Series comparison

-[PULL 0/3] target-arm queue
+[PULL 00/21] target-arm queue
-Arm patches for rc1:
+Arm queue; not huge but I figured I might as well send it out since
- * two final "remove the old API" patches for some API transitions
+I've been doing code review today and there's no queue of unprocessed
- * bugfix for raspi/highbank Linux boot
+pullreqs...
 thanks
 -- PMM
-The following changes since commit 654efcb511d394c1d3f5292c28503d1d19e5b1d3:
+The following changes since commit b3f846c59d8405bb87c551187721fc92ff2f1b92:
-  Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' into staging (2019-11-11 09:23:46 +0000)
+  Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-01-11v2' into staging (2021-01-11 15:15:35 +0000)
 are available in the Git repository at:
-  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191111
+  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210112
-for you to fetch changes up to 45c078f163fd47c35e7505d98928fae63baada7d:
+for you to fetch changes up to 19d131395ccaf503db21dadd8257e6dc9fc1d7de:
-  hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine (2019-11-11 13:44:16 +0000)
+  ui/cocoa: Fix openFile: deprecation on Big Sur (2021-01-12 11:38:37 +0000)
 ----------------------------------------------------------------
 target-arm queue:
- * Remove old unassigned_access CPU hook API
+ * arm: Support emulation of ARMv8.4-TTST extension
- * Remove old ptimer_init_with_bh() API
+ * arm: Update cpu.h ID register field definitions
- * hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine
+ * arm: Fix breakage of XScale instruction emulation
  * hw/net/lan9118: Fix RX Status FIFO PEEK value
  * npcm7xx: Add ADC and PWM emulation
  * ui/cocoa: Make "open docs" help menu entry work again when binary
    is run from the build tree
  * ui/cocoa: Fix openFile: deprecation on Big Sur
  * docs: Add qemu-storage-daemon(1) manpage to meson.build
  * docs: Build and install all the docs in a single manual
 ----------------------------------------------------------------
-Clement Deschamps (1):
+Hao Wu (6):
-      hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine
+      hw/misc: Add clock converter in NPCM7XX CLK module
       hw/timer: Refactor NPCM7XX Timer to use CLK clock
       hw/adc: Add an ADC module for NPCM7XX
       hw/misc: Add a PWM module for NPCM7XX
       hw/misc: Add QTest for NPCM7XX PWM Module
       hw/*: Use type casting for SysBusDevice in NPCM7XX
-Peter Maydell (2):
+Leif Lindholm (6):
-      ptimer: Remove old ptimer_init_with_bh() API
+      target/arm: fix typo in cpu.h ID_AA64PFR1 field name
-      Remove unassigned_access CPU hook
+      target/arm: make ARMCPU.clidr 64-bit
       target/arm: make ARMCPU.ctr 64-bit
       target/arm: add descriptions of CLIDR_EL1, CCSIDR_EL1, CTR_EL0 to cpu.h
       target/arm: add aarch64 ID register fields to cpu.h
       target/arm: add aarch32 ID register fields to cpu.h
- include/hw/arm/boot.h |  7 ++--
+Peter Maydell (5):
- include/hw/core/cpu.h | 24 --------------
+      docs: Add qemu-storage-daemon(1) manpage to meson.build
- include/hw/ptimer.h   | 45 ++++++++++++-------------
+      docs: Build and install all the docs in a single manual
- accel/tcg/cputlb.c    |  2 --
+      target/arm: Don't decode insns in the XScale/iWMMXt space as cp insns
- hw/arm/boot.c         |  3 ++
+      hw/net/lan9118: Fix RX Status FIFO PEEK value
- hw/core/ptimer.c      | 91 +++++++++------------------------------------------
+      hw/net/lan9118: Add symbolic constants for register offsets
  memory.c              |  7 ----
 files changed, 44 insertions(+), 135 deletions(-)
+Roman Bolshakov (2):
+      ui/cocoa: Update path to docs in build tree
+      ui/cocoa: Fix openFile: deprecation on Big Sur
+Rémi Denis-Courmont (2):
+      target/arm: ARMv8.4-TTST extension
+      target/arm: enable Small Translation tables in max CPU
+ docs/conf.py                     |  46 ++-
+ docs/devel/conf.py               |  15 -
+ docs/index.html.in               |  17 -
+ docs/interop/conf.py             |  28 --
+ docs/meson.build                 |  65 ++--
+ docs/specs/conf.py               |  16 -
+ docs/system/arm/nuvoton.rst      |   4 +-
+ docs/system/conf.py              |  28 --
+ docs/tools/conf.py               |  37 --
+ docs/user/conf.py                |  15 -
+ meson.build                      |   1 +
+ hw/adc/trace.h                   |   1 +
+ include/hw/adc/npcm7xx_adc.h     |  69 ++++
+ include/hw/arm/npcm7xx.h         |   4 +
+ include/hw/misc/npcm7xx_clk.h    | 146 ++++++-
+ include/hw/misc/npcm7xx_pwm.h    | 105 +++++
+ include/hw/timer/npcm7xx_timer.h |   1 +
+ target/arm/cpu.h                 |  85 ++++-
+ hw/adc/npcm7xx_adc.c             | 301 +++++++++++++++
+ hw/arm/npcm7xx.c                 |  55 ++-
+ hw/arm/npcm7xx_boards.c          |   2 +-
+ hw/mem/npcm7xx_mc.c              |   2 +-
+ hw/misc/npcm7xx_clk.c            | 807 ++++++++++++++++++++++++++++++++++++++-
+ hw/misc/npcm7xx_gcr.c            |   2 +-
+ hw/misc/npcm7xx_pwm.c            | 550 ++++++++++++++++++++++++++
+ hw/misc/npcm7xx_rng.c            |   2 +-
+ hw/net/lan9118.c                 |  26 +-
+ hw/nvram/npcm7xx_otp.c           |   2 +-
+ hw/ssi/npcm7xx_fiu.c             |   2 +-
+ hw/timer/npcm7xx_timer.c         |  39 +-
+ target/arm/cpu64.c               |   1 +
+ target/arm/helper.c              |  15 +-
+ target/arm/translate.c           |   7 +
+ tests/qtest/npcm7xx_adc-test.c   | 377 ++++++++++++++++++
+ tests/qtest/npcm7xx_pwm-test.c   | 490 ++++++++++++++++++++++++
+ hw/adc/meson.build               |   1 +
+ hw/adc/trace-events              |   5 +
+ hw/misc/meson.build              |   1 +
+ hw/misc/trace-events             |   6 +
+ tests/qtest/meson.build          |   4 +-
+ ui/cocoa.m                       |   7 +-
+files changed, 3124 insertions(+), 263 deletions(-)
+ delete mode 100644 docs/devel/conf.py
+ delete mode 100644 docs/index.html.in
+ delete mode 100644 docs/interop/conf.py
+ delete mode 100644 docs/specs/conf.py
+ delete mode 100644 docs/system/conf.py
+ delete mode 100644 docs/tools/conf.py
+ delete mode 100644 docs/user/conf.py
+ create mode 100644 hw/adc/trace.h
+ create mode 100644 include/hw/adc/npcm7xx_adc.h
+ create mode 100644 include/hw/misc/npcm7xx_pwm.h
+ create mode 100644 hw/adc/npcm7xx_adc.c
+ create mode 100644 hw/misc/npcm7xx_pwm.c
+ create mode 100644 tests/qtest/npcm7xx_adc-test.c
+ create mode 100644 tests/qtest/npcm7xx_pwm-test.c
+ create mode 100644 hw/adc/trace-events

-New patch
+[PULL 01/21] target/arm: ARMv8.4-TTST extension
+From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
+This adds for the Small Translation tables extension in AArch64 state.
+Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h    |  5 +++++
+ target/arm/helper.c | 15 +++++++++++++--
+files changed, 18 insertions(+), 2 deletions(-)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_uao(const ARMISARegisters *id)
+     return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, UAO) != 0;
+ }
++static inline bool isar_feature_aa64_st(const ARMISARegisters *id)
++{
++    return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, ST) != 0;
++}
++
+ static inline bool isar_feature_aa64_bti(const ARMISARegisters *id)
+ {
+     return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, BT) != 0;
+diff --git a/target/arm/helper.c b/target/arm/helper.c
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/helper.c
++++ b/target/arm/helper.c
+@@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
+ {
+     uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
+     bool epd, hpd, using16k, using64k;
+-    int select, tsz, tbi;
++    int select, tsz, tbi, max_tsz;
+     if (!regime_has_2_ranges(mmu_idx)) {
+         select = 0;
+@@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
+             hpd = extract64(tcr, 42, 1);
+         }
+     }
+-    tsz = MIN(tsz, 39);  /* TODO: ARMv8.4-TTST */
++
++    if (cpu_isar_feature(aa64_st, env_archcpu(env))) {
++        max_tsz = 48 - using64k;
++    } else {
++        max_tsz = 39;
++    }
++
++    tsz = MIN(tsz, max_tsz);
+     tsz = MAX(tsz, 16);  /* TODO: ARMv8.2-LVA  */
+     /* Present TBI as a composite with TBID.  */
+@@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
+         if (!aarch64 || stride == 9) {
+             /* AArch32 or 4KB pages */
+             startlevel = 2 - sl0;
++
++            if (cpu_isar_feature(aa64_st, cpu)) {
++                startlevel &= 3;
++            }
+         } else {
+             /* 16KB or 64KB pages */
+             startlevel = 3 - sl0;
+--
+.20.1

-New patch
+[PULL 02/21] target/arm: enable Small Translation tables in max CPU
+From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
+Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu64.c | 1 +
+file changed, 1 insertion(+)
+diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu64.c
++++ b/target/arm/cpu64.c
+@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
+         t = cpu->isar.id_aa64mmfr2;
+         t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1);
+         t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */
++        t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* TTST */
+         cpu->isar.id_aa64mmfr2 = t;
+         /* Replicate the same data to the 32-bit id registers.  */
+--
+.20.1

-New patch
+[PULL 03/21] target/arm: fix typo in cpu.h ID_AA64PFR1 field name
+From: Leif Lindholm <leif@nuviainc.com>
+SBSS -> SSBS
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-2-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 2 +-
+file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64PFR0, RAS, 28, 4)
+ FIELD(ID_AA64PFR0, SVE, 32, 4)
+ FIELD(ID_AA64PFR1, BT, 0, 4)
+-FIELD(ID_AA64PFR1, SBSS, 4, 4)
++FIELD(ID_AA64PFR1, SSBS, 4, 4)
+ FIELD(ID_AA64PFR1, MTE, 8, 4)
+ FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4)
+--
+.20.1

-New patch
+[PULL 04/21] target/arm: make ARMCPU.clidr 64-bit
+From: Leif Lindholm <leif@nuviainc.com>
+The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit
+, as well as adding a Ttype<n> field when FEAT_MTE is implemented.
+Extend the clidr field to be able to hold this context.
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-3-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 2 +-
+file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ struct ARMCPU {
+     uint32_t id_afr0;
+     uint64_t id_aa64afr0;
+     uint64_t id_aa64afr1;
+-    uint32_t clidr;
++    uint64_t clidr;
+     uint64_t mp_affinity; /* MP ID without feature bits */
+     /* The elements of this array are the CCSIDR values for each cache,
+      * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
+--
+.20.1

-New patch
+[PULL 05/21] target/arm: make ARMCPU.ctr 64-bit
+From: Leif Lindholm <leif@nuviainc.com>
+When FEAT_MTE is implemented, the AArch64 view of CTR_EL0 adds the
+TminLine field in bits [37:32].
+Extend the ctr field to be able to hold this context.
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Hao Wu <wuhaotsh@google.com>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-4-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 2 +-
+file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ struct ARMCPU {
+     uint64_t midr;
+     uint32_t revidr;
+     uint32_t reset_fpsid;
+-    uint32_t ctr;
++    uint64_t ctr;
+     uint32_t reset_sctlr;
+     uint64_t pmceid0;
+     uint64_t pmceid1;
+--
+.20.1

-New patch
+[PULL 06/21] target/arm: add descriptions of CLIDR_EL1, CCSIDR_EL1, CTR_EL0 to cpu.h
+From: Leif Lindholm <leif@nuviainc.com>
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-5-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 31 +++++++++++++++++++++++++++++++
+file changed, 31 insertions(+)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ FIELD(V7M_FPCCR, ASPEN, 31, 1)
+ /*
+  * System register ID fields.
+  */
++FIELD(CLIDR_EL1, CTYPE1, 0, 3)
++FIELD(CLIDR_EL1, CTYPE2, 3, 3)
++FIELD(CLIDR_EL1, CTYPE3, 6, 3)
++FIELD(CLIDR_EL1, CTYPE4, 9, 3)
++FIELD(CLIDR_EL1, CTYPE5, 12, 3)
++FIELD(CLIDR_EL1, CTYPE6, 15, 3)
++FIELD(CLIDR_EL1, CTYPE7, 18, 3)
++FIELD(CLIDR_EL1, LOUIS, 21, 3)
++FIELD(CLIDR_EL1, LOC, 24, 3)
++FIELD(CLIDR_EL1, LOUU, 27, 3)
++FIELD(CLIDR_EL1, ICB, 30, 3)
++
++/* When FEAT_CCIDX is implemented */
++FIELD(CCSIDR_EL1, CCIDX_LINESIZE, 0, 3)
++FIELD(CCSIDR_EL1, CCIDX_ASSOCIATIVITY, 3, 21)
++FIELD(CCSIDR_EL1, CCIDX_NUMSETS, 32, 24)
++
++/* When FEAT_CCIDX is not implemented */
++FIELD(CCSIDR_EL1, LINESIZE, 0, 3)
++FIELD(CCSIDR_EL1, ASSOCIATIVITY, 3, 10)
++FIELD(CCSIDR_EL1, NUMSETS, 13, 15)
++
++FIELD(CTR_EL0,  IMINLINE, 0, 4)
++FIELD(CTR_EL0,  L1IP, 14, 2)
++FIELD(CTR_EL0,  DMINLINE, 16, 4)
++FIELD(CTR_EL0,  ERG, 20, 4)
++FIELD(CTR_EL0,  CWG, 24, 4)
++FIELD(CTR_EL0,  IDC, 28, 1)
++FIELD(CTR_EL0,  DIC, 29, 1)
++FIELD(CTR_EL0,  TMINLINE, 32, 6)
++
+ FIELD(MIDR_EL1, REVISION, 0, 4)
+ FIELD(MIDR_EL1, PARTNUM, 4, 12)
+ FIELD(MIDR_EL1, ARCHITECTURE, 16, 4)
+--
+.20.1

-New patch
+[PULL 07/21] target/arm: add aarch64 ID register fields to cpu.h
+From: Leif Lindholm <leif@nuviainc.com>
+Add entries present in ARM DDI 0487F.c (August 2020).
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-6-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 15 +++++++++++++++
+file changed, 15 insertions(+)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64ISAR1, GPI, 28, 4)
+ FIELD(ID_AA64ISAR1, FRINTTS, 32, 4)
+ FIELD(ID_AA64ISAR1, SB, 36, 4)
+ FIELD(ID_AA64ISAR1, SPECRES, 40, 4)
++FIELD(ID_AA64ISAR1, BF16, 44, 4)
++FIELD(ID_AA64ISAR1, DGH, 48, 4)
++FIELD(ID_AA64ISAR1, I8MM, 52, 4)
+ FIELD(ID_AA64PFR0, EL0, 0, 4)
+ FIELD(ID_AA64PFR0, EL1, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64PFR0, ADVSIMD, 20, 4)
+ FIELD(ID_AA64PFR0, GIC, 24, 4)
+ FIELD(ID_AA64PFR0, RAS, 28, 4)
+ FIELD(ID_AA64PFR0, SVE, 32, 4)
++FIELD(ID_AA64PFR0, SEL2, 36, 4)
++FIELD(ID_AA64PFR0, MPAM, 40, 4)
++FIELD(ID_AA64PFR0, AMU, 44, 4)
++FIELD(ID_AA64PFR0, DIT, 48, 4)
++FIELD(ID_AA64PFR0, CSV2, 56, 4)
++FIELD(ID_AA64PFR0, CSV3, 60, 4)
+ FIELD(ID_AA64PFR1, BT, 0, 4)
+ FIELD(ID_AA64PFR1, SSBS, 4, 4)
+ FIELD(ID_AA64PFR1, MTE, 8, 4)
+ FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4)
++FIELD(ID_AA64PFR1, MPAM_FRAC, 16, 4)
+ FIELD(ID_AA64MMFR0, PARANGE, 0, 4)
+ FIELD(ID_AA64MMFR0, ASIDBITS, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR0, TGRAN16_2, 32, 4)
+ FIELD(ID_AA64MMFR0, TGRAN64_2, 36, 4)
+ FIELD(ID_AA64MMFR0, TGRAN4_2, 40, 4)
+ FIELD(ID_AA64MMFR0, EXS, 44, 4)
++FIELD(ID_AA64MMFR0, FGT, 56, 4)
++FIELD(ID_AA64MMFR0, ECV, 60, 4)
+ FIELD(ID_AA64MMFR1, HAFDBS, 0, 4)
+ FIELD(ID_AA64MMFR1, VMIDBITS, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR1, LO, 16, 4)
+ FIELD(ID_AA64MMFR1, PAN, 20, 4)
+ FIELD(ID_AA64MMFR1, SPECSEI, 24, 4)
+ FIELD(ID_AA64MMFR1, XNX, 28, 4)
++FIELD(ID_AA64MMFR1, TWED, 32, 4)
++FIELD(ID_AA64MMFR1, ETS, 36, 4)
+ FIELD(ID_AA64MMFR2, CNP, 0, 4)
+ FIELD(ID_AA64MMFR2, UAO, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64DFR0, CTX_CMPS, 28, 4)
+ FIELD(ID_AA64DFR0, PMSVER, 32, 4)
+ FIELD(ID_AA64DFR0, DOUBLELOCK, 36, 4)
+ FIELD(ID_AA64DFR0, TRACEFILT, 40, 4)
++FIELD(ID_AA64DFR0, MTPMU, 48, 4)
+ FIELD(ID_DFR0, COPDBG, 0, 4)
+ FIELD(ID_DFR0, COPSDBG, 4, 4)
+--
+.20.1

-New patch
+[PULL 08/21] target/arm: add aarch32 ID register fields to cpu.h
+From: Leif Lindholm <leif@nuviainc.com>
+Add entries present in ARM DDI 0487F.c (August 2020).
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-7-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 28 ++++++++++++++++++++++++++++
+file changed, 28 insertions(+)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_ISAR6, DP, 4, 4)
+ FIELD(ID_ISAR6, FHM, 8, 4)
+ FIELD(ID_ISAR6, SB, 12, 4)
+ FIELD(ID_ISAR6, SPECRES, 16, 4)
++FIELD(ID_ISAR6, BF16, 20, 4)
++FIELD(ID_ISAR6, I8MM, 24, 4)
+ FIELD(ID_MMFR0, VMSA, 0, 4)
+ FIELD(ID_MMFR0, PMSA, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR0, AUXREG, 20, 4)
+ FIELD(ID_MMFR0, FCSE, 24, 4)
+ FIELD(ID_MMFR0, INNERSHR, 28, 4)
++FIELD(ID_MMFR1, L1HVDVA, 0, 4)
++FIELD(ID_MMFR1, L1UNIVA, 4, 4)
++FIELD(ID_MMFR1, L1HVDSW, 8, 4)
++FIELD(ID_MMFR1, L1UNISW, 12, 4)
++FIELD(ID_MMFR1, L1HVD, 16, 4)
++FIELD(ID_MMFR1, L1UNI, 20, 4)
++FIELD(ID_MMFR1, L1TSTCLN, 24, 4)
++FIELD(ID_MMFR1, BPRED, 28, 4)
++
++FIELD(ID_MMFR2, L1HVDFG, 0, 4)
++FIELD(ID_MMFR2, L1HVDBG, 4, 4)
++FIELD(ID_MMFR2, L1HVDRNG, 8, 4)
++FIELD(ID_MMFR2, HVDTLB, 12, 4)
++FIELD(ID_MMFR2, UNITLB, 16, 4)
++FIELD(ID_MMFR2, MEMBARR, 20, 4)
++FIELD(ID_MMFR2, WFISTALL, 24, 4)
++FIELD(ID_MMFR2, HWACCFLG, 28, 4)
++
+ FIELD(ID_MMFR3, CMAINTVA, 0, 4)
+ FIELD(ID_MMFR3, CMAINTSW, 4, 4)
+ FIELD(ID_MMFR3, BPMAINT, 8, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR4, LSM, 20, 4)
+ FIELD(ID_MMFR4, CCIDX, 24, 4)
+ FIELD(ID_MMFR4, EVT, 28, 4)
++FIELD(ID_MMFR5, ETS, 0, 4)
++
+ FIELD(ID_PFR0, STATE0, 0, 4)
+ FIELD(ID_PFR0, STATE1, 4, 4)
+ FIELD(ID_PFR0, STATE2, 8, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_PFR1, SEC_FRAC, 20, 4)
+ FIELD(ID_PFR1, VIRT_FRAC, 24, 4)
+ FIELD(ID_PFR1, GIC, 28, 4)
++FIELD(ID_PFR2, CSV3, 0, 4)
++FIELD(ID_PFR2, SSBS, 4, 4)
++FIELD(ID_PFR2, RAS_FRAC, 8, 4)
++
+ FIELD(ID_AA64ISAR0, AES, 4, 4)
+ FIELD(ID_AA64ISAR0, SHA1, 8, 4)
+ FIELD(ID_AA64ISAR0, SHA2, 12, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_DFR0, MPROFDBG, 20, 4)
+ FIELD(ID_DFR0, PERFMON, 24, 4)
+ FIELD(ID_DFR0, TRACEFILT, 28, 4)
++FIELD(ID_DFR1, MTPMU, 0, 4)
++
+ FIELD(DBGDIDR, SE_IMP, 12, 1)
+ FIELD(DBGDIDR, NSUHD_IMP, 14, 1)
+ FIELD(DBGDIDR, VERSION, 16, 4)
+--
+.20.1

-New patch
+[PULL 09/21] ui/cocoa: Update path to docs in build tree
+From: Roman Bolshakov <r.bolshakov@yadro.com>
+QEMU documentation can't be opened if QEMU is run from build tree
+because executables are placed in the top of build tree after conversion
+to meson.
+Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
+Reported-by: Peter Maydell <peter.maydell@linaro.org>
+Message-id: 20210108213815.64678-1-r.bolshakov@yadro.com
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ ui/cocoa.m | 2 +-
+file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/ui/cocoa.m b/ui/cocoa.m
+index XXXXXXX..XXXXXXX 100644
+--- a/ui/cocoa.m
++++ b/ui/cocoa.m
+@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
+ - (void) openDocumentation: (NSString *) filename
+ {
+     /* Where to look for local files */
+-    NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"../docs/"};
++    NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"};
+     NSString *full_file_path;
+     /* iterate thru the possible paths until the file is found */
+--
+.20.1

-New patch
+[PULL 10/21] docs: Add qemu-storage-daemon(1) manpage to meson.build
+In commit 1982e1602d15 we added a new qemu-storage-daemon(1) manpage.
+At the moment new manpages have to be listed both in the conf.py for
+Sphinx and also in docs/meson.build for Meson. We forgot the second
+of those -- correct the omission.
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
+Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
+Message-id: 20210108161416.21129-2-peter.maydell@linaro.org
+---
+ docs/meson.build | 1 +
+file changed, 1 insertion(+)
+diff --git a/docs/meson.build b/docs/meson.build
+index XXXXXXX..XXXXXXX 100644
+--- a/docs/meson.build
++++ b/docs/meson.build
+@@ -XXX,XX +XXX,XX @@ if build_docs
+         'qemu-img.1': (have_tools ? 'man1' : ''),
+         'qemu-nbd.8': (have_tools ? 'man8' : ''),
+         'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
++        'qemu-storage-daemon.1': (have_tools ? 'man1' : ''),
+         'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
+         'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
+         'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
+--
+.20.1

-New patch
+[PULL 11/21] docs: Build and install all the docs in a single manual
+When we first converted our documentation to Sphinx, we split it into
 multiple manuals (system, interop, tools, etc), which are all built
 separately.  The primary driver for this was wanting to be able to
 avoid shipping the 'devel' manual to end-users.  However, this is
 working against the grain of the way Sphinx wants to be used and
 causes some annoyances:
  * Cross-references between documents become much harder or
    possibly impossible
  * There is no single index to the whole documentation
  * Within one manual there's no links or table-of-contents info
    that lets you easily navigate to the others
  * The devel manual doesn't get published on the QEMU website
    (it would be nice to able to refer to it there)
 Merely hiding our developer documentation from end users seems like
 it's not enough benefit for these costs.  Combine all the
 documentation into a single manual (the same way that the readthedocs
 site builds it) and install the whole thing.  The previous manual
 divisions remain as the new top level sections in the manual.
  * The per-manual conf.py files are no longer needed
  * The man_pages[] specifications previously in each per-manual
    conf.py move to the top level conf.py
  * docs/meson.build logic is simplified as we now only need to run
    Sphinx once for the HTML and then once for the manpages5B
  * The old index.html.in that produced the top-level page with
    links to each manual is no longer needed
 Unfortunately this means that we now have to build the HTML
 documentation into docs/manual in the build tree rather than directly
 into docs/; otherwise it is too awkward to ensure we install only the
 built manual and not also the dependency info, stamp file, etc.  The
 manual still ends up in the same place in the final installed
 directory, but anybody who was consulting documentation from within
 the build tree will have to adjust where they're looking.
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
 Message-id: 20210108161416.21129-3-peter.maydell@linaro.org
 ---
  docs/conf.py         | 46 ++++++++++++++++++++++++++++++-
  docs/devel/conf.py   | 15 -----------
  docs/index.html.in   | 17 ------------
  docs/interop/conf.py | 28 -------------------
  docs/meson.build     | 64 +++++++++++++++++---------------------------
  docs/specs/conf.py   | 16 -----------
  docs/system/conf.py  | 28 -------------------
  docs/tools/conf.py   | 37 -------------------------
  docs/user/conf.py    | 15 -----------
 files changed, 70 insertions(+), 196 deletions(-)
  delete mode 100644 docs/devel/conf.py
  delete mode 100644 docs/index.html.in
  delete mode 100644 docs/interop/conf.py
  delete mode 100644 docs/specs/conf.py
  delete mode 100644 docs/system/conf.py
  delete mode 100644 docs/tools/conf.py
  delete mode 100644 docs/user/conf.py
 diff --git a/docs/conf.py b/docs/conf.py
 index XXXXXXX..XXXXXXX 100644
 --- a/docs/conf.py
 +++ b/docs/conf.py
@@ -XXX,XX +XXX,XX @@ latex_documents = [
  # -- Options for manual page output ---------------------------------------
  # Individual manual/conf.py can override this to create man pages
 -man_pages = []
 +man_pages = [
 +    ('interop/qemu-ga', 'qemu-ga',
 +     'QEMU Guest Agent',
 +     ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
 +    ('interop/qemu-ga-ref', 'qemu-ga-ref',
 +     'QEMU Guest Agent Protocol Reference',
 +     [], 7),
 +    ('interop/qemu-qmp-ref', 'qemu-qmp-ref',
 +     'QEMU QMP Reference Manual',
 +     [], 7),
 +    ('interop/qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
 +     'QEMU Storage Daemon QMP Reference Manual',
 +     [], 7),
 +    ('system/qemu-manpage', 'qemu',
 +     'QEMU User Documentation',
 +     ['Fabrice Bellard'], 1),
 +    ('system/qemu-block-drivers', 'qemu-block-drivers',
 +     'QEMU block drivers reference',
 +     ['Fabrice Bellard and the QEMU Project developers'], 7),
 +    ('system/qemu-cpu-models', 'qemu-cpu-models',
 +     'QEMU CPU Models',
 +     ['The QEMU Project developers'], 7),
 +    ('tools/qemu-img', 'qemu-img',
 +     'QEMU disk image utility',
 +     ['Fabrice Bellard'], 1),
 +    ('tools/qemu-nbd', 'qemu-nbd',
 +     'QEMU Disk Network Block Device Server',
 +     ['Anthony Liguori <anthony@codemonkey.ws>'], 8),
 +    ('tools/qemu-pr-helper', 'qemu-pr-helper',
 +     'QEMU persistent reservation helper',
 +     [], 8),
 +    ('tools/qemu-storage-daemon', 'qemu-storage-daemon',
 +     'QEMU storage daemon',
 +     [], 1),
 +    ('tools/qemu-trace-stap', 'qemu-trace-stap',
 +     'QEMU SystemTap trace tool',
 +     [], 1),
 +    ('tools/virtfs-proxy-helper', 'virtfs-proxy-helper',
 +     'QEMU 9p virtfs proxy filesystem helper',
 +     ['M. Mohan Kumar'], 1),
 +    ('tools/virtiofsd', 'virtiofsd',
 +     'QEMU virtio-fs shared file system daemon',
 +     ['Stefan Hajnoczi <stefanha@redhat.com>',
 +      'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
 +]
  # -- Options for Texinfo output -------------------------------------------
 diff --git a/docs/devel/conf.py b/docs/devel/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/devel/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'devel' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = u'Developer''s Guide'
 diff --git a/docs/index.html.in b/docs/index.html.in
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/index.html.in
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -<!DOCTYPE html>
 -<html lang="en">
 -    <head>
 -        <meta charset="UTF-8">
 -        <title>QEMU @VERSION@ Documentation</title>
 -    </head>
 -    <body>
 -        <h1>QEMU @VERSION@ Documentation</h1>
 -        <ul>
 -            <li><a href="system/index.html">System Emulation User's Guide</a></li>
 -            <li><a href="user/index.html">User Mode Emulation User's Guide</a></li>
 -            <li><a href="tools/index.html">Tools Guide</a></li>
 -            <li><a href="interop/index.html">System Emulation Management and Interoperability Guide</a></li>
 -            <li><a href="specs/index.html">System Emulation Guest Hardware Specifications</a></li>
 -        </ul>
 -    </body>
 -</html>
 diff --git a/docs/interop/conf.py b/docs/interop/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/interop/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'interop' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = u'System Emulation Management and Interoperability Guide'
 -
 -# One entry per manual page. List of tuples
 -# (source start file, name, description, authors, manual section).
 -man_pages = [
 -    ('qemu-ga', 'qemu-ga', u'QEMU Guest Agent',
 -     ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
 -    ('qemu-ga-ref', 'qemu-ga-ref', 'QEMU Guest Agent Protocol Reference',
 -     [], 7),
 -    ('qemu-qmp-ref', 'qemu-qmp-ref', 'QEMU QMP Reference Manual',
 -     [], 7),
 -    ('qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
 -     'QEMU Storage Daemon QMP Reference Manual', [], 7),
 -]
 diff --git a/docs/meson.build b/docs/meson.build
 index XXXXXXX..XXXXXXX 100644
 --- a/docs/meson.build
 +++ b/docs/meson.build
@@ -XXX,XX +XXX,XX @@ if build_docs
                            meson.source_root() / 'docs/sphinx/qmp_lexer.py',
                            qapi_gen_depends ]
 -  configure_file(output: 'index.html',
 -                 input: files('index.html.in'),
 -                 configuration: {'VERSION': meson.project_version()},
 -                 install_dir: qemu_docdir)
 -  manuals = [ 'devel', 'interop', 'tools', 'specs', 'system', 'user' ]
    man_pages = {
 -    'interop' : {
          'qemu-ga.8': (have_tools ? 'man8' : ''),
          'qemu-ga-ref.7': 'man7',
          'qemu-qmp-ref.7': 'man7',
          'qemu-storage-daemon-qmp-ref.7': (have_tools ? 'man7' : ''),
 -    },
 -    'tools': {
          'qemu-img.1': (have_tools ? 'man1' : ''),
          'qemu-nbd.8': (have_tools ? 'man8' : ''),
          'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
@@ -XXX,XX +XXX,XX @@ if build_docs
          'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
          'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
          'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
 -    },
 -    'system': {
          'qemu.1': 'man1',
          'qemu-block-drivers.7': 'man7',
          'qemu-cpu-models.7': 'man7'
 -    },
    }
    sphinxdocs = []
    sphinxmans = []
 -  foreach manual : manuals
 -    private_dir = meson.current_build_dir() / (manual + '.p')
 -    output_dir = meson.current_build_dir() / manual
 -    input_dir = meson.current_source_dir() / manual
 -    this_manual = custom_target(manual + ' manual',
 +  private_dir = meson.current_build_dir() / 'manual.p'
 +  output_dir = meson.current_build_dir() / 'manual'
 +  input_dir = meson.current_source_dir()
 +
 +  this_manual = custom_target('QEMU manual',
                  build_by_default: build_docs,
 -                output: [manual + '.stamp'],
 -                input: [files('conf.py'), files(manual / 'conf.py')],
 -                depfile: manual + '.d',
 +                output: 'docs.stamp',
 +                input: files('conf.py'),
 +                depfile: 'docs.d',
                  depend_files: sphinx_extn_depends,
                  command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@',
                            '-Ddepfile_stamp=@OUTPUT0@',
                            '-b', 'html', '-d', private_dir,
                            input_dir, output_dir])
 -    sphinxdocs += this_manual
 -    if build_docs and manual != 'devel'
 -      install_subdir(output_dir, install_dir: qemu_docdir)
 -    endif
 +  sphinxdocs += this_manual
 +  install_subdir(output_dir, install_dir: qemu_docdir, strip_directory: true)
 -    these_man_pages = []
 -    install_dirs = []
 -    foreach page, section : man_pages.get(manual, {})
 -      these_man_pages += page
 -      install_dirs += section == '' ? false : get_option('mandir') / section
 -    endforeach
 -    if these_man_pages.length() > 0
 -      sphinxmans += custom_target(manual + ' man pages',
 -                         build_by_default: build_docs,
 -                         output: these_man_pages,
 -                         input: this_manual,
 -                         install: build_docs,
 -                         install_dir: install_dirs,
 -                         command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
 -                                   input_dir, meson.current_build_dir()])
 -    endif
 +  these_man_pages = []
 +  install_dirs = []
 +  foreach page, section : man_pages
 +    these_man_pages += page
 +    install_dirs += section == '' ? false : get_option('mandir') / section
    endforeach
 +
 +  sphinxmans += custom_target('QEMU man pages',
 +                              build_by_default: build_docs,
 +                              output: these_man_pages,
 +                              input: this_manual,
 +                              install: build_docs,
 +                              install_dir: install_dirs,
 +                              command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
 +                                        input_dir, meson.current_build_dir()])
 +
    alias_target('sphinxdocs', sphinxdocs)
    alias_target('html', sphinxdocs)
    alias_target('man', sphinxmans)
 diff --git a/docs/specs/conf.py b/docs/specs/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/specs/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'specs' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = \
 -    u'System Emulation Guest Hardware Specifications'
 diff --git a/docs/system/conf.py b/docs/system/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/system/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'system' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = u'System Emulation User''s Guide'
 -
 -# One entry per manual page. List of tuples
 -# (source start file, name, description, authors, manual section).
 -man_pages = [
 -    ('qemu-manpage', 'qemu', u'QEMU User Documentation',
 -     ['Fabrice Bellard'], 1),
 -    ('qemu-block-drivers', 'qemu-block-drivers',
 -     u'QEMU block drivers reference',
 -     ['Fabrice Bellard and the QEMU Project developers'], 7),
 -    ('qemu-cpu-models', 'qemu-cpu-models',
 -     u'QEMU CPU Models',
 -     ['The QEMU Project developers'], 7)
 -]
 diff --git a/docs/tools/conf.py b/docs/tools/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/tools/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'tools' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = \
 -    u'Tools Guide'
 -
 -# One entry per manual page. List of tuples
 -# (source start file, name, description, authors, manual section).
 -man_pages = [
 -    ('qemu-img', 'qemu-img', u'QEMU disk image utility',
 -     ['Fabrice Bellard'], 1),
 -    ('qemu-storage-daemon', 'qemu-storage-daemon', u'QEMU storage daemon',
 -     [], 1),
 -    ('qemu-nbd', 'qemu-nbd', u'QEMU Disk Network Block Device Server',
 -     ['Anthony Liguori <anthony@codemonkey.ws>'], 8),
 -    ('qemu-pr-helper', 'qemu-pr-helper', 'QEMU persistent reservation helper',
 -     [], 8),
 -    ('qemu-trace-stap', 'qemu-trace-stap', u'QEMU SystemTap trace tool',
 -     [], 1),
 -    ('virtfs-proxy-helper', 'virtfs-proxy-helper',
 -     u'QEMU 9p virtfs proxy filesystem helper',
 -     ['M. Mohan Kumar'], 1),
 -    ('virtiofsd', 'virtiofsd', u'QEMU virtio-fs shared file system daemon',
 -     ['Stefan Hajnoczi <stefanha@redhat.com>',
 -      'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
 -]
 diff --git a/docs/user/conf.py b/docs/user/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/user/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'user' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = u'User Mode Emulation User''s Guide'
 --
 .20.1

-New patch
+[PULL 12/21] target/arm: Don't decode insns in the XScale/iWMMXt space as cp insns
+In commit cd8be50e58f63413c0 we converted the A32 coprocessor
+insns to decodetree. This accidentally broke XScale/iWMMXt insns,
+because it moved the handling of "cp insns which are handled
+by looking up the cp register in the hashtable" from after the
+call to the legacy disas_xscale_insn() decode to before it,
+with the result that all XScale/iWMMXt insns now UNDEF.
+Update valid_cp() so that it knows that on XScale cp 0 and 1
+are not standard coprocessor instructions; this will cause
+the decodetree trans_ functions to ignore them, so that
+execution will correctly get through to the legacy decode again.
+Cc: qemu-stable@nongnu.org
+Reported-by: Guenter Roeck <linux@roeck-us.net>
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
+Tested-by: Guenter Roeck <linux@roeck-us.net>
+Message-id: 20210108195157.32067-1-peter.maydell@linaro.org
+---
+ target/arm/translate.c | 7 +++++++
+file changed, 7 insertions(+)
+diff --git a/target/arm/translate.c b/target/arm/translate.c
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/translate.c
++++ b/target/arm/translate.c
+@@ -XXX,XX +XXX,XX @@ static bool valid_cp(DisasContext *s, int cp)
+      * only cp14 and cp15 are valid, and other values aren't considered
+      * to be in the coprocessor-instruction space at all. v8M still
+      * permits coprocessors 0..7.
++     * For XScale, we must not decode the XScale cp0, cp1 space as
++     * a standard coprocessor insn, because we want to fall through to
++     * the legacy disas_xscale_insn() decoder after decodetree is done.
+      */
++    if (arm_dc_feature(s, ARM_FEATURE_XSCALE) && (cp == 0 || cp == 1)) {
++        return false;
++    }
++
+     if (arm_dc_feature(s, ARM_FEATURE_V8) &&
+         !arm_dc_feature(s, ARM_FEATURE_M)) {
+         return cp >= 14;
+--
+.20.1

-New patch
+[PULL 13/21] hw/net/lan9118: Fix RX Status FIFO PEEK value
+A copy-and-paste error meant that the return value for register offset 0x44
+(the RX Status FIFO PEEK register) returned a byte from a bogus offset in
+the rx status FIFO. Fix the typo.
+Cc: qemu-stable@nongnu.org
+Fixes: https://bugs.launchpad.net/qemu/+bug/1904954
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
+Message-id: 20210108180401.2263-2-peter.maydell@linaro.org
+---
+ hw/net/lan9118.c | 2 +-
+file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/net/lan9118.c
++++ b/hw/net/lan9118.c
+@@ -XXX,XX +XXX,XX @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset,
+     case 0x40:
+         return rx_status_fifo_pop(s);
+     case 0x44:
+-        return s->rx_status_fifo[s->tx_status_fifo_head];
++        return s->rx_status_fifo[s->rx_status_fifo_head];
+     case 0x48:
+         return tx_status_fifo_pop(s);
+     case 0x4c:
+--
+.20.1

-New patch
+[PULL 14/21] hw/net/lan9118: Add symbolic constants for register offsets
+The lan9118 code mostly uses symbolic constants for register offsets;
+the exceptions are those which the datasheet doesn't give an official
+symbolic name to.
+Add some names for the registers which don't already have them, based
+on the longer names they are given in the memory map.
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
+Message-id: 20210108180401.2263-3-peter.maydell@linaro.org
+---
+ hw/net/lan9118.c | 24 ++++++++++++++++++------
+file changed, 18 insertions(+), 6 deletions(-)
+diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/net/lan9118.c
++++ b/hw/net/lan9118.c
+@@ -XXX,XX +XXX,XX @@ do { hw_error("lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
+ do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
+ #endif
++/* The tx and rx fifo ports are a range of aliased 32-bit registers */
++#define RX_DATA_FIFO_PORT_FIRST 0x00
++#define RX_DATA_FIFO_PORT_LAST 0x1f
++#define TX_DATA_FIFO_PORT_FIRST 0x20
++#define TX_DATA_FIFO_PORT_LAST 0x3f
++
++#define RX_STATUS_FIFO_PORT 0x40
++#define RX_STATUS_FIFO_PEEK 0x44
++#define TX_STATUS_FIFO_PORT 0x48
++#define TX_STATUS_FIFO_PEEK 0x4c
++
+ #define CSR_ID_REV      0x50
+ #define CSR_IRQ_CFG     0x54
+ #define CSR_INT_STS     0x58
+@@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset,
+     offset &= 0xff;
+     //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
+-    if (offset >= 0x20 && offset < 0x40) {
++    if (offset >= TX_DATA_FIFO_PORT_FIRST &&
++        offset <= TX_DATA_FIFO_PORT_LAST) {
+         /* TX FIFO */
+         tx_fifo_push(s, val);
+         return;
+@@ -XXX,XX +XXX,XX @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset,
+     lan9118_state *s = (lan9118_state *)opaque;
+     //DPRINTF("Read reg 0x%02x\n", (int)offset);
+-    if (offset < 0x20) {
++    if (offset <= RX_DATA_FIFO_PORT_LAST) {
+         /* RX FIFO */
+         return rx_fifo_pop(s);
+     }
+     switch (offset) {
+-    case 0x40:
++    case RX_STATUS_FIFO_PORT:
+         return rx_status_fifo_pop(s);
+-    case 0x44:
++    case RX_STATUS_FIFO_PEEK:
+         return s->rx_status_fifo[s->rx_status_fifo_head];
+-    case 0x48:
++    case TX_STATUS_FIFO_PORT:
+         return tx_status_fifo_pop(s);
+-    case 0x4c:
++    case TX_STATUS_FIFO_PEEK:
+         return s->tx_status_fifo[s->tx_status_fifo_head];
+     case CSR_ID_REV:
+         return 0x01180001;
+--
+.20.1

