Nothing much exciting here, but it's 37 patches worth... thanks -- PMM The following changes since commit e64a62df378a746c0b257105959613c9f8122e59: Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-040320-1' into staging (2020-03-05 12:13:51 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200305 for you to fetch changes up to 597d61a3b1f94c53a3aaa77671697c0c5f797dbf: target/arm: Clean address for DC ZVA (2020-03-05 16:09:21 +0000) ---------------------------------------------------------------- * versal: Implement ADMA * Implement (trivially) ARMv8.2-TTCNP * hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus * Remove unnecessary endianness-handling on some boards * Avoid minor memory leaks from timer_new in some devices * Honour more of the HCR_EL2 trap bits * Complain rather than ignoring bad command line options for cubieboard * Honour TBI for DC ZVA and exception return ---------------------------------------------------------------- Edgar E. Iglesias (2): hw/arm: versal: Add support for the LPD ADMAs hw/arm: versal: Generate xlnx-versal-virt zdma FDT nodes Eric Auger (1): hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus Niek Linnenbank (4): hw/arm/cubieboard: use ARM Cortex-A8 as the default CPU in machine definition hw/arm/cubieboard: restrict allowed CPU type to ARM Cortex-A8 hw/arm/cubieboard: restrict allowed RAM size to 512MiB and 1GiB hw/arm/cubieboard: report error when using unsupported -bios argument Pan Nengyuan (4): hw/arm/pxa2xx: move timer_new from init() into realize() to avoid memleaks hw/arm/spitz: move timer_new from init() into realize() to avoid memleaks hw/arm/strongarm: move timer_new from init() into realize() to avoid memleaks hw/timer/cadence_ttc: move timer_new from init() into realize() to avoid memleaks Peter Maydell (1): target/arm: Implement (trivially) ARMv8.2-TTCNP Philippe Mathieu-Daudé (6): hw/arm/smmu-common: Simplify smmu_find_smmu_pcibus() logic hw/arm/gumstix: Simplify since the machines are little-endian only hw/arm/mainstone: Simplify since the machines are little-endian only hw/arm/omap_sx1: Simplify since the machines are little-endian only hw/arm/z2: Simplify since the machines are little-endian only hw/arm/musicpal: Simplify since the machines are little-endian only Richard Henderson (19): target/arm: Improve masking of HCR/HCR2 RES0 bits target/arm: Add HCR_EL2 bit definitions from ARMv8.6 target/arm: Disable has_el2 and has_el3 for user-only target/arm: Remove EL2 and EL3 setup from user-only target/arm: Improve masking in arm_hcr_el2_eff target/arm: Honor the HCR_EL2.{TVM,TRVM} bits target/arm: Honor the HCR_EL2.TSW bit target/arm: Honor the HCR_EL2.TACR bit target/arm: Honor the HCR_EL2.TPCP bit target/arm: Honor the HCR_EL2.TPU bit target/arm: Honor the HCR_EL2.TTLB bit tests/tcg/aarch64: Add newline in pauth-1 printf target/arm: Replicate TBI/TBID bits for single range regimes target/arm: Optimize cpu_mmu_index target/arm: Introduce core_to_aa64_mmu_idx target/arm: Apply TBI to ESR_ELx in helper_exception_return target/arm: Move helper_dc_zva to helper-a64.c target/arm: Use DEF_HELPER_FLAGS for helper_dc_zva target/arm: Clean address for DC ZVA include/hw/arm/xlnx-versal.h | 6 + target/arm/cpu.h | 30 ++-- target/arm/helper-a64.h | 1 + target/arm/helper.h | 1 - target/arm/internals.h | 6 + hw/arm/cubieboard.c | 29 +++- hw/arm/gumstix.c | 16 +- hw/arm/mainstone.c | 8 +- hw/arm/musicpal.c | 10 -- hw/arm/omap_sx1.c | 11 +- hw/arm/pxa2xx.c | 17 +- hw/arm/smmu-common.c | 20 +-- hw/arm/spitz.c | 8 +- hw/arm/strongarm.c | 18 ++- hw/arm/xlnx-versal-virt.c | 28 ++++ hw/arm/xlnx-versal.c | 24 +++ hw/arm/z2.c | 8 +- hw/timer/cadence_ttc.c | 18 ++- target/arm/cpu.c | 13 +- target/arm/cpu64.c | 2 + target/arm/helper-a64.c | 114 ++++++++++++- target/arm/helper.c | 373 ++++++++++++++++++++++++++++++------------- target/arm/op_helper.c | 93 ----------- target/arm/translate-a64.c | 4 +- tests/tcg/aarch64/pauth-1.c | 2 +- 25 files changed, 551 insertions(+), 309 deletions(-) From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Add support for the Versal LPD ADMAs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 6 ++++++ hw/arm/xlnx-versal.c | 24 ++++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #define XLNX_VERSAL_NR_ACPUS 2 #define XLNX_VERSAL_NR_UARTS 2 #define XLNX_VERSAL_NR_GEMS 2 +#define XLNX_VERSAL_NR_ADMAS 8 #define XLNX_VERSAL_NR_IRQS 192 typedef struct Versal { @@ -XXX,XX +XXX,XX @@ typedef struct Versal { struct { SysBusDevice *uart[XLNX_VERSAL_NR_UARTS]; SysBusDevice *gem[XLNX_VERSAL_NR_GEMS]; + SysBusDevice *adma[XLNX_VERSAL_NR_ADMAS]; } iou; } lpd; @@ -XXX,XX +XXX,XX @@ typedef struct Versal { #define VERSAL_GEM0_WAKE_IRQ_0 57 #define VERSAL_GEM1_IRQ_0 58 #define VERSAL_GEM1_WAKE_IRQ_0 59 +#define VERSAL_ADMA_IRQ_0 60 /* Architecturally reserved IRQs suitable for virtualization. */ #define VERSAL_RSVD_IRQ_FIRST 111 @@ -XXX,XX +XXX,XX @@ typedef struct Versal { #define MM_GEM1 0xff0d0000U #define MM_GEM1_SIZE 0x10000 +#define MM_ADMA_CH0 0xffa80000U +#define MM_ADMA_CH0_SIZE 0x10000 + #define MM_OCM 0xfffc0000U #define MM_OCM_SIZE 0x40000 diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_gems(Versal *s, qemu_irq *pic) } } +static void versal_create_admas(Versal *s, qemu_irq *pic) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.adma); i++) { + char *name = g_strdup_printf("adma%d", i); + DeviceState *dev; + MemoryRegion *mr; + + dev = qdev_create(NULL, "xlnx.zdma"); + s->lpd.iou.adma[i] = SYS_BUS_DEVICE(dev); + object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); + qdev_init_nofail(dev); + + mr = sysbus_mmio_get_region(s->lpd.iou.adma[i], 0); + memory_region_add_subregion(&s->mr_ps, + MM_ADMA_CH0 + i * MM_ADMA_CH0_SIZE, mr); + + sysbus_connect_irq(s->lpd.iou.adma[i], 0, pic[VERSAL_ADMA_IRQ_0 + i]); + g_free(name); + } +} + /* This takes the board allocated linear DDR memory and creates aliases * for each split DDR range/aperture on the Versal address map. */ @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_apu_gic(s, pic); versal_create_uarts(s, pic); versal_create_gems(s, pic); + versal_create_admas(s, pic); versal_map_ddr(s); versal_unimp(s); -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Generate xlnx-versal-virt zdma FDT nodes. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-versal-virt.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_gem_nodes(VersalVirt *s) } } +static void fdt_add_zdma_nodes(VersalVirt *s) +{ + const char clocknames[] = "clk_main\0clk_apb"; + const char compat[] = "xlnx,zynqmp-dma-1.0"; + int i; + + for (i = XLNX_VERSAL_NR_ADMAS - 1; i >= 0; i--) { + uint64_t addr = MM_ADMA_CH0 + MM_ADMA_CH0_SIZE * i; + char *name = g_strdup_printf("/dma@%" PRIx64, addr); + + qemu_fdt_add_subnode(s->fdt, name); + + qemu_fdt_setprop_cell(s->fdt, name, "xlnx,bus-width", 64); + qemu_fdt_setprop_cells(s->fdt, name, "clocks", + s->phandle.clk_25Mhz, s->phandle.clk_25Mhz); + qemu_fdt_setprop(s->fdt, name, "clock-names", + clocknames, sizeof(clocknames)); + qemu_fdt_setprop_cells(s->fdt, name, "interrupts", + GIC_FDT_IRQ_TYPE_SPI, VERSAL_ADMA_IRQ_0 + i, + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, addr, 2, 0x1000); + qemu_fdt_setprop(s->fdt, name, "compatible", compat, sizeof(compat)); + g_free(name); + } +} + static void fdt_nop_memory_nodes(void *fdt, Error **errp) { Error *err = NULL; @@ -XXX,XX +XXX,XX @@ static void versal_virt_init(MachineState *machine) fdt_add_uart_nodes(s); fdt_add_gic_nodes(s); fdt_add_timer_nodes(s); + fdt_add_zdma_nodes(s); fdt_add_cpu_nodes(s, psci_conduit); fdt_add_clk_node(s, "/clk125", 125000000, s->phandle.clk_125Mhz); fdt_add_clk_node(s, "/clk25", 25000000, s->phandle.clk_25Mhz); -- 2.20.1 The ARMv8.2-TTCNP extension allows an implementation to optimize by sharing TLB entries between multiple cores, provided that software declares that it's ready to deal with this by setting a CnP bit in the TTBRn_ELx. It is mandatory from ARMv8.2 onward. For QEMU's TLB implementation, sharing TLB entries between different cores would not really benefit us and would be a lot of work to implement. So we implement this extension in the "trivial" manner: we allow the guest to set and read back the CnP bit, but don't change our behaviour (this is an architecturally valid implementation choice). The only code path which looks at the TTBRn_ELx values for the long-descriptor format where the CnP bit is defined is already doing enough masking to not get confused when the CnP bit at the bottom of the register is set, so we can simply add a comment noting why we're relying on that mask. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200225193822.18874-1-peter.maydell@linaro.org --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 2 ++ target/arm/helper.c | 4 ++++ 3 files changed, 7 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = cpu->isar.id_mmfr4; t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ cpu->isar.id_mmfr4 = t; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); + t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ cpu->isar.id_aa64mmfr2 = t; /* Replicate the same data to the 32-bit id registers. */ @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) u = cpu->isar.id_mmfr4; u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + u = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ cpu->isar.id_mmfr4 = u; u = cpu->isar.id_aa64dfr0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, /* Now we can extract the actual base address from the TTBR */ descaddr = extract64(ttbr, 0, 48); + /* + * We rely on this masking to clear the RES0 bits at the bottom of the TTBR + * and also to mask out CnP (bit 0) which could validly be non-zero. + */ descaddr &= ~indexmask; /* The address field in the descriptor goes up to bit 39 for ARMv7 -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Make sure a null SMMUPciBus is returned in case we were not able to identify a pci bus matching the @bus_num. This matches the fix done on intel iommu in commit: a2e1cd41ccfe796529abfd1b6aeb1dd4393762a2 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200226172628.17449-1-eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUPciBus *smmu_find_smmu_pcibus(SMMUState *s, uint8_t bus_num) return smmu_pci_bus; } } + smmu_pci_bus = NULL; } return smmu_pci_bus; } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The smmu_find_smmu_pcibus() function was introduced (in commit cac994ef43b) in a code format that could return an incorrect pointer, which was then fixed by the previous commit. We could have avoided this by writing the if() statement differently. Do it now, in case this function is re-used. The code is easier to review (harder to miss bugs). Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, SMMUPciBus *smmu_find_smmu_pcibus(SMMUState *s, uint8_t bus_num) { SMMUPciBus *smmu_pci_bus = s->smmu_pcibus_by_bus_num[bus_num]; + GHashTableIter iter; - if (!smmu_pci_bus) { - GHashTableIter iter; - - g_hash_table_iter_init(&iter, s->smmu_pcibus_by_busptr); - while (g_hash_table_iter_next(&iter, NULL, (void **)&smmu_pci_bus)) { - if (pci_bus_num(smmu_pci_bus->bus) == bus_num) { - s->smmu_pcibus_by_bus_num[bus_num] = smmu_pci_bus; - return smmu_pci_bus; - } - } - smmu_pci_bus = NULL; + if (smmu_pci_bus) { + return smmu_pci_bus; } - return smmu_pci_bus; + + g_hash_table_iter_init(&iter, s->smmu_pcibus_by_busptr); + while (g_hash_table_iter_next(&iter, NULL, (void **)&smmu_pci_bus)) { + if (pci_bus_num(smmu_pci_bus->bus) == bus_num) { + s->smmu_pcibus_by_bus_num[bus_num] = smmu_pci_bus; + return smmu_pci_bus; + } + } + + return NULL; } static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As the Connex and Verdex machines only boot in little-endian, we can simplify the code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - int be; MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, be)) { + sector_len, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - int be; MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, be)) { + sector_len, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, DeviceState *mst_irq; DriveInfo *dinfo; int i; - int be; MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, memory_region_set_readonly(rom, true); memory_region_add_subregion(address_space_mem, 0, rom); -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, i ? "mainstone.flash1" : "mainstone.flash0", MAINSTONE_FLASH, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, be)) { + sector_len, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) DriveInfo *dinfo; int fl_idx; uint32_t flash_size = flash0_size; - int be; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) OMAP_CS2_BASE, &cs[3]); fl_idx = 0; -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif - if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, be)) { + sector_size, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS1_BASE, "omap_sx1.flash1-1", flash1_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, be)) { + sector_size, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; - int be; void *z2_lcd; I2CBus *bus; DeviceState *wm; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) /* Setup CPU & memory */ mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, be)) { + sector_len, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) * 0xFF800000 (if there is 8 MB flash). So remap flash access if the * image is smaller than 32 MB. */ -#ifdef TARGET_WORDS_BIGENDIAN - pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, - "musicpal.flash", flash_size, - blk, 0x10000, - MP_FLASH_SIZE_MAX / flash_size, - 2, 0x00BF, 0x236D, 0x0000, 0x0000, - 0x5555, 0x2AAA, 1); -#else pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, blk, 0x10000, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -#endif - } sysbus_create_simple(TYPE_MV88W8618_FLASHCFG, MP_FLASHCFG_BASE, NULL); -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-3-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_init(Object *obj) s->last_rtcpicr = 0; s->last_hz = s->last_sw = s->last_pi = qemu_clock_get_ms(rtc_clock); + sysbus_init_irq(dev, &s->rtc_irq); + + memory_region_init_io(&s->iomem, obj, &pxa2xx_rtc_ops, s, + "pxa2xx-rtc", 0x10000); + sysbus_init_mmio(dev, &s->iomem); +} + +static void pxa2xx_rtc_realize(DeviceState *dev, Error **errp) +{ + PXA2xxRTCState *s = PXA2XX_RTC(dev); s->rtc_hz = timer_new_ms(rtc_clock, pxa2xx_rtc_hz_tick, s); s->rtc_rdal1 = timer_new_ms(rtc_clock, pxa2xx_rtc_rdal1_tick, s); s->rtc_rdal2 = timer_new_ms(rtc_clock, pxa2xx_rtc_rdal2_tick, s); s->rtc_swal1 = timer_new_ms(rtc_clock, pxa2xx_rtc_swal1_tick, s); s->rtc_swal2 = timer_new_ms(rtc_clock, pxa2xx_rtc_swal2_tick, s); s->rtc_pi = timer_new_ms(rtc_clock, pxa2xx_rtc_pi_tick, s); - - sysbus_init_irq(dev, &s->rtc_irq); - - memory_region_init_io(&s->iomem, obj, &pxa2xx_rtc_ops, s, - "pxa2xx-rtc", 0x10000); - sysbus_init_mmio(dev, &s->iomem); } static int pxa2xx_rtc_pre_save(void *opaque) @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_sysbus_class_init(ObjectClass *klass, void *data) dc->desc = "PXA2xx RTC Controller"; dc->vmsd = &vmstate_pxa2xx_rtc_regs; + dc->realize = pxa2xx_rtc_realize; } static const TypeInfo pxa2xx_rtc_sysbus_info = { -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-4-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/spitz.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_init(Object *obj) spitz_keyboard_pre_map(s); - s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); } +static void spitz_keyboard_realize(DeviceState *dev, Error **errp) +{ + SpitzKeyboardState *s = SPITZ_KEYBOARD(dev); + s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); +} + /* LCD backlight controller */ #define LCDTG_RESCTL 0x00 @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_spitz_kbd; + dc->realize = spitz_keyboard_realize; } static const TypeInfo spitz_keyboard_info = { -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-5-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/strongarm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_init(Object *obj) s->last_rcnr = (uint32_t) mktimegm(&tm); s->last_hz = qemu_clock_get_ms(rtc_clock); - s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); - s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); - sysbus_init_irq(dev, &s->rtc_irq); sysbus_init_irq(dev, &s->rtc_hz_irq); @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void strongarm_rtc_realize(DeviceState *dev, Error **errp) +{ + StrongARMRTCState *s = STRONGARM_RTC(dev); + s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); + s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); +} + static int strongarm_rtc_pre_save(void *opaque) { StrongARMRTCState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data) dc->desc = "StrongARM RTC Controller"; dc->vmsd = &vmstate_strongarm_rtc_regs; + dc->realize = strongarm_rtc_realize; } static const TypeInfo strongarm_rtc_sysbus_info = { @@ -XXX,XX +XXX,XX @@ static void strongarm_uart_init(Object *obj) "uart", 0x10000); sysbus_init_mmio(dev, &s->iomem); sysbus_init_irq(dev, &s->irq); - - s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_rx_to, s); - s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); } static void strongarm_uart_realize(DeviceState *dev, Error **errp) { StrongARMUARTState *s = STRONGARM_UART(dev); + s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + strongarm_uart_rx_to, + s); + s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); qemu_chr_fe_set_handlers(&s->chr, strongarm_uart_can_receive, strongarm_uart_receive, -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200227025055.14341-7-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/cadence_ttc.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/timer/cadence_ttc.c b/hw/timer/cadence_ttc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cadence_ttc.c +++ b/hw/timer/cadence_ttc.c @@ -XXX,XX +XXX,XX @@ static void cadence_timer_init(uint32_t freq, CadenceTimerState *s) static void cadence_ttc_init(Object *obj) { CadenceTTCState *s = CADENCE_TTC(obj); - int i; - - for (i = 0; i < 3; ++i) { - cadence_timer_init(133000000, &s->timer[i]); - sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->timer[i].irq); - } memory_region_init_io(&s->iomem, obj, &cadence_ttc_ops, s, "timer", 0x1000); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void cadence_ttc_realize(DeviceState *dev, Error **errp) +{ + CadenceTTCState *s = CADENCE_TTC(dev); + int i; + + for (i = 0; i < 3; ++i) { + cadence_timer_init(133000000, &s->timer[i]); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->timer[i].irq); + } +} + static int cadence_timer_pre_save(void *opaque) { cadence_timer_sync((CadenceTimerState *)opaque); @@ -XXX,XX +XXX,XX @@ static void cadence_ttc_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_cadence_ttc; + dc->realize = cadence_ttc_realize; } static const TypeInfo cadence_ttc_info = { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Don't merely start with v8.0, handle v7VE as well. Ensure that writes from aarch32 mode do not change bits in the other half of the register. Protect reads of aa64 id registers with ARM_FEATURE_AARCH64. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 38 +++++++++++++++++++++++++------------- 1 file changed, 25 insertions(+), 13 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { REGINFO_SENTINEL }; -static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) +static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) { ARMCPU *cpu = env_archcpu(env); - /* Begin with bits defined in base ARMv8.0. */ - uint64_t valid_mask = MAKE_64BIT_MASK(0, 34); + + if (arm_feature(env, ARM_FEATURE_V8)) { + valid_mask |= MAKE_64BIT_MASK(0, 34); /* ARMv8.0 */ + } else { + valid_mask |= MAKE_64BIT_MASK(0, 28); /* ARMv7VE */ + } if (arm_feature(env, ARM_FEATURE_EL3)) { valid_mask &= ~HCR_HCD; @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) */ valid_mask &= ~HCR_TSC; } - if (cpu_isar_feature(aa64_vh, cpu)) { - valid_mask |= HCR_E2H; - } - if (cpu_isar_feature(aa64_lor, cpu)) { - valid_mask |= HCR_TLOR; - } - if (cpu_isar_feature(aa64_pauth, cpu)) { - valid_mask |= HCR_API | HCR_APK; + + if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (cpu_isar_feature(aa64_vh, cpu)) { + valid_mask |= HCR_E2H; + } + if (cpu_isar_feature(aa64_lor, cpu)) { + valid_mask |= HCR_TLOR; + } + if (cpu_isar_feature(aa64_pauth, cpu)) { + valid_mask |= HCR_API | HCR_APK; + } } /* Clear RES0 bits. */ @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) arm_cpu_update_vfiq(cpu); } +static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) +{ + do_hcr_write(env, value, 0); +} + static void hcr_writehigh(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { /* Handle HCR2 write, i.e. write to high half of HCR_EL2 */ value = deposit64(env->cp15.hcr_el2, 32, 32, value); - hcr_write(env, NULL, value); + do_hcr_write(env, value, MAKE_64BIT_MASK(0, 32)); } static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, { /* Handle HCR write, i.e. write to low half of HCR_EL2 */ value = deposit64(env->cp15.hcr_el2, 0, 32, value); - hcr_write(env, NULL, value); + do_hcr_write(env, value, MAKE_64BIT_MASK(32, 32)); } /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_TERR (1ULL << 36) #define HCR_TEA (1ULL << 37) #define HCR_MIOCNCE (1ULL << 38) +/* RES0 bit 39 */ #define HCR_APK (1ULL << 40) #define HCR_API (1ULL << 41) #define HCR_NV (1ULL << 42) @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_NV2 (1ULL << 45) #define HCR_FWB (1ULL << 46) #define HCR_FIEN (1ULL << 47) +/* RES0 bit 48 */ #define HCR_TID4 (1ULL << 49) #define HCR_TICAB (1ULL << 50) +#define HCR_AMVOFFEN (1ULL << 51) #define HCR_TOCU (1ULL << 52) +#define HCR_ENSCXT (1ULL << 53) #define HCR_TTLBIS (1ULL << 54) #define HCR_TTLBOS (1ULL << 55) #define HCR_ATA (1ULL << 56) #define HCR_DCT (1ULL << 57) +#define HCR_TID5 (1ULL << 58) +#define HCR_TWEDEN (1ULL << 59) +#define HCR_TWEDEL MAKE_64BIT_MASK(60, 4) #define SCR_NS (1U << 0) #define SCR_IRQ (1U << 1) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In arm_cpu_reset, we configure many system registers so that user-only behaves as it should with a minimum of ifdefs. However, we do not set all of the system registers as required for a cpu with EL2 and EL3. Disabling EL2 and EL3 mean that we will not look at those registers, which means that we don't have to worry about configuring them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_reset_hivecs_property = static Property arm_cpu_rvbar_property = DEFINE_PROP_UINT64("rvbar", ARMCPU, rvbar, 0); +#ifndef CONFIG_USER_ONLY static Property arm_cpu_has_el2_property = DEFINE_PROP_BOOL("has_el2", ARMCPU, has_el2, true); static Property arm_cpu_has_el3_property = DEFINE_PROP_BOOL("has_el3", ARMCPU, has_el3, true); +#endif static Property arm_cpu_cfgend_property = DEFINE_PROP_BOOL("cfgend", ARMCPU, cfgend, false); @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) qdev_property_add_static(DEVICE(obj), &arm_cpu_rvbar_property); } +#ifndef CONFIG_USER_ONLY if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { /* Add the has_el3 state CPU property only if EL3 is allowed. This will * prevent "has_el3" from existing on CPUs which cannot support EL3. */ qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el3_property); -#ifndef CONFIG_USER_ONLY object_property_add_link(obj, "secure-memory", TYPE_MEMORY_REGION, (Object **)&cpu->secure_memory, qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_STRONG, &error_abort); -#endif } if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el2_property); } +#endif if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) { cpu->has_pmu = true; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We have disabled EL2 and EL3 for user-only, which means that these registers "don't exist" and should not be set. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Enable all PAC keys. */ env->cp15.sctlr_el[1] |= (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB); - /* Enable all PAC instructions */ - env->cp15.hcr_el2 |= HCR_API; - env->cp15.scr_el3 |= SCR_API; /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3); /* and to the SVE instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); - env->cp15.cptr_el[3] |= CPTR_EZ; /* with maximum vector length */ env->vfp.zcr_el[1] = cpu_isar_feature(aa64_sve, cpu) ? cpu->sve_max_vq - 1 : 0; - env->vfp.zcr_el[2] = env->vfp.zcr_el[1]; - env->vfp.zcr_el[3] = env->vfp.zcr_el[1]; /* * Enable TBI0 and TBI1. While the real kernel only enables TBI0, * turning on both here will produce smaller code and otherwise -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Update the {TGE,E2H} == '11' masking to ARMv8.6. If EL2 is configured for aarch32, disable all of the bits that are RES0 in aarch32 mode. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint64_t arm_hcr_el2_eff(CPUARMState *env) * Since the v8.4 language applies to the entire register, and * appears to be backward compatible, use that. */ - ret = 0; - } else if (ret & HCR_TGE) { - /* These bits are up-to-date as of ARMv8.4. */ + return 0; + } + + /* + * For a cpu that supports both aarch64 and aarch32, we can set bits + * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32. + * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32. + */ + if (!arm_el_is_aa64(env, 2)) { + uint64_t aa32_valid; + + /* + * These bits are up-to-date as of ARMv8.6. + * For HCR, it's easiest to list just the 2 bits that are invalid. + * For HCR2, list those that are valid. + */ + aa32_valid = MAKE_64BIT_MASK(0, 32) & ~(HCR_RW | HCR_TDZ); + aa32_valid |= (HCR_CD | HCR_ID | HCR_TERR | HCR_TEA | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_TTLBIS); + ret &= aa32_valid; + } + + if (ret & HCR_TGE) { + /* These bits are up-to-date as of ARMv8.6. */ if (ret & HCR_E2H) { ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO | HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE | HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU | - HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE); + HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_ENSCXT | + HCR_TTLBIS | HCR_TTLBOS | HCR_TID5); } else { ret |= HCR_FMO | HCR_IMO | HCR_AMO; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits trap EL1 access to various virtual memory controls. Buglink: https://bugs.launchpad.net/bugs/1855072 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 82 ++++++++++++++++++++++++++++++--------------- 1 file changed, 55 insertions(+), 27 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ +static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1) { + uint64_t trap = isread ? HCR_TRVM : HCR_TVM; + if (arm_hcr_el2_eff(env) & trap) { + return CP_ACCESS_TRAP_EL2; + } + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { */ { .name = "CONTEXTIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL1_RW, .secure = ARM_CP_SECSTATE_NS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .secure = ARM_CP_SECSTATE_NS, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, { .name = "CONTEXTIDR_S", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .secure = ARM_CP_SECSTATE_S, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_s), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, REGINFO_SENTINEL @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = CP_ANY, .crn = 3, .crm = CP_ANY, .opc2 = CP_ANY, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5, .access = PL0_W, .type = ARM_CP_NOP }, { .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), offsetof(CPUARMState, cp15.ifar_ns) }, .resetvalue = 0, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { */ { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* MAIR can just read-as-written because we don't implement caches * and so don't need to care about memory attributes. */ { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), + .access = PL1_RW, .accessfn = access_tvm_trvm, + .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), .resetvalue = 0 }, { .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { * handled in the field definitions. */ { .name = "MAIR0", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, .access = PL1_RW, + .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s), offsetof(CPUARMState, cp15.mair0_ns) }, .resetfn = arm_cp_reset_ignore }, { .name = "MAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, .access = PL1_RW, + .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s), offsetof(CPUARMState, cp15.mair1_ns) }, .resetfn = arm_cp_reset_ignore }, @@ -XXX,XX +XXX,XX @@ static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_ALIAS, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s), offsetoflow32(CPUARMState, cp15.dfsr_ns) }, }, { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s), offsetoflow32(CPUARMState, cp15.ifsr_ns) } }, { .name = "DFAR", .cp = 15, .opc1 = 0, .crn = 6, .crm = 0, .opc2 = 0, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.dfar_s), offsetof(CPUARMState, cp15.dfar_ns) } }, { .name = "FAR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), + .access = PL1_RW, .accessfn = access_tvm_trvm, + .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), .resetvalue = 0, }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { static const ARMCPRegInfo vmsa_cp_reginfo[] = { { .name = "ESR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, }, { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0, - .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) } }, { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1, - .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) } }, { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, .writefn = vmsa_tcr_el12_write, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_tcr_el12_write, .resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) }, { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, .raw_writefn = vmsa_ttbcr_raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]), offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { */ static const ARMCPRegInfo ttbcr2_reginfo = { .name = "TTBCR2", .cp = 15, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_ALIAS, .bank_fieldoffsets = { offsetofhigh32(CPUARMState, cp15.tcr_el[3]), offsetofhigh32(CPUARMState, cp15.tcr_el[1]) }, }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lpae_cp_reginfo[] = { /* NOP AMAIR0/1 */ { .name = "AMAIR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* AMAIR1 is mapped to AMAIR_EL1[63:32] */ { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0, .access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s), offsetof(CPUARMState, cp15.par_ns)} }, { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0, - .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_64BIT | ARM_CP_ALIAS, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) }, .writefn = vmsa_ttbr_write, }, { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1, - .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_64BIT | ARM_CP_ALIAS, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) }, .writefn = vmsa_ttbr_write, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .type = ARM_CP_NOP, .access = PL1_W }, /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo sctlr = { .name = "SCTLR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), offsetof(CPUARMState, cp15.sctlr_ns) }, .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits trap EL1 access to set/way cache maintenance insns. Buglink: https://bugs.launchpad.net/bugs/1863685 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TSW. */ +static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TSW)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_W, .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, .accessfn = aa64_cacheop_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to the auxiliary control registers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TACR. */ +static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TACR)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ats1cp_reginfo[] = { static const ARMCPRegInfo actlr2_hactlr2_reginfo[] = { { .name = "ACTLR2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tacr, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "HACTLR2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 3, .access = PL2_RW, .type = ARM_CP_CONST, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo auxcr_reginfo[] = { { .name = "ACTLR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = cpu->reset_auxcr }, + .access = PL1_RW, .accessfn = access_tacr, + .type = ARM_CP_CONST, .resetvalue = cpu->reset_auxcr }, { .name = "ACTLR_EL2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 1, .access = PL2_RW, .type = ARM_CP_CONST, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to cache maintenance insns that operate to the point of coherency or persistence. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 39 +++++++++++++++++++++++++++++++-------- 1 file changed, 31 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_access(CPUARMState *env, return CP_ACCESS_OK; } +static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* Cache invalidate/clean to Point of Coherency or Persistence... */ + switch (arm_current_el(env)) { + case 0: + /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { + return CP_ACCESS_TRAP; + } + /* fall through */ + case 1: + /* ... EL1 must trap to EL2 if HCR_EL2.TPCP is set. */ + if (arm_hcr_el2_eff(env) & HCR_TPCP) { + return CP_ACCESS_TRAP_EL2; + } + break; + } + return CP_ACCESS_OK; +} + /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_access }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = aa64_cacheop_poc_access, + .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, /* MMU Domain access control / MPU write buffer control */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpop_reg[] = { { .name = "DC_CVAP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, - .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpodp_reg[] = { { .name = "DC_CVADP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, - .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, REGINFO_SENTINEL }; #endif /*CONFIG_USER_ONLY*/ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to cache maintenance insns that operate to the point of unification. There are no longer any references to plain aa64_cacheop_access, so remove it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 53 +++++++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo uao_reginfo = { .readfn = aa64_uao_read, .writefn = aa64_uao_write }; -static CPAccessResult aa64_cacheop_access(CPUARMState *env, - const ARMCPRegInfo *ri, - bool isread) -{ - /* Cache invalidate/clean: NOP, but EL0 must UNDEF unless - * SCTLR_EL1.UCI is set. - */ - if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UCI)) { - return CP_ACCESS_TRAP; - } - return CP_ACCESS_OK; -} - static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, return CP_ACCESS_OK; } +static CPAccessResult aa64_cacheop_pou_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* Cache invalidate/clean to Point of Unification... */ + switch (arm_current_el(env)) { + case 0: + /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { + return CP_ACCESS_TRAP; + } + /* fall through */ + case 1: + /* ... EL1 must trap to EL2 if HCR_EL2.TPU is set. */ + if (arm_hcr_el2_eff(env) & HCR_TPU) { + return CP_ACCESS_TRAP_EL2; + } + break; + } + return CP_ACCESS_OK; +} + /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { /* Cache ops: all NOPs since we don't emulate caches */ { .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .type = ARM_CP_NOP, + .accessfn = aa64_cacheop_pou_access }, { .name = "IC_IALLU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .type = ARM_CP_NOP, + .accessfn = aa64_cacheop_pou_access }, { .name = "IC_IVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_pou_access }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .access = PL1_W, .accessfn = aa64_cacheop_poc_access, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_pou_access }, { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .writefn = tlbiipas2_is_write }, /* 32 bit cache operations */ { .name = "ICIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "BPIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "ICIALLU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "ICIMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "BPIALL", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to tlb maintenance insns. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 85 +++++++++++++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 30 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TTLB. */ +static CPAccessResult access_ttlb(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TTLB)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .type = ARM_CP_NO_RAW, .access = PL1_R, .readfn = isr_read }, /* 32 bit ITLB invalidates */ { .name = "ITLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "ITLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "ITLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, /* 32 bit DTLB invalidates */ { .name = "DTLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "DTLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "DTLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, /* 32 bit TLB invalidates */ { .name = "TLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "TLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "TLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, { .name = "TLBIMVAA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimvaa_write }, REGINFO_SENTINEL }; static const ARMCPRegInfo v7mp_cp_reginfo[] = { /* 32 bit TLB invalidates, Inner Shareable */ { .name = "TLBIALLIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_is_write }, { .name = "TLBIMVAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_is_write }, { .name = "TLBIASIDIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbiasid_is_write }, { .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { #endif /* TLB invalidate last level of translation table walk */ { .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_is_write }, { .name = "TLBIMVAALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, { .name = "TLBIMVAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "TLBIMVAAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimvaa_write }, { .name = "TLBIMVALH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, .type = ARM_CP_NO_RAW, .access = PL2_W, .writefn = tlbimva_hyp_write }, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Make the output just a bit prettier when running by hand. Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pauth-1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/tcg/aarch64/pauth-1.c b/tests/tcg/aarch64/pauth-1.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/pauth-1.c +++ b/tests/tcg/aarch64/pauth-1.c @@ -XXX,XX +XXX,XX @@ int main() } perc = (float) count / (float) (TESTS * 2); - printf("Ptr Check: %0.2f%%", perc * 100.0); + printf("Ptr Check: %0.2f%%\n", perc * 100.0); assert(perc > 0.95); return 0; } -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard is a singleboard computer with an Allwinner A10 System-on-Chip [1]. As documented in the Allwinner A10 User Manual V1.5 [2], the SoC has an ARM Cortex-A8 processor. Currently the Cubieboard machine definition specifies the ARM Cortex-A9 in its description and as the default CPU. This patch corrects the Cubieboard machine definition to use the ARM Cortex-A8. The only user-visible effect is that our textual description of the machine was wrong, because hw/arm/allwinner-a10.c always creates a Cortex-A8 CPU regardless of the default value in the MachineClass struct. [1] http://docs.cubieboard.org/products/start#cubieboard1 [2] https://linux-sunxi.org/File:Allwinner_A10_User_manual_V1.5.pdf Fixes: 8a863c8120994981a099 Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-2-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [note in commit message that the bug didn't have much visible effect] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) static void cubieboard_machine_init(MachineClass *mc) { - mc->desc = "cubietech cubieboard (Cortex-A9)"; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); + mc->desc = "cubietech cubieboard (Cortex-A8)"; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); mc->init = cubieboard_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard has an ARM Cortex-A8. Instead of simply ignoring a bogus -cpu option provided by the user, give them an error message so they know their command line is wrong. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-3-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info cubieboard_binfo = { static void cubieboard_init(MachineState *machine) { - AwA10State *a10 = AW_A10(object_new(TYPE_AW_A10)); + AwA10State *a10; Error *err = NULL; + /* Only allow Cortex-A8 for this board */ + if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a8")) != 0) { + error_report("This board can only be used with cortex-a8 CPU"); + exit(1); + } + + a10 = AW_A10(object_new(TYPE_AW_A10)); + object_property_set_int(OBJECT(&a10->emac), 1, "phy-addr", &err); if (err != NULL) { error_reportf_err(err, "Couldn't set phy address: "); -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard contains either 512MiB or 1GiB of onboard RAM [1]. Prevent changing RAM to a different size which could break user programs. [1] http://linux-sunxi.org/Cubieboard Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-4-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) AwA10State *a10; Error *err = NULL; + /* This board has fixed size RAM (512MiB or 1GiB) */ + if (machine->ram_size != 512 * MiB && + machine->ram_size != 1 * GiB) { + error_report("This machine can only be used with 512MiB or 1GiB RAM"); + exit(1); + } + /* Only allow Cortex-A8 for this board */ if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a8")) != 0) { error_report("This board can only be used with cortex-a8 CPU"); @@ -XXX,XX +XXX,XX @@ static void cubieboard_machine_init(MachineClass *mc) { mc->desc = "cubietech cubieboard (Cortex-A8)"; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); + mc->default_ram_size = 1 * GiB; mc->init = cubieboard_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard machine does not support the -bios argument. Report an error when -bios is used and exit immediately. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-5-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "qapi/error.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/sysbus.h" #include "hw/boards.h" #include "hw/arm/allwinner-a10.h" @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) AwA10State *a10; Error *err = NULL; + /* BIOS is not supported by this board */ + if (bios_name) { + error_report("BIOS not supported for this machine"); + exit(1); + } + /* This board has fixed size RAM (512MiB or 1GiB) */ if (machine->ram_size != 512 * MiB && machine->ram_size != 1 * GiB) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Replicate the single TBI bit from TCR_EL2 and TCR_EL3 so that we can unconditionally use pointer bit 55 to index into our composite TBI1:TBI0 field. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx) } else if (mmu_idx == ARMMMUIdx_Stage2) { return 0; /* VTCR_EL2 */ } else { - return extract32(tcr, 20, 1); + /* Replicate the single TBI bit so we always have 2 bits. */ + return extract32(tcr, 20, 1) * 3; } } @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx) } else if (mmu_idx == ARMMMUIdx_Stage2) { return 0; /* VTCR_EL2 */ } else { - return extract32(tcr, 29, 1); + /* Replicate the single TBID bit so we always have 2 bits. */ + return extract32(tcr, 29, 1) * 3; } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We now cache the core mmu_idx in env->hflags. Rather than recompute from scratch, extract the field. All of the uses of cpu_mmu_index within target/arm are within helpers, and env->hflags is always stable within a translation block from whence helpers are called. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 23 +++++++++++++---------- target/arm/helper.c | 5 ----- 2 files changed, 13 insertions(+), 15 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { #define MMU_USER_IDX 0 -/** - * cpu_mmu_index: - * @env: The cpu environment - * @ifetch: True for code access, false for data access. - * - * Return the core mmu index for the current translation regime. - * This function is used by generic TCG code paths. - */ -int cpu_mmu_index(CPUARMState *env, bool ifetch); - /* Indexes used when registering address spaces with cpu_address_space_init */ typedef enum ARMASIdx { ARMASIdx_NS = 0, @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */ FIELD(TBFLAG_A64, TBID, 12, 2) FIELD(TBFLAG_A64, UNPRIV, 14, 1) +/** + * cpu_mmu_index: + * @env: The cpu environment + * @ifetch: True for code access, false for data access. + * + * Return the core mmu index for the current translation regime. + * This function is used by generic TCG code paths. + */ +static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) +{ + return FIELD_EX32(env->hflags, TBFLAG_ANY, MMUIDX); +} + static inline bool bswap_code(bool sctlr_b) { #ifdef CONFIG_USER_ONLY diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_mmu_idx(CPUARMState *env) return arm_mmu_idx_el(env, arm_current_el(env)); } -int cpu_mmu_index(CPUARMState *env, bool ifetch) -{ - return arm_to_core_mmu_idx(arm_mmu_idx(env)); -} - #ifndef CONFIG_USER_ONLY ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> If by context we know that we're in AArch64 mode, we need not test for M-profile when reconstructing the full ARMMMUIdx. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/translate-a64.c | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) } } +static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) +{ + /* AArch64 is always a-profile. */ + return mmu_idx | ARM_MMU_IDX_A; +} + int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->condexec_mask = 0; dc->condexec_cond = 0; core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX); - dc->mmu_idx = core_to_arm_mmu_idx(env, core_mmu_idx); + dc->mmu_idx = core_to_aa64_mmu_idx(core_mmu_idx); dc->tbii = FIELD_EX32(tb_flags, TBFLAG_A64, TBII); dc->tbid = FIELD_EX32(tb_flags, TBFLAG_A64, TBID); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We missed this case within AArch64.ExceptionReturn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) "AArch32 EL%d PC 0x%" PRIx32 "\n", cur_el, new_el, env->regs[15]); } else { + int tbii; + env->aarch64 = 1; spsr &= aarch64_pstate_valid_mask(&env_archcpu(env)->isar); pstate_write(env, spsr); @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) env->pstate &= ~PSTATE_SS; } aarch64_restore_sp(env, new_el); - env->pc = new_pc; helper_rebuild_hflags_a64(env, new_el); + + /* + * Apply TBI to the exception return address. We had to delay this + * until after we selected the new EL, so that we could select the + * correct TBI+TBID bits. This is made easier by waiting until after + * the hflags rebuild, since we can pull the composite TBII field + * from there. + */ + tbii = FIELD_EX32(env->hflags, TBFLAG_A64, TBII); + if ((tbii >> extract64(new_pc, 55, 1)) & 1) { + /* TBI is enabled. */ + int core_mmu_idx = cpu_mmu_index(env, false); + if (regime_has_2_ranges(core_to_aa64_mmu_idx(core_mmu_idx))) { + new_pc = sextract64(new_pc, 0, 56); + } else { + new_pc = extract64(new_pc, 0, 56); + } + } + env->pc = new_pc; + qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch64 EL%d PC 0x%" PRIx64 "\n", cur_el, new_el, env->pc); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is an aarch64-only function. Move it out of the shared file. This patch is code movement only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 1 + target/arm/helper.h | 1 - target/arm/helper-a64.c | 91 ++++++++++++++++++++++++++++++++++++++++ target/arm/op_helper.c | 93 ----------------------------------------- 4 files changed, 92 insertions(+), 94 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) DEF_HELPER_2(exception_return, void, env, i64) +DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) -DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "cpu.h" #include "exec/gdbstub.h" #include "exec/helper-proto.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sqrt_f16)(uint32_t a, void *fpstp) return float16_sqrt(a, s); } +void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) +{ + /* + * Implement DC ZVA, which zeroes a fixed-length block of memory. + * Note that we do not implement the (architecturally mandated) + * alignment fault for attempts to use this on Device memory + * (which matches the usual QEMU behaviour of not implementing either + * alignment faults or any memory attribute handling). + */ + ARMCPU *cpu = env_archcpu(env); + uint64_t blocklen = 4 << cpu->dcz_blocksize; + uint64_t vaddr = vaddr_in & ~(blocklen - 1); + +#ifndef CONFIG_USER_ONLY + { + /* + * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than + * the block size so we might have to do more than one TLB lookup. + * We know that in fact for any v8 CPU the page size is at least 4K + * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only + * 1K as an artefact of legacy v5 subpage support being present in the + * same QEMU executable. So in practice the hostaddr[] array has + * two entries, given the current setting of TARGET_PAGE_BITS_MIN. + */ + int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); + void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; + int try, i; + unsigned mmu_idx = cpu_mmu_index(env, false); + TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); + + assert(maxidx <= ARRAY_SIZE(hostaddr)); + + for (try = 0; try < 2; try++) { + + for (i = 0; i < maxidx; i++) { + hostaddr[i] = tlb_vaddr_to_host(env, + vaddr + TARGET_PAGE_SIZE * i, + 1, mmu_idx); + if (!hostaddr[i]) { + break; + } + } + if (i == maxidx) { + /* + * If it's all in the TLB it's fair game for just writing to; + * we know we don't need to update dirty status, etc. + */ + for (i = 0; i < maxidx - 1; i++) { + memset(hostaddr[i], 0, TARGET_PAGE_SIZE); + } + memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); + return; + } + /* + * OK, try a store and see if we can populate the tlb. This + * might cause an exception if the memory isn't writable, + * in which case we will longjmp out of here. We must for + * this purpose use the actual register value passed to us + * so that we get the fault address right. + */ + helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); + /* Now we can populate the other TLB entries, if any */ + for (i = 0; i < maxidx; i++) { + uint64_t va = vaddr + TARGET_PAGE_SIZE * i; + if (va != (vaddr_in & TARGET_PAGE_MASK)) { + helper_ret_stb_mmu(env, va, 0, oi, GETPC()); + } + } + } + + /* + * Slow path (probably attempt to do this to an I/O device or + * similar, or clearing of a block of code we have translations + * cached for). Just do a series of byte writes as the architecture + * demands. It's not worth trying to use a cpu_physical_memory_map(), + * memset(), unmap() sequence here because: + * + we'd need to account for the blocksize being larger than a page + * + the direct-RAM access case is almost always going to be dealt + * with in the fastpath code above, so there's no speed benefit + * + we would have to deal with the map returning NULL because the + * bounce buffer was in use + */ + for (i = 0; i < blocklen; i++) { + helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); + } + } +#else + memset(g2h(vaddr), 0, blocklen); +#endif +} diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ * License along with this library; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" -#include "qemu/units.h" #include "qemu/log.h" #include "qemu/main-loop.