1
Arm patches for rc3 : just a handful of bug fixes.
1
v2:
2
2
* dropped target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]
3
thanks
3
* renamed CLOCK_SECOND to CLOCK_PERIOD_1SEC
4
-- PMM
5
4
6
5
7
The following changes since commit 4ecc984210ca1bf508a96a550ec8a93a5f833f6c:
6
The following changes since commit 648db19685b7030aa558a4ddbd3a8e53d8c9a062:
8
7
9
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-rc3' into staging (2019-11-26 12:36:40 +0000)
8
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2020-04-29' into staging (2020-04-29 15:07:33 +0100)
10
9
11
are available in the Git repository at:
10
are available in the Git repository at:
12
11
13
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191126
12
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200430-1
14
13
15
for you to fetch changes up to 6a4ef4e5d1084ce41fafa7d470a644b0fd3d9317:
14
for you to fetch changes up to 6f7b6947a6639fff15c6a0956adf0f5ec004b789:
16
15
17
target/arm: Honor HCR_EL2.TID3 trapping requirements (2019-11-26 13:55:37 +0000)
16
hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes (2020-04-30 15:35:41 +0100)
18
17
19
----------------------------------------------------------------
18
----------------------------------------------------------------
20
target-arm queue:
19
target-arm queue:
21
* handle FTYPE flag correctly in v7M exception return
20
* xlnx-zdma: Fix endianness handling of descriptor loading
22
for v7M CPUs with an FPU (v8M CPUs were already correct)
21
* nrf51: Fix last GPIO CNF address
23
* versal: Add the CRP as unimplemented
22
* gicv3: Use gicr_typer in arm_gicv3_icc_reset
24
* Fix ISR_EL1 tracking when executing at EL2
23
* msf2: Add EMAC block to SmartFusion2 SoC
25
* Honor HCR_EL2.TID3 trapping requirements
24
* New clock modelling framework
25
* hw/arm: versal: Setup the ADMA with 128bit bus-width
26
* Cadence: gem: fix wraparound in 64bit descriptors
27
* cadence_gem: clear RX control descriptor
28
* target/arm: Vectorize integer comparison vs zero
29
* hw/arm/virt: dt: add kaslr-seed property
30
* hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes
26
31
27
----------------------------------------------------------------
32
----------------------------------------------------------------
28
Edgar E. Iglesias (1):
33
Cameron Esfahani (1):
29
hw/arm: versal: Add the CRP as unimplemented
34
nrf51: Fix last GPIO CNF address
30
35
31
Jean-Hugues Deschênes (1):
36
Damien Hedde (7):
32
target/arm: Fix handling of cortex-m FTYPE flag in EXCRET
37
hw/core/clock-vmstate: define a vmstate entry for clock state
38
qdev: add clock input&output support to devices.
39
qdev-clock: introduce an init array to ease the device construction
40
hw/misc/zynq_slcr: add clock generation for uarts
41
hw/char/cadence_uart: add clock support
42
hw/arm/xilinx_zynq: connect uart clocks to slcr
43
qdev-monitor: print the device's clock with info qtree
33
44
34
Marc Zyngier (2):
45
Edgar E. Iglesias (7):
35
target/arm: Fix ISR_EL1 tracking when executing at EL2
46
dma/xlnx-zdma: Fix descriptor loading (MEM) wrt endianness
36
target/arm: Honor HCR_EL2.TID3 trapping requirements
47
dma/xlnx-zdma: Fix descriptor loading (REG) wrt endianness
48
hw/arm: versal: Setup the ADMA with 128bit bus-width
49
device_tree: Allow name wildcards in qemu_fdt_node_path()
50
device_tree: Constify compat in qemu_fdt_node_path()
51
hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102
52
hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes
37
53
38
include/hw/arm/xlnx-versal.h | 3 ++
54
Jerome Forissier (2):
39
