Nothing much exciting here, but it's 37 patches worth... thanks -- PMM The following changes since commit e64a62df378a746c0b257105959613c9f8122e59: Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-040320-1' into staging (2020-03-05 12:13:51 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200305 for you to fetch changes up to 597d61a3b1f94c53a3aaa77671697c0c5f797dbf: target/arm: Clean address for DC ZVA (2020-03-05 16:09:21 +0000) ---------------------------------------------------------------- * versal: Implement ADMA * Implement (trivially) ARMv8.2-TTCNP * hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus * Remove unnecessary endianness-handling on some boards * Avoid minor memory leaks from timer_new in some devices * Honour more of the HCR_EL2 trap bits * Complain rather than ignoring bad command line options for cubieboard * Honour TBI for DC ZVA and exception return ---------------------------------------------------------------- Edgar E. Iglesias (2): hw/arm: versal: Add support for the LPD ADMAs hw/arm: versal: Generate xlnx-versal-virt zdma FDT nodes Eric Auger (1): hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus Niek Linnenbank (4): hw/arm/cubieboard: use ARM Cortex-A8 as the default CPU in machine definition hw/arm/cubieboard: restrict allowed CPU type to ARM Cortex-A8 hw/arm/cubieboard: restrict allowed RAM size to 512MiB and 1GiB hw/arm/cubieboard: report error when using unsupported -bios argument Pan Nengyuan (4): hw/arm/pxa2xx: move timer_new from init() into realize() to avoid memleaks hw/arm/spitz: move timer_new from init() into realize() to avoid memleaks hw/arm/strongarm: move timer_new from init() into realize() to avoid memleaks hw/timer/cadence_ttc: move timer_new from init() into realize() to avoid memleaks Peter Maydell (1): target/arm: Implement (trivially) ARMv8.2-TTCNP Philippe Mathieu-Daudé (6): hw/arm/smmu-common: Simplify smmu_find_smmu_pcibus() logic hw/arm/gumstix: Simplify since the machines are little-endian only hw/arm/mainstone: Simplify since the machines are little-endian only hw/arm/omap_sx1: Simplify since the machines are little-endian only hw/arm/z2: Simplify since the machines are little-endian only hw/arm/musicpal: Simplify since the machines are little-endian only Richard Henderson (19): target/arm: Improve masking of HCR/HCR2 RES0 bits target/arm: Add HCR_EL2 bit definitions from ARMv8.6 target/arm: Disable has_el2 and has_el3 for user-only target/arm: Remove EL2 and EL3 setup from user-only target/arm: Improve masking in arm_hcr_el2_eff target/arm: Honor the HCR_EL2.{TVM,TRVM} bits target/arm: Honor the HCR_EL2.TSW bit target/arm: Honor the HCR_EL2.TACR bit target/arm: Honor the HCR_EL2.TPCP bit target/arm: Honor the HCR_EL2.TPU bit target/arm: Honor the HCR_EL2.TTLB bit tests/tcg/aarch64: Add newline in pauth-1 printf target/arm: Replicate TBI/TBID bits for single range regimes target/arm: Optimize cpu_mmu_index target/arm: Introduce core_to_aa64_mmu_idx target/arm: Apply TBI to ESR_ELx in helper_exception_return target/arm: Move helper_dc_zva to helper-a64.c target/arm: Use DEF_HELPER_FLAGS for helper_dc_zva target/arm: Clean address for DC ZVA include/hw/arm/xlnx-versal.h | 6 + target/arm/cpu.h | 30 ++-- target/arm/helper-a64.h | 1 + target/arm/helper.h | 1 - target/arm/internals.h | 6 + hw/arm/cubieboard.c | 29 +++- hw/arm/gumstix.c | 16 +- hw/arm/mainstone.c | 8 +- hw/arm/musicpal.c | 10 -- hw/arm/omap_sx1.c | 11 +- hw/arm/pxa2xx.c | 17 +- hw/arm/smmu-common.c | 20 +-- hw/arm/spitz.c | 8 +- hw/arm/strongarm.c | 18 ++- hw/arm/xlnx-versal-virt.c | 28 ++++ hw/arm/xlnx-versal.c | 24 +++ hw/arm/z2.c | 8 +- hw/timer/cadence_ttc.c | 18 ++- target/arm/cpu.c | 13 +- target/arm/cpu64.c | 2 + target/arm/helper-a64.c | 114 ++++++++++++- target/arm/helper.c | 373 ++++++++++++++++++++++++++++++------------- target/arm/op_helper.c | 93 ----------- target/arm/translate-a64.c | 4 +- tests/tcg/aarch64/pauth-1.c | 2 +- 25 files changed, 551 insertions(+), 309 deletions(-) From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Add support for the Versal LPD ADMAs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 6 ++++++ hw/arm/xlnx-versal.c | 24 ++++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #define XLNX_VERSAL_NR_ACPUS 2 #define XLNX_VERSAL_NR_UARTS 2 #define XLNX_VERSAL_NR_GEMS 2 +#define XLNX_VERSAL_NR_ADMAS 8 #define XLNX_VERSAL_NR_IRQS 192 typedef struct Versal { @@ -XXX,XX +XXX,XX @@ typedef struct Versal { struct { SysBusDevice *uart[XLNX_VERSAL_NR_UARTS]; SysBusDevice *gem[XLNX_VERSAL_NR_GEMS]; + SysBusDevice *adma[XLNX_VERSAL_NR_ADMAS]; } iou; } lpd; @@ -XXX,XX +XXX,XX @@ typedef struct Versal { #define VERSAL_GEM0_WAKE_IRQ_0 57 #define VERSAL_GEM1_IRQ_0 58 #define VERSAL_GEM1_WAKE_IRQ_0 59 +#define VERSAL_ADMA_IRQ_0 60 /* Architecturally reserved IRQs suitable for virtualization. */ #define VERSAL_RSVD_IRQ_FIRST 111 @@ -XXX,XX +XXX,XX @@ typedef struct Versal { #define MM_GEM1 0xff0d0000U #define MM_GEM1_SIZE 0x10000 +#define MM_ADMA_CH0 0xffa80000U +#define MM_ADMA_CH0_SIZE 0x10000 + #define MM_OCM 0xfffc0000U #define MM_OCM_SIZE 0x40000 diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_gems(Versal *s, qemu_irq *pic) } } +static void versal_create_admas(Versal *s, qemu_irq *pic) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.adma); i++) { + char *name = g_strdup_printf("adma%d", i); + DeviceState *dev; + MemoryRegion *mr; + + dev = qdev_create(NULL, "xlnx.zdma"); + s->lpd.iou.adma[i] = SYS_BUS_DEVICE(dev); + object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); + qdev_init_nofail(dev); + + mr = sysbus_mmio_get_region(s->lpd.iou.adma[i], 0); + memory_region_add_subregion(&s->mr_ps, + MM_ADMA_CH0 + i * MM_ADMA_CH0_SIZE, mr); + + sysbus_connect_irq(s->lpd.iou.adma[i], 0, pic[VERSAL_ADMA_IRQ_0 + i]); + g_free(name); + } +} + /* This takes the board allocated linear DDR memory and creates aliases * for each split DDR range/aperture on the Versal address map. */ @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_apu_gic(s, pic); versal_create_uarts(s, pic); versal_create_gems(s, pic); + versal_create_admas(s, pic); versal_map_ddr(s); versal_unimp(s); -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Generate xlnx-versal-virt zdma FDT nodes. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-versal-virt.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_gem_nodes(VersalVirt *s) } } +static void fdt_add_zdma_nodes(VersalVirt *s) +{ + const char clocknames[] = "clk_main\0clk_apb"; + const char compat[] = "xlnx,zynqmp-dma-1.0"; + int i; + + for (i = XLNX_VERSAL_NR_ADMAS - 1; i >= 0; i--) { + uint64_t addr = MM_ADMA_CH0 + MM_ADMA_CH0_SIZE * i; + char *name = g_strdup_printf("/dma@%" PRIx64, addr); + + qemu_fdt_add_subnode(s->fdt, name); + + qemu_fdt_setprop_cell(s->fdt, name, "xlnx,bus-width", 64); + qemu_fdt_setprop_cells(s->fdt, name, "clocks", + s->phandle.clk_25Mhz, s->phandle.clk_25Mhz); + qemu_fdt_setprop(s->fdt, name, "clock-names", + clocknames, sizeof(clocknames)); + qemu_fdt_setprop_cells(s->fdt, name, "interrupts", + GIC_FDT_IRQ_TYPE_SPI, VERSAL_ADMA_IRQ_0 + i, + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, addr, 2, 0x1000); + qemu_fdt_setprop(s->fdt, name, "compatible", compat, sizeof(compat)); + g_free(name); + } +} + static void fdt_nop_memory_nodes(void *fdt, Error **errp) { Error *err = NULL; @@ -XXX,XX +XXX,XX @@ static void versal_virt_init(MachineState *machine) fdt_add_uart_nodes(s); fdt_add_gic_nodes(s); fdt_add_timer_nodes(s); + fdt_add_zdma_nodes(s); fdt_add_cpu_nodes(s, psci_conduit); fdt_add_clk_node(s, "/clk125", 125000000, s->phandle.clk_125Mhz); fdt_add_clk_node(s, "/clk25", 25000000, s->phandle.clk_25Mhz); -- 2.20.1 The ARMv8.2-TTCNP extension allows an implementation to optimize by sharing TLB entries between multiple cores, provided that software declares that it's ready to deal with this by setting a CnP bit in the TTBRn_ELx. It is mandatory from ARMv8.2 onward. For QEMU's TLB implementation, sharing TLB entries between different cores would not really benefit us and would be a lot of work to implement. So we implement this extension in the "trivial" manner: we allow the guest to set and read back the CnP bit, but don't change our behaviour (this is an architecturally valid implementation choice). The only code path which looks at the TTBRn_ELx values for the long-descriptor format where the CnP bit is defined is already doing enough masking to not get confused when the CnP bit at the bottom of the register is set, so we can simply add a comment noting why we're relying on that mask. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200225193822.18874-1-peter.maydell@linaro.org --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 2 ++ target/arm/helper.c | 4 ++++ 3 files changed, 7 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = cpu->isar.id_mmfr4; t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ cpu->isar.id_mmfr4 = t; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); + t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ cpu->isar.id_aa64mmfr2 = t; /* Replicate the same data to the 32-bit id registers. */ @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) u = cpu->isar.id_mmfr4; u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + u = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ cpu->isar.id_mmfr4 = u; u = cpu->isar.id_aa64dfr0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, /* Now we can extract the actual base address from the TTBR */ descaddr = extract64(ttbr, 0, 48); + /* + * We rely on this masking to clear the RES0 bits at the bottom of the TTBR + * and also to mask out CnP (bit 0) which could validly be non-zero. + */ descaddr &= ~indexmask; /* The address field in the descriptor goes up to bit 39 for ARMv7 -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Make sure a null SMMUPciBus is returned in case we were not able to identify a pci bus matching the @bus_num. This matches the fix done on intel iommu in commit: a2e1cd41ccfe796529abfd1b6aeb1dd4393762a2 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200226172628.17449-1-eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUPciBus *smmu_find_smmu_pcibus(SMMUState *s, uint8_t bus_num) return smmu_pci_bus; } } + smmu_pci_bus = NULL; } return smmu_pci_bus; } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The smmu_find_smmu_pcibus() function was introduced (in commit cac994ef43b) in a code format that could return an incorrect pointer, which was then fixed by the previous commit. We could have avoided this by writing the if() statement differently. Do it now, in case this function is re-used. The code is easier to review (harder to miss bugs). Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, SMMUPciBus *smmu_find_smmu_pcibus(SMMUState *s, uint8_t bus_num) { SMMUPciBus *smmu_pci_bus = s->smmu_pcibus_by_bus_num[bus_num]; + GHashTableIter iter; - if (!smmu_pci_bus) { - GHashTableIter iter; - - g_hash_table_iter_init(&iter, s->smmu_pcibus_by_busptr); - while (g_hash_table_iter_next(&iter, NULL, (void **)&smmu_pci_bus)) { - if (pci_bus_num(smmu_pci_bus->bus) == bus_num) { - s->smmu_pcibus_by_bus_num[bus_num] = smmu_pci_bus; - return smmu_pci_bus; - } - } - smmu_pci_bus = NULL; + if (smmu_pci_bus) { + return smmu_pci_bus; } - return smmu_pci_bus; + + g_hash_table_iter_init(&iter, s->smmu_pcibus_by_busptr); + while (g_hash_table_iter_next(&iter, NULL, (void **)&smmu_pci_bus)) { + if (pci_bus_num(smmu_pci_bus->bus) == bus_num) { + s->smmu_pcibus_by_bus_num[bus_num] = smmu_pci_bus; + return smmu_pci_bus; + } + } + + return NULL; } static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As the Connex and Verdex machines only boot in little-endian, we can simplify the code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - int be; MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, be)) { + sector_len, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - int be; MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, be)) { + sector_len, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, DeviceState *mst_irq; DriveInfo *dinfo; int i; - int be; MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, memory_region_set_readonly(rom, true); memory_region_add_subregion(address_space_mem, 0, rom); -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, i ? "mainstone.flash1" : "mainstone.flash0", MAINSTONE_FLASH, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, be)) { + sector_len, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) DriveInfo *dinfo; int fl_idx; uint32_t flash_size = flash0_size; - int be; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) OMAP_CS2_BASE, &cs[3]); fl_idx = 0; -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif - if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, be)) { + sector_size, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS1_BASE, "omap_sx1.flash1-1", flash1_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, be)) { + sector_size, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; - int be; void *z2_lcd; I2CBus *bus; DeviceState *wm; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) /* Setup CPU & memory */ mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, be)) { + sector_len, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) * 0xFF800000 (if there is 8 MB flash). So remap flash access if the * image is smaller than 32 MB. */ -#ifdef TARGET_WORDS_BIGENDIAN - pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, - "musicpal.flash", flash_size, - blk, 0x10000, - MP_FLASH_SIZE_MAX / flash_size, - 2, 0x00BF, 0x236D, 0x0000, 0x0000, - 0x5555, 0x2AAA, 1); -#else pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, blk, 0x10000, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -#endif - } sysbus_create_simple(TYPE_MV88W8618_FLASHCFG, MP_FLASHCFG_BASE, NULL); -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-3-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_init(Object *obj) s->last_rtcpicr = 0; s->last_hz = s->last_sw = s->last_pi = qemu_clock_get_ms(rtc_clock); + sysbus_init_irq(dev, &s->rtc_irq); + + memory_region_init_io(&s->iomem, obj, &pxa2xx_rtc_ops, s, + "pxa2xx-rtc", 0x10000); + sysbus_init_mmio(dev, &s->iomem); +} + +static void pxa2xx_rtc_realize(DeviceState *dev, Error **errp) +{ + PXA2xxRTCState *s = PXA2XX_RTC(dev); s->rtc_hz = timer_new_ms(rtc_clock, pxa2xx_rtc_hz_tick, s); s->rtc_rdal1 = timer_new_ms(rtc_clock, pxa2xx_rtc_rdal1_tick, s); s->rtc_rdal2 = timer_new_ms(rtc_clock, pxa2xx_rtc_rdal2_tick, s); s->rtc_swal1 = timer_new_ms(rtc_clock, pxa2xx_rtc_swal1_tick, s); s->rtc_swal2 = timer_new_ms(rtc_clock, pxa2xx_rtc_swal2_tick, s); s->rtc_pi = timer_new_ms(rtc_clock, pxa2xx_rtc_pi_tick, s); - - sysbus_init_irq(dev, &s->rtc_irq); - - memory_region_init_io(&s->iomem, obj, &pxa2xx_rtc_ops, s, - "pxa2xx-rtc", 0x10000); - sysbus_init_mmio(dev, &s->iomem); } static int pxa2xx_rtc_pre_save(void *opaque) @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_sysbus_class_init(ObjectClass *klass, void *data) dc->desc = "PXA2xx RTC Controller"; dc->vmsd = &vmstate_pxa2xx_rtc_regs; + dc->realize = pxa2xx_rtc_realize; } static const TypeInfo pxa2xx_rtc_sysbus_info = { -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-4-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/spitz.