghwcfg3; /* 4c */ + uint32_t ghwcfg4; /* 50 */ + uint32_t glpmcfg; /* 54 */ + uint32_t gpwrdn; /* 58 */ + uint32_t gdfifocfg; /* 5c */ + uint32_t gadpctl; /* 60 */ + uint32_t grefclk; /* 64 */ + uint32_t gintmsk2; /* 68 */ + uint32_t gintsts2; /* 6c */ + }; + }; + + union { +#define DWC2_FSZREG_SIZE 0x04 + uint32_t fszreg[DWC2_FSZREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t hptxfsiz; /* 100 */ + }; + }; + + union { +#define DWC2_HREG0_SIZE 0x44 + uint32_t hreg0[DWC2_HREG0_SIZE / sizeof(uint32_t)]; + struct { + uint32_t hcfg; /* 400 */ + uint32_t hfir; /* 404 */ + uint32_t hfnum; /* 408 */ + uint32_t rsvd0; /* 40c */ + uint32_t hptxsts; /* 410 */ + uint32_t haint; /* 414 */ + uint32_t haintmsk; /* 418 */ + uint32_t hflbaddr; /* 41c */ + uint32_t rsvd1[8]; /* 420-43c */ + uint32_t hprt0; /* 440 */ + }; + }; + +#define DWC2_HREG1_SIZE (0x20 * DWC2_NB_CHAN) + uint32_t hreg1[DWC2_HREG1_SIZE / sizeof(uint32_t)]; + +#define hcchar(_ch) hreg1[((_ch) << 3) + 0] /* 500, 520, ... */ +#define hcsplt(_ch) hreg1[((_ch) << 3) + 1] /* 504, 524, ... */ +#define hcint(_ch) hreg1[((_ch) << 3) + 2] /* 508, 528, ... */ +#define hcintmsk(_ch) hreg1[((_ch) << 3) + 3] /* 50c, 52c, ... */ +#define hctsiz(_ch) hreg1[((_ch) << 3) + 4] /* 510, 530, ... */ +#define hcdma(_ch) hreg1[((_ch) << 3) + 5] /* 514, 534, ... */ +#define hcdmab(_ch) hreg1[((_ch) << 3) + 7] /* 51c, 53c, ... */ + + union { +#define DWC2_PCGREG_SIZE 0x08 + uint32_t pcgreg[DWC2_PCGREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t pcgctl; /* e00 */ + uint32_t pcgcctl1; /* e04 */ + }; + }; + + /* TODO - implement FIFO registers for slave mode */ +#define DWC2_HFIFO_SIZE (0x1000 * DWC2_NB_CHAN) + + /* + * Internal state + */ + QEMUTimer *eof_timer; + QEMUTimer *frame_timer; + QEMUBH *async_bh; + int64_t sof_time; + int64_t usb_frame_time; + int64_t usb_bit_time; + uint32_t usb_version; + uint16_t frame_number; + uint16_t fi; + uint16_t next_chan; + bool working; + USBPort uport; + DWC2Packet packet[DWC2_NB_CHAN]; /* one packet per chan */ + uint8_t usb_buf[DWC2_NB_CHAN][DWC2_MAX_XFER_SIZE]; /* one buffer per chan */ +}; + +struct DWC2Class { + /*< private >*/ + SysBusDeviceClass parent_class; + ResettablePhases parent_phases; + + /*< public >*/ +}; + +#define TYPE_DWC2_USB "dwc2-usb" +#define DWC2_USB(obj) \ + OBJECT_CHECK(DWC2State, (obj), TYPE_DWC2_USB) +#define DWC2_CLASS(klass) \ + OBJECT_CLASS_CHECK(DWC2Class, (klass), TYPE_DWC2_USB) +#define DWC2_GET_CLASS(obj) \ + OBJECT_GET_CLASS(DWC2Class, (obj), TYPE_DWC2_USB) + +#endif -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add the dwc-hsotg (dwc2) USB host controller emulation code. Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c. Note that to use this with the dwc-otg driver in the Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on the kernel command line. Emulation of slave mode and of descriptor-DMA mode has not been implemented yet. These modes are seldom used. I have used some on-line sources of information while developing this emulation, including: http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf which has a pretty complete description of the controller starting on page 370. https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf which has a description of the controller registers starting on page 130. Thanks to Felippe Mathieu-Daude for providing a cleaner method of implementing the memory regions for the controller registers. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-5-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++++++++++++ hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/trace-events | 50 ++ 4 files changed, 1473 insertions(+) create mode 100644 hw/usb/hcd-dwc2.c diff --git a/hw/usb/hcd-dwc2.c b/hw/usb/hcd-dwc2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc2.c @@ -XXX,XX +XXX,XX @@ +/* + * dwc-hsotg (dwc2) USB host controller emulation + * + * Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c + * + * Note that to use this emulation with the dwc-otg driver in the + * Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" + * on the kernel command line. + * + * Some useful documentation used to develop this emulation can be + * found online (as of April 2020) at: + * + * http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf + * which has a pretty complete description of the controller starting + * on page 370. + * + * https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf + * which has a description of the controller registers starting on + * page 130. + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "hw/usb/dwc2-regs.h" +#include "hw/usb/hcd-dwc2.h" +#include "migration/vmstate.h" +#include "trace.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "qemu/main-loop.h" +#include "hw/qdev-properties.h" + +#define USB_HZ_FS 12000000 +#define USB_HZ_HS 96000000 +#define USB_FRMINTVL 12000 + +/* nifty macros from Arnon's EHCI version */ +#define get_field(data, field) \ + (((data) & field##_MASK) >> field##_SHIFT) + +#define set_field(data, newval, field) do { \ + uint32_t val = *(data); \ + val &= ~field##_MASK; \ + val |= ((newval) << field##_SHIFT) & field##_MASK; \ + *(data) = val; \ +} while (0) + +#define get_bit(data, bitmask) \ + (!!((data) & (bitmask))) + +/* update irq line */ +static inline void dwc2_update_irq(DWC2State *s) +{ + static int oldlevel; + int level = 0; + + if ((s->gintsts & s->gintmsk) && (s->gahbcfg & GAHBCFG_GLBL_INTR_EN)) { + level = 1; + } + if (level != oldlevel) { + oldlevel = level; + trace_usb_dwc2_update_irq(level); + qemu_set_irq(s->irq, level); + } +} + +/* flag interrupt condition */ +static inline void dwc2_raise_global_irq(DWC2State *s, uint32_t intr) +{ + if (!(s->gintsts & intr)) { + s->gintsts |= intr; + trace_usb_dwc2_raise_global_irq(intr); + dwc2_update_irq(s); + } +} + +static inline void dwc2_lower_global_irq(DWC2State *s, uint32_t intr) +{ + if (s->gintsts & intr) { + s->gintsts &= ~intr; + trace_usb_dwc2_lower_global_irq(intr); + dwc2_update_irq(s); + } +} + +static inline void dwc2_raise_host_irq(DWC2State *s, uint32_t host_intr) +{ + if (!(s->haint & host_intr)) { + s->haint |= host_intr; + s->haint &= 0xffff; + trace_usb_dwc2_raise_host_irq(host_intr); + if (s->haint & s->haintmsk) { + dwc2_raise_global_irq(s, GINTSTS_HCHINT); + } + } +} + +static inline void dwc2_lower_host_irq(DWC2State *s, uint32_t host_intr) +{ + if (s->haint & host_intr) { + s->haint &= ~host_intr; + trace_usb_dwc2_lower_host_irq(host_intr); + if (!(s->haint & s->haintmsk)) { + dwc2_lower_global_irq(s, GINTSTS_HCHINT); + } + } +} + +static inline void dwc2_update_hc_irq(DWC2State *s, int index) +{ + uint32_t host_intr = 1 << (index >> 3); + + if (s->hreg1[index + 2] & s->hreg1[index + 3]) { + dwc2_raise_host_irq(s, host_intr); + } else { + dwc2_lower_host_irq(s, host_intr); + } +} + +/* set a timer for EOF */ +static void dwc2_eof_timer(DWC2State *s) +{ + timer_mod(s->eof_timer, s->sof_time + s->usb_frame_time); +} + +/* Set a timer for EOF and generate SOF event */ +static void dwc2_sof(DWC2State *s) +{ + s->sof_time += s->usb_frame_time; + trace_usb_dwc2_sof(s->sof_time); + dwc2_eof_timer(s); + dwc2_raise_global_irq(s, GINTSTS_SOF); +} + +/* Do frame processing on frame boundary */ +static void dwc2_frame_boundary(void *opaque) +{ + DWC2State *s = opaque; + int64_t now; + uint16_t frcnt; + + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + /* Frame boundary, so do EOF stuff here */ + + /* Increment frame number */ + frcnt = (uint16_t)((now - s->sof_time) / s->fi); + s->frame_number = (s->frame_number + frcnt) & 0xffff; + s->hfnum = s->frame_number & HFNUM_MAX_FRNUM; + + /* Do SOF stuff here */ + dwc2_sof(s); +} + +/* Start sending SOF tokens on the USB bus */ +static void dwc2_bus_start(DWC2State *s) +{ + trace_usb_dwc2_bus_start(); + s->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + dwc2_eof_timer(s); +} + +/* Stop sending SOF tokens on the USB bus */ +static void dwc2_bus_stop(DWC2State *s) +{ + trace_usb_dwc2_bus_stop(); + timer_del(s->eof_timer); +} + +static USBDevice *dwc2_find_device(DWC2State *s, uint8_t addr) +{ + USBDevice *dev; + + trace_usb_dwc2_find_device(addr); + + if (!(s->hprt0 & HPRT0_ENA)) { + trace_usb_dwc2_port_disabled(0); + } else { + dev = usb_find_device(&s->uport, addr); + if (dev != NULL) { + trace_usb_dwc2_device_found(0); + return dev; + } + } + + trace_usb_dwc2_device_not_found(); + return NULL; +} + +static const char *pstatus[] = { + "USB_RET_SUCCESS", "USB_RET_NODEV", "USB_RET_NAK", "USB_RET_STALL", + "USB_RET_BABBLE", "USB_RET_IOERROR", "USB_RET_ASYNC", + "USB_RET_ADD_TO_QUEUE", "USB_RET_REMOVE_FROM_QUEUE" +}; + +static uint32_t pintr[] = { + HCINTMSK_XFERCOMPL, HCINTMSK_XACTERR, HCINTMSK_NAK, HCINTMSK_STALL, + HCINTMSK_BBLERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, + HCINTMSK_XACTERR +}; + +static const char *types[] = { + "Ctrl", "Isoc", "Bulk", "Intr" +}; + +static const char *dirs[] = { + "Out", "In" +}; + +static void dwc2_handle_packet(DWC2State *s, uint32_t devadr, USBDevice *dev, + USBEndpoint *ep, uint32_t index, bool send) +{ + DWC2Packet *p; + uint32_t hcchar = s->hreg1[index]; + uint32_t hctsiz = s->hreg1[index + 4]; + uint32_t hcdma = s->hreg1[index + 5]; + uint32_t chan, epnum, epdir, eptype, mps, pid, pcnt, len, tlen, intr = 0; + uint32_t tpcnt, stsidx, actual = 0; + bool do_intr = false, done = false; + + epnum = get_field(hcchar, HCCHAR_EPNUM); + epdir = get_bit(hcchar, HCCHAR_EPDIR); + eptype = get_field(hcchar, HCCHAR_EPTYPE); + mps = get_field(hcchar, HCCHAR_MPS); + pid = get_field(hctsiz, TSIZ_SC_MC_PID); + pcnt = get_field(hctsiz, TSIZ_PKTCNT); + len = get_field(hctsiz, TSIZ_XFERSIZE); + assert(len <= DWC2_MAX_XFER_SIZE); + chan = index >> 3; + p = &s->packet[chan]; + + trace_usb_dwc2_handle_packet(chan, dev, &p->packet, epnum, types[eptype], + dirs[epdir], mps, len, pcnt); + + if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { + pid = USB_TOKEN_SETUP; + } else { + pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; + } + + if (send) { + tlen = len; + if (p->small) { + if (tlen > mps) { + tlen = mps; + } + } + + if (pid != USB_TOKEN_IN) { + trace_usb_dwc2_memory_read(hcdma, tlen); + if (dma_memory_read(&s->dma_as, hcdma, + s->usb_buf[chan], tlen) != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_read failed\n", + __func__); + } + } + + usb_packet_init(&p->packet); + usb_packet_setup(&p->packet, pid, ep, 0, hcdma, + pid != USB_TOKEN_IN, true); + usb_packet_addbuf(&p->packet, s->usb_buf[chan], tlen); + p->async = DWC2_ASYNC_NONE; + usb_handle_packet(dev, &p->packet); + } else { + tlen = p->len; + } + + stsidx = -p->packet.status; + assert(stsidx < sizeof(pstatus) / sizeof(*pstatus)); + actual = p->packet.actual_length; + trace_usb_dwc2_packet_status(pstatus[stsidx], actual); + +babble: + if (p->packet.status != USB_RET_SUCCESS && + p->packet.status != USB_RET_NAK && + p->packet.status != USB_RET_STALL && + p->packet.status != USB_RET_ASYNC) { + trace_usb_dwc2_packet_error(pstatus[stsidx]); + } + + if (p->packet.status == USB_RET_ASYNC) { + trace_usb_dwc2_async_packet(&p->packet, chan, dev, epnum, + dirs[epdir], tlen); + usb_device_flush_ep_queue(dev, ep); + assert(p->async != DWC2_ASYNC_INFLIGHT); + p->devadr = devadr; + p->epnum = epnum; + p->epdir = epdir; + p->mps = mps; + p->pid = pid; + p->index = index; + p->pcnt = pcnt; + p->len = tlen; + p->async = DWC2_ASYNC_INFLIGHT; + p->needs_service = false; + return; + } + + if (p->packet.status == USB_RET_SUCCESS) { + if (actual > tlen) { + p->packet.status = USB_RET_BABBLE; + goto babble; + } + + if (pid == USB_TOKEN_IN) { + trace_usb_dwc2_memory_write(hcdma, actual); + if (dma_memory_write(&s->dma_as, hcdma, s->usb_buf[chan], + actual) != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_write failed\n", + __func__); + } + } + + tpcnt = actual / mps; + if (actual % mps) { + tpcnt++; + if (pid == USB_TOKEN_IN) { + done = true; + } + } + + pcnt -= tpcnt < pcnt ? tpcnt : pcnt; + set_field(&hctsiz, pcnt, TSIZ_PKTCNT); + len -= actual < len ? actual : len; + set_field(&hctsiz, len, TSIZ_XFERSIZE); + s->hreg1[index + 4] = hctsiz; + hcdma += actual; + s->hreg1[index + 5] = hcdma; + + if (!pcnt || len == 0 || actual == 0) { + done = true; + } + } else { + intr |= pintr[stsidx]; + if (p->packet.status == USB_RET_NAK && + (eptype == USB_ENDPOINT_XFER_CONTROL || + eptype == USB_ENDPOINT_XFER_BULK)) { + /* + * for ctrl/bulk, automatically retry on NAK, + * but send the interrupt anyway + */ + intr &= ~HCINTMSK_RESERVED14_31; + s->hreg1[index + 2] |= intr; + do_intr = true; + } else { + intr |= HCINTMSK_CHHLTD; + done = true; + } + } + + usb_packet_cleanup(&p->packet); + + if (done) { + hcchar &= ~HCCHAR_CHENA; + s->hreg1[index] = hcchar; + if (!(intr & HCINTMSK_CHHLTD)) { + intr |= HCINTMSK_CHHLTD | HCINTMSK_XFERCOMPL; + } + intr &= ~HCINTMSK_RESERVED14_31; + s->hreg1[index + 2] |= intr; + p->needs_service = false; + trace_usb_dwc2_packet_done(pstatus[stsidx], actual, len, pcnt); + dwc2_update_hc_irq(s, index); + return; + } + + p->devadr = devadr; + p->epnum = epnum; + p->epdir = epdir; + p->mps = mps; + p->pid = pid; + p->index = index; + p->pcnt = pcnt; + p->len = len; + p->needs_service = true; + trace_usb_dwc2_packet_next(pstatus[stsidx], len, pcnt); + if (do_intr) { + dwc2_update_hc_irq(s, index); + } +} + +/* Attach or detach a device on root hub */ + +static const char *speeds[] = { + "low", "full", "high" +}; + +static void dwc2_attach(USBPort *port) +{ + DWC2State *s = port->opaque; + int hispd = 0; + + trace_usb_dwc2_attach(port); + assert(port->index == 0); + + if (!port->dev || !port->dev->attached) { + return; + } + + assert(port->dev->speed <= USB_SPEED_HIGH); + trace_usb_dwc2_attach_speed(speeds[port->dev->speed]); + s->hprt0 &= ~HPRT0_SPD_MASK; + + switch (port->dev->speed) { + case USB_SPEED_LOW: + s->hprt0 |= HPRT0_SPD_LOW_SPEED << HPRT0_SPD_SHIFT; + break; + case USB_SPEED_FULL: + s->hprt0 |= HPRT0_SPD_FULL_SPEED << HPRT0_SPD_SHIFT; + break; + case USB_SPEED_HIGH: + s->hprt0 |= HPRT0_SPD_HIGH_SPEED << HPRT0_SPD_SHIFT; + hispd = 1; + break; + } + + if (hispd) { + s->usb_frame_time = NANOSECONDS_PER_SECOND / 8000; /* 125000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_HS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_HS; /* 10.4 */ + } else { + s->usb_bit_time = 1; + } + } else { + s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ + } else { + s->usb_bit_time = 1; + } + } + + s->fi = USB_FRMINTVL - 1; + s->hprt0 |= HPRT0_CONNDET | HPRT0_CONNSTS; + + dwc2_bus_start(s); + dwc2_raise_global_irq(s, GINTSTS_PRTINT); +} + +static void dwc2_detach(USBPort *port) +{ + DWC2State *s = port->opaque; + + trace_usb_dwc2_detach(port); + assert(port->index == 0); + + dwc2_bus_stop(s); + + s->hprt0 &= ~(HPRT0_SPD_MASK | HPRT0_SUSP | HPRT0_ENA | HPRT0_CONNSTS); + s->hprt0 |= HPRT0_CONNDET | HPRT0_ENACHG; + + dwc2_raise_global_irq(s, GINTSTS_PRTINT); +} + +static void dwc2_child_detach(USBPort *port, USBDevice *child) +{ + trace_usb_dwc2_child_detach(port, child); + assert(port->index == 0); +} + +static void dwc2_wakeup(USBPort *port) +{ + DWC2State *s = port->opaque; + + trace_usb_dwc2_wakeup(port); + assert(port->index == 0); + + if (s->hprt0 & HPRT0_SUSP) { + s->hprt0 |= HPRT0_RES; + dwc2_raise_global_irq(s, GINTSTS_PRTINT); + } + + qemu_bh_schedule(s->async_bh); +} + +static void dwc2_async_packet_complete(USBPort *port, USBPacket *packet) +{ + DWC2State *s = port->opaque; + DWC2Packet *p; + USBDevice *dev; + USBEndpoint *ep; + + assert(port->index == 0); + p = container_of(packet, DWC2Packet, packet); + dev = dwc2_find_device(s, p->devadr); + ep = usb_ep_get(dev, p->pid, p->epnum); + trace_usb_dwc2_async_packet_complete(port, packet, p->index >> 3, dev, + p->epnum, dirs[p->epdir], p->len); + assert(p->async == DWC2_ASYNC_INFLIGHT); + + if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { + usb_cancel_packet(packet); + usb_packet_cleanup(packet); + return; + } + + dwc2_handle_packet(s, p->devadr, dev, ep, p->index, false); + + p->async = DWC2_ASYNC_FINISHED; + qemu_bh_schedule(s->async_bh); +} + +static USBPortOps dwc2_port_ops = { + .attach = dwc2_attach, + .detach = dwc2_detach, + .child_detach = dwc2_child_detach, + .wakeup = dwc2_wakeup, + .complete = dwc2_async_packet_complete, +}; + +static uint32_t dwc2_get_frame_remaining(DWC2State *s) +{ + uint32_t fr = 0; + int64_t tks; + + tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - s->sof_time; + if (tks < 0) { + tks = 0; + } + + /* avoid muldiv if possible */ + if (tks >= s->usb_frame_time) { + goto out; + } + if (tks < s->usb_bit_time) { + fr = s->fi; + goto out; + } + + /* tks = number of ns since SOF, divided by 83 (fs) or 10 (hs) */ + tks = tks / s->usb_bit_time; + if (tks >= (int64_t)s->fi) { + goto out; + } + + /* remaining = frame interval minus tks */ + fr = (uint32_t)((int64_t)s->fi - tks); + +out: + return fr; +} + +static void dwc2_work_bh(void *opaque) +{ + DWC2State *s = opaque; + DWC2Packet *p; + USBDevice *dev; + USBEndpoint *ep; + int64_t t_now, expire_time; + int chan; + bool found = false; + + trace_usb_dwc2_work_bh(); + if (s->working) { + return; + } + s->working = true; + + t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + chan = s->next_chan; + + do { + p = &s->packet[chan]; + if (p->needs_service) { + dev = dwc2_find_device(s, p->devadr); + ep = usb_ep_get(dev, p->pid, p->epnum); + trace_usb_dwc2_work_bh_service(s->next_chan, chan, dev, p->epnum); + dwc2_handle_packet(s, p->devadr, dev, ep, p->index, true); + found = true; + } + if (++chan == DWC2_NB_CHAN) { + chan = 0; + } + if (found) { + s->next_chan = chan; + trace_usb_dwc2_work_bh_next(chan); + } + } while (chan != s->next_chan); + + if (found) { + expire_time = t_now + NANOSECONDS_PER_SECOND / 4000; + timer_mod(s->frame_timer, expire_time); + } + s->working = false; +} + +static void dwc2_enable_chan(DWC2State *s, uint32_t index) +{ + USBDevice *dev; + USBEndpoint *ep; + uint32_t hcchar; + uint32_t hctsiz; + uint32_t devadr, epnum, epdir, eptype, pid, len; + DWC2Packet *p; + + assert((index >> 3) < DWC2_NB_CHAN); + p = &s->packet[index >> 3]; + hcchar = s->hreg1[index]; + hctsiz = s->hreg1[index + 4]; + devadr = get_field(hcchar, HCCHAR_DEVADDR); + epnum = get_field(hcchar, HCCHAR_EPNUM); + epdir = get_bit(hcchar, HCCHAR_EPDIR); + eptype = get_field(hcchar, HCCHAR_EPTYPE); + pid = get_field(hctsiz, TSIZ_SC_MC_PID); + len = get_field(hctsiz, TSIZ_XFERSIZE); + + dev = dwc2_find_device(s, devadr); + + trace_usb_dwc2_enable_chan(index >> 3, dev, &p->packet, epnum); + if (dev == NULL) { + return; + } + + if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { + pid = USB_TOKEN_SETUP; + } else { + pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; + } + + ep = usb_ep_get(dev, pid, epnum); + + /* + * Hack: Networking doesn't like us delivering large transfers, it kind + * of works but the latency is horrible. So if the transfer is <= the mtu + * size, we take that as a hint that this might be a network transfer, + * and do the transfer packet-by-packet. + */ + if (len > 1536) { + p->small = false; + } else { + p->small = true; + } + + dwc2_handle_packet(s, devadr, dev, ep, index, true); + qemu_bh_schedule(s->async_bh); +} + +static const char *glbregnm[] = { + "GOTGCTL ", "GOTGINT ", "GAHBCFG ", "GUSBCFG ", "GRSTCTL ", + "GINTSTS ", "GINTMSK ", "GRXSTSR ", "GRXSTSP ", "GRXFSIZ ", + "GNPTXFSIZ", "GNPTXSTS ", "GI2CCTL ", "GPVNDCTL ", "GGPIO ", + "GUID ", "GSNPSID ", "GHWCFG1 ", "GHWCFG2 ", "GHWCFG3 ", + "GHWCFG4 ", "GLPMCFG ", "GPWRDN ", "GDFIFOCFG", "GADPCTL ", + "GREFCLK ", "GINTMSK2 ", "GINTSTS2 " +}; + +static uint64_t dwc2_glbreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr <= GINTSTS2); + val = s->glbreg[index]; + + switch (addr) { + case GRSTCTL: + /* clear any self-clearing bits that were set */ + val &= ~(GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | GRSTCTL_IN_TKNQ_FLSH | + GRSTCTL_FRMCNTRRST | GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); + s->glbreg[index] = val; + break; + default: + break; + } + + trace_usb_dwc2_glbreg_read(addr, glbregnm[index], val); + return val; +} + +static void dwc2_glbreg_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + int iflg = 0; + + assert(addr <= GINTSTS2); + mmio = &s->glbreg[index]; + old = *mmio; + + switch (addr) { + case GOTGCTL: + /* don't allow setting of read-only bits */ + val &= ~(GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | + GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | + GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); + /* don't allow clearing of read-only bits */ + val |= old & (GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | + GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | + GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); + break; + case GAHBCFG: + if ((val & GAHBCFG_GLBL_INTR_EN) && !(old & GAHBCFG_GLBL_INTR_EN)) { + iflg = 1; + } + break; + case GRSTCTL: + val |= GRSTCTL_AHBIDLE; + val &= ~GRSTCTL_DMAREQ; + if (!(old & GRSTCTL_TXFFLSH) && (val & GRSTCTL_TXFFLSH)) { + /* TODO - TX fifo flush */ + qemu_log_mask(LOG_UNIMP, "Tx FIFO flush not implemented\n"); + } + if (!(old & GRSTCTL_RXFFLSH) && (val & GRSTCTL_RXFFLSH)) { + /* TODO - RX fifo flush */ + qemu_log_mask(LOG_UNIMP, "Rx FIFO flush not implemented\n"); + } + if (!(old & GRSTCTL_IN_TKNQ_FLSH) && (val & GRSTCTL_IN_TKNQ_FLSH)) { + /* TODO - device IN token queue flush */ + qemu_log_mask(LOG_UNIMP, "Token queue flush not implemented\n"); + } + if (!(old & GRSTCTL_FRMCNTRRST) && (val & GRSTCTL_FRMCNTRRST)) { + /* TODO - host frame counter reset */ + qemu_log_mask(LOG_UNIMP, "Frame counter reset not implemented\n"); + } + if (!(old & GRSTCTL_HSFTRST) && (val & GRSTCTL_HSFTRST)) { + /* TODO - host soft reset */ + qemu_log_mask(LOG_UNIMP, "Host soft reset not implemented\n"); + } + if (!(old & GRSTCTL_CSFTRST) && (val & GRSTCTL_CSFTRST)) { + /* TODO - core soft reset */ + qemu_log_mask(LOG_UNIMP, "Core soft reset not implemented\n"); + } + /* don't allow clearing of self-clearing bits */ + val |= old & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | + GRSTCTL_IN_TKNQ_FLSH | GRSTCTL_FRMCNTRRST | + GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); + break; + case GINTSTS: + /* clear the write-1-to-clear bits */ + val |= ~old; + val = ~val; + /* don't allow clearing of read-only bits */ + val |= old & (GINTSTS_PTXFEMP | GINTSTS_HCHINT | GINTSTS_PRTINT | + GINTSTS_OEPINT | GINTSTS_IEPINT | GINTSTS_GOUTNAKEFF | + GINTSTS_GINNAKEFF | GINTSTS_NPTXFEMP | GINTSTS_RXFLVL | + GINTSTS_OTGINT | GINTSTS_CURMODE_HOST); + iflg = 1; + break; + case GINTMSK: + iflg = 1; + break; + default: + break; + } + + trace_usb_dwc2_glbreg_write(addr, glbregnm[index], orig, old, val); + *mmio = val; + + if (iflg) { + dwc2_update_irq(s); + } +} + +static uint64_t dwc2_fszreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr == HPTXFSIZ); + val = s->fszreg[index]; + + trace_usb_dwc2_fszreg_read(addr, val); + return val; +} + +static void dwc2_fszreg_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + + assert(addr == HPTXFSIZ); + mmio = &s->fszreg[index]; + old = *mmio; + + trace_usb_dwc2_fszreg_write(addr, orig, old, val); + *mmio = val; +} + +static const char *hreg0nm[] = { + "HCFG ", "HFIR ", "HFNUM ", "<rsvd> ", "HPTXSTS ", + "HAINT ", "HAINTMSK ", "HFLBADDR ", "<rsvd> ", "<rsvd> ", + "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", + "<rsvd> ", "HPRT0 " +}; + +static uint64_t dwc2_hreg0_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= HCFG && addr <= HPRT0); + val = s->hreg0[index]; + + switch (addr) { + case HFNUM: + val = (dwc2_get_frame_remaining(s) << HFNUM_FRREM_SHIFT) | + (s->hfnum << HFNUM_FRNUM_SHIFT); + break; + default: + break; + } + + trace_usb_dwc2_hreg0_read(addr, hreg0nm[index], val); + return val; +} + +static void dwc2_hreg0_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + USBDevice *dev = s->uport.dev; + uint64_t orig = val; + uint32_t *mmio; + uint32_t tval, told, old; + int prst = 0; + int iflg = 0; + + assert(addr >= HCFG && addr <= HPRT0); + mmio = &s->hreg0[index]; + old = *mmio; + + switch (addr) { + case HFIR: + break; + case HFNUM: + case HPTXSTS: + case HAINT: + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", + __func__); + return; + case HAINTMSK: + val &= 0xffff; + break; + case HPRT0: + /* don't allow clearing of read-only bits */ + val |= old & (HPRT0_SPD_MASK | HPRT0_LNSTS_MASK | HPRT0_OVRCURRACT | + HPRT0_CONNSTS); + /* don't allow clearing of self-clearing bits */ + val |= old & (HPRT0_SUSP | HPRT0_RES); + /* don't allow setting of self-setting bits */ + if (!(old & HPRT0_ENA) && (val & HPRT0_ENA)) { + val &= ~HPRT0_ENA; + } + /* clear the write-1-to-clear bits */ + tval = val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + told = old & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + tval |= ~told; + tval = ~tval; + tval &= (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + val &= ~(HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + val |= tval; + if (!(val & HPRT0_RST) && (old & HPRT0_RST)) { + if (dev && dev->attached) { + val |= HPRT0_ENA | HPRT0_ENACHG; + prst = 1; + } + } + if (val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_CONNDET)) { + iflg = 1; + } else { + iflg = -1; + } + break; + default: + break; + } + + if (prst) { + trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, + val & ~HPRT0_CONNDET); + trace_usb_dwc2_hreg0_action("call usb_port_reset"); + usb_port_reset(&s->uport); + val &= ~HPRT0_CONNDET; + } else { + trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, val); + } + + *mmio = val; + + if (iflg > 0) { + trace_usb_dwc2_hreg0_action("enable PRTINT"); + dwc2_raise_global_irq(s, GINTSTS_PRTINT); + } else if (iflg < 0) { + trace_usb_dwc2_hreg0_action("disable PRTINT"); + dwc2_lower_global_irq(s, GINTSTS_PRTINT); + } +} + +static const char *hreg1nm[] = { + "HCCHAR ", "HCSPLT ", "HCINT ", "HCINTMSK", "HCTSIZ ", "HCDMA ", + "<rsvd> ", "HCDMAB " +}; + +static uint64_t dwc2_hreg1_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); + val = s->hreg1[index]; + + trace_usb_dwc2_hreg1_read(addr, hreg1nm[index & 7], addr >> 5, val); + return val; +} + +static void dwc2_hreg1_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + int iflg = 0; + int enflg = 0; + int disflg = 0; + + assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); + mmio = &s->hreg1[index]; + old = *mmio; + + switch (HSOTG_REG(0x500) + (addr & 0x1c)) { + case HCCHAR(0): + if ((val & HCCHAR_CHDIS) && !(old & HCCHAR_CHDIS)) { + val &= ~(HCCHAR_CHENA | HCCHAR_CHDIS); + disflg = 1; + } else { + val |= old & HCCHAR_CHDIS; + if ((val & HCCHAR_CHENA) && !(old & HCCHAR_CHENA)) { + val &= ~HCCHAR_CHDIS; + enflg = 1; + } else { + val |= old & HCCHAR_CHENA; + } + } + break; + case HCINT(0): + /* clear the write-1-to-clear bits */ + val |= ~old; + val = ~val; + val &= ~HCINTMSK_RESERVED14_31; + iflg = 1; + break; + case HCINTMSK(0): + val &= ~HCINTMSK_RESERVED14_31; + iflg = 1; + break; + case HCDMAB(0): + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", + __func__); + return; + default: + break; + } + + trace_usb_dwc2_hreg1_write(addr, hreg1nm[index & 7], index >> 3, orig, + old, val); + *mmio = val; + + if (disflg) { + /* set ChHltd in HCINT */ + s->hreg1[(index & ~7) + 2] |= HCINTMSK_CHHLTD; + iflg = 1; + } + + if (enflg) { + dwc2_enable_chan(s, index & ~7); + } + + if (iflg) { + dwc2_update_hc_irq(s, index & ~7); + } +} + +static const char *pcgregnm[] = { + "PCGCTL ", "PCGCCTL1 " +}; + +static uint64_t dwc2_pcgreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= PCGCTL && addr <= PCGCCTL1); + val = s->pcgreg[index]; + + trace_usb_dwc2_pcgreg_read(addr, pcgregnm[index], val); + return val; +} + +static void dwc2_pcgreg_write(void *ptr, hwaddr addr, int index, + uint64_t val, unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + + assert(addr >= PCGCTL && addr <= PCGCCTL1); + mmio = &s->pcgreg[index]; + old = *mmio; + + trace_usb_dwc2_pcgreg_write(addr, pcgregnm[index], orig, old, val); + *mmio = val; +} + +static uint64_t dwc2_hsotg_read(void *ptr, hwaddr addr, unsigned size) +{ + uint64_t val; + + switch (addr) { + case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): + val = dwc2_glbreg_read(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, size); + break; + case HSOTG_REG(0x100): + val = dwc2_fszreg_read(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, size); + break; + case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): + /* Gadget-mode registers, just return 0 for now */ + val = 0; + break; + case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): + val = dwc2_hreg0_read(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, size); + break; + case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): + val = dwc2_hreg1_read(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, size); + break; + case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): + /* Gadget-mode registers, just return 0 for now */ + val = 0; + break; + case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): + val = dwc2_pcgreg_read(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, size); + break; + default: + g_assert_not_reached(); + } + + return val; +} + +static void dwc2_hsotg_write(void *ptr, hwaddr addr, uint64_t val, + unsigned size) +{ + switch (addr) { + case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): + dwc2_glbreg_write(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, val, size); + break; + case HSOTG_REG(0x100): + dwc2_fszreg_write(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, val, size); + break; + case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): + /* Gadget-mode registers, do nothing for now */ + break; + case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): + dwc2_hreg0_write(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, val, size); + break; + case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): + dwc2_hreg1_write(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, val, size); + break; + case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): + /* Gadget-mode registers, do nothing for now */ + break; + case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): + dwc2_pcgreg_write(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, val, size); + break; + default: + g_assert_not_reached(); + } +} + +static const MemoryRegionOps dwc2_mmio_hsotg_ops = { + .read = dwc2_hsotg_read, + .write = dwc2_hsotg_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static uint64_t dwc2_hreg2_read(void *ptr, hwaddr addr, unsigned size) +{ + /* TODO - implement FIFOs to support slave mode */ + trace_usb_dwc2_hreg2_read(addr, addr >> 12, 0); + qemu_log_mask(LOG_UNIMP, "FIFO read not implemented\n"); + return 0; +} + +static void dwc2_hreg2_write(void *ptr, hwaddr addr, uint64_t val, + unsigned size) +{ + uint64_t orig = val; + + /* TODO - implement FIFOs to support slave mode */ + trace_usb_dwc2_hreg2_write(addr, addr >> 12, orig, 0, val); + qemu_log_mask(LOG_UNIMP, "FIFO write not implemented\n"); +} + +static const MemoryRegionOps dwc2_mmio_hreg2_ops = { + .read = dwc2_hreg2_read, + .write = dwc2_hreg2_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void dwc2_wakeup_endpoint(USBBus *bus, USBEndpoint *ep, + unsigned int stream) +{ + DWC2State *s = container_of(bus, DWC2State, bus); + + trace_usb_dwc2_wakeup_endpoint(ep, stream); + + /* TODO - do something here? */ + qemu_bh_schedule(s->async_bh); +} + +static USBBusOps dwc2_bus_ops = { + .wakeup_endpoint = dwc2_wakeup_endpoint, +}; + +static void dwc2_work_timer(void *opaque) +{ + DWC2State *s = opaque; + + trace_usb_dwc2_work_timer(); + qemu_bh_schedule(s->async_bh); +} + +static void dwc2_reset_enter(Object *obj, ResetType type) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + int i; + + trace_usb_dwc2_reset_enter(); + + if (c->parent_phases.enter) { + c->parent_phases.enter(obj, type); + } + + timer_del(s->frame_timer); + qemu_bh_cancel(s->async_bh); + + if (s->uport.dev && s->uport.dev->attached) { + usb_detach(&s->uport); + } + + dwc2_bus_stop(s); + + s->gotgctl = GOTGCTL_BSESVLD | GOTGCTL_ASESVLD | GOTGCTL_CONID_B; + s->gotgint = 0; + s->gahbcfg = 0; + s->gusbcfg = 5 << GUSBCFG_USBTRDTIM_SHIFT; + s->grstctl = GRSTCTL_AHBIDLE; + s->gintsts = GINTSTS_CONIDSTSCHNG | GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | + GINTSTS_CURMODE_HOST; + s->gintmsk = 0; + s->grxstsr = 0; + s->grxstsp = 0; + s->grxfsiz = 1024; + s->gnptxfsiz = 1024 << FIFOSIZE_DEPTH_SHIFT; + s->gnptxsts = (4 << FIFOSIZE_DEPTH_SHIFT) | 1024; + s->gi2cctl = GI2CCTL_I2CDATSE0 | GI2CCTL_ACK; + s->gpvndctl = 0; + s->ggpio = 0; + s->guid = 0; + s->gsnpsid = 0x4f54294a; + s->ghwcfg1 = 0; + s->ghwcfg2 = (8 << GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT) | + (4 << GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT) | + (4 << GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT) | + GHWCFG2_DYNAMIC_FIFO | + GHWCFG2_PERIO_EP_SUPPORTED | + ((DWC2_NB_CHAN - 1) << GHWCFG2_NUM_HOST_CHAN_SHIFT) | + (GHWCFG2_INT_DMA_ARCH << GHWCFG2_ARCHITECTURE_SHIFT) | + (GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST << GHWCFG2_OP_MODE_SHIFT); + s->ghwcfg3 = (4096 << GHWCFG3_DFIFO_DEPTH_SHIFT) | + (4 << GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT) | + (4 << GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT); + s->ghwcfg4 = 0; + s->glpmcfg = 0; + s->gpwrdn = GPWRDN_PWRDNRSTN; + s->gdfifocfg = 0; + s->gadpctl = 0; + s->grefclk = 0; + s->gintmsk2 = 0; + s->gintsts2 = 0; + + s->hptxfsiz = 500 << FIFOSIZE_DEPTH_SHIFT; + + s->hcfg = 2 << HCFG_RESVALID_SHIFT; + s->hfir = 60000; + s->hfnum = 0x3fff; + s->hptxsts = (16 << TXSTS_QSPCAVAIL_SHIFT) | 32768; + s->haint = 0; + s->haintmsk = 0; + s->hprt0 = 0; + + memset(s->hreg1, 0, sizeof(s->hreg1)); + memset(s->pcgreg, 0, sizeof(s->pcgreg)); + + s->sof_time = 0; + s->frame_number = 0; + s->fi = USB_FRMINTVL - 1; + s->next_chan = 0; + s->working = false; + + for (i = 0; i < DWC2_NB_CHAN; i++) { + s->packet[i].needs_service = false; + } +} + +static void dwc2_reset_hold(Object *obj) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + + trace_usb_dwc2_reset_hold(); + + if (c->parent_phases.hold) { + c->parent_phases.hold(obj); + } + + dwc2_update_irq(s); +} + +static void dwc2_reset_exit(Object *obj) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + + trace_usb_dwc2_reset_exit(); + + if (c->parent_phases.exit) { + c->parent_phases.exit(obj); + } + + s->hprt0 = HPRT0_PWR; + if (s->uport.dev && s->uport.dev->attached) { + usb_attach(&s->uport); + usb_device_reset(s->uport.dev); + } +} + +static void dwc2_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + DWC2State *s = DWC2_USB(dev); + Object *obj; + Error *err = NULL; + + obj = object_property_get_link(OBJECT(dev), "dma-mr", &err); + if (err) { + error_setg(errp, "dwc2: required dma-mr link not found: %s", + error_get_pretty(err)); + return; + } + assert(obj != NULL); + + s->dma_mr = MEMORY_REGION(obj); + address_space_init(&s->dma_as, s->dma_mr, "dwc2"); + + usb_bus_new(&s->bus, sizeof(s->bus), &dwc2_bus_ops, dev); + usb_register_port(&s->bus, &s->uport, s, 0, &dwc2_port_ops, + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL | + (s->usb_version == 2 ? USB_SPEED_MASK_HIGH : 0)); + s->uport.dev = 0; + + s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ + } else { + s->usb_bit_time = 1; + } + + s->fi = USB_FRMINTVL - 1; + s->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_frame_boundary, s); + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_work_timer, s); + s->async_bh = qemu_bh_new(dwc2_work_bh, s); + + sysbus_init_irq(sbd, &s->irq); +} + +static void dwc2_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DWC2State *s = DWC2_USB(obj); + + memory_region_init(&s->container, obj, "dwc2", DWC2_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->container); + + memory_region_init_io(&s->hsotg, obj, &dwc2_mmio_hsotg_ops, s, + "dwc2-io", 4 * KiB); + memory_region_add_subregion(&s->container, 0x0000, &s->hsotg); + + memory_region_init_io(&s->fifos, obj, &dwc2_mmio_hreg2_ops, s, + "dwc2-fifo", 64 * KiB); + memory_region_add_subregion(&s->container, 0x1000, &s->fifos); +} + +static const VMStateDescription vmstate_dwc2_state_packet = { + .name = "dwc2/packet", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(devadr, DWC2Packet), + VMSTATE_UINT32(epnum, DWC2Packet), + VMSTATE_UINT32(epdir, DWC2Packet), + VMSTATE_UINT32(mps, DWC2Packet), + VMSTATE_UINT32(pid, DWC2Packet), + VMSTATE_UINT32(index, DWC2Packet), + VMSTATE_UINT32(pcnt, DWC2Packet), + VMSTATE_UINT32(len, DWC2Packet), + VMSTATE_INT32(async, DWC2Packet), + VMSTATE_BOOL(small, DWC2Packet), + VMSTATE_BOOL(needs_service, DWC2Packet), + VMSTATE_END_OF_LIST() + }, +}; + +const VMStateDescription vmstate_dwc2_state = { + .name = "dwc2", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(glbreg, DWC2State, + DWC2_GLBREG_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(fszreg, DWC2State, + DWC2_FSZREG_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(hreg0, DWC2State, + DWC2_HREG0_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(hreg1, DWC2State, + DWC2_HREG1_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(pcgreg, DWC2State, + DWC2_PCGREG_SIZE / sizeof(uint32_t)), + + VMSTATE_TIMER_PTR(eof_timer, DWC2State), + VMSTATE_TIMER_PTR(frame_timer, DWC2State), + VMSTATE_INT64(sof_time, DWC2State), + VMSTATE_INT64(usb_frame_time, DWC2State), + VMSTATE_INT64(usb_bit_time, DWC2State), + VMSTATE_UINT32(usb_version, DWC2State), + VMSTATE_UINT16(frame_number, DWC2State), + VMSTATE_UINT16(fi, DWC2State), + VMSTATE_UINT16(next_chan, DWC2State), + VMSTATE_BOOL(working, DWC2State), + + VMSTATE_STRUCT_ARRAY(packet, DWC2State, DWC2_NB_CHAN, 1, + vmstate_dwc2_state_packet, DWC2Packet), + VMSTATE_UINT8_2DARRAY(usb_buf, DWC2State, DWC2_NB_CHAN, + DWC2_MAX_XFER_SIZE), + + VMSTATE_END_OF_LIST() + } +}; + +static Property dwc2_usb_properties[] = { + DEFINE_PROP_UINT32("usb_version", DWC2State, usb_version, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void dwc2_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + DWC2Class *c = DWC2_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->realize = dwc2_realize; + dc->vmsd = &vmstate_dwc2_state; + set_bit(DEVICE_CATEGORY_USB, dc->categories); + device_class_set_props(dc, dwc2_usb_properties); + resettable_class_set_parent_phases(rc, dwc2_reset_enter, dwc2_reset_hold, + dwc2_reset_exit, &c->parent_phases); +} + +static const TypeInfo dwc2_usb_type_info = { + .name = TYPE_DWC2_USB, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(DWC2State), + .instance_init = dwc2_init, + .class_size = sizeof(DWC2Class), + .class_init = dwc2_class_init, +}; + +static void dwc2_usb_register_types(void) +{ + type_register_static(&dwc2_usb_type_info); +} + +type_init(dwc2_usb_register_types) diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Kconfig +++ b/hw/usb/Kconfig @@ -XXX,XX +XXX,XX @@ config USB_MUSB bool select USB +config USB_DWC2 + bool + default y + select USB + config TUSB6010 bool select USB_MUSB diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Makefile.objs +++ b/hw/usb/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_USB_EHCI_SYSBUS) += hcd-ehci-sysbus.o common-obj-$(CONFIG_USB_XHCI) += hcd-xhci.o common-obj-$(CONFIG_USB_XHCI_NEC) += hcd-xhci-nec.o common-obj-$(CONFIG_USB_MUSB) += hcd-musb.o +common-obj-$(CONFIG_USB_DWC2) += hcd-dwc2.o common-obj-$(CONFIG_TUSB6010) += tusb6010.o common-obj-$(CONFIG_IMX) += chipidea.o diff --git a/hw/usb/trace-events b/hw/usb/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/trace-events +++ b/hw/usb/trace-events @@ -XXX,XX +XXX,XX @@ usb_xhci_xfer_error(void *xfer, uint32_t ret) "%p: ret %d" usb_xhci_unimplemented(const char *item, int nr) "%s (0x%x)" usb_xhci_enforced_limit(const char *item) "%s" +# hcd-dwc2.c +usb_dwc2_update_irq(uint32_t level) "level=%d" +usb_dwc2_raise_global_irq(uint32_t intr) "0x%08x" +usb_dwc2_lower_global_irq(uint32_t intr) "0x%08x" +usb_dwc2_raise_host_irq(uint32_t intr) "0x%04x" +usb_dwc2_lower_host_irq(uint32_t intr) "0x%04x" +usb_dwc2_sof(int64_t next) "next SOF %" PRId64 +usb_dwc2_bus_start(void) "start SOFs" +usb_dwc2_bus_stop(void) "stop SOFs" +usb_dwc2_find_device(uint8_t addr) "%d" +usb_dwc2_port_disabled(uint32_t pnum) "port %d disabled" +usb_dwc2_device_found(uint32_t pnum) "device found on port %d" +usb_dwc2_device_not_found(void) "device not found" +usb_dwc2_handle_packet(uint32_t chan, void *dev, void *pkt, uint32_t ep, const char *type, const char *dir, uint32_t mps, uint32_t len, uint32_t pcnt) "ch %d dev %p pkt %p ep %d type %s dir %s mps %d len %d pcnt %d" +usb_dwc2_memory_read(uint32_t addr, uint32_t len) "addr %d len %d" +usb_dwc2_packet_status(const char *status, uint32_t len) "status %s len %d" +usb_dwc2_packet_error(const char *status) "ERROR %s" +usb_dwc2_async_packet(void *pkt, uint32_t chan, void *dev, uint32_t ep, const char *dir, uint32_t len) "pkt %p ch %d dev %p ep %d %s len %d" +usb_dwc2_memory_write(uint32_t addr, uint32_t len) "addr %d len %d" +usb_dwc2_packet_done(const char *status, uint32_t actual, uint32_t len, uint32_t pcnt) "status %s actual %d len %d pcnt %d" +usb_dwc2_packet_next(const char *status, uint32_t len, uint32_t pcnt) "status %s len %d pcnt %d" +usb_dwc2_attach(void *port) "port %p" +usb_dwc2_attach_speed(const char *speed) "%s-speed device attached" +usb_dwc2_detach(void *port) "port %p" +usb_dwc2_child_detach(void *port, void *child) "port %p child %p" +usb_dwc2_wakeup(void *port) "port %p" +usb_dwc2_async_packet_complete(void *port, void *pkt, uint32_t chan, void *dev, uint32_t ep, const char *dir, uint32_t len) "port %p packet %p ch %d dev %p ep %d %s len %d" +usb_dwc2_work_bh(void) "" +usb_dwc2_work_bh_service(uint32_t first, uint32_t current, void *dev, uint32_t ep) "first %d servicing %d dev %p ep %d" +usb_dwc2_work_bh_next(uint32_t chan) "next %d" +usb_dwc2_enable_chan(uint32_t chan, void *dev, void *pkt, uint32_t ep) "ch %d dev %p pkt %p ep %d" +usb_dwc2_glbreg_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_glbreg_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_fszreg_read(uint64_t addr, uint32_t val) " 0x%04" PRIx64 " HPTXFSIZ val 0x%08x" +usb_dwc2_fszreg_write(uint64_t addr, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " HPTXFSIZ val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg0_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_hreg0_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg1_read(uint64_t addr, const char *reg, uint64_t chan, uint32_t val) " 0x%04" PRIx64 " %s%" PRId64 " val 0x%08x" +usb_dwc2_hreg1_write(uint64_t addr, const char *reg, uint64_t chan, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " %s%" PRId64 " val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_pcgreg_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_pcgreg_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg2_read(uint64_t addr, uint64_t fifo, uint32_t val) " 0x%04" PRIx64 " FIFO%" PRId64 " val 0x%08x" +usb_dwc2_hreg2_write(uint64_t addr, uint64_t fifo, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " FIFO%" PRId64 " val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg0_action(const char *s) "%s" +usb_dwc2_wakeup_endpoint(void *ep, uint32_t stream) "endp %p stream %d" +usb_dwc2_work_timer(void) "" +usb_dwc2_reset_enter(void) "=== RESET enter ===" +usb_dwc2_reset_hold(void) "=== RESET hold ===" +usb_dwc2_reset_exit(void) "=== RESET exit ===" + # desc.c usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d" usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d" -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> The dwc-hsotg (dwc2) USB host depends on a short packet to indicate the end of an IN transfer. The usb-storage driver currently doesn't provide this, so fix it. I have tested this change rather extensively using a PC emulation with xhci, ehci, and uhci controllers, and have not observed any regressions. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-6-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/dev-storage.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/usb/dev-storage.c b/hw/usb/dev-storage.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-storage.c +++ b/hw/usb/dev-storage.c @@ -XXX,XX +XXX,XX @@ static void usb_msd_copy_data(MSDState *s, USBPacket *p) usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len); s->scsi_len -= len; s->scsi_off += len; + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->scsi_len == 0 || s->data_len == 0) { scsi_req_continue(s->req); @@ -XXX,XX +XXX,XX @@ static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t r if (s->data_len) { int len = (p->iov.size - p->actual_length); usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; } if (s->data_len == 0) { @@ -XXX,XX +XXX,XX @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) int len = p->iov.size - p->actual_length; if (len) { usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->data_len == 0) { s->mode = USB_MSDM_CSW; @@ -XXX,XX +XXX,XX @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) int len = p->iov.size - p->actual_length; if (len) { usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->data_len == 0) { s->mode = USB_MSDM_CSW; } } } - if (p->actual_length < p->iov.size) { + if (p->actual_length < p->iov.size && (p->short_not_ok || + s->scsi_len >= p->ep->max_packet_size)) { DPRINTF("Deferring packet %p [wait data-in]\n", p); s->packet = p; p->status = USB_RET_ASYNC; -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Wire the dwc-hsotg (dwc2) emulation into Qemu Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-7-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 3 ++- hw/arm/bcm2835_peripherals.c | 21 ++++++++++++++++++++- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/bcm2835_sdhost.h" #include "hw/gpio/bcm2835_gpio.h" #include "hw/timer/bcm2835_systmr.h" +#include "hw/usb/hcd-dwc2.h" #include "hw/misc/unimp.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { UnimplementedDeviceState ave0; UnimplementedDeviceState bscsl; UnimplementedDeviceState smi; - UnimplementedDeviceState dwc2; + DWC2State dwc2; UnimplementedDeviceState sdramc; } BCM2835PeripheralState; diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) /* Mphi */ sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi), TYPE_BCM2835_MPHI); + + /* DWC2 */ + sysbus_init_child_obj(obj, "dwc2", &s->dwc2, sizeof(s->dwc2), + TYPE_DWC2_USB); + + object_property_add_const_link(OBJECT(&s->dwc2), "dma-mr", + OBJECT(&s->gpu_bus_mr)); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, INTERRUPT_HOSTPORT)); + /* DWC2 */ + object_property_set_bool(OBJECT(&s->dwc2), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, USB_OTG_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dwc2), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->dwc2), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_USB)); + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->otp, "bcm2835-otp", OTP_OFFSET, 0x80); create_unimp(s, &s->dbus, "bcm2835-dbus", DBUS_OFFSET, 0x8000); create_unimp(s, &s->ave0, "bcm2835-ave0", AVE0_OFFSET, 0x8000); - create_unimp(s, &s->dwc2, "dwc-usb2", USB_OTG_OFFSET, 0x1000); create_unimp(s, &s->sdramc, "bcm2835-sdramc", SDRAMC_OFFSET, 0x100); } -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add a check for functional dwc-hsotg (dwc2) USB host emulation to the Raspi 2 acceptance test Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-8-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(LinuxKernelTest): self.vm.set_console() kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + - serial_kernel_cmdline[uart_id]) + serial_kernel_cmdline[uart_id] + + ' root=/dev/mmcblk0p2 rootwait ' + + 'dwc_otg.fiq_fsm_enable=0') self.vm.add_args('-kernel', kernel_path, '-dtb', dtb_path, - '-append', kernel_command_line) + '-append', kernel_command_line, + '-device', 'usb-kbd') self.vm.launch() console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + console_pattern = 'Product: QEMU USB Keyboard' + self.wait_for_console_pattern(console_pattern) def test_arm_raspi2_uart0(self): """ -- 2.20.1 Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-2-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 25 ++++++++++++++++++++++ target/arm/translate-neon.inc.c | 38 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 18 +++++++--------- 3 files changed, 71 insertions(+), 10 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VRECPS_fp_3s 1111 001 0 0 . 0 . .... .... 1111 ... 1 .... @3same_fp VRSQRTS_fp_3s 1111 001 0 0 . 1 . .... .... 1111 ... 1 .... @3same_fp VMAXNM_fp_3s 1111 001 1 0 . 0 . .... .... 1111 ... 1 .... @3same_fp VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp + +###################################################################### +# 2-reg-and-shift grouping: +# 1111 001 U 1 D immH:3 immL:3 Vd:4 opc:4 L Q M 1 Vm:4 +###################################################################### +&2reg_shift vm vd q shift size + +@2reg_shl_d .... ... . . . shift:6 .... .... 1 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 +@2reg_shl_s .... ... . . . 1 shift:5 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 +@2reg_shl_h .... ... . . . 01 shift:4 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 +@2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 + +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b + +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_3same_fp_pair(DisasContext *s, arg_3same *a, VFPGen3OpSPFn *fn) DO_3S_FP_PAIR(VPADD, gen_helper_vfp_adds) DO_3S_FP_PAIR(VPMAX, gen_helper_vfp_maxs) DO_3S_FP_PAIR(VPMIN, gen_helper_vfp_mins) + +static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) +{ + /* Handle a 2-reg-shift insn which can be vectorized. */ + int vec_size = a->q ? 16 : 8; + int rd_ofs = neon_reg_offset(a->vd, 0); + int rm_ofs = neon_reg_offset(a->vm, 0); + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fn(a->size, rd_ofs, rm_ofs, a->shift, vec_size, vec_size); + return true; +} + +#define DO_2SH(INSN, FUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_vector_2sh(s, a, FUNC); \ + } \ + +DO_2SH(VSHL, tcg_gen_gvec_shli) +DO_2SH(VSLI, gen_gvec_sli) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if ((insn & 0x00380080) != 0) { /* Two registers and shift. */ op = (insn >> 8) & 0xf; + + switch (op) { + case 5: /* VSHL, VSLI */ + return 1; /* handled by decodetree */ + default: + break; + } + if (insn & (1 << 7)) { /* 64-bit shift. */ if (op > 7) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) gen_gvec_sri(size, rd_ofs, rm_ofs, shift, vec_size, vec_size); return 0; - - case 5: /* VSHL, VSLI */ - if (u) { /* VSLI */ - gen_gvec_sli(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { /* VSHL */ - tcg_gen_gvec_shli(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; } if (size == 3) { -- 2.20.1 Convert the VSHR 2-reg-shift insns to decodetree. Note that unlike the legacy decoder, we present the right shift amount to the trans_ function as a positive integer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-3-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 25 ++++++++++++++++++++ target/arm/translate-neon.inc.c | 41 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 21 +---------------- 3 files changed, 67 insertions(+), 20 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp ###################################################################### &2reg_shift vm vd q shift size +# Right shifts are encoded as N - shift, where N is the element size in bits. +%neon_rshift_i6 16:6 !function=rsub_64 +%neon_rshift_i5 16:5 !function=rsub_32 +%neon_rshift_i4 16:4 !function=rsub_16 +%neon_rshift_i3 16:3 !function=rsub_8 + +@2reg_shr_d .... ... . . . ...... .... .... 1 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 shift=%neon_rshift_i6 +@2reg_shr_s .... ... . . . 1 ..... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 shift=%neon_rshift_i5 +@2reg_shr_h .... ... . . . 01 .... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 shift=%neon_rshift_i4 +@2reg_shr_b .... ... . . . 001 ... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i3 + @2reg_shl_d .... ... . . . shift:6 .... .... 1 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=3 @2reg_shl_s .... ... . . . 1 shift:5 .... .... 0 q:1 . . .... \ @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b + +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b + VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static inline int plus1(DisasContext *s, int x) return x + 1; } +static inline int rsub_64(DisasContext *s, int x) +{ + return 64 - x; +} + +static inline int rsub_32(DisasContext *s, int x) +{ + return 32 - x; +} +static inline int rsub_16(DisasContext *s, int x) +{ + return 16 - x; +} +static inline int rsub_8(DisasContext *s, int x) +{ + return 8 - x; +} + /* Include the generated Neon decoder */ #include "decode-neon-dp.inc.c" #include "decode-neon-ls.inc.c" @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) DO_2SH(VSHL, tcg_gen_gvec_shli) DO_2SH(VSLI, gen_gvec_sli) + +static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a) +{ + /* Signed shift out of range results in all-sign-bits */ + a->shift = MIN(a->shift, (8 << a->size) - 1); + return do_vector_2sh(s, a, tcg_gen_gvec_sari); +} + +static void gen_zero_rd_2sh(unsigned vece, uint32_t rd_ofs, uint32_t rm_ofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(vece, rd_ofs, oprsz, maxsz, 0); +} + +static bool trans_VSHR_U_2sh(DisasContext *s, arg_2reg_shift *a) +{ + /* Shift out of range is architecturally valid and results in zero. */ + if (a->shift >= (8 << a->size)) { + return do_vector_2sh(s, a, gen_zero_rd_2sh); + } else { + return do_vector_2sh(s, a, tcg_gen_gvec_shri); + } +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) op = (insn >> 8) & 0xf; switch (op) { + case 0: /* VSHR */ case 5: /* VSHL, VSLI */ return 1; /* handled by decodetree */ default: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } switch (op) { - case 0: /* VSHR */ - /* Right shift comes here negative. */ - shift = -shift; - /* Shifts larger than the element size are architecturally - * valid. Unsigned results in all zeros; signed results - * in all sign bits. - */ - if (!u) { - tcg_gen_gvec_sari(size, rd_ofs, rm_ofs, - MIN(shift, (8 << size) - 1), - vec_size, vec_size); - } else if (shift >= 8 << size) { - tcg_gen_gvec_dup_imm(MO_8, rd_ofs, vec_size, - vec_size, 0); - } else { - tcg_gen_gvec_shri(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - case 1: /* VSRA */ /* Right shift comes here negative. */ shift = -shift; -- 2.20.1 Convert the VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree. (These are the last instructions in the group that are vectorized; the rest all require looping over each element.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-4-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 35 ++++++++++++++++++++++ target/arm/translate-neon.inc.c | 7 +++++ target/arm/translate.c | 52 +++------------------------------ 3 files changed, 46 insertions(+), 48 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_d +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_s +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_h +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_b + +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_d +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_s +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_h +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_b + +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_d +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_s +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_h +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_b + +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_d +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_s +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_h +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_b + +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_d +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_s +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_h +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_b + +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_d +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_s +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_h +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_b + +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_d +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_s +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_h +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_b + VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) DO_2SH(VSHL, tcg_gen_gvec_shli) DO_2SH(VSLI, gen_gvec_sli) +DO_2SH(VSRI, gen_gvec_sri) +DO_2SH(VSRA_S, gen_gvec_ssra) +DO_2SH(VSRA_U, gen_gvec_usra) +DO_2SH(VRSHR_S, gen_gvec_srshr) +DO_2SH(VRSHR_U, gen_gvec_urshr) +DO_2SH(VRSRA_S, gen_gvec_srsra) +DO_2SH(VRSRA_U, gen_gvec_ursra) static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) switch (op) { case 0: /* VSHR */ + case 1: /* VSRA */ + case 2: /* VRSHR */ + case 3: /* VRSRA */ + case 4: /* VSRI */ case 5: /* VSHL, VSLI */ return 1; /* handled by decodetree */ default: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) shift = shift - (1 << (size + 3)); } - switch (op) { - case 1: /* VSRA */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_usra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_ssra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 2: /* VRSHR */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_urshr(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_srshr(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 3: /* VRSRA */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_ursra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_srsra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 4: /* VSRI */ - if (!u) { - return 1; - } - /* Right shift comes here negative. */ - shift = -shift; - gen_gvec_sri(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - return 0; - } - if (size == 3) { count = q + 1; } else { -- 2.20.1 Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree. These are the last of the simple shift-by-immediate insns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-5-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 15 +++++ target/arm/translate-neon.inc.c | 108 +++++++++++++++++++++++++++++++ target/arm/translate.c | 110 +------------------------------- 3 files changed, 126 insertions(+), 107 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b + +VQSHLU_64_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_d +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_s +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_h +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_b + +VQSHL_S_64_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b + +VQSHL_U_64_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHR_U_2sh(DisasContext *s, arg_2reg_shift *a) return do_vector_2sh(s, a, tcg_gen_gvec_shri); } } + +static bool do_2shift_env_64(DisasContext *s, arg_2reg_shift *a, + NeonGenTwo64OpEnvFn *fn) +{ + /* + * 2-reg-and-shift operations, size == 3 case, where the + * function needs to be passed cpu_env. + */ + TCGv_i64 constimm; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * To avoid excessive duplication of ops we implement shift + * by immediate using the variable shift operations. + */ + constimm = tcg_const_i64(dup_const(a->size, a->shift)); + + for (pass = 0; pass < a->q + 1; pass++) { + TCGv_i64 tmp = tcg_temp_new_i64(); + + neon_load_reg64(tmp, a->vm + pass); + fn(tmp, cpu_env, tmp, constimm); + neon_store_reg64(tmp, a->vd + pass); + } + tcg_temp_free_i64(constimm); + return true; +} + +static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoOpEnvFn *fn) +{ + /* + * 2-reg-and-shift operations, size < 3 case, where the + * helper needs to be passed cpu_env. + */ + TCGv_i32 constimm; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * To avoid excessive duplication of ops we implement shift + * by immediate using the variable shift operations. + */ + constimm = tcg_const_i32(dup_const(a->size, a->shift)); + + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + fn(tmp, cpu_env, tmp, constimm); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_i32(constimm); + return true; +} + +#define DO_2SHIFT_ENV(INSN, FUNC) \ + static bool trans_##INSN##_64_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_env_64(s, a, gen_helper_neon_##FUNC##64); \ + } \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + static NeonGenTwoOpEnvFn * const fns[] = { \ + gen_helper_neon_##FUNC##8, \ + gen_helper_neon_##FUNC##16, \ + gen_helper_neon_##FUNC##32, \ + }; \ + assert(a->size < ARRAY_SIZE(fns)); \ + return do_2shift_env_32(s, a, fns[a->size]); \ + } + +DO_2SHIFT_ENV(VQSHLU, qshlu_s) +DO_2SHIFT_ENV(VQSHL_U, qshl_u) +DO_2SHIFT_ENV(VQSHL_S, qshl_s) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_rsb(int size, TCGv_i32 t0, TCGv_i32 t1) } } -#define GEN_NEON_INTEGER_OP_ENV(name) do { \ - switch ((size << 1) | u) { \ - case 0: \ - gen_helper_neon_##name##_s8(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 1: \ - gen_helper_neon_##name##_u8(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 2: \ - gen_helper_neon_##name##_s16(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 3: \ - gen_helper_neon_##name##_u16(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 4: \ - gen_helper_neon_##name##_s32(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 5: \ - gen_helper_neon_##name##_u32(tmp, cpu_env, tmp, tmp2); \ - break; \ - default: return 1; \ - }} while (0) - static TCGv_i32 neon_load_scratch(int scratch) { TCGv_i32 tmp = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int size; int shift; int pass; - int count; int u; int vec_size; uint32_t imm; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 3: /* VRSRA */ case 4: /* VSRI */ case 5: /* VSHL, VSLI */ + case 6: /* VQSHLU */ + case 7: /* VQSHL */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op < 8) { - /* Shift by immediate: - VSHR, VSRA, VRSHR, VRSRA, VSRI, VSHL, VQSHL, VQSHLU. */ - if (q && ((rd | rm) & 1)) { - return 1; - } - if (!u && (op == 4 || op == 6)) { - return 1; - } - /* Right shifts are encoded as N - shift, where N is the - element size in bits. */ - if (op <= 4) { - shift = shift - (1 << (size + 3)); - } - - if (size == 3) { - count = q + 1; - } else { - count = q ? 4: 2; - } - - /* To avoid excessive duplication of ops we implement shift - * by immediate using the variable shift operations. - */ - imm = dup_const(size, shift); - - for (pass = 0; pass < count; pass++) { - if (size == 3) { - neon_load_reg64(cpu_V0, rm + pass); - tcg_gen_movi_i64(cpu_V1, imm); - switch (op) { - case 6: /* VQSHLU */ - gen_helper_neon_qshlu_s64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - break; - case 7: /* VQSHL */ - if (u) { - gen_helper_neon_qshl_u64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - } else { - gen_helper_neon_qshl_s64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - } - break; - default: - g_assert_not_reached(); - } - neon_store_reg64(cpu_V0, rd + pass); - } else { /* size < 3 */ - /* Operands in T0 and T1. */ - tmp = neon_load_reg(rm, pass); - tmp2 = tcg_temp_new_i32(); - tcg_gen_movi_i32(tmp2, imm); - switch (op) { - case 6: /* VQSHLU */ - switch (size) { - case 0: - gen_helper_neon_qshlu_s8(tmp, cpu_env, - tmp, tmp2); - break; - case 1: - gen_helper_neon_qshlu_s16(tmp, cpu_env, - tmp, tmp2); - break; - case 2: - gen_helper_neon_qshlu_s32(tmp, cpu_env, - tmp, tmp2); - break; - default: - abort(); - } - break; - case 7: /* VQSHL */ - GEN_NEON_INTEGER_OP_ENV(qshl); - break; - default: - g_assert_not_reached(); - } - tcg_temp_free_i32(tmp2); - neon_store_reg(rd, pass, tmp); - } - } /* for pass */ - } else if (op < 10) { + if (op < 10) { /* Shift by immediate and narrow: VSHRN, VRSHRN, VQSHRN, VQRSHRN. */ int input_unsigned = (op == 8) ? !u : u; -- 2.20.1 Convert the Neon narrowing shifts where op==8 to decodetree: * VSHRN * VRSHRN * VQSHRUN * VQRSHRUN Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-6-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 27 ++++++ target/arm/translate-neon.inc.c | 167 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 1 + 3 files changed, 195 insertions(+) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 +# Narrowing right shifts: here the Q bit is part of the opcode decode +@2reg_shrn_d .... ... . . . 1 ..... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 q=0 \ + shift=%neon_rshift_i5 +@2reg_shrn_s .... ... . . . 01 .... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 q=0 \ + shift=%neon_rshift_i4 +@2reg_shrn_h .... ... . . . 001 ... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 \ + shift=%neon_rshift_i3 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VQSHL_U_64_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b + +VSHRN_64_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_d +VSHRN_32_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_s +VSHRN_16_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h + +VRSHRN_64_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d +VRSHRN_32_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s +VRSHRN_16_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h + +VQSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_d +VQSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_s +VQSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h + +VQRSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d +VQRSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s +VQRSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, DO_2SHIFT_ENV(VQSHLU, qshlu_s) DO_2SHIFT_ENV(VQSHL_U, qshl_u) DO_2SHIFT_ENV(VQSHL_S, qshl_s) + +static bool do_2shift_narrow_64(DisasContext *s, arg_2reg_shift *a, + NeonGenTwo64OpFn *shiftfn, + NeonGenNarrowEnvFn *narrowfn) +{ + /* 2-reg-and-shift narrowing-shift operations, size == 3 case */ + TCGv_i64 constimm, rm1, rm2; + TCGv_i32 rd; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is always a right shift, and the shiftfn is always a + * left-shift helper, which thus needs the negated shift count. + */ + constimm = tcg_const_i64(-a->shift); + rm1 = tcg_temp_new_i64(); + rm2 = tcg_temp_new_i64(); + + /* Load both inputs first to avoid potential overwrite if rm == rd */ + neon_load_reg64(rm1, a->vm); + neon_load_reg64(rm2, a->vm + 1); + + shiftfn(rm1, rm1, constimm); + rd = tcg_temp_new_i32(); + narrowfn(rd, cpu_env, rm1); + neon_store_reg(a->vd, 0, rd); + + shiftfn(rm2, rm2, constimm); + rd = tcg_temp_new_i32(); + narrowfn(rd, cpu_env, rm2); + neon_store_reg(a->vd, 1, rd); + + tcg_temp_free_i64(rm1); + tcg_temp_free_i64(rm2); + tcg_temp_free_i64(constimm); + + return true; +} + +static bool do_2shift_narrow_32(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoOpFn *shiftfn, + NeonGenNarrowEnvFn *narrowfn) +{ + /* 2-reg-and-shift narrowing-shift operations, size < 3 case */ + TCGv_i32 constimm, rm1, rm2, rm3, rm4; + TCGv_i64 rtmp; + uint32_t imm; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is always a right shift, and the shiftfn is always a + * left-shift helper, which thus needs the negated shift count + * duplicated into each lane of the immediate value. + */ + if (a->size == 1) { + imm = (uint16_t)(-a->shift); + imm |= imm << 16; + } else { + /* size == 2 */ + imm = -a->shift; + } + constimm = tcg_const_i32(imm); + + /* Load all inputs first to avoid potential overwrite */ + rm1 = neon_load_reg(a->vm, 0); + rm2 = neon_load_reg(a->vm, 1); + rm3 = neon_load_reg(a->vm + 1, 0); + rm4 = neon_load_reg(a->vm + 1, 1); + rtmp = tcg_temp_new_i64(); + + shiftfn(rm1, rm1, constimm); + shiftfn(rm2, rm2, constimm); + + tcg_gen_concat_i32_i64(rtmp, rm1, rm2); + tcg_temp_free_i32(rm2); + + narrowfn(rm1, cpu_env, rtmp); + neon_store_reg(a->vd, 0, rm1); + + shiftfn(rm3, rm3, constimm); + shiftfn(rm4, rm4, constimm); + tcg_temp_free_i32(constimm); + + tcg_gen_concat_i32_i64(rtmp, rm3, rm4); + tcg_temp_free_i32(rm4); + + narrowfn(rm3, cpu_env, rtmp); + tcg_temp_free_i64(rtmp); + neon_store_reg(a->vd, 1, rm3); + return true; +} + +#define DO_2SN_64(INSN, FUNC, NARROWFUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_narrow_64(s, a, FUNC, NARROWFUNC); \ + } +#define DO_2SN_32(INSN, FUNC, NARROWFUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_narrow_32(s, a, FUNC, NARROWFUNC); \ + } + +static void gen_neon_narrow_u32(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + tcg_gen_extrl_i64_i32(dest, src); +} + +static void gen_neon_narrow_u16(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + gen_helper_neon_narrow_u16(dest, src); +} + +static void gen_neon_narrow_u8(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + gen_helper_neon_narrow_u8(dest, src); +} + +DO_2SN_64(VSHRN_64, gen_ushl_i64, gen_neon_narrow_u32) +DO_2SN_32(VSHRN_32, gen_ushl_i32, gen_neon_narrow_u16) +DO_2SN_32(VSHRN_16, gen_helper_neon_shl_u16, gen_neon_narrow_u8) + +DO_2SN_64(VRSHRN_64, gen_helper_neon_rshl_u64, gen_neon_narrow_u32) +DO_2SN_32(VRSHRN_32, gen_helper_neon_rshl_u32, gen_neon_narrow_u16) +DO_2SN_32(VRSHRN_16, gen_helper_neon_rshl_u16, gen_neon_narrow_u8) + +DO_2SN_64(VQSHRUN_64, gen_sshl_i64, gen_helper_neon_unarrow_sat32) +DO_2SN_32(VQSHRUN_32, gen_sshl_i32, gen_helper_neon_unarrow_sat16) +DO_2SN_32(VQSHRUN_16, gen_helper_neon_shl_s16, gen_helper_neon_unarrow_sat8) + +DO_2SN_64(VQRSHRUN_64, gen_helper_neon_rshl_s64, gen_helper_neon_unarrow_sat32) +DO_2SN_32(VQRSHRUN_32, gen_helper_neon_rshl_s32, gen_helper_neon_unarrow_sat16) +DO_2SN_32(VQRSHRUN_16, gen_helper_neon_rshl_s16, gen_helper_neon_unarrow_sat8) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 5: /* VSHL, VSLI */ case 6: /* VQSHLU */ case 7: /* VQSHL */ + case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ return 1; /* handled by decodetree */ default: break; -- 2.20.1 Convert the remaining Neon narrowing shifts to decodetree: * VQSHRN * VQRSHRN Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-7-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 20 ++++++ target/arm/translate-neon.inc.c | 15 +++++ target/arm/translate.c | 110 +------------------------------- 3 files changed, 37 insertions(+), 108 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VQSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h VQRSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d VQRSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s VQRSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h + +# VQSHRN with signed input +VQSHRN_S64_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_d +VQSHRN_S32_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_s +VQSHRN_S16_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h + +# VQRSHRN with signed input +VQRSHRN_S64_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d +VQRSHRN_S32_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s +VQRSHRN_S16_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h + +# VQSHRN with unsigned input +VQSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_d +VQSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_s +VQSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h + +# VQRSHRN with unsigned input +VQRSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d +VQRSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s +VQRSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2SN_32(VQSHRUN_16, gen_helper_neon_shl_s16, gen_helper_neon_unarrow_sat8) DO_2SN_64(VQRSHRUN_64, gen_helper_neon_rshl_s64, gen_helper_neon_unarrow_sat32) DO_2SN_32(VQRSHRUN_32, gen_helper_neon_rshl_s32, gen_helper_neon_unarrow_sat16) DO_2SN_32(VQRSHRUN_16, gen_helper_neon_rshl_s16, gen_helper_neon_unarrow_sat8) +DO_2SN_64(VQSHRN_S64, gen_sshl_i64, gen_helper_neon_narrow_sat_s32) +DO_2SN_32(VQSHRN_S32, gen_sshl_i32, gen_helper_neon_narrow_sat_s16) +DO_2SN_32(VQSHRN_S16, gen_helper_neon_shl_s16, gen_helper_neon_narrow_sat_s8) + +DO_2SN_64(VQRSHRN_S64, gen_helper_neon_rshl_s64, gen_helper_neon_narrow_sat_s32) +DO_2SN_32(VQRSHRN_S32, gen_helper_neon_rshl_s32, gen_helper_neon_narrow_sat_s16) +DO_2SN_32(VQRSHRN_S16, gen_helper_neon_rshl_s16, gen_helper_neon_narrow_sat_s8) + +DO_2SN_64(VQSHRN_U64, gen_ushl_i64, gen_helper_neon_narrow_sat_u32) +DO_2SN_32(VQSHRN_U32, gen_ushl_i32, gen_helper_neon_narrow_sat_u16) +DO_2SN_32(VQSHRN_U16, gen_helper_neon_shl_u16, gen_helper_neon_narrow_sat_u8) + +DO_2SN_64(VQRSHRN_U64, gen_helper_neon_rshl_u64, gen_helper_neon_narrow_sat_u32) +DO_2SN_32(VQRSHRN_U32, gen_helper_neon_rshl_u32, gen_helper_neon_narrow_sat_u16) +DO_2SN_32(VQRSHRN_U16, gen_helper_neon_rshl_u16, gen_helper_neon_narrow_sat_u8) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_unarrow_sats(int size, TCGv_i32 dest, TCGv_i64 src) } } -static inline void gen_neon_shift_narrow(int size, TCGv_i32 var, TCGv_i32 shift, - int q, int u) -{ - if (q) { - if (u) { - switch (size) { - case 1: gen_helper_neon_rshl_u16(var, var, shift); break; - case 2: gen_helper_neon_rshl_u32(var, var, shift); break; - default: abort(); - } - } else { - switch (size) { - case 1: gen_helper_neon_rshl_s16(var, var, shift); break; - case 2: gen_helper_neon_rshl_s32(var, var, shift); break; - default: abort(); - } - } - } else { - if (u) { - switch (size) { - case 1: gen_helper_neon_shl_u16(var, var, shift); break; - case 2: gen_ushl_i32(var, var, shift); break; - default: abort(); - } - } else { - switch (size) { - case 1: gen_helper_neon_shl_s16(var, var, shift); break; - case 2: gen_sshl_i32(var, var, shift); break; - default: abort(); - } - } - } -} - static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) { if (u) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 6: /* VQSHLU */ case 7: /* VQSHL */ case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ + case 9: /* VQSHRN, VQRSHRN */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op < 10) { - /* Shift by immediate and narrow: - VSHRN, VRSHRN, VQSHRN, VQRSHRN. */ - int input_unsigned = (op == 8) ? !u : u; - if (rm & 1) { - return 1; - } - shift = shift - (1 << (size + 3)); - size++; - if (size == 3) { - tmp64 = tcg_const_i64(shift); - neon_load_reg64(cpu_V0, rm); - neon_load_reg64(cpu_V1, rm + 1); - for (pass = 0; pass < 2; pass++) { - TCGv_i64 in; - if (pass == 0) { - in = cpu_V0; - } else { - in = cpu_V1; - } - if (q) { - if (input_unsigned) { - gen_helper_neon_rshl_u64(cpu_V0, in, tmp64); - } else { - gen_helper_neon_rshl_s64(cpu_V0, in, tmp64); - } - } else { - if (input_unsigned) { - gen_ushl_i64(cpu_V0, in, tmp64); - } else { - gen_sshl_i64(cpu_V0, in, tmp64); - } - } - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == 8, u, size - 1, tmp, cpu_V0); - neon_store_reg(rd, pass, tmp); - } /* for pass */ - tcg_temp_free_i64(tmp64); - } else { - if (size == 1) { - imm = (uint16_t)shift; - imm |= imm << 16; - } else { - /* size == 2 */ - imm = (uint32_t)shift; - } - tmp2 = tcg_const_i32(imm); - tmp4 = neon_load_reg(rm + 1, 0); - tmp5 = neon_load_reg(rm + 1, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 0) { - tmp = neon_load_reg(rm, 0); - } else { - tmp = tmp4; - } - gen_neon_shift_narrow(size, tmp, tmp2, q, - input_unsigned); - if (pass == 0) { - tmp3 = neon_load_reg(rm, 1); - } else { - tmp3 = tmp5; - } - gen_neon_shift_narrow(size, tmp3, tmp2, q, - input_unsigned); - tcg_gen_concat_i32_i64(cpu_V0, tmp, tmp3); - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(tmp3); - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == 8, u, size - 1, tmp, cpu_V0); - neon_store_reg(rd, pass, tmp); - } /* for pass */ - tcg_temp_free_i32(tmp2); - } - } else if (op == 10) { + if (op == 10) { /* VSHLL, VMOVL */ if (q || (rd & 1)) { return 1; -- 2.20.1 Convert the VSHLL and VMOVL insns from the 2-reg-shift group to decodetree. Since the loop always has two passes, we unroll it to avoid the awkward reassignment of one TCGv to another. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-8-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 16 +++++++ target/arm/translate-neon.inc.c | 81 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 46 +------------------ 3 files changed, 99 insertions(+), 44 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 \ shift=%neon_rshift_i3 +# Long left shifts: again Q is part of opcode decode +@2reg_shll_s .... ... . . . 1 shift:5 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 q=0 +@2reg_shll_h .... ... . . . 01 shift:4 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 +@2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VQSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h VQRSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d VQRSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s VQRSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h + +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b + +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2SN_32(VQSHRN_U16, gen_helper_neon_shl_u16, gen_helper_neon_narrow_sat_u8) DO_2SN_64(VQRSHRN_U64, gen_helper_neon_rshl_u64, gen_helper_neon_narrow_sat_u32) DO_2SN_32(VQRSHRN_U32, gen_helper_neon_rshl_u32, gen_helper_neon_narrow_sat_u16) DO_2SN_32(VQRSHRN_U16, gen_helper_neon_rshl_u16, gen_helper_neon_narrow_sat_u8) + +static bool do_vshll_2sh(DisasContext *s, arg_2reg_shift *a, + NeonGenWidenFn *widenfn, bool u) +{ + TCGv_i64 tmp; + TCGv_i32 rm0, rm1; + uint64_t widen_mask = 0; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vd & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is a widen-and-shift operation. The shift is always less + * than the width of the source type, so after widening the input + * vector we can simply shift the whole 64-bit widened register, + * and then clear the potential overflow bits resulting from left + * bits of the narrow input appearing as right bits of the left + * neighbour narrow input. Calculate a mask of bits to clear. + */ + if ((a->shift != 0) && (a->size < 2 || u)) { + int esize = 8 << a->size; + widen_mask = MAKE_64BIT_MASK(0, esize); + widen_mask >>= esize - a->shift; + widen_mask = dup_const(a->size + 1, widen_mask); + } + + rm0 = neon_load_reg(a->vm, 0); + rm1 = neon_load_reg(a->vm, 1); + tmp = tcg_temp_new_i64(); + + widenfn(tmp, rm0); + if (a->shift != 0) { + tcg_gen_shli_i64(tmp, tmp, a->shift); + tcg_gen_andi_i64(tmp, tmp, ~widen_mask); + } + neon_store_reg64(tmp, a->vd); + + widenfn(tmp, rm1); + if (a->shift != 0) { + tcg_gen_shli_i64(tmp, tmp, a->shift); + tcg_gen_andi_i64(tmp, tmp, ~widen_mask); + } + neon_store_reg64(tmp, a->vd + 1); + tcg_temp_free_i64(tmp); + return true; +} + +static bool trans_VSHLL_S_2sh(DisasContext *s, arg_2reg_shift *a) +{ + NeonGenWidenFn *widenfn[] = { + gen_helper_neon_widen_s8, + gen_helper_neon_widen_s16, + tcg_gen_ext_i32_i64, + }; + return do_vshll_2sh(s, a, widenfn[a->size], false); +} + +static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) +{ + NeonGenWidenFn *widenfn[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + }; + return do_vshll_2sh(s, a, widenfn[a->size], true); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 7: /* VQSHL */ case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ case 9: /* VQSHRN, VQRSHRN */ + case 10: /* VSHLL, including VMOVL */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op == 10) { - /* VSHLL, VMOVL */ - if (q || (rd & 1)) { - return 1; - } - tmp = neon_load_reg(rm, 0); - tmp2 = neon_load_reg(rm, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 1) - tmp = tmp2; - - gen_neon_widen(cpu_V0, tmp, size, u); - - if (shift != 0) { - /* The shift is less than the width of the source - type, so we can just shift the whole register. */ - tcg_gen_shli_i64(cpu_V0, cpu_V0, shift); - /* Widen the result of shift: we need to clear - * the potential overflow bits resulting from - * left bits of the narrow input appearing as - * right bits of left the neighbour narrow - * input. */ - if (size < 2 || !u) { - uint64_t imm64; - if (size == 0) { - imm = (0xffu >> (8 - shift)); - imm |= imm << 16; - } else if (size == 1) { - imm = 0xffff >> (16 - shift); - } else { - /* size == 2 */ - imm = 0xffffffff >> (32 - shift); - } - if (size < 2) { - imm64 = imm | (((uint64_t)imm) << 32); - } else { - imm64 = imm; - } - tcg_gen_andi_i64(cpu_V0, cpu_V0, ~imm64); - } - } - neon_store_reg64(cpu_V0, rd + pass); - } - } else if (op >= 14) { + if (op >= 14) { /* VCVT fixed-point. */ TCGv_ptr fpst; TCGv_i32 shiftv; -- 2.20.1 Convert the VCVT fixed-point conversion operations in the Neon 2-regs-and-shift group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-9-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 11 +++++ target/arm/translate-neon.inc.c | 49 +++++++++++++++++++++ target/arm/translate.c | 75 +-------------------------------- 3 files changed, 62 insertions(+), 73 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0 +# We use size=0 for fp32 and size=1 for fp16 to match the 3-same encodings. +@2reg_vcvt .... ... . . . 