First arm pullreq of 5.0! The following changes since commit 084a398bf8aa7634738e6c6c0103236ee1b3b72f: Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging (2019-12-13 18:14:07 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191216-1 for you to fetch changes up to f80741d107673f162e3b097fc76a1590036cc9d1: target/arm: ensure we use current exception state after SCR update (2019-12-16 10:52:58 +0000) ---------------------------------------------------------------- target-arm queue: * Add support for Cortex-M7 CPU * exynos4210_gic: Suppress gcc9 format-truncation warnings * aspeed: Various minor bug fixes and improvements * aspeed: Add support for the tacoma-bmc board * Honour HCR_EL32.TID1 and .TID2 trapping requirements * Handle trapping to EL2 of AArch32 VMRS instructions * Handle AArch32 CP15 trapping via HSTR_EL2 * Add support for missing Jazelle system registers * arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on * Add support for DC CVAP & DC CVADP instructions * Fix assertion when SCR.NS is changed in Secure-SVC &c * enable SHPC native hot plug in arm ACPI ---------------------------------------------------------------- Alex Bennée (1): target/arm: ensure we use current exception state after SCR update Beata Michalska (4): tcg: cputlb: Add probe_read Memory: Enable writeback for given memory region migration: ram: Switch to ram block writeback target/arm: Add support for DC CVAP & DC CVADP ins Christophe Lyon (1): target/arm: Add support for cortex-m7 CPU Cédric Le Goater (12): aspeed/i2c: Add support for pool buffer transfers aspeed/i2c: Check SRAM enablement on AST2500 aspeed: Add a DRAM memory region at the SoC level aspeed/i2c: Add support for DMA transfers aspeed/i2c: Add trace events aspeed/smc: Restore default AHB window mapping at reset aspeed/smc: Do not map disabled segment on the AST2600 aspeed/smc: Add AST2600 timings registers aspeed: Remove AspeedBoardConfig array and use AspeedMachineClass aspeed: Add support for the tacoma-bmc board aspeed: Change the "scu" property definition aspeed: Change the "nic" property definition David Gibson (1): exynos4210_gic: Suppress gcc9 format-truncation warnings Heyi Guo (2): hw/arm/acpi: simplify AML bit and/or statement hw/arm/acpi: enable SHPC native hot plug Joel Stanley (4): aspeed/sdmc: Make ast2600 default 1G aspeed/scu: Fix W1C behavior watchdog/aspeed: Improve watchdog timeout message watchdog/aspeed: Fix AST2600 frequency behaviour Marc Zyngier (5): target/arm: Honor HCR_EL2.TID2 trapping requirements target/arm: Honor HCR_EL2.TID1 trapping requirements target/arm: Handle trapping to EL2 of AArch32 VMRS instructions target/arm: Handle AArch32 CP15 trapping via HSTR_EL2 target/arm: Add support for missing Jazelle system registers Niek Linnenbank (1): arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on() PanNengyuan (1): gpio: fix memory leak in aspeed_gpio_init() Philippe Mathieu-Daudé (2): hw/arm/sbsa-ref: Simplify by moving the gic in the machine state hw/arm/virt: Simplify by moving the gic in the machine state include/exec/exec-all.h | 6 + include/exec/memory.h | 6 + include/exec/ram_addr.h | 8 + include/hw/arm/aspeed.h | 24 +-- include/hw/arm/aspeed_soc.h | 1 + include/hw/arm/virt.h | 1 + include/hw/i2c/aspeed_i2c.h | 16 ++ include/hw/ssi/aspeed_smc.h | 1 + include/hw/watchdog/wdt_aspeed.h | 1 + include/qemu/cutils.h | 1 + target/arm/cpu.h | 20 +- target/arm/helper.h | 3 + target/arm/translate.h | 2 + exec.c | 36 ++++ hw/arm/aspeed.c | 271 +++++++++++++---------- hw/arm/aspeed_ast2600.c | 25 ++- hw/arm/aspeed_soc.c | 22 +- hw/arm/sbsa-ref.c | 86 ++++---- hw/arm/virt-acpi-build.c | 21 +- hw/arm/virt.c | 109 +++++----- hw/gpio/aspeed_gpio.c | 1 + hw/i2c/aspeed_i2c.c | 439 +++++++++++++++++++++++++++++++++++--- hw/intc/exynos4210_gic.c | 9 +- hw/misc/aspeed_scu.c | 19 +- hw/misc/aspeed_sdmc.c | 6 +- hw/net/ftgmac100.c | 19 +- hw/ssi/aspeed_smc.c | 63 ++++-- hw/timer/aspeed_timer.c | 17 +- hw/watchdog/wdt_aspeed.c | 41 ++-- linux-user/elfload.c | 2 + memory.c | 12 ++ migration/ram.c | 5 +- target/arm/arm-powerctl.c | 3 + target/arm/cpu.c | 33 +++ target/arm/cpu64.c | 1 + target/arm/helper.c | 170 ++++++++++++++- target/arm/op_helper.c | 22 ++ target/arm/translate-vfp.inc.c | 20 +- target/arm/translate.c | 9 +- target/arm/vfp_helper.c | 29 +++ util/cutils.c | 38 ++++ hw/i2c/trace-events | 9 + tests/data/acpi/virt/DSDT | Bin 18470 -> 18462 bytes tests/data/acpi/virt/DSDT.memhp | Bin 19807 -> 19799 bytes tests/data/acpi/virt/DSDT.numamem | Bin 18470 -> 18462 bytes 45 files changed, 1273 insertions(+), 354 deletions(-) From: Christophe Lyon <christophe.lyon@linaro.org> This is derived from cortex-m4 description, adding DP support and FPv5 instructions with the corresponding flags in isar and mvfr2. Checked that it could successfully execute vrinta.f32 s15, s15 while cortex-m4 emulation rejects it with "illegal instruction". Signed-off-by: Christophe Lyon <christophe.lyon@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20191025090841.10299-1-christophe.lyon@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) cpu->isar.id_isar6 = 0x00000000; } +static void cortex_m7_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V7); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); + cpu->midr = 0x411fc272; /* r1p2 */ + cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12000011; + cpu->isar.mvfr2 = 0x00000040; + cpu->id_pfr0 = 0x00000030; + cpu->id_pfr1 = 0x00000200; + cpu->id_dfr0 = 0x00100000; + cpu->id_afr0 = 0x00000000; + cpu->id_mmfr0 = 0x00100030; + cpu->id_mmfr1 = 0x00000000; + cpu->id_mmfr2 = 0x01000000; + cpu->id_mmfr3 = 0x00000000; + cpu->isar.id_isar0 = 0x01101110; + cpu->isar.id_isar1 = 0x02112000; + cpu->isar.id_isar2 = 0x20232231; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; +} + static void cortex_m33_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m7", .initfn = cortex_m7_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-m33", .initfn = cortex_m33_initfn, .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, -- 2.20.1 From: David Gibson <david@gibson.dropbear.id.au> exynos4210_gic_realize() prints the number of cpus into some temporary buffers, but it only allows 3 bytes space for it. That's plenty: existing machines will only ever set this value to EXYNOS4210_NCPUS (2). But the compiler can't always figure that out, so some[*] gcc9 versions emit -Wformat-truncation warnings. We can fix that by hinting the constraint to the compiler with a suitably placed assert(). [*] The bizarre thing here, is that I've long gotten these warnings compiling in a 32-bit x86 container as host - Fedora 30 with gcc-9.2.1-1.fc30.i686 - but it compiles just fine on my normal x86_64 host - Fedora 30 with and gcc-9.2.1-1.fc30.x86_64. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: deleted stray blank line] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/exynos4210_gic.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_gic_realize(DeviceState *dev, Error **errp) char cpu_alias_name[sizeof(cpu_prefix) + 3]; char dist_alias_name[sizeof(cpu_prefix) + 3]; SysBusDevice *gicbusdev; + uint32_t n = s->num_cpu; uint32_t i; s->gic = qdev_create(NULL, "arm_gic"); @@ -XXX,XX +XXX,XX @@ static void exynos4210_gic_realize(DeviceState *dev, Error **errp) memory_region_init(&s->dist_container, obj, "exynos4210-dist-container", EXYNOS4210_EXT_GIC_DIST_REGION_SIZE); - for (i = 0; i < s->num_cpu; i++) { + /* + * This clues in gcc that our on-stack buffers do, in fact have + * enough room for the cpu numbers. gcc 9.2.1 on 32-bit x86 + * doesn't figure this out, otherwise and gives spurious warnings. + */ + assert(n <= EXYNOS4210_NCPUS); + for (i = 0; i < n; i++) { /* Map CPU interface per SMP Core */ sprintf(cpu_alias_name, "%s%x", cpu_prefix, i); memory_region_init_alias(&s->cpu_alias[i], obj, -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed I2C controller can operate in different transfer modes : - Byte Buffer mode, using a dedicated register to transfer a byte. This is what the model supports today. - Pool Buffer mode, using an internal SRAM to transfer multiple bytes in the same command sequence. Each SoC has different SRAM characteristics. On the AST2400, 2048 bytes of SRAM are available at offset 0x800 of the controller AHB window. The pool buffer can be configured from 1 to 256 bytes per bus. On the AST2500, the SRAM is at offset 0x200 and the pool buffer is of 16 bytes per bus. On the AST2600, the SRAM is at offset 0xC00 and the pool buffer is of 32 bytes per bus. It can be splitted in two for TX and RX but the current model does not add support for it as it it unused by known drivers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/aspeed_i2c.h | 8 ++ hw/i2c/aspeed_i2c.c | 197 ++++++++++++++++++++++++++++++++---- 2 files changed, 186 insertions(+), 19 deletions(-) diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/aspeed_i2c.h +++ b/include/hw/i2c/aspeed_i2c.h @@ -XXX,XX +XXX,XX @@ OBJECT_CHECK(AspeedI2CState, (obj), TYPE_ASPEED_I2C) #define ASPEED_I2C_NR_BUSSES 16 +#define ASPEED_I2C_MAX_POOL_SIZE 0x800 struct AspeedI2CState; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CBus { uint32_t intr_status; uint32_t cmd; uint32_t buf; + uint32_t pool_ctrl; } AspeedI2CBus; typedef struct AspeedI2CState { @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CState { qemu_irq irq; uint32_t intr_status; + MemoryRegion pool_iomem; + uint8_t pool[ASPEED_I2C_MAX_POOL_SIZE]; AspeedI2CBus busses[ASPEED_I2C_NR_BUSSES]; } AspeedI2CState; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CClass { uint8_t reg_size; uint8_t gap; qemu_irq (*bus_get_irq)(AspeedI2CBus *); + + uint64_t pool_size; + hwaddr pool_base; + uint8_t *(*bus_pool_base)(AspeedI2CBus *); } AspeedI2CClass; I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr); diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ /* I2C Device (Bus) Register */ #define I2CD_FUN_CTRL_REG 0x00 /* I2CD Function Control */ -#define I2CD_BUFF_SEL_MASK (0x7 << 20) -#define I2CD_BUFF_SEL(x) (x << 20) +#define I2CD_POOL_PAGE_SEL(x) (((x) >> 20) & 0x7) /* AST2400 */ #define I2CD_M_SDA_LOCK_EN (0x1 << 16) #define I2CD_MULTI_MASTER_DIS (0x1 << 15) #define I2CD_M_SCL_DRIVE_EN (0x1 << 14) @@ -XXX,XX +XXX,XX @@ #define I2CD_SCL_O_OUT_DIR (0x1 << 12) #define I2CD_BUS_RECOVER_CMD_EN (0x1 << 11) #define I2CD_S_ALT_EN (0x1 << 10) -#define I2CD_RX_DMA_ENABLE (0x1 << 9) -#define I2CD_TX_DMA_ENABLE (0x1 << 8) /* Command Bit */ +#define I2CD_RX_DMA_ENABLE (0x1 << 9) +#define I2CD_TX_DMA_ENABLE (0x1 << 8) +#define I2CD_RX_BUFF_ENABLE (0x1 << 7) +#define I2CD_TX_BUFF_ENABLE (0x1 << 6) #define I2CD_M_STOP_CMD (0x1 << 5) #define I2CD_M_S_RX_CMD_LAST (0x1 << 4) #define I2CD_M_RX_CMD (0x1 << 3) @@ -XXX,XX +XXX,XX @@ #define I2CD_M_START_CMD (0x1) #define I2CD_DEV_ADDR_REG 0x18 /* Slave Device Address */ -#define I2CD_BUF_CTRL_REG 0x1c /* Pool Buffer Control */ +#define I2CD_POOL_CTRL_REG 0x1c /* Pool Buffer Control */ +#define I2CD_POOL_RX_COUNT(x) (((x) >> 24) & 0xff) +#define I2CD_POOL_RX_SIZE(x) ((((x) >> 16) & 0xff) + 1) +#define I2CD_POOL_TX_COUNT(x) ((((x) >> 8) & 0xff) + 1) +#define I2CD_POOL_OFFSET(x) (((x) & 0x3f) << 2) /* AST2400 */ #define I2CD_BYTE_BUF_REG 0x20 /* Transmit/Receive Byte Buffer */ #define I2CD_BYTE_BUF_TX_SHIFT 0 #define I2CD_BYTE_BUF_TX_MASK 0xff @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, return bus->intr_ctrl; case I2CD_INTR_STS_REG: return bus->intr_status; + case I2CD_POOL_CTRL_REG: + return bus->pool_ctrl; case I2CD_BYTE_BUF_REG: return bus->buf; case I2CD_CMD_REG: @@ -XXX,XX +XXX,XX @@ static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus) return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK; } +static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) +{ + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + int ret = -1; + int i; + + if (bus->cmd & I2CD_TX_BUFF_ENABLE) { + for (i = pool_start; i < I2CD_POOL_TX_COUNT(bus->pool_ctrl); i++) { + uint8_t *pool_base = aic->bus_pool_base(bus); + + ret = i2c_send(bus->bus, pool_base[i]); + if (ret) { + break; + } + } + bus->cmd &= ~I2CD_TX_BUFF_ENABLE; + } else { + ret = i2c_send(bus->bus, bus->buf); + } + + return ret; +} + +static void aspeed_i2c_bus_recv(AspeedI2CBus *bus) +{ + AspeedI2CState *s = bus->controller; + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); + uint8_t data; + int i; + + if (bus->cmd & I2CD_RX_BUFF_ENABLE) { + uint8_t *pool_base = aic->bus_pool_base(bus); + + for (i = 0; i < I2CD_POOL_RX_SIZE(bus->pool_ctrl); i++) { + pool_base[i] = i2c_recv(bus->bus); + } + + /* Update RX count */ + bus->pool_ctrl &= ~(0xff << 24); + bus->pool_ctrl |= (i & 0xff) << 24; + bus->cmd &= ~I2CD_RX_BUFF_ENABLE; + } else { + data = i2c_recv(bus->bus); + bus->buf = (data & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; + } +} + static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus) { - uint8_t ret; - aspeed_i2c_set_state(bus, I2CD_MRXD); - ret = i2c_recv(bus->bus); + aspeed_i2c_bus_recv(bus); bus->intr_status |= I2CD_INTR_RX_DONE; - bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; if (bus->cmd & I2CD_M_S_RX_CMD_LAST) { i2c_nack(bus->bus); } @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus) aspeed_i2c_set_state(bus, I2CD_MACTIVE); } +static uint8_t aspeed_i2c_get_addr(AspeedI2CBus *bus) +{ + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + + if (bus->cmd & I2CD_TX_BUFF_ENABLE) { + uint8_t *pool_base = aic->bus_pool_base(bus); + + return pool_base[0]; + } else { + return bus->buf; + } +} + /* * The state machine needs some refinement. It is only used to track * invalid STOP commands for the moment. */ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { + uint8_t pool_start = 0; + bus->cmd &= ~0xFFFF; bus->cmd |= value & 0xFFFF; if (bus->cmd & I2CD_M_START_CMD) { uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? I2CD_MSTARTR : I2CD_MSTART; + uint8_t addr; aspeed_i2c_set_state(bus, state); - if (i2c_start_transfer(bus->bus, extract32(bus->buf, 1, 7), - extract32(bus->buf, 0, 1))) { + addr = aspeed_i2c_get_addr(bus); + + if (i2c_start_transfer(bus->bus, extract32(addr, 1, 7), + extract32(addr, 0, 1))) { bus->intr_status |= I2CD_INTR_TX_NAK; } else { bus->intr_status |= I2CD_INTR_TX_ACK; } - /* START command is also a TX command, as the slave address is - * sent on the bus */ - bus->cmd &= ~(I2CD_M_START_CMD | I2CD_M_TX_CMD); + bus->cmd &= ~I2CD_M_START_CMD; + + /* + * The START command is also a TX command, as the slave + * address is sent on the bus. Drop the TX flag if nothing + * else needs to be sent in this sequence. + */ + if (bus->cmd & I2CD_TX_BUFF_ENABLE) { + if (I2CD_POOL_TX_COUNT(bus->pool_ctrl) == 1) { + bus->cmd &= ~I2CD_M_TX_CMD; + } else { + /* + * Increase the start index in the TX pool buffer to + * skip the address byte. + */ + pool_start++; + } + } else { + bus->cmd &= ~I2CD_M_TX_CMD; + } /* No slave found */ if (!i2c_bus_busy(bus->bus)) { @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) if (bus->cmd & I2CD_M_TX_CMD) { aspeed_i2c_set_state(bus, I2CD_MTXD); - if (i2c_send(bus->bus, bus->buf)) { + if (aspeed_i2c_bus_send(bus, pool_start)) { bus->intr_status |= (I2CD_INTR_TX_NAK); i2c_end_transfer(bus->bus); } else { @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n", __func__); break; + case I2CD_POOL_CTRL_REG: + bus->pool_ctrl &= ~0xffffff; + bus->pool_ctrl |= (value & 0xffffff); + break; + case I2CD_BYTE_BUF_REG: bus->buf = (value & I2CD_BYTE_BUF_TX_MASK) << I2CD_BYTE_BUF_TX_SHIFT; break; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_i2c_ctrl_ops = { .endianness = DEVICE_LITTLE_ENDIAN, }; +static uint64_t aspeed_i2c_pool_read(void *opaque, hwaddr offset, + unsigned size) +{ + AspeedI2CState *s = opaque; + uint64_t ret = 0; + int i; + + for (i = 0; i < size; i++) { + ret |= (uint64_t) s->pool[offset + i] << (8 * i); + } + + return ret; +} + +static void aspeed_i2c_pool_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AspeedI2CState *s = opaque; + int i; + + for (i = 0; i < size; i++) { + s->pool[offset + i] = (value >> (8 * i)) & 0xFF; + } +} + +static const MemoryRegionOps aspeed_i2c_pool_ops = { + .read = aspeed_i2c_pool_read, + .write = aspeed_i2c_pool_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + }, +}; + static const VMStateDescription aspeed_i2c_bus_vmstate = { .name = TYPE_ASPEED_I2C, - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT8(id, AspeedI2CBus), VMSTATE_UINT32(ctrl, AspeedI2CBus), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription aspeed_i2c_bus_vmstate = { VMSTATE_UINT32(intr_status, AspeedI2CBus), VMSTATE_UINT32(cmd, AspeedI2CBus), VMSTATE_UINT32(buf, AspeedI2CBus), + VMSTATE_UINT32(pool_ctrl, AspeedI2CBus), VMSTATE_END_OF_LIST() } }; static const VMStateDescription aspeed_i2c_vmstate = { .name = TYPE_ASPEED_I2C, - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(intr_status, AspeedI2CState), VMSTATE_STRUCT_ARRAY(busses, AspeedI2CState, ASPEED_I2C_NR_BUSSES, 1, aspeed_i2c_bus_vmstate, AspeedI2CBus), + VMSTATE_UINT8_ARRAY(pool, AspeedI2CState, ASPEED_I2C_MAX_POOL_SIZE), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->iomem, aic->reg_size * (i + offset), &s->busses[i].mr); } + + memory_region_init_io(&s->pool_iomem, OBJECT(s), &aspeed_i2c_pool_ops, s, + "aspeed.i2c-pool", aic->pool_size); + memory_region_add_subregion(&s->iomem, aic->pool_base, &s->pool_iomem); } static void aspeed_i2c_class_init(ObjectClass *klass, void *data) @@ -XXX,XX +XXX,XX @@ static qemu_irq aspeed_2400_i2c_bus_get_irq(AspeedI2CBus *bus) return bus->controller->irq; } +static uint8_t *aspeed_2400_i2c_bus_pool_base(AspeedI2CBus *bus) +{ + uint8_t *pool_page = + &bus->controller->pool[I2CD_POOL_PAGE_SEL(bus->ctrl) * 0x100]; + + return &pool_page[I2CD_POOL_OFFSET(bus->pool_ctrl)]; +} + static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data) aic->reg_size = 0x40; aic->gap = 7; aic->bus_get_irq = aspeed_2400_i2c_bus_get_irq; + aic->pool_size = 0x800; + aic->pool_base = 0x800; + aic->bus_pool_base = aspeed_2400_i2c_bus_pool_base; } static const TypeInfo aspeed_2400_i2c_info = { @@ -XXX,XX +XXX,XX @@ static qemu_irq aspeed_2500_i2c_bus_get_irq(AspeedI2CBus *bus) return bus->controller->irq; } +static uint8_t *aspeed_2500_i2c_bus_pool_base(AspeedI2CBus *bus) +{ + return &bus->controller->pool[bus->id * 0x10]; +} + static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) aic->reg_size = 0x40; aic->gap = 7; aic->bus_get_irq = aspeed_2500_i2c_bus_get_irq; + aic->pool_size = 0x100; + aic->pool_base = 0x200; + aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base; } static const TypeInfo aspeed_2500_i2c_info = { @@ -XXX,XX +XXX,XX @@ static qemu_irq aspeed_2600_i2c_bus_get_irq(AspeedI2CBus *bus) return bus->irq; } +static uint8_t *aspeed_2600_i2c_bus_pool_base(AspeedI2CBus *bus) +{ + return &bus->controller->pool[bus->id * 0x20]; +} + static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data) aic->reg_size = 0x80; aic->gap = -1; /* no gap */ aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq; + aic->pool_size = 0x200; + aic->pool_base = 0xC00; + aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base; } static const TypeInfo aspeed_2600_i2c_info = { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The SRAM must be enabled before using the Buffer Pool mode or the DMA mode. This is not required on other SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/aspeed_i2c.h | 3 +++ hw/i2c/aspeed_i2c.c | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/aspeed_i2c.h +++ b/include/hw/i2c/aspeed_i2c.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CState { qemu_irq irq; uint32_t intr_status; + uint32_t ctrl_global; MemoryRegion pool_iomem; uint8_t pool[ASPEED_I2C_MAX_POOL_SIZE]; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CClass { uint64_t pool_size; hwaddr pool_base; uint8_t *(*bus_pool_base)(AspeedI2CBus *); + bool check_sram; + } AspeedI2CClass; I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr); diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ #define I2C_CTRL_STATUS 0x00 /* Device Interrupt Status */ #define I2C_CTRL_ASSIGN 0x08 /* Device Interrupt Target Assignment */ +#define I2C_CTRL_GLOBAL 0x0C /* Global Control Register */ +#define I2C_CTRL_SRAM_EN BIT(0) /* I2C Device (Bus) Register */ @@ -XXX,XX +XXX,XX @@ static uint8_t aspeed_i2c_get_addr(AspeedI2CBus *bus) } } +static bool aspeed_i2c_check_sram(AspeedI2CBus *bus) +{ + AspeedI2CState *s = bus->controller; + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); + + if (!aic->check_sram) { + return true; + } + + /* + * AST2500: SRAM must be enabled before using the Buffer Pool or + * DMA mode. + */ + if (!(s->ctrl_global & I2C_CTRL_SRAM_EN) && + (bus->cmd & (I2CD_RX_DMA_ENABLE | I2CD_TX_DMA_ENABLE | + I2CD_RX_BUFF_ENABLE | I2CD_TX_BUFF_ENABLE))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: SRAM is not enabled\n", __func__); + return false; + } + + return true; +} + /* * The state machine needs some refinement. It is only used to track * invalid STOP commands for the moment. @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->cmd &= ~0xFFFF; bus->cmd |= value & 0xFFFF; + if (!aspeed_i2c_check_sram(bus)) { + return; + } + if (bus->cmd & I2CD_M_START_CMD) { uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? I2CD_MSTARTR : I2CD_MSTART; @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_ctrl_read(void *opaque, hwaddr offset, switch (offset) { case I2C_CTRL_STATUS: return s->intr_status; + case I2C_CTRL_GLOBAL: + return s->ctrl_global; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_ctrl_read(void *opaque, hwaddr offset, static void aspeed_i2c_ctrl_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { + AspeedI2CState *s = opaque; + switch (offset) { + case I2C_CTRL_GLOBAL: + s->ctrl_global = value; + break; case I2C_CTRL_STATUS: default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) aic->pool_size = 0x100; aic->pool_base = 0x200; aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base; + aic->check_sram = true; } static const TypeInfo aspeed_2500_i2c_info = { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Currently, we link the DRAM memory region to the FMC model (for DMAs) through a property alias at the SoC level. The I2C model will need a similar region for DMA support, add a DRAM region property at the SoC level for both model to use. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 1 + hw/arm/aspeed_ast2600.c | 7 +++++-- hw/arm/aspeed_soc.c | 9 +++++++-- 3 files changed, 13 insertions(+), 4 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { ARMCPU cpu[ASPEED_CPUS_NUM]; uint32_t num_cpus; A15MPPrivState a7mpcore; + MemoryRegion *dram_mr; MemoryRegion sram; AspeedVICState vic; AspeedRtcState rtc; diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) typename); object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs", &error_abort); - object_property_add_alias(obj, "dram", OBJECT(&s->fmc), "dram", - &error_abort); for (i = 0; i < sc->spis_num; i++) { snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) } /* FMC, The number of CS is set at the board level */ + object_property_set_link(OBJECT(&s->fmc), OBJECT(s->dram_mr), "dram", &err); + if (err) { + error_propagate(errp, err); + return; + } object_property_set_int(OBJECT(&s->fmc), sc->memmap[ASPEED_SDRAM], "sdram-base", &err); if (err) { diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) typename); object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs", &error_abort); - object_property_add_alias(obj, "dram", OBJECT(&s->fmc), "dram", - &error_abort); for (i = 0; i < sc->spis_num; i++) { snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) aspeed_soc_get_irq(s, ASPEED_I2C)); /* FMC, The number of CS is set at the board level */ + object_property_set_link(OBJECT(&s->fmc), OBJECT(s->dram_mr), "dram", &err); + if (err) { + error_propagate(errp, err); + return; + } object_property_set_int(OBJECT(&s->fmc), sc->memmap[ASPEED_SDRAM], "sdram-base", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } static Property aspeed_soc_properties[] = { DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), + DEFINE_PROP_LINK("dram", AspeedSoCState, dram_mr, TYPE_MEMORY_REGION, + MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The I2C controller of the Aspeed AST2500 and AST2600 SoCs supports DMA transfers to and from DRAM. A pair of registers defines the buffer address and the length of the DMA transfer. The address should be aligned on 4 bytes and the maximum length should not exceed 4K. The receive or transmit DMA transfer can then be initiated with specific bits in the Command/Status register of the controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/aspeed_i2c.h | 5 ++ hw/arm/aspeed_ast2600.c | 5 ++ hw/arm/aspeed_soc.c | 5 ++ hw/i2c/aspeed_i2c.c | 126 +++++++++++++++++++++++++++++++++++- 4 files changed, 138 insertions(+), 3 deletions(-) diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/aspeed_i2c.h +++ b/include/hw/i2c/aspeed_i2c.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CBus { uint32_t cmd; uint32_t buf; uint32_t pool_ctrl; + uint32_t dma_addr; + uint32_t dma_len; } AspeedI2CBus; typedef struct AspeedI2CState { @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CState { uint8_t pool[ASPEED_I2C_MAX_POOL_SIZE]; AspeedI2CBus busses[ASPEED_I2C_NR_BUSSES]; + MemoryRegion *dram_mr; + AddressSpace dram_as; } AspeedI2CState; #define ASPEED_I2C_CLASS(klass) \ @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CClass { hwaddr pool_base; uint8_t *(*bus_pool_base)(AspeedI2CBus *); bool check_sram; + bool has_dma; } AspeedI2CClass; diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) } /* I2C */ + object_property_set_link(OBJECT(&s->i2c), OBJECT(s->dram_mr), "dram", &err); + if (err) { + error_propagate(errp, err); + return; + } object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err); if (err) { error_propagate(errp, err); diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } /* I2C */ + object_property_set_link(OBJECT(&s->i2c), OBJECT(s->dram_mr), "dram", &err); + if (err) { + error_propagate(errp, err); + return; + } object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err); if (err) { error_propagate(errp, err); diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ #include "migration/vmstate.h" #include "qemu/log.h" #include "qemu/module.h" +#include "qemu/error-report.h" +#include "qapi/error.h" #include "hw/i2c/aspeed_i2c.h" #include "hw/irq.h" +#include "hw/qdev-properties.h" /* I2C Global Register */ @@ -XXX,XX +XXX,XX @@ #define I2CD_BYTE_BUF_TX_MASK 0xff #define I2CD_BYTE_BUF_RX_SHIFT 8 #define I2CD_BYTE_BUF_RX_MASK 0xff - +#define I2CD_DMA_ADDR 0x24 /* DMA Buffer Address */ +#define I2CD_DMA_LEN 0x28 /* DMA Transfer Length < 4KB */ static inline bool aspeed_i2c_bus_is_master(AspeedI2CBus *bus) { @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, unsigned size) { AspeedI2CBus *bus = opaque; + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); switch (offset) { case I2CD_FUN_CTRL_REG: @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, return bus->buf; case I2CD_CMD_REG: return bus->cmd | (i2c_bus_busy(bus->bus) << 16); + case I2CD_DMA_ADDR: + if (!aic->has_dma) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + return -1; + } + return bus->dma_addr; + case I2CD_DMA_LEN: + if (!aic->has_dma) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + return -1; + } + return bus->dma_len; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus) return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK; } +static int aspeed_i2c_dma_read(AspeedI2CBus *bus, uint8_t *data) +{ + MemTxResult result; + AspeedI2CState *s = bus->controller; + + result = address_space_read(&s->dram_as, bus->dma_addr, + MEMTXATTRS_UNSPECIFIED, data, 1); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM read failed @%08x\n", + __func__, bus->dma_addr); + return -1; + } + + bus->dma_addr++; + bus->dma_len--; + return 0; +} + static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) { AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); @@ -XXX,XX +XXX,XX @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) } } bus->cmd &= ~I2CD_TX_BUFF_ENABLE; + } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { + while (bus->dma_len) { + uint8_t data; + aspeed_i2c_dma_read(bus, &data); + ret = i2c_send(bus->bus, data); + if (ret) { + break; + } + } + bus->cmd &= ~I2CD_TX_DMA_ENABLE; } else { ret = i2c_send(bus->bus, bus->buf); } @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_recv(AspeedI2CBus *bus) bus->pool_ctrl &= ~(0xff << 24); bus->pool_ctrl |= (i & 0xff) << 24; bus->cmd &= ~I2CD_RX_BUFF_ENABLE; + } else if (bus->cmd & I2CD_RX_DMA_ENABLE) { + uint8_t data; + + while (bus->dma_len) { + MemTxResult result; + + data = i2c_recv(bus->bus); + result = address_space_write(&s->dram_as, bus->dma_addr, + MEMTXATTRS_UNSPECIFIED, &data, 1); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM write failed @%08x\n", + __func__, bus->dma_addr); + return; + } + bus->dma_addr++; + bus->dma_len--; + } + bus->cmd &= ~I2CD_RX_DMA_ENABLE; } else { data = i2c_recv(bus->bus); bus->buf = (data & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; @@ -XXX,XX +XXX,XX @@ static uint8_t aspeed_i2c_get_addr(AspeedI2CBus *bus) uint8_t *pool_base = aic->bus_pool_base(bus); return pool_base[0]; + } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { + uint8_t data; + + aspeed_i2c_dma_read(bus, &data); + return data; } else { return bus->buf; } @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) */ pool_start++; } + } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { + if (bus->dma_len == 0) { + bus->cmd &= ~I2CD_M_TX_CMD; + } } else { bus->cmd &= ~I2CD_M_TX_CMD; } @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, break; } + if (!aic->has_dma && + value & (I2CD_RX_DMA_ENABLE | I2CD_TX_DMA_ENABLE)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + break; + } + aspeed_i2c_bus_handle_cmd(bus, value); aspeed_i2c_bus_raise_interrupt(bus); break; + case I2CD_DMA_ADDR: + if (!aic->has_dma) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + break; + } + + bus->dma_addr = value & 0xfffffffc; + break; + + case I2CD_DMA_LEN: + if (!aic->has_dma) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + break; + } + + bus->dma_len = value & 0xfff; + if (!bus->dma_len) { + qemu_log_mask(LOG_UNIMP, "%s: invalid DMA length\n", __func__); + } + break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_i2c_pool_ops = { static const VMStateDescription aspeed_i2c_bus_vmstate = { .name = TYPE_ASPEED_I2C, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (VMStateField[]) { VMSTATE_UINT8(id, AspeedI2CBus), VMSTATE_UINT32(ctrl, AspeedI2CBus), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription aspeed_i2c_bus_vmstate = { VMSTATE_UINT32(cmd, AspeedI2CBus), VMSTATE_UINT32(buf, AspeedI2CBus), VMSTATE_UINT32(pool_ctrl, AspeedI2CBus), + VMSTATE_UINT32(dma_addr, AspeedI2CBus), + VMSTATE_UINT32(dma_len, AspeedI2CBus), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_reset(DeviceState *dev) s->busses[i].intr_status = 0; s->busses[i].cmd = 0; s->busses[i].buf = 0; + s->busses[i].dma_addr = 0; + s->busses[i].dma_len = 0; i2c_end_transfer(s->busses[i].bus); } } @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->pool_iomem, OBJECT(s), &aspeed_i2c_pool_ops, s, "aspeed.i2c-pool", aic->pool_size); memory_region_add_subregion(&s->iomem, aic->pool_base, &s->pool_iomem); + + if (aic->has_dma) { + if (!s->dram_mr) { + error_setg(errp, TYPE_ASPEED_I2C ": 'dram' link not set"); + return; + } + + address_space_init(&s->dram_as, s->dram_mr, "dma-dram"); + } } +static Property aspeed_i2c_properties[] = { + DEFINE_PROP_LINK("dram", AspeedI2CState, dram_mr, + TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_END_OF_LIST(), +}; + static void aspeed_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &aspeed_i2c_vmstate; dc->reset = aspeed_i2c_reset; + dc->props = aspeed_i2c_properties; dc->realize = aspeed_i2c_realize; dc->desc = "Aspeed I2C Controller"; } @@ -XXX,XX +XXX,XX @@ static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) aic->pool_base = 0x200; aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base; aic->check_sram = true; + aic->has_dma = true; } static const TypeInfo aspeed_2500_i2c_info = { @@ -XXX,XX +XXX,XX @@ static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data) aic->pool_size = 0x200; aic->pool_base = 0xC00; aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base; + aic->has_dma = true; } static const TypeInfo aspeed_2600_i2c_info = { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 93 ++++++++++++++++++++++++++++++++++++++------- hw/i2c/trace-events | 9 +++++ 2 files changed, 89 insertions(+), 13 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/aspeed_i2c.h" #include "hw/irq.h" #include "hw/qdev-properties.h" +#include "trace.h" /* I2C Global Register */ @@ -XXX,XX +XXX,XX @@ static inline void aspeed_i2c_bus_raise_interrupt(AspeedI2CBus *bus) { AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + trace_aspeed_i2c_bus_raise_interrupt(bus->intr_status, + bus->intr_status & I2CD_INTR_TX_NAK ? "nak|" : "", + bus->intr_status & I2CD_INTR_TX_ACK ? "ack|" : "", + bus->intr_status & I2CD_INTR_RX_DONE ? "done|" : "", + bus->intr_status & I2CD_INTR_NORMAL_STOP ? "normal|" : "", + bus->intr_status & I2CD_INTR_ABNORMAL ? "abnormal" : ""); + bus->intr_status &= bus->intr_ctrl; if (bus->intr_status) { bus->controller->intr_status |= 1 << bus->id; @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, { AspeedI2CBus *bus = opaque; AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + uint64_t value = -1; switch (offset) { case I2CD_FUN_CTRL_REG: - return bus->ctrl; + value = bus->ctrl; + break; case I2CD_AC_TIMING_REG1: - return bus->timing[0]; + value = bus->timing[0]; + break; case I2CD_AC_TIMING_REG2: - return bus->timing[1]; + value = bus->timing[1]; + break; case I2CD_INTR_CTRL_REG: - return bus->intr_ctrl; + value = bus->intr_ctrl; + break; case I2CD_INTR_STS_REG: - return bus->intr_status; + value = bus->intr_status; + break; case I2CD_POOL_CTRL_REG: - return bus->pool_ctrl; + value = bus->pool_ctrl; + break; case I2CD_BYTE_BUF_REG: - return bus->buf; + value = bus->buf; + break; case I2CD_CMD_REG: - return bus->cmd | (i2c_bus_busy(bus->bus) << 16); + value = bus->cmd | (i2c_bus_busy(bus->bus) << 16); + break; case I2CD_DMA_ADDR: if (!aic->has_dma) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); - return -1; + break; } - return bus->dma_addr; + value = bus->dma_addr; + break; case I2CD_DMA_LEN: if (!aic->has_dma) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); - return -1; + break; } - return bus->dma_len; + value = bus->dma_len; + break; + default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); - return -1; + value = -1; + break; } + + trace_aspeed_i2c_bus_read(bus->id, offset, size, value); + return value; } static void aspeed_i2c_set_state(AspeedI2CBus *bus, uint8_t state) @@ -XXX,XX +XXX,XX @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) for (i = pool_start; i < I2CD_POOL_TX_COUNT(bus->pool_ctrl); i++) { uint8_t *pool_base = aic->bus_pool_base(bus); + trace_aspeed_i2c_bus_send("BUF", i + 1, + I2CD_POOL_TX_COUNT(bus->pool_ctrl), + pool_base[i]); ret = i2c_send(bus->bus, pool_base[i]); if (ret) { break; @@ -XXX,XX +XXX,XX @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) while (bus->dma_len) { uint8_t data; aspeed_i2c_dma_read(bus, &data); + trace_aspeed_i2c_bus_send("DMA", bus->dma_len, bus->dma_len, data); ret = i2c_send(bus->bus, data); if (ret) { break; @@ -XXX,XX +XXX,XX @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) } bus->cmd &= ~I2CD_TX_DMA_ENABLE; } else { + trace_aspeed_i2c_bus_send("BYTE", pool_start, 1, bus->buf); ret = i2c_send(bus->bus, bus->buf); } @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_recv(AspeedI2CBus *bus) for (i = 0; i < I2CD_POOL_RX_SIZE(bus->pool_ctrl); i++) { pool_base[i] = i2c_recv(bus->bus); + trace_aspeed_i2c_bus_recv("BUF", i + 1, + I2CD_POOL_RX_SIZE(bus->pool_ctrl), + pool_base[i]); } /* Update RX count */ @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_recv(AspeedI2CBus *bus) MemTxResult result; data = i2c_recv(bus->bus); + trace_aspeed_i2c_bus_recv("DMA", bus->dma_len, bus->dma_len, data); result = address_space_write(&s->dram_as, bus->dma_addr, MEMTXATTRS_UNSPECIFIED, &data, 1); if (result != MEMTX_OK) { @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_recv(AspeedI2CBus *bus) bus->cmd &= ~I2CD_RX_DMA_ENABLE; } else { data = i2c_recv(bus->bus); + trace_aspeed_i2c_bus_recv("BYTE", 1, 1, bus->buf); bus->buf = (data & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; } } @@ -XXX,XX +XXX,XX @@ static bool aspeed_i2c_check_sram(AspeedI2CBus *bus) return true; } +static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus) +{ + g_autofree char *cmd_flags; + uint32_t count; + + if (bus->cmd & (I2CD_RX_BUFF_ENABLE | I2CD_RX_BUFF_ENABLE)) { + count = I2CD_POOL_TX_COUNT(bus->pool_ctrl); + } else if (bus->cmd & (I2CD_RX_DMA_ENABLE | I2CD_RX_DMA_ENABLE)) { + count = bus->dma_len; + } else { /* BYTE mode */ + count = 1; + } + + cmd_flags = g_strdup_printf("%s%s%s%s%s%s%s%s%s", + bus->cmd & I2CD_M_START_CMD ? "start|" : "", + bus->cmd & I2CD_RX_DMA_ENABLE ? "rxdma|" : "", + bus->cmd & I2CD_TX_DMA_ENABLE ? "txdma|" : "", + bus->cmd & I2CD_RX_BUFF_ENABLE ? "rxbuf|" : "", + bus->cmd & I2CD_TX_BUFF_ENABLE ? "txbuf|" : "", + bus->cmd & I2CD_M_TX_CMD ? "tx|" : "", + bus->cmd & I2CD_M_RX_CMD ? "rx|" : "", + bus->cmd & I2CD_M_S_RX_CMD_LAST ? "last|" : "", + bus->cmd & I2CD_M_STOP_CMD ? "stop" : ""); + + trace_aspeed_i2c_bus_cmd(bus->cmd, cmd_flags, count, bus->intr_status); +} + /* * The state machine needs some refinement. It is only used to track * invalid STOP commands for the moment. @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) return; } + if (trace_event_get_state_backends(TRACE_ASPEED_I2C_BUS_CMD)) { + aspeed_i2c_bus_cmd_dump(bus); + } + if (bus->cmd & I2CD_M_START_CMD) { uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? I2CD_MSTARTR : I2CD_MSTART; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); bool handle_rx; + trace_aspeed_i2c_bus_write(bus->id, offset, size, value); + switch (offset) { case I2CD_FUN_CTRL_REG: if (value & I2CD_SLAVE_EN) { diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ i2c_event(const char *event, uint8_t address) "%s(addr:0x%02x)" i2c_send(uint8_t address, uint8_t data) "send(addr:0x%02x) data:0x%02x" i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x" + +# aspeed_i2c.c + +aspeed_i2c_bus_cmd(uint32_t cmd, const char *cmd_flags, uint32_t count, uint32_t intr_status) "handling cmd=0x%x %s count=%d intr=0x%x" +aspeed_i2c_bus_raise_interrupt(uint32_t intr_status, const char *str1, const char *str2, const char *str3, const char *str4, const char *str5) "handled intr=0x%x %s%s%s%s%s" +aspeed_i2c_bus_read(uint32_t busid, uint64_t offset, unsigned size, uint64_t value) "bus[%d]: To 0x%" PRIx64 " of size %u: 0x%" PRIx64 +aspeed_i2c_bus_write(uint32_t busid, uint64_t offset, unsigned size, uint64_t value) "bus[%d]: To 0x%" PRIx64 " of size %u: 0x%" PRIx64 +aspeed_i2c_bus_send(const char *mode, int i, int count, uint8_t byte) "%s send %d/%d 0x%02x" +aspeed_i2c_bus_recv(const char *mode, int i, int count, uint8_t byte) "%s recv %d/%d 0x%02x" -- 2.20.1 From: Joel Stanley <joel@jms.id.au> Most boards have this much. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static int ast2600_rambits(AspeedSDMCState *s) } /* use a common default */ - warn_report("Invalid RAM size 0x%" PRIx64 ". Using default 512M", + warn_report("Invalid RAM size 0x%" PRIx64 ". Using default 1024M", s->ram_size); - s->ram_size = 512 << 20; - return ASPEED_SDMC_AST2600_512MB; + s->ram_size = 1024 << 20; + return ASPEED_SDMC_AST2600_1024MB; } static void aspeed_sdmc_reset(DeviceState *dev) -- 2.20.1 From: Joel Stanley <joel@jms.id.au> This models the clock write one to clear registers, and fixes up some incorrect behavior in all of the write to clear registers. There was also a typo in one of the register definitions. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-8-clg@kaod.org [clg: checkpatch.pl fixes ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_scu.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define AST2600_CLK_STOP_CTRL TO_REG(0x80) #define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84) #define AST2600_CLK_STOP_CTRL2 TO_REG(0x90) -#define AST2600_CLK_STOP_CTR2L_CLR TO_REG(0x94) +#define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94) #define AST2600_SDRAM_HANDSHAKE TO_REG(0x100) #define AST2600_HPLL_PARAM TO_REG(0x200) #define AST2600_HPLL_EXT TO_REG(0x204) @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset, return s->regs[reg]; } -static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t data, - unsigned size) +static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, + uint64_t data64, unsigned size) { AspeedSCUState *s = ASPEED_SCU(opaque); int reg = TO_REG(offset); + /* Truncate here so bitwise operations below behave as expected */ + uint32_t data = data64; if (reg >= ASPEED_AST2600_SCU_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t data, /* fall through */ case AST2600_SYS_RST_CTRL: case AST2600_SYS_RST_CTRL2: + case AST2600_CLK_STOP_CTRL: + case AST2600_CLK_STOP_CTRL2: /* W1S (Write 1 to set) registers */ s->regs[reg] |= data; return; case AST2600_SYS_RST_CTRL_CLR: case AST2600_SYS_RST_CTRL2_CLR: + case AST2600_CLK_STOP_CTRL_CLR: + case AST2600_CLK_STOP_CTRL2_CLR: case AST2600_HW_STRAP1_CLR: case AST2600_HW_STRAP2_CLR: - /* W1C (Write 1 to clear) registers */ - s->regs[reg] &= ~data; + /* + * W1C (Write 1 to clear) registers are offset by one address from + * the data register + */ + s->regs[reg - 1] &= ~data; return; case AST2600_RNG_DATA: -- 2.20.1 From: Joel Stanley <joel@jms.id.au> Users benefit from knowing which watchdog timer has expired. The address of the watchdog's registers unambiguously indicates which has expired, so log that. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-9-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/watchdog/wdt_aspeed.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_aspeed.c +++ b/hw/watchdog/wdt_aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_timer_expired(void *dev) return; } - qemu_log_mask(CPU_LOG_RESET, "Watchdog timer expired.\n"); + qemu_log_mask(CPU_LOG_RESET, "Watchdog timer %" HWADDR_PRIx " expired.\n", + s->iomem.addr); watchdog_perform_action(); timer_del(s->timer); } -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The AST2600 control register sneakily changed the meaning of bit 4 without anyone noticing. It no longer controls the 1MHz vs APB clock select, and instead always runs at 1MHz. The AST2500 was always 1MHz too, but it retained bit 4, making it read only. We can model both using the same fixed 1MHz calculation. Fixes: 6b2b2a703cad ("hw: wdt_aspeed: Add AST2600 support") Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-10-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/wdt_aspeed.h | 1 + hw/watchdog/wdt_aspeed.c | 21 +++++++++++++++++---- 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/wdt_aspeed.h +++ b/include/hw/watchdog/wdt_aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedWDTClass { uint32_t ext_pulse_width_mask; uint32_t reset_ctrl_reg; void (*reset_pulse)(AspeedWDTState *s, uint32_t property); + void (*wdt_reload)(AspeedWDTState *s); } AspeedWDTClass; #endif /* WDT_ASPEED_H */ diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_aspeed.c +++ b/hw/watchdog/wdt_aspeed.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_wdt_read(void *opaque, hwaddr offset, unsigned size) } -static void aspeed_wdt_reload(AspeedWDTState *s, bool pclk) +static void aspeed_wdt_reload(AspeedWDTState *s) { uint64_t reload; - if (pclk) { + if (!(s->regs[WDT_CTRL] & WDT_CTRL_1MHZ_CLK)) { reload = muldiv64(s->regs[WDT_RELOAD_VALUE], NANOSECONDS_PER_SECOND, s->pclk_freq); } else { @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_reload(AspeedWDTState *s, bool pclk) } } +static void aspeed_wdt_reload_1mhz(AspeedWDTState *s) +{ + uint64_t reload = s->regs[WDT_RELOAD_VALUE] * 1000ULL; + + if (aspeed_wdt_is_enabled(s)) { + timer_mod(s->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + reload); + } +} + + static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data, case WDT_RESTART: if ((data & 0xFFFF) == WDT_RESTART_MAGIC) { s->regs[WDT_STATUS] = s->regs[WDT_RELOAD_VALUE]; - aspeed_wdt_reload(s, !