-[PULL 2/3] Remove unassigned_access CPU hook
+[PULL 15/21] hw/misc: Add clock converter in NPCM7XX CLK module
-All targets have now migrated away from the old unassigned_access
+From: Hao Wu <wuhaotsh@google.com>
 hook to the new do_transaction_failed hook. This means we can remove
 the core-code infrastructure for that hook and the code that calls it.
+This patch allows NPCM7XX CLK module to compute clocks that are used by
+other NPCM7XX modules.
+Add a new struct NPCM7xxClockConverterState which represents a
+single converter.  Each clock converter in CLK module represents one
+converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter
+takes one or more input clocks and converts them into one output clock.
+They form a clock hierarchy in the CLK module and are responsible for
+outputing clocks for various other modules in an NPCM7XX SoC.
+Each converter has a function pointer called "convert" which represents
+the unique logic for that converter.
+The clock contains two initialization information: ConverterInitInfo and
+ConverterConnectionInfo. They represent the vertices and edges in the
+clock diagram respectively.
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Message-id: 20210108190945.949196-2-wuhaotsh@google.com
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
-Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
-Message-id: 20191108173732.11816-1-peter.maydell@linaro.org
 ---
- include/hw/core/cpu.h | 24 ------------------------
+ include/hw/misc/npcm7xx_clk.h | 140 +++++-
- accel/tcg/cputlb.c    |  2 --
+ hw/misc/npcm7xx_clk.c         | 805 +++++++++++++++++++++++++++++++++-
- memory.c              |  7 -------
+files changed, 932 insertions(+), 13 deletions(-)
 files changed, 33 deletions(-)
-diff --git a/include/hw/core/cpu.h b/include/hw/core/cpu.h
+diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
 index XXXXXXX..XXXXXXX 100644
---- a/include/hw/core/cpu.h
+--- a/include/hw/misc/npcm7xx_clk.h
-+++ b/include/hw/core/cpu.h
++++ b/include/hw/misc/npcm7xx_clk.h
-@@ -XXX,XX +XXX,XX @@ typedef enum MMUAccessType {
+@@ -XXX,XX +XXX,XX @@
+ #define NPCM7XX_CLK_H
- typedef struct CPUWatchpoint CPUWatchpoint;
+ #include "exec/memory.h"
--typedef void (*CPUUnassignedAccess)(CPUState *cpu, hwaddr addr,
++#include "hw/clock.h"
--                                    bool is_write, bool is_exec, int opaque,
+ #include "hw/sysbus.h"
--                                    unsigned size);
  /*
@@ -XXX,XX +XXX,XX @@
  #define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in"
 -typedef struct NPCM7xxCLKState {
 +/* Maximum amount of clock inputs in a SEL module. */
 +#define NPCM7XX_CLK_SEL_MAX_INPUT 5
 +
 +/* PLLs in CLK module. */
 +typedef enum NPCM7xxClockPLL {
 +    NPCM7XX_CLOCK_PLL0,
 +    NPCM7XX_CLOCK_PLL1,
 +    NPCM7XX_CLOCK_PLL2,
 +    NPCM7XX_CLOCK_PLLG,
 +    NPCM7XX_CLOCK_NR_PLLS,
 +} NPCM7xxClockPLL;
 +
 +/* SEL/MUX in CLK module. */
 +typedef enum NPCM7xxClockSEL {
 +    NPCM7XX_CLOCK_PIXCKSEL,
 +    NPCM7XX_CLOCK_MCCKSEL,
 +    NPCM7XX_CLOCK_CPUCKSEL,
 +    NPCM7XX_CLOCK_CLKOUTSEL,
 +    NPCM7XX_CLOCK_UARTCKSEL,
 +    NPCM7XX_CLOCK_TIMCKSEL,
 +    NPCM7XX_CLOCK_SDCKSEL,
 +    NPCM7XX_CLOCK_GFXMSEL,
 +    NPCM7XX_CLOCK_SUCKSEL,
 +    NPCM7XX_CLOCK_NR_SELS,
 +} NPCM7xxClockSEL;
 +
 +/* Dividers in CLK module. */
 +typedef enum NPCM7xxClockDivider {
 +    NPCM7XX_CLOCK_PLL1D2, /* PLL1/2 */
 +    NPCM7XX_CLOCK_PLL2D2, /* PLL2/2 */
 +    NPCM7XX_CLOCK_MC_DIVIDER,
 +    NPCM7XX_CLOCK_AXI_DIVIDER,
 +    NPCM7XX_CLOCK_AHB_DIVIDER,
 +    NPCM7XX_CLOCK_AHB3_DIVIDER,
 +    NPCM7XX_CLOCK_SPI0_DIVIDER,
 +    NPCM7XX_CLOCK_SPIX_DIVIDER,
 +    NPCM7XX_CLOCK_APB1_DIVIDER,
 +    NPCM7XX_CLOCK_APB2_DIVIDER,
 +    NPCM7XX_CLOCK_APB3_DIVIDER,
 +    NPCM7XX_CLOCK_APB4_DIVIDER,
 +    NPCM7XX_CLOCK_APB5_DIVIDER,
 +    NPCM7XX_CLOCK_CLKOUT_DIVIDER,
 +    NPCM7XX_CLOCK_UART_DIVIDER,
 +    NPCM7XX_CLOCK_TIMER_DIVIDER,
 +    NPCM7XX_CLOCK_ADC_DIVIDER,
 +    NPCM7XX_CLOCK_MMC_DIVIDER,
 +    NPCM7XX_CLOCK_SDHC_DIVIDER,
 +    NPCM7XX_CLOCK_GFXM_DIVIDER, /* divide by 3 */
 +    NPCM7XX_CLOCK_UTMI_DIVIDER,
 +    NPCM7XX_CLOCK_NR_DIVIDERS,
 +} NPCM7xxClockConverter;
 +
 +typedef struct NPCM7xxCLKState NPCM7xxCLKState;
 +
 +/**
 + * struct NPCM7xxClockPLLState - A PLL module in CLK module.
 + * @name: The name of the module.
 + * @clk: The CLK module that owns this module.
 + * @clock_in: The input clock of this module.
 + * @clock_out: The output clock of this module.
 + * @reg: The control registers for this PLL module.
 + */
 +typedef struct NPCM7xxClockPLLState {
 +    DeviceState parent;
 +
 +    const char *name;
 +    NPCM7xxCLKState *clk;
 +    Clock *clock_in;
 +    Clock *clock_out;
 +
 +    int reg;
 +} NPCM7xxClockPLLState;
 +
 +/**
 + * struct NPCM7xxClockSELState - A SEL module in CLK module.
 + * @name: The name of the module.
 + * @clk: The CLK module that owns this module.
 + * @input_size: The size of inputs of this module.
 + * @clock_in: The input clocks of this module.
 + * @clock_out: The output clocks of this module.
 + * @offset: The offset of this module in the control register.
 + * @len: The length of this module in the control register.
 + */
 +typedef struct NPCM7xxClockSELState {
 +    DeviceState parent;
 +
 +    const char *name;
 +    NPCM7xxCLKState *clk;
 +    uint8_t input_size;
 +    Clock *clock_in[NPCM7XX_CLK_SEL_MAX_INPUT];
 +    Clock *clock_out;
 +
 +    int offset;
 +    int len;
 +} NPCM7xxClockSELState;
 +
 +/**
 + * struct NPCM7xxClockDividerState - A Divider module in CLK module.
 + * @name: The name of the module.
 + * @clk: The CLK module that owns this module.
 + * @clock_in: The input clock of this module.
 + * @clock_out: The output clock of this module.
 + * @divide: The function the divider uses to divide the input.
 + * @reg: The index of the control register that contains the divisor.
 + * @offset: The offset of the divisor in the control register.
 + * @len: The length of the divisor in the control register.
 + * @divisor: The divisor for a constant divisor
 + */
 +typedef struct NPCM7xxClockDividerState {
 +    DeviceState parent;
 +
 +    const char *name;
 +    NPCM7xxCLKState *clk;
 +    Clock *clock_in;
 +    Clock *clock_out;
 +
 +    uint32_t (*divide)(struct NPCM7xxClockDividerState *s);
 +    union {
 +        struct {
 +            int reg;
 +            int offset;
 +            int len;
 +        };
 +        int divisor;
 +    };
 +} NPCM7xxClockDividerState;
 +
 +struct NPCM7xxCLKState {
      SysBusDevice parent;
      MemoryRegion iomem;
 +    /* Clock converters */
 +    NPCM7xxClockPLLState plls[NPCM7XX_CLOCK_NR_PLLS];
 +    NPCM7xxClockSELState sels[NPCM7XX_CLOCK_NR_SELS];
 +    NPCM7xxClockDividerState dividers[NPCM7XX_CLOCK_NR_DIVIDERS];
 +
      uint32_t regs[NPCM7XX_CLK_NR_REGS];
      /* Time reference for SECCNT and CNTR25M, initialized by power on reset */
      int64_t ref_ns;
 -} NPCM7xxCLKState;
 +
 +    /* The incoming reference clock. */
 +    Clock *clkref;
 +};
  #define TYPE_NPCM7XX_CLK "npcm7xx-clk"
  #define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK)
 diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/misc/npcm7xx_clk.c
 +++ b/hw/misc/npcm7xx_clk.c
@@ -XXX,XX +XXX,XX @@
  #include "hw/misc/npcm7xx_clk.h"
  #include "hw/timer/npcm7xx_timer.h"
 +#include "hw/qdev-clock.h"
  #include "migration/vmstate.h"
  #include "qemu/error-report.h"
  #include "qemu/log.h"
@@ -XXX,XX +XXX,XX @@
  #include "trace.h"
  #include "sysemu/watchdog.h"
 +/*
 + * The reference clock hz, and the SECCNT and CNTR25M registers in this module,
 + * is always 25 MHz.
 + */
 +#define NPCM7XX_CLOCK_REF_HZ            (25000000)
 +
 +/* Register Field Definitions */
 +#define NPCM7XX_CLK_WDRCR_CA9C  BIT(0) /* Cortex A9 Cores */
 +
  #define PLLCON_LOKI     BIT(31)
  #define PLLCON_LOKS     BIT(30)
  #define PLLCON_PWDEN    BIT(12)
 +#define PLLCON_FBDV(con) extract32((con), 16, 12)
 +#define PLLCON_OTDV2(con) extract32((con), 13, 3)
 +#define PLLCON_OTDV1(con) extract32((con), 8, 3)
 +#define PLLCON_INDV(con) extract32((con), 0, 6)
  enum NPCM7xxCLKRegisters {
      NPCM7XX_CLK_CLKEN1,
@@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = {
      [NPCM7XX_CLK_AHBCKFI]       = 0x000000c8,
  };
 -/* Register Field Definitions */
 -#define NPCM7XX_CLK_WDRCR_CA9C  BIT(0) /* Cortex A9 Cores */
 -
- struct TranslationBlock;
+ /* The number of watchdogs that can trigger a reset. */
+ #define NPCM7XX_NR_WATCHDOGS    (3)
- /**
-@@ -XXX,XX +XXX,XX @@ struct TranslationBlock;
++/* Clock converter functions */
-  * @reset_dump_flags: #CPUDumpFlags to use for reset logging.
++
-  * @has_work: Callback for checking if there is work to do.
++#define TYPE_NPCM7XX_CLOCK_PLL "npcm7xx-clock-pll"
-  * @do_interrupt: Callback for interrupt handling.
++#define NPCM7XX_CLOCK_PLL(obj) OBJECT_CHECK(NPCM7xxClockPLLState, \
-- * @do_unassigned_access: Callback for unassigned access handling.
++        (obj), TYPE_NPCM7XX_CLOCK_PLL)
-- * (this is deprecated: new targets should use do_transaction_failed instead)
++#define TYPE_NPCM7XX_CLOCK_SEL "npcm7xx-clock-sel"
-  * @do_unaligned_access: Callback for unaligned access handling, if
++#define NPCM7XX_CLOCK_SEL(obj) OBJECT_CHECK(NPCM7xxClockSELState, \
-  * the target defines #TARGET_ALIGNED_ONLY.
++        (obj), TYPE_NPCM7XX_CLOCK_SEL)
-  * @do_transaction_failed: Callback for handling failed memory transactions
++#define TYPE_NPCM7XX_CLOCK_DIVIDER "npcm7xx-clock-divider"
-@@ -XXX,XX +XXX,XX @@ typedef struct CPUClass {
++#define NPCM7XX_CLOCK_DIVIDER(obj) OBJECT_CHECK(NPCM7xxClockDividerState, \
-     int reset_dump_flags;
++        (obj), TYPE_NPCM7XX_CLOCK_DIVIDER)
-     bool (*has_work)(CPUState *cpu);
++
-     void (*do_interrupt)(CPUState *cpu);
++static void npcm7xx_clk_update_pll(void *opaque)
--    CPUUnassignedAccess do_unassigned_access;
++{
-     void (*do_unaligned_access)(CPUState *cpu, vaddr addr,
++    NPCM7xxClockPLLState *s = opaque;
-                                 MMUAccessType access_type,
++    uint32_t con = s->clk->regs[s->reg];
-                                 int mmu_idx, uintptr_t retaddr);
++    uint64_t freq;
-@@ -XXX,XX +XXX,XX @@ struct CPUState {
++
-      * we store some rarely used information in the CPU context.
++    /* The PLL is grounded if it is not locked yet. */
-      */
++    if (con & PLLCON_LOKI) {
-     uintptr_t mem_io_pc;
++        freq = clock_get_hz(s->clock_in);
--    /*
++        freq *= PLLCON_FBDV(con);
--     * This is only needed for the legacy cpu_unassigned_access() hook;
++        freq /= PLLCON_INDV(con) * PLLCON_OTDV1(con) * PLLCON_OTDV2(con);
--     * when all targets using it have been converted to use
++    } else {
--     * cpu_transaction_failed() instead it can be removed.
++        freq = 0;
--     */
++    }
--    MMUAccessType mem_io_access_type;
++
++    clock_update_hz(s->clock_out, freq);
-     int kvm_fd;
++}
-     struct KVMState *kvm_state;
++
-@@ -XXX,XX +XXX,XX @@ void cpu_interrupt(CPUState *cpu, int mask);
++static void npcm7xx_clk_update_sel(void *opaque)
- #ifdef NEED_CPU_H
++{
++    NPCM7xxClockSELState *s = opaque;
- #ifdef CONFIG_SOFTMMU
++    uint32_t index = extract32(s->clk->regs[NPCM7XX_CLK_CLKSEL], s->offset,
--static inline void cpu_unassigned_access(CPUState *cpu, hwaddr addr,
++            s->len);
--                                         bool is_write, bool is_exec,
++
--                                         int opaque, unsigned size)
++    if (index >= s->input_size) {
--{
++        qemu_log_mask(LOG_GUEST_ERROR,
--    CPUClass *cc = CPU_GET_CLASS(cpu);
++                      "%s: SEL index: %u out of range\n",
--
++                      __func__, index);
--    if (cc->do_unassigned_access) {
++        index = 0;
--        cc->do_unassigned_access(cpu, addr, is_write, is_exec, opaque, size);
++    }
--    }
++    clock_update_hz(s->clock_out, clock_get_hz(s->clock_in[index]));
--}
++}
--
++
- static inline void cpu_unaligned_access(CPUState *cpu, vaddr addr,
++static void npcm7xx_clk_update_divider(void *opaque)
-                                         MMUAccessType access_type,
++{
-                                         int mmu_idx, uintptr_t retaddr)
++    NPCM7xxClockDividerState *s = opaque;
-diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
++    uint32_t freq;
-index XXXXXXX..XXXXXXX 100644
++
---- a/accel/tcg/cputlb.c
++    freq = s->divide(s);
-+++ b/accel/tcg/cputlb.c
++    clock_update_hz(s->clock_out, freq);
-@@ -XXX,XX +XXX,XX @@ static uint64_t io_readx(CPUArchState *env, CPUIOTLBEntry *iotlbentry,
++}
-         cpu_io_recompile(cpu, retaddr);
++
 +static uint32_t divide_by_constant(NPCM7xxClockDividerState *s)
 +{
 +    return clock_get_hz(s->clock_in) / s->divisor;
 +}
 +
 +static uint32_t divide_by_reg_divisor(NPCM7xxClockDividerState *s)
 +{
 +    return clock_get_hz(s->clock_in) /
 +            (extract32(s->clk->regs[s->reg], s->offset, s->len) + 1);
 +}
 +
 +static uint32_t divide_by_reg_divisor_times_2(NPCM7xxClockDividerState *s)
 +{
 +    return divide_by_reg_divisor(s) / 2;
 +}
 +
 +static uint32_t shift_by_reg_divisor(NPCM7xxClockDividerState *s)
 +{
 +    return clock_get_hz(s->clock_in) >>
 +        extract32(s->clk->regs[s->reg], s->offset, s->len);
 +}
 +
 +static NPCM7xxClockPLL find_pll_by_reg(enum NPCM7xxCLKRegisters reg)
 +{
 +    switch (reg) {
 +    case NPCM7XX_CLK_PLLCON0:
 +        return NPCM7XX_CLOCK_PLL0;
 +    case NPCM7XX_CLK_PLLCON1:
 +        return NPCM7XX_CLOCK_PLL1;
 +    case NPCM7XX_CLK_PLLCON2:
 +        return NPCM7XX_CLOCK_PLL2;
 +    case NPCM7XX_CLK_PLLCONG:
 +        return NPCM7XX_CLOCK_PLLG;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static void npcm7xx_clk_update_all_plls(NPCM7xxCLKState *clk)
 +{
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
 +        npcm7xx_clk_update_pll(&clk->plls[i]);
 +    }
 +}
 +
 +static void npcm7xx_clk_update_all_sels(NPCM7xxCLKState *clk)
 +{
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
 +        npcm7xx_clk_update_sel(&clk->sels[i]);
 +    }
 +}
 +
 +static void npcm7xx_clk_update_all_dividers(NPCM7xxCLKState *clk)
 +{
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
 +        npcm7xx_clk_update_divider(&clk->dividers[i]);
 +    }
 +}
 +
 +static void npcm7xx_clk_update_all_clocks(NPCM7xxCLKState *clk)
 +{
 +    clock_update_hz(clk->clkref, NPCM7XX_CLOCK_REF_HZ);
 +    npcm7xx_clk_update_all_plls(clk);
 +    npcm7xx_clk_update_all_sels(clk);
 +    npcm7xx_clk_update_all_dividers(clk);
 +}
 +
 +/* Types of clock sources. */
 +typedef enum ClockSrcType {
 +    CLKSRC_REF,
 +    CLKSRC_PLL,
 +    CLKSRC_SEL,
 +    CLKSRC_DIV,
 +} ClockSrcType;
 +
 +typedef struct PLLInitInfo {
 +    const char *name;
 +    ClockSrcType src_type;
 +    int src_index;
 +    int reg;
 +    const char *public_name;
 +} PLLInitInfo;
 +
 +typedef struct SELInitInfo {
 +    const char *name;
 +    uint8_t input_size;
 +    ClockSrcType src_type[NPCM7XX_CLK_SEL_MAX_INPUT];
 +    int src_index[NPCM7XX_CLK_SEL_MAX_INPUT];
 +    int offset;
 +    int len;
 +    const char *public_name;
 +} SELInitInfo;
 +
 +typedef struct DividerInitInfo {
 +    const char *name;
 +    ClockSrcType src_type;
 +    int src_index;
 +    uint32_t (*divide)(NPCM7xxClockDividerState *s);
 +    int reg; /* not used when type == CONSTANT */
 +    int offset; /* not used when type == CONSTANT */
 +    int len; /* not used when type == CONSTANT */
 +    int divisor; /* used only when type == CONSTANT */
 +    const char *public_name;
 +} DividerInitInfo;
 +
 +static const PLLInitInfo pll_init_info_list[] = {
 +    [NPCM7XX_CLOCK_PLL0] = {
 +        .name = "pll0",
 +        .src_type = CLKSRC_REF,
 +        .reg = NPCM7XX_CLK_PLLCON0,
 +    },
 +    [NPCM7XX_CLOCK_PLL1] = {
 +        .name = "pll1",
 +        .src_type = CLKSRC_REF,
 +        .reg = NPCM7XX_CLK_PLLCON1,
 +    },
 +    [NPCM7XX_CLOCK_PLL2] = {
 +        .name = "pll2",
 +        .src_type = CLKSRC_REF,
 +        .reg = NPCM7XX_CLK_PLLCON2,
 +    },
 +    [NPCM7XX_CLOCK_PLLG] = {
 +        .name = "pllg",
 +        .src_type = CLKSRC_REF,
 +        .reg = NPCM7XX_CLK_PLLCONG,
 +    },
 +};
 +
 +static const SELInitInfo sel_init_info_list[] = {
 +    [NPCM7XX_CLOCK_PIXCKSEL] = {
 +        .name = "pixcksel",
 +        .input_size = 2,
 +        .src_type = {CLKSRC_PLL, CLKSRC_REF},
 +        .src_index = {NPCM7XX_CLOCK_PLLG, 0},
 +        .offset = 5,
 +        .len = 1,
 +        .public_name = "pixel-clock",
 +    },
 +    [NPCM7XX_CLOCK_MCCKSEL] = {
 +        .name = "mccksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_DIV, CLKSRC_REF, CLKSRC_REF,
 +            /*MCBPCK, shouldn't be used in normal operation*/
 +            CLKSRC_REF},
 +        .src_index = {NPCM7XX_CLOCK_PLL1D2, 0, 0, 0},
 +        .offset = 12,
 +        .len = 2,
 +        .public_name = "mc-phy-clock",
 +    },
 +    [NPCM7XX_CLOCK_CPUCKSEL] = {
 +        .name = "cpucksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF,
 +            /*SYSBPCK, shouldn't be used in normal operation*/
 +            CLKSRC_REF},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, 0},
 +        .offset = 0,
 +        .len = 2,
 +        .public_name = "system-clock",
 +    },
 +    [NPCM7XX_CLOCK_CLKOUTSEL] = {
 +        .name = "clkoutsel",
 +        .input_size = 5,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF,
 +            CLKSRC_PLL, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLLG, NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 18,
 +        .len = 3,
 +        .public_name = "tock",
 +    },
 +    [NPCM7XX_CLOCK_UARTCKSEL] = {
 +        .name = "uartcksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 8,
 +        .len = 2,
 +    },
 +    [NPCM7XX_CLOCK_TIMCKSEL] = {
 +        .name = "timcksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 14,
 +        .len = 2,
 +    },
 +    [NPCM7XX_CLOCK_SDCKSEL] = {
 +        .name = "sdcksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 6,
 +        .len = 2,
 +    },
 +    [NPCM7XX_CLOCK_GFXMSEL] = {
 +        .name = "gfxmksel",
 +        .input_size = 2,
 +        .src_type = {CLKSRC_REF, CLKSRC_PLL},
 +        .src_index = {0, NPCM7XX_CLOCK_PLL2},
 +        .offset = 21,
 +        .len = 1,
 +    },
 +    [NPCM7XX_CLOCK_SUCKSEL] = {
 +        .name = "sucksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 10,
 +        .len = 2,
 +    },
 +};
 +
 +static const DividerInitInfo divider_init_info_list[] = {
 +    [NPCM7XX_CLOCK_PLL1D2] = {
 +        .name = "pll1d2",
 +        .src_type = CLKSRC_PLL,
 +        .src_index = NPCM7XX_CLOCK_PLL1,
 +        .divide = divide_by_constant,
 +        .divisor = 2,
 +    },
 +    [NPCM7XX_CLOCK_PLL2D2] = {
 +        .name = "pll2d2",
 +        .src_type = CLKSRC_PLL,
 +        .src_index = NPCM7XX_CLOCK_PLL2,
 +        .divide = divide_by_constant,
 +        .divisor = 2,
 +    },
 +    [NPCM7XX_CLOCK_MC_DIVIDER] = {
 +        .name = "mc-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_MCCKSEL,
 +        .divide = divide_by_constant,
 +        .divisor = 2,
 +        .public_name = "mc-clock"
 +    },
 +    [NPCM7XX_CLOCK_AXI_DIVIDER] = {
 +        .name = "axi-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_CPUCKSEL,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 0,
 +        .len = 1,
 +        .public_name = "clk2"
 +    },
 +    [NPCM7XX_CLOCK_AHB_DIVIDER] = {
 +        .name = "ahb-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AXI_DIVIDER,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 26,
 +        .len = 2,
 +        .public_name = "clk4"
 +    },
 +    [NPCM7XX_CLOCK_AHB3_DIVIDER] = {
 +        .name = "ahb3-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 6,
 +        .len = 5,
 +        .public_name = "ahb3-spi3-clock"
 +    },
 +    [NPCM7XX_CLOCK_SPI0_DIVIDER] = {
 +        .name = "spi0-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV3,
 +        .offset = 6,
 +        .len = 5,
 +        .public_name = "spi0-clock",
 +    },
 +    [NPCM7XX_CLOCK_SPIX_DIVIDER] = {
 +        .name = "spix-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV3,
 +        .offset = 1,
 +        .len = 5,
 +        .public_name = "spix-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB1_DIVIDER] = {
 +        .name = "apb1-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 24,
 +        .len = 2,
 +        .public_name = "apb1-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB2_DIVIDER] = {
 +        .name = "apb2-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 26,
 +        .len = 2,
 +        .public_name = "apb2-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB3_DIVIDER] = {
 +        .name = "apb3-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 28,
 +        .len = 2,
 +        .public_name = "apb3-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB4_DIVIDER] = {
 +        .name = "apb4-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 30,
 +        .len = 2,
 +        .public_name = "apb4-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB5_DIVIDER] = {
 +        .name = "apb5-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 22,
 +        .len = 2,
 +        .public_name = "apb5-clock",
 +    },
 +    [NPCM7XX_CLOCK_CLKOUT_DIVIDER] = {
 +        .name = "clkout-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_CLKOUTSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 16,
 +        .len = 5,
 +        .public_name = "clkout",
 +    },
 +    [NPCM7XX_CLOCK_UART_DIVIDER] = {
 +        .name = "uart-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_UARTCKSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 16,
 +        .len = 5,
 +        .public_name = "uart-clock",
 +    },
 +    [NPCM7XX_CLOCK_TIMER_DIVIDER] = {
 +        .name = "timer-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_TIMCKSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 21,
 +        .len = 5,
 +        .public_name = "timer-clock",
 +    },
 +    [NPCM7XX_CLOCK_ADC_DIVIDER] = {
 +        .name = "adc-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_TIMER_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 28,
 +        .len = 3,
 +        .public_name = "adc-clock",
 +    },
 +    [NPCM7XX_CLOCK_MMC_DIVIDER] = {
 +        .name = "mmc-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_SDCKSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 11,
 +        .len = 5,
 +        .public_name = "mmc-clock",
 +    },
 +    [NPCM7XX_CLOCK_SDHC_DIVIDER] = {
 +        .name = "sdhc-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_SDCKSEL,
 +        .divide = divide_by_reg_divisor_times_2,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 0,
 +        .len = 4,
 +        .public_name = "sdhc-clock",
 +    },
 +    [NPCM7XX_CLOCK_GFXM_DIVIDER] = {
 +        .name = "gfxm-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_GFXMSEL,
 +        .divide = divide_by_constant,
 +        .divisor = 3,
 +        .public_name = "gfxm-clock",
 +    },
 +    [NPCM7XX_CLOCK_UTMI_DIVIDER] = {
 +        .name = "utmi-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_SUCKSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 8,
 +        .len = 5,
 +        .public_name = "utmi-clock",
 +    },
 +};
 +
 +static void npcm7xx_clk_pll_init(Object *obj)
 +{
 +    NPCM7xxClockPLLState *pll = NPCM7XX_CLOCK_PLL(obj);
 +
 +    pll->clock_in = qdev_init_clock_in(DEVICE(pll), "clock-in",
 +            npcm7xx_clk_update_pll, pll);
 +    pll->clock_out = qdev_init_clock_out(DEVICE(pll), "clock-out");
 +}
 +
 +static void npcm7xx_clk_sel_init(Object *obj)
 +{
 +    int i;
 +    NPCM7xxClockSELState *sel = NPCM7XX_CLOCK_SEL(obj);
 +
 +    for (i = 0; i < NPCM7XX_CLK_SEL_MAX_INPUT; ++i) {
 +        sel->clock_in[i] = qdev_init_clock_in(DEVICE(sel),
 +                g_strdup_printf("clock-in[%d]", i),
 +                npcm7xx_clk_update_sel, sel);
 +    }
 +    sel->clock_out = qdev_init_clock_out(DEVICE(sel), "clock-out");
 +}
 +static void npcm7xx_clk_divider_init(Object *obj)
 +{
 +    NPCM7xxClockDividerState *div = NPCM7XX_CLOCK_DIVIDER(obj);
 +
 +    div->clock_in = qdev_init_clock_in(DEVICE(div), "clock-in",
 +            npcm7xx_clk_update_divider, div);
 +    div->clock_out = qdev_init_clock_out(DEVICE(div), "clock-out");
 +}
 +
 +static void npcm7xx_init_clock_pll(NPCM7xxClockPLLState *pll,
 +        NPCM7xxCLKState *clk, const PLLInitInfo *init_info)
 +{
 +    pll->name = init_info->name;
 +    pll->clk = clk;
 +    pll->reg = init_info->reg;
 +    if (init_info->public_name != NULL) {
 +        qdev_alias_clock(DEVICE(pll), "clock-out", DEVICE(clk),
 +                init_info->public_name);
 +    }
 +}
 +
 +static void npcm7xx_init_clock_sel(NPCM7xxClockSELState *sel,
 +        NPCM7xxCLKState *clk, const SELInitInfo *init_info)
 +{
 +    int input_size = init_info->input_size;
 +
 +    sel->name = init_info->name;
 +    sel->clk = clk;
 +    sel->input_size = init_info->input_size;
 +    g_assert(input_size <= NPCM7XX_CLK_SEL_MAX_INPUT);
 +    sel->offset = init_info->offset;
 +    sel->len = init_info->len;
 +    if (init_info->public_name != NULL) {
 +        qdev_alias_clock(DEVICE(sel), "clock-out", DEVICE(clk),
 +                init_info->public_name);
 +    }
 +}
 +
 +static void npcm7xx_init_clock_divider(NPCM7xxClockDividerState *div,
 +        NPCM7xxCLKState *clk, const DividerInitInfo *init_info)
 +{
 +    div->name = init_info->name;
 +    div->clk = clk;
 +
 +    div->divide = init_info->divide;
 +    if (div->divide == divide_by_constant) {
 +        div->divisor = init_info->divisor;
 +    } else {
 +        div->reg = init_info->reg;
 +        div->offset = init_info->offset;
 +        div->len = init_info->len;
 +    }
 +    if (init_info->public_name != NULL) {
 +        qdev_alias_clock(DEVICE(div), "clock-out", DEVICE(clk),
 +                init_info->public_name);
 +    }
 +}
 +
 +static Clock *npcm7xx_get_clock(NPCM7xxCLKState *clk, ClockSrcType type,
 +        int index)
 +{
 +    switch (type) {
 +    case CLKSRC_REF:
 +        return clk->clkref;
 +    case CLKSRC_PLL:
 +        return clk->plls[index].clock_out;
 +    case CLKSRC_SEL:
 +        return clk->sels[index].clock_out;
 +    case CLKSRC_DIV:
 +        return clk->dividers[index].clock_out;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static void npcm7xx_connect_clocks(NPCM7xxCLKState *clk)
 +{
 +    int i, j;
 +    Clock *src;
 +
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
 +        src = npcm7xx_get_clock(clk, pll_init_info_list[i].src_type,
 +                pll_init_info_list[i].src_index);
 +        clock_set_source(clk->plls[i].clock_in, src);
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
 +        for (j = 0; j < sel_init_info_list[i].input_size; ++j) {
 +            src = npcm7xx_get_clock(clk, sel_init_info_list[i].src_type[j],
 +                    sel_init_info_list[i].src_index[j]);
 +            clock_set_source(clk->sels[i].clock_in[j], src);
 +        }
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
 +        src = npcm7xx_get_clock(clk, divider_init_info_list[i].src_type,
 +                divider_init_info_list[i].src_index);
 +        clock_set_source(clk->dividers[i].clock_in, src);
 +    }
 +}
 +
  static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
  {
      uint32_t reg = offset / sizeof(uint32_t);
@@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
           *
           * The 4 LSBs are always zero: (1e9 / 640) << 4 = 25000000.
           */
 -        value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_TIMER_REF_HZ;
 +        value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_CLOCK_REF_HZ;
          break;
      default:
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset,
                  value |= (value & PLLCON_LOKS);
              }
          }
 +        /* Only update PLL when it is locked. */
 +        if (value & PLLCON_LOKI) {
 +            npcm7xx_clk_update_pll(&s->plls[find_pll_by_reg(reg)]);
 +        }
 +        break;
 +
 +    case NPCM7XX_CLK_CLKSEL:
 +        npcm7xx_clk_update_all_sels(s);
 +        break;
 +
 +    case NPCM7XX_CLK_CLKDIV1:
 +    case NPCM7XX_CLK_CLKDIV2:
 +    case NPCM7XX_CLK_CLKDIV3:
 +        npcm7xx_clk_update_all_dividers(s);
          break;
      case NPCM7XX_CLK_CNTR25M:
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
      case RESET_TYPE_COLD:
          memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values));
          s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 +        npcm7xx_clk_update_all_clocks(s);
          return;
      }
--    cpu->mem_io_access_type = access_type;
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
--
+                   __func__, type);
      if (mr->global_locking && !qemu_mutex_iothread_locked()) {
          qemu_mutex_lock_iothread();
          locked = true;
 diff --git a/memory.c b/memory.c
 index XXXXXXX..XXXXXXX 100644
 --- a/memory.c
 +++ b/memory.c
@@ -XXX,XX +XXX,XX @@ static uint64_t unassigned_mem_read(void *opaque, hwaddr addr,
  #ifdef DEBUG_UNASSIGNED
      printf("Unassigned mem read " TARGET_FMT_plx "\n", addr);
  #endif
 -    if (current_cpu != NULL) {
 -        bool is_exec = current_cpu->mem_io_access_type == MMU_INST_FETCH;
 -        cpu_unassigned_access(current_cpu, addr, false, is_exec, 0, size);
 -    }
      return 0;
  }
-@@ -XXX,XX +XXX,XX @@ static void unassigned_mem_write(void *opaque, hwaddr addr,
++static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s)
- #ifdef DEBUG_UNASSIGNED
++{
-     printf("Unassigned mem write " TARGET_FMT_plx " = 0x%"PRIx64"\n", addr, val);
++    int i;
- #endif
++
--    if (current_cpu != NULL) {
++    s->clkref = qdev_init_clock_in(DEVICE(s), "clkref", NULL, NULL);
--        cpu_unassigned_access(current_cpu, addr, true, false, 0, size);
++
--    }
++    /* First pass: init all converter modules */
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(pll_init_info_list) != NPCM7XX_CLOCK_NR_PLLS);
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(sel_init_info_list) != NPCM7XX_CLOCK_NR_SELS);
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(divider_init_info_list)
 +            != NPCM7XX_CLOCK_NR_DIVIDERS);
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
 +        object_initialize_child(OBJECT(s), pll_init_info_list[i].name,
 +                &s->plls[i], TYPE_NPCM7XX_CLOCK_PLL);
 +        npcm7xx_init_clock_pll(&s->plls[i], s,
 +                &pll_init_info_list[i]);
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
 +        object_initialize_child(OBJECT(s), sel_init_info_list[i].name,
 +                &s->sels[i], TYPE_NPCM7XX_CLOCK_SEL);
 +        npcm7xx_init_clock_sel(&s->sels[i], s,
 +                &sel_init_info_list[i]);
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
 +        object_initialize_child(OBJECT(s), divider_init_info_list[i].name,
 +                &s->dividers[i], TYPE_NPCM7XX_CLOCK_DIVIDER);
 +        npcm7xx_init_clock_divider(&s->dividers[i], s,
 +                &divider_init_info_list[i]);
 +    }
 +
 +    /* Second pass: connect converter modules */
 +    npcm7xx_connect_clocks(s);
 +
 +    clock_update_hz(s->clkref, NPCM7XX_CLOCK_REF_HZ);
 +}
 +
  static void npcm7xx_clk_init(Object *obj)
  {
      NPCM7xxCLKState *s = NPCM7XX_CLK(obj);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj)
      memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
                            TYPE_NPCM7XX_CLK, 4 * KiB);
      sysbus_init_mmio(&s->parent, &s->iomem);
 -    qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
 -            NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
  }
- static bool unassigned_mem_accepts(void *opaque, hwaddr addr,
+-static const VMStateDescription vmstate_npcm7xx_clk = {
 -    .name = "npcm7xx-clk",
 +static int npcm7xx_clk_post_load(void *opaque, int version_id)
 +{
 +    if (version_id >= 1) {
 +        NPCM7xxCLKState *clk = opaque;
 +
 +        npcm7xx_clk_update_all_clocks(clk);
 +    }
 +
 +    return 0;
 +}
 +
 +static void npcm7xx_clk_realize(DeviceState *dev, Error **errp)
 +{
 +    int i;
 +    NPCM7xxCLKState *s = NPCM7XX_CLK(dev);
 +
 +    qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
 +            NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
 +    npcm7xx_clk_init_clock_hierarchy(s);
 +
 +    /* Realize child devices */
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
 +        if (!qdev_realize(DEVICE(&s->plls[i]), NULL, errp)) {
 +            return;
 +        }
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
 +        if (!qdev_realize(DEVICE(&s->sels[i]), NULL, errp)) {
 +            return;
 +        }
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
 +        if (!qdev_realize(DEVICE(&s->dividers[i]), NULL, errp)) {
 +            return;
 +        }
 +    }
 +}
 +
 +static const VMStateDescription vmstate_npcm7xx_clk_pll = {
 +    .name = "npcm7xx-clock-pll",
      .version_id = 0,
      .minimum_version_id = 0,
 -    .fields = (VMStateField[]) {
 -        VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
 -        VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
 +    .fields =  (VMStateField[]) {
 +        VMSTATE_CLOCK(clock_in, NPCM7xxClockPLLState),
          VMSTATE_END_OF_LIST(),
      },
  };
 +static const VMStateDescription vmstate_npcm7xx_clk_sel = {
 +    .name = "npcm7xx-clock-sel",
 +    .version_id = 0,
 +    .minimum_version_id = 0,
 +    .fields =  (VMStateField[]) {
 +        VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(clock_in, NPCM7xxClockSELState,
 +                NPCM7XX_CLK_SEL_MAX_INPUT, 0, vmstate_clock, Clock),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static const VMStateDescription vmstate_npcm7xx_clk_divider = {
 +    .name = "npcm7xx-clock-divider",
 +    .version_id = 0,
 +    .minimum_version_id = 0,
 +    .fields =  (VMStateField[]) {
 +        VMSTATE_CLOCK(clock_in, NPCM7xxClockDividerState),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static const VMStateDescription vmstate_npcm7xx_clk = {
 +    .name = "npcm7xx-clk",
 +    .version_id = 1,
 +    .minimum_version_id = 1,
 +    .post_load = npcm7xx_clk_post_load,
 +    .fields = (VMStateField[]) {
 +        VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
 +        VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
 +        VMSTATE_CLOCK(clkref, NPCM7xxCLKState),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static void npcm7xx_clk_pll_class_init(ObjectClass *klass, void *data)
 +{
 +    DeviceClass *dc = DEVICE_CLASS(klass);
 +
 +    dc->desc = "NPCM7xx Clock PLL Module";
 +    dc->vmsd = &vmstate_npcm7xx_clk_pll;
 +}
 +
 +static void npcm7xx_clk_sel_class_init(ObjectClass *klass, void *data)
 +{
 +    DeviceClass *dc = DEVICE_CLASS(klass);
 +
 +    dc->desc = "NPCM7xx Clock SEL Module";
 +    dc->vmsd = &vmstate_npcm7xx_clk_sel;
 +}
 +
 +static void npcm7xx_clk_divider_class_init(ObjectClass *klass, void *data)
 +{
 +    DeviceClass *dc = DEVICE_CLASS(klass);
 +
 +    dc->desc = "NPCM7xx Clock Divider Module";
 +    dc->vmsd = &vmstate_npcm7xx_clk_divider;
 +}
 +
  static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
  {
      ResettableClass *rc = RESETTABLE_CLASS(klass);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
      dc->desc = "NPCM7xx Clock Control Registers";
      dc->vmsd = &vmstate_npcm7xx_clk;
 +    dc->realize = npcm7xx_clk_realize;
      rc->phases.enter = npcm7xx_clk_enter_reset;
  }
 +static const TypeInfo npcm7xx_clk_pll_info = {
 +    .name               = TYPE_NPCM7XX_CLOCK_PLL,
 +    .parent             = TYPE_DEVICE,
 +    .instance_size      = sizeof(NPCM7xxClockPLLState),
 +    .instance_init      = npcm7xx_clk_pll_init,
 +    .class_init         = npcm7xx_clk_pll_class_init,
 +};
 +
 +static const TypeInfo npcm7xx_clk_sel_info = {
 +    .name               = TYPE_NPCM7XX_CLOCK_SEL,
 +    .parent             = TYPE_DEVICE,
 +    .instance_size      = sizeof(NPCM7xxClockSELState),
 +    .instance_init      = npcm7xx_clk_sel_init,
 +    .class_init         = npcm7xx_clk_sel_class_init,
 +};
 +
 +static const TypeInfo npcm7xx_clk_divider_info = {
 +    .name               = TYPE_NPCM7XX_CLOCK_DIVIDER,
 +    .parent             = TYPE_DEVICE,
 +    .instance_size      = sizeof(NPCM7xxClockDividerState),
 +    .instance_init      = npcm7xx_clk_divider_init,
 +    .class_init         = npcm7xx_clk_divider_class_init,
 +};
 +
  static const TypeInfo npcm7xx_clk_info = {
      .name               = TYPE_NPCM7XX_CLK,
      .parent             = TYPE_SYS_BUS_DEVICE,
@@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_clk_info = {
  static void npcm7xx_clk_register_type(void)
  {
 +    type_register_static(&npcm7xx_clk_pll_info);
 +    type_register_static(&npcm7xx_clk_sel_info);
 +    type_register_static(&npcm7xx_clk_divider_info);
      type_register_static(&npcm7xx_clk_info);
  }
  type_init(npcm7xx_clk_register_type);
 --
 .20.1

