target-arm queue: nothing big, just a collection of minor things. -- PMM The following changes since commit ae3aa5da96f4ccf0c2a28851449d92db9fcfad71: Merge remote-tracking branch 'remotes/berrange/tags/socket-next-pull-request' into staging (2020-05-21 16:47:28 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200521 for you to fetch changes up to 17b5df7b65d0192c5d775b5e1581518580774c77: linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 (2020-05-21 20:00:19 +0100) ---------------------------------------------------------------- target-arm queue: * tests/acceptance: Add a test for the canon-a1100 machine * docs/system: Document some of the Arm development boards * linux-user: make BKPT insn cause SIGTRAP, not be a syscall * target/arm: Remove unused GEN_NEON_INTEGER_OP macro * fsl-imx25, fsl-imx31, fsl-imx6, fsl-imx6ul, fsl-imx7: implement watchdog * hw/arm: Use qemu_log_mask() instead of hw_error() in various places * ARM: PL061: Introduce N_GPIOS * target/arm: Improve clear_vec_high() usage * target/arm: Allow user-mode code to write CPSR.E via MSR * linux-user/arm: Reset CPSR_E when entering a signal handler * linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 ---------------------------------------------------------------- Amanieu d'Antras (1): linux-user/arm: Reset CPSR_E when entering a signal handler Geert Uytterhoeven (1): ARM: PL061: Introduce N_GPIOS Guenter Roeck (8): hw: Move i.MX watchdog driver to hw/watchdog hw/watchdog: Implement full i.MX watchdog support hw/arm/fsl-imx25: Wire up watchdog hw/arm/fsl-imx31: Wire up watchdog hw/arm/fsl-imx6: Connect watchdog interrupts hw/arm/fsl-imx6ul: Connect watchdog interrupts hw/arm/fsl-imx7: Instantiate various unimplemented devices hw/arm/fsl-imx7: Connect watchdog interrupts Peter Maydell (12): docs/system: Add 'Arm' to the Integrator/CP document title docs/system: Sort Arm board index into alphabetical order docs/system: Document Arm Versatile Express boards docs/system: Document the various MPS2 models docs/system: Document Musca boards linux-user/arm: BKPT should cause SIGTRAP, not be a syscall linux-user/arm: Remove bogus SVC 0xf0002 handling linux-user/arm: Handle invalid arm-specific syscalls correctly linux-user/arm: Fix identification of syscall numbers target/arm: Remove unused GEN_NEON_INTEGER_OP macro target/arm: Allow user-mode code to write CPSR.E via MSR linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 Philippe Mathieu-Daudé (4): hw/arm/integratorcp: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask() hw/char/xilinx_uartlite: Replace hw_error() by qemu_log_mask() hw/timer/exynos4210_mct: Replace hw_error() by qemu_log_mask() Richard Henderson (2): target/arm: Use tcg_gen_gvec_mov for clear_vec_high target/arm: Use clear_vec_high more effectively Thomas Huth (1): tests/acceptance: Add a test for the canon-a1100 machine docs/system/arm/integratorcp.rst | 4 +- docs/system/arm/mps2.rst | 29 +++ docs/system/arm/musca.rst | 31 +++ docs/system/arm/vexpress.rst | 60 ++++++ docs/system/target-arm.rst | 20 +- include/hw/arm/fsl-imx25.h | 5 + include/hw/arm/fsl-imx31.h | 4 + include/hw/arm/fsl-imx6.h | 2 +- include/hw/arm/fsl-imx6ul.h | 2 +- include/hw/arm/fsl-imx7.h | 23 ++- include/hw/misc/imx2_wdt.h | 33 ---- include/hw/watchdog/wdt_imx2.h | 90 +++++++++ target/arm/cpu.h | 2 +- hw/arm/fsl-imx25.c | 10 + hw/arm/fsl-imx31.c | 6 + hw/arm/fsl-imx6.c | 9 + hw/arm/fsl-imx6ul.c | 10 + hw/arm/fsl-imx7.c | 35 ++++ hw/arm/integratorcp.c | 23 ++- hw/arm/pxa2xx_gpio.c | 7 +- hw/char/xilinx_uartlite.c | 5 +- hw/display/pxa2xx_lcd.c | 8 +- hw/dma/pxa2xx_dma.c | 14 +- hw/gpio/pl061.c | 12 +- hw/misc/imx2_wdt.c | 90 --------- hw/timer/exynos4210_mct.c | 12 +- hw/watchdog/wdt_imx2.c | 303 +++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 145 ++++++++------ linux-user/arm/signal.c | 15 +- target/arm/translate-a64.c | 63 +++--- target/arm/translate.c | 23 --- MAINTAINERS | 6 + hw/arm/Kconfig | 5 + hw/misc/Makefile.objs | 1 - hw/watchdog/Kconfig | 3 + hw/watchdog/Makefile.objs | 1 + tests/acceptance/machine_arm_canona1100.py | 35 ++++ 37 files changed, 854 insertions(+), 292 deletions(-) create mode 100644 docs/system/arm/mps2.rst create mode 100644 docs/system/arm/musca.rst create mode 100644 docs/system/arm/vexpress.rst delete mode 100644 include/hw/misc/imx2_wdt.h create mode 100644 include/hw/watchdog/wdt_imx2.h delete mode 100644 hw/misc/imx2_wdt.c create mode 100644 hw/watchdog/wdt_imx2.c create mode 100644 tests/acceptance/machine_arm_canona1100.py From: Thomas Huth <thuth@redhat.com> The canon-a1100 machine can be used with the Barebox firmware. The QEMU Advent Calendar 2018 features a pre-compiled image which we can use for testing. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200514190422.23645-1-f4bug@amsat.org Message-Id: <20200129090420.13954-1-thuth@redhat.com> [PMD: Rebased MAINTAINERS] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/acceptance/machine_arm_canona1100.py | 35 ++++++++++++++++++++++ 2 files changed, 36 insertions(+) create mode 100644 tests/acceptance/machine_arm_canona1100.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: include/hw/arm/digic.h F: hw/*/digic* F: include/hw/*/digic* +F: tests/acceptance/machine_arm_canona1100.py Goldfish RTC M: Anup Patel <anup.patel@wdc.com> diff --git a/tests/acceptance/machine_arm_canona1100.py b/tests/acceptance/machine_arm_canona1100.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/acceptance/machine_arm_canona1100.py @@ -XXX,XX +XXX,XX @@ +# Functional test that boots the canon-a1100 machine with firmware +# +# Copyright (c) 2020 Red Hat, Inc. +# +# Author: +# Thomas Huth <thuth@redhat.com> +# +# This work is licensed under the terms of the GNU GPL, version 2 or +# later. See the COPYING file in the top-level directory. + +from avocado_qemu import Test +from avocado_qemu import wait_for_console_pattern +from avocado.utils import archive + +class CanonA1100Machine(Test): + """Boots the barebox firmware and checks that the console is operational""" + + timeout = 90 + + def test_arm_canona1100(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:canon-a1100 + :avocado: tags=device:pflash_cfi02 + """ + tar_url = ('https://www.qemu-advent-calendar.org' + '/2018/download/day18.tar.xz') + tar_hash = '068b5fc4242b29381acee94713509f8a876e9db6' + file_path = self.fetch_asset(tar_url, asset_hash=tar_hash) + archive.extract(file_path, self.workdir) + self.vm.set_console() + self.vm.add_args('-bios', + self.workdir + '/day18/barebox.canon-a1100.bin') + self.vm.launch() + wait_for_console_pattern(self, 'running /env/bin/init') -- 2.20.1 Add 'Arm' to the Integrator/CP document title, for consistency with the titling of the other documentation of Arm devboard models (versatile, realview). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-2-peter.maydell@linaro.org --- docs/system/arm/integratorcp.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/integratorcp.rst b/docs/system/arm/integratorcp.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/integratorcp.rst +++ b/docs/system/arm/integratorcp.rst @@ -XXX,XX +XXX,XX @@ -Integrator/CP (``integratorcp``) -================================ +Arm Integrator/CP (``integratorcp``) +==================================== The Arm Integrator/CP board is emulated with the following devices: -- 2.20.1 Sort the board index into alphabetical order. (Note that we need to sort alphabetically by the title text of each file, which isn't the same ordering as sorting by the filename.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-3-peter.maydell@linaro.org --- docs/system/target-arm.rst | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Unfortunately many of the Arm boards QEMU supports are currently undocumented; you can get a complete list by running ``qemu-system-aarch64 --machine help``. +.. + This table of contents should be kept sorted alphabetically + by the title text of each file, which isn't the same ordering + as an alphabetical sort by filename. + .. toctree:: :maxdepth: 1 arm/integratorcp - arm/versatile arm/realview - arm/xscale - arm/palm - arm/nseries - arm/stellaris + arm/versatile arm/musicpal - arm/sx1 + arm/nseries arm/orangepi + arm/palm + arm/xscale + arm/sx1 + arm/stellaris Arm CPU features ================ -- 2.20.1 Provide a minimal documentation of the Versatile Express boards (vexpress-a9, vexpress-a15). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-4-peter.maydell@linaro.org --- docs/system/arm/vexpress.rst | 60 ++++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 62 insertions(+) create mode 100644 docs/system/arm/vexpress.rst diff --git a/docs/system/arm/vexpress.rst b/docs/system/arm/vexpress.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/vexpress.rst @@ -XXX,XX +XXX,XX @@ +Arm Versatile Express boards (``vexpress-a9``, ``vexpress-a15``) +================================================================ + +QEMU models two variants of the Arm Versatile Express development +board family: + +- ``vexpress-a9`` models the combination of the Versatile Express + motherboard and the CoreTile Express A9x4 daughterboard +- ``vexpress-a15`` models the combination of the Versatile Express + motherboard and the CoreTile Express A15x2 daughterboard + +Note that as this hardware does not have PCI, IDE or SCSI, +the only available storage option is emulated SD card. + +Implemented devices: + +- PL041 audio +- PL181 SD controller +- PL050 keyboard and mouse +- PL011 UARTs +- SP804 timers +- I2C controller +- PL031 RTC +- PL111 LCD display controller +- Flash memory +- LAN9118 ethernet + +Unimplemented devices: + +- SP810 system control block +- PCI-express +- USB controller (Philips ISP1761) +- Local DAP ROM +- CoreSight interfaces +- PL301 AXI interconnect +- SCC +- System counter +- HDLCD controller (``vexpress-a15``) +- SP805 watchdog +- PL341 dynamic memory controller +- DMA330 DMA controller +- PL354 static memory controller +- BP147 TrustZone Protection Controller +- TrustZone Address Space Controller + +Other differences between the hardware and the QEMU model: + +- QEMU will default to creating one CPU unless you pass a different + ``-smp`` argument +- QEMU allows the amount of RAM provided to be specified with the + ``-m`` argument +- QEMU defaults to providing a CPU which does not provide either + TrustZone or the Virtualization Extensions: if you want these you + must enable them with ``-machine secure=on`` and ``-machine + virtualization=on`` +- QEMU provides 4 virtio-mmio virtio transports; these start at + address ``0x10013000`` for ``vexpress-a9`` and at ``0x1c130000`` for + ``vexpress-a15``, and have IRQs from 40 upwards. If a dtb is + provided on the command line then QEMU will edit it to include + suitable entries describing these transports for the guest. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/integratorcp arm/realview arm/versatile + arm/vexpress arm/musicpal arm/nseries arm/orangepi diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/vexpress.c +F: docs/system/arm/vexpress.rst Versatile PB M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Add basic documentation of the MPS2 board models. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-5-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 29 +++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 31 insertions(+) create mode 100644 docs/system/arm/mps2.rst diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/mps2.rst @@ -XXX,XX +XXX,XX @@ +Arm MPS2 boards (``mps2-an385``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``) +================================================================================ + +These board models all use Arm M-profile CPUs. + +The Arm MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger +FPGA but is otherwise the same as the 2). Since the CPU itself +and most of the devices are in the FPGA, the details of the board +as seen by the guest depend significantly on the FPGA image. + +QEMU models the following FPGA images: + +``mps2-an385`` + Cortex-M3 as documented in ARM Application Note AN385 +``mps2-an511`` + Cortex-M3 'DesignStart' as documented in AN511 +``mps2-an505`` + Cortex-M33 as documented in ARM Application Note AN505 +``mps2-an521`` + Dual Cortex-M33 as documented in Application Note AN521 + +Differences between QEMU and real hardware: + +- AN385 remapping of low 16K of memory to either ZBT SSRAM1 or to + block RAM is unimplemented (QEMU always maps this to ZBT SSRAM1, as + if zbt_boot_ctrl is always zero) +- QEMU provides a LAN9118 ethernet rather than LAN9220; the only guest + visible difference is that the LAN9118 doesn't support checksum + offloading diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running :maxdepth: 1 arm/integratorcp + arm/mps2 arm/realview arm/versatile arm/vexpress diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/armsse-cpuid.c F: include/hw/misc/armsse-cpuid.h F: hw/misc/armsse-mhu.c F: include/hw/misc/armsse-mhu.h +F: docs/system/arm/mps2.rst Musca M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Provide a minimal documentation of the Musca boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-6-peter.maydell@linaro.org --- docs/system/arm/musca.rst | 31 +++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 33 insertions(+) create mode 100644 docs/system/arm/musca.rst diff --git a/docs/system/arm/musca.rst b/docs/system/arm/musca.