(s->regs[WDT_CTRL] & WDT_CTRL_1MHZ_CLK)); + awc->wdt_reload(s); } break; case WDT_CTRL: if (enable && !aspeed_wdt_is_enabled(s)) { s->regs[WDT_CTRL] = data; - aspeed_wdt_reload(s, !(data & WDT_CTRL_1MHZ_CLK)); + awc->wdt_reload(s); } else if (!enable && aspeed_wdt_is_enabled(s)) { s->regs[WDT_CTRL] = data; timer_del(s->timer); @@ -XXX,XX +XXX,XX @@ static void aspeed_2400_wdt_class_init(ObjectClass *klass, void *data) awc->offset = 0x20; awc->ext_pulse_width_mask = 0xff; awc->reset_ctrl_reg = SCU_RESET_CONTROL1; + awc->wdt_reload = aspeed_wdt_reload; } static const TypeInfo aspeed_2400_wdt_info = { @@ -XXX,XX +XXX,XX @@ static void aspeed_2500_wdt_class_init(ObjectClass *klass, void *data) awc->ext_pulse_width_mask = 0xfffff; awc->reset_ctrl_reg = SCU_RESET_CONTROL1; awc->reset_pulse = aspeed_2500_wdt_reset_pulse; + awc->wdt_reload = aspeed_wdt_reload_1mhz; } static const TypeInfo aspeed_2500_wdt_info = { @@ -XXX,XX +XXX,XX @@ static void aspeed_2600_wdt_class_init(ObjectClass *klass, void *data) awc->ext_pulse_width_mask = 0xfffff; /* TODO */ awc->reset_ctrl_reg = AST2600_SCU_RESET_CONTROL1; awc->reset_pulse = aspeed_2500_wdt_reset_pulse; + awc->wdt_reload = aspeed_wdt_reload_1mhz; } static const TypeInfo aspeed_2600_wdt_info = { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The current model only restores the Segment Register values but leaves the previous CS mapping behind. Introduce a helper setting the register value and mapping the region at the requested address. Use this helper when a Segment register is set and at reset. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-11-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/aspeed_smc.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static bool aspeed_smc_flash_overlap(const AspeedSMCState *s, return false; } +static void aspeed_smc_flash_set_segment_region(AspeedSMCState *s, int cs, + uint64_t regval) +{ + AspeedSMCFlash *fl = &s->flashes[cs]; + AspeedSegments seg; + + s->ctrl->reg_to_segment(s, regval, &seg); + + memory_region_transaction_begin(); + memory_region_set_size(&fl->mmio, seg.size); + memory_region_set_address(&fl->mmio, seg.addr - s->ctrl->flash_window_base); + memory_region_set_enabled(&fl->mmio, true); + memory_region_transaction_commit(); + + s->regs[R_SEG_ADDR0 + cs] = regval; +} + static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, uint64_t new) { - AspeedSMCFlash *fl = &s->flashes[cs]; AspeedSegments seg; s->ctrl->reg_to_segment(s, new, &seg); @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, aspeed_smc_flash_overlap(s, &seg, cs); /* All should be fine now to move the region */ - memory_region_transaction_begin(); - memory_region_set_size(&fl->mmio, seg.size); - memory_region_set_address(&fl->mmio, seg.addr - s->ctrl->flash_window_base); - memory_region_set_enabled(&fl->mmio, true); - memory_region_transaction_commit(); - - s->regs[R_SEG_ADDR0 + cs] = new; + aspeed_smc_flash_set_segment_region(s, cs, new); } static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr, @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_reset(DeviceState *d) qemu_set_irq(s->cs_lines[i], true); } - /* setup default segment register values for all */ + /* setup the default segment register values and regions for all */ for (i = 0; i < s->ctrl->max_slaves; ++i) { - s->regs[R_SEG_ADDR0 + i] = - s->ctrl->segment_to_reg(s, &s->ctrl->segments[i]); + aspeed_smc_flash_set_segment_region(s, i, + s->ctrl->segment_to_reg(s, &s->ctrl->segments[i])); } /* HW strapping flash type for the AST2600 controllers */ -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The segments can be disabled on the AST2600 (zero register value). CS0 is open by default but not the other CS. This is closing the access to the flash device in user mode and forbids scanning. In the model, check the segment size and disable the associated region when the value is zero. Fixes: bcaa8ddd081c ("aspeed/smc: Add AST2600 support") Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-12-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/aspeed_smc.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_2600_smc_reg_to_segment(const AspeedSMCState *s, uint32_t start_offset = (reg << 16) & AST2600_SEG_ADDR_MASK; uint32_t end_offset = reg & AST2600_SEG_ADDR_MASK; - seg->addr = s->ctrl->flash_window_base + start_offset; - seg->size = end_offset + MiB - start_offset; + if (reg) { + seg->addr = s->ctrl->flash_window_base + start_offset; + seg->size = end_offset + MiB - start_offset; + } else { + seg->addr = s->ctrl->flash_window_base; + seg->size = 0; + } } static bool aspeed_smc_flash_overlap(const AspeedSMCState *s, @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_set_segment_region(AspeedSMCState *s, int cs, memory_region_transaction_begin(); memory_region_set_size(&fl->mmio, seg.size); memory_region_set_address(&fl->mmio, seg.addr - s->ctrl->flash_window_base); - memory_region_set_enabled(&fl->mmio, true); + memory_region_set_enabled(&fl->mmio, !!seg.size); memory_region_transaction_commit(); s->regs[R_SEG_ADDR0 + cs] = regval; @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, } /* Keep the segment in the overall flash window */ - if (seg.addr + seg.size <= s->ctrl->flash_window_base || - seg.addr > s->ctrl->flash_window_base + s->ctrl->flash_window_size) { + if (seg.size && + (seg.addr + seg.size <= s->ctrl->flash_window_base || + seg.addr > s->ctrl->flash_window_base + s->ctrl->flash_window_size)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is invalid : " "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", s->ctrl->name, cs, seg.addr, seg.addr + seg.size); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Each CS has its own Read Timing Compensation Register on newer SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/ssi/aspeed_smc.h | 1 + hw/ssi/aspeed_smc.c | 17 ++++++++++++++--- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/aspeed_smc.h +++ b/include/hw/ssi/aspeed_smc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSMCController { uint8_t r_ce_ctrl; uint8_t r_ctrl0; uint8_t r_timings; + uint8_t nregs_timings; uint8_t conf_enable_w0; uint8_t max_slaves; const AspeedSegments *segments; diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ /* Checksum Calculation Result */ #define R_DMA_CHECKSUM (0x90 / 4) -/* Misc Control Register #2 */ +/* Read Timing Compensation Register */ #define R_TIMINGS (0x94 / 4) /* SPI controller registers and bits (AST2400) */ @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, + .nregs_timings = 1, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 5, .segments = aspeed_segments_legacy, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, + .nregs_timings = 1, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 5, .segments = aspeed_segments_fmc, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = 0xff, .r_ctrl0 = R_SPI_CTRL0, .r_timings = R_SPI_TIMINGS, + .nregs_timings = 1, .conf_enable_w0 = SPI_CONF_ENABLE_W0, .max_slaves = 1, .segments = aspeed_segments_spi, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, + .nregs_timings = 1, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 3, .segments = aspeed_segments_ast2500_fmc, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, + .nregs_timings = 1, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 2, .segments = aspeed_segments_ast2500_spi1, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, + .nregs_timings = 1, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 2, .segments = aspeed_segments_ast2500_spi2, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, + .nregs_timings = 1, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 3, .segments = aspeed_segments_ast2600_fmc, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, + .nregs_timings = 2, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 2, .segments = aspeed_segments_ast2600_spi1, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, + .nregs_timings = 3, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 3, .segments = aspeed_segments_ast2600_spi2, @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) addr >>= 2; if (addr == s->r_conf || - addr == s->r_timings || + (addr >= s->r_timings && + addr < s->r_timings + s->ctrl->nregs_timings) || addr == s->r_ce_ctrl || addr == R_INTR_CTRL || addr == R_DUMMY_DATA || @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, addr >>= 2; if (addr == s->r_conf || - addr == s->r_timings || + (addr >= s->r_timings && + addr < s->r_timings + s->ctrl->nregs_timings) || addr == s->r_ce_ctrl) { s->regs[addr] = value; } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> AspeedBoardConfig is a redundant way to define class attributes and it complexifies the machine definition and initialization. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-14-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed.h | 24 ++-- hw/arm/aspeed.c | 243 ++++++++++++++++++++++------------------ 2 files changed, 143 insertions(+), 124 deletions(-) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardState AspeedBoardState; -typedef struct AspeedBoardConfig { - const char *name; - const char *desc; - const char *soc_name; - uint32_t hw_strap1; - uint32_t hw_strap2; - const char *fmc_model; - const char *spi_model; - uint32_t num_cs; - void (*i2c_init)(AspeedBoardState *bmc); - uint32_t ram; -} AspeedBoardConfig; - #define TYPE_ASPEED_MACHINE MACHINE_TYPE_NAME("aspeed") #define ASPEED_MACHINE(obj) \ OBJECT_CHECK(AspeedMachine, (obj), TYPE_ASPEED_MACHINE) @@ -XXX,XX +XXX,XX @@ typedef struct AspeedMachine { typedef struct AspeedMachineClass { MachineClass parent_obj; - const AspeedBoardConfig *board; + + const char *name; + const char *desc; + const char *soc_name; + uint32_t hw_strap1; + uint32_t hw_strap2; + const char *fmc_model; + const char *spi_model; + uint32_t num_cs; + void (*i2c_init)(AspeedBoardState *bmc); } AspeedMachineClass; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void aspeed_board_init(MachineState *machine, - const AspeedBoardConfig *cfg) +static void aspeed_machine_init(MachineState *machine) { AspeedBoardState *bmc; + AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); AspeedSoCClass *sc; DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); ram_addr_t max_ram_size; @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, UINT32_MAX); object_initialize_child(OBJECT(machine), "soc", &bmc->soc, - (sizeof(bmc->soc)), cfg->soc_name, &error_abort, + (sizeof(bmc->soc)), amc->soc_name, &error_abort, NULL); sc = ASPEED_SOC_GET_CLASS(&bmc->soc); object_property_set_uint(OBJECT(&bmc->soc), ram_size, "ram-size", &error_abort); - object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1", + object_property_set_int(OBJECT(&bmc->soc), amc->hw_strap1, "hw-strap1", &error_abort); - object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap2, "hw-strap2", + object_property_set_int(OBJECT(&bmc->soc), amc->hw_strap2, "hw-strap2", &error_abort); - object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs", + object_property_set_int(OBJECT(&bmc->soc), amc->num_cs, "num-cs", &error_abort); object_property_set_int(OBJECT(&bmc->soc), machine->smp.cpus, "num-cpus", &error_abort); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, "max_ram", max_ram_size - ram_size); memory_region_add_subregion(&bmc->ram_container, ram_size, &bmc->max_ram); - aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort); - aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort); + aspeed_board_init_flashes(&bmc->soc.fmc, amc->fmc_model, &error_abort); + aspeed_board_init_flashes(&bmc->soc.spi[0], amc->spi_model, &error_abort); /* Install first FMC flash content as a boot rom. */ if (drive0) { @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, aspeed_board_binfo.loader_start = sc->memmap[ASPEED_SDRAM]; aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus; - if (cfg->i2c_init) { - cfg->i2c_init(bmc); + if (amc->i2c_init) { + amc->i2c_init(bmc); } for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) { @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) 0x60); } -static void aspeed_machine_init(MachineState *machine) -{ - AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); - - aspeed_board_init(machine, amc->board); -} - static void aspeed_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); - AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); - const AspeedBoardConfig *board = data; - mc->desc = board->desc; mc->init = aspeed_machine_init; mc->max_cpus = ASPEED_CPUS_NUM; mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; - if (board->ram) { - mc->default_ram_size = board->ram; - } - amc->board = board; } -static const TypeInfo aspeed_machine_type = { - .name = TYPE_ASPEED_MACHINE, - .parent = TYPE_MACHINE, - .instance_size = sizeof(AspeedMachine), - .class_size = sizeof(AspeedMachineClass), - .abstract = true, -}; - -static const AspeedBoardConfig aspeed_boards[] = { - { - .name = MACHINE_TYPE_NAME("palmetto-bmc"), - .desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)", - .soc_name = "ast2400-a1", - .hw_strap1 = PALMETTO_BMC_HW_STRAP1, - .fmc_model = "n25q256a", - .spi_model = "mx25l25635e", - .num_cs = 1, - .i2c_init = palmetto_bmc_i2c_init, - .ram = 256 * MiB, - }, { - .name = MACHINE_TYPE_NAME("ast2500-evb"), - .desc = "Aspeed AST2500 EVB (ARM1176)", - .soc_name = "ast2500-a1", - .hw_strap1 = AST2500_EVB_HW_STRAP1, - .fmc_model = "w25q256", - .spi_model = "mx25l25635e", - .num_cs = 1, - .i2c_init = ast2500_evb_i2c_init, - .ram = 512 * MiB, - }, { - .name = MACHINE_TYPE_NAME("romulus-bmc"), - .desc = "OpenPOWER Romulus BMC (ARM1176)", - .soc_name = "ast2500-a1", - .hw_strap1 = ROMULUS_BMC_HW_STRAP1, - .fmc_model = "n25q256a", - .spi_model = "mx66l1g45g", - .num_cs = 2, - .i2c_init = romulus_bmc_i2c_init, - .ram = 512 * MiB, - }, { - .name = MACHINE_TYPE_NAME("swift-bmc"), - .desc = "OpenPOWER Swift BMC (ARM1176)", - .soc_name = "ast2500-a1", - .hw_strap1 = SWIFT_BMC_HW_STRAP1, - .fmc_model = "mx66l1g45g", - .spi_model = "mx66l1g45g", - .num_cs = 2, - .i2c_init = swift_bmc_i2c_init, - .ram = 512 * MiB, - }, { - .name = MACHINE_TYPE_NAME("witherspoon-bmc"), - .desc = "OpenPOWER Witherspoon BMC (ARM1176)", - .soc_name = "ast2500-a1", - .hw_strap1 = WITHERSPOON_BMC_HW_STRAP1, - .fmc_model = "mx25l25635e", - .spi_model = "mx66l1g45g", - .num_cs = 2, - .i2c_init = witherspoon_bmc_i2c_init, - .ram = 512 * MiB, - }, { - .name = MACHINE_TYPE_NAME("ast2600-evb"), - .desc = "Aspeed AST2600 EVB (Cortex A7)", - .soc_name = "ast2600-a0", - .hw_strap1 = AST2600_EVB_HW_STRAP1, - .hw_strap2 = AST2600_EVB_HW_STRAP2, - .fmc_model = "w25q512jv", - .spi_model = "mx66u51235f", - .num_cs = 1, - .i2c_init = ast2600_evb_i2c_init, - .ram = 1 * GiB, - }, -}; - -static void aspeed_machine_types(void) +static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data) { - int i; + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); - type_register_static(&aspeed_machine_type); - for (i = 0; i < ARRAY_SIZE(aspeed_boards); ++i) { - TypeInfo ti = { - .name = aspeed_boards[i].name, - .parent = TYPE_ASPEED_MACHINE, - .class_init = aspeed_machine_class_init, - .class_data = (void *)&aspeed_boards[i], - }; - type_register(&ti); + mc->desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)"; + amc->soc_name = "ast2400-a1"; + amc->hw_strap1 = PALMETTO_BMC_HW_STRAP1; + amc->fmc_model = "n25q256a"; + amc->spi_model = "mx25l25635e"; + amc->num_cs = 1; + amc->i2c_init = palmetto_bmc_i2c_init; + mc->default_ram_size = 256 * MiB; +}; + +static void aspeed_machine_ast2500_evb_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Aspeed AST2500 EVB (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = AST2500_EVB_HW_STRAP1; + amc->fmc_model = "w25q256"; + amc->spi_model = "mx25l25635e"; + amc->num_cs = 1; + amc->i2c_init = ast2500_evb_i2c_init; + mc->default_ram_size = 512 * MiB; +}; + +static void aspeed_machine_romulus_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "OpenPOWER Romulus BMC (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = ROMULUS_BMC_HW_STRAP1; + amc->fmc_model = "n25q256a"; + amc->spi_model = "mx66l1g45g"; + amc->num_cs = 2; + amc->i2c_init = romulus_bmc_i2c_init; + mc->default_ram_size = 512 * MiB; +}; + +static void aspeed_machine_swift_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "OpenPOWER Swift BMC (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = SWIFT_BMC_HW_STRAP1; + amc->fmc_model = "mx66l1g45g"; + amc->spi_model = "mx66l1g45g"; + amc->num_cs = 2; + amc->i2c_init = swift_bmc_i2c_init; + mc->default_ram_size = 512 * MiB; +}; + +static void aspeed_machine_witherspoon_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = WITHERSPOON_BMC_HW_STRAP1; + amc->fmc_model = "mx25l25635e"; + amc->spi_model = "mx66l1g45g"; + amc->num_cs = 2; + amc->i2c_init = witherspoon_bmc_i2c_init; + mc->default_ram_size = 512 * MiB; +}; + +static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Aspeed AST2600 EVB (Cortex A7)"; + amc->soc_name = "ast2600-a0"; + amc->hw_strap1 = AST2600_EVB_HW_STRAP1; + amc->hw_strap2 = AST2600_EVB_HW_STRAP2; + amc->fmc_model = "w25q512jv"; + amc->spi_model = "mx66u51235f"; + amc->num_cs = 1; + amc->i2c_init = ast2600_evb_i2c_init; + mc->default_ram_size = 1 * GiB; +}; + +static const TypeInfo aspeed_machine_types[] = { + { + .name = MACHINE_TYPE_NAME("palmetto-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_palmetto_class_init, + }, { + .name = MACHINE_TYPE_NAME("ast2500-evb"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_ast2500_evb_class_init, + }, { + .name = MACHINE_TYPE_NAME("romulus-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_romulus_class_init, + }, { + .name = MACHINE_TYPE_NAME("swift-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_swift_class_init, + }, { + .name = MACHINE_TYPE_NAME("witherspoon-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_witherspoon_class_init, + }, { + .name = MACHINE_TYPE_NAME("ast2600-evb"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_ast2600_evb_class_init, + }, { + .name = TYPE_ASPEED_MACHINE, + .parent = TYPE_MACHINE, + .instance_size = sizeof(AspeedMachine), + .class_size = sizeof(AspeedMachineClass), + .class_init = aspeed_machine_class_init, + .abstract = true, } -} +}; -type_init(aspeed_machine_types) +DEFINE_TYPES(aspeed_machine_types) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The Tacoma BMC board is replacement board for the BMC of the OpenPOWER Witherspoon system. It uses a AST2600 SoC instead of a AST2500 and the I2C layout is the same as it controls the same main board. Used for HW bringup. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedBoardState { #define AST2600_EVB_HW_STRAP1 0x000000C0 #define AST2600_EVB_HW_STRAP2 0x00000003 +/* Tacoma hardware value */ +#define TACOMA_BMC_HW_STRAP1 0x00000000 +#define TACOMA_BMC_HW_STRAP2 0x00000000 + /* * The max ram region is for firmwares that scan the address space * with load/store to guess how much RAM the SoC has. @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); + /* Bus 3: TODO bmp280@77 */ + /* Bus 3: TODO max31785@52 */ + /* Bus 3: TODO dps310@76 */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, 0x60); @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) eeprom_buf); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); + /* Bus 11: TODO ucd90160@64 */ } static void aspeed_machine_class_init(ObjectClass *oc, void *data) @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) mc->default_ram_size = 1 * GiB; }; +static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Aspeed AST2600 EVB (Cortex A7)"; + amc->soc_name = "ast2600-a0"; + amc->hw_strap1 = TACOMA_BMC_HW_STRAP1; + amc->hw_strap2 = TACOMA_BMC_HW_STRAP2; + amc->fmc_model = "mx66l1g45g"; + amc->spi_model = "mx66l1g45g"; + amc->num_cs = 2; + amc->i2c_init = witherspoon_bmc_i2c_init; /* Same board layout */ + mc->default_ram_size = 1 * GiB; +}; + static const TypeInfo aspeed_machine_types[] = { { .name = MACHINE_TYPE_NAME("palmetto-bmc"), @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("ast2600-evb"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_ast2600_evb_class_init, + }, { + .name = MACHINE_TYPE_NAME("tacoma-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_tacoma_class_init, }, { .name = TYPE_ASPEED_MACHINE, .parent = TYPE_MACHINE, -- 2.20.1 From: PanNengyuan <pannengyuan@huawei.com> Address Sanitizer shows memory leak in hw/gpio/aspeed_gpio.c:875 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: PanNengyuan <pannengyuan@huawei.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-16-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/aspeed_gpio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/aspeed_gpio.c +++ b/hw/gpio/aspeed_gpio.c @@ -XXX,XX +XXX,XX @@ static void aspeed_gpio_init(Object *obj) pin_idx % GPIOS_PER_GROUP); object_property_add(obj, name, "bool", aspeed_gpio_get_pin, aspeed_gpio_set_pin, NULL, NULL, NULL); + g_free(name); } } -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed Watchdog and Timer models have a link pointing to the SCU controller model of the machine. Change the "scu" property definition so that it explicitly sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-17-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed_ast2600.c | 8 ++++---- hw/arm/aspeed_soc.c | 8 ++++---- hw/timer/aspeed_timer.c | 17 +++++++++-------- hw/watchdog/wdt_aspeed.c | 17 ++++++++--------- 4 files changed, 25 insertions(+), 25 deletions(-) diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) snprintf(typename, sizeof(typename), "aspeed.timer-%s", socname); sysbus_init_child_obj(obj, "timerctrl", OBJECT(&s->timerctrl), sizeof(s->timerctrl), typename); - object_property_add_const_link(OBJECT(&s->timerctrl), "scu", - OBJECT(&s->scu), &error_abort); snprintf(typename, sizeof(typename), "aspeed.i2c-%s", socname); sysbus_init_child_obj(obj, "i2c", OBJECT(&s->i2c), sizeof(s->i2c), @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname); sysbus_init_child_obj(obj, "wdt[*]", OBJECT(&s->wdt[i]), sizeof(s->wdt[i]), typename); - object_property_add_const_link(OBJECT(&s->wdt[i]), "scu", - OBJECT(&s->scu), &error_abort); } for (i = 0; i < sc->macs_num; i++) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) aspeed_soc_get_irq(s, ASPEED_RTC)); /* Timer */ + object_property_set_link(OBJECT(&s->timerctrl), + OBJECT(&s->scu), "scu", &error_abort); object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err); if (err) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) for (i = 0; i < sc->wdts_num; i++) { AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]); + object_property_set_link(OBJECT(&s->wdt[i]), + OBJECT(&s->scu), "scu", &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err); if (err) { error_propagate(errp, err); diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) snprintf(typename, sizeof(typename), "aspeed.timer-%s", socname); sysbus_init_child_obj(obj, "timerctrl", OBJECT(&s->timerctrl), sizeof(s->timerctrl), typename); - object_property_add_const_link(OBJECT(&s->timerctrl), "scu", - OBJECT(&s->scu), &error_abort); snprintf(typename, sizeof(typename), "aspeed.i2c-%s", socname); sysbus_init_child_obj(obj, "i2c", OBJECT(&s->i2c), sizeof(s->i2c), @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname); sysbus_init_child_obj(obj, "wdt[*]", OBJECT(&s->wdt[i]), sizeof(s->wdt[i]), typename); - object_property_add_const_link(OBJECT(&s->wdt[i]), "scu", - OBJECT(&s->scu), &error_abort); } for (i = 0; i < sc->macs_num; i++) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) aspeed_soc_get_irq(s, ASPEED_RTC)); /* Timer */ + object_property_set_link(OBJECT(&s->timerctrl), + OBJECT(&s->scu), "scu", &error_abort); object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err); if (err) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) for (i = 0; i < sc->wdts_num; i++) { AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]); + object_property_set_link(OBJECT(&s->wdt[i]), + OBJECT(&s->scu), "scu", &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err); if (err) { error_propagate(errp, err); diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qemu/log.h" #include "qemu/module.h" +#include "hw/qdev-properties.h" #include "trace.h" #define TIMER_NR_REGS 4 @@ -XXX,XX +XXX,XX @@ static void aspeed_timer_realize(DeviceState *dev, Error **errp) int i; SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedTimerCtrlState *s = ASPEED_TIMER(dev); - Object *obj; - Error *err = NULL; - obj = object_property_get_link(OBJECT(dev), "scu", &err); - if (!obj) { - error_propagate_prepend(errp, err, "required link 'scu' not found: "); - return; - } - s->scu = ASPEED_SCU(obj); + assert(s->scu); for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) { aspeed_init_one_timer(s, i); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_timer_state = { } }; +static Property aspeed_timer_properties[] = { + DEFINE_PROP_LINK("scu", AspeedTimerCtrlState, scu, TYPE_ASPEED_SCU, + AspeedSCUState *), + DEFINE_PROP_END_OF_LIST(), +}; + static void timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void timer_class_init(ObjectClass *klass, void *data) dc->reset = aspeed_timer_reset; dc->desc = "ASPEED Timer"; dc->vmsd = &vmstate_aspeed_timer_state; + dc->props = aspeed_timer_properties; } static const TypeInfo aspeed_timer_info = { diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_aspeed.c +++ b/hw/watchdog/wdt_aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp) { SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedWDTState *s = ASPEED_WDT(dev); - Error *err = NULL; - Object *obj; - obj = object_property_get_link(OBJECT(dev), "scu", &err); - if (!obj) { - error_propagate(errp, err); - error_prepend(errp, "required link 'scu' not found: "); - return; - } - s->scu = ASPEED_SCU(obj); + assert(s->scu); s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, aspeed_wdt_timer_expired, dev); @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp) sysbus_init_mmio(sbd, &s->iomem); } +static Property aspeed_wdt_properties[] = { + DEFINE_PROP_LINK("scu", AspeedWDTState, scu, TYPE_ASPEED_SCU, + AspeedSCUState *), + DEFINE_PROP_END_OF_LIST(), +}; + static void aspeed_wdt_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_class_init(ObjectClass *klass, void *data) dc->reset = aspeed_wdt_reset; set_bit(DEVICE_CATEGORY_MISC, dc->categories); dc->vmsd = &vmstate_aspeed_wdt; + dc->props = aspeed_wdt_properties; } static const TypeInfo aspeed_wdt_info = { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed MII model has a link pointing to its associated FTGMAC100 NIC in the machine. Change the "nic" property definition so that it explicitly sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-18-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed_ast2600.c | 5 ++--- hw/net/ftgmac100.c | 19 +++++++++---------- 2 files changed, 11 insertions(+), 13 deletions(-) diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) sysbus_init_child_obj(obj, "mii[*]", &s->mii[i], sizeof(s->mii[i]), TYPE_ASPEED_MII); - object_property_add_const_link(OBJECT(&s->mii[i]), "nic", - OBJECT(&s->ftgmac100[i]), - &error_abort); } sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma), @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); + object_property_set_link(OBJECT(&s->mii[i]), OBJECT(&s->ftgmac100[i]), + "nic", &error_abort); object_property_set_bool(OBJECT(&s->mii[i]), true, "realized", &err); if (err) { diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ static void aspeed_mii_realize(DeviceState *dev, Error **errp) { AspeedMiiState *s = ASPEED_MII(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - Object *obj; - Error *local_err = NULL; - obj = object_property_get_link(OBJECT(dev), "nic", &local_err); - if (!obj) { - error_propagate(errp, local_err); - error_prepend(errp, "required link 'nic' not found: "); - return; - } - - s->nic = FTGMAC100(obj); + assert(s->nic); memory_region_init_io(&s->iomem, OBJECT(dev), &aspeed_mii_ops, s, TYPE_ASPEED_MII, 0x8); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_mii = { VMSTATE_END_OF_LIST() } }; + +static Property aspeed_mii_properties[] = { + DEFINE_PROP_LINK("nic", AspeedMiiState, nic, TYPE_FTGMAC100, + FTGMAC100State *), + DEFINE_PROP_END_OF_LIST(), +}; + static void aspeed_mii_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void aspeed_mii_class_init(ObjectClass *klass, void *data) dc->reset = aspeed_mii_reset; dc->realize = aspeed_mii_realize; dc->desc = "Aspeed MII controller"; + dc->props = aspeed_mii_properties; } static const TypeInfo aspeed_mii_info = { -- 2.20.1 From: Marc Zyngier <maz@kernel.org> HCR_EL2.TID2 mandates that access from EL1 to CTR_EL0, CCSIDR_EL1, CCSIDR2_EL1, CLIDR_EL1, CSSELR_EL1 are trapped to EL2, and QEMU completely ignores it, making it impossible for hypervisors to virtualize the cache hierarchy. Do the right thing by trapping to EL2 if HCR_EL2.TID2 is set. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-2-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) raw_write(env, ri, value); } +static CPAccessResult access_aa64_tid2(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID2)) { + return CP_ACCESS_TRAP_EL2; + } + + return CP_ACCESS_OK; +} + static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .writefn = pmintenclr_write }, { .name = "CCSIDR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0, - .access = PL1_R, .readfn = ccsidr_read, .type = ARM_CP_NO_RAW }, + .access = PL1_R, + .accessfn = access_aa64_tid2, + .readfn = ccsidr_read, .type = ARM_CP_NO_RAW }, { .name = "CSSELR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0, - .access = PL1_RW, .writefn = csselr_write, .resetvalue = 0, + .access = PL1_RW, + .accessfn = access_aa64_tid2, + .writefn = csselr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s), offsetof(CPUARMState, cp15.csselr_ns) } }, /* Auxiliary ID register: this actually has an IMPDEF value but for now @@ -XXX,XX +XXX,XX @@ static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_UCT)) { return CP_ACCESS_TRAP; } + + if (arm_current_el(env) < 2 && arm_hcr_el2_eff(env) & HCR_TID2) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; } @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo clidr = { .name = "CLIDR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1, - .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->clidr + .access = PL1_R, .type = ARM_CP_CONST, + .accessfn = access_aa64_tid2, + .resetvalue = cpu->clidr }; define_one_arm_cp_reg(cpu, &clidr); define_arm_cp_regs(cpu, v7_cp_reginfo); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) /* These are common to v8 and pre-v8 */ { .name = "CTR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 1, - .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->ctr }, + .access = PL1_R, .accessfn = ctr_el0_access, + .type = ARM_CP_CONST, .resetvalue = cpu->ctr }, { .name = "CTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 0, .crm = 0, .access = PL0_R, .accessfn = ctr_el0_access, -- 2.20.1 From: Marc Zyngier <maz@kernel.org> HCR_EL2.TID1 mandates that access from EL1 to REVIDR_EL1, AIDR_EL1 (and their 32bit equivalents) as well as TCMTR, TLBTR are trapped to EL2. QEMU ignores it, making it harder for a hypervisor to virtualize the HW (though to be fair, no known hypervisor actually cares). Do the right thing by trapping to EL2 if HCR_EL2.TID1 is set. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-3-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 36 ++++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) return ret; } +static CPAccessResult access_aa64_tid1(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID1)) { + return CP_ACCESS_TRAP_EL2; + } + + return CP_ACCESS_OK; +} + +static CPAccessResult access_aa32_tid1(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_feature(env, ARM_FEATURE_V8)) { + return access_aa64_tid1(env, ri, isread); + } + + return CP_ACCESS_OK; +} + static const ARMCPRegInfo v7_cp_reginfo[] = { /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */ { .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { */ { .name = "AIDR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 7, - .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_R, .type = ARM_CP_CONST, + .accessfn = access_aa64_tid1, + .resetvalue = 0 }, /* Auxiliary fault status registers: these also are IMPDEF, and we * choose to RAZ/WI for all cores. */ @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .resetvalue = cpu->midr }, { .name = "REVIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 6, - .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, + .access = PL1_R, + .accessfn = access_aa64_tid1, + .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, REGINFO_SENTINEL }; ARMCPRegInfo id_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) /* TCMTR and TLBTR exist in v8 but have no 64-bit versions */ { .name = "TCMTR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 2, - .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_R, + .accessfn = access_aa32_tid1, + .type = ARM_CP_CONST, .resetvalue = 0 }, REGINFO_SENTINEL }; /* TLBTR is specific to VMSA */ ARMCPRegInfo id_tlbtr_reginfo = { .name = "TLBTR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 3, - .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0, + .access = PL1_R, + .accessfn = access_aa32_tid1, + .type = ARM_CP_CONST, .resetvalue = 0, }; /* MPUIR is specific to PMSA V6+ */ ARMCPRegInfo id_mpuir_reginfo = { -- 2.20.1 From: Marc Zyngier <maz@kernel.org> HCR_EL2.TID3 requires that AArch32 reads of MVFR[012] are trapped to EL2, and HCR_EL2.TID0 does the same for reads of FPSID. In order to handle this, introduce a new TCG helper function that checks for these control bits before executing the VMRC instruction. Tested with a hacked-up version of KVM/arm64 that sets the control bits for 32bit guests. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-4-maz@kernel.org [PMM: move helper declaration to helper.h; make it TCG_CALL_NO_WG] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 ++ target/arm/translate-vfp.inc.c | 20 ++++++++++++++++---- target/arm/vfp_helper.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 47 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(rintd, TCG_CALL_NO_RWG, f64, f64, ptr) DEF_HELPER_FLAGS_2(vjcvt, TCG_CALL_NO_RWG, i32, f64, env) DEF_HELPER_FLAGS_2(fjcvtzs, TCG_CALL_NO_RWG, i64, f64, ptr) +DEF_HELPER_FLAGS_3(check_hcr_el2_trap, TCG_CALL_NO_WG, void, env, i32, i32) + /* neon_helper.c */ DEF_HELPER_FLAGS_3(neon_qadd_u8, TCG_CALL_NO_RWG, i32, env, i32, i32) DEF_HELPER_FLAGS_3(neon_qadd_s8, TCG_CALL_NO_RWG, i32, env, i32, i32) diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.inc.c +++ b/target/arm/translate-vfp.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) if (a->l) { /* VMRS, move VFP special register to gp register */ switch (a->reg) { - case ARM_VFP_FPSID: - case ARM_VFP_FPEXC: - case ARM_VFP_FPINST: - case ARM_VFP_FPINST2: case ARM_VFP_MVFR0: case ARM_VFP_MVFR1: case ARM_VFP_MVFR2: + case ARM_VFP_FPSID: + if (s->current_el == 1) { + TCGv_i32 tcg_reg, tcg_rt; + + gen_set_condexec(s); + gen_set_pc_im(s, s->pc_curr); + tcg_reg = tcg_const_i32(a->reg); + tcg_rt = tcg_const_i32(a->rt); + gen_helper_check_hcr_el2_trap(cpu_env, tcg_rt, tcg_reg); + tcg_temp_free_i32(tcg_reg); + tcg_temp_free_i32(tcg_rt); + } + /* fall through */ + case ARM_VFP_FPEXC: + case ARM_VFP_FPINST: + case ARM_VFP_FPINST2: tmp = load_cpu_field(vfp.xregs[a->reg]); break; case ARM_VFP_FPSCR: diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ float64 HELPER(frint64_d)(float64 f, void *fpst) return frint_d(f, fpst, 64); } +void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg) +{ + uint32_t syndrome; + + switch (reg) { + case ARM_VFP_MVFR0: + case ARM_VFP_MVFR1: + case ARM_VFP_MVFR2: + if (!(arm_hcr_el2_eff(env) & HCR_TID3)) { + return; + } + break; + case ARM_VFP_FPSID: + if (!(arm_hcr_el2_eff(env) & HCR_TID0)) { + return; + } + break; + default: + g_assert_not_reached(); + } + + syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT) + | ARM_EL_IL + | (1 << 24) | (0xe << 20) | (7 << 14) + | (reg << 10) | (rt << 5) | 1); + + raise_exception(env, EXCP_HYP_TRAP, syndrome, 2); +} + #endif -- 2.20.1 From: Marc Zyngier <maz@kernel.org> HSTR_EL2 offers a way to trap ranges of CP15 system register accesses to EL2, and it looks like this register is completely ignored by QEMU. To avoid adding extra .accessfn filters all over the place (which would have a direct performance impact), let's add a new TB flag that gets set whenever HSTR_EL2 is non-zero and that QEMU translates a context where this trap has a chance to apply, and only generate the extra access check if the hypervisor is actively using this feature. Tested with a hand-crafted KVM guest accessing CBAR. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-5-maz@kernel.org [PMM: use is_a64(); fix comment syntax] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 2 ++ target/arm/helper.c | 6 ++++++ target/arm/op_helper.c | 22 ++++++++++++++++++++++ target/arm/translate.c | 3 ++- 5 files changed, 34 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Partially cached, minus FPEXC. */ FIELD(TBFLAG_A32, CONDEXEC, 8, 8) /* Not cached. */ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +FIELD(TBFLAG_A32, HSTR_ACTIVE, 17, 1) + /* For M profile only, set if FPCCR.LSPACT is set */ FIELD(TBFLAG_A32, LSPACT, 18, 1) /* Not cached. */ /* For M profile only, set if we must create a new FP context */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool pauth_active; /* True with v8.5-BTI and SCTLR_ELx.BT* set. */ bool bt; + /* True if any CP15 access is trapped by HSTR_EL2 */ + bool hstr_active; /* * >= 0, a copy of PSTATE.BTYPE, which will be 0 without v8.5-BTI. * < 0, set by the current instruction. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, if (arm_el_is_aa64(env, 1)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } + + if (arm_current_el(env) < 2 && env->cp15.hstr_el2 && + (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, HSTR_ACTIVE, 1); + } + return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(access_check_cp_reg)(CPUARMState *env, void *rip, uint32_t syndrome, raise_exception(env, EXCP_UDEF, syndrome, exception_target_el(env)); } + /* + * Check for an EL2 trap due to HSTR_EL2. We expect EL0 accesses + * to sysregs non accessible at EL0 to have UNDEF-ed already. + */ + if (!is_a64(env) && arm_current_el(env) < 2 && ri->cp == 15 && + (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { + uint32_t mask = 1 << ri->crn; + + if (ri->type & ARM_CP_64BIT) { + mask = 1 << ri->crm; + } + + /* T4 and T14 are RES0 */ + mask &= ~((1 << 4) | (1 << 14)); + + if (env->cp15.hstr_el2 & mask) { + target_el = 2; + goto exept; + } + } + if (!ri->accessfn) { return; } @@ -XXX,XX +XXX,XX @@ void HELPER(access_check_cp_reg)(CPUARMState *env, void *rip, uint32_t syndrome, g_assert_not_reached(); } +exept: raise_exception(env, EXCP_UDEF, syndrome, target_el); } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn) return 1; } - if (ri->accessfn || + if (s->hstr_active || ri->accessfn || (arm_dc_feature(s, ARM_FEATURE_XSCALE) && cpnum < 14)) { /* Emit code to perform further access permissions checks at * runtime; this may result in an exception. @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) !arm_el_is_aa64(env, 3); dc->thumb = FIELD_EX32(tb_flags, TBFLAG_A32, THUMB); dc->sctlr_b = FIELD_EX32(tb_flags, TBFLAG_A32, SCTLR_B); + dc->hstr_active = FIELD_EX32(tb_flags, TBFLAG_A32, HSTR_ACTIVE); dc->be_data = FIELD_EX32(tb_flags, TBFLAG_ANY, BE_DATA) ? MO_BE : MO_LE; condexec = FIELD_EX32(tb_flags, TBFLAG_A32, CONDEXEC); dc->condexec_mask = (condexec & 0xf) << 1; -- 2.20.1 From: Marc Zyngier <maz@kernel.org> QEMU lacks the minimum Jazelle implementation that is required by the architecture (everything is RAZ or RAZ/WI). Add it together with the HCR_EL2.TID0 trapping that goes with it. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-6-maz@kernel.org [PMM: moved ARMCPRegInfo array to file scope, marked it 'static global', moved new condition down in register_cp_regs_for_features() to go with other feature things rather than up with the v6/v7/v8 stuff] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_aa32_tid3(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +static CPAccessResult access_jazelle(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID0)) { + return CP_ACCESS_TRAP_EL2; + } + + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo jazelle_regs[] = { + { .name = "JIDR", + .cp = 14, .crn = 0, .crm = 0, .opc1 = 7, .opc2 = 0, + .access = PL1_R, .accessfn = access_jazelle, + .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "JOSCR", + .cp = 14, .crn = 1, .crm = 0, .opc1 = 7, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "JMCR", + .cp = 14, .crn = 2, .crm = 0, .opc1 = 7, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + REGINFO_SENTINEL +}; + void register_cp_regs_for_features(ARMCPU *cpu) { /* Register all the coprocessor registers based on feature bits */ @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (arm_feature(env, ARM_FEATURE_LPAE)) { define_arm_cp_regs(cpu, lpae_cp_reginfo); } + if (cpu_isar_feature(jazelle, cpu)) { + define_arm_cp_regs(cpu, jazelle_regs); + } /* Slightly awkwardly, the OMAP and StrongARM cores need all of * cp15 crn=0 to be writes-ignored, whereas for other cores they should * be read-only (ie write causes UNDEF exception). -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> This change ensures that the FPU can be accessed in Non-Secure mode when the CPU core is reset using the arm_set_cpu_on() function call. The NSACR.{CP11,CP10} bits define the exception level required to access the FPU in Non-Secure mode. Without these bits set, the CPU will give an undefined exception trap on the first FPU access for the secondary cores under Linux. This is necessary because in this power-control codepath QEMU is effectively emulating a bit of EL3 firmware, and has to set the CPU up as the EL3 firmware would. Fixes: fc1120a7f5 Cc: qemu-stable@nongnu.org Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> [PMM: added clarifying para to commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/arm-powerctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/arm-powerctl.c b/target/arm/arm-powerctl.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-powerctl.c +++ b/target/arm/arm-powerctl.c @@ -XXX,XX +XXX,XX @@ static void arm_set_cpu_on_async_work(CPUState *target_cpu_state, /* Processor is not in secure mode */ target_cpu->env.cp15.scr_el3 |= SCR_NS; + /* Set NSACR.{CP11,CP10} so NS can access the FPU */ + target_cpu->env.cp15.nsacr |= 3 << 10; + /* * If QEMU is providing the equivalent of EL3 firmware, then we need * to make sure a CPU targeting EL2 comes out of reset with a -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> Add probe_read alongside the write probing equivalent. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191121000843.24844-2-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/exec-all.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -XXX,XX +XXX,XX @@ static inline void *probe_write(CPUArchState *env, target_ulong addr, int size, return probe_access(env, addr, size, MMU_DATA_STORE, mmu_idx, retaddr); } +static inline void *probe_read(CPUArchState *env, target_ulong addr, int size, + int mmu_idx, uintptr_t retaddr) +{ + return probe_access(env, addr, size, MMU_DATA_LOAD, mmu_idx, retaddr); +} + #define CODE_GEN_ALIGN 16 /* must be >= of the size of a icache line */ /* Estimated block size for TB allocation. */ -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> Add an option to trigger memory writeback to sync given memory region with the corresponding backing store, case one is available. This extends the support for persistent memory, allowing syncing on-demand. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191121000843.24844-3-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/memory.h | 6 ++++++ include/exec/ram_addr.h | 8 ++++++++ include/qemu/cutils.h | 1 + exec.c | 36 ++++++++++++++++++++++++++++++++++++ memory.c | 12 ++++++++++++ util/cutils.c | 38 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 101 insertions(+) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ void *memory_region_get_ram_ptr(MemoryRegion *mr); */ void memory_region_ram_resize(MemoryRegion *mr, ram_addr_t newsize, Error **errp); +/** + * memory_region_do_writeback: Trigger writeback for selected address range + * [addr, addr + size] + * + */ +void memory_region_do_writeback(MemoryRegion *mr, hwaddr addr, hwaddr size); /** * memory_region_set_log: Turn dirty logging on or off for a region. diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/ram_addr.h +++ b/include/exec/ram_addr.h @@ -XXX,XX +XXX,XX @@ void qemu_ram_free(RAMBlock *block); int qemu_ram_resize(RAMBlock *block, ram_addr_t newsize, Error **errp); +void qemu_ram_writeback(RAMBlock *block, ram_addr_t start, ram_addr_t length); + +/* Clear whole block of mem */ +static inline void qemu_ram_block_writeback(RAMBlock *block) +{ + qemu_ram_writeback(block, 0, block->used_length); +} + #define DIRTY_CLIENTS_ALL ((1 << DIRTY_MEMORY_NUM) - 1) #define DIRTY_CLIENTS_NOCODE (DIRTY_CLIENTS_ALL & ~(1 << DIRTY_MEMORY_CODE)) diff --git a/include/qemu/cutils.h b/include/qemu/cutils.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/cutils.h +++ b/include/qemu/cutils.h @@ -XXX,XX +XXX,XX @@ const char *qemu_strchrnul(const char *s, int c); #endif time_t mktimegm(struct tm *tm); int qemu_fdatasync(int fd); +int qemu_msync(void *addr, size_t length, int fd); int fcntl_setfl(int fd, int flag); int qemu_parse_fd(const char *param); int qemu_strtoi(const char *nptr, const char **endptr, int base, diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ #include "exec/ram_addr.h" #include "exec/log.h" +#include "qemu/pmem.h" + #include "migration/vmstate.h" #include "qemu/range.h" @@ -XXX,XX +XXX,XX @@ int qemu_ram_resize(RAMBlock *block, ram_addr_t newsize, Error **errp) return 0; } +/* + * Trigger sync on the given ram block for range [start, start + length] + * with the backing store if one is available. + * Otherwise no-op. + * @Note: this is supposed to be a synchronous op. + */ +void qemu_ram_writeback(RAMBlock *block, ram_addr_t start, ram_addr_t length) +{ + void *addr = ramblock_ptr(block, start); + + /* The requested range should fit in within the block range */ + g_assert((start + length) <= block->used_length); + +#ifdef CONFIG_LIBPMEM + /* The lack of support for pmem should not block the sync */ + if (ramblock_is_pmem(block)) { + pmem_persist(addr, length); + return; + } +#endif + if (block->fd >= 0) { + /** + * Case there is no support for PMEM or the memory has not been + * specified as persistent (or is not one) - use the msync. + * Less optimal but still achieves the same goal + */ + if (qemu_msync(addr, length, block->fd)) { + warn_report("%s: failed to sync memory range: start: " + RAM_ADDR_FMT " length: " RAM_ADDR_FMT, + __func__, start, length); + } + } +} + /* Called with ram_list.mutex held */ static void dirty_memory_extend(ram_addr_t old_ram_size, ram_addr_t new_ram_size) diff --git a/memory.c b/memory.c index XXXXXXX..XXXXXXX 100644 --- a/memory.c +++ b/memory.c @@ -XXX,XX +XXX,XX @@ void memory_region_ram_resize(MemoryRegion *mr, ram_addr_t newsize, Error **errp qemu_ram_resize(mr->ram_block, newsize, errp); } + +void memory_region_do_writeback(MemoryRegion *mr, hwaddr addr, hwaddr size) +{ + /* + * Might be extended case needed to cover + * different types of memory regions + */ + if (mr->ram_block && mr->dirty_log_mask) { + qemu_ram_writeback(mr->ram_block, addr, size); + } +} + /* * Call proper memory listeners about the change on the newly * added/removed CoalescedMemoryRange. diff --git a/util/cutils.c b/util/cutils.c index XXXXXXX..XXXXXXX 100644 --- a/util/cutils.c +++ b/util/cutils.c @@ -XXX,XX +XXX,XX @@ int qemu_fdatasync(int fd) #endif } +/** + * Sync changes made to the memory mapped file back to the backing + * storage. For POSIX compliant systems this will fallback + * to regular msync call. Otherwise it will trigger whole file sync + * (including the metadata case there is no support to skip that otherwise) + * + * @addr - start of the memory area to be synced + * @length - length of the are to be synced + * @fd - file descriptor for the file to be synced + * (mandatory only for POSIX non-compliant systems) + */ +int qemu_msync(void *addr, size_t length, int fd) +{ +#ifdef CONFIG_POSIX + size_t align_mask = ~(qemu_real_host_page_size - 1); + + /** + * There are no strict reqs as per the length of mapping + * to be synced. Still the length needs to follow the address + * alignment changes. Additionally - round the size to the multiple + * of PAGE_SIZE + */ + length += ((uintptr_t)addr & (qemu_real_host_page_size - 1)); + length = (length + ~align_mask) & align_mask; + + addr = (void *)((uintptr_t)addr & align_mask); + + return msync(addr, length, MS_SYNC); +#else /* CONFIG_POSIX */ + /** + * Perform the sync based on the file descriptor + * The sync range will most probably be wider than the one + * requested - but it will still get the job done + */ + return qemu_fdatasync(fd); +#endif /* CONFIG_POSIX */ +} + #ifndef _WIN32 /* Sets a specific flag */ int fcntl_setfl(int fd, int flag) -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> Switch to ram block writeback for pmem migration. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20191121000843.24844-4-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- migration/ram.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/migration/ram.c b/migration/ram.c index XXXXXXX..XXXXXXX 100644 --- a/migration/ram.c +++ b/migration/ram.c @@ -XXX,XX +XXX,XX @@ #include "qemu/bitops.h" #include "qemu/bitmap.h" #include "qemu/main-loop.h" -#include "qemu/pmem.h" #include "xbzrle.h" #include "ram.h" #include "migration.h" @@ -XXX,XX +XXX,XX @@ static int ram_load_cleanup(void *opaque) RAMBlock *rb; RAMBLOCK_FOREACH_NOT_IGNORED(rb) { - if (ramblock_is_pmem(rb)) { - pmem_persist(rb->host, rb->used_length); - } + qemu_ram_block_writeback(rb); } xbzrle_load_cleanup(); -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> ARMv8.2 introduced support for Data Cache Clean instructions to PoP (point-of-persistence) - DC CVAP and PoDP (point-of-deep-persistence) - DV CVADP. Both specify conceptual points in a memory system where all writes that are to reach them are considered persistent. The support provided considers both to be actually the same so there is no distinction between the two. If none is available (there is no backing store for given memory) both will result in Data Cache Clean up to the point of coherency. Otherwise sync for the specified range shall be performed. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191121000843.24844-5-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 10 ++++++++ linux-user/elfload.c | 2 ++ target/arm/cpu64.c | 1 + target/arm/helper.c | 56 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_frint(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, FRINTTS) != 0; } +static inline bool isar_feature_aa64_dcpop(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, DPB) != 0; +} + +static inline bool isar_feature_aa64_dcpodp(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, DPB) >= 2; +} + static inline bool isar_feature_aa64_fp16(const ARMISARegisters *id) { /* We always set the AdvSIMD and FP fields identically wrt FP16. */ diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE_ID(aa64_jscvt, ARM_HWCAP_A64_JSCVT); GET_FEATURE_ID(aa64_sb, ARM_HWCAP_A64_SB); GET_FEATURE_ID(aa64_condm_4, ARM_HWCAP_A64_FLAGM); + GET_FEATURE_ID(aa64_dcpop, ARM_HWCAP_A64_DCPOP); return hwcaps; } @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap2(void) ARMCPU *cpu = ARM_CPU(thread_cpu); uint32_t hwcaps = 0; + GET_FEATURE_ID(aa64_dcpodp, ARM_HWCAP2_A64_DCPODP); GET_FEATURE_ID(aa64_condm_5, ARM_HWCAP2_A64_FLAGM2); GET_FEATURE_ID(aa64_frint, ARM_HWCAP2_A64_FRINT); diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64isar0 = t; t = cpu->isar.id_aa64isar1; + t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); t = FIELD_DP64(t, ID_AA64ISAR1, APA, 1); /* PAuth, architected only */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo rndr_reginfo[] = { .access = PL0_R, .readfn = rndr_readfn }, REGINFO_SENTINEL }; + +#ifndef CONFIG_USER_ONLY +static void dccvap_writefn(CPUARMState *env, const ARMCPRegInfo *opaque, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + /* CTR_EL0 System register -> DminLine, bits [19:16] */ + uint64_t dline_size = 4 << ((cpu->ctr >> 16) & 0xF); + uint64_t vaddr_in = (uint64_t) value; + uint64_t vaddr = vaddr_in & ~(dline_size - 1); + void *haddr; + int mem_idx = cpu_mmu_index(env, false); + + /* This won't be crossing page boundaries */ + haddr = probe_read(env, vaddr, dline_size, mem_idx, GETPC()); + if (haddr) { + + ram_addr_t offset; + MemoryRegion *mr; + + /* RCU lock is already being held */ + mr = memory_region_from_host(haddr, &offset); + + if (mr) { + memory_region_do_writeback(mr, offset, dline_size); + } + } +} + +static const ARMCPRegInfo dcpop_reg[] = { + { .name = "DC_CVAP", .state = ARM_CP_STATE_AA64, + .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, + .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, + .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + REGINFO_SENTINEL +}; + +static const ARMCPRegInfo dcpodp_reg[] = { + { .name = "DC_CVADP", .state = ARM_CP_STATE_AA64, + .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, + .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, + .accessfn = aa64_cacheop_access, .writefn = dccvap_writefn }, + REGINFO_SENTINEL +}; +#endif /*CONFIG_USER_ONLY*/ + #endif static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_rndr, cpu)) { define_arm_cp_regs(cpu, rndr_reginfo); } +#ifndef CONFIG_USER_ONLY + /* Data Cache clean instructions up to PoP */ + if (cpu_isar_feature(aa64_dcpop, cpu)) { + define_one_arm_cp_reg(cpu, dcpop_reg); + + if (cpu_isar_feature(aa64_dcpodp, cpu)) { + define_one_arm_cp_reg(cpu, dcpodp_reg); + } + } +#endif /*CONFIG_USER_ONLY*/ #endif /* -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Make the gic a field in the machine state, and instead of filling an array of qemu_irq and passing it around, directly call qdev_get_gpio_in() on the gic field. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191206162303.30338-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 86 +++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 44 deletions(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ typedef struct { void *fdt; int fdt_size; int psci_conduit; + DeviceState *gic; PFlashCFI01 *flash[2]; } SBSAMachineState; @@ -XXX,XX +XXX,XX @@ static void create_secure_ram(SBSAMachineState *sms, memory_region_add_subregion(secure_sysmem, base, secram); } -static void create_gic(SBSAMachineState *sms, qemu_irq *pic) +static void create_gic(SBSAMachineState *sms) { unsigned int smp_cpus = MACHINE(sms)->smp.cpus; - DeviceState *gicdev; SysBusDevice *gicbusdev; const char *gictype; uint32_t redist0_capacity, redist0_count; @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, qemu_irq *pic) gictype = gicv3_class_name(); - gicdev = qdev_create(NULL, gictype); - qdev_prop_set_uint32(gicdev, "revision", 3); - qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus); + sms->gic = qdev_create(NULL, gictype); + qdev_prop_set_uint32(sms->gic, "revision", 3); + qdev_prop_set_uint32(sms->gic, "num-cpu", smp_cpus); /* * Note that the num-irq property counts both internal and external * interrupts; there are always 32 of the former (mandated by GIC spec). */ - qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32); - qdev_prop_set_bit(gicdev, "has-security-extensions", true); + qdev_prop_set_uint32(sms->gic, "num-irq", NUM_IRQS + 32); + qdev_prop_set_bit(sms->gic, "has-security-extensions", true); redist0_capacity = sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE; redist0_count = MIN(smp_cpus, redist0_capacity); - qdev_prop_set_uint32(gicdev, "len-redist-region-count", 1); - qdev_prop_set_uint32(gicdev, "redist-region-count[0]", redist0_count); + qdev_prop_set_uint32(sms->gic, "len-redist-region-count", 1); + qdev_prop_set_uint32(sms->gic, "redist-region-count[0]", redist0_count); - qdev_init_nofail(gicdev); - gicbusdev = SYS_BUS_DEVICE(gicdev); + qdev_init_nofail(sms->gic); + gicbusdev = SYS_BUS_DEVICE(sms->gic); sysbus_mmio_map(gicbusdev, 0, sbsa_ref_memmap[SBSA_GIC_DIST].base); sysbus_mmio_map(gicbusdev, 1, sbsa_ref_memmap[SBSA_GIC_REDIST].base); @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, qemu_irq *pic) for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, - qdev_get_gpio_in(gicdev, + qdev_get_gpio_in(sms->gic, ppibase + timer_irq[irq])); } qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, - qdev_get_gpio_in(gicdev, ppibase + qdev_get_gpio_in(sms->gic, ppibase + ARCH_GIC_MAINT_IRQ)); qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(gicdev, ppibase + qdev_get_gpio_in(sms->gic, ppibase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, qemu_irq *pic) sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus, qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); } - - for (i = 0; i < NUM_IRQS; i++) { - pic[i] = qdev_get_gpio_in(gicdev, i); - } } -static void create_uart(const SBSAMachineState *sms, qemu_irq *pic, int uart, +static void create_uart(const SBSAMachineState *sms, int uart, MemoryRegion *mem, Chardev *chr) { hwaddr base = sbsa_ref_memmap[uart].base; @@ -XXX,XX +XXX,XX @@ static void create_uart(const SBSAMachineState *sms, qemu_irq *pic, int uart, qdev_init_nofail(dev); memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); - sysbus_connect_irq(s, 0, pic[irq]); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq)); } -static void create_rtc(const SBSAMachineState *sms, qemu_irq *pic) +static void create_rtc(const SBSAMachineState *sms) { hwaddr base = sbsa_ref_memmap[SBSA_RTC].base; int irq = sbsa_ref_irqmap[SBSA_RTC]; - sysbus_create_simple("pl031", base, pic[irq]); + sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic, irq)); } static DeviceState *gpio_key_dev; @@ -XXX,XX +XXX,XX @@ static Notifier sbsa_ref_powerdown_notifier = { .notify = sbsa_ref_powerdown_req }; -static void create_gpio(const SBSAMachineState *sms, qemu_irq *pic) +static void create_gpio(const SBSAMachineState *sms) { DeviceState *pl061_dev; hwaddr base = sbsa_ref_memmap[SBSA_GPIO].base; int irq = sbsa_ref_irqmap[SBSA_GPIO]; - pl061_dev = sysbus_create_simple("pl061", base, pic[irq]); + pl061_dev = sysbus_create_simple("pl061", base, + qdev_get_gpio_in(sms->gic, irq)); gpio_key_dev = sysbus_create_simple("gpio-key", -1, qdev_get_gpio_in(pl061_dev, 3)); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const SBSAMachineState *sms, qemu_irq *pic) qemu_register_powerdown_notifier(&sbsa_ref_powerdown_notifier); } -static void create_ahci(const SBSAMachineState *sms, qemu_irq *pic) +static void create_ahci(const SBSAMachineState *sms) { hwaddr base = sbsa_ref_memmap[SBSA_AHCI].base; int irq = sbsa_ref_irqmap[SBSA_AHCI]; @@ -XXX,XX +XXX,XX @@ static void create_ahci(const SBSAMachineState *sms, qemu_irq *pic) qdev_prop_set_uint32(dev, "num-ports", NUM_SATA_PORTS); qdev_init_nofail(dev); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); - sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(sms->gic, irq)); sysahci = SYSBUS_AHCI(dev); ahci = &sysahci->ahci; @@ -XXX,XX +XXX,XX @@ static void create_ahci(const SBSAMachineState *sms, qemu_irq *pic) } } -static void create_ehci(const SBSAMachineState *sms, qemu_irq *pic) +static void create_ehci(const SBSAMachineState *sms) { hwaddr base = sbsa_ref_memmap[SBSA_EHCI].base; int irq = sbsa_ref_irqmap[SBSA_EHCI]; - sysbus_create_simple("platform-ehci-usb", base, pic[irq]); + sysbus_create_simple("platform-ehci-usb", base, + qdev_get_gpio_in(sms->gic, irq)); } -static void create_smmu(const SBSAMachineState *sms, qemu_irq *pic, - PCIBus *bus) +static void create_smmu(const SBSAMachineState *sms, PCIBus *bus) { hwaddr base = sbsa_ref_memmap[SBSA_SMMU].base; int irq = sbsa_ref_irqmap[SBSA_SMMU]; @@ -XXX,XX +XXX,XX @@ static void create_smmu(const SBSAMachineState *sms, qemu_irq *pic, qdev_init_nofail(dev); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); for (i = 0; i < NUM_SMMU_IRQS; i++) { - sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, + qdev_get_gpio_in(sms->gic, irq + 1)); } } -static void create_pcie(SBSAMachineState *sms, qemu_irq *pic) +static void create_pcie(SBSAMachineState *sms) { hwaddr base_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].base; hwaddr size_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].size; @@ -XXX,XX +XXX,XX @@ static void create_pcie(SBSAMachineState *sms, qemu_irq *pic) sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio); for (i = 0; i < GPEX_NUM_IRQS; i++) { - sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, + qdev_get_gpio_in(sms->gic, irq + 1)); gpex_set_irq_num(GPEX_HOST(dev), i, irq + i); } @@ -XXX,XX +XXX,XX @@ static void create_pcie(SBSAMachineState *sms, qemu_irq *pic) pci_create_simple(pci->bus, -1, "VGA"); - create_smmu(sms, pic, pci->bus); + create_smmu(sms, pci->bus); } static void *sbsa_ref_dtb(const struct arm_boot_info *binfo, int *fdt_size) @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) bool firmware_loaded; const CPUArchIdList *possible_cpus; int n, sbsa_max_cpus; - qemu_irq pic[NUM_IRQS]; if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) { error_report("sbsa-ref: CPU type other than the built-in " @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) create_secure_ram(sms, secure_sysmem); - create_gic(sms, pic); + create_gic(sms); - create_uart(sms, pic, SBSA_UART, sysmem, serial_hd(0)); - create_uart(sms, pic, SBSA_SECURE_UART, secure_sysmem, serial_hd(1)); + create_uart(sms, SBSA_UART, sysmem, serial_hd(0)); + create_uart(sms, SBSA_SECURE_UART, secure_sysmem, serial_hd(1)); /* Second secure UART for RAS and MM from EL0 */ - create_uart(sms, pic, SBSA_SECURE_UART_MM, secure_sysmem, serial_hd(2)); + create_uart(sms, SBSA_SECURE_UART_MM, secure_sysmem, serial_hd(2)); - create_rtc(sms, pic); + create_rtc(sms); - create_gpio(sms, pic); + create_gpio(sms); - create_ahci(sms, pic); + create_ahci(sms); - create_ehci(sms, pic); + create_ehci(sms); - create_pcie(sms, pic); + create_pcie(sms); sms->bootinfo.ram_size = machine->ram_size; sms->bootinfo.nb_cpus = smp_cpus; -- 2.20.1 From: Heyi Guo <guoheyi@huawei.com> The last argument of AML bit and/or statement is the target variable, so we don't need to use a NULL target and then an additional store operation; using just aml_and() or aml_or() statement is enough. Also update tests/data/acpi/virt/DSDT* to pass "make check". Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-id: 20191209063719.23086-2-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 16 ++++++++-------- tests/data/acpi/virt/DSDT | Bin 18470 -> 18462 bytes tests/data/acpi/virt/DSDT.memhp | Bin 19807 -> 19799 bytes tests/data/acpi/virt/DSDT.numamem | Bin 18470 -> 18462 bytes 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap, aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3")); aml_append(ifctx, aml_store(aml_name("CDW2"), aml_name("SUPP"))); aml_append(ifctx, aml_store(aml_name("CDW3"), aml_name("CTRL"))); - aml_append(ifctx, aml_store(aml_and(aml_name("CTRL"), aml_int(0x1D), NULL), - aml_name("CTRL"))); + aml_append(ifctx, aml_and(aml_name("CTRL"), aml_int(0x1D), + aml_name("CTRL"))); ifctx1 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(0x1)))); - aml_append(ifctx1, aml_store(aml_or(aml_name("CDW1"), aml_int(0x08), NULL), - aml_name("CDW1"))); + aml_append(ifctx1, aml_or(aml_name("CDW1"), aml_int(0x08), + aml_name("CDW1"))); aml_append(ifctx, ifctx1); ifctx1 = aml_if(aml_lnot(aml_equal(aml_name("CDW3"), aml_name("CTRL")))); - aml_append(ifctx1, aml_store(aml_or(aml_name("CDW1"), aml_int(0x10), NULL), - aml_name("CDW1"))); + aml_append(ifctx1, aml_or(aml_name("CDW1"), aml_int(0x10), + aml_name("CDW1"))); aml_append(ifctx, ifctx1); aml_append(ifctx, aml_store(aml_name("CTRL"), aml_name("CDW3"))); @@ -XXX,XX +XXX,XX @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap, aml_append(method, ifctx); elsectx = aml_else(); - aml_append(elsectx, aml_store(aml_or(aml_name("CDW1"), aml_int(4), NULL), - aml_name("CDW1"))); + aml_append(elsectx, aml_or(aml_name("CDW1"), aml_int(4), + aml_name("CDW1"))); aml_append(elsectx, aml_return(aml_arg(3))); aml_append(method, elsectx); aml_append(dev, method); diff --git a/tests/data/acpi/virt/DSDT b/tests/data/acpi/virt/DSDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 133 zcmZ2BfpOjhMlP3Nmk>D*1_q|2iCof5o%I{lJ2{y;?{412x!p#<jWgaq*qNm(o59&7 z+;D-%<VrV7_iE>mARjJS5V=5L(&S9WT970c2Uv;Nq{%?q7$gZ1761tsfcPNsCD{x4 MAmS{W8QoPG0j8@bzW@LL delta 141 zcmbO?fpOUcMlP3Nmk>1%1_q`n6S<_B8XGpMcXBc{-rKy1bGwazA7{LOuro_nHiNTE zxZwi7$(3%F{sq;}AwfP|vJ4<<fzYJMnT!RsAbBnhh%$*ulYv}gkTg_604z}e5&_99 R$zCV`m0@An{L@X95dZ+BD!u>! diff --git a/tests/data/acpi/virt/DSDT.memhp b/tests/data/acpi/virt/DSDT.memhp index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 132 zcmcaVi}Cs_MlP3NmymE@1_ma@iCof*O&is^IGH-{Zr;SX-A2HTGu}VgnWZb6!PzC; zaDm6<N;gaQYUhw3A1+xCxj<mj<V?m|kR%reSc%xA$w1l|Bnc4~00|d>_#p8m*$ep~ L;w+mP-Q(B*s{AMU delta 140 zcmcaUi}C&}MlP3Nmymd01_maViCof*T^rT9IGGynZQjJW-A2HVGu}VgnWZb6!PzC; zaDm_CN;gaYf@<fGARjJS1`xGCXwu|N#)4XqJQoK<nZ%^YK&~-J8Y&?GmM8#;fMk|r QFBE{vurO@?=@!QZ00dYn_y7O^ diff --git a/tests/data/acpi/virt/DSDT.numamem b/tests/data/acpi/virt/DSDT.numamem index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 133 zcmZ2BfpOjhMlP3Nmk>D*1_q|2iCof5o%I{lJ2{y;?{412x!p#<jWgaq*qNm(o59&7 z+;D-%<VrV7_iE>mARjJS5V=5L(&S9WT970c2Uv;Nq{%?q7$gZ1761tsfcPNsCD{x4 MAmS{W8QoPG0j8@bzW@LL delta 141 zcmbO?fpOUcMlP3Nmk>1%1_q`n6S<_B8XGpMcXBc{-rKy1bGwazA7{LOuro_nHiNTE zxZwi7$(3%F{sq;}AwfP|vJ4<<fzYJMnT!RsAbBnhh%$*ulYv}gkTg_604z}e5&_99 R$zCV`m0@An{L@X95dZ+BD!u>! -- 2.20.1 From: Heyi Guo <guoheyi@huawei.com> After the introduction of generic PCIe root port and PCIe-PCI bridge, we will also have SHPC controller on ARM, so just enable SHPC native hot plug. Also update tests/data/acpi/virt/DSDT* to pass "make check". Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-id: 20191209063719.23086-3-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 7 ++++++- tests/data/acpi/virt/DSDT | Bin 18462 -> 18462 bytes tests/data/acpi/virt/DSDT.memhp | Bin 19799 -> 19799 bytes tests/data/acpi/virt/DSDT.numamem | Bin 18462 -> 18462 bytes 4 files changed, 6 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap, aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3")); aml_append(ifctx, aml_store(aml_name("CDW2"), aml_name("SUPP"))); aml_append(ifctx, aml_store(aml_name("CDW3"), aml_name("CTRL"))); - aml_append(ifctx, aml_and(aml_name("CTRL"), aml_int(0x1D), + + /* + * Allow OS control for all 5 features: + * PCIeHotplug SHPCHotplug PME AER PCIeCapability. + */ + aml_append(ifctx, aml_and(aml_name("CTRL"), aml_int(0x1F), aml_name("CTRL"))); ifctx1 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(0x1)))); diff --git a/tests/data/acpi/virt/DSDT b/tests/data/acpi/virt/DSDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmbO?fpOjhMlP3Nmk>D*1_q{tja=*8809zbbW3Ff0C~9xM*si- delta 28 kcmbO?fpOjhMlP3Nmk>D*1_q|2ja=*87-cu_bW3Ff0C~j-M*si- diff --git a/tests/data/acpi/virt/DSDT.memhp b/tests/data/acpi/virt/DSDT.memhp index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmcaUi}Cs_MlP3NmymE@1_mbija=*8809zbbeqQp0Eq|*2mk;8 delta 28 kcmcaUi}Cs_MlP3NmymE@1_ma@ja=*87-cu_beqQp0ErX{2mk;8 diff --git a/tests/data/acpi/virt/DSDT.numamem b/tests/data/acpi/virt/DSDT.numamem index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmbO?fpOjhMlP3Nmk>D*1_q{tja=*8809zbbW3Ff0C~9xM*si- delta 28 kcmbO?fpOjhMlP3Nmk>D*1_q|2ja=*87-cu_bW3Ff0C~j-M*si- -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Make the gic a field in the machine state, and instead of filling an array of qemu_irq and passing it around, directly call qdev_get_gpio_in() on the gic field. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20191209090306.20433-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + hw/arm/virt.c | 109 +++++++++++++++++++++--------------------- 2 files changed, 55 insertions(+), 55 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t iommu_phandle; int psci_conduit; hwaddr highest_gpa; + DeviceState *gic; DeviceState *acpi_dev; Notifier powerdown_notifier; } VirtMachineState; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) } } -static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic) +static inline DeviceState *create_acpi_ged(VirtMachineState *vms) { DeviceState *dev; MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic) sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_ACPI_GED].base); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, vms->memmap[VIRT_PCDIMM_ACPI].base); - sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(vms->gic, irq)); qdev_init_nofail(dev); return dev; } -static void create_its(VirtMachineState *vms, DeviceState *gicdev) +static void create_its(VirtMachineState *vms) { const char *itsclass = its_class_name(); DeviceState *dev; @@ -XXX,XX +XXX,XX @@ static void create_its(VirtMachineState *vms, DeviceState *gicdev) dev = qdev_create(NULL, itsclass); - object_property_set_link(OBJECT(dev), OBJECT(gicdev), "parent-gicv3", + object_property_set_link(OBJECT(dev), OBJECT(vms->gic), "parent-gicv3", &error_abort); qdev_init_nofail(dev); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_GIC_ITS].base); @@ -XXX,XX +XXX,XX @@ static void create_its(VirtMachineState *vms, DeviceState *gicdev) fdt_add_its_gic_node(vms); } -static void create_v2m(VirtMachineState *vms, qemu_irq *pic) +static void create_v2m(VirtMachineState *vms) { int i; int irq = vms->irqmap[VIRT_GIC_V2M]; @@ -XXX,XX +XXX,XX @@ static void create_v2m(VirtMachineState *vms, qemu_irq *pic) qdev_init_nofail(dev); for (i = 0; i < NUM_GICV2M_SPIS; i++) { - sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, + qdev_get_gpio_in(vms->gic, irq + i)); } fdt_add_v2m_gic_node(vms); } -static void create_gic(VirtMachineState *vms, qemu_irq *pic) +static void create_gic(VirtMachineState *vms) { MachineState *ms = MACHINE(vms); /* We create a standalone GIC */ - DeviceState *gicdev; SysBusDevice *gicbusdev; const char *gictype; int type = vms->gic_version, i; @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, qemu_irq *pic) gictype = (type == 3) ? gicv3_class_name() : gic_class_name(); - gicdev = qdev_create(NULL, gictype); - qdev_prop_set_uint32(gicdev, "revision", type); - qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus); + vms->gic = qdev_create(NULL, gictype); + qdev_prop_set_uint32(vms->gic, "revision", type); + qdev_prop_set_uint32(vms->gic, "num-cpu", smp_cpus); /* Note that the num-irq property counts both internal and external * interrupts; there are always 32 of the former (mandated by GIC spec). */ - qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32); + qdev_prop_set_uint32(vms->gic, "num-irq", NUM_IRQS + 32); if (!kvm_irqchip_in_kernel()) { - qdev_prop_set_bit(gicdev, "has-security-extensions", vms->secure); + qdev_prop_set_bit(vms->gic, "has-security-extensions", vms->secure); } if (type == 3) { @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, qemu_irq *pic) nb_redist_regions = virt_gicv3_redist_region_count(vms); - qdev_prop_set_uint32(gicdev, "len-redist-region-count", + qdev_prop_set_uint32(vms->gic, "len-redist-region-count", nb_redist_regions); - qdev_prop_set_uint32(gicdev, "redist-region-count[0]", redist0_count); + qdev_prop_set_uint32(vms->gic, "redist-region-count[0]", redist0_count); if (nb_redist_regions == 2) { uint32_t redist1_capacity = vms->memmap[VIRT_HIGH_GIC_REDIST2].size / GICV3_REDIST_SIZE; - qdev_prop_set_uint32(gicdev, "redist-region-count[1]", + qdev_prop_set_uint32(vms->gic, "redist-region-count[1]", MIN(smp_cpus - redist0_count, redist1_capacity)); } } else { if (!kvm_irqchip_in_kernel()) { - qdev_prop_set_bit(gicdev, "has-virtualization-extensions", + qdev_prop_set_bit(vms->gic, "has-virtualization-extensions", vms->virt); } } - qdev_init_nofail(gicdev); - gicbusdev = SYS_BUS_DEVICE(gicdev); + qdev_init_nofail(vms->gic); + gicbusdev = SYS_BUS_DEVICE(vms->gic); sysbus_mmio_map(gicbusdev, 0, vms->memmap[VIRT_GIC_DIST].base); if (type == 3) { sysbus_mmio_map(gicbusdev, 1, vms->memmap[VIRT_GIC_REDIST].base); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, qemu_irq *pic) for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, - qdev_get_gpio_in(gicdev, + qdev_get_gpio_in(vms->gic, ppibase + timer_irq[irq])); } if (type == 3) { - qemu_irq irq = qdev_get_gpio_in(gicdev, + qemu_irq irq = qdev_get_gpio_in(vms->gic, ppibase + ARCH_GIC_MAINT_IRQ); qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, irq); } else if (vms->virt) { - qemu_irq irq = qdev_get_gpio_in(gicdev, + qemu_irq irq = qdev_get_gpio_in(vms->gic, ppibase + ARCH_GIC_MAINT_IRQ); sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, irq); } qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(gicdev, ppibase + qdev_get_gpio_in(vms->gic, ppibase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, qemu_irq *pic) qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); } - for (i = 0; i < NUM_IRQS; i++) { - pic[i] = qdev_get_gpio_in(gicdev, i); - } - fdt_add_gic_node(vms); if (type == 3 && vms->its) { - create_its(vms, gicdev); + create_its(vms); } else if (type == 2) { - create_v2m(vms, pic); + create_v2m(vms); } } -static void create_uart(const VirtMachineState *vms, qemu_irq *pic, int uart, +static void create_uart(const VirtMachineState *vms, int uart, MemoryRegion *mem, Chardev *chr) { char *nodename; @@ -XXX,XX +XXX,XX @@ static void create_uart(const VirtMachineState *vms, qemu_irq *pic, int uart, qdev_init_nofail(dev); memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); - sysbus_connect_irq(s, 0, pic[irq]); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); nodename = g_strdup_printf("/pl011@%" PRIx64, base); qemu_fdt_add_subnode(vms->fdt, nodename); @@ -XXX,XX +XXX,XX @@ static void create_uart(const VirtMachineState *vms, qemu_irq *pic, int uart, g_free(nodename); } -static void create_rtc(const VirtMachineState *vms, qemu_irq *pic) +static void create_rtc(const VirtMachineState *vms) { char *nodename; hwaddr base = vms->memmap[VIRT_RTC].base; @@ -XXX,XX +XXX,XX @@ static void create_rtc(const VirtMachineState *vms, qemu_irq *pic) int irq = vms->irqmap[VIRT_RTC]; const char compat[] = "arm,pl031\0arm,primecell"; - sysbus_create_simple("pl031", base, pic[irq]); + sysbus_create_simple("pl031", base, qdev_get_gpio_in(vms->gic, irq)); nodename = g_strdup_printf("/pl031@%" PRIx64, base); qemu_fdt_add_subnode(vms->fdt, nodename); @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) +static void create_gpio(const VirtMachineState *vms) { char *nodename; DeviceState *pl061_dev; @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) int irq = vms->irqmap[VIRT_GPIO]; const char compat[] = "arm,pl061\0arm,primecell"; - pl061_dev = sysbus_create_simple("pl061", base, pic[irq]); + pl061_dev = sysbus_create_simple("pl061", base, + qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) g_free(nodename); } -static void create_virtio_devices(const VirtMachineState *vms, qemu_irq *pic) +static void create_virtio_devices(const VirtMachineState *vms) { int i; hwaddr size = vms->memmap[VIRT_MMIO].size; @@ -XXX,XX +XXX,XX @@ static void create_virtio_devices(const VirtMachineState *vms, qemu_irq *pic) int irq = vms->irqmap[VIRT_MMIO] + i; hwaddr base = vms->memmap[VIRT_MMIO].base + i * size; - sysbus_create_simple("virtio-mmio", base, pic[irq]); + sysbus_create_simple("virtio-mmio", base, + qdev_get_gpio_in(vms->gic, irq)); } /* We add dtb nodes in reverse order so that they appear in the finished @@ -XXX,XX +XXX,XX @@ static void create_pcie_irq_map(const VirtMachineState *vms, 0x7 /* PCI irq */); } -static void create_smmu(const VirtMachineState *vms, qemu_irq *pic, +static void create_smmu(const VirtMachineState *vms, PCIBus *bus) { char *node; @@ -XXX,XX +XXX,XX @@ static void create_smmu(const VirtMachineState *vms, qemu_irq *pic, qdev_init_nofail(dev); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); for (i = 0; i < NUM_SMMU_IRQS; i++) { - sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, + qdev_get_gpio_in(vms->gic, irq + i)); } node = g_strdup_printf("/smmuv3@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_smmu(const VirtMachineState *vms, qemu_irq *pic, g_free(node); } -static void create_pcie(VirtMachineState *vms, qemu_irq *pic) +static void create_pcie(VirtMachineState *vms) { hwaddr base_mmio = vms->memmap[VIRT_PCIE_MMIO].base; hwaddr size_mmio = vms->memmap[VIRT_PCIE_MMIO].size; @@ -XXX,XX +XXX,XX @@ static void create_pcie(VirtMachineState *vms, qemu_irq *pic) sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio); for (i = 0; i < GPEX_NUM_IRQS; i++) { - sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, + qdev_get_gpio_in(vms->gic, irq + i)); gpex_set_irq_num(GPEX_HOST(dev), i, irq + i); } @@ -XXX,XX +XXX,XX @@ static void create_pcie(VirtMachineState *vms, qemu_irq *pic) if (vms->iommu) { vms->iommu_phandle = qemu_fdt_alloc_phandle(vms->fdt); - create_smmu(vms, pic, pci->bus); + create_smmu(vms, pci->bus); qemu_fdt_setprop_cells(vms->fdt, nodename, "iommu-map", 0x0, vms->iommu_phandle, 0x0, 0x10000); @@ -XXX,XX +XXX,XX @@ static void create_pcie(VirtMachineState *vms, qemu_irq *pic) g_free(nodename); } -static void create_platform_bus(VirtMachineState *vms, qemu_irq *pic) +static void create_platform_bus(VirtMachineState *vms) { DeviceState *dev; SysBusDevice *s; @@ -XXX,XX +XXX,XX @@ static void create_platform_bus(VirtMachineState *vms, qemu_irq *pic) s = SYS_BUS_DEVICE(dev); for (i = 0; i < PLATFORM_BUS_NUM_IRQS; i++) { - int irqn = vms->irqmap[VIRT_PLATFORM_BUS] + i; - sysbus_connect_irq(s, i, pic[irqn]); + int irq = vms->irqmap[VIRT_PLATFORM_BUS] + i; + sysbus_connect_irq(s, i, qdev_get_gpio_in(vms->gic, irq)); } memory_region_add_subregion(sysmem, @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(machine); MachineClass *mc = MACHINE_GET_CLASS(machine); const CPUArchIdList *possible_cpus; - qemu_irq pic[NUM_IRQS]; MemoryRegion *sysmem = get_system_memory(); MemoryRegion *secure_sysmem = NULL; int n, virt_max_cpus; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem); - create_gic(vms, pic); + create_gic(vms); fdt_add_pmu_nodes(vms); - create_uart(vms, pic, VIRT_UART, sysmem, serial_hd(0)); + create_uart(vms, VIRT_UART, sysmem, serial_hd(0)); if (vms->secure) { create_secure_ram(vms, secure_sysmem); - create_uart(vms, pic, VIRT_SECURE_UART, secure_sysmem, serial_hd(1)); + create_uart(vms, VIRT_SECURE_UART, secure_sysmem, serial_hd(1)); } vms->highmem_ecam &= vms->highmem && (!firmware_loaded || aarch64); - create_rtc(vms, pic); + create_rtc(vms); - create_pcie(vms, pic); + create_pcie(vms); if (has_ged && aarch64 && firmware_loaded && acpi_enabled) { - vms->acpi_dev = create_acpi_ged(vms, pic); + vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms, pic); + create_gpio(vms); } /* connect powerdown request */ @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) * (which will be automatically plugged in to the transports). If * no backend is created the transport will just sit harmlessly idle. */ - create_virtio_devices(vms, pic); + create_virtio_devices(vms); vms->fw_cfg = create_fw_cfg(vms, &address_space_memory); rom_set_fw(vms->fw_cfg); - create_platform_bus(vms, pic); + create_platform_bus(vms); vms->bootinfo.ram_size = machine->ram_size; vms->bootinfo.nb_cpus = smp_cpus; -- 2.20.1 From: Alex Bennée <alex.bennee@linaro.org> A write to the SCR can change the effective EL by droppping the system from secure to non-secure mode. However if we use a cached current_el from before the change we'll rebuild the flags incorrectly. To fix this we introduce the ARM_CP_NEWEL CP flag to indicate the new EL should be used when recomputing the flags. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191212114734.6962-1-alex.bennee@linaro.org Cc: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20191209143723.6368-1-alex.bennee@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 8 ++++++-- target/arm/helper.h | 1 + target/arm/helper.c | 14 +++++++++++++- target/arm/translate.c | 6 +++++- 4 files changed, 25 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) * RAISES_EXC is for when the read or write hook might raise an exception; * the generated code will synchronize the CPU state before calling the hook * so that it is safe for the hook to call raise_exception(). + * NEWEL is for writes to registers that might change the exception + * level - typically on older ARM chips. For those cases we need to + * re-read the new el when recomputing the translation flags. */ #define ARM_CP_SPECIAL 0x0001 #define ARM_CP_CONST 0x0002 @@ -XXX,XX +XXX,XX @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) #define ARM_CP_SVE 0x2000 #define ARM_CP_NO_GDB 0x4000 #define ARM_CP_RAISES_EXC 0x8000 +#define ARM_CP_NEWEL 0x10000 /* Used only as a terminator for ARMCPRegInfo lists */ -#define ARM_CP_SENTINEL 0xffff +#define ARM_CP_SENTINEL 0xfffff /* Mask of only the flag bits in a type field */ -#define ARM_CP_FLAG_MASK 0xf0ff +#define ARM_CP_FLAG_MASK 0x1f0ff /* Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(get_user_reg, i32, env, i32) DEF_HELPER_3(set_user_reg, void, env, i32, i32) DEF_HELPER_FLAGS_2(rebuild_hflags_m32, TCG_CALL_NO_RWG, void, env, int) +DEF_HELPER_FLAGS_1(rebuild_hflags_a32_newel, TCG_CALL_NO_RWG, void, env) DEF_HELPER_FLAGS_2(rebuild_hflags_a32, TCG_CALL_NO_RWG, void, env, int) DEF_HELPER_FLAGS_2(rebuild_hflags_a64, TCG_CALL_NO_RWG, void, env, int) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_cp_reginfo[] = { .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0, .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3), .resetvalue = 0, .writefn = scr_write }, - { .name = "SCR", .type = ARM_CP_ALIAS, + { .name = "SCR", .type = ARM_CP_ALIAS | ARM_CP_NEWEL, .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0, .access = PL1_RW, .accessfn = access_trap_aa32s_el1, .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3), @@ -XXX,XX +XXX,XX @@ void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); } +/* + * If we have triggered a EL state change we can't rely on the + * translator having passed it too us, we need to recompute. + */ +void HELPER(rebuild_hflags_a32_newel)(CPUARMState *env) +{ + int el = arm_current_el(env); + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx); +} + void HELPER(rebuild_hflags_a32)(CPUARMState *env, int el) { int fp_el = fp_exception_el(env, el); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { gen_helper_rebuild_hflags_m32(cpu_env, tcg_el); } else { - gen_helper_rebuild_hflags_a32(cpu_env, tcg_el); + if (ri->type & ARM_CP_NEWEL) { + gen_helper_rebuild_hflags_a32_newel(cpu_env); + } else { + gen_helper_rebuild_hflags_a32(cpu_env, tcg_el); + } } tcg_temp_free_i32(tcg_el); /* -- 2.20.1 Last minute pullreq for arm related patches; quite large because there were several series that only just made it through code review in time. thanks -- PMM The following changes since commit 091e3e3dbc499d84c004e1c50bc9870af37f6e99: Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-10-26' into staging (2020-10-26 22:36:35 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201027-1 for you to fetch changes up to 32bd322a0134ed89db00f2b9b3894982db3dedcb: hw/timer/armv7m_systick: Rewrite to use ptimers (2020-10-27 11:15:31 +0000) ---------------------------------------------------------------- target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer ---------------------------------------------------------------- Dr. David Alan Gilbert (1): arm/trace: Fix hex printing Hao Wu (1): hw/timer: Adding watchdog for NPCM7XX Timer. Havard Skinnemoen (4): Move npcm7xx_timer_reached_zero call out of npcm7xx_timer_pause hw/misc: Add npcm7xx random number generator hw/arm/npcm7xx: Add EHCI and OHCI controllers hw/gpio: Add GPIO model for Nuvoton NPCM7xx Luc Michel (14): hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro hw/core/clock: trace clock values in Hz instead of ns hw/arm/raspi: fix CPRMAN base address hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: add sane reset values to the registers hw/char/pl011: add a clock input hw/arm/bcm2835_peripherals: connect the UART clock Pavel Dovgalyuk (1): hw/arm: fix min_cpus for xlnx-versal-virt platform Peter Maydell (2): hw/core/ptimer: Support ptimer being disabled by timer callback hw/timer/armv7m_systick: Rewrite to use ptimers Philippe Mathieu-Daudé (10): linux-user/elfload: Avoid leaking interp_name using GLib memory API hw/arm/bcm2836: Restrict BCM283XInfo declaration to C source hw/arm/bcm2836: QOM'ify more by adding class_init() to each SoC type hw/arm/bcm2836: Introduce BCM283XClass::core_count hw/arm/bcm2836: Only provide "enabled-cpus" property to multicore SoCs hw/arm/bcm2836: Split out common realize() code hw/arm/bcm2836: Introduce the BCM2835 SoC hw/arm/raspi: Add the Raspberry Pi A+ machine hw/arm/raspi: Add the Raspberry Pi Zero machine hw/arm/raspi: Add the Raspberry Pi 3 model A+ Richard Henderson (11): linux-user/aarch64: Reset btype for signals linux-user: Set PAGE_TARGET_1 for TARGET_PROT_BTI include/elf: Add defines related to GNU property notes for AArch64 linux-user/elfload: Fix coding style in load_elf_image linux-user/elfload: Adjust iteration over phdr linux-user/elfload: Move PT_INTERP detection to first loop linux-user/elfload: Use Error for load_elf_image linux-user/elfload: Use Error for load_elf_interp linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes linux-user/elfload: Parse GNU_PROPERTY_AARCH64_FEATURE_1_AND tests/tcg/aarch64: Add bti smoke tests Shashi Mallela (2): hw/watchdog: Implement SBSA watchdog device hw/arm/sbsa-ref: add SBSA watchdog device Thomas Huth (1): hw/arm/highbank: Silence warnings about missing fallthrough statements Zenghui Yu (1): hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly docs/system/arm/nuvoton.rst | 6 +- hw/usb/hcd-ehci.h | 1 + include/elf.h | 22 + include/exec/cpu-all.h | 2 + include/hw/arm/bcm2835_peripherals.h | 5 +- include/hw/arm/bcm2836.h | 9 +- include/hw/arm/npcm7xx.h | 8 + include/hw/arm/raspi_platform.h | 5 +- include/hw/char/pl011.h | 1 + include/hw/clock.h | 5 + include/hw/gpio/npcm7xx_gpio.h | 55 ++ include/hw/misc/bcm2835_cprman.h | 210 ++++++ include/hw/misc/bcm2835_cprman_internals.h | 1019 ++++++++++++++++++++++++++++ include/hw/misc/npcm7xx_clk.h | 2 + include/hw/misc/npcm7xx_rng.h | 34 + include/hw/timer/armv7m_systick.h | 3 +- include/hw/timer/npcm7xx_timer.h | 48 +- include/hw/watchdog/sbsa_gwdt.h | 79 +++ linux-user/qemu.h | 4 + linux-user/syscall_defs.h | 4 + target/arm/cpu.h | 5 + hw/arm/bcm2835_peripherals.c | 15 +- hw/arm/bcm2836.c | 182 +++-- hw/arm/highbank.c | 2 + hw/arm/npcm7xx.c | 126 +++- hw/arm/raspi.c | 41 ++ hw/arm/sbsa-ref.c | 23 + hw/arm/smmuv3.c | 1 + hw/arm/xlnx-versal-virt.c | 1 + hw/char/pl011.c | 45 ++ hw/core/clock.c | 6 +- hw/core/ptimer.c | 4 + hw/gpio/npcm7xx_gpio.c | 424 ++++++++++++ hw/misc/bcm2835_cprman.c | 808 ++++++++++++++++++++++ hw/misc/npcm7xx_clk.c | 28 + hw/misc/npcm7xx_rng.c | 180 +++++ hw/timer/armv7m_systick.c | 124 ++-- hw/timer/npcm7xx_timer.c | 270 ++++++-- hw/usb/hcd-ehci-sysbus.c | 19 + hw/watchdog/sbsa_gwdt.c | 293 ++++++++ linux-user/aarch64/signal.c | 10 +- linux-user/elfload.c | 326 +++++++-- linux-user/mmap.c | 16 + target/arm/translate-a64.c | 6 +- tests/qtest/npcm7xx_gpio-test.c | 385 +++++++++++ tests/qtest/npcm7xx_rng-test.c | 278 ++++++++ tests/qtest/npcm7xx_watchdog_timer-test.c | 319 +++++++++ tests/tcg/aarch64/bti-1.c | 62 ++ tests/tcg/aarch64/bti-2.c | 116 ++++ tests/tcg/aarch64/bti-crt.inc.c | 51 ++ MAINTAINERS | 1 + hw/arm/Kconfig | 1 + hw/arm/trace-events | 2 +- hw/char/trace-events | 1 + hw/core/trace-events | 4 +- hw/gpio/meson.build | 1 + hw/gpio/trace-events | 7 + hw/misc/meson.build | 2 + hw/misc/trace-events | 9 + hw/watchdog/Kconfig | 3 + hw/watchdog/meson.build | 1 + tests/qtest/meson.build | 6 +- tests/tcg/aarch64/Makefile.target | 10 + tests/tcg/configure.sh | 4 + 64 files changed, 5461 insertions(+), 279 deletions(-) create mode 100644 include/hw/gpio/npcm7xx_gpio.h create mode 100644 include/hw/misc/bcm2835_cprman.h create mode 100644 include/hw/misc/bcm2835_cprman_internals.h create mode 100644 include/hw/misc/npcm7xx_rng.h create mode 100644 include/hw/watchdog/sbsa_gwdt.h create mode 100644 hw/gpio/npcm7xx_gpio.c create mode 100644 hw/misc/bcm2835_cprman.c create mode 100644 hw/misc/npcm7xx_rng.c create mode 100644 hw/watchdog/sbsa_gwdt.c create mode 100644 tests/qtest/npcm7xx_gpio-test.c create mode 100644 tests/qtest/npcm7xx_rng-test.c create mode 100644 tests/qtest/npcm7xx_watchdog_timer-test.c create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-2.