-[PULL 1/3] ptimer: Remove old ptimer_init_with_bh() API
+[PULL 16/21] hw/timer: Refactor NPCM7XX Timer to use CLK clock
-Now all the users of ptimers have converted to the transaction-based
+From: Hao Wu <wuhaotsh@google.com>
 API, we can remove ptimer_init_with_bh() and all the code paths
 that are used only by bottom-half based ptimers, and tidy up the
 documentation comments to consider the transaction-based API the
 only possibility.
-The code changes result from:
+This patch makes NPCM7XX Timer to use a the timer clock generated by the
- * s->bh no longer exists
+CLK module instead of the magic number TIMER_REF_HZ.
  * s->callback is now always non-NULL
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Message-id: 20210108190945.949196-3-wuhaotsh@google.com
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
-Message-id: 20191025142411.17085-1-peter.maydell@linaro.org
 ---
- include/hw/ptimer.h | 45 +++++++++++-----------
+ include/hw/misc/npcm7xx_clk.h    |  6 -----
- hw/core/ptimer.c    | 91 ++++++++-------------------------------------
+ include/hw/timer/npcm7xx_timer.h |  1 +
-files changed, 36 insertions(+), 100 deletions(-)
+ hw/arm/npcm7xx.c                 |  5 ++++
  hw/timer/npcm7xx_timer.c         | 39 +++++++++++++++-----------------
 files changed, 24 insertions(+), 27 deletions(-)
-diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h
+diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
 index XXXXXXX..XXXXXXX 100644
---- a/include/hw/ptimer.h
+--- a/include/hw/misc/npcm7xx_clk.h
-+++ b/include/hw/ptimer.h
++++ b/include/hw/misc/npcm7xx_clk.h
 @@ -XXX,XX +XXX,XX @@
+ #include "hw/clock.h"
- #include "qemu/timer.h"
+ #include "hw/sysbus.h"
--/* The ptimer API implements a simple periodic countdown timer.
+-/*
-+/*
+- * The reference clock frequency for the timer modules, and the SECCNT and
-+ * The ptimer API implements a simple periodic countdown timer.
+- * CNTR25M registers in this module, is always 25 MHz.
-  * The countdown timer has a value (which can be read and written via
+- */
-  * ptimer_get_count() and ptimer_set_count()). When it is enabled
+-#define NPCM7XX_TIMER_REF_HZ            (25000000)
-  * using ptimer_run(), the value will count downwards at the frequency
+-
-  * which has been configured using ptimer_set_period() or ptimer_set_freq().
+ /*
-- * When it reaches zero it will trigger a QEMU bottom half handler, and
+  * Number of registers in our device state structure. Don't change this without
-+ * When it reaches zero it will trigger a callback function, and
+  * incrementing the version_id in the vmstate.
-  * can be set to either reload itself from a specified limit value
+diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h
-  * and keep counting down, or to stop (as a one-shot timer).
+index XXXXXXX..XXXXXXX 100644
-  *
+--- a/include/hw/timer/npcm7xx_timer.h
-+ * A transaction-based API is used for modifying ptimer state: all calls
++++ b/include/hw/timer/npcm7xx_timer.h
-+ * to functions which modify ptimer state must be between matched calls to
+@@ -XXX,XX +XXX,XX @@ struct NPCM7xxTimerCtrlState {
-+ * ptimer_transaction_begin() and ptimer_transaction_commit().
-+ * When ptimer_transaction_commit() is called it will evaluate the state
+     uint32_t    tisr;
-+ * of the timer after all the changes in the transaction, and call the
-+ * callback if necessary. (See the ptimer_init() documentation for the full
++    Clock       *clock;
-+ * list of state-modifying functions and detailed semantics of the callback.)
+     NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL];
-+ *
+     NPCM7xxWatchdogTimer watchdog_timer;
-  * Forgetting to set the period/frequency (or setting it to zero) is a
+ };
-  * bug in the QEMU device and will cause warning messages to be printed
+diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
-  * to stderr when the guest attempts to enable the timer.
+index XXXXXXX..XXXXXXX 100644
 --- a/hw/arm/npcm7xx.c
 +++ b/hw/arm/npcm7xx.c
 @@ -XXX,XX +XXX,XX @@
-  * ptimer_set_count() or ptimer_set_limit() will not trigger the timer
+ #include "hw/char/serial.h"
-  * (though it will cause a reload). Only a counter decrement to "0"
+ #include "hw/loader.h"
-  * will cause a trigger. Not compatible with NO_IMMEDIATE_TRIGGER;
+ #include "hw/misc/unimp.h"
-- * ptimer_init_with_bh() will assert() that you don't set both.
++#include "hw/qdev-clock.h"
-+ * ptimer_init() will assert() that you don't set both.
+ #include "hw/qdev-properties.h"
-  */
+ #include "qapi/error.h"
- #define PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT (1 << 5)
+ #include "qemu/units.h"
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
          int first_irq;
          int j;
 +        /* Connect the timer clock. */
 +        qdev_connect_clock_in(DEVICE(&s->tim[i]), "clock", qdev_get_clock_out(
 +                    DEVICE(&s->clk), "timer-clock"));
 +
          sysbus_realize(sbd, &error_abort);
          sysbus_mmio_map(sbd, 0, npcm7xx_tim_addr[i]);
 diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/timer/npcm7xx_timer.c
 +++ b/hw/timer/npcm7xx_timer.c
 @@ -XXX,XX +XXX,XX @@
- typedef struct ptimer_state ptimer_state;
+ #include "qemu/osdep.h"
- typedef void (*ptimer_cb)(void *opaque);
+ #include "hw/irq.h"
--/**
++#include "hw/qdev-clock.h"
-- * ptimer_init_with_bh - Allocate and return a new ptimer
+ #include "hw/qdev-properties.h"
-- * @bh: QEMU bottom half which is run on timer expiry
+-#include "hw/misc/npcm7xx_clk.h"
-- * @policy: PTIMER_POLICY_* bits specifying behaviour
+ #include "hw/timer/npcm7xx_timer.h"
-- *
+ #include "migration/vmstate.h"
-- * The ptimer returned must be freed using ptimer_free().
+ #include "qemu/bitops.h"
-- * The ptimer takes ownership of @bh and will delete it
+@@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_tcsr_prescaler(uint32_t tcsr)
-- * when the ptimer is eventually freed.
+ /* Convert a timer cycle count to a time interval in nanoseconds. */
-- */
+ static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count)
--ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask);
+ {
 -    int64_t ns = count;
 +    int64_t ticks = count;
 -    ns *= NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ;
 -    ns *= npcm7xx_tcsr_prescaler(t->tcsr);
 +    ticks *= npcm7xx_tcsr_prescaler(t->tcsr);
 -    return ns;
 +    return clock_ticks_to_ns(t->ctrl->clock, ticks);
  }
  /* Convert a time interval in nanoseconds to a timer cycle count. */
  static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns)
  {
 -    int64_t count;
 -
- /**
+-    count = ns / (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ);
-  * ptimer_init - Allocate and return a new ptimer
+-    count /= npcm7xx_tcsr_prescaler(t->tcsr);
-  * @callback: function to call on ptimer expiry
+-
-@@ -XXX,XX +XXX,XX @@ ptimer_state *ptimer_init(ptimer_cb callback,
+-    return count;
-  * ptimer_free - Free a ptimer
++    return ns / clock_ticks_to_ns(t->ctrl->clock,
-  * @s: timer to free
++                                  npcm7xx_tcsr_prescaler(t->tcsr));
-  *
+ }
-- * Free a ptimer created using ptimer_init_with_bh() (including
-- * deleting the bottom half which it is using).
+ static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t)
-+ * Free a ptimer created using ptimer_init().
+@@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t)
-  */
+ static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t,
- void ptimer_free(ptimer_state *s);
+         int64_t cycles)
@@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s);
   * may be more appropriate.
   *
   * This function will assert if it is called outside a
 - * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
 + * ptimer_transaction_begin/commit block.
   */
  void ptimer_set_period(ptimer_state *s, int64_t period);
@@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period);
   * precise to fractions of a nanosecond, avoiding rounding errors.
   *
   * This function will assert if it is called outside a
 - * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
 + * ptimer_transaction_begin/commit block.
   */
  void ptimer_set_freq(ptimer_state *s, uint32_t freq);
@@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_limit(ptimer_state *s);
   * reload the counter when their reload register is written to.
   *
   * This function will assert if it is called outside a
 - * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
 + * ptimer_transaction_begin/commit block.
   */
  void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload);
@@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_count(ptimer_state *s);
   * point in the future.
   *
   * This function will assert if it is called outside a
 - * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
 + * ptimer_transaction_begin/commit block.
   */
  void ptimer_set_count(ptimer_state *s, uint64_t count);
@@ -XXX,XX +XXX,XX @@ void ptimer_set_count(ptimer_state *s, uint64_t count);
   * @s: ptimer
   * @oneshot: non-zero if this timer should only count down once
   *
 - * Start a ptimer counting down; when it reaches zero the bottom half
 - * passed to ptimer_init_with_bh() will be invoked.
 + * Start a ptimer counting down; when it reaches zero the callback function
 + * passed to ptimer_init() will be invoked.
   * If the @oneshot argument is zero,
   * the counter value will then be reloaded from the limit and it will
   * start counting down again. If @oneshot is non-zero, then the counter
   * will disable itself when it reaches zero.
   *
   * This function will assert if it is called outside a
 - * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
 + * ptimer_transaction_begin/commit block.
   */
  void ptimer_run(ptimer_state *s, int oneshot);
@@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot);
   * restarted.
   *
   * This function will assert if it is called outside a
 - * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
 + * ptimer_transaction_begin/commit block.
   */
  void ptimer_stop(ptimer_state *s);
 diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/core/ptimer.c
 +++ b/hw/core/ptimer.c
@@ -XXX,XX +XXX,XX @@ struct ptimer_state
      int64_t last_event;
      int64_t next_event;
      uint8_t policy_mask;
 -    QEMUBH *bh;
      QEMUTimer *timer;
      ptimer_cb callback;
      void *callback_opaque;
@@ -XXX,XX +XXX,XX @@ struct ptimer_state
  /* Use a bottom-half routine to avoid reentrancy issues.  */
  static void ptimer_trigger(ptimer_state *s)
  {
--    if (s->bh) {
+-    uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t);
--        replay_bh_schedule_event(s->bh);
+-    int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles;
--    }
++    int64_t ticks = cycles * npcm7xx_watchdog_timer_prescaler(t);
--    if (s->callback) {
++    int64_t ns = clock_ticks_to_ns(t->ctrl->clock, ticks);
--        s->callback(s->callback_opaque);
--    }
+     /*
-+    s->callback(s->callback_opaque);
+      * The reset function always clears the current timer. The caller of the
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t,
       */
      npcm7xx_timer_clear(&t->base_timer);
 -    ns *= prescaler;
      t->base_timer.remaining_ns = ns;
  }
- static void ptimer_reload(ptimer_state *s, int delta_adjust)
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_hold_reset(Object *obj)
-@@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_count(ptimer_state *s)
+     qemu_irq_lower(s->watchdog_timer.irq);
+ }
- void ptimer_set_count(ptimer_state *s, uint64_t count)
 -static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
 +static void npcm7xx_timer_init(Object *obj)
  {
--    assert(s->in_transaction || !s->callback);
+-    NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev);
-+    assert(s->in_transaction);
+-    SysBusDevice *sbd = &s->parent;
-     s->delta = count;
++    NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
-     if (s->enabled) {
++    DeviceState *dev = DEVICE(obj);
--        if (!s->callback) {
++    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
--            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+     int i;
--            ptimer_reload(s, 0);
+     NPCM7xxWatchdogTimer *w;
--        } else {
--            s->need_reload = true;
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
--        }
+             npcm7xx_watchdog_timer_expired, w);
-+        s->need_reload = true;
+     sysbus_init_irq(sbd, &w->irq);
-     }
 -    memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s,
 +    memory_region_init_io(&s->iomem, obj, &npcm7xx_timer_ops, s,
                            TYPE_NPCM7XX_TIMER, 4 * KiB);
      sysbus_init_mmio(sbd, &s->iomem);
      qdev_init_gpio_out_named(dev, &w->reset_signal,
              NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1);
 +    s->clock = qdev_init_clock_in(dev, "clock", NULL, NULL);
  }
-@@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot)
+ static const VMStateDescription vmstate_npcm7xx_base_timer = {
- {
+@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_watchdog_timer = {
-     bool was_disabled = !s->enabled;
+ static const VMStateDescription vmstate_npcm7xx_timer_ctrl = {
--    assert(s->in_transaction || !s->callback);
+     .name = "npcm7xx-timer-ctrl",
-+    assert(s->in_transaction);
+-    .version_id = 1,
+-    .minimum_version_id = 1,
-     if (was_disabled && s->period == 0) {
++    .version_id = 2,
-         if (!qtest_enabled()) {
++    .minimum_version_id = 2,
-@@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot)
+     .fields = (VMStateField[]) {
-     }
+         VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState),
-     s->enabled = oneshot ? 2 : 1;
++        VMSTATE_CLOCK(clock, NPCM7xxTimerCtrlState),
-     if (was_disabled) {
+         VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState,
--        if (!s->callback) {
+                              NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer,
--            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+                              NPCM7xxTimer),
--            ptimer_reload(s, 0);
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_class_init(ObjectClass *klass, void *data)
--        } else {
+     QEMU_BUILD_BUG_ON(NPCM7XX_TIMER_REGS_END > NPCM7XX_TIMER_NR_REGS);
--            s->need_reload = true;
--        }
+     dc->desc = "NPCM7xx Timer Controller";
-+        s->need_reload = true;
+-    dc->realize = npcm7xx_timer_realize;
-     }
+     dc->vmsd = &vmstate_npcm7xx_timer_ctrl;
- }
+     rc->phases.enter = npcm7xx_timer_enter_reset;
+     rc->phases.hold = npcm7xx_timer_hold_reset;
-@@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot)
+@@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_timer_info = {
-    is immediately restarted.  */
+     .parent             = TYPE_SYS_BUS_DEVICE,
- void ptimer_stop(ptimer_state *s)
+     .instance_size      = sizeof(NPCM7xxTimerCtrlState),
- {
+     .class_init         = npcm7xx_timer_class_init,
--    assert(s->in_transaction || !s->callback);
++    .instance_init      = npcm7xx_timer_init,
 +    assert(s->in_transaction);
      if (!s->enabled)
          return;
@@ -XXX,XX +XXX,XX @@ void ptimer_stop(ptimer_state *s)
      s->delta = ptimer_get_count(s);
      timer_del(s->timer);
      s->enabled = 0;
 -    if (s->callback) {
 -        s->need_reload = false;
 -    }
 +    s->need_reload = false;
  }
  /* Set counter increment interval in nanoseconds.  */
  void ptimer_set_period(ptimer_state *s, int64_t period)
  {
 -    assert(s->in_transaction || !s->callback);
 +    assert(s->in_transaction);
      s->delta = ptimer_get_count(s);
      s->period = period;
      s->period_frac = 0;
      if (s->enabled) {
 -        if (!s->callback) {
 -            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 -            ptimer_reload(s, 0);
 -        } else {
 -            s->need_reload = true;
 -        }
 +        s->need_reload = true;
      }
  }
  /* Set counter frequency in Hz.  */
  void ptimer_set_freq(ptimer_state *s, uint32_t freq)
  {
 -    assert(s->in_transaction || !s->callback);
 +    assert(s->in_transaction);
      s->delta = ptimer_get_count(s);
      s->period = 1000000000ll / freq;
      s->period_frac = (1000000000ll << 32) / freq;
      if (s->enabled) {
 -        if (!s->callback) {
 -            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 -            ptimer_reload(s, 0);
 -        } else {
 -            s->need_reload = true;
 -        }
 +        s->need_reload = true;
      }
  }
@@ -XXX,XX +XXX,XX @@ void ptimer_set_freq(ptimer_state *s, uint32_t freq)
     count = limit.  */
  void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload)
  {
 -    assert(s->in_transaction || !s->callback);
 +    assert(s->in_transaction);
      s->limit = limit;
      if (reload)
          s->delta = limit;
      if (s->enabled && reload) {
 -        if (!s->callback) {
 -            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 -            ptimer_reload(s, 0);
 -        } else {
 -            s->need_reload = true;
 -        }
 +        s->need_reload = true;
      }
  }
@@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_limit(ptimer_state *s)
  void ptimer_transaction_begin(ptimer_state *s)
  {
 -    assert(!s->in_transaction || !s->callback);
 +    assert(!s->in_transaction);
      s->in_transaction = true;
      s->need_reload = false;
  }
@@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_ptimer = {
      }
  };
--ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask)
+ static void npcm7xx_timer_register_type(void)
 -{
 -    ptimer_state *s;
 -
 -    s = (ptimer_state *)g_malloc0(sizeof(ptimer_state));
 -    s->bh = bh;
 -    s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, ptimer_tick, s);
 -    s->policy_mask = policy_mask;
 -
 -    /*
 -     * These two policies are incompatible -- trigger-on-decrement implies
 -     * a timer trigger when the count becomes 0, but no-immediate-trigger
 -     * implies a trigger when the count stops being 0.
 -     */
 -    assert(!((policy_mask & PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT) &&
 -             (policy_mask & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER)));
 -    return s;
 -}
 -
  ptimer_state *ptimer_init(ptimer_cb callback, void *callback_opaque,
                            uint8_t policy_mask)
  {
      ptimer_state *s;
 -    /*
 -     * The callback function is mandatory; so we use it to distinguish
 -     * old-style QEMUBH ptimers from new transaction API ptimers.
 -     * (ptimer_init_with_bh() allows a NULL bh pointer and at least
 -     * one device (digic-timer) passes NULL, so it's not the case
 -     * that either s->bh != NULL or s->callback != NULL.)
 -     */
 +    /* The callback function is mandatory. */
      assert(callback);
      s = g_new0(ptimer_state, 1);
@@ -XXX,XX +XXX,XX @@ ptimer_state *ptimer_init(ptimer_cb callback, void *callback_opaque,
  void ptimer_free(ptimer_state *s)
  {
 -    if (s->bh) {
 -        qemu_bh_delete(s->bh);
 -    }
      timer_free(s->timer);
      g_free(s);
  }
 --
 .20.1

-New patch
+[PULL 17/21] hw/adc: Add an ADC module for NPCM7XX
+From: Hao Wu <wuhaotsh@google.com>
+The ADC is part of NPCM7XX Module. Its behavior is controled by the
+ADC_CON register. It converts one of the eight analog inputs into a
+digital input and stores it in the ADC_DATA register when enabled.
+Users can alter input value by using qom-set QMP command.
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Message-id: 20210108190945.949196-4-wuhaotsh@google.com
+[PMM: Added missing hw/adc/trace.h file]
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ docs/system/arm/nuvoton.rst    |   2 +-
+ meson.build                    |   1 +
+ hw/adc/trace.h                 |   1 +
+ include/hw/adc/npcm7xx_adc.h   |  69 ++++++
+ include/hw/arm/npcm7xx.h       |   2 +
+ hw/adc/npcm7xx_adc.c           | 301 ++++++++++++++++++++++++++
+ hw/arm/npcm7xx.c               |  24 ++-
+ tests/qtest/npcm7xx_adc-test.c | 377 +++++++++++++++++++++++++++++++++
+ hw/adc/meson.build             |   1 +
+ hw/adc/trace-events            |   5 +
+ tests/qtest/meson.build        |   3 +-
+files changed, 783 insertions(+), 3 deletions(-)
+ create mode 100644 hw/adc/trace.h
+ create mode 100644 include/hw/adc/npcm7xx_adc.h
+ create mode 100644 hw/adc/npcm7xx_adc.c
+ create mode 100644 tests/qtest/npcm7xx_adc-test.c
+ create mode 100644 hw/adc/trace-events
+diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
+index XXXXXXX..XXXXXXX 100644
+--- a/docs/system/arm/nuvoton.rst
++++ b/docs/system/arm/nuvoton.rst
+@@ -XXX,XX +XXX,XX @@ Supported devices
+  * Random Number Generator (RNG)
+  * USB host (USBH)
+  * GPIO controller
++ * Analog to Digital Converter (ADC)
+ Missing devices
+ ---------------
+@@ -XXX,XX +XXX,XX @@ Missing devices
+  * USB device (USBD)
+  * SMBus controller (SMBF)
+  * Peripheral SPI controller (PSPI)
+- * Analog to Digital Converter (ADC)
+  * SD/MMC host
+  * PECI interface
+  * Pulse Width Modulation (PWM)
+diff --git a/meson.build b/meson.build
+index XXXXXXX..XXXXXXX 100644
+--- a/meson.build
++++ b/meson.build
+@@ -XXX,XX +XXX,XX @@ if have_system
+     'chardev',
+     'hw/9pfs',
+     'hw/acpi',
++    'hw/adc',
+     'hw/alpha',
+     'hw/arm',
+     'hw/audio',
+diff --git a/hw/adc/trace.h b/hw/adc/trace.h
+new file mode 100644
+index XXXXXXX..XXXXXXX
+--- /dev/null
++++ b/hw/adc/trace.h
+@@ -0,0 +1 @@
++#include "trace/trace-hw_adc.h"
+diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h
+new file mode 100644
+index XXXXXXX..XXXXXXX
+--- /dev/null
++++ b/include/hw/adc/npcm7xx_adc.h
+@@ -XXX,XX +XXX,XX @@
++/*
++ * Nuvoton NPCM7xx ADC Module
++ *
++ * Copyright 2020 Google LLC
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ */
++#ifndef NPCM7XX_ADC_H
++#define NPCM7XX_ADC_H
++
++#include "hw/clock.h"
++#include "hw/irq.h"
++#include "hw/sysbus.h"
++#include "qemu/timer.h"
++
++#define NPCM7XX_ADC_NUM_INPUTS      8
++/**
++ * This value should not be changed unless write_adc_calibration function in
++ * hw/arm/npcm7xx.c is also changed.
++ */
++#define NPCM7XX_ADC_NUM_CALIB       2
++
++/**
++ * struct NPCM7xxADCState - Analog to Digital Converter Module device state.
++ * @parent: System bus device.
++ * @iomem: Memory region through which registers are accessed.
++ * @conv_timer: The timer counts down remaining cycles for the conversion.
++ * @irq: GIC interrupt line to fire on expiration (if enabled).
++ * @con: The Control Register.
++ * @data: The Data Buffer.
++ * @clock: The ADC Clock.
++ * @adci: The input voltage in units of uV. 1uv = 1e-6V.
++ * @vref: The external reference voltage.
++ * @iref: The internal reference voltage, initialized at launch time.
++ * @rv: The calibrated output values of 0.5V and 1.5V for the ADC.
++ */
++typedef struct {
++    SysBusDevice parent;
++
++    MemoryRegion iomem;
++
++    QEMUTimer    conv_timer;
++
++    qemu_irq     irq;
++    uint32_t     con;
++    uint32_t     data;
++    Clock       *clock;
++
++    /* Voltages are in unit of uV. 1V = 1000000uV. */
++    uint32_t     adci[NPCM7XX_ADC_NUM_INPUTS];
++    uint32_t     vref;
++    uint32_t     iref;
++
++    uint16_t     calibration_r_values[NPCM7XX_ADC_NUM_CALIB];
++} NPCM7xxADCState;
++
++#define TYPE_NPCM7XX_ADC "npcm7xx-adc"
++#define NPCM7XX_ADC(obj) \
++    OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC)
++
++#endif /* NPCM7XX_ADC_H */
+diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
+index XXXXXXX..XXXXXXX 100644
+--- a/include/hw/arm/npcm7xx.h
++++ b/include/hw/arm/npcm7xx.h
+@@ -XXX,XX +XXX,XX @@
+ #define NPCM7XX_H
+ #include "hw/boards.h"
++#include "hw/adc/npcm7xx_adc.h"
+ #include "hw/cpu/a9mpcore.h"
+ #include "hw/gpio/npcm7xx_gpio.h"
+ #include "hw/mem/npcm7xx_mc.h"
+@@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState {
+     NPCM7xxGCRState     gcr;
+     NPCM7xxCLKState     clk;
+     NPCM7xxTimerCtrlState tim[3];
++    NPCM7xxADCState     adc;
+     NPCM7xxOTPState     key_storage;
+     NPCM7xxOTPState     fuse_array;
+     NPCM7xxMCState      mc;
+diff --git a/hw/adc/npcm7xx_adc.c b/hw/adc/npcm7xx_adc.c
+new file mode 100644
+index XXXXXXX..XXXXXXX
+--- /dev/null
++++ b/hw/adc/npcm7xx_adc.c
+@@ -XXX,XX +XXX,XX @@
++/*
++ * Nuvoton NPCM7xx ADC Module
++ *
++ * Copyright 2020 Google LLC
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ */
++
++#include "qemu/osdep.h"
++#include "hw/adc/npcm7xx_adc.h"
++#include "hw/qdev-clock.h"
++#include "hw/qdev-properties.h"
++#include "hw/registerfields.h"
++#include "migration/vmstate.h"
++#include "qemu/log.h"
++#include "qemu/module.h"
++#include "qemu/timer.h"
++#include "qemu/units.h"
++#include "trace.h"
++
++REG32(NPCM7XX_ADC_CON, 0x0)
++REG32(NPCM7XX_ADC_DATA, 0x4)
++
++/* Register field definitions. */
++#define NPCM7XX_ADC_CON_MUX(rv) extract32(rv, 24, 4)
++#define NPCM7XX_ADC_CON_INT_EN  BIT(21)
++#define NPCM7XX_ADC_CON_REFSEL  BIT(19)
++#define NPCM7XX_ADC_CON_INT     BIT(18)
++#define NPCM7XX_ADC_CON_EN      BIT(17)
++#define NPCM7XX_ADC_CON_RST     BIT(16)
++#define NPCM7XX_ADC_CON_CONV    BIT(14)
++#define NPCM7XX_ADC_CON_DIV(rv) extract32(rv, 1, 8)
++
++#define NPCM7XX_ADC_MAX_RESULT      1023
++#define NPCM7XX_ADC_DEFAULT_IREF    2000000
++#define NPCM7XX_ADC_CONV_CYCLES     20
++#define NPCM7XX_ADC_RESET_CYCLES    10
++#define NPCM7XX_ADC_R0_INPUT        500000
++#define NPCM7XX_ADC_R1_INPUT        1500000
++
++static void npcm7xx_adc_reset(NPCM7xxADCState *s)
++{
++    timer_del(&s->conv_timer);
++    s->con = 0x000c0001;
++    s->data = 0x00000000;
++}
++
++static uint32_t npcm7xx_adc_convert(uint32_t input, uint32_t ref)
++{
++    uint32_t result;
++
++    result = input * (NPCM7XX_ADC_MAX_RESULT + 1) / ref;
++    if (result > NPCM7XX_ADC_MAX_RESULT) {
++        result = NPCM7XX_ADC_MAX_RESULT;
++    }
++
++    return result;
++}
++
++static uint32_t npcm7xx_adc_prescaler(NPCM7xxADCState *s)
++{
++    return 2 * (NPCM7XX_ADC_CON_DIV(s->con) + 1);
++}
++
++static void npcm7xx_adc_start_timer(Clock *clk, QEMUTimer *timer,
++        uint32_t cycles, uint32_t prescaler)
++{
++    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
++    int64_t ticks = cycles;
++    int64_t ns;
++
++    ticks *= prescaler;
++    ns = clock_ticks_to_ns(clk, ticks);
++    ns += now;
++    timer_mod(timer, ns);
++}
++
++static void npcm7xx_adc_start_convert(NPCM7xxADCState *s)
++{
++    uint32_t prescaler = npcm7xx_adc_prescaler(s);
++
++    npcm7xx_adc_start_timer(s->clock, &s->conv_timer, NPCM7XX_ADC_CONV_CYCLES,
++            prescaler);
++}
++
++static void npcm7xx_adc_convert_done(void *opaque)
++{
++    NPCM7xxADCState *s = opaque;
++    uint32_t input = NPCM7XX_ADC_CON_MUX(s->con);
++    uint32_t ref = (s->con & NPCM7XX_ADC_CON_REFSEL)
++        ? s->iref : s->vref;
++
++    if (input >= NPCM7XX_ADC_NUM_INPUTS) {
++        qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid input: %u\n",
++                      __func__, input);
++        return;
++    }
++    s->data = npcm7xx_adc_convert(s->adci[input], ref);
++    if (s->con & NPCM7XX_ADC_CON_INT_EN) {
++        s->con |= NPCM7XX_ADC_CON_INT;
++        qemu_irq_raise(s->irq);
++    }
++    s->con &= ~NPCM7XX_ADC_CON_CONV;
++}
++
++static void npcm7xx_adc_calibrate(NPCM7xxADCState *adc)
++{
++    adc->calibration_r_values[0] = npcm7xx_adc_convert(NPCM7XX_ADC_R0_INPUT,
++            adc->iref);
++    adc->calibration_r_values[1] = npcm7xx_adc_convert(NPCM7XX_ADC_R1_INPUT,
++            adc->iref);
++}
++
++static void npcm7xx_adc_write_con(NPCM7xxADCState *s, uint32_t new_con)
++{
++    uint32_t old_con = s->con;
++
++    /* Write ADC_INT to 1 to clear it */
++    if (new_con & NPCM7XX_ADC_CON_INT) {
++        new_con &= ~NPCM7XX_ADC_CON_INT;
++        qemu_irq_lower(s->irq);
++    } else if (old_con & NPCM7XX_ADC_CON_INT) {
++        new_con |= NPCM7XX_ADC_CON_INT;
++    }
++
++    s->con = new_con;
++
++    if (s->con & NPCM7XX_ADC_CON_RST) {
++        npcm7xx_adc_reset(s);
++        return;
++    }
++
++    if ((s->con & NPCM7XX_ADC_CON_EN)) {
++        if (s->con & NPCM7XX_ADC_CON_CONV) {
++            if (!(old_con & NPCM7XX_ADC_CON_CONV)) {
++                npcm7xx_adc_start_convert(s);
++            }
++        } else {
++            timer_del(&s->conv_timer);
++        }
++    }
++}
++
++static uint64_t npcm7xx_adc_read(void *opaque, hwaddr offset, unsigned size)
++{
++    uint64_t value = 0;
++    NPCM7xxADCState *s = opaque;
++
++    switch (offset) {
++    case A_NPCM7XX_ADC_CON:
++        value = s->con;
++        break;
++
++    case A_NPCM7XX_ADC_DATA:
++        value = s->data;
++        break;
++
++    default:
++        qemu_log_mask(LOG_GUEST_ERROR,
++                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
++                      __func__, offset);
++        break;
++    }
++
++    trace_npcm7xx_adc_read(DEVICE(s)->canonical_path, offset, value);
++    return value;
++}
++
++static void npcm7xx_adc_write(void *opaque, hwaddr offset, uint64_t v,
++        unsigned size)
++{
++    NPCM7xxADCState *s = opaque;
++
++    trace_npcm7xx_adc_write(DEVICE(s)->canonical_path, offset, v);
++    switch (offset) {
++    case A_NPCM7XX_ADC_CON:
++        npcm7xx_adc_write_con(s, v);
++        break;
++
++    case A_NPCM7XX_ADC_DATA:
++        qemu_log_mask(LOG_GUEST_ERROR,
++                      "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
++                      __func__, offset);
++        break;
++
++    default:
++        qemu_log_mask(LOG_GUEST_ERROR,
++                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
++                      __func__, offset);
++        break;
++    }
++
++}
++
++static const struct MemoryRegionOps npcm7xx_adc_ops = {
++    .read       = npcm7xx_adc_read,
++    .write      = npcm7xx_adc_write,
++    .endianness = DEVICE_LITTLE_ENDIAN,
++    .valid      = {
++        .min_access_size        = 4,
++        .max_access_size        = 4,
++        .unaligned              = false,
++    },
++};
++
++static void npcm7xx_adc_enter_reset(Object *obj, ResetType type)
++{
++    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
++
++    npcm7xx_adc_reset(s);
++}
++
++static void npcm7xx_adc_hold_reset(Object *obj)
++{
++    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
++
++    qemu_irq_lower(s->irq);
++}
++
++static void npcm7xx_adc_init(Object *obj)
++{
++    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
++    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
++    int i;
++
++    sysbus_init_irq(sbd, &s->irq);
++
++    timer_init_ns(&s->conv_timer, QEMU_CLOCK_VIRTUAL,
++            npcm7xx_adc_convert_done, s);
++    memory_region_init_io(&s->iomem, obj, &npcm7xx_adc_ops, s,
++                          TYPE_NPCM7XX_ADC, 4 * KiB);
++    sysbus_init_mmio(sbd, &s->iomem);
++    s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL);
++
++    for (i = 0; i < NPCM7XX_ADC_NUM_INPUTS; ++i) {
++        object_property_add_uint32_ptr(obj, "adci[*]",
++                &s->adci[i], OBJ_PROP_FLAG_WRITE);
++    }
++    object_property_add_uint32_ptr(obj, "vref",
++            &s->vref, OBJ_PROP_FLAG_WRITE);
++    npcm7xx_adc_calibrate(s);
++}
++
++static const VMStateDescription vmstate_npcm7xx_adc = {
++    .name = "npcm7xx-adc",
++    .version_id = 0,
++    .minimum_version_id = 0,
++    .fields = (VMStateField[]) {
++        VMSTATE_TIMER(conv_timer, NPCM7xxADCState),
++        VMSTATE_UINT32(con, NPCM7xxADCState),
++        VMSTATE_UINT32(data, NPCM7xxADCState),
++        VMSTATE_CLOCK(clock, NPCM7xxADCState),
++        VMSTATE_UINT32_ARRAY(adci, NPCM7xxADCState, NPCM7XX_ADC_NUM_INPUTS),
++        VMSTATE_UINT32(vref, NPCM7xxADCState),
++        VMSTATE_UINT32(iref, NPCM7xxADCState),
++        VMSTATE_UINT16_ARRAY(calibration_r_values, NPCM7xxADCState,
++                NPCM7XX_ADC_NUM_CALIB),
++        VMSTATE_END_OF_LIST(),
++    },
++};
++
++static Property npcm7xx_timer_properties[] = {
++    DEFINE_PROP_UINT32("iref", NPCM7xxADCState, iref, NPCM7XX_ADC_DEFAULT_IREF),
++    DEFINE_PROP_END_OF_LIST(),
++};
++
++static void npcm7xx_adc_class_init(ObjectClass *klass, void *data)
++{
++    ResettableClass *rc = RESETTABLE_CLASS(klass);
++    DeviceClass *dc = DEVICE_CLASS(klass);
++
++    dc->desc = "NPCM7xx ADC Module";
++    dc->vmsd = &vmstate_npcm7xx_adc;
++    rc->phases.enter = npcm7xx_adc_enter_reset;
++    rc->phases.hold = npcm7xx_adc_hold_reset;
++
++    device_class_set_props(dc, npcm7xx_timer_properties);
++}
++
++static const TypeInfo npcm7xx_adc_info = {
++    .name               = TYPE_NPCM7XX_ADC,
++    .parent             = TYPE_SYS_BUS_DEVICE,
++    .instance_size      = sizeof(NPCM7xxADCState),
++    .class_init         = npcm7xx_adc_class_init,
++    .instance_init      = npcm7xx_adc_init,
++};
++
++static void npcm7xx_adc_register_types(void)
++{
++    type_register_static(&npcm7xx_adc_info);
++}
++
++type_init(npcm7xx_adc_register_types);
+diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/arm/npcm7xx.c
++++ b/hw/arm/npcm7xx.c
+@@ -XXX,XX +XXX,XX @@
+ #define NPCM7XX_EHCI_BA         (0xf0806000)
+ #define NPCM7XX_OHCI_BA         (0xf0807000)
++/* ADC Module */
++#define NPCM7XX_ADC_BA          (0xf000c000)
++
+ /* Internal AHB SRAM */
+ #define NPCM7XX_RAM3_BA         (0xc0008000)
+ #define NPCM7XX_RAM3_SZ         (4 * KiB)
+@@ -XXX,XX +XXX,XX @@
+ #define NPCM7XX_ROM_BA          (0xffff0000)
+ #define NPCM7XX_ROM_SZ          (64 * KiB)
++
+ /* Clock configuration values to be fixed up when bypassing bootloader */
+ /* Run PLL1 at 1600 MHz */
+@@ -XXX,XX +XXX,XX @@
+  * interrupts.
+  */
+ enum NPCM7xxInterrupt {
++    NPCM7XX_ADC_IRQ             = 0,
+     NPCM7XX_UART0_IRQ           = 2,
+     NPCM7XX_UART1_IRQ,
+     NPCM7XX_UART2_IRQ,
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init_fuses(NPCM7xxState *s)
+                             sizeof(value));
+ }
++static void npcm7xx_write_adc_calibration(NPCM7xxState *s)
++{
++    /* Both ADC and the fuse array must have realized. */
++    QEMU_BUILD_BUG_ON(sizeof(s->adc.calibration_r_values) != 4);
++    npcm7xx_otp_array_write(&s->fuse_array, s->adc.calibration_r_values,
++            NPCM7XX_FUSE_ADC_CALIB, sizeof(s->adc.calibration_r_values));
++}
++
+ static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n)
+ {
+     return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n);
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj)
+                             TYPE_NPCM7XX_FUSE_ARRAY);
+     object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC);
+     object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG);
++    object_initialize_child(obj, "adc", &s->adc, TYPE_NPCM7XX_ADC);
+     for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
+         object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER);
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
+     sysbus_realize(SYS_BUS_DEVICE(&s->mc), &error_abort);
+     sysbus_mmio_map(SYS_BUS_DEVICE(&s->mc), 0, NPCM7XX_MC_BA);
++    /* ADC Modules. Cannot fail. */
++    qdev_connect_clock_in(DEVICE(&s->adc), "clock", qdev_get_clock_out(
++                          DEVICE(&s->clk), "adc-clock"));
++    sysbus_realize(SYS_BUS_DEVICE(&s->adc), &error_abort);
++    sysbus_mmio_map(SYS_BUS_DEVICE(&s->adc), 0, NPCM7XX_ADC_BA);
++    sysbus_connect_irq(SYS_BUS_DEVICE(&s->adc), 0,
++            npcm7xx_irq(s, NPCM7XX_ADC_IRQ));
++    npcm7xx_write_adc_calibration(s);
++
+     /* Timer Modules (TIM). Cannot fail. */
+     QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
+     for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
+     create_unimplemented_device("npcm7xx.vdmx",         0xe0800000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.pcierc",       0xe1000000,  64 * KiB);
+     create_unimplemented_device("npcm7xx.kcs",          0xf0007000,   4 * KiB);
+-    create_unimplemented_device("npcm7xx.adc",          0xf000c000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.gfxi",         0xf000e000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.gpio[0]",      0xf0010000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.gpio[1]",      0xf0011000,   4 * KiB);
+diff --git a/tests/qtest/npcm7xx_adc-test.c b/tests/qtest/npcm7xx_adc-test.c
+new file mode 100644
+index XXXXXXX..XXXXXXX
+--- /dev/null
++++ b/tests/qtest/npcm7xx_adc-test.c
+@@ -XXX,XX +XXX,XX @@
++/*
++ * QTests for Nuvoton NPCM7xx ADCModules.
++ *
++ * Copyright 2020 Google LLC
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ */
++
++#include "qemu/osdep.h"
++#include "qemu/bitops.h"
++#include "qemu/timer.h"
++#include "libqos/libqtest.h"
++#include "qapi/qmp/qdict.h"
++
++#define REF_HZ          (25000000)
++
++#define CON_OFFSET      0x0
++#define DATA_OFFSET     0x4
++
++#define NUM_INPUTS      8
++#define DEFAULT_IREF    2000000
++#define CONV_CYCLES     20
++#define RESET_CYCLES    10
++#define R0_INPUT        500000
++#define R1_INPUT        1500000
++#define MAX_RESULT      1023
++
++#define DEFAULT_CLKDIV  5
++
++#define FUSE_ARRAY_BA   0xf018a000
++#define FCTL_OFFSET     0x14
++#define FST_OFFSET      0x0
++#define FADDR_OFFSET    0x4
++#define FDATA_OFFSET    0x8
++#define ADC_CALIB_ADDR  24
++#define FUSE_READ       0x2
++
++/* Register field definitions. */
++#define CON_MUX(rv) ((rv) << 24)
++#define CON_INT_EN  BIT(21)
++#define CON_REFSEL  BIT(19)
++#define CON_INT     BIT(18)
++#define CON_EN      BIT(17)
++#define CON_RST     BIT(16)
++#define CON_CONV    BIT(14)
++#define CON_DIV(rv) extract32(rv, 1, 8)
++
++#define FST_RDST    BIT(1)
++#define FDATA_MASK  0xff
++
++#define MAX_ERROR   10000
++#define MIN_CALIB_INPUT 100000
++#define MAX_CALIB_INPUT 1800000
++
++static const uint32_t input_list[] = {
++    100000,
++    500000,
++    1000000,
++    1500000,
++    1800000,
++    2000000,
++};
++
++static const uint32_t vref_list[] = {
++    2000000,
++    2200000,
++    2500000,
++};
++
++static const uint32_t iref_list[] = {
++    1800000,
++    1900000,
++    2000000,
++    2100000,
++    2200000,
++};
++
++static const uint32_t div_list[] = {0, 1, 3, 7, 15};
++
++typedef struct ADC {
++    int irq;
++    uint64_t base_addr;
++} ADC;
++
++ADC adc = {
++    .irq        = 0,
++    .base_addr  = 0xf000c000
++};
++
++static uint32_t adc_read_con(QTestState *qts, const ADC *adc)
++{
++    return qtest_readl(qts, adc->base_addr + CON_OFFSET);
++}
++
++static void adc_write_con(QTestState *qts, const ADC *adc, uint32_t value)
++{
++    qtest_writel(qts, adc->base_addr + CON_OFFSET, value);
++}
++
++static uint32_t adc_read_data(QTestState *qts, const ADC *adc)
++{
++    return qtest_readl(qts, adc->base_addr + DATA_OFFSET);
++}
++
++static uint32_t adc_calibrate(uint32_t measured, uint32_t *rv)
++{
++    return R0_INPUT + (R1_INPUT - R0_INPUT) * (int32_t)(measured - rv[0])
++        / (int32_t)(rv[1] - rv[0]);
++}
++
++static void adc_qom_set(QTestState *qts, const ADC *adc,
++        const char *name, uint32_t value)
++{
++    QDict *response;
++    const char *path = "/machine/soc/adc";
++
++    g_test_message("Setting properties %s of %s with value %u",
++            name, path, value);
++    response = qtest_qmp(qts, "{ 'execute': 'qom-set',"
++            " 'arguments': { 'path': %s, 'property': %s, 'value': %u}}",
++            path, name, value);
++    /* The qom set message returns successfully. */
++    g_assert_true(qdict_haskey(response, "return"));
++}
++
++static void adc_write_input(QTestState *qts, const ADC *adc,
++        uint32_t index, uint32_t value)
++{
++    char name[100];
++
++    sprintf(name, "adci[%u]", index);
++    adc_qom_set(qts, adc, name, value);
++}
++
++static void adc_write_vref(QTestState *qts, const ADC *adc, uint32_t value)
++{
++    adc_qom_set(qts, adc, "vref", value);
++}
++
++static uint32_t adc_calculate_output(uint32_t input, uint32_t ref)
++{
++    uint32_t output;
++
++    g_assert_cmpuint(input, <=, ref);
++    output = (input * (MAX_RESULT + 1)) / ref;
++    if (output > MAX_RESULT) {
++        output = MAX_RESULT;
++    }
++
++    return output;
++}
++
++static uint32_t adc_prescaler(QTestState *qts, const ADC *adc)
++{
++    uint32_t div = extract32(adc_read_con(qts, adc), 1, 8);
++
++    return 2 * (div + 1);
++}
++
++static int64_t adc_calculate_steps(uint32_t cycles, uint32_t prescale,
++        uint32_t clkdiv)
++{
++    return (NANOSECONDS_PER_SECOND / (REF_HZ >> clkdiv)) * cycles * prescale;
++}
++
++static void adc_wait_conv_finished(QTestState *qts, const ADC *adc,
++        uint32_t clkdiv)
++{
++    uint32_t prescaler = adc_prescaler(qts, adc);
++
++    /*
++     * ADC should takes roughly 20 cycles to convert one sample. So we assert it
++     * should take 10~30 cycles here.
++     */
++    qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES / 2, prescaler,
++                clkdiv));
++    /* ADC is still converting. */
++    g_assert_true(adc_read_con(qts, adc) & CON_CONV);
++    qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES, prescaler, clkdiv));
++    /* ADC has finished conversion. */
++    g_assert_false(adc_read_con(qts, adc) & CON_CONV);
++}
++
++/* Check ADC can be reset to default value. */
++static void test_init(gconstpointer adc_p)
++{
++    const ADC *adc = adc_p;
++
++    QTestState *qts = qtest_init("-machine quanta-gsj");
++    adc_write_con(qts, adc, CON_REFSEL | CON_INT);
++    g_assert_cmphex(adc_read_con(qts, adc), ==, CON_REFSEL);
++    qtest_quit(qts);
++}
++
++/* Check ADC can convert from an internal reference. */
++static void test_convert_internal(gconstpointer adc_p)
++{
++    const ADC *adc = adc_p;
++    uint32_t index, input, output, expected_output;
++    QTestState *qts = qtest_init("-machine quanta-gsj");
++    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
++
++    for (index = 0; index < NUM_INPUTS; ++index) {
++        for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) {
++            input = input_list[i];
++            expected_output = adc_calculate_output(input, DEFAULT_IREF);
++
++            adc_write_input(qts, adc, index, input);
++            adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT |
++                    CON_EN | CON_CONV);
++            adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
++            g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) |
++                    CON_REFSEL | CON_EN);
++            g_assert_false(qtest_get_irq(qts, adc->irq));
++            output = adc_read_data(qts, adc);
++            g_assert_cmpuint(output, ==, expected_output);
++        }
++    }
++
++    qtest_quit(qts);
++}
++
++/* Check ADC can convert from an external reference. */
++static void test_convert_external(gconstpointer adc_p)
++{
++    const ADC *adc = adc_p;
++    uint32_t index, input, vref, output, expected_output;
++    QTestState *qts = qtest_init("-machine quanta-gsj");
++    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
++
++    for (index = 0; index < NUM_INPUTS; ++index) {
++        for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) {
++            for (size_t j = 0; j < ARRAY_SIZE(vref_list); ++j) {
++                input = input_list[i];
++                vref = vref_list[j];
++                expected_output = adc_calculate_output(input, vref);
++
++                adc_write_input(qts, adc, index, input);
++                adc_write_vref(qts, adc, vref);
++                adc_write_con(qts, adc, CON_MUX(index) | CON_INT | CON_EN |
++                        CON_CONV);
++                adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
++                g_assert_cmphex(adc_read_con(qts, adc), ==,
++                        CON_MUX(index) | CON_EN);
++                g_assert_false(qtest_get_irq(qts, adc->irq));
++                output = adc_read_data(qts, adc);
++                g_assert_cmpuint(output, ==, expected_output);
++            }
++        }
++    }
++
++    qtest_quit(qts);
++}
++
++/* Check ADC interrupt files if and only if CON_INT_EN is set. */
++static void test_interrupt(gconstpointer adc_p)
++{
++    const ADC *adc = adc_p;
++    uint32_t index, input, output, expected_output;
++    QTestState *qts = qtest_init("-machine quanta-gsj");
++
++    index = 1;
++    input = input_list[1];
++    expected_output = adc_calculate_output(input, DEFAULT_IREF);
++
++    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
++    adc_write_input(qts, adc, index, input);
++    g_assert_false(qtest_get_irq(qts, adc->irq));
++    adc_write_con(qts, adc, CON_MUX(index) | CON_INT_EN | CON_REFSEL | CON_INT
++            | CON_EN | CON_CONV);
++    adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
++    g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) | CON_INT_EN
++            | CON_REFSEL | CON_INT | CON_EN);
++    g_assert_true(qtest_get_irq(qts, adc->irq));
++    output = adc_read_data(qts, adc);
++    g_assert_cmpuint(output, ==, expected_output);
++
++    qtest_quit(qts);
++}
++
++/* Check ADC is reset after setting ADC_RST for 10 ADC cycles. */
++static void test_reset(gconstpointer adc_p)
++{
++    const ADC *adc = adc_p;
++    QTestState *qts = qtest_init("-machine quanta-gsj");
++
++    for (size_t i = 0; i < ARRAY_SIZE(div_list); ++i) {
++        uint32_t div = div_list[i];
++
++        adc_write_con(qts, adc, CON_INT | CON_EN | CON_RST | CON_DIV(div));
++        qtest_clock_step(qts, adc_calculate_steps(RESET_CYCLES,
++                    adc_prescaler(qts, adc), DEFAULT_CLKDIV));
++        g_assert_false(adc_read_con(qts, adc) & CON_EN);
++    }
++    qtest_quit(qts);
++}
++
++/* Check ADC Calibration works as desired. */
++static void test_calibrate(gconstpointer adc_p)
++{
++    int i, j;
++    const ADC *adc = adc_p;
++
++    for (j = 0; j < ARRAY_SIZE(iref_list); ++j) {
++        uint32_t iref = iref_list[j];
++        uint32_t expected_rv[] = {
++            adc_calculate_output(R0_INPUT, iref),
++            adc_calculate_output(R1_INPUT, iref),
++        };
++        char buf[100];
++        QTestState *qts;
++
++        sprintf(buf, "-machine quanta-gsj -global npcm7xx-adc.iref=%u", iref);
++        qts = qtest_init(buf);
++
++        /* Check the converted value is correct using the calibration value. */
++        for (i = 0; i < ARRAY_SIZE(input_list); ++i) {
++            uint32_t input;
++            uint32_t output;
++            uint32_t expected_output;
++            uint32_t calibrated_voltage;
++            uint32_t index = 0;
++
++            input = input_list[i];
++            /* Calibration only works for input range 0.1V ~ 1.8V. */
++            if (input < MIN_CALIB_INPUT || input > MAX_CALIB_INPUT) {
++                continue;
++            }
++            expected_output = adc_calculate_output(input, iref);
++
++            adc_write_input(qts, adc, index, input);
++            adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT |
++                    CON_EN | CON_CONV);
++            adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
++            g_assert_cmphex(adc_read_con(qts, adc), ==,
++                    CON_REFSEL | CON_MUX(index) | CON_EN);
++            output = adc_read_data(qts, adc);
++            g_assert_cmpuint(output, ==, expected_output);
++
++            calibrated_voltage = adc_calibrate(output, expected_rv);
++            g_assert_cmpuint(calibrated_voltage, >, input - MAX_ERROR);
++            g_assert_cmpuint(calibrated_voltage, <, input + MAX_ERROR);
++        }
++
++        qtest_quit(qts);
++    }
++}
++
++static void adc_add_test(const char *name, const ADC* wd,
++        GTestDataFunc fn)
++{
++    g_autofree char *full_name = g_strdup_printf("npcm7xx_adc/%s",  name);
++    qtest_add_data_func(full_name, wd, fn);
++}
++#define add_test(name, td) adc_add_test(#name, td, test_##name)
++
++int main(int argc, char **argv)
++{
++    g_test_init(&argc, &argv, NULL);
++
++    add_test(init, &adc);
++    add_test(convert_internal, &adc);
++    add_test(convert_external, &adc);
++    add_test(interrupt, &adc);
++    add_test(reset, &adc);
++    add_test(calibrate, &adc);
++
++    return g_test_run();
++}
+diff --git a/hw/adc/meson.build b/hw/adc/meson.build
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/adc/meson.build
++++ b/hw/adc/meson.build
+@@ -1 +1,2 @@
+ softmmu_ss.add(when: 'CONFIG_STM32F2XX_ADC', if_true: files('stm32f2xx_adc.c'))
++softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_adc.c'))
+diff --git a/hw/adc/trace-events b/hw/adc/trace-events
+new file mode 100644
+index XXXXXXX..XXXXXXX
+--- /dev/null
++++ b/hw/adc/trace-events
+@@ -XXX,XX +XXX,XX @@
++# See docs/devel/tracing.txt for syntax documentation.
++
++# npcm7xx_adc.c
++npcm7xx_adc_read(const char *id, uint64_t offset, uint32_t value) " %s offset: 0x%04" PRIx64 " value 0x%04" PRIx32
++npcm7xx_adc_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value 0x%04" PRIx32
+diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
+index XXXXXXX..XXXXXXX 100644
+--- a/tests/qtest/meson.build
++++ b/tests/qtest/meson.build
+@@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \
+   ['prom-env-test', 'boot-serial-test']
+ qtests_npcm7xx = \
+-  ['npcm7xx_gpio-test',
++  ['npcm7xx_adc-test',
++   'npcm7xx_gpio-test',
+    'npcm7xx_rng-test',
+    'npcm7xx_timer-test',
+    'npcm7xx_watchdog_timer-test']
+--
+.20.1