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(ror_cc)(CPUARMState *env, uint32_t x, uint32_t i) return ((uint32_t)x >> shift) | (x << (32 - shift)); } } - -void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) -{ - /* - * Implement DC ZVA, which zeroes a fixed-length block of memory. - * Note that we do not implement the (architecturally mandated) - * alignment fault for attempts to use this on Device memory - * (which matches the usual QEMU behaviour of not implementing either - * alignment faults or any memory attribute handling). - */ - - ARMCPU *cpu = env_archcpu(env); - uint64_t blocklen = 4 << cpu->dcz_blocksize; - uint64_t vaddr = vaddr_in & ~(blocklen - 1); - -#ifndef CONFIG_USER_ONLY - { - /* - * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than - * the block size so we might have to do more than one TLB lookup. - * We know that in fact for any v8 CPU the page size is at least 4K - * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only - * 1K as an artefact of legacy v5 subpage support being present in the - * same QEMU executable. So in practice the hostaddr[] array has - * two entries, given the current setting of TARGET_PAGE_BITS_MIN. - */ - int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); - void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; - int try, i; - unsigned mmu_idx = cpu_mmu_index(env, false); - TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); - - assert(maxidx <= ARRAY_SIZE(hostaddr)); - - for (try = 0; try < 2; try++) { - - for (i = 0; i < maxidx; i++) { - hostaddr[i] = tlb_vaddr_to_host(env, - vaddr + TARGET_PAGE_SIZE * i, - 1, mmu_idx); - if (!hostaddr[i]) { - break; - } - } - if (i == maxidx) { - /* - * If it's all in the TLB it's fair game for just writing to; - * we know we don't need to update dirty status, etc. - */ - for (i = 0; i < maxidx - 1; i++) { - memset(hostaddr[i], 0, TARGET_PAGE_SIZE); - } - memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); - return; - } - /* - * OK, try a store and see if we can populate the tlb. This - * might cause an exception if the memory isn't writable, - * in which case we will longjmp out of here. We must for - * this purpose use the actual register value passed to us - * so that we get the fault address right. - */ - helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); - /* Now we can populate the other TLB entries, if any */ - for (i = 0; i < maxidx; i++) { - uint64_t va = vaddr + TARGET_PAGE_SIZE * i; - if (va != (vaddr_in & TARGET_PAGE_MASK)) { - helper_ret_stb_mmu(env, va, 0, oi, GETPC()); - } - } - } - - /* - * Slow path (probably attempt to do this to an I/O device or - * similar, or clearing of a block of code we have translations - * cached for). Just do a series of byte writes as the architecture - * demands. It's not worth trying to use a cpu_physical_memory_map(), - * memset(), unmap() sequence here because: - * + we'd need to account for the blocksize being larger than a page - * + the direct-RAM access case is almost always going to be dealt - * with in the fastpath code above, so there's no speed benefit - * + we would have to deal with the map returning NULL because the - * bounce buffer was in use - */ - for (i = 0; i < blocklen; i++) { - helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); - } - } -#else - memset(g2h(vaddr), 0, blocklen); -#endif -} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The function does not write registers, and only reads them by implication via the exception path. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) DEF_HELPER_2(exception_return, void, env, i64) -DEF_HELPER_2(dc_zva, void, env, i64) +DEF_HELPER_FLAGS_2(dc_zva, TCG_CALL_NO_WG, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This data access was forgotten when we added support for cleaning addresses of TBI information. Fixes: 3a471103ac1823ba Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200302175829.2183-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, return; case ARM_CP_DC_ZVA: /* Writes clear the aligned block of memory which rt points into. */ - tcg_rt = cpu_reg(s, rt); + tcg_rt = clean_data_tbi(s, cpu_reg(s, rt)); gen_helper_dc_zva(cpu_env, tcg_rt); return; default: -- 2.20.1 I don't have anything else queued up at the moment, so this is just Richard's SME patches. -- PMM The following changes since commit 63b38f6c85acd312c2cab68554abf33adf4ee2b3: Merge tag 'pull-target-arm-20220707' of https://git.linaro.org/people/pmaydell/qemu-arm into staging (2022-07-08 06:17:11 +0530) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220711 for you to fetch changes up to f9982ceaf26df27d15547a3a7990a95019e9e3a8: linux-user/aarch64: Add SME related hwcap entries (2022-07-11 13:43:52 +0100) ---------------------------------------------------------------- target-arm: * Implement SME emulation, for both system and linux-user ---------------------------------------------------------------- Richard Henderson (45): target/arm: Handle SME in aarch64_cpu_dump_state target/arm: Add infrastructure for disas_sme target/arm: Trap non-streaming usage when Streaming SVE is active target/arm: Mark ADR as non-streaming target/arm: Mark RDFFR, WRFFR, SETFFR as non-streaming target/arm: Mark BDEP, BEXT, BGRP, COMPACT, FEXPA, FTSSEL as non-streaming target/arm: Mark PMULL, FMMLA as non-streaming target/arm: Mark FTSMUL, FTMAD, FADDA as non-streaming target/arm: Mark SMMLA, UMMLA, USMMLA as non-streaming target/arm: Mark string/histo/crypto as non-streaming target/arm: Mark gather/scatter load/store as non-streaming target/arm: Mark gather prefetch as non-streaming target/arm: Mark LDFF1 and LDNF1 as non-streaming target/arm: Mark LD1RO as non-streaming target/arm: Add SME enablement checks target/arm: Handle SME in sve_access_check target/arm: Implement SME RDSVL, ADDSVL, ADDSPL target/arm: Implement SME ZERO target/arm: Implement SME MOVA target/arm: Implement SME LD1, ST1 target/arm: Export unpredicated ld/st from translate-sve.c target/arm: Implement SME LDR, STR target/arm: Implement SME ADDHA, ADDVA target/arm: Implement FMOPA, FMOPS (non-widening) target/arm: Implement BFMOPA, BFMOPS target/arm: Implement FMOPA, FMOPS (widening) target/arm: Implement SME integer outer product target/arm: Implement PSEL target/arm: Implement REVD target/arm: Implement SCLAMP, UCLAMP target/arm: Reset streaming sve state on exception boundaries target/arm: Enable SME for -cpu max linux-user/aarch64: Clear tpidr2_el0 if CLONE_SETTLS linux-user/aarch64: Reset PSTATE.SM on syscalls linux-user/aarch64: Add SM bit to SVE signal context linux-user/aarch64: Tidy target_restore_sigframe error return linux-user/aarch64: Do not allow duplicate or short sve records linux-user/aarch64: Verify extra record lock succeeded linux-user/aarch64: Move sve record checks into restore linux-user/aarch64: Implement SME signal handling linux-user: Rename sve prctls linux-user/aarch64: Implement PR_SME_GET_VL, PR_SME_SET_VL target/arm: Only set ZEN in reset if SVE present target/arm: Enable SME for user-only linux-user/aarch64: Add SME related hwcap entries docs/system/arm/emulation.rst | 4 + linux-user/aarch64/target_cpu.h | 5 +- linux-user/aarch64/target_prctl.h | 62 +- target/arm/cpu.h | 7 + target/arm/helper-sme.h | 126 ++++ target/arm/helper-sve.h | 4 + target/arm/helper.h | 18 + target/arm/translate-a64.h | 45 ++ target/arm/translate.h | 16 + target/arm/sme-fa64.decode | 60 ++ target/arm/sme.decode | 88 +++ target/arm/sve.decode | 41 +- linux-user/aarch64/cpu_loop.c | 9 + linux-user/aarch64/signal.c | 243 ++++++-- linux-user/elfload.c | 20 + linux-user/syscall.c | 28 +- target/arm/cpu.c | 35 +- target/arm/cpu64.c | 11 + target/arm/helper.c | 56 +- target/arm/sme_helper.c | 1140 +++++++++++++++++++++++++++++++++++++ target/arm/sve_helper.c | 28 + target/arm/translate-a64.c | 103 +++- target/arm/translate-sme.c | 373 ++++++++++++ target/arm/translate-sve.c | 393 ++++++++++--- target/arm/translate-vfp.c | 12 + target/arm/translate.c | 2 + target/arm/vec_helper.c | 24 + target/arm/meson.build | 3 + 28 files changed, 2821 insertions(+), 135 deletions(-) create mode 100644 target/arm/sme-fa64.decode create mode 100644 target/arm/sme.decode create mode 100644 target/arm/translate-sme.c From: Richard Henderson <richard.henderson@linaro.org> Dump SVCR, plus use the correct access check for Streaming Mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) int i; int el = arm_current_el(env); const char *ns_status; + bool sve; qemu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); for (i = 0; i < 32; i++) { @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) el, psr & PSTATE_SP ? 'h' : 't'); + if (cpu_isar_feature(aa64_sme, cpu)) { + qemu_fprintf(f, " SVCR=%08" PRIx64 " %c%c", + env->svcr, + (FIELD_EX64(env->svcr, SVCR, ZA) ? 'Z' : '-'), + (FIELD_EX64(env->svcr, SVCR, SM) ? 'S' : '-')); + } if (cpu_isar_feature(aa64_bti, cpu)) { qemu_fprintf(f, " BTYPE=%d", (psr & PSTATE_BTYPE) >> 10); } @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) qemu_fprintf(f, " FPCR=%08x FPSR=%08x\n", vfp_get_fpcr(env), vfp_get_fpsr(env)); - if (cpu_isar_feature(aa64_sve, cpu) && sve_exception_el(env, el) == 0) { + if (cpu_isar_feature(aa64_sme, cpu) && FIELD_EX64(env->svcr, SVCR, SM)) { + sve = sme_exception_el(env, el) == 0; + } else if (cpu_isar_feature(aa64_sve, cpu)) { + sve = sve_exception_el(env, el) == 0; + } else { + sve = false; + } + + if (sve) { int j, zcr_len = sve_vqm1_for_el(env, el); for (i = 0; i <= FFR_PRED_NUM; i++) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This includes the build rules for the decoder, and the new file for translation, but excludes any instructions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 1 + target/arm/sme.decode | 20 ++++++++++++++++++++ target/arm/translate-a64.c | 7 ++++++- target/arm/translate-sme.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/meson.build | 2 ++ 5 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 target/arm/sme.decode create mode 100644 target/arm/translate-sme.c diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int pred_gvec_reg_size(DisasContext *s) } bool disas_sve(DisasContext *, uint32_t); +bool disas_sme(DisasContext *, uint32_t); void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz); diff --git a/target/arm/sme.decode b/target/arm/sme.decode new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ +# AArch64 SME instruction descriptions +# +# Copyright (c) 2022 Linaro, Ltd +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>. + +# +# This file is processed by scripts/decodetree.py +# diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) } switch (extract32(insn, 25, 4)) { - case 0x0: case 0x1: case 0x3: /* UNALLOCATED */ + case 0x0: + if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) { + unallocated_encoding(s); + } + break; + case 0x1: case 0x3: /* UNALLOCATED */ unallocated_encoding(s); break; case 0x2: diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ +/* + * AArch64 SME translation + * + * Copyright (c) 2022 Linaro, Ltd + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "tcg/tcg-op.h" +#include "tcg/tcg-op-gvec.h" +#include "tcg/tcg-gvec-desc.h" +#include "translate.h" +#include "exec/helper-gen.h" +#include "translate-a64.h" +#include "fpu/softfloat.h" + + +/* + * Include the generated decoder. + */ + +#include "decode-sme.c.inc" diff --git a/target/arm/meson.build b/target/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/meson.build +++ b/target/arm/meson.build @@ -XXX,XX +XXX,XX @@ gen = [ decodetree.process('sve.decode', extra_args: '--decode=disas_sve'), + decodetree.process('sme.decode', extra_args: '--decode=disas_sme'), decodetree.process('neon-shared.decode', extra_args: '--decode=disas_neon_shared'), decodetree.process('neon-dp.decode', extra_args: '--decode=disas_neon_dp'), decodetree.process('neon-ls.decode', extra_args: '--decode=disas_neon_ls'), @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_true: files( 'sme_helper.c', 'translate-a64.c', 'translate-sve.c', + 'translate-sme.c', )) arm_softmmu_ss = ss.source_set() -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This new behaviour is in the ARM pseudocode function AArch64.CheckFPAdvSIMDEnabled, which applies to AArch32 via AArch32.CheckAdvSIMDOrFPEnabled when the EL to which the trap would be delivered is in AArch64 mode. Given that ARMv9 drops support for AArch32 outside EL0, the trap EL detection ought to be trivially true, but the pseudocode still contains a number of conditions, and QEMU has not yet committed to dropping A32 support for EL[12] when v9 features are present. Since the computation of SME_TRAP_NONSTREAMING is necessarily different for the two modes, we might as well preserve bits within TBFLAG_ANY and allocate separate bits within TBFLAG_A32 and TBFLAG_A64 instead. Note that DDI0616A.a has typos for bits [22:21] of LD1RO in the table of instructions illegal in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 +++ target/arm/translate.h | 4 ++ target/arm/sme-fa64.decode | 90 ++++++++++++++++++++++++++++++++++++++ target/arm/helper.c | 41 +++++++++++++++++ target/arm/translate-a64.c | 40 ++++++++++++++++- target/arm/translate-vfp.c | 12 +++++ target/arm/translate.c | 2 + target/arm/meson.build | 1 + 8 files changed, 195 insertions(+), 2 deletions(-) create mode 100644 target/arm/sme-fa64.decode diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, HSTR_ACTIVE, 9, 1) * the same thing as the current security state of the processor! */ FIELD(TBFLAG_A32, NS, 10, 1) +/* + * Indicates that SME Streaming mode is active, and SMCR_ELx.FA64 is not. + * This requires an SME trap from AArch32 mode when using NEON. + */ +FIELD(TBFLAG_A32, SME_TRAP_NONSTREAMING, 11, 1) /* * Bit usage when in AArch32 state, for M-profile only. @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, SMEEXC_EL, 20, 2) FIELD(TBFLAG_A64, PSTATE_SM, 22, 1) FIELD(TBFLAG_A64, PSTATE_ZA, 23, 1) FIELD(TBFLAG_A64, SVL, 24, 4) +/* Indicates that SME Streaming mode is active, and SMCR_ELx.FA64 is not. */ +FIELD(TBFLAG_A64, SME_TRAP_NONSTREAMING, 28, 1) /* * Helpers for using the above. diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool pstate_sm; /* True if PSTATE.ZA is set. */ bool pstate_za; + /* True if non-streaming insns should raise an SME Streaming exception. */ + bool sme_trap_nonstreaming; + /* True if the current instruction is non-streaming. */ + bool is_nonstreaming; /* True if MVE insns are definitely not predicated by VPR or LTPSIZE */ bool mve_no_pred; /* diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ +# AArch64 SME allowed instruction decoding +# +# Copyright (c) 2022 Linaro, Ltd +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>. + +# +# This file is processed by scripts/decodetree.py +# + +# These patterns are taken from Appendix E1.1 of DDI0616 A.a, +# Arm Architecture Reference Manual Supplement, +# The Scalable Matrix Extension (SME), for Armv9-A + +{ + [ + OK 0-00 1110 0000 0001 0010 11-- ---- ---- # SMOV W|Xd,Vn.B[0] + OK 0-00 1110 0000 0010 0010 11-- ---- ---- # SMOV W|Xd,Vn.H[0] + OK 0100 1110 0000 0100 0010 11-- ---- ---- # SMOV Xd,Vn.S[0] + OK 0000 1110 0000 0001 0011 11-- ---- ---- # UMOV Wd,Vn.B[0] + OK 0000 1110 0000 0010 0011 11-- ---- ---- # UMOV Wd,Vn.H[0] + OK 0000 1110 0000 0100 0011 11-- ---- ---- # UMOV Wd,Vn.S[0] + OK 0100 1110 0000 1000 0011 11-- ---- ---- # UMOV Xd,Vn.D[0] + ] + FAIL 0--0 111- ---- ---- ---- ---- ---- ---- # Advanced SIMD vector operations +} + +{ + [ + OK 0101 1110 --1- ---- 11-1 11-- ---- ---- # FMULX/FRECPS/FRSQRTS (scalar) + OK 0101 1110 -10- ---- 00-1 11-- ---- ---- # FMULX/FRECPS/FRSQRTS (scalar, FP16) + OK 01-1 1110 1-10 0001 11-1 10-- ---- ---- # FRECPE/FRSQRTE/FRECPX (scalar) + OK 01-1 1110 1111 1001 11-1 10-- ---- ---- # FRECPE/FRSQRTE/FRECPX (scalar, FP16) + ] + FAIL 01-1 111- ---- ---- ---- ---- ---- ---- # Advanced SIMD single-element operations +} + +FAIL 0-00 110- ---- ---- ---- ---- ---- ---- # Advanced SIMD structure load/store +FAIL 1100 1110 ---- ---- ---- ---- ---- ---- # Advanced SIMD cryptography extensions +FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS + +# These are the "avoidance of doubt" final table of Illegal Advanced SIMD instructions +# We don't actually need to include these, as the default is OK. +# -001 111- ---- ---- ---- ---- ---- ---- # Scalar floating-point operations +# --10 110- ---- ---- ---- ---- ---- ---- # Load/store pair of FP registers +# --01 1100 ---- ---- ---- ---- ---- ---- # Load FP register (PC-relative literal) +# --11 1100 --0- ---- ---- ---- ---- ---- # Load/store FP register (unscaled imm) +# --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) +# --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) + +FAIL 0000 0100 --1- ---- 1010 ---- ---- ---- # ADR +FAIL 0000 0100 --1- ---- 1011 -0-- ---- ---- # FTSSEL, FEXPA +FAIL 0000 0101 --10 0001 100- ---- ---- ---- # COMPACT +FAIL 0010 0101 --01 100- 1111 000- ---0 ---- # RDFFR, RDFFRS +FAIL 0010 0101 --10 1--- 1001 ---- ---- ---- # WRFFR, SETFFR +FAIL 0100 0101 --0- ---- 1011 ---- ---- ---- # BDEP, BEXT, BGRP +FAIL 0100 0101 000- ---- 0110 1--- ---- ---- # PMULLB, PMULLT (128b result) +FAIL 0110 0100 --1- ---- 1110 01-- ---- ---- # FMMLA, BFMMLA +FAIL 0110 0101 --0- ---- 0000 11-- ---- ---- # FTSMUL +FAIL 0110 0101 --01 0--- 100- ---- ---- ---- # FTMAD +FAIL 0110 0101 --01 1--- 001- ---- ---- ---- # FADDA +FAIL 0100 0101 --0- ---- 1001 10-- ---- ---- # SMMLA, UMMLA, USMMLA +FAIL 0100 0101 --1- ---- 1--- ---- ---- ---- # SVE2 string/histo/crypto instructions +FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) +FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) +FAIL 1000 0100 0-1- ---- 0--- ---- ---- ---- # SVE 32-bit gather prefetch (scalar+vector) +FAIL 1000 010- -01- ---- 1--- ---- ---- ---- # SVE 32-bit gather load (vector+imm) +FAIL 1000 0100 0-0- ---- 0--- ---- ---- ---- # SVE 32-bit gather load byte (scalar+vector) +FAIL 1000 0100 1--- ---- 0--- ---- ---- ---- # SVE 32-bit gather load half (scalar+vector) +FAIL 1000 0101 0--- ---- 0--- ---- ---- ---- # SVE 32-bit gather load word (scalar+vector) +FAIL 1010 010- ---- ---- 011- ---- ---- ---- # SVE contiguous FF load (scalar+scalar) +FAIL 1010 010- ---1 ---- 101- ---- ---- ---- # SVE contiguous NF load (scalar+imm) +FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) +FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) +FAIL 1100 010- ---- ---- ---- ---- ---- ---- # SVE 64-bit gather load/prefetch +FAIL 1110 010- -00- ---- 001- ---- ---- ---- # SVE2 64-bit scatter NT store (vector+scalar) +FAIL 1110 010- -10- ---- 001- ---- ---- ---- # SVE2 32-bit scatter NT store (vector+scalar) +FAIL 1110 010- ---- ---- 1-0- ---- ---- ---- # SVE scatter store (scalar+32-bit vector) +FAIL 1110 010- ---- ---- 101- ---- ---- ---- # SVE scatter store (misc) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int sme_exception_el(CPUARMState *env, int el) return 0; } +/* This corresponds to the ARM pseudocode function IsFullA64Enabled(). */ +static bool sme_fa64(CPUARMState *env, int el) +{ + if (!cpu_isar_feature(aa64_sme_fa64, env_archcpu(env))) { + return false; + } + + if (el <= 1 && !el_is_in_host(env, el)) { + if (!FIELD_EX64(env->vfp.smcr_el[1], SMCR, FA64)) { + return false; + } + } + if (el <= 2 && arm_is_el2_enabled(env)) { + if (!FIELD_EX64(env->vfp.smcr_el[2], SMCR, FA64)) { + return false; + } + } + if (arm_feature(env, ARM_FEATURE_EL3)) { + if (!FIELD_EX64(env->vfp.smcr_el[3], SMCR, FA64)) { + return false; + } + } + + return true; +} + /* * Given that SVE is enabled, return the vector length for EL. */ @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, DP_TBFLAG_ANY(flags, PSTATE__IL, 1); } + /* + * The SME exception we are testing for is raised via + * AArch64.CheckFPAdvSIMDEnabled(), as called from + * AArch32.CheckAdvSIMDOrFPEnabled(). + */ + if (el == 0 + && FIELD_EX64(env->svcr, SVCR, SM) + && (!arm_is_el2_enabled(env) + || (arm_el_is_aa64(env, 2) && !(env->cp15.hcr_el2 & HCR_TGE))) + && arm_el_is_aa64(env, 1) + && !sme_fa64(env, el)) { + DP_TBFLAG_A32(flags, SME_TRAP_NONSTREAMING, 1); + } + return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, } if (FIELD_EX64(env->svcr, SVCR, SM)) { DP_TBFLAG_A64(flags, PSTATE_SM, 1); + DP_TBFLAG_A64(flags, SME_TRAP_NONSTREAMING, !sme_fa64(env, el)); } DP_TBFLAG_A64(flags, PSTATE_ZA, FIELD_EX64(env->svcr, SVCR, ZA)); } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void do_vec_ld(DisasContext *s, int destidx, int element, * unallocated-encoding checks (otherwise the syndrome information * for the resulting exception will be incorrect). */ -static bool fp_access_check(DisasContext *s) +static bool fp_access_check_only(DisasContext *s) { if (s->fp_excp_el) { assert(!s->fp_access_checked); @@ -XXX,XX +XXX,XX @@ static bool fp_access_check(DisasContext *s) return true; } +static bool fp_access_check(DisasContext *s) +{ + if (!fp_access_check_only(s)) { + return false; + } + if (s->sme_trap_nonstreaming && s->is_nonstreaming) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_smetrap(SME_ET_Streaming, false)); + return false; + } + return true; +} + /* Check that SVE access is enabled. If it is, return true. * If not, emit code to generate an appropriate exception and return false. */ @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, default: g_assert_not_reached(); } - if ((ri->type & ARM_CP_FPU) && !fp_access_check(s)) { + if ((ri->type & ARM_CP_FPU) && !fp_access_check_only(s)) { return; } else if ((ri->type & ARM_CP_SVE) && !sve_access_check(s)) { return; @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_simd_fp(DisasContext *s, uint32_t insn) } } +/* + * Include the generated SME FA64 decoder. + */ + +#include "decode-sme-fa64.c.inc" + +static bool trans_OK(DisasContext *s, arg_OK *a) +{ + return true; +} + +static bool trans_FAIL(DisasContext *s, arg_OK *a) +{ + s->is_nonstreaming = true; + return true; +} + /** * is_guarded_page: * @env: The cpu environment @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->mte_active[1] = EX_TBFLAG_A64(tb_flags, MTE0_ACTIVE); dc->pstate_sm = EX_TBFLAG_A64(tb_flags, PSTATE_SM); dc->pstate_za = EX_TBFLAG_A64(tb_flags, PSTATE_ZA); + dc->sme_trap_nonstreaming = EX_TBFLAG_A64(tb_flags, SME_TRAP_NONSTREAMING); dc->vec_len = 0; dc->vec_stride = 0; dc->cp_regs = arm_cpu->cp_regs; @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) } } + s->is_nonstreaming = false; + if (s->sme_trap_nonstreaming) { + disas_sme_fa64(s, insn); + } + switch (extract32(insn, 25, 4)) { case 0x0: if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) { diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static bool vfp_access_check_a(DisasContext *s, bool ignore_vfp_enabled) return false; } + /* + * Note that rebuild_hflags_a32 has already accounted for being in EL0 + * and the higher EL in A64 mode, etc. Unlike A64 mode, there do not + * appear to be any insns which touch VFP which are allowed. + */ + if (s->sme_trap_nonstreaming) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_smetrap(SME_ET_Streaming, + s->base.pc_next - s->pc_curr == 2)); + return false; + } + if (!s->vfp_enabled && !ignore_vfp_enabled) { assert(!arm_dc_feature(s, ARM_FEATURE_M)); unallocated_encoding(s); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->vec_len = EX_TBFLAG_A32(tb_flags, VECLEN); dc->vec_stride = EX_TBFLAG_A32(tb_flags, VECSTRIDE); } + dc->sme_trap_nonstreaming = + EX_TBFLAG_A32(tb_flags, SME_TRAP_NONSTREAMING); } dc->cp_regs = cpu->cp_regs; dc->features = env->features; diff --git a/target/arm/meson.build b/target/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/meson.build +++ b/target/arm/meson.build @@ -XXX,XX +XXX,XX @@ gen = [ decodetree.process('sve.decode', extra_args: '--decode=disas_sve'), decodetree.process('sme.decode', extra_args: '--decode=disas_sme'), + decodetree.process('sme-fa64.decode', extra_args: '--static-decode=disas_sme_fa64'), decodetree.process('neon-shared.decode', extra_args: '--decode=disas_neon_shared'), decodetree.process('neon-dp.decode', extra_args: '--decode=disas_neon_dp'), decodetree.process('neon-ls.decode', extra_args: '--decode=disas_neon_ls'), -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark ADR as a non-streaming instruction, which should trap if full a64 support is not enabled in streaming mode. Removing entries from sme-fa64.decode is an easy way to see what remains to be done. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 7 +++++++ target/arm/sme-fa64.decode | 1 - target/arm/translate-sve.c | 8 ++++---- 3 files changed, 11 insertions(+), 5 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ uint64_t asimd_imm_const(uint32_t imm, int cmode, int op); static bool trans_##NAME(DisasContext *s, arg_##NAME *a) \ { return dc_isar_feature(FEAT, s) && FUNC(s, __VA_ARGS__); } +#define TRANS_FEAT_NONSTREAMING(NAME, FEAT, FUNC, ...) \ + static bool trans_##NAME(DisasContext *s, arg_##NAME *a) \ + { \ + s->is_nonstreaming = true; \ + return dc_isar_feature(FEAT, s) && FUNC(s, __VA_ARGS__); \ + } + #endif /* TARGET_ARM_TRANSLATE_H */ diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0000 0100 --1- ---- 1010 ---- ---- ---- # ADR FAIL 0000 0100 --1- ---- 1011 -0-- ---- ---- # FTSSEL, FEXPA FAIL 0000 0101 --10 0001 100- ---- ---- ---- # COMPACT FAIL 0010 0101 --01 100- 1111 000- ---0 ---- # RDFFR, RDFFRS diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_adr(DisasContext *s, arg_rrri *a, gen_helper_gvec_3 *fn) return gen_gvec_ool_zzz(s, fn, a->rd, a->rn, a->rm, a->imm); } -TRANS_FEAT(ADR_p32, aa64_sve, do_adr, a, gen_helper_sve_adr_p32) -TRANS_FEAT(ADR_p64, aa64_sve, do_adr, a, gen_helper_sve_adr_p64) -TRANS_FEAT(ADR_s32, aa64_sve, do_adr, a, gen_helper_sve_adr_s32) -TRANS_FEAT(ADR_u32, aa64_sve, do_adr, a, gen_helper_sve_adr_u32) +TRANS_FEAT_NONSTREAMING(ADR_p32, aa64_sve, do_adr, a, gen_helper_sve_adr_p32) +TRANS_FEAT_NONSTREAMING(ADR_p64, aa64_sve, do_adr, a, gen_helper_sve_adr_p64) +TRANS_FEAT_NONSTREAMING(ADR_s32, aa64_sve, do_adr, a, gen_helper_sve_adr_s32) +TRANS_FEAT_NONSTREAMING(ADR_u32, aa64_sve, do_adr, a, gen_helper_sve_adr_u32) /* *** SVE Integer Misc - Unpredicated Group -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 2 -- target/arm/translate-sve.c | 9 ++++++--- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS FAIL 0000 0100 --1- ---- 1011 -0-- ---- ---- # FTSSEL, FEXPA FAIL 0000 0101 --10 0001 100- ---- ---- ---- # COMPACT -FAIL 0010 0101 --01 100- 1111 000- ---0 ---- # RDFFR, RDFFRS -FAIL 0010 0101 --10 1--- 1001 ---- ---- ---- # WRFFR, SETFFR FAIL 0100 0101 --0- ---- 1011 ---- ---- ---- # BDEP, BEXT, BGRP FAIL 0100 0101 000- ---- 0110 1--- ---- ---- # PMULLB, PMULLT (128b result) FAIL 0110 0100 --1- ---- 1110 01-- ---- ---- # FMMLA, BFMMLA diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_predset(DisasContext *s, int esz, int rd, int pat, bool setflag) TRANS_FEAT(PTRUE, aa64_sve, do_predset, a->esz, a->rd, a->pat, a->s) /* Note pat == 31 is #all, to set all elements. */ -TRANS_FEAT(SETFFR, aa64_sve, do_predset, 0, FFR_PRED_NUM, 31, false) +TRANS_FEAT_NONSTREAMING(SETFFR, aa64_sve, + do_predset, 0, FFR_PRED_NUM, 31, false) /* Note pat == 32 is #unimp, to set no elements. */ TRANS_FEAT(PFALSE, aa64_sve, do_predset, 0, a->rd, 32, false) @@ -XXX,XX +XXX,XX @@ static bool trans_RDFFR_p(DisasContext *s, arg_RDFFR_p *a) .rd = a->rd, .pg = a->pg, .s = a->s, .rn = FFR_PRED_NUM, .rm = FFR_PRED_NUM, }; + + s->is_nonstreaming = true; return trans_AND_pppp(s, &alt_a); } -TRANS_FEAT(RDFFR, aa64_sve, do_mov_p, a->rd, FFR_PRED_NUM) -TRANS_FEAT(WRFFR, aa64_sve, do_mov_p, FFR_PRED_NUM, a->rn) +TRANS_FEAT_NONSTREAMING(RDFFR, aa64_sve, do_mov_p, a->rd, FFR_PRED_NUM) +TRANS_FEAT_NONSTREAMING(WRFFR, aa64_sve, do_mov_p, FFR_PRED_NUM, a->rn) static bool do_pfirst_pnext(DisasContext *s, arg_rr_esz *a, void (*gen_fn)(TCGv_i32, TCGv_ptr, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 3 --- target/arm/translate-sve.c | 22 ++++++++++++---------- 2 files changed, 12 insertions(+), 13 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0000 0100 --1- ---- 1011 -0-- ---- ---- # FTSSEL, FEXPA -FAIL 0000 0101 --10 0001 100- ---- ---- ---- # COMPACT -FAIL 0100 0101 --0- ---- 1011 ---- ---- ---- # BDEP, BEXT, BGRP FAIL 0100 0101 000- ---- 0110 1--- ---- ---- # PMULLB, PMULLT (128b result) FAIL 0110 0100 --1- ---- 1110 01-- ---- ---- # FMMLA, BFMMLA FAIL 0110 0101 --0- ---- 0000 11-- ---- ---- # FTSMUL diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_2 * const fexpa_fns[4] = { NULL, gen_helper_sve_fexpa_h, gen_helper_sve_fexpa_s, gen_helper_sve_fexpa_d, }; -TRANS_FEAT(FEXPA, aa64_sve, gen_gvec_ool_zz, - fexpa_fns[a->esz], a->rd, a->rn, 0) +TRANS_FEAT_NONSTREAMING(FEXPA, aa64_sve, gen_gvec_ool_zz, + fexpa_fns[a->esz], a->rd, a->rn, 0) static gen_helper_gvec_3 * const ftssel_fns[4] = { NULL, gen_helper_sve_ftssel_h, gen_helper_sve_ftssel_s, gen_helper_sve_ftssel_d, }; -TRANS_FEAT(FTSSEL, aa64_sve, gen_gvec_ool_arg_zzz, ftssel_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(FTSSEL, aa64_sve, gen_gvec_ool_arg_zzz, + ftssel_fns[a->esz], a, 0) /* *** SVE Predicate Logical Operations Group @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(TRN2_q, aa64_sve_f64mm, gen_gvec_ool_arg_zzz, static gen_helper_gvec_3 * const compact_fns[4] = { NULL, NULL, gen_helper_sve_compact_s, gen_helper_sve_compact_d }; -TRANS_FEAT(COMPACT, aa64_sve, gen_gvec_ool_arg_zpz, compact_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(COMPACT, aa64_sve, gen_gvec_ool_arg_zpz, + compact_fns[a->esz], a, 0) /* Call the helper that computes the ARM LastActiveElement pseudocode * function, scaled by the element size. This includes the not found @@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3 * const bext_fns[4] = { gen_helper_sve2_bext_b, gen_helper_sve2_bext_h, gen_helper_sve2_bext_s, gen_helper_sve2_bext_d, }; -TRANS_FEAT(BEXT, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, - bext_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(BEXT, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, + bext_fns[a->esz], a, 0) static gen_helper_gvec_3 * const bdep_fns[4] = { gen_helper_sve2_bdep_b, gen_helper_sve2_bdep_h, gen_helper_sve2_bdep_s, gen_helper_sve2_bdep_d, }; -TRANS_FEAT(BDEP, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, - bdep_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(BDEP, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, + bdep_fns[a->esz], a, 0) static gen_helper_gvec_3 * const bgrp_fns[4] = { gen_helper_sve2_bgrp_b, gen_helper_sve2_bgrp_h, gen_helper_sve2_bgrp_s, gen_helper_sve2_bgrp_d, }; -TRANS_FEAT(BGRP, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, - bgrp_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(BGRP, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, + bgrp_fns[a->esz], a, 0) static gen_helper_gvec_3 * const cadd_fns[4] = { gen_helper_sve2_cadd_b, gen_helper_sve2_cadd_h, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 2 -- target/arm/translate-sve.c | 24 +++++++++++++++--------- 2 files changed, 15 insertions(+), 11 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0100 0101 000- ---- 0110 1--- ---- ---- # PMULLB, PMULLT (128b result) -FAIL 0110 0100 --1- ---- 1110 01-- ---- ---- # FMMLA, BFMMLA FAIL 0110 0101 --0- ---- 0000 11-- ---- ---- # FTSMUL FAIL 0110 0101 --01 0--- 100- ---- ---- ---- # FTMAD FAIL 0110 0101 --01 1--- 001- ---- ---- ---- # FADDA diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_trans_pmull(DisasContext *s, arg_rrr_esz *a, bool sel) gen_helper_gvec_pmull_q, gen_helper_sve2_pmull_h, NULL, gen_helper_sve2_pmull_d, }; - if (a->esz == 0 - ? !dc_isar_feature(aa64_sve2_pmull128, s) - : !dc_isar_feature(aa64_sve, s)) { + + if (a->esz == 0) { + if (!dc_isar_feature(aa64_sve2_pmull128, s)) { + return false; + } + s->is_nonstreaming = true; + } else if (!dc_isar_feature(aa64_sve, s)) { return false; } return gen_gvec_ool_arg_zzz(s, fns[a->esz], a, sel); @@ -XXX,XX +XXX,XX @@ DO_ZPZZ_FP(FMINP, aa64_sve2, sve2_fminp_zpzz) * SVE Integer Multiply-Add (unpredicated) */ -TRANS_FEAT(FMMLA_s, aa64_sve_f32mm, gen_gvec_fpst_zzzz, gen_helper_fmmla_s, - a->rd, a->rn, a->rm, a->ra, 0, FPST_FPCR) -TRANS_FEAT(FMMLA_d, aa64_sve_f64mm, gen_gvec_fpst_zzzz, gen_helper_fmmla_d, - a->rd, a->rn, a->rm, a->ra, 0, FPST_FPCR) +TRANS_FEAT_NONSTREAMING(FMMLA_s, aa64_sve_f32mm, gen_gvec_fpst_zzzz, + gen_helper_fmmla_s, a->rd, a->rn, a->rm, a->ra, + 0, FPST_FPCR) +TRANS_FEAT_NONSTREAMING(FMMLA_d, aa64_sve_f64mm, gen_gvec_fpst_zzzz, + gen_helper_fmmla_d, a->rd, a->rn, a->rm, a->ra, + 0, FPST_FPCR) static gen_helper_gvec_4 * const sqdmlal_zzzw_fns[] = { NULL, gen_helper_sve2_sqdmlal_zzzw_h, @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(BFDOT_zzzz, aa64_sve_bf16, gen_gvec_ool_arg_zzzz, TRANS_FEAT(BFDOT_zzxz, aa64_sve_bf16, gen_gvec_ool_arg_zzxz, gen_helper_gvec_bfdot_idx, a) -TRANS_FEAT(BFMMLA, aa64_sve_bf16, gen_gvec_ool_arg_zzzz, - gen_helper_gvec_bfmmla, a, 0) +TRANS_FEAT_NONSTREAMING(BFMMLA, aa64_sve_bf16, gen_gvec_ool_arg_zzzz, + gen_helper_gvec_bfmmla, a, 0) static bool do_BFMLAL_zzzw(DisasContext *s, arg_rrrr_esz *a, bool sel) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 3 --- target/arm/translate-sve.c | 15 +++++++++++---- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0110 0101 --0- ---- 0000 11-- ---- ---- # FTSMUL -FAIL 0110 0101 --01 0--- 100- ---- ---- ---- # FTMAD -FAIL 0110 0101 --01 1--- 001- ---- ---- ---- # FADDA FAIL 0100 0101 --0- ---- 1001 10-- ---- ---- # SMMLA, UMMLA, USMMLA FAIL 0100 0101 --1- ---- 1--- ---- ---- ---- # SVE2 string/histo/crypto instructions FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3_ptr * const ftmad_fns[4] = { NULL, gen_helper_sve_ftmad_h, gen_helper_sve_ftmad_s, gen_helper_sve_ftmad_d, }; -TRANS_FEAT(FTMAD, aa64_sve, gen_gvec_fpst_zzz, - ftmad_fns[a->esz], a->rd, a->rn, a->rm, a->imm, - a->esz == MO_16 ? FPST_FPCR_F16 : FPST_FPCR) +TRANS_FEAT_NONSTREAMING(FTMAD, aa64_sve, gen_gvec_fpst_zzz, + ftmad_fns[a->esz], a->rd, a->rn, a->rm, a->imm, + a->esz == MO_16 ? FPST_FPCR_F16 : FPST_FPCR) /* *** SVE Floating Point Accumulating Reduction Group @@ -XXX,XX +XXX,XX @@ static bool trans_FADDA(DisasContext *s, arg_rprr_esz *a) if (a->esz == 0 || !dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_FADDA(DisasContext *s, arg_rprr_esz *a) DO_FP3(FADD_zzz, fadd) DO_FP3(FSUB_zzz, fsub) DO_FP3(FMUL_zzz, fmul) -DO_FP3(FTSMUL, ftsmul) DO_FP3(FRECPS, recps) DO_FP3(FRSQRTS, rsqrts) #undef DO_FP3 +static gen_helper_gvec_3_ptr * const ftsmul_fns[4] = { + NULL, gen_helper_gvec_ftsmul_h, + gen_helper_gvec_ftsmul_s, gen_helper_gvec_ftsmul_d +}; +TRANS_FEAT_NONSTREAMING(FTSMUL, aa64_sve, gen_gvec_fpst_arg_zzz, + ftsmul_fns[a->esz], a, 0) + /* *** SVE Floating Point Arithmetic - Predicated Group */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 1 - target/arm/translate-sve.c | 12 ++++++------ 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0100 0101 --0- ---- 1001 10-- ---- ---- # SMMLA, UMMLA, USMMLA FAIL 0100 0101 --1- ---- 1--- ---- ---- ---- # SVE2 string/histo/crypto instructions FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(FMLALT_zzxw, aa64_sve2, do_FMLAL_zzxw, a, false, true) TRANS_FEAT(FMLSLB_zzxw, aa64_sve2, do_FMLAL_zzxw, a, true, false) TRANS_FEAT(FMLSLT_zzxw, aa64_sve2, do_FMLAL_zzxw, a, true, true) -TRANS_FEAT(SMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, - gen_helper_gvec_smmla_b, a, 0) -TRANS_FEAT(USMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, - gen_helper_gvec_usmmla_b, a, 0) -TRANS_FEAT(UMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, - gen_helper_gvec_ummla_b, a, 0) +TRANS_FEAT_NONSTREAMING(SMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, + gen_helper_gvec_smmla_b, a, 0) +TRANS_FEAT_NONSTREAMING(USMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, + gen_helper_gvec_usmmla_b, a, 0) +TRANS_FEAT_NONSTREAMING(UMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, + gen_helper_gvec_ummla_b, a, 0) TRANS_FEAT(BFDOT_zzzz, aa64_sve_bf16, gen_gvec_ool_arg_zzzz, gen_helper_gvec_bfdot, a, 0) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 1 - target/arm/translate-sve.c | 35 ++++++++++++++++++----------------- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0100 0101 --1- ---- 1--- ---- ---- ---- # SVE2 string/histo/crypto instructions FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) FAIL 1000 0100 0-1- ---- 0--- ---- ---- ---- # SVE 32-bit gather prefetch (scalar+vector) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_SVE2_ZZZ_NARROW(RSUBHNT, rsubhnt) static gen_helper_gvec_flags_4 * const match_fns[4] = { gen_helper_sve2_match_ppzz_b, gen_helper_sve2_match_ppzz_h, NULL, NULL }; -TRANS_FEAT(MATCH, aa64_sve2, do_ppzz_flags, a, match_fns[a->esz]) +TRANS_FEAT_NONSTREAMING(MATCH, aa64_sve2, do_ppzz_flags, a, match_fns[a->esz]) static gen_helper_gvec_flags_4 * const nmatch_fns[4] = { gen_helper_sve2_nmatch_ppzz_b, gen_helper_sve2_nmatch_ppzz_h, NULL, NULL }; -TRANS_FEAT(NMATCH, aa64_sve2, do_ppzz_flags, a, nmatch_fns[a->esz]) +TRANS_FEAT_NONSTREAMING(NMATCH, aa64_sve2, do_ppzz_flags, a, nmatch_fns[a->esz]) static gen_helper_gvec_4 * const histcnt_fns[4] = { NULL, NULL, gen_helper_sve2_histcnt_s, gen_helper_sve2_histcnt_d }; -TRANS_FEAT(HISTCNT, aa64_sve2, gen_gvec_ool_arg_zpzz, - histcnt_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(HISTCNT, aa64_sve2, gen_gvec_ool_arg_zpzz, + histcnt_fns[a->esz], a, 0) -TRANS_FEAT(HISTSEG, aa64_sve2, gen_gvec_ool_arg_zzz, - a->esz == 0 ? gen_helper_sve2_histseg : NULL, a, 0) +TRANS_FEAT_NONSTREAMING(HISTSEG, aa64_sve2, gen_gvec_ool_arg_zzz, + a->esz == 0 ? gen_helper_sve2_histseg : NULL, a, 0) DO_ZPZZ_FP(FADDP, aa64_sve2, sve2_faddp_zpzz) DO_ZPZZ_FP(FMAXNMP, aa64_sve2, sve2_fmaxnmp_zpzz) @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(SQRDCMLAH_zzzz, aa64_sve2, gen_gvec_ool_zzzz, TRANS_FEAT(USDOT_zzzz, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, a->esz == 2 ? gen_helper_gvec_usdot_b : NULL, a, 0) -TRANS_FEAT(AESMC, aa64_sve2_aes, gen_gvec_ool_zz, - gen_helper_crypto_aesmc, a->rd, a->rd, a->decrypt) +TRANS_FEAT_NONSTREAMING(AESMC, aa64_sve2_aes, gen_gvec_ool_zz, + gen_helper_crypto_aesmc, a->rd, a->rd, a->decrypt) -TRANS_FEAT(AESE, aa64_sve2_aes, gen_gvec_ool_arg_zzz, - gen_helper_crypto_aese, a, false) -TRANS_FEAT(AESD, aa64_sve2_aes, gen_gvec_ool_arg_zzz, - gen_helper_crypto_aese, a, true) +TRANS_FEAT_NONSTREAMING(AESE, aa64_sve2_aes, gen_gvec_ool_arg_zzz, + gen_helper_crypto_aese, a, false) +TRANS_FEAT_NONSTREAMING(AESD, aa64_sve2_aes, gen_gvec_ool_arg_zzz, + gen_helper_crypto_aese, a, true) -TRANS_FEAT(SM4E, aa64_sve2_sm4, gen_gvec_ool_arg_zzz, - gen_helper_crypto_sm4e, a, 0) -TRANS_FEAT(SM4EKEY, aa64_sve2_sm4, gen_gvec_ool_arg_zzz, - gen_helper_crypto_sm4ekey, a, 0) +TRANS_FEAT_NONSTREAMING(SM4E, aa64_sve2_sm4, gen_gvec_ool_arg_zzz, + gen_helper_crypto_sm4e, a, 0) +TRANS_FEAT_NONSTREAMING(SM4EKEY, aa64_sve2_sm4, gen_gvec_ool_arg_zzz, + gen_helper_crypto_sm4ekey, a, 0) -TRANS_FEAT(RAX1, aa64_sve2_sha3, gen_gvec_fn_arg_zzz, gen_gvec_rax1, a) +TRANS_FEAT_NONSTREAMING(RAX1, aa64_sve2_sha3, gen_gvec_fn_arg_zzz, + gen_gvec_rax1, a) TRANS_FEAT(FCVTNT_sh, aa64_sve2, gen_gvec_fpst_arg_zpz, gen_helper_sve2_fcvtnt_sh, a, 0, FPST_FPCR) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 9 --------- target/arm/translate-sve.c | 6 ++++++ 2 files changed, 6 insertions(+), 9 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) FAIL 1000 0100 0-1- ---- 0--- ---- ---- ---- # SVE 32-bit gather prefetch (scalar+vector) -FAIL 1000 010- -01- ---- 1--- ---- ---- ---- # SVE 32-bit gather load (vector+imm) -FAIL 1000 0100 0-0- ---- 0--- ---- ---- ---- # SVE 32-bit gather load byte (scalar+vector) -FAIL 1000 0100 1--- ---- 0--- ---- ---- ---- # SVE 32-bit gather load half (scalar+vector) -FAIL 1000 0101 0--- ---- 0--- ---- ---- ---- # SVE 32-bit gather load word (scalar+vector) FAIL 1010 010- ---- ---- 011- ---- ---- ---- # SVE contiguous FF load (scalar+scalar) FAIL 1010 010- ---1 ---- 101- ---- ---- ---- # SVE contiguous NF load (scalar+imm) FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) FAIL 1100 010- ---- ---- ---- ---- ---- ---- # SVE 64-bit gather load/prefetch -FAIL 1110 010- -00- ---- 001- ---- ---- ---- # SVE2 64-bit scatter NT store (vector+scalar) -FAIL 1110 010- -10- ---- 001- ---- ---- ---- # SVE2 32-bit scatter NT store (vector+scalar) -FAIL 1110 010- ---- ---- 1-0- ---- ---- ---- # SVE scatter store (scalar+32-bit vector) -FAIL 1110 010- ---- ---- 101- ---- ---- ---- # SVE scatter store (misc) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1_zprz(DisasContext *s, arg_LD1_zprz *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LD1_zpiz(DisasContext *s, arg_LD1_zpiz *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDNT1_zprz(DisasContext *s, arg_LD1_zprz *a) if (!dc_isar_feature(aa64_sve2, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zpiz(DisasContext *s, arg_ST1_zpiz *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_STNT1_zprz(DisasContext *s, arg_ST1_zprz *a) if (!dc_isar_feature(aa64_sve2, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. In this case, introduce PRF_ns (prefetch non-streaming) to handle the checks. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 3 --- target/arm/sve.decode | 10 +++++----- target/arm/translate-sve.c | 11 +++++++++++ 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) -FAIL 1000 0100 0-1- ---- 0--- ---- ---- ---- # SVE 32-bit gather prefetch (scalar+vector) FAIL 1010 010- ---- ---- 011- ---- ---- ---- # SVE contiguous FF load (scalar+scalar) FAIL 1010 010- ---1 ---- 101- ---- ---- ---- # SVE contiguous NF load (scalar+imm) FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) -FAIL 1100 010- ---- ---- ---- ---- ---- ---- # SVE 64-bit gather load/prefetch diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ LD1RO_zpri 1010010 .. 01 0.... 001 ... ..... ..... \ @rpri_load_msz nreg=0 # SVE 32-bit gather prefetch (scalar plus 32-bit scaled offsets) -PRF 1000010 00 -1 ----- 0-- --- ----- 0 ---- +PRF_ns 1000010 00 -1 ----- 0-- --- ----- 0 ---- # SVE 32-bit gather prefetch (vector plus immediate) -PRF 1000010 -- 00 ----- 111 --- ----- 0 ---- +PRF_ns 1000010 -- 00 ----- 111 --- ----- 0 ---- # SVE contiguous prefetch (scalar plus immediate) PRF 1000010 11 1- ----- 0-- --- ----- 0 ---- @@ -XXX,XX +XXX,XX @@ LD1_zpiz 1100010 .. 01 ..... 1.. ... ..... ..... \ @rpri_g_load esz=3 # SVE 64-bit gather prefetch (scalar plus 64-bit scaled offsets) -PRF 1100010 00 11 ----- 1-- --- ----- 0 ---- +PRF_ns 1100010 00 11 ----- 1-- --- ----- 0 ---- # SVE 64-bit gather prefetch (scalar plus unpacked 32-bit scaled offsets) -PRF 1100010 00 -1 ----- 0-- --- ----- 0 ---- +PRF_ns 1100010 00 -1 ----- 0-- --- ----- 0 ---- # SVE 64-bit gather prefetch (vector plus immediate) -PRF 1100010 -- 00 ----- 111 --- ----- 0 ---- +PRF_ns 1100010 -- 00 ----- 111 --- ----- 0 ---- ### SVE Memory Store Group diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_PRF_rr(DisasContext *s, arg_PRF_rr *a) return true; } +static bool trans_PRF_ns(DisasContext *s, arg_PRF_ns *a) +{ + if (!dc_isar_feature(aa64_sve, s)) { + return false; + } + /* Prefetch is a nop within QEMU. */ + s->is_nonstreaming = true; + (void)sve_access_check(s); + return true; +} + /* * Move Prefix * -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 2 -- target/arm/translate-sve.c | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 1010 010- ---- ---- 011- ---- ---- ---- # SVE contiguous FF load (scalar+scalar) -FAIL 1010 010- ---1 ---- 101- ---- ---- ---- # SVE contiguous NF load (scalar+imm) FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDFF1_zprr(DisasContext *s, arg_rprr_load *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype)); @@ -XXX,XX +XXX,XX @@ static bool trans_LDNF1_zpri(DisasContext *s, arg_rpri_load *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (sve_access_check(s)) { int vsz = vec_full_reg_size(s); int elements = vsz >> dtype_esz[a->dtype]; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 3 --- target/arm/translate-sve.c | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --0- ---- ---- ---- ---- ---- # Load/store FP register (unscaled imm) # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) - -FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) -FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1RO_zprr(DisasContext *s, arg_rprr_load *a) if (a->rm == 31) { return false; } + s->is_nonstreaming = true; if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype)); @@ -XXX,XX +XXX,XX @@ static bool trans_LD1RO_zpri(DisasContext *s, arg_rpri_load *a) if (!dc_isar_feature(aa64_sve_f64mm, s)) { return false; } + s->is_nonstreaming = true; if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn), a->imm * 32); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> These functions will be used to verify that the cpu is in the correct state for a given instruction. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 21 +++++++++++++++++++++ target/arm/translate-a64.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ void write_fp_dreg(DisasContext *s, int reg, TCGv_i64 v); bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, unsigned int imms, unsigned int immr); bool sve_access_check(DisasContext *s); +bool sme_enabled_check(DisasContext *s); +bool sme_enabled_check_with_svcr(DisasContext *s, unsigned); + +/* This function corresponds to CheckStreamingSVEEnabled. */ +static inline bool sme_sm_enabled_check(DisasContext *s) +{ + return sme_enabled_check_with_svcr(s, R_SVCR_SM_MASK); +} + +/* This function corresponds to CheckSMEAndZAEnabled. */ +static inline bool sme_za_enabled_check(DisasContext *s) +{ + return sme_enabled_check_with_svcr(s, R_SVCR_ZA_MASK); +} + +/* Note that this function corresponds to CheckStreamingSVEAndZAEnabled. */ +static inline bool sme_smza_enabled_check(DisasContext *s) +{ + return sme_enabled_check_with_svcr(s, R_SVCR_SM_MASK | R_SVCR_ZA_MASK); +} + TCGv_i64 clean_data_tbi(DisasContext *s, TCGv_i64 addr); TCGv_i64 gen_mte_check1(DisasContext *s, TCGv_i64 addr, bool is_write, bool tag_checked, int log2_size); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool sme_access_check(DisasContext *s) return true; } +/* This function corresponds to CheckSMEEnabled. */ +bool sme_enabled_check(DisasContext *s) +{ + /* + * Note that unlike sve_excp_el, we have not constrained sme_excp_el + * to be zero when fp_excp_el has priority. This is because we need + * sme_excp_el by itself for cpregs access checks. + */ + if (!s->fp_excp_el || s->sme_excp_el < s->fp_excp_el) { + s->fp_access_checked = true; + return sme_access_check(s); + } + return fp_access_check_only(s); +} + +/* Common subroutine for CheckSMEAnd*Enabled. */ +bool sme_enabled_check_with_svcr(DisasContext *s, unsigned req) +{ + if (!sme_enabled_check(s)) { + return false; + } + if (FIELD_EX64(req, SVCR, SM) && !s->pstate_sm) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_smetrap(SME_ET_NotStreaming, false)); + return false; + } + if (FIELD_EX64(req, SVCR, ZA) && !s->pstate_za) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_smetrap(SME_ET_InactiveZA, false)); + return false; + } + return true; +} + /* * This utility function is for doing register extension with an * optional shift. You will likely want to pass a temporary for the -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The pseudocode for CheckSVEEnabled gains a check for Streaming SVE mode, and for SME present but SVE absent. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool fp_access_check(DisasContext *s) return true; } -/* Check that SVE access is enabled. If it is, return true. +/* + * Check that SVE access is enabled. If it is, return true. * If not, emit code to generate an appropriate exception and return false. + * This function corresponds to CheckSVEEnabled(). */ bool sve_access_check(DisasContext *s) { - if (s->sve_excp_el) { - assert(!s->sve_access_checked); - s->sve_access_checked = true; - + if (s->pstate_sm || !dc_isar_feature(aa64_sve, s)) { + assert(dc_isar_feature(aa64_sme, s)); + if (!sme_sm_enabled_check(s)) { + goto fail_exit; + } + } else if (s->sve_excp_el) { gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, syn_sve_access_trap(), s->sve_excp_el); - return false; + goto fail_exit; } s->sve_access_checked = true; return fp_access_check(s); + + fail_exit: + /* Assert that we only raise one exception per instruction. */ + assert(!s->sve_access_checked); + s->sve_access_checked = true; + return false; } /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> These SME instructions are nominally within the SVE decode space, so we add them to sve.decode and translate-sve.c. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 12 ++++++++++++ target/arm/sve.decode | 5 ++++- target/arm/translate-sve.c | 38 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 54 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int vec_full_reg_size(DisasContext *s) return s->vl; } +/* Return the byte size of the vector register, SVL / 8. */ +static inline int streaming_vec_reg_size(DisasContext *s) +{ + return s->svl; +} + /* * Return the offset info CPUARMState of the predicate vector register Pn. * Note for this purpose, FFR is P16. @@ -XXX,XX +XXX,XX @@ static inline int pred_full_reg_size(DisasContext *s) return s->vl >> 3; } +/* Return the byte size of the predicate register, SVL / 64. */ +static inline int streaming_pred_reg_size(DisasContext *s) +{ + return s->svl >> 3; +} + /* * Round up the size of a register to a size allowed by * the tcg vector infrastructure. Any operation which uses this diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ INDEX_ri 00000100 esz:2 1 imm:s5 010001 rn:5 rd:5 # SVE index generation (register start, register increment) INDEX_rr 00000100 .. 