hw/arm/xlnx-versal.c | 2 ++
55
hw/arm/virt: dt: move creation of /secure-chosen to create_fdt()
40
target/arm/helper.c | 83 ++++++++++++++++++++++++++++++++++++++++++--
56
hw/arm/virt: dt: add kaslr-seed property
41
target/arm/m_helper.c | 7 ++--
42
4 files changed, 89 insertions(+), 6 deletions(-)
43
57
58
Keqian Zhu (2):
59
bugfix: Use gicr_typer in arm_gicv3_icc_reset
60
Typo: Correct the name of CPU hotplug memory region
61
62
Peter Maydell (2):
63
hw/core/clock: introduce clock object
64
docs/clocks: add device's clock documentation
65
66
Philippe Mathieu-Daudé (2):
67
target/arm: Restrict the Address Translate write operation to TCG accel
68
target/arm/cpu: Update coding style to make checkpatch.pl happy
69
70
Ramon Fried (2):
71
Cadence: gem: fix wraparound in 64bit descriptors
72
net: cadence_gem: clear RX control descriptor
73
74
Richard Henderson (1):
75
target/arm: Vectorize integer comparison vs zero
76
77
Subbaraya Sundeep (3):
78
hw/net: Add Smartfusion2 emac block
79
msf2: Add EMAC block to SmartFusion2 SoC
80
tests/boot_linux_console: Add ethernet test to SmartFusion2
81
82
Thomas Huth (1):
83
target/arm: Make cpu_register() available for other files
84
85
hw/core/Makefile.objs | 2 +
86
hw/net/Makefile.objs | 1 +
87
tests/Makefile.include | 1 +
88
include/hw/arm/msf2-soc.h | 2 +
89
include/hw/char/cadence_uart.h | 1 +
90
include/hw/clock.h | 225 +++++++++++++
91
include/hw/gpio/nrf51_gpio.h | 2 +-
92
include/hw/net/msf2-emac.h | 53 +++
93
include/hw/qdev-clock.h | 159 +++++++++
94
include/hw/qdev-core.h | 12 +
95
include/sysemu/device_tree.h | 5 +-
96
target/arm/cpu-qom.h | 9 +-
97
target/arm/helper.h | 27 +-
98
target/arm/translate.h | 5 +
99
device_tree.c | 4 +-
100
hw/acpi/cpu.c | 2 +-
101
hw/arm/msf2-soc.c | 26 +-
102
hw/arm/virt.c | 20 +-
103
hw/arm/xilinx_zynq.c | 57 +++-
104
hw/arm/xlnx-versal.c | 2 +
105
hw/arm/xlnx-zcu102.c | 39 ++-
106
hw/char/cadence_uart.c | 73 +++-
107
hw/core/clock-vmstate.c | 25 ++
108
hw/core/clock.c | 130 ++++++++
109
hw/core/qdev-clock.c | 185 +++++++++++
110
hw/core/qdev.c | 12 +
111
hw/dma/xlnx-zdma.c | 25 +-
112
hw/intc/arm_gicv3_kvm.c | 4 +-
113
hw/misc/zynq_slcr.c | 172 +++++++++-
114
hw/net/cadence_gem.c | 16 +-
115
hw/net/msf2-emac.c | 589 +++++++++++++++++++++++++++++++++
116
qdev-monitor.c | 9 +
117
target/arm/cpu.c | 19 +-
118
target/arm/cpu64.c | 8 +-
119
target/arm/helper.c | 17 +
120
target/arm/neon_helper.c | 24 --
121
target/arm/translate-a64.c | 64 +---
122
target/arm/translate.c | 256 ++++++++++++--
123
target/arm/vec_helper.c | 25 ++
124
MAINTAINERS | 2 +
125
docs/devel/clocks.rst | 391 ++++++++++++++++++++++
126
docs/devel/index.rst | 1 +
127
hw/char/trace-events | 3 +
128
hw/core/trace-events | 7 +
129
tests/acceptance/boot_linux_console.py | 15 +-
130
45 files changed, 2533 insertions(+), 193 deletions(-)
131
create mode 100644 include/hw/clock.h
132
create mode 100644 include/hw/net/msf2-emac.h
133
create mode 100644 include/hw/qdev-clock.h
134
create mode 100644 hw/core/clock-vmstate.c
135
create mode 100644 hw/core/clock.c
136
create mode 100644 hw/core/qdev-clock.c
137
create mode 100644 hw/net/msf2-emac.c
138
create mode 100644 docs/devel/clocks.rst
139
diff view generated by jsdifflib
Deleted patch
1
From: Jean-Hugues Deschênes <Jean-Hugues.Deschenes@ossiaco.com>
2
1
3
According to the PushStack() pseudocode in the armv7m RM,
4
bit 4 of the LR should be set to NOT(CONTROL.PFCA) when
5
an FPU is present. Current implementation is doing it for
6
armv8, but not for armv7. This patch makes the existing
7
logic applicable to both code paths.
