Nothing much exciting here, but it's 37 patches worth... thanks -- PMM The following changes since commit e64a62df378a746c0b257105959613c9f8122e59: Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-040320-1' into staging (2020-03-05 12:13:51 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200305 for you to fetch changes up to 597d61a3b1f94c53a3aaa77671697c0c5f797dbf: target/arm: Clean address for DC ZVA (2020-03-05 16:09:21 +0000) ---------------------------------------------------------------- * versal: Implement ADMA * Implement (trivially) ARMv8.2-TTCNP * hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus * Remove unnecessary endianness-handling on some boards * Avoid minor memory leaks from timer_new in some devices * Honour more of the HCR_EL2 trap bits * Complain rather than ignoring bad command line options for cubieboard * Honour TBI for DC ZVA and exception return ---------------------------------------------------------------- Edgar E. Iglesias (2): hw/arm: versal: Add support for the LPD ADMAs hw/arm: versal: Generate xlnx-versal-virt zdma FDT nodes Eric Auger (1): hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus Niek Linnenbank (4): hw/arm/cubieboard: use ARM Cortex-A8 as the default CPU in machine definition hw/arm/cubieboard: restrict allowed CPU type to ARM Cortex-A8 hw/arm/cubieboard: restrict allowed RAM size to 512MiB and 1GiB hw/arm/cubieboard: report error when using unsupported -bios argument Pan Nengyuan (4): hw/arm/pxa2xx: move timer_new from init() into realize() to avoid memleaks hw/arm/spitz: move timer_new from init() into realize() to avoid memleaks hw/arm/strongarm: move timer_new from init() into realize() to avoid memleaks hw/timer/cadence_ttc: move timer_new from init() into realize() to avoid memleaks Peter Maydell (1): target/arm: Implement (trivially) ARMv8.2-TTCNP Philippe Mathieu-Daudé (6): hw/arm/smmu-common: Simplify smmu_find_smmu_pcibus() logic hw/arm/gumstix: Simplify since the machines are little-endian only hw/arm/mainstone: Simplify since the machines are little-endian only hw/arm/omap_sx1: Simplify since the machines are little-endian only hw/arm/z2: Simplify since the machines are little-endian only hw/arm/musicpal: Simplify since the machines are little-endian only Richard Henderson (19): target/arm: Improve masking of HCR/HCR2 RES0 bits target/arm: Add HCR_EL2 bit definitions from ARMv8.6 target/arm: Disable has_el2 and has_el3 for user-only target/arm: Remove EL2 and EL3 setup from user-only target/arm: Improve masking in arm_hcr_el2_eff target/arm: Honor the HCR_EL2.{TVM,TRVM} bits target/arm: Honor the HCR_EL2.TSW bit target/arm: Honor the HCR_EL2.TACR bit target/arm: Honor the HCR_EL2.TPCP bit target/arm: Honor the HCR_EL2.TPU bit target/arm: Honor the HCR_EL2.TTLB bit tests/tcg/aarch64: Add newline in pauth-1 printf target/arm: Replicate TBI/TBID bits for single range regimes target/arm: Optimize cpu_mmu_index target/arm: Introduce core_to_aa64_mmu_idx target/arm: Apply TBI to ESR_ELx in helper_exception_return target/arm: Move helper_dc_zva to helper-a64.c target/arm: Use DEF_HELPER_FLAGS for helper_dc_zva target/arm: Clean address for DC ZVA include/hw/arm/xlnx-versal.h | 6 + target/arm/cpu.h | 30 ++-- target/arm/helper-a64.h | 1 + target/arm/helper.h | 1 - target/arm/internals.h | 6 + hw/arm/cubieboard.c | 29 +++- hw/arm/gumstix.c | 16 +- hw/arm/mainstone.c | 8 +- hw/arm/musicpal.c | 10 -- hw/arm/omap_sx1.c | 11 +- hw/arm/pxa2xx.c | 17 +- hw/arm/smmu-common.c | 20 +-- hw/arm/spitz.c | 8 +- hw/arm/strongarm.c | 18 ++- hw/arm/xlnx-versal-virt.c | 28 ++++ hw/arm/xlnx-versal.c | 24 +++ hw/arm/z2.c | 8 +- hw/timer/cadence_ttc.c | 18 ++- target/arm/cpu.c | 13 +- target/arm/cpu64.c | 2 + target/arm/helper-a64.c | 114 ++++++++++++- target/arm/helper.c | 373 ++++++++++++++++++++++++++++++------------- target/arm/op_helper.c | 93 ----------- target/arm/translate-a64.c | 4 +- tests/tcg/aarch64/pauth-1.c | 2 +- 25 files changed, 551 insertions(+), 309 deletions(-) From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Add support for the Versal LPD ADMAs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 6 ++++++ hw/arm/xlnx-versal.c | 24 ++++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #define XLNX_VERSAL_NR_ACPUS 2 #define XLNX_VERSAL_NR_UARTS 2 #define XLNX_VERSAL_NR_GEMS 2 +#define XLNX_VERSAL_NR_ADMAS 8 #define XLNX_VERSAL_NR_IRQS 192 typedef struct Versal { @@ -XXX,XX +XXX,XX @@ typedef struct Versal { struct { SysBusDevice *uart[XLNX_VERSAL_NR_UARTS]; SysBusDevice *gem[XLNX_VERSAL_NR_GEMS]; + SysBusDevice *adma[XLNX_VERSAL_NR_ADMAS]; } iou; } lpd; @@ -XXX,XX +XXX,XX @@ typedef struct Versal { #define VERSAL_GEM0_WAKE_IRQ_0 57 #define VERSAL_GEM1_IRQ_0 58 #define VERSAL_GEM1_WAKE_IRQ_0 59 +#define VERSAL_ADMA_IRQ_0 60 /* Architecturally reserved IRQs suitable for virtualization. */ #define VERSAL_RSVD_IRQ_FIRST 111 @@ -XXX,XX +XXX,XX @@ typedef struct Versal { #define MM_GEM1 0xff0d0000U #define MM_GEM1_SIZE 0x10000 +#define MM_ADMA_CH0 0xffa80000U +#define MM_ADMA_CH0_SIZE 0x10000 + #define MM_OCM 0xfffc0000U #define MM_OCM_SIZE 0x40000 diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_gems(Versal *s, qemu_irq *pic) } } +static void versal_create_admas(Versal *s, qemu_irq *pic) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.adma); i++) { + char *name = g_strdup_printf("adma%d", i); + DeviceState *dev; + MemoryRegion *mr; + + dev = qdev_create(NULL, "xlnx.zdma"); + s->lpd.iou.adma[i] = SYS_BUS_DEVICE(dev); + object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); + qdev_init_nofail(dev); + + mr = sysbus_mmio_get_region(s->lpd.iou.adma[i], 0); + memory_region_add_subregion(&s->mr_ps, + MM_ADMA_CH0 + i * MM_ADMA_CH0_SIZE, mr); + + sysbus_connect_irq(s->lpd.iou.adma[i], 0, pic[VERSAL_ADMA_IRQ_0 + i]); + g_free(name); + } +} + /* This takes the board allocated linear DDR memory and creates aliases * for each split DDR range/aperture on the Versal address map. */ @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_apu_gic(s, pic); versal_create_uarts(s, pic); versal_create_gems(s, pic); + versal_create_admas(s, pic); versal_map_ddr(s); versal_unimp(s); -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Generate xlnx-versal-virt zdma FDT nodes. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-versal-virt.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_gem_nodes(VersalVirt *s) } } +static void fdt_add_zdma_nodes(VersalVirt *s) +{ + const char clocknames[] = "clk_main\0clk_apb"; + const char compat[] = "xlnx,zynqmp-dma-1.0"; + int i; + + for (i = XLNX_VERSAL_NR_ADMAS - 1; i >= 0; i--) { + uint64_t addr = MM_ADMA_CH0 + MM_ADMA_CH0_SIZE * i; + char *name = g_strdup_printf("/dma@%" PRIx64, addr); + + qemu_fdt_add_subnode(s->fdt, name); + + qemu_fdt_setprop_cell(s->fdt, name, "xlnx,bus-width", 64); + qemu_fdt_setprop_cells(s->fdt, name, "clocks", + s->phandle.clk_25Mhz, s->phandle.clk_25Mhz); + qemu_fdt_setprop(s->fdt, name, "clock-names", + clocknames, sizeof(clocknames)); + qemu_fdt_setprop_cells(s->fdt, name, "interrupts", + GIC_FDT_IRQ_TYPE_SPI, VERSAL_ADMA_IRQ_0 + i, + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, addr, 2, 0x1000); + qemu_fdt_setprop(s->fdt, name, "compatible", compat, sizeof(compat)); + g_free(name); + } +} + static void fdt_nop_memory_nodes(void *fdt, Error **errp) { Error *err = NULL; @@ -XXX,XX +XXX,XX @@ static void versal_virt_init(MachineState *machine) fdt_add_uart_nodes(s); fdt_add_gic_nodes(s); fdt_add_timer_nodes(s); + fdt_add_zdma_nodes(s); fdt_add_cpu_nodes(s, psci_conduit); fdt_add_clk_node(s, "/clk125", 125000000, s->phandle.clk_125Mhz); fdt_add_clk_node(s, "/clk25", 25000000, s->phandle.clk_25Mhz); -- 2.20.1 The ARMv8.2-TTCNP extension allows an implementation to optimize by sharing TLB entries between multiple cores, provided that software declares that it's ready to deal with this by setting a CnP bit in the TTBRn_ELx. It is mandatory from ARMv8.2 onward. For QEMU's TLB implementation, sharing TLB entries between different cores would not really benefit us and would be a lot of work to implement. So we implement this extension in the "trivial" manner: we allow the guest to set and read back the CnP bit, but don't change our behaviour (this is an architecturally valid implementation choice). The only code path which looks at the TTBRn_ELx values for the long-descriptor format where the CnP bit is defined is already doing enough masking to not get confused when the CnP bit at the bottom of the register is set, so we can simply add a comment noting why we're relying on that mask. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200225193822.18874-1-peter.maydell@linaro.org --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 2 ++ target/arm/helper.c | 4 ++++ 3 files changed, 7 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = cpu->isar.id_mmfr4; t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ cpu->isar.id_mmfr4 = t; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); + t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ cpu->isar.id_aa64mmfr2 = t; /* Replicate the same data to the 32-bit id registers. */ @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) u = cpu->isar.id_mmfr4; u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + u = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ cpu->isar.id_mmfr4 = u; u = cpu->isar.id_aa64dfr0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, /* Now we can extract the actual base address from the TTBR */ descaddr = extract64(ttbr, 0, 48); + /* + * We rely on this masking to clear the RES0 bits at the bottom of the TTBR + * and also to mask out CnP (bit 0) which could validly be non-zero. + */ descaddr &= ~indexmask; /* The address field in the descriptor goes up to bit 39 for ARMv7 -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Make sure a null SMMUPciBus is returned in case we were not able to identify a pci bus matching the @bus_num. This matches the fix done on intel iommu in commit: a2e1cd41ccfe796529abfd1b6aeb1dd4393762a2 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200226172628.17449-1-eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUPciBus *smmu_find_smmu_pcibus(SMMUState *s, uint8_t bus_num) return smmu_pci_bus; } } + smmu_pci_bus = NULL; } return smmu_pci_bus; } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The smmu_find_smmu_pcibus() function was introduced (in commit cac994ef43b) in a code format that could return an incorrect pointer, which was then fixed by the previous commit. We could have avoided this by writing the if() statement differently. Do it now, in case this function is re-used. The code is easier to review (harder to miss bugs). Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, SMMUPciBus *smmu_find_smmu_pcibus(SMMUState *s, uint8_t bus_num) { SMMUPciBus *smmu_pci_bus = s->smmu_pcibus_by_bus_num[bus_num]; + GHashTableIter iter; - if (!smmu_pci_bus) { - GHashTableIter iter; - - g_hash_table_iter_init(&iter, s->smmu_pcibus_by_busptr); - while (g_hash_table_iter_next(&iter, NULL, (void **)&smmu_pci_bus)) { - if (pci_bus_num(smmu_pci_bus->bus) == bus_num) { - s->smmu_pcibus_by_bus_num[bus_num] = smmu_pci_bus; - return smmu_pci_bus; - } - } - smmu_pci_bus = NULL; + if (smmu_pci_bus) { + return smmu_pci_bus; } - return smmu_pci_bus; + + g_hash_table_iter_init(&iter, s->smmu_pcibus_by_busptr); + while (g_hash_table_iter_next(&iter, NULL, (void **)&smmu_pci_bus)) { + if (pci_bus_num(smmu_pci_bus->bus) == bus_num) { + s->smmu_pcibus_by_bus_num[bus_num] = smmu_pci_bus; + return smmu_pci_bus; + } + } + + return NULL; } static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As the Connex and Verdex machines only boot in little-endian, we can simplify the code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - int be; MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, be)) { + sector_len, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - int be; MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, be)) { + sector_len, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, DeviceState *mst_irq; DriveInfo *dinfo; int i; - int be; MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, memory_region_set_readonly(rom, true); memory_region_add_subregion(address_space_mem, 0, rom); -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, i ? "mainstone.flash1" : "mainstone.flash0", MAINSTONE_FLASH, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, be)) { + sector_len, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) DriveInfo *dinfo; int fl_idx; uint32_t flash_size = flash0_size; - int be; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) OMAP_CS2_BASE, &cs[3]); fl_idx = 0; -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif - if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, be)) { + sector_size, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS1_BASE, "omap_sx1.flash1-1", flash1_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, be)) { + sector_size, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; - int be; void *z2_lcd; I2CBus *bus; DeviceState *wm; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) /* Setup CPU & memory */ mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, be)) { + sector_len, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) * 0xFF800000 (if there is 8 MB flash). So remap flash access if the * image is smaller than 32 MB. */ -#ifdef TARGET_WORDS_BIGENDIAN - pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, - "musicpal.flash", flash_size, - blk, 0x10000, - MP_FLASH_SIZE_MAX / flash_size, - 2, 0x00BF, 0x236D, 0x0000, 0x0000, - 0x5555, 0x2AAA, 1); -#else pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, blk, 0x10000, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -#endif - } sysbus_create_simple(TYPE_MV88W8618_FLASHCFG, MP_FLASHCFG_BASE, NULL); -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-3-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_init(Object *obj) s->last_rtcpicr = 0; s->last_hz = s->last_sw = s->last_pi = qemu_clock_get_ms(rtc_clock); + sysbus_init_irq(dev, &s->rtc_irq); + + memory_region_init_io(&s->iomem, obj, &pxa2xx_rtc_ops, s, + "pxa2xx-rtc", 0x10000); + sysbus_init_mmio(dev, &s->iomem); +} + +static void pxa2xx_rtc_realize(DeviceState *dev, Error **errp) +{ + PXA2xxRTCState *s = PXA2XX_RTC(dev); s->rtc_hz = timer_new_ms(rtc_clock, pxa2xx_rtc_hz_tick, s); s->rtc_rdal1 = timer_new_ms(rtc_clock, pxa2xx_rtc_rdal1_tick, s); s->rtc_rdal2 = timer_new_ms(rtc_clock, pxa2xx_rtc_rdal2_tick, s); s->rtc_swal1 = timer_new_ms(rtc_clock, pxa2xx_rtc_swal1_tick, s); s->rtc_swal2 = timer_new_ms(rtc_clock, pxa2xx_rtc_swal2_tick, s); s->rtc_pi = timer_new_ms(rtc_clock, pxa2xx_rtc_pi_tick, s); - - sysbus_init_irq(dev, &s->rtc_irq); - - memory_region_init_io(&s->iomem, obj, &pxa2xx_rtc_ops, s, - "pxa2xx-rtc", 0x10000); - sysbus_init_mmio(dev, &s->iomem); } static int pxa2xx_rtc_pre_save(void *opaque) @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_sysbus_class_init(ObjectClass *klass, void *data) dc->desc = "PXA2xx RTC Controller"; dc->vmsd = &vmstate_pxa2xx_rtc_regs; + dc->realize = pxa2xx_rtc_realize; } static const TypeInfo pxa2xx_rtc_sysbus_info = { -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-4-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/spitz.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_init(Object *obj) spitz_keyboard_pre_map(s); - s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); } +static void spitz_keyboard_realize(DeviceState *dev, Error **errp) +{ + SpitzKeyboardState *s = SPITZ_KEYBOARD(dev); + s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); +} + /* LCD backlight controller */ #define LCDTG_RESCTL 0x00 @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_spitz_kbd; + dc->realize = spitz_keyboard_realize; } static const TypeInfo spitz_keyboard_info = { -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-5-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/strongarm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_init(Object *obj) s->last_rcnr = (uint32_t) mktimegm(&tm); s->last_hz = qemu_clock_get_ms(rtc_clock); - s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); - s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); - sysbus_init_irq(dev, &s->rtc_irq); sysbus_init_irq(dev, &s->rtc_hz_irq); @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void strongarm_rtc_realize(DeviceState *dev, Error **errp) +{ + StrongARMRTCState *s = STRONGARM_RTC(dev); + s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); + s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); +} + static int strongarm_rtc_pre_save(void *opaque) { StrongARMRTCState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data) dc->desc = "StrongARM RTC Controller"; dc->vmsd = &vmstate_strongarm_rtc_regs; + dc->realize = strongarm_rtc_realize; } static const TypeInfo strongarm_rtc_sysbus_info = { @@ -XXX,XX +XXX,XX @@ static void strongarm_uart_init(Object *obj) "uart", 0x10000); sysbus_init_mmio(dev, &s->iomem); sysbus_init_irq(dev, &s->irq); - - s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_rx_to, s); - s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); } static void strongarm_uart_realize(DeviceState *dev, Error **errp) { StrongARMUARTState *s = STRONGARM_UART(dev); + s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + strongarm_uart_rx_to, + s); + s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); qemu_chr_fe_set_handlers(&s->chr, strongarm_uart_can_receive, strongarm_uart_receive, -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200227025055.14341-7-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/cadence_ttc.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/timer/cadence_ttc.c b/hw/timer/cadence_ttc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cadence_ttc.c +++ b/hw/timer/cadence_ttc.c @@ -XXX,XX +XXX,XX @@ static void cadence_timer_init(uint32_t freq, CadenceTimerState *s) static void cadence_ttc_init(Object *obj) { CadenceTTCState *s = CADENCE_TTC(obj); - int i; - - for (i = 0; i < 3; ++i) { - cadence_timer_init(133000000, &s->timer[i]); - sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->timer[i].irq); - } memory_region_init_io(&s->iomem, obj, &cadence_ttc_ops, s, "timer", 0x1000); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void cadence_ttc_realize(DeviceState *dev, Error **errp) +{ + CadenceTTCState *s = CADENCE_TTC(dev); + int i; + + for (i = 0; i < 3; ++i) { + cadence_timer_init(133000000, &s->timer[i]); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->timer[i].irq); + } +} + static int cadence_timer_pre_save(void *opaque) { cadence_timer_sync((CadenceTimerState *)opaque); @@ -XXX,XX +XXX,XX @@ static void cadence_ttc_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_cadence_ttc; + dc->realize = cadence_ttc_realize; } static const TypeInfo cadence_ttc_info = { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Don't merely start with v8.0, handle v7VE as well. Ensure that writes from aarch32 mode do not change bits in the other half of the register. Protect reads of aa64 id registers with ARM_FEATURE_AARCH64. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 38 +++++++++++++++++++++++++------------- 1 file changed, 25 insertions(+), 13 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { REGINFO_SENTINEL }; -static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) +static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) { ARMCPU *cpu = env_archcpu(env); - /* Begin with bits defined in base ARMv8.0. */ - uint64_t valid_mask = MAKE_64BIT_MASK(0, 34); + + if (arm_feature(env, ARM_FEATURE_V8)) { + valid_mask |= MAKE_64BIT_MASK(0, 34); /* ARMv8.0 */ + } else { + valid_mask |= MAKE_64BIT_MASK(0, 28); /* ARMv7VE */ + } if (arm_feature(env, ARM_FEATURE_EL3)) { valid_mask &= ~HCR_HCD; @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) */ valid_mask &= ~HCR_TSC; } - if (cpu_isar_feature(aa64_vh, cpu)) { - valid_mask |= HCR_E2H; - } - if (cpu_isar_feature(aa64_lor, cpu)) { - valid_mask |= HCR_TLOR; - } - if (cpu_isar_feature(aa64_pauth, cpu)) { - valid_mask |= HCR_API | HCR_APK; + + if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (cpu_isar_feature(aa64_vh, cpu)) { + valid_mask |= HCR_E2H; + } + if (cpu_isar_feature(aa64_lor, cpu)) { + valid_mask |= HCR_TLOR; + } + if (cpu_isar_feature(aa64_pauth, cpu)) { + valid_mask |= HCR_API | HCR_APK; + } } /* Clear RES0 bits. */ @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) arm_cpu_update_vfiq(cpu); } +static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) +{ + do_hcr_write(env, value, 0); +} + static void hcr_writehigh(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { /* Handle HCR2 write, i.e. write to high half of HCR_EL2 */ value = deposit64(env->cp15.hcr_el2, 32, 32, value); - hcr_write(env, NULL, value); + do_hcr_write(env, value, MAKE_64BIT_MASK(0, 32)); } static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, { /* Handle HCR write, i.e. write to low half of HCR_EL2 */ value = deposit64(env->cp15.hcr_el2, 0, 32, value); - hcr_write(env, NULL, value); + do_hcr_write(env, value, MAKE_64BIT_MASK(32, 32)); } /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_TERR (1ULL << 36) #define HCR_TEA (1ULL << 37) #define HCR_MIOCNCE (1ULL << 38) +/* RES0 bit 39 */ #define HCR_APK (1ULL << 40) #define HCR_API (1ULL << 41) #define HCR_NV (1ULL << 42) @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_NV2 (1ULL << 45) #define HCR_FWB (1ULL << 46) #define HCR_FIEN (1ULL << 47) +/* RES0 bit 48 */ #define HCR_TID4 (1ULL << 49) #define HCR_TICAB (1ULL << 50) +#define HCR_AMVOFFEN (1ULL << 51) #define HCR_TOCU (1ULL << 52) +#define HCR_ENSCXT (1ULL << 53) #define HCR_TTLBIS (1ULL << 54) #define HCR_TTLBOS (1ULL << 55) #define HCR_ATA (1ULL << 56) #define HCR_DCT (1ULL << 57) +#define HCR_TID5 (1ULL << 58) +#define HCR_TWEDEN (1ULL << 59) +#define HCR_TWEDEL MAKE_64BIT_MASK(60, 4) #define SCR_NS (1U << 0) #define SCR_IRQ (1U << 1) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In arm_cpu_reset, we configure many system registers so that user-only behaves as it should with a minimum of ifdefs. However, we do not set all of the system registers as required for a cpu with EL2 and EL3. Disabling EL2 and EL3 mean that we will not look at those registers, which means that we don't have to worry about configuring them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_reset_hivecs_property = static Property arm_cpu_rvbar_property = DEFINE_PROP_UINT64("rvbar", ARMCPU, rvbar, 0); +#ifndef CONFIG_USER_ONLY static Property arm_cpu_has_el2_property = DEFINE_PROP_BOOL("has_el2", ARMCPU, has_el2, true); static Property arm_cpu_has_el3_property = DEFINE_PROP_BOOL("has_el3", ARMCPU, has_el3, true); +#endif static Property arm_cpu_cfgend_property = DEFINE_PROP_BOOL("cfgend", ARMCPU, cfgend, false); @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) qdev_property_add_static(DEVICE(obj), &arm_cpu_rvbar_property); } +#ifndef CONFIG_USER_ONLY if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { /* Add the has_el3 state CPU property only if EL3 is allowed. This will * prevent "has_el3" from existing on CPUs which cannot support EL3. */ qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el3_property); -#ifndef CONFIG_USER_ONLY object_property_add_link(obj, "secure-memory", TYPE_MEMORY_REGION, (Object **)&cpu->secure_memory, qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_STRONG, &error_abort); -#endif } if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el2_property); } +#endif if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) { cpu->has_pmu = true; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We have disabled EL2 and EL3 for user-only, which means that these registers "don't exist" and should not be set. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Enable all PAC keys. */ env->cp15.sctlr_el[1] |= (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB); - /* Enable all PAC instructions */ - env->cp15.hcr_el2 |= HCR_API; - env->cp15.scr_el3 |= SCR_API; /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3); /* and to the SVE instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); - env->cp15.cptr_el[3] |= CPTR_EZ; /* with maximum vector length */ env->vfp.zcr_el[1] = cpu_isar_feature(aa64_sve, cpu) ? cpu->sve_max_vq - 1 : 0; - env->vfp.zcr_el[2] = env->vfp.zcr_el[1]; - env->vfp.zcr_el[3] = env->vfp.zcr_el[1]; /* * Enable TBI0 and TBI1. While the real kernel only enables TBI0, * turning on both here will produce smaller code and otherwise -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Update the {TGE,E2H} == '11' masking to ARMv8.6. If EL2 is configured for aarch32, disable all of the bits that are RES0 in aarch32 mode. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint64_t arm_hcr_el2_eff(CPUARMState *env) * Since the v8.4 language applies to the entire register, and * appears to be backward compatible, use that. */ - ret = 0; - } else if (ret & HCR_TGE) { - /* These bits are up-to-date as of ARMv8.4. */ + return 0; + } + + /* + * For a cpu that supports both aarch64 and aarch32, we can set bits + * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32. + * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32. + */ + if (!arm_el_is_aa64(env, 2)) { + uint64_t aa32_valid; + + /* + * These bits are up-to-date as of ARMv8.6. + * For HCR, it's easiest to list just the 2 bits that are invalid. + * For HCR2, list those that are valid. + */ + aa32_valid = MAKE_64BIT_MASK(0, 32) & ~(HCR_RW | HCR_TDZ); + aa32_valid |= (HCR_CD | HCR_ID | HCR_TERR | HCR_TEA | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_TTLBIS); + ret &= aa32_valid; + } + + if (ret & HCR_TGE) { + /* These bits are up-to-date as of ARMv8.6. */ if (ret & HCR_E2H) { ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO | HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE | HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU | - HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE); + HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_ENSCXT | + HCR_TTLBIS | HCR_TTLBOS | HCR_TID5); } else { ret |= HCR_FMO | HCR_IMO | HCR_AMO; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits trap EL1 access to various virtual memory controls. Buglink: https://bugs.launchpad.net/bugs/1855072 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 82 ++++++++++++++++++++++++++++++--------------- 1 file changed, 55 insertions(+), 27 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ +static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1) { + uint64_t trap = isread ? HCR_TRVM : HCR_TVM; + if (arm_hcr_el2_eff(env) & trap) { + return CP_ACCESS_TRAP_EL2; + } + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { */ { .name = "CONTEXTIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL1_RW, .secure = ARM_CP_SECSTATE_NS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .secure = ARM_CP_SECSTATE_NS, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, { .name = "CONTEXTIDR_S", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .secure = ARM_CP_SECSTATE_S, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_s), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, REGINFO_SENTINEL @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = CP_ANY, .crn = 3, .crm = CP_ANY, .opc2 = CP_ANY, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5, .access = PL0_W, .type = ARM_CP_NOP }, { .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), offsetof(CPUARMState, cp15.ifar_ns) }, .resetvalue = 0, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { */ { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* MAIR can just read-as-written because we don't implement caches * and so don't need to care about memory attributes. */ { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), + .access = PL1_RW, .accessfn = access_tvm_trvm, + .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), .resetvalue = 0 }, { .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { * handled in the field definitions. */ { .name = "MAIR0", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, .access = PL1_RW, + .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s), offsetof(CPUARMState, cp15.mair0_ns) }, .resetfn = arm_cp_reset_ignore }, { .name = "MAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, .access = PL1_RW, + .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s), offsetof(CPUARMState, cp15.mair1_ns) }, .resetfn = arm_cp_reset_ignore }, @@ -XXX,XX +XXX,XX @@ static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_ALIAS, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s), offsetoflow32(CPUARMState, cp15.dfsr_ns) }, }, { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s), offsetoflow32(CPUARMState, cp15.ifsr_ns) } }, { .name = "DFAR", .cp = 15, .opc1 = 0, .crn = 6, .crm = 0, .opc2 = 0, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.dfar_s), offsetof(CPUARMState, cp15.dfar_ns) } }, { .name = "FAR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), + .access = PL1_RW, .accessfn = access_tvm_trvm, + .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), .resetvalue = 0, }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { static const ARMCPRegInfo vmsa_cp_reginfo[] = { { .name = "ESR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, }, { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0, - .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) } }, { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1, - .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) } }, { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, .writefn = vmsa_tcr_el12_write, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_tcr_el12_write, .resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) }, { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, .raw_writefn = vmsa_ttbcr_raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]), offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { */ static const ARMCPRegInfo ttbcr2_reginfo = { .name = "TTBCR2", .cp = 15, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_ALIAS, .bank_fieldoffsets = { offsetofhigh32(CPUARMState, cp15.tcr_el[3]), offsetofhigh32(CPUARMState, cp15.tcr_el[1]) }, }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lpae_cp_reginfo[] = { /* NOP AMAIR0/1 */ { .name = "AMAIR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* AMAIR1 is mapped to AMAIR_EL1[63:32] */ { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0, .access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s), offsetof(CPUARMState, cp15.par_ns)} }, { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0, - .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_64BIT | ARM_CP_ALIAS, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) }, .writefn = vmsa_ttbr_write, }, { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1, - .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_64BIT | ARM_CP_ALIAS, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) }, .writefn = vmsa_ttbr_write, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .type = ARM_CP_NOP, .access = PL1_W }, /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo sctlr = { .name = "SCTLR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), offsetof(CPUARMState, cp15.sctlr_ns) }, .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits trap EL1 access to set/way cache maintenance insns. Buglink: https://bugs.launchpad.net/bugs/1863685 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TSW. */ +static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TSW)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_W, .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, .accessfn = aa64_cacheop_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to the auxiliary control registers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TACR. */ +static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TACR)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ats1cp_reginfo[] = { static const ARMCPRegInfo actlr2_hactlr2_reginfo[] = { { .name = "ACTLR2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tacr, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "HACTLR2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 3, .access = PL2_RW, .type = ARM_CP_CONST, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo auxcr_reginfo[] = { { .name = "ACTLR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = cpu->reset_auxcr }, + .access = PL1_RW, .accessfn = access_tacr, + .type = ARM_CP_CONST, .resetvalue = cpu->reset_auxcr }, { .name = "ACTLR_EL2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 1, .access = PL2_RW, .type = ARM_CP_CONST, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to cache maintenance insns that operate to the point of coherency or persistence. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 39 +++++++++++++++++++++++++++++++-------- 1 file changed, 31 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_access(CPUARMState *env, return CP_ACCESS_OK; } +static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* Cache invalidate/clean to Point of Coherency or Persistence... */ + switch (arm_current_el(env)) { + case 0: + /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { + return CP_ACCESS_TRAP; + } + /* fall through */ + case 1: + /* ... EL1 must trap to EL2 if HCR_EL2.TPCP is set. */ + if (arm_hcr_el2_eff(env) & HCR_TPCP) { + return CP_ACCESS_TRAP_EL2; + } + break; + } + return CP_ACCESS_OK; +} + /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_access }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = aa64_cacheop_poc_access, + .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, /* MMU Domain access control / MPU write buffer control */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpop_reg[] = { { .name = "DC_CVAP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, - .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpodp_reg[] = { { .name = "DC_CVADP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, - .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, REGINFO_SENTINEL }; #endif /*CONFIG_USER_ONLY*/ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to cache maintenance insns that operate to the point of unification. There are no longer any references to plain aa64_cacheop_access, so remove it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 53 +++++++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo uao_reginfo = { .readfn = aa64_uao_read, .writefn = aa64_uao_write }; -static CPAccessResult aa64_cacheop_access(CPUARMState *env, - const ARMCPRegInfo *ri, - bool isread) -{ - /* Cache invalidate/clean: NOP, but EL0 must UNDEF unless - * SCTLR_EL1.UCI is set. - */ - if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UCI)) { - return CP_ACCESS_TRAP; - } - return CP_ACCESS_OK; -} - static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, return CP_ACCESS_OK; } +static CPAccessResult aa64_cacheop_pou_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* Cache invalidate/clean to Point of Unification... */ + switch (arm_current_el(env)) { + case 0: + /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { + return CP_ACCESS_TRAP; + } + /* fall through */ + case 1: + /* ... EL1 must trap to EL2 if HCR_EL2.TPU is set. */ + if (arm_hcr_el2_eff(env) & HCR_TPU) { + return CP_ACCESS_TRAP_EL2; + } + break; + } + return CP_ACCESS_OK; +} + /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { /* Cache ops: all NOPs since we don't emulate caches */ { .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .type = ARM_CP_NOP, + .accessfn = aa64_cacheop_pou_access }, { .name = "IC_IALLU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .type = ARM_CP_NOP, + .accessfn = aa64_cacheop_pou_access }, { .name = "IC_IVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_pou_access }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .access = PL1_W, .accessfn = aa64_cacheop_poc_access, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_pou_access }, { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .writefn = tlbiipas2_is_write }, /* 32 bit cache operations */ { .name = "ICIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "BPIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "ICIALLU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "ICIMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "BPIALL", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to tlb maintenance insns. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 85 +++++++++++++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 30 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TTLB. */ +static CPAccessResult access_ttlb(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TTLB)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .type = ARM_CP_NO_RAW, .access = PL1_R, .readfn = isr_read }, /* 32 bit ITLB invalidates */ { .name = "ITLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "ITLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "ITLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, /* 32 bit DTLB invalidates */ { .name = "DTLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "DTLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "DTLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, /* 32 bit TLB invalidates */ { .name = "TLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "TLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "TLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, { .name = "TLBIMVAA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimvaa_write }, REGINFO_SENTINEL }; static const ARMCPRegInfo v7mp_cp_reginfo[] = { /* 32 bit TLB invalidates, Inner Shareable */ { .name = "TLBIALLIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_is_write }, { .name = "TLBIMVAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_is_write }, { .name = "TLBIASIDIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbiasid_is_write }, { .