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_init(Object *obj) spitz_keyboard_pre_map(s); - s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); } +static void spitz_keyboard_realize(DeviceState *dev, Error **errp) +{ + SpitzKeyboardState *s = SPITZ_KEYBOARD(dev); + s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); +} + /* LCD backlight controller */ #define LCDTG_RESCTL 0x00 @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_spitz_kbd; + dc->realize = spitz_keyboard_realize; } static const TypeInfo spitz_keyboard_info = { -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-5-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/strongarm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_init(Object *obj) s->last_rcnr = (uint32_t) mktimegm(&tm); s->last_hz = qemu_clock_get_ms(rtc_clock); - s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); - s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); - sysbus_init_irq(dev, &s->rtc_irq); sysbus_init_irq(dev, &s->rtc_hz_irq); @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void strongarm_rtc_realize(DeviceState *dev, Error **errp) +{ + StrongARMRTCState *s = STRONGARM_RTC(dev); + s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); + s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); +} + static int strongarm_rtc_pre_save(void *opaque) { StrongARMRTCState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data) dc->desc = "StrongARM RTC Controller"; dc->vmsd = &vmstate_strongarm_rtc_regs; + dc->realize = strongarm_rtc_realize; } static const TypeInfo strongarm_rtc_sysbus_info = { @@ -XXX,XX +XXX,XX @@ static void strongarm_uart_init(Object *obj) "uart", 0x10000); sysbus_init_mmio(dev, &s->iomem); sysbus_init_irq(dev, &s->irq); - - s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_rx_to, s); - s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); } static void strongarm_uart_realize(DeviceState *dev, Error **errp) { StrongARMUARTState *s = STRONGARM_UART(dev); + s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + strongarm_uart_rx_to, + s); + s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); qemu_chr_fe_set_handlers(&s->chr, strongarm_uart_can_receive, strongarm_uart_receive, -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200227025055.14341-7-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/cadence_ttc.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/timer/cadence_ttc.c b/hw/timer/cadence_ttc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cadence_ttc.c +++ b/hw/timer/cadence_ttc.c @@ -XXX,XX +XXX,XX @@ static void cadence_timer_init(uint32_t freq, CadenceTimerState *s) static void cadence_ttc_init(Object *obj) { CadenceTTCState *s = CADENCE_TTC(obj); - int i; - - for (i = 0; i < 3; ++i) { - cadence_timer_init(133000000, &s->timer[i]); - sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->timer[i].irq); - } memory_region_init_io(&s->iomem, obj, &cadence_ttc_ops, s, "timer", 0x1000); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void cadence_ttc_realize(DeviceState *dev, Error **errp) +{ + CadenceTTCState *s = CADENCE_TTC(dev); + int i; + + for (i = 0; i < 3; ++i) { + cadence_timer_init(133000000, &s->timer[i]); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->timer[i].irq); + } +} + static int cadence_timer_pre_save(void *opaque) { cadence_timer_sync((CadenceTimerState *)opaque); @@ -XXX,XX +XXX,XX @@ static void cadence_ttc_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_cadence_ttc; + dc->realize = cadence_ttc_realize; } static const TypeInfo cadence_ttc_info = { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Don't merely start with v8.0, handle v7VE as well. Ensure that writes from aarch32 mode do not change bits in the other half of the register. Protect reads of aa64 id registers with ARM_FEATURE_AARCH64. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 38 +++++++++++++++++++++++++------------- 1 file changed, 25 insertions(+), 13 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { REGINFO_SENTINEL }; -static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) +static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) { ARMCPU *cpu = env_archcpu(env); - /* Begin with bits defined in base ARMv8.0. */ - uint64_t valid_mask = MAKE_64BIT_MASK(0, 34); + + if (arm_feature(env, ARM_FEATURE_V8)) { + valid_mask |= MAKE_64BIT_MASK(0, 34); /* ARMv8.0 */ + } else { + valid_mask |= MAKE_64BIT_MASK(0, 28); /* ARMv7VE */ + } if (arm_feature(env, ARM_FEATURE_EL3)) { valid_mask &= ~HCR_HCD; @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) */ valid_mask &= ~HCR_TSC; } - if (cpu_isar_feature(aa64_vh, cpu)) { - valid_mask |= HCR_E2H; - } - if (cpu_isar_feature(aa64_lor, cpu)) { - valid_mask |= HCR_TLOR; - } - if (cpu_isar_feature(aa64_pauth, cpu)) { - valid_mask |= HCR_API | HCR_APK; + + if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (cpu_isar_feature(aa64_vh, cpu)) { + valid_mask |= HCR_E2H; + } + if (cpu_isar_feature(aa64_lor, cpu)) { + valid_mask |= HCR_TLOR; + } + if (cpu_isar_feature(aa64_pauth, cpu)) { + valid_mask |= HCR_API | HCR_APK; + } } /* Clear RES0 bits. */ @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) arm_cpu_update_vfiq(cpu); } +static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) +{ + do_hcr_write(env, value, 0); +} + static void hcr_writehigh(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { /* Handle HCR2 write, i.e. write to high half of HCR_EL2 */ value = deposit64(env->cp15.hcr_el2, 32, 32, value); - hcr_write(env, NULL, value); + do_hcr_write(env, value, MAKE_64BIT_MASK(0, 32)); } static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, { /* Handle HCR write, i.e. write to low half of HCR_EL2 */ value = deposit64(env->cp15.hcr_el2, 0, 32, value); - hcr_write(env, NULL, value); + do_hcr_write(env, value, MAKE_64BIT_MASK(32, 32)); } /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_TERR (1ULL << 36) #define HCR_TEA (1ULL << 37) #define HCR_MIOCNCE (1ULL << 38) +/* RES0 bit 39 */ #define HCR_APK (1ULL << 40) #define HCR_API (1ULL << 41) #define HCR_NV (1ULL << 42) @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_NV2 (1ULL << 45) #define HCR_FWB (1ULL << 46) #define HCR_FIEN (1ULL << 47) +/* RES0 bit 48 */ #define HCR_TID4 (1ULL << 49) #define HCR_TICAB (1ULL << 50) +#define HCR_AMVOFFEN (1ULL << 51) #define HCR_TOCU (1ULL << 52) +#define HCR_ENSCXT (1ULL << 53) #define HCR_TTLBIS (1ULL << 54) #define HCR_TTLBOS (1ULL << 55) #define HCR_ATA (1ULL << 56) #define HCR_DCT (1ULL << 57) +#define HCR_TID5 (1ULL << 58) +#define HCR_TWEDEN (1ULL << 59) +#define HCR_TWEDEL MAKE_64BIT_MASK(60, 4) #define SCR_NS (1U << 0) #define SCR_IRQ (1U << 1) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In arm_cpu_reset, we configure many system registers so that user-only behaves as it should with a minimum of ifdefs. However, we do not set all of the system registers as required for a cpu with EL2 and EL3. Disabling EL2 and EL3 mean that we will not look at those registers, which means that we don't have to worry about configuring them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_reset_hivecs_property = static Property arm_cpu_rvbar_property = DEFINE_PROP_UINT64("rvbar", ARMCPU, rvbar, 0); +#ifndef CONFIG_USER_ONLY static Property arm_cpu_has_el2_property = DEFINE_PROP_BOOL("has_el2", ARMCPU, has_el2, true); static Property arm_cpu_has_el3_property = DEFINE_PROP_BOOL("has_el3", ARMCPU, has_el3, true); +#endif static Property arm_cpu_cfgend_property = DEFINE_PROP_BOOL("cfgend", ARMCPU, cfgend, false); @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) qdev_property_add_static(DEVICE(obj), &arm_cpu_rvbar_property); } +#ifndef CONFIG_USER_ONLY if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { /* Add the has_el3 state CPU property only if EL3 is allowed. This will * prevent "has_el3" from existing on CPUs which cannot support EL3. */ qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el3_property); -#ifndef CONFIG_USER_ONLY object_property_add_link(obj, "secure-memory", TYPE_MEMORY_REGION, (Object **)&cpu->secure_memory, qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_STRONG, &error_abort); -#endif } if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el2_property); } +#endif if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) { cpu->has_pmu = true; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We have disabled EL2 and EL3 for user-only, which means that these registers "don't exist" and should not be set. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Enable all PAC keys. */ env->cp15.sctlr_el[1] |= (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB); - /* Enable all PAC instructions */ - env->cp15.hcr_el2 |= HCR_API; - env->cp15.scr_el3 |= SCR_API; /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3); /* and to the SVE instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); - env->cp15.cptr_el[3] |= CPTR_EZ; /* with maximum vector length */ env->vfp.zcr_el[1] = cpu_isar_feature(aa64_sve, cpu) ? cpu->sve_max_vq - 1 : 0; - env->vfp.zcr_el[2] = env->vfp.zcr_el[1]; - env->vfp.zcr_el[3] = env->vfp.zcr_el[1]; /* * Enable TBI0 and TBI1. While the real kernel only enables TBI0, * turning on both here will produce smaller code and otherwise -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Update the {TGE,E2H} == '11' masking to ARMv8.6. If EL2 is configured for aarch32, disable all of the bits that are RES0 in aarch32 mode. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint64_t arm_hcr_el2_eff(CPUARMState *env) * Since the v8.4 language applies to the entire register, and * appears to be backward compatible, use that. */ - ret = 0; - } else if (ret & HCR_TGE) { - /* These bits are up-to-date as of ARMv8.4. */ + return 0; + } + + /* + * For a cpu that supports both aarch64 and aarch32, we can set bits + * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32. + * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32. + */ + if (!arm_el_is_aa64(env, 2)) { + uint64_t aa32_valid; + + /* + * These bits are up-to-date as of ARMv8.6. + * For HCR, it's easiest to list just the 2 bits that are invalid. + * For HCR2, list those that are valid. + */ + aa32_valid = MAKE_64BIT_MASK(0, 32) & ~(HCR_RW | HCR_TDZ); + aa32_valid |= (HCR_CD | HCR_ID | HCR_TERR | HCR_TEA | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_TTLBIS); + ret &= aa32_valid; + } + + if (ret & HCR_TGE) { + /* These bits are up-to-date as of ARMv8.6. */ if (ret & HCR_E2H) { ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO | HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE | HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU | - HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE); + HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_ENSCXT | + HCR_TTLBIS | HCR_TTLBOS | HCR_TID5); } else { ret |= HCR_FMO | HCR_IMO | HCR_AMO; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits trap EL1 access to various virtual memory controls. Buglink: https://bugs.launchpad.net/bugs/1855072 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 82 ++++++++++++++++++++++++++++++--------------- 1 file changed, 55 insertions(+), 27 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ +static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1) { + uint64_t trap = isread ? HCR_TRVM : HCR_TVM; + if (arm_hcr_el2_eff(env) & trap) { + return CP_ACCESS_TRAP_EL2; + } + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { */ { .name = "CONTEXTIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL1_RW, .secure = ARM_CP_SECSTATE_NS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .secure = ARM_CP_SECSTATE_NS, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, { .name = "CONTEXTIDR_S", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .secure = ARM_CP_SECSTATE_S, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_s), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, REGINFO_SENTINEL @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = CP_ANY, .crn = 3, .crm = CP_ANY, .opc2 = CP_ANY, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5, .access = PL0_W, .type = ARM_CP_NOP }, { .