1 ..... .... .... . q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i5 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b + +# VCVT fixed<->float conversions +# TODO: FP16 fixed<->float conversions are opc==0b1100 and 0b1101 +VCVT_SF_2sh 1111 001 0 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt +VCVT_UF_2sh 1111 001 1 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt +VCVT_FS_2sh 1111 001 0 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt +VCVT_FU_2sh 1111 001 1 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) }; return do_vshll_2sh(s, a, widenfn[a->size], true); } + +static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoSingleOPFn *fn) +{ + /* FP operations in 2-reg-and-shift group */ + TCGv_i32 tmp, shiftv; + TCGv_ptr fpstatus; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpstatus = get_fpstatus_ptr(1); + shiftv = tcg_const_i32(a->shift); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + tmp = neon_load_reg(a->vm, pass); + fn(tmp, tmp, shiftv, fpstatus); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_ptr(fpstatus); + tcg_temp_free_i32(shiftv); + return true; +} + +#define DO_FP_2SH(INSN, FUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_fp_2sh(s, a, FUNC); \ + } + +DO_FP_2SH(VCVT_SF, gen_helper_vfp_sltos) +DO_FP_2SH(VCVT_UF, gen_helper_vfp_ultos) +DO_FP_2SH(VCVT_FS, gen_helper_vfp_tosls_round_to_zero) +DO_FP_2SH(VCVT_FU, gen_helper_vfp_touls_round_to_zero) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int q; int rd, rn, rm, rd_ofs, rn_ofs, rm_ofs; int size; - int shift; int pass; int u; int vec_size; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } else if (insn & (1 << 4)) { if ((insn & 0x00380080) != 0) { - /* Two registers and shift. */ - op = (insn >> 8) & 0xf; - - switch (op) { - case 0: /* VSHR */ - case 1: /* VSRA */ - case 2: /* VRSHR */ - case 3: /* VRSRA */ - case 4: /* VSRI */ - case 5: /* VSHL, VSLI */ - case 6: /* VQSHLU */ - case 7: /* VQSHL */ - case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ - case 9: /* VQSHRN, VQRSHRN */ - case 10: /* VSHLL, including VMOVL */ - return 1; /* handled by decodetree */ - default: - break; - } - - if (insn & (1 << 7)) { - /* 64-bit shift. */ - if (op > 7) { - return 1; - } - size = 3; - } else { - size = 2; - while ((insn & (1 << (size + 19))) == 0) - size--; - } - shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op >= 14) { - /* VCVT fixed-point. */ - TCGv_ptr fpst; - TCGv_i32 shiftv; - VFPGenFixPointFn *fn; - - if (!(insn & (1 << 21)) || (q && ((rd | rm) & 1))) { - return 1; - } - - if (!(op & 1)) { - if (u) { - fn = gen_helper_vfp_ultos; - } else { - fn = gen_helper_vfp_sltos; - } - } else { - if (u) { - fn = gen_helper_vfp_touls_round_to_zero; - } else { - fn = gen_helper_vfp_tosls_round_to_zero; - } - } - - /* We have already masked out the must-be-1 top bit of imm6, - * hence this 32-shift where the ARM ARM has 64-imm6. - */ - shift = 32 - shift; - fpst = get_fpstatus_ptr(1); - shiftv = tcg_const_i32(shift); - for (pass = 0; pass < (q ? 4 : 2); pass++) { - TCGv_i32 tmpf = neon_load_reg(rm, pass); - fn(tmpf, tmpf, shiftv, fpst); - neon_store_reg(rd, pass, tmpf); - } - tcg_temp_free_ptr(fpst); - tcg_temp_free_i32(shiftv); - } else { - return 1; - } + /* Two registers and shift: handled by decodetree */ + return 1; } else { /* (insn & 0x00380080) == 0 */ int invert, reg_ofs, vec_size; -- 2.20.1 Convert the insns in the one-register-and-immediate group to decodetree. In the new decode, our asimd_imm_const() function returns a 64-bit value rather than a 32-bit one, which means we don't need to treat cmode=14 op=1 as a special case in the decoder (it is the only encoding where the two halves of the 64-bit value are different). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-10-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 22 ++++++ target/arm/translate-neon.inc.c | 118 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 101 +-------------------------- 3 files changed, 142 insertions(+), 99 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VCVT_SF_2sh 1111 001 0 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt VCVT_UF_2sh 1111 001 1 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt VCVT_FS_2sh 1111 001 0 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt VCVT_FU_2sh 1111 001 1 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt + +###################################################################### +# 1-reg-and-modified-immediate grouping: +# 1111 001 i 1 D 000 imm:3 Vd:4 cmode:4 0 Q op 1 Vm:4 +###################################################################### + +&1reg_imm vd q imm cmode op + +%asimd_imm_value 24:1 16:3 0:4 + +@1reg_imm .... ... . . . ... ... .... .... . q:1 . . .... \ + &1reg_imm imm=%asimd_imm_value vd=%vd_dp + +# The cmode/op bits here decode VORR/VBIC/VMOV/VMNV, but +# not in a way we can conveniently represent in decodetree without +# a lot of repetition: +# VORR: op=0, (cmode & 1) && cmode < 12 +# VBIC: op=1, (cmode & 1) && cmode < 12 +# VMOV: everything else +# So we have a single decode line and check the cmode/op in the +# trans function. +Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_FP_2SH(VCVT_SF, gen_helper_vfp_sltos) DO_FP_2SH(VCVT_UF, gen_helper_vfp_ultos) DO_FP_2SH(VCVT_FS, gen_helper_vfp_tosls_round_to_zero) DO_FP_2SH(VCVT_FU, gen_helper_vfp_touls_round_to_zero) + +static uint64_t asimd_imm_const(uint32_t imm, int cmode, int op) +{ + /* + * Expand the encoded constant. + * Note that cmode = 2,3,4,5,6,7,10,11,12,13 imm=0 is UNPREDICTABLE. + * We choose to not special-case this and will behave as if a + * valid constant encoding of 0 had been given. + * cmode = 15 op = 1 must UNDEF; we assume decode has handled that. + */ + switch (cmode) { + case 0: case 1: + /* no-op */ + break; + case 2: case 3: + imm <<= 8; + break; + case 4: case 5: + imm <<= 16; + break; + case 6: case 7: + imm <<= 24; + break; + case 8: case 9: + imm |= imm << 16; + break; + case 10: case 11: + imm = (imm << 8) | (imm << 24); + break; + case 12: + imm = (imm << 8) | 0xff; + break; + case 13: + imm = (imm << 16) | 0xffff; + break; + case 14: + if (op) { + /* + * This is the only case where the top and bottom 32 bits + * of the encoded constant differ. + */ + uint64_t imm64 = 0; + int n; + + for (n = 0; n < 8; n++) { + if (imm & (1 << n)) { + imm64 |= (0xffULL << (n * 8)); + } + } + return imm64; + } + imm |= (imm << 8) | (imm << 16) | (imm << 24); + break; + case 15: + imm = ((imm & 0x80) << 24) | ((imm & 0x3f) << 19) + | ((imm & 0x40) ? (0x1f << 25) : (1 << 30)); + break; + } + if (op) { + imm = ~imm; + } + return dup_const(MO_32, imm); +} + +static bool do_1reg_imm(DisasContext *s, arg_1reg_imm *a, + GVecGen2iFn *fn) +{ + uint64_t imm; + int reg_ofs, vec_size; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { + return false; + } + + if (a->vd & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + reg_ofs = neon_reg_offset(a->vd, 0); + vec_size = a->q ? 16 : 8; + imm = asimd_imm_const(a->imm, a->cmode, a->op); + + fn(MO_64, reg_ofs, reg_ofs, imm, vec_size, vec_size); + return true; +} + +static void gen_VMOV_1r(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t c, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(MO_64, dofs, oprsz, maxsz, c); +} + +static bool trans_Vimm_1r(DisasContext *s, arg_1reg_imm *a) +{ + /* Handle decode of cmode/op here between VORR/VBIC/VMOV */ + GVecGen2iFn *fn; + + if ((a->cmode & 1) && a->cmode < 12) { + /* for op=1, the imm will be inverted, so BIC becomes AND. */ + fn = a->op ? tcg_gen_gvec_andi : tcg_gen_gvec_ori; + } else { + /* There is one unallocated cmode/op combination in this space */ + if (a->cmode == 15 && a->op == 1) { + return false; + } + fn = gen_VMOV_1r; + } + return do_1reg_imm(s, a, fn); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) /* Three register same length: handled by decodetree */ return 1; } else if (insn & (1 << 4)) { - if ((insn & 0x00380080) != 0) { - /* Two registers and shift: handled by decodetree */ - return 1; - } else { /* (insn & 0x00380080) == 0 */ - int invert, reg_ofs, vec_size; - - if (q && (rd & 1)) { - return 1; - } - - op = (insn >> 8) & 0xf; - /* One register and immediate. */ - imm = (u << 7) | ((insn >> 12) & 0x70) | (insn & 0xf); - invert = (insn & (1 << 5)) != 0; - /* Note that op = 2,3,4,5,6,7,10,11,12,13 imm=0 is UNPREDICTABLE. - * We choose to not special-case this and will behave as if a - * valid constant encoding of 0 had been given. - */ - switch (op) { - case 0: case 1: - /* no-op */ - break; - case 2: case 3: - imm <<= 8; - break; - case 4: case 5: - imm <<= 16; - break; - case 6: case 7: - imm <<= 24; - break; - case 8: case 9: - imm |= imm << 16; - break; - case 10: case 11: - imm = (imm << 8) | (imm << 24); - break; - case 12: - imm = (imm << 8) | 0xff; - break; - case 13: - imm = (imm << 16) | 0xffff; - break; - case 14: - imm |= (imm << 8) | (imm << 16) | (imm << 24); - if (invert) { - imm = ~imm; - } - break; - case 15: - if (invert) { - return 1; - } - imm = ((imm & 0x80) << 24) | ((imm & 0x3f) << 19) - | ((imm & 0x40) ? (0x1f << 25) : (1 << 30)); - break; - } - if (invert) { - imm = ~imm; - } - - reg_ofs = neon_reg_offset(rd, 0); - vec_size = q ? 16 : 8; - - if (op & 1 && op < 12) { - if (invert) { - /* The immediate value has already been inverted, - * so BIC becomes AND. - */ - tcg_gen_gvec_andi(MO_32, reg_ofs, reg_ofs, imm, - vec_size, vec_size); - } else { - tcg_gen_gvec_ori(MO_32, reg_ofs, reg_ofs, imm, - vec_size, vec_size); - } - } else { - /* VMOV, VMVN. */ - if (op == 14 && invert) { - TCGv_i64 t64 = tcg_temp_new_i64(); - - for (pass = 0; pass <= q; ++pass) { - uint64_t val = 0; - int n; - - for (n = 0; n < 8; n++) { - if (imm & (1 << (n + pass * 8))) { - val |= 0xffull << (n * 8); - } - } - tcg_gen_movi_i64(t64, val); - neon_store_reg64(t64, rd + pass); - } - tcg_temp_free_i64(t64); - } else { - tcg_gen_gvec_dup_imm(MO_32, reg_ofs, vec_size, - vec_size, imm); - } - } - } + /* Two registers and shift or reg and imm: handled by decodetree */ + return 1; } else { /* (insn & 0x00800010 == 0x00800000) */ if (size != 3) { op = (insn >> 8) & 0xf; -- 2.20.1 Last minute pullreq for arm related patches; quite large because there were several series that only just made it through code review in time. thanks -- PMM The following changes since commit 091e3e3dbc499d84c004e1c50bc9870af37f6e99: Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-10-26' into staging (2020-10-26 22:36:35 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201027-1 for you to fetch changes up to 32bd322a0134ed89db00f2b9b3894982db3dedcb: hw/timer/armv7m_systick: Rewrite to use ptimers (2020-10-27 11:15:31 +0000) ---------------------------------------------------------------- target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer ---------------------------------------------------------------- Dr. David Alan Gilbert (1): arm/trace: Fix hex printing Hao Wu (1): hw/timer: Adding watchdog for NPCM7XX Timer. Havard Skinnemoen (4): Move npcm7xx_timer_reached_zero call out of npcm7xx_timer_pause hw/misc: Add npcm7xx random number generator hw/arm/npcm7xx: Add EHCI and OHCI controllers hw/gpio: Add GPIO model for Nuvoton NPCM7xx Luc Michel (14): hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro hw/core/clock: trace clock values in Hz instead of ns hw/arm/raspi: fix CPRMAN base address hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: add sane reset values to the registers hw/char/pl011: add a clock input hw/arm/bcm2835_peripherals: connect the UART clock Pavel Dovgalyuk (1): hw/arm: fix min_cpus for xlnx-versal-virt platform Peter Maydell (2): hw/core/ptimer: Support ptimer being disabled by timer callback hw/timer/armv7m_systick: Rewrite to use ptimers Philippe Mathieu-Daudé (10): linux-user/elfload: Avoid leaking interp_name using GLib memory API hw/arm/bcm2836: Restrict BCM283XInfo declaration to C source hw/arm/bcm2836: QOM'ify more by adding class_init() to each SoC type hw/arm/bcm2836: Introduce BCM283XClass::core_count hw/arm/bcm2836: Only provide "enabled-cpus" property to multicore SoCs hw/arm/bcm2836: Split out common realize() code hw/arm/bcm2836: Introduce the BCM2835 SoC hw/arm/raspi: Add the Raspberry Pi A+ machine hw/arm/raspi: Add the Raspberry Pi Zero machine hw/arm/raspi: Add the Raspberry Pi 3 model A+ Richard Henderson (11): linux-user/aarch64: Reset btype for signals linux-user: Set PAGE_TARGET_1 for TARGET_PROT_BTI include/elf: Add defines related to GNU property notes for AArch64 linux-user/elfload: Fix coding style in load_elf_image linux-user/elfload: Adjust iteration over phdr linux-user/elfload: Move PT_INTERP detection to first loop linux-user/elfload: Use Error for load_elf_image linux-user/elfload: Use Error for load_elf_interp linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes linux-user/elfload: Parse GNU_PROPERTY_AARCH64_FEATURE_1_AND tests/tcg/aarch64: Add bti smoke tests Shashi Mallela (2): hw/watchdog: Implement SBSA watchdog device hw/arm/sbsa-ref: add SBSA watchdog device Thomas Huth (1): hw/arm/highbank: Silence warnings about missing fallthrough statements Zenghui Yu (1): hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly docs/system/arm/nuvoton.rst | 6 +- hw/usb/hcd-ehci.h | 1 + include/elf.h | 22 + include/exec/cpu-all.h | 2 + include/hw/arm/bcm2835_peripherals.h | 5 +- include/hw/arm/bcm2836.h | 9 +- include/hw/arm/npcm7xx.h | 8 + include/hw/arm/raspi_platform.h | 5 +- include/hw/char/pl011.h | 1 + include/hw/clock.h | 5 + include/hw/gpio/npcm7xx_gpio.h | 55 ++ include/hw/misc/bcm2835_cprman.h | 210 ++++++ include/hw/misc/bcm2835_cprman_internals.h | 1019 ++++++++++++++++++++++++++++ include/hw/misc/npcm7xx_clk.h | 2 + include/hw/misc/npcm7xx_rng.h | 34 + include/hw/timer/armv7m_systick.h | 3 +- include/hw/timer/npcm7xx_timer.h | 48 +- include/hw/watchdog/sbsa_gwdt.h | 79 +++ linux-user/qemu.h | 4 + linux-user/syscall_defs.h | 4 + target/arm/cpu.h | 5 + hw/arm/bcm2835_peripherals.c | 15 +- hw/arm/bcm2836.c | 182 +++-- hw/arm/highbank.c | 2 + hw/arm/npcm7xx.c | 126 +++- hw/arm/raspi.c | 41 ++ hw/arm/sbsa-ref.c | 23 + hw/arm/smmuv3.c | 1 + hw/arm/xlnx-versal-virt.c | 1 + hw/char/pl011.c | 45 ++ hw/core/clock.c | 6 +- hw/core/ptimer.c | 4 + hw/gpio/npcm7xx_gpio.c | 424 ++++++++++++ hw/misc/bcm2835_cprman.c | 808 ++++++++++++++++++++++ hw/misc/npcm7xx_clk.c | 28 + hw/misc/npcm7xx_rng.c | 180 +++++ hw/timer/armv7m_systick.c | 124 ++-- hw/timer/npcm7xx_timer.c | 270 ++++++-- hw/usb/hcd-ehci-sysbus.c | 19 + hw/watchdog/sbsa_gwdt.c | 293 ++++++++ linux-user/aarch64/signal.c | 10 +- linux-user/elfload.c | 326 +++++++-- linux-user/mmap.c | 16 + target/arm/translate-a64.c | 6 +- tests/qtest/npcm7xx_gpio-test.c | 385 +++++++++++ tests/qtest/npcm7xx_rng-test.c | 278 ++++++++ tests/qtest/npcm7xx_watchdog_timer-test.c | 319 +++++++++ tests/tcg/aarch64/bti-1.c | 62 ++ tests/tcg/aarch64/bti-2.c | 116 ++++ tests/tcg/aarch64/bti-crt.inc.c | 51 ++ MAINTAINERS | 1 + hw/arm/Kconfig | 1 + hw/arm/trace-events | 2 +- hw/char/trace-events | 1 + hw/core/trace-events | 4 +- hw/gpio/meson.build | 1 + hw/gpio/trace-events | 7 + hw/misc/meson.build | 2 + hw/misc/trace-events | 9 + hw/watchdog/Kconfig | 3 + hw/watchdog/meson.build | 1 + tests/qtest/meson.build | 6 +- tests/tcg/aarch64/Makefile.target | 10 + tests/tcg/configure.sh | 4 + 64 files changed, 5461 insertions(+), 279 deletions(-) create mode 100644 include/hw/gpio/npcm7xx_gpio.h create mode 100644 include/hw/misc/bcm2835_cprman.h create mode 100644 include/hw/misc/bcm2835_cprman_internals.h create mode 100644 include/hw/misc/npcm7xx_rng.h create mode 100644 include/hw/watchdog/sbsa_gwdt.h create mode 100644 hw/gpio/npcm7xx_gpio.c create mode 100644 hw/misc/bcm2835_cprman.c create mode 100644 hw/misc/npcm7xx_rng.c create mode 100644 hw/watchdog/sbsa_gwdt.c create mode 100644 tests/qtest/npcm7xx_gpio-test.c create mode 100644 tests/qtest/npcm7xx_rng-test.c create mode 100644 tests/qtest/npcm7xx_watchdog_timer-test.c create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-2.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c From: Richard Henderson <richard.henderson@linaro.org> The kernel sets btype for the signal handler as if for a call. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, + offsetof(struct target_rt_frame_record, tramp); } env->xregs[0] = usig; - env->xregs[31] = frame_addr; env->xregs[29] = frame_addr + fr_ofs; - env->pc = ka->_sa_handler; env->xregs[30] = return_addr; + env->xregs[31] = frame_addr; + env->pc = ka->_sa_handler; + + /* Invoke the signal handler as if by indirect call. */ + if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { + env->btype = 2; + } + if (info) { tswap_siginfo(&frame->info, info); env->xregs[1] = frame_addr + offsetof(struct target_rt_sigframe, info); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Transform the prot bit to a qemu internal page bit, and save it in the page tables. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 2 ++ linux-user/syscall_defs.h | 4 ++++ target/arm/cpu.h | 5 +++++ linux-user/mmap.c | 16 ++++++++++++++++ target/arm/translate-a64.c | 6 +++--- 5 files changed, 30 insertions(+), 3 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; /* FIXME: Code that sets/uses this is broken and needs to go away. */ #define PAGE_RESERVED 0x0020 #endif +/* Target-specific bits that will be used via page_get_flags(). */ +#define PAGE_TARGET_1 0x0080 #if defined(CONFIG_USER_ONLY) void page_dump(FILE *f); diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall_defs.h +++ b/linux-user/syscall_defs.h @@ -XXX,XX +XXX,XX @@ struct target_winsize { #define TARGET_PROT_SEM 0x08 #endif +#ifdef TARGET_AARCH64 +#define TARGET_PROT_BTI 0x10 +#endif + /* Common */ #define TARGET_MAP_SHARED 0x01 /* Share changes */ #define TARGET_MAP_PRIVATE 0x02 /* Changes are private */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) #define arm_tlb_bti_gp(x) (typecheck_memtxattrs(x)->target_tlb_bit0) #define arm_tlb_mte_tagged(x) (typecheck_memtxattrs(x)->target_tlb_bit1) +/* + * AArch64 usage of the PAGE_TARGET_* bits for linux-user. + */ +#define PAGE_BTI PAGE_TARGET_1 + /* * Naming convention for isar_feature functions: * Functions which test 32-bit ID registers should have _aa32_ in diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ static int validate_prot_to_pageflags(int *host_prot, int prot) *host_prot = (prot & (PROT_READ | PROT_WRITE)) | (prot & PROT_EXEC ? PROT_READ : 0); +#ifdef TARGET_AARCH64 + /* + * The PROT_BTI bit is only accepted if the cpu supports the feature. + * Since this is the unusual case, don't bother checking unless + * the bit has been requested. If set and valid, record the bit + * within QEMU's page_flags. + */ + if (prot & TARGET_PROT_BTI) { + ARMCPU *cpu = ARM_CPU(thread_cpu); + if (cpu_isar_feature(aa64_bti, cpu)) { + valid |= TARGET_PROT_BTI; + page_flags |= PAGE_BTI; + } + } +#endif + return prot & ~valid ? 0 : page_flags; } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_simd_fp(DisasContext *s, uint32_t insn) */ static bool is_guarded_page(CPUARMState *env, DisasContext *s) { -#ifdef CONFIG_USER_ONLY - return false; /* FIXME */ -#else uint64_t addr = s->base.pc_first; +#ifdef CONFIG_USER_ONLY + return page_get_flags(addr) & PAGE_BTI; +#else int mmu_idx = arm_to_core_mmu_idx(s->mmu_idx); unsigned int index = tlb_index(env, mmu_idx, addr); CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These are all of the defines required to parse GNU_PROPERTY_AARCH64_FEATURE_1_AND, copied from binutils. Other missing defines related to other GNU program headers and notes are elided for now. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/elf.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/include/elf.h b/include/elf.h index XXXXXXX..XXXXXXX 100644 --- a/include/elf.h +++ b/include/elf.h @@ -XXX,XX +XXX,XX @@ typedef int64_t Elf64_Sxword; #define PT_NOTE 4 #define PT_SHLIB 5 #define PT_PHDR 6 +#define PT_LOOS 0x60000000 +#define PT_HIOS 0x6fffffff #define PT_LOPROC 0x70000000 #define PT_HIPROC 0x7fffffff +#define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) + #define PT_MIPS_REGINFO 0x70000000 #define PT_MIPS_RTPROC 0x70000001 #define PT_MIPS_OPTIONS 0x70000002 @@ -XXX,XX +XXX,XX @@ typedef struct elf64_shdr { #define NT_ARM_SYSTEM_CALL 0x404 /* ARM system call number */ #define NT_ARM_SVE 0x405 /* ARM Scalable Vector Extension regs */ +/* Defined note types for GNU systems. */ + +#define NT_GNU_PROPERTY_TYPE_0 5 /* Program property */ + +/* Values used in GNU .note.gnu.property notes (NT_GNU_PROPERTY_TYPE_0). */ + +#define GNU_PROPERTY_STACK_SIZE 1 +#define GNU_PROPERTY_NO_COPY_ON_PROTECTED 2 + +#define GNU_PROPERTY_LOPROC 0xc0000000 +#define GNU_PROPERTY_HIPROC 0xdfffffff +#define GNU_PROPERTY_LOUSER 0xe0000000 +#define GNU_PROPERTY_HIUSER 0xffffffff + +#define GNU_PROPERTY_AARCH64_FEATURE_1_AND 0xc0000000 +#define GNU_PROPERTY_AARCH64_FEATURE_1_BTI (1u << 0) +#define GNU_PROPERTY_AARCH64_FEATURE_1_PAC (1u << 1) + /* * Physical entry point into the kernel. * -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Fix an unlikely memory leak in load_elf_image(). Fixes: bf858897b7 ("linux-user: Re-use load_elf_image for the main binary.") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-5-richard.henderson@linaro.org Message-Id: <20201003174944.1972444-1-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, info->brk = vaddr_em; } } else if (eppnt->p_type == PT_INTERP && pinterp_name) { - char *interp_name; + g_autofree char *interp_name = NULL; if (*pinterp_name) { errmsg = "Multiple PT_INTERP entries"; goto exit_errmsg; } - interp_name = malloc(eppnt->p_filesz); + interp_name = g_malloc(eppnt->p_filesz); if (!interp_name) { goto exit_perror; } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, errmsg = "Invalid PT_INTERP entry"; goto exit_errmsg; } - *pinterp_name = interp_name; + *pinterp_name = g_steal_pointer(&interp_name); #ifdef TARGET_MIPS } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; @@ -XXX,XX +XXX,XX @@ int load_elf_binary(struct linux_binprm *bprm, struct image_info *info) if (elf_interpreter) { info->load_bias = interp_info.load_bias; info->entry = interp_info.entry; - free(elf_interpreter); + g_free(elf_interpreter); } #ifdef USE_ELF_CORE_DUMP -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Fixing this now will clarify following patches. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-6-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, abi_ulong vaddr, vaddr_po, vaddr_ps, vaddr_ef, vaddr_em, vaddr_len; int elf_prot = 0; - if (eppnt->p_flags & PF_R) elf_prot = PROT_READ; - if (eppnt->p_flags & PF_W) elf_prot |= PROT_WRITE; - if (eppnt->p_flags & PF_X) elf_prot |= PROT_EXEC; + if (eppnt->p_flags & PF_R) { + elf_prot |= PROT_READ; + } + if (eppnt->p_flags & PF_W) { + elf_prot |= PROT_WRITE; + } + if (eppnt->p_flags & PF_X) { + elf_prot |= PROT_EXEC; + } vaddr = load_bias + eppnt->p_vaddr; vaddr_po = TARGET_ELF_PAGEOFFSET(vaddr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The second loop uses a loop induction variable, and the first does not. Transform the first to match the second, to simplify a following patch moving code between them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-7-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, loaddr = -1, hiaddr = 0; info->alignment = 0; for (i = 0; i < ehdr->e_phnum; ++i) { - if (phdr[i].p_type == PT_LOAD) { - abi_ulong a = phdr[i].p_vaddr - phdr[i].p_offset; + struct elf_phdr *eppnt = phdr + i; + if (eppnt->p_type == PT_LOAD) { + abi_ulong a = eppnt->p_vaddr - eppnt->p_offset; if (a < loaddr) { loaddr = a; } - a = phdr[i].p_vaddr + phdr[i].p_memsz; + a = eppnt->p_vaddr + eppnt->p_memsz; if (a > hiaddr) { hiaddr = a; } ++info->nsegs; - info->alignment |= phdr[i].p_align; + info->alignment |= eppnt->p_align; } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> For BTI, we need to know if the executable is static or dynamic, which means looking for PT_INTERP earlier. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 60 +++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 29 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, mmap_lock(); - /* Find the maximum size of the image and allocate an appropriate - amount of memory to handle that. */ + /* + * Find the maximum size of the image and allocate an appropriate + * amount of memory to handle that. Locate the interpreter, if any. + */ loaddr = -1, hiaddr = 0; info->alignment = 0; for (i = 0; i < ehdr->e_phnum; ++i) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, } ++info->nsegs; info->alignment |= eppnt->p_align; + } else if (eppnt->p_type == PT_INTERP && pinterp_name) { + g_autofree char *interp_name = NULL; + + if (*pinterp_name) { + errmsg = "Multiple PT_INTERP entries"; + goto exit_errmsg; + } + interp_name = g_malloc(eppnt->p_filesz); + if (!interp_name) { + goto exit_perror; + } + + if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { + memcpy(interp_name, bprm_buf + eppnt->p_offset, + eppnt->p_filesz); + } else { + retval = pread(image_fd, interp_name, eppnt->p_filesz, + eppnt->p_offset); + if (retval != eppnt->p_filesz) { + goto exit_perror; + } + } + if (interp_name[eppnt->p_filesz - 1] != 0) { + errmsg = "Invalid PT_INTERP entry"; + goto exit_errmsg; + } + *pinterp_name = g_steal_pointer(&interp_name); } } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, if (vaddr_em > info->brk) { info->brk = vaddr_em; } - } else if (eppnt->p_type == PT_INTERP && pinterp_name) { - g_autofree char *interp_name = NULL; - - if (*pinterp_name) { - errmsg = "Multiple PT_INTERP entries"; - goto exit_errmsg; - } - interp_name = g_malloc(eppnt->p_filesz); - if (!interp_name) { - goto exit_perror; - } - - if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { - memcpy(interp_name, bprm_buf + eppnt->p_offset, - eppnt->p_filesz); - } else { - retval = pread(image_fd, interp_name, eppnt->p_filesz, - eppnt->p_offset); - if (retval != eppnt->p_filesz) { - goto exit_perror; - } - } - if (interp_name[eppnt->p_filesz - 1] != 0) { - errmsg = "Invalid PT_INTERP entry"; - goto exit_errmsg; - } - *pinterp_name = g_steal_pointer(&interp_name); #ifdef TARGET_MIPS } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is a bit clearer than open-coding some of this with a bare c string. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-9-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ #include "qemu/guest-random.h" #include "qemu/units.h" #include "qemu/selfmap.h" +#include "qapi/error.h" #ifdef _ARCH_PPC64 #undef ARCH_DLINFO @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, struct elf_phdr *phdr; abi_ulong load_addr, load_bias, loaddr, hiaddr, error; int i, retval; - const char *errmsg; + Error *err = NULL; /* First of all, some simple consistency checks */ - errmsg = "Invalid ELF image for this architecture"; if (!elf_check_ident(ehdr)) { + error_setg(&err, "Invalid ELF image for this architecture"); goto exit_errmsg; } bswap_ehdr(ehdr); if (!elf_check_ehdr(ehdr)) { + error_setg(&err, "Invalid ELF image for this architecture"); goto exit_errmsg; } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, g_autofree char *interp_name = NULL; if (*pinterp_name) { - errmsg = "Multiple PT_INTERP entries"; + error_setg(&err, "Multiple PT_INTERP entries"); goto exit_errmsg; } + interp_name = g_malloc(eppnt->p_filesz); - if (!interp_name) { - goto exit_perror; - } if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { memcpy(interp_name, bprm_buf + eppnt->p_offset, @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, retval = pread(image_fd, interp_name, eppnt->p_filesz, eppnt->p_offset); if (retval != eppnt->p_filesz) { - goto exit_perror; + goto exit_read; } } if (interp_name[eppnt->p_filesz - 1] != 0) { - errmsg = "Invalid PT_INTERP entry"; + error_setg(&err, "Invalid PT_INTERP entry"); goto exit_errmsg; } *pinterp_name = g_steal_pointer(&interp_name); @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, (ehdr->e_type == ET_EXEC ? MAP_FIXED : 0), -1, 0); if (load_addr == -1) { - goto exit_perror; + goto exit_mmap; } load_bias = load_addr - loaddr; @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, image_fd, eppnt->p_offset - vaddr_po); if (error == -1) { - goto exit_perror; + goto exit_mmap; } } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; if (eppnt->p_filesz < sizeof(Mips_elf_abiflags_v0)) { - errmsg = "Invalid PT_MIPS_ABIFLAGS entry"; + error_setg(&err, "Invalid PT_MIPS_ABIFLAGS entry"); goto exit_errmsg; } if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, retval = pread(image_fd, &abiflags, sizeof(Mips_elf_abiflags_v0), eppnt->p_offset); if (retval != sizeof(Mips_elf_abiflags_v0)) { - goto exit_perror; + goto exit_read; } } bswap_mips_abiflags(&abiflags); @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, exit_read: if (retval >= 0) { - errmsg = "Incomplete read of file header"; - goto exit_errmsg; + error_setg(&err, "Incomplete read of file header"); + } else { + error_setg_errno(&err, errno, "Error reading file header"); } - exit_perror: - errmsg = strerror(errno); + goto exit_errmsg; + exit_mmap: + error_setg_errno(&err, errno, "Error mapping file"); + goto exit_errmsg; exit_errmsg: - fprintf(stderr, "%s: %s\n", image_name, errmsg); + error_reportf_err(err, "%s: ", image_name); exit(-1); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is slightly clearer than just using strerror, though the different forms produced by error_setg_file_open and error_setg_errno isn't entirely convenient. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-10-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_interp(const char *filename, struct image_info *info, char bprm_buf[BPRM_BUF_SIZE]) { int fd, retval; + Error *err = NULL; fd = open(path(filename), O_RDONLY); if (fd < 0) { - goto exit_perror; + error_setg_file_open(&err, errno, filename); + error_report_err(err); + exit(-1); } retval = read(fd, bprm_buf, BPRM_BUF_SIZE); if (retval < 0) { - goto exit_perror; + error_setg_errno(&err, errno, "Error reading file header"); + error_reportf_err(err, "%s: ", filename); + exit(-1); } + if (retval < BPRM_BUF_SIZE) { memset(bprm_buf + retval, 0, BPRM_BUF_SIZE - retval); } load_elf_image(filename, fd, info, NULL, bprm_buf); - return; - - exit_perror: - fprintf(stderr, "%s: %s\n", filename, strerror(errno)); - exit(-1); } static int symfind(const void *s0, const void *s1) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is generic support, with the code disabled for all targets. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-11-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 4 ++ linux-user/elfload.c | 157 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 161 insertions(+) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ struct image_info { abi_ulong interpreter_loadmap_addr; abi_ulong interpreter_pt_dynamic_addr; struct image_info *other_info; + + /* For target-specific processing of NT_GNU_PROPERTY_TYPE_0. */ + uint32_t note_flags; + #ifdef TARGET_MIPS int fp_abi; int interp_fp_abi; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void elf_core_copy_regs(target_elf_gregset_t *regs, #include "elf.h" +static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, + const uint32_t *data, + struct image_info *info, + Error **errp) +{ + g_assert_not_reached(); +} +#define ARCH_USE_GNU_PROPERTY 0 + struct exec { unsigned int a_info; /* Use macros N_MAGIC, etc for access */ @@ -XXX,XX +XXX,XX @@ void probe_guest_base(const char *image_name, abi_ulong guest_loaddr, "@ 0x%" PRIx64 "\n", (uint64_t)guest_base); } +enum { + /* The string "GNU\0" as a magic number. */ + GNU0_MAGIC = const_le32('G' | 'N' << 8 | 'U' << 16), + NOTE_DATA_SZ = 1 * KiB, + NOTE_NAME_SZ = 4, + ELF_GNU_PROPERTY_ALIGN = ELF_CLASS == ELFCLASS32 ? 4 : 8, +}; + +/* + * Process a single gnu_property entry. + * Return false for error. + */ +static bool parse_elf_property(const uint32_t *data, int *off, int datasz, + struct image_info *info, bool have_prev_type, + uint32_t *prev_type, Error **errp) +{ + uint32_t pr_type, pr_datasz, step; + + if (*off > datasz || !QEMU_IS_ALIGNED(*off, ELF_GNU_PROPERTY_ALIGN)) { + goto error_data; + } + datasz -= *off; + data += *off / sizeof(uint32_t); + + if (datasz < 2 * sizeof(uint32_t)) { + goto error_data; + } + pr_type = data[0]; + pr_datasz = data[1]; + data += 2; + datasz -= 2 * sizeof(uint32_t); + step = ROUND_UP(pr_datasz, ELF_GNU_PROPERTY_ALIGN); + if (step > datasz) { + goto error_data; + } + + /* Properties are supposed to be unique and sorted on pr_type. */ + if (have_prev_type && pr_type <= *prev_type) { + if (pr_type == *prev_type) { + error_setg(errp, "Duplicate property in PT_GNU_PROPERTY"); + } else { + error_setg(errp, "Unsorted property in PT_GNU_PROPERTY"); + } + return false; + } + *prev_type = pr_type; + + if (!arch_parse_elf_property(pr_type, pr_datasz, data, info, errp)) { + return false; + } + + *off += 2 * sizeof(uint32_t) + step; + return true; + + error_data: + error_setg(errp, "Ill-formed property in PT_GNU_PROPERTY"); + return false; +} + +/* Process NT_GNU_PROPERTY_TYPE_0. */ +static bool parse_elf_properties(int image_fd, + struct image_info *info, + const struct elf_phdr *phdr, + char bprm_buf[BPRM_BUF_SIZE], + Error **errp) +{ + union { + struct elf_note nhdr; + uint32_t data[NOTE_DATA_SZ / sizeof(uint32_t)]; + } note; + + int n, off, datasz; + bool have_prev_type; + uint32_t prev_type; + + /* Unless the arch requires properties, ignore them. */ + if (!ARCH_USE_GNU_PROPERTY) { + return true; + } + + /* If the properties are crazy large, that's too bad. */ + n = phdr->p_filesz; + if (n > sizeof(note)) { + error_setg(errp, "PT_GNU_PROPERTY too large"); + return false; + } + if (n < sizeof(note.nhdr)) { + error_setg(errp, "PT_GNU_PROPERTY too small"); + return false; + } + + if (phdr->p_offset + n <= BPRM_BUF_SIZE) { + memcpy(&note, bprm_buf + phdr->p_offset, n); + } else { + ssize_t len = pread(image_fd, &note, n, phdr->p_offset); + if (len != n) { + error_setg_errno(errp, errno, "Error reading file header"); + return false; + } + } + + /* + * The contents of a valid PT_GNU_PROPERTY is a sequence + * of uint32_t -- swap them all now. + */ +#ifdef BSWAP_NEEDED + for (int i = 0; i < n / 4; i++) { + bswap32s(note.data + i); + } +#endif + + /* + * Note that nhdr is 3 words, and that the "name" described by namesz + * immediately follows nhdr and is thus at the 4th word. Further, all + * of the inputs to the kernel's round_up are multiples of 4. + */ + if (note.nhdr.n_type != NT_GNU_PROPERTY_TYPE_0 || + note.nhdr.n_namesz != NOTE_NAME_SZ || + note.data[3] != GNU0_MAGIC) { + error_setg(errp, "Invalid note in PT_GNU_PROPERTY"); + return false; + } + off = sizeof(note.nhdr) + NOTE_NAME_SZ; + + datasz = note.nhdr.n_descsz + off; + if (datasz > n) { + error_setg(errp, "Invalid note size in PT_GNU_PROPERTY"); + return false; + } + + have_prev_type = false; + prev_type = 0; + while (1) { + if (off == datasz) { + return true; /* end, exit ok */ + } + if (!parse_elf_property(note.data, &off, datasz, info, + have_prev_type, &prev_type, errp)) { + return false; + } + have_prev_type = true; + } +} + /* Load an ELF image into the address space. IMAGE_NAME is the filename of the image, to use in error messages. @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, goto exit_errmsg; } *pinterp_name = g_steal_pointer(&interp_name); + } else if (eppnt->p_type == PT_GNU_PROPERTY) { + if (!parse_elf_properties(image_fd, info, eppnt, bprm_buf, &err)) { + goto exit_errmsg; + } } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use the new generic support for NT_GNU_PROPERTY_TYPE_0. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 48 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void elf_core_copy_regs(target_elf_gregset_t *regs, #include "elf.h" +/* We must delay the following stanzas until after "elf.h". */ +#if defined(TARGET_AARCH64) + +static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, + const uint32_t *data, + struct image_info *info, + Error **errp) +{ + if (pr_type == GNU_PROPERTY_AARCH64_FEATURE_1_AND) { + if (pr_datasz != sizeof(uint32_t)) { + error_setg(errp, "Ill-formed GNU_PROPERTY_AARCH64_FEATURE_1_AND"); + return false; + } + /* We will extract GNU_PROPERTY_AARCH64_FEATURE_1_BTI later. */ + info->note_flags = *data; + } + return true; +} +#define ARCH_USE_GNU_PROPERTY 1 + +#else + static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, const uint32_t *data, struct image_info *info, @@ -XXX,XX +XXX,XX @@ static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, } #define ARCH_USE_GNU_PROPERTY 0 +#endif + struct exec { unsigned int a_info; /* Use macros N_MAGIC, etc for access */ @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, struct elfhdr *ehdr = (struct elfhdr *)bprm_buf; struct elf_phdr *phdr; abi_ulong load_addr, load_bias, loaddr, hiaddr, error; - int i, retval; + int i, retval, prot_exec; Error *err = NULL; /* First of all, some simple consistency checks */ @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, info->brk = 0; info->elf_flags = ehdr->e_flags; + prot_exec = PROT_EXEC; +#ifdef TARGET_AARCH64 + /* + * If the BTI feature is present, this indicates that the executable + * pages of the startup binary should be mapped with PROT_BTI, so that + * branch targets are enforced. + * + * The startup binary is either the interpreter or the static executable. + * The interpreter is responsible for all pages of a dynamic executable. + * + * Elf notes are backward compatible to older cpus. + * Do not enable BTI unless it is supported. + */ + if ((info->note_flags & GNU_PROPERTY_AARCH64_FEATURE_1_BTI) + && (pinterp_name == NULL || *pinterp_name == 0) + && cpu_isar_feature(aa64_bti, ARM_CPU(thread_cpu))) { + prot_exec |= TARGET_PROT_BTI; + } +#endif + for (i = 0; i < ehdr->e_phnum; i++) { struct elf_phdr *eppnt = phdr + i; if (eppnt->p_type == PT_LOAD) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, elf_prot |= PROT_WRITE; } if (eppnt->p_flags & PF_X) { - elf_prot |= PROT_EXEC; + elf_prot |= prot_exec; } vaddr = load_bias + eppnt->p_vaddr; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The note test requires gcc 10 for -mbranch-protection=standard. The mmap test uses PROT_BTI and does not require special compiler support. Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/bti-1.c | 62 ++++++++++++++++ tests/tcg/aarch64/bti-2.c | 116 ++++++++++++++++++++++++++++++ tests/tcg/aarch64/bti-crt.inc.c | 51 +++++++++++++ tests/tcg/aarch64/Makefile.target | 10 +++ tests/tcg/configure.sh | 4 ++ 5 files changed, 243 insertions(+) create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-2.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c diff --git a/tests/tcg/aarch64/bti-1.c b/tests/tcg/aarch64/bti-1.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-1.c @@ -XXX,XX +XXX,XX @@ +/* + * Branch target identification, basic notskip cases. + */ + +#include "bti-crt.inc.c" + +static void skip2_sigill(int sig, siginfo_t *info, ucontext_t *uc) +{ + uc->uc_mcontext.pc += 8; + uc->uc_mcontext.pstate = 1; +} + +#define NOP "nop" +#define BTI_N "hint #32" +#define BTI_C "hint #34" +#define BTI_J "hint #36" +#define BTI_JC "hint #38" + +#define BTYPE_1(DEST) \ + asm("mov %0,#1; adr x16, 1f; br x16; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x16") + +#define BTYPE_2(DEST) \ + asm("mov %0,#1; adr x16, 1f; blr x16; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x16", "x30") + +#define BTYPE_3(DEST) \ + asm("mov %0,#1; adr x15, 1f; br x15; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x15") + +#define TEST(WHICH, DEST, EXPECT) \ + do { WHICH(DEST); fail += skipped ^ EXPECT; } while (0) + + +int main() +{ + int fail = 0; + int skipped; + + /* Signal-like with SA_SIGINFO. */ + signal_info(SIGILL, skip2_sigill); + + TEST(BTYPE_1, NOP, 1); + TEST(BTYPE_1, BTI_N, 1); + TEST(BTYPE_1, BTI_C, 0); + TEST(BTYPE_1, BTI_J, 0); + TEST(BTYPE_1, BTI_JC, 0); + + TEST(BTYPE_2, NOP, 1); + TEST(BTYPE_2, BTI_N, 1); + TEST(BTYPE_2, BTI_C, 0); + TEST(BTYPE_2, BTI_J, 1); + TEST(BTYPE_2, BTI_JC, 0); + + TEST(BTYPE_3, NOP, 1); + TEST(BTYPE_3, BTI_N, 1); + TEST(BTYPE_3, BTI_C, 1); + TEST(BTYPE_3, BTI_J, 0); + TEST(BTYPE_3, BTI_JC, 0); + + return fail; +} diff --git a/tests/tcg/aarch64/bti-2.c b/tests/tcg/aarch64/bti-2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-2.c @@ -XXX,XX +XXX,XX @@ +/* + * Branch target identification, basic notskip cases. + */ + +#include <stdio.h> +#include <signal.h> +#include <string.h> +#include <unistd.h> +#include <sys/mman.h> + +#ifndef PROT_BTI +#define PROT_BTI 0x10 +#endif + +static void skip2_sigill(int sig, siginfo_t *info, void *vuc) +{ + ucontext_t *uc = vuc; + uc->uc_mcontext.pc += 8; + uc->uc_mcontext.pstate = 1; +} + +#define NOP "nop" +#define BTI_N "hint #32" +#define BTI_C "hint #34" +#define BTI_J "hint #36" +#define BTI_JC "hint #38" + +#define BTYPE_1(DEST) \ + "mov x1, #1\n\t" \ + "adr x16, 1f\n\t" \ + "br x16\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define BTYPE_2(DEST) \ + "mov x1, #1\n\t" \ + "adr x16, 1f\n\t" \ + "blr x16\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define BTYPE_3(DEST) \ + "mov x1, #1\n\t" \ + "adr x15, 1f\n\t" \ + "br x15\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define TEST(WHICH, DEST, EXPECT) \ + WHICH(DEST) "\n" \ + ".if " #EXPECT "\n\t" \ + "eor x1, x1," #EXPECT "\n" \ + ".endif\n\t" \ + "add x0, x0, x1\n\t" + +asm("\n" +"test_begin:\n\t" + BTI_C "\n\t" + "mov x2, x30\n\t" + "mov x0, #0\n\t" + + TEST(BTYPE_1, NOP, 1) + TEST(BTYPE_1, BTI_N, 1) + TEST(BTYPE_1, BTI_C, 0) + TEST(BTYPE_1, BTI_J, 0) + TEST(BTYPE_1, BTI_JC, 0) + + TEST(BTYPE_2, NOP, 1) + TEST(BTYPE_2, BTI_N, 1) + TEST(BTYPE_2, BTI_C, 0) + TEST(BTYPE_2, BTI_J, 1) + TEST(BTYPE_2, BTI_JC, 0) + + TEST(BTYPE_3, NOP, 1) + TEST(BTYPE_3, BTI_N, 1) + TEST(BTYPE_3, BTI_C, 1) + TEST(BTYPE_3, BTI_J, 0) + TEST(BTYPE_3, BTI_JC, 0) + + "ret x2\n" +"test_end:" +); + +int main() +{ + struct sigaction sa; + void *tb, *te; + + void *p = mmap(0, getpagesize(), + PROT_EXEC | PROT_READ | PROT_WRITE | PROT_BTI, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (p == MAP_FAILED) { + perror("mmap"); + return 1; + } + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = skip2_sigill; + sa.sa_flags = SA_SIGINFO; + if (sigaction(SIGILL, &sa, NULL) < 0) { + perror("sigaction"); + return 1; + } + + /* + * ??? With "extern char test_begin[]", some compiler versions + * will use :got references, and some linker versions will + * resolve this reference to a static symbol incorrectly. + * Bypass this error by using a pc-relative reference directly. + */ + asm("adr %0, test_begin; adr %1, test_end" : "=r"(tb), "=r"(te)); + + memcpy(p, tb, te - tb); + + return ((int (*)(void))p)(); +} diff --git a/tests/tcg/aarch64/bti-crt.inc.c b/tests/tcg/aarch64/bti-crt.inc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-crt.inc.c @@ -XXX,XX +XXX,XX @@ +/* + * Minimal user-environment for testing BTI. + * + * Normal libc is not (yet) built with BTI support enabled, + * and so could generate a BTI TRAP before ever reaching main. + */ + +#include <stdlib.h> +#include <signal.h> +#include <ucontext.h> +#include <asm/unistd.h> + +int main(void); + +void _start(void) +{ + exit(main()); +} + +void exit(int ret) +{ + register int x0 __asm__("x0") = ret; + register int x8 __asm__("x8") = __NR_exit; + + asm volatile("svc #0" : : "r"(x0), "r"(x8)); + __builtin_unreachable(); +} + +/* + * Irritatingly, the user API struct sigaction does not match the + * kernel API struct sigaction. So for simplicity, isolate the + * kernel ABI here, and make this act like signal. + */ +void signal_info(int sig, void (*fn)(int, siginfo_t *, ucontext_t *)) +{ + struct kernel_sigaction { + void (*handler)(int, siginfo_t *, ucontext_t *); + unsigned long flags; + unsigned long restorer; + unsigned long mask; + } sa = { fn, SA_SIGINFO, 0, 0 }; + + register int x0 __asm__("x0") = sig; + register void *x1 __asm__("x1") = &sa; + register void *x2 __asm__("x2") = 0; + register int x3 __asm__("x3") = sizeof(unsigned long); + register int x8 __asm__("x8") = __NR_rt_sigaction; + + asm volatile("svc #0" + : : "r"(x0), "r"(x1), "r"(x2), "r"(x3), "r"(x8) : "memory"); +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ run-pauth-%: QEMU_OPTS += -cpu max run-plugin-pauth-%: QEMU_OPTS += -cpu max endif +# BTI Tests +# bti-1 tests the elf notes, so we require special compiler support. +ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_BTI),) +AARCH64_TESTS += bti-1 +bti-1: CFLAGS += -mbranch-protection=standard +bti-1: LDFLAGS += -nostdlib +endif +# bti-2 tests PROT_BTI, so no special compiler support required. +AARCH64_TESTS += bti-2 + # Semihosting smoke test for linux-user AARCH64_TESTS += semihosting run-semihosting: semihosting diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh index XXXXXXX..XXXXXXX 100755 --- a/tests/tcg/configure.sh +++ b/tests/tcg/configure.sh @@ -XXX,XX +XXX,XX @@ for target in $target_list; do -march=armv8.3-a -o $TMPE $TMPC; then echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak fi + if do_compiler "$target_compiler" $target_compiler_cflags \ + -mbranch-protection=standard -o $TMPE $TMPC; then + echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak + fi ;; esac -- 2.20.1 From: Thomas Huth <thuth@redhat.com> When compiling with -Werror=implicit-fallthrough, gcc complains about missing fallthrough annotations in this file. Looking at the code, the fallthrough is very likely intended here, so add some comments to silence the compiler warnings. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 20201020105938.23209-1-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/highbank.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ static void hb_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x30, 0, MEMTXATTRS_UNSPECIFIED, NULL); + /* fallthrough */ case 3: address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x20, 0, MEMTXATTRS_UNSPECIFIED, NULL); + /* fallthrough */ case 2: address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x10, 0, -- 2.20.1 From: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> This patch sets min_cpus field for xlnx-versal-virt platform, because it always creates XLNX_VERSAL_NR_ACPUS cpus even with -smp 1 command line option. Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 160343854912.8460.17915238517799132371.stgit@pasha-ThinkPad-X280 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-versal-virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void versal_virt_machine_class_init(ObjectClass *oc, void *data) mc->desc = "Xilinx Versal Virtual development board"; mc->init = versal_virt_init; + mc->min_cpus = XLNX_VERSAL_NR_ACPUS; mc->max_cpus = XLNX_VERSAL_NR_ACPUS; mc->default_cpus = XLNX_VERSAL_NR_ACPUS; mc->no_cdrom = true; -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> This allows us to reuse npcm7xx_timer_pause for the watchdog timer. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/npcm7xx_timer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_pause(NPCM7xxTimer *t) timer_del(&t->qtimer); now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); t->remaining_ns = t->expires_ns - now; - if (t->remaining_ns <= 0) { - npcm7xx_timer_reached_zero(t); - } } /* @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) } else { t->tcsr &= ~NPCM7XX_TCSR_CACT; npcm7xx_timer_pause(t); + if (t->remaining_ns <= 0) { + npcm7xx_timer_reached_zero(t); + } } } } -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm7xx_clk.h | 2 + include/hw/timer/npcm7xx_timer.h | 48 +++- hw/arm/npcm7xx.c | 12 + hw/misc/npcm7xx_clk.c | 28 ++ hw/timer/npcm7xx_timer.c | 266 ++++++++++++++---- tests/qtest/npcm7xx_watchdog_timer-test.c | 319 ++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 2 +- 8 files changed, 624 insertions(+), 54 deletions(-) create mode 100644 tests/qtest/npcm7xx_watchdog_timer-test.c diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_CLK_NR_REGS (0x70 / sizeof(uint32_t)) +#define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in" + typedef struct NPCM7xxCLKState { SysBusDevice parent; diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/npcm7xx_timer.h +++ b/include/hw/timer/npcm7xx_timer.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_TIMER_NR_REGS (0x54 / sizeof(uint32_t)) +/* The basic watchdog timer period is 2^14 clock cycles. */ +#define NPCM7XX_WATCHDOG_BASETIME_SHIFT 14 + +#define NPCM7XX_WATCHDOG_RESET_GPIO_OUT "npcm7xx-clk-watchdog-reset-gpio-out" + typedef struct NPCM7xxTimerCtrlState NPCM7xxTimerCtrlState; /** - * struct NPCM7xxTimer - Individual timer state. - * @irq: GIC interrupt line to fire on expiration (if enabled). + * struct NPCM7xxBaseTimer - Basic functionality that both regular timer and + * watchdog timer use. * @qtimer: QEMU timer that notifies us on expiration. * @expires_ns: Absolute virtual expiration time. * @remaining_ns: Remaining time until expiration if timer is paused. + */ +typedef struct NPCM7xxBaseTimer { + QEMUTimer qtimer; + int64_t expires_ns; + int64_t remaining_ns; +} NPCM7xxBaseTimer; + +/** + * struct NPCM7xxTimer - Individual timer state. + * @ctrl: The timer module that owns this timer. + * @irq: GIC interrupt line to fire on expiration (if enabled). + * @base_timer: The basic timer functionality for this timer. * @tcsr: The Timer Control and Status Register. * @ticr: The Timer Initial Count Register. */ @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxTimer { NPCM7xxTimerCtrlState *ctrl; qemu_irq irq; - QEMUTimer qtimer; - int64_t expires_ns; - int64_t remaining_ns; + NPCM7xxBaseTimer base_timer; uint32_t tcsr; uint32_t ticr; } NPCM7xxTimer; +/** + * struct NPCM7xxWatchdogTimer - The watchdog timer state. + * @ctrl: The timer module that owns this timer. + * @irq: GIC interrupt line to fire on expiration (if enabled). + * @reset_signal: The GPIO used to send a reset signal. + * @base_timer: The basic timer functionality for this timer. + * @wtcr: The Watchdog Timer Control Register. + */ +typedef struct NPCM7xxWatchdogTimer { + NPCM7xxTimerCtrlState *ctrl; + + qemu_irq irq; + qemu_irq reset_signal; + NPCM7xxBaseTimer base_timer; + + uint32_t wtcr; +} NPCM7xxWatchdogTimer; + /** * struct NPCM7xxTimerCtrlState - Timer Module device state. * @parent: System bus device. * @iomem: Memory region through which registers are accessed. + * @index: The index of this timer module. * @tisr: The Timer Interrupt Status Register. - * @wtcr: The Watchdog Timer Control Register. * @timer: The five individual timers managed by this module. + * @watchdog_timer: The watchdog timer managed by this module. */ struct NPCM7xxTimerCtrlState { SysBusDevice parent; @@ -XXX,XX +XXX,XX @@ struct NPCM7xxTimerCtrlState { MemoryRegion iomem; uint32_t tisr; - uint32_t wtcr; NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL]; + NPCM7xxWatchdogTimer watchdog_timer; }; #define TYPE_NPCM7XX_TIMER "npcm7xx-timer" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_TIMER12_IRQ, NPCM7XX_TIMER13_IRQ, NPCM7XX_TIMER14_IRQ, + NPCM7XX_WDG0_IRQ = 47, /* Timer Module 0 Watchdog */ + NPCM7XX_WDG1_IRQ, /* Timer Module 1 Watchdog */ + NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) qemu_irq irq = npcm7xx_irq(s, first_irq + j); sysbus_connect_irq(sbd, j, irq); } + + /* IRQ for watchdogs */ + sysbus_connect_irq(sbd, NPCM7XX_TIMERS_PER_CTRL, + npcm7xx_irq(s, NPCM7XX_WDG0_IRQ + i)); + /* GPIO that connects clk module with watchdog */ + qdev_connect_gpio_out_named(DEVICE(&s->tim[i]), + NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 0, + qdev_get_gpio_in_named(DEVICE(&s->clk), + NPCM7XX_WATCHDOG_RESET_GPIO_IN, i)); } /* UART0..3 (16550 compatible) */ diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/misc/npcm7xx_clk.h" +#include "hw/timer/npcm7xx_timer.h" #include "migration/vmstate.h" #include "qemu/error-report.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qemu/units.h" #include "trace.h" +#include "sysemu/watchdog.h" #define PLLCON_LOKI BIT(31) #define PLLCON_LOKS BIT(30) @@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = { [NPCM7XX_CLK_AHBCKFI] = 0x000000c8, }; +/* Register Field Definitions */ +#define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex A9 Cores */ + +/* The number of watchdogs that can trigger a reset. */ +#define NPCM7XX_NR_WATCHDOGS (3) + static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset, s->regs[reg] = value; } +/* Perform reset action triggered by a watchdog */ +static void npcm7xx_clk_perform_watchdog_reset(void *opaque, int n, + int level) +{ + NPCM7xxCLKState *clk = NPCM7XX_CLK(opaque); + uint32_t rcr; + + g_assert(n >= 0 && n <= NPCM7XX_NR_WATCHDOGS); + rcr = clk->regs[NPCM7XX_CLK_WD0RCR + n]; + if (rcr & NPCM7XX_CLK_WDRCR_CA9C) { + watchdog_perform_action(); + } else { + qemu_log_mask(LOG_UNIMP, + "%s: only CPU reset is implemented. (requested 0x%" PRIx32")\n", + __func__, rcr); + } +} + static const struct MemoryRegionOps npcm7xx_clk_ops = { .read = npcm7xx_clk_read, .write = npcm7xx_clk_write, @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj) memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s, TYPE_NPCM7XX_CLK, 4 * KiB); sysbus_init_mmio(&s->parent, &s->iomem); + qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset, + NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS); } static const VMStateDescription vmstate_npcm7xx_clk = { diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/irq.h" +#include "hw/qdev-properties.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/timer/npcm7xx_timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ enum NPCM7xxTimerRegisters { #define NPCM7XX_TCSR_PRESCALE_START 0 #define NPCM7XX_TCSR_PRESCALE_LEN 8 +#define NPCM7XX_WTCR_WTCLK(rv) extract32(rv, 10, 2) +#define NPCM7XX_WTCR_FREEZE_EN BIT(9) +#define NPCM7XX_WTCR_WTE BIT(7) +#define NPCM7XX_WTCR_WTIE BIT(6) +#define NPCM7XX_WTCR_WTIS(rv) extract32(rv, 4, 2) +#define NPCM7XX_WTCR_WTIF BIT(3) +#define NPCM7XX_WTCR_WTRF BIT(2) +#define NPCM7XX_WTCR_WTRE BIT(1) +#define NPCM7XX_WTCR_WTR BIT(0) + +/* + * The number of clock cycles between interrupt and reset in watchdog, used + * by the software to handle the interrupt before system is reset. + */ +#define NPCM7XX_WATCHDOG_INTERRUPT_TO_RESET_CYCLES 1024 + +/* Start or resume the timer. */ +static void npcm7xx_timer_start(NPCM7xxBaseTimer *t) +{ + int64_t now; + + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + t->expires_ns = now + t->remaining_ns; + timer_mod(&t->qtimer, t->expires_ns); +} + +/* Stop counting. Record the time remaining so we can continue later. */ +static void npcm7xx_timer_pause(NPCM7xxBaseTimer *t) +{ + int64_t now; + + timer_del(&t->qtimer); + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + t->remaining_ns = t->expires_ns - now; +} + +/* Delete the timer and reset it to default state. */ +static void npcm7xx_timer_clear(NPCM7xxBaseTimer *t) +{ + timer_del(&t->qtimer); + t->expires_ns = 0; + t->remaining_ns = 0; +} + /* * Returns the index of timer in the tc->timer array. This can be used to * locate the registers that belong to this timer. @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) return count; } +static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t) +{ + switch (NPCM7XX_WTCR_WTCLK(t->wtcr)) { + case 0: + return 1; + case 1: + return 256; + case 2: + return 2048; + case 3: + return 65536; + default: + g_assert_not_reached(); + } +} + +static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t, + int64_t cycles) +{ + uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t); + int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles; + + /* + * The reset function always clears the current timer. The caller of the + * this needs to decide whether to start the watchdog timer based on + * specific flag in WTCR. + */ + npcm7xx_timer_clear(&t->base_timer); + + ns *= prescaler; + t->base_timer.remaining_ns = ns; +} + +static void npcm7xx_watchdog_timer_reset(NPCM7xxWatchdogTimer *t) +{ + int64_t cycles = 1; + uint32_t s = NPCM7XX_WTCR_WTIS(t->wtcr); + + g_assert(s <= 3); + + cycles <<= NPCM7XX_WATCHDOG_BASETIME_SHIFT; + cycles <<= 2 * s; + + npcm7xx_watchdog_timer_reset_cycles(t, cycles); +} + /* * Raise the interrupt line if there's a pending interrupt and interrupts are * enabled for this timer. If not, lower it. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_check_interrupt(NPCM7xxTimer *t) trace_npcm7xx_timer_irq(DEVICE(tc)->canonical_path, index, pending); } -/* Start or resume the timer. */ -static void npcm7xx_timer_start(NPCM7xxTimer *t) -{ - int64_t now; - - now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - t->expires_ns = now + t->remaining_ns; - timer_mod(&t->qtimer, t->expires_ns); -} - /* * Called when the counter reaches zero. Sets the interrupt flag, and either * restarts or disables the timer. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t) tc->tisr |= BIT(index); if (t->tcsr & NPCM7XX_TCSR_PERIODIC) { - t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); if (t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } else { t->tcsr &= ~(NPCM7XX_TCSR_CEN | NPCM7XX_TCSR_CACT); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t) npcm7xx_timer_check_interrupt(t); } -/* Stop counting. Record the time remaining so we can continue later. */ -static void npcm7xx_timer_pause(NPCM7xxTimer *t) -{ - int64_t now; - - timer_del(&t->qtimer); - now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - t->remaining_ns = t->expires_ns - now; -} /* * Restart the timer from its initial value. If the timer was enabled and stays @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_pause(NPCM7xxTimer *t) */ static void npcm7xx_timer_restart(NPCM7xxTimer *t, uint32_t old_tcsr) { - t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_timer_read_tdr(NPCM7xxTimer *t) if (t->tcsr & NPCM7XX_TCSR_CEN) { int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - return npcm7xx_timer_ns_to_count(t, t->expires_ns - now); + return npcm7xx_timer_ns_to_count(t, t->base_timer.expires_ns - now); } - return npcm7xx_timer_ns_to_count(t, t->remaining_ns); + return npcm7xx_timer_ns_to_count(t, t->base_timer.remaining_ns); } static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) if (npcm7xx_tcsr_prescaler(old_tcsr) != npcm7xx_tcsr_prescaler(new_tcsr)) { /* Recalculate time remaining based on the current TDR value. */ - t->remaining_ns = npcm7xx_timer_count_to_ns(t, tdr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, tdr); if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_CEN) { if (new_tcsr & NPCM7XX_TCSR_CEN) { t->tcsr |= NPCM7XX_TCSR_CACT; - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } else { t->tcsr &= ~NPCM7XX_TCSR_CACT; - npcm7xx_timer_pause(t); - if (t->remaining_ns <= 0) { + npcm7xx_timer_pause(&t->base_timer); + if (t->base_timer.remaining_ns <= 0) { npcm7xx_timer_reached_zero(t); } } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tisr(NPCM7xxTimerCtrlState *s, uint32_t value) if (value & (1U << i)) { npcm7xx_timer_check_interrupt(&s->timer[i]); } + } } +static void npcm7xx_timer_write_wtcr(NPCM7xxWatchdogTimer *t, uint32_t new_wtcr) +{ + uint32_t old_wtcr = t->wtcr; + + /* + * WTIF and WTRF are cleared by writing 1. Writing 0 makes these bits + * unchanged. + */ + if (new_wtcr & NPCM7XX_WTCR_WTIF) { + new_wtcr &= ~NPCM7XX_WTCR_WTIF; + } else if (old_wtcr & NPCM7XX_WTCR_WTIF) { + new_wtcr |= NPCM7XX_WTCR_WTIF; + } + if (new_wtcr & NPCM7XX_WTCR_WTRF) { + new_wtcr &= ~NPCM7XX_WTCR_WTRF; + } else if (old_wtcr & NPCM7XX_WTCR_WTRF) { + new_wtcr |= NPCM7XX_WTCR_WTRF; + } + + t->wtcr = new_wtcr; + + if (new_wtcr & NPCM7XX_WTCR_WTR) { + t->wtcr &= ~NPCM7XX_WTCR_WTR; + npcm7xx_watchdog_timer_reset(t); + if (new_wtcr & NPCM7XX_WTCR_WTE) { + npcm7xx_timer_start(&t->base_timer); + } + } else if ((old_wtcr ^ new_wtcr) & NPCM7XX_WTCR_WTE) { + if (new_wtcr & NPCM7XX_WTCR_WTE) { + npcm7xx_timer_start(&t->base_timer); + } else { + npcm7xx_timer_pause(&t->base_timer); + } + } + +} + static hwaddr npcm7xx_tcsr_index(hwaddr reg) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_timer_read(void *opaque, hwaddr offset, unsigned size) break; case NPCM7XX_TIMER_WTCR: - value = s->wtcr; + value = s->watchdog_timer.wtcr; break; default: @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write(void *opaque, hwaddr offset, return; case NPCM7XX_TIMER_WTCR: - qemu_log_mask(LOG_UNIMP, "%s: WTCR write not implemented: 0x%08x\n", - __func__, value); + npcm7xx_timer_write_wtcr(&s->watchdog_timer, value); return; } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_enter_reset(Object *obj, ResetType type) for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { NPCM7xxTimer *t = &s->timer[i]; - timer_del(&t->qtimer); - t->expires_ns = 0; - t->remaining_ns = 0; + npcm7xx_timer_clear(&t->base_timer); t->tcsr = 0x00000005; t->ticr = 0x00000000; } s->tisr = 0x00000000; - s->wtcr = 0x00000400; + /* + * Set WTCLK to 1(default) and reset all flags except WTRF. + * WTRF is not reset during a core domain reset. + */ + s->watchdog_timer.wtcr = 0x00000400 | (s->watchdog_timer.wtcr & + NPCM7XX_WTCR_WTRF); +} + +static void npcm7xx_watchdog_timer_expired(void *opaque) +{ + NPCM7xxWatchdogTimer *t = opaque; + + if (t->wtcr & NPCM7XX_WTCR_WTE) { + if (t->wtcr & NPCM7XX_WTCR_WTIF) { + if (t->wtcr & NPCM7XX_WTCR_WTRE) { + t->wtcr |= NPCM7XX_WTCR_WTRF; + /* send reset signal to CLK module*/ + qemu_irq_raise(t->reset_signal); + } + } else { + t->wtcr |= NPCM7XX_WTCR_WTIF; + if (t->wtcr & NPCM7XX_WTCR_WTIE) { + /* send interrupt */ + qemu_irq_raise(t->irq); + } + npcm7xx_watchdog_timer_reset_cycles(t, + NPCM7XX_WATCHDOG_INTERRUPT_TO_RESET_CYCLES); + npcm7xx_timer_start(&t->base_timer); + } + } } static void npcm7xx_timer_hold_reset(Object *obj) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_hold_reset(Object *obj) for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { qemu_irq_lower(s->timer[i].irq); } + qemu_irq_lower(s->watchdog_timer.irq); } static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev); SysBusDevice *sbd = &s->parent; int i; + NPCM7xxWatchdogTimer *w; for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { NPCM7xxTimer *t = &s->timer[i]; t->ctrl = s; - timer_init_ns(&t->qtimer, QEMU_CLOCK_VIRTUAL, npcm7xx_timer_expired, t); + timer_init_ns(&t->base_timer.qtimer, QEMU_CLOCK_VIRTUAL, + npcm7xx_timer_expired, t); sysbus_init_irq(sbd, &t->irq); } + w = &s->watchdog_timer; + w->ctrl = s; + timer_init_ns(&w->base_timer.qtimer, QEMU_CLOCK_VIRTUAL, + npcm7xx_watchdog_timer_expired, w); + sysbus_init_irq(sbd, &w->irq); + memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s, TYPE_NPCM7XX_TIMER, 4 * KiB); sysbus_init_mmio(sbd, &s->iomem); + qdev_init_gpio_out_named(dev, &w->reset_signal, + NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1); } -static const VMStateDescription vmstate_npcm7xx_timer = { - .name = "npcm7xx-timer", +static const VMStateDescription vmstate_npcm7xx_base_timer = { + .name = "npcm7xx-base-timer", .version_id = 0, .minimum_version_id = 0, .fields = (VMStateField[]) { - VMSTATE_TIMER(qtimer, NPCM7xxTimer), - VMSTATE_INT64(expires_ns, NPCM7xxTimer), - VMSTATE_INT64(remaining_ns, NPCM7xxTimer), + VMSTATE_TIMER(qtimer, NPCM7xxBaseTimer), + VMSTATE_INT64(expires_ns, NPCM7xxBaseTimer), + VMSTATE_INT64(remaining_ns, NPCM7xxBaseTimer), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_timer = { + .name = "npcm7xx-timer", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_STRUCT(base_timer, NPCM7xxTimer, + 0, vmstate_npcm7xx_base_timer, + NPCM7xxBaseTimer), VMSTATE_UINT32(tcsr, NPCM7xxTimer), VMSTATE_UINT32(ticr, NPCM7xxTimer), VMSTATE_END_OF_LIST(), }, }; -static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { - .name = "npcm7xx-timer-ctrl", +static const VMStateDescription vmstate_npcm7xx_watchdog_timer = { + .name = "npcm7xx-watchdog-timer", .version_id = 0, .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_STRUCT(base_timer, NPCM7xxWatchdogTimer, + 0, vmstate_npcm7xx_base_timer, + NPCM7xxBaseTimer), + VMSTATE_UINT32(wtcr, NPCM7xxWatchdogTimer), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { + .name = "npcm7xx-timer-ctrl", + .version_id = 1, + .minimum_version_id = 1, .fields = (VMStateField[]) { VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState), - VMSTATE_UINT32(wtcr, NPCM7xxTimerCtrlState), VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState, NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer, NPCM7xxTimer), + VMSTATE_STRUCT(watchdog_timer, NPCM7xxTimerCtrlState, + 0, vmstate_npcm7xx_watchdog_timer, + NPCM7xxWatchdogTimer), VMSTATE_END_OF_LIST(), }, }; diff --git a/tests/qtest/npcm7xx_watchdog_timer-test.c b/tests/qtest/npcm7xx_watchdog_timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_watchdog_timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx Timer Watchdog Modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/timer.h" + +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" + +#define WTCR_OFFSET 0x1c +#define REF_HZ (25000000) + +/* WTCR bit fields */ +#define WTCLK(rv) ((rv) << 10) +#define WTE BIT(7) +#define WTIE BIT(6) +#define WTIS(rv) ((rv) << 4) +#define WTIF BIT(3) +#define WTRF BIT(2) +#define WTRE BIT(1) +#define WTR BIT(0) + +typedef struct Watchdog { + int irq; + uint64_t base_addr; +} Watchdog; + +static const Watchdog watchdog_list[] = { + { + .irq = 47, + .base_addr = 0xf0008000 + }, + { + .irq = 48, + .base_addr = 0xf0009000 + }, + { + .irq = 49, + .base_addr = 0xf000a000 + } +}; + +static int watchdog_index(const Watchdog *wd) +{ + ptrdiff_t diff = wd - watchdog_list; + + g_assert(diff >= 0 && diff < ARRAY_SIZE(watchdog_list)); + + return diff; +} + +static uint32_t watchdog_read_wtcr(QTestState *qts, const Watchdog *wd) +{ + return qtest_readl(qts, wd->base_addr + WTCR_OFFSET); +} + +static void watchdog_write_wtcr(QTestState *qts, const Watchdog *wd, + uint32_t value) +{ + qtest_writel(qts, wd->base_addr + WTCR_OFFSET, value); +} + +static uint32_t watchdog_prescaler(QTestState *qts, const Watchdog *wd) +{ + switch (extract32(watchdog_read_wtcr(qts, wd), 10, 2)) { + case 0: + return 1; + case 1: + return 256; + case 2: + return 2048; + case 3: + return 65536; + default: + g_assert_not_reached(); + } +} + +static QDict *get_watchdog_action(QTestState *qts) +{ + QDict *ev = qtest_qmp_eventwait_ref(qts, "WATCHDOG"); + QDict *data; + + data = qdict_get_qdict(ev, "data"); + qobject_ref(data); + qobject_unref(ev); + return data; +} + +#define RESET_CYCLES 1024 +static uint32_t watchdog_interrupt_cycles(QTestState *qts, const Watchdog *wd) +{ + uint32_t wtis = extract32(watchdog_read_wtcr(qts, wd), 4, 2); + return 1 << (14 + 2 * wtis); +} + +static int64_t watchdog_calculate_steps(uint32_t count, uint32_t prescale) +{ + return (NANOSECONDS_PER_SECOND / REF_HZ) * count * prescale; +} + +static int64_t watchdog_interrupt_steps(QTestState *qts, const Watchdog *wd) +{ + return watchdog_calculate_steps(watchdog_interrupt_cycles(qts, wd), + watchdog_prescaler(qts, wd)); +} + +/* Check wtcr can be reset to default value */ +static void test_init(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts = qtest_init("-machine quanta-gsj"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + watchdog_write_wtcr(qts, wd, WTCLK(1) | WTRF | WTIF | WTR); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(1)); + + qtest_quit(qts); +} + +/* Check a watchdog can generate interrupt and reset actions */ +static void test_reset_action(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts = qtest_init("-machine quanta-gsj"); + QDict *ad; + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + watchdog_write_wtcr(qts, wd, + WTCLK(0) | WTE | WTRF | WTRE | WTIF | WTIE | WTR); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTRE | WTIE); + + /* Check a watchdog can generate an interrupt */ + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTIF | WTIE | WTRE); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + /* Check a watchdog can generate a reset signal */ + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + ad = get_watchdog_action(qts); + /* The signal is a reset signal */ + g_assert_false(strcmp(qdict_get_str(ad, "action"), "reset")); + qobject_unref(ad); + qtest_qmp_eventwait(qts, "RESET"); + /* + * Make sure WTCR is reset to default except for WTRF bit which shouldn't + * be reset. + */ + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(1) | WTRF); + qtest_quit(qts); +} + +/* Check a watchdog works with all possible WTCLK prescalers and WTIS cycles */ +static void test_prescaler(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + + for (int wtclk = 0; wtclk < 4; ++wtclk) { + for (int wtis = 0; wtis < 4; ++wtis) { + QTestState *qts = qtest_init("-machine quanta-gsj"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, + WTCLK(wtclk) | WTE | WTIF | WTIS(wtis) | WTIE | WTR); + /* + * The interrupt doesn't fire until watchdog_interrupt_steps() + * cycles passed + */ + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd) - 1); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, 1); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + qtest_quit(qts); + } + } +} + +/* + * Check a watchdog doesn't fire if corresponding flags (WTIE and WTRE) are not + * set. + */ +static void test_enabling_flags(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts; + + /* Neither WTIE or WTRE is set, no interrupt or reset should happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTRF); + qtest_quit(qts); + + /* Only WTIE is set, interrupt is triggered but reset should not happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTIE | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_true(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTRF); + qtest_quit(qts); + + /* Only WTRE is set, interrupt is triggered but reset should not happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTRE | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_false(strcmp(qdict_get_str(get_watchdog_action(qts), "action"), + "reset")); + qtest_qmp_eventwait(qts, "RESET"); + qtest_quit(qts); + + /* + * The case when both flags are set is already tested in + * test_reset_action(). + */ +} + +/* Check a watchdog can pause and resume by setting WTE bits */ +static void test_pause(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts; + int64_t remaining_steps, steps; + + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTIE | WTRF | WTR); + remaining_steps = watchdog_interrupt_steps(qts, wd); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTE | WTIE); + + /* Run for half of the execution period. */ + steps = remaining_steps / 2; + remaining_steps -= steps; + qtest_clock_step(qts, steps); + + /* Pause the watchdog */ + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTIE); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTIE); + + /* Run for a long period of time, the watchdog shouldn't fire */ + qtest_clock_step(qts, steps << 4); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTIE); + g_assert_false(qtest_get_irq(qts, wd->irq)); + + /* Resume the watchdog */ + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIE); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTE | WTIE); + + /* Run for the reset of the execution period, the watchdog should fire */ + qtest_clock_step(qts, remaining_steps); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTIF | WTIE); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + qtest_quit(qts); +} + +static void watchdog_add_test(const char *name, const Watchdog* wd, + GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf( + "npcm7xx_watchdog_timer[%d]/%s", watchdog_index(wd), name); + qtest_add_data_func(full_name, wd, fn); +} +#define add_test(name, td) watchdog_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + for (int i = 0; i < ARRAY_SIZE(watchdog_list); ++i) { + const Watchdog *wd = &watchdog_list[i]; + + add_test(init, wd); + add_test(reset_action, wd); + add_test(prescaler, wd); + add_test(enabling_flags, wd); + add_test(pause, wd); + } + + return g_test_run(); +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* F: include/hw/*/npcm7xx* +F: tests/qtest/npcm7xx* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ (config_all_devices.has_key('CONFIG_ISA_TESTDEV') ? ['endianness-test'] : []) + \ ['prom-env-test', 'boot-serial-test'] -qtests_npcm7xx = ['npcm7xx_timer-test'] +qtests_npcm7xx = ['npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/misc/npcm7xx_rng.h | 34 ++++ hw/arm/npcm7xx.c | 7 +- hw/misc/npcm7xx_rng.c | 180 +++++++++++++++++++++ tests/qtest/npcm7xx_rng-test.c | 278 +++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + tests/qtest/meson.build | 5 +- 9 files changed, 510 insertions(+), 3 deletions(-) create mode 100644 include/hw/misc/npcm7xx_rng.h create mode 100644 hw/misc/npcm7xx_rng.c create mode 100644 tests/qtest/npcm7xx_rng-test.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * DDR4 memory controller (dummy interface indicating memory training is done) * OTP controllers (no protection features) * Flash Interface Unit (FIU; no protection features) + * Random Number Generator (RNG) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Peripheral SPI controller (PSPI) * Analog to Digital Converter (ADC) * SD/MMC host - * Random Number Generator (RNG) * PECI interface * Pulse Width Modulation (PWM) * Tachometer diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" +#include "hw/misc/npcm7xx_rng.h" #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState key_storage; NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; + NPCM7xxRNGState rng; NPCM7xxFIUState fiu[2]; } NPCM7xxState; diff --git a/include/hw/misc/npcm7xx_rng.h b/include/hw/misc/npcm7xx_rng.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/npcm7xx_rng.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx Random Number Generator. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM7XX_RNG_H +#define NPCM7XX_RNG_H + +#include "hw/sysbus.h" + +typedef struct NPCM7xxRNGState { + SysBusDevice parent; + + MemoryRegion iomem; + + uint8_t rngcs; + uint8_t rngd; + uint8_t rngmode; +} NPCM7xxRNGState; + +#define TYPE_NPCM7XX_RNG "npcm7xx-rng" +#define NPCM7XX_RNG(obj) OBJECT_CHECK(NPCM7xxRNGState, (obj), TYPE_NPCM7XX_RNG) + +#endif /* NPCM7XX_RNG_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_GCR_BA (0xf0800000) #define NPCM7XX_CLK_BA (0xf0801000) #define NPCM7XX_MC_BA (0xf0824000) +#define NPCM7XX_RNG_BA (0xf000b000) /* Internal AHB SRAM */ #define NPCM7XX_RAM3_BA (0xc0008000) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "otp2", &s->fuse_array, TYPE_NPCM7XX_FUSE_ARRAY); object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC); + object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG); for (i = 0; i < ARRAY_SIZE(s->tim); i++) { object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) serial_hd(i), DEVICE_LITTLE_ENDIAN); } + /* Random Number Generator. Cannot fail. */ + sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); create_unimplemented_device("npcm7xx.kcs", 0xf0007000, 4 * KiB); - create_unimplemented_device("npcm7xx.rng", 0xf000b000, 4 * KiB); create_unimplemented_device("npcm7xx.adc", 0xf000c000, 4 * KiB); create_unimplemented_device("npcm7xx.gfxi", 0xf000e000, 4 * KiB); create_unimplemented_device("npcm7xx.gpio[0]", 0xf0010000, 4 * KiB); diff --git a/hw/misc/npcm7xx_rng.c b/hw/misc/npcm7xx_rng.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/npcm7xx_rng.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx Random Number Generator. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/misc/npcm7xx_rng.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/guest-random.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +#define NPCM7XX_RNG_REGS_SIZE (4 * KiB) + +#define NPCM7XX_RNGCS (0x00) +#define NPCM7XX_RNGCS_CLKP(rv) extract32(rv, 2, 4) +#define NPCM7XX_RNGCS_DVALID BIT(1) +#define NPCM7XX_RNGCS_RNGE BIT(0) + +#define NPCM7XX_RNGD (0x04) +#define NPCM7XX_RNGMODE (0x08) +#define NPCM7XX_RNGMODE_NORMAL (0x02) + +static bool npcm7xx_rng_is_enabled(NPCM7xxRNGState *s) +{ + return (s->rngcs & NPCM7XX_RNGCS_RNGE) && + (s->rngmode == NPCM7XX_RNGMODE_NORMAL); +} + +static uint64_t npcm7xx_rng_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCM7xxRNGState *s = opaque; + uint64_t value = 0; + + switch (offset) { + case NPCM7XX_RNGCS: + /* + * If the RNG is enabled, but we don't have any valid random data, try + * obtaining some and update the DVALID bit accordingly. + */ + if (!npcm7xx_rng_is_enabled(s)) { + s->rngcs &= ~NPCM7XX_RNGCS_DVALID; + } else if (!