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c From: Richard Henderson <richard.henderson@linaro.org> The kernel sets btype for the signal handler as if for a call. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, + offsetof(struct target_rt_frame_record, tramp); } env->xregs[0] = usig; - env->xregs[31] = frame_addr; env->xregs[29] = frame_addr + fr_ofs; - env->pc = ka->_sa_handler; env->xregs[30] = return_addr; + env->xregs[31] = frame_addr; + env->pc = ka->_sa_handler; + + /* Invoke the signal handler as if by indirect call. */ + if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { + env->btype = 2; + } + if (info) { tswap_siginfo(&frame->info, info); env->xregs[1] = frame_addr + offsetof(struct target_rt_sigframe, info); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Transform the prot bit to a qemu internal page bit, and save it in the page tables. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 2 ++ linux-user/syscall_defs.h | 4 ++++ target/arm/cpu.h | 5 +++++ linux-user/mmap.c | 16 ++++++++++++++++ target/arm/translate-a64.c | 6 +++--- 5 files changed, 30 insertions(+), 3 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask; /* FIXME: Code that sets/uses this is broken and needs to go away. */ #define PAGE_RESERVED 0x0020 #endif +/* Target-specific bits that will be used via page_get_flags(). */ +#define PAGE_TARGET_1 0x0080 #if defined(CONFIG_USER_ONLY) void page_dump(FILE *f); diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall_defs.h +++ b/linux-user/syscall_defs.h @@ -XXX,XX +XXX,XX @@ struct target_winsize { #define TARGET_PROT_SEM 0x08 #endif +#ifdef TARGET_AARCH64 +#define TARGET_PROT_BTI 0x10 +#endif + /* Common */ #define TARGET_MAP_SHARED 0x01 /* Share changes */ #define TARGET_MAP_PRIVATE 0x02 /* Changes are private */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) #define arm_tlb_bti_gp(x) (typecheck_memtxattrs(x)->target_tlb_bit0) #define arm_tlb_mte_tagged(x) (typecheck_memtxattrs(x)->target_tlb_bit1) +/* + * AArch64 usage of the PAGE_TARGET_* bits for linux-user. + */ +#define PAGE_BTI PAGE_TARGET_1 + /* * Naming convention for isar_feature functions: * Functions which test 32-bit ID registers should have _aa32_ in diff --git a/linux-user/mmap.c b/linux-user/mmap.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -XXX,XX +XXX,XX @@ static int validate_prot_to_pageflags(int *host_prot, int prot) *host_prot = (prot & (PROT_READ | PROT_WRITE)) | (prot & PROT_EXEC ? PROT_READ : 0); +#ifdef TARGET_AARCH64 + /* + * The PROT_BTI bit is only accepted if the cpu supports the feature. + * Since this is the unusual case, don't bother checking unless + * the bit has been requested. If set and valid, record the bit + * within QEMU's page_flags. + */ + if (prot & TARGET_PROT_BTI) { + ARMCPU *cpu = ARM_CPU(thread_cpu); + if (cpu_isar_feature(aa64_bti, cpu)) { + valid |= TARGET_PROT_BTI; + page_flags |= PAGE_BTI; + } + } +#endif + return prot & ~valid ? 0 : page_flags; } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_simd_fp(DisasContext *s, uint32_t insn) */ static bool is_guarded_page(CPUARMState *env, DisasContext *s) { -#ifdef CONFIG_USER_ONLY - return false; /* FIXME */ -#else uint64_t addr = s->base.pc_first; +#ifdef CONFIG_USER_ONLY + return page_get_flags(addr) & PAGE_BTI; +#else int mmu_idx = arm_to_core_mmu_idx(s->mmu_idx); unsigned int index = tlb_index(env, mmu_idx, addr); CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These are all of the defines required to parse GNU_PROPERTY_AARCH64_FEATURE_1_AND, copied from binutils. Other missing defines related to other GNU program headers and notes are elided for now. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/elf.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/include/elf.h b/include/elf.h index XXXXXXX..XXXXXXX 100644 --- a/include/elf.h +++ b/include/elf.h @@ -XXX,XX +XXX,XX @@ typedef int64_t Elf64_Sxword; #define PT_NOTE 4 #define PT_SHLIB 5 #define PT_PHDR 6 +#define PT_LOOS 0x60000000 +#define PT_HIOS 0x6fffffff #define PT_LOPROC 0x70000000 #define PT_HIPROC 0x7fffffff +#define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) + #define PT_MIPS_REGINFO 0x70000000 #define PT_MIPS_RTPROC 0x70000001 #define PT_MIPS_OPTIONS 0x70000002 @@ -XXX,XX +XXX,XX @@ typedef struct elf64_shdr { #define NT_ARM_SYSTEM_CALL 0x404 /* ARM system call number */ #define NT_ARM_SVE 0x405 /* ARM Scalable Vector Extension regs */ +/* Defined note types for GNU systems. */ + +#define NT_GNU_PROPERTY_TYPE_0 5 /* Program property */ + +/* Values used in GNU .note.gnu.property notes (NT_GNU_PROPERTY_TYPE_0). */ + +#define GNU_PROPERTY_STACK_SIZE 1 +#define GNU_PROPERTY_NO_COPY_ON_PROTECTED 2 + +#define GNU_PROPERTY_LOPROC 0xc0000000 +#define GNU_PROPERTY_HIPROC 0xdfffffff +#define GNU_PROPERTY_LOUSER 0xe0000000 +#define GNU_PROPERTY_HIUSER 0xffffffff + +#define GNU_PROPERTY_AARCH64_FEATURE_1_AND 0xc0000000 +#define GNU_PROPERTY_AARCH64_FEATURE_1_BTI (1u << 0) +#define GNU_PROPERTY_AARCH64_FEATURE_1_PAC (1u << 1) + /* * Physical entry point into the kernel. * -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Fix an unlikely memory leak in load_elf_image(). Fixes: bf858897b7 ("linux-user: Re-use load_elf_image for the main binary.") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-5-richard.henderson@linaro.org Message-Id: <20201003174944.1972444-1-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, info->brk = vaddr_em; } } else if (eppnt->p_type == PT_INTERP && pinterp_name) { - char *interp_name; + g_autofree char *interp_name = NULL; if (*pinterp_name) { errmsg = "Multiple PT_INTERP entries"; goto exit_errmsg; } - interp_name = malloc(eppnt->p_filesz); + interp_name = g_malloc(eppnt->p_filesz); if (!interp_name) { goto exit_perror; } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, errmsg = "Invalid PT_INTERP entry"; goto exit_errmsg; } - *pinterp_name = interp_name; + *pinterp_name = g_steal_pointer(&interp_name); #ifdef TARGET_MIPS } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; @@ -XXX,XX +XXX,XX @@ int load_elf_binary(struct linux_binprm *bprm, struct image_info *info) if (elf_interpreter) { info->load_bias = interp_info.load_bias; info->entry = interp_info.entry; - free(elf_interpreter); + g_free(elf_interpreter); } #ifdef USE_ELF_CORE_DUMP -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Fixing this now will clarify following patches. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-6-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, abi_ulong vaddr, vaddr_po, vaddr_ps, vaddr_ef, vaddr_em, vaddr_len; int elf_prot = 0; - if (eppnt->p_flags & PF_R) elf_prot = PROT_READ; - if (eppnt->p_flags & PF_W) elf_prot |= PROT_WRITE; - if (eppnt->p_flags & PF_X) elf_prot |= PROT_EXEC; + if (eppnt->p_flags & PF_R) { + elf_prot |= PROT_READ; + } + if (eppnt->p_flags & PF_W) { + elf_prot |= PROT_WRITE; + } + if (eppnt->p_flags & PF_X) { + elf_prot |= PROT_EXEC; + } vaddr = load_bias + eppnt->p_vaddr; vaddr_po = TARGET_ELF_PAGEOFFSET(vaddr); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The second loop uses a loop induction variable, and the first does not. Transform the first to match the second, to simplify a following patch moving code between them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-7-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, loaddr = -1, hiaddr = 0; info->alignment = 0; for (i = 0; i < ehdr->e_phnum; ++i) { - if (phdr[i].p_type == PT_LOAD) { - abi_ulong a = phdr[i].p_vaddr - phdr[i].p_offset; + struct elf_phdr *eppnt = phdr + i; + if (eppnt->p_type == PT_LOAD) { + abi_ulong a = eppnt->p_vaddr - eppnt->p_offset; if (a < loaddr) { loaddr = a; } - a = phdr[i].p_vaddr + phdr[i].p_memsz; + a = eppnt->p_vaddr + eppnt->p_memsz; if (a > hiaddr) { hiaddr = a; } ++info->nsegs; - info->alignment |= phdr[i].p_align; + info->alignment |= eppnt->p_align; } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> For BTI, we need to know if the executable is static or dynamic, which means looking for PT_INTERP earlier. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 60 +++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 29 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, mmap_lock(); - /* Find the maximum size of the image and allocate an appropriate - amount of memory to handle that. */ + /* + * Find the maximum size of the image and allocate an appropriate + * amount of memory to handle that. Locate the interpreter, if any. + */ loaddr = -1, hiaddr = 0; info->alignment = 0; for (i = 0; i < ehdr->e_phnum; ++i) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, } ++info->nsegs; info->alignment |= eppnt->p_align; + } else if (eppnt->p_type == PT_INTERP && pinterp_name) { + g_autofree char *interp_name = NULL; + + if (*pinterp_name) { + errmsg = "Multiple PT_INTERP entries"; + goto exit_errmsg; + } + interp_name = g_malloc(eppnt->p_filesz); + if (!interp_name) { + goto exit_perror; + } + + if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { + memcpy(interp_name, bprm_buf + eppnt->p_offset, + eppnt->p_filesz); + } else { + retval = pread(image_fd, interp_name, eppnt->p_filesz, + eppnt->p_offset); + if (retval != eppnt->p_filesz) { + goto exit_perror; + } + } + if (interp_name[eppnt->p_filesz - 1] != 0) { + errmsg = "Invalid PT_INTERP entry"; + goto exit_errmsg; + } + *pinterp_name = g_steal_pointer(&interp_name); } } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, if (vaddr_em > info->brk) { info->brk = vaddr_em; } - } else if (eppnt->p_type == PT_INTERP && pinterp_name) { - g_autofree char *interp_name = NULL; - - if (*pinterp_name) { - errmsg = "Multiple PT_INTERP entries"; - goto exit_errmsg; - } - interp_name = g_malloc(eppnt->p_filesz); - if (!interp_name) { - goto exit_perror; - } - - if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { - memcpy(interp_name, bprm_buf + eppnt->p_offset, - eppnt->p_filesz); - } else { - retval = pread(image_fd, interp_name, eppnt->p_filesz, - eppnt->p_offset); - if (retval != eppnt->p_filesz) { - goto exit_perror; - } - } - if (interp_name[eppnt->p_filesz - 1] != 0) { - errmsg = "Invalid PT_INTERP entry"; - goto exit_errmsg; - } - *pinterp_name = g_steal_pointer(&interp_name); #ifdef TARGET_MIPS } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is a bit clearer than open-coding some of this with a bare c string. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-9-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ #include "qemu/guest-random.h" #include "qemu/units.h" #include "qemu/selfmap.h" +#include "qapi/error.h" #ifdef _ARCH_PPC64 #undef ARCH_DLINFO @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, struct elf_phdr *phdr; abi_ulong load_addr, load_bias, loaddr, hiaddr, error; int i, retval; - const char *errmsg; + Error *err = NULL; /* First of all, some simple consistency checks */ - errmsg = "Invalid ELF image for this architecture"; if (!elf_check_ident(ehdr)) { + error_setg(&err, "Invalid ELF image for this architecture"); goto exit_errmsg; } bswap_ehdr(ehdr); if (!elf_check_ehdr(ehdr)) { + error_setg(&err, "Invalid ELF image for this architecture"); goto exit_errmsg; } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, g_autofree char *interp_name = NULL; if (*pinterp_name) { - errmsg = "Multiple PT_INTERP entries"; + error_setg(&err, "Multiple PT_INTERP entries"); goto exit_errmsg; } + interp_name = g_malloc(eppnt->p_filesz); - if (!interp_name) { - goto exit_perror; - } if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { memcpy(interp_name, bprm_buf + eppnt->p_offset, @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, retval = pread(image_fd, interp_name, eppnt->p_filesz, eppnt->p_offset); if (retval != eppnt->p_filesz) { - goto exit_perror; + goto exit_read; } } if (interp_name[eppnt->p_filesz - 1] != 0) { - errmsg = "Invalid PT_INTERP entry"; + error_setg(&err, "Invalid PT_INTERP entry"); goto exit_errmsg; } *pinterp_name = g_steal_pointer(&interp_name); @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, (ehdr->e_type == ET_EXEC ? MAP_FIXED : 0), -1, 0); if (load_addr == -1) { - goto exit_perror; + goto exit_mmap; } load_bias = load_addr - loaddr; @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, image_fd, eppnt->p_offset - vaddr_po); if (error == -1) { - goto exit_perror; + goto exit_mmap; } } @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) { Mips_elf_abiflags_v0 abiflags; if (eppnt->p_filesz < sizeof(Mips_elf_abiflags_v0)) { - errmsg = "Invalid PT_MIPS_ABIFLAGS entry"; + error_setg(&err, "Invalid PT_MIPS_ABIFLAGS entry"); goto exit_errmsg; } if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, retval = pread(image_fd, &abiflags, sizeof(Mips_elf_abiflags_v0), eppnt->p_offset); if (retval != sizeof(Mips_elf_abiflags_v0)) { - goto exit_perror; + goto exit_read; } } bswap_mips_abiflags(&abiflags); @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, exit_read: if (retval >= 0) { - errmsg = "Incomplete read of file header"; - goto exit_errmsg; + error_setg(&err, "Incomplete read of file header"); + } else { + error_setg_errno(&err, errno, "Error reading file header"); } - exit_perror: - errmsg = strerror(errno); + goto exit_errmsg; + exit_mmap: + error_setg_errno(&err, errno, "Error mapping file"); + goto exit_errmsg; exit_errmsg: - fprintf(stderr, "%s: %s\n", image_name, errmsg); + error_reportf_err(err, "%s: ", image_name); exit(-1); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is slightly clearer than just using strerror, though the different forms produced by error_setg_file_open and error_setg_errno isn't entirely convenient. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-10-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void load_elf_interp(const char *filename, struct image_info *info, char bprm_buf[BPRM_BUF_SIZE]) { int fd, retval; + Error *err = NULL; fd = open(path(filename), O_RDONLY); if (fd < 0) { - goto exit_perror; + error_setg_file_open(&err, errno, filename); + error_report_err(err); + exit(-1); } retval = read(fd, bprm_buf, BPRM_BUF_SIZE); if (retval < 0) { - goto exit_perror; + error_setg_errno(&err, errno, "Error reading file header"); + error_reportf_err(err, "%s: ", filename); + exit(-1); } + if (retval < BPRM_BUF_SIZE) { memset(bprm_buf + retval, 0, BPRM_BUF_SIZE - retval); } load_elf_image(filename, fd, info, NULL, bprm_buf); - return; - - exit_perror: - fprintf(stderr, "%s: %s\n", filename, strerror(errno)); - exit(-1); } static int symfind(const void *s0, const void *s1) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is generic support, with the code disabled for all targets. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-11-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/qemu.h | 4 ++ linux-user/elfload.c | 157 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 161 insertions(+) diff --git a/linux-user/qemu.h b/linux-user/qemu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -XXX,XX +XXX,XX @@ struct image_info { abi_ulong interpreter_loadmap_addr; abi_ulong interpreter_pt_dynamic_addr; struct image_info *other_info; + + /* For target-specific processing of NT_GNU_PROPERTY_TYPE_0. */ + uint32_t note_flags; + #ifdef TARGET_MIPS int fp_abi; int interp_fp_abi; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void elf_core_copy_regs(target_elf_gregset_t *regs, #include "elf.h" +static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, + const uint32_t *data, + struct image_info *info, + Error **errp) +{ + g_assert_not_reached(); +} +#define ARCH_USE_GNU_PROPERTY 0 + struct exec { unsigned int a_info; /* Use macros N_MAGIC, etc for access */ @@ -XXX,XX +XXX,XX @@ void probe_guest_base(const char *image_name, abi_ulong guest_loaddr, "@ 0x%" PRIx64 "\n", (uint64_t)guest_base); } +enum { + /* The string "GNU\0" as a magic number. */ + GNU0_MAGIC = const_le32('G' | 'N' << 8 | 'U' << 16), + NOTE_DATA_SZ = 1 * KiB, + NOTE_NAME_SZ = 4, + ELF_GNU_PROPERTY_ALIGN = ELF_CLASS == ELFCLASS32 ? 4 : 8, +}; + +/* + * Process a single gnu_property entry. + * Return false for error. + */ +static bool parse_elf_property(const uint32_t *data, int *off, int datasz, + struct image_info *info, bool have_prev_type, + uint32_t *prev_type, Error **errp) +{ + uint32_t pr_type, pr_datasz, step; + + if (*off > datasz || !QEMU_IS_ALIGNED(*off, ELF_GNU_PROPERTY_ALIGN)) { + goto error_data; + } + datasz -= *off; + data += *off / sizeof(uint32_t); + + if (datasz < 2 * sizeof(uint32_t)) { + goto error_data; + } + pr_type = data[0]; + pr_datasz = data[1]; + data += 2; + datasz -= 2 * sizeof(uint32_t); + step = ROUND_UP(pr_datasz, ELF_GNU_PROPERTY_ALIGN); + if (step > datasz) { + goto error_data; + } + + /* Properties are supposed to be unique and sorted on pr_type. */ + if (have_prev_type && pr_type <= *prev_type) { + if (pr_type == *prev_type) { + error_setg(errp, "Duplicate property in PT_GNU_PROPERTY"); + } else { + error_setg(errp, "Unsorted property in PT_GNU_PROPERTY"); + } + return false; + } + *prev_type = pr_type; + + if (!arch_parse_elf_property(pr_type, pr_datasz, data, info, errp)) { + return false; + } + + *off += 2 * sizeof(uint32_t) + step; + return true; + + error_data: + error_setg(errp, "Ill-formed property in PT_GNU_PROPERTY"); + return false; +} + +/* Process NT_GNU_PROPERTY_TYPE_0. */ +static bool parse_elf_properties(int image_fd, + struct image_info *info, + const struct elf_phdr *phdr, + char bprm_buf[BPRM_BUF_SIZE], + Error **errp) +{ + union { + struct elf_note nhdr; + uint32_t data[NOTE_DATA_SZ / sizeof(uint32_t)]; + } note; + + int n, off, datasz; + bool have_prev_type; + uint32_t prev_type; + + /* Unless the arch requires properties, ignore them. */ + if (!ARCH_USE_GNU_PROPERTY) { + return true; + } + + /* If the properties are crazy large, that's too bad. */ + n = phdr->p_filesz; + if (n > sizeof(note)) { + error_setg(errp, "PT_GNU_PROPERTY too large"); + return false; + } + if (n < sizeof(note.nhdr)) { + error_setg(errp, "PT_GNU_PROPERTY too small"); + return false; + } + + if (phdr->p_offset + n <= BPRM_BUF_SIZE) { + memcpy(&note, bprm_buf + phdr->p_offset, n); + } else { + ssize_t len = pread(image_fd, &note, n, phdr->p_offset); + if (len != n) { + error_setg_errno(errp, errno, "Error reading file header"); + return false; + } + } + + /* + * The contents of a valid PT_GNU_PROPERTY is a sequence + * of uint32_t -- swap them all now. + */ +#ifdef BSWAP_NEEDED + for (int i = 0; i < n / 4; i++) { + bswap32s(note.data + i); + } +#endif + + /* + * Note that nhdr is 3 words, and that the "name" described by namesz + * immediately follows nhdr and is thus at the 4th word. Further, all + * of the inputs to the kernel's round_up are multiples of 4. + */ + if (note.nhdr.n_type != NT_GNU_PROPERTY_TYPE_0 || + note.nhdr.n_namesz != NOTE_NAME_SZ || + note.data[3] != GNU0_MAGIC) { + error_setg(errp, "Invalid note in PT_GNU_PROPERTY"); + return false; + } + off = sizeof(note.nhdr) + NOTE_NAME_SZ; + + datasz = note.nhdr.n_descsz + off; + if (datasz > n) { + error_setg(errp, "Invalid note size in PT_GNU_PROPERTY"); + return false; + } + + have_prev_type = false; + prev_type = 0; + while (1) { + if (off == datasz) { + return true; /* end, exit ok */ + } + if (!parse_elf_property(note.data, &off, datasz, info, + have_prev_type, &prev_type, errp)) { + return false; + } + have_prev_type = true; + } +} + /* Load an ELF image into the address space. IMAGE_NAME is the filename of the image, to use in error messages. @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, goto exit_errmsg; } *pinterp_name = g_steal_pointer(&interp_name); + } else if (eppnt->p_type == PT_GNU_PROPERTY) { + if (!parse_elf_properties(image_fd, info, eppnt, bprm_buf, &err)) { + goto exit_errmsg; + } } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use the new generic support for NT_GNU_PROPERTY_TYPE_0. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 48 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static void elf_core_copy_regs(target_elf_gregset_t *regs, #include "elf.h" +/* We must delay the following stanzas until after "elf.h". */ +#if defined(TARGET_AARCH64) + +static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, + const uint32_t *data, + struct image_info *info, + Error **errp) +{ + if (pr_type == GNU_PROPERTY_AARCH64_FEATURE_1_AND) { + if (pr_datasz != sizeof(uint32_t)) { + error_setg(errp, "Ill-formed GNU_PROPERTY_AARCH64_FEATURE_1_AND"); + return false; + } + /* We will extract GNU_PROPERTY_AARCH64_FEATURE_1_BTI later. */ + info->note_flags = *data; + } + return true; +} +#define ARCH_USE_GNU_PROPERTY 1 + +#else + static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, const uint32_t *data, struct image_info *info, @@ -XXX,XX +XXX,XX @@ static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz, } #define ARCH_USE_GNU_PROPERTY 0 +#endif + struct exec { unsigned int a_info; /* Use macros N_MAGIC, etc for access */ @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, struct elfhdr *ehdr = (struct elfhdr *)bprm_buf; struct elf_phdr *phdr; abi_ulong load_addr, load_bias, loaddr, hiaddr, error; - int i, retval; + int i, retval, prot_exec; Error *err = NULL; /* First of all, some simple consistency checks */ @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, info->brk = 0; info->elf_flags = ehdr->e_flags; + prot_exec = PROT_EXEC; +#ifdef TARGET_AARCH64 + /* + * If the BTI feature is present, this indicates that the executable + * pages of the startup binary should be mapped with PROT_BTI, so that + * branch targets are enforced. + * + * The startup binary is either the interpreter or the static executable. + * The interpreter is responsible for all pages of a dynamic executable. + * + * Elf notes are backward compatible to older cpus. + * Do not enable BTI unless it is supported. + */ + if ((info->note_flags & GNU_PROPERTY_AARCH64_FEATURE_1_BTI) + && (pinterp_name == NULL || *pinterp_name == 0) + && cpu_isar_feature(aa64_bti, ARM_CPU(thread_cpu))) { + prot_exec |= TARGET_PROT_BTI; + } +#endif + for (i = 0; i < ehdr->e_phnum; i++) { struct elf_phdr *eppnt = phdr + i; if (eppnt->p_type == PT_LOAD) { @@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd, elf_prot |= PROT_WRITE; } if (eppnt->p_flags & PF_X) { - elf_prot |= PROT_EXEC; + elf_prot |= prot_exec; } vaddr = load_bias + eppnt->p_vaddr; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The note test requires gcc 10 for -mbranch-protection=standard. The mmap test uses PROT_BTI and does not require special compiler support. Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/bti-1.c | 62 ++++++++++++++++ tests/tcg/aarch64/bti-2.c | 116 ++++++++++++++++++++++++++++++ tests/tcg/aarch64/bti-crt.inc.c | 51 +++++++++++++ tests/tcg/aarch64/Makefile.target | 10 +++ tests/tcg/configure.sh | 4 ++ 5 files changed, 243 insertions(+) create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-2.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c diff --git a/tests/tcg/aarch64/bti-1.c b/tests/tcg/aarch64/bti-1.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-1.c @@ -XXX,XX +XXX,XX @@ +/* + * Branch target identification, basic notskip cases. + */ + +#include "bti-crt.inc.c" + +static void skip2_sigill(int sig, siginfo_t *info, ucontext_t *uc) +{ + uc->uc_mcontext.pc += 8; + uc->uc_mcontext.pstate = 1; +} + +#define NOP "nop" +#define BTI_N "hint #32" +#define BTI_C "hint #34" +#define BTI_J "hint #36" +#define BTI_JC "hint #38" + +#define BTYPE_1(DEST) \ + asm("mov %0,#1; adr x16, 1f; br x16; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x16") + +#define BTYPE_2(DEST) \ + asm("mov %0,#1; adr x16, 1f; blr x16; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x16", "x30") + +#define BTYPE_3(DEST) \ + asm("mov %0,#1; adr x15, 1f; br x15; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x15") + +#define TEST(WHICH, DEST, EXPECT) \ + do { WHICH(DEST); fail += skipped ^ EXPECT; } while (0) + + +int main() +{ + int fail = 0; + int skipped; + + /* Signal-like with SA_SIGINFO. */ + signal_info(SIGILL, skip2_sigill); + + TEST(BTYPE_1, NOP, 1); + TEST(BTYPE_1, BTI_N, 1); + TEST(BTYPE_1, BTI_C, 0); + TEST(BTYPE_1, BTI_J, 0); + TEST(BTYPE_1, BTI_JC, 0); + + TEST(BTYPE_2, NOP, 1); + TEST(BTYPE_2, BTI_N, 1); + TEST(BTYPE_2, BTI_C, 0); + TEST(BTYPE_2, BTI_J, 1); + TEST(BTYPE_2, BTI_JC, 0); + + TEST(BTYPE_3, NOP, 1); + TEST(BTYPE_3, BTI_N, 1); + TEST(BTYPE_3, BTI_C, 1); + TEST(BTYPE_3, BTI_J, 0); + TEST(BTYPE_3, BTI_JC, 0); + + return fail; +} diff --git a/tests/tcg/aarch64/bti-2.c b/tests/tcg/aarch64/bti-2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-2.c @@ -XXX,XX +XXX,XX @@ +/* + * Branch target identification, basic notskip cases. + */ + +#include <stdio.h> +#include <signal.h> +#include <string.h> +#include <unistd.h> +#include <sys/mman.h> + +#ifndef PROT_BTI +#define PROT_BTI 0x10 +#endif + +static void skip2_sigill(int sig, siginfo_t *info, void *vuc) +{ + ucontext_t *uc = vuc; + uc->uc_mcontext.pc += 8; + uc->uc_mcontext.pstate = 1; +} + +#define NOP "nop" +#define BTI_N "hint #32" +#define BTI_C "hint #34" +#define BTI_J "hint #36" +#define BTI_JC "hint #38" + +#define BTYPE_1(DEST) \ + "mov x1, #1\n\t" \ + "adr x16, 1f\n\t" \ + "br x16\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define BTYPE_2(DEST) \ + "mov x1, #1\n\t" \ + "adr x16, 1f\n\t" \ + "blr x16\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define BTYPE_3(DEST) \ + "mov x1, #1\n\t" \ + "adr x15, 1f\n\t" \ + "br x15\n" \ +"1: " DEST "\n\t" \ + "mov x1, #0" + +#define TEST(WHICH, DEST, EXPECT) \ + WHICH(DEST) "\n" \ + ".if " #EXPECT "\n\t" \ + "eor x1, x1," #EXPECT "\n" \ + ".endif\n\t" \ + "add x0, x0, x1\n\t" + +asm("\n" +"test_begin:\n\t" + BTI_C "\n\t" + "mov x2, x30\n\t" + "mov x0, #0\n\t" + + TEST(BTYPE_1, NOP, 1) + TEST(BTYPE_1, BTI_N, 1) + TEST(BTYPE_1, BTI_C, 0) + TEST(BTYPE_1, BTI_J, 0) + TEST(BTYPE_1, BTI_JC, 0) + + TEST(BTYPE_2, NOP, 1) + TEST(BTYPE_2, BTI_N, 1) + TEST(BTYPE_2, BTI_C, 0) + TEST(BTYPE_2, BTI_J, 1) + TEST(BTYPE_2, BTI_JC, 0) + + TEST(BTYPE_3, NOP, 1) + TEST(BTYPE_3, BTI_N, 1) + TEST(BTYPE_3, BTI_C, 1) + TEST(BTYPE_3, BTI_J, 0) + TEST(BTYPE_3, BTI_JC, 0) + + "ret x2\n" +"test_end:" +); + +int main() +{ + struct sigaction sa; + void *tb, *te; + + void *p = mmap(0, getpagesize(), + PROT_EXEC | PROT_READ | PROT_WRITE | PROT_BTI, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (p == MAP_FAILED) { + perror("mmap"); + return 1; + } + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = skip2_sigill; + sa.sa_flags = SA_SIGINFO; + if (sigaction(SIGILL, &sa, NULL) < 0) { + perror("sigaction"); + return 1; + } + + /* + * ??? With "extern char test_begin[]", some compiler versions + * will use :got references, and some linker versions will + * resolve this reference to a static symbol incorrectly. + * Bypass this error by using a pc-relative reference directly. + */ + asm("adr %0, test_begin; adr %1, test_end" : "=r"(tb), "=r"(te)); + + memcpy(p, tb, te - tb); + + return ((int (*)(void))p)(); +} diff --git a/tests/tcg/aarch64/bti-crt.inc.c b/tests/tcg/aarch64/bti-crt.inc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-crt.inc.c @@ -XXX,XX +XXX,XX @@ +/* + * Minimal user-environment for testing BTI. + * + * Normal libc is not (yet) built with BTI support enabled, + * and so could generate a BTI TRAP before ever reaching main. + */ + +#include <stdlib.h> +#include <signal.h> +#include <ucontext.h> +#include <asm/unistd.h> + +int main(void); + +void _start(void) +{ + exit(main()); +} + +void exit(int ret) +{ + register int x0 __asm__("x0") = ret; + register int x8 __asm__("x8") = __NR_exit; + + asm volatile("svc #0" : : "r"(x0), "r"(x8)); + __builtin_unreachable(); +} + +/* + * Irritatingly, the user API struct sigaction does not match the + * kernel API struct sigaction. So for simplicity, isolate the + * kernel ABI here, and make this act like signal. + */ +void signal_info(int sig, void (*fn)(int, siginfo_t *, ucontext_t *)) +{ + struct kernel_sigaction { + void (*handler)(int, siginfo_t *, ucontext_t *); + unsigned long flags; + unsigned long restorer; + unsigned long mask; + } sa = { fn, SA_SIGINFO, 0, 0 }; + + register int x0 __asm__("x0") = sig; + register void *x1 __asm__("x1") = &sa; + register void *x2 __asm__("x2") = 0; + register int x3 __asm__("x3") = sizeof(unsigned long); + register int x8 __asm__("x8") = __NR_rt_sigaction; + + asm volatile("svc #0" + : : "r"(x0), "r"(x1), "r"(x2), "r"(x3), "r"(x8) : "memory"); +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ run-pauth-%: QEMU_OPTS += -cpu max run-plugin-pauth-%: QEMU_OPTS += -cpu max endif +# BTI Tests +# bti-1 tests the elf notes, so we require special compiler support. +ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_BTI),) +AARCH64_TESTS += bti-1 +bti-1: CFLAGS += -mbranch-protection=standard +bti-1: LDFLAGS += -nostdlib +endif +# bti-2 tests PROT_BTI, so no special compiler support required. +AARCH64_TESTS += bti-2 + # Semihosting smoke test for linux-user AARCH64_TESTS += semihosting run-semihosting: semihosting diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh index XXXXXXX..XXXXXXX 100755 --- a/tests/tcg/configure.sh +++ b/tests/tcg/configure.sh @@ -XXX,XX +XXX,XX @@ for target in $target_list; do -march=armv8.3-a -o $TMPE $TMPC; then echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak fi + if do_compiler "$target_compiler" $target_compiler_cflags \ + -mbranch-protection=standard -o $TMPE $TMPC; then + echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak + fi ;; esac -- 2.20.1 From: Thomas Huth <thuth@redhat.com> When compiling with -Werror=implicit-fallthrough, gcc complains about missing fallthrough annotations in this file. Looking at the code, the fallthrough is very likely intended here, so add some comments to silence the compiler warnings. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 20201020105938.23209-1-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/highbank.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ static void hb_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x30, 0, MEMTXATTRS_UNSPECIFIED, NULL); + /* fallthrough */ case 3: address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x20, 0, MEMTXATTRS_UNSPECIFIED, NULL); + /* fallthrough */ case 2: address_space_stl_notdirty(&address_space_memory, SMP_BOOT_REG + 0x10, 0, -- 2.20.1 From: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> This patch sets min_cpus field for xlnx-versal-virt platform, because it always creates XLNX_VERSAL_NR_ACPUS cpus even with -smp 1 command line option. Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 160343854912.8460.17915238517799132371.stgit@pasha-ThinkPad-X280 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-versal-virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void versal_virt_machine_class_init(ObjectClass *oc, void *data) mc->desc = "Xilinx Versal Virtual development board"; mc->init = versal_virt_init; + mc->min_cpus = XLNX_VERSAL_NR_ACPUS; mc->max_cpus = XLNX_VERSAL_NR_ACPUS; mc->default_cpus = XLNX_VERSAL_NR_ACPUS; mc->no_cdrom = true; -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> This allows us to reuse npcm7xx_timer_pause for the watchdog timer. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/npcm7xx_timer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_pause(NPCM7xxTimer *t) timer_del(&t->qtimer); now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); t->remaining_ns = t->expires_ns - now; - if (t->remaining_ns <= 0) { - npcm7xx_timer_reached_zero(t); - } } /* @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) } else { t->tcsr &= ~NPCM7XX_TCSR_CACT; npcm7xx_timer_pause(t); + if (t->remaining_ns <= 0) { + npcm7xx_timer_reached_zero(t); + } } } } -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm7xx_clk.h | 2 + include/hw/timer/npcm7xx_timer.h | 48 +++- hw/arm/npcm7xx.c | 12 + hw/misc/npcm7xx_clk.c | 28 ++ hw/timer/npcm7xx_timer.c | 266 ++++++++++++++---- tests/qtest/npcm7xx_watchdog_timer-test.c | 319 ++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 2 +- 8 files changed, 624 insertions(+), 54 deletions(-) create mode 100644 tests/qtest/npcm7xx_watchdog_timer-test.c diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_CLK_NR_REGS (0x70 / sizeof(uint32_t)) +#define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in" + typedef struct NPCM7xxCLKState { SysBusDevice parent; diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/npcm7xx_timer.h +++ b/include/hw/timer/npcm7xx_timer.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_TIMER_NR_REGS (0x54 / sizeof(uint32_t)) +/* The basic watchdog timer period is 2^14 clock cycles. */ +#define NPCM7XX_WATCHDOG_BASETIME_SHIFT 14 + +#define NPCM7XX_WATCHDOG_RESET_GPIO_OUT "npcm7xx-clk-watchdog-reset-gpio-out" + typedef struct NPCM7xxTimerCtrlState NPCM7xxTimerCtrlState; /** - * struct NPCM7xxTimer - Individual timer state. - * @irq: GIC interrupt line to fire on expiration (if enabled). + * struct NPCM7xxBaseTimer - Basic functionality that both regular timer and + * watchdog timer use. * @qtimer: QEMU timer that notifies us on expiration. * @expires_ns: Absolute virtual expiration time. * @remaining_ns: Remaining time until expiration if timer is paused. + */ +typedef struct NPCM7xxBaseTimer { + QEMUTimer qtimer; + int64_t expires_ns; + int64_t remaining_ns; +} NPCM7xxBaseTimer; + +/** + * struct NPCM7xxTimer - Individual timer state. + * @ctrl: The timer module that owns this timer. + * @irq: GIC interrupt line to fire on expiration (if enabled). + * @base_timer: The basic timer functionality for this timer. * @tcsr: The Timer Control and Status Register. * @ticr: The Timer Initial Count Register. */ @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxTimer { NPCM7xxTimerCtrlState *ctrl; qemu_irq irq; - QEMUTimer qtimer; - int64_t expires_ns; - int64_t remaining_ns; + NPCM7xxBaseTimer base_timer; uint32_t tcsr; uint32_t ticr; } NPCM7xxTimer; +/** + * struct NPCM7xxWatchdogTimer - The watchdog timer state. + * @ctrl: The timer module that owns this timer. + * @irq: GIC interrupt line to fire on expiration (if enabled). + * @reset_signal: The GPIO used to send a reset signal. + * @base_timer: The basic timer functionality for this timer. + * @wtcr: The Watchdog Timer Control Register. + */ +typedef struct NPCM7xxWatchdogTimer { + NPCM7xxTimerCtrlState *ctrl; + + qemu_irq irq; + qemu_irq reset_signal; + NPCM7xxBaseTimer base_timer; + + uint32_t wtcr; +} NPCM7xxWatchdogTimer; + /** * struct NPCM7xxTimerCtrlState - Timer Module device state. * @parent: System bus device. * @iomem: Memory region through which registers are accessed. + * @index: The index of this timer module. * @tisr: The Timer Interrupt Status Register. - * @wtcr: The Watchdog Timer Control Register. * @timer: The five individual timers managed by this module. + * @watchdog_timer: The watchdog timer managed by this module. */ struct NPCM7xxTimerCtrlState { SysBusDevice parent; @@ -XXX,XX +XXX,XX @@ struct NPCM7xxTimerCtrlState { MemoryRegion iomem; uint32_t tisr; - uint32_t wtcr; NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL]; + NPCM7xxWatchdogTimer watchdog_timer; }; #define TYPE_NPCM7XX_TIMER "npcm7xx-timer" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_TIMER12_IRQ, NPCM7XX_TIMER13_IRQ, NPCM7XX_TIMER14_IRQ, + NPCM7XX_WDG0_IRQ = 47, /* Timer Module 0 Watchdog */ + NPCM7XX_WDG1_IRQ, /* Timer Module 1 Watchdog */ + NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) qemu_irq irq = npcm7xx_irq(s, first_irq + j); sysbus_connect_irq(sbd, j, irq); } + + /* IRQ for watchdogs */ + sysbus_connect_irq(sbd, NPCM7XX_TIMERS_PER_CTRL, + npcm7xx_irq(s, NPCM7XX_WDG0_IRQ + i)); + /* GPIO that connects clk module with watchdog */ + qdev_connect_gpio_out_named(DEVICE(&s->tim[i]), + NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 0, + qdev_get_gpio_in_named(DEVICE(&s->clk), + NPCM7XX_WATCHDOG_RESET_GPIO_IN, i)); } /* UART0..3 (16550 compatible) */ diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/misc/npcm7xx_clk.h" +#include "hw/timer/npcm7xx_timer.h" #include "migration/vmstate.h" #include "qemu/error-report.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qemu/units.h" #include "trace.h" +#include "sysemu/watchdog.h" #define PLLCON_LOKI BIT(31) #define PLLCON_LOKS BIT(30) @@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = { [NPCM7XX_CLK_AHBCKFI] = 0x000000c8, }; +/* Register Field Definitions */ +#define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex A9 Cores */ + +/* The number of watchdogs that can trigger a reset. */ +#define NPCM7XX_NR_WATCHDOGS (3) + static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset, s->regs[reg] = value; } +/* Perform reset action triggered by a watchdog */ +static void npcm7xx_clk_perform_watchdog_reset(void *opaque, int n, + int level) +{ + NPCM7xxCLKState *clk = NPCM7XX_CLK(opaque); + uint32_t rcr; + + g_assert(n >= 0 && n <= NPCM7XX_NR_WATCHDOGS); + rcr = clk->regs[NPCM7XX_CLK_WD0RCR + n]; + if (rcr & NPCM7XX_CLK_WDRCR_CA9C) { + watchdog_perform_action(); + } else { + qemu_log_mask(LOG_UNIMP, + "%s: only CPU reset is implemented. (requested 0x%" PRIx32")\n", + __func__, rcr); + } +} + static const struct MemoryRegionOps npcm7xx_clk_ops = { .read = npcm7xx_clk_read, .write = npcm7xx_clk_write, @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj) memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s, TYPE_NPCM7XX_CLK, 4 * KiB); sysbus_init_mmio(&s->parent, &s->iomem); + qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset, + NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS); } static const VMStateDescription vmstate_npcm7xx_clk = { diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/irq.h" +#include "hw/qdev-properties.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/timer/npcm7xx_timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ enum NPCM7xxTimerRegisters { #define NPCM7XX_TCSR_PRESCALE_START 0 #define NPCM7XX_TCSR_PRESCALE_LEN 8 +#define NPCM7XX_WTCR_WTCLK(rv) extract32(rv, 10, 2) +#define NPCM7XX_WTCR_FREEZE_EN BIT(9) +#define NPCM7XX_WTCR_WTE BIT(7) +#define NPCM7XX_WTCR_WTIE BIT(6) +#define NPCM7XX_WTCR_WTIS(rv) extract32(rv, 4, 2) +#define NPCM7XX_WTCR_WTIF BIT(3) +#define NPCM7XX_WTCR_WTRF BIT(2) +#define NPCM7XX_WTCR_WTRE BIT(1) +#define NPCM7XX_WTCR_WTR BIT(0) + +/* + * The number of clock cycles between interrupt and reset in watchdog, used + * by the software to handle the interrupt before system is reset. + */ +#define NPCM7XX_WATCHDOG_INTERRUPT_TO_RESET_CYCLES 1024 + +/* Start or resume the timer. */ +static void npcm7xx_timer_start(NPCM7xxBaseTimer *t) +{ + int64_t now; + + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + t->expires_ns = now + t->remaining_ns; + timer_mod(&t->qtimer, t->expires_ns); +} + +/* Stop counting. Record the time remaining so we can continue later. */ +static void npcm7xx_timer_pause(NPCM7xxBaseTimer *t) +{ + int64_t now; + + timer_del(&t->qtimer); + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + t->remaining_ns = t->expires_ns - now; +} + +/* Delete the timer and reset it to default state. */ +static void npcm7xx_timer_clear(NPCM7xxBaseTimer *t) +{ + timer_del(&t->qtimer); + t->expires_ns = 0; + t->remaining_ns = 0; +} + /* * Returns the index of timer in the tc->timer array. This can be used to * locate the registers that belong to this timer. @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) return count; } +static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t) +{ + switch (NPCM7XX_WTCR_WTCLK(t->wtcr)) { + case 0: + return 1; + case 1: + return 256; + case 2: + return 2048; + case 3: + return 65536; + default: + g_assert_not_reached(); + } +} + +static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t, + int64_t cycles) +{ + uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t); + int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles; + + /* + * The reset function always clears the current timer. The caller of the + * this needs to decide whether to start the watchdog timer based on + * specific flag in WTCR. + */ + npcm7xx_timer_clear(&t->base_timer); + + ns *= prescaler; + t->base_timer.remaining_ns = ns; +} + +static void npcm7xx_watchdog_timer_reset(NPCM7xxWatchdogTimer *t) +{ + int64_t cycles = 1; + uint32_t s = NPCM7XX_WTCR_WTIS(t->wtcr); + + g_assert(s <= 3); + + cycles <<= NPCM7XX_WATCHDOG_BASETIME_SHIFT; + cycles <<= 2 * s; + + npcm7xx_watchdog_timer_reset_cycles(t, cycles); +} + /* * Raise the interrupt line if there's a pending interrupt and interrupts are * enabled for this timer. If not, lower it. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_check_interrupt(NPCM7xxTimer *t) trace_npcm7xx_timer_irq(DEVICE(tc)->canonical_path, index, pending); } -/* Start or resume the timer. */ -static void npcm7xx_timer_start(NPCM7xxTimer *t) -{ - int64_t now; - - now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - t->expires_ns = now + t->remaining_ns; - timer_mod(&t->qtimer, t->expires_ns); -} - /* * Called when the counter reaches zero. Sets the interrupt flag, and either * restarts or disables the timer. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t) tc->tisr |= BIT(index); if (t->tcsr & NPCM7XX_TCSR_PERIODIC) { - t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); if (t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } else { t->tcsr &= ~(NPCM7XX_TCSR_CEN | NPCM7XX_TCSR_CACT); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t) npcm7xx_timer_check_interrupt(t); } -/* Stop counting. Record the time remaining so we can continue later. */ -static void npcm7xx_timer_pause(NPCM7xxTimer *t) -{ - int64_t now; - - timer_del(&t->qtimer); - now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - t->remaining_ns = t->expires_ns - now; -} /* * Restart the timer from its initial value. If the timer was enabled and stays @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_pause(NPCM7xxTimer *t) */ static void npcm7xx_timer_restart(NPCM7xxTimer *t, uint32_t old_tcsr) { - t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_timer_read_tdr(NPCM7xxTimer *t) if (t->tcsr & NPCM7XX_TCSR_CEN) { int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - return npcm7xx_timer_ns_to_count(t, t->expires_ns - now); + return npcm7xx_timer_ns_to_count(t, t->base_timer.expires_ns - now); } - return npcm7xx_timer_ns_to_count(t, t->remaining_ns); + return npcm7xx_timer_ns_to_count(t, t->base_timer.remaining_ns); } static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) if (npcm7xx_tcsr_prescaler(old_tcsr) != npcm7xx_tcsr_prescaler(new_tcsr)) { /* Recalculate time remaining based on the current TDR value. */ - t->remaining_ns = npcm7xx_timer_count_to_ns(t, tdr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, tdr); if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_CEN) { if (new_tcsr & NPCM7XX_TCSR_CEN) { t->tcsr |= NPCM7XX_TCSR_CACT; - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } else { t->tcsr &= ~NPCM7XX_TCSR_CACT; - npcm7xx_timer_pause(t); - if (t->remaining_ns <= 0) { + npcm7xx_timer_pause(&t->base_timer); + if (t->base_timer.remaining_ns <= 0) { npcm7xx_timer_reached_zero(t); } } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write_tisr(NPCM7xxTimerCtrlState *s, uint32_t value) if (value & (1U << i)) { npcm7xx_timer_check_interrupt(&s->timer[i]); } + } } +static void npcm7xx_timer_write_wtcr(NPCM7xxWatchdogTimer *t, uint32_t new_wtcr) +{ + uint32_t old_wtcr = t->wtcr; + + /* + * WTIF and WTRF are cleared by writing 1. Writing 0 makes these bits + * unchanged. + */ + if (new_wtcr & NPCM7XX_WTCR_WTIF) { + new_wtcr &= ~NPCM7XX_WTCR_WTIF; + } else if (old_wtcr & NPCM7XX_WTCR_WTIF) { + new_wtcr |= NPCM7XX_WTCR_WTIF; + } + if (new_wtcr & NPCM7XX_WTCR_WTRF) { + new_wtcr &= ~NPCM7XX_WTCR_WTRF; + } else if (old_wtcr & NPCM7XX_WTCR_WTRF) { + new_wtcr |= NPCM7XX_WTCR_WTRF; + } + + t->wtcr = new_wtcr; + + if (new_wtcr & NPCM7XX_WTCR_WTR) { + t->wtcr &= ~NPCM7XX_WTCR_WTR; + npcm7xx_watchdog_timer_reset(t); + if (new_wtcr & NPCM7XX_WTCR_WTE) { + npcm7xx_timer_start(&t->base_timer); + } + } else if ((old_wtcr ^ new_wtcr) & NPCM7XX_WTCR_WTE) { + if (new_wtcr & NPCM7XX_WTCR_WTE) { + npcm7xx_timer_start(&t->base_timer); + } else { + npcm7xx_timer_pause(&t->base_timer); + } + } + +} + static hwaddr npcm7xx_tcsr_index(hwaddr reg) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_timer_read(void *opaque, hwaddr offset, unsigned size) break; case NPCM7XX_TIMER_WTCR: - value = s->wtcr; + value = s->watchdog_timer.wtcr; break; default: @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_write(void *opaque, hwaddr offset, return; case NPCM7XX_TIMER_WTCR: - qemu_log_mask(LOG_UNIMP, "%s: WTCR write not implemented: 0x%08x\n", - __func__, value); + npcm7xx_timer_write_wtcr(&s->watchdog_timer, value); return; } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_enter_reset(Object *obj, ResetType type) for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { NPCM7xxTimer *t = &s->timer[i]; - timer_del(&t->qtimer); - t->expires_ns = 0; - t->remaining_ns = 0; + npcm7xx_timer_clear(&t->base_timer); t->tcsr = 0x00000005; t->ticr = 0x00000000; } s->tisr = 0x00000000; - s->wtcr = 0x00000400; + /* + * Set WTCLK to 1(default) and reset all flags except WTRF. + * WTRF is not reset during a core domain reset. + */ + s->watchdog_timer.wtcr = 0x00000400 | (s->watchdog_timer.wtcr & + NPCM7XX_WTCR_WTRF); +} + +static void npcm7xx_watchdog_timer_expired(void *opaque) +{ + NPCM7xxWatchdogTimer *t = opaque; + + if (t->wtcr & NPCM7XX_WTCR_WTE) { + if (t->wtcr & NPCM7XX_WTCR_WTIF) { + if (t->wtcr & NPCM7XX_WTCR_WTRE) { + t->wtcr |= NPCM7XX_WTCR_WTRF; + /* send reset signal to CLK module*/ + qemu_irq_raise(t->reset_signal); + } + } else { + t->wtcr |= NPCM7XX_WTCR_WTIF; + if (t->wtcr & NPCM7XX_WTCR_WTIE) { + /* send interrupt */ + qemu_irq_raise(t->irq); + } + npcm7xx_watchdog_timer_reset_cycles(t, + NPCM7XX_WATCHDOG_INTERRUPT_TO_RESET_CYCLES); + npcm7xx_timer_start(&t->base_timer); + } + } } static void npcm7xx_timer_hold_reset(Object *obj) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_hold_reset(Object *obj) for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { qemu_irq_lower(s->timer[i].irq); } + qemu_irq_lower(s->watchdog_timer.irq); } static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev); SysBusDevice *sbd = &s->parent; int i; + NPCM7xxWatchdogTimer *w; for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { NPCM7xxTimer *t = &s->timer[i]; t->ctrl = s; - timer_init_ns(&t->qtimer, QEMU_CLOCK_VIRTUAL, npcm7xx_timer_expired, t); + timer_init_ns(&t->base_timer.qtimer, QEMU_CLOCK_VIRTUAL, + npcm7xx_timer_expired, t); sysbus_init_irq(sbd, &t->irq); } + w = &s->watchdog_timer; + w->ctrl = s; + timer_init_ns(&w->base_timer.qtimer, QEMU_CLOCK_VIRTUAL, + npcm7xx_watchdog_timer_expired, w); + sysbus_init_irq(sbd, &w->irq); + memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s, TYPE_NPCM7XX_TIMER, 4 * KiB); sysbus_init_mmio(sbd, &s->iomem); + qdev_init_gpio_out_named(dev, &w->reset_signal, + NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1); } -static const VMStateDescription vmstate_npcm7xx_timer = { - .name = "npcm7xx-timer", +static const VMStateDescription vmstate_npcm7xx_base_timer = { + .name = "npcm7xx-base-timer", .version_id = 0, .minimum_version_id = 0, .fields = (VMStateField[]) { - VMSTATE_TIMER(qtimer, NPCM7xxTimer), - VMSTATE_INT64(expires_ns, NPCM7xxTimer), - VMSTATE_INT64(remaining_ns, NPCM7xxTimer), + VMSTATE_TIMER(qtimer, NPCM7xxBaseTimer), + VMSTATE_INT64(expires_ns, NPCM7xxBaseTimer), + VMSTATE_INT64(remaining_ns, NPCM7xxBaseTimer), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_timer = { + .name = "npcm7xx-timer", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_STRUCT(base_timer, NPCM7xxTimer, + 0, vmstate_npcm7xx_base_timer, + NPCM7xxBaseTimer), VMSTATE_UINT32(tcsr, NPCM7xxTimer), VMSTATE_UINT32(ticr, NPCM7xxTimer), VMSTATE_END_OF_LIST(), }, }; -static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { - .name = "npcm7xx-timer-ctrl", +static const VMStateDescription vmstate_npcm7xx_watchdog_timer = { + .name = "npcm7xx-watchdog-timer", .version_id = 0, .