From: Heyi Guo <guoheyi@huawei.com>

According to ACPI spec, _ADR should be used for device on a bus that
has a standard enumeration algorithm, but not for device which is on
system bus and must be enumerated by OSPM. And it is not recommended
to contain both _HID and _ADR in a single device.

See ACPI 6.3, section 6.1, top of page 343:

A device object must contain either an _HID object or an _ADR object,
but should not contain both.

(https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf)

Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-4-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt-acpi-build.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 9f4c7d1889c..be752c0ad8e 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -78,11 +78,6 @@ static void acpi_dsdt_add_uart(Aml *scope, const MemMapEntry *uart_memmap,
                              AML_EXCLUSIVE, &uart_irq, 1));
     aml_append(dev, aml_name_decl("_CRS", crs));
 
-    /* The _ADR entry is used to link this device to the UART described
-     * in the SPCR table, i.e. SPCR.base_address.address == _ADR.
-     */
-    aml_append(dev, aml_name_decl("_ADR", aml_int(uart_memmap->base)));
-
     aml_append(scope, dev);
 }
 
@@ -170,7 +165,6 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
     aml_append(dev, aml_name_decl("_CID", aml_string("PNP0A03")));
     aml_append(dev, aml_name_decl("_SEG", aml_int(0)));
     aml_append(dev, aml_name_decl("_BBN", aml_int(0)));
-    aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
     aml_append(dev, aml_name_decl("_UID", aml_string("PCI0")));
     aml_append(dev, aml_name_decl("_STR", aml_unicode("PCIe 0 Device")));
     aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
@@ -334,7 +328,6 @@ static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap,
 {
     Aml *dev = aml_device("GPO0");
     aml_append(dev, aml_name_decl("_HID", aml_string("ARMH0061")));
-    aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
     aml_append(dev, aml_name_decl("_UID", aml_int(0)));
 
     Aml *crs = aml_resource_template();
@@ -364,7 +357,6 @@ static void acpi_dsdt_add_power_button(Aml *scope)
 {
     Aml *dev = aml_device(ACPI_POWER_BUTTON_DEVICE);
     aml_append(dev, aml_name_decl("_HID", aml_string("PNP0C0C")));
-    aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
     aml_append(dev, aml_name_decl("_UID", aml_int(0)));
     aml_append(scope, dev);
 }
-- 
2.20.1