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), offsetof(CPUARMState, cp15.ifar_ns) }, .resetvalue = 0, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { */ { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* MAIR can just read-as-written because we don't implement caches * and so don't need to care about memory attributes. */ { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), + .access = PL1_RW, .accessfn = access_tvm_trvm, + .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), .resetvalue = 0 }, { .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { * handled in the field definitions. */ { .name = "MAIR0", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, .access = PL1_RW, + .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s), offsetof(CPUARMState, cp15.mair0_ns) }, .resetfn = arm_cp_reset_ignore }, { .name = "MAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, .access = PL1_RW, + .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s), offsetof(CPUARMState, cp15.mair1_ns) }, .resetfn = arm_cp_reset_ignore }, @@ -XXX,XX +XXX,XX @@ static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_ALIAS, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s), offsetoflow32(CPUARMState, cp15.dfsr_ns) }, }, { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s), offsetoflow32(CPUARMState, cp15.ifsr_ns) } }, { .name = "DFAR", .cp = 15, .opc1 = 0, .crn = 6, .crm = 0, .opc2 = 0, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.dfar_s), offsetof(CPUARMState, cp15.dfar_ns) } }, { .name = "FAR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), + .access = PL1_RW, .accessfn = access_tvm_trvm, + .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), .resetvalue = 0, }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { static const ARMCPRegInfo vmsa_cp_reginfo[] = { { .name = "ESR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, }, { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0, - .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) } }, { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1, - .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) } }, { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, .writefn = vmsa_tcr_el12_write, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_tcr_el12_write, .resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) }, { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, .raw_writefn = vmsa_ttbcr_raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]), offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { */ static const ARMCPRegInfo ttbcr2_reginfo = { .name = "TTBCR2", .cp = 15, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_ALIAS, .bank_fieldoffsets = { offsetofhigh32(CPUARMState, cp15.tcr_el[3]), offsetofhigh32(CPUARMState, cp15.tcr_el[1]) }, }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lpae_cp_reginfo[] = { /* NOP AMAIR0/1 */ { .name = "AMAIR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* AMAIR1 is mapped to AMAIR_EL1[63:32] */ { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0, .access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s), offsetof(CPUARMState, cp15.par_ns)} }, { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0, - .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_64BIT | ARM_CP_ALIAS, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) }, .writefn = vmsa_ttbr_write, }, { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1, - .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_64BIT | ARM_CP_ALIAS, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) }, .writefn = vmsa_ttbr_write, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .type = ARM_CP_NOP, .access = PL1_W }, /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo sctlr = { .name = "SCTLR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), offsetof(CPUARMState, cp15.sctlr_ns) }, .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits trap EL1 access to set/way cache maintenance insns. Buglink: https://bugs.launchpad.net/bugs/1863685 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TSW. */ +static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TSW)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_W, .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, .accessfn = aa64_cacheop_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to the auxiliary control registers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TACR. */ +static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TACR)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ats1cp_reginfo[] = { static const ARMCPRegInfo actlr2_hactlr2_reginfo[] = { { .name = "ACTLR2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tacr, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "HACTLR2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 3, .access = PL2_RW, .type = ARM_CP_CONST, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo auxcr_reginfo[] = { { .name = "ACTLR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = cpu->reset_auxcr }, + .access = PL1_RW, .accessfn = access_tacr, + .type = ARM_CP_CONST, .resetvalue = cpu->reset_auxcr }, { .name = "ACTLR_EL2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 1, .access = PL2_RW, .type = ARM_CP_CONST, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to cache maintenance insns that operate to the point of coherency or persistence. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 39 +++++++++++++++++++++++++++++++-------- 1 file changed, 31 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_access(CPUARMState *env, return CP_ACCESS_OK; } +static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* Cache invalidate/clean to Point of Coherency or Persistence... */ + switch (arm_current_el(env)) { + case 0: + /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { + return CP_ACCESS_TRAP; + } + /* fall through */ + case 1: + /* ... EL1 must trap to EL2 if HCR_EL2.TPCP is set. */ + if (arm_hcr_el2_eff(env) & HCR_TPCP) { + return CP_ACCESS_TRAP_EL2; + } + break; + } + return CP_ACCESS_OK; +} + /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_access }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = aa64_cacheop_poc_access, + .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, /* MMU Domain access control / MPU write buffer control */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpop_reg[] = { { .name = "DC_CVAP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, - .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpodp_reg[] = { { .name = "DC_CVADP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, - .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, REGINFO_SENTINEL }; #endif /*CONFIG_USER_ONLY*/ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to cache maintenance insns that operate to the point of unification. There are no longer any references to plain aa64_cacheop_access, so remove it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 53 +++++++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo uao_reginfo = { .readfn = aa64_uao_read, .writefn = aa64_uao_write }; -static CPAccessResult aa64_cacheop_access(CPUARMState *env, - const ARMCPRegInfo *ri, - bool isread) -{ - /* Cache invalidate/clean: NOP, but EL0 must UNDEF unless - * SCTLR_EL1.UCI is set. - */ - if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UCI)) { - return CP_ACCESS_TRAP; - } - return CP_ACCESS_OK; -} - static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, return CP_ACCESS_OK; } +static CPAccessResult aa64_cacheop_pou_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* Cache invalidate/clean to Point of Unification... */ + switch (arm_current_el(env)) { + case 0: + /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { + return CP_ACCESS_TRAP; + } + /* fall through */ + case 1: + /* ... EL1 must trap to EL2 if HCR_EL2.TPU is set. */ + if (arm_hcr_el2_eff(env) & HCR_TPU) { + return CP_ACCESS_TRAP_EL2; + } + break; + } + return CP_ACCESS_OK; +} + /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { /* Cache ops: all NOPs since we don't emulate caches */ { .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .type = ARM_CP_NOP, + .accessfn = aa64_cacheop_pou_access }, { .name = "IC_IALLU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .type = ARM_CP_NOP, + .accessfn = aa64_cacheop_pou_access }, { .name = "IC_IVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_pou_access }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .access = PL1_W, .accessfn = aa64_cacheop_poc_access, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_pou_access }, { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .writefn = tlbiipas2_is_write }, /* 32 bit cache operations */ { .name = "ICIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "BPIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "ICIALLU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "ICIMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "BPIALL", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to tlb maintenance insns. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 85 +++++++++++++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 30 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TTLB. */ +static CPAccessResult access_ttlb(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TTLB)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .type = ARM_CP_NO_RAW, .access = PL1_R, .readfn = isr_read }, /* 32 bit ITLB invalidates */ { .name = "ITLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "ITLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "ITLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, /* 32 bit DTLB invalidates */ { .name = "DTLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "DTLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "DTLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, /* 32 bit TLB invalidates */ { .name = "TLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "TLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "TLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, { .name = "TLBIMVAA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimvaa_write }, REGINFO_SENTINEL }; static const ARMCPRegInfo v7mp_cp_reginfo[] = { /* 32 bit TLB invalidates, Inner Shareable */ { .name = "TLBIALLIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_is_write }, { .name = "TLBIMVAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_is_write }, { .name = "TLBIASIDIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbiasid_is_write }, { .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { #endif /* TLB invalidate last level of translation table walk */ { .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_is_write }, { .name = "TLBIMVAALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, { .name = "TLBIMVAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "TLBIMVAAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimvaa_write }, { .name = "TLBIMVALH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, .type = ARM_CP_NO_RAW, .access = PL2_W, .writefn = tlbimva_hyp_write }, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Make the output just a bit prettier when running by hand. Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pauth-1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/tcg/aarch64/pauth-1.c b/tests/tcg/aarch64/pauth-1.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/pauth-1.c +++ b/tests/tcg/aarch64/pauth-1.c @@ -XXX,XX +XXX,XX @@ int main() } perc = (float) count / (float) (TESTS * 2); - printf("Ptr Check: %0.2f%%", perc * 100.0); + printf("Ptr Check: %0.2f%%\n", perc * 100.0); assert(perc > 0.95); return 0; } -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard is a singleboard computer with an Allwinner A10 System-on-Chip [1]. As documented in the Allwinner A10 User Manual V1.5 [2], the SoC has an ARM Cortex-A8 processor. Currently the Cubieboard machine definition specifies the ARM Cortex-A9 in its description and as the default CPU. This patch corrects the Cubieboard machine definition to use the ARM Cortex-A8. The only user-visible effect is that our textual description of the machine was wrong, because hw/arm/allwinner-a10.c always creates a Cortex-A8 CPU regardless of the default value in the MachineClass struct. [1] http://docs.cubieboard.org/products/start#cubieboard1 [2] https://linux-sunxi.org/File:Allwinner_A10_User_manual_V1.5.pdf Fixes: 8a863c8120994981a099 Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-2-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [note in commit message that the bug didn't have much visible effect] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) static void cubieboard_machine_init(MachineClass *mc) { - mc->desc = "cubietech cubieboard (Cortex-A9)"; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); + mc->desc = "cubietech cubieboard (Cortex-A8)"; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); mc->init = cubieboard_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard has an ARM Cortex-A8. Instead of simply ignoring a bogus -cpu option provided by the user, give them an error message so they know their command line is wrong. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-3-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info cubieboard_binfo = { static void cubieboard_init(MachineState *machine) { - AwA10State *a10 = AW_A10(object_new(TYPE_AW_A10)); + AwA10State *a10; Error *err = NULL; + /* Only allow Cortex-A8 for this board */ + if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a8")) != 0) { + error_report("This board can only be used with cortex-a8 CPU"); + exit(1); + } + + a10 = AW_A10(object_new(TYPE_AW_A10)); + object_property_set_int(OBJECT(&a10->emac), 1, "phy-addr", &err); if (err != NULL) { error_reportf_err(err, "Couldn't set phy address: "); -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard contains either 512MiB or 1GiB of onboard RAM [1]. Prevent changing RAM to a different size which could break user programs. [1] http://linux-sunxi.org/Cubieboard Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-4-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) AwA10State *a10; Error *err = NULL; + /* This board has fixed size RAM (512MiB or 1GiB) */ + if (machine->ram_size != 512 * MiB && + machine->ram_size != 1 * GiB) { + error_report("This machine can only be used with 512MiB or 1GiB RAM"); + exit(1); + } + /* Only allow Cortex-A8 for this board */ if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a8")) != 0) { error_report("This board can only be used with cortex-a8 CPU"); @@ -XXX,XX +XXX,XX @@ static void cubieboard_machine_init(MachineClass *mc) { mc->desc = "cubietech cubieboard (Cortex-A8)"; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); + mc->default_ram_size = 1 * GiB; mc->init = cubieboard_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard machine does not support the -bios argument. Report an error when -bios is used and exit immediately. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-5-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "qapi/error.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/sysbus.h" #include "hw/boards.h" #include "hw/arm/allwinner-a10.h" @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) AwA10State *a10; Error *err = NULL; + /* BIOS is not supported by this board */ + if (bios_name) { + error_report("BIOS not supported for this machine"); + exit(1); + } + /* This board has fixed size RAM (512MiB or 1GiB) */ if (machine->ram_size != 512 * MiB && machine->ram_size != 1 * GiB) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Replicate the single TBI bit from TCR_EL2 and TCR_EL3 so that we can unconditionally use pointer bit 55 to index into our composite TBI1:TBI0 field. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx) } else if (mmu_idx == ARMMMUIdx_Stage2) { return 0; /* VTCR_EL2 */ } else { - return extract32(tcr, 20, 1); + /* Replicate the single TBI bit so we always have 2 bits. */ + return extract32(tcr, 20, 1) * 3; } } @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx) } else if (mmu_idx == ARMMMUIdx_Stage2) { return 0; /* VTCR_EL2 */ } else { - return extract32(tcr, 29, 1); + /* Replicate the single TBID bit so we always have 2 bits. */ + return extract32(tcr, 29, 1) * 3; } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We now cache the core mmu_idx in env->hflags. Rather than recompute from scratch, extract the field. All of the uses of cpu_mmu_index within target/arm are within helpers, and env->hflags is always stable within a translation block from whence helpers are called. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 23 +++++++++++++---------- target/arm/helper.c | 5 ----- 2 files changed, 13 insertions(+), 15 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { #define MMU_USER_IDX 0 -/** - * cpu_mmu_index: - * @env: The cpu environment - * @ifetch: True for code access, false for data access. - * - * Return the core mmu index for the current translation regime. - * This function is used by generic TCG code paths. - */ -int cpu_mmu_index(CPUARMState *env, bool ifetch); - /* Indexes used when registering address spaces with cpu_address_space_init */ typedef enum ARMASIdx { ARMASIdx_NS = 0, @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */ FIELD(TBFLAG_A64, TBID, 12, 2) FIELD(TBFLAG_A64, UNPRIV, 14, 1) +/** + * cpu_mmu_index: + * @env: The cpu environment + * @ifetch: True for code access, false for data access. + * + * Return the core mmu index for the current translation regime. + * This function is used by generic TCG code paths. + */ +static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) +{ + return FIELD_EX32(env->hflags, TBFLAG_ANY, MMUIDX); +} + static inline bool bswap_code(bool sctlr_b) { #ifdef CONFIG_USER_ONLY diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_mmu_idx(CPUARMState *env) return arm_mmu_idx_el(env, arm_current_el(env)); } -int cpu_mmu_index(CPUARMState *env, bool ifetch) -{ - return arm_to_core_mmu_idx(arm_mmu_idx(env)); -} - #ifndef CONFIG_USER_ONLY ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> If by context we know that we're in AArch64 mode, we need not test for M-profile when reconstructing the full ARMMMUIdx. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/translate-a64.c | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) } } +static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) +{ + /* AArch64 is always a-profile. */ + return mmu_idx | ARM_MMU_IDX_A; +} + int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->condexec_mask = 0; dc->condexec_cond = 0; core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX); - dc->mmu_idx = core_to_arm_mmu_idx(env, core_mmu_idx); + dc->mmu_idx = core_to_aa64_mmu_idx(core_mmu_idx); dc->tbii = FIELD_EX32(tb_flags, TBFLAG_A64, TBII); dc->tbid = FIELD_EX32(tb_flags, TBFLAG_A64, TBID); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We missed this case within AArch64.ExceptionReturn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) "AArch32 EL%d PC 0x%" PRIx32 "\n", cur_el, new_el, env->regs[15]); } else { + int tbii; + env->aarch64 = 1; spsr &= aarch64_pstate_valid_mask(&env_archcpu(env)->isar); pstate_write(env, spsr); @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) env->pstate &= ~PSTATE_SS; } aarch64_restore_sp(env, new_el); - env->pc = new_pc; helper_rebuild_hflags_a64(env, new_el); + + /* + * Apply TBI to the exception return address. We had to delay this + * until after we selected the new EL, so that we could select the + * correct TBI+TBID bits. This is made easier by waiting until after + * the hflags rebuild, since we can pull the composite TBII field + * from there. + */ + tbii = FIELD_EX32(env->hflags, TBFLAG_A64, TBII); + if ((tbii >> extract64(new_pc, 55, 1)) & 1) { + /* TBI is enabled. */ + int core_mmu_idx = cpu_mmu_index(env, false); + if (regime_has_2_ranges(core_to_aa64_mmu_idx(core_mmu_idx))) { + new_pc = sextract64(new_pc, 0, 56); + } else { + new_pc = extract64(new_pc, 0, 56); + } + } + env->pc = new_pc; + qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch64 EL%d PC 0x%" PRIx64 "\n", cur_el, new_el, env->pc); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is an aarch64-only function. Move it out of the shared file. This patch is code movement only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 1 + target/arm/helper.h | 1 - target/arm/helper-a64.c | 91 ++++++++++++++++++++++++++++++++++++++++ target/arm/op_helper.c | 93 ----------------------------------------- 4 files changed, 92 insertions(+), 94 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) DEF_HELPER_2(exception_return, void, env, i64) +DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) -DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "cpu.h" #include "exec/gdbstub.h" #include "exec/helper-proto.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sqrt_f16)(uint32_t a, void *fpstp) return float16_sqrt(a, s); } +void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) +{ + /* + * Implement DC ZVA, which zeroes a fixed-length block of memory. + * Note that we do not implement the (architecturally mandated) + * alignment fault for attempts to use this on Device memory + * (which matches the usual QEMU behaviour of not implementing either + * alignment faults or any memory attribute handling). + */ + ARMCPU *cpu = env_archcpu(env); + uint64_t blocklen = 4 << cpu->dcz_blocksize; + uint64_t vaddr = vaddr_in & ~(blocklen - 1); + +#ifndef CONFIG_USER_ONLY + { + /* + * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than + * the block size so we might have to do more than one TLB lookup. + * We know that in fact for any v8 CPU the page size is at least 4K + * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only + * 1K as an artefact of legacy v5 subpage support being present in the + * same QEMU executable. So in practice the hostaddr[] array has + * two entries, given the current setting of TARGET_PAGE_BITS_MIN. + */ + int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); + void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; + int try, i; + unsigned mmu_idx = cpu_mmu_index(env, false); + TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); + + assert(maxidx <= ARRAY_SIZE(hostaddr)); + + for (try = 0; try < 2; try++) { + + for (i = 0; i < maxidx; i++) { + hostaddr[i] = tlb_vaddr_to_host(env, + vaddr + TARGET_PAGE_SIZE * i, + 1, mmu_idx); + if (!hostaddr[i]) { + break; + } + } + if (i == maxidx) { + /* + * If it's all in the TLB it's fair game for just writing to; + * we know we don't need to update dirty status, etc. + */ + for (i = 0; i < maxidx - 1; i++) { + memset(hostaddr[i], 0, TARGET_PAGE_SIZE); + } + memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); + return; + } + /* + * OK, try a store and see if we can populate the tlb. This + * might cause an exception if the memory isn't writable, + * in which case we will longjmp out of here. We must for + * this purpose use the actual register value passed to us + * so that we get the fault address right. + */ + helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); + /* Now we can populate the other TLB entries, if any */ + for (i = 0; i < maxidx; i++) { + uint64_t va = vaddr + TARGET_PAGE_SIZE * i; + if (va != (vaddr_in & TARGET_PAGE_MASK)) { + helper_ret_stb_mmu(env, va, 0, oi, GETPC()); + } + } + } + + /* + * Slow path (probably attempt to do this to an I/O device or + * similar, or clearing of a block of code we have translations + * cached for). Just do a series of byte writes as the architecture + * demands. It's not worth trying to use a cpu_physical_memory_map(), + * memset(), unmap() sequence here because: + * + we'd need to account for the blocksize being larger than a page + * + the direct-RAM access case is almost always going to be dealt + * with in the fastpath code above, so there's no speed benefit + * + we would have to deal with the map returning NULL because the + * bounce buffer was in use + */ + for (i = 0; i < blocklen; i++) { + helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); + } + } +#else + memset(g2h(vaddr), 0, blocklen); +#endif +} diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ * License along with this library; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" -#include "qemu/units.h" #include "qemu/log.h" #include "qemu/main-loop.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(ror_cc)(CPUARMState *env, uint32_t x, uint32_t i) return ((uint32_t)x >> shift) | (x << (32 - shift)); } } - -void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) -{ - /* - * Implement DC ZVA, which zeroes a fixed-length block of memory. - * Note that we do not implement the (architecturally mandated) - * alignment fault for attempts to use this on Device memory - * (which matches the usual QEMU behaviour of not implementing either - * alignment faults or any memory attribute handling). - */ - - ARMCPU *cpu = env_archcpu(env); - uint64_t blocklen = 4 << cpu->dcz_blocksize; - uint64_t vaddr = vaddr_in & ~(blocklen - 1); - -#ifndef CONFIG_USER_ONLY - { - /* - * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than - * the block size so we might have to do more than one TLB lookup. - * We know that in fact for any v8 CPU the page size is at least 4K - * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only - * 1K as an artefact of legacy v5 subpage support being present in the - * same QEMU executable. So in practice the hostaddr[] array has - * two entries, given the current setting of TARGET_PAGE_BITS_MIN. - */ - int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); - void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; - int try, i; - unsigned mmu_idx = cpu_mmu_index(env, false); - TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); - - assert(maxidx <= ARRAY_SIZE(hostaddr)); - - for (try = 0; try < 2; try++) { - - for (i = 0; i < maxidx; i++) { - hostaddr[i] = tlb_vaddr_to_host(env, - vaddr + TARGET_PAGE_SIZE * i, - 1, mmu_idx); - if (!hostaddr[i]) { - break; - } - } - if (i == maxidx) { - /* - * If it's all in the TLB it's fair game for just writing to; - * we know we don't need to update dirty status, etc. - */ - for (i = 0; i < maxidx - 1; i++) { - memset(hostaddr[i], 0, TARGET_PAGE_SIZE); - } - memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); - return; - } - /* - * OK, try a store and see if we can populate the tlb. This - * might cause an exception if the memory isn't writable, - * in which case we will longjmp out of here. We must for - * this purpose use the actual register value passed to us - * so that we get the fault address right. - */ - helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); - /* Now we can populate the other TLB entries, if any */ - for (i = 0; i < maxidx; i++) { - uint64_t va = vaddr + TARGET_PAGE_SIZE * i; - if (va != (vaddr_in & TARGET_PAGE_MASK)) { - helper_ret_stb_mmu(env, va, 0, oi, GETPC()); - } - } - } - - /* - * Slow path (probably attempt to do this to an I/O device or - * similar, or clearing of a block of code we have translations - * cached for). Just do a series of byte writes as the architecture - * demands. It's not worth trying to use a cpu_physical_memory_map(), - * memset(), unmap() sequence here because: - * + we'd need to account for the blocksize being larger than a page - * + the direct-RAM access case is almost always going to be dealt - * with in the fastpath code above, so there's no speed benefit - * + we would have to deal with the map returning NULL because the - * bounce buffer was in use - */ - for (i = 0; i < blocklen; i++) { - helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); - } - } -#else - memset(g2h(vaddr), 0, blocklen); -#endif -} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The function does not write registers, and only reads them by implication via the exception path. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) DEF_HELPER_2(exception_return, void, env, i64) -DEF_HELPER_2(dc_zva, void, env, i64) +DEF_HELPER_FLAGS_2(dc_zva, TCG_CALL_NO_WG, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This data access was forgotten when we added support for cleaning addresses of TBI information. Fixes: 3a471103ac1823ba Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200302175829.2183-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, return; case ARM_CP_DC_ZVA: /* Writes clear the aligned block of memory which rt points into. */ - tcg_rt = cpu_reg(s, rt); + tcg_rt = clean_data_tbi(s, cpu_reg(s, rt)); gen_helper_dc_zva(cpu_env, tcg_rt); return; default: -- 2.20.1 The following changes since commit 003ba52a8b327180e284630b289c6ece5a3e08b9: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-02-16 11:16:39 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230216 for you to fetch changes up to caf01d6a435d9f4a95aeae2f9fc6cb8b889b1fb8: tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG (2023-02-16 16:28:53 +0000) ---------------------------------------------------------------- target-arm queue: * Some mostly M-profile-related code cleanups * avocado: Retire the boot_linux.py AArch64 TCG tests * hw/arm/smmuv3: Add GBPA register * arm/virt: don't try to spell out the accelerator * hw/arm: Attach PSPI module to NPCM7XX SoC * Some cleanup/refactoring patches aiming towards allowing building Arm targets without CONFIG_TCG ---------------------------------------------------------------- Alex Bennée (1): tests/avocado: retire the Aarch64 TCG tests from boot_linux.py Claudio Fontana (3): target/arm: rename handle_semihosting to tcg_handle_semihosting target/arm: wrap psci call with tcg_enabled target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Cornelia Huck (1): arm/virt: don't try to spell out the accelerator Fabiano Rosas (7): target/arm: Move PC alignment check target/arm: Move cpregs code out of cpu.h tests/avocado: Skip tests that require a missing accelerator tests/avocado: Tag TCG tests with accel:tcg target/arm: Use "max" as default cpu for the virt machine with KVM tests/qtest: arm-cpu-features: Match tests to required accelerators tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Hao Wu (3): MAINTAINERS: Add myself to maintainers and remove Havard hw/ssi: Add Nuvoton PSPI Module hw/arm: Attach PSPI module to NPCM7XX SoC Jean-Philippe Brucker (2): hw/arm/smmu-common: Support 64-bit addresses hw/arm/smmu-common: Fix TTB1 handling Mostafa Saleh (1): hw/arm/smmuv3: Add GBPA register Philippe Mathieu-Daudé (12): hw/intc/armv7m_nvic: Use OBJECT_DECLARE_SIMPLE_TYPE() macro target/arm: Simplify arm_v7m_mmu_idx_for_secstate() for user emulation target/arm: Reduce arm_v7m_mmu_idx_[all/for_secstate_and_priv]() scope target/arm: Constify ID_PFR1 on user emulation target/arm: Convert CPUARMState::eabi to boolean target/arm: Avoid resetting CPUARMState::eabi field target/arm: Restrict CPUARMState::gicv3state to sysemu target/arm: Restrict CPUARMState::arm_boot_info to sysemu target/arm: Restrict CPUARMState::nvic to sysemu target/arm: Store CPUARMState::nvic as NVICState* target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h' hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependency MAINTAINERS | 8 +- docs/system/arm/nuvoton.rst | 2 +- hw/arm/smmuv3-internal.h | 7 + include/hw/arm/npcm7xx.h | 2 + include/hw/arm/smmu-common.h | 2 - include/hw/arm/smmuv3.h | 1 + include/hw/intc/armv7m_nvic.h | 128 +++++++++++++++++- include/hw/ssi/npcm_pspi.h | 53 ++++++++ linux-user/user-internals.h | 2 +- target/arm/cpregs.h | 98 ++++++++++++++ target/arm/cpu.h | 228 ++------------------------------- target/arm/internals.h | 14 -- hw/arm/npcm7xx.c | 25 +++- hw/arm/smmu-common.c | 4 +- hw/arm/smmuv3.c | 43 ++++++- hw/arm/virt.c | 10 +- hw/intc/armv7m_nvic.c | 38 ++---- hw/ssi/npcm_pspi.c | 221 ++++++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 4 +- target/arm/cpu.c | 5 +- target/arm/cpu_tcg.c | 3 + target/arm/helper.c | 31 +++-- target/arm/m_helper.c | 86 +++++++------ target/arm/machine.c | 18 +-- tests/qtest/arm-cpu-features.c | 28 ++-- hw/arm/Kconfig | 1 + hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + tests/avocado/avocado_qemu/__init__.py | 4 + tests/avocado/boot_linux.py | 48 ++----- tests/avocado/boot_linux_console.py | 1 + tests/avocado/machine_aarch64_virt.py | 63 ++++++++- tests/avocado/reverse_debugging.py | 8 ++ tests/qtest/meson.build | 4 +- 34 files changed, 798 insertions(+), 399 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro, similarly to automatic conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_NVIC "armv7m_nvic" - -typedef struct NVICState NVICState; -DECLARE_INSTANCE_CHECKER(NVICState, NVIC, - TYPE_NVIC) +OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return 0; } -#else +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + return ARMMMUIdx_MUser; +} + +#else /* !CONFIG_USER_ONLY */ /* * What kind of stack write are we doing? This affects how exceptions @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -#endif /* !CONFIG_USER_ONLY */ - ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, bool secstate, bool priv, bool negpri) { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } + +#endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv() are only used for system emulation in m_helper.c. Move the definitions to avoid prototype forward declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 -------- target/arm/m_helper.c | 74 +++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 51 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); -/* - * Return the MMU index for a v7M CPU with all relevant information - * manually specified. - */ -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri); - -/* - * Return the MMU index for a v7M CPU in the specified security and - * privilege state. - */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv); - /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) #else /* !CONFIG_USER_ONLY */ +static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (negpri) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (negpri) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} - -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) -{ - bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); - - return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); -} - -/* Return the MMU index for a v7M CPU in the specified security state */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) -{ - bool priv = arm_v7m_is_handler_mode(env) || - !(env->v7m.control[secstate] & 1); - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} - #endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } +#ifndef CONFIG_USER_ONLY /* * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. @@ -XXX,XX +XXX,XX @@ static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) return pfr1; } -#ifndef CONFIG_USER_ONLY static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_NO_RAW, .accessfn = access_aa32_tid3, +#ifdef CONFIG_USER_ONLY + .type = ARM_CP_CONST, + .resetvalue = cpu->isar.id_pfr1, +#else + .type = ARM_CP_NO_RAW, + .accessfn = access_aa32_tid3, .readfn = id_pfr1_read, - .writefn = arm_cp_write_ignore }, + .writefn = arm_cp_write_ignore +#endif + }, { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/user-internals.h | 2 +- target/arm/cpu.h | 2 +- linux-user/arm/cpu_loop.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/user-internals.h +++ b/linux-user/user-internals.h @@ -XXX,XX +XXX,XX @@ void print_termios(void *arg); #ifdef TARGET_ARM static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { - return cpu_env->eabi == 1; + return cpu_env->eabi; } #elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32) static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ - int eabi; + bool eabi; #endif struct CPUBreakpoint *cpu_breakpoint[16]; diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_SWI: { - env->eabi = 1; + env->eabi = true; /* system call */ if (env->thumb) { /* Thumb is always EABI style with syscall number in r7 */ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) * > 0xfffff and are handled below as out-of-range. */ n ^= ARM_SYSCALL_BASE; - env->eabi = 0; + env->eabi = false; } } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Although the 'eabi' field is only used in user emulation where CPU reset doesn't occur, it doesn't belong to the area to reset. Move it after the 'end_reset_fields' for consistency. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMVectorReg zarray[ARM_MAX_VQ * 16]; #endif -#if defined(CONFIG_USER_ONLY) - /* For usermode syscall translation. */ - bool eabi; -#endif - struct CPUBreakpoint *cpu_breakpoint[16]; struct CPUWatchpoint *cpu_watchpoint[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; +#if defined(CONFIG_USER_ONLY) + /* For usermode syscall translation. */ + bool eabi; +#endif /* CONFIG_USER_ONLY */ #ifdef TARGET_TAGGED_ADDRESSES /* Linux syscall tagged address support */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { void *nvic; const struct arm_boot_info *boot_info; +#if !defined(CONFIG_USER_ONLY) /* Store GICv3CPUState to access from this struct */ void *gicv3state; -#if defined(CONFIG_USER_ONLY) +#else /* CONFIG_USER_ONLY */ /* For usermode syscall translation. */ bool eabi; #endif /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; void *nvic; - const struct arm_boot_info *boot_info; #if !defined(CONFIG_USER_ONLY) + const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; #else /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint32_t ctrl; } sau; - void *nvic; #if !defined(CONFIG_USER_ONLY) + void *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> There is no point in using a void pointer to access the NVIC. Use the real type to avoid casting it while debugging. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 46 ++++++++++++++++++++++--------------------- hw/intc/armv7m_nvic.c | 38 ++++++++++++----------------------- target/arm/cpu.c | 1 + target/arm/m_helper.c | 2 +- 4 files changed, 39 insertions(+), 48 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMTBFlags { typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; +typedef struct NVICState NVICState; + typedef struct CPUArchState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; #if !defined(CONFIG_USER_ONLY) - void *nvic; + NVICState *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, /* Interface between CPU and Interrupt controller. */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(void *opaque); +bool armv7m_nvic_can_take_pending_exception(NVICState *s); #else -static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) { return true; } #endif /** * armv7m_nvic_set_pending: mark the specified exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * exceptions (exceptions generated in the course of trying to take * a different exception). */ -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Similar to armv7m_nvic_set_pending(), but specifically for exceptions * generated in the course of lazy stacking of FP registers. */ -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state - * @opaque: the NVIC + * @s: the NVIC * @pirq: set to pending exception number * @ptargets_secure: set to whether pending exception targets Secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); * to true if the current highest priority pending exception should * be taken to Secure state, false for NS. */ -void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @opaque: the NVIC + * @s: the NVIC * * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. */ -void armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(NVICState *s); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to complete * @secure: true if this exception was secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); * interrupt the current execution priority. This controls whether the * RDY bit for it in the FPCCR is set. */ -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @opaque: the NVIC + * @s: the NVIC * * Returns: the raw execution priority as defined by the v8M architecture. * This is the execution priority minus the effects of AIRCR.PRIS, * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. * (v8M ARM ARM I_PKLD.) */ -int armv7m_nvic_raw_execution_priority(void *opaque); +int armv7m_nvic_raw_execution_priority(NVICState *s); /** * armv7m_nvic_neg_prio_requested: return true if the requested execution * priority is negative for the specified security state. - * @opaque: the NVIC + * @s: the NVIC * @secure: the security state to test * This corresponds to the pseudocode IsReqExecPriNeg(). */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); #else -static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { return false; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { /* Return true if the requested execution priority is negative * for the specified security state, ie that security state @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) * mean we don't allow FAULTMASK_NS to actually make the execution * priority negative). Compare pseudocode IsReqExcPriNeg(). */ - NVICState *s = opaque; - if (s->cpu->env.v7m.faultmask[secure]) { return true; } @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) return false; } -bool armv7m_nvic_can_take_pending_exception(void *opaque) +bool armv7m_nvic_can_take_pending_exception(NVICState *s) { - NVICState *s = opaque; - return nvic_exec_prio(s) > nvic_pending_prio(s); } -int armv7m_nvic_raw_execution_priority(void *opaque) +int armv7m_nvic_raw_execution_priority(NVICState *s) { - NVICState *s = opaque; - return s->exception_prio; } @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) +static void armv7m_nvic_clear_pending(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); @@ -XXX,XX +XXX,XX @@ static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, false); + do_armv7m_nvic_set_pending(s, irq, secure, false); } -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, true); + do_armv7m_nvic_set_pending(s, irq, secure, true); } -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure) { /* * Pend an exception during lazy FP stacking. This differs @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) * whether we should escalate depends on the saved context * in the FPCCR register, not on the current state of the CPU/NVIC. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(NVICState *s) { - NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); @@ -XXX,XX +XXX,XX @@ static bool vectpending_targets_secure(NVICState *s) exc_targets_secure(s, s->vectpending); } -void armv7m_nvic_get_pending_irq_info(void *opaque, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure) { - NVICState *s = (NVICState *)opaque; const int pending = s->vectpending; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, *pirq = pending; } -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; int ret = 0; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure) { /* * Return whether an exception is "ready", i.e. it is enabled and is @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) * for non-banked exceptions secure is always false; for banked exceptions * it indicates which of the exceptions is required. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; int running = nvic_exec_prio(s); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#include "hw/intc/armv7m_nvic.h" #endif #include "sysemu/tcg.h" #include "sysemu/qtest.h" diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, * that we will need later in order to do lazy FP reg stacking. */ bool is_secure = env->v7m.secure; - void *nvic = env->nvic; + NVICState *nvic = env->nvic; /* * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits * are banked and we want to update the bit in the bank for the -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While dozens of files include "cpu.h", only 3 files require these NVIC helper declarations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 123 ++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 123 ---------------------------------- target/arm/cpu.c | 4 +- target/arm/cpu_tcg.c | 3 + target/arm/m_helper.c | 3 + 5 files changed, 132 insertions(+), 124 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { qemu_irq sysresetreq; }; +/* Interface between CPU and Interrupt controller. */ +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @s: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, + bool *ptargets_secure); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @s: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + */ +void armv7m_nvic_acknowledge_irq(NVICState *s); +/** + * armv7m_nvic_complete_irq: complete specified interrupt or exception + * @s: the NVIC + * @irq: the exception number to complete + * @secure: true if this exception was secure + * + * Returns: -1 if the irq was not active + * 1 if completing this irq brought us back to base (no active irqs) + * 0 if there is still an irq active after this one was completed + * (Ignoring -1, this is the same as the RETTOBASE value before completion.) + */ +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_raw_execution_priority: return the raw execution priority + * @s: the NVIC + * + * Returns: the raw execution priority as defined by the v8M architecture. + * This is the execution priority minus the effects of AIRCR.PRIS, + * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. + * (v8M ARM ARM I_PKLD.) + */ +int armv7m_nvic_raw_execution_priority(NVICState *s); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @s: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) +{ + return false; +} +#endif +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_can_take_pending_exception(NVICState *s); +#else +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) +{ + return true; +} +#endif + #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface between CPU and Interrupt controller. */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(NVICState *s); -#else -static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) -{ - return true; -} -#endif -/** - * armv7m_nvic_set_pending: mark the specified exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Marks the specified exception as pending. Note that we will assert() - * if @secure is true and @irq does not specify one of the fixed set - * of architecturally banked exceptions. - */ -void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for derived - * exceptions (exceptions generated in the course of trying to take - * a different exception). - */ -void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for exceptions - * generated in the course of lazy stacking of FP registers. - */ -void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_pending_irq_info: return highest priority pending - * exception, and whether it targets Secure state - * @s: the NVIC - * @pirq: set to pending exception number - * @ptargets_secure: set to whether pending exception targets Secure - * - * This function writes the number of the highest priority pending - * exception (the one which would be made active by - * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure - * to true if the current highest priority pending exception should - * be taken to Secure state, false for NS. - */ -void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, - bool *ptargets_secure); -/** - * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @s: the NVIC - * - * Move the current highest priority pending exception from the pending - * state to the active state, and update v7m.exception to indicate that - * it is the exception currently being handled. - */ -void armv7m_nvic_acknowledge_irq(NVICState *s); -/** - * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @s: the NVIC - * @irq: the exception number to complete - * @secure: true if this exception was secure - * - * Returns: -1 if the irq was not active - * 1 if completing this irq brought us back to base (no active irqs) - * 0 if there is still an irq active after this one was completed - * (Ignoring -1, this is the same as the RETTOBASE value before completion.) - */ -int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Return whether an exception is "ready", i.e. whether the exception is - * enabled and is configured at a priority which would allow it to - * interrupt the current execution priority. This controls whether the - * RDY bit for it in the FPCCR is set. - */ -bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @s: the NVIC - * - * Returns: the raw execution priority as defined by the v8M architecture. - * This is the execution priority minus the effects of AIRCR.PRIS, - * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. - * (v8M ARM ARM I_PKLD.) - */ -int armv7m_nvic_raw_execution_priority(NVICState *s); -/** - * armv7m_nvic_neg_prio_requested: return true if the requested execution - * priority is negative for the specified security state. - * @s: the NVIC - * @secure: the security state to test - * This corresponds to the pseudocode IsReqExecPriNeg(). - */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); -#else -static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) -{ - return false; -} -#endif - /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs * which are passed to define_arm_cp_regs(). diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#ifdef CONFIG_TCG #include "hw/intc/armv7m_nvic.h" -#endif +#endif /* CONFIG_TCG */ +#endif /* !CONFIG_USER_ONLY */ #include "sysemu/tcg.h" #include "sysemu/qtest.h" #include "sysemu/hw_accel.h" diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" +#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) +#include "hw/intc/armv7m_nvic.h" +#endif /* Share AArch32 -cpu max features with AArch64. */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#if !defined(CONFIG_USER_ONLY) +#include "hw/intc/armv7m_nvic.h" +#endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, uint32_t reg, uint32_t val) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The two TCG tests for GICv2 and GICv3 are very heavy weight distros that take a long time to boot up, especially for an --enable-debug build. The total code coverage they give is: Overall coverage rate: lines......: 11.2% (59584 of 530123 lines) functions..: 15.0% (7436 of 49443 functions) branches...: 6.3% (19273 of 303933 branches) We already get pretty close to that with the machine_aarch64_virt tests which only does one full boot (~120s vs ~600s) of alpine. We expand the kernel+initrd boot (~8s) to test both GICs and also add an RNG device and a block device to generate a few IRQs and exercise the storage layer. With that we get to a coverage of: Overall coverage rate: lines......: 11.0% (58121 of 530123 lines) functions..: 14.9% (7343 of 49443 functions) branches...: 6.0% (18269 of 303933 branches) which I feel is close enough given the massive time saving. If we want to target any more sub-systems we can use lighter weight more directed tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux.py | 48 ++++---------------- tests/avocado/machine_aarch64_virt.py | 63 ++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 46 deletions(-) diff --git a/tests/avocado/boot_linux.py b/tests/avocado/boot_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux.py +++ b/tests/avocado/boot_linux.py @@ -XXX,XX +XXX,XX @@ def test_pc_q35_kvm(self): self.launch_and_wait(set_up_ssh_connection=False) -# For Aarch64 we only boot KVM tests in CI as the TCG tests are very -# heavyweight. There are lighter weight distros which we use in the -# machine_aarch64_virt.py tests. +# For Aarch64 we only boot KVM tests in CI as booting the current +# Fedora OS in TCG tests is very heavyweight. There are lighter weight +# distros which we use in the machine_aarch64_virt.py tests. class BootLinuxAarch64(LinuxTest): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:virt - :avocado: tags=machine:gic-version=2 """ timeout = 720 - def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) - self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') - self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv2(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv2 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=2") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv3(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv3 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=3") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - def test_virt_kvm(self): """ :avocado: tags=accel:kvm @@ -XXX,XX +XXX,XX @@ def test_virt_kvm(self): self.require_accelerator("kvm") self.vm.add_args("-accel", "kvm") self.vm.add_args("-machine", "virt,gic-version=host") - self.add_common_args() + self.vm.add_args('-bios', + os.path.join(BUILD_DIR, 'pc-bios', + 'edk2-aarch64-code.fd')) + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') self.launch_and_wait(set_up_ssh_connection=False) diff --git a/tests/avocado/machine_aarch64_virt.py b/tests/avocado/machine_aarch64_virt.