8
9
Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@ossiaco.com>
10
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
12
---
13
target/arm/m_helper.c | 7 +++----
14
1 file changed, 3 insertions(+), 4 deletions(-)
15
16
diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c
17
index XXXXXXX..XXXXXXX 100644
18
--- a/target/arm/m_helper.c
19
+++ b/target/arm/m_helper.c
20
@@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
21
if (env->v7m.secure) {
22
lr |= R_V7M_EXCRET_S_MASK;
23
}
24
- if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) {
25
- lr |= R_V7M_EXCRET_FTYPE_MASK;
26
- }
27
} else {
28
lr = R_V7M_EXCRET_RES1_MASK |
29
R_V7M_EXCRET_S_MASK |
30
R_V7M_EXCRET_DCRS_MASK |
31
- R_V7M_EXCRET_FTYPE_MASK |
32
R_V7M_EXCRET_ES_MASK;
33
if (env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK) {
34
lr |= R_V7M_EXCRET_SPSEL_MASK;
35
}
36
}
37
+ if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) {
38
+ lr |= R_V7M_EXCRET_FTYPE_MASK;
39
+ }
40
if (!arm_v7m_is_handler_mode(env)) {
41
lr |= R_V7M_EXCRET_MODE_MASK;
42
}
43
--
44
2.20.1
45
46
diff view generated by jsdifflib
Deleted patch
1
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
2
1
3
Add the CRP as unimplemented thus avoiding bus errors when
4
guests access these registers.
5
6
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
7
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
8
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
9
Message-id: 20191115154734.26449-2-edgar.iglesias@gmail.com
10
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
11
---
12
include/hw/arm/xlnx-versal.h | 3 +++
13
hw/arm/xlnx-versal.c | 2 ++
14
2 files changed, 5 insertions(+)
15
16
diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
17
index XXXXXXX..XXXXXXX 100644
18
--- a/include/hw/arm/xlnx-versal.h
19
+++ b/include/hw/arm/xlnx-versal.h
20
@@ -XXX,XX +XXX,XX @@ typedef struct Versal {
21
#define MM_IOU_SCNTRS_SIZE 0x10000
22
#define MM_FPD_CRF 0xfd1a0000U
23
#define MM_FPD_CRF_SIZE 0x140000
24
+
25
+#define MM_PMC_CRP 0xf1260000U
26
+#define MM_PMC_CRP_SIZE 0x10000
27
#endif
28
diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
29
index XXXXXXX..XXXXXXX 100644
30
--- a/hw/arm/xlnx-versal.c
31
+++ b/hw/arm/xlnx-versal.c
32
@@ -XXX,XX +XXX,XX @@ static void versal_unimp(Versal *s)
33
MM_CRL, MM_CRL_SIZE);
34
versal_unimp_area(s, "crf", &s->mr_ps,
35
MM_FPD_CRF, MM_FPD_CRF_SIZE);
36
+ versal_unimp_area(s, "crp", &s->mr_ps,
37
+ MM_PMC_CRP, MM_PMC_CRP_SIZE);
38
versal_unimp_area(s, "iou-scntr", &s->mr_ps,
39
MM_IOU_SCNTR, MM_IOU_SCNTR_SIZE);
40
versal_unimp_area(s, "iou-scntr-seucre", &s->mr_ps,
41
--
42
2.20.1
43
44
diff view generated by jsdifflib
Deleted patch
1
From: Marc Zyngier <maz@kernel.org>
2
1
3
The ARMv8 ARM states when executing at EL2, EL3 or Secure EL1,
4
ISR_EL1 shows the pending status of the physical IRQ, FIQ, or
5
SError interrupts.