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/musca.rst @@ -XXX,XX +XXX,XX @@ +Arm Musca boards (``musca-a``, ``musca-b1``) +============================================ + +The Arm Musca development boards are a reference implementation +of a system using the SSE-200 Subsystem for Embedded. They are +dual Cortex-M33 systems. + +QEMU provides models of the A and B1 variants of this board. + +Unimplemented devices: + +- SPI +- |I2C| +- |I2S| +- PWM +- QSPI +- Timer +- SCC +- GPIO +- eFlash +- MHU +- PVT +- SDIO +- CryptoCell + +Note that (like the real hardware) the Musca-A machine is +asymmetric: CPU 0 does not have the FPU or DSP extensions, +but CPU 1 does. Also like the real hardware, the memory maps +for the A and B1 variants differ significantly, so guest +software must be built for the right variant. + diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/integratorcp arm/mps2 + arm/musca arm/realview arm/versatile arm/vexpress diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/musca.c +F: docs/system/arm/musca.rst Musicpal M: Jan Kiszka <jan.kiszka@web.de> -- 2.20.1 In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly to EXCP_SWI, which means that if the guest executes a BKPT insn then QEMU will perform a syscall for it (which syscall depends on what value happens to be in r7...). The correct behaviour is that the guest process should take a SIGTRAP. This code has been like this (more or less) since commit 06c949e62a098f in 2006 which added BKPT in the first place. This is probably because at the time the same code path was used to handle both Linux syscalls and semihosting calls, and (on M profile) BKPT with a suitable magic number is used for semihosting calls. But these days we've moved handling of semihosting out to an entirely different codepath, so we can fix this bug by simply removing this handling of EXCP_BKPT and instead making it deliver a SIGTRAP like EXCP_DEBUG (as we do already on aarch64). Reported-by: <omerg681@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200420212206.12776-2-peter.maydell@linaro.org Fixes: https://bugs.launchpad.net/qemu/+bug/1873898 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/arm/cpu_loop.c | 30 ++++++++---------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) } break; case EXCP_SWI: - case EXCP_BKPT: { env->eabi = 1; /* system call */ - if (trapnr == EXCP_BKPT) { - if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15], env); - n = insn & 0xff; - env->regs[15] += 2; - } else { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u32(insn, env->regs[15], env); - n = (insn & 0xf) | ((insn >> 4) & 0xff0); - env->regs[15] += 4; - } + if (env->thumb) { + /* FIXME - what to do if get_user() fails? */ + get_user_code_u16(insn, env->regs[15] - 2, env); + n = insn & 0xff; } else { - if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15] - 2, env); - n = insn & 0xff; - } else { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u32(insn, env->regs[15] - 4, env); - n = insn & 0xffffff; - } + /* FIXME - what to do if get_user() fails? */ + get_user_code_u32(insn, env->regs[15] - 4, env); + n = insn & 0xffffff; } if (n == ARM_NR_cacheflush) { @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) } break; case EXCP_DEBUG: + case EXCP_BKPT: excp_debug: info.si_signo = TARGET_SIGTRAP; info.si_errno = 0; -- 2.20.1 We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a NOP for QEMU). This is the wrong syscall number, because in the svc-immediate OABI syscall numbers are all offset by the ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002. (This is handled further down in the code with the other Arm-specific syscalls like NR_breakpoint.) When this code was initially added in commit 6f1f31c069b20611 in 2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2) so the value in the comparison took account of the extra 0x900000 offset. In commit fbb4a2e371f2fa7 in 2008, the ARM_SYSCALL_BASE was removed from the definition of ARM_NR_cacheflush and handling for this group of syscalls was added below the point where we subtract ARM_SYSCALL_BASE from the SVC immediate value. However that commit forgot to remove the now-obsolete earlier handling code. Remove the spurious ARM_NR_cacheflush condition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-3-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) n = insn & 0xffffff; } - if (n == ARM_NR_cacheflush) { - /* nop */ - } else if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { + if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { /* linux syscall */ if (env->thumb || n == 0) { n = env->regs[7]; -- 2.20.1 The kernel has different handling for syscalls with invalid numbers that are in the "arm-specific" range 0x9f0000 and up: * 0x9f0000..0x9f07ff return -ENOSYS if not implemented * other out of range syscalls cause a SIGILL (see the kernel's arch/arm/kernel/traps.c:arm_syscall()) Implement this distinction. (Note that our code doesn't look quite like the kernel's, because we have removed the 0x900000 prefix by this point, whereas the kernel retains it in arm_syscall().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200420212206.12776-4-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) env->regs[0] = cpu_get_tls(env); break; default: - qemu_log_mask(LOG_UNIMP, - "qemu: Unsupported ARM syscall: 0x%x\n", - n); - env->regs[0] = -TARGET_ENOSYS; + if (n < 0xf0800) { + /* + * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. + * 0x9f07ff in OABI numbering) are defined + * to return -ENOSYS rather than raising + * SIGILL. Note that we have already + * removed the 0x900000 prefix. + */ + qemu_log_mask(LOG_UNIMP, + "qemu: Unsupported ARM syscall: 0x%x\n", + n); + env->regs[0] = -TARGET_ENOSYS; + } else { + /* Otherwise SIGILL */ + info.si_signo = TARGET_SIGILL; + info.si_errno = 0; + info.si_code = TARGET_ILL_ILLTRP; + info._sifields._sigfault._addr = env->regs[15]; + if (env->thumb) { + info._sifields._sigfault._addr -= 2; + } else { + info._sifields._sigfault._addr -= 4; + } + queue_signal(env, info.si_signo, + QEMU_SI_FAULT, &info); + } break; } } else { -- 2.20.1 Our code to identify syscall numbers has some issues: * for Thumb mode, we never need the immediate value from the insn, but we always read it anyway * bad immediate values in the svc insn should cause a SIGILL, but we were abort()ing instead (via "goto error") We can fix both these things by refactoring the code that identifies the syscall number to more closely follow the kernel COMPAT_OABI code: * for Thumb it is always r7 * for Arm, if the immediate value is 0, then this is an EABI call with the syscall number in r7 * otherwise, we XOR the immediate value with 0x900000 (ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel), which converts valid syscall immediates into the desired value, and puts all invalid immediates in the range 0x100000 or above * then we can just let the existing "value too large, deliver SIGILL" case handle invalid numbers, and drop the 'goto error' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-5-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 143 ++++++++++++++++++++------------------ 1 file changed, 77 insertions(+), 66 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) env->eabi = 1; /* system call */ if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15] - 2, env); - n = insn & 0xff; + /* Thumb is always EABI style with syscall number in r7 */ + n = env->regs[7]; } else { + /* + * Equivalent of kernel CONFIG_OABI_COMPAT: read the + * Arm SVC insn to extract the immediate, which is the + * syscall number in OABI. + */ /* FIXME - what to do if get_user() fails? */ get_user_code_u32(insn, env->regs[15] - 4, env); n = insn & 0xffffff; - } - - if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { - /* linux syscall */ - if (env->thumb || n == 0) { + if (n == 0) { + /* zero immediate: EABI, syscall number in r7 */ n = env->regs[7]; } else { - n -= ARM_SYSCALL_BASE; + /* + * This XOR matches the kernel code: an immediate + * in the valid range (0x900000 .. 0x9fffff) is + * converted into the correct EABI-style syscall + * number; invalid immediates end up as values + * > 0xfffff and are handled below as out-of-range. + */ + n ^= ARM_SYSCALL_BASE; env->eabi = 0; } - if ( n > ARM_NR_BASE) { - switch (n) { - case ARM_NR_cacheflush: - /* nop */ - break; - case ARM_NR_set_tls: - cpu_set_tls(env, env->regs[0]); - env->regs[0] = 0; - break; - case ARM_NR_breakpoint: - env->regs[15] -= env->thumb ? 2 : 4; - goto excp_debug; - case ARM_NR_get_tls: - env->regs[0] = cpu_get_tls(env); - break; - default: - if (n < 0xf0800) { - /* - * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. - * 0x9f07ff in OABI numbering) are defined - * to return -ENOSYS rather than raising - * SIGILL. Note that we have already - * removed the 0x900000 prefix. - */ - qemu_log_mask(LOG_UNIMP, - "qemu: Unsupported ARM syscall: 0x%x\n", - n); - env->regs[0] = -TARGET_ENOSYS; + } + + if (n > ARM_NR_BASE) { + switch (n) { + case ARM_NR_cacheflush: + /* nop */ + break; + case ARM_NR_set_tls: + cpu_set_tls(env, env->regs[0]); + env->regs[0] = 0; + break; + case ARM_NR_breakpoint: + env->regs[15] -= env->thumb ? 2 : 4; + goto excp_debug; + case ARM_NR_get_tls: + env->regs[0] = cpu_get_tls(env); + break; + default: + if (n < 0xf0800) { + /* + * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. + * 0x9f07ff in OABI numbering) are defined + * to return -ENOSYS rather than raising + * SIGILL. Note that we have already + * removed the 0x900000 prefix. + */ + qemu_log_mask(LOG_UNIMP, + "qemu: Unsupported ARM syscall: 0x%x\n", + n); + env->regs[0] = -TARGET_ENOSYS; + } else { + /* + * Otherwise SIGILL. This includes any SWI with + * immediate not originally 0x9fxxxx, because + * of the earlier XOR. + */ + info.si_signo = TARGET_SIGILL; + info.si_errno = 0; + info.si_code = TARGET_ILL_ILLTRP; + info._sifields._sigfault._addr = env->regs[15]; + if (env->thumb) { + info._sifields._sigfault._addr -= 2; } else { - /* Otherwise SIGILL */ - info.si_signo = TARGET_SIGILL; - info.si_errno = 0; - info.si_code = TARGET_ILL_ILLTRP; - info._sifields._sigfault._addr = env->regs[15]; - if (env->thumb) { - info._sifields._sigfault._addr -= 2; - } else { - info._sifields._sigfault._addr -= 4; - } - queue_signal(env, info.si_signo, - QEMU_SI_FAULT, &info); + info._sifields._sigfault._addr -= 4; } - break; - } - } else { - ret = do_syscall(env, - n, - env->regs[0], - env->regs[1], - env->regs[2], - env->regs[3], - env->regs[4], - env->regs[5], - 0, 0); - if (ret == -TARGET_ERESTARTSYS) { - env->regs[15] -= env->thumb ? 2 : 4; - } else if (ret != -TARGET_QEMU_ESIGRETURN) { - env->regs[0] = ret; + queue_signal(env, info.si_signo, + QEMU_SI_FAULT, &info); } + break; } } else { - goto error; + ret = do_syscall(env, + n, + env->regs[0], + env->regs[1], + env->regs[2], + env->regs[3], + env->regs[4], + env->regs[5], + 0, 0); + if (ret == -TARGET_ERESTARTSYS) { + env->regs[15] -= env->thumb ? 2 : 4; + } else if (ret != -TARGET_QEMU_ESIGRETURN) { + env->regs[0] = ret; + } } } break; -- 2.20.1 The GEN_NEON_INTEGER_OP macro is no longer used; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/arm/translate.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_rsb(int size, TCGv_i32 t0, TCGv_i32 t1) default: return 1; \ }} while (0) -#define GEN_NEON_INTEGER_OP(name) do { \ - switch ((size << 1) | u) { \ - case 0: \ - gen_helper_neon_##name##_s8(tmp, tmp, tmp2); \ - break; \ - case 1: \ - gen_helper_neon_##name##_u8(tmp, tmp, tmp2); \ - break; \ - case 2: \ - gen_helper_neon_##name##_s16(tmp, tmp, tmp2); \ - break; \ - case 3: \ - gen_helper_neon_##name##_u16(tmp, tmp, tmp2); \ - break; \ - case 4: \ - gen_helper_neon_##name##_s32(tmp, tmp, tmp2); \ - break; \ - case 5: \ - gen_helper_neon_##name##_u32(tmp, tmp, tmp2); \ - break; \ - default: return 1; \ - }} while (0) - static TCGv_i32 neon_load_scratch(int scratch) { TCGv_i32 tmp = tcg_temp_new_i32(); -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> In preparation for a full implementation, move i.MX watchdog driver from hw/misc to hw/watchdog. While at it, add the watchdog files to MAINTAINERS. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6.h | 2 +- include/hw/arm/fsl-imx6ul.h | 2 +- include/hw/arm/fsl-imx7.h | 2 +- include/hw/{misc/imx2_wdt.h => watchdog/wdt_imx2.h} | 0 hw/{misc/imx2_wdt.c => watchdog/wdt_imx2.c} | 2 +- MAINTAINERS | 2 ++ hw/arm/Kconfig | 3 +++ hw/misc/Makefile.objs | 1 - hw/watchdog/Kconfig | 3 +++ hw/watchdog/Makefile.objs | 1 + 10 files changed, 13 insertions(+), 5 deletions(-) rename include/hw/{misc/imx2_wdt.h => watchdog/wdt_imx2.h} (100%) rename hw/{misc/imx2_wdt.c => watchdog/wdt_imx2.c} (98%) diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6.h +++ b/include/hw/arm/fsl-imx6.h @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a9mpcore.h" #include "hw/misc/imx6_ccm.h" #include "hw/misc/imx6_src.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" #include "hw/timer/imx_epit.h" diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" #include "hw/misc/imx6_src.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" diff --git a/include/hw/misc/imx2_wdt.h b/include/hw/watchdog/wdt_imx2.h similarity index 100% rename from include/hw/misc/imx2_wdt.h rename to include/hw/watchdog/wdt_imx2.h diff --git a/hw/misc/imx2_wdt.c b/hw/watchdog/wdt_imx2.c similarity index 98% rename from hw/misc/imx2_wdt.c rename to hw/watchdog/wdt_imx2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx2_wdt.c +++ b/hw/watchdog/wdt_imx2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "sysemu/watchdog.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ #define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: hw/arm/fsl-imx25.c F: hw/arm/imx25_pdk.c F: hw/misc/imx25_ccm.c +F: hw/watchdog/wdt_imx2.c F: include/hw/arm/fsl-imx25.h F: include/hw/misc/imx25_ccm.h +F: include/hw/watchdog/wdt_imx2.h i.MX31 (kzm) M: Peter Chubb <peter.chubb@nicta.com.au> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6 select IMX_FEC select IMX_I2C select IMX_USBPHY + select WDT_IMX2 select SDHCI config ASPEED_SOC @@ -XXX,XX +XXX,XX @@ config FSL_IMX7 select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select PCI_EXPRESS_DESIGNWARE select SDHCI select UNIMP @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select SDHCI select UNIMP diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx6_ccm.o common-obj-$(CONFIG_IMX) += imx6ul_ccm.o obj-$(CONFIG_IMX) += imx6_src.o common-obj-$(CONFIG_IMX) += imx7_ccm.o -common-obj-$(CONFIG_IMX) += imx2_wdt.o common-obj-$(CONFIG_IMX) += imx7_snvs.o common-obj-$(CONFIG_IMX) += imx7_gpr.o common-obj-$(CONFIG_IMX) += imx_rngc.o diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Kconfig +++ b/hw/watchdog/Kconfig @@ -XXX,XX +XXX,XX @@ config WDT_IB700 config WDT_DIAG288 bool + +config WDT_IMX2 + bool diff --git a/hw/watchdog/Makefile.objs b/hw/watchdog/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Makefile.objs +++ b/hw/watchdog/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_WDT_IB6300ESB) += wdt_i6300esb.o common-obj-$(CONFIG_WDT_IB700) += wdt_ib700.o common-obj-$(CONFIG_WDT_DIAG288) += wdt_diag288.o common-obj-$(CONFIG_ASPEED_SOC) += wdt_aspeed.o +common-obj-$(CONFIG_WDT_IMX2) += wdt_imx2.o -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Implement full support for the watchdog in i.MX systems. Pretimeout support is optional because the watchdog hardware on i.MX31 does not support pretimeouts. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-3-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/wdt_imx2.h | 61 ++++++++- hw/watchdog/wdt_imx2.c | 239 +++++++++++++++++++++++++++++++-- 2 files changed, 285 insertions(+), 15 deletions(-) diff --git a/include/hw/watchdog/wdt_imx2.h b/include/hw/watchdog/wdt_imx2.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/wdt_imx2.h +++ b/include/hw/watchdog/wdt_imx2.h @@ -XXX,XX +XXX,XX @@ #ifndef IMX2_WDT_H #define IMX2_WDT_H +#include "qemu/bitops.h" #include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/ptimer.h" #define TYPE_IMX2_WDT "imx2.wdt" #define IMX2_WDT(obj) OBJECT_CHECK(IMX2WdtState, (obj), TYPE_IMX2_WDT) enum IMX2WdtRegisters { - IMX2_WDT_WCR = 0x0000, - IMX2_WDT_REG_NUM = 0x0008 / sizeof(uint16_t) + 1, + IMX2_WDT_WCR = 0x0000, /* Control Register */ + IMX2_WDT_WSR = 0x0002, /* Service Register */ + IMX2_WDT_WRSR = 0x0004, /* Reset Status Register */ + IMX2_WDT_WICR = 0x0006, /* Interrupt Control Register */ + IMX2_WDT_WMCR = 0x0008, /* Misc Register */ }; +#define IMX2_WDT_MMIO_SIZE 0x000a + +/* Control Register definitions */ +#define IMX2_WDT_WCR_WT (0xFF << 8) /* Watchdog Timeout Field */ +#define IMX2_WDT_WCR_WDW BIT(7) /* WDOG Disable for Wait */ +#define IMX2_WDT_WCR_WDA BIT(5) /* WDOG Assertion */ +#define IMX2_WDT_WCR_SRS BIT(4) /* Software Reset Signal */ +#define IMX2_WDT_WCR_WDT BIT(3) /* WDOG Timeout Assertion */ +#define IMX2_WDT_WCR_WDE BIT(2) /* Watchdog Enable */ +#define IMX2_WDT_WCR_WDBG BIT(1) /* Watchdog Debug Enable */ +#define IMX2_WDT_WCR_WDZST BIT(0) /* Watchdog Timer Suspend */ + +#define IMX2_WDT_WCR_LOCK_MASK (IMX2_WDT_WCR_WDZST | IMX2_WDT_WCR_WDBG \ + | IMX2_WDT_WCR_WDW) + +/* Service Register definitions */ +#define IMX2_WDT_SEQ1 0x5555 /* service sequence 1 */ +#define IMX2_WDT_SEQ2 0xAAAA /* service sequence 2 */ + +/* Reset Status Register definitions */ +#define IMX2_WDT_WRSR_TOUT BIT(1) /* Reset due to Timeout */ +#define IMX2_WDT_WRSR_SFTW BIT(0) /* Reset due to software reset */ + +/* Interrupt Control Register definitions */ +#define IMX2_WDT_WICR_WIE BIT(15) /* Interrupt Enable */ +#define IMX2_WDT_WICR_WTIS BIT(14) /* Interrupt Status */ +#define IMX2_WDT_WICR_WICT 0xff /* Interrupt Timeout */ +#define IMX2_WDT_WICR_WICT_DEF 0x04 /* Default interrupt timeout (2s) */ + +#define IMX2_WDT_WICR_LOCK_MASK (IMX2_WDT_WICR_WIE | IMX2_WDT_WICR_WICT) + +/* Misc Control Register definitions */ +#define IMX2_WDT_WMCR_PDE BIT(0) /* Power-Down Enable */ typedef struct IMX2WdtState { /* <private> */ SysBusDevice parent_obj; + /*< public >*/ MemoryRegion mmio; + qemu_irq irq; + + struct ptimer_state *timer; + struct ptimer_state *itimer; + + bool pretimeout_support; + bool wicr_locked; + + uint16_t wcr; + uint16_t wsr; + uint16_t wrsr; + uint16_t wicr; + uint16_t wmcr; + + bool wcr_locked; /* affects WDZST, WDBG, and WDW */ + bool wcr_wde_locked; /* affects WDE */ + bool wcr_wdt_locked; /* affects WDT (never cleared) */ } IMX2WdtState; #endif /* IMX2_WDT_H */ diff --git a/hw/watchdog/wdt_imx2.c b/hw/watchdog/wdt_imx2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_imx2.c +++ b/hw/watchdog/wdt_imx2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/bitops.h" #include "qemu/module.h" #include "sysemu/watchdog.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" #include "hw/watchdog/wdt_imx2.h" -#define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ -#define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ - -static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, - unsigned int size) +static void imx2_wdt_interrupt(void *opaque) { + IMX2WdtState *s = IMX2_WDT(opaque); + + s->wicr |= IMX2_WDT_WICR_WTIS; + qemu_set_irq(s->irq, 1); +} + +static void imx2_wdt_expired(void *opaque) +{ + IMX2WdtState *s = IMX2_WDT(opaque); + + s->wrsr = IMX2_WDT_WRSR_TOUT; + + /* Perform watchdog action if watchdog is enabled */ + if (s->wcr & IMX2_WDT_WCR_WDE) { + s->wrsr = IMX2_WDT_WRSR_TOUT; + watchdog_perform_action(); + } +} + +static void imx2_wdt_reset(DeviceState *dev) +{ + IMX2WdtState *s = IMX2_WDT(dev); + + ptimer_transaction_begin(s->timer); + ptimer_stop(s->timer); + ptimer_transaction_commit(s->timer); + + if (s->pretimeout_support) { + ptimer_transaction_begin(s->itimer); + ptimer_stop(s->itimer); + ptimer_transaction_commit(s->itimer); + } + + s->wicr_locked = false; + s->wcr_locked = false; + s->wcr_wde_locked = false; + + s->wcr = IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS; + s->wsr = 0; + s->wrsr &= ~(IMX2_WDT_WRSR_TOUT | IMX2_WDT_WRSR_SFTW); + s->wicr = IMX2_WDT_WICR_WICT_DEF; + s->wmcr = IMX2_WDT_WMCR_PDE; +} + +static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, unsigned int size) +{ + IMX2WdtState *s = IMX2_WDT(opaque); + + switch (addr) { + case IMX2_WDT_WCR: + return s->wcr; + case IMX2_WDT_WSR: + return s->wsr; + case IMX2_WDT_WRSR: + return s->wrsr; + case IMX2_WDT_WICR: + return s->wicr; + case IMX2_WDT_WMCR: + return s->wmcr; + } return 0; } +static void imx_wdt2_update_itimer(IMX2WdtState *s, bool start) +{ + bool running = (s->wcr & IMX2_WDT_WCR_WDE) && (s->wcr & IMX2_WDT_WCR_WT); + bool enabled = s->wicr & IMX2_WDT_WICR_WIE; + + ptimer_transaction_begin(s->itimer); + if (start || !enabled) { + ptimer_stop(s->itimer); + } + if (running && enabled) { + int count = ptimer_get_count(s->timer); + int pretimeout = s->wicr & IMX2_WDT_WICR_WICT; + + /* + * Only (re-)start pretimeout timer if its counter value is larger + * than 0. Otherwise it will fire right away and we'll get an + * interrupt loop. + */ + if (count > pretimeout) { + ptimer_set_count(s->itimer, count - pretimeout); + if (start) { + ptimer_run(s->itimer, 1); + } + } + } + ptimer_transaction_commit(s->itimer); +} + +static void imx_wdt2_update_timer(IMX2WdtState *s, bool start) +{ + ptimer_transaction_begin(s->timer); + if (start) { + ptimer_stop(s->timer); + } + if ((s->wcr & IMX2_WDT_WCR_WDE) && (s->wcr & IMX2_WDT_WCR_WT)) { + int count = (s->wcr & IMX2_WDT_WCR_WT) >> 8; + + /* A value of 0 reflects one period (0.5s). */ + ptimer_set_count(s->timer, count + 1); + if (start) { + ptimer_run(s->timer, 1); + } + } + ptimer_transaction_commit(s->timer); + if (s->pretimeout_support) { + imx_wdt2_update_itimer(s, start); + } +} + static void imx2_wdt_write(void *opaque, hwaddr addr, uint64_t value, unsigned int size) { - if (addr == IMX2_WDT_WCR && - (~value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS))) { - watchdog_perform_action(); + IMX2WdtState *s = IMX2_WDT(opaque); + + switch (addr) { + case IMX2_WDT_WCR: + if (s->wcr_locked) { + value &= ~IMX2_WDT_WCR_LOCK_MASK; + value |= (s->wicr & IMX2_WDT_WCR_LOCK_MASK); + } + s->wcr_locked = true; + if (s->wcr_wde_locked) { + value &= ~IMX2_WDT_WCR_WDE; + value |= (s->wicr & ~IMX2_WDT_WCR_WDE); + } else if (value & IMX2_WDT_WCR_WDE) { + s->wcr_wde_locked = true; + } + if (s->wcr_wdt_locked) { + value &= ~IMX2_WDT_WCR_WDT; + value |= (s->wicr & ~IMX2_WDT_WCR_WDT); + } else if (value & IMX2_WDT_WCR_WDT) { + s->wcr_wdt_locked = true; + } + + s->wcr = value; + if (!(value & IMX2_WDT_WCR_SRS)) { + s->wrsr = IMX2_WDT_WRSR_SFTW; + } + if (!(value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS)) || + (!(value & IMX2_WDT_WCR_WT) && (value & IMX2_WDT_WCR_WDE))) { + watchdog_perform_action(); + } + s->wcr |= IMX2_WDT_WCR_SRS; + imx_wdt2_update_timer(s, true); + break; + case IMX2_WDT_WSR: + if (s->wsr == IMX2_WDT_SEQ1 && value == IMX2_WDT_SEQ2) { + imx_wdt2_update_timer(s, false); + } + s->wsr = value; + break; + case IMX2_WDT_WRSR: + break; + case IMX2_WDT_WICR: + if (!s->pretimeout_support) { + return; + } + value &= IMX2_WDT_WICR_LOCK_MASK | IMX2_WDT_WICR_WTIS; + if (s->wicr_locked) { + value &= IMX2_WDT_WICR_WTIS; + value |= (s->wicr & IMX2_WDT_WICR_LOCK_MASK); + } + s->wicr = value | (s->wicr & IMX2_WDT_WICR_WTIS); + if (value & IMX2_WDT_WICR_WTIS) { + s->wicr &= ~IMX2_WDT_WICR_WTIS; + qemu_set_irq(s->irq, 0); + } + imx_wdt2_update_itimer(s, true); + s->wicr_locked = true; + break; + case IMX2_WDT_WMCR: + s->wmcr = value & IMX2_WDT_WMCR_PDE; + break; } } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps imx2_wdt_ops = { * real device but in practice there is no reason for a guest * to access this device unaligned. */ - .min_access_size = 4, - .max_access_size = 4, + .min_access_size = 2, + .max_access_size = 2, .unaligned = false, }, }; +static const VMStateDescription vmstate_imx2_wdt = { + .name = "imx2.wdt", + .fields = (VMStateField[]) { + VMSTATE_PTIMER(timer, IMX2WdtState), + VMSTATE_PTIMER(itimer, IMX2WdtState), + VMSTATE_BOOL(wicr_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_wde_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_wdt_locked, IMX2WdtState), + VMSTATE_UINT16(wcr, IMX2WdtState), + VMSTATE_UINT16(wsr, IMX2WdtState), + VMSTATE_UINT16(wrsr, IMX2WdtState), + VMSTATE_UINT16(wmcr, IMX2WdtState), + VMSTATE_UINT16(wicr, IMX2WdtState), + VMSTATE_END_OF_LIST() + } +}; + static void imx2_wdt_realize(DeviceState *dev, Error **errp) { IMX2WdtState *s = IMX2_WDT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); memory_region_init_io(&s->mmio, OBJECT(dev), &imx2_wdt_ops, s, - TYPE_IMX2_WDT".mmio", - IMX2_WDT_REG_NUM * sizeof(uint16_t)); - sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); + TYPE_IMX2_WDT, + IMX2_WDT_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); + + s->timer = ptimer_init(imx2_wdt_expired, s, + PTIMER_POLICY_NO_IMMEDIATE_TRIGGER | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); + ptimer_transaction_begin(s->timer); + ptimer_set_freq(s->timer, 2); + ptimer_set_limit(s->timer, 0xff, 1); + ptimer_transaction_commit(s->timer); + if (s->pretimeout_support) { + s->itimer = ptimer_init(imx2_wdt_interrupt, s, + PTIMER_POLICY_NO_IMMEDIATE_TRIGGER | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); + ptimer_transaction_begin(s->itimer); + ptimer_set_freq(s->itimer, 2); + ptimer_set_limit(s->itimer, 0xff, 1); + ptimer_transaction_commit(s->itimer); + } } +static Property imx2_wdt_properties[] = { + DEFINE_PROP_BOOL("pretimeout-support", IMX2WdtState, pretimeout_support, + false), +}; + static void imx2_wdt_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + device_class_set_props(dc, imx2_wdt_properties); dc->realize = imx2_wdt_realize; + dc->reset = imx2_wdt_reset; + dc->vmsd = &vmstate_imx2_wdt; + dc->desc = "i.MX watchdog timer"; set_bit(DEVICE_CATEGORY_MISC, dc->categories); } -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this commit, the watchdog on imx25-pdk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx25.h | 5 +++++ hw/arm/fsl-imx25.c | 10 ++++++++++ hw/arm/Kconfig | 1 + 3 files changed, 16 insertions(+) diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ #include "hw/gpio/imx_gpio.h" #include "hw/sd/sdhci.h" #include "hw/usb/chipidea.h" +#include "hw/watchdog/wdt_imx2.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { IMXGPIOState gpio[FSL_IMX25_NUM_GPIOS]; SDHCIState esdhc[FSL_IMX25_NUM_ESDHCS]; ChipideaState usb[FSL_IMX25_NUM_USBS]; + IMX2WdtState wdt; MemoryRegion rom[2]; MemoryRegion iram; MemoryRegion iram_alias; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO1_SIZE 0x4000 #define FSL_IMX25_GPIO2_ADDR 0x53FD0000 #define FSL_IMX25_GPIO2_SIZE 0x4000 +#define FSL_IMX25_WDT_ADDR 0x53FDC000 +#define FSL_IMX25_WDT_SIZE 0x4000 #define FSL_IMX25_USB1_ADDR 0x53FF4000 #define FSL_IMX25_USB1_SIZE 0x0200 #define FSL_IMX25_USB2_ADDR 0x53FF4400 @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_ESDHC2_IRQ 8 #define FSL_IMX25_USB1_IRQ 37 #define FSL_IMX25_USB2_IRQ 35 +#define FSL_IMX25_WDT_IRQ 55 #endif /* FSL_IMX25_H */ diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx25.c +++ b/hw/arm/fsl-imx25.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_init(Object *obj) TYPE_CHIPIDEA); } + sysbus_init_child_obj(obj, "wdt", &s->wdt, sizeof(s->wdt), TYPE_IMX2_WDT); } static void fsl_imx25_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) usb_table[i].irq)); } + /* Watchdog */ + object_property_set_bool(OBJECT(&s->wdt), true, "pretimeout-support", + &error_abort); + object_property_set_bool(OBJECT(&s->wdt), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX25_WDT_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + FSL_IMX25_WDT_IRQ)); + /* initialize 2 x 16 KB ROM */ memory_region_init_rom(&s->rom[0], OBJECT(dev), "imx25.rom0", FSL_IMX25_ROM0_SIZE, &err); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX25 select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select DS1338 config FSL_IMX31 -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this patch, the watchdog on i.MX31 emulations is fully operational. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-5-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx31.h | 4 ++++ hw/arm/fsl-imx31.c | 6 ++++++ hw/arm/Kconfig | 1 + 3 files changed, 11 insertions(+) diff --git a/include/hw/arm/fsl-imx31.h b/include/hw/arm/fsl-imx31.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx31.h +++ b/include/hw/arm/fsl-imx31.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/imx_epit.h" #include "hw/i2c/imx_i2c.h" #include "hw/gpio/imx_gpio.h" +#include "hw/watchdog/wdt_imx2.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX31State { IMXEPITState epit[FSL_IMX31_NUM_EPITS]; IMXI2CState i2c[FSL_IMX31_NUM_I2CS]; IMXGPIOState gpio[FSL_IMX31_NUM_GPIOS]; + IMX2WdtState wdt; MemoryRegion secure_rom; MemoryRegion rom; MemoryRegion iram; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX31State { #define FSL_IMX31_GPIO1_SIZE 0x4000 #define FSL_IMX31_GPIO2_ADDR 0x53FD0000 #define FSL_IMX31_GPIO2_SIZE 0x4000 +#define FSL_IMX31_WDT_ADDR 0x53FDC000 +#define FSL_IMX31_WDT_SIZE 0x4000 #define FSL_IMX31_AVIC_ADDR 0x68000000 #define FSL_IMX31_AVIC_SIZE 0x100 #define FSL_IMX31_SDRAM0_ADDR 0x80000000 diff --git a/hw/arm/fsl-imx31.c b/hw/arm/fsl-imx31.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx31.c +++ b/hw/arm/fsl-imx31.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx31_init(Object *obj) sysbus_init_child_obj(obj, "gpio[*]", &s->gpio[i], sizeof(s->gpio[i]), TYPE_IMX_GPIO); } + + sysbus_init_child_obj(obj, "wdt", &s->wdt, sizeof(s->wdt), TYPE_IMX2_WDT); } static void fsl_imx31_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx31_realize(DeviceState *dev, Error **errp) gpio_table[i].irq)); } + /* Watchdog */ + object_property_set_bool(OBJECT(&s->wdt), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX31_WDT_ADDR); + /* On a real system, the first 16k is a `secure boot rom' */ memory_region_init_rom(&s->secure_rom, OBJECT(dev), "imx31.secure_rom", FSL_IMX31_SECURE_ROM_SIZE, &err); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX31 select SERIAL select IMX select IMX_I2C + select WDT_IMX2 select LAN9118 config FSL_IMX6 -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this patch applied, the watchdog in the sabrelite emulation is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-6-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx6.