bsd-user/syscall.c | 6 +++--- configure | 4 +++- linux-user/exit.c | 4 ++-- linux-user/signal.c | 2 +- tests/check-block.sh | 2 +- 5 files changed, 10 insertions(+), 8 deletions(-)
TARGET_GPROF is the same for all targets, write it to
config-host.mak instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
bsd-user/syscall.c | 6 +++---
configure | 4 +++-
linux-user/exit.c | 4 ++--
linux-user/signal.c | 2 +-
tests/check-block.sh | 2 +-
5 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/bsd-user/syscall.c b/bsd-user/syscall.c
index 0d45b654bb..d38ec7a162 100644
--- a/bsd-user/syscall.c
+++ b/bsd-user/syscall.c
@@ -330,7 +330,7 @@ abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1,
switch(num) {
case TARGET_FREEBSD_NR_exit:
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
_mcleanup();
#endif
gdb_exit(cpu_env, arg1);
@@ -432,7 +432,7 @@ abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1,
switch(num) {
case TARGET_NETBSD_NR_exit:
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
_mcleanup();
#endif
gdb_exit(cpu_env, arg1);
@@ -511,7 +511,7 @@ abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1,
switch(num) {
case TARGET_OPENBSD_NR_exit:
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
_mcleanup();
#endif
gdb_exit(cpu_env, arg1);
diff --git a/configure b/configure
index 5095f01728..08c28e73db 100755
--- a/configure
+++ b/configure
@@ -6771,6 +6771,9 @@ fi
if test "$l2tpv3" = "yes" ; then
echo "CONFIG_L2TPV3=y" >> $config_host_mak
fi
+if test "$gprof" = "yes" ; then
+ echo "CONFIG_GPROF=y" >> $config_host_mak
+fi
if test "$cap_ng" = "yes" ; then
echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak
fi
@@ -7951,7 +7954,6 @@ alpha)
esac
if test "$gprof" = "yes" ; then
- echo "TARGET_GPROF=y" >> $config_target_mak
if test "$target_linux_user" = "yes" ; then
cflags="-p $cflags"
ldflags="-p $ldflags"
diff --git a/linux-user/exit.c b/linux-user/exit.c
index a362ef67d2..1594015444 100644
--- a/linux-user/exit.c
+++ b/linux-user/exit.c
@@ -18,7 +18,7 @@
*/
#include "qemu/osdep.h"
#include "qemu.h"
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
#include <sys/gmon.h>
#endif
@@ -28,7 +28,7 @@ extern void __gcov_dump(void);
void preexit_cleanup(CPUArchState *env, int code)
{
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
_mcleanup();
#endif
#ifdef CONFIG_GCOV
diff --git a/linux-user/signal.c b/linux-user/signal.c
index 5ca6d62b15..02f860ecb9 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -509,7 +509,7 @@ void signal_init(void)
act.sa_flags = SA_SIGINFO;
act.sa_sigaction = host_signal_handler;
for(i = 1; i <= TARGET_NSIG; i++) {
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
if (i == SIGPROF) {
continue;
}
diff --git a/tests/check-block.sh b/tests/check-block.sh
index 679aedec50..ad320c21ba 100755
--- a/tests/check-block.sh
+++ b/tests/check-block.sh
@@ -16,7 +16,7 @@ if [ "$#" -ne 0 ]; then
format_list="$@"
fi
-if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then
+if grep -q "CONFIG_GPROF=y" config-host.mak 2>/dev/null ; then
echo "GPROF is enabled ==> Not running the qemu-iotests."
