arm pullreq for rc1. All minor bugfixes, except for the sve-default-vector-length

patches, which are somewhere between a bugfix and a new feature.

The following changes since commit c08ccd1b53f488ac86c1f65cf7623dc91acc249a:

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210726' into staging (2021-07-27 08:35:01 +0100)

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210727

for you to fetch changes up to e229a179a503f2aee43a76888cf12fbdfe8a3749:

hw: aspeed_gpio: Fix memory size (2021-07-27 11:00:00 +0100)

* hw/arm/smmuv3: Check 31st bit to see if CD is valid

* qemu-options.hx: Fix formatting of -machine memory-backend option

* hw: aspeed_gpio: Fix memory size

* hw/arm/nseries: Display hexadecimal value with '0x' prefix

* Add sve-default-vector-length cpu property

* docs: Update path that mentions deprecated.rst

* hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS

* hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING

* hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts

* target/arm: Report M-profile alignment faults correctly to the guest

* target/arm: Add missing 'return's after calling v7m_exception_taken()

* target/arm: Enforce that M-profile SP low 2 bits are always zero

Joe Komlodi (1):

hw/arm/smmuv3: Check 31st bit to see if CD is valid

Joel Stanley (1):

hw: aspeed_gpio: Fix memory size

Mao Zhongyi (1):

docs: Update path that mentions deprecated.rst

Peter Maydell (7):

qemu-options.hx: Fix formatting of -machine memory-backend option

target/arm: Enforce that M-profile SP low 2 bits are always zero

target/arm: Add missing 'return's after calling v7m_exception_taken()

target/arm: Report M-profile alignment faults correctly to the guest

hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts

hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING

hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS

hw/arm/nseries: Display hexadecimal value with '0x' prefix

target/arm: Correctly bound length in sve_zcr_get_valid_len

target/arm: Export aarch64_sve_zcr_get_valid_len

target/arm: Add sve-default-vector-length cpu property

docs/system/arm/cpu-features.rst | 15 ++++++++++

configure | 2 +-

hw/arm/smmuv3-internal.h | 2 +-

target/arm/cpu.h | 5 ++++

target/arm/internals.h | 10 +++++++

hw/arm/nseries.c | 2 +-

hw/gpio/aspeed_gpio.c | 3 +-

hw/intc/armv7m_nvic.c | 40 +++++++++++++++++++--------

target/arm/cpu.c | 14 ++++++++--

target/arm/cpu64.c | 60 ++++++++++++++++++++++++++++++++++++++++

target/arm/gdbstub.c | 4 +++

target/arm/helper.c | 8 ++++--

target/arm/m_helper.c | 24 ++++++++++++----

target/arm/translate.c | 3 ++

target/i386/cpu.c | 2 +-

MAINTAINERS | 2 +-

qemu-options.hx | 30 +++++++++++---------

17 files changed, 183 insertions(+), 43 deletions(-)

From: Joe Komlodi <joe.komlodi@xilinx.com>

The bit to see if a CD is valid is the last bit of the first word of the CD.

Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com>

Message-id: 1626728232-134665-2-git-send-email-joe.komlodi@xilinx.com

hw/arm/smmuv3-internal.h | 2 +-

1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h

--- a/hw/arm/smmuv3-internal.h

+++ b/hw/arm/smmuv3-internal.h

@@ -XXX,XX +XXX,XX @@ static inline int pa_range(STE *ste)

/* CD fields */

-#define CD_VALID(x) extract32((x)->word[0], 30, 1)

+#define CD_VALID(x) extract32((x)->word[0], 31, 1)

#define CD_ASID(x) extract32((x)->word[1], 16, 16)

#define CD_TTB(x, sel) \

({ \

Currently, our only caller is sve_zcr_len_for_el, which has

already masked the length extracted from ZCR_ELx, so the

masking done here is a nop. But we will shortly have uses

from other locations, where the length will be unmasked.

Saturate the length to ARM_MAX_VQ instead of truncating to

the low 4 bits.

target/arm/helper.c | 4 +++-

1 file changed, 3 insertions(+), 1 deletion(-)

@@ -XXX,XX +XXX,XX @@ static uint32_t sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len)

{

uint32_t end_len;

- end_len = start_len &= 0xf;

+ start_len = MIN(start_len, ARM_MAX_VQ - 1);

+ end_len = start_len;

if (!test_bit(start_len, cpu->sve_vq_map)) {

end_len = find_last_bit(cpu->sve_vq_map, start_len);

assert(end_len < start_len);

Rename from sve_zcr_get_valid_len and make accessible

from outside of helper.c.

target/arm/internals.h | 10 ++++++++++

target/arm/helper.c | 4 ++--

2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h

--- a/target/arm/internals.h

+++ b/target/arm/internals.h

@@ -XXX,XX +XXX,XX @@ void arm_translate_init(void);

void arm_cpu_synchronize_from_tb(CPUState *cs, const TranslationBlock *tb);

#endif /* CONFIG_TCG */

+/**

+ * aarch64_sve_zcr_get_valid_len:

+ * @cpu: cpu context

+ * @start_len: maximum len to consider

+ *

+ * Return the maximum supported sve vector length <= @start_len.