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { #endif /* TLB invalidate last level of translation table walk */ { .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_is_write }, { .name = "TLBIMVAALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, { .name = "TLBIMVAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "TLBIMVAAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimvaa_write }, { .name = "TLBIMVALH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, .type = ARM_CP_NO_RAW, .access = PL2_W, .writefn = tlbimva_hyp_write }, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Make the output just a bit prettier when running by hand. Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pauth-1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/tcg/aarch64/pauth-1.c b/tests/tcg/aarch64/pauth-1.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/pauth-1.c +++ b/tests/tcg/aarch64/pauth-1.c @@ -XXX,XX +XXX,XX @@ int main() } perc = (float) count / (float) (TESTS * 2); - printf("Ptr Check: %0.2f%%", perc * 100.0); + printf("Ptr Check: %0.2f%%\n", perc * 100.0); assert(perc > 0.95); return 0; } -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard is a singleboard computer with an Allwinner A10 System-on-Chip [1]. As documented in the Allwinner A10 User Manual V1.5 [2], the SoC has an ARM Cortex-A8 processor. Currently the Cubieboard machine definition specifies the ARM Cortex-A9 in its description and as the default CPU. This patch corrects the Cubieboard machine definition to use the ARM Cortex-A8. The only user-visible effect is that our textual description of the machine was wrong, because hw/arm/allwinner-a10.c always creates a Cortex-A8 CPU regardless of the default value in the MachineClass struct. [1] http://docs.cubieboard.org/products/start#cubieboard1 [2] https://linux-sunxi.org/File:Allwinner_A10_User_manual_V1.5.pdf Fixes: 8a863c8120994981a099 Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-2-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [note in commit message that the bug didn't have much visible effect] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) static void cubieboard_machine_init(MachineClass *mc) { - mc->desc = "cubietech cubieboard (Cortex-A9)"; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); + mc->desc = "cubietech cubieboard (Cortex-A8)"; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); mc->init = cubieboard_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard has an ARM Cortex-A8. Instead of simply ignoring a bogus -cpu option provided by the user, give them an error message so they know their command line is wrong. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-3-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info cubieboard_binfo = { static void cubieboard_init(MachineState *machine) { - AwA10State *a10 = AW_A10(object_new(TYPE_AW_A10)); + AwA10State *a10; Error *err = NULL; + /* Only allow Cortex-A8 for this board */ + if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a8")) != 0) { + error_report("This board can only be used with cortex-a8 CPU"); + exit(1); + } + + a10 = AW_A10(object_new(TYPE_AW_A10)); + object_property_set_int(OBJECT(&a10->emac), 1, "phy-addr", &err); if (err != NULL) { error_reportf_err(err, "Couldn't set phy address: "); -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard contains either 512MiB or 1GiB of onboard RAM [1]. Prevent changing RAM to a different size which could break user programs. [1] http://linux-sunxi.org/Cubieboard Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-4-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) AwA10State *a10; Error *err = NULL; + /* This board has fixed size RAM (512MiB or 1GiB) */ + if (machine->ram_size != 512 * MiB && + machine->ram_size != 1 * GiB) { + error_report("This machine can only be used with 512MiB or 1GiB RAM"); + exit(1); + } + /* Only allow Cortex-A8 for this board */ if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a8")) != 0) { error_report("This board can only be used with cortex-a8 CPU"); @@ -XXX,XX +XXX,XX @@ static void cubieboard_machine_init(MachineClass *mc) { mc->desc = "cubietech cubieboard (Cortex-A8)"; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); + mc->default_ram_size = 1 * GiB; mc->init = cubieboard_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard machine does not support the -bios argument. Report an error when -bios is used and exit immediately. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-5-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "qapi/error.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/sysbus.h" #include "hw/boards.h" #include "hw/arm/allwinner-a10.h" @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) AwA10State *a10; Error *err = NULL; + /* BIOS is not supported by this board */ + if (bios_name) { + error_report("BIOS not supported for this machine"); + exit(1); + } + /* This board has fixed size RAM (512MiB or 1GiB) */ if (machine->ram_size != 512 * MiB && machine->ram_size != 1 * GiB) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Replicate the single TBI bit from TCR_EL2 and TCR_EL3 so that we can unconditionally use pointer bit 55 to index into our composite TBI1:TBI0 field. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx) } else if (mmu_idx == ARMMMUIdx_Stage2) { return 0; /* VTCR_EL2 */ } else { - return extract32(tcr, 20, 1); + /* Replicate the single TBI bit so we always have 2 bits. */ + return extract32(tcr, 20, 1) * 3; } } @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx) } else if (mmu_idx == ARMMMUIdx_Stage2) { return 0; /* VTCR_EL2 */ } else { - return extract32(tcr, 29, 1); + /* Replicate the single TBID bit so we always have 2 bits. */ + return extract32(tcr, 29, 1) * 3; } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We now cache the core mmu_idx in env->hflags. Rather than recompute from scratch, extract the field. All of the uses of cpu_mmu_index within target/arm are within helpers, and env->hflags is always stable within a translation block from whence helpers are called. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 23 +++++++++++++---------- target/arm/helper.c | 5 ----- 2 files changed, 13 insertions(+), 15 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { #define MMU_USER_IDX 0 -/** - * cpu_mmu_index: - * @env: The cpu environment - * @ifetch: True for code access, false for data access. - * - * Return the core mmu index for the current translation regime. - * This function is used by generic TCG code paths. - */ -int cpu_mmu_index(CPUARMState *env, bool ifetch); - /* Indexes used when registering address spaces with cpu_address_space_init */ typedef enum ARMASIdx { ARMASIdx_NS = 0, @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */ FIELD(TBFLAG_A64, TBID, 12, 2) FIELD(TBFLAG_A64, UNPRIV, 14, 1) +/** + * cpu_mmu_index: + * @env: The cpu environment + * @ifetch: True for code access, false for data access. + * + * Return the core mmu index for the current translation regime. + * This function is used by generic TCG code paths. + */ +static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) +{ + return FIELD_EX32(env->hflags, TBFLAG_ANY, MMUIDX); +} + static inline bool bswap_code(bool sctlr_b) { #ifdef CONFIG_USER_ONLY diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_mmu_idx(CPUARMState *env) return arm_mmu_idx_el(env, arm_current_el(env)); } -int cpu_mmu_index(CPUARMState *env, bool ifetch) -{ - return arm_to_core_mmu_idx(arm_mmu_idx(env)); -} - #ifndef CONFIG_USER_ONLY ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> If by context we know that we're in AArch64 mode, we need not test for M-profile when reconstructing the full ARMMMUIdx. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/translate-a64.c | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) } } +static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) +{ + /* AArch64 is always a-profile. */ + return mmu_idx | ARM_MMU_IDX_A; +} + int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->condexec_mask = 0; dc->condexec_cond = 0; core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX); - dc->mmu_idx = core_to_arm_mmu_idx(env, core_mmu_idx); + dc->mmu_idx = core_to_aa64_mmu_idx(core_mmu_idx); dc->tbii = FIELD_EX32(tb_flags, TBFLAG_A64, TBII); dc->tbid = FIELD_EX32(tb_flags, TBFLAG_A64, TBID); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We missed this case within AArch64.ExceptionReturn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) "AArch32 EL%d PC 0x%" PRIx32 "\n", cur_el, new_el, env->regs[15]); } else { + int tbii; + env->aarch64 = 1; spsr &= aarch64_pstate_valid_mask(&env_archcpu(env)->isar); pstate_write(env, spsr); @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) env->pstate &= ~PSTATE_SS; } aarch64_restore_sp(env, new_el); - env->pc = new_pc; helper_rebuild_hflags_a64(env, new_el); + + /* + * Apply TBI to the exception return address. We had to delay this + * until after we selected the new EL, so that we could select the + * correct TBI+TBID bits. This is made easier by waiting until after + * the hflags rebuild, since we can pull the composite TBII field + * from there. + */ + tbii = FIELD_EX32(env->hflags, TBFLAG_A64, TBII); + if ((tbii >> extract64(new_pc, 55, 1)) & 1) { + /* TBI is enabled. */ + int core_mmu_idx = cpu_mmu_index(env, false); + if (regime_has_2_ranges(core_to_aa64_mmu_idx(core_mmu_idx))) { + new_pc = sextract64(new_pc, 0, 56); + } else { + new_pc = extract64(new_pc, 0, 56); + } + } + env->pc = new_pc; + qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch64 EL%d PC 0x%" PRIx64 "\n", cur_el, new_el, env->pc); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is an aarch64-only function. Move it out of the shared file. This patch is code movement only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 1 + target/arm/helper.h | 1 - target/arm/helper-a64.c | 91 ++++++++++++++++++++++++++++++++++++++++ target/arm/op_helper.c | 93 ----------------------------------------- 4 files changed, 92 insertions(+), 94 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) DEF_HELPER_2(exception_return, void, env, i64) +DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) -DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "cpu.h" #include "exec/gdbstub.h" #include "exec/helper-proto.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sqrt_f16)(uint32_t a, void *fpstp) return float16_sqrt(a, s); } +void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) +{ + /* + * Implement DC ZVA, which zeroes a fixed-length block of memory. + * Note that we do not implement the (architecturally mandated) + * alignment fault for attempts to use this on Device memory + * (which matches the usual QEMU behaviour of not implementing either + * alignment faults or any memory attribute handling). + */ + ARMCPU *cpu = env_archcpu(env); + uint64_t blocklen = 4 << cpu->dcz_blocksize; + uint64_t vaddr = vaddr_in & ~(blocklen - 1); + +#ifndef CONFIG_USER_ONLY + { + /* + * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than + * the block size so we might have to do more than one TLB lookup. + * We know that in fact for any v8 CPU the page size is at least 4K + * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only + * 1K as an artefact of legacy v5 subpage support being present in the + * same QEMU executable. So in practice the hostaddr[] array has + * two entries, given the current setting of TARGET_PAGE_BITS_MIN. + */ + int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); + void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; + int try, i; + unsigned mmu_idx = cpu_mmu_index(env, false); + TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); + + assert(maxidx <= ARRAY_SIZE(hostaddr)); + + for (try = 0; try < 2; try++) { + + for (i = 0; i < maxidx; i++) { + hostaddr[i] = tlb_vaddr_to_host(env, + vaddr + TARGET_PAGE_SIZE * i, + 1, mmu_idx); + if (!hostaddr[i]) { + break; + } + } + if (i == maxidx) { + /* + * If it's all in the TLB it's fair game for just writing to; + * we know we don't need to update dirty status, etc. + */ + for (i = 0; i < maxidx - 1; i++) { + memset(hostaddr[i], 0, TARGET_PAGE_SIZE); + } + memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); + return; + } + /* + * OK, try a store and see if we can populate the tlb. This + * might cause an exception if the memory isn't writable, + * in which case we will longjmp out of here. We must for + * this purpose use the actual register value passed to us + * so that we get the fault address right. + */ + helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); + /* Now we can populate the other TLB entries, if any */ + for (i = 0; i < maxidx; i++) { + uint64_t va = vaddr + TARGET_PAGE_SIZE * i; + if (va != (vaddr_in & TARGET_PAGE_MASK)) { + helper_ret_stb_mmu(env, va, 0, oi, GETPC()); + } + } + } + + /* + * Slow path (probably attempt to do this to an I/O device or + * similar, or clearing of a block of code we have translations + * cached for). Just do a series of byte writes as the architecture + * demands. It's not worth trying to use a cpu_physical_memory_map(), + * memset(), unmap() sequence here because: + * + we'd need to account for the blocksize being larger than a page + * + the direct-RAM access case is almost always going to be dealt + * with in the fastpath code above, so there's no speed benefit + * + we would have to deal with the map returning NULL because the + * bounce buffer was in use + */ + for (i = 0; i < blocklen; i++) { + helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); + } + } +#else + memset(g2h(vaddr), 0, blocklen); +#endif +} diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ * License along with this library; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" -#include "qemu/units.h" #include "qemu/log.h" #include "qemu/main-loop.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(ror_cc)(CPUARMState *env, uint32_t x, uint32_t i) return ((uint32_t)x >> shift) | (x << (32 - shift)); } } - -void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) -{ - /* - * Implement DC ZVA, which zeroes a fixed-length block of memory. - * Note that we do not implement the (architecturally mandated) - * alignment fault for attempts to use this on Device memory - * (which matches the usual QEMU behaviour of not implementing either - * alignment faults or any memory attribute handling). - */ - - ARMCPU *cpu = env_archcpu(env); - uint64_t blocklen = 4 << cpu->dcz_blocksize; - uint64_t vaddr = vaddr_in & ~(blocklen - 1); - -#ifndef CONFIG_USER_ONLY - { - /* - * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than - * the block size so we might have to do more than one TLB lookup. - * We know that in fact for any v8 CPU the page size is at least 4K - * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only - * 1K as an artefact of legacy v5 subpage support being present in the - * same QEMU executable. So in practice the hostaddr[] array has - * two entries, given the current setting of TARGET_PAGE_BITS_MIN. - */ - int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); - void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; - int try, i; - unsigned mmu_idx = cpu_mmu_index(env, false); - TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); - - assert(maxidx <= ARRAY_SIZE(hostaddr)); - - for (try = 0; try < 2; try++) { - - for (i = 0; i < maxidx; i++) { - hostaddr[i] = tlb_vaddr_to_host(env, - vaddr + TARGET_PAGE_SIZE * i, - 1, mmu_idx); - if (!hostaddr[i]) { - break; - } - } - if (i == maxidx) { - /* - * If it's all in the TLB it's fair game for just writing to; - * we know we don't need to update dirty status, etc. - */ - for (i = 0; i < maxidx - 1; i++) { - memset(hostaddr[i], 0, TARGET_PAGE_SIZE); - } - memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); - return; - } - /* - * OK, try a store and see if we can populate the tlb. This - * might cause an exception if the memory isn't writable, - * in which case we will longjmp out of here. We must for - * this purpose use the actual register value passed to us - * so that we get the fault address right. - */ - helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); - /* Now we can populate the other TLB entries, if any */ - for (i = 0; i < maxidx; i++) { - uint64_t va = vaddr + TARGET_PAGE_SIZE * i; - if (va != (vaddr_in & TARGET_PAGE_MASK)) { - helper_ret_stb_mmu(env, va, 0, oi, GETPC()); - } - } - } - - /* - * Slow path (probably attempt to do this to an I/O device or - * similar, or clearing of a block of code we have translations - * cached for). Just do a series of byte writes as the architecture - * demands. It's not worth trying to use a cpu_physical_memory_map(), - * memset(), unmap() sequence here because: - * + we'd need to account for the blocksize being larger than a page - * + the direct-RAM access case is almost always going to be dealt - * with in the fastpath code above, so there's no speed benefit - * + we would have to deal with the map returning NULL because the - * bounce buffer was in use - */ - for (i = 0; i < blocklen; i++) { - helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); - } - } -#else - memset(g2h(vaddr), 0, blocklen); -#endif -} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The function does not write registers, and only reads them by implication via the exception path. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) DEF_HELPER_2(exception_return, void, env, i64) -DEF_HELPER_2(dc_zva, void, env, i64) +DEF_HELPER_FLAGS_2(dc_zva, TCG_CALL_NO_WG, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This data access was forgotten when we added support for cleaning addresses of TBI information. Fixes: 3a471103ac1823ba Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200302175829.2183-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, return; case ARM_CP_DC_ZVA: /* Writes clear the aligned block of memory which rt points into. */ - tcg_rt = cpu_reg(s, rt); + tcg_rt = clean_data_tbi(s, cpu_reg(s, rt)); gen_helper_dc_zva(cpu_env, tcg_rt); return; default: -- 2.20.1 target-arm queue: the big stuff here is the final part of rth's patches for Cortex-A76 and Neoverse-N1 support; also present are Gavin's NUMA series and a few other things. thanks -- PMM The following changes since commit 554623226f800acf48a2ed568900c1c968ec9a8b: Merge tag 'qemu-sparc-20220508' of https://github.com/mcayland/qemu into staging (2022-05-08 17:03:26 -0500) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220509 for you to fetch changes up to ae9141d4a3265553503bf07d3574b40f84615a34: hw/acpi/aml-build: Use existing CPU topology to build PPTT table (2022-05-09 11:47:55 +0100) ---------------------------------------------------------------- target-arm queue: * MAINTAINERS/.mailmap: update email for Leif Lindholm * hw/arm: add version information to sbsa-ref machine DT * Enable new features for -cpu max: FEAT_Debugv8p2, FEAT_Debugv8p4, FEAT_RAS (minimal version only), FEAT_IESB, FEAT_CSV2, FEAT_CSV2_2, FEAT_CSV3, FEAT_DGH * Emulate Cortex-A76 * Emulate Neoverse-N1 * Fix the virt board default NUMA topology ---------------------------------------------------------------- Gavin Shan (6): qapi/machine.json: Add cluster-id qtest/numa-test: Specify CPU topology in aarch64_numa_cpu() hw/arm/virt: Consider SMP configuration in CPU topology qtest/numa-test: Correct CPU and NUMA association in aarch64_numa_cpu() hw/arm/virt: Fix CPU's default NUMA node ID hw/acpi/aml-build: Use existing CPU topology to build PPTT table Leif Lindholm (2): MAINTAINERS/.mailmap: update email for Leif Lindholm hw/arm: add versioning to sbsa-ref machine DT Richard Henderson (24): target/arm: Handle cpreg registration for missing EL target/arm: Drop EL3 no EL2 fallbacks target/arm: Merge zcr reginfo target/arm: Adjust definition of CONTEXTIDR_EL2 target/arm: Move cortex impdef sysregs to cpu_tcg.c target/arm: Update qemu-system-arm -cpu max to cortex-a57 target/arm: Set ID_DFR0.PerfMon for qemu-system-arm -cpu max target/arm: Split out aa32_max_features target/arm: Annotate arm_max_initfn with FEAT identifiers target/arm: Use field names for manipulating EL2 and EL3 modes target/arm: Enable FEAT_Debugv8p2 for -cpu max target/arm: Enable FEAT_Debugv8p4 for -cpu max target/arm: Add minimal RAS registers target/arm: Enable SCR and HCR bits for RAS target/arm: Implement virtual SError exceptions target/arm: Implement ESB instruction target/arm: Enable FEAT_RAS for -cpu max target/arm: Enable FEAT_IESB for -cpu max target/arm: Enable FEAT_CSV2 for -cpu max target/arm: Enable FEAT_CSV2_2 for -cpu max target/arm: Enable FEAT_CSV3 for -cpu max target/arm: Enable FEAT_DGH for -cpu max target/arm: Define cortex-a76 target/arm: Define neoverse-n1 docs/system/arm/emulation.rst | 10 + docs/system/arm/virt.rst | 2 + qapi/machine.json | 6 +- target/arm/cpregs.h | 11 + target/arm/cpu.h | 23 ++ target/arm/helper.h | 1 + target/arm/internals.h | 16 ++ target/arm/syndrome.h | 5 + target/arm/a32.decode | 16 +- target/arm/t32.decode | 18 +- hw/acpi/aml-build.c | 111 ++++---- hw/arm/sbsa-ref.c | 16 ++ hw/arm/virt.c | 21 +- hw/core/machine-hmp-cmds.c | 4 + hw/core/machine.c | 16 ++ target/arm/cpu.c | 66 ++++- target/arm/cpu64.c | 353 ++++++++++++++----------- target/arm/cpu_tcg.c | 227 +++++++++++----- target/arm/helper.c | 600 +++++++++++++++++++++++++----------------- target/arm/op_helper.c | 43 +++ target/arm/translate-a64.c | 18 ++ target/arm/translate.c | 23 ++ tests/qtest/numa-test.c | 19 +- .mailmap | 3 +- MAINTAINERS | 2 +- 25 files changed, 1068 insertions(+), 562 deletions(-) From: Leif Lindholm <quic_llindhol@quicinc.com> NUVIA was acquired by Qualcomm in March 2021, but kept functioning on separate infrastructure for a transitional period. We've now switched over to contributing as Qualcomm Innovation Center (quicinc), so update my email address to reflect this. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20220505113740.75565-1-quic_llindhol@quicinc.com Cc: Leif Lindholm <leif@nuviainc.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [Fixed commit message typo] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- .mailmap | 3 ++- MAINTAINERS | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com> Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> -Leif Lindholm <leif@nuviainc.com> <leif.lindholm@linaro.org> +Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> +Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> Radoslaw Biernacki <rad@semihalf.com> <radoslaw.biernacki@linaro.org> Paul Burton <paulburton@kernel.org> <paul.burton@mips.com> Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com> diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <leif@nuviainc.com> +R: Leif Lindholm <quic_llindhol@quicinc.com> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/sbsa-ref.c -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> More gracefully handle cpregs when EL2 and/or EL3 are missing. If the reg is entirely inaccessible, do not register it at all. If the reg is for EL2, and EL3 is present but EL2 is not, either discard, squash to res0, const, or keep unchanged. Per rule RJFFP, mark the 4 aarch32 hypervisor access registers with ARM_CP_EL3_NO_EL2_KEEP, and mark all of the EL2 address translation and tlb invalidation "regs" ARM_CP_EL3_NO_EL2_UNDEF. Mark the 2 virtualization processor id regs ARM_CP_EL3_NO_EL2_C_NZ. This will simplify cpreg registration for conditional arm features. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 11 +++ target/arm/helper.c | 178 ++++++++++++++++++++++++++++++-------------- 2 files changed, 133 insertions(+), 56 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SVE = 1 << 14, /* Flag: Do not expose in gdb sysreg xml. */ ARM_CP_NO_GDB = 1 << 15, + /* + * Flags: If EL3 but not EL2... + * - UNDEF: discard the cpreg, + * - KEEP: retain the cpreg as is, + * - C_NZ: set const on the cpreg, but retain resetvalue, + * - else: set const on the cpreg, zero resetvalue, aka RES0. + * See rule RJFFP in section D1.1.3 of DDI0487H.a. + */ + ARM_CP_EL3_NO_EL2_UNDEF = 1 << 16, + ARM_CP_EL3_NO_EL2_KEEP = 1 << 17, + ARM_CP_EL3_NO_EL2_C_NZ = 1 << 18, }; /* diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write }, { .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_ALIAS | ARM_CP_FPU, + .access = PL2_RW, + .type = ARM_CP_ALIAS | ARM_CP_FPU | ARM_CP_EL3_NO_EL2_KEEP, .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]) }, { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0, - .access = PL2_RW, .resetvalue = 0, + .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, .writefn = dacr_write, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) }, { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1, - .access = PL2_RW, .resetvalue = 0, + .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) }, { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64, .type = ARM_CP_ALIAS, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .writefn = tlbimva_hyp_is_write }, { .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2_write }, { .name = "TLBI_VAE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2_write }, { .name = "TLBI_VALE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2_write }, { .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2is_write }, { .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, #ifndef CONFIG_USER_ONLY /* Unlike the other EL2-related AT operations, these must @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { { .name = "AT_S1E2R", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0, .access = PL2_W, .accessfn = at_s1e2_access, - .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, + .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, + .writefn = ats_write64 }, { .name = "AT_S1E2W", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1, .access = PL2_W, .accessfn = at_s1e2_access, - .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, + .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, + .writefn = ats_write64 }, /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { { .name = "DBGVCR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 2, .opc1 = 4, .crn = 0, .crm = 7, .opc2 = 0, .access = PL2_RW, .accessfn = access_tda, - .type = ARM_CP_NOP }, + .type = ARM_CP_NOP | ARM_CP_EL3_NO_EL2_KEEP }, /* Dummy MDCCINT_EL1, since we don't implement the Debug Communications * Channel but Linux may try to access this register. The 32-bit * alias is DBGDCCINT. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .access = PL2_W, .type = ARM_CP_NOP }, { .name = "TLBI_RVAE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVALE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RIPAS2E1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .access = PL2_W, .type = ARM_CP_NOP }, { .name = "TLBI_RVAE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVALE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVAE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2_write }, { .name = "TLBI_RVALE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2_write }, { .name = "TLBI_RVAE3IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ALLE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 0, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2is_write }, { .name = "TLBI_VAE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_ALLE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 4, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .writefn = tlbi_aa64_alle1is_write }, { .name = "TLBI_VALE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_VMALLS12E1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 6, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "VPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = cpu->midr, .type = ARM_CP_ALIAS, + .resetvalue = cpu->midr, + .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) }, { .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .resetvalue = cpu->midr, + .type = ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, { .name = "VMPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = vmpidr_def, .type = ARM_CP_ALIAS, + .resetvalue = vmpidr_def, + .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) }, { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, - .access = PL2_RW, - .resetvalue = vmpidr_def, + .access = PL2_RW, .resetvalue = vmpidr_def, + .type = ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) }, }; define_arm_cp_regs(cpu, vpidr_regs); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, int crm, int opc1, int opc2, const char *name) { + CPUARMState *env = &cpu->env; uint32_t key; ARMCPRegInfo *r2; bool is64 = r->type & ARM_CP_64BIT; bool ns = secstate & ARM_CP_SECSTATE_NS; int cp = r->cp; - bool isbanked; size_t name_len; + bool make_const; switch (state) { case ARM_CP_STATE_AA32: @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, } } + /* + * Eliminate registers that are not present because the EL is missing. + * Doing this here makes it easier to put all registers for a given + * feature into the same ARMCPRegInfo array and define them all at once. + */ + make_const = false; + if (arm_feature(env, ARM_FEATURE_EL3)) { + /* + * An EL2 register without EL2 but with EL3 is (usually) RES0. + * See rule RJFFP in section D1.1.3 of DDI0487H.a. + */ + int min_el = ctz32(r->access) / 2; + if (min_el == 2 && !arm_feature(env, ARM_FEATURE_EL2)) { + if (r->type & ARM_CP_EL3_NO_EL2_UNDEF) { + return; + } + make_const = !(r->type & ARM_CP_EL3_NO_EL2_KEEP); + } + } else { + CPAccessRights max_el = (arm_feature(env, ARM_FEATURE_EL2) + ? PL2_RW : PL1_RW); + if ((r->access & max_el) == 0) { + return; + } + } + /* Combine cpreg and name into one allocation. */ name_len = strlen(name) + 1; r2 = g_malloc(sizeof(*r2) + name_len); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, r2->opaque = opaque; } - isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; - if (isbanked) { + if (make_const) { + /* This should not have been a very special register to begin. */ + int old_special = r2->type & ARM_CP_SPECIAL_MASK; + assert(old_special == 0 || old_special == ARM_CP_NOP); /* - * Register is banked (using both entries in array). - * Overwriting fieldoffset as the array is only used to define - * banked registers but later only fieldoffset is used. + * Set the special function to CONST, retaining the other flags. + * This is important for e.g. ARM_CP_SVE so that we still + * take the SVE trap if CPTR_EL3.EZ == 0. */ - r2->fieldoffset = r->bank_fieldoffsets[ns]; - } + r2->type = (r2->type & ~ARM_CP_SPECIAL_MASK) | ARM_CP_CONST; + /* + * Usually, these registers become RES0, but there are a few + * special cases like VPIDR_EL2 which have a constant non-zero + * value with writes ignored. + */ + if (!(r->type & ARM_CP_EL3_NO_EL2_C_NZ)) { + r2->resetvalue = 0; + } + /* + * ARM_CP_CONST has precedence, so removing the callbacks and + * offsets are not strictly necessary, but it is potentially + * less confusing to debug later. + */ + r2->readfn = NULL; + r2->writefn = NULL; + r2->raw_readfn = NULL; + r2->raw_writefn = NULL; + r2->resetfn = NULL; + r2->fieldoffset = 0; + r2->bank_fieldoffsets[0] = 0; + r2->bank_fieldoffsets[1] = 0; + } else { + bool isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; - if (state == ARM_CP_STATE_AA32) { if (isbanked) { /* - * If the register is banked then we don't need to migrate or - * reset the 32-bit instance in certain cases: - * - * 1) If the register has both 32-bit and 64-bit instances then we - * can count on the 64-bit instance taking care of the - * non-secure bank. - * 2) If ARMv8 is enabled then we can count on a 64-bit version - * taking care of the secure bank. This requires that separate - * 32 and 64-bit definitions are provided. + * Register is banked (using both entries in array). + * Overwriting fieldoffset as the array is only used to define + * banked registers but later only fieldoffset is used. */ - if ((r->state == ARM_CP_STATE_BOTH && ns) || - (arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) { + r2->fieldoffset = r->bank_fieldoffsets[ns]; + } + if (state == ARM_CP_STATE_AA32) { + if (isbanked) { + /* + * If the register is banked then we don't need to migrate or + * reset the 32-bit instance in certain cases: + * + * 1) If the register has both 32-bit and 64-bit instances + * then we can count on the 64-bit instance taking care + * of the non-secure bank. + * 2) If ARMv8 is enabled then we can count on a 64-bit + * version taking care of the secure bank. This requires + * that separate 32 and 64-bit definitions are provided. + */ + if ((r->state == ARM_CP_STATE_BOTH && ns) || + (arm_feature(env, ARM_FEATURE_V8) && !ns)) { + r2->type |= ARM_CP_ALIAS; + } + } else if ((secstate != r->secure) && !ns) { + /* + * The register is not banked so we only want to allow + * migration of the non-secure instance. + */ r2->type |= ARM_CP_ALIAS; } - } else if ((secstate != r->secure) && !ns) { - /* - * The register is not banked so we only want to allow migration - * of the non-secure instance. - */ - r2->type |= ARM_CP_ALIAS; - } - if (HOST_BIG_ENDIAN && - r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { - r2->fieldoffset += sizeof(uint32_t); + if (HOST_BIG_ENDIAN && + r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { + r2->fieldoffset += sizeof(uint32_t); + } } } @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, * multiple times. Special registers (ie NOP/WFI) are * never migratable and not even raw-accessible. */ - if (r->type & ARM_CP_SPECIAL_MASK) { + if (r2->type & ARM_CP_SPECIAL_MASK) { r2->type |= ARM_CP_NO_RAW; } if (((r->crm == CP_ANY) && crm != 0) || -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Drop el3_no_el2_cp_reginfo, el3_no_el2_v8_cp_reginfo, and the local vpidr_regs definition, and rely on the squashing to ARM_CP_CONST while registering for v8. This is a behavior change for v7 cpus with Security Extensions and without Virtualization Extensions, in that the virtualization cpregs are now correctly not present. This would be a migration compatibility break, except that we have an existing bug in which migration of 32-bit cpus with Security Extensions enabled does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 158 ++++---------------------------------------- 1 file changed, 13 insertions(+), 145 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) }, }; -/* Used to describe the behaviour of EL2 regs when EL2 does not exist. */ -static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = { - { .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0, - .access = PL2_RW, - .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore }, - { .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "HMAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "HAMAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "VTCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "VTTBR", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 6, .crm = 2, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1, - .access = PL2_RW, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HPFAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HIFAR", .state = ARM_CP_STATE_AA32, - .type = ARM_CP_CONST, - .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2, - .access = PL2_RW, .resetvalue = 0 }, -}; - -/* Ditto, but for registers which exist in ARMv8 but not v7 */ -static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { - { .name = "HCR2", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, -}; - static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, v8_idregs); define_arm_cp_regs(cpu, v8_cp_reginfo); } - if (arm_feature(env, ARM_FEATURE_EL2)) { + + /* + * Register the base EL2 cpregs. + * Pre v8, these registers are implemented only as part of the + * Virtualization Extensions (EL2 present). Beginning with v8, + * if EL2 is missing but EL3 is enabled, mostly these become + * RES0 from EL3, with some specific exceptions. + */ + if (arm_feature(env, ARM_FEATURE_EL2) + || (arm_feature(env, ARM_FEATURE_EL3) + && arm_feature(env, ARM_FEATURE_V8))) { uint64_t vmpidr_def = mpidr_read_val(env); ARMCPRegInfo vpidr_regs[] = { { .name = "VPIDR", .state = ARM_CP_STATE_AA32, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) }; define_one_arm_cp_reg(cpu, &rvbar); } - } else { - /* If EL2 is missing but higher ELs are enabled, we need to - * register the no_el2 reginfos. - */ - if (arm_feature(env, ARM_FEATURE_EL3)) { - /* When EL3 exists but not EL2, VPIDR and VMPIDR take the value - * of MIDR_EL1 and MPIDR_EL1. - */ - ARMCPRegInfo vpidr_regs[] = { - { .name = "VPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = cpu->midr, - .