1 ..... 010011 ..... ..... @rd_rn_rm -### SVE Stack Allocation Group +### SVE / Streaming SVE Stack Allocation Group # SVE stack frame adjustment ADDVL 00000100 001 ..... 01010 ...... ..... @rd_rn_i6 +ADDSVL 00000100 001 ..... 01011 ...... ..... @rd_rn_i6 ADDPL 00000100 011 ..... 01010 ...... ..... @rd_rn_i6 +ADDSPL 00000100 011 ..... 01011 ...... ..... @rd_rn_i6 # SVE stack frame size RDVL 00000100 101 11111 01010 imm:s6 rd:5 +RDSVL 00000100 101 11111 01011 imm:s6 rd:5 ### SVE Bitwise Shift - Unpredicated Group diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_ADDVL(DisasContext *s, arg_ADDVL *a) return true; } +static bool trans_ADDSVL(DisasContext *s, arg_ADDSVL *a) +{ + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (sme_enabled_check(s)) { + TCGv_i64 rd = cpu_reg_sp(s, a->rd); + TCGv_i64 rn = cpu_reg_sp(s, a->rn); + tcg_gen_addi_i64(rd, rn, a->imm * streaming_vec_reg_size(s)); + } + return true; +} + static bool trans_ADDPL(DisasContext *s, arg_ADDPL *a) { if (!dc_isar_feature(aa64_sve, s)) { @@ -XXX,XX +XXX,XX @@ static bool trans_ADDPL(DisasContext *s, arg_ADDPL *a) return true; } +static bool trans_ADDSPL(DisasContext *s, arg_ADDSPL *a) +{ + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (sme_enabled_check(s)) { + TCGv_i64 rd = cpu_reg_sp(s, a->rd); + TCGv_i64 rn = cpu_reg_sp(s, a->rn); + tcg_gen_addi_i64(rd, rn, a->imm * streaming_pred_reg_size(s)); + } + return true; +} + static bool trans_RDVL(DisasContext *s, arg_RDVL *a) { if (!dc_isar_feature(aa64_sve, s)) { @@ -XXX,XX +XXX,XX @@ static bool trans_RDVL(DisasContext *s, arg_RDVL *a) return true; } +static bool trans_RDSVL(DisasContext *s, arg_RDSVL *a) +{ + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (sme_enabled_check(s)) { + TCGv_i64 reg = cpu_reg(s, a->rd); + tcg_gen_movi_i64(reg, a->imm * streaming_vec_reg_size(s)); + } + return true; +} + /* *** SVE Compute Vector Address Group */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 2 ++ target/arm/sme.decode | 4 ++++ target/arm/sme_helper.c | 25 +++++++++++++++++++++++++ target/arm/translate-sme.c | 13 +++++++++++++ 4 files changed, 44 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(set_pstate_sm, TCG_CALL_NO_RWG, void, env, i32) DEF_HELPER_FLAGS_2(set_pstate_za, TCG_CALL_NO_RWG, void, env, i32) + +DEF_HELPER_FLAGS_3(sme_zero, TCG_CALL_NO_RWG, void, env, i32, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ # # This file is processed by scripts/decodetree.py # + +### SME Misc + +ZERO 11000000 00 001 00000000000 imm:8 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ void helper_set_pstate_za(CPUARMState *env, uint32_t i) memset(env->zarray, 0, sizeof(env->zarray)); } } + +void helper_sme_zero(CPUARMState *env, uint32_t imm, uint32_t svl) +{ + uint32_t i; + + /* + * Special case clearing the entire ZA space. + * This falls into the CONSTRAINED UNPREDICTABLE zeroing of any + * parts of the ZA storage outside of SVL. + */ + if (imm == 0xff) { + memset(env->zarray, 0, sizeof(env->zarray)); + return; + } + + /* + * Recall that ZAnH.D[m] is spread across ZA[n+8*m], + * so each row is discontiguous within ZA[]. + */ + for (i = 0; i < svl; i++) { + if (imm & (1 << (i % 8))) { + memset(&env->zarray[i], 0, svl); + } + } +} diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ */ #include "decode-sme.c.inc" + + +static bool trans_ZERO(DisasContext *s, arg_ZERO *a) +{ + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (sme_za_enabled_check(s)) { + gen_helper_sme_zero(cpu_env, tcg_constant_i32(a->imm), + tcg_constant_i32(streaming_vec_reg_size(s))); + } + return true; +} -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We can reuse the SVE functions for implementing moves to/from horizontal tile slices, but we need new ones for moves to/from vertical tile slices. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 12 +++ target/arm/helper-sve.h | 2 + target/arm/translate-a64.h | 8 ++ target/arm/translate.h | 5 ++ target/arm/sme.decode | 15 ++++ target/arm/sme_helper.c | 151 ++++++++++++++++++++++++++++++++++++- target/arm/sve_helper.c | 12 +++ target/arm/translate-sme.c | 127 +++++++++++++++++++++++++++++++ 8 files changed, 331 insertions(+), 1 deletion(-) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(set_pstate_sm, TCG_CALL_NO_RWG, void, env, i32) DEF_HELPER_FLAGS_2(set_pstate_za, TCG_CALL_NO_RWG, void, env, i32) DEF_HELPER_FLAGS_3(sme_zero, TCG_CALL_NO_RWG, void, env, i32, i32) + +/* Move to/from vertical array slices, i.e. columns, so 'c'. */ +DEF_HELPER_FLAGS_4(sme_mova_cz_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_cz_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_cz_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_cz_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_cz_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_sel_zpzz_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_sel_zpzz_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_sel_zpzz_q, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve2_addp_zpzz_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } +/* Return a newly allocated pointer to the predicate register. */ +static inline TCGv_ptr pred_full_reg_ptr(DisasContext *s, int regno) +{ + TCGv_ptr ret = tcg_temp_new_ptr(); + tcg_gen_addi_ptr(ret, cpu_env, pred_full_reg_offset(s, regno)); + return ret; +} + bool disas_sve(DisasContext *, uint32_t); bool disas_sme(DisasContext *, uint32_t); diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline int plus_2(DisasContext *s, int x) return x + 2; } +static inline int plus_12(DisasContext *s, int x) +{ + return x + 12; +} + static inline int times_2(DisasContext *s, int x) { return x * 2; diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ ### SME Misc ZERO 11000000 00 001 00000000000 imm:8 + +### SME Move into/from Array + +%mova_rs 13:2 !function=plus_12 +&mova esz rs pg zr za_imm v:bool to_vec:bool + +MOVA 11000000 esz:2 00000 0 v:1 .. pg:3 zr:5 0 za_imm:4 \ + &mova to_vec=0 rs=%mova_rs +MOVA 11000000 11 00000 1 v:1 .. pg:3 zr:5 0 za_imm:4 \ + &mova to_vec=0 rs=%mova_rs esz=4 + +MOVA 11000000 esz:2 00001 0 v:1 .. pg:3 0 za_imm:4 zr:5 \ + &mova to_vec=1 rs=%mova_rs +MOVA 11000000 11 00001 1 v:1 .. pg:3 0 za_imm:4 zr:5 \ + &mova to_vec=1 rs=%mova_rs esz=4 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "cpu.h" -#include "internals.h" +#include "tcg/tcg-gvec-desc.h" #include "exec/helper-proto.h" +#include "qemu/int128.h" +#include "vec_internal.h" /* ResetSVEState */ void arm_reset_sve_state(CPUARMState *env) @@ -XXX,XX +XXX,XX @@ void helper_sme_zero(CPUARMState *env, uint32_t imm, uint32_t svl) } } } + + +/* + * When considering the ZA storage as an array of elements of + * type T, the index within that array of the Nth element of + * a vertical slice of a tile can be calculated like this, + * regardless of the size of type T. This is because the tiles + * are interleaved, so if type T is size N bytes then row 1 of + * the tile is N rows away from row 0. The division by N to + * convert a byte offset into an array index and the multiplication + * by N to convert from vslice-index-within-the-tile to + * the index within the ZA storage cancel out. + */ +#define tile_vslice_index(i) ((i) * sizeof(ARMVectorReg)) + +/* + * When doing byte arithmetic on the ZA storage, the element + * byteoff bytes away in a tile vertical slice is always this + * many bytes away in the ZA storage, regardless of the + * size of the tile element, assuming that byteoff is a multiple + * of the element size. Again this is because of the interleaving + * of the tiles. For instance if we have 1 byte per element then + * each row of the ZA storage has one byte of the vslice data, + * and (counting from 0) byte 8 goes in row 8 of the storage + * at offset (8 * row-size-in-bytes). + * If we have 8 bytes per element then each row of the ZA storage + * has 8 bytes of the data, but there are 8 interleaved tiles and + * so byte 8 of the data goes into row 1 of the tile, + * which is again row 8 of the storage, so the offset is still + * (8 * row-size-in-bytes). Similarly for other element sizes. + */ +#define tile_vslice_offset(byteoff) ((byteoff) * sizeof(ARMVectorReg)) + + +/* + * Move Zreg vector to ZArray column. + */ +#define DO_MOVA_C(NAME, TYPE, H) \ +void HELPER(NAME)(void *za, void *vn, void *vg, uint32_t desc) \ +{ \ + int i, oprsz = simd_oprsz(desc); \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (pg & 1) { \ + *(TYPE *)(za + tile_vslice_offset(i)) = *(TYPE *)(vn + H(i)); \ + } \ + i += sizeof(TYPE); \ + pg >>= sizeof(TYPE); \ + } while (i & 15); \ + } \ +} + +DO_MOVA_C(sme_mova_cz_b, uint8_t, H1) +DO_MOVA_C(sme_mova_cz_h, uint16_t, H1_2) +DO_MOVA_C(sme_mova_cz_s, uint32_t, H1_4) + +void HELPER(sme_mova_cz_d)(void *za, void *vn, void *vg, uint32_t desc) +{ + int i, oprsz = simd_oprsz(desc) / 8; + uint8_t *pg = vg; + uint64_t *n = vn; + uint64_t *a = za; + + for (i = 0; i < oprsz; i++) { + if (pg[H1(i)] & 1) { + a[tile_vslice_index(i)] = n[i]; + } + } +} + +void HELPER(sme_mova_cz_q)(void *za, void *vn, void *vg, uint32_t desc) +{ + int i, oprsz = simd_oprsz(desc) / 16; + uint16_t *pg = vg; + Int128 *n = vn; + Int128 *a = za; + + /* + * Int128 is used here simply to copy 16 bytes, and to simplify + * the address arithmetic. + */ + for (i = 0; i < oprsz; i++) { + if (pg[H2(i)] & 1) { + a[tile_vslice_index(i)] = n[i]; + } + } +} + +#undef DO_MOVA_C + +/* + * Move ZArray column to Zreg vector. + */ +#define DO_MOVA_Z(NAME, TYPE, H) \ +void HELPER(NAME)(void *vd, void *za, void *vg, uint32_t desc) \ +{ \ + int i, oprsz = simd_oprsz(desc); \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (pg & 1) { \ + *(TYPE *)(vd + H(i)) = *(TYPE *)(za + tile_vslice_offset(i)); \ + } \ + i += sizeof(TYPE); \ + pg >>= sizeof(TYPE); \ + } while (i & 15); \ + } \ +} + +DO_MOVA_Z(sme_mova_zc_b, uint8_t, H1) +DO_MOVA_Z(sme_mova_zc_h, uint16_t, H1_2) +DO_MOVA_Z(sme_mova_zc_s, uint32_t, H1_4) + +void HELPER(sme_mova_zc_d)(void *vd, void *za, void *vg, uint32_t desc) +{ + int i, oprsz = simd_oprsz(desc) / 8; + uint8_t *pg = vg; + uint64_t *d = vd; + uint64_t *a = za; + + for (i = 0; i < oprsz; i++) { + if (pg[H1(i)] & 1) { + d[i] = a[tile_vslice_index(i)]; + } + } +} + +void HELPER(sme_mova_zc_q)(void *vd, void *za, void *vg, uint32_t desc) +{ + int i, oprsz = simd_oprsz(desc) / 16; + uint16_t *pg = vg; + Int128 *d = vd; + Int128 *a = za; + + /* + * Int128 is used here simply to copy 16 bytes, and to simplify + * the address arithmetic. + */ + for (i = 0; i < oprsz; i++, za += sizeof(ARMVectorReg)) { + if (pg[H2(i)] & 1) { + d[i] = a[tile_vslice_index(i)]; + } + } +} + +#undef DO_MOVA_Z diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_sel_zpzz_d)(void *vd, void *vn, void *vm, } } +void HELPER(sve_sel_zpzz_q)(void *vd, void *vn, void *vm, + void *vg, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc) / 16; + Int128 *d = vd, *n = vn, *m = vm; + uint16_t *pg = vg; + + for (i = 0; i < opr_sz; i += 1) { + d[i] = (pg[H2(i)] & 1 ? n : m)[i]; + } +} + /* Two operand comparison controlled by a predicate. * ??? It is very tempting to want to be able to expand this inline * with x86 instructions, e.g. diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ #include "decode-sme.c.inc" +/* + * Resolve tile.size[index] to a host pointer, where tile and index + * are always decoded together, dependent on the element size. + */ +static TCGv_ptr get_tile_rowcol(DisasContext *s, int esz, int rs, + int tile_index, bool vertical) +{ + int tile = tile_index >> (4 - esz); + int index = esz == MO_128 ? 0 : extract32(tile_index, 0, 4 - esz); + int pos, len, offset; + TCGv_i32 tmp; + TCGv_ptr addr; + + /* Compute the final index, which is Rs+imm. */ + tmp = tcg_temp_new_i32(); + tcg_gen_trunc_tl_i32(tmp, cpu_reg(s, rs)); + tcg_gen_addi_i32(tmp, tmp, index); + + /* Prepare a power-of-two modulo via extraction of @len bits. */ + len = ctz32(streaming_vec_reg_size(s)) - esz; + + if (vertical) { + /* + * Compute the byte offset of the index within the tile: + * (index % (svl / size)) * size + * = (index % (svl >> esz)) << esz + * Perform the power-of-two modulo via extraction of the low @len bits. + * Perform the multiply by shifting left by @pos bits. + * Perform these operations simultaneously via deposit into zero. + */ + pos = esz; + tcg_gen_deposit_z_i32(tmp, tmp, pos, len); + + /* + * For big-endian, adjust the indexed column byte offset within + * the uint64_t host words that make up env->zarray[]. + */ + if (HOST_BIG_ENDIAN && esz < MO_64) { + tcg_gen_xori_i32(tmp, tmp, 8 - (1 << esz)); + } + } else { + /* + * Compute the byte offset of the index within the tile: + * (index % (svl / size)) * (size * sizeof(row)) + * = (index % (svl >> esz)) << (esz + log2(sizeof(row))) + */ + pos = esz + ctz32(sizeof(ARMVectorReg)); + tcg_gen_deposit_z_i32(tmp, tmp, pos, len); + + /* Row slices are always aligned and need no endian adjustment. */ + } + + /* The tile byte offset within env->zarray is the row. */ + offset = tile * sizeof(ARMVectorReg); + + /* Include the byte offset of zarray to make this relative to env. */ + offset += offsetof(CPUARMState, zarray); + tcg_gen_addi_i32(tmp, tmp, offset); + + /* Add the byte offset to env to produce the final pointer. */ + addr = tcg_temp_new_ptr(); + tcg_gen_ext_i32_ptr(addr, tmp); + tcg_temp_free_i32(tmp); + tcg_gen_add_ptr(addr, addr, cpu_env); + + return addr; +} + static bool trans_ZERO(DisasContext *s, arg_ZERO *a) { if (!dc_isar_feature(aa64_sme, s)) { @@ -XXX,XX +XXX,XX @@ static bool trans_ZERO(DisasContext *s, arg_ZERO *a) } return true; } + +static bool trans_MOVA(DisasContext *s, arg_MOVA *a) +{ + static gen_helper_gvec_4 * const h_fns[5] = { + gen_helper_sve_sel_zpzz_b, gen_helper_sve_sel_zpzz_h, + gen_helper_sve_sel_zpzz_s, gen_helper_sve_sel_zpzz_d, + gen_helper_sve_sel_zpzz_q + }; + static gen_helper_gvec_3 * const cz_fns[5] = { + gen_helper_sme_mova_cz_b, gen_helper_sme_mova_cz_h, + gen_helper_sme_mova_cz_s, gen_helper_sme_mova_cz_d, + gen_helper_sme_mova_cz_q, + }; + static gen_helper_gvec_3 * const zc_fns[5] = { + gen_helper_sme_mova_zc_b, gen_helper_sme_mova_zc_h, + gen_helper_sme_mova_zc_s, gen_helper_sme_mova_zc_d, + gen_helper_sme_mova_zc_q, + }; + + TCGv_ptr t_za, t_zr, t_pg; + TCGv_i32 t_desc; + int svl; + + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (!sme_smza_enabled_check(s)) { + return true; + } + + t_za = get_tile_rowcol(s, a->esz, a->rs, a->za_imm, a->v); + t_zr = vec_full_reg_ptr(s, a->zr); + t_pg = pred_full_reg_ptr(s, a->pg); + + svl = streaming_vec_reg_size(s); + t_desc = tcg_constant_i32(simd_desc(svl, svl, 0)); + + if (a->v) { + /* Vertical slice -- use sme mova helpers. */ + if (a->to_vec) { + zc_fns[a->esz](t_zr, t_za, t_pg, t_desc); + } else { + cz_fns[a->esz](t_za, t_zr, t_pg, t_desc); + } + } else { + /* Horizontal slice -- reuse sve sel helpers. */ + if (a->to_vec) { + h_fns[a->esz](t_zr, t_za, t_zr, t_pg, t_desc); + } else { + h_fns[a->esz](t_za, t_zr, t_za, t_pg, t_desc); + } + } + + tcg_temp_free_ptr(t_za); + tcg_temp_free_ptr(t_zr); + tcg_temp_free_ptr(t_pg); + + return true; +} -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We cannot reuse the SVE functions for LD[1-4] and ST[1-4], because those functions accept only a Zreg register number. For SME, we want to pass a pointer into ZA storage. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 82 +++++ target/arm/sme.decode | 9 + target/arm/sme_helper.c | 595 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 70 +++++ 4 files changed, 756 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sme_mova_cz_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sme_mova_zc_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sme_mova_cz_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sme_mova_zc_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sme_ld1b_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1b_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1b_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1b_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_ld1h_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_ld1s_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_ld1d_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_ld1q_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1b_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1b_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1b_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1b_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1h_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1s_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1d_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1q_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ MOVA 11000000 esz:2 00001 0 v:1 .. pg:3 0 za_imm:4 zr:5 \ &mova to_vec=1 rs=%mova_rs MOVA 11000000 11 00001 1 v:1 .. pg:3 0 za_imm:4 zr:5 \ &mova to_vec=1 rs=%mova_rs esz=4 + +### SME Memory + +&ldst esz rs pg rn rm za_imm v:bool st:bool + +LDST1 1110000 0 esz:2 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ + &ldst rs=%mova_rs +LDST1 1110000 111 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ + &ldst esz=4 rs=%mova_rs diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "cpu.h" +#include "internals.h" #include "tcg/tcg-gvec-desc.h" #include "exec/helper-proto.h" +#include "exec/cpu_ldst.h" +#include "exec/exec-all.h" #include "qemu/int128.h" #include "vec_internal.h" +#include "sve_ldst_internal.h" /* ResetSVEState */ void arm_reset_sve_state(CPUARMState *env) @@ -XXX,XX +XXX,XX @@ void HELPER(sme_mova_zc_q)(void *vd, void *za, void *vg, uint32_t desc) } #undef DO_MOVA_Z + +/* + * Clear elements in a tile slice comprising len bytes. + */ + +typedef void ClearFn(void *ptr, size_t off, size_t len); + +static void clear_horizontal(void *ptr, size_t off, size_t len) +{ + memset(ptr + off, 0, len); +} + +static void clear_vertical_b(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; ++i) { + *(uint8_t *)(vptr + tile_vslice_offset(i + off)) = 0; + } +} + +static void clear_vertical_h(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; i += 2) { + *(uint16_t *)(vptr + tile_vslice_offset(i + off)) = 0; + } +} + +static void clear_vertical_s(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; i += 4) { + *(uint32_t *)(vptr + tile_vslice_offset(i + off)) = 0; + } +} + +static void clear_vertical_d(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; i += 8) { + *(uint64_t *)(vptr + tile_vslice_offset(i + off)) = 0; + } +} + +static void clear_vertical_q(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; i += 16) { + memset(vptr + tile_vslice_offset(i + off), 0, 16); + } +} + +/* + * Copy elements from an array into a tile slice comprising len bytes. + */ + +typedef void CopyFn(void *dst, const void *src, size_t len); + +static void copy_horizontal(void *dst, const void *src, size_t len) +{ + memcpy(dst, src, len); +} + +static void copy_vertical_b(void *vdst, const void *vsrc, size_t len) +{ + const uint8_t *src = vsrc; + uint8_t *dst = vdst; + size_t i; + + for (i = 0; i < len; ++i) { + dst[tile_vslice_index(i)] = src[i]; + } +} + +static void copy_vertical_h(void *vdst, const void *vsrc, size_t len) +{ + const uint16_t *src = vsrc; + uint16_t *dst = vdst; + size_t i; + + for (i = 0; i < len / 2; ++i) { + dst[tile_vslice_index(i)] = src[i]; + } +} + +static void copy_vertical_s(void *vdst, const void *vsrc, size_t len) +{ + const uint32_t *src = vsrc; + uint32_t *dst = vdst; + size_t i; + + for (i = 0; i < len / 4; ++i) { + dst[tile_vslice_index(i)] = src[i]; + } +} + +static void copy_vertical_d(void *vdst, const void *vsrc, size_t len) +{ + const uint64_t *src = vsrc; + uint64_t *dst = vdst; + size_t i; + + for (i = 0; i < len / 8; ++i) { + dst[tile_vslice_index(i)] = src[i]; + } +} + +static void copy_vertical_q(void *vdst, const void *vsrc, size_t len) +{ + for (size_t i = 0; i < len; i += 16) { + memcpy(vdst + tile_vslice_offset(i), vsrc + i, 16); + } +} + +/* + * Host and TLB primitives for vertical tile slice addressing. + */ + +#define DO_LD(NAME, TYPE, HOST, TLB) \ +static inline void sme_##NAME##_v_host(void *za, intptr_t off, void *host) \ +{ \ + TYPE val = HOST(host); \ + *(TYPE *)(za + tile_vslice_offset(off)) = val; \ +} \ +static inline void sme_##NAME##_v_tlb(CPUARMState *env, void *za, \ + intptr_t off, target_ulong addr, uintptr_t ra) \ +{ \ + TYPE val = TLB(env, useronly_clean_ptr(addr), ra); \ + *(TYPE *)(za + tile_vslice_offset(off)) = val; \ +} + +#define DO_ST(NAME, TYPE, HOST, TLB) \ +static inline void sme_##NAME##_v_host(void *za, intptr_t off, void *host) \ +{ \ + TYPE val = *(TYPE *)(za + tile_vslice_offset(off)); \ + HOST(host, val); \ +} \ +static inline void sme_##NAME##_v_tlb(CPUARMState *env, void *za, \ + intptr_t off, target_ulong addr, uintptr_t ra) \ +{ \ + TYPE val = *(TYPE *)(za + tile_vslice_offset(off)); \ + TLB(env, useronly_clean_ptr(addr), val, ra); \ +} + +/* + * The ARMVectorReg elements are stored in host-endian 64-bit units. + * For 128-bit quantities, the sequence defined by the Elem[] pseudocode + * corresponds to storing the two 64-bit pieces in little-endian order. + */ +#define DO_LDQ(HNAME, VNAME, BE, HOST, TLB) \ +static inline void HNAME##_host(void *za, intptr_t off, void *host) \ +{ \ + uint64_t val0 = HOST(host), val1 = HOST(host + 8); \ + uint64_t *ptr = za + off; \ + ptr[0] = BE ? val1 : val0, ptr[1] = BE ? val0 : val1; \ +} \ +static inline void VNAME##_v_host(void *za, intptr_t off, void *host) \ +{ \ + HNAME##_host(za, tile_vslice_offset(off), host); \ +} \ +static inline void HNAME##_tlb(CPUARMState *env, void *za, intptr_t off, \ + target_ulong addr, uintptr_t ra) \ +{ \ + uint64_t val0 = TLB(env, useronly_clean_ptr(addr), ra); \ + uint64_t val1 = TLB(env, useronly_clean_ptr(addr + 8), ra); \ + uint64_t *ptr = za + off; \ + ptr[0] = BE ? val1 : val0, ptr[1] = BE ? val0 : val1; \ +} \ +static inline void VNAME##_v_tlb(CPUARMState *env, void *za, intptr_t off, \ + target_ulong addr, uintptr_t ra) \ +{ \ + HNAME##_tlb(env, za, tile_vslice_offset(off), addr, ra); \ +} + +#define DO_STQ(HNAME, VNAME, BE, HOST, TLB) \ +static inline void HNAME##_host(void *za, intptr_t off, void *host) \ +{ \ + uint64_t *ptr = za + off; \ + HOST(host, ptr[BE]); \ + HOST(host + 1, ptr[!BE]); \ +} \ +static inline void VNAME##_v_host(void *za, intptr_t off, void *host) \ +{ \ + HNAME##_host(za, tile_vslice_offset(off), host); \ +} \ +static inline void HNAME##_tlb(CPUARMState *env, void *za, intptr_t off, \ + target_ulong addr, uintptr_t ra) \ +{ \ + uint64_t *ptr = za + off; \ + TLB(env, useronly_clean_ptr(addr), ptr[BE], ra); \ + TLB(env, useronly_clean_ptr(addr + 8), ptr[!BE], ra); \ +} \ +static inline void VNAME##_v_tlb(CPUARMState *env, void *za, intptr_t off, \ + target_ulong addr, uintptr_t ra) \ +{ \ + HNAME##_tlb(env, za, tile_vslice_offset(off), addr, ra); \ +} + +DO_LD(ld1b, uint8_t, ldub_p, cpu_ldub_data_ra) +DO_LD(ld1h_be, uint16_t, lduw_be_p, cpu_lduw_be_data_ra) +DO_LD(ld1h_le, uint16_t, lduw_le_p, cpu_lduw_le_data_ra) +DO_LD(ld1s_be, uint32_t, ldl_be_p, cpu_ldl_be_data_ra) +DO_LD(ld1s_le, uint32_t, ldl_le_p, cpu_ldl_le_data_ra) +DO_LD(ld1d_be, uint64_t, ldq_be_p, cpu_ldq_be_data_ra) +DO_LD(ld1d_le, uint64_t, ldq_le_p, cpu_ldq_le_data_ra) + +DO_LDQ(sve_ld1qq_be, sme_ld1q_be, 1, ldq_be_p, cpu_ldq_be_data_ra) +DO_LDQ(sve_ld1qq_le, sme_ld1q_le, 0, ldq_le_p, cpu_ldq_le_data_ra) + +DO_ST(st1b, uint8_t, stb_p, cpu_stb_data_ra) +DO_ST(st1h_be, uint16_t, stw_be_p, cpu_stw_be_data_ra) +DO_ST(st1h_le, uint16_t, stw_le_p, cpu_stw_le_data_ra) +DO_ST(st1s_be, uint32_t, stl_be_p, cpu_stl_be_data_ra) +DO_ST(st1s_le, uint32_t, stl_le_p, cpu_stl_le_data_ra) +DO_ST(st1d_be, uint64_t, stq_be_p, cpu_stq_be_data_ra) +DO_ST(st1d_le, uint64_t, stq_le_p, cpu_stq_le_data_ra) + +DO_STQ(sve_st1qq_be, sme_st1q_be, 1, stq_be_p, cpu_stq_be_data_ra) +DO_STQ(sve_st1qq_le, sme_st1q_le, 0, stq_le_p, cpu_stq_le_data_ra) + +#undef DO_LD +#undef DO_ST +#undef DO_LDQ +#undef DO_STQ + +/* + * Common helper for all contiguous predicated loads. + */ + +static inline QEMU_ALWAYS_INLINE +void sme_ld1(CPUARMState *env, void *za, uint64_t *vg, + const target_ulong addr, uint32_t desc, const uintptr_t ra, + const int esz, uint32_t mtedesc, bool vertical, + sve_ldst1_host_fn *host_fn, + sve_ldst1_tlb_fn *tlb_fn, + ClearFn *clr_fn, + CopyFn *cpy_fn) +{ + const intptr_t reg_max = simd_oprsz(desc); + const intptr_t esize = 1 << esz; + intptr_t reg_off, reg_last; + SVEContLdSt info; + void *host; + int flags; + + /* Find the active elements. */ + if (!sve_cont_ldst_elements(&info, addr, vg, reg_max, esz, esize)) { + /* The entire predicate was false; no load occurs. */ + clr_fn(za, 0, reg_max); + return; + } + + /* Probe the page(s). Exit with exception for any invalid page. */ + sve_cont_ldst_pages(&info, FAULT_ALL, env, addr, MMU_DATA_LOAD, ra); + + /* Handle watchpoints for all active elements. */ + sve_cont_ldst_watchpoints(&info, env, vg, addr, esize, esize, + BP_MEM_READ, ra); + + /* + * Handle mte checks for all active elements. + * Since TBI must be set for MTE, !mtedesc => !mte_active. + */ + if (mtedesc) { + sve_cont_ldst_mte_check(&info, env, vg, addr, esize, esize, + mtedesc, ra); + } + + flags = info.page[0].flags | info.page[1].flags; + if (unlikely(flags != 0)) { +#ifdef CONFIG_USER_ONLY + g_assert_not_reached(); +#else + /* + * At least one page includes MMIO. + * Any bus operation can fail with cpu_transaction_failed, + * which for ARM will raise SyncExternal. Perform the load + * into scratch memory to preserve register state until the end. + */ + ARMVectorReg scratch = { }; + + reg_off = info.reg_off_first[0]; + reg_last = info.reg_off_last[1]; + if (reg_last < 0) { + reg_last = info.reg_off_split; + if (reg_last < 0) { + reg_last = info.reg_off_last[0]; + } + } + + do { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + tlb_fn(env, &scratch, reg_off, addr + reg_off, ra); + } + reg_off += esize; + } while (reg_off & 63); + } while (reg_off <= reg_last); + + cpy_fn(za, &scratch, reg_max); + return; +#endif + } + + /* The entire operation is in RAM, on valid pages. */ + + reg_off = info.reg_off_first[0]; + reg_last = info.reg_off_last[0]; + host = info.page[0].host; + + if (!vertical) { + memset(za, 0, reg_max); + } else if (reg_off) { + clr_fn(za, 0, reg_off); + } + + while (reg_off <= reg_last) { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + host_fn(za, reg_off, host + reg_off); + } else if (vertical) { + clr_fn(za, reg_off, esize); + } + reg_off += esize; + } while (reg_off <= reg_last && (reg_off & 63)); + } + + /* + * Use the slow path to manage the cross-page misalignment. + * But we know this is RAM and cannot trap. + */ + reg_off = info.reg_off_split; + if (unlikely(reg_off >= 0)) { + tlb_fn(env, za, reg_off, addr + reg_off, ra); + } + + reg_off = info.reg_off_first[1]; + if (unlikely(reg_off >= 0)) { + reg_last = info.reg_off_last[1]; + host = info.page[1].host; + + do { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + host_fn(za, reg_off, host + reg_off); + } else if (vertical) { + clr_fn(za, reg_off, esize); + } + reg_off += esize; + } while (reg_off & 63); + } while (reg_off <= reg_last); + } +} + +static inline QEMU_ALWAYS_INLINE +void sme_ld1_mte(CPUARMState *env, void *za, uint64_t *vg, + target_ulong addr, uint32_t desc, uintptr_t ra, + const int esz, bool vertical, + sve_ldst1_host_fn *host_fn, + sve_ldst1_tlb_fn *tlb_fn, + ClearFn *clr_fn, + CopyFn *cpy_fn) +{ + uint32_t mtedesc = desc >> (SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); + int bit55 = extract64(addr, 55, 1); + + /* Remove mtedesc from the normal sve descriptor. */ + desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); + + /* Perform gross MTE suppression early. */ + if (!tbi_check(desc, bit55) || + tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + mtedesc = 0; + } + + sme_ld1(env, za, vg, addr, desc, ra, esz, mtedesc, vertical, + host_fn, tlb_fn, clr_fn, cpy_fn); +} + +#define DO_LD(L, END, ESZ) \ +void HELPER(sme_ld1##L##END##_h)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_ld1(env, za, vg, addr, desc, GETPC(), ESZ, 0, false, \ + sve_ld1##L##L##END##_host, sve_ld1##L##L##END##_tlb, \ + clear_horizontal, copy_horizontal); \ +} \ +void HELPER(sme_ld1##L##END##_v)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_ld1(env, za, vg, addr, desc, GETPC(), ESZ, 0, true, \ + sme_ld1##L##END##_v_host, sme_ld1##L##END##_v_tlb, \ + clear_vertical_##L, copy_vertical_##L); \ +} \ +void HELPER(sme_ld1##L##END##_h_mte)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_ld1_mte(env, za, vg, addr, desc, GETPC(), ESZ, false, \ + sve_ld1##L##L##END##_host, sve_ld1##L##L##END##_tlb, \ + clear_horizontal, copy_horizontal); \ +} \ +void HELPER(sme_ld1##L##END##_v_mte)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_ld1_mte(env, za, vg, addr, desc, GETPC(), ESZ, true, \ + sme_ld1##L##END##_v_host, sme_ld1##L##END##_v_tlb, \ + clear_vertical_##L, copy_vertical_##L); \ +} + +DO_LD(b, , MO_8) +DO_LD(h, _be, MO_16) +DO_LD(h, _le, MO_16) +DO_LD(s, _be, MO_32) +DO_LD(s, _le, MO_32) +DO_LD(d, _be, MO_64) +DO_LD(d, _le, MO_64) +DO_LD(q, _be, MO_128) +DO_LD(q, _le, MO_128) + +#undef DO_LD + +/* + * Common helper for all contiguous predicated stores. + */ + +static inline QEMU_ALWAYS_INLINE +void sme_st1(CPUARMState *env, void *za, uint64_t *vg, + const target_ulong addr, uint32_t desc, const uintptr_t ra, + const int esz, uint32_t mtedesc, bool vertical, + sve_ldst1_host_fn *host_fn, + sve_ldst1_tlb_fn *tlb_fn) +{ + const intptr_t reg_max = simd_oprsz(desc); + const intptr_t esize = 1 << esz; + intptr_t reg_off, reg_last; + SVEContLdSt info; + void *host; + int flags; + + /* Find the active elements. */ + if (!sve_cont_ldst_elements(&info, addr, vg, reg_max, esz, esize)) { + /* The entire predicate was false; no store occurs. */ + return; + } + + /* Probe the page(s). Exit with exception for any invalid page. */ + sve_cont_ldst_pages(&info, FAULT_ALL, env, addr, MMU_DATA_STORE, ra); + + /* Handle watchpoints for all active elements. */ + sve_cont_ldst_watchpoints(&info, env, vg, addr, esize, esize, + BP_MEM_WRITE, ra); + + /* + * Handle mte checks for all active elements. + * Since TBI must be set for MTE, !mtedesc => !mte_active. + */ + if (mtedesc) { + sve_cont_ldst_mte_check(&info, env, vg, addr, esize, esize, + mtedesc, ra); + } + + flags = info.page[0].flags | info.page[1].flags; + if (unlikely(flags != 0)) { +#ifdef CONFIG_USER_ONLY + g_assert_not_reached(); +#else + /* + * At least one page includes MMIO. + * Any bus operation can fail with cpu_transaction_failed, + * which for ARM will raise SyncExternal. We cannot avoid + * this fault and will leave with the store incomplete. + */ + reg_off = info.reg_off_first[0]; + reg_last = info.reg_off_last[1]; + if (reg_last < 0) { + reg_last = info.reg_off_split; + if (reg_last < 0) { + reg_last = info.reg_off_last[0]; + } + } + + do { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + tlb_fn(env, za, reg_off, addr + reg_off, ra); + } + reg_off += esize; + } while (reg_off & 63); + } while (reg_off <= reg_last); + return; +#endif + } + + reg_off = info.reg_off_first[0]; + reg_last = info.reg_off_last[0]; + host = info.page[0].host; + + while (reg_off <= reg_last) { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + host_fn(za, reg_off, host + reg_off); + } + reg_off += 1 << esz; + } while (reg_off <= reg_last && (reg_off & 63)); + } + + /* + * Use the slow path to manage the cross-page misalignment. + * But we know this is RAM and cannot trap. + */ + reg_off = info.reg_off_split; + if (unlikely(reg_off >= 0)) { + tlb_fn(env, za, reg_off, addr + reg_off, ra); + } + + reg_off = info.reg_off_first[1]; + if (unlikely(reg_off >= 0)) { + reg_last = info.reg_off_last[1]; + host = info.page[1].host; + + do { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + host_fn(za, reg_off, host + reg_off); + } + reg_off += 1 << esz; + } while (reg_off & 63); + } while (reg_off <= reg_last); + } +} + +static inline QEMU_ALWAYS_INLINE +void sme_st1_mte(CPUARMState *env, void *za, uint64_t *vg, target_ulong addr, + uint32_t desc, uintptr_t ra, int esz, bool vertical, + sve_ldst1_host_fn *host_fn, + sve_ldst1_tlb_fn *tlb_fn) +{ + uint32_t mtedesc = desc >> (SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); + int bit55 = extract64(addr, 55, 1); + + /* Remove mtedesc from the normal sve descriptor. */ + desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); + + /* Perform gross MTE suppression early. */ + if (!tbi_check(desc, bit55) || + tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + mtedesc = 0; + } + + sme_st1(env, za, vg, addr, desc, ra, esz, mtedesc, + vertical, host_fn, tlb_fn); +} + +#define DO_ST(L, END, ESZ) \ +void HELPER(sme_st1##L##END##_h)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_st1(env, za, vg, addr, desc, GETPC(), ESZ, 0, false, \ + sve_st1##L##L##END##_host, sve_st1##L##L##END##_tlb); \ +} \ +void HELPER(sme_st1##L##END##_v)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_st1(env, za, vg, addr, desc, GETPC(), ESZ, 0, true, \ + sme_st1##L##END##_v_host, sme_st1##L##END##_v_tlb); \ +} \ +void HELPER(sme_st1##L##END##_h_mte)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_st1_mte(env, za, vg, addr, desc, GETPC(), ESZ, false, \ + sve_st1##L##L##END##_host, sve_st1##L##L##END##_tlb); \ +} \ +void HELPER(sme_st1##L##END##_v_mte)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_st1_mte(env, za, vg, addr, desc, GETPC(), ESZ, true, \ + sme_st1##L##END##_v_host, sme_st1##L##END##_v_tlb); \ +} + +DO_ST(b, , MO_8) +DO_ST(h, _be, MO_16) +DO_ST(h, _le, MO_16) +DO_ST(s, _be, MO_32) +DO_ST(s, _le, MO_32) +DO_ST(d, _be, MO_64) +DO_ST(d, _le, MO_64) +DO_ST(q, _be, MO_128) +DO_ST(q, _le, MO_128) + +#undef DO_ST diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_MOVA(DisasContext *s, arg_MOVA *a) return true; } + +static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) +{ + typedef void GenLdSt1(TCGv_env, TCGv_ptr, TCGv_ptr, TCGv, TCGv_i32); + + /* + * Indexed by [esz][be][v][mte][st], which is (except for load/store) + * also the order in which the elements appear in the function names, + * and so how we must concatenate the pieces. + */ + +#define FN_LS(F) { gen_helper_sme_ld1##F, gen_helper_sme_st1##F } +#define FN_MTE(F) { FN_LS(F), FN_LS(F##_mte) } +#define FN_HV(F) { FN_MTE(F##_h), FN_MTE(F##_v) } +#define FN_END(L, B) { FN_HV(L), FN_HV(B) } + + static GenLdSt1 * const fns[5][2][2][2][2] = { + FN_END(b, b), + FN_END(h_le, h_be), + FN_END(s_le, s_be), + FN_END(d_le, d_be), + FN_END(q_le, q_be), + }; + +#undef FN_LS +#undef FN_MTE +#undef FN_HV +#undef FN_END + + TCGv_ptr t_za, t_pg; + TCGv_i64 addr; + int svl, desc = 0; + bool be = s->be_data == MO_BE; + bool mte = s->mte_active[0]; + + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (!sme_smza_enabled_check(s)) { + return true; + } + + t_za = get_tile_rowcol(s, a->esz, a->rs, a->za_imm, a->v); + t_pg = pred_full_reg_ptr(s, a->pg); + addr = tcg_temp_new_i64(); + + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz); + tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); + + if (mte) { + desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); + desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); + desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); + desc = FIELD_DP32(desc, MTEDESC, WRITE, a->st); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << a->esz) - 1); + desc <<= SVE_MTEDESC_SHIFT; + } else { + addr = clean_data_tbi(s, addr); + } + svl = streaming_vec_reg_size(s); + desc = simd_desc(svl, svl, desc); + + fns[a->esz][be][a->v][mte][a->st](cpu_env, t_za, t_pg, addr, + tcg_constant_i32(desc)); + + tcg_temp_free_ptr(t_za); + tcg_temp_free_ptr(t_pg); + tcg_temp_free_i64(addr); + return true; +} -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add a TCGv_ptr base argument, which will be cpu_env for SVE. We will reuse this for SME save and restore array insns. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 3 +++ target/arm/translate-sve.c | 48 ++++++++++++++++++++++++++++---------- 2 files changed, 39 insertions(+), 12 deletions(-) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ void gen_gvec_xar(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, uint32_t rm_ofs, int64_t shift, uint32_t opr_sz, uint32_t max_sz); +void gen_sve_ldr(DisasContext *s, TCGv_ptr, int vofs, int len, int rn, int imm); +void gen_sve_str(DisasContext *s, TCGv_ptr, int vofs, int len, int rn, int imm); + #endif /* TARGET_ARM_TRANSLATE_A64_H */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(UCVTF_dd, aa64_sve, gen_gvec_fpst_arg_zpz, * The load should begin at the address Rn + IMM. */ -static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) +void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs, + int len, int rn, int imm) { int len_align = QEMU_ALIGN_DOWN(len, 8); int len_remain = len % 8; @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) t0 = tcg_temp_new_i64(); for (i = 0; i < len_align; i += 8) { tcg_gen_qemu_ld_i64(t0, clean_addr, midx, MO_LEUQ); - tcg_gen_st_i64(t0, cpu_env, vofs + i); + tcg_gen_st_i64(t0, base, vofs + i); tcg_gen_addi_i64(clean_addr, clean_addr, 8); } tcg_temp_free_i64(t0); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); + if (base != cpu_env) { + TCGv_ptr b = tcg_temp_local_new_ptr(); + tcg_gen_mov_ptr(b, base); + base = b; + } + gen_set_label(loop); t0 = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_addi_i64(clean_addr, clean_addr, 8); tp = tcg_temp_new_ptr(); - tcg_gen_add_ptr(tp, cpu_env, i); + tcg_gen_add_ptr(tp, base, i); tcg_gen_addi_ptr(i, i, 8); tcg_gen_st_i64(t0, tp, vofs); tcg_temp_free_ptr(tp); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_brcondi_ptr(TCG_COND_LTU, i, len_align, loop); tcg_temp_free_ptr(i); + + if (base != cpu_env) { + tcg_temp_free_ptr(base); + assert(len_remain == 0); + } } /* @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) default: g_assert_not_reached(); } - tcg_gen_st_i64(t0, cpu_env, vofs + len_align); + tcg_gen_st_i64(t0, base, vofs + len_align); tcg_temp_free_i64(t0); } } /* Similarly for stores. */ -static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) +void gen_sve_str(DisasContext *s, TCGv_ptr base, int vofs, + int len, int rn, int imm) { int len_align = QEMU_ALIGN_DOWN(len, 8); int len_remain = len % 8; @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) t0 = tcg_temp_new_i64(); for (i = 0; i < len_align; i += 8) { - tcg_gen_ld_i64(t0, cpu_env, vofs + i); + tcg_gen_ld_i64(t0, base, vofs + i); tcg_gen_qemu_st_i64(t0, clean_addr, midx, MO_LEUQ); tcg_gen_addi_i64(clean_addr, clean_addr, 8); } @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); + if (base != cpu_env) { + TCGv_ptr b = tcg_temp_local_new_ptr(); + tcg_gen_mov_ptr(b, base); + base = b; + } + gen_set_label(loop); t0 = tcg_temp_new_i64(); tp = tcg_temp_new_ptr(); - tcg_gen_add_ptr(tp, cpu_env, i); + tcg_gen_add_ptr(tp, base, i); tcg_gen_ld_i64(t0, tp, vofs); tcg_gen_addi_ptr(i, i, 8); tcg_temp_free_ptr(tp); @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_brcondi_ptr(TCG_COND_LTU, i, len_align, loop); tcg_temp_free_ptr(i); + + if (base != cpu_env) { + tcg_temp_free_ptr(base); + assert(len_remain == 0); + } } /* Predicate register stores can be any multiple of 2. */ if (len_remain) { t0 = tcg_temp_new_i64(); - tcg_gen_ld_i64(t0, cpu_env, vofs + len_align); + tcg_gen_ld_i64(t0, base, vofs + len_align); switch (len_remain) { case 2: @@ -XXX,XX +XXX,XX @@ static bool trans_LDR_zri(DisasContext *s, arg_rri *a) if (sve_access_check(s)) { int size = vec_full_reg_size(s); int off = vec_full_reg_offset(s, a->rd); - do_ldr(s, off, size, a->rn, a->imm * size); + gen_sve_ldr(s, cpu_env, off, size, a->rn, a->imm * size); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDR_pri(DisasContext *s, arg_rri *a) if (sve_access_check(s)) { int size = pred_full_reg_size(s); int off = pred_full_reg_offset(s, a->rd); - do_ldr(s, off, size, a->rn, a->imm * size); + gen_sve_ldr(s, cpu_env, off, size, a->rn, a->imm * size); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_STR_zri(DisasContext *s, arg_rri *a) if (sve_access_check(s)) { int size = vec_full_reg_size(s); int off = vec_full_reg_offset(s, a->rd); - do_str(s, off, size, a->rn, a->imm * size); + gen_sve_str(s, cpu_env, off, size, a->rn, a->imm * size); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_STR_pri(DisasContext *s, arg_rri *a) if (sve_access_check(s)) { int size = pred_full_reg_size(s); int off = pred_full_reg_offset(s, a->rd); - do_str(s, off, size, a->rn, a->imm * size); + gen_sve_str(s, cpu_env, off, size, a->rn, a->imm * size); } return true; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We can reuse the SVE functions for LDR and STR, passing in the base of the ZA vector and a zero offset. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme.decode | 7 +++++++ target/arm/translate-sme.c | 24 ++++++++++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ LDST1 1110000 0 esz:2 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ &ldst rs=%mova_rs LDST1 1110000 111 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ &ldst esz=4 rs=%mova_rs + +&ldstr rv rn imm +@ldstr ....... ... . ...... .. ... rn:5 . imm:4 \ + &ldstr rv=%mova_rs + +LDR 1110000 100 0 000000 .. 000 ..... 0 .... @ldstr +STR 1110000 100 1 000000 .. 000 ..... 0 .... @ldstr diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) tcg_temp_free_i64(addr); return true; } + +typedef void GenLdStR(DisasContext *, TCGv_ptr, int, int, int, int); + +static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn) +{ + int svl = streaming_vec_reg_size(s); + int imm = a->imm; + TCGv_ptr base; + + if (!sme_za_enabled_check(s)) { + return true; + } + + /* ZA[n] equates to ZA0H.B[n]. */ + base = get_tile_rowcol(s, MO_8, a->rv, imm, false); + + fn(s, base, 0, svl, a->rn, imm * svl); + + tcg_temp_free_ptr(base); + return true; +} + +TRANS_FEAT(LDR, aa64_sme, do_ldst_r, a, gen_sve_ldr) +TRANS_FEAT(STR, aa64_sme, do_ldst_r, a, gen_sve_str) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 5 +++ target/arm/sme.decode | 11 +++++ target/arm/sme_helper.c | 90 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 31 +++++++++++++ 4 files changed, 137 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sme_st1q_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i DEF_HELPER_FLAGS_5(sme_st1q_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) DEF_HELPER_FLAGS_5(sme_st1q_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) DEF_HELPER_FLAGS_5(sme_st1q_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_addha_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sme_addva_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sme_addha_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sme_addva_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ LDST1 1110000 111 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ LDR 1110000 100 0 000000 .. 000 ..... 0 .... @ldstr STR 1110000 100 1 000000 .. 000 ..... 0 .... @ldstr + +### SME Add Vector to Array + +&adda zad zn pm pn +@adda_32 ........ .. ..... . pm:3 pn:3 zn:5 ... zad:2 &adda +@adda_64 ........ .. ..... . pm:3 pn:3 zn:5 .. zad:3 &adda + +ADDHA_s 11000000 10 01000 0 ... ... ..... 000 .. @adda_32 +ADDVA_s 11000000 10 01000 1 ... ... ..... 000 .. @adda_32 +ADDHA_d 11000000 11 01000 0 ... ... ..... 00 ... @adda_64 +ADDVA_d 11000000 11 01000 1 ... ... ..... 00 ... @adda_64 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ DO_ST(q, _be, MO_128) DO_ST(q, _le, MO_128) #undef DO_ST + +void HELPER(sme_addha_s)(void *vzda, void *vzn, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 4; + uint64_t *pn = vpn, *pm = vpm; + uint32_t *zda = vzda, *zn = vzn; + + for (row = 0; row < oprsz; ) { + uint64_t pa = pn[row >> 4]; + do { + if (pa & 1) { + for (col = 0; col < oprsz; ) { + uint64_t pb = pm[col >> 4]; + do { + if (pb & 1) { + zda[tile_vslice_index(row) + H4(col)] += zn[H4(col)]; + } + pb >>= 4; + } while (++col & 15); + } + } + pa >>= 4; + } while (++row & 15); + } +} + +void HELPER(sme_addha_d)(void *vzda, void *vzn, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 8; + uint8_t *pn = vpn, *pm = vpm; + uint64_t *zda = vzda, *zn = vzn; + + for (row = 0; row < oprsz; ++row) { + if (pn[H1(row)] & 1) { + for (col = 0; col < oprsz; ++col) { + if (pm[H1(col)] & 1) { + zda[tile_vslice_index(row) + col] += zn[col]; + } + } + } + } +} + +void HELPER(sme_addva_s)(void *vzda, void *vzn, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 4; + uint64_t *pn = vpn, *pm = vpm; + uint32_t *zda = vzda, *zn = vzn; + + for (row = 0; row < oprsz; ) { + uint64_t pa = pn[row >> 4]; + do { + if (pa & 1) { + uint32_t zn_row = zn[H4(row)]; + for (col = 0; col < oprsz; ) { + uint64_t pb = pm[col >> 4]; + do { + if (pb & 1) { + zda[tile_vslice_index(row) + H4(col)] += zn_row; + } + pb >>= 4; + } while (++col & 15); + } + } + pa >>= 4; + } while (++row & 15); + } +} + +void HELPER(sme_addva_d)(void *vzda, void *vzn, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 8; + uint8_t *pn = vpn, *pm = vpm; + uint64_t *zda = vzda, *zn = vzn; + + for (row = 0; row < oprsz; ++row) { + if (pn[H1(row)] & 1) { + uint64_t zn_row = zn[row]; + for (col = 0; col < oprsz; ++col) { + if (pm[H1(col)] & 1) { + zda[tile_vslice_index(row) + col] += zn_row; + } + } + } + } +} diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn) TRANS_FEAT(LDR, aa64_sme, do_ldst_r, a, gen_sve_ldr) TRANS_FEAT(STR, aa64_sme, do_ldst_r, a, gen_sve_str) + +static bool do_adda(DisasContext *s, arg_adda *a, MemOp esz, + gen_helper_gvec_4 *fn) +{ + int svl = streaming_vec_reg_size(s); + uint32_t desc = simd_desc(svl, svl, 0); + TCGv_ptr za, zn, pn, pm; + + if (!sme_smza_enabled_check(s)) { + return true; + } + + /* Sum XZR+zad to find ZAd. */ + za = get_tile_rowcol(s, esz, 31, a->zad, false); + zn = vec_full_reg_ptr(s, a->zn); + pn = pred_full_reg_ptr(s, a->pn); + pm = pred_full_reg_ptr(s, a->pm); + + fn(za, zn, pn, pm, tcg_constant_i32(desc)); + + tcg_temp_free_ptr(za); + tcg_temp_free_ptr(zn); + tcg_temp_free_ptr(pn); + tcg_temp_free_ptr(pm); + return true; +} + +TRANS_FEAT(ADDHA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addha_s) +TRANS_FEAT(ADDVA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addva_s) +TRANS_FEAT(ADDHA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addha_d) +TRANS_FEAT(ADDVA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addva_d) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 5 +++ target/arm/sme.decode | 9 +++++ target/arm/sme_helper.c | 69 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 32 ++++++++++++++++++ 4 files changed, 115 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sme_addha_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addva_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addha_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addva_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_7(sme_fmopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_7(sme_fmopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ ADDHA_s 11000000 10 01000 0 ... ... ..... 000 .. @adda_32 ADDVA_s 11000000 10 01000 1 ... ... ..... 000 .. @adda_32 ADDHA_d 11000000 11 01000 0 ... ... ..... 00 ... @adda_64 ADDVA_d 11000000 11 01000 1 ... ... ..... 00 ... @adda_64 + +### SME Outer Product + +&op zad zn zm pm pn sub:bool +@op_32 ........ ... zm:5 pm:3 pn:3 zn:5 sub:1 .. zad:2 &op +@op_64 ........ ... zm:5 pm:3 pn:3 zn:5 sub:1 . zad:3 &op + +FMOPA_s 10000000 100 ..... ... ... ..... . 00 .. @op_32 +FMOPA_d 10000000 110 ..... ... ... ..... . 0 ... @op_64 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "exec/exec-all.h" #include "qemu/int128.h" +#include "fpu/softfloat.h" #include "vec_internal.h" #include "sve_ldst_internal.h" @@ -XXX,XX +XXX,XX @@ void HELPER(sme_addva_d)(void *vzda, void *vzn, void *vpn, } } } + +void HELPER(sme_fmopa_s)(void *vza, void *vzn, void *vzm, void *vpn, + void *vpm, void *vst, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_maxsz(desc); + uint32_t neg = simd_data(desc) << 31; + uint16_t *pn = vpn, *pm = vpm; + float_status fpst; + + /* + * Make a copy of float_status because this operation does not + * update the cumulative fp exception status. It also produces + * default nans. + */ + fpst = *(float_status *)vst; + set_default_nan_mode(true, &fpst); + + for (row = 0; row < oprsz; ) { + uint16_t pa = pn[H2(row >> 4)]; + do { + if (pa & 1) { + void *vza_row = vza + tile_vslice_offset(row); + uint32_t n = *(uint32_t *)(vzn + H1_4(row)) ^ neg; + + for (col = 0; col < oprsz; ) { + uint16_t pb = pm[H2(col >> 4)]; + do { + if (pb & 1) { + uint32_t *a = vza_row + H1_4(col); + uint32_t *m = vzm + H1_4(col); + *a = float32_muladd(n, *m, *a, 0, vst); + } + col += 4; + pb >>= 4; + } while (col & 15); + } + } + row += 4; + pa >>= 4; + } while (row & 15); + } +} + +void HELPER(sme_fmopa_d)(void *vza, void *vzn, void *vzm, void *vpn, + void *vpm, void *vst, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 8; + uint64_t neg = (uint64_t)simd_data(desc) << 63; + uint64_t *za = vza, *zn = vzn, *zm = vzm; + uint8_t *pn = vpn, *pm = vpm; + float_status fpst = *(float_status *)vst; + + set_default_nan_mode(true, &fpst); + + for (row = 0; row < oprsz; ++row) { + if (pn[H1(row)] & 1) { + uint64_t *za_row = &za[tile_vslice_index(row)]; + uint64_t n = zn[row] ^ neg; + + for (col = 0; col < oprsz; ++col) { + if (pm[H1(col)] & 1) { + uint64_t *a = &za_row[col]; + *a = float64_muladd(n, zm[col], *a, 0, &fpst); + } + } + } + } +} diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(ADDHA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addha_s) TRANS_FEAT(ADDVA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addva_s) TRANS_FEAT(ADDHA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addha_d) TRANS_FEAT(ADDVA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addva_d) + +static bool do_outprod_fpst(DisasContext *s, arg_op *a, MemOp esz, + gen_helper_gvec_5_ptr *fn) +{ + int svl = streaming_vec_reg_size(s); + uint32_t desc = simd_desc(svl, svl, a->sub); + TCGv_ptr za, zn, zm, pn, pm, fpst; + + if (!sme_smza_enabled_check(s)) { + return true; + } + + /* Sum XZR+zad to find ZAd. */ + za = get_tile_rowcol(s, esz, 31, a->zad, false); + zn = vec_full_reg_ptr(s, a->zn); + zm = vec_full_reg_ptr(s, a->zm); + pn = pred_full_reg_ptr(s, a->pn); + pm = pred_full_reg_ptr(s, a->pm); + fpst = fpstatus_ptr(FPST_FPCR); + + fn(za, zn, zm, pn, pm, fpst, tcg_constant_i32(desc)); + + tcg_temp_free_ptr(za); + tcg_temp_free_ptr(zn); + tcg_temp_free_ptr(pn); + tcg_temp_free_ptr(pm); + tcg_temp_free_ptr(fpst); + return true; +} + +TRANS_FEAT(FMOPA_s, aa64_sme, do_outprod_fpst, a, MO_32, gen_helper_sme_fmopa_s) +TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a, MO_64, gen_helper_sme_fmopa_d) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 2 ++ target/arm/sme.decode | 2 ++ target/arm/sme_helper.c | 56 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 30 ++++++++++++++++++++ 4 files changed, 90 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_7(sme_fmopa_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_7(sme_fmopa_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_bfmopa, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ ADDVA_d 11000000 11 01000 1 ... ... ..... 