The big thing in here is RTH's caching-of-tb-flags patchset which should improve TCG performance. thanks -- PMM The following changes since commit 2152e740a8938b3bad73bfe1a01f8b94dab02d41: Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging (2019-10-22 12:03:03 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191022 for you to fetch changes up to 833043a060f7d0e95ded88e61e992466305c0345: hw/arm/digic4: Inline digic4_board_setup_ram() function (2019-10-22 14:21:57 +0100) ---------------------------------------------------------------- target-arm queue: * Fix sign-extension for SMLAL* instructions * aspeed: Add an AST2600 eval board * Various ptimer device conversions to new transaction API * Cache TB flags to avoid expensively recomputing them every time * Add a dummy Samsung SDHCI controller model to exynos4 boards * Minor refactorings of RAM creation for some arm boards ---------------------------------------------------------------- Cédric Le Goater (1): aspeed: Add an AST2600 eval board Guenter Roeck (1): hw/timer/exynos4210_mct: Initialize ptimer before starting it Peter Maydell (7): hw/timer/arm_mptimer.c: Undo accidental rename of arm_mptimer_init() hw/timer/puv3_ost.c: Switch to transaction-based ptimer API hw/timer/sh_timer: Switch to transaction-based ptimer API hw/timer/lm32_timer: Switch to transaction-based ptimer API hw/timer/altera_timer.c: Switch to transaction-based ptimer API hw/watchdog/etraxfs_timer.c: Switch to transaction-based ptimer API hw/m68k/mcf5208.c: Switch to transaction-based ptimer API Philippe Mathieu-Daudé (9): hw/sd/sdhci: Add a comment to distinct the i.MX eSDHC functions hw/sd/sdhci: Add dummy Samsung SDHCI controller hw/arm/exynos4210: Use the Samsung s3c SDHCI controller hw/arm/xilinx_zynq: Use the IEC binary prefix definitions hw/arm/mps2: Use the IEC binary prefix definitions hw/arm/collie: Create the RAM in the board hw/arm/omap2: Create the RAM in the board hw/arm/omap1: Create the RAM in the board hw/arm/digic4: Inline digic4_board_setup_ram() function Richard Henderson (23): target/arm: Fix sign-extension for SMLAL* target/arm: Split out rebuild_hflags_common target/arm: Split out rebuild_hflags_a64 target/arm: Split out rebuild_hflags_common_32 target/arm: Split arm_cpu_data_is_big_endian target/arm: Split out rebuild_hflags_m32 target/arm: Reduce tests vs M-profile in cpu_get_tb_cpu_state target/arm: Split out rebuild_hflags_a32 target/arm: Split out rebuild_hflags_aprofile target/arm: Hoist XSCALE_CPAR, VECLEN, VECSTRIDE in cpu_get_tb_cpu_state target/arm: Simplify set of PSTATE_SS in cpu_get_tb_cpu_state target/arm: Hoist computation of TBFLAG_A32.VFPEN target/arm: Add arm_rebuild_hflags target/arm: Split out arm_mmu_idx_el target/arm: Hoist store to cs_base in cpu_get_tb_cpu_state target/arm: Add HELPER(rebuild_hflags_{a32, a64, m32}) target/arm: Rebuild hflags at EL changes target/arm: Rebuild hflags at MSR writes target/arm: Rebuild hflags at CPSR writes target/arm: Rebuild hflags at Xscale SCTLR writes target/arm: Rebuild hflags for M-profile target/arm: Rebuild hflags for M-profile NVIC target/arm: Rely on hflags correct in cpu_get_tb_cpu_state hw/arm/strongarm.h | 4 +- include/hw/arm/aspeed.h | 1 + include/hw/arm/omap.h | 10 +- include/hw/sd/sdhci.h | 2 + target/arm/cpu.h | 84 ++++++---- target/arm/helper.h | 4 + target/arm/internals.h | 9 ++ hw/arm/aspeed.c | 23 +++ hw/arm/collie.c | 8 +- hw/arm/digic_boards.c | 9 +- hw/arm/exynos4210.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 3 +- hw/arm/nseries.c | 10 +- hw/arm/omap1.c | 12 +- hw/arm/omap2.c | 13 +- hw/arm/omap_sx1.c | 8 +- hw/arm/palm.c | 8 +- hw/arm/strongarm.c | 7 +- hw/arm/xilinx_zynq.c | 3 +- hw/intc/armv7m_nvic.c | 22 +-- hw/m68k/mcf5208.c | 9 +- hw/sd/sdhci.c | 68 +++++++- hw/timer/altera_timer.c | 13 +- hw/timer/arm_mptimer.c | 4 +- hw/timer/etraxfs_timer.c | 23 +-- hw/timer/exynos4210_mct.c | 2 +- hw/timer/lm32_timer.c | 13 +- hw/timer/puv3_ost.c | 9 +- hw/timer/sh_timer.c | 13 +- linux-user/syscall.c | 1 + target/arm/cpu.c | 1 + target/arm/helper-a64.c | 3 + target/arm/helper.c | 393 +++++++++++++++++++++++++++++---------------- target/arm/m_helper.c | 6 + target/arm/machine.c | 1 + target/arm/op_helper.c | 4 + target/arm/translate-a64.c | 13 +- target/arm/translate.c | 37 ++++- 39 files changed, 588 insertions(+), 270 deletions(-) From: Richard Henderson <richard.henderson@linaro.org> The 32-bit product should be sign-extended, not zero-extended. Fixes: ea96b374641b Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190912183058.17947-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool op_smlaxxx(DisasContext *s, arg_rrrr *a, case 2: tl = load_reg(s, a->ra); th = load_reg(s, a->rd); - t1 = tcg_const_i32(0); + /* Sign-extend the 32-bit product to 64 bits. */ + t1 = tcg_temp_new_i32(); + tcg_gen_sari_i32(t1, t0, 31); tcg_gen_add2_i32(tl, th, tl, th, t0, t1); tcg_temp_free_i32(t0); tcg_temp_free_i32(t1); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Define the board with 1 GiB of RAM but some boards can have up to 2 GiB. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20191016090745.15334-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed.h | 1 + hw/arm/aspeed.c | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardConfig { const char *desc; const char *soc_name; uint32_t hw_strap1; + uint32_t hw_strap2; const char *fmc_model; const char *spi_model; uint32_t num_cs; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedBoardState { /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 +/* AST2600 evb hardware value */ +#define AST2600_EVB_HW_STRAP1 0x000000C0 +#define AST2600_EVB_HW_STRAP2 0x00000003 + /* * The max ram region is for firmwares that scan the address space * with load/store to guess how much RAM the SoC has. @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1", &error_abort); + object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap2, "hw-strap2", + &error_abort); object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs", &error_abort); object_property_set_int(OBJECT(&bmc->soc), machine->smp.cpus, "num-cpus", @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } +static void ast2600_evb_i2c_init(AspeedBoardState *bmc) +{ + /* Start with some devices on our I2C busses */ + ast2500_evb_i2c_init(bmc); +} + static void romulus_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .num_cs = 2, .i2c_init = witherspoon_bmc_i2c_init, .ram = 512 * MiB, + }, { + .name = MACHINE_TYPE_NAME("ast2600-evb"), + .desc = "Aspeed AST2600 EVB (Cortex A7)", + .soc_name = "ast2600-a0", + .hw_strap1 = AST2600_EVB_HW_STRAP1, + .hw_strap2 = AST2600_EVB_HW_STRAP2, + .fmc_model = "w25q512jv", + .spi_model = "mx66u51235f", + .num_cs = 1, + .i2c_init = ast2600_evb_i2c_init, + .ram = 1 * GiB, }, }; -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> When booting a recent Linux kernel, the qemu message "Timer with delta zero, disabling" is seen, apparently because a ptimer is started before being initialized. Fix the problem by initializing the offending ptimer before starting it. The bug is effectively harmless in the old QEMUBH setup because the sequence of events is: * the delta zero means the timer expires immediately * ptimer_reload() arranges for exynos4210_gfrc_event() to be called * ptimer_reload() notices the zero delta and disables the timer * later, the QEMUBH runs, and exynos4210_gfrc_event() correctly configures the timer and restarts it In the new transaction based API the bug is still harmless, but differences of when the callback function runs mean the message is not printed any more: * ptimer_run() does nothing as it's inside a transaction block * ptimer_transaction_commit() sees it has work to do and calls ptimer_reload() * the zero delta means the timer expires immediately * ptimer_reload() calls exynos4210_gfrc_event() directly * exynos4210_gfrc_event() configures the timer * the delta is no longer zero so ptimer_reload() doesn't complain (the zero-delta test is after the trigger-callback in the ptimer_reload() function) Regardless, the behaviour here was not intentional, and we should just program the ptimer correctly to start with. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20191018143149.9216-1-peter.maydell@linaro.org [PMM: Expansion/clarification of the commit message: the message is about a zero delta, not a zero period; added detail to the commit message of the analysis of what is happening and why the kernel boots even with the message; added note that the message goes away with the new ptimer API] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, /* Start FRC if transition from disabled to enabled */ if ((value & G_TCON_TIMER_ENABLE) > (old_val & G_TCON_TIMER_ENABLE)) { - exynos4210_gfrc_start(&s->g_timer); + exynos4210_gfrc_restart(s); } if ((value & G_TCON_TIMER_ENABLE) < (old_val & G_TCON_TIMER_ENABLE)) { -- 2.20.1 In commit b01422622b we did an automated rename of the ptimer_init() function to ptimer_init_with_bh(). Unfortunately this caught the unrelated arm_mptimer_init() function. Undo that accidental renaming. Fixes: b01422622b7c7293196fdaf1dbb4f495af44ecf9 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017133331.5901-1-peter.maydell@linaro.org --- hw/timer/arm_mptimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/timer/arm_mptimer.c b/hw/timer/arm_mptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/arm_mptimer.c +++ b/hw/timer/arm_mptimer.c @@ -XXX,XX +XXX,XX @@ static void arm_mptimer_reset(DeviceState *dev) } } -static void arm_mptimer_init_with_bh(Object *obj) +static void arm_mptimer_init(Object *obj) { ARMMPTimerState *s = ARM_MPTIMER(obj); @@ -XXX,XX +XXX,XX @@ static const TypeInfo arm_mptimer_info = { .name = TYPE_ARM_MPTIMER, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(ARMMPTimerState), - .instance_init = arm_mptimer_init_with_bh, + .instance_init = arm_mptimer_init, .class_init = arm_mptimer_class_init, }; -- 2.20.1 Switch the puv3_ost code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-2-peter.maydell@linaro.org --- hw/timer/puv3_ost.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/hw/timer/puv3_ost.c b/hw/timer/puv3_ost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/puv3_ost.c +++ b/hw/timer/puv3_ost.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/ptimer.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #undef DEBUG_PUV3 @@ -XXX,XX +XXX,XX @@ typedef struct PUV3OSTState { SysBusDevice parent_obj; MemoryRegion iomem; - QEMUBH *bh; qemu_irq irq; ptimer_state *ptimer; @@ -XXX,XX +XXX,XX @@ static void puv3_ost_write(void *opaque, hwaddr offset, DPRINTF("offset 0x%x, value 0x%x\n", offset, value); switch (offset) { case 0x00: /* Match Register 0 */ + ptimer_transaction_begin(s->ptimer); s->reg_OSMR0 = value; if (s->reg_OSMR0 > s->reg_OSCR) { ptimer_set_count(s->ptimer, s->reg_OSMR0 - s->reg_OSCR); @@ -XXX,XX +XXX,XX @@ static void puv3_ost_write(void *opaque, hwaddr offset, (0xffffffff - s->reg_OSCR)); } ptimer_run(s->ptimer, 2); + ptimer_transaction_commit(s->ptimer); break; case 0x14: /* Status Register */ assert(value == 0); @@ -XXX,XX +XXX,XX @@ static void puv3_ost_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq); - s->bh = qemu_bh_new(puv3_ost_tick, s); - s->ptimer = ptimer_init_with_bh(s->bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init(puv3_ost_tick, s, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(s->ptimer); ptimer_set_freq(s->ptimer, 50 * 1000 * 1000); + ptimer_transaction_commit(s->ptimer); memory_region_init_io(&s->iomem, OBJECT(s), &puv3_ost_ops, s, "puv3_ost", PUV3_REGS_OFFSET); -- 2.20.1 Switch the sh_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-3-peter.maydell@linaro.org --- hw/timer/sh_timer.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/timer/sh_timer.c b/hw/timer/sh_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/sh_timer.c +++ b/hw/timer/sh_timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/sh4/sh.h" #include "qemu/timer.h" -#include "qemu/main-loop.h" #include "hw/ptimer.h" //#define DEBUG_TIMER @@ -XXX,XX +XXX,XX @@ static void sh_timer_write(void *opaque, hwaddr offset, switch (offset >> 2) { case OFFSET_TCOR: s->tcor = value; + ptimer_transaction_begin(s->timer); ptimer_set_limit(s->timer, s->tcor, 0); + ptimer_transaction_commit(s->timer); break; case OFFSET_TCNT: s->tcnt = value; + ptimer_transaction_begin(s->timer); ptimer_set_count(s->timer, s->tcnt); + ptimer_transaction_commit(s->timer); break; case OFFSET_TCR: + ptimer_transaction_begin(s->timer); if (s->enabled) { /* Pause the timer if it is running. This may cause some inaccuracy dure to rounding, but avoids a whole lot of other @@ -XXX,XX +XXX,XX @@ static void sh_timer_write(void *opaque, hwaddr offset, /* Restart the timer if still enabled. */ ptimer_run(s->timer, 0); } + ptimer_transaction_commit(s->timer); break; case OFFSET_TCPR: if (s->feat & TIMER_FEAT_CAPT) { @@ -XXX,XX +XXX,XX @@ static void sh_timer_start_stop(void *opaque, int enable) printf("sh_timer_start_stop %d (%d)\n", enable, s->enabled); #endif + ptimer_transaction_begin(s->timer); if (s->enabled && !enable) { ptimer_stop(s->timer); } if (!s->enabled && enable) { ptimer_run(s->timer, 0); } + ptimer_transaction_commit(s->timer); s->enabled = !!enable; #ifdef DEBUG_TIMER @@ -XXX,XX +XXX,XX @@ static void sh_timer_tick(void *opaque) static void *sh_timer_init(uint32_t freq, int feat, qemu_irq irq) { sh_timer_state *s; - QEMUBH *bh; s = (sh_timer_state *)g_malloc0(sizeof(sh_timer_state)); s->freq = freq; @@ -XXX,XX +XXX,XX @@ static void *sh_timer_init(uint32_t freq, int feat, qemu_irq irq) s->enabled = 0; s->irq = irq; - bh = qemu_bh_new(sh_timer_tick, s); - s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init(sh_timer_tick, s, PTIMER_POLICY_DEFAULT); sh_timer_write(s, OFFSET_TCOR >> 2, s->tcor); sh_timer_write(s, OFFSET_TCNT >> 2, s->tcnt); -- 2.20.1 Switch the lm32_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the ytimer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-4-peter.maydell@linaro.org --- hw/timer/lm32_timer.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/timer/lm32_timer.c b/hw/timer/lm32_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/lm32_timer.c +++ b/hw/timer/lm32_timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/ptimer.h" #include "hw/qdev-properties.h" #include "qemu/error-report.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #define DEFAULT_FREQUENCY (50*1000000) @@ -XXX,XX +XXX,XX @@ struct LM32TimerState { MemoryRegion iomem; - QEMUBH *bh; ptimer_state *ptimer; qemu_irq irq; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, s->regs[R_SR] &= ~SR_TO; break; case R_CR: + ptimer_transaction_begin(s->ptimer); s->regs[R_CR] = value; if (s->regs[R_CR] & CR_START) { ptimer_run(s->ptimer, 1); @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, if (s->regs[R_CR] & CR_STOP) { ptimer_stop(s->ptimer); } + ptimer_transaction_commit(s->ptimer); break; case R_PERIOD: s->regs[R_PERIOD] = value; + ptimer_transaction_begin(s->ptimer); ptimer_set_count(s->ptimer, value); + ptimer_transaction_commit(s->ptimer); break; case R_SNAPSHOT: error_report("lm32_timer: write access to read only register 0x" @@ -XXX,XX +XXX,XX @@ static void timer_reset(DeviceState *d) for (i = 0; i < R_MAX; i++) { s->regs[i] = 0; } + ptimer_transaction_begin(s->ptimer); ptimer_stop(s->ptimer); + ptimer_transaction_commit(s->ptimer); } static void lm32_timer_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void lm32_timer_realize(DeviceState *dev, Error **errp) { LM32TimerState *s = LM32_TIMER(dev); - s->bh = qemu_bh_new(timer_hit, s); - s->ptimer = ptimer_init_with_bh(s->bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init(timer_hit, s, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(s->ptimer); ptimer_set_freq(s->ptimer, s->freq_hz); + ptimer_transaction_commit(s->ptimer); } static const VMStateDescription vmstate_lm32_timer = { -- 2.20.1 Switch the altera_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-6-peter.maydell@linaro.org --- hw/timer/altera_timer.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/timer/altera_timer.c b/hw/timer/altera_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/altera_timer.c +++ b/hw/timer/altera_timer.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qapi/error.h" @@ -XXX,XX +XXX,XX @@ typedef struct AlteraTimer { MemoryRegion mmio; qemu_irq irq; uint32_t freq_hz; - QEMUBH *bh; ptimer_state *ptimer; uint32_t regs[R_MAX]; } AlteraTimer; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, break; case R_CONTROL: + ptimer_transaction_begin(t->ptimer); t->regs[R_CONTROL] = value & (CONTROL_ITO | CONTROL_CONT); if ((value & CONTROL_START) && !(t->regs[R_STATUS] & STATUS_RUN)) { @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, ptimer_stop(t->ptimer); t->regs[R_STATUS] &= ~STATUS_RUN; } + ptimer_transaction_commit(t->ptimer); break; case R_PERIODL: case R_PERIODH: + ptimer_transaction_begin(t->ptimer); t->regs[addr] = value & 0xFFFF; if (t->regs[R_STATUS] & STATUS_RUN) { ptimer_stop(t->ptimer); @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, } tvalue = (t->regs[R_PERIODH] << 16) | t->regs[R_PERIODL]; ptimer_set_limit(t->ptimer, tvalue + 1, 1); + ptimer_transaction_commit(t->ptimer); break; case R_SNAPL: @@ -XXX,XX +XXX,XX @@ static void altera_timer_realize(DeviceState *dev, Error **errp) return; } - t->bh = qemu_bh_new(timer_hit, t); - t->ptimer = ptimer_init_with_bh(t->bh, PTIMER_POLICY_DEFAULT); + t->ptimer = ptimer_init(timer_hit, t, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(t->ptimer); ptimer_set_freq(t->ptimer, t->freq_hz); + ptimer_transaction_commit(t->ptimer); memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t, TYPE_ALTERA_TIMER, R_MAX * sizeof(uint32_t)); @@ -XXX,XX +XXX,XX @@ static void altera_timer_reset(DeviceState *dev) { AlteraTimer *t = ALTERA_TIMER(dev); + ptimer_transaction_begin(t->ptimer); ptimer_stop(t->ptimer); ptimer_set_limit(t->ptimer, 0xffffffff, 1); + ptimer_transaction_commit(t->ptimer); memset(t->regs, 0, sizeof(t->regs)); } -- 2.20.1 Switch the etraxfs_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-7-peter.maydell@linaro.org --- hw/timer/etraxfs_timer.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/hw/timer/etraxfs_timer.c b/hw/timer/etraxfs_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/etraxfs_timer.c +++ b/hw/timer/etraxfs_timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "sysemu/reset.h" #include "sysemu/runstate.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qemu/timer.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ typedef struct ETRAXTimerState { qemu_irq irq; qemu_irq nmi; - QEMUBH *bh_t0; - QEMUBH *bh_t1; - QEMUBH *bh_wd; ptimer_state *ptimer_t0; ptimer_state *ptimer_t1; ptimer_state *ptimer_wd; @@ -XXX,XX +XXX,XX @@ static void update_ctrl(ETRAXTimerState *t, int tnum) } D(printf ("freq_hz=%d div=%d\n", freq_hz, div)); + ptimer_transaction_begin(timer); ptimer_set_freq(timer, freq_hz); ptimer_set_limit(timer, div, 0); @@ -XXX,XX +XXX,XX @@ static void update_ctrl(ETRAXTimerState *t, int tnum) abort(); break; } + ptimer_transaction_commit(timer); } static void timer_update_irq(ETRAXTimerState *t) @@ -XXX,XX +XXX,XX @@ static inline void timer_watchdog_update(ETRAXTimerState *t, uint32_t value) t->wd_hits = 0; + ptimer_transaction_begin(t->ptimer_wd); ptimer_set_freq(t->ptimer_wd, 760); if (wd_cnt == 0) wd_cnt = 256; @@ -XXX,XX +XXX,XX @@ static inline void timer_watchdog_update(ETRAXTimerState *t, uint32_t value) ptimer_stop(t->ptimer_wd); t->rw_wd_ctrl = value; + ptimer_transaction_commit(t->ptimer_wd); } static void @@ -XXX,XX +XXX,XX @@ static void etraxfs_timer_reset(void *opaque) { ETRAXTimerState *t = opaque; + ptimer_transaction_begin(t->ptimer_t0); ptimer_stop(t->ptimer_t0); + ptimer_transaction_commit(t->ptimer_t0); + ptimer_transaction_begin(t->ptimer_t1); ptimer_stop(t->ptimer_t1); + ptimer_transaction_commit(t->ptimer_t1); + ptimer_transaction_begin(t->ptimer_wd); ptimer_stop(t->ptimer_wd); + ptimer_transaction_commit(t->ptimer_wd); t->rw_wd_ctrl = 0; t->r_intr = 0; t->rw_intr_mask = 0; @@ -XXX,XX +XXX,XX @@ static void etraxfs_timer_realize(DeviceState *dev, Error **errp) ETRAXTimerState *t = ETRAX_TIMER(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - t->bh_t0 = qemu_bh_new(timer0_hit, t); - t->bh_t1 = qemu_bh_new(timer1_hit, t); - t->bh_wd = qemu_bh_new(watchdog_hit, t); - t->ptimer_t0 = ptimer_init_with_bh(t->bh_t0, PTIMER_POLICY_DEFAULT); - t->ptimer_t1 = ptimer_init_with_bh(t->bh_t1, PTIMER_POLICY_DEFAULT); - t->ptimer_wd = ptimer_init_with_bh(t->bh_wd, PTIMER_POLICY_DEFAULT); + t->ptimer_t0 = ptimer_init(timer0_hit, t, PTIMER_POLICY_DEFAULT); + t->ptimer_t1 = ptimer_init(timer1_hit, t, PTIMER_POLICY_DEFAULT); + t->ptimer_wd = ptimer_init(watchdog_hit, t, PTIMER_POLICY_DEFAULT); sysbus_init_irq(sbd, &t->irq); sysbus_init_irq(sbd, &t->nmi); -- 2.20.1 Switch the mcf5208 code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Thomas Huth <huth@tuxfamily.org> Message-id: 20191017132905.5604-9-peter.maydell@linaro.org --- hw/m68k/mcf5208.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c index XXXXXXX..XXXXXXX 100644 --- a/hw/m68k/mcf5208.c +++ b/hw/m68k/mcf5208.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "qemu/error-report.h" -#include "qemu/main-loop.h" #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void m5208_timer_write(void *opaque, hwaddr offset, return; } + ptimer_transaction_begin(s->timer); if (s->pcsr & PCSR_EN) ptimer_stop(s->timer); @@ -XXX,XX +XXX,XX @@ static void m5208_timer_write(void *opaque, hwaddr offset, if (s->pcsr & PCSR_EN) ptimer_run(s->timer, 0); + ptimer_transaction_commit(s->timer); break; case 2: + ptimer_transaction_begin(s->timer); s->pmr = value; s->pcsr &= ~PCSR_PIF; if ((s->pcsr & PCSR_RLD) == 0) { @@ -XXX,XX +XXX,XX @@ static void m5208_timer_write(void *opaque, hwaddr offset, } else { ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW); } + ptimer_transaction_commit(s->timer); break; case 4: break; @@ -XXX,XX +XXX,XX @@ static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic) { MemoryRegion *iomem = g_new(MemoryRegion, 1); m5208_timer_state *s; - QEMUBH *bh; int i; /* SDRAMC. */ @@ -XXX,XX +XXX,XX @@ static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic) /* Timers. */ for (i = 0; i < 2; i++) { s = g_new0(m5208_timer_state, 1); - bh = qemu_bh_new(m5208_timer_trigger, s); - s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init(m5208_timer_trigger, s, PTIMER_POLICY_DEFAULT); memory_region_init_io(&s->iomem, NULL, &m5208_timer_ops, s, "m5208-timer", 0x00004000); memory_region_add_subregion(address_space, 0xfc080000 + 0x4000 * i, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_ANY bits that will be cached. For now, the env->hflags variable is not used, and the results are fed back to cpu_get_tb_cpu_state. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 29 ++++++++++++++++++----------- target/arm/helper.c | 26 +++++++++++++++++++------- 2 files changed, 37 insertions(+), 18 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t pstate; uint32_t aarch64; /* 1 if CPU is in aarch64 state; inverse of PSTATE.nRW */ + /* Cached TBFLAGS state. See below for which bits are included. */ + uint32_t hflags; + /* Frequently accessed CPSR bits are stored separately for efficiency. This contains all the other bits. Use cpsr_{read,write} to access the whole CPSR. */ @@ -XXX,XX +XXX,XX @@ typedef ARMCPU ArchCPU; #include "exec/cpu-all.h" -/* Bit usage in the TB flags field: bit 31 indicates whether we are +/* + * Bit usage in the TB flags field: bit 31 indicates whether we are * in 32 or 64 bit mode. The meaning of the other bits depends on that. * We put flags which are shared between 32 and 64 bit mode at the top * of the word, and flags which apply to only one mode at the bottom. + * + * Unless otherwise noted, these bits are cached in env->hflags. */ FIELD(TBFLAG_ANY, AARCH64_STATE, 31, 1) FIELD(TBFLAG_ANY, MMUIDX, 28, 3) FIELD(TBFLAG_ANY, SS_ACTIVE, 27, 1) -FIELD(TBFLAG_ANY, PSTATE_SS, 26, 1) +FIELD(TBFLAG_ANY, PSTATE_SS, 26, 1) /* Not cached. */ /* Target EL if we take a floating-point-disabled exception */ FIELD(TBFLAG_ANY, FPEXC_EL, 24, 2) FIELD(TBFLAG_ANY, BE_DATA, 23, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 21, 2) /* Bit usage when in AArch32 state: */ -FIELD(TBFLAG_A32, THUMB, 0, 1) -FIELD(TBFLAG_A32, VECLEN, 1, 3) -FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +FIELD(TBFLAG_A32, THUMB, 0, 1) /* Not cached. */ +FIELD(TBFLAG_A32, VECLEN, 1, 3) /* Not cached. */ +FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) /* Not cached. */ /* * We store the bottom two bits of the CPAR as TB flags and handle * checks on the other bits at runtime. This shares the same bits as * VECSTRIDE, which is OK as no XScale CPU has VFP. + * Not cached, because VECLEN+VECSTRIDE are not cached. */ FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) * the same thing as the current security state of the processor! */ FIELD(TBFLAG_A32, NS, 6, 1) -FIELD(TBFLAG_A32, VFPEN, 7, 1) -FIELD(TBFLAG_A32, CONDEXEC, 8, 8) +FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Not cached. */ +FIELD(TBFLAG_A32, CONDEXEC, 8, 8) /* Not cached. */ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) /* For M profile only, set if FPCCR.LSPACT is set */ -FIELD(TBFLAG_A32, LSPACT, 18, 1) +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* Not cached. */ /* For M profile only, set if we must create a new FP context */ -FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* Not cached. */ /* For M profile only, set if FPCCR.S does not match current security state */ -FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* Not cached. */ /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, SVEEXC_EL, 2, 2) FIELD(TBFLAG_A64, ZCR_LEN, 4, 4) FIELD(TBFLAG_A64, PAUTH_ACTIVE, 8, 1) FIELD(TBFLAG_A64, BT, 9, 1) -FIELD(TBFLAG_A64, BTYPE, 10, 2) +FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */ FIELD(TBFLAG_A64, TBID, 12, 2) static inline bool bswap_code(bool sctlr_b) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) } #endif +static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx, uint32_t flags) +{ + flags = FIELD_DP32(flags, TBFLAG_ANY, FPEXC_EL, fp_el); + flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, + arm_to_core_mmu_idx(mmu_idx)); + + if (arm_cpu_data_is_big_endian(env)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); + } + if (arm_singlestep_active(env)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1); + } + return flags; +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } - flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); + flags = rebuild_hflags_common(env, fp_el, mmu_idx, flags); /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, * 0 x Inactive (the TB flag for SS is always 0) * 1 0 Active-pending * 1 1 Active-not-pending + * SS_ACTIVE is set in hflags; PSTATE_SS is computed every TB. */ - if (arm_singlestep_active(env)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1); + if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE)) { if (is_a64(env)) { if (env->pstate & PSTATE_SS) { flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } } - if (arm_cpu_data_is_big_endian(env)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); - } - flags = FIELD_DP32(flags, TBFLAG_ANY, FPEXC_EL, fp_el); if (arm_v7m_is_handler_mode(env)) { flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_A64 bits that will be cached. For now, the env->hflags variable is not used, and the results are fed back to cpu_get_tb_cpu_state. Note that not all BTI related flags are cached, so we have to test the BTI feature twice -- once for those bits moved out to rebuild_hflags_a64 and once for those bits that remain in cpu_get_tb_cpu_state. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 131 +++++++++++++++++++++++--------------------- 1 file changed, 69 insertions(+), 62 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, return flags; } +static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, + ARMMMUIdx mmu_idx) +{ + ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); + ARMVAParameters p0 = aa64_va_parameters_both(env, 0, stage1); + uint32_t flags = 0; + uint64_t sctlr; + int tbii, tbid; + + flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1); + + /* FIXME: ARMv8.1-VHE S2 translation regime. */ + if (regime_el(env, stage1) < 2) { + ARMVAParameters p1 = aa64_va_parameters_both(env, -1, stage1); + tbid = (p1.tbi << 1) | p0.tbi; + tbii = tbid & ~((p1.tbid << 1) | p0.tbid); + } else { + tbid = p0.tbi; + tbii = tbid & !p0.tbid; + } + + flags = FIELD_DP32(flags, TBFLAG_A64, TBII, tbii); + flags = FIELD_DP32(flags, TBFLAG_A64, TBID, tbid); + + if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { + int sve_el = sve_exception_el(env, el); + uint32_t zcr_len; + + /* + * If SVE is disabled, but FP is enabled, + * then the effective len is 0. + */ + if (sve_el != 0 && fp_el == 0) { + zcr_len = 0; + } else { + zcr_len = sve_zcr_len_for_el(env, el); + } + flags = FIELD_DP32(flags, TBFLAG_A64, SVEEXC_EL, sve_el); + flags = FIELD_DP32(flags, TBFLAG_A64, ZCR_LEN, zcr_len); + } + + sctlr = arm_sctlr(env, el); + + if (cpu_isar_feature(aa64_pauth, env_archcpu(env))) { + /* + * In order to save space in flags, we record only whether + * pauth is "inactive", meaning all insns are implemented as + * a nop, or "active" when some action must be performed. + * The decision of which action to take is left to a helper. + */ + if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) { + flags = FIELD_DP32(flags, TBFLAG_A64, PAUTH_ACTIVE, 1); + } + } + + if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { + /* Note that SCTLR_EL[23].BT == SCTLR_BT1. */ + if (sctlr & (el == 0 ? SCTLR_BT0 : SCTLR_BT1)) { + flags = FIELD_DP32(flags, TBFLAG_A64, BT, 1); + } + } + + return rebuild_hflags_common(env, fp_el, mmu_idx, flags); +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, uint32_t flags = 0; if (is_a64(env)) { - ARMCPU *cpu = env_archcpu(env); - uint64_t sctlr; - *pc = env->pc; - flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1); - - /* Get control bits for tagged addresses. */ - { - ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); - ARMVAParameters p0 = aa64_va_parameters_both(env, 0, stage1); - int tbii, tbid; - - /* FIXME: ARMv8.1-VHE S2 translation regime. */ - if (regime_el(env, stage1) < 2) { - ARMVAParameters p1 = aa64_va_parameters_both(env, -1, stage1); - tbid = (p1.tbi << 1) | p0.tbi; - tbii = tbid & ~((p1.tbid << 1) | p0.tbid); - } else { - tbid = p0.tbi; - tbii = tbid & !p0.tbid; - } - - flags = FIELD_DP32(flags, TBFLAG_A64, TBII, tbii); - flags = FIELD_DP32(flags, TBFLAG_A64, TBID, tbid); - } - - if (cpu_isar_feature(aa64_sve, cpu)) { - int sve_el = sve_exception_el(env, current_el); - uint32_t zcr_len; - - /* If SVE is disabled, but FP is enabled, - * then the effective len is 0. - */ - if (sve_el != 0 && fp_el == 0) { - zcr_len = 0; - } else { - zcr_len = sve_zcr_len_for_el(env, current_el); - } - flags = FIELD_DP32(flags, TBFLAG_A64, SVEEXC_EL, sve_el); - flags = FIELD_DP32(flags, TBFLAG_A64, ZCR_LEN, zcr_len); - } - - sctlr = arm_sctlr(env, current_el); - - if (cpu_isar_feature(aa64_pauth, cpu)) { - /* - * In order to save space in flags, we record only whether - * pauth is "inactive", meaning all insns are implemented as - * a nop, or "active" when some action must be performed. - * The decision of which action to take is left to a helper. - */ - if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) { - flags = FIELD_DP32(flags, TBFLAG_A64, PAUTH_ACTIVE, 1); - } - } - - if (cpu_isar_feature(aa64_bti, cpu)) { - /* Note that SCTLR_EL[23].BT == SCTLR_BT1. */ - if (sctlr & (current_el == 0 ? SCTLR_BT0 : SCTLR_BT1)) { - flags = FIELD_DP32(flags, TBFLAG_A64, BT, 1); - } + flags = rebuild_hflags_a64(env, current_el, fp_el, mmu_idx); + if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); } } else { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); } - } - flags = rebuild_hflags_common(env, fp_el, mmu_idx, flags); + flags = rebuild_hflags_common(env, fp_el, mmu_idx, flags); + } /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_A32 bits that will be cached, and are used by all profiles. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, return flags; } +static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx, uint32_t flags) +{ + flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); + flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); + + return rebuild_hflags_common(env, fp_el, mmu_idx, flags); +} + static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, ARMMMUIdx mmu_idx = arm_mmu_idx(env); int current_el = arm_current_el(env); int fp_el = fp_exception_el(env, current_el); - uint32_t flags = 0; + uint32_t flags; if (is_a64(env)) { *pc = env->pc; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } else { *pc = env->regs[15]; + flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, env->vfp.vec_len); flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride); flags = FIELD_DP32(flags, TBFLAG_A32, CONDEXEC, env->condexec_bits); - flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); - flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); } - - flags = rebuild_hflags_common(env, fp_el, mmu_idx, flags); } /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Set TBFLAG_ANY.BE_DATA in rebuild_hflags_common_32 and rebuild_hflags_a64 instead of rebuild_hflags_common, where we do not need to re-test is_a64() nor re-compute the various inputs. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 49 +++++++++++++++++++++++++++------------------ target/arm/helper.c | 16 +++++++++++---- 2 files changed, 42 insertions(+), 23 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t arm_sctlr(CPUARMState *env, int el) } } +static inline bool arm_cpu_data_is_big_endian_a32(CPUARMState *env, + bool sctlr_b) +{ +#ifdef CONFIG_USER_ONLY + /* + * In system mode, BE32 is modelled in line with the + * architecture (as word-invariant big-endianness), where loads + * and stores are done little endian but from addresses which + * are adjusted by XORing with the appropriate constant. So the + * endianness to use for the raw data access is not affected by + * SCTLR.B. + * In user mode, however, we model BE32 as byte-invariant + * big-endianness (because user-only code cannot tell the + * difference), and so we need to use a data access endianness + * that depends on SCTLR.B. + */ + if (sctlr_b) { + return true; + } +#endif + /* In 32bit endianness is determined by looking at CPSR's E bit */ + return env->uncached_cpsr & CPSR_E; +} + +static inline bool arm_cpu_data_is_big_endian_a64(int el, uint64_t sctlr) +{ + return sctlr & (el ? SCTLR_EE : SCTLR_E0E); +} /* Return true if the processor is in big-endian mode. */ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) { - /* In 32bit endianness is determined by looking at CPSR's E bit */ if (!is_a64(env)) { - return -#ifdef CONFIG_USER_ONLY - /* In system mode, BE32 is modelled in line with the - * architecture (as word-invariant big-endianness), where loads - * and stores are done little endian but from addresses which - * are adjusted by XORing with the appropriate constant. So the - * endianness to use for the raw data access is not affected by - * SCTLR.B. - * In user mode, however, we model BE32 as byte-invariant - * big-endianness (because user-only code cannot tell the - * difference), and so we need to use a data access endianness - * that depends on SCTLR.B. - */ - arm_sctlr_b(env) || -#endif - ((env->uncached_cpsr & CPSR_E) ? 1 : 0); + return arm_cpu_data_is_big_endian_a32(env, arm_sctlr_b(env)); } else { int cur_el = arm_current_el(env); uint64_t sctlr = arm_sctlr(env, cur_el); - - return (sctlr & (cur_el ? SCTLR_EE : SCTLR_E0E)) != 0; + return arm_cpu_data_is_big_endian_a64(cur_el, sctlr); } } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); - if (arm_cpu_data_is_big_endian(env)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); - } if (arm_singlestep_active(env)) { flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1); } @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx, uint32_t flags) { - flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); + bool sctlr_b = arm_sctlr_b(env); + + if (sctlr_b) { + flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, 1); + } + if (arm_cpu_data_is_big_endian_a32(env, sctlr_b)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); + } flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); return rebuild_hflags_common(env, fp_el, mmu_idx, flags); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, sctlr = arm_sctlr(env, el); + if (arm_cpu_data_is_big_endian_a64(el, sctlr)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); + } + if (cpu_isar_feature(aa64_pauth, env_archcpu(env))) { /* * In order to save space in flags, we record only whether -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_A32 bits that will be cached, and are used by M-profile. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 45 ++++++++++++++++++++++++++++++--------------- 1 file changed, 30 insertions(+), 15 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, return rebuild_hflags_common(env, fp_el, mmu_idx, flags); } +static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx) +{ + uint32_t flags = 0; + + if (arm_v7m_is_handler_mode(env)) { + flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1); + } + + /* + * v8M always applies stack limit checks unless CCR.STKOFHFNMIGN + * is suppressing them because the requested execution priority + * is less than 0. + */ + if (arm_feature(env, ARM_FEATURE_V8) && + !((mmu_idx & ARM_MMU_IDX_M_NEGPRI) && + (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKOFHFNMIGN_MASK))) { + flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); + } + + return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); +} + static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } else { *pc = env->regs[15]; - flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); + + if (arm_feature(env, ARM_FEATURE_M)) { + flags = rebuild_hflags_m32(env, fp_el, mmu_idx); + } else { + flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); + } + flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, env->vfp.vec_len); flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride); @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } - if (arm_v7m_is_handler_mode(env)) { - flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1); - } - - /* v8M always applies stack limit checks unless CCR.STKOFHFNMIGN is - * suppressing them because the requested execution priority is less than 0. - */ - if (arm_feature(env, ARM_FEATURE_V8) && - arm_feature(env, ARM_FEATURE_M) && - !((mmu_idx & ARM_MMU_IDX_M_NEGPRI) && - (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKOFHFNMIGN_MASK))) { - flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); - } - if (arm_feature(env, ARM_FEATURE_M_SECURITY) && FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Hoist the computation of some TBFLAG_A32 bits that only apply to M-profile under a single test for ARM_FEATURE_M. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 49 +++++++++++++++++++++------------------------ 1 file changed, 23 insertions(+), 26 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, if (arm_feature(env, ARM_FEATURE_M)) { flags = rebuild_hflags_m32(env, fp_el, mmu_idx); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) + != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + + if ((env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no + * active FP context; we must create a new FP context before + * executing any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } } else { flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); } @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } - if (arm_feature(env, ARM_FEATURE_M_SECURITY) && - FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { - flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); - } - - if (arm_feature(env, ARM_FEATURE_M) && - (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && - (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || - (env->v7m.secure && - !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { - /* - * ASPEN is set, but FPCA/SFPA indicate that there is no active - * FP context; we must create a new FP context before executing - * any FP insn. - */ - flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); - } - - if (arm_feature(env, ARM_FEATURE_M)) { - bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; - - if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { - flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); - } - } - if (!arm_feature(env, ARM_FEATURE_M)) { int target_el = arm_debug_target_el(env); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Currently a trivial wrapper for rebuild_hflags_common_32. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } +static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx) +{ + return rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); +} + static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); } } else { - flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); + flags = rebuild_hflags_a32(env, fp_el, mmu_idx); } flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_ANY bits that will be cached, and are used by A-profile. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } +static uint32_t rebuild_hflags_aprofile(CPUARMState *env) +{ + int flags = 0; + + flags = FIELD_DP32(flags, TBFLAG_ANY, DEBUG_TARGET_EL, + arm_debug_target_el(env)); + return flags; +} + static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx) { - return rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); + uint32_t flags = rebuild_hflags_aprofile(env); + return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { + uint32_t flags = rebuild_hflags_aprofile(env); ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); ARMVAParameters p0 = aa64_va_parameters_both(env, 0, stage1); - uint32_t flags = 0; uint64_t sctlr; int tbii, tbid; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } - if (!arm_feature(env, ARM_FEATURE_M)) { - int target_el = arm_debug_target_el(env); - - flags = FIELD_DP32(flags, TBFLAG_ANY, DEBUG_TARGET_EL, target_el); - } - *pflags = flags; *cs_base = 0; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We do not need to compute any of these values for M-profile. Further, XSCALE_CPAR overlaps VECSTRIDE so obviously the two sets must be mutually exclusive. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } else { flags = rebuild_hflags_a32(env, fp_el, mmu_idx); + + /* + * Note that XSCALE_CPAR shares bits with VECSTRIDE. + * Note that VECLEN+VECSTRIDE are RES0 for M-profile. + */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } else { + flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, + env->vfp.vec_len); + flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, + env->vfp.vec_stride); + } } flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); - flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, env->vfp.vec_len); - flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride); flags = FIELD_DP32(flags, TBFLAG_A32, CONDEXEC, env->condexec_bits); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ - if (arm_feature(env, ARM_FEATURE_XSCALE)) { - flags = FIELD_DP32(flags, TBFLAG_A32, - XSCALE_CPAR, env->cp15.c15_cpar); - } } /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Hoist the variable load for PSTATE into the existing test vs is_a64. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, ARMMMUIdx mmu_idx = arm_mmu_idx(env); int current_el = arm_current_el(env); int fp_el = fp_exception_el(env, current_el); - uint32_t flags; + uint32_t flags, pstate_for_ss; if (is_a64(env)) { *pc = env->pc; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); } + pstate_for_ss = env->pstate; } else { *pc = env->regs[15]; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } + pstate_for_ss = env->uncached_cpsr; } - /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine + /* + * The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: * SS_ACTIVE PSTATE.SS State * 0 x Inactive (the TB flag for SS is always 0) @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, * 1 1 Active-not-pending * SS_ACTIVE is set in hflags; PSTATE_SS is computed every TB. */ - if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE)) { - if (is_a64(env)) { - if (env->pstate & PSTATE_SS) { - flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); - } - } else { - if (env->uncached_cpsr & PSTATE_SS) { - flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); - } - } + if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE) && + (pstate_for_ss & PSTATE_SS)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); } *pflags = flags; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> There are 3 conditions that each enable this flag. M-profile always enables; A-profile with EL1 as AA64 always enables. Both of these conditions can easily be cached. The final condition relies on the FPEXC register which we are not prepared to cache. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- target/arm/helper.c | 14 ++++++++++---- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) * the same thing as the current security state of the processor! */ FIELD(TBFLAG_A32, NS, 6, 1) -FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Not cached. */ +FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Partially cached, minus FPEXC. */ FIELD(TBFLAG_A32, CONDEXEC, 8, 8) /* Not cached. */ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) /* For M profile only, set if FPCCR.LSPACT is set */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, { uint32_t flags = 0; + /* v8M always enables the fpu. */ + flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); + if (arm_v7m_is_handler_mode(env)) { flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1); } @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx) { uint32_t flags = rebuild_hflags_aprofile(env); + + if (arm_el_is_aa64(env, 1)) { + flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); + } return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride); } + if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)) { + flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); + } } flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); flags = FIELD_DP32(flags, TBFLAG_A32, CONDEXEC, env->condexec_bits); - if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { - flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); - } pstate_for_ss = env->uncached_cpsr; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This function assumes nothing about the current state of the cpu, and writes the computed value to env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 ++++++ target/arm/helper.c | 30 ++++++++++++++++++++++-------- 2 files changed, 28 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void *opaque); +/** + * arm_rebuild_hflags: + * Rebuild the cached TBFLAGS for arbitrary changed processor state. + */ +void arm_rebuild_hflags(CPUARMState *env); + /** * aa32_vfp_dreg: * Return a pointer to the Dn register within env in 32-bit mode. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, return rebuild_hflags_common(env, fp_el, mmu_idx, flags); } +static uint32_t rebuild_hflags_internal(CPUARMState *env) +{ + int el = arm_current_el(env); + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx(env); + + if (is_a64(env)) { + return rebuild_hflags_a64(env, el, fp_el, mmu_idx); + } else if (arm_feature(env, ARM_FEATURE_M)) { + return rebuild_hflags_m32(env, fp_el, mmu_idx); + } else { + return rebuild_hflags_a32(env, fp_el, mmu_idx); + } +} + +void arm_rebuild_hflags(CPUARMState *env) +{ + env->hflags = rebuild_hflags_internal(env); +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { - ARMMMUIdx mmu_idx = arm_mmu_idx(env); - int current_el = arm_current_el(env); - int fp_el = fp_exception_el(env, current_el); uint32_t flags, pstate_for_ss; + flags = rebuild_hflags_internal(env); + if (is_a64(env)) { *pc = env->pc; - flags = rebuild_hflags_a64(env, current_el, fp_el, mmu_idx); if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); } @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, *pc = env->regs[15]; if (arm_feature(env, ARM_FEATURE_M)) { - flags = rebuild_hflags_m32(env, fp_el, mmu_idx); - if (arm_feature(env, ARM_FEATURE_M_SECURITY) && FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); } } else { - flags = rebuild_hflags_a32(env, fp_el, mmu_idx); - /* * Note that XSCALE_CPAR shares bits with VECSTRIDE. * Note that VECLEN+VECSTRIDE are RES0 for M-profile. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Avoid calling arm_current_el() twice. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 9 +++++++++ target/arm/helper.c | 12 +++++++----- 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_mmu_idx_el: + * @env: The cpu environment + * @el: The EL to use. + * + * Return the full ARMMMUIdx for the translation regime for EL. + */ +ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el); + /** * arm_mmu_idx: * @env: The cpu environment diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) } #endif -ARMMMUIdx arm_mmu_idx(CPUARMState *env) +ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el) { - int el; - if (arm_feature(env, ARM_FEATURE_M)) { return arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); } - el = arm_current_el(env); if (el < 2 && arm_is_secure_below_el3(env)) { return ARMMMUIdx_S1SE0 + el; } else { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_mmu_idx(CPUARMState *env) } } +ARMMMUIdx arm_mmu_idx(CPUARMState *env) +{ + return arm_mmu_idx_el(env, arm_current_el(env)); +} + int cpu_mmu_index(CPUARMState *env, bool ifetch) { return arm_to_core_mmu_idx(arm_mmu_idx(env)); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_internal(CPUARMState *env) { int el = arm_current_el(env); int fp_el = fp_exception_el(env, el); - ARMMMUIdx mmu_idx = arm_mmu_idx(env); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); if (is_a64(env)) { return rebuild_hflags_a64(env, el, fp_el, mmu_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> By performing this store early, we avoid having to save and restore the register holding the address around any function calls. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, { uint32_t flags, pstate_for_ss; + *cs_base = 0; flags = rebuild_hflags_internal(env); if (is_a64(env)) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } *pflags = flags; - *cs_base = 0; } #ifdef TARGET_AARCH64 -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This functions are given the mode and el state of the cpu and writes the computed value to env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 4 ++++ target/arm/helper.c | 24 ++++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(msr_banked, void, env, i32, i32, i32) DEF_HELPER_2(get_user_reg, i32, env, i32) DEF_HELPER_3(set_user_reg, void, env, i32, i32) +DEF_HELPER_FLAGS_2(rebuild_hflags_m32, TCG_CALL_NO_RWG, void, env, int) +DEF_HELPER_FLAGS_2(rebuild_hflags_a32, TCG_CALL_NO_RWG, void, env, int) +DEF_HELPER_FLAGS_2(rebuild_hflags_a64, TCG_CALL_NO_RWG, void, env, int) + DEF_HELPER_1(vfp_get_fpscr, i32, env) DEF_HELPER_2(vfp_set_fpscr, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_rebuild_hflags(CPUARMState *env) env->hflags = rebuild_hflags_internal(env); } +void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) +{ + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + + env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); +} + +void HELPER(rebuild_hflags_a32)(CPUARMState *env, int el) +{ + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + + env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx); +} + +void HELPER(rebuild_hflags_a64)(CPUARMState *env, int el) +{ + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + + env->hflags = rebuild_hflags_a64(env, el, fp_el, mmu_idx); +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Begin setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/syscall.c | 1 + target/arm/cpu.c | 1 + target/arm/helper-a64.c | 3 +++ target/arm/helper.c | 2 ++ target/arm/machine.c | 1 + target/arm/op_helper.c | 1 + 6 files changed, 9 insertions(+) diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, aarch64_sve_narrow_vq(env, vq); } env->vfp.zcr_el[1] = vq - 1; + arm_rebuild_hflags(env); ret = vq * 16; } return ret; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); + arm_rebuild_hflags(env); } bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) } else { env->regs[15] = new_pc & ~0x3; } + helper_rebuild_hflags_a32(env, new_el); qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch32 EL%d PC 0x%" PRIx32 "\n", cur_el, new_el, env->regs[15]); @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) } aarch64_restore_sp(env, new_el); env->pc = new_pc; + helper_rebuild_hflags_a64(env, new_el); qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch64 EL%d PC 0x%" PRIx64 "\n", cur_el, new_el, env->pc); } + /* * Note that cur_el can never be 0. If new_el is 0, then * el0_a64 is return_to_aa64, else el0_a64 is ignored. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void take_aarch32_exception(CPUARMState *env, int new_mode, env->regs[14] = env->regs[15] + offset; } env->regs[15] = newpc; + arm_rebuild_hflags(env); } static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) pstate_write(env, PSTATE_DAIF | new_mode); env->aarch64 = 1; aarch64_restore_sp(env, new_el); + helper_rebuild_hflags_a64(env, new_el); env->pc = addr; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } + arm_rebuild_hflags(&cpu->env); return 0; } diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(cpsr_write_eret)(CPUARMState *env, uint32_t val) * state. Do the masking now. */ env->regs[15] &= (env->thumb ? ~1 : ~3); + arm_rebuild_hflags(env); qemu_mutex_lock_iothread(); arm_call_el_change_hook(env_archcpu(env)); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 13 +++++++++++-- target/arm/translate.c | 28 +++++++++++++++++++++++----- 2 files changed, 34 insertions(+), 7 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, if ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && (ri->type & ARM_CP_IO)) { /* I/O operations must end the TB here (whether read or write) */ s->base.is_jmp = DISAS_UPDATE; - } else if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { - /* We default to ending the TB on a coprocessor register write, + } + if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { + /* + * A write to any coprocessor regiser that ends a TB + * must rebuild the hflags for the next TB. + */ + TCGv_i32 tcg_el = tcg_const_i32(s->current_el); + gen_helper_rebuild_hflags_a64(cpu_env, tcg_el); + tcg_temp_free_i32(tcg_el); + /* + * We default to ending the TB on a coprocessor register write, * but allow this to be suppressed by the register definition * (usually only necessary to work around guest bugs). */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn) ri = get_arm_cp_reginfo(s->cp_regs, ENCODE_CP_REG(cpnum, is64, s->ns, crn, crm, opc1, opc2)); if (ri) { + bool need_exit_tb; + /* Check access permissions */ if (!cp_access_ok(s->current_el, ri, isread)) { return 1; @@ -XXX,XX +XXX,XX @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn) } } - if ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && (ri->type & ARM_CP_IO)) { - /* I/O operations must end the TB here (whether read or write) */ - gen_lookup_tb(s); - } else if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { - /* We default to ending the TB on a coprocessor register write, + /* I/O operations must end the TB here (whether read or write) */ + need_exit_tb = ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && + (ri->type & ARM_CP_IO)); + + if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { + /* + * A write to any coprocessor regiser that ends a TB + * must rebuild the hflags for the next TB. + */ + TCGv_i32 tcg_el = tcg_const_i32(s->current_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_helper_rebuild_hflags_m32(cpu_env, tcg_el); + } else { + gen_helper_rebuild_hflags_a32(cpu_env, tcg_el); + } + tcg_temp_free_i32(tcg_el); + /* + * We default to ending the TB on a coprocessor register write, * but allow this to be suppressed by the register definition * (usually only necessary to work around guest bugs). */ + need_exit_tb = true; + } + if (need_exit_tb) { gen_lookup_tb(s); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/op_helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(usat16)(CPUARMState *env, uint32_t x, uint32_t shift) void HELPER(setend)(CPUARMState *env) { env->uncached_cpsr ^= CPSR_E; + arm_rebuild_hflags(env); } /* Function checks whether WFx (WFI/WFE) instructions are set up to be trapped. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(cpsr_read)(CPUARMState *env) void HELPER(cpsr_write)(CPUARMState *env, uint32_t val, uint32_t mask) { cpsr_write(env, val, mask, CPSRWriteByInstr); + /* TODO: Not all cpsr bits are relevant to hflags. */ + arm_rebuild_hflags(env); } /* Write the CPSR for a 32-bit exception return */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-20-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* ??? Lots of these bits are not implemented. */ /* This may enable/disable the MMU, so do a TLB flush. */ tlb_flush(CPU(cpu)); + + if (ri->type & ARM_CP_SUPPRESS_TB_END) { + /* + * Normally we would always end the TB on an SCTLR write; see the + * comment in ARMCPRegInfo sctlr initialization below for why Xscale + * is special. Setting ARM_CP_SUPPRESS_TB_END also stops the rebuild + * of hflags from the translator, so do it here. + */ + arm_rebuild_hflags(env); + } } static CPAccessResult fpexc32_access(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 6 ++++++ target/arm/translate.c | 5 ++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; + arm_rebuild_hflags(env); } void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; + arm_rebuild_hflags(env); } static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode, @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->regs[14] = lr; env->regs[15] = addr & 0xfffffffe; env->thumb = addr & 1; + arm_rebuild_hflags(env); } static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* Otherwise, we have a successful exception exit. */ arm_clear_exclusive(env); + arm_rebuild_hflags(env); qemu_log_mask(CPU_LOG_INT, "...successful exception return\n"); } @@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu) xpsr_write(env, 0, XPSR_IT); env->thumb = newpc & 1; env->regs[15] = newpc & ~1; + arm_rebuild_hflags(env); qemu_log_mask(CPU_LOG_INT, "...function return successful\n"); return true; @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; + arm_rebuild_hflags(env); return true; gen_invep: diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_MRS_v7m(DisasContext *s, arg_MRS_v7m *a) static bool trans_MSR_v7m(DisasContext *s, arg_MSR_v7m *a) { - TCGv_i32 addr, reg; + TCGv_i32 addr, reg, el; if (!arm_dc_feature(s, ARM_FEATURE_M)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_MSR_v7m(DisasContext *s, arg_MSR_v7m *a) gen_helper_v7m_msr(cpu_env, addr, reg); tcg_temp_free_i32(addr); tcg_temp_free_i32(reg); + el = tcg_const_i32(s->current_el); + gen_helper_rebuild_hflags_m32(cpu_env, el); + tcg_temp_free_i32(el); gen_lookup_tb(s); return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-22-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/armv7m_nvic.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, } } nvic_irq_update(s); - return MEMTX_OK; + goto exit_ok; case 0x200 ... 0x23f: /* NVIC Set pend */ /* the special logic in armv7m_nvic_set_pending() * is not needed since IRQs are never escalated @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, } } nvic_irq_update(s); - return MEMTX_OK; + goto exit_ok; case 0x300 ... 0x33f: /* NVIC Active */ - return MEMTX_OK; /* R/O */ + goto exit_ok; /* R/O */ case 0x400 ... 0x5ef: /* NVIC Priority */ startvec = (offset - 0x400) + NVIC_FIRST_IRQ; /* vector # */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, } } nvic_irq_update(s); - return MEMTX_OK; + goto exit_ok; case 0xd18 ... 0xd1b: /* System Handler Priority (SHPR1) */ if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) { - return MEMTX_OK; + goto exit_ok; } /* fall through */ case 0xd1c ... 0xd23: /* System Handler Priority (SHPR2, SHPR3) */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, set_prio(s, hdlidx, sbank, newprio); } nvic_irq_update(s); - return MEMTX_OK; + goto exit_ok; case 0xd28 ... 0xd2b: /* Configurable Fault Status (CFSR) */ if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) { - return MEMTX_OK; + goto exit_ok; } /* All bits are W1C, so construct 32 bit value with 0s in * the parts not written by the access size @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, */ s->cpu->env.v7m.cfsr[M_REG_NS] &= ~(value & R_V7M_CFSR_BFSR_MASK); } - return MEMTX_OK; + goto exit_ok; } if (size == 4) { nvic_writel(s, offset, value, attrs); - return MEMTX_OK; + goto exit_ok; } qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad write of size %d at offset 0x%x\n", size, offset); /* This is UNPREDICTABLE; treat as RAZ/WI */ + + exit_ok: + /* Ensure any changes made are reflected in the cached hflags. */ + arm_rebuild_hflags(&s->cpu->env); return MEMTX_OK; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the payoff. From perf record -g data of ubuntu 18 boot and shutdown: BEFORE: - 23.02% 2.82% qemu-system-aar [.] helper_lookup_tb_ptr - 20.22% helper_lookup_tb_ptr + 10.05% tb_htable_lookup - 9.13% cpu_get_tb_cpu_state 3.20% aa64_va_parameters_both 0.55% fp_exception_el - 11.66% 4.74% qemu-system-aar [.] cpu_get_tb_cpu_state - 6.96% cpu_get_tb_cpu_state 3.63% aa64_va_parameters_both 0.60% fp_exception_el 0.53% sve_exception_el AFTER: - 16.40% 3.40% qemu-system-aar [.] helper_lookup_tb_ptr - 13.03% helper_lookup_tb_ptr + 11.19% tb_htable_lookup 0.55% cpu_get_tb_cpu_state 0.98% 0.71% qemu-system-aar [.] cpu_get_tb_cpu_state 0.87% 0.24% qemu-system-aar [.] rebuild_hflags_a64 Before, helper_lookup_tb_ptr is the second hottest function in the application, consuming almost a quarter of the runtime. Within the entire execution, cpu_get_tb_cpu_state consumes about 12%. After, helper_lookup_tb_ptr has dropped to the fourth hottest function, with consumption dropping to a sixth of the runtime. Within the entire execution, cpu_get_tb_cpu_state has dropped below 1%, and the supporting function to rebuild hflags also consumes about 1%. Assertions are retained for --enable-debug-tcg. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(rebuild_hflags_a64)(CPUARMState *env, int el) void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { - uint32_t flags, pstate_for_ss; + uint32_t flags = env->hflags; + uint32_t pstate_for_ss; *cs_base = 0; - flags = rebuild_hflags_internal(env); +#ifdef CONFIG_DEBUG_TCG + assert(flags == rebuild_hflags_internal(env)); +#endif - if (is_a64(env)) { + if (FIELD_EX32(flags, TBFLAG_ANY, AARCH64_STATE)) { *pc = env->pc; if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This file keeps the various QDev blocks separated by comments. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20191005154748.21718-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sdhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo sdhci_bus_info = { .class_init = sdhci_bus_class_init, }; +/* --- qdev i.MX eSDHC --- */ + static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size) { SDHCIState *s = SYSBUS_SDHCI(opaque); @@ -XXX,XX +XXX,XX @@ usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) } } - static const MemoryRegionOps usdhc_mmio_ops = { .read = usdhc_read, .write = usdhc_write, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Linux kernel access few S3C-specific registers [1] to set some clock. We don't care about this part for device emulation [2]. Add a dummy device to properly ignore these accesses, so we can focus on the important registers missing. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/mmc/host/sdhci-s3c-regs.h?h=cc014f3 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/mmc/host/sdhci-s3c.c?h=v5.3#n263 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20191005154748.21718-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sdhci.h | 2 ++ hw/sd/sdhci.c | 65 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+) diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sdhci.h +++ b/include/hw/sd/sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct SDHCIState { #define TYPE_IMX_USDHC "imx-usdhc" +#define TYPE_S3C_SDHCI "s3c-sdhci" + #endif /* SDHCI_H */ diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx_usdhc_info = { .instance_init = imx_usdhc_init, }; +/* --- qdev Samsung s3c --- */ + +#define S3C_SDHCI_CONTROL2 0x80 +#define S3C_SDHCI_CONTROL3 0x84 +#define S3C_SDHCI_CONTROL4 0x8c + +static uint64_t sdhci_s3c_read(void *opaque, hwaddr offset, unsigned size) +{ + uint64_t ret; + + switch (offset) { + case S3C_SDHCI_CONTROL2: + case S3C_SDHCI_CONTROL3: + case S3C_SDHCI_CONTROL4: + /* ignore */ + ret = 0; + break; + default: + ret = sdhci_read(opaque, offset, size); + break; + } + + return ret; +} + +static void sdhci_s3c_write(void *opaque, hwaddr offset, uint64_t val, + unsigned size) +{ + switch (offset) { + case S3C_SDHCI_CONTROL2: + case S3C_SDHCI_CONTROL3: + case S3C_SDHCI_CONTROL4: + /* ignore */ + break; + default: + sdhci_write(opaque, offset, val, size); + break; + } +} + +static const MemoryRegionOps sdhci_s3c_mmio_ops = { + .read = sdhci_s3c_read, + .write = sdhci_s3c_write, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + .unaligned = false + }, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void sdhci_s3c_init(Object *obj) +{ + SDHCIState *s = SYSBUS_SDHCI(obj); + + s->io_ops = &sdhci_s3c_mmio_ops; +} + +static const TypeInfo sdhci_s3c_info = { + .name = TYPE_S3C_SDHCI , + .parent = TYPE_SYSBUS_SDHCI, + .instance_init = sdhci_s3c_init, +}; + static void sdhci_register_types(void) { type_register_static(&sdhci_sysbus_info); type_register_static(&sdhci_bus_info); type_register_static(&imx_usdhc_info); + type_register_static(&sdhci_s3c_info); } type_init(sdhci_register_types) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Exynos SoC has specific SDHCI registers. Use the s3c SDHCI model which handle these specific registers. This silents the following "SDHC ... not implemented" warnings so we can focus on the important registers missing: $ qemu-system-arm ... -d unimp \ -append "... root=/dev/mmcblk0 rootfstype=ext4 rw rootwait" \ -drive file=linux-build-test/rootfs/arm/rootfs-armv5.ext2,if=sd,format=raw [...] [ 25.744858] sdhci: Secure Digital Host Controller Interface driver [ 25.745862] sdhci: Copyright(c) Pierre Ossman [ 25.783188] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (12000000 Hz) SDHC rd_4b @0x80 not implemented SDHC wr_4b @0x80 <- 0x00000020 not implemented SDHC wr_4b @0x8c <- 0x00030000 not implemented SDHC rd_4b @0x80 not implemented SDHC wr_4b @0x80 <- 0xc0004100 not implemented SDHC wr_4b @0x84 <- 0x80808080 not implemented [ 26.013318] mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA [ 26.032318] Synopsys Designware Multimedia Card Interface Driver [ 42.024885] Waiting for root device /dev/mmcblk0... Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20191005154748.21718-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/exynos4210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) * public datasheet which is very similar (implementing * MMC Specification Version 4.0 being the only difference noted) */ - dev = qdev_create(NULL, TYPE_SYSBUS_SDHCI); + dev = qdev_create(NULL, TYPE_S3C_SDHCI); qdev_prop_set_uint64(dev, "capareg", EXYNOS4210_SDHCI_CAPABILITIES); qdev_init_nofail(dev); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> IEC binary prefixes ease code review: the unit is explicit. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "cpu.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) memory_region_add_subregion(address_space_mem, 0, ext_ram); /* 256K of on-chip memory */ - memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 << 10, + memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 * KiB, &error_fatal); memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> IEC binary prefixes ease code review: the unit is explicit. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2-tz.c | 3 ++- hw/arm/mps2.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "qemu/error-report.h" #include "hw/arm/boot.h" @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) * call the 16MB our "system memory", as it's the largest lump. */ memory_region_allocate_system_memory(&mms->psram, - NULL, "mps.ram", 0x01000000); + NULL, "mps.ram", 16 * MiB); memory_region_add_subregion(system_memory, 0x80000000, &mms->psram); /* The overflow IRQs for all UARTs are ORed together. diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "qemu/error-report.h" #include "hw/arm/boot.h" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) * zbt_boot_ctrl is always zero). */ memory_region_allocate_system_memory(&mms->psram, - NULL, "mps.ram", 0x1000000); + NULL, "mps.ram", 16 * MiB); memory_region_add_subregion(system_memory, 0x21000000, &mms->psram); switch (mmc->fpga_type) { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The SDRAM is incorrectly created in the SA1110 SoC. Move its creation in the board code, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/strongarm.h | 4 +--- hw/arm/collie.c | 8 ++++++-- hw/arm/strongarm.c | 7 +------ 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/hw/arm/strongarm.h b/hw/arm/strongarm.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.h +++ b/hw/arm/strongarm.h @@ -XXX,XX +XXX,XX @@ enum { typedef struct { ARMCPU *cpu; - MemoryRegion sdram; DeviceState *pic; DeviceState *gpio; DeviceState *ppc; @@ -XXX,XX +XXX,XX @@ typedef struct { SSIBus *ssp_bus; } StrongARMState; -StrongARMState *sa1110_init(MemoryRegion *sysmem, - unsigned int sdram_size, const char *rev); +StrongARMState *sa1110_init(const char *cpu_type); #endif diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) { StrongARMState *s; DriveInfo *dinfo; - MemoryRegion *sysmem = get_system_memory(); + MemoryRegion *sdram = g_new(MemoryRegion, 1); - s = sa1110_init(sysmem, collie_binfo.ram_size, machine->cpu_type); + s = sa1110_init(machine->cpu_type); + + memory_region_allocate_system_memory(sdram, NULL, "strongarm.sdram", + collie_binfo.ram_size); + memory_region_add_subregion(get_system_memory(), SA_SDCS0, sdram); dinfo = drive_get(IF_PFLASH, 0, 0); pflash_cfi01_register(SA_CS0, "collie.fl1", 0x02000000, diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo strongarm_ssp_info = { }; /* Main CPU functions */ -StrongARMState *sa1110_init(MemoryRegion *sysmem, - unsigned int sdram_size, const char *cpu_type) +StrongARMState *sa1110_init(const char *cpu_type) { StrongARMState *s; int i; @@ -XXX,XX +XXX,XX @@ StrongARMState *sa1110_init(MemoryRegion *sysmem, s->cpu = ARM_CPU(cpu_create(cpu_type)); - memory_region_allocate_system_memory(&s->sdram, NULL, "strongarm.sdram", - sdram_size); - memory_region_add_subregion(sysmem, SA_SDCS0, &s->sdram); - s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000, qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ), qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ), -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The SDRAM is incorrectly created in the OMAP2420 SoC. Move its creation in the board code, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 4 +--- hw/arm/nseries.c | 10 +++++++--- hw/arm/omap2.c | 13 +++++-------- 3 files changed, 13 insertions(+), 14 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s { MemoryRegion tap_iomem; MemoryRegion imif_ram; MemoryRegion emiff_ram; - MemoryRegion sdram; MemoryRegion sram; struct omap_dma_port_if_s { @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, const char *core); /* omap2.c */ -struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, - unsigned long sdram_size, +struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sdram, const char *core); uint32_t omap_badwidth_read8(void *opaque, hwaddr addr); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ /* Nokia N8x0 support */ struct n800_s { + MemoryRegion sdram; struct omap_mpu_state_s *mpu; struct rfbi_chip_s blizzard; @@ -XXX,XX +XXX,XX @@ static int n810_atag_setup(const struct arm_boot_info *info, void *p) static void n8x0_init(MachineState *machine, struct arm_boot_info *binfo, int model) { - MemoryRegion *sysmem = get_system_memory(); struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s)); - int sdram_size = binfo->ram_size; + uint64_t sdram_size = binfo->ram_size; - s->mpu = omap2420_mpu_init(sysmem, sdram_size, machine->cpu_type); + memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram", + sdram_size); + memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE, &s->sdram); + + s->mpu = omap2420_mpu_init(&s->sdram, machine->cpu_type); /* Setup peripherals * diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qapi/error.h" #include "cpu.h" +#include "exec/address-spaces.h" #include "sysemu/blockdev.h" #include "sysemu/qtest.h" #include "sysemu/reset.h" @@ -XXX,XX +XXX,XX @@ static const struct dma_irq_map omap2_dma_irq_map[] = { { 0, OMAP_INT_24XX_SDMA_IRQ3 }, }; -struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, - unsigned long sdram_size, +struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sdram, const char *cpu_type) { struct omap_mpu_state_s *s = g_new0(struct omap_mpu_state_s, 1); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, int i; SysBusDevice *busdev; struct omap_target_agent_s *ta; + MemoryRegion *sysmem = get_system_memory(); /* Core */ s->mpu_model = omap2420; s->cpu = ARM_CPU(cpu_create(cpu_type)); - s->sdram_size = sdram_size; s->sram_size = OMAP242X_SRAM_SIZE; s->wakeup = qemu_allocate_irq(omap_mpu_wakeup, s, 0); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, omap_clk_init(s); /* Memory-mapped stuff */ - memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram", - s->sdram_size); - memory_region_add_subregion(sysmem, OMAP2_Q2_BASE, &s->sdram); memory_region_init_ram(&s->sram, NULL, "omap2.sram", s->sram_size, &error_fatal); memory_region_add_subregion(sysmem, OMAP2_SRAM_BASE, &s->sram); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, s->port->addr_valid = omap2_validate_addr; /* Register SDRAM and SRAM ports for fast DMA transfers. */ - soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->sdram), - OMAP2_Q2_BASE, s->sdram_size); + soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(sdram), + OMAP2_Q2_BASE, memory_region_size(sdram)); soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->sram), OMAP2_SRAM_BASE, s->sram_size); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The SDRAM is incorrectly created in the OMAP310 SoC. Move its creation in the board code, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 ++---- hw/arm/omap1.c | 12 +++++------- hw/arm/omap_sx1.c | 8 ++++++-- hw/arm/palm.c | 8 ++++++-- 4 files changed, 19 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s { MemoryRegion mpui_io_iomem; MemoryRegion tap_iomem; MemoryRegion imif_ram; - MemoryRegion emiff_ram; MemoryRegion sram; struct omap_dma_port_if_s { @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s { hwaddr addr); } port[__omap_dma_port_last]; - unsigned long sdram_size; + uint64_t sdram_size; unsigned long sram_size; /* MPUI-TIPB peripherals */ @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s { }; /* omap1.c */ -struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, - unsigned long sdram_size, +struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *sdram, const char *core); /* omap2.c */ diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" +#include "exec/address-spaces.h" #include "hw/boards.h" #include "hw/hw.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ static int omap_validate_tipb_mpui_addr(struct omap_mpu_state_s *s, return range_covers_byte(0xe1010000, 0xe1020004 - 0xe1010000, addr); } -struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, - unsigned long sdram_size, +struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *dram, const char *cpu_type) { int i; @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, qemu_irq dma_irqs[6]; DriveInfo *dinfo; SysBusDevice *busdev; + MemoryRegion *system_memory = get_system_memory(); /* Core */ s->mpu_model = omap310; s->cpu = ARM_CPU(cpu_create(cpu_type)); - s->sdram_size = sdram_size; + s->sdram_size = memory_region_size(dram); s->sram_size = OMAP15XX_SRAM_SIZE; s->wakeup = qemu_allocate_irq(omap_mpu_wakeup, s, 0); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, omap_clk_init(s); /* Memory-mapped stuff */ - memory_region_allocate_system_memory(&s->emiff_ram, NULL, "omap1.dram", - s->sdram_size); - memory_region_add_subregion(system_memory, OMAP_EMIFF_BASE, &s->emiff_ram); memory_region_init_ram(&s->imif_ram, NULL, "omap1.sram", s->sram_size, &error_fatal); memory_region_add_subregion(system_memory, OMAP_IMIF_BASE, &s->imif_ram); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, s->port[tipb_mpui].addr_valid = omap_validate_tipb_mpui_addr; /* Register SDRAM and SRAM DMA ports for fast transfers. */ - soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->emiff_ram), + soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(dram), OMAP_EMIFF_BASE, s->sdram_size); soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->imif_ram), OMAP_IMIF_BASE, s->sram_size); diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) { struct omap_mpu_state_s *mpu; MemoryRegion *address_space = get_system_memory(); + MemoryRegion *dram = g_new(MemoryRegion, 1); MemoryRegion *flash = g_new(MemoryRegion, 1); MemoryRegion *cs = g_new(MemoryRegion, 4); static uint32_t cs0val = 0x00213090; @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) flash_size = flash2_size; } - mpu = omap310_mpu_init(address_space, sx1_binfo.ram_size, - machine->cpu_type); + memory_region_allocate_system_memory(dram, NULL, "omap1.dram", + sx1_binfo.ram_size); + memory_region_add_subregion(address_space, OMAP_EMIFF_BASE, dram); + + mpu = omap310_mpu_init(dram, machine->cpu_type); /* External Flash (EMIFS) */ memory_region_init_ram(flash, NULL, "omap_sx1.flash0-0", flash_size, diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static void palmte_init(MachineState *machine) MemoryRegion *address_space_mem = get_system_memory(); struct omap_mpu_state_s *mpu; int flash_size = 0x00800000; - int sdram_size = palmte_binfo.ram_size; static uint32_t cs0val = 0xffffffff; static uint32_t cs1val = 0x0000e1a0; static uint32_t cs2val = 0x0000e1a0; static uint32_t cs3val = 0xe1a0e1a0; int rom_size, rom_loaded = 0; + MemoryRegion *dram = g_new(MemoryRegion, 1); MemoryRegion *flash = g_new(MemoryRegion, 1); MemoryRegion *cs = g_new(MemoryRegion, 4); - mpu = omap310_mpu_init(address_space_mem, sdram_size, machine->cpu_type); + memory_region_allocate_system_memory(dram, NULL, "omap1.dram", + palmte_binfo.ram_size); + memory_region_add_subregion(address_space_mem, OMAP_EMIFF_BASE, dram); + + mpu = omap310_mpu_init(dram, machine->cpu_type); /* External Flash (EMIFS) */ memory_region_init_ram(flash, NULL, "palmte.flash", flash_size, -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Having the RAM creation code in a separate function is not very helpful. Move this code directly inside the board_init() function, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/digic_boards.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/hw/arm/digic_boards.c b/hw/arm/digic_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/digic_boards.c +++ b/hw/arm/digic_boards.c @@ -XXX,XX +XXX,XX @@ typedef struct DigicBoard { const char *rom1_def_filename; } DigicBoard; -static void digic4_board_setup_ram(DigicBoardState *s, hwaddr ram_size) -{ - memory_region_allocate_system_memory(&s->ram, NULL, "ram", ram_size); - memory_region_add_subregion(get_system_memory(), 0, &s->ram); -} - static void digic4_board_init(DigicBoard *board) { Error *err = NULL; @@ -XXX,XX +XXX,XX @@ static void digic4_board_init(DigicBoard *board) exit(1); } - digic4_board_setup_ram(s, board->ram_size); + memory_region_allocate_system_memory(&s->ram, NULL, "ram", board->ram_size); + memory_region_add_subregion(get_system_memory(), 0, &s->ram); if (board->add_rom0) { board->add_rom0(s, DIGIC4_ROM0_BASE, board->rom0_def_filename); -- 2.20.1 The following changes since commit 8f6330a807f2642dc2a3cdf33347aa28a4c00a87: Merge tag 'pull-maintainer-updates-060324-1' of https://gitlab.com/stsquad/qemu into staging (2024-03-06 16:56:20 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240308 for you to fetch changes up to bbf6c6dbead82292a20951eb1204442a6b838de9: target/arm: Move v7m-related code from cpu32.c into a separate file (2024-03-08 14:45:03 +0000) ---------------------------------------------------------------- target-arm queue: * Implement FEAT_ECV * STM32L4x5: Implement GPIO device * Fix 32-bit SMOPA * Refactor v7m related code from cpu32.c into its own file * hw/rtc/sun4v-rtc: Relicense to GPLv2-or-later ---------------------------------------------------------------- Inès Varhol (3): hw/gpio: Implement STM32L4x5 GPIO hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoC tests/qtest: Add STM32L4x5 GPIO QTest testcase Peter Maydell (9): target/arm: Move some register related defines to internals.h target/arm: Timer _EL02 registers UNDEF for E2H == 0 target/arm: use FIELD macro for CNTHCTL bit definitions target/arm: Don't allow RES0 CNTHCTL_EL2 bits to be written target/arm: Implement new FEAT_ECV trap bits target/arm: Define CNTPCTSS_EL0 and CNTVCTSS_EL0 target/arm: Implement FEAT_ECV CNTPOFF_EL2 handling target/arm: Enable FEAT_ECV for 'max' CPU hw/rtc/sun4v-rtc: Relicense to GPLv2-or-later Richard Henderson (1): target/arm: Fix 32-bit SMOPA Thomas Huth (1): target/arm: Move v7m-related code from cpu32.c into a separate file MAINTAINERS | 1 + docs/system/arm/b-l475e-iot01a.rst | 2 +- docs/system/arm/emulation.rst | 1 + include/hw/arm/stm32l4x5_soc.h | 2 + include/hw/gpio/stm32l4x5_gpio.h | 71 +++++ include/hw/misc/stm32l4x5_syscfg.h | 3 +- include/hw/rtc/sun4v-rtc.h | 2 +- target/arm/cpu-features.h | 10 + target/arm/cpu.h | 129 +-------- target/arm/internals.h | 151 ++++++++++ hw/arm/stm32l4x5_soc.c | 71 ++++- hw/gpio/stm32l4x5_gpio.c | 477 ++++++++++++++++++++++++++++++++ hw/misc/stm32l4x5_syscfg.c | 1 + hw/rtc/sun4v-rtc.c | 2 +- target/arm/helper.c | 189 ++++++++++++- target/arm/tcg/cpu-v7m.c | 290 +++++++++++++++++++ target/arm/tcg/cpu32.c | 261 ------------------ target/arm/tcg/cpu64.c | 1 + target/arm/tcg/sme_helper.c | 77 +++--- tests/qtest/stm32l4x5_gpio-test.c | 551 +++++++++++++++++++++++++++++++++++++ tests/tcg/aarch64/sme-smopa-1.c | 47 ++++ tests/tcg/aarch64/sme-smopa-2.c | 54 ++++ hw/arm/Kconfig | 3 +- hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/gpio/trace-events | 6 + target/arm/meson.build | 3 + target/arm/tcg/meson.build | 3 + target/arm/trace-events | 1 + tests/qtest/meson.build | 3 +- tests/tcg/aarch64/Makefile.target | 2 +- 31 files changed, 1962 insertions(+), 456 deletions(-) create mode 100644 include/hw/gpio/stm32l4x5_gpio.h create mode 100644 hw/gpio/stm32l4x5_gpio.c create mode 100644 target/arm/tcg/cpu-v7m.c create mode 100644 tests/qtest/stm32l4x5_gpio-test.c create mode 100644 tests/tcg/aarch64/sme-smopa-1.c create mode 100644 tests/tcg/aarch64/sme-smopa-2.c cpu.h has a lot of #defines relating to CPU register fields. Most of these aren't actually used outside target/arm code, so there's no point in cluttering up the cpu.h file with them. Move some easy ones to internals.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301183219.2424889-2-peter.maydell@linaro.org --- target/arm/cpu.h | 128 ----------------------------------------- target/arm/internals.h | 128 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 128 insertions(+), 128 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMGenericTimer { uint64_t ctl; /* Timer Control register */ } ARMGenericTimer; -#define VTCR_NSW (1u << 29) -#define VTCR_NSA (1u << 30) -#define VSTCR_SW VTCR_NSW -#define VSTCR_SA VTCR_NSA - /* Define a maximum sized vector register. * For 32-bit, this is a 128-bit NEON/AdvSIMD register. * For 64-bit, this is a 2048-bit SVE register. @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define SCTLR_SPINTMASK (1ULL << 62) /* FEAT_NMI */ #define SCTLR_TIDCP (1ULL << 63) /* FEAT_TIDCP1 */ -/* Bit definitions for CPACR (AArch32 only) */ -FIELD(CPACR, CP10, 20, 2) -FIELD(CPACR, CP11, 22, 2) -FIELD(CPACR, TRCDIS, 28, 1) /* matches CPACR_EL1.TTA */ -FIELD(CPACR, D32DIS, 30, 1) /* up to v7; RAZ in v8 */ -FIELD(CPACR, ASEDIS, 31, 1) - -/* Bit definitions for CPACR_EL1 (AArch64 only) */ -FIELD(CPACR_EL1, ZEN, 16, 2) -FIELD(CPACR_EL1, FPEN, 20, 2) -FIELD(CPACR_EL1, SMEN, 24, 2) -FIELD(CPACR_EL1, TTA, 28, 1) /* matches CPACR.TRCDIS */ - -/* Bit definitions for HCPTR (AArch32 only) */ -FIELD(HCPTR, TCP10, 10, 1) -FIELD(HCPTR, TCP11, 11, 1) -FIELD(HCPTR, TASE, 15, 1) -FIELD(HCPTR, TTA, 20, 1) -FIELD(HCPTR, TAM, 30, 1) /* matches CPTR_EL2.TAM */ -FIELD(HCPTR, TCPAC, 31, 1) /* matches CPTR_EL2.TCPAC */ - -/* Bit definitions for CPTR_EL2 (AArch64 only) */ -FIELD(CPTR_EL2, TZ, 8, 1) /* !E2H */ -FIELD(CPTR_EL2, TFP, 10, 1) /* !E2H, matches HCPTR.TCP10 */ -FIELD(CPTR_EL2, TSM, 12, 1) /* !E2H */ -FIELD(CPTR_EL2, ZEN, 16, 2) /* E2H */ -FIELD(CPTR_EL2, FPEN, 20, 2) /* E2H */ -FIELD(CPTR_EL2, SMEN, 24, 2) /* E2H */ -FIELD(CPTR_EL2, TTA, 28, 1) -FIELD(CPTR_EL2, TAM, 30, 1) /* matches HCPTR.TAM */ -FIELD(CPTR_EL2, TCPAC, 31, 1) /* matches HCPTR.TCPAC */ - -/* Bit definitions for CPTR_EL3 (AArch64 only) */ -FIELD(CPTR_EL3, EZ, 8, 1) -FIELD(CPTR_EL3, TFP, 10, 1) -FIELD(CPTR_EL3, ESM, 12, 1) -FIELD(CPTR_EL3, TTA, 20, 1) -FIELD(CPTR_EL3, TAM, 30, 1) -FIELD(CPTR_EL3, TCPAC, 31, 1) - -#define MDCR_MTPME (1U << 28) -#define MDCR_TDCC (1U << 27) -#define MDCR_HLP (1U << 26) /* MDCR_EL2 */ -#define MDCR_SCCD (1U << 23) /* MDCR_EL3 */ -#define MDCR_HCCD (1U << 23) /* MDCR_EL2 */ -#define MDCR_EPMAD (1U << 21) -#define MDCR_EDAD (1U << 20) -#define MDCR_TTRF (1U << 19) -#define MDCR_STE (1U << 18) /* MDCR_EL3 */ -#define MDCR_SPME (1U << 17) /* MDCR_EL3 */ -#define MDCR_HPMD (1U << 17) /* MDCR_EL2 */ -#define MDCR_SDD (1U << 16) -#define MDCR_SPD (3U << 14) -#define MDCR_TDRA (1U << 11) -#define MDCR_TDOSA (1U << 10) -#define MDCR_TDA (1U << 9) -#define MDCR_TDE (1U << 8) -#define MDCR_HPME (1U << 7) -#define MDCR_TPM (1U << 6) -#define MDCR_TPMCR (1U << 5) -#define MDCR_HPMN (0x1fU) - -/* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */ -#define SDCR_VALID_MASK (MDCR_MTPME | MDCR_TDCC | MDCR_SCCD | \ - MDCR_EPMAD | MDCR_EDAD | MDCR_TTRF | \ - MDCR_STE | MDCR_SPME | MDCR_SPD) - #define CPSR_M (0x1fU) #define CPSR_T (1U << 5) #define CPSR_F (1U << 6) @@ -XXX,XX +XXX,XX @@ FIELD(CPTR_EL3, TCPAC, 31, 1) #define XPSR_NZCV CPSR_NZCV #define XPSR_IT CPSR_IT -#define TTBCR_N (7U << 0) /* TTBCR.EAE==0 */ -#define TTBCR_T0SZ (7U << 0) /* TTBCR.EAE==1 */ -#define TTBCR_PD0 (1U << 4) -#define TTBCR_PD1 (1U << 5) -#define TTBCR_EPD0 (1U << 7) -#define TTBCR_IRGN0 (3U << 8) -#define TTBCR_ORGN0 (3U << 10) -#define TTBCR_SH0 (3U << 12) -#define TTBCR_T1SZ (3U << 16) -#define TTBCR_A1 (1U << 22) -#define TTBCR_EPD1 (1U << 23) -#define TTBCR_IRGN1 (3U << 24) -#define TTBCR_ORGN1 (3U << 26) -#define TTBCR_SH1 (1U << 28) -#define TTBCR_EAE (1U << 31) - -FIELD(VTCR, T0SZ, 0, 6) -FIELD(VTCR, SL0, 6, 2) -FIELD(VTCR, IRGN0, 8, 2) -FIELD(VTCR, ORGN0, 10, 2) -FIELD(VTCR, SH0, 12, 2) -FIELD(VTCR, TG0, 14, 2) -FIELD(VTCR, PS, 16, 3) -FIELD(VTCR, VS, 19, 1) -FIELD(VTCR, HA, 21, 1) -FIELD(VTCR, HD, 22, 1) -FIELD(VTCR, HWU59, 25, 1) -FIELD(VTCR, HWU60, 26, 1) -FIELD(VTCR, HWU61, 27, 1) -FIELD(VTCR, HWU62, 28, 1) -FIELD(VTCR, NSW, 29, 1) -FIELD(VTCR, NSA, 30, 1) -FIELD(VTCR, DS, 32, 1) -FIELD(VTCR, SL2, 33, 1) - /* Bit definitions for ARMv8 SPSR (PSTATE) format. * Only these are valid when in AArch64 mode; in * AArch32 mode SPSRs are basically CPSR-format. @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_TWEDEN (1ULL << 59) #define HCR_TWEDEL MAKE_64BIT_MASK(60, 4) -#define HCRX_ENAS0 (1ULL << 0) -#define HCRX_ENALS (1ULL << 1) -#define HCRX_ENASR (1ULL << 2) -#define HCRX_FNXS (1ULL << 3) -#define HCRX_FGTNXS (1ULL << 4) -#define HCRX_SMPME (1ULL << 5) -#define HCRX_TALLINT (1ULL << 6) -#define HCRX_VINMI (1ULL << 7) -#define HCRX_VFNMI (1ULL << 8) -#define HCRX_CMOW (1ULL << 9) -#define HCRX_MCE2 (1ULL << 10) -#define HCRX_MSCEN (1ULL << 11) - -#define HPFAR_NS (1ULL << 63) - #define SCR_NS (1ULL << 0) #define SCR_IRQ (1ULL << 1) #define SCR_FIQ (1ULL << 2) @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define SCR_GPF (1ULL << 48) #define SCR_NSE (1ULL << 62) -#define HSTR_TTEE (1 << 16) -#define HSTR_TJDBX (1 << 17) - -#define CNTHCTL_CNTVMASK (1 << 18) -#define CNTHCTL_CNTPMASK (1 << 19) - /* Return the current FPSCR value. */ uint32_t vfp_get_fpscr(CPUARMState *env); void vfp_set_fpscr(CPUARMState *env, uint32_t val); diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(DBGWCR, WT, 20, 1) FIELD(DBGWCR, MASK, 24, 5) FIELD(DBGWCR, SSCE, 29, 1) +#define VTCR_NSW (1u << 29) +#define VTCR_NSA (1u << 30) +#define VSTCR_SW VTCR_NSW +#define VSTCR_SA VTCR_NSA + +/* Bit definitions for CPACR (AArch32 only) */ +FIELD(CPACR, CP10, 20, 2) +FIELD(CPACR, CP11, 22, 2) +FIELD(CPACR, TRCDIS, 28, 1) /* matches CPACR_EL1.TTA */ +FIELD(CPACR, D32DIS, 30, 1) /* up to v7; RAZ in v8 */ +FIELD(CPACR, ASEDIS, 31, 1) + +/* Bit definitions for CPACR_EL1 (AArch64 only) */ +FIELD(CPACR_EL1, ZEN, 16, 2) +FIELD(CPACR_EL1, FPEN, 20, 2) +FIELD(CPACR_EL1, SMEN, 24, 2) +FIELD(CPACR_EL1, TTA, 28, 1) /* matches CPACR.TRCDIS */ + +/* Bit definitions for HCPTR (AArch32 only) */ +FIELD(HCPTR, TCP10, 10, 1) +FIELD(HCPTR, TCP11, 11, 1) +FIELD(HCPTR, TASE, 15, 1) +FIELD(HCPTR, TTA, 20, 1) +FIELD(HCPTR, TAM, 30, 1) /* matches CPTR_EL2.TAM */ +FIELD(HCPTR, TCPAC, 31, 1) /* matches CPTR_EL2.TCPAC */ + +/* Bit definitions for CPTR_EL2 (AArch64 only) */ +FIELD(CPTR_EL2, TZ, 8, 1) /* !E2H */ +FIELD(CPTR_EL2, TFP, 10, 1) /* !E2H, matches HCPTR.TCP10 */ +FIELD(CPTR_EL2, TSM, 12, 1) /* !E2H */ +FIELD(CPTR_EL2, ZEN, 16, 2) /* E2H */ +FIELD(CPTR_EL2, FPEN, 20, 2) /* E2H */ +FIELD(CPTR_EL2, SMEN, 24, 2) /* E2H */ +FIELD(CPTR_EL2, TTA, 28, 1) +FIELD(CPTR_EL2, TAM, 30, 1) /* matches HCPTR.TAM */ +FIELD(CPTR_EL2, TCPAC, 31, 1) /* matches HCPTR.TCPAC */ + +/* Bit definitions for CPTR_EL3 (AArch64 only) */ +FIELD(CPTR_EL3, EZ, 8, 1) +FIELD(CPTR_EL3, TFP, 10, 1) +FIELD(CPTR_EL3, ESM, 12, 1) +FIELD(CPTR_EL3, TTA, 20, 1) +FIELD(CPTR_EL3, TAM, 30, 1) +FIELD(CPTR_EL3, TCPAC, 31, 1) + +#define MDCR_MTPME (1U << 28) +#define MDCR_TDCC (1U << 27) +#define MDCR_HLP (1U << 26) /* MDCR_EL2 */ +#define MDCR_SCCD (1U << 23) /* MDCR_EL3 */ +#define MDCR_HCCD (1U << 23) /* MDCR_EL2 */ +#define MDCR_EPMAD (1U << 21) +#define MDCR_EDAD (1U << 20) +#define MDCR_TTRF (1U << 19) +#define MDCR_STE (1U << 18) /* MDCR_EL3 */ +#define MDCR_SPME (1U << 17) /* MDCR_EL3 */ +#define MDCR_HPMD (1U << 17) /* MDCR_EL2 */ +#define MDCR_SDD (1U << 16) +#define MDCR_SPD (3U << 14) +#define MDCR_TDRA (1U << 11) +#define MDCR_TDOSA (1U << 10) +#define MDCR_TDA (1U << 9) +#define MDCR_TDE (1U << 8) +#define MDCR_HPME (1U << 7) +#define MDCR_TPM (1U << 6) +#define MDCR_TPMCR (1U << 5) +#define MDCR_HPMN (0x1fU) + +/* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */ +#define SDCR_VALID_MASK (MDCR_MTPME | MDCR_TDCC | MDCR_SCCD | \ + MDCR_EPMAD | MDCR_EDAD | MDCR_TTRF | \ + MDCR_STE | MDCR_SPME | MDCR_SPD) + +#define TTBCR_N (7U << 0) /* TTBCR.EAE==0 */ +#define TTBCR_T0SZ (7U << 0) /* TTBCR.EAE==1 */ +#define TTBCR_PD0 (1U << 4) +#define TTBCR_PD1 (1U << 5) +#define TTBCR_EPD0 (1U << 7) +#define TTBCR_IRGN0 (3U << 8) +#define TTBCR_ORGN0 (3U << 10) +#define TTBCR_SH0 (3U << 12) +#define TTBCR_T1SZ (3U << 16) +#define TTBCR_A1 (1U << 22) +#define TTBCR_EPD1 (1U << 23) +#define TTBCR_IRGN1 (3U << 24) +#define TTBCR_ORGN1 (3U << 26) +#define TTBCR_SH1 (1U << 28) +#define TTBCR_EAE (1U << 31) + +FIELD(VTCR, T0SZ, 0, 6) +FIELD(VTCR, SL0, 6, 2) +FIELD(VTCR, IRGN0, 8, 2) +FIELD(VTCR, ORGN0, 10, 2) +FIELD(VTCR, SH0, 12, 2) +FIELD(VTCR, TG0, 14, 2) +FIELD(VTCR, PS, 16, 3) +FIELD(VTCR, VS, 19, 1) +FIELD(VTCR, HA, 21, 1) +FIELD(VTCR, HD, 22, 1) +FIELD(VTCR, HWU59, 25, 1) +FIELD(VTCR, HWU60, 26, 1) +FIELD(VTCR, HWU61, 27, 1) +FIELD(VTCR, HWU62, 28, 1) +FIELD(VTCR, NSW, 29, 1) +FIELD(VTCR, NSA, 30, 1) +FIELD(VTCR, DS, 32, 1) +FIELD(VTCR, SL2, 33, 1) + +#define HCRX_ENAS0 (1ULL << 0) +#define HCRX_ENALS (1ULL << 1) +#define HCRX_ENASR (1ULL << 2) +#define HCRX_FNXS (1ULL << 3) +#define HCRX_FGTNXS (1ULL << 4) +#define HCRX_SMPME (1ULL << 5) +#define HCRX_TALLINT (1ULL << 6) +#define HCRX_VINMI (1ULL << 7) +#define HCRX_VFNMI (1ULL << 8) +#define HCRX_CMOW (1ULL << 9) +#define HCRX_MCE2 (1ULL << 10) +#define HCRX_MSCEN (1ULL << 11) + +#define HPFAR_NS (1ULL << 63) + +#define HSTR_TTEE (1 << 16) +#define HSTR_TJDBX (1 << 17) + +#define CNTHCTL_CNTVMASK (1 << 18) +#define CNTHCTL_CNTPMASK (1 << 19) + /* We use a few fake FSR values for internal purposes in M profile. * M profile cores don't have A/R format FSRs, but currently our * get_phys_addr() code assumes A/R profile and reports failures via -- 2.34.1 The timer _EL02 registers should UNDEF for invalid accesses from EL2 or EL3 when HCR_EL2.E2H == 0, not take a cp access trap. We were delivering the exception to EL2 with the wrong syndrome. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301183219.2424889-3-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } if (!(arm_hcr_el2_eff(env) & HCR_E2H)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_UNCATEGORIZED; } return CP_ACCESS_OK; } -- 2.34.1 We prefer the FIELD macro over ad-hoc #defines for register bits; switch CNTHCTL to that style before we add any more bits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301183219.2424889-4-peter.maydell@linaro.org --- target/arm/internals.h | 27 +++++++++++++++++++++++++-- target/arm/helper.c | 9 ++++----- 2 files changed, 29 insertions(+), 7 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(VTCR, SL2, 33, 1) #define HSTR_TTEE (1 << 16) #define HSTR_TJDBX (1 << 17) -#define CNTHCTL_CNTVMASK (1 << 18) -#define CNTHCTL_CNTPMASK (1 << 19) +/* + * Depending on the value of HCR_EL2.E2H, bits 0 and 1 + * have different bit definitions, and EL1PCTEN might be + * bit 0 or bit 10. We use _E2H1 and _E2H0 suffixes to + * disambiguate if necessary. + */ +FIELD(CNTHCTL, EL0PCTEN_E2H1, 0, 1) +FIELD(CNTHCTL, EL0VCTEN_E2H1, 1, 1) +FIELD(CNTHCTL, EL1PCTEN_E2H0, 0, 1) +FIELD(CNTHCTL, EL1PCEN_E2H0, 1, 1) +FIELD(CNTHCTL, EVNTEN, 2, 1) +FIELD(CNTHCTL, EVNTDIR, 3, 1) +FIELD(CNTHCTL, EVNTI, 4, 4) +FIELD(CNTHCTL, EL0VTEN, 8, 1) +FIELD(CNTHCTL, EL0PTEN, 9, 1) +FIELD(CNTHCTL, EL1PCTEN_E2H1, 10, 1) +FIELD(CNTHCTL, EL1PTEN, 11, 1) +FIELD(CNTHCTL, ECV, 12, 1) +FIELD(CNTHCTL, EL1TVT, 13, 1) +FIELD(CNTHCTL, EL1TVCT, 14, 1) +FIELD(CNTHCTL, EL1NVPCT, 15, 1) +FIELD(CNTHCTL, EL1NVVCT, 16, 1) +FIELD(CNTHCTL, EVNTIS, 17, 1) +FIELD(CNTHCTL, CNTVMASK, 18, 1) +FIELD(CNTHCTL, CNTPMASK, 19, 1) /* We use a few fake FSR values for internal purposes in M profile. * M profile cores don't have A/R format FSRs, but currently our diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void gt_update_irq(ARMCPU *cpu, int timeridx) * It is RES0 in Secure and NonSecure state. */ if ((ss == ARMSS_Root || ss == ARMSS_Realm) && - ((timeridx == GTIMER_VIRT && (cnthctl & CNTHCTL_CNTVMASK)) || - (timeridx == GTIMER_PHYS && (cnthctl & CNTHCTL_CNTPMASK)))) { + ((timeridx == GTIMER_VIRT && (cnthctl & R_CNTHCTL_CNTVMASK_MASK)) || + (timeridx == GTIMER_PHYS && (cnthctl & R_CNTHCTL_CNTPMASK_MASK)))) { irqstate = 0; } @@ -XXX,XX +XXX,XX @@ static void gt_cnthctl_write(CPUARMState *env, const ARMCPRegInfo *ri, { ARMCPU *cpu = env_archcpu(env); uint32_t oldval = env->cp15.cnthctl_el2; - raw_write(env, ri, value); - if ((oldval ^ value) & CNTHCTL_CNTVMASK) { + if ((oldval ^ value) & R_CNTHCTL_CNTVMASK_MASK) { gt_update_irq(cpu, GTIMER_VIRT); - } else if ((oldval ^ value) & CNTHCTL_CNTPMASK) { + } else if ((oldval ^ value) & R_CNTHCTL_CNTPMASK_MASK) { gt_update_irq(cpu, GTIMER_PHYS); } } -- 2.34.1 Don't allow the guest to write CNTHCTL_EL2 bits which don't exist. This is not strictly architecturally required, but it is how we've tended to implement registers more recently. In particular, bits [19:18] are only present with FEAT_RME, and bits [17:12] will only be present with FEAT_ECV. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301183219.2424889-5-peter.maydell@linaro.org --- target/arm/helper.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void gt_cnthctl_write(CPUARMState *env, const ARMCPRegInfo *ri, { ARMCPU *cpu = env_archcpu(env); uint32_t oldval = env->cp15.cnthctl_el2; + uint32_t valid_mask = + R_CNTHCTL_EL0PCTEN_E2H1_MASK | + R_CNTHCTL_EL0VCTEN_E2H1_MASK | + R_CNTHCTL_EVNTEN_MASK | + R_CNTHCTL_EVNTDIR_MASK | + R_CNTHCTL_EVNTI_MASK | + R_CNTHCTL_EL0VTEN_MASK | + R_CNTHCTL_EL0PTEN_MASK | + R_CNTHCTL_EL1PCTEN_E2H1_MASK | + R_CNTHCTL_EL1PTEN_MASK; + + if (cpu_isar_feature(aa64_rme, cpu)) { + valid_mask |= R_CNTHCTL_CNTVMASK_MASK | R_CNTHCTL_CNTPMASK_MASK; + } + + /* Clear RES0 bits */ + value &= valid_mask; + raw_write(env, ri, value); if ((oldval ^ value) & R_CNTHCTL_CNTVMASK_MASK) { -- 2.34.1 The functionality defined by ID_AA64MMFR0_EL1.ECV == 1 is: * four new trap bits for various counter and timer registers * the CNTHCTL_EL2.EVNTIS and CNTKCTL_EL1.EVNTIS bits which control scaling of the event stream. This is a no-op for us, because we don't implement the event stream (our WFE is a NOP): all we need to do is allow CNTHCTL_EL2.ENVTIS to be read and written. * extensions to PMSCR_EL1.PCT, PMSCR_EL2.PCT, TRFCR_EL1.TS and TRFCR_EL2.TS: these are all no-ops for us, because we don't implement FEAT_SPE or FEAT_TRF. * new registers CNTPCTSS_EL0 and NCTVCTSS_EL0 which are "self-sychronizing" views of the CNTPCT_EL0 and CNTVCT_EL0, meaning that no barriers are needed around their accesses. For us these are just the same as the normal views, because all our sysregs are inherently self-sychronizing. In this commit we implement the trap handling and permit the new CNTHCTL_EL2 bits to be written. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301183219.2424889-6-peter.maydell@linaro.org --- target/arm/cpu-features.h | 5 ++++ target/arm/helper.c | 51 +++++++++++++++++++++++++++++++++++---- 2 files changed, 51 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_fgt(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64mmfr0, ID_AA64MMFR0, FGT) != 0; } +static inline bool isar_feature_aa64_ecv_traps(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64mmfr0, ID_AA64MMFR0, ECV) > 0; +} + static inline bool isar_feature_aa64_vh(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, VH) != 0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, : !extract32(env->cp15.cnthctl_el2, 0, 1))) { return CP_ACCESS_TRAP_EL2; } + if (has_el2 && timeridx == GTIMER_VIRT) { + if (FIELD_EX64(env->cp15.cnthctl_el2, CNTHCTL, EL1TVCT)) { + return CP_ACCESS_TRAP_EL2; + } + } break; } return CP_ACCESS_OK; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_timer_access(CPUARMState *env, int timeridx, } } } + if (has_el2 && timeridx == GTIMER_VIRT) { + if (FIELD_EX64(env->cp15.cnthctl_el2, CNTHCTL, EL1TVT)) { + return CP_ACCESS_TRAP_EL2; + } + } break; } return CP_ACCESS_OK; @@ -XXX,XX +XXX,XX @@ static void gt_cnthctl_write(CPUARMState *env, const ARMCPRegInfo *ri, if (cpu_isar_feature(aa64_rme, cpu)) { valid_mask |= R_CNTHCTL_CNTVMASK_MASK | R_CNTHCTL_CNTPMASK_MASK; } + if (cpu_isar_feature(aa64_ecv_traps, cpu)) { + valid_mask |= + R_CNTHCTL_EL1TVT_MASK | + R_CNTHCTL_EL1TVCT_MASK | + R_CNTHCTL_EL1NVPCT_MASK | + R_CNTHCTL_EL1NVVCT_MASK | + R_CNTHCTL_EVNTIS_MASK; + } /* Clear RES0 bits */ value &= valid_mask; @@ -XXX,XX +XXX,XX @@ static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, { if (arm_current_el(env) == 1) { /* This must be a FEAT_NV access */ - /* TODO: FEAT_ECV will need to check CNTHCTL_EL2 here */ return CP_ACCESS_OK; } if (!(arm_hcr_el2_eff(env) & HCR_E2H)) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +static CPAccessResult access_el1nvpct(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1) { + /* This must be a FEAT_NV access with NVx == 101 */ + if (FIELD_EX64(env->cp15.cnthctl_el2, CNTHCTL, EL1NVPCT)) { + return CP_ACCESS_TRAP_EL2; + } + } + return e2h_access(env, ri, isread); +} + +static CPAccessResult access_el1nvvct(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 1) { + /* This must be a FEAT_NV access with NVx == 101 */ + if (FIELD_EX64(env->cp15.cnthctl_el2, CNTHCTL, EL1NVVCT)) { + return CP_ACCESS_TRAP_EL2; + } + } + return e2h_access(env, ri, isread); +} + /* Test if system register redirection is to occur in the current state. */ static bool redirect_for_e2h(CPUARMState *env) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vhe_reginfo[] = { { .name = "CNTP_CTL_EL02", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 1, .type = ARM_CP_IO | ARM_CP_ALIAS, - .access = PL2_RW, .accessfn = e2h_access, + .access = PL2_RW, .accessfn = access_el1nvpct, .nv2_redirect_offset = 0x180 | NV2_REDIR_NO_NV1, .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl), .writefn = gt_phys_ctl_write, .raw_writefn = raw_write }, { .name = "CNTV_CTL_EL02", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 1, .type = ARM_CP_IO | ARM_CP_ALIAS, - .access = PL2_RW, .accessfn = e2h_access, + .access = PL2_RW, .accessfn = access_el1nvvct, .nv2_redirect_offset = 0x170 | NV2_REDIR_NO_NV1, .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl), .writefn = gt_virt_ctl_write, .raw_writefn = raw_write }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vhe_reginfo[] = { .type = ARM_CP_IO | ARM_CP_ALIAS, .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), .nv2_redirect_offset = 0x178 | NV2_REDIR_NO_NV1, - .access = PL2_RW, .accessfn = e2h_access, + .access = PL2_RW, .accessfn = access_el1nvpct, .writefn = gt_phys_cval_write, .raw_writefn = raw_write }, { .name = "CNTV_CVAL_EL02", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 2, .type = ARM_CP_IO | ARM_CP_ALIAS, .nv2_redirect_offset = 0x168 | NV2_REDIR_NO_NV1, .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), - .access = PL2_RW, .accessfn = e2h_access, + .access = PL2_RW, .accessfn = access_el1nvvct, .writefn = gt_virt_cval_write, .raw_writefn = raw_write }, #endif }; -- 2.34.1 For FEAT_ECV, new registers CNTPCTSS_EL0 and CNTVCTSS_EL0 are defined, which are "self-synchronized" views of the physical and virtual counts as seen in the CNTPCT_EL0 and CNTVCT_EL0 registers (meaning that no barriers are needed around accesses to them to ensure that reads of them do not occur speculatively and out-of-order with other instructions). For QEMU, all our system registers are self-synchronized, so we can simply copy the existing implementation of CNTPCT_EL0 and CNTVCT_EL0 to the new register encodings. This means we now implement all the functionality required for ID_AA64MMFR0_EL1.ECV == 0b0001. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301183219.2424889-7-peter.maydell@linaro.org --- target/arm/helper.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = { }, }; +/* + * FEAT_ECV adds extra views of CNTVCT_EL0 and CNTPCT_EL0 which + * are "self-synchronizing". For QEMU all sysregs are self-synchronizing, + * so our implementations here are identical to the normal registers. + */ +static const ARMCPRegInfo gen_timer_ecv_cp_reginfo[] = { + { .name = "CNTVCTSS", .cp = 15, .crm = 14, .opc1 = 9, + .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO, + .accessfn = gt_vct_access, + .readfn = gt_virt_cnt_read, .resetfn = arm_cp_reset_ignore, + }, + { .name = "CNTVCTSS_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 6, + .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, + .accessfn = gt_vct_access, .readfn = gt_virt_cnt_read, + }, + { .name = "CNTPCTSS", .cp = 15, .crm = 14, .opc1 = 8, + .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO, + .accessfn = gt_pct_access, + .readfn = gt_cnt_read, .resetfn = arm_cp_reset_ignore, + }, + { .name = "CNTPCTSS_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 5, + .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, + .accessfn = gt_pct_access, .readfn = gt_cnt_read, + }, +}; + #else /* @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = { }, }; +/* + * CNTVCTSS_EL0 has the same trap conditions as CNTVCT_EL0, so it also + * is exposed to userspace by Linux. + */ +static const ARMCPRegInfo gen_timer_ecv_cp_reginfo[] = { + { .name = "CNTVCTSS_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 6, + .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, + .readfn = gt_virt_cnt_read, + }, +}; + #endif static void par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (arm_feature(env, ARM_FEATURE_GENERIC_TIMER)) { define_arm_cp_regs(cpu, generic_timer_cp_reginfo); } + if (cpu_isar_feature(aa64_ecv_traps, cpu)) { + define_arm_cp_regs(cpu, gen_timer_ecv_cp_reginfo); + } if (arm_feature(env, ARM_FEATURE_VAPA)) { ARMCPRegInfo vapa_cp_reginfo[] = { { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0, -- 2.34.1 When ID_AA64MMFR0_EL1.ECV is 0b0010, a new register CNTPOFF_EL2 is implemented. This is similar to the existing CNTVOFF_EL2, except that it controls a hypervisor-adjustable offset made to the physical counter and timer. Implement the handling for this register, which includes control/trap bits in SCR_EL3 and CNTHCTL_EL2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301183219.2424889-8-peter.maydell@linaro.org --- target/arm/cpu-features.h | 5 +++ target/arm/cpu.h | 1 + target/arm/helper.c | 68 +++++++++++++++++++++++++++++++++++++-- target/arm/trace-events | 1 + 4 files changed, 73 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_ecv_traps(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64mmfr0, ID_AA64MMFR0, ECV) > 0; } +static inline bool isar_feature_aa64_ecv(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64mmfr0, ID_AA64MMFR0, ECV) > 1; +} + static inline bool isar_feature_aa64_vh(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, VH) != 0; diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint64_t c14_cntkctl; /* Timer Control register */ uint64_t cnthctl_el2; /* Counter/Timer Hyp Control register */ uint64_t cntvoff_el2; /* Counter Virtual Offset register */ + uint64_t cntpoff_el2; /* Counter Physical Offset register */ ARMGenericTimer c14_timer[NUM_GTIMERS]; uint32_t c15_cpar; /* XScale Coprocessor Access Register */ uint32_t c15_ticonfig; /* TI925T configuration byte. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_rme, cpu)) { valid_mask |= SCR_NSE | SCR_GPF; } + if (cpu_isar_feature(aa64_ecv, cpu)) { + valid_mask |= SCR_ECVEN; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { @@ -XXX,XX +XXX,XX @@ void gt_rme_post_el_change(ARMCPU *cpu, void *ignored) gt_update_irq(cpu, GTIMER_PHYS); } +static uint64_t gt_phys_raw_cnt_offset(CPUARMState *env) +{ + if ((env->cp15.scr_el3 & SCR_ECVEN) && + FIELD_EX64(env->cp15.cnthctl_el2, CNTHCTL, ECV) && + arm_is_el2_enabled(env) && + (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { + return env->cp15.cntpoff_el2; + } + return 0; +} + +static uint64_t gt_phys_cnt_offset(CPUARMState *env) +{ + if (arm_current_el(env) >= 2) { + return 0; + } + return gt_phys_raw_cnt_offset(env); +} + static void gt_recalc_timer(ARMCPU *cpu, int timeridx) { ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; @@ -XXX,XX +XXX,XX @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx) * reset timer to when ISTATUS next has to change */ uint64_t offset = timeridx == GTIMER_VIRT ? - cpu->env.cp15.cntvoff_el2 : 0; + cpu->env.cp15.cntvoff_el2 : gt_phys_raw_cnt_offset(&cpu->env); uint64_t count = gt_get_countervalue(&cpu->env); /* Note that this must be unsigned 64 bit arithmetic: */ int istatus = count - offset >= gt->cval; @@ -XXX,XX +XXX,XX @@ static void gt_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) { - return gt_get_countervalue(env); + return gt_get_countervalue(env) - gt_phys_cnt_offset(env); } static uint64_t gt_virt_cnt_offset(CPUARMState *env) @@ -XXX,XX +XXX,XX @@ static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, case GTIMER_HYPVIRT: offset = gt_virt_cnt_offset(env); break; + case GTIMER_PHYS: + offset = gt_phys_cnt_offset(env); + break; } return (uint32_t)(env->cp15.c14_timer[timeridx].cval - @@ -XXX,XX +XXX,XX @@ static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, case GTIMER_HYPVIRT: offset = gt_virt_cnt_offset(env); break; + case GTIMER_PHYS: + offset = gt_phys_cnt_offset(env); + break; } trace_arm_gt_tval_write(timeridx, value); @@ -XXX,XX +XXX,XX @@ static void gt_cnthctl_write(CPUARMState *env, const ARMCPRegInfo *ri, R_CNTHCTL_EL1NVVCT_MASK | R_CNTHCTL_EVNTIS_MASK; } + if (cpu_isar_feature(aa64_ecv, cpu)) { + valid_mask |= R_CNTHCTL_ECV_MASK; + } /* Clear RES0 bits */ value &= valid_mask; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gen_timer_ecv_cp_reginfo[] = { }, }; +static CPAccessResult gt_cntpoff_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + if (arm_current_el(env) == 2 && !(env->cp15.scr_el3 & SCR_ECVEN)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static void gt_cntpoff_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + trace_arm_gt_cntpoff_write(value); + raw_write(env, ri, value); + gt_recalc_timer(cpu, GTIMER_PHYS); +} + +static const ARMCPRegInfo gen_timer_cntpoff_reginfo = { + .name = "CNTPOFF_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 6, + .access = PL2_RW, .type = ARM_CP_IO, .resetvalue = 0, + .accessfn = gt_cntpoff_access, .writefn = gt_cntpoff_write, + .nv2_redirect_offset = 0x1a8, + .fieldoffset = offsetof(CPUARMState, cp15.cntpoff_el2), +}; #else /* @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_ecv_traps, cpu)) { define_arm_cp_regs(cpu, gen_timer_ecv_cp_reginfo); } +#ifndef CONFIG_USER_ONLY + if (cpu_isar_feature(aa64_ecv, cpu)) { + define_one_arm_cp_reg(cpu, &gen_timer_cntpoff_reginfo); + } +#endif if (arm_feature(env, ARM_FEATURE_VAPA)) { ARMCPRegInfo vapa_cp_reginfo[] = { { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0, diff --git a/target/arm/trace-events b/target/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/trace-events +++ b/target/arm/trace-events @@ -XXX,XX +XXX,XX @@ arm_gt_tval_write(int timer, uint64_t value) "gt_tval_write: timer %d value 0x%" arm_gt_ctl_write(int timer, uint64_t value) "gt_ctl_write: timer %d value 0x%" PRIx64 arm_gt_imask_toggle(int timer) "gt_ctl_write: timer %d IMASK toggle" arm_gt_cntvoff_write(uint64_t value) "gt_cntvoff_write: value 0x%" PRIx64 +arm_gt_cntpoff_write(uint64_t value) "gt_cntpoff_write: value 0x%" PRIx64 arm_gt_update_irq(int timer, int irqstate) "gt_update_irq: timer %d irqstate %d" # kvm.c -- 2.34.1 Enable all FEAT_ECV features on the 'max' CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301183219.2424889-9-peter.maydell@linaro.org --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_DoubleFault (Double Fault Extension) - FEAT_E0PD (Preventing EL0 access to halves of address maps) +- FEAT_ECV (Enhanced Counter Virtualization) - FEAT_EPAC (Enhanced pointer authentication) - FEAT_ETS (Enhanced Translation Synchronization) - FEAT_EVT (Enhanced Virtualization Traps) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR0, TGRAN64_2, 2); /* 64k stage2 supported */ t = FIELD_DP64(t, ID_AA64MMFR0, TGRAN4_2, 2); /* 4k stage2 supported */ t = FIELD_DP64(t, ID_AA64MMFR0, FGT, 1); /* FEAT_FGT */ + t = FIELD_DP64(t, ID_AA64MMFR0, ECV, 2); /* FEAT_ECV */ cpu->isar.id_aa64mmfr0 = t; t = cpu->isar.id_aa64mmfr1; -- 2.34.1 From: Inès Varhol <ines.varhol@telecom-paris.fr> Features supported : - the 8 STM32L4x5 GPIOs are initialized with their reset values (except IDR, see below) - input mode : setting a pin in input mode "externally" (using input irqs) results in an out irq (transmitted to SYSCFG) - output mode : setting a bit in ODR sets the corresponding out irq (if this line is configured in output mode) - pull-up, pull-down - push-pull, open-drain Difference with the real GPIOs : - Alternate Function and Analog mode aren't implemented : pins in AF/Analog behave like pins in input mode - floating pins stay at their last value - register IDR reset values differ from the real one : values are coherent with the other registers reset values and the fact that AF/Analog modes aren't implemented - setting I/O output speed isn't supported - locking port bits isn't supported - ADC function isn't supported - GPIOH has 16 pins instead of 2 pins - writing to registers LCKR, AFRL, AFRH and ASCR is ineffective Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240305210444.310665-2-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + docs/system/arm/b-l475e-iot01a.rst | 2 +- include/hw/gpio/stm32l4x5_gpio.h | 70 +++++ hw/gpio/stm32l4x5_gpio.c | 477 +++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/gpio/trace-events | 6 + 7 files changed, 559 insertions(+), 1 deletion(-) create mode 100644 include/hw/gpio/stm32l4x5_gpio.h create mode 100644 hw/gpio/stm32l4x5_gpio.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/stm32l4x5_soc.c F: hw/misc/stm32l4x5_exti.c F: hw/misc/stm32l4x5_syscfg.c F: hw/misc/stm32l4x5_rcc.c +F: hw/gpio/stm32l4x5_gpio.c F: include/hw/*/stm32l4x5_*.h B-L475E-IOT01A IoT Node diff --git a/docs/system/arm/b-l475e-iot01a.rst b/docs/system/arm/b-l475e-iot01a.