6
7
Unfortunately, QEMU's implementation only considers the HCR_EL2
8
bits, and ignores the current exception level. This means a hypervisor
9
trying to look at its own interrupt state actually sees the guest
10
state, which is unexpected and breaks KVM as of Linux 5.3.
11
12
Instead, check for the running EL and return the physical bits
13
if not running in a virtualized context.
14
15
Fixes: 636540e9c40b
16
Cc: qemu-stable@nongnu.org
17
Reported-by: Quentin Perret <qperret@google.com>
18
Signed-off-by: Marc Zyngier <maz@kernel.org>
19
Message-id: 20191122135833.28953-1-maz@kernel.org
20
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
21
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
22
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
23
---
24
target/arm/helper.c | 7 +++++--
25
1 file changed, 5 insertions(+), 2 deletions(-)
26
27
diff --git a/target/arm/helper.c b/target/arm/helper.c
28
index XXXXXXX..XXXXXXX 100644
29
--- a/target/arm/helper.c
30
+++ b/target/arm/helper.c
31
@@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri)
32
CPUState *cs = env_cpu(env);
33
uint64_t hcr_el2 = arm_hcr_el2_eff(env);
34
uint64_t ret = 0;
35
+ bool allow_virt = (arm_current_el(env) == 1 &&
36
+ (!arm_is_secure_below_el3(env) ||
37
+ (env->cp15.scr_el3 & SCR_EEL2)));
38
39
- if (hcr_el2 & HCR_IMO) {
40
+ if (allow_virt && (hcr_el2 & HCR_IMO)) {
41
if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) {
42
ret |= CPSR_I;
43
}
44
@@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri)
45
}
46
}
47
48
- if (hcr_el2 & HCR_FMO) {
49
+ if (allow_virt && (hcr_el2 & HCR_FMO)) {
50
if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) {
51
ret |= CPSR_F;
52
}
53
--
54
2.20.1
55
56
diff view generated by jsdifflib
Deleted patch
1
From: Marc Zyngier <maz@kernel.org>
2
1
3
HCR_EL2.TID3 mandates that access from EL1 to a long list of id
4
registers traps to EL2, and QEMU has so far ignored this requirement.
5
6
This breaks (among other things) KVM guests that have PtrAuth enabled,
7
while the hypervisor doesn't want to expose the feature to its guest.
8
To achieve this, KVM traps the ID registers (ID_AA64ISAR1_EL1 in this
9
case), and masks out the unsupported feature.
10
11
QEMU not honoring the trap request means that the guest observes
12
that the feature is present in the HW, starts using it, and dies
13
a horrible death when KVM injects an UNDEF, because the feature
14
*really* isn't supported.
15
16
Do the right thing by trapping to EL2 if HCR_EL2.TID3 is set.
17
18
Note that this change does not include trapping of the MVFR
19
registers from AArch32 (they are accessed via the VMRS
20
instruction and need to be handled in a different way).