00 ... @adda_64 FMOPA_s 10000000 100 ..... ... ... ..... . 00 .. @op_32 FMOPA_d 10000000 110 ..... ... ... ..... . 0 ... @op_64 + +BFMOPA 10000001 100 ..... ... ... ..... . 00 .. @op_32 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sme_fmopa_d)(void *vza, void *vzn, void *vzm, void *vpn, } } } + +/* + * Alter PAIR as needed for controlling predicates being false, + * and for NEG on an enabled row element. + */ +static inline uint32_t f16mop_adj_pair(uint32_t pair, uint32_t pg, uint32_t neg) +{ + /* + * The pseudocode uses a conditional negate after the conditional zero. + * It is simpler here to unconditionally negate before conditional zero. + */ + pair ^= neg; + if (!(pg & 1)) { + pair &= 0xffff0000u; + } + if (!(pg & 4)) { + pair &= 0x0000ffffu; + } + return pair; +} + +void HELPER(sme_bfmopa)(void *vza, void *vzn, void *vzm, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_maxsz(desc); + uint32_t neg = simd_data(desc) * 0x80008000u; + uint16_t *pn = vpn, *pm = vpm; + + for (row = 0; row < oprsz; ) { + uint16_t prow = pn[H2(row >> 4)]; + do { + void *vza_row = vza + tile_vslice_offset(row); + uint32_t n = *(uint32_t *)(vzn + H1_4(row)); + + n = f16mop_adj_pair(n, prow, neg); + + for (col = 0; col < oprsz; ) { + uint16_t pcol = pm[H2(col >> 4)]; + do { + if (prow & pcol & 0b0101) { + uint32_t *a = vza_row + H1_4(col); + uint32_t m = *(uint32_t *)(vzm + H1_4(col)); + + m = f16mop_adj_pair(m, pcol, 0); + *a = bfdotadd(*a, n, m); + + col += 4; + pcol >>= 4; + } + } while (col & 15); + } + row += 4; + prow >>= 4; + } while (row & 15); + } +} diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(ADDVA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addva_s) TRANS_FEAT(ADDHA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addha_d) TRANS_FEAT(ADDVA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addva_d) +static bool do_outprod(DisasContext *s, arg_op *a, MemOp esz, + gen_helper_gvec_5 *fn) +{ + int svl = streaming_vec_reg_size(s); + uint32_t desc = simd_desc(svl, svl, a->sub); + TCGv_ptr za, zn, zm, pn, pm; + + if (!sme_smza_enabled_check(s)) { + return true; + } + + /* Sum XZR+zad to find ZAd. */ + za = get_tile_rowcol(s, esz, 31, a->zad, false); + zn = vec_full_reg_ptr(s, a->zn); + zm = vec_full_reg_ptr(s, a->zm); + pn = pred_full_reg_ptr(s, a->pn); + pm = pred_full_reg_ptr(s, a->pm); + + fn(za, zn, zm, pn, pm, tcg_constant_i32(desc)); + + tcg_temp_free_ptr(za); + tcg_temp_free_ptr(zn); + tcg_temp_free_ptr(pn); + tcg_temp_free_ptr(pm); + return true; +} + static bool do_outprod_fpst(DisasContext *s, arg_op *a, MemOp esz, gen_helper_gvec_5_ptr *fn) { @@ -XXX,XX +XXX,XX @@ static bool do_outprod_fpst(DisasContext *s, arg_op *a, MemOp esz, TRANS_FEAT(FMOPA_s, aa64_sme, do_outprod_fpst, a, MO_32, gen_helper_sme_fmopa_s) TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a, MO_64, gen_helper_sme_fmopa_d) + +/* TODO: FEAT_EBF16 */ +TRANS_FEAT(BFMOPA, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_bfmopa) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 2 ++ target/arm/sme.decode | 1 + target/arm/sme_helper.c | 74 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 1 + 4 files changed, 78 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sme_addva_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addha_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addva_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_7(sme_fmopa_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_7(sme_fmopa_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_7(sme_fmopa_d, TCG_CALL_NO_RWG, diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ FMOPA_s 10000000 100 ..... ... ... ..... . 00 .. @op_32 FMOPA_d 10000000 110 ..... ... ... ..... . 0 ... @op_64 BFMOPA 10000001 100 ..... ... ... ..... . 00 .. @op_32 +FMOPA_h 10000001 101 ..... ... ... ..... . 00 .. @op_32 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t f16mop_adj_pair(uint32_t pair, uint32_t pg, uint32_t neg) return pair; } +static float32 f16_dotadd(float32 sum, uint32_t e1, uint32_t e2, + float_status *s_std, float_status *s_odd) +{ + float64 e1r = float16_to_float64(e1 & 0xffff, true, s_std); + float64 e1c = float16_to_float64(e1 >> 16, true, s_std); + float64 e2r = float16_to_float64(e2 & 0xffff, true, s_std); + float64 e2c = float16_to_float64(e2 >> 16, true, s_std); + float64 t64; + float32 t32; + + /* + * The ARM pseudocode function FPDot performs both multiplies + * and the add with a single rounding operation. Emulate this + * by performing the first multiply in round-to-odd, then doing + * the second multiply as fused multiply-add, and rounding to + * float32 all in one step. + */ + t64 = float64_mul(e1r, e2r, s_odd); + t64 = float64r32_muladd(e1c, e2c, t64, 0, s_std); + + /* This conversion is exact, because we've already rounded. */ + t32 = float64_to_float32(t64, s_std); + + /* The final accumulation step is not fused. */ + return float32_add(sum, t32, s_std); +} + +void HELPER(sme_fmopa_h)(void *vza, void *vzn, void *vzm, void *vpn, + void *vpm, void *vst, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_maxsz(desc); + uint32_t neg = simd_data(desc) * 0x80008000u; + uint16_t *pn = vpn, *pm = vpm; + float_status fpst_odd, fpst_std; + + /* + * Make a copy of float_status because this operation does not + * update the cumulative fp exception status. It also produces + * default nans. Make a second copy with round-to-odd -- see above. + */ + fpst_std = *(float_status *)vst; + set_default_nan_mode(true, &fpst_std); + fpst_odd = fpst_std; + set_float_rounding_mode(float_round_to_odd, &fpst_odd); + + for (row = 0; row < oprsz; ) { + uint16_t prow = pn[H2(row >> 4)]; + do { + void *vza_row = vza + tile_vslice_offset(row); + uint32_t n = *(uint32_t *)(vzn + H1_4(row)); + + n = f16mop_adj_pair(n, prow, neg); + + for (col = 0; col < oprsz; ) { + uint16_t pcol = pm[H2(col >> 4)]; + do { + if (prow & pcol & 0b0101) { + uint32_t *a = vza_row + H1_4(col); + uint32_t m = *(uint32_t *)(vzm + H1_4(col)); + + m = f16mop_adj_pair(m, pcol, 0); + *a = f16_dotadd(*a, n, m, &fpst_std, &fpst_odd); + + col += 4; + pcol >>= 4; + } + } while (col & 15); + } + row += 4; + prow >>= 4; + } while (row & 15); + } +} + void HELPER(sme_bfmopa)(void *vza, void *vzn, void *vzm, void *vpn, void *vpm, uint32_t desc) { diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool do_outprod_fpst(DisasContext *s, arg_op *a, MemOp esz, return true; } +TRANS_FEAT(FMOPA_h, aa64_sme, do_outprod_fpst, a, MO_32, gen_helper_sme_fmopa_h) TRANS_FEAT(FMOPA_s, aa64_sme, do_outprod_fpst, a, MO_32, gen_helper_sme_fmopa_s) TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a, MO_64, gen_helper_sme_fmopa_d) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This is SMOPA, SUMOPA, USMOPA_s, UMOPA, for both Int8 and Int16. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 16 ++++++++ target/arm/sme.decode | 10 +++++ target/arm/sme_helper.c | 82 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 10 +++++ 4 files changed, 118 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_7(sme_fmopa_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_6(sme_bfmopa, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_smopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_umopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_sumopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_usmopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_smopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_umopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_sumopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_usmopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ FMOPA_d 10000000 110 ..... ... ... ..... . 0 ... @op_64 BFMOPA 10000001 100 ..... ... ... ..... . 00 .. @op_32 FMOPA_h 10000001 101 ..... ... ... ..... . 00 .. @op_32 + +SMOPA_s 1010000 0 10 0 ..... ... ... ..... . 00 .. @op_32 +SUMOPA_s 1010000 0 10 1 ..... ... ... ..... . 00 .. @op_32 +USMOPA_s 1010000 1 10 0 ..... ... ... ..... . 00 .. @op_32 +UMOPA_s 1010000 1 10 1 ..... ... ... ..... . 00 .. @op_32 + +SMOPA_d 1010000 0 11 0 ..... ... ... ..... . 0 ... @op_64 +SUMOPA_d 1010000 0 11 1 ..... ... ... ..... . 0 ... @op_64 +USMOPA_d 1010000 1 11 0 ..... ... ... ..... . 0 ... @op_64 +UMOPA_d 1010000 1 11 1 ..... ... ... ..... . 0 ... @op_64 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sme_bfmopa)(void *vza, void *vzn, void *vzm, void *vpn, } while (row & 15); } } + +typedef uint64_t IMOPFn(uint64_t, uint64_t, uint64_t, uint8_t, bool); + +static inline void do_imopa(uint64_t *za, uint64_t *zn, uint64_t *zm, + uint8_t *pn, uint8_t *pm, + uint32_t desc, IMOPFn *fn) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 8; + bool neg = simd_data(desc); + + for (row = 0; row < oprsz; ++row) { + uint8_t pa = pn[H1(row)]; + uint64_t *za_row = &za[tile_vslice_index(row)]; + uint64_t n = zn[row]; + + for (col = 0; col < oprsz; ++col) { + uint8_t pb = pm[H1(col)]; + uint64_t *a = &za_row[col]; + + *a = fn(n, zm[col], *a, pa & pb, neg); + } + } +} + +#define DEF_IMOP_32(NAME, NTYPE, MTYPE) \ +static uint64_t NAME(uint64_t n, uint64_t m, uint64_t a, uint8_t p, bool neg) \ +{ \ + uint32_t sum0 = 0, sum1 = 0; \ + /* Apply P to N as a mask, making the inactive elements 0. */ \ + n &= expand_pred_b(p); \ + sum0 += (NTYPE)(n >> 0) * (MTYPE)(m >> 0); \ + sum0 += (NTYPE)(n >> 8) * (MTYPE)(m >> 8); \ + sum0 += (NTYPE)(n >> 16) * (MTYPE)(m >> 16); \ + sum0 += (NTYPE)(n >> 24) * (MTYPE)(m >> 24); \ + sum1 += (NTYPE)(n >> 32) * (MTYPE)(m >> 32); \ + sum1 += (NTYPE)(n >> 40) * (MTYPE)(m >> 40); \ + sum1 += (NTYPE)(n >> 48) * (MTYPE)(m >> 48); \ + sum1 += (NTYPE)(n >> 56) * (MTYPE)(m >> 56); \ + if (neg) { \ + sum0 = (uint32_t)a - sum0, sum1 = (uint32_t)(a >> 32) - sum1; \ + } else { \ + sum0 = (uint32_t)a + sum0, sum1 = (uint32_t)(a >> 32) + sum1; \ + } \ + return ((uint64_t)sum1 << 32) | sum0; \ +} + +#define DEF_IMOP_64(NAME, NTYPE, MTYPE) \ +static uint64_t NAME(uint64_t n, uint64_t m, uint64_t a, uint8_t p, bool neg) \ +{ \ + uint64_t sum = 0; \ + /* Apply P to N as a mask, making the inactive elements 0. */ \ + n &= expand_pred_h(p); \ + sum += (NTYPE)(n >> 0) * (MTYPE)(m >> 0); \ + sum += (NTYPE)(n >> 16) * (MTYPE)(m >> 16); \ + sum += (NTYPE)(n >> 32) * (MTYPE)(m >> 32); \ + sum += (NTYPE)(n >> 48) * (MTYPE)(m >> 48); \ + return neg ? a - sum : a + sum; \ +} + +DEF_IMOP_32(smopa_s, int8_t, int8_t) +DEF_IMOP_32(umopa_s, uint8_t, uint8_t) +DEF_IMOP_32(sumopa_s, int8_t, uint8_t) +DEF_IMOP_32(usmopa_s, uint8_t, int8_t) + +DEF_IMOP_64(smopa_d, int16_t, int16_t) +DEF_IMOP_64(umopa_d, uint16_t, uint16_t) +DEF_IMOP_64(sumopa_d, int16_t, uint16_t) +DEF_IMOP_64(usmopa_d, uint16_t, int16_t) + +#define DEF_IMOPH(NAME) \ + void HELPER(sme_##NAME)(void *vza, void *vzn, void *vzm, void *vpn, \ + void *vpm, uint32_t desc) \ + { do_imopa(vza, vzn, vzm, vpn, vpm, desc, NAME); } + +DEF_IMOPH(smopa_s) +DEF_IMOPH(umopa_s) +DEF_IMOPH(sumopa_s) +DEF_IMOPH(usmopa_s) +DEF_IMOPH(smopa_d) +DEF_IMOPH(umopa_d) +DEF_IMOPH(sumopa_d) +DEF_IMOPH(usmopa_d) diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a, MO_64, gen_helper_sme_f /* TODO: FEAT_EBF16 */ TRANS_FEAT(BFMOPA, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_bfmopa) + +TRANS_FEAT(SMOPA_s, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_smopa_s) +TRANS_FEAT(UMOPA_s, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_umopa_s) +TRANS_FEAT(SUMOPA_s, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_sumopa_s) +TRANS_FEAT(USMOPA_s, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_usmopa_s) + +TRANS_FEAT(SMOPA_d, aa64_sme_i16i64, do_outprod, a, MO_64, gen_helper_sme_smopa_d) +TRANS_FEAT(UMOPA_d, aa64_sme_i16i64, do_outprod, a, MO_64, gen_helper_sme_umopa_d) +TRANS_FEAT(SUMOPA_d, aa64_sme_i16i64, do_outprod, a, MO_64, gen_helper_sme_sumopa_d) +TRANS_FEAT(USMOPA_d, aa64_sme_i16i64, do_outprod, a, MO_64, gen_helper_sme_usmopa_d) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This is an SVE instruction that operates using the SVE vector length but that it is present only if SME is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve.decode | 20 +++++++++++++ target/arm/translate-sve.c | 57 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 77 insertions(+) diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ BFMLALT_zzxw 01100100 11 1 ..... 0100.1 ..... ..... @rrxr_3a esz=2 ### SVE2 floating-point bfloat16 dot-product (indexed) BFDOT_zzxz 01100100 01 1 ..... 010000 ..... ..... @rrxr_2 esz=2 + +### SVE broadcast predicate element + +&psel esz pd pn pm rv imm +%psel_rv 16:2 !function=plus_12 +%psel_imm_b 22:2 19:2 +%psel_imm_h 22:2 20:1 +%psel_imm_s 22:2 +%psel_imm_d 23:1 +@psel ........ .. . ... .. .. pn:4 . pm:4 . pd:4 \ + &psel rv=%psel_rv + +PSEL 00100101 .. 1 ..1 .. 01 .... 0 .... 0 .... \ + @psel esz=0 imm=%psel_imm_b +PSEL 00100101 .. 1 .10 .. 01 .... 0 .... 0 .... \ + @psel esz=1 imm=%psel_imm_h +PSEL 00100101 .. 1 100 .. 01 .... 0 .... 0 .... \ + @psel esz=2 imm=%psel_imm_s +PSEL 00100101 .1 1 000 .. 01 .... 0 .... 0 .... \ + @psel esz=3 imm=%psel_imm_d diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_BFMLAL_zzxw(DisasContext *s, arg_rrxr_esz *a, bool sel) TRANS_FEAT(BFMLALB_zzxw, aa64_sve_bf16, do_BFMLAL_zzxw, a, false) TRANS_FEAT(BFMLALT_zzxw, aa64_sve_bf16, do_BFMLAL_zzxw, a, true) + +static bool trans_PSEL(DisasContext *s, arg_psel *a) +{ + int vl = vec_full_reg_size(s); + int pl = pred_gvec_reg_size(s); + int elements = vl >> a->esz; + TCGv_i64 tmp, didx, dbit; + TCGv_ptr ptr; + + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (!sve_access_check(s)) { + return true; + } + + tmp = tcg_temp_new_i64(); + dbit = tcg_temp_new_i64(); + didx = tcg_temp_new_i64(); + ptr = tcg_temp_new_ptr(); + + /* Compute the predicate element. */ + tcg_gen_addi_i64(tmp, cpu_reg(s, a->rv), a->imm); + if (is_power_of_2(elements)) { + tcg_gen_andi_i64(tmp, tmp, elements - 1); + } else { + tcg_gen_remu_i64(tmp, tmp, tcg_constant_i64(elements)); + } + + /* Extract the predicate byte and bit indices. */ + tcg_gen_shli_i64(tmp, tmp, a->esz); + tcg_gen_andi_i64(dbit, tmp, 7); + tcg_gen_shri_i64(didx, tmp, 3); + if (HOST_BIG_ENDIAN) { + tcg_gen_xori_i64(didx, didx, 7); + } + + /* Load the predicate word. */ + tcg_gen_trunc_i64_ptr(ptr, didx); + tcg_gen_add_ptr(ptr, ptr, cpu_env); + tcg_gen_ld8u_i64(tmp, ptr, pred_full_reg_offset(s, a->pm)); + + /* Extract the predicate bit and replicate to MO_64. */ + tcg_gen_shr_i64(tmp, tmp, dbit); + tcg_gen_andi_i64(tmp, tmp, 1); + tcg_gen_neg_i64(tmp, tmp); + + /* Apply to either copy the source, or write zeros. */ + tcg_gen_gvec_ands(MO_64, pred_full_reg_offset(s, a->pd), + pred_full_reg_offset(s, a->pn), tmp, pl, pl); + + tcg_temp_free_i64(tmp); + tcg_temp_free_i64(dbit); + tcg_temp_free_i64(didx); + tcg_temp_free_ptr(ptr); + return true; +} -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This is an SVE instruction that operates using the SVE vector length but that it is present only if SME is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 2 ++ target/arm/sve.decode | 1 + target/arm/sve_helper.c | 16 ++++++++++++++++ target/arm/translate-sve.c | 2 ++ 4 files changed, 21 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_revh_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_revw_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_revd_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_4(sve_rbit_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_rbit_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_rbit_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ REVB 00000101 .. 1001 00 100 ... ..... ..... @rd_pg_rn REVH 00000101 .. 1001 01 100 ... ..... ..... @rd_pg_rn REVW 00000101 .. 1001 10 100 ... ..... ..... @rd_pg_rn RBIT 00000101 .. 1001 11 100 ... ..... ..... @rd_pg_rn +REVD 00000101 00 1011 10 100 ... ..... ..... @rd_pg_rn_e0 # SVE vector splice (predicated, destructive) SPLICE 00000101 .. 101 100 100 ... ..... ..... @rdn_pg_rm diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_ZPZ_D(sve_revh_d, uint64_t, hswap64) DO_ZPZ_D(sve_revw_d, uint64_t, wswap64) +void HELPER(sme_revd_q)(void *vd, void *vn, void *vg, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t *d = vd, *n = vn; + uint8_t *pg = vg; + + for (i = 0; i < opr_sz; i += 2) { + if (pg[H1(i)] & 1) { + uint64_t n0 = n[i + 0]; + uint64_t n1 = n[i + 1]; + d[i + 0] = n1; + d[i + 1] = n0; + } + } +} + DO_ZPZ(sve_rbit_b, uint8_t, H1, revbit8) DO_ZPZ(sve_rbit_h, uint16_t, H1_2, revbit16) DO_ZPZ(sve_rbit_s, uint32_t, H1_4, revbit32) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(REVH, aa64_sve, gen_gvec_ool_arg_zpz, revh_fns[a->esz], a, 0) TRANS_FEAT(REVW, aa64_sve, gen_gvec_ool_arg_zpz, a->esz == 3 ? gen_helper_sve_revw_d : NULL, a, 0) +TRANS_FEAT(REVD, aa64_sme, gen_gvec_ool_arg_zpz, gen_helper_sme_revd_q, a, 0) + TRANS_FEAT(SPLICE, aa64_sve, gen_gvec_ool_arg_zpzz, gen_helper_sve_splice, a, a->esz) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This is an SVE instruction that operates using the SVE vector length but that it is present only if SME is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 18 +++++++ target/arm/sve.decode | 5 ++ target/arm/translate-sve.c | 102 +++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 24 +++++++++ 4 files changed, 149 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(gvec_bfmlal, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_6(gvec_bfmlal_idx, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_sclamp_b, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_sclamp_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_sclamp_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_sclamp_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(gvec_uclamp_b, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_uclamp_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_uclamp_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_uclamp_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ PSEL 00100101 .. 1 100 .. 01 .... 0 .... 0 .... \ @psel esz=2 imm=%psel_imm_s PSEL 00100101 .1 1 000 .. 01 .... 0 .... 0 .... \ @psel esz=3 imm=%psel_imm_d + +### SVE clamp + +SCLAMP 01000100 .. 0 ..... 110000 ..... ..... @rda_rn_rm +UCLAMP 01000100 .. 0 ..... 110001 ..... ..... @rda_rn_rm diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_PSEL(DisasContext *s, arg_psel *a) tcg_temp_free_ptr(ptr); return true; } + +static void gen_sclamp_i32(TCGv_i32 d, TCGv_i32 n, TCGv_i32 m, TCGv_i32 a) +{ + tcg_gen_smax_i32(d, a, n); + tcg_gen_smin_i32(d, d, m); +} + +static void gen_sclamp_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m, TCGv_i64 a) +{ + tcg_gen_smax_i64(d, a, n); + tcg_gen_smin_i64(d, d, m); +} + +static void gen_sclamp_vec(unsigned vece, TCGv_vec d, TCGv_vec n, + TCGv_vec m, TCGv_vec a) +{ + tcg_gen_smax_vec(vece, d, a, n); + tcg_gen_smin_vec(vece, d, d, m); +} + +static void gen_sclamp(unsigned vece, uint32_t d, uint32_t n, uint32_t m, + uint32_t a, uint32_t oprsz, uint32_t maxsz) +{ + static const TCGOpcode vecop[] = { + INDEX_op_smin_vec, INDEX_op_smax_vec, 0 + }; + static const GVecGen4 ops[4] = { + { .fniv = gen_sclamp_vec, + .fno = gen_helper_gvec_sclamp_b, + .opt_opc = vecop, + .vece = MO_8 }, + { .fniv = gen_sclamp_vec, + .fno = gen_helper_gvec_sclamp_h, + .opt_opc = vecop, + .vece = MO_16 }, + { .fni4 = gen_sclamp_i32, + .fniv = gen_sclamp_vec, + .fno = gen_helper_gvec_sclamp_s, + .opt_opc = vecop, + .vece = MO_32 }, + { .fni8 = gen_sclamp_i64, + .fniv = gen_sclamp_vec, + .fno = gen_helper_gvec_sclamp_d, + .opt_opc = vecop, + .vece = MO_64, + .prefer_i64 = TCG_TARGET_REG_BITS == 64 } + }; + tcg_gen_gvec_4(d, n, m, a, oprsz, maxsz, &ops[vece]); +} + +TRANS_FEAT(SCLAMP, aa64_sme, gen_gvec_fn_arg_zzzz, gen_sclamp, a) + +static void gen_uclamp_i32(TCGv_i32 d, TCGv_i32 n, TCGv_i32 m, TCGv_i32 a) +{ + tcg_gen_umax_i32(d, a, n); + tcg_gen_umin_i32(d, d, m); +} + +static void gen_uclamp_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m, TCGv_i64 a) +{ + tcg_gen_umax_i64(d, a, n); + tcg_gen_umin_i64(d, d, m); +} + +static void gen_uclamp_vec(unsigned vece, TCGv_vec d, TCGv_vec n, + TCGv_vec m, TCGv_vec a) +{ + tcg_gen_umax_vec(vece, d, a, n); + tcg_gen_umin_vec(vece, d, d, m); +} + +static void gen_uclamp(unsigned vece, uint32_t d, uint32_t n, uint32_t m, + uint32_t a, uint32_t oprsz, uint32_t maxsz) +{ + static const TCGOpcode vecop[] = { + INDEX_op_umin_vec, INDEX_op_umax_vec, 0 + }; + static const GVecGen4 ops[4] = { + { .fniv = gen_uclamp_vec, + .fno = gen_helper_gvec_uclamp_b, + .opt_opc = vecop, + .vece = MO_8 }, + { .fniv = gen_uclamp_vec, + .fno = gen_helper_gvec_uclamp_h, + .opt_opc = vecop, + .vece = MO_16 }, + { .fni4 = gen_uclamp_i32, + .fniv = gen_uclamp_vec, + .fno = gen_helper_gvec_uclamp_s, + .opt_opc = vecop, + .vece = MO_32 }, + { .fni8 = gen_uclamp_i64, + .fniv = gen_uclamp_vec, + .fno = gen_helper_gvec_uclamp_d, + .opt_opc = vecop, + .vece = MO_64, + .prefer_i64 = TCG_TARGET_REG_BITS == 64 } + }; + tcg_gen_gvec_4(d, n, m, a, oprsz, maxsz, &ops[vece]); +} + +TRANS_FEAT(UCLAMP, aa64_sme, gen_gvec_fn_arg_zzzz, gen_uclamp, a) diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_bfmlal_idx)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +#define DO_CLAMP(NAME, TYPE) \ +void HELPER(NAME)(void *d, void *n, void *m, void *a, uint32_t desc) \ +{ \ + intptr_t i, opr_sz = simd_oprsz(desc); \ + for (i = 0; i < opr_sz; i += sizeof(TYPE)) { \ + TYPE aa = *(TYPE *)(a + i); \ + TYPE nn = *(TYPE *)(n + i); \ + TYPE mm = *(TYPE *)(m + i); \ + TYPE dd = MIN(MAX(aa, nn), mm); \ + *(TYPE *)(d + i) = dd; \ + } \ + clear_tail(d, opr_sz, simd_maxsz(desc)); \ +} + +DO_CLAMP(gvec_sclamp_b, int8_t) +DO_CLAMP(gvec_sclamp_h, int16_t) +DO_CLAMP(gvec_sclamp_s, int32_t) +DO_CLAMP(gvec_sclamp_d, int64_t) + +DO_CLAMP(gvec_uclamp_b, uint8_t) +DO_CLAMP(gvec_uclamp_h, uint16_t) +DO_CLAMP(gvec_uclamp_s, uint32_t) +DO_CLAMP(gvec_uclamp_d, uint64_t) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We can handle both exception entry and exception return by hooking into aarch64_sve_change_el. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void aarch64_sve_change_el(CPUARMState *env, int old_el, return; } + old_a64 = old_el ? arm_el_is_aa64(env, old_el) : el0_a64; + new_a64 = new_el ? arm_el_is_aa64(env, new_el) : el0_a64; + + /* + * Both AArch64.TakeException and AArch64.ExceptionReturn + * invoke ResetSVEState when taking an exception from, or + * returning to, AArch32 state when PSTATE.SM is enabled. + */ + if (old_a64 != new_a64 && FIELD_EX64(env->svcr, SVCR, SM)) { + arm_reset_sve_state(env); + return; + } + /* * DDI0584A.d sec 3.2: "If SVE instructions are disabled or trapped * at ELx, or not available because the EL is in AArch32 state, then @@ -XXX,XX +XXX,XX @@ void aarch64_sve_change_el(CPUARMState *env, int old_el, * we already have the correct register contents when encountering the * vq0->vq0 transition between EL0->EL1. */ - old_a64 = old_el ? arm_el_is_aa64(env, old_el) : el0_a64; old_len = (old_a64 && !sve_exception_el(env, old_el) ? sve_vqm1_for_el(env, old_el) : 0); - new_a64 = new_el ? arm_el_is_aa64(env, new_el) : el0_a64; new_len = (new_a64 && !sve_exception_el(env, new_el) ? sve_vqm1_for_el(env, new_el) : 0); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Note that SME remains effectively disabled for user-only, because we do not yet set CPACR_EL1.SMEN. This needs to wait until the kernel ABI is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-33-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 4 ++++ target/arm/cpu64.c | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_SHA512 (Advanced SIMD SHA512 instructions) - FEAT_SM3 (Advanced SIMD SM3 instructions) - FEAT_SM4 (Advanced SIMD SM4 instructions) +- FEAT_SME (Scalable Matrix Extension) +- FEAT_SME_FA64 (Full A64 instruction set in Streaming SVE mode) +- FEAT_SME_F64F64 (Double-precision floating-point outer product instructions) +- FEAT_SME_I16I64 (16-bit to 64-bit integer widening outer product instructions) - FEAT_SPECRES (Speculation restriction instructions) - FEAT_SSBS (Speculative Store Bypass Safe) - FEAT_TLBIOS (TLB invalidate instructions in Outer Shareable domain) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) */ t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ t = FIELD_DP64(t, ID_AA64PFR1, RAS_FRAC, 0); /* FEAT_RASv1p1 + FEAT_DoubleFault */ + t = FIELD_DP64(t, ID_AA64PFR1, SME, 1); /* FEAT_SME */ t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr1 = t; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; + t = cpu->isar.id_aa64smfr0; + t = FIELD_DP64(t, ID_AA64SMFR0, F32F32, 1); /* FEAT_SME */ + t = FIELD_DP64(t, ID_AA64SMFR0, B16F32, 1); /* FEAT_SME */ + t = FIELD_DP64(t, ID_AA64SMFR0, F16F32, 1); /* FEAT_SME */ + t = FIELD_DP64(t, ID_AA64SMFR0, I8I32, 0xf); /* FEAT_SME */ + t = FIELD_DP64(t, ID_AA64SMFR0, F64F64, 1); /* FEAT_SME_F64F64 */ + t = FIELD_DP64(t, ID_AA64SMFR0, I16I64, 0xf); /* FEAT_SME_I16I64 */ + t = FIELD_DP64(t, ID_AA64SMFR0, FA64, 1); /* FEAT_SME_FA64 */ + cpu->isar.id_aa64smfr0 = t; + /* Replicate the same data to the 32-bit id registers. */ aa32_max_features(cpu); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-34-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_cpu.