Nothing much exciting here, but it's 37 patches worth... thanks -- PMM The following changes since commit e64a62df378a746c0b257105959613c9f8122e59: Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-040320-1' into staging (2020-03-05 12:13:51 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200305 for you to fetch changes up to 597d61a3b1f94c53a3aaa77671697c0c5f797dbf: target/arm: Clean address for DC ZVA (2020-03-05 16:09:21 +0000) ---------------------------------------------------------------- * versal: Implement ADMA * Implement (trivially) ARMv8.2-TTCNP * hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus * Remove unnecessary endianness-handling on some boards * Avoid minor memory leaks from timer_new in some devices * Honour more of the HCR_EL2 trap bits * Complain rather than ignoring bad command line options for cubieboard * Honour TBI for DC ZVA and exception return ---------------------------------------------------------------- Edgar E. Iglesias (2): hw/arm: versal: Add support for the LPD ADMAs hw/arm: versal: Generate xlnx-versal-virt zdma FDT nodes Eric Auger (1): hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus Niek Linnenbank (4): hw/arm/cubieboard: use ARM Cortex-A8 as the default CPU in machine definition hw/arm/cubieboard: restrict allowed CPU type to ARM Cortex-A8 hw/arm/cubieboard: restrict allowed RAM size to 512MiB and 1GiB hw/arm/cubieboard: report error when using unsupported -bios argument Pan Nengyuan (4): hw/arm/pxa2xx: move timer_new from init() into realize() to avoid memleaks hw/arm/spitz: move timer_new from init() into realize() to avoid memleaks hw/arm/strongarm: move timer_new from init() into realize() to avoid memleaks hw/timer/cadence_ttc: move timer_new from init() into realize() to avoid memleaks Peter Maydell (1): target/arm: Implement (trivially) ARMv8.2-TTCNP Philippe Mathieu-Daudé (6): hw/arm/smmu-common: Simplify smmu_find_smmu_pcibus() logic hw/arm/gumstix: Simplify since the machines are little-endian only hw/arm/mainstone: Simplify since the machines are little-endian only hw/arm/omap_sx1: Simplify since the machines are little-endian only hw/arm/z2: Simplify since the machines are little-endian only hw/arm/musicpal: Simplify since the machines are little-endian only Richard Henderson (19): target/arm: Improve masking of HCR/HCR2 RES0 bits target/arm: Add HCR_EL2 bit definitions from ARMv8.6 target/arm: Disable has_el2 and has_el3 for user-only target/arm: Remove EL2 and EL3 setup from user-only target/arm: Improve masking in arm_hcr_el2_eff target/arm: Honor the HCR_EL2.{TVM,TRVM} bits target/arm: Honor the HCR_EL2.TSW bit target/arm: Honor the HCR_EL2.TACR bit target/arm: Honor the HCR_EL2.TPCP bit target/arm: Honor the HCR_EL2.TPU bit target/arm: Honor the HCR_EL2.TTLB bit tests/tcg/aarch64: Add newline in pauth-1 printf target/arm: Replicate TBI/TBID bits for single range regimes target/arm: Optimize cpu_mmu_index target/arm: Introduce core_to_aa64_mmu_idx target/arm: Apply TBI to ESR_ELx in helper_exception_return target/arm: Move helper_dc_zva to helper-a64.c target/arm: Use DEF_HELPER_FLAGS for helper_dc_zva target/arm: Clean address for DC ZVA include/hw/arm/xlnx-versal.h | 6 + target/arm/cpu.h | 30 ++-- target/arm/helper-a64.h | 1 + target/arm/helper.h | 1 - target/arm/internals.h | 6 + hw/arm/cubieboard.c | 29 +++- hw/arm/gumstix.c | 16 +- hw/arm/mainstone.c | 8 +- hw/arm/musicpal.c | 10 -- hw/arm/omap_sx1.c | 11 +- hw/arm/pxa2xx.c | 17 +- hw/arm/smmu-common.c | 20 +-- hw/arm/spitz.c | 8 +- hw/arm/strongarm.c | 18 ++- hw/arm/xlnx-versal-virt.c | 28 ++++ hw/arm/xlnx-versal.c | 24 +++ hw/arm/z2.c | 8 +- hw/timer/cadence_ttc.c | 18 ++- target/arm/cpu.c | 13 +- target/arm/cpu64.c | 2 + target/arm/helper-a64.c | 114 ++++++++++++- target/arm/helper.c | 373 ++++++++++++++++++++++++++++++------------- target/arm/op_helper.c | 93 ----------- target/arm/translate-a64.c | 4 +- tests/tcg/aarch64/pauth-1.c | 2 +- 25 files changed, 551 insertions(+), 309 deletions(-) From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Add support for the Versal LPD ADMAs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 6 ++++++ hw/arm/xlnx-versal.c | 24 ++++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #define XLNX_VERSAL_NR_ACPUS 2 #define XLNX_VERSAL_NR_UARTS 2 #define XLNX_VERSAL_NR_GEMS 2 +#define XLNX_VERSAL_NR_ADMAS 8 #define XLNX_VERSAL_NR_IRQS 192 typedef struct Versal { @@ -XXX,XX +XXX,XX @@ typedef struct Versal { struct { SysBusDevice *uart[XLNX_VERSAL_NR_UARTS]; SysBusDevice *gem[XLNX_VERSAL_NR_GEMS]; + SysBusDevice *adma[XLNX_VERSAL_NR_ADMAS]; } iou; } lpd; @@ -XXX,XX +XXX,XX @@ typedef struct Versal { #define VERSAL_GEM0_WAKE_IRQ_0 57 #define VERSAL_GEM1_IRQ_0 58 #define VERSAL_GEM1_WAKE_IRQ_0 59 +#define VERSAL_ADMA_IRQ_0 60 /* Architecturally reserved IRQs suitable for virtualization. */ #define VERSAL_RSVD_IRQ_FIRST 111 @@ -XXX,XX +XXX,XX @@ typedef struct Versal { #define MM_GEM1 0xff0d0000U #define MM_GEM1_SIZE 0x10000 +#define MM_ADMA_CH0 0xffa80000U +#define MM_ADMA_CH0_SIZE 0x10000 + #define MM_OCM 0xfffc0000U #define MM_OCM_SIZE 0x40000 diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_gems(Versal *s, qemu_irq *pic) } } +static void versal_create_admas(Versal *s, qemu_irq *pic) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.adma); i++) { + char *name = g_strdup_printf("adma%d", i); + DeviceState *dev; + MemoryRegion *mr; + + dev = qdev_create(NULL, "xlnx.zdma"); + s->lpd.iou.adma[i] = SYS_BUS_DEVICE(dev); + object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); + qdev_init_nofail(dev); + + mr = sysbus_mmio_get_region(s->lpd.iou.adma[i], 0); + memory_region_add_subregion(&s->mr_ps, + MM_ADMA_CH0 + i * MM_ADMA_CH0_SIZE, mr); + + sysbus_connect_irq(s->lpd.iou.adma[i], 0, pic[VERSAL_ADMA_IRQ_0 + i]); + g_free(name); + } +} + /* This takes the board allocated linear DDR memory and creates aliases * for each split DDR range/aperture on the Versal address map. */ @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_apu_gic(s, pic); versal_create_uarts(s, pic); versal_create_gems(s, pic); + versal_create_admas(s, pic); versal_map_ddr(s); versal_unimp(s); -- 2.20.1 From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Generate xlnx-versal-virt zdma FDT nodes. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-versal-virt.