21
22
Reported-by: Will Deacon <will@kernel.org>
23
Signed-off-by: Marc Zyngier <maz@kernel.org>
24
Tested-by: Will Deacon <will@kernel.org>
25
Message-id: 20191123115618.29230-1-maz@kernel.org
26
[PMM: added missing accessfn line for ID_AA4PFR2_EL1_RESERVED;
27
changed names of access functions to include _tid3]
28
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
29
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
30
---
31
target/arm/helper.c | 76 +++++++++++++++++++++++++++++++++++++++++++++
32
1 file changed, 76 insertions(+)
33
34
diff --git a/target/arm/helper.c b/target/arm/helper.c
35
index XXXXXXX..XXXXXXX 100644
36
--- a/target/arm/helper.c
37
+++ b/target/arm/helper.c
38
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo predinv_reginfo[] = {
39
REGINFO_SENTINEL
40
};
41
42
+static CPAccessResult access_aa64_tid3(CPUARMState *env, const ARMCPRegInfo *ri,
43
+ bool isread)
44
+{
45
+ if ((arm_current_el(env) < 2) && (arm_hcr_el2_eff(env) & HCR_TID3)) {
46
+ return CP_ACCESS_TRAP_EL2;
47
+ }
48
+
49
+ return CP_ACCESS_OK;
50
+}
51
+
52
+static CPAccessResult access_aa32_tid3(CPUARMState *env, const ARMCPRegInfo *ri,
53
+ bool isread)
54
+{
55
+ if (arm_feature(env, ARM_FEATURE_V8)) {
56
+ return access_aa64_tid3(env, ri, isread);
57
+ }
58
+
59
+ return CP_ACCESS_OK;
60
+}
61
+
62
void register_cp_regs_for_features(ARMCPU *cpu)
63
{
64
/* Register all the coprocessor registers based on feature bits */
65
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
66
{ .name = "ID_PFR0", .state = ARM_CP_STATE_BOTH,
67
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0,
68
.access = PL1_R, .type = ARM_CP_CONST,
69
+ .accessfn = access_aa32_tid3,
70
.resetvalue = cpu->id_pfr0 },
71
/* ID_PFR1 is not a plain ARM_CP_CONST because we don't know
72
* the value of the GIC field until after we define these regs.
73
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
74
{ .name = "ID_PFR1", .state = ARM_CP_STATE_BOTH,
75
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1,
76
.access = PL1_R, .type = ARM_CP_NO_RAW,
77
+ .accessfn = access_aa32_tid3,
78
.readfn = id_pfr1_read,
79
.writefn = arm_cp_write_ignore },
80
{ .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH,
81
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2,
82
.access = PL1_R, .type = ARM_CP_CONST,
83
+ .accessfn = access_aa32_tid3,
84
.resetvalue = cpu->id_dfr0 },
85
{ .name = "ID_AFR0", .state = ARM_CP_STATE_BOTH,
86
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 3,
87
.access = PL1_R, .type = ARM_CP_CONST,
88
+ .accessfn = access_aa32_tid3,
89
.resetvalue = cpu->id_afr0 },
90
{ .name = "ID_MMFR0", .state = ARM_CP_STATE_BOTH,
91
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 4,
92
.access = PL1_R, .type = ARM_CP_CONST,
93
+ .accessfn = access_aa32_tid3,
94
.resetvalue = cpu->id_mmfr0 },
95
{ .name = "ID_MMFR1", .state = ARM_CP_STATE_BOTH,
96
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 5,
97
.access = PL1_R, .type = ARM_CP_CONST,
98
+ .accessfn = access_aa32_tid3,
99
.resetvalue = cpu->id_mmfr1 },
100
{ .name = "ID_MMFR2", .state = ARM_CP_STATE_BOTH,
101
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 6,
102
.access = PL1_R, .type = ARM_CP_CONST,
103
+ .accessfn = access_aa32_tid3,
104
.resetvalue = cpu->id_mmfr2 },
105
{ .name = "ID_MMFR3", .state = ARM_CP_STATE_BOTH,
106
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 7,
107
.access = PL1_R, .type = ARM_CP_CONST,
108
+ .accessfn = access_aa32_tid3,
109
.resetvalue = cpu->id_mmfr3 },
110
{ .name = "ID_ISAR0", .state = ARM_CP_STATE_BOTH,
111
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0,
112
.access = PL1_R, .type = ARM_CP_CONST,
113
+ .accessfn = access_aa32_tid3,
114
.resetvalue = cpu->isar.id_isar0 },
115
{ .name = "ID_ISAR1", .state = ARM_CP_STATE_BOTH,
116