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/b-l475e-iot01a.rst +++ b/docs/system/arm/b-l475e-iot01a.rst @@ -XXX,XX +XXX,XX @@ Currently B-L475E-IOT01A machine's only supports the following devices: - STM32L4x5 EXTI (Extended interrupts and events controller) - STM32L4x5 SYSCFG (System configuration controller) - STM32L4x5 RCC (Reset and clock control) +- STM32L4x5 GPIOs (General-purpose I/Os) Missing devices """"""""""""""" @@ -XXX,XX +XXX,XX @@ Missing devices The B-L475E-IOT01A does *not* support the following devices: - Serial ports (UART) -- General-purpose I/Os (GPIO) - Analog to Digital Converter (ADC) - SPI controller - Timer controller (TIMER) diff --git a/include/hw/gpio/stm32l4x5_gpio.h b/include/hw/gpio/stm32l4x5_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/stm32l4x5_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4x5 GPIO (General Purpose Input/Ouput) + * + * Copyright (c) 2024 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2024 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html + */ + +#ifndef HW_STM32L4X5_GPIO_H +#define HW_STM32L4X5_GPIO_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_STM32L4X5_GPIO "stm32l4x5-gpio" +OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5GpioState, STM32L4X5_GPIO) + +#define GPIO_NUM_PINS 16 + +struct Stm32l4x5GpioState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + /* GPIO registers */ + uint32_t moder; + uint32_t otyper; + uint32_t ospeedr; + uint32_t pupdr; + uint32_t idr; + uint32_t odr; + uint32_t lckr; + uint32_t afrl; + uint32_t afrh; + uint32_t ascr; + + /* GPIO registers reset values */ + uint32_t moder_reset; + uint32_t ospeedr_reset; + uint32_t pupdr_reset; + + /* + * External driving of pins. + * The pins can be set externally through the device + * anonymous input GPIOs lines under certain conditions. + * The pin must not be in push-pull output mode, + * and can't be set high in open-drain mode. + * Pins driven externally and configured to + * output mode will in general be "disconnected" + * (see `get_gpio_pinmask_to_disconnect()`) + */ + uint16_t disconnected_pins; + uint16_t pins_connected_high; + + char *name; + Clock *clk; + qemu_irq pin[GPIO_NUM_PINS]; +}; + +#endif diff --git a/hw/gpio/stm32l4x5_gpio.c b/hw/gpio/stm32l4x5_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/stm32l4x5_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4x5 GPIO (General Purpose Input/Ouput) + * + * Copyright (c) 2024 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2024 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/gpio/stm32l4x5_gpio.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "qapi/visitor.h" +#include "qapi/error.h" +#include "migration/vmstate.h" +#include "trace.h" + +#define GPIO_MODER 0x00 +#define GPIO_OTYPER 0x04 +#define GPIO_OSPEEDR 0x08 +#define GPIO_PUPDR 0x0C +#define GPIO_IDR 0x10 +#define GPIO_ODR 0x14 +#define GPIO_BSRR 0x18 +#define GPIO_LCKR 0x1C +#define GPIO_AFRL 0x20 +#define GPIO_AFRH 0x24 +#define GPIO_BRR 0x28 +#define GPIO_ASCR 0x2C + +/* 0b11111111_11111111_00000000_00000000 */ +#define RESERVED_BITS_MASK 0xFFFF0000 + +static void update_gpio_idr(Stm32l4x5GpioState *s); + +static bool is_pull_up(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->pupdr, 2 * pin, 2) == 1; +} + +static bool is_pull_down(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->pupdr, 2 * pin, 2) == 2; +} + +static bool is_output(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->moder, 2 * pin, 2) == 1; +} + +static bool is_open_drain(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->otyper, pin, 1) == 1; +} + +static bool is_push_pull(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->otyper, pin, 1) == 0; +} + +static void stm32l4x5_gpio_reset_hold(Object *obj) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + + s->moder = s->moder_reset; + s->otyper = 0x00000000; + s->ospeedr = s->ospeedr_reset; + s->pupdr = s->pupdr_reset; + s->idr = 0x00000000; + s->odr = 0x00000000; + s->lckr = 0x00000000; + s->afrl = 0x00000000; + s->afrh = 0x00000000; + s->ascr = 0x00000000; + + s->disconnected_pins = 0xFFFF; + s->pins_connected_high = 0x0000; + update_gpio_idr(s); +} + +static void stm32l4x5_gpio_set(void *opaque, int line, int level) +{ + Stm32l4x5GpioState *s = opaque; + /* + * The pin isn't set if line is configured in output mode + * except if level is 0 and the output is open-drain. + * This way there will be no short-circuit prone situations. + */ + if (is_output(s, line) && !(is_open_drain(s, line) && (level == 0))) { + qemu_log_mask(LOG_GUEST_ERROR, "Line %d can't be driven externally\n", + line); + return; + } + + s->disconnected_pins &= ~(1 << line); + if (level) { + s->pins_connected_high |= (1 << line); + } else { + s->pins_connected_high &= ~(1 << line); + } + trace_stm32l4x5_gpio_pins(s->name, s->disconnected_pins, + s->pins_connected_high); + update_gpio_idr(s); +} + + +static void update_gpio_idr(Stm32l4x5GpioState *s) +{ + uint32_t new_idr_mask = 0; + uint32_t new_idr = s->odr; + uint32_t old_idr = s->idr; + int new_pin_state, old_pin_state; + + for (int i = 0; i < GPIO_NUM_PINS; i++) { + if (is_output(s, i)) { + if (is_push_pull(s, i)) { + new_idr_mask |= (1 << i); + } else if (!(s->odr & (1 << i))) { + /* open-drain ODR 0 */ + new_idr_mask |= (1 << i); + /* open-drain ODR 1 */ + } else if (!(s->disconnected_pins & (1 << i)) && + !(s->pins_connected_high & (1 << i))) { + /* open-drain ODR 1 with pin connected low */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + /* open-drain ODR 1 with unactive pin */ + } else if (is_pull_up(s, i)) { + new_idr_mask |= (1 << i); + } else if (is_pull_down(s, i)) { + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* + * The only case left is for open-drain ODR 1 + * with unactive pin without pull-up or pull-down : + * the value is floating. + */ + /* input or analog mode with connected pin */ + } else if (!(s->disconnected_pins & (1 << i))) { + if (s->pins_connected_high & (1 << i)) { + /* pin high */ + new_idr_mask |= (1 << i); + new_idr |= (1 << i); + } else { + /* pin low */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* input or analog mode with disconnected pin */ + } else { + if (is_pull_up(s, i)) { + /* pull-up */ + new_idr_mask |= (1 << i); + new_idr |= (1 << i); + } else if (is_pull_down(s, i)) { + /* pull-down */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* + * The only case left is for a disconnected pin + * without pull-up or pull-down : + * the value is floating. + */ + } + } + + s->idr = (old_idr & ~new_idr_mask) | (new_idr & new_idr_mask); + trace_stm32l4x5_gpio_update_idr(s->name, old_idr, s->idr); + + for (int i = 0; i < GPIO_NUM_PINS; i++) { + if (new_idr_mask & (1 << i)) { + new_pin_state = (new_idr & (1 << i)) > 0; + old_pin_state = (old_idr & (1 << i)) > 0; + if (new_pin_state > old_pin_state) { + qemu_irq_raise(s->pin[i]); + } else if (new_pin_state < old_pin_state) { + qemu_irq_lower(s->pin[i]); + } + } + } +} + +/* + * Return mask of pins that are both configured in output + * mode and externally driven (except pins in open-drain + * mode externally set to 0). + */ +static uint32_t get_gpio_pinmask_to_disconnect(Stm32l4x5GpioState *s) +{ + uint32_t pins_to_disconnect = 0; + for (int i = 0; i < GPIO_NUM_PINS; i++) { + /* for each connected pin in output mode */ + if (!(s->disconnected_pins & (1 << i)) && is_output(s, i)) { + /* if either push-pull or high level */ + if (is_push_pull(s, i) || s->pins_connected_high & (1 << i)) { + pins_to_disconnect |= (1 << i); + qemu_log_mask(LOG_GUEST_ERROR, + "Line %d can't be driven externally\n", + i); + } + } + } + return pins_to_disconnect; +} + +/* + * Set field `disconnected_pins` and call `update_gpio_idr()` + */ +static void disconnect_gpio_pins(Stm32l4x5GpioState *s, uint16_t lines) +{ + s->disconnected_pins |= lines; + trace_stm32l4x5_gpio_pins(s->name, s->disconnected_pins, + s->pins_connected_high); + update_gpio_idr(s); +} + +static void disconnected_pins_set(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + uint16_t value; + if (!visit_type_uint16(v, name, &value, errp)) { + return; + } + disconnect_gpio_pins(s, value); +} + +static void disconnected_pins_get(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + visit_type_uint16(v, name, (uint16_t *)opaque, errp); +} + +static void clock_freq_get(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + uint32_t clock_freq_hz = clock_get_hz(s->clk); + visit_type_uint32(v, name, &clock_freq_hz, errp); +} + +static void stm32l4x5_gpio_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5GpioState *s = opaque; + + uint32_t value = val64; + trace_stm32l4x5_gpio_write(s->name, addr, val64); + + switch (addr) { + case GPIO_MODER: + s->moder = value; + disconnect_gpio_pins(s, get_gpio_pinmask_to_disconnect(s)); + qemu_log_mask(LOG_UNIMP, + "%s: Analog and AF modes aren't supported\n\ + Analog and AF mode behave like input mode\n", + __func__); + return; + case GPIO_OTYPER: + s->otyper = value & ~RESERVED_BITS_MASK; + disconnect_gpio_pins(s, get_gpio_pinmask_to_disconnect(s)); + return; + case GPIO_OSPEEDR: + qemu_log_mask(LOG_UNIMP, + "%s: Changing I/O output speed isn't supported\n\ + I/O speed is already maximal\n", + __func__); + s->ospeedr = value; + return; + case GPIO_PUPDR: + s->pupdr = value; + update_gpio_idr(s); + return; + case GPIO_IDR: + qemu_log_mask(LOG_UNIMP, + "%s: GPIO->IDR is read-only\n", + __func__); + return; + case GPIO_ODR: + s->odr = value & ~RESERVED_BITS_MASK; + update_gpio_idr(s); + return; + case GPIO_BSRR: { + uint32_t bits_to_reset = (value & RESERVED_BITS_MASK) >> GPIO_NUM_PINS; + uint32_t bits_to_set = value & ~RESERVED_BITS_MASK; + /* If both BSx and BRx are set, BSx has priority.*/ + s->odr &= ~bits_to_reset; + s->odr |= bits_to_set; + update_gpio_idr(s); + return; + } + case GPIO_LCKR: + qemu_log_mask(LOG_UNIMP, + "%s: Locking port bits configuration isn't supported\n", + __func__); + s->lckr = value & ~RESERVED_BITS_MASK; + return; + case GPIO_AFRL: + qemu_log_mask(LOG_UNIMP, + "%s: Alternate functions aren't supported\n", + __func__); + s->afrl = value; + return; + case GPIO_AFRH: + qemu_log_mask(LOG_UNIMP, + "%s: Alternate functions aren't supported\n", + __func__); + s->afrh = value; + return; + case GPIO_BRR: { + uint32_t bits_to_reset = value & ~RESERVED_BITS_MASK; + s->odr &= ~bits_to_reset; + update_gpio_idr(s); + return; + } + case GPIO_ASCR: + qemu_log_mask(LOG_UNIMP, + "%s: ADC function isn't supported\n", + __func__); + s->ascr = value & ~RESERVED_BITS_MASK; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + } +} + +static uint64_t stm32l4x5_gpio_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5GpioState *s = opaque; + + trace_stm32l4x5_gpio_read(s->name, addr); + + switch (addr) { + case GPIO_MODER: + return s->moder; + case GPIO_OTYPER: + return s->otyper; + case GPIO_OSPEEDR: + return s->ospeedr; + case GPIO_PUPDR: + return s->pupdr; + case GPIO_IDR: + return s->idr; + case GPIO_ODR: + return s->odr; + case GPIO_BSRR: + return 0; + case GPIO_LCKR: + return s->lckr; + case GPIO_AFRL: + return s->afrl; + case GPIO_AFRH: + return s->afrh; + case GPIO_BRR: + return 0; + case GPIO_ASCR: + return s->ascr; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + return 0; + } +} + +static const MemoryRegionOps stm32l4x5_gpio_ops = { + .read = stm32l4x5_gpio_read, + .write = stm32l4x5_gpio_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void stm32l4x5_gpio_init(Object *obj) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_gpio_ops, s, + TYPE_STM32L4X5_GPIO, 0x400); + + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + qdev_init_gpio_out(DEVICE(obj), s->pin, GPIO_NUM_PINS); + qdev_init_gpio_in(DEVICE(obj), stm32l4x5_gpio_set, GPIO_NUM_PINS); + + s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); + + object_property_add(obj, "disconnected-pins", "uint16", + disconnected_pins_get, disconnected_pins_set, + NULL, &s->disconnected_pins); + object_property_add(obj, "clock-freq-hz", "uint32", + clock_freq_get, NULL, NULL, NULL); +} + +static void stm32l4x5_gpio_realize(DeviceState *dev, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(dev); + if (!clock_has_source(s->clk)) { + error_setg(errp, "GPIO: clk input must be connected"); + return; + } +} + +static const VMStateDescription vmstate_stm32l4x5_gpio = { + .name = TYPE_STM32L4X5_GPIO, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]){ + VMSTATE_UINT32(moder, Stm32l4x5GpioState), + VMSTATE_UINT32(otyper, Stm32l4x5GpioState), + VMSTATE_UINT32(ospeedr, Stm32l4x5GpioState), + VMSTATE_UINT32(pupdr, Stm32l4x5GpioState), + VMSTATE_UINT32(idr, Stm32l4x5GpioState), + VMSTATE_UINT32(odr, Stm32l4x5GpioState), + VMSTATE_UINT32(lckr, Stm32l4x5GpioState), + VMSTATE_UINT32(afrl, Stm32l4x5GpioState), + VMSTATE_UINT32(afrh, Stm32l4x5GpioState), + VMSTATE_UINT32(ascr, Stm32l4x5GpioState), + VMSTATE_UINT16(disconnected_pins, Stm32l4x5GpioState), + VMSTATE_UINT16(pins_connected_high, Stm32l4x5GpioState), + VMSTATE_END_OF_LIST() + } +}; + +static Property stm32l4x5_gpio_properties[] = { + DEFINE_PROP_STRING("name", Stm32l4x5GpioState, name), + DEFINE_PROP_UINT32("mode-reset", Stm32l4x5GpioState, moder_reset, 0), + DEFINE_PROP_UINT32("ospeed-reset", Stm32l4x5GpioState, ospeedr_reset, 0), + DEFINE_PROP_UINT32("pupd-reset", Stm32l4x5GpioState, pupdr_reset, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32l4x5_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + device_class_set_props(dc, stm32l4x5_gpio_properties); + dc->vmsd = &vmstate_stm32l4x5_gpio; + dc->realize = stm32l4x5_gpio_realize; + rc->phases.hold = stm32l4x5_gpio_reset_hold; +} + +static const TypeInfo stm32l4x5_gpio_types[] = { + { + .name = TYPE_STM32L4X5_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Stm32l4x5GpioState), + .instance_init = stm32l4x5_gpio_init, + .class_init = stm32l4x5_gpio_class_init, + }, +}; + +DEFINE_TYPES(stm32l4x5_gpio_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config GPIO_PWR config SIFIVE_GPIO bool + +config STM32L4X5_GPIO + bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files( 'bcm2835_gpio.c', 'bcm2838_gpio.c' )) +system_ss.add(when: 'CONFIG_STM32L4X5_SOC', if_true: files('stm32l4x5_gpio.c')) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c')) system_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c')) diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ sifive_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " val # aspeed_gpio.c aspeed_gpio_read(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64 aspeed_gpio_write(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64 + +# stm32l4x5_gpio.c +stm32l4x5_gpio_read(char *gpio, uint64_t addr) "GPIO%s addr: 0x%" PRIx64 " " +stm32l4x5_gpio_write(char *gpio, uint64_t addr, uint64_t data) "GPIO%s addr: 0x%" PRIx64 " val: 0x%" PRIx64 "" +stm32l4x5_gpio_update_idr(char *gpio, uint32_t old_idr, uint32_t new_idr) "GPIO%s from: 0x%x to: 0x%x" +stm32l4x5_gpio_pins(char *gpio, uint16_t disconnected, uint16_t high) "GPIO%s disconnected pins: 0x%x levels: 0x%x" -- 2.34.1 From: Inès Varhol <ines.varhol@telecom-paris.fr> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240305210444.310665-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/stm32l4x5_soc.h | 2 + include/hw/gpio/stm32l4x5_gpio.h | 1 + include/hw/misc/stm32l4x5_syscfg.h | 3 +- hw/arm/stm32l4x5_soc.c | 71 +++++++++++++++++++++++------- hw/misc/stm32l4x5_syscfg.c | 1 + hw/arm/Kconfig | 3 +- 6 files changed, 63 insertions(+), 18 deletions(-) diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32l4x5_soc.h +++ b/include/hw/arm/stm32l4x5_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/stm32l4x5_syscfg.h" #include "hw/misc/stm32l4x5_exti.h" #include "hw/misc/stm32l4x5_rcc.h" +#include "hw/gpio/stm32l4x5_gpio.h" #include "qom/object.h" #define TYPE_STM32L4X5_SOC "stm32l4x5-soc" @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5SocState { OrIRQState exti_or_gates[NUM_EXTI_OR_GATES]; Stm32l4x5SyscfgState syscfg; Stm32l4x5RccState rcc; + Stm32l4x5GpioState gpio[NUM_GPIOS]; MemoryRegion sram1; MemoryRegion sram2; diff --git a/include/hw/gpio/stm32l4x5_gpio.h b/include/hw/gpio/stm32l4x5_gpio.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/gpio/stm32l4x5_gpio.h +++ b/include/hw/gpio/stm32l4x5_gpio.h @@ -XXX,XX +XXX,XX @@ #define TYPE_STM32L4X5_GPIO "stm32l4x5-gpio" OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5GpioState, STM32L4X5_GPIO) +#define NUM_GPIOS 8 #define GPIO_NUM_PINS 16 struct Stm32l4x5GpioState { diff --git a/include/hw/misc/stm32l4x5_syscfg.h b/include/hw/misc/stm32l4x5_syscfg.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/stm32l4x5_syscfg.h +++ b/include/hw/misc/stm32l4x5_syscfg.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qom/object.h" +#include "hw/gpio/stm32l4x5_gpio.h" #define TYPE_STM32L4X5_SYSCFG "stm32l4x5-syscfg" OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5SyscfgState, STM32L4X5_SYSCFG) -#define NUM_GPIOS 8 -#define GPIO_NUM_PINS 16 #define SYSCFG_NUM_EXTICR 4 struct Stm32l4x5SyscfgState { diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32l4x5_soc.c +++ b/hw/arm/stm32l4x5_soc.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/or-irq.h" #include "hw/arm/stm32l4x5_soc.h" +#include "hw/gpio/stm32l4x5_gpio.h" #include "hw/qdev-clock.h" #include "hw/misc/unimp.h" @@ -XXX,XX +XXX,XX @@ static const int exti_or_gate1_lines_in[EXTI_OR_GATE1_NUM_LINES_IN] = { 16, 35, 36, 37, 38, }; +static const struct { + uint32_t addr; + uint32_t moder_reset; + uint32_t ospeedr_reset; + uint32_t pupdr_reset; +} stm32l4x5_gpio_cfg[NUM_GPIOS] = { + { 0x48000000, 0xABFFFFFF, 0x0C000000, 0x64000000 }, + { 0x48000400, 0xFFFFFEBF, 0x00000000, 0x00000100 }, + { 0x48000800, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48000C00, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48001000, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48001400, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48001800, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48001C00, 0x0000000F, 0x00000000, 0x00000000 }, +}; + static void stm32l4x5_soc_initfn(Object *obj) { Stm32l4x5SocState *s = STM32L4X5_SOC(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_initfn(Object *obj) } object_initialize_child(obj, "syscfg", &s->syscfg, TYPE_STM32L4X5_SYSCFG); object_initialize_child(obj, "rcc", &s->rcc, TYPE_STM32L4X5_RCC); + + for (unsigned i = 0; i < NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%c", 'a' + i); + object_initialize_child(obj, name, &s->gpio[i], TYPE_STM32L4X5_GPIO); + } } static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) Stm32l4x5SocState *s = STM32L4X5_SOC(dev_soc); const Stm32l4x5SocClass *sc = STM32L4X5_SOC_GET_CLASS(dev_soc); MemoryRegion *system_memory = get_system_memory(); - DeviceState *armv7m; + DeviceState *armv7m, *dev; SysBusDevice *busdev; + uint32_t pin_index; if (!memory_region_init_rom(&s->flash, OBJECT(dev_soc), "flash", sc->flash_size, errp)) { @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) return; } + /* GPIOs */ + for (unsigned i = 0; i < NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("%c", 'A' + i); + dev = DEVICE(&s->gpio[i]); + qdev_prop_set_string(dev, "name", name); + qdev_prop_set_uint32(dev, "mode-reset", + stm32l4x5_gpio_cfg[i].moder_reset); + qdev_prop_set_uint32(dev, "ospeed-reset", + stm32l4x5_gpio_cfg[i].ospeedr_reset); + qdev_prop_set_uint32(dev, "pupd-reset", + stm32l4x5_gpio_cfg[i].pupdr_reset); + busdev = SYS_BUS_DEVICE(&s->gpio[i]); + g_free(name); + name = g_strdup_printf("gpio%c-out", 'a' + i); + qdev_connect_clock_in(DEVICE(&s->gpio[i]), "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), name)); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, stm32l4x5_gpio_cfg[i].addr); + } + /* System configuration controller */ busdev = SYS_BUS_DEVICE(&s->syscfg); if (!sysbus_realize(busdev, errp)) { return; } sysbus_mmio_map(busdev, 0, SYSCFG_ADDR); - /* - * TODO: when the GPIO device is implemented, connect it - * to SYCFG using `qdev_connect_gpio_out`, NUM_GPIOS and - * GPIO_NUM_PINS. - */ + + for (unsigned i = 0; i < NUM_GPIOS; i++) { + for (unsigned j = 0; j < GPIO_NUM_PINS; j++) { + pin_index = GPIO_NUM_PINS * i + j; + qdev_connect_gpio_out(DEVICE(&s->gpio[i]), j, + qdev_get_gpio_in(DEVICE(&s->syscfg), + pin_index)); + } + } /* EXTI device */ busdev = SYS_BUS_DEVICE(&s->exti); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) } } - for (unsigned i = 0; i < 16; i++) { + for (unsigned i = 0; i < GPIO_NUM_PINS; i++) { qdev_connect_gpio_out(DEVICE(&s->syscfg), i, qdev_get_gpio_in(DEVICE(&s->exti), i)); } @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) /* RESERVED: 0x40024400, 0x7FDBC00 */ /* AHB2 BUS */ - create_unimplemented_device("GPIOA", 0x48000000, 0x400); - create_unimplemented_device("GPIOB", 0x48000400, 0x400); - create_unimplemented_device("GPIOC", 0x48000800, 0x400); - create_unimplemented_device("GPIOD", 0x48000C00, 0x400); - create_unimplemented_device("GPIOE", 0x48001000, 0x400); - create_unimplemented_device("GPIOF", 0x48001400, 0x400); - create_unimplemented_device("GPIOG", 0x48001800, 0x400); - create_unimplemented_device("GPIOH", 0x48001C00, 0x400); /* RESERVED: 0x48002000, 0x7FDBC00 */ create_unimplemented_device("OTG_FS", 0x50000000, 0x40000); create_unimplemented_device("ADC", 0x50040000, 0x400); diff --git a/hw/misc/stm32l4x5_syscfg.c b/hw/misc/stm32l4x5_syscfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_syscfg.c +++ b/hw/misc/stm32l4x5_syscfg.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "migration/vmstate.h" #include "hw/misc/stm32l4x5_syscfg.h" +#include "hw/gpio/stm32l4x5_gpio.h" #define SYSCFG_MEMRMP 0x00 #define SYSCFG_CFGR1 0x04 diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config STM32L4X5_SOC bool select ARM_V7M select OR_IRQ - select STM32L4X5_SYSCFG select STM32L4X5_EXTI + select STM32L4X5_SYSCFG select STM32L4X5_RCC + select STM32L4X5_GPIO config XLNX_ZYNQMP_ARM bool -- 2.34.1 From: Inès Varhol <ines.varhol@telecom-paris.fr> The testcase contains : - `test_idr_reset_value()` : Checks the reset values of MODER, OTYPER, PUPDR, ODR and IDR. - `test_gpio_output_mode()` : Checks that writing a bit in register ODR results in the corresponding pin rising or lowering, if this pin is configured in output mode. - `test_gpio_input_mode()` : Checks that a input pin set high or low externally results in the pin rising and lowering. - `test_pull_up_pull_down()` : Checks that a floating pin in pull-up/down mode is actually high/down. - `test_push_pull()` : Checks that a pin set externally is disconnected when configured in push-pull output mode, and can't be set externally while in this mode. - `test_open_drain()` : Checks that a pin set externally high is disconnected when configured in open-drain output mode, and can't be set high while in this mode. - `test_bsrr_brr()` : Checks that writing to BSRR and BRR has the desired result in ODR. - `test_clock_enable()` : Checks that GPIO clock is at the right frequency after enabling it. Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240305210444.310665-4-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/stm32l4x5_gpio-test.c | 551 ++++++++++++++++++++++++++++++ tests/qtest/meson.build | 3 +- 2 files changed, 553 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/stm32l4x5_gpio-test.c diff --git a/tests/qtest/stm32l4x5_gpio-test.c b/tests/qtest/stm32l4x5_gpio-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/stm32l4x5_gpio-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for STM32L4x5_GPIO + * + * Copyright (c) 2024 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2024 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +#define GPIO_BASE_ADDR 0x48000000 +#define GPIO_SIZE 0x400 +#define NUM_GPIOS 8 +#define NUM_GPIO_PINS 16 + +#define GPIO_A 0x48000000 +#define GPIO_B 0x48000400 +#define GPIO_C 0x48000800 +#define GPIO_D 0x48000C00 +#define GPIO_E 0x48001000 +#define GPIO_F 0x48001400 +#define GPIO_G 0x48001800 +#define GPIO_H 0x48001C00 + +#define MODER 0x00 +#define OTYPER 0x04 +#define PUPDR 0x0C +#define IDR 0x10 +#define ODR 0x14 +#define BSRR 0x18 +#define BRR 0x28 + +#define MODER_INPUT 0 +#define MODER_OUTPUT 1 + +#define PUPDR_NONE 0 +#define PUPDR_PULLUP 1 +#define PUPDR_PULLDOWN 2 + +#define OTYPER_PUSH_PULL 0 +#define OTYPER_OPEN_DRAIN 1 + +const uint32_t moder_reset[NUM_GPIOS] = { + 0xABFFFFFF, + 0xFFFFFEBF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0x0000000F +}; + +const uint32_t pupdr_reset[NUM_GPIOS] = { + 0x64000000, + 0x00000100, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000 +}; + +const uint32_t idr_reset[NUM_GPIOS] = { + 0x0000A000, + 0x00000010, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000 +}; + +static uint32_t gpio_readl(unsigned int gpio, unsigned int offset) +{ + return readl(gpio + offset); +} + +static void gpio_writel(unsigned int gpio, unsigned int offset, uint32_t value) +{ + writel(gpio + offset, value); +} + +static void gpio_set_bit(unsigned int gpio, unsigned int reg, + unsigned int pin, uint32_t value) +{ + uint32_t mask = 0xFFFFFFFF & ~(0x1 << pin); + gpio_writel(gpio, reg, (gpio_readl(gpio, reg) & mask) | value << pin); +} + +static void gpio_set_2bits(unsigned int gpio, unsigned int reg, + unsigned int pin, uint32_t value) +{ + uint32_t offset = 2 * pin; + uint32_t mask = 0xFFFFFFFF & ~(0x3 << offset); + gpio_writel(gpio, reg, (gpio_readl(gpio, reg) & mask) | value << offset); +} + +static unsigned int get_gpio_id(uint32_t gpio_addr) +{ + return (gpio_addr - GPIO_BASE_ADDR) / GPIO_SIZE; +} + +static void gpio_set_irq(unsigned int gpio, int num, int level) +{ + g_autofree char *name = g_strdup_printf("/machine/soc/gpio%c", + get_gpio_id(gpio) + 'a'); + qtest_set_irq_in(global_qtest, name, NULL, num, level); +} + +static void disconnect_all_pins(unsigned int gpio) +{ + g_autofree char *path = g_strdup_printf("/machine/soc/gpio%c", + get_gpio_id(gpio) + 'a'); + QDict *r; + + r = qtest_qmp(global_qtest, "{ 'execute': 'qom-set', 'arguments': " + "{ 'path': %s, 'property': 'disconnected-pins', 'value': %d } }", + path, 0xFFFF); + g_assert_false(qdict_haskey(r, "error")); + qobject_unref(r); +} + +static uint32_t get_disconnected_pins(unsigned int gpio) +{ + g_autofree char *path = g_strdup_printf("/machine/soc/gpio%c", + get_gpio_id(gpio) + 'a'); + uint32_t disconnected_pins = 0; + QDict *r; + + r = qtest_qmp(global_qtest, "{ 'execute': 'qom-get', 'arguments':" + " { 'path': %s, 'property': 'disconnected-pins'} }", path); + g_assert_false(qdict_haskey(r, "error")); + disconnected_pins = qdict_get_int(r, "return"); + qobject_unref(r); + return disconnected_pins; +} + +static uint32_t reset(uint32_t gpio, unsigned int offset) +{ + switch (offset) { + case MODER: + return moder_reset[get_gpio_id(gpio)]; + case PUPDR: + return pupdr_reset[get_gpio_id(gpio)]; + case IDR: + return idr_reset[get_gpio_id(gpio)]; + } + return 0x0; +} + +static void system_reset(void) +{ + QDict *r; + r = qtest_qmp(global_qtest, "{'execute': 'system_reset'}"); + g_assert_false(qdict_haskey(r, "error")); + qobject_unref(r); +} + +static void test_idr_reset_value(void) +{ + /* + * Checks that the values in MODER, OTYPER, PUPDR and ODR + * after reset are correct, and that the value in IDR is + * coherent. + * Since AF and analog modes aren't implemented, IDR reset + * values aren't the same as with a real board. + * + * Register IDR contains the actual values of all GPIO pins. + * Its value depends on the pins' configuration + * (intput/output/analog : register MODER, push-pull/open-drain : + * register OTYPER, pull-up/pull-down/none : register PUPDR) + * and on the values stored in register ODR + * (in case the pin is in output mode). + */ + + gpio_writel(GPIO_A, MODER, 0xDEADBEEF); + gpio_writel(GPIO_A, ODR, 0xDEADBEEF); + gpio_writel(GPIO_A, OTYPER, 0xDEADBEEF); + gpio_writel(GPIO_A, PUPDR, 0xDEADBEEF); + + gpio_writel(GPIO_B, MODER, 0xDEADBEEF); + gpio_writel(GPIO_B, ODR, 0xDEADBEEF); + gpio_writel(GPIO_B, OTYPER, 0xDEADBEEF); + gpio_writel(GPIO_B, PUPDR, 0xDEADBEEF); + + gpio_writel(GPIO_C, MODER, 0xDEADBEEF); + gpio_writel(GPIO_C, ODR, 0xDEADBEEF); + gpio_writel(GPIO_C, OTYPER, 0xDEADBEEF); + gpio_writel(GPIO_C, PUPDR, 0xDEADBEEF); + + gpio_writel(GPIO_H, MODER, 0xDEADBEEF); + gpio_writel(GPIO_H, ODR, 0xDEADBEEF); + gpio_writel(GPIO_H, OTYPER, 0xDEADBEEF); + gpio_writel(GPIO_H, PUPDR, 0xDEADBEEF); + + system_reset(); + + uint32_t moder = gpio_readl(GPIO_A, MODER); + uint32_t odr = gpio_readl(GPIO_A, ODR); + uint32_t otyper = gpio_readl(GPIO_A, OTYPER); + uint32_t pupdr = gpio_readl(GPIO_A, PUPDR); + uint32_t idr = gpio_readl(GPIO_A, IDR); + /* 15: AF, 14: AF, 13: AF, 12: Analog ... */ + /* here AF is the same as Analog and Input mode */ + g_assert_cmphex(moder, ==, reset(GPIO_A, MODER)); + g_assert_cmphex(odr, ==, reset(GPIO_A, ODR)); + g_assert_cmphex(otyper, ==, reset(GPIO_A, OTYPER)); + /* 15: pull-up, 14: pull-down, 13: pull-up, 12: neither ... */ + g_assert_cmphex(pupdr, ==, reset(GPIO_A, PUPDR)); + /* 15 : 1, 14: 0, 13: 1, 12 : reset value ... */ + g_assert_cmphex(idr, ==, reset(GPIO_A, IDR)); + + moder = gpio_readl(GPIO_B, MODER); + odr = gpio_readl(GPIO_B, ODR); + otyper = gpio_readl(GPIO_B, OTYPER); + pupdr = gpio_readl(GPIO_B, PUPDR); + idr = gpio_readl(GPIO_B, IDR); + /* ... 5: Analog, 4: AF, 3: AF, 2: Analog ... */ + /* here AF is the same as Analog and Input mode */ + g_assert_cmphex(moder, ==, reset(GPIO_B, MODER)); + g_assert_cmphex(odr, ==, reset(GPIO_B, ODR)); + g_assert_cmphex(otyper, ==, reset(GPIO_B, OTYPER)); + /* ... 5: neither, 4: pull-up, 3: neither ... */ + g_assert_cmphex(pupdr, ==, reset(GPIO_B, PUPDR)); + /* ... 5 : reset value, 4 : 1, 3 : reset value ... */ + g_assert_cmphex(idr, ==, reset(GPIO_B, IDR)); + + moder = gpio_readl(GPIO_C, MODER); + odr = gpio_readl(GPIO_C, ODR); + otyper = gpio_readl(GPIO_C, OTYPER); + pupdr = gpio_readl(GPIO_C, PUPDR); + idr = gpio_readl(GPIO_C, IDR); + /* Analog, same as Input mode*/ + g_assert_cmphex(moder, ==, reset(GPIO_C, MODER)); + g_assert_cmphex(odr, ==, reset(GPIO_C, ODR)); + g_assert_cmphex(otyper, ==, reset(GPIO_C, OTYPER)); + /* no pull-up or pull-down */ + g_assert_cmphex(pupdr, ==, reset(GPIO_C, PUPDR)); + /* reset value */ + g_assert_cmphex(idr, ==, reset(GPIO_C, IDR)); + + moder = gpio_readl(GPIO_H, MODER); + odr = gpio_readl(GPIO_H, ODR); + otyper = gpio_readl(GPIO_H, OTYPER); + pupdr = gpio_readl(GPIO_H, PUPDR); + idr = gpio_readl(GPIO_H, IDR); + /* Analog, same as Input mode */ + g_assert_cmphex(moder, ==, reset(GPIO_H, MODER)); + g_assert_cmphex(odr, ==, reset(GPIO_H, ODR)); + g_assert_cmphex(otyper, ==, reset(GPIO_H, OTYPER)); + /* no pull-up or pull-down */ + g_assert_cmphex(pupdr, ==, reset(GPIO_H, PUPDR)); + /* reset value */ + g_assert_cmphex(idr, ==, reset(GPIO_H, IDR)); +} + +static void test_gpio_output_mode(const void *data) +{ + /* + * Checks that setting a bit in ODR sets the corresponding + * GPIO line high : it should set the right bit in IDR + * and send an irq to syscfg. + * Additionally, it checks that values written to ODR + * when not in output mode are stored and not discarded. + */ + unsigned int pin = ((uint64_t)data) & 0xF; + uint32_t gpio = ((uint64_t)data) >> 32; + unsigned int gpio_id = get_gpio_id(gpio); + + qtest_irq_intercept_in(global_qtest, "/machine/soc/syscfg"); + + /* Set a bit in ODR and check nothing happens */ + gpio_set_bit(gpio, ODR, pin, 1); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR)); + g_assert_false(get_irq(gpio_id * NUM_GPIO_PINS + pin)); + + /* Configure the relevant line as output and check the pin is high */ + gpio_set_2bits(gpio, MODER, pin, MODER_OUTPUT); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) | (1 << pin)); + g_assert_true(get_irq(gpio_id * NUM_GPIO_PINS + pin)); + + /* Reset the bit in ODR and check the pin is low */ + gpio_set_bit(gpio, ODR, pin, 0); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) & ~(1 << pin)); + g_assert_false(get_irq(gpio_id * NUM_GPIO_PINS + pin)); + + /* Clean the test */ + gpio_writel(gpio, ODR, reset(gpio, ODR)); + gpio_writel(gpio, MODER, reset(gpio, MODER)); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR)); + g_assert_false(get_irq(gpio_id * NUM_GPIO_PINS + pin)); +} + +static void test_gpio_input_mode(const void *data) +{ + /* + * Test that setting a line high/low externally sets the + * corresponding GPIO line high/low : it should set the + * right bit in IDR and send an irq to syscfg. + */ + unsigned int pin = ((uint64_t)data) & 0xF; + uint32_t gpio = ((uint64_t)data) >> 32; + unsigned int gpio_id = get_gpio_id(gpio); + + qtest_irq_intercept_in(global_qtest, "/machine/soc/syscfg"); + + /* Configure a line as input, raise it, and check that the pin is high */ + gpio_set_2bits(gpio, MODER, pin, MODER_INPUT); + gpio_set_irq(gpio, pin, 1); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) | (1 << pin)); + g_assert_true(get_irq(gpio_id * NUM_GPIO_PINS + pin)); + + /* Lower the line and check that the pin is low */ + gpio_set_irq(gpio, pin, 0); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) & ~(1 << pin)); + g_assert_false(get_irq(gpio_id * NUM_GPIO_PINS + pin)); + + /* Clean the test */ + gpio_writel(gpio, MODER, reset(gpio, MODER)); + disconnect_all_pins(gpio); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR)); +} + +static void test_pull_up_pull_down(const void *data) +{ + /* + * Test that a floating pin with pull-up sets the pin + * high and vice-versa. + */ + unsigned int pin = ((uint64_t)data) & 0xF; + uint32_t gpio = ((uint64_t)data) >> 32; + unsigned int gpio_id = get_gpio_id(gpio); + + qtest_irq_intercept_in(global_qtest, "/machine/soc/syscfg"); + + /* Configure a line as input with pull-up, check the line is set high */ + gpio_set_2bits(gpio, MODER, pin, MODER_INPUT); + gpio_set_2bits(gpio, PUPDR, pin, PUPDR_PULLUP); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) | (1 << pin)); + g_assert_true(get_irq(gpio_id * NUM_GPIO_PINS + pin)); + + /* Configure the line with pull-down, check the line is low */ + gpio_set_2bits(gpio, PUPDR, pin, PUPDR_PULLDOWN); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) & ~(1 << pin)); + g_assert_false(get_irq(gpio_id * NUM_GPIO_PINS + pin)); + + /* Clean the test */ + gpio_writel(gpio, MODER, reset(gpio, MODER)); + gpio_writel(gpio, PUPDR, reset(gpio, PUPDR)); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR)); +} + +static void test_push_pull(const void *data) +{ + /* + * Test that configuring a line in push-pull output mode + * disconnects the pin, that the pin can't be set or reset + * externally afterwards. + */ + unsigned int pin = ((uint64_t)data) & 0xF; + uint32_t gpio = ((uint64_t)data) >> 32; + uint32_t gpio2 = GPIO_BASE_ADDR + (GPIO_H - gpio); + + qtest_irq_intercept_in(global_qtest, "/machine/soc/syscfg"); + + /* Setting a line high externally, configuring it in push-pull output */ + /* And checking the pin was disconnected */ + gpio_set_irq(gpio, pin, 1); + gpio_set_2bits(gpio, MODER, pin, MODER_OUTPUT); + g_assert_cmphex(get_disconnected_pins(gpio), ==, 0xFFFF); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) & ~(1 << pin)); + + /* Setting a line low externally, configuring it in push-pull output */ + /* And checking the pin was disconnected */ + gpio_set_irq(gpio2, pin, 0); + gpio_set_bit(gpio2, ODR, pin, 1); + gpio_set_2bits(gpio2, MODER, pin, MODER_OUTPUT); + g_assert_cmphex(get_disconnected_pins(gpio2), ==, 0xFFFF); + g_assert_cmphex(gpio_readl(gpio2, IDR), ==, reset(gpio2, IDR) | (1 << pin)); + + /* Trying to set a push-pull output pin, checking it doesn't work */ + gpio_set_irq(gpio, pin, 1); + g_assert_cmphex(get_disconnected_pins(gpio), ==, 0xFFFF); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) & ~(1 << pin)); + + /* Trying to reset a push-pull output pin, checking it doesn't work */ + gpio_set_irq(gpio2, pin, 0); + g_assert_cmphex(get_disconnected_pins(gpio2), ==, 0xFFFF); + g_assert_cmphex(gpio_readl(gpio2, IDR), ==, reset(gpio2, IDR) | (1 << pin)); + + /* Clean the test */ + gpio_writel(gpio, MODER, reset(gpio, MODER)); + gpio_writel(gpio2, ODR, reset(gpio2, ODR)); + gpio_writel(gpio2, MODER, reset(gpio2, MODER)); +} + +static void test_open_drain(const void *data) +{ + /* + * Test that configuring a line in open-drain output mode + * disconnects a pin set high externally and that the pin + * can't be set high externally while configured in open-drain. + * + * However a pin set low externally shouldn't be disconnected, + * and it can be set low externally when in open-drain mode. + */ + unsigned int pin = ((uint64_t)data) & 0xF; + uint32_t gpio = ((uint64_t)data) >> 32; + uint32_t gpio2 = GPIO_BASE_ADDR + (GPIO_H - gpio); + + qtest_irq_intercept_in(global_qtest, "/machine/soc/syscfg"); + + /* Setting a line high externally, configuring it in open-drain output */ + /* And checking the pin was disconnected */ + gpio_set_irq(gpio, pin, 1); + gpio_set_bit(gpio, OTYPER, pin, OTYPER_OPEN_DRAIN); + gpio_set_2bits(gpio, MODER, pin, MODER_OUTPUT); + g_assert_cmphex(get_disconnected_pins(gpio), ==, 0xFFFF); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) & ~(1 << pin)); + + /* Setting a line low externally, configuring it in open-drain output */ + /* And checking the pin wasn't disconnected */ + gpio_set_irq(gpio2, pin, 0); + gpio_set_bit(gpio2, ODR, pin, 1); + gpio_set_bit(gpio2, OTYPER, pin, OTYPER_OPEN_DRAIN); + gpio_set_2bits(gpio2, MODER, pin, MODER_OUTPUT); + g_assert_cmphex(get_disconnected_pins(gpio2), ==, 0xFFFF & ~(1 << pin)); + g_assert_cmphex(gpio_readl(gpio2, IDR), ==, + reset(gpio2, IDR) & ~(1 << pin)); + + /* Trying to set a open-drain output pin, checking it doesn't work */ + gpio_set_irq(gpio, pin, 1); + g_assert_cmphex(get_disconnected_pins(gpio), ==, 0xFFFF); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR) & ~(1 << pin)); + + /* Trying to reset a open-drain output pin, checking it works */ + gpio_set_bit(gpio, ODR, pin, 1); + gpio_set_irq(gpio, pin, 0); + g_assert_cmphex(get_disconnected_pins(gpio2), ==, 0xFFFF & ~(1 << pin)); + g_assert_cmphex(gpio_readl(gpio2, IDR), ==, + reset(gpio2, IDR) & ~(1 << pin)); + + /* Clean the test */ + disconnect_all_pins(gpio2); + gpio_writel(gpio2, OTYPER, reset(gpio2, OTYPER)); + gpio_writel(gpio2, ODR, reset(gpio2, ODR)); + gpio_writel(gpio2, MODER, reset(gpio2, MODER)); + g_assert_cmphex(gpio_readl(gpio2, IDR), ==, reset(gpio2, IDR)); + disconnect_all_pins(gpio); + gpio_writel(gpio, OTYPER, reset(gpio, OTYPER)); + gpio_writel(gpio, ODR, reset(gpio, ODR)); + gpio_writel(gpio, MODER, reset(gpio, MODER)); + g_assert_cmphex(gpio_readl(gpio, IDR), ==, reset(gpio, IDR)); +} + +static void test_bsrr_brr(const void *data) +{ + /* + * Test that writing a '1' in BSS and BSRR + * has the desired effect on ODR. + * In BSRR, BSx has priority over BRx. + */ + unsigned int pin = ((uint64_t)data) & 0xF; + uint32_t gpio = ((uint64_t)data) >> 32; + + gpio_writel(gpio, BSRR, (1 << pin)); + g_assert_cmphex(gpio_readl(gpio, ODR), ==, reset(gpio, ODR) | (1 << pin)); + + gpio_writel(gpio, BSRR, (1 << (pin + NUM_GPIO_PINS))); + g_assert_cmphex(gpio_readl(gpio, ODR), ==, reset(gpio, ODR)); + + gpio_writel(gpio, BSRR, (1 << pin)); + g_assert_cmphex(gpio_readl(gpio, ODR), ==, reset(gpio, ODR) | (1 << pin)); + + gpio_writel(gpio, BRR, (1 << pin)); + g_assert_cmphex(gpio_readl(gpio, ODR), ==, reset(gpio, ODR)); + + /* BSx should have priority over BRx */ + gpio_writel(gpio, BSRR, (1 << pin) | (1 << (pin + NUM_GPIO_PINS))); + g_assert_cmphex(gpio_readl(gpio, ODR), ==, reset(gpio, ODR) | (1 << pin)); + + gpio_writel(gpio, BRR, (1 << pin)); + g_assert_cmphex(gpio_readl(gpio, ODR), ==, reset(gpio, ODR)); + + gpio_writel(gpio, ODR, reset(gpio, ODR)); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + qtest_add_func("stm32l4x5/gpio/test_idr_reset_value", + test_idr_reset_value); + /* + * The inputs for the tests (gpio and pin) can be changed, + * but the tests don't work for pins that are high at reset + * (GPIOA15, GPIO13 and GPIOB5). + * Specifically, rising the pin then checking `get_irq()` + * is problematic since the pin was already high. + */ + qtest_add_data_func("stm32l4x5/gpio/test_gpioc5_output_mode", + (void *)((uint64_t)GPIO_C << 32 | 5), + test_gpio_output_mode); + qtest_add_data_func("stm32l4x5/gpio/test_gpioh3_output_mode", + (void *)((uint64_t)GPIO_H << 32 | 3), + test_gpio_output_mode); + qtest_add_data_func("stm32l4x5/gpio/test_gpio_input_mode1", + (void *)((uint64_t)GPIO_D << 32 | 6), + test_gpio_input_mode); + qtest_add_data_func("stm32l4x5/gpio/test_gpio_input_mode2", + (void *)((uint64_t)GPIO_C << 32 | 10), + test_gpio_input_mode); + qtest_add_data_func("stm32l4x5/gpio/test_gpio_pull_up_pull_down1", + (void *)((uint64_t)GPIO_B << 32 | 5), + test_pull_up_pull_down); + qtest_add_data_func("stm32l4x5/gpio/test_gpio_pull_up_pull_down2", + (void *)((uint64_t)GPIO_F << 32 | 1), + test_pull_up_pull_down); + qtest_add_data_func("stm32l4x5/gpio/test_gpio_push_pull1", + (void *)((uint64_t)GPIO_G << 32 | 6), + test_push_pull); + qtest_add_data_func("stm32l4x5/gpio/test_gpio_push_pull2", + (void *)((uint64_t)GPIO_H << 32 | 3), + test_push_pull); + qtest_add_data_func("stm32l4x5/gpio/test_gpio_open_drain1", + (void *)((uint64_t)GPIO_C << 32 | 4), + test_open_drain); + qtest_add_data_func("stm32l4x5/gpio/test_gpio_open_drain2", + (void *)((uint64_t)GPIO_E << 32 | 11), + test_open_drain); + qtest_add_data_func("stm32l4x5/gpio/test_bsrr_brr1", + (void *)((uint64_t)GPIO_A << 32 | 12), + test_bsrr_brr); + qtest_add_data_func("stm32l4x5/gpio/test_bsrr_brr2", + (void *)((uint64_t)GPIO_D << 32 | 0), + test_bsrr_brr); + + qtest_start("-machine b-l475e-iot01a"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aspeed = \ qtests_stm32l4x5 = \ ['stm32l4x5_exti-test', 'stm32l4x5_syscfg-test', - 'stm32l4x5_rcc-test'] + 'stm32l4x5_rcc-test', + 'stm32l4x5_gpio-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> While the 8-bit input elements are sequential in the input vector, the 32-bit output elements are not sequential in the output matrix. Do not attempt to compute 2 32-bit outputs at the same time. Cc: qemu-stable@nongnu.org Fixes: 23a5e3859f5 ("target/arm: Implement SME integer outer product") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2083 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240305163931.242795-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/sme_helper.c | 77 ++++++++++++++++++------------- tests/tcg/aarch64/sme-smopa-1.c | 47 +++++++++++++++++++ tests/tcg/aarch64/sme-smopa-2.c | 54 ++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 2 +- 4 files changed, 147 insertions(+), 33 deletions(-) create mode 100644 tests/tcg/aarch64/sme-smopa-1.c create mode 100644 tests/tcg/aarch64/sme-smopa-2.c diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sme_helper.c +++ b/target/arm/tcg/sme_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sme_bfmopa)(void *vza, void *vzn, void *vzm, void *vpn, } } -typedef uint64_t IMOPFn(uint64_t, uint64_t, uint64_t, uint8_t, bool); +typedef uint32_t IMOPFn32(uint32_t, uint32_t, uint32_t, uint8_t, bool); +static inline void do_imopa_s(uint32_t *za, uint32_t *zn, uint32_t *zm, + uint8_t *pn, uint8_t *pm, + uint32_t desc, IMOPFn32 *fn) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 4; + bool neg = simd_data(desc); -static inline void do_imopa(uint64_t *za, uint64_t *zn, uint64_t *zm, - uint8_t *pn, uint8_t *pm, - uint32_t desc, IMOPFn *fn) + for (row = 0; row < oprsz; ++row) { + uint8_t pa = (pn[H1(row >> 1)] >> ((row & 1) * 4)) & 0xf; + uint32_t *za_row = &za[tile_vslice_index(row)]; + uint32_t n = zn[H4(row)]; + + for (col = 0; col < oprsz; ++col) { + uint8_t pb = pm[H1(col >> 1)] >> ((col & 1) * 4); + uint32_t *a = &za_row[H4(col)]; + + *a = fn(n, zm[H4(col)], *a, pa & pb, neg); + } + } +} + +typedef uint64_t IMOPFn64(uint64_t, uint64_t, uint64_t, uint8_t, bool); +static inline void do_imopa_d(uint64_t *za, uint64_t *zn, uint64_t *zm, + uint8_t *pn, uint8_t *pm, + uint32_t desc, IMOPFn64 *fn) { intptr_t row, col, oprsz = simd_oprsz(desc) / 8; bool neg = simd_data(desc); @@ -XXX,XX +XXX,XX @@ static inline void do_imopa(uint64_t *za, uint64_t *zn, uint64_t *zm, } #define DEF_IMOP_32(NAME, NTYPE, MTYPE) \ -static uint64_t NAME(uint64_t n, uint64_t m, uint64_t a, uint8_t p, bool neg) \ +static uint32_t NAME(uint32_t n, uint32_t m, uint32_t a, uint8_t p, bool neg) \ { \ - uint32_t sum0 = 0, sum1 = 0; \ + uint32_t sum = 0; \ /* Apply P to N as a mask, making the inactive elements 0. */ \ n &= expand_pred_b(p); \ - sum0 += (NTYPE)(n >> 0) * (MTYPE)(m >> 0); \ - sum0 += (NTYPE)(n >> 8) * (MTYPE)(m >> 8); \ - sum0 += (NTYPE)(n >> 16) * (MTYPE)(m >> 16); \ - sum0 += (NTYPE)(n >> 24) * (MTYPE)(m >> 24); \ - sum1 += (NTYPE)(n >> 32) * (MTYPE)(m >> 32); \ - sum1 += (NTYPE)(n >> 40) * (MTYPE)(m >> 40); \ - sum1 += (NTYPE)(n >> 48) * (MTYPE)(m >> 48); \ - sum1 += (NTYPE)(n >> 56) * (MTYPE)(m >> 56); \ - if (neg) { \ - sum0 = (uint32_t)a - sum0, sum1 = (uint32_t)(a >> 32) - sum1; \ - } else { \ - sum0 = (uint32_t)a + sum0, sum1 = (uint32_t)(a >> 32) + sum1; \ - } \ - return ((uint64_t)sum1 << 32) | sum0; \ + sum += (NTYPE)(n >> 0) * (MTYPE)(m >> 0); \ + sum += (NTYPE)(n >> 8) * (MTYPE)(m >> 8); \ + sum += (NTYPE)(n >> 16) * (MTYPE)(m >> 16); \ + sum += (NTYPE)(n >> 24) * (MTYPE)(m >> 24); \ + return neg ? a - sum : a + sum; \ } #define DEF_IMOP_64(NAME, NTYPE, MTYPE) \ @@ -XXX,XX +XXX,XX @@ DEF_IMOP_64(umopa_d, uint16_t, uint16_t) DEF_IMOP_64(sumopa_d, int16_t, uint16_t) DEF_IMOP_64(usmopa_d, uint16_t, int16_t) -#define DEF_IMOPH(NAME) \ - void HELPER(sme_##NAME)(void *vza, void *vzn, void *vzm, void *vpn, \ - void *vpm, uint32_t desc) \ - { do_imopa(vza, vzn, vzm, vpn, vpm, desc, NAME); } +#define DEF_IMOPH(NAME, S) \ + void HELPER(sme_##NAME##_##S)(void *vza, void *vzn, void *vzm, \ + void *vpn, void *vpm, uint32_t desc) \ + { do_imopa_##S(vza, vzn, vzm, vpn, vpm, desc, NAME##_##S); } -DEF_IMOPH(smopa_s) -DEF_IMOPH(umopa_s) -DEF_IMOPH(sumopa_s) -DEF_IMOPH(usmopa_s) -DEF_IMOPH(smopa_d) -DEF_IMOPH(umopa_d) -DEF_IMOPH(sumopa_d) -DEF_IMOPH(usmopa_d) +DEF_IMOPH(smopa, s) +DEF_IMOPH(umopa, s) +DEF_IMOPH(sumopa, s) +DEF_IMOPH(usmopa, s) + +DEF_IMOPH(smopa, d) +DEF_IMOPH(umopa, d) +DEF_IMOPH(sumopa, d) +DEF_IMOPH(usmopa, d) diff --git a/tests/tcg/aarch64/sme-smopa-1.c b/tests/tcg/aarch64/sme-smopa-1.