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_gem_nodes(VersalVirt *s) } } +static void fdt_add_zdma_nodes(VersalVirt *s) +{ + const char clocknames[] = "clk_main\0clk_apb"; + const char compat[] = "xlnx,zynqmp-dma-1.0"; + int i; + + for (i = XLNX_VERSAL_NR_ADMAS - 1; i >= 0; i--) { + uint64_t addr = MM_ADMA_CH0 + MM_ADMA_CH0_SIZE * i; + char *name = g_strdup_printf("/dma@%" PRIx64, addr); + + qemu_fdt_add_subnode(s->fdt, name); + + qemu_fdt_setprop_cell(s->fdt, name, "xlnx,bus-width", 64); + qemu_fdt_setprop_cells(s->fdt, name, "clocks", + s->phandle.clk_25Mhz, s->phandle.clk_25Mhz); + qemu_fdt_setprop(s->fdt, name, "clock-names", + clocknames, sizeof(clocknames)); + qemu_fdt_setprop_cells(s->fdt, name, "interrupts", + GIC_FDT_IRQ_TYPE_SPI, VERSAL_ADMA_IRQ_0 + i, + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, addr, 2, 0x1000); + qemu_fdt_setprop(s->fdt, name, "compatible", compat, sizeof(compat)); + g_free(name); + } +} + static void fdt_nop_memory_nodes(void *fdt, Error **errp) { Error *err = NULL; @@ -XXX,XX +XXX,XX @@ static void versal_virt_init(MachineState *machine) fdt_add_uart_nodes(s); fdt_add_gic_nodes(s); fdt_add_timer_nodes(s); + fdt_add_zdma_nodes(s); fdt_add_cpu_nodes(s, psci_conduit); fdt_add_clk_node(s, "/clk125", 125000000, s->phandle.clk_125Mhz); fdt_add_clk_node(s, "/clk25", 25000000, s->phandle.clk_25Mhz); -- 2.20.1 The ARMv8.2-TTCNP extension allows an implementation to optimize by sharing TLB entries between multiple cores, provided that software declares that it's ready to deal with this by setting a CnP bit in the TTBRn_ELx. It is mandatory from ARMv8.2 onward. For QEMU's TLB implementation, sharing TLB entries between different cores would not really benefit us and would be a lot of work to implement. So we implement this extension in the "trivial" manner: we allow the guest to set and read back the CnP bit, but don't change our behaviour (this is an architecturally valid implementation choice). The only code path which looks at the TTBRn_ELx values for the long-descriptor format where the CnP bit is defined is already doing enough masking to not get confused when the CnP bit at the bottom of the register is set, so we can simply add a comment noting why we're relying on that mask. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200225193822.18874-1-peter.maydell@linaro.org --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 2 ++ target/arm/helper.c | 4 ++++ 3 files changed, 7 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = cpu->isar.id_mmfr4; t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ cpu->isar.id_mmfr4 = t; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); + t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ cpu->isar.id_aa64mmfr2 = t; /* Replicate the same data to the 32-bit id registers. */ @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) u = cpu->isar.id_mmfr4; u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + u = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ cpu->isar.id_mmfr4 = u; u = cpu->isar.id_aa64dfr0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, /* Now we can extract the actual base address from the TTBR */ descaddr = extract64(ttbr, 0, 48); + /* + * We rely on this masking to clear the RES0 bits at the bottom of the TTBR + * and also to mask out CnP (bit 0) which could validly be non-zero. + */ descaddr &= ~indexmask; /* The address field in the descriptor goes up to bit 39 for ARMv7 -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Make sure a null SMMUPciBus is returned in case we were not able to identify a pci bus matching the @bus_num. This matches the fix done on intel iommu in commit: a2e1cd41ccfe796529abfd1b6aeb1dd4393762a2 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200226172628.17449-1-eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUPciBus *smmu_find_smmu_pcibus(SMMUState *s, uint8_t bus_num) return smmu_pci_bus; } } + smmu_pci_bus = NULL; } return smmu_pci_bus; } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The smmu_find_smmu_pcibus() function was introduced (in commit cac994ef43b) in a code format that could return an incorrect pointer, which was then fixed by the previous commit. We could have avoided this by writing the if() statement differently. Do it now, in case this function is re-used. The code is easier to review (harder to miss bugs). Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, SMMUPciBus *smmu_find_smmu_pcibus(SMMUState *s, uint8_t bus_num) { SMMUPciBus *smmu_pci_bus = s->smmu_pcibus_by_bus_num[bus_num]; + GHashTableIter iter; - if (!smmu_pci_bus) { - GHashTableIter iter; - - g_hash_table_iter_init(&iter, s->smmu_pcibus_by_busptr); - while (g_hash_table_iter_next(&iter, NULL, (void **)&smmu_pci_bus)) { - if (pci_bus_num(smmu_pci_bus->bus) == bus_num) { - s->smmu_pcibus_by_bus_num[bus_num] = smmu_pci_bus; - return smmu_pci_bus; - } - } - smmu_pci_bus = NULL; + if (smmu_pci_bus) { + return smmu_pci_bus; } - return smmu_pci_bus; + + g_hash_table_iter_init(&iter, s->smmu_pcibus_by_busptr); + while (g_hash_table_iter_next(&iter, NULL, (void **)&smmu_pci_bus)) { + if (pci_bus_num(smmu_pci_bus->bus) == bus_num) { + s->smmu_pcibus_by_bus_num[bus_num] = smmu_pci_bus; + return smmu_pci_bus; + } + } + + return NULL; } static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As the Connex and Verdex machines only boot in little-endian, we can simplify the code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - int be; MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, be)) { + sector_len, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - int be; MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, be)) { + sector_len, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, DeviceState *mst_irq; DriveInfo *dinfo; int i; - int be; MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, memory_region_set_readonly(rom, true); memory_region_add_subregion(address_space_mem, 0, rom); -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, i ? "mainstone.flash1" : "mainstone.flash0", MAINSTONE_FLASH, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, be)) { + sector_len, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) DriveInfo *dinfo; int fl_idx; uint32_t flash_size = flash0_size; - int be; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) OMAP_CS2_BASE, &cs[3]); fl_idx = 0; -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif - if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, be)) { + sector_size, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS1_BASE, "omap_sx1.flash1-1", flash1_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, be)) { + sector_size, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; - int be; void *z2_lcd; I2CBus *bus; DeviceState *wm; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) /* Setup CPU & memory */ mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, be)) { + sector_len, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) * 0xFF800000 (if there is 8 MB flash). So remap flash access if the * image is smaller than 32 MB. */ -#ifdef TARGET_WORDS_BIGENDIAN - pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, - "musicpal.flash", flash_size, - blk, 0x10000, - MP_FLASH_SIZE_MAX / flash_size, - 2, 0x00BF, 0x236D, 0x0000, 0x0000, - 0x5555, 0x2AAA, 1); -#else pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, blk, 0x10000, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -#endif - } sysbus_create_simple(TYPE_MV88W8618_FLASHCFG, MP_FLASHCFG_BASE, NULL); -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-3-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_init(Object *obj) s->last_rtcpicr = 0; s->last_hz = s->last_sw = s->last_pi = qemu_clock_get_ms(rtc_clock); + sysbus_init_irq(dev, &s->rtc_irq); + + memory_region_init_io(&s->iomem, obj, &pxa2xx_rtc_ops, s, + "pxa2xx-rtc", 0x10000); + sysbus_init_mmio(dev, &s->iomem); +} + +static void pxa2xx_rtc_realize(DeviceState *dev, Error **errp) +{ + PXA2xxRTCState *s = PXA2XX_RTC(dev); s->rtc_hz = timer_new_ms(rtc_clock, pxa2xx_rtc_hz_tick, s); s->rtc_rdal1 = timer_new_ms(rtc_clock, pxa2xx_rtc_rdal1_tick, s); s->rtc_rdal2 = timer_new_ms(rtc_clock, pxa2xx_rtc_rdal2_tick, s); s->rtc_swal1 = timer_new_ms(rtc_clock, pxa2xx_rtc_swal1_tick, s); s->rtc_swal2 = timer_new_ms(rtc_clock, pxa2xx_rtc_swal2_tick, s); s->rtc_pi = timer_new_ms(rtc_clock, pxa2xx_rtc_pi_tick, s); - - sysbus_init_irq(dev, &s->rtc_irq); - - memory_region_init_io(&s->iomem, obj, &pxa2xx_rtc_ops, s, - "pxa2xx-rtc", 0x10000); - sysbus_init_mmio(dev, &s->iomem); } static int pxa2xx_rtc_pre_save(void *opaque) @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_sysbus_class_init(ObjectClass *klass, void *data) dc->desc = "PXA2xx RTC Controller"; dc->vmsd = &vmstate_pxa2xx_rtc_regs; + dc->realize = pxa2xx_rtc_realize; } static const TypeInfo pxa2xx_rtc_sysbus_info = { -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-4-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/spitz.