-New patch
+[PULL 18/21] hw/misc: Add a PWM module for NPCM7XX
+From: Hao Wu <wuhaotsh@google.com>
+The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
+identical PWM modules. Each module contains 4 PWM entries. Each PWM has
+two outputs: frequency and duty_cycle. Both are computed using inputs
+from software side.
+This module does not model detail pulse signals since it is expensive.
+It also does not model interrupts and watchdogs that are dependant on
+the detail models. The interfaces for these are left in the module so
+that anyone in need for these functionalities can implement on their
+own.
+The user can read the duty cycle and frequency using qom-get command.
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Message-id: 20210108190945.949196-5-wuhaotsh@google.com
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ docs/system/arm/nuvoton.rst   |   2 +-
+ include/hw/arm/npcm7xx.h      |   2 +
+ include/hw/misc/npcm7xx_pwm.h | 105 +++++++
+ hw/arm/npcm7xx.c              |  26 +-
+ hw/misc/npcm7xx_pwm.c         | 550 ++++++++++++++++++++++++++++++++++
+ hw/misc/meson.build           |   1 +
+ hw/misc/trace-events          |   6 +
+files changed, 689 insertions(+), 3 deletions(-)
+ create mode 100644 include/hw/misc/npcm7xx_pwm.h
+ create mode 100644 hw/misc/npcm7xx_pwm.c
+diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
+index XXXXXXX..XXXXXXX 100644
+--- a/docs/system/arm/nuvoton.rst
++++ b/docs/system/arm/nuvoton.rst
+@@ -XXX,XX +XXX,XX @@ Supported devices
+  * USB host (USBH)
+  * GPIO controller
+  * Analog to Digital Converter (ADC)
++ * Pulse Width Modulation (PWM)
+ Missing devices
+ ---------------
+@@ -XXX,XX +XXX,XX @@ Missing devices
+  * Peripheral SPI controller (PSPI)
+  * SD/MMC host
+  * PECI interface
+- * Pulse Width Modulation (PWM)
+  * Tachometer
+  * PCI and PCIe root complex and bridges
+  * VDM and MCTP support
+diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
+index XXXXXXX..XXXXXXX 100644
+--- a/include/hw/arm/npcm7xx.h
++++ b/include/hw/arm/npcm7xx.h
+@@ -XXX,XX +XXX,XX @@
+ #include "hw/mem/npcm7xx_mc.h"
+ #include "hw/misc/npcm7xx_clk.h"
+ #include "hw/misc/npcm7xx_gcr.h"
++#include "hw/misc/npcm7xx_pwm.h"
+ #include "hw/misc/npcm7xx_rng.h"
+ #include "hw/nvram/npcm7xx_otp.h"
+ #include "hw/timer/npcm7xx_timer.h"
+@@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState {
+     NPCM7xxCLKState     clk;
+     NPCM7xxTimerCtrlState tim[3];
+     NPCM7xxADCState     adc;
++    NPCM7xxPWMState     pwm[2];
+     NPCM7xxOTPState     key_storage;
+     NPCM7xxOTPState     fuse_array;
+     NPCM7xxMCState      mc;
+diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h
+new file mode 100644
+index XXXXXXX..XXXXXXX
+--- /dev/null
++++ b/include/hw/misc/npcm7xx_pwm.h
+@@ -XXX,XX +XXX,XX @@
++/*
++ * Nuvoton NPCM7xx PWM Module
++ *
++ * Copyright 2020 Google LLC
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ */
++#ifndef NPCM7XX_PWM_H
++#define NPCM7XX_PWM_H
++
++#include "hw/clock.h"
++#include "hw/sysbus.h"
++#include "hw/irq.h"
++
++/* Each PWM module holds 4 PWM channels. */
++#define NPCM7XX_PWM_PER_MODULE 4
++
++/*
++ * Number of registers in one pwm module. Don't change this without increasing
++ * the version_id in vmstate.
++ */
++#define NPCM7XX_PWM_NR_REGS (0x54 / sizeof(uint32_t))
++
++/*
++ * The maximum duty values. Each duty unit represents 1/NPCM7XX_PWM_MAX_DUTY
++ * cycles. For example, if NPCM7XX_PWM_MAX_DUTY=1,000,000 and a PWM has a duty
++ * value of 100,000 the duty cycle for that PWM is 10%.
++ */
++#define NPCM7XX_PWM_MAX_DUTY 1000000
++
++typedef struct NPCM7xxPWMState NPCM7xxPWMState;
++
++/**
++ * struct NPCM7xxPWM - The state of a single PWM channel.
++ * @module: The PWM module that contains this channel.
++ * @irq: GIC interrupt line to fire on expiration if enabled.
++ * @running: Whether this PWM channel is generating output.
++ * @inverted: Whether this PWM channel is inverted.
++ * @index: The index of this PWM channel.
++ * @cnr: The counter register.
++ * @cmr: The comparator register.
++ * @pdr: The data register.
++ * @pwdr: The watchdog register.
++ * @freq: The frequency of this PWM channel.
++ * @duty: The duty cycle of this PWM channel. One unit represents
++ *   1/NPCM7XX_MAX_DUTY cycles.
++ */
++typedef struct NPCM7xxPWM {
++    NPCM7xxPWMState         *module;
++
++    qemu_irq                irq;
++
++    bool                    running;
++    bool                    inverted;
++
++    uint8_t                 index;
++    uint32_t                cnr;
++    uint32_t                cmr;
++    uint32_t                pdr;
++    uint32_t                pwdr;
++
++    uint32_t                freq;
++    uint32_t                duty;
++} NPCM7xxPWM;
++
++/**
++ * struct NPCM7xxPWMState - Pulse Width Modulation device state.
++ * @parent: System bus device.
++ * @iomem: Memory region through which registers are accessed.
++ * @clock: The PWM clock.
++ * @pwm: The PWM channels owned by this module.
++ * @ppr: The prescaler register.
++ * @csr: The clock selector register.
++ * @pcr: The control register.
++ * @pier: The interrupt enable register.
++ * @piir: The interrupt indication register.
++ */
++struct NPCM7xxPWMState {
++    SysBusDevice parent;
++
++    MemoryRegion iomem;
++
++    Clock       *clock;
++    NPCM7xxPWM pwm[NPCM7XX_PWM_PER_MODULE];
++
++    uint32_t    ppr;
++    uint32_t    csr;
++    uint32_t    pcr;
++    uint32_t    pier;
++    uint32_t    piir;
++};
++
++#define TYPE_NPCM7XX_PWM "npcm7xx-pwm"
++#define NPCM7XX_PWM(obj) \
++    OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM)
++
++#endif /* NPCM7XX_PWM_H */
+diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/arm/npcm7xx.c
++++ b/hw/arm/npcm7xx.c
+@@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt {
+     NPCM7XX_WDG2_IRQ,                   /* Timer Module 2 Watchdog */
+     NPCM7XX_EHCI_IRQ            = 61,
+     NPCM7XX_OHCI_IRQ            = 62,
++    NPCM7XX_PWM0_IRQ            = 93,   /* PWM module 0 */
++    NPCM7XX_PWM1_IRQ,                   /* PWM module 1 */
+     NPCM7XX_GPIO0_IRQ           = 116,
+     NPCM7XX_GPIO1_IRQ,
+     NPCM7XX_GPIO2_IRQ,
+@@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_fiu3_flash_addr[] = {
+xb8000000, /* CS3 */
+ };
++/* Register base address for each PWM Module */
++static const hwaddr npcm7xx_pwm_addr[] = {
++    0xf0103000,
++    0xf0104000,
++};
++
+ static const struct {
+     hwaddr regs_addr;
+     uint32_t unconnected_pins;
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj)
+         object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i],
+                                 TYPE_NPCM7XX_FIU);
+     }
++
++    for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
++        object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM);
++    }
+ }
+ static void npcm7xx_realize(DeviceState *dev, Error **errp)
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
+     sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci), 0,
+                        npcm7xx_irq(s, NPCM7XX_OHCI_IRQ));
++    /* PWM Modules. Cannot fail. */
++    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pwm_addr) != ARRAY_SIZE(s->pwm));
++    for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
++        SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pwm[i]);
++
++        qdev_connect_clock_in(DEVICE(&s->pwm[i]), "clock", qdev_get_clock_out(
++                    DEVICE(&s->clk), "apb3-clock"));
++        sysbus_realize(sbd, &error_abort);
++        sysbus_mmio_map(sbd, 0, npcm7xx_pwm_addr[i]);
++        sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i));
++    }
++
+     /*
+      * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects
+      * specified, but this is a programming error.
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
+     create_unimplemented_device("npcm7xx.peci",         0xf0100000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.siox[1]",      0xf0101000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.siox[2]",      0xf0102000,   4 * KiB);
+-    create_unimplemented_device("npcm7xx.pwm[0]",       0xf0103000,   4 * KiB);
+-    create_unimplemented_device("npcm7xx.pwm[1]",       0xf0104000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.mft[0]",       0xf0180000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.mft[1]",       0xf0181000,   4 * KiB);
+     create_unimplemented_device("npcm7xx.mft[2]",       0xf0182000,   4 * KiB);
+diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c
+new file mode 100644
+index XXXXXXX..XXXXXXX
+--- /dev/null
++++ b/hw/misc/npcm7xx_pwm.c
+@@ -XXX,XX +XXX,XX @@
++/*
++ * Nuvoton NPCM7xx PWM Module
++ *
++ * Copyright 2020 Google LLC
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ */
++
++#include "qemu/osdep.h"
++#include "hw/irq.h"
++#include "hw/qdev-clock.h"
++#include "hw/qdev-properties.h"
++#include "hw/misc/npcm7xx_pwm.h"
++#include "hw/registerfields.h"
++#include "migration/vmstate.h"
++#include "qemu/bitops.h"
++#include "qemu/error-report.h"
++#include "qemu/log.h"
++#include "qemu/module.h"
++#include "qemu/units.h"
++#include "trace.h"
++
++REG32(NPCM7XX_PWM_PPR, 0x00);
++REG32(NPCM7XX_PWM_CSR, 0x04);
++REG32(NPCM7XX_PWM_PCR, 0x08);
++REG32(NPCM7XX_PWM_CNR0, 0x0c);
++REG32(NPCM7XX_PWM_CMR0, 0x10);
++REG32(NPCM7XX_PWM_PDR0, 0x14);
++REG32(NPCM7XX_PWM_CNR1, 0x18);
++REG32(NPCM7XX_PWM_CMR1, 0x1c);
++REG32(NPCM7XX_PWM_PDR1, 0x20);
++REG32(NPCM7XX_PWM_CNR2, 0x24);
++REG32(NPCM7XX_PWM_CMR2, 0x28);
++REG32(NPCM7XX_PWM_PDR2, 0x2c);
++REG32(NPCM7XX_PWM_CNR3, 0x30);
++REG32(NPCM7XX_PWM_CMR3, 0x34);
++REG32(NPCM7XX_PWM_PDR3, 0x38);
++REG32(NPCM7XX_PWM_PIER, 0x3c);
++REG32(NPCM7XX_PWM_PIIR, 0x40);
++REG32(NPCM7XX_PWM_PWDR0, 0x44);
++REG32(NPCM7XX_PWM_PWDR1, 0x48);
++REG32(NPCM7XX_PWM_PWDR2, 0x4c);
++REG32(NPCM7XX_PWM_PWDR3, 0x50);
++
++/* Register field definitions. */
++#define NPCM7XX_PPR(rv, index)      extract32((rv), npcm7xx_ppr_base[index], 8)
++#define NPCM7XX_CSR(rv, index)      extract32((rv), npcm7xx_csr_base[index], 3)
++#define NPCM7XX_CH(rv, index)       extract32((rv), npcm7xx_ch_base[index], 4)
++#define NPCM7XX_CH_EN               BIT(0)
++#define NPCM7XX_CH_INV              BIT(2)
++#define NPCM7XX_CH_MOD              BIT(3)
++
++/* Offset of each PWM channel's prescaler in the PPR register. */
++static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 };
++/* Offset of each PWM channel's clock selector in the CSR register. */
++static const int npcm7xx_csr_base[] = { 0, 4, 8, 12 };
++/* Offset of each PWM channel's control variable in the PCR register. */
++static const int npcm7xx_ch_base[] = { 0, 8, 12, 16 };
++
++static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p)
++{
++    uint32_t ppr;
++    uint32_t csr;
++    uint32_t freq;
++
++    if (!p->running) {
++        return 0;
++    }
++
++    csr = NPCM7XX_CSR(p->module->csr, p->index);
++    ppr = NPCM7XX_PPR(p->module->ppr, p->index);
++    freq = clock_get_hz(p->module->clock);
++    freq /= ppr + 1;
++    /* csr can only be 0~4 */
++    if (csr > 4) {
++        qemu_log_mask(LOG_GUEST_ERROR,
++                      "%s: invalid csr value %u\n",
++                      __func__, csr);
++        csr = 4;
++    }
++    /* freq won't be changed if csr == 4. */
++    if (csr < 4) {
++        freq >>= csr + 1;
++    }
++
++    return freq / (p->cnr + 1);
++}
++
++static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p)
++{
++    uint64_t duty;
++
++    if (p->running) {
++        if (p->cnr == 0) {
++            duty = 0;
++        } else if (p->cmr >= p->cnr) {
++            duty = NPCM7XX_PWM_MAX_DUTY;
++        } else {
++            duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1);
++        }
++    } else {
++        duty = 0;
++    }
++
++    if (p->inverted) {
++        duty = NPCM7XX_PWM_MAX_DUTY - duty;
++    }
++
++    return duty;
++}
++
++static void npcm7xx_pwm_update_freq(NPCM7xxPWM *p)
++{
++    uint32_t freq = npcm7xx_pwm_calculate_freq(p);
++
++    if (freq != p->freq) {
++        trace_npcm7xx_pwm_update_freq(DEVICE(p->module)->canonical_path,
++                                      p->index, p->freq, freq);
++        p->freq = freq;
++    }
++}
++
++static void npcm7xx_pwm_update_duty(NPCM7xxPWM *p)
++{
++    uint32_t duty = npcm7xx_pwm_calculate_duty(p);
++
++    if (duty != p->duty) {
++        trace_npcm7xx_pwm_update_duty(DEVICE(p->module)->canonical_path,
++                                      p->index, p->duty, duty);
++        p->duty = duty;
++    }
++}
++
++static void npcm7xx_pwm_update_output(NPCM7xxPWM *p)
++{
++    npcm7xx_pwm_update_freq(p);
++    npcm7xx_pwm_update_duty(p);
++}
++
++static void npcm7xx_pwm_write_ppr(NPCM7xxPWMState *s, uint32_t new_ppr)
++{
++    int i;
++    uint32_t old_ppr = s->ppr;
++
++    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ppr_base) != NPCM7XX_PWM_PER_MODULE);
++    s->ppr = new_ppr;
++    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
++        if (NPCM7XX_PPR(old_ppr, i) != NPCM7XX_PPR(new_ppr, i)) {
++            npcm7xx_pwm_update_freq(&s->pwm[i]);
++        }
++    }
++}
++
++static void npcm7xx_pwm_write_csr(NPCM7xxPWMState *s, uint32_t new_csr)
++{
++    int i;
++    uint32_t old_csr = s->csr;
++
++    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_csr_base) != NPCM7XX_PWM_PER_MODULE);
++    s->csr = new_csr;
++    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
++        if (NPCM7XX_CSR(old_csr, i) != NPCM7XX_CSR(new_csr, i)) {
++            npcm7xx_pwm_update_freq(&s->pwm[i]);
++        }
++    }
++}
++
++static void npcm7xx_pwm_write_pcr(NPCM7xxPWMState *s, uint32_t new_pcr)
++{
++    int i;
++    bool inverted;
++    uint32_t pcr;
++    NPCM7xxPWM *p;
++
++    s->pcr = new_pcr;
++    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ch_base) != NPCM7XX_PWM_PER_MODULE);
++    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
++        p = &s->pwm[i];
++        pcr = NPCM7XX_CH(new_pcr, i);
++        inverted = pcr & NPCM7XX_CH_INV;
++
++        /*
++         * We only run a PWM channel with toggle mode. Single-shot mode does not
++         * generate frequency and duty-cycle values.
++         */
++        if ((pcr & NPCM7XX_CH_EN) && (pcr & NPCM7XX_CH_MOD)) {
++            if (p->running) {
++                /* Re-run this PWM channel if inverted changed. */
++                if (p->inverted ^ inverted) {
++                    p->inverted = inverted;
++                    npcm7xx_pwm_update_duty(p);
++                }
++            } else {
++                /* Run this PWM channel. */
++                p->running = true;
++                p->inverted = inverted;
++                npcm7xx_pwm_update_output(p);
++            }
++        } else {
++            /* Clear this PWM channel. */
++            p->running = false;
++            p->inverted = inverted;
++            npcm7xx_pwm_update_output(p);
++        }
++    }
++
++}
++
++static hwaddr npcm7xx_cnr_index(hwaddr offset)
++{
++    switch (offset) {
++    case A_NPCM7XX_PWM_CNR0:
++        return 0;
++    case A_NPCM7XX_PWM_CNR1:
++        return 1;
++    case A_NPCM7XX_PWM_CNR2:
++        return 2;
++    case A_NPCM7XX_PWM_CNR3:
++        return 3;
++    default:
++        g_assert_not_reached();
++    }
++}
++
++static hwaddr npcm7xx_cmr_index(hwaddr offset)
++{
++    switch (offset) {
++    case A_NPCM7XX_PWM_CMR0:
++        return 0;
++    case A_NPCM7XX_PWM_CMR1:
++        return 1;
++    case A_NPCM7XX_PWM_CMR2:
++        return 2;
++    case A_NPCM7XX_PWM_CMR3:
++        return 3;
++    default:
++        g_assert_not_reached();
++    }
++}
++
++static hwaddr npcm7xx_pdr_index(hwaddr offset)
++{
++    switch (offset) {
++    case A_NPCM7XX_PWM_PDR0:
++        return 0;
++    case A_NPCM7XX_PWM_PDR1:
++        return 1;
++    case A_NPCM7XX_PWM_PDR2:
++        return 2;
++    case A_NPCM7XX_PWM_PDR3:
++        return 3;
++    default:
++        g_assert_not_reached();
++    }
++}
++
++static hwaddr npcm7xx_pwdr_index(hwaddr offset)
++{
++    switch (offset) {
++    case A_NPCM7XX_PWM_PWDR0:
++        return 0;
++    case A_NPCM7XX_PWM_PWDR1:
++        return 1;
++    case A_NPCM7XX_PWM_PWDR2:
++        return 2;
++    case A_NPCM7XX_PWM_PWDR3:
++        return 3;
++    default:
++        g_assert_not_reached();
++    }
++}
++
++static uint64_t npcm7xx_pwm_read(void *opaque, hwaddr offset, unsigned size)
++{
++    NPCM7xxPWMState *s = opaque;
++    uint64_t value = 0;
++
++    switch (offset) {
++    case A_NPCM7XX_PWM_CNR0:
++    case A_NPCM7XX_PWM_CNR1:
++    case A_NPCM7XX_PWM_CNR2:
++    case A_NPCM7XX_PWM_CNR3:
++        value = s->pwm[npcm7xx_cnr_index(offset)].cnr;
++        break;
++
++    case A_NPCM7XX_PWM_CMR0:
++    case A_NPCM7XX_PWM_CMR1:
++    case A_NPCM7XX_PWM_CMR2:
++    case A_NPCM7XX_PWM_CMR3:
++        value = s->pwm[npcm7xx_cmr_index(offset)].cmr;
++        break;
++
++    case A_NPCM7XX_PWM_PDR0:
++    case A_NPCM7XX_PWM_PDR1:
++    case A_NPCM7XX_PWM_PDR2:
++    case A_NPCM7XX_PWM_PDR3:
++        value = s->pwm[npcm7xx_pdr_index(offset)].pdr;
++        break;
++
++    case A_NPCM7XX_PWM_PWDR0:
++    case A_NPCM7XX_PWM_PWDR1:
++    case A_NPCM7XX_PWM_PWDR2:
++    case A_NPCM7XX_PWM_PWDR3:
++        value = s->pwm[npcm7xx_pwdr_index(offset)].pwdr;
++        break;
++
++    case A_NPCM7XX_PWM_PPR:
++        value = s->ppr;
++        break;
++
++    case A_NPCM7XX_PWM_CSR:
++        value = s->csr;
++        break;
++
++    case A_NPCM7XX_PWM_PCR:
++        value = s->pcr;
++        break;
++
++    case A_NPCM7XX_PWM_PIER:
++        value = s->pier;
++        break;
++
++    case A_NPCM7XX_PWM_PIIR:
++        value = s->piir;
++        break;
++
++    default:
++        qemu_log_mask(LOG_GUEST_ERROR,
++                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
++                      __func__, offset);
++        break;
++    }
++
++    trace_npcm7xx_pwm_read(DEVICE(s)->canonical_path, offset, value);
++    return value;
++}
++
++static void npcm7xx_pwm_write(void *opaque, hwaddr offset,
++                                uint64_t v, unsigned size)
++{
++    NPCM7xxPWMState *s = opaque;
++    NPCM7xxPWM *p;
++    uint32_t value = v;
++
++    trace_npcm7xx_pwm_write(DEVICE(s)->canonical_path, offset, value);
++    switch (offset) {
++    case A_NPCM7XX_PWM_CNR0:
++    case A_NPCM7XX_PWM_CNR1:
++    case A_NPCM7XX_PWM_CNR2:
++    case A_NPCM7XX_PWM_CNR3:
++        p = &s->pwm[npcm7xx_cnr_index(offset)];
++        p->cnr = value;
++        npcm7xx_pwm_update_output(p);
++        break;
++
++    case A_NPCM7XX_PWM_CMR0:
++    case A_NPCM7XX_PWM_CMR1:
++    case A_NPCM7XX_PWM_CMR2:
++    case A_NPCM7XX_PWM_CMR3:
++        p = &s->pwm[npcm7xx_cmr_index(offset)];
++        p->cmr = value;
++        npcm7xx_pwm_update_output(p);
++        break;
++
++    case A_NPCM7XX_PWM_PDR0:
++    case A_NPCM7XX_PWM_PDR1:
++    case A_NPCM7XX_PWM_PDR2:
++    case A_NPCM7XX_PWM_PDR3:
++        qemu_log_mask(LOG_GUEST_ERROR,
++                      "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
++                      __func__, offset);
++        break;
++
++    case A_NPCM7XX_PWM_PWDR0:
++    case A_NPCM7XX_PWM_PWDR1:
++    case A_NPCM7XX_PWM_PWDR2:
++    case A_NPCM7XX_PWM_PWDR3:
++        qemu_log_mask(LOG_UNIMP,
++                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
++                     __func__, offset);
++        break;
++
++    case A_NPCM7XX_PWM_PPR:
++        npcm7xx_pwm_write_ppr(s, value);
++        break;
++
++    case A_NPCM7XX_PWM_CSR:
++        npcm7xx_pwm_write_csr(s, value);
++        break;
++
++    case A_NPCM7XX_PWM_PCR:
++        npcm7xx_pwm_write_pcr(s, value);
++        break;
++
++    case A_NPCM7XX_PWM_PIER:
++        qemu_log_mask(LOG_UNIMP,
++                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
++                     __func__, offset);
++        break;
++
++    case A_NPCM7XX_PWM_PIIR:
++        qemu_log_mask(LOG_UNIMP,
++                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
++                     __func__, offset);
++        break;
++
++    default:
++        qemu_log_mask(LOG_GUEST_ERROR,
++                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
++                      __func__, offset);
++        break;
++    }
++}
++
++static const struct MemoryRegionOps npcm7xx_pwm_ops = {
++    .read       = npcm7xx_pwm_read,
++    .write      = npcm7xx_pwm_write,
++    .endianness = DEVICE_LITTLE_ENDIAN,
++    .valid      = {
++        .min_access_size        = 4,
++        .max_access_size        = 4,
++        .unaligned              = false,
++    },
++};
++
++static void npcm7xx_pwm_enter_reset(Object *obj, ResetType type)
++{
++    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
++    int i;
++
++    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
++        NPCM7xxPWM *p = &s->pwm[i];
++
++        p->cnr = 0x00000000;
++        p->cmr = 0x00000000;
++        p->pdr = 0x00000000;
++        p->pwdr = 0x00000000;
++    }
++
++    s->ppr = 0x00000000;
++    s->csr = 0x00000000;
++    s->pcr = 0x00000000;
++    s->pier = 0x00000000;
++    s->piir = 0x00000000;
++}
++
++static void npcm7xx_pwm_hold_reset(Object *obj)
++{
++    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
++    int i;
++
++    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
++        qemu_irq_lower(s->pwm[i].irq);
++    }
++}
++
++static void npcm7xx_pwm_init(Object *obj)
++{
++    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
++    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
++    int i;
++
++    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
++        NPCM7xxPWM *p = &s->pwm[i];
++        p->module = s;
++        p->index = i;
++        sysbus_init_irq(sbd, &p->irq);
++    }
++
++    memory_region_init_io(&s->iomem, obj, &npcm7xx_pwm_ops, s,
++                          TYPE_NPCM7XX_PWM, 4 * KiB);
++    sysbus_init_mmio(sbd, &s->iomem);
++    s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL);
++
++    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
++        object_property_add_uint32_ptr(obj, "freq[*]",
++                &s->pwm[i].freq, OBJ_PROP_FLAG_READ);
++        object_property_add_uint32_ptr(obj, "duty[*]",
++                &s->pwm[i].duty, OBJ_PROP_FLAG_READ);
++    }
++}
++
++static const VMStateDescription vmstate_npcm7xx_pwm = {
++    .name = "npcm7xx-pwm",
++    .version_id = 0,
++    .minimum_version_id = 0,
++    .fields = (VMStateField[]) {
++        VMSTATE_BOOL(running, NPCM7xxPWM),
++        VMSTATE_BOOL(inverted, NPCM7xxPWM),
++        VMSTATE_UINT8(index, NPCM7xxPWM),
++        VMSTATE_UINT32(cnr, NPCM7xxPWM),
++        VMSTATE_UINT32(cmr, NPCM7xxPWM),
++        VMSTATE_UINT32(pdr, NPCM7xxPWM),
++        VMSTATE_UINT32(pwdr, NPCM7xxPWM),
++        VMSTATE_UINT32(freq, NPCM7xxPWM),
++        VMSTATE_UINT32(duty, NPCM7xxPWM),
++        VMSTATE_END_OF_LIST(),
++    },
++};
++
++static const VMStateDescription vmstate_npcm7xx_pwm_module = {
++    .name = "npcm7xx-pwm-module",
++    .version_id = 0,
++    .minimum_version_id = 0,
++    .fields = (VMStateField[]) {
++        VMSTATE_CLOCK(clock, NPCM7xxPWMState),
++        VMSTATE_STRUCT_ARRAY(pwm, NPCM7xxPWMState,
++                             NPCM7XX_PWM_PER_MODULE, 0, vmstate_npcm7xx_pwm,
++                             NPCM7xxPWM),
++        VMSTATE_UINT32(ppr, NPCM7xxPWMState),
++        VMSTATE_UINT32(csr, NPCM7xxPWMState),
++        VMSTATE_UINT32(pcr, NPCM7xxPWMState),
++        VMSTATE_UINT32(pier, NPCM7xxPWMState),
++        VMSTATE_UINT32(piir, NPCM7xxPWMState),
++        VMSTATE_END_OF_LIST(),
++    },
++};
++
++static void npcm7xx_pwm_class_init(ObjectClass *klass, void *data)
++{
++    ResettableClass *rc = RESETTABLE_CLASS(klass);
++    DeviceClass *dc = DEVICE_CLASS(klass);
++
++    dc->desc = "NPCM7xx PWM Controller";
++    dc->vmsd = &vmstate_npcm7xx_pwm_module;
++    rc->phases.enter = npcm7xx_pwm_enter_reset;
++    rc->phases.hold = npcm7xx_pwm_hold_reset;
++}
++
++static const TypeInfo npcm7xx_pwm_info = {
++    .name               = TYPE_NPCM7XX_PWM,
++    .parent             = TYPE_SYS_BUS_DEVICE,
++    .instance_size      = sizeof(NPCM7xxPWMState),
++    .class_init         = npcm7xx_pwm_class_init,
++    .instance_init      = npcm7xx_pwm_init,
++};
++
++static void npcm7xx_pwm_register_type(void)
++{
++    type_register_static(&npcm7xx_pwm_info);
++}
++type_init(npcm7xx_pwm_register_type);
+diff --git a/hw/misc/meson.build b/hw/misc/meson.build
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/misc/meson.build
++++ b/hw/misc/meson.build
+@@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c'))
+ softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files(
+   'npcm7xx_clk.c',
+   'npcm7xx_gcr.c',
++  'npcm7xx_pwm.c',
+   'npcm7xx_rng.c',
+ ))
+ softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files(
+diff --git a/hw/misc/trace-events b/hw/misc/trace-events
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/misc/trace-events
++++ b/hw/misc/trace-events
+@@ -XXX,XX +XXX,XX @@ npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " valu
+ npcm7xx_rng_read(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u"
+ npcm7xx_rng_write(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u"
++# npcm7xx_pwm.c
++npcm7xx_pwm_read(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
++npcm7xx_pwm_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
++npcm7xx_pwm_update_freq(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Freq: old_freq: %u, new_freq: %u"
++npcm7xx_pwm_update_duty(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Duty: old_duty: %u, new_duty: %u"
++
+ # stm32f4xx_syscfg.c
+ stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d"
+ stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d"
+--
+.20.1

-New patch
+[PULL 19/21] hw/misc: Add QTest for NPCM7XX PWM Module
+From: Hao Wu <wuhaotsh@google.com>
+We add a qtest for the PWM in the previous patch. It proves it works as
+expected.
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Message-id: 20210108190945.949196-6-wuhaotsh@google.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ tests/qtest/npcm7xx_pwm-test.c | 490 +++++++++++++++++++++++++++++++++
+ tests/qtest/meson.build        |   1 +
+files changed, 491 insertions(+)
+ create mode 100644 tests/qtest/npcm7xx_pwm-test.c
+diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c
+new file mode 100644
+index XXXXXXX..XXXXXXX
+--- /dev/null
++++ b/tests/qtest/npcm7xx_pwm-test.c
+@@ -XXX,XX +XXX,XX @@
++/*
++ * QTests for Nuvoton NPCM7xx PWM Modules.
++ *
++ * Copyright 2020 Google LLC
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ */
++
++#include "qemu/osdep.h"
++#include "qemu/bitops.h"
++#include "libqos/libqtest.h"
++#include "qapi/qmp/qdict.h"
++#include "qapi/qmp/qnum.h"
++
++#define REF_HZ          25000000
++
++/* Register field definitions. */
++#define CH_EN           BIT(0)
++#define CH_INV          BIT(2)
++#define CH_MOD          BIT(3)
++
++/* Registers shared between all PWMs in a module */
++#define PPR             0x00
++#define CSR             0x04
++#define PCR             0x08
++#define PIER            0x3c
++#define PIIR            0x40
++
++/* CLK module related */
++#define CLK_BA          0xf0801000
++#define CLKSEL          0x04
++#define CLKDIV1         0x08
++#define CLKDIV2         0x2c
++#define PLLCON0         0x0c
++#define PLLCON1         0x10
++#define PLL_INDV(rv)    extract32((rv), 0, 6)
++#define PLL_FBDV(rv)    extract32((rv), 16, 12)
++#define PLL_OTDV1(rv)   extract32((rv), 8, 3)
++#define PLL_OTDV2(rv)   extract32((rv), 13, 3)
++#define APB3CKDIV(rv)   extract32((rv), 28, 2)
++#define CLK2CKDIV(rv)   extract32((rv), 0, 1)
++#define CLK4CKDIV(rv)   extract32((rv), 26, 2)
++#define CPUCKSEL(rv)    extract32((rv), 0, 2)
++
++#define MAX_DUTY        1000000
++
++typedef struct PWMModule {
++    int irq;
++    uint64_t base_addr;
++} PWMModule;
++
++typedef struct PWM {
++    uint32_t cnr_offset;
++    uint32_t cmr_offset;
++    uint32_t pdr_offset;
++    uint32_t pwdr_offset;
++} PWM;
++
++typedef struct TestData {
++    const PWMModule *module;
++    const PWM *pwm;
++} TestData;
++
++static const PWMModule pwm_module_list[] = {
++    {
++        .irq        = 93,
++        .base_addr  = 0xf0103000
++    },
++    {
++        .irq        = 94,
++        .base_addr  = 0xf0104000
++    }
++};
++
++static const PWM pwm_list[] = {
++    {
++        .cnr_offset     = 0x0c,
++        .cmr_offset     = 0x10,
++        .pdr_offset     = 0x14,
++        .pwdr_offset    = 0x44,
++    },
++    {
++        .cnr_offset     = 0x18,
++        .cmr_offset     = 0x1c,
++        .pdr_offset     = 0x20,
++        .pwdr_offset    = 0x48,
++    },
++    {
++        .cnr_offset     = 0x24,
++        .cmr_offset     = 0x28,
++        .pdr_offset     = 0x2c,
++        .pwdr_offset    = 0x4c,
++    },
++    {
++        .cnr_offset     = 0x30,
++        .cmr_offset     = 0x34,
++        .pdr_offset     = 0x38,
++        .pwdr_offset    = 0x50,
++    },
++};
++
++static const int ppr_base[] = { 0, 0, 8, 8 };
++static const int csr_base[] = { 0, 4, 8, 12 };
++static const int pcr_base[] = { 0, 8, 12, 16 };
++
++static const uint32_t ppr_list[] = {
++    0,
++    1,
++    10,
++    100,
++    255, /* Max possible value. */
++};
++
++static const uint32_t csr_list[] = {
++    0,
++    1,
++    2,
++    3,
++    4, /* Max possible value. */
++};
++
++static const uint32_t cnr_list[] = {
++    0,
++    1,
++    50,
++    100,
++    150,
++    200,
++    1000,
++    10000,
++    65535, /* Max possible value. */
++};
++
++static const uint32_t cmr_list[] = {
++    0,
++    1,
++    10,
++    50,
++    100,
++    150,
++    200,
++    1000,
++    10000,
++    65535, /* Max possible value. */
++};
++
++/* Returns the index of the PWM module. */
++static int pwm_module_index(const PWMModule *module)
++{
++    ptrdiff_t diff = module - pwm_module_list;
++
++    g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_module_list));
++
++    return diff;
++}
++
++/* Returns the index of the PWM entry. */
++static int pwm_index(const PWM *pwm)
++{
++    ptrdiff_t diff = pwm - pwm_list;
++
++    g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_list));
++
++    return diff;
++}
++
++static uint64_t pwm_qom_get(QTestState *qts, const char *path, const char *name)
++{
++    QDict *response;
++
++    g_test_message("Getting properties %s from %s", name, path);
++    response = qtest_qmp(qts, "{ 'execute': 'qom-get',"
++            " 'arguments': { 'path': %s, 'property': %s}}",
++            path, name);
++    /* The qom set message returns successfully. */
++    g_assert_true(qdict_haskey(response, "return"));
++    return qnum_get_uint(qobject_to(QNum, qdict_get(response, "return")));
++}
++
++static uint64_t pwm_get_freq(QTestState *qts, int module_index, int pwm_index)
++{
++    char path[100];
++    char name[100];
++
++    sprintf(path, "/machine/soc/pwm[%d]", module_index);
++    sprintf(name, "freq[%d]", pwm_index);
++
++    return pwm_qom_get(qts, path, name);
++}
++
++static uint64_t pwm_get_duty(QTestState *qts, int module_index, int pwm_index)
++{
++    char path[100];
++    char name[100];
++
++    sprintf(path, "/machine/soc/pwm[%d]", module_index);
++    sprintf(name, "duty[%d]", pwm_index);
++
++    return pwm_qom_get(qts, path, name);
++}
++
++static uint32_t get_pll(uint32_t con)
++{
++    return REF_HZ * PLL_FBDV(con) / (PLL_INDV(con) * PLL_OTDV1(con)
++            * PLL_OTDV2(con));
++}
++
++static uint64_t read_pclk(QTestState *qts)
++{
++    uint64_t freq = REF_HZ;
++    uint32_t clksel = qtest_readl(qts, CLK_BA + CLKSEL);
++    uint32_t pllcon;
++    uint32_t clkdiv1 = qtest_readl(qts, CLK_BA + CLKDIV1);
++    uint32_t clkdiv2 = qtest_readl(qts, CLK_BA + CLKDIV2);
++
++    switch (CPUCKSEL(clksel)) {
++    case 0:
++        pllcon = qtest_readl(qts, CLK_BA + PLLCON0);
++        freq = get_pll(pllcon);
++        break;
++    case 1:
++        pllcon = qtest_readl(qts, CLK_BA + PLLCON1);
++        freq = get_pll(pllcon);
++        break;
++    case 2:
++        break;
++    case 3:
++        break;
++    default:
++        g_assert_not_reached();
++    }
++
++    freq >>= (CLK2CKDIV(clkdiv1) + CLK4CKDIV(clkdiv1) + APB3CKDIV(clkdiv2));
++
++    return freq;
++}
++
++static uint32_t pwm_selector(uint32_t csr)
++{
++    switch (csr) {
++    case 0:
++        return 2;
++    case 1:
++        return 4;
++    case 2:
++        return 8;
++    case 3:
++        return 16;
++    case 4:
++        return 1;
++    default:
++        g_assert_not_reached();
++    }
++}
++
++static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr,
++        uint32_t cnr)
++{
++    return read_pclk(qts) / ((ppr + 1) * pwm_selector(csr) * (cnr + 1));
++}
++
++static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted)
++{
++    uint64_t duty;
++
++    if (cnr == 0) {
++        /* PWM is stopped. */
++        duty = 0;
++    } else if (cmr >= cnr) {
++        duty = MAX_DUTY;
++    } else {
++        duty = MAX_DUTY * (cmr + 1) / (cnr + 1);
++    }
++
++    if (inverted) {
++        duty = MAX_DUTY - duty;
++    }
++
++    return duty;
++}
++
++static uint32_t pwm_read(QTestState *qts, const TestData *td, unsigned offset)
++{
++    return qtest_readl(qts, td->module->base_addr + offset);
++}
++
++static void pwm_write(QTestState *qts, const TestData *td, unsigned offset,
++        uint32_t value)
++{
++    qtest_writel(qts, td->module->base_addr + offset, value);
++}
++
++static uint32_t pwm_read_ppr(QTestState *qts, const TestData *td)
++{
++    return extract32(pwm_read(qts, td, PPR), ppr_base[pwm_index(td->pwm)], 8);
++}
++
++static void pwm_write_ppr(QTestState *qts, const TestData *td, uint32_t value)
++{
++    pwm_write(qts, td, PPR, value << ppr_base[pwm_index(td->pwm)]);
++}
++
++static uint32_t pwm_read_csr(QTestState *qts, const TestData *td)
++{
++    return extract32(pwm_read(qts, td, CSR), csr_base[pwm_index(td->pwm)], 3);
++}
++
++static void pwm_write_csr(QTestState *qts, const TestData *td, uint32_t value)
++{
++    pwm_write(qts, td, CSR, value << csr_base[pwm_index(td->pwm)]);
++}
++
++static uint32_t pwm_read_pcr(QTestState *qts, const TestData *td)
++{
++    return extract32(pwm_read(qts, td, PCR), pcr_base[pwm_index(td->pwm)], 4);
++}
++
++static void pwm_write_pcr(QTestState *qts, const TestData *td, uint32_t value)
++{
++    pwm_write(qts, td, PCR, value << pcr_base[pwm_index(td->pwm)]);
++}
++
++static uint32_t pwm_read_cnr(QTestState *qts, const TestData *td)
++{
++    return pwm_read(qts, td, td->pwm->cnr_offset);
++}
++
++static void pwm_write_cnr(QTestState *qts, const TestData *td, uint32_t value)
++{
++    pwm_write(qts, td, td->pwm->cnr_offset, value);
++}
++
++static uint32_t pwm_read_cmr(QTestState *qts, const TestData *td)
++{
++    return pwm_read(qts, td, td->pwm->cmr_offset);
++}
++
++static void pwm_write_cmr(QTestState *qts, const TestData *td, uint32_t value)
++{
++    pwm_write(qts, td, td->pwm->cmr_offset, value);
++}
++
++/* Check pwm registers can be reset to default value */
++static void test_init(gconstpointer test_data)
++{
++    const TestData *td = test_data;
++    QTestState *qts = qtest_init("-machine quanta-gsj");
++    int module = pwm_module_index(td->module);
++    int pwm = pwm_index(td->pwm);
++
++    g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0);
++    g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0);
++
++    qtest_quit(qts);
++}
++
++/* One-shot mode should not change frequency and duty cycle. */
++static void test_oneshot(gconstpointer test_data)
++{
++    const TestData *td = test_data;
++    QTestState *qts = qtest_init("-machine quanta-gsj");
++    int module = pwm_module_index(td->module);
++    int pwm = pwm_index(td->pwm);
++    uint32_t ppr, csr, pcr;
++    int i, j;
++
++    pcr = CH_EN;
++    for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) {
++        ppr = ppr_list[i];
++        pwm_write_ppr(qts, td, ppr);
++
++        for (j = 0; j < ARRAY_SIZE(csr_list); ++j) {
++            csr = csr_list[j];
++            pwm_write_csr(qts, td, csr);
++            pwm_write_pcr(qts, td, pcr);
++
++            g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr);
++            g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr);
++            g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr);
++            g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0);
++            g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0);
++        }
++    }
++
++    qtest_quit(qts);
++}
++
++/* In toggle mode, the PWM generates correct outputs. */
++static void test_toggle(gconstpointer test_data)
++{
++    const TestData *td = test_data;
++    QTestState *qts = qtest_init("-machine quanta-gsj");
++    int module = pwm_module_index(td->module);
++    int pwm = pwm_index(td->pwm);
++    uint32_t ppr, csr, pcr, cnr, cmr;
++    int i, j, k, l;
++    uint64_t expected_freq, expected_duty;
++
++    pcr = CH_EN | CH_MOD;
++    for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) {
++        ppr = ppr_list[i];
++        pwm_write_ppr(qts, td, ppr);
++
++        for (j = 0; j < ARRAY_SIZE(csr_list); ++j) {
++            csr = csr_list[j];
++            pwm_write_csr(qts, td, csr);
++
++            for (k = 0; k < ARRAY_SIZE(cnr_list); ++k) {
++                cnr = cnr_list[k];
++                pwm_write_cnr(qts, td, cnr);
++
++                for (l = 0; l < ARRAY_SIZE(cmr_list); ++l) {
++                    cmr = cmr_list[l];
++                    pwm_write_cmr(qts, td, cmr);
++                    expected_freq = pwm_compute_freq(qts, ppr, csr, cnr);
++                    expected_duty = pwm_compute_duty(cnr, cmr, false);
++
++                    pwm_write_pcr(qts, td, pcr);
++                    g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr);
++                    g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr);
++                    g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr);
++                    g_assert_cmpuint(pwm_read_cnr(qts, td), ==, cnr);
++                    g_assert_cmpuint(pwm_read_cmr(qts, td), ==, cmr);
++                    g_assert_cmpuint(pwm_get_duty(qts, module, pwm),
++                            ==, expected_duty);
++                    if (expected_duty != 0 && expected_duty != 100) {
++                        /* Duty cycle with 0 or 100 doesn't need frequency. */
++                        g_assert_cmpuint(pwm_get_freq(qts, module, pwm),
++                                ==, expected_freq);
++                    }
++
++                    /* Test inverted mode */
++                    expected_duty = pwm_compute_duty(cnr, cmr, true);
++                    pwm_write_pcr(qts, td, pcr | CH_INV);
++                    g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr | CH_INV);
++                    g_assert_cmpuint(pwm_get_duty(qts, module, pwm),
++                            ==, expected_duty);
++                    if (expected_duty != 0 && expected_duty != 100) {
++                        /* Duty cycle with 0 or 100 doesn't need frequency. */
++                        g_assert_cmpuint(pwm_get_freq(qts, module, pwm),
++                                ==, expected_freq);
++                    }
++
++                }
++            }
++        }
++    }
++
++    qtest_quit(qts);
++}
++
++static void pwm_add_test(const char *name, const TestData* td,
++        GTestDataFunc fn)
++{
++    g_autofree char *full_name = g_strdup_printf(
++            "npcm7xx_pwm/module[%d]/pwm[%d]/%s", pwm_module_index(td->module),
++            pwm_index(td->pwm), name);
++    qtest_add_data_func(full_name, td, fn);
++}
++#define add_test(name, td) pwm_add_test(#name, td, test_##name)
++
++int main(int argc, char **argv)
++{
++    TestData test_data_list[ARRAY_SIZE(pwm_module_list) * ARRAY_SIZE(pwm_list)];
++
++    g_test_init(&argc, &argv, NULL);
++
++    for (int i = 0; i < ARRAY_SIZE(pwm_module_list); ++i) {
++        for (int j = 0; j < ARRAY_SIZE(pwm_list); ++j) {
++            TestData *td = &test_data_list[i * ARRAY_SIZE(pwm_list) + j];
++
++            td->module = &pwm_module_list[i];
++            td->pwm = &pwm_list[j];
++
++            add_test(init, td);
++            add_test(oneshot, td);
++            add_test(toggle, td);
++        }
++    }
++
++    return g_test_run();
++}
+diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
+index XXXXXXX..XXXXXXX 100644
+--- a/tests/qtest/meson.build
++++ b/tests/qtest/meson.build
+@@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \
+ qtests_npcm7xx = \
+   ['npcm7xx_adc-test',
+    'npcm7xx_gpio-test',
++   'npcm7xx_pwm-test',
+    'npcm7xx_rng-test',
+    'npcm7xx_timer-test',
+    'npcm7xx_watchdog_timer-test']
+--
+.20.1