exit 0
fi
--
2.21.0
On Tue, Feb 4, 2020 at 5:11 PM Paolo Bonzini <pbonzini@redhat.com> wrote: > > TARGET_GPROF is the same for all targets, write it to > config-host.mak instead. > > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> > --- > bsd-user/syscall.c | 6 +++--- > configure | 4 +++- > linux-user/exit.c | 4 ++-- > linux-user/signal.c | 2 +- > tests/check-block.sh | 2 +- > 5 files changed, 10 insertions(+), 8 deletions(-) > > diff --git a/bsd-user/syscall.c b/bsd-user/syscall.c > index 0d45b654bb..d38ec7a162 100644 > --- a/bsd-user/syscall.c > +++ b/bsd-user/syscall.c > @@ -330,7 +330,7 @@ abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_FREEBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > @@ -432,7 +432,7 @@ abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_NETBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > @@ -511,7 +511,7 @@ abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_OPENBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > diff --git a/configure b/configure > index 5095f01728..08c28e73db 100755 > --- a/configure > +++ b/configure > @@ -6771,6 +6771,9 @@ fi > if test "$l2tpv3" = "yes" ; then > echo "CONFIG_L2TPV3=y" >> $config_host_mak > fi > +if test "$gprof" = "yes" ; then > + echo "CONFIG_GPROF=y" >> $config_host_mak > +fi > if test "$cap_ng" = "yes" ; then > echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak > fi > @@ -7951,7 +7954,6 @@ alpha) > esac > > if test "$gprof" = "yes" ; then > - echo "TARGET_GPROF=y" >> $config_target_mak > if test "$target_linux_user" = "yes" ; then > cflags="-p $cflags" > ldflags="-p $ldflags" > diff --git a/linux-user/exit.c b/linux-user/exit.c > index a362ef67d2..1594015444 100644 > --- a/linux-user/exit.c > +++ b/linux-user/exit.c > @@ -18,7 +18,7 @@ > */ > #include "qemu/osdep.h" > #include "qemu.h" > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > #include <sys/gmon.h> > #endif > > @@ -28,7 +28,7 @@ extern void __gcov_dump(void); > > void preexit_cleanup(CPUArchState *env, int code) > { > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > #ifdef CONFIG_GCOV > diff --git a/linux-user/signal.c b/linux-user/signal.c > index 5ca6d62b15..02f860ecb9 100644 > --- a/linux-user/signal.c > +++ b/linux-user/signal.c > @@ -509,7 +509,7 @@ void signal_init(void) > act.sa_flags = SA_SIGINFO; > act.sa_sigaction = host_signal_handler; > for(i = 1; i <= TARGET_NSIG; i++) { > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > if (i == SIGPROF) { > continue; > } > diff --git a/tests/check-block.sh b/tests/check-block.sh > index 679aedec50..ad320c21ba 100755 > --- a/tests/check-block.sh > +++ b/tests/check-block.sh > @@ -16,7 +16,7 @@ if [ "$#" -ne 0 ]; then > format_list="$@" > fi > > -if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then > +if grep -q "CONFIG_GPROF=y" config-host.mak 2>/dev/null ; then > echo "GPROF is enabled ==> Not running the qemu-iotests." > exit 0 > fi > -- > 2.21.0 > > -- Marc-André Lureau
Paolo Bonzini <pbonzini@redhat.com> writes: > TARGET_GPROF is the same for all targets, write it to > config-host.mak instead. > > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> > --- > bsd-user/syscall.c | 6 +++--- > configure | 4 +++- > linux-user/exit.c | 4 ++-- > linux-user/signal.c | 2 +- > tests/check-block.sh | 2 +- > 5 files changed, 10 insertions(+), 8 deletions(-) > > diff --git a/bsd-user/syscall.c b/bsd-user/syscall.c > index 0d45b654bb..d38ec7a162 100644 > --- a/bsd-user/syscall.c > +++ b/bsd-user/syscall.c > @@ -330,7 +330,7 @@ abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_FREEBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > @@ -432,7 +432,7 @@ abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_NETBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > @@ -511,7 +511,7 @@ abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_OPENBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > diff --git a/configure b/configure > index 5095f01728..08c28e73db 100755 > --- a/configure > +++ b/configure > @@ -6771,6 +6771,9 @@ fi > if test "$l2tpv3" = "yes" ; then > echo "CONFIG_L2TPV3=y" >> $config_host_mak > fi > +if test "$gprof" = "yes" ; then > + echo "CONFIG_GPROF=y" >> $config_host_mak > +fi > if test "$cap_ng" = "yes" ; then > echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak > fi > @@ -7951,7 +7954,6 @@ alpha) > esac > > if test "$gprof" = "yes" ; then > - echo "TARGET_GPROF=y" >> $config_target_mak > if test "$target_linux_user" = "yes" ; then > cflags="-p $cflags" > ldflags="-p $ldflags" > diff --git a/linux-user/exit.c b/linux-user/exit.c > index a362ef67d2..1594015444 100644 > --- a/linux-user/exit.c > +++ b/linux-user/exit.c > @@ -18,7 +18,7 @@ > */ > #include "qemu/osdep.h" > #include "qemu.h" > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > #include <sys/gmon.h> > #endif > > @@ -28,7 +28,7 @@ extern void __gcov_dump(void); > > void preexit_cleanup(CPUArchState *env, int code) > { > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > #ifdef CONFIG_GCOV > diff --git a/linux-user/signal.c b/linux-user/signal.c > index 5ca6d62b15..02f860ecb9 100644 > --- a/linux-user/signal.c > +++ b/linux-user/signal.c > @@ -509,7 +509,7 @@ void signal_init(void) > act.sa_flags = SA_SIGINFO; > act.sa_sigaction = host_signal_handler; > for(i = 1; i <= TARGET_NSIG; i++) { > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > if (i == SIGPROF) { > continue; > } > diff --git a/tests/check-block.sh b/tests/check-block.sh > index 679aedec50..ad320c21ba 100755 > --- a/tests/check-block.sh > +++ b/tests/check-block.sh > @@ -16,7 +16,7 @@ if [ "$#" -ne 0 ]; then > format_list="$@" > fi > > -if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then > +if grep -q "CONFIG_GPROF=y" config-host.mak 2>/dev/null ; then > echo "GPROF is enabled ==> Not running the qemu-iotests." > exit 0 > fi -- Alex Bennée
On 2/4/20 5:11 PM, Paolo Bonzini wrote: > TARGET_GPROF is the same for all targets, write it to > config-host.mak instead. > > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> > --- > bsd-user/syscall.c | 6 +++--- > configure | 4 +++- > linux-user/exit.c | 4 ++-- > linux-user/signal.c | 2 +- > tests/check-block.sh | 2 +- > 5 files changed, 10 insertions(+), 8 deletions(-) > > diff --git a/bsd-user/syscall.c b/bsd-user/syscall.c > index 0d45b654bb..d38ec7a162 100644 > --- a/bsd-user/syscall.c > +++ b/bsd-user/syscall.c > @@ -330,7 +330,7 @@ abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_FREEBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > @@ -432,7 +432,7 @@ abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_NETBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > @@ -511,7 +511,7 @@ abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1, > > switch(num) { > case TARGET_OPENBSD_NR_exit: > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > gdb_exit(cpu_env, arg1); > diff --git a/configure b/configure > index 5095f01728..08c28e73db 100755 > --- a/configure > +++ b/configure > @@ -6771,6 +6771,9 @@ fi > if test "$l2tpv3" = "yes" ; then > echo "CONFIG_L2TPV3=y" >> $config_host_mak > fi > +if test "$gprof" = "yes" ; then > + echo "CONFIG_GPROF=y" >> $config_host_mak > +fi > if test "$cap_ng" = "yes" ; then > echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak > fi > @@ -7951,7 +7954,6 @@ alpha) > esac > > if test "$gprof" = "yes" ; then > - echo "TARGET_GPROF=y" >> $config_target_mak > if test "$target_linux_user" = "yes" ; then > cflags="-p $cflags" > ldflags="-p $ldflags" > diff --git a/linux-user/exit.c b/linux-user/exit.c > index a362ef67d2..1594015444 100644 > --- a/linux-user/exit.c > +++ b/linux-user/exit.c > @@ -18,7 +18,7 @@ > */ > #include "qemu/osdep.h" > #include "qemu.h" > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > #include <sys/gmon.h> > #endif > > @@ -28,7 +28,7 @@ extern void __gcov_dump(void); > > void preexit_cleanup(CPUArchState *env, int code) > { > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > _mcleanup(); > #endif > #ifdef CONFIG_GCOV > diff --git a/linux-user/signal.c b/linux-user/signal.c > index 5ca6d62b15..02f860ecb9 100644 > --- a/linux-user/signal.c > +++ b/linux-user/signal.c > @@ -509,7 +509,7 @@ void signal_init(void) > act.sa_flags = SA_SIGINFO; > act.sa_sigaction = host_signal_handler; > for(i = 1; i <= TARGET_NSIG; i++) { > -#ifdef TARGET_GPROF > +#ifdef CONFIG_GPROF > if (i == SIGPROF) { > continue; > } > diff --git a/tests/check-block.sh b/tests/check-block.sh > index 679aedec50..ad320c21ba 100755 > --- a/tests/check-block.sh > +++ b/tests/check-block.sh > @@ -16,7 +16,7 @@ if [ "$#" -ne 0 ]; then > format_list="$@" > fi > > -if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then > +if grep -q "CONFIG_GPROF=y" config-host.mak 2>/dev/null ; then > echo "GPROF is enabled ==> Not running the qemu-iotests." > exit 0 > fi > Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
© 2016 - 2024 Red Hat, Inc.