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_STRUCT(base_timer, NPCM7xxWatchdogTimer, + 0, vmstate_npcm7xx_base_timer, + NPCM7xxBaseTimer), + VMSTATE_UINT32(wtcr, NPCM7xxWatchdogTimer), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { + .name = "npcm7xx-timer-ctrl", + .version_id = 1, + .minimum_version_id = 1, .fields = (VMStateField[]) { VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState), - VMSTATE_UINT32(wtcr, NPCM7xxTimerCtrlState), VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState, NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer, NPCM7xxTimer), + VMSTATE_STRUCT(watchdog_timer, NPCM7xxTimerCtrlState, + 0, vmstate_npcm7xx_watchdog_timer, + NPCM7xxWatchdogTimer), VMSTATE_END_OF_LIST(), }, }; diff --git a/tests/qtest/npcm7xx_watchdog_timer-test.c b/tests/qtest/npcm7xx_watchdog_timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_watchdog_timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for Nuvoton NPCM7xx Timer Watchdog Modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/timer.h" + +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" + +#define WTCR_OFFSET 0x1c +#define REF_HZ (25000000) + +/* WTCR bit fields */ +#define WTCLK(rv) ((rv) << 10) +#define WTE BIT(7) +#define WTIE BIT(6) +#define WTIS(rv) ((rv) << 4) +#define WTIF BIT(3) +#define WTRF BIT(2) +#define WTRE BIT(1) +#define WTR BIT(0) + +typedef struct Watchdog { + int irq; + uint64_t base_addr; +} Watchdog; + +static const Watchdog watchdog_list[] = { + { + .irq = 47, + .base_addr = 0xf0008000 + }, + { + .irq = 48, + .base_addr = 0xf0009000 + }, + { + .irq = 49, + .base_addr = 0xf000a000 + } +}; + +static int watchdog_index(const Watchdog *wd) +{ + ptrdiff_t diff = wd - watchdog_list; + + g_assert(diff >= 0 && diff < ARRAY_SIZE(watchdog_list)); + + return diff; +} + +static uint32_t watchdog_read_wtcr(QTestState *qts, const Watchdog *wd) +{ + return qtest_readl(qts, wd->base_addr + WTCR_OFFSET); +} + +static void watchdog_write_wtcr(QTestState *qts, const Watchdog *wd, + uint32_t value) +{ + qtest_writel(qts, wd->base_addr + WTCR_OFFSET, value); +} + +static uint32_t watchdog_prescaler(QTestState *qts, const Watchdog *wd) +{ + switch (extract32(watchdog_read_wtcr(qts, wd), 10, 2)) { + case 0: + return 1; + case 1: + return 256; + case 2: + return 2048; + case 3: + return 65536; + default: + g_assert_not_reached(); + } +} + +static QDict *get_watchdog_action(QTestState *qts) +{ + QDict *ev = qtest_qmp_eventwait_ref(qts, "WATCHDOG"); + QDict *data; + + data = qdict_get_qdict(ev, "data"); + qobject_ref(data); + qobject_unref(ev); + return data; +} + +#define RESET_CYCLES 1024 +static uint32_t watchdog_interrupt_cycles(QTestState *qts, const Watchdog *wd) +{ + uint32_t wtis = extract32(watchdog_read_wtcr(qts, wd), 4, 2); + return 1 << (14 + 2 * wtis); +} + +static int64_t watchdog_calculate_steps(uint32_t count, uint32_t prescale) +{ + return (NANOSECONDS_PER_SECOND / REF_HZ) * count * prescale; +} + +static int64_t watchdog_interrupt_steps(QTestState *qts, const Watchdog *wd) +{ + return watchdog_calculate_steps(watchdog_interrupt_cycles(qts, wd), + watchdog_prescaler(qts, wd)); +} + +/* Check wtcr can be reset to default value */ +static void test_init(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts = qtest_init("-machine quanta-gsj"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + watchdog_write_wtcr(qts, wd, WTCLK(1) | WTRF | WTIF | WTR); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(1)); + + qtest_quit(qts); +} + +/* Check a watchdog can generate interrupt and reset actions */ +static void test_reset_action(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts = qtest_init("-machine quanta-gsj"); + QDict *ad; + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + + watchdog_write_wtcr(qts, wd, + WTCLK(0) | WTE | WTRF | WTRE | WTIF | WTIE | WTR); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTRE | WTIE); + + /* Check a watchdog can generate an interrupt */ + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTIF | WTIE | WTRE); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + /* Check a watchdog can generate a reset signal */ + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + ad = get_watchdog_action(qts); + /* The signal is a reset signal */ + g_assert_false(strcmp(qdict_get_str(ad, "action"), "reset")); + qobject_unref(ad); + qtest_qmp_eventwait(qts, "RESET"); + /* + * Make sure WTCR is reset to default except for WTRF bit which shouldn't + * be reset. + */ + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(1) | WTRF); + qtest_quit(qts); +} + +/* Check a watchdog works with all possible WTCLK prescalers and WTIS cycles */ +static void test_prescaler(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + + for (int wtclk = 0; wtclk < 4; ++wtclk) { + for (int wtis = 0; wtis < 4; ++wtis) { + QTestState *qts = qtest_init("-machine quanta-gsj"); + + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, + WTCLK(wtclk) | WTE | WTIF | WTIS(wtis) | WTIE | WTR); + /* + * The interrupt doesn't fire until watchdog_interrupt_steps() + * cycles passed + */ + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd) - 1); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, 1); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + qtest_quit(qts); + } + } +} + +/* + * Check a watchdog doesn't fire if corresponding flags (WTIE and WTRE) are not + * set. + */ +static void test_enabling_flags(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts; + + /* Neither WTIE or WTRE is set, no interrupt or reset should happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTRF); + qtest_quit(qts); + + /* Only WTIE is set, interrupt is triggered but reset should not happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTIE | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_true(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(watchdog_read_wtcr(qts, wd) & WTRF); + qtest_quit(qts); + + /* Only WTRE is set, interrupt is triggered but reset should not happen */ + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTRE | WTRF | WTR); + qtest_clock_step(qts, watchdog_interrupt_steps(qts, wd)); + g_assert_true(watchdog_read_wtcr(qts, wd) & WTIF); + g_assert_false(qtest_get_irq(qts, wd->irq)); + qtest_clock_step(qts, watchdog_calculate_steps(RESET_CYCLES, + watchdog_prescaler(qts, wd))); + g_assert_false(strcmp(qdict_get_str(get_watchdog_action(qts), "action"), + "reset")); + qtest_qmp_eventwait(qts, "RESET"); + qtest_quit(qts); + + /* + * The case when both flags are set is already tested in + * test_reset_action(). + */ +} + +/* Check a watchdog can pause and resume by setting WTE bits */ +static void test_pause(gconstpointer watchdog) +{ + const Watchdog *wd = watchdog; + QTestState *qts; + int64_t remaining_steps, steps; + + qts = qtest_init("-machine quanta-gsj"); + qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIF | WTIE | WTRF | WTR); + remaining_steps = watchdog_interrupt_steps(qts, wd); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTE | WTIE); + + /* Run for half of the execution period. */ + steps = remaining_steps / 2; + remaining_steps -= steps; + qtest_clock_step(qts, steps); + + /* Pause the watchdog */ + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTIE); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTIE); + + /* Run for a long period of time, the watchdog shouldn't fire */ + qtest_clock_step(qts, steps << 4); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTIE); + g_assert_false(qtest_get_irq(qts, wd->irq)); + + /* Resume the watchdog */ + watchdog_write_wtcr(qts, wd, WTCLK(0) | WTE | WTIE); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, WTCLK(0) | WTE | WTIE); + + /* Run for the reset of the execution period, the watchdog should fire */ + qtest_clock_step(qts, remaining_steps); + g_assert_cmphex(watchdog_read_wtcr(qts, wd), ==, + WTCLK(0) | WTE | WTIF | WTIE); + g_assert_true(qtest_get_irq(qts, wd->irq)); + + qtest_quit(qts); +} + +static void watchdog_add_test(const char *name, const Watchdog* wd, + GTestDataFunc fn) +{ + g_autofree char *full_name = g_strdup_printf( + "npcm7xx_watchdog_timer[%d]/%s", watchdog_index(wd), name); + qtest_add_data_func(full_name, wd, fn); +} +#define add_test(name, td) watchdog_add_test(#name, td, test_##name) + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + for (int i = 0; i < ARRAY_SIZE(watchdog_list); ++i) { + const Watchdog *wd = &watchdog_list[i]; + + add_test(init, wd); + add_test(reset_action, wd); + add_test(prescaler, wd); + add_test(enabling_flags, wd); + add_test(pause, wd); + } + + return g_test_run(); +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* F: include/hw/*/npcm7xx* +F: tests/qtest/npcm7xx* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ (config_all_devices.has_key('CONFIG_ISA_TESTDEV') ? ['endianness-test'] : []) + \ ['prom-env-test', 'boot-serial-test'] -qtests_npcm7xx = ['npcm7xx_timer-test'] +qtests_npcm7xx = ['npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/misc/npcm7xx_rng.h | 34 ++++ hw/arm/npcm7xx.c | 7 +- hw/misc/npcm7xx_rng.c | 180 +++++++++++++++++++++ tests/qtest/npcm7xx_rng-test.c | 278 +++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + tests/qtest/meson.build | 5 +- 9 files changed, 510 insertions(+), 3 deletions(-) create mode 100644 include/hw/misc/npcm7xx_rng.h create mode 100644 hw/misc/npcm7xx_rng.c create mode 100644 tests/qtest/npcm7xx_rng-test.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * DDR4 memory controller (dummy interface indicating memory training is done) * OTP controllers (no protection features) * Flash Interface Unit (FIU; no protection features) + * Random Number Generator (RNG) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Peripheral SPI controller (PSPI) * Analog to Digital Converter (ADC) * SD/MMC host - * Random Number Generator (RNG) * PECI interface * Pulse Width Modulation (PWM) * Tachometer diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" +#include "hw/misc/npcm7xx_rng.h" #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState key_storage; NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; + NPCM7xxRNGState rng; NPCM7xxFIUState fiu[2]; } NPCM7xxState; diff --git a/include/hw/misc/npcm7xx_rng.h b/include/hw/misc/npcm7xx_rng.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/npcm7xx_rng.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx Random Number Generator. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM7XX_RNG_H +#define NPCM7XX_RNG_H + +#include "hw/sysbus.h" + +typedef struct NPCM7xxRNGState { + SysBusDevice parent; + + MemoryRegion iomem; + + uint8_t rngcs; + uint8_t rngd; + uint8_t rngmode; +} NPCM7xxRNGState; + +#define TYPE_NPCM7XX_RNG "npcm7xx-rng" +#define NPCM7XX_RNG(obj) OBJECT_CHECK(NPCM7xxRNGState, (obj), TYPE_NPCM7XX_RNG) + +#endif /* NPCM7XX_RNG_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_GCR_BA (0xf0800000) #define NPCM7XX_CLK_BA (0xf0801000) #define NPCM7XX_MC_BA (0xf0824000) +#define NPCM7XX_RNG_BA (0xf000b000) /* Internal AHB SRAM */ #define NPCM7XX_RAM3_BA (0xc0008000) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "otp2", &s->fuse_array, TYPE_NPCM7XX_FUSE_ARRAY); object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC); + object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG); for (i = 0; i < ARRAY_SIZE(s->tim); i++) { object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) serial_hd(i), DEVICE_LITTLE_ENDIAN); } + /* Random Number Generator. Cannot fail. */ + sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); create_unimplemented_device("npcm7xx.kcs", 0xf0007000, 4 * KiB); - create_unimplemented_device("npcm7xx.rng", 0xf000b000, 4 * KiB); create_unimplemented_device("npcm7xx.adc", 0xf000c000, 4 * KiB); create_unimplemented_device("npcm7xx.gfxi", 0xf000e000, 4 * KiB); create_unimplemented_device("npcm7xx.gpio[0]", 0xf0010000, 4 * KiB); diff --git a/hw/misc/npcm7xx_rng.c b/hw/misc/npcm7xx_rng.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/npcm7xx_rng.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx Random Number Generator. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/misc/npcm7xx_rng.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/guest-random.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +#define NPCM7XX_RNG_REGS_SIZE (4 * KiB) + +#define NPCM7XX_RNGCS (0x00) +#define NPCM7XX_RNGCS_CLKP(rv) extract32(rv, 2, 4) +#define NPCM7XX_RNGCS_DVALID BIT(1) +#define NPCM7XX_RNGCS_RNGE BIT(0) + +#define NPCM7XX_RNGD (0x04) +#define NPCM7XX_RNGMODE (0x08) +#define NPCM7XX_RNGMODE_NORMAL (0x02) + +static bool npcm7xx_rng_is_enabled(NPCM7xxRNGState *s) +{ + return (s->rngcs & NPCM7XX_RNGCS_RNGE) && + (s->rngmode == NPCM7XX_RNGMODE_NORMAL); +} + +static uint64_t npcm7xx_rng_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCM7xxRNGState *s = opaque; + uint64_t value = 0; + + switch (offset) { + case NPCM7XX_RNGCS: + /* + * If the RNG is enabled, but we don't have any valid random data, try + * obtaining some and update the DVALID bit accordingly. + */ + if (!npcm7xx_rng_is_enabled(s)) { + s->rngcs &= ~NPCM7XX_RNGCS_DVALID; + } else if (!(s->rngcs & NPCM7XX_RNGCS_DVALID)) { + uint8_t byte = 0; + + if (qemu_guest_getrandom(&byte, sizeof(byte), NULL) == 0) { + s->rngd = byte; + s->rngcs |= NPCM7XX_RNGCS_DVALID; + } + } + value = s->rngcs; + break; + case NPCM7XX_RNGD: + if (npcm7xx_rng_is_enabled(s) && s->rngcs & NPCM7XX_RNGCS_DVALID) { + s->rngcs &= ~NPCM7XX_RNGCS_DVALID; + value = s->rngd; + s->rngd = 0; + } + break; + case NPCM7XX_RNGMODE: + value = s->rngmode; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } + + trace_npcm7xx_rng_read(offset, value, size); + + return value; +} + +static void npcm7xx_rng_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + NPCM7xxRNGState *s = opaque; + + trace_npcm7xx_rng_write(offset, value, size); + + switch (offset) { + case NPCM7XX_RNGCS: + s->rngcs &= NPCM7XX_RNGCS_DVALID; + s->rngcs |= value & ~NPCM7XX_RNGCS_DVALID; + break; + case NPCM7XX_RNGD: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + case NPCM7XX_RNGMODE: + s->rngmode = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, offset); + break; + } +} + +static const MemoryRegionOps npcm7xx_rng_ops = { + .read = npcm7xx_rng_read, + .write = npcm7xx_rng_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void npcm7xx_rng_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxRNGState *s = NPCM7XX_RNG(obj); + + s->rngcs = 0; + s->rngd = 0; + s->rngmode = 0; +} + +static void npcm7xx_rng_init(Object *obj) +{ + NPCM7xxRNGState *s = NPCM7XX_RNG(obj); + + memory_region_init_io(&s->iomem, obj, &npcm7xx_rng_ops, s, "regs", + NPCM7XX_RNG_REGS_SIZE); + sysbus_init_mmio(&s->parent, &s->iomem); +} + +static const VMStateDescription vmstate_npcm7xx_rng = { + .name = "npcm7xx-rng", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(rngcs, NPCM7xxRNGState), + VMSTATE_UINT8(rngd, NPCM7xxRNGState), + VMSTATE_UINT8(rngmode, NPCM7xxRNGState), + VMSTATE_END_OF_LIST(), + }, +}; + +static void npcm7xx_rng_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM7xx Random Number Generator"; + dc->vmsd = &vmstate_npcm7xx_rng; + rc->phases.enter = npcm7xx_rng_enter_reset; +} + +static const TypeInfo npcm7xx_rng_types[] = { + { + .name = TYPE_NPCM7XX_RNG, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxRNGState), + .class_init = npcm7xx_rng_class_init, + .instance_init = npcm7xx_rng_init, + }, +}; +DEFINE_TYPES(npcm7xx_rng_types); diff --git a/tests/qtest/npcm7xx_rng-test.c b/tests/qtest/npcm7xx_rng-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_rng-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Nuvoton NPCM7xx Random Number Generator + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include <math.h> + +#include "libqtest-single.h" +#include "qemu/bitops.h" + +#define RNG_BASE_ADDR 0xf000b000 + +/* Control and Status Register */ +#define RNGCS 0x00 +# define DVALID BIT(1) /* Data Valid */ +# define RNGE BIT(0) /* RNG Enable */ +/* Data Register */ +#define RNGD 0x04 +/* Mode Register */ +#define RNGMODE 0x08 +# define ROSEL_NORMAL (2) /* RNG only works in this mode */ + +/* Number of bits to collect for randomness tests. */ +#define TEST_INPUT_BITS (128) + +static void rng_writeb(unsigned int offset, uint8_t value) +{ + writeb(RNG_BASE_ADDR + offset, value); +} + +static uint8_t rng_readb(unsigned int offset) +{ + return readb(RNG_BASE_ADDR + offset); +} + +/* Disable RNG and set normal ring oscillator mode. */ +static void rng_reset(void) +{ + rng_writeb(RNGCS, 0); + rng_writeb(RNGMODE, ROSEL_NORMAL); +} + +/* Reset RNG and then enable it. */ +static void rng_reset_enable(void) +{ + rng_reset(); + rng_writeb(RNGCS, RNGE); +} + +/* Wait until Data Valid bit is set. */ +static bool rng_wait_ready(void) +{ + /* qemu_guest_getrandom may fail. Assume it won't fail 10 times in a row. */ + int retries = 10; + + while (retries-- > 0) { + if (rng_readb(RNGCS) & DVALID) { + return true; + } + } + + return false; +} + +/* + * Perform a frequency (monobit) test, as defined by NIST SP 800-22, on the + * sequence in buf and return the P-value. This represents the probability of a + * truly random sequence having the same proportion of zeros and ones as the + * sequence in buf. + * + * An RNG which always returns 0x00 or 0xff, or has some bits stuck at 0 or 1, + * will fail this test. However, an RNG which always returns 0x55, 0xf0 or some + * other value with an equal number of zeroes and ones will pass. + */ +static double calc_monobit_p(const uint8_t *buf, unsigned int len) +{ + unsigned int i; + double s_obs; + int sn = 0; + + for (i = 0; i < len; i++) { + /* + * Each 1 counts as 1, each 0 counts as -1. + * s = cp - (8 - cp) = 2 * cp - 8 + */ + sn += 2 * ctpop8(buf[i]) - 8; + } + + s_obs = abs(sn) / sqrt(len * BITS_PER_BYTE); + + return erfc(s_obs / sqrt(2)); +} + +/* + * Perform a runs test, as defined by NIST SP 800-22, and return the P-value. + * This represents the probability of a truly random sequence having the same + * number of runs (i.e. uninterrupted sequences of identical bits) as the + * sequence in buf. + */ +static double calc_runs_p(const unsigned long *buf, unsigned int nr_bits) +{ + unsigned int j; + unsigned int k; + int nr_ones = 0; + int vn_obs = 0; + double pi; + + g_assert(nr_bits % BITS_PER_LONG == 0); + + for (j = 0; j < nr_bits / BITS_PER_LONG; j++) { + nr_ones += __builtin_popcountl(buf[j]); + } + pi = (double)nr_ones / nr_bits; + + for (k = 0; k < nr_bits - 1; k++) { + vn_obs += !(test_bit(k, buf) ^ test_bit(k + 1, buf)); + } + vn_obs += 1; + + return erfc(fabs(vn_obs - 2 * nr_bits * pi * (1.0 - pi)) + / (2 * sqrt(2 * nr_bits) * pi * (1.0 - pi))); +} + +/* + * Verifies that DVALID is clear, and RNGD reads zero, when RNGE is cleared, + * and DVALID eventually becomes set when RNGE is set. + */ +static void test_enable_disable(void) +{ + /* Disable: DVALID should not be set, and RNGD should read zero */ + rng_reset(); + g_assert_cmphex(rng_readb(RNGCS), ==, 0); + g_assert_cmphex(rng_readb(RNGD), ==, 0); + + /* Enable: DVALID should be set, but we can't make assumptions about RNGD */ + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + g_assert_cmphex(rng_readb(RNGCS), ==, DVALID | RNGE); + + /* Disable: DVALID should not be set, and RNGD should read zero */ + rng_writeb(RNGCS, 0); + g_assert_cmphex(rng_readb(RNGCS), ==, 0); + g_assert_cmphex(rng_readb(RNGD), ==, 0); +} + +/* + * Verifies that the RNG only produces data when RNGMODE is set to 'normal' + * ring oscillator mode. + */ +static void test_rosel(void) +{ + rng_reset_enable(); + g_assert_true(rng_wait_ready()); + rng_writeb(RNGMODE, 0); + g_assert_false(rng_wait_ready()); + rng_writeb(RNGMODE, ROSEL_NORMAL); + g_assert_true(rng_wait_ready()); + rng_writeb(RNGMODE, 0); + g_assert_false(rng_wait_ready()); +} + +/* + * Verifies that a continuous sequence of bits collected after enabling the RNG + * satisfies a monobit test. + */ +static void test_continuous_monobit(void) +{ + uint8_t buf[TEST_INPUT_BITS / BITS_PER_BYTE]; + unsigned int i; + + rng_reset_enable(); + for (i = 0; i < sizeof(buf); i++) { + g_assert_true(rng_wait_ready()); + buf[i] = rng_readb(RNGD); + } + + g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); +} + +/* + * Verifies that a continuous sequence of bits collected after enabling the RNG + * satisfies a runs test. + */ +static void test_continuous_runs(void) +{ + union { + unsigned long l[TEST_INPUT_BITS / BITS_PER_LONG]; + uint8_t c[TEST_INPUT_BITS / BITS_PER_BYTE]; + } buf; + unsigned int i; + + rng_reset_enable(); + for (i = 0; i < sizeof(buf); i++) { + g_assert_true(rng_wait_ready()); + buf.c[i] = rng_readb(RNGD); + } + + g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); +} + +/* + * Verifies that the first data byte collected after enabling the RNG satisfies + * a monobit test. + */ +static void test_first_byte_monobit(void) +{ + /* Enable, collect one byte, disable. Repeat until we have 100 bits. */ + uint8_t buf[TEST_INPUT_BITS / BITS_PER_BYTE]; + unsigned int i; + + rng_reset(); + for (i = 0; i < sizeof(buf); i++) { + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + buf[i] = rng_readb(RNGD); + rng_writeb(RNGCS, 0); + } + + g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); +} + +/* + * Verifies that the first data byte collected after enabling the RNG satisfies + * a runs test. + */ +static void test_first_byte_runs(void) +{ + /* Enable, collect one byte, disable. Repeat until we have 100 bits. */ + union { + unsigned long l[TEST_INPUT_BITS / BITS_PER_LONG]; + uint8_t c[TEST_INPUT_BITS / BITS_PER_BYTE]; + } buf; + unsigned int i; + + rng_reset(); + for (i = 0; i < sizeof(buf); i++) { + rng_writeb(RNGCS, RNGE); + g_assert_true(rng_wait_ready()); + buf.c[i] = rng_readb(RNGD); + rng_writeb(RNGCS, 0); + } + + g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("npcm7xx_rng/enable_disable", test_enable_disable); + qtest_add_func("npcm7xx_rng/rosel", test_rosel); + qtest_add_func("npcm7xx_rng/continuous/monobit", test_continuous_monobit); + qtest_add_func("npcm7xx_rng/continuous/runs", test_continuous_runs); + qtest_add_func("npcm7xx_rng/first_byte/monobit", test_first_byte_monobit); + qtest_add_func("npcm7xx_rng/first_byte/runs", test_first_byte_runs); + + qtest_start("-machine npcm750-evb"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c')) softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files( 'npcm7xx_clk.c', 'npcm7xx_gcr.c', + 'npcm7xx_rng.c', )) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files( 'omap_clk.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_clk_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " valu npcm7xx_gcr_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +# npcm7xx_rng.c +npcm7xx_rng_read(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" +npcm7xx_rng_write(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u" + # stm32f4xx_syscfg.c stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d" stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d" diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ (config_all_devices.has_key('CONFIG_ISA_TESTDEV') ? ['endianness-test'] : []) + \ ['prom-env-test', 'boot-serial-test'] -qtests_npcm7xx = ['npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] +qtests_npcm7xx = \ + ['npcm7xx_rng-test', + 'npcm7xx_timer-test', + 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The NPCM730 and NPCM750 chips have a single USB host port shared between a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This adds support for both of them. Testing notes: * With -device usb-kbd, qemu will automatically insert a full-speed hub, and the keyboard becomes controlled by the OHCI controller. * With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly attached to the port without any hubs, and the device becomes controlled by the EHCI controller since it's high speed capable. * With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the keyboard is directly attached to the port, but it only advertises itself as full-speed capable, so it becomes controlled by the OHCI controller. In all cases, the keyboard device enumerates correctly. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- hw/usb/hcd-ehci.h | 1 + include/hw/arm/npcm7xx.h | 4 ++++ hw/arm/npcm7xx.c | 27 +++++++++++++++++++++++++-- hw/usb/hcd-ehci-sysbus.c | 19 +++++++++++++++++++ 5 files changed, 50 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * OTP controllers (no protection features) * Flash Interface Unit (FIU; no protection features) * Random Number Generator (RNG) + * USB host (USBH) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * eSPI slave interface * Ethernet controllers (GMAC and EMC) - * USB host (USBH) * USB device (USBD) * SMBus controller (SMBF) * Peripheral SPI controller (PSPI) diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.h +++ b/hw/usb/hcd-ehci.h @@ -XXX,XX +XXX,XX @@ struct EHCIPCIState { #define TYPE_PLATFORM_EHCI "platform-ehci-usb" #define TYPE_EXYNOS4210_EHCI "exynos4210-ehci-usb" #define TYPE_AW_H3_EHCI "aw-h3-ehci-usb" +#define TYPE_NPCM7XX_EHCI "npcm7xx-ehci-usb" #define TYPE_TEGRA2_EHCI "tegra2-ehci-usb" #define TYPE_PPC4xx_EHCI "ppc4xx-ehci-usb" #define TYPE_FUSBH200_EHCI "fusbh200-ehci-usb" diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/usb/hcd-ehci.h" +#include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" #define NPCM7XX_MAX_NUM_CPUS (2) @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; NPCM7xxRNGState rng; + EHCISysBusState ehci; + OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; } NPCM7xxState; diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_MC_BA (0xf0824000) #define NPCM7XX_RNG_BA (0xf000b000) +/* USB Host modules */ +#define NPCM7XX_EHCI_BA (0xf0806000) +#define NPCM7XX_OHCI_BA (0xf0807000) + /* Internal AHB SRAM */ #define NPCM7XX_RAM3_BA (0xc0008000) #define NPCM7XX_RAM3_SZ (4 * KiB) @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG0_IRQ = 47, /* Timer Module 0 Watchdog */ NPCM7XX_WDG1_IRQ, /* Timer Module 1 Watchdog */ NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ + NPCM7XX_EHCI_IRQ = 61, + NPCM7XX_OHCI_IRQ = 62, }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); } + object_initialize_child(obj, "ehci", &s->ehci, TYPE_NPCM7XX_EHCI); + object_initialize_child(obj, "ohci", &s->ohci, TYPE_SYSBUS_OHCI); + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_fiu) != ARRAY_SIZE(s->fiu)); for (i = 0; i < ARRAY_SIZE(s->fiu); i++) { object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i], @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* USB Host */ + object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true, + &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->ehci), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci), 0, NPCM7XX_EHCI_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci), 0, + npcm7xx_irq(s, NPCM7XX_EHCI_IRQ)); + + object_property_set_str(OBJECT(&s->ohci), "masterbus", "usb-bus.0", + &error_abort); + object_property_set_uint(OBJECT(&s->ohci), "num-ports", 1, &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->ohci), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ohci), 0, NPCM7XX_OHCI_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci), 0, + npcm7xx_irq(s, NPCM7XX_OHCI_IRQ)); + /* * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects * specified, but this is a programming error. @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); create_unimplemented_device("npcm7xx.gmac2", 0xf0804000, 8 * KiB); - create_unimplemented_device("npcm7xx.ehci", 0xf0806000, 4 * KiB); - create_unimplemented_device("npcm7xx.ohci", 0xf0807000, 4 * KiB); create_unimplemented_device("npcm7xx.vcd", 0xf0810000, 64 * KiB); create_unimplemented_device("npcm7xx.ece", 0xf0820000, 8 * KiB); create_unimplemented_device("npcm7xx.vdma", 0xf0822000, 8 * KiB); diff --git a/hw/usb/hcd-ehci-sysbus.c b/hw/usb/hcd-ehci-sysbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci-sysbus.c +++ b/hw/usb/hcd-ehci-sysbus.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ehci_aw_h3_type_info = { .class_init = ehci_aw_h3_class_init, }; +static void ehci_npcm7xx_class_init(ObjectClass *oc, void *data) +{ + SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); + DeviceClass *dc = DEVICE_CLASS(oc); + + sec->capsbase = 0x0; + sec->opregbase = 0x10; + sec->portscbase = 0x44; + sec->portnr = 1; + set_bit(DEVICE_CATEGORY_USB, dc->categories); +} + +static const TypeInfo ehci_npcm7xx_type_info = { + .name = TYPE_NPCM7XX_EHCI, + .parent = TYPE_SYS_BUS_EHCI, + .class_init = ehci_npcm7xx_class_init, +}; + static void ehci_tegra2_class_init(ObjectClass *oc, void *data) { SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void ehci_sysbus_register_types(void) type_register_static(&ehci_platform_type_info); type_register_static(&ehci_exynos4210_type_info); type_register_static(&ehci_aw_h3_type_info); + type_register_static(&ehci_npcm7xx_type_info); type_register_static(&ehci_tegra2_type_info); type_register_static(&ehci_ppc4xx_type_info); type_register_static(&ehci_fusbh200_type_info); -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 + include/hw/gpio/npcm7xx_gpio.h | 55 +++++ hw/arm/npcm7xx.c | 80 ++++++ hw/gpio/npcm7xx_gpio.c | 424 ++++++++++++++++++++++++++++++++ tests/qtest/npcm7xx_gpio-test.c | 385 +++++++++++++++++++++++++++++ hw/gpio/meson.build | 1 + hw/gpio/trace-events | 7 + tests/qtest/meson.build | 3 +- 9 files changed, 957 insertions(+), 2 deletions(-) create mode 100644 include/hw/gpio/npcm7xx_gpio.h create mode 100644 hw/gpio/npcm7xx_gpio.c create mode 100644 tests/qtest/npcm7xx_gpio-test.c diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Flash Interface Unit (FIU; no protection features) * Random Number Generator (RNG) * USB host (USBH) + * GPIO controller Missing devices --------------- - * GPIO controller * LPC/eSPI host-to-BMC interface, including * Keyboard and mouse controller interface (KBCI) diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/cpu/a9mpcore.h" +#include "hw/gpio/npcm7xx_gpio.h" #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/misc/npcm7xx_gcr.h" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxOTPState fuse_array; NPCM7xxMCState mc; NPCM7xxRNGState rng; + NPCM7xxGPIOState gpio[8]; EHCISysBusState ehci; OHCISysBusState ohci; NPCM7xxFIUState fiu[2]; diff --git a/include/hw/gpio/npcm7xx_gpio.h b/include/hw/gpio/npcm7xx_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/npcm7xx_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx General Purpose Input / Output (GPIO) + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef NPCM7XX_GPIO_H +#define NPCM7XX_GPIO_H + +#include "exec/memory.h" +#include "hw/sysbus.h" + +/* Number of pins managed by each controller. */ +#define NPCM7XX_GPIO_NR_PINS (32) + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM7XX_GPIO_NR_REGS (0x80 / sizeof(uint32_t)) + +typedef struct NPCM7xxGPIOState { + SysBusDevice parent; + + /* Properties to be defined by the SoC */ + uint32_t reset_pu; + uint32_t reset_pd; + uint32_t reset_osrc; + uint32_t reset_odsc; + + MemoryRegion mmio; + + qemu_irq irq; + qemu_irq output[NPCM7XX_GPIO_NR_PINS]; + + uint32_t pin_level; + uint32_t ext_level; + uint32_t ext_driven; + + uint32_t regs[NPCM7XX_GPIO_NR_REGS]; +} NPCM7xxGPIOState; + +#define TYPE_NPCM7XX_GPIO "npcm7xx-gpio" +#define NPCM7XX_GPIO(obj) \ + OBJECT_CHECK(NPCM7xxGPIOState, (obj), TYPE_NPCM7XX_GPIO) + +#endif /* NPCM7XX_GPIO_H */ diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ NPCM7XX_EHCI_IRQ = 61, NPCM7XX_OHCI_IRQ = 62, + NPCM7XX_GPIO0_IRQ = 116, + NPCM7XX_GPIO1_IRQ, + NPCM7XX_GPIO2_IRQ, + NPCM7XX_GPIO3_IRQ, + NPCM7XX_GPIO4_IRQ, + NPCM7XX_GPIO5_IRQ, + NPCM7XX_GPIO6_IRQ, + NPCM7XX_GPIO7_IRQ, }; /* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */ @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_fiu3_flash_addr[] = { 0xb8000000, /* CS3 */ }; +static const struct { + hwaddr regs_addr; + uint32_t unconnected_pins; + uint32_t reset_pu; + uint32_t reset_pd; + uint32_t reset_osrc; + uint32_t reset_odsc; +} npcm7xx_gpio[] = { + { + .regs_addr = 0xf0010000, + .reset_pu = 0xff03ffff, + .reset_pd = 0x00fc0000, + }, { + .regs_addr = 0xf0011000, + .unconnected_pins = 0x0000001e, + .reset_pu = 0xfefffe07, + .reset_pd = 0x010001e0, + }, { + .regs_addr = 0xf0012000, + .reset_pu = 0x780fffff, + .reset_pd = 0x07f00000, + .reset_odsc = 0x00700000, + }, { + .regs_addr = 0xf0013000, + .reset_pu = 0x00fc0000, + .reset_pd = 0xff000000, + }, { + .regs_addr = 0xf0014000, + .reset_pu = 0xffffffff, + }, { + .regs_addr = 0xf0015000, + .reset_pu = 0xbf83f801, + .reset_pd = 0x007c0000, + .reset_osrc = 0x000000f1, + .reset_odsc = 0x3f9f80f1, + }, { + .regs_addr = 0xf0016000, + .reset_pu = 0xfc00f801, + .reset_pd = 0x000007fe, + .reset_odsc = 0x00000800, + }, { + .regs_addr = 0xf0017000, + .unconnected_pins = 0xffffff00, + .reset_pu = 0x0000007f, + .reset_osrc = 0x0000007f, + .reset_odsc = 0x0000007f, + }, +}; + static const struct { const char *name; hwaddr regs_addr; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); } + for (i = 0; i < ARRAY_SIZE(s->gpio); i++) { + object_initialize_child(obj, "gpio[*]", &s->gpio[i], TYPE_NPCM7XX_GPIO); + } + object_initialize_child(obj, "ehci", &s->ehci, TYPE_NPCM7XX_EHCI); object_initialize_child(obj, "ohci", &s->ohci, TYPE_SYSBUS_OHCI); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM7XX_RNG_BA); + /* GPIO modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_gpio) != ARRAY_SIZE(s->gpio)); + for (i = 0; i < ARRAY_SIZE(s->gpio); i++) { + Object *obj = OBJECT(&s->gpio[i]); + + object_property_set_uint(obj, "reset-pullup", + npcm7xx_gpio[i].reset_pu, &error_abort); + object_property_set_uint(obj, "reset-pulldown", + npcm7xx_gpio[i].reset_pd, &error_abort); + object_property_set_uint(obj, "reset-osrc", + npcm7xx_gpio[i].reset_osrc, &error_abort); + object_property_set_uint(obj, "reset-odsc", + npcm7xx_gpio[i].reset_odsc, &error_abort); + sysbus_realize(SYS_BUS_DEVICE(obj), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(obj), 0, npcm7xx_gpio[i].regs_addr); + sysbus_connect_irq(SYS_BUS_DEVICE(obj), 0, + npcm7xx_irq(s, NPCM7XX_GPIO0_IRQ + i)); + } + /* USB Host */ object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true, &error_abort); diff --git a/hw/gpio/npcm7xx_gpio.c b/hw/gpio/npcm7xx_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/npcm7xx_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM7xx General Purpose Input / Output (GPIO) + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/gpio/npcm7xx_gpio.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "trace.h" + +/* 32-bit register indices. */ +enum NPCM7xxGPIORegister { + NPCM7XX_GPIO_TLOCK1, + NPCM7XX_GPIO_DIN, + NPCM7XX_GPIO_POL, + NPCM7XX_GPIO_DOUT, + NPCM7XX_GPIO_OE, + NPCM7XX_GPIO_OTYP, + NPCM7XX_GPIO_MP, + NPCM7XX_GPIO_PU, + NPCM7XX_GPIO_PD, + NPCM7XX_GPIO_DBNC, + NPCM7XX_GPIO_EVTYP, + NPCM7XX_GPIO_EVBE, + NPCM7XX_GPIO_OBL0, + NPCM7XX_GPIO_OBL1, + NPCM7XX_GPIO_OBL2, + NPCM7XX_GPIO_OBL3, + NPCM7XX_GPIO_EVEN, + NPCM7XX_GPIO_EVENS, + NPCM7XX_GPIO_EVENC, + NPCM7XX_GPIO_EVST, + NPCM7XX_GPIO_SPLCK, + NPCM7XX_GPIO_MPLCK, + NPCM7XX_GPIO_IEM, + NPCM7XX_GPIO_OSRC, + NPCM7XX_GPIO_ODSC, + NPCM7XX_GPIO_DOS = 0x68 / sizeof(uint32_t), + NPCM7XX_GPIO_DOC, + NPCM7XX_GPIO_OES, + NPCM7XX_GPIO_OEC, + NPCM7XX_GPIO_TLOCK2 = 0x7c / sizeof(uint32_t), + NPCM7XX_GPIO_REGS_END, +}; + +#define NPCM7XX_GPIO_REGS_SIZE (4 * KiB) + +#define NPCM7XX_GPIO_LOCK_MAGIC1 (0xc0defa73) +#define NPCM7XX_GPIO_LOCK_MAGIC2 (0xc0de1248) + +static void npcm7xx_gpio_update_events(NPCM7xxGPIOState *s, uint32_t din_diff) +{ + uint32_t din_new = s->regs[NPCM7XX_GPIO_DIN]; + + /* Trigger on high level */ + s->regs[NPCM7XX_GPIO_EVST] |= din_new & ~s->regs[NPCM7XX_GPIO_EVTYP]; + /* Trigger on both edges */ + s->regs[NPCM7XX_GPIO_EVST] |= (din_diff & s->regs[NPCM7XX_GPIO_EVTYP] + & s->regs[NPCM7XX_GPIO_EVBE]); + /* Trigger on rising edge */ + s->regs[NPCM7XX_GPIO_EVST] |= (din_diff & din_new + & s->regs[NPCM7XX_GPIO_EVTYP]); + + trace_npcm7xx_gpio_update_events(DEVICE(s)->canonical_path, + s->regs[NPCM7XX_GPIO_EVST], + s->regs[NPCM7XX_GPIO_EVEN]); + qemu_set_irq(s->irq, !!(s->regs[NPCM7XX_GPIO_EVST] + & s->regs[NPCM7XX_GPIO_EVEN])); +} + +static void npcm7xx_gpio_update_pins(NPCM7xxGPIOState *s, uint32_t diff) +{ + uint32_t drive_en; + uint32_t drive_lvl; + uint32_t not_driven; + uint32_t undefined; + uint32_t pin_diff; + uint32_t din_old; + + /* Calculate level of each pin driven by GPIO controller. */ + drive_lvl = s->regs[NPCM7XX_GPIO_DOUT] ^ s->regs[NPCM7XX_GPIO_POL]; + /* If OTYP=1, only drive low (open drain) */ + drive_en = s->regs[NPCM7XX_GPIO_OE] & ~(s->regs[NPCM7XX_GPIO_OTYP] + & drive_lvl); + /* + * If a pin is driven to opposite levels by the GPIO controller and the + * external driver, the result is undefined. + */ + undefined = drive_en & s->ext_driven & (drive_lvl ^ s->ext_level); + if (undefined) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: pins have multiple drivers: 0x%" PRIx32 "\n", + DEVICE(s)->canonical_path, undefined); + } + + not_driven = ~(drive_en | s->ext_driven); + pin_diff = s->pin_level; + + /* Set pins to externally driven level. */ + s->pin_level = s->ext_level & s->ext_driven; + /* Set internally driven pins, ignoring any conflicts. */ + s->pin_level |= drive_lvl & drive_en; + /* Pull up undriven pins with internal pull-up enabled. */ + s->pin_level |= not_driven & s->regs[NPCM7XX_GPIO_PU]; + /* Pins not driven, pulled up or pulled down are undefined */ + undefined |= not_driven & ~(s->regs[NPCM7XX_GPIO_PU] + | s->regs[NPCM7XX_GPIO_PD]); + + /* If any pins changed state, update the outgoing GPIOs. */ + pin_diff ^= s->pin_level; + pin_diff |= undefined & diff; + if (pin_diff) { + int i; + + for (i = 0; i < NPCM7XX_GPIO_NR_PINS; i++) { + uint32_t mask = BIT(i); + if (pin_diff & mask) { + int level = (undefined & mask) ? -1 : !!