-New patch
+[PULL 20/21] hw/*: Use type casting for SysBusDevice in NPCM7XX
+From: Hao Wu <wuhaotsh@google.com>
+A device shouldn't access its parent object which is QOM internal.
+Instead it should use type cast for this purporse. This patch fixes this
+issue for all NPCM7XX Devices.
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Message-id: 20210108190945.949196-7-wuhaotsh@google.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ hw/arm/npcm7xx_boards.c | 2 +-
+ hw/mem/npcm7xx_mc.c     | 2 +-
+ hw/misc/npcm7xx_clk.c   | 2 +-
+ hw/misc/npcm7xx_gcr.c   | 2 +-
+ hw/misc/npcm7xx_rng.c   | 2 +-
+ hw/nvram/npcm7xx_otp.c  | 2 +-
+ hw/ssi/npcm7xx_fiu.c    | 2 +-
+files changed, 7 insertions(+), 7 deletions(-)
+diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/arm/npcm7xx_boards.c
++++ b/hw/arm/npcm7xx_boards.c
+@@ -XXX,XX +XXX,XX @@ static NPCM7xxState *npcm7xx_create_soc(MachineState *machine,
+                                         uint32_t hw_straps)
+ {
+     NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_GET_CLASS(machine);
+-    MachineClass *mc = &nmc->parent;
++    MachineClass *mc = MACHINE_CLASS(nmc);
+     Object *obj;
+     if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
+diff --git a/hw/mem/npcm7xx_mc.c b/hw/mem/npcm7xx_mc.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/mem/npcm7xx_mc.c
++++ b/hw/mem/npcm7xx_mc.c
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_mc_realize(DeviceState *dev, Error **errp)
+     memory_region_init_io(&s->mmio, OBJECT(s), &npcm7xx_mc_ops, s, "regs",
+                           NPCM7XX_MC_REGS_SIZE);
+-    sysbus_init_mmio(&s->parent, &s->mmio);
++    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->mmio);
+ }
+ static void npcm7xx_mc_class_init(ObjectClass *klass, void *data)
+diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/misc/npcm7xx_clk.c
++++ b/hw/misc/npcm7xx_clk.c
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj)
+     memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
+                           TYPE_NPCM7XX_CLK, 4 * KiB);
+-    sysbus_init_mmio(&s->parent, &s->iomem);
++    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+ }
+ static int npcm7xx_clk_post_load(void *opaque, int version_id)
+diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/misc/npcm7xx_gcr.c
++++ b/hw/misc/npcm7xx_gcr.c
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_init(Object *obj)
+     memory_region_init_io(&s->iomem, obj, &npcm7xx_gcr_ops, s,
+                           TYPE_NPCM7XX_GCR, 4 * KiB);
+-    sysbus_init_mmio(&s->parent, &s->iomem);
++    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+ }
+ static const VMStateDescription vmstate_npcm7xx_gcr = {
+diff --git a/hw/misc/npcm7xx_rng.c b/hw/misc/npcm7xx_rng.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/misc/npcm7xx_rng.c
++++ b/hw/misc/npcm7xx_rng.c
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_rng_init(Object *obj)
+     memory_region_init_io(&s->iomem, obj, &npcm7xx_rng_ops, s, "regs",
+                           NPCM7XX_RNG_REGS_SIZE);
+-    sysbus_init_mmio(&s->parent, &s->iomem);
++    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+ }
+ static const VMStateDescription vmstate_npcm7xx_rng = {
+diff --git a/hw/nvram/npcm7xx_otp.c b/hw/nvram/npcm7xx_otp.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/nvram/npcm7xx_otp.c
++++ b/hw/nvram/npcm7xx_otp.c
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_otp_realize(DeviceState *dev, Error **errp)
+ {
+     NPCM7xxOTPClass *oc = NPCM7XX_OTP_GET_CLASS(dev);
+     NPCM7xxOTPState *s = NPCM7XX_OTP(dev);
+-    SysBusDevice *sbd = &s->parent;
++    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+     memset(s->array, 0, sizeof(s->array));
+diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c
+index XXXXXXX..XXXXXXX 100644
+--- a/hw/ssi/npcm7xx_fiu.c
++++ b/hw/ssi/npcm7xx_fiu.c
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_hold_reset(Object *obj)
+ static void npcm7xx_fiu_realize(DeviceState *dev, Error **errp)
+ {
+     NPCM7xxFIUState *s = NPCM7XX_FIU(dev);
+-    SysBusDevice *sbd = &s->parent;
++    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+     int i;
+     if (s->cs_count <= 0) {
+--
+.20.1

-[PULL 3/3] hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine
+[PULL 21/21] ui/cocoa: Fix openFile: deprecation on Big Sur
-From: Clement Deschamps <clement.deschamps@greensocs.com>
+From: Roman Bolshakov <r.bolshakov@yadro.com>
-The boot.c code usually puts the CPU into NS mode directly when it is
+ui/cocoa.m:1188:44: warning: 'openFile:' is deprecated: first deprecated in macOS 11.0 - Use -[NSWorkspace openURL:] instead.
-booting a kernel.  Since fc1120a7f5f2d4b6 this has included a
+      [-Wdeprecated-declarations]
-requirement to set NSACR to give NS state access to the FPU; we fixed
+        if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) {
-that for the usual code path in ece628fcf6.  However, it is also
+                                           ^
-possible for a board model to request an alternative mode of booting,
+/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSWorkspace.h:350:1: note:
-where its 'board_setup' code hook runs in Secure state and is
+      'openFile:' has been explicitly marked deprecated here
-responsible for doing the S->NS transition after it has done whatever
+- (BOOL)openFile:(NSString *)fullPath API_DEPRECATED("Use -[NSWorkspace openURL:] instead.", macos(10.0, 11.0));
-work it must do in Secure state.  In this situation the board_setup
+^
 code now also needs to update NSACR.
-This affects all boards which set info->secure_board_setup, which is
+Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
 currently the 'raspi' and 'highbank' families.  They both use the
 common arm_write_secure_board_setup_dummy_smc().
 Set the NSACR CP11 and CP10 bits in the code written by that
 function, to allow FPU access in Non-Secure state when using dummy
 SMC setup routine.  Otherwise an AArch32 kernel booted on the
 highbank or raspi boards will UNDEF as soon as it tries to use the
 FPU.
 Update the comment describing secure_board_setup to note the new
 requirements on users of it.
 This fixes a kernel panic when booting raspbian on raspi2.
 Successfully tested with:
 -01-11-raspbian-jessie-lite.img
 -11-13-raspbian-stretch-lite.img
 -07-10-raspbian-buster-lite.img
 Fixes: fc1120a7f5
 Signed-off-by: Clement Deschamps <clement.deschamps@greensocs.com>
 Tested-by: Laurent Bonnans <laurent.bonnans@here.com>
 Message-id: 20191104151137.81931-1-clement.deschamps@greensocs.com
 Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
-[PMM: updated comment to boot.h to note new requirement on
+Message-id: 20210102150718.47618-1-r.bolshakov@yadro.com
  users of secure_board_setup; edited/rewrote commit message]
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 ---
- include/hw/arm/boot.h | 7 +++++--
+ ui/cocoa.m | 5 ++++-
- hw/arm/boot.c         | 3 +++
+file changed, 4 insertions(+), 1 deletion(-)
 files changed, 8 insertions(+), 2 deletions(-)
-diff --git a/include/hw/arm/boot.h b/include/hw/arm/boot.h
+diff --git a/ui/cocoa.m b/ui/cocoa.m
 index XXXXXXX..XXXXXXX 100644
---- a/include/hw/arm/boot.h
+--- a/ui/cocoa.m
-+++ b/include/hw/arm/boot.h
++++ b/ui/cocoa.m
-@@ -XXX,XX +XXX,XX @@ struct arm_boot_info {
+@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
-     void (*write_board_setup)(ARMCPU *cpu,
+     /* Where to look for local files */
-                               const struct arm_boot_info *info);
+     NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"};
+     NSString *full_file_path;
--    /* If set, the board specific loader/setup blob will be run from secure
++    NSURL *full_file_url;
-+    /*
-+     * If set, the board specific loader/setup blob will be run from secure
+     /* iterate thru the possible paths until the file is found */
-      * mode, regardless of secure_boot. The blob becomes responsible for
+     int index;
--     * changing to non-secure state if implementing a non-secure boot
+@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
-+     * changing to non-secure state if implementing a non-secure boot,
+         full_file_path = [full_file_path stringByDeletingLastPathComponent];
-+     * including setting up EL3/Secure registers such as the NSACR as
+         full_file_path = [NSString stringWithFormat: @"%@/%@%@", full_file_path,
-+     * required by the Linux booting ABI before the switch to non-secure.
+                           path_array[index], filename];
-      */
+-        if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) {
-     bool secure_board_setup;
++        full_file_url = [NSURL fileURLWithPath: full_file_path
++                                   isDirectory: false];
-diff --git a/hw/arm/boot.c b/hw/arm/boot.c
++        if ([[NSWorkspace sharedWorkspace] openURL: full_file_url] == YES) {
-index XXXXXXX..XXXXXXX 100644
+             return;
---- a/hw/arm/boot.c
+         }
-+++ b/hw/arm/boot.c
+     }
@@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu,
      };
      uint32_t board_setup_blob[] = {
          /* board setup addr */
 +        0xee110f51, /* mrc     p15, 0, r0, c1, c1, 2  ;read NSACR */
 +        0xe3800b03, /* orr     r0, #0xc00             ;set CP11, CP10 */
 +        0xee010f51, /* mcr     p15, 0, r0, c1, c1, 2  ;write NSACR */
 xe3a00e00 + (mvbar_addr >> 4), /* mov r0, #mvbar_addr */
 xee0c0f30, /* mcr     p15, 0, r0, c12, c0, 1 ;set MVBAR */
 xee110f11, /* mrc     p15, 0, r0, c1 , c1, 0 ;read SCR */
 --
 .20.1

Arm patches for rc1:
 * two final "remove the old API" patches for some API transitions
 * bugfix for raspi/highbank Linux boot

thanks
-- PMM

The following changes since commit 654efcb511d394c1d3f5292c28503d1d19e5b1d3:

Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' into staging (2019-11-11 09:23:46 +0000)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191111

for you to fetch changes up to 45c078f163fd47c35e7505d98928fae63baada7d:

hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine (2019-11-11 13:44:16 +0000)

----------------------------------------------------------------
target-arm queue:
 * Remove old unassigned_access CPU hook API
 * Remove old ptimer_init_with_bh() API
 * hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine

----------------------------------------------------------------
Clement Deschamps (1):
      hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine

Peter Maydell (2):
      ptimer: Remove old ptimer_init_with_bh() API
      Remove unassigned_access CPU hook

Now all the users of ptimers have converted to the transaction-based
API, we can remove ptimer_init_with_bh() and all the code paths
that are used only by bottom-half based ptimers, and tidy up the
documentation comments to consider the transaction-based API the
only possibility.

The code changes result from:
 * s->bh no longer exists
 * s->callback is now always non-NULL

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191025142411.17085-1-peter.maydell@linaro.org
---
 include/hw/ptimer.h | 45 +++++++++++-----------
 hw/core/ptimer.c    | 91 ++++++++-------------------------------------
 2 files changed, 36 insertions(+), 100 deletions(-)

diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/ptimer.h
+++ b/include/hw/ptimer.h
@@ -XXX,XX +XXX,XX @@
 
 #include "qemu/timer.h"
 
-/* The ptimer API implements a simple periodic countdown timer.
+/*
+ * The ptimer API implements a simple periodic countdown timer.
  * The countdown timer has a value (which can be read and written via
  * ptimer_get_count() and ptimer_set_count()). When it is enabled
  * using ptimer_run(), the value will count downwards at the frequency
  * which has been configured using ptimer_set_period() or ptimer_set_freq().
- * When it reaches zero it will trigger a QEMU bottom half handler, and
+ * When it reaches zero it will trigger a callback function, and
  * can be set to either reload itself from a specified limit value
  * and keep counting down, or to stop (as a one-shot timer).
  *
+ * A transaction-based API is used for modifying ptimer state: all calls
+ * to functions which modify ptimer state must be between matched calls to
+ * ptimer_transaction_begin() and ptimer_transaction_commit().
+ * When ptimer_transaction_commit() is called it will evaluate the state
+ * of the timer after all the changes in the transaction, and call the
+ * callback if necessary. (See the ptimer_init() documentation for the full
+ * list of state-modifying functions and detailed semantics of the callback.)
+ *
  * Forgetting to set the period/frequency (or setting it to zero) is a
  * bug in the QEMU device and will cause warning messages to be printed
  * to stderr when the guest attempts to enable the timer.
@@ -XXX,XX +XXX,XX @@
  * ptimer_set_count() or ptimer_set_limit() will not trigger the timer
  * (though it will cause a reload). Only a counter decrement to "0"
  * will cause a trigger. Not compatible with NO_IMMEDIATE_TRIGGER;
- * ptimer_init_with_bh() will assert() that you don't set both.
+ * ptimer_init() will assert() that you don't set both.
  */
 #define PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT (1 << 5)
 
@@ -XXX,XX +XXX,XX @@
 typedef struct ptimer_state ptimer_state;
 typedef void (*ptimer_cb)(void *opaque);
 
-/**
- * ptimer_init_with_bh - Allocate and return a new ptimer
- * @bh: QEMU bottom half which is run on timer expiry
- * @policy: PTIMER_POLICY_* bits specifying behaviour
- *
- * The ptimer returned must be freed using ptimer_free().
- * The ptimer takes ownership of @bh and will delete it
- * when the ptimer is eventually freed.
- */
-ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask);
-
 /**
  * ptimer_init - Allocate and return a new ptimer
  * @callback: function to call on ptimer expiry
@@ -XXX,XX +XXX,XX @@ ptimer_state *ptimer_init(ptimer_cb callback,
  * ptimer_free - Free a ptimer
  * @s: timer to free
  *
- * Free a ptimer created using ptimer_init_with_bh() (including
- * deleting the bottom half which it is using).
+ * Free a ptimer created using ptimer_init().
  */
 void ptimer_free(ptimer_state *s);
 
@@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s);
  * may be more appropriate.
  *
  * This function will assert if it is called outside a
- * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
+ * ptimer_transaction_begin/commit block.
  */
 void ptimer_set_period(ptimer_state *s, int64_t period);
 
@@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period);
  * precise to fractions of a nanosecond, avoiding rounding errors.
  *
  * This function will assert if it is called outside a
- * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
+ * ptimer_transaction_begin/commit block.
  */
 void ptimer_set_freq(ptimer_state *s, uint32_t freq);
 
@@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_limit(ptimer_state *s);
  * reload the counter when their reload register is written to.
  *
  * This function will assert if it is called outside a
- * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
+ * ptimer_transaction_begin/commit block.
  */
 void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload);
 
@@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_count(ptimer_state *s);
  * point in the future.
  *
  * This function will assert if it is called outside a
- * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
+ * ptimer_transaction_begin/commit block.
  */
 void ptimer_set_count(ptimer_state *s, uint64_t count);
 
@@ -XXX,XX +XXX,XX @@ void ptimer_set_count(ptimer_state *s, uint64_t count);
  * @s: ptimer
  * @oneshot: non-zero if this timer should only count down once
  *
- * Start a ptimer counting down; when it reaches zero the bottom half
- * passed to ptimer_init_with_bh() will be invoked.
+ * Start a ptimer counting down; when it reaches zero the callback function
+ * passed to ptimer_init() will be invoked.
  * If the @oneshot argument is zero,
  * the counter value will then be reloaded from the limit and it will
  * start counting down again. If @oneshot is non-zero, then the counter
  * will disable itself when it reaches zero.
  *
  * This function will assert if it is called outside a
- * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
+ * ptimer_transaction_begin/commit block.
  */
 void ptimer_run(ptimer_state *s, int oneshot);
 
@@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot);
  * restarted.
  *
  * This function will assert if it is called outside a
- * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer.
+ * ptimer_transaction_begin/commit block.
  */
 void ptimer_stop(ptimer_state *s);
 
diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/core/ptimer.c
+++ b/hw/core/ptimer.c
@@ -XXX,XX +XXX,XX @@ struct ptimer_state
     int64_t last_event;
     int64_t next_event;
     uint8_t policy_mask;
-    QEMUBH *bh;
     QEMUTimer *timer;
     ptimer_cb callback;
     void *callback_opaque;
@@ -XXX,XX +XXX,XX @@ struct ptimer_state
 /* Use a bottom-half routine to avoid reentrancy issues.  */
 static void ptimer_trigger(ptimer_state *s)
 {
-    if (s->bh) {
-        replay_bh_schedule_event(s->bh);
-    }
-    if (s->callback) {
-        s->callback(s->callback_opaque);
-    }
+    s->callback(s->callback_opaque);
 }
 
 static void ptimer_reload(ptimer_state *s, int delta_adjust)
@@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_count(ptimer_state *s)
 
 void ptimer_set_count(ptimer_state *s, uint64_t count)
 {
-    assert(s->in_transaction || !s->callback);
+    assert(s->in_transaction);
     s->delta = count;
     if (s->enabled) {
-        if (!s->callback) {
-            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-            ptimer_reload(s, 0);
-        } else {
-            s->need_reload = true;
-        }
+        s->need_reload = true;
     }
 }
 
@@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot)
 {
     bool was_disabled = !s->enabled;
 
-    assert(s->in_transaction || !s->callback);
+    assert(s->in_transaction);
 
     if (was_disabled && s->period == 0) {
         if (!qtest_enabled()) {
@@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot)
     }
     s->enabled = oneshot ? 2 : 1;
     if (was_disabled) {
-        if (!s->callback) {
-            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-            ptimer_reload(s, 0);
-        } else {
-            s->need_reload = true;
-        }
+        s->need_reload = true;
     }
 }
 
@@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot)
    is immediately restarted.  */
 void ptimer_stop(ptimer_state *s)
 {
-    assert(s->in_transaction || !s->callback);
+    assert(s->in_transaction);
 
     if (!s->enabled)
         return;
@@ -XXX,XX +XXX,XX @@ void ptimer_stop(ptimer_state *s)
     s->delta = ptimer_get_count(s);
     timer_del(s->timer);
     s->enabled = 0;
-    if (s->callback) {
-        s->need_reload = false;
-    }
+    s->need_reload = false;
 }
 
 /* Set counter increment interval in nanoseconds.  */
 void ptimer_set_period(ptimer_state *s, int64_t period)
 {
-    assert(s->in_transaction || !s->callback);
+    assert(s->in_transaction);
     s->delta = ptimer_get_count(s);
     s->period = period;
     s->period_frac = 0;
     if (s->enabled) {
-        if (!s->callback) {
-            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-            ptimer_reload(s, 0);
-        } else {
-            s->need_reload = true;
-        }
+        s->need_reload = true;
     }
 }
 
 /* Set counter frequency in Hz.  */
 void ptimer_set_freq(ptimer_state *s, uint32_t freq)
 {
-    assert(s->in_transaction || !s->callback);
+    assert(s->in_transaction);
     s->delta = ptimer_get_count(s);
     s->period = 1000000000ll / freq;
     s->period_frac = (1000000000ll << 32) / freq;
     if (s->enabled) {
-        if (!s->callback) {
-            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-            ptimer_reload(s, 0);
-        } else {
-            s->need_reload = true;
-        }
+        s->need_reload = true;
     }
 }
 
@@ -XXX,XX +XXX,XX @@ void ptimer_set_freq(ptimer_state *s, uint32_t freq)
    count = limit.  */
 void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload)
 {
-    assert(s->in_transaction || !s->callback);
+    assert(s->in_transaction);
     s->limit = limit;
     if (reload)
         s->delta = limit;
     if (s->enabled && reload) {
-        if (!s->callback) {
-            s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-            ptimer_reload(s, 0);
-        } else {
-            s->need_reload = true;
-        }
+        s->need_reload = true;
     }
 }
 
@@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_limit(ptimer_state *s)
 
 void ptimer_transaction_begin(ptimer_state *s)
 {
-    assert(!s->in_transaction || !s->callback);
+    assert(!s->in_transaction);
     s->in_transaction = true;
     s->need_reload = false;
 }
@@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_ptimer = {
     }
 };
 
-ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask)
-{
-    ptimer_state *s;
-
-    s = (ptimer_state *)g_malloc0(sizeof(ptimer_state));
-    s->bh = bh;
-    s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, ptimer_tick, s);
-    s->policy_mask = policy_mask;
-
-    /*
-     * These two policies are incompatible -- trigger-on-decrement implies
-     * a timer trigger when the count becomes 0, but no-immediate-trigger
-     * implies a trigger when the count stops being 0.
-     */
-    assert(!((policy_mask & PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT) &&
-             (policy_mask & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER)));
-    return s;
-}
-
 ptimer_state *ptimer_init(ptimer_cb callback, void *callback_opaque,
                           uint8_t policy_mask)
 {
     ptimer_state *s;
 
-    /*
-     * The callback function is mandatory; so we use it to distinguish
-     * old-style QEMUBH ptimers from new transaction API ptimers.
-     * (ptimer_init_with_bh() allows a NULL bh pointer and at least
-     * one device (digic-timer) passes NULL, so it's not the case
-     * that either s->bh != NULL or s->callback != NULL.)
-     */
+    /* The callback function is mandatory. */
     assert(callback);
 
     s = g_new0(ptimer_state, 1);
@@ -XXX,XX +XXX,XX @@ ptimer_state *ptimer_init(ptimer_cb callback, void *callback_opaque,
 
 void ptimer_free(ptimer_state *s)
 {
-    if (s->bh) {
-        qemu_bh_delete(s->bh);
-    }
     timer_free(s->timer);
     g_free(s);
 }
-- 
2.20.1

All targets have now migrated away from the old unassigned_access
hook to the new do_transaction_failed hook. This means we can remove
the core-code infrastructure for that hook and the code that calls it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191108173732.11816-1-peter.maydell@linaro.org
---
 include/hw/core/cpu.h | 24 ------------------------
 accel/tcg/cputlb.c    |  2 --
 memory.c              |  7 -------
 3 files changed, 33 deletions(-)

diff --git a/include/hw/core/cpu.h b/include/hw/core/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/core/cpu.h
+++ b/include/hw/core/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef enum MMUAccessType {
 
 typedef struct CPUWatchpoint CPUWatchpoint;
 
-typedef void (*CPUUnassignedAccess)(CPUState *cpu, hwaddr addr,
-                                    bool is_write, bool is_exec, int opaque,
-                                    unsigned size);
-
 struct TranslationBlock;
 
 /**
@@ -XXX,XX +XXX,XX @@ struct TranslationBlock;
  * @reset_dump_flags: #CPUDumpFlags to use for reset logging.
  * @has_work: Callback for checking if there is work to do.
  * @do_interrupt: Callback for interrupt handling.
- * @do_unassigned_access: Callback for unassigned access handling.
- * (this is deprecated: new targets should use do_transaction_failed instead)
  * @do_unaligned_access: Callback for unaligned access handling, if
  * the target defines #TARGET_ALIGNED_ONLY.
  * @do_transaction_failed: Callback for handling failed memory transactions
@@ -XXX,XX +XXX,XX @@ typedef struct CPUClass {
     int reset_dump_flags;
     bool (*has_work)(CPUState *cpu);
     void (*do_interrupt)(CPUState *cpu);
-    CPUUnassignedAccess do_unassigned_access;
     void (*do_unaligned_access)(CPUState *cpu, vaddr addr,
                                 MMUAccessType access_type,
                                 int mmu_idx, uintptr_t retaddr);
@@ -XXX,XX +XXX,XX @@ struct CPUState {
      * we store some rarely used information in the CPU context.
      */
     uintptr_t mem_io_pc;
-    /*
-     * This is only needed for the legacy cpu_unassigned_access() hook;
-     * when all targets using it have been converted to use
-     * cpu_transaction_failed() instead it can be removed.
-     */
-    MMUAccessType mem_io_access_type;
 
     int kvm_fd;
     struct KVMState *kvm_state;
@@ -XXX,XX +XXX,XX @@ void cpu_interrupt(CPUState *cpu, int mask);
 #ifdef NEED_CPU_H
 
 #ifdef CONFIG_SOFTMMU
-static inline void cpu_unassigned_access(CPUState *cpu, hwaddr addr,
-                                         bool is_write, bool is_exec,
-                                         int opaque, unsigned size)
-{
-    CPUClass *cc = CPU_GET_CLASS(cpu);
-
-    if (cc->do_unassigned_access) {
-        cc->do_unassigned_access(cpu, addr, is_write, is_exec, opaque, size);
-    }
-}
-
 static inline void cpu_unaligned_access(CPUState *cpu, vaddr addr,
                                         MMUAccessType access_type,
                                         int mmu_idx, uintptr_t retaddr)
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index XXXXXXX..XXXXXXX 100644
--- a/accel/tcg/cputlb.c
+++ b/accel/tcg/cputlb.c
@@ -XXX,XX +XXX,XX @@ static uint64_t io_readx(CPUArchState *env, CPUIOTLBEntry *iotlbentry,
         cpu_io_recompile(cpu, retaddr);
     }
 
-    cpu->mem_io_access_type = access_type;
-
     if (mr->global_locking && !qemu_mutex_iothread_locked()) {
         qemu_mutex_lock_iothread();
         locked = true;
diff --git a/memory.c b/memory.c
index XXXXXXX..XXXXXXX 100644
--- a/memory.c
+++ b/memory.c
@@ -XXX,XX +XXX,XX @@ static uint64_t unassigned_mem_read(void *opaque, hwaddr addr,
 #ifdef DEBUG_UNASSIGNED
     printf("Unassigned mem read " TARGET_FMT_plx "\n", addr);
 #endif
-    if (current_cpu != NULL) {
-        bool is_exec = current_cpu->mem_io_access_type == MMU_INST_FETCH;
-        cpu_unassigned_access(current_cpu, addr, false, is_exec, 0, size);
-    }
     return 0;
 }
 
@@ -XXX,XX +XXX,XX @@ static void unassigned_mem_write(void *opaque, hwaddr addr,
 #ifdef DEBUG_UNASSIGNED
     printf("Unassigned mem write " TARGET_FMT_plx " = 0x%"PRIx64"\n", addr, val);
 #endif
-    if (current_cpu != NULL) {
-        cpu_unassigned_access(current_cpu, addr, true, false, 0, size);
-    }
 }
 
 static bool unassigned_mem_accepts(void *opaque, hwaddr addr,
-- 
2.20.1

From: Clement Deschamps <clement.deschamps@greensocs.com>

The boot.c code usually puts the CPU into NS mode directly when it is
booting a kernel.  Since fc1120a7f5f2d4b6 this has included a
requirement to set NSACR to give NS state access to the FPU; we fixed
that for the usual code path in ece628fcf6.  However, it is also
possible for a board model to request an alternative mode of booting,
where its 'board_setup' code hook runs in Secure state and is
responsible for doing the S->NS transition after it has done whatever
work it must do in Secure state.  In this situation the board_setup
code now also needs to update NSACR.

This affects all boards which set info->secure_board_setup, which is
currently the 'raspi' and 'highbank' families.  They both use the
common arm_write_secure_board_setup_dummy_smc().

Set the NSACR CP11 and CP10 bits in the code written by that
function, to allow FPU access in Non-Secure state when using dummy
SMC setup routine.  Otherwise an AArch32 kernel booted on the
highbank or raspi boards will UNDEF as soon as it tries to use the
FPU.

Update the comment describing secure_board_setup to note the new
requirements on users of it.

This fixes a kernel panic when booting raspbian on raspi2.

Successfully tested with:
  2017-01-11-raspbian-jessie-lite.img
  2018-11-13-raspbian-stretch-lite.img
  2019-07-10-raspbian-buster-lite.img

Fixes: fc1120a7f5
Signed-off-by: Clement Deschamps <clement.deschamps@greensocs.com>
Tested-by: Laurent Bonnans <laurent.bonnans@here.com>
Message-id: 20191104151137.81931-1-clement.deschamps@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: updated comment to boot.h to note new requirement on
 users of secure_board_setup; edited/rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/boot.h | 7 +++++--
 hw/arm/boot.c         | 3 +++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/hw/arm/boot.h b/include/hw/arm/boot.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/boot.h
+++ b/include/hw/arm/boot.h
@@ -XXX,XX +XXX,XX @@ struct arm_boot_info {
     void (*write_board_setup)(ARMCPU *cpu,
                               const struct arm_boot_info *info);
 
-    /* If set, the board specific loader/setup blob will be run from secure
+    /*
+     * If set, the board specific loader/setup blob will be run from secure
      * mode, regardless of secure_boot. The blob becomes responsible for
-     * changing to non-secure state if implementing a non-secure boot
+     * changing to non-secure state if implementing a non-secure boot,
+     * including setting up EL3/Secure registers such as the NSACR as
+     * required by the Linux booting ABI before the switch to non-secure.
      */
     bool secure_board_setup;
 
diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu,
     };
     uint32_t board_setup_blob[] = {
         /* board setup addr */
+        0xee110f51, /* mrc     p15, 0, r0, c1, c1, 2  ;read NSACR */
+        0xe3800b03, /* orr     r0, #0xc00             ;set CP11, CP10 */
+        0xee010f51, /* mcr     p15, 0, r0, c1, c1, 2  ;write NSACR */
         0xe3a00e00 + (mvbar_addr >> 4), /* mov r0, #mvbar_addr */
         0xee0c0f30, /* mcr     p15, 0, r0, c12, c0, 1 ;set MVBAR */
         0xee110f11, /* mrc     p15, 0, r0, c1 , c1, 0 ;read SCR */
-- 
2.20.1

Arm queue; not huge but I figured I might as well send it out since
I've been doing code review today and there's no queue of unprocessed
pullreqs...

thanks
-- PMM

The following changes since commit b3f846c59d8405bb87c551187721fc92ff2f1b92:

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-01-11v2' into staging (2021-01-11 15:15:35 +0000)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210112

for you to fetch changes up to 19d131395ccaf503db21dadd8257e6dc9fc1d7de:

ui/cocoa: Fix openFile: deprecation on Big Sur (2021-01-12 11:38:37 +0000)

----------------------------------------------------------------
target-arm queue:
 * arm: Support emulation of ARMv8.4-TTST extension
 * arm: Update cpu.h ID register field definitions
 * arm: Fix breakage of XScale instruction emulation
 * hw/net/lan9118: Fix RX Status FIFO PEEK value
 * npcm7xx: Add ADC and PWM emulation
 * ui/cocoa: Make "open docs" help menu entry work again when binary
   is run from the build tree
 * ui/cocoa: Fix openFile: deprecation on Big Sur
 * docs: Add qemu-storage-daemon(1) manpage to meson.build
 * docs: Build and install all the docs in a single manual

----------------------------------------------------------------
Hao Wu (6):
      hw/misc: Add clock converter in NPCM7XX CLK module
      hw/timer: Refactor NPCM7XX Timer to use CLK clock
      hw/adc: Add an ADC module for NPCM7XX
      hw/misc: Add a PWM module for NPCM7XX
      hw/misc: Add QTest for NPCM7XX PWM Module
      hw/*: Use type casting for SysBusDevice in NPCM7XX

Leif Lindholm (6):
      target/arm: fix typo in cpu.h ID_AA64PFR1 field name
      target/arm: make ARMCPU.clidr 64-bit
      target/arm: make ARMCPU.ctr 64-bit
      target/arm: add descriptions of CLIDR_EL1, CCSIDR_EL1, CTR_EL0 to cpu.h
      target/arm: add aarch64 ID register fields to cpu.h
      target/arm: add aarch32 ID register fields to cpu.h

Peter Maydell (5):
      docs: Add qemu-storage-daemon(1) manpage to meson.build
      docs: Build and install all the docs in a single manual
      target/arm: Don't decode insns in the XScale/iWMMXt space as cp insns
      hw/net/lan9118: Fix RX Status FIFO PEEK value
      hw/net/lan9118: Add symbolic constants for register offsets

Roman Bolshakov (2):
      ui/cocoa: Update path to docs in build tree
      ui/cocoa: Fix openFile: deprecation on Big Sur

Rémi Denis-Courmont (2):
      target/arm: ARMv8.4-TTST extension
      target/arm: enable Small Translation tables in max CPU

docs/conf.py                     |  46 ++-
 docs/devel/conf.py               |  15 -
 docs/index.html.in               |  17 -
 docs/interop/conf.py             |  28 --
 docs/meson.build                 |  65 ++--
 docs/specs/conf.py               |  16 -
 docs/system/arm/nuvoton.rst      |   4 +-
 docs/system/conf.py              |  28 --
 docs/tools/conf.py               |  37 --
 docs/user/conf.py                |  15 -
 meson.build                      |   1 +
 hw/adc/trace.h                   |   1 +
 include/hw/adc/npcm7xx_adc.h     |  69 ++++
 include/hw/arm/npcm7xx.h         |   4 +
 include/hw/misc/npcm7xx_clk.h    | 146 ++++++-
 include/hw/misc/npcm7xx_pwm.h    | 105 +++++
 include/hw/timer/npcm7xx_timer.h |   1 +
 target/arm/cpu.h                 |  85 ++++-
 hw/adc/npcm7xx_adc.c             | 301 +++++++++++++++
 hw/arm/npcm7xx.c                 |  55 ++-
 hw/arm/npcm7xx_boards.c          |   2 +-
 hw/mem/npcm7xx_mc.c              |   2 +-
 hw/misc/npcm7xx_clk.c            | 807 ++++++++++++++++++++++++++++++++++++++-
 hw/misc/npcm7xx_gcr.c            |   2 +-
 hw/misc/npcm7xx_pwm.c            | 550 ++++++++++++++++++++++++++
 hw/misc/npcm7xx_rng.c            |   2 +-
 hw/net/lan9118.c                 |  26 +-
 hw/nvram/npcm7xx_otp.c           |   2 +-
 hw/ssi/npcm7xx_fiu.c             |   2 +-
 hw/timer/npcm7xx_timer.c         |  39 +-
 target/arm/cpu64.c               |   1 +
 target/arm/helper.c              |  15 +-
 target/arm/translate.c           |   7 +
 tests/qtest/npcm7xx_adc-test.c   | 377 ++++++++++++++++++
 tests/qtest/npcm7xx_pwm-test.c   | 490 ++++++++++++++++++++++++
 hw/adc/meson.build               |   1 +
 hw/adc/trace-events              |   5 +
 hw/misc/meson.build              |   1 +
 hw/misc/trace-events             |   6 +
 tests/qtest/meson.build          |   4 +-
 ui/cocoa.m                       |   7 +-
 41 files changed, 3124 insertions(+), 263 deletions(-)
 delete mode 100644 docs/devel/conf.py
 delete mode 100644 docs/index.html.in
 delete mode 100644 docs/interop/conf.py
 delete mode 100644 docs/specs/conf.py
 delete mode 100644 docs/system/conf.py
 delete mode 100644 docs/tools/conf.py
 delete mode 100644 docs/user/conf.py
 create mode 100644 hw/adc/trace.h
 create mode 100644 include/hw/adc/npcm7xx_adc.h
 create mode 100644 include/hw/misc/npcm7xx_pwm.h
 create mode 100644 hw/adc/npcm7xx_adc.c
 create mode 100644 hw/misc/npcm7xx_pwm.c
 create mode 100644 tests/qtest/npcm7xx_adc-test.c
 create mode 100644 tests/qtest/npcm7xx_pwm-test.c
 create mode 100644 hw/adc/trace-events

From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>

This adds for the Small Translation tables extension in AArch64 state.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  5 +++++
 target/arm/helper.c | 15 +++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_uao(const ARMISARegisters *id)
     return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, UAO) != 0;
 }
 
+static inline bool isar_feature_aa64_st(const ARMISARegisters *id)
+{
+    return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, ST) != 0;
+}
+
 static inline bool isar_feature_aa64_bti(const ARMISARegisters *id)
 {
     return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, BT) != 0;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
 {
     uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
     bool epd, hpd, using16k, using64k;
-    int select, tsz, tbi;
+    int select, tsz, tbi, max_tsz;
 
     if (!regime_has_2_ranges(mmu_idx)) {
         select = 0;
@@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
             hpd = extract64(tcr, 42, 1);
         }
     }
-    tsz = MIN(tsz, 39);  /* TODO: ARMv8.4-TTST */
+
+    if (cpu_isar_feature(aa64_st, env_archcpu(env))) {
+        max_tsz = 48 - using64k;
+    } else {
+        max_tsz = 39;
+    }
+
+    tsz = MIN(tsz, max_tsz);
     tsz = MAX(tsz, 16);  /* TODO: ARMv8.2-LVA  */
 
     /* Present TBI as a composite with TBID.  */
@@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
         if (!aarch64 || stride == 9) {
             /* AArch32 or 4KB pages */
             startlevel = 2 - sl0;
+
+            if (cpu_isar_feature(aa64_st, cpu)) {
+                startlevel &= 3;
+            }
         } else {
             /* 16KB or 64KB pages */
             startlevel = 3 - sl0;
-- 
2.20.1

From: Leif Lindholm <leif@nuviainc.com>

The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit
32, as well as adding a Ttype<n> field when FEAT_MTE is implemented.
Extend the clidr field to be able to hold this context.

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-3-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ARMCPU {
     uint32_t id_afr0;
     uint64_t id_aa64afr0;
     uint64_t id_aa64afr1;
-    uint32_t clidr;
+    uint64_t clidr;
     uint64_t mp_affinity; /* MP ID without feature bits */
     /* The elements of this array are the CCSIDR values for each cache,
      * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
-- 
2.20.1

From: Leif Lindholm <leif@nuviainc.com>

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-5-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ FIELD(V7M_FPCCR, ASPEN, 31, 1)
 /*
  * System register ID fields.
  */
+FIELD(CLIDR_EL1, CTYPE1, 0, 3)
+FIELD(CLIDR_EL1, CTYPE2, 3, 3)
+FIELD(CLIDR_EL1, CTYPE3, 6, 3)
+FIELD(CLIDR_EL1, CTYPE4, 9, 3)
+FIELD(CLIDR_EL1, CTYPE5, 12, 3)
+FIELD(CLIDR_EL1, CTYPE6, 15, 3)
+FIELD(CLIDR_EL1, CTYPE7, 18, 3)
+FIELD(CLIDR_EL1, LOUIS, 21, 3)
+FIELD(CLIDR_EL1, LOC, 24, 3)
+FIELD(CLIDR_EL1, LOUU, 27, 3)
+FIELD(CLIDR_EL1, ICB, 30, 3)
+
+/* When FEAT_CCIDX is implemented */
+FIELD(CCSIDR_EL1, CCIDX_LINESIZE, 0, 3)
+FIELD(CCSIDR_EL1, CCIDX_ASSOCIATIVITY, 3, 21)
+FIELD(CCSIDR_EL1, CCIDX_NUMSETS, 32, 24)
+
+/* When FEAT_CCIDX is not implemented */
+FIELD(CCSIDR_EL1, LINESIZE, 0, 3)
+FIELD(CCSIDR_EL1, ASSOCIATIVITY, 3, 10)
+FIELD(CCSIDR_EL1, NUMSETS, 13, 15)
+
+FIELD(CTR_EL0,  IMINLINE, 0, 4)
+FIELD(CTR_EL0,  L1IP, 14, 2)
+FIELD(CTR_EL0,  DMINLINE, 16, 4)
+FIELD(CTR_EL0,  ERG, 20, 4)
+FIELD(CTR_EL0,  CWG, 24, 4)
+FIELD(CTR_EL0,  IDC, 28, 1)
+FIELD(CTR_EL0,  DIC, 29, 1)
+FIELD(CTR_EL0,  TMINLINE, 32, 6)
+
 FIELD(MIDR_EL1, REVISION, 0, 4)
 FIELD(MIDR_EL1, PARTNUM, 4, 12)
 FIELD(MIDR_EL1, ARCHITECTURE, 16, 4)
-- 
2.20.1

From: Leif Lindholm <leif@nuviainc.com>

Add entries present in ARM DDI 0487F.c (August 2020).

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-6-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64ISAR1, GPI, 28, 4)
 FIELD(ID_AA64ISAR1, FRINTTS, 32, 4)
 FIELD(ID_AA64ISAR1, SB, 36, 4)
 FIELD(ID_AA64ISAR1, SPECRES, 40, 4)
+FIELD(ID_AA64ISAR1, BF16, 44, 4)
+FIELD(ID_AA64ISAR1, DGH, 48, 4)
+FIELD(ID_AA64ISAR1, I8MM, 52, 4)
 
 FIELD(ID_AA64PFR0, EL0, 0, 4)
 FIELD(ID_AA64PFR0, EL1, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64PFR0, ADVSIMD, 20, 4)
 FIELD(ID_AA64PFR0, GIC, 24, 4)
 FIELD(ID_AA64PFR0, RAS, 28, 4)
 FIELD(ID_AA64PFR0, SVE, 32, 4)
+FIELD(ID_AA64PFR0, SEL2, 36, 4)
+FIELD(ID_AA64PFR0, MPAM, 40, 4)
+FIELD(ID_AA64PFR0, AMU, 44, 4)
+FIELD(ID_AA64PFR0, DIT, 48, 4)
+FIELD(ID_AA64PFR0, CSV2, 56, 4)
+FIELD(ID_AA64PFR0, CSV3, 60, 4)
 
 FIELD(ID_AA64PFR1, BT, 0, 4)
 FIELD(ID_AA64PFR1, SSBS, 4, 4)
 FIELD(ID_AA64PFR1, MTE, 8, 4)
 FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4)
+FIELD(ID_AA64PFR1, MPAM_FRAC, 16, 4)
 
 FIELD(ID_AA64MMFR0, PARANGE, 0, 4)
 FIELD(ID_AA64MMFR0, ASIDBITS, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR0, TGRAN16_2, 32, 4)
 FIELD(ID_AA64MMFR0, TGRAN64_2, 36, 4)
 FIELD(ID_AA64MMFR0, TGRAN4_2, 40, 4)
 FIELD(ID_AA64MMFR0, EXS, 44, 4)
+FIELD(ID_AA64MMFR0, FGT, 56, 4)
+FIELD(ID_AA64MMFR0, ECV, 60, 4)
 
 FIELD(ID_AA64MMFR1, HAFDBS, 0, 4)
 FIELD(ID_AA64MMFR1, VMIDBITS, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR1, LO, 16, 4)
 FIELD(ID_AA64MMFR1, PAN, 20, 4)
 FIELD(ID_AA64MMFR1, SPECSEI, 24, 4)
 FIELD(ID_AA64MMFR1, XNX, 28, 4)
+FIELD(ID_AA64MMFR1, TWED, 32, 4)
+FIELD(ID_AA64MMFR1, ETS, 36, 4)
 
 FIELD(ID_AA64MMFR2, CNP, 0, 4)
 FIELD(ID_AA64MMFR2, UAO, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64DFR0, CTX_CMPS, 28, 4)
 FIELD(ID_AA64DFR0, PMSVER, 32, 4)
 FIELD(ID_AA64DFR0, DOUBLELOCK, 36, 4)
 FIELD(ID_AA64DFR0, TRACEFILT, 40, 4)
+FIELD(ID_AA64DFR0, MTPMU, 48, 4)
 
 FIELD(ID_DFR0, COPDBG, 0, 4)
 FIELD(ID_DFR0, COPSDBG, 4, 4)
-- 
2.20.1

From: Leif Lindholm <leif@nuviainc.com>

Add entries present in ARM DDI 0487F.c (August 2020).

