First arm pullreq of the 5.1 cycle; mostly bugfixes and some cleanup patches. The new clock modelling framework is the big thing here. -- PMM The following changes since commit 648db19685b7030aa558a4ddbd3a8e53d8c9a062: Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2020-04-29' into staging (2020-04-29 15:07:33 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200430 for you to fetch changes up to 1267437e593e85498f9105b3bdab796630d2e83f: hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes (2020-04-30 11:52:29 +0100) ---------------------------------------------------------------- target-arm queue: * xlnx-zdma: Fix endianness handling of descriptor loading * nrf51: Fix last GPIO CNF address * gicv3: Use gicr_typer in arm_gicv3_icc_reset * msf2: Add EMAC block to SmartFusion2 SoC * New clock modelling framework * hw/arm: versal: Setup the ADMA with 128bit bus-width * Cadence: gem: fix wraparound in 64bit descriptors * cadence_gem: clear RX control descriptor * target/arm: Vectorize integer comparison vs zero * hw/arm/virt: dt: add kaslr-seed property * hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes ---------------------------------------------------------------- Cameron Esfahani (1): nrf51: Fix last GPIO CNF address Damien Hedde (7): hw/core/clock-vmstate: define a vmstate entry for clock state qdev: add clock input&output support to devices. qdev-clock: introduce an init array to ease the device construction hw/misc/zynq_slcr: add clock generation for uarts hw/char/cadence_uart: add clock support hw/arm/xilinx_zynq: connect uart clocks to slcr qdev-monitor: print the device's clock with info qtree Edgar E. Iglesias (7): dma/xlnx-zdma: Fix descriptor loading (MEM) wrt endianness dma/xlnx-zdma: Fix descriptor loading (REG) wrt endianness hw/arm: versal: Setup the ADMA with 128bit bus-width device_tree: Allow name wildcards in qemu_fdt_node_path() device_tree: Constify compat in qemu_fdt_node_path() hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102 hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes Jerome Forissier (2): hw/arm/virt: dt: move creation of /secure-chosen to create_fdt() hw/arm/virt: dt: add kaslr-seed property Keqian Zhu (2): bugfix: Use gicr_typer in arm_gicv3_icc_reset Typo: Correct the name of CPU hotplug memory region Peter Maydell (2): hw/core/clock: introduce clock object docs/clocks: add device's clock documentation Philippe Mathieu-Daudé (3): target/arm: Restrict the Address Translate write operation to TCG accel target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] target/arm/cpu: Update coding style to make checkpatch.pl happy Ramon Fried (2): Cadence: gem: fix wraparound in 64bit descriptors net: cadence_gem: clear RX control descriptor Richard Henderson (1): target/arm: Vectorize integer comparison vs zero Subbaraya Sundeep (3): hw/net: Add Smartfusion2 emac block msf2: Add EMAC block to SmartFusion2 SoC tests/boot_linux_console: Add ethernet test to SmartFusion2 Thomas Huth (1): target/arm: Make cpu_register() available for other files hw/core/Makefile.objs | 2 + hw/net/Makefile.objs | 1 + tests/Makefile.include | 1 + include/hw/arm/msf2-soc.h | 2 + include/hw/char/cadence_uart.h | 1 + include/hw/clock.h | 225 +++++++++++++ include/hw/gpio/nrf51_gpio.h | 2 +- include/hw/net/msf2-emac.h | 53 +++ include/hw/qdev-clock.h | 159 +++++++++ include/hw/qdev-core.h | 12 + include/sysemu/device_tree.h | 5 +- target/arm/cpu-qom.h | 9 +- target/arm/helper.h | 27 +- target/arm/translate.h | 5 + device_tree.c | 4 +- hw/acpi/cpu.c | 2 +- hw/arm/msf2-soc.c | 26 +- hw/arm/virt.c | 20 +- hw/arm/xilinx_zynq.c | 57 +++- hw/arm/xlnx-versal.c | 2 + hw/arm/xlnx-zcu102.c | 39 ++- hw/char/cadence_uart.c | 73 +++- hw/core/clock-vmstate.c | 25 ++ hw/core/clock.c | 130 ++++++++ hw/core/qdev-clock.c | 185 +++++++++++ hw/core/qdev.c | 12 + hw/dma/xlnx-zdma.c | 25 +- hw/intc/arm_gicv3_kvm.c | 4 +- hw/misc/zynq_slcr.c | 172 +++++++++- hw/net/cadence_gem.c | 16 +- hw/net/msf2-emac.c | 589 +++++++++++++++++++++++++++++++++ qdev-monitor.c | 9 + target/arm/cpu.c | 25 +- target/arm/cpu64.c | 16 +- target/arm/helper.c | 17 + target/arm/neon_helper.c | 24 -- target/arm/translate-a64.c | 64 +--- target/arm/translate.c | 256 ++++++++++++-- target/arm/vec_helper.c | 25 ++ MAINTAINERS | 2 + docs/devel/clocks.rst | 391 ++++++++++++++++++++++ docs/devel/index.rst | 1 + hw/char/trace-events | 3 + hw/core/trace-events | 7 + tests/acceptance/boot_linux_console.py | 15 +- 45 files changed, 2538 insertions(+), 202 deletions(-) create mode 100644 include/hw/clock.h create mode 100644 include/hw/net/msf2-emac.h create mode 100644 include/hw/qdev-clock.h create mode 100644 hw/core/clock-vmstate.c create mode 100644 hw/core/clock.c create mode 100644 hw/core/qdev-clock.c create mode 100644 hw/net/msf2-emac.c create mode 100644 docs/devel/clocks.rst From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Fix descriptor loading from memory wrt host endianness. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200404122718.25111-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/xlnx-zdma.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xlnx-zdma.c +++ b/hw/dma/xlnx-zdma.c @@ -XXX,XX +XXX,XX @@ static void zdma_put_regaddr64(XlnxZDMA *s, unsigned int basereg, uint64_t addr) s->regs[basereg + 1] = addr >> 32; } -static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr, void *buf) +static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr, + XlnxZDMADescr *descr) { /* ZDMA descriptors must be aligned to their own size. */ if (addr % sizeof(XlnxZDMADescr)) { qemu_log_mask(LOG_GUEST_ERROR, "zdma: unaligned descriptor at %" PRIx64, addr); - memset(buf, 0x0, sizeof(XlnxZDMADescr)); + memset(descr, 0x0, sizeof(XlnxZDMADescr)); s->error = true; return false; } - address_space_read(s->dma_as, addr, s->attr, buf, sizeof(XlnxZDMADescr)); + descr->addr = address_space_ldq_le(s->dma_as, addr, s->attr, NULL); + descr->size = address_space_ldl_le(s->dma_as, addr + 8, s->attr, NULL); + descr->attr = address_space_ldl_le(s->dma_as, addr + 12, s->attr, NULL); return true; } @@ -XXX,XX +XXX,XX @@ static void zdma_update_descr_addr(XlnxZDMA *s, bool type, } else { addr = zdma_get_regaddr64(s, basereg); addr += sizeof(s->dsc_dst); - address_space_read(s->dma_as, addr, s->attr, (void *) &next, 8); + next = address_space_ldq_le(s->dma_as, addr, s->attr, NULL); } zdma_put_regaddr64(s, basereg, next); -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Fix descriptor loading from registers wrt host endianness. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20200404122718.25111-3-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/xlnx-zdma.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xlnx-zdma.c +++ b/hw/dma/xlnx-zdma.c @@ -XXX,XX +XXX,XX @@ static void zdma_put_regaddr64(XlnxZDMA *s, unsigned int basereg, uint64_t addr) s->regs[basereg + 1] = addr >> 32; } +static void zdma_load_descriptor_reg(XlnxZDMA *s, unsigned int reg, + XlnxZDMADescr *descr) +{ + descr->addr = zdma_get_regaddr64(s, reg); + descr->size = s->regs[reg + 2]; + descr->attr = s->regs[reg + 3]; +} + static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr, XlnxZDMADescr *descr) { @@ -XXX,XX +XXX,XX @@ static void zdma_load_src_descriptor(XlnxZDMA *s) unsigned int ptype = ARRAY_FIELD_EX32(s->regs, ZDMA_CH_CTRL0, POINT_TYPE); if (ptype == PT_REG) { - memcpy(&s->dsc_src, &s->regs[R_ZDMA_CH_SRC_DSCR_WORD0], - sizeof(s->dsc_src)); + zdma_load_descriptor_reg(s, R_ZDMA_CH_SRC_DSCR_WORD0, &s->dsc_src); return; } @@ -XXX,XX +XXX,XX @@ static void zdma_load_dst_descriptor(XlnxZDMA *s) bool dst_type; if (ptype == PT_REG) { - memcpy(&s->dsc_dst, &s->regs[R_ZDMA_CH_DST_DSCR_WORD0], - sizeof(s->dsc_dst)); + zdma_load_descriptor_reg(s, R_ZDMA_CH_DST_DSCR_WORD0, &s->dsc_dst); return; } -- 2.20.1 From: Cameron Esfahani <dirty@apple.com> NRF51_GPIO_REG_CNF_END doesn't actually refer to the start of the last valid CNF register: it's referring to the last byte of the last valid CNF register. This hasn't been a problem up to now, as current implementation in memory.c turns an unaligned 4-byte read from 0x77f to a single byte read and the qtest only looks at the least-significant byte of the register. But when running with patches which fix unaligned accesses in memory.c, the qtest breaks. Considering NRF51 doesn't support unaligned accesses, the simplest fix is to actually set NRF51_GPIO_REG_CNF_END to the start of the last valid CNF register: 0x77c. Now, qtests work with or without the unaligned access patches. Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cameron Esfahani <dirty@apple.com> Message-id: 51b427f06838622da783d38ba56e3630d6d85c60.1586925392.git.dirty@apple.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/gpio/nrf51_gpio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/hw/gpio/nrf51_gpio.h b/include/hw/gpio/nrf51_gpio.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/gpio/nrf51_gpio.h +++ b/include/hw/gpio/nrf51_gpio.h @@ -XXX,XX +XXX,XX @@ #define NRF51_GPIO_REG_DIRSET 0x518 #define NRF51_GPIO_REG_DIRCLR 0x51C #define NRF51_GPIO_REG_CNF_START 0x700 -#define NRF51_GPIO_REG_CNF_END 0x77F +#define NRF51_GPIO_REG_CNF_END 0x77C #define NRF51_GPIO_PULLDOWN 1 #define NRF51_GPIO_PULLUP 3 -- 2.20.1 From: Keqian Zhu <zhukeqian1@huawei.com> The KVM_VGIC_ATTR macro expect the second parameter as gicr_typer, of which high 32bit is constructed by mp_affinity. For most case, the high 32bit of mp_affinity is zero, so it will always access the ICC_CTLR_EL1 of CPU0. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-id: 20200413091552.62748-2-zhukeqian1@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_get(GICv3State *s) static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) { - ARMCPU *cpu; GICv3State *s; GICv3CPUState *c; c = (GICv3CPUState *)env->gicv3state; s = c->gic; - cpu = ARM_CPU(c->cpu); c->icc_pmr_el1 = 0; c->icc_bpr[GICV3_G0] = GIC_MIN_BPR; @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) /* Initialize to actual HW supported configuration */ kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, - KVM_VGIC_ATTR(ICC_CTLR_EL1, cpu->mp_affinity), + KVM_VGIC_ATTR(ICC_CTLR_EL1, c->gicr_typer), &c->icc_ctlr_el1[GICV3_NS], false, &error_abort); c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; -- 2.20.1 From: Keqian Zhu <zhukeqian1@huawei.com> Replace "acpi-mem-hotplug" with "acpi-cpu-hotplug" Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-id: 20200413091552.62748-4-zhukeqian1@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/acpi/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/acpi/cpu.c b/hw/acpi/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/cpu.c +++ b/hw/acpi/cpu.c @@ -XXX,XX +XXX,XX @@ void cpu_hotplug_hw_init(MemoryRegion *as, Object *owner, state->devs[i].arch_id = id_list->cpus[i].arch_id; } memory_region_init_io(&state->ctrl_reg, owner, &cpu_hotplug_ops, state, - "acpi-mem-hotplug", ACPI_CPU_HOTPLUG_REG_LEN); + "acpi-cpu-hotplug", ACPI_CPU_HOTPLUG_REG_LEN); memory_region_add_subregion(as, base_addr, &state->ctrl_reg); } -- 2.20.1 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Modelled Ethernet MAC of Smartfusion2 SoC. Micrel KSZ8051 PHY is present on Emcraft's SOM kit hence same PHY is emulated. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1587048891-30493-2-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/Makefile.objs | 1 + include/hw/net/msf2-emac.h | 53 ++++ hw/net/msf2-emac.c | 589 +++++++++++++++++++++++++++++++++++++ MAINTAINERS | 2 + 4 files changed, 645 insertions(+) create mode 100644 include/hw/net/msf2-emac.h create mode 100644 hw/net/msf2-emac.c diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Makefile.objs +++ b/hw/net/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_ROCKER) += rocker/rocker.o rocker/rocker_fp.o \ obj-$(call lnot,$(CONFIG_ROCKER)) += rocker/qmp-norocker.o common-obj-$(CONFIG_CAN_BUS) += can/ +common-obj-$(CONFIG_MSF2) += msf2-emac.o diff --git a/include/hw/net/msf2-emac.h b/include/hw/net/msf2-emac.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/msf2-emac.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Smartfusion2 Ethernet MAC. + * + * Copyright (c) 2020 Subbaraya Sundeep <sundeep.lkml@gmail.com>. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/sysbus.h" +#include "exec/memory.h" +#include "net/net.h" +#include "net/eth.h" + +#define TYPE_MSS_EMAC "msf2-emac" +#define MSS_EMAC(obj) \ + OBJECT_CHECK(MSF2EmacState, (obj), TYPE_MSS_EMAC) + +#define R_MAX (0x1a0 / 4) +#define PHY_MAX_REGS 32 + +typedef struct MSF2EmacState { + SysBusDevice parent; + + MemoryRegion mmio; + MemoryRegion *dma_mr; + AddressSpace dma_as; + + qemu_irq irq; + NICState *nic; + NICConf conf; + + uint8_t mac_addr[ETH_ALEN]; + uint32_t rx_desc; + uint16_t phy_regs[PHY_MAX_REGS]; + + uint32_t regs[R_MAX]; +} MSF2EmacState; diff --git a/hw/net/msf2-emac.c b/hw/net/msf2-emac.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/msf2-emac.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Smartfusion2 Ethernet MAC. + * + * Copyright (c) 2020 Subbaraya Sundeep <sundeep.lkml@gmail.com>. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * Refer to section Ethernet MAC in the document: + * UG0331: SmartFusion2 Microcontroller Subsystem User Guide + * Datasheet URL: + * https://www.microsemi.com/document-portal/cat_view/56661-internal-documents/ + * 56758-soc?lang=en&limit=20&limitstart=220 + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "exec/address-spaces.h" +#include "hw/registerfields.h" +#include "hw/net/msf2-emac.h" +#include "hw/net/mii.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" + +REG32(CFG1, 0x0) + FIELD(CFG1, RESET, 31, 1) + FIELD(CFG1, RX_EN, 2, 1) + FIELD(CFG1, TX_EN, 0, 1) + FIELD(CFG1, LB_EN, 8, 1) +REG32(CFG2, 0x4) +REG32(IFG, 0x8) +REG32(HALF_DUPLEX, 0xc) +REG32(MAX_FRAME_LENGTH, 0x10) +REG32(MII_CMD, 0x24) + FIELD(MII_CMD, READ, 0, 1) +REG32(MII_ADDR, 0x28) + FIELD(MII_ADDR, REGADDR, 0, 5) + FIELD(MII_ADDR, PHYADDR, 8, 5) +REG32(MII_CTL, 0x2c) +REG32(MII_STS, 0x30) +REG32(STA1, 0x40) +REG32(STA2, 0x44) +REG32(FIFO_CFG0, 0x48) +REG32(FIFO_CFG4, 0x58) + FIELD(FIFO_CFG4, BCAST, 9, 1) + FIELD(FIFO_CFG4, MCAST, 8, 1) +REG32(FIFO_CFG5, 0x5C) + FIELD(FIFO_CFG5, BCAST, 9, 1) + FIELD(FIFO_CFG5, MCAST, 8, 1) +REG32(DMA_TX_CTL, 0x180) + FIELD(DMA_TX_CTL, EN, 0, 1) +REG32(DMA_TX_DESC, 0x184) +REG32(DMA_TX_STATUS, 0x188) + FIELD(DMA_TX_STATUS, PKTCNT, 16, 8) + FIELD(DMA_TX_STATUS, UNDERRUN, 1, 1) + FIELD(DMA_TX_STATUS, PKT_SENT, 0, 1) +REG32(DMA_RX_CTL, 0x18c) + FIELD(DMA_RX_CTL, EN, 0, 1) +REG32(DMA_RX_DESC, 0x190) +REG32(DMA_RX_STATUS, 0x194) + FIELD(DMA_RX_STATUS, PKTCNT, 16, 8) + FIELD(DMA_RX_STATUS, OVERFLOW, 2, 1) + FIELD(DMA_RX_STATUS, PKT_RCVD, 0, 1) +REG32(DMA_IRQ_MASK, 0x198) +REG32(DMA_IRQ, 0x19c) + +#define EMPTY_MASK (1 << 31) +#define PKT_SIZE 0x7FF +#define PHYADDR 0x1 +#define MAX_PKT_SIZE 2048 + +typedef struct { + uint32_t pktaddr; + uint32_t pktsize; + uint32_t next; +} EmacDesc; + +static uint32_t emac_get_isr(MSF2EmacState *s) +{ + uint32_t ier = s->regs[R_DMA_IRQ_MASK]; + uint32_t tx = s->regs[R_DMA_TX_STATUS] & 0xF; + uint32_t rx = s->regs[R_DMA_RX_STATUS] & 0xF; + uint32_t isr = (rx << 4) | tx; + + s->regs[R_DMA_IRQ] = ier & isr; + return s->regs[R_DMA_IRQ]; +} + +static void emac_update_irq(MSF2EmacState *s) +{ + bool intr = emac_get_isr(s); + + qemu_set_irq(s->irq, intr); +} + +static void emac_load_desc(MSF2EmacState *s, EmacDesc *d, hwaddr desc) +{ + address_space_read(&s->dma_as, desc, MEMTXATTRS_UNSPECIFIED, d, sizeof *d); + /* Convert from LE into host endianness. */ + d->pktaddr = le32_to_cpu(d->pktaddr); + d->pktsize = le32_to_cpu(d->pktsize); + d->next = le32_to_cpu(d->next); +} + +static void emac_store_desc(MSF2EmacState *s, EmacDesc *d, hwaddr desc) +{ + /* Convert from host endianness into LE. */ + d->pktaddr = cpu_to_le32(d->pktaddr); + d->pktsize = cpu_to_le32(d->pktsize); + d->next = cpu_to_le32(d->next); + + address_space_write(&s->dma_as, desc, MEMTXATTRS_UNSPECIFIED, d, sizeof *d); +} + +static void msf2_dma_tx(MSF2EmacState *s) +{ + NetClientState *nc = qemu_get_queue(s->nic); + hwaddr desc = s->regs[R_DMA_TX_DESC]; + uint8_t buf[MAX_PKT_SIZE]; + EmacDesc d; + int size; + uint8_t pktcnt; + uint32_t status; + + if (!(s->regs[R_CFG1] & R_CFG1_TX_EN_MASK)) { + return; + } + + while (1) { + emac_load_desc(s, &d, desc); + if (d.pktsize & EMPTY_MASK) { + break; + } + size = d.pktsize & PKT_SIZE; + address_space_read(&s->dma_as, d.pktaddr, MEMTXATTRS_UNSPECIFIED, + buf, size); + /* + * This is very basic way to send packets. Ideally there should be + * a FIFO and packets should be sent out from FIFO only when + * R_CFG1 bit 0 is set. + */ + if (s->regs[R_CFG1] & R_CFG1_LB_EN_MASK) { + nc->info->receive(nc, buf, size); + } else { + qemu_send_packet(nc, buf, size); + } + d.pktsize |= EMPTY_MASK; + emac_store_desc(s, &d, desc); + /* update sent packets count */ + status = s->regs[R_DMA_TX_STATUS]; + pktcnt = FIELD_EX32(status, DMA_TX_STATUS, PKTCNT); + pktcnt++; + s->regs[R_DMA_TX_STATUS] = FIELD_DP32(status, DMA_TX_STATUS, + PKTCNT, pktcnt); + s->regs[R_DMA_TX_STATUS] |= R_DMA_TX_STATUS_PKT_SENT_MASK; + desc = d.next; + } + s->regs[R_DMA_TX_STATUS] |= R_DMA_TX_STATUS_UNDERRUN_MASK; + s->regs[R_DMA_TX_CTL] &= ~R_DMA_TX_CTL_EN_MASK; +} + +static void msf2_phy_update_link(MSF2EmacState *s) +{ + /* Autonegotiation status mirrors link status. */ + if (qemu_get_queue(s->nic)->link_down) { + s->phy_regs[MII_BMSR] &= ~(MII_BMSR_AN_COMP | + MII_BMSR_LINK_ST); + } else { + s->phy_regs[MII_BMSR] |= (MII_BMSR_AN_COMP | + MII_BMSR_LINK_ST); + } +} + +static void msf2_phy_reset(MSF2EmacState *s) +{ + memset(&s->phy_regs[0], 0, sizeof(s->phy_regs)); + s->phy_regs[MII_BMCR] = 0x1140; + s->phy_regs[MII_BMSR] = 0x7968; + s->phy_regs[MII_PHYID1] = 0x0022; + s->phy_regs[MII_PHYID2] = 0x1550; + s->phy_regs[MII_ANAR] = 0x01E1; + s->phy_regs[MII_ANLPAR] = 0xCDE1; + + msf2_phy_update_link(s); +} + +static void write_to_phy(MSF2EmacState *s) +{ + uint8_t reg_addr = s->regs[R_MII_ADDR] & R_MII_ADDR_REGADDR_MASK; + uint8_t phy_addr = (s->regs[R_MII_ADDR] >> R_MII_ADDR_PHYADDR_SHIFT) & + R_MII_ADDR_REGADDR_MASK; + uint16_t data = s->regs[R_MII_CTL] & 0xFFFF; + + if (phy_addr != PHYADDR) { + return; + } + + switch (reg_addr) { + case MII_BMCR: + if (data & MII_BMCR_RESET) { + /* Phy reset */ + msf2_phy_reset(s); + data &= ~MII_BMCR_RESET; + } + if (data & MII_BMCR_AUTOEN) { + /* Complete autonegotiation immediately */ + data &= ~MII_BMCR_AUTOEN; + s->phy_regs[MII_BMSR] |= MII_BMSR_AN_COMP; + } + break; + } + + s->phy_regs[reg_addr] = data; +} + +static uint16_t read_from_phy(MSF2EmacState *s) +{ + uint8_t reg_addr = s->regs[R_MII_ADDR] & R_MII_ADDR_REGADDR_MASK; + uint8_t phy_addr = (s->regs[R_MII_ADDR] >> R_MII_ADDR_PHYADDR_SHIFT) & + R_MII_ADDR_REGADDR_MASK; + + if (phy_addr == PHYADDR) { + return s->phy_regs[reg_addr]; + } else { + return 0xFFFF; + } +} + +static void msf2_emac_do_reset(MSF2EmacState *s) +{ + memset(&s->regs[0], 0, sizeof(s->regs)); + s->regs[R_CFG1] = 0x80000000; + s->regs[R_CFG2] = 0x00007000; + s->regs[R_IFG] = 0x40605060; + s->regs[R_HALF_DUPLEX] = 0x00A1F037; + s->regs[R_MAX_FRAME_LENGTH] = 0x00000600; + s->regs[R_FIFO_CFG5] = 0X3FFFF; + + msf2_phy_reset(s); +} + +static uint64_t emac_read(void *opaque, hwaddr addr, unsigned int size) +{ + MSF2EmacState *s = opaque; + uint32_t r = 0; + + addr >>= 2; + + switch (addr) { + case R_DMA_IRQ: + r = emac_get_isr(s); + break; + default: + if (addr >= ARRAY_SIZE(s->regs)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + return r; + } + r = s->regs[addr]; + break; + } + return r; +} + +static void emac_write(void *opaque, hwaddr addr, uint64_t val64, + unsigned int size) +{ + MSF2EmacState *s = opaque; + uint32_t value = val64; + uint32_t enreqbits; + uint8_t pktcnt; + + addr >>= 2; + switch (addr) { + case R_DMA_TX_CTL: + s->regs[addr] = value; + if (value & R_DMA_TX_CTL_EN_MASK) { + msf2_dma_tx(s); + } + break; + case R_DMA_RX_CTL: + s->regs[addr] = value; + if (value & R_DMA_RX_CTL_EN_MASK) { + s->rx_desc = s->regs[R_DMA_RX_DESC]; + qemu_flush_queued_packets(qemu_get_queue(s->nic)); + } + break; + case R_CFG1: + s->regs[addr] = value; + if (value & R_CFG1_RESET_MASK) { + msf2_emac_do_reset(s); + } + break; + case R_FIFO_CFG0: + /* + * For our implementation, turning on modules is instantaneous, + * so the states requested via the *ENREQ bits appear in the + * *ENRPLY bits immediately. Also the reset bits to reset PE-MCXMAC + * module are not emulated here since it deals with start of frames, + * inter-packet gap and control frames. + */ + enreqbits = extract32(value, 8, 5); + s->regs[addr] = deposit32(value, 16, 5, enreqbits); + break; + case R_DMA_TX_DESC: + if (value & 0x3) { + qemu_log_mask(LOG_GUEST_ERROR, "Tx Descriptor address should be" + " 32 bit aligned\n"); + } + /* Ignore [1:0] bits */ + s->regs[addr] = value & ~3; + break; + case R_DMA_RX_DESC: + if (value & 0x3) { + qemu_log_mask(LOG_GUEST_ERROR, "Rx Descriptor address should be" + " 32 bit aligned\n"); + } + /* Ignore [1:0] bits */ + s->regs[addr] = value & ~3; + break; + case R_DMA_TX_STATUS: + if (value & R_DMA_TX_STATUS_UNDERRUN_MASK) { + s->regs[addr] &= ~R_DMA_TX_STATUS_UNDERRUN_MASK; + } + if (value & R_DMA_TX_STATUS_PKT_SENT_MASK) { + pktcnt = FIELD_EX32(s->regs[addr], DMA_TX_STATUS, PKTCNT); + pktcnt--; + s->regs[addr] = FIELD_DP32(s->regs[addr], DMA_TX_STATUS, + PKTCNT, pktcnt); + if (pktcnt == 0) { + s->regs[addr] &= ~R_DMA_TX_STATUS_PKT_SENT_MASK; + } + } + break; + case R_DMA_RX_STATUS: + if (value & R_DMA_RX_STATUS_OVERFLOW_MASK) { + s->regs[addr] &= ~R_DMA_RX_STATUS_OVERFLOW_MASK; + } + if (value & R_DMA_RX_STATUS_PKT_RCVD_MASK) { + pktcnt = FIELD_EX32(s->regs[addr], DMA_RX_STATUS, PKTCNT); + pktcnt--; + s->regs[addr] = FIELD_DP32(s->regs[addr], DMA_RX_STATUS, + PKTCNT, pktcnt); + if (pktcnt == 0) { + s->regs[addr] &= ~R_DMA_RX_STATUS_PKT_RCVD_MASK; + } + } + break; + case R_DMA_IRQ: + break; + case R_MII_CMD: + if (value & R_MII_CMD_READ_MASK) { + s->regs[R_MII_STS] = read_from_phy(s); + } + break; + case R_MII_CTL: + s->regs[addr] = value; + write_to_phy(s); + break; + case R_STA1: + s->regs[addr] = value; + /* + * R_STA1 [31:24] : octet 1 of mac address + * R_STA1 [23:16] : octet 2 of mac address + * R_STA1 [15:8] : octet 3 of mac address + * R_STA1 [7:0] : octet 4 of mac address + */ + stl_be_p(s->mac_addr, value); + break; + case R_STA2: + s->regs[addr] = value; + /* + * R_STA2 [31:24] : octet 5 of mac address + * R_STA2 [23:16] : octet 6 of mac address + */ + stw_be_p(s->mac_addr + 4, value >> 16); + break; + default: + if (addr >= ARRAY_SIZE(s->regs)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + return; + } + s->regs[addr] = value; + break; + } + emac_update_irq(s); +} + +static const MemoryRegionOps emac_ops = { + .read = emac_read, + .write = emac_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4 + } +}; + +static bool emac_can_rx(NetClientState *nc) +{ + MSF2EmacState *s = qemu_get_nic_opaque(nc); + + return (s->regs[R_CFG1] & R_CFG1_RX_EN_MASK) && + (s->regs[R_DMA_RX_CTL] & R_DMA_RX_CTL_EN_MASK); +} + +static bool addr_filter_ok(MSF2EmacState *s, const uint8_t *buf) +{ + /* The broadcast MAC address: FF:FF:FF:FF:FF:FF */ + const uint8_t broadcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF }; + bool bcast_en = true; + bool mcast_en = true; + + if (s->regs[R_FIFO_CFG5] & R_FIFO_CFG5_BCAST_MASK) { + bcast_en = true; /* Broadcast dont care for drop circuitry */ + } else if (s->regs[R_FIFO_CFG4] & R_FIFO_CFG4_BCAST_MASK) { + bcast_en = false; + } + + if (s->regs[R_FIFO_CFG5] & R_FIFO_CFG5_MCAST_MASK) { + mcast_en = true; /* Multicast dont care for drop circuitry */ + } else if (s->regs[R_FIFO_CFG4] & R_FIFO_CFG4_MCAST_MASK) { + mcast_en = false; + } + + if (!memcmp(buf, broadcast_addr, sizeof(broadcast_addr))) { + return bcast_en; + } + + if (buf[0] & 1) { + return mcast_en; + } + + return !memcmp(buf, s->mac_addr, sizeof(s->mac_addr)); +} + +static ssize_t emac_rx(NetClientState *nc, const uint8_t *buf, size_t size) +{ + MSF2EmacState *s = qemu_get_nic_opaque(nc); + EmacDesc d; + uint8_t pktcnt; + uint32_t status; + + if (size > (s->regs[R_MAX_FRAME_LENGTH] & 0xFFFF)) { + return size; + } + if (!addr_filter_ok(s, buf)) { + return size; + } + + emac_load_desc(s, &d, s->rx_desc); + + if (d.pktsize & EMPTY_MASK) { + address_space_write(&s->dma_as, d.pktaddr, MEMTXATTRS_UNSPECIFIED, + buf, size & PKT_SIZE); + d.pktsize = size & PKT_SIZE; + emac_store_desc(s, &d, s->rx_desc); + /* update received packets count */ + status = s->regs[R_DMA_RX_STATUS]; + pktcnt = FIELD_EX32(status, DMA_RX_STATUS, PKTCNT); + pktcnt++; + s->regs[R_DMA_RX_STATUS] = FIELD_DP32(status, DMA_RX_STATUS, + PKTCNT, pktcnt); + s->regs[R_DMA_RX_STATUS] |= R_DMA_RX_STATUS_PKT_RCVD_MASK; + s->rx_desc = d.next; + } else { + s->regs[R_DMA_RX_CTL] &= ~R_DMA_RX_CTL_EN_MASK; + s->regs[R_DMA_RX_STATUS] |= R_DMA_RX_STATUS_OVERFLOW_MASK; + } + emac_update_irq(s); + return size; +} + +static void msf2_emac_reset(DeviceState *dev) +{ + MSF2EmacState *s = MSS_EMAC(dev); + + msf2_emac_do_reset(s); +} + +static void emac_set_link(NetClientState *nc) +{ + MSF2EmacState *s = qemu_get_nic_opaque(nc); + + msf2_phy_update_link(s); +} + +static NetClientInfo net_msf2_emac_info = { + .type = NET_CLIENT_DRIVER_NIC, + .size = sizeof(NICState), + .can_receive = emac_can_rx, + .receive = emac_rx, + .link_status_changed = emac_set_link, +}; + +static void msf2_emac_realize(DeviceState *dev, Error **errp) +{ + MSF2EmacState *s = MSS_EMAC(dev); + + if (!s->dma_mr) { + error_setg(errp, "MSS_EMAC 'ahb-bus' link not set"); + return; + } + + address_space_init(&s->dma_as, s->dma_mr, "emac-ahb"); + + qemu_macaddr_default_if_unset(&s->conf.macaddr); + s->nic = qemu_new_nic(&net_msf2_emac_info, &s->conf, + object_get_typename(OBJECT(dev)), dev->id, s); + qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); +} + +static void msf2_emac_init(Object *obj) +{ + MSF2EmacState *s = MSS_EMAC(obj); + + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + memory_region_init_io(&s->mmio, obj, &emac_ops, s, + "msf2-emac", R_MAX * 4); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); +} + +static Property msf2_emac_properties[] = { + DEFINE_PROP_LINK("ahb-bus", MSF2EmacState, dma_mr, + TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_NIC_PROPERTIES(MSF2EmacState, conf), + DEFINE_PROP_END_OF_LIST(), +}; + +static const VMStateDescription vmstate_msf2_emac = { + .name = TYPE_MSS_EMAC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(mac_addr, MSF2EmacState, ETH_ALEN), + VMSTATE_UINT32(rx_desc, MSF2EmacState), + VMSTATE_UINT16_ARRAY(phy_regs, MSF2EmacState, PHY_MAX_REGS), + VMSTATE_UINT32_ARRAY(regs, MSF2EmacState, R_MAX), + VMSTATE_END_OF_LIST() + } +}; + +static void msf2_emac_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = msf2_emac_realize; + dc->reset = msf2_emac_reset; + dc->vmsd = &vmstate_msf2_emac; + device_class_set_props(dc, msf2_emac_properties); +} + +static const TypeInfo msf2_emac_info = { + .name = TYPE_MSS_EMAC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSF2EmacState), + .instance_init = msf2_emac_init, + .class_init = msf2_emac_class_init, +}; + +static void msf2_emac_register_types(void) +{ + type_register_static(&msf2_emac_info); +} + +type_init(msf2_emac_register_types) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/arm/msf2-soc.h F: include/hw/misc/msf2-sysreg.h F: include/hw/timer/mss-timer.h F: include/hw/ssi/mss-spi.h +F: hw/net/msf2-emac.c +F: include/hw/net/msf2-emac.h Emcraft M2S-FG484 M: Subbaraya Sundeep <sundeep.lkml@gmail.com> -- 2.20.1 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> With SmartFusion2 Ethernet MAC model in place this patch adds the same to SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1587048891-30493-3-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/msf2-soc.h | 2 ++ hw/arm/msf2-soc.c | 26 ++++++++++++++++++++++++-- 2 files changed, 26 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/msf2-soc.h b/include/hw/arm/msf2-soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/msf2-soc.h +++ b/include/hw/arm/msf2-soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/mss-timer.h" #include "hw/misc/msf2-sysreg.h" #include "hw/ssi/mss-spi.h" +#include "hw/net/msf2-emac.h" #define TYPE_MSF2_SOC "msf2-soc" #define MSF2_SOC(obj) OBJECT_CHECK(MSF2State, (obj), TYPE_MSF2_SOC) @@ -XXX,XX +XXX,XX @@ typedef struct MSF2State { MSF2SysregState sysreg; MSSTimerState timer; MSSSpiState spi[MSF2_NUM_SPIS]; + MSF2EmacState emac; } MSF2State; #endif diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/msf2-soc.c +++ b/hw/arm/msf2-soc.c @@ -XXX,XX +XXX,XX @@ /* * SmartFusion2 SoC emulation. * - * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * Copyright (c) 2017-2020 Subbaraya Sundeep <sundeep.lkml@gmail.com> * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ #define MSF2_TIMER_BASE 0x40004000 #define MSF2_SYSREG_BASE 0x40038000 +#define MSF2_EMAC_BASE 0x40041000 #define ENVM_BASE_ADDRESS 0x60000000 #define SRAM_BASE_ADDRESS 0x20000000 +#define MSF2_EMAC_IRQ 12 + #define MSF2_ENVM_MAX_SIZE (512 * KiB) /* @@ -XXX,XX +XXX,XX @@ static void m2sxxx_soc_initfn(Object *obj) sysbus_init_child_obj(obj, "spi[*]", &s->spi[i], sizeof(s->spi[i]), TYPE_MSS_SPI); } + + sysbus_init_child_obj(obj, "emac", &s->emac, sizeof(s->emac), + TYPE_MSS_EMAC); + if (nd_table[0].used) { + qemu_check_nic_model(&nd_table[0], TYPE_MSS_EMAC); + qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]); + } } static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) @@ -XXX,XX +XXX,XX @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) g_free(bus_name); } + dev = DEVICE(&s->emac); + object_property_set_link(OBJECT(&s->emac), OBJECT(get_system_memory()), + "ahb-bus", &error_abort); + object_property_set_bool(OBJECT(&s->emac), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, MSF2_EMAC_BASE); + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(armv7m, MSF2_EMAC_IRQ)); + /* Below devices are not modelled yet. */ create_unimplemented_device("i2c_0", 0x40002000, 0x1000); create_unimplemented_device("dma", 0x40003000, 0x1000); @@ -XXX,XX +XXX,XX @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("can", 0x40015000, 0x1000); create_unimplemented_device("rtc", 0x40017000, 0x1000); create_unimplemented_device("apb_config", 0x40020000, 0x10000); - create_unimplemented_device("emac", 0x40041000, 0x1000); create_unimplemented_device("usb", 0x40043000, 0x1000); } -- 2.20.1 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> In addition to simple serial test this patch uses ping to test the ethernet block modelled in SmartFusion2 SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1587048891-30493-4-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): """ uboot_url = ('https://raw.githubusercontent.com/' 'Subbaraya-Sundeep/qemu-test-binaries/' - 'fa030bd77a014a0b8e360d3b7011df89283a2f0b/u-boot') - uboot_hash = 'abba5d9c24cdd2d49cdc2a8aa92976cf20737eff' + 'fe371d32e50ca682391e1e70ab98c2942aeffb01/u-boot') + uboot_hash = 'cbb8cbab970f594bf6523b9855be209c08374ae2' uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash) spi_url = ('https://raw.githubusercontent.com/' 'Subbaraya-Sundeep/qemu-test-binaries/' - 'fa030bd77a014a0b8e360d3b7011df89283a2f0b/spi.bin') - spi_hash = '85f698329d38de63aea6e884a86fbde70890a78a' + 'fe371d32e50ca682391e1e70ab98c2942aeffb01/spi.bin') + spi_hash = '65523a1835949b6f4553be96dec1b6a38fb05501' spi_path = self.fetch_asset(spi_url, asset_hash=spi_hash) self.vm.set_console() @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): '-drive', 'file=' + spi_path + ',if=mtd,format=raw', '-no-reboot') self.vm.launch() - self.wait_for_console_pattern('init started: BusyBox') + self.wait_for_console_pattern('Enter \'help\' for a list') + + exec_command_and_wait_for_pattern(self, 'ifconfig eth0 10.0.2.15', + 'eth0: link becomes ready') + exec_command_and_wait_for_pattern(self, 'ping -c 3 10.0.2.2', + '3 packets transmitted, 3 packets received, 0% packet loss') def do_test_arm_raspi2(self, uart_id): """ -- 2.20.1 This object may be used to represent a clock inside a clock tree. A clock may be connected to another clock so that it receives update, through a callback, whenever the source/parent clock is updated. Although only the root clock of a clock tree controls the values (represented as periods) of all clocks in tree, each clock holds a local state containing the current value so that it can be fetched independently. It will allows us to fullfill migration requirements by migrating each clock independently of others. This is based on the original work of Frederic Konrad. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com [PMM: Use uint64_t rather than unsigned long long in trace events; the dtrace backend can't handle the latter] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/Makefile.objs | 1 + include/hw/clock.h | 216 ++++++++++++++++++++++++++++++++++++++++++ hw/core/clock.c | 130 +++++++++++++++++++++++++ hw/core/trace-events | 7 ++ 4 files changed, 354 insertions(+) create mode 100644 include/hw/clock.h create mode 100644 hw/core/clock.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-y += hotplug.o common-obj-y += vmstate-if.o # irq.o needed for qdev GPIO handling: common-obj-y += irq.o +common-obj-y += clock.o common-obj-$(CONFIG_SOFTMMU) += reset.o common-obj-$(CONFIG_SOFTMMU) += qdev-fw.o diff --git a/include/hw/clock.h b/include/hw/clock.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ +/* + * Hardware Clocks + * + * Copyright GreenSocs 2016-2020 + * + * Authors: + * Frederic Konrad + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef QEMU_HW_CLOCK_H +#define QEMU_HW_CLOCK_H + +#include "qom/object.h" +#include "qemu/queue.h" + +#define TYPE_CLOCK "clock" +#define CLOCK(obj) OBJECT_CHECK(Clock, (obj), TYPE_CLOCK) + +typedef void ClockCallback(void *opaque); + +/* + * clock store a value representing the clock's period in 2^-32ns unit. + * It can represent: + * + periods from 2^-32ns up to 4seconds + * + frequency from ~0.25Hz 2e10Ghz + * Resolution of frequency representation decreases with frequency: + * + at 100MHz, resolution is ~2mHz + * + at 1Ghz, resolution is ~0.2Hz + * + at 10Ghz, resolution is ~20Hz + */ +#define CLOCK_SECOND (1000000000llu << 32) + +/* + * macro helpers to convert to hertz / nanosecond + */ +#define CLOCK_PERIOD_FROM_NS(ns) ((ns) * (CLOCK_SECOND / 1000000000llu)) +#define CLOCK_PERIOD_TO_NS(per) ((per) / (CLOCK_SECOND / 1000000000llu)) +#define CLOCK_PERIOD_FROM_HZ(hz) (((hz) != 0) ? CLOCK_SECOND / (hz) : 0u) +#define CLOCK_PERIOD_TO_HZ(per) (((per) != 0) ? CLOCK_SECOND / (per) : 0u) + +/** + * Clock: + * @parent_obj: parent class + * @period: unsigned integer representing the period of the clock + * @canonical_path: clock path string cache (used for trace purpose) + * @callback: called when clock changes + * @callback_opaque: argument for @callback + * @source: source (or parent in clock tree) of the clock + * @children: list of clocks connected to this one (it is their source) + * @sibling: structure used to form a clock list + */ + +typedef struct Clock Clock; + +struct Clock { + /*< private >*/ + Object parent_obj; + + /* all fields are private and should not be modified directly */ + + /* fields */ + uint64_t period; + char *canonical_path; + ClockCallback *callback; + void *callback_opaque; + + /* Clocks are organized in a clock tree */ + Clock *source; + QLIST_HEAD(, Clock) children; + QLIST_ENTRY(Clock) sibling; +}; + +/** + * clock_setup_canonical_path: + * @clk: clock + * + * compute the canonical path of the clock (used by log messages) + */ +void clock_setup_canonical_path(Clock *clk); + +/** + * clock_set_callback: + * @clk: the clock to register the callback into + * @cb: the callback function + * @opaque: the argument to the callback + * + * Register a callback called on every clock update. + */ +void clock_set_callback(Clock *clk, ClockCallback *cb, void *opaque); + +/** + * clock_clear_callback: + * @clk: the clock to delete the callback from + * + * Unregister the callback registered with clock_set_callback. + */ +void clock_clear_callback(Clock *clk); + +/** + * clock_set_source: + * @clk: the clock. + * @src: the source clock + * + * Setup @src as the clock source of @clk. The current @src period + * value is also copied to @clk and its subtree but no callback is + * called. + * Further @src update will be propagated to @clk and its subtree. + */ +void clock_set_source(Clock *clk, Clock *src); + +/** + * clock_set: + * @clk: the clock to initialize. + * @value: the clock's value, 0 means unclocked + * + * Set the local cached period value of @clk to @value. + */ +void clock_set(Clock *clk, uint64_t value); + +static inline void clock_set_hz(Clock *clk, unsigned hz) +{ + clock_set(clk, CLOCK_PERIOD_FROM_HZ(hz)); +} + +static inline void clock_set_ns(Clock *clk, unsigned ns) +{ + clock_set(clk, CLOCK_PERIOD_FROM_NS(ns)); +} + +/** + * clock_propagate: + * @clk: the clock + * + * Propagate the clock period that has been previously configured using + * @clock_set(). This will update recursively all connected clocks. + * It is an error to call this function on a clock which has a source. + * Note: this function must not be called during device inititialization + * or migration. + */ +void clock_propagate(Clock *clk); + +/** + * clock_update: + * @clk: the clock to update. + * @value: the new clock's value, 0 means unclocked + * + * Update the @clk to the new @value. All connected clocks will be informed + * of this update. This is equivalent to call @clock_set() then + * @clock_propagate(). + */ +static inline void clock_update(Clock *clk, uint64_t value) +{ + clock_set(clk, value); + clock_propagate(clk); +} + +static inline void clock_update_hz(Clock *clk, unsigned hz) +{ + clock_update(clk, CLOCK_PERIOD_FROM_HZ(hz)); +} + +static inline void clock_update_ns(Clock *clk, unsigned ns) +{ + clock_update(clk, CLOCK_PERIOD_FROM_NS(ns)); +} + +/** + * clock_get: + * @clk: the clk to fetch the clock + * + * @return: the current period. + */ +static inline uint64_t clock_get(const Clock *clk) +{ + return clk->period; +} + +static inline unsigned clock_get_hz(Clock *clk) +{ + return CLOCK_PERIOD_TO_HZ(clock_get(clk)); +} + +static inline unsigned clock_get_ns(Clock *clk) +{ + return CLOCK_PERIOD_TO_NS(clock_get(clk)); +} + +/** + * clock_is_enabled: + * @clk: a clock + * + * @return: true if the clock is running. + */ +static inline bool clock_is_enabled(const Clock *clk) +{ + return clock_get(clk) != 0; +} + +static inline void clock_init(Clock *clk, uint64_t value) +{ + clock_set(clk, value); +} +static inline void clock_init_hz(Clock *clk, uint64_t value) +{ + clock_set_hz(clk, value); +} +static inline void clock_init_ns(Clock *clk, uint64_t value) +{ + clock_set_ns(clk, value); +} + +#endif /* QEMU_HW_CLOCK_H */ diff --git a/hw/core/clock.c b/hw/core/clock.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/clock.c @@ -XXX,XX +XXX,XX @@ +/* + * Hardware Clocks + * + * Copyright GreenSocs 2016-2020 + * + * Authors: + * Frederic Konrad + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "hw/clock.h" +#include "trace.h" + +#define CLOCK_PATH(_clk) (_clk->canonical_path) + +void clock_setup_canonical_path(Clock *clk) +{ + g_free(clk->canonical_path); + clk->canonical_path = object_get_canonical_path(OBJECT(clk)); +} + +void clock_set_callback(Clock *clk, ClockCallback *cb, void *opaque) +{ + clk->callback = cb; + clk->callback_opaque = opaque; +} + +void clock_clear_callback(Clock *clk) +{ + clock_set_callback(clk, NULL, NULL); +} + +void clock_set(Clock *clk, uint64_t period) +{ + trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_NS(clk->period), + CLOCK_PERIOD_TO_NS(period)); + clk->period = period; +} + +static void clock_propagate_period(Clock *clk, bool call_callbacks) +{ + Clock *child; + + QLIST_FOREACH(child, &clk->children, sibling) { + if (child->period != clk->period) { + child->period = clk->period; + trace_clock_update(CLOCK_PATH(child), CLOCK_PATH(clk), + CLOCK_PERIOD_TO_NS(clk->period), + call_callbacks); + if (call_callbacks && child->callback) { + child->callback(child->callback_opaque); + } + clock_propagate_period(child, call_callbacks); + } + } +} + +void clock_propagate(Clock *clk) +{ + assert(clk->source == NULL); + trace_clock_propagate(CLOCK_PATH(clk)); + clock_propagate_period(clk, true); +} + +void clock_set_source(Clock *clk, Clock *src) +{ + /* changing clock source is not supported */ + assert(!clk->source); + + trace_clock_set_source(CLOCK_PATH(clk), CLOCK_PATH(src)); + + clk->period = src->period; + QLIST_INSERT_HEAD(&src->children, clk, sibling); + clk->source = src; + clock_propagate_period(clk, false); +} + +static void clock_disconnect(Clock *clk) +{ + if (clk->source == NULL) { + return; + } + + trace_clock_disconnect(CLOCK_PATH(clk)); + + clk->source = NULL; + QLIST_REMOVE(clk, sibling); +} + +static void clock_initfn(Object *obj) +{ + Clock *clk = CLOCK(obj); + + QLIST_INIT(&clk->children); +} + +static void clock_finalizefn(Object *obj) +{ + Clock *clk = CLOCK(obj); + Clock *child, *next; + + /* clear our list of children */ + QLIST_FOREACH_SAFE(child, &clk->children, sibling, next) { + clock_disconnect(child); + } + + /* remove us from source's children list */ + clock_disconnect(clk); + + g_free(clk->canonical_path); +} + +static const TypeInfo clock_info = { + .name = TYPE_CLOCK, + .parent = TYPE_OBJECT, + .instance_size = sizeof(Clock), + .instance_init = clock_initfn, + .instance_finalize = clock_finalizefn, +}; + +static void clock_register_types(void) +{ + type_register_static(&clock_info); +} + +type_init(clock_register_types) diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ resettable_phase_exit_begin(void *obj, const char *objtype, unsigned count, int resettable_phase_exit_exec(void *obj, const char *objtype, int has_method) "obj=%p(%s) method=%d" resettable_phase_exit_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" resettable_transitional_function(void *obj, const char *objtype) "obj=%p(%s)" + +# clock.c +clock_set_source(const char *clk, const char *src) "'%s', src='%s'" +clock_disconnect(const char *clk) "'%s'" +clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', ns=%"PRIu64"->%"PRIu64 +clock_propagate(const char *clk) "'%s'" +clock_update(const char *clk, const char *src, uint64_t val, int cb) "'%s', src='%s', ns=%"PRIu64", cb=%d" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-3-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/Makefile.objs | 1 + include/hw/clock.h | 9 +++++++++ hw/core/clock-vmstate.c | 25 +++++++++++++++++++++++++ 3 files changed, 35 insertions(+) create mode 100644 hw/core/clock-vmstate.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_SOFTMMU) += null-machine.o common-obj-$(CONFIG_SOFTMMU) += loader.o common-obj-$(CONFIG_SOFTMMU) += machine-hmp-cmds.o common-obj-$(CONFIG_SOFTMMU) += numa.o +common-obj-$(CONFIG_SOFTMMU) += clock-vmstate.o obj-$(CONFIG_SOFTMMU) += machine-qmp-cmds.o common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ struct Clock { QLIST_ENTRY(Clock) sibling; }; +/* + * vmstate description entry to be added in device vmsd. + */ +extern const VMStateDescription vmstate_clock; +#define VMSTATE_CLOCK(field, state) \ + VMSTATE_CLOCK_V(field, state, 0) +#define VMSTATE_CLOCK_V(field, state, version) \ + VMSTATE_STRUCT_POINTER_V(field, state, version, vmstate_clock, Clock) + /** * clock_setup_canonical_path: * @clk: clock diff --git a/hw/core/clock-vmstate.c b/hw/core/clock-vmstate.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/clock-vmstate.c @@ -XXX,XX +XXX,XX @@ +/* + * Clock migration structure + * + * Copyright GreenSocs 2019-2020 + * + * Authors: + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "migration/vmstate.h" +#include "hw/clock.h" + +const VMStateDescription vmstate_clock = { + .name = "clock", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT64(period, Clock), + VMSTATE_END_OF_LIST() + } +}; -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Add functions to easily handle clocks with devices. Clock inputs and outputs should be used to handle clock propagation between devices. The API is very similar the GPIO API. This is based on the original work of Frederic Konrad. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200406135251.157596-4-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/Makefile.objs | 2 +- tests/Makefile.include | 1 + include/hw/qdev-clock.h | 104 +++++++++++++++++++++++++ include/hw/qdev-core.h | 12 +++ hw/core/qdev-clock.c | 168 ++++++++++++++++++++++++++++++++++++++++ hw/core/qdev.c | 12 +++ 6 files changed, 298 insertions(+), 1 deletion(-) create mode 100644 include/hw/qdev-clock.h create mode 100644 hw/core/qdev-clock.