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 1,
117
.access = PL1_R, .type = ARM_CP_CONST,
118
+ .accessfn = access_aa32_tid3,
119
.resetvalue = cpu->isar.id_isar1 },
120
{ .name = "ID_ISAR2", .state = ARM_CP_STATE_BOTH,
121
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2,
122
.access = PL1_R, .type = ARM_CP_CONST,
123
+ .accessfn = access_aa32_tid3,
124
.resetvalue = cpu->isar.id_isar2 },
125
{ .name = "ID_ISAR3", .state = ARM_CP_STATE_BOTH,
126
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 3,
127
.access = PL1_R, .type = ARM_CP_CONST,
128
+ .accessfn = access_aa32_tid3,
129
.resetvalue = cpu->isar.id_isar3 },
130
{ .name = "ID_ISAR4", .state = ARM_CP_STATE_BOTH,
131
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 4,
132
.access = PL1_R, .type = ARM_CP_CONST,
133
+ .accessfn = access_aa32_tid3,
134
.resetvalue = cpu->isar.id_isar4 },
135
{ .name = "ID_ISAR5", .state = ARM_CP_STATE_BOTH,
136
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 5,
137
.access = PL1_R, .type = ARM_CP_CONST,
138
+ .accessfn = access_aa32_tid3,
139
.resetvalue = cpu->isar.id_isar5 },
140
{ .name = "ID_MMFR4", .state = ARM_CP_STATE_BOTH,
141
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6,
142
.access = PL1_R, .type = ARM_CP_CONST,
143
+ .accessfn = access_aa32_tid3,
144
.resetvalue = cpu->id_mmfr4 },
145
{ .name = "ID_ISAR6", .state = ARM_CP_STATE_BOTH,
146
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 7,
147
.access = PL1_R, .type = ARM_CP_CONST,
148
+ .accessfn = access_aa32_tid3,
149
.resetvalue = cpu->isar.id_isar6 },
150
REGINFO_SENTINEL
151
};
152
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
153
{ .name = "ID_AA64PFR0_EL1", .state = ARM_CP_STATE_AA64,
154
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 0,
155
.access = PL1_R, .type = ARM_CP_NO_RAW,
156
+ .accessfn = access_aa64_tid3,
157
.readfn = id_aa64pfr0_read,
158
.writefn = arm_cp_write_ignore },
159
{ .name = "ID_AA64PFR1_EL1", .state = ARM_CP_STATE_AA64,
160
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 1,
161
.access = PL1_R, .type = ARM_CP_CONST,
162
+ .accessfn = access_aa64_tid3,
163
.resetvalue = cpu->isar.id_aa64pfr1},
164
{ .name = "ID_AA64PFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
165
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 2,
166
.access = PL1_R, .type = ARM_CP_CONST,
167
+ .accessfn = access_aa64_tid3,
168
.resetvalue = 0 },
169
{ .name = "ID_AA64PFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
170
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 3,
171
.access = PL1_R, .type = ARM_CP_CONST,
172
+ .accessfn = access_aa64_tid3,
173
.resetvalue = 0 },
174
{ .name = "ID_AA64ZFR0_EL1", .state = ARM_CP_STATE_AA64,
175
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 4,
176
.access = PL1_R, .type = ARM_CP_CONST,
177
+ .accessfn = access_aa64_tid3,
178
/* At present, only SVEver == 0 is defined anyway. */
179
.resetvalue = 0 },
180
{ .name = "ID_AA64PFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
181
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 5,
182
.access = PL1_R, .type = ARM_CP_CONST,
183
+ .accessfn = access_aa64_tid3,
184
.resetvalue = 0 },
185
{ .name = "ID_AA64PFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
186
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 6,
187
.access = PL1_R, .type = ARM_CP_CONST,
188
+ .accessfn = access_aa64_tid3,
189
.resetvalue = 0 },
190
{ .name = "ID_AA64PFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
191
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 7,
192
.access = PL1_R, .type = ARM_CP_CONST,
193
+ .accessfn = access_aa64_tid3,
194
.resetvalue = 0 },
195
{ .name = "ID_AA64DFR0_EL1", .state = ARM_CP_STATE_AA64,
196
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 0,
197
.access = PL1_R, .type = ARM_CP_CONST,
198