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-7-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ FIELD(ID_ISAR6, DP, 4, 4)
 FIELD(ID_ISAR6, FHM, 8, 4)
 FIELD(ID_ISAR6, SB, 12, 4)
 FIELD(ID_ISAR6, SPECRES, 16, 4)
+FIELD(ID_ISAR6, BF16, 20, 4)
+FIELD(ID_ISAR6, I8MM, 24, 4)
 
 FIELD(ID_MMFR0, VMSA, 0, 4)
 FIELD(ID_MMFR0, PMSA, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR0, AUXREG, 20, 4)
 FIELD(ID_MMFR0, FCSE, 24, 4)
 FIELD(ID_MMFR0, INNERSHR, 28, 4)
 
+FIELD(ID_MMFR1, L1HVDVA, 0, 4)
+FIELD(ID_MMFR1, L1UNIVA, 4, 4)
+FIELD(ID_MMFR1, L1HVDSW, 8, 4)
+FIELD(ID_MMFR1, L1UNISW, 12, 4)
+FIELD(ID_MMFR1, L1HVD, 16, 4)
+FIELD(ID_MMFR1, L1UNI, 20, 4)
+FIELD(ID_MMFR1, L1TSTCLN, 24, 4)
+FIELD(ID_MMFR1, BPRED, 28, 4)
+
+FIELD(ID_MMFR2, L1HVDFG, 0, 4)
+FIELD(ID_MMFR2, L1HVDBG, 4, 4)
+FIELD(ID_MMFR2, L1HVDRNG, 8, 4)
+FIELD(ID_MMFR2, HVDTLB, 12, 4)
+FIELD(ID_MMFR2, UNITLB, 16, 4)
+FIELD(ID_MMFR2, MEMBARR, 20, 4)
+FIELD(ID_MMFR2, WFISTALL, 24, 4)
+FIELD(ID_MMFR2, HWACCFLG, 28, 4)
+
 FIELD(ID_MMFR3, CMAINTVA, 0, 4)
 FIELD(ID_MMFR3, CMAINTSW, 4, 4)
 FIELD(ID_MMFR3, BPMAINT, 8, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR4, LSM, 20, 4)
 FIELD(ID_MMFR4, CCIDX, 24, 4)
 FIELD(ID_MMFR4, EVT, 28, 4)
 
+FIELD(ID_MMFR5, ETS, 0, 4)
+
 FIELD(ID_PFR0, STATE0, 0, 4)
 FIELD(ID_PFR0, STATE1, 4, 4)
 FIELD(ID_PFR0, STATE2, 8, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_PFR1, SEC_FRAC, 20, 4)
 FIELD(ID_PFR1, VIRT_FRAC, 24, 4)
 FIELD(ID_PFR1, GIC, 28, 4)
 
+FIELD(ID_PFR2, CSV3, 0, 4)
+FIELD(ID_PFR2, SSBS, 4, 4)
+FIELD(ID_PFR2, RAS_FRAC, 8, 4)
+
 FIELD(ID_AA64ISAR0, AES, 4, 4)
 FIELD(ID_AA64ISAR0, SHA1, 8, 4)
 FIELD(ID_AA64ISAR0, SHA2, 12, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_DFR0, MPROFDBG, 20, 4)
 FIELD(ID_DFR0, PERFMON, 24, 4)
 FIELD(ID_DFR0, TRACEFILT, 28, 4)
 
+FIELD(ID_DFR1, MTPMU, 0, 4)
+
 FIELD(DBGDIDR, SE_IMP, 12, 1)
 FIELD(DBGDIDR, NSUHD_IMP, 14, 1)
 FIELD(DBGDIDR, VERSION, 16, 4)
-- 
2.20.1

From: Roman Bolshakov <r.bolshakov@yadro.com>

QEMU documentation can't be opened if QEMU is run from build tree
because executables are placed in the top of build tree after conversion
to meson.

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108213815.64678-1-r.bolshakov@yadro.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 ui/cocoa.m | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/ui/cocoa.m b/ui/cocoa.m
index XXXXXXX..XXXXXXX 100644
--- a/ui/cocoa.m
+++ b/ui/cocoa.m
@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
 - (void) openDocumentation: (NSString *) filename
 {
     /* Where to look for local files */
-    NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"../docs/"};
+    NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"};
     NSString *full_file_path;
 
     /* iterate thru the possible paths until the file is found */
-- 
2.20.1

In commit 1982e1602d15 we added a new qemu-storage-daemon(1) manpage.
At the moment new manpages have to be listed both in the conf.py for
Sphinx and also in docs/meson.build for Meson. We forgot the second
of those -- correct the omission.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210108161416.21129-2-peter.maydell@linaro.org
---
 docs/meson.build | 1 +
 1 file changed, 1 insertion(+)

diff --git a/docs/meson.build b/docs/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/docs/meson.build
+++ b/docs/meson.build
@@ -XXX,XX +XXX,XX @@ if build_docs
         'qemu-img.1': (have_tools ? 'man1' : ''),
         'qemu-nbd.8': (have_tools ? 'man8' : ''),
         'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
+        'qemu-storage-daemon.1': (have_tools ? 'man1' : ''),
         'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
         'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
         'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
-- 
2.20.1

When we first converted our documentation to Sphinx, we split it into
multiple manuals (system, interop, tools, etc), which are all built
separately.  The primary driver for this was wanting to be able to
avoid shipping the 'devel' manual to end-users.  However, this is
working against the grain of the way Sphinx wants to be used and
causes some annoyances:
 * Cross-references between documents become much harder or
   possibly impossible
 * There is no single index to the whole documentation
 * Within one manual there's no links or table-of-contents info
   that lets you easily navigate to the others
 * The devel manual doesn't get published on the QEMU website
   (it would be nice to able to refer to it there)

Merely hiding our developer documentation from end users seems like
it's not enough benefit for these costs.  Combine all the
documentation into a single manual (the same way that the readthedocs
site builds it) and install the whole thing.  The previous manual
divisions remain as the new top level sections in the manual.

* The per-manual conf.py files are no longer needed
 * The man_pages[] specifications previously in each per-manual
   conf.py move to the top level conf.py
 * docs/meson.build logic is simplified as we now only need to run
   Sphinx once for the HTML and then once for the manpages5B
 * The old index.html.in that produced the top-level page with
   links to each manual is no longer needed

Unfortunately this means that we now have to build the HTML
documentation into docs/manual in the build tree rather than directly
into docs/; otherwise it is too awkward to ensure we install only the
built manual and not also the dependency info, stamp file, etc.  The
manual still ends up in the same place in the final installed
directory, but anybody who was consulting documentation from within
the build tree will have to adjust where they're looking.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210108161416.21129-3-peter.maydell@linaro.org
---
 docs/conf.py         | 46 ++++++++++++++++++++++++++++++-
 docs/devel/conf.py   | 15 -----------
 docs/index.html.in   | 17 ------------
 docs/interop/conf.py | 28 -------------------
 docs/meson.build     | 64 +++++++++++++++++---------------------------
 docs/specs/conf.py   | 16 -----------
 docs/system/conf.py  | 28 -------------------
 docs/tools/conf.py   | 37 -------------------------
 docs/user/conf.py    | 15 -----------
 9 files changed, 70 insertions(+), 196 deletions(-)
 delete mode 100644 docs/devel/conf.py
 delete mode 100644 docs/index.html.in
 delete mode 100644 docs/interop/conf.py
 delete mode 100644 docs/specs/conf.py
 delete mode 100644 docs/system/conf.py
 delete mode 100644 docs/tools/conf.py
 delete mode 100644 docs/user/conf.py

diff --git a/docs/conf.py b/docs/conf.py
index XXXXXXX..XXXXXXX 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -XXX,XX +XXX,XX @@ latex_documents = [
 
 # -- Options for manual page output ---------------------------------------
 # Individual manual/conf.py can override this to create man pages
-man_pages = []
+man_pages = [
+    ('interop/qemu-ga', 'qemu-ga',
+     'QEMU Guest Agent',
+     ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
+    ('interop/qemu-ga-ref', 'qemu-ga-ref',
+     'QEMU Guest Agent Protocol Reference',
+     [], 7),
+    ('interop/qemu-qmp-ref', 'qemu-qmp-ref',
+     'QEMU QMP Reference Manual',
+     [], 7),
+    ('interop/qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
+     'QEMU Storage Daemon QMP Reference Manual',
+     [], 7),
+    ('system/qemu-manpage', 'qemu',
+     'QEMU User Documentation',
+     ['Fabrice Bellard'], 1),
+    ('system/qemu-block-drivers', 'qemu-block-drivers',
+     'QEMU block drivers reference',
+     ['Fabrice Bellard and the QEMU Project developers'], 7),
+    ('system/qemu-cpu-models', 'qemu-cpu-models',
+     'QEMU CPU Models',
+     ['The QEMU Project developers'], 7),
+    ('tools/qemu-img', 'qemu-img',
+     'QEMU disk image utility',
+     ['Fabrice Bellard'], 1),
+    ('tools/qemu-nbd', 'qemu-nbd',
+     'QEMU Disk Network Block Device Server',
+     ['Anthony Liguori <anthony@codemonkey.ws>'], 8),
+    ('tools/qemu-pr-helper', 'qemu-pr-helper',
+     'QEMU persistent reservation helper',
+     [], 8),
+    ('tools/qemu-storage-daemon', 'qemu-storage-daemon',
+     'QEMU storage daemon',
+     [], 1),
+    ('tools/qemu-trace-stap', 'qemu-trace-stap',
+     'QEMU SystemTap trace tool',
+     [], 1),
+    ('tools/virtfs-proxy-helper', 'virtfs-proxy-helper',
+     'QEMU 9p virtfs proxy filesystem helper',
+     ['M. Mohan Kumar'], 1),
+    ('tools/virtiofsd', 'virtiofsd',
+     'QEMU virtio-fs shared file system daemon',
+     ['Stefan Hajnoczi <stefanha@redhat.com>',
+      'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
+]
 
 # -- Options for Texinfo output -------------------------------------------
 
diff --git a/docs/devel/conf.py b/docs/devel/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/devel/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'devel' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = u'Developer''s Guide'
diff --git a/docs/index.html.in b/docs/index.html.in
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/index.html.in
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-<!DOCTYPE html>
-<html lang="en">
-    <head>
-        <meta charset="UTF-8">
-        <title>QEMU @VERSION@ Documentation</title>
-    </head>
-    <body>
-        <h1>QEMU @VERSION@ Documentation</h1>
-        <ul>
-            <li><a href="system/index.html">System Emulation User's Guide</a></li>
-            <li><a href="user/index.html">User Mode Emulation User's Guide</a></li>
-            <li><a href="tools/index.html">Tools Guide</a></li>
-            <li><a href="interop/index.html">System Emulation Management and Interoperability Guide</a></li>
-            <li><a href="specs/index.html">System Emulation Guest Hardware Specifications</a></li>
-        </ul>
-    </body>
-</html>
diff --git a/docs/interop/conf.py b/docs/interop/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/interop/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'interop' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = u'System Emulation Management and Interoperability Guide'
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('qemu-ga', 'qemu-ga', u'QEMU Guest Agent',
-     ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
-    ('qemu-ga-ref', 'qemu-ga-ref', 'QEMU Guest Agent Protocol Reference',
-     [], 7),
-    ('qemu-qmp-ref', 'qemu-qmp-ref', 'QEMU QMP Reference Manual',
-     [], 7),
-    ('qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
-     'QEMU Storage Daemon QMP Reference Manual', [], 7),
-]
diff --git a/docs/meson.build b/docs/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/docs/meson.build
+++ b/docs/meson.build
@@ -XXX,XX +XXX,XX @@ if build_docs
                           meson.source_root() / 'docs/sphinx/qmp_lexer.py',
                           qapi_gen_depends ]
 
-  configure_file(output: 'index.html',
-                 input: files('index.html.in'),
-                 configuration: {'VERSION': meson.project_version()},
-                 install_dir: qemu_docdir)
-  manuals = [ 'devel', 'interop', 'tools', 'specs', 'system', 'user' ]
   man_pages = {
-    'interop' : {
         'qemu-ga.8': (have_tools ? 'man8' : ''),
         'qemu-ga-ref.7': 'man7',
         'qemu-qmp-ref.7': 'man7',
         'qemu-storage-daemon-qmp-ref.7': (have_tools ? 'man7' : ''),
-    },
-    'tools': {
         'qemu-img.1': (have_tools ? 'man1' : ''),
         'qemu-nbd.8': (have_tools ? 'man8' : ''),
         'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
@@ -XXX,XX +XXX,XX @@ if build_docs
         'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
         'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
         'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
-    },
-    'system': {
         'qemu.1': 'man1',
         'qemu-block-drivers.7': 'man7',
         'qemu-cpu-models.7': 'man7'
-    },
   }
 
   sphinxdocs = []
   sphinxmans = []
-  foreach manual : manuals
-    private_dir = meson.current_build_dir() / (manual + '.p')
-    output_dir = meson.current_build_dir() / manual
-    input_dir = meson.current_source_dir() / manual
 
-    this_manual = custom_target(manual + ' manual',
+  private_dir = meson.current_build_dir() / 'manual.p'
+  output_dir = meson.current_build_dir() / 'manual'
+  input_dir = meson.current_source_dir()
+
+  this_manual = custom_target('QEMU manual',
                 build_by_default: build_docs,
-                output: [manual + '.stamp'],
-                input: [files('conf.py'), files(manual / 'conf.py')],
-                depfile: manual + '.d',
+                output: 'docs.stamp',
+                input: files('conf.py'),
+                depfile: 'docs.d',
                 depend_files: sphinx_extn_depends,
                 command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@',
                           '-Ddepfile_stamp=@OUTPUT0@',
                           '-b', 'html', '-d', private_dir,
                           input_dir, output_dir])
-    sphinxdocs += this_manual
-    if build_docs and manual != 'devel'
-      install_subdir(output_dir, install_dir: qemu_docdir)
-    endif
+  sphinxdocs += this_manual
+  install_subdir(output_dir, install_dir: qemu_docdir, strip_directory: true)
 
-    these_man_pages = []
-    install_dirs = []
-    foreach page, section : man_pages.get(manual, {})
-      these_man_pages += page
-      install_dirs += section == '' ? false : get_option('mandir') / section
-    endforeach
-    if these_man_pages.length() > 0
-      sphinxmans += custom_target(manual + ' man pages',
-                         build_by_default: build_docs,
-                         output: these_man_pages,
-                         input: this_manual,
-                         install: build_docs,
-                         install_dir: install_dirs,
-                         command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
-                                   input_dir, meson.current_build_dir()])
-    endif
+  these_man_pages = []
+  install_dirs = []
+  foreach page, section : man_pages
+    these_man_pages += page
+    install_dirs += section == '' ? false : get_option('mandir') / section
   endforeach
+
+  sphinxmans += custom_target('QEMU man pages',
+                              build_by_default: build_docs,
+                              output: these_man_pages,
+                              input: this_manual,
+                              install: build_docs,
+                              install_dir: install_dirs,
+                              command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
+                                        input_dir, meson.current_build_dir()])
+
   alias_target('sphinxdocs', sphinxdocs)
   alias_target('html', sphinxdocs)
   alias_target('man', sphinxmans)
diff --git a/docs/specs/conf.py b/docs/specs/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/specs/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'specs' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = \
-    u'System Emulation Guest Hardware Specifications'
diff --git a/docs/system/conf.py b/docs/system/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/system/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'system' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = u'System Emulation User''s Guide'
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('qemu-manpage', 'qemu', u'QEMU User Documentation',
-     ['Fabrice Bellard'], 1),
-    ('qemu-block-drivers', 'qemu-block-drivers',
-     u'QEMU block drivers reference',
-     ['Fabrice Bellard and the QEMU Project developers'], 7),
-    ('qemu-cpu-models', 'qemu-cpu-models',
-     u'QEMU CPU Models',
-     ['The QEMU Project developers'], 7)
-]
diff --git a/docs/tools/conf.py b/docs/tools/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/tools/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'tools' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = \
-    u'Tools Guide'
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('qemu-img', 'qemu-img', u'QEMU disk image utility',
-     ['Fabrice Bellard'], 1),
-    ('qemu-storage-daemon', 'qemu-storage-daemon', u'QEMU storage daemon',
-     [], 1),
-    ('qemu-nbd', 'qemu-nbd', u'QEMU Disk Network Block Device Server',
-     ['Anthony Liguori <anthony@codemonkey.ws>'], 8),
-    ('qemu-pr-helper', 'qemu-pr-helper', 'QEMU persistent reservation helper',
-     [], 8),
-    ('qemu-trace-stap', 'qemu-trace-stap', u'QEMU SystemTap trace tool',
-     [], 1),
-    ('virtfs-proxy-helper', 'virtfs-proxy-helper',
-     u'QEMU 9p virtfs proxy filesystem helper',
-     ['M. Mohan Kumar'], 1),
-    ('virtiofsd', 'virtiofsd', u'QEMU virtio-fs shared file system daemon',
-     ['Stefan Hajnoczi <stefanha@redhat.com>',
-      'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
-]
diff --git a/docs/user/conf.py b/docs/user/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/user/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'user' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = u'User Mode Emulation User''s Guide'
-- 
2.20.1

In commit cd8be50e58f63413c0 we converted the A32 coprocessor
insns to decodetree. This accidentally broke XScale/iWMMXt insns,
because it moved the handling of "cp insns which are handled
by looking up the cp register in the hashtable" from after the
call to the legacy disas_xscale_insn() decode to before it,
with the result that all XScale/iWMMXt insns now UNDEF.

Update valid_cp() so that it knows that on XScale cp 0 and 1
are not standard coprocessor instructions; this will cause
the decodetree trans_ functions to ignore them, so that
execution will correctly get through to the legacy decode again.

Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20210108195157.32067-1-peter.maydell@linaro.org
---
 target/arm/translate.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static bool valid_cp(DisasContext *s, int cp)
      * only cp14 and cp15 are valid, and other values aren't considered
      * to be in the coprocessor-instruction space at all. v8M still
      * permits coprocessors 0..7.
+     * For XScale, we must not decode the XScale cp0, cp1 space as
+     * a standard coprocessor insn, because we want to fall through to
+     * the legacy disas_xscale_insn() decoder after decodetree is done.
      */
+    if (arm_dc_feature(s, ARM_FEATURE_XSCALE) && (cp == 0 || cp == 1)) {
+        return false;
+    }
+
     if (arm_dc_feature(s, ARM_FEATURE_V8) &&
         !arm_dc_feature(s, ARM_FEATURE_M)) {
         return cp >= 14;
-- 
2.20.1

The lan9118 code mostly uses symbolic constants for register offsets;
the exceptions are those which the datasheet doesn't give an official
symbolic name to.

Add some names for the registers which don't already have them, based
on the longer names they are given in the memory map.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210108180401.2263-3-peter.maydell@linaro.org
---
 hw/net/lan9118.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/lan9118.c
+++ b/hw/net/lan9118.c
@@ -XXX,XX +XXX,XX @@ do { hw_error("lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
 do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
 #endif
 
+/* The tx and rx fifo ports are a range of aliased 32-bit registers */
+#define RX_DATA_FIFO_PORT_FIRST 0x00
+#define RX_DATA_FIFO_PORT_LAST 0x1f
+#define TX_DATA_FIFO_PORT_FIRST 0x20
+#define TX_DATA_FIFO_PORT_LAST 0x3f
+
+#define RX_STATUS_FIFO_PORT 0x40
+#define RX_STATUS_FIFO_PEEK 0x44
+#define TX_STATUS_FIFO_PORT 0x48
+#define TX_STATUS_FIFO_PEEK 0x4c
+
 #define CSR_ID_REV      0x50
 #define CSR_IRQ_CFG     0x54
 #define CSR_INT_STS     0x58
@@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset,
     offset &= 0xff;
 
     //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
-    if (offset >= 0x20 && offset < 0x40) {
+    if (offset >= TX_DATA_FIFO_PORT_FIRST &&
+        offset <= TX_DATA_FIFO_PORT_LAST) {
         /* TX FIFO */
         tx_fifo_push(s, val);
         return;
@@ -XXX,XX +XXX,XX @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset,
     lan9118_state *s = (lan9118_state *)opaque;
 
     //DPRINTF("Read reg 0x%02x\n", (int)offset);
-    if (offset < 0x20) {
+    if (offset <= RX_DATA_FIFO_PORT_LAST) {
         /* RX FIFO */
         return rx_fifo_pop(s);
     }
     switch (offset) {
-    case 0x40:
+    case RX_STATUS_FIFO_PORT:
         return rx_status_fifo_pop(s);
-    case 0x44:
+    case RX_STATUS_FIFO_PEEK:
         return s->rx_status_fifo[s->rx_status_fifo_head];
-    case 0x48:
+    case TX_STATUS_FIFO_PORT:
         return tx_status_fifo_pop(s);
-    case 0x4c:
+    case TX_STATUS_FIFO_PEEK:
         return s->tx_status_fifo[s->tx_status_fifo_head];
     case CSR_ID_REV:
         return 0x01180001;
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

This patch allows NPCM7XX CLK module to compute clocks that are used by
other NPCM7XX modules.

Add a new struct NPCM7xxClockConverterState which represents a
single converter.  Each clock converter in CLK module represents one
converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter
takes one or more input clocks and converts them into one output clock.
They form a clock hierarchy in the CLK module and are responsible for
outputing clocks for various other modules in an NPCM7XX SoC.

Each converter has a function pointer called "convert" which represents
the unique logic for that converter.

The clock contains two initialization information: ConverterInitInfo and
ConverterConnectionInfo. They represent the vertices and edges in the
clock diagram respectively.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-2-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/misc/npcm7xx_clk.h | 140 +++++-
 hw/misc/npcm7xx_clk.c         | 805 +++++++++++++++++++++++++++++++++-
 2 files changed, 932 insertions(+), 13 deletions(-)

diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/misc/npcm7xx_clk.h
+++ b/include/hw/misc/npcm7xx_clk.h
@@ -XXX,XX +XXX,XX @@
 #define NPCM7XX_CLK_H
 
 #include "exec/memory.h"
+#include "hw/clock.h"
 #include "hw/sysbus.h"
 
 /*
@@ -XXX,XX +XXX,XX @@
 
 #define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in"
 
-typedef struct NPCM7xxCLKState {
+/* Maximum amount of clock inputs in a SEL module. */
+#define NPCM7XX_CLK_SEL_MAX_INPUT 5
+
+/* PLLs in CLK module. */
+typedef enum NPCM7xxClockPLL {
+    NPCM7XX_CLOCK_PLL0,
+    NPCM7XX_CLOCK_PLL1,
+    NPCM7XX_CLOCK_PLL2,
+    NPCM7XX_CLOCK_PLLG,
+    NPCM7XX_CLOCK_NR_PLLS,
+} NPCM7xxClockPLL;
+
+/* SEL/MUX in CLK module. */
+typedef enum NPCM7xxClockSEL {
+    NPCM7XX_CLOCK_PIXCKSEL,
+    NPCM7XX_CLOCK_MCCKSEL,
+    NPCM7XX_CLOCK_CPUCKSEL,
+    NPCM7XX_CLOCK_CLKOUTSEL,
+    NPCM7XX_CLOCK_UARTCKSEL,
+    NPCM7XX_CLOCK_TIMCKSEL,
+    NPCM7XX_CLOCK_SDCKSEL,
+    NPCM7XX_CLOCK_GFXMSEL,
+    NPCM7XX_CLOCK_SUCKSEL,
+    NPCM7XX_CLOCK_NR_SELS,
+} NPCM7xxClockSEL;
+
+/* Dividers in CLK module. */
+typedef enum NPCM7xxClockDivider {
+    NPCM7XX_CLOCK_PLL1D2, /* PLL1/2 */
+    NPCM7XX_CLOCK_PLL2D2, /* PLL2/2 */
+    NPCM7XX_CLOCK_MC_DIVIDER,
+    NPCM7XX_CLOCK_AXI_DIVIDER,
+    NPCM7XX_CLOCK_AHB_DIVIDER,
+    NPCM7XX_CLOCK_AHB3_DIVIDER,
+    NPCM7XX_CLOCK_SPI0_DIVIDER,
+    NPCM7XX_CLOCK_SPIX_DIVIDER,
+    NPCM7XX_CLOCK_APB1_DIVIDER,
+    NPCM7XX_CLOCK_APB2_DIVIDER,
+    NPCM7XX_CLOCK_APB3_DIVIDER,
+    NPCM7XX_CLOCK_APB4_DIVIDER,
+    NPCM7XX_CLOCK_APB5_DIVIDER,
+    NPCM7XX_CLOCK_CLKOUT_DIVIDER,
+    NPCM7XX_CLOCK_UART_DIVIDER,
+    NPCM7XX_CLOCK_TIMER_DIVIDER,
+    NPCM7XX_CLOCK_ADC_DIVIDER,
+    NPCM7XX_CLOCK_MMC_DIVIDER,
+    NPCM7XX_CLOCK_SDHC_DIVIDER,
+    NPCM7XX_CLOCK_GFXM_DIVIDER, /* divide by 3 */
+    NPCM7XX_CLOCK_UTMI_DIVIDER,
+    NPCM7XX_CLOCK_NR_DIVIDERS,
+} NPCM7xxClockConverter;
+
+typedef struct NPCM7xxCLKState NPCM7xxCLKState;
+
+/**
+ * struct NPCM7xxClockPLLState - A PLL module in CLK module.
+ * @name: The name of the module.
+ * @clk: The CLK module that owns this module.
+ * @clock_in: The input clock of this module.
+ * @clock_out: The output clock of this module.
+ * @reg: The control registers for this PLL module.
+ */
+typedef struct NPCM7xxClockPLLState {
+    DeviceState parent;
+
+    const char *name;
+    NPCM7xxCLKState *clk;
+    Clock *clock_in;
+    Clock *clock_out;
+
+    int reg;
+} NPCM7xxClockPLLState;
+
+/**
+ * struct NPCM7xxClockSELState - A SEL module in CLK module.
+ * @name: The name of the module.
+ * @clk: The CLK module that owns this module.
+ * @input_size: The size of inputs of this module.
+ * @clock_in: The input clocks of this module.
+ * @clock_out: The output clocks of this module.
+ * @offset: The offset of this module in the control register.
+ * @len: The length of this module in the control register.
+ */
+typedef struct NPCM7xxClockSELState {
+    DeviceState parent;
+
+    const char *name;
+    NPCM7xxCLKState *clk;
+    uint8_t input_size;
+    Clock *clock_in[NPCM7XX_CLK_SEL_MAX_INPUT];
+    Clock *clock_out;
+
+    int offset;
+    int len;
+} NPCM7xxClockSELState;
+
+/**
+ * struct NPCM7xxClockDividerState - A Divider module in CLK module.
+ * @name: The name of the module.
+ * @clk: The CLK module that owns this module.
+ * @clock_in: The input clock of this module.
+ * @clock_out: The output clock of this module.
+ * @divide: The function the divider uses to divide the input.
+ * @reg: The index of the control register that contains the divisor.
+ * @offset: The offset of the divisor in the control register.
+ * @len: The length of the divisor in the control register.
+ * @divisor: The divisor for a constant divisor
+ */
+typedef struct NPCM7xxClockDividerState {
+    DeviceState parent;
+
+    const char *name;
+    NPCM7xxCLKState *clk;
+    Clock *clock_in;
+    Clock *clock_out;
+
+    uint32_t (*divide)(struct NPCM7xxClockDividerState *s);
+    union {
+        struct {
+            int reg;
+            int offset;
+            int len;
+        };
+        int divisor;
+    };
+} NPCM7xxClockDividerState;
+
+struct NPCM7xxCLKState {
     SysBusDevice parent;
 
     MemoryRegion iomem;
 
+    /* Clock converters */
+    NPCM7xxClockPLLState plls[NPCM7XX_CLOCK_NR_PLLS];
+    NPCM7xxClockSELState sels[NPCM7XX_CLOCK_NR_SELS];
+    NPCM7xxClockDividerState dividers[NPCM7XX_CLOCK_NR_DIVIDERS];
+
     uint32_t regs[NPCM7XX_CLK_NR_REGS];
 
     /* Time reference for SECCNT and CNTR25M, initialized by power on reset */
     int64_t ref_ns;
-} NPCM7xxCLKState;
+
+    /* The incoming reference clock. */
+    Clock *clkref;
+};
 
 #define TYPE_NPCM7XX_CLK "npcm7xx-clk"
 #define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK)
diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/npcm7xx_clk.c
+++ b/hw/misc/npcm7xx_clk.c
@@ -XXX,XX +XXX,XX @@
 
 #include "hw/misc/npcm7xx_clk.h"
 #include "hw/timer/npcm7xx_timer.h"
+#include "hw/qdev-clock.h"
 #include "migration/vmstate.h"
 #include "qemu/error-report.h"
 #include "qemu/log.h"
@@ -XXX,XX +XXX,XX @@
 #include "trace.h"
 #include "sysemu/watchdog.h"
 
+/*
+ * The reference clock hz, and the SECCNT and CNTR25M registers in this module,
+ * is always 25 MHz.
+ */
+#define NPCM7XX_CLOCK_REF_HZ            (25000000)
+
+/* Register Field Definitions */
+#define NPCM7XX_CLK_WDRCR_CA9C  BIT(0) /* Cortex A9 Cores */
+
 #define PLLCON_LOKI     BIT(31)
 #define PLLCON_LOKS     BIT(30)
 #define PLLCON_PWDEN    BIT(12)
+#define PLLCON_FBDV(con) extract32((con), 16, 12)
+#define PLLCON_OTDV2(con) extract32((con), 13, 3)
+#define PLLCON_OTDV1(con) extract32((con), 8, 3)
+#define PLLCON_INDV(con) extract32((con), 0, 6)
 
 enum NPCM7xxCLKRegisters {
     NPCM7XX_CLK_CLKEN1,
@@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = {
     [NPCM7XX_CLK_AHBCKFI]       = 0x000000c8,
 };
 
-/* Register Field Definitions */
-#define NPCM7XX_CLK_WDRCR_CA9C  BIT(0) /* Cortex A9 Cores */
-
 /* The number of watchdogs that can trigger a reset. */
 #define NPCM7XX_NR_WATCHDOGS    (3)
 
+/* Clock converter functions */
+
+#define TYPE_NPCM7XX_CLOCK_PLL "npcm7xx-clock-pll"
+#define NPCM7XX_CLOCK_PLL(obj) OBJECT_CHECK(NPCM7xxClockPLLState, \
+        (obj), TYPE_NPCM7XX_CLOCK_PLL)
+#define TYPE_NPCM7XX_CLOCK_SEL "npcm7xx-clock-sel"
+#define NPCM7XX_CLOCK_SEL(obj) OBJECT_CHECK(NPCM7xxClockSELState, \
+        (obj), TYPE_NPCM7XX_CLOCK_SEL)
+#define TYPE_NPCM7XX_CLOCK_DIVIDER "npcm7xx-clock-divider"
+#define NPCM7XX_CLOCK_DIVIDER(obj) OBJECT_CHECK(NPCM7xxClockDividerState, \
+        (obj), TYPE_NPCM7XX_CLOCK_DIVIDER)
+
+static void npcm7xx_clk_update_pll(void *opaque)
+{
+    NPCM7xxClockPLLState *s = opaque;
+    uint32_t con = s->clk->regs[s->reg];
+    uint64_t freq;
+
+    /* The PLL is grounded if it is not locked yet. */
+    if (con & PLLCON_LOKI) {
+        freq = clock_get_hz(s->clock_in);
+        freq *= PLLCON_FBDV(con);
+        freq /= PLLCON_INDV(con) * PLLCON_OTDV1(con) * PLLCON_OTDV2(con);
+    } else {
+        freq = 0;
+    }
+
+    clock_update_hz(s->clock_out, freq);
+}
+
+static void npcm7xx_clk_update_sel(void *opaque)
+{
+    NPCM7xxClockSELState *s = opaque;
+    uint32_t index = extract32(s->clk->regs[NPCM7XX_CLK_CLKSEL], s->offset,
+            s->len);
+
+    if (index >= s->input_size) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: SEL index: %u out of range\n",
+                      __func__, index);
+        index = 0;
+    }
+    clock_update_hz(s->clock_out, clock_get_hz(s->clock_in[index]));
+}
+
+static void npcm7xx_clk_update_divider(void *opaque)
+{
+    NPCM7xxClockDividerState *s = opaque;
+    uint32_t freq;
+
+    freq = s->divide(s);
+    clock_update_hz(s->clock_out, freq);
+}
+
+static uint32_t divide_by_constant(NPCM7xxClockDividerState *s)
+{
+    return clock_get_hz(s->clock_in) / s->divisor;
+}
+
+static uint32_t divide_by_reg_divisor(NPCM7xxClockDividerState *s)
+{
+    return clock_get_hz(s->clock_in) /
+            (extract32(s->clk->regs[s->reg], s->offset, s->len) + 1);
+}
+
+static uint32_t divide_by_reg_divisor_times_2(NPCM7xxClockDividerState *s)
+{
+    return divide_by_reg_divisor(s) / 2;
+}
+
+static uint32_t shift_by_reg_divisor(NPCM7xxClockDividerState *s)
+{
+    return clock_get_hz(s->clock_in) >>
+        extract32(s->clk->regs[s->reg], s->offset, s->len);
+}
+
+static NPCM7xxClockPLL find_pll_by_reg(enum NPCM7xxCLKRegisters reg)
+{
+    switch (reg) {
+    case NPCM7XX_CLK_PLLCON0:
+        return NPCM7XX_CLOCK_PLL0;
+    case NPCM7XX_CLK_PLLCON1:
+        return NPCM7XX_CLOCK_PLL1;
+    case NPCM7XX_CLK_PLLCON2:
+        return NPCM7XX_CLOCK_PLL2;
+    case NPCM7XX_CLK_PLLCONG:
+        return NPCM7XX_CLOCK_PLLG;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static void npcm7xx_clk_update_all_plls(NPCM7xxCLKState *clk)
+{
+    int i;
+
+    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
+        npcm7xx_clk_update_pll(&clk->plls[i]);
+    }
+}
+
+static void npcm7xx_clk_update_all_sels(NPCM7xxCLKState *clk)
+{
+    int i;
+
+    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
+        npcm7xx_clk_update_sel(&clk->sels[i]);
+    }
+}
+
+static void npcm7xx_clk_update_all_dividers(NPCM7xxCLKState *clk)
+{
+    int i;
+
+    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
+        npcm7xx_clk_update_divider(&clk->dividers[i]);
+    }
+}
+
+static void npcm7xx_clk_update_all_clocks(NPCM7xxCLKState *clk)
+{
+    clock_update_hz(clk->clkref, NPCM7XX_CLOCK_REF_HZ);
+    npcm7xx_clk_update_all_plls(clk);
+    npcm7xx_clk_update_all_sels(clk);
+    npcm7xx_clk_update_all_dividers(clk);
+}
+
+/* Types of clock sources. */
+typedef enum ClockSrcType {
+    CLKSRC_REF,
+    CLKSRC_PLL,
+    CLKSRC_SEL,
+    CLKSRC_DIV,
+} ClockSrcType;
+
+typedef struct PLLInitInfo {
+    const char *name;
+    ClockSrcType src_type;
+    int src_index;
+    int reg;
+    const char *public_name;
+} PLLInitInfo;
+
+typedef struct SELInitInfo {
+    const char *name;
+    uint8_t input_size;
+    ClockSrcType src_type[NPCM7XX_CLK_SEL_MAX_INPUT];
+    int src_index[NPCM7XX_CLK_SEL_MAX_INPUT];
+    int offset;
+    int len;
+    const char *public_name;
+} SELInitInfo;
+
+typedef struct DividerInitInfo {
+    const char *name;
+    ClockSrcType src_type;
+    int src_index;
+    uint32_t (*divide)(NPCM7xxClockDividerState *s);
+    int reg; /* not used when type == CONSTANT */
+    int offset; /* not used when type == CONSTANT */
+    int len; /* not used when type == CONSTANT */
+    int divisor; /* used only when type == CONSTANT */
+    const char *public_name;
+} DividerInitInfo;
+
+static const PLLInitInfo pll_init_info_list[] = {
+    [NPCM7XX_CLOCK_PLL0] = {
+        .name = "pll0",
+        .src_type = CLKSRC_REF,
+        .reg = NPCM7XX_CLK_PLLCON0,
+    },
+    [NPCM7XX_CLOCK_PLL1] = {
+        .name = "pll1",
+        .src_type = CLKSRC_REF,
+        .reg = NPCM7XX_CLK_PLLCON1,
+    },
+    [NPCM7XX_CLOCK_PLL2] = {
+        .name = "pll2",
+        .src_type = CLKSRC_REF,
+        .reg = NPCM7XX_CLK_PLLCON2,
+    },
+    [NPCM7XX_CLOCK_PLLG] = {
+        .name = "pllg",
+        .src_type = CLKSRC_REF,
+        .reg = NPCM7XX_CLK_PLLCONG,
+    },
+};
+
+static const SELInitInfo sel_init_info_list[] = {
+    [NPCM7XX_CLOCK_PIXCKSEL] = {
+        .name = "pixcksel",
+        .input_size = 2,
+        .src_type = {CLKSRC_PLL, CLKSRC_REF},
+        .src_index = {NPCM7XX_CLOCK_PLLG, 0},
+        .offset = 5,
+        .len = 1,
+        .public_name = "pixel-clock",
+    },
+    [NPCM7XX_CLOCK_MCCKSEL] = {
+        .name = "mccksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_DIV, CLKSRC_REF, CLKSRC_REF,
+            /*MCBPCK, shouldn't be used in normal operation*/
+            CLKSRC_REF},
+        .src_index = {NPCM7XX_CLOCK_PLL1D2, 0, 0, 0},
+        .offset = 12,
+        .len = 2,
+        .public_name = "mc-phy-clock",
+    },
+    [NPCM7XX_CLOCK_CPUCKSEL] = {
+        .name = "cpucksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF,
+            /*SYSBPCK, shouldn't be used in normal operation*/
+            CLKSRC_REF},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, 0},
+        .offset = 0,
+        .len = 2,
+        .public_name = "system-clock",
+    },
+    [NPCM7XX_CLOCK_CLKOUTSEL] = {
+        .name = "clkoutsel",
+        .input_size = 5,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF,
+            CLKSRC_PLL, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLLG, NPCM7XX_CLOCK_PLL2D2},
+        .offset = 18,
+        .len = 3,
+        .public_name = "tock",
+    },
+    [NPCM7XX_CLOCK_UARTCKSEL] = {
+        .name = "uartcksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLL2D2},
+        .offset = 8,
+        .len = 2,
+    },
+    [NPCM7XX_CLOCK_TIMCKSEL] = {
+        .name = "timcksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLL2D2},
+        .offset = 14,
+        .len = 2,
+    },
+    [NPCM7XX_CLOCK_SDCKSEL] = {
+        .name = "sdcksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLL2D2},
+        .offset = 6,
+        .len = 2,
+    },
+    [NPCM7XX_CLOCK_GFXMSEL] = {
+        .name = "gfxmksel",
+        .input_size = 2,
+        .src_type = {CLKSRC_REF, CLKSRC_PLL},
+        .src_index = {0, NPCM7XX_CLOCK_PLL2},
+        .offset = 21,
+        .len = 1,
+    },
+    [NPCM7XX_CLOCK_SUCKSEL] = {
+        .name = "sucksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLL2D2},
+        .offset = 10,
+        .len = 2,
+    },
+};
+
+static const DividerInitInfo divider_init_info_list[] = {
+    [NPCM7XX_CLOCK_PLL1D2] = {
+        .name = "pll1d2",
+        .src_type = CLKSRC_PLL,
+        .src_index = NPCM7XX_CLOCK_PLL1,
+        .divide = divide_by_constant,
+        .divisor = 2,
+    },
+    [NPCM7XX_CLOCK_PLL2D2] = {
+        .name = "pll2d2",
+        .src_type = CLKSRC_PLL,
+        .src_index = NPCM7XX_CLOCK_PLL2,
+        .divide = divide_by_constant,
+        .divisor = 2,
+    },
+    [NPCM7XX_CLOCK_MC_DIVIDER] = {
+        .name = "mc-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_MCCKSEL,
+        .divide = divide_by_constant,
+        .divisor = 2,
+        .public_name = "mc-clock"
+    },
+    [NPCM7XX_CLOCK_AXI_DIVIDER] = {
+        .name = "axi-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_CPUCKSEL,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 0,
+        .len = 1,
+        .public_name = "clk2"
+    },
+    [NPCM7XX_CLOCK_AHB_DIVIDER] = {
+        .name = "ahb-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AXI_DIVIDER,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 26,
+        .len = 2,
+        .public_name = "clk4"
+    },
+    [NPCM7XX_CLOCK_AHB3_DIVIDER] = {
+        .name = "ahb3-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 6,
+        .len = 5,
+        .public_name = "ahb3-spi3-clock"
+    },
+    [NPCM7XX_CLOCK_SPI0_DIVIDER] = {
+        .name = "spi0-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV3,
+        .offset = 6,
+        .len = 5,
+        .public_name = "spi0-clock",
+    },
+    [NPCM7XX_CLOCK_SPIX_DIVIDER] = {
+        .name = "spix-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV3,
+        .offset = 1,
+        .len = 5,
+        .public_name = "spix-clock",
+    },
+    [NPCM7XX_CLOCK_APB1_DIVIDER] = {
+        .name = "apb1-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 24,
+        .len = 2,
+        .public_name = "apb1-clock",
+    },
+    [NPCM7XX_CLOCK_APB2_DIVIDER] = {
+        .name = "apb2-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 26,
+        .len = 2,
+        .public_name = "apb2-clock",
+    },
+    [NPCM7XX_CLOCK_APB3_DIVIDER] = {
+        .name = "apb3-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 28,
+        .len = 2,
+        .public_name = "apb3-clock",
+    },
+    [NPCM7XX_CLOCK_APB4_DIVIDER] = {
+        .name = "apb4-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 30,
+        .len = 2,
+        .public_name = "apb4-clock",
+    },
+    [NPCM7XX_CLOCK_APB5_DIVIDER] = {
+        .name = "apb5-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 22,
+        .len = 2,
+        .public_name = "apb5-clock",
+    },
+    [NPCM7XX_CLOCK_CLKOUT_DIVIDER] = {
+        .name = "clkout-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_CLKOUTSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 16,
+        .len = 5,
+        .public_name = "clkout",
+    },
+    [NPCM7XX_CLOCK_UART_DIVIDER] = {
+        .name = "uart-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_UARTCKSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 16,
+        .len = 5,
+        .public_name = "uart-clock",
+    },
+    [NPCM7XX_CLOCK_TIMER_DIVIDER] = {
+        .name = "timer-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_TIMCKSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 21,
+        .len = 5,
+        .public_name = "timer-clock",
+    },
+    [NPCM7XX_CLOCK_ADC_DIVIDER] = {
+        .name = "adc-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_TIMER_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 28,
+        .len = 3,
+        .public_name = "adc-clock",
+    },
+    [NPCM7XX_CLOCK_MMC_DIVIDER] = {
+        .name = "mmc-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_SDCKSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 11,
+        .len = 5,
+        .public_name = "mmc-clock",
+    },
+    [NPCM7XX_CLOCK_SDHC_DIVIDER] = {
+        .name = "sdhc-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_SDCKSEL,
+        .divide = divide_by_reg_divisor_times_2,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 0,
+        .len = 4,
+        .public_name = "sdhc-clock",
+    },
+    [NPCM7XX_CLOCK_GFXM_DIVIDER] = {
+        .name = "gfxm-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_GFXMSEL,
+        .divide = divide_by_constant,
+        .divisor = 3,
+        .public_name = "gfxm-clock",
+    },
+    [NPCM7XX_CLOCK_UTMI_DIVIDER] = {
+        .name = "utmi-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_SUCKSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 8,
+        .len = 5,
+        .public_name = "utmi-clock",
+    },
+};
+
+static void npcm7xx_clk_pll_init(Object *obj)
+{
+    NPCM7xxClockPLLState *pll = NPCM7XX_CLOCK_PLL(obj);
+
+    pll->clock_in = qdev_init_clock_in(DEVICE(pll), "clock-in",
+            npcm7xx_clk_update_pll, pll);
+    pll->clock_out = qdev_init_clock_out(DEVICE(pll), "clock-out");
+}
+
+static void npcm7xx_clk_sel_init(Object *obj)
+{
+    int i;
+    NPCM7xxClockSELState *sel = NPCM7XX_CLOCK_SEL(obj);
+
+    for (i = 0; i < NPCM7XX_CLK_SEL_MAX_INPUT; ++i) {
+        sel->clock_in[i] = qdev_init_clock_in(DEVICE(sel),
+                g_strdup_printf("clock-in[%d]", i),
+                npcm7xx_clk_update_sel, sel);
+    }
+    sel->clock_out = qdev_init_clock_out(DEVICE(sel), "clock-out");
+}
+static void npcm7xx_clk_divider_init(Object *obj)
+{
+    NPCM7xxClockDividerState *div = NPCM7XX_CLOCK_DIVIDER(obj);
+
+    div->clock_in = qdev_init_clock_in(DEVICE(div), "clock-in",
+            npcm7xx_clk_update_divider, div);
+    div->clock_out = qdev_init_clock_out(DEVICE(div), "clock-out");
+}
+
+static void npcm7xx_init_clock_pll(NPCM7xxClockPLLState *pll,
+        NPCM7xxCLKState *clk, const PLLInitInfo *init_info)
+{
+    pll->name = init_info->name;
+    pll->clk = clk;
+    pll->reg = init_info->reg;
+    if (init_info->public_name != NULL) {
+        qdev_alias_clock(DEVICE(pll), "clock-out", DEVICE(clk),
+                init_info->public_name);
+    }
+}
+
+static void npcm7xx_init_clock_sel(NPCM7xxClockSELState *sel,
+        NPCM7xxCLKState *clk, const SELInitInfo *init_info)
+{
+    int input_size = init_info->input_size;
+
+    sel->name = init_info->name;
+    sel->clk = clk;
+    sel->input_size = init_info->input_size;
+    g_assert(input_size <= NPCM7XX_CLK_SEL_MAX_INPUT);
+    sel->offset = init_info->offset;
+    sel->len = init_info->len;
+    if (init_info->public_name != NULL) {
+        qdev_alias_clock(DEVICE(sel), "clock-out", DEVICE(clk),
+                init_info->public_name);
+    }
+}
+
+static void npcm7xx_init_clock_divider(NPCM7xxClockDividerState *div,
+        NPCM7xxCLKState *clk, const DividerInitInfo *init_info)
+{
+    div->name = init_info->name;
+    div->clk = clk;
+
+    div->divide = init_info->divide;
+    if (div->divide == divide_by_constant) {
+        div->divisor = init_info->divisor;
+    } else {
+        div->reg = init_info->reg;
+        div->offset = init_info->offset;
+        div->len = init_info->len;
+    }
+    if (init_info->public_name != NULL) {
+        qdev_alias_clock(DEVICE(div), "clock-out", DEVICE(clk),
+                init_info->public_name);
+    }
+}
+
+static Clock *npcm7xx_get_clock(NPCM7xxCLKState *clk, ClockSrcType type,
+        int index)
+{
+    switch (type) {
+    case CLKSRC_REF:
+        return clk->clkref;
+    case CLKSRC_PLL:
+        return clk->plls[index].clock_out;
+    case CLKSRC_SEL:
+        return clk->sels[index].clock_out;
+    case CLKSRC_DIV:
+        return clk->dividers[index].clock_out;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static void npcm7xx_connect_clocks(NPCM7xxCLKState *clk)
+{
+    int i, j;
+    Clock *src;
+
+    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
+        src = npcm7xx_get_clock(clk, pll_init_info_list[i].src_type,
+                pll_init_info_list[i].src_index);
+        clock_set_source(clk->plls[i].clock_in, src);
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
+        for (j = 0; j < sel_init_info_list[i].input_size; ++j) {
+            src = npcm7xx_get_clock(clk, sel_init_info_list[i].src_type[j],
+                    sel_init_info_list[i].src_index[j]);
+            clock_set_source(clk->sels[i].clock_in[j], src);
+        }
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
+        src = npcm7xx_get_clock(clk, divider_init_info_list[i].src_type,
+                divider_init_info_list[i].src_index);
+        clock_set_source(clk->dividers[i].clock_in, src);
+    }
+}
+
 static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
 {
     uint32_t reg = offset / sizeof(uint32_t);
@@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
          *
          * The 4 LSBs are always zero: (1e9 / 640) << 4 = 25000000.
          */
-        value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_TIMER_REF_HZ;
+        value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_CLOCK_REF_HZ;
         break;
 
     default:
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset,
                 value |= (value & PLLCON_LOKS);
             }
         }
+        /* Only update PLL when it is locked. */
+        if (value & PLLCON_LOKI) {
+            npcm7xx_clk_update_pll(&s->plls[find_pll_by_reg(reg)]);
+        }
+        break;
+
+    case NPCM7XX_CLK_CLKSEL:
+        npcm7xx_clk_update_all_sels(s);
+        break;
+
+    case NPCM7XX_CLK_CLKDIV1:
+    case NPCM7XX_CLK_CLKDIV2:
+    case NPCM7XX_CLK_CLKDIV3:
+        npcm7xx_clk_update_all_dividers(s);
         break;
 
     case NPCM7XX_CLK_CNTR25M:
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
     case RESET_TYPE_COLD:
         memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values));
         s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+        npcm7xx_clk_update_all_clocks(s);
         return;
     }
 