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-y += hotplug.o common-obj-y += vmstate-if.o # irq.o needed for qdev GPIO handling: common-obj-y += irq.o -common-obj-y += clock.o +common-obj-y += clock.o qdev-clock.o common-obj-$(CONFIG_SOFTMMU) += reset.o common-obj-$(CONFIG_SOFTMMU) += qdev-fw.o diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ tests/test-qdev-global-props$(EXESUF): tests/test-qdev-global-props.o \ hw/core/fw-path-provider.o \ hw/core/reset.o \ hw/core/vmstate-if.o \ + hw/core/clock.o hw/core/qdev-clock.o \ $(test-qapi-obj-y) tests/test-vmstate$(EXESUF): tests/test-vmstate.o \ migration/vmstate.o migration/vmstate-types.o migration/qemu-file.o \ diff --git a/include/hw/qdev-clock.h b/include/hw/qdev-clock.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/qdev-clock.h @@ -XXX,XX +XXX,XX @@ +/* + * Device's clock input and output + * + * Copyright GreenSocs 2016-2020 + * + * Authors: + * Frederic Konrad + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef QDEV_CLOCK_H +#define QDEV_CLOCK_H + +#include "hw/clock.h" + +/** + * qdev_init_clock_in: + * @dev: the device to add an input clock to + * @name: the name of the clock (can't be NULL). + * @callback: optional callback to be called on update or NULL. + * @opaque: argument for the callback + * @returns: a pointer to the newly added clock + * + * Add an input clock to device @dev as a clock named @name. + * This adds a child<> property. + * The callback will be called with @opaque as opaque parameter. + */ +Clock *qdev_init_clock_in(DeviceState *dev, const char *name, + ClockCallback *callback, void *opaque); + +/** + * qdev_init_clock_out: + * @dev: the device to add an output clock to + * @name: the name of the clock (can't be NULL). + * @returns: a pointer to the newly added clock + * + * Add an output clock to device @dev as a clock named @name. + * This adds a child<> property. + */ +Clock *qdev_init_clock_out(DeviceState *dev, const char *name); + +/** + * qdev_get_clock_in: + * @dev: the device which has the clock + * @name: the name of the clock (can't be NULL). + * @returns: a pointer to the clock + * + * Get the input clock @name from @dev or NULL if does not exist. + */ +Clock *qdev_get_clock_in(DeviceState *dev, const char *name); + +/** + * qdev_get_clock_out: + * @dev: the device which has the clock + * @name: the name of the clock (can't be NULL). + * @returns: a pointer to the clock + * + * Get the output clock @name from @dev or NULL if does not exist. + */ +Clock *qdev_get_clock_out(DeviceState *dev, const char *name); + +/** + * qdev_connect_clock_in: + * @dev: a device + * @name: the name of an input clock in @dev + * @source: the source clock (an output clock of another device for example) + * + * Set the source clock of input clock @name of device @dev to @source. + * @source period update will be propagated to @name clock. + */ +static inline void qdev_connect_clock_in(DeviceState *dev, const char *name, + Clock *source) +{ + clock_set_source(qdev_get_clock_in(dev, name), source); +} + +/** + * qdev_alias_clock: + * @dev: the device which has the clock + * @name: the name of the clock in @dev (can't be NULL) + * @alias_dev: the device to add the clock + * @alias_name: the name of the clock in @container + * @returns: a pointer to the clock + * + * Add a clock @alias_name in @alias_dev which is an alias of the clock @name + * in @dev. The direction _in_ or _out_ will the same as the original. + * An alias clock must not be modified or used by @alias_dev and should + * typically be only only for device composition purpose. + */ +Clock *qdev_alias_clock(DeviceState *dev, const char *name, + DeviceState *alias_dev, const char *alias_name); + +/** + * qdev_finalize_clocklist: + * @dev: the device being finalized + * + * Clear the clocklist from @dev. Only used internally in qdev. + */ +void qdev_finalize_clocklist(DeviceState *dev); + +#endif /* QDEV_CLOCK_H */ diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ struct NamedGPIOList { QLIST_ENTRY(NamedGPIOList) node; }; +typedef struct Clock Clock; +typedef struct NamedClockList NamedClockList; + +struct NamedClockList { + char *name; + Clock *clock; + bool output; + bool alias; + QLIST_ENTRY(NamedClockList) node; +}; + /** * DeviceState: * @realized: Indicates whether the device has been fully constructed. @@ -XXX,XX +XXX,XX @@ struct DeviceState { bool allow_unplug_during_migration; BusState *parent_bus; QLIST_HEAD(, NamedGPIOList) gpios; + QLIST_HEAD(, NamedClockList) clocks; QLIST_HEAD(, BusState) child_bus; int num_child_bus; int instance_id_alias; diff --git a/hw/core/qdev-clock.c b/hw/core/qdev-clock.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/qdev-clock.c @@ -XXX,XX +XXX,XX @@ +/* + * Device's clock input and output + * + * Copyright GreenSocs 2016-2020 + * + * Authors: + * Frederic Konrad + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-core.h" +#include "qapi/error.h" + +/* + * qdev_init_clocklist: + * Add a new clock in a device + */ +static NamedClockList *qdev_init_clocklist(DeviceState *dev, const char *name, + bool output, Clock *clk) +{ + NamedClockList *ncl; + + /* + * Clock must be added before realize() so that we can compute the + * clock's canonical path during device_realize(). + */ + assert(!dev->realized); + + /* + * The ncl structure is freed by qdev_finalize_clocklist() which will + * be called during @dev's device_finalize(). + */ + ncl = g_new0(NamedClockList, 1); + ncl->name = g_strdup(name); + ncl->output = output; + ncl->alias = (clk != NULL); + + /* + * Trying to create a clock whose name clashes with some other + * clock or property is a bug in the caller and we will abort(). + */ + if (clk == NULL) { + clk = CLOCK(object_new(TYPE_CLOCK)); + object_property_add_child(OBJECT(dev), name, OBJECT(clk), &error_abort); + if (output) { + /* + * Remove object_new()'s initial reference. + * Note that for inputs, the reference created by object_new() + * will be deleted in qdev_finalize_clocklist(). + */ + object_unref(OBJECT(clk)); + } + } else { + object_property_add_link(OBJECT(dev), name, + object_get_typename(OBJECT(clk)), + (Object **) &ncl->clock, + NULL, OBJ_PROP_LINK_STRONG, &error_abort); + } + + ncl->clock = clk; + + QLIST_INSERT_HEAD(&dev->clocks, ncl, node); + return ncl; +} + +void qdev_finalize_clocklist(DeviceState *dev) +{ + /* called by @dev's device_finalize() */ + NamedClockList *ncl, *ncl_next; + + QLIST_FOREACH_SAFE(ncl, &dev->clocks, node, ncl_next) { + QLIST_REMOVE(ncl, node); + if (!ncl->output && !ncl->alias) { + /* + * We kept a reference on the input clock to ensure it lives up to + * this point so we can safely remove the callback. + * It avoids having a callback to a deleted object if ncl->clock + * is still referenced somewhere else (eg: by a clock output). + */ + clock_clear_callback(ncl->clock); + object_unref(OBJECT(ncl->clock)); + } + g_free(ncl->name); + g_free(ncl); + } +} + +Clock *qdev_init_clock_out(DeviceState *dev, const char *name) +{ + NamedClockList *ncl; + + assert(name); + + ncl = qdev_init_clocklist(dev, name, true, NULL); + + return ncl->clock; +} + +Clock *qdev_init_clock_in(DeviceState *dev, const char *name, + ClockCallback *callback, void *opaque) +{ + NamedClockList *ncl; + + assert(name); + + ncl = qdev_init_clocklist(dev, name, false, NULL); + + if (callback) { + clock_set_callback(ncl->clock, callback, opaque); + } + return ncl->clock; +} + +static NamedClockList *qdev_get_clocklist(DeviceState *dev, const char *name) +{ + NamedClockList *ncl; + + QLIST_FOREACH(ncl, &dev->clocks, node) { + if (strcmp(name, ncl->name) == 0) { + return ncl; + } + } + + return NULL; +} + +Clock *qdev_get_clock_in(DeviceState *dev, const char *name) +{ + NamedClockList *ncl; + + assert(name); + + ncl = qdev_get_clocklist(dev, name); + assert(!ncl->output); + + return ncl->clock; +} + +Clock *qdev_get_clock_out(DeviceState *dev, const char *name) +{ + NamedClockList *ncl; + + assert(name); + + ncl = qdev_get_clocklist(dev, name); + assert(ncl->output); + + return ncl->clock; +} + +Clock *qdev_alias_clock(DeviceState *dev, const char *name, + DeviceState *alias_dev, const char *alias_name) +{ + NamedClockList *ncl; + + assert(name && alias_name); + + ncl = qdev_get_clocklist(dev, name); + + qdev_init_clocklist(alias_dev, alias_name, ncl->output, ncl->clock); + + return ncl->clock; +} diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/boards.h" #include "hw/sysbus.h" +#include "hw/qdev-clock.h" #include "migration/vmstate.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) DeviceClass *dc = DEVICE_GET_CLASS(dev); HotplugHandler *hotplug_ctrl; BusState *bus; + NamedClockList *ncl; Error *local_err = NULL; bool unattached_parent = false; static int unattached_count; @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) */ g_free(dev->canonical_path); dev->canonical_path = object_get_canonical_path(OBJECT(dev)); + QLIST_FOREACH(ncl, &dev->clocks, node) { + if (ncl->alias) { + continue; + } else { + clock_setup_canonical_path(ncl->clock); + } + } if (qdev_get_vmsd(dev)) { if (vmstate_register_with_alias_id(VMSTATE_IF(dev), @@ -XXX,XX +XXX,XX @@ static void device_initfn(Object *obj) dev->allow_unplug_during_migration = false; QLIST_INIT(&dev->gpios); + QLIST_INIT(&dev->clocks); } static void device_post_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void device_finalize(Object *obj) */ } + qdev_finalize_clocklist(dev); + /* Only send event if the device had been completely realized */ if (dev->pending_deleted_event) { g_assert(dev->canonical_path); -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Introduce a function and macro helpers to setup several clocks in a device from a static array description. An element of the array describes the clock (name and direction) as well as the related callback and an optional offset to store the created object pointer in the device state structure. The array must be terminated by a special element QDEV_CLOCK_END. This is based on the original work of Frederic Konrad. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-5-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-clock.h | 55 +++++++++++++++++++++++++++++++++++++++++ hw/core/qdev-clock.c | 17 +++++++++++++ 2 files changed, 72 insertions(+) diff --git a/include/hw/qdev-clock.h b/include/hw/qdev-clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-clock.h +++ b/include/hw/qdev-clock.h @@ -XXX,XX +XXX,XX @@ Clock *qdev_alias_clock(DeviceState *dev, const char *name, */ void qdev_finalize_clocklist(DeviceState *dev); +/** + * ClockPortInitElem: + * @name: name of the clock (can't be NULL) + * @output: indicates whether the clock is input or output + * @callback: for inputs, optional callback to be called on clock's update + * with device as opaque + * @offset: optional offset to store the ClockIn or ClockOut pointer in device + * state structure (0 means unused) + */ +struct ClockPortInitElem { + const char *name; + bool is_output; + ClockCallback *callback; + size_t offset; +}; + +#define clock_offset_value(devstate, field) \ + (offsetof(devstate, field) + \ + type_check(Clock *, typeof_field(devstate, field))) + +#define QDEV_CLOCK(out_not_in, devstate, field, cb) { \ + .name = (stringify(field)), \ + .is_output = out_not_in, \ + .callback = cb, \ + .offset = clock_offset_value(devstate, field), \ +} + +/** + * QDEV_CLOCK_(IN|OUT): + * @devstate: structure type. @dev argument of qdev_init_clocks below must be + * a pointer to that same type. + * @field: a field in @_devstate (must be Clock*) + * @callback: (for input only) callback (or NULL) to be called with the device + * state as argument + * + * The name of the clock will be derived from @field + */ +#define QDEV_CLOCK_IN(devstate, field, callback) \ + QDEV_CLOCK(false, devstate, field, callback) + +#define QDEV_CLOCK_OUT(devstate, field) \ + QDEV_CLOCK(true, devstate, field, NULL) + +#define QDEV_CLOCK_END { .name = NULL } + +typedef struct ClockPortInitElem ClockPortInitArray[]; + +/** + * qdev_init_clocks: + * @dev: the device to add clocks to + * @clocks: a QDEV_CLOCK_END-terminated array which contains the + * clocks information. + */ +void qdev_init_clocks(DeviceState *dev, const ClockPortInitArray clocks); + #endif /* QDEV_CLOCK_H */ diff --git a/hw/core/qdev-clock.c b/hw/core/qdev-clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev-clock.c +++ b/hw/core/qdev-clock.c @@ -XXX,XX +XXX,XX @@ Clock *qdev_init_clock_in(DeviceState *dev, const char *name, return ncl->clock; } +void qdev_init_clocks(DeviceState *dev, const ClockPortInitArray clocks) +{ + const struct ClockPortInitElem *elem; + + for (elem = &clocks[0]; elem->name != NULL; elem++) { + Clock **clkp; + /* offset cannot be inside the DeviceState part */ + assert(elem->offset > sizeof(DeviceState)); + clkp = (Clock **)(((void *) dev) + elem->offset); + if (elem->is_output) { + *clkp = qdev_init_clock_out(dev, elem->name); + } else { + *clkp = qdev_init_clock_in(dev, elem->name, elem->callback, dev); + } + } +} + static NamedClockList *qdev_get_clocklist(DeviceState *dev, const char *name) { NamedClockList *ncl; -- 2.20.1 Add the documentation about the clock inputs and outputs in devices. This is based on the original work of Frederic Konrad. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-6-damien.hedde@greensocs.com [PMM: Editing pass for minor grammar, style and Sphinx formatting fixes] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/devel/clocks.rst | 391 ++++++++++++++++++++++++++++++++++++++++++ docs/devel/index.rst | 1 + 2 files changed, 392 insertions(+) create mode 100644 docs/devel/clocks.rst diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ +Modelling a clock tree in QEMU +============================== + +What are clocks? +---------------- + +Clocks are QOM objects developed for the purpose of modelling the +distribution of clocks in QEMU. + +They allow us to model the clock distribution of a platform and detect +configuration errors in the clock tree such as badly configured PLL, clock +source selection or disabled clock. + +The object is *Clock* and its QOM name is ``clock`` (in C code, the macro +``TYPE_CLOCK``). + +Clocks are typically used with devices where they are used to model inputs +and outputs. They are created in a similar way to GPIOs. Inputs and outputs +of different devices can be connected together. + +In these cases a Clock object is a child of a Device object, but this +is not a requirement. Clocks can be independent of devices. For +example it is possible to create a clock outside of any device to +model the main clock source of a machine. + +Here is an example of clocks:: + + +---------+ +----------------------+ +--------------+ + | Clock 1 | | Device B | | Device C | + | | | +-------+ +-------+ | | +-------+ | + | |>>-+-->>|Clock 2| |Clock 3|>>--->>|Clock 6| | + +---------+ | | | (in) | | (out) | | | | (in) | | + | | +-------+ +-------+ | | +-------+ | + | | +-------+ | +--------------+ + | | |Clock 4|>> + | | | (out) | | +--------------+ + | | +-------+ | | Device D | + | | +-------+ | | +-------+ | + | | |Clock 5|>>--->>|Clock 7| | + | | | (out) | | | | (in) | | + | | +-------+ | | +-------+ | + | +----------------------+ | | + | | +-------+ | + +----------------------------->>|Clock 8| | + | | (in) | | + | +-------+ | + +--------------+ + +Clocks are defined in the ``include/hw/clock.h`` header and device +related functions are defined in the ``include/hw/qdev-clock.h`` +header. + +The clock state +--------------- + +The state of a clock is its period; it is stored as an integer +representing it in units of 2 :sup:`-32` ns. The special value of 0 is used to +represent the clock being inactive or gated. The clocks do not model +the signal itself (pin toggling) or other properties such as the duty +cycle. + +All clocks contain this state: outputs as well as inputs. This allows +the current period of a clock to be fetched at any time. When a clock +is updated, the value is immediately propagated to all connected +clocks in the tree. + +To ease interaction with clocks, helpers with a unit suffix are defined for +every clock state setter or getter. The suffixes are: + +- ``_ns`` for handling periods in nanoseconds +- ``_hz`` for handling frequencies in hertz + +The 0 period value is converted to 0 in hertz and vice versa. 0 always means +that the clock is disabled. + +Adding a new clock +------------------ + +Adding clocks to a device must be done during the init method of the Device +instance. + +To add an input clock to a device, the function ``qdev_init_clock_in()`` +must be used. It takes the name, a callback and an opaque parameter +for the callback (this will be explained in a following section). +Output is simpler; only the name is required. Typically:: + + qdev_init_clock_in(DEVICE(dev), "clk_in", clk_in_callback, dev); + qdev_init_clock_out(DEVICE(dev), "clk_out"); + +Both functions return the created Clock pointer, which should be saved in the +device's state structure for further use. + +These objects will be automatically deleted by the QOM reference mechanism. + +Note that it is possible to create a static array describing clock inputs and +outputs. The function ``qdev_init_clocks()`` must be called with the array as +parameter to initialize the clocks: it has the same behaviour as calling the +``qdev_init_clock_in/out()`` for each clock in the array. To ease the array +construction, some macros are defined in ``include/hw/qdev-clock.h``. +As an example, the following creates 2 clocks to a device: one input and one +output. + +.. code-block:: c + + /* device structure containing pointers to the clock objects */ + typedef struct MyDeviceState { + DeviceState parent_obj; + Clock *clk_in; + Clock *clk_out; + } MyDeviceState; + + /* + * callback for the input clock (see "Callback on input clock + * change" section below for more information). + */ + static void clk_in_callback(void *opaque); + + /* + * static array describing clocks: + * + a clock input named "clk_in", whose pointer is stored in + * the clk_in field of a MyDeviceState structure with callback + * clk_in_callback. + * + a clock output named "clk_out" whose pointer is stored in + * the clk_out field of a MyDeviceState structure. + */ + static const ClockPortInitArray mydev_clocks = { + QDEV_CLOCK_IN(MyDeviceState, clk_in, clk_in_callback), + QDEV_CLOCK_OUT(MyDeviceState, clk_out), + QDEV_CLOCK_END + }; + + /* device initialization function */ + static void mydev_init(Object *obj) + { + /* cast to MyDeviceState */ + MyDeviceState *mydev = MYDEVICE(obj); + /* create and fill the pointer fields in the MyDeviceState */ + qdev_init_clocks(mydev, mydev_clocks); + [...] + } + +An alternative way to create a clock is to simply call +``object_new(TYPE_CLOCK)``. In that case the clock will neither be an +input nor an output of a device. After the whole QOM hierarchy of the +clock has been set ``clock_setup_canonical_path()`` should be called. + +At creation, the period of the clock is 0: the clock is disabled. You can +change it using ``clock_set_ns()`` or ``clock_set_hz()``. + +Note that if you are creating a clock with a fixed period which will never +change (for example the main clock source of a board), then you'll have +nothing else to do. This value will be propagated to other clocks when +connecting the clocks together and devices will fetch the right value during +the first reset. + +Retrieving clocks from a device +------------------------------- + +``qdev_get_clock_in()`` and ``dev_get_clock_out()`` are available to +get the clock inputs or outputs of a device. For example: + +.. code-block:: c + + Clock *clk = qdev_get_clock_in(DEVICE(mydev), "clk_in"); + +or: + +.. code-block:: c + + Clock *clk = qdev_get_clock_out(DEVICE(mydev), "clk_out"); + +Connecting two clocks together +------------------------------ + +To connect two clocks together, use the ``clock_set_source()`` function. +Given two clocks ``clk1``, and ``clk2``, ``clock_set_source(clk2, clk1);`` +configures ``clk2`` to follow the ``clk1`` period changes. Every time ``clk1`` +is updated, ``clk2`` will be updated too. + +When connecting clock between devices, prefer using the +``qdev_connect_clock_in()`` function to set the source of an input +device clock. For example, to connect the input clock ``clk2`` of +``devB`` to the output clock ``clk1`` of ``devA``, do: + +.. code-block:: c + + qdev_connect_clock_in(devB, "clk2", qdev_get_clock_out(devA, "clk1")) + +We used ``qdev_get_clock_out()`` above, but any clock can drive an +input clock, even another input clock. The following diagram shows +some examples of connections. Note also that a clock can drive several +other clocks. + +:: + + +------------+ +--------------------------------------------------+ + | Device A | | Device B | + | | | +---------------------+ | + | | | | Device C | | + | +-------+ | | +-------+ | +-------+ +-------+ | +-------+ | + | |Clock 1|>>-->>|Clock 2|>>+-->>|Clock 3| |Clock 5|>>>>|Clock 6|>> + | | (out) | | | | (in) | | | | (in) | | (out) | | | (out) | | + | +-------+ | | +-------+ | | +-------+ +-------+ | +-------+ | + +------------+ | | +---------------------+ | + | | | + | | +--------------+ | + | | | Device D | | + | | | +-------+ | | + | +-->>|Clock 4| | | + | | | (in) | | | + | | +-------+ | | + | +--------------+ | + +--------------------------------------------------+ + +In the above example, when *Clock 1* is updated by *Device A*, three +clocks get the new clock period value: *Clock 2*, *Clock 3* and *Clock 4*. + +It is not possible to disconnect a clock or to change the clock connection +after it is connected. + +Unconnected input clocks +------------------------ + +A newly created input clock is disabled (period of 0). This means the +clock will be considered as disabled until the period is updated. If +the clock remains unconnected it will always keep its initial value +of 0. If this is not the desired behaviour, ``clock_set()``, +``clock_set_ns()`` or ``clock_set_hz()`` should be called on the Clock +object during device instance init. For example: + +.. code-block:: c + + clk = qdev_init_clock_in(DEVICE(dev), "clk-in", clk_in_callback, + dev); + /* set