+ .accessfn = access_aa64_tid3,
199
.resetvalue = cpu->id_aa64dfr0 },
200
{ .name = "ID_AA64DFR1_EL1", .state = ARM_CP_STATE_AA64,
201
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 1,
202
.access = PL1_R, .type = ARM_CP_CONST,
203
+ .accessfn = access_aa64_tid3,
204
.resetvalue = cpu->id_aa64dfr1 },
205
{ .name = "ID_AA64DFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
206
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 2,
207
.access = PL1_R, .type = ARM_CP_CONST,
208
+ .accessfn = access_aa64_tid3,
209
.resetvalue = 0 },
210
{ .name = "ID_AA64DFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
211
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 3,
212
.access = PL1_R, .type = ARM_CP_CONST,
213
+ .accessfn = access_aa64_tid3,
214
.resetvalue = 0 },
215
{ .name = "ID_AA64AFR0_EL1", .state = ARM_CP_STATE_AA64,
216
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 4,
217
.access = PL1_R, .type = ARM_CP_CONST,
218
+ .accessfn = access_aa64_tid3,
219
.resetvalue = cpu->id_aa64afr0 },
220
{ .name = "ID_AA64AFR1_EL1", .state = ARM_CP_STATE_AA64,
221
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 5,
222
.access = PL1_R, .type = ARM_CP_CONST,
223
+ .accessfn = access_aa64_tid3,
224
.resetvalue = cpu->id_aa64afr1 },
225
{ .name = "ID_AA64AFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
226
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 6,
227
.access = PL1_R, .type = ARM_CP_CONST,
228
+ .accessfn = access_aa64_tid3,
229
.resetvalue = 0 },
230
{ .name = "ID_AA64AFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
231
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 7,
232
.access = PL1_R, .type = ARM_CP_CONST,
233
+ .accessfn = access_aa64_tid3,
234
.resetvalue = 0 },
235
{ .name = "ID_AA64ISAR0_EL1", .state = ARM_CP_STATE_AA64,
236
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 0,
237
.access = PL1_R, .type = ARM_CP_CONST,
238
+ .accessfn = access_aa64_tid3,
239
.resetvalue = cpu->isar.id_aa64isar0 },
240
{ .name = "ID_AA64ISAR1_EL1", .state = ARM_CP_STATE_AA64,
241
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 1,
242
.access = PL1_R, .type = ARM_CP_CONST,
243
+ .accessfn = access_aa64_tid3,
244
.resetvalue = cpu->isar.id_aa64isar1 },
245
{ .name = "ID_AA64ISAR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
246
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 2,
247
.access = PL1_R, .type = ARM_CP_CONST,
248
+ .accessfn = access_aa64_tid3,
249
.resetvalue = 0 },
250
{ .name = "ID_AA64ISAR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
251
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 3,
252
.access = PL1_R, .type = ARM_CP_CONST,
253
+ .accessfn = access_aa64_tid3,
254
.resetvalue = 0 },
255
{ .name = "ID_AA64ISAR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
256
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 4,
257
.access = PL1_R, .type = ARM_CP_CONST,
258
+ .accessfn = access_aa64_tid3,
259
.resetvalue = 0 },
260
{ .name = "ID_AA64ISAR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
261
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 5,
262
.access = PL1_R, .type = ARM_CP_CONST,
263
+ .accessfn = access_aa64_tid3,
264
.resetvalue = 0 },
265
{ .name = "ID_AA64ISAR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
266
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 6,
267
.access = PL1_R, .type = ARM_CP_CONST,
268
+ .accessfn = access_aa64_tid3,
269
.resetvalue = 0 },
270
{ .name = "ID_AA64ISAR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
271
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 7,
272
.access = PL1_R, .type = ARM_CP_CONST,
273
+ .accessfn = access_aa64_tid3,
274
.resetvalue = 0 },
275
{ .name = "ID_AA64MMFR0_EL1", .state = ARM_CP_STATE_AA64,
276
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 0,
277