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_init(Object *obj) spitz_keyboard_pre_map(s); - s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); } +static void spitz_keyboard_realize(DeviceState *dev, Error **errp) +{ + SpitzKeyboardState *s = SPITZ_KEYBOARD(dev); + s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); +} + /* LCD backlight controller */ #define LCDTG_RESCTL 0x00 @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_spitz_kbd; + dc->realize = spitz_keyboard_realize; } static const TypeInfo spitz_keyboard_info = { -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-5-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/strongarm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_init(Object *obj) s->last_rcnr = (uint32_t) mktimegm(&tm); s->last_hz = qemu_clock_get_ms(rtc_clock); - s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); - s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); - sysbus_init_irq(dev, &s->rtc_irq); sysbus_init_irq(dev, &s->rtc_hz_irq); @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void strongarm_rtc_realize(DeviceState *dev, Error **errp) +{ + StrongARMRTCState *s = STRONGARM_RTC(dev); + s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); + s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); +} + static int strongarm_rtc_pre_save(void *opaque) { StrongARMRTCState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data) dc->desc = "StrongARM RTC Controller"; dc->vmsd = &vmstate_strongarm_rtc_regs; + dc->realize = strongarm_rtc_realize; } static const TypeInfo strongarm_rtc_sysbus_info = { @@ -XXX,XX +XXX,XX @@ static void strongarm_uart_init(Object *obj) "uart", 0x10000); sysbus_init_mmio(dev, &s->iomem); sysbus_init_irq(dev, &s->irq); - - s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_rx_to, s); - s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); } static void strongarm_uart_realize(DeviceState *dev, Error **errp) { StrongARMUARTState *s = STRONGARM_UART(dev); + s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + strongarm_uart_rx_to, + s); + s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); qemu_chr_fe_set_handlers(&s->chr, strongarm_uart_can_receive, strongarm_uart_receive, -- 2.20.1 From: Pan Nengyuan <pannengyuan@huawei.com> There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200227025055.14341-7-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/cadence_ttc.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/timer/cadence_ttc.c b/hw/timer/cadence_ttc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cadence_ttc.c +++ b/hw/timer/cadence_ttc.c @@ -XXX,XX +XXX,XX @@ static void cadence_timer_init(uint32_t freq, CadenceTimerState *s) static void cadence_ttc_init(Object *obj) { CadenceTTCState *s = CADENCE_TTC(obj); - int i; - - for (i = 0; i < 3; ++i) { - cadence_timer_init(133000000, &s->timer[i]); - sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->timer[i].irq); - } memory_region_init_io(&s->iomem, obj, &cadence_ttc_ops, s, "timer", 0x1000); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void cadence_ttc_realize(DeviceState *dev, Error **errp) +{ + CadenceTTCState *s = CADENCE_TTC(dev); + int i; + + for (i = 0; i < 3; ++i) { + cadence_timer_init(133000000, &s->timer[i]); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->timer[i].irq); + } +} + static int cadence_timer_pre_save(void *opaque) { cadence_timer_sync((CadenceTimerState *)opaque); @@ -XXX,XX +XXX,XX @@ static void cadence_ttc_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_cadence_ttc; + dc->realize = cadence_ttc_realize; } static const TypeInfo cadence_ttc_info = { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Don't merely start with v8.0, handle v7VE as well. Ensure that writes from aarch32 mode do not change bits in the other half of the register. Protect reads of aa64 id registers with ARM_FEATURE_AARCH64. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 38 +++++++++++++++++++++++++------------- 1 file changed, 25 insertions(+), 13 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { REGINFO_SENTINEL }; -static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) +static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) { ARMCPU *cpu = env_archcpu(env); - /* Begin with bits defined in base ARMv8.0. */ - uint64_t valid_mask = MAKE_64BIT_MASK(0, 34); + + if (arm_feature(env, ARM_FEATURE_V8)) { + valid_mask |= MAKE_64BIT_MASK(0, 34); /* ARMv8.0 */ + } else { + valid_mask |= MAKE_64BIT_MASK(0, 28); /* ARMv7VE */ + } if (arm_feature(env, ARM_FEATURE_EL3)) { valid_mask &= ~HCR_HCD; @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) */ valid_mask &= ~HCR_TSC; } - if (cpu_isar_feature(aa64_vh, cpu)) { - valid_mask |= HCR_E2H; - } - if (cpu_isar_feature(aa64_lor, cpu)) { - valid_mask |= HCR_TLOR; - } - if (cpu_isar_feature(aa64_pauth, cpu)) { - valid_mask |= HCR_API | HCR_APK; + + if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (cpu_isar_feature(aa64_vh, cpu)) { + valid_mask |= HCR_E2H; + } + if (cpu_isar_feature(aa64_lor, cpu)) { + valid_mask |= HCR_TLOR; + } + if (cpu_isar_feature(aa64_pauth, cpu)) { + valid_mask |= HCR_API | HCR_APK; + } } /* Clear RES0 bits. */ @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) arm_cpu_update_vfiq(cpu); } +static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) +{ + do_hcr_write(env, value, 0); +} + static void hcr_writehigh(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { /* Handle HCR2 write, i.e. write to high half of HCR_EL2 */ value = deposit64(env->cp15.hcr_el2, 32, 32, value); - hcr_write(env, NULL, value); + do_hcr_write(env, value, MAKE_64BIT_MASK(0, 32)); } static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, { /* Handle HCR write, i.e. write to low half of HCR_EL2 */ value = deposit64(env->cp15.hcr_el2, 0, 32, value); - hcr_write(env, NULL, value); + do_hcr_write(env, value, MAKE_64BIT_MASK(32, 32)); } /* -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_TERR (1ULL << 36) #define HCR_TEA (1ULL << 37) #define HCR_MIOCNCE (1ULL << 38) +/* RES0 bit 39 */ #define HCR_APK (1ULL << 40) #define HCR_API (1ULL << 41) #define HCR_NV (1ULL << 42) @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_NV2 (1ULL << 45) #define HCR_FWB (1ULL << 46) #define HCR_FIEN (1ULL << 47) +/* RES0 bit 48 */ #define HCR_TID4 (1ULL << 49) #define HCR_TICAB (1ULL << 50) +#define HCR_AMVOFFEN (1ULL << 51) #define HCR_TOCU (1ULL << 52) +#define HCR_ENSCXT (1ULL << 53) #define