initial value to 10ns / 100MHz */ + clock_set_ns(clk, 10); + +Fetching clock frequency/period +------------------------------- + +To get the current state of a clock, use the functions ``clock_get()``, +``clock_get_ns()`` or ``clock_get_hz()``. + +It is also possible to register a callback on clock frequency changes. +Here is an example: + +.. code-block:: c + + void clock_callback(void *opaque) { + MyDeviceState *s = (MyDeviceState *) opaque; + /* + * 'opaque' is the argument passed to qdev_init_clock_in(); + * usually this will be the device state pointer. + */ + + /* do something with the new period */ + fprintf(stdout, "device new period is %" PRIu64 "ns\n", + clock_get_ns(dev->my_clk_input)); + } + +Changing a clock period +----------------------- + +A device can change its outputs using the ``clock_update()``, +``clock_update_ns()`` or ``clock_update_hz()`` function. It will trigger +updates on every connected input. + +For example, let's say that we have an output clock *clkout* and we +have a pointer to it in the device state because we did the following +in init phase: + +.. code-block:: c + + dev->clkout = qdev_init_clock_out(DEVICE(dev), "clkout"); + +Then at any time (apart from the cases listed below), it is possible to +change the clock value by doing: + +.. code-block:: c + + clock_update_hz(dev->clkout, 1000 * 1000 * 1000); /* 1GHz */ + +Because updating a clock may trigger any side effects through +connected clocks and their callbacks, this operation must be done +while holding the qemu io lock. + +For the same reason, one can update clocks only when it is allowed to have +side effects on other objects. In consequence, it is forbidden: + +* during migration, +* and in the enter phase of reset. + +Note that calling ``clock_update[_ns|_hz]()`` is equivalent to calling +``clock_set[_ns|_hz]()`` (with the same arguments) then +``clock_propagate()`` on the clock. Thus, setting the clock value can +be separated from triggering the side-effects. This is often required +to factorize code to handle reset and migration in devices. + +Aliasing clocks +--------------- + +Sometimes, one needs to forward, or inherit, a clock from another +device. Typically, when doing device composition, a device might +expose a sub-device's clock without interfering with it. The function +``qdev_alias_clock()`` can be used to achieve this behaviour. Note +that it is possible to expose the clock under a different name. +``qdev_alias_clock()`` works for both input and output clocks. + +For example, if device B is a child of device A, +``device_a_instance_init()`` may do something like this: + +.. code-block:: c + + void device_a_instance_init(Object *obj) + { + AState *A = DEVICE_A(obj); + BState *B; + /* create object B as child of A */ + [...] + qdev_alias_clock(B, "clk", A, "b_clk"); + /* + * Now A has a clock "b_clk" which is an alias to + * the clock "clk" of its child B. + */ + } + +This function does not return any clock object. The new clock has the +same direction (input or output) as the original one. This function +only adds a link to the existing clock. In the above example, object B +remains the only object allowed to use the clock and device A must not +try to change the clock period or set a callback to the clock. This +diagram describes the example with an input clock:: + + +--------------------------+ + | Device A | + | +--------------+ | + | | Device B | | + | | +-------+ | | + >>"b_clk">>>| "clk" | | | + | (in) | | (in) | | | + | | +-------+ | | + | +--------------+ | + +--------------------------+ + +Migration +--------- + +Clock state is not migrated automatically. Every device must handle its +clock migration. Alias clocks must not be migrated. + +To ensure clock states are restored correctly during migration, there +are two solutions. + +Clock states can be migrated by adding an entry into the device +vmstate description. You should use the ``VMSTATE_CLOCK`` macro for this. +This is typically used to migrate an input clock state. For example: + +.. code-block:: c + + MyDeviceState { + DeviceState parent_obj; + [...] /* some fields */ + Clock *clk; + }; + + VMStateDescription my_device_vmstate = { + .name = "my_device", + .fields = (VMStateField[]) { + [...], /* other migrated fields */ + VMSTATE_CLOCK(clk, MyDeviceState), + VMSTATE_END_OF_LIST() + } + }; + +The second solution is to restore the clock state using information already +at our disposal. This can be used to restore output clock states using the +device state. The functions ``clock_set[_ns|_hz]()`` can be used during the +``post_load()`` migration callback. + +When adding clock support to an existing device, if you care about +migration compatibility you will need to be careful, as simply adding +a ``VMSTATE_CLOCK()`` line will break compatibility. Instead, you can +put the ``VMSTATE_CLOCK()`` line into a vmstate subsection with a +suitable ``needed`` function, and use ``clock_set()`` in a +``pre_load()`` function to set the default value that will be used if +the source virtual machine in the migration does not send the clock +state. + +Care should be taken not to use ``clock_update[_ns|_hz]()`` or +``clock_propagate()`` during the whole migration procedure because it +will trigger side effects to other devices in an unknown state. diff --git a/docs/devel/index.rst b/docs/devel/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/index.rst +++ b/docs/devel/index.rst @@ -XXX,XX +XXX,XX @@ Contents: bitops reset s390-dasd-ipl + clocks -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Add some clocks to zynq_slcr + the main input clock (ps_clk) + the reference clock outputs for each uart (uart0 & 1) This commit also transitional the slcr to multi-phase reset as it is required to initialize the clocks correctly. The clock frequencies are computed using the internal pll & uart configuration registers and the input ps_clk frequency. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200406135251.157596-7-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/zynq_slcr.c | 172 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 168 insertions(+), 4 deletions(-) diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/zynq_slcr.c +++ b/hw/misc/zynq_slcr.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qemu/module.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #ifndef ZYNQ_SLCR_ERR_DEBUG #define ZYNQ_SLCR_ERR_DEBUG 0 @@ -XXX,XX +XXX,XX @@ REG32(LOCKSTA, 0x00c) REG32(ARM_PLL_CTRL, 0x100) REG32(DDR_PLL_CTRL, 0x104) REG32(IO_PLL_CTRL, 0x108) +/* fields for [ARM|DDR|IO]_PLL_CTRL registers */ + FIELD(xxx_PLL_CTRL, PLL_RESET, 0, 1) + FIELD(xxx_PLL_CTRL, PLL_PWRDWN, 1, 1) + FIELD(xxx_PLL_CTRL, PLL_BYPASS_QUAL, 3, 1) + FIELD(xxx_PLL_CTRL, PLL_BYPASS_FORCE, 4, 1) + FIELD(xxx_PLL_CTRL, PLL_FPDIV, 12, 7) REG32(PLL_STATUS, 0x10c) REG32(ARM_PLL_CFG, 0x110) REG32(DDR_PLL_CFG, 0x114) @@ -XXX,XX +XXX,XX @@ REG32(SMC_CLK_CTRL, 0x148) REG32(LQSPI_CLK_CTRL, 0x14c) REG32(SDIO_CLK_CTRL, 0x150) REG32(UART_CLK_CTRL, 0x154) + FIELD(UART_CLK_CTRL, CLKACT0, 0, 1) + FIELD(UART_CLK_CTRL, CLKACT1, 1, 1) + FIELD(UART_CLK_CTRL, SRCSEL, 4, 2) + FIELD(UART_CLK_CTRL, DIVISOR, 8, 6) REG32(SPI_CLK_CTRL, 0x158) REG32(CAN_CLK_CTRL, 0x15c) REG32(CAN_MIOCLK_CTRL, 0x160) @@ -XXX,XX +XXX,XX @@ typedef struct ZynqSLCRState { MemoryRegion iomem; uint32_t regs[ZYNQ_SLCR_NUM_REGS]; + + Clock *ps_clk; + Clock *uart0_ref_clk; + Clock *uart1_ref_clk; } ZynqSLCRState; -static void zynq_slcr_reset(DeviceState *d) +/* + * return the output frequency of ARM/DDR/IO pll + * using input frequency and PLL_CTRL register + */ +static uint64_t zynq_slcr_compute_pll(uint64_t input, uint32_t ctrl_reg) { - ZynqSLCRState *s = ZYNQ_SLCR(d); + uint32_t mult = ((ctrl_reg & R_xxx_PLL_CTRL_PLL_FPDIV_MASK) >> + R_xxx_PLL_CTRL_PLL_FPDIV_SHIFT); + + /* first, check if pll is bypassed */ + if (ctrl_reg & R_xxx_PLL_CTRL_PLL_BYPASS_FORCE_MASK) { + return input; + } + + /* is pll disabled ? */ + if (ctrl_reg & (R_xxx_PLL_CTRL_PLL_RESET_MASK | + R_xxx_PLL_CTRL_PLL_PWRDWN_MASK)) { + return 0; + } + + /* frequency multiplier -> period division */ + return input / mult; +} + +/* + * return the output period of a clock given: + * + the periods in an array corresponding to input mux selector + * + the register xxx_CLK_CTRL value + * + enable bit index in ctrl register + * + * This function makes the assumption that the ctrl_reg value is organized as + * follows: + * + bits[13:8] clock frequency divisor + * + bits[5:4] clock mux selector (index in array) + * + bits[index] clock enable + */ +static uint64_t zynq_slcr_compute_clock(const uint64_t periods[], + uint32_t ctrl_reg, + unsigned index) +{ + uint32_t srcsel = extract32(ctrl_reg, 4, 2); /* bits [5:4] */ + uint32_t divisor = extract32(ctrl_reg, 8, 6); /* bits [13:8] */ + + /* first, check if clock is disabled */ + if (((ctrl_reg >> index) & 1u) == 0) { + return 0; + } + + /* + * according to the Zynq technical ref. manual UG585 v1.12.2 in + * Clocks chapter, section 25.10.1 page 705: + * "The 6-bit divider provides a divide range of 1 to 63" + * We follow here what is implemented in linux kernel and consider + * the 0 value as a bypass (no division). + */ + /* frequency divisor -> period multiplication */ + return periods[srcsel] * (divisor ? divisor : 1u); +} + +/* + * macro helper around zynq_slcr_compute_clock to avoid repeating + * the register name. + */ +#define ZYNQ_COMPUTE_CLK(state, plls, reg, enable_field) \ + zynq_slcr_compute_clock((plls), (state)->regs[reg], \ + reg ## _ ## enable_field ## _SHIFT) + +/** + * Compute and set the ouputs clocks periods. + * But do not propagate them further. Connected clocks + * will not receive any updates (See zynq_slcr_compute_clocks()) + */ +static void zynq_slcr_compute_clocks(ZynqSLCRState *s) +{ + uint64_t ps_clk = clock_get(s->ps_clk); + + /* consider outputs clocks are disabled while in reset */ + if (device_is_in_reset(DEVICE(s))) { + ps_clk = 0; + } + + uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]); + uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]); + uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]); + + uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll}; + + /* compute uartX reference clocks */ + clock_set(s->uart0_ref_clk, + ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0)); + clock_set(s->uart1_ref_clk, + ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1)); +} + +/** + * Propagate the outputs clocks. + * zynq_slcr_compute_clocks() should have been called before + * to configure them. + */ +static void zynq_slcr_propagate_clocks(ZynqSLCRState *s) +{ + clock_propagate(s->uart0_ref_clk); + clock_propagate(s->uart1_ref_clk); +} + +static void zynq_slcr_ps_clk_callback(void *opaque) +{ + ZynqSLCRState *s = (ZynqSLCRState *) opaque; + zynq_slcr_compute_clocks(s); + zynq_slcr_propagate_clocks(s); +} + +static void zynq_slcr_reset_init(Object *obj, ResetType type) +{ + ZynqSLCRState *s = ZYNQ_SLCR(obj); int i; DB_PRINT("RESET\n"); @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset(DeviceState *d) s->regs[R_DDRIOB + 12] = 0x00000021; } +static void zynq_slcr_reset_hold(Object *obj) +{ + ZynqSLCRState *s = ZYNQ_SLCR(obj); + + /* will disable all output clocks */ + zynq_slcr_compute_clocks(s); + zynq_slcr_propagate_clocks(s); +} + +static void zynq_slcr_reset_exit(Object *obj) +{ + ZynqSLCRState *s = ZYNQ_SLCR(obj); + + /* will compute output clocks according to ps_clk and registers */ + zynq_slcr_compute_clocks(s); + zynq_slcr_propagate_clocks(s); +} static bool zynq_slcr_check_offset(hwaddr offset, bool rnw) { @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_write(void *opaque, hwaddr offset, qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); } break; + case R_IO_PLL_CTRL: + case R_ARM_PLL_CTRL: + case R_DDR_PLL_CTRL: + case R_UART_CLK_CTRL: + zynq_slcr_compute_clocks(s); + zynq_slcr_propagate_clocks(s); + break; } } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps slcr_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; +static const ClockPortInitArray zynq_slcr_clocks = { + QDEV_CLOCK_IN(ZynqSLCRState, ps_clk, zynq_slcr_ps_clk_callback), + QDEV_CLOCK_OUT(ZynqSLCRState, uart0_ref_clk), + QDEV_CLOCK_OUT(ZynqSLCRState, uart1_ref_clk), + QDEV_CLOCK_END +}; + static void zynq_slcr_init(Object *obj) { ZynqSLCRState *s = ZYNQ_SLCR(obj); @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_init(Object *obj) memory_region_init_io(&s->iomem, obj, &slcr_ops, s, "slcr", ZYNQ_SLCR_MMIO_SIZE); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); + + qdev_init_clocks(DEVICE(obj), zynq_slcr_clocks); } static const VMStateDescription vmstate_zynq_slcr = { .name = "zynq_slcr", - .version_id = 2, + .version_id = 3, .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, ZynqSLCRState, ZYNQ_SLCR_NUM_REGS), + VMSTATE_CLOCK_V(ps_clk, ZynqSLCRState, 3), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_zynq_slcr = { static void zynq_slcr_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); dc->vmsd = &vmstate_zynq_slcr; - dc->reset = zynq_slcr_reset; + rc->phases.enter = zynq_slcr_reset_init; + rc->phases.hold = zynq_slcr_reset_hold; + rc->phases.exit = zynq_slcr_reset_exit; } static const TypeInfo zynq_slcr_info = { -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Switch the cadence uart to multi-phase reset and add the reference clock input. The input clock frequency is added to the migration structure. The reference clock controls the baudrate generation. If it disabled, any input characters and events are ignored. If this clock remains unconnected, the uart behaves as before (it default to a 50MHz ref clock). Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/cadence_uart.h | 1 + hw/char/cadence_uart.c | 73 +++++++++++++++++++++++++++++----- hw/char/trace-events | 3 ++ 3 files changed, 67 insertions(+), 10 deletions(-) diff --git a/include/hw/char/cadence_uart.h b/include/hw/char/cadence_uart.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/cadence_uart.h +++ b/include/hw/char/cadence_uart.h @@ -XXX,XX +XXX,XX @@ typedef struct { CharBackend chr; qemu_irq irq; QEMUTimer *fifo_trigger_handle; + Clock *refclk; } CadenceUARTState; static inline DeviceState *cadence_uart_create(hwaddr addr, diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "hw/char/cadence_uart.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "trace.h" #ifdef CADENCE_UART_ERR_DEBUG #define DB_PRINT(...) do { \ @@ -XXX,XX +XXX,XX @@ #define LOCAL_LOOPBACK (0x2 << UART_MR_CHMODE_SH) #define REMOTE_LOOPBACK (0x3 << UART_MR_CHMODE_SH) -#define UART_INPUT_CLK 50000000 +#define UART_DEFAULT_REF_CLK (50 * 1000 * 1000) #define R_CR (0x00/4) #define R_MR (0x04/4) @@ -XXX,XX +XXX,XX @@ static void uart_send_breaks(CadenceUARTState *s) static void uart_parameters_setup(CadenceUARTState *s) { QEMUSerialSetParams ssp; - unsigned int baud_rate, packet_size; + unsigned int baud_rate, packet_size, input_clk; + input_clk = clock_get_hz(s->refclk); - baud_rate = (s->r[R_MR] & UART_MR_CLKS) ? - UART_INPUT_CLK / 8 : UART_INPUT_CLK; + baud_rate = (s->r[R_MR] & UART_MR_CLKS) ? input_clk / 8 : input_clk; + baud_rate /= (s->r[R_BRGR] * (s->r[R_BDIV] + 1)); + trace_cadence_uart_baudrate(baud_rate); + + ssp.speed = baud_rate; - ssp.speed = baud_rate / (s->r[R_BRGR] * (s->r[R_BDIV] + 1)); packet_size = 1; switch (s->r[R_MR] & UART_MR_PAR) { @@ -XXX,XX +XXX,XX @@ static void uart_parameters_setup(CadenceUARTState *s) } packet_size += ssp.data_bits + ssp.stop_bits; + if (ssp.speed == 0) { + /* + * Avoid division-by-zero below. + * TODO: find something better + */ + ssp.speed = 1; + } s->char_tx_time = (NANOSECONDS_PER_SECOND / ssp.speed) * packet_size; qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); } @@ -XXX,XX +XXX,XX @@ static void uart_receive(void *opaque, const uint8_t *buf, int size) CadenceUARTState *s = opaque; uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE; + /* ignore characters when unclocked or in reset */ + if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + return; + } + if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) { uart_write_rx_fifo(opaque, buf, size); } @@ -XXX,XX +XXX,XX @@ static void uart_event(void *opaque, QEMUChrEvent event) CadenceUARTState *s = opaque; uint8_t buf = '\0'; + /* ignore characters when unclocked or in reset */ + if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + return; + } + if (event == CHR_EVENT_BREAK) { uart_write_rx_fifo(opaque, &buf, 1); } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps uart_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void cadence_uart_reset(DeviceState *dev) +static void cadence_uart_reset_init(Object *obj, ResetType type) { - CadenceUARTState *s = CADENCE_UART(dev); + CadenceUARTState *s = CADENCE_UART(obj); s->r[R_CR] = 0x00000128; s->r[R_IMR] = 0; @@ -XXX,XX +XXX,XX @@ static void cadence_uart_reset(DeviceState *dev) s->r[R_BRGR] = 0x0000028B; s->r[R_BDIV] = 0x0000000F; s->r[R_TTRIG] = 0x00000020; +} + +static void cadence_uart_reset_hold(Object *obj) +{ + CadenceUARTState *s = CADENCE_UART(obj); uart_rx_reset(s); uart_tx_reset(s); @@ -XXX,XX +XXX,XX @@ static void cadence_uart_realize(DeviceState *dev, Error **errp) uart_event, NULL, s, NULL, true); } +static void cadence_uart_refclk_update(void *opaque) +{ + CadenceUARTState *s = opaque; + + /* recompute uart's speed on clock change */ + uart_parameters_setup(s); +} + static void cadence_uart_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cadence_uart_init(Object *obj) sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->refclk = qdev_init_clock_in(DEVICE(obj), "refclk", + cadence_uart_refclk_update, s); + /* initialize the frequency in case the clock remains unconnected */ + clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK); + s->char_tx_time = (NANOSECONDS_PER_SECOND / 9600) * 10; } +static int cadence_uart_pre_load(void *opaque) +{ + CadenceUARTState *s = opaque; + + /* the frequency will be overriden if the refclk field is present */ + clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK); + return 0; +} + static int cadence_uart_post_load(void *opaque, int version_id) { CadenceUARTState *s = opaque; @@ -XXX,XX +XXX,XX @@ static int cadence_uart_post_load(void *opaque, int version_id) static const VMStateDescription vmstate_cadence_uart = { .name = "cadence_uart", - .version_id = 2, + .version_id = 3, .minimum_version_id = 2, + .pre_load = cadence_uart_pre_load, .post_load = cadence_uart_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(r, CadenceUARTState, CADENCE_UART_R_MAX), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_cadence_uart = { VMSTATE_UINT32(tx_count, CadenceUARTState), VMSTATE_UINT32(rx_wpos, CadenceUARTState), VMSTATE_TIMER_PTR(fifo_trigger_handle, CadenceUARTState), + VMSTATE_CLOCK_V(refclk, CadenceUARTState, 3), VMSTATE_END_OF_LIST() - } + }, }; static Property cadence_uart_properties[] = { @@ -XXX,XX +XXX,XX @@ static Property cadence_uart_properties[] = { static void cadence_uart_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); dc->realize = cadence_uart_realize; dc->vmsd = &vmstate_cadence_uart; - dc->reset = cadence_uart_reset; + rc->phases.enter = cadence_uart_reset_init; + rc->phases.hold = cadence_uart_reset_hold; device_class_set_props(dc, cadence_uart_properties); } diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ exynos_uart_wo_read(uint32_t channel, const char *name, uint32_t reg) "UART%d: T exynos_uart_rxsize(uint32_t channel, uint32_t size) "UART%d: Rx FIFO size: %d" exynos_uart_channel_error(uint32_t channel) "Wrong UART channel number: %d" exynos_uart_rx_timeout(uint32_t channel, uint32_t stat, uint32_t intsp) "UART%d: Rx timeout stat=0x%x intsp=0x%x" + +# hw/char/cadence_uart.c +cadence_uart_baudrate(unsigned baudrate) "baudrate %u" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Add the connection between the slcr's output clocks and the uarts inputs. Also add the main board clock 'ps_clk', which is hard-coded to 33.33MHz (the default frequency). This clock is used to feed the slcr's input clock. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-9-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 57 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/cadence_uart.h" #include "hw/net/cadence_gem.h" #include "hw/cpu/a9mpcore.h" +#include "hw/qdev-clock.h" +#include "sysemu/reset.h" + +#define TYPE_ZYNQ_MACHINE MACHINE_TYPE_NAME("xilinx-zynq-a9") +#define ZYNQ_MACHINE(obj) \ + OBJECT_CHECK(ZynqMachineState, (obj), TYPE_ZYNQ_MACHINE) + +/* board base frequency: 33.333333 MHz */ +#define PS_CLK_FREQUENCY (100 * 1000 * 1000 / 3) #define NUM_SPI_FLASHES 4 #define NUM_QSPI_FLASHES 2 @@ -XXX,XX +XXX,XX @@ static const int dma_irqs[8] = { 0xe3401000 + ARMV7_IMM16(extract32((val), 16, 16)), /* movt r1 ... */ \ 0xe5801000 + (addr) +typedef struct ZynqMachineState { + MachineState parent; + Clock *ps_clk; +} ZynqMachineState; + static void zynq_write_board_setup(ARMCPU *cpu, const struct arm_boot_info *info) { @@ -XXX,XX +XXX,XX @@ static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq, static void zynq_init(MachineState *machine) { + ZynqMachineState *zynq_machine = ZYNQ_MACHINE(machine); ARMCPU *cpu; MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *ocm_ram = g_new(MemoryRegion, 1); - DeviceState *dev; + DeviceState *dev, *slcr; SysBusDevice *busdev; qemu_irq pic[64]; int n; @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) 1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa, 0); - dev = qdev_create(NULL, "xilinx,zynq_slcr"); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000); + /* Create slcr, keep a pointer to connect clocks */ + slcr = qdev_create(NULL, "xilinx,zynq_slcr"); + qdev_init_nofail(slcr); + sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000); + + /* Create the main clock source, and feed slcr with it */ + zynq_machine->ps_clk = CLOCK(object_new(TYPE_CLOCK)); + object_property_add_child(OBJECT(zynq_machine), "ps_clk", + OBJECT(zynq_machine->ps_clk), &error_abort); + object_unref(OBJECT(zynq_machine->ps_clk)); + clock_set_hz(zynq_machine->ps_clk, PS_CLK_FREQUENCY); + qdev_connect_clock_in(slcr, "ps_clk", zynq_machine->ps_clk); dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV); qdev_prop_set_uint32(dev, "num-cpu", 1); @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]); sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]); - cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0)); - cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1)); + dev = cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0)); + qdev_connect_clock_in(dev, "refclk", + qdev_get_clock_out(slcr, "uart0_ref_clk")); + dev = cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1)); + qdev_connect_clock_in(dev, "refclk", + qdev_get_clock_out(slcr, "uart1_ref_clk")); sysbus_create_varargs("cadence_ttc", 0xF8001000, pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL); @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) arm_load_kernel(ARM_CPU(first_cpu), machine, &zynq_binfo); } -static void zynq_machine_init(MachineClass *mc) +static void zynq_machine_class_init(ObjectClass *oc, void *data) { + MachineClass *mc = MACHINE_CLASS(oc); mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9"; mc->init = zynq_init; mc->max_cpus = 1; @@ -XXX,XX +XXX,XX @@ static void zynq_machine_init(MachineClass *mc) mc->default_ram_id = "zynq.ext_ram"; } -DEFINE_MACHINE("xilinx-zynq-a9", zynq_machine_init) +static const TypeInfo zynq_machine_type = { + .name = TYPE_ZYNQ_MACHINE, + .parent = TYPE_MACHINE, + .class_init = zynq_machine_class_init, + .instance_size = sizeof(ZynqMachineState), +}; + +static void zynq_machine_register_types(void) +{ + type_register_static(&zynq_machine_type); +} + +type_init(zynq_machine_register_types) -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This prints the clocks attached to a DeviceState when using "info qtree" monitor command. For every clock, it displays the direction, the name and if the clock is forwarded. For input clock, it displays also the frequency. This is based on the original work of Frederic Konrad. Here follows a sample of `info qtree` output on xilinx_zynq machine after linux boot with only one uart clocked: > bus: main-system-bus > type System > [...] > dev: cadence_uart, id "" > gpio-out "sysbus-irq" 1 > clock-in "refclk" freq_hz=0.000000e+00 > chardev = "" > mmio 00000000e0001000/0000000000001000 > dev: cadence_uart, id "" > gpio-out "sysbus-irq" 1 > clock-in "refclk" freq_hz=1.375661e+07 > chardev = "serial0" > mmio 00000000e0000000/0000000000001000 > [...] > dev: xilinx,zynq_slcr, id "" > clock-out "uart1_ref_clk" freq_hz=0.000000e+00 > clock-out "uart0_ref_clk" freq_hz=1.375661e+07 > clock-in "ps_clk" freq_hz=3.333333e+07 > mmio 00000000f8000000/0000000000001000 Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-10-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- qdev-monitor.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/qdev-monitor.c b/qdev-monitor.c index XXXXXXX..XXXXXXX 100644 --- a/qdev-monitor.c +++ b/qdev-monitor.c @@ -XXX,XX +XXX,XX @@ #include "migration/misc.h" #include "migration/migration.h" #include "qemu/cutils.h" +#include "hw/clock.h" /* * Aliases were a bad idea from the start. Let's keep them @@ -XXX,XX +XXX,XX @@ static void qdev_print(Monitor *mon, DeviceState *dev, int indent) ObjectClass *class; BusState *child; NamedGPIOList *ngl; + NamedClockList *ncl; qdev_printf("dev: %s, id \"%s\"\n", object_get_typename(OBJECT(dev)), dev->id ? dev->id : ""); @@ -XXX,XX +XXX,XX @@ static void qdev_print(Monitor *mon, DeviceState *dev, int indent) ngl->num_out); } } + QLIST_FOREACH(ncl, &dev->clocks, node) { + qdev_printf("clock-%s%s \"%s\" freq_hz=%e\n", + ncl->output ? "out" : "in", + ncl->alias ? " (alias)" : "", + ncl->name, + CLOCK_PERIOD_TO_HZ(1.0 * clock_get(ncl->clock))); + } class = object_get_class(OBJECT(dev)); do { qdev_print_props(mon, dev, DEVICE_CLASS(class)->props_, indent); -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Setup the ADMA with 128bit bus-width. This matters when FIXED BURST mode is used. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200417153800.27399-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-versal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_admas(Versal *s, qemu_irq *pic) dev = qdev_create(NULL, "xlnx.zdma"); s->lpd.iou.adma[i] = SYS_BUS_DEVICE(dev); + object_property_set_int(OBJECT(s->lpd.iou.adma[i]), 128, "bus-width", + &error_abort); object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); qdev_init_nofail(dev); -- 2.20.1 From: Ramon Fried <rfried.dev@gmail.com> Wraparound of TX descriptor cyclic buffer only updated the low 32 bits of the descriptor. Fix that by checking if we're working with 64bit descriptors. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200417171736.441607-1-rfried.dev@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/cadence_gem.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -XXX,XX +XXX,XX @@ static void gem_transmit(CadenceGEMState *s) /* read next descriptor */ if (tx_desc_get_wrap(desc)) { tx_desc_set_last(desc); - packet_desc_addr = s->regs[GEM_TXQBASE]; + + if (s->regs[GEM_DMACFG] & GEM_DMACFG_ADDR_64B) { + packet_desc_addr = s->regs[GEM_TBQPH]; + packet_desc_addr <<= 32; + } else { + packet_desc_addr = 0; + } + packet_desc_addr |= s->regs[GEM_TXQBASE]; } else { packet_desc_addr += 4 * gem_get_desc_len(s, false); } -- 2.20.1 From: Ramon Fried <rfried.dev@gmail.com> The RX ring descriptors control field is used for setting SOF and EOF (start of frame and end of frame). The SOF and EOF weren't cleared from the previous descriptors, causing inconsistencies in ring buffer. Fix that by clearing the control field of every descriptors we're processing. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200418085145.489726-1-rfried.dev@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/cadence_gem.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -XXX,XX +XXX,XX @@ static inline void rx_desc_set_sof(uint32_t *desc) desc[1] |= DESC_1_RX_SOF; } +static inline void rx_desc_clear_control(uint32_t *desc) +{ + desc[1] = 0; +} + static inline void rx_desc_set_eof(uint32_t *desc) { desc[1] |= DESC_1_RX_EOF; @@ -XXX,XX +XXX,XX @@ static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size) rxbuf_ptr += MIN(bytes_to_copy, rxbufsize); bytes_to_copy -= MIN(bytes_to_copy, rxbufsize); + rx_desc_clear_control(s->rx_desc[q]); + /* Update the descriptor. */ if (first_desc) { rx_desc_set_sof(s->rx_desc[q]); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These instructions are often used in glibc's string routines. They were the final uses of the 32-bit at a time neon helpers. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200418162808.4680-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 27 ++-- target/arm/translate.h | 5 + target/arm/neon_helper.c | 24 ---- target/arm/translate-a64.c | 64 +++------- target/arm/translate.c | 256 +++++++++++++++++++++++++++++++------ target/arm/vec_helper.c | 25 ++++ 6 files changed, 278 insertions(+), 123 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(neon_hsub_u16, i32, i32, i32) DEF_HELPER_2(neon_hsub_s32, s32, s32, s32) DEF_HELPER_2(neon_hsub_u32, i32, i32, i32) -DEF_HELPER_2(neon_cgt_u8, i32, i32, i32) -DEF_HELPER_2(neon_cgt_s8, i32, i32, i32) -DEF_HELPER_2(neon_cgt_u16, i32, i32, i32) -DEF_HELPER_2(neon_cgt_s16, i32, i32, i32) -DEF_HELPER_2(neon_cgt_u32, i32, i32, i32) -DEF_HELPER_2(neon_cgt_s32, i32, i32, i32) -DEF_HELPER_2(neon_cge_u8, i32, i32, i32) -DEF_HELPER_2(neon_cge_s8, i32, i32, i32) -DEF_HELPER_2(neon_cge_u16, i32, i32, i32) -DEF_HELPER_2(neon_cge_s16, i32, i32, i32) -DEF_HELPER_2(neon_cge_u32, i32, i32, i32) -DEF_HELPER_2(neon_cge_s32, i32, i32, i32) - DEF_HELPER_2(neon_pmin_u8, i32, i32, i32) DEF_HELPER_2(neon_pmin_s8, i32, i32, i32) DEF_HELPER_2(neon_pmin_u16, i32, i32, i32) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(neon_mul_u16, i32, i32, i32) DEF_HELPER_2(neon_tst_u8, i32, i32, i32) DEF_HELPER_2(neon_tst_u16, i32, i32, i32) DEF_HELPER_2(neon_tst_u32, i32, i32, i32) -DEF_HELPER_2(neon_ceq_u8, i32, i32, i32) -DEF_HELPER_2(neon_ceq_u16, i32, i32, i32) -DEF_HELPER_2(neon_ceq_u32, i32, i32, i32) DEF_HELPER_1(neon_clz_u8, i32, i32) DEF_HELPER_1(neon_clz_u16, i32, i32) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(frint64_s, TCG_CALL_NO_RWG, f32, f32, ptr) DEF_HELPER_FLAGS_2(frint32_d, TCG_CALL_NO_RWG, f64, f64, ptr) DEF_HELPER_FLAGS_2(frint64_d, TCG_CALL_NO_RWG, f64, f64, ptr) +DEF_HELPER_FLAGS_3(gvec_ceq0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_ceq0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_clt0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_clt0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_cle0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_cle0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_cgt0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_cgt0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_cge0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(gvec_cge0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) + DEF_HELPER_FLAGS_4(gvec_sshl_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_sshl_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_ushl_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline void gen_swstep_exception(DisasContext *s, int isv, int ex) uint64_t vfp_expand_imm(int size, uint8_t imm8); /* Vector operations shared between ARM and AArch64. */ +extern const GVecGen2 ceq0_op[4]; +extern const GVecGen2 clt0_op[4]; +extern const GVecGen2 cgt0_op[4]; +extern const GVecGen2 cle0_op[4]; +extern const GVecGen2 cge0_op[4]; extern const GVecGen3 mla_op[4]; extern const GVecGen3 mls_op[4]; extern const GVecGen3 cmtst_op[4]; diff --git a/target/arm/neon_helper.c b/target/arm/neon_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon_helper.c +++ b/target/arm/neon_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_hsub_u32)(uint32_t src1, uint32_t src2) return dest; } -#define NEON_FN(dest, src1, src2) dest = (src1 > src2) ? ~0 : 0 -NEON_VOP(cgt_s8, neon_s8, 4) -NEON_VOP(cgt_u8, neon_u8, 4) -NEON_VOP(cgt_s16, neon_s16, 2) -NEON_VOP(cgt_u16, neon_u16, 2) -NEON_VOP(cgt_s32, neon_s32, 1) -NEON_VOP(cgt_u32, neon_u32, 1) -#undef NEON_FN - -#define NEON_FN(dest, src1, src2) dest = (src1 >= src2) ? ~0 : 0 -NEON_VOP(cge_s8, neon_s8, 4) -NEON_VOP(cge_u8, neon_u8, 4) -NEON_VOP(cge_s16, neon_s16, 2) -NEON_VOP(cge_u16, neon_u16, 2) -NEON_VOP(cge_s32, neon_s32, 1) -NEON_VOP(cge_u32, neon_u32, 1) -#undef NEON_FN - #define NEON_FN(dest, src1, src2) dest = (src1 < src2) ? src1 : src2 NEON_POP(pmin_s8, neon_s8, 4) NEON_POP(pmin_u8, neon_u8, 4) @@ -XXX,XX +XXX,XX @@ NEON_VOP(tst_u16, neon_u16, 2) NEON_VOP(tst_u32, neon_u32, 1) #undef NEON_FN -#define NEON_FN(dest, src1, src2) dest = (src1 == src2) ? -1 : 0 -NEON_VOP(ceq_u8, neon_u8, 4) -NEON_VOP(ceq_u16, neon_u16, 2) -NEON_VOP(ceq_u32, neon_u32, 1) -#undef NEON_FN - /* Count Leading Sign/Zero Bits. */ static inline int do_clz8(uint8_t x) { diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_fn4(DisasContext *s, bool is_q, int rd, int rn, int rm, is_q ? 16 : 8, vec_full_reg_size(s)); } +/* Expand a 2-operand AdvSIMD vector operation using an op descriptor. */ +static void gen_gvec_op2(DisasContext *s, bool is_q, int rd, + int rn, const GVecGen2 *gvec_op) +{ + tcg_gen_gvec_2(vec_full_reg_offset(s, rd), vec_full_reg_offset(s, rn), + is_q ? 16 : 8, vec_full_reg_size(s), gvec_op); +} + /* Expand a 2-operand + immediate AdvSIMD vector operation using * an op descriptor. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) return; } break; + case 0x8: /* CMGT, CMGE */ + gen_gvec_op2(s, is_q, rd, rn, u ? &cge0_op[size] : &cgt0_op[size]); + return; + case 0x9: /* CMEQ, CMLE */ + gen_gvec_op2(s, is_q, rd, rn, u ? &cle0_op[size] : &ceq0_op[size]); + return; + case 0xa: /* CMLT */ + gen_gvec_op2(s, is_q, rd, rn, &clt0_op[size]); + return; case 0xb: if (u) { /* ABS, NEG */ gen_gvec_fn2(s, is_q, rd, rn, tcg_gen_gvec_neg, size); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) for (pass = 0; pass < (is_q ? 4 : 2); pass++) { TCGv_i32 tcg_op = tcg_temp_new_i32(); TCGv_i32 tcg_res = tcg_temp_new_i32(); - TCGCond cond; read_vec_element_i32(s, tcg_op, rn, pass, MO_32); if (size == 2) { /* Special cases for 32 bit elements */ switch (opcode) { - case 0xa: /* CMLT */ - /* 32 bit integer comparison against zero, result is - * test ? (2^32 - 1) : 0. We implement via setcond(test) - * and inverting. - */ - cond = TCG_COND_LT; - do_cmop: - tcg_gen_setcondi_i32(cond, tcg_res, tcg_op, 0); - tcg_gen_neg_i32(tcg_res, tcg_res); - break; - case 0x8: /* CMGT, CMGE */ - cond = u ? TCG_COND_GE : TCG_COND_GT; - goto do_cmop; - case 0x9: /* CMEQ, CMLE */ - cond = u ? TCG_COND_LE : TCG_COND_EQ; - goto do_cmop; case 0x4: /* CLS */ if (u) { tcg_gen_clzi_i32(tcg_res, tcg_op, 32); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) genfn(tcg_res, cpu_env, tcg_op); break; } - case 0x8: /* CMGT, CMGE */ - case 0x9: /* CMEQ, CMLE */ - case 0xa: /* CMLT */ - { - static NeonGenTwoOpFn * const fns[3][2] = { - { gen_helper_neon_cgt_s8, gen_helper_neon_cgt_s16 }, - { gen_helper_neon_cge_s8, gen_helper_neon_cge_s16 }, - { gen_helper_neon_ceq_u8, gen_helper_neon_ceq_u16 }, - }; - NeonGenTwoOpFn *genfn; - int comp; - bool reverse; - TCGv_i32 tcg_zero = tcg_const_i32(0); - - /* comp = index into [CMGT, CMGE, CMEQ, CMLE, CMLT] */ - comp = (opcode - 0x8) * 2 + u; - /* ...but LE, LT are implemented as reverse GE, GT */ - reverse = (comp > 2); - if (reverse) { - comp = 4 - comp; - } - genfn = fns[comp][size]; - if (reverse) { - genfn(tcg_res, tcg_zero, tcg_op); - } else { - genfn(tcg_res, tcg_op, tcg_zero); - } - tcg_temp_free_i32(tcg_zero); - break; - } case 0x4: /* CLS, CLZ */ if (u) { if (size == 0) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int do_v81_helper(DisasContext *s, gen_helper_gvec_3_ptr *fn, return 1; } +static void gen_ceq0_i32(TCGv_i32 d, TCGv_i32 a) +{ + tcg_gen_setcondi_i32(TCG_COND_EQ, d, a, 0); + tcg_gen_neg_i32(d, d); +} + +static void gen_ceq0_i64(TCGv_i64 d, TCGv_i64 a) +{ + tcg_gen_setcondi_i64(TCG_COND_EQ, d, a, 0); + tcg_gen_neg_i64(d, d); +} + +static void gen_ceq0_vec(unsigned vece, TCGv_vec d, TCGv_vec a) +{ + TCGv_vec zero = tcg_const_zeros_vec_matching(d); + tcg_gen_cmp_vec(TCG_COND_EQ, vece, d, a, zero); + tcg_temp_free_vec(zero); +} + +static const TCGOpcode vecop_list_cmp[] = { + INDEX_op_cmp_vec, 0 +}; + +const GVecGen2 ceq0_op[4] = { + { .fno = gen_helper_gvec_ceq0_b, + .fniv = gen_ceq0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_8 }, + { .fno = gen_helper_gvec_ceq0_h, + .fniv = gen_ceq0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_16 }, + { .fni4 = gen_ceq0_i32, + .fniv = gen_ceq0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_32 }, + { .fni8 = gen_ceq0_i64, + .fniv = gen_ceq0_vec, + .opt_opc = vecop_list_cmp, + .prefer_i64 = TCG_TARGET_REG_BITS == 64, + .vece = MO_64 }, +}; + +static void gen_cle0_i32(TCGv_i32 d, TCGv_i32 a) +{ + tcg_gen_setcondi_i32(TCG_COND_LE, d, a, 0); + tcg_gen_neg_i32(d, d); +} + +static void gen_cle0_i64(TCGv_i64 d, TCGv_i64 a) +{ + tcg_gen_setcondi_i64(TCG_COND_LE, d, a, 0); + tcg_gen_neg_i64(d, d); +} + +static void gen_cle0_vec(unsigned vece, TCGv_vec d, TCGv_vec a) +{ + TCGv_vec zero = tcg_const_zeros_vec_matching(d); + tcg_gen_cmp_vec(TCG_COND_LE, vece, d, a, zero); + tcg_temp_free_vec(zero); +} + +const GVecGen2 cle0_op[4] = { + { .fno = gen_helper_gvec_cle0_b, + .fniv = gen_cle0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_8 }, + { .fno = gen_helper_gvec_cle0_h, + .fniv = gen_cle0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_16 }, + { .fni4 = gen_cle0_i32, + .fniv = gen_cle0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_32 }, + { .fni8 = gen_cle0_i64, + .fniv = gen_cle0_vec, + .opt_opc = vecop_list_cmp, + .prefer_i64 = TCG_TARGET_REG_BITS == 64, + .vece = MO_64 }, +}; + +static void gen_cge0_i32(TCGv_i32 d, TCGv_i32 a) +{ + tcg_gen_setcondi_i32(TCG_COND_GE, d, a, 0); + tcg_gen_neg_i32(d, d); +} + +static void gen_cge0_i64(TCGv_i64 d, TCGv_i64 a) +{ + tcg_gen_setcondi_i64(TCG_COND_GE, d, a, 0); + tcg_gen_neg_i64(d, d); +} + +static void gen_cge0_vec(unsigned vece, TCGv_vec d, TCGv_vec a) +{ + TCGv_vec zero = tcg_const_zeros_vec_matching(d); + tcg_gen_cmp_vec(TCG_COND_GE, vece, d, a, zero); + tcg_temp_free_vec(zero); +} + +const GVecGen2 cge0_op[4] = { + { .fno = gen_helper_gvec_cge0_b, + .fniv = gen_cge0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_8 }, + { .fno = gen_helper_gvec_cge0_h, + .fniv = gen_cge0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_16 }, + { .fni4 = gen_cge0_i32, + .fniv = gen_cge0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_32 }, + { .fni8 = gen_cge0_i64, + .fniv = gen_cge0_vec, + .opt_opc = vecop_list_cmp, + .prefer_i64 = TCG_TARGET_REG_BITS == 64, + .vece = MO_64 }, +}; + +static void gen_clt0_i32(TCGv_i32 d, TCGv_i32 a) +{ + tcg_gen_setcondi_i32(TCG_COND_LT, d, a, 0); + tcg_gen_neg_i32(d, d); +} + +static void gen_clt0_i64(TCGv_i64 d, TCGv_i64 a) +{ + tcg_gen_setcondi_i64(TCG_COND_LT, d, a, 0); + tcg_gen_neg_i64(d, d); +} + +static void gen_clt0_vec(unsigned vece, TCGv_vec d, TCGv_vec a) +{ + TCGv_vec zero = tcg_const_zeros_vec_matching(d); + tcg_gen_cmp_vec(TCG_COND_LT, vece, d, a, zero); + tcg_temp_free_vec(zero); +} + +const GVecGen2 clt0_op[4] = { + { .fno = gen_helper_gvec_clt0_b, + .fniv = gen_clt0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_8 }, + { .fno = gen_helper_gvec_clt0_h, + .fniv = gen_clt0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_16 }, + { .fni4 = gen_clt0_i32, + .fniv = gen_clt0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_32 }, + { .fni8 = gen_clt0_i64, + .fniv = gen_clt0_vec, + .opt_opc = vecop_list_cmp, + .prefer_i64 = TCG_TARGET_REG_BITS == 64, + .vece = MO_64 }, +}; + +static void gen_cgt0_i32(TCGv_i32 d, TCGv_i32 a) +{ + tcg_gen_setcondi_i32(TCG_COND_GT, d, a, 0); + tcg_gen_neg_i32(d, d); +} + +static void gen_cgt0_i64(TCGv_i64 d, TCGv_i64 a) +{ + tcg_gen_setcondi_i64(TCG_COND_GT, d, a, 0); + tcg_gen_neg_i64(d, d); +} + +static void gen_cgt0_vec(unsigned vece, TCGv_vec d, TCGv_vec a) +{ + TCGv_vec zero = tcg_const_zeros_vec_matching(d); + tcg_gen_cmp_vec(TCG_COND_GT, vece, d, a, zero); + tcg_temp_free_vec(zero); +} + +const GVecGen2 cgt0_op[4] = { + { .fno = gen_helper_gvec_cgt0_b, + .fniv = gen_cgt0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_8 }, + { .fno = gen_helper_gvec_cgt0_h, + .fniv = gen_cgt0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_16 }, + { .fni4 = gen_cgt0_i32, + .fniv = gen_cgt0_vec, + .opt_opc = vecop_list_cmp, + .vece = MO_32 }, + { .fni8 = gen_cgt0_i64, + .fniv = gen_cgt0_vec, + .opt_opc = vecop_list_cmp, + .prefer_i64 = TCG_TARGET_REG_BITS == 64, + .vece = MO_64 }, +}; + static void gen_ssra8_i64(TCGv_i64 d, TCGv_i64 a, int64_t shift) { tcg_gen_vec_sar8i_i64(a, a, shift); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_gen_gvec_abs(size, rd_ofs, rm_ofs, vec_size, vec_size); break; + case NEON_2RM_VCEQ0: + tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size, + vec_size, &ceq0_op[size]); + break; + case NEON_2RM_VCGT0: + tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size, + vec_size, &cgt0_op[size]); + break; + case NEON_2RM_VCLE0: + tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size, + vec_size, &cle0_op[size]); + break; + case NEON_2RM_VCGE0: + tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size, + vec_size, &cge0_op[size]); + break; + case NEON_2RM_VCLT0: + tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size, + vec_size, &clt0_op[size]); + break; + default: elementwise: for (pass = 0; pass < (q ? 4 : 2); pass++) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) default: abort(); } break; - case NEON_2RM_VCGT0: case NEON_2RM_VCLE0: - tmp2 = tcg_const_i32(0); - switch(size) { - case 0: gen_helper_neon_cgt_s8(tmp, tmp, tmp2); break; - case 1: gen_helper_neon_cgt_s16(tmp, tmp, tmp2); break; - case 2: gen_helper_neon_cgt_s32(tmp, tmp, tmp2); break; - default: abort(); - } - tcg_temp_free_i32(tmp2); - if (op == NEON_2RM_VCLE0) { - tcg_gen_not_i32(tmp, tmp); - } - break; - case NEON_2RM_VCGE0: case NEON_2RM_VCLT0: - tmp2 = tcg_const_i32(0); - switch(size) { - case 0: gen_helper_neon_cge_s8(tmp, tmp, tmp2); break; - case 1: gen_helper_neon_cge_s16(tmp, tmp, tmp2); break; - case 2: gen_helper_neon_cge_s32(tmp, tmp, tmp2); break; - default: abort(); - } - tcg_temp_free_i32(tmp2); - if (op == NEON_2RM_VCLT0) { - tcg_gen_not_i32(tmp, tmp); - } - break; - case NEON_2RM_VCEQ0: - tmp2 = tcg_const_i32(0); - switch(size) { - case 0: gen_helper_neon_ceq_u8(tmp, tmp, tmp2); break; - case 1: gen_helper_neon_ceq_u16(tmp, tmp, tmp2); break; - case 2: gen_helper_neon_ceq_u32(tmp, tmp, tmp2); break; - default: abort(); - } - tcg_temp_free_i32(tmp2); - break; case NEON_2RM_VCGT0_F: { TCGv_ptr fpstatus = get_fpstatus_ptr(1); diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve2_pmull_h)(void *vd, void *vn, void *vm, uint32_t desc) } } #endif + +#define DO_CMP0(NAME, TYPE, OP) \ +void HELPER(NAME)(void *vd, void *vn, uint32_t desc) \ +{ \ + intptr_t i, opr_sz = simd_oprsz(desc); \ + for (i = 0; i < opr_sz; i += sizeof(TYPE)) { \ + TYPE nn = *(TYPE *)(vn + i); \ + *(TYPE *)(vd + i) = -(nn OP 0); \ + } \ + clear_tail(vd, opr_sz, simd_maxsz(desc)); \ +} + +DO_CMP0(gvec_ceq0_b, int8_t, ==) +DO_CMP0(gvec_clt0_b, int8_t, <) +DO_CMP0(gvec_cle0_b, int8_t, <=) +DO_CMP0(gvec_cgt0_b, int8_t, >) +DO_CMP0(gvec_cge0_b, int8_t, >=) + +DO_CMP0(gvec_ceq0_h, int16_t, ==) +DO_CMP0(gvec_clt0_h, int16_t, <) +DO_CMP0(gvec_cle0_h, int16_t, <=) +DO_CMP0(gvec_cgt0_h, int16_t, >) +DO_CMP0(gvec_cge0_h, int16_t, >=) + +#undef DO_CMP0 -- 2.20.1 From: Jerome Forissier <jerome@forissier.org> The /secure-chosen node is currently used only by create_uart(), but this will change. Therefore move the creation of this node to create_fdt(). Signed-off-by: Jerome Forissier <jerome@forissier.org> Message-id: 20200420121807.8204-2-jerome@forissier.