.access = PL1_R, .type = ARM_CP_CONST,
278
+ .accessfn = access_aa64_tid3,
279
.resetvalue = cpu->isar.id_aa64mmfr0 },
280
{ .name = "ID_AA64MMFR1_EL1", .state = ARM_CP_STATE_AA64,
281
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 1,
282
.access = PL1_R, .type = ARM_CP_CONST,
283
+ .accessfn = access_aa64_tid3,
284
.resetvalue = cpu->isar.id_aa64mmfr1 },
285
{ .name = "ID_AA64MMFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
286
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 2,
287
.access = PL1_R, .type = ARM_CP_CONST,
288
+ .accessfn = access_aa64_tid3,
289
.resetvalue = 0 },
290
{ .name = "ID_AA64MMFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
291
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 3,
292
.access = PL1_R, .type = ARM_CP_CONST,
293
+ .accessfn = access_aa64_tid3,
294
.resetvalue = 0 },
295
{ .name = "ID_AA64MMFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
296
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 4,
297
.access = PL1_R, .type = ARM_CP_CONST,
298
+ .accessfn = access_aa64_tid3,
299
.resetvalue = 0 },
300
{ .name = "ID_AA64MMFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
301
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 5,
302
.access = PL1_R, .type = ARM_CP_CONST,
303
+ .accessfn = access_aa64_tid3,
304
.resetvalue = 0 },
305
{ .name = "ID_AA64MMFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
306
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 6,
307
.access = PL1_R, .type = ARM_CP_CONST,
308
+ .accessfn = access_aa64_tid3,
309
.resetvalue = 0 },
310
{ .name = "ID_AA64MMFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
311
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 7,
312
.access = PL1_R, .type = ARM_CP_CONST,
313
+ .accessfn = access_aa64_tid3,
314
.resetvalue = 0 },
315
{ .name = "MVFR0_EL1", .state = ARM_CP_STATE_AA64,
316
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 0,
317
.access = PL1_R, .type = ARM_CP_CONST,
318
+ .accessfn = access_aa64_tid3,
319
.resetvalue = cpu->isar.mvfr0 },
320
{ .name = "MVFR1_EL1", .state = ARM_CP_STATE_AA64,
321
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 1,
322
.access = PL1_R, .type = ARM_CP_CONST,
323
+ .accessfn = access_aa64_tid3,
324
.resetvalue = cpu->isar.mvfr1 },
325
{ .name = "MVFR2_EL1", .state = ARM_CP_STATE_AA64,
326
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2,
327
.access = PL1_R, .type = ARM_CP_CONST,
328
+ .accessfn = access_aa64_tid3,
329
.resetvalue = cpu->isar.mvfr2 },
330
{ .name = "MVFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
331
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 3,
332
.access = PL1_R, .type = ARM_CP_CONST,
333
+ .accessfn = access_aa64_tid3,
334
.resetvalue = 0 },
335
{ .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
336
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4,
337
.access = PL1_R, .type = ARM_CP_CONST,
338
+ .accessfn = access_aa64_tid3,
339
.resetvalue = 0 },
340
{ .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
341
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5,
342
.access = PL1_R, .type = ARM_CP_CONST,
343
+ .accessfn = access_aa64_tid3,
344
.resetvalue = 0 },
345
{ .name = "MVFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
346
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 6,
347
.access = PL1_R, .type = ARM_CP_CONST,
348
+ .accessfn = access_aa64_tid3,
349
.resetvalue = 0 },
350
{ .name = "MVFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
351
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 7,
352
.access = PL1_R, .type = ARM_CP_CONST,
353
+ .accessfn = access_aa64_tid3,
354
.resetvalue = 0 },
355
{ .name = "PMCEID0", .state = ARM_CP_STATE_AA32,
356
.cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6,
357
--
358
2.20.1
359
360
diff view generated by jsdifflib