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
                   __func__, type);
 }
 
+static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s)
+{
+    int i;
+
+    s->clkref = qdev_init_clock_in(DEVICE(s), "clkref", NULL, NULL);
+
+    /* First pass: init all converter modules */
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(pll_init_info_list) != NPCM7XX_CLOCK_NR_PLLS);
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(sel_init_info_list) != NPCM7XX_CLOCK_NR_SELS);
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(divider_init_info_list)
+            != NPCM7XX_CLOCK_NR_DIVIDERS);
+    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
+        object_initialize_child(OBJECT(s), pll_init_info_list[i].name,
+                &s->plls[i], TYPE_NPCM7XX_CLOCK_PLL);
+        npcm7xx_init_clock_pll(&s->plls[i], s,
+                &pll_init_info_list[i]);
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
+        object_initialize_child(OBJECT(s), sel_init_info_list[i].name,
+                &s->sels[i], TYPE_NPCM7XX_CLOCK_SEL);
+        npcm7xx_init_clock_sel(&s->sels[i], s,
+                &sel_init_info_list[i]);
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
+        object_initialize_child(OBJECT(s), divider_init_info_list[i].name,
+                &s->dividers[i], TYPE_NPCM7XX_CLOCK_DIVIDER);
+        npcm7xx_init_clock_divider(&s->dividers[i], s,
+                &divider_init_info_list[i]);
+    }
+
+    /* Second pass: connect converter modules */
+    npcm7xx_connect_clocks(s);
+
+    clock_update_hz(s->clkref, NPCM7XX_CLOCK_REF_HZ);
+}
+
 static void npcm7xx_clk_init(Object *obj)
 {
     NPCM7xxCLKState *s = NPCM7XX_CLK(obj);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj)
     memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
                           TYPE_NPCM7XX_CLK, 4 * KiB);
     sysbus_init_mmio(&s->parent, &s->iomem);
-    qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
-            NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
 }
 
-static const VMStateDescription vmstate_npcm7xx_clk = {
-    .name = "npcm7xx-clk",
+static int npcm7xx_clk_post_load(void *opaque, int version_id)
+{
+    if (version_id >= 1) {
+        NPCM7xxCLKState *clk = opaque;
+
+        npcm7xx_clk_update_all_clocks(clk);
+    }
+
+    return 0;
+}
+
+static void npcm7xx_clk_realize(DeviceState *dev, Error **errp)
+{
+    int i;
+    NPCM7xxCLKState *s = NPCM7XX_CLK(dev);
+
+    qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
+            NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
+    npcm7xx_clk_init_clock_hierarchy(s);
+
+    /* Realize child devices */
+    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
+        if (!qdev_realize(DEVICE(&s->plls[i]), NULL, errp)) {
+            return;
+        }
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
+        if (!qdev_realize(DEVICE(&s->sels[i]), NULL, errp)) {
+            return;
+        }
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
+        if (!qdev_realize(DEVICE(&s->dividers[i]), NULL, errp)) {
+            return;
+        }
+    }
+}
+
+static const VMStateDescription vmstate_npcm7xx_clk_pll = {
+    .name = "npcm7xx-clock-pll",
     .version_id = 0,
     .minimum_version_id = 0,
-    .fields = (VMStateField[]) {
-        VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
-        VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
+    .fields =  (VMStateField[]) {
+        VMSTATE_CLOCK(clock_in, NPCM7xxClockPLLState),
         VMSTATE_END_OF_LIST(),
     },
 };
 
+static const VMStateDescription vmstate_npcm7xx_clk_sel = {
+    .name = "npcm7xx-clock-sel",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields =  (VMStateField[]) {
+        VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(clock_in, NPCM7xxClockSELState,
+                NPCM7XX_CLK_SEL_MAX_INPUT, 0, vmstate_clock, Clock),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static const VMStateDescription vmstate_npcm7xx_clk_divider = {
+    .name = "npcm7xx-clock-divider",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields =  (VMStateField[]) {
+        VMSTATE_CLOCK(clock_in, NPCM7xxClockDividerState),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static const VMStateDescription vmstate_npcm7xx_clk = {
+    .name = "npcm7xx-clk",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = npcm7xx_clk_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
+        VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
+        VMSTATE_CLOCK(clkref, NPCM7xxCLKState),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static void npcm7xx_clk_pll_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx Clock PLL Module";
+    dc->vmsd = &vmstate_npcm7xx_clk_pll;
+}
+
+static void npcm7xx_clk_sel_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx Clock SEL Module";
+    dc->vmsd = &vmstate_npcm7xx_clk_sel;
+}
+
+static void npcm7xx_clk_divider_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx Clock Divider Module";
+    dc->vmsd = &vmstate_npcm7xx_clk_divider;
+}
+
 static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
 {
     ResettableClass *rc = RESETTABLE_CLASS(klass);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
 
     dc->desc = "NPCM7xx Clock Control Registers";
     dc->vmsd = &vmstate_npcm7xx_clk;
+    dc->realize = npcm7xx_clk_realize;
     rc->phases.enter = npcm7xx_clk_enter_reset;
 }
 
+static const TypeInfo npcm7xx_clk_pll_info = {
+    .name               = TYPE_NPCM7XX_CLOCK_PLL,
+    .parent             = TYPE_DEVICE,
+    .instance_size      = sizeof(NPCM7xxClockPLLState),
+    .instance_init      = npcm7xx_clk_pll_init,
+    .class_init         = npcm7xx_clk_pll_class_init,
+};
+
+static const TypeInfo npcm7xx_clk_sel_info = {
+    .name               = TYPE_NPCM7XX_CLOCK_SEL,
+    .parent             = TYPE_DEVICE,
+    .instance_size      = sizeof(NPCM7xxClockSELState),
+    .instance_init      = npcm7xx_clk_sel_init,
+    .class_init         = npcm7xx_clk_sel_class_init,
+};
+
+static const TypeInfo npcm7xx_clk_divider_info = {
+    .name               = TYPE_NPCM7XX_CLOCK_DIVIDER,
+    .parent             = TYPE_DEVICE,
+    .instance_size      = sizeof(NPCM7xxClockDividerState),
+    .instance_init      = npcm7xx_clk_divider_init,
+    .class_init         = npcm7xx_clk_divider_class_init,
+};
+
 static const TypeInfo npcm7xx_clk_info = {
     .name               = TYPE_NPCM7XX_CLK,
     .parent             = TYPE_SYS_BUS_DEVICE,
@@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_clk_info = {
 
 static void npcm7xx_clk_register_type(void)
 {
+    type_register_static(&npcm7xx_clk_pll_info);
+    type_register_static(&npcm7xx_clk_sel_info);
+    type_register_static(&npcm7xx_clk_divider_info);
     type_register_static(&npcm7xx_clk_info);
 }
 type_init(npcm7xx_clk_register_type);
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

This patch makes NPCM7XX Timer to use a the timer clock generated by the
CLK module instead of the magic number TIMER_REF_HZ.

diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/misc/npcm7xx_clk.h
+++ b/include/hw/misc/npcm7xx_clk.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/clock.h"
 #include "hw/sysbus.h"
 
-/*
- * The reference clock frequency for the timer modules, and the SECCNT and
- * CNTR25M registers in this module, is always 25 MHz.
- */
-#define NPCM7XX_TIMER_REF_HZ            (25000000)
-
 /*
  * Number of registers in our device state structure. Don't change this without
  * incrementing the version_id in the vmstate.
diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/npcm7xx_timer.h
+++ b/include/hw/timer/npcm7xx_timer.h
@@ -XXX,XX +XXX,XX @@ struct NPCM7xxTimerCtrlState {
 
     uint32_t    tisr;
 
+    Clock       *clock;
     NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL];
     NPCM7xxWatchdogTimer watchdog_timer;
 };
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/char/serial.h"
 #include "hw/loader.h"
 #include "hw/misc/unimp.h"
+#include "hw/qdev-clock.h"
 #include "hw/qdev-properties.h"
 #include "qapi/error.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
         int first_irq;
         int j;
 
+        /* Connect the timer clock. */
+        qdev_connect_clock_in(DEVICE(&s->tim[i]), "clock", qdev_get_clock_out(
+                    DEVICE(&s->clk), "timer-clock"));
+
         sysbus_realize(sbd, &error_abort);
         sysbus_mmio_map(sbd, 0, npcm7xx_tim_addr[i]);
 
diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/npcm7xx_timer.c
+++ b/hw/timer/npcm7xx_timer.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/osdep.h"
 
 #include "hw/irq.h"
+#include "hw/qdev-clock.h"
 #include "hw/qdev-properties.h"
-#include "hw/misc/npcm7xx_clk.h"
 #include "hw/timer/npcm7xx_timer.h"
 #include "migration/vmstate.h"
 #include "qemu/bitops.h"
@@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_tcsr_prescaler(uint32_t tcsr)
 /* Convert a timer cycle count to a time interval in nanoseconds. */
 static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count)
 {
-    int64_t ns = count;
+    int64_t ticks = count;
 
-    ns *= NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ;
-    ns *= npcm7xx_tcsr_prescaler(t->tcsr);
+    ticks *= npcm7xx_tcsr_prescaler(t->tcsr);
 
-    return ns;
+    return clock_ticks_to_ns(t->ctrl->clock, ticks);
 }
 
 /* Convert a time interval in nanoseconds to a timer cycle count. */
 static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns)
 {
-    int64_t count;
-
-    count = ns / (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ);
-    count /= npcm7xx_tcsr_prescaler(t->tcsr);
-
-    return count;
+    return ns / clock_ticks_to_ns(t->ctrl->clock,
+                                  npcm7xx_tcsr_prescaler(t->tcsr));
 }
 
 static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t)
@@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t)
 static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t,
         int64_t cycles)
 {
-    uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t);
-    int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles;
+    int64_t ticks = cycles * npcm7xx_watchdog_timer_prescaler(t);
+    int64_t ns = clock_ticks_to_ns(t->ctrl->clock, ticks);
 
     /*
      * The reset function always clears the current timer. The caller of the
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t,
      */
     npcm7xx_timer_clear(&t->base_timer);
 
-    ns *= prescaler;
     t->base_timer.remaining_ns = ns;
 }
 
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_hold_reset(Object *obj)
     qemu_irq_lower(s->watchdog_timer.irq);
 }
 
-static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
+static void npcm7xx_timer_init(Object *obj)
 {
-    NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev);
-    SysBusDevice *sbd = &s->parent;
+    NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
+    DeviceState *dev = DEVICE(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
     int i;
     NPCM7xxWatchdogTimer *w;
 
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
             npcm7xx_watchdog_timer_expired, w);
     sysbus_init_irq(sbd, &w->irq);
 
-    memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s,
+    memory_region_init_io(&s->iomem, obj, &npcm7xx_timer_ops, s,
                           TYPE_NPCM7XX_TIMER, 4 * KiB);
     sysbus_init_mmio(sbd, &s->iomem);
     qdev_init_gpio_out_named(dev, &w->reset_signal,
             NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1);
+    s->clock = qdev_init_clock_in(dev, "clock", NULL, NULL);
 }
 
 static const VMStateDescription vmstate_npcm7xx_base_timer = {
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_watchdog_timer = {
 
 static const VMStateDescription vmstate_npcm7xx_timer_ctrl = {
     .name = "npcm7xx-timer-ctrl",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState),
+        VMSTATE_CLOCK(clock, NPCM7xxTimerCtrlState),
         VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState,
                              NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer,
                              NPCM7xxTimer),
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_class_init(ObjectClass *klass, void *data)
     QEMU_BUILD_BUG_ON(NPCM7XX_TIMER_REGS_END > NPCM7XX_TIMER_NR_REGS);
 
     dc->desc = "NPCM7xx Timer Controller";
-    dc->realize = npcm7xx_timer_realize;
     dc->vmsd = &vmstate_npcm7xx_timer_ctrl;
     rc->phases.enter = npcm7xx_timer_enter_reset;
     rc->phases.hold = npcm7xx_timer_hold_reset;
@@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_timer_info = {
     .parent             = TYPE_SYS_BUS_DEVICE,
     .instance_size      = sizeof(NPCM7xxTimerCtrlState),
     .class_init         = npcm7xx_timer_class_init,
+    .instance_init      = npcm7xx_timer_init,
 };
 
 static void npcm7xx_timer_register_type(void)
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.

Users can alter input value by using qom-set QMP command.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/nuvoton.rst    |   2 +-
 meson.build                    |   1 +
 hw/adc/trace.h                 |   1 +
 include/hw/adc/npcm7xx_adc.h   |  69 ++++++
 include/hw/arm/npcm7xx.h       |   2 +
 hw/adc/npcm7xx_adc.c           | 301 ++++++++++++++++++++++++++
 hw/arm/npcm7xx.c               |  24 ++-
 tests/qtest/npcm7xx_adc-test.c | 377 +++++++++++++++++++++++++++++++++
 hw/adc/meson.build             |   1 +
 hw/adc/trace-events            |   5 +
 tests/qtest/meson.build        |   3 +-
 11 files changed, 783 insertions(+), 3 deletions(-)
 create mode 100644 hw/adc/trace.h
 create mode 100644 include/hw/adc/npcm7xx_adc.h
 create mode 100644 hw/adc/npcm7xx_adc.c
 create mode 100644 tests/qtest/npcm7xx_adc-test.c
 create mode 100644 hw/adc/trace-events

diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/nuvoton.rst
+++ b/docs/system/arm/nuvoton.rst
@@ -XXX,XX +XXX,XX @@ Supported devices
  * Random Number Generator (RNG)
  * USB host (USBH)
  * GPIO controller
+ * Analog to Digital Converter (ADC)
 
 Missing devices
 ---------------
@@ -XXX,XX +XXX,XX @@ Missing devices
  * USB device (USBD)
  * SMBus controller (SMBF)
  * Peripheral SPI controller (PSPI)
- * Analog to Digital Converter (ADC)
  * SD/MMC host
  * PECI interface
  * Pulse Width Modulation (PWM)
diff --git a/meson.build b/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/meson.build
+++ b/meson.build
@@ -XXX,XX +XXX,XX @@ if have_system
     'chardev',
     'hw/9pfs',
     'hw/acpi',
+    'hw/adc',
     'hw/alpha',
     'hw/arm',
     'hw/audio',
diff --git a/hw/adc/trace.h b/hw/adc/trace.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/adc/trace.h
@@ -0,0 +1 @@
+#include "trace/trace-hw_adc.h"
diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/adc/npcm7xx_adc.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nuvoton NPCM7xx ADC Module
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_ADC_H
+#define NPCM7XX_ADC_H
+
+#include "hw/clock.h"
+#include "hw/irq.h"
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+
+#define NPCM7XX_ADC_NUM_INPUTS      8
+/**
+ * This value should not be changed unless write_adc_calibration function in
+ * hw/arm/npcm7xx.c is also changed.
+ */
+#define NPCM7XX_ADC_NUM_CALIB       2
+
+/**
+ * struct NPCM7xxADCState - Analog to Digital Converter Module device state.
+ * @parent: System bus device.
+ * @iomem: Memory region through which registers are accessed.
+ * @conv_timer: The timer counts down remaining cycles for the conversion.
+ * @irq: GIC interrupt line to fire on expiration (if enabled).
+ * @con: The Control Register.
+ * @data: The Data Buffer.
+ * @clock: The ADC Clock.
+ * @adci: The input voltage in units of uV. 1uv = 1e-6V.
+ * @vref: The external reference voltage.
+ * @iref: The internal reference voltage, initialized at launch time.
+ * @rv: The calibrated output values of 0.5V and 1.5V for the ADC.
+ */
+typedef struct {
+    SysBusDevice parent;
+
+    MemoryRegion iomem;
+
+    QEMUTimer    conv_timer;
+
+    qemu_irq     irq;
+    uint32_t     con;
+    uint32_t     data;
+    Clock       *clock;
+
+    /* Voltages are in unit of uV. 1V = 1000000uV. */
+    uint32_t     adci[NPCM7XX_ADC_NUM_INPUTS];
+    uint32_t     vref;
+    uint32_t     iref;
+
+    uint16_t     calibration_r_values[NPCM7XX_ADC_NUM_CALIB];
+} NPCM7xxADCState;
+
+#define TYPE_NPCM7XX_ADC "npcm7xx-adc"
+#define NPCM7XX_ADC(obj) \
+    OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC)
+
+#endif /* NPCM7XX_ADC_H */
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -XXX,XX +XXX,XX @@
 #define NPCM7XX_H
 
 #include "hw/boards.h"
+#include "hw/adc/npcm7xx_adc.h"
 #include "hw/cpu/a9mpcore.h"
 #include "hw/gpio/npcm7xx_gpio.h"
 #include "hw/mem/npcm7xx_mc.h"
@@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState {
     NPCM7xxGCRState     gcr;
     NPCM7xxCLKState     clk;
     NPCM7xxTimerCtrlState tim[3];
+    NPCM7xxADCState     adc;
     NPCM7xxOTPState     key_storage;
     NPCM7xxOTPState     fuse_array;
     NPCM7xxMCState      mc;
diff --git a/hw/adc/npcm7xx_adc.c b/hw/adc/npcm7xx_adc.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/adc/npcm7xx_adc.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nuvoton NPCM7xx ADC Module
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/adc/npcm7xx_adc.h"
+#include "hw/qdev-clock.h"
+#include "hw/qdev-properties.h"
+#include "hw/registerfields.h"
+#include "migration/vmstate.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/timer.h"
+#include "qemu/units.h"
+#include "trace.h"
+
+REG32(NPCM7XX_ADC_CON, 0x0)
+REG32(NPCM7XX_ADC_DATA, 0x4)
+
+/* Register field definitions. */
+#define NPCM7XX_ADC_CON_MUX(rv) extract32(rv, 24, 4)
+#define NPCM7XX_ADC_CON_INT_EN  BIT(21)
+#define NPCM7XX_ADC_CON_REFSEL  BIT(19)
+#define NPCM7XX_ADC_CON_INT     BIT(18)
+#define NPCM7XX_ADC_CON_EN      BIT(17)
+#define NPCM7XX_ADC_CON_RST     BIT(16)
+#define NPCM7XX_ADC_CON_CONV    BIT(14)
+#define NPCM7XX_ADC_CON_DIV(rv) extract32(rv, 1, 8)
+
+#define NPCM7XX_ADC_MAX_RESULT      1023
+#define NPCM7XX_ADC_DEFAULT_IREF    2000000
+#define NPCM7XX_ADC_CONV_CYCLES     20
+#define NPCM7XX_ADC_RESET_CYCLES    10
+#define NPCM7XX_ADC_R0_INPUT        500000
+#define NPCM7XX_ADC_R1_INPUT        1500000
+
+static void npcm7xx_adc_reset(NPCM7xxADCState *s)
+{
+    timer_del(&s->conv_timer);
+    s->con = 0x000c0001;
+    s->data = 0x00000000;
+}
+
+static uint32_t npcm7xx_adc_convert(uint32_t input, uint32_t ref)
+{
+    uint32_t result;
+
+    result = input * (NPCM7XX_ADC_MAX_RESULT + 1) / ref;
+    if (result > NPCM7XX_ADC_MAX_RESULT) {
+        result = NPCM7XX_ADC_MAX_RESULT;
+    }
+
+    return result;
+}
+
+static uint32_t npcm7xx_adc_prescaler(NPCM7xxADCState *s)
+{
+    return 2 * (NPCM7XX_ADC_CON_DIV(s->con) + 1);
+}
+
+static void npcm7xx_adc_start_timer(Clock *clk, QEMUTimer *timer,
+        uint32_t cycles, uint32_t prescaler)
+{
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    int64_t ticks = cycles;
+    int64_t ns;
+
+    ticks *= prescaler;
+    ns = clock_ticks_to_ns(clk, ticks);
+    ns += now;
+    timer_mod(timer, ns);
+}
+
+static void npcm7xx_adc_start_convert(NPCM7xxADCState *s)
+{
+    uint32_t prescaler = npcm7xx_adc_prescaler(s);
+
+    npcm7xx_adc_start_timer(s->clock, &s->conv_timer, NPCM7XX_ADC_CONV_CYCLES,
+            prescaler);
+}
+
+static void npcm7xx_adc_convert_done(void *opaque)
+{
+    NPCM7xxADCState *s = opaque;
+    uint32_t input = NPCM7XX_ADC_CON_MUX(s->con);
+    uint32_t ref = (s->con & NPCM7XX_ADC_CON_REFSEL)
+        ? s->iref : s->vref;
+
+    if (input >= NPCM7XX_ADC_NUM_INPUTS) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid input: %u\n",
+                      __func__, input);
+        return;
+    }
+    s->data = npcm7xx_adc_convert(s->adci[input], ref);
+    if (s->con & NPCM7XX_ADC_CON_INT_EN) {
+        s->con |= NPCM7XX_ADC_CON_INT;
+        qemu_irq_raise(s->irq);
+    }
+    s->con &= ~NPCM7XX_ADC_CON_CONV;
+}
+
+static void npcm7xx_adc_calibrate(NPCM7xxADCState *adc)
+{
+    adc->calibration_r_values[0] = npcm7xx_adc_convert(NPCM7XX_ADC_R0_INPUT,
+            adc->iref);
+    adc->calibration_r_values[1] = npcm7xx_adc_convert(NPCM7XX_ADC_R1_INPUT,
+            adc->iref);
+}
+
+static void npcm7xx_adc_write_con(NPCM7xxADCState *s, uint32_t new_con)
+{
+    uint32_t old_con = s->con;
+
+    /* Write ADC_INT to 1 to clear it */
+    if (new_con & NPCM7XX_ADC_CON_INT) {
+        new_con &= ~NPCM7XX_ADC_CON_INT;
+        qemu_irq_lower(s->irq);
+    } else if (old_con & NPCM7XX_ADC_CON_INT) {
+        new_con |= NPCM7XX_ADC_CON_INT;
+    }
+
+    s->con = new_con;
+
+    if (s->con & NPCM7XX_ADC_CON_RST) {
+        npcm7xx_adc_reset(s);
+        return;
+    }
+
+    if ((s->con & NPCM7XX_ADC_CON_EN)) {
+        if (s->con & NPCM7XX_ADC_CON_CONV) {
+            if (!(old_con & NPCM7XX_ADC_CON_CONV)) {
+                npcm7xx_adc_start_convert(s);
+            }
+        } else {
+            timer_del(&s->conv_timer);
+        }
+    }
+}
+
+static uint64_t npcm7xx_adc_read(void *opaque, hwaddr offset, unsigned size)
+{
+    uint64_t value = 0;
+    NPCM7xxADCState *s = opaque;
+
+    switch (offset) {
+    case A_NPCM7XX_ADC_CON:
+        value = s->con;
+        break;
+
+    case A_NPCM7XX_ADC_DATA:
+        value = s->data;
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+    trace_npcm7xx_adc_read(DEVICE(s)->canonical_path, offset, value);
+    return value;
+}
+
+static void npcm7xx_adc_write(void *opaque, hwaddr offset, uint64_t v,
+        unsigned size)
+{
+    NPCM7xxADCState *s = opaque;
+
+    trace_npcm7xx_adc_write(DEVICE(s)->canonical_path, offset, v);
+    switch (offset) {
+    case A_NPCM7XX_ADC_CON:
+        npcm7xx_adc_write_con(s, v);
+        break;
+
+    case A_NPCM7XX_ADC_DATA:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
+                      __func__, offset);
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+}
+
+static const struct MemoryRegionOps npcm7xx_adc_ops = {
+    .read       = npcm7xx_adc_read,
+    .write      = npcm7xx_adc_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid      = {
+        .min_access_size        = 4,
+        .max_access_size        = 4,
+        .unaligned              = false,
+    },
+};
+
+static void npcm7xx_adc_enter_reset(Object *obj, ResetType type)
+{
+    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
+
+    npcm7xx_adc_reset(s);
+}
+
+static void npcm7xx_adc_hold_reset(Object *obj)
+{
+    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
+
+    qemu_irq_lower(s->irq);
+}
+
+static void npcm7xx_adc_init(Object *obj)
+{
+    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    int i;
+
+    sysbus_init_irq(sbd, &s->irq);
+
+    timer_init_ns(&s->conv_timer, QEMU_CLOCK_VIRTUAL,
+            npcm7xx_adc_convert_done, s);
+    memory_region_init_io(&s->iomem, obj, &npcm7xx_adc_ops, s,
+                          TYPE_NPCM7XX_ADC, 4 * KiB);
+    sysbus_init_mmio(sbd, &s->iomem);
+    s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL);
+
+    for (i = 0; i < NPCM7XX_ADC_NUM_INPUTS; ++i) {
+        object_property_add_uint32_ptr(obj, "adci[*]",
+                &s->adci[i], OBJ_PROP_FLAG_WRITE);
+    }
+    object_property_add_uint32_ptr(obj, "vref",
+            &s->vref, OBJ_PROP_FLAG_WRITE);
+    npcm7xx_adc_calibrate(s);
+}
+
+static const VMStateDescription vmstate_npcm7xx_adc = {
+    .name = "npcm7xx-adc",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_TIMER(conv_timer, NPCM7xxADCState),
+        VMSTATE_UINT32(con, NPCM7xxADCState),
+        VMSTATE_UINT32(data, NPCM7xxADCState),
+        VMSTATE_CLOCK(clock, NPCM7xxADCState),
+        VMSTATE_UINT32_ARRAY(adci, NPCM7xxADCState, NPCM7XX_ADC_NUM_INPUTS),
+        VMSTATE_UINT32(vref, NPCM7xxADCState),
+        VMSTATE_UINT32(iref, NPCM7xxADCState),
+        VMSTATE_UINT16_ARRAY(calibration_r_values, NPCM7xxADCState,
+                NPCM7XX_ADC_NUM_CALIB),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static Property npcm7xx_timer_properties[] = {
+    DEFINE_PROP_UINT32("iref", NPCM7xxADCState, iref, NPCM7XX_ADC_DEFAULT_IREF),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void npcm7xx_adc_class_init(ObjectClass *klass, void *data)
+{
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx ADC Module";
+    dc->vmsd = &vmstate_npcm7xx_adc;
+    rc->phases.enter = npcm7xx_adc_enter_reset;
+    rc->phases.hold = npcm7xx_adc_hold_reset;
+
+    device_class_set_props(dc, npcm7xx_timer_properties);
+}
+
+static const TypeInfo npcm7xx_adc_info = {
+    .name               = TYPE_NPCM7XX_ADC,
+    .parent             = TYPE_SYS_BUS_DEVICE,
+    .instance_size      = sizeof(NPCM7xxADCState),
+    .class_init         = npcm7xx_adc_class_init,
+    .instance_init      = npcm7xx_adc_init,
+};
+
+static void npcm7xx_adc_register_types(void)
+{
+    type_register_static(&npcm7xx_adc_info);
+}
+
+type_init(npcm7xx_adc_register_types);
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@
 #define NPCM7XX_EHCI_BA         (0xf0806000)
 #define NPCM7XX_OHCI_BA         (0xf0807000)
 
+/* ADC Module */
+#define NPCM7XX_ADC_BA          (0xf000c000)
+
 /* Internal AHB SRAM */
 #define NPCM7XX_RAM3_BA         (0xc0008000)
 #define NPCM7XX_RAM3_SZ         (4 * KiB)
@@ -XXX,XX +XXX,XX @@
 #define NPCM7XX_ROM_BA          (0xffff0000)
 #define NPCM7XX_ROM_SZ          (64 * KiB)
 
+
 /* Clock configuration values to be fixed up when bypassing bootloader */
 
 /* Run PLL1 at 1600 MHz */
@@ -XXX,XX +XXX,XX @@
  * interrupts.
  */
 enum NPCM7xxInterrupt {
+    NPCM7XX_ADC_IRQ             = 0,
     NPCM7XX_UART0_IRQ           = 2,
     NPCM7XX_UART1_IRQ,
     NPCM7XX_UART2_IRQ,
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init_fuses(NPCM7xxState *s)
                             sizeof(value));
 }
 
+static void npcm7xx_write_adc_calibration(NPCM7xxState *s)
+{
+    /* Both ADC and the fuse array must have realized. */
+    QEMU_BUILD_BUG_ON(sizeof(s->adc.calibration_r_values) != 4);
+    npcm7xx_otp_array_write(&s->fuse_array, s->adc.calibration_r_values,
+            NPCM7XX_FUSE_ADC_CALIB, sizeof(s->adc.calibration_r_values));
+}
+
 static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n)
 {
     return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj)
                             TYPE_NPCM7XX_FUSE_ARRAY);
     object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC);
     object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG);
+    object_initialize_child(obj, "adc", &s->adc, TYPE_NPCM7XX_ADC);
 
     for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
         object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
     sysbus_realize(SYS_BUS_DEVICE(&s->mc), &error_abort);
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->mc), 0, NPCM7XX_MC_BA);
 
+    /* ADC Modules. Cannot fail. */
+    qdev_connect_clock_in(DEVICE(&s->adc), "clock", qdev_get_clock_out(
+                          DEVICE(&s->clk), "adc-clock"));
+    sysbus_realize(SYS_BUS_DEVICE(&s->adc), &error_abort);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->adc), 0, NPCM7XX_ADC_BA);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->adc), 0,
+            npcm7xx_irq(s, NPCM7XX_ADC_IRQ));
+    npcm7xx_write_adc_calibration(s);
+
     /* Timer Modules (TIM). Cannot fail. */
     QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
     for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
     create_unimplemented_device("npcm7xx.vdmx",         0xe0800000,   4 * KiB);
     create_unimplemented_device("npcm7xx.pcierc",       0xe1000000,  64 * KiB);
     create_unimplemented_device("npcm7xx.kcs",          0xf0007000,   4 * KiB);
-    create_unimplemented_device("npcm7xx.adc",          0xf000c000,   4 * KiB);
     create_unimplemented_device("npcm7xx.gfxi",         0xf000e000,   4 * KiB);
     create_unimplemented_device("npcm7xx.gpio[0]",      0xf0010000,   4 * KiB);
     create_unimplemented_device("npcm7xx.gpio[1]",      0xf0011000,   4 * KiB);
diff --git a/tests/qtest/npcm7xx_adc-test.c b/tests/qtest/npcm7xx_adc-test.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/qtest/npcm7xx_adc-test.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * QTests for Nuvoton NPCM7xx ADCModules.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/bitops.h"
+#include "qemu/timer.h"
+#include "libqos/libqtest.h"
+#include "qapi/qmp/qdict.h"
+
+#define REF_HZ          (25000000)
+
+#define CON_OFFSET      0x0
+#define DATA_OFFSET     0x4
+
+#define NUM_INPUTS      8
+#define DEFAULT_IREF    2000000
+#define CONV_CYCLES     20
+#define RESET_CYCLES    10
+#define R0_INPUT        500000
+#define R1_INPUT        1500000
+#define MAX_RESULT      1023
+
+#define DEFAULT_CLKDIV  5
+
+#define FUSE_ARRAY_BA   0xf018a000
+#define FCTL_OFFSET     0x14
+#define FST_OFFSET      0x0
+#define FADDR_OFFSET    0x4
+#define FDATA_OFFSET    0x8
+#define ADC_CALIB_ADDR  24
+#define FUSE_READ       0x2
+
+/* Register field definitions. */
+#define CON_MUX(rv) ((rv) << 24)
+#define CON_INT_EN  BIT(21)
+#define CON_REFSEL  BIT(19)
+#define CON_INT     BIT(18)
+#define CON_EN      BIT(17)
+#define CON_RST     BIT(16)
+#define CON_CONV    BIT(14)
+#define CON_DIV(rv) extract32(rv, 1, 8)
+
+#define FST_RDST    BIT(1)
+#define FDATA_MASK  0xff
+
+#define MAX_ERROR   10000
+#define MIN_CALIB_INPUT 100000
+#define MAX_CALIB_INPUT 1800000
+
+static const uint32_t input_list[] = {
+    100000,
+    500000,
+    1000000,
+    1500000,
+    1800000,
+    2000000,
+};
+
+static const uint32_t vref_list[] = {
+    2000000,
+    2200000,
+    2500000,
+};
+
+static const uint32_t iref_list[] = {
+    1800000,
+    1900000,
+    2000000,
+    2100000,
+    2200000,
+};
+
+static const uint32_t div_list[] = {0, 1, 3, 7, 15};
+
+typedef struct ADC {
+    int irq;
+    uint64_t base_addr;
+} ADC;
+
+ADC adc = {
+    .irq        = 0,
+    .base_addr  = 0xf000c000
+};
+
+static uint32_t adc_read_con(QTestState *qts, const ADC *adc)
+{
+    return qtest_readl(qts, adc->base_addr + CON_OFFSET);
+}
+
+static void adc_write_con(QTestState *qts, const ADC *adc, uint32_t value)
+{
+    qtest_writel(qts, adc->base_addr + CON_OFFSET, value);
+}
+
+static uint32_t adc_read_data(QTestState *qts, const ADC *adc)
+{
+    return qtest_readl(qts, adc->base_addr + DATA_OFFSET);
+}
+
+static uint32_t adc_calibrate(uint32_t measured, uint32_t *rv)
+{
+    return R0_INPUT + (R1_INPUT - R0_INPUT) * (int32_t)(measured - rv[0])
+        / (int32_t)(rv[1] - rv[0]);
+}
+
+static void adc_qom_set(QTestState *qts, const ADC *adc,
+        const char *name, uint32_t value)
+{
+    QDict *response;
+    const char *path = "/machine/soc/adc";
+
+    g_test_message("Setting properties %s of %s with value %u",
+            name, path, value);
+    response = qtest_qmp(qts, "{ 'execute': 'qom-set',"
+            " 'arguments': { 'path': %s, 'property': %s, 'value': %u}}",
+            path, name, value);
+    /* The qom set message returns successfully. */
+    g_assert_true(qdict_haskey(response, "return"));
+}
+
+static void adc_write_input(QTestState *qts, const ADC *adc,
+        uint32_t index, uint32_t value)
+{
+    char name[100];
+
+    sprintf(name, "adci[%u]", index);
+    adc_qom_set(qts, adc, name, value);
+}
+
+static void adc_write_vref(QTestState *qts, const ADC *adc, uint32_t value)
+{
+    adc_qom_set(qts, adc, "vref", value);
+}
+
+static uint32_t adc_calculate_output(uint32_t input, uint32_t ref)
+{
+    uint32_t output;
+
+    g_assert_cmpuint(input, <=, ref);
+    output = (input * (MAX_RESULT + 1)) / ref;
+    if (output > MAX_RESULT) {
+        output = MAX_RESULT;
+    }
+
+    return output;
+}
+
+static uint32_t adc_prescaler(QTestState *qts, const ADC *adc)
+{
+    uint32_t div = extract32(adc_read_con(qts, adc), 1, 8);
+
+    return 2 * (div + 1);
+}
+
+static int64_t adc_calculate_steps(uint32_t cycles, uint32_t prescale,
+        uint32_t clkdiv)
+{
+    return (NANOSECONDS_PER_SECOND / (REF_HZ >> clkdiv)) * cycles * prescale;
+}
+
+static void adc_wait_conv_finished(QTestState *qts, const ADC *adc,
+        uint32_t clkdiv)
+{
+    uint32_t prescaler = adc_prescaler(qts, adc);
+
+    /*
+     * ADC should takes roughly 20 cycles to convert one sample. So we assert it
+     * should take 10~30 cycles here.
+     */
+    qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES / 2, prescaler,
+                clkdiv));
+    /* ADC is still converting. */
+    g_assert_true(adc_read_con(qts, adc) & CON_CONV);
+    qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES, prescaler, clkdiv));
+    /* ADC has finished conversion. */
+    g_assert_false(adc_read_con(qts, adc) & CON_CONV);
+}
+
+/* Check ADC can be reset to default value. */
+static void test_init(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    adc_write_con(qts, adc, CON_REFSEL | CON_INT);
+    g_assert_cmphex(adc_read_con(qts, adc), ==, CON_REFSEL);
+    qtest_quit(qts);
+}
+
+/* Check ADC can convert from an internal reference. */
+static void test_convert_internal(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+    uint32_t index, input, output, expected_output;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
+
+    for (index = 0; index < NUM_INPUTS; ++index) {
+        for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) {
+            input = input_list[i];
+            expected_output = adc_calculate_output(input, DEFAULT_IREF);
+
+            adc_write_input(qts, adc, index, input);
+            adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT |
+                    CON_EN | CON_CONV);
+            adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
+            g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) |
+                    CON_REFSEL | CON_EN);
+            g_assert_false(qtest_get_irq(qts, adc->irq));
+            output = adc_read_data(qts, adc);
+            g_assert_cmpuint(output, ==, expected_output);
+        }
+    }
+
+    qtest_quit(qts);
+}
+
+/* Check ADC can convert from an external reference. */
+static void test_convert_external(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+    uint32_t index, input, vref, output, expected_output;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
+
+    for (index = 0; index < NUM_INPUTS; ++index) {
+        for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) {
+            for (size_t j = 0; j < ARRAY_SIZE(vref_list); ++j) {
+                input = input_list[i];
+                vref = vref_list[j];
+                expected_output = adc_calculate_output(input, vref);
+
+                adc_write_input(qts, adc, index, input);
+                adc_write_vref(qts, adc, vref);
+                adc_write_con(qts, adc, CON_MUX(index) | CON_INT | CON_EN |
+                        CON_CONV);
+                adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
+                g_assert_cmphex(adc_read_con(qts, adc), ==,
+                        CON_MUX(index) | CON_EN);
+                g_assert_false(qtest_get_irq(qts, adc->irq));
+                output = adc_read_data(qts, adc);
+                g_assert_cmpuint(output, ==, expected_output);
+            }
+        }
+    }
+
+    qtest_quit(qts);
+}
+
+/* Check ADC interrupt files if and only if CON_INT_EN is set. */
+static void test_interrupt(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+    uint32_t index, input, output, expected_output;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+
+    index = 1;
+    input = input_list[1];
+    expected_output = adc_calculate_output(input, DEFAULT_IREF);
+
+    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
+    adc_write_input(qts, adc, index, input);
+    g_assert_false(qtest_get_irq(qts, adc->irq));
+    adc_write_con(qts, adc, CON_MUX(index) | CON_INT_EN | CON_REFSEL | CON_INT
+            | CON_EN | CON_CONV);
+    adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
+    g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) | CON_INT_EN
+            | CON_REFSEL | CON_INT | CON_EN);
+    g_assert_true(qtest_get_irq(qts, adc->irq));
+    output = adc_read_data(qts, adc);
+    g_assert_cmpuint(output, ==, expected_output);
+
+    qtest_quit(qts);
+}
+
+/* Check ADC is reset after setting ADC_RST for 10 ADC cycles. */
+static void test_reset(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+
+    for (size_t i = 0; i < ARRAY_SIZE(div_list); ++i) {
+        uint32_t div = div_list[i];
+
+        adc_write_con(qts, adc, CON_INT | CON_EN | CON_RST | CON_DIV(div));
+        qtest_clock_step(qts, adc_calculate_steps(RESET_CYCLES,
+                    adc_prescaler(qts, adc), DEFAULT_CLKDIV));
+        g_assert_false(adc_read_con(qts, adc) & CON_EN);
+    }
+    qtest_quit(qts);
+}
+
+/* Check ADC Calibration works as desired. */
+static void test_calibrate(gconstpointer adc_p)
+{
+    int i, j;
+    const ADC *adc = adc_p;
+
+    for (j = 0; j < ARRAY_SIZE(iref_list); ++j) {
+        uint32_t iref = iref_list[j];
+        uint32_t expected_rv[] = {
+            adc_calculate_output(R0_INPUT, iref),
+            adc_calculate_output(R1_INPUT, iref),
+        };
+        char buf[100];
+        QTestState *qts;
+
+        sprintf(buf, "-machine quanta-gsj -global npcm7xx-adc.iref=%u", iref);
+        qts = qtest_init(buf);
+
+        /* Check the converted value is correct using the calibration value. */
+        for (i = 0; i < ARRAY_SIZE(input_list); ++i) {
+            uint32_t input;
+            uint32_t output;
+            uint32_t expected_output;
+            uint32_t calibrated_voltage;
+            uint32_t index = 0;
+
+            input = input_list[i];
+            /* Calibration only works for input range 0.1V ~ 1.8V. */
+            if (input < MIN_CALIB_INPUT || input > MAX_CALIB_INPUT) {
+                continue;
+            }
+            expected_output = adc_calculate_output(input, iref);
+
+            adc_write_input(qts, adc, index, input);
+            adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT |
+                    CON_EN | CON_CONV);
+            adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
+            g_assert_cmphex(adc_read_con(qts, adc), ==,
+                    CON_REFSEL | CON_MUX(index) | CON_EN);
+            output = adc_read_data(qts, adc);
+            g_assert_cmpuint(output, ==, expected_output);
+
+            calibrated_voltage = adc_calibrate(output, expected_rv);
+            g_assert_cmpuint(calibrated_voltage, >, input - MAX_ERROR);
+            g_assert_cmpuint(calibrated_voltage, <, input + MAX_ERROR);
+        }
+
+        qtest_quit(qts);
+    }
+}
+
+static void adc_add_test(const char *name, const ADC* wd,
+        GTestDataFunc fn)
+{
+    g_autofree char *full_name = g_strdup_printf("npcm7xx_adc/%s",  name);
+    qtest_add_data_func(full_name, wd, fn);
+}
+#define add_test(name, td) adc_add_test(#name, td, test_##name)
+
+int main(int argc, char **argv)
+{
+    g_test_init(&argc, &argv, NULL);
+
+    add_test(init, &adc);
+    add_test(convert_internal, &adc);
+    add_test(convert_external, &adc);
+    add_test(interrupt, &adc);
+    add_test(reset, &adc);
+    add_test(calibrate, &adc);
+
+    return g_test_run();
+}
diff --git a/hw/adc/meson.build b/hw/adc/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/adc/meson.build
+++ b/hw/adc/meson.build
@@ -1 +1,2 @@
 softmmu_ss.add(when: 'CONFIG_STM32F2XX_ADC', if_true: files('stm32f2xx_adc.c'))
+softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_adc.c'))
diff --git a/hw/adc/trace-events b/hw/adc/trace-events
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/adc/trace-events
@@ -XXX,XX +XXX,XX @@
+# See docs/devel/tracing.txt for syntax documentation.
+
+# npcm7xx_adc.c
+npcm7xx_adc_read(const char *id, uint64_t offset, uint32_t value) " %s offset: 0x%04" PRIx64 " value 0x%04" PRIx32
+npcm7xx_adc_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value 0x%04" PRIx32
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \
   ['prom-env-test', 'boot-serial-test']
 
 qtests_npcm7xx = \
-  ['npcm7xx_gpio-test',
+  ['npcm7xx_adc-test',
+   'npcm7xx_gpio-test',
    'npcm7xx_rng-test',
    'npcm7xx_timer-test',
    'npcm7xx_watchdog_timer-test']
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
identical PWM modules. Each module contains 4 PWM entries. Each PWM has
two outputs: frequency and duty_cycle. Both are computed using inputs
from software side.

