From: Philippe Mathieu-Daudé <f4bug@amsat.org>
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
[...]
console: ahci-sunxi 1c18000.sata: Linked as a consumer to regulator.4
console: ahci-sunxi 1c18000.sata: controller can't do 64bit DMA, forcing 32bit
console: ahci-sunxi 1c18000.sata: AHCI 0001.0000 32 slots 1 ports 1.5 Gbps 0x1 impl platform mode
console: ahci-sunxi 1c18000.sata: flags: ncq only
console: scsi host0: ahci-sunxi
console: ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 27
console: of_cfs_init
console: of_cfs_init: OK
console: vcc3v0: disabling
console: vcc5v0: disabling
console: usb1-vbus: disabling
console: usb2-vbus: disabling
console: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
console: ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
console: ata1.00: 40960 sectors, multi 16: LBA48 NCQ (depth 32)
console: ata1.00: applying bridge limits
console: ata1.00: configured for UDMA/100
console: scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
console: sd 0:0:0:0: Attached scsi generic sg0 type 0
console: sd 0:0:0:0: [sda] 40960 512-byte logical blocks: (21.0 MB/20.0 MiB)
console: sd 0:0:0:0: [sda] Write Protect is off
console: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
console: sd 0:0:0:0: [sda] Attached SCSI disk
console: EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
console: EXT4-fs (sda): mounted filesystem without journal. Opts: (null)
console: VFS: Mounted root (ext2 filesystem) readonly on device 8:0.
[...]
console: cat /proc/partitions
console: / # cat /proc/partitions
console: major minor #blocks name
console: 1 0 4096 ram0
console: 1 1 4096 ram1
console: 1 2 4096 ram2
console: 1 3 4096 ram3
console: 8 0 20480 sda
console: reboot
console: / # reboot
[...]
console: sd 0:0:0:0: [sda] Synchronizing SCSI cache
console: reboot: Restarting system
PASS (48.39 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tests/acceptance/boot_linux_console.py | 44 ++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index 4643f60e376..e40b84651b0 100644
@@ -441,6 +441,50 @@ class BootLinuxConsole(Test):
exec_command_and_wait_for_pattern(self, 'reboot',
'reboot: Restarting system')
+ def test_arm_cubieboard_sata(self):
+ """
+ :avocado: tags=arch:arm
+ :avocado: tags=machine:cubieboard
+ """
+ deb_url = ('https://apt.armbian.com/pool/main/l/'
+ 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb')
+ deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315'
+ deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ kernel_path = self.extract_from_deb(deb_path,
+ '/boot/vmlinuz-4.20.7-sunxi')
+ dtb_path = '/usr/lib/linux-image-dev-sunxi/sun4i-a10-cubieboard.dtb'
+ dtb_path = self.extract_from_deb(deb_path, dtb_path)
+ rootfs_url = ('https://github.com/groeck/linux-build-test/raw/'
+ '2eb0a73b5d5a28df3170c546ddaaa9757e1e0848/rootfs/'
+ 'arm/rootfs-armv5.ext2.gz')
+ rootfs_hash = '093e89d2b4d982234bf528bc9fb2f2f17a9d1f93'
+ rootfs_path_gz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash)
+ rootfs_path = os.path.join(self.workdir, 'rootfs.cpio')
+ archive.gzip_uncompress(rootfs_path_gz, rootfs_path)
+
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'console=ttyS0,115200 '
+ 'usbcore.nousb '
+ 'root=/dev/sda ro '
+ 'panic=-1 noreboot')
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-drive', 'if=none,format=raw,id=disk0,file='
+ + rootfs_path,
+ '-device', 'ide-hd,bus=ide.0,drive=disk0',
+ '-append', kernel_command_line,
+ '-no-reboot')
+ self.vm.launch()
+ self.wait_for_console_pattern('Boot successful.')
+
+ exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo',
+ 'Allwinner sun4i/sun5i')
+ exec_command_and_wait_for_pattern(self, 'cat /proc/partitions',
+ 'sda')
+ exec_command_and_wait_for_pattern(self, 'reboot',
+ 'reboot: Restarting system')
+
def test_s390x_s390_ccw_virtio(self):
"""
:avocado: tags=arch:s390x
--
2.20.1