HCR_TTLBIS (1ULL << 54) #define HCR_TTLBOS (1ULL << 55) #define HCR_ATA (1ULL << 56) #define HCR_DCT (1ULL << 57) +#define HCR_TID5 (1ULL << 58) +#define HCR_TWEDEN (1ULL << 59) +#define HCR_TWEDEL MAKE_64BIT_MASK(60, 4) #define SCR_NS (1U << 0) #define SCR_IRQ (1U << 1) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In arm_cpu_reset, we configure many system registers so that user-only behaves as it should with a minimum of ifdefs. However, we do not set all of the system registers as required for a cpu with EL2 and EL3. Disabling EL2 and EL3 mean that we will not look at those registers, which means that we don't have to worry about configuring them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_reset_hivecs_property = static Property arm_cpu_rvbar_property = DEFINE_PROP_UINT64("rvbar", ARMCPU, rvbar, 0); +#ifndef CONFIG_USER_ONLY static Property arm_cpu_has_el2_property = DEFINE_PROP_BOOL("has_el2", ARMCPU, has_el2, true); static Property arm_cpu_has_el3_property = DEFINE_PROP_BOOL("has_el3", ARMCPU, has_el3, true); +#endif static Property arm_cpu_cfgend_property = DEFINE_PROP_BOOL("cfgend", ARMCPU, cfgend, false); @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) qdev_property_add_static(DEVICE(obj), &arm_cpu_rvbar_property); } +#ifndef CONFIG_USER_ONLY if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { /* Add the has_el3 state CPU property only if EL3 is allowed. This will * prevent "has_el3" from existing on CPUs which cannot support EL3. */ qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el3_property); -#ifndef CONFIG_USER_ONLY object_property_add_link(obj, "secure-memory", TYPE_MEMORY_REGION, (Object **)&cpu->secure_memory, qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_STRONG, &error_abort); -#endif } if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el2_property); } +#endif if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) { cpu->has_pmu = true; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We have disabled EL2 and EL3 for user-only, which means that these registers "don't exist" and should not be set. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Enable all PAC keys. */ env->cp15.sctlr_el[1] |= (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB); - /* Enable all PAC instructions */ - env->cp15.hcr_el2 |= HCR_API; - env->cp15.scr_el3 |= SCR_API; /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3); /* and to the SVE instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); - env->cp15.cptr_el[3] |= CPTR_EZ; /* with maximum vector length */ env->vfp.zcr_el[1] = cpu_isar_feature(aa64_sve, cpu) ? cpu->sve_max_vq - 1 : 0; - env->vfp.zcr_el[2] = env->vfp.zcr_el[1]; - env->vfp.zcr_el[3] = env->vfp.zcr_el[1]; /* * Enable TBI0 and TBI1. While the real kernel only enables TBI0, * turning on both here will produce smaller code and otherwise -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Update the {TGE,E2H} == '11' masking to ARMv8.6. If EL2 is configured for aarch32, disable all of the bits that are RES0 in aarch32 mode. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint64_t arm_hcr_el2_eff(CPUARMState *env) * Since the v8.4 language applies to the entire register, and * appears to be backward compatible, use that. */ - ret = 0; - } else if (ret & HCR_TGE) { - /* These bits are up-to-date as of ARMv8.4. */ + return 0; + } + + /* + * For a cpu that supports both aarch64 and aarch32, we can set bits + * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32. + * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32. + */ + if (!arm_el_is_aa64(env, 2)) { + uint64_t aa32_valid; + + /* + * These bits are up-to-date as of ARMv8.6. + * For HCR, it's easiest to list just the 2 bits that are invalid. + * For HCR2, list those that are valid. + */ + aa32_valid = MAKE_64BIT_MASK(0, 32) & ~(HCR_RW | HCR_TDZ); + aa32_valid |= (HCR_CD | HCR_ID | HCR_TERR | HCR_TEA | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_TTLBIS); + ret &= aa32_valid; + } + + if (ret & HCR_TGE) { + /* These bits are up-to-date as of ARMv8.6. */ if (ret & HCR_E2H) { ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO | HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE | HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU | - HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE); + HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_ENSCXT | + HCR_TTLBIS | HCR_TTLBOS | HCR_TID5); } else { ret |= HCR_FMO | HCR_IMO | HCR_AMO; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits trap EL1 access to various virtual memory controls. Buglink: https://bugs.launchpad.net/bugs/1855072 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 82 ++++++++++++++++++++++++++++++--------------- 1 file changed, 55 insertions(+), 27 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ +static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1) { + uint64_t trap = isread ? HCR_TRVM : HCR_TVM; + if (arm_hcr_el2_eff(env) & trap) { + return CP_ACCESS_TRAP_EL2; + } + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { */ { .name = "CONTEXTIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL1_RW, .secure = ARM_CP_SECSTATE_NS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .secure = ARM_CP_SECSTATE_NS, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, { .name = "CONTEXTIDR_S", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .secure = ARM_CP_SECSTATE_S, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_s), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, REGINFO_SENTINEL @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = CP_ANY, .crn = 3, .crm = CP_ANY, .opc2 = CP_ANY, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5, .access = PL0_W, .type = ARM_CP_NOP }, { .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), offsetof(CPUARMState, cp15.ifar_ns) }, .resetvalue = 0, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { */ { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* MAIR can just read-as-written because we don't implement caches * and so don't need to care about memory attributes. */ { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), + .access = PL1_RW, .accessfn = access_tvm_trvm, + .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), .resetvalue = 0 }, { .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { * handled in the field definitions. */ { .name = "MAIR0", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, .access = PL1_RW, + .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s), offsetof(CPUARMState, cp15.mair0_ns) }, .resetfn = arm_cp_reset_ignore }, { .name = "MAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, .access = PL1_RW, + .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s), offsetof(CPUARMState, cp15.mair1_ns) }, .resetfn = arm_cp_reset_ignore }, @@ -XXX,XX +XXX,XX @@ static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_ALIAS, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s), offsetoflow32(CPUARMState, cp15.dfsr_ns) }, }, { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s), offsetoflow32(CPUARMState, cp15.ifsr_ns) } }, { .name = "DFAR", .cp = 15, .opc1 = 0, .crn = 6, .crm = 0, .opc2 = 0, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.dfar_s), offsetof(CPUARMState, cp15.dfar_ns) } }, { .name = "FAR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), + .access = PL1_RW, .accessfn = access_tvm_trvm, + .