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, - { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_NO_RAW, - .writefn = arm_cp_write_ignore, .readfn = mpidr_read }, - }; - define_arm_cp_regs(cpu, vpidr_regs); - define_arm_cp_regs(cpu, el3_no_el2_cp_reginfo); - if (arm_feature(env, ARM_FEATURE_V8)) { - define_arm_cp_regs(cpu, el3_no_el2_v8_cp_reginfo); - } - } } + + /* Register the base EL3 cpregs. */ if (arm_feature(env, ARM_FEATURE_EL3)) { define_arm_cp_regs(cpu, el3_cp_reginfo); ARMCPRegInfo el3_regs[] = { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Drop zcr_no_el2_reginfo and merge the 3 registers into one array, now that ZCR_EL2 can be squashed to RES0 and ZCR_EL3 dropped while registering. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 55 ++++++++++++++------------------------------- 1 file changed, 17 insertions(+), 38 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, } } -static const ARMCPRegInfo zcr_el1_reginfo = { - .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), - .writefn = zcr_write, .raw_writefn = raw_write -}; - -static const ARMCPRegInfo zcr_el2_reginfo = { - .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), - .writefn = zcr_write, .raw_writefn = raw_write -}; - -static const ARMCPRegInfo zcr_no_el2_reginfo = { - .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE, - .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore -}; - -static const ARMCPRegInfo zcr_el3_reginfo = { - .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL3_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), - .writefn = zcr_write, .raw_writefn = raw_write +static const ARMCPRegInfo zcr_reginfo[] = { + { .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), + .writefn = zcr_write, .raw_writefn = raw_write }, + { .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), + .writefn = zcr_write, .raw_writefn = raw_write }, + { .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL3_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), + .writefn = zcr_write, .raw_writefn = raw_write }, }; void hw_watchpoint_update(ARMCPU *cpu, int n) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (cpu_isar_feature(aa64_sve, cpu)) { - define_one_arm_cp_reg(cpu, &zcr_el1_reginfo); - if (arm_feature(env, ARM_FEATURE_EL2)) { - define_one_arm_cp_reg(cpu, &zcr_el2_reginfo); - } else { - define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo); - } - if (arm_feature(env, ARM_FEATURE_EL3)) { - define_one_arm_cp_reg(cpu, &zcr_el3_reginfo); - } + define_arm_cp_regs(cpu, zcr_reginfo); } #ifdef TARGET_AARCH64 -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This register is present for either VHE or Debugv8p2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo jazelle_regs[] = { .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, }; +static const ARMCPRegInfo contextidr_el2 = { + .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, + .access = PL2_RW, + .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) +}; + static const ARMCPRegInfo vhe_reginfo[] = { - { .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL2_RW, - .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) }, { .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1, .access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_one_arm_cp_reg(cpu, &ssbs_reginfo); } + if (cpu_isar_feature(aa64_vh, cpu) || + cpu_isar_feature(aa64_debugv8p2, cpu)) { + define_one_arm_cp_reg(cpu, &contextidr_el2); + } if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) { define_arm_cp_regs(cpu, vhe_reginfo); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we were defining some of these in user-only mode, but none of them are accessible from user-only, therefore define them only in system mode. This will shortly be used from cpu_tcg.c also. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++ target/arm/cpu64.c | 64 +++--------------------------------------- target/arm/cpu_tcg.c | 59 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+), 60 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int aarch64_fpu_gdb_get_reg(CPUARMState *env, GByteArray *buf, int reg); int aarch64_fpu_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg); #endif +#ifdef CONFIG_USER_ONLY +static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } +#else +void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); +#endif + #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "hvf_arm.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" -#include "cpregs.h" +#include "internals.h" -#ifndef CONFIG_USER_ONLY -static uint64_t a57_a53_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) -{ - ARMCPU *cpu = env_archcpu(env); - - /* Number of cores is in [25:24]; otherwise we RAZ */ - return (cpu->core_count - 1) << 24; -} -#endif - -static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { -#ifndef CONFIG_USER_ONLY - { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2, - .access = PL1_RW, .readfn = a57_a53_l2ctlr_read, - .writefn = arm_cp_write_ignore }, - { .name = "L2CTLR", - .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2, - .access = PL1_RW, .readfn = a57_a53_l2ctlr_read, - .writefn = arm_cp_write_ignore }, -#endif - { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2ECTLR", - .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUACTLR", - .cp = 15, .opc1 = 0, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUECTLR", - .cp = 15, .opc1 = 1, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUMERRSR", - .cp = 15, .opc1 = 2, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2MERRSR", - .cp = 15, .opc1 = 3, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, -}; - static void aarch64_a57_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } static void aarch64_a53_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } static void aarch64_a72_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #endif #include "cpregs.h" +#ifndef CONFIG_USER_ONLY +static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = env_archcpu(env); + + /* Number of cores is in [25:24]; otherwise we RAZ */ + return (cpu->core_count - 1) << 24; +} + +static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { + { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2, + .access = PL1_RW, .readfn = l2ctlr_read, + .writefn = arm_cp_write_ignore }, + { .name = "L2CTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2, + .access = PL1_RW, .readfn = l2ctlr_read, + .writefn = arm_cp_write_ignore }, + { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2ECTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUACTLR", + .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUECTLR", + .cp = 15, .opc1 = 1, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUMERRSR", + .cp = 15, .opc1 = 2, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2MERRSR", + .cp = 15, .opc1 = 3, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, +}; + +void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) +{ + define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); +} +#endif /* !CONFIG_USER_ONLY */ + /* CPU models. These are not needed for the AArch64 linux-user build. */ #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Instead of starting with cortex-a15 and adding v8 features to a v7 cpu, begin with a v8 cpu stripped of its aarch64 features. This fixes the long-standing to-do where we only enabled v8 features for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 151 ++++++++++++++++++++++++++----------------- 1 file changed, 92 insertions(+), 59 deletions(-) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) static void arm_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); + uint32_t t; - cortex_a15_initfn(obj); + /* aarch64_a57_initfn, advertising none of the aarch64 features */ + cpu->dtb_compatible = "arm,cortex-a57"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + cpu->midr = 0x411fd070; + cpu->revidr = 0x00000000; + cpu->reset_fpsid = 0x41034070; + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x12111111; + cpu->isar.mvfr2 = 0x00000043; + cpu->ctr = 0x8444c004; + cpu->reset_sctlr = 0x00c50838; + cpu->isar.id_pfr0 = 0x00000131; + cpu->isar.id_pfr1 = 0x00011011; + cpu->isar.id_dfr0 = 0x03010066; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x10101105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02102211; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00011142; + cpu->isar.id_isar5 = 0x00011121; + cpu->isar.id_isar6 = 0; + cpu->isar.dbgdidr = 0x3516d000; + cpu->clidr = 0x0a200023; + cpu->ccsidr[0] = 0x701fe00a; /* 32KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe012; /* 48KB L1 icache */ + cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */ + define_cortex_a72_a57_a53_cp_reginfo(cpu); - /* old-style VFP short-vector support */ - cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); + /* Add additional features supported by QEMU */ + t = cpu->isar.id_isar5; + t = FIELD_DP32(t, ID_ISAR5, AES, 2); + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + cpu->isar.id_isar5 = t; + + t = cpu->isar.id_isar6; + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); + t = FIELD_DP32(t, ID_ISAR6, DP, 1); + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); + t = FIELD_DP32(t, ID_ISAR6, SB, 1); + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + cpu->isar.id_isar6 = t; + + t = cpu->isar.mvfr1; + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + cpu->isar.mvfr1 = t; + + t = cpu->isar.mvfr2; + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + cpu->isar.mvfr2 = t; + + t = cpu->isar.id_mmfr3; + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + cpu->isar.id_mmfr3 = t; + + t = cpu->isar.id_mmfr4; + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + cpu->isar.id_mmfr4 = t; + + t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, DIT, 1); + cpu->isar.id_pfr0 = t; + + t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + cpu->isar.id_pfr2 = t; #ifdef CONFIG_USER_ONLY /* - * We don't set these in system emulation mode for the moment, - * since we don't correctly set (all of) the ID registers to - * advertise them. + * Break with true ARMv8 and add back old-style VFP short-vector support. + * Only do this for user-mode, where -cpu max is the default, so that + * older v6 and v7 programs are more likely to work without adjustment. */ - set_feature(&cpu->env, ARM_FEATURE_V8); - { - uint32_t t; - - t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); - t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = t; - - t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = t; - - t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = t; - - t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ - cpu->isar.mvfr2 = t; - - t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = t; - - t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = t; - - t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = t; - - t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = t; - } -#endif /* CONFIG_USER_ONLY */ + cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); +#endif } #endif /* !TARGET_AARCH64 */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We set this for qemu-system-aarch64, but failed to do so for the strictly 32-bit emulation. Fixes: 3bec78447a9 ("target/arm: Provide ARMv8.4-PMU in '-cpu max'") Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = FIELD_DP32(t, ID_PFR2, SSBS, 1); cpu->isar.id_pfr2 = t; + t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + cpu->isar.id_dfr0 = t; + #ifdef CONFIG_USER_ONLY /* * Break with true ARMv8 and add back old-style VFP short-vector support. -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Share the code to set AArch32 max features so that we no longer have code drift between qemu{-system,}-{arm,aarch64}. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 + target/arm/cpu64.c | 50 +----------------- target/arm/cpu_tcg.c | 114 ++++++++++++++++++++++------------------- 3 files changed, 65 insertions(+), 101 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +void aa32_max_features(ARMCPU *cpu); + #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); uint64_t t; - uint32_t u; if (kvm_enabled() || hvf_enabled()) { /* With KVM or HVF, '-cpu max' is identical to '-cpu host' */ @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); cpu->isar.id_aa64zfr0 = t; - /* Replicate the same data to the 32-bit id registers. */ - u = cpu->isar.id_isar5; - u = FIELD_DP32(u, ID_ISAR5, AES, 2); /* AES + PMULL */ - u = FIELD_DP32(u, ID_ISAR5, SHA1, 1); - u = FIELD_DP32(u, ID_ISAR5, SHA2, 1); - u = FIELD_DP32(u, ID_ISAR5, CRC32, 1); - u = FIELD_DP32(u, ID_ISAR5, RDM, 1); - u = FIELD_DP32(u, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = u; - - u = cpu->isar.id_isar6; - u = FIELD_DP32(u, ID_ISAR6, JSCVT, 1); - u = FIELD_DP32(u, ID_ISAR6, DP, 1); - u = FIELD_DP32(u, ID_ISAR6, FHM, 1); - u = FIELD_DP32(u, ID_ISAR6, SB, 1); - u = FIELD_DP32(u, ID_ISAR6, SPECRES, 1); - u = FIELD_DP32(u, ID_ISAR6, BF16, 1); - u = FIELD_DP32(u, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = u; - - u = cpu->isar.id_pfr0; - u = FIELD_DP32(u, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = u; - - u = cpu->isar.id_pfr2; - u = FIELD_DP32(u, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = u; - - u = cpu->isar.id_mmfr3; - u = FIELD_DP32(u, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = u; - - u = cpu->isar.id_mmfr4; - u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ - u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - u = FIELD_DP32(u, ID_MMFR4, CNP, 1); /* TTCNP */ - u = FIELD_DP32(u, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = u; - t = cpu->isar.id_aa64dfr0; t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */ cpu->isar.id_aa64dfr0 = t; - u = cpu->isar.id_dfr0; - u = FIELD_DP32(u, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ - cpu->isar.id_dfr0 = u; - - u = cpu->isar.mvfr1; - u = FIELD_DP32(u, MVFR1, FPHP, 3); /* v8.2-FP16 */ - u = FIELD_DP32(u, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = u; + /* Replicate the same data to the 32-bit id registers. */ + aa32_max_features(cpu); #ifdef CONFIG_USER_ONLY /* diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #endif #include "cpregs.h" + +/* Share AArch32 -cpu max features with AArch64. */ +void aa32_max_features(ARMCPU *cpu) +{ + uint32_t t; + + /* Add additional features supported by QEMU */ + t = cpu->isar.id_isar5; + t = FIELD_DP32(t, ID_ISAR5, AES, 2); + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + cpu->isar.id_isar5 = t; + + t = cpu->isar.id_isar6; + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); + t = FIELD_DP32(t, ID_ISAR6, DP, 1); + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); + t = FIELD_DP32(t, ID_ISAR6, SB, 1); + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + cpu->isar.id_isar6 = t; + + t = cpu->isar.mvfr1; + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + cpu->isar.mvfr1 = t; + + t = cpu->isar.mvfr2; + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + cpu->isar.mvfr2 = t; + + t = cpu->isar.id_mmfr3; + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + cpu->isar.id_mmfr3 = t; + + t = cpu->isar.id_mmfr4; + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + cpu->isar.id_mmfr4 = t; + + t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, DIT, 1); + cpu->isar.id_pfr0 = t; + + t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + cpu->isar.id_pfr2 = t; + + t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + cpu->isar.id_dfr0 = t; +} + #ifndef CONFIG_USER_ONLY static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) { @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) static void arm_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - uint32_t t; /* aarch64_a57_initfn, advertising none of the aarch64 features */ cpu->dtb_compatible = "arm,cortex-a57"; @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */ define_cortex_a72_a57_a53_cp_reginfo(cpu); - /* Add additional features supported by QEMU */ - t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); - t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = t; - - t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = t; - - t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = t; - - t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ - cpu->isar.mvfr2 = t; - - t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = t; - - t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = t; - - t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = t; - - t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = t; - - t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ - cpu->isar.id_dfr0 = t; + aa32_max_features(cpu); #ifdef CONFIG_USER_ONLY /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Update the legacy feature names to the current names. Provide feature names for id changes that were not marked. Sort the field updates into increasing bitfield order. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 100 +++++++++++++++++++++---------------------- target/arm/cpu_tcg.c | 48 ++++++++++----------- 2 files changed, 74 insertions(+), 74 deletions(-) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->midr = t; t = cpu->isar.id_aa64isar0; - t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* AES + PMULL */ - t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* SHA512 */ + t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); - t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* v8.5-CondM */ - t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */ - t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ + t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1); /* FEAT_SM3 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1); /* FEAT_SM4 */ + t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1); /* FEAT_DotProd */ + t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1); /* FEAT_FHM */ + t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* FEAT_FlagM2 */ + t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */ + t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1); /* FEAT_RNG */ cpu->isar.id_aa64isar0 = t; t = cpu->isar.id_aa64isar1; - t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); - t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* ARMv8.4-RCPC */ - t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); + t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); /* FEAT_DPB2 */ + t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); /* FEAT_JSCVT */ + t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); /* FEAT_FCMA */ + t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* FEAT_LRCPC2 */ + t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); /* FEAT_FRINTTS */ + t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); /* FEAT_SB */ + t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); /* FEAT_SPECRES */ + t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); /* FEAT_I8MM */ cpu->isar.id_aa64isar1 = t; t = cpu->isar.id_aa64pfr0; + t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); /* FEAT_FP16 */ + t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); /* FEAT_FP16 */ t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); - t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); - t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); - t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); - t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); + t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ + t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; - t = FIELD_DP64(t, ID_AA64PFR1, BT, 1); - t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2); + t = FIELD_DP64(t, ID_AA64PFR1, BT, 1); /* FEAT_BTI */ + t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2); /* FEAT_SSBS2 */ /* * Begin with full support for MTE. This will be downgraded to MTE=0 * during realize if the board provides no tag memory, much like * we do for EL2 with the virtualization=on property. */ - t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); + t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64mmfr0 = t; t = cpu->isar.id_aa64mmfr1; - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* HPD */ - t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); - t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); - t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* ATS1E1 */ - t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* VMID16 */ - t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* TTS2UXN */ + t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ + t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ + t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* FEAT_PAN2 */ + t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ cpu->isar.id_aa64mmfr1 = t; t = cpu->isar.id_aa64mmfr2; - t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); - t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ - t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* TTST */ - t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ - t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ - t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */ + t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* FEAT_TTCNP */ + t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); /* FEAT_UAO */ + t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ + t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* FEAT_TTST */ + t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ + t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */ cpu->isar.id_aa64mmfr2 = t; t = cpu->isar.id_aa64zfr0; t = FIELD_DP64(t, ID_AA64ZFR0, SVEVER, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* PMULL */ - t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); + t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* FEAT_SVE_PMULL128 */ + t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); /* FEAT_SVE_BitPerm */ + t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); /* FEAT_SVE_SHA3 */ + t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); /* FEAT_SVE_SM4 */ + t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); /* FEAT_I8MM */ + t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1); /* FEAT_F32MM */ + t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); /* FEAT_F64MM */ cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; - t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */ + t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; /* Replicate the same data to the 32-bit id registers. */ diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) /* Add additional features supported by QEMU */ t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, AES, 2); /* FEAT_PMULL */ + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); /* FEAT_SHA1 */ + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); /* FEAT_SHA256 */ t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); /* FEAT_RDM */ + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); /* FEAT_FCMA */ cpu->isar.id_isar5 = t; t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); /* FEAT_JSCVT */ + t = FIELD_DP32(t, ID_ISAR6, DP, 1); /* Feat_DotProd */ + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); /* FEAT_FHM */ + t = FIELD_DP32(t, ID_ISAR6, SB, 1); /* FEAT_SB */ + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); /* FEAT_SPECRES */ + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); /* FEAT_AA32BF16 */ + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); /* FEAT_AA32I8MM */ cpu->isar.id_isar6 = t; t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* FEAT_FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* FEAT_FP16 */ cpu->isar.mvfr1 = t; t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ cpu->isar.mvfr2 = t; t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* FEAT_PAN2 */ cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX*/ cpu->isar.id_mmfr4 = t; t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); + t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); /* FEAT_SSBS */ cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Use FIELD_DP{32,64} to manipulate id_pfr1 and id_aa64pfr0 during arm_cpu_realizefn. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) */ unset_feature(env, ARM_FEATURE_EL3); - /* Disable the security extension feature bits in the processor feature - * registers as well. These are id_pfr1[7:4] and id_aa64pfr0[15:12]. + /* + * Disable the security extension feature bits in the processor + * feature registers as well. */ - cpu->isar.id_pfr1 &= ~0xf0; - cpu->isar.id_aa64pfr0 &= ~0xf000; + cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0); + cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, + ID_AA64PFR0, EL3, 0); } if (!cpu->has_el2) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!arm_feature(env, ARM_FEATURE_EL2)) { - /* Disable the hypervisor feature bits in the processor feature - * registers if we don't have EL2. These are id_pfr1[15:12] and - * id_aa64pfr0_el1[11:8]. + /* + * Disable the hypervisor feature bits in the processor feature + * registers if we don't have EL2. */ - cpu->isar.id_aa64pfr0 &= ~0xf00; - cpu->isar.id_pfr1 &= ~0xf000; + cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, + ID_AA64PFR0, EL2, 0); + cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, + ID_PFR1, VIRTUALIZATION, 0); } #ifndef CONFIG_USER_ONLY -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The only portion of FEAT_Debugv8p2 that is relevant to QEMU is CONTEXTIDR_EL2, which is also conditionally implemented with FEAT_VHE. The rest of the debug extension concerns the External debug interface, which is outside the scope of QEMU. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BTI (Branch Target Identification) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) +- FEAT_Debugv8p2 (Debug changes for v8.2) - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_FCMA (Floating-point complex number instructions) - FEAT_FHM (Floating-point half-precision multiplication instructions) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) * feature registers as well. */ cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0); + cpu->isar.id_dfr0 = FIELD_DP32(cpu->isar.id_dfr0, ID_DFR0, COPSDBG, 0); cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, ID_AA64PFR0, EL3, 0); } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; + t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 8); /* FEAT_Debugv8p2 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, COPDBG, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP32(t, ID_DFR0, COPSDBG, 8); /* FEAT_Debugv8p2 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns changes to the External Debug interface, with Secure and Non-secure access to the debug registers, and all of it is outside the scope of QEMU. Indicating support for this is mandatory with FEAT_SEL2, which we do implement. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 2 +- target/arm/cpu_tcg.c | 4 ++-- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) +- FEAT_Debugv8p4 (Debug changes for v8.4) - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_FCMA (Floating-point complex number instructions) - FEAT_FHM (Floating-point half-precision multiplication instructions) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; - t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, COPDBG, 8); /* FEAT_Debugv8p2 */ - t = FIELD_DP32(t, ID_DFR0, COPSDBG, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP32(t, ID_DFR0, COPDBG, 9); /* FEAT_Debugv8p4 */ + t = FIELD_DP32(t, ID_DFR0, COPSDBG, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add only the system registers required to implement zero error records. This means that all values for ERRSELR are out of range, which means that it and all of the indexed error record registers need not be implemented. Add the EL2 registers required for injecting virtual SError. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 +++ target/arm/helper.c | 84 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 89 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0. */ uint64_t gcr_el1; uint64_t rgsr_el1; + + /* Minimal RAS registers */ + uint64_t disr_el1; + uint64_t vdisr_el2; + uint64_t vsesr_el2; } cp15; struct { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 }, }; +/* + * Check for traps to RAS registers, which are controlled + * by HCR_EL2.TERR and SCR_EL3.TERR. + */ +static CPAccessResult access_terr(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TERR)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_TERR)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static uint64_t disr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { + return env->cp15.vdisr_el2; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { + return 0; /* RAZ/WI */ + } + return env->cp15.disr_el1; +} + +static void disr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { + env->cp15.vdisr_el2 = val; + return; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { + return; /* RAZ/WI */ + } + env->cp15.disr_el1 = val; +} + +/* + * Minimal RAS implementation with no Error Records. + * Which means that all of the Error Record registers: + * ERXADDR_EL1 + * ERXCTLR_EL1 + * ERXFR_EL1 + * ERXMISC0_EL1 + * ERXMISC1_EL1 + * ERXMISC2_EL1 + * ERXMISC3_EL1 + * ERXPFGCDN_EL1 (RASv1p1) + * ERXPFGCTL_EL1 (RASv1p1) + * ERXPFGF_EL1 (RASv1p1) + * ERXSTATUS_EL1 + * and + * ERRSELR_EL1 + * may generate UNDEFINED, which is the effect we get by not + * listing them at all. + */ +static const ARMCPRegInfo minimal_ras_reginfo[] = { + { .name = "DISR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 1, + .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.disr_el1), + .readfn = disr_read, .writefn = disr_write, .raw_writefn = raw_write }, + { .name = "ERRIDR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 3, .opc2 = 0, + .access = PL1_R, .accessfn = access_terr, + .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1, + .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vdisr_el2) }, + { .name = "VSESR_EL2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 3, + .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vsesr_el2) }, +}; + /* Return the exception level to which exceptions should be taken * via SVEAccessTrap. If an exception should be routed through * AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_ssbs, cpu)) { define_one_arm_cp_reg(cpu, &ssbs_reginfo); } + if (cpu_isar_feature(any_ras, cpu)) { + define_arm_cp_regs(cpu, minimal_ras_reginfo); + } if (cpu_isar_feature(aa64_vh, cpu) || cpu_isar_feature(aa64_debugv8p2, cpu)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable writes to the TERR and TEA bits when RAS is enabled. These bits are otherwise RES0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) } valid_mask &= ~SCR_NET; + if (cpu_isar_feature(aa64_ras, cpu)) { + valid_mask |= SCR_TERR; + } if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= SCR_TLOR; } @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) } } else { valid_mask &= ~(SCR_RW | SCR_ST); + if (cpu_isar_feature(aa32_ras, cpu)) { + valid_mask |= SCR_TERR; + } } if (!arm_feature(env, ARM_FEATURE_EL2)) { @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (cpu_isar_feature(aa64_vh, cpu)) { valid_mask |= HCR_E2H; } + if (cpu_isar_feature(aa64_ras, cpu)) { + valid_mask |= HCR_TERR | HCR_TEA; + } if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= HCR_TLOR; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Virtual SError exceptions are raised by setting HCR_EL2.VSE, and are routed to EL1 just like other virtual exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 8 ++++++++ target/arm/syndrome.h | 5 +++++ target/arm/cpu.c | 38 +++++++++++++++++++++++++++++++++++++- target/arm/helper.c | 40 +++++++++++++++++++++++++++++++++++++++- 5 files changed, 91 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_LSERR 21 /* v8M LSERR SecureFault */ #define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ #define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */ +#define EXCP_VSERR 24 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ enum { #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 +#define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0 /* The usual mapping for an AArch64 system register to its AArch32 * counterpart is for the 32 bit world to have access to the lower diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_cpu_update_vserr: Update CPU_INTERRUPT_VSERR bit + * + * Update the CPU_INTERRUPT_VSERR bit in cs->interrupt_request, + * following a change to the HCR_EL2.VSE bit. + */ +void arm_cpu_update_vserr(ARMCPU *cpu); + /** * arm_mmu_idx_el: * @env: The cpu environment diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_serror(uint32_t extra) +{ + return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) return (cpu->power_state != PSCI_OFF) && cs->interrupt_request & (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD - | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ + | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ | CPU_INTERRUPT_VSERR | CPU_INTERRUPT_EXITTB); } @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, return false; } return !(env->daif & PSTATE_I); + case EXCP_VSERR: + if (!(hcr_el2 & HCR_AMO) || (hcr_el2 & HCR_TGE)) { + /* VIRQs are only taken when hypervized. */ + return false; + } + return !(env->daif & PSTATE_A); default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) goto found; } } + if (interrupt_request & CPU_INTERRUPT_VSERR) { + excp_idx = EXCP_VSERR; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + /* Taking a virtual abort clears HCR_EL2.VSE */ + env->cp15.hcr_el2 &= ~HCR_VSE; + cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR); + goto found; + } + } return false; found: @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) } } +void arm_cpu_update_vserr(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VSERR, which is the HCR_EL2.VSE bit. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = env->cp15.hcr_el2 & HCR_VSE; + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VSERR) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VSERR); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR); + } + } +} + #ifndef CONFIG_USER_ONLY static void arm_cpu_set_irq(void *opaque, int irq, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) } } - /* External aborts are not possible in QEMU so A bit is always clear */ + if (hcr_el2 & HCR_AMO) { + if (cs->interrupt_request & CPU_INTERRUPT_VSERR) { + ret |= CPSR_A; + } + } + return ret; } @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) g_assert(qemu_mutex_iothread_locked()); arm_cpu_update_virq(cpu); arm_cpu_update_vfiq(cpu); + arm_cpu_update_vserr(cpu); } static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs) [EXCP_LSERR] = "v8M LSERR UsageFault", [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", + [EXCP_VSERR] = "Virtual SERR", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) mask = CPSR_A | CPSR_I | CPSR_F; offset = 4; break; + case EXCP_VSERR: + { + /* + * Note that this is reported as a data abort, but the DFAR + * has an UNKNOWN value. Construct the SError syndrome from + * AET and ExT fields. + */ + ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal, }; + + if (extended_addresses_enabled(env)) { + env->exception.fsr = arm_fi_to_lfsc(&fi); + } else { + env->exception.fsr = arm_fi_to_sfsc(&fi); + } + env->exception.fsr |= env->cp15.vsesr_el2 & 0xd000; + A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr); + qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x\n", + env->exception.fsr); + + new_mode = ARM_CPU_MODE_ABT; + addr = 0x10; + mask = CPSR_A | CPSR_I; + offset = 8; + } + break; case EXCP_SMC: new_mode = ARM_CPU_MODE_MON; addr = 0x08; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) case EXCP_VFIQ: addr += 0x100; break; + case EXCP_VSERR: + addr += 0x180; + /* Construct the SError syndrome from IDS and ISS fields. */ + env->exception.syndrome = syn_serror(env->cp15.vsesr_el2 & 0x1ffffff); + env->cp15.esr_el[new_el] = env->exception.syndrome; + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Check for and defer any pending virtual SError. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/a32.decode | 16 ++++++++------ target/arm/t32.decode | 18 ++++++++-------- target/arm/op_helper.c | 43 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 17 +++++++++++++++ target/arm/translate.c | 23 ++++++++++++++++++++ 6 files changed, 103 insertions(+), 15 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_1(wfe, void, env) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) +DEF_HELPER_1(vesb, void, env) DEF_HELPER_3(cpsr_write, void, env, i32, i32) DEF_HELPER_2(cpsr_write_eret, void, env, i32) diff --git a/target/arm/a32.decode b/target/arm/a32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/a32.decode +++ b/target/arm/a32.decode @@ -XXX,XX +XXX,XX @@ SMULTT .... 0001 0110 .... 0000 .... 