(s->pin_level & mask); + trace_npcm7xx_gpio_set_output(DEVICE(s)->canonical_path, + i, level); + qemu_set_irq(s->output[i], level); + } + } + } + + /* Calculate new value of DIN after masking and polarity setting. */ + din_old = s->regs[NPCM7XX_GPIO_DIN]; + s->regs[NPCM7XX_GPIO_DIN] = ((s->pin_level & s->regs[NPCM7XX_GPIO_IEM]) + ^ s->regs[NPCM7XX_GPIO_POL]); + + /* See if any new events triggered because of all this. */ + npcm7xx_gpio_update_events(s, din_old ^ s->regs[NPCM7XX_GPIO_DIN]); +} + +static bool npcm7xx_gpio_is_locked(NPCM7xxGPIOState *s) +{ + return s->regs[NPCM7XX_GPIO_TLOCK1] == 1; +} + +static uint64_t npcm7xx_gpio_regs_read(void *opaque, hwaddr addr, + unsigned int size) +{ + hwaddr reg = addr / sizeof(uint32_t); + NPCM7xxGPIOState *s = opaque; + uint64_t value = 0; + + switch (reg) { + case NPCM7XX_GPIO_TLOCK1 ... NPCM7XX_GPIO_EVEN: + case NPCM7XX_GPIO_EVST ... NPCM7XX_GPIO_ODSC: + value = s->regs[reg]; + break; + + case NPCM7XX_GPIO_EVENS ... NPCM7XX_GPIO_EVENC: + case NPCM7XX_GPIO_DOS ... NPCM7XX_GPIO_TLOCK2: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from write-only register 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: read from invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } + + trace_npcm7xx_gpio_read(DEVICE(s)->canonical_path, addr, value); + + return value; +} + +static void npcm7xx_gpio_regs_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + hwaddr reg = addr / sizeof(uint32_t); + NPCM7xxGPIOState *s = opaque; + uint32_t value = v; + uint32_t diff; + + trace_npcm7xx_gpio_write(DEVICE(s)->canonical_path, addr, v); + + if (npcm7xx_gpio_is_locked(s)) { + switch (reg) { + case NPCM7XX_GPIO_TLOCK1: + if (s->regs[NPCM7XX_GPIO_TLOCK2] == NPCM7XX_GPIO_LOCK_MAGIC2 && + value == NPCM7XX_GPIO_LOCK_MAGIC1) { + s->regs[NPCM7XX_GPIO_TLOCK1] = 0; + s->regs[NPCM7XX_GPIO_TLOCK2] = 0; + } + break; + + case NPCM7XX_GPIO_TLOCK2: + s->regs[reg] = value; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to locked register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } + + return; + } + + diff = s->regs[reg] ^ value; + + switch (reg) { + case NPCM7XX_GPIO_TLOCK1: + case NPCM7XX_GPIO_TLOCK2: + s->regs[NPCM7XX_GPIO_TLOCK1] = 1; + s->regs[NPCM7XX_GPIO_TLOCK2] = 0; + break; + + case NPCM7XX_GPIO_DIN: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register @ 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + + case NPCM7XX_GPIO_POL: + case NPCM7XX_GPIO_DOUT: + case NPCM7XX_GPIO_OE: + case NPCM7XX_GPIO_OTYP: + case NPCM7XX_GPIO_PU: + case NPCM7XX_GPIO_PD: + case NPCM7XX_GPIO_IEM: + s->regs[reg] = value; + npcm7xx_gpio_update_pins(s, diff); + break; + + case NPCM7XX_GPIO_DOS: + s->regs[NPCM7XX_GPIO_DOUT] |= value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_DOC: + s->regs[NPCM7XX_GPIO_DOUT] &= ~value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_OES: + s->regs[NPCM7XX_GPIO_OE] |= value; + npcm7xx_gpio_update_pins(s, value); + break; + case NPCM7XX_GPIO_OEC: + s->regs[NPCM7XX_GPIO_OE] &= ~value; + npcm7xx_gpio_update_pins(s, value); + break; + + case NPCM7XX_GPIO_EVTYP: + case NPCM7XX_GPIO_EVBE: + case NPCM7XX_GPIO_EVEN: + s->regs[reg] = value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_EVENS: + s->regs[NPCM7XX_GPIO_EVEN] |= value; + npcm7xx_gpio_update_events(s, 0); + break; + case NPCM7XX_GPIO_EVENC: + s->regs[NPCM7XX_GPIO_EVEN] &= ~value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_EVST: + s->regs[reg] &= ~value; + npcm7xx_gpio_update_events(s, 0); + break; + + case NPCM7XX_GPIO_MP: + case NPCM7XX_GPIO_DBNC: + case NPCM7XX_GPIO_OSRC: + case NPCM7XX_GPIO_ODSC: + /* Nothing to do; just store the value. */ + s->regs[reg] = value; + break; + + case NPCM7XX_GPIO_OBL0: + case NPCM7XX_GPIO_OBL1: + case NPCM7XX_GPIO_OBL2: + case NPCM7XX_GPIO_OBL3: + s->regs[reg] = value; + qemu_log_mask(LOG_UNIMP, "%s: Blinking is not implemented\n", + __func__); + break; + + case NPCM7XX_GPIO_SPLCK: + case NPCM7XX_GPIO_MPLCK: + qemu_log_mask(LOG_UNIMP, "%s: Per-pin lock is not implemented\n", + __func__); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" HWADDR_PRIx "\n", + DEVICE(s)->canonical_path, addr); + break; + } +} + +static const MemoryRegionOps npcm7xx_gpio_regs_ops = { + .read = npcm7xx_gpio_regs_read, + .write = npcm7xx_gpio_regs_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void npcm7xx_gpio_set_input(void *opaque, int line, int level) +{ + NPCM7xxGPIOState *s = opaque; + + trace_npcm7xx_gpio_set_input(DEVICE(s)->canonical_path, line, level); + + g_assert(line >= 0 && line < NPCM7XX_GPIO_NR_PINS); + + s->ext_driven = deposit32(s->ext_driven, line, 1, level >= 0); + s->ext_level = deposit32(s->ext_level, line, 1, level > 0); + + npcm7xx_gpio_update_pins(s, BIT(line)); +} + +static void npcm7xx_gpio_enter_reset(Object *obj, ResetType type) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + + memset(s->regs, 0, sizeof(s->regs)); + + s->regs[NPCM7XX_GPIO_PU] = s->reset_pu; + s->regs[NPCM7XX_GPIO_PD] = s->reset_pd; + s->regs[NPCM7XX_GPIO_OSRC] = s->reset_osrc; + s->regs[NPCM7XX_GPIO_ODSC] = s->reset_odsc; +} + +static void npcm7xx_gpio_hold_reset(Object *obj) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + + npcm7xx_gpio_update_pins(s, -1); +} + +static void npcm7xx_gpio_init(Object *obj) +{ + NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); + DeviceState *dev = DEVICE(obj); + + memory_region_init_io(&s->mmio, obj, &npcm7xx_gpio_regs_ops, s, + "regs", NPCM7XX_GPIO_REGS_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + qdev_init_gpio_in(dev, npcm7xx_gpio_set_input, NPCM7XX_GPIO_NR_PINS); + qdev_init_gpio_out(dev, s->output, NPCM7XX_GPIO_NR_PINS); +} + +static const VMStateDescription vmstate_npcm7xx_gpio = { + .name = "npcm7xx-gpio", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT32(pin_level, NPCM7xxGPIOState), + VMSTATE_UINT32(ext_level, NPCM7xxGPIOState), + VMSTATE_UINT32(ext_driven, NPCM7xxGPIOState), + VMSTATE_UINT32_ARRAY(regs, NPCM7xxGPIOState, NPCM7XX_GPIO_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + +static Property npcm7xx_gpio_properties[] = { + /* Bit n set => pin n has pullup enabled by default. */ + DEFINE_PROP_UINT32("reset-pullup", NPCM7xxGPIOState, reset_pu, 0), + /* Bit n set => pin n has pulldown enabled by default. */ + DEFINE_PROP_UINT32("reset-pulldown", NPCM7xxGPIOState, reset_pd, 0), + /* Bit n set => pin n has high slew rate by default. */ + DEFINE_PROP_UINT32("reset-osrc", NPCM7xxGPIOState, reset_osrc, 0), + /* Bit n set => pin n has high drive strength by default. */ + DEFINE_PROP_UINT32("reset-odsc", NPCM7xxGPIOState, reset_odsc, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void npcm7xx_gpio_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *reset = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + QEMU_BUILD_BUG_ON(NPCM7XX_GPIO_REGS_END > NPCM7XX_GPIO_NR_REGS); + + dc->desc = "NPCM7xx GPIO Controller"; + dc->vmsd = &vmstate_npcm7xx_gpio; + reset->phases.enter = npcm7xx_gpio_enter_reset; + reset->phases.hold = npcm7xx_gpio_hold_reset; + device_class_set_props(dc, npcm7xx_gpio_properties); +} + +static const TypeInfo npcm7xx_gpio_types[] = { + { + .name = TYPE_NPCM7XX_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCM7xxGPIOState), + .class_init = npcm7xx_gpio_class_init, + .instance_init = npcm7xx_gpio_init, + }, +}; +DEFINE_TYPES(npcm7xx_gpio_types); diff --git a/tests/qtest/npcm7xx_gpio-test.c b/tests/qtest/npcm7xx_gpio-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/npcm7xx_gpio-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Nuvoton NPCM7xx GPIO modules. + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +#define NR_GPIO_DEVICES (8) +#define GPIO(x) (0xf0010000 + (x) * 0x1000) +#define GPIO_IRQ(x) (116 + (x)) + +/* GPIO registers */ +#define GP_N_TLOCK1 0x00 +#define GP_N_DIN 0x04 /* Data IN */ +#define GP_N_POL 0x08 /* Polarity */ +#define GP_N_DOUT 0x0c /* Data OUT */ +#define GP_N_OE 0x10 /* Output Enable */ +#define GP_N_OTYP 0x14 +#define GP_N_MP 0x18 +#define GP_N_PU 0x1c /* Pull-up */ +#define GP_N_PD 0x20 /* Pull-down */ +#define GP_N_DBNC 0x24 /* Debounce */ +#define GP_N_EVTYP 0x28 /* Event Type */ +#define GP_N_EVBE 0x2c /* Event Both Edge */ +#define GP_N_OBL0 0x30 +#define GP_N_OBL1 0x34 +#define GP_N_OBL2 0x38 +#define GP_N_OBL3 0x3c +#define GP_N_EVEN 0x40 /* Event Enable */ +#define GP_N_EVENS 0x44 /* Event Set (enable) */ +#define GP_N_EVENC 0x48 /* Event Clear (disable) */ +#define GP_N_EVST 0x4c /* Event Status */ +#define GP_N_SPLCK 0x50 +#define GP_N_MPLCK 0x54 +#define GP_N_IEM 0x58 /* Input Enable */ +#define GP_N_OSRC 0x5c +#define GP_N_ODSC 0x60 +#define GP_N_DOS 0x68 /* Data OUT Set */ +#define GP_N_DOC 0x6c /* Data OUT Clear */ +#define GP_N_OES 0x70 /* Output Enable Set */ +#define GP_N_OEC 0x74 /* Output Enable Clear */ +#define GP_N_TLOCK2 0x7c + +static void gpio_unlock(int n) +{ + if (readl(GPIO(n) + GP_N_TLOCK1) != 0) { + writel(GPIO(n) + GP_N_TLOCK2, 0xc0de1248); + writel(GPIO(n) + GP_N_TLOCK1, 0xc0defa73); + } +} + +/* Restore the GPIO controller to a sensible default state. */ +static void gpio_reset(int n) +{ + gpio_unlock(0); + + writel(GPIO(n) + GP_N_EVEN, 0x00000000); + writel(GPIO(n) + GP_N_EVST, 0xffffffff); + writel(GPIO(n) + GP_N_POL, 0x00000000); + writel(GPIO(n) + GP_N_DOUT, 0x00000000); + writel(GPIO(n) + GP_N_OE, 0x00000000); + writel(GPIO(n) + GP_N_OTYP, 0x00000000); + writel(GPIO(n) + GP_N_PU, 0xffffffff); + writel(GPIO(n) + GP_N_PD, 0x00000000); + writel(GPIO(n) + GP_N_IEM, 0xffffffff); +} + +static void test_dout_to_din(void) +{ + gpio_reset(0); + + /* When output is enabled, DOUT should be reflected on DIN. */ + writel(GPIO(0) + GP_N_OE, 0xffffffff); + /* PU and PD shouldn't have any impact on DIN. */ + writel(GPIO(0) + GP_N_PU, 0xffff0000); + writel(GPIO(0) + GP_N_PD, 0x0000ffff); + writel(GPIO(0) + GP_N_DOUT, 0x12345678); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x12345678); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x12345678); +} + +static void test_pullup_pulldown(void) +{ + gpio_reset(0); + + /* + * When output is disabled, and PD is the inverse of PU, PU should be + * reflected on DIN. If PD is not the inverse of PU, the state of DIN is + * undefined, so we don't test that. + */ + writel(GPIO(0) + GP_N_OE, 0x00000000); + /* DOUT shouldn't have any impact on DIN. */ + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_PU, 0x23456789); + writel(GPIO(0) + GP_N_PD, ~0x23456789U); + g_assert_cmphex(readl(GPIO(0) + GP_N_PU), ==, 0x23456789); + g_assert_cmphex(readl(GPIO(0) + GP_N_PD), ==, ~0x23456789U); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x23456789); +} + +static void test_output_enable(void) +{ + gpio_reset(0); + + /* + * With all pins weakly pulled down, and DOUT all-ones, OE should be + * reflected on DIN. + */ + writel(GPIO(0) + GP_N_DOUT, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0x00000000); + writel(GPIO(0) + GP_N_PD, 0xffffffff); + writel(GPIO(0) + GP_N_OE, 0x3456789a); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x3456789a); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x3456789a); + + writel(GPIO(0) + GP_N_OEC, 0x00030002); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x34547898); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x34547898); + + writel(GPIO(0) + GP_N_OES, 0x0000f001); + g_assert_cmphex(readl(GPIO(0) + GP_N_OE), ==, 0x3454f899); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x3454f899); +} + +static void test_open_drain(void) +{ + gpio_reset(0); + + /* + * Upper half of DOUT drives a 1 only if the corresponding bit in OTYP is + * not set. If OTYP is set, DIN is determined by PU/PD. Lower half of + * DOUT always drives a 0 regardless of OTYP; PU/PD have no effect. When + * OE is 0, output is determined by PU/PD; OTYP has no effect. + */ + writel(GPIO(0) + GP_N_OTYP, 0x456789ab); + writel(GPIO(0) + GP_N_OE, 0xf0f0f0f0); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_PU, 0xff00ff00); + writel(GPIO(0) + GP_N_PD, 0x00ff00ff); + g_assert_cmphex(readl(GPIO(0) + GP_N_OTYP), ==, 0x456789ab); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff900f00); +} + +static void test_polarity(void) +{ + gpio_reset(0); + + /* + * In push-pull mode, DIN should reflect DOUT because the signal is + * inverted in both directions. + */ + writel(GPIO(0) + GP_N_OTYP, 0x00000000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0x56789abc); + writel(GPIO(0) + GP_N_POL, 0x6789abcd); + g_assert_cmphex(readl(GPIO(0) + GP_N_POL), ==, 0x6789abcd); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0x56789abc); + + /* + * When turning off the drivers, DIN should reflect the inverse of the + * pulled-up lines. + */ + writel(GPIO(0) + GP_N_OE, 0x00000000); + writel(GPIO(0) + GP_N_POL, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0x789abcde); + writel(GPIO(0) + GP_N_PD, ~0x789abcdeU); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, ~0x789abcdeU); + + /* + * In open-drain mode, DOUT=1 will appear to drive the pin high (since DIN + * is inverted), while DOUT=0 will leave the pin floating. + */ + writel(GPIO(0) + GP_N_OTYP, 0xffffffff); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_PU, 0xffff0000); + writel(GPIO(0) + GP_N_PD, 0x0000ffff); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff00ffff); +} + +static void test_input_mask(void) +{ + gpio_reset(0); + + /* IEM=0 forces the input to zero before polarity inversion. */ + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + writel(GPIO(0) + GP_N_POL, 0xffff0000); + writel(GPIO(0) + GP_N_IEM, 0x87654321); + g_assert_cmphex(readl(GPIO(0) + GP_N_DIN), ==, 0xff9a4300); +} + +static void test_temp_lock(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + + /* Make sure we're unlocked initially. */ + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + /* Writing any value to TLOCK1 will lock. */ + writel(GPIO(0) + GP_N_TLOCK1, 0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 1); + writel(GPIO(0) + GP_N_DOUT, 0xa9876543); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x98765432); + /* Now, try to unlock. */ + gpio_unlock(0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + writel(GPIO(0) + GP_N_DOUT, 0xa9876543); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0xa9876543); + + /* Try it again, but write TLOCK2 to lock. */ + writel(GPIO(0) + GP_N_TLOCK2, 0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 1); + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0xa9876543); + /* Now, try to unlock. */ + gpio_unlock(0); + g_assert_cmphex(readl(GPIO(0) + GP_N_TLOCK1), ==, 0); + writel(GPIO(0) + GP_N_DOUT, 0x98765432); + g_assert_cmphex(readl(GPIO(0) + GP_N_DOUT), ==, 0x98765432); +} + +static void test_events_level(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0x00000000); + writel(GPIO(0) + GP_N_DOUT, 0xba987654); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba987654); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0x00000000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba987654); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x00007654); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0xba980000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0xba980000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_events_rising_edge(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0xffffffff); + writel(GPIO(0) + GP_N_EVBE, 0x00000000); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x0000ff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0x00ff0000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ffff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x0000f000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ff0f00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x00ff0f00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_events_both_edges(void) +{ + gpio_reset(0); + + writel(GPIO(0) + GP_N_EVTYP, 0xffffffff); + writel(GPIO(0) + GP_N_EVBE, 0xffffffff); + writel(GPIO(0) + GP_N_DOUT, 0xffff0000); + writel(GPIO(0) + GP_N_OE, 0xffffffff); + writel(GPIO(0) + GP_N_EVST, 0xffffffff); + + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xff00ff00); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00ffff00); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_DOUT, 0xef00ff08); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x10ffff08); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x0000f000); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x10ff0f08); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); + writel(GPIO(0) + GP_N_EVST, 0x10ff0f08); + g_assert_cmphex(readl(GPIO(0) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(0))); +} + +static void test_gpion_irq(gconstpointer test_data) +{ + intptr_t n = (intptr_t)test_data; + + gpio_reset(n); + + writel(GPIO(n) + GP_N_EVTYP, 0x00000000); + writel(GPIO(n) + GP_N_DOUT, 0x00000000); + writel(GPIO(n) + GP_N_OE, 0xffffffff); + writel(GPIO(n) + GP_N_EVST, 0xffffffff); + writel(GPIO(n) + GP_N_EVEN, 0x00000000); + + /* Trigger an event; interrupts are masked. */ + g_assert_cmphex(readl(GPIO(n) + GP_N_EVST), ==, 0x00000000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_DOS, 0x00008000); + g_assert_cmphex(readl(GPIO(n) + GP_N_EVST), ==, 0x00008000); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Unmask all event interrupts; verify that the interrupt fired. */ + writel(GPIO(n) + GP_N_EVEN, 0xffffffff); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Clear the current bit, set a new bit, irq stays asserted. */ + writel(GPIO(n) + GP_N_DOC, 0x00008000); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_DOS, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVST, 0x00008000); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Mask/unmask the event that's currently active. */ + writel(GPIO(n) + GP_N_EVENC, 0x00000200); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVENS, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + + /* Clear the input and the status bit, irq is deasserted. */ + writel(GPIO(n) + GP_N_DOC, 0x00000200); + g_assert_true(qtest_get_irq(global_qtest, GPIO_IRQ(n))); + writel(GPIO(n) + GP_N_EVST, 0x00000200); + g_assert_false(qtest_get_irq(global_qtest, GPIO_IRQ(n))); +} + +int main(int argc, char **argv) +{ + int ret; + int i; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("/npcm7xx_gpio/dout_to_din", test_dout_to_din); + qtest_add_func("/npcm7xx_gpio/pullup_pulldown", test_pullup_pulldown); + qtest_add_func("/npcm7xx_gpio/output_enable", test_output_enable); + qtest_add_func("/npcm7xx_gpio/open_drain", test_open_drain); + qtest_add_func("/npcm7xx_gpio/polarity", test_polarity); + qtest_add_func("/npcm7xx_gpio/input_mask", test_input_mask); + qtest_add_func("/npcm7xx_gpio/temp_lock", test_temp_lock); + qtest_add_func("/npcm7xx_gpio/events/level", test_events_level); + qtest_add_func("/npcm7xx_gpio/events/rising_edge", test_events_rising_edge); + qtest_add_func("/npcm7xx_gpio/events/both_edges", test_events_both_edges); + + for (i = 0; i < NR_GPIO_DEVICES; i++) { + g_autofree char *test_name = + g_strdup_printf("/npcm7xx_gpio/gpio[%d]/irq", i); + qtest_add_data_func(test_name, (void *)(intptr_t)i, test_gpion_irq); + } + + qtest_start("-machine npcm750-evb"); + qtest_irq_intercept_in(global_qtest, "/machine/soc/a9mpcore/gic"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) softmmu_ss.add(when: 'CONFIG_ZAURUS', if_true: files('zaurus.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('imx_gpio.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_gpio.c')) softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_gpio.c')) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_gpio.c')) softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_gpio.c')) diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# npcm7xx_gpio.c +npcm7xx_gpio_read(const char *id, uint64_t offset, uint64_t value) " %s offset: 0x%04" PRIx64 " value 0x%08" PRIx64 +npcm7xx_gpio_write(const char *id, uint64_t offset, uint64_t value) "%s offset: 0x%04" PRIx64 " value 0x%08" PRIx64 +npcm7xx_gpio_set_input(const char *id, int32_t line, int32_t level) "%s line: %" PRIi32 " level: %" PRIi32 +npcm7xx_gpio_set_output(const char *id, int32_t line, int32_t level) "%s line: %" PRIi32 " level: %" PRIi32 +npcm7xx_gpio_update_events(const char *id, uint32_t evst, uint32_t even) "%s evst: 0x%08" PRIx32 " even: 0x%08" PRIx32 + # nrf51_gpio.c nrf51_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64 nrf51_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64 diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \ ['prom-env-test', 'boot-serial-test'] qtests_npcm7xx = \ - ['npcm7xx_rng-test', + ['npcm7xx_gpio-test', + 'npcm7xx_rng-test', 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ -- 2.20.1 From: Zenghui Yu <yuzenghui@huawei.com> Ensure the vSMMUv3 will be restored before all PCIe devices so that DMA translation can work properly during migration. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20201019091508.197-1-yuzenghui@huawei.com Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, .minimum_version_id = 1, + .priority = MIG_PRI_IOMMU, .fields = (VMStateField[]) { VMSTATE_UINT32(features, SMMUv3State), VMSTATE_UINT8(sid_size, SMMUv3State), -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> No code out of bcm2836.c uses (or requires) the BCM283XInfo declarations. Move it locally to the C source file. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2836.h | 8 -------- hw/arm/bcm2836.c | 14 ++++++++++++++ 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ struct BCM283XState { BCM2835PeripheralState peripherals; }; -typedef struct BCM283XInfo BCM283XInfo; - -struct BCM283XClass { - DeviceClass parent_class; - const BCM283XInfo *info; -}; - - #endif /* BCM2836_H */ diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" +typedef struct BCM283XInfo BCM283XInfo; + +typedef struct BCM283XClass { + /*< private >*/ + DeviceClass parent_class; + /*< public >*/ + const BCM283XInfo *info; +} BCM283XClass; + struct BCM283XInfo { const char *name; const char *cpu_type; @@ -XXX,XX +XXX,XX @@ struct BCM283XInfo { int clusterid; }; +#define BCM283X_CLASS(klass) \ + OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) +#define BCM283X_GET_CLASS(obj) \ + OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) + static const BCM283XInfo bcm283x_socs[] = { { .name = TYPE_BCM2836, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Remove usage of TypeInfo::class_data. Instead fill the fields in the corresponding class_init(). So far all children use the same values for almost all fields, but we are going to add the BCM2711/BCM2838 SoC for the raspi4 machine which use different fields. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 108 ++++++++++++++++++++++------------------------- 1 file changed, 51 insertions(+), 57 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" -typedef struct BCM283XInfo BCM283XInfo; - typedef struct BCM283XClass { /*< private >*/ DeviceClass parent_class; /*< public >*/ - const BCM283XInfo *info; -} BCM283XClass; - -struct BCM283XInfo { const char *name; const char *cpu_type; hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; -}; +} BCM283XClass; #define BCM283X_CLASS(klass) \ OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) #define BCM283X_GET_CLASS(obj) \ OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) -static const BCM283XInfo bcm283x_socs[] = { - { - .name = TYPE_BCM2836, - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"), - .peri_base = 0x3f000000, - .ctrl_base = 0x40000000, - .clusterid = 0xf, - }, -#ifdef TARGET_AARCH64 - { - .name = TYPE_BCM2837, - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"), - .peri_base = 0x3f000000, - .ctrl_base = 0x40000000, - .clusterid = 0x0, - }, -#endif -}; - static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); BCM283XClass *bc = BCM283X_GET_CLASS(obj); - const BCM283XInfo *info = bc->info; int n; for (n = 0; n < BCM283X_NCPUS; n++) { object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, - info->cpu_type); + bc->cpu_type); } object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); BCM283XClass *bc = BCM283X_GET_CLASS(dev); - const BCM283XInfo *info = bc->info; Object *obj; int n; @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) "sd-bus"); sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0, - info->peri_base, 1); + bc->peri_base, 1); /* bcm2836 interrupt controller (and mailboxes, etc.) */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->control), errp)) { return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, info->ctrl_base); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, bc->ctrl_base); sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0, qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0)); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) for (n = 0; n < BCM283X_NCPUS; n++) { /* TODO: this should be converted to a property of ARM_CPU */ - s->cpu[n].core.mp_affinity = (info->clusterid << 8) | n; + s->cpu[n].core.mp_affinity = (bc->clusterid << 8) | n; /* set periphbase/CBAR value for CPU-local registers */ if (!object_property_set_int(OBJECT(&s->cpu[n].core), "reset-cbar", - info->peri_base, errp)) { + bc->peri_base, errp)) { return; } @@ -XXX,XX +XXX,XX @@ static Property bcm2836_props[] = { static void bcm283x_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); - BCM283XClass *bc = BCM283X_CLASS(oc); - bc->info = data; - dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); /* Reason: Must be wired up in code (see raspi_init() function) */ dc->user_creatable = false; } -static const TypeInfo bcm283x_type_info = { - .name = TYPE_BCM283X, - .parent = TYPE_DEVICE, - .instance_size = sizeof(BCM283XState), - .instance_init = bcm2836_init, - .class_size = sizeof(BCM283XClass), - .abstract = true, +static void bcm2836_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); + + bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + bc->peri_base = 0x3f000000; + bc->ctrl_base = 0x40000000; + bc->clusterid = 0xf; + dc->realize = bcm2836_realize; + device_class_set_props(dc, bcm2836_props); }; -static void bcm2836_register_types(void) +#ifdef TARGET_AARCH64 +static void bcm2837_class_init(ObjectClass *oc, void *data) { - int i; + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); - type_register_static(&bcm283x_type_info); - for (i = 0; i < ARRAY_SIZE(bcm283x_socs); i++) { - TypeInfo ti = { - .name = bcm283x_socs[i].name, - .parent = TYPE_BCM283X, - .class_init = bcm283x_class_init, - .class_data = (void *) &bcm283x_socs[i], - }; - type_register(&ti); + bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); + bc->peri_base = 0x3f000000; + bc->ctrl_base = 0x40000000; + bc->clusterid = 0x0; + dc->realize = bcm2836_realize; + device_class_set_props(dc, bcm2836_props); +}; +#endif + +static const TypeInfo bcm283x_types[] = { + { + .name = TYPE_BCM2836, + .parent = TYPE_BCM283X, + .class_init = bcm2836_class_init, +#ifdef TARGET_AARCH64 + }, { + .name = TYPE_BCM2837, + .parent = TYPE_BCM283X, + .class_init = bcm2837_class_init, +#endif + }, { + .name = TYPE_BCM283X, + .parent = TYPE_DEVICE, + .instance_size = sizeof(BCM283XState), + .instance_init = bcm2836_init, + .class_size = sizeof(BCM283XClass), + .class_init = bcm283x_class_init, + .abstract = true, } -} +}; -type_init(bcm2836_register_types) +DEFINE_TYPES(bcm283x_types) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The BCM2835 has only one core. Introduce the core_count field to be able to use values different than BCM283X_NCPUS (4). Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { /*< public >*/ const char *name; const char *cpu_type; + unsigned core_count; hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) BCM283XClass *bc = BCM283X_GET_CLASS(obj); int n; - for (n = 0; n < BCM283X_NCPUS; n++) { + for (n = 0; n < bc->core_count; n++) { object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, bc->cpu_type); } @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) BCM283XClass *bc = BCM283X_CLASS(oc); bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + bc->core_count = BCM283X_NCPUS; bc->peri_base = 0x3f000000; bc->ctrl_base = 0x40000000; bc->clusterid = 0xf; @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) BCM283XClass *bc = BCM283X_CLASS(oc); bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); + bc->core_count = BCM283X_NCPUS; bc->peri_base = 0x3f000000; bc->ctrl_base = 0x40000000; bc->clusterid = 0x0; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> It makes no sense to set enabled-cpus=0 on single core SoCs. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { #define BCM283X_GET_CLASS(obj) \ OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) +static Property bcm2836_enabled_cores_property = + DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0); + static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) object_initialize_child(obj, "cpu[*]", &s->cpu[n].core, bc->cpu_type); } + if (bc->core_count > 1) { + qdev_property_add_static(DEVICE(obj), &bcm2836_enabled_cores_property); + qdev_prop_set_uint32(DEVICE(obj), "enabled-cpus", bc->core_count); + } object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) } } -static Property bcm2836_props[] = { - DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, - BCM283X_NCPUS), - DEFINE_PROP_END_OF_LIST() -}; - static void bcm283x_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) bc->ctrl_base = 0x40000000; bc->clusterid = 0xf; dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); }; #ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) bc->ctrl_base = 0x40000000; bc->clusterid = 0x0; dc->realize = bcm2836_realize; - device_class_set_props(dc, bcm2836_props); }; #endif -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The realize() function is clearly composed of two parts, each described by a comment: void realize() { /* common peripherals from bcm2835 */ ... /* bcm2836 interrupt controller (and mailboxes, etc.) */ ... } Split the two part, so we can reuse the common part with other SoCs from this family. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) qdev_prop_set_uint32(DEVICE(obj), "enabled-cpus", bc->core_count); } - object_initialize_child(obj, "control", &s->control, TYPE_BCM2836_CONTROL); + if (bc->ctrl_base) { + object_initialize_child(obj, "control", &s->control, + TYPE_BCM2836_CONTROL); + } object_initialize_child(obj, "peripherals", &s->peripherals, TYPE_BCM2835_PERIPHERALS); @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) "vcram-size"); } -static void bcm2836_realize(DeviceState *dev, Error **errp) +static bool bcm283x_common_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); BCM283XClass *bc = BCM283X_GET_CLASS(dev); Object *obj; - int n; /* common peripherals from bcm2835 */ @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) object_property_add_const_link(OBJECT(&s->peripherals), "ram", obj); if (!sysbus_realize(SYS_BUS_DEVICE(&s->peripherals), errp)) { - return; + return false; } object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->peripherals), @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0, bc->peri_base, 1); + return true; +} + +static void bcm2836_realize(DeviceState *dev, Error **errp) +{ + BCM283XState *s = BCM283X(dev); + BCM283XClass *bc = BCM283X_GET_CLASS(dev); + int n; + + if (!bcm283x_common_realize(dev, errp)) { + return; + } /* bcm2836 interrupt controller (and mailboxes, etc.) */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->control), errp)) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-7-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2836.h | 1 + hw/arm/bcm2836.c | 34 ++++++++++++++++++++++++++++++++++ hw/arm/raspi.c | 2 ++ 3 files changed, 37 insertions(+) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) * them, code using these devices should always handle them via the * BCM283x base class, so they have no BCM2836(obj) etc macros. */ +#define TYPE_BCM2835 "bcm2835" #define TYPE_BCM2836 "bcm2836" #define TYPE_BCM2837 "bcm2837" diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static bool bcm283x_common_realize(DeviceState *dev, Error **errp) return true; } +static void bcm2835_realize(DeviceState *dev, Error **errp) +{ + BCM283XState *s = BCM283X(dev); + + if (!bcm283x_common_realize(dev, errp)) { + return; + } + + if (!qdev_realize(DEVICE(&s->cpu[0].core), NULL, errp)) { + return; + } + + /* Connect irq/fiq outputs from the interrupt controller. */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0, + qdev_get_gpio_in(DEVICE(&s->cpu[0].core), ARM_CPU_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1, + qdev_get_gpio_in(DEVICE(&s->cpu[0].core), ARM_CPU_FIQ)); +} + static void bcm2836_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); @@ -XXX,XX +XXX,XX @@ static void bcm283x_class_init(ObjectClass *oc, void *data) dc->user_creatable = false; } +static void bcm2835_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); + + bc->cpu_type = ARM_CPU_TYPE_NAME("arm1176"); + bc->core_count = 1; + bc->peri_base = 0x20000000; + dc->realize = bcm2835_realize; +}; + static void bcm2836_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void bcm2837_class_init(ObjectClass *oc, void *data) static const TypeInfo bcm283x_types[] = { { + .name = TYPE_BCM2835, + .parent = TYPE_BCM283X, + .class_init = bcm2835_class_init, + }, { .name = TYPE_BCM2836, .parent = TYPE_BCM283X, .class_init = bcm2836_class_init, diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ FIELD(REV_CODE, MEMORY_SIZE, 20, 3); FIELD(REV_CODE, STYLE, 23, 1); typedef enum RaspiProcessorId { + PROCESSOR_ID_BCM2835 = 0, PROCESSOR_ID_BCM2836 = 1, PROCESSOR_ID_BCM2837 = 2, } RaspiProcessorId; @@ -XXX,XX +XXX,XX @@ static const struct { const char *type; int cores_count; } soc_property[] = { + [PROCESSOR_ID_BCM2835] = {TYPE_BCM2835, 1}, [PROCESSOR_ID_BCM2836] = {TYPE_BCM2836, BCM283X_NCPUS}, [PROCESSOR_ID_BCM2837] = {TYPE_BCM2837, BCM283X_NCPUS}, }; -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Pi A is almost the first machine released. It uses a BCM2835 SoC which includes a ARMv6Z core. Example booting the machine using content from [*] (we use the device tree from the B model): $ qemu-system-arm -M raspi1ap -serial stdio \ -kernel raspberrypi/firmware/boot/kernel.img \ -dtb raspberrypi/firmware/boot/bcm2708-rpi-b-plus.dtb \ -append 'earlycon=pl011,0x20201000 console=ttyAMA0' [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B+ ... [*] http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20200512-2_armhf.deb Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_machine_class_common_init(MachineClass *mc, mc->default_ram_id = "ram"; }; +static void raspi1ap_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x900021; /* Revision 1.1 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi2b_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void raspi3b_machine_class_init(ObjectClass *oc, void *data) static const TypeInfo raspi_machine_types[] = { { + .name = MACHINE_TYPE_NAME("raspi1ap"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi1ap_machine_class_init, + }, { .name = MACHINE_TYPE_NAME("raspi2b"), .parent = TYPE_RASPI_MACHINE, .class_init = raspi2b_machine_class_init, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Similarly to the Pi A, the Pi Zero uses a BCM2835 SoC (ARMv6Z core). The only difference between the revision 1.2 and 1.3 is the latter exposes a CSI camera connector. As we do not implement the Unicam peripheral, there is no point in exposing a camera connector :) Therefore we choose to model the 1.2 revision. Example booting the machine using content from [*]: $ qemu-system-arm -M raspi0 -serial stdio \ -kernel raspberrypi/firmware/boot/kernel.img \ -dtb raspberrypi/firmware/boot/bcm2708-rpi-zero.dtb \ -append 'printk.time=0 earlycon=pl011,0x20201000 console=ttyAMA0' [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero ... [*] http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20200512-2_armhf.deb Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-9-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_machine_class_common_init(MachineClass *mc, mc->default_ram_id = "ram"; }; +static void raspi0_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x920092; /* Revision 1.2 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi1ap_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void raspi3b_machine_class_init(ObjectClass *oc, void *data) static const TypeInfo raspi_machine_types[] = { { + .name = MACHINE_TYPE_NAME("raspi0"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi0_machine_class_init, + }, { .name = MACHINE_TYPE_NAME("raspi1ap"), .parent = TYPE_RASPI_MACHINE, .class_init = raspi1ap_machine_class_init, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Pi 3A+ is a stripped down version of the 3B: - 512 MiB of RAM instead of 1 GiB - no on-board ethernet chipset Add it as it is a closer match to what we model. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi2b_machine_class_init(ObjectClass *oc, void *data) }; #ifdef TARGET_AARCH64 +static void raspi3ap_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc); + + rmc->board_rev = 0x9020e0; /* Revision 1.0 */ + raspi_machine_class_common_init(mc, rmc->board_rev); +}; + static void raspi3b_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const TypeInfo raspi_machine_types[] = { .parent = TYPE_RASPI_MACHINE, .class_init = raspi2b_machine_class_init, #ifdef TARGET_AARCH64 + }, { + .name = MACHINE_TYPE_NAME("raspi3ap"), + .parent = TYPE_RASPI_MACHINE, + .class_init = raspi3ap_machine_class_init, }, { .name = MACHINE_TYPE_NAME("raspi3b"), .parent = TYPE_RASPI_MACHINE, -- 2.20.1 From: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Use of 0x%d - make up our mind as 0x%x Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Eric Auger <eric.auger@redhat.com> Message-id: 20201014193355.53074-1-dgilbert@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/trace-events | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/trace-events b/hw/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/trace-events +++ b/hw/arm/trace-events @@ -XXX,XX +XXX,XX @@ smmuv3_get_cd(uint64_t addr) "CD addr: 0x%"PRIx64 smmuv3_decode_cd(uint32_t oas) "oas=%d" smmuv3_decode_cd_tt(int i, uint32_t tsz, uint64_t ttb, uint32_t granule_sz, bool had) "TT[%d]:tsz:%d ttb:0x%"PRIx64" granule_sz:%d had:%d" smmuv3_cmdq_cfgi_ste(int streamid) "streamid =%d" -smmuv3_cmdq_cfgi_ste_range(int start, int end) "start=0x%d - end=0x%d" +smmuv3_cmdq_cfgi_ste_range(int start, int end) "start=0x%x - end=0x%x" smmuv3_cmdq_cfgi_cd(uint32_t sid) "streamid = %d" smmuv3_config_cache_hit(uint32_t sid, uint32_t hits, uint32_t misses, uint32_t perc) "Config cache HIT for sid %d (hits=%d, misses=%d, hit rate=%d)" smmuv3_config_cache_miss(uint32_t sid, uint32_t hits, uint32_t misses, uint32_t perc) "Config cache MISS for sid %d (hits=%d, misses=%d, hit rate=%d)" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/clock.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ extern const VMStateDescription vmstate_clock; VMSTATE_CLOCK_V(field, state, 0) #define VMSTATE_CLOCK_V(field, state, version) \ VMSTATE_STRUCT_POINTER_V(field, state, version, vmstate_clock, Clock) +#define VMSTATE_ARRAY_CLOCK(field, state, num) \ + VMSTATE_ARRAY_CLOCK_V(field, state, num, 0) +#define VMSTATE_ARRAY_CLOCK_V(field, state, num, version) \ + VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(field, state, num, version, \ + vmstate_clock, Clock) /** * clock_setup_canonical_path: -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The nanosecond unit greatly limits the dynamic range we can display in clock value traces, for values in the order of 1GHz and more. The internal representation can go way beyond this value and it is quite common for today's clocks to be within those ranges. For example, a frequency between 500MHz+ and 1GHz will be displayed as 1ns. Beyond 1GHz, it will show up as 0ns. Replace nanosecond periods traces with frequencies in the Hz unit to have more dynamic range in the trace output. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/clock.c | 6 +++--- hw/core/trace-events | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/hw/core/clock.c b/hw/core/clock.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/clock.c +++ b/hw/core/clock.c @@ -XXX,XX +XXX,XX @@ bool clock_set(Clock *clk, uint64_t period) if (clk->period == period) { return false; } - trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_NS(clk->period), - CLOCK_PERIOD_TO_NS(period)); + trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_HZ(clk->period), + CLOCK_PERIOD_TO_HZ(period)); clk->period = period; return true; @@ -XXX,XX +XXX,XX @@ static void clock_propagate_period(Clock *clk, bool call_callbacks) if (child->period != clk->period) { child->period = clk->period; trace_clock_update(CLOCK_PATH(child), CLOCK_PATH(clk), - CLOCK_PERIOD_TO_NS(clk->period), + CLOCK_PERIOD_TO_HZ(clk->period), call_callbacks); if (call_callbacks && child->callback) { child->callback(child->callback_opaque); diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ resettable_transitional_function(void *obj, const char *objtype) "obj=%p(%s)" # clock.c clock_set_source(const char *clk, const char *src) "'%s', src='%s'" clock_disconnect(const char *clk) "'%s'" -clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', ns=%"PRIu64"->%"PRIu64 +clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', %"PRIu64"Hz->%"PRIu64"Hz" clock_propagate(const char *clk) "'%s'" -clock_update(const char *clk, const char *src, uint64_t val, int cb) "'%s', src='%s', ns=%"PRIu64", cb=%d" +clock_update(const char *clk, const char *src, uint64_t hz, int cb) "'%s', src='%s', val=%"PRIu64"Hz cb=%d" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The CPRMAN (clock controller) was mapped at the watchdog/power manager address. It was also split into two unimplemented peripherals (CM and A2W) but this is really the same one, as shown by this extract of the Raspberry Pi 3 Linux device tree: watchdog@7e100000 { compatible = "brcm,bcm2835-pm\0brcm,bcm2835-pm-wdt"; [...] reg = <0x7e100000 0x114 0x7e00a000 0x24>; [...] }; [...] cprman@7e101000 { compatible = "brcm,bcm2835-cprman"; [...] reg = <0x7e101000 0x2000>; [...] }; Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 2 +- include/hw/arm/raspi_platform.h | 5 ++--- hw/arm/bcm2835_peripherals.c | 4 ++-- 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ struct BCM2835PeripheralState { BCM2835MphiState mphi; UnimplementedDeviceState txp; UnimplementedDeviceState armtmr; + UnimplementedDeviceState powermgt; UnimplementedDeviceState cprman; - UnimplementedDeviceState a2w; PL011State uart0; BCM2835AuxState aux; BCM2835FBState fb; diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/raspi_platform.h +++ b/include/hw/arm/raspi_platform.h @@ -XXX,XX +XXX,XX @@ #define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 (SP804) */ #define ARMCTRL_0_SBM_OFFSET (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores * Doorbells & Mailboxes */ -#define CPRMAN_OFFSET 0x100000 /* Power Management, Watchdog */ -#define CM_OFFSET 0x101000 /* Clock Management */ -#define A2W_OFFSET 0x102000 /* Reset controller */ +#define PM_OFFSET 0x100000 /* Power Management */ +#define CPRMAN_OFFSET 0x101000 /* Clock Management */ #define AVS_OFFSET 0x103000 /* Audio Video Standard */ #define RNG_OFFSET 0x104000 #define GPIO_OFFSET 0x200000 diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000); create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); - create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); - create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); + create_unimp(s, &s->powermgt, "bcm2835-powermgt", PM_OFFSET, 0x114); + create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x2000); create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100); create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100); create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a main oscillator, and several sub-components (PLLs, multiplexers, ...) to generate the BCM2835 clock tree. This commit adds a skeleton of the CPRMAN, with a dummy register read/write implementation. It embeds the main oscillator (xosc) from which all the clocks will be derived. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 3 +- include/hw/misc/bcm2835_cprman.h | 37 +++++ include/hw/misc/bcm2835_cprman_internals.h | 24 +++ hw/arm/bcm2835_peripherals.c | 11 +- hw/misc/bcm2835_cprman.c | 163 +++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 5 + 7 files changed, 242 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/bcm2835_cprman.h create mode 100644 include/hw/misc/bcm2835_cprman_internals.h create mode 100644 hw/misc/bcm2835_cprman.c diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_mbox.h" #include "hw/misc/bcm2835_mphi.h" #include "hw/misc/bcm2835_thermal.h" +#include "hw/misc/bcm2835_cprman.h" #include "hw/sd/sdhci.h" #include "hw/sd/bcm2835_sdhost.h" #include "hw/gpio/bcm2835_gpio.h" @@ -XXX,XX +XXX,XX @@ struct BCM2835PeripheralState { UnimplementedDeviceState txp; UnimplementedDeviceState armtmr; UnimplementedDeviceState powermgt; - UnimplementedDeviceState cprman; + BCM2835CprmanState cprman; PL011State uart0; BCM2835AuxState aux; BCM2835FBState fb; diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_CPRMAN_H +#define HW_MISC_CPRMAN_H + +#include "hw/sysbus.h" +#include "hw/qdev-clock.h" + +#define TYPE_BCM2835_CPRMAN "bcm2835-cprman" + +typedef struct BCM2835CprmanState BCM2835CprmanState; + +DECLARE_INSTANCE_CHECKER(BCM2835CprmanState, CPRMAN, + TYPE_BCM2835_CPRMAN) + +#define CPRMAN_NUM_REGS (0x2000 / sizeof(uint32_t)) + +struct BCM2835CprmanState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t regs[CPRMAN_NUM_REGS]; + uint32_t xosc_freq; + + Clock *xosc; +}; + +#endif diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_CPRMAN_INTERNALS_H +#define HW_MISC_CPRMAN_INTERNALS_H + +#include "hw/registerfields.h" +#include "hw/misc/bcm2835_cprman.h" + +/* Register map */ + +/* + * This field is common to all registers. Each register write value must match + * the CPRMAN_PASSWORD magic value in its 8 MSB. + */ +FIELD(CPRMAN, PASSWORD, 24, 8) +#define CPRMAN_PASSWORD 0x5a + +#endif diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) /* DWC2 */ object_initialize_child(obj, "dwc2", &s->dwc2, TYPE_DWC2_USB); + /* CPRMAN clock manager */ + object_initialize_child(obj, "cprman", &s->cprman, TYPE_BCM2835_CPRMAN); + object_property_add_const_link(OBJECT(&s->dwc2), "dma-mr", OBJECT(&s->gpu_bus_mr)); } @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) return; } + /* CPRMAN clock manager */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->cprman), errp)) { + return; + } + memory_region_add_subregion(&s->peri_mr, CPRMAN_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cprman), 0)); + memory_region_add_subregion(&s->peri_mr, ARMCTRL_IC_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ic), 0)); sysbus_pass_irq(SYS_BUS_DEVICE(s), SYS_BUS_DEVICE(&s->ic)); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000); create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->powermgt, "bcm2835-powermgt", PM_OFFSET, 0x114); - create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x2000); create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100); create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100); create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20); diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 CPRMAN clock manager + * + * Copyright (c) 2020 Luc Michel <luc@lmichel.