target-arm queue. The big thing here is the landing of the 3-phase reset patches... -- PMM The following changes since commit 204aa60b37c23a89e690d418f49787d274303ca7: Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jan-29-2020' into staging (2020-01-30 14:18:45 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200130 for you to fetch changes up to dea101a1ae9968c9fec6ab0291489dad7c49f36f: target/arm/cpu: Add the kvm-no-adjvtime CPU property (2020-01-30 16:02:06 +0000) ---------------------------------------------------------------- target-arm queue: * hw/core/or-irq: Fix incorrect assert forbidding num-lines == MAX_OR_LINES * target/arm/arm-semi: Don't let the guest close stdin/stdout/stderr * aspeed: some minor bugfixes * aspeed: add eMMC controller model for AST2600 SoC * hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus' * New 3-phase reset API for device models * hw/intc/arm_gicv3_kvm: Stop wrongly programming GICR_PENDBASER.PTZ bit * Arm KVM: stop/restart the guest counter when the VM is stopped and started ---------------------------------------------------------------- Andrew Jeffery (2): hw/sd: Configure number of slots exposed by the ASPEED SDHCI model hw/arm: ast2600: Wire up the eMMC controller Andrew Jones (6): target/arm/kvm: trivial: Clean up header documentation hw/arm/virt: Add missing 5.0 options call to 4.2 options target/arm/kvm64: kvm64 cpus have timer registers tests/arm-cpu-features: Check feature default values target/arm/kvm: Implement virtual time adjustment target/arm/cpu: Add the kvm-no-adjvtime CPU property Cédric Le Goater (2): ftgmac100: check RX and TX buffer alignment hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0 Damien Hedde (11): add device_legacy_reset function to prepare for reset api change hw/core/qdev: add trace events to help with resettable transition hw/core: create Resettable QOM interface hw/core: add Resettable support to BusClass and DeviceClass hw/core/resettable: add support for changing parent hw/core/qdev: handle parent bus change regarding resettable hw/core/qdev: update hotplug reset regarding resettable hw/core: deprecate old reset functions and introduce new ones docs/devel/reset.rst: add doc about Resettable interface vl: replace deprecated qbus_reset_all registration hw/s390x/ipl: replace deprecated qdev_reset_all registration Joel Stanley (1): misc/pca9552: Add qom set and get Peter Maydell (2): hw/core/or-irq: Fix incorrect assert forbidding num-lines == MAX_OR_LINES target/arm/arm-semi: Don't let the guest close stdin/stdout/stderr Philippe Mathieu-Daudé (1): hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus' Zenghui Yu (1): hw/intc/arm_gicv3_kvm: Stop wrongly programming GICR_PENDBASER.PTZ bit hw/core/Makefile.objs | 1 + tests/Makefile.include | 1 + include/hw/arm/aspeed.h | 2 + include/hw/arm/aspeed_soc.h | 2 + include/hw/arm/virt.h | 1 + include/hw/qdev-core.h | 58 +++++++- include/hw/resettable.h | 247 +++++++++++++++++++++++++++++++++ include/hw/sd/aspeed_sdhci.h | 1 + target/arm/cpu.h | 7 + target/arm/kvm_arm.h | 95 ++++++++++--- hw/arm/aspeed.c | 72 ++++++++-- hw/arm/aspeed_ast2600.c | 31 ++++- hw/arm/aspeed_soc.c | 2 + hw/arm/raspi.c | 2 - hw/arm/virt.c | 9 ++ hw/audio/intel-hda.c | 2 +- hw/core/bus.c | 102 ++++++++++++++ hw/core/or-irq.c | 2 +- hw/core/qdev.c | 160 ++++++++++++++++++++-- hw/core/resettable.c | 301 +++++++++++++++++++++++++++++++++++++++++ hw/hyperv/hyperv.c | 2 +- hw/i386/microvm.c | 2 +- hw/i386/pc.c | 2 +- hw/ide/microdrive.c | 8 +- hw/intc/arm_gicv3_kvm.c | 11 +- hw/intc/spapr_xive.c | 2 +- hw/misc/pca9552.c | 90 ++++++++++++ hw/net/ftgmac100.c | 13 ++ hw/ppc/pnv_psi.c | 4 +- hw/ppc/spapr_pci.c | 2 +- hw/ppc/spapr_vio.c | 2 +- hw/s390x/ipl.c | 10 +- hw/s390x/s390-pci-inst.c | 2 +- hw/scsi/vmw_pvscsi.c | 2 +- hw/sd/aspeed_sdhci.c | 11 +- hw/sd/omap_mmc.c | 2 +- hw/sd/pl181.c | 2 +- target/arm/arm-semi.c | 9 ++ target/arm/cpu.c | 2 + target/arm/cpu64.c | 1 + target/arm/kvm.c | 120 ++++++++++++++++ target/arm/kvm32.c | 3 + target/arm/kvm64.c | 4 + target/arm/machine.c | 7 + target/arm/monitor.c | 1 + tests/qtest/arm-cpu-features.c | 41 ++++-- vl.c | 10 +- docs/arm-cpu-features.rst | 37 ++++- docs/devel/index.rst | 1 + docs/devel/reset.rst | 289 +++++++++++++++++++++++++++++++++++++++ hw/core/trace-events | 27 ++++ 51 files changed, 1727 insertions(+), 90 deletions(-) create mode 100644 include/hw/resettable.h create mode 100644 hw/core/resettable.c create mode 100644 docs/devel/reset.rst The num-lines property of the TYPE_OR_GATE device sets the number of input lines it has. An assert() in or_irq_realize() restricts this to the maximum supported by the implementation. However we got the condition in the assert wrong: it should be using <=, because num-lines == MAX_OR_LINES is permitted, and means that all entries from 0 to MAX_OR_LINES-1 in the s->levels[] array are used. We didn't notice this previously because no user has so far needed that many input lines. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200120142235.10432-1-peter.maydell@linaro.org --- hw/core/or-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/core/or-irq.c b/hw/core/or-irq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/or-irq.c +++ b/hw/core/or-irq.c @@ -XXX,XX +XXX,XX @@ static void or_irq_realize(DeviceState *dev, Error **errp) { qemu_or_irq *s = OR_IRQ(dev); - assert(s->num_lines < MAX_OR_LINES); + assert(s->num_lines <= MAX_OR_LINES); qdev_init_gpio_in(dev, or_irq_handler, s->num_lines); } -- 2.20.1 The guest can use the semihosting API to open a handle corresponding to QEMU's own stdin, stdout, or stderr. When the guest closes this handle, we should not close the underlying host stdin/stdout/stderr the way we would do if the handle corresponded to a host fd we'd opened on behalf of the guest in SYS_OPEN. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200124172954.28481-1-peter.maydell@linaro.org --- target/arm/arm-semi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) { CPUARMState *env = &cpu->env; + /* + * Only close the underlying host fd if it's one we opened on behalf + * of the guest in SYS_OPEN. + */ + if (gf->hostfd == STDIN_FILENO || + gf->hostfd == STDOUT_FILENO || + gf->hostfd == STDERR_FILENO) { + return 0; + } return set_swi_errno(env, close(gf->hostfd)); } -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> The AST2600 includes a second cut-down version of the SD/MMC controller found in the AST2500, named the eMMC controller. It's cut down in the sense that it only supports one slot rather than two, but it brings the total number of slots supported by the AST2600 to three. The existing code assumed that the SD controller always provided two slots. Rework the SDHCI object to expose the number of slots as a property to be set by the SoC configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-2-clg@kaod.org [PMM: fixed up to use device_class_set_props()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/aspeed_sdhci.h | 1 + hw/arm/aspeed.c | 2 +- hw/arm/aspeed_ast2600.c | 2 ++ hw/arm/aspeed_soc.c | 2 ++ hw/sd/aspeed_sdhci.c | 11 +++++++++-- 5 files changed, 15 insertions(+), 3 deletions(-) diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/aspeed_sdhci.h +++ b/include/hw/sd/aspeed_sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDHCIState { SysBusDevice parent; SDHCIState slots[ASPEED_SDHCI_NUM_SLOTS]; + uint8_t num_slots; MemoryRegion iomem; qemu_irq irq; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) amc->i2c_init(bmc); } - for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) { + for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { SDHCIState *sdhci = &bmc->soc.sdhci.slots[i]; DriveInfo *dinfo = drive_get_next(IF_SD); BlockBackend *blk; diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), TYPE_ASPEED_SDHCI); + object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); + /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), TYPE_ASPEED_SDHCI); + object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); + /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/aspeed_sdhci.c +++ b/hw/sd/aspeed_sdhci.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/irq.h" #include "migration/vmstate.h" +#include "hw/qdev-properties.h" #define ASPEED_SDHCI_INFO 0x00 #define ASPEED_SDHCI_INFO_RESET 0x00030000 @@ -XXX,XX +XXX,XX @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp) /* Create input irqs for the slots */ qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq, - sdhci, NULL, ASPEED_SDHCI_NUM_SLOTS); + sdhci, NULL, sdhci->num_slots); sysbus_init_irq(sbd, &sdhci->irq); memory_region_init_io(&sdhci->iomem, OBJECT(sdhci), &aspeed_sdhci_ops, sdhci, TYPE_ASPEED_SDHCI, 0x1000); sysbus_init_mmio(sbd, &sdhci->iomem); - for (int i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { + for (int i = 0; i < sdhci->num_slots; ++i) { Object *sdhci_slot = OBJECT(&sdhci->slots[i]); SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_sdhci = { }, }; +static Property aspeed_sdhci_properties[] = { + DEFINE_PROP_UINT8("num-slots", AspeedSDHCIState, num_slots, 0), + DEFINE_PROP_END_OF_LIST(), +}; + static void aspeed_sdhci_class_init(ObjectClass *classp, void *data) { DeviceClass *dc = DEVICE_CLASS(classp); @@ -XXX,XX +XXX,XX @@ static void aspeed_sdhci_class_init(ObjectClass *classp, void *data) dc->realize = aspeed_sdhci_realize; dc->reset = aspeed_sdhci_reset; dc->vmsd = &vmstate_aspeed_sdhci; + device_class_set_props(dc, aspeed_sdhci_properties); } static TypeInfo aspeed_sdhci_info = { -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 2 ++ hw/arm/aspeed.c | 26 +++++++++++++++++--------- hw/arm/aspeed_ast2600.c | 29 ++++++++++++++++++++++++++--- 3 files changed, 45 insertions(+), 12 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedGPIOState gpio; AspeedGPIOState gpio_1_8v; AspeedSDHCIState sdhci; + AspeedSDHCIState emmc; } AspeedSoCState; #define TYPE_ASPEED_SOC "aspeed-soc" @@ -XXX,XX +XXX,XX @@ enum { ASPEED_MII4, ASPEED_SDRAM, ASPEED_XDMA, + ASPEED_EMMC, }; #endif /* ASPEED_SOC_H */ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } +static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo) +{ + DeviceState *card; + + card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), + TYPE_SD_CARD); + if (dinfo) { + qdev_prop_set_drive(card, "drive", blk_by_legacy_dinfo(dinfo), + &error_fatal); + } + object_property_set_bool(OBJECT(card), true, "realized", &error_fatal); +} + static void aspeed_machine_init(MachineState *machine) { AspeedBoardState *bmc; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) } for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { - SDHCIState *sdhci = &bmc->soc.sdhci.slots[i]; - DriveInfo *dinfo = drive_get_next(IF_SD); - BlockBackend *blk; - DeviceState *card; + sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get_next(IF_SD)); + } - blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL; - card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), - TYPE_SD_CARD); - qdev_prop_set_drive(card, "drive", blk, &error_fatal); - object_property_set_bool(OBJECT(card), true, "realized", &error_fatal); + if (bmc->soc.emmc.num_slots) { + sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get_next(IF_SD)); } arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { [ASPEED_ADC] = 0x1E6E9000, [ASPEED_VIDEO] = 0x1E700000, [ASPEED_SDHCI] = 0x1E740000, + [ASPEED_EMMC] = 0x1E750000, [ASPEED_GPIO] = 0x1E780000, [ASPEED_GPIO_1_8V] = 0x1E780800, [ASPEED_RTC] = 0x1E781000, @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { #define ASPEED_SOC_AST2600_MAX_IRQ 128 +/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */ static const int aspeed_soc_ast2600_irqmap[] = { [ASPEED_UART1] = 47, [ASPEED_UART2] = 48, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2600_irqmap[] = { [ASPEED_ADC] = 78, [ASPEED_XDMA] = 6, [ASPEED_SDHCI] = 43, + [ASPEED_EMMC] = 15, [ASPEED_GPIO] = 40, [ASPEED_GPIO_1_8V] = 11, [ASPEED_RTC] = 13, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) sysbus_init_child_obj(obj, "gpio_1_8v", OBJECT(&s->gpio_1_8v), sizeof(s->gpio_1_8v), typename); - sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), - TYPE_ASPEED_SDHCI); + sysbus_init_child_obj(obj, "sd-controller", OBJECT(&s->sdhci), + sizeof(s->sdhci), TYPE_ASPEED_SDHCI); object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { - sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), + sysbus_init_child_obj(obj, "sd-controller.sdhci[*]", + OBJECT(&s->sdhci.slots[i]), sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI); } + + sysbus_init_child_obj(obj, "emmc-controller", OBJECT(&s->emmc), + sizeof(s->emmc), TYPE_ASPEED_SDHCI); + + object_property_set_int(OBJECT(&s->emmc), 1, "num-slots", &error_abort); + + sysbus_init_child_obj(obj, "emmc-controller.sdhci", + OBJECT(&s->emmc.slots[0]), sizeof(s->emmc.slots[0]), + TYPE_SYSBUS_SDHCI); } /* @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) sc->memmap[ASPEED_SDHCI]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, aspeed_soc_get_irq(s, ASPEED_SDHCI)); + + /* eMMC */ + object_property_set_bool(OBJECT(&s->emmc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_EMMC]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0, + aspeed_soc_get_irq(s, ASPEED_EMMC)); } static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> These buffers should be aligned on 16 bytes. Ignore invalid RX and TX buffer addresses and log an error. All incoming and outgoing traffic will be dropped because no valid RX or TX descriptors will be available. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-4-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t des3; } FTGMAC100Desc; +#define FTGMAC100_DESC_ALIGNMENT 16 + /* * Specific RTL8211E MII Registers */ @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, s->itc = value; break; case FTGMAC100_RXR_BADR: /* Ring buffer address */ + if (!QEMU_IS_ALIGNED(value, FTGMAC100_DESC_ALIGNMENT)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad RX buffer alignment 0x%" + HWADDR_PRIx "\n", __func__, value); + return; + } + s->rx_ring = value; s->rx_descriptor = s->rx_ring; break; @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, break; case FTGMAC100_NPTXR_BADR: /* Transmit buffer address */ + if (!QEMU_IS_ALIGNED(value, FTGMAC100_DESC_ALIGNMENT)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad TX buffer alignment 0x%" + HWADDR_PRIx "\n", __func__, value); + return; + } s->tx_ring = value; s->tx_descriptor = s->tx_ring; break; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The overhead for the OpenBMC firmware images using the a custom U-Boot is around 2 seconds, which is fine, but with a U-Boot from mainline, it takes an extra 50 seconds or so to reach Linux. A quick survey on the number of reads performed on the flash memory region gives the following figures : OpenBMC U-Boot 922478 (~ 3.5 MBytes) Mainline U-Boot 20569977 (~ 80 MBytes) QEMU must be trashing the TCG TBs and reloading text very often. Some addresses are read more than 250.000 times. Until we find a solution to improve boot time, execution from MMIO is not activated by default. Setting this option also breaks migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200114103433.30534-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed.h | 2 ++ hw/arm/aspeed.c | 44 ++++++++++++++++++++++++++++++++++++----- 2 files changed, 41 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardState AspeedBoardState; typedef struct AspeedMachine { MachineState parent_obj; + + bool mmio_exec; } AspeedMachine; #define ASPEED_MACHINE_CLASS(klass) \ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) * SoC and 128MB for the AST2500 SoC, which is twice as big as * needed by the flash modules of the Aspeed machines. */ - memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom", - fl->size, &error_abort); - memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, - boot_rom); - write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort); + if (ASPEED_MACHINE(machine)->mmio_exec) { + memory_region_init_alias(boot_rom, OBJECT(bmc), "aspeed.boot_rom", + &fl->mmio, 0, fl->size); + memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, + boot_rom); + } else { + memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom", + fl->size, &error_abort); + memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, + boot_rom); + write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort); + } } aspeed_board_binfo.ram_size = ram_size; @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) /* Bus 11: TODO ucd90160@64 */ } +static bool aspeed_get_mmio_exec(Object *obj, Error **errp) +{ + return ASPEED_MACHINE(obj)->mmio_exec; +} + +static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp) +{ + ASPEED_MACHINE(obj)->mmio_exec = value; +} + +static void aspeed_machine_instance_init(Object *obj) +{ + ASPEED_MACHINE(obj)->mmio_exec = false; +} + +static void aspeed_machine_class_props_init(ObjectClass *oc) +{ + object_class_property_add_bool(oc, "execute-in-place", + aspeed_get_mmio_exec, + aspeed_set_mmio_exec, &error_abort); + object_class_property_set_description(oc, "execute-in-place", + "boot directly from CE0 flash device", &error_abort); +} + static void aspeed_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; + + aspeed_machine_class_props_init(oc); } static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data) @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = TYPE_ASPEED_MACHINE, .parent = TYPE_MACHINE, .instance_size = sizeof(AspeedMachine), + .instance_init = aspeed_machine_instance_init, .class_size = sizeof(AspeedMachineClass), .class_init = aspeed_machine_class_init, .abstract = true, -- 2.20.1 From: Joel Stanley <joel@jms.id.au> Following the pattern of the work recently done with the ASPEED GPIO model, this adds support for inspecting and modifying the PCA9552 LEDs from the monitor. (qemu) qom-set /machine/unattached/device[17] led0 on (qemu) qom-set /machine/unattached/device[17] led0 off (qemu) qom-set /machine/unattached/device[17] led0 pwm0 (qemu) qom-set /machine/unattached/device[17] led0 pwm1 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-6-clg@kaod.org [clg: - removed the "qom-get" examples from the commit log - merged memory leak fixes from Joel ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/pca9552.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pca9552.c +++ b/hw/misc/pca9552.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pca9552.h" #include "hw/misc/pca9552_regs.h" #include "migration/vmstate.h" +#include "qapi/error.h" +#include "qapi/visitor.h" #define PCA9552_LED_ON 0x0 #define PCA9552_LED_OFF 0x1 #define PCA9552_LED_PWM0 0x2 #define PCA9552_LED_PWM1 0x3 +static const char *led_state[] = {"on", "off", "pwm0", "pwm1"}; + static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin) { uint8_t reg = PCA9552_LS0 + (pin / 4); @@ -XXX,XX +XXX,XX @@ static int pca9552_event(I2CSlave *i2c, enum i2c_event event) return 0; } +static void pca9552_get_led(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + PCA9552State *s = PCA9552(obj); + int led, rc, reg; + uint8_t state; + + rc = sscanf(name, "led%2d", &led); + if (rc != 1) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } + if (led < 0 || led > s->nr_leds) { + error_setg(errp, "%s invalid led %s", __func__, name); + return; + } + /* + * Get the LSx register as the qom interface should expose the device + * state, not the modeled 'input line' behaviour which would come from + * reading the INPUTx reg + */ + reg = PCA9552_LS0 + led / 4; + state = (pca9552_read(s, reg) >> (led % 8)) & 0x3; + visit_type_str(v, name, (char **)&led_state[state], errp); +} + +/* + * Return an LED selector register value based on an existing one, with + * the appropriate 2-bit state value set for the given LED number (0-3). + */ +static inline uint8_t pca955x_ledsel(uint8_t oldval, int led_num, int state) +{ + return (oldval & (~(0x3 << (led_num << 1)))) | + ((state & 0x3) << (led_num << 1)); +} + +static void pca9552_set_led(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + PCA9552State *s = PCA9552(obj); + Error *local_err = NULL; + int led, rc, reg, val; + uint8_t state; + char *state_str; + + visit_type_str(v, name, &state_str, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + rc = sscanf(name, "led%2d", &led); + if (rc != 1) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } + if (led < 0 || led > s->nr_leds) { + error_setg(errp, "%s invalid led %s", __func__, name); + return; + } + + for (state = 0; state < ARRAY_SIZE(led_state); state++) { + if (!strcmp(state_str, led_state[state])) { + break; + } + } + if (state >= ARRAY_SIZE(led_state)) { + error_setg(errp, "%s invalid led state %s", __func__, state_str); + return; + } + + reg = PCA9552_LS0 + led / 4; + val = pca9552_read(s, reg); + val = pca955x_ledsel(val, led % 4, state); + pca9552_write(s, reg, val); +} + static const VMStateDescription pca9552_vmstate = { .name = "PCA9552", .version_id = 0, @@ -XXX,XX +XXX,XX @@ static void pca9552_reset(DeviceState *dev) static void pca9552_initfn(Object *obj) { PCA9552State *s = PCA9552(obj); + int led; /* If support for the other PCA955X devices are implemented, these * constant values might be part of class structure describing the @@ -XXX,XX +XXX,XX @@ static void pca9552_initfn(Object *obj) */ s->max_reg = PCA9552_LS3; s->nr_leds = 16; + + for (led = 0; led < s->nr_leds; led++) { + char *name; + + name = g_strdup_printf("led%d", led); + object_property_add(obj, name, "bool", pca9552_get_led, pca9552_set_led, + NULL, NULL, NULL); + g_free(name); + } } static void pca9552_class_init(ObjectClass *klass, void *data) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Since we enabled parallel TCG code generation for softmmu (see commit 3468b59 "tcg: enable multiple TCG contexts in softmmu") and its subsequent fix (commit 72649619 "add .min_cpus and .default_cpus fields to machine_class"), the raspi machines are restricted to always use their 4 cores: See in hw/arm/raspi2 (with BCM283X_NCPUS set to 4): 222 static void raspi2_machine_init(MachineClass *mc) 223 { 224 mc->desc = "Raspberry Pi 2"; 230 mc->max_cpus = BCM283X_NCPUS; 231 mc->min_cpus = BCM283X_NCPUS; 232 mc->default_cpus = BCM283X_NCPUS; 235 }; 236 DEFINE_MACHINE("raspi2", raspi2_machine_init) We can no longer use the -smp option, as we get: $ qemu-system-arm -M raspi2 -smp 1 qemu-system-arm: Invalid SMP CPUs 1. The min CPUs supported by machine 'raspi2' is 4 Since we can not set the TYPE_BCM283x SOC "enabled-cpus" with -smp, remove the unuseful code. We can achieve the same by using the '-global bcm2836.enabled-cpus=1' option. Reported-by: Laurent Bonnans <laurent.bonnans@here.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200120235159.18510-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) /* Setup the SOC */ object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram), &error_abort); - object_property_set_int(OBJECT(&s->soc), machine->smp.cpus, "enabled-cpus", - &error_abort); int board_rev = version == 3 ? 0xa02082 : 0xa21041; object_property_set_int(OBJECT(&s->soc), board_rev, "board-rev", &error_abort); -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Provide a temporary device_legacy_reset function doing what device_reset does to prepare for the transition with Resettable API. All occurrence of device_reset in the code tree are also replaced by device_legacy_reset. The new resettable API has different prototype and semantics (resetting child buses as well as the specified device). Subsequent commits will make the changeover for each call site individually; once that is complete device_legacy_reset() will be removed. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-core.h | 4 ++-- hw/audio/intel-hda.c | 2 +- hw/core/qdev.c | 6 +++--- hw/hyperv/hyperv.c | 2 +- hw/i386/microvm.c | 2 +- hw/i386/pc.c | 2 +- hw/ide/microdrive.c | 8 ++++---- hw/intc/spapr_xive.c | 2 +- hw/ppc/pnv_psi.c | 4 ++-- hw/ppc/spapr_pci.c | 2 +- hw/ppc/spapr_vio.c | 2 +- hw/s390x/s390-pci-inst.c | 2 +- hw/scsi/vmw_pvscsi.c | 2 +- hw/sd/omap_mmc.c | 2 +- hw/sd/pl181.c | 2 +- 15 files changed, 22 insertions(+), 22 deletions(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ char *qdev_get_own_fw_dev_path_from_handler(BusState *bus, DeviceState *dev); void qdev_machine_init(void); /** - * @device_reset + * device_legacy_reset: * * Reset a single device (by calling the reset method). */ -void device_reset(DeviceState *dev); +void device_legacy_reset(DeviceState *dev); void device_class_set_props(DeviceClass *dc, Property *props); diff --git a/hw/audio/intel-hda.c b/hw/audio/intel-hda.c index XXXXXXX..XXXXXXX 100644 --- a/hw/audio/intel-hda.c +++ b/hw/audio/intel-hda.c @@ -XXX,XX +XXX,XX @@ static void intel_hda_reset(DeviceState *dev) QTAILQ_FOREACH(kid, &d->codecs.qbus.children, sibling) { DeviceState *qdev = kid->child; cdev = HDA_CODEC_DEVICE(qdev); - device_reset(DEVICE(cdev)); + device_legacy_reset(DEVICE(cdev)); d->state_sts |= (1 << cdev->cad); } intel_hda_update_irq(d); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev) static int qdev_reset_one(DeviceState *dev, void *opaque) { - device_reset(dev); + device_legacy_reset(dev); return 0; } @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } if (dev->hotplugged) { - device_reset(dev); + device_legacy_reset(dev); } dev->pending_deleted_event = false; @@ -XXX,XX +XXX,XX @@ void device_class_set_parent_unrealize(DeviceClass *dc, dc->unrealize = dev_unrealize; } -void device_reset(DeviceState *dev) +void device_legacy_reset(DeviceState *dev) { DeviceClass *klass = DEVICE_GET_CLASS(dev); diff --git a/hw/hyperv/hyperv.c b/hw/hyperv/hyperv.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hyperv/hyperv.c +++ b/hw/hyperv/hyperv.c @@ -XXX,XX +XXX,XX @@ void hyperv_synic_reset(CPUState *cs) SynICState *synic = get_synic(cs); if (synic) { - device_reset(DEVICE(synic)); + device_legacy_reset(DEVICE(synic)); } } diff --git a/hw/i386/microvm.c b/hw/i386/microvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/microvm.c +++ b/hw/i386/microvm.c @@ -XXX,XX +XXX,XX @@ static void microvm_machine_reset(MachineState *machine) cpu = X86_CPU(cs); if (cpu->apic_state) { - device_reset(cpu->apic_state); + device_legacy_reset(cpu->apic_state); } } } diff --git a/hw/i386/pc.c b/hw/i386/pc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc.c +++ b/hw/i386/pc.c @@ -XXX,XX +XXX,XX @@ static void pc_machine_reset(MachineState *machine) cpu = X86_CPU(cs); if (cpu->apic_state) { - device_reset(cpu->apic_state); + device_legacy_reset(cpu->apic_state); } } } diff --git a/hw/ide/microdrive.c b/hw/ide/microdrive.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/microdrive.c +++ b/hw/ide/microdrive.c @@ -XXX,XX +XXX,XX @@ static void md_attr_write(PCMCIACardState *card, uint32_t at, uint8_t value) case 0x00: /* Configuration Option Register */ s->opt = value & 0xcf; if (value & OPT_SRESET) { - device_reset(DEVICE(s)); + device_legacy_reset(DEVICE(s)); } md_interrupt_update(s); break; @@ -XXX,XX +XXX,XX @@ static void md_common_write(PCMCIACardState *card, uint32_t at, uint16_t value) case 0xe: /* Device Control */ s->ctrl = value; if (value & CTRL_SRST) { - device_reset(DEVICE(s)); + device_legacy_reset(DEVICE(s)); } md_interrupt_update(s); break; @@ -XXX,XX +XXX,XX @@ static int dscm1xxxx_attach(PCMCIACardState *card) md->attr_base = pcc->cis[0x74] | (pcc->cis[0x76] << 8); md->io_base = 0x0; - device_reset(DEVICE(md)); + device_legacy_reset(DEVICE(md)); md_interrupt_update(md); return 0; @@ -XXX,XX +XXX,XX @@ static int dscm1xxxx_detach(PCMCIACardState *card) { MicroDriveState *md = MICRODRIVE(card); - device_reset(DEVICE(md)); + device_legacy_reset(DEVICE(md)); return 0; } diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/spapr_xive.c +++ b/hw/intc/spapr_xive.c @@ -XXX,XX +XXX,XX @@ static target_ulong h_int_reset(PowerPCCPU *cpu, return H_PARAMETER; } - device_reset(DEVICE(xive)); + device_legacy_reset(DEVICE(xive)); if (kvm_irqchip_in_kernel()) { Error *local_err = NULL; diff --git a/hw/ppc/pnv_psi.c b/hw/ppc/pnv_psi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv_psi.c +++ b/hw/ppc/pnv_psi.c @@ -XXX,XX +XXX,XX @@ static void pnv_psi_reset(DeviceState *dev) static void pnv_psi_reset_handler(void *dev) { - device_reset(DEVICE(dev)); + device_legacy_reset(DEVICE(dev)); } static void pnv_psi_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void pnv_psi_p9_mmio_write(void *opaque, hwaddr addr, break; case PSIHB9_INTERRUPT_CONTROL: if (val & PSIHB9_IRQ_RESET) { - device_reset(DEVICE(&psi9->source)); + device_legacy_reset(DEVICE(&psi9->source)); } psi->regs[reg] = val; break; diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr_pci.c +++ b/hw/ppc/spapr_pci.c @@ -XXX,XX +XXX,XX @@ static int spapr_phb_children_reset(Object *child, void *opaque) DeviceState *dev = (DeviceState *) object_dynamic_cast(child, TYPE_DEVICE); if (dev) { - device_reset(dev); + device_legacy_reset(dev); } return 0; diff --git a/hw/ppc/spapr_vio.c b/hw/ppc/spapr_vio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr_vio.c +++ b/hw/ppc/spapr_vio.c @@ -XXX,XX +XXX,XX @@ int spapr_vio_send_crq(SpaprVioDevice *dev, uint8_t *crq) static void spapr_vio_quiesce_one(SpaprVioDevice *dev) { if (dev->tcet) { - device_reset(DEVICE(dev->tcet)); + device_legacy_reset(DEVICE(dev->tcet)); } free_crq(dev); } diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra) stw_p(&ressetpci->hdr.rsp, CLP_RC_SETPCIFN_FHOP); goto out; } - device_reset(DEVICE(pbdev)); + device_legacy_reset(DEVICE(pbdev)); pbdev->fh &= ~FH_MASK_ENABLE; pbdev->state = ZPCI_FS_DISABLED; stl_p(&ressetpci->fh, pbdev->fh); diff --git a/hw/scsi/vmw_pvscsi.c b/hw/scsi/vmw_pvscsi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/vmw_pvscsi.c +++ b/hw/scsi/vmw_pvscsi.c @@ -XXX,XX +XXX,XX @@ pvscsi_on_cmd_reset_device(PVSCSIState *s) if (sdev != NULL) { s->resetting++; - device_reset(&sdev->qdev); + device_legacy_reset(&sdev->qdev); s->resetting--; return PVSCSI_COMMAND_PROCESSING_SUCCEEDED; } diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ void omap_mmc_reset(struct omap_mmc_s *host) * into any bus, and we must reset it manually. When omap_mmc is * QOMified this must move into the QOM reset function. */ - device_reset(DEVICE(host->card)); + device_legacy_reset(DEVICE(host->card)); } static uint64_t omap_mmc_read(void *opaque, hwaddr offset, diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/pl181.c +++ b/hw/sd/pl181.c @@ -XXX,XX +XXX,XX @@ static void pl181_reset(DeviceState *d) /* Since we're still using the legacy SD API the card is not plugged * into any bus, and we must reset it manually. */ - device_reset(DEVICE(s->card)); + device_legacy_reset(DEVICE(s->card)); } static void pl181_init(Object *obj) -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Adds trace events to reset procedure and when updating the parent bus of a device. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-3-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/qdev.c | 29 ++++++++++++++++++++++++++--- hw/core/trace-events | 9 +++++++++ 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/sysbus.h" #include "migration/vmstate.h" +#include "trace.h" bool qdev_hotplug = false; static bool qdev_hot_added = false; @@ -XXX,XX +XXX,XX @@ void qdev_set_parent_bus(DeviceState *dev, BusState *bus) bool replugging = dev->parent_bus != NULL; if (replugging) { - /* Keep a reference to the device while it's not plugged into + trace_qdev_update_parent_bus(dev, object_get_typename(OBJECT(dev)), + dev->parent_bus, object_get_typename(OBJECT(dev->parent_bus)), + OBJECT(bus), object_get_typename(OBJECT(bus))); + /* + * Keep a reference to the device while it's not plugged into * any bus, to avoid it potentially evaporating when it is * dereffed in bus_remove_child(). */ @@ -XXX,XX +XXX,XX @@ HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev) return hotplug_ctrl; } +static int qdev_prereset(DeviceState *dev, void *opaque) +{ + trace_qdev_reset_tree(dev, object_get_typename(OBJECT(dev))); + return 0; +} + +static int qbus_prereset(BusState *bus, void *opaque) +{ + trace_qbus_reset_tree(bus, object_get_typename(OBJECT(bus))); + return 0; +} + static int qdev_reset_one(DeviceState *dev, void *opaque) { device_legacy_reset(dev); @@ -XXX,XX +XXX,XX @@ static int qdev_reset_one(DeviceState *dev, void *opaque) static int qbus_reset_one(BusState *bus, void *opaque) { BusClass *bc = BUS_GET_CLASS(bus); + trace_qbus_reset(bus, object_get_typename(OBJECT(bus))); if (bc->reset) { bc->reset(bus); } @@ -XXX,XX +XXX,XX @@ static int qbus_reset_one(BusState *bus, void *opaque) void qdev_reset_all(DeviceState *dev) { - qdev_walk_children(dev, NULL, NULL, qdev_reset_one, qbus_reset_one, NULL); + trace_qdev_reset_all(dev, object_get_typename(OBJECT(dev))); + qdev_walk_children(dev, qdev_prereset, qbus_prereset, + qdev_reset_one, qbus_reset_one, NULL); } void qdev_reset_all_fn(void *opaque) @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque) void qbus_reset_all(BusState *bus) { - qbus_walk_children(bus, NULL, NULL, qdev_reset_one, qbus_reset_one, NULL); + trace_qbus_reset_all(bus, object_get_typename(OBJECT(bus))); + qbus_walk_children(bus, qdev_prereset, qbus_prereset, + qdev_reset_one, qbus_reset_one, NULL); } void qbus_reset_all_fn(void *opaque) @@ -XXX,XX +XXX,XX @@ void device_legacy_reset(DeviceState *dev) { DeviceClass *klass = DEVICE_GET_CLASS(dev); + trace_qdev_reset(dev, object_get_typename(OBJECT(dev))); if (klass->reset) { klass->reset(dev); } diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ # loader.c loader_write_rom(const char *name, uint64_t gpa, uint64_t size, bool isrom) "%s: @0x%"PRIx64" size=0x%"PRIx64" ROM=%d" + +# qdev.c +qdev_reset(void *obj, const char *objtype) "obj=%p(%s)" +qdev_reset_all(void *obj, const char *objtype) "obj=%p(%s)" +qdev_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset_all(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" +qdev_update_parent_bus(void *obj, const char *objtype, void *oldp, const char *oldptype, void *newp, const char *newptype) "obj=%p(%s) old_parent=%p(%s) new_parent=%p(%s)" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit defines an interface allowing multi-phase reset. This aims to solve a problem of the actual single-phase reset (built in DeviceClass and BusClass): reset behavior is dependent on the order in which reset handlers are called. In particular doing external side-effect (like setting an qemu_irq) is problematic because receiving object may not be reset yet. The Resettable interface divides the reset in 3 well defined phases. To reset an object tree, all 1st phases are executed then all 2nd then all 3rd. See the comments in include/hw/resettable.h for a more complete description. The interface defines 3 phases to let the future possibility of holding an object into reset for some time. The qdev/qbus reset in DeviceClass and BusClass will be modified in following commits to use this interface. A mechanism is provided to allow executing a transitional reset handler in place of the 2nd phase which is executed in children-then-parent order inside a tree. This will allow to transition devices and buses smoothly while keeping the exact current qdev/qbus reset behavior for now. Documentation will be added in a following commit. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-4-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/Makefile.objs | 1 + include/hw/resettable.h | 211 +++++++++++++++++++++++++++++++++++ hw/core/resettable.c | 238 ++++++++++++++++++++++++++++++++++++++++ hw/core/trace-events | 17 +++ 4 files changed, 467 insertions(+) create mode 100644 include/hw/resettable.h create mode 100644 hw/core/resettable.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-y += qdev.o qdev-properties.o common-obj-y += bus.o common-obj-y += cpu.o +common-obj-y += resettable.o common-obj-y += hotplug.o common-obj-y += vmstate-if.o # irq.o needed for qdev GPIO handling: diff --git a/include/hw/resettable.h b/include/hw/resettable.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ +/* + * Resettable interface header. + * + * Copyright (c) 2019 GreenSocs SAS + * + * Authors: + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_RESETTABLE_H +#define HW_RESETTABLE_H + +#include "qom/object.h" + +#define TYPE_RESETTABLE_INTERFACE "resettable" + +#define RESETTABLE_CLASS(class) \ + OBJECT_CLASS_CHECK(ResettableClass, (class), TYPE_RESETTABLE_INTERFACE) + +#define RESETTABLE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(ResettableClass, (obj), TYPE_RESETTABLE_INTERFACE) + +typedef struct ResettableState ResettableState; + +/** + * ResetType: + * Types of reset. + * + * + Cold: reset resulting from a power cycle of the object. + * + * TODO: Support has to be added to handle more types. In particular, + * ResettableState structure needs to be expanded. + */ +typedef enum ResetType { + RESET_TYPE_COLD, +} ResetType; + +/* + * ResettableClass: + * Interface for resettable objects. + * + * See docs/devel/reset.rst for more detailed information about how QEMU models + * reset. This whole API must only be used when holding the iothread mutex. + * + * All objects which can be reset must implement this interface; + * it is usually provided by a base class such as DeviceClass or BusClass. + * Every Resettable object must maintain some state tracking the + * progress of a reset operation by providing a ResettableState structure. + * The functions defined in this module take care of updating the + * state of the reset. + * The base class implementation of the interface provides this + * state and implements the associated method: get_state. + * + * Concrete object implementations (typically specific devices + * such as a UART model) should provide the functions + * for the phases.enter, phases.hold and phases.exit methods, which + * they can set in their class init function, either directly or + * by calling resettable_class_set_parent_phases(). + * The phase methods are guaranteed to only only ever be called once + * for any reset event, in the order 'enter', 'hold', 'exit'. + * An object will always move quickly from 'enter' to 'hold' + * but might remain in 'hold' for an arbitrary period of time + * before eventually reset is deasserted and the 'exit' phase is called. + * Object implementations should be prepared for functions handling + * inbound connections from other devices (such as qemu_irq handler + * functions) to be called at any point during reset after their + * 'enter' method has been called. + * + * Users of a resettable object should not call these methods + * directly, but instead use the function resettable_reset(). + * + * @phases.enter: This phase is called when the object enters reset. It + * should reset local state of the object, but it must not do anything that + * has a side-effect on other objects, such as raising or lowering a qemu_irq + * line or reading or writing guest memory. It takes the reset's type as + * argument. + * + * @phases.hold: This phase is called for entry into reset, once every object + * in the system which is being reset has had its @phases.enter method called. + * At this point devices can do actions that affect other objects. + * + * @phases.exit: This phase is called when the object leaves the reset state. + * Actions affecting other objects are permitted. + * + * @get_state: Mandatory method which must return a pointer to a + * ResettableState. + * + * @get_transitional_function: transitional method to handle Resettable objects + * not yet fully moved to this interface. It will be removed as soon as it is + * not needed anymore. This method is optional and may return a pointer to a + * function to be used instead of the phases. If the method exists and returns + * a non-NULL function pointer then that function is executed as a replacement + * of the 'hold' phase method taking the object as argument. The two other phase + * methods are not executed. + * + * @child_foreach: Executes a given callback on every Resettable child. Child + * in this context means a child in the qbus tree, so the children of a qbus + * are the devices on it, and the children of a device are all the buses it + * owns. This is not the same as the QOM object hierarchy. The function takes + * additional opaque and ResetType arguments which must be passed unmodified to + * the callback. + */ +typedef void (*ResettableEnterPhase)(Object *obj, ResetType type); +typedef void (*ResettableHoldPhase)(Object *obj); +typedef void (*ResettableExitPhase)(Object *obj); +typedef ResettableState * (*ResettableGetState)(Object *obj); +typedef void (*ResettableTrFunction)(Object *obj); +typedef ResettableTrFunction (*ResettableGetTrFunction)(Object *obj); +typedef void (*ResettableChildCallback)(Object *, void *opaque, + ResetType type); +typedef void (*ResettableChildForeach)(Object *obj, + ResettableChildCallback cb, + void *opaque, ResetType type); +typedef struct ResettablePhases { + ResettableEnterPhase enter; + ResettableHoldPhase hold; + ResettableExitPhase exit; +} ResettablePhases; +typedef struct ResettableClass { + InterfaceClass parent_class; + + /* Phase methods */ + ResettablePhases phases; + + /* State access method */ + ResettableGetState get_state; + + /* Transitional method for legacy reset compatibility */ + ResettableGetTrFunction get_transitional_function; + + /* Hierarchy handling method */ + ResettableChildForeach child_foreach; +} ResettableClass; + +/** + * ResettableState: + * Structure holding reset related state. The fields should not be accessed + * directly; the definition is here to allow further inclusion into other + * objects. + * + * @count: Number of reset level the object is into. It is incremented when + * the reset operation starts and decremented when it finishes. + * @hold_phase_pending: flag which indicates that we need to invoke the 'hold' + * phase handler for this object. + * @exit_phase_in_progress: true if we are currently in the exit phase + */ +struct ResettableState { + unsigned count; + bool hold_phase_pending; + bool exit_phase_in_progress; +}; + +/** + * resettable_reset: + * Trigger a reset on an object @obj of type @type. @obj must implement + * Resettable interface. + * + * Calling this function is equivalent to calling @resettable_assert_reset() + * then @resettable_release_reset(). + */ +void resettable_reset(Object *obj, ResetType type); + +/** + * resettable_assert_reset: + * Put an object @obj into reset. @obj must implement Resettable interface. + * + * @resettable_release_reset() must eventually be called after this call. + * There must be one call to @resettable_release_reset() per call of + * @resettable_assert_reset(), with the same type argument. + * + * NOTE: Until support for migration is added, the @resettable_release_reset() + * must not be delayed. It must occur just after @resettable_assert_reset() so + * that migration cannot be triggered in between. Prefer using + * @resettable_reset() for now. + */ +void resettable_assert_reset(Object *obj, ResetType type); + +/** + * resettable_release_reset: + * Release the object @obj from reset. @obj must implement Resettable interface. + * + * See @resettable_assert_reset() description for details. + */ +void resettable_release_reset(Object *obj, ResetType type); + +/** + * resettable_is_in_reset: + * Return true if @obj is under reset. + * + * @obj must implement Resettable interface. + */ +bool resettable_is_in_reset(Object *obj); + +/** + * resettable_class_set_parent_phases: + * + * Save @rc current reset phases into @parent_phases and override @rc phases + * by the given new methods (@enter, @hold and @exit). + * Each phase is overridden only if the new one is not NULL allowing to + * override a subset of phases. + */ +void resettable_class_set_parent_phases(ResettableClass *rc, + ResettableEnterPhase enter, + ResettableHoldPhase hold, + ResettableExitPhase exit, + ResettablePhases *parent_phases); + +#endif diff --git a/hw/core/resettable.c b/hw/core/resettable.