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/sme-smopa-1.c @@ -XXX,XX +XXX,XX @@ +#include <stdio.h> +#include <string.h> + +int main() +{ + static const int cmp[4][4] = { + { 110, 134, 158, 182 }, + { 390, 478, 566, 654 }, + { 670, 822, 974, 1126 }, + { 950, 1166, 1382, 1598 } + }; + int dst[4][4]; + int *tmp = &dst[0][0]; + + asm volatile( + ".arch armv8-r+sme\n\t" + "smstart\n\t" + "index z0.b, #0, #1\n\t" + "movprfx z1, z0\n\t" + "add z1.b, z1.b, #16\n\t" + "ptrue p0.b\n\t" + "smopa za0.s, p0/m, p0/m, z0.b, z1.b\n\t" + "ptrue p0.s, vl4\n\t" + "mov w12, #0\n\t" + "st1w { za0h.s[w12, #0] }, p0, [%0]\n\t" + "add %0, %0, #16\n\t" + "st1w { za0h.s[w12, #1] }, p0, [%0]\n\t" + "add %0, %0, #16\n\t" + "st1w { za0h.s[w12, #2] }, p0, [%0]\n\t" + "add %0, %0, #16\n\t" + "st1w { za0h.s[w12, #3] }, p0, [%0]\n\t" + "smstop" + : "+r"(tmp) : : "memory"); + + if (memcmp(cmp, dst, sizeof(dst)) == 0) { + return 0; + } + + /* See above for correct results. */ + for (int i = 0; i < 4; ++i) { + for (int j = 0; j < 4; ++j) { + printf("%6d", dst[i][j]); + } + printf("\n"); + } + return 1; +} diff --git a/tests/tcg/aarch64/sme-smopa-2.c b/tests/tcg/aarch64/sme-smopa-2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/sme-smopa-2.c @@ -XXX,XX +XXX,XX @@ +#include <stdio.h> +#include <string.h> + +int main() +{ + static const long cmp[4][4] = { + { 110, 134, 158, 182 }, + { 390, 478, 566, 654 }, + { 670, 822, 974, 1126 }, + { 950, 1166, 1382, 1598 } + }; + long dst[4][4]; + long *tmp = &dst[0][0]; + long svl; + + /* Validate that we have a wide enough vector for 4 elements. */ + asm(".arch armv8-r+sme-i64\n\trdsvl %0, #1" : "=r"(svl)); + if (svl < 32) { + return 0; + } + + asm volatile( + "smstart\n\t" + "index z0.h, #0, #1\n\t" + "movprfx z1, z0\n\t" + "add z1.h, z1.h, #16\n\t" + "ptrue p0.b\n\t" + "smopa za0.d, p0/m, p0/m, z0.h, z1.h\n\t" + "ptrue p0.d, vl4\n\t" + "mov w12, #0\n\t" + "st1d { za0h.d[w12, #0] }, p0, [%0]\n\t" + "add %0, %0, #32\n\t" + "st1d { za0h.d[w12, #1] }, p0, [%0]\n\t" + "mov w12, #2\n\t" + "add %0, %0, #32\n\t" + "st1d { za0h.d[w12, #0] }, p0, [%0]\n\t" + "add %0, %0, #32\n\t" + "st1d { za0h.d[w12, #1] }, p0, [%0]\n\t" + "smstop" + : "+r"(tmp) : : "memory"); + + if (memcmp(cmp, dst, sizeof(dst)) == 0) { + return 0; + } + + /* See above for correct results. */ + for (int i = 0; i < 4; ++i) { + for (int j = 0; j < 4; ++j) { + printf("%6ld", dst[i][j]); + } + printf("\n"); + } + return 1; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ endif # SME Tests ifneq ($(CROSS_AS_HAS_ARMV9_SME),) -AARCH64_TESTS += sme-outprod1 +AARCH64_TESTS += sme-outprod1 sme-smopa-1 sme-smopa-2 endif # System Registers Tests -- 2.34.1 The sun4v RTC device model added under commit a0e893039cf2ce0 in 2016 was unfortunately added with a license of GPL-v3-or-later, which is not compatible with other QEMU code which has a GPL-v2-only license. Relicense the code in the .c and the .h file to GPL-v2-or-later, to make it compatible with the rest of QEMU. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini (for Red Hat) <pbonzini@redhat.com> Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240223161300.938542-1-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/rtc/sun4v-rtc.h | 2 +- hw/rtc/sun4v-rtc.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/hw/rtc/sun4v-rtc.h b/include/hw/rtc/sun4v-rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/rtc/sun4v-rtc.h +++ b/include/hw/rtc/sun4v-rtc.h @@ -XXX,XX +XXX,XX @@ * * Copyright (c) 2016 Artyom Tarasenko * - * This code is licensed under the GNU GPL v3 or (at your option) any later + * This code is licensed under the GNU GPL v2 or (at your option) any later * version. */ diff --git a/hw/rtc/sun4v-rtc.c b/hw/rtc/sun4v-rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/sun4v-rtc.c +++ b/hw/rtc/sun4v-rtc.c @@ -XXX,XX +XXX,XX @@ * * Copyright (c) 2016 Artyom Tarasenko * - * This code is licensed under the GNU GPL v3 or (at your option) any later + * This code is licensed under the GNU GPL v2 or (at your option) any later * version. */ -- 2.34.1 From: Thomas Huth <thuth@redhat.com> Move the code to a separate file so that we do not have to compile it anymore if CONFIG_ARM_V7M is not set. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 20240308141051.536599-2-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu-v7m.c | 290 +++++++++++++++++++++++++++++++++++++ target/arm/tcg/cpu32.c | 261 --------------------------------- target/arm/meson.build | 3 + target/arm/tcg/meson.build | 3 + 4 files changed, 296 insertions(+), 261 deletions(-) create mode 100644 target/arm/tcg/cpu-v7m.c diff --git a/target/arm/tcg/cpu-v7m.c b/target/arm/tcg/cpu-v7m.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/tcg/cpu-v7m.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARMv7-M TCG-only CPUs. + * + * Copyright (c) 2012 SUSE LINUX Products GmbH + * + * This code is licensed under the GNU GPL v2 or later. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "hw/core/tcg-cpu-ops.h" +#include "internals.h" + +#if !defined(CONFIG_USER_ONLY) + +#include "hw/intc/armv7m_nvic.h" + +static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request) +{ + CPUClass *cc = CPU_GET_CLASS(cs); + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + bool ret = false; + + /* + * ARMv7-M interrupt masking works differently than -A or -R. + * There is no FIQ/IRQ distinction. Instead of I and F bits + * masking FIQ and IRQ interrupts, an exception is taken only + * if it is higher priority than the current execution priority + * (which depends on state like BASEPRI, FAULTMASK and the + * currently active exception). + */ + if (interrupt_request & CPU_INTERRUPT_HARD + && (armv7m_nvic_can_take_pending_exception(env->nvic))) { + cs->exception_index = EXCP_IRQ; + cc->tcg_ops->do_interrupt(cs); + ret = true; + } + return ret; +} + +#endif /* !CONFIG_USER_ONLY */ + +static void cortex_m0_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + set_feature(&cpu->env, ARM_FEATURE_V6); + set_feature(&cpu->env, ARM_FEATURE_M); + + cpu->midr = 0x410cc200; + + /* + * These ID register values are not guest visible, because + * we do not implement the Main Extension. They must be set + * to values corresponding to the Cortex-M0's implemented + * features, because QEMU generally controls its emulation + * by looking at ID register fields. We use the same values as + * for the M3. + */ + cpu->isar.id_pfr0 = 0x00000030; + cpu->isar.id_pfr1 = 0x00000200; + cpu->isar.id_dfr0 = 0x00100000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00000030; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x00000000; + cpu->isar.id_mmfr3 = 0x00000000; + cpu->isar.id_isar0 = 0x01141110; + cpu->isar.id_isar1 = 0x02111000; + cpu->isar.id_isar2 = 0x21112231; + cpu->isar.id_isar3 = 0x01111110; + cpu->isar.id_isar4 = 0x01310102; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; +} + +static void cortex_m3_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + set_feature(&cpu->env, ARM_FEATURE_V7); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + cpu->midr = 0x410fc231; + cpu->pmsav7_dregion = 8; + cpu->isar.id_pfr0 = 0x00000030; + cpu->isar.id_pfr1 = 0x00000200; + cpu->isar.id_dfr0 = 0x00100000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00000030; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x00000000; + cpu->isar.id_mmfr3 = 0x00000000; + cpu->isar.id_isar0 = 0x01141110; + cpu->isar.id_isar1 = 0x02111000; + cpu->isar.id_isar2 = 0x21112231; + cpu->isar.id_isar3 = 0x01111110; + cpu->isar.id_isar4 = 0x01310102; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; +} + +static void cortex_m4_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V7); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fc240; /* r0p0 */ + cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; + cpu->isar.id_pfr0 = 0x00000030; + cpu->isar.id_pfr1 = 0x00000200; + cpu->isar.id_dfr0 = 0x00100000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00000030; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x00000000; + cpu->isar.id_mmfr3 = 0x00000000; + cpu->isar.id_isar0 = 0x01141110; + cpu->isar.id_isar1 = 0x02111000; + cpu->isar.id_isar2 = 0x21112231; + cpu->isar.id_isar3 = 0x01111110; + cpu->isar.id_isar4 = 0x01310102; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; +} + +static void cortex_m7_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V7); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x411fc272; /* r1p2 */ + cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12000011; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x00000030; + cpu->isar.id_pfr1 = 0x00000200; + cpu->isar.id_dfr0 = 0x00100000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00100030; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000000; + cpu->isar.id_isar0 = 0x01101110; + cpu->isar.id_isar1 = 0x02112000; + cpu->isar.id_isar2 = 0x20232231; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; +} + +static void cortex_m33_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd213; /* r0p3 */ + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x00000030; + cpu->isar.id_pfr1 = 0x00000210; + cpu->isar.id_dfr0 = 0x00200000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00101F40; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000000; + cpu->isar.id_isar0 = 0x01101110; + cpu->isar.id_isar1 = 0x02212000; + cpu->isar.id_isar2 = 0x20232232; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; + cpu->clidr = 0x00000000; + cpu->ctr = 0x8000c000; +} + +static void cortex_m55_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_V8_1M); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd221; /* r0p1 */ + cpu->revidr = 0; + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + /* These are the MVFR* values for the FPU + full MVE configuration */ + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12100211; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x20000030; + cpu->isar.id_pfr1 = 0x00000230; + cpu->isar.id_dfr0 = 0x10200000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00111040; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000011; + cpu->isar.id_isar0 = 0x01103110; + cpu->isar.id_isar1 = 0x02212000; + cpu->isar.id_isar2 = 0x20232232; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; + cpu->clidr = 0x00000000; /* caches not implemented */ + cpu->ctr = 0x8303c003; +} + +static const TCGCPUOps arm_v7m_tcg_ops = { + .initialize = arm_translate_init, + .synchronize_from_tb = arm_cpu_synchronize_from_tb, + .debug_excp_handler = arm_debug_excp_handler, + .restore_state_to_opc = arm_restore_state_to_opc, + +#ifdef CONFIG_USER_ONLY + .record_sigsegv = arm_cpu_record_sigsegv, + .record_sigbus = arm_cpu_record_sigbus, +#else + .tlb_fill = arm_cpu_tlb_fill, + .cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt, + .do_interrupt = arm_v7m_cpu_do_interrupt, + .do_transaction_failed = arm_cpu_do_transaction_failed, + .do_unaligned_access = arm_cpu_do_unaligned_access, + .adjust_watchpoint_address = arm_adjust_watchpoint_address, + .debug_check_watchpoint = arm_debug_check_watchpoint, + .debug_check_breakpoint = arm_debug_check_breakpoint, +#endif /* !CONFIG_USER_ONLY */ +}; + +static void arm_v7m_class_init(ObjectClass *oc, void *data) +{ + ARMCPUClass *acc = ARM_CPU_CLASS(oc); + CPUClass *cc = CPU_CLASS(oc); + + acc->info = data; + cc->tcg_ops = &arm_v7m_tcg_ops; + cc->gdb_core_xml_file = "arm-m-profile.xml"; +} + +static const ARMCPUInfo arm_v7m_cpus[] = { + { .name = "cortex-m0", .initfn = cortex_m0_initfn, + .class_init = arm_v7m_class_init }, + { .name = "cortex-m3", .initfn = cortex_m3_initfn, + .class_init = arm_v7m_class_init }, + { .name = "cortex-m4", .initfn = cortex_m4_initfn, + .class_init = arm_v7m_class_init }, + { .name = "cortex-m7", .initfn = cortex_m7_initfn, + .class_init = arm_v7m_class_init }, + { .name = "cortex-m33", .initfn = cortex_m33_initfn, + .class_init = arm_v7m_class_init }, + { .name = "cortex-m55", .initfn = cortex_m55_initfn, + .class_init = arm_v7m_class_init }, +}; + +static void arm_v7m_cpu_register_types(void) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(arm_v7m_cpus); ++i) { + arm_cpu_register(&arm_v7m_cpus[i]); + } +} + +type_init(arm_v7m_cpu_register_types) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" -#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) -#include "hw/intc/armv7m_nvic.h" -#endif /* Share AArch32 -cpu max features with AArch64. */ @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) /* CPU models. These are not needed for the AArch64 linux-user build. */ #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) -#if !defined(CONFIG_USER_ONLY) -static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request) -{ - CPUClass *cc = CPU_GET_CLASS(cs); - ARMCPU *cpu = ARM_CPU(cs); - CPUARMState *env = &cpu->env; - bool ret = false; - - /* - * ARMv7-M interrupt masking works differently than -A or -R. - * There is no FIQ/IRQ distinction. Instead of I and F bits - * masking FIQ and IRQ interrupts, an exception is taken only - * if it is higher priority than the current execution priority - * (which depends on state like BASEPRI, FAULTMASK and the - * currently active exception). - */ - if (interrupt_request & CPU_INTERRUPT_HARD - && (armv7m_nvic_can_take_pending_exception(env->nvic))) { - cs->exception_index = EXCP_IRQ; - cc->tcg_ops->do_interrupt(cs); - ret = true; - } - return ret; -} -#endif /* !CONFIG_USER_ONLY */ - static void arm926_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void cortex_a15_initfn(Object *obj) define_arm_cp_regs(cpu, cortexa15_cp_reginfo); } -static void cortex_m0_initfn(Object *obj) -{ - ARMCPU *cpu = ARM_CPU(obj); - set_feature(&cpu->env, ARM_FEATURE_V6); - set_feature(&cpu->env, ARM_FEATURE_M); - - cpu->midr = 0x410cc200; - - /* - * These ID register values are not guest visible, because - * we do not implement the Main Extension. They must be set - * to values corresponding to the Cortex-M0's implemented - * features, because QEMU generally controls its emulation - * by looking at ID register fields. We use the same values as - * for the M3. - */ - cpu->isar.id_pfr0 = 0x00000030; - cpu->isar.id_pfr1 = 0x00000200; - cpu->isar.id_dfr0 = 0x00100000; - cpu->id_afr0 = 0x00000000; - cpu->isar.id_mmfr0 = 0x00000030; - cpu->isar.id_mmfr1 = 0x00000000; - cpu->isar.id_mmfr2 = 0x00000000; - cpu->isar.id_mmfr3 = 0x00000000; - cpu->isar.id_isar0 = 0x01141110; - cpu->isar.id_isar1 = 0x02111000; - cpu->isar.id_isar2 = 0x21112231; - cpu->isar.id_isar3 = 0x01111110; - cpu->isar.id_isar4 = 0x01310102; - cpu->isar.id_isar5 = 0x00000000; - cpu->isar.id_isar6 = 0x00000000; -} - -static void cortex_m3_initfn(Object *obj) -{ - ARMCPU *cpu = ARM_CPU(obj); - set_feature(&cpu->env, ARM_FEATURE_V7); - set_feature(&cpu->env, ARM_FEATURE_M); - set_feature(&cpu->env, ARM_FEATURE_M_MAIN); - cpu->midr = 0x410fc231; - cpu->pmsav7_dregion = 8; - cpu->isar.id_pfr0 = 0x00000030; - cpu->isar.id_pfr1 = 0x00000200; - cpu->isar.id_dfr0 = 0x00100000; - cpu->id_afr0 = 0x00000000; - cpu->isar.id_mmfr0 = 0x00000030; - cpu->isar.id_mmfr1 = 0x00000000; - cpu->isar.id_mmfr2 = 0x00000000; - cpu->isar.id_mmfr3 = 0x00000000; - cpu->isar.id_isar0 = 0x01141110; - cpu->isar.id_isar1 = 0x02111000; - cpu->isar.id_isar2 = 0x21112231; - cpu->isar.id_isar3 = 0x01111110; - cpu->isar.id_isar4 = 0x01310102; - cpu->isar.id_isar5 = 0x00000000; - cpu->isar.id_isar6 = 0x00000000; -} - -static void cortex_m4_initfn(Object *obj) -{ - ARMCPU *cpu = ARM_CPU(obj); - - set_feature(&cpu->env, ARM_FEATURE_V7); - set_feature(&cpu->env, ARM_FEATURE_M); - set_feature(&cpu->env, ARM_FEATURE_M_MAIN); - set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); - cpu->midr = 0x410fc240; /* r0p0 */ - cpu->pmsav7_dregion = 8; - cpu->isar.mvfr0 = 0x10110021; - cpu->isar.mvfr1 = 0x11000011; - cpu->isar.mvfr2 = 0x00000000; - cpu->isar.id_pfr0 = 0x00000030; - cpu->isar.id_pfr1 = 0x00000200; - cpu->isar.id_dfr0 = 0x00100000; - cpu->id_afr0 = 0x00000000; - cpu->isar.id_mmfr0 = 0x00000030; - cpu->isar.id_mmfr1 = 0x00000000; - cpu->isar.id_mmfr2 = 0x00000000; - cpu->isar.id_mmfr3 = 0x00000000; - cpu->isar.id_isar0 = 0x01141110; - cpu->isar.id_isar1 = 0x02111000; - cpu->isar.id_isar2 = 0x21112231; - cpu->isar.id_isar3 = 0x01111110; - cpu->isar.id_isar4 = 0x01310102; - cpu->isar.id_isar5 = 0x00000000; - cpu->isar.id_isar6 = 0x00000000; -} - -static void cortex_m7_initfn(Object *obj) -{ - ARMCPU *cpu = ARM_CPU(obj); - - set_feature(&cpu->env, ARM_FEATURE_V7); - set_feature(&cpu->env, ARM_FEATURE_M); - set_feature(&cpu->env, ARM_FEATURE_M_MAIN); - set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); - cpu->midr = 0x411fc272; /* r1p2 */ - cpu->pmsav7_dregion = 8; - cpu->isar.mvfr0 = 0x10110221; - cpu->isar.mvfr1 = 0x12000011; - cpu->isar.mvfr2 = 0x00000040; - cpu->isar.id_pfr0 = 0x00000030; - cpu->isar.id_pfr1 = 0x00000200; - cpu->isar.id_dfr0 = 0x00100000; - cpu->id_afr0 = 0x00000000; - cpu->isar.id_mmfr0 = 0x00100030; - cpu->isar.id_mmfr1 = 0x00000000; - cpu->isar.id_mmfr2 = 0x01000000; - cpu->isar.id_mmfr3 = 0x00000000; - cpu->isar.id_isar0 = 0x01101110; - cpu->isar.id_isar1 = 0x02112000; - cpu->isar.id_isar2 = 0x20232231; - cpu->isar.id_isar3 = 0x01111131; - cpu->isar.id_isar4 = 0x01310132; - cpu->isar.id_isar5 = 0x00000000; - cpu->isar.id_isar6 = 0x00000000; -} - -static void cortex_m33_initfn(Object *obj) -{ - ARMCPU *cpu = ARM_CPU(obj); - - set_feature(&cpu->env, ARM_FEATURE_V8); - set_feature(&cpu->env, ARM_FEATURE_M); - set_feature(&cpu->env, ARM_FEATURE_M_MAIN); - set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); - set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); - cpu->midr = 0x410fd213; /* r0p3 */ - cpu->pmsav7_dregion = 16; - cpu->sau_sregion = 8; - cpu->isar.mvfr0 = 0x10110021; - cpu->isar.mvfr1 = 0x11000011; - cpu->isar.mvfr2 = 0x00000040; - cpu->isar.id_pfr0 = 0x00000030; - cpu->isar.id_pfr1 = 0x00000210; - cpu->isar.id_dfr0 = 0x00200000; - cpu->id_afr0 = 0x00000000; - cpu->isar.id_mmfr0 = 0x00101F40; - cpu->isar.id_mmfr1 = 0x00000000; - cpu->isar.id_mmfr2 = 0x01000000; - cpu->isar.id_mmfr3 = 0x00000000; - cpu->isar.id_isar0 = 0x01101110; - cpu->isar.id_isar1 = 0x02212000; - cpu->isar.id_isar2 = 0x20232232; - cpu->isar.id_isar3 = 0x01111131; - cpu->isar.id_isar4 = 0x01310132; - cpu->isar.id_isar5 = 0x00000000; - cpu->isar.id_isar6 = 0x00000000; - cpu->clidr = 0x00000000; - cpu->ctr = 0x8000c000; -} - -static void cortex_m55_initfn(Object *obj) -{ - ARMCPU *cpu = ARM_CPU(obj); - - set_feature(&cpu->env, ARM_FEATURE_V8); - set_feature(&cpu->env, ARM_FEATURE_V8_1M); - set_feature(&cpu->env, ARM_FEATURE_M); - set_feature(&cpu->env, ARM_FEATURE_M_MAIN); - set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); - set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); - cpu->midr = 0x410fd221; /* r0p1 */ - cpu->revidr = 0; - cpu->pmsav7_dregion = 16; - cpu->sau_sregion = 8; - /* These are the MVFR* values for the FPU + full MVE configuration */ - cpu->isar.mvfr0 = 0x10110221; - cpu->isar.mvfr1 = 0x12100211; - cpu->isar.mvfr2 = 0x00000040; - cpu->isar.id_pfr0 = 0x20000030; - cpu->isar.id_pfr1 = 0x00000230; - cpu->isar.id_dfr0 = 0x10200000; - cpu->id_afr0 = 0x00000000; - cpu->isar.id_mmfr0 = 0x00111040; - cpu->isar.id_mmfr1 = 0x00000000; - cpu->isar.id_mmfr2 = 0x01000000; - cpu->isar.id_mmfr3 = 0x00000011; - cpu->isar.id_isar0 = 0x01103110; - cpu->isar.id_isar1 = 0x02212000; - cpu->isar.id_isar2 = 0x20232232; - cpu->isar.id_isar3 = 0x01111131; - cpu->isar.id_isar4 = 0x01310132; - cpu->isar.id_isar5 = 0x00000000; - cpu->isar.id_isar6 = 0x00000000; - cpu->clidr = 0x00000000; /* caches not implemented */ - cpu->ctr = 0x8303c003; -} - static const ARMCPRegInfo cortexr5_cp_reginfo[] = { /* Dummy the TCM region regs for the moment */ { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static void pxa270c5_initfn(Object *obj) cpu->reset_sctlr = 0x00000078; } -static const TCGCPUOps arm_v7m_tcg_ops = { - .initialize = arm_translate_init, - .synchronize_from_tb = arm_cpu_synchronize_from_tb, - .debug_excp_handler = arm_debug_excp_handler, - .restore_state_to_opc = arm_restore_state_to_opc, - -#ifdef CONFIG_USER_ONLY - .record_sigsegv = arm_cpu_record_sigsegv, - .record_sigbus = arm_cpu_record_sigbus, -#else - .tlb_fill = arm_cpu_tlb_fill, - .cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt, - .do_interrupt = arm_v7m_cpu_do_interrupt, - .do_transaction_failed = arm_cpu_do_transaction_failed, - .do_unaligned_access = arm_cpu_do_unaligned_access, - .adjust_watchpoint_address = arm_adjust_watchpoint_address, - .debug_check_watchpoint = arm_debug_check_watchpoint, - .debug_check_breakpoint = arm_debug_check_breakpoint, -#endif /* !CONFIG_USER_ONLY */ -}; - -static void arm_v7m_class_init(ObjectClass *oc, void *data) -{ - ARMCPUClass *acc = ARM_CPU_CLASS(oc); - CPUClass *cc = CPU_CLASS(oc); - - acc->info = data; - cc->tcg_ops = &arm_v7m_tcg_ops; - cc->gdb_core_xml_file = "arm-m-profile.xml"; -} - #ifndef TARGET_AARCH64 /* * -cpu max: a CPU with as many features enabled as our emulation supports. @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { { .name = "cortex-a8", .initfn = cortex_a8_initfn }, { .name = "cortex-a9", .initfn = cortex_a9_initfn }, { .name = "cortex-a15", .initfn = cortex_a15_initfn }, - { .name = "cortex-m0", .initfn = cortex_m0_initfn, - .class_init = arm_v7m_class_init }, - { .name = "cortex-m3", .initfn = cortex_m3_initfn, - .class_init = arm_v7m_class_init }, - { .name = "cortex-m4", .initfn = cortex_m4_initfn, - .class_init = arm_v7m_class_init }, - { .name = "cortex-m7", .initfn = cortex_m7_initfn, - .class_init = arm_v7m_class_init }, - { .name = "cortex-m33", .initfn = cortex_m33_initfn, - .class_init = arm_v7m_class_init }, - { .name = "cortex-m55", .initfn = cortex_m55_initfn, - .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, { .name = "cortex-r52", .initfn = cortex_r52_initfn }, diff --git a/target/arm/meson.build b/target/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/meson.build +++ b/target/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_system_ss.add(files( 'ptw.c', )) +arm_user_ss = ss.source_set() + subdir('hvf') if 'CONFIG_TCG' in config_all_accel @@ -XXX,XX +XXX,XX @@ endif target_arch += {'arm': arm_ss} target_system_arch += {'arm': arm_system_ss} +target_user_arch += {'arm': arm_user_ss} diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_true: files( arm_system_ss.add(files( 'psci.c', )) + +arm_system_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('cpu-v7m.c')) +arm_user_ss.add(when: 'TARGET_AARCH64', if_false: files('cpu-v7m.c')) -- 2.34.1