This module does not model detail pulse signals since it is expensive.
It also does not model interrupts and watchdogs that are dependant on
the detail models. The interfaces for these are left in the module so
that anyone in need for these functionalities can implement on their
own.

The user can read the duty cycle and frequency using qom-get command.

diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/nuvoton.rst
+++ b/docs/system/arm/nuvoton.rst
@@ -XXX,XX +XXX,XX @@ Supported devices
  * USB host (USBH)
  * GPIO controller
  * Analog to Digital Converter (ADC)
+ * Pulse Width Modulation (PWM)
 
 Missing devices
 ---------------
@@ -XXX,XX +XXX,XX @@ Missing devices
  * Peripheral SPI controller (PSPI)
  * SD/MMC host
  * PECI interface
- * Pulse Width Modulation (PWM)
  * Tachometer
  * PCI and PCIe root complex and bridges
  * VDM and MCTP support
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/mem/npcm7xx_mc.h"
 #include "hw/misc/npcm7xx_clk.h"
 #include "hw/misc/npcm7xx_gcr.h"
+#include "hw/misc/npcm7xx_pwm.h"
 #include "hw/misc/npcm7xx_rng.h"
 #include "hw/nvram/npcm7xx_otp.h"
 #include "hw/timer/npcm7xx_timer.h"
@@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState {
     NPCM7xxCLKState     clk;
     NPCM7xxTimerCtrlState tim[3];
     NPCM7xxADCState     adc;
+    NPCM7xxPWMState     pwm[2];
     NPCM7xxOTPState     key_storage;
     NPCM7xxOTPState     fuse_array;
     NPCM7xxMCState      mc;
diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/misc/npcm7xx_pwm.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nuvoton NPCM7xx PWM Module
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_PWM_H
+#define NPCM7XX_PWM_H
+
+#include "hw/clock.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+
+/* Each PWM module holds 4 PWM channels. */
+#define NPCM7XX_PWM_PER_MODULE 4
+
+/*
+ * Number of registers in one pwm module. Don't change this without increasing
+ * the version_id in vmstate.
+ */
+#define NPCM7XX_PWM_NR_REGS (0x54 / sizeof(uint32_t))
+
+/*
+ * The maximum duty values. Each duty unit represents 1/NPCM7XX_PWM_MAX_DUTY
+ * cycles. For example, if NPCM7XX_PWM_MAX_DUTY=1,000,000 and a PWM has a duty
+ * value of 100,000 the duty cycle for that PWM is 10%.
+ */
+#define NPCM7XX_PWM_MAX_DUTY 1000000
+
+typedef struct NPCM7xxPWMState NPCM7xxPWMState;
+
+/**
+ * struct NPCM7xxPWM - The state of a single PWM channel.
+ * @module: The PWM module that contains this channel.
+ * @irq: GIC interrupt line to fire on expiration if enabled.
+ * @running: Whether this PWM channel is generating output.
+ * @inverted: Whether this PWM channel is inverted.
+ * @index: The index of this PWM channel.
+ * @cnr: The counter register.
+ * @cmr: The comparator register.
+ * @pdr: The data register.
+ * @pwdr: The watchdog register.
+ * @freq: The frequency of this PWM channel.
+ * @duty: The duty cycle of this PWM channel. One unit represents
+ *   1/NPCM7XX_MAX_DUTY cycles.
+ */
+typedef struct NPCM7xxPWM {
+    NPCM7xxPWMState         *module;
+
+    qemu_irq                irq;
+
+    bool                    running;
+    bool                    inverted;
+
+    uint8_t                 index;
+    uint32_t                cnr;
+    uint32_t                cmr;
+    uint32_t                pdr;
+    uint32_t                pwdr;
+
+    uint32_t                freq;
+    uint32_t                duty;
+} NPCM7xxPWM;
+
+/**
+ * struct NPCM7xxPWMState - Pulse Width Modulation device state.
+ * @parent: System bus device.
+ * @iomem: Memory region through which registers are accessed.
+ * @clock: The PWM clock.
+ * @pwm: The PWM channels owned by this module.
+ * @ppr: The prescaler register.
+ * @csr: The clock selector register.
+ * @pcr: The control register.
+ * @pier: The interrupt enable register.
+ * @piir: The interrupt indication register.
+ */
+struct NPCM7xxPWMState {
+    SysBusDevice parent;
+
+    MemoryRegion iomem;
+
+    Clock       *clock;
+    NPCM7xxPWM pwm[NPCM7XX_PWM_PER_MODULE];
+
+    uint32_t    ppr;
+    uint32_t    csr;
+    uint32_t    pcr;
+    uint32_t    pier;
+    uint32_t    piir;
+};
+
+#define TYPE_NPCM7XX_PWM "npcm7xx-pwm"
+#define NPCM7XX_PWM(obj) \
+    OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM)
+
+#endif /* NPCM7XX_PWM_H */
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt {
     NPCM7XX_WDG2_IRQ,                   /* Timer Module 2 Watchdog */
     NPCM7XX_EHCI_IRQ            = 61,
     NPCM7XX_OHCI_IRQ            = 62,
+    NPCM7XX_PWM0_IRQ            = 93,   /* PWM module 0 */
+    NPCM7XX_PWM1_IRQ,                   /* PWM module 1 */
     NPCM7XX_GPIO0_IRQ           = 116,
     NPCM7XX_GPIO1_IRQ,
     NPCM7XX_GPIO2_IRQ,
@@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_fiu3_flash_addr[] = {
     0xb8000000, /* CS3 */
 };
 
+/* Register base address for each PWM Module */
+static const hwaddr npcm7xx_pwm_addr[] = {
+    0xf0103000,
+    0xf0104000,
+};
+
 static const struct {
     hwaddr regs_addr;
     uint32_t unconnected_pins;
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj)
         object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i],
                                 TYPE_NPCM7XX_FIU);
     }
+
+    for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
+        object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM);
+    }
 }
 
 static void npcm7xx_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci), 0,
                        npcm7xx_irq(s, NPCM7XX_OHCI_IRQ));
 
+    /* PWM Modules. Cannot fail. */
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pwm_addr) != ARRAY_SIZE(s->pwm));
+    for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
+        SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pwm[i]);
+
+        qdev_connect_clock_in(DEVICE(&s->pwm[i]), "clock", qdev_get_clock_out(
+                    DEVICE(&s->clk), "apb3-clock"));
+        sysbus_realize(sbd, &error_abort);
+        sysbus_mmio_map(sbd, 0, npcm7xx_pwm_addr[i]);
+        sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i));
+    }
+
     /*
      * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects
      * specified, but this is a programming error.
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
     create_unimplemented_device("npcm7xx.peci",         0xf0100000,   4 * KiB);
     create_unimplemented_device("npcm7xx.siox[1]",      0xf0101000,   4 * KiB);
     create_unimplemented_device("npcm7xx.siox[2]",      0xf0102000,   4 * KiB);
-    create_unimplemented_device("npcm7xx.pwm[0]",       0xf0103000,   4 * KiB);
-    create_unimplemented_device("npcm7xx.pwm[1]",       0xf0104000,   4 * KiB);
     create_unimplemented_device("npcm7xx.mft[0]",       0xf0180000,   4 * KiB);
     create_unimplemented_device("npcm7xx.mft[1]",       0xf0181000,   4 * KiB);
     create_unimplemented_device("npcm7xx.mft[2]",       0xf0182000,   4 * KiB);
diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/misc/npcm7xx_pwm.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nuvoton NPCM7xx PWM Module
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/irq.h"
+#include "hw/qdev-clock.h"
+#include "hw/qdev-properties.h"
+#include "hw/misc/npcm7xx_pwm.h"
+#include "hw/registerfields.h"
+#include "migration/vmstate.h"
+#include "qemu/bitops.h"
+#include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+#include "trace.h"
+
+REG32(NPCM7XX_PWM_PPR, 0x00);
+REG32(NPCM7XX_PWM_CSR, 0x04);
+REG32(NPCM7XX_PWM_PCR, 0x08);
+REG32(NPCM7XX_PWM_CNR0, 0x0c);
+REG32(NPCM7XX_PWM_CMR0, 0x10);
+REG32(NPCM7XX_PWM_PDR0, 0x14);
+REG32(NPCM7XX_PWM_CNR1, 0x18);
+REG32(NPCM7XX_PWM_CMR1, 0x1c);
+REG32(NPCM7XX_PWM_PDR1, 0x20);
+REG32(NPCM7XX_PWM_CNR2, 0x24);
+REG32(NPCM7XX_PWM_CMR2, 0x28);
+REG32(NPCM7XX_PWM_PDR2, 0x2c);
+REG32(NPCM7XX_PWM_CNR3, 0x30);
+REG32(NPCM7XX_PWM_CMR3, 0x34);
+REG32(NPCM7XX_PWM_PDR3, 0x38);
+REG32(NPCM7XX_PWM_PIER, 0x3c);
+REG32(NPCM7XX_PWM_PIIR, 0x40);
+REG32(NPCM7XX_PWM_PWDR0, 0x44);
+REG32(NPCM7XX_PWM_PWDR1, 0x48);
+REG32(NPCM7XX_PWM_PWDR2, 0x4c);
+REG32(NPCM7XX_PWM_PWDR3, 0x50);
+
+/* Register field definitions. */
+#define NPCM7XX_PPR(rv, index)      extract32((rv), npcm7xx_ppr_base[index], 8)
+#define NPCM7XX_CSR(rv, index)      extract32((rv), npcm7xx_csr_base[index], 3)
+#define NPCM7XX_CH(rv, index)       extract32((rv), npcm7xx_ch_base[index], 4)
+#define NPCM7XX_CH_EN               BIT(0)
+#define NPCM7XX_CH_INV              BIT(2)
+#define NPCM7XX_CH_MOD              BIT(3)
+
+/* Offset of each PWM channel's prescaler in the PPR register. */
+static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 };
+/* Offset of each PWM channel's clock selector in the CSR register. */
+static const int npcm7xx_csr_base[] = { 0, 4, 8, 12 };
+/* Offset of each PWM channel's control variable in the PCR register. */
+static const int npcm7xx_ch_base[] = { 0, 8, 12, 16 };
+
+static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p)
+{
+    uint32_t ppr;
+    uint32_t csr;
+    uint32_t freq;
+
+    if (!p->running) {
+        return 0;
+    }
+
+    csr = NPCM7XX_CSR(p->module->csr, p->index);
+    ppr = NPCM7XX_PPR(p->module->ppr, p->index);
+    freq = clock_get_hz(p->module->clock);
+    freq /= ppr + 1;
+    /* csr can only be 0~4 */
+    if (csr > 4) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid csr value %u\n",
+                      __func__, csr);
+        csr = 4;
+    }
+    /* freq won't be changed if csr == 4. */
+    if (csr < 4) {
+        freq >>= csr + 1;
+    }
+
+    return freq / (p->cnr + 1);
+}
+
+static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p)
+{
+    uint64_t duty;
+
+    if (p->running) {
+        if (p->cnr == 0) {
+            duty = 0;
+        } else if (p->cmr >= p->cnr) {
+            duty = NPCM7XX_PWM_MAX_DUTY;
+        } else {
+            duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1);
+        }
+    } else {
+        duty = 0;
+    }
+
+    if (p->inverted) {
+        duty = NPCM7XX_PWM_MAX_DUTY - duty;
+    }
+
+    return duty;
+}
+
+static void npcm7xx_pwm_update_freq(NPCM7xxPWM *p)
+{
+    uint32_t freq = npcm7xx_pwm_calculate_freq(p);
+
+    if (freq != p->freq) {
+        trace_npcm7xx_pwm_update_freq(DEVICE(p->module)->canonical_path,
+                                      p->index, p->freq, freq);
+        p->freq = freq;
+    }
+}
+
+static void npcm7xx_pwm_update_duty(NPCM7xxPWM *p)
+{
+    uint32_t duty = npcm7xx_pwm_calculate_duty(p);
+
+    if (duty != p->duty) {
+        trace_npcm7xx_pwm_update_duty(DEVICE(p->module)->canonical_path,
+                                      p->index, p->duty, duty);
+        p->duty = duty;
+    }
+}
+
+static void npcm7xx_pwm_update_output(NPCM7xxPWM *p)
+{
+    npcm7xx_pwm_update_freq(p);
+    npcm7xx_pwm_update_duty(p);
+}
+
+static void npcm7xx_pwm_write_ppr(NPCM7xxPWMState *s, uint32_t new_ppr)
+{
+    int i;
+    uint32_t old_ppr = s->ppr;
+
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ppr_base) != NPCM7XX_PWM_PER_MODULE);
+    s->ppr = new_ppr;
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
+        if (NPCM7XX_PPR(old_ppr, i) != NPCM7XX_PPR(new_ppr, i)) {
+            npcm7xx_pwm_update_freq(&s->pwm[i]);
+        }
+    }
+}
+
+static void npcm7xx_pwm_write_csr(NPCM7xxPWMState *s, uint32_t new_csr)
+{
+    int i;
+    uint32_t old_csr = s->csr;
+
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_csr_base) != NPCM7XX_PWM_PER_MODULE);
+    s->csr = new_csr;
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
+        if (NPCM7XX_CSR(old_csr, i) != NPCM7XX_CSR(new_csr, i)) {
+            npcm7xx_pwm_update_freq(&s->pwm[i]);
+        }
+    }
+}
+
+static void npcm7xx_pwm_write_pcr(NPCM7xxPWMState *s, uint32_t new_pcr)
+{
+    int i;
+    bool inverted;
+    uint32_t pcr;
+    NPCM7xxPWM *p;
+
+    s->pcr = new_pcr;
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ch_base) != NPCM7XX_PWM_PER_MODULE);
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
+        p = &s->pwm[i];
+        pcr = NPCM7XX_CH(new_pcr, i);
+        inverted = pcr & NPCM7XX_CH_INV;
+
+        /*
+         * We only run a PWM channel with toggle mode. Single-shot mode does not
+         * generate frequency and duty-cycle values.
+         */
+        if ((pcr & NPCM7XX_CH_EN) && (pcr & NPCM7XX_CH_MOD)) {
+            if (p->running) {
+                /* Re-run this PWM channel if inverted changed. */
+                if (p->inverted ^ inverted) {
+                    p->inverted = inverted;
+                    npcm7xx_pwm_update_duty(p);
+                }
+            } else {
+                /* Run this PWM channel. */
+                p->running = true;
+                p->inverted = inverted;
+                npcm7xx_pwm_update_output(p);
+            }
+        } else {
+            /* Clear this PWM channel. */
+            p->running = false;
+            p->inverted = inverted;
+            npcm7xx_pwm_update_output(p);
+        }
+    }
+
+}
+
+static hwaddr npcm7xx_cnr_index(hwaddr offset)
+{
+    switch (offset) {
+    case A_NPCM7XX_PWM_CNR0:
+        return 0;
+    case A_NPCM7XX_PWM_CNR1:
+        return 1;
+    case A_NPCM7XX_PWM_CNR2:
+        return 2;
+    case A_NPCM7XX_PWM_CNR3:
+        return 3;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static hwaddr npcm7xx_cmr_index(hwaddr offset)
+{
+    switch (offset) {
+    case A_NPCM7XX_PWM_CMR0:
+        return 0;
+    case A_NPCM7XX_PWM_CMR1:
+        return 1;
+    case A_NPCM7XX_PWM_CMR2:
+        return 2;
+    case A_NPCM7XX_PWM_CMR3:
+        return 3;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static hwaddr npcm7xx_pdr_index(hwaddr offset)
+{
+    switch (offset) {
+    case A_NPCM7XX_PWM_PDR0:
+        return 0;
+    case A_NPCM7XX_PWM_PDR1:
+        return 1;
+    case A_NPCM7XX_PWM_PDR2:
+        return 2;
+    case A_NPCM7XX_PWM_PDR3:
+        return 3;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static hwaddr npcm7xx_pwdr_index(hwaddr offset)
+{
+    switch (offset) {
+    case A_NPCM7XX_PWM_PWDR0:
+        return 0;
+    case A_NPCM7XX_PWM_PWDR1:
+        return 1;
+    case A_NPCM7XX_PWM_PWDR2:
+        return 2;
+    case A_NPCM7XX_PWM_PWDR3:
+        return 3;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static uint64_t npcm7xx_pwm_read(void *opaque, hwaddr offset, unsigned size)
+{
+    NPCM7xxPWMState *s = opaque;
+    uint64_t value = 0;
+
+    switch (offset) {
+    case A_NPCM7XX_PWM_CNR0:
+    case A_NPCM7XX_PWM_CNR1:
+    case A_NPCM7XX_PWM_CNR2:
+    case A_NPCM7XX_PWM_CNR3:
+        value = s->pwm[npcm7xx_cnr_index(offset)].cnr;
+        break;
+
+    case A_NPCM7XX_PWM_CMR0:
+    case A_NPCM7XX_PWM_CMR1:
+    case A_NPCM7XX_PWM_CMR2:
+    case A_NPCM7XX_PWM_CMR3:
+        value = s->pwm[npcm7xx_cmr_index(offset)].cmr;
+        break;
+
+    case A_NPCM7XX_PWM_PDR0:
+    case A_NPCM7XX_PWM_PDR1:
+    case A_NPCM7XX_PWM_PDR2:
+    case A_NPCM7XX_PWM_PDR3:
+        value = s->pwm[npcm7xx_pdr_index(offset)].pdr;
+        break;
+
+    case A_NPCM7XX_PWM_PWDR0:
+    case A_NPCM7XX_PWM_PWDR1:
+    case A_NPCM7XX_PWM_PWDR2:
+    case A_NPCM7XX_PWM_PWDR3:
+        value = s->pwm[npcm7xx_pwdr_index(offset)].pwdr;
+        break;
+
+    case A_NPCM7XX_PWM_PPR:
+        value = s->ppr;
+        break;
+
+    case A_NPCM7XX_PWM_CSR:
+        value = s->csr;
+        break;
+
+    case A_NPCM7XX_PWM_PCR:
+        value = s->pcr;
+        break;
+
+    case A_NPCM7XX_PWM_PIER:
+        value = s->pier;
+        break;
+
+    case A_NPCM7XX_PWM_PIIR:
+        value = s->piir;
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+    trace_npcm7xx_pwm_read(DEVICE(s)->canonical_path, offset, value);
+    return value;
+}
+
+static void npcm7xx_pwm_write(void *opaque, hwaddr offset,
+                                uint64_t v, unsigned size)
+{
+    NPCM7xxPWMState *s = opaque;
+    NPCM7xxPWM *p;
+    uint32_t value = v;
+
+    trace_npcm7xx_pwm_write(DEVICE(s)->canonical_path, offset, value);
+    switch (offset) {
+    case A_NPCM7XX_PWM_CNR0:
+    case A_NPCM7XX_PWM_CNR1:
+    case A_NPCM7XX_PWM_CNR2:
+    case A_NPCM7XX_PWM_CNR3:
+        p = &s->pwm[npcm7xx_cnr_index(offset)];
+        p->cnr = value;
+        npcm7xx_pwm_update_output(p);
+        break;
+
+    case A_NPCM7XX_PWM_CMR0:
+    case A_NPCM7XX_PWM_CMR1:
+    case A_NPCM7XX_PWM_CMR2:
+    case A_NPCM7XX_PWM_CMR3:
+        p = &s->pwm[npcm7xx_cmr_index(offset)];
+        p->cmr = value;
+        npcm7xx_pwm_update_output(p);
+        break;
+
+    case A_NPCM7XX_PWM_PDR0:
+    case A_NPCM7XX_PWM_PDR1:
+    case A_NPCM7XX_PWM_PDR2:
+    case A_NPCM7XX_PWM_PDR3:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
+                      __func__, offset);
+        break;
+
+    case A_NPCM7XX_PWM_PWDR0:
+    case A_NPCM7XX_PWM_PWDR1:
+    case A_NPCM7XX_PWM_PWDR2:
+    case A_NPCM7XX_PWM_PWDR3:
+        qemu_log_mask(LOG_UNIMP,
+                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
+                     __func__, offset);
+        break;
+
+    case A_NPCM7XX_PWM_PPR:
+        npcm7xx_pwm_write_ppr(s, value);
+        break;
+
+    case A_NPCM7XX_PWM_CSR:
+        npcm7xx_pwm_write_csr(s, value);
+        break;
+
+    case A_NPCM7XX_PWM_PCR:
+        npcm7xx_pwm_write_pcr(s, value);
+        break;
+
+    case A_NPCM7XX_PWM_PIER:
+        qemu_log_mask(LOG_UNIMP,
+                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
+                     __func__, offset);
+        break;
+
+    case A_NPCM7XX_PWM_PIIR:
+        qemu_log_mask(LOG_UNIMP,
+                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
+                     __func__, offset);
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+}
+
+static const struct MemoryRegionOps npcm7xx_pwm_ops = {
+    .read       = npcm7xx_pwm_read,
+    .write      = npcm7xx_pwm_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid      = {
+        .min_access_size        = 4,
+        .max_access_size        = 4,
+        .unaligned              = false,
+    },
+};
+
+static void npcm7xx_pwm_enter_reset(Object *obj, ResetType type)
+{
+    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
+    int i;
+
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
+        NPCM7xxPWM *p = &s->pwm[i];
+
+        p->cnr = 0x00000000;
+        p->cmr = 0x00000000;
+        p->pdr = 0x00000000;
+        p->pwdr = 0x00000000;
+    }
+
+    s->ppr = 0x00000000;
+    s->csr = 0x00000000;
+    s->pcr = 0x00000000;
+    s->pier = 0x00000000;
+    s->piir = 0x00000000;
+}
+
+static void npcm7xx_pwm_hold_reset(Object *obj)
+{
+    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
+    int i;
+
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
+        qemu_irq_lower(s->pwm[i].irq);
+    }
+}
+
+static void npcm7xx_pwm_init(Object *obj)
+{
+    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    int i;
+
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
+        NPCM7xxPWM *p = &s->pwm[i];
+        p->module = s;
+        p->index = i;
+        sysbus_init_irq(sbd, &p->irq);
+    }
+
+    memory_region_init_io(&s->iomem, obj, &npcm7xx_pwm_ops, s,
+                          TYPE_NPCM7XX_PWM, 4 * KiB);
+    sysbus_init_mmio(sbd, &s->iomem);
+    s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL);
+
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
+        object_property_add_uint32_ptr(obj, "freq[*]",
+                &s->pwm[i].freq, OBJ_PROP_FLAG_READ);
+        object_property_add_uint32_ptr(obj, "duty[*]",
+                &s->pwm[i].duty, OBJ_PROP_FLAG_READ);
+    }
+}
+
+static const VMStateDescription vmstate_npcm7xx_pwm = {
+    .name = "npcm7xx-pwm",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_BOOL(running, NPCM7xxPWM),
+        VMSTATE_BOOL(inverted, NPCM7xxPWM),
+        VMSTATE_UINT8(index, NPCM7xxPWM),
+        VMSTATE_UINT32(cnr, NPCM7xxPWM),
+        VMSTATE_UINT32(cmr, NPCM7xxPWM),
+        VMSTATE_UINT32(pdr, NPCM7xxPWM),
+        VMSTATE_UINT32(pwdr, NPCM7xxPWM),
+        VMSTATE_UINT32(freq, NPCM7xxPWM),
+        VMSTATE_UINT32(duty, NPCM7xxPWM),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static const VMStateDescription vmstate_npcm7xx_pwm_module = {
+    .name = "npcm7xx-pwm-module",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_CLOCK(clock, NPCM7xxPWMState),
+        VMSTATE_STRUCT_ARRAY(pwm, NPCM7xxPWMState,
+                             NPCM7XX_PWM_PER_MODULE, 0, vmstate_npcm7xx_pwm,
+                             NPCM7xxPWM),
+        VMSTATE_UINT32(ppr, NPCM7xxPWMState),
+        VMSTATE_UINT32(csr, NPCM7xxPWMState),
+        VMSTATE_UINT32(pcr, NPCM7xxPWMState),
+        VMSTATE_UINT32(pier, NPCM7xxPWMState),
+        VMSTATE_UINT32(piir, NPCM7xxPWMState),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static void npcm7xx_pwm_class_init(ObjectClass *klass, void *data)
+{
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx PWM Controller";
+    dc->vmsd = &vmstate_npcm7xx_pwm_module;
+    rc->phases.enter = npcm7xx_pwm_enter_reset;
+    rc->phases.hold = npcm7xx_pwm_hold_reset;
+}
+
+static const TypeInfo npcm7xx_pwm_info = {
+    .name               = TYPE_NPCM7XX_PWM,
+    .parent             = TYPE_SYS_BUS_DEVICE,
+    .instance_size      = sizeof(NPCM7xxPWMState),
+    .class_init         = npcm7xx_pwm_class_init,
+    .instance_init      = npcm7xx_pwm_init,
+};
+
+static void npcm7xx_pwm_register_type(void)
+{
+    type_register_static(&npcm7xx_pwm_info);
+}
+type_init(npcm7xx_pwm_register_type);
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c'))
 softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files(
   'npcm7xx_clk.c',
   'npcm7xx_gcr.c',
+  'npcm7xx_pwm.c',
   'npcm7xx_rng.c',
 ))
 softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files(
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -XXX,XX +XXX,XX @@ npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " valu
 npcm7xx_rng_read(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u"
 npcm7xx_rng_write(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u"
 
+# npcm7xx_pwm.c
+npcm7xx_pwm_read(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+npcm7xx_pwm_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+npcm7xx_pwm_update_freq(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Freq: old_freq: %u, new_freq: %u"
+npcm7xx_pwm_update_duty(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Duty: old_duty: %u, new_duty: %u"
+
 # stm32f4xx_syscfg.c
 stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d"
 stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d"
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

We add a qtest for the PWM in the previous patch. It proves it works as
expected.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/qtest/npcm7xx_pwm-test.c | 490 +++++++++++++++++++++++++++++++++
 tests/qtest/meson.build        |   1 +
 2 files changed, 491 insertions(+)
 create mode 100644 tests/qtest/npcm7xx_pwm-test.c

diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/qtest/npcm7xx_pwm-test.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * QTests for Nuvoton NPCM7xx PWM Modules.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/bitops.h"
+#include "libqos/libqtest.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qnum.h"
+
+#define REF_HZ          25000000
+
+/* Register field definitions. */
+#define CH_EN           BIT(0)
+#define CH_INV          BIT(2)
+#define CH_MOD          BIT(3)
+
+/* Registers shared between all PWMs in a module */
+#define PPR             0x00
+#define CSR             0x04
+#define PCR             0x08
+#define PIER            0x3c
+#define PIIR            0x40
+
+/* CLK module related */
+#define CLK_BA          0xf0801000
+#define CLKSEL          0x04
+#define CLKDIV1         0x08
+#define CLKDIV2         0x2c
+#define PLLCON0         0x0c
+#define PLLCON1         0x10
+#define PLL_INDV(rv)    extract32((rv), 0, 6)
+#define PLL_FBDV(rv)    extract32((rv), 16, 12)
+#define PLL_OTDV1(rv)   extract32((rv), 8, 3)
+#define PLL_OTDV2(rv)   extract32((rv), 13, 3)
+#define APB3CKDIV(rv)   extract32((rv), 28, 2)
+#define CLK2CKDIV(rv)   extract32((rv), 0, 1)
+#define CLK4CKDIV(rv)   extract32((rv), 26, 2)
+#define CPUCKSEL(rv)    extract32((rv), 0, 2)
+
+#define MAX_DUTY        1000000
+
+typedef struct PWMModule {
+    int irq;
+    uint64_t base_addr;
+} PWMModule;
+
+typedef struct PWM {
+    uint32_t cnr_offset;
+    uint32_t cmr_offset;
+    uint32_t pdr_offset;
+    uint32_t pwdr_offset;
+} PWM;
+
+typedef struct TestData {
+    const PWMModule *module;
+    const PWM *pwm;
+} TestData;
+
+static const PWMModule pwm_module_list[] = {
+    {
+        .irq        = 93,
+        .base_addr  = 0xf0103000
+    },
+    {
+        .irq        = 94,
+        .base_addr  = 0xf0104000
+    }
+};
+
+static const PWM pwm_list[] = {
+    {
+        .cnr_offset     = 0x0c,
+        .cmr_offset     = 0x10,
+        .pdr_offset     = 0x14,
+        .pwdr_offset    = 0x44,
+    },
+    {
+        .cnr_offset     = 0x18,
+        .cmr_offset     = 0x1c,
+        .pdr_offset     = 0x20,
+        .pwdr_offset    = 0x48,
+    },
+    {
+        .cnr_offset     = 0x24,
+        .cmr_offset     = 0x28,
+        .pdr_offset     = 0x2c,
+        .pwdr_offset    = 0x4c,
+    },
+    {
+        .cnr_offset     = 0x30,
+        .cmr_offset     = 0x34,
+        .pdr_offset     = 0x38,
+        .pwdr_offset    = 0x50,
+    },
+};
+
+static const int ppr_base[] = { 0, 0, 8, 8 };
+static const int csr_base[] = { 0, 4, 8, 12 };
+static const int pcr_base[] = { 0, 8, 12, 16 };
+
+static const uint32_t ppr_list[] = {
+    0,
+    1,
+    10,
+    100,
+    255, /* Max possible value. */
+};
+
+static const uint32_t csr_list[] = {
+    0,
+    1,
+    2,
+    3,
+    4, /* Max possible value. */
+};
+
+static const uint32_t cnr_list[] = {
+    0,
+    1,
+    50,
+    100,
+    150,
+    200,
+    1000,
+    10000,
+    65535, /* Max possible value. */
+};
+
+static const uint32_t cmr_list[] = {
+    0,
+    1,
+    10,
+    50,
+    100,
+    150,
+    200,
+    1000,
+    10000,
+    65535, /* Max possible value. */
+};
+
+/* Returns the index of the PWM module. */
+static int pwm_module_index(const PWMModule *module)
+{
+    ptrdiff_t diff = module - pwm_module_list;
+
+    g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_module_list));
+
+    return diff;
+}
+
+/* Returns the index of the PWM entry. */
+static int pwm_index(const PWM *pwm)
+{
+    ptrdiff_t diff = pwm - pwm_list;
+
+    g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_list));
+
+    return diff;
+}
+
+static uint64_t pwm_qom_get(QTestState *qts, const char *path, const char *name)
+{
+    QDict *response;
+
+    g_test_message("Getting properties %s from %s", name, path);
+    response = qtest_qmp(qts, "{ 'execute': 'qom-get',"
+            " 'arguments': { 'path': %s, 'property': %s}}",
+            path, name);
+    /* The qom set message returns successfully. */
+    g_assert_true(qdict_haskey(response, "return"));
+    return qnum_get_uint(qobject_to(QNum, qdict_get(response, "return")));
+}
+
+static uint64_t pwm_get_freq(QTestState *qts, int module_index, int pwm_index)
+{
+    char path[100];
+    char name[100];
+
+    sprintf(path, "/machine/soc/pwm[%d]", module_index);
+    sprintf(name, "freq[%d]", pwm_index);
+
+    return pwm_qom_get(qts, path, name);
+}
+
+static uint64_t pwm_get_duty(QTestState *qts, int module_index, int pwm_index)
+{
+    char path[100];
+    char name[100];
+
+    sprintf(path, "/machine/soc/pwm[%d]", module_index);
+    sprintf(name, "duty[%d]", pwm_index);
+
+    return pwm_qom_get(qts, path, name);
+}
+
+static uint32_t get_pll(uint32_t con)
+{
+    return REF_HZ * PLL_FBDV(con) / (PLL_INDV(con) * PLL_OTDV1(con)
+            * PLL_OTDV2(con));
+}
+
+static uint64_t read_pclk(QTestState *qts)
+{
+    uint64_t freq = REF_HZ;
+    uint32_t clksel = qtest_readl(qts, CLK_BA + CLKSEL);
+    uint32_t pllcon;
+    uint32_t clkdiv1 = qtest_readl(qts, CLK_BA + CLKDIV1);
+    uint32_t clkdiv2 = qtest_readl(qts, CLK_BA + CLKDIV2);
+
+    switch (CPUCKSEL(clksel)) {
+    case 0:
+        pllcon = qtest_readl(qts, CLK_BA + PLLCON0);
+        freq = get_pll(pllcon);
+        break;
+    case 1:
+        pllcon = qtest_readl(qts, CLK_BA + PLLCON1);
+        freq = get_pll(pllcon);
+        break;
+    case 2:
+        break;
+    case 3:
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    freq >>= (CLK2CKDIV(clkdiv1) + CLK4CKDIV(clkdiv1) + APB3CKDIV(clkdiv2));
+
+    return freq;
+}
+
+static uint32_t pwm_selector(uint32_t csr)
+{
+    switch (csr) {
+    case 0:
+        return 2;
+    case 1:
+        return 4;
+    case 2:
+        return 8;
+    case 3:
+        return 16;
+    case 4:
+        return 1;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr,
+        uint32_t cnr)
+{
+    return read_pclk(qts) / ((ppr + 1) * pwm_selector(csr) * (cnr + 1));
+}
+
+static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted)
+{
+    uint64_t duty;
+
+    if (cnr == 0) {
+        /* PWM is stopped. */
+        duty = 0;
+    } else if (cmr >= cnr) {
+        duty = MAX_DUTY;
+    } else {
+        duty = MAX_DUTY * (cmr + 1) / (cnr + 1);
+    }
+
+    if (inverted) {
+        duty = MAX_DUTY - duty;
+    }
+
+    return duty;
+}
+
+static uint32_t pwm_read(QTestState *qts, const TestData *td, unsigned offset)
+{
+    return qtest_readl(qts, td->module->base_addr + offset);
+}
+
+static void pwm_write(QTestState *qts, const TestData *td, unsigned offset,
+        uint32_t value)
+{
+    qtest_writel(qts, td->module->base_addr + offset, value);
+}
+
+static uint32_t pwm_read_ppr(QTestState *qts, const TestData *td)
+{
+    return extract32(pwm_read(qts, td, PPR), ppr_base[pwm_index(td->pwm)], 8);
+}
+
+static void pwm_write_ppr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, PPR, value << ppr_base[pwm_index(td->pwm)]);
+}
+
+static uint32_t pwm_read_csr(QTestState *qts, const TestData *td)
+{
+    return extract32(pwm_read(qts, td, CSR), csr_base[pwm_index(td->pwm)], 3);
+}
+
+static void pwm_write_csr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, CSR, value << csr_base[pwm_index(td->pwm)]);
+}
+
+static uint32_t pwm_read_pcr(QTestState *qts, const TestData *td)
+{
+    return extract32(pwm_read(qts, td, PCR), pcr_base[pwm_index(td->pwm)], 4);
+}
+
+static void pwm_write_pcr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, PCR, value << pcr_base[pwm_index(td->pwm)]);
+}
+
+static uint32_t pwm_read_cnr(QTestState *qts, const TestData *td)
+{
+    return pwm_read(qts, td, td->pwm->cnr_offset);
+}
+
+static void pwm_write_cnr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, td->pwm->cnr_offset, value);
+}
+
+static uint32_t pwm_read_cmr(QTestState *qts, const TestData *td)
+{
+    return pwm_read(qts, td, td->pwm->cmr_offset);
+}
+
+static void pwm_write_cmr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, td->pwm->cmr_offset, value);
+}
+
+/* Check pwm registers can be reset to default value */
+static void test_init(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    int module = pwm_module_index(td->module);
+    int pwm = pwm_index(td->pwm);
+
+    g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0);
+    g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0);
+
+    qtest_quit(qts);
+}
+
+/* One-shot mode should not change frequency and duty cycle. */
+static void test_oneshot(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    int module = pwm_module_index(td->module);
+    int pwm = pwm_index(td->pwm);
+    uint32_t ppr, csr, pcr;
+    int i, j;
+
+    pcr = CH_EN;
+    for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) {
+        ppr = ppr_list[i];
+        pwm_write_ppr(qts, td, ppr);
+
+        for (j = 0; j < ARRAY_SIZE(csr_list); ++j) {
+            csr = csr_list[j];
+            pwm_write_csr(qts, td, csr);
+            pwm_write_pcr(qts, td, pcr);
+
+            g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr);
+            g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr);
+            g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr);
+            g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0);
+            g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0);
+        }
+    }
+
+    qtest_quit(qts);
+}
+
+/* In toggle mode, the PWM generates correct outputs. */
+static void test_toggle(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    int module = pwm_module_index(td->module);
+    int pwm = pwm_index(td->pwm);
+    uint32_t ppr, csr, pcr, cnr, cmr;
+    int i, j, k, l;
+    uint64_t expected_freq, expected_duty;
+
+    pcr = CH_EN | CH_MOD;
+    for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) {
+        ppr = ppr_list[i];
+        pwm_write_ppr(qts, td, ppr);
+
+        for (j = 0; j < ARRAY_SIZE(csr_list); ++j) {
+            csr = csr_list[j];
+            pwm_write_csr(qts, td, csr);
+
+            for (k = 0; k < ARRAY_SIZE(cnr_list); ++k) {
+                cnr = cnr_list[k];
+                pwm_write_cnr(qts, td, cnr);
+
+                for (l = 0; l < ARRAY_SIZE(cmr_list); ++l) {
+                    cmr = cmr_list[l];
+                    pwm_write_cmr(qts, td, cmr);
+                    expected_freq = pwm_compute_freq(qts, ppr, csr, cnr);
+                    expected_duty = pwm_compute_duty(cnr, cmr, false);
+
+                    pwm_write_pcr(qts, td, pcr);
+                    g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr);
+                    g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr);
+                    g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr);
+                    g_assert_cmpuint(pwm_read_cnr(qts, td), ==, cnr);
+                    g_assert_cmpuint(pwm_read_cmr(qts, td), ==, cmr);
+                    g_assert_cmpuint(pwm_get_duty(qts, module, pwm),
+                            ==, expected_duty);
+                    if (expected_duty != 0 && expected_duty != 100) {
+                        /* Duty cycle with 0 or 100 doesn't need frequency. */
+                        g_assert_cmpuint(pwm_get_freq(qts, module, pwm),
+                                ==, expected_freq);
+                    }
+
+                    /* Test inverted mode */
+                    expected_duty = pwm_compute_duty(cnr, cmr, true);
+                    pwm_write_pcr(qts, td, pcr | CH_INV);
+                    g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr | CH_INV);
+                    g_assert_cmpuint(pwm_get_duty(qts, module, pwm),
+                            ==, expected_duty);
+                    if (expected_duty != 0 && expected_duty != 100) {
+                        /* Duty cycle with 0 or 100 doesn't need frequency. */
+                        g_assert_cmpuint(pwm_get_freq(qts, module, pwm),
+                                ==, expected_freq);
+                    }
+
+                }
+            }
+        }
+    }
+
+    qtest_quit(qts);
+}
+
+static void pwm_add_test(const char *name, const TestData* td,
+        GTestDataFunc fn)
+{
+    g_autofree char *full_name = g_strdup_printf(
+            "npcm7xx_pwm/module[%d]/pwm[%d]/%s", pwm_module_index(td->module),
+            pwm_index(td->pwm), name);
+    qtest_add_data_func(full_name, td, fn);
+}
+#define add_test(name, td) pwm_add_test(#name, td, test_##name)
+
+int main(int argc, char **argv)
+{
+    TestData test_data_list[ARRAY_SIZE(pwm_module_list) * ARRAY_SIZE(pwm_list)];
+
+    g_test_init(&argc, &argv, NULL);
+
+    for (int i = 0; i < ARRAY_SIZE(pwm_module_list); ++i) {
+        for (int j = 0; j < ARRAY_SIZE(pwm_list); ++j) {
+            TestData *td = &test_data_list[i * ARRAY_SIZE(pwm_list) + j];
+
+            td->module = &pwm_module_list[i];
+            td->pwm = &pwm_list[j];
+
+            add_test(init, td);
+            add_test(oneshot, td);
+            add_test(toggle, td);
+        }
+    }
+
+    return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \
 qtests_npcm7xx = \
   ['npcm7xx_adc-test',
    'npcm7xx_gpio-test',
+   'npcm7xx_pwm-test',
    'npcm7xx_rng-test',
    'npcm7xx_timer-test',
    'npcm7xx_watchdog_timer-test']
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

A device shouldn't access its parent object which is QOM internal.
Instead it should use type cast for this purporse. This patch fixes this
issue for all NPCM7XX Devices.

Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-7-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/npcm7xx_boards.c | 2 +-
 hw/mem/npcm7xx_mc.c     | 2 +-
 hw/misc/npcm7xx_clk.c   | 2 +-
 hw/misc/npcm7xx_gcr.c   | 2 +-
 hw/misc/npcm7xx_rng.c   | 2 +-
 hw/nvram/npcm7xx_otp.c  | 2 +-
 hw/ssi/npcm7xx_fiu.c    | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/npcm7xx_boards.c
+++ b/hw/arm/npcm7xx_boards.c
@@ -XXX,XX +XXX,XX @@ static NPCM7xxState *npcm7xx_create_soc(MachineState *machine,
                                         uint32_t hw_straps)
 {
     NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_GET_CLASS(machine);
-    MachineClass *mc = &nmc->parent;
+    MachineClass *mc = MACHINE_CLASS(nmc);
     Object *obj;
 
     if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
diff --git a/hw/mem/npcm7xx_mc.c b/hw/mem/npcm7xx_mc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/mem/npcm7xx_mc.c
+++ b/hw/mem/npcm7xx_mc.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_mc_realize(DeviceState *dev, Error **errp)
 
     memory_region_init_io(&s->mmio, OBJECT(s), &npcm7xx_mc_ops, s, "regs",
                           NPCM7XX_MC_REGS_SIZE);
-    sysbus_init_mmio(&s->parent, &s->mmio);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->mmio);
 }
 
 static void npcm7xx_mc_class_init(ObjectClass *klass, void *data)
diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/npcm7xx_clk.c
+++ b/hw/misc/npcm7xx_clk.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj)
 
     memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
                           TYPE_NPCM7XX_CLK, 4 * KiB);
-    sysbus_init_mmio(&s->parent, &s->iomem);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
 }
 
 static int npcm7xx_clk_post_load(void *opaque, int version_id)
diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/npcm7xx_gcr.c
+++ b/hw/misc/npcm7xx_gcr.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_init(Object *obj)
 
     memory_region_init_io(&s->iomem, obj, &npcm7xx_gcr_ops, s,
                           TYPE_NPCM7XX_GCR, 4 * KiB);
-    sysbus_init_mmio(&s->parent, &s->iomem);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
 }
 
 static const VMStateDescription vmstate_npcm7xx_gcr = {
diff --git a/hw/misc/npcm7xx_rng.c b/hw/misc/npcm7xx_rng.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/npcm7xx_rng.c
+++ b/hw/misc/npcm7xx_rng.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_rng_init(Object *obj)
 
     memory_region_init_io(&s->iomem, obj, &npcm7xx_rng_ops, s, "regs",
                           NPCM7XX_RNG_REGS_SIZE);
-    sysbus_init_mmio(&s->parent, &s->iomem);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
 }
 
 static const VMStateDescription vmstate_npcm7xx_rng = {
diff --git a/hw/nvram/npcm7xx_otp.c b/hw/nvram/npcm7xx_otp.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/nvram/npcm7xx_otp.c
+++ b/hw/nvram/npcm7xx_otp.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_otp_realize(DeviceState *dev, Error **errp)
 {
     NPCM7xxOTPClass *oc = NPCM7XX_OTP_GET_CLASS(dev);
     NPCM7xxOTPState *s = NPCM7XX_OTP(dev);
-    SysBusDevice *sbd = &s->parent;
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 
     memset(s->array, 0, sizeof(s->array));
 
diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ssi/npcm7xx_fiu.c
+++ b/hw/ssi/npcm7xx_fiu.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_hold_reset(Object *obj)
 static void npcm7xx_fiu_realize(DeviceState *dev, Error **errp)
 {
     NPCM7xxFIUState *s = NPCM7XX_FIU(dev);
-    SysBusDevice *sbd = &s->parent;
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
     int i;
 
     if (s->cs_count <= 0) {
-- 
2.20.1

From: Roman Bolshakov <r.bolshakov@yadro.com>

ui/cocoa.m:1188:44: warning: 'openFile:' is deprecated: first deprecated in macOS 11.0 - Use -[NSWorkspace openURL:] instead.
      [-Wdeprecated-declarations]
        if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) {
                                           ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSWorkspace.h:350:1: note:
      'openFile:' has been explicitly marked deprecated here
- (BOOL)openFile:(NSString *)fullPath API_DEPRECATED("Use -[NSWorkspace openURL:] instead.", macos(10.0, 11.0));
^

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210102150718.47618-1-r.bolshakov@yadro.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 ui/cocoa.m | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/ui/cocoa.m b/ui/cocoa.m
index XXXXXXX..XXXXXXX 100644
--- a/ui/cocoa.m
+++ b/ui/cocoa.m
@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
     /* Where to look for local files */
     NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"};
     NSString *full_file_path;
+    NSURL *full_file_url;
 
     /* iterate thru the possible paths until the file is found */
     int index;
@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
         full_file_path = [full_file_path stringByDeletingLastPathComponent];
         full_file_path = [NSString stringWithFormat: @"%@/%@%@", full_file_path,
                           path_array[index], filename];
-        if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) {
+        full_file_url = [NSURL fileURLWithPath: full_file_path
+                                   isDirectory: false];
+        if ([[NSWorkspace sharedWorkspace] openURL: full_file_url] == YES) {
             return;
         }
     }
-- 
2.20.1