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ +/* + * Resettable interface. + * + * Copyright (c) 2019 GreenSocs SAS + * + * Authors: + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/module.h" +#include "hw/resettable.h" +#include "trace.h" + +/** + * resettable_phase_enter/hold/exit: + * Function executing a phase recursively in a resettable object and its + * children. + */ +static void resettable_phase_enter(Object *obj, void *opaque, ResetType type); +static void resettable_phase_hold(Object *obj, void *opaque, ResetType type); +static void resettable_phase_exit(Object *obj, void *opaque, ResetType type); + +/** + * enter_phase_in_progress: + * True if we are currently in reset enter phase. + * + * Note: This flag is only used to guarantee (using asserts) that the reset + * API is used correctly. We can use a global variable because we rely on the + * iothread mutex to ensure only one reset operation is in a progress at a + * given time. + */ +static bool enter_phase_in_progress; + +void resettable_reset(Object *obj, ResetType type) +{ + trace_resettable_reset(obj, type); + resettable_assert_reset(obj, type); + resettable_release_reset(obj, type); +} + +void resettable_assert_reset(Object *obj, ResetType type) +{ + /* TODO: change this assert when adding support for other reset types */ + assert(type == RESET_TYPE_COLD); + trace_resettable_reset_assert_begin(obj, type); + assert(!enter_phase_in_progress); + + enter_phase_in_progress = true; + resettable_phase_enter(obj, NULL, type); + enter_phase_in_progress = false; + + resettable_phase_hold(obj, NULL, type); + + trace_resettable_reset_assert_end(obj); +} + +void resettable_release_reset(Object *obj, ResetType type) +{ + /* TODO: change this assert when adding support for other reset types */ + assert(type == RESET_TYPE_COLD); + trace_resettable_reset_release_begin(obj, type); + assert(!enter_phase_in_progress); + + resettable_phase_exit(obj, NULL, type); + + trace_resettable_reset_release_end(obj); +} + +bool resettable_is_in_reset(Object *obj) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + + return s->count > 0; +} + +/** + * resettable_child_foreach: + * helper to avoid checking the existence of the method. + */ +static void resettable_child_foreach(ResettableClass *rc, Object *obj, + ResettableChildCallback cb, + void *opaque, ResetType type) +{ + if (rc->child_foreach) { + rc->child_foreach(obj, cb, opaque, type); + } +} + +/** + * resettable_get_tr_func: + * helper to fetch transitional reset callback if any. + */ +static ResettableTrFunction resettable_get_tr_func(ResettableClass *rc, + Object *obj) +{ + ResettableTrFunction tr_func = NULL; + if (rc->get_transitional_function) { + tr_func = rc->get_transitional_function(obj); + } + return tr_func; +} + +static void resettable_phase_enter(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + bool action_needed = false; + + /* exit phase has to finish properly before entering back in reset */ + assert(!s->exit_phase_in_progress); + + trace_resettable_phase_enter_begin(obj, obj_typename, s->count, type); + + /* Only take action if we really enter reset for the 1st time. */ + /* + * TODO: if adding more ResetType support, some additional checks + * are probably needed here. + */ + if (s->count++ == 0) { + action_needed = true; + } + /* + * We limit the count to an arbitrary "big" value. The value is big + * enough not to be triggered normally. + * The assert will stop an infinite loop if there is a cycle in the + * reset tree. The loop goes through resettable_foreach_child below + * which at some point will call us again. + */ + assert(s->count <= 50); + + /* + * handle the children even if action_needed is at false so that + * child counts are incremented too + */ + resettable_child_foreach(rc, obj, resettable_phase_enter, NULL, type); + + /* execute enter phase for the object if needed */ + if (action_needed) { + trace_resettable_phase_enter_exec(obj, obj_typename, type, + !!rc->phases.enter); + if (rc->phases.enter && !resettable_get_tr_func(rc, obj)) { + rc->phases.enter(obj, type); + } + s->hold_phase_pending = true; + } + trace_resettable_phase_enter_end(obj, obj_typename, s->count); +} + +static void resettable_phase_hold(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + + /* exit phase has to finish properly before entering back in reset */ + assert(!s->exit_phase_in_progress); + + trace_resettable_phase_hold_begin(obj, obj_typename, s->count, type); + + /* handle children first */ + resettable_child_foreach(rc, obj, resettable_phase_hold, NULL, type); + + /* exec hold phase */ + if (s->hold_phase_pending) { + s->hold_phase_pending = false; + ResettableTrFunction tr_func = resettable_get_tr_func(rc, obj); + trace_resettable_phase_hold_exec(obj, obj_typename, !!rc->phases.hold); + if (tr_func) { + trace_resettable_transitional_function(obj, obj_typename); + tr_func(obj); + } else if (rc->phases.hold) { + rc->phases.hold(obj); + } + } + trace_resettable_phase_hold_end(obj, obj_typename, s->count); +} + +static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + + assert(!s->exit_phase_in_progress); + trace_resettable_phase_exit_begin(obj, obj_typename, s->count, type); + + /* exit_phase_in_progress ensures this phase is 'atomic' */ + s->exit_phase_in_progress = true; + resettable_child_foreach(rc, obj, resettable_phase_exit, NULL, type); + + assert(s->count > 0); + if (s->count == 1) { + trace_resettable_phase_exit_exec(obj, obj_typename, !!rc->phases.exit); + if (rc->phases.exit && !resettable_get_tr_func(rc, obj)) { + rc->phases.exit(obj); + } + s->count = 0; + } + s->exit_phase_in_progress = false; + trace_resettable_phase_exit_end(obj, obj_typename, s->count); +} + +void resettable_class_set_parent_phases(ResettableClass *rc, + ResettableEnterPhase enter, + ResettableHoldPhase hold, + ResettableExitPhase exit, + ResettablePhases *parent_phases) +{ + *parent_phases = rc->phases; + if (enter) { + rc->phases.enter = enter; + } + if (hold) { + rc->phases.hold = hold; + } + if (exit) { + rc->phases.exit = exit; + } +} + +static const TypeInfo resettable_interface_info = { + .name = TYPE_RESETTABLE_INTERFACE, + .parent = TYPE_INTERFACE, + .class_size = sizeof(ResettableClass), +}; + +static void reset_register_types(void) +{ + type_register_static(&resettable_interface_info); +} + +type_init(reset_register_types) diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ qbus_reset(void *obj, const char *objtype) "obj=%p(%s)" qbus_reset_all(void *obj, const char *objtype) "obj=%p(%s)" qbus_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" qdev_update_parent_bus(void *obj, const char *objtype, void *oldp, const char *oldptype, void *newp, const char *newptype) "obj=%p(%s) old_parent=%p(%s) new_parent=%p(%s)" + +# resettable.c +resettable_reset(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_assert_begin(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_assert_end(void *obj) "obj=%p" +resettable_reset_release_begin(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_release_end(void *obj) "obj=%p" +resettable_phase_enter_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_enter_exec(void *obj, const char *objtype, int type, int has_method) "obj=%p(%s) type=%d method=%d" +resettable_phase_enter_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_phase_hold_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_hold_exec(void *obj, const char *objtype, int has_method) "obj=%p(%s) method=%d" +resettable_phase_hold_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_phase_exit_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_exit_exec(void *obj, const char *objtype, int has_method) "obj=%p(%s) method=%d" +resettable_phase_exit_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_transitional_function(void *obj, const char *objtype) "obj=%p(%s)" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit adds support of Resettable interface to buses and devices: + ResettableState structure is added in the Bus/Device state + Resettable methods are implemented. + device/bus_is_in_reset function defined This commit allows to transition the objects to the new multi-phase interface without changing the reset behavior at all. Object single reset method can be split into the 3 different phases but the 3 phases are still executed in a row for a given object. From the qdev/qbus reset api point of view, nothing is changed. qdev_reset_all() and qbus_reset_all() are not modified as well as device_legacy_reset(). Transition of an object must be done from parent class to child class. Care has been taken to allow the transition of a parent class without requiring the child classes to be transitioned at the same time. Note that SysBus and SysBusDevice class do not need any transition because they do not override the legacy reset method. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/Makefile.include | 1 + include/hw/qdev-core.h | 27 ++++++++++++ hw/core/bus.c | 97 ++++++++++++++++++++++++++++++++++++++++++ hw/core/qdev.c | 93 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 218 insertions(+) diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ tests/fp/%: tests/test-qdev-global-props$(EXESUF): tests/test-qdev-global-props.o \ hw/core/qdev.o hw/core/qdev-properties.o hw/core/hotplug.o\ hw/core/bus.o \ + hw/core/resettable.o \ hw/core/irq.o \ hw/core/fw-path-provider.o \ hw/core/reset.o \ diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ #include "qemu/bitmap.h" #include "qom/object.h" #include "hw/hotplug.h" +#include "hw/resettable.h" enum { DEV_NVECTORS_UNSPECIFIED = -1, @@ -XXX,XX +XXX,XX @@ typedef struct DeviceClass { bool hotpluggable; /* callbacks */ + /* + * Reset method here is deprecated and replaced by methods in the + * resettable class interface to implement a multi-phase reset. + * TODO: remove once every reset callback is unused + */ DeviceReset reset; DeviceRealize realize; DeviceUnrealize unrealize; @@ -XXX,XX +XXX,XX @@ struct NamedGPIOList { /** * DeviceState: * @realized: Indicates whether the device has been fully constructed. + * @reset: ResettableState for the device; handled by Resettable interface. * * This structure should not be accessed directly. We declare it here * so that it can be embedded in individual device state structures. @@ -XXX,XX +XXX,XX @@ struct DeviceState { int num_child_bus; int instance_id_alias; int alias_required_for_version; + ResettableState reset; }; struct DeviceListener { @@ -XXX,XX +XXX,XX @@ typedef struct BusChild { /** * BusState: * @hotplug_handler: link to a hotplug handler associated with bus. + * @reset: ResettableState for the bus; handled by Resettable interface. */ struct BusState { Object obj; @@ -XXX,XX +XXX,XX @@ struct BusState { int num_children; QTAILQ_HEAD(, BusChild) children; QLIST_ENTRY(BusState) sibling; + ResettableState reset; }; /** @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque); void qbus_reset_all(BusState *bus); void qbus_reset_all_fn(void *opaque); +/** + * device_is_in_reset: + * Return true if the device @dev is currently being reset. + */ +bool device_is_in_reset(DeviceState *dev); + +/** + * bus_is_in_reset: + * Return true if the bus @bus is currently being reset. + */ +bool bus_is_in_reset(BusState *bus); + /* This should go away once we get rid of the NULL bus hack */ BusState *sysbus_get_default(void); @@ -XXX,XX +XXX,XX @@ void device_legacy_reset(DeviceState *dev); void device_class_set_props(DeviceClass *dc, Property *props); +/** + * device_class_set_parent_reset: + * TODO: remove the function when DeviceClass's reset method + * is not used anymore. + */ void device_class_set_parent_reset(DeviceClass *dc, DeviceReset dev_reset, DeviceReset *parent_reset); diff --git a/hw/core/bus.c b/hw/core/bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/bus.c +++ b/hw/core/bus.c @@ -XXX,XX +XXX,XX @@ int qbus_walk_children(BusState *bus, return 0; } +bool bus_is_in_reset(BusState *bus) +{ + return resettable_is_in_reset(OBJECT(bus)); +} + +static ResettableState *bus_get_reset_state(Object *obj) +{ + BusState *bus = BUS(obj); + return &bus->reset; +} + +static void bus_reset_child_foreach(Object *obj, ResettableChildCallback cb, + void *opaque, ResetType type) +{ + BusState *bus = BUS(obj); + BusChild *kid; + + QTAILQ_FOREACH(kid, &bus->children, sibling) { + cb(OBJECT(kid->child), opaque, type); + } +} + static void qbus_realize(BusState *bus, DeviceState *parent, const char *name) { const char *typename = object_get_typename(OBJECT(bus)); @@ -XXX,XX +XXX,XX @@ static char *default_bus_get_fw_dev_path(DeviceState *dev) return g_strdup(object_get_typename(OBJECT(dev))); } +/** + * bus_phases_reset: + * Transition reset method for buses to allow moving + * smoothly from legacy reset method to multi-phases + */ +static void bus_phases_reset(BusState *bus) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(bus); + + if (rc->phases.enter) { + rc->phases.enter(OBJECT(bus), RESET_TYPE_COLD); + } + if (rc->phases.hold) { + rc->phases.hold(OBJECT(bus)); + } + if (rc->phases.exit) { + rc->phases.exit(OBJECT(bus)); + } +} + +static void bus_transitional_reset(Object *obj) +{ + BusClass *bc = BUS_GET_CLASS(obj); + + /* + * This will call either @bus_phases_reset (for multi-phases transitioned + * buses) or a bus's specific method for not-yet transitioned buses. + * In both case, it does not reset children. + */ + if (bc->reset) { + bc->reset(BUS(obj)); + } +} + +/** + * bus_get_transitional_reset: + * check if the bus's class is ready for multi-phase + */ +static ResettableTrFunction bus_get_transitional_reset(Object *obj) +{ + BusClass *dc = BUS_GET_CLASS(obj); + if (dc->reset != bus_phases_reset) { + /* + * dc->reset has been overridden by a subclass, + * the bus is not ready for multi phase yet. + */ + return bus_transitional_reset; + } + return NULL; +} + static void bus_class_init(ObjectClass *class, void *data) { BusClass *bc = BUS_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); class->unparent = bus_unparent; bc->get_fw_dev_path = default_bus_get_fw_dev_path; + + rc->get_state = bus_get_reset_state; + rc->child_foreach = bus_reset_child_foreach; + + /* + * @bus_phases_reset is put as the default reset method below, allowing + * to do the multi-phase transition from base classes to leaf classes. It + * allows a legacy-reset Bus class to extend a multi-phases-reset + * Bus class for the following reason: + * + If a base class B has been moved to multi-phase, then it does not + * override this default reset method and may have defined phase methods. + * + A child class C (extending class B) which uses + * bus_class_set_parent_reset() (or similar means) to override the + * reset method will still work as expected. @bus_phases_reset function + * will be registered as the parent reset method and effectively call + * parent reset phases. + */ + bc->reset = bus_phases_reset; + rc->get_transitional_function = bus_get_transitional_reset; } static void qbus_finalize(Object *obj) @@ -XXX,XX +XXX,XX @@ static const TypeInfo bus_info = { .instance_init = qbus_initfn, .instance_finalize = qbus_finalize, .class_init = bus_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_RESETTABLE_INTERFACE }, + { } + }, }; static void bus_register_types(void) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ void qbus_reset_all_fn(void *opaque) qbus_reset_all(bus); } +bool device_is_in_reset(DeviceState *dev) +{ + return resettable_is_in_reset(OBJECT(dev)); +} + +static ResettableState *device_get_reset_state(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + return &dev->reset; +} + +static void device_reset_child_foreach(Object *obj, ResettableChildCallback cb, + void *opaque, ResetType type) +{ + DeviceState *dev = DEVICE(obj); + BusState *bus; + + QLIST_FOREACH(bus, &dev->child_bus, sibling) { + cb(OBJECT(bus), opaque, type); + } +} + /* can be used as ->unplug() callback for the simple cases */ void qdev_simple_device_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ device_vmstate_if_get_id(VMStateIf *obj) return qdev_get_dev_path(dev); } +/** + * device_phases_reset: + * Transition reset method for devices to allow moving + * smoothly from legacy reset method to multi-phases + */ +static void device_phases_reset(DeviceState *dev) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(dev); + + if (rc->phases.enter) { + rc->phases.enter(OBJECT(dev), RESET_TYPE_COLD); + } + if (rc->phases.hold) { + rc->phases.hold(OBJECT(dev)); + } + if (rc->phases.exit) { + rc->phases.exit(OBJECT(dev)); + } +} + +static void device_transitional_reset(Object *obj) +{ + DeviceClass *dc = DEVICE_GET_CLASS(obj); + + /* + * This will call either @device_phases_reset (for multi-phases transitioned + * devices) or a device's specific method for not-yet transitioned devices. + * In both case, it does not reset children. + */ + if (dc->reset) { + dc->reset(DEVICE(obj)); + } +} + +/** + * device_get_transitional_reset: + * check if the device's class is ready for multi-phase + */ +static ResettableTrFunction device_get_transitional_reset(Object *obj) +{ + DeviceClass *dc = DEVICE_GET_CLASS(obj); + if (dc->reset != device_phases_reset) { + /* + * dc->reset has been overridden by a subclass, + * the device is not ready for multi phase yet. + */ + return device_transitional_reset; + } + return NULL; +} + static void device_class_init(ObjectClass *class, void *data) { DeviceClass *dc = DEVICE_CLASS(class); VMStateIfClass *vc = VMSTATE_IF_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); class->unparent = device_unparent; @@ -XXX,XX +XXX,XX @@ static void device_class_init(ObjectClass *class, void *data) dc->hotpluggable = true; dc->user_creatable = true; vc->get_id = device_vmstate_if_get_id; + rc->get_state = device_get_reset_state; + rc->child_foreach = device_reset_child_foreach; + + /* + * @device_phases_reset is put as the default reset method below, allowing + * to do the multi-phase transition from base classes to leaf classes. It + * allows a legacy-reset Device class to extend a multi-phases-reset + * Device class for the following reason: + * + If a base class B has been moved to multi-phase, then it does not + * override this default reset method and may have defined phase methods. + * + A child class C (extending class B) which uses + * device_class_set_parent_reset() (or similar means) to override the + * reset method will still work as expected. @device_phases_reset function + * will be registered as the parent reset method and effectively call + * parent reset phases. + */ + dc->reset = device_phases_reset; + rc->get_transitional_function = device_get_transitional_reset; object_class_property_add_bool(class, "realized", device_get_realized, device_set_realized, @@ -XXX,XX +XXX,XX @@ static const TypeInfo device_type_info = { .class_size = sizeof(DeviceClass), .interfaces = (InterfaceInfo[]) { { TYPE_VMSTATE_IF }, + { TYPE_RESETTABLE_INTERFACE }, { } } }; -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Add a function resettable_change_parent() to do the required plumbing when changing the parent a of Resettable object. We need to make sure that the reset state of the object remains coherent with the reset state of the new parent. We make the 2 following hypothesis: + when an object is put in a parent under reset, the object goes in reset. + when an object is removed from a parent under reset, the object leaves reset. The added function avoids any glitch if both old and new parent are already in reset. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-6-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/resettable.h | 16 +++++++++++ hw/core/resettable.c | 62 +++++++++++++++++++++++++++++++++++++++-- hw/core/trace-events | 1 + 3 files changed, 77 insertions(+), 2 deletions(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ void resettable_release_reset(Object *obj, ResetType type); */ bool resettable_is_in_reset(Object *obj); +/** + * resettable_change_parent: + * Indicate that the parent of Ressettable @obj is changing from @oldp to @newp. + * All 3 objects must implement resettable interface. @oldp or @newp may be + * NULL. + * + * This function will adapt the reset state of @obj so that it is coherent + * with the reset state of @newp. It may trigger @resettable_assert_reset() + * or @resettable_release_reset(). It will do such things only if the reset + * state of @newp and @oldp are different. + * + * When using this function during reset, it must only be called during + * a hold phase method. Calling this during enter or exit phase is an error. + */ +void resettable_change_parent(Object *obj, Object *newp, Object *oldp); + /** * resettable_class_set_parent_phases: * diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type); * enter_phase_in_progress: * True if we are currently in reset enter phase. * - * Note: This flag is only used to guarantee (using asserts) that the reset - * API is used correctly. We can use a global variable because we rely on the + * exit_phase_in_progress: + * count the number of exit phase we are in. + * + * Note: These flags are only used to guarantee (using asserts) that the reset + * API is used correctly. We can use global variables because we rely on the * iothread mutex to ensure only one reset operation is in a progress at a * given time. */ static bool enter_phase_in_progress; +static unsigned exit_phase_in_progress; void resettable_reset(Object *obj, ResetType type) { @@ -XXX,XX +XXX,XX @@ void resettable_release_reset(Object *obj, ResetType type) trace_resettable_reset_release_begin(obj, type); assert(!enter_phase_in_progress); + exit_phase_in_progress += 1; resettable_phase_exit(obj, NULL, type); + exit_phase_in_progress -= 1; trace_resettable_reset_release_end(obj); } @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) trace_resettable_phase_exit_end(obj, obj_typename, s->count); } +/* + * resettable_get_count: + * Get the count of the Resettable object @obj. Return 0 if @obj is NULL. + */ +static unsigned resettable_get_count(Object *obj) +{ + if (obj) { + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + return rc->get_state(obj)->count; + } + return 0; +} + +void resettable_change_parent(Object *obj, Object *newp, Object *oldp) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + unsigned newp_count = resettable_get_count(newp); + unsigned oldp_count = resettable_get_count(oldp); + + /* + * Ensure we do not change parent when in enter or exit phase. + * During these phases, the reset subtree being updated is partly in reset + * and partly not in reset (it depends on the actual position in + * resettable_child_foreach()s). We are not able to tell in which part is a + * leaving or arriving device. Thus we cannot set the reset count of the + * moving device to the proper value. + */ + assert(!enter_phase_in_progress && !exit_phase_in_progress); + trace_resettable_change_parent(obj, oldp, oldp_count, newp, newp_count); + + /* + * At most one of the two 'for' loops will be executed below + * in order to cope with the difference between the two counts. + */ + /* if newp is more reset than oldp */ + for (unsigned i = oldp_count; i < newp_count; i++) { + resettable_assert_reset(obj, RESET_TYPE_COLD); + } + /* + * if obj is leaving a bus under reset, we need to ensure + * hold phase is not pending. + */ + if (oldp_count && s->hold_phase_pending) { + resettable_phase_hold(obj, NULL, RESET_TYPE_COLD); + } + /* if oldp is more reset than newp */ + for (unsigned i = newp_count; i < oldp_count; i++) { + resettable_release_reset(obj, RESET_TYPE_COLD); + } +} + void resettable_class_set_parent_phases(ResettableClass *rc, ResettableEnterPhase enter, ResettableHoldPhase hold, diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ resettable_reset_assert_begin(void *obj, int cold) "obj=%p cold=%d" resettable_reset_assert_end(void *obj) "obj=%p" resettable_reset_release_begin(void *obj, int cold) "obj=%p cold=%d" resettable_reset_release_end(void *obj) "obj=%p" +resettable_change_parent(void *obj, void *o, unsigned oc, void *n, unsigned nc) "obj=%p from=%p(%d) to=%p(%d)" resettable_phase_enter_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" resettable_phase_enter_exec(void *obj, const char *objtype, int type, int has_method) "obj=%p(%s) type=%d method=%d" resettable_phase_enter_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> In qdev_set_parent_bus(), when changing the parent bus of a realized device, if the source and destination buses are not in the same reset state, some adaptations are required. This patch adds needed call to resettable_change_parent() to make sure a device reset state stays coherent with its parent bus. The addition is a no-op if: 1. the device being parented is not realized. 2. the device is realized, but both buses are not under reset. Case 2 means that as long as qdev_set_parent_bus() is called during the machine realization procedure (which is before the machine reset so nothing is in reset), it is a no op. There are 52 call sites of qdev_set_parent_bus(). All but one fall into the no-op case: + 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/ {vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device parent bus just before realizing the same vdev(vgpu). + hw/core/qdev.c: when creating a device in qdev_try_create() + hw/core/sysbus.c: when initializing a device in the sysbus + hw/i386/amd_iommu.c: before realizing AMDVIState/pci + hw/isa/piix4.c: before realizing PIIX4State/rtc + hw/misc/auxbus.c: when creating an AUXBus + hw/misc/auxbus.c: when creating an AUXBus child + hw/misc/macio/macio.c: when initializing a MACIOState child + hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu + hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda + hw/net/virtio-net.c: Used for migration when using the failover mechanism to migration a vfio-pci/net. It is a no-op because at this point the device is already on the bus. + hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root + hw/pci-host/gpex.c: before realizing GPEXHost/root + hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev + hw/pci-host/q35.c: before realizing Q35PCIHost/mch + hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev + hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root + hw/s390x/event-facility.c: when creating SCLPEventFacility/ TYPE_SCLP_QUIESCE + hw/s390x/event-facility.c: ditto with SCLPEventFacility/ TYPE_SCLP_CPU_HOTPLUG + hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice just after realizing it. Ok because at this point the destination bus (sysbus) is not in reset; the realize step is before the machine reset. + hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below. + hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs line in ssi_auto_connect_slave(). Ok because this function is only used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c, hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c. + hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device + qdev-monitor.c: in device hotplug creation procedure before realize Note that this commit alone will have no effect, right now there is no use of resettable API to reset anything. So a bus will never be tagged as in-reset by this same API. The one place where side-effect will occurs is in hw/sd/core.c in sdbus_reparent_card(). This function is only used in the raspi machines, including during the sysbus reset procedure. This case will be carrefully handled when doing the multiple phase reset transition. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-7-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/qdev.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void bus_add_child(BusState *bus, DeviceState *child) void qdev_set_parent_bus(DeviceState *dev, BusState *bus) { - bool replugging = dev->parent_bus != NULL; + BusState *old_parent_bus = dev->parent_bus; - if (replugging) { + if (old_parent_bus) { trace_qdev_update_parent_bus(dev, object_get_typename(OBJECT(dev)), - dev->parent_bus, object_get_typename(OBJECT(dev->parent_bus)), + old_parent_bus, object_get_typename(OBJECT(old_parent_bus)), OBJECT(bus), object_get_typename(OBJECT(bus))); /* * Keep a reference to the device while it's not plugged into * any bus, to avoid it potentially evaporating when it is * dereffed in bus_remove_child(). + * Also keep the ref of the parent bus until the end, so that + * we can safely call resettable_change_parent() below. */ object_ref(OBJECT(dev)); bus_remove_child(dev->parent_bus, dev); - object_unref(OBJECT(dev->parent_bus)); } dev->parent_bus = bus; object_ref(OBJECT(bus)); bus_add_child(bus, dev); - if (replugging) { + if (dev->realized) { + resettable_change_parent(OBJECT(dev), OBJECT(bus), + OBJECT(old_parent_bus)); + } + if (old_parent_bus) { + object_unref(OBJECT(old_parent_bus)); object_unref(OBJECT(dev)); } } -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit make use of the resettable API to reset the device being hotplugged when it is realized. Also it ensures it is put in a reset state coherent with the parent it is plugged into. Note that there is a difference in the reset. Instead of resetting only the hotplugged device, we reset also its subtree (switch to resettable API). This is not expected to be a problem because sub-buses are just realized too. If a hotplugged device has any sub-buses it is logical to reset them too at this point. The recently added should_be_hidden and PCI's partially_hotplugged mechanisms do not interfere with realize operation: + In the should_be_hidden use case, device creation is delayed. + The partially_hotplugged mechanism prevents a device to be unplugged and unrealized from qdev POV and unrealized. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-8-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/resettable.h | 11 +++++++++++ hw/core/qdev.c | 15 ++++++++++++++- 2 files changed, 25 insertions(+), 1 deletion(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ struct ResettableState { bool exit_phase_in_progress; }; +/** + * resettable_state_clear: + * Clear the state. It puts the state to the initial (zeroed) state required + * to reuse an object. Typically used in realize step of base classes + * implementing the interface. + */ +static inline void resettable_state_clear(ResettableState *state) +{ + memset(state, 0, sizeof(ResettableState)); +} + /** * resettable_reset: * Trigger a reset on an object @obj of type @type. @obj must implement diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } + /* + * Clear the reset state, in case the object was previously unrealized + * with a dirty state. + */ + resettable_state_clear(&dev->reset); + QLIST_FOREACH(bus, &dev->child_bus, sibling) { object_property_set_bool(OBJECT(bus), true, "realized", &local_err); @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } if (dev->hotplugged) { - device_legacy_reset(dev); + /* + * Reset the device, as well as its subtree which, at this point, + * should be realized too. + */ + resettable_assert_reset(OBJECT(dev), RESET_TYPE_COLD); + resettable_change_parent(OBJECT(dev), OBJECT(dev->parent_bus), + NULL); + resettable_release_reset(OBJECT(dev), RESET_TYPE_COLD); } dev->pending_deleted_event = false; -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Deprecate device_legacy_reset(), qdev_reset_all() and qbus_reset_all() to be replaced by new functions device_cold_reset() and bus_cold_reset() which uses resettable API. Also introduce resettable_cold_reset_fn() which may be used as a replacement for qdev_reset_all_fn and qbus_reset_all_fn(). Following patches will be needed to look at legacy reset call sites and switch to resettable api. The legacy functions will be removed when unused. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-9-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-core.h | 27 +++++++++++++++++++++++++++ include/hw/resettable.h | 9 +++++++++ hw/core/bus.c | 5 +++++ hw/core/qdev.c | 5 +++++ hw/core/resettable.c | 5 +++++ 5 files changed, 51 insertions(+) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ int qdev_walk_children(DeviceState *dev, qdev_walkerfn *post_devfn, qbus_walkerfn *post_busfn, void *opaque); +/** + * @qdev_reset_all: + * Reset @dev. See @qbus_reset_all() for more details. + * + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use device_cold_reset() now. + */ void qdev_reset_all(DeviceState *dev); void qdev_reset_all_fn(void *opaque); @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque); * hard reset means that qbus_reset_all will reset all state of the device. * For PCI devices, for example, this will include the base address registers * or configuration space. + * + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use bus_cold_reset() now. */ void qbus_reset_all(BusState *bus); void qbus_reset_all_fn(void *opaque); +/** + * device_cold_reset: + * Reset device @dev and perform a recursive processing using the resettable + * interface. It triggers a RESET_TYPE_COLD. + */ +void device_cold_reset(DeviceState *dev); + +/** + * bus_cold_reset: + * + * Reset bus @bus and perform a recursive processing using the resettable + * interface. It triggers a RESET_TYPE_COLD. + */ +void bus_cold_reset(BusState *bus); + /** * device_is_in_reset: * Return true if the device @dev is currently being reset. @@ -XXX,XX +XXX,XX @@ void qdev_machine_init(void); * device_legacy_reset: * * Reset a single device (by calling the reset method). + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use device_cold_reset() now. */ void device_legacy_reset(DeviceState *dev); diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ bool resettable_is_in_reset(Object *obj); */ void resettable_change_parent(Object *obj, Object *newp, Object *oldp); +/** + * resettable_cold_reset_fn: + * Helper to call resettable_reset((Object *) opaque, RESET_TYPE_COLD). + * + * This function is typically useful to register a reset handler with + * qemu_register_reset. + */ +void resettable_cold_reset_fn(void *opaque); + /** * resettable_class_set_parent_phases: * diff --git a/hw/core/bus.c b/hw/core/bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/bus.c +++ b/hw/core/bus.c @@ -XXX,XX +XXX,XX @@ int qbus_walk_children(BusState *bus, return 0; } +void bus_cold_reset(BusState *bus) +{ + resettable_reset(OBJECT(bus), RESET_TYPE_COLD); +} + bool bus_is_in_reset(BusState *bus) { return resettable_is_in_reset(OBJECT(bus)); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ void qbus_reset_all_fn(void *opaque) qbus_reset_all(bus); } +void device_cold_reset(DeviceState *dev) +{ + resettable_reset(OBJECT(dev), RESET_TYPE_COLD); +} + bool device_is_in_reset(DeviceState *dev) { return resettable_is_in_reset(OBJECT(dev)); diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ void resettable_change_parent(Object *obj, Object *newp, Object *oldp) } } +void resettable_cold_reset_fn(void *opaque) +{ + resettable_reset((Object *) opaque, RESET_TYPE_COLD); +} + void resettable_class_set_parent_phases(ResettableClass *rc, ResettableEnterPhase enter, ResettableHoldPhase hold, -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200123132823.1117486-10-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/devel/index.rst | 1 + docs/devel/reset.rst | 289 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 290 insertions(+) create mode 100644 docs/devel/reset.rst diff --git a/docs/devel/index.rst b/docs/devel/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/index.rst +++ b/docs/devel/index.rst @@ -XXX,XX +XXX,XX @@ Contents: tcg tcg-plugins bitops + reset diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ + +======================================= +Reset in QEMU: the Resettable interface +======================================= + +The reset of qemu objects is handled using the resettable interface declared +in ``include/hw/resettable.h``. + +This interface allows objects to be grouped (on a tree basis); so that the +whole group can be reset consistently. Each individual member object does not +have to care about others; in particular, problems of order (which object is +reset first) are addressed. + +As of now DeviceClass and BusClass implement this interface. + + +Triggering reset +---------------- + +This section documents the APIs which "users" of a resettable object should use +to control it. All resettable control functions must be called while holding +the iothread lock. + +You can apply a reset to an object using ``resettable_assert_reset()``. You need +to call ``resettable_release_reset()`` to release the object from reset. To +instantly reset an object, without keeping it in reset state, just call +``resettable_reset()``. These functions take two parameters: a pointer to the +object to reset and a reset type. + +Several types of reset will be supported. For now only cold reset is defined; +others may be added later. The Resettable interface handles reset types with an +enum: + +``RESET_TYPE_COLD`` + Cold reset is supported by every resettable object. In QEMU, it means we reset + to the initial state corresponding to the start of QEMU; this might differ + from what is a real hardware cold reset. It differs from other resets (like + warm or bus resets) which may keep certain parts untouched. + +Calling ``resettable_reset()`` is equivalent to calling +``resettable_assert_reset()`` then ``resettable_release_reset()``. It is +possible to interleave multiple calls to these three functions. There may +be several reset sources/controllers of a given object. The interface handles +everything and the different reset controllers do not need to know anything +about each others. The object will leave reset state only when each other +controllers end their reset operation. This point is handled internally by +maintaining a count of in-progress resets; it is crucial to call +``resettable_release_reset()`` one time and only one time per +``resettable_assert_reset()`` call. + +For now migration of a device or bus in reset is not supported. Care must be +taken not to delay ``resettable_release_reset()`` after its +``resettable_assert_reset()`` counterpart. + +Note that, since resettable is an interface, the API takes a simple Object as +parameter. Still, it is a programming error to call a resettable function on a +non-resettable object and it will trigger a run time assert error. Since most +calls to resettable interface are done through base class functions, such an +error is not likely to happen. + +For Devices and Buses, the following helper functions exist: + +- ``device_cold_reset()`` +- ``bus_cold_reset()`` + +These are simple wrappers around resettable_reset() function; they only cast the +Device or Bus into an Object and pass the cold reset type. When possible +prefer to use these functions instead of ``resettable_reset()``. + +Device and bus functions co-exist because there can be semantic differences +between resetting a bus and resetting the controller bridge which owns it. +For example, consider a SCSI controller. Resetting the controller puts all +its registers back to what reset state was as well as reset everything on the +SCSI bus, whereas resetting just the SCSI bus only resets everything that's on +it but not the controller. + + +Multi-phase mechanism +--------------------- + +This section documents the internals of the resettable interface. + +The resettable interface uses a multi-phase system to relieve objects and +machines from reset ordering problems. To address this, the reset operation +of an object is split into three well defined phases. + +When resetting several objects (for example the whole machine at simulation +startup), all first phases of all objects are executed, then all second phases +and then all third phases. + +The three phases are: + +1. The **enter** phase is executed when the object enters reset. It resets only + local state of the object; it must not do anything that has a side-effect + on other objects, such as raising or lowering a qemu_irq line or reading or + writing guest memory. + +2. The **hold** phase is executed for entry into reset, once every object in the + group which is being reset has had its *enter* phase executed. At this point + devices can do actions that affect other objects. + +3. The **exit** phase is executed when the object leaves the reset state. + Actions affecting other objects are permitted. + +As said in previous section, the interface maintains a count of reset. This +count is used to ensure phases are executed only when required. *enter* and +*hold* phases are executed only when asserting reset for the first time +(if an object is already in reset state when calling +``resettable_assert_reset()`` or ``resettable_reset()``, they are not +executed). +The *exit* phase is executed only when the last reset operation ends. Therefore +the object does not need to care how many of reset controllers it has and how +many of them have started a reset. + + +Handling reset in a resettable object +------------------------------------- + +This section documents the APIs that an implementation of a resettable object +must provide and what functions it has access to. It is intended for people +who want to implement or convert a class which has the resettable interface; +for example when specializing an existing device or bus. + +Methods to implement +.................... + +Three methods should be defined or left empty. Each method corresponds to a +phase of the reset; they are name ``phases.enter()``, ``phases.hold()`` and +``phases.exit()``. They all take the object as parameter. The *enter* method +also take the reset type as second parameter. + +When extending an existing class, these methods may need to be extended too. +The ``resettable_class_set_parent_phases()`` class function may be used to +backup parent class methods. + +Here follows an example to implement reset for a Device which sets an IO while +in reset. + +:: + + static void mydev_reset_enter(Object *obj, ResetType type) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class enter phase */ + if (myclass->parent_phases.enter) { + myclass->parent_phases.enter(obj, type); + } + /* initialize local state only */ + mydev->var = 0; + } + + static void mydev_reset_hold(Object *obj) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class hold phase */ + if (myclass->parent_phases.hold) { + myclass->parent_phases.hold(obj); + } + /* set an IO */ + qemu_set_irq(mydev->irq, 1); + } + + static void mydev_reset_exit(Object *obj) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class exit phase */ + if (myclass->parent_phases.exit) { + myclass->parent_phases.exit(obj); + } + /* clear an IO */ + qemu_set_irq(mydev->irq, 0); + } + + typedef struct MyDevClass { + MyParentClass parent_class; + /* to store eventual parent reset methods */ + ResettablePhases parent_phases; + } MyDevClass; + + static void mydev_class_init(ObjectClass *class, void *data) + { + MyDevClass *myclass = MYDEV_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); + resettable_class_set_parent_reset_phases(rc, + mydev_reset_enter, + mydev_reset_hold, + mydev_reset_exit, + &myclass->parent_phases); + } + +In the above example, we override all three phases. It is possible to override +only some of them by passing NULL instead of a function pointer to +``resettable_class_set_parent_reset_phases()``. For example, the following will +only override the *enter* phase and leave *hold* and *exit* untouched:: + + resettable_class_set_parent_reset_phases(rc, mydev_reset_enter, + NULL, NULL, + &myclass->parent_phases); + +This is equivalent to providing a trivial implementation of the hold and exit +phases which does nothing but call the parent class's implementation of the +phase. + +Polling the reset state +....................... + +Resettable interface provides the ``resettable_is_in_reset()`` function. +This function returns true if the object parameter is currently under reset. + +An object is under reset from the beginning of the *init* phase to the end of +the *exit* phase. During all three phases, the function will return that the +object is in reset. + +This function may be used if the object behavior has to be adapted +while in reset state. For example if a device has an irq input, +it will probably need to ignore it while in reset; then it can for +example check the reset state at the beginning of the irq callback. + +Note that until migration of the reset state is supported, an object +should not be left in reset. So apart from being currently executing +one of the reset phases, the only cases when this function will return +true is if an external interaction (like changing an io) is made during +*hold* or *exit* phase of another object in the same reset group. + +Helpers ``device_is_in_reset()`` and ``bus_is_in_reset()`` are also provided +for devices and buses and should be preferred. + + +Base class handling of reset +---------------------------- + +This section documents parts of the reset mechanism that you only need to know +about if you are extending it to work with a new base class other than +DeviceClass or BusClass, or maintaining the existing code in those classes. Most +people can ignore it. + +Methods to implement +.................... + +There are two other methods that need to exist in a class implementing the +interface: ``get_state()`` and ``child_foreach()``. + +``get_state()`` is simple. *resettable* is an interface and, as a consequence, +does not have any class state structure. But in order to factorize the code, we +need one. This method must return a pointer to ``ResettableState`` structure. +The structure must be allocated by the base class; preferably it should be +located inside the object instance structure. + +``child_foreach()`` is more complex. It should execute the given callback on +every reset child of the given resettable object. All children must be +resettable too. Additional parameters (a reset type and an opaque pointer) must +be passed to the callback too. + +In ``DeviceClass`` and ``BusClass`` the ``ResettableState`` is located +``DeviceState`` and ``BusState`` structure. ``child_foreach()`` is implemented +to follow the bus hierarchy; for a bus, it calls the function on every child +device; for a device, it calls the function on every bus child. When we reset +the main system bus, we reset the whole machine bus tree. + +Changing a resettable parent +............................ + +One thing which should be taken care of by the base class is handling reset +hierarchy changes. + +The reset hierarchy is supposed to be static and built during machine creation. +But there are actually some exceptions. To cope with this, the resettable API +provides ``resettable_change_parent()``. This function allows to set, update or +remove the parent of a resettable object after machine creation is done. As +parameters, it takes the object being moved, the old parent if any and the new +parent if any. + +This function can be used at any time when not in a reset operation. During +a reset operation it must be used only in *hold* phase. Using it in *enter* or +*exit* phase is an error. +Also it should not be used during machine creation, although it is harmless to +do so: the function is a no-op as long as old and new parent are NULL or not +in reset. + +There is currently 2 cases where this function is used: + +1. *device hotplug*; it means a new device is introduced on a live bus. + +2. *hot bus change*; it means an existing live device is added, moved or + removed in the bus hierarchy. At the moment, it occurs only in the raspi + machines for changing the sdbus used by sd card. -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Replace deprecated qbus_reset_all by resettable_cold_reset_fn for the sysbus reset registration. Apart for the raspi machines, this does not impact the behavior because: + at this point resettable just calls the old reset methods of devices and buses in the same order as qdev/qbus. + resettable handlers registered with qemu_register_reset are serialized; there is no interleaving. + eventual explicit calls to legacy reset API (device_reset or qdev/qbus_reset) inside this reset handler will not be masked out by resettable mechanism; they do not go through resettable api. For the raspi machines, during the sysbus reset the sd-card is not reset twice anymore but only once. This is a consequence of switching both sysbus reset and changing parent to resettable; it detects the second reset is not needed. This has no impact on the state after reset; the sd-card reset method only reset local state and query information from the block backend. The raspi reset change can be observed by using the following command (reset will occurs, then do Ctrl-C to end qemu; no firmware is given here). qemu-system-aarch64 -M raspi3 \ -trace resettable_phase_hold_exec \ -trace qdev_update_parent_bus \ -trace resettable_change_parent \ -trace qdev_reset -trace qbus_reset Before the patch, the qdev/qbus_reset traces show when reset method are called. After the patch, the resettable_phase_hold_exec show when reset method are called. The traced reset order of the raspi3 is listed below. I've added empty lines and the tree structure. +->bcm2835-peripherals reset | | +->sd-card reset | +->sd-bus reset +->bcm2835_gpio reset | -> dev_update_parent_bus (move the sd-card on the sdhci-bus) | -> resettable_change_parent | +->bcm2835-dma reset | | +->bcm2835-sdhost-bus reset +->bcm2835-sdhost reset | | +->sd-card (reset ONLY BEFORE BEFORE THE PATCH) | +->sdhci-bus reset +->generic-sdhci reset | +->bcm2835-rng reset +->bcm2835-property reset +->bcm2835-fb reset +->bcm2835-mbox reset +->bcm2835-aux reset +->pl011 reset +->bcm2835-ic reset +->bcm2836-control reset System reset In both case, the sd-card is reset (being on bcm2835_gpio/sd-bus) then moved to generic-sdhci/sdhci-bus by the bcm2835_gpio reset method. Before the patch, it is then reset again being part of generic-sdhci/sdhci-bus. After the patch, it considered again for reset but its reset method is not called because it is already flagged as reset. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-11-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- vl.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/vl.c b/vl.c index XXXXXXX..XXXXXXX 100644 --- a/vl.c +++ b/vl.c @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv, char **envp) /* TODO: once all bus devices are qdevified, this should be done * when bus is created by qdev.c */ - qemu_register_reset(qbus_reset_all_fn, sysbus_get_default()); + /* + * TODO: If we had a main 'reset container' that the whole system + * lived in, we could reset that using the multi-phase reset + * APIs. For the moment, we just reset the sysbus, which will cause + * all devices hanging off it (and all their child buses, recursively) + * to be reset. Note that this will *not* reset any Device objects + * which are not attached to some part of the qbus tree! + */ + qemu_register_reset(resettable_cold_reset_fn, sysbus_get_default()); qemu_run_machine_init_done_notifiers(); if (rom_check_and_register_reset() != 0) { -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Replace deprecated qdev_reset_all by resettable_cold_reset_fn for the ipl registration in the main reset handlers. This does not impact the behavior for the following reasons: + at this point resettable just call the old reset methods of devices and buses in the same order than qdev/qbus. + resettable handlers registered with qemu_register_reset are serialized; there is no interleaving. + eventual explicit calls to legacy reset API (device_reset or qdev/qbus_reset) inside this reset handler will not be masked out by resettable mechanism; they do not go through resettable api. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200123132823.1117486-12-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/s390x/ipl.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/ipl.c +++ b/hw/s390x/ipl.c @@ -XXX,XX +XXX,XX @@ static void s390_ipl_realize(DeviceState *dev, Error **errp) */ ipl->compat_start_addr = ipl->start_addr; ipl->compat_bios_start_addr = ipl->bios_start_addr; - qemu_register_reset(qdev_reset_all_fn, dev); + /* + * Because this Device is not on any bus in the qbus tree (it is + * not a sysbus device and it's not on some other bus like a PCI + * bus) it will not be automatically reset by the 'reset the + * sysbus' hook registered by vl.c like most devices. So we must + * manually register a reset hook for it. + * TODO: there should be a better way to do this. + */ + qemu_register_reset(resettable_cold_reset_fn, dev); error: error_propagate(errp, err); } -- 2.20.1 From: Zenghui Yu <yuzenghui@huawei.com> If LPIs are disabled, KVM will just ignore the GICR_PENDBASER.PTZ bit when restoring GICR_CTLR. Setting PTZ here makes littlt sense in "reduce GIC initialization time". And what's worse, PTZ is generally programmed by guest to indicate to the Redistributor whether the LPI Pending table is zero when enabling LPIs. If migration is triggered when the PTZ has just been cleared by guest (and before enabling LPIs), we will see PTZ==1 on the destination side, which is not as expected. Let's just drop this hackish userspace behavior. Also take this chance to refine the comment a bit. Fixes: 367b9f527bec ("hw/intc/arm_gicv3_kvm: Implement get/put functions") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20200119133051.642-1-yuzenghui@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_put(GICv3State *s) kvm_gicd_access(s, GICD_CTLR, &reg, true); if (redist_typer & GICR_TYPER_PLPIS) { - /* Set base addresses before LPIs are enabled by GICR_CTLR write */ + /* + * Restore base addresses before LPIs are potentially enabled by + * GICR_CTLR write + */ for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { GICv3CPUState *c = &s->cpu[ncpu]; @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_put(GICv3State *s) kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, true); reg64 = c->gicr_pendbaser; - if (!(c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS)) { - /* Setting PTZ is advised if LPIs are disabled, to reduce - * GIC initialization time. - */ - reg64 |= GICR_PENDBASER_PTZ; - } regl = (uint32_t)reg64; kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, true); regh = (uint32_t)(reg64 >> 32); -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-2-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 46 ++++++++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 19 deletions(-) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ int kvm_arm_vcpu_init(CPUState *cs); /** - * kvm_arm_vcpu_finalize + * kvm_arm_vcpu_finalize: * @cs: CPUState - * @feature: int + * @feature: feature to finalize * * Finalizes the configuration of the specified VCPU feature by * invoking the KVM_ARM_VCPU_FINALIZE ioctl. Features requiring @@ -XXX,XX +XXX,XX @@ void kvm_arm_register_device(MemoryRegion *mr, uint64_t devid, uint64_t group, int kvm_arm_init_cpreg_list(ARMCPU *cpu); /** - * kvm_arm_reg_syncs_via_cpreg_list - * regidx: KVM register index + * kvm_arm_reg_syncs_via_cpreg_list: + * @regidx: KVM register index * * Return true if this KVM register should be synchronized via the * cpreg list of arbitrary system registers, false if it is synchronized @@ -XXX,XX +XXX,XX @@ int kvm_arm_init_cpreg_list(ARMCPU *cpu); bool kvm_arm_reg_syncs_via_cpreg_list(uint64_t regidx); /** - * kvm_arm_cpreg_level - * regidx: KVM register index + * kvm_arm_cpreg_level: + * @regidx: KVM register index * * Return the level of this coprocessor/system register. Return value is * either KVM_PUT_RUNTIME_STATE, KVM_PUT_RESET_STATE, or KVM_PUT_FULL_STATE. @@ -XXX,XX +XXX,XX @@ void kvm_arm_init_serror_injection(CPUState *cs); * @cpu: ARMCPU * * Get VCPU related state from kvm. + * + * Returns: 0 if success else < 0 error code */ int kvm_get_vcpu_events(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ int kvm_get_vcpu_events(ARMCPU *cpu); * @cpu: ARMCPU * * Put VCPU related state to kvm. + * + * Returns: 0 if success else < 0 error code */ int kvm_put_vcpu_events(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ typedef struct ARMHostCPUFeatures { /** * kvm_arm_get_host_cpu_features: - * @ahcc: ARMHostCPUClass to fill in + * @ahcf: ARMHostCPUClass to fill in * * Probe the capabilities of the host kernel's preferred CPU and fill * in the ARMHostCPUClass struct accordingly. + * + * Returns true on success and false otherwise. */ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf); @@ -XXX,XX +XXX,XX @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu); bool kvm_arm_aarch32_supported(CPUState *cs); /** - * bool kvm_arm_pmu_supported: + * kvm_arm_pmu_supported: * @cs: CPUState * * Returns: true if the KVM VCPU can enable its PMU @@ -XXX,XX +XXX,XX @@ bool kvm_arm_aarch32_supported(CPUState *cs); bool kvm_arm_pmu_supported(CPUState *cs); /** - * bool kvm_arm_sve_supported: + * kvm_arm_sve_supported: * @cs: CPUState * * Returns true if the KVM VCPU can enable SVE and false otherwise. @@ -XXX,XX +XXX,XX @@ bool kvm_arm_pmu_supported(CPUState *cs); bool kvm_arm_sve_supported(CPUState *cs); /** - * kvm_arm_get_max_vm_ipa_size - Returns the number of bits in the - * IPA address space supported by KVM - * + * kvm_arm_get_max_vm_ipa_size: * @ms: Machine state handle + * + * Returns the number of bits in the IPA address space supported by KVM */ int kvm_arm_get_max_vm_ipa_size(MachineState *ms); /** - * kvm_arm_sync_mpstate_to_kvm + * kvm_arm_sync_mpstate_to_kvm: * @cpu: ARMCPU * * If supported set the KVM MP_STATE based on QEMU's model. + * + * Returns 0 on success and -1 on failure. */ int kvm_arm_sync_mpstate_to_kvm(ARMCPU *cpu); /** - * kvm_arm_sync_mpstate_to_qemu + * kvm_arm_sync_mpstate_to_qemu: * @cpu: ARMCPU * * If supported get the MP_STATE from KVM and store in QEMU's model. + * + * Returns 0 on success and aborts on failure. */ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level); static inline void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) { - /* This should never actually be called in the "not KVM" case, + /* + * This should never actually be called in the "not KVM" case, * but set up the fields to indicate an error anyway. */ cpu->kvm_target = QEMU_KVM_ARM_TARGET_NONE; @@ -XXX,XX +XXX,XX @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit); * * Return: TRUE if any hardware breakpoints in use. */ - bool kvm_arm_hw_debug_active(CPUState *cs); /** * kvm_arm_copy_hw_debug_data: - * * @ptr: kvm_guest_debug_arch structure * * Copy the architecture specific debug registers into the * kvm_guest_debug ioctl structure. */ struct kvm_guest_debug_arch; - void kvm_arm_copy_hw_debug_data(struct kvm_guest_debug_arch *ptr); /** - * its_class_name + * its_class_name: * * Return the ITS class name to use depending on whether KVM acceleration * and KVM CAP_SIGNAL_MSI are supported -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-3-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 0) static void virt_machine_4_2_options(MachineClass *mc) { + virt_machine_5_0_options(mc); compat_props_add(mc->compat_props, hw_compat_4_2, hw_compat_4_2_len); } DEFINE_VIRT_MACHINE(4, 2) -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Add the missing GENERIC_TIMER feature to kvm64 cpus. We don't currently use these registers when KVM is enabled, but it's probably best we add the feature flag for consistency and potential future use. There's also precedent, as we add the PMU feature flag to KVM enabled guests, even though we don't use those registers either. This change was originally posted as a hunk of a different, never merged patch from Bijan Mottahedeh. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200120101023.16030-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) set_feature(&features, ARM_FEATURE_NEON); set_feature(&features, ARM_FEATURE_AARCH64); set_feature(&features, ARM_FEATURE_PMU); + set_feature(&features, ARM_FEATURE_GENERIC_TIMER); ahcf->features = features; -- 2.20.1 From: Andrew Jones <drjones@redhat.com> If we know what the default value should be then we can test for that as well as the feature existence. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200120101023.16030-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 37 +++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static bool resp_get_feature(QDict *resp, const char *feature) qobject_unref(_resp); \ }) +#define assert_feature(qts, cpu_type, feature, expected_value) \ +({ \ + QDict *_resp, *_props; \ + \ + _resp = do_query_no_props(qts, cpu_type); \ + g_assert(_resp); \ + g_assert(resp_has_props(_resp)); \ + _props = resp_get_props(_resp); \ + g_assert(qdict_get(_props, feature)); \ + g_assert(qdict_get_bool(_props, feature) == (expected_value)); \ + qobject_unref(_resp); \ +}) + +#define assert_has_feature_enabled(qts, cpu_type, feature) \ + assert_feature(qts, cpu_type, feature, true) + +#define assert_has_feature_disabled(qts, cpu_type, feature) \ + assert_feature(qts, cpu_type, feature, false) + static void assert_type_full(QTestState *qts) { const char *error; @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_error(qts, "host", "The CPU type 'host' requires KVM", NULL); /* Test expected feature presence/absence for some cpu types */ - assert_has_feature(qts, "max", "pmu"); - assert_has_feature(qts, "cortex-a15", "pmu"); + assert_has_feature_enabled(qts, "max", "pmu"); + assert_has_feature_enabled(qts, "cortex-a15", "pmu"); assert_has_not_feature(qts, "cortex-a15", "aarch64"); if (g_str_equal(qtest_get_arch(), "aarch64")) { - assert_has_feature(qts, "max", "aarch64"); - assert_has_feature(qts, "max", "sve"); - assert_has_feature(qts, "max", "sve128"); - assert_has_feature(qts, "cortex-a57", "pmu"); - assert_has_feature(qts, "cortex-a57", "aarch64"); + assert_has_feature_enabled(qts, "max", "aarch64"); + assert_has_feature_enabled(qts, "max", "sve"); + assert_has_feature_enabled(qts, "max", "sve128"); + assert_has_feature_enabled(qts, "cortex-a57", "pmu"); + assert_has_feature_enabled(qts, "cortex-a57", "aarch64"); sve_tests_default(qts, "max"); @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) QDict *resp; char *error; - assert_has_feature(qts, "host", "aarch64"); - assert_has_feature(qts, "host", "pmu"); + assert_has_feature_enabled(qts, "host", "aarch64"); + assert_has_feature_enabled(qts, "host", "pmu"); assert_error(qts, "cortex-a15", "We cannot guarantee the CPU type 'cortex-a15' works " -- 2.20.1 From: Andrew Jones <drjones@redhat.com> When a VM is stopped (such as when it's paused) guest virtual time should stop counting. Otherwise, when the VM is resumed it will experience time jumps and its kernel may report soft lockups. Not counting virtual time while the VM is stopped has the side effect of making the guest's time appear to lag when compared with real time, and even with time derived from the physical counter. For this reason, this change, which is enabled by default, comes with a KVM CPU feature allowing it to be disabled, restoring legacy behavior. This patch only provides the implementation of the virtual time adjustment. A subsequent patch will provide the CPU property allowing the change to be enabled and disabled. Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-6-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 ++++ target/arm/kvm_arm.h | 38 ++++++++++++++++++ target/arm/kvm.c | 92 ++++++++++++++++++++++++++++++++++++++++++++ target/arm/kvm32.c | 3 ++ target/arm/kvm64.c | 3 ++ target/arm/machine.c | 7 ++++ 6 files changed, 150 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* KVM init features for this CPU */ uint32_t kvm_init_features[7]; + /* KVM CPU state */ + + /* KVM virtual time adjustment */ + bool kvm_adjvtime; + bool kvm_vtime_dirty; + uint64_t kvm_vtime; + /* Uniprocessor system with MP extensions */ bool mp_is_up; diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level); */ bool write_kvmstate_to_list(ARMCPU *cpu); +/** + * kvm_arm_cpu_pre_save: + * @cpu: ARMCPU + * + * Called after write_kvmstate_to_list() from cpu_pre_save() to update + * the cpreg list with KVM CPU state. + */ +void kvm_arm_cpu_pre_save(ARMCPU *cpu); + +/** + * kvm_arm_cpu_post_load: + * @cpu: ARMCPU + * + * Called from cpu_post_load() to update KVM CPU state from the cpreg list. + */ +void kvm_arm_cpu_post_load(ARMCPU *cpu); + /** * kvm_arm_reset_vcpu: * @cpu: ARMCPU @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_kvm(ARMCPU *cpu); */ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu); +/** + * kvm_arm_get_virtual_time: + * @cs: CPUState + * + * Gets the VCPU's virtual counter and stores it in the KVM CPU state. + */ +void kvm_arm_get_virtual_time(CPUState *cs); + +/** + * kvm_arm_put_virtual_time: + * @cs: CPUState + * + * Sets the VCPU's virtual counter to the value stored in the KVM CPU state. + */ +void kvm_arm_put_virtual_time(CPUState *cs); + +void kvm_arm_vm_state_change(void *opaque, int running, RunState state); + int kvm_arm_vgic_probe(void); void kvm_arm_pmu_set_irq(CPUState *cs, int irq); @@ -XXX,XX +XXX,XX @@ static inline void kvm_arm_pmu_set_irq(CPUState *cs, int irq) {} static inline void kvm_arm_pmu_init(CPUState *cs) {} static inline void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map) {} + +static inline void kvm_arm_get_virtual_time(CPUState *cs) {} +static inline void kvm_arm_put_virtual_time(CPUState *cs) {} #endif static inline const char *gic_class_name(void) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ static int compare_u64(const void *a, const void *b) return 0; } +/* + * cpreg_values are sorted in ascending order by KVM register ID + * (see kvm_arm_init_cpreg_list). This allows us to cheaply find + * the storage for a KVM register by ID with a binary search. + */ +static uint64_t *kvm_arm_get_cpreg_ptr(ARMCPU *cpu, uint64_t regidx) +{ + uint64_t *res; + + res = bsearch(&regidx, cpu->cpreg_indexes, cpu->cpreg_array_len, + sizeof(uint64_t), compare_u64); + assert(res); + + return &cpu->cpreg_values[res - cpu->cpreg_indexes]; +} + /* Initialize the ARMCPU cpreg list according to the kernel's * definition of what CPU registers it knows about (and throw away * the previous TCG-created cpreg list). @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) return ok; } +void kvm_arm_cpu_pre_save(ARMCPU *cpu) +{ + /* KVM virtual time adjustment */ + if (cpu->kvm_vtime_dirty) { + *kvm_arm_get_cpreg_ptr(cpu, KVM_REG_ARM_TIMER_CNT) = cpu->kvm_vtime; + } +} + +void kvm_arm_cpu_post_load(ARMCPU *cpu) +{ + /* KVM virtual time adjustment */ + if (cpu->kvm_adjvtime) { + cpu->kvm_vtime = *kvm_arm_get_cpreg_ptr(cpu, KVM_REG_ARM_TIMER_CNT); + cpu->kvm_vtime_dirty = true; + } +} + void kvm_arm_reset_vcpu(ARMCPU *cpu) { int ret; @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu) return 0; } +void kvm_arm_get_virtual_time(CPUState *cs) +{ + ARMCPU *cpu = ARM_CPU(cs); + struct kvm_one_reg reg = { + .id = KVM_REG_ARM_TIMER_CNT, + .addr = (uintptr_t)&cpu->kvm_vtime, + }; + int ret; + + if (cpu->kvm_vtime_dirty) { + return; + } + + ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + if (ret) { + error_report("Failed to get KVM_REG_ARM_TIMER_CNT"); + abort(); + } + + cpu->kvm_vtime_dirty = true; +} + +void kvm_arm_put_virtual_time(CPUState *cs) +{ + ARMCPU *cpu = ARM_CPU(cs); + struct kvm_one_reg reg = { + .id = KVM_REG_ARM_TIMER_CNT, + .addr = (uintptr_t)&cpu->kvm_vtime, + }; + int ret; + + if (!cpu->kvm_vtime_dirty) { + return; + } + + ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + if (ret) { + error_report("Failed to set KVM_REG_ARM_TIMER_CNT"); + abort(); + } + + cpu->kvm_vtime_dirty = false; +} + int kvm_put_vcpu_events(ARMCPU *cpu) { CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ MemTxAttrs kvm_arch_post_run(CPUState *cs, struct kvm_run *run) return MEMTXATTRS_UNSPECIFIED; } +void kvm_arm_vm_state_change(void *opaque, int running, RunState state) +{ + CPUState *cs = opaque; + ARMCPU *cpu = ARM_CPU(cs); + + if (running) { + if (cpu->kvm_adjvtime) { + kvm_arm_put_virtual_time(cs); + } + } else { + if (cpu->kvm_adjvtime) { + kvm_arm_get_virtual_time(cs); + } + } +} int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) { diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "qemu/timer.h" +#include "sysemu/runstate.h" #include "sysemu/kvm.h" #include "kvm_arm.h" #include "internals.h" @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) return -EINVAL; } + qemu_add_vm_change_state_handler(kvm_arm_vm_state_change, cs); + /* Determine init features for this CPU */ memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features)); if (cpu->start_powered_off) { diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "exec/gdbstub.h" +#include "sysemu/runstate.h" #include "sysemu/kvm.h" #include "sysemu/kvm_int.h" #include "kvm_arm.h" @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) return -EINVAL; } + qemu_add_vm_change_state_handler(kvm_arm_vm_state_change, cs); + /* Determine init features for this CPU */ memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features)); if (cpu->start_powered_off) { diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_pre_save(void *opaque) /* This should never fail */ abort(); } + + /* + * kvm_arm_cpu_pre_save() must be called after + * write_kvmstate_to_list() + */ + kvm_arm_cpu_pre_save(cpu); } else { if (!write_cpustate_to_list(cpu, false)) { /* This should never fail. */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) * we're using it. */ write_list_to_cpustate(cpu); + kvm_arm_cpu_post_load(cpu); } else { if (!write_list_to_cpustate(cpu)) { return -1; -- 2.20.1 From: Andrew Jones <drjones@redhat.com> kvm-no-adjvtime is a KVM specific CPU property and a first of its kind. To accommodate it we also add kvm_arm_add_vcpu_properties() and a KVM specific CPU properties description to the CPU features document. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-7-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + target/arm/kvm_arm.h | 11 ++++++++++ hw/arm/virt.c | 8 ++++++++ target/arm/cpu.c | 2 ++ target/arm/cpu64.c | 1 + target/arm/kvm.c | 28 +++++++++++++++++++++++++ target/arm/monitor.c | 1 + tests/qtest/arm-cpu-features.c | 4 ++++ docs/arm-cpu-features.rst | 37 +++++++++++++++++++++++++++++++++- 9 files changed, 92 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef struct { bool smbios_old_sys_ver; bool no_highmem_ecam; bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */ + bool kvm_no_adjvtime; } VirtMachineClass; typedef struct { diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map); */ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu); +/** + * kvm_arm_add_vcpu_properties: + * @obj: The CPU object to add the properties to + * + * Add all KVM specific CPU properties to the CPU object. These + * are the CPU properties with "kvm-" prefixed names. + */ +void kvm_arm_add_vcpu_properties(Object *obj); + /** * kvm_arm_aarch32_supported: * @cs: CPUState @@ -XXX,XX +XXX,XX @@ static inline void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) cpu->host_cpu_probe_failed = true; } +static inline void kvm_arm_add_vcpu_properties(Object *obj) {} + static inline bool kvm_arm_aarch32_supported(CPUState *cs) { return false; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) } } + if (vmc->kvm_no_adjvtime && + object_property_find(cpuobj, "kvm-no-adjvtime", NULL)) { + object_property_set_bool(cpuobj, true, "kvm-no-adjvtime", NULL); + } + if (vmc->no_pmu && object_property_find(cpuobj, "pmu", NULL)) { object_property_set_bool(cpuobj, false, "pmu", NULL); } @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 0) static void virt_machine_4_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_5_0_options(mc); compat_props_add(mc->compat_props, hw_compat_4_2, hw_compat_4_2_len); + vmc->kvm_no_adjvtime = true; } DEFINE_VIRT_MACHINE(4, 2) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) if (kvm_enabled()) { kvm_arm_set_cpu_features_from_host(cpu); + kvm_arm_add_vcpu_properties(obj); } else { cortex_a15_initfn(obj); @@ -XXX,XX +XXX,XX @@ static void arm_host_initfn(Object *obj) if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { aarch64_add_sve_properties(obj); } + kvm_arm_add_vcpu_properties(obj); arm_cpu_post_init(obj); } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) if (kvm_enabled()) { kvm_arm_set_cpu_features_from_host(cpu); + kvm_arm_add_vcpu_properties(obj); } else { uint64_t t; uint32_t u; diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qemu/error-report.h" #include "qemu/main-loop.h" +#include "qom/object.h" +#include "qapi/error.h" #include "sysemu/sysemu.h" #include "sysemu/kvm.h" #include "sysemu/kvm_int.h" @@ -XXX,XX +XXX,XX @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) env->features = arm_host_cpu_features.features; } +static bool kvm_no_adjvtime_get(Object *obj, Error **errp) +{ + return !ARM_CPU(obj)->kvm_adjvtime; +} + +static void kvm_no_adjvtime_set(Object *obj, bool value, Error **errp) +{ + ARM_CPU(obj)->kvm_adjvtime = !value; +} + +/* KVM VCPU properties should be prefixed with "kvm-". */ +void kvm_arm_add_vcpu_properties(Object *obj) +{ + if (!kvm_enabled()) { + return; + } + + ARM_CPU(obj)->kvm_adjvtime = true; + object_property_add_bool(obj, "kvm-no-adjvtime", kvm_no_adjvtime_get, + kvm_no_adjvtime_set, &error_abort); + object_property_set_description(obj, "kvm-no-adjvtime", + "Set on to disable the adjustment of " + "the virtual counter. VM stopped time " + "will be counted.", &error_abort); +} + bool kvm_arm_pmu_supported(CPUState *cpu) { return kvm_check_extension(cpu->kvm_state, KVM_CAP_ARM_PMU_V3); diff --git a/target/arm/monitor.c b/target/arm/monitor.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/monitor.c +++ b/target/arm/monitor.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_model_advertised_features[] = { "sve128", "sve256", "sve384", "sve512", "sve640", "sve768", "sve896", "sve1024", "sve1152", "sve1280", "sve1408", "sve1536", "sve1664", "sve1792", "sve1920", "sve2048", + "kvm-no-adjvtime", NULL }; diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_has_feature_enabled(qts, "cortex-a15", "pmu"); assert_has_not_feature(qts, "cortex-a15", "aarch64"); + assert_has_not_feature(qts, "max", "kvm-no-adjvtime"); + if (g_str_equal(qtest_get_arch(), "aarch64")) { assert_has_feature_enabled(qts, "max", "aarch64"); assert_has_feature_enabled(qts, "max", "sve"); @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) return; } + assert_has_feature_disabled(qts, "host", "kvm-no-adjvtime"); + if (g_str_equal(qtest_get_arch(), "aarch64")) { bool kvm_supports_sve; char max_name[8], name[8]; diff --git a/docs/arm-cpu-features.rst b/docs/arm-cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/arm-cpu-features.rst +++ b/docs/arm-cpu-features.rst @@ -XXX,XX +XXX,XX @@ supporting the feature or only supporting the feature under certain configurations. For example, the `aarch64` CPU feature, which, when disabled, enables the optional AArch32 CPU feature, is only supported when using the KVM accelerator and when running on a host CPU type that -supports the feature. +supports the feature. While `aarch64` currently only works with KVM, +it could work with TCG. CPU features that are specific to KVM are +prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing =================== @@ -XXX,XX +XXX,XX @@ disabling many SVE vector lengths would be quite verbose, the `sve<N>` CPU properties have special semantics (see "SVE CPU Property Parsing Semantics"). +KVM VCPU Features +================= + +KVM VCPU features are CPU features that are specific to KVM, such as +paravirt features or features that enable CPU virtualization extensions. +The features' CPU properties are only available when KVM is enabled and +are named with the prefix "kvm-". KVM VCPU features may be probed, +enabled, and disabled in the same way as other CPU features. Below is +the list of KVM VCPU features and their descriptions. + + kvm-no-adjvtime By default kvm-no-adjvtime is disabled. This + means that by default the virtual time + adjustment is enabled (vtime is *not not* + adjusted). + + When virtual time adjustment is enabled each + time the VM transitions back to running state + the VCPU's virtual counter is updated to ensure + stopped time is not counted. This avoids time + jumps surprising guest OSes and applications, + as long as they use the virtual counter for + timekeeping. However it has the side effect of + the virtual and physical counters diverging. + All timekeeping based on the virtual counter + will appear to lag behind any timekeeping that + does not subtract VM stopped time. The guest + may resynchronize its virtual counter with + other time sources as needed. + + Enable kvm-no-adjvtime to disable virtual time + adjustment, also restoring the legacy (pre-5.0) + behavior. + SVE CPU Properties ================== -- 2.20.1 The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1