1110 .... @rd0mn { { - YIELD ---- 0011 0010 0000 1111 ---- 0000 0001 - WFE ---- 0011 0010 0000 1111 ---- 0000 0010 - WFI ---- 0011 0010 0000 1111 ---- 0000 0011 + [ + YIELD ---- 0011 0010 0000 1111 ---- 0000 0001 + WFE ---- 0011 0010 0000 1111 ---- 0000 0010 + WFI ---- 0011 0010 0000 1111 ---- 0000 0011 - # TODO: Implement SEV, SEVL; may help SMP performance. - # SEV ---- 0011 0010 0000 1111 ---- 0000 0100 - # SEVL ---- 0011 0010 0000 1111 ---- 0000 0101 + # TODO: Implement SEV, SEVL; may help SMP performance. + # SEV ---- 0011 0010 0000 1111 ---- 0000 0100 + # SEVL ---- 0011 0010 0000 1111 ---- 0000 0101 + + ESB ---- 0011 0010 0000 1111 ---- 0001 0000 + ] # The canonical nop ends in 00000000, but the whole of the # rest of the space executes as nop if otherwise unsupported. diff --git a/target/arm/t32.decode b/target/arm/t32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/t32.decode +++ b/target/arm/t32.decode @@ -XXX,XX +XXX,XX @@ CLZ 1111 1010 1011 ---- 1111 .... 1000 .... @rdm [ # Hints, and CPS { - YIELD 1111 0011 1010 1111 1000 0000 0000 0001 - WFE 1111 0011 1010 1111 1000 0000 0000 0010 - WFI 1111 0011 1010 1111 1000 0000 0000 0011 + [ + YIELD 1111 0011 1010 1111 1000 0000 0000 0001 + WFE 1111 0011 1010 1111 1000 0000 0000 0010 + WFI 1111 0011 1010 1111 1000 0000 0000 0011 - # TODO: Implement SEV, SEVL; may help SMP performance. - # SEV 1111 0011 1010 1111 1000 0000 0000 0100 - # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 + # TODO: Implement SEV, SEVL; may help SMP performance. + # SEV 1111 0011 1010 1111 1000 0000 0000 0100 + # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 - # For M-profile minimal-RAS ESB can be a NOP, which is the - # default behaviour since it is in the hint space. - # ESB 1111 0011 1010 1111 1000 0000 0001 0000 + ESB 1111 0011 1010 1111 1000 0000 0001 0000 + ] # The canonical nop ends in 0000 0000, but the whole rest # of the space is "reserved hint, behaves as nop". diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(probe_access)(CPUARMState *env, target_ulong ptr, access_type, mmu_idx, ra); } } + +/* + * This function corresponds to AArch64.vESBOperation(). + * Note that the AArch32 version is not functionally different. + */ +void HELPER(vesb)(CPUARMState *env) +{ + /* + * The EL2Enabled() check is done inside arm_hcr_el2_eff, + * and will return HCR_EL2.VSE == 0, so nothing happens. + */ + uint64_t hcr = arm_hcr_el2_eff(env); + bool enabled = !(hcr & HCR_TGE) && (hcr & HCR_AMO); + bool pending = enabled && (hcr & HCR_VSE); + bool masked = (env->daif & PSTATE_A); + + /* If VSE pending and masked, defer the exception. */ + if (pending && masked) { + uint32_t syndrome; + + if (arm_el_is_aa64(env, 1)) { + /* Copy across IDS and ISS from VSESR. */ + syndrome = env->cp15.vsesr_el2 & 0x1ffffff; + } else { + ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal }; + + if (extended_addresses_enabled(env)) { + syndrome = arm_fi_to_lfsc(&fi); + } else { + syndrome = arm_fi_to_sfsc(&fi); + } + /* Copy across AET and ExT from VSESR. */ + syndrome |= env->cp15.vsesr_el2 & 0xd000; + } + + /* Set VDISR_EL2.A along with the syndrome. */ + env->cp15.vdisr_el2 = syndrome | (1u << 31); + + /* Clear pending virtual SError */ + env->cp15.hcr_el2 &= ~HCR_VSE; + cpu_reset_interrupt(env_cpu(env), CPU_INTERRUPT_VSERR); + } +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, gen_helper_autib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); } break; + case 0b10000: /* ESB */ + /* Without RAS, we must implement this as NOP. */ + if (dc_isar_feature(aa64_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch64.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. + */ + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); + } + } + break; case 0b11000: /* PACIAZ */ if (s->pauth_active) { gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFI(DisasContext *s, arg_WFI *a) return true; } +static bool trans_ESB(DisasContext *s, arg_ESB *a) +{ + /* + * For M-profile, minimal-RAS ESB can be a NOP. + * Without RAS, we must implement this as NOP. + */ + if (!arm_dc_feature(s, ARM_FEATURE_M) && dc_isar_feature(aa32_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch32.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. + */ + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); + } + } + return true; +} + static bool trans_NOP(DisasContext *s, arg_NOP *a) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_PMULL (PMULL, PMULL2 instructions) - FEAT_PMUv3p1 (PMU Extensions v3.1) - FEAT_PMUv3p4 (PMU Extensions v3.4) +- FEAT_RAS (Reliability, availability, and serviceability) - FEAT_RDM (Advanced SIMD rounding double multiply accumulate instructions) - FEAT_RNG (Random number generator) - FEAT_SB (Speculation Barrier) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64pfr0; t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); /* FEAT_FP16 */ t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); /* FEAT_FP16 */ + t = FIELD_DP64(t, ID_AA64PFR0, RAS, 1); /* FEAT_RAS */ t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) t = cpu->isar.id_pfr0; t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ + t = FIELD_DP32(t, ID_PFR0, RAS, 1); /* FEAT_RAS */ cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This feature is AArch64 only, and applies to physical SErrors, which QEMU does not implement, thus the feature is a nop. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_FlagM2 (Enhancements to flag manipulation instructions) - FEAT_HPDS (Hierarchical permission disables) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) +- FEAT_IESB (Implicit error synchronization event) - FEAT_JSCVT (JavaScript conversion instructions) - FEAT_LOR (Limited ordering regions) - FEAT_LPA (Large Physical Address space) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); /* FEAT_UAO */ + t = FIELD_DP64(t, ID_AA64MMFR2, IESB, 1); /* FEAT_IESB */ t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* FEAT_TTST */ t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns branch speculation, which TCG does not implement. Thus we can trivially enable this feature. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CSV2 (Cache speculation variant 2) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1); /* FEAT_CSV2 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr4 = t; t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, CSV2, 2); /* FEAT_CVS2 */ t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ t = FIELD_DP32(t, ID_PFR0, RAS, 1); /* FEAT_RAS */ cpu->isar.id_pfr0 = t; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> There is no branch prediction in TCG, therefore there is no need to actually include the context number into the predictor. Therefore all we need to do is add the state for SCXTNUM_ELx. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 3 ++ target/arm/cpu.h | 16 +++++++++ target/arm/cpu.c | 5 +++ target/arm/cpu64.c | 3 +- target/arm/helper.c | 61 ++++++++++++++++++++++++++++++++++- 5 files changed, 86 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) - FEAT_CSV2 (Cache speculation variant 2) +- FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) +- FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) +- FEAT_CSV2_2 (Cache speculation variant 2, version 2) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMPACKey apdb; ARMPACKey apga; } keys; + + uint64_t scxtnum_el[4]; #endif #if defined(CONFIG_USER_ONLY) @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define SCTLR_WXN (1U << 19) #define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */ #define SCTLR_UWXN (1U << 20) /* v7 onward, AArch32 only */ +#define SCTLR_TSCXT (1U << 20) /* FEAT_CSV2_1p2, AArch64 only */ #define SCTLR_FI (1U << 21) /* up to v7, v8 RES0 */ #define SCTLR_IESB (1U << 21) /* v8.2-IESB, AArch64 only */ #define SCTLR_U (1U << 22) /* up to v6, RAO in v7 */ @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_dit(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, DIT) != 0; } +static inline bool isar_feature_aa64_scxtnum(const ARMISARegisters *id) +{ + int key = FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, CSV2); + if (key >= 2) { + return true; /* FEAT_CSV2_2 */ + } + if (key == 1) { + key = FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, CSV2_FRAC); + return key >= 2; /* FEAT_CSV2_1p2 */ + } + return false; +} + static inline bool isar_feature_aa64_ssbs(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SSBS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) */ env->cp15.gcr_el1 = 0x1ffff; } + /* + * Disable access to SCXTNUM_EL0 from CSV2_1p2. + * This is not yet exposed from the Linux kernel in any way. + */ + env->cp15.sctlr_el[1] |= SCTLR_TSCXT; #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ - t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1); /* FEAT_CSV2 */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) * we do for EL2 with the virtualization=on property. */ t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ + t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= SCR_ATA; } + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + valid_mask |= SCR_ENSCXT; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= HCR_ATA | HCR_DCT | HCR_TID5; } + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + valid_mask |= HCR_ENSCXT; + } } /* Clear RES0 bits. */ @@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) { K(3, 0, 5, 6, 0), K(3, 4, 5, 6, 0), K(3, 5, 5, 6, 0), "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte }, + { K(3, 0, 13, 0, 7), K(3, 4, 13, 0, 7), K(3, 5, 13, 0, 7), + "SCXTNUM_EL1", "SCXTNUM_EL2", "SCXTNUM_EL12", + isar_feature_aa64_scxtnum }, + /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */ /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */ }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { }, }; -#endif +static CPAccessResult access_scxtnum(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + uint64_t hcr = arm_hcr_el2_eff(env); + int el = arm_current_el(env); + + if (el == 0 && !((hcr & HCR_E2H) && (hcr & HCR_TGE))) { + if (env->cp15.sctlr_el[1] & SCTLR_TSCXT) { + if (hcr & HCR_TGE) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_TRAP; + } + } else if (el < 2 && (env->cp15.sctlr_el[2] & SCTLR_TSCXT)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 2 && arm_is_el2_enabled(env) && !(hcr & HCR_ENSCXT)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 + && arm_feature(env, ARM_FEATURE_EL3) + && !(env->cp15.scr_el3 & SCR_ENSCXT)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo scxtnum_reginfo[] = { + { .name = "SCXTNUM_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL0_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[0]) }, + { .name = "SCXTNUM_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL1_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[1]) }, + { .name = "SCXTNUM_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL2_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[2]) }, + { .name = "SCXTNUM_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL3_RW, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[3]) }, +}; +#endif /* TARGET_AARCH64 */ static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, mte_tco_ro_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } + + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + define_arm_cp_regs(cpu, scxtnum_reginfo); + } #endif if (cpu_isar_feature(any_predinv, cpu)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns cache speculation, which TCG does not implement. Thus we can trivially enable this feature. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) - FEAT_CSV2_2 (Cache speculation variant 2, version 2) +- FEAT_CSV3 (Cache speculation variant 3) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2); /* FEAT_CSV2_2 */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV3, 1); /* FEAT_CSV3 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, CSV3, 1); /* FEAT_CSV3 */ t = FIELD_DP32(t, ID_PFR2, SSBS, 1); /* FEAT_SSBS */ cpu->isar.id_pfr2 = t; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns not merging memory access, which TCG does not implement. Thus we can trivially enable this feature. Add a comment to handle_hint for the DGH instruction, but no code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/translate-a64.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) - FEAT_CSV2_2 (Cache speculation variant 2, version 2) - FEAT_CSV3 (Cache speculation variant 3) +- FEAT_DGH (Data gathering hint) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); /* FEAT_SB */ t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); /* FEAT_SPECRES */ t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ISAR1, DGH, 1); /* FEAT_DGH */ t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); /* FEAT_I8MM */ cpu->isar.id_aa64isar1 = t; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, break; case 0b00100: /* SEV */ case 0b00101: /* SEVL */ + case 0b00110: /* DGH */ /* we treat all as NOP at least for now */ break; case 0b00111: /* XPACLRI */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable the a76 for virt and sbsa board use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 1 + hw/arm/sbsa-ref.c | 1 + hw/arm/virt.c | 1 + target/arm/cpu64.c | 66 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ Supported guest CPU types: - ``cortex-a53`` (64-bit) - ``cortex-a57`` (64-bit) - ``cortex-a72`` (64-bit) +- ``cortex-a76`` (64-bit) - ``a64fx`` (64-bit) - ``host`` (with KVM only) - ``max`` (same as ``host`` for KVM; best possible emulation with TCG) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), + ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a53"), ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), + ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("a64fx"), ARM_CPU_TYPE_NAME("host"), ARM_CPU_TYPE_NAME("max"), diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +static void aarch64_a76_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + cpu->dtb_compatible = "arm,cortex-a76"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_AARCH64); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + + /* Ordered by B2.4 AArch64 registers by functional group */ + cpu->clidr = 0x82000023; + cpu->ctr = 0x8444C004; + cpu->dcz_blocksize = 4; + cpu->isar.id_aa64dfr0 = 0x0000000010305408ull; + cpu->isar.id_aa64isar0 = 0x0000100010211120ull; + cpu->isar.id_aa64isar1 = 0x0000000000100001ull; + cpu->isar.id_aa64mmfr0 = 0x0000000000101122ull; + cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull; + cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull; + cpu->isar.id_aa64pfr0 = 0x1100000010111112ull; /* GIC filled in later */ + cpu->isar.id_aa64pfr1 = 0x0000000000000010ull; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_dfr0 = 0x04010088; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x01011121; + cpu->isar.id_isar6 = 0x00000010; + cpu->isar.id_mmfr0 = 0x10201105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02122211; + cpu->isar.id_mmfr4 = 0x00021110; + cpu->isar.id_pfr0 = 0x10010131; + cpu->isar.id_pfr1 = 0x00010000; /* GIC filled in later */ + cpu->isar.id_pfr2 = 0x00000011; + cpu->midr = 0x414fd0b1; /* r4p1 */ + cpu->revidr = 0; + + /* From B2.18 CCSIDR_EL1 */ + cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */ + cpu->ccsidr[2] = 0x707fe03a; /* 512KB L2 cache */ + + /* From B2.93 SCTLR_EL3 */ + cpu->reset_sctlr = 0x30c50838; + + /* From B4.23 ICH_VTR_EL2 */ + cpu->gic_num_lrs = 4; + cpu->gic_vpribits = 5; + cpu->gic_vprebits = 5; + + /* From B5.1 AdvSIMD AArch64 register summary */ + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x13211111; + cpu->isar.mvfr2 = 0x00000043; +} + void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { /* @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a57", .initfn = aarch64_a57_initfn }, { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, + { .name = "cortex-a76", .initfn = aarch64_a76_initfn }, { .name = "a64fx", .initfn = aarch64_a64fx_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, #if defined(CONFIG_KVM) || defined(CONFIG_HVF) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable the n1 for virt and sbsa board use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 1 + hw/arm/sbsa-ref.c | 1 + hw/arm/virt.c | 1 + target/arm/cpu64.c | 66 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ Supported guest CPU types: - ``cortex-a76`` (64-bit) - ``a64fx`` (64-bit) - ``host`` (with KVM only) +- ``neoverse-n1`` (64-bit) - ``max`` (same as ``host`` for KVM; best possible emulation with TCG) Note that the default is ``cortex-a15``, so for an AArch64 guest you must diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), ARM_CPU_TYPE_NAME("cortex-a76"), + ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a72"), ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("a64fx"), + ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("host"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a76_initfn(Object *obj) cpu->isar.mvfr2 = 0x00000043; } +static void aarch64_neoverse_n1_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + cpu->dtb_compatible = "arm,neoverse-n1"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_AARCH64); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + + /* Ordered by B2.4 AArch64 registers by functional group */ + cpu->clidr = 0x82000023; + cpu->ctr = 0x8444c004; + cpu->dcz_blocksize = 4; + cpu->isar.id_aa64dfr0 = 0x0000000110305408ull; + cpu->isar.id_aa64isar0 = 0x0000100010211120ull; + cpu->isar.id_aa64isar1 = 0x0000000000100001ull; + cpu->isar.id_aa64mmfr0 = 0x0000000000101125ull; + cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull; + cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull; + cpu->isar.id_aa64pfr0 = 0x1100000010111112ull; /* GIC filled in later */ + cpu->isar.id_aa64pfr1 = 0x0000000000000020ull; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_dfr0 = 0x04010088; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x01011121; + cpu->isar.id_isar6 = 0x00000010; + cpu->isar.id_mmfr0 = 0x10201105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02122211; + cpu->isar.id_mmfr4 = 0x00021110; + cpu->isar.id_pfr0 = 0x10010131; + cpu->isar.id_pfr1 = 0x00010000; /* GIC filled in later */ + cpu->isar.id_pfr2 = 0x00000011; + cpu->midr = 0x414fd0c1; /* r4p1 */ + cpu->revidr = 0; + + /* From B2.23 CCSIDR_EL1 */ + cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */ + cpu->ccsidr[2] = 0x70ffe03a; /* 1MB L2 cache */ + + /* From B2.98 SCTLR_EL3 */ + cpu->reset_sctlr = 0x30c50838; + + /* From B4.23 ICH_VTR_EL2 */ + cpu->gic_num_lrs = 4; + cpu->gic_vpribits = 5; + cpu->gic_vprebits = 5; + + /* From B5.1 AdvSIMD AArch64 register summary */ + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x13211111; + cpu->isar.mvfr2 = 0x00000043; +} + void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { /* @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, { .name = "cortex-a76", .initfn = aarch64_a76_initfn }, { .name = "a64fx", .initfn = aarch64_a64fx_initfn }, + { .name = "neoverse-n1", .initfn = aarch64_neoverse_n1_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, #if defined(CONFIG_KVM) || defined(CONFIG_HVF) { .name = "host", .initfn = aarch64_host_initfn }, -- 2.25.1 From: Leif Lindholm <quic_llindhol@quicinc.com> The sbsa-ref machine is continuously evolving. Some of the changes we want to make in the near future, to align with real components (e.g. the GIC-700), will break compatibility for existing firmware. Introduce two new properties to the DT generated on machine generation: - machine-version-major To be incremented when a platform change makes the machine incompatible with existing firmware. - machine-version-minor To be incremented when functionality is added to the machine without causing incompatibility with existing firmware. to be reset to 0 when machine-version-major is incremented. This versioning scheme is *neither*: - A QEMU versioned machine type; a given version of QEMU will emulate a given version of the platform. - A reflection of level of SBSA (now SystemReady SR) support provided. The version will increment on guest-visible functional changes only, akin to a revision ID register found on a physical platform. These properties are both introduced with the value 0. (Hence, a machine where the DT is lacking these nodes is equivalent to version 0.0.) Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20220505113947.75714-1-quic_llindhol@quicinc.com Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Radoslaw Biernacki <rad@semihalf.com> Cc: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SBSAMachineState *sms) qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); + /* + * This versioning scheme is for informing platform fw only. It is neither: + * - A QEMU versioned machine type; a given version of QEMU will emulate + * a given version of the platform. + * - A reflection of level of SBSA (now SystemReady SR) support provided. + * + * machine-version-major: updated when changes breaking fw compatibility + * are introduced. + * machine-version-minor: updated when features are added that don't break + * fw compatibility. + */ + qemu_fdt_setprop_cell(fdt, "/", "machine-version-major", 0); + qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 0); + if (ms->numa_state->have_numa_distance) { int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); uint32_t *matrix = g_malloc0(size); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> This adds cluster-id in CPU instance properties, which will be used by arm/virt machine. Besides, the cluster-id is also verified or dumped in various spots: * hw/core/machine.c::machine_set_cpu_numa_node() to associate CPU with its NUMA node. * hw/core/machine.c::machine_numa_finish_cpu_init() to record CPU slots with no NUMA mapping set. * hw/core/machine-hmp-cmds.c::hmp_hotpluggable_cpus() to dump cluster-id. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-2-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- qapi/machine.json | 6 ++++-- hw/core/machine-hmp-cmds.c | 4 ++++ hw/core/machine.c | 16 ++++++++++++++++ 3 files changed, 24 insertions(+), 2 deletions(-) diff --git a/qapi/machine.json b/qapi/machine.json index XXXXXXX..XXXXXXX 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -XXX,XX +XXX,XX @@ # @node-id: NUMA node ID the CPU belongs to # @socket-id: socket number within node/board the CPU belongs to # @die-id: die number within socket the CPU belongs to (since 4.1) -# @core-id: core number within die the CPU belongs to +# @cluster-id: cluster number within die the CPU belongs to (since 7.1) +# @core-id: core number within cluster the CPU belongs to # @thread-id: thread number within core the CPU belongs to # -# Note: currently there are 5 properties that could be present +# Note: currently there are 6 properties that could be present # but management should be prepared to pass through other # properties with device_add command to allow for future # interface extension. This also requires the filed names to be kept in @@ -XXX,XX +XXX,XX @@ 'data': { '*node-id': 'int', '*socket-id': 'int', '*die-id': 'int', + '*cluster-id': 'int', '*core-id': 'int', '*thread-id': 'int' } diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine-hmp-cmds.c +++ b/hw/core/machine-hmp-cmds.c @@ -XXX,XX +XXX,XX @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict) if (c->has_die_id) { monitor_printf(mon, " die-id: \"%" PRIu64 "\"\n", c->die_id); } + if (c->has_cluster_id) { + monitor_printf(mon, " cluster-id: \"%" PRIu64 "\"\n", + c->cluster_id); + } if (c->has_core_id) { monitor_printf(mon, " core-id: \"%" PRIu64 "\"\n", c->core_id); } diff --git a/hw/core/machine.c b/hw/core/machine.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine.c +++ b/hw/core/machine.c @@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine, return; } + if (props->has_cluster_id && !slot->props.has_cluster_id) { + error_setg(errp, "cluster-id is not supported"); + return; + } + if (props->has_socket_id && !slot->props.has_socket_id) { error_setg(errp, "socket-id is not supported"); return; @@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine, continue; } + if (props->has_cluster_id && + props->cluster_id != slot->props.cluster_id) { + continue; + } + if (props->has_die_id && props->die_id != slot->props.die_id) { continue; } @@ -XXX,XX +XXX,XX @@ static char *cpu_slot_to_string(const CPUArchId *cpu) } g_string_append_printf(s, "die-id: %"PRId64, cpu->props.die_id); } + if (cpu->props.has_cluster_id) { + if (s->len) { + g_string_append_printf(s, ", "); + } + g_string_append_printf(s, "cluster-id: %"PRId64, cpu->props.cluster_id); + } if (cpu->props.has_core_id) { if (s->len) { g_string_append_printf(s, ", "); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> The CPU topology isn't enabled on arm/virt machine yet, but we're going to do it in next patch. After the CPU topology is enabled by next patch, "thread-id=1" becomes invalid because the CPU core is preferred on arm/virt machine. It means these two CPUs have 0/1 as their core IDs, but their thread IDs are all 0. It will trigger test failure as the following message indicates: [14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test ERROR 1.48s killed by signal 6 SIGABRT >>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \ QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \ QTEST_QEMU_BINARY=./qemu-system-aarch64 \ QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83 \ /home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k ―――――――――――――――――――――――――――――――――――――――――――――― stderr: qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found This fixes the issue by providing comprehensive SMP configurations in aarch64_numa_cpu(). The SMP configurations aren't used before the CPU topology is enabled in next patch. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Message-id: 20220503140304.855514-3-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/numa-test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) QTestState *qts; g_autofree char *cli = NULL; - cli = make_cli(data, "-machine smp.cpus=2 " + cli = make_cli(data, "-machine " + "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 " "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " "-numa cpu,node-id=1,thread-id=0 " "-numa cpu,node-id=0,thread-id=1"); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> Currently, the SMP configuration isn't considered when the CPU topology is populated. In this case, it's impossible to provide the default CPU-to-NUMA mapping or association based on the socket ID of the given CPU. This takes account of SMP configuration when the CPU topology is populated. The die ID for the given CPU isn't assigned since it's not supported on arm/virt machine. Besides, the used SMP configuration in qtest/numa-test/aarch64_numa_cpu() is corrcted to avoid testing failure Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-4-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) int n; unsigned int max_cpus = ms->smp.max_cpus; VirtMachineState *vms = VIRT_MACHINE(ms); + MachineClass *mc = MACHINE_GET_CLASS(vms); if (ms->possible_cpus) { assert(ms->possible_cpus->len == max_cpus); @@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) ms->possible_cpus->cpus[n].type = ms->cpu_type; ms->possible_cpus->cpus[n].arch_id = virt_cpu_mp_affinity(vms, n); + + assert(!mc->smp_props.dies_supported); + ms->possible_cpus->cpus[n].props.has_socket_id = true; + ms->possible_cpus->cpus[n].props.socket_id = + n / (ms->smp.clusters * ms->smp.cores * ms->smp.threads); + ms->possible_cpus->cpus[n].props.has_cluster_id = true; + ms->possible_cpus->cpus[n].props.cluster_id = + (n / (ms->smp.cores * ms->smp.threads)) % ms->smp.clusters; + ms->possible_cpus->cpus[n].props.has_core_id = true; + ms->possible_cpus->cpus[n].props.core_id = + (n / ms->smp.threads) % ms->smp.cores; ms->possible_cpus->cpus[n].props.has_thread_id = true; - ms->possible_cpus->cpus[n].props.thread_id = n; + ms->possible_cpus->cpus[n].props.thread_id = + n % ms->smp.threads; } return ms->possible_cpus; } -- 2.25.1 From: Gavin Shan <gshan@redhat.com> In aarch64_numa_cpu(), the CPU and NUMA association is something like below. Two threads in the same core/cluster/socket are associated with two individual NUMA nodes, which is unreal as Igor Mammedov mentioned. We don't expect the association to break NUMA-to-socket boundary, which matches with the real world. NUMA-node socket cluster core thread ------------------------------------------ 0 0 0 0 0 1 0 0 0 1 This corrects the topology for CPUs and their association with NUMA nodes. After this patch is applied, the CPU and NUMA association becomes something like below, which looks real. Besides, socket/cluster/core/thread IDs are all checked when the NUMA node IDs are verified. It helps to check if the CPU topology is properly populated or not. NUMA-node socket cluster core thread ------------------------------------------ 0 1 0 0 0 1 0 0 0 0 Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-5-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/numa-test.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) g_autofree char *cli = NULL; cli = make_cli(data, "-machine " - "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 " + "smp.cpus=2,smp.sockets=2,smp.clusters=1,smp.cores=1,smp.threads=1 " "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " - "-numa cpu,node-id=1,thread-id=0 " - "-numa cpu,node-id=0,thread-id=1"); + "-numa cpu,node-id=0,socket-id=1,cluster-id=0,core-id=0,thread-id=0 " + "-numa cpu,node-id=1,socket-id=0,cluster-id=0,core-id=0,thread-id=0"); qts = qtest_init(cli); cpus = get_cpus(qts, &resp); g_assert(cpus); while ((e = qlist_pop(cpus))) { QDict *cpu, *props; - int64_t thread, node; + int64_t socket, cluster, core, thread, node; cpu = qobject_to(QDict, e); g_assert(qdict_haskey(cpu, "props")); @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) g_assert(qdict_haskey(props, "node-id")); node = qdict_get_int(props, "node-id"); + g_assert(qdict_haskey(props, "socket-id")); + socket = qdict_get_int(props, "socket-id"); + g_assert(qdict_haskey(props, "cluster-id")); + cluster = qdict_get_int(props, "cluster-id"); + g_assert(qdict_haskey(props, "core-id")); + core = qdict_get_int(props, "core-id"); g_assert(qdict_haskey(props, "thread-id")); thread = qdict_get_int(props, "thread-id"); - if (thread == 0) { + if (socket == 0 && cluster == 0 && core == 0 && thread == 0) { g_assert_cmpint(node, ==, 1); - } else if (thread == 1) { + } else if (socket == 1 && cluster == 0 && core == 0 && thread == 0) { g_assert_cmpint(node, ==, 0); } else { g_assert(false); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> When CPU-to-NUMA association isn't explicitly provided by users, the default one is given by mc->get_default_cpu_node_id(). However, the CPU topology isn't fully considered in the default association and this causes CPU topology broken warnings on booting Linux guest. For example, the following warning messages are observed when the Linux guest is booted with the following command lines. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host \ -cpu host \ -smp 6,sockets=2,cores=3,threads=1 \ -m 1024M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=128M \ -object memory-backend-ram,id=mem1,size=128M \ -object memory-backend-ram,id=mem2,size=128M \ -object memory-backend-ram,id=mem3,size=128M \ -object memory-backend-ram,id=mem4,size=128M \ -object memory-backend-ram,id=mem4,size=384M \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -numa node,nodeid=2,memdev=mem2 \ -numa node,nodeid=3,memdev=mem3 \ -numa node,nodeid=4,memdev=mem4 \ -numa node,nodeid=5,memdev=mem5 : alternatives: patching kernel code BUG: arch topology borken the CLS domain not a subset of the MC domain <the above error log repeats> BUG: arch topology borken the DIE domain not a subset of the NODE domain With current implementation of mc->get_default_cpu_node_id(), CPU#0 to CPU#5 are associated with NODE#0 to NODE#5 separately. That's incorrect because CPU#0/1/2 should be associated with same NUMA node because they're seated in same socket. This fixes the issue by considering the socket ID when the default CPU-to-NUMA association is provided in virt_possible_cpu_arch_ids(). With this applied, no more CPU topology broken warnings are seen from the Linux guest. The 6 CPUs are associated with NODE#0/1, but there are no CPUs associated with NODE#2/3/4/5. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Message-id: 20220503140304.855514-6-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ virt_cpu_index_to_props(MachineState *ms, unsigned cpu_index) static int64_t virt_get_default_cpu_node_id(const MachineState *ms, int idx) { - return idx % ms->numa_state->num_nodes; + int64_t socket_id = ms->possible_cpus->cpus[idx].props.socket_id; + + return socket_id % ms->numa_state->num_nodes; } static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) -- 2.25.1 From: Gavin Shan <gshan@redhat.com> When the PPTT table is built, the CPU topology is re-calculated, but it's unecessary because the CPU topology has been populated in virt_possible_cpu_arch_ids() on arm/virt machine. This reworks build_pptt() to avoid by reusing the existing IDs in ms->possible_cpus. Currently, the only user of build_pptt() is arm/virt machine. Signed-off-by: Gavin Shan <gshan@redhat.com> Tested-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20220503140304.855514-7-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/acpi/aml-build.c | 111 +++++++++++++++++++------------------------- 1 file changed, 48 insertions(+), 63 deletions(-) diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/aml-build.c +++ b/hw/acpi/aml-build.c @@ -XXX,XX +XXX,XX @@ void build_pptt(GArray *table_data, BIOSLinker *linker, MachineState *ms, const char *oem_id, const char *oem_table_id) { MachineClass *mc = MACHINE_GET_CLASS(ms); - GQueue *list = g_queue_new(); - guint pptt_start = table_data->len; - guint parent_offset; - guint length, i; - int uid = 0; - int socket; + CPUArchIdList *cpus = ms->possible_cpus; + int64_t socket_id = -1, cluster_id = -1, core_id = -1; + uint32_t socket_offset = 0, cluster_offset = 0, core_offset = 0; + uint32_t pptt_start = table_data->len; + int n; AcpiTable table = { .sig = "PPTT", .rev = 2, .oem_id = oem_id, .oem_table_id = oem_table_id }; acpi_table_begin(&table, table_data); - for (socket = 0; socket < ms->smp.sockets; socket++) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - /* - * Physical package - represents the boundary - * of a physical package - */ - (1 << 0), - 0, socket, NULL, 0); - } - - if (mc->smp_props.clusters_supported) { - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int cluster; - - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (cluster = 0; cluster < ms->smp.clusters; cluster++) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - (0 << 0), /* not a physical package */ - parent_offset, cluster, NULL, 0); - } + /* + * This works with the assumption that cpus[n].props.*_id has been + * sorted from top to down levels in mc->possible_cpu_arch_ids(). + * Otherwise, the unexpected and duplicated containers will be + * created. + */ + for (n = 0; n < cpus->len; n++) { + if (cpus->cpus[n].props.socket_id != socket_id) { + assert(cpus->cpus[n].props.socket_id > socket_id); + socket_id = cpus->cpus[n].props.socket_id; + cluster_id = -1; + core_id = -1; + socket_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (1 << 0), /* Physical package */ + 0, socket_id, NULL, 0); } - } - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int core; - - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (core = 0; core < ms->smp.cores; core++) { - if (ms->smp.threads > 1) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - (0 << 0), /* not a physical package */ - parent_offset, core, NULL, 0); - } else { - build_processor_hierarchy_node( - table_data, - (1 << 1) | /* ACPI Processor ID valid */ - (1 << 3), /* Node is a Leaf */ - parent_offset, uid++, NULL, 0); + if (mc->smp_props.clusters_supported) { + if (cpus->cpus[n].props.cluster_id != cluster_id) { + assert(cpus->cpus[n].props.cluster_id > cluster_id); + cluster_id = cpus->cpus[n].props.cluster_id; + core_id = -1; + cluster_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (0 << 0), /* Not a physical package */ + socket_offset, cluster_id, NULL, 0); } + } else { + cluster_offset = socket_offset; } - } - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int thread; + if (ms->smp.threads == 1) { + build_processor_hierarchy_node(table_data, + (1 << 1) | /* ACPI Processor ID valid */ + (1 << 3), /* Node is a Leaf */ + cluster_offset, n, NULL, 0); + } else { + if (cpus->cpus[n].props.core_id != core_id) { + assert(cpus->cpus[n].props.core_id > core_id); + core_id = cpus->cpus[n].props.core_id; + core_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (0 << 0), /* Not a physical package */ + cluster_offset, core_id, NULL, 0); + } - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (thread = 0; thread < ms->smp.threads; thread++) { - build_processor_hierarchy_node( - table_data, + build_processor_hierarchy_node(table_data, (1 << 1) | /* ACPI Processor ID valid */ (1 << 2) | /* Processor is a Thread */ (1 << 3), /* Node is a Leaf */ - parent_offset, uid++, NULL, 0); + core_offset, n, NULL, 0); } } - g_queue_free(list); acpi_table_end(linker, &table); } -- 2.25.1