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6.c +++ b/hw/arm/fsl-imx6.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp) FSL_IMX6_WDOG1_ADDR, FSL_IMX6_WDOG2_ADDR, }; + static const int FSL_IMX6_WDOGn_IRQ[FSL_IMX6_NUM_WDTS] = { + FSL_IMX6_WDOG1_IRQ, + FSL_IMX6_WDOG2_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a9mpcore), + FSL_IMX6_WDOGn_IRQ[i])); } /* ROM memory */ -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this commit, the watchdog on mcimx6ul-evk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-7-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx6ul.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { + FSL_IMX6UL_WDOG1_IRQ, + FSL_IMX6UL_WDOG2_IRQ, + FSL_IMX6UL_WDOG3_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6UL_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_WDOGn_IRQ[i])); } /* -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Instantiating PWM, CAN, CAAM, and OCOTP devices is necessary to avoid crashes when booting mainline Linux. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-8-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 16 ++++++++++++++++ hw/arm/fsl-imx7.c | 24 ++++++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, FSL_IMX7_IOMUXCn_SIZE = 0x1000, + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + FSL_IMX7_ANALOG_ADDR = 0x30360000, FSL_IMX7_SNVS_ADDR = 0x30370000, FSL_IMX7_CCM_ADDR = 0x30380000, @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_ADC2_ADDR = 0x30620000, FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, FSL_IMX7_PCIE_PHY_SIZE = 0x10000, FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_CAAM_ADDR = 0x30900000, + FSL_IMX7_CAAM_SIZE = 0x40000, + + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, FSL_IMX7_I2C2_ADDR = 0x30A30000, FSL_IMX7_I2C3_ADDR = 0x30A40000, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("sdma", FSL_IMX7_SDMA_ADDR, FSL_IMX7_SDMA_SIZE); + /* + * CAAM + */ + create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); + + /* + * PWM + */ + create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + + /* + * CAN + */ + create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); + create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + + /* + * OCOTP + */ + create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, + FSL_IMX7_OCOTP_SIZE); object_property_set_bool(OBJECT(&s->gpr), true, "realized", &error_abort); -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> i.MX7 supports watchdog pretimeout interupts. With this commit, the watchdog in mcimx7d-sabre is fully operational, including pretimeout support. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-9-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 5 +++++ hw/arm/fsl-imx7.c | 11 +++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_USB2_IRQ = 42, FSL_IMX7_USB3_IRQ = 40, + FSL_IMX7_WDOG1_IRQ = 78, + FSL_IMX7_WDOG2_IRQ = 79, + FSL_IMX7_WDOG3_IRQ = 10, + FSL_IMX7_WDOG4_IRQ = 109, + FSL_IMX7_PCI_INTA_IRQ = 125, FSL_IMX7_PCI_INTB_IRQ = 124, FSL_IMX7_PCI_INTC_IRQ = 123, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_WDOG3_ADDR, FSL_IMX7_WDOG4_ADDR, }; + static const int FSL_IMX7_WDOGn_IRQ[FSL_IMX7_NUM_WDTS] = { + FSL_IMX7_WDOG1_IRQ, + FSL_IMX7_WDOG2_IRQ, + FSL_IMX7_WDOG3_IRQ, + FSL_IMX7_WDOG4_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX7_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_WDOGn_IRQ[i])); } /* -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" +#include "qemu/log.h" #include "qemu/error-report.h" #include "hw/char/pl011.h" #include "hw/hw.h" @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, /* ??? Voltage control unimplemented. */ return 0; default: - hw_error("integratorcm_read: Unimplemented offset 0x%x\n", - (int)offset); + qemu_log_mask(LOG_UNIMP, + "%s: Unimplemented offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void integratorcm_write(void *opaque, hwaddr offset, /* ??? Voltage control unimplemented. */ break; default: - hw_error("integratorcm_write: Unimplemented offset 0x%x\n", - (int)offset); + qemu_log_mask(LOG_UNIMP, + "%s: Unimplemented offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t icp_pic_read(void *opaque, hwaddr offset, case 5: /* INT_SOFTCLR */ case 11: /* FRQ_ENABLECLR */ default: - printf ("icp_pic_read: Bad register offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void icp_pic_write(void *opaque, hwaddr offset, case 8: /* FRQ_STATUS */ case 9: /* FRQ_RAWSTAT */ default: - printf ("icp_pic_write: Bad register offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return; } icp_pic_update(s); @@ -XXX,XX +XXX,XX @@ static uint64_t icp_control_read(void *opaque, hwaddr offset, case 3: /* CP_DECODE */ return 0x11; default: - hw_error("icp_control_read: Bad offset %x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void icp_control_write(void *opaque, hwaddr offset, /* Nothing interesting implemented yet. */ break; default: - hw_error("icp_control_write: Bad offset %x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx_gpio.c | 7 ++++--- hw/display/pxa2xx_lcd.c | 8 +++++--- hw/dma/pxa2xx_dma.c | 14 +++++++++----- 3 files changed, 18 insertions(+), 11 deletions(-) diff --git a/hw/arm/pxa2xx_gpio.c b/hw/arm/pxa2xx_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_gpio.c +++ b/hw/arm/pxa2xx_gpio.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "cpu.h" -#include "hw/hw.h" #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset, return s->status[bank]; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_gpio_write(void *opaque, hwaddr offset, break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } diff --git a/hw/display/pxa2xx_lcd.c b/hw/display/pxa2xx_lcd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/pxa2xx_lcd.c +++ b/hw/display/pxa2xx_lcd.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "migration/vmstate.h" #include "ui/console.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_lcdc_read(void *opaque, hwaddr offset, default: fail: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_lcdc_write(void *opaque, hwaddr offset, default: fail: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } diff --git a/hw/dma/pxa2xx_dma.c b/hw/dma/pxa2xx_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/pxa2xx_dma.c +++ b/hw/dma/pxa2xx_dma.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/log.h" #include "hw/hw.h" #include "hw/irq.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_dma_read(void *opaque, hwaddr offset, unsigned int channel; if (size != 4) { - hw_error("%s: Bad access width\n", __func__); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad access width %u\n", + __func__, size); return 5; } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_dma_read(void *opaque, hwaddr offset, return s->chan[channel].cmd; } } - - hw_error("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 7; } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_dma_write(void *opaque, hwaddr offset, unsigned int channel; if (size != 4) { - hw_error("%s: Bad access width\n", __func__); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad access width %u\n", + __func__, size); return; } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_dma_write(void *opaque, hwaddr offset, break; } fail: - hw_error("%s: Bad offset " TARGET_FMT_plx "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/xilinx_uartlite.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/char/xilinx_uartlite.c b/hw/char/xilinx_uartlite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/xilinx_uartlite.c +++ b/hw/char/xilinx_uartlite.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ uart_write(void *opaque, hwaddr addr, switch (addr) { case R_STATUS: - hw_error("write to UART STATUS?\n"); + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to UART STATUS\n", + __func__); break; case R_CTRL: -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Per the datasheet "Exynos 4412 RISC Microprocessor Rev 1.00" Chapter 25 "Multi Core Timer (MCT)" figure 1 and table 4, the default value on the APB bus is 0. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/log.h" -#include "hw/hw.h" #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/timer.h" @@ -XXX,XX +XXX,XX @@ #include "hw/ptimer.h" #include "hw/arm/exynos4210.h" -#include "hw/hw.h" #include "hw/irq.h" //#define DEBUG_MCT @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_mct_read(void *opaque, hwaddr offset, int index; int shift; uint64_t count; - uint32_t value; + uint32_t value = 0; int lt_i; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_mct_read(void *opaque, hwaddr offset, break; default: - hw_error("exynos4210.mct: bad read offset " - TARGET_FMT_plx "\n", offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } return value; @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, break; default: - hw_error("exynos4210.mct: bad write offset " - TARGET_FMT_plx "\n", offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } } -- 2.20.1 From: Geert Uytterhoeven <geert+renesas@glider.be> Add a definition for the number of GPIO lines controlled by a PL061 instance, and use it instead of the hardcoded magic value 8. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200519085143.1376-1-geert+renesas@glider.be Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/pl061.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static const uint8_t pl061_id_luminary[12] = #define TYPE_PL061 "pl061" #define PL061(obj) OBJECT_CHECK(PL061State, (obj), TYPE_PL061) +#define N_GPIOS 8 + typedef struct PL061State { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct PL061State { uint32_t cr; uint32_t amsel; qemu_irq irq; - qemu_irq out[8]; + qemu_irq out[N_GPIOS]; const unsigned char *id; uint32_t rsvd_start; /* reserved area: [rsvd_start, 0xfcc] */ } PL061State; @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) changed = s->old_out_data ^ out; if (changed) { s->old_out_data = out; - for (i = 0; i < 8; i++) { + for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { DPRINTF("Set output %d = %d\n", i, (out & mask) != 0); @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) changed = (s->old_in_data ^ s->data) & ~s->dir; if (changed) { s->old_in_data = s->data; - for (i = 0; i < 8; i++) { + for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { DPRINTF("Changed input %d = %d\n", i, (s->data & mask) != 0); @@ -XXX,XX +XXX,XX @@ static void pl061_init(Object *obj) memory_region_init_io(&s->iomem, obj, &pl061_ops, s, "pl061", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); - qdev_init_gpio_in(dev, pl061_set_irq, 8); - qdev_init_gpio_out(dev, s->out, 8); + qdev_init_gpio_in(dev, pl061_set_irq, N_GPIOS); + qdev_init_gpio_out(dev, s->out, N_GPIOS); } static void pl061_class_init(ObjectClass *klass, void *data) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The 8-byte store for the end a !is_q operation can be merged with the other stores. Use a no-op vector move to trigger the expand_clr portion of tcg_gen_gvec_mov. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200519212453.28494-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void clear_vec_high(DisasContext *s, bool is_q, int rd) unsigned ofs = fp_reg_offset(s, rd, MO_64); unsigned vsz = vec_full_reg_size(s); - if (!is_q) { - TCGv_i64 tcg_zero = tcg_const_i64(0); - tcg_gen_st_i64(tcg_zero, cpu_env, ofs + 8); - tcg_temp_free_i64(tcg_zero); - } - if (vsz > 16) { - tcg_gen_gvec_dup_imm(MO_64, ofs + 16, vsz - 16, vsz - 16, 0); - } + /* Nop move, with side effect of clearing the tail. */ + tcg_gen_gvec_mov(MO_64, ofs, ofs, is_q ? 16 : 8, vsz); } void write_fp_dreg(DisasContext *s, int reg, TCGv_i64 v) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not explicitly store zero to the NEON high part when we can pass !is_q to clear_vec_high. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200519212453.28494-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 53 +++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size) { /* This always zero-extends and writes to a full 128 bit wide vector */ TCGv_i64 tmplo = tcg_temp_new_i64(); - TCGv_i64 tmphi; + TCGv_i64 tmphi = NULL; if (size < 4) { MemOp memop = s->be_data + size; - tmphi = tcg_const_i64(0); tcg_gen_qemu_ld_i64(tmplo, tcg_addr, get_mem_index(s), memop); } else { bool be = s->be_data == MO_BE; @@ -XXX,XX +XXX,XX @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size) } tcg_gen_st_i64(tmplo, cpu_env, fp_reg_offset(s, destidx, MO_64)); - tcg_gen_st_i64(tmphi, cpu_env, fp_reg_hi_offset(s, destidx)); - tcg_temp_free_i64(tmplo); - tcg_temp_free_i64(tmphi); - clear_vec_high(s, true, destidx); + if (tmphi) { + tcg_gen_st_i64(tmphi, cpu_env, fp_reg_hi_offset(s, destidx)); + tcg_temp_free_i64(tmphi); + } + clear_vec_high(s, tmphi != NULL, destidx); } /* @@ -XXX,XX +XXX,XX @@ static void disas_simd_ext(DisasContext *s, uint32_t insn) read_vec_element(s, tcg_resh, rm, 0, MO_64); do_ext64(s, tcg_resh, tcg_resl, pos); } - tcg_gen_movi_i64(tcg_resh, 0); } else { TCGv_i64 tcg_hh; typedef struct { @@ -XXX,XX +XXX,XX @@ static void disas_simd_ext(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + } tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + clear_vec_high(s, is_q, rd); } /* TBL/TBX @@ -XXX,XX +XXX,XX @@ static void disas_simd_tb(DisasContext *s, uint32_t insn) * the input. */ tcg_resl = tcg_temp_new_i64(); - tcg_resh = tcg_temp_new_i64(); + tcg_resh = NULL; if (is_tblx) { read_vec_element(s, tcg_resl, rd, 0, MO_64); } else { tcg_gen_movi_i64(tcg_resl, 0); } - if (is_tblx && is_q) { - read_vec_element(s, tcg_resh, rd, 1, MO_64); - } else { - tcg_gen_movi_i64(tcg_resh, 0); + + if (is_q) { + tcg_resh = tcg_temp_new_i64(); + if (is_tblx) { + read_vec_element(s, tcg_resh, rd, 1, MO_64); + } else { + tcg_gen_movi_i64(tcg_resh, 0); + } } tcg_idx = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_tb(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); - tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + tcg_temp_free_i64(tcg_resh); + } + clear_vec_high(s, is_q, rd); } /* ZIP/UZP/TRN @@ -XXX,XX +XXX,XX @@ static void disas_simd_zip_trn(DisasContext *s, uint32_t insn) } tcg_resl = tcg_const_i64(0); - tcg_resh = tcg_const_i64(0); + tcg_resh = is_q ? tcg_const_i64(0) : NULL; tcg_res = tcg_temp_new_i64(); for (i = 0; i < elements; i++) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_zip_trn(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); - tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + tcg_temp_free_i64(tcg_resh); + } + clear_vec_high(s, is_q, rd); } /* -- 2.20.1 Using the MSR instruction to write to CPSR.E is deprecated, but it is required to work from any mode including unprivileged code. We were incorrectly forbidding usermode code from writing it because CPSR_USER did not include the CPSR_E bit. We use CPSR_USER in only three places: * as the mask of what to allow userspace MSR to write to CPSR * when deciding what bits a linux-user signal-return should be able to write from the sigcontext structure * in target_user_copy_regs() when we set up the initial registers for the linux-user process In the first two cases not being able to update CPSR.E is a bug, and in the third case it doesn't matter because CPSR.E is always 0 there. So we can fix both bugs by adding CPSR_E to CPSR_USER. Because the cpsr_write() in restore_sigcontext() is now changing a CPSR bit which is cached in hflags, we need to add an arm_rebuild_hflags() call there; the callsite in target_user_copy_regs() was already rebuilding hflags for other reasons. (The recommended way to change CPSR.E is to use the 'SETEND' instruction, which we do correctly allow from usermode code.