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), .resetvalue = 0, }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { static const ARMCPRegInfo vmsa_cp_reginfo[] = { { .name = "ESR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, }, { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0, - .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) } }, { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1, - .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_ttbr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) } }, { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, .writefn = vmsa_tcr_el12_write, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = vmsa_tcr_el12_write, .resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) }, { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, .raw_writefn = vmsa_ttbcr_raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]), offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { */ static const ARMCPRegInfo ttbcr2_reginfo = { .name = "TTBCR2", .cp = 15, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_ALIAS, .bank_fieldoffsets = { offsetofhigh32(CPUARMState, cp15.tcr_el[3]), offsetofhigh32(CPUARMState, cp15.tcr_el[1]) }, }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lpae_cp_reginfo[] = { /* NOP AMAIR0/1 */ { .name = "AMAIR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* AMAIR1 is mapped to AMAIR_EL1[63:32] */ { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0, .access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s), offsetof(CPUARMState, cp15.par_ns)} }, { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0, - .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_64BIT | ARM_CP_ALIAS, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), offsetof(CPUARMState, cp15.ttbr0_ns) }, .writefn = vmsa_ttbr_write, }, { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1, - .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .type = ARM_CP_64BIT | ARM_CP_ALIAS, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) }, .writefn = vmsa_ttbr_write, }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .type = ARM_CP_NOP, .access = PL1_W }, /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, - .access = PL1_RW, .resetvalue = 0, + .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo sctlr = { .name = "SCTLR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, - .access = PL1_RW, + .access = PL1_RW, .accessfn = access_tvm_trvm, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), offsetof(CPUARMState, cp15.sctlr_ns) }, .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits trap EL1 access to set/way cache maintenance insns. Buglink: https://bugs.launchpad.net/bugs/1863685 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TSW. */ +static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TSW)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_W, .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, .accessfn = aa64_cacheop_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, /* MMU Domain access control / MPU write buffer control */ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to the auxiliary control registers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TACR. */ +static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TACR)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ats1cp_reginfo[] = { static const ARMCPRegInfo actlr2_hactlr2_reginfo[] = { { .name = "ACTLR2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .access = PL1_RW, .accessfn = access_tacr, + .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "HACTLR2", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 3, .access = PL2_RW, .type = ARM_CP_CONST, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo auxcr_reginfo[] = { { .name = "ACTLR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, - .resetvalue = cpu->reset_auxcr }, + .access = PL1_RW, .accessfn = access_tacr, + .type = ARM_CP_CONST, .resetvalue = cpu->reset_auxcr }, { .name = "ACTLR_EL2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 1, .access = PL2_RW, .type = ARM_CP_CONST, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to cache maintenance insns that operate to the point of coherency or persistence. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 39 +++++++++++++++++++++++++++++++-------- 1 file changed, 31 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_access(CPUARMState *env, return CP_ACCESS_OK; } +static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* Cache invalidate/clean to Point of Coherency or Persistence... */ + switch (arm_current_el(env)) { + case 0: + /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { + return CP_ACCESS_TRAP; + } + /* fall through */ + case 1: + /* ... EL1 must trap to EL2 if HCR_EL2.TPCP is set. */ + if (arm_hcr_el2_eff(env) & HCR_TPCP) { + return CP_ACCESS_TRAP_EL2; + } + break; + } + return CP_ACCESS_OK; +} + /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .accessfn = aa64_cacheop_access }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .accessfn = aa64_cacheop_poc_access, + .type = ARM_CP_NOP }, { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_poc_access }, { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, /* MMU Domain access control / MPU write buffer control */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpop_reg[] = { { .name = "DC_CVAP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, - .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpodp_reg[] = { { .name = "DC_CVADP", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, - .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, REGINFO_SENTINEL }; #endif /*CONFIG_USER_ONLY*/ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to cache maintenance insns that operate to the point of unification. There are no longer any references to plain aa64_cacheop_access, so remove it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 53 +++++++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo uao_reginfo = { .readfn = aa64_uao_read, .writefn = aa64_uao_write }; -static CPAccessResult aa64_cacheop_access(CPUARMState *env, - const ARMCPRegInfo *ri, - bool isread) -{ - /* Cache invalidate/clean: NOP, but EL0 must UNDEF unless - * SCTLR_EL1.UCI is set. - */ - if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UCI)) { - return CP_ACCESS_TRAP; - } - return CP_ACCESS_OK; -} - static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, return CP_ACCESS_OK; } +static CPAccessResult aa64_cacheop_pou_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* Cache invalidate/clean to Point of Unification... */ + switch (arm_current_el(env)) { + case 0: + /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { + return CP_ACCESS_TRAP; + } + /* fall through */ + case 1: + /* ... EL1 must trap to EL2 if HCR_EL2.TPU is set. */ + if (arm_hcr_el2_eff(env) & HCR_TPU) { + return CP_ACCESS_TRAP_EL2; + } + break; + } + return CP_ACCESS_OK; +} + /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { /* Cache ops: all NOPs since we don't emulate caches */ { .