(s->rngcs & NPCM7XX_RNGCS_DVALID)) { + uint8_t byte = 0; + + if (qemu_guest_getrandom(&byte, sizeof(byte), NULL) == 0) { + s->rngd = byte; + s->rngcs |= NPCM7XX_RNGCS_DVALID; + } + } + value = s->rngcs; + break; + case NPCM7XX_RNGD: + if (npcm7xx_rng_is_enabled(s) && s->rngcs & NPCM7XX_RNGCS_DVALID) { + s->rngcs &= ~NPCM7XX_RNGCS_DVALID; + value = s->rngd; + s->rngd = 0; + } + break; + case NPCM7XX_RNGMODE: + value = s->rngmode; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } + + trace_npcm7xx_rng_read(offset, value, size); + + return value; +} + +static void npcm7xx_rng_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + NPCM7xxRNGState *s = opaque; + + trace_npcm7xx_rng_write(offset, value, size); + + switch (offset) { + case NPCM7XX_RNGCS: + s->rngcs &= NPCM7XX_RNGCS_DVALID; + s->rngcs |= value & ~NPCM7XX_RNGCS_DVALID; + break; + case NPCM7XX_RNGD: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + case NPCM7XX_RNGMODE: + s->rngmode = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } +} + +static const MemoryRegionOps npcm7xx_rng_ops = { + .read = npcm7xx_rng_read, + .write = npcm7xx_rng_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void npcm7xx_rng_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxRNGState *s = NPCM7XX_RNG(obj); + + s->rngcs = 0; + s->rngd = 0; + s->rngmode = 0; +} + +static void npcm7xx_rng_init(Object *obj) +{ + NPCM7xxRNGState *s = NPCM7XX_RNG(obj); + + memory_region_init_io(&s->iomem, obj, &npcm7xx_rng_ops, s, "regs", + NPCM7XX_RNG_REGS_SIZE); + sysbus_init_mmio(&s->parent, &s->iomem); +} + +static const VMStateDescription vmstate_npcm7xx_rng = { + .name = "npcm7xx-rng", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(rngcs, NPCM7xxRNGState), + VMSTATE_UINT8(rngd, NPCM7xxRNGState), + VMSTATE_UINT8(rngmode, NPCM7xxRNGState), + VMSTATE_END_OF_LIST(), + }, +}; + +static void npcm7xx_rng_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx Random Number Generator"; + dc->vmsd = &vmstate_npcm7xx_rng; + rc->phases.enter = npcm7xx_rng_enter_reset; +} + +static const TypeInfo npcm7xx_rng_types[] = { + { + .name = TYPE_NPCM7XX_RNG, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxRNGState), + .class_init = npcm7xx_rng_class_init, + .instance_init = npcm7xx_rng_init, + }, +}; +DEFINE_TYPES(npcm7xx_rng_types); diff --git a/tests/qtest/npcm7xx_rng-test.c b/tests/qtest/npcm7xx_rng-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_rng-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Nuvoton NPCM7xx Random Number Generator + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include <math.h> + +#include "libqtest-single.h" +#include "qemu/bitops.h" + +#define RNG_BASE_ADDR 0xf000b000 + +/* Control and Status Register */ +#define RNGCS 0x00 +# define DVALID BIT(1) /* Data Valid */ +# define RNGE BIT(0) /* RNG Enable */ +/* Data Register */ +#define RNGD 0x04 +/* Mode Register */ +#define RNGMODE 0x08 +# define ROSEL_NORMAL (2) /* RNG only works in this mode */ + +/* Number of bits to collect for randomness tests. */ +#define TEST_INPUT_BITS (128) + +static void rng_writeb(unsigned int offset, uint8_t value) +{ + writeb(RNG_BASE_ADDR + offset, value); +} + +static uint8_t rng_readb(unsigned int offset) +{ + return readb(RNG_BASE_ADDR + offset); +} + +/* Disable RNG and set normal ring oscillator mode. */ +static void rng_reset(void) +{ + rng_writeb(RNGCS, 0); + rng_writeb(RNGMODE, ROSEL_NORMAL); +} + +/* Reset RNG and then enable it. */ +static void rng_reset_enable(void) +{ + rng_reset(); + rng_writeb(RNGCS, RNGE); +} + +/* Wait until Data Valid bit is set. */ +static bool rng_wait_ready(void) +{ + /* qemu_guest_getrandom may fail. Assume it won't fail 10 times in a row. */ + int retries = 10; + + while (retries-- > 0) { + if (rng_readb(RNGCS) & DVALID) { + return true; + } + } + + return false; +} + +/* + * Perform a frequency (monobit) test, as defined by NIST SP 800-22, on the + * sequence in buf and return the P-value. This represents the probability of a + * truly random sequence having the same proportion of zeros and ones as the + * sequence in buf. + * + * An RNG which always returns 0x00 or 0xff, or has some bits stuck at 0 or 1, + * will fail this test. However, an RNG which always returns 0x55, 0xf0 or some + * other value with an equal number of zeroes and ones will pass. + */ +static double calc_monobit_p(const uint8_t *buf, unsigned int len) +{ + unsigned int i; + double s_obs; + int sn = 0; + + for (i = 0; i < len; i++) { + /* + * Each 1 counts as 1, each 0 counts as -1. + * s = cp - (8 - cp) = 2 * cp - 8 + */ + sn += 2 * ctpop8(buf[i]) - 8; + } + + s_obs = abs(sn) / sqrt(len * BITS_PER_BYTE); + + return erfc(s_obs / sqrt(2)); +} + +/* + * Perform a runs test, as defined by NIST SP 800-22, and return the P-value. + * This represents the probability of a truly random sequence having the same + * number of runs (i.e. uninterrupted sequences of identical bits) as the + * sequence in buf. + */ +static double calc_runs_p(const unsigned long *buf, unsigned int nr_bits) +{ + unsigned int j; + unsigned int k; + int nr_ones = 0; + int vn_obs = 0; + double pi; + + g_assert(nr_bits % BITS_PER_LONG == 0); + + for (j = 0; j < nr_bits / BITS_PER_LONG; j++) { + nr_ones += __builtin_popcountl(buf[j]); + } + pi = (double)nr_ones / nr_bits; + + for (k = 0; k < nr_bits - 1; k++) { + vn_obs += !(test_bit(k, buf) ^ test_bit(k + 1, buf)); + } + vn_obs += 1; + + return erfc(fabs(vn_obs - 2 * nr_bits * pi * (1.0 - pi)) + / (2 * sqrt(2 * nr_bits) * pi * (1.0 - pi))); +} + +/* + * Verifies that DVALID is clear, and RNGD reads zero, when RNGE is cleared, + * and DVALID eventually becomes set when RNGE is set. + */ +static void test_enable_disable(void) +{ + /* Disable: DVALID should not be set, and RNGD should read zero */ + rng_reset(); + g_assert_cmphex(rng_readb(RNGCS), ==, 0); + g_assert_cmphex(rng_readb(RNGD), ==, 0); + + /* Enable: DVALID should be set, but we can't make assumptions about RNGD */ + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + g_assert_cmphex(rng_readb(RNGCS), ==, DVALID | RNGE); + + /* Disable: DVALID should not be set, and RNGD should read zero */ + rng_writeb(RNGCS, 0); + g_assert_cmphex(rng_readb(RNGCS), ==, 0); + g_assert_cmphex(rng_readb(RNGD), ==, 0); +} + +/* + * Verifies that the RNG only produces data when RNGMODE is set to 'normal' + * ring oscillator mode. + */ +static void test_rosel(void) +{ + rng_reset_enable(); + g_assert_true(rng_wait_ready()); + rng_writeb(RNGMODE, 0); + g_assert_false(rng_wait_ready()); + rng_writeb(RNGMODE, ROSEL_NORMAL); + g_assert_true(rng_wait_ready()); + rng_writeb(RNGMODE, 0); + g_assert_false(rng_wait_ready()); +} + +/* + * Verifies that a continuous sequence of bits collected after enabling the RNG + * satisfies a monobit test. + */ +static void test_continuous_monobit(void) +{ + uint8_t buf[TEST_INPUT_BITS / BITS_PER_BYTE]; + unsigned int i; + + rng_reset_enable(); + for (i = 0; i < sizeof(buf); i++) { + g_assert_true(rng_wait_ready()); + buf[i] = rng_readb(RNGD); + } + + g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); +} + +/* + * Verifies that a continuous sequence of bits collected after enabling the RNG + * satisfies a runs test. + */ +static void test_continuous_runs(void) +{ + union { + unsigned long l[TEST_INPUT_BITS / BITS_PER_LONG]; + uint8_t c[TEST_INPUT_BITS / BITS_PER_BYTE]; + } buf; + unsigned int i; + + rng_reset_enable(); + for (i = 0; i < sizeof(buf); i++) { + g_assert_true(rng_wait_ready()); + buf.c[i] = rng_readb(RNGD); + } + + g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); +} + +/* + * Verifies that the first data byte collected after enabling the RNG satisfies + * a monobit test. + */ +static void test_first_byte_monobit(void) +{ + /* Enable, collect one byte, disable. Repeat until we have 100 bits. */ + uint8_t buf[TEST_INPUT_BITS / BITS_PER_BYTE]; + unsigned int i; + + rng_reset(); + for (i = 0; i < sizeof(buf); i++) { + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + buf[i] = rng_readb(RNGD); + rng_writeb(RNGCS, 0); + } + + g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); +} + +/* + * Verifies that the first data byte collected after enabling the RNG satisfies + * a runs test. + */ +static void test_first_byte_runs(void) +{ + /* Enable, collect one byte, disable. Repeat until we have 100 bits. */ + union { + unsigned long l[TEST_INPUT_BITS / BITS_PER_LONG]; + uint8_t c[TEST_INPUT_BITS / BITS_PER_BYTE]; + } buf; + unsigned int i; + + rng_reset(); + for (i = 0; i < sizeof(buf); i++) { + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + buf.c[i] = rng_readb(RNGD); + rng_writeb(RNGCS, 0); + } + + g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("npcm7xx_rng/enable_disable", test_enable_disable); + qtest_add_func("npcm7xx_rng/rosel", test_rosel); + qtest_add_func("npcm7xx_rng/continuous/monobit", test_continuous_monobit); + qtest_add_func("npcm7xx_rng/continuous/runs", test_continuous_runs); + qtest_add_func("npcm7xx_rng/first_byte/monobit", test_first_byte_monobit); + qtest_add_func("npcm7xx_rng/first_byte/runs", test_first_byte_runs); + + qtest_start("-machine npcm750-evb"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c')) softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files( 'npcm7xx_clk.c', 'npcm7xx_gcr.c', + 'npcm7xx_rng.c', )) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files( 'omap_clk.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_clk_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " valu npcm7xx_gcr_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +# npcm7xx_rng.c +npcm7xx_rng_read(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" +npcm7xx_rng_write(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" + # stm32f4xx_syscfg.c stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d" stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d" diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ (config_all_devices.has_key('CONFIG_ISA_TESTDEV') ? ['endianness-test'] : []) + \ ['prom-env-test', 'boot-serial-test'] -qtests_npcm7xx = ['npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] +qtests_npcm7xx = \ + ['npcm7xx_rng-test', + 'npcm7xx_timer-test', + 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The NPCM730 and NPCM750 chips have a single USB host port shared between a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This adds support for both of them. Testing notes: * With -device usb-kbd, qemu will automatically insert a full-speed hub, and the keyboard becomes controlled by the OHCI controller. * With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly attached to the port without any hubs, and the device becomes controlled by the EHCI controller since it's high speed capable. * With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the keyboard is directly attached to the port, but it only advertises itself as full-speed capable, so it becomes controlled by the OHCI controller. In all cases, the keyboard device enumerates correctly. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- hw/usb/hcd-ehci.h | 1 + include/hw/arm/npcm7xx.h | 4 ++++ hw/arm/npcm7xx.c | 27 +++++++++++++++++++++++++-- hw/usb/hcd-ehci-sysbus.c | 19 +++++++++++++++++++ 5 files changed, 50 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * OTP controllers (no protection features) * Flash Interface Unit (FIU; no protection features) * Random Number Generator (RNG) + * USB host (USBH) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * eSPI slave interface * Ethernet controllers (GMAC and EMC) - * USB host (USBH) * USB device (USBD) * SMBus controller (SMBF) * Peripheral SPI controller (PSPI) diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.h +++ b/hw/usb/hcd-ehci.h @@ -XXX,XX +XXX,XX @@ struct EHCIPCIState { #define TYPE_PLATFORM_EHCI "platform-ehci-usb" #define TYPE_EXYNOS4210_EHCI "exynos4210-ehci-usb" #define TYPE_AW_H3_EHCI "aw-h3-ehci-usb" +#define TYPE_NPCM7XX_EHCI "npcm7xx-ehci-usb" #define TYPE_TEGRA2_EHCI "tegra2-ehci-usb" #define TYPE_PPC4xx_EHCI "ppc4xx-ehci-usb" #define TYPE_FUSBH200_EHCI "fusbh200-ehci-usb" diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/usb/hcd-ehci.h" +#include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" #define NPCM7XX_MAX_NUM_CPUS (2) @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; NPCM7xxRNGState rng; + EHCISysBusState ehci; + OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; } NPCM7xxState; diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_MC_BA (0xf0824000) #define NPCM7XX_RNG_BA (0xf000b000) +/* USB Host modules */ +#define NPCM7XX_EHCI_BA (0xf0806000) +#define NPCM7XX_OHCI_BA (0xf0807000) + /* Internal AHB SRAM */ #define NPCM7XX_RAM3_BA (0xc0008000) #define NPCM7XX_RAM3_SZ (4 * KiB) @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG0_IRQ = 47, /* Timer Module 0 Watchdog */ NPCM7XX_WDG1_IRQ, /* Timer Module 1 Watchdog */ NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ + NPCM7XX_EHCI_IRQ = 61, + NPCM7XX_OHCI_IRQ = 62, }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); } + object_initialize_child(obj, "ehci", &s->ehci, TYPE_NPCM7XX_EHCI); + object_initialize_child(obj, "ohci", &s->ohci, TYPE_SYSBUS_OHCI); + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_fiu) != ARRAY_SIZE(s->fiu)); for (i = 0; i < ARRAY_SIZE(s->fiu); i++) { object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i], @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* USB Host */ + object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true, + &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->ehci), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci), 0, NPCM7XX_EHCI_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci), 0, + npcm7xx_irq(s, NPCM7XX_EHCI_IRQ)); + + object_property_set_str(OBJECT(&s->ohci), "masterbus", "usb-bus.0", + &error_abort); + object_property_set_uint(OBJECT(&s->ohci), "num-ports", 1, &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->ohci), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ohci), 0, NPCM7XX_OHCI_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci), 0, + npcm7xx_irq(s, NPCM7XX_OHCI_IRQ)); + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); create_unimplemented_device("npcm7xx.gmac2", 0xf0804000, 8 * KiB); - create_unimplemented_device("npcm7xx.ehci", 0xf0806000, 4 * KiB); - create_unimplemented_device("npcm7xx.ohci", 0xf0807000, 4 * KiB); create_unimplemented_device("npcm7xx.vcd", 0xf0810000, 64 * KiB); create_unimplemented_device("npcm7xx.ece", 0xf0820000, 8 * KiB); create_unimplemented_device("npcm7xx.vdma", 0xf0822000, 8 * KiB); diff --git a/hw/usb/hcd-ehci-sysbus.c b/hw/usb/hcd-ehci-sysbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci-sysbus.c +++ b/hw/usb/hcd-ehci-sysbus.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ehci_aw_h3_type_info = { .class_init = ehci_aw_h3_class_init, }; +static void ehci_npcm7xx_class_init(ObjectClass *oc, void *data) +{ + SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); + DeviceClass *dc = DEVICE_CLASS(oc); + + sec->capsbase = 0x0; + sec->opregbase = 0x10; + sec->portscbase = 0x44; + sec->portnr = 1; + set_bit(DEVICE_CATEGORY_USB, dc->categories); +} + +static const TypeInfo ehci_npcm7xx_type_info = { + .name = TYPE_NPCM7XX_EHCI, + .parent = TYPE_SYS_BUS_EHCI, + .class_init = ehci_npcm7xx_class_init, +}; + static void ehci_tegra2_class_init(ObjectClass *oc, void *data) { SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void ehci_sysbus_register_types(void) type_register_static(&ehci_platform_type_info); type_register_static(&ehci_exynos4210_type_info); type_register_static(&ehci_aw_h3_type_info); + type_register_static(&ehci_npcm7xx_type_info); type_register_static(&ehci_tegra2_type_info); type_register_static(&ehci_ppc4xx_type_info); type_register_static(&ehci_fusbh200_type_info); -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/gpio/npcm7xx_gpio.h | 55 +++++ hw/arm/npcm7xx.c | 80 ++++++ hw/gpio/npcm7xx_gpio.c | 424 ++++++++++++++++++++++++++++++++ tests/qtest/npcm7xx_gpio-test.c | 385 +++++++++++++++++++++++++++++ hw/gpio/meson.build | 1 + hw/gpio/trace-events | 7 + tests/qtest/meson.build | 3 +- 9 files changed, 957 insertions(+), 2 deletions(-) create mode 100644 include/hw/gpio/npcm7xx_gpio.h create mode 100644 hw/gpio/npcm7xx_gpio.c create mode 100644 tests/qtest/npcm7xx_gpio-test.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Flash Interface Unit (FIU; no protection features) * Random Number Generator (RNG) * USB host (USBH) + * GPIO controller Missing devices --------------- - * GPIO controller * LPC/eSPI host-to-BMC interface, including * Keyboard and mouse controller interface (KBCI) diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/cpu/a9mpcore.h" +#include "hw/gpio/npcm7xx_gpio.h" #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; NPCM7xxRNGState rng; + NPCM7xxGPIOState gpio[8]; EHCISysBusState ehci; OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; diff --git a/include/hw/gpio/npcm7xx_gpio.h b/include/hw/gpio/npcm7xx_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/npcm7xx_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx General Purpose Input / Output (GPIO) + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef NPCM7XX_GPIO_H +#define NPCM7XX_GPIO_H + +#include "exec/memory.h" +#include "hw/sysbus.h" + +/* Number of pins managed by each controller. */ +#define NPCM7XX_GPIO_NR_PINS (32) + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM7XX_GPIO_NR_REGS (0x80 / sizeof(uint32_t)) + +typedef struct NPCM7xxGPIOState { + SysBusDevice parent; + + /* Properties to be defined by the SoC */ + uint32_t reset_pu; + uint32_t reset_pd; + uint32_t reset_osrc; + uint32_t reset_odsc; + + MemoryRegion mmio; + + qemu_irq irq; + qemu_irq output[NPCM7XX_GPIO_NR_PINS]; + + uint32_t pin_level; + uint32_t ext_level; + uint32_t ext_driven; + + uint32_t regs[NPCM7XX_GPIO_NR_REGS]; +} NPCM7xxGPIOState; + +#define TYPE_NPCM7XX_GPIO "npcm7xx-gpio" +#define NPCM7XX_GPIO(obj) \ + OBJECT_CHECK(NPCM7xxGPIOState, (obj), TYPE_NPCM7XX_GPIO) + +#endif /* NPCM7XX_GPIO_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ NPCM7XX_EHCI_IRQ = 61, NPCM7XX_OHCI_IRQ = 62, + NPCM7XX_GPIO0_IRQ = 116, + NPCM7XX_GPIO1_IRQ, + NPCM7XX_GPIO2_IRQ, + NPCM7XX_GPIO3_IRQ, + NPCM7XX_GPIO4_IRQ, + NPCM7XX_GPIO5_IRQ, + NPCM7XX_GPIO6_IRQ, + NPCM7XX_GPIO7_IRQ, }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_fiu3_flash_addr[] = { 0xb8000000, /* CS3 */ }; +static const struct { + hwaddr regs_addr; + uint32_t unconnected_pins; + uint32_t reset_pu; + uint32_t reset_pd; + uint32_t reset_osrc; + uint32_t reset_odsc; +} npcm7xx_gpio[] = { + { + .regs_addr = 0xf0010000, + .reset_pu = 0xff03ffff, + .reset_pd = 0x00fc0000, + }, { + .regs_addr = 0xf0011000, + .unconnected_pins = 0x0000001e, + .reset_pu = 0xfefffe07, + .reset_pd = 0x010001e0, + }, { + .regs_addr = 0xf0012000, + .reset_pu = 0x780fffff, + .reset_pd = 0x07f00000, + .reset_odsc = 0x00700000, + }, { + .regs_addr = 0xf0013000, + .reset_pu = 0x00fc0000, + .reset_pd = 0xff000000, + }, { + .regs_addr = 0xf0014000, + .reset_pu = 0xffffffff, + }, { + .regs_addr = 0xf0015000, + .reset_pu = 0xbf83f801, + .reset_pd = 0x007c0000, + .reset_osrc = 0x000000f1, + .reset_odsc = 0x3f9f80f1, + }, { + .regs_addr = 0xf0016000, + .reset_pu = 0xfc00f801, + .reset_pd = 0x000007fe, + .reset_odsc = 0x00000800, + }, { + .regs_addr = 0xf0017000, + .unconnected_pins = 0xffffff00, + .reset_pu = 0x0000007f, + .reset_osrc = 0x0000007f, + .reset_odsc = 0x0000007f, + }, +}; + static const struct { const char *name; hwaddr regs_addr; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); } + for (i = 0; i < ARRAY_SIZE(s->gpio); i++) { + object_initialize_child(obj, "gpio[*]", &s->gpio[i], TYPE_NPCM7XX_GPIO); + } + object_initialize_child(obj, "ehci", &s->ehci, TYPE_NPCM7XX_EHCI); object_initialize_child(obj, "ohci", &s->ohci, TYPE_SYSBUS_OHCI); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* GPIO modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_gpio) != ARRAY_SIZE(s->gpio)); + for (i = 0; i < ARRAY_SIZE(s->gpio); i++) { + Object *obj = OBJECT(&s->gpio[i]); + + object_property_set_uint(obj, "reset-pullup", + npcm7xx_gpio[i].reset_pu, &error_abort); + object_property_set_uint(obj, "reset-pulldown", + npcm7xx_gpio[i].reset_pd, &error_abort); + object_property_set_uint(obj, "reset-osrc", + npcm7xx_gpio[i].reset_osrc, &error_abort); + object_property_set_uint(obj, "reset-odsc", + npcm7xx_gpio[i].reset_odsc, &error_abort); + sysbus_realize(SYS_BUS_DEVICE(obj), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(obj), 0, npcm7xx_gpio[i].regs_addr); + sysbus_connect_irq(SYS_BUS_DEVICE(obj), 0, + npcm7xx_irq(s, NPCM7XX_GPIO0_IRQ + i)); + } + /* USB Host */ object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true, &error_abort); diff --git a/hw/gpio/npcm7xx_gpio.c b/hw/gpio/npcm7xx_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/npcm7xx_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx General Purpose Input / Output (GPIO) + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/gpio/npcm7xx_gpio.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "trace.h" + +/* 32-bit register indices. */ +enum NPCM7xxGPIORegister { + NPCM7XX_GPIO_TLOCK1, + NPCM7XX_GPIO_DIN, + NPCM7XX_GPIO_POL, + NPCM7XX_GPIO_DOUT, + NPCM7XX_GPIO_OE, + NPCM7XX_GPIO_OTYP, + NPCM7XX_GPIO_MP, + NPCM7XX_GPIO_PU, + NPCM7XX_GPIO_PD, + NPCM7XX_GPIO_DBNC, + NPCM7XX_GPIO_EVTYP, + NPCM7XX_GPIO_EVBE, + NPCM7XX_GPIO_OBL0, + NPCM7XX_GPIO_OBL1, + NPCM7XX_GPIO_OBL2, + NPCM7XX_GPIO_OBL3, + NPCM7XX_GPIO_EVEN, + NPCM7XX_GPIO_EVENS, + NPCM7XX_GPIO_EVENC, + NPCM7XX_GPIO_EVST, + NPCM7XX_GPIO_SPLCK, + NPCM7XX_GPIO_MPLCK, + NPCM7XX_GPIO_IEM, + NPCM7XX_GPIO_OSRC, + NPCM7XX_GPIO_ODSC, + NPCM7XX_GPIO_DOS = 0x68 / sizeof(uint32_t), + NPCM7XX_GPIO_DOC, + NPCM7XX_GPIO_OES, + NPCM7XX_GPIO_OEC, + NPCM7XX_GPIO_TLOCK2 = 0x7c / sizeof(uint32_t), + NPCM7XX_GPIO_REGS_END, +}; + +#define NPCM7XX_GPIO_REGS_SIZE (4 * KiB) + +#define NPCM7XX_GPIO_LOCK_MAGIC1 (0xc0defa73) +#define NPCM7XX_GPIO_LOCK_MAGIC2 (0xc0de1248) + +static void npcm7xx_gpio_update_events(NPCM7xxGPIOState *s, uint32_t din_diff) +{ + uint32_t din_new = s->regs[NPCM7XX_GPIO_DIN]; + + /* Trigger on high level */ + s->regs[NPCM7XX_GPIO_EVST] |= din_new & ~s->regs[NPCM7XX_GPIO_EVTYP]; + /* Trigger on both edges */ + s->regs[NPCM7XX_GPIO_EVST] |= (din_diff & s->regs[NPCM7XX_GPIO_EVTYP] + & s->regs[NPCM7XX_GPIO_EVBE]); + /* Trigger on rising edge */ + s->regs[NPCM7XX_GPIO_EVST] |= (din_diff & din_new + & s->regs[NPCM7XX_GPIO_EVTYP]); + + trace_npcm7xx_gpio_update_events(DEVICE(s)->canonical_path, + s->regs[NPCM7XX_GPIO_EVST], + s->regs[NPCM7XX_GPIO_EVEN]); + qemu_set_irq(s->irq, !!(s->regs[NPCM7XX_GPIO_EVST] + & s->regs[NPCM7XX_GPIO_EVEN])); +} + +static void npcm7xx_gpio_update_pins(NPCM7xxGPIOState *s, uint32_t diff) +{ + uint32_t drive_en; + uint32_t drive_lvl; + uint32_t not_driven; + uint32_t undefined; + uint32_t pin_diff; + uint32_t din_old; + + /* Calculate level of each pin driven by GPIO controller. */ + drive_lvl = s->regs[NPCM7XX_GPIO_DOUT] ^ s->regs[NPCM7XX_GPIO_POL]; + /* If OTYP=1, only drive low (open drain) */ + drive_en = s->regs[NPCM7XX_GPIO_OE] & ~(s->regs[NPCM7XX_GPIO_OTYP] + & drive_lvl); + /* + * If a pin is driven to opposite levels by the GPIO controller and the + * external driver, the result is undefined. + */ + undefined = drive_en & s->ext_driven & (drive_lvl ^ s->ext_level); + if (undefined) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: pins have multiple drivers: 0x%" PRIx32 "\n", + DEVICE(s)->canonical_path, undefined); + } + + not_driven = ~(drive_en | s->ext_driven); + pin_diff = s->pin_level; + + /* Set pins to externally driven level. */ + s->pin_level = s->ext_level & s->ext_driven; + /* Set internally driven pins, ignoring any conflicts. */ + s->pin_level |= drive_lvl & drive_en; + /* Pull up undriven pins with internal pull-up enabled. */ + s->pin_level |= not_driven & s->regs[NPCM7XX_GPIO_PU]; + /* Pins not driven, pulled up or pulled down are undefined */ + undefined |= not_driven & ~(s->regs[NPCM7XX_GPIO_PU] + | s->regs[NPCM7XX_GPIO_PD]); + + /* If any pins changed state, update the outgoing GPIOs. */ + pin_diff ^= s->pin_level; + pin_diff |= undefined & diff; + if (pin_diff) { + int i; + + for (i = 0; i < NPCM7XX_GPIO_NR_PINS; i++) { + uint32_t mask = BIT(i); + if (pin_diff & mask) { + int level = (undefined & mask) ? -1 : !!(s->pin_level & mask); + trace_npcm7xx_gpio_set_output(DEVICE(s)->canonical_path, + i, level); + qemu_set_irq(s->output[i], level); + } + } + } + + /* Calculate new value of DIN after masking and polarity setting. */ + din_old = s->regs[NPCM7XX_GPIO_DIN]; + s->regs[NPCM7XX_GPIO_DIN] = ((s->pin_level & s->regs[NPCM7XX_GPIO_IEM]) + ^ s->regs[NPCM7XX_GPIO_POL]); + + /* See if any new events triggered because of all this. */ + npcm7xx_gpio_update_events(s, din_old ^ s->regs[NPCM7XX_GPIO_DIN]); +} + +static bool npcm7xx_gpio_is_locked(NPCM7xxGPIOState *s) +{ + return s->regs[NPCM7XX_GPIO_TLOCK1] == 1; +} + +static uint64_t npcm7xx_gpio_regs_read(void *opaque, hwaddr addr, + unsigned int size) +{ + hwaddr reg = addr / sizeof(uint32_t); + NPCM7xxGPIOState *s = opaque; + uint64_t value = 0; + + switch (reg) { + case NPCM7XX_GPIO_TLOCK1 ... NPCM7XX_GPIO_EVEN: + case NPCM7XX_GPIO_EVST ... NPCM7XX_GPIO_ODSC: + value = s->regs[reg]; + break; + + case NPCM7XX_GPIO_EVENS ... NPCM7XX_GPIO_EVENC: + case NPCM7XX_GPIO_DOS ... NPCM7XX_GPIO_TLOCK2: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from write-only register 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } + + trace_npcm7xx_gpio_read(DEVICE(s)->canonical_path, addr, value); + + return value; +} + +static void npcm7xx_gpio_regs_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + hwaddr reg = addr / sizeof(uint32_t); + NPCM7xxGPIOState *s = opaque; + uint32_t value = v; + uint32_t diff; + + trace_npcm7xx_gpio_write(DEVICE(s)->canonical_path, addr, v); + + if (npcm7xx_gpio_is_locked(s)) { + switch (reg) { + case NPCM7XX_GPIO_TLOCK1: + if (s->regs[NPCM7XX_GPIO_TLOCK2] == NPCM7XX_GPIO_LOCK_MAGIC2 && + value == NPCM7XX_GPIO_LOCK_MAGIC1) { + s->regs[NPCM7XX_GPIO_TLOCK1] = 0; + s->regs[NPCM7XX_GPIO_TLOCK2] = 0; + } + break; + + case NPCM7XX_GPIO_TLOCK2: + s->regs[reg] = value; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to locked register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } + + return; + } + + diff = s->regs[reg] ^ value; + + switch (reg) { + case NPCM7XX_GPIO_TLOCK1: + case NPCM7XX_GPIO_TLOCK2: + s->regs[NPCM7XX_GPIO_TLOCK1] = 1; + s->regs[NPCM7XX_GPIO_TLOCK2] = 0; + break; + + case NPCM7XX_GPIO_DIN: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + + case NPCM7XX_GPIO_POL: + case NPCM7XX_GPIO_DOUT: + case NPCM7XX_GPIO_OE: + case NPCM7XX_GPIO_OTYP: + case NPCM7XX_GPIO_PU: + case NPCM7XX_GPIO_PD: + case NPCM7XX_GPIO_IEM: + s->regs[reg] = value; + npcm7xx_gpio_update_pins(s, diff); + break; + + case NPCM7XX_GPIO_DOS: + s->regs[NPCM7XX_GPIO_DOUT] |= value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_DOC: + s->regs[NPCM7XX_GPIO_DOUT] &= ~value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_OES: + s->regs[NPCM7XX_GPIO_OE] |= value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_OEC: + s->regs[NPCM7XX_GPIO_OE] &= ~value; + npcm7xx_gpio_update_pins(s, value); + break; + + case NPCM7XX_GPIO_EVTYP: + case NPCM7XX_GPIO_EVBE: + case NPCM7XX_GPIO_EVEN: + s->regs[reg] = value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_EVENS: + s->regs[NPCM7XX_GPIO_EVEN] |= value; + npcm7xx_gpio_update_events(s, 0); + break; + case NPCM7XX_GPIO_EVENC: + s->regs[NPCM7XX_GPIO_EVEN] &= ~value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_EVST: + s->regs[reg] &= ~value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_MP: + case NPCM7XX_GPIO_DBNC: + case NPCM7XX_GPIO_OSRC: + case NPCM7XX_GPIO_ODSC: + /* Nothing to do; just store the value. */ + s->regs[reg] = value; + break; + + case NPCM7XX_GPIO_OBL0: + case NPCM7XX_GPIO_OBL1: + case NPCM7XX_GPIO_OBL2: + case NPCM7XX_GPIO_OBL3: + s->regs[reg] = value; + qemu_log_mask(LOG_UNIMP, "%s: Blinking is not implemented\n", + __func__); + break; + + case NPCM7XX_GPIO_SPLCK: + case NPCM7XX_GPIO_MPLCK: + qemu_log_mask(LOG_UNIMP, "%s: Per-pin lock is not implemented\n", + __func__); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } +} + +static const MemoryRegionOps npcm7xx_gpio_regs_ops = { + .read = npcm7xx_gpio_regs_read, + .write = npcm7xx_gpio_regs_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void npcm7xx_gpio_set_input(void *opaque, int line, int level) +{ + NPCM7xxGPIOState *s = opaque; + + trace_npcm7xx_gpio_set_input(DEVICE(s)->canonical_path, line, level); + + g_assert(line >= 0 && line < NPCM7XX_GPIO_NR_PINS); + + s->ext_driven = deposit32(s->ext_driven, line, 1, level >= 0); + s->ext_level = deposit32(s->ext_level, line, 1, level > 0); + + npcm7xx_gpio_update_pins(s, BIT(line)); +} + +static void npcm7xx_gpio_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + + memset(s->regs, 0, sizeof(s->regs)); + + s->regs[NPCM7XX_GPIO_PU] = s->reset_pu; + s->regs[NPCM7XX_GPIO_PD] = s->reset_pd; + s->regs[NPCM7XX_GPIO_OSRC] = s->reset_osrc; + s->regs[NPCM7XX_GPIO_ODSC] = s->reset_odsc; +} + +static void npcm7xx_gpio_hold_reset(Object *obj) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + + npcm7xx_gpio_update_pins(s, -1); +} + +static void npcm7xx_gpio_init(Object *obj) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + DeviceState *dev = DEVICE(obj); + + memory_region_init_io(&s->mmio, obj, &npcm7xx_gpio_regs_ops, s, + "regs", NPCM7XX_GPIO_REGS_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + qdev_init_gpio_in(dev, npcm7xx_gpio_set_input, NPCM7XX_GPIO_NR_PINS); + qdev_init_gpio_out(dev, s->output, NPCM7XX_GPIO_NR_PINS); +} + +static const VMStateDescription vmstate_npcm7xx_gpio = { + .name = "npcm7xx-gpio", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT32(pin_level, NPCM7xxGPIOState), + VMSTATE_UINT32(ext_level, NPCM7xxGPIOState), + VMSTATE_UINT32(ext_driven, NPCM7xxGPIOState), + VMSTATE_UINT32_ARRAY(regs, NPCM7xxGPIOState, NPCM7XX_GPIO_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + +static Property npcm7xx_gpio_properties[] = { + /* Bit n set => pin n has pullup enabled by default. */ + DEFINE_PROP_UINT32("reset-pullup", NPCM7xxGPIOState, reset_pu, 0), + /* Bit n set => pin n has pulldown enabled by default. */ + DEFINE_PROP_UINT32("reset-pulldown", NPCM7xxGPIOState, reset_pd, 0), + /* Bit n set => pin n has high slew rate by default. */ + DEFINE_PROP_UINT32("reset-osrc", NPCM7xxGPIOState, reset_osrc, 0), + /* Bit n set => pin n has high drive strength by default. */ + DEFINE_PROP_UINT32("reset-odsc", NPCM7xxGPIOState, reset_odsc, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void npcm7xx_gpio_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *reset = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + QEMU_BUILD_BUG_ON(NPCM7XX_GPIO_REGS_END > NPCM7XX_GPIO_NR_REGS); + + dc->desc = "NPCM7xx GPIO Controller"; + dc->vmsd = &vmstate_npcm7xx_gpio; + reset->phases.enter = npcm7xx_gpio_enter_reset; + reset->phases.hold = npcm7xx_gpio_hold_reset; + device_class_set_props(dc, npcm7xx_gpio_properties); +} + +static const TypeInfo npcm7xx_gpio_types[] = { + { + .name = TYPE_NPCM7XX_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxGPIOState), + .class_init = npcm7xx_gpio_class_init, + .instance_init = npcm7xx_gpio_init, + }, +}; +DEFINE_TYPES(npcm7xx_gpio_types); diff --git a/tests/qtest/npcm7xx_gpio-test.c b/tests/qtest/npcm7xx_gpio-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_gpio-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Nuvoton NPCM7xx GPIO modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +#define NR_GPIO_DEVICES (8) +#define GPIO(x) (0xf0010000 + (x) * 0x1000) +#define GPIO_IRQ(x) (116 + (x)) + +/* GPIO registers */ +#define GP_N_TLOCK1 0x00 +#define GP_N_DIN 0x04 /* Data IN */ +#define GP_N_POL 0x08 /* Polarity */ +#define GP_N_DOUT 0x0c /* Data OUT */ +#define GP_N_OE 0x10 /* Output Enable */ +#define GP_N_OTYP 0x14 +#define GP_N_MP 0x18 +#define GP_N_PU 0x1c /* Pull-up */ +#define GP_N_PD 0x20 /* Pull-down */ +#define GP_N_DBNC 0x24 /* Debounce */ +#define GP_N_EVTYP 0x28 /* Event Type */ +#define GP_N_EVBE 0x2c /* Event Both Edge */ +#define GP_N_OBL0 0x30 +#define GP_N_OBL1 0x34 +#define GP_N_OBL2 0x38 +#define GP_N_OBL3 0x3c +#define GP_N_EVEN 0x40 /* Event Enable */ +#define GP_N_EVENS 0x44 /* Event Set (enable) */ +#define GP_N_EVENC 0x48 /* Event Clear (disable) */ +#define GP_N_EVST 0x4c /* Event Status */ +#define GP_N_SPLCK 0x50 +#define GP_N_MPLCK 0x54 +#define GP_N_IEM 0x58 /* Input Enable */ +#define GP_N_OSRC 0x5c +#define GP_N_ODSC 0x60 +#define GP_N_DOS 0x68 /* Data OUT Set */ +#define GP_N_DOC 0x6c /* Data OUT Clear */ +#define GP_N_OES 0x70 /* Output Enable Set */ +#define GP_N_OEC 0x74 /* Output Enable Clear */ +#define GP_N_TLOCK2 0x7c + +static void gpio_unlock(int n) +{ + if (readl(GPIO(n) + GP_N_TLOCK1) != 0) { + writel(GPIO(n) + GP_N_TLOCK2, 0xc0de1248); + writel(GPIO(n) + GP_N_TLOCK1, 0xc0defa73); + } +} + +/* Restore the GPIO controller to a sensible default state. */ +static void gpio_reset(int n) +{ + gpio_unlock(0); + + writel(GPIO(n) + GP_N_EVEN, 0x00000000); + writel(GPIO(n) + GP_N_EVST, 0xffffffff); + writel(GPIO(n) + GP_N_POL, 0x00000000); + writel(GPIO(n) + GP_N_DOUT, 0x00000000); + writel(GPIO(n) + GP_N_OE, 0x00000000); + writel(GPIO(n) + GP_N_OTYP, 0x00000000); + writel(GPIO(n) + GP_N_PU, 0xffffffff); + writel(GPIO(n) + GP_N_PD, 0x00000000); + writel(GPIO(n) + GP_N_IEM, 0xffffffff); +} + +static void test_dout_to_din(void) +{ + gpio_reset(0); + + /* When output is enabled, DOUT should be reflected on DIN. */ + writel(GPIO(0) + GP_N_OE, 0xffffffff); + /* PU and PD shouldn't have any impact on DIN. */ + writel(GPIO(0) + GP_N_PU, 0xffff0000); + writel(GPIO(0) + GP_N_PD, 0x0000ffff); + writel(GPIO(0) + GP_N_DOUT, 0x12345678); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x12345678); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x12345678); +} + +static void test_pullup_pulldown(void) +{ + gpio_reset(0); + + /* + * When output is disabled, and PD is the inverse of PU, PU should be + * reflected on DIN. If PD is not the inverse of PU, the state of DIN is + * undefined, so we don't test that. + */ + writel(GPIO(0) + GP_N_OE, 0x00000000); + /* DOUT shouldn't have any impact on DIN. */ + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_PU, 0x23456789); + writel(GPIO(0) + GP_N_PD, ~0x23456789U); + g_assert_cmphex(readl(GPIO(0) + GP_N_PU), ==, 0x23456789); + g_assert_cmphex(readl(GPIO(0) + GP_N_PD), ==, ~0x23456789U); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x23456789); +} + +static void test_output_enable(void) +{ + gpio_reset(0); + + /* + * With all pins weakly pulled down, and DOUT all-ones, OE should be + * reflected on DIN. + */ + writel(GPIO(0) + GP_N_DOUT, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0x00000000); + writel(GPIO(0) + GP_N_PD, 0xffffffff); + writel(GPIO(0) + GP_N_OE, 0x3456789a); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x3456789a); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x3456789a); + + writel(GPIO(0) + GP_N_OEC, 0x00030002); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x34547898); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x34547898); + + writel(GPIO(0) + GP_N_OES, 0x0000f001); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x3454f899); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x3454f899); +} + +static void test_open_drain(void) +{ + gpio_reset(0); + + /* + * Upper half of DOUT drives a 1 only if the corresponding bit in OTYP is + * not set. If OTYP is set, DIN is determined by PU/PD. Lower half of + * DOUT always drives a 0 regardless of OTYP; PU/PD have no effect. When + * OE is 0, output is determined by PU/PD; OTYP has no effect. + */ + writel(GPIO(0) + GP_N_OTYP, 0x456789ab); + writel(GPIO(0) + GP_N_OE, 0xf0f0f0f0); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_PU, 0xff00ff00); + writel(GPIO(0) + GP_N_PD, 0x00ff00ff); + g_assert_cmphex(readl(GPIO(0) + GP_N_OTYP), ==, 0x456789ab); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff900f00); +} + +static void test_polarity(void) +{ + gpio_reset(0); + + /* + * In push-pull mode, DIN should reflect DOUT because the signal is + * inverted in both directions. + */ + writel(GPIO(0) + GP_N_OTYP, 0x00000000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0x56789abc); + writel(GPIO(0) + GP_N_POL, 0x6789abcd); + g_assert_cmphex(readl(GPIO(0) + GP_N_POL), ==, 0x6789abcd); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x56789abc); + + /* + * When turning off the drivers, DIN should reflect the inverse of the + * pulled-up lines. + */ + writel(GPIO(0) + GP_N_OE, 0x00000000); + writel(GPIO(0) + GP_N_POL, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0x789abcde); + writel(GPIO(0) + GP_N_PD, ~0x789abcdeU); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, ~0x789abcdeU); + + /* + * In open-drain mode, DOUT=1 will appear to drive the pin high (since DIN + * is inverted), while DOUT=0 will leave the pin floating. + */ + writel(GPIO(0) + GP_N_OTYP, 0xffffffff); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0xffff0000); + writel(GPIO(0) + GP_N_PD, 0x0000ffff); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff00ffff); +} + +static void test_input_mask(void) +{ + gpio_reset(0); + + /* IEM=0 forces the input to zero before polarity inversion. */ + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + writel(GPIO(0) + GP_N_POL, 0xffff0000); + writel(GPIO(0) + GP_N_IEM, 0x87654321); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff9a4300); +} + +static void test_temp_lock(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + + /* Make sure we're unlocked initially. */ + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + /* Writing any value to TLOCK1 will lock. */ + writel(GPIO(0) + GP_N_TLOCK1, 0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 1); + writel(GPIO(0) + GP_N_DOUT, 0xa9876543); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x98765432); + /* Now, try to unlock. */ + gpio_unlock(0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + writel(GPIO(0) + GP_N_DOUT, 0xa9876543); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0xa9876543); + + /* Try it again, but write TLOCK2 to lock. */ + writel(GPIO(0) + GP_N_TLOCK2, 0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 1); + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0xa9876543); + /* Now, try to unlock. */ + gpio_unlock(0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x98765432); +} + +static void test_events_level(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0x00000000); + writel(GPIO(0) + GP_N_DOUT, 0xba987654); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba987654); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0x00000000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba987654); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x00007654); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba980000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0xba980000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_events_rising_edge(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0xffffffff); + writel(GPIO(0) + GP_N_EVBE, 0x00000000); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x0000ff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0x00ff0000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ffff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x0000f000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ff0f00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x00ff0f00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_events_both_edges(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0xffffffff); + writel(GPIO(0) + GP_N_EVBE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ffff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xef00ff08); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x10ffff08); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x0000f000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x10ff0f08); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x10ff0f08); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_gpion_irq(gconstpointer test_data) +{ + intptr_t n = (intptr_t)test_data; + + gpio_reset(n); + + writel(GPIO(n) + GP_N_EVTYP, 0x00000000); + writel(GPIO(n) + GP_N_DOUT, 0x00000000); + writel(GPIO(n) + GP_N_OE, 0xffffffff); + writel(GPIO(n) + GP_N_EVST, 0xffffffff); + writel(GPIO(n) + GP_N_EVEN, 0x00000000); + + /* Trigger an event; interrupts are masked. */ + g_assert_cmphex(readl(GPIO(n) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_DOS, 0x00008000); + g_assert_cmphex(readl(GPIO(n) + GP_N_EVST), ==, 0x00008000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Unmask all event interrupts; verify that the interrupt fired. */ + writel(GPIO(n) + GP_N_EVEN, 0xffffffff); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Clear the current bit, set a new bit, irq stays asserted. */ + writel(GPIO(n) + GP_N_DOC, 0x00008000); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_DOS, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVST, 0x00008000); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Mask/unmask the event that's currently active. */ + writel(GPIO(n) + GP_N_EVENC, 0x00000200); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVENS, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Clear the input and the status bit, irq is deasserted. */ + writel(GPIO(n) + GP_N_DOC, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVST, 0x00000200); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); +} + +int main(int argc, char **argv) +{ + int ret; + int i; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("/npcm7xx_gpio/dout_to_din", test_dout_to_din); + qtest_add_func("/npcm7xx_gpio/pullup_pulldown", test_pullup_pulldown); + qtest_add_func("/npcm7xx_gpio/output_enable", test_output_enable); + qtest_add_func("/npcm7xx_gpio/open_drain", test_open_drain); + qtest_add_func("/npcm7xx_gpio/polarity", test_polarity); + qtest_add_func("/npcm7xx_gpio/input_mask", test_input_mask); + qtest_add_func("/npcm7xx_gpio/temp_lock", test_temp_lock); + qtest_add_func("/npcm7xx_gpio/events/level", test_events_level); + qtest_add_func("/npcm7xx_gpio/events/rising_edge", test_events_rising_edge); + qtest_add_func("/npcm7xx_gpio/events/both_edges", test_events_both_edges); + + for (i = 0; i < NR_GPIO_DEVICES; i++) { + g_autofree char *test_name = + g_strdup_printf("/npcm7xx_gpio/gpio[%d]/irq", i); + qtest_add_data_func(test_name, (void *)(intptr_t)i, test_gpion_irq); + } + + qtest_start("-machine npcm750-evb"); + qtest_irq_intercept_in(global_qtest, "/machine/soc/a9mpcore/gic"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) softmmu_ss.add(when: 'CONFIG_ZAURUS', if_true: files('zaurus.