[PATCH v2 04/12] travis.yml: Install genisoimage package

Alex Bennée posted 12 patches 5 years, 9 months ago
Maintainers: Thomas Huth <thuth@redhat.com>, "Alex Bennée" <alex.bennee@linaro.org>, "Philippe Mathieu-Daudé" <philmd@redhat.com>, Fam Zheng <fam@euphon.net>
[PATCH v2 04/12] travis.yml: Install genisoimage package
Posted by Alex Bennée 5 years, 9 months ago
From: Wainer dos Santos Moschetta <wainersm@redhat.com>

The genisoimage program is required for tests/cdrom-test
tests, otherwise they are skipped. The current Travis
environments do not provide it by default, so let's
explicitly require the genisoimage package.

Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200110191254.11303-2-wainersm@redhat.com>
---
 .travis.yml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/.travis.yml b/.travis.yml
index 1ae645e9fc..e75c979b6c 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -51,6 +51,8 @@ addons:
       - sparse
       - uuid-dev
       - gcovr
+      # Tests dependencies
+      - genisoimage
 
 
 # The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu
@@ -383,6 +385,8 @@ matrix:
           - libusb-1.0-0-dev
           - libvdeplug-dev
           - libvte-2.91-dev
+          # Tests dependencies
+          - genisoimage
       env:
         - TEST_CMD="make check check-tcg V=1"
         - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS}"
@@ -412,6 +416,8 @@ matrix:
           - libusb-1.0-0-dev
           - libvdeplug-dev
           - libvte-2.91-dev
+          # Tests dependencies
+          - genisoimage
       env:
         - TEST_CMD="make check check-tcg V=1"
         - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},ppc64le-linux-user"
@@ -441,6 +447,8 @@ matrix:
           - libusb-1.0-0-dev
           - libvdeplug-dev
           - libvte-2.91-dev
+          # Tests dependencies
+          - genisoimage
       env:
         - TEST_CMD="make check check-tcg V=1"
         - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},s390x-linux-user"
-- 
2.20.1


Re: [PATCH v2 04/12] travis.yml: Install genisoimage package
Posted by Philippe Mathieu-Daudé 5 years, 9 months ago
On 1/30/20 12:32 PM, Alex Bennée wrote:
> From: Wainer dos Santos Moschetta <wainersm@redhat.com>
> 
> The genisoimage program is required for tests/cdrom-test
> tests, otherwise they are skipped. The current Travis
> environments do not provide it by default, so let's
> explicitly require the genisoimage package.
> 
> Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
> Message-Id: <20200110191254.11303-2-wainersm@redhat.com>
> ---
>   .travis.yml | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/.travis.yml b/.travis.yml
> index 1ae645e9fc..e75c979b6c 100644
> --- a/.travis.yml
> +++ b/.travis.yml
> @@ -51,6 +51,8 @@ addons:
>         - sparse
>         - uuid-dev
>         - gcovr
> +      # Tests dependencies
> +      - genisoimage
>   
>   
>   # The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu
> @@ -383,6 +385,8 @@ matrix:
>             - libusb-1.0-0-dev
>             - libvdeplug-dev
>             - libvte-2.91-dev
> +          # Tests dependencies
> +          - genisoimage
>         env:
>           - TEST_CMD="make check check-tcg V=1"
>           - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS}"
> @@ -412,6 +416,8 @@ matrix:
>             - libusb-1.0-0-dev
>             - libvdeplug-dev
>             - libvte-2.91-dev
> +          # Tests dependencies
> +          - genisoimage
>         env:
>           - TEST_CMD="make check check-tcg V=1"
>           - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},ppc64le-linux-user"
> @@ -441,6 +447,8 @@ matrix:
>             - libusb-1.0-0-dev
>             - libvdeplug-dev
>             - libvte-2.91-dev
> +          # Tests dependencies
> +          - genisoimage
>         env:
>           - TEST_CMD="make check check-tcg V=1"
>           - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},s390x-linux-user"
> 

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>


Re: [PATCH v2 04/12] travis.yml: Install genisoimage package
Posted by Thomas Huth 5 years, 9 months ago
On 30/01/2020 12.32, Alex Bennée wrote:
> From: Wainer dos Santos Moschetta <wainersm@redhat.com>
> 
> The genisoimage program is required for tests/cdrom-test
> tests, otherwise they are skipped. The current Travis
> environments do not provide it by default, so let's
> explicitly require the genisoimage package.
> 
> Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
> Message-Id: <20200110191254.11303-2-wainersm@redhat.com>
> ---
>  .travis.yml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/.travis.yml b/.travis.yml
> index 1ae645e9fc..e75c979b6c 100644
> --- a/.travis.yml
> +++ b/.travis.yml
> @@ -51,6 +51,8 @@ addons:
>        - sparse
>        - uuid-dev
>        - gcovr
> +      # Tests dependencies
> +      - genisoimage
>  
>  
>  # The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu
> @@ -383,6 +385,8 @@ matrix:
>            - libusb-1.0-0-dev
>            - libvdeplug-dev
>            - libvte-2.91-dev
> +          # Tests dependencies
> +          - genisoimage
>        env:
>          - TEST_CMD="make check check-tcg V=1"
>          - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS}"
> @@ -412,6 +416,8 @@ matrix:
>            - libusb-1.0-0-dev
>            - libvdeplug-dev
>            - libvte-2.91-dev
> +          # Tests dependencies
> +          - genisoimage
>        env:
>          - TEST_CMD="make check check-tcg V=1"
>          - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},ppc64le-linux-user"
> @@ -441,6 +447,8 @@ matrix:
>            - libusb-1.0-0-dev
>            - libvdeplug-dev
>            - libvte-2.91-dev
> +          # Tests dependencies
> +          - genisoimage
>        env:
>          - TEST_CMD="make check check-tcg V=1"
>          - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},s390x-linux-user"
> 

Reviewed-by: Thomas Huth <thuth@redhat.com>