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .type = ARM_CP_NOP, + .accessfn = aa64_cacheop_pou_access }, { .name = "IC_IALLU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NOP }, + .access = PL1_W, .type = ARM_CP_NOP, + .accessfn = aa64_cacheop_pou_access }, { .name = "IC_IVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_pou_access }, { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, .access = PL1_W, .accessfn = aa64_cacheop_poc_access, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, - .accessfn = aa64_cacheop_access }, + .accessfn = aa64_cacheop_pou_access }, { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NOP, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .writefn = tlbiipas2_is_write }, /* 32 bit cache operations */ { .name = "ICIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "BPIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "ICIALLU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "ICIMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "BPIALL", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W }, { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, - .type = ARM_CP_NOP, .access = PL1_W }, + .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This bit traps EL1 access to tlb maintenance insns. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 85 +++++++++++++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 30 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +/* Check for traps from EL1 due to HCR_EL2.TTLB. */ +static CPAccessResult access_ttlb(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TTLB)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .type = ARM_CP_NO_RAW, .access = PL1_R, .readfn = isr_read }, /* 32 bit ITLB invalidates */ { .name = "ITLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "ITLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "ITLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, /* 32 bit DTLB invalidates */ { .name = "DTLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "DTLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "DTLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, /* 32 bit TLB invalidates */ { .name = "TLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_write }, { .name = "TLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "TLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiasid_write }, { .name = "TLBIMVAA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimvaa_write }, REGINFO_SENTINEL }; static const ARMCPRegInfo v7mp_cp_reginfo[] = { /* 32 bit TLB invalidates, Inner Shareable */ { .name = "TLBIALLIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbiall_is_write }, { .name = "TLBIMVAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_is_write }, { .name = "TLBIASIDIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbiasid_is_write }, { .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { /* TLBI operations */ { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1is_write }, { .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vmalle1_write }, { .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, - .access = PL1_W, .type = ARM_CP_NO_RAW, + .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae1_write }, { .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { #endif /* TLB invalidate last level of translation table walk */ { .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_is_write }, { .name = "TLBIMVAALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, - .type = ARM_CP_NO_RAW, .access = PL1_W, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, { .name = "TLBIMVAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimva_write }, { .name = "TLBIMVAAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, - .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write }, + .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, + .writefn = tlbimvaa_write }, { .name = "TLBIMVALH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, .type = ARM_CP_NO_RAW, .access = PL2_W, .writefn = tlbimva_hyp_write }, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Make the output just a bit prettier when running by hand. Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pauth-1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/tcg/aarch64/pauth-1.c b/tests/tcg/aarch64/pauth-1.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/pauth-1.c +++ b/tests/tcg/aarch64/pauth-1.c @@ -XXX,XX +XXX,XX @@ int main() } perc = (float) count / (float) (TESTS * 2); - printf("Ptr Check: %0.2f%%", perc * 100.0); + printf("Ptr Check: %0.2f%%\n", perc * 100.0); assert(perc > 0.95); return 0; } -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard is a singleboard computer with an Allwinner A10 System-on-Chip [1]. As documented in the Allwinner A10 User Manual V1.5 [2], the SoC has an ARM Cortex-A8 processor. Currently the Cubieboard machine definition specifies the ARM Cortex-A9 in its description and as the default CPU. This patch corrects the Cubieboard machine definition to use the ARM Cortex-A8. The only user-visible effect is that our textual description of the machine was wrong, because hw/arm/allwinner-a10.c always creates a Cortex-A8 CPU regardless of the default value in the MachineClass struct. [1] http://docs.cubieboard.org/products/start#cubieboard1 [2] https://linux-sunxi.org/File:Allwinner_A10_User_manual_V1.5.pdf Fixes: 8a863c8120994981a099 Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-2-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [note in commit message that the bug didn't have much visible effect] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) static void cubieboard_machine_init(MachineClass *mc) { - mc->desc = "cubietech cubieboard (Cortex-A9)"; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); + mc->desc = "cubietech cubieboard (Cortex-A8)"; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); mc->init = cubieboard_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard has an ARM Cortex-A8. Instead of simply ignoring a bogus -cpu option provided by the user, give them an error message so they know their command line is wrong. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-3-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info cubieboard_binfo = { static void cubieboard_init(MachineState *machine) { - AwA10State *a10 = AW_A10(object_new(TYPE_AW_A10)); + AwA10State *a10; Error *err = NULL; + /* Only allow Cortex-A8 for this board */ + if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a8")) != 0) { + error_report("This board can only be used with cortex-a8 CPU"); + exit(1); + } + + a10 = AW_A10(object_new(TYPE_AW_A10)); + object_property_set_int(OBJECT(&a10->emac), 1, "phy-addr", &err); if (err != NULL) { error_reportf_err(err, "Couldn't set phy address: "); -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard contains either 512MiB or 1GiB of onboard RAM [1]. Prevent changing RAM to a different size which could break user programs. [1] http://linux-sunxi.org/Cubieboard Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-4-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) AwA10State *a10; Error *err = NULL; + /* This board has fixed size RAM (512MiB or 1GiB) */ + if (machine->ram_size != 512 * MiB && + machine->ram_size != 1 * GiB) { + error_report("This machine can only be used with 512MiB or 1GiB RAM"); + exit(1); + } + /* Only allow Cortex-A8 for this board */ if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a8")) != 0) { error_report("This board can only be used with cortex-a8 CPU"); @@ -XXX,XX +XXX,XX @@ static void cubieboard_machine_init(MachineClass *mc) { mc->desc = "cubietech cubieboard (Cortex-A8)"; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); + mc->default_ram_size = 1 * GiB; mc->init = cubieboard_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Cubieboard machine does not support the -bios argument. Report an error when -bios is used and exit immediately. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200227220149.6845-5-nieklinnenbank@gmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "qapi/error.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/sysbus.h" #include "hw/boards.h" #include "hw/arm/allwinner-a10.h" @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) AwA10State *a10; Error *err = NULL; + /* BIOS is not supported by this board */ + if (bios_name) { + error_report("BIOS not supported for this machine"); + exit(1); + } + /* This board has fixed size RAM (512MiB or 1GiB) */ if (machine->ram_size != 512 * MiB && machine->ram_size != 1 * GiB) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Replicate the single TBI bit from TCR_EL2 and TCR_EL3 so that we can unconditionally use pointer bit 55 to index into our composite TBI1:TBI0 field. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx) } else if (mmu_idx == ARMMMUIdx_Stage2) { return 0; /* VTCR_EL2 */ } else { - return extract32(tcr, 20, 1); + /* Replicate the single TBI bit so we always have 2 bits. */ + return extract32(tcr, 20, 1) * 3; } } @@ -XXX,XX +XXX,XX @@ static int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx) } else if (mmu_idx == ARMMMUIdx_Stage2) { return 0; /* VTCR_EL2 */ } else { - return extract32(tcr, 29, 1); + /* Replicate the single TBID bit so we always have 2 bits. */ + return extract32(tcr, 29, 1) * 3; } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We now cache the core mmu_idx in env->hflags. Rather than recompute from scratch, extract the field. All of the uses of cpu_mmu_index within target/arm are within helpers, and env->hflags is always stable within a translation block from whence helpers are called. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 23 +++++++++++++---------- target/arm/helper.c | 5 ----- 2 files changed, 13 insertions(+), 15 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { #define MMU_USER_IDX 0 -/** - * cpu_mmu_index: - * @env: The cpu environment - * @ifetch: True for code access, false for data access. - * - * Return the core mmu index for the current translation regime. - * This function is used by generic TCG code paths. - */ -int cpu_mmu_index(CPUARMState *env, bool ifetch); - /* Indexes used when registering address spaces with cpu_address_space_init */ typedef enum ARMASIdx { ARMASIdx_NS = 0, @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */ FIELD(TBFLAG_A64, TBID, 12, 2) FIELD(TBFLAG_A64, UNPRIV, 14, 1) +/** + * cpu_mmu_index: + * @env: The cpu environment + * @ifetch: True for code access, false for data access. + * + * Return the core mmu index for the current translation regime. + * This function is used by generic TCG code paths. + */ +static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) +{ + return FIELD_EX32(env->hflags, TBFLAG_ANY, MMUIDX); +} + static inline bool bswap_code(bool sctlr_b) { #ifdef CONFIG_USER_ONLY diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_mmu_idx(CPUARMState *env) return arm_mmu_idx_el(env, arm_current_el(env)); } -int cpu_mmu_index(CPUARMState *env, bool ifetch) -{ - return arm_to_core_mmu_idx(arm_mmu_idx(env)); -} - #ifndef CONFIG_USER_ONLY ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> If by context we know that we're in AArch64 mode, we need not test for M-profile when reconstructing the full ARMMMUIdx. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/translate-a64.c | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) } } +static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) +{ + /* AArch64 is always a-profile. */ + return mmu_idx | ARM_MMU_IDX_A; +} + int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->condexec_mask = 0; dc->condexec_cond = 0; core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX); - dc->mmu_idx = core_to_arm_mmu_idx(env, core_mmu_idx); + dc->mmu_idx = core_to_aa64_mmu_idx(core_mmu_idx); dc->tbii = FIELD_EX32(tb_flags, TBFLAG_A64, TBII); dc->tbid = FIELD_EX32(tb_flags, TBFLAG_A64, TBID); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We missed this case within AArch64.ExceptionReturn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200302175829.2183-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) "AArch32 EL%d PC 0x%" PRIx32 "\n", cur_el, new_el, env->regs[15]); } else { + int tbii; + env->aarch64 = 1; spsr &= aarch64_pstate_valid_mask(&env_archcpu(env)->isar); pstate_write(env, spsr); @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) env->pstate &= ~PSTATE_SS; } aarch64_restore_sp(env, new_el); - env->pc = new_pc; helper_rebuild_hflags_a64(env, new_el); + + /* + * Apply TBI to the exception return address. We had to delay this + * until after we selected the new EL, so that we could select the + * correct TBI+TBID bits. This is made easier by waiting until after + * the hflags rebuild, since we can pull the composite TBII field + * from there. + */ + tbii = FIELD_EX32(env->hflags, TBFLAG_A64, TBII); + if ((tbii >> extract64(new_pc, 55, 1)) & 1) { + /* TBI is enabled. */ + int core_mmu_idx = cpu_mmu_index(env, false); + if (regime_has_2_ranges(core_to_aa64_mmu_idx(core_mmu_idx))) { + new_pc = sextract64(new_pc, 0, 56); + } else { + new_pc = extract64(new_pc, 0, 56); + } + } + env->pc = new_pc; + qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch64 EL%d PC 0x%" PRIx64 "\n", cur_el, new_el, env->pc); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is an aarch64-only function. Move it out of the shared file. This patch is code movement only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 1 + target/arm/helper.h | 1 - target/arm/helper-a64.c | 91 ++++++++++++++++++++++++++++++++++++++++ target/arm/op_helper.c | 93 ----------------------------------------- 4 files changed, 92 insertions(+), 94 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) DEF_HELPER_2(exception_return, void, env, i64) +DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) -DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "cpu.h" #include "exec/gdbstub.h" #include "exec/helper-proto.