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('imx_gpio.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_gpio.c')) softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_gpio.c')) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_gpio.c')) softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_gpio.c')) diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# npcm7xx_gpio.c +npcm7xx_gpio_read(const char *id, uint64_t offset, uint64_t value) " %s offset: 0x%04" PRIx64 " value 0x%08" PRIx64 +npcm7xx_gpio_write(const char *id, uint64_t offset, uint64_t value) "%s offset: 0x%04" PRIx64 " value 0x%08" PRIx64 +npcm7xx_gpio_set_input(const char *id, int32_t line, int32_t level) "%s line: %" PRIi32 " level: %" PRIi32 +npcm7xx_gpio_set_output(const char *id, int32_t line, int32_t level) "%s line: %" PRIi32 " level: %" PRIi32 +npcm7xx_gpio_update_events(const char *id, uint32_t evst, uint32_t even) "%s evst: 0x%08" PRIx32 " even: 0x%08" PRIx32 + # nrf51_gpio.c nrf51_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64 nrf51_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64 diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ ['prom-env-test', 'boot-serial-test'] qtests_npcm7xx = \ - ['npcm7xx_rng-test', + ['npcm7xx_gpio-test', + 'npcm7xx_rng-test', 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ -- 2.20.1 From: Zenghui Yu <yuzenghui@huawei.com> Ensure the vSMMUv3 will be restored before all PCIe devices so that DMA translation can work properly during migration. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20201019091508.197-1-yuzenghui@huawei.com Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, .minimum_version_id = 1, + .priority = MIG_PRI_IOMMU, .fields = (VMStateField[]) { VMSTATE_UINT32(features, SMMUv3State), VMSTATE_UINT8(sid_size, SMMUv3State), -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> No code out of bcm2836.c uses (or requires) the BCM283XInfo declarations. Move it locally to the C source file. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2836.h | 8 -------- hw/arm/bcm2836.c | 14 ++++++++++++++ 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ struct BCM283XState { BCM2835PeripheralState peripherals; }; -typedef struct BCM283XInfo BCM283XInfo; - -struct BCM283XClass { - DeviceClass parent_class; - const BCM283XInfo *info; -}; - - #endif /* BCM2836_H */ diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" +typedef struct BCM283XInfo BCM283XInfo; + +typedef struct BCM283XClass { + /*< private >*/ + DeviceClass parent_class; + /*< public >*/ + const BCM283XInfo *info; +} BCM283XClass; + struct BCM283XInfo { const char *name; const char *cpu_type; @@ -XXX,XX +XXX,XX @@ struct BCM283XInfo { int clusterid; }; +#define BCM283X_CLASS(klass) \ + OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) +#define BCM283X_GET_CLASS(obj) \ + OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) + static const BCM283XInfo bcm283x_socs[] = { { .name = TYPE_BCM2836, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Remove usage of TypeInfo::class_data. Instead fill the fields in the corresponding class_init(). So far all children use the same values for almost all fields, but we are going to add the BCM2711/BCM2838 SoC for the raspi4 machine which use different fields. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 108 ++++++++++++++++++++++------------------------- 1 file changed, 51 insertions(+), 57 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" -typedef struct BCM283XInfo BCM283XInfo; - typedef struct BCM283XClass { /*< private >*/ DeviceClass parent_class; /*< public >*/ - const BCM283XInfo *info; -} BCM283XClass; - -struct BCM283XInfo { const char *name; const char *cpu_type; hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; -}; +} BCM283XClass; #define BCM283X_CLASS(klass) \ OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) #define BCM283X_GET_CLASS(obj) \ OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) -static const BCM283XInfo bcm283x_socs[] = { - { - .name = TYPE_BCM2836, - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"), - .peri_base = 0x3f000000, - .ctrl_base = 0x40000000, - .clusterid = 0xf, - }, -#ifdef TARGET_AARCH64 - { - .name = TYPE_BCM2837, - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"), - .peri_base = 0x3f000000, - .ctrl_base = 0x40000000, - .clusterid = 0x0, - }, -#endif -}; - static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); BCM283XClass *bc = BCM283X_GET_CLASS(obj); - const BCM283XInfo *info = bc->info; int n; for (n = 0; n < BCM283X_NCPUS; n++) { object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, - info->cpu_type); + bc->cpu_type); } object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); BCM283XClass *bc = BCM283X_GET_CLASS(dev); - const BCM283XInfo *info = bc->info; Object *obj; int n; @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) "sd-bus"); sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0, - info->peri_base, 1); + bc->peri_base, 1); /* bcm2836 interrupt controller (and mailboxes, etc.) */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->control), errp)) { return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, info->ctrl_base); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, bc->ctrl_base); sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0, qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0)); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) for (n = 0; n < BCM283X_NCPUS; n++) { /* TODO: this should be converted to a property of ARM_CPU */ - s->cpu[n].core.mp_affinity = (info->clusterid << 8) | n; + s->cpu[n].core.mp_affinity = (bc->clusterid << 8) | n; /* set periphbase/CBAR value for CPU-local registers */ if (!object_property_set_int(OBJECT(&s->cpu[n].core), "reset-cbar", - info->peri_base, errp)) { + bc->peri_base, errp)) { return; } @@ -XXX,XX +XXX,XX @@ static Property bcm2836_props[] = { static void bcm283x_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); - BCM283XClass *bc = BCM283X_CLASS(oc); - bc->info = data; - dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); /* Reason: Must be wired up in code (see raspi_init() function) */ dc->user_creatable = false; } -static const TypeInfo bcm283x_type_info = { - .name = TYPE_BCM283X, - .parent = TYPE_DEVICE, - .instance_size = sizeof(BCM283XState), - .instance_init = bcm2836_init, - .class_size = sizeof(BCM283XClass), - .abstract = true, +static void bcm2836_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); + + bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + bc->peri_base = 0x3f000000; + bc->ctrl_base = 0x40000000; + bc->clusterid = 0xf; + dc->realize = bcm2836_realize; + device_class_set_props(dc, bcm2836_props); }; -static void bcm2836_register_types(void) +#ifdef TARGET_AARCH64 +static void bcm2837_class_init(ObjectClass *oc, void *data) { - int i; + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); - type_register_static(&bcm283x_type_info); - for (i = 0; i < ARRAY_SIZE(bcm283x_socs); i++) { - TypeInfo ti = { - .name = bcm283x_socs[i].name, - .parent = TYPE_BCM283X, - .class_init = bcm283x_class_init, - .class_data = (void *) &bcm283x_socs[i], - }; - type_register(&ti); + bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); + bc->peri_base = 0x3f000000; + bc->ctrl_base = 0x40000000; + bc->clusterid = 0x0; + dc->realize = bcm2836_realize; + device_class_set_props(dc, bcm2836_props); +}; +#endif + +static const TypeInfo bcm283x_types[] = { + { + .name = TYPE_BCM2836, + .parent = TYPE_BCM283X, + .class_init = bcm2836_class_init, +#ifdef TARGET_AARCH64 + }, { + .name = TYPE_BCM2837, + .parent = TYPE_BCM283X, + .class_init = bcm2837_class_init, +#endif + }, { + .name = TYPE_BCM283X, + .parent = TYPE_DEVICE, + .instance_size = sizeof(BCM283XState), + .instance_init = bcm2836_init, + .class_size = sizeof(BCM283XClass), + .class_init = bcm283x_class_init, + .abstract = true, } -} +}; -type_init(bcm2836_register_types) +DEFINE_TYPES(bcm283x_types) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The BCM2835 has only one core. Introduce the core_count field to be able to use values different than BCM283X_NCPUS (4). Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { /*< public >*/ const char *name; const char *cpu_type; + unsigned core_count; hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) BCM283XClass *bc = BCM283X_GET_CLASS(obj); int n; - for (n = 0; n < BCM283X_NCPUS; n++) { + for (n = 0; n < bc->core_count; n++) { object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, bc->cpu_type); } @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) BCM283XClass *bc = BCM283X_CLASS(oc); bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + bc->core_count = BCM283X_NCPUS; bc->peri_base = 0x3f000000; bc->ctrl_base = 0x40000000; bc->clusterid = 0xf; @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) BCM283XClass *bc = BCM283X_CLASS(oc); bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); + bc->core_count = BCM283X_NCPUS; bc->peri_base = 0x3f000000; bc->ctrl_base = 0x40000000; bc->clusterid = 0x0; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> It makes no sense to set enabled-cpus=0 on single core SoCs. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { #define BCM283X_GET_CLASS(obj) \ OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) +static Property bcm2836_enabled_cores_property = + DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0); + static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, bc->cpu_type); } + if (bc->core_count > 1) { + qdev_property_add_static(DEVICE(obj), &bcm2836_enabled_cores_property); + qdev_prop_set_uint32(DEVICE(obj), "enabled-cpus", bc->core_count); + } object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) } } -static Property bcm2836_props[] = { - DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, - BCM283X_NCPUS), - DEFINE_PROP_END_OF_LIST() -}; - static void bcm283x_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) bc->ctrl_base = 0x40000000; bc->clusterid = 0xf; dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); }; #ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) bc->ctrl_base = 0x40000000; bc->clusterid = 0x0; dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); }; #endif -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The realize() function is clearly composed of two parts, each described by a comment: void realize() { /* common peripherals from bcm2835 */ ... /* bcm2836 interrupt controller (and mailboxes, etc.) */ ... } Split the two part, so we can reuse the common part with other SoCs from this family. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) qdev_prop_set_uint32(DEVICE(obj), "enabled-cpus", bc->core_count); } - object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); + if (bc->ctrl_base) { + object_initialize_child(obj, "control", &s->control, + TYPE_BCM2836_CONTROL); + } object_initialize_child(obj, "peripherals", &s->peripherals, TYPE_BCM2835_PERIPHERALS); @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) "vcram-size"); } -static void bcm2836_realize(DeviceState *dev, Error **errp) +static bool bcm283x_common_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); BCM283XClass *bc = BCM283X_GET_CLASS(dev); Object *obj; - int n; /* common peripherals from bcm2835 */ @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) object_property_add_const_link(OBJECT(&s->peripherals), "ram", obj); if (!sysbus_realize(SYS_BUS_DEVICE(&s->peripherals), errp)) { - return; + return false; } object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->peripherals), @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0, bc->peri_base, 1); + return true; +} + +static void bcm2836_realize(DeviceState *dev, Error **errp) +{ + BCM283XState *s = BCM283X(dev); + BCM283XClass *bc = BCM283X_GET_CLASS(dev); + int n; + + if (!bcm283x_common_realize(dev, errp)) { + return; + } /* bcm2836 interrupt controller (and mailboxes, etc.) */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->control), errp)) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-7-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2836.h | 1 + hw/arm/bcm2836.c | 34 ++++++++++++++++++++++++++++++++++ hw/arm/raspi.c | 2 ++ 3 files changed, 37 insertions(+) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) * them, code using these devices should always handle them via the * BCM283x base class, so they have no BCM2836(obj) etc macros. */ +#define TYPE_BCM2835 "bcm2835" #define TYPE_BCM2836 "bcm2836" #define TYPE_BCM2837 "bcm2837" diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static bool bcm283x_common_realize(DeviceState *dev, Error **errp) return true; } +static void bcm2835_realize(DeviceState *dev, Error **errp) +{ + BCM283XState *s = BCM283X(dev); + + if (!bcm283x_common_realize(dev, errp)) { + return; + } + + if (!qdev_realize(DEVICE(&s->cpu[0].core), NULL, errp)) { + return; + } + + /* Connect irq/fiq outputs from the interrupt controller. */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0, + qdev_get_gpio_in(DEVICE(&s->cpu[0].core), ARM_CPU_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1, + qdev_get_gpio_in(DEVICE(&s->cpu[0].core), ARM_CPU_FIQ)); +} + static void bcm2836_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); @@ -XXX,XX +XXX,XX @@ static void bcm283x_class_init(ObjectClass *oc, void *data) dc->user_creatable = false; } +static void bcm2835_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); + + bc->cpu_type = ARM_CPU_TYPE_NAME("arm1176"); + bc->core_count = 1; + bc->peri_base = 0x20000000; + dc->realize = bcm2835_realize; +}; + static void bcm2836_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) static const TypeInfo bcm283x_types[] = { { + .name = TYPE_BCM2835, + .parent = TYPE_BCM283X, + .class_init = bcm2835_class_init, + }, { .name = TYPE_BCM2836, .parent = TYPE_BCM283X, .class_init = bcm2836_class_init, diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ FIELD(REV_CODE, MEMORY_SIZE, 20, 3); FIELD(REV_CODE, STYLE, 23, 1); typedef enum RaspiProcessorId { + PROCESSOR_ID_BCM2835 = 0, PROCESSOR_ID_BCM2836 = 1, PROCESSOR_ID_BCM2837 = 2, } RaspiProcessorId; @@ -XXX,XX +XXX,XX @@ static const struct { const char *type; int cores_count; } soc_property[] = { + [PROCESSOR_ID_BCM2835] = {TYPE_BCM2835, 1}, [PROCESSOR_ID_BCM2836] = {TYPE_BCM2836, BCM283X_NCPUS}, [PROCESSOR_ID_BCM2837] = {TYPE_BCM2837, BCM283X_NCPUS}, }; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Pi A is almost the first machine released. It uses a BCM2835 SoC which includes a ARMv6Z core. Example booting the machine using content from [*] (we use the device tree from the B model): $ qemu-system-arm -M raspi1ap -serial stdio \ -kernel raspberrypi/firmware/boot/kernel.img \ -dtb raspberrypi/firmware/boot/bcm2708-rpi-b-plus.dtb \ -append 'earlycon=pl011,0x20201000 console=ttyAMA0' [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B+ ... [*] http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20200512-2_armhf.deb Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_machine_class_common_init(MachineClass *mc, mc->default_ram_id = "ram"; }; +static void raspi1ap_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x900021; /* Revision 1.1 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi2b_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void raspi3b_machine_class_init(ObjectClass *oc, void *data) static const TypeInfo raspi_machine_types[] = { { + .name = MACHINE_TYPE_NAME("raspi1ap"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi1ap_machine_class_init, + }, { .name = MACHINE_TYPE_NAME("raspi2b"), .parent = TYPE_RASPI_MACHINE, .class_init = raspi2b_machine_class_init, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Similarly to the Pi A, the Pi Zero uses a BCM2835 SoC (ARMv6Z core). The only difference between the revision 1.2 and 1.3 is the latter exposes a CSI camera connector. As we do not implement the Unicam peripheral, there is no point in exposing a camera connector :) Therefore we choose to model the 1.2 revision. Example booting the machine using content from [*]: $ qemu-system-arm -M raspi0 -serial stdio \ -kernel raspberrypi/firmware/boot/kernel.img \ -dtb raspberrypi/firmware/boot/bcm2708-rpi-zero.dtb \ -append 'printk.time=0 earlycon=pl011,0x20201000 console=ttyAMA0' [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero ... [*] http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20200512-2_armhf.deb Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-9-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_machine_class_common_init(MachineClass *mc, mc->default_ram_id = "ram"; }; +static void raspi0_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x920092; /* Revision 1.2 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi1ap_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void raspi3b_machine_class_init(ObjectClass *oc, void *data) static const TypeInfo raspi_machine_types[] = { { + .name = MACHINE_TYPE_NAME("raspi0"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi0_machine_class_init, + }, { .name = MACHINE_TYPE_NAME("raspi1ap"), .parent = TYPE_RASPI_MACHINE, .class_init = raspi1ap_machine_class_init, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Pi 3A+ is a stripped down version of the 3B: - 512 MiB of RAM instead of 1 GiB - no on-board ethernet chipset Add it as it is a closer match to what we model. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi2b_machine_class_init(ObjectClass *oc, void *data) }; #ifdef TARGET_AARCH64 +static void raspi3ap_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x9020e0; /* Revision 1.0 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi3b_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const TypeInfo raspi_machine_types[] = { .parent = TYPE_RASPI_MACHINE, .class_init = raspi2b_machine_class_init, #ifdef TARGET_AARCH64 + }, { + .name = MACHINE_TYPE_NAME("raspi3ap"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi3ap_machine_class_init, }, { .name = MACHINE_TYPE_NAME("raspi3b"), .parent = TYPE_RASPI_MACHINE, -- 2.20.1 From: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Use of 0x%d - make up our mind as 0x%x Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Eric Auger <eric.auger@redhat.com> Message-id: 20201014193355.53074-1-dgilbert@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/trace-events | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/trace-events b/hw/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/trace-events +++ b/hw/arm/trace-events @@ -XXX,XX +XXX,XX @@ smmuv3_get_cd(uint64_t addr) "CD addr: 0x%"PRIx64 smmuv3_decode_cd(uint32_t oas) "oas=%d" smmuv3_decode_cd_tt(int i, uint32_t tsz, uint64_t ttb, uint32_t granule_sz, bool had) "TT[%d]:tsz:%d ttb:0x%"PRIx64" granule_sz:%d had:%d" smmuv3_cmdq_cfgi_ste(int streamid) "streamid =%d" -smmuv3_cmdq_cfgi_ste_range(int start, int end) "start=0x%d - end=0x%d" +smmuv3_cmdq_cfgi_ste_range(int start, int end) "start=0x%x - end=0x%x" smmuv3_cmdq_cfgi_cd(uint32_t sid) "streamid = %d" smmuv3_config_cache_hit(uint32_t sid, uint32_t hits, uint32_t misses, uint32_t perc) "Config cache HIT for sid %d (hits=%d, misses=%d, hit rate=%d)" smmuv3_config_cache_miss(uint32_t sid, uint32_t hits, uint32_t misses, uint32_t perc) "Config cache MISS for sid %d (hits=%d, misses=%d, hit rate=%d)" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ extern const VMStateDescription vmstate_clock; VMSTATE_CLOCK_V(field, state, 0) #define VMSTATE_CLOCK_V(field, state, version) \ VMSTATE_STRUCT_POINTER_V(field, state, version, vmstate_clock, Clock) +#define VMSTATE_ARRAY_CLOCK(field, state, num) \ + VMSTATE_ARRAY_CLOCK_V(field, state, num, 0) +#define VMSTATE_ARRAY_CLOCK_V(field, state, num, version) \ + VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(field, state, num, version, \ + vmstate_clock, Clock) /** * clock_setup_canonical_path: -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The nanosecond unit greatly limits the dynamic range we can display in clock value traces, for values in the order of 1GHz and more. The internal representation can go way beyond this value and it is quite common for today's clocks to be within those ranges. For example, a frequency between 500MHz+ and 1GHz will be displayed as 1ns. Beyond 1GHz, it will show up as 0ns. Replace nanosecond periods traces with frequencies in the Hz unit to have more dynamic range in the trace output. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/clock.c | 6 +++--- hw/core/trace-events | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/hw/core/clock.c b/hw/core/clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/clock.c +++ b/hw/core/clock.c @@ -XXX,XX +XXX,XX @@ bool clock_set(Clock *clk, uint64_t period) if (clk->period == period) { return false; } - trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_NS(clk->period), - CLOCK_PERIOD_TO_NS(period)); + trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_HZ(clk->period), + CLOCK_PERIOD_TO_HZ(period)); clk->period = period; return true; @@ -XXX,XX +XXX,XX @@ static void clock_propagate_period(Clock *clk, bool call_callbacks) if (child->period != clk->period) { child->period = clk->period; trace_clock_update(CLOCK_PATH(child), CLOCK_PATH(clk), - CLOCK_PERIOD_TO_NS(clk->period), + CLOCK_PERIOD_TO_HZ(clk->period), call_callbacks); if (call_callbacks && child->callback) { child->callback(child->callback_opaque); diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ resettable_transitional_function(void *obj, const char *objtype) "obj=%p(%s)" # clock.c clock_set_source(const char *clk, const char *src) "'%s', src='%s'" clock_disconnect(const char *clk) "'%s'" -clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', ns=%"PRIu64"->%"PRIu64 +clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', %"PRIu64"Hz->%"PRIu64"Hz" clock_propagate(const char *clk) "'%s'" -clock_update(const char *clk, const char *src, uint64_t val, int cb) "'%s', src='%s', ns=%"PRIu64", cb=%d" +clock_update(const char *clk, const char *src, uint64_t hz, int cb) "'%s', src='%s', val=%"PRIu64"Hz cb=%d" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The CPRMAN (clock controller) was mapped at the watchdog/power manager address. It was also split into two unimplemented peripherals (CM and A2W) but this is really the same one, as shown by this extract of the Raspberry Pi 3 Linux device tree: watchdog@7e100000 { compatible = "brcm,bcm2835-pm\0brcm,bcm2835-pm-wdt"; [...] reg = <0x7e100000 0x114 0x7e00a000 0x24>; [...] }; [...] cprman@7e101000 { compatible = "brcm,bcm2835-cprman"; [...] reg = <0x7e101000 0x2000>; [...] }; Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 2 +- include/hw/arm/raspi_platform.h | 5 ++--- hw/arm/bcm2835_peripherals.c | 4 ++-- 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ struct BCM2835PeripheralState { BCM2835MphiState mphi; UnimplementedDeviceState txp; UnimplementedDeviceState armtmr; + UnimplementedDeviceState powermgt; UnimplementedDeviceState cprman; - UnimplementedDeviceState a2w; PL011State uart0; BCM2835AuxState aux; BCM2835FBState fb; diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/raspi_platform.h +++ b/include/hw/arm/raspi_platform.h @@ -XXX,XX +XXX,XX @@ #define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 (SP804) */ #define ARMCTRL_0_SBM_OFFSET (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores * Doorbells & Mailboxes */ -#define CPRMAN_OFFSET 0x100000 /* Power Management, Watchdog */ -#define CM_OFFSET 0x101000 /* Clock Management */ -#define A2W_OFFSET 0x102000 /* Reset controller */ +#define PM_OFFSET 0x100000 /* Power Management */ +#define CPRMAN_OFFSET 0x101000 /* Clock Management */ #define AVS_OFFSET 0x103000 /* Audio Video Standard */ #define RNG_OFFSET 0x104000 #define GPIO_OFFSET 0x200000 diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000); create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); - create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); - create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); + create_unimp(s, &s->powermgt, "bcm2835-powermgt", PM_OFFSET, 0x114); + create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x2000); create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100); create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100); create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a main oscillator, and several sub-components (PLLs, multiplexers, ...) to generate the BCM2835 clock tree. This commit adds a skeleton of the CPRMAN, with a dummy register read/write implementation. It embeds the main oscillator (xosc) from which all the clocks will be derived. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 3 +- include/hw/misc/bcm2835_cprman.h | 37 +++++ include/hw/misc/bcm2835_cprman_internals.h | 24 +++ hw/arm/bcm2835_peripherals.c | 11 +- hw/misc/bcm2835_cprman.c | 163 +++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 5 + 7 files changed, 242 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/bcm2835_cprman.h create mode 100644 include/hw/misc/bcm2835_cprman_internals.h create mode 100644 hw/misc/bcm2835_cprman.c diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_mbox.h" #include "hw/misc/bcm2835_mphi.h" #include "hw/misc/bcm2835_thermal.h" +#include "hw/misc/bcm2835_cprman.h" #include "hw/sd/sdhci.h" #include "hw/sd/bcm2835_sdhost.h" #include "hw/gpio/bcm2835_gpio.h" @@ -XXX,XX +XXX,XX @@ struct BCM2835PeripheralState { UnimplementedDeviceState txp; UnimplementedDeviceState armtmr; UnimplementedDeviceState powermgt; - UnimplementedDeviceState cprman; + BCM2835CprmanState cprman; PL011State uart0; BCM2835AuxState aux; BCM2835FBState fb; diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_CPRMAN_H +#define HW_MISC_CPRMAN_H + +#include "hw/sysbus.h" +#include "hw/qdev-clock.h" + +#define TYPE_BCM2835_CPRMAN "bcm2835-cprman" + +typedef struct BCM2835CprmanState BCM2835CprmanState; + +DECLARE_INSTANCE_CHECKER(BCM2835CprmanState, CPRMAN, + TYPE_BCM2835_CPRMAN) + +#define CPRMAN_NUM_REGS (0x2000 / sizeof(uint32_t)) + +struct BCM2835CprmanState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t regs[CPRMAN_NUM_REGS]; + uint32_t xosc_freq; + + Clock *xosc; +}; + +#endif diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_CPRMAN_INTERNALS_H +#define HW_MISC_CPRMAN_INTERNALS_H + +#include "hw/registerfields.h" +#include "hw/misc/bcm2835_cprman.h" + +/* Register map */ + +/* + * This field is common to all registers. Each register write value must match + * the CPRMAN_PASSWORD magic value in its 8 MSB. + */ +FIELD(CPRMAN, PASSWORD, 24, 8) +#define CPRMAN_PASSWORD 0x5a + +#endif diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) /* DWC2 */ object_initialize_child(obj, "dwc2", &s->dwc2, TYPE_DWC2_USB); + /* CPRMAN clock manager */ + object_initialize_child(obj, "cprman", &s->cprman, TYPE_BCM2835_CPRMAN); + object_property_add_const_link(OBJECT(&s->dwc2), "dma-mr", OBJECT(&s->gpu_bus_mr)); } @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) return; } + /* CPRMAN clock manager */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->cprman), errp)) { + return; + } + memory_region_add_subregion(&s->peri_mr, CPRMAN_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cprman), 0)); + memory_region_add_subregion(&s->peri_mr, ARMCTRL_IC_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ic), 0)); sysbus_pass_irq(SYS_BUS_DEVICE(s), SYS_BUS_DEVICE(&s->ic)); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000); create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->powermgt, "bcm2835-powermgt", PM_OFFSET, 0x114); - create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x2000); create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100); create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100); create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20); diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * This peripheral is roughly divided into 3 main parts: + * - the PLLs + * - the PLL channels + * - the clock muxes + * + * A main oscillator (xosc) feeds all the PLLs. Each PLLs has one or more + * channels. Those channel are then connected to the clock muxes. Each mux has + * multiples sources (usually the xosc, some of the PLL channels and some "test + * debug" clocks). A mux is configured to select a given source through its + * control register. Each mux has one output clock that also goes out of the + * CPRMAN. This output clock usually connects to another peripheral in the SoC + * (so a given mux is dedicated to a peripheral). + * + * At each level (PLL, channel and mux), the clock can be altered through + * dividers (and multipliers in case of the PLLs), and can be disabled (in this + * case, the next levels see no clock). + * + * This can be sum-up as follows (this is an example and not the actual BCM2835 + * clock tree): + * + * /-->[PLL]-|->[PLL channel]--... [mux]--> to peripherals + * | |->[PLL channel] muxes takes [mux] + * | \->[PLL channel] inputs from [mux] + * | some channels [mux] + * [xosc]---|-->[PLL]-|->[PLL channel] and other srcs [mux] + * | \->[PLL channel] ...-->[mux] + * | [mux] + * \-->[PLL]--->[PLL channel] [mux] + * + * The page at https://elinux.org/The_Undocumented_Pi gives the actual clock + * tree configuration. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "hw/misc/bcm2835_cprman.h" +#include "hw/misc/bcm2835_cprman_internals.h" +#include "trace.h" + +/* CPRMAN "top level" model */ + +static uint64_t cprman_read(void *opaque, hwaddr offset, + unsigned size) +{ + BCM2835CprmanState *s = CPRMAN(opaque); + uint64_t r = 0; + size_t idx = offset / sizeof(uint32_t); + + switch (idx) { + default: + r = s->regs[idx]; + } + + trace_bcm2835_cprman_read(offset, r); + return r; +} + +static void cprman_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + BCM2835CprmanState *s = CPRMAN(opaque); + size_t idx = offset / sizeof(uint32_t); + + if (FIELD_EX32(value, CPRMAN, PASSWORD) != CPRMAN_PASSWORD) { + trace_bcm2835_cprman_write_invalid_magic(offset, value); + return; + } + + value &= ~R_CPRMAN_PASSWORD_MASK; + + trace_bcm2835_cprman_write(offset, value); + s->regs[idx] = value; + +} + +static const MemoryRegionOps cprman_ops = { + .read = cprman_read, + .write = cprman_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + /* + * Although this hasn't been checked against real hardware, nor the + * information can be found in a datasheet, it seems reasonable because + * of the "PASSWORD" magic value found in every registers. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, + .impl = { + .max_access_size = 4, + }, +}; + +static void cprman_reset(DeviceState *dev) +{ + BCM2835CprmanState *s = CPRMAN(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + clock_update_hz(s->xosc, s->xosc_freq); +} + +static void cprman_init(Object *obj) +{ + BCM2835CprmanState *s = CPRMAN(obj); + + s->xosc = clock_new(obj, "xosc"); + + memory_region_init_io(&s->iomem, obj, &cprman_ops, + s, "bcm2835-cprman", 0x2000); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); +} + +static const VMStateDescription cprman_vmstate = { + .name = TYPE_BCM2835_CPRMAN, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, BCM2835CprmanState, CPRMAN_NUM_REGS), + VMSTATE_END_OF_LIST() + } +}; + +static Property cprman_properties[] = { + DEFINE_PROP_UINT32("xosc-freq-hz", BCM2835CprmanState, xosc_freq, 19200000), + DEFINE_PROP_END_OF_LIST() +}; + +static void cprman_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = cprman_reset; + dc->vmsd = &cprman_vmstate; + device_class_set_props(dc, cprman_properties); +} + +static const TypeInfo cprman_info = { + .name = TYPE_BCM2835_CPRMAN, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835CprmanState), + .class_init = cprman_class_init, + .instance_init = cprman_init, +}; + +static void cprman_register_types(void) +{ + type_register_static(&cprman_info); +} + +type_init(cprman_register_types); diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files( 'bcm2835_property.c', 'bcm2835_rng.c', 'bcm2835_thermal.c', + 'bcm2835_cprman.c', )) softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c')) softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c', 'zynq-xadc.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ grlib_apb_pnp_read(uint64_t addr, uint32_t value) "APB PnP read addr:0x%03"PRIx6 # pca9552.c pca955x_gpio_status(const char *description, const char *buf) "%s GPIOs 0-15 [%s]" pca955x_gpio_change(const char *description, unsigned id, unsigned prev_state, unsigned current_state) "%s GPIO id:%u status: %u -> %u" + +# bcm2835_cprman.c +bcm2835_cprman_read(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 +bcm2835_cprman_write(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 +bcm2835_cprman_write_invalid_magic(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 -- 2.20.1 From: Luc Michel <luc@lmichel.fr> There are 5 PLLs in the CPRMAN, namely PLL A, C, D, H and B. All of them take the xosc clock as input and produce a new clock. This commit adds a skeleton implementation for the PLLs as sub-devices of the CPRMAN. The PLLs are instantiated and connected internally to the main oscillator. Each PLL has 6 registers : CM, A2W_CTRL, A2W_ANA[0,1,2,3], A2W_FRAC. A write to any of them triggers a call to the (not yet implemented) pll_update function. If the main oscillator changes frequency, an update is also triggered. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 29 +++++ include/hw/misc/bcm2835_cprman_internals.h | 144 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 108 ++++++++++++++++ 3 files changed, 281 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(BCM2835CprmanState, CPRMAN, #define CPRMAN_NUM_REGS (0x2000 / sizeof(uint32_t)) +typedef enum CprmanPll { + CPRMAN_PLLA = 0, + CPRMAN_PLLC, + CPRMAN_PLLD, + CPRMAN_PLLH, + CPRMAN_PLLB, + + CPRMAN_NUM_PLL +} CprmanPll; + +typedef struct CprmanPllState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanPll id; + + uint32_t *reg_cm; + uint32_t *reg_a2w_ctrl; + uint32_t *reg_a2w_ana; /* ANA[0] .. ANA[3] */ + uint32_t prediv_mask; /* prediv bit in ana[1] */ + uint32_t *reg_a2w_frac; + + Clock *xosc_in; + Clock *out; +} CprmanPllState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { /*< public >*/ MemoryRegion iomem; + CprmanPllState plls[CPRMAN_NUM_PLL]; + uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #include "hw/registerfields.h" #include "hw/misc/bcm2835_cprman.h" +#define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" + +DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, + TYPE_CPRMAN_PLL) + /* Register map */ +/* PLLs */ +REG32(CM_PLLA, 0x104) + FIELD(CM_PLLA, LOADDSI0, 0, 1) + FIELD(CM_PLLA, HOLDDSI0, 1, 1) + FIELD(CM_PLLA, LOADCCP2, 2, 1) + FIELD(CM_PLLA, HOLDCCP2, 3, 1) + FIELD(CM_PLLA, LOADCORE, 4, 1) + FIELD(CM_PLLA, HOLDCORE, 5, 1) + FIELD(CM_PLLA, LOADPER, 6, 1) + FIELD(CM_PLLA, HOLDPER, 7, 1) + FIELD(CM_PLLx, ANARST, 8, 1) +REG32(CM_PLLC, 0x108) + FIELD(CM_PLLC, LOADCORE0, 0, 1) + FIELD(CM_PLLC, HOLDCORE0, 1, 1) + FIELD(CM_PLLC, LOADCORE1, 2, 1) + FIELD(CM_PLLC, HOLDCORE1, 3, 1) + FIELD(CM_PLLC, LOADCORE2, 4, 1) + FIELD(CM_PLLC, HOLDCORE2, 5, 1) + FIELD(CM_PLLC, LOADPER, 6, 1) + FIELD(CM_PLLC, HOLDPER, 7, 1) +REG32(CM_PLLD, 0x10c) + FIELD(CM_PLLD, LOADDSI0, 0, 1) + FIELD(CM_PLLD, HOLDDSI0, 1, 1) + FIELD(CM_PLLD, LOADDSI1, 2, 1) + FIELD(CM_PLLD, HOLDDSI1, 3, 1) + FIELD(CM_PLLD, LOADCORE, 4, 1) + FIELD(CM_PLLD, HOLDCORE, 5, 1) + FIELD(CM_PLLD, LOADPER, 6, 1) + FIELD(CM_PLLD, HOLDPER, 7, 1) +REG32(CM_PLLH, 0x110) + FIELD(CM_PLLH, LOADPIX, 0, 1) + FIELD(CM_PLLH, LOADAUX, 1, 1) + FIELD(CM_PLLH, LOADRCAL, 2, 1) +REG32(CM_PLLB, 0x170) + FIELD(CM_PLLB, LOADARM, 0, 1) + FIELD(CM_PLLB, HOLDARM, 1, 1) + +REG32(A2W_PLLA_CTRL, 0x1100) + FIELD(A2W_PLLx_CTRL, NDIV, 0, 10) + FIELD(A2W_PLLx_CTRL, PDIV, 12, 3) + FIELD(A2W_PLLx_CTRL, PWRDN, 16, 1) + FIELD(A2W_PLLx_CTRL, PRST_DISABLE, 17, 1) +REG32(A2W_PLLC_CTRL, 0x1120) +REG32(A2W_PLLD_CTRL, 0x1140) +REG32(A2W_PLLH_CTRL, 0x1160) +REG32(A2W_PLLB_CTRL, 0x11e0) + +REG32(A2W_PLLA_ANA0, 0x1010) +REG32(A2W_PLLA_ANA1, 0x1014) + FIELD(A2W_PLLx_ANA1, FB_PREDIV, 14, 1) +REG32(A2W_PLLA_ANA2, 0x1018) +REG32(A2W_PLLA_ANA3, 0x101c) + +REG32(A2W_PLLC_ANA0, 0x1030) +REG32(A2W_PLLC_ANA1, 0x1034) +REG32(A2W_PLLC_ANA2, 0x1038) +REG32(A2W_PLLC_ANA3, 0x103c) + +REG32(A2W_PLLD_ANA0, 0x1050) +REG32(A2W_PLLD_ANA1, 0x1054) +REG32(A2W_PLLD_ANA2, 0x1058) +REG32(A2W_PLLD_ANA3, 0x105c) + +REG32(A2W_PLLH_ANA0, 0x1070) +REG32(A2W_PLLH_ANA1, 0x1074) + FIELD(A2W_PLLH_ANA1, FB_PREDIV, 11, 1) +REG32(A2W_PLLH_ANA2, 0x1078) +REG32(A2W_PLLH_ANA3, 0x107c) + +REG32(A2W_PLLB_ANA0, 0x10f0) +REG32(A2W_PLLB_ANA1, 0x10f4) +REG32(A2W_PLLB_ANA2, 0x10f8) +REG32(A2W_PLLB_ANA3, 0x10fc) + +REG32(A2W_PLLA_FRAC, 0x1200) + FIELD(A2W_PLLx_FRAC, FRAC, 0, 20) +REG32(A2W_PLLC_FRAC, 0x1220) +REG32(A2W_PLLD_FRAC, 0x1240) +REG32(A2W_PLLH_FRAC, 0x1260) +REG32(A2W_PLLB_FRAC, 0x12e0) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. @@ -XXX,XX +XXX,XX @@ FIELD(CPRMAN, PASSWORD, 24, 8) #define CPRMAN_PASSWORD 0x5a +/* PLL init info */ +typedef struct PLLInitInfo { + const char *name; + size_t cm_offset; + size_t a2w_ctrl_offset; + size_t a2w_ana_offset; + uint32_t prediv_mask; /* Prediv bit in ana[1] */ + size_t a2w_frac_offset; +} PLLInitInfo; + +#define FILL_PLL_INIT_INFO(pll_) \ + .cm_offset = R_CM_ ## pll_, \ + .a2w_ctrl_offset = R_A2W_ ## pll_ ## _CTRL, \ + .a2w_ana_offset = R_A2W_ ## pll_ ## _ANA0, \ + .a2w_frac_offset = R_A2W_ ## pll_ ## _FRAC + +static const PLLInitInfo PLL_INIT_INFO[] = { + [CPRMAN_PLLA] = { + .name = "plla", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLA), + }, + [CPRMAN_PLLC] = { + .name = "pllc", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLC), + }, + [CPRMAN_PLLD] = { + .name = "plld", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLD), + }, + [CPRMAN_PLLH] = { + .name = "pllh", + .prediv_mask = R_A2W_PLLH_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLH), + }, + [CPRMAN_PLLB] = { + .name = "pllb", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLB), + }, +}; + +#undef FILL_PLL_CHANNEL_INIT_INFO + +static inline void set_pll_init_info(BCM2835CprmanState *s, + CprmanPllState *pll, + CprmanPll id) +{ + pll->id = id; + pll->reg_cm = &s->regs[PLL_INIT_INFO[id].cm_offset]; + pll->reg_a2w_ctrl = &s->regs[PLL_INIT_INFO[id].a2w_ctrl_offset]; + pll->reg_a2w_ana = &s->regs[PLL_INIT_INFO[id].a2w_ana_offset]; + pll->prediv_mask = PLL_INIT_INFO[id].prediv_mask; + pll->reg_a2w_frac = &s->regs[PLL_INIT_INFO[id].a2w_frac_offset]; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_cprman_internals.h" #include "trace.h" +/* PLL */ + +static void pll_update(CprmanPllState *pll) +{ + clock_update(pll->out, 0); +} + +static void pll_xosc_update(void *opaque) +{ + pll_update(CPRMAN_PLL(opaque)); +} + +static void pll_init(Object *obj) +{ + CprmanPllState *s = CPRMAN_PLL(obj); + + s->xosc_in = qdev_init_clock_in(DEVICE(s), "xosc-in", pll_xosc_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription pll_vmstate = { + .name = TYPE_CPRMAN_PLL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(xosc_in, CprmanPllState), + VMSTATE_END_OF_LIST() + } +}; + +static void pll_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &pll_vmstate; +} + +static const TypeInfo cprman_pll_info = { + .name = TYPE_CPRMAN_PLL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanPllState), + .class_init = pll_class_init, + .instance_init = pll_init, +}; + + /* CPRMAN "top level" model */ static uint64_t cprman_read(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, return r; } +#define CASE_PLL_REGS(pll_) \ + case R_CM_ ## pll_: \ + case R_A2W_ ## pll_ ## _CTRL: \ + case R_A2W_ ## pll_ ## _ANA0: \ + case R_A2W_ ## pll_ ## _ANA1: \ + case R_A2W_ ## pll_ ## _ANA2: \ + case R_A2W_ ## pll_ ## _ANA3: \ + case R_A2W_ ## pll_ ## _FRAC + static void cprman_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, trace_bcm2835_cprman_write(offset, value); s->regs[idx] = value; + switch (idx) { + CASE_PLL_REGS(PLLA) : + pll_update(&s->plls[CPRMAN_PLLA]); + break; + + CASE_PLL_REGS(PLLC) : + pll_update(&s->plls[CPRMAN_PLLC]); + break; + + CASE_PLL_REGS(PLLD) : + pll_update(&s->plls[CPRMAN_PLLD]); + break; + + CASE_PLL_REGS(PLLH) : + pll_update(&s->plls[CPRMAN_PLLH]); + break; + + CASE_PLL_REGS(PLLB) : + pll_update(&s->plls[CPRMAN_PLLB]); + break; + } } +#undef CASE_PLL_REGS + static const MemoryRegionOps cprman_ops = { .read = cprman_read, .write = cprman_write, @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cprman_ops = { static void cprman_reset(DeviceState *dev) { BCM2835CprmanState *s = CPRMAN(dev); + size_t i; memset(s->regs, 0, sizeof(s->regs)); + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + device_cold_reset(DEVICE(&s->plls[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } static void cprman_init(Object *obj) { BCM2835CprmanState *s = CPRMAN(obj); + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + object_initialize_child(obj, PLL_INIT_INFO[i].name, + &s->plls[i], TYPE_CPRMAN_PLL); + set_pll_init_info(s, &s->plls[i], i); + } s->xosc = clock_new(obj, "xosc"); @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void cprman_realize(DeviceState *dev, Error **errp) +{ + BCM2835CprmanState *s = CPRMAN(dev); + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + CprmanPllState *pll = &s->plls[i]; + + clock_set_source(pll->xosc_in, s->xosc); + + if (!qdev_realize(DEVICE(pll), NULL, errp)) { + return; + } + } +} + static const VMStateDescription cprman_vmstate = { .name = TYPE_BCM2835_CPRMAN, .version_id = 1, @@ -XXX,XX +XXX,XX @@ static void cprman_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = cprman_realize; dc->reset = cprman_reset; dc->vmsd = &cprman_vmstate; device_class_set_props(dc, cprman_properties); @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_info = { static void cprman_register_types(void) { type_register_static(&cprman_info); + type_register_static(&cprman_pll_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The CPRMAN PLLs generate a clock based on a prescaler, a multiplier and a divider. The prescaler doubles the parent (xosc) frequency, then the multiplier/divider are applied. The multiplier has an integer and a fractional part. This commit also implements the CPRMAN CM_LOCK register. This register reports which PLL is currently locked. We consider a PLL has being locked as soon as it is enabled (on real hardware, there is a delay after turning a PLL on, for it to stabilize). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman_internals.h | 8 +++ hw/misc/bcm2835_cprman.c | 64 +++++++++++++++++++++- 2 files changed, 71 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLD_FRAC, 0x1240) REG32(A2W_PLLH_FRAC, 0x1260) REG32(A2W_PLLB_FRAC, 0x12e0) +/* misc registers */ +REG32(CM_LOCK, 0x114) + FIELD(CM_LOCK, FLOCKH, 12, 1) + FIELD(CM_LOCK, FLOCKD, 11, 1) + FIELD(CM_LOCK, FLOCKC, 10, 1) + FIELD(CM_LOCK, FLOCKB, 9, 1) + FIELD(CM_LOCK, FLOCKA, 8, 1) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ /* PLL */ +static bool pll_is_locked(const CprmanPllState *pll) +{ + return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN) + && !FIELD_EX32(*pll->reg_cm, CM_PLLx, ANARST); +} + static void pll_update(CprmanPllState *pll) { - clock_update(pll->out, 0); + uint64_t freq, ndiv, fdiv, pdiv; + + if (!pll_is_locked(pll)) { + clock_update(pll->out, 0); + return; + } + + pdiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PDIV); + + if (!pdiv) { + clock_update(pll->out, 0); + return; + } + + ndiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, NDIV); + fdiv = FIELD_EX32(*pll->reg_a2w_frac, A2W_PLLx_FRAC, FRAC); + + if (pll->reg_a2w_ana[1] & pll->prediv_mask) { + /* The prescaler doubles the parent frequency */ + ndiv *= 2; + fdiv *= 2; + } + + /* + * We have a multiplier with an integer part (ndiv) and a fractional part + * (fdiv), and a divider (pdiv). + */ + freq = clock_get_hz(pll->xosc_in) * + ((ndiv << R_A2W_PLLx_FRAC_FRAC_LENGTH) + fdiv); + freq /= pdiv; + freq >>= R_A2W_PLLx_FRAC_FRAC_LENGTH; + + clock_update_hz(pll->out, freq); } static void pll_xosc_update(void *opaque) @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* CPRMAN "top level" model */ +static uint32_t get_cm_lock(const BCM2835CprmanState *s) +{ + static const int CM_LOCK_MAPPING[CPRMAN_NUM_PLL] = { + [CPRMAN_PLLA] = R_CM_LOCK_FLOCKA_SHIFT, + [CPRMAN_PLLC] = R_CM_LOCK_FLOCKC_SHIFT, + [CPRMAN_PLLD] = R_CM_LOCK_FLOCKD_SHIFT, + [CPRMAN_PLLH] = R_CM_LOCK_FLOCKH_SHIFT, + [CPRMAN_PLLB] = R_CM_LOCK_FLOCKB_SHIFT, + }; + + uint32_t r = 0; + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + r |= pll_is_locked(&s->plls[i]) << CM_LOCK_MAPPING[i]; + } + + return r; +} + static uint64_t cprman_read(void *opaque, hwaddr offset, unsigned size) { @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, size_t idx = offset / sizeof(uint32_t); switch (idx) { + case R_CM_LOCK: + r = get_cm_lock(s); + break; + default: r = s->regs[idx]; } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> PLLs are composed of multiple channels. Each channel outputs one clock signal. They are modeled as one device taking the PLL generated clock as input, and outputting a new clock. A channel shares the CM register with its parent PLL, and has its own A2W_CTRL register. A write to the CM register will trigger an update of the PLL and all its channels, while a write to an A2W_CTRL channel register will update the required channel only. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 44 ++++++ include/hw/misc/bcm2835_cprman_internals.h | 146 +++++++++++++++++++ hw/misc/bcm2835_cprman.c | 155 +++++++++++++++++++-- 3 files changed, 337 insertions(+), 8 deletions(-) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef enum CprmanPll { CPRMAN_NUM_PLL } CprmanPll; +typedef enum CprmanPllChannel { + CPRMAN_PLLA_CHANNEL_DSI0 = 0, + CPRMAN_PLLA_CHANNEL_CORE, + CPRMAN_PLLA_CHANNEL_PER, + CPRMAN_PLLA_CHANNEL_CCP2, + + CPRMAN_PLLC_CHANNEL_CORE2, + CPRMAN_PLLC_CHANNEL_CORE1, + CPRMAN_PLLC_CHANNEL_PER, + CPRMAN_PLLC_CHANNEL_CORE0, + + CPRMAN_PLLD_CHANNEL_DSI0, + CPRMAN_PLLD_CHANNEL_CORE, + CPRMAN_PLLD_CHANNEL_PER, + CPRMAN_PLLD_CHANNEL_DSI1, + + CPRMAN_PLLH_CHANNEL_AUX, + CPRMAN_PLLH_CHANNEL_RCAL, + CPRMAN_PLLH_CHANNEL_PIX, + + CPRMAN_PLLB_CHANNEL_ARM, + + CPRMAN_NUM_PLL_CHANNEL, +} CprmanPllChannel; + typedef struct CprmanPllState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct CprmanPllState { Clock *out; } CprmanPllState; +typedef struct CprmanPllChannelState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanPllChannel id; + CprmanPll parent; + + uint32_t *reg_cm; + uint32_t hold_mask; + uint32_t load_mask; + uint32_t *reg_a2w_ctrl; + int fixed_divider; + + Clock *pll_in; + Clock *out; +} CprmanPllChannelState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { MemoryRegion iomem; CprmanPllState plls[CPRMAN_NUM_PLL]; + CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_cprman.h" #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" +#define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) +DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, + TYPE_CPRMAN_PLL_CHANNEL) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLD_FRAC, 0x1240) REG32(A2W_PLLH_FRAC, 0x1260) REG32(A2W_PLLB_FRAC, 0x12e0) +/* PLL channels */ +REG32(A2W_PLLA_DSI0, 0x1300) + FIELD(A2W_PLLx_CHANNELy, DIV, 0, 8) + FIELD(A2W_PLLx_CHANNELy, DISABLE, 8, 1) +REG32(A2W_PLLA_CORE, 0x1400) +REG32(A2W_PLLA_PER, 0x1500) +REG32(A2W_PLLA_CCP2, 0x1600) + +REG32(A2W_PLLC_CORE2, 0x1320) +REG32(A2W_PLLC_CORE1, 0x1420) +REG32(A2W_PLLC_PER, 0x1520) +REG32(A2W_PLLC_CORE0, 0x1620) + +REG32(A2W_PLLD_DSI0, 0x1340) +REG32(A2W_PLLD_CORE, 0x1440) +REG32(A2W_PLLD_PER, 0x1540) +REG32(A2W_PLLD_DSI1, 0x1640) + +REG32(A2W_PLLH_AUX, 0x1360) +REG32(A2W_PLLH_RCAL, 0x1460) +REG32(A2W_PLLH_PIX, 0x1560) +REG32(A2W_PLLH_STS, 0x1660) + +REG32(A2W_PLLB_ARM, 0x13e0) + /* misc registers */ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKH, 12, 1) @@ -XXX,XX +XXX,XX @@ static inline void set_pll_init_info(BCM2835CprmanState *s, pll->reg_a2w_frac = &s->regs[PLL_INIT_INFO[id].a2w_frac_offset]; } + +/* PLL channel init info */ +typedef struct PLLChannelInitInfo { + const char *name; + CprmanPll parent; + size_t cm_offset; + uint32_t cm_hold_mask; + uint32_t cm_load_mask; + size_t a2w_ctrl_offset; + unsigned int fixed_divider; +} PLLChannelInitInfo; + +#define FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_) \ + .parent = CPRMAN_ ## pll_, \ + .cm_offset = R_CM_ ## pll_, \ + .cm_load_mask = R_CM_ ## pll_ ## _ ## LOAD ## channel_ ## _MASK, \ + .a2w_ctrl_offset = R_A2W_ ## pll_ ## _ ## channel_ + +#define FILL_PLL_CHANNEL_INIT_INFO(pll_, channel_) \ + FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_), \ + .cm_hold_mask = R_CM_ ## pll_ ## _ ## HOLD ## channel_ ## _MASK, \ + .fixed_divider = 1 + +#define FILL_PLL_CHANNEL_INIT_INFO_nohold(pll_, channel_) \ + FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_), \ + .cm_hold_mask = 0 + +static PLLChannelInitInfo PLL_CHANNEL_INIT_INFO[] = { + [CPRMAN_PLLA_CHANNEL_DSI0] = { + .name = "plla-dsi0", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, DSI0), + }, + [CPRMAN_PLLA_CHANNEL_CORE] = { + .name = "plla-core", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, CORE), + }, + [CPRMAN_PLLA_CHANNEL_PER] = { + .name = "plla-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, PER), + }, + [CPRMAN_PLLA_CHANNEL_CCP2] = { + .name = "plla-ccp2", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, CCP2), + }, + + [CPRMAN_PLLC_CHANNEL_CORE2] = { + .name = "pllc-core2", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE2), + }, + [CPRMAN_PLLC_CHANNEL_CORE1] = { + .name = "pllc-core1", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE1), + }, + [CPRMAN_PLLC_CHANNEL_PER] = { + .name = "pllc-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, PER), + }, + [CPRMAN_PLLC_CHANNEL_CORE0] = { + .name = "pllc-core0", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE0), + }, + + [CPRMAN_PLLD_CHANNEL_DSI0] = { + .name = "plld-dsi0", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, DSI0), + }, + [CPRMAN_PLLD_CHANNEL_CORE] = { + .name = "plld-core", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, CORE), + }, + [CPRMAN_PLLD_CHANNEL_PER] = { + .name = "plld-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, PER), + }, + [CPRMAN_PLLD_CHANNEL_DSI1] = { + .name = "plld-dsi1", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, DSI1), + }, + + [CPRMAN_PLLH_CHANNEL_AUX] = { + .name = "pllh-aux", + .fixed_divider = 1, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, AUX), + }, + [CPRMAN_PLLH_CHANNEL_RCAL] = { + .name = "pllh-rcal", + .fixed_divider = 10, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, RCAL), + }, + [CPRMAN_PLLH_CHANNEL_PIX] = { + .name = "pllh-pix", + .fixed_divider = 10, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, PIX), + }, + + [CPRMAN_PLLB_CHANNEL_ARM] = { + .name = "pllb-arm", + FILL_PLL_CHANNEL_INIT_INFO(PLLB, ARM), + }, +}; + +#undef FILL_PLL_CHANNEL_INIT_INFO_nohold +#undef FILL_PLL_CHANNEL_INIT_INFO +#undef FILL_PLL_CHANNEL_INIT_INFO_common + +static inline void set_pll_channel_init_info(BCM2835CprmanState *s, + CprmanPllChannelState *channel, + CprmanPllChannel id) +{ + channel->id = id; + channel->parent = PLL_CHANNEL_INIT_INFO[id].parent; + channel->reg_cm = &s->regs[PLL_CHANNEL_INIT_INFO[id].cm_offset]; + channel->hold_mask = PLL_CHANNEL_INIT_INFO[id].cm_hold_mask; + channel->load_mask = PLL_CHANNEL_INIT_INFO[id].cm_load_mask; + channel->reg_a2w_ctrl = &s->regs[PLL_CHANNEL_INIT_INFO[id].a2w_ctrl_offset]; + channel->fixed_divider = PLL_CHANNEL_INIT_INFO[id].fixed_divider; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { }; +/* PLL channel */ + +static void pll_channel_update(CprmanPllChannelState *channel) +{ + clock_update(channel->out, 0); +} + +/* Update a PLL and all its channels */ +static void pll_update_all_channels(BCM2835CprmanState *s, + CprmanPllState *pll) +{ + size_t i; + + pll_update(pll); + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + CprmanPllChannelState *channel = &s->channels[i]; + if (channel->parent == pll->id) { + pll_channel_update(channel); + } + } +} + +static void pll_channel_pll_in_update(void *opaque) +{ + pll_channel_update(CPRMAN_PLL_CHANNEL(opaque)); +} + +static void pll_channel_init(Object *obj) +{ + CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(obj); + + s->pll_in = qdev_init_clock_in(DEVICE(s), "pll-in", + pll_channel_pll_in_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription pll_channel_vmstate = { + .name = TYPE_CPRMAN_PLL_CHANNEL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(pll_in, CprmanPllChannelState), + VMSTATE_END_OF_LIST() + } +}; + +static void pll_channel_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &pll_channel_vmstate; +} + +static const TypeInfo cprman_pll_channel_info = { + .name = TYPE_CPRMAN_PLL_CHANNEL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanPllChannelState), + .class_init = pll_channel_class_init, + .instance_init = pll_channel_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, return r; } -#define CASE_PLL_REGS(pll_) \ - case R_CM_ ## pll_: \ +static inline void update_pll_and_channels_from_cm(BCM2835CprmanState *s, + size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + if (PLL_INIT_INFO[i].cm_offset == idx) { + pll_update_all_channels(s, &s->plls[i]); + return; + } + } +} + +static inline void update_channel_from_a2w(BCM2835CprmanState *s, size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + if (PLL_CHANNEL_INIT_INFO[i].a2w_ctrl_offset == idx) { + pll_channel_update(&s->channels[i]); + return; + } + } +} + +#define CASE_PLL_A2W_REGS(pll_) \ case R_A2W_ ## pll_ ## _CTRL: \ case R_A2W_ ## pll_ ## _ANA0: \ case R_A2W_ ## pll_ ## _ANA1: \ @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, s->regs[idx] = value; switch (idx) { - CASE_PLL_REGS(PLLA) : + case R_CM_PLLA ... R_CM_PLLH: + case R_CM_PLLB: + /* + * A given CM_PLLx register is shared by both the PLL and the channels + * of this PLL. + */ + update_pll_and_channels_from_cm(s, idx); + break; + + CASE_PLL_A2W_REGS(PLLA) : pll_update(&s->plls[CPRMAN_PLLA]); break; - CASE_PLL_REGS(PLLC) : + CASE_PLL_A2W_REGS(PLLC) : pll_update(&s->plls[CPRMAN_PLLC]); break; - CASE_PLL_REGS(PLLD) : + CASE_PLL_A2W_REGS(PLLD) : pll_update(&s->plls[CPRMAN_PLLD]); break; - CASE_PLL_REGS(PLLH) : + CASE_PLL_A2W_REGS(PLLH) : pll_update(&s->plls[CPRMAN_PLLH]); break; - CASE_PLL_REGS(PLLB) : + CASE_PLL_A2W_REGS(PLLB) : pll_update(&s->plls[CPRMAN_PLLB]); break; + + case R_A2W_PLLA_DSI0: + case R_A2W_PLLA_CORE: + case R_A2W_PLLA_PER: + case R_A2W_PLLA_CCP2: + case R_A2W_PLLC_CORE2: + case R_A2W_PLLC_CORE1: + case R_A2W_PLLC_PER: + case R_A2W_PLLC_CORE0: + case R_A2W_PLLD_DSI0: + case R_A2W_PLLD_CORE: + case R_A2W_PLLD_PER: + case R_A2W_PLLD_DSI1: + case R_A2W_PLLH_AUX: + case R_A2W_PLLH_RCAL: + case R_A2W_PLLH_PIX: + case R_A2W_PLLB_ARM: + update_channel_from_a2w(s, idx); + break; } } -#undef CASE_PLL_REGS +#undef CASE_PLL_A2W_REGS static const MemoryRegionOps cprman_ops = { .read = cprman_read, @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->plls[i])); } + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + device_cold_reset(DEVICE(&s->channels[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_init_info(s, &s->plls[i], i); } + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + object_initialize_child(obj, PLL_CHANNEL_INIT_INFO[i].name, + &s->channels[i], + TYPE_CPRMAN_PLL_CHANNEL); + set_pll_channel_init_info(s, &s->channels[i], i); + } + s->xosc = clock_new(obj, "xosc"); memory_region_init_io(&s->iomem, obj, &cprman_ops, @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) return; } } + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + CprmanPllChannelState *channel = &s->channels[i]; + CprmanPll parent = PLL_CHANNEL_INIT_INFO[i].parent; + Clock *parent_clk = s->plls[parent].out; + + clock_set_source(channel->pll_in, parent_clk); + + if (!qdev_realize(DEVICE(channel), NULL, errp)) { + return; + } + } } static const VMStateDescription cprman_vmstate = { @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) { type_register_static(&cprman_info); type_register_static(&cprman_pll_info); + type_register_static(&cprman_pll_channel_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> A PLL channel is able to further divide the generated PLL frequency. The divider is given in the CTRL_A2W register. Some channels have an additional fixed divider which is always applied to the signal. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/bcm2835_cprman.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* PLL channel */ +static bool pll_channel_is_enabled(CprmanPllChannelState *channel) +{ + /* + * XXX I'm not sure of the purpose of the LOAD field. The Linux driver does + * not set it when enabling the channel, but does clear it when disabling + * it. + */ + return !FIELD_EX32(*channel->reg_a2w_ctrl, A2W_PLLx_CHANNELy, DISABLE) + && !(*channel->reg_cm & channel->hold_mask); +} + static void pll_channel_update(CprmanPllChannelState *channel) { - clock_update(channel->out, 0); + uint64_t freq, div; + + if (!pll_channel_is_enabled(channel)) { + clock_update(channel->out, 0); + return; + } + + div = FIELD_EX32(*channel->reg_a2w_ctrl, A2W_PLLx_CHANNELy, DIV); + + if (!div) { + /* + * It seems that when the divider value is 0, it is considered as + * being maximum by the hardware (see the Linux driver). + */ + div = R_A2W_PLLx_CHANNELy_DIV_MASK; + } + + /* Some channels have an additional fixed divider */ + freq = clock_get_hz(channel->pll_in) / (div * channel->fixed_divider); + + clock_update_hz(channel->out, freq); } /* Update a PLL and all its channels */ -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The clock multiplexers are the last clock stage in the CPRMAN. Each mux outputs one clock signal that goes out of the CPRMAN to the SoC peripherals. Each mux has at most 10 sources. The sources 0 to 3 are common to all muxes. They are: 0. ground (no clock signal) 1. the main oscillator (xosc) 2. "test debug 0" clock 3. "test debug 1" clock Test debug 0 and 1 are actual clock muxes that can be used as sources to other muxes (for debug purpose). Sources 4 to 9 are mux specific and can be unpopulated (grounded). Those sources are fed by the PLL channels outputs. One corner case exists for DSI0E and DSI0P muxes. They have their source number 4 connected to an intermediate multiplexer that can select between PLLA-DSI0 and PLLD-DSI0 channel. This multiplexer is called DSI0HSCK and is not a clock mux as such. It is really a simple mux from the hardware point of view (see https://elinux.org/The_Undocumented_Pi). This mux is not implemented in this commit. Note that there is some muxes for which sources are unknown (because of a lack of documentation). For those cases all the sources are connected to ground in this implementation. Each clock mux output is exported by the CPRMAN at the qdev level, adding the suffix '-out' to the mux name to form the output clock name. (E.g. the 'uart' mux sees its output exported as 'uart-out' at the CPRMAN level.) Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 85 +++++ include/hw/misc/bcm2835_cprman_internals.h | 422 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 151 ++++++++ 3 files changed, 658 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef enum CprmanPllChannel { CPRMAN_PLLB_CHANNEL_ARM, CPRMAN_NUM_PLL_CHANNEL, + + /* Special values used when connecting clock sources to clocks */ + CPRMAN_CLOCK_SRC_NORMAL = -1, + CPRMAN_CLOCK_SRC_FORCE_GROUND = -2, + CPRMAN_CLOCK_SRC_DSI0HSCK = -3, } CprmanPllChannel; +typedef enum CprmanClockMux { + CPRMAN_CLOCK_GNRIC, + CPRMAN_CLOCK_VPU, + CPRMAN_CLOCK_SYS, + CPRMAN_CLOCK_PERIA, + CPRMAN_CLOCK_PERII, + CPRMAN_CLOCK_H264, + CPRMAN_CLOCK_ISP, + CPRMAN_CLOCK_V3D, + CPRMAN_CLOCK_CAM0, + CPRMAN_CLOCK_CAM1, + CPRMAN_CLOCK_CCP2, + CPRMAN_CLOCK_DSI0E, + CPRMAN_CLOCK_DSI0P, + CPRMAN_CLOCK_DPI, + CPRMAN_CLOCK_GP0, + CPRMAN_CLOCK_GP1, + CPRMAN_CLOCK_GP2, + CPRMAN_CLOCK_HSM, + CPRMAN_CLOCK_OTP, + CPRMAN_CLOCK_PCM, + CPRMAN_CLOCK_PWM, + CPRMAN_CLOCK_SLIM, + CPRMAN_CLOCK_SMI, + CPRMAN_CLOCK_TEC, + CPRMAN_CLOCK_TD0, + CPRMAN_CLOCK_TD1, + CPRMAN_CLOCK_TSENS, + CPRMAN_CLOCK_TIMER, + CPRMAN_CLOCK_UART, + CPRMAN_CLOCK_VEC, + CPRMAN_CLOCK_PULSE, + CPRMAN_CLOCK_SDC, + CPRMAN_CLOCK_ARM, + CPRMAN_CLOCK_AVEO, + CPRMAN_CLOCK_EMMC, + CPRMAN_CLOCK_EMMC2, + + CPRMAN_NUM_CLOCK_MUX +} CprmanClockMux; + +typedef enum CprmanClockMuxSource { + CPRMAN_CLOCK_SRC_GND = 0, + CPRMAN_CLOCK_SRC_XOSC, + CPRMAN_CLOCK_SRC_TD0, + CPRMAN_CLOCK_SRC_TD1, + CPRMAN_CLOCK_SRC_PLLA, + CPRMAN_CLOCK_SRC_PLLC, + CPRMAN_CLOCK_SRC_PLLD, + CPRMAN_CLOCK_SRC_PLLH, + CPRMAN_CLOCK_SRC_PLLC_CORE1, + CPRMAN_CLOCK_SRC_PLLC_CORE2, + + CPRMAN_NUM_CLOCK_MUX_SRC +} CprmanClockMuxSource; + typedef struct CprmanPllState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct CprmanPllChannelState { Clock *out; } CprmanPllChannelState; +typedef struct CprmanClockMuxState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanClockMux id; + + uint32_t *reg_ctl; + uint32_t *reg_div; + int int_bits; + int frac_bits; + + Clock *srcs[CPRMAN_NUM_CLOCK_MUX_SRC]; + Clock *out; + + /* + * Used by clock srcs update callback to retrieve both the clock and the + * source number. + */ + struct CprmanClockMuxState *backref[CPRMAN_NUM_CLOCK_MUX_SRC]; +} CprmanClockMuxState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { CprmanPllState plls[CPRMAN_NUM_PLL]; CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; + CprmanClockMuxState clock_muxes[CPRMAN_NUM_CLOCK_MUX]; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; Clock *xosc; + Clock *gnd; }; #endif diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" #define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" +#define TYPE_CPRMAN_CLOCK_MUX "bcm2835-cprman-clock-mux" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, TYPE_CPRMAN_PLL_CHANNEL) +DECLARE_INSTANCE_CHECKER(CprmanClockMuxState, CPRMAN_CLOCK_MUX, + TYPE_CPRMAN_CLOCK_MUX) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLH_STS, 0x1660) REG32(A2W_PLLB_ARM, 0x13e0) +/* Clock muxes */ +REG32(CM_GNRICCTL, 0x000) + FIELD(CM_CLOCKx_CTL, SRC, 0, 4) + FIELD(CM_CLOCKx_CTL, ENABLE, 4, 1) + FIELD(CM_CLOCKx_CTL, KILL, 5, 1) + FIELD(CM_CLOCKx_CTL, GATE, 6, 1) + FIELD(CM_CLOCKx_CTL, BUSY, 7, 1) + FIELD(CM_CLOCKx_CTL, BUSYD, 8, 1) + FIELD(CM_CLOCKx_CTL, MASH, 9, 2) + FIELD(CM_CLOCKx_CTL, FLIP, 11, 1) +REG32(CM_GNRICDIV, 0x004) + FIELD(CM_CLOCKx_DIV, FRAC, 0, 12) +REG32(CM_VPUCTL, 0x008) +REG32(CM_VPUDIV, 0x00c) +REG32(CM_SYSCTL, 0x010) +REG32(CM_SYSDIV, 0x014) +REG32(CM_PERIACTL, 0x018) +REG32(CM_PERIADIV, 0x01c) +REG32(CM_PERIICTL, 0x020) +REG32(CM_PERIIDIV, 0x024) +REG32(CM_H264CTL, 0x028) +REG32(CM_H264DIV, 0x02c) +REG32(CM_ISPCTL, 0x030) +REG32(CM_ISPDIV, 0x034) +REG32(CM_V3DCTL, 0x038) +REG32(CM_V3DDIV, 0x03c) +REG32(CM_CAM0CTL, 0x040) +REG32(CM_CAM0DIV, 0x044) +REG32(CM_CAM1CTL, 0x048) +REG32(CM_CAM1DIV, 0x04c) +REG32(CM_CCP2CTL, 0x050) +REG32(CM_CCP2DIV, 0x054) +REG32(CM_DSI0ECTL, 0x058) +REG32(CM_DSI0EDIV, 0x05c) +REG32(CM_DSI0PCTL, 0x060) +REG32(CM_DSI0PDIV, 0x064) +REG32(CM_DPICTL, 0x068) +REG32(CM_DPIDIV, 0x06c) +REG32(CM_GP0CTL, 0x070) +REG32(CM_GP0DIV, 0x074) +REG32(CM_GP1CTL, 0x078) +REG32(CM_GP1DIV, 0x07c) +REG32(CM_GP2CTL, 0x080) +REG32(CM_GP2DIV, 0x084) +REG32(CM_HSMCTL, 0x088) +REG32(CM_HSMDIV, 0x08c) +REG32(CM_OTPCTL, 0x090) +REG32(CM_OTPDIV, 0x094) +REG32(CM_PCMCTL, 0x098) +REG32(CM_PCMDIV, 0x09c) +REG32(CM_PWMCTL, 0x0a0) +REG32(CM_PWMDIV, 0x0a4) +REG32(CM_SLIMCTL, 0x0a8) +REG32(CM_SLIMDIV, 0x0ac) +REG32(CM_SMICTL, 0x0b0) +REG32(CM_SMIDIV, 0x0b4) +REG32(CM_TCNTCTL, 0x0c0) +REG32(CM_TCNTCNT, 0x0c4) +REG32(CM_TECCTL, 0x0c8) +REG32(CM_TECDIV, 0x0cc) +REG32(CM_TD0CTL, 0x0d0) +REG32(CM_TD0DIV, 0x0d4) +REG32(CM_TD1CTL, 0x0d8) +REG32(CM_TD1DIV, 0x0dc) +REG32(CM_TSENSCTL, 0x0e0) +REG32(CM_TSENSDIV, 0x0e4) +REG32(CM_TIMERCTL, 0x0e8) +REG32(CM_TIMERDIV, 0x0ec) +REG32(CM_UARTCTL, 0x0f0) +REG32(CM_UARTDIV, 0x0f4) +REG32(CM_VECCTL, 0x0f8) +REG32(CM_VECDIV, 0x0fc) +REG32(CM_PULSECTL, 0x190) +REG32(CM_PULSEDIV, 0x194) +REG32(CM_SDCCTL, 0x1a8) +REG32(CM_SDCDIV, 0x1ac) +REG32(CM_ARMCTL, 0x1b0) +REG32(CM_AVEOCTL, 0x1b8) +REG32(CM_AVEODIV, 0x1bc) +REG32(CM_EMMCCTL, 0x1c0) +REG32(CM_EMMCDIV, 0x1c4) +REG32(CM_EMMC2CTL, 0x1d0) +REG32(CM_EMMC2DIV, 0x1d4) + /* misc registers */ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKH, 12, 1) @@ -XXX,XX +XXX,XX @@ static inline void set_pll_channel_init_info(BCM2835CprmanState *s, channel->fixed_divider = PLL_CHANNEL_INIT_INFO[id].fixed_divider; } +/* Clock mux init info */ +typedef struct ClockMuxInitInfo { + const char *name; + size_t cm_offset; /* cm_offset[0]->CM_CTL, cm_offset[1]->CM_DIV */ + int int_bits; + int frac_bits; + + CprmanPllChannel src_mapping[CPRMAN_NUM_CLOCK_MUX_SRC]; +} ClockMuxInitInfo; + +/* + * Each clock mux can have up to 10 sources. Sources 0 to 3 are always the + * same (ground, xosc, td0, td1). Sources 4 to 9 are mux specific, and are not + * always populated. The following macros catch all those cases. + */ + +/* Unknown mapping. Connect everything to ground */ +#define SRC_MAPPING_INFO_unknown \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* gnd */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* xosc */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* test debug 0 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* test debug 1 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll a */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll d */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll h */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c, core1 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c, core2 */ \ + } + +/* Only the oscillator and the two test debug clocks */ +#define SRC_MAPPING_INFO_xosc \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* All the PLL "core" channels */ +#define SRC_MAPPING_INFO_core \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLA_CHANNEL_CORE, \ + CPRMAN_PLLC_CHANNEL_CORE0, \ + CPRMAN_PLLD_CHANNEL_CORE, \ + CPRMAN_PLLH_CHANNEL_AUX, \ + CPRMAN_PLLC_CHANNEL_CORE1, \ + CPRMAN_PLLC_CHANNEL_CORE2, \ + } + +/* All the PLL "per" channels */ +#define SRC_MAPPING_INFO_periph \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLA_CHANNEL_PER, \ + CPRMAN_PLLC_CHANNEL_PER, \ + CPRMAN_PLLD_CHANNEL_PER, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* + * The DSI0 channels. This one got an intermediate mux between the PLL channels + * and the clock input. + */ +#define SRC_MAPPING_INFO_dsi0 \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_DSI0HSCK, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* The DSI1 channel */ +#define SRC_MAPPING_INFO_dsi1 \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLD_CHANNEL_DSI1, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +#define FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO(kind_) \ + SRC_MAPPING_INFO_ ## kind_ + +#define FILL_CLOCK_MUX_INIT_INFO(clock_, kind_) \ + .cm_offset = R_CM_ ## clock_ ## CTL, \ + FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO(kind_) + +static ClockMuxInitInfo CLOCK_MUX_INIT_INFO[] = { + [CPRMAN_CLOCK_GNRIC] = { + .name = "gnric", + FILL_CLOCK_MUX_INIT_INFO(GNRIC, unknown), + }, + [CPRMAN_CLOCK_VPU] = { + .name = "vpu", + .int_bits = 12, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(VPU, core), + }, + [CPRMAN_CLOCK_SYS] = { + .name = "sys", + FILL_CLOCK_MUX_INIT_INFO(SYS, unknown), + }, + [CPRMAN_CLOCK_PERIA] = { + .name = "peria", + FILL_CLOCK_MUX_INIT_INFO(PERIA, unknown), + }, + [CPRMAN_CLOCK_PERII] = { + .name = "perii", + FILL_CLOCK_MUX_INIT_INFO(PERII, unknown), + }, + [CPRMAN_CLOCK_H264] = { + .name = "h264", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(H264, core), + }, + [CPRMAN_CLOCK_ISP] = { + .name = "isp", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(ISP, core), + }, + [CPRMAN_CLOCK_V3D] = { + .name = "v3d", + FILL_CLOCK_MUX_INIT_INFO(V3D, core), + }, + [CPRMAN_CLOCK_CAM0] = { + .name = "cam0", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(CAM0, periph), + }, + [CPRMAN_CLOCK_CAM1] = { + .name = "cam1", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(CAM1, periph), + }, + [CPRMAN_CLOCK_CCP2] = { + .name = "ccp2", + FILL_CLOCK_MUX_INIT_INFO(CCP2, unknown), + }, + [CPRMAN_CLOCK_DSI0E] = { + .name = "dsi0e", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(DSI0E, dsi0), + }, + [CPRMAN_CLOCK_DSI0P] = { + .name = "dsi0p", + .int_bits = 0, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(DSI0P, dsi0), + }, + [CPRMAN_CLOCK_DPI] = { + .name = "dpi", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(DPI, periph), + }, + [CPRMAN_CLOCK_GP0] = { + .name = "gp0", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP0, periph), + }, + [CPRMAN_CLOCK_GP1] = { + .name = "gp1", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP1, periph), + }, + [CPRMAN_CLOCK_GP2] = { + .name = "gp2", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP2, periph), + }, + [CPRMAN_CLOCK_HSM] = { + .name = "hsm", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(HSM, periph), + }, + [CPRMAN_CLOCK_OTP] = { + .name = "otp", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(OTP, xosc), + }, + [CPRMAN_CLOCK_PCM] = { + .name = "pcm", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(PCM, periph), + }, + [CPRMAN_CLOCK_PWM] = { + .name = "pwm", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(PWM, periph), + }, + [CPRMAN_CLOCK_SLIM] = { + .name = "slim", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(SLIM, periph), + }, + [CPRMAN_CLOCK_SMI] = { + .name = "smi", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(SMI, periph), + }, + [CPRMAN_CLOCK_TEC] = { + .name = "tec", + .int_bits = 6, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(TEC, xosc), + }, + [CPRMAN_CLOCK_TD0] = { + .name = "td0", + FILL_CLOCK_MUX_INIT_INFO(TD0, unknown), + }, + [CPRMAN_CLOCK_TD1] = { + .name = "td1", + FILL_CLOCK_MUX_INIT_INFO(TD1, unknown), + }, + [CPRMAN_CLOCK_TSENS] = { + .name = "tsens", + .int_bits = 5, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(TSENS, xosc), + }, + [CPRMAN_CLOCK_TIMER] = { + .name = "timer", + .int_bits = 6, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(TIMER, xosc), + }, + [CPRMAN_CLOCK_UART] = { + .name = "uart", + .int_bits = 10, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(UART, periph), + }, + [CPRMAN_CLOCK_VEC] = { + .name = "vec", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(VEC, periph), + }, + [CPRMAN_CLOCK_PULSE] = { + .name = "pulse", + FILL_CLOCK_MUX_INIT_INFO(PULSE, xosc), + }, + [CPRMAN_CLOCK_SDC] = { + .name = "sdram", + .int_bits = 6, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(SDC, core), + }, + [CPRMAN_CLOCK_ARM] = { + .name = "arm", + FILL_CLOCK_MUX_INIT_INFO(ARM, unknown), + }, + [CPRMAN_CLOCK_AVEO] = { + .name = "aveo", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(AVEO, periph), + }, + [CPRMAN_CLOCK_EMMC] = { + .name = "emmc", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(EMMC, periph), + }, + [CPRMAN_CLOCK_EMMC2] = { + .name = "emmc2", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(EMMC2, unknown), + }, +}; + +#undef FILL_CLOCK_MUX_INIT_INFO +#undef FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO +#undef SRC_MAPPING_INFO_dsi1 +#undef SRC_MAPPING_INFO_dsi0 +#undef SRC_MAPPING_INFO_periph +#undef SRC_MAPPING_INFO_core +#undef SRC_MAPPING_INFO_xosc +#undef SRC_MAPPING_INFO_unknown + +static inline void set_clock_mux_init_info(BCM2835CprmanState *s, + CprmanClockMuxState *mux, + CprmanClockMux id) +{ + mux->id = id; + mux->reg_ctl = &s->regs[CLOCK_MUX_INIT_INFO[id].cm_offset]; + mux->reg_div = &s->regs[CLOCK_MUX_INIT_INFO[id].cm_offset + 1]; + mux->int_bits = CLOCK_MUX_INIT_INFO[id].int_bits; + mux->frac_bits = CLOCK_MUX_INIT_INFO[id].frac_bits; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ * * The page at https://elinux.org/The_Undocumented_Pi gives the actual clock * tree configuration. + * + * The CPRMAN exposes clock outputs with the name of the clock mux suffixed + * with "-out" (e.g. "uart-out", "h264-out", ...). */ #include "qemu/osdep.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_channel_info = { }; +/* clock mux */ + +static void clock_mux_update(CprmanClockMuxState *mux) +{ + clock_update(mux->out, 0); +} + +static void clock_mux_src_update(void *opaque) +{ + CprmanClockMuxState **backref = opaque; + CprmanClockMuxState *s = *backref; + + clock_mux_update(s); +} + +static void clock_mux_init(Object *obj) +{ + CprmanClockMuxState *s = CPRMAN_CLOCK_MUX(obj); + size_t i; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX_SRC; i++) { + char *name = g_strdup_printf("srcs[%zu]", i); + s->backref[i] = s; + s->srcs[i] = qdev_init_clock_in(DEVICE(s), name, + clock_mux_src_update, + &s->backref[i]); + g_free(name); + } + + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription clock_mux_vmstate = { + .name = TYPE_CPRMAN_CLOCK_MUX, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_ARRAY_CLOCK(srcs, CprmanClockMuxState, + CPRMAN_NUM_CLOCK_MUX_SRC), + VMSTATE_END_OF_LIST() + } +}; + +static void clock_mux_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &clock_mux_vmstate; +} + +static const TypeInfo cprman_clock_mux_info = { + .name = TYPE_CPRMAN_CLOCK_MUX, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanClockMuxState), + .class_init = clock_mux_class_init, + .instance_init = clock_mux_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static inline void update_channel_from_a2w(BCM2835CprmanState *s, size_t idx) } } +static inline void update_mux_from_cm(BCM2835CprmanState *s, size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + if ((CLOCK_MUX_INIT_INFO[i].cm_offset == idx) || + (CLOCK_MUX_INIT_INFO[i].cm_offset + 4 == idx)) { + /* matches CM_CTL or CM_DIV mux register */ + clock_mux_update(&s->clock_muxes[i]); + return; + } + } +} + #define CASE_PLL_A2W_REGS(pll_) \ case R_A2W_ ## pll_ ## _CTRL: \ case R_A2W_ ## pll_ ## _ANA0: \ @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, case R_A2W_PLLB_ARM: update_channel_from_a2w(s, idx); break; + + case R_CM_GNRICCTL ... R_CM_SMIDIV: + case R_CM_TCNTCNT ... R_CM_VECDIV: + case R_CM_PULSECTL ... R_CM_PULSEDIV: + case R_CM_SDCCTL ... R_CM_ARMCTL: + case R_CM_AVEOCTL ... R_CM_EMMCDIV: + case R_CM_EMMC2CTL ... R_CM_EMMC2DIV: + update_mux_from_cm(s, idx); + break; } } @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->channels[i])); } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + device_cold_reset(DEVICE(&s->clock_muxes[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_channel_init_info(s, &s->channels[i], i); } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + char *alias; + + object_initialize_child(obj, CLOCK_MUX_INIT_INFO[i].name, + &s->clock_muxes[i], + TYPE_CPRMAN_CLOCK_MUX); + set_clock_mux_init_info(s, &s->clock_muxes[i], i); + + /* Expose muxes output as CPRMAN outputs */ + alias = g_strdup_printf("%s-out", CLOCK_MUX_INIT_INFO[i].name); + qdev_alias_clock(DEVICE(&s->clock_muxes[i]), "out", DEVICE(obj), alias); + g_free(alias); + } + s->xosc = clock_new(obj, "xosc"); + s->gnd = clock_new(obj, "gnd"); + + clock_set(s->gnd, 0); memory_region_init_io(&s->iomem, obj, &cprman_ops, s, "bcm2835-cprman", 0x2000); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void connect_mux_sources(BCM2835CprmanState *s, + CprmanClockMuxState *mux, + const CprmanPllChannel *clk_mapping) +{ + size_t i; + Clock *td0 = s->clock_muxes[CPRMAN_CLOCK_TD0].out; + Clock *td1 = s->clock_muxes[CPRMAN_CLOCK_TD1].out; + + /* For sources from 0 to 3. Source 4 to 9 are mux specific */ + Clock * const CLK_SRC_MAPPING[] = { + [CPRMAN_CLOCK_SRC_GND] = s->gnd, + [CPRMAN_CLOCK_SRC_XOSC] = s->xosc, + [CPRMAN_CLOCK_SRC_TD0] = td0, + [CPRMAN_CLOCK_SRC_TD1] = td1, + }; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX_SRC; i++) { + CprmanPllChannel mapping = clk_mapping[i]; + Clock *src; + + if (mapping == CPRMAN_CLOCK_SRC_FORCE_GROUND) { + src = s->gnd; + } else if (mapping == CPRMAN_CLOCK_SRC_DSI0HSCK) { + src = s->gnd; /* TODO */ + } else if (i < CPRMAN_CLOCK_SRC_PLLA) { + src = CLK_SRC_MAPPING[i]; + } else { + src = s->channels[mapping].out; + } + + clock_set_source(mux->srcs[i], src); + } +} + static void cprman_realize(DeviceState *dev, Error **errp) { BCM2835CprmanState *s = CPRMAN(dev); @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) return; } } + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + CprmanClockMuxState *clock_mux = &s->clock_muxes[i]; + + connect_mux_sources(s, clock_mux, CLOCK_MUX_INIT_INFO[i].src_mapping); + + if (!qdev_realize(DEVICE(clock_mux), NULL, errp)) { + return; + } + } } static const VMStateDescription cprman_vmstate = { @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) type_register_static(&cprman_info); type_register_static(&cprman_pll_info); type_register_static(&cprman_pll_channel_info); + type_register_static(&cprman_clock_mux_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> A clock mux can be configured to select one of its 10 sources through the CM_CTL register. It also embeds yet another clock divider, composed of an integer part and a fractional part. The number of bits of each part is mux dependent. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/bcm2835_cprman.c | 53 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-) diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_channel_info = { /* clock mux */ +static bool clock_mux_is_enabled(CprmanClockMuxState *mux) +{ + return FIELD_EX32(*mux->reg_ctl, CM_CLOCKx_CTL, ENABLE); +} + static void clock_mux_update(CprmanClockMuxState *mux) { - clock_update(mux->out, 0); + uint64_t freq; + uint32_t div, src = FIELD_EX32(*mux->reg_ctl, CM_CLOCKx_CTL, SRC); + bool enabled = clock_mux_is_enabled(mux); + + *mux->reg_ctl = FIELD_DP32(*mux->reg_ctl, CM_CLOCKx_CTL, BUSY, enabled); + + if (!enabled) { + clock_update(mux->out, 0); + return; + } + + freq = clock_get_hz(mux->srcs[src]); + + if (mux->int_bits == 0 && mux->frac_bits == 0) { + clock_update_hz(mux->out, freq); + return; + } + + /* + * The divider has an integer and a fractional part. The size of each part + * varies with the muxes (int_bits and frac_bits). Both parts are + * concatenated, with the integer part always starting at bit 12. + * + * 31 12 11 0 + * ------------------------------ + * CM_DIV | | int | frac | | + * ------------------------------ + * <-----> <------> + * int_bits frac_bits + */ + div = extract32(*mux->reg_div, + R_CM_CLOCKx_DIV_FRAC_LENGTH - mux->frac_bits, + mux->int_bits + mux->frac_bits); + + if (!div) { + clock_update(mux->out, 0); + return; + } + + freq = muldiv64(freq, 1 << mux->frac_bits, div); + + clock_update_hz(mux->out, freq); } static void clock_mux_src_update(void *opaque) { CprmanClockMuxState **backref = opaque; CprmanClockMuxState *s = *backref; + CprmanClockMuxSource src = backref - s->backref; + + if (FIELD_EX32(*s->reg_ctl, CM_CLOCKx_CTL, SRC) != src) { + return; + } clock_mux_update(s); } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> This simple mux sits between the PLL channels and the DSI0E and DSI0P clock muxes. This mux selects between PLLA-DSI0 and PLLD-DSI0 channel and outputs the selected signal to source number 4 of DSI0E/P clock muxes. It is controlled by the cm_dsi0hsck register. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 15 +++++ include/hw/misc/bcm2835_cprman_internals.h | 6 ++ hw/misc/bcm2835_cprman.c | 74 +++++++++++++++++++++- 3 files changed, 94 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef struct CprmanClockMuxState { struct CprmanClockMuxState *backref[CPRMAN_NUM_CLOCK_MUX_SRC]; } CprmanClockMuxState; +typedef struct CprmanDsi0HsckMuxState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanClockMux id; + + uint32_t *reg_cm; + + Clock *plla_in; + Clock *plld_in; + Clock *out; +} CprmanDsi0HsckMuxState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { CprmanPllState plls[CPRMAN_NUM_PLL]; CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; CprmanClockMuxState clock_muxes[CPRMAN_NUM_CLOCK_MUX]; + CprmanDsi0HsckMuxState dsi0hsck_mux; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" #define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" #define TYPE_CPRMAN_CLOCK_MUX "bcm2835-cprman-clock-mux" +#define TYPE_CPRMAN_DSI0HSCK_MUX "bcm2835-cprman-dsi0hsck-mux" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, TYPE_CPRMAN_PLL_CHANNEL) DECLARE_INSTANCE_CHECKER(CprmanClockMuxState, CPRMAN_CLOCK_MUX, TYPE_CPRMAN_CLOCK_MUX) +DECLARE_INSTANCE_CHECKER(CprmanDsi0HsckMuxState, CPRMAN_DSI0HSCK_MUX, + TYPE_CPRMAN_DSI0HSCK_MUX) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKB, 9, 1) FIELD(CM_LOCK, FLOCKA, 8, 1) +REG32(CM_DSI0HSCK, 0x120) + FIELD(CM_DSI0HSCK, SELPLLD, 0, 1) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_clock_mux_info = { }; +/* DSI0HSCK mux */ + +static void dsi0hsck_mux_update(CprmanDsi0HsckMuxState *s) +{ + bool src_is_plld = FIELD_EX32(*s->reg_cm, CM_DSI0HSCK, SELPLLD); + Clock *src = src_is_plld ? s->plld_in : s->plla_in; + + clock_update(s->out, clock_get(src)); +} + +static void dsi0hsck_mux_in_update(void *opaque) +{ + dsi0hsck_mux_update(CPRMAN_DSI0HSCK_MUX(opaque)); +} + +static void dsi0hsck_mux_init(Object *obj) +{ + CprmanDsi0HsckMuxState *s = CPRMAN_DSI0HSCK_MUX(obj); + DeviceState *dev = DEVICE(obj); + + s->plla_in = qdev_init_clock_in(dev, "plla-in", dsi0hsck_mux_in_update, s); + s->plld_in = qdev_init_clock_in(dev, "plld-in", dsi0hsck_mux_in_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription dsi0hsck_mux_vmstate = { + .name = TYPE_CPRMAN_DSI0HSCK_MUX, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(plla_in, CprmanDsi0HsckMuxState), + VMSTATE_CLOCK(plld_in, CprmanDsi0HsckMuxState), + VMSTATE_END_OF_LIST() + } +}; + +static void dsi0hsck_mux_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &dsi0hsck_mux_vmstate; +} + +static const TypeInfo cprman_dsi0hsck_mux_info = { + .name = TYPE_CPRMAN_DSI0HSCK_MUX, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanDsi0HsckMuxState), + .class_init = dsi0hsck_mux_class_init, + .instance_init = dsi0hsck_mux_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, case R_CM_EMMC2CTL ... R_CM_EMMC2DIV: update_mux_from_cm(s, idx); break; + + case R_CM_DSI0HSCK: + dsi0hsck_mux_update(&s->dsi0hsck_mux); + break; } } @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->channels[i])); } + device_cold_reset(DEVICE(&s->dsi0hsck_mux)); + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { device_cold_reset(DEVICE(&s->clock_muxes[i])); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_channel_init_info(s, &s->channels[i], i); } + object_initialize_child(obj, "dsi0hsck-mux", + &s->dsi0hsck_mux, TYPE_CPRMAN_DSI0HSCK_MUX); + s->dsi0hsck_mux.reg_cm = &s->regs[R_CM_DSI0HSCK]; + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { char *alias; @@ -XXX,XX +XXX,XX @@ static void connect_mux_sources(BCM2835CprmanState *s, if (mapping == CPRMAN_CLOCK_SRC_FORCE_GROUND) { src = s->gnd; } else if (mapping == CPRMAN_CLOCK_SRC_DSI0HSCK) { - src = s->gnd; /* TODO */ + src = s->dsi0hsck_mux.out; } else if (i < CPRMAN_CLOCK_SRC_PLLA) { src = CLK_SRC_MAPPING[i]; } else { @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) } } + clock_set_source(s->dsi0hsck_mux.plla_in, + s->channels[CPRMAN_PLLA_CHANNEL_DSI0].out); + clock_set_source(s->dsi0hsck_mux.plld_in, + s->channels[CPRMAN_PLLD_CHANNEL_DSI0].out); + + if (!qdev_realize(DEVICE(&s->dsi0hsck_mux), NULL, errp)) { + return; + } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { CprmanClockMuxState *clock_mux = &s->clock_muxes[i]; @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) type_register_static(&cprman_pll_info); type_register_static(&cprman_pll_channel_info); type_register_static(&cprman_clock_mux_info); + type_register_static(&cprman_dsi0hsck_mux_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Those reset values have been extracted from a Raspberry Pi 3 model B v1.2, using the 2020-08-20 version of raspios. The dump was done using the debugfs interface of the CPRMAN driver in Linux (under '/sys/kernel/debug/clk'). Each exposed clock tree stage (PLLs, channels and muxes) can be observed by reading the 'regdump' file (e.g. 'plla/regdump'). Those values are set by the Raspberry Pi firmware at boot time (Linux expects them to be set when it boots up). Some stages are not exposed by the Linux driver (e.g. the PLL B). For those, the reset values are unknown and left to 0 which implies a disabled output. Once booted in QEMU, the final clock tree is very similar to the one visible on real hardware. The differences come from some unimplemented devices for which the driver simply disable the corresponding clock. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman_internals.h | 269 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 31 +++ 2 files changed, 300 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ static inline void set_clock_mux_init_info(BCM2835CprmanState *s, mux->frac_bits = CLOCK_MUX_INIT_INFO[id].frac_bits; } + +/* + * Object reset info + * Those values have been dumped from a Raspberry Pi 3 Model B v1.2 using the + * clk debugfs interface in Linux. + */ +typedef struct PLLResetInfo { + uint32_t cm; + uint32_t a2w_ctrl; + uint32_t a2w_ana[4]; + uint32_t a2w_frac; +} PLLResetInfo; + +static const PLLResetInfo PLL_RESET_INFO[] = { + [CPRMAN_PLLA] = { + .cm = 0x0000008a, + .a2w_ctrl = 0x0002103a, + .a2w_frac = 0x00098000, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLC] = { + .cm = 0x00000228, + .a2w_ctrl = 0x0002103e, + .a2w_frac = 0x00080000, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLD] = { + .cm = 0x0000020a, + .a2w_ctrl = 0x00021034, + .a2w_frac = 0x00015556, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLH] = { + .cm = 0x00000000, + .a2w_ctrl = 0x0002102d, + .a2w_frac = 0x00000000, + .a2w_ana = { 0x00900000, 0x0000000c, 0x00000000, 0x00000000 } + }, + + [CPRMAN_PLLB] = { + /* unknown */ + .cm = 0x00000000, + .a2w_ctrl = 0x00000000, + .a2w_frac = 0x00000000, + .a2w_ana = { 0x00000000, 0x00000000, 0x00000000, 0x00000000 } + } +}; + +typedef struct PLLChannelResetInfo { + /* + * Even though a PLL channel has a CM register, it shares it with its + * parent PLL. The parent already takes care of the reset value. + */ + uint32_t a2w_ctrl; +} PLLChannelResetInfo; + +static const PLLChannelResetInfo PLL_CHANNEL_RESET_INFO[] = { + [CPRMAN_PLLA_CHANNEL_DSI0] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLA_CHANNEL_CORE] = { .a2w_ctrl = 0x00000003 }, + [CPRMAN_PLLA_CHANNEL_PER] = { .a2w_ctrl = 0x00000000 }, /* unknown */ + [CPRMAN_PLLA_CHANNEL_CCP2] = { .a2w_ctrl = 0x00000100 }, + + [CPRMAN_PLLC_CHANNEL_CORE2] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLC_CHANNEL_CORE1] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLC_CHANNEL_PER] = { .a2w_ctrl = 0x00000002 }, + [CPRMAN_PLLC_CHANNEL_CORE0] = { .a2w_ctrl = 0x00000002 }, + + [CPRMAN_PLLD_CHANNEL_DSI0] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLD_CHANNEL_CORE] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLD_CHANNEL_PER] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLD_CHANNEL_DSI1] = { .a2w_ctrl = 0x00000100 }, + + [CPRMAN_PLLH_CHANNEL_AUX] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLH_CHANNEL_RCAL] = { .a2w_ctrl = 0x00000000 }, + [CPRMAN_PLLH_CHANNEL_PIX] = { .a2w_ctrl = 0x00000000 }, + + [CPRMAN_PLLB_CHANNEL_ARM] = { .a2w_ctrl = 0x00000000 }, /* unknown */ +}; + +typedef struct ClockMuxResetInfo { + uint32_t cm_ctl; + uint32_t cm_div; +} ClockMuxResetInfo; + +static const ClockMuxResetInfo CLOCK_MUX_RESET_INFO[] = { + [CPRMAN_CLOCK_GNRIC] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_VPU] = { + .cm_ctl = 0x00000245, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_SYS] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_PERIA] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_PERII] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_H264] = { + .cm_ctl = 0x00000244, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_ISP] = { + .cm_ctl = 0x00000244, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_V3D] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_CAM0] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_CAM1] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_CCP2] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_DSI0E] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_DSI0P] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_DPI] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_GP0] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_GP1] = { + .cm_ctl = 0x00000096, + .cm_div = 0x00014000, + }, + + [CPRMAN_CLOCK_GP2] = { + .cm_ctl = 0x00000291, + .cm_div = 0x00249f00, + }, + + [CPRMAN_CLOCK_HSM] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_OTP] = { + .cm_ctl = 0x00000091, + .cm_div = 0x00004000, + }, + + [CPRMAN_CLOCK_PCM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_PWM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_SLIM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_SMI] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_TEC] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_TD0] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_TD1] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_TSENS] = { + .cm_ctl = 0x00000091, + .cm_div = 0x0000a000, + }, + + [CPRMAN_CLOCK_TIMER] = { + .cm_ctl = 0x00000291, + .cm_div = 0x00013333, + }, + + [CPRMAN_CLOCK_UART] = { + .cm_ctl = 0x00000296, + .cm_div = 0x0000a6ab, + }, + + [CPRMAN_CLOCK_VEC] = { + .cm_ctl = 0x00000097, + .cm_div = 0x00002000, + }, + + [CPRMAN_CLOCK_PULSE] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_SDC] = { + .cm_ctl = 0x00004006, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_ARM] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_AVEO] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_EMMC] = { + .cm_ctl = 0x00000295, + .cm_div = 0x00006000, + }, + + [CPRMAN_CLOCK_EMMC2] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, +}; + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ /* PLL */ +static void pll_reset(DeviceState *dev) +{ + CprmanPllState *s = CPRMAN_PLL(dev); + const PLLResetInfo *info = &PLL_RESET_INFO[s->id]; + + *s->reg_cm = info->cm; + *s->reg_a2w_ctrl = info->a2w_ctrl; + memcpy(s->reg_a2w_ana, info->a2w_ana, sizeof(info->a2w_ana)); + *s->reg_a2w_frac = info->a2w_frac; +} + static bool pll_is_locked(const CprmanPllState *pll) { return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN) @@ -XXX,XX +XXX,XX @@ static void pll_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = pll_reset; dc->vmsd = &pll_vmstate; } @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* PLL channel */ +static void pll_channel_reset(DeviceState *dev) +{ + CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(dev); + const PLLChannelResetInfo *info = &PLL_CHANNEL_RESET_INFO[s->id]; + + *s->reg_a2w_ctrl = info->a2w_ctrl; +} + static bool pll_channel_is_enabled(CprmanPllChannelState *channel) { /* @@ -XXX,XX +XXX,XX @@ static void pll_channel_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = pll_channel_reset; dc->vmsd = &pll_channel_vmstate; } @@ -XXX,XX +XXX,XX @@ static void clock_mux_src_update(void *opaque) clock_mux_update(s); } +static void clock_mux_reset(DeviceState *dev) +{ + CprmanClockMuxState *clock = CPRMAN_CLOCK_MUX(dev); + const ClockMuxResetInfo *info = &CLOCK_MUX_RESET_INFO[clock->id]; + + *clock->reg_ctl = info->cm_ctl; + *clock->reg_div = info->cm_div; +} + static void clock_mux_init(Object *obj) { CprmanClockMuxState *s = CPRMAN_CLOCK_MUX(obj); @@ -XXX,XX +XXX,XX @@ static void clock_mux_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = clock_mux_reset; dc->vmsd = &clock_mux_vmstate; } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Add a clock input to the PL011 UART so we can compute the current baud rate and trace it. This is intended for developers who wish to use QEMU to e.g. debug their firmware or to figure out the baud rate configured by an unknown/closed source binary. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/pl011.h | 1 + hw/char/pl011.c | 45 +++++++++++++++++++++++++++++++++++++++++ hw/char/trace-events | 1 + 3 files changed, 47 insertions(+) diff --git a/include/hw/char/pl011.h b/include/hw/char/pl011.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/pl011.h +++ b/include/hw/char/pl011.h @@ -XXX,XX +XXX,XX @@ struct PL011State { int read_trigger; CharBackend chr; qemu_irq irq[6]; + Clock *clk; const unsigned char *id; }; diff --git a/hw/char/pl011.c b/hw/char/pl011.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/pl011.c +++ b/hw/char/pl011.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/pl011.h" #include "hw/irq.h" #include "hw/sysbus.h" +#include "hw/qdev-clock.h" #include "migration/vmstate.h" #include "chardev/char-fe.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ static void pl011_set_read_trigger(PL011State *s) s->read_trigger = 1; } +static unsigned int pl011_get_baudrate(const PL011State *s) +{ + uint64_t clk; + + if (s->fbrd == 0) { + return 0; + } + + clk = clock_get_hz(s->clk); + return (clk / ((s->ibrd << 6) + s->fbrd)) << 2; +} + +static void pl011_trace_baudrate_change(const PL011State *s) +{ + trace_pl011_baudrate_change(pl011_get_baudrate(s), + clock_get_hz(s->clk), + s->ibrd, s->fbrd); +} + static void pl011_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void pl011_write(void *opaque, hwaddr offset, break; case 9: /* UARTIBRD */ s->ibrd = value; + pl011_trace_baudrate_change(s); break; case 10: /* UARTFBRD */ s->fbrd = value; + pl011_trace_baudrate_change(s); break; case 11: /* UARTLCR_H */ /* Reset the FIFO state on FIFO enable or disable */ @@ -XXX,XX +XXX,XX @@ static void pl011_event(void *opaque, QEMUChrEvent event) pl011_put_fifo(opaque, 0x400); } +static void pl011_clock_update(void *opaque) +{ + PL011State *s = PL011(opaque); + + pl011_trace_baudrate_change(s); +} + static const MemoryRegionOps pl011_ops = { .read = pl011_read, .write = pl011_write, .endianness = DEVICE_NATIVE_ENDIAN, }; +static const VMStateDescription vmstate_pl011_clock = { + .name = "pl011/clock", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(clk, PL011State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_pl011 = { .name = "pl011", .version_id = 2, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pl011 = { VMSTATE_INT32(read_count, PL011State), VMSTATE_INT32(read_trigger, PL011State), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_pl011_clock, + NULL } }; @@ -XXX,XX +XXX,XX @@ static void pl011_init(Object *obj) sysbus_init_irq(sbd, &s->irq[i]); } + s->clk = qdev_init_clock_in(DEVICE(obj), "clk", pl011_clock_update, s); + s->read_trigger = 1; s->ifl = 0x12; s->cr = 0x300; diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ pl011_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR 0x%08x read_count %d returning %d" pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d" pl011_put_fifo_full(void) "FIFO now full, RXFF set" +pl011_baudrate_change(unsigned int baudrate, uint64_t clock, uint32_t ibrd, uint32_t fbrd) "new baudrate %u (clk: %" PRIu64 "hz, ibrd: %" PRIu32 ", fbrd: %" PRIu32 ")" # cmsdk-apb-uart.c cmsdk_apb_uart_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Connect the 'uart-out' clock from the CPRMAN to the PL011 instance. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2835_peripherals.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) } memory_region_add_subregion(&s->peri_mr, CPRMAN_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cprman), 0)); + qdev_connect_clock_in(DEVICE(&s->uart0), "clk", + qdev_get_clock_out(DEVICE(&s->cprman), "uart-out")); memory_region_add_subregion(&s->peri_mr, ARMCTRL_IC_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ic), 0)); -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Generic watchdog device model implementation as per ARM SBSA v6.0 Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Message-id: 20201027015927.29495-2-shashi.mallela@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/sbsa_gwdt.h | 79 +++++++++ hw/watchdog/sbsa_gwdt.c | 293 ++++++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/watchdog/Kconfig | 3 + hw/watchdog/meson.build | 1 + 5 files changed, 377 insertions(+) create mode 100644 include/hw/watchdog/sbsa_gwdt.h create mode 100644 hw/watchdog/sbsa_gwdt.c diff --git a/include/hw/watchdog/sbsa_gwdt.h b/include/hw/watchdog/sbsa_gwdt.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/watchdog/sbsa_gwdt.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2020 Linaro Limited + * + * Authors: + * Shashi Mallela <shashi.mallela@linaro.org> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + +#ifndef WDT_SBSA_GWDT_H +#define WDT_SBSA_GWDT_H + +#include "qemu/bitops.h" +#include "hw/sysbus.h" +#include "hw/irq.h" + +#define TYPE_WDT_SBSA "sbsa_gwdt" +#define SBSA_GWDT(obj) \ + OBJECT_CHECK(SBSA_GWDTState, (obj), TYPE_WDT_SBSA) +#define SBSA_GWDT_CLASS(klass) \ + OBJECT_CLASS_CHECK(SBSA_GWDTClass, (klass), TYPE_WDT_SBSA) +#define SBSA_GWDT_GET_CLASS(obj) \ + OBJECT_GET_CLASS(SBSA_GWDTClass, (obj), TYPE_WDT_SBSA) + +/* SBSA Generic Watchdog register definitions */ +/* refresh frame */ +#define SBSA_GWDT_WRR 0x000 + +/* control frame */ +#define SBSA_GWDT_WCS 0x000 +#define SBSA_GWDT_WOR 0x008 +#define SBSA_GWDT_WORU 0x00C +#define SBSA_GWDT_WCV 0x010 +#define SBSA_GWDT_WCVU 0x014 + +/* Watchdog Interface Identification Register */ +#define SBSA_GWDT_W_IIDR 0xFCC + +/* Watchdog Control and Status Register Bits */ +#define SBSA_GWDT_WCS_EN BIT(0) +#define SBSA_GWDT_WCS_WS0 BIT(1) +#define SBSA_GWDT_WCS_WS1 BIT(2) + +#define SBSA_GWDT_WOR_MASK 0x0000FFFF + +/* + * Watchdog Interface Identification Register definition + * considering JEP106 code for ARM in Bits [11:0] + */ +#define SBSA_GWDT_ID 0x1043B + +/* 2 Separate memory regions for each of refresh & control register frames */ +#define SBSA_GWDT_RMMIO_SIZE 0x1000 +#define SBSA_GWDT_CMMIO_SIZE 0x1000 + +#define SBSA_TIMER_FREQ 62500000 /* Hz */ + +typedef struct SBSA_GWDTState { + /* <private> */ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion rmmio; + MemoryRegion cmmio; + qemu_irq irq; + + QEMUTimer *timer; + + uint32_t id; + uint32_t wcs; + uint32_t worl; + uint32_t woru; + uint32_t wcvl; + uint32_t wcvu; +} SBSA_GWDTState; + +#endif /* WDT_SBSA_GWDT_H */ diff --git a/hw/watchdog/sbsa_gwdt.c b/hw/watchdog/sbsa_gwdt.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/watchdog/sbsa_gwdt.c @@ -XXX,XX +XXX,XX @@ +/* + * Generic watchdog device model for SBSA + * + * The watchdog device has been implemented as revision 1 variant of + * the ARM SBSA specification v6.0 + * (https://developer.arm.com/documentation/den0029/d?lang=en) + * + * Copyright Linaro.org 2020 + * + * Authors: + * Shashi Mallela <shashi.mallela@linaro.org> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "sysemu/reset.h" +#include "sysemu/watchdog.h" +#include "hw/watchdog/sbsa_gwdt.h" +#include "qemu/timer.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" + +static WatchdogTimerModel model = { + .wdt_name = TYPE_WDT_SBSA, + .wdt_description = "SBSA-compliant generic watchdog device", +}; + +static const VMStateDescription vmstate_sbsa_gwdt = { + .name = "sbsa-gwdt", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_TIMER_PTR(timer, SBSA_GWDTState), + VMSTATE_UINT32(wcs, SBSA_GWDTState), + VMSTATE_UINT32(worl, SBSA_GWDTState), + VMSTATE_UINT32(woru, SBSA_GWDTState), + VMSTATE_UINT32(wcvl, SBSA_GWDTState), + VMSTATE_UINT32(wcvu, SBSA_GWDTState), + VMSTATE_END_OF_LIST() + } +}; + +typedef enum WdtRefreshType { + EXPLICIT_REFRESH = 0, + TIMEOUT_REFRESH = 1, +} WdtRefreshType; + +static uint64_t sbsa_gwdt_rread(void *opaque, hwaddr addr, unsigned int size) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + uint32_t ret = 0; + + switch (addr) { + case SBSA_GWDT_WRR: + /* watch refresh read has no effect and returns 0 */ + ret = 0; + break; + case SBSA_GWDT_W_IIDR: + ret = s->id; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in refresh frame read :" + " 0x%x\n", (int)addr); + } + return ret; +} + +static uint64_t sbsa_gwdt_read(void *opaque, hwaddr addr, unsigned int size) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + uint32_t ret = 0; + + switch (addr) { + case SBSA_GWDT_WCS: + ret = s->wcs; + break; + case SBSA_GWDT_WOR: + ret = s->worl; + break; + case SBSA_GWDT_WORU: + ret = s->woru; + break; + case SBSA_GWDT_WCV: + ret = s->wcvl; + break; + case SBSA_GWDT_WCVU: + ret = s->wcvu; + break; + case SBSA_GWDT_W_IIDR: + ret = s->id; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in control frame read :" + " 0x%x\n", (int)addr); + } + return ret; +} + +static void sbsa_gwdt_update_timer(SBSA_GWDTState *s, WdtRefreshType rtype) +{ + uint64_t timeout = 0; + + timer_del(s->timer); + + if (s->wcs & SBSA_GWDT_WCS_EN) { + /* + * Extract the upper 16 bits from woru & 32 bits from worl + * registers to construct the 48 bit offset value + */ + timeout = s->woru; + timeout <<= 32; + timeout |= s->worl; + timeout = muldiv64(timeout, NANOSECONDS_PER_SECOND, SBSA_TIMER_FREQ); + timeout += qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + if ((rtype == EXPLICIT_REFRESH) || ((rtype == TIMEOUT_REFRESH) && + (!(s->wcs & SBSA_GWDT_WCS_WS0)))) { + /* store the current timeout value into compare registers */ + s->wcvu = timeout >> 32; + s->wcvl = timeout; + } + timer_mod(s->timer, timeout); + } +} + +static void sbsa_gwdt_rwrite(void *opaque, hwaddr offset, uint64_t data, + unsigned size) { + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + if (offset == SBSA_GWDT_WRR) { + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "bad address in refresh frame write :" + " 0x%x\n", (int)offset); + } +} + +static void sbsa_gwdt_write(void *opaque, hwaddr offset, uint64_t data, + unsigned size) { + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + switch (offset) { + case SBSA_GWDT_WCS: + s->wcs = data & SBSA_GWDT_WCS_EN; + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WOR: + s->worl = data; + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WORU: + s->woru = data & SBSA_GWDT_WOR_MASK; + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WCV: + s->wcvl = data; + break; + + case SBSA_GWDT_WCVU: + s->wcvu = data; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in control frame write :" + " 0x%x\n", (int)offset); + } + return; +} + +static void wdt_sbsa_gwdt_reset(DeviceState *dev) +{ + SBSA_GWDTState *s = SBSA_GWDT(dev); + + timer_del(s->timer); + + s->wcs = 0; + s->wcvl = 0; + s->wcvu = 0; + s->worl = 0; + s->woru = 0; + s->id = SBSA_GWDT_ID; +} + +static void sbsa_gwdt_timer_sysinterrupt(void *opaque) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + if (!(s->wcs & SBSA_GWDT_WCS_WS0)) { + s->wcs |= SBSA_GWDT_WCS_WS0; + sbsa_gwdt_update_timer(s, TIMEOUT_REFRESH); + qemu_set_irq(s->irq, 1); + } else { + s->wcs |= SBSA_GWDT_WCS_WS1; + qemu_log_mask(CPU_LOG_RESET, "Watchdog timer expired.\n"); + /* + * Reset the watchdog only if the guest gets notified about + * expiry. watchdog_perform_action() may temporarily relinquish + * the BQL; reset before triggering the action to avoid races with + * sbsa_gwdt instructions. + */ + switch (get_watchdog_action()) { + case WATCHDOG_ACTION_DEBUG: + case WATCHDOG_ACTION_NONE: + case WATCHDOG_ACTION_PAUSE: + break; + default: + wdt_sbsa_gwdt_reset(DEVICE(s)); + } + watchdog_perform_action(); + } +} + +static const MemoryRegionOps sbsa_gwdt_rops = { + .read = sbsa_gwdt_rread, + .write = sbsa_gwdt_rwrite, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .valid.unaligned = false, +}; + +static const MemoryRegionOps sbsa_gwdt_ops = { + .read = sbsa_gwdt_read, + .write = sbsa_gwdt_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .valid.unaligned = false, +}; + +static void wdt_sbsa_gwdt_realize(DeviceState *dev, Error **errp) +{ + SBSA_GWDTState *s = SBSA_GWDT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + memory_region_init_io(&s->rmmio, OBJECT(dev), + &sbsa_gwdt_rops, s, + "sbsa_gwdt.refresh", + SBSA_GWDT_RMMIO_SIZE); + + memory_region_init_io(&s->cmmio, OBJECT(dev), + &sbsa_gwdt_ops, s, + "sbsa_gwdt.control", + SBSA_GWDT_CMMIO_SIZE); + + sysbus_init_mmio(sbd, &s->rmmio); + sysbus_init_mmio(sbd, &s->cmmio); + + sysbus_init_irq(sbd, &s->irq); + + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sbsa_gwdt_timer_sysinterrupt, + dev); +} + +static void wdt_sbsa_gwdt_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = wdt_sbsa_gwdt_realize; + dc->reset = wdt_sbsa_gwdt_reset; + dc->hotpluggable = false; + set_bit(DEVICE_CATEGORY_MISC, dc->categories); + dc->vmsd = &vmstate_sbsa_gwdt; +} + +static const TypeInfo wdt_sbsa_gwdt_info = { + .class_init = wdt_sbsa_gwdt_class_init, + .parent = TYPE_SYS_BUS_DEVICE, + .name = TYPE_WDT_SBSA, + .instance_size = sizeof(SBSA_GWDTState), +}; + +static void wdt_sbsa_gwdt_register_types(void) +{ + watchdog_add_model(&model); + type_register_static(&wdt_sbsa_gwdt_info); +} + +type_init(wdt_sbsa_gwdt_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config SBSA_REF select PL031 # RTC select PL061 # GPIO select USB_EHCI_SYSBUS + select WDT_SBSA config SABRELITE bool diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Kconfig +++ b/hw/watchdog/Kconfig @@ -XXX,XX +XXX,XX @@ config WDT_DIAG288 config WDT_IMX2 bool + +config WDT_SBSA + bool diff --git a/hw/watchdog/meson.build b/hw/watchdog/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/meson.build +++ b/hw/watchdog/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_WDT_IB700', if_true: files('wdt_ib700.c')) softmmu_ss.add(when: 'CONFIG_WDT_DIAG288', if_true: files('wdt_diag288.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('wdt_aspeed.c')) softmmu_ss.add(when: 'CONFIG_WDT_IMX2', if_true: files('wdt_imx2.c')) +softmmu_ss.add(when: 'CONFIG_WDT_SBSA', if_true: files('sbsa_gwdt.c')) -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Included the newly implemented SBSA generic watchdog device model into SBSA platform Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201027015927.29495-3-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/usb.h" #include "hw/char/pl011.h" +#include "hw/watchdog/sbsa_gwdt.h" #include "net/net.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ enum { SBSA_GIC_DIST, SBSA_GIC_REDIST, SBSA_SECURE_EC, + SBSA_GWDT, + SBSA_GWDT_REFRESH, + SBSA_GWDT_CONTROL, SBSA_SMMU, SBSA_UART, SBSA_RTC, @@ -XXX,XX +XXX,XX @@ static const MemMapEntry sbsa_ref_memmap[] = { [SBSA_GIC_DIST] = { 0x40060000, 0x00010000 }, [SBSA_GIC_REDIST] = { 0x40080000, 0x04000000 }, [SBSA_SECURE_EC] = { 0x50000000, 0x00001000 }, + [SBSA_GWDT_REFRESH] = { 0x50010000, 0x00001000 }, + [SBSA_GWDT_CONTROL] = { 0x50011000, 0x00001000 }, [SBSA_UART] = { 0x60000000, 0x00001000 }, [SBSA_RTC] = { 0x60010000, 0x00001000 }, [SBSA_GPIO] = { 0x60020000, 0x00001000 }, @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { [SBSA_AHCI] = 10, [SBSA_EHCI] = 11, [SBSA_SMMU] = 12, /* ... to 15 */ + [SBSA_GWDT] = 16, }; static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx) @@ -XXX,XX +XXX,XX @@ static void create_rtc(const SBSAMachineState *sms) sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic, irq)); } +static void create_wdt(const SBSAMachineState *sms) +{ + hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base; + hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base; + DeviceState *dev = qdev_new(TYPE_WDT_SBSA); + SysBusDevice *s = SYS_BUS_DEVICE(dev); + int irq = sbsa_ref_irqmap[SBSA_GWDT]; + + sysbus_realize_and_unref(s, &error_fatal); + sysbus_mmio_map(s, 0, rbase); + sysbus_mmio_map(s, 1, cbase); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq)); +} + static DeviceState *gpio_key_dev; static void sbsa_ref_powerdown_req(Notifier *n, void *opaque) { @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) create_rtc(sms); + create_wdt(sms); + create_gpio(sms); create_ahci(sms); -- 2.20.1 In ptimer_reload(), we call the callback function provided by the timer device that is using the ptimer. This callback might disable the ptimer. The code mostly handles this correctly, except that we'll still print the warning about "Timer with delta zero, disabling" if the now-disabled timer happened to be set such that it would fire again immediately if it were enabled (eg because the limit/reload value is zero). Suppress the spurious warning message and the unnecessary repeat-deletion of the underlying timer in this case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20201015151829.14656-2-peter.maydell@linaro.org --- hw/core/ptimer.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ static void ptimer_reload(ptimer_state *s, int delta_adjust) } if (delta == 0) { + if (s->enabled == 0) { + /* trigger callback disabled the timer already */ + return; + } if (!qtest_enabled()) { fprintf(stderr, "Timer with delta zero, disabling\n"); } -- 2.20.1 The armv7m systick timer is a 24-bit decrementing, wrap-on-zero, clear-on-write counter. Our current implementation has various bugs and dubious workarounds in it (for instance see https://bugs.launchpad.net/qemu/+bug/1872237). We have an implementation of a simple decrementing counter and we put a lot of effort into making sure it handles the interesting corner cases (like "spend a cycle at 0 before reloading") -- ptimer. Rewrite the systick timer to use a ptimer rather than a raw QEMU timer. Unfortunately this is a migration compatibility break, which will affect all M-profile boards. Among other bugs, this fixes https://bugs.launchpad.net/qemu/+bug/1872237 : now writes to SYST_CVR when the timer is enabled correctly do nothing; when the timer is enabled via SYST_CSR.ENABLE, the ptimer code will (because of POLICY_NO_IMMEDIATE_RELOAD) arrange that after one timer tick the counter is reloaded from SYST_RVR and then counts down from there, as the architecture requires. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201015151829.14656-3-peter.maydell@linaro.org --- include/hw/timer/armv7m_systick.h | 3 +- hw/timer/armv7m_systick.c | 124 +++++++++++++----------------- 2 files changed, 54 insertions(+), 73 deletions(-) diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/armv7m_systick.h +++ b/include/hw/timer/armv7m_systick.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qom/object.h" +#include "hw/ptimer.h" #define TYPE_SYSTICK "armv7m_systick" @@ -XXX,XX +XXX,XX @@ struct SysTickState { uint32_t control; uint32_t reload; int64_t tick; - QEMUTimer *timer; + ptimer_state *ptimer; MemoryRegion iomem; qemu_irq irq; }; diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/armv7m_systick.c +++ b/hw/timer/armv7m_systick.c @@ -XXX,XX +XXX,XX @@ static inline int64_t systick_scale(SysTickState *s) } } -static void systick_reload(SysTickState *s, int reset) -{ - /* The Cortex-M3 Devices Generic User Guide says that "When the - * ENABLE bit is set to 1, the counter loads the RELOAD value from the - * SYST RVR register and then counts down". So, we need to check the - * ENABLE bit before reloading the value. - */ - trace_systick_reload(); - - if ((s->control & SYSTICK_ENABLE) == 0) { - return; - } - - if (reset) { - s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - } - s->tick += (s->reload + 1) * systick_scale(s); - timer_mod(s->timer, s->tick); -} - static void systick_timer_tick(void *opaque) { SysTickState *s = (SysTickState *)opaque; @@ -XXX,XX +XXX,XX @@ static void systick_timer_tick(void *opaque) /* Tell the NVIC to pend the SysTick exception */ qemu_irq_pulse(s->irq); } - if (s->reload == 0) { - s->control &= ~SYSTICK_ENABLE; - } else { - systick_reload(s, 0); + if (ptimer_get_limit(s->ptimer) == 0) { + /* + * Timer expiry with SYST_RVR zero disables the timer + * (but doesn't clear SYST_CSR.ENABLE) + */ + ptimer_stop(s->ptimer); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult systick_read(void *opaque, hwaddr addr, uint64_t *data, s->control &= ~SYSTICK_COUNTFLAG; break; case 0x4: /* SysTick Reload Value. */ - val = s->reload; + val = ptimer_get_limit(s->ptimer); break; case 0x8: /* SysTick Current Value. */ - { - int64_t t; - - if ((s->control & SYSTICK_ENABLE) == 0) { - val = 0; - break; - } - t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (t >= s->tick) { - val = 0; - break; - } - val = ((s->tick - (t + 1)) / systick_scale(s)) + 1; - /* The interrupt in triggered when the timer reaches zero. - However the counter is not reloaded until the next clock - tick. This is a hack to return zero during the first tick. */ - if (val > s->reload) { - val = 0; - } + val = ptimer_get_count(s->ptimer); break; - } case 0xc: /* SysTick Calibration Value. */ val = 10000; break; @@ -XXX,XX +XXX,XX @@ static MemTxResult systick_write(void *opaque, hwaddr addr, switch (addr) { case 0x0: /* SysTick Control and Status. */ { - uint32_t oldval = s->control; + uint32_t oldval; + ptimer_transaction_begin(s->ptimer); + oldval = s->control; s->control &= 0xfffffff8; s->control |= value & 7; + if ((oldval ^ value) & SYSTICK_ENABLE) { - int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); if (value & SYSTICK_ENABLE) { - if (s->tick) { - s->tick += now; - timer_mod(s->timer, s->tick); - } else { - systick_reload(s, 1); - } + /* + * Always reload the period in case board code has + * changed system_clock_scale. If we ever replace that + * global with a more sensible API then we might be able + * to set the period only when it actually changes. + */ + ptimer_set_period(s->ptimer, systick_scale(s)); + ptimer_run(s->ptimer, 0); } else { - timer_del(s->timer); - s->tick -= now; - if (s->tick < 0) { - s->tick = 0; - } + ptimer_stop(s->ptimer); } } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { - /* This is a hack. Force the timer to be reloaded - when the reference clock is changed. */ - systick_reload(s, 1); + ptimer_set_period(s->ptimer, systick_scale(s)); } + ptimer_transaction_commit(s->ptimer); break; } case 0x4: /* SysTick Reload Value. */ - s->reload = value; + ptimer_transaction_begin(s->ptimer); + ptimer_set_limit(s->ptimer, value & 0xffffff, 0); + ptimer_transaction_commit(s->ptimer); break; - case 0x8: /* SysTick Current Value. Writes reload the timer. */ - systick_reload(s, 1); + case 0x8: /* SysTick Current Value. */ + /* + * Writing any value clears SYST_CVR to zero and clears + * SYST_CSR.COUNTFLAG. The counter will then reload from SYST_RVR + * on the next clock edge unless SYST_RVR is zero. + */ + ptimer_transaction_begin(s->ptimer); + if (ptimer_get_limit(s->ptimer) == 0) { + ptimer_stop(s->ptimer); + } + ptimer_set_count(s->ptimer, 0); s->control &= ~SYSTICK_COUNTFLAG; + ptimer_transaction_commit(s->ptimer); break; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void systick_reset(DeviceState *dev) */ assert(system_clock_scale != 0); + ptimer_transaction_begin(s->ptimer); s->control = 0; - s->reload = 0; - s->tick = 0; - timer_del(s->timer); + ptimer_stop(s->ptimer); + ptimer_set_count(s->ptimer, 0); + ptimer_set_limit(s->ptimer, 0, 0); + ptimer_set_period(s->ptimer, systick_scale(s)); + ptimer_transaction_commit(s->ptimer); } static void systick_instance_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void systick_instance_init(Object *obj) static void systick_realize(DeviceState *dev, Error **errp) { SysTickState *s = SYSTICK(dev); - s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); + s->ptimer = ptimer_init(systick_timer_tick, s, + PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT); } static const VMStateDescription vmstate_systick = { .name = "armv7m_systick", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(control, SysTickState), - VMSTATE_UINT32(reload, SysTickState), VMSTATE_INT64(tick, SysTickState), - VMSTATE_TIMER_PTR(timer, SysTickState), + VMSTATE_PTIMER(ptimer, SysTickState), VMSTATE_END_OF_LIST() } }; -- 2.20.1