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/linux-user/aarch64/target_cpu.h b/linux-user/aarch64/target_cpu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_cpu.h +++ b/linux-user/aarch64/target_cpu.h @@ -XXX,XX +XXX,XX @@ static inline void cpu_clone_regs_parent(CPUARMState *env, unsigned flags) static inline void cpu_set_tls(CPUARMState *env, target_ulong newtls) { - /* Note that AArch64 Linux keeps the TLS pointer in TPIDR; this is + /* + * Note that AArch64 Linux keeps the TLS pointer in TPIDR; this is * different from AArch32 Linux, which uses TPIDRRO. */ env->cp15.tpidr_el[0] = newtls; + /* TPIDR2_EL0 is cleared with CLONE_SETTLS. */ + env->cp15.tpidr2_el0 = 0; } static inline abi_ulong get_sp_from_cpustate(CPUARMState *state) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-35-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/cpu_loop.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) switch (trapnr) { case EXCP_SWI: + /* + * On syscall, PSTATE.ZA is preserved, along with the ZA matrix. + * PSTATE.SM is cleared, per SMSTOP, which does ResetSVEState. + */ + if (FIELD_EX64(env->svcr, SVCR, SM)) { + env->svcr = FIELD_DP64(env->svcr, SVCR, SM, 0); + arm_rebuild_hflags(env); + arm_reset_sve_state(env); + } ret = do_syscall(env, env->xregs[8], env->xregs[0], -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Make sure to zero the currently reserved fields. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-36-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ struct target_extra_context { struct target_sve_context { struct target_aarch64_ctx head; uint16_t vl; - uint16_t reserved[3]; + uint16_t flags; + uint16_t reserved[2]; /* The actual SVE data immediately follows. It is laid out * according to TARGET_SVE_SIG_{Z,P}REG_OFFSET, based off of * the original struct pointer. @@ -XXX,XX +XXX,XX @@ struct target_sve_context { #define TARGET_SVE_SIG_CONTEXT_SIZE(VQ) \ (TARGET_SVE_SIG_PREG_OFFSET(VQ, 17)) +#define TARGET_SVE_SIG_FLAG_SM 1 + struct target_rt_sigframe { struct target_siginfo info; struct target_ucontext uc; @@ -XXX,XX +XXX,XX @@ static void target_setup_sve_record(struct target_sve_context *sve, { int i, j; + memset(sve, 0, sizeof(*sve)); __put_user(TARGET_SVE_MAGIC, &sve->head.magic); __put_user(size, &sve->head.size); __put_user(vq * TARGET_SVE_VQ_BYTES, &sve->vl); + if (FIELD_EX64(env->svcr, SVCR, SM)) { + __put_user(TARGET_SVE_SIG_FLAG_SM, &sve->flags); + } /* Note that SVE regs are stored as a byte stream, with each byte element * at a subsequent address. This corresponds to a little-endian store -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Fold the return value setting into the goto, so each point of failure need not do both. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-37-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, struct target_sve_context *sve = NULL; uint64_t extra_datap = 0; bool used_extra = false; - bool err = false; int vq = 0, sve_size = 0; target_restore_general_frame(env, sf); @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, switch (magic) { case 0: if (size != 0) { - err = true; - goto exit; + goto err; } if (used_extra) { ctx = NULL; @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, case TARGET_FPSIMD_MAGIC: if (fpsimd || size != sizeof(struct target_fpsimd_context)) { - err = true; - goto exit; + goto err; } fpsimd = (struct target_fpsimd_context *)ctx; break; @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, break; } } - err = true; - goto exit; + goto err; case TARGET_EXTRA_MAGIC: if (extra || size != sizeof(struct target_extra_context)) { - err = true; - goto exit; + goto err; } __get_user(extra_datap, &((struct target_extra_context *)ctx)->datap); @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, /* Unknown record -- we certainly didn't generate it. * Did we in fact get out of sync? */ - err = true; - goto exit; + goto err; } ctx = (void *)ctx + size; } @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, if (fpsimd) { target_restore_fpsimd_record(env, fpsimd); } else { - err = true; + goto err; } /* SVE data, if present, overwrites FPSIMD data. */ if (sve) { target_restore_sve_record(env, sve, vq); } - - exit: unlock_user(extra, extra_datap, 0); - return err; + return 0; + + err: + unlock_user(extra, extra_datap, 0); + return 1; } static abi_ulong get_sigframe(struct target_sigaction *ka, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> In parse_user_sigframe, the kernel rejects duplicate sve records, or records that are smaller than the header. We were silently allowing these cases to pass, dropping the record. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-38-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, break; case TARGET_SVE_MAGIC: + if (sve || size < sizeof(struct target_sve_context)) { + goto err; + } if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { vq = sve_vq(env); sve_size = QEMU_ALIGN_UP(TARGET_SVE_SIG_CONTEXT_SIZE(vq), 16); - if (!sve && size == sve_size) { + if (size == sve_size) { sve = (struct target_sve_context *)ctx; break; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-39-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, __get_user(extra_size, &((struct target_extra_context *)ctx)->size); extra = lock_user(VERIFY_READ, extra_datap, extra_size, 0); + if (!extra) { + return 1; + } break; default: -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Move the checks out of the parsing loop and into the restore function. This more closely mirrors the code structure in the kernel, and is slightly clearer. Reject rather than silently skip incorrect VL and SVE record sizes, bringing our checks in to line with those the kernel does. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-40-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 51 +++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 16 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static void target_restore_fpsimd_record(CPUARMState *env, } } -static void target_restore_sve_record(CPUARMState *env, - struct target_sve_context *sve, int vq) +static bool target_restore_sve_record(CPUARMState *env, + struct target_sve_context *sve, + int size) { - int i, j; + int i, j, vl, vq; - /* Note that SVE regs are stored as a byte stream, with each byte element + if (!cpu_isar_feature(aa64_sve, env_archcpu(env))) { + return false; + } + + __get_user(vl, &sve->vl); + vq = sve_vq(env); + + /* Reject mismatched VL. */ + if (vl != vq * TARGET_SVE_VQ_BYTES) { + return false; + } + + /* Accept empty record -- used to clear PSTATE.SM. */ + if (size <= sizeof(*sve)) { + return true; + } + + /* Reject non-empty but incomplete record. */ + if (size < TARGET_SVE_SIG_CONTEXT_SIZE(vq)) { + return false; + } + + /* + * Note that SVE regs are stored as a byte stream, with each byte element * at a subsequent address. This corresponds to a little-endian load * of our 64-bit hunks. */ @@ -XXX,XX +XXX,XX @@ static void target_restore_sve_record(CPUARMState *env, } } } + return true; } static int target_restore_sigframe(CPUARMState *env, @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, struct target_sve_context *sve = NULL; uint64_t extra_datap = 0; bool used_extra = false; - int vq = 0, sve_size = 0; + int sve_size = 0; target_restore_general_frame(env, sf); @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, if (sve || size < sizeof(struct target_sve_context)) { goto err; } - if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { - vq = sve_vq(env); - sve_size = QEMU_ALIGN_UP(TARGET_SVE_SIG_CONTEXT_SIZE(vq), 16); - if (size == sve_size) { - sve = (struct target_sve_context *)ctx; - break; - } - } - goto err; + sve = (struct target_sve_context *)ctx; + sve_size = size; + break; case TARGET_EXTRA_MAGIC: if (extra || size != sizeof(struct target_extra_context)) { @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, } /* SVE data, if present, overwrites FPSIMD data. */ - if (sve) { - target_restore_sve_record(env, sve, vq); + if (sve && !target_restore_sve_record(env, sve, sve_size)) { + goto err; } unlock_user(extra, extra_datap, 0); return 0; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Set the SM bit in the SVE record on signal delivery, create the ZA record. Restore SM and ZA state according to the records present on return. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-41-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 167 +++++++++++++++++++++++++++++++++--- 1 file changed, 154 insertions(+), 13 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ struct target_sve_context { #define TARGET_SVE_SIG_FLAG_SM 1 +#define TARGET_ZA_MAGIC 0x54366345 + +struct target_za_context { + struct target_aarch64_ctx head; + uint16_t vl; + uint16_t reserved[3]; + /* The actual ZA data immediately follows. */ +}; + +#define TARGET_ZA_SIG_REGS_OFFSET \ + QEMU_ALIGN_UP(sizeof(struct target_za_context), TARGET_SVE_VQ_BYTES) +#define TARGET_ZA_SIG_ZAV_OFFSET(VQ, N) \ + (TARGET_ZA_SIG_REGS_OFFSET + (VQ) * TARGET_SVE_VQ_BYTES * (N)) +#define TARGET_ZA_SIG_CONTEXT_SIZE(VQ) \ + TARGET_ZA_SIG_ZAV_OFFSET(VQ, VQ * TARGET_SVE_VQ_BYTES) + struct target_rt_sigframe { struct target_siginfo info; struct target_ucontext uc; @@ -XXX,XX +XXX,XX @@ static void target_setup_end_record(struct target_aarch64_ctx *end) } static void target_setup_sve_record(struct target_sve_context *sve, - CPUARMState *env, int vq, int size) + CPUARMState *env, int size) { - int i, j; + int i, j, vq = sve_vq(env); memset(sve, 0, sizeof(*sve)); __put_user(TARGET_SVE_MAGIC, &sve->head.magic); @@ -XXX,XX +XXX,XX @@ static void target_setup_sve_record(struct target_sve_context *sve, } } +static void target_setup_za_record(struct target_za_context *za, + CPUARMState *env, int size) +{ + int vq = sme_vq(env); + int vl = vq * TARGET_SVE_VQ_BYTES; + int i, j; + + memset(za, 0, sizeof(*za)); + __put_user(TARGET_ZA_MAGIC, &za->head.magic); + __put_user(size, &za->head.size); + __put_user(vl, &za->vl); + + if (size == TARGET_ZA_SIG_CONTEXT_SIZE(0)) { + return; + } + assert(size == TARGET_ZA_SIG_CONTEXT_SIZE(vq)); + + /* + * Note that ZA vectors are stored as a byte stream, + * with each byte element at a subsequent address. + */ + for (i = 0; i < vl; ++i) { + uint64_t *z = (void *)za + TARGET_ZA_SIG_ZAV_OFFSET(vq, i); + for (j = 0; j < vq * 2; ++j) { + __put_user_e(env->zarray[i].d[j], z + j, le); + } + } +} + static void target_restore_general_frame(CPUARMState *env, struct target_rt_sigframe *sf) { @@ -XXX,XX +XXX,XX @@ static void target_restore_fpsimd_record(CPUARMState *env, static bool target_restore_sve_record(CPUARMState *env, struct target_sve_context *sve, - int size) + int size, int *svcr) { - int i, j, vl, vq; + int i, j, vl, vq, flags; + bool sm; - if (!cpu_isar_feature(aa64_sve, env_archcpu(env))) { + __get_user(vl, &sve->vl); + __get_user(flags, &sve->flags); + + sm = flags & TARGET_SVE_SIG_FLAG_SM; + + /* The cpu must support Streaming or Non-streaming SVE. */ + if (sm + ? !cpu_isar_feature(aa64_sme, env_archcpu(env)) + : !cpu_isar_feature(aa64_sve, env_archcpu(env))) { return false; } - __get_user(vl, &sve->vl); - vq = sve_vq(env); + /* + * Note that we cannot use sve_vq() because that depends on the + * current setting of PSTATE.SM, not the state to be restored. + */ + vq = sve_vqm1_for_el_sm(env, 0, sm) + 1; /* Reject mismatched VL. */ if (vl != vq * TARGET_SVE_VQ_BYTES) { @@ -XXX,XX +XXX,XX @@ static bool target_restore_sve_record(CPUARMState *env, return false; } + *svcr = FIELD_DP64(*svcr, SVCR, SM, sm); + /* * Note that SVE regs are stored as a byte stream, with each byte element * at a subsequent address. This corresponds to a little-endian load @@ -XXX,XX +XXX,XX @@ static bool target_restore_sve_record(CPUARMState *env, return true; } +static bool target_restore_za_record(CPUARMState *env, + struct target_za_context *za, + int size, int *svcr) +{ + int i, j, vl, vq; + + if (!cpu_isar_feature(aa64_sme, env_archcpu(env))) { + return false; + } + + __get_user(vl, &za->vl); + vq = sme_vq(env); + + /* Reject mismatched VL. */ + if (vl != vq * TARGET_SVE_VQ_BYTES) { + return false; + } + + /* Accept empty record -- used to clear PSTATE.ZA. */ + if (size <= TARGET_ZA_SIG_CONTEXT_SIZE(0)) { + return true; + } + + /* Reject non-empty but incomplete record. */ + if (size < TARGET_ZA_SIG_CONTEXT_SIZE(vq)) { + return false; + } + + *svcr = FIELD_DP64(*svcr, SVCR, ZA, 1); + + for (i = 0; i < vl; ++i) { + uint64_t *z = (void *)za + TARGET_ZA_SIG_ZAV_OFFSET(vq, i); + for (j = 0; j < vq * 2; ++j) { + __get_user_e(env->zarray[i].d[j], z + j, le); + } + } + return true; +} + static int target_restore_sigframe(CPUARMState *env, struct target_rt_sigframe *sf) { struct target_aarch64_ctx *ctx, *extra = NULL; struct target_fpsimd_context *fpsimd = NULL; struct target_sve_context *sve = NULL; + struct target_za_context *za = NULL; uint64_t extra_datap = 0; bool used_extra = false; int sve_size = 0; + int za_size = 0; + int svcr = 0; target_restore_general_frame(env, sf); @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, sve_size = size; break; + case TARGET_ZA_MAGIC: + if (za || size < sizeof(struct target_za_context)) { + goto err; + } + za = (struct target_za_context *)ctx; + za_size = size; + break; + case TARGET_EXTRA_MAGIC: if (extra || size != sizeof(struct target_extra_context)) { goto err; @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, } /* SVE data, if present, overwrites FPSIMD data. */ - if (sve && !target_restore_sve_record(env, sve, sve_size)) { + if (sve && !target_restore_sve_record(env, sve, sve_size, &svcr)) { goto err; } + if (za && !target_restore_za_record(env, za, za_size, &svcr)) { + goto err; + } + if (env->svcr != svcr) { + env->svcr = svcr; + arm_rebuild_hflags(env); + } unlock_user(extra, extra_datap, 0); return 0; @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, .total_size = offsetof(struct target_rt_sigframe, uc.tuc_mcontext.__reserved), }; - int fpsimd_ofs, fr_ofs, sve_ofs = 0, vq = 0, sve_size = 0; + int fpsimd_ofs, fr_ofs, sve_ofs = 0, za_ofs = 0; + int sve_size = 0, za_size = 0; struct target_rt_sigframe *frame; struct target_rt_frame_record *fr; abi_ulong frame_addr, return_addr; @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, &layout); /* SVE state needs saving only if it exists. */ - if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { - vq = sve_vq(env); - sve_size = QEMU_ALIGN_UP(TARGET_SVE_SIG_CONTEXT_SIZE(vq), 16); + if (cpu_isar_feature(aa64_sve, env_archcpu(env)) || + cpu_isar_feature(aa64_sme, env_archcpu(env))) { + sve_size = QEMU_ALIGN_UP(TARGET_SVE_SIG_CONTEXT_SIZE(sve_vq(env)), 16); sve_ofs = alloc_sigframe_space(sve_size, &layout); } + if (cpu_isar_feature(aa64_sme, env_archcpu(env))) { + /* ZA state needs saving only if it is enabled. */ + if (FIELD_EX64(env->svcr, SVCR, ZA)) { + za_size = TARGET_ZA_SIG_CONTEXT_SIZE(sme_vq(env)); + } else { + za_size = TARGET_ZA_SIG_CONTEXT_SIZE(0); + } + za_ofs = alloc_sigframe_space(za_size, &layout); + } if (layout.extra_ofs) { /* Reserve space for the extra end marker. The standard end marker @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, target_setup_end_record((void *)frame + layout.extra_end_ofs); } if (sve_ofs) { - target_setup_sve_record((void *)frame + sve_ofs, env, vq, sve_size); + target_setup_sve_record((void *)frame + sve_ofs, env, sve_size); + } + if (za_ofs) { + target_setup_za_record((void *)frame + za_ofs, env, za_size); } /* Set up the stack frame for unwinding. */ @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, env->btype = 2; } + /* + * Invoke the signal handler with both SM and ZA disabled. + * When clearing SM, ResetSVEState, per SMSTOP. + */ + if (FIELD_EX64(env->svcr, SVCR, SM)) { + arm_reset_sve_state(env); + } + if (env->svcr) { + env->svcr = 0; + arm_rebuild_hflags(env); + } + if (info) { tswap_siginfo(&frame->info, info); env->xregs[1] = frame_addr + offsetof(struct target_rt_sigframe, info); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add "sve" to the sve prctl functions, to distinguish them from the coming "sme" prctls with similar names. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-42-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 8 ++++---- linux-user/syscall.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ #ifndef AARCH64_TARGET_PRCTL_H #define AARCH64_TARGET_PRCTL_H -static abi_long do_prctl_get_vl(CPUArchState *env) +static abi_long do_prctl_sve_get_vl(CPUArchState *env) { ARMCPU *cpu = env_archcpu(env); if (cpu_isar_feature(aa64_sve, cpu)) { @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_get_vl(CPUArchState *env) } return -TARGET_EINVAL; } -#define do_prctl_get_vl do_prctl_get_vl +#define do_prctl_sve_get_vl do_prctl_sve_get_vl -static abi_long do_prctl_set_vl(CPUArchState *env, abi_long arg2) +static abi_long do_prctl_sve_set_vl(CPUArchState *env, abi_long arg2) { /* * We cannot support either PR_SVE_SET_VL_ONEXEC or PR_SVE_VL_INHERIT. @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_set_vl(CPUArchState *env, abi_long arg2) } return -TARGET_EINVAL; } -#define do_prctl_set_vl do_prctl_set_vl +#define do_prctl_sve_set_vl do_prctl_sve_set_vl static abi_long do_prctl_reset_keys(CPUArchState *env, abi_long arg2) { diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_inval1(CPUArchState *env, abi_long arg2) #ifndef do_prctl_set_fp_mode #define do_prctl_set_fp_mode do_prctl_inval1 #endif -#ifndef do_prctl_get_vl -#define do_prctl_get_vl do_prctl_inval0 +#ifndef do_prctl_sve_get_vl +#define do_prctl_sve_get_vl do_prctl_inval0 #endif -#ifndef do_prctl_set_vl -#define do_prctl_set_vl do_prctl_inval1 +#ifndef do_prctl_sve_set_vl +#define do_prctl_sve_set_vl do_prctl_inval1 #endif #ifndef do_prctl_reset_keys #define do_prctl_reset_keys do_prctl_inval1 @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl(CPUArchState *env, abi_long option, abi_long arg2, case PR_SET_FP_MODE: return do_prctl_set_fp_mode(env, arg2); case PR_SVE_GET_VL: - return do_prctl_get_vl(env); + return do_prctl_sve_get_vl(env); case PR_SVE_SET_VL: - return do_prctl_set_vl(env, arg2); + return do_prctl_sve_set_vl(env, arg2); case PR_PAC_RESET_KEYS: if (arg3 || arg4 || arg5) { return -TARGET_EINVAL; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> These prctl set the Streaming SVE vector length, which may be completely different from the Normal SVE vector length. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-43-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 54 +++++++++++++++++++++++++++++++ linux-user/syscall.c | 16 +++++++++ 2 files changed, 70 insertions(+) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_sve_get_vl(CPUArchState *env) { ARMCPU *cpu = env_archcpu(env); if (cpu_isar_feature(aa64_sve, cpu)) { + /* PSTATE.SM is always unset on syscall entry. */ return sve_vq(env) * 16; } return -TARGET_EINVAL; @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_sve_set_vl(CPUArchState *env, abi_long arg2) && arg2 >= 0 && arg2 <= 512 * 16 && !(arg2 & 15)) { uint32_t vq, old_vq; + /* PSTATE.SM is always unset on syscall entry. */ old_vq = sve_vq(env); /* @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_sve_set_vl(CPUArchState *env, abi_long arg2) } #define do_prctl_sve_set_vl do_prctl_sve_set_vl +static abi_long do_prctl_sme_get_vl(CPUArchState *env) +{ + ARMCPU *cpu = env_archcpu(env); + if (cpu_isar_feature(aa64_sme, cpu)) { + return sme_vq(env) * 16; + } + return -TARGET_EINVAL; +} +#define do_prctl_sme_get_vl do_prctl_sme_get_vl + +static abi_long do_prctl_sme_set_vl(CPUArchState *env, abi_long arg2) +{ + /* + * We cannot support either PR_SME_SET_VL_ONEXEC or PR_SME_VL_INHERIT. + * Note the kernel definition of sve_vl_valid allows for VQ=512, + * i.e. VL=8192, even though the architectural maximum is VQ=16. + */ + if (cpu_isar_feature(aa64_sme, env_archcpu(env)) + && arg2 >= 0 && arg2 <= 512 * 16 && !(arg2 & 15)) { + int vq, old_vq; + + old_vq = sme_vq(env); + + /* + * Bound the value of vq, so that we know that it fits into + * the 4-bit field in SMCR_EL1. Because PSTATE.SM is cleared + * on syscall entry, we are not modifying the current SVE + * vector length. + */ + vq = MAX(arg2 / 16, 1); + vq = MIN(vq, 16); + env->vfp.smcr_el[1] = + FIELD_DP64(env->vfp.smcr_el[1], SMCR, LEN, vq - 1); + + /* Delay rebuilding hflags until we know if ZA must change. */ + vq = sve_vqm1_for_el_sm(env, 0, true) + 1; + + if (vq != old_vq) { + /* + * PSTATE.ZA state is cleared on any change to SVL. + * We need not call arm_rebuild_hflags because PSTATE.SM was + * cleared on syscall entry, so this hasn't changed VL. + */ + env->svcr = FIELD_DP64(env->svcr, SVCR, ZA, 0); + arm_rebuild_hflags(env); + } + return vq * 16; + } + return -TARGET_EINVAL; +} +#define do_prctl_sme_set_vl do_prctl_sme_set_vl + static abi_long do_prctl_reset_keys(CPUArchState *env, abi_long arg2) { ARMCPU *cpu = env_archcpu(env); diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_arch_prctl(CPUX86State *env, int code, abi_ulong addr) #ifndef PR_SET_SYSCALL_USER_DISPATCH # define PR_SET_SYSCALL_USER_DISPATCH 59 #endif +#ifndef PR_SME_SET_VL +# define PR_SME_SET_VL 63 +# define PR_SME_GET_VL 64 +# define PR_SME_VL_LEN_MASK 0xffff +# define PR_SME_VL_INHERIT (1 << 17) +#endif #include "target_prctl.h" @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_inval1(CPUArchState *env, abi_long arg2) #ifndef do_prctl_set_unalign #define do_prctl_set_unalign do_prctl_inval1 #endif +#ifndef do_prctl_sme_get_vl +#define do_prctl_sme_get_vl do_prctl_inval0 +#endif +#ifndef do_prctl_sme_set_vl +#define do_prctl_sme_set_vl do_prctl_inval1 +#endif static abi_long do_prctl(CPUArchState *env, abi_long option, abi_long arg2, abi_long arg3, abi_long arg4, abi_long arg5) @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl(CPUArchState *env, abi_long option, abi_long arg2, return do_prctl_sve_get_vl(env); case PR_SVE_SET_VL: return do_prctl_sve_set_vl(env, arg2); + case PR_SME_GET_VL: + return do_prctl_sme_get_vl(env); + case PR_SME_SET_VL: + return do_prctl_sme_set_vl(env, arg2); case PR_PAC_RESET_KEYS: if (arg3 || arg4 || arg5) { return -TARGET_EINVAL; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> There's no reason to set CPACR_EL1.ZEN if SVE disabled. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-44-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, CPACR_EL1, FPEN, 3); - /* and to the SVE instructions */ - env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, - CPACR_EL1, ZEN, 3); - /* with reasonable vector length */ + /* and to the SVE instructions, with default vector length */ if (cpu_isar_feature(aa64_sve, cpu)) { + env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, + CPACR_EL1, ZEN, 3); env->vfp.zcr_el[1] = cpu->sve_default_vq - 1; } /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable SME, TPIDR2_EL0, and FA64 if supported by the cpu. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-45-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) CPACR_EL1, ZEN, 3); env->vfp.zcr_el[1] = cpu->sve_default_vq - 1; } + /* and for SME instructions, with default vector length, and TPIDR2 */ + if (cpu_isar_feature(aa64_sme, cpu)) { + env->cp15.sctlr_el[1] |= SCTLR_EnTP2; + env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, + CPACR_EL1, SMEN, 3); + env->vfp.smcr_el[1] = cpu->sme_default_vq - 1; + if (cpu_isar_feature(aa64_sme_fa64, cpu)) { + env->vfp.smcr_el[1] = FIELD_DP64(env->vfp.smcr_el[1], + SMCR, FA64, 1); + } + } /* * Enable 48-bit address space (TODO: take reserved_va into account). * Enable TBI0 but not TBI1. -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-46-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ enum { ARM_HWCAP2_A64_RNG = 1 << 16, ARM_HWCAP2_A64_BTI = 1 << 17, ARM_HWCAP2_A64_MTE = 1 << 18, + ARM_HWCAP2_A64_ECV = 1 << 19, + ARM_HWCAP2_A64_AFP = 1 << 20, + ARM_HWCAP2_A64_RPRES = 1 << 21, + ARM_HWCAP2_A64_MTE3 = 1 << 22, + ARM_HWCAP2_A64_SME = 1 << 23, + ARM_HWCAP2_A64_SME_I16I64 = 1 << 24, + ARM_HWCAP2_A64_SME_F64F64 = 1 << 25, + ARM_HWCAP2_A64_SME_I8I32 = 1 << 26, + ARM_HWCAP2_A64_SME_F16F32 = 1 << 27, + ARM_HWCAP2_A64_SME_B16F32 = 1 << 28, + ARM_HWCAP2_A64_SME_F32F32 = 1 << 29, + ARM_HWCAP2_A64_SME_FA64 = 1 << 30, }; #define ELF_HWCAP get_elf_hwcap() @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap2(void) GET_FEATURE_ID(aa64_rndr, ARM_HWCAP2_A64_RNG); GET_FEATURE_ID(aa64_bti, ARM_HWCAP2_A64_BTI); GET_FEATURE_ID(aa64_mte, ARM_HWCAP2_A64_MTE); + GET_FEATURE_ID(aa64_sme, (ARM_HWCAP2_A64_SME | + ARM_HWCAP2_A64_SME_F32F32 | + ARM_HWCAP2_A64_SME_B16F32 | + ARM_HWCAP2_A64_SME_F16F32 | + ARM_HWCAP2_A64_SME_I8I32)); + GET_FEATURE_ID(aa64_sme_f64f64, ARM_HWCAP2_A64_SME_F64F64); + GET_FEATURE_ID(aa64_sme_i16i64, ARM_HWCAP2_A64_SME_I16I64); + GET_FEATURE_ID(aa64_sme_fa64, ARM_HWCAP2_A64_SME_FA64); return hwcaps; } -- 2.25.1