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms) /* /chosen must exist for load_dtb to fill in necessary properties later */ qemu_fdt_add_subnode(fdt, "/chosen"); + if (vms->secure) { + qemu_fdt_add_subnode(fdt, "/secure-chosen"); + } + /* Clock node, for the benefit of the UART. The kernel device tree * binding documentation claims the PL011 node clock properties are * optional but in practice if you omit them the kernel refuses to @@ -XXX,XX +XXX,XX @@ static void create_uart(const VirtMachineState *vms, int uart, qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); - qemu_fdt_add_subnode(vms->fdt, "/secure-chosen"); qemu_fdt_setprop_string(vms->fdt, "/secure-chosen", "stdout-path", nodename); } -- 2.20.1 From: Jerome Forissier <jerome@forissier.org> Generate random seeds to be used by the non-secure and/or secure OSes for ASLR. The seeds are 64-bit random values exported via the DT properties /chosen/kaslr-seed [1] and /secure-chosen/kaslr-seed, the latter being used by OP-TEE [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e5bc0c37c97e1 [2] https://github.com/OP-TEE/optee_os/commit/ef262691fe0e Signed-off-by: Jerome Forissier <jerome@forissier.org> Message-id: 20200420121807.8204-3-jerome@forissier.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "hw/acpi/generic_event_device.h" #include "hw/virtio/virtio-iommu.h" #include "hw/char/pl011.h" +#include "qemu/guest-random.h" #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \ static void virt_##major##_##minor##_class_init(ObjectClass *oc, \ @@ -XXX,XX +XXX,XX @@ static bool cpu_type_valid(const char *cpu) return false; } +static void create_kaslr_seed(VirtMachineState *vms, const char *node) +{ + Error *err = NULL; + uint64_t seed; + + if (qemu_guest_getrandom(&seed, sizeof(seed), &err)) { + error_free(err); + return; + } + qemu_fdt_setprop_u64(vms->fdt, node, "kaslr-seed", seed); +} + static void create_fdt(VirtMachineState *vms) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms) /* /chosen must exist for load_dtb to fill in necessary properties later */ qemu_fdt_add_subnode(fdt, "/chosen"); + create_kaslr_seed(vms, "/chosen"); if (vms->secure) { qemu_fdt_add_subnode(fdt, "/secure-chosen"); + create_kaslr_seed(vms, "/secure-chosen"); } /* Clock node, for the benefit of the UART. The kernel device tree -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Under KVM these registers are written by the hardware. Restrict the writefn handlers to TCG to avoid when building without TCG: LINK aarch64-softmmu/qemu-system-aarch64 target/arm/helper.o: In function `do_ats_write': target/arm/helper.c:3524: undefined reference to `raise_exception' Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200423073358.27155-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +#ifdef CONFIG_TCG static uint64_t do_ats_write(CPUARMState *env, uint64_t value, MMUAccessType access_type, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value, } return par64; } +#endif /* CONFIG_TCG */ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { +#ifdef CONFIG_TCG MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; uint64_t par64; ARMMMUIdx mmu_idx; @@ -XXX,XX +XXX,XX @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) par64 = do_ats_write(env, value, access_type, mmu_idx); A32_BANKED_CURRENT_REG_SET(env, par, par64); +#else + /* Handled by hardware accelerator. */ + g_assert_not_reached(); +#endif /* CONFIG_TCG */ } static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { +#ifdef CONFIG_TCG MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; uint64_t par64; par64 = do_ats_write(env, value, access_type, ARMMMUIdx_E2); A32_BANKED_CURRENT_REG_SET(env, par, par64); +#else + /* Handled by hardware accelerator. */ + g_assert_not_reached(); +#endif /* CONFIG_TCG */ } static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri, static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { +#ifdef CONFIG_TCG MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; ARMMMUIdx mmu_idx; int secure = arm_is_secure_below_el3(env); @@ -XXX,XX +XXX,XX @@ static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri, } env->cp15.par_el[1] = do_ats_write(env, value, access_type, mmu_idx); +#else + /* Handled by hardware accelerator. */ + g_assert_not_reached(); +#endif /* CONFIG_TCG */ } #endif -- 2.20.1 From: Thomas Huth <thuth@redhat.com> Make cpu_register() (renamed to arm_cpu_register()) available from internals.h so we can register CPUs also from other files in the future. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200423073358.27155-3-philmd@redhat.com Message-ID: <20190921150420.30743-2-thuth@redhat.com> [PMD: Only take cpu_register() from Thomas's patch] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu-qom.h | 9 ++++++++- target/arm/cpu.c | 10 ++-------- target/arm/cpu64.c | 8 +------- 3 files changed, 11 insertions(+), 16 deletions(-) diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-qom.h +++ b/target/arm/cpu-qom.h @@ -XXX,XX +XXX,XX @@ struct arm_boot_info; #define TYPE_ARM_MAX_CPU "max-" TYPE_ARM_CPU -typedef struct ARMCPUInfo ARMCPUInfo; +typedef struct ARMCPUInfo { + const char *name; + void (*initfn)(Object *obj); + void (*class_init)(ObjectClass *oc, void *data); +} ARMCPUInfo; + +void arm_cpu_register(const ARMCPUInfo *info); +void aarch64_cpu_register(const ARMCPUInfo *info); /** * ARMCPUClass: diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) #endif /* !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) */ -struct ARMCPUInfo { - const char *name; - void (*initfn)(Object *obj); - void (*class_init)(ObjectClass *oc, void *data); -}; - static const ARMCPUInfo arm_cpus[] = { #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) { .name = "arm926", .initfn = arm926_initfn }, @@ -XXX,XX +XXX,XX @@ static void cpu_register_class_init(ObjectClass *oc, void *data) acc->info = data; } -static void cpu_register(const ARMCPUInfo *info) +void arm_cpu_register(const ARMCPUInfo *info) { TypeInfo type_info = { .parent = TYPE_ARM_CPU, @@ -XXX,XX +XXX,XX @@ static void arm_cpu_register_types(void) type_register_static(&idau_interface_type_info); while (info->name) { - cpu_register(info); + arm_cpu_register(info); info++; } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu_max_set_sve_max_vq, NULL, NULL, &error_fatal); } -struct ARMCPUInfo { - const char *name; - void (*initfn)(Object *obj); - void (*class_init)(ObjectClass *oc, void *data); -}; - static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a57", .initfn = aarch64_a57_initfn }, { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, @@ -XXX,XX +XXX,XX @@ static void cpu_register_class_init(ObjectClass *oc, void *data) acc->info = data; } -static void aarch64_cpu_register(const ARMCPUInfo *info) +void aarch64_cpu_register(const ARMCPUInfo *info) { TypeInfo type_info = { .parent = TYPE_AARCH64_CPU, -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200423073358.27155-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 8 +++----- target/arm/cpu64.c | 8 +++----- 2 files changed, 6 insertions(+), 10 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { { .name = "any", .initfn = arm_max_initfn }, #endif #endif - { .name = NULL } }; static Property arm_cpu_properties[] = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo idau_interface_type_info = { static void arm_cpu_register_types(void) { - const ARMCPUInfo *info = arm_cpus; + size_t i; type_register_static(&arm_cpu_type_info); type_register_static(&idau_interface_type_info); - while (info->name) { - arm_cpu_register(info); - info++; + for (i = 0; i < ARRAY_SIZE(arm_cpus); ++i) { + arm_cpu_register(&arm_cpus[i]); } #ifdef CONFIG_KVM diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, - { .name = NULL } }; static bool aarch64_cpu_get_aarch64(Object *obj, Error **errp) @@ -XXX,XX +XXX,XX @@ static const TypeInfo aarch64_cpu_type_info = { static void aarch64_cpu_register_types(void) { - const ARMCPUInfo *info = aarch64_cpus; + size_t i; type_register_static(&aarch64_cpu_type_info); - while (info->name) { - aarch64_cpu_register(info); - info++; + for (i = 0; i < ARRAY_SIZE(aarch64_cpus); ++i) { + aarch64_cpu_register(&aarch64_cpus[i]); } } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We will move this code in the next commit. Clean it up first to avoid checkpatch.pl errors. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200423073358.27155-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request) CPUARMState *env = &cpu->env; bool ret = false; - /* ARMv7-M interrupt masking works differently than -A or -R. + /* + * ARMv7-M interrupt masking works differently than -A or -R. * There is no FIQ/IRQ distinction. Instead of I and F bits * masking FIQ and IRQ interrupts, an exception is taken only * if it is higher priority than the current execution priority @@ -XXX,XX +XXX,XX @@ static void arm1026_initfn(Object *obj) static void arm1136_r2_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - /* What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an + /* + * What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an * older core than plain "arm1136". In particular this does not * have the v6K features. * These ID register values are correct for 1136 but may be wrong @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { { .name = "arm926", .initfn = arm926_initfn }, { .name = "arm946", .initfn = arm946_initfn }, { .name = "arm1026", .initfn = arm1026_initfn }, - /* What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an + /* + * What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an * older core than plain "arm1136". In particular this does not * have the v6K features. */ -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Allow name wildcards in qemu_fdt_node_path(). This is useful to find all nodes with a given compatibility string. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200423121114.4274-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/device_tree.h | 3 +++ device_tree.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/sysemu/device_tree.h b/include/sysemu/device_tree.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/device_tree.h +++ b/include/sysemu/device_tree.h @@ -XXX,XX +XXX,XX @@ void *load_device_tree_from_sysfs(void); * NULL. If there is no error but no matching node was found, the * returned array contains a single element equal to NULL. If an error * was encountered when parsing the blob, the function returns NULL + * + * @name may be NULL to wildcard names and only match compatibility + * strings. */ char **qemu_fdt_node_path(void *fdt, const char *name, char *compat, Error **errp); diff --git a/device_tree.c b/device_tree.c index XXXXXXX..XXXXXXX 100644 --- a/device_tree.c +++ b/device_tree.c @@ -XXX,XX +XXX,XX @@ char **qemu_fdt_node_path(void *fdt, const char *name, char *compat, offset = len; break; } - if (!strcmp(iter_name, name)) { + if (!name || !strcmp(iter_name, name)) { char *path; path = g_malloc(path_len); -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Make compat in qemu_fdt_node_path() const char *. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200423121114.4274-3-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/device_tree.h | 2 +- device_tree.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/sysemu/device_tree.h b/include/sysemu/device_tree.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/device_tree.h +++ b/include/sysemu/device_tree.h @@ -XXX,XX +XXX,XX @@ void *load_device_tree_from_sysfs(void); * @name may be NULL to wildcard names and only match compatibility * strings. */ -char **qemu_fdt_node_path(void *fdt, const char *name, char *compat, +char **qemu_fdt_node_path(void *fdt, const char *name, const char *compat, Error **errp); /** diff --git a/device_tree.c b/device_tree.c index XXXXXXX..XXXXXXX 100644 --- a/device_tree.c +++ b/device_tree.c @@ -XXX,XX +XXX,XX @@ char **qemu_fdt_node_unit_path(void *fdt, const char *name, Error **errp) return path_array; } -char **qemu_fdt_node_path(void *fdt, const char *name, char *compat, +char **qemu_fdt_node_path(void *fdt, const char *name, const char *compat, Error **errp) { int offset, len, ret; -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Move arm_boot_info into XlnxZCU102. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200423121114.4274-4-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { bool secure; bool virt; + + struct arm_boot_info binfo; } XlnxZCU102; #define TYPE_ZCU102_MACHINE MACHINE_TYPE_NAME("xlnx-zcu102") #define ZCU102_MACHINE(obj) \ OBJECT_CHECK(XlnxZCU102, (obj), TYPE_ZCU102_MACHINE) -static struct arm_boot_info xlnx_zcu102_binfo; static bool zcu102_get_secure(Object *obj, Error **errp) { @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_init(MachineState *machine) /* TODO create and connect IDE devices for ide_drive_get() */ - xlnx_zcu102_binfo.ram_size = ram_size; - xlnx_zcu102_binfo.loader_start = 0; - arm_load_kernel(s->soc.boot_cpu_ptr, machine, &xlnx_zcu102_binfo); + s->binfo.ram_size = ram_size; + s->binfo.loader_start = 0; + arm_load_kernel(s->soc.boot_cpu_ptr, machine, &s->binfo); } static void xlnx_zcu102_machine_instance_init(Object *obj) -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Disable unsupported FDT firmware nodes if a user passes us a DTB with nodes enabled that the machine cannot support due to lack of EL3 or EL2 support. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200423121114.4274-5-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qemu/log.h" #include "sysemu/qtest.h" +#include "sysemu/device_tree.h" typedef struct XlnxZCU102 { MachineState parent_obj; @@ -XXX,XX +XXX,XX @@ static void zcu102_set_virt(Object *obj, bool value, Error **errp) s->virt = value; } +static void zcu102_modify_dtb(const struct arm_boot_info *binfo, void *fdt) +{ + XlnxZCU102 *s = container_of(binfo, XlnxZCU102, binfo); + bool method_is_hvc; + char **node_path; + const char *r; + int prop_len; + int i; + + /* If EL3 is enabled, we keep all firmware nodes active. */ + if (!s->secure) { + node_path = qemu_fdt_node_path(fdt, NULL, "xlnx,zynqmp-firmware", + &error_fatal); + + for (i = 0; node_path && node_path[i]; i++) { + r = qemu_fdt_getprop(fdt, node_path[i], "method", &prop_len, NULL); + method_is_hvc = r && !strcmp("hvc", r); + + /* Allow HVC based firmware if EL2 is enabled. */ + if (method_is_hvc && s->virt) { + continue; + } + qemu_fdt_setprop_string(fdt, node_path[i], "status", "disabled"); + } + g_strfreev(node_path); + } +} + static void xlnx_zcu102_init(MachineState *machine) { XlnxZCU102 *s = ZCU102_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_init(MachineState *machine) s->binfo.ram_size = ram_size; s->binfo.loader_start = 0; + s->binfo.modify_dtb = zcu102_modify_dtb; arm_load_kernel(s->soc.boot_cpu_ptr, machine, &s->binfo); } -- 2.20.1 Nothing too exciting, but does include the last bits of v8.1M support work. -- PMM The following changes since commit e79de63ab1bd1f6550e7b915e433bec1ad1a870a: Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210107' into staging (2021-01-07 20:34:05 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210108 for you to fetch changes up to c9f8511ea8d2b80723af0fea1f716d752c1b5208: docs/system: arm: Add sabrelite board description (2021-01-08 15:13:39 +0000) ---------------------------------------------------------------- target-arm queue: * intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs * target/arm: Fix MTE0_ACTIVE * target/arm: Implement v8.1M and Cortex-M55 model * hw/arm/highbank: Drop dead KVM support code * util/qemu-timer: Make timer_free() imply timer_del() * various devices: Use ptimer_free() in finalize function * docs/system: arm: Add sabrelite board description * sabrelite: Minor fixes to allow booting U-Boot ---------------------------------------------------------------- Andrew Jones (1): hw/arm/virt: Remove virt machine state 'smp_cpus' Bin Meng (4): hw/misc: imx6_ccm: Update PMU_MISC0 reset value hw/msic: imx6_ccm: Correct register value for silicon type hw/arm: sabrelite: Connect the Ethernet PHY at address 6 docs/system: arm: Add sabrelite board description Edgar E. Iglesias (1): intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs Gan Qixin (7): digic-timer: Use ptimer_free() in the finalize function to avoid memleaks allwinner-a10-pit: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_rtc: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_pwm: Use ptimer_free() in the finalize function to avoid memleaks mss-timer: Use ptimer_free() in the finalize function to avoid memleaks musicpal: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_mct: Use ptimer_free() in the finalize function to avoid memleaks Peter Maydell (9): hw/intc/armv7m_nvic: Correct handling of CCR.BFHFNMIGN target/arm: Correct store of FPSCR value via FPCXT_S target/arm: Implement FPCXT_NS fp system register target/arm: Implement Cortex-M55 model hw/arm/highbank: Drop dead KVM support code util/qemu-timer: Make timer_free() imply timer_del() scripts/coccinelle: New script to remove unnecessary timer_del() calls Remove superfluous timer_del() calls target/arm: Remove timer_del()/timer_deinit() before timer_free() Richard Henderson (1): target/arm: Fix MTE0_ACTIVE docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++ include/hw/arm/virt.h | 3 +- include/qemu/timer.h | 24 +++--- block/iscsi.c | 2 - block/nbd.c | 1 - block/qcow2.c | 1 - hw/arm/highbank.c | 14 +-- hw/arm/musicpal.c | 12 +++ hw/arm/sabrelite.c | 4 + hw/arm/virt-acpi-build.c | 9 +- hw/arm/virt.c | 21 +++-- hw/block/nvme.c | 2 - hw/char/serial.c | 2 - hw/char/virtio-serial-bus.c | 2 - hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/arm_gic.c | 4 +- hw/intc/armv7m_nvic.c | 15 ++++ hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/misc/imx6_ccm.c | 4 +- hw/net/e1000.c | 3 - hw/net/e1000e_core.c | 8 -- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 - hw/rtc/exynos4210_rtc.c | 9 ++ hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 - hw/timer/allwinner-a10-pit.c | 11 +++ hw/timer/digic-timer.c | 8 ++ hw/timer/exynos4210_mct.c | 14 +++ hw/timer/exynos4210_pwm.c | 11 +++ hw/timer/mss-timer.c | 13 +++ hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/arm/cpu.c | 2 - target/arm/cpu_tcg.c | 42 +++++++++ target/arm/helper.c | 2 +- target/s390x/cpu.c | 2 - ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - target/arm/translate-vfp.c.inc | 114 ++++++++++++++++++++++-- 65 files changed, 421 insertions(+), 111 deletions(-) create mode 100644 docs/system/arm/sabrelite.rst create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Correct the indexing into s->cpu_ctlr for vCPUs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20201214222154.3480243-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline void gic_get_best_virq(GICState *s, int cpu, static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, int group_mask) { + int cpu_iface = virt ? (cpu + GIC_NCPU) : cpu; + if (!virt && !(s->ctlr & group_mask)) { return false; } @@ -XXX,XX +XXX,XX @@ static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, return false; } - if (!(s->cpu_ctlr[cpu] & group_mask)) { + if (!(s->cpu_ctlr[cpu_iface] & group_mask)) { return false; } -- 2.20.1 From: Andrew Jones <drjones@redhat.com> virt machine's 'smp_cpus' and machine->smp.cpus must always have the same value. And, anywhere we have virt machine state we have machine state. So let's remove the redundancy. Also, to make it easier to see that machine->smp is the true source for "smp_cpus" and "max_cpus", avoid passing them in function parameters, preferring instead to get them from the state. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20201215174815.51520-1-drjones@redhat.com [PMM: minor formatting tweak to smp_cpus variable declaration] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 3 +-- hw/arm/virt-acpi-build.c | 9 +++++---- hw/arm/virt.c | 21 ++++++++++----------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { MemMapEntry *memmap; char *pciehb_nodename; const int *irqmap; - int smp_cpus; void *fdt; int fdt_size; uint32_t clock_phandle; @@ -XXX,XX +XXX,XX @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) assert(vms->gic_version == VIRT_GIC_VERSION_3); - return vms->smp_cpus > redist0_capacity ? 2 : 1; + return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1; } #endif /* QEMU_ARM_VIRT_H */ diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #define ACPI_BUILD_TABLE_SIZE 0x20000 -static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) +static void acpi_dsdt_add_cpus(Aml *scope, VirtMachineState *vms) { + MachineState *ms = MACHINE(vms); uint16_t i; - for (i = 0; i < smp_cpus; i++) { + for (i = 0; i < ms->smp.cpus; i++) { Aml *dev = aml_device("C%.03X", i); aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0007"))); aml_append(dev, aml_name_decl("_UID", aml_int(i))); @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) gicd->base_address = cpu_to_le64(memmap[VIRT_GIC_DIST].base); gicd->version = vms->gic_version; - for (i = 0; i < vms->smp_cpus; i++) { + for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { AcpiMadtGenericCpuInterface *gicc = acpi_data_push(table_data, sizeof(*gicc)); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * the RTC ACPI device at all when using UEFI. */ scope = aml_scope("\\_SB"); - acpi_dsdt_add_cpus(scope, vms->smp_cpus); + acpi_dsdt_add_cpus(scope, vms); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); if (vmc->acpi_expose_flash) { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/timer"); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) int cpu; int addr_cells = 1; const MachineState *ms = MACHINE(vms); + int smp_cpus = ms->smp.cpus; /* * From Documentation/devicetree/bindings/arm/cpus.txt @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) * The simplest way to go is to examine affinity IDs of all our CPUs. If * at least one of them has Aff3 populated, we set #address-cells to 2. */ - for (cpu = 0; cpu < vms->smp_cpus; cpu++) { + for (cpu = 0; cpu < smp_cpus; cpu++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); if (armcpu->mp_affinity & ARM_AFF3_MASK) { @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#address-cells", addr_cells); qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#size-cells", 0x0); - for (cpu = vms->smp_cpus - 1; cpu >= 0; cpu--) { + for (cpu = smp_cpus - 1; cpu >= 0; cpu--) { char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); CPUState *cs = CPU(armcpu); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", armcpu->dtb_compatible); - if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED - && vms->smp_cpus > 1) { + if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED && smp_cpus > 1) { qemu_fdt_setprop_string(vms->fdt, nodename, "enable-method", "psci"); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/pmu"); @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) * virt_cpu_post_init() must be called after the CPUs have * been realized and the GIC has been created. */ -static void virt_cpu_post_init(VirtMachineState *vms, int max_cpus, - MemoryRegion *sysmem) +static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) { + int max_cpus = MACHINE(vms)->smp.max_cpus; bool aarch64, pmu, steal_time; CPUState *cpu; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } - vms->smp_cpus = smp_cpus; - if (vms->virt && kvm_enabled()) { error_report("mach-virt: KVM does not support providing " "Virtualization extensions to the guest CPU"); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_fdt(vms); possible_cpus = mc->possible_cpu_arch_ids(machine); + assert(possible_cpus->len == max_cpus); for (n = 0; n < possible_cpus->len; n++) { Object *cpuobj; CPUState *cs; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gic(vms); - virt_cpu_post_init(vms, possible_cpus->len, sysmem); + virt_cpu_post_init(vms, sysmem); fdt_add_pmu_nodes(vms); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In 50244cc76abc we updated mte_check_fail to match the ARM pseudocode, using the correct EL to select the TCF field. But we failed to update MTE0_ACTIVE the same way, which led to g_assert_not_reached(). Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/bugs/1907137 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201221204426.88514-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, if (FIELD_EX32(flags, TBFLAG_A64, UNPRIV) && tbid && !(env->pstate & PSTATE_TCO) - && (sctlr & SCTLR_TCF0) + && (sctlr & SCTLR_TCF) && allocation_tag_access_enabled(env, 0, sctlr)) { flags = FIELD_DP32(flags, TBFLAG_A64, MTE0_ACTIVE, 1); } -- 2.20.1 The CCR is a register most of whose bits are banked between security states but where BFHFNMIGN is not, and we keep it in the non-secure entry of the v7m.ccr[] array. The logic which tries to handle this bit fails to implement the "RAZ/WI from Nonsecure if AIRCR.BFHFNMINS is zero" requirement; correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-2-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) */ val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + /* BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0 */ + if (!attrs.secure) { + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + val &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } + } return val; case 0xd24: /* System Handler Control and State (SHCSR) */ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (cpu->env.v7m.ccr[M_REG_NS] & ~R_V7M_CCR_BFHFNMIGN_MASK) | (value & R_V7M_CCR_BFHFNMIGN_MASK); value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } else { + /* + * BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0, so + * preserve the state currently in the NS element of the array + */ + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + value |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + } } cpu->env.v7m.ccr[attrs.secure] = value; -- 2.20.1 In commit 64f863baeedc8659 we implemented the v8.1M FPCXT_S register, but we got the write behaviour wrong. On read, this register reads bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't just write back those bits -- it writes a value to the whole FPSCR, whose upper 4 bits are zeroes. We also incorrectly implemented the write-to-FPSCR as a simple store to vfp.xregs; this skips the "update the softfloat flags" part of the vfp_set_fpscr helper so the value would read back correctly but not actually take effect. Fix both of these things by doing a complete write to the FPSCR using the helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-3-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, } case ARM_VFP_FPCXT_S: { - TCGv_i32 sfpa, control, fpscr; - /* Set FPSCR[27:0] and CONTROL.SFPA from value */ + TCGv_i32 sfpa, control; + /* + * Set FPSCR and CONTROL.SFPA from value; the new FPSCR takes + * bits [27:0] from value and zeroes bits [31:28]. + */ tmp = loadfn(s, opaque); sfpa = tcg_temp_new_i32(); tcg_gen_shri_i32(sfpa, tmp, 31); @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_gen_deposit_i32(control, control, sfpa, R_V7M_CONTROL_SFPA_SHIFT, 1); store_cpu_field(control, v7m.control[M_REG_S]); - fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(fpscr, fpscr, FPCR_NZCV_MASK); tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); - tcg_gen_or_i32(fpscr, fpscr, tmp); - store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + gen_helper_vfp_set_fpscr(cpu_env, tmp); tcg_temp_free_i32(tmp); tcg_temp_free_i32(sfpa); break; -- 2.20.1 Implement the v8.1M FPCXT_NS floating-point system register. This is a little more complicated than FPCXT_S, because it has specific handling for "current FP state is inactive", and it only wants to do PreserveFPState(), not the full set of actions done by ExecuteFPCheck() which vfp_access_check() implements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-4-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 102 ++++++++++++++++++++++++++++++++- 1 file changed, 99 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) } break; case ARM_VFP_FPCXT_S: + case ARM_VFP_FPCXT_NS: if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { return false; } @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return FPSysRegCheckFailed; } - if (!vfp_access_check(s)) { + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * So we don't call vfp_access_check() and the callers must handle this. + */ + if (regno != ARM_VFP_FPCXT_NS && !vfp_access_check(s)) { return FPSysRegCheckDone; } - return FPSysRegCheckContinue; } +static void gen_branch_fpInactive(DisasContext *s, TCGCond cond, + TCGLabel *label) +{ + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * We don't have a TB flag that matches the fpInactive check, so we + * do it at runtime as we don't expect FPCXT_NS accesses to be frequent. + * + * Emit code that checks fpInactive and does a conditional + * branch to label based on it: + * if cond is TCG_COND_NE then branch if fpInactive != 0 (ie if inactive) + * if cond is TCG_COND_EQ then branch if fpInactive == 0 (ie if active) + */ + assert(cond == TCG_COND_EQ || cond == TCG_COND_NE); + + /* fpInactive = FPCCR_NS.ASPEN == 1 && CONTROL.FPCA == 0 */ + TCGv_i32 aspen, fpca; + aspen = load_cpu_field(v7m.fpccr[M_REG_NS]); + fpca = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_xori_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_andi_i32(fpca, fpca, R_V7M_CONTROL_FPCA_MASK); + tcg_gen_or_i32(fpca, fpca, aspen); + tcg_gen_brcondi_i32(tcg_invert_cond(cond), fpca, 0, label); + tcg_temp_free_i32(aspen); + tcg_temp_free_i32(fpca); +} + static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, fp_sysreg_loadfn *loadfn, @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, { /* Do a write to an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); break; } + case ARM_VFP_FPCXT_NS: + lab_end = gen_new_label(); + /* fpInactive case: write is a NOP, so branch to end */ + gen_branch_fpInactive(s, TCG_COND_NE, lab_end); + /* !fpInactive: PreserveFPState(), and reads same as FPCXT_S */ + gen_preserve_fp_state(s); + /* fall through */ case ARM_VFP_FPCXT_S: { TCGv_i32 sfpa, control; @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, default: g_assert_not_reached(); } + if (lab_end) { + gen_set_label(lab_end); + } return true; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, { /* Do a read from an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; + bool lookup_tb = false; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, fpscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); gen_helper_vfp_set_fpscr(cpu_env, fpscr); tcg_temp_free_i32(fpscr); - gen_lookup_tb(s); + lookup_tb = true; + break; + } + case ARM_VFP_FPCXT_NS: + { + TCGv_i32 control, sfpa, fpscr, fpdscr, zero; + TCGLabel *lab_active = gen_new_label(); + + lookup_tb = true; + + gen_branch_fpInactive(s, TCG_COND_EQ, lab_active); + /* fpInactive case: reads as FPDSCR_NS */ + TCGv_i32 tmp = load_cpu_field(v7m.fpdscr[M_REG_NS]); + storefn(s, opaque, tmp); + lab_end = gen_new_label(); + tcg_gen_br(lab_end); + + gen_set_label(lab_active); + /* !fpInactive: Reads the same as FPCXT_S, but side effects differ */ + gen_preserve_fp_state(s); + tmp = tcg_temp_new_i32(); + sfpa = tcg_temp_new_i32(); + fpscr = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(fpscr, cpu_env); + tcg_gen_andi_i32(tmp, fpscr, ~FPCR_NZCV_MASK); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(sfpa, control, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_shli_i32(sfpa, sfpa, 31 - R_V7M_CONTROL_SFPA_SHIFT); + tcg_gen_or_i32(tmp, tmp, sfpa); + tcg_temp_free_i32(control); + /* Store result before updating FPSCR, in case it faults */ + storefn(s, opaque, tmp); + /* If SFPA is zero then set FPSCR from FPDSCR_NS */ + fpdscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); + zero = tcg_const_i32(0); + tcg_gen_movcond_i32(TCG_COND_EQ, fpscr, sfpa, zero, fpdscr, fpscr); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(zero); + tcg_temp_free_i32(sfpa); + tcg_temp_free_i32(fpdscr); + tcg_temp_free_i32(fpscr); break; } default: g_assert_not_reached(); } + + if (lab_end) { + gen_set_label(lab_end); + } + if (lookup_tb) { + gen_lookup_tb(s); + } return true; } -- 2.20.1 Now that we have implemented all the features needed by the v8.1M architecture, we can add the model of the Cortex-M55. This is the configuration without MVE support; we'll add MVE later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-5-peter.maydell@linaro.org --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) cpu->ctr = 0x8000c000; } +static void cortex_m55_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_V8_1M); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd221; /* r0p1 */ + cpu->revidr = 0; + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + /* + * These are the MVFR* values for the FPU, no MVE configuration; + * we will update them later when we implement MVE + */ + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12100011; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x20000030; + cpu->isar.id_pfr1 = 0x00000230; + cpu->isar.id_dfr0 = 0x10200000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00111040; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000011; + cpu->isar.id_isar0 = 0x01103110; + cpu->isar.id_isar1 = 0x02212000; + cpu->isar.id_isar2 = 0x20232232; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; + cpu->clidr = 0x00000000; /* caches not implemented */ + cpu->ctr = 0x8303c003; +} + static const ARMCPRegInfo cortexr5_cp_reginfo[] = { /* Dummy the TCM region regs for the moment */ { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m33", .initfn = cortex_m33_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m55", .initfn = cortex_m55_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, -- 2.20.1 Support for running KVM on 32-bit Arm hosts was removed in commit 82bf7ae84ce739e. You can still run a 32-bit guest on a 64-bit Arm host CPU, but because Arm KVM requires the host and guest CPU types to match, it is not possible to run a guest that requires a Cortex-A9 or Cortex-A15 CPU there. That means that the code in the highbank/midway board models to support KVM is no longer used, and we can delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201215144215.28482-1-peter.maydell@linaro.org --- hw/arm/highbank.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/boot.h" #include "hw/loader.h" #include "net/net.h" -#include "sysemu/kvm.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a15mpcore.h" #include "qemu/log.h" #include "qom/object.h" +#include "cpu.h" #define SMP_BOOT_ADDR 0x100 #define SMP_BOOT_REG 0x40 @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) highbank_binfo.loader_start = 0; highbank_binfo.write_secondary_boot = hb_write_secondary; highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary; - if (!kvm_enabled()) { - highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; - highbank_binfo.write_board_setup = hb_write_board_setup; - highbank_binfo.secure_board_setup = true; - } else { - warn_report("cannot load built-in Monitor support " - "if KVM is enabled. Some guests (such as Linux) " - "may not boot."); - } + highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; + highbank_binfo.write_board_setup = hb_write_board_setup; + highbank_binfo.secure_board_setup = true; arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo); } -- 2.20.1 Currently timer_free() is a simple wrapper for g_free(). This means that the timer being freed must not be currently active, as otherwise QEMU might crash later when the active list is processed and still has a pointer to freed memory on it. As a result almost all calls to timer_free() are preceded by a timer_del() call, as can be seen in the output of git grep -B1 '\<timer_free\>' This is unfortunate API design as it makes it easy to accidentally misuse (by forgetting the timer_del()), and the correct use is annoyingly verbose. Make timer_free() imply a timer_del(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-2-peter.maydell@linaro.org --- include/qemu/timer.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/include/qemu/timer.h b/include/qemu/timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/timer.h +++ b/include/qemu/timer.h @@ -XXX,XX +XXX,XX @@ static inline QEMUTimer *timer_new_ms(QEMUClockType type, QEMUTimerCB *cb, */ void timer_deinit(QEMUTimer *ts); -/** - * timer_free: - * @ts: the timer - * - * Free a timer (it must not be on the active list) - */ -static inline void timer_free(QEMUTimer *ts) -{ - g_free(ts); -} - /** * timer_del: * @ts: the timer @@ -XXX,XX +XXX,XX @@ static inline void timer_free(QEMUTimer *ts) */ void timer_del(QEMUTimer *ts); +/** + * timer_free: + * @ts: the timer + * + * Free a timer. This will call timer_del() for you to remove + * the timer from the active list if it was still active. + */ +static inline void timer_free(QEMUTimer *ts) +{ + timer_del(ts); + g_free(ts); +} + /** * timer_mod_ns: * @ts: the timer -- 2.20.1 Now that timer_free() implicitly calls timer_del(), sequences timer_del(mytimer); timer_free(mytimer); can be simplified to just timer_free(mytimer); Add a Coccinelle script to do this transformation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-3-peter.maydell@linaro.org --- scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci diff --git a/scripts/coccinelle/timer-del-timer-free.cocci b/scripts/coccinelle/timer-del-timer-free.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/timer-del-timer-free.cocci @@ -XXX,XX +XXX,XX @@ +// Remove superfluous timer_del() calls +// +// Copyright Linaro Limited 2020 +// This work is licensed under the terms of the GNU GPLv2 or later. +// +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/timer-del-timer-free.cocci \ +// --in-place --dir . +// +// The timer_free() function now implicitly calls timer_del() +// for you, so calls to timer_del() immediately before the +// timer_free() of the same timer can be deleted. + +@@ +expression T; +@@ +-timer_del(T); + timer_free(T); -- 2.20.1 This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org --- block/iscsi.c | 2 -- block/nbd.c | 1 - block/qcow2.c | 1 - hw/block/nvme.c | 2 -- hw/char/serial.c | 2 -- hw/char/virtio-serial-bus.c | 2 -- hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/net/e1000.c | 3 --- hw/net/e1000e_core.c | 8 -------- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 -- hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 -- hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/s390x/cpu.c | 2 -- ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - 42 files changed, 58 deletions(-) diff --git a/block/iscsi.c b/block/iscsi.c index XXXXXXX..XXXXXXX 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -XXX,XX +XXX,XX @@ static void iscsi_detach_aio_context(BlockDriverState *bs) iscsilun->events = 0; if (iscsilun->nop_timer) { - timer_del(iscsilun->nop_timer); timer_free(iscsilun->nop_timer); iscsilun->nop_timer = NULL; } if (iscsilun->event_timer) { - timer_del(iscsilun->event_timer); timer_free(iscsilun->event_timer); iscsilun->event_timer = NULL; } diff --git a/block/nbd.c b/block/nbd.c index XXXXXXX..XXXXXXX 100644 --- a/block/nbd.c +++ b/block/nbd.c @@ -XXX,XX +XXX,XX @@ static void nbd_recv_coroutines_wake_all(BDRVNBDState *s) static void reconnect_delay_timer_del(BDRVNBDState *s) { if (s->reconnect_delay_timer) { - timer_del(s->reconnect_delay_timer); timer_free(s->reconnect_delay_timer); s->reconnect_delay_timer = NULL; } diff --git a/block/qcow2.c b/block/qcow2.c index XXXXXXX..XXXXXXX 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -XXX,XX +XXX,XX @@ static void cache_clean_timer_del(BlockDriverState *bs) { BDRVQcow2State *s = bs->opaque; if (s->cache_clean_timer) { - timer_del(s->cache_clean_timer); timer_free(s->cache_clean_timer); s->cache_clean_timer = NULL; } diff --git a/hw/block/nvme.c b/hw/block/nvme.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/nvme.c +++ b/hw/block/nvme.c @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_sq(NvmeSQueue *sq, NvmeCtrl *n) { n->sq[sq->sqid] = NULL; - timer_del(sq->timer); timer_free(sq->timer); g_free(sq->io_req); if (sq->sqid) { @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_get_log(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_cq(NvmeCQueue *cq, NvmeCtrl *n) { n->cq[cq->cqid] = NULL; - timer_del(cq->timer); timer_free(cq->timer); msix_vector_unuse(&n->parent_obj, cq->vector); if (cq->cqid) { diff --git a/hw/char/serial.c b/hw/char/serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/serial.c +++ b/hw/char/serial.c @@ -XXX,XX +XXX,XX @@ static void serial_unrealize(DeviceState *dev) qemu_chr_fe_deinit(&s->chr, false); - timer_del(s->modem_status_poll); timer_free(s->modem_status_poll); - timer_del(s->fifo_timeout_timer); timer_free(s->fifo_timeout_timer); fifo8_destroy(&s->recv_fifo); diff --git a/hw/char/virtio-serial-bus.c b/hw/char/virtio-serial-bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/virtio-serial-bus.c +++ b/hw/char/virtio-serial-bus.c @@ -XXX,XX +XXX,XX @@ static void virtio_serial_post_load_timer_cb(void *opaque) } } g_free(s->post_load->connected); - timer_del(s->post_load->timer); timer_free(s->post_load->timer); g_free(s->post_load); s->post_load = NULL; @@ -XXX,XX +XXX,XX @@ static void virtio_serial_device_unrealize(DeviceState *dev) g_free(vser->ports_map); if (vser->post_load) { g_free(vser->post_load->connected); - timer_del(vser->post_load->timer); timer_free(vser->post_load->timer); g_free(vser->post_load); } diff --git a/hw/ide/core.c b/hw/ide/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/core.c +++ b/hw/ide/core.c @@ -XXX,XX +XXX,XX @@ void ide_init2(IDEBus *bus, qemu_irq irq) void ide_exit(IDEState *s) { - timer_del(s->sector_write_timer); timer_free(s->sector_write_timer); qemu_vfree(s->smart_selftest_data); qemu_vfree(s->io_buffer); diff --git a/hw/input/hid.c b/hw/input/hid.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/hid.c +++ b/hw/input/hid.c @@ -XXX,XX +XXX,XX @@ static void hid_idle_timer(void *opaque) static void hid_del_idle_timer(HIDState *hs) { if (hs->idle_timer) { - timer_del(hs->idle_timer); timer_free(hs->idle_timer); hs->idle_timer = NULL; } diff --git a/hw/intc/apic.c b/hw/intc/apic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/apic.c +++ b/hw/intc/apic.c @@ -XXX,XX +XXX,XX @@ static void apic_unrealize(DeviceState *dev) { APICCommonState *s = APIC(dev); - timer_del(s->timer); timer_free(s->timer); local_apics[s->id] = NULL; } diff --git a/hw/intc/ioapic.c b/hw/intc/ioapic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/ioapic.c +++ b/hw/intc/ioapic.c @@ -XXX,XX +XXX,XX @@ static void ioapic_unrealize(DeviceState *dev) { IOAPICCommonState *s = IOAPIC_COMMON(dev); - timer_del(s->delayed_ioapic_service_timer); timer_free(s->delayed_ioapic_service_timer); } diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ipmi/ipmi_bmc_extern.c +++ b/hw/ipmi/ipmi_bmc_extern.c @@ -XXX,XX +XXX,XX @@ static void ipmi_bmc_extern_finalize(Object *obj) { IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(obj); - timer_del(ibe->extern_timer); timer_free(ibe->extern_timer); } diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ pci_e1000_uninit(PCIDevice *dev) { E1000State *d = E1000(dev); - timer_del(d->autoneg_timer); timer_free(d->autoneg_timer); - timer_del(d->mit_timer); timer_free(d->mit_timer); - timer_del(d->flush_queue_timer); timer_free(d->flush_queue_timer); qemu_del_nic(d->nic); } diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e_core.c +++ b/hw/net/e1000e_core.c @@ -XXX,XX +XXX,XX @@ e1000e_intrmgr_pci_unint(E1000ECore *core) { int i; - timer_del(core->radv.timer); timer_free(core->radv.timer); - timer_del(core->rdtr.timer); timer_free(core->rdtr.timer); - timer_del(core->raid.timer); timer_free(core->raid.timer); - timer_del(core->tadv.timer); timer_free(core->tadv.timer); - timer_del(core->tidv.timer); timer_free(core->tidv.timer); - timer_del(core->itr.timer); timer_free(core->itr.timer); for (i = 0; i < E1000E_MSIX_VEC_NUM; i++) { - timer_del(core->eitr[i].timer); timer_free(core->eitr[i].timer); } } @@ -XXX,XX +XXX,XX @@ e1000e_core_pci_uninit(E1000ECore *core) { int i; - timer_del(core->autoneg_timer); timer_free(core->autoneg_timer); e1000e_intrmgr_pci_unint(core); diff --git a/hw/net/pcnet-pci.c b/hw/net/pcnet-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/pcnet-pci.c +++ b/hw/net/pcnet-pci.c @@ -XXX,XX +XXX,XX @@ static void pci_pcnet_uninit(PCIDevice *dev) PCIPCNetState *d = PCI_PCNET(dev); qemu_free_irq(d->state.irq); - timer_del(d->state.poll_timer); timer_free(d->state.poll_timer); qemu_del_nic(d->state.nic); } diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -XXX,XX +XXX,XX @@ static void pci_rtl8139_uninit(PCIDevice *dev) g_free(s->cplus_txbuffer); s->cplus_txbuffer = NULL; - timer_del(s->timer); timer_free(s->timer); qemu_del_nic(s->nic); } diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/spapr_llan.c +++ b/hw/net/spapr_llan.c @@ -XXX,XX +XXX,XX @@ static void spapr_vlan_instance_finalize(Object *obj) } if (dev->rxp_timer) { - timer_del(dev->rxp_timer); timer_free(dev->rxp_timer); } } diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -XXX,XX +XXX,XX @@ static void virtio_net_rsc_cleanup(VirtIONet *n) g_free(seg); } - timer_del(chain->drain_timer); timer_free(chain->drain_timer); QTAILQ_REMOVE(&n->rsc_chains, chain, next); g_free(chain); @@ -XXX,XX +XXX,XX @@ static void virtio_net_del_queue(VirtIONet *n, int index) virtio_del_queue(vdev, index * 2); if (q->tx_timer) { - timer_del(q->tx_timer); timer_free(q->tx_timer); q->tx_timer = NULL; } else { diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ void pci_dereg_ioat(S390PCIIOMMU *iommu) void fmb_timer_free(S390PCIBusDevice *pbdev) { if (pbdev->fmb_timer) { - timer_del(pbdev->fmb_timer); timer_free(pbdev->fmb_timer); pbdev->fmb_timer = NULL; } diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_instance_finalize(Object *obj) { SDState *sd = SD_CARD(obj); - timer_del(sd->ocr_power_timer); timer_free(sd->ocr_power_timer); } diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ void sdhci_initfn(SDHCIState *s) void sdhci_uninitfn(SDHCIState *s) { - timer_del(s->insert_timer); timer_free(s->insert_timer); - timer_del(s->transfer_timer); timer_free(s->transfer_timer); g_free(s->fifo_buffer); diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-hub.c +++ b/hw/usb/dev-hub.c @@ -XXX,XX +XXX,XX @@ static void usb_hub_unrealize(USBDevice *dev) &s->ports[i].port); } - timer_del(s->port_timer); timer_free(s->port_timer); } diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.c +++ b/hw/usb/hcd-ehci.c @@ -XXX,XX +XXX,XX @@ void usb_ehci_unrealize(EHCIState *s, DeviceState *dev) trace_usb_ehci_unrealize(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-ohci-pci.c b/hw/usb/hcd-ohci-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ohci-pci.c +++ b/hw/usb/hcd-ohci-pci.c @@ -XXX,XX +XXX,XX @@ static void usb_ohci_exit(PCIDevice *dev) usb_bus_release(&s->bus); } - timer_del(s->eof_timer); timer_free(s->eof_timer); } diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-uhci.c +++ b/hw/usb/hcd-uhci.c @@ -XXX,XX +XXX,XX @@ static void usb_uhci_exit(PCIDevice *dev) trace_usb_uhci_exit(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-xhci.c +++ b/hw/usb/hcd-xhci.c @@ -XXX,XX +XXX,XX @@ static void usb_xhci_unrealize(DeviceState *dev) } if (xhci->mfwrap_timer) { - timer_del(xhci->mfwrap_timer); timer_free(xhci->mfwrap_timer); xhci->mfwrap_timer = NULL; } diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/redirect.c +++ b/hw/usb/redirect.c @@ -XXX,XX +XXX,XX @@ static void usbredir_unrealize(USBDevice *udev) qemu_bh_delete(dev->chardev_close_bh); qemu_bh_delete(dev->device_reject_bh); - timer_del(dev->attach_timer); timer_free(dev->attach_timer); usbredir_cleanup_device_queues(dev); diff --git a/hw/vfio/display.c b/hw/vfio/display.