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * This peripheral is roughly divided into 3 main parts: + * - the PLLs + * - the PLL channels + * - the clock muxes + * + * A main oscillator (xosc) feeds all the PLLs. Each PLLs has one or more + * channels. Those channel are then connected to the clock muxes. Each mux has + * multiples sources (usually the xosc, some of the PLL channels and some "test + * debug" clocks). A mux is configured to select a given source through its + * control register. Each mux has one output clock that also goes out of the + * CPRMAN. This output clock usually connects to another peripheral in the SoC + * (so a given mux is dedicated to a peripheral). + * + * At each level (PLL, channel and mux), the clock can be altered through + * dividers (and multipliers in case of the PLLs), and can be disabled (in this + * case, the next levels see no clock). + * + * This can be sum-up as follows (this is an example and not the actual BCM2835 + * clock tree): + * + * /-->[PLL]-|->[PLL channel]--... [mux]--> to peripherals + * | |->[PLL channel] muxes takes [mux] + * | \->[PLL channel] inputs from [mux] + * | some channels [mux] + * [xosc]---|-->[PLL]-|->[PLL channel] and other srcs [mux] + * | \->[PLL channel] ...-->[mux] + * | [mux] + * \-->[PLL]--->[PLL channel] [mux] + * + * The page at https://elinux.org/The_Undocumented_Pi gives the actual clock + * tree configuration. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "hw/misc/bcm2835_cprman.h" +#include "hw/misc/bcm2835_cprman_internals.h" +#include "trace.h" + +/* CPRMAN "top level" model */ + +static uint64_t cprman_read(void *opaque, hwaddr offset, + unsigned size) +{ + BCM2835CprmanState *s = CPRMAN(opaque); + uint64_t r = 0; + size_t idx = offset / sizeof(uint32_t); + + switch (idx) { + default: + r = s->regs[idx]; + } + + trace_bcm2835_cprman_read(offset, r); + return r; +} + +static void cprman_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + BCM2835CprmanState *s = CPRMAN(opaque); + size_t idx = offset / sizeof(uint32_t); + + if (FIELD_EX32(value, CPRMAN, PASSWORD) != CPRMAN_PASSWORD) { + trace_bcm2835_cprman_write_invalid_magic(offset, value); + return; + } + + value &= ~R_CPRMAN_PASSWORD_MASK; + + trace_bcm2835_cprman_write(offset, value); + s->regs[idx] = value; + +} + +static const MemoryRegionOps cprman_ops = { + .read = cprman_read, + .write = cprman_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + /* + * Although this hasn't been checked against real hardware, nor the + * information can be found in a datasheet, it seems reasonable because + * of the "PASSWORD" magic value found in every registers. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, + .impl = { + .max_access_size = 4, + }, +}; + +static void cprman_reset(DeviceState *dev) +{ + BCM2835CprmanState *s = CPRMAN(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + clock_update_hz(s->xosc, s->xosc_freq); +} + +static void cprman_init(Object *obj) +{ + BCM2835CprmanState *s = CPRMAN(obj); + + s->xosc = clock_new(obj, "xosc"); + + memory_region_init_io(&s->iomem, obj, &cprman_ops, + s, "bcm2835-cprman", 0x2000); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); +} + +static const VMStateDescription cprman_vmstate = { + .name = TYPE_BCM2835_CPRMAN, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, BCM2835CprmanState, CPRMAN_NUM_REGS), + VMSTATE_END_OF_LIST() + } +}; + +static Property cprman_properties[] = { + DEFINE_PROP_UINT32("xosc-freq-hz", BCM2835CprmanState, xosc_freq, 19200000), + DEFINE_PROP_END_OF_LIST() +}; + +static void cprman_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = cprman_reset; + dc->vmsd = &cprman_vmstate; + device_class_set_props(dc, cprman_properties); +} + +static const TypeInfo cprman_info = { + .name = TYPE_BCM2835_CPRMAN, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835CprmanState), + .class_init = cprman_class_init, + .instance_init = cprman_init, +}; + +static void cprman_register_types(void) +{ + type_register_static(&cprman_info); +} + +type_init(cprman_register_types); diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files( 'bcm2835_property.c', 'bcm2835_rng.c', 'bcm2835_thermal.c', + 'bcm2835_cprman.c', )) softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c')) softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c', 'zynq-xadc.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ grlib_apb_pnp_read(uint64_t addr, uint32_t value) "APB PnP read addr:0x%03"PRIx6 # pca9552.c pca955x_gpio_status(const char *description, const char *buf) "%s GPIOs 0-15 [%s]" pca955x_gpio_change(const char *description, unsigned id, unsigned prev_state, unsigned current_state) "%s GPIO id:%u status: %u -> %u" + +# bcm2835_cprman.c +bcm2835_cprman_read(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 +bcm2835_cprman_write(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 +bcm2835_cprman_write_invalid_magic(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64 -- 2.20.1 From: Luc Michel <luc@lmichel.fr> There are 5 PLLs in the CPRMAN, namely PLL A, C, D, H and B. All of them take the xosc clock as input and produce a new clock. This commit adds a skeleton implementation for the PLLs as sub-devices of the CPRMAN. The PLLs are instantiated and connected internally to the main oscillator. Each PLL has 6 registers : CM, A2W_CTRL, A2W_ANA[0,1,2,3], A2W_FRAC. A write to any of them triggers a call to the (not yet implemented) pll_update function. If the main oscillator changes frequency, an update is also triggered. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 29 +++++ include/hw/misc/bcm2835_cprman_internals.h | 144 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 108 ++++++++++++++++ 3 files changed, 281 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(BCM2835CprmanState, CPRMAN, #define CPRMAN_NUM_REGS (0x2000 / sizeof(uint32_t)) +typedef enum CprmanPll { + CPRMAN_PLLA = 0, + CPRMAN_PLLC, + CPRMAN_PLLD, + CPRMAN_PLLH, + CPRMAN_PLLB, + + CPRMAN_NUM_PLL +} CprmanPll; + +typedef struct CprmanPllState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanPll id; + + uint32_t *reg_cm; + uint32_t *reg_a2w_ctrl; + uint32_t *reg_a2w_ana; /* ANA[0] .. ANA[3] */ + uint32_t prediv_mask; /* prediv bit in ana[1] */ + uint32_t *reg_a2w_frac; + + Clock *xosc_in; + Clock *out; +} CprmanPllState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { /*< public >*/ MemoryRegion iomem; + CprmanPllState plls[CPRMAN_NUM_PLL]; + uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #include "hw/registerfields.h" #include "hw/misc/bcm2835_cprman.h" +#define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" + +DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, + TYPE_CPRMAN_PLL) + /* Register map */ +/* PLLs */ +REG32(CM_PLLA, 0x104) + FIELD(CM_PLLA, LOADDSI0, 0, 1) + FIELD(CM_PLLA, HOLDDSI0, 1, 1) + FIELD(CM_PLLA, LOADCCP2, 2, 1) + FIELD(CM_PLLA, HOLDCCP2, 3, 1) + FIELD(CM_PLLA, LOADCORE, 4, 1) + FIELD(CM_PLLA, HOLDCORE, 5, 1) + FIELD(CM_PLLA, LOADPER, 6, 1) + FIELD(CM_PLLA, HOLDPER, 7, 1) + FIELD(CM_PLLx, ANARST, 8, 1) +REG32(CM_PLLC, 0x108) + FIELD(CM_PLLC, LOADCORE0, 0, 1) + FIELD(CM_PLLC, HOLDCORE0, 1, 1) + FIELD(CM_PLLC, LOADCORE1, 2, 1) + FIELD(CM_PLLC, HOLDCORE1, 3, 1) + FIELD(CM_PLLC, LOADCORE2, 4, 1) + FIELD(CM_PLLC, HOLDCORE2, 5, 1) + FIELD(CM_PLLC, LOADPER, 6, 1) + FIELD(CM_PLLC, HOLDPER, 7, 1) +REG32(CM_PLLD, 0x10c) + FIELD(CM_PLLD, LOADDSI0, 0, 1) + FIELD(CM_PLLD, HOLDDSI0, 1, 1) + FIELD(CM_PLLD, LOADDSI1, 2, 1) + FIELD(CM_PLLD, HOLDDSI1, 3, 1) + FIELD(CM_PLLD, LOADCORE, 4, 1) + FIELD(CM_PLLD, HOLDCORE, 5, 1) + FIELD(CM_PLLD, LOADPER, 6, 1) + FIELD(CM_PLLD, HOLDPER, 7, 1) +REG32(CM_PLLH, 0x110) + FIELD(CM_PLLH, LOADPIX, 0, 1) + FIELD(CM_PLLH, LOADAUX, 1, 1) + FIELD(CM_PLLH, LOADRCAL, 2, 1) +REG32(CM_PLLB, 0x170) + FIELD(CM_PLLB, LOADARM, 0, 1) + FIELD(CM_PLLB, HOLDARM, 1, 1) + +REG32(A2W_PLLA_CTRL, 0x1100) + FIELD(A2W_PLLx_CTRL, NDIV, 0, 10) + FIELD(A2W_PLLx_CTRL, PDIV, 12, 3) + FIELD(A2W_PLLx_CTRL, PWRDN, 16, 1) + FIELD(A2W_PLLx_CTRL, PRST_DISABLE, 17, 1) +REG32(A2W_PLLC_CTRL, 0x1120) +REG32(A2W_PLLD_CTRL, 0x1140) +REG32(A2W_PLLH_CTRL, 0x1160) +REG32(A2W_PLLB_CTRL, 0x11e0) + +REG32(A2W_PLLA_ANA0, 0x1010) +REG32(A2W_PLLA_ANA1, 0x1014) + FIELD(A2W_PLLx_ANA1, FB_PREDIV, 14, 1) +REG32(A2W_PLLA_ANA2, 0x1018) +REG32(A2W_PLLA_ANA3, 0x101c) + +REG32(A2W_PLLC_ANA0, 0x1030) +REG32(A2W_PLLC_ANA1, 0x1034) +REG32(A2W_PLLC_ANA2, 0x1038) +REG32(A2W_PLLC_ANA3, 0x103c) + +REG32(A2W_PLLD_ANA0, 0x1050) +REG32(A2W_PLLD_ANA1, 0x1054) +REG32(A2W_PLLD_ANA2, 0x1058) +REG32(A2W_PLLD_ANA3, 0x105c) + +REG32(A2W_PLLH_ANA0, 0x1070) +REG32(A2W_PLLH_ANA1, 0x1074) + FIELD(A2W_PLLH_ANA1, FB_PREDIV, 11, 1) +REG32(A2W_PLLH_ANA2, 0x1078) +REG32(A2W_PLLH_ANA3, 0x107c) + +REG32(A2W_PLLB_ANA0, 0x10f0) +REG32(A2W_PLLB_ANA1, 0x10f4) +REG32(A2W_PLLB_ANA2, 0x10f8) +REG32(A2W_PLLB_ANA3, 0x10fc) + +REG32(A2W_PLLA_FRAC, 0x1200) + FIELD(A2W_PLLx_FRAC, FRAC, 0, 20) +REG32(A2W_PLLC_FRAC, 0x1220) +REG32(A2W_PLLD_FRAC, 0x1240) +REG32(A2W_PLLH_FRAC, 0x1260) +REG32(A2W_PLLB_FRAC, 0x12e0) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. @@ -XXX,XX +XXX,XX @@ FIELD(CPRMAN, PASSWORD, 24, 8) #define CPRMAN_PASSWORD 0x5a +/* PLL init info */ +typedef struct PLLInitInfo { + const char *name; + size_t cm_offset; + size_t a2w_ctrl_offset; + size_t a2w_ana_offset; + uint32_t prediv_mask; /* Prediv bit in ana[1] */ + size_t a2w_frac_offset; +} PLLInitInfo; + +#define FILL_PLL_INIT_INFO(pll_) \ + .cm_offset = R_CM_ ## pll_, \ + .a2w_ctrl_offset = R_A2W_ ## pll_ ## _CTRL, \ + .a2w_ana_offset = R_A2W_ ## pll_ ## _ANA0, \ + .a2w_frac_offset = R_A2W_ ## pll_ ## _FRAC + +static const PLLInitInfo PLL_INIT_INFO[] = { + [CPRMAN_PLLA] = { + .name = "plla", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLA), + }, + [CPRMAN_PLLC] = { + .name = "pllc", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLC), + }, + [CPRMAN_PLLD] = { + .name = "plld", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLD), + }, + [CPRMAN_PLLH] = { + .name = "pllh", + .prediv_mask = R_A2W_PLLH_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLH), + }, + [CPRMAN_PLLB] = { + .name = "pllb", + .prediv_mask = R_A2W_PLLx_ANA1_FB_PREDIV_MASK, + FILL_PLL_INIT_INFO(PLLB), + }, +}; + +#undef FILL_PLL_CHANNEL_INIT_INFO + +static inline void set_pll_init_info(BCM2835CprmanState *s, + CprmanPllState *pll, + CprmanPll id) +{ + pll->id = id; + pll->reg_cm = &s->regs[PLL_INIT_INFO[id].cm_offset]; + pll->reg_a2w_ctrl = &s->regs[PLL_INIT_INFO[id].a2w_ctrl_offset]; + pll->reg_a2w_ana = &s->regs[PLL_INIT_INFO[id].a2w_ana_offset]; + pll->prediv_mask = PLL_INIT_INFO[id].prediv_mask; + pll->reg_a2w_frac = &s->regs[PLL_INIT_INFO[id].a2w_frac_offset]; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_cprman_internals.h" #include "trace.h" +/* PLL */ + +static void pll_update(CprmanPllState *pll) +{ + clock_update(pll->out, 0); +} + +static void pll_xosc_update(void *opaque) +{ + pll_update(CPRMAN_PLL(opaque)); +} + +static void pll_init(Object *obj) +{ + CprmanPllState *s = CPRMAN_PLL(obj); + + s->xosc_in = qdev_init_clock_in(DEVICE(s), "xosc-in", pll_xosc_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription pll_vmstate = { + .name = TYPE_CPRMAN_PLL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(xosc_in, CprmanPllState), + VMSTATE_END_OF_LIST() + } +}; + +static void pll_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &pll_vmstate; +} + +static const TypeInfo cprman_pll_info = { + .name = TYPE_CPRMAN_PLL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanPllState), + .class_init = pll_class_init, + .instance_init = pll_init, +}; + + /* CPRMAN "top level" model */ static uint64_t cprman_read(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, return r; } +#define CASE_PLL_REGS(pll_) \ + case R_CM_ ## pll_: \ + case R_A2W_ ## pll_ ## _CTRL: \ + case R_A2W_ ## pll_ ## _ANA0: \ + case R_A2W_ ## pll_ ## _ANA1: \ + case R_A2W_ ## pll_ ## _ANA2: \ + case R_A2W_ ## pll_ ## _ANA3: \ + case R_A2W_ ## pll_ ## _FRAC + static void cprman_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, trace_bcm2835_cprman_write(offset, value); s->regs[idx] = value; + switch (idx) { + CASE_PLL_REGS(PLLA) : + pll_update(&s->plls[CPRMAN_PLLA]); + break; + + CASE_PLL_REGS(PLLC) : + pll_update(&s->plls[CPRMAN_PLLC]); + break; + + CASE_PLL_REGS(PLLD) : + pll_update(&s->plls[CPRMAN_PLLD]); + break; + + CASE_PLL_REGS(PLLH) : + pll_update(&s->plls[CPRMAN_PLLH]); + break; + + CASE_PLL_REGS(PLLB) : + pll_update(&s->plls[CPRMAN_PLLB]); + break; + } } +#undef CASE_PLL_REGS + static const MemoryRegionOps cprman_ops = { .read = cprman_read, .write = cprman_write, @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cprman_ops = { static void cprman_reset(DeviceState *dev) { BCM2835CprmanState *s = CPRMAN(dev); + size_t i; memset(s->regs, 0, sizeof(s->regs)); + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + device_cold_reset(DEVICE(&s->plls[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } static void cprman_init(Object *obj) { BCM2835CprmanState *s = CPRMAN(obj); + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + object_initialize_child(obj, PLL_INIT_INFO[i].name, + &s->plls[i], TYPE_CPRMAN_PLL); + set_pll_init_info(s, &s->plls[i], i); + } s->xosc = clock_new(obj, "xosc"); @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void cprman_realize(DeviceState *dev, Error **errp) +{ + BCM2835CprmanState *s = CPRMAN(dev); + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + CprmanPllState *pll = &s->plls[i]; + + clock_set_source(pll->xosc_in, s->xosc); + + if (!qdev_realize(DEVICE(pll), NULL, errp)) { + return; + } + } +} + static const VMStateDescription cprman_vmstate = { .name = TYPE_BCM2835_CPRMAN, .version_id = 1, @@ -XXX,XX +XXX,XX @@ static void cprman_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = cprman_realize; dc->reset = cprman_reset; dc->vmsd = &cprman_vmstate; device_class_set_props(dc, cprman_properties); @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_info = { static void cprman_register_types(void) { type_register_static(&cprman_info); + type_register_static(&cprman_pll_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The CPRMAN PLLs generate a clock based on a prescaler, a multiplier and a divider. The prescaler doubles the parent (xosc) frequency, then the multiplier/divider are applied. The multiplier has an integer and a fractional part. This commit also implements the CPRMAN CM_LOCK register. This register reports which PLL is currently locked. We consider a PLL has being locked as soon as it is enabled (on real hardware, there is a delay after turning a PLL on, for it to stabilize). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman_internals.h | 8 +++ hw/misc/bcm2835_cprman.c | 64 +++++++++++++++++++++- 2 files changed, 71 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLD_FRAC, 0x1240) REG32(A2W_PLLH_FRAC, 0x1260) REG32(A2W_PLLB_FRAC, 0x12e0) +/* misc registers */ +REG32(CM_LOCK, 0x114) + FIELD(CM_LOCK, FLOCKH, 12, 1) + FIELD(CM_LOCK, FLOCKD, 11, 1) + FIELD(CM_LOCK, FLOCKC, 10, 1) + FIELD(CM_LOCK, FLOCKB, 9, 1) + FIELD(CM_LOCK, FLOCKA, 8, 1) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ /* PLL */ +static bool pll_is_locked(const CprmanPllState *pll) +{ + return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN) + && !FIELD_EX32(*pll->reg_cm, CM_PLLx, ANARST); +} + static void pll_update(CprmanPllState *pll) { - clock_update(pll->out, 0); + uint64_t freq, ndiv, fdiv, pdiv; + + if (!pll_is_locked(pll)) { + clock_update(pll->out, 0); + return; + } + + pdiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PDIV); + + if (!pdiv) { + clock_update(pll->out, 0); + return; + } + + ndiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, NDIV); + fdiv = FIELD_EX32(*pll->reg_a2w_frac, A2W_PLLx_FRAC, FRAC); + + if (pll->reg_a2w_ana[1] & pll->prediv_mask) { + /* The prescaler doubles the parent frequency */ + ndiv *= 2; + fdiv *= 2; + } + + /* + * We have a multiplier with an integer part (ndiv) and a fractional part + * (fdiv), and a divider (pdiv). + */ + freq = clock_get_hz(pll->xosc_in) * + ((ndiv << R_A2W_PLLx_FRAC_FRAC_LENGTH) + fdiv); + freq /= pdiv; + freq >>= R_A2W_PLLx_FRAC_FRAC_LENGTH; + + clock_update_hz(pll->out, freq); } static void pll_xosc_update(void *opaque) @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* CPRMAN "top level" model */ +static uint32_t get_cm_lock(const BCM2835CprmanState *s) +{ + static const int CM_LOCK_MAPPING[CPRMAN_NUM_PLL] = { + [CPRMAN_PLLA] = R_CM_LOCK_FLOCKA_SHIFT, + [CPRMAN_PLLC] = R_CM_LOCK_FLOCKC_SHIFT, + [CPRMAN_PLLD] = R_CM_LOCK_FLOCKD_SHIFT, + [CPRMAN_PLLH] = R_CM_LOCK_FLOCKH_SHIFT, + [CPRMAN_PLLB] = R_CM_LOCK_FLOCKB_SHIFT, + }; + + uint32_t r = 0; + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + r |= pll_is_locked(&s->plls[i]) << CM_LOCK_MAPPING[i]; + } + + return r; +} + static uint64_t cprman_read(void *opaque, hwaddr offset, unsigned size) { @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, size_t idx = offset / sizeof(uint32_t); switch (idx) { + case R_CM_LOCK: + r = get_cm_lock(s); + break; + default: r = s->regs[idx]; } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> PLLs are composed of multiple channels. Each channel outputs one clock signal. They are modeled as one device taking the PLL generated clock as input, and outputting a new clock. A channel shares the CM register with its parent PLL, and has its own A2W_CTRL register. A write to the CM register will trigger an update of the PLL and all its channels, while a write to an A2W_CTRL channel register will update the required channel only. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 44 ++++++ include/hw/misc/bcm2835_cprman_internals.h | 146 +++++++++++++++++++ hw/misc/bcm2835_cprman.c | 155 +++++++++++++++++++-- 3 files changed, 337 insertions(+), 8 deletions(-) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef enum CprmanPll { CPRMAN_NUM_PLL } CprmanPll; +typedef enum CprmanPllChannel { + CPRMAN_PLLA_CHANNEL_DSI0 = 0, + CPRMAN_PLLA_CHANNEL_CORE, + CPRMAN_PLLA_CHANNEL_PER, + CPRMAN_PLLA_CHANNEL_CCP2, + + CPRMAN_PLLC_CHANNEL_CORE2, + CPRMAN_PLLC_CHANNEL_CORE1, + CPRMAN_PLLC_CHANNEL_PER, + CPRMAN_PLLC_CHANNEL_CORE0, + + CPRMAN_PLLD_CHANNEL_DSI0, + CPRMAN_PLLD_CHANNEL_CORE, + CPRMAN_PLLD_CHANNEL_PER, + CPRMAN_PLLD_CHANNEL_DSI1, + + CPRMAN_PLLH_CHANNEL_AUX, + CPRMAN_PLLH_CHANNEL_RCAL, + CPRMAN_PLLH_CHANNEL_PIX, + + CPRMAN_PLLB_CHANNEL_ARM, + + CPRMAN_NUM_PLL_CHANNEL, +} CprmanPllChannel; + typedef struct CprmanPllState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct CprmanPllState { Clock *out; } CprmanPllState; +typedef struct CprmanPllChannelState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanPllChannel id; + CprmanPll parent; + + uint32_t *reg_cm; + uint32_t hold_mask; + uint32_t load_mask; + uint32_t *reg_a2w_ctrl; + int fixed_divider; + + Clock *pll_in; + Clock *out; +} CprmanPllChannelState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { MemoryRegion iomem; CprmanPllState plls[CPRMAN_NUM_PLL]; + CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_cprman.h" #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" +#define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) +DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, + TYPE_CPRMAN_PLL_CHANNEL) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLD_FRAC, 0x1240) REG32(A2W_PLLH_FRAC, 0x1260) REG32(A2W_PLLB_FRAC, 0x12e0) +/* PLL channels */ +REG32(A2W_PLLA_DSI0, 0x1300) + FIELD(A2W_PLLx_CHANNELy, DIV, 0, 8) + FIELD(A2W_PLLx_CHANNELy, DISABLE, 8, 1) +REG32(A2W_PLLA_CORE, 0x1400) +REG32(A2W_PLLA_PER, 0x1500) +REG32(A2W_PLLA_CCP2, 0x1600) + +REG32(A2W_PLLC_CORE2, 0x1320) +REG32(A2W_PLLC_CORE1, 0x1420) +REG32(A2W_PLLC_PER, 0x1520) +REG32(A2W_PLLC_CORE0, 0x1620) + +REG32(A2W_PLLD_DSI0, 0x1340) +REG32(A2W_PLLD_CORE, 0x1440) +REG32(A2W_PLLD_PER, 0x1540) +REG32(A2W_PLLD_DSI1, 0x1640) + +REG32(A2W_PLLH_AUX, 0x1360) +REG32(A2W_PLLH_RCAL, 0x1460) +REG32(A2W_PLLH_PIX, 0x1560) +REG32(A2W_PLLH_STS, 0x1660) + +REG32(A2W_PLLB_ARM, 0x13e0) + /* misc registers */ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKH, 12, 1) @@ -XXX,XX +XXX,XX @@ static inline void set_pll_init_info(BCM2835CprmanState *s, pll->reg_a2w_frac = &s->regs[PLL_INIT_INFO[id].a2w_frac_offset]; } + +/* PLL channel init info */ +typedef struct PLLChannelInitInfo { + const char *name; + CprmanPll parent; + size_t cm_offset; + uint32_t cm_hold_mask; + uint32_t cm_load_mask; + size_t a2w_ctrl_offset; + unsigned int fixed_divider; +} PLLChannelInitInfo; + +#define FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_) \ + .parent = CPRMAN_ ## pll_, \ + .cm_offset = R_CM_ ## pll_, \ + .cm_load_mask = R_CM_ ## pll_ ## _ ## LOAD ## channel_ ## _MASK, \ + .a2w_ctrl_offset = R_A2W_ ## pll_ ## _ ## channel_ + +#define FILL_PLL_CHANNEL_INIT_INFO(pll_, channel_) \ + FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_), \ + .cm_hold_mask = R_CM_ ## pll_ ## _ ## HOLD ## channel_ ## _MASK, \ + .fixed_divider = 1 + +#define FILL_PLL_CHANNEL_INIT_INFO_nohold(pll_, channel_) \ + FILL_PLL_CHANNEL_INIT_INFO_common(pll_, channel_), \ + .cm_hold_mask = 0 + +static PLLChannelInitInfo PLL_CHANNEL_INIT_INFO[] = { + [CPRMAN_PLLA_CHANNEL_DSI0] = { + .name = "plla-dsi0", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, DSI0), + }, + [CPRMAN_PLLA_CHANNEL_CORE] = { + .name = "plla-core", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, CORE), + }, + [CPRMAN_PLLA_CHANNEL_PER] = { + .name = "plla-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, PER), + }, + [CPRMAN_PLLA_CHANNEL_CCP2] = { + .name = "plla-ccp2", + FILL_PLL_CHANNEL_INIT_INFO(PLLA, CCP2), + }, + + [CPRMAN_PLLC_CHANNEL_CORE2] = { + .name = "pllc-core2", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE2), + }, + [CPRMAN_PLLC_CHANNEL_CORE1] = { + .name = "pllc-core1", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE1), + }, + [CPRMAN_PLLC_CHANNEL_PER] = { + .name = "pllc-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, PER), + }, + [CPRMAN_PLLC_CHANNEL_CORE0] = { + .name = "pllc-core0", + FILL_PLL_CHANNEL_INIT_INFO(PLLC, CORE0), + }, + + [CPRMAN_PLLD_CHANNEL_DSI0] = { + .name = "plld-dsi0", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, DSI0), + }, + [CPRMAN_PLLD_CHANNEL_CORE] = { + .name = "plld-core", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, CORE), + }, + [CPRMAN_PLLD_CHANNEL_PER] = { + .name = "plld-per", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, PER), + }, + [CPRMAN_PLLD_CHANNEL_DSI1] = { + .name = "plld-dsi1", + FILL_PLL_CHANNEL_INIT_INFO(PLLD, DSI1), + }, + + [CPRMAN_PLLH_CHANNEL_AUX] = { + .name = "pllh-aux", + .fixed_divider = 1, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, AUX), + }, + [CPRMAN_PLLH_CHANNEL_RCAL] = { + .name = "pllh-rcal", + .fixed_divider = 10, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, RCAL), + }, + [CPRMAN_PLLH_CHANNEL_PIX] = { + .name = "pllh-pix", + .fixed_divider = 10, + FILL_PLL_CHANNEL_INIT_INFO_nohold(PLLH, PIX), + }, + + [CPRMAN_PLLB_CHANNEL_ARM] = { + .name = "pllb-arm", + FILL_PLL_CHANNEL_INIT_INFO(PLLB, ARM), + }, +}; + +#undef FILL_PLL_CHANNEL_INIT_INFO_nohold +#undef FILL_PLL_CHANNEL_INIT_INFO +#undef FILL_PLL_CHANNEL_INIT_INFO_common + +static inline void set_pll_channel_init_info(BCM2835CprmanState *s, + CprmanPllChannelState *channel, + CprmanPllChannel id) +{ + channel->id = id; + channel->parent = PLL_CHANNEL_INIT_INFO[id].parent; + channel->reg_cm = &s->regs[PLL_CHANNEL_INIT_INFO[id].cm_offset]; + channel->hold_mask = PLL_CHANNEL_INIT_INFO[id].cm_hold_mask; + channel->load_mask = PLL_CHANNEL_INIT_INFO[id].cm_load_mask; + channel->reg_a2w_ctrl = &s->regs[PLL_CHANNEL_INIT_INFO[id].a2w_ctrl_offset]; + channel->fixed_divider = PLL_CHANNEL_INIT_INFO[id].fixed_divider; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { }; +/* PLL channel */ + +static void pll_channel_update(CprmanPllChannelState *channel) +{ + clock_update(channel->out, 0); +} + +/* Update a PLL and all its channels */ +static void pll_update_all_channels(BCM2835CprmanState *s, + CprmanPllState *pll) +{ + size_t i; + + pll_update(pll); + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + CprmanPllChannelState *channel = &s->channels[i]; + if (channel->parent == pll->id) { + pll_channel_update(channel); + } + } +} + +static void pll_channel_pll_in_update(void *opaque) +{ + pll_channel_update(CPRMAN_PLL_CHANNEL(opaque)); +} + +static void pll_channel_init(Object *obj) +{ + CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(obj); + + s->pll_in = qdev_init_clock_in(DEVICE(s), "pll-in", + pll_channel_pll_in_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription pll_channel_vmstate = { + .name = TYPE_CPRMAN_PLL_CHANNEL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(pll_in, CprmanPllChannelState), + VMSTATE_END_OF_LIST() + } +}; + +static void pll_channel_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &pll_channel_vmstate; +} + +static const TypeInfo cprman_pll_channel_info = { + .name = TYPE_CPRMAN_PLL_CHANNEL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanPllChannelState), + .class_init = pll_channel_class_init, + .instance_init = pll_channel_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static uint64_t cprman_read(void *opaque, hwaddr offset, return r; } -#define CASE_PLL_REGS(pll_) \ - case R_CM_ ## pll_: \ +static inline void update_pll_and_channels_from_cm(BCM2835CprmanState *s, + size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + if (PLL_INIT_INFO[i].cm_offset == idx) { + pll_update_all_channels(s, &s->plls[i]); + return; + } + } +} + +static inline void update_channel_from_a2w(BCM2835CprmanState *s, size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + if (PLL_CHANNEL_INIT_INFO[i].a2w_ctrl_offset == idx) { + pll_channel_update(&s->channels[i]); + return; + } + } +} + +#define CASE_PLL_A2W_REGS(pll_) \ case R_A2W_ ## pll_ ## _CTRL: \ case R_A2W_ ## pll_ ## _ANA0: \ case R_A2W_ ## pll_ ## _ANA1: \ @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, s->regs[idx] = value; switch (idx) { - CASE_PLL_REGS(PLLA) : + case R_CM_PLLA ... R_CM_PLLH: + case R_CM_PLLB: + /* + * A given CM_PLLx register is shared by both the PLL and the channels + * of this PLL. + */ + update_pll_and_channels_from_cm(s, idx); + break; + + CASE_PLL_A2W_REGS(PLLA) : pll_update(&s->plls[CPRMAN_PLLA]); break; - CASE_PLL_REGS(PLLC) : + CASE_PLL_A2W_REGS(PLLC) : pll_update(&s->plls[CPRMAN_PLLC]); break; - CASE_PLL_REGS(PLLD) : + CASE_PLL_A2W_REGS(PLLD) : pll_update(&s->plls[CPRMAN_PLLD]); break; - CASE_PLL_REGS(PLLH) : + CASE_PLL_A2W_REGS(PLLH) : pll_update(&s->plls[CPRMAN_PLLH]); break; - CASE_PLL_REGS(PLLB) : + CASE_PLL_A2W_REGS(PLLB) : pll_update(&s->plls[CPRMAN_PLLB]); break; + + case R_A2W_PLLA_DSI0: + case R_A2W_PLLA_CORE: + case R_A2W_PLLA_PER: + case R_A2W_PLLA_CCP2: + case R_A2W_PLLC_CORE2: + case R_A2W_PLLC_CORE1: + case R_A2W_PLLC_PER: + case R_A2W_PLLC_CORE0: + case R_A2W_PLLD_DSI0: + case R_A2W_PLLD_CORE: + case R_A2W_PLLD_PER: + case R_A2W_PLLD_DSI1: + case R_A2W_PLLH_AUX: + case R_A2W_PLLH_RCAL: + case R_A2W_PLLH_PIX: + case R_A2W_PLLB_ARM: + update_channel_from_a2w(s, idx); + break; } } -#undef CASE_PLL_REGS +#undef CASE_PLL_A2W_REGS static const MemoryRegionOps cprman_ops = { .read = cprman_read, @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->plls[i])); } + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + device_cold_reset(DEVICE(&s->channels[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_init_info(s, &s->plls[i], i); } + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + object_initialize_child(obj, PLL_CHANNEL_INIT_INFO[i].name, + &s->channels[i], + TYPE_CPRMAN_PLL_CHANNEL); + set_pll_channel_init_info(s, &s->channels[i], i); + } + s->xosc = clock_new(obj, "xosc"); memory_region_init_io(&s->iomem, obj, &cprman_ops, @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) return; } } + + for (i = 0; i < CPRMAN_NUM_PLL_CHANNEL; i++) { + CprmanPllChannelState *channel = &s->channels[i]; + CprmanPll parent = PLL_CHANNEL_INIT_INFO[i].parent; + Clock *parent_clk = s->plls[parent].out; + + clock_set_source(channel->pll_in, parent_clk); + + if (!qdev_realize(DEVICE(channel), NULL, errp)) { + return; + } + } } static const VMStateDescription cprman_vmstate = { @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) { type_register_static(&cprman_info); type_register_static(&cprman_pll_info); + type_register_static(&cprman_pll_channel_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> A PLL channel is able to further divide the generated PLL frequency. The divider is given in the CTRL_A2W register. Some channels have an additional fixed divider which is always applied to the signal. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/bcm2835_cprman.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* PLL channel */ +static bool pll_channel_is_enabled(CprmanPllChannelState *channel) +{ + /* + * XXX I'm not sure of the purpose of the LOAD field. The Linux driver does + * not set it when enabling the channel, but does clear it when disabling + * it. + */ + return !FIELD_EX32(*channel->reg_a2w_ctrl, A2W_PLLx_CHANNELy, DISABLE) + && !(*channel->reg_cm & channel->hold_mask); +} + static void pll_channel_update(CprmanPllChannelState *channel) { - clock_update(channel->out, 0); + uint64_t freq, div; + + if (!pll_channel_is_enabled(channel)) { + clock_update(channel->out, 0); + return; + } + + div = FIELD_EX32(*channel->reg_a2w_ctrl, A2W_PLLx_CHANNELy, DIV); + + if (!div) { + /* + * It seems that when the divider value is 0, it is considered as + * being maximum by the hardware (see the Linux driver). + */ + div = R_A2W_PLLx_CHANNELy_DIV_MASK; + } + + /* Some channels have an additional fixed divider */ + freq = clock_get_hz(channel->pll_in) / (div * channel->fixed_divider); + + clock_update_hz(channel->out, freq); } /* Update a PLL and all its channels */ -- 2.20.1 From: Luc Michel <luc@lmichel.fr> The clock multiplexers are the last clock stage in the CPRMAN. Each mux outputs one clock signal that goes out of the CPRMAN to the SoC peripherals. Each mux has at most 10 sources. The sources 0 to 3 are common to all muxes. They are: 0. ground (no clock signal) 1. the main oscillator (xosc) 2. "test debug 0" clock 3. "test debug 1" clock Test debug 0 and 1 are actual clock muxes that can be used as sources to other muxes (for debug purpose). Sources 4 to 9 are mux specific and can be unpopulated (grounded). Those sources are fed by the PLL channels outputs. One corner case exists for DSI0E and DSI0P muxes. They have their source number 4 connected to an intermediate multiplexer that can select between PLLA-DSI0 and PLLD-DSI0 channel. This multiplexer is called DSI0HSCK and is not a clock mux as such. It is really a simple mux from the hardware point of view (see https://elinux.org/The_Undocumented_Pi). This mux is not implemented in this commit. Note that there is some muxes for which sources are unknown (because of a lack of documentation). For those cases all the sources are connected to ground in this implementation. Each clock mux output is exported by the CPRMAN at the qdev level, adding the suffix '-out' to the mux name to form the output clock name. (E.g. the 'uart' mux sees its output exported as 'uart-out' at the CPRMAN level.) Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 85 +++++ include/hw/misc/bcm2835_cprman_internals.h | 422 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 151 ++++++++ 3 files changed, 658 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef enum CprmanPllChannel { CPRMAN_PLLB_CHANNEL_ARM, CPRMAN_NUM_PLL_CHANNEL, + + /* Special values used when connecting clock sources to clocks */ + CPRMAN_CLOCK_SRC_NORMAL = -1, + CPRMAN_CLOCK_SRC_FORCE_GROUND = -2, + CPRMAN_CLOCK_SRC_DSI0HSCK = -3, } CprmanPllChannel; +typedef enum CprmanClockMux { + CPRMAN_CLOCK_GNRIC, + CPRMAN_CLOCK_VPU, + CPRMAN_CLOCK_SYS, + CPRMAN_CLOCK_PERIA, + CPRMAN_CLOCK_PERII, + CPRMAN_CLOCK_H264, + CPRMAN_CLOCK_ISP, + CPRMAN_CLOCK_V3D, + CPRMAN_CLOCK_CAM0, + CPRMAN_CLOCK_CAM1, + CPRMAN_CLOCK_CCP2, + CPRMAN_CLOCK_DSI0E, + CPRMAN_CLOCK_DSI0P, + CPRMAN_CLOCK_DPI, + CPRMAN_CLOCK_GP0, + CPRMAN_CLOCK_GP1, + CPRMAN_CLOCK_GP2, + CPRMAN_CLOCK_HSM, + CPRMAN_CLOCK_OTP, + CPRMAN_CLOCK_PCM, + CPRMAN_CLOCK_PWM, + CPRMAN_CLOCK_SLIM, + CPRMAN_CLOCK_SMI, + CPRMAN_CLOCK_TEC, + CPRMAN_CLOCK_TD0, + CPRMAN_CLOCK_TD1, + CPRMAN_CLOCK_TSENS, + CPRMAN_CLOCK_TIMER, + CPRMAN_CLOCK_UART, + CPRMAN_CLOCK_VEC, + CPRMAN_CLOCK_PULSE, + CPRMAN_CLOCK_SDC, + CPRMAN_CLOCK_ARM, + CPRMAN_CLOCK_AVEO, + CPRMAN_CLOCK_EMMC, + CPRMAN_CLOCK_EMMC2, + + CPRMAN_NUM_CLOCK_MUX +} CprmanClockMux; + +typedef enum CprmanClockMuxSource { + CPRMAN_CLOCK_SRC_GND = 0, + CPRMAN_CLOCK_SRC_XOSC, + CPRMAN_CLOCK_SRC_TD0, + CPRMAN_CLOCK_SRC_TD1, + CPRMAN_CLOCK_SRC_PLLA, + CPRMAN_CLOCK_SRC_PLLC, + CPRMAN_CLOCK_SRC_PLLD, + CPRMAN_CLOCK_SRC_PLLH, + CPRMAN_CLOCK_SRC_PLLC_CORE1, + CPRMAN_CLOCK_SRC_PLLC_CORE2, + + CPRMAN_NUM_CLOCK_MUX_SRC +} CprmanClockMuxSource; + typedef struct CprmanPllState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct CprmanPllChannelState { Clock *out; } CprmanPllChannelState; +typedef struct CprmanClockMuxState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanClockMux id; + + uint32_t *reg_ctl; + uint32_t *reg_div; + int int_bits; + int frac_bits; + + Clock *srcs[CPRMAN_NUM_CLOCK_MUX_SRC]; + Clock *out; + + /* + * Used by clock srcs update callback to retrieve both the clock and the + * source number. + */ + struct CprmanClockMuxState *backref[CPRMAN_NUM_CLOCK_MUX_SRC]; +} CprmanClockMuxState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { CprmanPllState plls[CPRMAN_NUM_PLL]; CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; + CprmanClockMuxState clock_muxes[CPRMAN_NUM_CLOCK_MUX]; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; Clock *xosc; + Clock *gnd; }; #endif diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" #define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" +#define TYPE_CPRMAN_CLOCK_MUX "bcm2835-cprman-clock-mux" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, TYPE_CPRMAN_PLL_CHANNEL) +DECLARE_INSTANCE_CHECKER(CprmanClockMuxState, CPRMAN_CLOCK_MUX, + TYPE_CPRMAN_CLOCK_MUX) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(A2W_PLLH_STS, 0x1660) REG32(A2W_PLLB_ARM, 0x13e0) +/* Clock muxes */ +REG32(CM_GNRICCTL, 0x000) + FIELD(CM_CLOCKx_CTL, SRC, 0, 4) + FIELD(CM_CLOCKx_CTL, ENABLE, 4, 1) + FIELD(CM_CLOCKx_CTL, KILL, 5, 1) + FIELD(CM_CLOCKx_CTL, GATE, 6, 1) + FIELD(CM_CLOCKx_CTL, BUSY, 7, 1) + FIELD(CM_CLOCKx_CTL, BUSYD, 8, 1) + FIELD(CM_CLOCKx_CTL, MASH, 9, 2) + FIELD(CM_CLOCKx_CTL, FLIP, 11, 1) +REG32(CM_GNRICDIV, 0x004) + FIELD(CM_CLOCKx_DIV, FRAC, 0, 12) +REG32(CM_VPUCTL, 0x008) +REG32(CM_VPUDIV, 0x00c) +REG32(CM_SYSCTL, 0x010) +REG32(CM_SYSDIV, 0x014) +REG32(CM_PERIACTL, 0x018) +REG32(CM_PERIADIV, 0x01c) +REG32(CM_PERIICTL, 0x020) +REG32(CM_PERIIDIV, 0x024) +REG32(CM_H264CTL, 0x028) +REG32(CM_H264DIV, 0x02c) +REG32(CM_ISPCTL, 0x030) +REG32(CM_ISPDIV, 0x034) +REG32(CM_V3DCTL, 0x038) +REG32(CM_V3DDIV, 0x03c) +REG32(CM_CAM0CTL, 0x040) +REG32(CM_CAM0DIV, 0x044) +REG32(CM_CAM1CTL, 0x048) +REG32(CM_CAM1DIV, 0x04c) +REG32(CM_CCP2CTL, 0x050) +REG32(CM_CCP2DIV, 0x054) +REG32(CM_DSI0ECTL, 0x058) +REG32(CM_DSI0EDIV, 0x05c) +REG32(CM_DSI0PCTL, 0x060) +REG32(CM_DSI0PDIV, 0x064) +REG32(CM_DPICTL, 0x068) +REG32(CM_DPIDIV, 0x06c) +REG32(CM_GP0CTL, 0x070) +REG32(CM_GP0DIV, 0x074) +REG32(CM_GP1CTL, 0x078) +REG32(CM_GP1DIV, 0x07c) +REG32(CM_GP2CTL, 0x080) +REG32(CM_GP2DIV, 0x084) +REG32(CM_HSMCTL, 0x088) +REG32(CM_HSMDIV, 0x08c) +REG32(CM_OTPCTL, 0x090) +REG32(CM_OTPDIV, 0x094) +REG32(CM_PCMCTL, 0x098) +REG32(CM_PCMDIV, 0x09c) +REG32(CM_PWMCTL, 0x0a0) +REG32(CM_PWMDIV, 0x0a4) +REG32(CM_SLIMCTL, 0x0a8) +REG32(CM_SLIMDIV, 0x0ac) +REG32(CM_SMICTL, 0x0b0) +REG32(CM_SMIDIV, 0x0b4) +REG32(CM_TCNTCTL, 0x0c0) +REG32(CM_TCNTCNT, 0x0c4) +REG32(CM_TECCTL, 0x0c8) +REG32(CM_TECDIV, 0x0cc) +REG32(CM_TD0CTL, 0x0d0) +REG32(CM_TD0DIV, 0x0d4) +REG32(CM_TD1CTL, 0x0d8) +REG32(CM_TD1DIV, 0x0dc) +REG32(CM_TSENSCTL, 0x0e0) +REG32(CM_TSENSDIV, 0x0e4) +REG32(CM_TIMERCTL, 0x0e8) +REG32(CM_TIMERDIV, 0x0ec) +REG32(CM_UARTCTL, 0x0f0) +REG32(CM_UARTDIV, 0x0f4) +REG32(CM_VECCTL, 0x0f8) +REG32(CM_VECDIV, 0x0fc) +REG32(CM_PULSECTL, 0x190) +REG32(CM_PULSEDIV, 0x194) +REG32(CM_SDCCTL, 0x1a8) +REG32(CM_SDCDIV, 0x1ac) +REG32(CM_ARMCTL, 0x1b0) +REG32(CM_AVEOCTL, 0x1b8) +REG32(CM_AVEODIV, 0x1bc) +REG32(CM_EMMCCTL, 0x1c0) +REG32(CM_EMMCDIV, 0x1c4) +REG32(CM_EMMC2CTL, 0x1d0) +REG32(CM_EMMC2DIV, 0x1d4) + /* misc registers */ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKH, 12, 1) @@ -XXX,XX +XXX,XX @@ static inline void set_pll_channel_init_info(BCM2835CprmanState *s, channel->fixed_divider = PLL_CHANNEL_INIT_INFO[id].fixed_divider; } +/* Clock mux init info */ +typedef struct ClockMuxInitInfo { + const char *name; + size_t cm_offset; /* cm_offset[0]->CM_CTL, cm_offset[1]->CM_DIV */ + int int_bits; + int frac_bits; + + CprmanPllChannel src_mapping[CPRMAN_NUM_CLOCK_MUX_SRC]; +} ClockMuxInitInfo; + +/* + * Each clock mux can have up to 10 sources. Sources 0 to 3 are always the + * same (ground, xosc, td0, td1). Sources 4 to 9 are mux specific, and are not + * always populated. The following macros catch all those cases. + */ + +/* Unknown mapping. Connect everything to ground */ +#define SRC_MAPPING_INFO_unknown \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* gnd */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* xosc */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* test debug 0 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* test debug 1 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll a */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll d */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll h */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c, core1 */ \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, /* pll c, core2 */ \ + } + +/* Only the oscillator and the two test debug clocks */ +#define SRC_MAPPING_INFO_xosc \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* All the PLL "core" channels */ +#define SRC_MAPPING_INFO_core \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLA_CHANNEL_CORE, \ + CPRMAN_PLLC_CHANNEL_CORE0, \ + CPRMAN_PLLD_CHANNEL_CORE, \ + CPRMAN_PLLH_CHANNEL_AUX, \ + CPRMAN_PLLC_CHANNEL_CORE1, \ + CPRMAN_PLLC_CHANNEL_CORE2, \ + } + +/* All the PLL "per" channels */ +#define SRC_MAPPING_INFO_periph \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLA_CHANNEL_PER, \ + CPRMAN_PLLC_CHANNEL_PER, \ + CPRMAN_PLLD_CHANNEL_PER, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* + * The DSI0 channels. This one got an intermediate mux between the PLL channels + * and the clock input. + */ +#define SRC_MAPPING_INFO_dsi0 \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_DSI0HSCK, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +/* The DSI1 channel */ +#define SRC_MAPPING_INFO_dsi1 \ + .src_mapping = { \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_CLOCK_SRC_NORMAL, \ + CPRMAN_PLLD_CHANNEL_DSI1, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + CPRMAN_CLOCK_SRC_FORCE_GROUND, \ + } + +#define FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO(kind_) \ + SRC_MAPPING_INFO_ ## kind_ + +#define FILL_CLOCK_MUX_INIT_INFO(clock_, kind_) \ + .cm_offset = R_CM_ ## clock_ ## CTL, \ + FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO(kind_) + +static ClockMuxInitInfo CLOCK_MUX_INIT_INFO[] = { + [CPRMAN_CLOCK_GNRIC] = { + .name = "gnric", + FILL_CLOCK_MUX_INIT_INFO(GNRIC, unknown), + }, + [CPRMAN_CLOCK_VPU] = { + .name = "vpu", + .int_bits = 12, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(VPU, core), + }, + [CPRMAN_CLOCK_SYS] = { + .name = "sys", + FILL_CLOCK_MUX_INIT_INFO(SYS, unknown), + }, + [CPRMAN_CLOCK_PERIA] = { + .name = "peria", + FILL_CLOCK_MUX_INIT_INFO(PERIA, unknown), + }, + [CPRMAN_CLOCK_PERII] = { + .name = "perii", + FILL_CLOCK_MUX_INIT_INFO(PERII, unknown), + }, + [CPRMAN_CLOCK_H264] = { + .name = "h264", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(H264, core), + }, + [CPRMAN_CLOCK_ISP] = { + .name = "isp", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(ISP, core), + }, + [CPRMAN_CLOCK_V3D] = { + .name = "v3d", + FILL_CLOCK_MUX_INIT_INFO(V3D, core), + }, + [CPRMAN_CLOCK_CAM0] = { + .name = "cam0", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(CAM0, periph), + }, + [CPRMAN_CLOCK_CAM1] = { + .name = "cam1", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(CAM1, periph), + }, + [CPRMAN_CLOCK_CCP2] = { + .name = "ccp2", + FILL_CLOCK_MUX_INIT_INFO(CCP2, unknown), + }, + [CPRMAN_CLOCK_DSI0E] = { + .name = "dsi0e", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(DSI0E, dsi0), + }, + [CPRMAN_CLOCK_DSI0P] = { + .name = "dsi0p", + .int_bits = 0, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(DSI0P, dsi0), + }, + [CPRMAN_CLOCK_DPI] = { + .name = "dpi", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(DPI, periph), + }, + [CPRMAN_CLOCK_GP0] = { + .name = "gp0", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP0, periph), + }, + [CPRMAN_CLOCK_GP1] = { + .name = "gp1", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP1, periph), + }, + [CPRMAN_CLOCK_GP2] = { + .name = "gp2", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(GP2, periph), + }, + [CPRMAN_CLOCK_HSM] = { + .name = "hsm", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(HSM, periph), + }, + [CPRMAN_CLOCK_OTP] = { + .name = "otp", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(OTP, xosc), + }, + [CPRMAN_CLOCK_PCM] = { + .name = "pcm", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(PCM, periph), + }, + [CPRMAN_CLOCK_PWM] = { + .name = "pwm", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(PWM, periph), + }, + [CPRMAN_CLOCK_SLIM] = { + .name = "slim", + .int_bits = 12, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(SLIM, periph), + }, + [CPRMAN_CLOCK_SMI] = { + .name = "smi", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(SMI, periph), + }, + [CPRMAN_CLOCK_TEC] = { + .name = "tec", + .int_bits = 6, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(TEC, xosc), + }, + [CPRMAN_CLOCK_TD0] = { + .name = "td0", + FILL_CLOCK_MUX_INIT_INFO(TD0, unknown), + }, + [CPRMAN_CLOCK_TD1] = { + .name = "td1", + FILL_CLOCK_MUX_INIT_INFO(TD1, unknown), + }, + [CPRMAN_CLOCK_TSENS] = { + .name = "tsens", + .int_bits = 5, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(TSENS, xosc), + }, + [CPRMAN_CLOCK_TIMER] = { + .name = "timer", + .int_bits = 6, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(TIMER, xosc), + }, + [CPRMAN_CLOCK_UART] = { + .name = "uart", + .int_bits = 10, + .frac_bits = 12, + FILL_CLOCK_MUX_INIT_INFO(UART, periph), + }, + [CPRMAN_CLOCK_VEC] = { + .name = "vec", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(VEC, periph), + }, + [CPRMAN_CLOCK_PULSE] = { + .name = "pulse", + FILL_CLOCK_MUX_INIT_INFO(PULSE, xosc), + }, + [CPRMAN_CLOCK_SDC] = { + .name = "sdram", + .int_bits = 6, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(SDC, core), + }, + [CPRMAN_CLOCK_ARM] = { + .name = "arm", + FILL_CLOCK_MUX_INIT_INFO(ARM, unknown), + }, + [CPRMAN_CLOCK_AVEO] = { + .name = "aveo", + .int_bits = 4, + .frac_bits = 0, + FILL_CLOCK_MUX_INIT_INFO(AVEO, periph), + }, + [CPRMAN_CLOCK_EMMC] = { + .name = "emmc", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(EMMC, periph), + }, + [CPRMAN_CLOCK_EMMC2] = { + .name = "emmc2", + .int_bits = 4, + .frac_bits = 8, + FILL_CLOCK_MUX_INIT_INFO(EMMC2, unknown), + }, +}; + +#undef FILL_CLOCK_MUX_INIT_INFO +#undef FILL_CLOCK_MUX_SRC_MAPPING_INIT_INFO +#undef SRC_MAPPING_INFO_dsi1 +#undef SRC_MAPPING_INFO_dsi0 +#undef SRC_MAPPING_INFO_periph +#undef SRC_MAPPING_INFO_core +#undef SRC_MAPPING_INFO_xosc +#undef SRC_MAPPING_INFO_unknown + +static inline void set_clock_mux_init_info(BCM2835CprmanState *s, + CprmanClockMuxState *mux, + CprmanClockMux id) +{ + mux->id = id; + mux->reg_ctl = &s->regs[CLOCK_MUX_INIT_INFO[id].cm_offset]; + mux->reg_div = &s->regs[CLOCK_MUX_INIT_INFO[id].cm_offset + 1]; + mux->int_bits = CLOCK_MUX_INIT_INFO[id].int_bits; + mux->frac_bits = CLOCK_MUX_INIT_INFO[id].frac_bits; +} + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ * * The page at https://elinux.org/The_Undocumented_Pi gives the actual clock * tree configuration. + * + * The CPRMAN exposes clock outputs with the name of the clock mux suffixed + * with "-out" (e.g. "uart-out", "h264-out", ...). */ #include "qemu/osdep.