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aarch64_virt.py +++ b/tests/avocado/machine_aarch64_virt.py @@ -XXX,XX +XXX,XX @@ import time import os +import logging from avocado_qemu import QemuSystemTest from avocado_qemu import wait_for_console_pattern from avocado_qemu import exec_command from avocado_qemu import BUILD_DIR +from avocado.utils import process +from avocado.utils.path import find_command class Aarch64VirtMachine(QemuSystemTest): KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 ' @@ -XXX,XX +XXX,XX @@ def test_alpine_virt_tcg_gic_max(self): self.wait_for_console_pattern('Welcome to Alpine Linux 3.16') - def test_aarch64_virt(self): + def common_aarch64_virt(self, machine): """ - :avocado: tags=arch:aarch64 - :avocado: tags=machine:virt - :avocado: tags=accel:tcg - :avocado: tags=cpu:max + Common code to launch basic virt machine with kernel+initrd + and a scratch disk. """ + logger = logging.getLogger('aarch64_virt') + kernel_url = ('https://fileserver.linaro.org/s/' 'z6B2ARM7DQT3HWN/download') - kernel_hash = 'ed11daab50c151dde0e1e9c9cb8b2d9bd3215347' kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) @@ -XXX,XX +XXX,XX @@ def test_aarch64_virt(self): 'console=ttyAMA0') self.require_accelerator("tcg") self.vm.add_args('-cpu', 'max,pauth-impdef=on', + '-machine', machine, '-accel', 'tcg', '-kernel', kernel_path, '-append', kernel_command_line) + + # A RNG offers an easy way to generate a few IRQs + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', + 'rng-random,id=rng0,filename=/dev/urandom') + + # Also add a scratch block device + logger.info('creating scratch qcow2 image') + image_path = os.path.join(self.workdir, 'scratch.qcow2') + qemu_img = os.path.join(BUILD_DIR, 'qemu-img') + if not os.path.exists(qemu_img): + qemu_img = find_command('qemu-img', False) + if qemu_img is False: + self.cancel('Could not find "qemu-img", which is required to ' + 'create the temporary qcow2 image') + cmd = '%s create -f qcow2 %s 8M' % (qemu_img, image_path) + process.run(cmd) + + # Add the device + self.vm.add_args('-blockdev', + f"driver=qcow2,file.driver=file,file.filename={image_path},node-name=scratch") + self.vm.add_args('-device', + 'virtio-blk-device,drive=scratch') + self.vm.launch() self.wait_for_console_pattern('Welcome to Buildroot') time.sleep(0.1) exec_command(self, 'root') time.sleep(0.1) + exec_command(self, 'dd if=/dev/hwrng of=/dev/vda bs=512 count=4') + time.sleep(0.1) + exec_command(self, 'md5sum /dev/vda') + time.sleep(0.1) + exec_command(self, 'cat /proc/interrupts') + time.sleep(0.1) exec_command(self, 'cat /proc/self/maps') time.sleep(0.1) + + def test_aarch64_virt_gicv3(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic_version=3") + + def test_aarch64_virt_gicv2(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic-version=2") -- 2.34.1 From: Mostafa Saleh <smostafa@google.com> GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 7 +++++++ include/hw/arm/smmuv3.h | 1 + hw/arm/smmuv3.c | 43 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(CR0ACK, 0x24) REG32(CR1, 0x28) REG32(CR2, 0x2c) REG32(STATUSR, 0x40) +REG32(GBPA, 0x44) + FIELD(GBPA, ABORT, 20, 1) + FIELD(GBPA, UPDATE, 31, 1) + +/* Use incoming. */ +#define SMMU_GBPA_RESET_VAL 0x1000 + REG32(IRQ_CTRL, 0x50) FIELD(IRQ_CTRL, GERROR_IRQEN, 0, 1) FIELD(IRQ_CTRL, PRI_IRQEN, 1, 1) diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmuv3.h +++ b/include/hw/arm/smmuv3.h @@ -XXX,XX +XXX,XX @@ struct SMMUv3State { uint32_t cr[3]; uint32_t cr0ack; uint32_t statusr; + uint32_t gbpa; uint32_t irq_ctrl; uint32_t gerror; uint32_t gerrorn; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->gerror = 0; s->gerrorn = 0; s->statusr = 0; + s->gbpa = SMMU_GBPA_RESET_VAL; } static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf, @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr, qemu_mutex_lock(&s->mutex); if (!smmu_enabled(s)) { - status = SMMU_TRANS_DISABLE; + if (FIELD_EX32(s->gbpa, GBPA, ABORT)) { + status = SMMU_TRANS_ABORT; + } else { + status = SMMU_TRANS_DISABLE; + } goto epilogue; } @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr offset, case A_GERROR_IRQ_CFG2: s->gerror_irq_cfg2 = data; return MEMTX_OK; + case A_GBPA: + /* + * If UPDATE is not set, the write is ignored. This is the only + * permitted behavior in SMMUv3.2 and later. + */ + if (data & R_GBPA_UPDATE_MASK) { + /* Ignore update bit as write is synchronous. */ + s->gbpa = data & ~R_GBPA_UPDATE_MASK; + } + return MEMTX_OK; case A_STRTAB_BASE: /* 64b */ s->strtab_base = deposit64(s->strtab_base, 0, 32, data); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr offset, case A_STATUSR: *data = s->statusr; return MEMTX_OK; + case A_GBPA: + *data = s->gbpa; + return MEMTX_OK; case A_IRQ_CTRL: case A_IRQ_CTRL_ACK: *data = s->irq_ctrl; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3_queue = { }, }; +static bool smmuv3_gbpa_needed(void *opaque) +{ + SMMUv3State *s = opaque; + + /* Only migrate GBPA if it has different reset value. */ + return s->gbpa != SMMU_GBPA_RESET_VAL; +} + +static const VMStateDescription vmstate_gbpa = { + .name = "smmuv3/gbpa", + .version_id = 1, + .minimum_version_id = 1, + .needed = smmuv3_gbpa_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gbpa, SMMUv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { VMSTATE_END_OF_LIST(), }, + .subsections = (const VMStateDescription * []) { + &vmstate_gbpa, + NULL + } }; static void smmuv3_instance_init(Object *obj) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config XLNX_ZYNQMP_ARM select XLNX_CSU_DMA select XLNX_ZYNQMP select XLNX_ZDMA + select USB_DWC3 config XLNX_VERSAL bool -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (vms->secure && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Security extensions (TrustZone) to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->mte && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Havard is no longer working on the Nuvoton systems for a while and won't be able to do any work on it in the future. So I'll take over maintaining the Nuvoton system from him. Signed-off-by: Hao Wu <wuhaotsh@google.com> Acked-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/net/mv88w8618_eth.h F: docs/system/arm/musicpal.rst Nuvoton NPCM7xx -M: Havard Skinnemoen <hskinnemoen@google.com> M: Tyrone Ting <kfting@nuvoton.com> +M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Nuvoton's PSPI is a general purpose SPI module which enables connections to SPI-based peripheral devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 6 +- include/hw/ssi/npcm_pspi.h | 53 +++++++++ hw/ssi/npcm_pspi.c | 221 +++++++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + 5 files changed, 283 insertions(+), 4 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Tyrone Ting <kfting@nuvoton.com> M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported -F: hw/*/npcm7xx* -F: include/hw/*/npcm7xx* -F: tests/qtest/npcm7xx* +F: hw/*/npcm* +F: include/hw/*/npcm* +F: tests/qtest/npcm* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst diff --git a/include/hw/ssi/npcm_pspi.h b/include/hw/ssi/npcm_pspi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/npcm_pspi.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton Peripheral SPI Module + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM_PSPI_H +#define NPCM_PSPI_H + +#include "hw/ssi/ssi.h" +#include "hw/sysbus.h" + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM_PSPI_NR_REGS 3 + +/** + * NPCMPSPIState - Device state for one Flash Interface Unit. + * @parent: System bus device. + * @mmio: Memory region for register access. + * @spi: The SPI bus mastered by this controller. + * @regs: Register contents. + * @irq: The interrupt request queue for this module. + * + * Each PSPI has a shared bank of registers, and controls up to four chip + * selects. Each chip select has a dedicated memory region which may be used to + * read and write the flash connected to that chip select as if it were memory. + */ +typedef struct NPCMPSPIState { + SysBusDevice parent; + + MemoryRegion mmio; + + SSIBus *spi; + uint16_t regs[NPCM_PSPI_NR_REGS]; + qemu_irq irq; +} NPCMPSPIState; + +#define TYPE_NPCM_PSPI "npcm-pspi" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPSPIState, NPCM_PSPI) + +#endif /* NPCM_PSPI_H */ diff --git a/hw/ssi/npcm_pspi.c b/hw/ssi/npcm_pspi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/npcm_pspi.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM Peripheral SPI Module (PSPI) + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/irq.h" +#include "hw/registerfields.h" +#include "hw/ssi/npcm_pspi.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +REG16(PSPI_DATA, 0x0) +REG16(PSPI_CTL1, 0x2) + FIELD(PSPI_CTL1, SPIEN, 0, 1) + FIELD(PSPI_CTL1, MOD, 2, 1) + FIELD(PSPI_CTL1, EIR, 5, 1) + FIELD(PSPI_CTL1, EIW, 6, 1) + FIELD(PSPI_CTL1, SCM, 7, 1) + FIELD(PSPI_CTL1, SCIDL, 8, 1) + FIELD(PSPI_CTL1, SCDV, 9, 7) +REG16(PSPI_STAT, 0x4) + FIELD(PSPI_STAT, BSY, 0, 1) + FIELD(PSPI_STAT, RBF, 1, 1) + +static void npcm_pspi_update_irq(NPCMPSPIState *s) +{ + int level = 0; + + /* Only fire IRQ when the module is enabled. */ + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, SPIEN)) { + /* Update interrupt as BSY is cleared. */ + if ((!FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, BSY)) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIW)) { + level = 1; + } + + /* Update interrupt as RBF is set. */ + if (FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, RBF) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIR)) { + level = 1; + } + } + qemu_set_irq(s->irq, level); +} + +static uint16_t npcm_pspi_read_data(NPCMPSPIState *s) +{ + uint16_t value = s->regs[R_PSPI_DATA]; + + /* Clear stat bits as the value are read out. */ + s->regs[R_PSPI_STAT] = 0; + + return value; +} + +static void npcm_pspi_write_data(NPCMPSPIState *s, uint16_t data) +{ + uint16_t value = 0; + + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, MOD)) { + value = ssi_transfer(s->spi, extract16(data, 8, 8)) << 8; + } + value |= ssi_transfer(s->spi, extract16(data, 0, 8)); + s->regs[R_PSPI_DATA] = value; + + /* Mark data as available */ + s->regs[R_PSPI_STAT] = R_PSPI_STAT_BSY_MASK | R_PSPI_STAT_RBF_MASK; +} + +/* Control register read handler. */ +static uint64_t npcm_pspi_ctrl_read(void *opaque, hwaddr addr, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value; + + switch (addr) { + case A_PSPI_DATA: + value = npcm_pspi_read_data(s); + break; + + case A_PSPI_CTL1: + value = s->regs[R_PSPI_CTL1]; + break; + + case A_PSPI_STAT: + value = s->regs[R_PSPI_STAT]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return 0; + } + trace_npcm_pspi_ctrl_read(DEVICE(s)->canonical_path, addr, value); + npcm_pspi_update_irq(s); + + return value; +} + +/* Control register write handler. */ +static void npcm_pspi_ctrl_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value = v; + + trace_npcm_pspi_ctrl_write(DEVICE(s)->canonical_path, addr, value); + + switch (addr) { + case A_PSPI_DATA: + npcm_pspi_write_data(s, value); + break; + + case A_PSPI_CTL1: + s->regs[R_PSPI_CTL1] = value; + break; + + case A_PSPI_STAT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register PSPI_STAT: 0x%08" + PRIx64 "\n", DEVICE(s)->canonical_path, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return; + } + npcm_pspi_update_irq(s); +} + +static const MemoryRegionOps npcm_pspi_ctrl_ops = { + .read = npcm_pspi_ctrl_read, + .write = npcm_pspi_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 2, + .unaligned = false, + }, + .impl = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pspi_enter_reset(Object *obj, ResetType type) +{ + NPCMPSPIState *s = NPCM_PSPI(obj); + + trace_npcm_pspi_enter_reset(DEVICE(obj)->canonical_path, type); + memset(s->regs, 0, sizeof(s->regs)); +} + +static void npcm_pspi_realize(DeviceState *dev, Error **errp) +{ + NPCMPSPIState *s = NPCM_PSPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj = OBJECT(dev); + + s->spi = ssi_create_bus(dev, "pspi"); + memory_region_init_io(&s->mmio, obj, &npcm_pspi_ctrl_ops, s, + "mmio", 4 * KiB); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); +} + +static const VMStateDescription vmstate_npcm_pspi = { + .name = "npcm-pspi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16_ARRAY(regs, NPCMPSPIState, NPCM_PSPI_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + + +static void npcm_pspi_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM Peripheral SPI Module"; + dc->realize = npcm_pspi_realize; + dc->vmsd = &vmstate_npcm_pspi; + rc->phases.enter = npcm_pspi_enter_reset; +} + +static const TypeInfo npcm_pspi_types[] = { + { + .name = TYPE_NPCM_PSPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPSPIState), + .class_init = npcm_pspi_class_init, + }, +}; +DEFINE_TYPES(npcm_pspi_types); diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c')) -softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c', 'npcm_pspi.c')) softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_SPI', if_true: files('sifive_spi.c')) softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 +# npcm_pspi.c +npcm_pspi_enter_reset(const char *id, int reset_type) "%s reset type: %d" +npcm_pspi_ctrl_read(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 +npcm_pspi_ctrl_write(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 + # ibex_spi_host.c ibex_spi_host_reset(const char *msg) "%s" -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 25 +++++++++++++++++++++++-- 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * SMBus controller (SMBF) * Ethernet controller (EMC) * Tachometer + * Peripheral SPI controller (PSPI) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controller (GMAC) * USB device (USBD) - * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface * PCI and PCIe root complex and bridges diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/ssi/npcm_pspi.h" #include "hw/usb/hcd-ehci.h" #include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; + NPCMPSPIState pspi[2]; }; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_EMC1RX_IRQ = 15, NPCM7XX_EMC1TX_IRQ, NPCM7XX_MMC_IRQ = 26, + NPCM7XX_PSPI2_IRQ = 28, + NPCM7XX_PSPI1_IRQ = 31, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_emc_addr[] = { 0xf0826000, }; +/* Register base address for each PSPI Module */ +static const hwaddr npcm7xx_pspi_addr[] = { + 0xf0200000, + 0xf0201000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); } + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + object_initialize_child(obj, "pspi[*]", &s->pspi[i], TYPE_NPCM_PSPI); + } + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, npcm7xx_irq(s, NPCM7XX_MMC_IRQ)); + /* PSPI */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pspi_addr) != ARRAY_SIZE(s->pspi)); + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pspi[i]); + int irq = (i == 0) ? NPCM7XX_PSPI1_IRQ : NPCM7XX_PSPI2_IRQ; + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pspi_addr[i]); + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, irq)); + } + create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB); create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB); create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB); create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 2 -- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ #define SMMU_PCI_DEVFN_MAX 256 #define SMMU_PCI_DEVFN(sid) (sid & 0xFF) -#define SMMU_MAX_VA_BITS 48 - /* * Page table walk error types */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) memory_region_init_iommu(&sdev->iommu, sizeof(sdev->iommu), s->mrtypename, - OBJECT(s), name, 1ULL << SMMU_MAX_VA_BITS); + OBJECT(s), name, UINT64_MAX); address_space_init(&sdev->as, MEMORY_REGION(&sdev->iommu), name); trace_smmu_add_mr(name); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova) /* there is a ttbr0 region and we are in it (high bits all zero) */ return &cfg->tt[0]; } else if (cfg->tt[1].tsz && - !extract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte)) { + sextract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte) == -1) { /* there is a ttbr1 region and we are in it (high bits all one) */ return &cfg->tt[1]; } else if (!cfg->tt[0].tsz) { -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> make it clearer from the name that this is a tcg-only function. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) * trapped to the hypervisor in KVM. */ #ifdef CONFIG_TCG -static void handle_semihosting(CPUState *cs) +static void tcg_handle_semihosting(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) */ #ifdef CONFIG_TCG if (cs->exception_index == EXCP_SEMIHOST) { - handle_semihosting(cs); + tcg_handle_semihosting(cs); return; } #endif -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> for "all" builds (tcg + kvm), we want to avoid doing the psci check if tcg is built-in, but not enabled. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) env->exception.syndrome); } - if (arm_is_psci_call(cpu, cs->exception_index)) { + if (tcg_enabled() && arm_is_psci_call(cpu, cs->exception_index)) { arm_handle_psci_call(cpu); qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); return; -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) unsigned int cur_el = arm_current_el(env); int rt; - /* - * Note that new_el can never be 0. If cur_el is 0, then - * el0_a64 is is_a64(), else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + if (tcg_enabled()) { + /* + * Note that new_el can never be 0. If cur_el is 0, then + * el0_a64 is is_a64(), else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + } if (cur_el < new_el) { /* -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Move this earlier to make the next patch diff cleaner. While here update the comment slightly to not give the impression that the misalignment affects only TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } + /* + * Misaligned thumb pc is architecturally impossible. Fail the + * incoming migration. For TCG it would trigger the assert in + * thumb_tr_translate_insn(). + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } - /* - * Misaligned thumb pc is architecturally impossible. - * We have an assert in thumb_tr_translate_insn to verify this. - * Fail an incoming migrate to avoid this assert. - */ - if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { - return -1; - } - if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have a cpregs.h header which is more suitable for this code. Code moved verbatim. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 98 +++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 91 ----------------------------------------- 2 files changed, 98 insertions(+), 91 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SME = 1 << 19, }; +/* + * Interface for defining coprocessor registers. + * Registers are defined in tables of arm_cp_reginfo structs + * which are passed to define_arm_cp_regs(). + */ + +/* + * When looking up a coprocessor register we look for it + * via an integer which encodes all of: + * coprocessor number + * Crn, Crm, opc1, opc2 fields + * 32 or 64 bit register (ie is it accessed via MRC/MCR + * or via MRRC/MCRR?) + * non-secure/secure bank (AArch32 only) + * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. + * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). + */ +/* + * This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + +/* + * To enable banking of coprocessor registers depending on ns-bit we + * add a bit to distinguish between secure and non-secure cpregs in the + * hashtable. + */ +#define CP_REG_NS_SHIFT 29 +#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) + +#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ + ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ + ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) + +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + +/* + * Convert a full 64 bit KVM register ID to the truncated 32 bit + * version used as a key for the coprocessor register hashtable + */ +static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) +{ + uint32_t cpregid = kvmid; + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else { + if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + cpregid |= (1 << 15); + } + + /* + * KVM is always non-secure so add the NS flag on AArch32 register + * entries. + */ + cpregid |= 1 << CP_REG_NS_SHIFT; + } + return cpregid; +} + +/* + * Convert a truncated 32 bit hashtable key into the full + * 64 bit KVM register ID. + */ +static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) +{ + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; + } else { + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } + } + return kvmid; +} + /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface for defining coprocessor registers. - * Registers are defined in tables of arm_cp_reginfo structs - * which are passed to define_arm_cp_regs(). - */ - -/* When looking up a coprocessor register we look for it - * via an integer which encodes all of: - * coprocessor number - * Crn, Crm, opc1, opc2 fields - * 32 or 64 bit register (ie is it accessed via MRC/MCR - * or via MRRC/MCRR?) - * non-secure/secure bank (AArch32 only) - * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. - * (In this case crn and opc2 should be zero.) - * For AArch64, there is no 32/64 bit size distinction; - * instead all registers have a 2 bit op0, 3 bit op1 and op2, - * and 4 bit CRn and CRm. The encoding patterns are chosen - * to be easy to convert to and from the KVM encodings, and also - * so that the hashtable can contain both AArch32 and AArch64 - * registers (to allow for interprocessing where we might run - * 32 bit code on a 64 bit core). - */ -/* This bit is private to our hashtable cpreg; in KVM register - * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 - * in the upper bits of the 64 bit ID. - */ -#define CP_REG_AA64_SHIFT 28 -#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) - -/* To enable banking of coprocessor registers depending on ns-bit we - * add a bit to distinguish between secure and non-secure cpregs in the - * hashtable. - */ -#define CP_REG_NS_SHIFT 29 -#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) - -#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ - ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ - ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) - -#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ - (CP_REG_AA64_MASK | \ - ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ - ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ - ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ - ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ - ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ - ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) - -/* Convert a full 64 bit KVM register ID to the truncated 32 bit - * version used as a key for the coprocessor register hashtable - */ -static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) -{ - uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { - cpregid |= CP_REG_AA64_MASK; - } else { - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { - cpregid |= (1 << 15); - } - - /* KVM is always non-secure so add the NS flag on AArch32 register - * entries. - */ - cpregid |= 1 << CP_REG_NS_SHIFT; - } - return cpregid; -} - -/* Convert a truncated 32 bit hashtable key into the full - * 64 bit KVM register ID. - */ -static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) -{ - uint64_t kvmid; - - if (cpregid & CP_REG_AA64_MASK) { - kvmid = cpregid & ~CP_REG_AA64_MASK; - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; - } else { - kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; - } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; - } - } - return kvmid; -} - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> If a test was tagged with the "accel" tag and the specified accelerator it not present in the qemu binary, cancel the test. We can now write tests without explicit calls to require_accelerator, just the tag is enough. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/avocado_qemu/__init__.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/avocado/avocado_qemu/__init__.py b/tests/avocado/avocado_qemu/__init__.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/avocado_qemu/__init__.py +++ b/tests/avocado/avocado_qemu/__init__.py @@ -XXX,XX +XXX,XX @@ def setUp(self): super().setUp('qemu-system-') + accel_required = self._get_unique_tag_val('accel') + if accel_required: + self.require_accelerator(accel_required) + self.machine = self.params.get('machine', default=self._get_unique_tag_val('machine')) -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> This allows the test to be skipped when TCG is not present in the QEMU binary. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 1 + tests/avocado/reverse_debugging.py | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_orangepi_uboot_netbsd9(self): def test_aarch64_raspi3_atf(self): """ + :avocado: tags=accel:tcg :avocado: tags=arch:aarch64 :avocado: tags=machine:raspi3b :avocado: tags=cpu:cortex-a53 diff --git a/tests/avocado/reverse_debugging.py b/tests/avocado/reverse_debugging.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/reverse_debugging.py +++ b/tests/avocado/reverse_debugging.py @@ -XXX,XX +XXX,XX @@ def reverse_debugging(self, shift=7, args=None): vm.shutdown() class ReverseDebugging_X86_64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 0x10 REG_CS = 0x12 def get_pc(self, g): @@ -XXX,XX +XXX,XX @@ def test_x86_64_pc(self): self.reverse_debugging() class ReverseDebugging_AArch64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 32 # unidentified gitlab timeout problem -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->minimum_page_bits = 12; mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = virt_cpu_index_to_props; +#ifdef CONFIG_TCG mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); +#else + mc->default_cpu_type = ARM_CPU_TYPE_NAME("max"); +#endif mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; assert(!mc->get_hotplug_handler); -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ #define SVE_MAX_VQ 16 #define MACHINE "-machine virt,gic-version=max -accel tcg " -#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm -accel tcg " +#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm " #define QUERY_HEAD "{ 'execute': 'query-cpu-model-expansion', " \ " 'arguments': { 'type': 'full', " #define QUERY_TAIL "}}" @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { g_test_init(&argc, &argv, NULL); - qtest_add_data_func("/arm/query-cpu-model-expansion", - NULL, test_query_cpu_model_expansion); + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/query-cpu-model-expansion", + NULL, test_query_cpu_model_expansion); + } + + if (!g_str_equal(qtest_get_arch(), "aarch64")) { + goto out; + } /* * For now we only run KVM specific tests with AArch64 QEMU in * order avoid attempting to run an AArch32 QEMU with KVM on * AArch64 hosts. That won't work and isn't easy to detect. */ - if (g_str_equal(qtest_get_arch(), "aarch64") && qtest_has_accel("kvm")) { + if (qtest_has_accel("kvm")) { /* * This tests target the 'host' CPU type, so register it only if * KVM is available. */ qtest_add_data_func("/arm/kvm/query-cpu-model-expansion", NULL, test_query_cpu_model_expansion_kvm); - } - if (g_str_equal(qtest_get_arch(), "aarch64")) { - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", - NULL, sve_tests_sve_max_vq_8); - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", - NULL, sve_tests_sve_off); qtest_add_data_func("/arm/kvm/query-cpu-model-expansion/sve-off", NULL, sve_tests_sve_off_kvm); } + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", + NULL, sve_tests_sve_max_vq_8); + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", + NULL, sve_tests_sve_off); + } + +out: return g_test_run(); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> These tests set -accel tcg, so restrict them to when TCG is present. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_arm = \ # TODO: once aarch64 TCG is fixed on ARM 32 bit host, make bios-tables-test unconditional qtests_aarch64 = \ (cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ + (config_all.has_key('CONFIG_TCG') and config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? \ + ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ ['arm-cpu-features', -- 2.34.1