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/display.c +++ b/hw/vfio/display.c @@ -XXX,XX +XXX,XX @@ static void vfio_display_edid_exit(VFIODisplay *dpy) g_free(dpy->edid_regs); g_free(dpy->edid_blob); - timer_del(dpy->edid_link_timer); timer_free(dpy->edid_link_timer); } diff --git a/hw/virtio/vhost-vsock-common.c b/hw/virtio/vhost-vsock-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost-vsock-common.c +++ b/hw/virtio/vhost-vsock-common.c @@ -XXX,XX +XXX,XX @@ static void vhost_vsock_common_post_load_timer_cleanup(VHostVSockCommon *vvc) return; } - timer_del(vvc->post_load_timer); timer_free(vvc->post_load_timer); vvc->post_load_timer = NULL; } diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -XXX,XX +XXX,XX @@ static bool balloon_stats_enabled(const VirtIOBalloon *s) static void balloon_stats_destroy_timer(VirtIOBalloon *s) { if (balloon_stats_enabled(s)) { - timer_del(s->stats_timer); timer_free(s->stats_timer); s->stats_timer = NULL; s->stats_poll_interval = 0; diff --git a/hw/virtio/virtio-rng.c b/hw/virtio/virtio-rng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-rng.c +++ b/hw/virtio/virtio-rng.c @@ -XXX,XX +XXX,XX @@ static void virtio_rng_device_unrealize(DeviceState *dev) VirtIORNG *vrng = VIRTIO_RNG(dev); qemu_del_vm_change_state_handler(vrng->vmstate); - timer_del(vrng->rate_limit_timer); timer_free(vrng->rate_limit_timer); virtio_del_queue(vdev, 0); virtio_cleanup(vdev); diff --git a/hw/watchdog/wdt_diag288.c b/hw/watchdog/wdt_diag288.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_diag288.c +++ b/hw/watchdog/wdt_diag288.c @@ -XXX,XX +XXX,XX @@ static void wdt_diag288_unrealize(DeviceState *dev) { DIAG288State *diag288 = DIAG288(dev); - timer_del(diag288->timer); timer_free(diag288->timer); } diff --git a/hw/watchdog/wdt_i6300esb.c b/hw/watchdog/wdt_i6300esb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_i6300esb.c +++ b/hw/watchdog/wdt_i6300esb.c @@ -XXX,XX +XXX,XX @@ static void i6300esb_exit(PCIDevice *dev) { I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev); - timer_del(d->timer); timer_free(d->timer); } diff --git a/migration/colo.c b/migration/colo.c index XXXXXXX..XXXXXXX 100644 --- a/migration/colo.c +++ b/migration/colo.c @@ -XXX,XX +XXX,XX @@ out: * error. */ colo_compare_unregister_notifier(&packets_compare_notifier); - timer_del(s->colo_delay_timer); timer_free(s->colo_delay_timer); qemu_event_destroy(&s->colo_checkpoint_event); diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/hmp-cmds.c +++ b/monitor/hmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void hmp_migrate_status_cb(void *opaque) error_report("%s", info->error_desc); } monitor_resume(status->mon); - timer_del(status->timer); timer_free(status->timer); g_free(status); } diff --git a/net/announce.c b/net/announce.c index XXXXXXX..XXXXXXX 100644 --- a/net/announce.c +++ b/net/announce.c @@ -XXX,XX +XXX,XX @@ void qemu_announce_timer_del(AnnounceTimer *timer, bool free_named) { bool free_timer = false; if (timer->tm) { - timer_del(timer->tm); timer_free(timer->tm); timer->tm = NULL; } diff --git a/net/colo-compare.c b/net/colo-compare.c index XXXXXXX..XXXXXXX 100644 --- a/net/colo-compare.c +++ b/net/colo-compare.c @@ -XXX,XX +XXX,XX @@ static void colo_compare_timer_init(CompareState *s) static void colo_compare_timer_del(CompareState *s) { if (s->packet_check_timer) { - timer_del(s->packet_check_timer); timer_free(s->packet_check_timer); s->packet_check_timer = NULL; } diff --git a/net/slirp.c b/net/slirp.c index XXXXXXX..XXXXXXX 100644 --- a/net/slirp.c +++ b/net/slirp.c @@ -XXX,XX +XXX,XX @@ static void *net_slirp_timer_new(SlirpTimerCb cb, static void net_slirp_timer_free(void *timer, void *opaque) { - timer_del(timer); timer_free(timer); } diff --git a/replay/replay-debugging.c b/replay/replay-debugging.c index XXXXXXX..XXXXXXX 100644 --- a/replay/replay-debugging.c +++ b/replay/replay-debugging.c @@ -XXX,XX +XXX,XX @@ static void replay_delete_break(void) assert(replay_mutex_locked()); if (replay_break_timer) { - timer_del(replay_break_timer); timer_free(replay_break_timer); replay_break_timer = NULL; } diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_finalize(Object *obj) #if !defined(CONFIG_USER_ONLY) S390CPU *cpu = S390_CPU(obj); - timer_del(cpu->env.tod_timer); timer_free(cpu->env.tod_timer); - timer_del(cpu->env.cpu_timer); timer_free(cpu->env.cpu_timer); qemu_unregister_reset(s390_cpu_machine_reset_cb, cpu); diff --git a/ui/console.c b/ui/console.c index XXXXXXX..XXXXXXX 100644 --- a/ui/console.c +++ b/ui/console.c @@ -XXX,XX +XXX,XX @@ static void gui_setup_refresh(DisplayState *ds) timer_mod(ds->gui_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME)); } if (!need_timer && ds->gui_timer != NULL) { - timer_del(ds->gui_timer); timer_free(ds->gui_timer); ds->gui_timer = NULL; } diff --git a/ui/spice-core.c b/ui/spice-core.c index XXXXXXX..XXXXXXX 100644 --- a/ui/spice-core.c +++ b/ui/spice-core.c @@ -XXX,XX +XXX,XX @@ static void timer_cancel(SpiceTimer *timer) static void timer_remove(SpiceTimer *timer) { - timer_del(timer->timer); timer_free(timer->timer); g_free(timer); } diff --git a/util/throttle.c b/util/throttle.c index XXXXXXX..XXXXXXX 100644 --- a/util/throttle.c +++ b/util/throttle.c @@ -XXX,XX +XXX,XX @@ static void throttle_timer_destroy(QEMUTimer **timer) { assert(*timer != NULL); - timer_del(*timer); timer_free(*timer); *timer = NULL; } -- 2.20.1 The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(), timer_free() to free the timer. The timer_deinit() step in this was always unnecessary, and now the timer_del() is implied by timer_free(), so we can collapse this down to simply calling timer_free(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-5-peter.maydell@linaro.org --- target/arm/cpu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { - timer_del(cpu->pmu_timer); - timer_deinit(cpu->pmu_timer); timer_free(cpu->pmu_timer); } #endif -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the digic_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 3 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/digic-timer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static void digic_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void digic_timer_finalize(Object *obj) +{ + DigicTimerState *s = DIGIC_TIMER(obj); + + ptimer_free(s->ptimer); +} + static void digic_timer_class_init(ObjectClass *klass, void *class_data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo digic_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(DigicTimerState), .instance_init = digic_timer_init, + .instance_finalize = digic_timer_finalize, .class_init = digic_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the a10_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 6 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49 #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/allwinner-a10-pit.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/allwinner-a10-pit.c +++ b/hw/timer/allwinner-a10-pit.c @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) } } +static void a10_pit_finalize(Object *obj) +{ + AwA10PITState *s = AW_A10_PIT(obj); + int i; + + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) { + ptimer_free(s->timer[i]); + } +} + static void a10_pit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo a10_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AwA10PITState), .instance_init = a10_pit_init, + .instance_finalize = a10_pit_finalize, .class_init = a10_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_rtc_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf57b3934 in exynos4210_rtc_init /qemu/hw/rtc/exynos4210_rtc.c:567 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/rtc/exynos4210_rtc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/rtc/exynos4210_rtc.c b/hw/rtc/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/exynos4210_rtc.c +++ b/hw/rtc/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_rtc_finalize(Object *obj) +{ + Exynos4210RTCState *s = EXYNOS4210_RTC(obj); + + ptimer_free(s->ptimer); + ptimer_free(s->ptimer_1Hz); +} + static void exynos4210_rtc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_rtc_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210RTCState), .instance_init = exynos4210_rtc_init, + .instance_finalize = exynos4210_rtc_finalize, .class_init = exynos4210_rtc_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_pwm_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 240 byte(s) in 5 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_pwm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_pwm_finalize(Object *obj) +{ + Exynos4210PWMState *s = EXYNOS4210_PWM(obj); + int i; + + for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static void exynos4210_pwm_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_pwm_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210PWMState), .instance_init = exynos4210_pwm_init, + .instance_finalize = exynos4210_pwm_finalize, .class_init = exynos4210_pwm_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mss_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 2 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/mss-timer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/mss-timer.c +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ static void mss_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); } +static void mss_timer_finalize(Object *obj) +{ + MSSTimerState *t = MSS_TIMER(obj); + int i; + + for (i = 0; i < NUM_TIMERS; i++) { + struct Msf2Timer *st = &t->timers[i]; + + ptimer_free(st->ptimer); + } +} + static const VMStateDescription vmstate_timers = { .name = "mss-timer-block", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mss_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(MSSTimerState), .instance_init = mss_timer_init, + .instance_finalize = mss_timer_finalize, .class_init = mss_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mv88w8618_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 4 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf5bb2290 in mv88w8618_timer_init /qemu/hw/arm/musicpal.c:862 #7 0xaaabf5bb2290 in mv88w8618_pit_init /qemu/hw/arm/musicpal.c:954 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf5a95540 in qdev_device_help /qemu/softmmu/qdev-monitor.c:283 #12 0xaaabf5a96940 in qmp_device_add /qemu/softmmu/qdev-monitor.c:801 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void mv88w8618_pit_finalize(Object *obj) +{ + SysBusDevice *dev = SYS_BUS_DEVICE(obj); + mv88w8618_pit_state *s = MV88W8618_PIT(dev); + int i; + + for (i = 0; i < 4; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static const VMStateDescription mv88w8618_timer_vmsd = { .name = "timer", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mv88w8618_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(mv88w8618_pit_state), .instance_init = mv88w8618_pit_init, + .instance_finalize = mv88w8618_pit_finalize, .class_init = mv88w8618_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_mct_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf56b01a0 in exynos4210_mct_init /qemu/hw/timer/exynos4210_mct.c:1505 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_mct_finalize(Object *obj) +{ + int i; + Exynos4210MCTState *s = EXYNOS4210_MCT(obj); + + ptimer_free(s->g_timer.ptimer_frc); + + for (i = 0; i < 2; i++) { + ptimer_free(s->l_timer[i].tick_timer.ptimer_tick); + ptimer_free(s->l_timer[i].ptimer_frc); + } +} + static void exynos4210_mct_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_mct_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210MCTState), .instance_init = exynos4210_mct_init, + .instance_finalize = exynos4210_mct_finalize, .class_init = exynos4210_mct_class_init, }; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> U-Boot expects PMU_MISC0 register bit 7 is set (see init_bandgap() in arch/arm/mach-imx/mx6/soc.c) during boot. This bit indicates the bandgap has stabilized. With this change, the latest upstream U-Boot (v2021.01-rc3) for imx6 sabrelite board (mx6qsabrelite_defconfig), with a slight change made by switching CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, boots to U-Boot shell on QEMU with the following command: $ qemu-system-arm -M sabrelite -smp 4 -m 1G -kernel u-boot \ -display none -serial null -serial stdio Boot log below: U-Boot 2021.01-rc3 (Dec 12 2020 - 17:40:02 +0800) CPU: Freescale i.MX?? rev1.0 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB force_idle_bus: sda=0 scl=0 sda.gp=0x5c scl.gp=0x55 force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0x6d scl.gp=0x6c force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0xcb scl.gp=0x5 force_idle_bus: failed to clear bus, sda=0 scl=0 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - No block device, using default environment In: serial Out: serial Err: serial Net: Board Net Initialization Failed No ethernet found. starting USB... Bus usb@2184000: usb dr_mode not found USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 0 => Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[PMU_REG_3P0] = 0x00000F74; s->analog[PMU_REG_2P5] = 0x00005071; s->analog[PMU_REG_CORE] = 0x00402010; - s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC0] = 0x04000080; s->analog[PMU_MISC1] = 0x00000000; s->analog[PMU_MISC2] = 0x00272727; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> Currently when U-Boot boots, it prints "??" for i.MX processor: CPU: Freescale i.MX?? rev1.0 at 792 MHz The register that was used to determine the silicon type is undocumented in the latest IMX6DQRM (Rev. 6, 05/2020), but we can refer to get_cpu_rev() in arch/arm/mach-imx/mx6/soc.c in the U-Boot source codes that USB_ANALOG_DIGPROG is used. Update its reset value to indicate i.MX6Q. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-3-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x00000004; s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; - s->analog[USB_ANALOG_DIGPROG] = 0x00000000; + s->analog[USB_ANALOG_DIGPROG] = 0x00630000; /* all PLLs need to be locked */ s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> At present, when booting U-Boot on QEMU sabrelite, we see: Net: Board Net Initialization Failed No ethernet found. U-Boot scans PHY at address 4/5/6/7 (see board_eth_init() in the U-Boot source: board/boundary/nitrogen6x/nitrogen6x.c). On the real board, the Ethernet PHY is at address 6. Adjust this by updating the "fec-phy-num" property of the fsl_imx6 SoC object. With this change, U-Boot sees the PHY but complains MAC address: Net: using phy at 6 FEC [PRIME] Error: FEC address not set. This is due to U-Boot tries to read the MAC address from the fuse, which QEMU does not have any valid content filled in. However this does not prevent the Ethernet from working in QEMU. We just need to set up the MAC address later in the U-Boot command shell, by: => setenv ethaddr 00:11:22:33:44:55 Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-4-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sabrelite.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/sabrelite.c b/hw/arm/sabrelite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sabrelite.c +++ b/hw/arm/sabrelite.c @@ -XXX,XX +XXX,XX @@ static void sabrelite_init(MachineState *machine) s = FSL_IMX6(object_new(TYPE_FSL_IMX6)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + + /* Ethernet PHY address is 6 */ + object_property_set_int(OBJECT(s), "fec-phy-num", 6, &error_fatal); + qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR, -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> This adds the target guide for SABRE Lite board, and documents how to boot a Linux kernel and U-Boot bootloader. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-5-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 120 insertions(+) create mode 100644 docs/system/arm/sabrelite.rst diff --git a/docs/system/arm/sabrelite.rst b/docs/system/arm/sabrelite.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/sabrelite.rst @@ -XXX,XX +XXX,XX @@ +Boundary Devices SABRE Lite (``sabrelite``) +=========================================== + +Boundary Devices SABRE Lite i.MX6 Development Board is a low-cost development +platform featuring the powerful Freescale / NXP Semiconductor's i.MX 6 Quad +Applications Processor. + +Supported devices +----------------- + +The SABRE Lite machine supports the following devices: + + * Up to 4 Cortex A9 cores + * Generic Interrupt Controller + * 1 Clock Controller Module + * 1 System Reset Controller + * 5 UARTs + * 2 EPIC timers + * 1 GPT timer + * 2 Watchdog timers + * 1 FEC Ethernet controller + * 3 I2C controllers + * 7 GPIO controllers + * 4 SDHC storage controllers + * 4 USB 2.0 host controllers + * 5 ECSPI controllers + * 1 SST 25VF016B flash + +Please note above list is a complete superset the QEMU SABRE Lite machine can +support. For a normal use case, a device tree blob that represents a real world +SABRE Lite board, only exposes a subset of devices to the guest software. + +Boot options +------------ + +The SABRE Lite machine can start using the standard -kernel functionality +for loading a Linux kernel, U-Boot bootloader or ELF executable. + +Running Linux kernel +-------------------- + +Linux mainline v5.10 release is tested at the time of writing. To build a Linux +mainline kernel that can be booted by the SABRE Lite machine, simply configure +the kernel using the imx_v6_v7_defconfig configuration: + +.. code-block:: bash + + $ export ARCH=arm + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make imx_v6_v7_defconfig + $ make + +To boot the newly built Linux kernel in QEMU with the SABRE Lite machine, use: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/imx6q-sabrelite.dtb \ + -initrd /path/to/rootfs.ext4 \ + -append "root=/dev/ram" + +Running U-Boot +-------------- + +U-Boot mainline v2020.10 release is tested at the time of writing. To build a +U-Boot mainline bootloader that can be booted by the SABRE Lite machine, use +the mx6qsabrelite_defconfig with similar commands as described above for Linux: + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make mx6qsabrelite_defconfig + +Note we need to adjust settings by: + +.. code-block:: bash + + $ make menuconfig + +then manually select the following configuration in U-Boot: + + Device Tree Control > Provider of DTB for DT Control > Embedded DTB + +To start U-Boot using the SABRE Lite machine, provide the u-boot binary to +the -kernel argument, along with an SD card image with rootfs: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel u-boot + +The following example shows booting Linux kernel from dhcp, and uses the +rootfs on an SD card. This requires some additional command line parameters +for QEMU: + +.. code-block:: none + + -nic user,tftp=/path/to/kernel/zImage \ + -drive file=sdcard.img,id=rootfs -device sd-card,drive=rootfs + +The directory for the built-in TFTP server should also contain the device tree +blob of the SABRE Lite board. The sample SD card image was populated with the +root file system with one single partition. You may adjust the kernel "root=" +boot parameter accordingly. + +After U-Boot boots, type the following commands in the U-Boot command shell to +boot the Linux kernel: + +.. code-block:: none + + => setenv ethaddr 00:11:22:33:44:55 + => setenv bootfile zImage + => dhcp + => tftpboot 14000000 imx6q-sabrelite.dtb + => setenv bootargs root=/dev/mmcblk3p1 + => bootz 12000000 - 14000000 diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/versatile arm/vexpress arm/aspeed + arm/sabrelite arm/digic arm/musicpal arm/gumstix -- 2.20.1