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_channel_info = { }; +/* clock mux */ + +static void clock_mux_update(CprmanClockMuxState *mux) +{ + clock_update(mux->out, 0); +} + +static void clock_mux_src_update(void *opaque) +{ + CprmanClockMuxState **backref = opaque; + CprmanClockMuxState *s = *backref; + + clock_mux_update(s); +} + +static void clock_mux_init(Object *obj) +{ + CprmanClockMuxState *s = CPRMAN_CLOCK_MUX(obj); + size_t i; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX_SRC; i++) { + char *name = g_strdup_printf("srcs[%zu]", i); + s->backref[i] = s; + s->srcs[i] = qdev_init_clock_in(DEVICE(s), name, + clock_mux_src_update, + &s->backref[i]); + g_free(name); + } + + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription clock_mux_vmstate = { + .name = TYPE_CPRMAN_CLOCK_MUX, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_ARRAY_CLOCK(srcs, CprmanClockMuxState, + CPRMAN_NUM_CLOCK_MUX_SRC), + VMSTATE_END_OF_LIST() + } +}; + +static void clock_mux_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &clock_mux_vmstate; +} + +static const TypeInfo cprman_clock_mux_info = { + .name = TYPE_CPRMAN_CLOCK_MUX, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanClockMuxState), + .class_init = clock_mux_class_init, + .instance_init = clock_mux_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static inline void update_channel_from_a2w(BCM2835CprmanState *s, size_t idx) } } +static inline void update_mux_from_cm(BCM2835CprmanState *s, size_t idx) +{ + size_t i; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + if ((CLOCK_MUX_INIT_INFO[i].cm_offset == idx) || + (CLOCK_MUX_INIT_INFO[i].cm_offset + 4 == idx)) { + /* matches CM_CTL or CM_DIV mux register */ + clock_mux_update(&s->clock_muxes[i]); + return; + } + } +} + #define CASE_PLL_A2W_REGS(pll_) \ case R_A2W_ ## pll_ ## _CTRL: \ case R_A2W_ ## pll_ ## _ANA0: \ @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, case R_A2W_PLLB_ARM: update_channel_from_a2w(s, idx); break; + + case R_CM_GNRICCTL ... R_CM_SMIDIV: + case R_CM_TCNTCNT ... R_CM_VECDIV: + case R_CM_PULSECTL ... R_CM_PULSEDIV: + case R_CM_SDCCTL ... R_CM_ARMCTL: + case R_CM_AVEOCTL ... R_CM_EMMCDIV: + case R_CM_EMMC2CTL ... R_CM_EMMC2DIV: + update_mux_from_cm(s, idx); + break; } } @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->channels[i])); } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + device_cold_reset(DEVICE(&s->clock_muxes[i])); + } + clock_update_hz(s->xosc, s->xosc_freq); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_channel_init_info(s, &s->channels[i], i); } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + char *alias; + + object_initialize_child(obj, CLOCK_MUX_INIT_INFO[i].name, + &s->clock_muxes[i], + TYPE_CPRMAN_CLOCK_MUX); + set_clock_mux_init_info(s, &s->clock_muxes[i], i); + + /* Expose muxes output as CPRMAN outputs */ + alias = g_strdup_printf("%s-out", CLOCK_MUX_INIT_INFO[i].name); + qdev_alias_clock(DEVICE(&s->clock_muxes[i]), "out", DEVICE(obj), alias); + g_free(alias); + } + s->xosc = clock_new(obj, "xosc"); + s->gnd = clock_new(obj, "gnd"); + + clock_set(s->gnd, 0); memory_region_init_io(&s->iomem, obj, &cprman_ops, s, "bcm2835-cprman", 0x2000); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void connect_mux_sources(BCM2835CprmanState *s, + CprmanClockMuxState *mux, + const CprmanPllChannel *clk_mapping) +{ + size_t i; + Clock *td0 = s->clock_muxes[CPRMAN_CLOCK_TD0].out; + Clock *td1 = s->clock_muxes[CPRMAN_CLOCK_TD1].out; + + /* For sources from 0 to 3. Source 4 to 9 are mux specific */ + Clock * const CLK_SRC_MAPPING[] = { + [CPRMAN_CLOCK_SRC_GND] = s->gnd, + [CPRMAN_CLOCK_SRC_XOSC] = s->xosc, + [CPRMAN_CLOCK_SRC_TD0] = td0, + [CPRMAN_CLOCK_SRC_TD1] = td1, + }; + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX_SRC; i++) { + CprmanPllChannel mapping = clk_mapping[i]; + Clock *src; + + if (mapping == CPRMAN_CLOCK_SRC_FORCE_GROUND) { + src = s->gnd; + } else if (mapping == CPRMAN_CLOCK_SRC_DSI0HSCK) { + src = s->gnd; /* TODO */ + } else if (i < CPRMAN_CLOCK_SRC_PLLA) { + src = CLK_SRC_MAPPING[i]; + } else { + src = s->channels[mapping].out; + } + + clock_set_source(mux->srcs[i], src); + } +} + static void cprman_realize(DeviceState *dev, Error **errp) { BCM2835CprmanState *s = CPRMAN(dev); @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) return; } } + + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { + CprmanClockMuxState *clock_mux = &s->clock_muxes[i]; + + connect_mux_sources(s, clock_mux, CLOCK_MUX_INIT_INFO[i].src_mapping); + + if (!qdev_realize(DEVICE(clock_mux), NULL, errp)) { + return; + } + } } static const VMStateDescription cprman_vmstate = { @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) type_register_static(&cprman_info); type_register_static(&cprman_pll_info); type_register_static(&cprman_pll_channel_info); + type_register_static(&cprman_clock_mux_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> A clock mux can be configured to select one of its 10 sources through the CM_CTL register. It also embeds yet another clock divider, composed of an integer part and a fractional part. The number of bits of each part is mux dependent. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/bcm2835_cprman.c | 53 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-) diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_channel_info = { /* clock mux */ +static bool clock_mux_is_enabled(CprmanClockMuxState *mux) +{ + return FIELD_EX32(*mux->reg_ctl, CM_CLOCKx_CTL, ENABLE); +} + static void clock_mux_update(CprmanClockMuxState *mux) { - clock_update(mux->out, 0); + uint64_t freq; + uint32_t div, src = FIELD_EX32(*mux->reg_ctl, CM_CLOCKx_CTL, SRC); + bool enabled = clock_mux_is_enabled(mux); + + *mux->reg_ctl = FIELD_DP32(*mux->reg_ctl, CM_CLOCKx_CTL, BUSY, enabled); + + if (!enabled) { + clock_update(mux->out, 0); + return; + } + + freq = clock_get_hz(mux->srcs[src]); + + if (mux->int_bits == 0 && mux->frac_bits == 0) { + clock_update_hz(mux->out, freq); + return; + } + + /* + * The divider has an integer and a fractional part. The size of each part + * varies with the muxes (int_bits and frac_bits). Both parts are + * concatenated, with the integer part always starting at bit 12. + * + * 31 12 11 0 + * ------------------------------ + * CM_DIV | | int | frac | | + * ------------------------------ + * <-----> <------> + * int_bits frac_bits + */ + div = extract32(*mux->reg_div, + R_CM_CLOCKx_DIV_FRAC_LENGTH - mux->frac_bits, + mux->int_bits + mux->frac_bits); + + if (!div) { + clock_update(mux->out, 0); + return; + } + + freq = muldiv64(freq, 1 << mux->frac_bits, div); + + clock_update_hz(mux->out, freq); } static void clock_mux_src_update(void *opaque) { CprmanClockMuxState **backref = opaque; CprmanClockMuxState *s = *backref; + CprmanClockMuxSource src = backref - s->backref; + + if (FIELD_EX32(*s->reg_ctl, CM_CLOCKx_CTL, SRC) != src) { + return; + } clock_mux_update(s); } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> This simple mux sits between the PLL channels and the DSI0E and DSI0P clock muxes. This mux selects between PLLA-DSI0 and PLLD-DSI0 channel and outputs the selected signal to source number 4 of DSI0E/P clock muxes. It is controlled by the cm_dsi0hsck register. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman.h | 15 +++++ include/hw/misc/bcm2835_cprman_internals.h | 6 ++ hw/misc/bcm2835_cprman.c | 74 +++++++++++++++++++++- 3 files changed, 94 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/bcm2835_cprman.h b/include/hw/misc/bcm2835_cprman.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman.h +++ b/include/hw/misc/bcm2835_cprman.h @@ -XXX,XX +XXX,XX @@ typedef struct CprmanClockMuxState { struct CprmanClockMuxState *backref[CPRMAN_NUM_CLOCK_MUX_SRC]; } CprmanClockMuxState; +typedef struct CprmanDsi0HsckMuxState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CprmanClockMux id; + + uint32_t *reg_cm; + + Clock *plla_in; + Clock *plld_in; + Clock *out; +} CprmanDsi0HsckMuxState; + struct BCM2835CprmanState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct BCM2835CprmanState { CprmanPllState plls[CPRMAN_NUM_PLL]; CprmanPllChannelState channels[CPRMAN_NUM_PLL_CHANNEL]; CprmanClockMuxState clock_muxes[CPRMAN_NUM_CLOCK_MUX]; + CprmanDsi0HsckMuxState dsi0hsck_mux; uint32_t regs[CPRMAN_NUM_REGS]; uint32_t xosc_freq; diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ #define TYPE_CPRMAN_PLL "bcm2835-cprman-pll" #define TYPE_CPRMAN_PLL_CHANNEL "bcm2835-cprman-pll-channel" #define TYPE_CPRMAN_CLOCK_MUX "bcm2835-cprman-clock-mux" +#define TYPE_CPRMAN_DSI0HSCK_MUX "bcm2835-cprman-dsi0hsck-mux" DECLARE_INSTANCE_CHECKER(CprmanPllState, CPRMAN_PLL, TYPE_CPRMAN_PLL) @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(CprmanPllChannelState, CPRMAN_PLL_CHANNEL, TYPE_CPRMAN_PLL_CHANNEL) DECLARE_INSTANCE_CHECKER(CprmanClockMuxState, CPRMAN_CLOCK_MUX, TYPE_CPRMAN_CLOCK_MUX) +DECLARE_INSTANCE_CHECKER(CprmanDsi0HsckMuxState, CPRMAN_DSI0HSCK_MUX, + TYPE_CPRMAN_DSI0HSCK_MUX) /* Register map */ @@ -XXX,XX +XXX,XX @@ REG32(CM_LOCK, 0x114) FIELD(CM_LOCK, FLOCKB, 9, 1) FIELD(CM_LOCK, FLOCKA, 8, 1) +REG32(CM_DSI0HSCK, 0x120) + FIELD(CM_DSI0HSCK, SELPLLD, 0, 1) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_clock_mux_info = { }; +/* DSI0HSCK mux */ + +static void dsi0hsck_mux_update(CprmanDsi0HsckMuxState *s) +{ + bool src_is_plld = FIELD_EX32(*s->reg_cm, CM_DSI0HSCK, SELPLLD); + Clock *src = src_is_plld ? s->plld_in : s->plla_in; + + clock_update(s->out, clock_get(src)); +} + +static void dsi0hsck_mux_in_update(void *opaque) +{ + dsi0hsck_mux_update(CPRMAN_DSI0HSCK_MUX(opaque)); +} + +static void dsi0hsck_mux_init(Object *obj) +{ + CprmanDsi0HsckMuxState *s = CPRMAN_DSI0HSCK_MUX(obj); + DeviceState *dev = DEVICE(obj); + + s->plla_in = qdev_init_clock_in(dev, "plla-in", dsi0hsck_mux_in_update, s); + s->plld_in = qdev_init_clock_in(dev, "plld-in", dsi0hsck_mux_in_update, s); + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static const VMStateDescription dsi0hsck_mux_vmstate = { + .name = TYPE_CPRMAN_DSI0HSCK_MUX, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(plla_in, CprmanDsi0HsckMuxState), + VMSTATE_CLOCK(plld_in, CprmanDsi0HsckMuxState), + VMSTATE_END_OF_LIST() + } +}; + +static void dsi0hsck_mux_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &dsi0hsck_mux_vmstate; +} + +static const TypeInfo cprman_dsi0hsck_mux_info = { + .name = TYPE_CPRMAN_DSI0HSCK_MUX, + .parent = TYPE_DEVICE, + .instance_size = sizeof(CprmanDsi0HsckMuxState), + .class_init = dsi0hsck_mux_class_init, + .instance_init = dsi0hsck_mux_init, +}; + + /* CPRMAN "top level" model */ static uint32_t get_cm_lock(const BCM2835CprmanState *s) @@ -XXX,XX +XXX,XX @@ static void cprman_write(void *opaque, hwaddr offset, case R_CM_EMMC2CTL ... R_CM_EMMC2DIV: update_mux_from_cm(s, idx); break; + + case R_CM_DSI0HSCK: + dsi0hsck_mux_update(&s->dsi0hsck_mux); + break; } } @@ -XXX,XX +XXX,XX @@ static void cprman_reset(DeviceState *dev) device_cold_reset(DEVICE(&s->channels[i])); } + device_cold_reset(DEVICE(&s->dsi0hsck_mux)); + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { device_cold_reset(DEVICE(&s->clock_muxes[i])); } @@ -XXX,XX +XXX,XX @@ static void cprman_init(Object *obj) set_pll_channel_init_info(s, &s->channels[i], i); } + object_initialize_child(obj, "dsi0hsck-mux", + &s->dsi0hsck_mux, TYPE_CPRMAN_DSI0HSCK_MUX); + s->dsi0hsck_mux.reg_cm = &s->regs[R_CM_DSI0HSCK]; + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { char *alias; @@ -XXX,XX +XXX,XX @@ static void connect_mux_sources(BCM2835CprmanState *s, if (mapping == CPRMAN_CLOCK_SRC_FORCE_GROUND) { src = s->gnd; } else if (mapping == CPRMAN_CLOCK_SRC_DSI0HSCK) { - src = s->gnd; /* TODO */ + src = s->dsi0hsck_mux.out; } else if (i < CPRMAN_CLOCK_SRC_PLLA) { src = CLK_SRC_MAPPING[i]; } else { @@ -XXX,XX +XXX,XX @@ static void cprman_realize(DeviceState *dev, Error **errp) } } + clock_set_source(s->dsi0hsck_mux.plla_in, + s->channels[CPRMAN_PLLA_CHANNEL_DSI0].out); + clock_set_source(s->dsi0hsck_mux.plld_in, + s->channels[CPRMAN_PLLD_CHANNEL_DSI0].out); + + if (!qdev_realize(DEVICE(&s->dsi0hsck_mux), NULL, errp)) { + return; + } + for (i = 0; i < CPRMAN_NUM_CLOCK_MUX; i++) { CprmanClockMuxState *clock_mux = &s->clock_muxes[i]; @@ -XXX,XX +XXX,XX @@ static void cprman_register_types(void) type_register_static(&cprman_pll_info); type_register_static(&cprman_pll_channel_info); type_register_static(&cprman_clock_mux_info); + type_register_static(&cprman_dsi0hsck_mux_info); } type_init(cprman_register_types); -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Those reset values have been extracted from a Raspberry Pi 3 model B v1.2, using the 2020-08-20 version of raspios. The dump was done using the debugfs interface of the CPRMAN driver in Linux (under '/sys/kernel/debug/clk'). Each exposed clock tree stage (PLLs, channels and muxes) can be observed by reading the 'regdump' file (e.g. 'plla/regdump'). Those values are set by the Raspberry Pi firmware at boot time (Linux expects them to be set when it boots up). Some stages are not exposed by the Linux driver (e.g. the PLL B). For those, the reset values are unknown and left to 0 which implies a disabled output. Once booted in QEMU, the final clock tree is very similar to the one visible on real hardware. The differences come from some unimplemented devices for which the driver simply disable the corresponding clock. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/bcm2835_cprman_internals.h | 269 +++++++++++++++++++++ hw/misc/bcm2835_cprman.c | 31 +++ 2 files changed, 300 insertions(+) diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -XXX,XX +XXX,XX @@ static inline void set_clock_mux_init_info(BCM2835CprmanState *s, mux->frac_bits = CLOCK_MUX_INIT_INFO[id].frac_bits; } + +/* + * Object reset info + * Those values have been dumped from a Raspberry Pi 3 Model B v1.2 using the + * clk debugfs interface in Linux. + */ +typedef struct PLLResetInfo { + uint32_t cm; + uint32_t a2w_ctrl; + uint32_t a2w_ana[4]; + uint32_t a2w_frac; +} PLLResetInfo; + +static const PLLResetInfo PLL_RESET_INFO[] = { + [CPRMAN_PLLA] = { + .cm = 0x0000008a, + .a2w_ctrl = 0x0002103a, + .a2w_frac = 0x00098000, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLC] = { + .cm = 0x00000228, + .a2w_ctrl = 0x0002103e, + .a2w_frac = 0x00080000, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLD] = { + .cm = 0x0000020a, + .a2w_ctrl = 0x00021034, + .a2w_frac = 0x00015556, + .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 } + }, + + [CPRMAN_PLLH] = { + .cm = 0x00000000, + .a2w_ctrl = 0x0002102d, + .a2w_frac = 0x00000000, + .a2w_ana = { 0x00900000, 0x0000000c, 0x00000000, 0x00000000 } + }, + + [CPRMAN_PLLB] = { + /* unknown */ + .cm = 0x00000000, + .a2w_ctrl = 0x00000000, + .a2w_frac = 0x00000000, + .a2w_ana = { 0x00000000, 0x00000000, 0x00000000, 0x00000000 } + } +}; + +typedef struct PLLChannelResetInfo { + /* + * Even though a PLL channel has a CM register, it shares it with its + * parent PLL. The parent already takes care of the reset value. + */ + uint32_t a2w_ctrl; +} PLLChannelResetInfo; + +static const PLLChannelResetInfo PLL_CHANNEL_RESET_INFO[] = { + [CPRMAN_PLLA_CHANNEL_DSI0] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLA_CHANNEL_CORE] = { .a2w_ctrl = 0x00000003 }, + [CPRMAN_PLLA_CHANNEL_PER] = { .a2w_ctrl = 0x00000000 }, /* unknown */ + [CPRMAN_PLLA_CHANNEL_CCP2] = { .a2w_ctrl = 0x00000100 }, + + [CPRMAN_PLLC_CHANNEL_CORE2] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLC_CHANNEL_CORE1] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLC_CHANNEL_PER] = { .a2w_ctrl = 0x00000002 }, + [CPRMAN_PLLC_CHANNEL_CORE0] = { .a2w_ctrl = 0x00000002 }, + + [CPRMAN_PLLD_CHANNEL_DSI0] = { .a2w_ctrl = 0x00000100 }, + [CPRMAN_PLLD_CHANNEL_CORE] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLD_CHANNEL_PER] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLD_CHANNEL_DSI1] = { .a2w_ctrl = 0x00000100 }, + + [CPRMAN_PLLH_CHANNEL_AUX] = { .a2w_ctrl = 0x00000004 }, + [CPRMAN_PLLH_CHANNEL_RCAL] = { .a2w_ctrl = 0x00000000 }, + [CPRMAN_PLLH_CHANNEL_PIX] = { .a2w_ctrl = 0x00000000 }, + + [CPRMAN_PLLB_CHANNEL_ARM] = { .a2w_ctrl = 0x00000000 }, /* unknown */ +}; + +typedef struct ClockMuxResetInfo { + uint32_t cm_ctl; + uint32_t cm_div; +} ClockMuxResetInfo; + +static const ClockMuxResetInfo CLOCK_MUX_RESET_INFO[] = { + [CPRMAN_CLOCK_GNRIC] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_VPU] = { + .cm_ctl = 0x00000245, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_SYS] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_PERIA] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_PERII] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_H264] = { + .cm_ctl = 0x00000244, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_ISP] = { + .cm_ctl = 0x00000244, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_V3D] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_CAM0] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_CAM1] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_CCP2] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_DSI0E] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_DSI0P] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_DPI] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_GP0] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_GP1] = { + .cm_ctl = 0x00000096, + .cm_div = 0x00014000, + }, + + [CPRMAN_CLOCK_GP2] = { + .cm_ctl = 0x00000291, + .cm_div = 0x00249f00, + }, + + [CPRMAN_CLOCK_HSM] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_OTP] = { + .cm_ctl = 0x00000091, + .cm_div = 0x00004000, + }, + + [CPRMAN_CLOCK_PCM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_PWM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_SLIM] = { + .cm_ctl = 0x00000200, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_SMI] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_TEC] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_TD0] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_TD1] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_TSENS] = { + .cm_ctl = 0x00000091, + .cm_div = 0x0000a000, + }, + + [CPRMAN_CLOCK_TIMER] = { + .cm_ctl = 0x00000291, + .cm_div = 0x00013333, + }, + + [CPRMAN_CLOCK_UART] = { + .cm_ctl = 0x00000296, + .cm_div = 0x0000a6ab, + }, + + [CPRMAN_CLOCK_VEC] = { + .cm_ctl = 0x00000097, + .cm_div = 0x00002000, + }, + + [CPRMAN_CLOCK_PULSE] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_SDC] = { + .cm_ctl = 0x00004006, + .cm_div = 0x00003000, + }, + + [CPRMAN_CLOCK_ARM] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, + + [CPRMAN_CLOCK_AVEO] = { + .cm_ctl = 0x00000000, + .cm_div = 0x00000000, + }, + + [CPRMAN_CLOCK_EMMC] = { + .cm_ctl = 0x00000295, + .cm_div = 0x00006000, + }, + + [CPRMAN_CLOCK_EMMC2] = { + .cm_ctl = 0, /* unknown */ + .cm_div = 0 + }, +}; + #endif diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -XXX,XX +XXX,XX @@ /* PLL */ +static void pll_reset(DeviceState *dev) +{ + CprmanPllState *s = CPRMAN_PLL(dev); + const PLLResetInfo *info = &PLL_RESET_INFO[s->id]; + + *s->reg_cm = info->cm; + *s->reg_a2w_ctrl = info->a2w_ctrl; + memcpy(s->reg_a2w_ana, info->a2w_ana, sizeof(info->a2w_ana)); + *s->reg_a2w_frac = info->a2w_frac; +} + static bool pll_is_locked(const CprmanPllState *pll) { return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN) @@ -XXX,XX +XXX,XX @@ static void pll_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = pll_reset; dc->vmsd = &pll_vmstate; } @@ -XXX,XX +XXX,XX @@ static const TypeInfo cprman_pll_info = { /* PLL channel */ +static void pll_channel_reset(DeviceState *dev) +{ + CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(dev); + const PLLChannelResetInfo *info = &PLL_CHANNEL_RESET_INFO[s->id]; + + *s->reg_a2w_ctrl = info->a2w_ctrl; +} + static bool pll_channel_is_enabled(CprmanPllChannelState *channel) { /* @@ -XXX,XX +XXX,XX @@ static void pll_channel_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = pll_channel_reset; dc->vmsd = &pll_channel_vmstate; } @@ -XXX,XX +XXX,XX @@ static void clock_mux_src_update(void *opaque) clock_mux_update(s); } +static void clock_mux_reset(DeviceState *dev) +{ + CprmanClockMuxState *clock = CPRMAN_CLOCK_MUX(dev); + const ClockMuxResetInfo *info = &CLOCK_MUX_RESET_INFO[clock->id]; + + *clock->reg_ctl = info->cm_ctl; + *clock->reg_div = info->cm_div; +} + static void clock_mux_init(Object *obj) { CprmanClockMuxState *s = CPRMAN_CLOCK_MUX(obj); @@ -XXX,XX +XXX,XX @@ static void clock_mux_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->reset = clock_mux_reset; dc->vmsd = &clock_mux_vmstate; } -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Add a clock input to the PL011 UART so we can compute the current baud rate and trace it. This is intended for developers who wish to use QEMU to e.g. debug their firmware or to figure out the baud rate configured by an unknown/closed source binary. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/pl011.h | 1 + hw/char/pl011.c | 45 +++++++++++++++++++++++++++++++++++++++++ hw/char/trace-events | 1 + 3 files changed, 47 insertions(+) diff --git a/include/hw/char/pl011.h b/include/hw/char/pl011.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/pl011.h +++ b/include/hw/char/pl011.h @@ -XXX,XX +XXX,XX @@ struct PL011State { int read_trigger; CharBackend chr; qemu_irq irq[6]; + Clock *clk; const unsigned char *id; }; diff --git a/hw/char/pl011.c b/hw/char/pl011.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/pl011.c +++ b/hw/char/pl011.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/pl011.h" #include "hw/irq.h" #include "hw/sysbus.h" +#include "hw/qdev-clock.h" #include "migration/vmstate.h" #include "chardev/char-fe.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ static void pl011_set_read_trigger(PL011State *s) s->read_trigger = 1; } +static unsigned int pl011_get_baudrate(const PL011State *s) +{ + uint64_t clk; + + if (s->fbrd == 0) { + return 0; + } + + clk = clock_get_hz(s->clk); + return (clk / ((s->ibrd << 6) + s->fbrd)) << 2; +} + +static void pl011_trace_baudrate_change(const PL011State *s) +{ + trace_pl011_baudrate_change(pl011_get_baudrate(s), + clock_get_hz(s->clk), + s->ibrd, s->fbrd); +} + static void pl011_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void pl011_write(void *opaque, hwaddr offset, break; case 9: /* UARTIBRD */ s->ibrd = value; + pl011_trace_baudrate_change(s); break; case 10: /* UARTFBRD */ s->fbrd = value; + pl011_trace_baudrate_change(s); break; case 11: /* UARTLCR_H */ /* Reset the FIFO state on FIFO enable or disable */ @@ -XXX,XX +XXX,XX @@ static void pl011_event(void *opaque, QEMUChrEvent event) pl011_put_fifo(opaque, 0x400); } +static void pl011_clock_update(void *opaque) +{ + PL011State *s = PL011(opaque); + + pl011_trace_baudrate_change(s); +} + static const MemoryRegionOps pl011_ops = { .read = pl011_read, .write = pl011_write, .endianness = DEVICE_NATIVE_ENDIAN, }; +static const VMStateDescription vmstate_pl011_clock = { + .name = "pl011/clock", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_CLOCK(clk, PL011State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_pl011 = { .name = "pl011", .version_id = 2, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pl011 = { VMSTATE_INT32(read_count, PL011State), VMSTATE_INT32(read_trigger, PL011State), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_pl011_clock, + NULL } }; @@ -XXX,XX +XXX,XX @@ static void pl011_init(Object *obj) sysbus_init_irq(sbd, &s->irq[i]); } + s->clk = qdev_init_clock_in(DEVICE(obj), "clk", pl011_clock_update, s); + s->read_trigger = 1; s->ifl = 0x12; s->cr = 0x300; diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ pl011_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR 0x%08x read_count %d returning %d" pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d" pl011_put_fifo_full(void) "FIFO now full, RXFF set" +pl011_baudrate_change(unsigned int baudrate, uint64_t clock, uint32_t ibrd, uint32_t fbrd) "new baudrate %u (clk: %" PRIu64 "hz, ibrd: %" PRIu32 ", fbrd: %" PRIu32 ")" # cmsdk-apb-uart.c cmsdk_apb_uart_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.20.1 From: Luc Michel <luc@lmichel.fr> Connect the 'uart-out' clock from the CPRMAN to the PL011 instance. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2835_peripherals.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) } memory_region_add_subregion(&s->peri_mr, CPRMAN_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cprman), 0)); + qdev_connect_clock_in(DEVICE(&s->uart0), "clk", + qdev_get_clock_out(DEVICE(&s->cprman), "uart-out")); memory_region_add_subregion(&s->peri_mr, ARMCTRL_IC_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ic), 0)); -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Generic watchdog device model implementation as per ARM SBSA v6.0 Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Message-id: 20201027015927.29495-2-shashi.mallela@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/sbsa_gwdt.h | 79 +++++++++ hw/watchdog/sbsa_gwdt.c | 293 ++++++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/watchdog/Kconfig | 3 + hw/watchdog/meson.build | 1 + 5 files changed, 377 insertions(+) create mode 100644 include/hw/watchdog/sbsa_gwdt.h create mode 100644 hw/watchdog/sbsa_gwdt.c diff --git a/include/hw/watchdog/sbsa_gwdt.h b/include/hw/watchdog/sbsa_gwdt.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/watchdog/sbsa_gwdt.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2020 Linaro Limited + * + * Authors: + * Shashi Mallela <shashi.mallela@linaro.org> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + +#ifndef WDT_SBSA_GWDT_H +#define WDT_SBSA_GWDT_H + +#include "qemu/bitops.h" +#include "hw/sysbus.h" +#include "hw/irq.h" + +#define TYPE_WDT_SBSA "sbsa_gwdt" +#define SBSA_GWDT(obj) \ + OBJECT_CHECK(SBSA_GWDTState, (obj), TYPE_WDT_SBSA) +#define SBSA_GWDT_CLASS(klass) \ + OBJECT_CLASS_CHECK(SBSA_GWDTClass, (klass), TYPE_WDT_SBSA) +#define SBSA_GWDT_GET_CLASS(obj) \ + OBJECT_GET_CLASS(SBSA_GWDTClass, (obj), TYPE_WDT_SBSA) + +/* SBSA Generic Watchdog register definitions */ +/* refresh frame */ +#define SBSA_GWDT_WRR 0x000 + +/* control frame */ +#define SBSA_GWDT_WCS 0x000 +#define SBSA_GWDT_WOR 0x008 +#define SBSA_GWDT_WORU 0x00C +#define SBSA_GWDT_WCV 0x010 +#define SBSA_GWDT_WCVU 0x014 + +/* Watchdog Interface Identification Register */ +#define SBSA_GWDT_W_IIDR 0xFCC + +/* Watchdog Control and Status Register Bits */ +#define SBSA_GWDT_WCS_EN BIT(0) +#define SBSA_GWDT_WCS_WS0 BIT(1) +#define SBSA_GWDT_WCS_WS1 BIT(2) + +#define SBSA_GWDT_WOR_MASK 0x0000FFFF + +/* + * Watchdog Interface Identification Register definition + * considering JEP106 code for ARM in Bits [11:0] + */ +#define SBSA_GWDT_ID 0x1043B + +/* 2 Separate memory regions for each of refresh & control register frames */ +#define SBSA_GWDT_RMMIO_SIZE 0x1000 +#define SBSA_GWDT_CMMIO_SIZE 0x1000 + +#define SBSA_TIMER_FREQ 62500000 /* Hz */ + +typedef struct SBSA_GWDTState { + /* <private> */ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion rmmio; + MemoryRegion cmmio; + qemu_irq irq; + + QEMUTimer *timer; + + uint32_t id; + uint32_t wcs; + uint32_t worl; + uint32_t woru; + uint32_t wcvl; + uint32_t wcvu; +} SBSA_GWDTState; + +#endif /* WDT_SBSA_GWDT_H */ diff --git a/hw/watchdog/sbsa_gwdt.c b/hw/watchdog/sbsa_gwdt.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/watchdog/sbsa_gwdt.c @@ -XXX,XX +XXX,XX @@ +/* + * Generic watchdog device model for SBSA + * + * The watchdog device has been implemented as revision 1 variant of + * the ARM SBSA specification v6.0 + * (https://developer.arm.com/documentation/den0029/d?lang=en) + * + * Copyright Linaro.org 2020 + * + * Authors: + * Shashi Mallela <shashi.mallela@linaro.org> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "sysemu/reset.h" +#include "sysemu/watchdog.h" +#include "hw/watchdog/sbsa_gwdt.h" +#include "qemu/timer.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" + +static WatchdogTimerModel model = { + .wdt_name = TYPE_WDT_SBSA, + .wdt_description = "SBSA-compliant generic watchdog device", +}; + +static const VMStateDescription vmstate_sbsa_gwdt = { + .name = "sbsa-gwdt", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_TIMER_PTR(timer, SBSA_GWDTState), + VMSTATE_UINT32(wcs, SBSA_GWDTState), + VMSTATE_UINT32(worl, SBSA_GWDTState), + VMSTATE_UINT32(woru, SBSA_GWDTState), + VMSTATE_UINT32(wcvl, SBSA_GWDTState), + VMSTATE_UINT32(wcvu, SBSA_GWDTState), + VMSTATE_END_OF_LIST() + } +}; + +typedef enum WdtRefreshType { + EXPLICIT_REFRESH = 0, + TIMEOUT_REFRESH = 1, +} WdtRefreshType; + +static uint64_t sbsa_gwdt_rread(void *opaque, hwaddr addr, unsigned int size) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + uint32_t ret = 0; + + switch (addr) { + case SBSA_GWDT_WRR: + /* watch refresh read has no effect and returns 0 */ + ret = 0; + break; + case SBSA_GWDT_W_IIDR: + ret = s->id; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in refresh frame read :" + " 0x%x\n", (int)addr); + } + return ret; +} + +static uint64_t sbsa_gwdt_read(void *opaque, hwaddr addr, unsigned int size) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + uint32_t ret = 0; + + switch (addr) { + case SBSA_GWDT_WCS: + ret = s->wcs; + break; + case SBSA_GWDT_WOR: + ret = s->worl; + break; + case SBSA_GWDT_WORU: + ret = s->woru; + break; + case SBSA_GWDT_WCV: + ret = s->wcvl; + break; + case SBSA_GWDT_WCVU: + ret = s->wcvu; + break; + case SBSA_GWDT_W_IIDR: + ret = s->id; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in control frame read :" + " 0x%x\n", (int)addr); + } + return ret; +} + +static void sbsa_gwdt_update_timer(SBSA_GWDTState *s, WdtRefreshType rtype) +{ + uint64_t timeout = 0; + + timer_del(s->timer); + + if (s->wcs & SBSA_GWDT_WCS_EN) { + /* + * Extract the upper 16 bits from woru & 32 bits from worl + * registers to construct the 48 bit offset value + */ + timeout = s->woru; + timeout <<= 32; + timeout |= s->worl; + timeout = muldiv64(timeout, NANOSECONDS_PER_SECOND, SBSA_TIMER_FREQ); + timeout += qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + if ((rtype == EXPLICIT_REFRESH) || ((rtype == TIMEOUT_REFRESH) && + (!(s->wcs & SBSA_GWDT_WCS_WS0)))) { + /* store the current timeout value into compare registers */ + s->wcvu = timeout >> 32; + s->wcvl = timeout; + } + timer_mod(s->timer, timeout); + } +} + +static void sbsa_gwdt_rwrite(void *opaque, hwaddr offset, uint64_t data, + unsigned size) { + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + if (offset == SBSA_GWDT_WRR) { + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "bad address in refresh frame write :" + " 0x%x\n", (int)offset); + } +} + +static void sbsa_gwdt_write(void *opaque, hwaddr offset, uint64_t data, + unsigned size) { + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + switch (offset) { + case SBSA_GWDT_WCS: + s->wcs = data & SBSA_GWDT_WCS_EN; + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WOR: + s->worl = data; + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WORU: + s->woru = data & SBSA_GWDT_WOR_MASK; + s->wcs &= ~(SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_WS1); + qemu_set_irq(s->irq, 0); + sbsa_gwdt_update_timer(s, EXPLICIT_REFRESH); + break; + + case SBSA_GWDT_WCV: + s->wcvl = data; + break; + + case SBSA_GWDT_WCVU: + s->wcvu = data; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, "bad address in control frame write :" + " 0x%x\n", (int)offset); + } + return; +} + +static void wdt_sbsa_gwdt_reset(DeviceState *dev) +{ + SBSA_GWDTState *s = SBSA_GWDT(dev); + + timer_del(s->timer); + + s->wcs = 0; + s->wcvl = 0; + s->wcvu = 0; + s->worl = 0; + s->woru = 0; + s->id = SBSA_GWDT_ID; +} + +static void sbsa_gwdt_timer_sysinterrupt(void *opaque) +{ + SBSA_GWDTState *s = SBSA_GWDT(opaque); + + if (!(s->wcs & SBSA_GWDT_WCS_WS0)) { + s->wcs |= SBSA_GWDT_WCS_WS0; + sbsa_gwdt_update_timer(s, TIMEOUT_REFRESH); + qemu_set_irq(s->irq, 1); + } else { + s->wcs |= SBSA_GWDT_WCS_WS1; + qemu_log_mask(CPU_LOG_RESET, "Watchdog timer expired.\n"); + /* + * Reset the watchdog only if the guest gets notified about + * expiry. watchdog_perform_action() may temporarily relinquish + * the BQL; reset before triggering the action to avoid races with + * sbsa_gwdt instructions. + */ + switch (get_watchdog_action()) { + case WATCHDOG_ACTION_DEBUG: + case WATCHDOG_ACTION_NONE: + case WATCHDOG_ACTION_PAUSE: + break; + default: + wdt_sbsa_gwdt_reset(DEVICE(s)); + } + watchdog_perform_action(); + } +} + +static const MemoryRegionOps sbsa_gwdt_rops = { + .read = sbsa_gwdt_rread, + .write = sbsa_gwdt_rwrite, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .valid.unaligned = false, +}; + +static const MemoryRegionOps sbsa_gwdt_ops = { + .read = sbsa_gwdt_read, + .write = sbsa_gwdt_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .valid.unaligned = false, +}; + +static void wdt_sbsa_gwdt_realize(DeviceState *dev, Error **errp) +{ + SBSA_GWDTState *s = SBSA_GWDT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + memory_region_init_io(&s->rmmio, OBJECT(dev), + &sbsa_gwdt_rops, s, + "sbsa_gwdt.refresh", + SBSA_GWDT_RMMIO_SIZE); + + memory_region_init_io(&s->cmmio, OBJECT(dev), + &sbsa_gwdt_ops, s, + "sbsa_gwdt.control", + SBSA_GWDT_CMMIO_SIZE); + + sysbus_init_mmio(sbd, &s->rmmio); + sysbus_init_mmio(sbd, &s->cmmio); + + sysbus_init_irq(sbd, &s->irq); + + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sbsa_gwdt_timer_sysinterrupt, + dev); +} + +static void wdt_sbsa_gwdt_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = wdt_sbsa_gwdt_realize; + dc->reset = wdt_sbsa_gwdt_reset; + dc->hotpluggable = false; + set_bit(DEVICE_CATEGORY_MISC, dc->categories); + dc->vmsd = &vmstate_sbsa_gwdt; +} + +static const TypeInfo wdt_sbsa_gwdt_info = { + .class_init = wdt_sbsa_gwdt_class_init, + .parent = TYPE_SYS_BUS_DEVICE, + .name = TYPE_WDT_SBSA, + .instance_size = sizeof(SBSA_GWDTState), +}; + +static void wdt_sbsa_gwdt_register_types(void) +{ + watchdog_add_model(&model); + type_register_static(&wdt_sbsa_gwdt_info); +} + +type_init(wdt_sbsa_gwdt_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config SBSA_REF select PL031 # RTC select PL061 # GPIO select USB_EHCI_SYSBUS + select WDT_SBSA config SABRELITE bool diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Kconfig +++ b/hw/watchdog/Kconfig @@ -XXX,XX +XXX,XX @@ config WDT_DIAG288 config WDT_IMX2 bool + +config WDT_SBSA + bool diff --git a/hw/watchdog/meson.build b/hw/watchdog/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/meson.build +++ b/hw/watchdog/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_WDT_IB700', if_true: files('wdt_ib700.c')) softmmu_ss.add(when: 'CONFIG_WDT_DIAG288', if_true: files('wdt_diag288.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('wdt_aspeed.c')) softmmu_ss.add(when: 'CONFIG_WDT_IMX2', if_true: files('wdt_imx2.c')) +softmmu_ss.add(when: 'CONFIG_WDT_SBSA', if_true: files('sbsa_gwdt.c')) -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Included the newly implemented SBSA generic watchdog device model into SBSA platform Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201027015927.29495-3-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/usb.h" #include "hw/char/pl011.h" +#include "hw/watchdog/sbsa_gwdt.h" #include "net/net.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ enum { SBSA_GIC_DIST, SBSA_GIC_REDIST, SBSA_SECURE_EC, + SBSA_GWDT, + SBSA_GWDT_REFRESH, + SBSA_GWDT_CONTROL, SBSA_SMMU, SBSA_UART, SBSA_RTC, @@ -XXX,XX +XXX,XX @@ static const MemMapEntry sbsa_ref_memmap[] = { [SBSA_GIC_DIST] = { 0x40060000, 0x00010000 }, [SBSA_GIC_REDIST] = { 0x40080000, 0x04000000 }, [SBSA_SECURE_EC] = { 0x50000000, 0x00001000 }, + [SBSA_GWDT_REFRESH] = { 0x50010000, 0x00001000 }, + [SBSA_GWDT_CONTROL] = { 0x50011000, 0x00001000 }, [SBSA_UART] = { 0x60000000, 0x00001000 }, [SBSA_RTC] = { 0x60010000, 0x00001000 }, [SBSA_GPIO] = { 0x60020000, 0x00001000 }, @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { [SBSA_AHCI] = 10, [SBSA_EHCI] = 11, [SBSA_SMMU] = 12, /* ... to 15 */ + [SBSA_GWDT] = 16, }; static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx) @@ -XXX,XX +XXX,XX @@ static void create_rtc(const SBSAMachineState *sms) sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic, irq)); } +static void create_wdt(const SBSAMachineState *sms) +{ + hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base; + hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base; + DeviceState *dev = qdev_new(TYPE_WDT_SBSA); + SysBusDevice *s = SYS_BUS_DEVICE(dev); + int irq = sbsa_ref_irqmap[SBSA_GWDT]; + + sysbus_realize_and_unref(s, &error_fatal); + sysbus_mmio_map(s, 0, rbase); + sysbus_mmio_map(s, 1, cbase); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq)); +} + static DeviceState *gpio_key_dev; static void sbsa_ref_powerdown_req(Notifier *n, void *opaque) { @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) create_rtc(sms); + create_wdt(sms); + create_gpio(sms); create_ahci(sms); -- 2.20.1 In ptimer_reload(), we call the callback function provided by the timer device that is using the ptimer. This callback might disable the ptimer. The code mostly handles this correctly, except that we'll still print the warning about "Timer with delta zero, disabling" if the now-disabled timer happened to be set such that it would fire again immediately if it were enabled (eg because the limit/reload value is zero). Suppress the spurious warning message and the unnecessary repeat-deletion of the underlying timer in this case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20201015151829.14656-2-peter.maydell@linaro.org --- hw/core/ptimer.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ static void ptimer_reload(ptimer_state *s, int delta_adjust) } if (delta == 0) { + if (s->enabled == 0) { + /* trigger callback disabled the timer already */ + return; + } if (!qtest_enabled()) { fprintf(stderr, "Timer with delta zero, disabling\n"); } -- 2.20.1 The armv7m systick timer is a 24-bit decrementing, wrap-on-zero, clear-on-write counter. Our current implementation has various bugs and dubious workarounds in it (for instance see https://bugs.launchpad.net/qemu/+bug/1872237). We have an implementation of a simple decrementing counter and we put a lot of effort into making sure it handles the interesting corner cases (like "spend a cycle at 0 before reloading") -- ptimer. Rewrite the systick timer to use a ptimer rather than a raw QEMU timer. Unfortunately this is a migration compatibility break, which will affect all M-profile boards. Among other bugs, this fixes https://bugs.launchpad.net/qemu/+bug/1872237 : now writes to SYST_CVR when the timer is enabled correctly do nothing; when the timer is enabled via SYST_CSR.ENABLE, the ptimer code will (because of POLICY_NO_IMMEDIATE_RELOAD) arrange that after one timer tick the counter is reloaded from SYST_RVR and then counts down from there, as the architecture requires. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201015151829.14656-3-peter.maydell@linaro.org --- include/hw/timer/armv7m_systick.h | 3 +- hw/timer/armv7m_systick.c | 124 +++++++++++++----------------- 2 files changed, 54 insertions(+), 73 deletions(-) diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/armv7m_systick.h +++ b/include/hw/timer/armv7m_systick.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qom/object.h" +#include "hw/ptimer.h" #define TYPE_SYSTICK "armv7m_systick" @@ -XXX,XX +XXX,XX @@ struct SysTickState { uint32_t control; uint32_t reload; int64_t tick; - QEMUTimer *timer; + ptimer_state *ptimer; MemoryRegion iomem; qemu_irq irq; }; diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/armv7m_systick.c +++ b/hw/timer/armv7m_systick.c @@ -XXX,XX +XXX,XX @@ static inline int64_t systick_scale(SysTickState *s) } } -static void systick_reload(SysTickState *s, int reset) -{ - /* The Cortex-M3 Devices Generic User Guide says that "When the - * ENABLE bit is set to 1, the counter loads the RELOAD value from the - * SYST RVR register and then counts down". So, we need to check the - * ENABLE bit before reloading the value. - */ - trace_systick_reload(); - - if ((s->control & SYSTICK_ENABLE) == 0) { - return; - } - - if (reset) { - s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - } - s->tick += (s->reload + 1) * systick_scale(s); - timer_mod(s->timer, s->tick); -} - static void systick_timer_tick(void *opaque) { SysTickState *s = (SysTickState *)opaque; @@ -XXX,XX +XXX,XX @@ static void systick_timer_tick(void *opaque) /* Tell the NVIC to pend the SysTick exception */ qemu_irq_pulse(s->irq); } - if (s->reload == 0) { - s->control &= ~SYSTICK_ENABLE; - } else { - systick_reload(s, 0); + if (ptimer_get_limit(s->ptimer) == 0) { + /* + * Timer expiry with SYST_RVR zero disables the timer + * (but doesn't clear SYST_CSR.ENABLE) + */ + ptimer_stop(s->ptimer); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult systick_read(void *opaque, hwaddr addr, uint64_t *data, s->control &= ~SYSTICK_COUNTFLAG; break; case 0x4: /* SysTick Reload Value. */ - val = s->reload; + val = ptimer_get_limit(s->ptimer); break; case 0x8: /* SysTick Current Value. */ - { - int64_t t; - - if ((s->control & SYSTICK_ENABLE) == 0) { - val = 0; - break; - } - t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (t >= s->tick) { - val = 0; - break; - } - val = ((s->tick - (t + 1)) / systick_scale(s)) + 1; - /* The interrupt in triggered when the timer reaches zero. - However the counter is not reloaded until the next clock - tick. This is a hack to return zero during the first tick. */ - if (val > s->reload) { - val = 0; - } + val = ptimer_get_count(s->ptimer); break; - } case 0xc: /* SysTick Calibration Value. */ val = 10000; break; @@ -XXX,XX +XXX,XX @@ static MemTxResult systick_write(void *opaque, hwaddr addr, switch (addr) { case 0x0: /* SysTick Control and Status. */ { - uint32_t oldval = s->control; + uint32_t oldval; + ptimer_transaction_begin(s->ptimer); + oldval = s->control; s->control &= 0xfffffff8; s->control |= value & 7; + if ((oldval ^ value) & SYSTICK_ENABLE) { - int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); if (value & SYSTICK_ENABLE) { - if (s->tick) { - s->tick += now; - timer_mod(s->timer, s->tick); - } else { - systick_reload(s, 1); - } + /* + * Always reload the period in case board code has + * changed system_clock_scale. If we ever replace that + * global with a more sensible API then we might be able + * to set the period only when it actually changes. + */ + ptimer_set_period(s->ptimer, systick_scale(s)); + ptimer_run(s->ptimer, 0); } else { - timer_del(s->timer); - s->tick -= now; - if (s->tick < 0) { - s->tick = 0; - } + ptimer_stop(s->ptimer); } } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { - /* This is a hack. Force the timer to be reloaded - when the reference clock is changed. */ - systick_reload(s, 1); + ptimer_set_period(s->ptimer, systick_scale(s)); } + ptimer_transaction_commit(s->ptimer); break; } case 0x4: /* SysTick Reload Value. */ - s->reload = value; + ptimer_transaction_begin(s->ptimer); + ptimer_set_limit(s->ptimer, value & 0xffffff, 0); + ptimer_transaction_commit(s->ptimer); break; - case 0x8: /* SysTick Current Value. Writes reload the timer. */ - systick_reload(s, 1); + case 0x8: /* SysTick Current Value. */ + /* + * Writing any value clears SYST_CVR to zero and clears + * SYST_CSR.COUNTFLAG. The counter will then reload from SYST_RVR + * on the next clock edge unless SYST_RVR is zero. + */ + ptimer_transaction_begin(s->ptimer); + if (ptimer_get_limit(s->ptimer) == 0) { + ptimer_stop(s->ptimer); + } + ptimer_set_count(s->ptimer, 0); s->control &= ~SYSTICK_COUNTFLAG; + ptimer_transaction_commit(s->ptimer); break; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void systick_reset(DeviceState *dev) */ assert(system_clock_scale != 0); + ptimer_transaction_begin(s->ptimer); s->control = 0; - s->reload = 0; - s->tick = 0; - timer_del(s->timer); + ptimer_stop(s->ptimer); + ptimer_set_count(s->ptimer, 0); + ptimer_set_limit(s->ptimer, 0, 0); + ptimer_set_period(s->ptimer, systick_scale(s)); + ptimer_transaction_commit(s->ptimer); } static void systick_instance_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void systick_instance_init(Object *obj) static void systick_realize(DeviceState *dev, Error **errp) { SysTickState *s = SYSTICK(dev); - s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); + s->ptimer = ptimer_init(systick_timer_tick, s, + PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT); } static const VMStateDescription vmstate_systick = { .name = "armv7m_systick", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(control, SysTickState), - VMSTATE_UINT32(reload, SysTickState), VMSTATE_INT64(tick, SysTickState), - VMSTATE_TIMER_PTR(timer, SysTickState), + VMSTATE_PTIMER(ptimer, SysTickState), VMSTATE_END_OF_LIST() } }; -- 2.20.1