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518142801.20503-1-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- linux-user/arm/signal.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ | CPSR_NZCV) /* Bits writable in user mode. */ -#define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE) +#define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE | CPSR_E) /* Execution state bits. MRS read as zero, MSR writes ignored. */ #define CPSR_EXEC (CPSR_T | CPSR_IT | CPSR_J | CPSR_IL) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc) #ifdef TARGET_CONFIG_CPU_32 __get_user(cpsr, &sc->arm_cpsr); cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr); + arm_rebuild_hflags(env); #endif err |= !valid_user_regs(env); -- 2.20.1 From: Amanieu d'Antras <amanieu@gmail.com> This fixes signal handlers running with the wrong endianness if the interrupted code used SETEND to dynamically switch endianness. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200511131117.2486486-1-amanieu@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/arm/signal.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ setup_return(CPUARMState *env, struct target_sigaction *ka, } else { cpsr &= ~CPSR_T; } + if (env->cp15.sctlr_el[1] & SCTLR_E0E) { + cpsr |= CPSR_E; + } else { + cpsr &= ~CPSR_E; + } if (ka->sa_flags & TARGET_SA_RESTORER) { if (is_fdpic) { @@ -XXX,XX +XXX,XX @@ setup_return(CPUARMState *env, struct target_sigaction *ka, env->regs[13] = frame_addr; env->regs[14] = retcode; env->regs[15] = handler & (thumb ? ~1 : ~3); - cpsr_write(env, cpsr, CPSR_IT | CPSR_T, CPSRWriteByInstr); + cpsr_write(env, cpsr, CPSR_IT | CPSR_T | CPSR_E, CPSRWriteByInstr); + arm_rebuild_hflags(env); return 0; } -- 2.20.1 The Arm signal-handling code has some parts ifdeffed with a TARGET_CONFIG_CPU_32, which is always defined. This is a leftover from when this code's structure was based on the Linux kernel signal handling code, where it was intended to support 26-bit Arm CPUs. The kernel dropped its CONFIG_CPU_32 in kernel commit 4da8b8208eded0ba21e3 in 2009. QEMU has never had 26-bit CPU support and is unlikely to ever add it; we certainly aren't going to support 26-bit Linux binaries via linux-user mode. The ifdef is just unhelpful noise, so remove it entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518143014.20689-1-peter.maydell@linaro.org --- linux-user/arm/signal.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ struct rt_sigframe_v2 abi_ulong retcode[4]; }; -#define TARGET_CONFIG_CPU_32 1 - /* * For ARM syscalls, we encode the syscall number into the instruction. */ @@ -XXX,XX +XXX,XX @@ setup_sigcontext(struct target_sigcontext *sc, /*struct _fpstate *fpstate,*/ __put_user(env->regs[13], &sc->arm_sp); __put_user(env->regs[14], &sc->arm_lr); __put_user(env->regs[15], &sc->arm_pc); -#ifdef TARGET_CONFIG_CPU_32 __put_user(cpsr_read(env), &sc->arm_cpsr); -#endif __put_user(/* current->thread.trap_no */ 0, &sc->trap_no); __put_user(/* current->thread.error_code */ 0, &sc->error_code); @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc) __get_user(env->regs[13], &sc->arm_sp); __get_user(env->regs[14], &sc->arm_lr); __get_user(env->regs[15], &sc->arm_pc); -#ifdef TARGET_CONFIG_CPU_32 __get_user(cpsr, &sc->arm_cpsr); cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr); arm_rebuild_hflags(env); -#endif err |= !valid_user_regs(env); -- 2.20.1 The following changes since commit 003ba52a8b327180e284630b289c6ece5a3e08b9: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-02-16 11:16:39 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230216 for you to fetch changes up to caf01d6a435d9f4a95aeae2f9fc6cb8b889b1fb8: tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG (2023-02-16 16:28:53 +0000) ---------------------------------------------------------------- target-arm queue: * Some mostly M-profile-related code cleanups * avocado: Retire the boot_linux.py AArch64 TCG tests * hw/arm/smmuv3: Add GBPA register * arm/virt: don't try to spell out the accelerator * hw/arm: Attach PSPI module to NPCM7XX SoC * Some cleanup/refactoring patches aiming towards allowing building Arm targets without CONFIG_TCG ---------------------------------------------------------------- Alex Bennée (1): tests/avocado: retire the Aarch64 TCG tests from boot_linux.py Claudio Fontana (3): target/arm: rename handle_semihosting to tcg_handle_semihosting target/arm: wrap psci call with tcg_enabled target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Cornelia Huck (1): arm/virt: don't try to spell out the accelerator Fabiano Rosas (7): target/arm: Move PC alignment check target/arm: Move cpregs code out of cpu.h tests/avocado: Skip tests that require a missing accelerator tests/avocado: Tag TCG tests with accel:tcg target/arm: Use "max" as default cpu for the virt machine with KVM tests/qtest: arm-cpu-features: Match tests to required accelerators tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Hao Wu (3): MAINTAINERS: Add myself to maintainers and remove Havard hw/ssi: Add Nuvoton PSPI Module hw/arm: Attach PSPI module to NPCM7XX SoC Jean-Philippe Brucker (2): hw/arm/smmu-common: Support 64-bit addresses hw/arm/smmu-common: Fix TTB1 handling Mostafa Saleh (1): hw/arm/smmuv3: Add GBPA register Philippe Mathieu-Daudé (12): hw/intc/armv7m_nvic: Use OBJECT_DECLARE_SIMPLE_TYPE() macro target/arm: Simplify arm_v7m_mmu_idx_for_secstate() for user emulation target/arm: Reduce arm_v7m_mmu_idx_[all/for_secstate_and_priv]() scope target/arm: Constify ID_PFR1 on user emulation target/arm: Convert CPUARMState::eabi to boolean target/arm: Avoid resetting CPUARMState::eabi field target/arm: Restrict CPUARMState::gicv3state to sysemu target/arm: Restrict CPUARMState::arm_boot_info to sysemu target/arm: Restrict CPUARMState::nvic to sysemu target/arm: Store CPUARMState::nvic as NVICState* target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h' hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependency MAINTAINERS | 8 +- docs/system/arm/nuvoton.rst | 2 +- hw/arm/smmuv3-internal.h | 7 + include/hw/arm/npcm7xx.h | 2 + include/hw/arm/smmu-common.h | 2 - include/hw/arm/smmuv3.h | 1 + include/hw/intc/armv7m_nvic.h | 128 +++++++++++++++++- include/hw/ssi/npcm_pspi.h | 53 ++++++++ linux-user/user-internals.h | 2 +- target/arm/cpregs.h | 98 ++++++++++++++ target/arm/cpu.h | 228 ++------------------------------- target/arm/internals.h | 14 -- hw/arm/npcm7xx.c | 25 +++- hw/arm/smmu-common.c | 4 +- hw/arm/smmuv3.c | 43 ++++++- hw/arm/virt.c | 10 +- hw/intc/armv7m_nvic.c | 38 ++---- hw/ssi/npcm_pspi.c | 221 ++++++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 4 +- target/arm/cpu.c | 5 +- target/arm/cpu_tcg.c | 3 + target/arm/helper.c | 31 +++-- target/arm/m_helper.c | 86 +++++++------ target/arm/machine.c | 18 +-- tests/qtest/arm-cpu-features.c | 28 ++-- hw/arm/Kconfig | 1 + hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + tests/avocado/avocado_qemu/__init__.py | 4 + tests/avocado/boot_linux.py | 48 ++----- tests/avocado/boot_linux_console.py | 1 + tests/avocado/machine_aarch64_virt.py | 63 ++++++++- tests/avocado/reverse_debugging.py | 8 ++ tests/qtest/meson.build | 4 +- 34 files changed, 798 insertions(+), 399 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro, similarly to automatic conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_NVIC "armv7m_nvic" - -typedef struct NVICState NVICState; -DECLARE_INSTANCE_CHECKER(NVICState, NVIC, - TYPE_NVIC) +OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return 0; } -#else +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + return ARMMMUIdx_MUser; +} + +#else /* !CONFIG_USER_ONLY */ /* * What kind of stack write are we doing? This affects how exceptions @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -#endif /* !CONFIG_USER_ONLY */ - ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, bool secstate, bool priv, bool negpri) { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } + +#endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv() are only used for system emulation in m_helper.c. Move the definitions to avoid prototype forward declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 -------- target/arm/m_helper.c | 74 +++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 51 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); -/* - * Return the MMU index for a v7M CPU with all relevant information - * manually specified. - */ -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri); - -/* - * Return the MMU index for a v7M CPU in the specified security and - * privilege state. - */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv); - /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) #else /* !CONFIG_USER_ONLY */ +static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (negpri) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (negpri) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} - -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) -{ - bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); - - return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); -} - -/* Return the MMU index for a v7M CPU in the specified security state */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) -{ - bool priv = arm_v7m_is_handler_mode(env) || - !(env->v7m.control[secstate] & 1); - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} - #endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } +#ifndef CONFIG_USER_ONLY /* * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. @@ -XXX,XX +XXX,XX @@ static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) return pfr1; } -#ifndef CONFIG_USER_ONLY static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_NO_RAW, .accessfn = access_aa32_tid3, +#ifdef CONFIG_USER_ONLY + .type = ARM_CP_CONST, + .resetvalue = cpu->isar.id_pfr1, +#else + .type = ARM_CP_NO_RAW, + .accessfn = access_aa32_tid3, .readfn = id_pfr1_read, - .writefn = arm_cp_write_ignore }, + .writefn = arm_cp_write_ignore +#endif + }, { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/user-internals.h | 2 +- target/arm/cpu.h | 2 +- linux-user/arm/cpu_loop.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/user-internals.h +++ b/linux-user/user-internals.h @@ -XXX,XX +XXX,XX @@ void print_termios(void *arg); #ifdef TARGET_ARM static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { - return cpu_env->eabi == 1; + return cpu_env->eabi; } #elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32) static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ - int eabi; + bool eabi; #endif struct CPUBreakpoint *cpu_breakpoint[16]; diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_SWI: { - env->eabi = 1; + env->eabi = true; /* system call */ if (env->thumb) { /* Thumb is always EABI style with syscall number in r7 */ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) * > 0xfffff and are handled below as out-of-range. */ n ^= ARM_SYSCALL_BASE; - env->eabi = 0; + env->eabi = false; } } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Although the 'eabi' field is only used in user emulation where CPU reset doesn't occur, it doesn't belong to the area to reset. Move it after the 'end_reset_fields' for consistency. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMVectorReg zarray[ARM_MAX_VQ * 16]; #endif -#if defined(CONFIG_USER_ONLY) - /* For usermode syscall translation. */ - bool eabi; -#endif - struct CPUBreakpoint *cpu_breakpoint[16]; struct CPUWatchpoint *cpu_watchpoint[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; +#if defined(CONFIG_USER_ONLY) + /* For usermode syscall translation. */ + bool eabi; +#endif /* CONFIG_USER_ONLY */ #ifdef TARGET_TAGGED_ADDRESSES /* Linux syscall tagged address support */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { void *nvic; const struct arm_boot_info *boot_info; +#if !defined(CONFIG_USER_ONLY) /* Store GICv3CPUState to access from this struct */ void *gicv3state; -#if defined(CONFIG_USER_ONLY) +#else /* CONFIG_USER_ONLY */ /* For usermode syscall translation. */ bool eabi; #endif /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; void *nvic; - const struct arm_boot_info *boot_info; #if !defined(CONFIG_USER_ONLY) + const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; #else /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint32_t ctrl; } sau; - void *nvic; #if !defined(CONFIG_USER_ONLY) + void *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> There is no point in using a void pointer to access the NVIC. Use the real type to avoid casting it while debugging. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 46 ++++++++++++++++++++++--------------------- hw/intc/armv7m_nvic.c | 38 ++++++++++++----------------------- target/arm/cpu.c | 1 + target/arm/m_helper.c | 2 +- 4 files changed, 39 insertions(+), 48 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMTBFlags { typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; +typedef struct NVICState NVICState; + typedef struct CPUArchState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; #if !defined(CONFIG_USER_ONLY) - void *nvic; + NVICState *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, /* Interface between CPU and Interrupt controller. */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(void *opaque); +bool armv7m_nvic_can_take_pending_exception(NVICState *s); #else -static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) { return true; } #endif /** * armv7m_nvic_set_pending: mark the specified exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * exceptions (exceptions generated in the course of trying to take * a different exception). */ -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Similar to armv7m_nvic_set_pending(), but specifically for exceptions * generated in the course of lazy stacking of FP registers. */ -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state - * @opaque: the NVIC + * @s: the NVIC * @pirq: set to pending exception number * @ptargets_secure: set to whether pending exception targets Secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); * to true if the current highest priority pending exception should * be taken to Secure state, false for NS. */ -void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @opaque: the NVIC + * @s: the NVIC * * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. */ -void armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(NVICState *s); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to complete * @secure: true if this exception was secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); * interrupt the current execution priority. This controls whether the * RDY bit for it in the FPCCR is set. */ -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @opaque: the NVIC + * @s: the NVIC * * Returns: the raw execution priority as defined by the v8M architecture. * This is the execution priority minus the effects of AIRCR.PRIS, * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. * (v8M ARM ARM I_PKLD.) */ -int armv7m_nvic_raw_execution_priority(void *opaque); +int armv7m_nvic_raw_execution_priority(NVICState *s); /** * armv7m_nvic_neg_prio_requested: return true if the requested execution * priority is negative for the specified security state. - * @opaque: the NVIC + * @s: the NVIC * @secure: the security state to test * This corresponds to the pseudocode IsReqExecPriNeg(). */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); #else -static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { return false; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { /* Return true if the requested execution priority is negative * for the specified security state, ie that security state @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) * mean we don't allow FAULTMASK_NS to actually make the execution * priority negative). Compare pseudocode IsReqExcPriNeg(). */ - NVICState *s = opaque; - if (s->cpu->env.v7m.faultmask[secure]) { return true; } @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) return false; } -bool armv7m_nvic_can_take_pending_exception(void *opaque) +bool armv7m_nvic_can_take_pending_exception(NVICState *s) { - NVICState *s = opaque; - return nvic_exec_prio(s) > nvic_pending_prio(s); } -int armv7m_nvic_raw_execution_priority(void *opaque) +int armv7m_nvic_raw_execution_priority(NVICState *s) { - NVICState *s = opaque; - return s->exception_prio; } @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) +static void armv7m_nvic_clear_pending(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); @@ -XXX,XX +XXX,XX @@ static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, false); + do_armv7m_nvic_set_pending(s, irq, secure, false); } -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, true); + do_armv7m_nvic_set_pending(s, irq, secure, true); } -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure) { /* * Pend an exception during lazy FP stacking. This differs @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) * whether we should escalate depends on the saved context * in the FPCCR register, not on the current state of the CPU/NVIC. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(NVICState *s) { - NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); @@ -XXX,XX +XXX,XX @@ static bool vectpending_targets_secure(NVICState *s) exc_targets_secure(s, s->vectpending); } -void armv7m_nvic_get_pending_irq_info(void *opaque, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure) { - NVICState *s = (NVICState *)opaque; const int pending = s->vectpending; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, *pirq = pending; } -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; int ret = 0; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure) { /* * Return whether an exception is "ready", i.e. it is enabled and is @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) * for non-banked exceptions secure is always false; for banked exceptions * it indicates which of the exceptions is required. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; int running = nvic_exec_prio(s); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#include "hw/intc/armv7m_nvic.h" #endif #include "sysemu/tcg.h" #include "sysemu/qtest.h" diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, * that we will need later in order to do lazy FP reg stacking. */ bool is_secure = env->v7m.secure; - void *nvic = env->nvic; + NVICState *nvic = env->nvic; /* * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits * are banked and we want to update the bit in the bank for the -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While dozens of files include "cpu.h", only 3 files require these NVIC helper declarations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 123 ++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 123 ---------------------------------- target/arm/cpu.c | 4 +- target/arm/cpu_tcg.c | 3 + target/arm/m_helper.c | 3 + 5 files changed, 132 insertions(+), 124 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { qemu_irq sysresetreq; }; +/* Interface between CPU and Interrupt controller. */ +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @s: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, + bool *ptargets_secure); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @s: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + */ +void armv7m_nvic_acknowledge_irq(NVICState *s); +/** + * armv7m_nvic_complete_irq: complete specified interrupt or exception + * @s: the NVIC + * @irq: the exception number to complete + * @secure: true if this exception was secure + * + * Returns: -1 if the irq was not active + * 1 if completing this irq brought us back to base (no active irqs) + * 0 if there is still an irq active after this one was completed + * (Ignoring -1, this is the same as the RETTOBASE value before completion.) + */ +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_raw_execution_priority: return the raw execution priority + * @s: the NVIC + * + * Returns: the raw execution priority as defined by the v8M architecture. + * This is the execution priority minus the effects of AIRCR.PRIS, + * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. + * (v8M ARM ARM I_PKLD.) + */ +int armv7m_nvic_raw_execution_priority(NVICState *s); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @s: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) +{ + return false; +} +#endif +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_can_take_pending_exception(NVICState *s); +#else +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) +{ + return true; +} +#endif + #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface between CPU and Interrupt controller. */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(NVICState *s); -#else -static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) -{ - return true; -} -#endif -/** - * armv7m_nvic_set_pending: mark the specified exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Marks the specified exception as pending. Note that we will assert() - * if @secure is true and @irq does not specify one of the fixed set - * of architecturally banked exceptions. - */ -void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for derived - * exceptions (exceptions generated in the course of trying to take - * a different exception). - */ -void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for exceptions - * generated in the course of lazy stacking of FP registers. - */ -void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_pending_irq_info: return highest priority pending - * exception, and whether it targets Secure state - * @s: the NVIC - * @pirq: set to pending exception number - * @ptargets_secure: set to whether pending exception targets Secure - * - * This function writes the number of the highest priority pending - * exception (the one which would be made active by - * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure - * to true if the current highest priority pending exception should - * be taken to Secure state, false for NS. - */ -void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, - bool *ptargets_secure); -/** - * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @s: the NVIC - * - * Move the current highest priority pending exception from the pending - * state to the active state, and update v7m.exception to indicate that - * it is the exception currently being handled. - */ -void armv7m_nvic_acknowledge_irq(NVICState *s); -/** - * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @s: the NVIC - * @irq: the exception number to complete - * @secure: true if this exception was secure - * - * Returns: -1 if the irq was not active - * 1 if completing this irq brought us back to base (no active irqs) - * 0 if there is still an irq active after this one was completed - * (Ignoring -1, this is the same as the RETTOBASE value before completion.) - */ -int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Return whether an exception is "ready", i.e. whether the exception is - * enabled and is configured at a priority which would allow it to - * interrupt the current execution priority. This controls whether the - * RDY bit for it in the FPCCR is set. - */ -bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @s: the NVIC - * - * Returns: the raw execution priority as defined by the v8M architecture. - * This is the execution priority minus the effects of AIRCR.PRIS, - * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. - * (v8M ARM ARM I_PKLD.) - */ -int armv7m_nvic_raw_execution_priority(NVICState *s); -/** - * armv7m_nvic_neg_prio_requested: return true if the requested execution - * priority is negative for the specified security state. - * @s: the NVIC - * @secure: the security state to test - * This corresponds to the pseudocode IsReqExecPriNeg(). - */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); -#else -static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) -{ - return false; -} -#endif - /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs * which are passed to define_arm_cp_regs(). diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#ifdef CONFIG_TCG #include "hw/intc/armv7m_nvic.h" -#endif +#endif /* CONFIG_TCG */ +#endif /* !CONFIG_USER_ONLY */ #include "sysemu/tcg.h" #include "sysemu/qtest.h" #include "sysemu/hw_accel.h" diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" +#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) +#include "hw/intc/armv7m_nvic.h" +#endif /* Share AArch32 -cpu max features with AArch64. */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#if !defined(CONFIG_USER_ONLY) +#include "hw/intc/armv7m_nvic.h" +#endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, uint32_t reg, uint32_t val) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The two TCG tests for GICv2 and GICv3 are very heavy weight distros that take a long time to boot up, especially for an --enable-debug build. The total code coverage they give is: Overall coverage rate: lines......: 11.2% (59584 of 530123 lines) functions..: 15.0% (7436 of 49443 functions) branches...: 6.3% (19273 of 303933 branches) We already get pretty close to that with the machine_aarch64_virt tests which only does one full boot (~120s vs ~600s) of alpine. We expand the kernel+initrd boot (~8s) to test both GICs and also add an RNG device and a block device to generate a few IRQs and exercise the storage layer. With that we get to a coverage of: Overall coverage rate: lines......: 11.0% (58121 of 530123 lines) functions..: 14.9% (7343 of 49443 functions) branches...: 6.0% (18269 of 303933 branches) which I feel is close enough given the massive time saving. If we want to target any more sub-systems we can use lighter weight more directed tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux.py | 48 ++++---------------- tests/avocado/machine_aarch64_virt.py | 63 ++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 46 deletions(-) diff --git a/tests/avocado/boot_linux.py b/tests/avocado/boot_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux.py +++ b/tests/avocado/boot_linux.py @@ -XXX,XX +XXX,XX @@ def test_pc_q35_kvm(self): self.launch_and_wait(set_up_ssh_connection=False) -# For Aarch64 we only boot KVM tests in CI as the TCG tests are very -# heavyweight. There are lighter weight distros which we use in the -# machine_aarch64_virt.py tests. +# For Aarch64 we only boot KVM tests in CI as booting the current +# Fedora OS in TCG tests is very heavyweight. There are lighter weight +# distros which we use in the machine_aarch64_virt.py tests. class BootLinuxAarch64(LinuxTest): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:virt - :avocado: tags=machine:gic-version=2 """ timeout = 720 - def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) - self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') - self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv2(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv2 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=2") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv3(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv3 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=3") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - def test_virt_kvm(self): """ :avocado: tags=accel:kvm @@ -XXX,XX +XXX,XX @@ def test_virt_kvm(self): self.require_accelerator("kvm") self.vm.add_args("-accel", "kvm") self.vm.add_args("-machine", "virt,gic-version=host") - self.add_common_args() + self.vm.add_args('-bios', + os.path.join(BUILD_DIR, 'pc-bios', + 'edk2-aarch64-code.fd')) + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') self.launch_and_wait(set_up_ssh_connection=False) diff --git a/tests/avocado/machine_aarch64_virt.py b/tests/avocado/machine_aarch64_virt.