+ * Note that both @start_len and the return value are in units

+ * of ZCR_ELx.LEN, so the vector bit length is (x + 1) * 128.

+ */

+uint32_t aarch64_sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len);

enum arm_fprounding {

FPROUNDING_TIEEVEN,

diff --git a/target/arm/helper.c b/target/arm/helper.c

index XXXXXXX..XXXXXXX 100644

--- a/target/arm/helper.c

+++ b/target/arm/helper.c

@@ -XXX,XX +XXX,XX @@ int sve_exception_el(CPUARMState *env, int el)

return 0;

}

-static uint32_t sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len)

+uint32_t aarch64_sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len)

uint32_t end_len;

@@ -XXX,XX +XXX,XX @@ uint32_t sve_zcr_len_for_el(CPUARMState *env, int el)

zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[3]);

- return sve_zcr_get_valid_len(cpu, zcr_len);

+ return aarch64_sve_zcr_get_valid_len(cpu, zcr_len);

}

static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri,

Mirror the behavour of /proc/sys/abi/sve_default_vector_length

under the real linux kernel. We have no way of passing along

a real default across exec like the kernel can, but this is a

decent way of adjusting the startup vector length of a process.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/482

docs/system/arm/cpu-features.rst | 15 ++++++++

target/arm/cpu.h | 5 +++

target/arm/cpu.c | 14 ++++++--

target/arm/cpu64.c | 60 ++++++++++++++++++++++++++++++++

4 files changed, 92 insertions(+), 2 deletions(-)

diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst

--- a/docs/system/arm/cpu-features.rst

+++ b/docs/system/arm/cpu-features.rst

@@ -XXX,XX +XXX,XX @@ verbose command lines. However, the recommended way to select vector

lengths is to explicitly enable each desired length. Therefore only

example's (1), (4), and (6) exhibit recommended uses of the properties.

+SVE User-mode Default Vector Length Property

+--------------------------------------------

+For qemu-aarch64, the cpu property ``sve-default-vector-length=N`` is

+defined to mirror the Linux kernel parameter file

+``/proc/sys/abi/sve_default_vector_length``. The default length, ``N``,

+is in units of bytes and must be between 16 and 8192.

+If not specified, the default vector length is 64.

+

+If the default length is larger than the maximum vector length enabled,

+the actual vector length will be reduced. Note that the maximum vector

+length supported by QEMU is 256.

+

+If this property is set to ``-1`` then the default vector length

+is set to the maximum possible length.

diff --git a/target/arm/cpu.h b/target/arm/cpu.h

index XXXXXXX..XXXXXXX 100644

--- a/target/arm/cpu.h

+++ b/target/arm/cpu.h

@@ -XXX,XX +XXX,XX @@ struct ARMCPU {

/* Used to set the maximum vector length the cpu will support. */

uint32_t sve_max_vq;

+#ifdef CONFIG_USER_ONLY

+ /* Used to set the default vector length at process start. */

+ uint32_t sve_default_vq;

+#endif

+

/*

* In sve_vq_map each set bit is a supported vector length of

* (bit-number + 1) * 16 bytes, i.e. each bit number + 1 is the vector

diff --git a/target/arm/cpu.c b/target/arm/cpu.c

index XXXXXXX..XXXXXXX 100644

--- a/target/arm/cpu.c

+++ b/target/arm/cpu.c

@@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev)

env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3);

/* with reasonable vector length */

if (cpu_isar_feature(aa64_sve, cpu)) {

- env->vfp.zcr_el[1] = MIN(cpu->sve_max_vq - 1, 3);

+ env->vfp.zcr_el[1] =

+ aarch64_sve_zcr_get_valid_len(cpu, cpu->sve_default_vq - 1);

}

/*

* Enable TBI0 but not TBI1.