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sqrt_f16)(uint32_t a, void *fpstp) return float16_sqrt(a, s); } +void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) +{ + /* + * Implement DC ZVA, which zeroes a fixed-length block of memory. + * Note that we do not implement the (architecturally mandated) + * alignment fault for attempts to use this on Device memory + * (which matches the usual QEMU behaviour of not implementing either + * alignment faults or any memory attribute handling). + */ + ARMCPU *cpu = env_archcpu(env); + uint64_t blocklen = 4 << cpu->dcz_blocksize; + uint64_t vaddr = vaddr_in & ~(blocklen - 1); + +#ifndef CONFIG_USER_ONLY + { + /* + * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than + * the block size so we might have to do more than one TLB lookup. + * We know that in fact for any v8 CPU the page size is at least 4K + * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only + * 1K as an artefact of legacy v5 subpage support being present in the + * same QEMU executable. So in practice the hostaddr[] array has + * two entries, given the current setting of TARGET_PAGE_BITS_MIN. + */ + int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); + void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; + int try, i; + unsigned mmu_idx = cpu_mmu_index(env, false); + TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); + + assert(maxidx <= ARRAY_SIZE(hostaddr)); + + for (try = 0; try < 2; try++) { + + for (i = 0; i < maxidx; i++) { + hostaddr[i] = tlb_vaddr_to_host(env, + vaddr + TARGET_PAGE_SIZE * i, + 1, mmu_idx); + if (!hostaddr[i]) { + break; + } + } + if (i == maxidx) { + /* + * If it's all in the TLB it's fair game for just writing to; + * we know we don't need to update dirty status, etc. + */ + for (i = 0; i < maxidx - 1; i++) { + memset(hostaddr[i], 0, TARGET_PAGE_SIZE); + } + memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); + return; + } + /* + * OK, try a store and see if we can populate the tlb. This + * might cause an exception if the memory isn't writable, + * in which case we will longjmp out of here. We must for + * this purpose use the actual register value passed to us + * so that we get the fault address right. + */ + helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); + /* Now we can populate the other TLB entries, if any */ + for (i = 0; i < maxidx; i++) { + uint64_t va = vaddr + TARGET_PAGE_SIZE * i; + if (va != (vaddr_in & TARGET_PAGE_MASK)) { + helper_ret_stb_mmu(env, va, 0, oi, GETPC()); + } + } + } + + /* + * Slow path (probably attempt to do this to an I/O device or + * similar, or clearing of a block of code we have translations + * cached for). Just do a series of byte writes as the architecture + * demands. It's not worth trying to use a cpu_physical_memory_map(), + * memset(), unmap() sequence here because: + * + we'd need to account for the blocksize being larger than a page + * + the direct-RAM access case is almost always going to be dealt + * with in the fastpath code above, so there's no speed benefit + * + we would have to deal with the map returning NULL because the + * bounce buffer was in use + */ + for (i = 0; i < blocklen; i++) { + helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); + } + } +#else + memset(g2h(vaddr), 0, blocklen); +#endif +} diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ * License along with this library; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" -#include "qemu/units.h" #include "qemu/log.h" #include "qemu/main-loop.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(ror_cc)(CPUARMState *env, uint32_t x, uint32_t i) return ((uint32_t)x >> shift) | (x << (32 - shift)); } } - -void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) -{ - /* - * Implement DC ZVA, which zeroes a fixed-length block of memory. - * Note that we do not implement the (architecturally mandated) - * alignment fault for attempts to use this on Device memory - * (which matches the usual QEMU behaviour of not implementing either - * alignment faults or any memory attribute handling). - */ - - ARMCPU *cpu = env_archcpu(env); - uint64_t blocklen = 4 << cpu->dcz_blocksize; - uint64_t vaddr = vaddr_in & ~(blocklen - 1); - -#ifndef CONFIG_USER_ONLY - { - /* - * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than - * the block size so we might have to do more than one TLB lookup. - * We know that in fact for any v8 CPU the page size is at least 4K - * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only - * 1K as an artefact of legacy v5 subpage support being present in the - * same QEMU executable. So in practice the hostaddr[] array has - * two entries, given the current setting of TARGET_PAGE_BITS_MIN. - */ - int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); - void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; - int try, i; - unsigned mmu_idx = cpu_mmu_index(env, false); - TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); - - assert(maxidx <= ARRAY_SIZE(hostaddr)); - - for (try = 0; try < 2; try++) { - - for (i = 0; i < maxidx; i++) { - hostaddr[i] = tlb_vaddr_to_host(env, - vaddr + TARGET_PAGE_SIZE * i, - 1, mmu_idx); - if (!hostaddr[i]) { - break; - } - } - if (i == maxidx) { - /* - * If it's all in the TLB it's fair game for just writing to; - * we know we don't need to update dirty status, etc. - */ - for (i = 0; i < maxidx - 1; i++) { - memset(hostaddr[i], 0, TARGET_PAGE_SIZE); - } - memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); - return; - } - /* - * OK, try a store and see if we can populate the tlb. This - * might cause an exception if the memory isn't writable, - * in which case we will longjmp out of here. We must for - * this purpose use the actual register value passed to us - * so that we get the fault address right. - */ - helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); - /* Now we can populate the other TLB entries, if any */ - for (i = 0; i < maxidx; i++) { - uint64_t va = vaddr + TARGET_PAGE_SIZE * i; - if (va != (vaddr_in & TARGET_PAGE_MASK)) { - helper_ret_stb_mmu(env, va, 0, oi, GETPC()); - } - } - } - - /* - * Slow path (probably attempt to do this to an I/O device or - * similar, or clearing of a block of code we have translations - * cached for). Just do a series of byte writes as the architecture - * demands. It's not worth trying to use a cpu_physical_memory_map(), - * memset(), unmap() sequence here because: - * + we'd need to account for the blocksize being larger than a page - * + the direct-RAM access case is almost always going to be dealt - * with in the fastpath code above, so there's no speed benefit - * + we would have to deal with the map returning NULL because the - * bounce buffer was in use - */ - for (i = 0; i < blocklen; i++) { - helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); - } - } -#else - memset(g2h(vaddr), 0, blocklen); -#endif -} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The function does not write registers, and only reads them by implication via the exception path. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200302175829.2183-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) DEF_HELPER_2(exception_return, void, env, i64) -DEF_HELPER_2(dc_zva, void, env, i64) +DEF_HELPER_FLAGS_2(dc_zva, TCG_CALL_NO_WG, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This data access was forgotten when we added support for cleaning addresses of TBI information. Fixes: 3a471103ac1823ba Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200302175829.2183-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, return; case ARM_CP_DC_ZVA: /* Writes clear the aligned block of memory which rt points into. */ - tcg_rt = cpu_reg(s, rt); + tcg_rt = clean_data_tbi(s, cpu_reg(s, rt)); gen_helper_dc_zva(cpu_env, tcg_rt); return; default: -- 2.20.1 The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1