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aarch64_virt.py +++ b/tests/avocado/machine_aarch64_virt.py @@ -XXX,XX +XXX,XX @@ import time import os +import logging from avocado_qemu import QemuSystemTest from avocado_qemu import wait_for_console_pattern from avocado_qemu import exec_command from avocado_qemu import BUILD_DIR +from avocado.utils import process +from avocado.utils.path import find_command class Aarch64VirtMachine(QemuSystemTest): KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 ' @@ -XXX,XX +XXX,XX @@ def test_alpine_virt_tcg_gic_max(self): self.wait_for_console_pattern('Welcome to Alpine Linux 3.16') - def test_aarch64_virt(self): + def common_aarch64_virt(self, machine): """ - :avocado: tags=arch:aarch64 - :avocado: tags=machine:virt - :avocado: tags=accel:tcg - :avocado: tags=cpu:max + Common code to launch basic virt machine with kernel+initrd + and a scratch disk. """ + logger = logging.getLogger('aarch64_virt') + kernel_url = ('https://fileserver.linaro.org/s/' 'z6B2ARM7DQT3HWN/download') - kernel_hash = 'ed11daab50c151dde0e1e9c9cb8b2d9bd3215347' kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) @@ -XXX,XX +XXX,XX @@ def test_aarch64_virt(self): 'console=ttyAMA0') self.require_accelerator("tcg") self.vm.add_args('-cpu', 'max,pauth-impdef=on', + '-machine', machine, '-accel', 'tcg', '-kernel', kernel_path, '-append', kernel_command_line) + + # A RNG offers an easy way to generate a few IRQs + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', + 'rng-random,id=rng0,filename=/dev/urandom') + + # Also add a scratch block device + logger.info('creating scratch qcow2 image') + image_path = os.path.join(self.workdir, 'scratch.qcow2') + qemu_img = os.path.join(BUILD_DIR, 'qemu-img') + if not os.path.exists(qemu_img): + qemu_img = find_command('qemu-img', False) + if qemu_img is False: + self.cancel('Could not find "qemu-img", which is required to ' + 'create the temporary qcow2 image') + cmd = '%s create -f qcow2 %s 8M' % (qemu_img, image_path) + process.run(cmd) + + # Add the device + self.vm.add_args('-blockdev', + f"driver=qcow2,file.driver=file,file.filename={image_path},node-name=scratch") + self.vm.add_args('-device', + 'virtio-blk-device,drive=scratch') + self.vm.launch() self.wait_for_console_pattern('Welcome to Buildroot') time.sleep(0.1) exec_command(self, 'root') time.sleep(0.1) + exec_command(self, 'dd if=/dev/hwrng of=/dev/vda bs=512 count=4') + time.sleep(0.1) + exec_command(self, 'md5sum /dev/vda') + time.sleep(0.1) + exec_command(self, 'cat /proc/interrupts') + time.sleep(0.1) exec_command(self, 'cat /proc/self/maps') time.sleep(0.1) + + def test_aarch64_virt_gicv3(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic_version=3") + + def test_aarch64_virt_gicv2(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic-version=2") -- 2.34.1 From: Mostafa Saleh <smostafa@google.com> GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 7 +++++++ include/hw/arm/smmuv3.h | 1 + hw/arm/smmuv3.c | 43 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(CR0ACK, 0x24) REG32(CR1, 0x28) REG32(CR2, 0x2c) REG32(STATUSR, 0x40) +REG32(GBPA, 0x44) + FIELD(GBPA, ABORT, 20, 1) + FIELD(GBPA, UPDATE, 31, 1) + +/* Use incoming. */ +#define SMMU_GBPA_RESET_VAL 0x1000 + REG32(IRQ_CTRL, 0x50) FIELD(IRQ_CTRL, GERROR_IRQEN, 0, 1) FIELD(IRQ_CTRL, PRI_IRQEN, 1, 1) diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmuv3.h +++ b/include/hw/arm/smmuv3.h @@ -XXX,XX +XXX,XX @@ struct SMMUv3State { uint32_t cr[3]; uint32_t cr0ack; uint32_t statusr; + uint32_t gbpa; uint32_t irq_ctrl; uint32_t gerror; uint32_t gerrorn; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->gerror = 0; s->gerrorn = 0; s->statusr = 0; + s->gbpa = SMMU_GBPA_RESET_VAL; } static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf, @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr, qemu_mutex_lock(&s->mutex); if (!smmu_enabled(s)) { - status = SMMU_TRANS_DISABLE; + if (FIELD_EX32(s->gbpa, GBPA, ABORT)) { + status = SMMU_TRANS_ABORT; + } else { + status = SMMU_TRANS_DISABLE; + } goto epilogue; } @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr offset, case A_GERROR_IRQ_CFG2: s->gerror_irq_cfg2 = data; return MEMTX_OK; + case A_GBPA: + /* + * If UPDATE is not set, the write is ignored. This is the only + * permitted behavior in SMMUv3.2 and later. + */ + if (data & R_GBPA_UPDATE_MASK) { + /* Ignore update bit as write is synchronous. */ + s->gbpa = data & ~R_GBPA_UPDATE_MASK; + } + return MEMTX_OK; case A_STRTAB_BASE: /* 64b */ s->strtab_base = deposit64(s->strtab_base, 0, 32, data); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr offset, case A_STATUSR: *data = s->statusr; return MEMTX_OK; + case A_GBPA: + *data = s->gbpa; + return MEMTX_OK; case A_IRQ_CTRL: case A_IRQ_CTRL_ACK: *data = s->irq_ctrl; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3_queue = { }, }; +static bool smmuv3_gbpa_needed(void *opaque) +{ + SMMUv3State *s = opaque; + + /* Only migrate GBPA if it has different reset value. */ + return s->gbpa != SMMU_GBPA_RESET_VAL; +} + +static const VMStateDescription vmstate_gbpa = { + .name = "smmuv3/gbpa", + .version_id = 1, + .minimum_version_id = 1, + .needed = smmuv3_gbpa_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gbpa, SMMUv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { VMSTATE_END_OF_LIST(), }, + .subsections = (const VMStateDescription * []) { + &vmstate_gbpa, + NULL + } }; static void smmuv3_instance_init(Object *obj) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config XLNX_ZYNQMP_ARM select XLNX_CSU_DMA select XLNX_ZYNQMP select XLNX_ZDMA + select USB_DWC3 config XLNX_VERSAL bool -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (vms->secure && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Security extensions (TrustZone) to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->mte && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Havard is no longer working on the Nuvoton systems for a while and won't be able to do any work on it in the future. So I'll take over maintaining the Nuvoton system from him. Signed-off-by: Hao Wu <wuhaotsh@google.com> Acked-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/net/mv88w8618_eth.h F: docs/system/arm/musicpal.rst Nuvoton NPCM7xx -M: Havard Skinnemoen <hskinnemoen@google.com> M: Tyrone Ting <kfting@nuvoton.com> +M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Nuvoton's PSPI is a general purpose SPI module which enables connections to SPI-based peripheral devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 6 +- include/hw/ssi/npcm_pspi.h | 53 +++++++++ hw/ssi/npcm_pspi.c | 221 +++++++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + 5 files changed, 283 insertions(+), 4 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Tyrone Ting <kfting@nuvoton.com> M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported -F: hw/*/npcm7xx* -F: include/hw/*/npcm7xx* -F: tests/qtest/npcm7xx* +F: hw/*/npcm* +F: include/hw/*/npcm* +F: tests/qtest/npcm* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst diff --git a/include/hw/ssi/npcm_pspi.h b/include/hw/ssi/npcm_pspi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/npcm_pspi.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton Peripheral SPI Module + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM_PSPI_H +#define NPCM_PSPI_H + +#include "hw/ssi/ssi.h" +#include "hw/sysbus.h" + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM_PSPI_NR_REGS 3 + +/** + * NPCMPSPIState - Device state for one Flash Interface Unit. + * @parent: System bus device. + * @mmio: Memory region for register access. + * @spi: The SPI bus mastered by this controller. + * @regs: Register contents. + * @irq: The interrupt request queue for this module. + * + * Each PSPI has a shared bank of registers, and controls up to four chip + * selects. Each chip select has a dedicated memory region which may be used to + * read and write the flash connected to that chip select as if it were memory. + */ +typedef struct NPCMPSPIState { + SysBusDevice parent; + + MemoryRegion mmio; + + SSIBus *spi; + uint16_t regs[NPCM_PSPI_NR_REGS]; + qemu_irq irq; +} NPCMPSPIState; + +#define TYPE_NPCM_PSPI "npcm-pspi" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPSPIState, NPCM_PSPI) + +#endif /* NPCM_PSPI_H */ diff --git a/hw/ssi/npcm_pspi.c b/hw/ssi/npcm_pspi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/npcm_pspi.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM Peripheral SPI Module (PSPI) + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/irq.h" +#include "hw/registerfields.h" +#include "hw/ssi/npcm_pspi.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +REG16(PSPI_DATA, 0x0) +REG16(PSPI_CTL1, 0x2) + FIELD(PSPI_CTL1, SPIEN, 0, 1) + FIELD(PSPI_CTL1, MOD, 2, 1) + FIELD(PSPI_CTL1, EIR, 5, 1) + FIELD(PSPI_CTL1, EIW, 6, 1) + FIELD(PSPI_CTL1, SCM, 7, 1) + FIELD(PSPI_CTL1, SCIDL, 8, 1) + FIELD(PSPI_CTL1, SCDV, 9, 7) +REG16(PSPI_STAT, 0x4) + FIELD(PSPI_STAT, BSY, 0, 1) + FIELD(PSPI_STAT, RBF, 1, 1) + +static void npcm_pspi_update_irq(NPCMPSPIState *s) +{ + int level = 0; + + /* Only fire IRQ when the module is enabled. */ + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, SPIEN)) { + /* Update interrupt as BSY is cleared. */ + if ((!FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, BSY)) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIW)) { + level = 1; + } + + /* Update interrupt as RBF is set. */ + if (FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, RBF) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIR)) { + level = 1; + } + } + qemu_set_irq(s->irq, level); +} + +static uint16_t npcm_pspi_read_data(NPCMPSPIState *s) +{ + uint16_t value = s->regs[R_PSPI_DATA]; + + /* Clear stat bits as the value are read out. */ + s->regs[R_PSPI_STAT] = 0; + + return value; +} + +static void npcm_pspi_write_data(NPCMPSPIState *s, uint16_t data) +{ + uint16_t value = 0; + + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, MOD)) { + value = ssi_transfer(s->spi, extract16(data, 8, 8)) << 8; + } + value |= ssi_transfer(s->spi, extract16(data, 0, 8)); + s->regs[R_PSPI_DATA] = value; + + /* Mark data as available */ + s->regs[R_PSPI_STAT] = R_PSPI_STAT_BSY_MASK | R_PSPI_STAT_RBF_MASK; +} + +/* Control register read handler. */ +static uint64_t npcm_pspi_ctrl_read(void *opaque, hwaddr addr, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value; + + switch (addr) { + case A_PSPI_DATA: + value = npcm_pspi_read_data(s); + break; + + case A_PSPI_CTL1: + value = s->regs[R_PSPI_CTL1]; + break; + + case A_PSPI_STAT: + value = s->regs[R_PSPI_STAT]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return 0; + } + trace_npcm_pspi_ctrl_read(DEVICE(s)->canonical_path, addr, value); + npcm_pspi_update_irq(s); + + return value; +} + +/* Control register write handler. */ +static void npcm_pspi_ctrl_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value = v; + + trace_npcm_pspi_ctrl_write(DEVICE(s)->canonical_path, addr, value); + + switch (addr) { + case A_PSPI_DATA: + npcm_pspi_write_data(s, value); + break; + + case A_PSPI_CTL1: + s->regs[R_PSPI_CTL1] = value; + break; + + case A_PSPI_STAT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register PSPI_STAT: 0x%08" + PRIx64 "\n", DEVICE(s)->canonical_path, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return; + } + npcm_pspi_update_irq(s); +} + +static const MemoryRegionOps npcm_pspi_ctrl_ops = { + .read = npcm_pspi_ctrl_read, + .write = npcm_pspi_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 2, + .unaligned = false, + }, + .impl = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pspi_enter_reset(Object *obj, ResetType type) +{ + NPCMPSPIState *s = NPCM_PSPI(obj); + + trace_npcm_pspi_enter_reset(DEVICE(obj)->canonical_path, type); + memset(s->regs, 0, sizeof(s->regs)); +} + +static void npcm_pspi_realize(DeviceState *dev, Error **errp) +{ + NPCMPSPIState *s = NPCM_PSPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj = OBJECT(dev); + + s->spi = ssi_create_bus(dev, "pspi"); + memory_region_init_io(&s->mmio, obj, &npcm_pspi_ctrl_ops, s, + "mmio", 4 * KiB); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); +} + +static const VMStateDescription vmstate_npcm_pspi = { + .name = "npcm-pspi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16_ARRAY(regs, NPCMPSPIState, NPCM_PSPI_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + + +static void npcm_pspi_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM Peripheral SPI Module"; + dc->realize = npcm_pspi_realize; + dc->vmsd = &vmstate_npcm_pspi; + rc->phases.enter = npcm_pspi_enter_reset; +} + +static const TypeInfo npcm_pspi_types[] = { + { + .name = TYPE_NPCM_PSPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPSPIState), + .class_init = npcm_pspi_class_init, + }, +}; +DEFINE_TYPES(npcm_pspi_types); diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c')) -softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c', 'npcm_pspi.c')) softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_SPI', if_true: files('sifive_spi.c')) softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 +# npcm_pspi.c +npcm_pspi_enter_reset(const char *id, int reset_type) "%s reset type: %d" +npcm_pspi_ctrl_read(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 +npcm_pspi_ctrl_write(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 + # ibex_spi_host.c ibex_spi_host_reset(const char *msg) "%s" -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 25 +++++++++++++++++++++++-- 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * SMBus controller (SMBF) * Ethernet controller (EMC) * Tachometer + * Peripheral SPI controller (PSPI) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controller (GMAC) * USB device (USBD) - * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface * PCI and PCIe root complex and bridges diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/ssi/npcm_pspi.h" #include "hw/usb/hcd-ehci.h" #include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; + NPCMPSPIState