@@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj)

QLIST_INIT(&cpu->pre_el_change_hooks);

QLIST_INIT(&cpu->el_change_hooks);

-#ifndef CONFIG_USER_ONLY

+#ifdef CONFIG_USER_ONLY

+# ifdef TARGET_AARCH64

+ /*

+ * The linux kernel defaults to 512-bit vectors, when sve is supported.

+ * See documentation for /proc/sys/abi/sve_default_vector_length, and

+ * our corresponding sve-default-vector-length cpu property.

+ */

+ cpu->sve_default_vq = 4;

+# endif

+#else

/* Our inbound IRQ and FIQ lines */

if (kvm_enabled()) {

/* VIRQ and VFIQ are unused with KVM but we add them to maintain

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c

index XXXXXXX..XXXXXXX 100644

--- a/target/arm/cpu64.c

+++ b/target/arm/cpu64.c

@@ -XXX,XX +XXX,XX @@ static void cpu_arm_set_sve(Object *obj, bool value, Error **errp)

cpu->isar.id_aa64pfr0 = t;

}

+#ifdef CONFIG_USER_ONLY

+/* Mirror linux /proc/sys/abi/sve_default_vector_length. */

+static void cpu_arm_set_sve_default_vec_len(Object *obj, Visitor *v,

+ const char *name, void *opaque,

+ Error **errp)

+{

+ ARMCPU *cpu = ARM_CPU(obj);

+ int32_t default_len, default_vq, remainder;

+

+ if (!visit_type_int32(v, name, &default_len, errp)) {

+ return;

+ }

+

+ /* Undocumented, but the kernel allows -1 to indicate "maximum". */

+ if (default_len == -1) {

+ cpu->sve_default_vq = ARM_MAX_VQ;

+ return;

+ }

+

+ default_vq = default_len / 16;

+ remainder = default_len % 16;

+

+ /*

+ * Note that the 512 max comes from include/uapi/asm/sve_context.h

+ * and is the maximum architectural width of ZCR_ELx.LEN.

+ */

+ if (remainder || default_vq < 1 || default_vq > 512) {

+ error_setg(errp, "cannot set sve-default-vector-length");

+ if (remainder) {

+ error_append_hint(errp, "Vector length not a multiple of 16\n");

+ } else if (default_vq < 1) {

+ error_append_hint(errp, "Vector length smaller than 16\n");

+ } else {

+ error_append_hint(errp, "Vector length larger than %d\n",

+ 512 * 16);

+ }

+ return;

+ }

+

+ cpu->sve_default_vq = default_vq;

+}

+

+static void cpu_arm_get_sve_default_vec_len(Object *obj, Visitor *v,

+ const char *name, void *opaque,

+ Error **errp)

+{

+ ARMCPU *cpu = ARM_CPU(obj);

+ int32_t value = cpu->sve_default_vq * 16;

+

+ visit_type_int32(v, name, &value, errp);

+}

+#endif

+

void aarch64_add_sve_properties(Object *obj)

{

uint32_t vq;

@@ -XXX,XX +XXX,XX @@ void aarch64_add_sve_properties(Object *obj)

object_property_add(obj, name, "bool", cpu_arm_get_sve_vq,

cpu_arm_set_sve_vq, NULL, NULL);

}

+

+#ifdef CONFIG_USER_ONLY

+ /* Mirror linux /proc/sys/abi/sve_default_vector_length. */

+ object_property_add(obj, "sve-default-vector-length", "int32",

+ cpu_arm_get_sve_default_vec_len,

+ cpu_arm_set_sve_default_vec_len, NULL, NULL);

+#endif

}

void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp)

From: Joel Stanley <joel@jms.id.au>

The macro used to calculate the maximum memory size of the MMIO region

had a mistake, causing all GPIO models to create a mapping of 0x9D8.

The intent was to have it be 0x9D8 - 0x800.

This extra size doesn't matter on ast2400 and ast2500, which have a 4KB

region set aside for the GPIO controller.

On the ast2600 the 3.3V and 1.8V GPIO controllers are 2KB apart, so the

regions would overlap. Worse was the 1.8V controller would map over the

top of the following peripheral, which happens to be the RTC.

The mmio region used by each device is a maximum of 2KB, so avoid the

calculations and hard code this as the maximum.

Fixes: 36d737ee82b2 ("hw/gpio: Add in AST2600 specific implementation")

Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>

Reviewed-by: Cédric Le Goater <clg@kaod.org>

Message-id: 20210713065854.134634-2-joel@jms.id.au

[PMM: fix autocorrect error in commit message]

hw/gpio/aspeed_gpio.c | 3 +--

1 file changed, 1 insertion(+), 2 deletions(-)