pspi[2]; }; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_EMC1RX_IRQ = 15, NPCM7XX_EMC1TX_IRQ, NPCM7XX_MMC_IRQ = 26, + NPCM7XX_PSPI2_IRQ = 28, + NPCM7XX_PSPI1_IRQ = 31, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_emc_addr[] = { 0xf0826000, }; +/* Register base address for each PSPI Module */ +static const hwaddr npcm7xx_pspi_addr[] = { + 0xf0200000, + 0xf0201000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); } + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + object_initialize_child(obj, "pspi[*]", &s->pspi[i], TYPE_NPCM_PSPI); + } + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, npcm7xx_irq(s, NPCM7XX_MMC_IRQ)); + /* PSPI */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pspi_addr) != ARRAY_SIZE(s->pspi)); + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pspi[i]); + int irq = (i == 0) ? NPCM7XX_PSPI1_IRQ : NPCM7XX_PSPI2_IRQ; + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pspi_addr[i]); + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, irq)); + } + create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB); create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB); create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB); create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 2 -- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ #define SMMU_PCI_DEVFN_MAX 256 #define SMMU_PCI_DEVFN(sid) (sid & 0xFF) -#define SMMU_MAX_VA_BITS 48 - /* * Page table walk error types */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) memory_region_init_iommu(&sdev->iommu, sizeof(sdev->iommu), s->mrtypename, - OBJECT(s), name, 1ULL << SMMU_MAX_VA_BITS); + OBJECT(s), name, UINT64_MAX); address_space_init(&sdev->as, MEMORY_REGION(&sdev->iommu), name); trace_smmu_add_mr(name); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova) /* there is a ttbr0 region and we are in it (high bits all zero) */ return &cfg->tt[0]; } else if (cfg->tt[1].tsz && - !extract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte)) { + sextract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte) == -1) { /* there is a ttbr1 region and we are in it (high bits all one) */ return &cfg->tt[1]; } else if (!cfg->tt[0].tsz) { -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> make it clearer from the name that this is a tcg-only function. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) * trapped to the hypervisor in KVM. */ #ifdef CONFIG_TCG -static void handle_semihosting(CPUState *cs) +static void tcg_handle_semihosting(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) */ #ifdef CONFIG_TCG if (cs->exception_index == EXCP_SEMIHOST) { - handle_semihosting(cs); + tcg_handle_semihosting(cs); return; } #endif -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> for "all" builds (tcg + kvm), we want to avoid doing the psci check if tcg is built-in, but not enabled. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) env->exception.syndrome); } - if (arm_is_psci_call(cpu, cs->exception_index)) { + if (tcg_enabled() && arm_is_psci_call(cpu, cs->exception_index)) { arm_handle_psci_call(cpu); qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); return; -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) unsigned int cur_el = arm_current_el(env); int rt; - /* - * Note that new_el can never be 0. If cur_el is 0, then - * el0_a64 is is_a64(), else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + if (tcg_enabled()) { + /* + * Note that new_el can never be 0. If cur_el is 0, then + * el0_a64 is is_a64(), else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + } if (cur_el < new_el) { /* -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Move this earlier to make the next patch diff cleaner. While here update the comment slightly to not give the impression that the misalignment affects only TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } + /* + * Misaligned thumb pc is architecturally impossible. Fail the + * incoming migration. For TCG it would trigger the assert in + * thumb_tr_translate_insn(). + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } - /* - * Misaligned thumb pc is architecturally impossible. - * We have an assert in thumb_tr_translate_insn to verify this. - * Fail an incoming migrate to avoid this assert. - */ - if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { - return -1; - } - if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have a cpregs.h header which is more suitable for this code. Code moved verbatim. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 98 +++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 91 ----------------------------------------- 2 files changed, 98 insertions(+), 91 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SME = 1 << 19, }; +/* + * Interface for defining coprocessor registers. + * Registers are defined in tables of arm_cp_reginfo structs + * which are passed to define_arm_cp_regs(). + */ + +/* + * When looking up a coprocessor register we look for it + * via an integer which encodes all of: + * coprocessor number + * Crn, Crm, opc1, opc2 fields + * 32 or 64 bit register (ie is it accessed via MRC/MCR + * or via MRRC/MCRR?) + * non-secure/secure bank (AArch32 only) + * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. + * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). + */ +/* + * This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + +/* + * To enable banking of coprocessor registers depending on ns-bit we + * add a bit to distinguish between secure and non-secure cpregs in the + * hashtable. + */ +#define CP_REG_NS_SHIFT 29 +#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) + +#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ + ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ + ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) + +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + +/* + * Convert a full 64 bit KVM register ID to the truncated 32 bit + * version used as a key for the coprocessor register hashtable + */ +static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) +{ + uint32_t cpregid = kvmid; + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else { + if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + cpregid |= (1 << 15); + } + + /* + * KVM is always non-secure so add the NS flag on AArch32 register + * entries. + */ + cpregid |= 1 << CP_REG_NS_SHIFT; + } + return cpregid; +} + +/* + * Convert a truncated 32 bit hashtable key into the full + * 64 bit KVM register ID. + */ +static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) +{ + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; + } else { + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } + } + return kvmid; +} + /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface for defining coprocessor registers. - * Registers are defined in tables of arm_cp_reginfo structs - * which are passed to define_arm_cp_regs(). - */ - -/* When looking up a coprocessor register we look for it - * via an integer which encodes all of: - * coprocessor number - * Crn, Crm, opc1, opc2 fields - * 32 or 64 bit register (ie is it accessed via MRC/MCR - * or via MRRC/MCRR?) - * non-secure/secure bank (AArch32 only) - * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. - * (In this case crn and opc2 should be zero.) - * For AArch64, there is no 32/64 bit size distinction; - * instead all registers have a 2 bit op0, 3 bit op1 and op2, - * and 4 bit CRn and CRm. The encoding patterns are chosen - * to be easy to convert to and from the KVM encodings, and also - * so that the hashtable can contain both AArch32 and AArch64 - * registers (to allow for interprocessing where we might run - * 32 bit code on a 64 bit core). - */ -/* This bit is private to our hashtable cpreg; in KVM register - * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 - * in the upper bits of the 64 bit ID. - */ -#define CP_REG_AA64_SHIFT 28 -#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) - -/* To enable banking of coprocessor registers depending on ns-bit we - * add a bit to distinguish between secure and non-secure cpregs in the - * hashtable. - */ -#define CP_REG_NS_SHIFT 29 -#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) - -#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ - ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ - ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) - -#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ - (CP_REG_AA64_MASK | \ - ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ - ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ - ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ - ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ - ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ - ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) - -/* Convert a full 64 bit KVM register ID to the truncated 32 bit - * version used as a key for the coprocessor register hashtable - */ -static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) -{ - uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { - cpregid |= CP_REG_AA64_MASK; - } else { - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { - cpregid |= (1 << 15); - } - - /* KVM is always non-secure so add the NS flag on AArch32 register - * entries. - */ - cpregid |= 1 << CP_REG_NS_SHIFT; - } - return cpregid; -} - -/* Convert a truncated 32 bit hashtable key into the full - * 64 bit KVM register ID. - */ -static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) -{ - uint64_t kvmid; - - if (cpregid & CP_REG_AA64_MASK) { - kvmid = cpregid & ~CP_REG_AA64_MASK; - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; - } else { - kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; - } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; - } - } - return kvmid; -} - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> If a test was tagged with the "accel" tag and the specified accelerator it not present in the qemu binary, cancel the test. We can now write tests without explicit calls to require_accelerator, just the tag is enough. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/avocado_qemu/__init__.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/avocado/avocado_qemu/__init__.py b/tests/avocado/avocado_qemu/__init__.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/avocado_qemu/__init__.py +++ b/tests/avocado/avocado_qemu/__init__.py @@ -XXX,XX +XXX,XX @@ def setUp(self): super().setUp('qemu-system-') + accel_required = self._get_unique_tag_val('accel') + if accel_required: + self.require_accelerator(accel_required) + self.machine = self.params.get('machine', default=self._get_unique_tag_val('machine')) -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> This allows the test to be skipped when TCG is not present in the QEMU binary. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 1 + tests/avocado/reverse_debugging.py | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_orangepi_uboot_netbsd9(self): def test_aarch64_raspi3_atf(self): """ + :avocado: tags=accel:tcg :avocado: tags=arch:aarch64 :avocado: tags=machine:raspi3b :avocado: tags=cpu:cortex-a53 diff --git a/tests/avocado/reverse_debugging.py b/tests/avocado/reverse_debugging.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/reverse_debugging.py +++ b/tests/avocado/reverse_debugging.py @@ -XXX,XX +XXX,XX @@ def reverse_debugging(self, shift=7, args=None): vm.shutdown() class ReverseDebugging_X86_64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 0x10 REG_CS = 0x12 def get_pc(self, g): @@ -XXX,XX +XXX,XX @@ def test_x86_64_pc(self): self.reverse_debugging() class ReverseDebugging_AArch64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 32 # unidentified gitlab timeout problem -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->minimum_page_bits = 12; mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = virt_cpu_index_to_props; +#ifdef CONFIG_TCG mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); +#else + mc->default_cpu_type = ARM_CPU_TYPE_NAME("max"); +#endif mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; assert(!mc->get_hotplug_handler); -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ #define SVE_MAX_VQ 16 #define MACHINE "-machine virt,gic-version=max -accel tcg " -#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm -accel tcg " +#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm " #define QUERY_HEAD "{ 'execute': 'query-cpu-model-expansion', " \ " 'arguments': { 'type': 'full', " #define QUERY_TAIL "}}" @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { g_test_init(&argc, &argv, NULL); - qtest_add_data_func("/arm/query-cpu-model-expansion", - NULL, test_query_cpu_model_expansion); + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/query-cpu-model-expansion", + NULL, test_query_cpu_model_expansion); + } + + if (!g_str_equal(qtest_get_arch(), "aarch64")) { + goto out; + } /* * For now we only run KVM specific tests with AArch64 QEMU in * order avoid attempting to run an AArch32 QEMU with KVM on * AArch64 hosts. That won't work and isn't easy to detect. */ - if (g_str_equal(qtest_get_arch(), "aarch64") && qtest_has_accel("kvm")) { + if (qtest_has_accel("kvm")) { /* * This tests target the 'host' CPU type, so register it only if * KVM is available. */ qtest_add_data_func("/arm/kvm/query-cpu-model-expansion", NULL, test_query_cpu_model_expansion_kvm); - } - if (g_str_equal(qtest_get_arch(), "aarch64")) { - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", - NULL, sve_tests_sve_max_vq_8); - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", - NULL, sve_tests_sve_off); qtest_add_data_func("/arm/kvm/query-cpu-model-expansion/sve-off", NULL, sve_tests_sve_off_kvm); } + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", + NULL, sve_tests_sve_max_vq_8); + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", + NULL, sve_tests_sve_off); + } + +out: return g_test_run(); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> These tests set -accel tcg, so restrict them to when TCG is present. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_arm = \ # TODO: once aarch64 TCG is fixed on ARM 32 bit host, make bios-tables-test unconditional qtests_aarch64 = \ (cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ + (config_all.has_key('CONFIG_TCG') and config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? \ + ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ ['arm-cpu-features', -- 2.34.1